1535 files changed, 572700 insertions, 0 deletions

diff --git a/gdb/29k-share/README b/gdb/29k-share/README
new file mode 100644
index 0000000..5e19715
--- /dev/null
+++ b/gdb/29k-share/README
@@ -0,0 +1,9 @@
+The files in this directory are shared with other debuggers and
+debug interfaces that use Advanced Micro Devices' UDI (universal debug
+interface) protocol.  The protocol provides a common interface among
+debuggers, logic analyzers, emulators, and embedded systems that use
+AMD 29000 family processors.
+
+Do not change these files without coordinating with Advanced Micro
+Devices, Embedded Processor Division, 5204 E. Ben White Blvd, Austin, TX 78741.
+Maybe postmaster@cayman.amd.com can direct you to the current maintainers.
diff --git a/gdb/29k-share/udi/udi2go32.c b/gdb/29k-share/udi/udi2go32.c
new file mode 100644
index 0000000..63d98ae
--- /dev/null
+++ b/gdb/29k-share/udi/udi2go32.c
@@ -0,0 +1,607 @@
+/*
+
+Interface from UDI calls in 32-bit mode to go32 in 16-bit mode. 
+Communication is done through a single interrupt vector, which passes
+data through two linear buffers. 
+
+Call:
+	AH  = 0xfe
+	AL  = UDI function number
+	ECX = IN length
+	ESI = pointer to IN buffer
+	EDI = pointer to OUT buffer
+
+Return:
+	EAX = return value of UDI function
+
+Vector:
+	0x21
+
+*/
+#ifdef __GO32__
+
+#include <stdlib.h>
+#include "udiproc.h"
+#include "udisoc.h"
+
+char dfe_errmsg[500];
+
+static char in_buffer[4096];
+static char out_buffer[4096];
+static char *in_ptr;
+static char *out_ptr;
+
+#define IN_INIT()		in_ptr = in_buffer
+#define IN_VAL(t,v)		*((t *)in_ptr)++ = v
+#define IN_DATA(ptr, cnt)	memcpy(in_ptr, ptr, cnt), in_ptr += cnt
+
+#define OUT_INIT()		out_ptr = out_buffer
+#define OUT_VAL(t)		(*((t *)out_ptr)++)
+#define OUT_DATA(ptr, cnt)	memcpy(ptr, out_ptr, cnt), out_ptr += cnt
+
+static int DO_CALL(int function)
+{
+  asm("pushl %esi");
+  asm("pushl %edi");
+  asm("movb %0, %%al" : : "g" (function));
+  asm("movl _in_ptr, %ecx");
+  asm("movl $_in_buffer, %esi");
+  asm("subl %esi, %ecx");
+  asm("movl $_out_buffer, %edi");
+  asm("movb $0xfe, %ah");
+  asm("int $0x21");
+  asm("popl %edi");
+  asm("popl %esi");
+}
+
+/*----------------------------------------------------------------------*/
+
+#ifdef TEST_UDI
+int main()
+{
+  int r;
+  long p2;
+  short p1;
+  IN_INIT();
+  IN_VAL(long, 11111111);
+  IN_VAL(short, 2222);
+  IN_DATA("Hello, world\n", 17);
+
+  r = DO_CALL(42);
+
+  OUT_INIT();
+  p1 = OUT_VAL(short);
+  p2 = OUT_VAL(long);
+  printf("main: p1=%d p2=%d rv=%d\n", p1, p2, r);
+  return r;
+}
+#endif
+
+/*----------------------------------------------------------------------*/
+
+unsupported(char *s)
+{
+  printf("unsupported UDI host call %s\n", s);
+  abort();
+}
+
+UDIError UDIConnect (
+  char		*Configuration,		/* In */
+  UDISessionId	*Session		/* Out */
+  )
+{
+  int r;
+  out_buffer[0] = 0; /* DJ - test */
+  IN_INIT();
+  IN_DATA(Configuration, strlen(Configuration)+1);
+  
+  r = DO_CALL(UDIConnect_c);
+
+  OUT_INIT();  
+  *Session = OUT_VAL(UDISessionId);
+  return r;
+}
+
+UDIError UDIDisconnect (
+  UDISessionId	Session,		/* In */
+  UDIBool	Terminate		/* In */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(UDISessionId, Session);
+  IN_VAL(UDIBool, Terminate);
+  
+  return DO_CALL(UDIDisconnect_c);
+}
+
+UDIError UDISetCurrentConnection (
+  UDISessionId	Session			/* In */
+  )
+{
+  IN_INIT();
+  IN_VAL(UDISessionId, Session);
+  
+  return DO_CALL(UDISetCurrentConnection_c);
+}
+
+UDIError UDICapabilities (
+  UDIUInt32	*TIPId,			/* Out */
+  UDIUInt32	*TargetId,		/* Out */
+  UDIUInt32	DFEId,			/* In */
+  UDIUInt32	DFE,			/* In */
+  UDIUInt32	*TIP,			/* Out */
+  UDIUInt32	*DFEIPCId,		/* Out */
+  UDIUInt32	*TIPIPCId,		/* Out */
+  char		*TIPString		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(UDIUInt32, DFEId);
+  IN_VAL(UDIUInt32, DFE);
+  r = DO_CALL(UDICapabilities_c);
+  OUT_INIT();
+  *TIPId = OUT_VAL(UDIUInt32);
+  *TargetId = OUT_VAL(UDIUInt32);
+  *TIP = OUT_VAL(UDIUInt32);
+  *DFEIPCId = OUT_VAL(UDIUInt32);
+  *TIPIPCId = OUT_VAL(UDIUInt32);
+  strcpy(TIPString, out_ptr);
+  return r;
+}
+
+UDIError UDIEnumerateTIPs (
+  UDIInt	(*UDIETCallback)	/* In */
+    ( char *Configuration )	/* In to callback() */
+  )
+{
+  UDIETCallback("montip.exe");
+}
+
+UDIError UDIGetErrorMsg (
+  UDIError	ErrorCode,		/* In */
+  UDISizeT	MsgSize,		/* In */
+  char		*Msg,			/* Out */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  if (MsgSize > 4000)
+    MsgSize = 4000;
+  IN_INIT();
+  IN_VAL(UDIError, ErrorCode);
+  IN_VAL(UDISizeT, MsgSize);
+  
+  r = DO_CALL(UDIGetErrorMsg_c);
+  
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  OUT_DATA(Msg, *CountDone);
+  return r;
+}
+
+UDIError UDIGetTargetConfig (
+  UDIMemoryRange KnownMemory[],		/* Out */
+  UDIInt	*NumberOfRanges,	/* In/Out */
+  UDIUInt32	ChipVersions[],		/* Out */
+  UDIInt	*NumberOfChips		/* In/Out */
+  )
+{
+  int r, i;
+  int nr = *NumberOfRanges;
+  int nc = *NumberOfChips;
+  IN_INIT();
+  IN_VAL(UDIInt, *NumberOfRanges);
+  IN_VAL(UDIInt, *NumberOfChips);
+  r = DO_CALL(UDIGetTargetConfig_c);
+  if (r == UDIErrorIncomplete)
+    return r;
+  OUT_INIT();
+  *NumberOfRanges = OUT_VAL(UDIInt);
+  *NumberOfChips = OUT_VAL(UDIInt);
+  for (i=0; i<nr; i++)
+  {
+    KnownMemory[i].Space = OUT_VAL(short);
+    KnownMemory[i].Offset = OUT_VAL(CPUOffset);
+    KnownMemory[i].Size = OUT_VAL(CPUSizeT);
+  }
+  for (i=0; i<nc; i++)
+  {
+    ChipVersions[i] = OUT_VAL(UDIUInt32);
+  }
+  return r;
+}
+
+UDIError UDICreateProcess (
+  UDIPId	*PId			/* Out */
+  )
+{
+  int r = DO_CALL(UDICreateProcess_c);
+
+  OUT_INIT();
+  *PId = OUT_VAL(UDIPId);
+
+  return r;
+}
+
+UDIError UDISetCurrentProcess (
+  UDIPId	PId			/* In */
+  )
+{
+  IN_INIT();
+  IN_VAL(UDIPId, PId);
+
+  return DO_CALL(UDISetCurrentProcess_c);
+}
+
+UDIError UDIDestroyProcess (
+  UDIPId	PId			/* In */
+  )
+{
+  IN_INIT();
+  IN_VAL(UDIPId, PId);
+
+  return DO_CALL(UDIDestroyProcess_c);
+}
+
+UDIError UDIInitializeProcess (
+  UDIMemoryRange ProcessMemory[],	/* In */
+  UDIInt	NumberOfRanges,		/* In */
+  UDIResource	EntryPoint,		/* In */
+  CPUSizeT	StackSizes[],		/* In */
+  UDIInt	NumberOfStacks,		/* In */
+  char		*ArgString		/* In */
+  )
+{
+  int i, r;
+  IN_INIT();
+  IN_VAL(UDIInt, NumberOfRanges);
+  for (i=0; i<NumberOfRanges; i++)
+  {
+    IN_VAL(short, ProcessMemory[i].Space);
+    IN_VAL(CPUOffset, ProcessMemory[i].Offset);
+    IN_VAL(CPUSizeT, ProcessMemory[i].Size);
+  }
+  IN_VAL(short, EntryPoint.Space);
+  IN_VAL(CPUOffset, EntryPoint.Offset);
+  IN_VAL(UDIInt, NumberOfStacks);
+  for (i=0; i<NumberOfStacks; i++)
+    IN_VAL(CPUSizeT, StackSizes[i]);
+  IN_DATA(ArgString, strlen(ArgString)+1);
+
+  return DO_CALL(UDIInitializeProcess_c);
+}
+
+UDIError UDIRead (
+  UDIResource	From,			/* In */
+  UDIHostMemPtr	To,			/* Out */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	HostEndian		/* In */
+  )
+{
+  int cleft = Count, cthis, dthis;
+  int cdone = 0, r, bsize=2048/Size;
+  
+  while (cleft)
+  {
+    cthis = (cleft<bsize) ? cleft : bsize;
+    IN_INIT();
+    IN_VAL(short, From.Space);
+    IN_VAL(CPUOffset, From.Offset);
+    IN_VAL(UDICount, cthis);
+    IN_VAL(UDISizeT, Size);
+    IN_VAL(UDIBool, HostEndian);
+
+    r = DO_CALL(UDIRead_c);
+
+    OUT_INIT();
+    dthis = OUT_VAL(UDICount);
+    OUT_DATA(To, dthis*Size);
+    cdone += dthis;
+    To += dthis*Size;
+
+    if (r != UDINoError)
+    {
+      *CountDone = cdone;
+      return r;
+    }
+    cleft -= cthis;
+  }
+  *CountDone = cdone;
+  return UDINoError;
+}
+
+UDIError UDIWrite (
+  UDIHostMemPtr	From,			/* In */
+  UDIResource	To,			/* In */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	HostEndian		/* In */
+  )
+{
+  int cleft = Count, cthis, dthis;
+  int cdone = 0, r, bsize=2048/Size;
+  
+  while (cleft)
+  {
+    cthis = (cleft<bsize) ? cleft : bsize;
+    IN_INIT();
+    IN_VAL(short, To.Space);
+    IN_VAL(CPUOffset, To.Offset);
+    IN_VAL(UDICount, cthis);
+    IN_VAL(UDISizeT, Size);
+    IN_VAL(UDIBool, HostEndian);
+    IN_DATA(From, cthis*Size);
+    From += cthis*Size;
+    
+    r = DO_CALL(UDIWrite_c);
+
+    OUT_INIT();
+    cdone += OUT_VAL(UDICount);
+
+    if (r != UDINoError)
+    {
+      *CountDone = cdone;
+      return r;
+    }
+    cleft -= cthis;
+  }
+  *CountDone = cdone;
+  return UDINoError;
+}
+
+UDIError UDICopy (
+  UDIResource	From,			/* In */
+  UDIResource	To,			/* In */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	Direction		/* In */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(short, From.Space);
+  IN_VAL(CPUOffset, From.Offset);
+  IN_VAL(short, To.Space);
+  IN_VAL(CPUOffset, To.Offset);
+  IN_VAL(UDICount, Count);
+  IN_VAL(UDISizeT, Size);
+  IN_VAL(UDIBool, Direction);
+  
+  r = DO_CALL(UDICopy_c);
+  
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDICount);
+  
+  return r;
+}
+
+UDIError UDIExecute (
+  void
+  )
+{
+  return DO_CALL(UDIExecute_c);
+}
+
+UDIError UDIStep (
+  UDIUInt32	Steps,			/* In */
+  UDIStepType   StepType,		/* In */
+  UDIRange      Range			/* In */
+  )
+{
+  IN_INIT();
+  IN_VAL(UDIUInt32, Steps);
+  IN_VAL(UDIStepType, StepType);
+  IN_VAL(UDIRange, Range);
+  
+  return DO_CALL(UDIStep_c);
+}
+
+UDIVoid UDIStop (
+  void
+  )
+{
+  DO_CALL(UDIStop_c);
+}
+
+UDIError UDIWait (
+  UDIInt32	MaxTime,		/* In */
+  UDIPId	*PId,			/* Out */
+  UDIUInt32	*StopReason		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(UDIInt32, MaxTime);
+  r = DO_CALL(UDIWait_c);
+  OUT_INIT();
+  *PId = OUT_VAL(UDIPId);
+  *StopReason = OUT_VAL(UDIUInt32);
+  return r;
+}
+
+UDIError UDISetBreakpoint (
+  UDIResource	Addr,			/* In */
+  UDIInt32	PassCount,		/* In */
+  UDIBreakType	Type,			/* In */
+  UDIBreakId	*BreakId		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(short, Addr.Space);
+  IN_VAL(CPUOffset, Addr.Offset);
+  IN_VAL(UDIInt32, PassCount);
+  IN_VAL(UDIBreakType, Type);
+  
+  r = DO_CALL(UDISetBreakpoint_c);
+  
+  OUT_INIT();
+  *BreakId = OUT_VAL(UDIBreakId);
+  return r;
+}
+
+UDIError UDIQueryBreakpoint (
+  UDIBreakId	BreakId,		/* In */
+  UDIResource	*Addr,			/* Out */
+  UDIInt32	*PassCount,		/* Out */
+  UDIBreakType	*Type,			/* Out */
+  UDIInt32	*CurrentCount		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  IN_VAL(UDIBreakId, BreakId);
+  
+  r = DO_CALL(UDIQueryBreakpoint_c);
+  
+  OUT_INIT();
+  Addr->Space = OUT_VAL(short);
+  Addr->Offset = OUT_VAL(CPUOffset);
+  *PassCount = OUT_VAL(UDIInt32);
+  *Type = OUT_VAL(UDIBreakType);
+  *CurrentCount = OUT_VAL(UDIInt32);
+  
+  return r;
+}
+
+UDIError UDIClearBreakpoint (
+  UDIBreakId	BreakId			/* In */
+  )
+{
+  IN_INIT();
+  IN_VAL(UDIBreakId, BreakId);
+  
+  return DO_CALL(UDIClearBreakpoint_c);
+}
+
+UDIError UDIGetStdout (
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  if (BufSize > 4000)
+    BufSize = 4000;
+  IN_VAL(UDISizeT,BufSize);
+  r = DO_CALL(UDIGetStdout_c);
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  if (*CountDone <= BufSize)
+    OUT_DATA(Buf, *CountDone);
+  return r;
+}
+
+UDIError UDIGetStderr (
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  if (BufSize > 4000)
+    BufSize = 4000;
+  IN_VAL(UDISizeT,BufSize);
+  r = DO_CALL(UDIGetStderr_c);
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  OUT_DATA(Buf, *CountDone);
+  return r;
+}
+
+UDIError UDIPutStdin (
+  UDIHostMemPtr	Buf,			/* In */
+  UDISizeT	Count,			/* In */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  if (Count > 4000)
+    Count = 4000;
+  IN_VAL(UDISizeT,Count);
+  IN_DATA(Buf, Count);
+  r = DO_CALL(UDIPutStdin_c);
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  return r;
+}
+
+UDIError UDIStdinMode (
+  UDIMode	*Mode			/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  r = DO_CALL(UDIStdinMode_c);
+  OUT_INIT();
+  *Mode = OUT_VAL(UDIMode);
+  return r;
+}
+
+UDIError UDIPutTrans (
+  UDIHostMemPtr	Buf,			/* In */
+  UDISizeT	Count,			/* In */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  if (Count > 4000)
+    Count = 4000;
+  IN_VAL(UDISizeT,Count);
+  IN_DATA(Buf, Count);
+  r = DO_CALL(UDIPutTrans_c);
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  return r;
+}
+
+UDIError UDIGetTrans (
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  if (BufSize > 4000)
+    BufSize = 4000;
+  IN_VAL(UDISizeT,BufSize);
+  r = DO_CALL(UDIGetTrans_c);
+  OUT_INIT();
+  *CountDone = OUT_VAL(UDISizeT);
+  OUT_DATA(Buf, *CountDone);
+  return r;
+}
+
+UDIError UDITransMode (
+  UDIMode	*Mode			/* Out */
+  )
+{
+  int r;
+  IN_INIT();
+  r = DO_CALL(UDITransMode_c);
+  OUT_INIT();
+  *Mode = OUT_VAL(UDIMode);
+  return r;
+}
+
+#define DFEIPCIdCompany 0x0001	/* Company ID AMD */
+#define DFEIPCIdProduct 0x1	/* Product ID 0 */
+#define DFEIPCIdVersion 0x125	/* 1.2.5 */
+
+unsigned UDIGetDFEIPCId ()
+{
+    return((((UDIUInt32)DFEIPCIdCompany) << 16) |(DFEIPCIdProduct << 12) | DFEIPCIdVersion);
+}
+
+#endif /* __GO32__ */
diff --git a/gdb/29k-share/udi/udiids.h b/gdb/29k-share/udi/udiids.h
new file mode 100644
index 0000000..5f805e4
--- /dev/null
+++ b/gdb/29k-share/udi/udiids.h
@@ -0,0 +1,48 @@
+/* This file contains the DFE and TIP IDs to be used by AMD products for
+   the UDICapabilities call.
+   
+   Copyright 1993 Free Software Foundation, Inc.
+   
+   This file is part of GDB.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+	/* Company Codes -- AMD assigns these */
+#define UDICompanyCode_AMD 1
+
+	/* Build a UDIID given a CompanyProdCode and 3 version pieces */
+#define UDIID(CompanyProdCode, v1,v2,v3) ((((CompanyProdCode) & 0xfffff)<<12)+\
+				  (((v1)&0xf)<<8) + (((v2)&0xf)<<4) + ((v3)&0xf)) 
+
+
+	/* Extract a CompanyProdCode or a Version from a UDIID */
+#define UDIID_CompanyProdCode(id) (((id)>>12) & 0xfffff)
+#define UDIID_Version(id) ((id)&0xfff)
+
+
+#define UDIAMDProduct(ProdCode) ((UDICompanyCode_AMD<<4) + (ProdCode&0xf))
+
+	/* AMD DFE Product Codes */
+#define UDIProductCode_Mondfe UDIAMDProduct(0)
+#define UDIProductCode_XRAY   UDIAMDProduct(1)
+#define UDIProductCode_TIPTester  UDIAMDProduct(2)
+
+	/* AMD TIP Product Codes (need not be distinct from DFE Product Codes) */
+#define UDIProductCode_Montip UDIAMDProduct(0)
+#define UDIProductCode_Isstip UDIAMDProduct(1)
+
+
+#define UDILatestVersion 0x120	/* UDI 1.2.0, can be used in DFE and TIP desired UDI params */
+
diff --git a/gdb/29k-share/udi/udip2soc.c b/gdb/29k-share/udi/udip2soc.c
new file mode 100644
index 0000000..969e850
--- /dev/null
+++ b/gdb/29k-share/udi/udip2soc.c
@@ -0,0 +1,1250 @@
+/* Copyright 1993 Free Software Foundation, Inc.
+   
+   This file is part of GDB.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+   
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+static 	char udip2soc_c[]="@(#)udip2soc.c	2.11  Daniel Mann";
+static  char udip2soc_c_AMD[]="@(#)udip2soc.c	2.8, AMD";
+/* 
+*       This module converts UDI Procedural calls into
+*	UDI socket messages for UNIX. 
+*	It is used by DFE client processes
+********************************************************************** HISTORY
+*/
+/* This is all unneeded on DOS machines.  */
+#ifndef __GO32__
+
+#include <stdio.h>
+#include <string.h>
+
+/* Before sys/file.h for Unixware.  */
+#include <sys/types.h>
+
+#include <sys/file.h>
+
+/* This used to say sys/fcntl.h, but the only systems I know of that
+   require that are old (pre-4.3, at least) BSD systems, which we
+   probably don't need to worry about.  */
+#include <fcntl.h>
+
+#include <sys/wait.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <signal.h>
+#include <sys/errno.h>
+#include "udiproc.h"
+#include "udisoc.h"
+
+extern	int		errno;
+extern	int		sys_nerr;
+extern	int		udr_errno;
+extern	char*		getenv();
+
+/* local type decs. and macro defs. not in a .h  file ************* MACRO/TYPE
+*/
+#define		version_c 0x121		/* DFE-IPC version id */
+#define		TRUE -1
+#define		FALSE 0
+#define		PORT_NUM 7000
+#define		MAX_SESSIONS 5		/* maximum DFE-TIP connections */
+#define		SOC_BUF_SIZE 4* 1024	/* size of socket comms buffer */
+#define		SBUF_SIZE 500		/* size of string buffer */
+#define		ERRMSG_SIZE 500		/* size of error message buffer */
+
+typedef struct connection_str		/* record of connect session */
+{
+    int		in_use;
+    char	connect_id[20];		/* connection identifier */
+    char	domain_string[20];	/* dommaing for conection */
+    char	tip_string[30];		/* TIP host name for AF_INET */
+    char	tip_exe[80];		/* TIP exe name */
+    int		dfe_sd;			/* associated DFE socket */
+    int		tip_pid;		/* pid of TIP process */
+    struct sockaddr_in dfe_sockaddr;
+    struct sockaddr_in tip_sockaddr_in;
+    struct sockaddr    tip_sockaddr;
+} connection_t;
+
+typedef struct session_str
+{
+    int		  in_use;
+    connection_t* soc_con_p;		/* associated connection */
+    UDISessionId  tip_id;		/* associated TIP session ID */
+} session_t;
+
+/* global dec/defs. which are not in a .h   file ************* EXPORT DEC/DEFS
+*/
+UDIError	dfe_errno;
+char	dfe_errmsg[ERRMSG_SIZE];/* error string */
+
+/* local dec/defs. which are not in a .h   file *************** LOCAL DEC/DEFS
+*/
+LOCAL connection_t	soc_con[MAX_SESSIONS];	
+LOCAL session_t	session[MAX_SESSIONS];	
+LOCAL UDR	udr;
+LOCAL UDR*	udrs = &udr;		/* UDR for current session */
+LOCAL int	current;		/* int-id for current session */
+LOCAL char	sbuf[SBUF_SIZE];	/* String handler buffer */
+LOCAL char	config_file[80];	/* path/name for config file */
+
+/***************************************************************** UDI_CONNECT
+* Establish a new FDE to TIP conection. The file "./udi_soc" or
+* "/etc/udi_soc" may be examined to obtain the conection information
+* if the "Config" parameter is not a completd "line entry".
+*
+* NOTE: the Session string must not start whith white-space characters.
+* Format of string is:
+* <session>   <domain> <soc_name|host_name> <tip_exe|port> <pass to UDIconnect>
+* soc2cayman  AF_INET            cayman      7000           <not supported>
+* soc2tip     AF_UNIX   astring              tip.exe        ...
+*/
+UDIError
+UDIConnect(Config, Session)
+     char *Config;		/* in  -- identification string */
+     UDISessionId *Session;	/* out -- session ID */
+{
+    UDIInt32	service_id = UDIConnect_c;
+    int		domain;
+    int		cnt=0;
+    int		rcnt, pos, params_pos=0;
+    char	*tip_main_string;
+    char	*env_p;
+    struct hostent	*tip_info_p;
+    FILE	*fd;
+#if 0
+    FILE	*f_p;
+#endif
+    UDIUInt32	TIPIPCId;
+    UDIUInt32	DFEIPCId;
+
+#if 0 /* This is crap.  It assumes that udi_soc is executable! */
+    sprintf(sbuf, "which udi_soc");
+    f_p = popen(sbuf, "r");
+    if(f_p)
+    {   while( (sbuf[cnt++]=getc(f_p)) != EOF);
+	sbuf[cnt-2]=0;
+    }
+    pclose(f_p);
+#endif
+
+    for (rcnt=0;
+	 rcnt < MAX_SESSIONS && session[rcnt].in_use;
+	 rcnt++);
+
+    if (rcnt >= MAX_SESSIONS)
+      {
+	sprintf(dfe_errmsg, "DFE-ipc ERROR: Too many sessions already open");
+	return UDIErrorIPCLimitation;
+      }
+
+    /* One connection can be multiplexed between several sessions. */
+
+    for (cnt=0;
+	 cnt < MAX_SESSIONS && soc_con[cnt].in_use;
+	 cnt++);
+
+    if (cnt >= MAX_SESSIONS)
+      {
+        sprintf(dfe_errmsg,
+		"DFE-ipc ERROR: Too many connections already open");
+        return UDIErrorIPCLimitation;
+      }
+
+    *Session = rcnt;
+    session[rcnt].soc_con_p = &soc_con[cnt];
+
+    if (strchr(Config, ' '))		/* test if file entry given */
+      {
+        soc_con[cnt].in_use = TRUE;
+        sscanf(Config, "%s %s %s %s %n",
+	       soc_con[cnt].connect_id,
+	       soc_con[cnt].domain_string,
+	       soc_con[cnt].tip_string,
+	       soc_con[cnt].tip_exe,
+	       &params_pos);
+	tip_main_string = Config + params_pos;
+      }
+    else				/* here if need to read udi_soc file */
+      {
+	strcpy(config_file, "udi_soc");
+	env_p = getenv("UDICONF");
+	if (env_p)
+	  strcpy(config_file, env_p);
+
+	fd = fopen(config_file, "r");
+
+	if (!fd)
+	  {
+	    sprintf(dfe_errmsg, "UDIConnect, can't open udi_soc file:\n%s ",
+		    strerror(errno));
+	    dfe_errno = UDIErrorCantOpenConfigFile;
+	    goto tip_failure;
+	  }
+
+	while (1)
+	  {
+	    if (fscanf(fd, "%s %s %s %s %[^\n]\n",
+		       soc_con[cnt].connect_id,
+		       soc_con[cnt].domain_string,
+		       soc_con[cnt].tip_string,
+		       soc_con[cnt].tip_exe,
+		       sbuf) == EOF)
+	      break;
+
+	    if (strcmp(Config, soc_con[cnt].connect_id) != 0)
+	      continue;
+
+	    soc_con[cnt].in_use = TRUE; /* here if entry found */
+
+	    tip_main_string = sbuf;
+	    break;
+	  }
+
+	fclose(fd);
+	if (!soc_con[cnt].in_use)
+	  {
+	    sprintf(dfe_errmsg,
+		    "UDIConnect, can't find `%s' entry in udi_soc file",
+		    Config);
+	    dfe_errno = UDIErrorNoSuchConfiguration;
+	    goto tip_failure;
+	  }
+      }
+/*----------------------------------------------------------- SELECT DOMAIN */
+    if (strcmp(soc_con[cnt].domain_string, "AF_UNIX") == 0)
+      domain = AF_UNIX;
+    else if (strcmp(soc_con[cnt].domain_string, "AF_INET") == 0)
+      domain = AF_INET;
+    else
+      {
+    	sprintf(dfe_errmsg, "DFE-ipc ERROR: socket address family not known");
+	dfe_errno = UDIErrorBadConfigFileEntry;
+	goto tip_failure;
+      }
+
+/*---------------------------------------------------- MULTIPLEXED SOCKET ? */
+/* If the requested session requires communication with
+   a TIP which already has a socket connection established,
+   then we do not create a new socket but multiplex the
+   existing one. A TIP is said to use the same socket if
+   socket-name/host-name and the domain are the same.
+ */
+    for (rcnt=0; rcnt < MAX_SESSIONS; rcnt++)
+      {
+	if (soc_con[rcnt].in_use
+	    && rcnt != cnt
+	    && strcmp(soc_con[cnt].domain_string,
+		      soc_con[rcnt].domain_string) == 0
+	    && strcmp(soc_con[cnt].tip_string,
+		      soc_con[rcnt].tip_string) == 0)
+	  {
+	    session[*Session].soc_con_p = &soc_con[rcnt];
+	    soc_con[cnt].in_use = FALSE;	/* don't need new connect */
+	    goto tip_connect; 
+	}
+      }
+/*------------------------------------------------------------------ SOCKET */
+    soc_con[cnt].dfe_sd = socket(domain, SOCK_STREAM, 0);
+    if (soc_con[cnt].dfe_sd == -1)
+      {
+    	sprintf(dfe_errmsg, "DFE-ipc ERROR, socket() call failed %s ",
+		strerror (errno));
+	dfe_errno = UDIErrorUnknownError;
+	goto tip_failure;
+      }
+
+/*--------------------------------------------------------- AF_UNIX CONNECT */
+    if (domain == AF_UNIX)
+      {
+	if (strcmp(soc_con[cnt].tip_string, "*") == 0)
+	  {
+	    for (pos = 0; pos < 20; pos++)
+	      {
+		int f;
+
+		sprintf(soc_con[cnt].tip_string,"/tmp/U%d", getpid() + pos);
+		f = open(soc_con[cnt].tip_string, O_CREAT);
+		if (f == -1)
+		  continue;
+
+		close(f);
+		unlink(soc_con[cnt].tip_string);
+		break;
+	      }
+
+	    if (pos >= 20)
+	      {
+		sprintf(dfe_errmsg,
+			"DFE-ipc ERROR, can't create random socket name");
+		dfe_errno = UDIErrorCantConnect;
+		goto tip_failure;
+	      }
+	  }
+
+        soc_con[cnt].tip_sockaddr.sa_family = domain;
+        memcpy(soc_con[cnt].tip_sockaddr.sa_data,
+	      soc_con[cnt].tip_string,
+	      sizeof(soc_con[cnt].tip_sockaddr.sa_data));
+    	if (connect(soc_con[cnt].dfe_sd,
+		    &soc_con[cnt].tip_sockaddr,
+		    sizeof(soc_con[cnt].tip_sockaddr)))
+	  { /* if connect() fails assume TIP not yet started */
+/*------------------------------------------------------------ AF_UNIX EXEC */
+	    int	pid;
+	    int statusp;
+	    char *arg0;
+
+	    arg0 = strrchr(soc_con[cnt].tip_exe,'/');
+
+	    if (arg0)
+	      arg0++;
+	    else
+	      arg0 = soc_con[cnt].tip_exe;
+    
+	    pid = vfork();
+
+	    if (pid == 0)	/* Child */
+	      {
+		execlp(soc_con[cnt].tip_exe,
+		       arg0,
+		       soc_con[cnt].domain_string,
+		       soc_con[cnt].tip_string,
+		       NULL);
+	        _exit(1);
+	      }
+
+            if (waitpid(pid, &statusp, WNOHANG))
+	      {
+	        sprintf(dfe_errmsg, "DFE-ipc ERROR: can't exec the TIP");
+	        dfe_errno = UDIErrorCantStartTIP;
+		goto tip_failure;
+	      }
+
+	    pos = 3;
+    	    for (pos = 3; pos > 0; pos--)
+	      {
+		if (!connect(soc_con[cnt].dfe_sd, 
+			     &soc_con[cnt].tip_sockaddr,
+			     sizeof(soc_con[cnt].tip_sockaddr)))
+		  break;
+		sleep(1);
+	      }
+
+	    if (pos == 0)
+	      {
+		sprintf(dfe_errmsg, "DFE-ipc ERROR, connect() call failed: %s",
+	    		strerror (errno));
+	        dfe_errno = UDIErrorCantConnect;
+		goto tip_failure;
+	      }
+	  }
+      }
+/*--------------------------------------------------------- AF_INET CONNECT */
+    else if (domain == AF_INET)
+      {
+	fprintf(stderr,
+		"DFE-ipc WARNING, need to have first started remote TIP");
+
+	soc_con[cnt].tip_sockaddr_in.sin_family = domain;
+	soc_con[cnt].tip_sockaddr_in.sin_addr.s_addr =
+	    inet_addr(soc_con[cnt].tip_string);
+	if (soc_con[cnt].tip_sockaddr_in.sin_addr.s_addr == -1)
+	  {
+	    tip_info_p = gethostbyname(soc_con[cnt].tip_string);
+	    if (tip_info_p == NULL)
+	      {
+		sprintf(dfe_errmsg,"DFE-ipc ERROR, No such host %s",
+			soc_con[cnt].tip_string);
+	    	dfe_errno = UDIErrorNoSuchConnection;
+		goto tip_failure;
+	      }
+	    memcpy((char *)&soc_con[cnt].tip_sockaddr_in.sin_addr,
+		  tip_info_p->h_addr,
+		  tip_info_p->h_length);
+	  }
+	soc_con[cnt].tip_sockaddr_in.sin_port
+	  = htons(atoi(soc_con[cnt].tip_exe));
+
+    	if (connect(soc_con[cnt].dfe_sd,
+		    (struct sockaddr *) &soc_con[cnt].tip_sockaddr_in,
+		    sizeof(soc_con[cnt].tip_sockaddr_in)))
+	  {
+    	    sprintf(dfe_errmsg, "DFE-ipc ERROR, connect() call failed %s ",
+		    strerror (errno));
+	    dfe_errno = UDIErrorCantConnect;
+	    goto tip_failure;
+	  }
+      }
+/*------------------------------------------------------------- TIP CONNECT */
+    if (cnt == 0) udr_create(udrs, soc_con[cnt].dfe_sd, SOC_BUF_SIZE);
+
+tip_connect:
+    current = cnt;
+    session[*Session].in_use = TRUE;	/* session id is now in use */
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+
+    DFEIPCId = (company_c << 16) + (product_c << 12) + version_c;
+    udr_UDIUInt32(udrs, &DFEIPCId);
+
+    udr_string(udrs, tip_main_string);
+
+    udr_sendnow(udrs);
+
+    udrs->udr_op = UDR_DECODE;		/* recv all "out" parameters */
+    udr_UDIUInt32(udrs, &TIPIPCId);
+    if ((TIPIPCId & 0xfff) < version_c)
+      sprintf(dfe_errmsg, "DFE-ipc: Obsolete TIP Specified");
+
+    udr_UDIInt32(udrs, &soc_con[cnt].tip_pid);
+
+    udr_UDISessionId(udrs, &session[*Session].tip_id);
+
+    udr_UDIError(udrs, &dfe_errno);
+    if (dfe_errno > 0) UDIKill(*Session, 0);
+
+    return dfe_errno;
+
+tip_failure:
+
+    soc_con[cnt].in_use = FALSE;
+    session[*Session].in_use = FALSE;
+/* XXX - Should also close dfe_sd, but not sure what to do if muxed */
+    return dfe_errno;
+}
+
+/************************************************************** UDI_Disconnect
+* UDIDisconnect() should be called before exiting the
+* DFE to ensure proper shut down of the TIP.
+*/
+UDIError UDIDisconnect(Session,  Terminate)
+UDISessionId	Session;
+UDIBool		Terminate;
+{
+    int	cnt;
+    UDIInt32	service_id = UDIDisconnect_c;
+    if(Session < 0 || Session > MAX_SESSIONS)
+    {
+	sprintf(dfe_errmsg," SessionId not valid (%d)", Session);
+	return UDIErrorNoSuchConfiguration;
+    }
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISessionId(udrs, &session[Session].tip_id);
+    udr_UDIBool(udrs, &Terminate);
+    udr_sendnow(udrs);
+
+    session[Session].in_use = FALSE;	/* session id is now free */
+    for (cnt=0; cnt < MAX_SESSIONS; cnt++)
+        if(session[cnt].in_use
+	&& session[cnt].soc_con_p == session[Session].soc_con_p
+		) break;
+    if(cnt >= MAX_SESSIONS)	/* test if socket not multiplexed */
+        if(shutdown(session[Session].soc_con_p->dfe_sd, 2))
+        {
+     	    sprintf(dfe_errmsg, "DFE-ipc WARNING: socket shutdown failed");
+	    return UDIErrorIPCInternal;
+        }
+	else
+	  session[Session].soc_con_p->in_use = 0;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************************** UDI_KILL
+* UDIKill() is used to send a signal to the TIP.
+* This is a private IPC call.
+*/
+UDIError UDIKill(Session,  Signal)
+UDISessionId	Session;
+UDIInt32	Signal;
+{
+    int	cnt;
+    UDIInt32	service_id = UDIKill_c;
+    if(Session < 0 || Session > MAX_SESSIONS)
+    {
+	sprintf(dfe_errmsg," SessionId not valid (%d)", Session);
+	return UDIErrorNoSuchConfiguration;
+    }
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISessionId(udrs, &session[Session].tip_id);
+    udr_UDIInt32(udrs, &Signal);
+    udr_sendnow(udrs);
+
+    session[Session].in_use = FALSE;	/* session id is now free */
+    for (cnt=0; cnt < MAX_SESSIONS; cnt++)
+        if(session[cnt].in_use
+	&& session[cnt].soc_con_p == session[Session].soc_con_p
+		) break;
+    if(cnt < MAX_SESSIONS)	/* test if socket not multiplexed */
+        if(shutdown(session[Session].soc_con_p->dfe_sd, 2))
+        {
+     	    sprintf(dfe_errmsg, "DFE-ipc WARNING: socket shutdown failed");
+	    return UDIErrorIPCInternal;
+        }
+	else
+	  session[Session].soc_con_p->in_use = 0;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************** UDI_Set_Current_Connection
+* If you are connected to multiple TIPs, you can change
+* TIPs using UDISetCurrentConnection().
+*/
+UDIError UDISetCurrentConnection(Session)
+UDISessionId	Session;
+{
+    UDIInt32	service_id = UDISetCurrentConnection_c;
+
+    if(Session < 0 || Session > MAX_SESSIONS)
+	return UDIErrorNoSuchConfiguration;
+    if(!session[Session].in_use) 		/* test if not in use yet */
+	return UDIErrorNoSuchConnection;
+
+    current = Session;
+    /* change socket or multiplex the same socket  */
+    udrs->sd = session[Session].soc_con_p->dfe_sd;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISessionId(udrs, &session[Session].tip_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************************ UDI_Capabilities
+* The DFE uses UDICapabilities() to both inform the TIP
+* of what services the DFE offers and to inquire of the
+* TIP what services the TIP offers.
+*/
+UDIError UDICapabilities(TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId,
+		TIPIPCId, TIPString)
+UDIUInt32	*TIPId;		/* out */
+UDIUInt32	*TargetId;	/* out */
+UDIUInt32	DFEId;		/* in */
+UDIUInt32	DFE;		/* in */
+UDIUInt32	*TIP;		/* out */
+UDIUInt32	*DFEIPCId;	/* out */
+UDIUInt32	*TIPIPCId;	/* out */
+char		*TIPString;	/* out */
+{
+    UDIInt32	service_id = UDICapabilities_c;
+    int		size;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIInt32(udrs, &DFEId);
+    udr_UDIInt32(udrs, &DFE);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" paramters */
+    udr_UDIInt32(udrs, TIPId);
+    udr_UDIInt32(udrs, TargetId);
+    udr_UDIInt32(udrs, TIP);
+    udr_UDIInt32(udrs, DFEIPCId);
+    *DFEIPCId = (company_c << 16) + (product_c << 12) + version_c;
+    udr_UDIInt32(udrs, TIPIPCId);
+    udr_string(udrs, sbuf);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    size = strlen(sbuf);
+    if(size +1 > 80) return -1;		/* test if sufficient space */
+    strcpy(TIPString, sbuf);
+    return dfe_errno;
+}
+
+/********************************************************** UDI_Enumerate_TIPs
+* Used by the DFE to enquire about available TIP
+* connections.
+*/
+UDIError UDIEnumerateTIPs(UDIETCallback)
+  int (*UDIETCallback)();		/* In -- function to callback */
+{
+    FILE	*fp;
+
+    fp = fopen(config_file, "r");
+    if(fp == NULL)
+	return UDIErrorCantOpenConfigFile;
+    while(fgets( sbuf, SBUF_SIZE, fp))
+	if(UDIETCallback( sbuf) == UDITerminateEnumeration)
+	    break;
+    fclose( fp);
+    return UDINoError;			/* return success */
+}
+
+/*********************************************************** UDI_GET_ERROR_MSG
+* Some errors are target specific. They are indicated
+* by a negative error return value. The DFE uses
+* UDIGetErrorMsg() to get the descriptive text for
+* the error message which can then  be  displayed  to
+* the user.
+*/
+UDIError UDIGetErrorMsg(error_code, msg_len, msg, CountDone)
+UDIError	error_code;		/* In */
+UDISizeT	msg_len;		/* In  -- allowed message space */
+char*		msg;			/* Out -- length of message*/
+UDISizeT	*CountDone;		/* Out -- number of characters */
+{
+    UDIInt32	service_id = UDIGetErrorMsg_c;
+    int		size;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIError(udrs, &error_code);
+    udr_UDISizeT(udrs, &msg_len);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_string(udrs, sbuf);
+    udr_UDISizeT(udrs, CountDone);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    size = strlen(sbuf);
+    if(size +1 > msg_len) return -1;	/* test if sufficient space */
+    strcpy(msg, sbuf);
+    return dfe_errno;
+}
+
+/******************************************************* UDI_GET_TARGET_CONFIG
+* UDIGetTargetConfig() gets information about the target.
+*/
+UDIError UDIGetTargetConfig(KnownMemory, NumberOfRanges, ChipVersions,
+		NumberOfChips)
+UDIMemoryRange	KnownMemory[];		/* Out */
+UDIInt		*NumberOfRanges;	/* In and Out */
+UDIUInt32	ChipVersions[];		/* Out */
+UDIInt		*NumberOfChips;		/* In and Out */
+{
+    UDIInt32	service_id = UDIGetTargetConfig_c;
+    int		cnt;
+    int		MaxOfRanges = *NumberOfRanges;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIInt(udrs, NumberOfRanges);
+    udr_UDIInt(udrs, NumberOfChips);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" paramters */
+    for(cnt=1; cnt <= MaxOfRanges; cnt++)
+    	udr_UDIMemoryRange(udrs, &KnownMemory[cnt-1]);
+    udr_UDIInt(udrs, NumberOfRanges);
+    udr_UDIInt(udrs, NumberOfChips);
+    for(cnt=1; cnt <= *NumberOfChips; cnt++)
+    	udr_UDIUInt32(udrs, &ChipVersions[cnt -1]);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/********************************************************** UDI_CREATE_PRCOESS
+* UDICreateProcess() tells the  target  OS  that  a
+* process is to be created and gets a PID back unless
+* there is some error.
+*/
+UDIError UDICreateProcess(pid)
+UDIPId	*pid;	/* out */
+{
+    UDIInt32	service_id = UDICreateProcess_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIPId(udrs, pid);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/***************************************************** UDI_Set_Current_Process
+* UDISetCurrentProcess  uses   a   pid   supplied   by
+* UDICreateProcess  and  sets it as the default for all
+* udi calls until a new one is set.  A user of  a
+*/
+UDIError UDISetCurrentProcess (pid)
+UDIPId	pid;			/* In */
+{
+    UDIInt32	service_id = UDISetCurrentProcess_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIPId(udrs, &pid);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/****************************************************** UDI_INITIALISE_PROCESS
+* UDIInitializeProcess() prepare process for
+* execution. (Reset processor if process os processor).
+*/
+UDIError UDIInitializeProcess( ProcessMemory, NumberOfRanges, EntryPoint,
+		StackSizes, NumberOfStacks, ArgString)
+UDIMemoryRange	ProcessMemory[];	/* In */
+UDIInt		NumberOfRanges;		/* In */
+UDIResource	EntryPoint;		/* In */
+CPUSizeT	*StackSizes;		/* In */
+UDIInt		NumberOfStacks;		/* In */
+char		*ArgString;		/* In */
+{
+    UDIInt32	service_id = UDIInitializeProcess_c;
+    int		cnt;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIInt(udrs, &NumberOfRanges);
+    for(cnt = 0; cnt < NumberOfRanges; cnt++)
+	udr_UDIMemoryRange(udrs, &ProcessMemory[cnt] );
+    udr_UDIResource(udrs, &EntryPoint);
+    udr_UDIInt(udrs, &NumberOfStacks);
+    for(cnt = 0; cnt < NumberOfStacks; cnt++)
+	udr_CPUSizeT(udrs, &StackSizes[cnt]);
+    udr_string(udrs, ArgString);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/********************************************************* UDI_DESTROY_PROCESS
+* UDIDestroyProcess() frees a process resource
+* previously created by UDICreateProcess().
+*/
+UDIError UDIDestroyProcess(pid)
+UDIPId   pid;	/* in */
+{
+    UDIInt32	service_id = UDIDestroyProcess_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIPId(udrs, &pid);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/****************************************************************** UDI_READ
+* UDIRead() reads a block of objects from  a  target
+* address space  to host space.
+*/
+
+UDIError UDIRead (from, to, count, size, count_done, host_endian)
+UDIResource	from;		/* in - source address on target */
+UDIHostMemPtr	to;		/* out - destination address on host */
+UDICount	count;		/* in -- count of objects to be transferred */
+UDISizeT	size;		/* in -- size of each object */
+UDICount	*count_done;	/* out - count actually transferred */
+UDIBool		host_endian;	/* in -- flag for endian information */
+{
+    UDIInt32	service_id = UDIRead_c;
+    int		byte_count;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIResource(udrs, &from);
+    udr_UDICount(udrs, &count);
+    udr_UDISizeT(udrs, &size);
+    udr_UDIBool(udrs, &host_endian);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" paramters */
+    udr_UDICount(udrs, count_done);
+    byte_count = (*count_done) * size;
+    if(*count_done > 0 && *count_done <= count)
+        udr_bytes(udrs, to, byte_count);
+    if(udr_errno) return udr_errno;
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/****************************************************************** UDI_WRITE
+* UDIWrite() writes a block  of  objects  from  host
+* space  to  a  target  address+space.
+*/
+UDIError UDIWrite( from, to, count, size, count_done, host_endian )
+UDIHostMemPtr	from;		/* in -- source address on host */
+UDIResource	to;		/* in -- destination address on target */
+UDICount	count;		/* in -- count of objects to be transferred */
+UDISizeT	size;		/* in -- size of each object */
+UDICount	*count_done;	/* out - count actually transferred */
+UDIBool		host_endian;	/* in -- flag for endian information */
+{
+    UDIInt32	service_id = UDIWrite_c;
+    int		byte_count = count * size;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIResource(udrs, &to);
+    udr_UDICount(udrs, &count);
+    udr_UDISizeT(udrs, &size);
+    udr_UDIBool(udrs, &host_endian);
+    udr_bytes(udrs, from, byte_count);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" paramters */
+    udr_UDICount(udrs, count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************************** UDI_COPY
+* UDICopy() copies a block of objects from one  target
+* get  address/space to another target address/space.
+*/
+UDIError UDICopy(from, to, count, size, count_done, direction )
+UDIResource	from;		/* in -- destination address on target */
+UDIResource	to;		/* in -- source address on target */
+UDICount	count;		/* in -- count of objects to be transferred */
+UDISizeT	size;		/* in -- size of each object */
+UDICount	*count_done;	/* out - count actually transferred */
+UDIBool		direction;	/* in -- high-to-low or reverse */
+{
+    UDIInt32	service_id = UDICopy_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIResource(udrs, &from);
+    udr_UDIResource(udrs, &to);
+    udr_UDICount(udrs, &count);
+    udr_UDISizeT(udrs, &size);
+    udr_UDIBool(udrs, &direction);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDICount(udrs, count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/***************************************************************** UDI_EXECUTE
+* UDIExecute() continues execution  of  the  default
+* process from the current PC.
+*/
+UDIError UDIExecute()
+{
+    UDIInt32	service_id = UDIExecute_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************************** UDI_STEP
+* UDIStep()  specifies  a  number  of  "instruction"
+* steps  to  make.
+*/
+UDIError UDIStep(steps, steptype, range)
+UDIUInt32	steps;		/* in -- number of steps */
+UDIStepType	steptype;       /* in -- type of stepping to be done */
+UDIRange	range;          /* in -- range if StepInRange is TRUE */
+{
+    UDIInt32	service_id = UDIStep_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIInt32(udrs, &steps);
+    udr_UDIStepType(udrs, &steptype);
+    udr_UDIRange(udrs, &range);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************************** UDI_STOP
+* UDIStop() stops the default process
+*/
+UDIVoid UDIStop()
+{
+    if (strcmp(session[current].soc_con_p->domain_string, "AF_UNIX") == 0)
+      kill(session[current].soc_con_p->tip_pid, SIGINT);
+    else
+      udr_signal(udrs);
+
+/* XXX - should clean up session[] and soc_con[] structs here as well... */
+
+    return;
+}
+
+/******************************************************************** UDI_WAIT
+* UDIWait() returns the state of the target  procesor.
+*/
+UDIError UDIWait(maxtime, pid, stop_reason)
+UDIInt32   maxtime;        /* in -- maximum time to wait for completion */
+UDIPId     *pid;           /* out -- pid of process which stopped if any */
+UDIUInt32  *stop_reason;   /* out -- PC where process stopped */
+{
+    UDIInt32	service_id = UDIWait_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIInt32(udrs, &maxtime);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIPId(udrs, pid);
+    udr_UDIUInt32(udrs, stop_reason);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/********************************************************** UDI_SET_BREAKPOINT
+* UDISetBreakpoint() sets a breakpoint  at  an  adress
+* and  uses  the  passcount  to state how many
+* times that instruction should  be  hit  before  the
+* break  occurs.
+*/
+UDIError UDISetBreakpoint (addr, passcount, type, break_id)
+UDIResource	addr;		/* in -- where breakpoint gets set */
+UDIInt32	passcount;	/* in -- passcount for breakpoint  */
+UDIBreakType	type;		/* in -- breakpoint type */
+UDIBreakId	*break_id;	/* out - assigned break id */
+{
+    UDIInt32	service_id = UDISetBreakpoint_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIResource(udrs, &addr);
+    udr_UDIInt32(udrs, &passcount);
+    udr_UDIBreakType(udrs, &type);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIBreakId(udrs, break_id);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************** UDI_QUERY_BREAKPOINT
+*/
+UDIError UDIQueryBreakpoint (break_id, addr, passcount, type, current_count)
+UDIBreakId	break_id;	/* in -- assigned break id */
+UDIResource	*addr;		/* out - where breakpoint was set */
+UDIInt32	*passcount;	/* out - trigger passcount for breakpoint  */
+UDIBreakType	*type;		/* out - breakpoint type */
+UDIInt32	*current_count;	/* out - current count for breakpoint  */
+{
+    UDIInt32	service_id = UDIQueryBreakpoint_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIBreakId(udrs, &break_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIResource(udrs, addr);
+    udr_UDIInt32(udrs, passcount);
+    udr_UDIBreakType(udrs, type);
+    udr_UDIInt32(udrs, current_count);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/******************************************************** UDI_CLEAR_BREAKPOINT
+* UDIClearBreakpoint() is used to  clear  a  breakpoint.
+*/
+UDIError UDIClearBreakpoint (break_id)
+UDIBreakId	break_id;	/* in -- assigned break id */
+{
+    UDIInt32	service_id = UDIClearBreakpoint_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIBreakId(udrs, &break_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************************** UDI_GET_STDOUT
+* UDIGetStdout()  is  called   when   a   call   to
+* UDIWait() indicates there is STD output data ready. 
+*/
+UDIError UDIGetStdout(buf, bufsize, count_done)
+UDIHostMemPtr	buf;		/* out -- buffer to be filled */
+UDISizeT	bufsize;	/* in  -- buffer size in bytes */
+UDISizeT	*count_done;	/* out -- number of bytes written to buf */
+{
+    UDIInt32	service_id = UDIGetStdout_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISizeT(udrs, &bufsize);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDISizeT(udrs, count_done);
+    udr_bytes(udrs, buf, *count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************************** UDI_GET_STDERR
+* UDIGetStderr()  is  called   when   a   call   to
+* UDIWait() indicates there is STDERR output data ready
+*/
+UDIError UDIGetStderr(buf, bufsize, count_done)
+UDIHostMemPtr	buf;		/* out -- buffer to be filled */
+UDISizeT	bufsize;	/* in  -- buffer size in bytes */
+UDISizeT	*count_done;	/* out -- number of bytes written to buf */
+{
+    UDIInt32	service_id = UDIGetStderr_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISizeT(udrs, &bufsize);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDISizeT(udrs, count_done);
+    udr_bytes(udrs, buf, *count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/*************************************************************** UDI_PUT_STDIN
+* UDIPutStdin() is called whenever the DFE wants to
+* deliver an input character to the TIP.
+*/
+UDIError UDIPutStdin (buf, count, count_done)
+UDIHostMemPtr	buf;		/* in -- buffer to be filled */
+UDISizeT	count;		/* in -- buffer size in bytes */
+UDISizeT	*count_done;	/* out - number of bytes written to buf */
+{
+    UDIInt32	service_id = UDIPutStdin_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISizeT(udrs, &count);
+    udr_bytes(udrs, buf, count);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDISizeT(udrs, count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************************** UDI_STDIN_MODE
+* UDIStdinMode() is used to change the mode that chazcters
+* are fetched from the user.
+*/
+UDIError	UDIStdinMode(mode)
+UDIMode		*mode;		/* out - */
+{
+    UDIInt32	service_id = UDIStdinMode_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIMode(udrs, mode);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/*************************************************************** UDI_PUT_TRANS
+* UDIPutTrans() is used to feed input to  the  passthru  mode.
+*/
+UDIError	UDIPutTrans (buf, count, count_done)
+UDIHostMemPtr	buf;		/* in -- buffer address containing input data */
+UDISizeT	count;		/* in -- number of bytes in buf */
+UDISizeT	*count_done;	/* out-- number of bytes transfered */
+{
+    UDIInt32	service_id = UDIPutTrans_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISizeT(udrs, &count);
+    udr_bytes(udrs, buf, count);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDISizeT(udrs, count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/*************************************************************** UDI_GET_TRANS
+* UDIGetTrans() is used to get output lines from the
+* passthru mode.
+*/
+UDIError	UDIGetTrans (buf, bufsize, count_done)
+UDIHostMemPtr	buf;		/* out -- buffer to be filled */
+UDISizeT	bufsize;	/* in  -- size of buf */
+UDISizeT	*count_done;	/* out -- number of bytes in buf */
+{
+    UDIInt32	service_id = UDIGetTrans_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDISizeT(udrs, &bufsize);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDISizeT(udrs, count_done);
+    udr_bytes(udrs, buf, *count_done);
+    udr_UDIError(udrs, &dfe_errno);	/* get any TIP error */
+    return dfe_errno;
+}
+
+/************************************************************** UDI_Trans_Mode
+* UDITransMode() is used to change the mode that the
+* transparent routines operate in.
+*/
+UDIError UDITransMode(mode)
+UDIMode		*mode;		/* out  -- selected mode */
+{
+    UDIInt32	service_id = UDITransMode_c;
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+    udr_UDIMode(udrs, mode);
+    udr_sendnow(udrs);
+    if(udr_errno) return udr_errno;
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    udr_UDIError(udrs, &dfe_errno);
+    return dfe_errno;
+}
+
+/******************************************************************** UDI_TEST
+*/
+UDIError UDITest( cnt, str_p, array)
+UDISizeT	cnt;
+UDIHostMemPtr	str_p;
+UDIInt32	array[];
+{
+    UDIInt32	service_id = UDITest_c;
+    UDIInt16	scnt = cnt;
+    UDISizeT	r_cnt;
+    char	buf[256];
+
+    udr_errno = 0;
+    udrs->udr_op = UDR_ENCODE;		/* send all "in" parameters */
+    udr_UDIInt32(udrs, &service_id);
+
+    printf("send	cnt=%d scnt=%d\n", cnt, scnt);
+    udr_UDISizeT(udrs, &cnt);
+    udr_UDIInt16(udrs, &scnt);
+    printf("	array[0]=0x%x array[1]=0x%x array[2]=0x%x array[3]=0x%x\n",
+    	array[0], array[1], array[2], array[3]);
+    udr_bytes(udrs, (char*)array, 4*sizeof(UDIInt32));
+    printf("	string=%s\n", str_p);
+    udr_string(udrs, str_p);
+    udr_sendnow(udrs);
+    if(udr_errno)
+    {	fprintf(stderr, " DFE-ipc Send ERROR\n");
+	return udr_errno;
+    }
+
+    udrs->udr_op = UDR_DECODE;		/* receive all "out" parameters */
+    printf("recv	");
+    udr_UDISizeT(udrs, &r_cnt);
+    udr_UDIInt16(udrs, &scnt);
+    printf("	rcnt=%d scnt=%d\n", r_cnt, scnt);
+    udr_bytes(udrs, (char*)array, 4*sizeof(UDIInt32));
+
+    printf("	array[0]=0x%x array[1]=0x%x array[2]=0x%x array[3]=0x%x\n",
+    	array[0], array[1], array[2], array[3]);
+    udr_string(udrs, str_p);
+    printf("	string=%s\n", str_p);
+
+    udr_UDIError(udrs, &dfe_errno);
+    return dfe_errno;
+}
+
+
+
+UDIUInt32 UDIGetDFEIPCId()
+{
+    return ((company_c << 16) + (product_c << 12) + version_c);
+}
+#endif /* __GO32__ */
diff --git a/gdb/29k-share/udi/udiphcfg.h b/gdb/29k-share/udi/udiphcfg.h
new file mode 100644
index 0000000..e9eff0a
--- /dev/null
+++ b/gdb/29k-share/udi/udiphcfg.h
@@ -0,0 +1,44 @@
+/* This file just picks the correct udiphxxx.h depending on the host.
+   The two hosts that are now defined are UNIX and MSDOS.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * For the moment, we will default to BSD_IPC; this might change if/when
+ * another type of IPC (Mach? SysV?) is implemented.
+ */
+
+#if 0
+
+/* We don't seem to have a copy of udiphdos.h.  Furthermore, all the
+   things in udiphunix.h are pretty much generic 32-bit machine defines
+   which don't have anything to do with IPC.  */
+
+#ifdef DOS_IPC
+#include "udiphdos.h"
+#else
+/*#ifdef BSD_IPC */
+#include "udiphunix.h"
+#endif
+
+#else
+
+#include "udiphunix.h"
+
+#endif
diff --git a/gdb/29k-share/udi/udiphunix.h b/gdb/29k-share/udi/udiphunix.h
new file mode 100644
index 0000000..172fbbf
--- /dev/null
+++ b/gdb/29k-share/udi/udiphunix.h
@@ -0,0 +1,81 @@
+/* Originally called "udiphsun.h", however it was not very
+   Sun-specific; now it is used for generic-unix-with-bsd-ipc.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file is to be used to reconfigure the UDI Procedural interface
+   for a given host. This file should be placed so that it will be
+   included from udiproc.h. Everything in here may need to be changed
+   when you change either the host CPU or its compiler. Nothing in
+   here should change to support different targets. There are multiple
+   versions of this file, one for each of the different host/compiler
+   combinations in use.
+*/
+
+#define UDIStruct  struct		/* _packed not needed on unix */
+/* First, we need some types */
+/* Types with at least the specified number of bits */
+typedef double		UDIReal64;		/* 64-bit real value */
+typedef float		UDIReal32;		/* 32-bit real value */
+  
+typedef unsigned long	UDIUInt32;		/* unsigned integers */
+typedef unsigned short	UDIUInt16; 
+typedef unsigned char	UDIUInt8;
+  
+typedef long		UDIInt32;		/* 32-bit integer */ 
+typedef short		UDIInt16;		/* 16-bit integer */ 
+typedef char		UDIInt8;		/* unreliable signedness */
+
+/* To aid in supporting environments where the DFE and TIP use
+different compilers or hosts (like DOS 386 on one side, 286 on the
+other, or different Unix machines connected by sockets), we define
+two abstract types - UDIInt and UDISizeT.
+UDIInt should be defined to be int except for host/compiler combinations
+that are intended to talk to existing UDI components that have a different
+sized int. Similarly for UDISizeT.
+*/
+typedef int		UDIInt;
+typedef unsigned int	UDIUInt;
+
+typedef unsigned int	UDISizeT;
+
+/* Now two void types. The first is for function return types,
+the other for pointers to no particular type. Since these types
+are used solely for documentational clarity, if your host/compiler
+doesn't support either one, replace them with int and char *
+respectively.
+*/
+typedef void		UDIVoid;		/* void type */
+typedef void *		UDIVoidPtr;		/* void pointer type */
+typedef void *		UDIHostMemPtr;		/* Arbitrary memory pointer */
+
+/* Now we want a type optimized for boolean values. Normally this
+   would be int, but on some machines (Z80s, 8051s, etc) it might
+   be better to map it onto a char
+*/
+typedef	int		UDIBool;
+
+/* Now indicate whether your compiler support full ANSI style
+   prototypes. If so, use #if 1. If not use #if 0.
+*/
+#if 0
+#define UDIParams(x)	x
+#else
+#define UDIParams(x)	()
+#endif
diff --git a/gdb/29k-share/udi/udiproc.h b/gdb/29k-share/udi/udiproc.h
new file mode 100644
index 0000000..0cc1c20
--- /dev/null
+++ b/gdb/29k-share/udi/udiproc.h
@@ -0,0 +1,308 @@
+/* local type decs. and macro defs.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "udiphcfg.h"	/* Get host specific configuration */
+#include "udiptcfg.h"	/* Get target specific configuration */
+
+/* Here are all of the CPU Families for which UDI is currently defined */
+#define Am29K		1	/* AMD's Am290xx and Am292xx parts */
+
+typedef UDIInt		UDIError;
+typedef UDIInt		UDISessionId;
+typedef	UDIInt		UDIPId;
+typedef	UDIInt		UDIStepType;
+typedef	UDIInt		UDIBreakType;
+typedef	UDIUInt		UDIBreakId;
+typedef UDIUInt		UDIMode;
+
+typedef UDIStruct
+{			
+    CPUSpace	Space;
+    CPUOffset	Offset;
+} UDIResource;
+
+typedef	UDIStruct
+{
+    CPUOffset	Low;
+    CPUOffset	High;
+} UDIRange;
+
+typedef UDIStruct
+{
+    CPUSpace	Space;
+    CPUOffset	Offset;
+    CPUSizeT	Size;
+    } UDIMemoryRange;
+
+/* Values for UDIStepType parameters */
+#define UDIStepNatural		0x0000
+#define UDIStepOverTraps	0x0001
+#define UDIStepOverCalls	0x0002
+#define UDIStepInRange		0x0004
+#define UDIStepNatural		0x0000
+
+/* Values for UDIBreakType parameters */
+#define UDIBreakFlagExecute	0x0001
+#define UDIBreakFlagRead	0x0002
+#define UDIBreakFlagWrite	0x0004
+#define UDIBreakFlagFetch	0x0008
+
+/* Special values for UDIWait MaxTime parameter */
+#define UDIWaitForever	(UDIInt32) -1	/* Infinite time delay */
+
+/* Special values for PId */
+#define UDIProcessProcessor	-1	/* Raw Hardware, if possible */
+
+/* Values for UDIWait StopReason */
+#define UDIGrossState		0xff
+#define UDITrapped		0	/* Fine state - which trap */
+#define UDINotExecuting		1
+#define UDIRunning		2
+#define UDIStopped		3
+#define UDIWarned		4
+#define UDIStepped		5
+#define UDIWaiting		6
+#define UDIHalted		7
+#define UDIStdoutReady		8	/* fine state - size */
+#define UDIStderrReady		9	/* fine state - size */
+#define UDIStdinNeeded		10	/* fine state - size */
+#define UDIStdinModeX  		11	/* fine state - mode */
+#define UDIBreak		12	/* Fine state - Breakpoint Id */
+#define UDIExited		13	/* Fine state - exit code */
+
+/* Enumerate the return values from the callback function
+   for UDIEnumerateTIPs.
+*/
+#define UDITerminateEnumeration	0
+#define UDIContinueEnumeration	1
+
+/* Enumerate values for Terminate parameter to UDIDisconnect */
+#define UDITerminateSession	1
+#define UDIContinueSession	0
+
+/* Error codes */
+#define UDINoError			0	/* No error occured */
+#define UDIErrorNoSuchConfiguration	1
+#define UDIErrorCantHappen		2
+#define UDIErrorCantConnect		3
+#define UDIErrorNoSuchConnection	4
+#define UDIErrorNoConnection		5
+#define UDIErrorCantOpenConfigFile	6
+#define UDIErrorCantStartTIP		7
+#define UDIErrorConnectionUnavailable	8
+#define UDIErrorTryAnotherTIP		9
+#define UDIErrorExecutableNotTIP	10
+#define UDIErrorInvalidTIPOption	11
+#define UDIErrorCantDisconnect		12
+#define UDIErrorUnknownError		13
+#define UDIErrorCantCreateProcess	14
+#define UDIErrorNoSuchProcess		15
+#define UDIErrorUnknownResourceSpace	16
+#define UDIErrorInvalidResource		17
+#define UDIErrorUnsupportedStepType	18
+#define UDIErrorCantSetBreakpoint	19
+#define UDIErrorTooManyBreakpoints	20
+#define UDIErrorInvalidBreakId		21
+#define UDIErrorNoMoreBreakIds		22
+#define UDIErrorUnsupportedService	23
+#define UDIErrorTryAgain		24
+#define UDIErrorIPCLimitation		25
+#define UDIErrorIncomplete		26
+#define UDIErrorAborted			27
+#define UDIErrorTransDone		28
+#define UDIErrorCantAccept		29
+#define UDIErrorTransInputNeeded	30
+#define UDIErrorTransModeX		31
+#define UDIErrorInvalidSize		32
+#define UDIErrorBadConfigFileEntry	33
+#define UDIErrorIPCInternal		34
+/* TBD */
+
+/****************************************************************** PROCEDURES
+*/
+
+UDIError UDIConnect UDIParams((
+  char		*Configuration,		/* In */
+  UDISessionId	*Session		/* Out */
+  ));
+
+UDIError UDIDisconnect UDIParams((
+  UDISessionId	Session,		/* In */
+  UDIBool	Terminate		/* In */
+  ));
+
+UDIError UDISetCurrentConnection UDIParams((
+  UDISessionId	Session			/* In */
+  ));
+
+UDIError UDICapabilities UDIParams((
+  UDIUInt32	*TIPId,			/* Out */
+  UDIUInt32	*TargetId,		/* Out */
+  UDIUInt32	DFEId,			/* In */
+  UDIUInt32	DFE,			/* In */
+  UDIUInt32	*TIP,			/* Out */
+  UDIUInt32	*DFEIPCId,		/* Out */
+  UDIUInt32	*TIPIPCId,		/* Out */
+  char		*TIPString		/* Out */
+  ));
+
+UDIError UDIEnumerateTIPs UDIParams((
+  UDIInt	(*UDIETCallback)	/* In */
+    UDIParams(( char *Configuration ))	/* In to callback() */
+  ));
+
+UDIError UDIGetErrorMsg UDIParams((
+  UDIError	ErrorCode,		/* In */
+  UDISizeT	MsgSize,		/* In */
+  char		*Msg,			/* Out */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDIGetTargetConfig UDIParams((
+  UDIMemoryRange KnownMemory[],		/* Out */
+  UDIInt	*NumberOfRanges,	/* In/Out */
+  UDIUInt32	ChipVersions[],		/* Out */
+  UDIInt	*NumberOfChips		/* In/Out */
+  ));
+
+UDIError UDICreateProcess UDIParams((
+  UDIPId	*PId			/* Out */
+  ));
+
+UDIError UDISetCurrentProcess UDIParams((
+  UDIPId	PId			/* In */
+  ));
+
+UDIError UDIDestroyProcess UDIParams((
+  UDIPId	PId			/* In */
+  ));
+
+UDIError UDIInitializeProcess UDIParams((
+  UDIMemoryRange ProcessMemory[],	/* In */
+  UDIInt	NumberOfRanges,		/* In */
+  UDIResource	EntryPoint,		/* In */
+  CPUSizeT	StackSizes[],		/* In */
+  UDIInt	NumberOfStacks,		/* In */
+  char		*ArgString		/* In */
+  ));
+
+UDIError UDIRead UDIParams((
+  UDIResource	From,			/* In */
+  UDIHostMemPtr	To,			/* Out */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	HostEndian		/* In */
+  ));
+
+UDIError UDIWrite UDIParams((
+  UDIHostMemPtr	From,			/* In */
+  UDIResource	To,			/* In */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	HostEndian		/* In */
+  ));
+
+UDIError UDICopy UDIParams((
+  UDIResource	From,			/* In */
+  UDIResource	To,			/* In */
+  UDICount	Count,			/* In */
+  UDISizeT	Size,			/* In */
+  UDICount	*CountDone,		/* Out */
+  UDIBool	Direction		/* In */
+  ));
+
+UDIError UDIExecute UDIParams((
+  void
+  ));
+
+UDIError UDIStep UDIParams((
+  UDIUInt32	Steps,			/* In */
+  UDIStepType   StepType,		/* In */
+  UDIRange      Range			/* In */
+  ));
+
+UDIVoid UDIStop UDIParams((
+  void
+  ));
+
+UDIError UDIWait UDIParams((
+  UDIInt32	MaxTime,		/* In */
+  UDIPId	*PId,			/* Out */
+  UDIUInt32	*StopReason		/* Out */
+  ));
+
+UDIError UDISetBreakpoint UDIParams((
+  UDIResource	Addr,			/* In */
+  UDIInt32	PassCount,		/* In */
+  UDIBreakType	Type,			/* In */
+  UDIBreakId	*BreakId		/* Out */
+  ));
+
+UDIError UDIQueryBreakpoint UDIParams((
+  UDIBreakId	BreakId,		/* In */
+  UDIResource	*Addr,			/* Out */
+  UDIInt32	*PassCount,		/* Out */
+  UDIBreakType	*Type,			/* Out */
+  UDIInt32	*CurrentCount		/* Out */
+  ));
+
+UDIError UDIClearBreakpoint UDIParams((
+  UDIBreakId	BreakId			/* In */
+  ));
+
+UDIError UDIGetStdout UDIParams((
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDIGetStderr UDIParams((
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDIPutStdin UDIParams((
+  UDIHostMemPtr	Buf,			/* In */
+  UDISizeT	Count,			/* In */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDIStdinMode UDIParams((
+  UDIMode	*Mode			/* Out */
+  ));
+
+UDIError UDIPutTrans UDIParams((
+  UDIHostMemPtr	Buf,			/* In */
+  UDISizeT	Count,			/* In */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDIGetTrans UDIParams((
+  UDIHostMemPtr	Buf,			/* Out */
+  UDISizeT	BufSize,		/* In */
+  UDISizeT	*CountDone		/* Out */
+  ));
+
+UDIError UDITransMode UDIParams((
+  UDIMode	*Mode			/* Out */
+  ));
diff --git a/gdb/29k-share/udi/udipt29k.h b/gdb/29k-share/udi/udipt29k.h
new file mode 100644
index 0000000..5de2f3f
--- /dev/null
+++ b/gdb/29k-share/udi/udipt29k.h
@@ -0,0 +1,87 @@
+/* This file is to be used to reconfigure the UDI Procedural interface
+   for a given target.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file should be placed so that it will be
+   included from udiproc.h. Everything in here will probably need to
+   be changed when you change the target processor. Nothing in here
+   should need to change when you change hosts or compilers.
+*/
+
+/* Select a target CPU Family */
+#define TargetCPUFamily 	Am29K
+
+/* Enumerate the processor specific values for Space in a resource */
+#define UDI29KDRAMSpace		0
+#define UDI29KIOSpace		1
+#define UDI29KCPSpace0		2
+#define UDI29KCPSpace1		3
+#define UDI29KIROMSpace		4
+#define UDI29KIRAMSpace		5
+#define UDI29KLocalRegs		8
+#define UDI29KGlobalRegs	9
+#define UDI29KRealRegs		10
+#define UDI29KSpecialRegs	11
+#define UDI29KTLBRegs		12	/* Not Am29005 */
+#define UDI29KACCRegs		13	/* Am29050 only */
+#define UDI29KICacheSpace	14	/* Am2903x only */
+#define UDI29KAm29027Regs	15	/* When available */
+#define UDI29KPC		16
+#define UDI29KDCacheSpace	17	/* When available */
+
+/* Enumerate the Co-processor registers */
+#define UDI29KCP_F		0
+#define UDI29KCP_Flag		8
+#define UDI29KCP_I		12
+#define UDI29KCP_ITmp		16
+#define UDI29KCP_R		20
+#define UDI29KCP_S		28
+#define UDI29KCP_RTmp		36
+#define UDI29KCP_STmp		44
+#define UDI29KCP_Stat		52
+#define UDI29KCP_Prec		56
+#define UDI29KCP_Reg0		60
+#define UDI29KCP_Reg1		68
+#define UDI29KCP_Reg2		76
+#define UDI29KCP_Reg3		84
+#define UDI29KCP_Reg4		92
+#define UDI29KCP_Reg5		100
+#define UDI29KCP_Reg6		108
+#define UDI29KCP_Reg7		116
+#define UDI29KCP_Mode		124
+
+/* Enumerate the stacks in StackSizes array */
+#define UDI29KMemoryStack	0
+#define UDI29KRegisterStack	1
+
+/* Enumerate the chips for ChipVersions array */
+#define UDI29K29KVersion	0
+#define UDI29K29027Version	1
+
+/* Define special value for elements of ChipVersions array for
+ * chips not present */
+#define UDI29KChipNotPresent	-1
+
+typedef	UDIInt32		UDICount;
+typedef	UDIUInt32		UDISize;
+
+typedef UDIInt			CPUSpace;
+typedef UDIUInt32		CPUOffset;
+typedef	UDIUInt32		CPUSizeT;
diff --git a/gdb/29k-share/udi/udiptcfg.h b/gdb/29k-share/udi/udiptcfg.h
new file mode 100644
index 0000000..1641a53
--- /dev/null
+++ b/gdb/29k-share/udi/udiptcfg.h
@@ -0,0 +1,19 @@
+/* Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "udipt29k.h"
diff --git a/gdb/29k-share/udi/udisoc.h b/gdb/29k-share/udi/udisoc.h
new file mode 100644
index 0000000..bc68b39
--- /dev/null
+++ b/gdb/29k-share/udi/udisoc.h
@@ -0,0 +1,184 @@
+/* This module defines constants used in the UDI IPC modules.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+static char udisoc_h[]="@(#)udisoc.h	2.6  Daniel Mann";
+static char udisoc_h_AMD[]="@(#)udisoc.h	2.4, AMD";
+
+#define LOCAL static
+#define	company_c	1		/* AMD Company id */
+#define	product_c 	1		/* socket IPC id */
+
+/* Enumerate the UDI procedure services 
+*/
+#define	UDIConnect_c			0
+#define	UDIDisconnect_c			1
+#define	UDISetCurrentConnection_c	2
+#define	UDICapabilities_c		3
+#define	UDIEnumerateTIPs_c		4
+#define	UDIGetErrorMsg_c		5
+#define	UDIGetTargetConfig_c		6
+#define	UDICreateProcess_c		7
+#define	UDISetCurrentProcess_c		8
+#define	UDIDestroyProcess_c		9
+#define	UDIInitializeProcess_c		10
+#define	UDIRead_c			11
+#define	UDIWrite_c			12
+#define	UDICopy_c			13
+#define	UDIExecute_c			14
+#define	UDIStep_c			15
+#define	UDIStop_c			16
+#define	UDIWait_c			17
+#define	UDISetBreakpoint_c		18
+#define	UDIQueryBreakpoint_c		19
+#define	UDIClearBreakpoint_c		20
+#define	UDIGetStdout_c			21
+#define	UDIGetStderr_c			22
+#define	UDIPutStdin_c			23
+#define	UDIStdinMode_c			24
+#define	UDIPutTrans_c			25
+#define	UDIGetTrans_c			26
+#define	UDITransMode_c			27
+#define	UDITest_c			28
+#define	UDIKill_c			29
+
+#define	udr_UDIInt8(udrs, obj)  udr_work(udrs, obj, 1)
+#define	udr_UDIInt16(udrs, obj) udr_work(udrs, obj, 2)
+#define	udr_UDIInt32(udrs, obj) udr_work(udrs, obj, 4)
+#define	udr_UDIInt(udrs, obj)   udr_work(udrs, obj, 4)
+
+#define	udr_UDIUInt8(udrs, obj)  udr_work(udrs, obj, 1)
+#define	udr_UDIUInt16(udrs, obj) udr_work(udrs, obj, 2)
+#define	udr_UDIUInt32(udrs, obj) udr_work(udrs, obj, 4)
+#define	udr_UDIUInt(udrs, obj)   udr_work(udrs, obj, 4)
+
+#define	udr_UDIBool(udrs, obj)   udr_UDIInt32(udrs, obj)
+#define	udr_UDICount(udrs, obj)  udr_UDIInt32(udrs, obj)
+#define	udr_UDISize(udrs, obj)   udr_UDIUInt32(udrs, obj)
+#define	udr_CPUSpace(udrs, obj)  udr_UDIInt32(udrs, obj)
+#define	udr_CPUOffset(udrs, obj) udr_UDIUInt32(udrs, obj)
+#define	udr_CPUSizeT(udrs, obj)  udr_UDIUInt32(udrs, obj)
+#define	udr_UDIBreakId(udrs,obj) udr_UDIUInt(udrs, obj)
+#define	udr_UDISizeT(udrs, obj)  udr_UDIUInt(udrs, obj)
+#define	udr_UDIMode(udrs, obj)   udr_UDIUInt(udrs, obj)
+
+#define	udr_UDIHostMemPtr(udrs, obj) udr_UDIUInt32(udrs, obj)
+#define	udr_UDIVoidPtr(udrs, obj)   udr_UDIUInt32(udrs, obj)
+#define	udr_UDIPId(udrs, obj)       udr_UDIUInt(udrs, obj)
+#define	udr_UDISessionId(udrs, obj) udr_UDIInt32(udrs, obj)
+#define	udr_UDIError(udrs, obj)     udr_UDIInt32(udrs, obj)
+#define	udr_UDIStepType(udrs, obj)  udr_UDIInt32(udrs, obj)
+#define	udr_UDIBreakType(udrs, obj) udr_UDIInt32(udrs, obj)
+
+ 
+#define	UDR_ENCODE 1
+#define	UDR_DECODE 2
+
+typedef struct	UDR_str
+{
+    int		udr_op;			/* UDR operation */
+    int		previous_op;
+    int		sd;
+    int		bufsize;
+    char*	buff;
+    char*	getbytes;
+    char*	putbytes;
+    char*	putend;
+    int		domain;
+    char*	soc_name;
+} UDR;
+
+/******************************************* Declare UDR suport functions */
+int udr_create UDIParams((
+  UDR*	udrs,
+  int	sd,
+  int	size
+  ));
+
+int udr_free UDIParams((
+  UDR*	udrs,
+  ));
+
+int udr_signal UDIParams((
+  UDR*	udrs,
+  ));
+
+int udr_sendnow UDIParams((
+  UDR*	udrs
+  ));
+
+int udr_work UDIParams((
+  UDR*	udrs,
+  void*	object_p,
+  int	size
+  ));
+
+int udr_UDIResource UDIParams((
+  UDR*	udrs,
+  UDIResource*	object_p
+  ));
+
+int udr_UDIRange UDIParams((
+  UDR*	udrs,
+  UDIRange*	object_p
+  ));
+
+int udr_UDIMemoryRange UDIParams((
+  UDR*	udrs,
+  UDIMemoryRange*	object_p
+  ));
+
+int udr_UDIMemoryRange UDIParams((
+  UDR*	udrs,
+  UDIMemoryRange* object_p
+  ));
+
+int udr_int UDIParams((
+  UDR*	udrs,
+  int*	int_p
+  ));
+
+int udr_bytes UDIParams((
+  UDR*	udrs,
+  char*	ptr,
+  int	len
+  ));
+
+char* udr_inline UDIParams((
+  UDR*	udrs,
+  int	size
+  ));
+
+char*	udr_getpos UDIParams((
+  UDR*	udrs
+  ));
+int	udr_setpos UDIParams((
+  UDR*	udrs,
+  char*	pos
+  ));
+
+int	udr_readnow UDIParams((
+  UDR*	udrs,
+  int	size
+  ));
+
+int udr_align UDIParams((
+  UDR*	udrs,
+  int	size,
+  ));
diff --git a/gdb/29k-share/udi/udr.c b/gdb/29k-share/udi/udr.c
new file mode 100644
index 0000000..10a9f38
--- /dev/null
+++ b/gdb/29k-share/udi/udr.c
@@ -0,0 +1,427 @@
+/* This module supports sending and receiving data objects over a
+   socket conection.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+   
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+static char udr_c[]="@(#)udr.c	2.8  Daniel Mann";
+static char udr_c_AMD[]="@(#)udr.c	2.3, AMD";
+/* 
+*	All data is serialised into a character stream,
+*	and de-serialised back into the approproiate objects.
+********************************************************************** HISTORY
+*/
+/* This is all unneeded on DOS machines.  */
+#ifndef __GO32__
+
+#include <stdio.h>
+#include <sys/types.h>
+
+/* This used to say sys/fcntl.h, but the only systems I know of that
+   require that are old (pre-4.3, at least) BSD systems, which we
+   probably don't need to worry about.  */
+#include <fcntl.h>
+
+#include <sys/socket.h>
+#include "udiproc.h"
+#include "udisoc.h"
+
+extern	int	errno;
+extern	char*	malloc();
+
+/* local type decs. and macro defs. not in a .h  file ************* MACRO/TYPE
+*/
+
+/* global dec/defs. which are not in a .h   file ************* EXPORT DEC/DEFS
+*/
+int		udr_errno;		/* error occurs during UDR service */
+
+/* local dec/defs. which are not in a .h   file *************** LOCAL DEC/DEFS
+*/
+
+/****************************************************************** UDR_CREATE
+* Build UDR structure for character stream processing.
+*/
+int udr_create(udrs, sd, size)
+UDR*	udrs;
+int	sd;
+int	size;
+{
+    udrs->sd = sd;
+    if(!udrs->buff) udrs->buff = malloc(size);
+    udrs->getbytes = udrs->buff;	/* set the buffer to the start */
+    udrs->putbytes = udrs->buff;
+    udrs->putend = udrs->buff;
+    udrs->udr_op = -1;			/* don't know the direction */
+    udrs->previous_op = -1;		/* don't know the direction */
+    udrs->bufsize = size;
+    return 0;
+}
+
+/******************************************************************** UDR_FREE
+* Free USR structure and close socket.
+*/
+int udr_free(udrs)
+UDR*	udrs;
+{
+    close(udrs->sd);
+    free(udrs->buff);
+    return 0;
+}
+
+/****************************************************************** UDR_SIGNAL
+* Send a signal to the process at the other end of the socket,
+* indicating that it should expect to recieve a new message shortly.
+*/
+int udr_signal(udrs)
+UDR*	udrs;
+{
+    if(send(udrs->sd, "I", 1, MSG_OOB) == -1)
+    {	perror("ERROR, udr_signal(), send(...MSG_OOB)");
+	udr_errno =  UDIErrorIPCInternal;
+    	return -1;		/* return error code */
+    }
+    return 0;
+}
+
+/***************************************************************** UDR_SENDNOW
+* used to flush the current character stream buffer to
+* the associated socket.  */
+int udr_sendnow(udrs)
+UDR*	udrs;
+{
+    int size = (UDIUInt32)(udrs->putend) - (UDIUInt32)(udrs->buff);
+    if(udrs->previous_op == 0)
+    {   udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+    udrs->putbytes = udrs->buff;
+    udrs->putend = udrs->buff;
+    if (write(udrs->sd, udrs->buff, size) == -1)
+    {	perror("ERROR, udr_sendnow(), write() call: ");
+	udr_errno =  UDIErrorIPCInternal;
+    	return -1;		/* return error code */
+    }
+    return 0;
+}
+
+/******************************************************************** UDR_WORK
+* Function to send or recieve data from the buffers supporting
+* socket communication. The buffer contains serialised objects
+* sent/recieved over a socket connection.
+*/
+int udr_work(udrs, object_p, size)
+UDR*	udrs;
+void*	object_p;
+int	size;
+{
+    int	    cnt, remain;
+
+    if(udrs->udr_op != udrs->previous_op)
+    {	if(udrs->previous_op == 0)
+	{   udr_errno =  UDIErrorIPCInternal;
+	    return -1;
+        }
+	udrs->previous_op= udrs->udr_op;
+	udrs->putbytes = udrs->buff;
+	udrs->getbytes = udrs->buff;
+    }
+
+    if(udrs->udr_op == UDR_ENCODE)
+    {			/* write data into character stream buffer */
+    	if( (UDIUInt32)(udrs->putbytes) + size >
+	    (UDIUInt32)(udrs->buff) + (UDIUInt32)(udrs->bufsize) )
+	{   udr_errno =  UDIErrorIPCInternal;
+	    return -1;
+        }
+	memcpy(udrs->putbytes, (char*)object_p, size);
+    	udrs->putbytes += size;
+    	if(udrs->putbytes > udrs->putend) udrs->putend = udrs->putbytes;
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+    	if( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->getbytes) < size )
+	{		 /* need more data in character stream buffer */
+       	    remain = (UDIUInt32)(udrs->bufsize) -
+		( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->buff) );
+       	    if( ((UDIUInt32)(udrs->bufsize) + (UDIUInt32)(udrs->buff)
+		- (UDIUInt32)(udrs->getbytes)) < size)
+	    {   udr_errno =  UDIErrorIPCInternal;
+	        return -1;
+            }
+    	    cnt = read(udrs->sd, (char*)udrs->putbytes, remain);
+	    if(cnt == -1) perror("ERROR udr_work(),  read() failure: ");
+	    udrs->putbytes += cnt;
+    	    if( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->getbytes) < size )
+	    {	udr_errno =  UDIErrorIPCInternal;
+	        return -1;		/* return error code */
+    	    }
+    	}		/* read data from character stream buffer */
+	memcpy((char*)object_p,  udrs->getbytes, size);
+    	udrs->getbytes += size;
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+    return 0;
+}
+
+/************************************************************* UDR_UDIResource
+*/
+int udr_UDIResource(udrs, object_p)
+UDR*	udrs;
+UDIResource*	object_p;
+{
+    int	retval;
+
+    retval = udr_CPUSpace(udrs, &object_p->Space);
+    retval = retval |  udr_CPUOffset(udrs, &object_p->Offset);
+    return retval;
+}
+
+/**************************************************************** UDR_UDIRange
+*/
+int udr_UDIRange(udrs, object_p)
+UDR*		udrs;
+UDIRange*	object_p;
+{
+    int	retval;
+
+    retval = udr_CPUOffset(udrs, &object_p->Low);
+    retval = retval | udr_CPUOffset(udrs, &object_p->High);
+    return retval;
+}
+
+/********************************************************** UDR_UDIMemoryRange
+*/
+int udr_UDIMemoryRange(udrs, object_p)
+UDR*		udrs;
+UDIMemoryRange*	object_p;
+{
+    int	retval;
+
+    retval = udr_CPUSpace(udrs, &object_p->Space);
+    retval = retval | udr_CPUOffset(udrs, &object_p->Offset);
+    retval = retval | udr_CPUSizeT(udrs, &object_p->Size);
+    return retval;
+}
+
+/****************************************************************** UDR_string
+*/
+int udr_string(udrs, sp)
+UDR*	udrs;
+char*	sp;
+{
+    int	len, retval;
+
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+	if(sp)
+    	{   len = strlen(sp) + 1;
+    	    retval = udr_UDIInt32(udrs, &len);
+    	    retval = retval | udr_work(udrs, sp, len);
+	}
+	else	/* deal with NULL pointer */
+	{   len = 0;
+    	    retval = udr_UDIInt32(udrs, &len);
+	}
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+    	retval = udr_UDIInt32(udrs, &len);
+	if(len)
+    	    retval = retval | udr_work(udrs, sp, len);
+	else	*sp = '\0';			/* terminate string */
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+    return retval;
+}
+
+/******************************************************************* UDR_BYTES
+*/
+int udr_bytes(udrs, ptr, len)
+UDR*	udrs;
+char*	ptr;
+int	len;
+{
+    return udr_work(udrs, ptr, len);
+}
+
+/********************************************************************* UDR_INT
+*/
+int udr_int(udrs, int_p)
+UDR*	udrs;
+int*	int_p;
+{
+    int ret_val;
+    UDIInt32  udr_obj;			/* object of know size */
+
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+        udr_obj = *int_p;		/* copy into know object size */
+        return udr_UDIInt32(udrs, &udr_obj);
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+        ret_val = udr_UDIInt32(udrs, &udr_obj);	/* get object of known size */
+	*int_p = udr_obj;
+	return ret_val;
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+}
+
+/****************************************************************** UDR_INLINE
+*/
+char* udr_inline(udrs, size)
+UDR*	udrs;
+int	size;
+{
+    if(udrs->udr_op != udrs->previous_op)
+    {	if(udrs->previous_op == 0)
+	{   udr_errno =  UDIErrorIPCInternal;
+	    return 0;
+        }
+    	udrs->previous_op= udrs->udr_op;
+	udrs->putbytes = udrs->buff;
+	udrs->getbytes = udrs->buff;
+    }
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+    	if(udrs->putbytes + size > udrs->bufsize + udrs->buff)
+	   return 0;
+    	udrs->putbytes += size;
+	return udrs->putbytes - size;
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+    	if(udrs->getbytes + size > udrs->bufsize + udrs->buff)
+	   return 0;
+    	udrs->getbytes += size;
+	return udrs->getbytes - size;
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return 0;
+    }
+}
+
+/****************************************************************** UDR_GETPOS
+*/
+char*	udr_getpos(udrs)
+UDR*	udrs;
+{
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+	return udrs->putbytes;
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+	return udrs->getbytes;
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return 0;
+    }
+}
+
+/****************************************************************** UDR_SETPOS
+*/
+int	udr_setpos(udrs, pos)
+UDR*	udrs;
+char*	pos;
+{
+    if( ((UDIUInt32)pos > (UDIUInt32)(udrs->buff) + (UDIUInt32)(udrs->bufsize))
+     || ((UDIUInt32)pos < (UDIUInt32)(udrs->buff) ) )
+    {	udr_errno =  UDIErrorIPCInternal;
+	return 0;
+    }
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+	udrs->putbytes = pos;
+	return 1;
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+	udrs->getbytes = pos;
+	return 1;
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return 0;
+    }
+}
+
+/***************************************************************** UDR_READNOW
+* Try and ensure "size" bytes are available in the
+* receive buffer character stream.
+*/
+int	udr_readnow(udrs, size)
+UDR*	udrs;
+int	size;
+{
+    int	cnt, remain;
+
+    if(udrs->udr_op == UDR_ENCODE)
+    {
+	udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+    else if(udrs->udr_op == UDR_DECODE)
+    {
+    	if( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->getbytes) < size )
+	{		 /* need more data in character stream buffer */
+       	    remain = (UDIUInt32)(udrs->bufsize) -
+		( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->buff) );
+    	    cnt = read(udrs->sd, (char*)udrs->putbytes, remain);
+	    if(cnt == -1) perror("ERROR udr_work(),  read() failure: ");
+	    udrs->putbytes += cnt;
+    	    if( (UDIUInt32)(udrs->putbytes)-(UDIUInt32)(udrs->getbytes) < size )
+    	    {  fprintf(stderr,"ERROR, udr_readnow() too few bytes in stream\n");
+	       return -1;		/* return error code */
+    	    }
+    	}		
+    }
+    else
+    {	udr_errno =  UDIErrorIPCInternal;
+	return -1;
+    }
+    return 0;
+}
+
+/******************************************************************* UDR_ALIGN
+*/
+int udr_align(udrs, size)
+UDR*	udrs;
+int	size;
+{
+    char*   align;
+    int	    offset;	
+
+    align = udr_getpos(udrs);
+    offset = size - ((int)align & (size -1));
+    offset = offset & (size -1);
+    if(offset) udr_setpos(udrs, align + offset);
+}
+#endif /* __GO32__ */
diff --git a/gdb/29k-share/udi_soc b/gdb/29k-share/udi_soc
new file mode 100644
index 0000000..343317f
--- /dev/null
+++ b/gdb/29k-share/udi_soc
@@ -0,0 +1,9 @@
+# @(#)udi_soc	2.1 Daniel Mann
+# NOTE: the Session string must not start whith white-space characters.
+# Format of string is:
+# <session>   <domain> <soc_name|host_name> <tip_exe> <pass to UDIconnect>
+soc2cayman  AF_INET            cayman      /bin/udi_tip   ...
+soc2tip     AF_UNIX   astring              tip.exe        ...
+cuba        AF_UNIX   soc_name    ../bin.68020/udi_tip    stuff to pass
+cayman      AF_INET   cayman      this_entry_not_matter   stuff to pass
+iss         AF_UNIX   *                  sun4/isstip	-r osboot
diff --git a/gdb/COPYING b/gdb/COPYING
new file mode 100644
index 0000000..60549be
--- /dev/null
+++ b/gdb/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) 19yy  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) 19yy name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
new file mode 100644
index 0000000..0ae5117
--- /dev/null
+++ b/gdb/ChangeLog
@@ -0,0 +1,1116 @@
+1999-04-07  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* GDB 4.18 released.
+
+1999-04-06  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* README: Change revision numbers in text to "4.18".
+	* Makefile.in (VERSION): Set to 4.18.
+
+1999-04-06  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* solib.c (clear_solib): Don't call disable_breakpoints_in_shlibs,
+	this breaks rerunning on sun4 native.
+
+1999-04-05  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Incorporate suggestions from David Taylor and Jason Molenda.
+	
+1999-04-02  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* README: Note that GDB requires an ANSI C compiler, and explain
+	how to get GCC.
+
+	* README: Update.
+	It says we provide HTML documentation, but we don't.
+	The instructions for building the .info files were wrong.
+	It didn't mention that texinfo.tex was provided with GDB.
+	It didn't mention the intl, texinfo, etc, or util directories.
+	(Perhaps util would be best left unmentioned.)
+	It didn't mention the --enable-build-warnings flag, or the --host
+	    flag.
+	It didn't mention remote-array.c or remote-d10v.c.
+	It had an old address for reporting bugs.  It's now gdb@gnu.org.
+	It mentioned xxgdb, which is obsolete, but didn't mention DDD.	
+
+	* config/sparc/nm-linux.h: Don't redefine PT_ATTACH to use the
+ 	deprecated PTRACE_SUNATTACH compatibility commands.  The
+ 	definitions from <sys/ptrace.h> are fine.
+
+1999-04-01  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Add more notes about user-visible changes.
+
+1999-04-01  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Fix for cross-debugging on an AIX host from Johanna Svenningsson:
+	* ax-gdb.h (enum axs_lvalue_kind): Remove trailing comma from enum.
+	* ax.h (enum agent_op, enum agent_flaws): Same.
+	* tracepoint.h (enum actionline_type): Same.
+	* config/xm-aix4.h: Add declaration for termdef.
+
+1999-03-31  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* jv-lang.h (dynamics_objfile): Remove decl, conflicts with static
+	decl in jv-lang.c.
+
+1999-03-31  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Mon Mar 29 14:40:44 1999  David Taylor  <taylor@ryobi.cygnus.com>
+
+	* valops.c (search_struct_field): revert HP merge change
+	to this function -- it causes messages to be printed about
+	member class ambiguity when the compiler is happy.
+	(search_struct_field_aux): delete -- added as part of HP merge
+	change; with aforementioned change it is no longer called.
+
+1999-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Merged change from Keith Seitz:
+	
+	1999-03-16  Keith Seitz  <keiths@cygnus.com>
+
+        * remote.c (reomte_binary_checked): New file global.
+        (check_binary_download): New function to check if
+        stub supports binary downloading that works with
+        stubs that are not eight bit clean.
+        (remote_write_bytes): Check for binary download capability
+        and use it if available.
+        Remove references to global remote_binary_length. What a hack.
+        (putpkt_binary): New function.
+	(putpkt): Call putpkt_binary.
+	Use xor to escape trouble characters.
+	* m32r-stub.c (bin2mem): Follow escape char convention change.
+
+	Applied patch from Stu Grossman:
+
+	Mon Feb 22 12:32:19 1999  Per Bothner  <bothner@cygnus.com>
+
+	* jv-valprint.c (java_val_print):  Restore line that somehow got lost.
+
+1999-03-24  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile (VERSION): Bump to 4.17.87.
+
+	Attempt to sort out SCO-related configs.
+	* configure.host (i[3456]86-*-sysv4.2*): Use instead of
+	i[3456]86-*-sysv4.2MP and i[3456]86-*-sysv4.2uw2*.
+	(i[3456]86-*-sysv5*): Recognize.
+	* configure.tgt (i[3456]86-*-sco3.2v5*, i[3456]86-*-sco3.2v4*):
+ 	Recognize.
+
+Wed Mar 24 01:01:27 1999  Andrew Cagney  <cagney@sludge.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_software_single_step): Change SIGNAL to
+ 	unsigned int.
+
+	From Rodney Brown <rodneybrown@pmsc.com>:
+	* target.h (enum thread_control_capabilities), breakpoint.h (enum
+ 	bptype), breakpoint.c (enum insertion_state_t): Strict ISO-C
+ 	doesn't allow trailing comma in enum definition.
+	
+1999-03-23  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * hppa-tdep.c (pa_register_look_aside): Remove CPU_HPPA_RISC_20
+        check, test for presence of struct save_state_t and the ss_wide 
+        member directly.
+        * configure.in:  Remove CPU_HPPA_RISC_20 test.  Add tests for
+        HAVE_STRUCT_SAVE_STATE_T and HAVE_STRUCT_MEMBER_SS_WIDE.
+        * acconfig.h: Add HAVE_STRUCT_SAVE_STATE_T HAVE_STRUCT_MEMBER_SS_WIDE.
+        * configure, config.in: Regenerated.
+
+Tue Mar 23 17:22:57 1999  Philippe De Muyter  <phdm@macqel.be>
+
+	* remote.c, parse.c: Include ctype.h.
+
+Mon Mar 22 13:25:13 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* infttrace.c (proc_wait): rename to ptrace_wait.
+
+1999-03-17  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in (HAVE_MULTIPLE_PROC_FDS): Don't define for Solaris
+	hosts--gdb doesn't support this yet.
+	* configure: Regenerated.
+
+Tue Mar 16 01:11:33 1999  Andrew Cagney  <cagney@rhino.cygnus.com>
+
+	* target.h (struct target_ops), target.c (debug_to_query),
+ 	remote.c (pack_hex_byte, remote_query): Promote char parameters to
+ 	int.  Stops compile problems with pedantic ISO-C compilers.
+
+Tue Mar 16 15:29:04 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* jv-lang.c, jv-lang.h (java_primitive_type): Declare argument
+	as int instead of char.
+
+1999-03-15  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Merged changes for binary downloads from Michael Snyder:
+	
+	Fri Mar 12 13:11:48 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+        * remote.c (remote_write_bytes): fix 'X' packet protocol so that it
+        can't overwrite the end of its buffer with escaped characters.
+
+1999-03-12  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Merged changes for HP/UX 9 from Jason Molenda:
+
+	1999-03-08  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* infttrace.c (hppa_get_process_events): Removed. Function only 
+	usable on HPUX 10 and above.  It is not called by any other part
+	of GDB.
+	* hppah-nat.c (hppa_get_process_events): Ditto.
+	(child_pid_to_exec_file): Only call ptrace with PT_GET_PROCESS_PATHNAME
+	if that symbol has been defined.
+	* config/pa/nm-hppah.h: Don't set up prototypes et al for 
+	hppa_get_process_events.
+
+	* config/pa/hppahpux.mh (TERM_LIB): Do not initialize, let autoconf
+	determine best library automatically.
+	* config/pa/hpux1020.mh: Ditto.
+	* config/pa/hpux1100.mh: Ditto.
+	* configure.in (TERM_LIB): Also check for libHcurses.
+	* configure: Regenerated.
+
+	Merged changes to accomodate the Hurd:
+	
+        Thu Mar 11 18:05:11 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* infptrace.c (proc_wait): Rename to ptrace_wait.
+	* inftarg.c (child_wait): call ptrace_wait instead of proc_wait.
+	* inferior.h: Declare ptrace_wait instead of proc_wait.
+
+1999-03-11  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* Makefile.in (VERSION): click to 4.17.86, for next snapshot.
+
+1999-03-09  Rodney Brown  <RodneyBrown@pmsc.com>
+
+	Get working on UnixWare 2.1.1.
+	* acconfig.h: Update for defines for procfs.c.
+	* configure.in: Identify defines for procfs.c.
+	* configure.host: i386-*-sysv4.2uw2* => i386v42mp
+	* configure.tgt:  i386-*-sysv4.2uw2* => i386v42mp
+	* configure, config.in: Regenerate.
+	* procfs.c: Rename HAVE_NO_PRRUN_T to HAVE_PRRUN_T (autoconf
+ 	standard), wrap UNIXWARE difference in THE_PR_LWP macro for
+ 	legibility.
+	* config/i386/tm-i386v42mp.h: Remove HAVE_PSTATUS_T,
+ 	HAVE_NO_PRRUN_T; now set by configure.
+
+1999-03-04  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Merged changes from Jason Molenda:
+	
+	1999-02-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * configure.in: Set CPU_HPPA_RISC_20 if the host CPU is a PA 2.0 
+        processor.
+        * acconfig.h: Add CPU_HPPA_RISC_20
+        * config.in, configure: Regenerated.
+        * hppa-tdep.c (pa_register_look_aside): Only refer to new 
+        structure elements if we are on a PA2.0 system.
+        * defs.h: Include limits.h.
+
+	Merged changes from Stu Grossman:
+	
+	Wed Feb 17 10:10:27 1999  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* gdbtypes.h (get_discrete_bounds):  Remove duplicate decl.
+
+	* jv-typeprint.c (java_type_print_base):  Change fputs => fputs_filtered.
+	
+	Mon Jan 25 18:30:57 1999  Per Bothner  <bothner@cygnus.com>
+
+	* jv-lang.h (JAVA_OBJECT_SIZE):  Change from hard-wired constant.
+	(java_primitive_type_from_name, get_java_object_header_size):  Declare.
+	* jv-lang.c (java_class_from_object):  Use get_java_object_type.
+	* jv-lang.c:  Update Class field names:  dtable->vtable,
+	msize->method_count, nfields->field_count, bfsize->size_in_bytes,
+	nmethods->method_count.
+	(type_from_class):  Demangle array type names.
+	(java_link_class_type):  Array type names are now demangled.
+	(get_java_object_type):  If not defined yet, try looking it up.
+	(get_java_object_header_size):  New function.
+	(java_primitive_type_from_name):  New function.
+	(java_demangled_signature_length, java_demangled_signature_copy): New.
+	(java_demangle_type_signature):  Re-implement using above functions.
+	(evaluate_subexp_java):  For UNOP_IND, call evaluate_subexp_java
+	to evaluate subexp (not evaluate_subexp_standard).
+	For BINOP_SUBSCRIPT update for new array type naming scheme.
+	* jv-valprint.c (java_value_print):  Use java_class_from_object.
+	Update array printing to new array type naming convention.
+	(java_val_print):  Doing check_typedef when printing a pointer is
+	is a waste of effort.  Also, handle TYPE_CODE_INT, to make sure
+	Java bytes as not printed as C chars.
+
+	Fri Jan  8 16:58:22 1999  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* blockframe.c (find_pc_sect_partial_function):  Search full symtabs as
+	a last ditch effort (after the partial & minimal symtabs).
+	* defs.h utils.c:  Fixup prototypes for vprintf_filtered,
+	vfprintf_filtered, vfprintf_unfiltered and vprintf_unfiltered to return
+ 	ints to match their standard equivalents.
+	* defs.h symtab.c top.c:  Create skip_prologue_hook to allow Java to
+	control the prologue skipping process.
+	* jv-typeprint.c (java_type_print_base):  Remove extern for
+	jv_class_demangle, add new arg for objfile (NULL).
+	* symtab.h:  Remove struct sourcevector and struct source.  Definately
+	not needed.
+	* values.c (value_virtual_fn_field):  Fixes code to handle new vtable
+	debug info format.  Patch from marka.
+	
+	Wed Dec 16 23:11:25 1998  Stu Grossman  <grossman@fencer.cygnus.com>
+
+	* jv-lang.c (java_class_from_object java_class_is_primitive
+	is_object_type):  Change dtable to vtable.
+	* (java_primitive_type):  Change arg to type char.
+	* (_initialize_java_language):  Make java_char_type be unsigned.
+	* jv-lang.h:  Fixup prototypes.
+	
+	Mon Dec  7 19:02:15 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* jv-valprint.c (java_value_print):  Fix printing of values where
+	run time type != compile time type.
+
+	Fri Dec  4 15:23:38 1998  Stu Grossman  <grossman@fencer.cygnus.com>
+  
+	* Makefile.in:  Whack out m2-typeprint.c.
+	* c-typeprint.c (c_type_print_varspec_suffix) typeprint.h:  Make this
+	global.  It's needed by Java.
+	* (c_type_print_base):  Whack prefix off of qualified method names
+	(names with name spaces).
+	* gdbtypes.h (struct cplus_struct_type):  Add bits for Java attributes.
+  	Shrink voffset
+	to 16 bits to compensate for added bits above (hopefully this is still
+ 	enough).
+	* Add new accessor macros (TYPE_FND_FIELD_PUBLIC, ...) for all new
+	attribute bits.
+	* jv-typeprint.c (java_type_print_base):  Fix printing of method
+	attributes.  Handle JVM style manglings.
+	* (java_print_type):  Enable code type print varspec_suffix to allow
+	array indices to print out.
+	* jv-valprint.c (java_val_print):  Minor formatting.
+	* m2-lang.c (m2_language_d):  Change m2_print_type to c_print_type.
+	* stabsread.c (read_member_functions):  Save public and static attributes.
+
+1999-03-02  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Gary Thomas  <gthomas@cygnus.co.uk>:
+	* arm-tdep.c (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT,
+	THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Use illegal instruction
+	instead of SWI 24.
+	* config/arm/tm-arm.h (CALL_DUMMY): Ditto.
+	(IN_SIGTRAMP): Define.
+
+1999-03-01  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* configure.in (TERM_LIB): Move the code which sets this to a
+	better place.
+
+1999-02-25  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* breakpoint.c (SOLIB_LOADED_LIBRARY_PATHNAME,
+ 	SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_CREATE_CATCH_LOAD_HOOK,
+ 	SOLIB_CREATE_CATCH_UNLOAD_HOOK): Supply default definitions.
+	* infrun.c (SOLIB_IN_DYNAMIC_LINKER): Ditto.
+
+1999-02-23  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Patch from Jason Molenda  (jsm@bugshack.cygnus.com)
+        * configure.in (TERM_LIB): Move checking for TERM_LIB, substituting.
+        * configure, aclocal.m4, config.in: Regenerated.
+
+1999-02-22  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* Makefile.in (VERSION): Bump to 4.17.85, for the release process.
+
+	Patch from Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+	* breakpoint.c (watch_command_1): Reformat comment.
+
+	Patch from Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+	* c-typeprint.c (c_type_print_base): Reformat comments.
+
+	Patch from Edith Epstein  <eepstein@sophia.cygnus.com>:
+        * config/pa/nm-hppah.h: Added prototype declarations for
+        hppa_enable_page_protection_events and 
+        hppa_disable_page_protection_events.
+
+	Patch from Edith Epstein  <eepstein@sophia.cygnus.com>:
+        * infttrace.c (hppa_insert_hw_watchpoint): Make sure that
+        function always returns a value.
+        (hppa_remove_hw_watchpoint): Make sure that function always
+        returns a value.
+
+	Patch from Edith Epstein  <eepstein@sophia.cygnus.com>:
+        * inftarg.c (child_wait): Fixed code that checks whether
+        or not the target program has done a fork/vfork. 
+        related_pid  does not have a value unless the target 
+        program has forked/vforked.
+	
+1999-02-22  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* tm-h8500.h, i386lynx-nat.c: Removed.  These files are long
+	dead; it seems that they only appeared due to some CVS weirdness.
+	If they appear again, we may need to distribute garlic and holy
+	water.
+
+1999-02-16  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* Makefile.in (VERSION): Bump to 4.17.2.
+
+Sun Feb 14 18:21:08 1999  Mark Alexander  <marka@cygnus.com>
+
+	* config/sh/tm-sh.h (BELIEVE_PCC_PROMOTION): Define, so that
+	coffread.c will correctly handle char or short function parameters.
+
+1999-02-11  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure, aclocal.m4: Regenerate with correct version of aclocal.
+
+1999-02-10  Syd Polk  <spolk@cygnus.com>
+
+	* acinclude.m4: Fix for new location of itclConfig.sh and itkConfig.sh.
+	* aclocal.m4: Regnerate.
+	* configure: Regenerate.
+
+1999-02-10  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * demangle.c: Fix comments to mention "set demangle-style"
+        instead of "set demangle".
+        Run through indent to fix minor indenting problems.
+
+Wed Feb 10 17:53:09 1999  Bob Manson  <manson@charmed.cygnus.com>
+
+	* i386-tdep.c (gdb_print_insn_i386): Add missing returns.
+
+Wed Feb 10 13:17:21 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Declare Gould configuration obsolete:
+	* configure.host, configure.tgt: Comment out Gould configs.
+	* Makefile.in: Comment out Gould-related actions.
+	* gould-xdep.c, gould-tdep.c, config/gould/*: Comment out.
+	* NEWS: Mention obsolete status.
+
+1999-02-09  DJ Delorie  <dj@cygnus.com>
+
+	* sparcl-tdep.c: UDP download works in cygwin
+
+1999-02-08  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gnu-regex.c: Check ENABLE_NLS instead of HAVE_LIBINTL_H.
+	* configure.in: Don't check for libintl.h.
+	* configure, config.in: Regenerated.
+
+Mon Feb  8 18:10:50 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Mention new X packet and PowerPC variant support.
+
+1999-02-08  Nick Clifton  <nickc@cygnus.com>
+
+	* configure.host: Add support for StrongARM host.
+	* configure.tgt: Add support for StrongARM target.
+
+Mon Feb  8 12:05:05 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* dsrec.c (make_srec): Cast targ_addr to int in call to sprintf
+ 	otherwise on big endian machine with a bfd_vma of 64 bits,
+ 	*everything* gets loaded at location 0.
+
+Mon Feb  7 10:05:43 1999  Frank Ch. Eigler  <fche@cygnus.com>
+
+       * infrun.c (wait_for_inferior): Allow SIGTRAP to be "pass"ed
+       to target program.
+
+Fri Feb  5 16:46:14 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Add mentions of various new things.
+
+Thu Feb  4 00:19:14 1999  Christopher Faylor <cgf@cygnus.com>
+
+	* configure.in: Move termcap determination later in the
+	file to catch setting of cygwin flag.
+	* configure: Regenerate.
+
+Wed Feb  3 14:16:38 1999  Christopher Faylor <cgf@cygnus.com>
+
+	* config/i386/cygwin.mh: Move TERMCAP test code to configure.in.
+	* configure.in: Treat libtermcap.a detection as a special case
+	when hosting on cygwin.
+	* configure: Regenerate.
+
+1999-02-03  Keith Seitz  <keiths@cygnus.com>
+ 
+        * remote.c (remote_binary_download, remote_binary_length): New
+        static globals for dealing with binary transmissions.
+        (remote_write_bytes): Add support for binary downloads
+        by shadowing the "M" packet with a new "X" packet. This
+        defaults to ON; if the stub does not understand this, it
+        will fall back to using "M".
+        (putpkt): Add support for binary downloading.
+        * monitor.c (monitor_expect): The mon2000 monitor
+        on the MSA2000 will also emit random DC1/DC3 chars.
+        * m32r-stub.c: Change all char's to unsigned char's
+        to support binary downloading.
+        (handle_exception): Add support for binary downloading
+        via a new "X" packet.
+        (getpacket): Do NOT strip eighth bit of incoming chars.
+        Watch out for escaped characters in the incoming stream.
+        (putpacket): Do NOT strip eighth bit of incoming chars.
+        (bin2mem): New function to write binary data directly to
+        memory.
+        * m32r-rom.c: Add new "mon2000" target.
+
+Tue Feb  2 18:40:29 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* hp-psymtab-read.c (hpread_build_psymtabs): Coerce first arg
+	passed to make_cleanup to the correct type.
+	(hpread_quick_traverse): Change fifth arg to call to 
+	hpread_end_psymtab to be 0. 
+	Compare CURR_MODULE_END to 0 rather than NULL.
+	Get rid of ifdef'ed out code.
+	(scan_procs): Get rid of ifdef'ed out code.
+
+	* somread.c (som_symfile_read): Coerce first argument passed to
+	make_cleanup to the correct type.
+
+Tue Feb  2 17:36:29 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* hp-psymtab-read.c (do_pxdb): New function. Check whether the
+	file needs to be processed by pxdb (an HP debug info massaging
+	tool), if so call it.
+	(hpread_build_psymtabs): Initialize scan_start to 0 and
+	simplify flow of control.
+
+	* somread.c (som_symfile_read): Add call to do_pxdb (), 
+	in hp-psymtab-read.c.
+
+	* symfile.c (symbol_file_add): Remove ifdef'ed out HPUX specific
+	code.
+	(symfile_bfd_open): Remove HPUXHPPA ifdef'ed code. Code is now
+	in hp-psymtab-read.c.
+
+1999-02-02  Martin Hunt  <hunt@cygnus.com>
+
+	* printcmd.c (print_scalar_formatted): Use strcat to concat all
+	the output together before calling fprintf_filtered().
+
+1999-02-01  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Require autoconf 2.13.
+	(AM_EXEEXT): Replace with new AC_EXEEXT.
+	* acinclude.m4: Move itcl header macros from aclocal.m4 to here.
+	* aclocal.m4: Regenerated.
+	* configure: Regenerated.
+
+1999-02-01  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Allow PPC users to select which PPC/RS6000 variant they're
+ 	debugging at run-time.  At the moment, the only thing this affects
+ 	is the set of registers visible.
+	* config/rs6000/tm-rs6000.h (REGISTER_NAME): Define this as a call
+	to the function rs6000_register_name.
+	(rs6000_register_name): Include extern decl.
+	(NUM_REGS): Bump to 183.  What's the right way to do this?
+	(FIRST_UISA_SP_REGNUM, LAST_UISA_SP_REGNUM): Renamed from
+	FIRST_SP_REGNUM, LAST_SP_REGNUM.
+	(REGISTER_BYTES): Recompute this.
+	* rs6000-tdep.c: Renamed all uses of FIRST_SP_REGNUM and
+	LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
+	some concomitant formatting changes.
+	#include "gdbcmd.h", so we can define commands here.
+	(struct variant): New structure.
+	(COMMON_UISA_REG_NAMES, PPC_UISA_SPR_NAMES, PPC_SEGMENT_REG_NAMES,
+	PPC_32_OEA_SPR_NAMES, num_registers): New macros. 
+	(register_names_rs6000, register_names_uisa, register_names_403,
+ 	register_names_403GC, register_names_505, register_names_860,
+ 	register_names_601, register_names_602, register_names_603,
+ 	register_names_604, register_names_750, variants): New variables.
+	(rs6000_register_name, install_variant, find_variant_by_name,
+	install_variant_by_name, list_variants, show_current_variant,
+	set_processor, show_processor): New functions.
+	(_initialize_rs6000_tdep): Define new commands `set processor' and
+	`show processor', and call install_variant_by_name to set the
+	default variant.
+	* rs6000-nat.c: Renamed all uses of FIRST_SP_REGNUM and
+	LAST_SP_REGNUM to FIRST_UISA_SP_REGNUM and LAST_UISA_SP_REGNUM, with
+	some concomitant formatting changes.
+	* configure.in: Accept the `--with-cpu' flag, to specify a default
+	processor variant.
+	* acconfig.h: Provide a blurb for TARGET_CPU_DEFAULT, which is set
+	by configure's `--with-cpu' flag.
+	* config.in, configure: Regenerated.
+
+Sun Jan 31 15:24:24 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* buildsym.h, buildsym.c: Convert to ANSI-only.
+
+	* buildsym.h, buildsym.c: Reformat to standard.
+
+	* buildsym.c (merge_symbol_lists): Remove unused variable.
+	(_initialize_buildsym): Remove, does nothing.
+
+1999-01-31 J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* i386-stub.c, m32r-stub.c, m68k-stub.c, sh-stub.c, sparc-stub.c,
+ 	sparcl-stub, sparclet-stub.c: Change declaration of putDebugChar
+ 	to include explicit void return type as per documentation.  Fix up
+ 	occasions where stubs erroneously checked return type.
+
+Sun Jan 31 13:18:33 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From J.T. Conklin <jtc@redbacknetworks.com>:
+	* remote.c (remote_query): Fix tipo.
+
+Fri Jan 29 15:25:09 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.tgt (v850): Add wildcard to match.
+
+Fri Jan 29 16:44:01 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+	* inferior.h: Ran indent.
+
+	* fork-child.c: Ran indent.
+
+	* infrun.c : Ran indent.
+
+Fri Jan 29 12:57:34 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* infrun.c (_initialize_infrun): Do not stop or print anything
+	when a SIGWINCH is received.
+
+	* Makefile.in (m2-exp.tab.c): Use YACC not BISON.
+	(f-exp.tab.c): Ditto.
+	(jv-exp.tab.c): Ditto.
+	(c-exp.tab.c): Ditto.
+	(YACC): Define as @YACC@.
+
+1999-01-29  Martin Hunt  <hunt@cygnus.com>
+
+	Changes from Keith Seitz  <keiths@cygnus.com>
+        * valops.c (value_assign): Add calls to register_changed_hook and
+        memory_changed_hook to inform UIs that the user has changed
+        the target's registers/memory.
+        * findvar.c (write_register_gen): Remove call to pc_changed_hook.
+        * defs.h: Remove declaration for pc_changed_hook and
+        add declarations for register_changed_hook and
+        memory_changed_hook.
+        * top.c: Ditto.
+
+1999-01-29  Mark Alexander  <marka@cygnus.com>
+
+	* procfs.c (wait_fd): Handle deleted threads correctly.
+
+1999-01-28  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* utils.c (init_page_info): Force window size if running under emacs.
+
+1999-01-27  James Ingham  <jingham@cygnus.com>
+
+	* typeprint.c (whatis_exp): Remove static declaration.
+
+Wed Jan 27 16:50:25 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* hp-psymtab-read.c: Reformat using indent.
+
+Wed Jan 27 13:20:25 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* hp-psymtab-read.c: Reformat comments, update copyright.
+
+Tue Jan 26 16:02:47 1999  Mark Alexander  <marka@cygnus.com>
+
+	* v850-tdep.c (v850_generic_reg_names, v850e_reg_names,
+	v850_register_names, v850_processor_type_table): Declare tables
+	and structures for handling differences in register names for
+	v850 and v850e.
+	(struct reg_list): Define new structure for creating tables
+	of register bit masks in v850e instrutions.
+	(handle_prepare, handle_pushm): New helpers for v850_scan_prologue.
+	(v850_scan_prologue): Recognize v850e instructions: callt, prepare,
+	and pushm.
+	(v850_target_architecture_hook): New function to set register
+	names based on current machine.
+	(_initialize_v850_tdep): Set up target_architecture_hook.
+	* config/v850/tm-v850.h (v850_register_names): Declare.
+	(REGISTER_NAME): Define to refer to v850_register_names.
+	(SR0_REGNUM, CTBP_REGNUM): Define.
+	(PS_REGNUM): Redefine in terms of SR0_REGNUM.
+
+Tue Jan 26 18:27:26 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* Makefile.in (c-exp.tab.c): Use BISON instead of YACC, to pick
+	the correct value from configure output.
+	(jv-exp.tab.c): Ditto.
+	(f-exp.tab.c): Ditto.
+	(m2-exp.tab.c): Ditto.
+
+1999-01-26  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* breakpoint.h (ep_is_exception_catchpoint): Add prototype.
+	* frame.h (select_and_print_frame): Add prototype.
+	* stack.c (func_command): Call select_and_print_frame with correct
+	number of arguments.  Reformat whitespace.
+
+Tue Jan 26 16:53:54 1999  Fernando Nasser  <fnasser@cygnus.com>
+
+	* remote.c (remote_query): fix maximum packet size to account for
+	  remote_debug use.
+	  (putpkt): add comment to alert about extra byte need.
+
+Mon Jan 25 19:55:30 1999  Mark Alexander  <marka@cygnus.com>
+
+	* sh-tdep.c (sh_target_architecture_hook): Return immediately
+	when a matching machine is found.
+
+Fri Jan 22 09:10:35 1999  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c (mips_initialize): Fix parameters to clear_breakpoint.
+	(common_breakpoint): Restore support for instruction breakpoints
+	on non-LSI targets.
+
+Thu Jan 21 17:16:19 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* stack.c: Close open comment.
+	* symtab.c (find_pc_sect_line): Ditto.
+
+Thu Jan 21 17:51:51 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* procfs.c (init_procfs_ops): New function, fills in procfs_ops,
+	init only nonzero fields, leave to_require_attach and
+	to_require_detach empty, not needed for /proc systems yet.
+	(_initialize_procfs): Call init_procfs_ops.
+
+	From J.T. Conklin <jtc@redbacknetworks.com>:
+	* top.c (init_main): Fix tipo in description of the remotetimeout
+	variable.
+	* breakpoint.c (bpstat_stop_status): Handle systems where
+	DECR_PC_AFTER_BREAK != DECR_PC_AFTER_HW_BREAK.
+
+Thu Jan 21 17:25:46 1999  Mark Alexander  <marka@cygnus.com>
+
+	* mon960-rom.c (_initialize_mon960): Call init_mon960_cmds
+	to fill in mon960_cmds structure properly.
+
+Wed Jan 20 17:53:22 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-sds.c (sds_ops): Define only once.
+	(init_sds_ops, sds_command, _initialize_remote_sds): Declare.
+	(init_sds_ops): Init only non-zero fields.
+
+Wed Jan 20 15:45:15 1999  Mark Alexander  <marka@cygnus.com>
+
+	* h8300-tdep.c (original_register_names, h8300h_register_names,
+	h8300_register_names): Define new variables.
+	(set_register_names): New function to set register names based on
+	current CPU type.
+	(h8300_command, h8300h_command, h8300s_command): Call
+	set_register_names.
+	* config/h8300/tm-h8300.h (h8300_register_names): Declare.
+	(REGISTER_NAME): Define to refer to h8300_register_names.
+
+1999-01-19  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* sol-thread.c abug-rom.c cpu32bug-rom.c dbug-rom.c m32r-rom.c 
+	mac-nat.c mon960-rom.c op50-rom.c ppc-bdm.c remote-adapt.c 
+	remote-array.c remote-bug.c remote-e7000.c remote-eb.c remote-es.c 
+	remote-est.c remote-hms.c remote-mm.c remote-nindy.c remote-nrom.c 
+	remote-os9k.c remote-rdp.c remote-sds.c remote-sim.c remote-st.c 
+	remote-udi.c rom68k-rom.c sh3-rom.c sparcl-tdep.c sparclet-rom.c 
+	v850ice.c win32-nat.c: cosmetic changes to conform to coding
+	standards. 
+
+1999-01-19  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Use aclocal to generate GDB's aclocal.m4 script.  
+	* acinclude.m4: New file, containing the hand-written local macro
+ 	definitions that used to be in aclocal.m4.  Don't sinclude
+ 	../bfd/aclocal.m4 any more; running aclocal in this directory will
+ 	get us the definitions we need.  HOWEVER: Do sinclude
+ 	../bfd/acinclude.m4, because we need the definition of
+ 	BFD_NEED_DECLARATION.
+	* aclocal.m4: Regenerated by aclocal.
+	* configure: Regenerated by autoconf.
+
+Tue Jan 19 10:27:23 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* breakpoint.c (disable_breakpoints_in_shlibs): new parameter,
+	silent, controls whether to print message about removal of shared
+	library breakpoints.
+	* breakpoint.h (disable_breakpoints_in_shlibs): decl updated.
+	* irix5-nat.c (clear_solib): call disable_breakpoints_in_shlibs.
+	* osfsolib.c (clear_solib): ditto.
+	* solib.c (clear_solib): ditto.
+	* somsolib.c (som_solib_restart): update call to
+	disable_breakpoints_in_shlibs.
+
+	* target.h (child_post_attach): only declare if CHILD_POST_ATTACH
+	is define.
+
+Tue Jan 19 18:07:11 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* corelow.c (solib_add_stub): Ditto.
+	(core_file_to_sym_file): Cast make_cleanup parameter.
+
+	* solib.c (symbol_add_stub, solib_map_sections): Change argument
+ 	to PTR insted of a char*.  Matches catch_errors interface.
+
+Mon Jan 18 14:01:24 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-array.c (array_open): Don't use fprintf_filtered to send
+ 	data to the log file.
+
+	* remote-array.c (handle_load_dll): Change argument type to PTR so
+ 	that it is compatible with catch_errors.
+	* ocd.c (ocd_start_remote): Ditto.
+	* remote-sds.c (sds_start_remote): Ditto.
+
+	* win32-nat.c (win32_child_thread_alive): Namespace proof
+ 	child_thread_alive.
+	(init_child_ops): Update.
+
+Mon Jan 18 12:03:47 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-rdi.c (arm_rdi_open): Set gdb_hostif.hostosarg and
+ 	gdb_hostif.dbgarg to NULL instead of stdout.
+	(voiddummy, myprint, mywritec): Use gdb_stdout instead of stdout.
+
+Mon Jan 18 16:40:50 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* ser-ocd.c (ocd_open): Handle Unix case gracefully.
+
+	* target.c (dummy_target): Don't initialize statically.
+	(init_dummy_target): New function, fills in dummy_target.
+	(initialize_targets): Use it.
+	* hpux-thread.c (hpux_thread_ops): Don't initialize statically.
+	(init_hpux_thread_ops): New function, fills in hpux_thread_ops.
+	(_initialize_hpux_thread): Use it.
+	* m3-nat.c (m3_ops): Don't initialize statically.
+	(init_m3_ops): New function, fills in m3_ops.
+	(_initialize_m3): Use it.
+
+1999-01-18  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* sol-thread.c: delete compile time initialization of target_ops
+	  (_initialize_sol_thread): initialize target_ops at run time.
+	* hpux-thread.c: added target_ops entry.
+	* m3-nat.c: ditto.
+
+Mon Jan 18 15:19:13 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* procfs.c (procfs_ops): delete compile time initialization.
+	(_initialize_procfs): initialize procfs_ops at run time.
+
+Mon Jan 18 12:51:44 1999  Christopher Faylor <cgf@cygnus.com>
+
+	* configure.in: Ensure that -luser32 is always linked in
+	for cygwin build.
+	* configure: Regenerated.
+
+Mon Jan 18 08:38:05 1999  Mark Alexander  <marka@cygnus.com>
+
+	* values.c (value_virtual_fn_field): Clear the pointed-to
+	offset when casting to the base class.
+
+Mon Jan 18 10:30:51 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* remote-udi.c (init_udi_ops): change non-existant udi_run_ops to
+	udi_ops; delete NULL initializers.
+
+Mon Jan 18 12:03:47 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* serial.c (serial_close): gdb_fclose tages gdb_file** arg, not
+ 	gdb_file*.
+
+	* f-valprint.c, target.c, gdbarch.c: Pass gdb_stderr not stderr.
+
+Mon Jan 18 10:46:12 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* stack.c (print_frame_info_base): Don't cast call to
+ 	catch_errors.
+	(print_args_stub): Change char* arg to PTR.
+	* symmisc.c (print_symbol): Ditto.
+	* top.c (quit_cover): Ditto.
+	* remote.c (remote_open_1, remote_start_remote): Ditto.
+	* infrun.c (normal_stop, hook_stop_stub, restore_selected_frame):
+ 	Ditto.
+
+	* stack.c (backtrace_command): Cast first arg of make_cleanup to
+ 	make_cleanup_func.
+	* remote.c (remote_kill): Cast putpkt arg to catch_errors_ftype.
+
+Mon Jan 18 08:47:02 1999  Andrew Cagney  <cagney@b1.cygnus.com>
+	
+	* defs.h (catch_errors_ftype): Define.
+	(catch_errors): Replace char* arg with PTR arg.
+	* top.c (catch_errors): Update
+
+	* breakpoint.c (bpstat_stop_status, bpstat_stop_status,
+ 	delete_breakpoint, breakpoint_re_set): Delete all casts in call to
+ 	catch_errors.
+ 	(breakpoint_cond_eval, watchpoint_check,
+ 	cover_target_enable_exception_callback, breakpoint_re_set_one):
+ 	Arg is PTR not char*.
+	
+	* breakpoint.c (cover_target_enable_exception_callback): Change
+ 	type to int. Check for cast values of 0 and -1.  Return a result!
+	(insert_breakpoints): Move declaration of SAL and ARGS to where
+ 	they are used.
+
+1999-01-16  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* remote.c (remote_query): new function - creates proper interface
+	to the remote protocol "q" command.	
+
+Fri Jan 15 17:11:48 EST 1999  Zdenek Radouch   (radouch@cygnus.com)
+
+	* config/fr30/tm-fr30.h:  Changed ABI to match GCC change
+	  (always use pointer for structs passed by value).
+
+1999-01-15  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* target.h: added entry for target queries (to_query)
+	  target.c: ditto.
+
+Thu Jan 14 18:29:17 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* remote-mm.c (mm_wait): fix stream arg to gdb_flush.
+	* remote-udi.c (udi_wait): fix stream arg to fwrite.
+	* symmisc.c (maintenance_check_symtabs): fix stream argument to
+	print_address_numeric.
+	
+Wed Jan 13 19:33:16 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* breakpoint.c (insert_breakpoints): insert cast to eliminate
+	warning.
+
+Wed Jan 13 14:59:02 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* infrun.c (set/show scheduler-locking) New command.  Set a
+	  mode bit that will control how GDB attempts to control thread
+	  scheduling for step, continue, etc.  (resume): make use of
+	  the schedule-locking mode.
+	* target.h (struct target_ops): new field to_has_thread_control.
+	* sol-thread.c: initialize target_ops to_has_thread_control.
+	* procfs.c: ditto.
+	* target.c: ditto.
+	* m3-nat.c: ditto.
+	* remote.c: ditto.
+	* hpux-thread.c: ditto.
+	* thread.c: cull duplicate prototypes.  Move prototypes to top.
+	* serial.c: indentation cleanup.
+	* breakpoint.c: add casts to eliminate compiler warnings.
+	
+Tue Jan 12 17:00:00 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+	* inftarg.c (child_create_inferior): fixed HPUXHPPA specific
+	  call to fork_inferior. The shell param is now NULL.
+
+1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* monitor.c (init_base_monitor_ops): Whitespace cleanup.
+	(_initialize_remote_monitors): Same.
+
+1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* monitor.c (init_monitor_ops): Initialize the monitor_ops
+	structure if it hasn't already been done.
+
+Tue Jan 12 14:50:10 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* inftarg.c (child_ops): Don't initialize statically.
+	(init_child_ops): New function, fills in child_ops.
+	(_initialize_inftarg): Use it.
+	(child_post_attach): Declare extern.
+	(child_wait): Fix ambiguous parens.
+	(child_attach_to_process): Remove unused local wstatus.
+	(child_insert_fork_catchpoint, child_remove_fork_catchpoint,
+	child_insert_vfork_catchpoint, child_remove_vfork_catchpoint,
+	child_has_forked, child_insert_exec_catchpoint,
+	child_remove_exec_catchpoint): Return a value.
+
+Mon Jan 11 16:43:44 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* remote.c (remote_wait): Add inferior_pid to thread list only
+	if it is not already there.
+
+1999-01-11  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* scm-tags.h: Update FSF's address on copyright notice.
+	* ser-e7kpc.c: Same.
+	* gnu-nat.h: Same.
+
+Mon Jan 11 13:45:57 1999  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* dwarf2read.c (dump_die):  Change stderr to gdb_stderr.
+	* expprint.c (print_subexp):  fprintf => fprintf_unfiltered.
+	* jv-typeprint.c (java_type_print_base):  fputs => fputs_filtered.
+	* stack.c (struct function_bounds):  Remove superfluous `typedef'.
+	* symfile.c (list_overlays_command):  stdout => gdb_stdout.
+	* symmisc.c (maintenance_check_symtabs):  stdout => gdb_stdout.
+	* utils.c (print_spaces):  Make more efficient.
+	
+Mon Jan 11 13:55:51 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* utils (print_spaces): fix arg to strcat; fix formatting.
+
+Fri Jan  8 11:57:24 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* exec.c (exec_ops): Don't initialize statically.
+	(init_exec_ops): New function, fills in exec_ops.
+	(_initialize_exec): Use it.
+
+Thu Jan  7 17:50:15 EST 1999  Zdenek Radouch   (radouch@cygnus.com)
+
+	Beta FR30 port.
+	* fr30-tdep.c
+	* config/fr30/tm-fr30.h
+	
+Wed Jan  6 12:28:35 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* configure.in: Add an --enable-tui argument.  Construct
+ 	tui/Makefile from tui/Makefile.in.  Use AM_PROG_CC_STDC.  If we
+ 	have the GUI, then we need this to process libgui.h.
+	(ENABLE_CFLAGS): define and export BUILD_TUI.
+	(AC_CHECK_HEADERS): Add check for term.h.
+	
+	* configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
+
+	* config.in, configure : regenerated.
+
+	* Makefile.in: Allow the TUI code to be conditionally enabled.
+	(TUI_LIBRARY): New variable, value are set by the configuration
+ 	script.  Set to the empty string when the TUI isn't enabled.
+	(gdb$(GDBEXT)): Use those, instead of referring to all-tui and
+ 	tui/libtui.a directly.
+	(BUILD_TUI): build the tui -- only when configured with
+ 	--enable-tui.
+	(YLWRAP): use ylwrap to avoid problems on systems w/o bison.
+	(gdb$(EXEEXT)): make it dependent on BUILD_TUI.
+	(all-tui): remove dependency from phony target.
+	(c-exp.tab.c): use ylwrap instead of bison.
+	(jv-exp.tab.c): ditto.
+	(f-exp.tab.c): ditto.
+	(m2-exp.tab.c): ditto.
+	(ALLDEPFILES): add somread.c, hp-psymtab-read.c, hp-symtab-read.c.
+	(SFILES): remove the above files
+	(COMMON_OBS): remove somread.o
+	(SFILES): Add the tui files to this, so they get included in etags
+ 	tables.
+	(gdb$(EXEEXT)): Add all-tui to the list of dependencies, and add
+ 	tui/libtui.a to the link list.
+	(all-tui): New rule, which does a recursive make in the tui
+ 	subdir.
+	(tui/libtui.a): When recursing, pass down ${FLAGS_TO_PASS}.  And
+ 	don't echo the make command.  This is closer to what the other
+ 	recursions do.
+	(HFILES_NO_SRCDIR): add hpread.h
+	(COMMON_OBS): add hp-psymtab-read.o, hp-symtab-read.o
+        (SFILES): add hp-psymtab-read.c, hp-symtab-read.c add rules for
+ 	the new files.  Remove hpread.c, hpread.o
+	(gdb$(EXEEXT)): Depend on the actual tui library, not on a
+ 	fictitious target.  Since the fictitious target never existed,
+ 	make would always relink.
+	(tui/libtui.a): Always recurse to make sure the library is up to
+ 	date.
+
+Wed Jan  6 12:05:12 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c: Pacify --enable-build-warnings, reformat code
+	to conform to standards, fix spelling errors.
+	(ishex, stubhex, record_currthread, etc): Declare.
+	(ishex, stubhex): Declare char arg as int.
+	(pack_string): Comment out, never used but possibly useful.
+	(threadref_to_int, remote_get_threadinfo, etc): Make static.
+
+Wed Jan  6 11:43:32 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Elena Zannoni
+ 	<ezannoni@cygnus.com> and Edith Epstein <eepstein@cygnus.com> as
+ 	part of a project to merge in changes made by HP.
+
+	* c-exp.y: use external flag hp_som_som_object_present to decide
+ 	whether code was compiled by HP's compilers.  Add two new C++
+ 	tokens for true and false.
+        (yylex): check for template name is done differently for the
+ 	HP/aCC compiler case.  Change some of the template processing code
+ 	for handling HP aCC templates.  Handle true and false tokens.
+	
+Tue Jan  5 11:13:36 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* remote.c (record_curthread): Must not modify inferior_pid when
+ 	called from wait_for_inferior.  Instead, if a new thread-id is
+ 	detected, call add_thread.
+	(MAGIC_NULL_PID): new macro, use instead of the magic number
+ 	"42000".
+	(remote_find_new_threads): if inferior_pid is unknown, get and use
+ 	the current thread id.
+	(remote_start_remote): on connecting, attempt to get the current
+ 	thread id for inferior_pid.
+	(remote_resume): If pid == -1, then resume any-thread (not the
+ 	current thread specifically).  Also some cosmetic fixups.
+	
+	* thread.c (info_threads_command): don't initialize current_pid 
+	until after call to FIND_NEW_THREADS (which may change inferior_pid).
+	Also some cosmetic fixups.
+	* infrun.c: cosmetic fixups and casts to avoid warnings.
+	* infcmd.c: cosmetic fixups, mainly long lines.
+	
+Tue Jan  5 11:55:57 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* target.c (noprocess): terminate sentence with a period.
+	* breakpoint.c (catch_command_1): ditto.
+
+	* c-valprint.c (c_value_print): remove hack^2 from HP; it causes
+	testsuite losses with no real gain.
+
+	* inferior.h (START_INFERIOR_TRAPS_EXPECTED): restore, but only
+	if tm-*.h hasn't overridden default value.
+
+1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Fix whitespace indentation for --help.
+	* configure: Regenerated.
+
+1999-01-04  Manuel Bouyer <bouyer@antioche.lip6.fr>
+
+	* main.c: Add --write command line option, document -w.
+	* gdb.1: Document --write.
+
+1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Require autoconf 2.12.1 or higher.
+	* doc/configure.in: Ditto.
+	* nlm/configure.in: Ditto.
+	* rdi-share/configure.in: Ditto.
+	* testsuite/configure.in: Ditto.
+	* doc/Makefile.in: Don't hardcode $(SHELL).
+	* nlm/Makefile.in: Ditto.
+	* rdi-share/Makefile.in: Ditto.
+	* testsuite/Makefile.in: Ditto.
+
+Mon Jan  4 12:53:03 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-vx.c (init_vx_ops, init_vx_run_ops): Remove unneeded
+	inits of new fields, including ref to bogus field.
+	(vx_ops, vx_run_ops): Make static.
+
+Mon Jan  4 15:05:29 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* inferior.h (START_INFERIOR_TRAPS_EXPECTED): delete,
+	already defined in tm.h.
+
+	* inftarg.c: change <sys/unistd.h> to <unistd.h> and
+	conditionalize its inclusion.
+	* infttrace.c: ditto.
+
+For older changes see ChangeLog-98
+
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-3.x b/gdb/ChangeLog-3.x
new file mode 100644
index 0000000..672aa3d
--- /dev/null
+++ b/gdb/ChangeLog-3.x
@@ -0,0 +1,4838 @@
+Tue Jan 23 15:49:47 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (define_symbol): Deal with deftype 'X'.
+
+	* convex-dep.c (wait): Make it pid_t.
+
+	* convex-dep.c (comm_registers_info): accept decimal comm register
+	specification, as "i comm 32768".
+
+	* dbxread.c (process_one_symbol): Make VARIABLES_INSIDE_BLOCK
+	macro say by itself where variables are.  Pass it desc.
+	m-convex.h (VARIABLES_INSIDE_BLOCK): Nonzero for native compiler.
+
+	* m-convex.h (SET_STACK_LIMIT_HUGE): Define.
+	(IGNORE_SYMBOL): Take out #ifdef N_MONPT and put in 0xc4.
+
+Fri Jan 19 20:04:15 1990  Jim Kingdon  (kingdon at albert.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): Always set highest_offset to
+	current_offset when former is -1.
+
+	* dbxread.c (read_struct_type): Print nice error message
+	when encountering multiple inheritance.
+
+Thu Jan 18 13:43:30 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Always treat N_FN as a potential
+	source for a x.o or -lx symbol, ignoring OFILE_FN_FLAGGED.
+
+	* printcmd.c (print_frame_args): Cast -1 to (CORE_ADDR).
+
+	* hp300bsd-dep.c (_initialize_hp300_dep): Get kernel_u_addr.
+	m-hp300bsd.h (KERNEL_U_ADDR): Use kernel_u_addr.
+
+	* infcmd.c (run_command): #if 0 out call to
+	breakpoint_clear_ignore_counts.
+
+Thu Jan 11 12:58:12 1990  Jim Kingdon  (kingdon at mole)
+
+	* printcmd.c (print_frame_args) [STRUCT_ARG_SYM_GARBAGE]:
+	Try looking up name of var before giving up & printing '?'.
+
+Wed Jan 10 14:00:14 1990  Jim Kingdon  (kingdon at pogo)
+
+	* many files: Move stdio.h before param.h.
+
+	* sun3-dep.c (store_inferior_registers): Only try to write FP
+	regs #ifdef FP0_REGNUM.
+
+Mon Jan  8 17:56:15 1990  Jim Kingdon  (kingdon at pogo)
+
+	* symtab.c: #if 0 out "info methods" code.
+
+Sat Jan  6 12:33:04 1990  Jim Kingdon  (kingdon at pogo)
+
+	* dbxread.c (read_struct_type): Set TYPE_NFN_FIELDS_TOTAL
+	from all baseclasses; remove vestigial variable baseclass.
+
+	* findvar.c (read_var_value): Check REG_STRUCT_HAS_ADDR.
+	printcmd.c (print_frame_args):  Check STRUCT_ARG_SYM_GARBAGE.
+	m-sparc.h: Define REG_STRUCT_HAS_ADDR and STRUCT_ARG_SYM_GARBAGE.
+
+	* blockframe.c (get_frame_block): Subtract one from pc if not
+	innermost frame.
+
+Fri Dec 29 15:26:33 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): check highest_offset != -1, not i.
+
+Thu Dec 28 16:21:02 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valops.c (value_struct_elt): Clean up error msg.
+
+	* breakpoint.c (describe_other_breakpoints):
+	Delete extra space before "also set at" and add period at end.
+
+Tue Dec 19 10:28:42 1989  Jim Kingdon  (kingdon at pogo)
+
+	* source.c (print_source_lines): Tell user which line number
+	was out of range when printing error message.
+
+Sun Dec 17 14:14:09 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* blockframe.c (find_pc_partial_function): Use
+	BLOCK_START (SYMBOL_BLOCK_VALUE (f)) instead of
+	SYMBOL_VALUE (f) to get start of function.
+
+	* dbxread.c: Make xxmalloc just a #define for xmalloc.
+
+Thu Dec 14 16:13:16 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m68k-opcode.h (fseq & following fp instructions):
+	Change @ to $.
+
+Fri Dec  8 19:06:44 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* breakpoint.c (breakpoint_clear_ignore_counts): New function.
+	infcmd.c (run_command): Call it.
+
+Wed Dec  6 15:03:38 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valprint.c: Change it so "array-max 0" means there is
+	no limit.
+
+	* expread.y (yylex): Change error message "invalid token in
+	expression" to "invalid character '%c' in expression".
+
+Mon Dec  4 16:12:54 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* blockframe.c (find_pc_partial_function): Always return 1
+	for success, 0 for failure, and set *NAME and *ADDRESS to
+	match the return value.
+
+	* dbxread.c (symbol_file_command): Use perror_with_name on
+	error from stat.
+	(psymtab_to_symtab, add_file_command),
+	core.c (validate_files), source.c (find_source_lines),
+	default-dep.c (exec_file_command): Check for errors from stat,
+	fstat, and myread.
+
+Fri Dec  1 05:16:42 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valops.c (check_field): When following pointers, just get
+	their types; don't call value_ind.
+	
+Thu Nov 30 14:45:29 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* config.gdb (pyr): New machine.
+	core.c [REG_STACK_SEGMENT]: New code.
+	dbxread.c (process_one_symbol): Cast return from copy_pending
+	to long before casting to enum namespace.
+	infrun.c: Split registers_info into DO_REGISTERS_INFO
+	and registers_info.
+	m-pyr.h, pyr-{dep.c,opcode.h,pinsn.c}: New files.
+
+	* hp300bsd-dep.c: Stay in sync with default-dep.c.
+
+	* m-hp300bsd.h (IN_SIGTRAMP): Define.
+
+Mon Nov 27 23:48:21 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE):
+	Return floating point values in %f0.
+
+Tue Nov 21 00:34:46 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (read_type): #if 0 out code which skips to
+	comma following x-ref.
+
+Sat Nov 18 20:10:54 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valprint.c (val_print): Undo changes of Nov 11 & 16.
+	(print_string): Add parameter force_ellipses.
+	(val_print): Pass force_ellipses true when we stop fetching string
+	before we get to the end, else pass false.
+
+Thu Nov 16 11:59:50 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* infrun.c (restore_inferior_status): Don't try to restore
+	selected frame if the inferior no longer exists.
+
+	* valprint.c (val_print): Rewrite string printing code not to
+	call print_string.
+
+	* Makefile.dist (clean): Remove xgdb and xgdb.o.
+
+Tue Nov 14 12:41:47 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* Makefile.dist (XGDB, bindir, xbindir, install, all): New stuff.
+
+Sat Nov 11 15:29:38 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valprint.c (val_print): chars_to_get: New variable.
+
+Thu Nov  9 12:31:47 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* main.c (main): Process "-help" as a switch that doesn't
+	take an argument.
+
+Wed Nov  8 13:07:02 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* Makefile.dist (gdb.tar.Z): Add "else true".
+
+Tue Nov  7 12:25:14 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* infrun.c (restore_inferior_status): Don't dereference fid if NULL.
+
+	* config.gdb (sun3, sun4): Accept "sun3" and "sun4".
+
+Mon Nov  6 09:49:23 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* Makefile.dist (Makefile): Move comments after commands.
+
+	* *-dep.c [READ_COFF_SYMTAB]: Pass optional header size to
+	read_section_hdr().
+
+	* inflow.c: Include <fcntl.h> regardless of USG.
+
+	* coffread.c (read_section_hdr): Add optional_header_size.
+	(symbol_file_command): Pass optional header size to
+	read_section_hdr().
+	(read_coff_symtab): Initialize filestring.
+
+	* version.c: Change version to 3.4.xxx.
+
+	* GDB 3.4 released.
+
+Sun Nov  5 11:39:01 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* version.c: Change version to 3.4.
+
+	* symtab.c (decode_line_1): Only skip past "struct" if it
+	is there.
+
+	* valops.c (value_ind), eval.c (evaluate_subexp, case UNOP_IND):
+	Have "*" <int-valued-exp> return an int, not a LONGEST.
+
+	* utils.c (fprintf_filtered): Pass arg{4,5,6} to sprintf.
+
+	* printcmd.c (x_command): Use variable itself rather
+	than treating it as a pointer only if it is a function.
+	(See comment "this makes x/i main work").
+
+	* coffread.c (symbol_file_command): Use error for
+	"%s does not have a symbol-table.\n".
+
+Wed Nov  1 19:56:18 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c [BELIEVE_PCC_PROMOTION_TYPE]: New code.
+	m-sparc.h: Define BELIEVE_PCC_PROMOTION_TYPE.
+
+Thu Oct 26 12:45:00 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* infrun.c: Include <sys/dir.h>.
+
+	* dbxread.c (read_dbx_symtab, case N_LSYM, case 'T'):
+	Check for enum types and put constants in psymtab.
+
+Mon Oct 23 15:02:25 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (define_symbol, read_dbx_symtab): Handle enum
+	constants (e.g.	"b:c=e6,0").
+
+Thu Oct 19 14:57:26 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* stack.c (frame_info): Use FRAME_ARGS_ADDRESS_CORRECT
+	m-vax.h (FRAME_ARGS_ADDRESS_CORRECT): New macro.
+	(FRAME_ARGS_ADDRESS): Restore old meaning.
+
+	* frame.h (Frame_unknown): New macro.
+	stack.c (frame_info): Check for Frame_unknown return from
+	FRAME_ARGS_ADDRESS.
+	m-vax.h (FRAME_ARGS_ADDRESS): Sometimes return Frame_unknown.
+
+	* utils.c (fatal_dump_core): Add "internal error" to message.
+
+	* infrun.c (IN_SIGTRAMP): New macro.
+	(wait_for_inferior): Use IN_SIGTRAMP.
+	m-vax.h (IN_SIGTRAMP): New macro.
+
+Wed Oct 18 15:09:22 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* config.gdb, Makefile.dist: Shorten m-i386-sv32.h.
+
+	* coffread.c (symbol_file_command): Pass 0 to select_source_symtab.
+
+Tue Oct 17 12:24:41 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* i386-dep.c (i386_frame_num_args): Take function from m-i386.h
+	file.  Check for pfi null.
+	m-i386.h (FRAME_NUM_ARGS): Use i386_frame_num_args.
+
+	* infrun.c (wait_for_inferior): set stop_func_name to 0
+	before calling find_pc_partial_function.
+
+Thu Oct 12 01:08:50 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* breakpoint.c (_initialize_breakpoint): Add "disa".
+
+	* Makefile.dist: Add GLOBAL_CFLAGS and pass to readline.
+
+	* config.gdb (various): "$machine =" -> "machine =".
+
+Wed Oct 11 11:54:31 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* inflow.c (try_writing_regs): #if 0 out this function.
+
+	* main.c (main): Add "-help" option.
+
+	* dbxread.c (read_dbx_symtab): Merge code for N_FUN with
+	N_STSYM, etc.
+
+Mon Oct  9 14:21:55 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* inflow.c (try_writing_regs_command): Don't write past end
+	of struct user.
+
+	* dbxread.c (read_struct_type): #if 0 out code which checks for
+	bitpos and bitsize 0.
+
+	* config.gdb: Accept sequent-i386 (not seq386).
+	(symmetry): Set depfile and paramfile.
+
+	* m-convex.h (IGNORE_SYMBOL): Check for N_MONPT if defined.
+
+Thu Oct  5 10:14:26 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* default-dep.c (read_inferior_memory): Put #if 0'd out comment
+	within /* */.
+
+Wed Oct  4 18:44:41 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* config.gdb: Change /dev/null to m-i386.h for various
+	386 machine "opcodefile" entries.
+
+	* config.gdb: Accept seq386 for sequent symmetry.
+
+Mon Oct  2 09:59:50 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* hp300bsd-dep.c:  Fix copyright notice.
+
+Sun Oct  1 16:25:30 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* Makefile.dist (DEPFILES): Add isi-dep.c.
+
+	* default-dep.c (read_inferior_memory): Move #endif after else.
+
+Sat Sep 30 12:50:16 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* version.c: Change version number to 3.3.xxx.
+
+	* GDB 3.3 released.
+
+	* version.c: Change version number to 3.3.
+
+	* Makefile.dist (READLINE): Add vi_mode.c
+
+	* config.gdb (i386): Change /dev/null to m-i386.h
+
+	* config.gdb: Add ';;' before 'esac'.
+
+	* Makefile.dist (gdb.tar.Z): Move comment above dependency.
+
+	* dbxread.c (read_ofile_symtab): Check symbol before start
+	of source file for GCC_COMPILED_FLAG_SYMBOL.
+	(start_symtab): Don't clear processing_gcc_compilation.
+
+Thu Sep 28 22:30:23 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* valprint.c (print_string): If LENGTH is zero, print "".
+
+Wed Sep 27 10:15:10 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* config.gdb: "rm tmp.c" -> "rm -f tmp.c".
+
+Tue Sep 26 13:02:10 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* utils.c (_initialize_utils): Use termcap to set lines_per_page
+	and chars_per_line.
+
+Mon Sep 25 10:06:43 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab, N_SOL): Do not add the same file
+	more than once.
+
+Thu Sep 21 12:43:18 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* infcmd.c (unset_environment_command): Delete all variables
+	if called with no arg.
+
+	* remote.c, inferior.h (remote_{read,write}_inferior_memory):
+	New functions.
+	core.c ({read,write}_memory): Use remote_{read,write}_inferior_memory.
+
+	* valops.c (call_function): When reserving stack space for
+	arguments, call value_arg_coerce.
+
+	* m-hp9k320.h: define BROKEN_LARGE_ALLOCA.
+
+	* breakpoint.c (delete_command): Ask for confirmation only
+	when there are breakpoints.
+
+	* dbxread.c (read_struct_type): If lookup_basetype_type has
+	copied a stub type, call add_undefined_type.
+
+	* sparc_pinsn.c (compare_opcodes): Check for "1+i" anywhere
+	in args.
+
+	* val_print.c (type_print_base): Print stub types as
+	"<incomplete type>".
+
+Wed Sep 20 07:32:00 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* sparc-opcode.h (swapa): Remove i bit from match.
+	(all alternate space instructions): Delete surplus "foo rs1+0"
+	patterns.
+
+	* Makefile.dist (LDFLAGS): Set to $(CFLAGS).
+
+	* remote-multi.shar (remote_utils.c, putpkt): Change csum to unsigned.
+
+Tue Sep 19 14:15:16 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* sparc-opcode.h: Set i bit in lose for many instructions which
+	aren't immediate.
+
+	* stack.c (print_frame_info): add "func = 0".
+
+Mon Sep 18 16:19:48 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* sparc-opcode.h (mov): Add mov to/from %tbr, %psr, %wim.
+
+	* sparc-opcode.h (rett): Fix notation to use suggested assembler
+	syntax from architecture manual.
+
+	* symmetry-dep.c (I386_REGNO_TO_SYMMETRY): New macro.
+	(i386_frame_find_saved_regs): Use I386_REGNO_TO_SYMMETRY.
+
+Sat Sep 16 22:21:17 1989  Jim Kingdon  (kingdon at spiff)
+
+	* remote.c (remote_close): Set remote_desc to -1.
+
+	* gdb.texinfo (Output): Fix description of echo to match
+	reality and ANSI C.
+
+Fri Sep 15 14:28:59 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (lookup_symbol): Add comment about "asm".
+
+	* sparc-pinsn.c: Use NUMOPCODES.
+
+	* sparc-opcode.h (NUMOPCODES): Use sparc_opcodes[0] not *sparc_opcodes.
+
+Thu Sep 14 15:25:20 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (xxmalloc): Print error message before calling abort().
+
+	* infrun.c (wait_for_inferior): Check for {stop,prev}_func_name
+	null before passing to strcmp.
+
+Wed Sep 13 12:34:15 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* sparc-opcode.h: New field delayed.
+	sparc-pinsn.c (is_delayed_branch): New function.
+	(print_insn): Check for delayed branches.
+
+	* stack.c (print_frame_info): Use misc_function_vector in
+	case where ar truncates file names.
+
+Tue Sep 12 00:16:14 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* convex-dep.c (psw_info): Move "struct pswbit *p" with declarations.
+
+Mon Sep 11 14:59:57 1989  Jim Kingdon  (kingdon at spiff)
+
+	* convex-dep.c (core_file_command): Delete redundant printing
+	of "Program %s".
+
+	* m-convex.h (ENTRY_POINT): New macro.
+
+	* m-convex.h (FRAME_CHAIN_VALID): Change outside_first_object_file
+	to outside_startup_file
+
+	* main.c: #if 0 out catch_termination and related code.
+
+	* command.c (lookup_cmd_1): Consider underscores part of
+	command names.
+
+Sun Sep 10 09:20:12 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* printcmd.c: Change asdump_command to disassemble_command
+	(_initialize_printcmd): Change asdump to diassemble.
+
+	* main.c (main): Exit with code 0 if we hit the end of a batch
+	file.
+
+	* Makefile.dist (libreadline.a): Fix syntax of "CC=${CC}".
+
+Sat Sep  9 01:07:18 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* values.c (history_info): Renamed to value_history_info.
+	Command renamed to "info value" (with "info history" still
+	accepted).
+
+	* sparc-pinsn.c (print_insn): Extend symbolic address printing
+	to cover "sethi" following by an insn which uses 1+i.
+
+Fri Sep  8 14:24:01 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-hp9k320.h, m-hp300bsd.h, m-altos.h, m-sparc.h, m-sun3.h
+	(READ_GDB_SYMSEGS): Remove.
+	dbxread.c [READ_GDB_SYMSEGS]: Remove code to read symsegs.
+
+	* sparc-pinsn.c (print_insn): Detect "sethi-or" pairs and
+	print symbolic address.
+
+	* sparc-opcode.h (sethi, set): Change lose from 0xc0000000 to
+	0xc0c00000000. 
+
+	* remote.c (remote_desc): Initialize to -1.
+
+	* Makefile.dist (libreadline.a): Pass CC='${CC}' to readline makefile.
+
+Thu Sep  7 00:07:17 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_struct_type): Check for static member functions.
+	values.c, eval.c, valarith.c, valprint.c, valops.c: Merge changes
+	from Tiemann for static member functions.
+
+	* sparc-opcode.h (tst): Fix all 3 patterns.
+
+	* Makefile.dist (gdb1): New rule.
+
+	* sparc-opcode.h: Change comment about what the disassembler
+	does with the order of the opcodes.
+
+	* sparc-pinsn.c (compare_opcodes): Put 1+i before i+1.
+	Also fix mistaken comment about preserving order of original table.
+
+	* sparc-opcode.h (clr, mov): Fix incorrect lose entries.
+
+	* m-symmetry.h (FRAME_NUM_ARGS): Add check to deal with code that
+	GCC sometimes generates.
+
+	* config.gdb: Change all occurances of "skip" to "/dev/null".
+
+	* README (about languages other than C): Update comments about
+	Pascal and FORTRAN.
+
+	* sparc-opcode.h (nop): Change lose from 0xae3fffff to 0xfe3fffff.
+
+	* values.c (value_virtual_fn_field): #if 0-out assignment to
+	VALUE_TYPE(vtbl).
+
+Wed Sep  6 12:19:22 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* utils.c (fatal_dump_core): New function.
+	Makefile.dist (MALLOC_FLAGS): use -Dbotch=fatal_dump_core
+
+Tue Sep  5 15:47:18 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* breakpoint.c (enable_command): With no arg, enable all bkpts.
+
+	* Makefile.dist (Makefile): Remove \"'s around $(MD).
+
+	* Makefile.dist: In "cd readline; make . . ." change first
+	SYSV_DEFINE to SYSV.
+
+	* m68k-pinsn.c (_initialize_pinsn): Use alternate assembler
+	syntax #ifdef HPUX_ASM
+
+Sat Sep  2 23:24:43 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* values.c (history_info): Don't check num_exp[0] if num_exp
+	is nil (just like recent editing_info change).
+
+Fri Sep  1 19:19:01 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* gdb.texinfo (inc-history, inc-readline): Copy in the inc-* files
+	because people might not have makeinfo.
+
+	* README (xgdb): Strengthen nasty comments.
+
+	* gdb.texinfo: Change @setfilename to "gdb.info".
+
+Thu Aug 31 17:23:50 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* main.c (editing_info): Don't check arg[0] if arg is null.
+
+	* m-vax.h: Add comment about known sigtramp bug.
+
+	* sun3-dep.c, sparc-dep.c (IS_OBJECT_FILE, exec_file_command):
+	Get right text & data addresses for .o files.
+
+Wed Aug 30 13:54:19 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* utils.c (tilde_expand): Remove function (it's in readline).
+
+	* sparc-opcode.h (call): Change "8" to "9" in first two
+	patterns (%g7->%o7).
+
+Tue Aug 29 16:44:41 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* printcmd.c (whatis_command): Change 4th arg to type_print
+	from 1 to -1.
+
+Mon Aug 28 12:22:41 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (psymtab_to_symtab_1): In "and %s ..." change
+	pst->filename to pst->dependencies[i]->filename.
+
+	* blockframe.c (FRAMELESS_LOOK_FOR_PROLOGUE): New macro
+	made from FRAMELESS_FUNCTION_INVOCATION from m-sun3.h except
+	that it checks for zero return from get_pc_function_start.
+	m-hp9k320.h, m-hp300bsd.h, m-i386.h, m-isi.h, m-altos.h,
+	m-news.h, m-sparc.h, m-sun2.h, m-sun3.h, m-symmetry.h
+	(FRAMELESS_FUNCTION_INVOCATION): Use FRAMELESS_LOOK_FOR_PROLOGUE.
+
+	* dbxread.c (read_struct_type): Give warning and ignore field
+	if bitpos and bitsize are zero.
+
+Sun Aug 27 04:55:20 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (psymtab_to_symtab{,_1}): Print message about
+	reading in symbols before reading stringtab, not after.
+
+Sat Aug 26 02:01:53 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (IS_OBJECT_FILE, ADDR_OF_TEXT_SEGMENT): New macros.
+	(read_dbx_symtab): Use text_addr & text_size to set end_of_text_addr.
+	(symbol_file_command): pass text_addr & text_size to read_dbx_symtab.
+
+Fri Aug 25 23:08:13 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* valprint.c (value_print): Try to give the name of function
+	pointed to when printing a function pointer.
+
+Thu Aug 24 23:18:40 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* core.c (xfer_core_file): In cases where MEMADDR is above the
+	largest address that makes sense, set i to len.
+
+Thu Aug 24 16:04:17 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* valprint.c (print_string): New function to print a character
+	string, doing array-max limiting and repeat count processing.
+	(val_print, value_print): Use print_string.
+	(REPEAT_COUNT_THRESHOLD): New #define, the max number of elts to print
+	without using a repeat count.  Set to ten.
+	(value_print, val_print): Use REPEAT_COUNT_THRESHOLD.
+
+	* utils.c (printchar): Use {fputs,fprintf}_filtered.
+
+	* valprint.c (val_print): Pass the repeat count arg to the
+	fprintf_filtered call for "<repeats N times>" messages.
+
+Wed Aug 23 22:53:47 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* utils.c: Include <pwd.h>.
+
+	* main.c: Declare free.
+
+Wed Aug 23 05:05:59 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* utils.c, defs.h: Add tilde_expand.
+	source.c (directory_command),
+	main.c (cd_command),
+	main.c (set_history_filename),
+	dbxread.c (symbol_file_command),
+	coffread.c (symbol_file_command),
+	dbxread.c (add_file_command),
+	symmisc.c (print_symtabs),
+	*-dep.c (exec_file_command, core_file_command),
+	main.c (source_command): Use tilde_expand.
+
+	* dbxread.c (read_type): When we get a cross-reference, resolve
+	it immediately if possible, only calling add_undefined_type if
+	necessary.
+
+	* gdb.texinfo: Uncomment @includes and put comment at start
+	of file telling people to use makeinfo.
+
+	* valprint.c (type_print_base): Print the right thing for
+	bitfields.
+
+	* config.gdb (sun3os3): Set paramfile and depfile.
+
+Tue Aug 22 05:38:36 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (symbol_file_command):  Pass string table size to
+	read_dbx_symtab().
+	(read_dbx_symtab): Before indexing into string table, check
+	string table index for reasonableness.
+	(psymtab_to_symtab{,_1}, read_ofile_symtab): Same.
+
+Tue Aug 22 04:04:39 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* m68k-pinsn.c: Replaced many calls to fprintf and fputs with
+	calls to fprintf_filtered and fputs_filtered.
+	(print_insn_arg): Use normal MIT 68k syntax for postincrement,
+	predecrement, and register indirect addressing modes.
+
+Mon Aug 21 10:08:02 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* main.c (initialize_signals): Set signal handler for SIGQUIT
+	and SIGHUP to do_nothing.
+
+	* ns32k-opcode.h (ord): Change 1D1D to 1D2D.
+
+	* ns32k-pinsn.c (print_insn_arg, print_insn): Handle index
+	bytes correctly.
+
+	* ns32k-opcode.h: Add comments.
+
+	* dbxread.c (read_type): Put enum fields in type.fields in order
+	that they were found in the debugging symbols (not reverse order).
+
+Sun Aug 20 21:17:13 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* main.c (source_command): Read .gdbinit if run without argument.
+
+	* source.c (directory_command): Only print "foo already in path"
+	if from_tty.
+
+	* version.c: Change version number to 3.2.xxx
+
+Sat Aug 19 00:24:08 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* m-news.h: Define HAVE_WAIT_STRUCT.
+
+	* m-isi.h, isi-dep.c: Replace with new version from Adam de Boor.
+	config.gdb: Remove isibsd43.
+
+	* main.c (catch_termination): Don't say we have written
+	.gdb_history until after we really have.
+
+	* convex-dep.c (attach): Add "sleep (1)".
+	(write_vector_register): Use "LL" with long long constant.
+	(wait): Close comment.
+	(wait): Change "unix 7.1 bug" to "unix 7.1 feature" & related
+	changes in comment.
+	(scan_stack): And fp with 0x80000000 in while loop test.
+	(core_file_command): Move code to set COREFILE.
+	(many places): Change printf to printf_filtered.
+	(psw_info): Allow argument giving value to print as a psw.
+	(_initialize_convex_dep): Update docstrings.
+
+	* m-convex.h (WORDS_BIG_ENDIAN): Correct typo ("WRODS")
+	define NO_SIGINTERRUPT.
+	define SET_STACK_LIMIT_HUGE.
+	add "undef BUILTIN_TYPE_LONGEST" before defining it.
+	Use "LL" after constants in CALL_DUMMY.
+
+	* dbxread.c: In the 3 places it says error "ridiculous string
+	table size"... delete extra parameter to error.
+
+	* dbxread.c (scan_file_globals): Check for FORTRAN common block.
+	Allow multiple references for the sake of common blocks.
+
+	* main.c (initialize_main): Set history_filename to include
+	current directory.
+
+	* valprint.c (decode_format): Don't return a defaulted size
+	field if osize is zero.
+
+	* gdb.texinfo (Compilation): Update information on -gg symbols.
+	Document problem with ar.
+
+Fri Aug 18 19:45:20 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (val_print, value_print): Add "<repeats %d times>" code.
+	Also put "..." outside quotes for strings.
+
+	* main.c (initialize_main): Add comment about history output file
+	being different from history input file.
+
+	* m-newsos3.h: Undefine NO_SIGINTERRUPT.  Rearrange a few comments.
+
+	* m-newsos3.h (REGISTER_U_ADDR): Use new version from Hikichi.
+
+	* sparc-opcode.h: Add comment clarifying meaning of the order of
+	the entries in sparc_opcodes.
+
+	* eval.c (evaluate_subexp, case UNOP_IND): Deal with deferencing
+	things that are not pointers.
+
+	* valops.c (value_ind): Make dereferencing an int give a LONGEST.
+
+	* expprint.c (print_subexp): Add (int) cast in OP_LAST case.
+
+	* dbxread.c (read_array_type): Set lower and upper if adjustable.
+
+	* symtab.c (lookup_symbol): Don't abort if symbol found in psymtab
+	but not in symtab.
+
+Thu Aug 17 15:51:20 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* config.gdb: Changed "Makefile.c" to "Makefile.dist".
+
+Thu Aug 17 01:58:04 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)
+
+	* sparc-opcode.h (or): Removed incorrect lose bit 0x08000000.
+	[many]: Changed many `lose' entries to have the 0x10 bit set, so
+	they don't think %l0 is %g0.
+
+Wed Aug 16 00:30:44 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-symmetry.h (STORE_STRUCT_RETURN): Also write reg 0.
+	(EXTRACT_RETURN_VALUE): Call symmetry_extract_return_value.
+	symmetry-dep.c (symmetry_extract_return_value): New fn.
+
+	* main.c (symbol_completion_function): Deal with changed
+	result_list from lookup_cmd_1 for ambiguous return.
+	command.c (lookup_cmd): Same.
+
+	* inflow.c [TIOCGETC]: Move #include "param.h" back before
+	system #includes.  Change all #ifdef TIOCGETC to
+	#if defined(TIOCGETC) && !defined(TIOCGETC_BROKEN)
+	m-i386-sysv3.2.h, m-i386gas-sysv3.2.h: Remove "#undef TIOCGETC"
+	and add "#define TIOCGETC_BROKEN".
+
+	* command.c (lookup_cmd_1): Give the correct result_list in the
+	case of an ambiguous return where there is a partial match
+	(e.g. "info a").  Add comment clarifying what is the correct
+	result_list.
+
+	* gdb.texinfo (GDB History): Document the two changes below.
+
+	* main.c (command_line_input): Make history expansion not
+	just occur at the beginning of a line.
+
+	* main.c (initialize_main): Make history expansion off by default.
+
+	* inflow.c: Move #include "param.h" after system #includes.
+
+	* i386-dep.c (i386_float_info): Use U_FPSTATE macro.
+
+	* m-i386-sysv3.2.h, m-i386gas-sysv3.2.h: New files.
+	Makefile.dist, config.gdb: Know about these new files.
+
+Tue Aug 15 21:36:11 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* symtab.c (lookup_struct_elt_type): Use type_print rather
+	than assuming type has a name.
+
+Tue Aug 15 02:25:43 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)
+
+	* sparc-opcode.h (mov): Removed bogus "or i,0,d" pattern.
+
+	* sparc-opcode.h (mov, or): Fixed incorrect `lose' members.
+
+	* sparc-dep.c: Don't include "sparc-opcode.h".
+	(skip_prologue, isanulled): Declare special types to recognize
+	instructions, and use them.
+
+	* sparc-pinsn.c (print_insn): Sign-extend 13-bit immediate args.
+	If they are less than +9, print them in signed decimal instead
+	of unsigned hex.
+
+	* sparc-opcode.h, sparc-pinsn.c: Completely rewritten to share an
+	opcode table with gas, and thus produce disassembly that looks
+	like what the assembler accepts.
+
+Tue Aug 15 16:20:52 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (find_pc_psymbol): Move best_pc=psymtab->textlow-1
+	after test for psymtab null.
+
+	* main.c (editing_info): Remove variable retval.
+
+	* config.gdb (sun3, isi): Comment out obsolete message about telling
+	it whether you have an FPU (now that it detects it).
+
+	* config.gdb (sun3): Accept sun3os3.
+
+	* m68k-insn.h: Include <signal.h>.
+
+	* m68k-pinsn.h (convert_{to,from}_68881): Add have_fpu code
+
+	* m-newsos3.h: Undefine USE_PCB.  That code didn't seem to work.
+
+	* sparc-dep.c: Put in insn_fmt and other stuff from the old
+	sparc-opcode.h.
+
+	* sparc-opcode.h, sparc-pinsn.c: Correct copyright notice.
+
+	* sparc-opcode.h, sparc-pinsn.c: Replace the old ones with the new
+	ones by roland.
+
+Tue Aug 15 02:25:43 1989  Roland McGrath  (roland at apple-gunkies.ai.mit.edu)
+
+	* Makefile.dist: Don't define CC at all.
+
+	* Makefile.dist (Makefile): Remove tmp.c after preprocessing.
+	Use $(MD) instead of M_MAKEDEFINE in the cc command.
+
+	* Makefile.dist: Don't define RL_LIB as
+	"${READLINE}/libreadline.a", since READLINE is a list of files.
+
+Mon Aug 14 23:49:29 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* main.c (print_version): Change 1988 to 1989.
+
+	* main.c (copying_info, initialize_main): Remove #if 0'd code.
+
+Tue Aug  1 14:44:56 1989  Hikichi  (hikichi at sran203)
+
+	* m-newsos3.h
+	    (NO_SIGINTERRUPT): have SIGINTERRUPT on NEWS os 3.
+
+	* m-news.h(FRAME_FIND_SAVED_REGS): use the sun3's instead of old
+	one.
+
+Mon Aug 14 15:27:01 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-news.h, m-newsos3.h, news-dep.c: Merge additional changes
+	by Hikichi (ChangeLog entries above).
+
+	* Makefile.dist (READLINE): List readline files individually
+	so we don't accidently get random files from the readline
+	directory.
+
+	* m-news.h (STORE_RETURN_VALUE, EXTRACT_RETURN_VALUE):
+	Expect floating point returns to be in fp0.
+
+	* gdb.texinfo (Format options): New node.
+
+	* gdb.texinfo: Comment out "@include"s until bfox fixes the
+	readline & history docs.
+
+	* dbxread.c (read_addl_syms): Set startup_file_* if necessary at
+	the end (as well as when we hit ".o").
+
+	* printcmd.c (decode_format): Set val.format & val.size to '?' at
+	start and set defaults at end.
+
+	* symtab.c (decode_line_1): Check for class_name null.
+
+	* valops.c: Each place where it compares against field names,
+	check for null field names.  (new t_field_name variables).
+
+	* utils.c (fputs_filtered): Check for linebuffer null before
+	checking whether to call fputs.  Remove later check for linebuffer
+	null.  
+
+Sun Aug 13 15:56:50 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-isi.h, m-sun3.h ({PUSH,POP}_FP_REGS):  New macros.
+	m-sun3.h (NUM_REGS): Conditionalize on FPU.
+	config.gdb (sun3, isi): Add message about support for machines
+	without FPU.
+
+	* main.c (catch_termination, initialize_signals): new functions.
+
+	* main.c (editing_info): Add "info editing n" and "info editing +".
+	Rewrite much of this function.
+	gdb.texinfo (GDB Readline): Document it.
+
+	* values.c (history_info): Add "info history +".  Also add code to
+	do "info history +" when command is repeated.
+	gdb.texinfo (Value History): Document "info history +".
+
+	* expprint.c (print_subexp): Add OP_THIS to case stmt.
+
+	* config.gdb (sun4os4): Put quotes around make define.
+
+	* config.gdb: Canonicalize machine name at beginning.
+
+Sat Aug 12 00:50:59 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* config.gdb: define M_MAKEDEFINE
+	Makefile (Makefile, MD): Be able to re-make Makefile.
+
+	* main.c (command_line_input): Add comments to
+	the command history.
+
+	* Makefile.dist (Makefile): Add /bin/false.
+
+Fri Aug 11 14:35:33 1989  Jim Kingdon  (kingdon at spiff)
+
+	* Makefile.dist: Comment out .c.o rule and add TARGET_ARCH.
+
+	* m-altos.h: Include sys/page.h & sys/net.h
+
+	* m-altos.h (FRAME_CHAIN{,_VALID}):  Use outside_startup_file.
+
+	* config.gdb (altos, altosgas): Add M_SYSV & M_BSD_NM and remove
+	M_ALLOCA=alloca.o from makedefine.
+
+	* coffread.c (complete_symtab): Change a_entry to entry.
+
+	* m-altosgas.h: New file.
+
+	* m-symmetry (REGISTER_BYTE): Fix dumb mistake.
+
+Fri Aug 11 06:39:49 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* utils.c (set_screensize_command): Check for ARG being nil, since
+	that's what execute_command will pass if there's no argument.
+
+	* expread.y (yylex): Recognize "0x" or "0X" as the beginning of a
+	number.
+
+Thu Aug 10 15:43:12 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* config.gdb, Makefile.dist: Rename Makefile.c to Makefile.dist.
+
+	* m-altos.h: Add comment about porting to USGR2.
+
+	* config.gdb (sparc): Add -Usparc.
+
+Wed Aug  9 14:20:39 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-sun3os4.h: Define BROKEN_LARGE_ALLOCA.
+
+	* values.c (modify_field): Check for value too large to fit in
+	bitfield. 
+
+	* utils.c (fputs_filtered): Allow LINEBUFFER to be NULL.
+
+	* breakpoint.c (condition_command): Check for attempt to specify
+	non-numeric breakpoint number.
+
+	* config.gdb, Makefile, m-altos.h, altos-dep.c: Merge Altos
+	port.
+
+	* README: Change message about editing Makefile.
+
+	* config.gdb: Edit Makefile.
+	Copied Makefile to Makefile.c and changed to let config.gdb
+	run us through the C preprocessor.
+
+	* expread.y (yylex): Test correctly for definition of number.
+
+Wed Aug  9 11:56:05 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Put bracketing of entry point in
+	test case for .o symbols so that it will be correct even without
+	debugging symbols.
+	(end_psymtab): Took bracketing out.
+
+	* blockframe.c (outside_startup_file): Reverse the sense of the
+	return value to make the functionality implied by the name
+	correct. 
+
+Tue Aug  8 11:48:38 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* coffread.c (symbol_file_command): Do  not assume presence of a.out
+	header. 
+
+	* blockframe.c: Replace first_object_file_end with
+	startup_file_{start,end}
+	(outside_startup_file): New function.
+	dbxread.c (read_addl_syms, read_dbx_symtab, end_psymbol): set
+	startup_file_*.  Delete first_object_file_end code.
+	Add entry_point and ENTRY_POINT
+	coffread.c (complete_symtab): Set startup_file_*.
+	(first_object_file_end): Add as static.
+	m-*.h (FRAME_CHAIN, FRAME_CHAIN_VALID): Call outside_startup_file
+	instead of comparing with first_object_file_end.
+
+	* breakpoint.c (breakpoint_1): Change -1 to (CORE_ADDR)-1.
+
+	* config.gdb (i386, i386gas): Add missing quotes at end of "echo"
+
+	* source.c (directory_command): Add dont_repeat ();
+
+Mon Aug  7 18:03:51 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* dbxread.c (read_addl_syms): Change strcmp to strncmp and put 3rd
+	arg back.
+
+	* command.h (struct cmd_list_element): Add comment clarifying
+	purpose of abbrev_flag.
+
+Mon Aug  7 12:51:03 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* printcmd.c (_initialize_printcmd): Changed "undisplay" not to
+	have abbrev flag set; it isn't an abbreviation of "delete
+	display", it's an alias.
+
+Mon Aug  7 00:25:15 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* symtab.c (lookup_symtab_1): Remove filematch (never used).
+
+	* expread.y [type]: Add second argument to 2 calls to
+	lookup_member_type which were missing them.
+
+	* dbxread.c (symbol_file_command): Add from_tty arg.
+	Check it before calling query.
+
+	* infcmd.c (tty_command): Add from_tty arg.
+
+	* eval.c (evaluate_subexp): Remove 3rd argument from
+	calls to value_x_unop.
+
+	* dbxread.c (read_addl_syms): Remove 3rd argument from
+	call to strcmp.
+
+	* gdb.texinfo (Command editing): @include inc-readline.texinfo
+	and inc-history.texinfo and reorganize GDB-specific stuff.
+
+	* Makefile: Add line MAKE=make.
+
+	* README (second paragraph): Fix trivial errors.
+
+	* dbxread.c (read_struct_type): Make sure p is initialized.
+
+	* main.c (symbol_completion_function): Complete correctly
+	on the empty string.
+
+Sun Aug  6 21:01:59 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* symmetry-dep.c: Remove "long" from definition of i386_follow_jump.
+
+	* gdb.texinfo (Backtrace): Document "where" and "info stack".
+
+	* dbxread.c (cleanup_undefined_types): Strip off "struct "
+	or "union " from type names before doing comparison
+
+Sat Aug  5 02:05:36 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* config.gdb (i386, i386gas): Improve makefile editing instructions.
+
+	* Makefile: Fix typo in CLIBS for SYSV.
+
+	* dbxread.c (read_dbx_symtab): Deal with N_GSYM typedefs.
+
+	* dbxread.c (add_file_command): Do not free name.  We didn't
+	allocate it; it just points into arg_string.
+
+	* Makefile, m-*.h: Change LACK_VPRINTF to HAVE_VPRINTF.
+
+Fri Jul 28 00:07:48 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (val_print): Made sure that all returns returned a
+	value (usually 0, indicating no memory printed).
+
+	* core.c (read_memory): Changed "return" to "return 0".
+
+	* expread.y (parse_number): Handle scientific notation when the
+	string does not contain a '.'.
+
+Thu Jul 27 15:14:03 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* infrun.c (signals_info): Error if signal number passed is out of
+	bounds. 
+
+	* defs.h: Define alloca to be __builtin_alloca if compiling with
+	gcc and localized inclusion of alloca.h on the sparc with the
+	other alloca stuff.
+	* command.c: Doesn't need to include alloca.h on the sparc; defs.h
+	does it for you.
+
+	* printcmd.c (print_frame_args): Changed test for call to
+	print_frame_nameless_args to check i to tell if any args had been
+	printed.
+
+Thu Jul 27 04:40:56 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* blockframe.c (find_pc_partial_function): Always check that NAME
+	and/or ADDRESS are not nil before storing into them.
+
+Wed Jul 26 23:41:21 1989  Roland McGrath  (roland at hobbes.ai.mit.edu)
+
+	* m-newsos3.h: Define BROKEN_LARGE_ALLOCA.
+	* dbxread.c (symbol_file_command, psymtab_to_symtab):
+	Use xmalloc #ifdef BROKEN_LARGE_ALLOCA.
+
+Tue Jul 25 16:28:18 1989  Jay Fenlason  (hack at apple-gunkies.ai.mit.edu)
+
+	* m68k-opcode.h: moved some of the fmovem entries so they're
+	all consecutive.  This way the assembler doesn't bomb.
+
+Mon Jul 24 22:45:54 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* symtab.c (lookup_symbol): Changed error to an informational (if
+	not very comforting) message about internal problems.  This will
+	get a null symbol returned to decode_line_1, which should force
+	things to be looked up in the misc function vector.
+
+Wed Jul 19 13:47:34 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (lookup_symbol): Changed "fatal" to "error" in
+	external symbol not found in symtab in which it was supposed to be
+	found.  This can be reached because of a bug in ar.
+
+Tue Jul 18 22:57:43 1989  Randy Smith  (roland at hobbes.ai.mit.edu)
+
+	* m-news.h [REGISTER_U_ADDR]: Decreased the assumed offset of fp0
+	by 4 to bring it into (apparently) appropriate alignment with
+	reality. 
+
+Tue Jul 18 18:14:42 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* Makefile: pinsn.o should depend on opcode.h
+
+	* m68k-opcode.h: Moved fmovemx with register lists to before other
+	fmovemx. 
+
+Tue Jul 18 11:21:42 1989  Jim Kingdon  (kingdon at susie)
+
+	* Makefile, m*.h: Only #define vprintf (to _doprnt or printf,
+	depends on the system) if the library lacks it (controlled by
+	LACK_VPRINTF_DEFINE in makefile).  Unpleasant, but necessary to
+	make this work with the GNU C library.
+
+Mon Jul 17 15:17:48 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* breakpoint.c (breakpoint_1): Change addr-b->address to
+	b->address-addr.
+
+Sun Jul 16 16:23:39 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* eval.c (evaluate_subexp): Change error message printed when
+	right operand of '@' is not an integer to English.
+
+	* infcmd.c (registers_info): Fix call to print_spaces_filtered
+	to specify right # of arguments.
+
+	* gdb.texinfo (Command Editing): Document info editing command.
+
+	* coffread.c (read_file_hdr): Add MC68MAGIC.
+
+	* source.c (select_source_symtab): Change MAX to max.
+
+Fri Jul 14 21:19:11 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* infcmd.c (registers_info): Clean up display to look good with long
+	register names, to say "register" instead of "reg", and to put the
+	"relative to selected stack frame" bit at the top.
+
+Fri Jul 14 18:23:09 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (record_misc_function): Put parens around | to force
+	correct evaluation.
+
+Wed Jul 12 12:25:53 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* m-newsos3, m-news, infrun.c, Makefile, config.gdb, news-dep.c:
+	Merge in Hikichi's changes for Sony/News-OS 3 support.
+
+Tue Jul 11 21:41:32 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* utils.c (fputs_filtered): Don't do any filtering if output is
+	not to stdout, or if stdout is not a tty.
+	(fprintf_filtered): Rely on fputs_filtered's check for whether to
+	do filtering.
+
+Tue Jul 11 00:33:58 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* GDB 3.2 Released.
+
+	* valprint.h: Deleted.
+
+	* utils.c (fputs_filtered): Don't do any filtering if filtering is
+	disabled (lines_per_page == 0).
+
+Mon Jul 10 22:27:53 1989  Randy Smith  (roland at hobbes.ai.mit.edu)
+
+	* expread.y [typebase]: Added "unsigned long int" and "unsigned
+	short int" to specs.
+
+Mon Jul 10 21:44:55 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* main.c (main): Make -cd use cd_command to avoid
+	current_directory with non-absolute pathname.
+
+Mon Jul 10 00:34:29 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (symbol_file_command): Catch errors from stat (even
+	though they should never happen).
+
+	* source.c (openp): If the path is null, use the current
+	directory. 
+
+	* dbxread.c (read_dbx_symtab): Put N_SETV symbols into the misc
+	function vector ...
+	(record_misc_function): ... as data symbols.
+
+	* utils.c (fprintf_filtered): Return after printing if we aren't
+	going to do filtering.
+
+	* Makefile: Added several things for make clean to take care of.
+
+	* expread.y: Lowered "@" in precedence below +,-,*,/,%.
+
+	* eval.c (evaluate_subexp): Return an error if the rhs of "@"
+	isn't integral.
+
+	* Makefile: Added removal of core and gdb[0-9] files to clean
+	target. 
+
+	* Makefile: Made a new target "distclean", which cleans things up
+	correctly for making a distribution.
+
+Sun Jul  9 23:21:27 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* dbxread.c: Surrounded define of gnu symbols with an #ifndef
+	NO_GNU_STABS in case you don't want them on some machines.
+	* m-npl.h, m-pn.h: Defined NO_GNU_STABS.
+
+Sun Jul  9 19:25:22 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* utils.c (fputs_filtered): New function.
+	(fprintf_filtered): Use fputs_filtered.
+	utils.c (print_spaces_filtered),
+	command.c (help_cmd,help_cmd_list),
+	printcmd.c (print_frame_args),
+	stack.c (print_block_frame_locals, print_frame_arg_vars),
+	valprint.c (many functions): Use fputs_filtered instead of
+	fprintf_filtered to avoid arbitrary limit.
+
+	* utils.c (fprintf_filtered): Fix incorrect comment.
+
+Sat Jul  8 18:12:01 1989  Randy Smith  (randy at hobbes.ai.mit.edu)
+
+	* valprint.c (val_print): Changed assignment of pretty to use
+	prettyprint as a conditional rather than rely on values of the
+	enum. 
+
+	* Projects: Cleaned up a little for release.
+
+	* main.c (initialize_main): Initialize
+	rl_completion_entry_function instead of completion_entry_function. 
+
+	* Makefile: Modified to use the new readline library setup.
+
+	* breakpoint.c (break_command_1, delete_breakpoint,
+	enable_breakpoint, disable_breakpoint): Put in new printouts for
+	xgdb usage triggered off of xgdb_verbose.
+	* main.c (main): Added check for flag to set xgdb_verbose.
+	* stack.c (frame_command): Set frame_changed when frame command
+	used. 
+
+Fri Jul  7 16:20:58 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* Remove valprint.h and move contents to value.h (more logical).
+
+Fri Jul  7 02:28:06 1989  Randall Smith  (randy at rice-chex)
+
+	* m68k-pinsn.c (print_insn): Included a check for register list;
+	if there is one, make sure to start p after it.
+
+	* breakpoint.c (break_command_1, delete_breakpoint,
+	enable_breakpoint, disable_breakpoint): #ifdef'd out changes
+	below; they produce unwanted output in gdb mode in gnu-emacs.
+
+	* gdb.texinfo: Spelled.  Also removed index references from
+	command editing section; the relevance/volume ratio was too low.
+	Removed all references to the function index.
+
+	* ns32k-opcode.h, ns32k-pinsn.c: Backed out changes of June 24th;
+	haven't yet received legal papers.
+
+	* .gdbinit: Included message telling the user what it is doing.
+
+	* symmetry-dep.c: Added static decls for i386_get_frame_setup,
+	i386_follow_jump.
+	* values.c (unpack_double): Added a return (double)0 at the end to
+	silence a compiler warning.
+
+	* printcmd.c (containing_function_bounds, asdump_command): Created
+	to dump the assembly code of a function (support for xgdb and a
+	useful hack).
+	(_initialize_printcmd): Added this to command list.
+	* gdb.texinfo [Memory]: Added documentation for the asdump
+	command.
+	* breakpoint.c (break_command_1, delete_breakpoint,
+	enable_breakpoint, disable_breakpoint): Added extra verbosity for
+	xgdb conditionalized on the new external frame_full_file_name.
+	* source.c (identify_source_line): Increase verbosity of fullname
+	prointout to include pc value.
+	* stack.c: Added a new variable; "frame_changed" to indicate when
+	a frame has been changed so that gdb can print out a frame change
+	message when the frame only changes implicitly.
+	(print_frame_info): Check the new variable in determining when to
+	print out a new message and set it to zero when done.
+	(up_command): Increment it.
+	(down_command): Decrement it.
+
+	* m68k-pinsn.c (print_insn_arg [lL]): Modified cases for register
+	lists to reset the point to point to after the word from which the
+	list is grabbed *if* that would cause point to point farther than
+	it currently is.
+
+Thu Jul  6 14:28:11 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (val_print, value_print): Add parameter to control
+	prettyprinting.
+	valprint.h: New file containing constants used for passing
+	prettyprinting parameter to val{,ue}_print.
+	expprint.c, infcmd.c, printcmd.c, valprint.c, values.c:
+	Change all calls to val{,ue}_print to use new parameter.
+	
+Mon Jul  3 22:38:11 1989  Randy Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (,process_one_symbol): Moved extern declaration for
+	index out of function to beginning of file.
+
+Mon Jul  3 18:40:14 1989  Jim Kingdon  (kingdon at hobbes.ai.mit.edu)
+
+	* gdb.texinfo (Registers): Add "ps" to list of standard registers.
+
+Sun Jul  2 23:13:03 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (enable_display): Change d->next to d = d->next so
+	that "enable display" without args works.
+
+Fri Jun 30 23:42:04 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* source.c (list_command):  Made error message given when no
+	symtab is loaded clearer.
+
+	* valops.c (value_assign): Make it so that when assigning to an
+	internal variable, the type of the assignment exp is the type of
+	the value being assigned.
+
+Fri Jun 30 12:12:43 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (verbose_info): Created.
+	(initialize_main): Put "info verbose" into command list.
+
+	* utils.c (screensize_info): Created.
+	(_initialize_utils): Defined "info screensize" as a normal command.
+
+	* valprint.c (format_info): Added information about maximum number
+	of array elements to function.
+
+	* blockframe.c (find_pc_partial_function): Again.
+
+	* blockframe.c (find_pc_partial_function): Replaced a "shouldn't
+	happen" (which does) with a zero return.
+
+	* main.c (dont_repeat): Moved ahead of first use.
+
+Thu Jun 29 19:15:08 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* vax-opcode.h: Made minor modifications (moved an instruction and
+	removed a typo) to bring this into accord with gas' table; also
+	changed copyright to reflect it being part of both gdb and gas.
+
+	* m68k-opcode.h: Added whole scads and bunches of new stuff for
+	the m68851 and changed the coptyrightto recognize that the file
+	was shared between gdb and gas.
+
+	* main.c (stop_sig): Use "dont_repeat ()" instead of *line = 0;
+
+	* core.c (read_memory): Don't do anything if length is 0.
+
+	* Makefile: Added readline.c to the list of files screwed by
+	having the ansi ioctl.h compilation with gcc.
+
+	* config.gdb: Added sun4os3 & sun4-os3 as availible options.
+
+Wed Jun 28 02:01:26 1989  Jim Kingdon  (kingdon at apple-gunkies.ai.mit.edu)
+
+	* command.c (lookup_cmd): Add ignore_help_classes argument.
+	(lookup_cmd_1): Add ignore_help_classes argument.
+	command.c, main.c: Change callers of lookup_cmd{,_1} to supply
+        value for ignore_help_classes.
+
+Tue Jun 27 18:01:31 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* utils.c (print_spaces_filtered): Made more efficient.
+	* defs.h: Declaration.
+	* valprint.c (val_print): Used in a couple of new places.
+
+Mon Jun 26 18:27:28 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* m68k-pinsn.c (print_insn_arg ['#', '^']): Combined them into one
+	case which always gets the argument from the word immediately
+	following the instruction.
+	(print_insn_arg ["[lL]w"]): Make sure to always get the register
+	mask from the word immediately following the instruction.
+
+Sun Jun 25 19:14:56 1989  Randall Smith  (randy at galapas.ai.mit.edu)
+
+	* Makefile: Added hp-include back in as something to distribute.
+
+	* stack.c (print_block_frame_locals): Return value changed from
+	void to int; return 1 if values printed.  Use _filtered.
+	(print_frame_local_vars): Use return value from
+	print_block_frame_locals to mention if nothing printed; mention
+	lack of symbol table, use _filtered.
+	(print_frame_arg_vars): Tell the user if no symbol table
+	or no values printed.  Use fprintf_filtered instead of fprintf.
+	* blockframe.c (get_prev_frame_info): Check for no inferior or
+	core file before crashing.
+
+	* inflow.c (inferior_died): Set current frame to zero to keep from
+	looking like we're in start.
+
+Sat Jun 24 15:50:53 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* stack.c (frame_command): Added a check to make sure that there
+	was an inferior or a core file.
+
+	* expread.y (yylex): Allow floating point numbers of the form ".5"
+	to be parsed.
+
+        Changes by David Taylor at TMC:
+	* ns32k-pinsn.c: Added define for ?floating point coprocessor? and
+	tables for register names to be used for each of the possibilities.
+	(list_search): Created; searches a list of options for a specific
+	value.
+	(print_insn_arg): Added 'Q', 'b', 'M', 'P', 'g', and 'G' options
+	to the value location switch.
+	* ns32k-opcode.h: Added several new location flags.
+	[addr, enter, exit, ext[bwd], exts[bwd], lmr, lpr[bwd], restore,
+	rett, spr[bwd], smr]: Improved insn format output.
+
+	* symtab.c (list_symbols): Rearrange printing to produce readable
+	output for "info types".
+
+	* eval.c (evaluate_subexp_for_address): Fixed typo.
+
+	* dbxread.c (read_type): Don't output an error message when
+	there isn't a ',' after a cross-reference.
+
+	* dbxread.c (read_dbx_symtab): #if'd out N_FN case in
+	read_dbx_symtab if it has the EXT bit set (otherwise multiple
+	cases with the same value).
+
+Fri Jun 23 13:12:08 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* symmisc.c: Changed decl of print_spaces from static to extern
+	(since it's defined in utils.c).
+
+	* remote.c (remote_open): Close remote_desc if it's already been
+	opened. 
+
+	* Remote_Makefile, remote_gutils.c, remote_inflow.c,
+	remote_server.c, remote_utils.c: Combined into remote-multi.shar.
+	* remote-multi.shar: Created (Vikram Koka's remote stub).
+	* remote-sa.m68k.shar: Created (Glenn Engel's remcom.c).
+	* README: Updated to reflect new organization of remote stubs.
+
+	* dbxread.c (read_dbx_symtab): Put an N_FN in with N_FN | N_EXT to
+	account for those machines which don't use the external bit here.
+	Sigh. 
+
+	* m-symmetry.h: Defined NO_SIGINTERRUPT.
+
+Thu Jun 22 12:51:37 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (decode_format): Make sure characters are printed
+	using a byte size.
+
+	* utils.c (error): Added a terminal_ours here.
+
+	* stack.c (locals_info): Added check for selected frame.
+
+	* dbxread.c (read_type): Checked to make sure that a "," was
+	actually found in the symbol to end a cross reference.
+
+Wed Jun 21 10:30:01 1989  Randy Smith  (randy at tartarus.uchicago.edu)
+
+	* expread.y (parse_number, [exp]): Allowed for the return of a
+	number marked as unsigned; this will allow inclusion of unsigned
+	constants. 
+
+	* symtab.h: Put in default definitions for BUILTIN_TYPE_LONGEST
+	and BUILTIN_TYPE_UNSIGNED_LONGEST.
+
+	* expread.y (parse_number): Will now accept integers suffixed with
+	a 'u' (though does nothing special with it).
+
+	* valarith.c (value_binop): Added cases to deal with unsigned
+	arithmetic correctly.
+
+Tue Jun 20 14:25:54 1989  Randy Smith  (randy at tartarus.uchicago.edu)
+
+	* dbxread.c (psymtab_to_symtab_1): Changed reading in info message
+	to go through printf_filtered.
+
+	* symtab.c (list_symbols): Placed header message after all calls
+	to psymtab_to_symtab. 
+
+	* symtab.c (smash_to_{function, reference, pointer}_type): Carried
+	attribute of permanence for the type being smashed over the bzero
+	and allowed any type to point at this one if it is permanent.
+
+	* symtab.c (smash_to_{function, reference, pointer}_type): Fix
+	typo: check flags of to_type instead of type.
+
+	* m-hp9k320.h: Changed check on __GNU__ predefine to __GNUC__.
+
+	* Makefile: Made MUNCH_DEFINE seperate and based on SYSV_DEFINE;
+	they aren't the same on hp's.
+
+Mon Jun 19 17:10:16 1989  Randy Smith  (randy at tartarus.uchicago.edu)
+
+	* Makefile: Fixed typo.
+
+	* valops.c (call_function): Error if the inferior has not been
+	started. 
+
+	* ns32k-opcode.h [check[wc], cmpm[bwd], movm[bwd], skpsb]: Fixed
+	typos. 
+
+Fri Jun  9 16:23:04 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-news.h [NO_SIGINTERRUPT]: Defined.
+
+	* dbxread.c (read_type): Start copy of undefined structure name
+	past [sue] defining type of cross ref.
+
+	* dbxread.c (process_one_symbol): Changed strchr to index.
+
+	* ns32k-opcode.h, ns32k-pinsn.c: More changes to number of
+	operands, addition of all of the set condition opcodes, addition
+	of several flag letters, all patterned after the gas code.
+
+	* ns32k-opcode.h [mov{su,us}[bwd], or[bwd]]: Changed number of
+	operands from 1 to 2.
+
+Wed Jun  7 15:04:24 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symseg.h [TYPE_FLAG_STUB]: Created.
+	* dbxread.c (read_type): Set flag bit if type is stub.
+	(cleanup_undefined_types): Don't mark it as a stub if it's been
+	defined since we first learned about it.
+	* valprint.c (val_print): Print out a message to that effect if
+	this type is encountered.
+
+	* symseg.h, symtab.h: Moved the definition of TYPE_FLAG_PERM over
+	to symseg.h so that all such definitions would be in the same place.
+
+	* valprint.c (val_print): Print out <No data fields> for a
+	structure if there aren't any.
+
+	* dbxread.c (read_type): Set type name of a cross reference type
+	to "struct whatever" or something.
+
+Tue Jun  6 19:40:52 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* breakpoint.c (breakpoint_1): Print out symbolic location of
+	breakpoints for which there are no debugging symbols.
+
+Mon Jun  5 15:14:51 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* command.c (help_cmd_list): Made line_size static.
+
+Sat Jun  3 17:33:45 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Makefile: Don't include the binutils hp-include directory in the
+	distribution anymore; refer the users to the binutils distribution.
+
+Thu Jun  1 16:33:07 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (disable_display_command): Fixed loop iteration for
+	no arg case.
+
+	* printcmd.c (disable_display_command): Added from_tty parameter
+	to function.
+
+	* valops.c (value_of_variable): Call read_var_value with 0 cast to
+	FRAME instead of CORE_ADDR.
+
+	* eval.c (evaluate_subexp): Corrected number of args passed to
+	value_subscript (to 2).
+
+	* infrun.c (wait_for_inferior), symtab.c (decode_line_1),
+	m-convex.h: Changed name of FIRSTLINE_DEBUG_BROKEN to
+	PROLOGUE_FIRSTLINE_OVERLAP. 
+
+	* m-merlin.h: Fixed typo.
+	* ns32k-opcode.h: Added ns32381 opcodes and "cinv" insn, and fixed
+	errors in movm[wd], rett, and sfsr.
+
+	* eval.c (evaluate_subexp, evaluate_subexp_for_address), valops.c
+	(value_zero): Change value_zero over to taking two arguments
+	instead of three.
+
+	* eval.c (evaluate_subexp)
+	  [OP_VAR_VALUE]: Get correct lval type for AVOID_SIDE_EFFECTS for
+	  all types of symbols.
+	  [BINOP_DIV]: Don't divide if avoiding side effects; just return
+	  an object of the correct type.
+	  [BINOP_REPEAT]: Don't call value_repeat, just allocate a
+	  repeated value.
+	(evaluete_subexp_for_address) [OP_VAR_VALUE]: Just return a thing
+	of the right type (after checking to make sure that we are allowed
+	to take the address of whatever variable has been passed).
+
+Mon May 29 11:01:02 1989  Randall Smith  (randy at galapas.ai.mit.edu)
+
+	* breakpoint.c (until_break_command): Set the breakpoint with a
+	frame specification so that it won't trip in inferior calls to the
+	function.  Also set things up so that it works based on selected
+	frame, not current one.
+
+Sun May 28 15:05:33 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* eval.c (evalue_subexp): Change subscript case to use value_zero
+	in EVAL_AVOID_SIDE_EFFECTS case.
+
+Fri May 26 12:03:56 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_addl_syms, psymtab_to_symtab): Removed
+	cleanup_undefined_types; this needs to be done on a symtab basis.
+	(end_symtab): Called cleanup_undefined_types from here.
+	(cleanup_undefined_types): No longer uses lookup_symbol (brain
+	dead idea; oh, well), now it searches through file_symbols.
+
+Wed May 24 15:52:43 1989  Randall Smith  (randy at galapas)
+
+	* source.c (select_source_symtab): Only run through
+	partial_symtab_list if it exists.
+
+	* coffread.c (read_coff_symtab): Don't unrecord a misc function
+	when a function symbol is seen for it.
+
+	* expread.y [variable]: Make sure to write a type for memvals if
+	you don't get a mft you recognize.
+
+Tue May 23 12:15:57 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* dbxread.c (read_ofile_symtab, psymtab_to_symtab): Moved cleanup
+	of undefined types to psymtab_to_symtab.  That way it will be
+	called once for all readins (which will, among other things,
+	help reduce infinite loops).
+
+	* symtab.h [misc_function_type]: Forced mf_unknown to 0.
+	* dbxread.c (record_misc_function): Cast enum to unsigned char (to
+	fit).
+	* expread.y [variable]: Cast unsigned char back to enum to test.
+
+Mon May 22 13:08:25 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+        Patches by John Gilmore for dealing well with floating point:
+	* findvar.c (value_from_register, locate_var_value): Used
+	BYTES_BIG_ENDIAN instead of an inline test.
+	* m-sparc.h [IEEE_FLOAT]: Created to indicate that the sparc is
+	IEEE compatible.
+	* printcmd.c (print_scalar_formatted): Use BYTES_BIG_ENDIAN and
+	the stream argument for printing; also modify default type for
+	'f'.  Change handling of invalid floats; changed call syntax for
+	is_nan.
+	(print_command): Don't print out anything indicating that
+	something was recorded on the history list if it wasn't.
+	* valprint.c (val_print): Fixed to deal properley with new format
+	of is_nan and unpacking doubles without errors occuring.
+	(is_nan): Changed argument list and how it figures big endianness
+	(uses macros).
+	* values.c (record_latest_value): Return -1 and don't record if
+	it's an invalid float.
+	(value_as_double): Changed to use new unpack_double calling
+	convention.
+	(unpack_double): Changed not to call error if the float was
+	invalid; simply to set invp and return.  Changed calling syntax.
+	(unpack_field_as_long, modify_field): Changed to use
+	BITS_BIG_ENDIAN to determine correct action.
+
+	* m-hp9k320.h [HP_OS_BUG]: Created; deals with problem where a
+	trap happens after a continue.
+	* infrun.c (wait_for_inferior): Used.
+
+	* m-convex.h [FIRSTLINE_DEBUG_BROKEN]: Defined a flag to indicate
+	that the debugging symbols output by the compiler for the first
+	line of a function were broken.
+	* infrun.c (wait_for_inferior), symtab.c (decode_line_1): Used.
+	
+	* gdb.texinfo [Data, Memory]: Minor cleanups of phrasing.
+
+Fri May 19 00:16:59 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (add_undefined_type, cleanup_undefined_types): Created
+	to keep a list of cross references to as yet undefined types.
+	(read_type): Call add_undefined_type when we run into such a case.
+	(read_addl_syms, read_ofile_symtab): Call cleanup_undefined_types
+	when we're done.
+
+	* dbxread.c (psymtab_to_symtab, psymtab_to_symtab_1): Broke
+	psymtab_to_symtab out into two routines; made sure the string
+	table was only readin once and the globals were only scanned once,
+	for any number of dependencies.
+
+Thu May 18 19:59:18 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-*.h: Defined (or not, as appropriate per machine)
+	BITS_BIG_ENDIAN, BYTES_BIG_ENDIAN, and WORDS_BIG_ENDIAN.
+
+Wed May 17 13:37:45 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (symbol_completion_function): Always complete on result
+	command list, even if exact match found.  If it's really an exact
+	match, it'll find it again; if there's something longer than it,
+	it'll get the right result.
+
+	* symtab.c (make_symbol_completion_function): Fixed typo; strcmp
+	==> strncmp.
+
+	* dbxread.c (read_dbx_symtab): Change 'G' case to mark symbols as
+	LOC_EXTERNAL. 
+
+	* expread.y [variables]: Changed default type of text symbols to
+	function returning int so that one can use, eg. strcmp.
+
+	* infrun.c (wait_for_inferior): Include a special flag indicating
+	that one shouldn't insert the breakpoints on the next step for
+	returning from a sigtramp and forcing at least one move forward. 
+
+	* infrun.c (wait_for_inferior): Change test for nexting into a
+	function to check for current stack pointer inner than previous
+	stack pointer.
+
+	* infrun.c (wait_for_inferior): Check for step resume break
+	address before dealing with normal breakpoints.
+
+	* infrun.c (wait_for_inferior): Added a case to deal with taking
+	and passing along a signal when single stepping past breakpoints
+	before inserting breakpoints.
+
+	* infrun.c (wait_for_inferior): Inserted special case to keep
+	going after taking a signal we are supposed to be taking.  
+
+Tue May 16 12:49:55 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* inflow.c (terminal_ours_1): Cast result of signal to (int
+	(*)()). 
+
+	* gdb.texinfo: Made sure that references to the program were in
+	upper case.  Modify description of the "set prompt" command.
+	[Running]: Cleaned up introduction.
+	[Attach]: Cleaned up.
+	[Stepping]: Change "Proceed" to "Continue running" or "Execute".
+	Minor cleanup.
+	[Source Path]: Cleaned up intro.  Cleared up distinction between
+	the executable search path and the source path.  Restated effect
+	of the "directory" command with no arguments.
+	[Data]: Fixed typos and trivial details.
+	[Stepping]: Fixed up explanation of "until".
+
+	* source.c (print_source_lines): Print through filter.
+
+	* printcmd.c (x_command): If the format with which to print is
+	"i", use the address of anything that isn't a pointer instead of
+	the value.  This is for, eg. "x/10i main".
+
+	* gdb.texinfo: Updated last modification date on manual.
+
+Mon May 15 12:11:33 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (lookup_symtab): Fixed typo (name ==> copy) in call to
+	lookup_symtab_1. 
+
+	* gdb.texinfo: Added documentation for "break [+-]n" and for new
+	actions of "directory" command (taking multiple directory names at
+	the same time).
+
+	* m68k-opcode.h: Replaced the version in gdb with an up-to-date
+	version from the assembler directory.
+	* m68k-pinsn.c (print_insn_arg): Added cases 'l' & 'L' to switch
+	to print register lists for movem instructions.
+
+	* dbxread.c, m-convex.h: Moved convex dependent include files over
+	from dbxread.c to m-convex.h.
+
+	* printcmd.c (disable_display, disable_display_command): Changed
+	name of first to second, and created first which takes an int as
+	arg rather than a char pointer.  Changed second to use first.
+	(_initialize_printcmd): Changed to use second as command to call.
+	(delete_current_display, disable_current_display): Changed name of
+	first to second, and changed functionality to match.
+	* infrun.c (normal_stop), main.c (return_to_top_level): Changed to 
+	call disable_current_display.
+
+	* dbxread.c (process_one_symbol, read_dbx_symtab): Changed N_FN to
+	be N_FN | N_EXT to deal with new Berkeley define; this works with
+	either the old or the new.
+
+	* Remote_Makefile, remote_gutils.c, remote_inflow.c,
+	remote_server.c, remote_utils.c: Created.
+	* Makefile: Included in tag and tar files.
+	* README: Included a note about them.
+
+	* printcmd.c (print_address): Use find_pc_partial_function to
+	remove need to readin symtabs for symbolic addresses.  
+
+	* source.c (directory_command): Replaced function with new one
+	that can accept lists of directories seperated by spaces or :'s.
+
+	* inflow.c (new_tty): Replaced calls to dup2 with calls to dup.
+
+Sun May 14 12:33:16 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* stack.c (args_info): Make sure that you have an inferior or core
+	file before taking action.
+
+	* ns32k-opcode.h [deiw, deid]: Fixed machine code values for these
+	opcodes.
+
+	* dbxread.c (scan_file_globals): Modified to use misc function
+	vector instead of file itself.  Killed all arguments to the
+	funciton; no longer needed.
+	(psymtab_to_symtab): Changed call for above to reflect new (void)
+	argument list.
+
+	* dbxread.c (read_dbx_symtab, ): Moved HASH_OFFSET define out of
+	read_dbx_symtab. 
+
+	* expread.y [variable]: Changed default type of misc function in
+	text space to be (void ()).
+
+	* Makefile: Modified for proper number of s/r conflicts (order is
+	confusing; the mod that necessitated this change was on May 12th,
+	not today). 
+
+	* expread.y (yylex): Added SIGNED, LONG, SHORT, and INT keywords.
+	[typename]: Created.
+	[typebase]: Added rules for LONG, LONG INT, SHORT, SHORT INT,
+	SIGNED name, and UNSIGNED name (a good approximation of ansi
+	standard). 	
+
+	* Makefile: Included .c.o rule to avoid sun's make from throwing
+	any curves at us.
+
+	* blockframe.c: Included <obstack.h>
+
+	* command.c (lookup_cmd): Clear out trailing whitespace.
+
+	* command.c (lookup_cmd_1): Changed malloc to alloca.  
+	
+Fri May 12 12:13:12 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): Only print nameless args when you
+	know how many args there are supposed to be and when you've
+	printed fewer than them.  Don't print nameless args between
+	printed args.
+
+	* symtab.c (make_symbol_completion_function): Fixed typo (= ==>
+	==). 
+
+	* remote.c (remote_open): ifdef'd out siginterrupt call by #ifndef
+	NO_SIGINTERRUPT.
+	* m-umax.h: Defined NO_SIGINTERRUPT.
+
+	* expread.y [ptype, array_mod, func_mod, direct_abs_decl,
+	abs_decl]:  Added rules for parsing and creating arbitrarily
+	strange types for casts and sizeofs.
+
+	* symtab.c, symtab.h (create_array_type): Created.  Some minor
+	misfeatures; see comments for details (main one being that you
+	might end up creating two arrays when you only needed one).
+
+Thu May 11 13:11:49 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* valops.c (value_zero): Add an argument for type of lval.
+	* eval.c (evaluate_subexp_for_address): Take address properly in
+	the avoid side affects case (ie. keep track of whether we have an
+	lval in memory and we can take the address).
+	(evaluate_subexp): Set the lval type of expressions created with
+	value_zero properley.
+
+	* valops.c, value.h (value_zero): Created--will return a value of
+	any type with contents filled with zero.
+	* symtab.c, symtab.h (lookup_struct_elt_type): Created.
+	* eval.c (evaluate_subexp): Modified to not read memory when
+	called with EVAL_AVOID_SIDE_EFFECTS.
+
+	* Makefile: Moved dbxread.c ahead of coffread.c in the list of
+	source files. 
+
+Wed May 10 11:29:19 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* munch: Make sure that sysv version substitutes for the whole
+	line. 
+
+	* symtab.h: Created an enum misc_function_type to hold the type of
+	the misc function being recorded.
+	* dbxread.c (record_misc_function): Branched on dbx symbols to
+	decide which type to assign to a misc function.
+	* coffread.c (record_misc_function): Always assign type unknown.
+	* expread.y [variable]: Now tests based on new values.
+
+Tue May  9 13:03:54 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c: Changed inclusion of <strings.h> (doesn't work on
+	SYSV) to declaration of index.
+
+	* Makefile: Changed last couple of READLINE_FLAGS SYSV_DEFINE
+
+	* source.c ({forward, reverse}_search_command): Made a default
+	search file similar to for the list command.
+
+Mon May  8 18:07:51 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): If we don't know how many
+	arguments there are to this function, don't print the nameless
+	arguments.  We don't know enough to find them.
+
+	* printcmd.c (print_frame_args): Call print_frame_nameless_args
+	with proper arguments (start & end as offsets from addr).
+
+	* dbxread.c (read_addl_syms): Removed cases to deal with global
+	symbols; this should all be done in scan_global_symbols.
+
+Sun May  7 11:36:23 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Makefile: Added copying.awk to ${OTHERS}.
+
+Fri May  5 16:49:01 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (type_print_varspec_prefix): Don't pass
+	passed_a_pointer onto children.
+
+	* valprint.c (type_print_varspec_suffix): Print "array of" with
+	whatever the "of" is after tha array brackets.
+
+	* valprint.c (type_print_varspec_{prefix,suffix}): Arrange to
+	parenthesisze pointers to arrays as well as pointers to other
+	objects. 
+
+	* valprint.c (type_print_varspec_suffix): Make sure to print
+	subscripts of multi-dimensional arrays in the right order.
+
+	* infcmd.c (run_command): Fixed improper usages of variables
+	within remote debugging branch.
+
+	* Makefile: Added Convex.notes to the list of extra files to carry
+	around. 
+
+	* dbxread.c (symbol_file_command): Made use of alloca or malloc
+	dependent on macro define.
+
+Thu May  4 15:47:04 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Makefile: Changed READLINE_FLAGS to SYSV_DEFINE and called munch
+	with it also.
+	* munch: Check first argument for -DSYSV and be looser about
+	picking up init routines if you find it.
+
+	* coffread.c: Made fclose be of type int.
+
+	* breakpoint.c (_initialize_breakpoint): Put "unset" into class
+	alias. 
+
+Wed May  3 14:09:12 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h [STACK_END_ADDR]: Parameterized off of
+	machine/vmparam.h (as per John Gilmore's suggestion).
+
+	* blockframe.c (get_prev_frame_info): Changed this function back
+	to checking frameless invocation first before checking frame
+	chain.  This means that a backtrace up from start will produce the
+	wrong value, but that a backtrace from a frameless function called
+	in main will show up correctly.
+
+	* breakpoint.c (_initialize_breakpoint): Added entry in help for
+	delete that indicates that unset is an alias for it.
+
+	* main.c (symbol_completion_function): Modified recognition of
+	being within a single command.
+
+Tue May  2 15:13:45 1989  Randy Smith  (randy at gnu)
+
+	* expread.y [variable]: Add some parens to get checking of the
+	misc function vector right.
+
+Mon May  1 13:07:03 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* default-dep.c (core_file_command): Made reg_offset unsigned.
+
+	* default-dep.c (core_file_command): Improved error messages for
+	reading in registers.
+
+	* expread.y: Allowed a BLOCKNAME to be ok for a variable name (as
+	per C syntax). 
+
+	* dbxread.c (psymtab_to_symtab): Flushed stdout after printing
+	starting message about reading in symbols.
+
+	* printcmd.c (print_frame_args): Switched starting place for
+	printing of frameless args to be sizeof int above last real arg
+	printed. 
+
+	* printcmd.c (print_frame_args): Modified final call to
+	print_nameless_args to not use frame slots used array if none had
+	been used. 
+
+	* infrun.c (wait_for_inferior):  Take FUNCTION_START_OFFSET into
+	account when dealing with comparison of pc values to function
+	addresses. 
+
+	* Makefile: Added note about compiling gdb on a Vax running 4.3.
+
+Sun Apr 30 12:59:46 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* command.c (lookup_cmd): Got correct error message on bad
+	command.  
+
+	* m-sun3.h [ABOUT_TO_RETURN]: Modified to allow any of the return
+	instructions, including trapv and return from interupt.
+
+	* command.c (lookup_cmd): If a command is found, use it's values
+	for error reporting and determination of needed subcommands.
+
+	* command.c (lookup_cmd): Use null string for error if cmdtype is
+	null; pass *line to error instead of **.
+
+	* command.c (lookup_cmd_1): End of command marked by anything but
+	alpha numeric or '-'.  Included ctype.h.
+
+Fri Apr 28 18:30:49 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* source.c (select_source_symtab): Kept line number from ever
+	being less than 1 in main decode.
+
+Wed Apr 26 13:03:20 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* default-dep.c (core_file_command): Fixed typo.
+
+	* utils.c (fprintf_filtered): Don't use return value from
+	numchars. 
+
+	* main.c, command.c (complete_on_cmdlist): Moved function to
+	command.c. 
+
+	* command.c (lookup_cmd): Modified to use my new routine.  Old
+	version is still there, ifdef'd out.
+
+	* command.c, command.h (lookup_cmd_1): Added a routine to do all
+	of the work of lookup_cmd with no error reporting and full return
+	of information garnered in search.
+
+Tue Apr 25 12:37:54 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* breakpoint.c (_initialize_breakpoint): Change "delete
+	breakpionts" to be in class alias and not have the abbrev flag
+	set. 
+
+	* main.c (symbol_completion_function): Fix to correctly complete
+	things that correspond to multiword aliases.
+
+	* main.c (complete_on_cmdlist): Don't complete on something if it
+	isn't a command or prefix (ie. if it's just a help topic).
+
+	* main.c (symbol_completion_function): Set list index to be 0 if
+	creating a list with just one element.
+
+	* main.c (complete_on_cmdlist): Don't allow things with
+	abbrev_flag set to be completion values.
+	(symbol_completion_function): Don't accept an exact match if the
+	abbrev flag is set.
+
+	* dbxread.c (read_type): Fixed typo in comparision to check if
+	type number existed.
+
+	* dbxread.c (read_type): Made sure to only call dbx_lookup_type on
+	typenums if typenums were not -1.
+
+Mon Apr 24 17:52:12 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c: Added strings.h as an include file.
+
+Fri Apr 21 15:28:38 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (lookup_partial_symtab): Changed to only return a match
+	if the name match is exact (which is what I want in all cases in
+	which this is currently used.
+
+Thu Apr 20 11:12:34 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* m-isi.h [REGISTER_U_ADDR]: Installed new version from net.
+	* default-dep.c: Deleted inclusion of fcntl.h; apparently not
+	necessary.
+	* Makefile: Added comment about compiling on isi under 4.3.
+
+	* breakpoint.c (break_command_1): Only give decode_line_1 the
+	default_breakpoint_defaults if there's nothing better (ie. make
+	the default be off of the current_source notes if at all
+	possible). 
+
+	* blockframe.c (get_prev_frame_info): Clean up comments and
+	delete code ifdefed out around FRAMELESS_FUNCTION_INVOCATION test. 
+
+	* remote.c: Added a "?" message to protocol.
+	(remote_open): Used at startup.
+	(putpkt): Read whatever garbage comes over the line until we see a
+	'+' (ie. don't treat garbage as a timeout).
+
+	* valops.c (call_function): Eliminated no longer appropriate
+	comment.
+
+	* infrun.c (wait_for_inferior): Changed several convex conditional
+	compilations to be conditional on CANNOT_EXECUTE_STACK.
+
+Wed Apr 19 10:18:17 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): Added code to attempt to deal
+	with arguments that are bigger than an int.
+
+	Continuation of Convex/Fortran changes:
+	* printcmd.c (print_scalar_formatted): Added leading zeros to
+	printing of large integers.
+	(address_info, print_frame_args): Added code to deal with
+	LOC_REF_ARG.
+	(print_nameless_args): Allow param file to specify a routine with
+	which to print typeless integers.
+	(printf_command): Deal with long long values well.
+	* stack.c (print_frame_arg_vars): Change to deal with LOC_REF_ARG.
+	* symmisc.c (print_symbol): Change to deal with LOC_REF_ARG.
+	* symseg.h: Added LOC_REF_ARG to enum address_class.
+	* symtab.c (lookup_block_symbol): Changed to deal with
+	LOC_REF_ARG.
+	* valarith.c (value_subscripted_rvalue): Created.
+	(value_subscript): Used above when app.
+	(value_less, value_equal): Change to cast to (char *) before doing
+	comparison, for machines where that casting does something.
+	* valops.c (call_function): Setup to deal with machines where you
+	cannot execute code on the stack segment.
+	* valprint.c (val_print): Make sure that array element size isn't
+	zero before printing.  Set address of default array to address of
+	first element.  Put in a couple of int cast.  Removed some convex
+	specific code. Added check for endianness of machine in case of a
+	packed structure.  Added code for printing typeless integers and
+	for LONG LONG's.
+	(set_maximum_command): Change to use parse_and_eval_address to get
+	argument (so can use expressions there).
+	* values.c (value_of_internalvar, set_internalvar_component,
+	set_internalvar, convenience_info): Add in hooks for trapped
+	internal vars.
+	(unpack_long): Deal with LONG_LONG.
+	(value_field): Remove LONGEST cast.
+	(using_struct_return): Fixed typo ENUM ==> UNION.
+	* xgdb.c (_initialize_xgdb): Make sure that specify_exec_file_hook
+	is not called unless we are setting up a windowing environ.
+
+Tue Apr 18 13:43:37 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	Various changes involved in 1) getting gdb to work on the convex,
+	and 2) Getting gdb to work with fortran (due to convex!csmith):
+	* convex-dep.c, convex-opcode.h, m-convex.h, convex-pinsn.c:
+	Created (or replaced with new files).
+	* Makefile: Add convex dependent files.  Changed default flags to
+	gnu malloc to be CFLAGS.
+	* config.gdb: Added convex to list of machines.
+	* core.c (files_info): Added a FILES_INFO_HOOK to be used if
+	defined.
+	(xfer_core_file): Conditionalized compilation of xfer_core_file on
+	the macro XFER_CORE_FILE.
+	* coffread.c (record_misc_function): Made sure it zerod type field
+	(which is now being used; see next).
+	* dbxread.c: Included some convex dependent include files.
+	(copy_pending, fix_common_blocks): Created.
+	[STAB_REG_REGNUM, BELIEVE_PCC_PROMOTION]: Created default values;
+	may be overridden in m-*.h.
+	Included data structures for keeping track of common blocks.
+	(dbx_alloc_type): Modified; if called with negative 1's will
+	create a type without putting it into the type vector.
+	(read_dbx_symtab, read_addl_syms): Modified calls to
+	record_misc_function to include the new information.
+	(symbol_file_command, psymtab_to_symtab, add_file_command):
+	Modified reading in of string table to adapt to machines which
+	*don't* store the size of the string table in the first four bytes
+	of the string table.
+	(read_dbx_symtab, scan_file_globals, read_ofile_symtab,
+	read_addl_syms): Modified assignment of namestring to accept null
+	index into symtab as ok.
+	(read_addl_syms): Modified readin of a new object file to fiddle
+	with common blocks correctly.
+	(process_one_symbol): Fixed incorrect comment about convex.  Get
+	symbols local to a lexical context from correct spot on a per
+	machine basis.  Catch a bug in pcc which occaisionally puts an SO
+	where there should be an SOL.  Seperate sections for N_BCOMM &
+	N_ECOMM.
+	(define_symbol): Ignore symbols with no ":".  Use
+	STAB_REG_TO_REGNUM.  Added support for function args calling by
+	reference.
+	(read_type): Only read type number if one is there.  Remove old
+	(#if 0'd out) array code.
+	(read_array_type): Added code for dealing with adjustable (by
+	parameter) arrays half-heartedly.
+	(read_enum_type): Allow a ',' to end a list of values.
+	(read_range_type): Added code to check for long long.
+	* expread.y: Modified to use LONGEST instead of long where
+	necessary.  Modified to use a default type of int for objects that
+	weren't in text space.
+	* findvar.c (locate_var_value, read_var_value): Modified to deal
+	with args passed by reference.
+	* inflow.c (create_inferior): Used CREATE_INFERIOR_HOOK if it
+	exists.
+	* infrun.c (attach_program): Run terminal inferior when attaching.
+	(wait_for_inferior): Removed several convex dependencies.
+	* main.c (float_handler): Created.
+	Made whatever signal indicates a stop configurable (via macro
+	STOP_SIGNAL).
+	(main): Setup use of above as a signal handler.  Added check for
+	"-nw" in args already processed.
+	(command_line_input): SIGTSTP ==>STOP_SIGNAL.
+
+	* expread.y: Added token BLOCKNAME to remove reduce/reduce
+	conflict.
+	* Makefile: Change message to reflect new grammar.
+
+Mon Apr 17 13:24:59 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* printcmd.c (compare_ints): Created.
+	(print_frame_args): Modified to always print arguments in the
+	order in which they were found in the symbol table.  Figure out
+	what apots are missing on the fly.
+
+	* stack.c (up_command): Error if no inferior or core file.
+
+	* m-i386.h, m-symmetry.h [FRAMELESS_FUNCTION_INVOCATION]: Created;
+	same as m68k.
+
+	* dbxread.c (define_symbol): Changed "desc==0" test to
+	"processing_gcc_compilation", which is the correct way to do it.
+
+Sat Apr 15 17:18:38 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* expread.y: Added precedence rules for arglists, ?:, and sizeof
+	to eliminate some shift-reduce conflicts.
+	* Makefile: Modified "Expect" message to conform to new results.
+
+Thu Apr 13 12:29:26 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* inflow.c (terminal_init_inferior): Fixed typo in recent diff
+	installation; TIOGETC ==> TIOCGETC.
+
+	* m-vax.h, m-sun2.h, m-sun3.h, m-sparc.h, m-hp*.h, m-isi.h,
+	m-news.h [FRAMELESS_FUNCTION_INVOCATION]: Created macro with
+	appropriate definition.
+
+Wed Apr 12 15:30:29 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* blockframe.c (get_prev_frame_info): Added in a macro to specify
+	when a "frame" is called without a frame pointer being setup.
+
+	* Makefile [clean]: Made sure to delete gnu malloc if it was being
+	used. 
+
+Mon Apr 10 12:43:49 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (process_one_symbol): Reset within_function to 0 after
+	last RBRAC of a function.
+
+	* dbxread.c (read_struct_type): Changed check for filling in of
+	TYPE_MAIN_VARIANT of type.
+
+	* inflow.c (create_inferior): Conditionalized fork so that it
+	would be used if USG was defined and HAVE_VFORK was not defined.
+
+	* defs.h: Added comment about enum command_class element
+	class_alias. 
+
+	* dbxread.c (process_one_symbol): Fixed a typo with interesting
+	implications for associative processing in the brain (':' ==> 'c').
+
+	* sparc-dep.c (isabranch): Changed name to isannulled, modified to
+	deal with coprocessor branches, and improved comment.
+	(single_step): Changed to trap at npc + 4 instead of pc +8 on
+	annulled branches.  Changed name in call to isabranch as above.
+
+	* m-sun4os4.h (STACK_END_ADDRESS): Changed it to 0xf8000000 under
+	os 4.0.
+
+Sat Apr  8 17:04:07 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (process_one_symbol): In the case N_FUN or N_FNAME the
+	value being refered to is sometimes just a text segment variable.
+	Catch this case.
+
+	* infrun.c (wait_for_inferior), breakpoint.c
+	(breakpoint_stop_status): Move the selection of the frame to
+	inside breakpoint_stop_status so that the frame only gets selected
+	(and the symbols potentially read in) if the symbols are needed.
+
+	* symtab.c (find_pc_psymbol): Fixed minor misthough (pc >=
+	fucntion start, not >).
+
+	* breakpoint.c (_initialize_breakpoint): Change "delete" internal
+	help entry to simply refer to it being a prefix command (since the
+	list of subcommands is right there on a "help delete").
+
+Fri Apr  7 15:22:18 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* blockframe.c (find_pc_partial_function): Created; figures out
+	what function pc is in (name and address) without reading in any
+	new symbols.
+	* symtab.h: Added decl for above.
+	* infrun.c (wait_for_inferior): Used instead of
+	find_pc_function_start.
+	* stack.c (print_frame_info): Used instead of hand coding for same
+	thing. 
+
+	* dbxread.c (psymtab_to_symtab): No longer patch readin pst's out
+	of the partial_symtab_list; need them there for some checks.
+	* blockframe.c (block_for_pc), source.c (select_source_symtab),
+	symtab.c (lookup_symbol, find_pc_symtab, list_symbols): Made extra
+	sure not to call psymtab_to_symtab with ->readin == 1, since these
+	psymtab now stay on the list.
+	* symtab.c (sources_info): Now distinguishes between psymtabs with
+	readin set and those with it not set.
+
+	* symtab.c (lookup_symtab): Added check through partial symtabs
+	for name with .c appended.
+
+	* source.c (select_source_symtab): Changed semantics a little so
+	that the argument means something.
+	* source.c (list_command), symtab.c (decode_line_1): Changed call
+	to select_source_symtab to match new conventions.
+
+	* dbxread.c (add_file_command): This command no longer selects a
+	symbol table to list from.
+
+	* infrun.c (wait_for_inferior): Only call find_pc_function (to
+	find out if we have debugging symbols for a function and hence if
+	we should step over or into it) if we are doing a "step".
+
+Thu Apr  6 12:42:28 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (command_line_input): Added a local buffer and only
+	copied information into the global main.c buffer when it is
+	appropriate for it to be saved (and repeated).
+	(dont_repeat): Only nail line when we are reading from stdin
+	(otherwise null lines won't repeat and what's in line needs to be
+	saved).
+	(read_command_lines): Fixed typo; you don't what to repeat when
+	reading command lines from the input stream unless it's standard
+	input. 
+
+        John Gilmore's (gnu@toad.com) mods for USG gdb:
+	* inflow.c: Removed inclusion of sys/user.h; no longer necessary.
+	(, terminal_init_inferior, terminal_inferior, terminal_ours_1,
+	term_status_command, _initialize_inflow) Seperated out declaration
+	and usage of terminal mode structures based on the existence of
+	the individual ioctls.
+	* utils.c (request_quit): Restore signal handler under USG.  If
+	running under USG initialize sys_siglist at run time (too much
+	variation between systems).
+
+Wed Apr  5 13:47:24 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+        John Gilmore's (gnu@toad.com) mods for USG gdb:
+	* default-dep.c: Moved include of sys/user.h to after include of
+	a.out.h.
+	(store_inferior_registers): Fixed error message.
+	(core_file_command): Improved error messages from reading in of
+	u area in core file.  Changed calculation of offset of registers
+	to account for some machines putting it in as an offset rather
+	than an absolute address.  Changed error messages for reading of
+	registers from core file.
+
+	* coffread.c (read_file_hdr): Added final check for BADMAG macro
+	to use if couldn't recognize magic number.
+	* Makefile: Added explicit directions for alloca addition.
+	Included alloca.c in list of possible library files. Cleaned up
+	possible library usage.  Included additional information on gcc
+	and include files.  
+
+	* source.c, remote.c, inflow.c, dbxread.c, core.c, coffread.c:
+	Changed include of sys/fcntl.h to an include of fcntl.h (as per
+	posix; presumably this will break fewer machines.  I hopw).
+	* README: Added a pointer to comments at top of Makefile.
+	* Makefile: Added a comment about machines which need fcntl.h in
+	sys. 
+
+Tue Apr  4 11:29:04 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (set_prettyprint_command, set_unionprint_command,
+	format_info): Created.
+	(_initialize_valprint): Added to lists of commands.
+
+	* gdb.texinfo [Backtrace]: Added a section describing the format
+	if symbols have not yet been read in.
+
+	* valprint.c (val_print): Added code to prettyprint structures if
+	"prettyprint" is set and only to print unions below the top level
+	if "unionprint" is set.
+
+	* infcmd.c (registers_info), valprint.c (value_print, val_print):
+	Added argument to call to val_print indicating deptch of recursion.
+
+	* symtab.[ch] (find_pc_psymbol): Created; finds static function
+	psymbol with value nearest to but under value passed.
+	* stack.c (print_frame_info): Used above to make sure I have best
+	fit to pc value.
+
+	* symseg.h (struct partial_symbol): Added value field.
+	* dbxread.c (read_dbx_symtab): Set value field for partial symbols
+	saved (so that we can lookup static symbols).
+
+	* symtab.[ch] (find_pc_symtab): Changed to external.
+	* stack.c (select_frame): Call above to make sure that symbols for
+	a selected frame is readin.
+
+Mon Apr  3 12:48:16 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* stack.c (print_frame_info): Modified to only print out full
+	stack frame info on symbols whose tables have been read in.
+	* symtab.c, symtab.h (find_pc_psymtab): Made function external;
+	above needed it.
+
+	* main.c (,set_verbose_command, initialize_main): Created a
+	variable "info_verbose" which says to talk it up in various and
+	sundry places.  Added command to set this variable.
+	* gdb.texinfo (GDB Output): Added documentation on "set verbose"
+	and changed the name of the "Screen Output" section to "GDB
+	Output".
+	* dbxread.c (psymtab_to_symtab): Added information message about
+	symbol readin.  Conditionalized on above.
+
+	* dbxread.c (define_symbol): Made an "i" constant be of class
+	LOC_CONST and an "r" constant be of class LOC_CONST_BYTES.
+
+	* README: Made a note about modifications which may be necessary
+	to the manual for this version of gdb.
+
+	* blockframe.c (get_prev_frame_info): Now we get saved address and
+	check for validity before we check for leafism.  This means that
+	we will catch the fact that we are in start, but we will miss any
+	fns that start calls without an fp.  This should be fine.
+
+	* m-*.h (FRAME_CHAIN): Modified to return 0 if we are in start.
+	This is usually a test for within the first object file.
+	* m-sparc.h (FRAME_CHAIN): The test here is simply if the fp saved
+	off the the start sp is 0.
+
+	* blockframe.c (get_prev_frame_info): Removed check to see if we
+	were in start.  Screws up sparc.  
+
+	* m-sparc.h (FRAME_FIND_SAVED_REGISTERS): Changed test for dummy
+	frame to not need frame to be innermost.
+
+	* gdb.texinfo: Added section on frameless invocations of functions
+	and when gdb can and can't deal with this.
+
+	* stack.c (frame_info): Disallowed call if no inferior or core
+	file; fails gracefully if truely bad stack specfication has been
+	given (ie. parse_frame_specification returns 0).
+
+Fri Mar 31 13:59:33 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* infrun.c (normal_stop): Changed references to "unset-env" to
+	"delete env".
+
+	* infcmd.c (_initialize_infcmd): Change reference to set-args in
+	help run to "set args".
+
+	* remote.c (getpkt): Allow immediate quit when reading from
+	device; it could be hung.
+
+	* coffread.c (process_coff_symbol): Modify handling of REG
+	parameter symbols.
+
+Thu Mar 30 15:27:23 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (symbol_file_command): Use malloc to allocate the
+	space for the string table in symbol_file_command (and setup a
+	cleanup for this).  This allows a more graceful error failure if
+	there isn't any memory availible (and probably allows more memory
+	to be avail, depending on the machine).
+
+	Additional mods for handling GNU C++ (from Tiemann):
+	* dbxread.c (read_type): Added case for '#' type (method type, I
+	believe).
+	(read_struct_type): If type code is undefined, make the main
+	variant for the type be itself.  Allow recognition of bad format
+	in reading of structure fields.
+	* eval.c (evaluate_subexp): Modify evaluation of a member of a
+	structure and pointer to same to make sure that the syntax is
+	being used correctly and that the member is being accessed correctly.
+	* symseg.h: Added TYPE_CODE_METHOD to enum type_code.  Add a
+	pointer to an array of argument types to the type structure.
+	* symtab.c (lookout_method_type, smash_to_method_type): Created.
+	* symtab.h (TYPE_ARG_TYPES): Created.
+	* valops.c (call_function): Modified handling of methods to be the
+	same as handling of functions; no longer check for members.
+	* valprint.c (val_print, type_print_varspec_{prefix,suffix},
+	type_print_base): Added code to print method args correctly.
+	* values.c (value_virtual_fn_field): Modify access to virtual
+	function table.
+
+Wed Mar 29 13:19:34 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* findvar.c: Special cases for REGISTER_WINDOWS: 1) Return 0 if we
+	are the innermost frame, and 2) return the next frame in's value
+	if the SP is being looked for.
+
+	* blockframe.c (get_next_frame): Created; returns the next (inner)
+	frame of the called frame.
+	* frame.h: Extern delcaration for above.
+
+	* main.c (command_line_input): Stick null at end before doing
+	history expansion.
+
+Tue Mar 28 17:35:50 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Added namestring assignment to
+	N_DATA/BSS/ABS case.  Sigh.
+
+Sat Mar 25 17:49:07 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* expread.y: Defined YYDEBUG.
+
+Fri Mar 24 20:46:55 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symtab.c (make_symbol_completion_list): Completely rewrote to
+	never call psymtab_to_symtab, to do a correct search (no
+	duplicates) through the visible symbols, and to include structure
+	and union fields in the things that it can match.
+
+Thu Mar 23 15:27:44 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (dbx_create_type): Created; allocates and inits space
+	for a type without putting it on the type vector lists.
+	(dbx_alloc_type): Uses above.
+
+	* Makefile: xgdb.o now produced by default rules for .o.c.
+
+Fri Mar 17 14:27:50 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* infrun.c: Fixed up inclusion of aouthdr.h on UMAX_PTRACE.
+
+	* Makefile, config.gdb: Added hp300bsd to potential
+	configurations.
+	* hp300bsd-dep.c, m-hp300bsd.h: Created.
+
+	* infrun.c (wait_for_inferior): Rewrote to do no access to
+	inferior until we make sure it's still there.
+
+	* inflow.c (inferior_died): Added a select to force the selected
+	frame to null when inferior dies.
+
+	* dbxread.c (symbol_file_command): free and zero symfile when
+	discarding symbols.
+
+	* core.c (xfer_core_file): Extended and cleaned up logic in
+	interpeting memory address.
+
+	* core.c (xfer_core_file): Extended opening comment.
+
+Thu Mar 16 15:39:42 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* coffread.c (symbol_file_command): Free symfile name when freeing
+	contents.
+
+	* blockframe.c (get_prev_frame_info): Added to fatal error message
+	to indicate that it should never happen.
+
+	* stack.c (frame_info): Printed out value of "saved" sp seperately
+	to call attention to the fact that it isn't stored in memory
+	anywhere; the actual previous frames address is printed.
+
+	* m-sparc.h (FRAME_FIND_SAVED_REGS): Set address of sp saved in
+	frame to value of fp (rather than value of sp in current frame).
+
+	* expread.y: Allow "unsigned" as a type itself, as well as a type
+	modifier. 
+
+	* coffread.c: Added declaration for fclose
+
+Fri Mar 10 17:22:31 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (command_line_input): Checked for -1 return from
+	readline; indicates EOF.
+
+Fri Mar  3 00:31:27 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* remote.c (remote_open): Cast return from signal to (void (*)) to
+	avoid problems on machines where the return type of signal is (int
+	(*)). 
+
+	* Makefile: Removed deletion of version control from it (users
+	will need it for their changes).
+
+Thu Mar  2 15:32:21 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symmetry-dep.c (print_1167_regs): Print out effective doubles on
+	even number regs.
+	(fetch_inferior_registers): Get the floating point regs also.
+
+	* xgdb.c (do_command): Copied command before calling execute
+	command (so that execute_command wouldn't write into text space).
+
+	* copying.awk: Created (will produce copying.c as output when
+	given COPYING as input).
+	* Makefile: Used above to create copying.c.
+	* main.c: Took out info_warranty and info_copying.
+
+	* *.*: Changed copyright notice to use new GNU General Public
+	License (includes necessary changes to manual).
+
+	* xgdb.c (create_text_widget): Created text_widget before I create
+	the source and sink.
+	(print_prompt): Added fflush (stdout).
+
+	* Makefile: Added -lXmu to the compilation line for xgdb.  Left
+	the old one there incase people still had R2.
+
+	* README: Added note about -gg format.
+
+	* remote.c (getpkt): Fixed typo; && ==> &.
+
+	* Makefile: Added new variable READLINE_FLAGS so that I could
+	force compilation of readline.c and history.c with -DSYSV on
+	system V machines.  Mentioned in Makefile comments at top.
+
+Wed Mar  1 17:01:01 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* hp9k320-dep.c (store_inferior_registers): Fixed typo.
+
+Fri Feb 24 14:58:45 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* hp9k320-dep.c (store_inferior_registers,
+	fetch_inferior_registers): Added support for remote debugging. 
+
+	* remote.c (remote_timer): Created.
+	(remote_open, readchar): Setup to timeout reads if they take
+	longer than "timeout".  This allows one to debug how long such
+	things take.
+	(putpkt): Modified to print a debugging message (if such things
+	are enabled) each time it resends a packet.
+	(getpkt): Modified to make the variable CSUM unsigned and read it
+	CSUM with an & 0xff (presumably to deal with poor sign extension
+	on some machines).  Also made c1 and c2 unsigned.
+	(remote_wait): Changed buffer to unsigned status.
+	(remote_store_registers, remote_write_bytes): Puts a null byte at
+	the end of the control string.
+
+	* infcmd.c (attach_command, detach_command, _initialize_infcmd):
+	Made attach_command and detach_command always availible, but
+	modified them to only allow device file attaches if ATTACH_DETACH
+	is not defined.
+
+	* gdb.texinfo: Added cross reference from attach command to remote
+	debugging. 
+
+Thu Feb 23 12:37:59 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* remote.c (remote_close): Created to close the remote connection
+	and set the remote_debugging flag to 0.
+	* infcmd.c (detach_command): Now calls the above when appropriate. 
+
+	* gdb.texinfo: Removed references to the ``Distribution'' section
+	in the copyright.
+
+	* main.c, utils.c (ISATTY): Created default defintions of this
+	macro which use isatty and fileno.
+	* utils.c (fprintf_filtered, print_spaces_filtered), main.c
+	(command_loop, command_line_input): Used this macro.
+	* m-news.h: Created a definition to override this one.
+
+	* utils.c (fprintf_filtered): Made line_size static (clueless).
+
+	* utils.c (fprintf_filtered): Changed max length of line printed
+	to be 255 chars or twice the format length.
+
+	* symmetry-dep.c, m-symmetry: Fixed typo (^L ==> ).
+
+	* printcmd.c (do_examine): Fixed typo (\n ==> \t).
+
+Wed Feb 22 16:00:33 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+        Contributed by Jay Vosburgh (jay@mentor.cc.purdue.edu)
+	* m-symmetry.h, symmetry-dep.c: Created.
+	* Makefile: Added above in appropriate lists.
+	* config.gdb: Added "symmetry" target.
+
+	* utils.c (prompt_for_continue): Zero'd chars_printed also.
+
+	* utils.c (fprintf_filtered): Call prompt for continue instead of
+	doing it yourself.
+
+	* dbxread.c (read_dbx_symtab): Added code to conditionalize what
+	symbol type holds to "x.o" or "-lx" symbol that indicates the
+	beginning of a new file.
+
+Tue Feb 21 16:22:13 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* gdb.texinfo: Deleted @ignore block at end of file.
+
+	* findvar.c, stack.c: Changed comments that refered to "frame
+	address" to "frame id".
+
+	* findvar.c (locate_var_value): Modified so that taking the
+	address of an array generates an object whose type is a pointer to
+	the elements of the array.
+
+Sat Feb 18 16:35:14 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* gdb.texinfo: Removed reference to "!" as a shell escape
+	character.  Added a section on controling screen output
+	(pagination); changing "Input" section to "User Interface"
+	section.  Changed many inappropriate subsubsection nodes into
+	subsections nodes (in the readline and history expansion
+	sections). 
+
+Fri Feb 17 11:10:54 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* utils.c (set_screensize_command): Created.
+	(_initialize_utils): Added above to setlist.
+
+	* main.c (main): Added check to see if ~/.gdbinit and .gdbinit
+	were the same file; only one gets read if so.  Had to include
+	sys/stat.h for this.
+
+	* valprint.c (type_print_base): Changed calls to print_spaces to
+	print_spaces_filtered. 
+
+	* main.c (command_line_input): Chaned test for command line
+	editing to check for stdin and isatty.
+
+	* main.c (command_loop): Call reinitialize_more_filter before each
+	command (if reading from stdin and it's a tty).
+	utils.c (initialize_more_filter): Changed name to
+	reinitialize_more_filter; killed arguments.
+	utils.c (_initialize_utils): Created; initialized lines_per_page
+	and chars_per_line here.
+
+	* utils.c (fprintf_filtered): Removed printing of "\\\n" after
+	printing linesize - 1 chars; assume that the screen display will
+	take care of that.  Still watching that overflow.
+
+	* main.c: Created the global variables linesize and pagesize to
+	describe the number of chars per line and lines per page.
+
+Thu Feb 16 17:27:43 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* printcmd.c (do_examine, print_scalar_formatted, print_address,
+	whatis_command, do_one_display, ptype_command), valprint.c
+	(value_print, val_print, type_print_method_args, type_print_1,
+	type_print_derivation_info, type_print_varspec_suffix,
+	type_print_base), breakpoint.c (breakpoints_info, breakpoint_1),
+	values.c (history_info), main.c (editing_info, warranty_info,
+	copying_info), infcmd.c (registers_info), inflow.c
+	(term_status_command), infrun.c (signals_info), stack.c
+	(backtrace_command, print_frame_info), symtab.c (list_symbols,
+	output_source_filename), command.c (help_cmd, help_list,
+	help_command_list): Replaced calls to printf, fprintf, and putc
+	with calls to [f]printf_filtered to handle more processing.
+	Killed local more emulations where I noticed them.
+
+Wed Feb 15 15:27:36 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* defs.h, utils.c (initialize_more_filter, fprintf_filtered,
+	printf_filtered): Created a printf that will also act as a more
+	filter, prompting the user for a <return> whenever the page length
+	is overflowed.
+
+	* symtab.c (list_symbols): Elminated some code inside of an #if 0. 
+
+Tue Feb 14 11:11:24 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* Makefile: Turned off backup versions for this file; it changes
+	too often.
+
+	* command.c (lookup_cmd, _initialize_command): Changed '!' so that
+	it was no longer a shell escape.  "sh" must be used.
+
+	* main.c (command_line_input, set_history_expansion,
+	initialize_main): Turned history expansion on, made it the
+	default, and only execute it if the first character in the line is
+	a '!'.
+
+	* version.c, gdb.texinfo: Moved version to 3.2 (as usual, jumping
+	the gun some time before release).
+
+	* gdb.texinfo: Added sections (adapted from Brian's notes) on
+	command line editing and history expansion.
+
+	* main.c (set_command_editing, initialize_main): Modified name to
+	set_editing and modified command to "set editing".
+
+	* Makefile: Put in dependencies for READLINEOBJS.
+
+	* main.c (history_info, command_info): Combined into new command
+	info; deleted history_info.
+	(initialize_main): Deleted "info history" command; it was
+	interfering with the value history.
+
+	* coffread.c (enter_linenos): Modified to do bit copy instead of
+	pointer dereference, since the clipper machine can't handle having
+	longs on short boundaries.
+	(read_file_hdr): Added code to get number of syms for clipper.
+
+	* stack.c (return_command): Fixed method for checking when all of
+	the necessary frames had been popped.
+
+	* dbxread.c (read_dbx_symtab (ADD_PSYMBOL_TO_LIST)): Fixed typo in
+	allocation length.
+
+Mon Feb 13 10:03:27 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Split assignment to namestring into
+	several different assignments (so that it wouldn't be done except
+	when it had to be).  Shortened switches and duplicated code to
+	produce the lowest possible execution time.  Commented (at top of
+	switch) which code I duplicated.
+
+	* dbxread.c (read_dbx_symtab): Modified which variables were
+	register and deleted several variables which weren't used.  Also
+	eliminated 'F' choice from subswitch, broke out strcmp's, reversed
+	compare on line 1986, and elminated test for !namestring[0]; it is
+	caught by following test for null index of ':'.
+
+Sun Feb 12 12:57:56 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* main.c (gdb_completer_word_break_characters): Turned \~ into ~.
+
+Sat Feb 11 15:39:06 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* symtab.c (find_pc_psymtab): Created; checks all psymtab's till
+	it finds pc.
+	(find_pc_symtab): Used; fatal error if psymtab found is readin
+	(should have been caught in symtab loop).
+	(lookup_symbol): Added check before scan through partial symtab
+	list for symbol name to be on the misc function vector (only if in
+	VAR_NAMESPACE).  Also made sure that psymtab's weren't fooled with
+	if they had already been read in.
+	(list_symbols): Checked through misc_function_vector for matching
+	names if we were looking for functions.
+	(make_symbol_completion_list): Checked through
+	misc_function_vector for matching names.
+	* dbxread.c (read_dbx_symtab): Don't bother to do processing on
+	global function types; this will be taken care of by the
+	misc_function hack.
+
+	* symtab.h: Modified comment on misc_function structure.
+
+Fri Feb 10 18:09:33 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* symseg.h, dbxread.c (read_dbx_symtab, init_psymbol_list,
+	start_psymtab, end_psymtab), coffread.c (_initialize_coff),
+	symtab.c (lookup_partial_symbol, list_symbols,
+	make_symbol_completion_list): Changed separate variables for
+	description of partial symbol allocation into a specific kind of
+	structure.
+
+	(read_dbx_symtab, process_symbol_for_psymtab): Moved most of
+	process_symbol_for_psymtab up into read_dbx_symtab, moved a couple
+	of symbol types down to the ingore section, streamlined (I hope)
+	code some, modularized access to psymbol lists.
+
+Thu Feb  9 13:21:19 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (command_line_input): Made sure that it could recognize
+	newlines as indications to repeat the last line.
+
+	* symtab.c (_initialize_symtab): Changed size of builtin_type_void
+	to be 1 for compatibility with gcc.
+
+	* main.c (initialize_main): Made history_expansion the default
+	when gdb is compiled with HISTORY_EXPANSION.
+
+	* readline.c, readline.h, history.c, history.h, general.h,
+	emacs_keymap.c, vi_keymap.c, keymaps.c, funmap.c: Made all of
+	these links to /gp/gnu/bash/* to keep them updated.
+	* main.c (initialize_main): Made default be command editing on. 
+
+Wed Feb  8 13:32:04 1989  & Smith  (randy at hobbes)
+
+	* dbxread.c (read_dbx_symtab): Ignore N_BSLINE on first
+	readthrough. 
+
+	* Makefile: Removed convex-dep.c from list of distribution files.
+
+Tue Feb  7 14:06:25 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c: Added command lists sethistlist and unsethistlist to
+	accesible command lists.
+	(parse_binary_operation): Created to parse a on/1/yes vs. off/0/no
+	spec.
+	(set_command_edit, set_history, set_history_expansion,
+	set_history_write, set_history_size, set_history_filename,
+	command_info, history_info): Created to allow users to control
+	various aspects of command line editing.
+
+	* main.c (symbol_creation_function): Created.
+	(command_line_input, initialize_main): Added rest of stuff
+	necessary for calling bfox' command editing routines under
+	run-time control.
+	* Makefile: Included readline and history source files for command
+	editing; also made arrangements to make sure that the termcap
+	library was available.
+	* symtab.c (make_symbol_completion_list): Created.
+
+Mon Feb  6 16:25:25 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c: Invented variables to control command editing.
+	command_editing_p, history_expansion_p, history_size,
+	write_history_p, history_filename.  Initialized them to default
+	values in initialize_main.
+
+	* infcmd.c (registers_info), infrun.c (signals_info), 
+	* main.c (gdb_read_line): Changed name to command_line_input.
+	(readline): Changed name to gdb_readline; added second argument
+	indicating that the read value shouldn't be saved (via malloc).
+	* infcmd.c (registers_info), infrun.c (signals_info), main.c
+	(copying_info), symtab.c (output_source_filename, MORE,
+	list_symbols): Converted to use gdb_readline in place of
+	gdb_read_line. 
+
+
+Sun Feb  5 17:34:38 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* blockframe.c (get_frame_saved_regs): Removed macro expansion
+	that had accidentally been left in the code.
+
+Sat Feb  4 17:54:14 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* main.c (gdb_read_line, readline): Added function readline and
+	converted gdb_read_line to use it.  This was a conversion to the
+	line at a time style of input, in preparation for full command
+	editing. 
+
+Fri Feb  3 12:39:03 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Call end_psymtab at the end of
+	read_dbx_symtab if any psymtab still needs to be completed.
+
+	* config.gdb, sun3-dep.c: Brought these into accord with the
+	actual sun2 status (no floating point period; sun3-dep.c unless
+	has os > 3.0).
+	* m-sun2os2.h: Deleted; not needed.
+
+	* config.gdb: Added a couple of aliases for machines in the
+	script. 
+
+	* infrun.c: Added inclusion of aouthdr.h inside of #ifdef UMAX
+	because ptrace needs to know about the a.out header.
+
+	* Makefile: Made dep.o depend on dep.c and config.status only.
+
+	* expread.y: Added declarations of all of the new write_exp_elt
+	functions at the include section in the top.
+
+	* Makefile: Added a YACC definition so that people can use bison
+	if they wish.
+
+	* Makefile: Added rms' XGDB-README to the distribution.
+
+	* Makefile: Added removal of init.o on a "make clean".
+
+Thu Feb  2 16:27:06 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* *-dep.c: Deleted definition of COFF_FORMAT if AOUTHDR was
+	defined since 1) We *may* (recent mail message) want to define
+	AOUTHDR under a basically BSD system, and 2) AOUTHDR is sometimes
+	a typedef in coff encapsulation setups.  Also removed #define's of
+	AOUTHDR if AOUTHDR is already defined (inside of coff format).  
+	* core.c, dbxread.c: Removed #define's of AOUTHDR if AOUTHDR is
+	already defined (inside of coff format).
+
+Tue Jan 31 12:56:01 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* GDB 3.1 released.
+
+	* values.c (modify_field): Changed test for endianness to assign
+	to integer and reference character (so that all bits would be
+	defined). 
+
+Mon Jan 30 11:41:21 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* news-dep.c: Deleted inclusion of fcntl.h; just duplicates stuff
+	found in sys/file.h.
+
+	* i386-dep.c: Included default definition of N_SET_MAGIC for
+	COFF_FORMAT.
+
+	* config.gdb: Added checks for several different operating
+	systems. 
+
+	* coffread.c (read_struct_type): Put in a flag variable so that
+	one could tell when you got to the end of a structure.
+
+	* sun3-dep.c (core_file_command): Changed #ifdef based on SUNOS4
+	to ifdef based on FPU.
+
+	* infrun.c (restore_inferior_status): Changed error message to
+	"unable to restore previously selected frame".
+
+	* dbxread.c (read_dbx_symtab): Used intermediate variable in error
+	message reporting a bad symbol type.  (scan_file_globals,
+	read_ofile_symtab, read_addl_syms): Data type of "type" changed to
+	unsigned char (which is what it is).
+	* i386-dep.c: Removed define of COFF_FORMAT if AOUTHDR is defined.
+	Removed define of a_magic to magic (taken care of by N_MAGIC).
+	(core_file_command): Zero'd core_aouthdr instead of setting magic
+	to zero.
+	* i386-pinsn.c: Changed jcxz == jCcxz in jump table.
+	(putop): Added a case for 'C'.
+	(OP_J): Added code to handle possible masking of PC value on
+	certain kinds of data.
+	m-i386gas.h: Moved COFF_ENCAPSULATE to before inclusion of
+	m-i386.h and defined NAMES_HAVE_UNDERSCORE.
+
+	* coffread.c (unrecrod_misc_function, read_coff_symtab): Added
+	symbol number on which error occured to error output.
+
+Fri Jan 27 11:55:04 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Makefile: Removed init.c in make clean.  Removed it without -f
+	and with leading - in make ?gdb.
+
+Thu Jan 26 15:08:03 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	Changes to get it to work on gould NP1.
+	* dbxread.c (read_dbx_symtab): Included cases for N_NBDATA and
+	N_NBBSS.
+	(psymtab_to_symtab): Changed declaration of hdr to
+	DECLARE_FILE_HEADERS.  Changed access to use STRING_TABLE_SIZE and
+	SYMBOL_TABLE_SIZE.
+	* gld-pinsn.c (findframe): Added declaration of framechain() as
+	FRAME_ADDR. 
+
+	* coffread.c (read_coff_symtab): Avoided treating typedefs as
+	external symbol definitions.
+
+Wed Jan 25 14:45:43 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Makefile: Removed reference to alloca.c.  If they need it, they
+	can pull alloca.o from the gnu-emacs directory.
+
+	* version.c, gdb.texinfo: Updated version to 3.1 (jumping the gun
+	a bit so that I won't forget when I release).
+
+	* m-sun2.h, m-sun2os2.h, m-sun3os4.h, config.gdb: Modified code so
+	that default includes new sun core, ptrace, and attach-detach.
+	Added defaults for sun 2 os 2.
+
+	Modifications to reset stack limit back to what it used to be just
+	before exec.  All mods inside of #ifdef SET_STACK_LIMIT_HUGE.
+	* main.c: Added global variable original_stack_limit.
+	(main): Set original_stack_limit to original stack limit.
+	* inflow.c: Added inclusion of necessary files and external
+	reference to original_stack_limit.
+	(create_inferior): Reset stack limit to original_stack_limit.
+
+	* dbxread.c (read_dbx_symtab): Killed PROFILE_SYMBOLS ifdef.
+
+	* sparc-dep.c (isabranch): Multiplied offset by 4 before adding it
+	to addr to get target.
+
+	* Makefile: Added definition of SHELL to Makefile.
+
+	* m-sun2os4.h: Added code to define NEW_SUN_PTRACE, NEW_SUN_CORE,
+	and ATTACH_DETACH.
+	* sun3-dep.c: Added code to avoid fp regs if we are on a sun2.
+
+Tue Jan 24 17:59:14 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_array_type): Added function.
+	(read_type): Added call to above instead of inline code.
+
+	* Makefile: Added ${GNU_MALLOC} to the list of dependencies for
+	the executables.
+
+Mon Jan 23 15:08:51 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* gdb.texinfo: Added paragraph to summary describing languages
+	with which gdb can be run.  Also added descriptions of the
+	"info-methods" and "add-file" commands.
+
+	* symseg.h: Commented a range type as having TYPE_TARGET_TYPE
+	pointing at the containing type for the range (often int).
+	* dbxread.c (read_range_type): Added code to do actual range types
+	if they are defined.  Assumed that the length of a range type is
+	the length of the target type; this is a lie, but will do until
+	somebody gets back to me as to what these silly dbx symbols mean.
+	
+	* dbxread.c (read_range_type): Added code to be more picky about
+	recognizing builtins as range types, to treat types defined as
+	subranges of themselves to be subranges of int, and to recognize
+	the char type idiom from dbx as a special case.
+
+Sun Jan 22 01:00:13 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-vax.h: Removed definition of FUNCTION_HAS_FRAME_POINTER.
+	* blockframe.c (get_prev_frame_info): Removed default definition
+	and use of above.  Instead conditionalized checking for leaf nodes
+	on FUNCTION_START_OFFSET (see comment in code).
+
+Sat Jan 21 16:59:19 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_range_type): Fixed assumption that integer was
+	always type 1.
+
+	* gdb.texinfo: Fixed spelling mistake and added a note in the
+	running section making it clear that users may invoke subroutines
+	directly from gdb.
+
+	* blockframe.c: Setup a default definition for the macro
+	FUNCTION_HAS_FRAME_POINTER.
+	(get_prev_frame_info): Used this macro instead of checking
+	SKIP_PROLOGUE directly.
+	* m-vax.h: Overroad definition; all functions on the vax have
+	frame pointers.
+
+Fri Jan 20 12:25:35 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* core.c: Added default definition of N_MAGIC for COFF_FORMAT.
+
+	* xgdb.c: Installed a fix to keep the thing from dying when there
+	isn't any frame selected.
+
+	* core.c: Made a change for the UMAX system; needs a different
+	file included if using that core format. 
+
+	* Makefile: Deleted duplicate obstack.h in dbxread.c dependency.
+
+	* munch: Modified (much simpler) to cover (I hope) all cases.
+
+	* utils.c (save_cleanups, restore_cleanups): Added functions to
+	allow you to push and pop the chain of cleanups to be done.
+	* defs.h: Declared the new functions.
+	* main.c (catch_errors): Made sure that the only cleanups which
+	would be done were the ones put on the chain *after* the current
+	location. 
+
+	* m-*.h (FRAME_CHAIN_VALID): Removed check on pc in the current
+	frame being valid.
+	* blockframe.c (get_prev_frame_info): Made the assumption that if
+	a frame's pc value was within the first object file (presumed to
+	be /lib/crt0.o), that we shouldn't go any higher.
+
+	* infrun.c (wait_for_inferior): Do *not* execute check for stop pc
+	at step_resume_break if we are proceeding over a breakpoint (ie.
+	if trap_expected != 0).
+
+	* Makefile: Added -g to LDFLAGS.
+
+	* m-news.h (POP_FRAME) Fixed typo.
+
+	* printcmd.c (print_frame_args): Modified to print out register
+	params in order by .stabs entry, not by register number.
+
+	* sparc-opcode.h: Changed declaration of (struct
+	arith_imm_fmt).simm to be signed (as per architecture manual).
+	* sparc-pinsn.c (fprint_addr1, print_insn): Forced a cast to an
+	int, so that we really would get signed behaivior (default for sun
+	cc is unsigned).
+
+	* i386-dep.c (i386_get_frame_setup): Replace function with new
+	function provided by pace to fix bug in recognizing prologue.
+
+Thu Jan 19 11:01:22 1989  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* infcmd.c (run_command): Changed error message to "Program not
+	restarted." 
+
+	* value.h: Changed "frame" field in value structure to be a
+	FRAME_ADDR (actually CORE_ADDR) so that it could survive across
+	calls. 
+
+	* m-sun.h (FRAME_FIND_SAVED_REGS): Fixed a typo.
+
+	* value.h: Added lval: "lval_reg_frame_relative" to indicate a
+	register that must be interpeted relative to a frame.  Added
+	single entry to value structure: "frame", used to indicate which
+	frame a relative regnum is relative to.
+	* findvar.c (value_from_register): Modified to correctly setup
+	these fields when needed.  Deleted section to fiddle with last
+	register copied on little endian machine; multi register
+	structures will always occupy an integral number of registers.
+	(find_saved_register): Made extern.
+	* values.c (allocate_value, allocate_repeat_value): Zero frame
+	field on creation.
+	* valops.c (value_assign): Added case for lval_reg_frame_relative;
+	copy value out, modify it, and copy it back.  Desclared
+	find_saved_register as being external.
+	* value.h: Removed addition of kludgy structure; thoroughly
+	commented file.
+	* values.c (free_value, free_all_values, clear_value_history,
+	set_internalvar, clear_internavars): Killed free_value.
+
+Wed Jan 18 20:09:39 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* value.h: Deleted struct partial_storage; left over from
+	yesterday. 
+
+	* findvar.c (value_from_register): Added code to create a value of
+	type lval_reg_partsaved if a value is in seperate registers and
+	saved in different places.
+
+Tue Jan 17 13:50:18 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* value.h: Added lval_reg_partsaved to enum lval_type and
+	commented enum lval_type.  Commented value structure.
+	Added "struct partial_register_saved" to value struct; added
+	macros to deal with structure to value.h.
+	* values.c (free_value): Created; special cases lval_reg_partsaved
+	(which has a pointer to an array which also needs to be free).
+	(free_all_values, clear_value_history, set_internalvar,
+	clear_internalvars): Modified to use free_values.
+
+	* m-sunos4.h: Changed name to sun3os4.h.
+	* m-sun2os4.h, m-sun4os4.h: Created.
+	* config.gdb: Added configuration entries for each of the above.
+	* Makefile: Added into correct lists.
+
+	* Makefile: Added dependencies on a.out.encap.h.  Made
+	a.out.encap.h dependent on a.out.gnu.h and dbxread.c dependent on
+	stab.gnu.h. 
+
+	* infrun.c, remote.c: Removed inclusion of any a.out.h files in
+	these files; they aren't needed.
+
+	* README: Added comment about bug reporting and comment about
+	xgdb. 
+
+	* Makefile: Added note to HPUX dependent section warning about
+	problems if compiled with gcc and mentioning the need to add
+	-Ihp-include to CFLAGS if you compile on those systems.  Added a
+	note about needing the GNU nm with compilers *of gdb* that use the
+	coff encapsulate feature also.  * hp-include: Made symbolic link
+	over to /gp/gnu/binutils.
+
+	* Makefile: Added TSOBS NTSOBS OBSTACK and REGEX to list of things
+	to delete in "make clean".  Also changed "squeakyclean" target as
+	"realclean". 
+
+	* findvar.c (value_from_register): Added assignment of VALUE_LVAL
+	to be lval_memory when that is appropriate (original code didn't
+	bother because it assumed that it was working with a pre lval
+	memoried value).
+
+	* expread.y (yylex): Changed to only return type THIS if the
+	symbol "$this" is defined in some block superior or equal to the
+	current expression context block.
+
+Mon Jan 16 13:56:44 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-*.h (FRAME_CHAIN_VALID): On machines which check the relation
+	of FRAME_SAVED_PC (thisframe) to first_object_file_end (all except
+	gould), make sure that the pc of the current frame also passes (in
+	case someone stops in _start).
+
+	* findvar.c (value_of_register): Changed error message in case of
+	no inferior or core file.
+
+	* infcmd.c (registers_info): Added a check for inferior or core
+	file; error message if not.
+
+	* main.c (gdb_read_line): Modified to take prompt as argument and
+	output it to stdout.
+	* infcmd.c (registers_info, signals_info), main.c (command_loop,
+	read_command_lines, copying_info), symtab.c (decode_line_2,
+	output_source_filename, MORE, list_symbols): Changed calling
+	convention used to call gdb_read_line.
+
+	* infcmd.c, infrun.c, main.c, symtab.c: Changed the name of the
+	function "read_line" to "gdb_read_line".
+	* breakpoint.c: Deleted external referenced to function
+	"read_line" (not needed by code).
+
+Fri Jan 13 12:22:05 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* i386-dep.c: Include a.out.encap.h if COFF_ENCAPSULATE.
+	(N_SET_MAGIC): Defined if not defined by include file.
+	(core_file_command): Used N_SET_MAGIC instead of assignment to
+	a_magic.
+	(exec_file_command): Stuck in a HEADER_SEEK_FD.
+
+	* config.gdb: Added i386-dep.c as depfile for i386gas choice.
+
+	* munch: Added -I. to cc to pick up things included by the param
+	file. 
+
+	* stab.gnu.def: Changed name to stab.def (stab.gnu.h needs this name).
+	* Makefile: Changed name here also.
+	* dbxread.c: Changed name of gnu-stab.h to stab.gnu.h.
+
+	* gnu-stab.h: Changed name to stab.gnu.h.
+	* stab.gnu.def: Added as link to binutils.
+	* Makefile: Put both in in the distribution.
+
+Thu Jan 12 11:33:49 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c: Made which stab.h is included dependent on
+	COFF_ENCAPSULATE; either <stab.h> or "gnu-stab.h".
+	* Makefile: Included gnu-stab.h in the list of files to include in
+	the distribution.
+	* gnu-stab.h: Made a link to /gp/gnu/binutils/stab.h
+
+	* Makefile: Included a.out.gnu.h and m-i386gas.h in list of
+	distribution files.
+	* m-i386gas.h: Changed to include m-i386.h and fiddle with it
+	instead of being a whole new file.
+	* a.out.gnu.h: Made a link to /gp/gnu/binutils/a.out.gnu.h.
+
+	Chris Hanson's changes to gdb for hp Unix.
+	* Makefile: Modified comments on hpux.
+	* hp9k320-dep.c: #define'd WOPR & moved inclusion of signal.h
+	* inflow.c: Moved around declaratiosn of <sys/fcntl.h> and
+	<sys/ioctl.h> inside of USG depends and deleted all SYSV ifdef's
+	(use USG instead).
+	* munch: Modified to accept any number of spaces between the T and
+	the symbol name.
+
+	Pace's changes to gdb to work with COFF_ENCAPSULATE (robotussin):
+	* config.gdb: Added i386gas to targets.
+	* default-dep.c: Include a.out.encap.h if COFF_ENCAPSULATE.
+	(N_SET_MAGIC): Defined if not defined by include file.
+	(core_file_command): Used N_SET_MAGIC instead of assignment to a_magic.
+	(exec_file_command): Stuck in a HEADER_SEEK_FD.
+	* infrun.c, remote.c: Added an include of a.out.encap.h if
+	COFF_ENCAPSULATE defined.  This is commented out in these two
+	files, I presume because the definitions aren't used.
+	* m-i386gas.h: Created.
+	* dbxread.c: Included defintions for USG.
+	(READ_FILE_HEADERS): Now uses HEADER_SEEK_FD if it exists.
+	(symbol_file_command): Deleted use of HEADER_SEEK_FD.
+	* core.c: Deleted extra definition of COFF_FORMAT.
+	(N_MAGIC): Defined to be a_magic if not already defined.
+	(validate_files): USed N_MAGIC instead of reading a_magic.
+
+Wed Jan 11 12:51:00 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* remote.c: Upped PBUFSIZ.
+	(getpkt): Added zeroing of c inside loop in case of error retry.
+
+	* dbxread.c (read_dbx_symtab, process_symbol_for_psymtab): Removed
+	code to not put stuff with debugging symbols in the misc function
+	list.  Had been ifdef'd out.
+
+	* gdb.texinfo: Added the fact that the return value for a function
+	is printed if you use return.
+
+	* infrun.c (wait_for_inferior): Removed test in "Have we hit
+	step_resume_breakpoint" for sp values in proper orientation.  Was
+	in there for recursive calls in functions without frame pointers
+	and it was screwing up calls to alloca.  
+
+	* dbxread.c: Added #ifdef COFF_ENCAPSULATE to include
+	a.out.encap.h.
+	(symbol_file_command): Do HEADER_SEEK_FD when defined.
+	* dbxread.c, core.c: Deleted #ifdef ROBOTUSSIN stuff.
+	* robotussin.h: Deleted local copy (was symlink).
+	* a.out.encap.h: Created symlink to
+	/gp/gnu/binutils/a.out.encap.h.
+	* Makefile: Removed robotussin.h and included a.out.encap.h in
+	list of files.
+
+	* valprint.c (val_print, print_scalar_formatted): Changed default
+	precision of printing float value; now 6 for a float and 16 for a
+	double.
+
+	* findvar.c (value_from_register): Added code to deal with the
+	case where a value is spread over several registers.  Still don't
+	deal with the case when some registers are saved in memory and
+	some aren't.
+
+Tue Jan 10 17:04:04 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* xgdb.c (xgdb_create_window): Removed third arg (XtDepth) to
+	frameArgs.  
+
+	* infrun.c (handle_command): Error if signal number is less or
+	equal to 0 or greater or equal to NSIG or a signal number is not
+	provided.
+
+	* command.c (lookup_cmd): Modified to not convert command section
+	of command line to lower case in place (in case it isn't a
+	subcommand, but an argument to a command).
+
+Fri Jan  6 17:57:34 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c: Changed "text area" to "data area" in comments on
+	N_SETV. 
+
+Wed Jan  4 12:29:54 1989  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c: Added definitions of gnu symbol types after inclusion
+	of a.out.h and stab.h.
+
+Mon Jan  2 20:38:31 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* eval.c (evaluate_subexp): Binary logical operations needed to
+	know type to determine whether second value should be evaluated.
+	Modified to discover type before binup_user_defined_p branch.
+	Also commented "enum noside".
+
+	* Makefile: Changed invocations of munch to be "./munch".
+
+	* gdb.texinfo: Updated to refer to current version of gdb with
+	January 1989 last update.
+
+	* coffread.c (end_symtab): Zero context stack when finishing
+	lexical contexts.
+	(read_coff_symtab): error if context stack 0 in ".ef" else case.
+
+	* m-*.h (FRAME_SAVED_PC): Changed name of argument from "frame" to
+	"FRAME" to avoid problems with replacement of "->frame" part of
+	macro. 
+
+	* i386-dep.c (i386_get_frame_setup): Added codestream_get() to
+	move codestream pointer up to the correct location in "subl $X,
+	%esp" case.
+
+Sun Jan  1 14:24:35 1989  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* valprint.c (val_print): Rewrote routine to print string pointed
+	to by char pointer; was producing incorrect results when print_max
+	was 0.
+
+Fri Dec 30 12:13:35 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab, process_symbol_for_psymtab): Put
+	everything on the misc function list.
+
+	* Checkpointed distribution.
+
+	* Makefile: Added expread.tab.c to the list of things slated for
+	distribution. 
+
+Thu Dec 29 10:06:41 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* stack.c (set_backtrace_limit_command, backtrace_limit_info,
+	bactrace_command, _initialize_stack): Removed modifications for
+	limit on backtrace.  Piping the backtrace through an interuptable
+	"more" emulation is a better way to do it.
+
+Wed Dec 28 11:43:09 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* stack.c
+	(set_backtrace_limit_command): Added command to set a limit to the
+	number of frames for a backtrace to print by default.
+	(backtrace_limit_info): To print the current limit.
+	(backtrace_command): To use the limit.
+	(_initialize_stack): To initialize the limit to its default value
+	(30), and add the set and info commands onto the appropriate
+	command lists.
+
+    	* gdb.texinfo: Documented changes to "backtrace" and "commands"
+	commands.
+
+	* stack.c (backtrace_command): Altered so that a negative argument
+	would show the last few frames on the stack instead of the first
+	few.
+	(_initialize_stack): Modified help documentation.
+
+	* breakpoint.c (commands_command): Altered so that "commands" with
+	no argument would refer to the last breakpoint set.
+	(_initialize_breakpoint): Modified help documentation.
+
+	* infrun.c (wait_for_inferior): Removed ifdef on Sun4; now you can
+	single step through compiler generated sub calls and will die if
+	you next off of the end of a function.
+
+	* sparc-dep.c (single_step): Fixed typo; "break_insn" ==> "sizeof
+	break_insn". 
+
+	* m-sparc.h (INIT_EXTRA_FRAME_INFO): Set the bottom of a stack
+	frame to be the bottom of the stack frame inner from this, if that
+	inner one is a leaf node.
+
+	* dbxread.c (read_dbx_symtab): Check to make sure we don't add a
+	psymtab to it's own dependency list.
+
+	* dbxread.c (read_dbx_symtab): Modified check for duplicate
+	dependencies to catch them correctly.
+
+Tue Dec 27 17:02:09 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-*.h (FRAME_SAVED_PC): Modified macro to take frame info
+	pointer as argument.
+	* stack.c (frame_info), blockframe.c (get_prev_frame_info),
+	gld-pinsn.c (findframe), m-*.h (SAVED_PC_AFTER_CALL,
+	FRAME_CHAIN_VALID, FRAME_NUM_ARGS): Changed usage of macros to
+	conform to above.
+	* m-sparc.h (FRAME_SAVED_PC), sparc-dep.c (frame_saved_pc):
+	Changed frame_saved_pc to have a frame info pointer as an
+	argument. 
+
+	* m-vax.h, m-umax.h, m-npl.h, infrun.c (wait_for_inferior),
+	blockframe.c (get_prev_frame_info): Modified SAVED_PC_AFTER_CALL
+	to take a frame info pointer as an argument.
+
+	* blockframe.c (get_prev_frame_info): Altered the use of the
+	macros FRAME_CHAIN, FRAME_CHAIN_VALID, and FRAME_CHAIN_COMBINE to
+	use frame info pointers as arguments instead of frame addresses.
+	* m-vax.h, m-umax.h, m-sun3.h, m-sun3.h, m-sparc.h, m-pn.h,
+	m-npl.h, m-news.h, m-merlin.h, m-isi.h, m-hp9k320.h, m-i386.h:
+	Modified definitions of the above macros to suit.
+	* m-pn.h, m-npl.h, gould-dep.c (findframe): Modified findframe to
+	use a frame info argument; also fixed internals (wouldn't work
+	before).
+
+	* m-sparc.h: Cosmetic changes; reordered some macros and made sure
+	that nothing went over 80 lines.
+
+Thu Dec 22 11:49:15 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* Version 3.0 released.
+
+	* README: Deleted note about changing -lobstack to obstack.o.
+
+Wed Dec 21 11:12:47 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-vax.h (SKIP_PROLOGUE): Now recognizes gcc prologue also.
+
+	* blockframe.c (get_prev_frame_info): Added FUNCTION_START_OFFSET
+	to result of get_pc_function_start.
+	* infrun.c (wait_for_inferior): Same.
+
+	* gdb.texinfo: Documented new "step" and "next" behavior in
+	functions without line number information.
+
+Tue Dec 20 18:00:45 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* infcmd.c (step_1): Changed behavior of "step" or "next" in a
+	function witout line number information.  It now sets the step
+	range around the function (to single step out of it) using the
+	misc function vector, warns the user, and continues.
+
+	* symtab.c (find_pc_line): Zero "end" subsection of returned
+	symtab_and_line if no symtab found.
+
+Mon Dec 19 17:44:35 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* i386-pinsn.c (OP_REG): Added code from pace to streamline
+	disassembly and corrected types.
+	* i386-dep.c
+	(i386_follow_jump): Code added to follow byte and word offset
+	branches.
+	(i386_get_frame_setup): Expanded to deal with more wide ranging
+	function prologue.
+	(i386_frame_find_saved_regs, i386_skip_prologue): Changed to use
+	i386_get_frame_setup. 
+	
+
+Sun Dec 18 11:15:03 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h: Deleted definition of SUN4_COMPILER_BUG; was designed
+	to avoid something that I consider a bug in our code, not theirs,
+	and which I fixed earlier.  Also deleted definition of
+	CANNOT_USE_ARBITRARY_FRAME; no longer used anywhere.
+	FRAME_SPECIFICATION_DYADIC used instead.
+
+	* infrun.c (wait_for_inferior): On the sun 4, if a function
+	doesn't have a prologue, a next over it single steps into it.
+	This gets around the problem of a "call .stret4" at the end of
+	functions returning structures.
+	* m-sparc.h: Defined SUN4_COMPILER_FEATURE.
+
+	* main.c (copying_info): Seperated the last printf into two
+	printfs.  The 386 compiler will now handle it.
+
+	* i386-pinsn.c, i386-dep.c: Moved print_387_control_word,
+	print_387_status_word, print_387_status, and i386_float_info to
+	dep.c  Also included reg.h in dep.c.
+
+Sat Dec 17 15:31:38 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* main.c (source_command): Don't close instream if it's null
+	(indicating execution of a user-defined command).
+		 (execute_command): Set instream to null before executing
+		 commands and setup clean stuff to put it back on error.
+
+	* inflow.c (terminal_inferior): Went back to not checking the
+	ioctl returns; there are some systems when this will simply fail.
+	It seems that, on most of these systems, nothing bad will happen
+	by that failure.
+
+	* values.c (value_static_field): Fixed dereferencing of null
+	pointer. 
+
+	* i386-dep.c (i386_follow_jump): Modified to deal with
+	unconditional byte offsets also.
+
+	* dbxread.c (read_type): Fixed typo in function type case of switch.
+
+	* infcmd.c (run_command): Does not prompt to restart if command is
+	not from a tty.
+
+Fri Dec 16 15:21:58 1988  Randy Smith  (randy at calvin)
+
+	* gdb.texinfo: Added a third option under the "Cannot Insert
+	Breakpoints" workarounds.
+
+	* printcmd.c (display_command): Don't do the display unless there
+	is an active inferior; only set it.
+
+	* findvar.c (value_of_register): Added an error check for calling
+	this when the inferior isn't active and a core file isn't being
+	read. 
+
+	* config.gdb: Added reminder about modifying REGEX in the
+	makefile for the 386.
+
+	* i386-pinsn.c, i386-dep.c: Moved m-i386.h helper functions over
+	to i386-dep.c.b
+
+Thu Dec 15 14:04:25 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* README: Added a couple of notes about compiling gdb with itself.
+
+	* breakpoint.c (set_momentary_breakpoint): Only takes FRAME_FP of
+	frame if frame is non-zero.
+
+	* printcmd.c (print_scalar_formatted): Implemented /g size for
+	hexadecimal format on machines without an 8 byte integer type.  It
+	seems to be non-trivial to implement /g for other formats.
+	(decode_format): Allowed hexadecimal format to make it through /g
+	fileter. 
+
+Wed Dec 14 13:27:04 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* expread.y: Converted all calls to write_exp_elt from the parser
+	to calls to one of write_exp_elt_{opcode, sym, longcst, dblcst,
+	char, type, intern}.  Created all of these routines.  This gets
+	around possible problems in passing one of these things in one ear
+	and getting something different out the other.  Eliminated
+	SUN4_COMPILER_BUG ifdef's; they are now superfluous.
+
+	* symmisc.c (free_all_psymtabs): Reinited partial_symtab_list to 0.
+		    (_initialize_symmisc): Initialized both symtab_list and
+		    partial_symtab_list.
+
+	* dbxread.c (start_psymtab): Didn't allocate anything on
+	dependency list.
+	(end_psymtab): Allocate dependency list on psymbol obstack from
+	local list.
+	(add_psymtab_dependency): Deleted.
+	(read_dbx_symtab): Put dependency on local list if it isn't on it
+	already.
+
+	* symtab.c: Added definition of psymbol_obstack.
+	* symtab.h: Added declaration of psymbol_obstack.
+	* symmisc.c (free_all_psymtabs): Added freeing and
+	reinitionaliztion of psymbol_obstack.
+	* dbxread.c (free_all_psymbols): Deleted.
+		    (start_psymtab, end_psymtab,
+		    process_symbol_for_psymtab):  Changed most allocation
+		    of partial symbol stuff to be off of psymbol_obstack.
+
+	* symmisc.c (free_psymtab, free_all_psymtabs): Deleted
+	free_psymtab subroutine.
+
+	* symtab.h: Removed num_includes and includes from partial_symtab
+	structure; no longer needed now that all include files have their
+	own psymtab.
+	* dbxread.c (start_psymtab): Eliminated initialization of above.
+		    (end_psymtab): Eliminated finalization of above; get
+		    includes from seperate list.
+		    (read_dbx_symtab): Moved includes from psymtab list to
+		    their own list; included in call to end_psymtab.
+	* symmisc.c (free_psymtab): Don't free includes.
+
+Tue Dec 13 14:48:14 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* i386-pinsn.c: Reformatted entire file to correspond to gnu
+	software indentation conventions.
+
+	* sparc-dep.c (skip_prologue): Added capability of recognizign
+	stores of input register parameters into stack slots. 
+
+	* sparc-dep.c: Added an include of sparc-opcode.h.
+	* sparc-pinsn.c, sparc-opcode.h: Moved insn_fmt structures and
+	unions from pinsn.c to opcode.h.
+	* sparc-pinsn.c, sparc-dep.c (isabranch, skip_prologue): Moved
+	this function from pinsn.c to dep.c.
+
+	* Makefile: Put in warnings about compiling with gcc (non-ansi
+	include files) and compiling with shared libs on Sunos 4.0 (can't
+	debug something that's been compiled that way).
+
+	* sparc-pinsn.c: Put in a completely new file (provided by
+	Tiemann) to handle floating point disassembly, load and store
+	instructions, and etc. better.  Made the modifications this file
+	(ChangeLog) list for sparc-pinsn.c again.
+
+	* symtab.c (output_source_filename): Included "more" emulation hack.
+
+	* symtab.c (output_source_filename): Initialized COLUMN to 0.
+		   (sources_info): Modified to not print out a line for
+		   all of the include files within a partial symtab (since
+		   they have pst's of their own now).  Also modified to
+		   make a distinction between those pst's read in and
+		   those not.
+
+	* infrun.c: Included void declaration of single_step() if it's
+	going to be used.
+	* sparc-dep.c (single_step): Moved function previous to use of it.
+
+	* Makefile: Took removal of expread.tab.c out of make clean entry
+	and put it into a new "squeakyclean" entry.
+
+Mon Dec 12 13:21:02 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* sparc-pinsn.c (skip_prologue): Changed a struct insn_fmt to a
+	union insn_fmt.
+
+	* inflow.c (terminal_inferior): Checked *all* return codes from
+	ioctl's and fcntl's in routine.
+
+	* inflow.c (terminal_inferior): Added check for sucess of
+	TIOCSPGRP ioctl call.  Just notifies if bad.
+
+	* dbxread.c (symbol_file_command): Close was getting called twice;
+	once directly and once through cleanup.  Killed the direct call.  
+
+Sun Dec 11 19:40:40 1988  & Smith  (randy at hobbes.ai.mit.edu)
+
+	* valprint.c (val_print): Deleted spurious printing of "=" from
+	TYPE_CODE_REF case.
+
+Sat Dec 10 16:41:07 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c: Changed allocation of psymbols from using malloc and
+	realloc to using obstacks.  This means they aren't realloc'd out
+	from under the pointers to them.
+
+Fri Dec  9 10:33:24 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* sparc-dep.c inflow.c core.c expread.y command.c infrun.c
+	infcmd.c dbxread.c symmisc.c symtab.c printcmd.c valprint.c
+	values.c source.c stack.c findvar.c breakpoint.c blockframe.c
+	main.c: Various cleanups inspired by "gcc -Wall" (without checking
+	for implicit declarations).
+
+	* Makefile: Cleaned up some more.
+
+	* valops.c, m-*.h (FIX_CALL_DUMMY): Modified to take 5 arguments
+	as per what sparc needs (programming for a superset of needed
+	args).
+
+	* dbxread.c (process_symbol_for_psymtab): Modified to be slightly
+	more picky about what it puts on the list of things *not* to be
+	put on the misc function list.  When/if I shift everything over to
+	being placed on the misc_function_list, this will go away.
+
+	* inferior.h, infrun.c: Added fields to save in inferior_status
+	structure. 
+
+	* maketarfile: Deleted; functionality is in Makefile now.
+
+	* infrun.c (wait_for_inferior): Modified algorithm for determining
+	whether or not a single-step was through a subroutine call.  See
+	comments at top of file.
+
+	* dbxread.c (read_dbx_symtab): Made sure that the IGNORE_SYMBOL
+	macro would be checked during initial readin.
+
+	* dbxread.c (read_ofile_symtab): Added macro GCC_COMPILED_FLAG_SYMBOL
+	into dbxread.c to indicate what string in a local text symbol will
+	indicate a file compiled with gcc.  Defaults to "gcc_compiled.".
+
+Thu Dec  8 11:46:22 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h (FRAME_FIND_SAVED_REGS): Cleaned up a little to take
+	advantage of the new frame cache system.
+
+	* inferior.h, infrun.c, valops.c, valops.c, infcmd.c:  Changed
+	mechanism to save inferior status over calls to inferior (eg.
+	call_function); implemented save_inferior_info and
+	restore_inferior_info.
+
+	* blockframe.c (get_prev_frame): Simplified this by a direct call
+	to get_prev_frame_info.
+
+	* frame.h, stack.c, printcmd.c, m-sparc.h, sparc-dep.c: Removed
+	all uses of frame_id_from_addr.  There are short routines like it
+	still in frame_saved_pc (m-sparc.h) and parse_frame_spec
+	(stack.c).  Eventually the one in frame_saved_pc will go away.
+
+	* infcmd.c, sparc-dep.c: Implemented a new mechanism for
+	re-selecting the selected frame on return from a call.
+
+	* blockframe.c, stack.c, findvar.c, printcmd.c, m-*.h:  Changed
+	all routines and macros that took a "struct frame_info" as an
+	argument to take a "struct frame_info *".  Routines: findarg,
+	framechain, print_frame_args, FRAME_ARGS_ADDRESS,
+	FRAME_STRUCT_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS,
+	FRAME_FIND_SAVED_REGS.
+
+	* frame.h, stack.c, printcmd.c, infcmd.c, findvar.c, breakpoint.c,
+	blockframe.c, xgdb.c, i386-pinsn.c, gld-pinsn.c, m-umax.h,
+	m-sun2.h, m-sun3.h, m-sparc.h, m-pn.h, m-npl.h, m-news.h,
+	m-merlin.h, m-isi.h, m-i386.h, m-hp9k320.h:  Changed routines to
+	use "struct frame_info *" internally.
+
+Wed Dec  7 12:07:54 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* frame.h, blockframe.c, m-sparc.h, sparc-dep.c: Changed all calls
+	to get_[prev_]frame_cache_item to get_[prev_]frame_info.
+
+	* blockframe.c: Elminated get_frame_cache_item and
+	get_prev_frame_cache_item; functionality now taken care of by
+	get_frame_info and get_prev_frame_info.
+
+	* blockframe.c: Put allocation on an obstack and eliminated fancy
+	reallocation routines, several variables, and various nasty
+	things. 
+
+	* frame.h, stack.c, infrun.c, blockframe.c, sparc-dep.c: Changed
+	type FRAME to be a typedef to "struct frame_info *".  Had to also
+	change routines that returned frame id's to return the pointer
+	instead of the cache index.
+
+	* infcmd.c (finish_command): Used proper method of getting from
+	function symbol to start of function.  Was treating a symbol as a
+	value. 
+
+	* blockframe.c, breakpoint.c, findvar.c, infcmd.c, stack.c,
+	xgdb.c, i386-pinsn.c, frame.h, m-hp9k320.h, m-i386.h, m-isi.h,
+	m-merlin.h, m-news.h, m-npl.h, m-pn.h, m-sparc.h, m-sun2.h,
+	m-sun3.h, m-umax.h: Changed get_frame_info and get_prev_frame_info
+	to return pointers instead of structures.
+
+	* blockframe.c (get_pc_function_start): Modified to go to misc
+	function table instead of bombing if pc was in a block without a
+	containing function.
+
+	* coffread.c: Dup'd descriptor passed to read_coff_symtab and
+	fdopen'd it so that there wouldn't be multiple closes on the same
+	fd.  Also put (fclose, stream) on the cleanup list.
+
+	* printcmd.c, stack.c: Changed print_frame_args to take a
+	frame_info struct as argument instead of the address of the args
+	to the frame.
+
+	* m-i386.h (STORE_STRUCT_RETURN): Decremented sp by sizeof object
+	to store (an address) rather than 1.
+
+	* dbxread.c (read_dbx_symtab): Set first_object_file_end in
+	read_dbx_symtab (oops).
+
+	* coffread.c (fill_in_vptr_fieldno): Rewrote TYPE_BASECLASS as
+	necessary. 
+
+Tue Dec  6 13:03:43 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* coffread.c: Added fake support for partial_symtabs to allow
+	compilation and execution without there use.
+	* inflow.c: Added a couple of minor USG mods.
+	* munch: Put in appropriate conditionals so that it would work on
+	USG systems.
+	* Makefile: Made regex.* handled same as obstack.*; made sure tar
+	file included everything I wanted it to include (including
+	malloc.c).
+
+	* dbxread.c (end_psymtab): Create an entry in the
+	partial_symtab_list for each subfile of the .o file just read in.
+	This allows a "list expread.y:10" to work when we haven't read in
+	expread.o's symbol stuff yet.
+
+	* symtab.h, dbxread.c (psymtab_to_symtab): Recognize pst->ldsymlen
+	== 0 as indicating a dummy psymtab, only in existence to cause the
+	dependency list to be read in.
+
+	* dbxread.c (sort_symtab_syms): Elminated reversal of symbols to
+	make sure that register debug symbol decls always come before
+	parameter symbols.  After mod below, this is not needed.
+
+	* symtab.c (lookup_block_symbol): Take parameter type symbols
+	(LOC_ARG or LOC_REGPARM) after any other symbols which match.
+
+	* dbxread.c (read_type): When defining a type in terms of some
+	other type and the other type is supposed to have a pointer back
+	to this specific kind of type (pointer, reference, or function),
+	check to see if *that* type has been created yet.  If it has, use
+	it and fill in the appropriate slot with a pointer to it.
+
+Mon Dec  5 11:25:04 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* symmisc.c: Eliminated existence of free_inclink_symtabs and
+	init_free_inclink_symtabs; they aren't called from anywhere, and
+	if they were they could disrupt gdb's data structure badly
+	(elimination of struct type's which values that stick around past
+	elimination of inclink symtabs).
+
+	* dbxread.c (symbol_file_command): Fixed a return pathway out of
+	the routine to do_cleanups before it left.
+
+	* infcmd.c (set_environment_command), gdb.texinfo: Added
+	capability to set environmental variable values to null.
+
+	* gdb.texinfo: Modified doc on "break" without args slightly.
+
+Sun Dec  4 17:03:16 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c (symbol_file_command): Added check; if there weren't
+	any debugging symbols in the file just read, the user is warned.
+
+	* infcmd.c: Commented set_environment_command (a little).
+
+	* createtags: Cleaned up and commented.
+
+	* Makefile: Updated dependency list and cleaned it up somewhat
+	(used macros, didn't make .o files depend on .c files, etc.)
+
+Fri Dec  2 11:44:46 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* value.h, values.c, infcmd.c, valops.c, m-i386.h, m-sparc.h,
+	m-merlin.h, m-npl.h, m-pn.h, m-umax.h, m-vax.h, m-hp9k320.h,
+	m-isi.h, m-news.h, m-sun2.h, m-sun3.h:  Cleaned up dealings with
+	functions returning structures.  Specifically: Added a function
+	called using_struct_return which indicates whether the function
+	being called is using the structure returning conventions or it is
+	using the value returning conventions on that machine.  Added a
+	macro, STORE_STRUCT_RETURN to store the address of the structure
+	to be copied into wherever it's supposed to go, and changed
+	call_function to handle all of this correctly.
+
+	* symseg.h, symtab.h, dbxread.c: Added hooks to recognize an
+	N_TEXT symbol with name "*gcc-compiled*" as being a flag
+	indicating that a file had been compiled with gcc and setting a
+	flag in all blocks produced during processing of that file.
+
+Thu Dec  1 13:54:29 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h (PUSH_DUMMY_FRAME): Saved 8 less than the current pc,
+	as POP_FRAME and sparc return convention restore the pc to 8 more
+	than the value saved.
+
+	* valops.c, printcmd.c, findvar.c, value.h: Added the routine
+	value_from_register, to access a specific register of a specific
+	frame as containing a specific type, and used it in read_var_value
+	and print_frame_args.
+
+Wed Nov 30 17:39:50 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* dbxread.c (read_number): Will accept either the argument passed
+	as an ending character, or a null byte as an ending character.
+
+	* Makefile, createtags: Added entry to create tags for gdb
+	distribution which will make sure currently configured machine
+	dependent files come first in the list.
+
+Wed Nov 23 13:27:34 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* stack.c, infcmd.c, sparc-dep.c: Modified record_selected_frame
+	to work off of frame address.
+
+	* blockframe.c (create_new_frame, get_prev_frame_cache_item):
+	Added code to reset pointers within frame cache if it must be
+	realloc'd. 
+
+	* dbxread.c (read_dbx_symtab): Added in optimization comparing
+	last couple of characters instead of first couple to avoid
+	strcmp's in read_dbx_symtab (recording extern syms in misc
+	functions or not).  1 call to strlen is balanced out by many fewer
+	calls to strcmp.
+
+Tue Nov 22 16:40:14 1988  Randall Smith  (randy at cream-of-wheat.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Took out optimization for ignoring
+	LSYM's; was disallowing typedefs.  Silly me.  
+
+	* Checkpointed distribution (mostly for sending to Tiemann).
+
+	* expression.h: Added BINOP_MIN and BINOP_MAX operators for C++.
+	* symseg.h: Included flags for types having destructors and
+		constructors, and flags being defined via public and via
+		virtual paths.  Added fields NEXT_VARIANT, N_BASECLASSES,
+		and BASECLASSES to this type (tr: Changed types from
+		having to be derived from a single baseclass to a multiple
+		base class).
+	* symtab.h: Added macros to access new fields defined in symseg.h.
+		Added decl for lookup_basetype_type.
+	* dbxread.c 
+	(condense_addl_misc_bunches): Function added to condense the misc
+		function bunches added by reading in a new .o file.
+	(read_addl_syms): Function added to read in symbols
+		from a new .o file (incremental linking).
+	(add_file_command): Command interface function to indicate
+		incrmental linking of a new .o file; this now calls
+		read_addl_syms and condense_addl_misc_bunches.
+	(define_symbol): Modified code to handle types defined from base
+		types which were not known when the derived class was
+		output.
+	(read_struct_type): Modified to better handle description of
+		struct types as derived types.  Possibly derived from
+		several different base classes.  Also added new code to
+		mark definitions via virtual paths or via public paths.
+		Killed seperate code to handle classes with destructors
+		but without constructors and improved marking of classes
+		as having destructors and constructors.
+	* infcmd.c: Modified call to val_print (one more argument).
+	* symtab.c (lookup_member_type): Modified to deal with new
+		structure in symseg.h.
+	(lookup_basetype_type): Function added to find or construct a type
+		?derived? from the given type.
+	(decode_line_1): Modified to deal with new type data structures.
+		Modified to deal with new number of args for
+		decode_line_2.
+	(decode_line_2): Changed number of args (?why?).
+	(init_type): Added inits for new C++ fields from
+		symseg.h.
+	*valarith.c
+	(value_x_binop, value_binop): Added cases for BINOP_MIN &
+		BINOP_MAX.
+	* valops.c
+	(value_struct_elt, check_field,	value_struct_elt_for_address):
+		Changed to deal with multiple possible baseclasses.
+	(value_of_this): Made SELECTED_FRAME an extern variable.
+	* valprint.c
+	(val_print): Added an argument DEREF_REF to dereference references
+		automatically, instead of printing them like pointers.
+		Changed number of arguments in recursive calls to itself.
+		Changed to deal with varibale numbers of base classes.
+	(value_print): Changed number of arguments to val_print.  Print
+		type of value also if value is a reference.
+	(type_print_derivation_info): Added function to print out
+		derivation info a a type.
+	(type_print_base): Modified to use type_print_derivation_info and
+		to handle multiple baseclasses.
+	
+Mon Nov 21 10:32:07 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* inflow.c (term_status_command): Add trailing newline to output. 
+
+	* sparc-dep.c (do_save_insn, do_restore_insn): Saved
+	"stop_registers" over the call for the sake of normal_stop and
+	run_stack_dummy.
+
+	* m-sparc.h (EXTRACT_RETURN_VALUE): Put in parenthesis to force
+	addition of 8 to the int pointer, not the char pointer.
+
+	* sparc-pinsn.c (print_addr1): Believe that I have gotten the
+	syntax right for loads and stores as adb does it.
+
+	* symtab.c (list_symbols): Turned search for match on rexegp into
+	a single loop.
+
+	* dbxread.c (psymtab_to_symtab): Don't read it in if it's already
+	been read in.
+
+	* dbxread.c (psymtab_to_symtab): Changed error to fatal in
+	psymtab_to_symtab. 
+
+	* expread.y (parse_number): Fixed bug which treated 'l' at end of
+	number as '0'.
+
+Fri Nov 18 13:57:33 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab, process_symbol_for_psymtab): Was
+	being foolish and using pointers into an array I could realloc.
+	Converted these pointers into integers.
+
+Wed Nov 16 11:43:10 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h (POP_FRAME): Made the new frame be PC_ADJUST of the
+	old frame.
+
+	* i386-pinsn.c, m-hp9k320.h, m-isi.h, m-merlin.h, m-news.h,
+	m-npl.h, m-pn.h, m-sparc.h, m-sun2.h, m-sun3.h, m-umax.h, m-vax.h:
+	Modified POP_FRAME to use the current frame instead of
+	read_register (FP_REGNUM) and to flush_cached_frames before
+	setting the current frame.  Also added a call to set the current
+	frame in those POP_FRAMEs that didn't have it.
+
+	* infrun.c (wait_for_inferior): Moved call to set_current_frame up
+	to guarrantee that the current frame will always be set when a
+	POP_FRAME is done.  
+
+	* infrun.c (normal_stop): Added something to reset the pc of the
+	current frame (was incorrect because of DECR_PC_AFTER_BREAK).
+
+	* valprint.c (val_print): Changed to check to see if a string was
+	out of bounds when being printed and to indicate this if so.
+
+	* convex-dep.c (read_inferior_memory): Changed to return the value
+	of errno if the call failed (which will be 0 if the call
+	suceeded). 
+
+Tue Nov 15 10:17:15 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* infrun.c (wait_for_inferior): Two changes: 1) Added code to
+	not trigger the step breakpoint on recursive calls to functions
+	without frame info, and 2) Added calls to distinguish recursive
+	calls within a function without a frame (which next/nexti might
+	wish to step over) from jumps to the beginning of a function
+	(which it generally doesn't).
+
+	* m-sparc.h (INIT_EXTRA_FRAME_INFO): Bottom set correctly for leaf
+	parents. 
+
+	* blockframe.c (get_prev_frame_cache_item): Put in mod to check
+	for a leaf node (by presence or lack of function prologue).  If
+	there is a leaf node, it is assumed that SAVED_PC_AFTER_CALL is
+	valid.  Otherwise, FRAME_SAVED_PC or read_pc is used.
+
+	* blockframe.c, frame.h: Did final deletion of unused routines and
+	commented problems with getting a pointer into the frame cache in
+	the frame_info structure comment.
+
+	* blockframe.c, frame.h, stack.c: Killed use of
+	frame_id_from_frame_info; used frame_id_from_addr instead.
+
+	* blockframe.c, frame.h, stack.c, others (oops): Combined stack
+	cache and frame info structures.
+
+	* blockframe.c, sparc-dep.c, stack.c: Created the function
+	create_new_frame and used it in place of bad calls to
+	frame_id_from_addr. 
+
+	* blockframe.c, inflow.c, infrun.c, i386-pinsn.c, m-hp9k320.h,
+	m-npl.h, m-pn.h, m-sparc.h, m-sun3.h, m-vax.h, default-dep.c,
+	convex-dep.c, gould-dep.c, hp9k320-dep.c, news-dep.c, sparc-dep.c,
+	sun3-dep.c, umax-dep.c: Killed use of
+	set_current_Frame_by_address.  Used set_current_frame
+	(create_new_frame...) instead.
+
+	* frame.h: Killed use of FRAME_FP_ID.
+
+	* infrun.c, blockframe.c: Killed select_frame_by_address.  Used
+	select_frame (get_current_frame (), 0) (which was correct in all
+	cases that we need to worry about.
+
+Mon Nov 14 14:19:32 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* frame.h, blockframe.c, stack.c, m-sparc.h, sparc-dep.c: Added
+	mechanisms to deal with possible specification of frames
+	dyadically. 
+
+Sun Nov 13 16:03:32 1988  Richard Stallman  (rms at sugar-bombs.ai.mit.edu)
+
+	* ns32k-opcode.h: Add insns acbw, acbd.
+
+Sun Nov 13 15:09:58 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* breakpoint.c: Changed breakpoint structure to use the address of
+	a given frame (constant across inferior runs) as the criteria for
+	stopping instead of the frame ident (which varies across inferior
+	calls). 
+
+Fri Nov 11 13:00:22 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* gld-pinsn.c (findframe): Modified to work with the new frame
+	id's.  Actually, it looks as if this routine should be called with
+	an address anyway.
+
+	* findvar.c (find_saved_register): Altered bactrace loop to work
+	off of frames and not frame infos.
+
+	* frame.h, blockframe.c, stack.c, sparc-dep.c, m-sparc.h: Changed
+	FRAME from being the address of the frame to being a simple ident
+	which is an index into the frame_cache_item list.
+	* convex-dep.c, default-dep.c, gould-dep.c, hp9k320-dep.c,
+	i386-pinsn.c, inflow.c, infrun.c, news-dep.c, sparc-dep.c,
+	sun3-dep.c, umax-dep.c, m-hp9k320.h, m-npl.h, m-pn.h, m-sparc.h,
+	m-sun3.h, m-vax.h: Changed calls of the form set_current_frame
+	(read_register (FP_REGNUM)) to set_current_frame_by_address (...). 
+
+Thu Nov 10 16:57:57 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* frame.h, blockframe.c, gld-pinsn.c, sparc-dep.c, stack.c,
+	infrun.c, findvar.c, m-sparc.h: Changed the FRAME type to be
+	purely an identifier, using FRAME_FP and FRAME_FP_ID to convert
+	back and forth between the two.  The identifier is *currently*
+	still the frame pointer value for that frame.
+
+Wed Nov  9 17:28:14 1988  Chris Hanson  (cph at kleph)
+
+	* m-hp9k320.h (FP_REGISTER_ADDR): Redefine this to return
+	difference between address of given FP register, and beginning of
+	`struct user' that it occurs in.
+
+	* hp9k320-dep.c (core_file_command): Fix sign error in size
+	argument to myread.  Change buffer argument to pointer; was
+	copying entire structure.
+	(fetch_inferior_registers, store_inferior_registers): Replace
+	occurrences of `FP_REGISTER_ADDR_DIFF' with `FP_REGISTER_ADDR'.
+	Flush former definition.
+
+Wed Nov  9 12:11:37 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* xgdb.c: Killed include of initialize.h.
+
+	* Pulled in xgdb.c from the net.
+
+	* Checkpointed distribution (to provide to 3b2 guy).
+
+	* coffread.c, dbxread.c, symmisc.c, symtab.c, symseg.h: Changed
+	format of table of line number--pc mapping information.  Can
+	handle negative pc's now.
+
+	* command.c: Deleted local copy of savestring; code in utils.c is
+	identical. 
+
+Tue Nov  8 11:12:16 1988  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* gdb.texinfo: Added documentation for shell escape.
+
+Mon Nov  7 12:27:16 1988  Randall Smith  (randy at sugar-bombs.ai.mit.edu)
+
+	* command.c: Added commands for shell escape.
+
+	* core.c, dbxread.c: Added ROBOTUSSIN mods.
+
+	* Checkpointed distribution.
+
+	* printcmd.c (x_command): Yanked error if there is no memory to
+	examine (could be looking at executable straight).
+
+	* sparc-pinsn.c (print_insn): Amount to leftshift sethi imm by is
+	now 10 (matches adb in output).
+
+	* printcmd.c (x_command): Don't attempt to set $_ & $__ if there
+	is no last_examine_value (can happen if you did an x/0).
+
+Fri Nov  4 13:44:49 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* printcmd.c (x_command): Error if there is no memory to examine.
+
+	* gdb.texinfo: Added "cont" to the command index.
+
+	* sparc-dep.c (do_save_insn): Fixed typo in shift amount.
+
+	* m68k-opcode.h: Fixed opcodes for 68881.
+
+	* breakpoint.c, infcmd.c, source.c: Changed defaults in several
+	places for decode_line_1 to work off of the default_breakpoint_*
+	values instead of current_source_* values (the current_source_*
+	values are off by 5 or so because of listing defaults).
+
+	* stack.c (frame_info): ifdef'd out FRAME_SPECIFCATION_DYADIC in
+	the stack.c module.  If I can't do this right, I don't want to do
+	it at all.  Read the comment there for more info.
+
+Mon Oct 31 16:23:06 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* gdb.texinfo: Added documentation on the "until" command.
+
+Sat Oct 29 17:47:10 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* breakpoint.c, infcmd.c: Added UNTIL_COMMAND and subroutines of
+	it. 
+
+	* breakpoint.c, infcmd.c, infrun.c: Added new field to breakpoint
+	structure (silent, indicating a silent breakpoint), and modified
+	breakpoint_stop_status and things that read it's return value to
+	understand it.
+
+Fri Oct 28 17:45:33 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c, symmisc.c: Assorted speedups for readin, including
+	special casing most common symbols, and doing buffering instead of
+	calling malloc.  
+
+Thu Oct 27 11:11:15 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* stack.c, sparc-dep.c, m-sparc.h: Modified to allow "info frame"
+	to take two arguments on the sparc and do the right thing with
+	them. 
+
+	* dbxread.c (read_dbx_symtab, process_symbol_for_psymtab): Put
+	stuff to put only symbols that didn't have debugging info on the
+	misc functions list back in.
+
+Wed Oct 26 10:10:32 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* valprint.c (type_print_varspec_suffix): Added check for
+	TYPE_LENGTH(TYPE_TARGET_TYPE(type)) > 0 to prevent divide by 0.
+
+	* printcmd.c (print_formatted): Added check for VALUE_REPEATED;
+	value_print needs to be called for that.
+
+	* infrun.c (wait_for_inferior): Added break when you decide to
+	stop on a null function prologue rather than continue stepping.
+
+	* m-sun3.h: Added explanatory comment to REGISTER_RAW_SIZE.
+
+	* expread.y (parse_c_1): Initialized paren_depth for each parse.
+
+Tue Oct 25 14:19:38 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* valprint.c, coffread.c, dbxread.c: Enum constant values in enum
+	type now accessed through TYPE_FIELD_BITPOS.
+
+	* dbxread.c (process_symbol_for_psymtab): Added code to deal with
+	possible lack of a ":" in a debugging symbol (do nothing).
+
+	* symtab.c (decode_line_1): Added check in case of all numbers for
+	complete lack of symbols.
+
+	* source.c (select_source_symtab): Made sure that this wouldn't
+	bomb on complete lack of symbols.
+
+Mon Oct 24 12:28:29 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h, findvar.c: Ditched REGISTER_SAVED_UNIQUELY and based
+	code on REGISTER_IN_WINDOW_P and HAVE_REGISTER_WINDOWS.  This will
+	break when we find a register window machine which saves the
+	window registers within the context of an inferior frame.
+
+	* sparc-dep.c (frame_saved_pc): Put PC_ADJUST return back in for
+	frame_saved_pc.  Seems correct.
+
+	* findvar.c, m-sparc.h: Created the macro REGISTER_SAVED_UNIQUELY
+	to handle register window issues (ie. that find_saved_register
+	wasn't checking the selected frame itself for shit). 
+
+	* sparc-dep.c (core_file_command): Offset target of o & g register
+	bcopy by 1 to hit correct registers.
+
+	* m-sparc.h: Changed STACK_END_ADDR.
+
+Sun Oct 23 19:41:51 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* sparc-dep.c (core_file_command): Added in code to get the i & l
+	registers from the stack in the corefile, and blew away some wrong
+	code to get i & l from inferior.
+
+Fri Oct 21 15:09:19 1988  Randall Smith  (randy at apple-gunkies.ai.mit.edu)
+
+	* m-sparc.h (PUSH_DUMMY_FRAME): Saved the value of the RP register
+	in the location reserved for i7 (in the created frame); this way
+	the rp value won't get lost.  The pc (what we put into the rp in
+	this routine) gets saved seperately, so we loose no information.
+
+	* sparc-dep.c (do_save_insn & do_restore_insn): Added a wrapper to
+	preserve the proceed status state variables around each call to
+	proceed (the current frame was getting munged because this wasn't
+	being done).
+
+	* m-sparc.h (FRAME_FIND_SAVED_REGS): Fix bug: saved registers
+	addresses were being computed using absolute registers number,
+	rather than numbers relative to each group of regs.
+
+	* m-sparc.h (POP_FRAME): Fixed a bug (I hope) in the context
+	within which saved reg numbers were being interpetted.  The
+	values to be restored were being gotten in the inferior frame, and
+	the restoring was done in the superior frame.  This means that i
+	registers must be restored into o registers.
+
+	* sparc-dep.c (do_restore_insn): Modified to take a pc as an
+	argument, instead of a raw_buffer.  This matches (at least it
+	appears to match) usage from POP_FRAME, which is the only place
+	from which do_restore_insn is called.
+
+	* sparc-dep.c (do_save_insn and do_restore_insn): Added comments.
+
+	* m-sparc.h (FRAME_FIND_SAVED_REGS): Modified my code to find the
+	save addresses of out registers to use the in regs off the stack
+	pointer when the current frame is 1 from the innermost.
+
+Thu Oct 20 13:56:15 1988  & Smith  (randy at hobbes.ai.mit.edu)
+
+	* blockframe.c, m-sparc.h: Removed code associated with
+	GET_PREV_FRAME_FROM_CACHE_ITEM.  This code was not needed for the
+	sparc; you can always find the previous frames fp from the fp of
+	the current frame (which is the sp of the previous).  It's getting
+	the information associated with a given frame (ie. saved
+	registers) that's a bitch, because that stuff is saved relative to
+	the stack pointer rather than the frame pointer.
+
+	* m-sparc.h (GET_PREV_FRAME_FROM_CACHE_ITEM): Modified to return
+	the frame pointer of the previous frame instead of the stack
+	pointer of same.
+
+	* blockframe.c (flush_cached_frames): Modified call to
+	obstack_free to free back to frame_cache instead of back to zero.
+	This leaves the obstack control structure in finite state (and
+	still frees the entry allocated at frame_cache).
+
+Sat Oct 15 16:30:47 1988  & Smith  (randy at tartarus.uchicago.edu)
+
+	* valops.c (call_function): Suicide material here.  Fixed a typo;
+	CALL_DUMMY_STACK_ADJUST was spelled CAll_DUMMY_STACK_ADJUST on
+	line 530 of the file.  This cost me three days.  I'm giving up
+	typing for lent.
+
+Fri Oct 14 15:10:43 1988  & Smith  (randy at tartarus.uchicago.edu)
+
+	* m-sparc.h: Corrected a minor mistake in the dummy frame code
+	that was getting the 5th argument and the first argument from the
+	same place.
+
+Tue Oct 11 11:49:33 1988  & Smith  (randy at tartarus.uchicago.edu)
+
+	* infrun.c: Made stop_after_trap and stop_after_attach extern
+	instead of static so that code which used proceed from machine
+	dependent files could fiddle with them.
+
+	* blockframe.c, frame.h, sparc-dep.c, m-sparc.h: Changed sense of
+	->prev and ->next in struct frame_cache_item to fit usage in rest
+	of gdb (oops).
+
+Mon Oct 10 15:32:42 1988  Randy Smith  (randy at gargoyle.uchicago.edu)
+
+	* m-sparc.h, sparc-dep.c, blockframe.c, frame.h: Wrote
+	get_frame_cache_item.  Modified FRAME_SAVED_PC and frame_saved_pc
+	to take only one argument and do the correct thing with it.  Added
+	the two macros I recently defined in blockframe.c to m-sparc.h.
+	Have yet to compile this thing on a sparc, but I've now merged in
+	everything that I received from tiemann, either exactly, or simply
+	effectively. 
+
+	* source.c: Added code to allocated space to sals.sals in the case
+	where no line was specified.
+
+	* blockframe.c, infrun.c: Modified to cache stack frames requested
+	to minimize accesses to subprocess.
+
+Tue Oct  4 15:10:39 1988  Randall Smith  (randy at cream-of-wheat.ai.mit.edu)
+
+	* config.gdb: Added sparc.
+
+Mon Oct  3 23:01:22 1988  Randall Smith  (randy at cream-of-wheat.ai.mit.edu)
+
+	* Makefile, blockframe.c, command.c, core.c, dbxread.c, defs.h,
+	expread.y, findvar.c, infcmd.c, inflow.c, infrun.c, sparc-pinsn.c,
+	m-sparc.h, sparc-def.c, printcmd.c, stack.c, symmisc.c, symseg.h,
+	valops.c, values.c: Did initial merge of sparc port.  This will
+	not compile; have to do stack frame caching and finish port.
+
+	* inflow.c, gdb.texinfo: `tty' now resets the controling terminal. 
+
+Fri Sep 30 11:31:16 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* inferior.h, infcmd.c, infrun.c: Changed the variable
+	stop_random_signal to stopped_by_random signal to fit in better
+	with name conventions (variable is not a direction to the
+	proceed/resume set; it is information from it).
+
+Thu Sep 29 13:30:46 1988  Randall Smith  (randy at cream-of-wheat.ai.mit.edu)
+
+	* infcmd.c (finish_command): Value type of return value is now
+	whatever the function returns, not the type of the function (fixed
+	a bug in printing said value).
+
+	* dbxread.c (read_dbx_symtab, process_symbol_for_psymtab):
+	Put *all* global symbols into misc_functions.  This is what was
+	happening anyway, and we need it for find_pc_misc_function.
+
+	** This was eventually taken out, but I didn't mark it in the
+	ChangeLog.  Oops.
+
+	* dbxread.c (process_symbol_for_psymtab): Put every debugger
+	symbol which survives the top case except for constants on the
+	symchain.  This means that all of these *won't* show up in misc
+	functions (this will be fixed once I make sure it's broken the way
+	it's supposed to be).
+
+	* dbxread.c: Modified placement of debugger globals onto the hash
+	list; now we exclude the stuff after the colon and don't skip the
+	first character (debugger symbols don't have underscores).
+
+	* dbxread.c: Killed debuginfo stuff with ifdef's.
+
+Wed Sep 28 14:31:51 1988  Randall Smith  (randy at cream-of-wheat.ai.mit.edu)
+
+	* symtab.h, dbxread.c: Modified to deal with BINCL, EINCL, and
+	EXCL symbols produced by the sun loader by adding a list of
+	pre-requisite partial_symtabs that each partial symtab needs.
+
+	* symtab.h, dbxread.c, symtab.c, symmisc.c: Modified to avoid
+	doing a qsort on the local (static) psymbols for each file to
+	speed startup.  This feature is not completely debugged, but it's
+	inclusion has forced the inclusion of another feature (dealing
+	with EINCL's, BINCL's and EXCL's) and so I'm going to go in and
+	deal with them.
+
+	* dbxread.c (process_symbol_for_psymtab): Made sure that the class
+	of the symbol made it into the partial_symbol entry.
+
+Tue Sep 27 15:10:26 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c: Fixed bug; init_psymbol_list was not being called
+	with the right number of arguments (1).
+
+	* dbxread.c: Put ifdef's around N_MAIN, N_M2C, and N_SCOPE to
+	allow compilation on a microvax.
+
+	* config.gdb: Modified so that "config.gdb vax" would work.
+
+	* dbxread.c, symtab.h, symmisc.h, symtab.c, source.c: Put in many
+	and varied hacks to speed up gdb startup including: A complete
+	rewrite of read_dbx_symtab, a modification of the partial_symtab
+	data type, deletion of select_source_symtab from
+	symbol_file_command, and optimiztion of the call to strcmp in
+	compare_psymbols. 
+
+Thu Sep 22 11:08:54 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* dbxread.c (psymtab_to_symtab): Removed call to
+	init_misc_functions. 
+
+	* dbxread.c: Fixed enumeration type clash (used enum instead of
+	integer constant).
+
+	* breakpoint.c: Fixed typo; lack of \ at end of line in middle of
+	string constant. 
+
+	* symseg.h: Fixed typo; lack of semicolon after structure
+	definition. 
+
+	* command.c, breakpoint.c, printcmd.c: Added cmdlist editing
+	functions to add commands with the abbrev flag set.  Changed
+	help_cmd_list to recognize this flag and modified unset,
+	undisplay, and enable, disable, and delete breakpoints to have
+	this flag set.
+
+Wed Sep 21 13:34:19 1988  Randall Smith  (randy at plantaris.ai.mit.edu)
+
+	* breakpoint.c, infcmd.c, gdb.texinfo: Created "unset" as an alias
+	for delete, and changed "unset-environment" to be the
+	"environment" subcommand of "delete".
+
+	* gdb.texinfo, valprint.c: Added documentation in the manual for
+	breaking the set-* commands into subcommands of set.  Changed "set
+	maximum" to "set array-max".
+
+	* main.c, printcmd.c, breakpoint.c: Moved the declaration of
+	command lists into main and setup a function in main initializing
+	them to guarrantee that they would be initialized before calling
+	any of the individual files initialize routines.
+
+	* command.c (lookup_cmd): A null string subcommand is treated as
+	an unknown subcommand rather than an ambiguous one (eg. "set $x =
+	1" will now work).
+
+	* infrun.c (wait_for_inferior): Put in ifdef for Sony News in
+	check for trap by INNER_THAN macro.
+
+	* eval.c (evaluate_subexp): Put in catch to keep the user from
+	attempting to call a non function as a function.
+
+Tue Sep 20 10:35:53 1988  Randall Smith  (randy at oatmeal.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Installed code to keep track of
+	which global symbols did not have debugger symbols refering to
+	them, and recording these via record_misc_function.
+
+	* dbxread.c: Killed code to check for extra global symbols in the
+	debugger symbol table.
+
+	* printcmd.c, breakpoint.c: Modified help entries for several
+	commands to make sure that abbreviations were clearly marked and
+	that the right commands showed up in the help listings.
+
+	* main.c, command.c, breakpoint.c, infcmd.c, printcmd.c,
+	valprint.c, defs.h: Modified help system to allow help on a class
+	name to show subcommands as well as commands and help on a command
+	to show *all* subcommands of that command.
+
+Fri Sep 16 16:51:19 1988  Randall Smith  (randy at gluteus.ai.mit.edu)
+
+	* breakpoint.c (_initialize_breakpoint): Made "breakpoints"
+	subcommands of enable, disable, and delete use class 0 (ie. they
+	show up when you do a help xxx now).
+
+	* infcmd.c,printcmd,c,main.c,valprint.c: Changed the set-*
+	commands into subcommands of set.  Created "set variable" for use
+	with variables whose names might conflict with other subcommands.
+
+	* blockframe.c, dbxread.c, coffread.c, expread.y, source.c:
+	Fixed mostly minor (and one major one in block_for_pc) bugs
+	involving checking the partial_symtab_list when a scan through the
+	symtab_list fails.
+
+Wed Sep 14 12:02:05 1988  Randall Smith  (randy at sugar-smacks.ai.mit.edu)
+
+	* breakpoint.c, gdb.texinfo: Added enable breakpoints, disable
+	breakpoints and delete breakpoints as synonyms for enable,
+	disable, and delete.  This seemed reasonable because of the
+	immeninent arrival of watchpoints & etc.
+
+	* gdb.texinfo: Added enable display, disable display, and delete
+	display to manual.
+
+Tue Sep 13 16:53:56 1988  Randall Smith  (randy at sugar-smacks.ai.mit.edu)
+
+	* inferior.h, infrun.c, infcmd.c: Added variable
+	stop_random_signal to indicate when a proceed had been stopped by
+	an unexpected signal.  Used this to determine (in normal_stop)
+	whether the current display point should be deleted.
+
+	* valops.c: Fix to value_ind to check for reference before doing a
+	COERCE_ARRAY.
+
+Sun Jul 31 11:42:36 1988  Richard Stallman  (rms at frosted-flakes.ai.mit.edu)
+
+	* breakpoint.c (_initialize_breakpoint): Clean up doc for commands
+	that can now apply also to auto-displays.
+
+	* coffread.c (record_line): Corrected a spazz in editing.
+	Also removed the two lines that assume line-numbers appear
+	only in increasing order.
+
+Tue Jul 26 22:19:06 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* expression.h, eval.c, expprint.c, printcmd.c, valarith.c,
+	valops.c, valprint.c, values.c, m-*.h: Changes for evaluating and
+	displaying 64-bit `long long' integers.  Each machine must define
+	a LONGEST type, and a BUILTIN_TYPE_LONGEST.
+
+	* symmisc.c: (print_symtab) check the status of the fopen and call
+	perror_with_name if needed.
+
+Thu Jul 21 00:56:11 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* Convex: core.c: changes required by Convex's SOFF format were
+	isolated in convex-dep.c.
+
+Wed Jul 20 21:26:10 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* coffread.c, core.c, expread.y, i386-pinsn.c, infcmd.c, inflow.c,
+	infrun.c, m-i386.h, main.c, remote.c, source.c, valops.c:
+	Improvements for the handling of the i386 and other machines
+	running USG.  (Several of these files just needed extra header files
+	such as types.h.) utils.c: added bcopy, bcmp, bzero, getwd, list
+	of signals, and queue routines for USG systems.  Added vfork macro
+	to i386
+
+	* printcmd.c, breakpoint.c: New commands to enable/disable
+	auto-displays.  Also `delete display displaynumber' works like
+	`undisplay displaynumber'.
+
+Tue Jul 19 02:17:18 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* coffread.c: (coff_lookup_type)  Wrong portion of type_vector was
+	being bzero'd after type_vector was reallocated.
+
+	* printcmd.c: (delete_display) Check for a display chain before
+	attempting to delete a display.
+
+	* core.c, *-dep.c (*-infdep moved to *-dep): machine-dependent
+	parts of core.c (core_file_command, exec_file_command) moved to
+	*-dep.c. 
+
+Mon Jul 18 19:45:51 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* dbxread.c: typo in read_struct_type (missing '=') was causing a
+	C struct to be parsed as a C++ struct, resulting in a `invalid
+	character' message.
+
+Sun Jul 17 22:27:32 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* printcmd.c, symtab.c, valops.c, expread.y: When an expression is
+	read, the innermost block required to evaluate the expression is
+	saved in the global variable `innermost_block'.  This information
+	is saved in the `block' field of an auto-display so that
+	expressions with inactive variables can be skipped.  `info display'
+	tells the user which displays are active and which are not.  New
+	fn `contained_in' returns nonzero if one block is contained within
+	another. 
+
+Fri Jul 15 01:53:14 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* infrun.c, m-i386.h: Use macro TRAPS_EXPECTED to set number of
+	traps to skip when sh execs the program.  Default is 2, m-i386.h
+	overrides this and sets to 4.
+
+	* coffread.c, infrun.c: minor changes for the i386.  May be able
+	to eliminate them with more general code.
+
+	* default-infdep.c: #ifdef SYSTEMV, include header file types.h.
+	Also switched the order of signal.h and user.h, since System 5
+	requires signal.h to come first.
+
+	* core.c main.c, remote,c, source.c, inflow.c: #ifdef SYSTEMV,
+	include various header files.  Usually types.h and fcntl.h.
+
+	* utils.c: added queue routines needed by the i386 (and other sys
+	5 machines).
+
+	* sys5.c, regex.c, regex.h: new files for sys 5 systems.  (The
+	regex files are simply links to /gp/gnu/lib.)
+
+Thu Jul 14 01:47:14 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* config.gdb, README: Provide a list of known machines when user
+	enters an invalid machine.  New second arg is operating system,
+	currently only used with `sunos4' or `os4'. Entry for i386 added.
+
+	* news-infdep.c: new file.
+
+	* m-news.h: new version which deals with new bugs in news800's OS.
+
+Tue Jul 12 19:52:16 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* Makefile, *.c, munch, config.gdb, README: New initialization
+	scheme uses nm to find functions whose names begin with
+	`_initialize_'.  Files `initialize.h', `firstfile.c',
+	`lastfile.c', `m-*init.h' no longer needed. 
+
+	* eval.c, symtab.c, valarith.c, valops.c, value.h, values.c: Bug
+	fixes from gdb+ 2.5.4.  evaluate_subexp takes a new arg, type
+	expected. New fn value_virtual_fn_field.
+
+Mon Jul 11 00:48:49 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* core.c (read_memory): xfer_core_file was being called with an
+	extra argument (0) by read_memory.
+
+	* core.c (read_memory), *-infdep.c (read_inferior_memory),
+	valops.c (value_at): read_memory and read_inferior_memory now work
+	like write_memory and write_inferior_memory in that errno is
+	checked after each ptrace and returned to the caller.  Used in
+	value_at to detect references to addresses which are out of
+	bounds.  Also core.c (xfer_core_file): return 1 if invalid
+	address, 0 otherwise.
+
+	* inflow.c, <machine>-infdep.c: removed all calls to ptrace from
+	inflow.c and put them in machine-dependent files *-infdep.c.
+
+Sun Jul 10 19:19:36 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* symmisc.c: (read_symsegs) Accept only format number 2.  Since
+	the size of the type structure changed when C++ support was added,
+	format 1 can no longer be used.
+
+	* core.c, m-sunos4.h: (core_file_command) support for SunOS 4.0.
+	Slight change in the core structure.  #ifdef SUNOS4.  New file
+	m-sunos4.h.  May want to change config.gdb also.
+
+Fri Jul  8 19:59:49 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* breakpoint.c: (break_command_1) Allow `break if condition'
+	rather than parsing `if' as a function name and returning an
+	error.
+
+Thu Jul  7 22:22:47 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* C++: valops.c, valprint.c, value.h, values.c: merged code to deal
+	with C++ expressions.
+
+Wed Jul  6 03:28:18 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+        * C++: dbxread.c: (read_dbx_symtab, condense_misc_bunches,
+	add_file_command)  Merged code to read symbol information from
+	an incrementally linked file.  symmisc.c:
+	(init_free_inclink_symtabs, free_inclink_symtabs) Cleanup
+	routines.
+
+Tue Jul  5 02:50:41 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* C++: symtab.c, breakpoint.c, source.c:  Merged code to deal with
+	ambiguous line specifications.  In C++ one can have overloaded
+	function names, so that `list classname::overloadedfuncname'
+	refers to several different lines, possibly in different files.
+
+Fri Jul  1 02:44:20 1988  Peter TerMaat  (pete at corn-chex.ai.mit.edu)
+
+	* C++: symtab.c: replaced lookup_symtab_1 and lookup_symtab_2 with
+	a modified lookup_symbol which checks for fields of the current
+	implied argument `this'.  printcmd.c, source.c, symtab.c,
+	valops.c: Need to change callers once callers are
+	installed. 
+
+Wed Jun 29 01:26:56 1988  Peter TerMaat  (pete at frosted-flakes.ai.mit.edu)
+
+	* C++: eval.c, expprint.c, expread.y, expression.h, valarith.c, 
+	Merged code to deal with evaluation of user-defined operators,
+	member functions, and virtual functions.
+	binop_must_be_user_defined tests for user-defined binops, 
+	value_x_binop calls the appropriate operator function. 
+
+Tue Jun 28 02:56:42 1988  Peter TerMaat  (pete at frosted-flakes.ai.mit.edu)
+
+	* C++: Makefile: changed the echo: expect 101 shift/reduce conflicts 
+	and 1 reduce/reduce conflict.
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-9091 b/gdb/ChangeLog-9091
new file mode 100644
index 0000000..42f8d0b
--- /dev/null
+++ b/gdb/ChangeLog-9091
@@ -0,0 +1,8322 @@
+Mon Dec 30 10:57:02 1991  Per Bothner  (bothner at cygnus.com)
+
+	Mainly stuff to improve handling of TYPE_CODE_REF values.
+	* valops.c (value_addr):  If taking the addres of a
+	TYPE_CODE_REF, just cast the object to the corresponding
+	TYPE_CODE_PTR.  This yields correct C++ semantics, and
+	preserves the location information, which has the nice effect
+	that &(&R) given the location containing R.
+	* values.c (value_copy):  Make non-static (used by value_addr).
+	* eval.c (evaluate_subexp_for_address):  Use the default
+	scheme (with value_addr) for a variable if it has TYPE_CODE_REF.
+	* valops.c (value_addr), eval.c (evaluate_subexp_for_address,
+	evaluate_subexp_with_coercion):  Factor out some common
+	expressions into variables, for easier reading.
+	* findvar.c (locate_var_value):  Remove code to handle
+	TYPE_CODE_REF - it should no longer be needed.
+	* valops.c (value_assign):  Do a COERCE_REF on the
+	destination operand, for correct C++ semantics.
+	* valarith.c (value_x_binop):  Ditto:  De-reference C++
+	references in the arguments.
+	* valops.c:  ANSI-fy: bcopy->memcpy, bzero->memset.
+
+Sat Dec 28 11:30:26 1991  Per Bothner  (bothner at cygnus.com)
+
+	* dwarfread.c, coffread.c:  Use INIT_CPLUS_SPECIFIC.
+	* symtab.c (gdb_mangle_name):  Recognize and handle
+	constructors specially.
+	* symtab.c (check_stub_method):  Test for failure from
+	cplus-demangle by calling error() instead of seg-faulting ...
+
+Fri Dec 27 22:21:30 1991  Fred Fish  (fnf at cygnus.com)
+
+	* defs.h:  Add definition of null_cleanup()
+
+	* procfs.c:  Many small changes to add base support for a new
+	"info proc" command (currently only printing of the address
+	space mapping is implemented) and allow iteration over the
+	address space mapping, calling an arbitrary function for each
+	mapping (used for shared library support).
+
+	* solib.c:  Change all ifdefs that checked for "sun" to check
+	for "!SVR4_SHARED_LIBS" instead.  Rewrite lookup_base() to
+	handle locating the debug base address even when not currently
+	stopped at the dynamic linker entry point.
+
+	* utils.c:  Add null_cleanup() as a known function that does
+	nothing to serve as a base for possibly long cleanup chains
+	with no specific "first cleanup" to serve as an anchor.
+
+	* xm-sysv4.h:  Add define of SVR4_SHARED_LIBS
+
+Fri Dec 27 10:11:33 1991  Per Bothner  (bothner at cygnus.com)
+
+	* arm-opcode.h, m88k-opcode.h, pn-opcode.h, np1-opcode.h,
+	pyr-opcode.h, tahoe-opcode, vax-opcode.h:  Removed -
+	these are all essentially the same as the versions
+	in ../include/opcode.  The remaining *-opcode.h here
+	are not quite so obviously the same, and need study.
+	* arm-pinsn.c, gould-pinsn.c, m88k-pinsn.c, pyr-pinsn.c,
+	tahoe-pinsn.c, vax-pinsn.c:  Change so these include
+	opcode/FOO.h (actually ../include/opcode/FOO.h)
+	instead of the recenntly departed opcode-FOO.h files.
+	* sparc-pinsn.c:  Now that we're using the much tighter
+	opcode table in ../include/opcode/sparc.h, we shouldn't
+	need to sort the opcodes before dis-assembly.
+
+	* symtab.h, symmisc.c:  Make cplus_struct_default be const.
+	* symtab.h, buildsym.c:  Add and use INIT_CPLUS_SPECIFIC macro.
+	* symmisc.c:  Remove unused 'nfields' variable.
+	* buildsym.h:  Add extern decl of unknown_symtype_complaint,
+	since it used used by partial-stab.h (included two places).
+	* partial-stab.h:  Re-arrange DBXREAD_ONLY #ifdefs so that
+	we should never hit the default case (until new stab codes
+	are added).  Hence, we can leave the complaint in the
+	default case in even when DBXREAD_ONLY is off.
+	* partial_stab.h: Recognize a pair of N_SO stabs (one for the
+	directory, one for the filename proper) without peeking ahead.
+	* dbxread.c, mipsread.c: Because of previous change, don't need
+	ugly CHECK_SECOND_N_SO macro.
+	* buildsym.h, dbxread.c, mipsread.c:  Make next_symbol_text a
+	macro that invokes a function pointer in next_symbol_text_func.
+	* mipsread.c:  Added comments various places to
+	explain what is going on.
+	* mipsread.c (parse_symbol):  Support the new (SGI-specific?)
+	symbol types stStruct, stUnion, and stEnum.
+	Also, some fixes in the code for dealing with tags.
+	* mipsread.c:  Change handling of startup_file_start and _end
+	- now just use the textlow and texhigh of a psymtab
+	to check if we've found the startup-file.
+	* mipsread.c:  Replace s_idx by global cur_sdx in many places.
+	This is so mips_next_symbol_text can get at it.
+
+Thu Dec 26 19:52:01 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dbxread.c, symmisc.c:  Move add_psymbol_to_plist() from
+	dbxread.c to symmisc and change name to add_psymbol_to_list.
+	Ditto for add_psymbol_addr_to_plist().  Also expand their
+	body to not use ADD_PSYMBOL_VT_TO_LIST.
+
+	* dwarfread.c:  Remove add_psymbol_to_list() and convert usages
+	to the ADD_PSYMBOL_TO_LIST macro.
+
+	* ieee-float.c:  Change "#ifdef DEBUG" to "#ifdef IEEE_DEBUG"
+	to avoid collision with the DEBUG for ADD_PSYMBOL_VT_TO_LIST.
+
+	* partial-stab.h, symfile.h:  Move definitions of the macros
+	ADD_PSYMBOL_TO_LIST and ADD_PSYMBOL_ADDR_TO_LIST from
+	partial-stab.h to symfile.h.  They aren't stab specific.
+	Change ADD_PSYMBOL_VT_TO_LIST to use memcpy rather than strncpy.
+
+Tue Dec 24 11:38:08 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll VERSION to 4.3.2.
+
+Mon Dec 23 13:54:35 1991  Per Bothner  (bothner at cygnus.com)
+
+	* m68k-opcode.h, mips-opcode.h, sparc-opcode.h:  Deleted.
+	* m68k-pinsn.c, mips-pinsn.c, sparc-pinsn.c:
+	Include <opcode/FOO.h> instead of <FOO-opcode.h>.
+
+	* symtab.h, symtab.c, coffread.c, dwarfread.c, symmisc.c,
+	dbxread.c:  The TYPE_CPLUS_SPECIFIC structure is now only
+	allocated when it is needed.  Until it is needed, it points
+	to a shared statically allocated structure.
+
+	* buildsym.h, buildsym.c, dbxread.c: Remove the kludgy code
+	in read_ofile_symtab to recognize two initial N_SO stabs,
+	and let process_on_symbol handle it.  This is cleaner, more
+	efficient, and lets mipsread.c share the same code.
+
+	* symfile.h, partial-stab.h:  Move ADD_PSYMBOL_VT_TO_LIST
+	and related macros to here ...
+	* dbxread.c: ... from here.
+	* symmisc.c:  Move the "overflow" handling from
+	ADD_PSYMBOL_VT_TO_LIST macro into new function extend_psymbol_list.
+	* dwarfread.c:  Re-write add_psymbol_to_list to use
+	ADD_PSYMBOL_VT_TO_LIST macro.
+
+	* mipsread.c: Extend mipsread.c to handle stabs-style symbols
+	encapsulated in ecoff symbols.  This enable full g++ debugging.  
+	* partial-stab.h:  Move the code for pre-scanning symbols
+	and building psymtabs to an include file, out from dbxread.c.
+	This way, the same code can also be used by mipsread.c.
+	* dbxread.c, buildsym.h:  Various changes to allow some functions
+	to be used by mipsread.c (also some arguable stylistic changes).
+
+	* tm-mips.h:  Define BLOCK_ADDRESS_ABSOLUTE, at least for now,
+	since mips-tfile puts relocatable addresses into LBRAC/RBRAC
+	stabs.
+
+	* mipsread.c:  Replace code to handle ambiguous tag blocks.
+	Instead of allocating a TYPE_CODE_UNDEF, guess (by looking
+	at types and offsets) if a tag is a struct, union, or enum.
+	Still patch it later if we find out for sure.
+	* mipsread.c:  In various ways, replace Forin's
+	ideo-syncratic code by code that fits better with the
+	rest of gdb, for both stabs-based and ecoff-based symtabs.
+	E.g.  use end_psymtab; don't do extra passes over FDR table to
+	pre-partition global data; don't use external symbols to
+	create static/global symbols (just put them in the
+	misc_vector); use ADD_PSYMBOL_TO_LIST macro; don't
+	sort psymtabs or symtabs; use obstacks more.
+
+	* symtab.c, mipsread.c, dbxread.c, buildsym.c:
+	ANSIfy: Replace bcopy by memcpy, bzero by memset.
+
+Sun Dec 22 19:31:04 1991  Fred Fish  (fnf at cygnus.com)
+
+	* solib.c (locate_base):  Fix uninitialized variable that was 
+	causing return of random value to callee.
+
+	* config/mh-amix, config/mh-i386v4:  Change to find alloca by
+	compiling and linking alloca.c, even when it is not strictly
+	required.  Also arrange to link with -ltermlib rather than
+	-ltermcap.
+
+	* Makefile.in:  Move TERMCAP definition to prior to inclusion
+	of host makefile fragments so it can be overridden.
+
+Fri Dec 20 16:33:39 1991  John Gilmore  (gnu at cygnus.com)
+
+	* xcoffread.c (read_symbol_lineno):  Logic error in incrementing
+	symbol table entry number.  (From Metin Ozisik.)
+
+Fri Dec 20 11:36:38 1991  Fred Fish  (fnf at cygnus.com)
+
+	* config/mh-i386v4:  Change XM_CLIBS to "-lc /usr/ucblib/libucb.a"
+	so compiles with native compilers (without builtin alloca) can
+	pick up the version from the bsd emulation library.  However, we
+	search the standard C library first so we don't pick up lots of
+	other broken stuff from libucb.a, that we *don't* want.
+
+	* configure.in, tm-amix.h, tm-i386v4.h, xm-amix.h, xm-i386v4.h:
+	Change svr4 references to sysv4.
+
+	* source.c:  Move declaration of external function index to
+	front of file so it is in scope for all references.
+
+	* utils.c (error, fatal):  Make definitions consistent with
+	defs.h declarations (declared as "volatile void").
+
+Fri Dec 20 10:55:36 1991  John Gilmore  (gnu at cygnus.com)
+
+	* rs6k-opcode.h:  Bugfix sfe and stbrx.  By Al Kossow.
+
+Wed Dec 18 17:09:06 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* command.h, defs.h, eval.h, expression.h, remote-sa.sparc.c,
+	sparc-tdep.c, symtab.h, target.h, value.h, vx-share/ptrace.h,
+	vx-share/xdr_ptrace.h, vx-share/xdr_rdb.h:  ANSIfy enums.
+
+Mon Dec 16 12:31:46 1991  Fred Fish  (fnf at cygnus.com)
+
+	* config/mt-amix, config/mt-i386v4:  Add solib.o to TDEPFILES
+	for these SVR4 systems.
+
+	* symfile.c (symbol_file_add):  When verbose is set, print
+	the names of files from which symbols are being loaded, as
+	when from_tty is true.
+
+	* solib.c:  Completely reorganized (rewritten) to support
+	SVR4 shared libraries in a manner very close to the original
+	SunOS implementation.  This support is expected to change and
+	become more general at some future time.  The SVR4 version
+	does not yet work for attached processes, for example.
+
+	* dwarfread.c:  Arrange in dwarf_build_psymtabs() for the 
+	relocation address to be valid whether or not symbols are
+	being read from a shared library or an executable.  Use the
+	relocation address recorded in the psymtab when reading
+	full symbol tables (in read_ofile_symtab).  Ensure that the
+	relocated address ranges are recorded in partial symtabs.
+
+	* elfread.c:  Add new function elf_interpreter() to return the
+	string from the ELF ".interp" section.  This is the interpreter
+	that the kernel tries to run and feed the executable to.
+	Expand arguments to record_misc_function to include a type arg.
+	Modify elf_symtab_read() to supply the type arg, and to do symbol
+	relocations for symbols read in from shared libraries.
+
+	* procfs.c:  Add new functions proc_base_address() and
+	proc_address_to_fd(), used by shared library support.
+
+	* tm-svr4.h:  Add macros to support SVR4 shared libraries.
+	Definitions for SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK,
+	CLEAR_SOLIB, and DISABLE_UNSETTABLE_BREAK.
+
+Fri Dec 13 20:11:26 1991  John Gilmore  (gnu at cygnus.com)
+
+	* infrun.c, remote-eb.c, remote-nindy.c, remote-vx.c:  Remove
+	unused START_INFERIOR_HOOK.
+
+	* remote-eb.c:  Change timeout to 24 seconds (*10 fits in byte)
+	to account for slow loading from floppies.
+	(eb_create_inferior):  New fn, from eb_start and
+	nindy_create_inferior.
+	(eb_close):  Only use log_file if nonzero.
+	(eb_xfer_inferior_memory):  If not writing, then read!
+	(eb_read_inferior_memory, eb_write_inferior_memory):  Return length.
+	(eb_kill):  A new no-op.
+	(eb_mourn_inferior):  Remove breakpoints, then generically weep.
+
+Fri Dec 13 16:09:23 1991  Fred Fish  (fnf at cygnus.com)
+
+	* breakpoint.c, findvar.c, infrun.c, putenv.c, stack.c:  Fix
+	miscellaneous comparisons of integer with NULL that elicit
+	compiler warnings about comparison of integer with pointer, when
+	NULL is ((void *) 0) rather than just a bare 0.
+
+Wed Dec 11 13:02:58 1991  John Gilmore  (gnu at cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set_one):  Disable each breakpoint
+	while we reset it, in case of problems.  Print breakpoint number
+	in error messages.
+
+	* buildsym.c (read_struct_type):  Avoid sun3 compiler bug with
+	foo[--n].
+
+	* source.c (find_source_lines): If getting file mod time fails,
+	don't warn.
+
+	* target.c (target_xfer_memory):  If errno is set, return it,
+	rather than EIO.
+
+Tue Dec 10 04:07:22 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: infodir belongs in datadir.
+
+Sun Dec  8 21:13:33 1991  Michael Tiemann  (tiemann at sphagnum.cygnus.com)
+
+	* symtab.h (struct fn_field): Add new fields `is_private',
+	`is_protected', `is_stub', making room by reducing the size of
+	`voffset'.
+	(struct fn_fieldlist): Delete the fields `private_fn_field_bits'
+	and `protected_fn_field_bits'.
+	(TYPE_FN_{PRIVATE,PROTECTED}_BITS): Deleted.
+	(SET_TYPE_FN_{PRIVATE,PROTECTED}): Deleted.
+	(TYPE_FN_{PRIVATE,PROTECTED}): Deleted.
+	(TYPE_FN_FIELD_{STUB,PRIVATE,PROTECTED}): New macros.
+	* valops.c, valprint.c, symtab.c: All callers updated.
+
+	* buildsym.c (read_struct_type): Delete the `visibility' field
+	from `struct next_fnfield', and rework code so that visibility
+	info is stored into the fn_field directly.  Also, hacked to set
+	TYPE_FN_FIELD_STUB for both static and normal member functions.
+
+Sat Dec  7 18:13:11 1991  Fred Fish  (fnf at cygnus.com)
+
+	* i386-tdep.c:  Fix a problem on i386 systems where buffered code
+	stream access was failing to take into account the minimum size
+	granularity of the code section.  For now, the buffering is simply
+	disabled.  There is a similar problem in the i386 disassember code
+	that has not yet been fixed (FIXME).
+
+	* gmalloc.c:  Use macros to hide some of the ugly casting required
+	in the previously applied fix for pointers with high bits set.
+
+Sat Dec  7 16:49:35 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll VERSION to 4.3.1.
+
+Sat Dec  7 04:12:35 1991  John Gilmore  (gnu at cygnus.com)
+
+	GDB-4.3 release!
+
+	* Makefile.in:  Roll VERSION to 4.3
+	* README, TODO, WHATS.NEW, depend:  Update.
+
+	* inflow.c (terminal_inferior):  Avoid error msg if attached.
+
+	* gmalloc.c:  Fix bug that causes malloc & free to
+	fail on systems where pointers have the high bit set (0x800efcf0
+	for example).  The problem is that the difference between two
+	pointers is a signed integer, so the computation
+
+	        (char *) 0x800efcf0 - (char *) 0
+
+	yields a negative value.  The sign of the result of the modulus
+	operator is machine dependent for negative operands, thus it is
+	possible for it to end up negative.  From Fred Fish.
+
+Sat Dec  7 00:00:15 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: install using INSTALL_PROGRAM and INSTALL_DATA.
+	  added clean-info.  added some standards.text support and made it
+	  look like our other Makefiles.
+
+	* configure.in: mark this directory target dependent.  configure
+	  now runs entirely in objdir so make existence tests and
+	  references against ${srcdir}.
+
+Fri Dec  6 08:30:36 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (enum_type, struct_type):  Fixes for opaque and
+	anonymous enumerations, structures, and unions.  Now passes all
+	the current gdb test suite tests.
+
+Thu Dec  5 22:46:13 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
+	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
+	  and mandir now keyed off datadir by default.
+
+Thu Dec  5 21:53:21 1991  John Gilmore  (gnu at cygnus.com)
+
+	* symtab.c (decode_line_1):  If SKIP_PROLOGUE leaves us in
+	mid-line, be more careful about possibly advancing to the next line.
+
+Thu Dec  5 18:59:51 1991  Michael Tiemann  (tiemann at cygnus.com)
+
+	* cplus-dem.c (cplus_demangle): Call `string_need' when
+	null-terminating a partially-computed string.
+
+Thu Dec  5 18:19:43 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (enum_type):  Build a correct TYPE_NAME, add a
+	symbol to the symbol table for each member of the enum.
+
+	* dwarfread.c (struct_type):  Build a correct TYPE_NAME.
+
+	* dwarfread.c (add_enum_psymbol):  New function to extract enum
+	member names and add them to the partial symbol table while
+	building partial symbol tables.
+
+Thu Dec  5 17:31:05 1991  John Gilmore  (gnu at cygnus.com)
+
+	* symtab.c (check_stub_method):  Must allocate two extra argument
+	slots (one for `this', one for arglist terminator).
+
+Thu Dec  5 10:51:05 1991  Fred Fish  (fnf at cygnus.com)
+
+	* inflow.c (child_terminal_info): Supply missing '"' character.
+
+	* buildsym.c (define_symbol):  Supply missing parenthesis.
+
+Thu Dec  5 03:34:21 1991  John Gilmore  (gnu at cygnus.com)
+
+	* coredep.c (fetch_core_registers):  Fencepost error.  Fixed by
+	Jay Lepreau <lepreau@cs.utah.edu>.
+
+	* inflow.c:  Remember whether GDB has a terminal.  Avoid switching
+	terminals back and forth if we don't have one.
+
+	* c-exp.y (parse_number):  Zero is not an unsigned int constant!
+	* dbxread.c (read_dbx_symtab):  Enum type numbers can be in (1,2) form.
+
+	Improve type parsing.
+	* buildsym.c (define_symbol, read_range_type): Add
+	long_kludge_name that passes the names of range types being
+	defined, down to where we must choose between 'int' and 'long'
+	variants.  This fails on Sun C anyway since the compiler itself is
+	confused between int and long.
+	(read_array_type, cleanup_undefined_types):  Correct the size of
+	array type whose element-type size isn't immediately known.
+
+	Early preparation to blow away many builtin types, building them
+	on the fly as needed.  Don't compare types to builtin types with
+	==; examine the relevant fields instead.
+	* coffread.c (process_coff_symbol: C_ARG, C_REGPARM):  Avoid ==.
+	* buildsym.c (define_symbol, case 'p'):  Avoid ==.
+	* valops.c (value_arg_coerce):  Avoid ==.  Don't assume host and
+	target types are the same.
+	* valprint.c (val_print):  I finally understand arrays, remove FIXME.
+
+	* symmisc.c (printpsyms_command):  Reduce redundancy, and put all
+	addresses in GDB itself into parens for easy cleanup and diffing.
+
+Wed Dec  4 21:05:30 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread (enum_type):  Arrange for the order of enumeration
+	members to match the source code order; not the order in the
+	Dwarf information, which is explicitly reverse order.
+
+Wed Dec  4 18:24:39 1991  John Gilmore  (gnu at cygnus.com)
+
+	* main.c (input_from_terminal_p):  Check whether GDB has a
+	terminal at all.
+	(initialize_main):  Revise doc for `set editing'.
+
+Wed Dec  4 15:36:39 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (struct_type):  Handle structures and unions which
+	contain DIE's other than just member dies.
+
+Wed Dec  4 01:59:05 1991  John Gilmore  (gnu at cygnus.com)
+
+	* symfile.c (reread_symbols):  Avoid kludging mtime_set, now that
+	BFD is fixed.
+
+Tue Dec  3 17:24:57 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  VERSION 4.2.96.
+
+	* main.c (initialize_main):  Revise command descriptions.
+	* command.c (show_user):  `info user' -> `show user'.	
+	* symtab.c (_initialize_symtab):  Typo in `info types' desc.
+
+	* coffread.c (coff_symfile_read):  Avoid select_source_symtab,
+	since it is not needed and can cause errors when examining ".o"s.
+	(read_coff_symtab, decode_base_type):  Use complain, not printf.
+	Print symbol name, not its number.
+	Remove "#if defined(clipper) #define BELIEVE_PCC_PROMOTION", which
+	someday should go in a clipper target config file.
+
+	* symfile.c (compact_misc_function_vector):  Handle empty vector.
+	(complain, clear_complaints, syms_from_objfile):  Fix complaint
+	formatting.
+	* xcoffexec.c:  Change syms_from_objfile caller.
+
+	* sparc-xdep.c:  Force tm-file as tm-sparc.h, to make it compile
+	when configured for cross debugging.  FIXME, this needs a more
+	general solution.
+
+Mon Dec  2 11:04:05 1991  Per Bothner  (bothner at cygnus.com)
+
+	* mips-tdep.c (init_extra_frame_info):  Float register
+	'i' has gdb-internal number 'FP0+i', not '32+i'.
+	* mipsread.c (new_symbol):  Translate g++ special
+	symbol "$t" to "this".
+
+Sat Nov 30 21:29:55 1991  Steve Chamberlain  (sac at cygnus.com)
+	Changes due to include file renaming:
+
+	* xcoffread.c:	internalcoff.h	->coff/internal.c,
+	  		coff-rs6000.h	->coff/rs6000.h
+	* mipsread.c:	coff-mips.h	->coff/mips.h
+	* elfread.c:    elf-common.h	->elf/common.h 
+			elf-external.h	->elf/external.h,
+			elf-internal.h	->elf/internal.h
+	* dwarfread.c	dwarf.h		->elf/dwarf.h
+	* dbxread.c:	aout64.h	->aout/aout64.h
+			stab.gnu.h	->aout/stab_gnu.h
+		   
+	* coffread.c:   internalcoff.h	->coff/internal.h
+	* buildsym.c:   stab.gnu.h	->aout/stab_gnu.h
+	* depend        Updated to take the above into account.
+
+Fri Nov 29 16:59:25 1991  Fred Fish  (fnf at cygnus.com)
+
+	* configure.in:  Add SVR4 i386 configurations.
+
+	* config/mh-i386v4, config/mt-i386v4, tm-i386v4.h, xm-i386v4.h:
+	New files for i386/SVR4.
+
+	* tm-i386v.h:  Allow START_INFERIOR_TRAPS_EXPECTED and
+	DECR_PC_AFTER_BREAK to be predefined by files including 
+	tm-i386v.h.
+
+	* i386-tdep.c:  Add supply_gregset(), fill_gregset(),
+	supply_fpregset(), and fill_fpregset() functions, which are
+	target dependent support functions for the SVR4 /proc register
+	interface.
+
+	* dwarfread.c (enum_type, struct_type):  Expand recognized
+	compiler generated tags to include symbols beginning with '.' as
+	well as '~'.
+
+	* symtab.c (sources_info):  Change simple printf of error message
+	to call to error().
+
+Fri Nov 29 16:04:21 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/gdb.texinfo: remove leading comments that survived M4 but
+        described its role in the doc; add one more font to colophon;
+        strengthen disclaimer about unsupported configs.
+
+Wed Nov 27 01:23:41 1991  John Gilmore  (gnu at cygnus.com)
+
+	Fix bugs in C++ debugging.
+
+	* symtab.h:  target_type is not used in record types.
+	Eliminate TYPE_MAIN_VARIANT and TYPE_NEXT_VARIANT.  Eliminate
+	lookup_method_type.  Add TYPE_TYPE_SPECIFIC macro.
+
+	* symtab.c (lookup_member_type):  Don't chain them up, just
+	allocate one in symbol_obstack when we need one.
+	(allocate_stub_method):  Build stub in symbol_obstack.
+	(check_stub_method):  Move here from values.c.  Don't deallocate
+	stub; overwrite it.
+	(lookup_method_type):  Gone now.
+
+	* buildsym.c: Handle g++ v1 stabs a little bit better.
+	Change some C++ parsing error()s to complain()ts.
+	* buildsym.c, findvar.c, printcmd.c, symtab.c:  Make unions and
+	structs have the same representation and work the same as far as
+	C++ is concerned. 
+	* buildsym.c, symtab.c, values.c: Remove all references to
+	TYPE_MAIN_VARIANT and TYPE_NEXT_VARIANT.
+
+	* valops.c:  Improve comments and indentation.  Only call
+	check_stub_method when the stub flag is on.
+	* valprint.c:  Fix or mark minor bugs and unportabilities.
+	
+	* coffread.c (anonymous unions):  Allocate a cplus structure.
+
+	* mipsread.c:  Eliminate "template" types.  Build new, real
+	types whenever we need them.  Allocate cplus structures as needed.
+	Bulletproof the type parsing a bit more.  Mark storage leaks.
+	(parse_type):  Copy TYPE_TYPE_SPECIFIC when copying a real type
+	on top of a partial type.
+
+Fri Nov 22 16:39:57 1991  John Gilmore  (gnu at cygnus.com)
+
+	* inflow.c (terminal_inferior):  Check the results of ioctl's, and
+	print a message if any of them fail.
+	(terminal_ours_1):  Store result of ioctl's for debugging, but
+	don't print (the terminal isn't ours...).
+
+	* tm-tahoe.h (FRAME_ARGS_ADDRESS):  No need to offset from frame
+	pointer.
+
+	* m2-exp.y (MAX, MIN):  Rename to MAX_FUNC, MIN_FUNC to avoid
+	conflicts with system header files.
+
+Fri Nov 22 08:27:40 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Roll VERSION to 4.2.95.
+
+	* buildsym.c, coredep.c, mem-break.c, xcoffread.c:  Put <stdio.h>
+	first, before defs.h.
+	* config/mh-i386sco: Override compiler to gcc, print warning.
+	* configure.in:  Handle i386-none-aout rather than i386-aout-none.
+	* infptrace.c, language.h, utils.c:  Lint.
+	* m2-exp.y:  #undef MAX and MIN in case system includes set them.
+	* xm-tahoe.h:  Set HOST_BYTE_ORDER.  Include system versions of
+	{BIG,LITTLE}_ENDIAN and the INT_MAX family first, to avoid
+	redefinition warnings.
+	* defs.h:  Reorder things so that the xm-file gets first crack
+	at #define's, followed by defs.h and then the tm-file.
+	* Makefile.in:  Remove spaces after 'ignore exit code' - flags.
+	Late-model BSD 'make's don't cope with them.
+
+Thu Nov 21 23:48:56 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll new files into various lists.
+
+Thu Nov 21 18:26:11 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (struct_type):  Must initialize the c++ specific
+	portion of union types as well as struct types, since gdb attempts
+	to reference the c++ specific info for both types.
+
+Thu Nov 21 10:23:52 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in: Roll VERSION to 4.2.90.
+
+	* defs.h:  Incorporate param.h into defs.h.  All users changed.
+	* param-no-tm.h:  Change users to define TM_FILE_OVERRIDE instead.
+	* param.h, param-no-tm.h:  Removed.
+	* Update copyrights in all changed files.
+	* dbxread.c, dwarfread.c, inflow.c, infrun.c, m2-exp.y, putenv.c,
+	solib.c, symtab.h, tm-umax.h, valprint.c:  Lint.
+	* tm-convex.h, tm-hp300hpux.h, tm-merlin.h, tm-sparc.h,
+	xm-merlin.h:  Avoid host include files in target descriptions.
+	* getpagesize.h:  Removed, libiberty copes now.
+	* Makefile.in:  Remove getpagesize.h, param.h, param-no-tm.h.
+
+	* exec.c (exec_files_info):  If `verbose' is set, show file offset
+	as well.
+
+	* main.c:  Use getcwd rather than getwd.
+	* standalone.c:  Fake getcwd rather than getwd.
+	* xm-*.h:  Remove fake values of MAXPATHLEN.
+
+	* xcoffexec.c:  Add /* */ to #if 0'd thing to help ANSI.
+
+Wed Nov 20 18:35:56 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Remove gdb/hp-include.  Support for HP a.out oddities should be
+	in BFD, not in GDB.  Move gdb/hp-include/a.out.h to include/a.out.hp.h.
+
+	* infptrace.c, tm-sun386.h:  Cashier <a.out.gnu.h>, remove refs.
+
+	* configure.in, xconfig, tconfig, Makefile.in, doc/gdbint.texinfo:
+	Makefile fragments for various hosts and targets now come from
+	gdb/config/mh-* and gdb/config/mt-*.  This is for consistency with
+	other config setups.
+
+	* rs6000-pinsn.c, rs6k-opcode.h:  Clean up.
+	* rs6k-opcode.def:  Delete.
+
+Wed Nov 20 05:04:40 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c:  Recognize obsolete form of AT_element_list
+	attribute still used by at least one AT&T compiler, and possibly
+	more.
+
+Tue Nov 19 07:53:55 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (enum_type, struct_type):  Ignore names invented by
+	helpful compilers for anonymous structs, unions, and enums.
+
+	* c-exp.y, m2-exp.y:  Add defines for yymaxdepth, yy_yys, and
+	yy_yyv, so multiple parsers produced by SVR4 versions of yacc
+	can coexist in the same executable without collision.
+
+	* symtab.h:  Add declaration for lookup_template_type() to kill
+	compiler warnings about conversions from int to pointer.
+
+Mon Nov 18 17:45:18 1991  Fred Fish  (fnf at cygnus.com)
+
+	* procfs.c:  Move inclusion of defs.h to before param.h, as in
+	all the other source files that include both.  This is required
+	to supply some typedefs that are used in files included by param.h.
+
+	* m68k-tdep.c (m68k_skip_prologue):  Add generic m68k support for
+	skipping function prologues, ala the other cpu families (i386,
+	mips, m88k, etc).  Add the ability to skip movm and fmovm
+	instructions in the prologues.  Still needs support for profile
+	(-p compiled) prologue sequences (FIXME).
+
+	* tm-68k.h:  Change SKIP_PROLOGUE macro to use the new generic
+	m68k prologue skipping function by default.
+
+	* tm-altos.h, tm-isi.h:  Continue to use the old definition of
+	SKIP_PROLOGUE.
+
+Mon Nov 18 15:12:45 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Remove tdesc stuff, and extra blanks before colons.
+	* blockframe.c:  Remove tdesc-related code.  Default
+	FRAME_CHAIN_COMBINE.
+	* infrun.c:  Remove tdesc-related code.
+	* m88k-tdep.c (frame_chain_combine, init_frame_pc):  Remove copies
+	of defaultable things.
+	* tm-m88k.h:  New file, common to all Moto 88k target configs.
+	Derived from tm-delta88.h.
+	* tm-delta88.h:  Use it.
+	* xm-m88k.h:  Common file for 88K hosts.  Remove obsolete stuff.
+	* xm-delta88.h:  Use it.
+	* tm-*.h:  Remove FRAME_CHAIN_COMBINE macros, since all are
+	default.
+	* coffread.c:  Remove tdesc stuff.
+	* tconfig/delta88, tconfig/m88k:  Remove tdesc stuff.
+	* xconfig/m88k:  Rename tm-88k.h to tm-m88k.h.
+
+Mon Nov 18 13:51:37 1991  Per Bothner  (bothner at cygnus.com)
+
+	* source.c (open_source_file):  If openp fails, try again
+	using just the base (non-directory) part of the filename.
+	This solves various annoying problems, such as when the
+	source was compiled with an absolute pathname - and the
+	source files have moved.  Or if the source was compiled
+	using a relative pathname, it can be more convenient
+	to just specific the source directory to the dir command.
+
+Mon Nov 18 00:04:41 1991  Fred Fish  (fnf at cygnus.com)
+
+	* cplus-dem.c (munge_function_name):  Add missing third arg to
+	instance of call to do_type().
+
+	* dwarfread.c:  Changes to match new dwarf.h.  Remove 
+	AT_deriv_list, AT_loclist, AT_incomplete, AT_const_data,
+	and AT_is_external.
+
+Sun Nov 17 16:20:53 1991  Michael Tiemann  (tiemann at rtl.cygnus.com)
+
+	* symtab.h (struct type): Moved C++-specific fields into new type
+	`struct cplus_struct_type'.  Now takes 10% less memory.  Many
+	macros changed.
+	* symtab.c (init_type): Don't set fields belonging to
+	TYPE_CPLUS_SPECIFIC unless TYPE is TYPE_CODE_STRUCT.
+	* buildsym.c (read_type): Allocate TYPE_CPLUS_SPECIFIC for
+	TYPE_CODE_STRUCT.
+	(read_struct_type): Ditto.  Also, add comments about how we can
+	deduce TYPE_VPTR_FIELDNO from inheritance info and fieldname info.
+	* coffread.c (decode_base_type): Allocate TYPE_CPLUS_SPECIFIC for
+	TYPE_CODE_STRUCT.
+	(read_struct_type): Ditto.
+	* dwarfread.c (struct_type): Ditto.
+
+	* symtab.c (read_range_type): Don't set TYPE_MAIN_VARIANT.
+	(lookup_pointer_type): Don't use or set TYPE_MAIN_VARIANT.
+	(lookup_reference_type): Ditto.
+
+	* cplus-dem.c: Many changes made to handle decoding of
+	ANSI-mangled names.
+	* symtab.c (gdb_mangle_name): Mangle/demangle ANSI-mangled names
+	as well.
+
+Fri Nov 15 17:57:59 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c (parse_partial_symbols):  patch to keep DEC C
+	compiler from making gdb bomb out.  Thanks to Ed Santiago!
+
+Thu Nov 14 19:27:30 1991  Fred Fish  (fnf at cygnus.com)
+
+	* symfile.c:  Add function compact_misc_function_vector() to
+	remove duplicate misc function vector entries.  See comments
+	in source for why this is necessary/desirable.
+
+	* dwarfread.c:  Add misc function type parameter to internal
+	record_misc_function().  Remove calls to init_misc_bunches()
+	and condense_misc_bunches(), these are now done in elfread.c.
+
+	* elfread.c:  Add support for reading bfd canonical symbol tables
+	and generating misc function vector entries for global and
+	absolute symbols.  Do calls to init_misc_bunches() and
+	condense_misc_bunches() where they will enclose all calls to
+	record_misc_function(), including those in dwarfread.c.
+
+Thu Nov 14 17:02:11 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/Makefile.in: new targets gdb.me, gdb.ms, gdb.mm
+	(roffable documentation).
+	* doc/gdb.texinfo: embedded hints (as comments) for better
+	texi2roff conversion.
+
+Thu Nov 14 13:18:25 1991  John Gilmore  (gnu at cygnus.com)
+
+	* m88k-tdep.c (examine_prologue):  Deal with OR instructions
+	that shuffle parameters into other regs.
+	* symtab.c (decode_line_1):  Fix bug introduced in Per's change
+	of Nov 12th.
+
+Wed Nov 13 19:51:11 1991  Steve Chamberlain  (sac at cygnus.com)
+
+	* Makefile.in, xconfig/delta88 made it install a sysV manual page;
+	gdb.z into the right place.
+
+Wed Nov 13 16:45:13 1991  John Gilmore  (gnu at cygnus.com)
+
+	Motorola 88000 port without tears, I mean without tdescs.
+
+	* m88k-tdep.c:  Blow away all tdesc stuff.
+	Provide functions for all the frame-related macros in
+	tm-delta88.h.  Adopt i960-style EXTRA_FRAME_INFO.
+	(examine_prologue, frame_find_saved_regs, skip_prologue):  borrow
+	from i960-tdep.c and adapt to the function prologues on the 88k.
+	(read_next_frame_reg):  Borrow from mips-tdep.c.
+	FIXME:  frame_locals_address should go away.
+
+	* tm-delta88.h:  Dump all the tdesc stuff.
+	Macros for all frame-related stuff call fns of same name.
+	Remove duplicated definitions.  FP_REGNUM becomes same as
+	SP_REGNUM.  
+
+	* xm-88k.h:  Eliminate lots of library dependencies, now handled
+	in libiberty.  Eliminate KDB nonsupport.
+
+	* doc/gdbint.texinfo:  Add rudiments on frames.  FIXME, add more.
+
+
+	* stack.c (frame_info):  Mark frameless functions.
+	Print locals address (FIXME, remove if same).
+	* blockframe.c:  Comment changes, FIXME after.
+	* coffread.c:  Even without TDESC, need to zap "@" symbols.
+	Don't register for wierd format names; change the names in BFD.
+
+	* alloca.c, language.c, tdesc.c:  Lint.
+	* tdesc.c, tdesc-lib: FIXME:  remove these.
+
+Tue Nov 12 19:30:22 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Add tdesc library support.  Fixups to lint,
+	copying.c rules.
+
+Tue Nov 12 13:43:26 1991  Per Bothner  (bothner at cygnus.com)
+
+	* symtab.c (decode_line_1):  Remove spurious call to operator_chars.
+
+	Allow setting breakpoints on C++ destructors.
+	* valops.c (destructor_name_p):  Don't check TYPE_HAS_DESTRUCTOR,
+	since it lies.  Rely on callers to catch missing destructors.
+	* symtab.c (decode_line_1):  For example (see above), here.
+	* buildsym.c, symtab.h:  Remove TYPE_FLAGS_HAS{CON,DE}STRUCTOR
+	flags since they are no longer used.
+
+	Fixes to support C++ methods with functional parameters.
+	* c-exp.y (func_mod rule):  Allow (and ignore) list of parameter
+	types in a function type.
+	* eval.c (parse_and_eval_type), value.h:  New function,
+	parse_and_eval_type, is based on old code from check_stub_method.
+	But don't actually evaluate the cast, since that calls
+	value_cast(), whcih may fail.  Just extract the type
+	from the parsed expression.
+	* values.c (check_stub_method):  While looping through the
+	arguments, adjust depth *after* parameter has been handled.
+	Replace call and setup of parse_and_eval with new function
+	parse_and_eval_type.
+
+Tue Nov 12 09:40:07 1991  Fred Fish  (fnf at cygnus.com)
+
+	* utils.c, rem-multi.shar:  Remove fixed arg count version of
+	concat().
+
+	* altos-xdep.c, arm-xdep.c, coffread.c, command.c, convex-xdep.c,
+	core.c, dwarfread.c, gould-xdep.c, infcmd.c, language.c,
+	m88k-xdep.c, main.c, printcmd.c, pyr-xdep.c, source.c,
+	sun386-xdep.c, symm-xdep.c, umax-xdep.c, values.c, xcoffread.c:
+	Change all instances of use of fixed args concat() to variable
+	args concat() now located in libiberty.
+
+Tue Nov 12 07:23:46 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Add xcoffread.c, xcoffexec.c.
+	* xcoffread.c:  New file for handling AIX mangled-coff files.
+	* xconfig/rs6000, tconfig/rs6000:  New files.
+	* buildsym.c:  Add hooks for xcoffread.c.
+	* rs6000-pinsn.c, rs6000-tdep.c, rs6000-xdep.c, tm-rs6000.h,
+	xm-rs6000.h, rs6k-opcode.def, rs6k-opcode.h:  New files.
+	* xcoffexec.c:  New file for handling AIX shared libraries.
+
+Mon Nov 11 19:14:31 1991  Fred Fish  (fnf at cygnus.com)
+
+	* core.c:  Minor rewording of message to user containing name of
+	(and possibly arguments to) the program that generated a core
+	file.
+
+	* elfread.c:  Remove the register_addr() stub now that it is no
+	longer needed.
+
+	* procfs.c:  Move misplaced #endif for ATTACH_DETACH.  Add new
+	fetch_core_registers() function for core file support.
+
+Sat Nov  9 13:37:57 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (dwarf_psymtab_to_symtab):  Remove leftover call
+	to do_cleanups() which resulted from a previous change.
+
+	* elfread.c:  Re-enable compilation of register_addr() stub
+	whenever it is not supplied by coredep.c
+
+Sat Nov  9 00:40:32 1991  John Gilmore  (gnu at cygnus.com)
+
+	Add tracking of object files (that contain symbols) to gdb.
+	This includes a "struct objfile" that owns symtabs and psymtabs
+	that were read in from that binary file.
+
+	* symfile.h:  Add struct objfile.  Add pointer to the objfile
+	into the struct sym_fns.
+	Replace global `symfile' and `symfile_mtime' with
+	`symfile_objfile'.  Add global object_files chain.
+
+	* symfile.c:  Move param.h above symtab.h.
+	(sort_misc_function_vector):  Add.
+	(syms_from_objfile):  Was syms_from_bfd.
+	(symfile_open):  Now returns objfile.
+	(allocate_objfile):  New.
+	(free_objfile):  New, replacing free_all_.*symtabs.
+	(symfile_init):  Takes objfile arg, puts it in sym_fns result.
+	(reread_symbols):  Searches whole chain of objfiles.
+	(allocate_symtab):  Takes objfile as new parameter, chains them.
+	Handle INIT_EXTRA_SYMTAB_INFO.
+	(free_all_psymtabs, free_all_symtabs):  Move here from symmisc.c.
+
+	* dbxread.c:  Make more errors into complaints.
+	(push_subfile, pop_subfile):  Move to buildsym.c.
+	(dbx_symfile_read, dbx_symfile_init, fill_symbuf, read_dbx_symtab,
+	start_psymtab, psymtab_to_symtab_1, read_ofile_symtab,
+	dbx_psymtab_to_symtab, ):  Use bfd ops, don't use file descriptor.
+	Pass objfile.  Change callers.
+	(fill_symbuf, SWAP_SYMBOL):  Take bfd as arg.
+	(read_dbx_symtab):  Just wipe out new symbols, not all, on error.
+	(end_psymtab):  Blow away psymtab if empty.
+	(process_symbol_pair):  Swallow into read_ofile_symtab.
+	(process_one_symbol):  Use push_context and pop_context.
+	(virtual_context):  Delete #if 0'd obsolete stuff.
+
+	* buildsym.c (end_symtab):  Pass objfile.
+	(dbx_lookup_type):  Handle null typevector.
+	(dbx_alloc_type):  Check file number, not sym number, for -1.
+	(find_symbol_in_list):  Add for xcoffread.
+	(start_symtab):  Default typevector is empty.  Keep reusing same
+	context_stack.
+	(end_symtab):  Take objfile argument and pass it to
+	allocate_symtab.  Don't make a symtab if no blocks or symbols.
+	Handle empty typevector.
+	(push_context):  New function for context stack nesting.
+	(read_type):  Mark FIXME where we need to reintroduce type smashing.
+
+	* buildsym.h (pop_context):  Macro, paired with push_context.
+	(subfile_stack):  Move here from dbxread.c.
+
+	* coffread.c (end_symtab, read_coff_symtab):  Take and use objfile arg.
+	(read_coff_symtab):  Cleanup by freeing objfile, not all symtabs.
+
+	* mipsread.c (read_mips_symtab, parse_partial_symbols, parse_fdr,
+	new_psymtab, new_symtab):  Take and use objfile arg.
+
+	* dwarfread.c (scan_compilation_units, start_psymtab,
+	process_dies, end_symtab, dwarf_build_psymtabs,
+	read_lexical_block_scope, read_func_scope, read_file_scope):  Take
+	and use objfile argument.
+	(psymtab_to_symtab_1, read_ofile_symtab):  Don't take or use file
+	descriptor.  Use BFD internal functions instead.
+	(end_symtab):  Call global allocate_symtab.
+
+	* elfread.c, target.c:  Minor changes to accommodate objfiles.
+	* symtab.h:  partial_symbol_table has no symfile_name member now.
+	(fn_fieldlists voffset):  avoid non-int bitfield.
+	(struct symtab):  Add objfile * and objfile_chain * of symtabs.
+	(struct partial_symtab):  Add objfile * and objfile_chain * of
+	psymtabs.  Remove symfile_name.
+
+	* symmisc.c:  Lose free_all_symtabs, free_all_psymtabs.
+	(printsyms_command):  Rename from print_symtabs.  Add selective
+	listing if 2nd argument given.  Print objfile info.
+	(printpsyms_command):  Rename from print_partial_symtabs.  Ditto all.
+	(printobjfiles_command):  New; prints objfiles lists, and checks
+	for consistency of symtab, psymtab, and objfile lists.
+
+	* symfile.h, symfile.c, symtab.h:  Lint
+
+Fri Nov  8 23:38:48 1991  John Gilmore  (gnu at cygnus.com)
+
+	* command.c:  Include param.h.
+	* defs.h (warning_setup, warning):  Declare.
+	* expprint.c (print_subexp, UNOP_MEMVAL case):  Lint.
+	* inflow.c (new_tty):  Use USE_O_NOCTTY #define.
+	* language.c, printcmd.c (print_scalar_formatted), signame.c,
+	stack.c:  lint.
+
+Thu Nov  7 18:26:15 1991  Steve Chamberlain  (sac at rtl.cygnus.com)
+
+	* Makefile.in: link with libiberty after libreadline, since
+	readline might want something in libiberty.
+	* m88k-xdep.c: Fixed the register offsets in the ptrace_user
+	struct for BCS 88k machines.
+	* xm-m88k.h: don't define USIZE if already defined.
+	* configure.in: Added delta88 target.
+
+Thu Nov  7 04:51:19 1991  John Gilmore  (gnu at cygnus.com)
+
+	* am29k-pinsn.c, am29k-opcode.h:  Fix decoding of mtacc, dmac, fmac.
+
+	* tm-*.h:  Remove READ_DBX_FORMAT, COFF_FORMAT, and
+	READ_MIPS_FORMAT, which have been unused since BFD.  Still
+	remaining is COFF_NO_LONG_FILE_NAMES.
+	* tm-sun3.h, tm-altos.h:  Remove detritus accidentally left from
+	function calling code moved to m68k-tdep.c.
+
+Wed Nov  6 17:21:59 1991  John Gilmore  (gnu at cygnus.com)
+
+	* coffread.c:  Eliminate c_nsyms in favor of c_naux.
+	Complain if no auxents on .bf and .ef FCN symbols, and assume
+	lots of line numbers.
+	(init_linenos, enter_linenos):  Use a sentinel at the end of the
+	read-in linenos, to make for a fast, safe loop-end test.
+
+Wed Nov  6 02:54:08 1991  Steve Chamberlain  (sac at cygnus.com)
+
+	* coffread.c (read_coff_symtab): coffread used to rely on the
+	x_sym.x_misc.x_lnsz.x_lnno field giving the # of linnos in a
+	function. Two of the formats I'm using (29k and 88k) don't seem to
+	set it. Ths patch to fcn_last_line and (enter_linenos) is an
+	attempt to use the actual size of the linno table in the file to set
+	the number of linenos to process.
+
+Tue Nov  5 22:47:46 1991  Steve Chamberlain  (sac at cygnus.com)
+
+	* Makefile.in: put a - infront of the mv y.tab.c c-exp.tab.c and
+	mv y.tab.c m2-exp.tab.c, so that if bison is used, and the files
+	are created in place, so the mv fails, then the make continues.
+
+Tue Nov  5 16:47:47 1991  Per Bothner  (bothner at cygnus.com)
+
+	Add C++ as a separate language.
+	* defs.h (enum language): Add language_cplus.
+	* dwarfread.c (end_symtab):  Support language_cplus.
+	* c-exp.y:  Add new struct language_defn cplus_language_defn.
+	Don't set c to be the default language (see main.c).
+	* c-exp.y (yylex):  Only look for field of this if
+	language is C++.  (First difference from C!)
+	* language.c:  Add case branches for C++ (currently, all
+	the same as C).  Also, add c++ to "usage" note for "set lang".
+	* valprint.c (typedef_print).  Add case branches for C++. 
+	* main.c (main):  New way to set initial language:  Look at
+	file extension of psymtab containing main().  (Same as we
+	do for symtabs, but avoid loading the symtab yet.)
+	* symtab.c: New routine find_main_psymtab(), used by main()
+	to set initial language.
+	* symfile.c (allocate_symtab):  Move code for mapping file
+	extensions-> languages to new deduce_language_from_filename().
+
+	Fix a C++ problem when looking for methods in super-classes.
+	There was confusion between base and derived types.
+	* valops.c (value_fn_field):  Change function interface.
+	* values.c:  Use new value_fn_field interface.
+
+Mon Nov  4 10:49:33 1991  Per Bothner  (bothner at cygnus.com)
+
+	* infrun.c:  Fixed typo in comment.
+	* utils.c:  All the v*fprintf emulation is now in libiberty,
+	so we can get rid of some junk.
+	* xm-sun3os4.h, xm-sun4os4.h, xconfig/decstation, xconfig/i386sco,
+	xconfig/sun3os4, xconfig/sun4os4: Don`t need HAVE_STRSTR any more.
+	* m68k-pinsn.c (print_insn_arg):  Support BB/BW/BL
+	type operands, as used by branch instructions.
+	* gmalloc.c: Fix prototype of memcpy.
+	* elfread.c: Comment out register_addr, since it conflicts
+	with the one in coredep.c.
+	* buildsym.h:  Remove extern declarations of two functions
+	that are really static in buildsym.c.
+	* tm-mips.h: Add symbolic names for more registers.
+	* mips-xdep.c (store_inferior_registers): Use new register names.
+	* xm-mips.h: Simplify REGISTER_U_ADDR, since it is now
+	only used for core files, not ptrace.  Therefore,
+	the KERNEL_U_ADDR hack is no longer needed.
+	The mapping to ptrace number is now in in mips-xdep.c.
+	* mips-xdep.c:  Define REGISTER_PTRACE_ADDR (using the
+	mapping from the old REGISTER_U_ADDR), and use it
+	in {fetch,store}_inferior_registers.
+	* mipsread.c: Rename #include ecoff.h to new name coff-mips.h.
+	* mips-tdep.c (mips_push_dummy_frame, mips_pop_frame):
+	Save/restore FP regs correctly (?).
+	* dbxread.c: Remove duplicate define_symbol and type_synonym_name
+	(these had been previously moved to buildsym.c).
+	Hence, define_symbol becomes extern instead of static.
+	* buildsym.c (read_struct_type):  Comment out bogus handling
+	of C++ operator methods.  Minor hacking of reading of class
+	contexts. Make define_symbol non-static, so dbxread.c can call it.
+
+Fri Nov  1 11:05:47 1991  John Gilmore  (gnu at cygnus.com)
+
+	* mipsread.c (read_mips_symtab, read_the_mips_symtab):  Use real
+	filename with error messages.
+	* stack.c (frame_select_command):  Rename to select_frame_command
+	to avoid "fr" and "fra" having nonunique completions.
+	* symfile.c (sort_symtab_syms):  Ignore sort of zero symtab *.
+	(symfile_init):  Print file format name when unable to handle it.
+	(free_named_symtabs):  Use BLOCKVECTOR rather than obsolete BLOCKLIST.
+	* symmisc.c (free_symtab):  Only free linetable if nonzero.
+	* symtab.h:  Remove obsolete BLOCKLIST macros.
+
+Thu Oct 31 18:12:43 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  another stepi/nexti fix.  Ensure
+	that stop_step is 1 at bottom of main loop.  I don't know why this
+	needs to be done, but it helps me sleep better at night.
+
+Sun Oct 27 18:18:39 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* main.c (initialize_history):  Read history after reading all
+	init files.
+
+Sun Oct 27 14:09:25 1991  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c:  Break out initial malloc sizes.
+	(record_line):  Record directly in a subfile.  Alloc on demand.
+	(compare_line_numbers):  Add from xcoffread.c.
+	(end_symtab):  New params say whether to sort pendings and
+	linetable.  Patch block stabs if defined.  Shrink linetable before
+	allocating the symtab.
+	* buildsym.h:  Delete line_vector* and prev_line_number.  Add 
+	global_stabs and file_stabs for xcoffread.
+	* dbxread.c (start_subfile):  Move to buildsym.  Change above calls.
+	* symtab.h:  LINETABLE(symtab) can now be null.  Zap LINELIST.
+	* symmisc.c, symtab.c:  Cope with null LINETABLEs.
+
+	* blockframe.c:  Pass fromleaf to INIT_EXTRA_FRAME_INFO.
+	* tm-29k.h, tm-88k.h, tm-i960.h, tm-irix3.h, tm-mips.h, tm-pyr.h,
+	tm-sparc.h:  Accept fromleaf parameter.
+	* c-exp.y (yyerror):  Pass error message if given.
+	* configure.in:  Add rs6000 host and target.
+	* inflow.c (new_tty):  O_NOCTTY kludge for RS/6000.
+	* symfile.h (entry_point):  Add.
+
+Sat Oct 26 00:16:32 1991  John Gilmore  (gnu at cygus.com)
+
+	* buildsym.c:  New file.  Breaks out symbol-table-building routines
+	from dbxread.c, so they can be shared with xcoffread.c.
+	* buildsym.h:  New file.  Declarations for buildsym.c users.
+	* dbxread.c:  Remove large chunks into buildsym.c.
+	* Makefile.in:  Add buildsym.c and buildsym.h.
+
+	* symfile.c (syms_from_bfd):  New routine.
+	(add_symbol_file):  Call it to do the real work.
+	(syms_from_bfd):  Initialize entry_point before calling symfile_init.
+	* symtab.h, symfile.c, coffread.c, mipsread.c, dwarfread.c:
+	Avoid declaring or setting entry_point (symfile.h & symfile.c cope).
+
+Fri Oct 25 10:58:16 1991  Mark Eichin  (eichin at cygnus.com)
+
+	* cplus-dem.c (cplus-demangle): added support for templates, static
+	data, and the new (correct) mangling for destructors.
+
+	* dwarfread.c: (dwarfwarn): created a varargs version of
+	dwarfwarn, for non __STDC__ compilers.
+
+	* c-exp.y: (yylex): added match for "template" token.
+	(typebase): added TEMPLATE name '<' type '>' clause, for explicit
+	specification of template types.
+
+	* symtab.c: (lookup_template_type): new function for finding
+	templates in symbol table.
+	(type_name_no_tag): changed to explicitly check for s/u/e at the
+	beginning of the symbol - if it is a template, none of these will
+	be there (but the name will still contain spaces.)
+
+Fri Oct 25 18:59:32 1991  Per Bothner  (bothner at cygnus.com)
+
+	Various fixes to improve g++ debugging.
+	* symtab.h:  Add is_const and is_volatile flags for each method.
+	These are bit fields - take their space from voffset,
+	which shrinks to 30 bits.  Since voffset is now a bitfield,
+	make it unsigned for portability.  This changes its interpretation
+	slightly:  Static methods now have voffset 1 instead of -1,
+	and virtual offsets start at 2, not 1.
+	* symtab.c:  Renamed gdb_mangle_typename to gdb_mangle_name,
+	since it now returns an entire magled method name, not just
+	the type part.  This avoids some duplication.
+	It also allows us to correctly mangle const and volatile
+	methods (using the new is_const and is_volatile bit fields
+	mentioned above).
+	* valprint.c (type_print_base), values.c (check_stub_method):
+	Simplify by using new gdb_mangle_name.
+	* values.c (value_headof):  Fix to correctly handle single
+	inheritance (actually two fixes, either of which suffices).
+	* dbxread.c (read_struct_type):  Handle const and volatile
+	method specifiers.
+	* dbxread.c (read_struct_type):  Yet one more place where
+	we must handle '\\' continuations.
+	* valprint.c (vtbl_ptr_name): Add final '\0'.
+
+Fri Oct 25 16:06:38 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* tm-sparc.h, tm-68k.h (EXTRACT_RETURN_VALUE):  fix output of
+	short return values for sparc and 68k.  Patch from Paul Eggert.
+
+	* coffread.c, coredep.c, i386-xdep.c:  install patches for
+	SysV/386 3.2 from Mauro DePalma.
+
+Fri Oct 25 02:02:13 1991  John Gilmore  (gnu at cygnus.com)
+
+	* core.c (core_file_info), exec.c (exec_file_info):  Print file
+	type.  Use printf_filtered.
+
+	* valops.c (value_fetch_lazy):  Avoid 0-length fetches.
+
+Thu Oct 24 23:06:40 1991  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c:  Add casts to remove compiler warnings.
+
+	* tm-3b1.h, tm-68k.h, tm-altos.h, tm-amix.h, tm-hp300bsd.h,
+	tm-hp300hpux.h, tm-isi.h, tm-news.h, tm-pn.h, tm-sun2.h,
+	tm-sun3.h:  Remove locally duplicated code for calling functions
+	in the inferior.  The only differences were in the specific trap
+	vectors used and whether or not an fpu was present.  These are
+	now handled by appropriate definitions of BPT_VECTOR and
+	HAVE_68881 respectively.  Other minor obvious cleanups.
+
+	* valops.c:  Correct a minor misspelling.
+
+	* utils.c:  Remove local BSD/USG hacks that are now in libiberty.
+
+	* dwarfread.c:  Remove prototype for dwarfwarn.  Does not work
+	with <varargs.h>.
+
+Thu Oct 24 09:33:44 1991  John Gilmore  (gnu at cygnus.com)
+
+	* stack.c (frame_command):  Always print.  Use new
+	frame_select_command to select a frame without printing.	
+
+	* dwarfread.c:  Use <varargs.h>, since <stdarg.h> is not portable.
+
+Thu Oct 24 01:32:51 1991  Fred Fish  (fnf at cygnus.com)
+
+        * dwarfread.c: New file for DWARF debugging format support.
+
+	* elfread.c: New file for ELF object file format support.
+
+	* procfs.c: New file for SVR4 /proc (process file system) support.
+
+	* tm-amix.h, xm-amix.h, tconfig/amix, xconfig/amix: New files for
+	Amiga UNIX support.
+
+	* xm-svr4.h, tm-svr4.h: New files for SVR4 support.
+
+	* xm-m68k.h: New file for host machines with m68k cpu.
+
+	* Makefile.in: Add elfread.c and dwarfread.c to SFILES_MAINDIR.
+	Add elfread.o and dwarfread.o to OBS.
+
+	* symfile.h: Add "elf" to list of supported formats in comment.
+
+	* c-exp.y, defs.h, symtab.h, valprint.c:  Add three new builtin
+	types to gdb, builtin_type_long_double, builtin_type_complex, and
+	builtin_type_double_complex.  Add and use new TARGET_SHORT_BIT,
+	TARGET_INT_BIT, TARGET_LONG_BIT, TARGET_FLOAT_BIT,
+	TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_COMPLEX_BIT, and
+	TARGET_DOUBLE_COMPLEX_BIT, as the sizes in bits of the indicated
+	types on the target machine (ala the existing TARGET_LONG_LONG_BIT).
+
+	* infrun.c:  When using SVR4 /proc interface instead of ptrace(),
+	call proc_set_exec_trap() to setup child to stop at first instruction.
+
+	* inftarg.c: When using SVR4 /proc interface, call proc_wait()
+	rather than wait().
+
+	* m68k-tdep.c: Add new routines supply_gregset(), fill_gregset(),
+	supply_fpregset(), and fill_fpregset(), which are machine
+	dependent support routines for SVR4 /proc interface.
+
+	* utils.c: Add warning_setup() and warning().  Warning() behaves
+	the same as error() except that it returns normally rather than
+	jumping back to command level.  Modules that don't want to call
+	warning() for some reason, but want to produce their own warnings,
+	can call warning_setup() to ensure compatibility with the way
+	warning() and error() deal with the terminal.
+
+	* symtab.c: Make internal errors produce more useful messages.
+
+	* tm-68k.h: Move code that is duplicated in almost every single
+	m68k based machine's configuration files to this common file.
+	Duplications in the configuration files still need to be removed
+	(FIXME).
+
+	* infrun.c (child_create_inferior): System V versions must call
+	setpgrp() with no arguments, to comply with prototyping typically
+	in <unistd.h>.
+
+	* munch: Add support for SVR4 style nm output.
+
+	* dbxread.c, mipsread.c symmisc.c, symtab.c:  Remove the object
+	file specific fields from the partial symbol table structure and
+	replace them with a pointer to private data for each different
+	flavor of object file reader to initialize appropriately.
+
+Wed Oct 23 09:38:20 1991  John Gilmore  (gnu at cygnus.com)
+
+	* xconfig/sun[34]os4:  Add note about strstr botch on sunos4.0.3c
+	and previous.
+
+	* mipsread.c (fixup_undef_type):  New function.  If a struct /
+	union / enum is defined in a header file but nowhere else used,
+	(by typedefing, pointer referencing or declaration) the mipsread code
+	builds the complete tree for the structure but leaves its code as
+	TYPE_CODE_UNDEF as it doesn't know what kind of aggregate it is.
+	Guess its type based on the details of the members.
+
+Tue Oct 22 18:04:32 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Check return value from
+	find_pc_line.
+
+Mon Oct 21 17:47:03 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  fix stepi/nexti that was broken
+	by my last edit to this routine.
+
+Mon Oct 21 14:27:43 1991  John Gilmore  (gnu at cygnus.com)
+
+	* tm-sun3.h (FIX_CALL_DUMMY): problem with cross debugging.
+	FIX_CALL_DUMMY does unaligned accesses and/or forgets to byte swap
+	the values before putting them into the dummy code.  (From Peter
+	Schauer)
+
+Mon Oct 21 10:04:39 1991  Steve Chamberlain  (steve at rtl.cygnus.com)
+
+	* configure.in: added ebmon target.
+
+Wed Oct 16 22:49:58 1991  John Gilmore  (gnu at cygnus.com)
+
+	GDB-4.2 release!
+
+	* Makefile.in:  Roll VERSION to 4.2.
+	* README, TODO, WHATS.NEW:  Update.
+
+	* core.c (core_open):  Improve error message for bad file.
+	Pass .reg virtual memory address to fetch_core_registers to help
+	it find the registers in the core-file header.
+	* coredep.c (fetch_core_registers):  Take new argument, use it,
+	and pass it to register_addr to locate the block of registers.
+	* xm-mips.h:  Update KERNEL_U_ADDR for new scheme.  Cleanup a bit.
+
+	* dbxread.c (read_dbx_symtab, process_one_symbol):  Handle
+	Sequent N_FN_SEQ like everybody else's N_FN.
+
+	* main.c:  Circumvent SCO cc bug with #if !!defined(USG).
+	* tm-i386v.h:  #endif guck.
+	* xconfig/i386*:  Remove -Dgetpagesize()=4096 kludge.
+	* xconfig/i386sco:  Add HAVE_STRSTR to avoid ANSI bdeath.
+	* xconfig/tahoe:  Add REGEX, which seems to be missing.
+
+	* coredep.c:  Add <sys/types.h> for SCOnix.
+	* dbxread.c (read_dbx_symntab):  Avoid coredump on malformed file.
+	* printcmd.c (print_formatted):  Flush output before disassembly.
+
+Tue Oct 15 20:12:32 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* doc/refcard.tex (sec "Working Files"): consistent metavars and
+	other improvements, due to comments by François Pinard
+	(pinard@iro.umontreal.ca) 
+
+	* doc/gdb.texinfo (appendix "Installing GDB"): changes in
+	configure, and improvenets related to Pinard's refcard comments
+
+Tue Oct 15 08:45:12 1991  John Gilmore  (gnu at cygnus.com)
+
+	Changes from Fred Fish:
+	* tm-68k.h (FPI_REGNUM):  Add.
+	* infrun.c (child_create_inferior):  flush stdout and stderr
+	before forking.
+	* configure.in:  Handle amigados, amix hosts and targets.
+	* inflow.c:  Handle TIOCGLTC_BROKEN for Amiga.
+
+	From Andreas Schwab:
+	* values.c (show_convenience):  Use printf_filtered.
+	* main.c (define_command):  Check result of lookup_command for
+	exact match.
+	(echo_command):  Use printf_filtered, and force output out.
+
+	* dbxread.c (read_enum_type):  Avoid Modula-2 kludge that breaks C
+	programs.
+	* i387-tdep.c (double_to_i387):  Fix typo for double_to_ieee_extended.
+	* utils.c (_initialize_utils):  If !ISATTY, don't paginate.
+	* configure.in, tconfig/decstation, xconfig/decstation:  Rename
+	dec3100 to decstation.
+
+Mon Oct 14 13:37:50 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/gdb.texinfo: Catch up to changes recorded here in ChangeLog
+	(nodes Continuing and Stepping; Memory; Targets) clarifications
+	due to Larry Breed
+
+Fri Oct 11 23:27:06 1991  John Gilmore  (gnu at cygnus.com)
+
+	* tm-{irix3,mips,nindy960,pn,symmetry,vx960}.h:  Move
+	REGISTER_U_ADDR to corresponding xm- file.  Sugg. by Peter Schauer.
+
+	* symmisc.c (print_partial_symtabs):  Add printpsyms debug cmd.
+
+	* m68k-tdep.c (m68k_push_dummy_frame, m68k_pop_frame):  Add
+	generic routines for calling inferior functions.
+
+	* blockframe.c (inside_main_scope, inside_entry_scope):  New.
+
+	* copying.awk:  Filter formfeeds out of copying & warrantee.
+	Make them available as `show copying' and `show warrantee' also.
+	* main.c (print_gnu_advertisement):  Advt `show' commands.
+
+Thu Oct 10 17:25:47 1991  John Gilmore  (gnu at cygnus.com)
+
+	* mach386-xdep.c:  Even when cross-compiling, leave in the
+	core-file reading code.
+	* core.c (get_core_registers):  Avoid coredump if no .reg section.
+
+Wed Oct  9 17:03:34 1991  John Gilmore  (gnu at cygnus.com)
+
+	* mipsread.c, coffread.c:  initialise TYPE_VPTR_FIELDNO to -1.
+	This avoids coredumps under `set print object on' in value_headof
+	(called erroneously by value_from_vtable_info) for `p &struct'
+	or `p *struct'.  From Peter Schauer.
+
+Mon Oct  7 00:06:52 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll version to 4.1.2.
+	* dbxread.c:  Use aout64.h, not a.out.gnu.h.  Get external symbol entry
+	size from BFD (but, FIXME, we don't yet read external nlists's and
+	convert them to internal nlists's before handling them -- we still
+	assume they have the same size and alignment.)  Use SET_NAMESTRING
+	everywhere useful.
+	* exec.c (exec_file_command):  Move dead coff-encapsulation code
+	to BFD.
+	* m88k-tdep.c, m88k-xdep.c:  Remove encap test and #inc <a.out.h>.
+
+Fri Oct  4 22:30:06 1991  John Gilmore  (gnu at cygnus.com)
+
+	* configure.in, tm-i386v.h, xm-i386v.h: Intel 386 Mach host port.
+	* xm-i386mach.h, mach386-xdep.c, xconfig/i386mach:  New files.
+
+Fri Oct  4 17:04:31 1991  Per Bothner  (bothner at cygnus.com)
+
+	More patches from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
+	* mips-xdep.c (store_inferior_registers):  Don't try to
+	write the (pseudo) FP.
+	* mipsread.c (parse_partial_symbols):  Improved algorithm for
+	setting pst->texthigh.
+
+Fri Oct  4 16:47:32 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/Makefile: make TEXINPUTS include . everywhere
+
+Fri Oct  4 00:35:56 1991  John Gilmore  (gnu at cygnus.com)
+
+	* coffread.c, dbxread.c, symfile.c, symmisc.c, symtab.h:  Remove
+	vestiges of typevectors, which were for symsegs and are no longer
+	used.  (From a question by Eliot Dresselhaus
+	<dresselh@RFT30.nas.nasa.gov>).
+
+Thu Oct  3 09:33:26 1991  John Gilmore  (gnu at cygnus.com)
+
+    	* dbxread.c, coffread.c:  static-ize functions that were
+	gratuitiously external.  (From Fred Fish.)
+
+	* c-exp.y:  sym->class to SYMBOL_CLASS (sym).
+
+	* dbxread.c (dbx_lookup_type):  Keep doubling size of typevector
+	until it is large enough.    
+
+	* dbxread.c (read_type):  Handle error case slightly better.
+	Make complaint message not C++-specific.
+
+Wed Oct  2 17:21:07 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Fix step/next so that you only
+	stop at the beginning of a new line.  This fixes various problems
+	with for loops, nested if-else's and switch statements.
+
+Tue Oct  1 06:33:55 1991  John Gilmore  (gnu at cygnus.com)
+
+	* symtab.c (lookup_symtab_1, lookup_symbol):  "fatal" errors
+	between symtabs and psymtabs become ordinary error()s.
+
+	* dbxread.c (read_dbx_symtab):  Relocate end_of_text_addr
+	properly, making "end pc" correct in shared lib psymtabs.
+	(From Guy Harris <guy@auspex.com>.)
+
+Mon Sep 30 13:15:31 1991  John Gilmore  (gnu at cygnus.com)
+
+	* dbxread.c:  Enable, but soften, const_vol_complaint.
+	(read_dbx_symtab):  N_STSYM and N_LCSYM define static vars.
+	Ditto Gould N_NBSTS and N_NBLCS.  Also, all types in the psymtab
+	should be file-scope, not global.
+	(read_struct_type):  Remove ancient multiple-inheritance warning.
+	(read_range_type):  Check base type, complain & patch if undefined.
+	* stack.c (frame_info):  Demangle the function name in `info stack'.
+	(From Peter Schauer)
+
+Sat Sep 28 10:02:33 1991  John Gilmore  (gnu at cygnus.com)
+
+	* eval.c (evaluate_subexp_for_address):  Don't use
+	TYPE_POINTER_TYPE directly (it might be zero if this type has
+	never had a pointer created before); use lookup_pointer_type.
+	* symtab.c (lookup_method_type):  Arguments were swapped in all
+	callers, so fix it here.  I'm amazed this worked at all!
+
+Fri Sep 27 18:09:31 1991  John Gilmore  (gnu at cygnus.com)
+
+	* c-exp.y, m2-exp.y:  Define more yysymbols that happen to be
+	"bss" rather than "data" symbols, but which still conflict.
+	* m2-exp.y:  Lint.
+
+	* coffread.c (coff_symfile_read):  Use xmalloc, not malloc.
+	* core.c (core_files_info):  Shorten output.
+	* exec.c (exec_files_info):  Ditto.
+	(build_section_table):  Ignore zero-length sections.
+	* language.c, printcmd.c:  Lint.
+	* language.h (get_frame_language):  Declare.
+	* saber.suppress:  update.
+	* stack.c (find_relative_frame):  Remove complex code that was
+	#if 0'd, stick with simple code.  Lint.
+        * saber.suppress:  Update a bit.
+	* symfile.c (add_symbol_file_command):  Add "?" to question.
+	* utils.c (parse_escape):  Avoid \a due to bdead compilers.
+	* value.h:  Declare typedef_print.
+
+	* valprint.c (val_print, type_print_base):  TYPE_CODE_RANGE less
+	kludgey.
+
+	* nindy-tdep.c (nindy_frame_chain_valid):  Use lookup_misc_func.
+	(Reported by Mark Peek <mark@imagen.com>.)
+
+	* solib.c (solib_map_sections):  Relocate all sections, even
+	though only the text section's size is tracked.  Mark ld_text
+	for eventual elimination as we generalize to N sections.
+
+	* infrun.c (wait_for_inferior):  Don't check if the PC is in a
+	call_dummy if we were stopped by a random signal that is being
+	passed to the program.  This produced wierd results when calling
+	functions in the inferior and signals (e.g. SIGALRM) were in use.
+
+Tue Sep 24 18:05:30 1991  John Gilmore  (gnu at cygnus.com)
+
+	* infrun.c (IN_SIGTRAMP):  Not parenthesized properly.
+	Bugfix from Paul Eggert <eggert@twinsun.com>.
+	* tm-ultra3.h (IN_SIGTRAMP):  Ditto.
+	* valprint.c (print_floating):  Print 9 digits for IEEE floats.
+	From Paul Eggert.
+
+Mon Sep 23 15:50:07 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll VERSION to 4.1.1.
+	* source.c (line_info):  Peter Schauer fixes a bug I introduced in
+	hex conversion.
+
+Fri Sep 20 16:10:52 1991  John Gilmore  (gnu at cygnus.com)
+
+	GDB-4.1 release!
+
+	* Makefile.in (VERSION):  Set to 4.1.	
+	* language.c (set_language_command):  Print useful help message,
+	and restore the language string after giving help.
+	* valprint.c (typedef_print):  Print typedef in C or M2.
+	* symtab.c (list_symbols):  Use it.
+	* main.c (main):  Avoid any output before (gdb) prompt when -q.
+	* language.c (set_language_command):  Handle errors by restoring
+	the language string to its current state (fix from A. Beers).
+	* doc/gdbint.texinfo:  Roll in information from README.  Rearrange
+	"how to install" and "how to print the doc" stuff so it drops
+	easier into README.
+	* configure.in:  Rename rtpc CPU to romp to match config.sub.
+	* README, WHATS.NEW, TODO:  Update for gdb-4.1.
+
+Fri Sep 20 17:39:14 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/gdb.texinfo: Updates from ChangeLog.  set/show write, 
+	autoloading shared libs, copyright etc on GDB startup, clean up $_
+	and $__ index refs, set/show listsize and related updates to list
+	cmd.  New host/target configs.
+
+Fri Sep 20 15:46:00 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/Makefile: generate aux version-no file doc/gdbVN.m4
+	from main Makefile.in version definition
+	doc/gdb.texinfo: use version recorded in doc/gdbVN.m4 for current
+	GDB version no refs 
+	Makefile.in (setup-to-dist): generate doc/gdbVN.m4 
+
+	* doc/gdb.texinfo: merge new language-switching and lang-specific
+	doc by Andrew Beers
+
+Fri Sep 20 15:00:57 1991  Per Bothner  (bothner at cygnus.com)
+
+	* mcheck.c: Add __ONEFILE kludge to allow compilation by non-ANSI
+	compilers (which may lack stddef.h).
+
+Fri Sep 20 13:29:42 1991  John Gilmore  (gnu at cygnus.com)
+
+	* dbxread.c (read_dbx_symtab, process_one_symbol):  N_FN and
+	N_WARNING are the same except for the N_EXT bit, so just use their
+	values alone, rather than OR-ing them with N_EXT.
+
+Fri Sep 20 12:27:55 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c (parse_lines):  Deal with negative extended line
+	offsets correctly.
+
+	* c-exp.y, m2-exp.y:  #define yyerrflag and yynerrs to avoid
+	global symbol conflicts.
+
+Fri Sep 20 02:28:15 1991  John Gilmore  (gnu at cygnus.com)
+
+	* .gdbinit:  Move 'set complaints' to top, so it runs even in
+	case we aren't debugging GDB.
+	* language.c (_initialize_language):  Fix type check and range
+	check documentation strings.
+	* utils.c (!HAVE_VPRINTF):  Define vfprintf as a function, so
+	language.c can use it.  (Though language.c should really not be
+	handling warnings/errors the way it does, FIXME.)
+	* symtab.c (lookup_primitive_type):  const lint.
+
+	Bugfix from Peter Schauer:
+	* source.c (lines_to_list):  Make signed, to avoid comparison
+	going unsigned and complaining that -3 is too high for 21 lines.
+	* stack.c (lines_to_list):  Ditto.
+
+Thu Sep 19 23:33:41 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in (HFILES):  Add minimon.h.
+	(VERSION):  Roll version number to 4.0.95.
+	(gdb.tar.Z, make-proto-gdb.dir, setup-to-dist, gdb-XXX.tar.Z):
+	New rules for building distributions.  Normal distribution
+	is built by doing `make -f Makefile.in gdb.tar.Z' in the directory
+	one level up from here; it calls make-proto-gdb.dir to build a
+	directory `proto-gdb' which is an image of the release.  The old
+	`gdb.tar.Z' rule still works too.
+	* config.sub, configure:  Roll in latest from ..
+
+Thu Sep 19 17:41:24 1991  Roland H. Pesch  (pesch at cygnus.com)
+
+	* doc/gdbint.texinfo: Reorder contents; reorganize new-host,
+	new-target, and new-config chapters; fix minor typos; come closer
+	to usual GNU markup conventions for @file @samp @code @var.
+
+Thu Sep 19 17:04:12 1991  Per Bothner  (bothner at cygnus.com)
+
+	Patches from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>:
+	* mipsread.c (parse_partial_symbols): Enter the name of all
+	structs/unions... into the psymtab so we can access them if the
+	symtab is not read in.
+	* mips-tdep.c:  Remove some unneeded #includes.
+	* xconfig/dec3100: Add HAVE_STRSTR.
+
+Thu Sep 19 15:14:23 1991  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Circumvent Sun Make bug on *-exp.tab.o.
+	* c-exp.y, m2-exp.y:  Lint.
+	* m2-exp.y:  Avoid using yytname[] which is a Bison-ism.
+	* valprint.c (val_print_fields):  Check for stub type.
+	* mipsread.c (_initialize_mipsread):  Avoid using
+	builtin_type_void at initialize time.
+	(mipscoff_symfile_read):  use it now.	
+
+Wed Sep 18 15:55:51 1991  John Gilmore  (gnu at cygnus.com)
+
+	Merge multiple-language support, and partial Modula-2 support,
+	from Andrew Beers <beers@cs.buffalo.edu>.
+
+	* i387-tdep.c:  New file, consolidates most 80387 support,
+	and eliminates host dependency on double<->extended conversions.
+	* i386-xdep.c, symm-xdep.c:  Remove most 387 support.
+	* xconfig/i386{sco,v,v-g,v32,v32-g}:  Now need i387-tdep.o.
+
+	* symfile.c (allocate_symtab):  New fn, consolidates the work
+	of allocating and initializing a new struct symtab.  Set the
+	language of the symtab based on its filename extension.
+	* symfile.h:  Declare it.
+	* mipsread.c (new_symtab):  Use it.  Minor formatting changes.
+	* dbxread.c (end_symtab):  Use it.
+
+	* mipsread.c (parse_symbol, case stParam and stProc):  Add #if 0'd
+	code for saving types of parameters with each function definition.
+	* dbxread.c (define_symbol, function and parameter cases):  Ditto.
+	(read_dbx_symtab, case N_DEFD):  Ignore.
+	(read_enum_type):  Recognize FALSE/TRUE enum as Modula-2 BOOLEAN.
+	(read_range_type):  Rename MAX_OF_TYPE to MAX_OF_C_TYPE, etc.
+	#if 0 out its uses, though, since they set a dead value.
+	* coffread.c (end_symtab):  Use allocate_symtab.
+	(process_coff_symbol):  #if 0'd for functions and params as above.
+	(read_enum_type):  Recognize Modula-2 BOOLEAN.
+	* symtab.c (add_param_to_type):  #if 0'd function to add a
+	parameter type to a function type's field list.
+
+	* defs.h (local_hex_format, local_hex_string, *_custom):  Add.
+	* i386-xdep.c, pyr-tdep.c, pyr-xdep.c, remote-vx.c, solib.c,
+	source.c, symfile.c, dbxread.c, breakpoint.c, core.c, exec.c,
+	i387-tdep.c, infcmd.c, mips-tdep.c, stack.c, printcmd.c:  Output
+	hex with local_hex_string for Modula-2 support.
+
+	* breakpoint.c (breakpoint_cond_eval):  Use new value_true to test
+	breakpoint condition language-independently.
+
+	* parse.c:  New file with the common code remains of expread.y.
+	* parser-defs.h:  New file with common declarations from expread.y.
+	* c-exp.y:  New file with the C parser from expread.y, and other
+	language-specific information.
+	* m2-exp.y:  New file with the Modula-2 parser and etc.
+	* expread.y, expread.tab.c:  Remove.
+	* breakpoint.c, eval.c, printcmd.c, expression.h:  Use
+	parse_expression and parse_exp_1 rather than parse_c_expression
+	and parse_c_1.
+
+	* symtab.h (enum languages):  Move to defs.h.
+	(enum type_code):  Add TYPE_CODE_CHAR and TYPE_CODE_BOOL.
+	Declare Modula-2 builtin types.
+	Add MAX_OF_TYPE and MIN_OF_TYPE macros.
+
+	* symtab.c (_initialize_symtab):  Remove builtin type
+	definition and initialization to *-exp.y.  
+	(lookup_primitive_typename):  Use language-dependent vector.
+	(lookup_typename):  Fix bug, make it work if primitive typename.
+	(lookup_unsigned_typename):  Call above.
+	(create_array_type):  Set up range type for array index.
+	(list_symbols):  Call typedef_print to print typedefs.
+
+	* values.c (unpack_long, value_from_longest):  Handle
+	TYPE_CODE_BOOL and TYPE_CODE_CHAR.
+
+	* expression.h (enum exp_opcode):  Add Modula-2 specific opcodes.
+	* expprint.c:  Look up expression opcodes in language-specific
+	table, based on expression's language.  Handle some Modula-2
+	specific opcodes.
+
+	* stack.c (frame_info):  Print language of stack frame.
+	(select_frame):  Also select language, if in auto-mode.
+	(get_frame_language):  New subroutine.
+	* main.c (execute_command):  Warn as language changes automatically.
+
+	* printcmd.c (ptype_command):  Parse types using the language
+	parser, both for language-independence, and so that scopes can
+	be specified.
+
+	* language.h, language.c:  New files for language-specific macros,
+	declarations, and definitions.
+
+	Misc fixes:
+
+	* main.c (main):  If error() is called during early
+	initialization, print its message and then exit(1) from GDB.
+
+	* valprint.c (type_print_base):  Avoid printing garbage for ints
+	of unusual sizes.
+	(_initialize_valprint):  Warn about host/target size assumption;
+	improve long long support slightly.	
+	
+	* convex-tdep.c (comm_registers_info):  Avoid parsing decimal and
+	hex -- let parse_and_eval_address do it.
+
+	* doc/gdbint.texinfo (Languages):  Doc how to add a language.
+
+	* Makefile.in:  Cope with new files and removed files.
+
+Tue Sep 17 08:37:41 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Add Andrew Beers' changes for Modula-2 support.  His ChangeLog
+	entries are enclosed herein.  Not all of these changes
+	have been merged into the master GDB sources -- check the
+	ChangeLog above here for the merge log.
+
+Mon Jun  3 17:05:45 EDT 1991
+
+     m2-exp.y       Created.  Tested outside of GDB for a few days.  Proper
+                    operators were added, C specific operators and tokens
+                    removed.  yylex() revamped to some extent.  Still things
+                    missing from the grammar, such as sets.
+                    Tested for two weeks in GDB v3.5.
+
+Tue Jun 11 17:23:48 EDT 1991
+
+     m2-exp.y       Added boolean constants TRUE and FALSE to the grammar
+                    so they are built-in.  Sort of a hack.
+
+Fri Jun 14 12:53:51 EDT 1991
+
+     m2-exp.y       Added range checking for numeric constants.  Any numeric
+                    constant is assumed to be of builtin type INTEGER unless:
+                    (1) it is octal or hexadecimal, in which case it is a
+                    CARDINAL; (2) it is too big to fit into an INTEGER, in
+                    which case it is a CARDINAL.
+     eval.c         Added simple range checking for +, -, and * on integers.
+                    Doesn't work very well for *, since 6 * 1,000,000,000 =
+                    1,705,032,704, which fails the simple test of result >=
+                    first_operand, no matter in what order the operands are.
+
+Tue Jun 18 14:11:30 EDT 1991
+
+     Broke the parser into parts, one containing the C grammar and the other
+     containing code to be shared by all of the grammars.
+
+     The following files no longer exist:
+
+          expread.y
+          expread.tab.c
+
+     The following files were added:
+
+          c-exp.y        (The C grammar)
+          m2-exp.y       (The Modula-2 grammar)
+          parser-code.c  (Code that is shared by the above grammar)
+          parser-code.h
+          parser-defs.h
+
+     Makefile.dist  Changed to reflect the above dependencies.  NOTE:  It is
+                    now necessary to use the Bison compiler compiler, since it
+                    will generate function/variable prefixes other than yy.
+
+Tue Jun 18 16:47:49 EDT 1991
+
+     symtab.[ch]    Added the external variable working_lang, than holds the
+                    value of the current working language.
+                    Added the ennumerated type language_mode, with the values
+                    language_auto and language_manual, the former meaning that
+                    GDB sets working_lang as needed, and the latter meaning
+                    that the value of working_lang is totally under user
+                    control.
+     symtab.[ch]    Added the Modula-2 pervasive types INTEGER, CARDINAL,
+                    REAL, BOOLEAN and CHAR.  Also added the type codes
+                    TYPE_CODE_BOOL and TYPE_CODE_CHAR.
+     utils.c        Added set_language_command and show_language_command to
+                    implement the GDB support commands "set language" and
+                    "show language".
+     expression.h   A number of identifiers were added to the type exp_opcode
+                    to facilitate Modula-2 builtin functions, integer
+                    division, and array indexing.
+
+Wed Jun 19 13:25:58 EDT 1991
+
+     language.h     Added the macro STRICT_TYPE, which evaluates to non-zero
+                    if the language specified by working_lang requires the use
+                    of strict typing of expressions.  Eventually, even this
+                    will be able to be changed by the user.
+                    Added the macro RANGE_CHECK, which evaluates to non-zero
+                    if the language specified by working_lang requires the
+                    checking of a value against the domain of its type.
+                    Eventually, even this will be able to be changed by the
+                    user.
+     language.[ch]  Predicates involving types (simple_type, ordered_type,
+                    same_type, integral_type, numeric_type, character_type,
+                    boolean_type, float_type) are added.  These predicates are
+                    based on the current value of working_lang, and are handy
+                    in type-checking.
+
+Wed Jun 19 15:39:34 EDT 1991
+
+     eval.c         Added the function type_array_rank which computes the rank
+                    of an array type.
+     valarith.c     Added the funtion value_bool, which when given a integer
+     value.h        value (ie. struct value *) as an argument, it returns a
+                    boolean value (ie.  struct value *) true if that integer
+                    is non-zero, and a boolean value false otherwise.
+     valprint.c     Added cases for TYPE_CODE_BOOL, so Modula-2 BOOLEAN values
+                    will print out properly.
+
+Wed Jun 19 16:36:34 EDT 1991
+
+     valops.c       Added the function value_capitalize, which returns it
+     value.h        argument capitalized if its argument is a lowercase
+                    letter, or the argument unchanged if its argument is not a
+                    letter.
+     valarith.c     Added the function range_check_p, which returns non-zero
+     value.h        if its value argument is between the integral bounds upper
+                    and lower.
+                    Added the function range_check_enum_p, which makes sure
+                    that its value argument is a valid member of the domain of
+                    its type argument.
+                    Added the function range_check_range_p, which makes sure
+                    its value argument lies between the upper and lower bounds
+                    of its type argument, which must be a ranged type.
+                    Added the function check_array_index, which range and type
+                    checks an index of an array.
+                    Added the function value_multi_subscript, which computes
+                    array[idx1,idx2...idxN], given a value array and an array
+                    of values representing indicies.
+     values.c       Changed value_from_long to work with TYPE_CODE_CHAR and
+                    unpack_long to work with TYPE_CODE_BOOL and
+                    TYPE_CODE_CHAR.
+
+Wed Jun 19 18:04:08 EDT 1991
+
+     symtab.c       Stored pervasive types in a structure and make
+                    lookup_pervasive_type() a lookup function that was based
+                    on working_lang.  If lookup_pervasive_type() returned
+                    non-zero, then that value was returned (a fix, since
+                    before it simply wouldn't return the pervasive type.)
+     language.h     Added the macro CAST_IS_CONVERSION, which evaluates to
+                    non-zero if the language specified by working_lang means
+                    "conversion" when it says "cast".
+     valops.c       Added the function value_real_cast(), which performs a
+     value.h        *cast*, not a *conversion*, which is what value_cast()
+                    does when it can.  In particular,
+                    value_cast(<float_type>,4) = 4.0, while
+                    value_real_cast(<float_type>,4) = some mess.
+     eval.c         Modula-2 builtin functions implemented:  ABS, CAP, CHR,
+     parser-code.c  FLOAT, HIGH, MAX, MIN, ODD, ORD, TRUNC, and VAL.  
+     expression.h   Added macros MAX_OF_TYPE and MIN_OF_TYPE to work with MAX
+                    and MIN on integral types.  *NOTE*: These are currently
+                    hardcoded to work only if there are 8 bits per storage
+                    unit.  FIXME.
+     eval.c         Made logical functions call value_bool to return a
+                    properly typed boolean value, based on working_lang.
+
+Thu Jun 20 11:55:27 EDT 1991
+
+     valprint.c     Types now print out in a Modula-2 fashion.  This works for
+                    the cases when the type is printed out step-by-step, that
+                    is, it doesn't work when the name of a structured type
+                    (which includes the keyword "struct", etc.)  is simply
+                    displayed.
+                    FIXME:  Perhaps this is bad.  Parts of it seem to kludgey,
+                    since type specifications in C and Modula-2 are very
+                    different.  The C printing of a type is very recursive,
+                    whereas in Modula-2 it is generally very simple.  C has
+                    type prefixes and suffixes, which have no real analogue in
+                    Modula-2.  Maybe type_print() should call a language
+                    specific type printer.  This is also advantageous if we
+                    compile GDB to exclude some of the languages.  We'll just
+                    leave those functions out.
+
+Thu Jun 20 16:57:10 EDT 1991
+
+     dbxread.c      When reading the complete symbol table in (via
+                    psymtab_to_symtab()), the number and types of function
+                    arguments are added to a function type.  define_symbol()
+                    calls add_param_to_type() to accomplish this.
+                    Assumption:  when we come across a function definition
+                    (N_FUN symbol with an 'f' or 'F' in the name), its
+                    arguments will appear before another function definition.
+                    When a function is found, a pointer to its type is placed
+                    in the global in_function_type.  Changes that
+                    add_param_to_type() makes are to this global.
+     valprint.c     The type of a function now includes (for Modula-2) the
+                    types of its parameters.
+     eval.c         Type checking and a check for the proper number of
+                    arguments is now done for function calls.  Not sure of the
+                    impact this has on C++ member function yet.
+
+Thu Jun 20 19:58:48 EDT 1991
+
+     valprint.c     Rewrote the type printer.  Broke it into two language
+                    specific parts, adding the functions type_print_m2() and
+                    type_print_m2_1().
+                    An unfortunate consequence is this:  if you debugging a C
+                    program in Modula-2 mode (why?), info types does not work
+                    well with regular expressions, since the types are printed
+                    out in Modula-2 terminology, but stored in C terminology.
+     language.[ch]  Added the functions new_type_last(), type_keyword(), and
+                    type_sep() to aid in the printing of typedefs.
+     symtab.c       Made the printing of typedefs as language independent as
+                    possible through calls to new_type_last(), type_keyword(),
+                    and type_sep().
+
+Fri Jun 21 11:50:26 EDT 1991
+
+     dbxread.c      Check all incoming ennumerated types.  If it looks like
+                    Modula-2's BOOLEAN type, then change the type_code of the
+                    type to TYPE_CODE_BOOL so we can process it as a boolean
+                    variable.
+     valprint.c     Replaced some of the 0x%x with calls to sprintf and
+                    hexformat() in val_print().
+     language.[ch]  Added the function hex_to_string(), which converts its
+                    integral argument to a hexadecimal number (format is
+                    language based) and returns the result as a string.
+
+Mon Jun 24 12:25:07 EDT 1991
+
+     valprint.c     Some functions call type_print_1() directly, instead of
+     value.h        using type_print(), so they can specify where (column) to
+                    print things.  Since type_print() takes care of language
+                    dependence, that needs to be called first.  Added a
+                    parameter depth to type_print() (so it is now like
+                    type_print_1).  Changed type_print to type_print_at, and
+                    made type_print a macro that passes a depth argument of
+                    zero.
+     symmisc.c      Changed all calls to type_print_1 to calls to
+                    type_print_at.
+     Makefile.dist  Made it possible to build GDB for a specific set of
+     depend         languages.  Do this by passing a definition for the macro
+                    LANGS to make.  LANGS should be a string containing a
+                    space-separated list of language names (ie. LANGS="c m2").
+                    The default is to build all languages.  Note that grammar
+                    files must follow the naming convention of <lang>-exp.y.
+     gdb.lang       This holds the current value of the LANGS macro.  It is
+                    examined every time make is called, and is updated if
+                    necessary.
+     eval.c         Added #ifdef _LANG_<lang> to these files.
+     expread.c      Still need to add them to dbxread.c and coffread.c.
+     main.c
+     source.c
+     symtab.c
+     utils.c
+     valarith.c
+     valprint.c
+
+Mon Jun 24 16:33:11 EDT 1991
+
+     language.[ch]  Added the functions hexformat_pre() and
+                    hex_to_string_pre(), which take a prefix argument to
+                    include in the format string.  Thus, hexformat_pre("08") will
+                    return "0x08x" (if the working language is language_c). 
+                    Made hexformat() and hex_to_string() calls to the above
+                    with "" as the prefix argument.
+
+     am29k-pinsn.c, arm-pinsn.c, breakpoint.c, convex-tdep.c, exec.c, core.c,
+     dbxread.c, i386-pinsn.c, i386-stub.c, i386-xdep.c, i960-pinsn.c,
+     infcmd.c, inflow.c, m68k-pinsn.c, m68k-stub.c, m88k-pinsn.c,
+     mips-pinsn.c, mips-tdep.c, ns32k-pinsn.c, printcmd.c, pyr-pinsn.c,
+     pyr-tdep.c, pyr-xdep.c, remote-vx.c, remote.c, solib.c, source.c,
+     stack.c, sun386-xdep.c, symfile.c, symm-xdep.c, symmisc.c, tahoe-pinsn.c,
+     valprint.c, vax-pinsn.c
+
+          Changed all occurences of 0x%[0-9]*l*x in printf format strings to
+          calls to hexformat() and hex_to_string().  Format strings without
+          the leading "0x" were ignored.
+
+     depend         Updated to take the above into account.
+
+
+Tue Jun 25 15:27:18 EDT 1991
+
+     symtab.h       Added the types range_mode_t, range_check_t, type_mode_t,
+                    and type_check_t to keep track of the current state of
+                    range and type checking.
+     main.c         Added the variables range_mode, range_check, type_mode,
+                    and type_check to record the current state of range and
+                    type checking.  Added initialization code to main().
+     language.h     Changed the macros STRICT_TYPE and RANGE_CHECK to examine
+                    the above variables.
+
+
+Tue Jun 25 17:57:08 EDT 1991
+
+     dbxread.c      process_one_symbol() updates the variable (enum language)
+                    source_lang based on the extension of the filename
+                    contained in the N_SO sybmol that started this symtab.
+                    When end_symtab() is called, the value of source_lang is
+                    put into the language field.
+     stack.c        select_frame() sets working_lang (and possibly type_check
+                    and range_check) to the language field of the symtab
+                    associated with the frame that is selected if working_mode
+                    is language_auto.  If working_mode is language_manual, a
+                    warning is printed and working_lang is not set.
+     language.c     Added the function set_type_range(), which sets the value of
+                    type_check and range_check (if their modes call for
+                    automatic setting) based on the current value of
+                    working_lang.  A non-zero argument will cause the current
+                    settings to be output.
+
+
+Wed Jun 26 14:51:40 EDT 1991
+
+     eval.c         Added range checks on assignment.
+     m2-exp.y       Added the grammar for sets to the language.  Currently,
+                    these do not do anything except print an error message.
+
+Wed Jun 26 17:01:04 EDT 1991
+
+     m2-exp.y       Added the ability for parse_number() to parse negative
+                    numbers.  A global flag is set upon encountering a unary
+                    minus.  This was done to make, for example, 1 parse as a
+                    CARDINAL, and not as an integer, per Wirth's examples in
+                    Programming in Modula-2 ed.4.
+     valprint.c     Added support for "set radix 2" by then setting
+                    output_format to 't'.
+     eval.c         Implemented range checking on subrange types.  Added calls
+                    to range_check_range_p for BINOP_ASSIGN and BINOP_VAL.
+                    Implemented MIN and MAX for ennumerated types.  The
+                    minimum value of an ennumerated type is defined by Wirth
+                    as the first identifier, and the maximum as the last.
+     m2-exp.y       Made octal numbers ending with "B" be characters and those
+                    ending with "C" be numbers, per Wirth's book. (p. 34)
+          
+Thu Jun 27 14:11:52 EDT 1991
+
+     stack.c        select_frame() now only sets working_lang, it does not
+                    notify the user.  If working_mode is language_manual, then
+                    a warning is issued once.
+     main.c         At the end of each call to execute_command(), working_lang
+                    is checked against the local static (enum language)
+                    current.  If they differ and working_mode is
+                    language_auto, the new settings of language, type and
+                    range checking are printed out.
+     stack.c        Modified frame_info() to include the language of the
+                    current frame in the output of "info frame".
+     language.[ch]  Added the function language_str() which returns the name
+                    of the current language.
+
+Fri Jun 28 15:33:14 EDT 1991
+
+     m2-exp.y       Added the built-in procedures INC, INCL, DEC, and DECL to
+                    the language.  INCL and DECL currently cause an error,
+                    since sets are not implemented yet.  INC and DEC are
+                    implemented as PREINCREMENT/PREDECREMENT with one
+                    argument, and as ASSIGN_MODIFY with two arguments.
+     eval.c         Added type checking to the above cases.
+     value.h        Added not_lval_constant to the lval_type ennumerated type.
+                    not_lval_constant means that the value is a constant
+                    value; that is 3 or 'a' or TRUE, not as in a constant
+                    identifier.  This is used to help coerce numbers such as 3
+                    to either signed or unsigned numbers.
+     valops.c       Added the function value_coerce_constants() which coerces
+                    constant integers as following:  if one is a constant and
+                    the other is not, the constant's type is set to the type
+                    of the other argument.  If both are constants and one is
+                    signed, the other is converted to a signed constant.
+
+Sat Jun 29 17:26:29 EDT 1991
+
+     valarith.c     Added a better range checker.  It now checks range
+                    (successfully) on integral operations [+-] (signed and
+                    unsigned) for any C sized type.  Still does not work well
+                    for multiplication.)
+                    int_in_size() returns an integer that is coerced to fit into
+                    specified number of bytes.
+
+Mon Jul  1 13:04:14 EDT 1991
+
+     language.[ch]  Added the function binop_result_type(), which returns the
+                    builtin (struct type *) type that would be the result of a
+                    binop on the two values V1 and V2.
+
+Wed Jul  3 19:22:53 EDT 1991
+
+     source.c       Extended source_info() to include the source language in
+                    the output from "info source".
+     
+Fri Jul  5 13:48:52 EDT 1991
+
+     utils.c        Moved the support functions for the GDB set/show commands
+                    dealing with language into language.c.
+     language.c     Added the function language_info(), which displays info
+                    about the current working language, type and range check
+                    settings.  Called via the GDB command "info language".
+                    Added an initialization routine _initialize_language(),
+                    that sets defaults for the language, type and range
+                    variables and sets up the new GDB commands.
+     main.c         Language setup moved to language.c.
+     depend         Rebuilt.
+
+Mon Jul  8 10:10:22 EDT 1991
+
+     valarith.c     Debugged the range checker for arithmetic.  Still does not
+                    work for multiplication very well.
+
+Mon Jul  8 12:40:37 EDT 1991
+
+     language.[ch]  Added the function value_true() which returns non-zero if
+                    its argument represents a boolean true value.
+     breakpoint.c   Changed breakpoint_cond_eval() to call value_true() to
+                    check the truth of an expression.
+
+Thu Jul 11 12:51:34 EDT 1991
+
+     language.[ch]  Added the predicate structured_type(), which returns
+                    non-zero if the argument is a structured type.
+                    Added the predicate pointer_type(), which returns non-zero
+                    if the argument is a pointer type.
+     eval.c         Added the ability to do addition and substraction on
+                    pointers and integers.   This case simply bypasses the
+                    type checker.
+
+Thu Jul 11 14:41:42 EDT 1991
+
+     include/stab.def
+                    Added the symbol N_DEFD (0x4a) which is a definition
+                    module dependency that is used by the GNU Modula-2
+                    compiler and the linker.  It is not important to GDB,
+                    except that [dbx|coff|mips]read.c should ignore these
+                    symbols.
+
+Fri Jul 12 16:07:00 EDT 1991
+
+     valprint.c     Changed the TYPE_LENGTH(type) >= 0 to TYPE_LENGTH(type) >
+                    0 in val_print().  Also added statements to the else part
+                    to coerce type (argument to val_print) to a pointer type
+                    if it is an "array of unspecified length".
+     valops.c       Added the function value_m2_string(), which returns a
+                    (value) value which is a constant string, whose type is
+                    (ARRAY [0..n] OF CHAR).  The length field of the type
+                    structure is set to zero, so it will be interpreted as an
+                    "array of unspecified length".
+     stack.c        Moved the language/frame mismatch check to
+                    main.c:execute_command().
+     main.c         The working language is recorded each time
+                    execute_command() is executed.  If working lang has
+                    changed during its execution, then the new
+                    language/type/range info is printed out for the user.  If
+                    the working language does not match the language of the
+                    frame, a warning is issued.
+
+Sat Jul 13 16:16:39 EDT 1991
+
+     eval.c         Moved all the type-checking stuff for operators to
+     language.[ch]  language.c.  This is so we can keep language-specific
+                    stuff (like for what type operators are defined) in
+                    language.c.
+     language.[ch]  Added the function binop_type_check(), which checks to see
+                    if its two (value) arguments are type-compatible with its
+                    opcode argument.  The opcode should represent an operation
+                    involving an operator.  Also added the macro function
+                    unop_type_check, which calls binop_type_check with a
+                    NULL second argument.
+     expprint.c     Added Modula-2 operators to the op_print_tab, so info
+     expression.h   break works correctly.  Also added "op_string", which
+                    returns the string corresponding to the (enum exp_opcode)
+                    opcode that is its argument.
+
+
+Sat Jul 13 18:26:18 EDT 1991
+
+     coffread.c     Added code to record the type of function arguments with
+                    each paricular function.  Code is very similar to that
+                    added to dbxread.c.  
+     dbxread.c      Moved add_param_to_type() to symtab.c
+     symtab.[ch]    Added function add_param_to_type() from dbxread.c
+
+     *** NOTE:  The above additions have not been tested.
+
+Mon Jul 15 12:50:47 EDT 1991
+
+     langauge.[ch]  Added the functions type_error and range_error, which work
+                    like error() except if the type/range mode is set to
+                    *_mode_warn, then they do not do a return_to_top_level(),
+                    but merely print a warning.
+                    Also changed [set|show]_[type|range]_command() to support
+                    the new "warn" feature.
+
+Thu Jul 18 17:50:54 EDT 1991
+
+     mipsread.c     Added code to record the type of function arguments with
+                    each particular function.  Code is very similar to that
+                    added to dbxread.c.  
+
+     *** NOTE:  The above additions have not been tested.
+
+Fri Jul 19 11:19:10 EDT 1991
+
+     defs.h         Added macros MAX_OF_SIZE, MIN_OF_SIZE, UMAX_OF_SIZE, and
+                    UMIN_OF_SIZE, which when given a size of a numeric type,
+                    return the maximum and minimum value it can hold.  UMAX...
+                    and UMIN... return the result for unsigned types.
+     symtab.h       Added the macros MAX_OF_TYPE and MIN_OF_TYPE to operate on
+                    struct types.  They call above macros.
+     dbxread.c      Renamed the MAX and MIN_OF_TYPE macros to ..._OF_CTYPE to
+                    avoid a name conlict with the above.
+     c-exp.y        Added range checking on numeric constants in
+                    parse_number() for completeness.
+     valarith.c     Made binop_user_defined_p() and unop_user_defined_p()
+                    return 0 if working_lang is not language_c.
+
+Thu Aug  8 14:17:22 EDT 1991
+
+	main.c
+	printcmd.c
+	breakpoint.c	Documentation strings of some commands changed to
+				eliminate the references to the C language where
+				appropriate.
+
+Tue Aug 13 15:48:03 EDT 1991
+
+	m2-exp.y		Added qualified identifiers to the grammar.  The semantics
+				are slightly different from those of the GDB operator ::
+	c-exp.y
+	m2-exp.y		Added a rule to each grammar of the form:  start ::= exp |
+				type_exp, where type_exp is any valid type expression.
+	expression.h	
+	eval.c		Added the opcode OP_TYPE, and an error case in eval.c.
+	printcmd.c	Modified ptype_command() so it actually parses the input
+				(necessary for type expressions with scope qualifiers).
+				Added the function ptype_eval() which expects an
+				expression composed of one OP_TYPE element.
+	*.[ch]		Replaced all occurences of parse_c_expression with
+				parse_expression
+	*.[ch]		Replaced all occurences of parse_c_1 with parse_exp_1
+
+[End of ChangeLog entries from Andrew Beers for Modula-2 support.]
+
+Mon Sep 16 17:19:46 1991  John Gilmore  (gnu at cygnus.com)
+
+	Small fixes from Peter Schauer:
+
+	* infrun.c (child_attach):  Lint.
+	* solib.c (find_solib):  Handle shared libs version 2.
+
+	Small fixes from David Wood:
+
+	* xm-ultra3.h (SYS_SIGLIST_MISSING):  Typo.
+
+	Small fixes:
+
+	* remote-vx.c:  Move <stdio.h> to top, for FILE.  Fix from
+	John S <basrai%kanga.dnet@c3po.sm-alc.af.mil>.
+
+	* utils.c (wrap_here):  Avoid wrap action of fputs_filtered if
+	chars_per_line is at maximum (user typed `set width 0').  Fix
+	from Andreas Schwab <schwab@ls5.informatik.uni-dortmund.de>.
+
+Tue Sep 17 17:31:04 1991  Stu Grossman  (grossman at cygnus.com)
+
+	* coredep.c:  include ptrace.h where necessary.
+	* mipsread.c(parse_lines):  fix unsigned char problem that was
+	messing up line numbers on SGI's and possibly other MIPS based
+	platforms.
+	* infrun.c (child_create_inferior):  use better test to check
+	return val from setpgrp().
+	* tm-irix3.h, xm-irix3.h, tconfig/irix3, xconfig/irix3:  add these
+	for sgi/irix support.
+
+Wed Sep 18 04:33:31 1991  Per Bothner  (bothner at cygnus.com)
+
+	* mipsread.c (parse_symbol):  Put non-static procedures
+	in the global block.
+
+Fri Sep 13 00:14:52 1991  John Gilmore  (gnu at cygnus.com)
+
+	Patch together `text_start' and `text_end' for 29K port.
+
+	* exec.c (exec_command):  If NEED_TEXT_START_END, define the
+	variables and set them based on the exec file.
+	* am29k-tdep.c:  declare text_start.
+	* valops.c (call_function_by_hand):  declare text_end.
+
+	* inferior.h:  Eliminate CANNOT_EXECUTE_STACK in favor of
+	defining CALL_DUMMY_LOCATION as BEFORE_TEXT_END.  This is
+	because machines that do this will also have to know to
+	set NEED_TEXT_START_END.  Besides, it was a redundant way to
+	say the same thing.
+	* tm-29k.h, tm-convex.h, tm-np1.h:  Eliminate
+	CANNOT_EXECUTE_STACK, define CALL_DUMMY_LOCATION and
+	NEED_TEXT_START_END.
+
+Thu Sep 12 00:22:24 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	AMD 29000 changes from David Wood <wood@david.ultra.nyu.edu>:
+
+	* Makefile.in (CLIBS):  Put XM_CLIBS and TM_CLIBS at end.
+	Pass MUNCH_DEFINE to munch whenever we run it.
+	* am29k-pinsn.c (print_insn):  Handle NOP specially.  Avoid %#x
+	format string; use 0x%x instead.
+	* am29k-tdep.c:  Use DUMMY_SAVE_GREGS and RETURN_REGNUM.
+	* ultra-xdep.c, xm-ultra.h:  New files for Ultracomputer host system.
+	* xm-rtbsd.h:  New host support for RT/PC running BSD Unix.
+	* inflow.c:  Handle `short' process group IDs.
+	* infptrace.c (fetch_register):  Support CANNOT_FETCH_REGISTER,
+	and check for ptrace errors.
+	* coffread.c (SDB_REG_TO_REGNUM):  Define if not already.
+	(coff_symfile_init):  Initialize text_bfd_scnum.
+	(read_coff_symtab):  Use it to find the text [and absolute?] sections.
+	* ../config.sub:  Add vendor nyu and os "sym[1-9]*".
+	* configure.in: Add hosts rtpc-*-* and a29k-*-*.
+	Merge target arm case with other "easy" cases.  Add target
+	cases a29k-*-none (rehack of am29k), a29k-*-kern (remote to
+	Ultracomputer kernel), and a29k-*-sym1 (ultracomputer OS's user
+	process).
+	* minimon.h, remote-adapt.c, remote-mm.c:  Add.
+	* munch:  Cope with RT/PC putting fns in data segment.
+	Restore ability to override `nm' by specifying MUNCH_NM.
+	* xconfig/rtbsd, xconfig/ultra3:  New host systems.
+	* tconfig/a29k:  Rename from tconfig/am29k.  Add remote-mm
+	and remote-adapt.  Remove encapsulated coff #define's (the
+	support should go in BFD, and gdb shouldn't know or care).
+	* tconfig/a29k-kern:  Same, but for remote kernel debugging.
+	* tconfig/ultra3:  For debugging user processes on Ultra3/Sym1.
+	* tm-29k.h:  Update BADMAG (though it should go away).
+	Allow the register definitions to be overridden in another
+	tm-file.  Fix SR_REGNUM.  Add a mess of _REGNUM's.  Separate
+	RETURN_REGNUM from GR96_REGNUM and DUMMY_SAVE_GREGS from
+	DUMMY_SAVE_GR96, for handling kernel calling conventions
+	that use GR64+ rather than GR96+.
+	* tm-ultra3.h:  New file, for use on Ultra3 Unix as well as for
+	remote debugging of Ultra3 kernel.  Includes tm-29k.h and
+	overrides various things.
+
+	* remote-mm.c (mm_attach, mm_wait):  Handle attach like
+	child_attach does, making a clean stop in the newly attached
+	program.
+	* remote-eb.c:  Lint.
+
+	* coffread.c:  Make coffread independent of any particular
+	variant of COFF.  Avoid #include-ing any particular one except
+	internalcoff.h.  BFD now passes key values for symbol reading
+	as part of its coff_data structure (LINESZ, SYMESZ, AUXESZ,
+	and the symbol masks and shifts); use them.
+	Remove obsolete end_of_text_addr.
+
+	* exec.c:  Remove unused include files.
+
+Wed Sep 11 19:38:44 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* Makefile.in (documentation targets):  Pass $(M4).
+	Bugfix from eggert@twinsun.com (Paul Eggert).
+
+	* stack.c (down_silently_command):  Check for stack existence.
+
+Tue Sep 10 23:08:29 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* Makefile.in (VERSION):  Update to 4.0.3.
+
+Tue Sep 10 09:19:29 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* core.c (core_file_command):  Print frame at coredump with
+	its level number, by calling print_stack_frame.
+	* frame.h:  Add selected_frame_level, print_stack_frame.
+	* frame.h, stack.c:  Remove print_sel_frame, print_selected_frame.
+	* convex-tdep.c, convex-xdep.c, infcmd.c, inflow.c, infrun.c:
+	Change print_sel_frame and print_selected_frame callers to
+	print_stack_frame.
+
+	* dbxread.c (read_ofile_symtab):  Avoid empty else clause.
+	* symfile.c (free_named_symtabs):  Ditto.
+	* main.c (main):  wrap_here needs an arg.
+	* solib.c (find_solib):  Avoid memory access if _DYNAMIC is zero.
+	(solib_add):  Avoid noise.  
+	(solib_create_inferior_hook):  Lint.
+	(sharedlibrary_command):  Move dont_repeat to here.
+	* utils.c (error):  Call wrap_here to force buffered output.
+
+	Small patches from Peter Schauer:
+
+	* coffread.c (start_symtab):  Free any existing line_vector before
+	malloc-ing new one.
+	(read_coff_symtab):  Ditto for type_vector.
+
+	* source.c (lines_to_list):  New variable, replacing function.
+	(all uses):  Use as variable.
+	(_initialize_source):  Add 'set listsize' and 'show listsize'.
+	* utils.c (lines_to_list):  Remove function.
+	* stack.c (print_frame_info):  Use as variable.
+	* defs.h (lines_to_list):  Remove declaration.
+
+Mon Sep  9 13:45:57 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* breakpoint.c (insert_breakpoints):  Restore warning about
+	the program might be running in another process, but only for
+	systems with this brain death (#ifdef ONE_PROCESS_WRITETEXT).
+	* xm-hp300bsd.h, xm-mips.h, xm-vax.h:  Define it.
+
+	* utils.c (error):  if error_pre_print is set, print the string
+	first.
+	* main.c (main, print_gnu_advertisement, print_gdb_version):
+	Reformat legalese so it always prints, but acts as an "I'm here"
+	message while symbols are being read.  If any errors occur,
+	print a few newlines to set off the message and start it at the
+	left margin.  Remove mention of "help" command, and don't yak
+	about symbol reading.
+	(catch_errors):  Error string is now printed first in case of
+	error, not last.
+	* command.c (undef_cmd_error, lookup_cmd):  On undefined command,
+	suggest the "help" command.
+
+	* Makefile.in (VERSION):  Set to 4.0.2.
+
+Thu Sep  5 23:49:48 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* .gdbinit:  Remove useless "rr" command.  Set complaints
+	to 1 for people debugging gdb.
+
+	* breakpoint.c, remote-vx.c:  Reword strings printed by
+	catch_errors callers.
+
+Wed Sep  4 11:07:50 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* WHATS.NEW:  "history write -> history save".  Doc "write on/off".
+	(Fix from kenc@viewlogic.com.)
+
+	Fix some infrastructure to be able to cope with host and target
+	machines with different sized basic types (ints, ptrs, etc).
+	(Idea from pierre@la.tce.com (Pierre Willard).)
+
+	* values.c (value_from_longest):  Rename from value_from_long.
+	Handle pointer types as well as integers, so that targets with
+	different pointer sizes from the host can be accomodated.
+	* breakpoint.c, convex-tdep.c, eval.c, expprint.c, printcmd.c,
+	valarith.c, valops.c, valprint.c, value.h, values.c:  Rename
+	uses of value_from_long to value_from_longest.
+	* eval.c, findvar.c, printcmd.c, valarith.c, valops.c:  Pass
+	the correct pointer type to value_from_long{est}.
+
+	* doc/gdb.texinfo ($_, $__):  Describe types of these variables.
+
+	* remote-vx.c:  Remove obsolete code for calling functions via
+	vxworks kludge interface (it referenced value_from_long).
+
+	* valops.c (value_string):  Find malloc with lookup_misc_func, not
+	raw search.
+
+Tue Sep  3 18:37:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Make writing to files work properly.  (Fixes to BFD are also needed.)
+
+	* core.c (core_open):  Open file ourselves, read or r/w, depending on
+	write_files.  Use bfd_fdopenr.  
+	* gdbcore.h (write_files):  New variable.
+	* exec.c (write_files):  Define variable, add set&show for it.
+	(exec_file_command):  Use write_files to open for read or r/write.
+
+	Make shared library reading happen automatically.  These changes
+	are mostly from Peter Schauer <pes@regent.e-technik.tu-muenchen.de>.
+
+	* inferior.h (stop_soon_quietly):  Add to exported variables.
+	* infrun.c (child_create_inferior):  call solib hook, if defined.
+	(child_attach):  call solib hook, if defined.
+	* solib.c:  Include inferior.h.  Add from_tty to so_list as kludge.
+	(find_solib):  Use lookup_misc_func rather than hand-rolled.
+	(symbol_add_stub):  New stub for catch_errors.
+	(solib_add):  Avoid output if !from_tty.  Catch errors rather
+	than just calling symbol_file_add and bombing.
+	(solib_create_inferior_hook):  Interface with the target process
+	to let it read and alloc shared libs, then figure out what it did.
+
+	* core.c (validate_files):  Fix typo, soften warning.  
+	(Fix from Hiroto Kagotani <kagotani@cs.titech.ac.jp>.)
+
+	* utils.c (fputs_demangled):  Avoid duplicate printing if
+	demangling is off.  (Fix from J.T. Conklin <jtc@cayenne.com>.)
+
+	* infrun.c (proceed):  Cast -1 to (CORE_ADDR) before comparing.
+	(Fix from pierre@la.tce.com (Pierre Willard).)
+
+	* main.c (catch_errors):  Change argument to a char * from an int,
+	since a char * can point to a struct full of glop, but an int
+	is not guaranteed to be able to hold a pointer.
+	* breakpoint.c (breakpoint_cond_eval, bpstat_stop_status,
+	breakpoint_re_set_one, breakpoint_re_set):  Adapt.
+	* core.c (core_open, solib_add_stub):  Adapt.
+	* remote-vx.c (symbol_stub, add_symbol_stub, callers):  Adapt.
+
+Wed Aug 28 18:18:05 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* Makefile.in:  Update VERSION to 4.0.1.  Evade GNU Make bug
+	by adding .NOEXPORT target.
+
+Fri Aug 23 17:14:25 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* GDB-4.0 release!
+	* Update README.
+	* Makefile.in (VERSION):  Roll to 4.0.
+	(gdb.tar.Z):  Make refcard.ps as well, for shipment.
+
+Fri Aug 23 14:07:09 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/gdb.texinfo: minor rewordings, crossref to ptype from print,
+	more on printsyms. 
+
+	* doc/Makefile, Makefile.in: generate "gdb-all.texi" rather than
+	"gdb-all.texinfo" 
+
+	* doc/rdl-apps.texi: renamed from rdl-apps.texinfo
+
+	* Makefile.in, doc/Makefile, doc/gdb.texinfo:
+	reflect above name change
+
+	* WHATS.NEW: correct pointer to refcard.
+
+	* doc/gdb.texinfo: update New Features, Installing
+
+	* doc/gdbint.texinfo: add short description of configure +template
+
+Fri Aug 23 11:46:08 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/gdb.texinfo: update, fix bugs in "Installing" appendix
+
+Fri Aug 23 01:02:00 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* Makefile.in:  Add config.sub, make doc/rdl-apps.texinfo for
+	tar file, add dependencies for referenced doc files.
+
+Thu Aug 22 22:17:06 1991  Stu Grossman  (grossman at cygint.cygnus.com)
+
+	* coffread.c, symfile.c, stack.c:  saberized.
+
+Thu Aug 22 16:20:27 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/refcard.tex: permuted Essential Commands sec
+
+	* doc/gdb.texinfo: new C++ chapter; revised installation appendix;
+	new doc for
+		set/show symbol-reloading
+		default set complaints 0
+		info all-registers
+		RET-repeat disabled after prompted long displays
+		processID (attach) interpretation of 2nd GDB cmdline arg
+
+Thu Aug 22 14:05:47 1991  Stu Grossman  (grossman at cygint.cygnus.com)
+
+	* expread.y, coffread.c, dbxread.c, target.c, mem-break.c,
+	  cplus-dem.c, values.c, valprint.c, symfile.c, remote.c,
+	  breakpoint.c, main.c:  lint.
+
+Thu Aug 22 02:02:26 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Install new configuration scheme for GDB and friends.
+
+	* config.sub:  Translate ordinary names to three-part names.
+	* configure:  Use three-part names internally.
+	* configure.in:  Translate three-part names to filenames.
+
+	* README, WHATS.NEW:  Update for gdb-4.0.
+	* Makefile.in:  Roll VERSION to 3.99.
+
+Wed Aug 21 18:21:09 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* infptrace.c (KERNEL_U_ADDR_BSD):  Include a.out.gnu.h.
+	* i960-tdep.c, m68k-tdep.c, sparc-tdep.c, tm-i960.h,
+	tm-m68k.h, remote-nindy.c:  Change ext_format_XXX structs
+	to single structures rather than arrays; when passing
+	their address, use &.  This avoids trouble with bdead compilers.
+	* mcheck.c: Don't include <stdlib.h>; just declare "void abort();"
+	instead.  This avoids portability headaches.
+	* mips-tdep.c (mips_do_registers_info):  Only print FP regs if
+	asked to.
+	* source.c (open_source_file):  Avoid ANSI const bdeath by 
+	skipping declaration and then casting result value.
+	* tm-hp300bsd.h:  Clarify comment.
+	* utils.c (strstr):  Result is const char *; ANSI bdeath.
+	* xm-hp300bsd.h:  Define HOST_BYTE_ORDER.  Redefine INT_MIN,
+	since system include file defines it differently from "defs.h",
+	though the two are equivalent for our purposes.
+	* tconfig/hp300bsd:  Add m68k-tdep.o.
+
+Tue Aug 20 16:01:11 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* tconfig/sun*4:  Remove warnings about system assembler.
+
+Mon Aug 19 13:44:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* mcheck.c:  Avoid warning about undeclared abort fn.
+	* tm-sparc.h (PC_ADJUST):  Avoid calling error() from this;
+	it causes recursive calls to error() when used in cleanups.
+	To do so requires that we make it a function, so we do.
+	* sparc-tdep.c (sparc_pc_adjust):  New implem of PC_ADJUST.
+	* utils.c (do_cleanups):  Remove the current cleanup from the
+	chain *before* calling it, in case error() is called from it.
+	The result won't be pretty, but won't be an infinite loop either.
+
+Mon Aug 19 00:41:04 1991  Michael Tiemann  (tiemann at cygint.cygnus.com)
+
+	* dbxread.c (read_struct_type): Grok anon structs for C++.
+	(vb_name, vptr_name): Null terminate these strings.
+
+Fri Aug 16 08:31:03 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Minor bug fixes from BSD Net2 gdb:
+
+	* blockframe.c (get_prev_frame_info):  If FRAME_CHAIN_COMBINE
+	returns 0, there is no previous frame.
+	* breakpoint.c (commands_command):  If !from_tty, don't call
+	input_from_terminal_p().
+	* dbxread.c (record_misc_function):  Speed up slightly.
+	(compare_psymbols):  Ditto.
+	* infcmd.c (do_registers_info):  Take a second argument to
+	determine whether to print float registers.  "info registers"
+	does not do so anymore.  "info all-registers" does, now.
+	* mips-tdep.c, pyr-tdep.c (xxx_do_registers_info):  Take second
+	arg and ignore it.
+	* tm-mips.h, tm-pyr.h (DO_REGISTERS_INFO):  Pass second arg.
+	* inflow.c (initialize_inflow):  Set tflags_ours correctly.
+	
+	Other fixes:
+
+	* breakpoint.c (bpstat_do_actions):  Use a cleanup to restore
+	executing_breakpoint_commands if we are interrupted by error.
+	* coffread.c (init_lineno):  Avoid problem with zero-sized linetab
+	versus malloc/free.  From: john@labtam.labtam.oz.au (John Carey).
+	* core.c (solib_add_stub, core_open):  Call SOLIB_ADD inside a
+	catch_errors() so we can setup the frame regardless of whether
+	the shared libs work.
+	* ieee-float.c (double_to_ieee_extended):  Get exponent from
+	right place in little-endian systems.  From John Carey.
+
+Thu Aug 15 18:43:57 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* main.c: Remove unused terminating_signals and catch_termination().
+	(long_options):  Terminate with a zero element.
+	[Bugfix from Atsuo Kawaguchi <atsuo@hark86.harl.hitachi.co.jp>.]
+	(gdb_readline):  Make call-compatible with readline.
+	(init_signals):  Improve comments re vfork vs. signal.
+
+	* utils.c (prompt_for_continue):  Use new gdb_readline().
+	If we prompt for continuation, we don't let CR repeat the previous
+	command, once we get back to a prompt.  It's too easy to keep
+	hitting CR, expecting "--more--" prompts, and have some long
+	command start repeating on you.
+
+Tue Aug 13 16:17:56 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* blockframe.c (frameless_look_for_prologue):  Speed up by
+	calling SKIP_PROLOGUE_FRAMELESS_P if it's defined.
+	* tm-sparc.h (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
+	Define two variants, one faster.
+	* sparc-tdep.c (sparc_frame_chain):  Use target_read_memory
+	and return zero, rather than giving an error.
+	(setup_arbitrary_frame):  Initialize the PC in the new frame.
+	(skip_prologue):  Add a second arg saying whether we're just
+	checking for a frameless function or not.
+
+	* core.c (core_open, core_close, core_xfer_memory):  Move
+	section table pointers and bfd* into the target_ops.
+	(core_open):  Allow errors in shared lib reading, etc.
+	(core_files_info):  Describe shared library sections.
+
+	* exec.c (exec_open, exec_close, exec_xfer_memory, xfer_memory,
+	exec_files_info, set_section_command):  Move section table
+	pointers and bfd* into the target_ops.
+	(add_to_section_table):  Add BFD to section table.
+
+	* target.c (target_xfer_memory, target_info):  Pass target to
+	xfer_memory and target_info functions.
+	* target.h:   ''
+
+	* gdbcore.h:  Move struct section_table.
+	* target.h:  New home of struct section_table.
+
+	* solib.c (solib_add):  New argument is the target_ops whose
+	section list is to be added to, if any.  Reallocate the
+	sections in that target to add any that come from shared libs.
+	(throughout) so_sections renamed to sections.
+	(solib_xfer_memory):  Deleted.
+	* tm-sunos.h (SOLIB_ADD):  Add target argument.
+	(SOLIB_XFER_MEMORY):  Delete.
+
+	* core.c, exec.c, inftarg.c, remote-eb.c, remote-nindy.c,
+	remote-vx.c, remote.c, target.c, target.h:  Remove add_syms vector
+	from target_ops.  It's the same on all targets.  Add two section
+	pointers to target_ops.
+
+	* stack.c (find_relative_frame):  Dump ancient algorithm for
+	"down", just use handy "next" pointers.
+	(frame_command):  Don't error if there is no stack; let user
+	set one.
+
+	* inflow.c (new_tty_prefork, new_tty):  New prefork routine
+	modifies static state in the parent process; new_tty itself
+	runs in the child and modifies the child's file descriptors
+	to match the saved static state.
+	* infrun.c (child_create_inferior):  Call new_tty_prefork,
+	fork, then new_tty.
+
+	* infptrace.c (child_xfer_memory):  Add ignored target arg.
+	* remote-eb.c (eb_xfer_inferior_memory):  ''
+	* remote-nindy.c (nindy_xfer_inferior_memory):  ''
+	* remote-vx.c (vx_xfer_memory):    ''
+	* remote.c (remote_xfer_memory):   ''.  Rename from
+	remote_xfer_inferior_memory.
+
+	* main.c (main):  Only try to attach "corefile" argument if
+	it starts with a digit.
+
+	* symfile.c (symbol_reloading):  New "set/show" variable.
+	(symbol_file_add):  Shorten message about symbol reading.
+	(add_symbol_file_command):  Merge with add_syms_addr_command,
+	since this should work on all targets now.
+	(stop_whining):  Default to zero, to shut up complaints
+	about bad symbol tables on many systems.
+	(free_named_symtabs):  Just exit unless symbol_reloading.
+
+	* xm-sun3os4.h, xm-sun4os4.h:  Define BROKEN_LARGE_ALLOCA,
+	and add comment explaining shared library screw.
+
+	* source.c:  #if defined => #ifdef.
+
+Thu Aug  8 12:23:19 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* doc/gdbint.texinfo:  Improve doc on porting to new OS's.
+
+Tue Aug  6 17:16:15 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/rdl-apps.texinfo: provide default readline-appendix finder
+	(doc/Makefile knows how to make one for local config)
+
+	* Makefile.in: use doc/Makefile for doc targets
+
+	* doc/Makefile: GDB documentation now has its own Makefile
+	  doc/refcard.tex: renamed from "gdbrc.tex"
+	  doc/gdbint.texinfo: add markup in "Cleanups" chapter
+
+
+Fri Aug  2 00:13:06 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* values.c (baseclass_addr):  When reading target memory, use the
+	length of the basetype, not the upper type.  We've only malloc'd
+	enough space for the basetype, leading to errors in free().
+
+	* expprint.c (print_subexp):  Print UNOP_MEMVAL of an OP_LONG that
+	ends up as a function specially, since we know the actual type of
+	the pointed-to address.  This (somewhat) fixes display of
+	expressions that include misc_function_vector names.  Try `cond 1
+	!strcmp("a","b")' then `i b'.
+
+	* infrun.c:  Move DO_DEFERRED_STORES from proceed() to resume().
+	The child can be proceeded from inside wait_for_inferior in
+	evaluating breakpoint conditions, and DO_DEFERRED_STORES was
+	getting skipped in that case.
+
+	* expprint.c (print_subexp):  Use filtered output, since the
+	subroutines we call use it, otherwise the output is horribly
+	mangled, since output of wrappable stuff comes out late.
+
+	* Makefile.in:  Bump VERSION to 3.98.1
+
+	* infrun.c (child_create_process):  Use execlp to find the
+	shell to exec our target program.  This requires some fiddling
+	with `environ' since there is no execlpe().
+
+Thu Aug  1 15:35:17 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* Makefile.in, doc/gdbrc.tex, doc/rc-* (new files):
+	Minor rearrangement of refcard permits two new make targets--
+	gdbrc.dvi	    DVI output for refcard, using CM fonts
+	gdbrc.ps	    PostScript refcard, using PS fonts
+
+Wed Jul 31 16:46:21 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* GDB-3.98 release.
+
+	* TODO, Projects, WHATS.NEW, README:  Update for gdb-3.98.
+	* Makefile.in (gdb-all.texinfo):  Avoid touching file if M4 dies.
+
+Wed Jul 31 16:35:58 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/gdb.texinfo: last changes for release.
+	Minor typo and formatting fixes; incorporated most fixes remaining from
+	filed mail commenting on earlier drafts.
+
+	Added warnings: pipes don't work in run command;
+	        conditions are converse of assertions;
+	      	step over fn without debug info goes to next fn;
+		vars may have "wrong" values near fn entrance, exit
+
+	Added example from Kingston on printing repeated nonadjacent values
+
+	Added explicit mention that in Emacs gdb mode C-c and C-z are like
+	shell mode for signals
+
+	Renamed "Stepping and Continuing" to "Continuing and Stepping" so it
+	doesn't sound so much like its parent "Stopping and Continuing"; also
+	moved entries on continue to top of section, so they don't get lost.
+
+	Improved installation directions in appendix, added manual formatting
+	instructions 
+
+Tue Jul 30 17:26:39 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* configure.in:  Remove xm.h and tm.h even if we aren't linking
+	new ones, so "./configure sun4; ./configure none" does the right
+	thing.  Assume that alldeps.mak and depend are already built in
+	srcdir, and avoid running "make" (particularly "make depend",
+	which involves "gcc") from inside configure.  Build Makefile
+	directly rather than building Makefile.conf first.
+	* configure:  Regenerate with above changes.
+	* Makefile.in:  Use $(BISON) to find bison.  Roll VERSION
+	to 3.98.  Revise gdb.tar.Z procedure to produce a file
+	called gdb-$(VERSION).tar.Z but which unpacks into a
+	directory called "gdb".  Move non-source files out of
+	$(SFILES_SUBDIR).  Pretty up alldeps.mak with comments.
+	(depend):  Don't try to do "gcc expread.y".
+	(expread.o):  Update dependencies by hand.
+
+Mon Jul 29 15:21:09 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/gdb.texinfo:
+	Fixed a variety of small typos that prevented info from formatting
+	cleanly; altered too-long heading for GPL Appendix, as discussed
+	w/RMS; Changed date on cover to July 91.
+
+Fri Jul 26 13:20:02 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* doc/gdb.texinfo:
+	(1) Applied some fixes due to comments from Larry Breed (easier ones
+	through chapsec 5.2)
+	(2) Eliminated use of @footnote---had my doubts about it anyways, and
+	it's broken in latest texinfo
+	(3) Introduced *some* use of [] for optional arguments, where
+	explanation is not simpler by listing cmd w arg and cmd w/out arg
+	separately.  Still not using @deffn.
+	(4) Dropped in GPL-2.  NOTE: one of GPL-2 or texinfo is broken; a
+	couple of headings are too long.  Need patches to texinfo or revision
+	to GPL-2.
+
+	* Partial update to README (which still needs work for this
+	release!): (1) use of configure corrected for new script, 
+                   (2) "make gdb.dvi" and "make gdb.info" mentioned.
+
+Wed Jul 24 06:44:02 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* symtab.c (lookup_symbol):  Don't complain right off about
+	no debug symbols; use the misc function vector first.
+	(list_symbols):  Use misc function vector to find symbols
+	that don't have debug info, and print them.
+	(find_pc_symtab):  Temporarily avoid fatal() when psymtab
+	PC range doesn't match symtab PC range, as it does on the 
+	MIPS because our symtab reading isn't perfect.
+
+	* dbxread.c (dbx_symfile_read):  Make warning about
+	"no debug symbols" slightly nicer.
+
+	* source.c (select_source_symtab):  If "main" symbol exists,
+	but decode_line_spec can't find line info, don't just return
+	a zero; try other source symtabs or give an error.
+
+	* mipsread.c (parse_partial_symbols):  Sort the psymtabs by
+	their low addresses first, then rip through fixing high addrs.
+
+	* ns32k-opcode.h (sfsr):  Bugfix from Rune Nerg}rd,
+	<runene@ifi.uio.no>.
+	(NS32K_SVC_IMMED_OPERANDS):  Reverse the #ifndef.
+
+Tue Jul 23 18:52:43 1991  Roland H. Pesch  (pesch at cygint.cygnus.com)
+
+	* Minor, mostly mechanical, cleanup of doc subdir for clean 
+	makeinfo'ing and TeXing; also ensured gdb-all.texinfo (post-m4) 
+	and gdb.info (post- texinfo2 makeinfo) generated for distribution.
+
+Sun Jul 21 03:54:52 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Mostly MIPS and general symbol-reading fixups.
+
+	* doc/gdbint.texinfo:  Add documentation on symbol-reading
+	interface.
+
+	* mipsread.c:  Remove kludges around #include "ecoff.h".
+	Remove redefinitions of a_magic, etc, no longer used.
+	(parse_symbol, ):  Convert "Internal:" printfs to complain()ts.
+	Fix global overview comments to match symfile.c protocol.
+	(mipscoff_new_init):  Eliminate cur_hdr if we have one.
+	(mipscoff_symfile_read):  Eliminate unused code.  Avoid
+	sorting all the symtabs, when all we have read here is psymtabs.
+	The symtabs are sorted as they are created anyway.  Tell
+	condense_misc_bunches whether we're mainline.
+	(psymtab_to_symtab_1):  Pass filename when recursing, to make
+	stack trace more informative.
+	(parse_partial_symbols):  Assume cur_hdr as argument.
+	(read_mips_symtab):  Don't clobber cur_hdr, so it can be freed.
+	Pass cur_hdr implicitly to parse_partial_symbols.  Avoid checking
+	the TYPE_NAME of char *, since that's done in symfile.c.
+	(free_numargs, parse_symbol, add_symbol, add_block,
+	shrink_linetable):  Declare these fns void. 
+	(upgrade_type):  Convert tree of if's to switch.  Clean up
+	bogus "off == 0" handling with a complaint.  Avoid setting
+	field bitpos and bitsize of array with lower and upper bounds.
+	Check specified bitsize of elements against their actual type's
+	bitsize, and complain if different.  Complain about unknown 
+	type qualifiers.
+	(parse_fdr):  Don't assume sizeof(char *) == sizeof (struct *).
+	(psymtab_to_symtab_1):  Print names of subsidiary files that
+	are being read in.  FIXME, we read far too many files.  This code
+	is not the problem, the problem is in parse_fdr where the psymtabs
+	are set up.
+	(cross_ref):  Result should indicate that we used one aux entry
+	normally, or two if we encountered a "next" entry.  This used
+	to leave the caller pointing at the wrong aux entry.
+	(add_symbol):  If overflowed cur_block, reallocate it larger,
+	chase all pointers to it, and complain(), rather than clobber memory.
+	(shrink_block):  Use xrealloc rather than xmalloc-and-copy.
+	(new_field):  Only allocate one field initially, not two.
+	Pull ++ out of macro argument.  Simplify.
+	(_initialize_mipsread):  Avoid initialization of importd
+	global_psymbols and static_psymbols. 
+
+	* symfile.c (psymtab_to_symtab):  Depend on XXX_psymtab_to_symtab
+	to properly set pst->symtab; avoid searching for it.
+	(symfile_fns):  Improve comments, add a FIXME.
+	* dbxread.c:  Update comments to reflect symfile protocol.
+	(read_ofile_symtab, end_symtab):  Return the symtab.
+	(psymtab_to_symtab_1):  Set pst->symtab.
+
+	* coffread.c (coff_symfile_read):  tell condense_misc_bunches
+	whether we're mainline.
+
+	* symfile.h (sym_fns):  Remove unused sym_discard member.
+	* coffread.c, mipsread.c, dbxread.c:  Remove XXX_symfile_discard.
+
+	* mtrace.c (mtrace):  Take effect if mallwatch is set, even if
+	the environment variable is not.
+	* infcmd.c (finish_command):  Use filtered printfs.
+	* cplus-dem.c:  Add struct tags to a few unnamed structs.
+	* valops.c (value_coerce_array):  Improve comments.
+	* valprint.c (type_print_varspec_suffix):  Print array size only
+	if greater than zero.
+	* m88k-tdep.c:  Shift some lines left by one space, that had
+	apparently been trashed at some point.
+	* TODO:  More things to do, a few got done.
+
+Thu Jul 18 22:46:05 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* symtab.h (LOC_EXTERNAL):  Eliminate in favor of LOC_STATIC.
+	(ldsymoff, ldsymlen, globals_offset, statics_offset): Improve
+	comments.
+	* dbxread.c (read_dbx_symtab):  LOC_EXTERNAL -> LOC_STATIC.
+	* expread.y, findvar.c, symmisc.c:  Ditto.
+	* printcmd.c (address_info):  Update printed forms of LOC_
+	symbols.  Elim LOC_EXTERNAL.  
+	(print_frame_args):  Keep track of param stack offsets before
+	re-looking up to find the local register param is kept in.
+
+	* mipsread.c:  Use <symconst.h> and <sym.h> rather than <syms.h>.
+	Further integration of mipsread into gdb.  Eliminate unused
+	routines, duplicate declarations.  Handle static symbols in 
+	psymtabs as well as external symbols.  When reading symtabs,
+	insert symbols into the correct block (global, static, or a local
+	block).
+	(read_mips_symtab, parse_partial_symbols):  Don't pass useless
+	"incremental" arg.
+	(mipscoff_symfile_read):  Don't call select_source_symtab.
+	(parse_symbol):  Use SYMBOL_VALUE_ADDRESS where appropriate,
+	rather than SYMBOL_VALUE.
+	(parse_external):  Comment clobbering of top_stack.
+	(parse_partial_symbols):  Update comments.  Allocate and parse
+	static symbols as well as external symbols.  FIXME, enum values
+	are not handled in this pass, but should be.  Inline new_psymbol.
+	Use SYMBOL_VALUE_ADDRESS.
+	(psymtab_to_symtab_1):  Read symbols into global static block
+	by default (until enter some function's local block context).
+	(sort_blocks):  Clean up STATIC_BLOCK as well as GLOBAL_BLOCK.
+	(destroy_all_symtabs, new_psymbol):  Eliminate, unused.
+
+	* source.c (select_source_symtab):  Select a source symtab
+	from either the symtabs or, failing that, the psymtabs.
+	(list_command):  Update error message.
+	(forward_search_command, reverse_search_command):  Use getc, not
+	fgetc, for speed.  FIXME, add comment about buffers that die if
+	overrun by long line.
+
+	* values.c (unpack_field_as_long, modify_field):  Avoid shifting
+	by an entire word, which is not portable, if we have a 32-bit
+	field.  (Code in dbxread.c already turns such bitfields, if
+	aligned, into ordinary ints, but fixing this will help for other
+	symbol formats and for future changes.)
+	* core.c (core_open):  Handle ANSI const brain death.
+	* utils.c (vprintf):  Fix varargs typo.
+
+Sun Jul 14 00:42:53 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* findvar.c (find_var_value):  Handle &function better.
+	* TODO:  Document work needed on &fn and &array.
+	* printcmd.c (print_address_symbolic):  New arg is the prefix
+	to print if a name is printed.
+	(print_address_demangle):  Honor "set print address" now.
+	Use new arg above to improve spacing of output.
+	* valprint.c (val_print):  When printing function pointers,
+	print symbolic form too.
+	* breakpoint.c (breakpoint_1):  Use new print_address_symbolic.
+
+Mon Jul  8 19:02:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* core.c (memory_error):  Reword error msg to mislead less.
+
+	* mips-pinsn.c (print_insn_arg 'd'):  Print $ with reg name.
+
+	* mipsread.c (read_mips_symtab, read_the_mips_symtab,
+	parse_partial_symbols): Use newer BFD internals (external_filehdr
+	and external_aouthdr), byte-swap the fields that we care about
+	before using them, and make the file header data local to
+	read_the_mips_symtab rather than global.
+
+Sat Jul  6 01:34:15 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* ns32k-opcode.h (movmw, movmd):  Fix opcodes.  Bug fix
+	from Rune Nerg}rd <runene@ifi.uio.no> on 5 Jul 1991.
+
+	* main.c (command_line_input):  Flush stdout and stderr
+	before every call to readline.  This reportedly fixes a bug
+	that comes up in Sys V running emacs-gdb and/or xxgdb,
+	when stdin/out are pipes or sockets.
+
+Thu Jul  4 14:47:06 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* configure.in, Makefile.in:  Avoid rebuilding "depend" as much.
+	Avoid declaring Makefile dependencies, because GNU Make stupidly
+	tries to update it if we do.
+
+	* coffread.c:  Revise for minor changes to bfd internal coff
+	indexes.
+
+	* configure:  If -template= is given a relative path, make it 
+	absolute before recurring in subdirectories.
+
+	* configure, configure.in, Makefile.in:  Install "configure" script
+	as replacement for config.gdb.
+	* config.gdb, Makefile.dist, Makefile.sdir:  Remove
+	* README:  Update for configure, mostly.  FIXME.
+
+	* Add dec3100 as equivalent to littlemips.  Indicate in all host &
+	target config files that they are for the host.  When the lines
+	get copied into the Makefile, this makes it more obvious what's
+	up.
+
+Mon Jun 24 23:49:07 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* sparc-opcode.h (trap opcodes):  Avoid leading spaces or
+	tabs, which end up in the disassembler output inadvertently.
+
+Wed May 29 23:01:03 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Make it compile cleanly in an ANSI GCC2 environment.
+
+	* blockframe.c:  <stdio.h>
+	* cplus-dem.c:  free takes a void *, ifdef __STDC__
+	* dbxread.c (read_huge_number):  avoid gcc2 bug hoisting calc of
+	LONG_MAX/radix.
+	* defs.h (alloca):  Avoid doing anything if alloca already def'd.
+	* stddef.h, stdlib.h:  Remove these files.
+	* symtab.c:  Avoid declaring qsort, close.
+	* symfile.c:  Avoid declaring close.
+	* utils.c (vprintf):  Declare "ap" arg as proper va_alist.	
+	* sparc-tdep.c:  Avoid including lots of Sun-host-specific files.
+
+	Assorted other changes.
+	* dbxread.c:  include "libaout.h", not "liba.out.h".
+	* printcmd.c (print_frame_args):  Set recurse properly for
+	indentation of struct and array parameters.
+	* valops.c (value_cast):  Allow cast to void.
+	* infrun.c (resume):  If NO_SINGLE_STEP, call machine dependent
+	single_step() in a target-independent fashion.
+	* sparc-tdep.c (single_step):  Don't call ptrace ourselves, just
+	set up to be ready to continue.  This makes us target independent.
+	* infptrace.c (child_resume):  Remove call to single_step; now
+	can single step a SPARC target of any kind.
+
+Wed May 22 18:18:24 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* Makefile.dist, doc/gdb.texinfo, doc/*-m4.texinfo: split up GDB
+	docn into separate sections---basically chapters, plus two loose
+	pieces that can be configured to go in different places.  This
+	allows GNU m4 to preprocess the manual without coredumping.
+
+	* Makefile.dist: tell TeX where to find texinfo.
+
+Mon May 20 12:15:04 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* Makefile.dist, doc/gdb.texinfo: respectively create, and use,
+	the new target "rdl-apps.texinfo" which captures the Makefile
+	variable that records where to find the Readline libraries.
+
+Sun May 19 05:36:59 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* tahoe-pinsn.c:  #include "tahoe-opcode.h", not "opcode.h".
+	* tm-tahoe.h (FIX_CALL_DUMMY):  Ignore more parameters.
+	* defs.h (const, volatile):  Only define if not already defined.
+	* Makefile.dist (gdb.tar.Z):  Create doc subdir w/out CVS/RCS crud.
+
+	* README:  Update for release 3.95.
+	* config.gdb:  Don't create readline dir in subdir builds.
+	* main.c:  Include with "..." form for non-system include files,
+	so "gcc -MM" for "make depend" works.
+	Include readline files with "...h" rather than <readline/...h>.
+	* mipsread.c:  Include "ecoff.h" rather than "intel-coff.h".
+
+	* coffread.c:  Undo minor damage done by Rich Pixley.  Use
+	different internal and external representations of COFF
+	data structures.  Use new BFD routines for swapping them in and
+	out.
+	* symfile.c (free_named_symtabs):  Avoid freeing file names that
+	are null or empty.  Old i960 tools seem to produce files that
+	claim to have empty names, causing each successive file read
+	to blow away the previous one.
+	* sparc-xdep.c (deferred_stores):  Repair minor damage by Rich.
+	Move deferred_stores to top of file, but don't separate its
+	#define's from its variable.  Add commentary.
+	* Makefile.dist:  Fix Rich damage; undo "configure" changes in
+	favor of keeping the (working) config.gdb.  Move readline
+	library up a notch.
+
+Fri May 17 12:49:56 1991  Per Bothner  (via gnu at cygint.cygnus.com)
+
+	* dbxread.c (read_struct_type):  Try to handle g++ version 1 MI
+	debug info.
+	* infptrace.c (fetch_registers):  no result, since now void.
+	* tconfig/news:  target depends on m68k-tdep too.
+
+Fri May 17 14:40:14 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* Makefile.dist: added readline/inc-*.texinfo to dependencies for
+	gdb.dvi target
+
+	* readline/inc-history.texinfo, readline/inc-readline.texinfo:
+	applied various small fixes due to or inspired by RMS comments
+
+	* doc/gdb.texinfo: finished using all RMS comments, save those for
+	appendices on readline and cmd history (which are in other source
+	files) 
+
+Thu May 16 18:06:05 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* doc/gdb.texinfo: (1) Updated w/ref to RMS comments through
+	chapter 9; (2) documented 'break' command's menu mode for
+	overloaded names, in response to hgs problem report C++ p-31
+
+Wed May 15 11:02:48 1991  Roland H. Pesch  (pesch at fowanton.cygnus.com)
+
+	* doc/gdb.texinfo: (1) better introductory example; (2) more
+	consistent use of @code, @samp, @file, @kbd throughout; small
+	cleanups to first three nodes; (3) new "Contributors" node;
+	(4) Appendix, Renamed Commands; (5) divert specialized startup
+	instructions to "Targets" chapter for generic manuals, while
+	leaving them up front for manuals specific to specialized
+	environments; (6) apply fixes from RMS comments through chapter 4.
+
+	* pretex.m4: modify explanatory text slightly (and redefine
+	"regexp") to keep GNU m4 from complaining.  (It still crashes
+	later, but one step at a time...)
+
+Wed May 15 10:32:12 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* readline/readline.c (update_line):  Avoid dereferencing a pointer
+	before comparing it to its bounds.  Saber caught this.
+	(init_terminal_io):  Don't set BC from the "pc=" termcap variable,
+	and only set PC if tgetstr returned non-null.  Saber caught this.
+
+Tue May 14 16:29:53 PDT 1991  Roland Pesch (pesch at cygint.cygnus.com)
+
+	* Makefile.dist: put gdb.dvi stuff (updated to use M4 preprocessor
+	stuff for config manual) here where it counts; updated
+	to use new subdir structure (gdb/doc/).
+
+	* Makefile: generated from above via 
+		    config.gdb none 
+	before checkin
+
+	* gdbint.texinfo: added instructions on generating gdb.info* files
+	locally for release.  These are ordinary info
+	files, formatted from gdb.texinfo (via gdb-all.texinfo, see
+	Makefile)---but due to use of texinfo 2, can't count on makeinfo
+	to generate these, so we distribute them already formatted.
+
+	* gdb.texinfo: included full Info node and menu crud (as generated
+	by C-u M-x texinfo-master-menu using the texinfo-2 elisp code).
+
+	* Makefile: updated "gdb.dvi" target to use M4 preprocessor;
+	put in comments-for-future gdb.info target (one day makeinfo will
+	work again).
+
+Tue May 14 13:51:36 PDT 1991  Roland Pesch (pesch at cygint.cygnus.com)
+
+	* gdb.texinfo: Updated to include new or old undocumented
+	commands, at least the following (perhaps some others I forgot to
+	record): info f, info float, info path, info program, info s, info
+	set, info source, info terminal, info types, info user, set/show
+	print object.  
+	Also covered all recent GDB command renames for v4.
+
+Mon May 13 14:57:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* mipsread.c:  Rather than keeping count of how many symtabs
+	and psymtabs we have, for sorting purposes, count them when
+	we need to sort.  This fixes bug in rereading of symbol tables.
+
+Fri May 10 15:43:33 PDT 1991  Roland Pesch (pesch at cygint.cygnus.com)
+
+	* infcmd.c: renamed "info path" to "show paths"
+        * gdbrc.tex: documented above.
+
+Wed May  8 04:51:11 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* remote.c:  Fix comments.
+	* utils.c (error):  Force out any pending wrap output.
+
+Sat May  4 11:11:07 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* Makefile.dist:  Roll VERSION to 3.95.
+	Fix up "saber_gdb" to work again.
+	* saber.suppress:  Update.
+
+	* coffread.c, exec.c, infptrace.c, inftarg.c, remote.c, solib.c,
+	symtab.h, target.c, target.h:  Lint.
+	* core.c:  setup and select frame after reading shared libs,
+	else reading shared libs will clobber them.  Lint.
+	* utils.c (error):  Force out any buffered wrap text.
+
+Fri May  3 22:01:56 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* remote.c:  Remove decls of memory_insert_breakpoint
+	and memory_remove_breakpoint, no longer used.  (Suggestion of
+	Jan Norden).
+
+	* Makefile.dist:  use ${subdir} in paths of BFD and LIBIBERTY,
+	to make it easier to interface to "configure"'d libraries.
+
+Fri May  3 13:10:01 PDT 1991  Roland Pesch (pesch at fowanton.cygnus.com)
+
+        * valprint.c:  introduce "set p", "set pr", "show p" and "show pr" as
+	aliases for set/show print.
+
+Thu May  2 11:22:02 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* coffread.c (coff_sym_fns) [TDESC]: Make the type be m88kbcs.
+
+	* m88k-tdep.c (IEEE_isNAN): New function.
+
+	* infrun.c, m88k-tdep.c, m88k-xdep.c: Change
+	initialize_{tdesc,dcontext} to init_{tdesc,dcontext}.
+
+	* infrun.c [TDESC]: Add a bunch of crud.
+
+	* xm-88k.h [__GNUC__]: Don't define memset.
+
+	* m88k-xdep.c: #if 0 out push_breakpoint.
+
+	* tm-88k.h: Define GET_SAVED_REGISTER.
+
+	* tm-88k.h: Define DGUX.
+
+	* m88k-opcode.h (UEXT, SEXT, MAKE): Put parentheses around arguments.
+
+	* m88k-pinsn.c (sprint_address): Declare at top of file.
+
+	* m88k-xdep.c: #if 0 out core_file_command.
+
+	* values.c ({unpack_,value_as_}pointer): Just call
+	{unpack_,value_as_}long (for now anyway).
+
+	* m88k-tdep.c (get_saved_register): Make get_reg a dc_word_t (*)().
+	(psr_register): Change return type to dc_word_t.
+
+	* m88k-tdep.c (tdesc_read_function): Comment out call to ptrace.
+
+	* m88k-tdep.c (get_saved_register): Add lvalp parameter.
+
+	* gdbcore.h (write_memory): Don't prototype it.
+
+	* tm-88k.h, m88k-tdep.c: Make stack_error, stack_jmp global.
+	m88k-xdep.c: Don't mention stack_error.
+
+	* {x,t}config/m88k ({X,T}DEPFILES): Add missing files.
+
+	* mtrace.c: Don't typedef things like size_t, just #define them.
+
+	* coffread.c [TDESC]: #if 0 out references to coffsyn.
+
+	* symtab.h (struct symtab): Include EXTRA_SYMTAB_INFO.
+	tm-88k.h: Define EXTRA_SYMTAB_INFO.
+
+	* coffread.c [TDESC]: Include "tdesc.h" and make tdesc_handle
+	dc_dcontext_t not int.
+
+	* coffread.c [TDESC]: Use system include files not <intel-coff.h>.
+
+	* coffread.c [TDESC]: Move setting of debug_info from
+	coff_symfile_read to find_linenos and make it work with BFD.
+
+	* cplus-dem.c [__STDC__]: Make x{m,re}alloc return void*.
+
+	* signame.c: Cast const char* to char* when assigning to sys_siglist.
+
+	* utils.c (strsave): Make arg const char* not char*.
+
+	* infrun.c (wait_for_inferior) [SHIFT_INSN_REGS]: Use
+	bpstat_explains_signal (stop_bpstat) not stop_breakpoint.
+
+	* tm-88k.h (START_INFERIOR_HOOK): Make tdesc_handle a dc_handle_t.
+
+	* tm-88k.h (EXTRACT_RETURN_VALUE): Use char * not void *.
+
+	* findvar.c (read_var_value, case LOC_CONST_BYTES): Put the address
+	in a char *, not a CORE_ADDR.  Use SYMBOL_VALUE_BYTES.
+
+	* tm-88k.h (INIT_EXTRA_FRAME_INFO): Use fci not prev (fci is
+	prev except from create_new_frame).  Make next_frame a
+	local variable.
+	Declare get_prev_context.
+	{x,t}m-88k.h: Enclose USG and BCS defines in #if !defined.
+	m88k-{opcode.h,pinsn.c,xdep.c,tdep.c}: New files (same contents as
+	before; they had just been left out of the distribution for a long
+	time).
+
+Thu May  2 17:53:56 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Mips bringup and general cleanup
+
+	* cplus-dem.c:  Move CPLUS_MARKER define to after defs.h.
+	* infptrace.c (PT_WRITE_D, PT_READ_D):  Use correct values.
+	(This still doesn't seem to make MIPS bkpts work.)
+	* mipsread.c:  Remove dup "Reading symbol data..." msg.
+	(symbol_file_command, add_file_command):  Remove, obsol.
+	* printcmd.c (ptype_command):  Say "an enum" rather than "a enum".
+	Wrap output appropriately.
+	* stack.c (locals_info, catch_info, args_info):  Check
+	selected_frame rather than target_has_stack or coredumping.
+	* valprint.c (type_print_varspec_suffix):  Wrap "ptype" output of
+	enums appropriately.
+
+Wed May  1 14:10:22 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* signame.c: Include defs.h and param.h.
+
+	* cplus-dem.c: Include defs.h and param.h.
+	Makefile.dist: Don't hack in the "param.h".
+	param.h: Don't include defs.h.
+
+	* expread.y: Use a union to deal with the fact that type_stack
+	can have both ints and enum type_pieces in it.
+	({push,pop}_type_int): New functions.
+
+Tue Apr 30 13:18:58 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* cplus-dem.c (cplus_mangle_opname): Don't call error.
+	values.c (check_stub_method): Call error if NULL return from
+	cplus_mangle_opname.
+
+	* blockframe.c, breakpoint.c, core.c, command.c, findvar.c,
+	eval.c, expprint.c, infcmd.c, infrun.c, main.c, printcmd.c,
+	remote.c, source.c, stack.c, dbxread.c, coffread.c, symfile.h,
+	symfile.c, utils.c, valarith.c, values.c, valops.c, tm-68k.h,
+	target.c, inftarg.c, ieee-float.c, environ.c, defs.h,
+	command.h, inferior.h, gdbcore.h, symtab.h, expression.h,
+	symtab.c, cplus-dem.c, value.h, expread.y, valprint.c,
+	copying.awk, solib.c, inflow.c, symmisc.c
+	: Lint.  Use read_memory not read_memory_integer on CORE_ADDR's.
+	Use {value_as,unpack}_pointer (added to values.c)
+	not {value_as,unpack}_long on CORE_ADDR's.
+	Use longest_to_int (added to defs.h) instead of cast to int.
+	Remove from_tty arg to mod_path.
+	Put symfile_bfd in {coff,dbx}read.c not symfile.h.
+	Use OP_NULL instead of 0 where dummy enum exp_opcode needed.
+
+	* tm-sparc.h: Remove GET_RWINDOW_REG.
+	(FRAME_CHAIN): Call sparc_frame_chain.
+	sparc-tdep.c (sparc_frame_chain): New function.
+	tm-sparc.h (EXTRACT_STRUCT_VALUE_ADDRESS): call
+	sparc_extract_struct_value_address (added to sparc-tdep.c).
+
+	* xm-sun386.h: Don't define SET_STACK_LIMIT_HUGE.
+
+Tue Apr 30 13:13:33 1991  Michael Tiemann  (tiemann at cygint.cygnus.com)
+
+	* valprint.c (type_print_base): If the type being printed is a
+	struct containing undefined types, print "<undefine type>"
+	as the type instead of crashing.
+	* values.c (value_headof): Get the vtable pointer taking
+	TYPE_VPTR_BASETYPE into account.
+	* symtab.c, symtab.h, dbxread.c: Fix various whitespace splotches.
+
+Mon Apr 29 13:22:51 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* Move BROKEN_LARGE_ALLOCA from tm-sun386.h to xm-sun386.h.
+
+	* sun386-xdep.c [!GDB_TARGET_IS_SUN386]: Just provide empty
+	functions which don't do anything.
+	tm-sun386.h: Define GDB_TARGET_IS_SUN386.
+
+	* Makefile.dist: Add comment about tm-sun3os4.h: tm-sun3.h, etc.
+
+	* sun3-xdep.c, tm-sun3.h, tm-68k.h: Change TARGET_SUN3 to
+	GDB_TARGET_IS_SUN3.
+
+	* infrun.c: Don't include sys/user.h and friends (wrong for
+	cross-debugging and not necessary anymore (see IN_SIGTRAMP in
+	xm-vax.h)).
+	[SET_STACK_LIMIT_HUGE]: Include <sys/{resource,time}.h>.
+	xm-tahoe.h: Don't define _DIRENT_.
+
+	* xm-tahoe.h: Remove USE_OLD_TTY (not needed now that terminal.h
+	includes sgtty.h before sys/ioctl.h).
+
+Sun Apr 28 22:04:47 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* param-no-tm.h: Make BITS_BIG_ENDIAN defined to 0/1, not defined
+	or not defined.  Don't define it based on TARGET_BYTE_ORDER if
+	it's already defined (in the tm.h file).
+	mips-opcode.h (BIT_FIELDS_*),
+	values.c (modify_field, unpack_field_as_long):
+	Use #if BITS_BIG_ENDIAN not #ifdef BITS_BIG_ENDIAN.
+	{x,t}m-tahoe.h, tahoe-pinsn.c, tahoe-opcode.h: New files.
+
+Fri Apr 26 12:02:06 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* tm-sparc.h: Add comments about gcc version 2 and structure passing.
+
+	* xconfig/i386v{,32}{,-g}: Add XM_CFLAGS=-Dgetpagesize()=4096.
+	gmalloc.c: #if 0 out !HAVE_GETPAGESIZE code.
+
+	* expread.y (abs_decl): Accept '&' and '&' abs_decl.
+
+	* symtab.c, symtab.h: Have a builtin_type_{,unsigned_}long_long
+	regardless of LONG_LONG.
+	defs.h (TARGET_LONG_LONG_BIT): New macro.
+	expread.y (typebase): Add {unsigned,} long long {,int}.
+
+Thu Apr 25 12:31:22 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* valops.c (typecmp): If t2 == 0, return 1.
+
+Wed Apr 24 09:45:17 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+	Changes from Tiemann:
+	* cplus-dem.c (optable): Add "nw", "dl", "compound".
+	(cplus_mangle_opname): New function.
+	(do_type): Add case 'Q'.
+	* values.c (check_stub_method): Do lookup_method_type and stuff
+	rather than smash_to_method_type.
+	symtab.c, symtab.h (allocate_stub_method): New function.
+	dbxread.c (read_type): If we get "##", don't lookup_function_type
+	and start clobbering it; allocate_stub_method instead.
+	* printcmd.c (x_command): Dereference references.
+	* valprint.c (type_print_varspec_prefix, case TYPE_CODE_METHOD):
+	Don't print " " type_print_base (...) "::" if !passed_a_ptr.
+	* dbxread.c (read_struct_type): Put "op$" instead of "operator"
+	in the symbol table.
+	* values.c (check_stub_method): Deal with operator names.
+	* valprint.c (cplus_val_print): Check for error in baseclass_addr.
+	* values.c: Move declaration of cplus_demangle to top of file.
+	* values.c (baseclass_addr): If can't read memory, set *ERRP
+	rather than calling error().
+	* value.h: Remove redundant declaration of value_static_field.
+	* values.c (value_static_field): Recursively check all baseclasses.
+	Return NULL if not found.
+	* values.c, value.h: New functions value_{headof,from_vtable_info}.
+	* valprint.c (val_print): Print out first element of vtbl
+	specially.
+	* valprint.c: Move print controls to top and add objectprint.
+	Add command "set print object on/off".
+	* valprint.c (value_print, is_vtbl_member): Put things in local
+	variables rather than continually doing VALUE_TYPE (val), etc.
+	* valops.c (value_struct_elt_for_address): Call check_stub_method.
+	* valops.c (value_struct_elt): Remove found, arg1_as_ptr.
+	* valops.c (search_struct_method): Give error if j > 0 && args == 0.
+	* valops.c (search_struct_field): New argument looking_for_baseclass.
+	Give error if value_static_field or value_primitive_field
+	return NULL.
+	valops.c (various): Call search_struct_field with extra parameter.
+	* symtab.c (decode_line_1): Deal with operators specified as
+	"operator" <optional whitespace> <symbols for operator>.
+	(operator_chars): Help do it.
+	* symtab.c (lookup_struct_elt_type): Call check_stub_type.
+	Take additional argument noerr.
+	Don't dump core if TYPE_FIELD_NAME is NULL.
+	Check the baseclasses recursively.
+	* symfile.c (fill_in_vptr_fieldno): Don't call check_stub_type.
+	Return void not int. (also declarations in symfile.h and value.h).
+	Deal with multiple inheritance.
+	* printcmd.c (print_command_1): Add if (objectprint) code.
+	* expread.y (variable): Allow for destructor with foo::~name.
+	* eval.c (evaluate_subexp, case UNOP_LOGNOT): If following opcode
+	is OP_SCOPE, give an error.
+	* eval.c (evaluate_subexp): Pass third arg to lookup_struct_elt_type.
+	* eval.c (evaluate_subexp), values.c (value_virtual_fn_field):
+	Don't bother to do anything with
+	return value from fill_in_vptr_fieldno.
+	* eval.c (evaluate_subexp): If value_static_field returns NULL,
+	give an error.
+	* dbxread.c (read_struct_type): Set fcontext to 0 for normal member
+	function.
+	* dbxread.c (read_struct_type): Initialize name to 0.
+	* dbxread.c (read_ofile_symtab, N_CATCH): Add offset to bufp->n_value.
+	* dbxread.c (dbx_create_type): Zero TYPE_VPTR_BASETYPE.
+	(read_struct_type): Don't bother to set TYPE_VTPR_{BASETYPE,FIELDNO}
+	if it's just going to be {0,1}.
+
+	* dbxread.c (virtual_context): Use TYPE_BASECLASS starting at 0
+	(yes, it's #if 0, but just in case...).
+
+	* vax-opcode.h, expread.y, expprint.c, cplus-dem.c: Declare some
+	things "const".
+
+	* i386-stub.c: New file.
+
+	* WHATS.NEW: Remove mention of readline and more paging (in 3.5).
+	Try to keep command names up to date with renaming.
+
+	* gmalloc.c [!HAVE_GETPAGESIZE]: Try to figure out the pagesize.
+
+	* infun.c (resume, resume_cleanups): New functions.
+	(wait_for_inferior, proceed, child_create_inferior): Use resume
+	not target_resume.
+
+	* remote.c (getpkt): Don't set immediate_quit.
+
+	* blockframe.c, frame.h (reinit_frame_cache): New function.
+	solib.c (solib_add), symfile.c ({,add_}symbol_file_command):
+	Use it.
+
+Tue Apr 23 10:38:41 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* symtab.c (lookup_symbol): Add 3 more of those loops through
+	the symtabs which we all know and love: (1) Look in the
+	STATIC_BLOCK for mangled symbols right after we check the blocks,
+	(2, 3) Look in the STATIC_BLOCK for all the symtabs and psymtabs
+	at the end.
+
+	* main.c (cd_command): Call dont_repeat.
+
+	* dbxread.c (read_struct_type): If const/volatile character is
+	missing, don't complain, just continue.
+
+	* dbxread.c (read_struct_type): Only try to read the fcontext if
+	it is there.  Also change "error_type " to "return error_type ".
+	values.c (value_virtual_fn_field): If there is no fcontext,
+	then do things the way GDB 3.x did.
+	valops.c (search_struct_method): Add type to value_virtual_fn_field
+	arguments.
+
+	* dbxread.c (read_struct_type): Fix typo: *pp != '\0' -> **pp != '\0'.
+
+Mon Apr 22 00:02:43 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* printcmd.c (print_scalar_formatted): Add 't' for binary.
+
+	* dbxread.c (end_psymtab): Initialize pst->symtab.
+
+	* core.c (core_open): Call ADD_SOLIB.
+
+	* tm-sparc.h: Include <sun4/reg.h> not <machine/reg.h>.
+	sparc-tdep.c: Don't include <machine/reg.h>.
+
+	* sun3-xdep.c [!TARGET_SUN3]: Just provide empty functions which
+	don't do anything.
+
+	* core.c (core_open): Add make_cleanup (unpush_target, &core_ops).
+
+	* Shared library/corefile changes from Peter Schauer:
+	core.c (core_close): Call CLEAR_SOLIB.
+	(core_open): Remove comment about "should deal with shared lib".
+	(core_xfer_memory): If we can't xfer the usual way, try the
+	shared libraries.
+	solib.c (so_list): New fields so_bfd and so_sections{,_end}.
+	(find_solib): Use solib_map_sections to get ld_text.
+	(solib_map_sections, solib_xfer_memory): New functions.
+	(clear_solib): Free so_sections and close so_bfd.
+	tm-sunos.h: Add solib_xfer_memory, solib_add.
+
+	* sparc-tdep.c (skip_prologue): Don't skip anything unless there
+	is a "save" instruction in there somewhere.
+
+	* symfile.c (symbol_file_add): Add comment.
+	solib.c (solib_add): Don't malloc name passed to symbol_file_add.
+
+	* exec.c (build_section_table): If *start isn't NULL, free it.
+	
+	* stack.c (parse_frame_specification): Error if NULL selected_frame.
+	infcmd.c (finish_command): Error if NULL selected_frame.
+	inflow.c (kill_command): Deal with NULL selected_frame.
+	stack.c (record_selected_frame): Set *FRAMEP to NULL if there
+	is no selected frame.
+	infrun.c (restore_inferior_status): Add comment.
+	findvar.c (read_var_value): Check for NULL frame where we need
+	a frame.
+	breakpoint.c (get_catch_sals): Check for NULL selected_frame.
+
+	* breakpoint.c (bpstat_print): Try all elements on the bpstat
+	chain before giving up with an internal error.
+
+Sun Apr 21 21:43:10 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* value.h, values.c (value_{,free_to_}mark): New functions.
+	breakpoint.c (bpstat_stop_status): Use them.
+
+	* tm-i386v{,-g}.h: Remove N_SET_MAGIC define.
+
+Sat Apr 20 21:42:47 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* i386-tdep.c: Remove unnecessary #includes.
+
+	* symtab.c (various): Change error return of find_line_common to -1.
+
+	* coffread.c (find_linenos): Use LINESZ not sizeof (struct lineno).
+
+	* coffread.c (end_symtab): Initialize language, dirname, and
+	fullname fields.
+
+Fri Apr 19 18:18:31 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* mips-tdep.c (mips_frame_chain): Don't chain if saved_pc == 0.
+
+	* stddef.h (size_t): Let either _SIZE_T or _SIZE_T_ guard it.
+
+	* mipsread.c (parse_symbol): Set startup_file_{start,end} if
+	entry_point is in current file.
+
+	* findvar.c (read_register_gen): Add "target byte-order" comment.
+
+Wed Apr 17 17:09:48 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* i386-tdep.c (i386_get_frame_setup): Use SWAP_TARGET_AND_HOST
+	before returning locals or slocals.
+
+	* i386-tdep.c (i386_follow_jump): Do not add data16 to pos in
+	call to codestream_seek; add one to pos if (and only if)
+	we are dealing with a jump with data16 == 1 (i.e. 0x66, 0xe9).
+
+Mon Apr 15 12:04:32 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* valops.c (call_function_by_hand): Put dummy1 in target order
+	before FIX_CALL_DUMMY.
+
+	* tm-i386v.h (FIX_CALL_DUMMY): Don't depend on host byte order.
+
+Sun Apr 14 11:55:19 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* valops.c (push_word): Add SWAP_TARGET_AND_HOST.
+
+	* remote.c (remote_open): Send '+' before calling putpkt().
+
+	* tm-i386v.h (REGISTER_VIRTUAL_TYPE): Return pointer to void,
+	not int, for pc, fp, and sp.
+
+	* remote.c (remote_open): Call start_remote after putpkt("?");
+	infrun.c (start_remote): Also call wait_for_inferior & normal_stop.
+
+Sat Apr 13 22:11:42 1991  Jim Kingdon  (kingdon at spiff.cygnus.com)
+
+	* exec.c: Include <ctype.h>.
+
+	* sun3-xdep.c (fetch_core_registers): Add #ifdef FP0_REGNUM.
+
+Fri Apr 19 09:36:50 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* tm-68k.h (NUM_REGS): Conditionalize on TARGET_SUN3 not sun.
+	tm-sun3.h: Define TARGET_SUN3.
+
+	* utils.c: Use CPLUS_MARKER not '$'.
+
+	* cplus-dem.c: Use CPLUS_MARKER not '$'.  If CPLUS_MARKER isn't
+	defined, define it to '$'.
+
+	* arm-opcode.h: New file (same contents as before; it had
+	just been left out of the distribution for a long time).
+
+	* tm-68k.h: Put declaration of ext_format_68881 outside the macros.
+
+	* main.c: New HAVE_SIGSETMASK #ifdefs.
+
+	* coffread.c (read_coff_symtab): Check for "LF%" with all the
+	other L*% things.
+
+	* coffread.c (SDB_TYPE): New macro.
+	various: Use it instead of checking against T_NULL.
+
+	* Makefile.dist (cplus-dem.o): Hack in an #include "param.h"
+	before we compile it.
+	defs.h: Protect against multiple inclusion.
+	param.h: Include defs.h.
+	signame.c: Change #ifdef SYS_SIGLIST_MISSING to #if.
+	param-no-tm.h: Define SYS_SIGLIST_MISSING from USG.
+
+Thu Apr 18 19:49:10 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* i386-pinsn.c (OP_E): Change %d to 0x%x for consistency.
+
+	* putenv.c: New file
+	Makefile.dist: Add it to $(OBS).
+
+	* mipsread.c [!CMUCS]: #include <syms.h>.
+
+	* mips-xdep.c (fetch_core_registers): #if 0 out the whole function.
+
+	* Move read_memory_nobpt from mem-break.c to breakpoint.c.
+
+Mon Apr 15 21:45:35 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* utils.c (_initialize_utils): Rename "set demangle" to
+	"set print demangle", "set asm-demangle" to "set print
+	asm-demangle" and "set sevenbit-strings" to "set print
+	sevenbit-strings".
+
+	* main.c (initialize_main): Rename "set history write" to
+	"set history save".
+
+	* main.c (initialize_main): Rename "set caution" to
+	"set confirm".
+
+	* values.c (_initialize_values): Remove "info history" alias
+	for (what is now) "show values".
+
+	* infcmd.c, gdbcmd.h: Add unsetlist.
+	infcmd.c: Add unset_command.
+	(_initialize_infcmd): Add "unset" and use it for "unset env".
+
+	* breakpoint.c (_initialize_breakpoint): Remove "unset".
+
+	* valprint.c: Add "set/show print", {set,show}_print.
+	Rename "set addressprint" to "set print address".
+	Rename "set arrayprint" to "set print array".
+	Rename "set array-max" to "set print elements".
+	Rename "set prettyprint" to "set print pretty".
+	Rename "set unionprint" to "set print union".
+	Rename "set vtblprint" to "set print vtbl".
+
+	* main.c: Rename version_info to show_version.
+	(_initialize_main): Rename "info version" to "show version".
+
+	* values.c: Rename value_history_info to show_values.
+	(_initialize_values): Rename "info values" to "show values".
+
+Sun Apr 14 23:08:34 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* inftarg.c (child_open), remote-vx{,.68}.c (vx_proc_open):
+	New function to give correct error message.
+
+Thu Apr 11 17:19:41 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* target.h: Add to_doc and target_preopen.
+	target.c: Add target_preopen and target_command.
+	Remove target_info.
+	(add_target): Call add_cmd and mess with targetlist->doc.
+	core.c, exec.c, remote-eb.c, remote-nindy.c, remote-vx.c,
+	remote-vx.68.c, inftarg.c, remote.c: Add doc field to target struct.
+	Call target_preopen from open routine.
+
+	* main.c: Rename editing_info to show_commands.
+	(_initialize_main): Rename "info editing" to "show commands".
+
+	* source.c: Rename directories_info to show_directories.
+	(_initialize_values): Rename "info directories" to "show directories".
+
+	* values.c: Rename convenience_info to show_convenience.
+	(_initialize_values): Rename "info convenience" to "show convenience".
+
+	* copying.awk (_initialize_copying): Rename "info copying" to
+	"show copying" and "info warranty" to "show warranty".
+	Rename {copying,warranty}_info to show_{copying,warranty}.
+
+	* symfile.c: Rename add_syms_command to add_symbol_file_command.
+	(_initialize_symfile, add_syms_addr_command):
+	Rename add-syms to add-symbol-file.
+
+Thu Apr 18 18:08:30 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* symfile.h (free_named_symtabs):  Rename from free_named_symtab.
+	* symfile.c (clear_symtab_users_once, cashier_psymtab,
+	free_named_symtabs):  Move these routines from symmisc.c.
+	* symmisc.c (same):  same.
+	(free_symtab):  Make non-static.
+	* symtab.h (free_symtab):  Declare as exported void fn now.
+	* dbxread.c (end_symtab, end_psymtab):  Change comments.
+	(initialize_dbxread):  Call dbx_new_init() in case the first
+	command is add-symbols.
+	* target.c (dummy_target):  Permit add_syms_addr_command.
+
+Sat Apr 13 14:46:07 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Permit symbols to be superseded when new symbol files have
+	been read in, particularly for VxWorks.
+
+	* dbxread.c (read_dbx_symtab): Allow N_SOL to cleanly take us back
+	to the main file, as well as to include files.  Also, put global
+	functions into the global psymtab, to make "i fun" work.
+	(end_psymtab):  Free named symtabs and psymtabs for a file, once a
+	new psymtab for it has been read.
+	* coffread.c (end_psymtab):  Free named symtabs and psymtabs for
+	a file, once a new symtab has been read for it.
+	* mipsread.c:  FIXME.  We need to do the same for MIPS, but it
+	looks harder to determine the top-level block before it's been
+	queued to the psymtab list.	
+
+	* symfile.c (symbol_file_add):  Use filtered printing and wrap it.
+	If we have wiped out any old symbol tables, clean up at end of
+	symbol reading.
+	(symbol_file_command):  Don't reference symfile_fns if it's zero.
+
+	* symtab.h (GLOBAL_BLOCK, STATIC_BLOCK, FIRST_LOCAL_BLOCK):  New
+	defines for the blocks of a blockvector that contain global and
+	file-static symbols and the first of the smaller scope contours. 
+	* symtab.c (lookup_symbol, find_pc_symtab, find_pc_line,
+	decode_line_1, make_symbol_completion_list):  Use the above.
+	* coffread.c (end_symtab, patch_opaque_types):  Ditto.
+	* dbxread.c (end_symtab):  Ditto.
+	* expread.y (block):  Ditto.
+	* mipsread.c (throughout):  Ditto.
+	* symmisc.c (free_named_symtabs):  Ditto.
+
+	* symtab.c (list_symbols):  Process the first symbol of the
+	static psymbols list.
+	(types_info):  Restore this function from its untimely #if 0.
+	It's not perfect, but it is better than nothing.
+	(_initialize_symtab):  Restore "info types".
+
+Thu Apr 11 05:23:19 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* m68k-stub.c:  Remote stub for 680x0's, created from
+	rem-m68k.shar (which is removed).
+	* nindy-share/{Makefile,Onindy.c,blout.h,env.h,nindy.c,ttyflush.c}:
+	Remove RCS log stuff now that we use CVS and it blows our diffs.
+
+Wed Apr 10 14:18:06 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* symmisc.c (free_named_symtab):  Make it work, in its current
+	kludgy fashion.  Change result to indicate if we blew away bkpts.
+	* dbxread.c (end_symtab):  Accumulate result from
+	free_named_symtab and print warning if we blew user's state.
+	* symfile.h:  free_named_symtab now returns an int.
+
+Mon Apr  8 23:57:43 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* dbxread.c (dbx_symfile_read):  Initialize psymbol list if this
+	is the first symbol read, even if not mainline.
+	(dbx_psymtab_to_symtab):  symfile might be zero, cope.
+	* exec.c (exec_ops):  Add_syms_addr is valid in our tvec.
+	(set_section_command):  New command ("section xxx yyy" -- should
+	be renamed to "set section xxx yyy" FIXME) which sets the
+	base address of a section of the exec file, overriding the
+	virtual address that BFD reports.
+
+Fri Apr  5 17:14:39 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* exec.c:  Add add_syms_addr_command to exec_ops, so you can
+	load symbols at any address while examining an exec file.
+
+Thu Apr  4 10:09:35 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* tm-i386v.h (FLOAT_INFO):  Don't define it, since the code
+	for printing the float info is host-dependent, not
+	target-dependent.  FIXME.
+	* i386-pinsn.c:  Move #includes to top, remove useless ones.
+	* i386-tdep.c:  Don't bother including <.../reg.h> since we
+	don't use it (and it doesn't exist on host systems).
+
+	* ieee-float.c (ieee_extended_to_double):  Convert NaN to Inf.
+	Convert negative numbers properly.
+	(ieee_test):  Make numbers really random; fix format arg.
+
+	* infcmd.c (attach_command, detach_command):  Don't repeat on CR.
+	* core.c (core_detach):  Unpush core_ops, which might not be on
+	top.  We used to just pop the top, which broke things.  Don't
+	need dont_repeat() any more.
+	(core_file_command):  Psst!  Don't repeat it.
+	* remote-nindy.c (nindy_detach):  Don't need dont_repeat() now.
+	* expprint.c (print_subexp):  Avoid switch fallthru on
+	BINOP_ASSIGN_MODIFY, so we can print += and such.
+	* frame.h:  Fix typo.
+	* inflow.c (kill_command):  After killing inferior, print our
+	current frame in the core file, if we have one.
+	(generic_mourn_inferior):  When inferior dies, either select
+	the current frame (in the new target, e.g. core file), or 
+	set both the current and selected frames to NULL.
+
+	Changes from Peter Schauer.
+
+	* infptrace.c:  Avoid <sys/ptrace.h> on USG.
+
+	* Make all file names fit in 14 characters (sigh and damn!):
+	mv hp300hpux-xdep.c hp300ux-xdep.c
+	mv symmetry-xdep.c symm-xdep.c
+	mv symmetry-tdep.c symm-tdep.c
+	mv convex-opcode.h convx-opcode.h
+	mv tm-vxworks960.h tm-vx960.h
+	mv tm-vxworks68.h tm-vx68.h
+	mv Makefile.srcdir Makefile.sdir
+	mv gdb-int.texinfo gdbint.texinfo
+	mv remote-sa.m68k.shar rem-m68k.shar
+	mv remote-multi.shar rem-multi.shar
+	* Makefile.dist, README, config.gdb, convex-pinsn.c,
+	tconfig/symmetry, tconfig/vxworks960, tconfig/vxworks68,
+	xconfig/hp300hpux, xconfig/symmetry:  Change names to shorter
+	names.
+
+	* command.c (user_info_1, user_info):  New command for listing
+	the user-defined commands.
+
+Wed Apr  3 15:00:26 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* dbxread.c (really_free_pendings):  Clear file_symbols
+	and global_symbols after freeing them; otherwise, running
+	this function twice (if it appears twice on the cleanup
+	chain), we try to free things twice.
+
+	* dbxread.c (read_dbx_symtab):  Calculate end_of_text_addr
+	based on text_addr (the address of text in core), not on addr (the
+	offset between text in the .o file and in core).  This change
+	is from Peter Schauer.
+
+	* main.c:  Define ALL_CLEANUPS as a cast of zero.
+	(return_to_top_level):  Use it.
+	(main):  Do all cleanups after each command run as part
+	of the gdb startup sequence.  Also do all cleanups before
+	entering the command loop, and every time we exit the command
+	loop and reenter.  Before, the cleanups from the startup sequence
+	were being left undone until the first error!
+	(command_loop):  Rename do_nothing cleanup to command_loop_marker
+	so we can see it easily when examining the cleanup chain.
+	(init_signals):  Add another do_nothing for signal handling.
+	(quit_command):  Only try to kill target if it has execution.
+	Problems in the target stack got us into a state where
+	inferior_pid was nonzero but none of the targets had execution.
+	In this state you couldn't exit gdb.
+
+	* dbxread.c:  Two changes from Peter Schauer.
+	(echo_command):  Fflush output after an echo command.
+	(show_history):  Pass all args to cmd_show_list.
+
+	* utils.c (init_malloc):  Call mtrace to turn on tracing
+	if the environment variable MALLOC_TRACE is set to a file name.
+	* mtrace.c:  Add source file which provides a log of every malloc,
+	free, and realloc to a trace file.
+	* mtrace.awk:  Add source file which analyzes the trace file.
+	* Makefile.dist (GNU_MALLOC, MALLOCSRC):  Add mtrace.{c,o,awk}.
+	(VERSION):  Roll to 3.94.3.
+
+	* breakpoint.c (breakpoint_1):  Add a space to "i watch" output.
+	(check_duplicates):  Don't bother with watchpoints.
+	(set_raw_breakpoint):  Comment about danger of this routine.
+	(watch_command):  Parse and eval all args before calling
+	set_raw_breakpoint.
+
+	* solib.c (find_solib):  Avoid error in referencing memory to
+	see if any more shared libraries have been added.  This is
+	particularly useful if the target has terminated.  Bug reported
+	by Peter Schauer.
+
+	Changes from Peter Schauer <pesrem@regent.e-technik.tu-muenchen.de>
+	in bringing up 3.94.2 on the Sun-3.
+
+        * Makefile.dist:  Include CFLAGS in rule for cplus-dem.o.
+        * breakpoint.c (enable_breakpoint):  Check for valid watchpoint
+        expression (in scope) before reenabling watchpoint.
+	* signame.c (init_sigs):  Add missing declaration of i, fix
+	sys_siglist declaration.
+	* source.c (list_command):  Fixed range computation to use
+	lines_to_list ().
+	* stack.c (backtrace_command):  Do not allow command if target has
+	no stack, print informative error message.
+	* target.c (target_command):  Do not write into command line
+	because this fails if the target command is used in a user defined
+	command.  [This change was enhanced by gnu to support any-
+	unique-prefix matching on target names.]
+	* valops.c (value_struct_elt):  Avoid infinite loop on an
+	erroneous attempt to print the member of function (try p main.p).
+
+Mon Apr  1 17:05:45 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* expread.y (name_no_typename):  Avoid reduce/reduce errors
+	caused by ambiguity in handling NAME_OR_INT and NAME_OR_UINT.
+	Since the GDB parser really doesn't use name_no_typename in a
+	name-only context, the parser can't tell the diff between
+	names and numbers here.  Avoid allowing a name_no_typename
+	to be a NAME_OR_*INT to resolve the conflict.
+
+Sun Mar 31 20:12:07 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Bugfixes from Mark Fox (markf@wrs.com) (test=testField.c):
+
+	* valprint.c (val_print_fields):  bitfield printing didn't handle
+	byte order.  Indirect through a few more fns to cope.
+
+	* values.c (modify_field):  also cope with byte order.
+
+Sat Mar 23 10:02:21 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Cleanup for release 3.94.2:
+
+	* Makefile.dist: Pull REMOTE_OBS.  Fix saber includes for BFD
+	include files.  Roll version to 3.94.2.
+	
+	* coffread.c (init_stringtab):  Read length into unsigned char
+	array before swapping; don't assume 32-bit longs.
+
+	* target.c (target_info): Don't bother with get_sym_file, just use
+	the symfile global variable.
+	* symtab.h, symfile.c (get_sym_file):  Delete it.
+
+	* dbxread.c (dbx_symfile_init):  Don't depend on long == 4 bytes.
+	(define_symbol):  Set symbol line number to 0 if not gcc-compiled.
+	(read_type):  Replace one more error() with complain().
+
+	* mipsread.c (parse_partial_symbols):  Replace printf with complain.
+
+	* i960-tdep.c:  Fix copyright attribution.
+
+	* config.gdb:  Quote all backquotes in doublequotes.  You can
+	quote me on that.  BSD 4.4 shell found this one.
+
+	* infptrace.c (throughout):  The third argument to ptrace is an
+	int *, not an int.
+
+	* infrun.c (wait_for_inferior):  When program has terminated, we
+	have to call target_terminal_ours before we pop that target off
+	the stack (e.g. before a call to target_kill or
+	target_mourn_inferior).  This fixes problem where a program
+	terminates, then GDB stops for (tty output) and you have to type
+	"fg" to the shell to resume it.  FIXME:  This code for what to
+	do after termination really should be in normal_stop instead.
+
+	* gdbcore.h (read_memory_check):  Change declaration; it changed
+	names months ago.
+
+	* terminal.h:  Include <sgtty.h> before <sys/ioctl.h>, since in BSD
+	4.4 prereleases, this avoids a bug in their sgtty compatability
+	support.
+	* remote.c:  Use terminal.h rather than hand-rolling the same.
+
+	* signame.c, signame.h (psignal):  Arg is unsigned, not int.
+	* utils.c (strsave, strstr):  Fix arg types.
+	* valprint.c (val_print):  lint
+
+	MIPS symbol table support from Per Bothner:
+
+	* symfile.c (symtab_fns):  Remove initializer table that needs to
+	be hacked for each new symbol file format supported.
+	(add_symtab_fns):  New function, chains symbol table
+	handlers into the global list.
+	(symfile_init):  Search this list.
+	* symfile.h:  Add next pointer, declare add_symtab_fns.
+	* coffread.c (_initialize_coffread): Call add_symtab_fns.
+	* dbxread.c (_initialize_dbxread):  Call add_symtab_fns.
+
+	* mipsread.c (psymtab_to_symtab_1): return void instead of (struct
+	symbol *).  Thus, we no longer need the hack to trash
+	pst->filename.  Good, since that hack confused code in symfile.c!
+
+	(reorder_symtabs, destroy_all_symtabs):  Removed static
+	all_symtabs, which was used to qsort symtabs in reorder_symtabs.
+	Instead, the latter now uses a temporary array (stack-allocated
+	from an obstack, and then freed).
+
+	(parse_symbol):  Added a hack to fix up BLOCK_{START,END} if they
+	haven't been set in the outermost stBlock of a procedure. This was
+	a problem with f77 binaries on Ultrix 4.?.
+
+	(new_symtab, new_symbol, new_type):  Continue changing code to use
+	obstacks more and otherwise conform to dbxread internal style.
+	Made the free_code of symtabs be free_linetable (as in dbxread)
+	instead of free_contents.  This implies memory leaks when reading
+	a new symbol table, until the conversion is finished. Did change
+	(struct symbol) and (struct type) to be allocated on the
+	symbol_obstack.  Blocks and blockvectors are among the things
+	still "leaking."
+
+	* mipsread.c (parse_partial_symbols, parse_fdr):  It hasn't been
+	tested much, but it solved one problem (reported by Meissner), and
+	cleans up some other things.  The problem happened when an
+	included file contains actual code (functions) and not just
+	definitions. The mips coff is a little inconvenient there, since
+	it may cause a procedure to be mapped to the wrong psymtab.
+
+	* mips-tdep.c (heuristic_proc_desc):  Minor cleanup.
+	* mips-xdep.c (fetch_core_registers):  Minor cleanup.  FIXME,
+	this will need work for the new core paradigm.
+
+	Opcode patches from the net:
+
+	* mips-opcode.h: fix incorrect disassembly of the mfc1, cfc1, and
+	ctc1 instructions. Also, the cvt.d.w and cvt.s.w instructions were
+	missing altogether - they are added here.  From Bruce Bauman.
+	* mips-opcode.h:  The low mask for C0 instructions was too small.
+	From Garrett Lau.  I modified the fix to check the entire 32-bit
+	opcode.
+
+	* ns32k-opcode.h:  Fix opcodes for deiw and deid.  From Bruce
+	Bauman.
+
+Thu Mar 21 12:56:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Roll in changes from Per Bothner (Tue, 25 Sep 90 11:11:04):
+
+	* dbxread.c (read_type): Pointer subtraction (value_sub in
+	valarith.c) sometimes failed because the types of the
+	 pointers being subtracted were not identical.
+	These differed because dbxread.c was allocating pointer types
+	using dbx_alloc_type+smash_to_pointer_type instead of
+	lookup_pointer_type. I failed to find a justification for the
+	former, so I changed it to use the latter. Similarly, I
+	replaced smash_to_function_type by lookup_function_type,
+	and smash_to_reference_type by lookup_reference_type.
+
+	* mipsread.c (parse_symbol, upgrade_type, parse_procedure, 
+	_initialize_mipsread):  corresponding changes.
+
+	* symtab.c (smash_to_{pointer,reference,function}_type): eliminate.
+
+	* source.c (mod_path): Do tilde_expand on each component of the path,
+	rather than on the (list of) paths as a whole.
+	(print_source_lines):  Set first_line_listed in addition to
+	current_source_symtab and current_source_line.  If the source was
+	not findable, after a "dir" command to fix the problem,
+	a "list" would get the wrong lines.
+
+	While I was there... (gnu):
+
+	* dbxread.c (read_type):  Change error to complaint.
+
+Thu Mar 21 12:56:46 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	First attempt at detailed understanding of symbol table memory alloc.
+
+	* dbxread.c (dbx_symfile_read):  Free our string table if we
+	aren't the mainline.  Free the "info" struct since we're done with
+	it. 
+	(init_psymbol_list):  Free any previously allocated psymbol lists.
+	(): FIXME: Should realloc-down the psymbol lists when done reading
+	the main symbol file?
+
+	* symmisc.c (free_symtab):  Free fullname field too.
+
+	* xm-hp300hpux.h (USG):  #undef then #define so Makefile can -D.
+	(REGISTER_ADDR):  Make result type unsigned int.
+
+	* xconfig/{i386*,hp300hpux,altosgas,altos}:  All config files that
+	define REGEX must also define REGEX1 (its dependency).
+
+Tue Mar 19 21:28:57 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* tconfig/i960:  No longer works, points you at vxworks960 or
+	nindy960.
+
+	* xgdb.c, XGDB-README:  Remove file.  Users can get the much
+	better xxgdb.
+	* Makefile.dist:  Remove all trace of xgdb.
+
+	* breakpoint.c (breakpoint_1):  Pass demangle arg to
+	print_address_symbolic.
+	(clear_breakpoints):  Remove unused function.
+	(breakpoint_re_set_one):  Guts of breakpoint_re_set.
+	(breakpoint_re_set):  Use catch_errors to do them all anyway.
+
+	* gdb-int.texinfo (Host versus Target):  Add section on what is
+	a "host" feature versus what is a "target" feature.
+
+	* infcmd.c (path_command, path_info):  Handle the PATH variable
+	(object search path) as conveniently as the source search path.
+	* environ.c (set_in_environ):  Set some vars in GDB's environment,
+	in addition to the child's.  PATH, G960BASE, G960BIN for starters.
+	* source.c (mod_path):  New function, from guts of
+	directory_command, modifies a path.  Used by path_command.
+	(directory_command):  Call it.
+	* defs.h (strsave):  Declare.
+
+	* utils.c (sevenbit_strings):  Add new printing option.
+	(printchar):  Use it.
+	(strsave):  Provide this handy helper routine.
+	(set_width_command):  Rename set_screen_width_command.
+	(_initialize_utils):  "set screen-width" => "set width";
+	"set screen-height" => "set height"; add sevenbit-strings.
+
+	* infcmd.c (do_registers_info):  Print floating point registers
+	in raw hex as well as float format, regardless of whether it is
+	a "virtual" convertible register.
+	* tm-sparc.h (PRINT_REGISTER_HOOK):  Print every pair of float
+	regs as a double, just in case it's being used that way.	
+	* values.c (unpack_long):  Comment on array/function coercion.
+	(unpack_double):  Argument is in target byte order now.  For
+	integer arguments, just call unpack_long and float the result.
+	* m68k-tdep.c: include defs.h for "const" handling.
+	* remote-nindy.c:  Use ieee-float stuff.
+	(nindy_fetch_registers):  Unpack double regs to host double, then
+	to extended.
+	(nindy_store_registers):  Pack extendeds to host double, flip
+	around by misusing unpack_double, send as target double.
+
+	* tm-vxworks68.h (FRAME_CHAIN):  Handle current frame pointer of
+	zero, as when stopped at the first instruction of a process.
+
+	* blockframe.c:  Fix filename in comment (param.h => tm.h).
+	* sparc-tdep.c (skip_prologue):  More explicit nudging comments.
+	* tm-68k.h:  Fix typos.
+
+Fri Mar 15 01:09:34 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Changes from a bringup on the DEC Vax under Ultrix 4.0.
+
+	* coredep.c (fetch_core_registers):  Pass end-address of register
+	section to register_addr as expected.  Don't call supply_register
+	if we'd just pass it garbage.
+
+	* dbxread.c (read_dbx_symtab):  Skip N_NSYMS on Ultrix.
+
+	* exec.c (xfer_memory):  Use boolean xfer_fn result, not int.
+
+	* target.c (push_target, target_info):  Cast enums to int for < or
+	> comparison.
+
+	* stack.c (print_frame_info):  Identify source file & line
+	even if we can't print it.
+
+	* xm-vax.h (MISSING_VPRINTF):  No longer missing in Ultrix V4.0.
+
+Sat Mar  9 10:08:20 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Clean up IEEE floating point support.
+
+	* ieee-float.h:  New file.
+	* ieee-float.c:  Write real routines to convert between host
+	doubles and various target IEEE extendeds.
+	* m68k-xdep.c:  Eliminate assembler code for extended floats.
+	* xconfig/{3b1,altos,altosgas,hp300bsd,isi,news,news1000,sun2os3,
+	sun2os4,sun3,sun3os3,sun3os4}:  Eliminate use of m68k-xdep.o.
+	* tm-i960.h, tm-68k.h (REGISTER_CONVERT_TO_VIRTUAL,
+	REGISTER_CONVERT_TO_RAW):  Use ieee_extended_to_double and
+	double_to_ieee_extended.
+	* i960-tdep.c:  Define ext_format_i960.
+	* m68k-tdep.c:  Define ext_format_68881.
+	* sparc-tdep.c:  Define ext_format_sparc, though unused.
+	* Makefile.dist (HFILES):  Add ieee-float.h.
+	* inftarg.c: #include "ieee-float.h" for the REGISTER_CONVERT
+	macros.
+
+	Obsolete the "coffstrip" program in favor of using BFD's strip.
+
+	* nindy-share/coffstrip.c:  Remove file.
+	* nindy-share/nindy.c (coffstrip):  Routine to run bfd_strip.
+	* Makefile.dist:  Remove references to nindy-share/coffstrip.c.
+	* tconfig/nindy960:  Remove reference to coffstrip.o.
+
+	* Makefile.dist:  Roll version number to 3.94.1 (not yet final).
+
+Wed Mar  6 09:56:45 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* symfile.h:  Add symfile_bfd, common between dbxread and coffread.
+	* dbxread.c:  Remove static symfile_bfd.
+	* infcmd.c (do_registers_info):  Add PRINT_REGISTER_HOOK, though
+	it is not used yet.
+	* inftarg.c (child_detach):  Pop the child_ops vector if the
+	detach is successful.
+	* remote-nindy.c (nindy_create_inferior):  Don't push a new
+	nindy_ops since nindy uses the same one for execution and memory
+	examination anyway.
+	* core.c (core_ops):  Use child_attach and child_create_inferior
+	rather than default attach and create_inferior functions.
+
+	Handle floating point registers in core files.
+
+	* sparc-xdep.c (fetch_core_registers):  Rewrite for float support.
+	* sun3-xdep.c (fetch_core_registers):  Rewrite for float support.
+	This version untested since BFD doesn't yet support sun3 core
+	files.
+	* hp300hpux-xdep.c:  Rewrite fetch_core_registers to new calling
+	conventions.  Fix comments and style.  This version has not
+	been compiled yet, since we have no HP inhouse.
+	* core.c (get_core_registers):  Look for two sections, ".reg"
+	and ".reg2", and pass both to fetch_core_registers sequentially.
+
+	Revise directory path yet again.
+
+	* source.c (forget_cached_source_info):  Not static any more.
+	(init_source_path):  New default source path is "$cdir:$cwd".
+	(dir_command):  Handle variable arguments ($cdir, $cwd).
+	(source_info):  Print "Compilation directory" rather than
+	"Originally compiled in" to remind people of $cdir.
+	(openp):  If the path contains $cwd, use current directory.
+	(open_source_file):  If compilation directory is known, replace
+	first $cdir in path with the compilation directory.
+	(print_source_lines):  Even if we can't print the lines, set the
+	current symtab and line for future commands like "info source" or
+	"breakpoint".  Also, error message now contains the file name,
+	line number, and file access error message.
+	(_initialize_source):  Fix help text to describe changes.
+	* main.c (cd_command):  Forget cached source info when we chdir.
+	* utils.c (strstr):  Add simple implementation.
+
+Tue Mar  5 01:41:40 1991  John Gilmore  (gnu at fowanton.cygnus.com)
+
+	* coffread.c (read_one_sym, init_linetable, init_stringtab):
+	Byte-swap COFF symbol tables if necessary when reading them in.
+	Use complain() to replace error message in one spot.  Needs
+	corresponding change in bfd/coff-code.h to make some symbol
+	swapping routines non-static.
+
+Mon Mar  4 00:53:40 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Merge changes from Eirik Fuller, for UTek.
+
+	* defs.h (errno):  Add declaration.
+	* altos-xdep.c, arm-xdep.c, convex-xdep.c, gould-xdep.c,
+	hp300hpux-xdep.c, infrun.c, inflow.c, infptrace.c, i386-tdep.c,
+	i386-xdep.c, pyr-xdep.c, mips-xdep.c, remote-eb.c, remote-nindy.c,
+	remote-vx.c, source.c, standalone.c, stuff.c, sun386-xdep.c,
+	symmetry-tdep.c, symmetry-xdep.c, umax-xdep.c, utils.c:  Eliminate
+	declarations of errno.
+
+	* remote-eb.c:  Define B19200 and B38400 as EXTA and EXTB.
+
+	* remote-vx.c:  Include <sys/time.h> for UTek; Sun gets it via
+	<rpc/rpc.h> and <rpc/types.h>.
+
+Sat Mar  2 15:47:55 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* i960-tdep.c (examine_prologue):  Add new argument limit,
+	which stops the scan at the end of the prologue, or at the PC.
+	This fixes a problem where it walks down into the code for the
+	user's statements if that code looks like function prologues.
+	Mark Fox and I have been bouncing this code back and forth, making
+	small changes to it.  Callers changed to match.
+
+Tue Feb 26 01:47:07 1991  Cygnus John Gilmore  (cygnus at yuba)
+
+	Cleanup for gdb-3.94 release final:
+
+	* Makefile.dist:  Remove remote-vx.c, remote-nindy.c, and all
+	the .c files from vx-share and nindy-share, from the various 
+	macros, since they are not found via ALLDEPFILES.
+	(SFILES):  Add tm-i960.h.
+	(alldeps.mak rule):  Break out ALLDEPFILES_MAINDIR and
+	ALLDEPFILES_SUBDIR.  List all the nindy and vxworks subdir files
+	in the SUBDIR list.
+	(TAGFILES_MAINDIR):  Change ALLDEPFILES to ALLDEPFILES_MAINDIR.
+	(gdb.tar.Z):  Use ALLDEPFILES_SUBDIR as well as SFILES_SUBDIR.
+
+Mon Feb 25 16:02:35 1991  Cygnus John Gilmore  (cygnus at oldman)
+
+	* am29k-tdep.c:  Add contribution line.
+	(examine_prologue):  Cache information about function prologues in
+	the misc-function-vector to avoid lots of references over the
+	serial line while examining instructions.
+
+	* core.c (core_close):  New function made from cleanup_core.
+
+	* core.c, exec.c, inftarg.c, remote-eb.c, remote-nindy.c,
+	remote-vx.c, remote.c, target.c, target.h, 
+	Update target_ops vector to add attach, close, and load entries.
+	Use add_syms_addr_command, not add_file_addr_command, for
+	add_file.  Break out close routine from existing code.
+
+	* dbxread.c (really_free_pendings):  Don't free pending_blocks;
+	they are in an obstack.
+	(read_dbx_symtab):  Relocate end_of_text_addr in the psymtab.
+	Lint.
+	(define_symbol):  Add symbol type parameter; change callers;
+	pass type parameter to DBX_PARM_SYMBOL_CLASS macro to allow
+	it to influence the symbol class on the i960.
+	(define_symbol):  Swap LOC_CONST's into target byte order.
+
+	* exec.c (exec_close):  New function.
+	(exec_file_command):  Call it.
+
+	* findvar.c (read_relative_register_raw_bytes):  Doc byte order,
+	Fix byte order of frame pointer.
+	(read_var_value):  Result of 0 if var's value can't be found,
+	e.g. missing FRAME_ARGS_ADDRESS.  Byte-swap LOC_CONST and
+	LOC_LABEL values to target order.  Add LOC_LOCAL_ARG.
+	(locate_var_value):  Use read_var_value and use its lazy address
+	as the location of the var's value.  Lint.
+
+	* i960-pinsn.c (next_insn):  Add routine from vxgdb for scanning
+	instructions.       
+
+	* i960-tdep.c (arg_address, i960_frame_find_saved_regs):  Remove
+	obsolete Intel versions in favor of vxgdb versions.
+	(check_host, byteswap, byteswap_val, reorder_val):  Eliminate
+	code dealing with byte order of values, which Intel did in host byte
+	order rather than gdb-4's target byte order.
+	(i960_frame_chain_valid):  Move to nindy-tdep.c.
+	(examine_prologue, skip_prologue, frame_find_saved_regs,
+	frame_args_address, leafproc_return, saved_pc_after_call,
+	pop_frame):  Add vxgdb versions from Mark Fox.
+	(examine_prologue, frame_struct_result_address):  Add code
+	to deal with the saved value of G13 (struct return address
+	pointer).
+	(frame_args_address):  Modify Mark's version to prefer the
+	saved value over the current value in the topmost frame.
+	Cache result in the frame info to avoid performance hair in
+	callers.
+	(print_fault):  Add gdb960 code for printing faults.
+	(_initialize_i960):  Actually call check_host.
+
+	* ieee-float.c (ieee_extended_to_double, ieee_double_to_extended):
+	add stub routines.  FIXME, these currently just return zero!
+
+	* infcmd.c (program_info):  Use PRINT_RANDOM_SIGNAL.
+	(attach_command):  Call target_attach, not target_open, now.
+
+	* infrun.c (normal_stop):  Make global, not static, for vx_attach.
+	(child_attach):  Rename from child_open.
+	(wait_for_inferior): Use PRINT_RANDOM_SIGNAL.  If stop_pc is zero,
+	don't confuse it with a zero step_resume_break_address. 
+
+	* inftarg.c (child_detach):  Eliminate inferior_pid test.
+	(child_files_info):  Clean up message a bit.
+	(child_ops):  Use child_attach, not child_open, to attach.
+
+	* mem-break.c:  #ifdef out the whole file if BREAKPOINT is not
+	set (e.g. on VxWorks or NINDY).  Move read_memory_nobpt from
+	findvar.c to here, since it depends on the contents of the
+	shadow_contents of breakpoints, but keep if #if 0 since it is
+	never called.
+
+	* nindy-tdep.c:  New file, contains nindy_frame_chain_valid, moved
+	from i960-tdep.c.
+
+	* printcmd.c (address_info):  Handle LOC_LOCAL_ARG.  Lint.
+	(ptype_command, display_command):  Eliminate have_inferior_p and
+	have_core_file_p in favor of target_has_stack or
+	target_has_execution.
+	(print_frame_args):  Handle LOC_LOCAL_ARG.  Eliminate duplicate
+	code for actually finding the values of arguments, though we still
+	keep track of the maximum stack offset for use in printing unnamed
+	arguments.  Handle missing FRAME_ARGS_ADDRESS.
+
+	* remote-nindy.c (i960_print_fault):  Move to i960-tdep.c.
+	(struct nindy_regs):  Define registers passed to/from nindy.
+	(nindy_fetch_registers, nindy_store-registers):  Translate between
+	nindy and GDB formats for the registers.
+	(dcache_init):  Statically allocate the cache, since it was being
+	allocated by a malloc that was never freed anyway.
+	(nindy_create_inferior):  Error, not core dump, if no exec file.
+	(nindy_before_main_loop):  Use target_load, not target_add_file.
+
+	* remote-vx.c (net_load):  Specify large timeout for load
+	requests.  Allow user to break out with INTERRUPT.
+	(net_break):  Remove useless code, clean up.  Change callers.
+	(parse-args, skip_white_space, find_white_space):  Clean up arg
+	parsing to cope with quoted strings.
+	(net_wait, net_quit):  Never call error, just return status.
+	(vx_read_register, vx_write_register):  Cleanup status checking.
+	#ifdef the code based on which CPU we are using (960 or 68k),
+	FIXME, this should be completely general but it isn't yet.
+	(vx_xfer_memory, vx_resume):  Cleanup status checking.
+	(vx_run_files_info):  Improve message.
+	(vx_load_command):  Renamed from vx_add_file_command.  Allow load
+	to be interrupted.
+	(net_ptrace):  Remove unused routine.
+	(vx_wait):  Adopt code from vxgdb960 to cope with broken
+	connections to target machine and prompt to disconnect.  Remove
+	debug printouts.  Map some EVENT_'s to SIGnals.
+	(add_symbol_stub, vx_open):  Print names of object files we found,
+	and "ok" if we read their symbols OK.  Clarify output in general.
+	(vx_attach, vx_detach, vx_kill):  Add these commands.
+	(vx_convert_from_virtual, vx_convert_to_virtual):  Simplify.
+	(vx_run_ops):  Turn off all_mem, to avoid spurious msg in the
+	"info files" output, and create_inferior, since we already have
+	an inferior.
+
+	* stack.c (frame_info):  Replace Frame_unknown with 0.
+	(print_frame_arg_vars):  Handle LOC_LOCAL_ARG.
+	(return_command):  Pop until the PC matches as well as the FP,
+	so it works even if the FP is shared with another function,
+	as in "frameless" or "leaf" procedures.
+
+	* symfile.c (load_command):  renamed from add_file_target_command.
+	(add_syms_addr_command):  renamed from add_file_addr_command.
+	(add_syms_command):  Stub to call target_add_syms.
+	(_initialize_symfile):  Change command names and descriptions,
+	add-file => add-syms, and load from alias to its own command.
+
+	* target.c (kill_or_be_killed, maybe_kill_then_attach,
+	maybe_kill_then_create_inferior):  Default for attempts to start
+	a process, if one is already running, is to ask about killing
+	it and retry if yes.
+	(upstack_create_inferior):  #if-0 it, strata obsolete it.
+	(push_target, unpush_target, pop_target):  to_close() a target
+	before unstacking it. 
+	(target_info):  Renamed from target_files_info.
+	(_initialize_targets):  Rename "i files" as "i target", accessible
+	under both names.
+
+	* target.h:  Improve comments about the target_ vectored routines.
+
+	* tm-i960.h:  Remove NINDY-specific stuff to tm-nindy960.h.
+	Convert commenting style to standard GNU style.
+	(DBX_PARM_SYMBOL_CLASS): allow LOC_LOCAL_ARG's to be recognized.
+	(SKIP_PROLOGUE):  No longer a no-op.
+	(SAVED_PC_AFTER_CALL):  Now handles leaf procedures.
+	(*_REGNUM):  Sort register numbers.
+	(REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE,
+	MAX_REGISTER_RAW_SIZE, REGISTER_CONVERTIBLE,
+	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Float regs
+	are now 10 byte extendeds, not 8 byte doubles.
+	(FRAME_CHAIN_VALID):  Make this config-dependent, since it differs
+	for nindy versus vxworks targets.  FIXME, this should possibly go
+	in the target vector.
+	(EXTRA_FRAME_INFO, INIT_EXTRA_FRAME_INFO):  Cache both
+	frame_saved_regs and arg pointer with each frame.
+	(FRAMELESS_FUNCTION_INVOCATION):  New leafproc support.
+	(FRAME_ARGS_ADDRESS):  Use cached result.
+	(FRAME_ARGS_ADDRESS_CORRECT):  New, avoids g14 guessing.
+	(FRAME_FIND_SAVED_REGS):  Change arg to subsidiary fn.
+	(PRINT_RAMDON_SIGNAL):  Call print_fault.
+	(POP_FRAME):  Now works.
+
+	* tm-nindy960.h:  Break this off tm-i960.h.  NINDY-specific
+	option parsing and startup; STACK_END_ADDR, FRAME_CHAIN_VALID,
+	BREAKPOINT, and DECR_PC_AFTER_BREAK are here.
+	(ADDITIONAL_OPTION_HANDLER):  use target_load, not
+	target_add_file.
+	
+	* tm-vxworks960.h:  Break this off tm-i960.h.  VxGDB specific
+	startup; DECR_PC_AFTER_BREAK, and FRAME_CHAIN_VALID are here.
+
+	* valarith.c (value_subscripted_rvalue):  Avoid handling
+	floats and doubles specially; it gave alignment errors.  Lint.
+
+	* valops.c (value_of_variable, value_of_this):  Error if unknown
+	value.
+
+	* valprint.c (print_floating):  Bcopy rather than pointer-deref,
+	to avoid alignment problems.
+	(value_print):  Handle unknown value address.
+	(cplus_val_print):  Two args are ignored; remove them.  Change caller.
+	(val_print):  Use unpack_long rather than pointer-deref.
+
+	* values.c:  Lint.
+	(unpack_long, unpack_double):  Use bcopy rather than pointer-deref
+	to avoid alignment problems.
+	(value_being_returned):  Error if return value unknown.
+	(set_return_value):  Add bogosity warning, FIXME.        *
+
+	* TODO:  A woman's work is never done.
+
+	* Makefile.dist:  Distribute REMOTE_OBS into tconfig files.
+	Separate INCLUDE_CFLAGS for use with lint.  Add LINTFILES.
+	Add ieee-float.o to OBS.
+	* tconfig/{nindy960,vxworks68,vxworks960}:  Include the desired
+	REMOTE_OBS remote-interface files in the TDEPFILES and TM_FILE.
+	* tconfig/i960:  FIXME.  Half-merge, produce warning if config'd.
+
+	Changes to generalize the VxWorks RPC protocol slightly, to handle
+	i960 as well as 68000.
+
+	* vx-share/dbgRpcLib.h (VX_SOURCE_STEP):  Add.
+	* vx-share/reg.h:  Produce i960 regs #ifdef I80960
+	* vx-share/xdr_ptrace.c:  Skip FPA registers if 960.
+	* vx-share/xdr_rdb.h:  Add SOURCE_STEP struct and xdr decl.
+	* vx-share/xdr_rdb.c:  Add xdr_SOURCE_STEP routine.
+	* vx-share/xdr_regs.c:  Add xdr_regs, xdr_fp_status, xdr_ext_fp
+	for i960.  Change xdr_vectors to xdr_opaques for 68k registers,
+	so they will move in target byte order rather than network
+	byte order (happens to be the same).	
+
+Mon Feb 25 03:41:44 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* tm-convex.h (END_OF_TEXT_DEFAULT):  Remove #if 0'd block.
+
+Sun Feb 24 00:55:53 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* am29k-pinsn.c, 
+	Add contribution lines to various files, showing where they
+	came from.
+
+	* breakpoint.c (break_insn, check_break_insn_size,
+	read_memory_nobpt):  Remove to mem-break.c.
+
+	* xm-*.h, param-no-tm.h, tm-29k.h, valprint.c:  Change BYTE_ORDER to
+	HOST_BYTE_ORDER.
+
+	* tm-29k.h (STAB_REG_TO_REGNUM):  Warn user if symbol table
+	entry has bad register number.  This change is not
+	tested in this release, FIXME.
+
+	* frame.h:  Eliminate Frame_unknown in favor of a simple zero.
+	tm-vax.h:  Ditto.
+
+	* value.h:  Force value's contents field to be aligned to hold
+	at least a double or a long long (if supported).  This avoids
+	doing bcopy's in and out of the contents field.
+
+	(step_1):  Avoid coredump under obscure circumstances when we
+	have no frame.
+
+	* symtab.h (misc_info):  Add field to misc function vector for
+	any kind of cached information the target code desires.  AMD
+	29000 uses this to avoid repeating examine_function_prologue's.
+
+	* coffread.c:  Lint.  Remove static symfile, read_section_header.
+	core.c (have_core_file_p):  Lint: remove.
+	expprint.c (print_subexp):  Lint.
+	infptrace.c, valops.c, valprint.c:  lint.
+
+	Roll in changes from vxgdb-5.0.1:
+
+	* symtab.h:  Comment byte order of each address class.  Add
+	LOC_LOCAL_ARG for frame-relative args (960).
+	expread.y:  Use LOC_LOCAL_ARG where LOC_ARG is used.
+	symtab.c, symmisc.c:  ditto.
+	
+	* infrun.c (init_wait_for_inferior):  Clear stop_signal.
+
+	* remote.c (remote_resume):  Error if resume with a signal.
+
+	* symfile.c (prim_record_misc_function):  Clear misc_info.
+	(fill_in_vptr_fieldno):  Check stub type of arg.
+
+	* valops.c (value_cast):  Avoid looking up names of types whose
+	name we don't know, to prevent coredump.  Sun CC produces typedef
+	rtx and the name of *rtx is zero...
+
+Mon Feb 18 21:16:25 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Roll in changes from final AMD 29000 port (Tiemann).
+
+	tconfig/am29k:  Add COFF_ENCAPSULATE and TARGET=TARGET_AM29K
+	for ../include/a.out.encap.h.  This might not work now that BFD
+	is separately compiled.  Instead, BFD support for encap will have
+	to translate machine type 29k into the right COFF_MAGIC.
+	
+	* infcmd.c: Remove references to inferior_pid that aren't used
+	in actual ptrace calls; use target_has_execution, etc.
+	(have_inferior_p):  Remove function.
+	(program_info):  Print target info rather than "process number";
+	avoid gratuitous messages unless from_tty.
+	(run_stack_dummy, finish_command):  Set proceed_to_finish.
+	infrun.c: Remove inferior_pid refs.  Decl & init proceed_to_finish.
+	main.c:  Lint.  Lose have_inferior_p().
+	inferior.h (have_inferior_p):  Remove, lint.
+	(proceed_to_finish):  Add flag to ask that all regs be saved
+	by normal_stop, for the few commands that need it, speeding up
+	serial I/O.  Add comments to stop_registers.
+
+	* remote-eb.c:  Remove newline from breakpoint message we grep
+	for.  Never time out when running the user program.
+	
+
+
+Wed Feb 13 15:34:40 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Roll in changes from vxgdb-5.0.1:
+
+	* dbxread.c (read_dbx_symtab): If we encounter a "FORTRAN COMMON"
+	symbol in its raw form, we are processing an unlinked ".o" file.
+	See if the target environment has assigned it an address, using
+	target_lookup_symbol (VxWorks does), and enter it into the symtab
+	that way.
+
+	* tm-vxworks.h (FRAME_CHAIN, FRAME_CHAIN_VALID):  Override usual
+	68k versions for a simpler version that assumes zero FP at bottom.
+	Fixes bug of truncated stack reports.
+
+	* target.h (target_lookup_symbol):  Define this routine's args
+	and result, finally.
+
+	* target.c (nosymbol):  Default routine for target_lookup_symbol.
+	(target_default):  Default lookup_symbol and call_function too.
+	(files_info):  Only print has_all_memory warning if a non-dummy
+	target follows.
+
+	* remote-vx.c (vx_read_register, vx_convert_to_virtual,
+	vx_convert_from_virtual): If target does not have floating point,
+	zero register "values", and avoid doing cross-net conversions.
+	(vx_lookup_symbol):  Rename net_lookup_symbol, add to vectors.
+	(vx_open):  Rearrange code that attaches to target and reads
+	symbols for all loaded modules, to work if some of the modules
+	are not accessible.  Add symbol_stub() and add_symbol_stub()
+	as callbacks from catch_errors().  Allow connect attempt to be
+	interrupted painlessly with ^C (FIXME, there are still some bugs
+	if the interrupt happens during symbol reading.).  Print
+	final message with puts_filtered, since symbol messages are
+	now filtered too.
+
+	Misc cleanup:
+
+	* main.c (catch_errors):  Only print errstring if non-null.
+	(command_loop):  Avoid an ioctl per command to test ISATTY.
+
+	* remote-vx.c (net_load):  make static; avoid sophomoric msg.
+	(vx_xfer_memory):  Return correct result!
+	(vx_files_info):  Indicate whether target has float or not.
+	(vx_lookup_symbol):  Complain, not error, if target gone.
+	(vx_open):  Print "Connected" msg before disabling immediate-quit.
+	[FIXME:  lookup_symbol and vx_open changes need testing.]
+
+	target.c, remote-eb.c, inftarg.c, am29k-opcode.h, target.h,
+	tm-29k.h, tmm-vxworks68.h, symfile.c, gdb-int.texinfo: Add
+	contributor lines and update copyrights to 1991.
+
+	Changes from an attempted H-PUX host port:
+
+	* infptrace.c (PT_ATTACH, PT_DETACH):  Handle HP/UX, which 
+	defines PT_ATTACH and PT_DETACH but not PT_KILL.
+	* remote-eb.c (eb_open):  Misplaced endif kills sysv H/PUX.
+	* remote-vx.c: include <sys/time.h> for HPUX.
+	* hp300hpux-xdep.c (fetch_core_registers):  Rewrite old
+	"core_file_command" routine to BFD regime.  May not work yet.
+
+	Attempted port of "gdb-3.4 Van Jacobson xgdb" to modern gdb.
+
+	* xgdb.c: Replace X10 version with some VJ version.
+	(FIXME:  Its copyright assignment is not on record.)
+	* xgdb.c:  Update include files to X11R4 (Xaw crud).
+	(xgdb_display_source, create_text_widget): fix call to
+	get_filename_and_charpos.  Rewack source window stuff for X11R4
+	(gleaned from include files, and "nm's" of binary libraries, since
+	I had no doc available).
+	(append_selection, append_selection_word): Disable with FIXME
+	since R4 changed interface here.
+	(create_buttons):  Add back the old set of buttons.
+	(xgdb_create_window):  Fix call to XtInitialize (&argc not argc).
+
+	* Makefile.dist (xgdb, xgdb-init.c):  Update for X11R4 on Suns.
+	Roll VERSION to 3.94 (not yet final though).
+
+Sat Feb  9 09:46:25 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* obstack.h (obstack_ptr_grow, obstack_ptr_grow_fast,
+	obstack_int_grow, obstack_int_grow_fast):  Eliminate
+	cast on left of assignment, which gives MIPS cc fits and is
+	not Standard C.
+
+	* sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
+	F_ALIAS.  Use printf, not fprintf, when not passing a file
+	pointer...
+	(compare_opcodes): Check that identical instructions have
+	identical opcodes, complain otherwise.
+
+	* sparc-opcode.h (st %fsr):  Fix opcode "lose" mask.  This
+	was reported by Roland McGrath.
+	(unimp): Only match if exactly zero instruction.  (Roland)
+	(branches and traps):  Generate all variations of these
+	instructions with macros, based on a single call that defines
+	each condition name and its binary representation.
+	(set):  Turn on alias bit, to avoid test in sparc-pinsn.c.
+
+	* valprint.c (val_print_fields):  Take, and use, format parameter.
+	This means that "p/x struct" again prints the elements in the
+	desired format.  Changed callers.
+
+	* stack.c (frame_info):  Use filtered output, and indicate wrap
+	points.  Remove kludgy formatting designed to avoid line wrap.
+
+	* utils.c (wrap_here):  If the line is already full (because
+	we had printed a long indent or long wrapped string), do an
+	immediate newline-and-indent.
+
+	* m68k-pinsn.c (print_insn_arg): Bugfix from
+	ntmtv!thompson@ames.arc.nasa.gov (Mike Thompson): 'bkpt #0'
+	instruction is incorrectly disassembled as bkpt #8.
+
+	* dbxread.c (end_psymtab): Bugfix from Peter Schauer
+	<pesrem@regent.e-technik.tu-muenchen.de>: If you want to set a
+	breakpoint in a *.y file gdb will say Reading in symbols for *.y...
+	and then will dump core (sometimes). I traced it back to an
+	uninitialized symfile_name in psymtab_to_symtab.
+	(const_vol_complaint):  Add quotes to message.
+	(define_symbol):  Only believe line number if gcc_compiled.
+	Avoid allocating symbol if we will not return it.
+
+	Add target strata support so that newly established targets go
+	into their right place in the target stack (e.g. a new exec file
+	doesn't wipe out the ability to access the running process).
+
+	* target.h, core.c, exec.c, inftarg.c, remote-eb.c,
+	remote-nindy.c, remote-vx.c, remote.c, target.c:  Add to_stratum
+	and initialize it properly in all the targets.
+
+	* target.h:  Document strata.  Change return type of push_target.
+
+	* target.c (nomemory):  new function for dummy memory access.
+	(tcomplain):  Rename complain, now also used in symfile.c.
+	(push_target):  Push targets within strata.  New return value shows
+	whether new target is on top of stack or not.  Always keep dummy
+	target on stack.
+	(target_files_info):  Ignore dummy target.
+
+	* core.c (core_open):  Warn user, and skip accessing file, if the
+	core target is not the topmost target in the stack.
+	* remote-nindy.c (nindy_create_inferior):  Avoid unpush_target, now
+	already handled.
+
+	* remote-vx.c:  Remove vx_prepare_to_store from vxworks memory
+	target_ops, it doesn't belong there since we have no regs there.
+	Change name of target from machine => memory to clarify.
+
+Thu Feb  7 16:32:09 1991  John Gilmore  (gnu at spiff.cygnus.com)
+
+	* Freeze version 3.93 for release.
+
+	* Makefile.dist:  Handle vx-share and nindy-share subdirs
+	properly when building gdb.tar.Z.
+
+	* symtab.c:  lint; add no_symtab_msg to consolidate the messages
+	printed in various places, so I could change just one copy.
+
+	* dbxread.c, coffread.c:  Change references to bfd->iostream
+	to cast to FILE *, now that BFD avoids needing types defined
+	in other header files.
+
+Tue Feb  5 21:39:35 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* command.c, dbxread.c, expprint.c, infcmd.c, infptrace.c,
+	infrun.c, printcmd.c, remote-nindy.c, source.c, sparc-tdep.c,
+	sparc-xdep.c, symfile.h, symmisc.c, utils.c, valprint.c: Lint
+	(actually gcc -Wall).
+
+	* dbxread.c:  Remove first_global_sym, last_global_sym, since
+	they are never referenced.
+
+	* defs.h (baud_rate):  Declare.
+	main.c: Define it, and add the -b option to set it.
+
+	* gdb-int.texinfo:  Add text on how to define a new host or target
+	architecture, prompted by Per Bothner's questions about MIPS
+	support.
+
+	* gdb.texinfo:  Document "complaints".  Change doc of -q since
+	gdb no longer prints the copyright and blurb if you specify a file
+	name to be debugged (just like Emacs).  Add doc for Nindy-specific
+	command line flags for specifying target serial port and such.
+	Update copyright to 1991.
+
+	* gdbcore.h:  Remove a large mass of now-useless crud, since BFD
+	has taken over for us the job of ripping up executable files.  The
+	crud caused Per Bothner's port to not compile.
+
+	* infrun.c (normal_stop):  Avoid printing "Program exited
+	normally" if we are in batch mode.  This allows a GDB which
+	executes a program on a target system, to behave like a Unix
+	command (input from stdin, output to stdout, no extraneous
+	output).
+
+	* main.c (main):  Allow additional machine-dependent command line
+	options to be specified with the ADDITIONAL_OPTIONS,
+	ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP, and
+	ADDITIONAL_OPTION_HANDLER macros.  Also allow machine-dependent
+	processing to occur just before the main loop with
+	BEFORE_MAIN_LOOP_HOOK.  
+	(main):  If a "core file" argument is specified, and it is not a
+	core file, try it as a process ID to attach.  
+	(symbol_completion_function):  Attempt to cope with 
+	"show screen-" TAB, not very successfully.  This needs more work,
+	FIXME.
+	(batch_file):  New function, returns whether we are reading
+	commands from an interactive tty on stdin, or from somewhere else.
+	Called by normal_stop since it doesn't get from_tty passed down
+	to it like many commands do.
+
+	* remote-nindy.c:  Handle command line options for nindy
+	connection.
+	(nindy_before_main_loop):  Prompt user for tty name if they
+	don't specify it before getting to the interactive command loop.
+
+	* tm-i960.c:  Add ADDITIONAL_OPTIONS, etc, to handle -O, -brk,
+	and -r command line options.  Also add hook before main loop
+	to make it easy to specify a tty.
+
+	* TODO:  More things to do, one done.
+
+Mon Feb  4 23:57:39 1991  John Gilmore and Mike Tiemann  (at cygint.cygnus.com)
+
+	* dbxread.c:  Make complaint() calls pass pointer, not struct.
+	Add complaints about badly formatted C++ type information
+	(const/volatile indicator, and parse errors resulting in
+	error_type).  Fix C++ virtual member fn comment.
+	(read_struct_type):  Avoid bumping pointer if we got a parse
+	error; this prevents our walking beyond the end of a string.
+	Terminate loop on null char as well as semicolon.
+	(process_one_symbol):  Fix the LBRAC fix so that it uses the
+	last previous SLINE, FUN, or SO record's PC address.  C++ debug
+	symbols did not have SLINE records in a useful order compared
+	to the LBRAC records.
+	(define_symbol):  Handle "catch" records.
+
+	* symtab.c (check_stub_type):  Added new complain
+	`stub_noname_complain' and added a consistency check to
+	keep the debugger from crashing when finishing from an
+	exception frame.  A real fix will be needed later.
+
+Sat Feb  2 10:43:05 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* infcmd.c (attach_command):  Make global.
+
+	* Makefile.dist (REMOTE_OBS):  Make these compile by default,
+	but make them easy to comment out.  Perhaps later they should
+	be enabled by what CPU you configure for?  FIXME.
+	(VERSION):  Roll to 3.93.
+	(pinsn.o):  Remove rule for obsolete file.
+	(dbxread.o,coffread.o,mipsread.o):  Use ${srcdir} explicitly.
+
+	Run down a problem that manifested by printing the wrong function
+	name in stack traces of read_ofile_symtab.  Turned out that the 
+	problem was the SunOS 4.1.1 (and previous) C compiler outputs
+	the LBRAC symbol with an address in the *data* segment, which
+	blew our binary search through the blocks.
+
+	* dbxread.c: Use the complain() facility consistently to bitch
+	about problems in the symbol file we are reading.
+	(finish_block):  Add code to check the nesting of the blocks;
+	complain and Procrust them to fit if wrong.
+	(make_blockvector):  Check the order of the blocks, complain 
+	[but don't cope] if wrong.
+	(process_one_symbol):  ifndef SUN_FIXED_LBRAC_BUG, check LBRAC
+	symbols to be sure their PC value is greater than the last SLINE
+	(line number) symbol we've seen, complaining and adopting the
+	SLINE PC value if wrong.
+
+	* symfile.h (struct complaint, complaint_root, complain, 
+	clear_complaints):  Add.
+	* symfile.c (complain, complaint_root, clear_complaints):  Add
+	facility to deal with non-fatal complaints and to regularize their
+	suppression.
+	(symbol_file_add):  Clear complaint counters to allow new complaints.
+	(initialize_symfile):  Add 'set complaints' and 'show complaints'.
+
+	* dbxread.c (dbx_symfile_read):  Remember the address and size
+	of the string table for the main symbol file, so we won't read it
+	more than once.
+	(dbx_psymtab_to_symtab):  Fix the check for main symbol file,
+	to avoid reading the string table yet again.  Lint.
+	(throughout):  Improve filtered output, including word wrap.
+	(read_range_type):  Improve Bothner's fix to handle other types too.
+
+	* utils.c:  Improve line wrap implementation.  Handle unlimited
+	width by making chars_per_line unsigned.
+	(puts_filtered):  New, easy, function.	
+
+	* defs.h (puts_filtered):  add.
+
+	* mipsread.c (compare_symbols, sort_symtab):  Remove these fns,
+	call the identical sort_symtab_syms() in symfile.c instead.
+
+	* expread.y:  Suggest the `file' command rather than `symbol-file'.
+
+	* command.h (enum var_types):  Add zinteger for seroable
+	unsigned integer.
+	* command.c (do_setshow_command):  Handle var_zinteger.  Restructure
+	nested if's into a switch.
+
+	* breakpoint.c (bpstat_print): If bpstat "print" flag is not set,
+	we did not stop because of a breakpoint (it must have been for
+	some other reason, like a "stepi"), so don't print anything.
+
+	* symtab.c: Include <sys/types.h> all the time.  Now that BFD
+	doesn't include <sys/types.h>, old SunOS's require it for
+	<sys/stat.h>.
+
+Sat Feb  2 10:39:15 1991  Per Bothner  (bothner@cs.wisc.edu)
+
+	A test port of gdb-3.92.6 to the Sony NEWS.
+
+	* Makefile.dist
+	Don't normally link in remote- or vx stuff.
+	Some of it doesn't compile, and it wastes space for 99%	of the users.
+	Remove reference to no-longer-used HAVE_VPRINTF.
+	Fixed BFD_DEP typo to BFD_DIR.
+	* dbxread.c
+	Fix cast in arg to bfd_h_getlong.
+	Make char *prefix be const.
+	Fix how certain range types are mapped into builtin unsigned int types.
+	* infrun.c
+	Remove 2 #includes. They cause errors (on Sony, at least),
+	and aren't needed (they wern't in earlier versions).
+	* printcmd.c
+	print_address_symbolic should never demangle labels
+	(since it prints *assembler-level* labels).
+
+	       [This was superseded by the change to printcmd below.]
+
+	* utils.c
+	Add some "volatile" return types to avoid warnings.
+	If MISSING_VPRINTF add vprintf function and not just macro
+	(since vprintf is used in printcmd.c).
+	* valprint.c
+	Unless __GNUC__, use obstack_grow instead of obstack_ptr_grow.
+	(The latter isn't grokked by some PCC-based compilers.)
+
+	     [This change is in abeyance, we prefer to fix obstack_ptr_grow.]
+
+	Make chunk size of dont_print_obstack 32*4 instead of default 4096.
+	* nindy-share/coffstrip.c
+	Added some forward declarations (otherwise, gcc complains
+	about implicit extern redefined as static).
+
+Sun Jan 20 02:38:19 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Changes inspired by Per Bothner:
+	* printcmd.c (print_address_symbolic):  Take additional parameter
+	specifying whether to demangle.
+	(print_address):  Pass in asm_demangle to control demangling.
+	(print_address_demangle):  New fn, takes explicit arg to control
+	demangling.
+	* utils.c:  Add new vars demangle and asm_demangle, and let them
+	be set and shown.
+	(fputs_demangled):  If !demangle, just print the argument.
+	(fprint_symbol):  If !demangle, just print raw symbol.
+	* valprint.c (val_print):  Call print_address_demangle rather than
+	print_address, to cause demangling to depend on the global
+	rather than assembler-level demangling setting.
+	* WHATS.NEW, gdb.texinfo:  Document.
+
+	* main.c (show_command):  Show all settings if no arg.
+	(initialize_main):  Make "info set" the same as naked "show".
+	* command.c (cmd_show_list):  Handle prefix commands in the
+	list, and print the name of the setting as well as its English
+	description and value.
+
+	Allow gdb functions to specify where a line should wrap if it
+	exceeds the size of a terminal line.  Use it to make the output
+	prettier.
+	* utils.c (set_screen_width_command):  New fn, mallocs a buffer
+	of the right size when screen width changes.
+	(set_screensize_command, screensize_info):  Remove #if 0'd fns.
+	(wrap_here):  New fn, indicates a point in the output where we
+	should wrap the line rather than just letting it overflow at a
+	random place.
+	(fputs_filtered):  Implement wrapping.
+	(n_spaces):  New fn, returns a pointer to N spaces.
+	(print_spaces_filtered):  Use n_spaces.
+	* defs.h (n_spaces):  Declare.
+	* stack.c (print_frame_info):  Wrap with 4-space indent after
+	fn name and before filename and line number.
+	* printcmd.c (print_frame_args):  Wrap with 4-space indent
+	before each argument name is printed.
+	* valprint.c (value_print):  Wrap with no indentation before
+	each repetition.
+	(val_print_fields):  Wrap with indentation relative to nesting
+	level before each field name.
+	(val_print):  Wrap with nesting indentation before array elements.
+	* command.c (do_setshow_command):  Avoid extra newlines,
+	wrap with 4-space indent around values printed, end with period.
+	* WHATS.NEW, gdb.texinfo, gdb-int.texinfo:  Document.
+
+	* breakpoint.c (breakpoint_1):  Implement addressprint for
+	"info breakpoints" display.  Change file name and line number
+	format to " at file:nnn" rather than " (file line nnn)".
+	* gdb.texinfo:  Document.
+
+
+Fri Jan 18 07:21:25 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	Frozen for gdb-3.92.6 release.
+
+	README, WHATS.NEW:  Update for 3.92.6 release.
+
+	tconfig/{altos, i386v, i386v32, m88k, umax}:  Eliminate
+	coffread.o from configs since it is now built by default.
+	tconfig/{3b1, altosgas, arm, convex, hp300bsd, hp300hpux,
+	i386v-g, i386v32-g, isi, merlin, news, news1000, np1, pn,
+	pyramid, symmetry, vax, vxworks68}:  Eliminate dbxread.o
+	from configs since it is now built by default.
+
+	Makefile.dist: Update for release 3.92.6.  Handle files that
+	have been moved to ../include, ../getopt, or ../bfd.  Add
+	saber.suppress and tests directory.  Add config.status to
+	the release (it will say "none").
+
+	coredep.c:  Minor formatting fixes.
+
+	These changes were made in early December but only checked in now:
+	* nindy-share/Onindy.c, nindy-share/coffstrip.c,
+	nindy-share/nindy.c:  lint
+	* nindy-share/nindy.c (ninStopWhy):  Don't byteswap the 
+	register values coming back from the target; we store values
+	in target byte order everywhere.
+
+Wed Jan 16 19:01:37 1991  John Gilmore  (gnu at cygint.cygnus.com)
+
+	* am29k-opcode.h, am29k-pinsn.c:  Add 29050 opcodes.
+
+	* valprint.c (cplus_val_print, val_print_fields):  New functions,
+	which print C++ objects.  They conspire to avoid printing a
+	virtual base class more than once, following all the twists and
+	turns of C++ virtual base rules.
+	(val_print):  Call the above rather than do it by hand.
+
+	* symfile.c (symbol_file_add):  Only reset symfile_mtime for main
+	symbol file, not for added files like shared libs.  This really
+	needs to be generalized to a timestamp per file.
+
+	* core.c (cleanup_core):  Avoid coredump if no core file.
+	
+	* config.gdb:  Accept -host or -target in place of +host or
+	+target.
+
+	* coffread.c (find_linenos):  Avoid desupported BFD interface
+	to line numbers.  We still read them manually rather than using
+	BFD's "generic" features.
+
+	* gdbrc.tex, threecol.tex:  Add GDB reference card and its
+	formatting code.
+	Makefile.dist:  Add refcard to OTHERS list for creating tar files.
+
+	* Makefile.dist:  Eliminate use of $< in explicit targets.
+
+	* readline/Makefile:  Use $< rather than $*.c, which does not
+	include the VPATH in GNU Make.
+
+	* tconfig/i960-bout, tconfig/i960-coff:  These are identical
+	copies of tconfig/i960, added for global configuration
+	compatability.  All i960 versions can read both coff and b.out.
+
+	* tm-88k.h:  Fix multiline macro that lacked \'s.  Remove
+	COFF_FORMAT and COFF_CHECK_X_ZEROES since these are now handled
+	automaticaly.
+
+	* TODO:  Think of more things to do.
+
+Wed Jan  2 19:09:29 1991  John Gilmore  (gnu at spiff.cygnus.com)
+
+	tconfig/{am29k,i960,sun2*,sun3*,sun4*}:  Eliminate config
+	of sdb versus dbx debug symbols.  Add kludge for 68881 80-bit to
+	64-bit float conversion.
+
+	tconfig/sun4, tconfig/sun3, xconfig/sun4, xconfig/sun3:  Make
+	equivalent to sun?os4 so global config works.
+
+Wed Jan  2 18:20:51 1991  John Gilmore  (gnu at spiff.cygnus.com)
+
+	Fix from Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
+	
+	* main.c:  Only declare linesize once; declare pagesize not at
+	all, since it is never used.
+	(main):  Clear newly allocated line before it is used.
+
+Fri Dec 28 00:13:42 1990  John Gilmore  (gnu at cygint)
+
+	Further stabilization for the Intel 960.
+
+	* Makefile.dist: Parameterize the location of the "include"
+	and "bfd" directories, as well as "getopt".  Add symfile.c.
+	Link in both dbxread and coffread.  Fix up "make depend" to
+	rewack the locations of include, bfd, and getopt in its output.
+
+	* README:  Document moving include files, improve some of
+	the other doc.
+
+	* coffread.c:  Move common code out to symfile.c.  Change
+	symbol_file_command style interface to use new *_symfile_init
+	and *_symfile_read interface under BFD.  Use BFD internal
+	info to locate line table, symbols, etc.
+
+	* core.c (core_fetch_registers):  Rename to get_core_registers
+	to avoid confusion with fetch_core_registers.
+	(register_addr):  Move to coredep.c, which is already machine
+	dependent.  This leaves core.c pretty clean of dependencies.
+
+	* coredep.c (register_addr):  Accept this routine from core.c.
+
+	* dbxread.c: Move common code (with coffread.c, etc) into new
+	symfile.c.  Each psymtab now contains a pointer to the
+	format-dependent function that knows how to read it in.  Make
+	some things static.  
+	(dbx_psymtab_to_symtab): Renamed from psymtab_to_symtab_2.
+	(process_one_symbol): Add code to complain about a "compiler bug
+	we muzzle here", if we actually see it.
+
+	* eval.c (evaluate_subexp):  Insert missing "break" statements
+	in code that determines whether a variable is an lvalue in
+	memory, register, or whatever.	I detected this via a compiler
+	bug in which it *almost* mashed out the whole switch statement.
+
+	* gdb-int.texinfo:  Add minor sections on configuring gdb for
+	release, and about the README file.
+
+	* infcmd.c (registers_info):  Fix formatting somewhat.  Still
+	not as pretty as before, but it handles byte swapping.
+
+	* remote-nindy.c: If data cache routines are interrupted while
+	waiting for the remote end, be sure that any uninitialized cache
+	blocks are on the free list, not on the valid list!
+
+	* symfile.h: Flesh out this header file with all the various
+	routines and variables that have been merged in from dbxread.c
+	coffread.c, and symtab.c to symfile.c.
+
+	* symfile.c: New file, containing code common to dbxread.c,
+	coffread.c, and some code from symtab.c.  All generic code for
+	reading symbol files should be in here now.
+	(unrecord_misc_function):  Remove unused function.
+
+	* symtab.h:  Remove file-reading things to symfile.h.
+
+	* symtab.c:  Remove file-reading things to symfile.c.
+
+	* tm-i960.h:  Fix FRAME_CHAIN types; define PRINT_RANDOM_SIGNAL
+	to decode i960 fault types.
+
+	* target.h, remote.c, remote-eb.c, remote-vx.c, remote-nindy.c,
+	target.c: Change type of the "resume" function from int to void,
+	since its result was never used.
+
+Sat Dec 22 02:51:40 1990  John Gilmore  (gnu at cygint)
+
+	* main.c:  Replace "stupid" with "caution"; you now "set caution
+	on or off".
+
+	* printcmd.c (print_scalar_formatted):  Fix typo in 'g' format
+
+	* infcmd.c (do_registers_info):  Call val_print to deal with the
+	byte order of the registers being printed.  FIXME, this makes
+	the formatting of the output uglier.
+
+	* infcmd.c (wait_for_inferior):  If PRINT_RANDOM_SIGNAL is
+	defined, call it for signals the debugger doesn't itself use.
+	The i960 uses this for more detailed fault information.
+
+	* remote.c (remote_open):  If arg is null, print help rather than
+	dumping core.
+
+	* sparc-xdep.c (register_valid):  Avoid declaring size, since
+	various modules will think of various sizes depending on the
+	architecture of their tm-file.  FIXME, we need protection against
+	actually entering one of those modules, which would clobber
+	storage if not for the target architecture compiled into gdb.
+
+	* stack.c (up_command, down_command):  Always print the frame
+	you arrive at.
+	(up_silently_command, down_silently_command):  New commands
+	for use in scripts.
+
+	* i960-pinsn.c (reg), i960-tdep.c:  Lint.
+
+	* i960-tdep.c (i960_frame_chain_valid): Lookup_symbol now takes
+	more parameters than it used to.
+
+	* findvar.c (registers):  Increase slop to 256 bytes, which should
+	protect us against even most RISC machines with large register
+	sets.
+	(locate_var_value):  Move declaration inside related ifdef.
+
+	* remote-nindy.c ():  Use TIOCSETN rather than TIOCSETP
+	throughout, to avoid throwing away buffered input from the board.
+	(nindy_wait):  Supply_register takes addr_of_value, not value.
+	(i960_print_fault):  Renamed from i80960_fault.
+	(nindy_fetch_registers):  Avoid have_regs stuff, just get them.
+	(nindy_store_registers):  Avoid regs_changed stuff, just stuff
+	them.
+	(nindy_create_inferior):  Don't bother to write PC_REGNUM since
+	we can set the PC in the call to proceed().  Unpush nindy_ops
+	before pushing it on top, to avoid message to user.  Eliminate
+	commentary from Unix machines that just misleads here.
+	(reset_command):  Fix error message to suggest target command.
+	
+Wed Dec 19 11:03:56 1990  John Gilmore  (gnu at cygint)
+
+	Release 3.92.5 as frozen.
+
+	Stabilize the merged release...with help from lint, Saber C,
+	gcc -W, etc.
+
+	Everywhere:  Add include files needed to declare return types
+	of functions called.
+
+	* gdb.texinfo:  Roland Pesch is documenting gdb, glory be!
+
+	* breakpoint.h:  Add undeclared breakpoint functions, and some
+	functions for display handling since I couldn't think of a better
+	.h to put them in.
+
+	* breakpoint.c (insert_breakpoints):  Make code for disabling
+	shared library bkpts more likely to work.  It's used when we
+	rerun a program and stop before the shared library has been
+	mapped in.
+	(breakpoint_cond_eval, bpstat_stop_status):  Pass arg as int,
+	cast from pointer, so it squeezes through catch_errors.
+	(bpstat_stop_status):  Fix logic broken some time ago.  We now
+	always create a bpstat if the stop address matches a breakpoint,
+	even if we don't stop there -- just like the old code used to do
+	before I got my fingers into it (sigh).
+	(breakpoint_1):  Print "ignore count" after "stop only if"
+	condition, since that's how it actually works.
+	(mention):  Handle watchpoints as well as breakpoints.
+	(watch_command):  use set_raw_breakpoint and mention to do most 
+	of the work (and initialize all the fields!).  Only pass one
+	arg to parse_c_expression, since that's all it takes.
+
+	* command.c (not_just_help_class_command):  Rename arg to args
+	since we ignore "unused argument" warnings on vars named "args".
+	inflow.c (child_terminal_info):  ditto.
+	infptrace.c (kill_inferior):  ditto
+	main.c (catch_errors, version_info, quit_command, pwd_command,
+	source_command, dump_me_command, editing_info,
+	set_history_size_command, set_history, show_history,
+	set_verbose): ditto
+	stack.c (locals_info):  ditto
+	target.c (target_files_info):  ditto
+	valprint.c (set_input_radix, set_output_radix):  ditto
+
+	* core.c:  Remove old variables for handling core and exec file
+	sections (data_start, data_end, stack_start, stack_end,
+	reg_stack_start, reg_stack_end, reg_stack_offset, text_start,
+	text_end, exec_data_start, exec_data_end, text_offset,
+	exec_data_offset, data_offset, stack_offset).  They're
+	superseded the more general build_section_table and
+	xfer_memory.
+	(get_exec_file):  Mention the `file' command.
+	(read_memory_check):  Rename to memory_error, and only call it
+	in the case of an actual error.
+	(read_memory, write_memory):  call memory_error.
+	(core_fetch_registers):  Register section name is ".reg".
+
+	coredep.c:  Remove a bunch of crud now that all this file does
+	is pull the registers out of a core file.
+	(fetch_core_registers):  Rewrite to actually work, I hope.
+
+	dbxread.c:  Use a.out.gnu.h, not system a.out, now.
+	Replace index() with strchr().  Remove all the pre-BFD macro
+	definitions for accessing the symbol file.
+	(struct dbx_symfile_info):  Encapsulate the information that
+	dbx_symfile_init needs to pass to dbx_symfile_read in this
+	struct.
+
+	(dbx_new_init, dbx_symfile_init, dbx_symfile_read,
+	dbx_symfile_discard): Rearrange symbol file reading to divide
+	the format-specific part from the format-independent part,
+	leaving the format-independent part such as file name expansion
+	and opening in symtab.c.  This replaces
+	partial_symbol_file_open and partial_symbol_file_read.
+	Symbol_file_read, add_file, add_file_target_command,
+	add_file_addr_command move to symtab.c.  Pass an explicit
+	"mainline" flag for when reading the main symbol table, rather
+	than relying on the offset address to be zero or nonzero.
+
+	(dbx_symfile_read): Don't allow void *'s to be printed as
+	typedefs.
+	(SWAP_SYMBOL):  Use bfd routines to byte-swap the symbols.
+	(ADD_PSYMBOL_TO_LIST):  Make the "function call rather than
+	macro" debug version really work.
+	(read_dbx_symtab):  Remove unref'd parameter inclink.
+	Avoid swapping N_SLINE symbols, for speed.
+	Merge N_TEXT!N_EXT case with the other external symbol
+	definitions' case. Add comments.
+	(start_psymtab):  Allocate the symfile name in the psymtab on
+	the psymbol_obstack, rather than using the caller's storage.
+	(end_psymtab): Only allocate a dependencies list if there are
+	more than zero.
+	(psymtab_to_symtab_2):  Use BFD when reopening file to read
+	its symbols for real.
+	(read_struct_type):  Add FIXME comments where it needs work
+	for C++ bogosity.
+	(read_huge_number):  Add FIXME about overflows.
+	(read_range_type):  Add FIXME about comparing a long to 1<<32.
+
+	* coffread.c:  Minor changes to move things closer to the new
+	regime with symtab.c and dbxread.c   Major work is still needed
+	here.
+
+	* exec.c (exec_file_command):  Remove old variables (see core.c
+	above).
+	(xfer_memory): If memory transfer is right at the end of a
+	section, don't lose.
+
+	* findvar.c (get_saved_register):  If value is in a real
+	register, LVAL is lval_register, not lval_memory.
+
+	frame.h:  Declare print_sel_frame and record_selected_frame.
+
+	gdb-int.texinfo:  New file, for GDB internals documentation.
+	Very simple, unformatted doc of cleanups is there for now.
+
+	gdbcore.h:  Remove obsolete variables that described a.out
+	section addresses and offsets.  (See core.c above.)
+	Declare fetch_core_registers and registers_fetched.
+
+	getopt.c:  Declare char *alloca(); even on SPARC.
+
+	infcmd.c (run_command):  Call target_kill rather than
+	kill_inferior. 
+	(step_command, next_command, stepi_command, nexti_command):
+	Declare from_tty parameter even though we don't use it.
+	(run_stack_dummy):  argument BUFFER is a char array, not
+	a pointer to REGISTER_TYPE.
+	(finish_command):  using_struct_return needed a value *, 
+	not a struct symbol *.
+
+	* infptrace.c (child_xfer_memory):  To avoid dependency on
+	where sections are in memory, try PT_WRITE_D and if that fails,
+	try PT_WRITE_I.  Most Unixes don't care which you use.
+
+	* infrun.c (step_resume_break_shadow):  Change to array to
+	match other breakpoint shadow storage.
+	(clear_proceed_status):  Pass address of bpstat to
+	bpstat_clear, not the bpstat itself.
+	(child_create_inferior):  FIXME comment about if the child
+	exits.
+	(start_inferior):  Remove old function.
+	(child_open):  Use target_kill rather than kill_inferior.
+	(wait_for_inferior):  Ditto.
+	(insert_step_breakpoint, remote_step_breakpoint):  Use
+	new step_resume_break_shadow.
+
+	* inftarg.c (child_wait):  If all child processes die,
+	pretend that the one being waited for exited with signal 42.
+
+	* main.c (command_line_input):  When scanning for comments,
+	don't coredump on unclosed quotes.
+	(quit_command):  Use target_kill rther than kill_inferior.
+	(_initialize_main):  Rename class_user from "user" to
+	"user-defined".
+
+	* printcmd.c (print_command_1):  Initialize "fmt" if no format
+	is specified by the user.
+	(print_frame_args):  Only add to args_printed if we are
+	actually fetching args from the stack (avoiding undefined
+	arg_size).
+	(_initialize_printcmd):  Remove bogus \{ from string.
+
+	* remote-eb.c (eb_open):  Avoid coredump on no argument.
+
+	* remote-nindy.c:  Bring out of Intel environment into new
+	target environment.  Remove all conditional compilation on
+	I80960.  Massive hacking throughout.
+	(nindy_xfer_inferior_memory):  New routine stolen from
+	infptrace.c.
+	(nindy_create_inferior):  New routine pieced together, probably
+	not quite working yet.
+	(nindy_ops):  New target_ops struct for nindy.
+
+	* remote-vx.c:	Use write_memory rather than target_write_memory
+	to get error checking.
+	(vx_add_file_command, vx_open): Use symbol_file_add rather than
+	add_file.
+	(vx_create_inferior):  Use target_terminal_ours...
+
+	* signame.c (_initialize_signame):  Always initialize, since
+	we need the table for things other than psignal.
+	
+	* solib.c (solib_add):  Use symbol_file_add, not add_file.
+	(solib_address):  Return boolean result rather than struct
+	pointer which nobody else knows the type of.
+
+	* sparc-tdep.c, valops.c:  Use write_memory rather than
+	target_write_memory, to get error checking.
+
+	* stack.c (locals_info, catch_info, args_info,
+	get_selected_block, frame_command, up_command): Use
+	target_has_stack, rather than have_inferior_p or
+	have_core_file_p.
+
+	* sun3-xdep.c (fetch_core_registers):  Rewrite for new BFD regime.
+
+	* symfile.h:  New file, defining the interface between the
+	generic and object-file-specific symbol reading code.
+
+	* symtab.c:  Move generic symbol-reading interface to symtab.c,
+	from dbxread.c, coffread.c, mipsread.c, etc.  Add symtab_fns
+	table to map BFD targets to symbol-reading modules in GDB.
+	Change index to strchr.
+	(lookup_struct_elt_type):  Use error() rather than hand-made
+	simulations thereof.
+	(lookup_partial_symbol):  Speedup slightly when length == 0.
+	(symbol_file_add):  New function.
+	(symbol_file_command):  Call it.
+	(symfile_open, symfile_init):  New function.
+	(add_file_target_command, add_file_addr_command): moved from
+	dbxread.c.
+
+	* target.c (target_command):  use target_kill.
+
+	* target.h (target_files_info):  Don't declare, never called
+	from outside.
+
+	* tm-sun2.h, tm-sun3.h (STACK_END_ADDR): Use system include
+	files to determine stack end address.
+
+	* valarith.c (value_x_binop, value_x_unop): Change error message
+	to be more useful.  Pass proper argument to value_struct_elt.
+
+	* valops.c (value_assign):  FIXME comment that long long 
+	bitfields will break here.
+
+	* Makefile.dist:  Add symfile.h, remote-nindy.c, remote-eb.c.
+	Update `make saber_gdb' to work better.
+
+	* TODO:  A woman's work is never done.
+
+	* cplus-dem.c, environ.c, inferior.h, infrun.c, inftarg.c,
+	main.c, obstack.c, printcmd.c, remote-eb.c, remote-nindy.c,
+	remote-vx.c, remote.c, solib.c, source.c, sparc-pinsn.c,
+	sparc-tdep.c, sparc-xdep.c, symmisc.c, symtab.c, symtab.h
+	target.c, terminal.h, tm-sparc.h, tm-sunos.h, utils.c,
+	valops.c, valprint.c, exec.c:  Lint.
+
+
+Wed Dec 12 23:44:15 1990  John Gilmore  (gnu at cygnus.com)
+
+	Continuing Intel 960 port merge of GDB.
+
+	* Makefile.dist:  Merge i960 "nindy-share" files.  Rename
+	malloc.h to gmalloc.h to avoid name conflicts in /usr/include.
+	Don't ship gdb.dvi in tar file.  Link gdb with init.o, not init.c.
+	Wack over "make depend" so it handles files in subdirectories
+	vx-share, nindy-share, bfd, and in the current directory.
+
+	* blockframe.c (get_prev_frame_info):  Remove fatal error
+	if stack not defined.
+
+	* core.c (core_open, core_detach):  New functions that handle
+	the old "core-file" command as "target core" and "detach" instead.
+	(core_file_command):  Call them.
+	(core_xfer_memory):  Use common routine xfer_memory.
+
+	* dbxread.c:  Include a.out.gnu.h, not system a.out.h.
+	dbxread now uses bfd for everything but symbol reading itself.
+	BFD internals are used to drag out the relevant file offsets.
+	(partial_symbol_file_open):  Change args all around for BFD.
+
+	* symtab.c: Rename "value" to "val" everywhere, so we can
+	#include "value.h".
+	(symbol_file_command):  New command, moved from dbxread.c
+	and coffread.c.  It uses BFD to read the file, then vectors
+	based on its type, to dbx or coff symbol readers.
+	* symtab.h:  Extern a few vars for symbol_file_command.
+
+	* target.h:  Breakpoint takes a char * save area, not a char **.
+
+	* valprint.c (val_print):  When unpacking bitfields, offset
+	the address in gdb of the value, if it is declared with a shorter
+	type.  Remove the last "runtime kludge test" of host byte order.
+
+	* utils.c:  Remove old my_bfd_read routine.
+
+	* stack.c (frame_info):  Use target_has_stack.  Print program counter
+	register's actual name rather than "pc", since it's called the
+	"ip" (instruction pointer) on the i960 (sigh).
+
+	* target.c (target_command):  Add command for selecting a target
+	type and calling its open routine.  This is used for initiating
+	communication with a particular target, in a generic way.
+
+	* tm-i960.h:  Update for modern gdb.  Remove semicolons from
+	various macros.  Handle reading struct return convention, and
+	error-out attempts to return structs with the "return" command.
+	Be sure gdb doesn't think we know how to call functions in the
+	inferior.
+
+	* i960-tdep.c:  Rename FRAME_CHAIN_VALID and FRAME_FIND_SAVED_REGS
+	to i960_xxx in lower case.
+	(arg_address):  Circumvent errors due to LOC_ARG_BLOCK
+	not being defined yet.
+
+	* remote.c (remote_open):  Call start_remote to initialize 
+	wait_for_inferior during open.
+	(remote_xfer_inferior_memory):  Return length written rather
+	than errno value.
+
+	* remote-vx.c (target_command -> vx_open):  Use new generic
+	target command.
+	* remote-eb.c, inftarg.c, exec.c: ditto.
+
+	* infrun.c:  Fix comments.
+	(attach_program -> child_open):  Use new generic target command.
+	(wait_for_inferior):  Clear saved register values before target_wait,
+	so target_wait can set some of them if convenient.
+
+	* infptrace.c (fetch_inferior_registers, store_inferior_registers):
+	Return success indicator, not void.
+	(child_xfer_memory):  Avoid fetching initial word if we'll
+	overwrite it anyway.
+
+	* infcmd.c (attach_command):  Use new generic target open routine.
+	(_initialize_infcmd):  Update doc on attach and detach commands.
+	(do_registers_info):  Merge in a byte-order problem as a FIXME
+	comment.
+
+	* findvar.c (find_saved_register):  Avoid problem in current frame.
+	(read_relative_register):  Ditto.
+	(write_register):  Convert byte order on the way out.
+
+	* exec.c (file_command):  Add.
+	(add_to_section_table, exec_command):  Use new bfd_map_over_sections.
+	(xfer_memory):  Common function between core_xfer_memory and
+	exec_xfer_memory.
+	(exec_xfer_memory):  Use it.
+
+	* pn-opcode.h:  Document that a "PN" is a Gould PowerNode.
+
+	* breakpoint.c, breakpoint.h, symtab.h, value.h, frame.h, utils.c,
+	valops.c, stack.c, target.c, sparc-xdep.c, source.c, printcmd.c,
+	infcmd.c, i960-pinsn.c, eval.c, defs.h:  lint and gcc -Wall.
+
+Sun Dec  2 16:45:06 1990  John Gilmore  (gnu at cygnus.com)
+
+	Merge Intel 960 port of gdb, continuing...
+
+	* dbxread.c (partial_symbol_file_open, partial_symbol_file_read,
+	symbol_file_command):  Pass from_tty arg to hush 'em up.
+
+	* coffread.c (symbol_file_command):  Avoid output if from_tty != 1.
+	Add magic numbers for 960 COFF format.
+
+Fri Nov 30 09:18:20 1990  John Gilmore  (gnu at cygnus.com)
+
+	Merge Intel 960 port of gdb, from Intel "1.2" release.
+
+	CHANGE_LOG entries from their port, which was based on
+	gdb+-2.8.0:
+
+    Thu Sep  6 11:02:22 PDT 1990
+	Remove temp file if download is interrupted.
+
+    Wed Aug  1 09:08:33 PDT 1990
+	Now uses binary protocol to talk to NINDY.
+	Old hex protocol (NINDY 2.13 and older) supported with -O switch.
+	Times out after 5 seconds when trying to talk to NINDY.
+
+    Tue May 29 12:54:49 PDT 1990
+	Added variable baud rate (-b switch).
+	Source code reorganization.
+
+    Thu Apr 26 11:09:55 PDT 1990
+	More cleanup of batch mode;  specifically, execute "-s", "-e", and
+	"-se" switches as soon as they are encountered on the invocation line.
+
+    Fri Apr 20 13:47:15 PDT 1990
+	Add -brk switch.
+
+    Thu Apr 19 09:54:28 PDT 1990
+	Add 'reset' command.
+
+    Wed Apr 18 09:48:07 PDT 1990
+	After opening remote tty, wait for 1 second to go by without input
+	from it before trying to talk to NINDY (fixes problems with the
+	Heurikon HK80/V960E).
+
+    Mon Apr  4 16:33:05 PDT 1990
+	Some output was not being suppressed in 'batch' mode.
+
+    Thu Mar 22 15:31:11 PST 1990
+	Ask user if old symbol table should be deleted when new file is
+	downloaded.
+
+	Allow user to run a program downloaded before gdb960 was brought up.
+
+	Correct "exec-file" help message for i80960 context.
+
+	Correct bug in calculating user space address:  could occasionally
+	corrupt user program.
+
+	Make sure to zero low-order bits in rip's because of bug in 960CA
+	A-step part:  could cause operation faults when "next"ing across
+	a function call.
+
+	Correct bug that made it impossible to get source line numbers for
+	code loaded at addresses higher than 0x7fffffff.
+
+    Wed Jan 10 12:43:22 PST 1990
+	Open remote tty for exclusive use.
+
+    Fri Jan  5 12:14:42 PST 1990
+	Correct disassembly (CA manual was right after all):
+	opcode for sysctl is 0x659
+
+    Mon Oct 23 12:03:04 PDT 1989
+	Use G960BASE and G960BIN environment variables to find 'sx' utility.
+
+    Mon Oct 16 14:15:09 PDT 1989
+	"sfr0"-"sfr31" should have been named "sf0"-"sf31"
+
+    Mon Oct  2 15:56:31 PDT 1989
+
+	Added 960CA disassembly support.
+
+	To simplify maintenance:
+		- eliminated use of symblic links on pinsn.c: use i960-pinsn.c
+			directly instead.
+		- eliminated opcode.h: incorporates tables into i960-pinsn.c
+		- moved 960-specific routines from i960-pinsn.c to i960-md.c
+		- made disassembly interface identical to that in gdmp960.
+
+
+
+Wed Nov 28 21:32:48 1990  John Gilmore  (gnu at cygint)
+
+	* target.h: Allow targets to stack.  Add target_has_memory,
+	_registers, etc.  Restructure memory access and "info files"
+	to walk the target stack.
+	* exec.c, core.c, inftarg.c, remote.c, remote-vx.c, remote-eb.c,
+	target.c:  Change tables to match target.h.
+	* inflow.c (child_mourn_inferior):  pop child_ops.
+	(generic_mourn_inferior):  Use new has_stack flag.
+	* infptrace.c (child_xfer_memory): New memory regime.
+	* inftarg.c (child_files_info): New "info files" regime.
+	* remote-eb.c: New memory regime, new info files.
+	* remote-vx.c: New memory regime, new info files.  Now use
+	separate targets for VxWorks attachment to machine, and 
+	actually running a process under VxWorks, since one has
+	stack & execution & regs and the other doesn't.
+	* remote.c: New memory regime, new info files.
+	* sparc-xdep.c (fetch_core-registers):  New memory regime.
+	* target.c:  New routines and support for stacked targets,
+	new memory regime, new info files regime.
+	
+
+	Generalize section handling for an arbitrary number of sections,
+	including use of the new BFD (binary file) library.
+	* gdbcore.h: Add struct section_table.
+	* exec.c (build_section_table):  Iterate all sections and
+	record what gdb needs to know about them.
+	(exec_command):  Use it.
+	(exec_xfer_memory):  Use the table.
+	(exec_files_info):  Print the table.
+	* core.c (core_file_command, core_xfer_memory, core_files_info):
+	Likewise.	
+	* source.c (find_source_lines):  Use bfd_get_mtime.
+	* dbxread.c:  Quick changes to make it compile with new BFD.
+	* utils.c (error):  Avoid using bfd_error in generic routines.
+	
+	* core.c (core_fetch_registers):  Get from the ".regs" section of
+	the BFD core file.
+	* sparc-xdep.c (fetch_core_registers):  Use the .regs info.
+
+	* inferior.h (attach_flag):  Export.
+	* infcmd.c (run_command):  use new target_create_inferior.
+	* infrun.c (child_create_inferior):  Don't return result.
+	* Makefile.dist (VERSION):  3.91.4.
+
+Fri Nov 23 28:15:38 1990  John Gilmore  (gnu at cygint)
+
+	* breakpoint.c (bpstat_num):  Handle breakpoints which have
+	since been deleted, such as temporary breakpoints.
+	infcmd.c (program_info):  ditto.
+
+	* core.c (core_file_command):  Display the frame where the core
+	dump occurred.
+
+	* main.c:  lint.
+
+	* remote-vx.c (target_command):  Merge in target command from
+	targ-vx.c.  A few other cleanups.
+
+	* TODO, Projects:  Lots more stuff to do...
+
+Fri Nov 23 18:15:38 1990  John Gilmore  (gnu at cygint)
+
+	Massive changes to wall off the remote-debugging interface
+	behind a function vector.  The port to handle VxWorks targets
+	is also part of this.
+
+	All files:  Replace references to renamed functions,
+	remove references to remote_debugging, remove references to
+	have_include_file, have_core_file in favor of target_has_stack,
+	target_has_memory, etc.
+
+	* Modularize the breakpoint interface.
+	breakpoint.h (BREAKPOINT_MAX):  New define sets max length of
+	a breakpoint instruction.
+	breakpoint.c: struct breakpoint's shadow_contents now sized as
+	BREAKPOINT_MAX.
+	(insert_breakpoints):  Vector to target to install breakpoints.
+	(remove_breakpoints):  Vector to target here too.
+	Remove REMOTE_SA_SPARC kludges and other remote_debugging.
+	sparc-tdep.c (single_step):  Use new breakpoint interface for
+	the single-step breakpoints.
+	mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint):
+	New file, contains routines to insert and remove breakpoints by
+	reading out the old contents and later replacing them.  This is
+	how ptrace breakpoints work, and many remote systems as well.
+
+	* tm-vxworks68.h:  New config file, overrides a few things for
+	Wind River's preferences.
+
+	* target.h:  New file, for transfer vector used to talk to the
+	inferior (child, attached, core, exec, remote, etc).  All accesses
+	to the thing being debugged should come through these vectors.
+	target.c:  New file, routines to handle transfer vector.
+	(various files):  Add transfer vectors XXX_ops for the various
+	targets and pseudo-targets (core files, etc) we support.
+
+	* breakpoint.c (bpstat_stop_status):  Further explorations of
+	watchpoints and why things don't work all the time.
+	(bpstat_alloc):  New fn to allocate a bpstat and chain it.
+
+	* config.gdb:  Only add "source ${srcdir}/.gdbinit" to
+	the local gdbinit if it doesn't already have it.
+
+	* core.c (core_ops):  add and install.
+	Allow core debugging without exec file.
+
+	* dbxread.c (free_and_init_header_files):  Merge two fns.
+	(end_symtab):  Free named symbol table when a new version comes in.
+	(read_dbx_symtab):  Relocate all kinds of symbols with base
+	address.  First step toward handling different text, data, bss
+	reloc.
+	(add_file_addr_command):  Renamed add_file_command.
+	(add_file_command):  Vector to remote handler.
+	Add "load" as an alias for "add-file" command.
+
+	* defs.h:  Allow "volatile" to be used in non-ANSI; use it for
+	non-returning functions.
+
+	* exec.c:  Add exec_ops, and push it as a target when an exec
+	file is specified.
+
+	* infcmd.c (run_command):  Pass executable file name and arg list
+	separately when starting an inferior.  Permit "run" when no exec
+	file is specified, for VxWorks.
+	(detach_command):  Move to child_detach in inftarg.c.
+
+	* inftarg.c:  New file.  Unix-child-specific routines, and the
+	child_ops structure.
+
+	* inferior.h (registers):  Export "registers" as the way for
+	target dependent register handlers to find gdb's local copy of
+	the registers.  Rename "stop_after_attach" to "stop_soon_quietly"
+	since it is now used by places that want wait_for_inferior to
+	handle the grunge but want to see every trap from the inferior.
+
+	* inflow.c (create_inferior):  Pull out, and merge into infrun.c.
+	Eliminate remote_debugging hooks in terminal handling.
+
+	* infrun.c:  Replace start_inferior with child_create_inferior.
+	Move all the hair of Unix shells and ptrace idiosyncracies into
+	child_create_inferior, so remote handlers don't have to deal.
+	Remove running_in_shell.  Rename stop_after_attach to
+	stop_soon_quietly, and use it in a few other places where we want
+	to just call wait_for_inferior and get control back on the first
+	trap.  trap_expected now never takes a value > 1.
+	(init_wait_for_inferior):  Initialize static vars when a new
+	process is created.
+
+	main.c (gdbinit):  Add new hook for .gdbinit file name, let
+	it be overridden by config files as GDBINIT_FILENAME.
+	(DEFAULT_PROMPT):  Add new hook for overriding (gdb) prompt.
+	Both of these are used for VxWorks gdb.
+
+	mcheck.c:  rename include file "gmalloc.c" to avoid problems
+	with system include file "malloc.c".
+
+	param-no-tm.h:  New include file, same as param.h but does not
+	include the default "tm.h" file.  This is used in files where
+	the target is known, e.g. remote-eb.c or sparc-xdep.c.
+
+	param.h:  Now just a shell that includes tm.h and param-no-tm.h.
+
+	remote-vx.c:  New file, VxWorks remote debugging support.  Uses
+	RPC routines that are shared with the target system, in directory
+	${srcdir}/vx-share.
+
+	remote.c:  Vectorize remote interface.
+
+	source.c:  Globalize source_path, and make an alias "l" for "list"
+	since we now have the "load" command.
+
+	sparc-xdep.c:  Use new param-no-tm.h.
+
+	symmisc.c (free_named_symtab):  Add new function from Wind River.
+	However, ifdef it out for now while we think about what it should
+	really be doing.
+
+	tm-sun3.h, xm-sparc.h, xm-sun3.h, xm-symmetry.h: Move
+	PREPARE_TO_STORE to
+	the xm- file, and change its name to CHILD_PREPARE_TO_STORE, since
+	non-Unix-children handle this with their own code in the target
+	transfer vector.
+
+	Makefile.dist:  Roll version to 3.92.3.  Add vx-share stuff to
+	source and target lists.  Add vx-share to default list of include
+	directories.  Add new files to src and target lists: mem-break,
+	target, inftarg, remote-eb, remote-vx, targ-vx.  Be sure the
+	${srcdir} versions of munch and createtags are used.
+
+	* valops.c (find_function_addr):  Split out of call_function.
+	(call_function_by_hand):  Rename call_function; this function 
+	calls functions in the target by laboriously patching the target
+	word-by-word with the right stack, args, regs, etc.
+
+
+Mon Nov  5 17:29:10 1990  John Gilmore  (gnu at cygint)
+
+	Handle AMD 29000 a bit better.
+
+	* remote-eb.c (readchar):  Mask received char log to make it readable.
+	(remote_start):  Pass arguments down to executing program.
+	Make startaddr unsigned.
+	infrun.c (start_inferior):  Accept args, pass them to
+	remote_start.
+	infcmd.c (run_command):  Pass args down to start_inferior.
+
+	* tconfig/am29k-aout, tconfig/am29k-coff:  New files specifying
+	the target object file format.
+	tm-29k.h:  Pay heed to COFF_ENCAPSULATE.
+
+	* am29k-pinsn.c (print_insn):  Print 0x on hex numbers in disassembly.
+	am29k-tdep.c (examine_prologue):  Better checking of function prefixes.
+
+Sun Oct  7 18:20:45 1990  John Gilmore  (gnu at cygint)
+
+	* Makefile.dist (VERSION):  Roll version to 3.91.9 and freeze.
+	* TODO:  We did a few things, we have more to do though.
+
+	* xm-sparc.h (CLEAR_DEFERRED_STORES):  Define.
+	* inflow.c (inferior_died):  Clear deferred stores.
+	
+	* Debug problems with dummy frames and calls to the inferior.
+	* tm-sparc.h (PUSH_DUMMY_FRAME, POP_FRAME):  Move to sparc-tdep.c.
+	* sparc-tdep.c (do_restore_insn):  Simplify.
+	(sparc_frame_find_saved_regs):  Simplify and fix what we find.
+	(sparc_push_dummy_frame):  Simplify and fix what we push.
+	(sparc_pop_frame):  Slightly more hair here, deciding whether
+	we are restoring a saved PC or returning to a return address in %i7.
+	* sparc-xdep.c (read_inferior_registers):  Debug if valid reg is read.
+
+	* utils.c (xmalloc, xrealloc):  Return type depends on __STDC__.
+	* symtab.h (xmalloc): ditto, for obstack_chunk_alloc.
+	* obstack.h (chunkfun): ditto.
+	* defs.h (xmalloc, xrealloc): ditto
+
+	* utils.c (quit):  Grab the terminal from the child if necessary. 
+
+	* inflow.c (term_status_command): Rename to term_info, change
+	to "info terminal".
+
+	* sparc-pinsn.c (print_insn):  Disassembly prefers real instructions.
+	(is_delayed_branch):  Speed up.
+	* sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
+	Still missing some float ops, and needs testing.
+
+	* Support for input and output radixes other than base 10
+	* defs.h (input_radix, output_radix):  Declare.
+	* expread.y (yyparse, parse_number):  Handle changes of input
+	radix, and ambiguous names-or-numbers in radixes >10.
+	* printcmd.c (print_scalar_formatted):  Print formatted hex
+	numbers in varying column widths.
+	* valprint.c (val_print):  Use output_format to print scalar ints.
+	(set_input_radix, set_output_radix, set_radix):  Create.
+	(set_output_radix):  Set output_format from output_radix.
+	(_initialize_valprint):  add `set radix' but leave the others off.
+	
+	* main.c (execute_command): Let stupid questions be turned off.
+	(_initialize_main): Handle "set stupidity", etc.
+
+	* main.c, inflow.c, inferior.h, frame.h, command.c, defs.h, 
+	sparc-pinsn.c, sparc-xdep.c, value.h, valops.c, values.c:  Lint.
+
+Tue Oct  2 11:20:02 1990  John Gilmore  (gnu at cygint)
+
+	* TODO, Makefile.dist, ChangeLog:  Freeze for 3.91.8 release.
+	bfd stuff is still screwed up, but with some manual work, it
+	compiles.
+
+	* breakpoint.c (bpstat_do_actions):  Start over if a command
+	proceeds the inferior, since the inferior will have stopped and
+	will need to have its new stop-actions taken care of.
+
+	* dbxread.c (read_struct_type):  Expression gives Sun3 4.0.3
+	compiler fits, simplify it.
+
+	* gdb.texinfo (directory command): Doc new dir command.
+	source.c (directory_command):  "dir" now puts things on the front
+	of the path, moves dups up front, and handles multiple names
+	on the command line, inserting each one in order.  It also
+	blows away cached line and full_filename info.
+
+	* stack.c (backtrace_command):  Skip "more stack frames follow"
+	unless interactive.
+
+	* Change #ifndef HAVE_VPRINTF to #define MISSING_VPRINTF in
+	xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h, 
+	xm-np1.h, xm-pn.h, xm-pyr.h, xm-symmetry.h, xm-umax.h, xm-vax.h.
+	The only odd one was Gould NP1, which had defined vprintf to
+	"printf"!!!
+
+	* Merge Ted Goldstein <tedg@Eng.sun.com>'s changes for epoch.
+	printcmd.c (print_command_1): Pass 'inspect' flag down as a global
+	variable, inspect_it.
+	valprint.c (print_string, val_print): Use the global inspect_it
+	to indicate whether to print in Epoch style or normal style.	
+
+Mon Oct  1 23:55:26 1990  John Gilmore  (gnu at cygint)
+
+	* printcmd.c (call_command):  add an alias for the "print" command
+	which runs expressions and doesn't print the result if void.
+	(print_command_1): implement it.
+
+	* command.c: Remove #if 0'd code.  Initialize all the fields
+	in add_cmd ().  Rename do_nothing_command to
+	not_just_help_class_command, and make it externally visible.
+	command.h: add user_commands to struct.
+	* main.c (define_command):  Don't overload c->function with a char
+	string as well as a function pointer.
+
+	* eval.c (evaluate_subexp):  Reinstall tiemann changes to
+	calling convention of value_struct_elt () that got dropped in
+	merge.
+
+	* tm-sparc.h (FRAME_FIND_SAVED_REGS):  move to sparc-xdep.c.
+	sparc-tdep.c (sparc_frame_find_saved_regs):  ditto.
+
+	* tm-sparc.h (POP_FRAME): replace some constants with defines.
+
+	* sparc-xdep.c (store_inferior_registers):  defer stores to regs
+	until a good time (e.g. when we are about to run the child),
+	saving ptrace calls.
+    	* infrun.c (proceed):  handle DO_DEFERRED_STORES.
+	* tm-sparc.h: define DO_DEFERRED_STORES.
+
+	* sparc-xdep.c (store_inferior_registers): when storing float
+	registers, don't store stack regs too.  When storing the SP,
+	however, DO store the stack regs too.  This fixes a bug in which
+	the dummy frame is not recognized when a call_function finishes,
+	because its frame pointer (in the stack regs) was never
+	initialized.
+	(read_inferior_registers):  Mark WIM and TBR and FPS and CPS valid
+	even though we don't know how to read them from an inferior.
+	valops.c (call_function):  Comment about storing SP.
+
+	* infrun.c (save_inferior_status): Save away the original bpstat
+	chain so it can be restored later.  Install the copied version for
+	use by whoever saved the status.  It will be blow away by
+	restore_inferior_status, and the original chain restored.  This is
+	important for people who have pointers into the original.
+
+	* breakpoint.c, command.h, copying.awk, dbxread.c, defs.h,
+	findvar.c, frame.h, obstack.h, obstack.c, inflow.c, value.h,
+	main.c, printcmd.c, sparc-tdep.c, symtab.c, valprint.c: lint
+
+
+Fri Sep 28 20:32:46 1990  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.dist: Roll version to 3.91.8.  Add bfd.h and bfdconfig.h
+	temporarily to the makefile.  Add am29k-opcode.h and WHATS.NEW.
+	Add stuff.c and kdb-start.c to the OTHERS list for tar files.
+
+Fri Sep 28 19:12:12 1990  John Gilmore  (gnu at cygint)
+
+	* Merge Mike Tiemann's multiple inheritance changes from Sun.
+	Store the baseclasses in a type struct starting from array element
+	0 rather than from the unusual array element 1.
+
+	dbxread.c: the above.
+	(virtual_context): Add
+	Read new debug information about which virtual function table
+	a virtual function is from, and store it in fn_field.fcontext.
+	
+	symtab.h: Add fcontextt.  Fix baseclass indices.  Typo in
+	TYPE_FN_FIELD_STATIC_P.
+
+	symtab.c: the above.
+	valops.c: the above.  Handle pointer casts of object *'s.
+	(search_struct_method): Add.
+	(value_struct_elt): First arg is now a pointer to a value, and is
+	modified on return.
+
+	valprint.c: the above.
+	values.c (value_virtual_fn_field): Add type arg.  Handle
+	offsetting to the proper object when calling virtual fns.
+	The above.
+	(baseclass_addr): Add valuep arg.
+
+	* README:  Document the current state of BFD config (missing).
+	* TODO, ChangeLog, Makefile.dist: Roll version.
+	* WHATS.NEW: Add summary of changes since 3.5.
+
+Thu Sep 27 16:23:12 1990  John Gilmore  (gnu at cygint)
+
+	* dbxread.c (read_struct_type): Clear bit vectors whenever
+	we allocate one.
+	symtab.c (B_CLRALL): define.
+
+	* tm-sparc.h (STORE_RETURN_VALUE): Avoid clobbering types by
+	using == rather than =.  Huh...  This fixes the dreaded problem
+	wherein builtin_type_int becomes TYPE_CODE_FLT.
+
+	* core.c (info_files): Show the inferior pid.
+
+	* config.gdb: Avoid putting "dir" command into .gdbinit.  GDB
+	already knows how to look in the source directory.
+
+	* Remove psymtab hair from many places.  Remove duplicated code
+	for searching symbol tables.  Hide psymtabs from most places.
+	Make it fast to get from a psymtab to its symtab.
+
+	blockframe.c (blockvector_for_pc): Remove psymtab hair.
+	coffread.c (psymtab_to_symtab): Rename to psymtab_to_symtab2.
+	mipsread.c (psymtab_to_symtab): Rename to psymtab_to_symtab2.
+	dbxread.c: export psymtab_to_symtab, make it work if called N times.
+	(psymtab_to_symtab): Rename to psymtab_to_symtab2.  Initialize
+	new symtab completely.  New psymtabs get symtab pointer
+	initialized to zero.  Remove MI warning printf.  
+	symtab.h: Comments.  Add psymtab to symtab pointer.
+	(PSYMTAB_TO_SYMTAB): New macro.
+	symtab.c: use PSYMTAB_TO_SYMTAB.  Add psymtab_to_symtab and export it.
+	source.c: use PSYMTAB_TO_SYMTAB.  Remove symtab version and
+	compilation fields.
+	stack.c (backtrace_command): Avoid pre-pass to read symbols, if
+	verbose is not set.
+	(print_frame_info): Avoid special-casing symbols that have not yet
+	been read in.
+
+	* source.c (open_source_file): Quick path if we have already
+	located the source file by its full name.
+
+	* symtab.c (lookup_symbol): Use find_pc_symtab rather than
+	find_pc_psymtab.  When a name is found in the misc function
+	vector, search the symbol table for its mangled name, not the
+	name that the user typed.
+
+	* bfd.h: Fix missing comment terminators, make #endifs match.
+
+	* valarith.c (value_less): Handle unsigned int comparisons.
+	Add FIXME about pointer compares, which assume host and target
+	pointers are the same.
+
+	* command.c (do_nothing_command): lint
+	dbxread.c: lint.  Remove sort_syms.  Document C++ visibility info,
+	fix comments on debug symbol format for visibility.  Actually set
+	visibility of symbols.
+	main.c (echo_command): lint; use <readline/history.h>.
+	tm-sparc.h (FRAME_FIND_SAVED_REGS): lint
+	obstack.h (_obstack_blank): Rearrange pointer math to avoid
+	pointing past end of allocated memory; saber complains.
+	obstack.h: Declare the external functions that we use.
+	valarith.h: use <string.h>
+	solib.c (solib_add): lint.
+
+Fri Sep 21 17:05:19 1990  John Gilmore  (gnu at cygint)
+
+	* main.c (initialize_main):  Default info_verbose to off, now that
+	symbol reading is fast.
+	(quit_command):  Avoid clobbering exec_bfd while quitting.
+
+	* Initial BFD (binary file diddling library) merger:
+	coffread.c: Change AOUTHDR to struct exe_hdr.
+	dbxread.c: ditto.
+	core.c: initialize initialized data at compile time.
+	(core_file_command):  Move from coredep.c, convert to bfd.
+	(xfer_core_file): Convert to bfd.
+	exec.c (exec_file_command): use bfd routines.
+	gdbcore.h: BFD.
+	mips-tdep.c: Remove exec_file_command and friends.
+	source.c: bfd.
+	
+	* coredep.c: (fetch_core_registers) Convert core_file_command to
+	fetch_core_registers.
+	mips-xdep.c, sparc-xdep.c, sun3-xdep.c: ditto.
+	
+	* utils.c: (error): Bogus crap, FIXME, to print bfd errors.
+	(my_bfd_read): More bogosity, which I don't think we call.
+	(program_name): Remove this atrocity asap!
+
+Wed Sep 19 13:36:41 1990  John Gilmore  (gnu at cygint)
+
+	* From Per Bothner:
+	values.c: allocate_repeat_value was not clearing the
+	optimized_out field.
+	(value_static_field): minor stylistic fix (wrong macro was used).
+	valops.c (value_struct_elt_for_address): didn't work for C++
+	static fields.
+
+	* signame.c (_initialize_signame):  Initialize signal names once.
+
+	* breakpoint.h, command.c, copying.awk, defs.h, environ.c,
+	exec.c, frame.h, infcmd.c, inferior.h, main.c, munch, sun3-xdep.c,
+	symtab.h, tm-29k.h, valprint.c, value.h, values.c:  Lint.
+
+	* remote-eb.c:  Support user-settable baud rates on the serial port.
+
+	* tm-sun3.h (PREPARE_TO_STORE): fix typo.
+
+Fri Sep 14 13:28:29 1990  John Gilmore  (gnu at cygint)
+
+	* tconfig/sun3os4: Remove warning about native assembler,
+	since it also occurs in the xconfig file.
+
+	* findvar.c (registers): Allocate some slop after `registers'
+	to prevent stray accesses from trashing the next variable.
+
+	* tm-68k.h (REGISTER_BYTES):  Allocate the right number of bytes
+	on the sun-3, by changing the #ifdef from `sun3' (which is not
+	defined by cc) to `sun'.  Symptom was trashed builtin_type_XXX
+	vars, which happened to follow `registers' in the executable.
+
+	* readline/history.c (history_search): Heed gcc-2's advice
+	and parenthesize && inside ||).
+
+	* am29k-opcode.h, am29k-pinsn.c, am29k-tdep.c, remote-eb.c,
+	tm-29k.c:  Insert FSF copyright headers.
+
+	* remote-eb.c:  Better comments.
+
+	* Makefile.dist:  Update to 3.91.6.
+	* TODO: note PREPARE_TO_STORE problem.
+
+Thu Sep 13 09:52:33 1990  Jim Kingdon  (kingdon at cygint)
+
+	* stack.c (frame_info): Only use FRAME_FIND_SAVED_REGS if defined.
+
+	* remote.c:  Wrap the whole file in #if !defined (SPECIAL_REMOTE).
+
+	* infrun.c (wait_for_inferior, at end): Don't set up
+	prev_* if the inferior no longer exists.
+
+	* inferior.h (CALL_DUMMY_LOCATION): New macro, to replace
+	CANNOT_EXECUTE_STACK.
+	valops.c (call_function): Use it.
+
+	* tm-convex.h: Add CALL_DUMMY_LENGTH for use by PC_IN_CALL_DUMMY.
+
+	* inferior.h (PC_IN_CALL_DUMMY): New macro.
+	infrun.c (wait_for_inferior, 2 places): Use it.
+
+	* values.c (value_being_returned): Only use
+	EXTRACT_STRUCT_VALUE_ADDRESS if defined.
+
+	* Move PREPARE_TO_STORE from xm-sun3.h to tm-sun3.h to do the
+	right thing for remote-eb.c.  
+
+	* sun3-xdep.c:  Remove extraneous call to remote_store_registers.
+	* sun386-xdep.c, hp300hpux-xdep.c, sparc-xdep.c:  Ditto.
+
+	* blockframe.c:  Put get_frame_saved_regs inside #if !defined
+	(FRAME_FIND_SAVED_REGS).
+
+	* findvar.c ({fetch,store}_registers): Check for
+	REMOTE_{FETCH_STORE}_REGISTER macro.
+
+	* findvar.c (get_saved_register): Add argument lval and
+	change meaning of argument addr.
+	findvar.c:  Change calls to get_saved_register to reflect
+	new calling convention.
+	valops.c (value_assign): Use get_saved_register instead of
+	find_saved_register.
+
+Sun Sep  2 12:40:20 1990  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* coffread.c (read_one_sym): Make temp_aux an AUXENT, not
+	an (uninitialized) pointer to one.  Use "&" when passing it
+	to fread.
+
+Fri Aug 31 22:57:54 1990  Jim Kingdon  (kingdon at cygint.cygnus.com)
+
+	* coffread.c (getfilename): Use DGUX x_offset and x_name if
+	defined.
+
+	* coffread.c (symbol_file_command): Put semicolon after
+	"int from_tty".
+	Put safe_to_init_tdesc_context in #if defined (TDESC).
+	Put #ifdef TDESCs in 1st column for non-ANSI cpp's.
+	coffread.c: #include <sys/stat.h>.
+	(read_coff_symtab): Typo: in_source_files -> in_source_file.
+	Add missing ')' in check for "lc%" and friends.  Remove
+	extraneous '}'.
+	Declare read_one_sym() at top of file.
+	(read_file_hdr): Put in extra #ifdefs so MC68MAGIC and
+	MC68WRMAGIC can have the same value without causing a duplicate
+	case.
+
+Thu Sep 13 15:55:36 1990  John Gilmore  (gnu at cygint)
+
+	* Allow a Makefile to be built without building the
+	tm and xm file links that screw up builds in subdirectories.
+	This is done with `config.gdb none', then you can do things
+	like `make gdb.tar.Z'.
+	* tconfig/none: Config file for no target system
+	* xconfig/none: Config file for no host system
+	* config.gdb: If no TM or XM files are called out by the
+	host or target file, don't make links for them.
+
+	* cplus-dem.c: Add documentation.
+
+	* dbxread.c (read_ofile_symtab): Turn a fatal error into a
+	simple error, so the user's gdb doesn't crash due to some object
+	file problem (e.g. somebody is rebuilding the file out from under
+	gdb).
+
+	* printcmd.c (print_address_symbolic): demangle the symbol.
+
+	* Makefile.dist (OTHERS): Remove tdesc-lib because it has 
+	Motorola copyrights in it.  Make "make gdb.tar.Z" work.
+	(alldeps.mak): sort and uniq all results from this; duplicates
+	hose gdb.tar.Z link building.  Remove RCS files from
+	tconfig and xconfig.  Add config files for sun386.  Add
+	a few odd files to OTHERS and HFILES.
+
+Mon Sep 10 21:20:24 1990  John Gilmore  (gnu at cygint)
+
+	* Makefile.dist: Pull solib.c to tconfig/sun?os4.
+	Roll version number to 3.91.5.  Make lint work in bindir.
+
+	* README:  Document cross-debugging and new file structure.
+
+	* blockframe.c: Lint.  Include "value.h" to declare read_register.
+	(find_pc_partial_function): remove duplicate line.
+
+	* command.h: Lint.  Declare error_no_arg and dont_repeat.
+
+	* tm-news.h: Remove inadvertently duplicated stuff.
+
+	* mipsread.c: Remove cache_pc_function stuff, now done cleanly.
+	Clean up usage of misc_function_type.  Declare some CORE_ADDRs.
+
+	* config.gdb: Allow `config.gdb host target' form.  Clean
+	up previous change that printed bogus messages when you just said
+	`config.gdb'.
+
+	* core.c: #include "command.h" for lint.
+	* dbxread.c: lint
+	* eval.c: lint
+	* main.c: Remove some casts of enums.  Lint.
+	* source.c: lint
+	* symtab.c: lint
+	* symtab.h: lint
+	* expread.y: lint
+	* valarith.c: lint
+
+	* printcmd.c (initialize_printcmd): Fix thinko in inspect cmd.
+	
+	* sparc-tdep.c (isannulled): Take instruction as parameter, don't
+	read it from memory.  This will allow us to save ptrace calls
+	eventually.   Changed caller single_step too.
+
+	* sparc-xdep.c (fetch_inferior_registers): Avoid reading regs
+	that we aren't going to use, saving many ptrace calls, especially
+	when watchpointing or single stepping.  Use some #define's for
+	constants.
+	(store_inferior_registers): Ditto.
+	(core_file_command): Use some #define's for constants.
+
+	* tm-sparc.h: Add #define's for some register numbers, so we
+	can eliminate the use of random constants in sparc-xdep.c.
+
+	* stack.c (frame_command, print_frame_info, up_command,
+	down_command) Remove frame_changed, since it
+	causes a bug and doesn't seem to do anything useful.  In some
+	places it was used as a flag, in others as a stack level (?).
+
+	* utils.c: Use MISSING_VPRINTF rather than HAVE_VPRINTF, so the
+	default is to use the portable (vprintf) version rather than the
+	kludge version.
+	* xm-news.h (MISSING_VPRINTF): Add.
+
+	* valprint.c (val_print): Demangle fancy vtbl printouts.  Lint.
+
+Sat Sep  8 00:24:12 1990  John Gilmore  (gnu at cygint)
+
+	* Remove stuff that forces -Bstatic linking of gdb, and warnings
+	about linking debugged programs -Bstatic in the sun?os4 config
+	files in tconfig and xconfig subdirectories.
+
+	* main.c (main):  Remove unreached exit(0) now that we exit
+	via quit_command().
+
+	* Create TODO file for online bug list.  There are too many
+	"little" bugs to keep track of on paper.
+
+	* Change Projects file to refer to bug-gdb@cygnus.com
+	rather than kingdon@ai.
+
+Fri Sep  7 23:35:15 1990  John Gilmore  (gnu at cygint)
+
+	* Makefile.dist (VERSION): 3.91.4 now.
+
+	* symtab.c (init_misc_bunches): Rename from init_misc_functions.
+	(condense_misc_bunches): Add sanity check that misc_count is
+	the same as the number of symbols in the bunch.
+	
+	* coffread.c: rename init_misc_bunches.  Pass an argument 
+	to condense_misc_bunches (a zero).
+
+	* dbxread.c (partial_symbol_file_read): Call init_misc_bunches
+	every time we are called; don't rely on our caller to do it.
+	(add_file): Remove call to init_misc_bunches.
+
+	* mipsread.c: Only warn, don't error, if unknown symbol types.
+	This keeps an old gdb from falling on its face if it sees newly
+	extended symbol info.  Rename init_misc_bunches.
+
+Fri Sep  7 22:58:15 1990  John Gilmore  (gnu at cygint)
+
+	* Merge in changes from Per Bothner for DECstations and other
+	MIPS stuff.  The rest is Bothner speaking:
+
+	The next message is a merger of Alessando Forin's mips port with
+	mine.  I've tried to use my good if biased judgment to get
+	the best of both. It *does* need testing.
+
+	Some of the changes are general, *not* mips-specific.
+
+	param.h:
+	Didn't believe in little-endian bit order.
+	There are still inconsistencies about whether flags
+	like BITS_BIG_ENDIAN are integer (#if ...) or
+	boolean (#ifdef ...). I tried to paper over them.
+
+	dbxread.c,coffread.c,mipsread.c,symtab.c,symtab.h:
+	Moved some misc_function code that was common to
+	{dbx,coff,mips}read.c to symtab.c.
+	In the process, I think I cleaned things up a bit.
+	At the same time, moved obsavestring and obconcat to symtab.c.
+
+	dbxread.c:
+	Removed obsolete condense_addl_misc_bunches (use
+	condense_misc_bunches(1) instead).
+
+	exec.c:
+	Needed to include <sys/dir>, at least on DECstations.
+
+	valops.c, mips-tdep.c, tm-mips.h:
+	Added PUSH_ARGUMENTS macro to support funny argument-pushing
+	conventions (when STACK_ALIGN is insufficient).
+	Needed on mips, where doubles need 8-byte alignment,
+	but ints only need 4.
+
+	mips-opcode.h:
+	Removed cruft that was not being used.
+	Merged in many fixes (most from Frank Yellin, fy@lucid.com).
+
+	mips-pinsn.c:
+	Print $ before register-names (I think that makes things a little
+	more consistent).
+	Never print two instructions, even if one delays.
+	Removed hex-disassemble set_cmd.  (This is not mips-specific,
+	so I think the argument is whether it is generally worthwhile or not.
+	I'm inclined to think not, given how easy it is to
+	convert between radixes in gdb.)
+
+	mipsread.c:
+	This is basically Alessando's code.
+	It doesn't use obstacks; I changed it to use obstacks
+	in a few minor places where using malloc causes a
+	memory leak. (Probably, more places could/should be changed.)
+	I added record_misc_function where it was missing.
+	In symbol_file_command and add_file_command, I tried
+	to make the code consistent with more recent versions.
+	Minor sylistic changes in parse_procedure.
+	Make a .gdbinfo. psuedo-symbol point back to the real
+	procedure symbol (using the isym field).
+
+	mips-tdep.c:
+	This is basically from my port, but with a lot of details
+	and a number of routines merged in from Alessando's version.
+	I basically used my code "raw" backtrace (use heuristics
+	from the actual code, rather than symbol table info) - though
+	the idea is Alessandro's. I feel my code is a little cleaner
+	here, particularly in being a little more flexible, such as being
+	able to handle gcc-produced code (which it now can).
+	It also doesn't do frame caching (which is not useful
+	more recent gdb versions).
+	I also used my code for push_/pop_dummy, more or less.
+	I tried to incorporate AF's code for testing sigtramp
+	while backtracing; I probably got it wrong.
+	Added mips_print_register, which tries to scrunch as much
+	information as possible on a screen...
+	Removed the skip-prologue set_cmd. As with hex-disassemble (see
+	under mips-pinsn.c), I don't see anything mips-specific here,
+	and I don't see it being all that useful anyway.
+	
+	tm-mips.h:
+	Added a $fp psuedo-reg distinct from $fp (nice for gcc).
+	Use more register names (rather than hard-cases numbers).
+	
+Thu Sep  6 18:33:15 1990  John Gilmore  (gnu at cygint)
+
+	* Hack up 3.90.11 changes:
+
+	* Makefile.dist (depend): parameterize $(GCC).
+	Add solib.c and solib.o.
+	(readline): Fix vpath for both absolute or relative SRCDIR.
+
+	* blockframe.c: Fix from Schaefer@asc.slb.com for shared libs.
+	Also, let the part I didn't understand at least compile so
+	I can test the rest.  FIXME.
+
+	* dbxread.c: Fix thinko using strcmp.
+	(init_psymbol_list): declare static.
+	(partial_symbol_file_open): Comment cleanups better, avoid
+	cleaning up the string table since the caller will do that.
+	Move the stat for mod time into symbol_file_command, temporarily.
+	(There should be a mod time for each symbol file, eventually,
+	to control its rereading.  FIXME.)
+
+	* infptrace.c (PT_WRITE_D): use same value as PT_WRITE_I for
+	SunOS, which gives error for shared libs otherwise.  (From
+	Schaefer, probably FIXME needs work for portability.)
+
+	* solib.c:  Move #include "param.h" to work.
+	Lowercase all the Uppercase Letters In the Messages.
+	(find_solib): Clean up inferior_so_name for debug printouts.
+	Allow no argument, to mean all shared libraries.
+
+	* symmisc.c: include param.h to get CLEAR_SOLIB.	
+
+Wed Sep  5 18:00:08 1990  John Gilmore  (gnu at cygint)
+
+	* Merge in Kingdon's changes from FSF: the diffs from 3.90.9
+	  to 3.90.11.  ChangeLog entries below are from this.
+
+Wed Jun 13 09:17:39 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* Version 3.90.11.
+
+	* Makefile.dist (HFILES): Add tm-sunos.h.
+
+Tue Jun 12 16:15:26 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.10.
+
+	* Makefile.dist (gdb.tar.Z): Change linking of config so it works.
+
+Thu Jun  7 16:22:27 EDT 1990  Jay Fenlason (hack@ai.mit.edu)
+
+	* sparc-opcode.h  Added single-operand version of rett.
+
+Mon Jun  4 18:12:31 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* m-sparc.h (REG_STRUCT_HAS_ADDR, STRUCT_ARG_SYM_GARBAGE):
+	Put parens around gcc_p in expansion.
+
+Thu May 24 15:44:51 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* utils.c (lines_to_list): Return 10 if lines_per_page == 0.
+
+Wed May 23 16:36:04 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Changes for Sun shared libraries:
+	blockframe.c (find_pc_partial_function): If a non-text symbol
+	is found, set *address = pc - FUNCTION_START_OFFSET.
+	breakpoint.c (insert_breakpoints) [DISABLE_UNSETTABLE_BREAK]:
+	Disable breakpoints instead of giving an error.
+	source.c (select_source_symtab): Initialize cs_pst.
+	symmisc.c: Call CLEAR_SOLIB if defined.
+	symtab.h: Make text{low,high} CORE_ADDR not int.
+	(psymtab): New field addr.
+	solib.c: New file.
+	dbxread.c: Move DECLARE_FILE_HEADERS outside functions.
+	(record_misc_function): Give correct type for N_DATA symbols.
+	(condense_misc_bunches): do "misc_function_count = j" regardless
+	of inclink.
+	Take code which is shared between symbol_file_command and
+	add_file_command and put it into partial_symbol_file_{open,read}.
+	Split add_file_command into add_file_command and add_file.
+	Make psymtab_to_symtab read in the string table if the file
+	is not symfile.
+	Two new parameters to read_dbx_symtab and start_psymtab.
+	tm-sunos.h: New file.
+
+Tue May 22 17:43:03 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* infcmd.c: Change cont_command to continue_command and "cont"
+	to "continue".
+
+Mon May 21 14:41:41 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* breakpoint.c (enable_breakpoint): Get value of watchpoint.
+
+	* defs.h [sparc]: Use <alloca.h> regardless of __GNUC__.
+
+	* values.c (USE_STRUCT_CONVENTION): Check for structures of
+	size 1,2,4,8 rather than size < 8.
+
+	* dbxread.c (dbx_lookup_type): Do f->length *= 2 as many times
+	as necessary, not just once.
+
+	* sparc-opcode.h: Add a bunch of new opcodes which Sun as supports.
+
+Thu May 17 15:04:09 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* {t,x}m-sun386.h, sun386-xdep.c, {x,t}config/sun386
+
+	* tm-news.h: Add CALL_DUMMY_*.
+
+	* tm-68k.h: Remove duplicate comment at FRAME_FIND_SAVED_REGS.
+
+	* config.gdb: In list_host, list_target, use ${i}, not $i.
+
+Tue May 15 21:27:12 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* source.c (find_source_lines) [BROKEN_LARGE_ALLOCA]: Use xmalloc.
+
+	* sparc-opcode.h: Change all store floating-point state register
+	instructions to have the right match & lose fields.
+
+Sat May  5 12:39:18 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist: Move -I${srcdir} to GLOBAL_CFLAGS and pass
+	VPATH to readline.
+	config.gdb: If srcdir != ., create readline directory and
+	copy a makefile into it.
+
+	* wait.h, infrun.c: Change WRETCODE to WEXITSTATUS for
+	consistency with POSIX.
+
+	* breakpoint.c (bpstat_stop_status): Disable watchpoint
+	when we exit its exp_valid_block.
+
+Tue Sep  4 11:46:46 1990  John Gilmore  (gnu at cygint)
+
+	* Makefile.dist: Bump version to 3.91.3.
+
+	* Clean up handling of breakpoint commands (somewhat).
+	  Prompted by Tiemann bug report "cont 10" doesn't work any more.
+
+	  inferior.h: Add breakpoint_proceeded to inferior status struct
+	  and globals; save it and restore it.
+	  (clear_breakpoint_commands): Cleanup, remove old #define.
+
+	  infrun.c (clear_proceed_status): Set breakpoint_proceeded.
+	  (save_inferior_status, restore_inferior_status): handle it also.
+	  (proceed): Remove earlier code that set breakpoint_proceeded.
+	  It is now set only in clear_proceed_status.
+	  (clear_proceed_status): Cleanup, use bpstat_clear rather
+	  than clear_breakpoint_commands.  No callers need the stop_bpstat
+	  between clear_proceed_status and proceed.
+
+	  infcmd.c: Add breakpoint_proceeded definition and comment.
+	  (cont_command, jump_command, signal_command): Move call to
+	  clear_proceed_status right next to call to proceed.
+
+	  breakpoint.c (bpstat_do_actions): Avoid clobbering our
+	  caller's argument while running down the chain of breakpoints.
+	  Use new variable "breakpoint_proceeded" to determine when
+	  a command that it executes moves the inferior past the
+	  breakpoint.
+	  (bpstat_clear): Handle NULL argument.
+	  (bpstat_clear_actions): Avoid useless call to
+	  breakpoint_auto_delete.
+	  (delete_breakpoint):  Clean up bpstat's that are pointing to
+	  the deleted breakpoint from the stop_bpstat chain.
+	  (breakpoint_auto_delete): Simplify.
+
+	* Clean up handling of EOF, error on stdin, etc.  This was
+	  prompted by a network problem that caused gdb to go into an
+	  infinite loop filling up its malloc'd memory.
+
+	  main.c (return_to_top_level): Cleanup: call bpstat_clear_actions,
+	  not clear_breakpoints_commands, which is now gone.
+	  (main): If command_loop returns (e.g. from EOF on stdin), do
+	  a quit_command (looping back to command_loop if quit_command
+	  doesn't really quit).
+	  (command_loop): check result from command_line_input and
+	  exit if it returns NULL, rather than passing the NULL to
+	  execute_command.
+	  (gdb_readline):  Free malloc'd result space before returning
+	  NULL for EOF.
+
+	* utils.c (query): Handle C-d to mean "yes", just as if the
+	  input was not a terminal.  Also avoid infinite loop if EOF
+	  occurs in mid-input-line before newline.  This allows
+	  query to be used at EOF on stdin with reasonable results.
+
+	* infrun.c (proceed): Set breakpoint_proceeded.
+
+	* values.c (value_as_long): Avoid infinite recursion for enums.
+	  (_initialize_values): Fix typo in help msg (kingdon).
+
+	* Makefile.dist (RL_LIB): Use RL_LIB_DEP for dependencies,
+	  RL_LIB for linking.  This allows -lreadline for linking
+	  and nothing for dependencies, once readline is a real library.
+
+	* config.gdb: Jim Kingdon: give useful error message if the
+	  host or target type is not recognized.
+
+	* defs.h (alloca): SPARC <alloca.h> does not declare alloca,
+	  it just defines it.  Dumb, but deal with it.
+
+	* Jim Kingdon suggests:
+	  in xconfig/sun3os4, CFLAGS should be XM_CFLAGS.
+
+Wed Aug 29 18:03:27 1990  John Gilmore  (gnu at cygint)
+
+	* Makefile.dist (VERSION): Bump version # to 3.91.2.
+
+	* Clean up Bothner's changes.
+
+	* blockframe.c (clear_pc_function_cache): New function.
+	* blockframe.c: remake cache_pc_function_* static.
+	* dbxread.c (symbol_file_command): remove references to
+		    cache_pc_function_* variables.
+	* dbxread.c (read_struct_type): Use VOFFSET_STATIC.
+	* printcmd.c: Avoid kludging a global variable (addressprint)
+	  to avoid printing the address of a string twice.  Instead,
+	  pass the format letter 's' down low enough that it can be seen
+	  to avoid this problem.
+	  (print_formatted): Pass format arg to value_print.
+	  (restore_addressprint): Remove function.
+	  (do_examine):  Avoid hacking addressprint, cleanups and such.
+	  (print_frame_args):  Add a comment to a Bothner change.
+	* symtab.h: define VOFFSET_STATIC and use it instead of "-1".
+	* symmisc.c (free_all_symtabs): Call clear_pc_function_cache
+	  to wipe out the values cached in blockframe.c.
+	* symtab.c (find_method): Add comment saying how big you must
+	  allocate to be "big enough".  Per being terse again.
+	* valprint.c (val_print): Handle format letter "s" to print
+	  strings without addresses.  Add comment to vtbl printing code
+	  which casts with wild abandon.  Rearrange reference-printing
+	  code so it prints:
+	       @0xaddr: value		(print w/addressprint)
+	       value			(print w/~addressprint)
+	       @0xaddr			(parameter lists w/addressprint)
+	  or   nothing			(parameter lists w/o addressprint)
+
+Tue Aug 28 10:47:18 1990  John Gilmore  (gnu at cygint)
+
+	* Merge more changes from Per Bothner:
+
+Gdb's handling of TYPE_CODE_REF was so counter-C++ (and otherwise
+annoying) that I tried to improve it. Here are my suggestions.
+
+	These patches all attempt to handle TYPE_CODE_REF (as in C++) better.
+
+	findvar.c:
+	Do automatic de-reference when taking the address of a reference.
+	printcmd.c:
+	Don't deref_ref when printing parameter lists.
+	valops.c:
+	More attempts at treating refernences properly.
+	valprint.c:
+	In val_print, if deref_ref==0, don't print dangling " = ".
+	value.h:
+	Add COERCE_REF macro, which de-references an REF.
+
+	* Merge changes from Per Bothner:
+
+* Fixed (Sony news)-specific configuration problems.
+* Fixed other problems with using vanilla pcc and libc (enum problems;
+assumption that vsprintf exists).
+* Some major speed-ups (finc_pc_partial_function now caches a match;
+parsing avoids duplicate symbol_lookup calls).
+* Changed handling of baseclasses (no longer use baseclasses field
+of struct type, use the first n_baseclasses fields instead).
+* Various minor changes/fixes, most C++-related.
+
+blockframe.c:
+Cache the most previous match from find_pc_partial_function.
+(Save both low and high ends of matching function's pc range.)
+This speeds up the loop of infrun.c:wait_for_inferior quite
+a bit, and makes step/next commands much zippier.
+command.c:
+Added an enum->int cast (otherwise, some compilers barf).
+dbxread.c:
+No longer set baseclass offset to 0, since multiple
+inheritance now mostly works.
+Added a number of casts, to shut up compiler warnings
+(after stabs where made enums, not ints).
+When discarding a symbol table (in symbol_file_command),
+must clear the cache introduced in blockframe.c.
+Don't convert $vtbl_ptr_type to vtbl any more.
+Get rid of TYPE_BASECLASEES and  baseclass_vec (see also symtab.h).
+Mask off sign bit emitted by g++ for virtual table offset.
+Set voffset to -1 (not 1) for static member functions.
+expread.y:
+Changed parsing/lexing of names to avoid doing symbol lookup twice
+(once when lexing to determine symbol class, once for real).
+Now only call symbol_lookup once. Fields of 'this' win especially big.
+printcmd.c:
+Subpress printing addr twice in the case of 'x/s addr'.
+symtab.c:
+lookup_basetype_type is no longer used.
+Add find_methods as recursive helper function to decode_line_1.
+This allows multiple inheritance to work.
+Also, once one or more matches has been found, do not look in
+base-classes. (Baseclass methods would be overridden, anyway.)
+symtab.h:
+Removed baseclasses array in struct type.
+Instead of using baseclasses[i], use fields[i-1].
+Added virtual_field_bits[i] to indicate if the i'th baseclass is virtual.
+Changed sign convention of voffset (previous was inconsistent).
+tm-news.h:
+Some macros (CALL_DUMMY and relatives) were missing. Put them back.
+utils.c:
+Used to assume existence of vsprintf. Re-written to not need it
+if HAVE_VPRINTF is undefined.
+valops.c:
+typecmp was too pessimistic. Made it less so.
+valprint.c:
+Don't print space after address.
+If vtable points to a misc symbol (with 0 offset), print it,
+since that indicates the actual class of the object.
+Changed ype_print_derivation_info to use new inheritance
+scheme (without baseclasses vector).
+values.c:
+In value_primitive_field, fixed some bugs left over from previous set of fixes.
+Also, changes needed because TYPE_BASECLASSES were removed.
+xm-news.h:
+REGISTER_U_ADDR didn't work for PC. Rewrote to use an array.
+
+Tue Aug 21 20:08:54 1990  John Gilmore  (gnu at cygint)
+
+	* source.c:
+  If there is no path set, and the symbols don't indicate what directory
+  a file was compiled in, look in the current directory.  But either
+  a path or a known compilation directory will prevent this.
+
+	* dbxread.c:
+  Three independent bug fixes:
+   * Remove the #if 0 block that breaks some stuff.
+   * SunOS 4.1 fixed the promoted-parameter-wrong-addr bug in Sun C;
+     adapt gdb to either SunOS 4.0.* or 4.1.
+   * MAX_OF_TYPE and MIN_OF_TYPE thinko.  By tedg@sun, I think.
+ 
+	* symtab.c:
+  Instantiate the class T when looking for methods in it.  (Tiemann@sun)
+
+	* valprint.c:
+  (type_print) Demangle the name being printed.
+  (type_print_base) Handle botched demangling without coredump (tiemann).
+
+	* values.c:
+  (check_stub_method):  Document routine.
+			(tiemann) fix bug for no-arg functions
+			Avoid clobbering beyond end of malloc'd storage.
+			Terminate the argument list properly.
+
+Sat Aug 18 01:29:59 1990  Per Bothner (bothner@cs.wisc.edu)
+
+	* Changes merged by John Gilmore:
+    
+breakpoint.c:
+  In breakpoint_1, use new print_address_symbolic instead
+  of find_pc_partial_function. (This forces use of assembler-level
+  addresses, and avoids misleading non-mangled source-level names.)
+cplus-dem.c:
+  Generalize ansi argument such that -1 means skip arglist totally.
+  Removed global variable print_ansi_qualifiers (which made
+  code non-reentrant), in favor of extra explicit arguments
+  to internal routines.
+printcmd.c:
+  Add new helper function print_address_symbolic.
+  Use find_pc_misc_function instead of find_pc_partial_function
+  (since we want assembler-level symbols here).
+stack.c:
+  Print unknown function as just "f (...)", not "f (...) (...)".
+  Use new fputs_demangled explicitly.
+symtab.c:
+  Fixed a typing violation (problem: value.h cannot be imported
+  without renaming many variable in this file).
+  lookup_symbol: If no matching misc_func, look for a C++-mangled name.
+  decode_line_1: Moved forward some never-reached code.
+  Made decode_line_2 skip function prologues correctly.
+utils.c:
+  fputs_filtered should not demangle by default.
+  Add new fputs_demangled to demangle on demand..
+valops.c:
+  Change value_struct_elt to use value_primitive_field (using recursive
+  utility function search_struct_field). This allows foo.bar to work
+  for multiple inheritance (so far only for data fields).
+  Change check_field in the same way (recursive helper function
+  to support multiple inheritance).
+  (Note: there are more of these problems that I haven't fixed.
+  Any code that says TYPE_BASECLASS (t, 1) is probably wrong.)
+  value_of_this: 'this' symbol name is now just "this", note "$this".
+valprint.c:
+  Don't print static members.
+  Avoid printing "members of <type>" if there are none.
+  Simplified type_print_derivation_info by merging duplicate code.
+  Remove useless blank lines in type_print_base (ptype command).
+value.h:
+  Added declaration of new routine value_primitive_field.
+values.c:
+  Added value_primitive_field which is generalized version of
+  value_field that can handle multiple inheritance (non-zero offsets etc).
+  Re-implemented value_field to call value_primitive_field.
+
+Fri Aug 17 23:33:44 1990  John Gilmore  (gnu at cygint)
+
+	* infcmd.c -- insert else to avoid 'delete env' coredump when you
+	delete the whole environment.  Karl Berry reported the bug.
+	* source.c - fix openp to avoid //'s in filenames, which
+	trigger an Emacs bug causing it to not be able to find files
+	when running gdb in a window.
+	* dbxread.c - zap the #if 0 that botches the add-file code.
+	It seems to work a lot better without all the code commented out.
+
+Fri Jul 20 16:58:46 1990  John Gilmore  (gnu at cygnus.com)
+
+	* Merge Tiemann's and Ted Goldstein's changes, detailed below,
+	into gdb-3.90.9.
+
+Tue Jul 17 19:34:33 1990  Ted Goldstein  (tedg at golem)
+
+	* Makefile - added a ${CFLAGS} to a couple of entries,
+	added remote-sa.sparc.c
+	* added remote.sa-sparc.c, a modification of remote.c
+	which conducts a dialog directly with the SparcStation prom.
+	* breakpoint.c, infrun.c, sparcdep.c  added 
+	remote_insert_breakpoint(), and remote_remove_breakpoint() 
+	to breakpoint.c instead of directly writing breakpoint instructions.
+	* sparcdep.c on remote_debugging,there is no need 
+	to remove signle step breakpoint instructions.
+	* main.c added "-epoch" flag and "int epoch_interface" to main.c
+	global variable
+	* printcmd.c - epoch interface sends lisp expressions to open up
+	epoch windows on inspection.
+	* valprint.c - added arrayprint, and addressprint and made adding
+	format controls easier
+	* wait.h added a couple of undef's because we were getting
+	complaints about WSTOPSIG and WTERMSIG begin redefined.
+
+
+Wed Jul  4 05:27:51 1990  Michael Tiemann  (tiemann at masham)
+
+	* symtab.c (decode_line_1): Add support for handling method stubs
+	in the type information.
+
+Tue Jul  3 09:39:18 1990  Michael Tiemann  (tiemann at masham)
+
+	* values.c (baseclass_addr): Run loop from INDEX+1 to
+	N_BASECLASSES; otherwise, we can still get into a loop.
+	@@ This should be restructured to use a cleaner search strategy.
+
+Sun Jul  1 12:28:51 1990  Michael Tiemann  (tiemann at masham)
+
+	* dbxread.c (define_symbol,read_type): Grok GNU C++'s new
+	abbreviation "Tt" for tags which have the same name as their
+	typedecls.
+
+Fri Jun 29 01:03:46 1990  Michael Tiemann  (tiemann at masham)
+
+	* symtab.c (list_symbols): add ability to set breakpoints on all
+	the functions which match a particular regular expression.
+
+Tue Jun 26 04:26:29 1990  Michael Tiemann  (tiemann at masham)
+
+	* cplus-dem.c (cplus_demangle): New parameter ANSI says whether we
+	should print ANSI qualifiers (such as `const' and `volatile').
+	All callers changed to call with ANSI == 1, except from
+	`check_method_stub', which uses old-style syntax.
+
+	* symseg.h (struct fn_field): Remove unneccessary `args' field.
+	* symtab.h (TYPE_FN_FIELD_ARGS): Redefined.
+
+	* values.c (check_stub_method): New function.
+
+	* cplus-dem.c (do_type): Handle "long long" (encoded as 'x').
+
+	* dbxread.c (read_type): Handle new GNU C++ method type stubs.
+	* valprint (type_print_base): Ditto.
+
+	* symtab.c (gdb_mangle_typename): New function.
+
+Tue Jun  5 00:18:43 1990  Michael Tiemann  (tiemann at gzilla)
+
+	* breakpoint.c (catch_command): New function.  Provides a
+	mechanism to set breakpoints based on catch clauses.
+	(disable_catch): Similar, but disables breakpoints on catch
+	clauses.
+	(delete_catch): Similar, but deleted breakpoints on catch clauses.
+
+Sun Jun  3 22:54:08 1990  Michael Tiemann  (tiemann at gzilla)
+
+	* blockframe.c (blockvector_for_pc): New function.
+	* blockframe.c (block_for_pc): Changed to call
+	`blockvector_for_pc' and get the block itself.
+
+	* stack.c (catch_info): New function.  Prints info about
+	exceptions which can be caught in the current frame.
+	* stack.c (print_frame_label_vars): New function.  Similar to
+	`print_frame_local_vars'.
+	* stack.c (print_block_frame_labels): Prints out labels that are
+	defined in this frame.  These labels are exceptions that can be
+	caught.
+
+	* dbxread.c: Updated to handle N_CATCH symtab types.
+
+Thu May  3 22:10:00 1990  Michael Tiemann  (tiemann at teacake)
+
+	* valprint.c (everywhere): TYPE_NAME (TYPE) no longer comes in the
+	form "struct ..." for GNU C++.  Don't flush any part of TYPE_NAME
+	when printing the type.
+
+Wed May  2 22:43:04 1990  Michael Tiemann  (tiemann at teacake)
+
+	* valprint.c (val_print): Use `baseclass_addr' to access the
+	baseclasses pointed to via the derived class object at VALADDR.
+
+	* values.c (baseclass_addr): New function.  Casts derived pointers
+	to baseclass pointers taking virtual baseclasses and multiple
+	inheritance into account.
+
+Sat May  5 12:39:18 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.9.
+
+Fri May  4 12:12:55 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* breakpoint.c (watch_command, bpstat_stop_status): Deal with
+	exp_valid_block field correctly.
+
+	* infrun.c (wait_for_inferior): When checking "don't even think
+	about breakpoints" if stop_signal == SIGTRAP && trap_expected,
+	also check step_resume_breakpoint.
+	Insert breakpoints and continue (not step) if
+	step_resume_break_address != NULL, even if another_trap.
+	If trap_expected and we enter sigtramp, then set up a
+	step_resume_break.
+	If trap_expected is set when we hit the step_resume_break,
+	set another_trap.
+	When calling resume and trap_expected says tell resume to step
+	(2 places), also check step_resume_break_address.
+
+	* infrun.c (wait_for_inferior): Don't set
+	prev_{pc,sp,func_{start,name}} before calling wait ().
+	Do set them after exiting loop.
+	Move their declarations outside functions.
+	(start_inferior): Initialize them.
+
+Thu May  3 00:15:11 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* infrun.c (wait_for_inferior, after check for trap_expected > 1):
+	Restore old code which distinguishes between trap_expected and
+	running_in_shell, just make the latter take any non-TRAP signal,
+	not just SEGV.
+
+	* values.c (allocate_value): Zero VALUE_OPTIMIZED_OUT flag.
+
+	* Makefile.dist (pinsn.o): Use PINSN_CC to compile.
+	xconfig/3b1 (CC,PINSN_CC): Define.
+
+	* xconfig/altos, altos-dep.c: Rename altos-dep.c to altos-xdep.c.
+
+	* Version 3.90.8
+
+	* breakpoint.c (bpstat_stop_status),
+	infrun.c (wait_for_inferior) [SHIFT_INST_REGS]: New code.
+
+	* param.h, tm-88k.h: Define ADDR_BITS_*.
+	infcmd.c (jump_command, read_pc), infrun.c (wait_for_inferior),
+	printcmd.c (do_one_display): Use them.
+
+	* utils.c: Split #ifdef USG into a USG_UTILS and a QUEUE_MISSING.
+	xm-88k.h: Define USG_UTILS.
+
+Wed May  2 00:05:33 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* printcmd.c (printf_command) [__INT_VARARGS_H]: New code.
+	(printf_command): Add from_tty parameter.
+
+	* valprint.c (value_print): Check VALUE_OPTIMIZED_OUT flag.
+
+	* value.h: Add optimized_out field and change lazy field to
+	char.  Add macro VALUE_OPTIMIZED_OUT.
+
+	* i386-pinsn.c: Change from Eirik Fuller to write to stream directly
+	instead of stuffing things in buffers (oappend, etc).
+
+	* breakpoint.c (bpstat_do_actions): If *BSP is set to NULL by
+	execute_command, exit both loops.
+
+	* Makefile.dist: Don't set TARGET_ARCH.  Add .c.o rule.
+
+Tue May  1 17:07:23 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist (RAPP_OBS, rapp),
+	rgdb.c, rserial.c, rudp.c, serial.c, udp.c, xdep.h,
+	remote.h: Added.
+	m68k-xdep.c, coredep.c: Wrap in #if !defined (RDB).
+
+	* valops.c (value_struct_elt), values.c (value_static_field):
+	Change error messages to remove references to `info methods'.
+
+Tue Apr 24 10:25:10 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* More 88k changes:
+	infrun.c (start_inferior): Add START_INFERIOR_HOOK.
+	infcmd.c [SHIFT_INST_REGS]: New code.
+	findvar.c (read_relative_register_raw_bytes): Return a value.
+	infcmd.c (do_registers_info): Check value from
+	read_relative_register_raw_bytes.
+
+	* command.c (delete_cmd): Free the struct cmd_list_element(s)
+	we are removing.
+
+Mon Apr 23 10:42:21 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* More 88k changes:
+	findvar.c (get_saved_register): New function.
+	findvar.c: Rewrite code which called find_saved_register to
+	call get_saved_register instead.
+
+Sun Apr 22 14:47:51 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* valprint.c (val_print): Change error message printed when
+	the type has TYPE_FLAG_STUB set.
+
+	* valprint.c (val_print): Check for TYPE_CODE_UNDEF.
+
+	* findvar.c (write_register): Set register_valid (regno).
+
+	* valops.c (call_function): Check for NULL return from block_for_pc.
+
+Fri Apr 20 11:31:23 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* findvar.c (write_register): Add PREPARE_TO_STORE.
+	{sun3,sparc,symmetry}-xdep.c (PREPARE_TO_STORE): Add.
+	infptrace.c, {mips,pyr,symmetry,sun3,arm,hp300hpux}-xdep.c
+	(store_inferior_registers): Don't call read_register_bytes.
+	symmetry-xdep.c (store_inferior_registers):
+	#if 0 out code to fetch registers.
+
+	* values.c (value_as_long): Call COERCE_ARRAY.
+
+	* tm-sun3.h: Include tm-68k.h not m-68k.h
+
+	* sparc-tdep.c (single_step): Set next_pc, npc4 within
+	if (!one_stepped), not outside it.
+
+	* Changes from Data General for 88k:
+	* coffread.c (read_file_hdr): Add *88*MAGIC.
+	* coffread.c (have_symbol_file_p): New function.
+	* coffread.c [COFF_CHECK_X_ZEROES] [TDESC]: New code.
+	* coffread.c (read_one_sym): If there is more than one
+	aux entry, don't give an error message, just ignore the
+	extra ones.
+	* coffread.c (process_coff_symbol): Replace clipper with
+	BELIEVE_PCC_PROMOTION in #ifdef's.
+	* coffread.c: Define L_LNNO32 if not defined.
+	(enter_linenos): Use it.
+	* blockframe.c: Add INIT_FRAME_PC hook and use it in
+	get_prev_frame_info.
+	m-m88k.h: Use INIT_{FRAME_PC,EXTRA_FRAME_INFO} to do tdesc stuff.
+	Use dummy versions of FRAME_CHAIN_*.
+	* Makefile.dist, xconfig/i386*: Rename M_CLIBS to XM_CLIBS and add
+	TM_CLIBS and CDEPS.
+	tdesc/libdc.o: New target.
+	tdesc.{c,h}, tdesc/*, {t,x}config/m88k: New files.
+
+Thu Apr 12 15:47:00 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* m68k-opcode.h (bras, bsrs): Use "Bw" not "Bg".
+
+Tue Apr 10 20:50:25 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.7.
+
+	* xm-mips.h (BYTE_ORDER): If not defined, make it LITTLE_ENDIAN.
+
+	* mips-xdep.c ({fetch,store}_inferior_registers): Remove variable
+	offset and just use register_addr (regno, 1).
+	(core_file_command): Remove variable reg_offset and just use
+	register_addr (regno, 0).
+
+	* gdbcore.h [COFF_FORMAT]: #undef a_magic before redefining it.
+
+	* infrun.c ("if (trap_expected && stop_signal != SIGTRAP)", near end
+	of wait_for_inferior): Always pass 0 as first arg to resume.
+	#if 0 out "SIGSEGV in shell" test right above it (now redundant).
+
+	* i386-pinsn.c (oappend_address): New function.
+	(oappend): Make it "static void" and declare at top of file.
+	(OP_J, OP_DIR): Use oappend_address.
+
+Mon Apr  9 15:22:09 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* mips-xdep.c: Include <mips/inst.h> not "mips/inst.h".
+
+	* wait.h [HAVE_WAIT_STRUCT]: Put #defines in #if !defined so that
+	it's OK if they are defined in <sys/wait.h>.
+
+	* findvar.c (fetch_registers): Pass "registers", not "&registers",
+	to remote_fetch_registers.
+
+	* mips-tdep.c (_initialize_mipsdep): Remove hex_disassembler
+	and re-write skip_prologue to use add_set_cmd.
+
+	* Makefile.dist (alldeps.mak): Don't put \ after the last
+	filename in each list.
+
+Sun Apr  8 01:59:19 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.6.
+
+	* Makefile.dist (alldeps.mak): "XM_FILE" -> "XM_FILE=".
+
+	* valarith.c (value_x_{un,bin}op): use "operator" not "operator "
+	to match dbxread.c change of 16 Mar 90.
+
+	* valarith.c (value_x_unop): Pass &static_memfuncp,
+	not static_memfuncp.
+
+	* breakpoint.c: Add watchpoint stuff.
+	breakpoint.h: Add bpstat_should_step.
+	infrun.c (proceed, wait_for_inferior): Use it.
+	breakpoint.h: Add bpstat_print (and rename old bpstat_print
+	to bpstat_should_print).
+	infrun.c (normal_stop): Use it.
+
+	* value.h: Add value_free.  Declare a few functions.
+
+Sat Apr  7 21:43:43 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): Remove PROFILE_TYPES code and
+	insert comment suggesting easy shell script equivalents.
+
+	* values.c (unpack_long): Give better error messages for
+	unrecognized sizes of ints and floats.
+
+Fri Apr  6 00:32:21 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c, gdbcore.h (IS_OBJECT_FILE): Check for a_drsize
+	nonzero as well as a_trsize.
+
+	* More places: Use SWAP_TARGET_AND_HOST.
+
+	* valops.c (destructor_name_p): Only skip "struct " if present.
+
+	* main.c (gdb_readline): Return NULL on end of file.
+
+	* sparc-opcode.h: Add jmp 1+2, jmp 1+i, jmp i+1.
+
+	* Makefile.dist: Make expread.tab.c unambiguously be in srcdir.
+
+	* main.c: Split source_command into source_command and
+	read_command_file.
+	(main): Accept "-" as arg to +command for stdin.
+
+	* dbxread.c (psymtab_to_symtab): Don't read string table.
+	(symbol_file_command): Save string table size.
+
+	* Version 3.90.5
+
+	* symtab.c: Remove declaration of lookup_misc_func.
+
+	* mips-pinsn.c: Add use_hex_p stuff (re-worked from Forin stuff).
+
+	* mips-opcode.h: Add bdelay field.
+	mips-pinsn.c: Various changes from Forin, I think to make it look
+	like the MIPS assembler format.
+	mips-tdep.c, mips-xdep.c, mipsread.c: Various changes from Forin.
+
+	* gdbcore.h: Declare register_addr.
+
+	* gdbcore.h: Include <a.out.h>, before trying to redefine N_TXTADDR
+	and friends.
+	various: Don't include both a.out.h and gdbcore.h.
+
+	* Makefile.dist (HFILES): Add param.h
+
+	* utils.c (init_malloc): Moved here from mcheck.c and modified
+	to use the standard mcheck.c
+	Makefile.dist: Modify to reflect new mcheck.
+
+Thu Apr  5 16:38:28 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* valprint.c (val_print, print_hex_chars): Print integers
+	larger than LONGEST.
+
+	* valarith.c (value_sub): Give error message if attempt to
+	subtract something of the wrong type from a pointer.
+
+	* breakpoint.c (bpstat_stop_status): Initialize retval to NULL.
+
+	* i386-tdep.c (i386_pop_frame): Change addr to adr.
+
+Wed Apr  4 05:21:50 1990  Jim Kingdon  (kingdon at teenage-mutant)
+
+	* main.c (command_line_input): return NULL on end of file.
+	(execute_command): If p is NULL, return almost right away.
+	(read_command_lines): Treat end of file like "end".
+
+	* printcmd.c (print_frame_args): Change it so num is number
+	of ints of args, not number of args.
+
+	* xm-*.h: Make sure BYTE_ORDER is defined.
+	Also fix various #includes of old names of things.
+
+	* main.c (command_line_input): Fix comment code of 2 Apr.
+
+	* values.c (value_from_long, unpack_long): SWAP_TARGET_AND_HOST.
+	various: Replace {BYTES,WORDS}_BIG_ENDIAN with TARGET_BYTE_ORDER.
+	valarith.c various: SWAP_TARGET_AND_HOST.
+	dbxread.c (READ_FILE_HEADERS): SWAP_TARGET_AND_HOST.
+	(SWAP_SYMBOL): New macro.  Use it wherever symbuf_idx is incremented.
+	exec.c (exec_file_command): SWAP_TARGET_AND_HOST.
+
+	* valarith.c (value_subscripted_rvalue): Just bcopy() the
+	appropriate bytes rather than playing strange games with
+	value_from_long.
+
+	* param.h (SWAP_TARGET_AND_HOST): New macro.
+
+	* tm-np1.h (V7_REGNUM): Change from 27 to 26.
+	(REGISTER_VIRTUAL_TYPE): Return correct result for vector regs.
+	gould-tdep.c: New file.
+
+	* Move reading of register before store from
+	findvar.c (write_register) to
+	infptrace.c, *-xdep.c (store_inferior_register).
+
+	* findvar.c (fetch_registers, store_registers): New functions.
+	write_register{,_bytes}: Use store_registers regardless of
+	have_inferior_p.
+	registers_valid: New variable.
+	(supply_register, read_register, etc.): Use it.
+	(read_register_gen): New variable.
+	various: Use read_register_gen rather than read_register_bytes
+	where appropriate.
+	*-xdep.c (fetch_inferior_registers): Remove remote_debugging check.
+	infrun.c (wait_for_inferior, start_inferior): Call registers_changed
+	not fetch_inferior_registers.
+	*-xdep.c (fetch_inferior_registers): Call registers_fetched if
+	not setting registers via supply_register, and if fetching
+	all registers.
+	infptrace.c, *-xdep.c (fetch_inferior_registers): Add param,
+	# of register to fetch (-1 for all).
+	infptrace.c, hp300hpux-xdep.c (fetch_inferior_registers):
+	Actually fetch only those registers needed.
+	value.h: Declare all the extern register functions from findvar.c.
+
+	* coffread.c (read_coff_symtab): Test for specific kinds of GCC
+	labels (LI%.*, LPB%.*, etc), not just ??%.*.
+
+	* coffread.c (record_misc_function): Use mf_text not mf_unknown.
+
+	* utils.c,defs.h (lines_to_list): New function.
+	source.c (select_source_symtab, list_command, forward_search_command,
+	reverse_search_command), stack.c (print_frame_info):
+	Use it instead of 10.
+
+	* munch: If MUNCH_NM variable exists, use it.
+
+	* main.c (initialize_main): Set rl_readline_name.
+	main.c: #include readline.h and #undef savestring.
+	Remove declarations of things declared in readline.h.
+
+	* main.c (gdb_readline): If instream == 0, read from stdin.
+
+	* main.c (main): Only call clearerr if ISATTY.  Exit loop if
+	feof (instream).
+
+	* infcmd.c (detach_command): Set inferior_pid to 0 after
+	calling remote_close.
+
+	* main.c (main): If exec and sym files are the same, and there
+	is an error reading execfile, don't try to read sym file.
+
+	* infcmd.c (detach_command) [ATTACH_DETACH]: Don't try to detach
+	from inferior when remote debugging.
+
+	* source.c (reverse_search_command): Change while test from 1 to
+	line > 1.
+
+Tue Apr  3 18:14:14 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.4.
+
+	* Makefile.dist (gdb.tar.Z): Use -z option to tar rather than
+	creating gdb.tar and calling compress separately.
+
+	* breakpoint.c (read_memory_nobpt): Do not treat bcopy as if it
+	returned an "errno" value.
+
+	* various: Make sure gdbcore.h is not included before a.out.h.
+
+	* Makefile.dist (OPCODES): Add mips-opcode.h.
+
+	* config.gdb: Print lists of {hosts,targets} after finding srcdir.
+	When parsing +{host,target}=, strip off +{host,target}=, not +{x,t}m=.
+
+	* Makefile.dist (gdb.tar): Do {t,x}config not just config.
+
+Mon Apr  2 02:42:23 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* sparc-opcode.h (inc): Fix incorrect lose field.
+
+	* valarith.c (value_subscripted_rvalue): Use TARGET_BYTE_ORDER,
+	rather than checking endianness at runtime.
+
+	* main.c (comand_line_input): Accept comments anywhere, not
+	just at starts of lines.
+
+Sat Mar 31 21:59:35 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symtab.c (check_stub_type): Call lookup_symbol with 5 args.
+
+Fri Mar 30 15:23:52 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* frame.h: #include param.h.
+	param.h: Protect against multiple inclusion.
+
+	* i386-tdep.c (i386_get_frame_setup): Fix comment about what
+	opcode 0x55 is.
+	If 0x81 or 0x83 is followed by something besides 0xec,
+	put codestream back where it was and return 0.
+	[USE_MACHINE_REG_H]: Include <machine/reg.h> not <sys/reg.h>
+	Move include of a.out.h above <sys/user.h>.
+	(i386_frame_find_saved_regs): Make locals signed.
+	(i386_frame_find_saved_regs, i386_push_dummy_frame, i386_pop_frame):
+	Use REGISTER_BYTES, REGISTER_RAW_SIZE, etc. to deal with floating
+	point registers.
+
+Wed Mar 28 18:33:40 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* Makefile.dist (OTHERS): Add gdb.dvi.
+	(gdb.dvi): New rule.
+
+	* breakpoint.c (_initialize_breakpoint): Clean up docstrings so
+	as not to mention subcommands (e.g. auto-display).
+	Call add_cmd not add_abbrev_cmd for "disable breakpoint" and
+	put it in class_alias.
+
+	* breakpoint.c (set_breakpoint_count): New function.
+	(set_breakpoint, break_command_1): Use it.
+
+	* breakpoint.c (get_number): New function.
+	(*_command, map_breakpoint_numbers): Use it.
+
+	* infptrace.c (write_inferior_memory): Remove remote_debugging
+	stuff (is handled in core.c).
+	(read_inferior_memory): Remove #if 0'd out remote_debugging code.
+
+Tue Mar 27 16:51:27 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* inferior.h: Include frame.h.
+
+	* findvar.c (write_register): Replace sun4 #ifdef with
+	check of CANNOT_STORE_REGISTER.
+	xm-sparc.h: Define CANNOT_STORE_REGISTER.
+
+	* sparc-tdep.c: Remove superfluous declaration of
+	get_breakpoint_commands.
+
+	* breakpoint.{c,h}: Add bpstat stuff.
+	bpstat_do_action: Re-work do_breakpoint_commands into this.
+	main.c (command_loop): Call bpstat_do_action not
+	do_breakpoint_commands.
+	inferior.h, infrun.c, breakpoint.c, infcmd.c:
+	Rework breakpoint_commands and stop_breakpoint
+	stuff to use bpstat instead.
+
+	* infcmd.c (program_info): "info reg"->"info registers".
+
+	* np1-opcode.h: Renamed from npl-opcode.h.
+	gould-pinsn.c: Include np1-opcode.h.
+	Makefile.dist (OPCODES): Change npl-opcode.h to np1-opcode.h
+
+	* coffread.c (read_enum_type): Stop reading when we hit .eos.
+
+Mon Mar 26 15:52:35 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Version 3.90.3.
+
+	* breakpoint.c (read_memory_nobpt): New function.
+	gdbcore.h: Declare read_memory_{nobpt,check}.
+	mips-tdep.c: Use read_memory_nobpt not breakpoint_shadow_val.
+
+Fri Mar 23 14:26:38 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* inflow.c (terminal_inferior): Reenable commented out
+	inferior_thisrun_terminal check.
+	(terminal_ours_1): If inferior_thisrun_terminal is nonzero,
+	return immediately.
+
+	* Makefile.dist: Rewrite DEPFILES, M_FILE, etc. stuff to deal
+	with host & target separation.
+
+	* config/*: Split into xconfig/* and tconfig/*.
+	*-dep.c: Split into *-xdep.c and *-tdep.c.
+
+	* main.c (main): Always pass two args to xrealloc.
+
+Thu Mar 22 20:29:25 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* Makefile.dist ({,dist}clean): rm {x,t}m.h not param.h
+	xgdb.o: Remove obsolete dependency (now in depend).
+
+	* arm-pinsn.c: Include arm-opcode.h not opcode.h.
+
+	* mips-pinsn.c, mips-opcode.h: New files from Bothner (from
+	release of 24 Jan 90 with mips-opcode.h patch from 1 Feb 90).
+
+	* utils.c (xmalloc): Return NULL on request for 0 bytes.
+
+Wed Mar 21 13:30:08 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* config.gdb: Re-write machine stuff to deal with host & target.
+
+	* xm-altos.h: Don't define HAVE_WAIT_STRUCT.
+
+	* m-*.h: Split into xm-*.h and tm-*.h.
+
+	* infrun.c (wait_for_inferior): Put #ifdef sony_news code
+	in regardless of machine.
+
+	* symtab.c (decode_line_1): Add quotes and capitalize error
+	message "no class, struct, or union named".
+
+	* Makefile.dist (cplus-dem.o): Compile with -Dnounderscore.
+
+	* stack.c (print_frame_info): Use print_symbol to print function name.
+
+	* symtab.c (output_source_filename): Don't print a comma if
+	we are skipping a filename already printed.
+
+Tue Mar 20 10:48:54 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* symtab.c (output_source_filename): Don't print a filename
+	more than once.
+
+	* utils.c (fprint_symbol): New function.
+	defs.h: Decalare it.
+	various: Use fprint_symbol to print symbol names.
+	Makefile.dist (SFILES, OBS): Add cplus-dem.{c,o}.
+
+Mon Mar 19 17:11:03 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* coffread.c (read_file_hdr): Add MC68K??MAGIC.
+
+	* coffread.c (read_coff_symtab): Ignore swbeg and string label
+	symbols.
+
+	* coffread.c (read_coff_symtab): Increment num_object_files
+	in case C_STAT not C_FILE.
+	New variable in_source_file.  Set it in case C_FILE.
+	Check it in case C_STAT.
+
+	* coffread.c [FUNCTION_EPILOGUE_SIZE]: New code.
+	m-umax.h (FUNCTION_EPILOGUE_SIZE): Define.
+
+	* config/3b1: New file.
+
+	* config/sun*: Print message warning people to use GAS with GCC.
+
+Sun Mar 18 02:56:40 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* infcmd.c (run_stack_dummy): Change error message.
+
+	* m-68k.h (REGISTER_VIRTUAL_TYPE): Make pc, fp, sp char *.
+
+	* m-mips.h (LONGEST, BUILTIN_TYPE_LONGEST): Remove.
+
+Sat Mar 17 21:27:49 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* mips-dep.c: Remove infptrace.c stuff.
+
+	* m-bigmips.h: New file.
+	m-mips.h [MIPSEB]: Remove *_BIG_ENDIAN stuff.
+
+	* m-sparc.h (FIX_CALL_DUMMY): Do not insert unimp instruction
+	if function was compiled with gcc.
+
+	* m-mips.h: Remove FIX_CALL_DUMMY_ALIGNED and make FIX_CALL_DUMMY
+	use new args.
+
+	* valops.c (call_function): New args to FIX_CALL_DUMMY.
+	m-*.h (FIX_CALL_DUMMY): Take new args.
+
+	* values.c (using_struct_return): New parameter gcc_p.
+	valops.c (call_function): New variable using_gcc.
+	valops.c (call_function) [REG_STRUCT_HAS_ADDR]: New code.
+
+	* m-mips.h, mips-dep.c: New files from Forin.
+	m-mips.h: Replace RETURN_STRUCT_BY_REF with USE_STRUCT_CONVENTION.
+
+Fri Mar 16 13:17:19 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist: Add some dependencies of m-*.h files.
+	(HFILES): Add m-68k.h.
+
+	* dbxread.c (read_struct_type): Put "operator+" not "operator +"
+	in symtab.
+
+	* core.c: Split read_memory into read_memory_check and read_memory.
+	breakpoint.c (insert_breakpoints): If can't read memory,
+	tell user that error was due to seting breakpoints.
+
+Thu Mar 15 11:47:19 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* infrun.c [COFF_ENCAPSULATE]: Include a.out.encap.h.
+
+	* blockframe.c (FRAMELESS_LOOK_FOR_PROLOGUE): Make it a function.
+	various m-*.h: Call function not macro.
+	frame.h: Declare the function.
+
+Wed Mar 14 02:44:51 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* sparc-dep.c: Include signame.h.
+
+	* sparc-pinsn.c (print_insn): When looking for sethi before
+	delayed branch, call read_memory_noerr not read_memory.
+
+	* m-isi.h, m-sun3.h, m-news.h, m-hp300bsd.h, m-altos.h,
+	m-hp300hpux.h, m-sun2.h: Merge machine stuff except inferior
+	function call stuff into new file m-68k.h.  Create m-3b1.h.
+
+Tue Mar 13 21:34:33 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* inflow.c (new_tty): If can't open tty, print error message
+	before exiting.
+
+	* blockframe.c: Remove declaration of psymtab_to_symtab.
+	symtab.h: Declare psymtab_to_symtab.
+	blockframe.c: Remove declarations of block_for_pc and
+	find_pc_function_start.
+	frame.h: Add declarations of block_for_pc and find_pc_function_start.
+	Remove declaration of nonexistent function find_pc_function.
+	values.c: include frame.h instead of declaring block_for_pc.
+
+	* Version 3.90.2.
+
+Mon Mar 12 14:20:06 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* main.c (main): Delete superfluous "e" from long_options.
+
+Sat Mar 10 15:47:23 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* valprint.c (val_print): Print <%d bit integer> not just
+	<large integer>.
+
+	* dbxread.c (error_type): Fix loop that finds '\0' so that on
+	exit, *pp points to the '\0', not the character after.
+	(read_type): Make sure that places which call read_type and then
+	try to read more input stop immediately with another error
+	upon encountering '\0'.
+
+	* dbxread.c (read_range_type): Fix check for large signed
+	integral type to match comment and reality.  Set TYPE_LENGTH based
+	on n2bits for signed, n3bits for unsigned.
+
+	* infcmd.c (cont_command): Print warning message if we
+	decide to ignore the argument.
+
+	* gdb.texinfo (attach): @xref{Attach} -> @xref{Remote}.
+
+Fri Mar  9 16:26:47 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symtab.h (address_class): Reinstate LOC_EXTERNAL with rewritten
+	comment.
+
+	* expread.y (yyerror, parse_c_1): Make yyerror take a char * arg.
+
+	* main.c (symbol_completion_function): Don't call error() on
+	"info jkldskf".
+
+	* m-npl.h (USE_STRUCT_CONVENTION): Change >= to >.
+
+Thu Mar  8 00:19:01 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symseg.h: Nuke more symseg references including LOC_EXTERNAL.
+	Put contents of	symseg.h into symtab.h and remove symseg.h.
+
+Wed Mar  7 18:02:15 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symtab.h (SYMBOL_LINE): New macro.
+	symtab.c (decode_line_1): Accept variable as well as function.
+	Lookup variable/function in selected block if no file specified.
+	printcmd.c: #if 0 out whereis_command.
+
+	* command.c (do_setshow_command): Call function with additional
+	argument C.
+	main.c (set_history_size_command): Take argument C.
+	(set_verbose): New function to set docstring.
+	(initialize_main): Put set_verbose in command list.
+	command.c (lookup_cmd_1): Accept result_list NULL.
+
+	* valprint.c (_initialize_valprint): Change docstring for
+	"set unionprint" to normal set/show form.
+
+	* command.c (add_show_from_set): Check that docstring starts with
+	"Set " before assuming it does.
+
+	* main.c (show_history): Call cmd_show_list.
+	command.{c,h} (cmd_show_list): New function.
+	command.h: Declare do_setshow_command.
+
+	* command.h (cmd_list_element): New field completer.
+	main.c (symbol_completion_function): Use it.
+	symtab.h: Declare make_symbol_completion_list.
+	command.c (add_cmd): Set completer.
+	main.c, gdbcmd.h (noop_completer): New function.
+	infcmd.c: Set completer for environment functions.
+
+	* symtab.c (types_info, _initialize_symtab): #if 0 out.
+	various: Use fputs_filtered, not fprintf_filtered(%s).
+
+	* valprint.c (type_print_base): Check for integers larger than
+	LONGEST.
+
+	* sun3-dep.c: Include "signame.h" instead of directly declaring
+	sys_siglist.
+
+Tue Mar  6 14:59:34 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* infrun.c (signals_info): Allow argument to be a signal name
+	as well as an expression.
+	(handle_command): Check for error from sig_number.
+
+	* main.c (float_handler): Change error message.
+
+	* inflow.c (create_inferior): If getenv ("SHELL") exists, use it
+	instead of /bin/sh.
+
+	* dbxread.c (read_dbx_symtab, case N_SO): New variable first_symnum.
+	Pass it to {start,end}_psymtab.
+
+	* dbxread.c (read_ofile_symtab): Increment symbuf_idx and symnum
+	when calling process_symbol_pair.
+
+	* symtab.c (sources_info, output_source_filename):
+	Re-write so output_source_filename takes a first parameter
+	instead of a next one.
+
+	* dbxread.c (read_dbx_symtab, case N_SO): When incrementing
+	symbuf_idx, increment symnum also.
+
+	* values.c (set_internalvar_component): Use VALUE_CONTENTS,
+	not VALUE_CONTENTS_RAW.
+
+	* symmisc.c (free_symtab): Don't free filename (now in symbol_obstack).
+
+	* environ.c (init_environ): Copy entire string, including
+	terminating '\0'.
+
+	* value.h, values.c: Rename value_lazy to value_fetch_lazy.
+	values.c (value_of_internalvar): Call value_fetch_lazy.
+
+	* dbxread.c (read_huge_number): Return an error on encountering
+	a large decimal number.
+
+	* dbxread.c (read_huge_number): Reverse sense of overflow test.
+
+	* valprint.c (val_print, case TYPE_CODE_INT): Check for integers
+	larger than LONGEST.
+
+	* dbxread.c (read_ofile_symtab): When calling process_one_symbol,
+	call it with desc and value rather than with bufp->n_{desc,value}.
+
+	* defs.h (LONG_MAX): Define.
+
+	* sun3-dep.c: Declare sys_siglist.
+
+	* infptrace.c: Move include of gdbcore.h after a.out.h
+
+	* Makefile.dist (expread.o, mcheck.o): Remove leading "./" not
+	leading ".".
+
+	* m-hp300hpux.h [!HPUX_VERSION_5]: Define KERNEL_U_ADDR_HPUX.
+	infptrace.c [KERNEL_U_ADDR_HPUX] [KERNEL_U_ADDR_BSD]:
+	Set kernel_u_addr using nlist().
+	m-hp300bsd.h: Define KERNEL_U_ADDR_BSD.
+
+Mon Mar  5 16:52:41 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (read_dbx_symtab): If value of .o symbol is crazy,
+	don't end psymtab.
+
+	* dbxread.c (read_dbx_symtab): Ignore first of a pair of N_SO
+	when both appear.
+	(start_subfile, start_symtab): Extra parameter dirname.
+	(start_subfile): Use obsavestring, not savestring, for name.
+	various: Call start_{subfile,symtab} with extra argument.
+	(end_symtab): Set dirname field in symtab.
+	(read_ofile_symtab): Call process_symbol_pair on pair of N_SO.
+	(process_symbol_pair): New function.
+	symtab.h (symtab): New field dirname.
+	source.c (open_source_file): New function.
+	source.c: Use open_source_file instead of openp where appropriate.
+
+	* defs.h (TARGET_CHAR_BIT): Define.
+
+Sun Mar  4 13:11:48 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (fill_symbuf): Print error messages nicely.
+
+	* Makefile.dist (SFILES): Put standalone.c at end.
+
+	* Makefile.dist (alldeps.mak): Put out backslash after arm-convert.s.
+
+	* symtab.{c,h} (builtin_type_error): New type.
+	symseg.h (type_code): Add TYPE_CODE_ERROR.
+	valprint.c (val_print, type_print_base),
+	values.c (using_struct_return, set_return_value):
+	Check for and deal with TYPE_CODE_ERROR.
+	dbxread.c (error_type): New function
+	(read_type and subroutines): Call error_type instead of error.
+
+	* dbxread.c (read_huge_number): New function.
+	(read_range_type): Use read_huge_number and check results
+	to see if it is a large integral type.
+
+	* symmisc.c: Remove symseg stuff.
+
+	* Gould NP1 changes from (or inspired by) chpmjd@gdr.bath.ac.uk
+	dbxread.c (read_dbx_symtab) [N_NBSTS]:
+	Treat this and N_NBLCS like N_LCSYM, etc.
+	(process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]: New code.
+	m-npl.h (USE_STRUCT_CONVENTION): Add.
+	(IGNORE_SYMBOL): Add 0xa4.
+	(END_OF_TEXT_DEFAULT): Remove.
+	(STRING_TABLE_OFFSET): don't add sizeof(int).
+	[!HAVE_VPRINTF]: Define vprintf to be doprnt, not printf.
+	(BLOCK_ADDRESS_ABSOLUTE): Define.
+	(BREAKPOINT): Pad to size of machine word.
+	(SAVED_PC_AFTER_CALL): Remove ` at start of line (!).
+	(R2_REGNUM): Define.
+	(SP_REGNUM, FP_REGNUM): Switch definitions.
+	(REGISTER_U_ADDR): Use FP_REGNUM in place of SP_REGNUM.
+	(STORE_STRUCT_RETURN, EXTACT_RETURN_VALUE, STORE_RETURN_VALUE,
+	call function stuff):
+	Replace bogus definitions with correct ones for NP1.
+	(CANNOT_EXECUTE_STACK): Define.
+	(FRAME_LOCALS_ADDRESS): Don't add 80.
+	(FRAME_FIND_SAVED_REGS): Also get SP.
+	gould-pinsn.c (findframe): Move framechain declaration outside #if 0.
+	infptrace.c (write_inferior_memory): Check addr against text_end
+	and use PT_WRITE_I or PT_WRITE_D as appropriate.
+	(store_inferior_registers): Don't try to write registers in
+	CANNOT_STORE_REGISTER.
+	m-npl.h (CANNOT_STORE_REGISTER): Define.
+	npl-opcode.h (lil): 0xf8080000 -> 0xf80b0000.
+	
+	* munch: Distinguish between BSD and System V nm by actually
+	seeing what output from nm looks like.
+
+Fri Mar  2 13:43:36 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): Change highest_offset to point
+	to next unprinted arg.
+
+	* main.c (main): Print "type help for list of commands" along
+	with the version.  Follow it with a blank line.
+
+Thu Mar  1 14:49:26 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* valprint.c: Move print_address for function from value_print
+	to val_print.
+
+Wed Feb 28 15:06:12 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist (m-sun4os4.h): Depend on m-sparc.h
+
+	* Makefile.dist (version.c): Depend on Makefile.dist, not Makefile.
+
+	* Makefile.dist: Change MAKEFILES to Makefiles.
+
+	* symtab.h: Declare get_sym_file.
+	core.c: Include symtab.h.
+
+	* Move signal name stuff from utils.c to signame.c
+	Move signal name stuff from defs.h to signame.h.
+	Makefile.dist (SFILES, HFILES, OBS): Add signame.{c,h,o}.
+
+Mon Feb 26 12:03:12 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* command.c (add_cmd): Don't call savestring on name.
+
+Sun Feb 25 15:52:18 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* printcmd.c (print_frame_args): Make highest_offset an int.
+	New variable args_printed.
+	(print_frame_nameless_args): Remove parameter end and add num
+	and first.
+	(print_frame_args): Change call to print_frame_nameless_args.
+
+Fri Feb 23 21:40:15 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* stack.c (up_command, down_command):
+	Only print stack frame if from_tty.
+
+Thu Feb 22 12:01:36 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* expread.y: Inlcude value.h and don't cast return value from
+	lookup_internalvar.
+
+	* infrun.c: Remove code in #ifdef UMAX_PTRACE.
+
+	* values.c (convenience_info): Print in form "$foo = 5".
+	Don't print "Debugger convenience variables:" before first one.
+
+	* Makefile.dist: Remove ADD_FILES from CLIBS.
+	(gdb, kdb, xgdb): Put in ADD_FILES as well as CLIBS.
+
+	* m-pyr.h: #if 0 out call dummy stuff.
+	Put in POP_FRAME which just calls error().
+	valops.c: If CALL_DUMMY is not defined, put in dummy call_function
+	which just prints an error message.
+
+Tue Feb 20 22:11:40 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* breakpoint.c (commands_command): Add arg from_tty.
+
+	* main.c (main): Put if (!setjmp (to_top_level)) around calls
+	to *_command made in response to command line arguments.
+
+Mon Feb 19 13:58:28 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* main.c (main): Use getopt_long_only.  Move one-character options
+	to long_options.  Remove entries which are just unambiguous
+	abbreviations of other options.
+
+	* command.h: Add types cmd_types and var_types.
+	Add fields type, var_type, and var to struct cmd_list_element.
+	command.c (add_set_cmd, add_set_from_show): New functions.
+	(add_cmd): Set c->var_type.
+	(add_abbrev_cmd): Call add_cmd instead of duplicating code.
+	main.c: Add showlist.
+	Move parse_binary_operation from main.c to command.c.
+	command.c (do_setshow_command): New function.
+	gdbcmd.h: New file.
+	Makefile.dist: Add gdbcmd.h.
+	many files: Include gdbcmd.h, use add_set_cmd and add_show_from_set.
+	Replace info * with show * where appropriate.
+	utils.c (fputs_filtered): Use UINT_MAX in lines_per_page to mean
+	no paging.
+	defs.h: Define UINT_MAX.
+	infcmd.c (run_command): Use execute_command, not set_args_command.
+	main.c (execute_command): Call do_setshow_command if necessary.
+	main.c (show_command, show_history): New functions.
+	main.c (initialize_main): Call add_prefix_cmd
+	for show and show history.
+
+	* coffread.c (enter_linenos): Print error if
+	file_offset < linetab_offset.
+
+Sun Feb 18 15:37:05 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* convex-dep.c (comm_registers_info): Fix typo.  ("argc"->"arg").
+
+Wed Feb 14 20:45:14 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* config.gdb: Create Makefile with make.
+
+	* Makefile.dist, config.gdb: Move "srcdir=" line from Makefile.dist
+	to new file Makefile.srcdir.
+
+	* valprint.c: Include <errno.h>.
+
+	* value.h: Declare value_coerce_function.
+
+	* findvar.c: Add missing " after #include "gdbcore.h
+
+	* main.c (main): Re-write command parsing to use getopt.
+	On "gdb +help" print options with '+' not '-'.
+	Makefile.dist: Add getopt.
+
+Tue Feb 13 00:08:27 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist: Add "srcdir=."
+	config.gdb: Edit srcdir= rather than adding it to the beginning.
+
+	* pyr-dep.c: Make global_reg_offset, last_frame_offset not static.
+	Move definition of reg_stack_offset to core.c [REG_STACK_SEGMENT].
+
+	* config/pyramid: Print message about alloca.
+
+	* breakpoint.c (clear_command): When printing "no breakpoint"
+	error, only use arg if non-NULL.
+
+	* core.c (read_memory): Rename to read_memory_noerr.
+	(read_memory): New function which calls read_memory and checks for err.
+	gdbcore.h: Declare all extern core.c functions.
+	move myread from core.c to utils.c.
+	declare it in defs.h.
+	(read_memory_integer): move from infcmd.c to core.c.
+	gdbcore.h: Declare it.
+	Many places: Remove error checking on read_memory, or call
+	read_memory_noerr instead.  Include "gdbcore.h" if calling either.
+
+	* value.h (COERCE_ARRAY): Coerce functions to function pointers.
+	valops.c (value_coerce_function): New function.
+
+	* core.c, convex-dep.c, arm-dep.c (xfer_core_file): Return EIO
+	if address out of bounds.
+
+	* m-arm.h, arm-dep.c arm-pinsn.c arm-opcode.h: New files.
+	dbxread.c, m-convex.h (VARIABLES_INSIDE_BLOCK): Add gcc_p parameter.
+	Makefile.dist (alldeps.mak): Special case for arm-convert.s.
+	dbxread.c (define_symbol): Check for local based on it not
+	being any one of the known deftypes.
+	values.c (using_struct_return): Use new macro USE_STRUCT_CONVENTION.
+
+	* Makefile.dist, config.gdb: Put in srcdir stuff.
+
+Mon Feb 12 22:46:16 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* breakpoint.c: Add addr_string and cond_string fields to
+	struct breakpoint.
+	(break_command_1): Set them.  Use mention ().
+	(mention): Create with code from break_command_1.
+	(breakpoint_re_set): New function.
+	(breakpoint_clear): Remove.
+	(condition_command): Set cond_string.
+	(breakpoint_delete): Free cond_string and addr_string.
+	Declare parse_c_1's type and remove casts to struct expression *.
+	symmisc.c (free_all_symtabs): Don't call breakpoint_clear.
+	dbxread.c, coffread.c (reread_symbols): Call breakpoint_re_set,
+	Include breakpoint.h.
+	breakpoint.h: New file.
+	dbxread.c: Move declaration of symmisc.c functions to symtab.h.
+
+Sun Feb 11 17:29:23 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symtab.c: Make lookup_block_symtab extern.
+	symtab.h: Declare it.
+	valops.c (value_of_this): Use it.
+
+Fri Feb  9 08:59:37 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* config/hp300hpux: Print message telling people to use gcc.
+
+	* value.h: Declare print_floating.
+	printcmd.c (print_scalar_formatted, case 'f'): Use print_floating.
+	valprint.c (val_print, case TYPE_CODE_FLT): Use print_floating.
+	valprint.c (print_floating): Make this function out of is_nan
+	and the code which was in val_print.
+	Put parentheses around high & 0xfffff.
+	Print sign and fraction for NaN's.
+	Print 17 digits not 16 for doubles.
+	(is_nan): Remove.
+	m-news.h, m-sun3.h: Define IEEE_FLOAT.
+
+	* Rename gld-pinsn.c to gould-pinsn.c.
+	config/{pn,npl}: Change name of gld-pinsn.c
+
+Tue Feb  6 00:25:36 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* infptrace.c: Define PT_ATTACH if not defined.
+	m-hp300hpux.h: Define ATTACH_DETACH.
+
+	* main.c (initialize_main): Change alias class to aliases.
+
+	* dbxread.c: Search and destroy references to symsegs.
+	Also remove some #if 0'd code.
+
+	* core.c: Remove reread_exec.
+	dbxread.c (reread_symbols): New function.
+	dbxread.c (symbol_file_command): Set symfile_mtime.
+	coffread.c: Same.
+	infcmd.c (run_command): Call reread_symbols not reread_exec.
+
+	* valprint.c (val_print): When printing string after char *, print
+	it for "" just like any other string.
+
+	* core.c (reread_exec): New procedure.
+	infcmd.c (run_command): Call reread_exec.
+
+	* coffread.c (symbol_file_command): Add from_tty.
+
+	* dbxread.c (symbol_file_command): Only ask about loading new
+	symbol table if from_tty.
+
+Mon Feb  5 02:25:25 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* inflow.c (inferior_died): Call breakpoint_clear_ignore_counts.
+
+	* Makefile.dist (OBS): Remove dbxread.o and coffread.o.
+
+	* config.gdb: Ignore files ending in '#' in config.
+
+	* stack.c (backtrace_command): Add QUIT to get_prev_frame loops.
+
+Sat Feb  3 22:25:09 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* Makefile.dist (YACC): Don't use -v.
+
+Fri Feb  2 19:26:50 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* createtags: Only change .o to .c at end of name.
+
+	* Makefile.dist (alldeps.mak): new target.
+	(Makefile): add alldeps.mak.
+	(SOURCES): remove PINSNS.
+	(TAGFILES: use ALLPARAM.
+	(gdb.tar): add config/.
+
+	* config.gdb: Check for M_FILE= not #param.h
+	config/*: Make sure M_FILE= exists with space after M_FILE=.
+	Makefile.dist (TAGS): Pass M_FILE and DEPFILES.
+	createtags: Change .o to .c.  Remove special tests for dep.c etc.
+
+	* dbxread.c, coffread.c: Don't check COFF_FORMAT and READ_DBX_FORMAT.
+	Makefile.dist: Move {dbx,coff}read.c from SFILES to ALLDEPFILES.
+	config/*: add dbxread.o or coffread.o to depfiles.
+
+	* Makefile.dist (depend): Depend on $(SOURCES), not force.
+
+Thu Feb  1 17:43:54 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* symmisc.c (print_symbol): Print newline after label.
+
+Wed Jan 31 22:35:38 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (read_addl_syms): Remove code that checks for
+	_etext.
+	Move end_of_text_addr into read_dbx_symtab.
+	(read_dbx_symtab): #if 0 out code which checks for _etext.
+
+Tue Jan 30 15:40:19 1990  Jim Kingdon  (kingdon at albert.ai.mit.edu)
+
+	* Makefile.dist (gdb.tar): Use readline's "make readline.tar"
+	instead of having a list of readline files.
+
+	* infrun.c (normal_stop): #if 0 out "you have found a bug in sh".
+
+	* munch (-DSYSV): Check for .text at end of name.
+	Optionally allow extra underscore before initialize.
+	Remove space between #! and /bin/sh.
+
+	* m-merlin.h: Put in clarifying comments about SHELL_FILE.
+	Makefile.dist (install): Execute M_INSTALL.
+	config/merlin: Define M_INSTALL.
+
+Mon Jan 29 04:32:09 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* inflow.c: Change all references to signal handlers from
+	int (*)() to void (*)().
+
+	* main.c: Declare init_signals before use & make it void.
+	Declare initialize_all_files.
+
+	* Makefile.dist (config.status): New target.
+
+Sat Jan 27 00:19:50 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* defs.h (enum command_class): Remove comma after last element.
+
+	* Makefile.dist (gdb.tar.Z): Use compress <foo >bar rather
+	than deleting gdb.tar.Z before starting.
+
+	* dbxread.c (process_one_symbol): Compare context_stack_depth
+	with !VARIABLES_INSIDE_BLOCK, not VARIABLES_INSIDE_BLOCK.
+
+	* mcheck.c: Put whole file in #if defined MALLOC_RANGE_CHECK.
+
+	* mcheck.c (checkhdr): Call fatal_dump_core not abort.
+
+	* mcheck.c: Copy from malloc distribution.
+
+	* main.c (main): Call init_malloc ().
+
+	* main.c (initialize_signals): Rename to init_signals.
+
+Fri Jan 26 00:53:23 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* *dep.c: Make core_file_command return void.
+
+	* gdbcore.h [!KERNEL_U_ADDR]: Declare kernel_u_addr.
+	infptrace.c [!KERNEL_U_ADDR]: Make it extern.
+
+	* altos-dep.c (NBPG, UPAGES): Wrap #define in #if !defined.
+
+	* m-pn.h (GOULD_PN): Define.
+	*-pinsn.c: Include actual opcode table not just opcode.h
+
+	* main.c [ALIGN_STACK_ON_STARTUP]: New code.
+	m-i386.h: Define ALIGN_STACK_ON_STARTUP.
+
+	* m-merlin.h (NO_SIGINTERRUPT, SHELL_FILE): Define.
+
+	* Move code from infptrace [USE_PTRACE_GETREGS] to sun3-dep.c.
+	m-sun{2,3}.h, m-sparc.h: Define FETCH_INFERIOR_REGISTERS.
+
+	* Makefile.dist, config.gdb, config/*:
+	Re-write to use machine-dependent makefiles instead of cpp.
+
+	* m-hp300hpux.h: Define FETCH_INFERIOR_REGISTERS.
+	infptrace.c: Put {fetch,store}_inferior_registers inside
+	#if !defined FETCH_INFERIOR_REGISTERS.
+
+	* Split execcore.c into exec.c and coredep.c.
+	Move a bunch of stuff from coredep.c and *dep.c to gdbcore.h.
+
+	* infptrace.c ({fetch,store}_inferior_registers):
+	Use U_REGS_OFFSET to set offset.
+	m-umax.h: Define U_REGS_OFFSET.
+
+	* m-umax.h: Define PTRACE_{ATTACH,DETACH}.
+
+	* m-i386.h (N_SET_MAGIC): Define.
+	m-i386gas.h: add #undef N_SET_MAGIC.
+
+Thu Jan 25 18:39:45 1990  Jim Kingdon  (kingdon at mole.ai.mit.edu)
+
+	* m-hp300bsd.h: Remove KERNEL_U_ADDR.
+
+	* infptrace.c [!KERNEL_U_ADDR]: Get address of kernel u area
+	at runtime.
+
+	* infptrace.c: Replace numbers with PT_KILL, etc.
+	(store_inferior_registers): Loop for as many words are in the register.
+
+	* infptrace.c [NO_SINGLE_STEP]: Call single_step().
+
+	* kill_inferior{,_fast}: Declare as returning void.
+
+	* m-sun3.h (USE_PTRACE_GETREGS): Define.
+
+	* execcore.c: Add IS_OBJECT_FILE & related stuff.
+
+	* infptrace.c: Include <sys/ptrace.h>.
+	[ATTACH_DETACH] [USE_PTRACE_GETREGS]: New code.
+
+	* Split default-dep.c into infptrace.c and execcore.c.
+
+	* valprint.c [IEEE_FLOAT]: Change void * to char *.
+
+	* breakpoint.c: Change printf_filtered(%s) to fputs_filtered.
+
+Wed Jan 24 00:35:52 1990  Jim Kingdon  (kingdon at pogo.ai.mit.edu)
+
+	* dbxread.c (symbol_file_command): When freeing everything, free
+	the string table too.
+
+	* Makefile.dist (gdb1): add "rm -f gdb1".
+
+	* printcmd.c (print_scalar_formatted): If size is 0, use 'b'
+	'h', 'w', or 'g' depending on the type.
+
+	* stack.c (backtrace_command): Read in symbols for frames we'll
+	print before printing them.
+
+	* valops.c (value_at): Don't print "I/O error" on EIO from
+	ptrace.  Don't print "out of bounds" for any ptrace error
+	except EIO.
+
+	* valprint.c (type_print_base, case TYPE_CODE_ENUM):
+	Print "FOO = 5" not "FOO : 5".
+
+	* symtab.{c,h}: Make lookup_misc_func extern.
+
+	* Makefile.dist: Define VERSION in makefile, and generate
+	version.c automatically.
+	(gdb.tar): Use gdb-$(VERSION), not dist-gdb.
+
+	* expread.y (yylex): Use lookup_primitive_typename to
+	cut down on calls to lookup_symbol.
+	symtab.{c,h} (lookup_primitive_typename): New function.
+	(lookup_typename): Use it.
+
+	* symtab.{c,h} (check_stub_type): New function.
+	valprint.c (type_print_base, val_print, type_print_derivation_info),
+	values.c (allocate_value): Call it.
+
+	* printcmd.c (whereis_command): New function.
+	symtab.c (lookup_symbol): Add symtab parameter.
+	various: Pass additional argument to lookup_symbol.
+	symseg.h (struct symbol): Add line field.
+	dbxread.c (define_symbol): Set sym->line.
+
+	* dbxread.c (symbol_file_command): Read string table into
+	malloc'd memory (symfile_string_table) and leave it there.
+	(psymtab_to_symtab): Use symfile_string_table.
+
+	* utils.c (sig_abbrev): Return NULL if not found.
+	infrun.c (sig_print_{header,info}): Consolidate duplicated
+	code from handle_command, signals_info.
+	(sig_print_info): Just print number if no name from sig_abbrev.
+
+	* Makefile.dist (OTHERS): Add ChangeLog-3.x
+
+	* infrun.c (restore_inferior_status): #if 0 out
+	"Unable to restore previously selected frame" error message.
+
+	* infrun.c (signals_info, handle_command): Print signal
+	abbrevs along with numbers.
+
+	* infrun.c (handle_command): Accept symbol signal names.
+
+	* utils.c (sig_{number,abbrev}, init_sig): New functions.
+	_initialize_utils: Call init_sig for each signal.
+	defs.h: Declare them.
+
+	* default-dep.c (read_inferior_memory): Check quit_flag in
+	fetch loop.
+
+	* Changes for lazy fetching (speeds things up for big objects):
+	value.h (struct value): New field lazy.
+	VALUE_CONTENTS_RAW, VALUE_LAZY, value_at_lazy: New.
+	findvar.c (read_var_value): Set lazy instead of fetching.
+	various: Copy into VALUE_CONTENTS_RAW, not VALUE_CONTENTS.
+	valops.c: Add value_at_lazy, value_lazy.
+	various: Call value_at_lazy instead of value_at.
+
+	* symtab.h (LONGEST): Define.
+
+	* m-*.h (LONGEST, BUILTIN_TYPE_LONGEST): Delete (in symtab.h).
+
+	* infrun.c (wait_for_inferior): #if 0 out stop if ABOUT_TO_RETURN
+
+	* version.c: Change version number to 4.0development
+
+For older changes see ChangeLog-3.x
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-92 b/gdb/ChangeLog-92
new file mode 100644
index 0000000..635c912
--- /dev/null
+++ b/gdb/ChangeLog-92
@@ -0,0 +1,6285 @@
+Thu Dec 31 11:06:38 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (BISON):  Add comment that when bison is used, it
+	must include the "-y" option.
+	* c-exp.y, m2-exp.y (yyrule, yyname, yyss, yyssp, yyvs, yyvsp):
+	Remove defines to remap non-yacc symbols, thus backing out of
+	previous recent changes.  Standard policy is that non-yacc parser
+	generators get fixed, rather than adding bug workarounds in gdb
+	for each new one that pops up.  Expand comment to note this.
+	* c-exp.y, m2-exp.y (YYDEBUG):  Revert back to disabled by default.
+
+Thu Dec 31 09:03:02 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* partial-stab.h (near N_BINCL):  Remove redundant code in N_BINCL
+	case.  Use code in N_SOL.
+
+	* paread.c:  New file that contains all HPPA/HPUX symbol reading
+	code.
+	* dbxread.c:  Remove almost all HPPA/HPUX symbol reading code.
+	* (dbx_symfile_init):  Use sizeof(long) instead of 4.
+	* (dbx_symfile_offsets):  Make static.
+	* (pastab_build_psymtabs):  New interface routine for paread to
+	send stabs into dbxread.
+	* gdb-stabs.h:  Remove gobs of HPPA cruft.
+
+Wed Dec 30 19:47:13 1992  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y, m2-exp.y (yyrule, yyname):  Remap like other yy* names
+	for byacc.
+	* ch-exp.y (yyrule, yyname):  Remap like other yy* names for byacc.
+
+	* c-exp.y, m2-exp.y (yyreds, yytoks):  Remap like other yy* names.
+	* c-exp.y, m2-exp.y (YYDEBUG):  Define if MAINTENANCE_CMDS is defined
+	and YYDEBUG is not already defined.
+	* c-exp.y (strncmp):  Replace throughout with STREQN, missed
+	them during the previous replacements.
+	* printcmd.c (_initialize_printcmd):  Update internal documentation
+	for "set" command to note that the assignment syntax is language
+	dependent.
+	* ch-exp.y (yyreds, yytoks):  Remap like other yy* names.
+	* ch-exp.y (YYDEBUG):  Define if MAINTENANCE_CMDS is defined
+	and YYDEBUG is not already defined.
+	* ch-exp.y (GDB_REGNAME, GDB_LAST, GDB_VARIABLE, GDB_ASSIGNMENT,
+	single_assignment_action): New terminals and nonterminal for gdb
+	extensions to chill expression grammer.
+	* ch-exp.y (match_dollar_tokens):  Lexer routine to match all
+	tokens that start with '$' (register names, convenience vars, etc).
+	* ch-exp.y (tokentab2):  Add GDB_ASSIGNMENT.
+	* ch-exp.y (yylex):  Call match_dollar_tokens.
+
+Mon Dec 28 15:00:01 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* hppah-tdep.c (skip_trampoline_code):  Use new macros for
+	accessing minimal symbol data.
+	* infcmd.c (read_pc):  Use #ifdef, not #if.
+	* symfile.c (syms_from_objfile):  Add CONST to decl for targets.
+	* tm-hppa.h (FIX_CALL_DUMMY):  Use new macros for accessing
+	minimal symbol data.
+
+	* hppah-tdep.c (frame_saved_pc):  Use better test for outermost
+	frame.  Use find_return_regnum to find the caller.
+	* (find_unwind_entry):  New routine to locate stack frame info
+	associated with a procedure.  This looks in the $UNWIND_START$
+	section in the SOM file.
+	* (find_return_regnum):  New routine.  Uses find_unwind_entry() to
+	figure out where the caller's return address is stored.
+	* (find_proc_framesize):  New routine.  Uses find_unwind_entry()
+	to figure out the frame size for a procedure.
+	* (saved_pc_after_call):  New routine, moved from tm-hppa.h.
+	* (init_extra_frame_info):  New routine.  Corrects PC and FP for
+	outermost frame if necessary.
+	* (frame_chain):  New routine, moved from tm-hppa.h.
+	* (skip_trampoline_code):  Handle computed function calls (ie:
+	calls from $$dyncall).
+	* (unwind_command):  Temporary support function to allow user
+	to control/observe aspects of the unwind (stack frame) info.
+	* infcmd.c (read_pc):  (Temporary), put a hack in to see if the PC
+	was in a system call, if so, then read the PC from r31.
+	* tm-hppah.h (SKIP_TRAMPOLINE_CODE, IN_SOLIB_TRAMPOLINE):  Deal
+	with extra arg for skip_trampoline_code().
+	* (INIT_EXTRA_FRAME_INFO):  Define to point at subr (see above).
+	* (FRAME_CHAIN, FRAME_CHAIN_VALID):  Turn into real subroutines.
+	* tm-hppa.h (SAVED_PC_AFTER_CALL):  Turn into real subroutine.
+
+Sun Dec 27 17:34:15 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dbxread.c (dbx_symfile_init, elfstab_build_psymtabs):
+	Call new bfd_get_size() and verify that string table is no larger
+	than the file that is supposed to contain it.
+	* symfile.c (syms_from_objfile):  Only complain about configured
+	NAMES_HAVE_UNDERSCORE differences between gdb and bfd if the
+	current target is the default BFD target.
+
+Sat Dec 26 20:51:41 1992  Fred Fish  (fnf@cygnus.com)
+
+	* solib.c (BKPT_AT_MAIN):  Change to BKPT_AT_SYMBOL.
+	* solib.c (bkpt_names):  New array of symbol names to try to
+	use for the "mapping complete" breakpoint.  Configurable
+	define SOLIB_BKPT_NAME is first one to try.
+	* solib.c (find_solib):  Test debug_base for nonzero rather
+	than just greater than zero.
+	* solib.c (enable_break):  Use bkpt_names to look up address
+	at which to set "mapping complete" breakpoint.
+
+Tue Dec 22 20:33:38 1992  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h (STRCMP, STREQ, STREQN):  New macros.
+	* defs.h (demangle_and_match):  Remove prototype.
+	* dwarfread.c (STREQ, STREQN):  Remove macros, replaced with STREQ
+	  and STREQN defined in defs.h.
+	* dwarfread.c (set_cu_language):  For completely unknown languages,
+	  try to deduce the language from the filename.  Retain behavior
+	  that for known languages we don't know how to handle, we use
+	  language_unknown.
+	* dwarfread.c (enum_type, symthesize_typedef):  Initialize language
+	  and demangled name fields in symbol.
+	* dwarfread.c, mipsread.c, partial-stab.h:  For all usages of
+	  ADD_PSYMBOL_TO_LIST, add language and objfile parameters.
+	* dwarfread.c (new_symbol):  Attempt to demangle C++ symbol names
+	  and cache the results in SYMBOL_DEMANGLED_NAME for the symbol.
+	* elfread.c (STREQ):  Remove macro, use STREQ defined in defs.h.
+	  Replace usages throughout.
+	* elfread.c (demangle.h):  Include.
+	* elfread.c (record_minimal_symbol):  Remove prototype and function.
+	* gdbtypes.h, symtab.h (B_SET, B_CLR, B_TST, B_TYPE, B_BYTES,
+	  B_CLRALL):  Moved from symtab.h to gdbtypes.h.
+	* infcmd.c (jump_command):  Remove code to demangle name and add
+	  it to a cleanup list.  Now just use SYMBOL_DEMANGLED_NAME.
+	* minsyms.c (demangle.h):  Include.
+	* minsyms.c (lookup_minimal_symbol):  Indent comment to match code.
+	* minsyms.c (install_minimal_symbols):  Attempt to demangle symbol
+	  names as C++ names, and cache them in SYMBOL_DEMANGLED_NAME.
+	* mipsread.c (psymtab_language):  Add static variable.
+	* stabsread.c (demangle.h):  Include.
+	* stabsread.c (define_symbol):  Attempt to demangle C++ symbol
+	  names and cache them in the SYMBOL_DEMANGLED_NAME field.
+	* stack.c (return_command):  Remove explicit demangling of name
+	  and use of cleanups.  Just use SYMBOL_DEMANGLED_NAME. 
+	* symfile.c (demangle.h):  Include.
+	* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):  Fix
+	  to match macros in symfile.h and allow them to be compiled
+	  if INLINE_ADD_PSYMBOL is not true.
+	* symfile.h (INLINE_ADD_PSYMBOL):  Default to true if not set.
+	* symfile.h (ADD_PSYMBOL_*):  Add language and objfile parameters.
+	  Add code to demangle and cache C++ symbol names.  Use macro form
+	  if INLINE_ADD_PSYMBOL is true, otherwise use C function form.
+	* symmisc.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+	  Remove, also defined in symfile.c, which we already fixed.
+	* symtab.c (expensive_mangler):  Remove prototype and function.
+	* symtab.c (find_methods):  Remove physnames parameter and fix
+	  prototype to match.
+	* symtab.c (completion_list_add_symbol):  Name changed to
+	  completion_list_add_name.
+	* symtab.c (COMPLETION_LIST_ADD_SYMBOL):  New macro, adds both
+	  the normal symbol name and the cached C++ demangled name.
+	* symtab.c (lookup_demangled_partial_symbol,
+	  lookup_demangled_block_symbol):  Remove prototypes and functions.
+	* symtab.c (lookup_symbol):  Remove use of expensive_mangler,
+	  use lookup_block_symbol instead of lookup_demangled_block_symbol.
+	  Remove code to try demangling names and matching them.
+	* symtab.c (lookup_partial_symbol, lookup_block_symbol):
+	  Fix to try matching the cached demangled name if no match is
+	  found using the regular symbol name.
+	* symtab.c (find_methods):  Remove unused physnames array.
+	* symtab.c (name_match, NAME_MATCH):  Remove function and macro,
+	  replaced with SYMBOL_MATCHES_REGEXP from symtab.h.
+	* symtab.c (completion_list_add_symbol):  Rewrite to use cached
+	  C++ demangled symbol names.
+	* symtab.h:  Much reformatting of structures and such to add
+	  whitespace to make them more readable, and make them more
+	  consistent with other gdb structure definitions.
+	* symtab.h (general_symbol_info): New struct containing fields
+	  common to all symbols.
+	* symtab.h (SYMBOL_LANGUAGE, SYMBOL_DEMANGLED_NAME,
+	  SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME, SYMBOL_MATCHES_NAME,
+	  SYMBOL_MATCHES_REGEXP, MSYMBOL_INFO, MSYMBOL_TYPE):  New macros.
+	* symtab. (struct minimal_symbol, struct partial_symbol, struct
+	  symbol): Use general_symbol_info struct.
+	* utils.c (demangle_and_match):  Remove, no longer used.
+	* valops.c (demangle.h):  Include.	
+	* xcoffexec.c (eq):  Remove macro, replace usages with STREQ.
+	* blockframe.c, breakpoint.c, c-exp.y, c-valprint.c, dbxread.c,
+	  infcmd.c, m2-exp.y, minsyms.c, objfiles.h, solib.c, stack.c,
+	  symmisc.c, symtab.c, valops.c:  Replace references to minimal
+	  symbol fields with appropriate macros.
+	* breakpoint.c, buildsym.c, c-exp.y, c-typeprint.c, c-valprint.c,
+	  coffread.c, command.c, convex-tdep.c, cp-valprint.c, dbxread.c,
+	  demangle.c, elfread.c, energize.c, environ.c, exec.c,
+	  gdbtypes.c, i960-tdep.c, infrun.c, infrun-hacked.c, language.c,
+	  main.c, minsyms.c, mipsread.c, partial-stab.h, remote-es1800.c,
+	  remote-nindy.c, remote-udi.c, rs6000-tdep.c, solib.c, source.c,
+	  sparc-pinsn.c, stabsread.c, standalone.c, state.c, stuff.c, 
+	  symfile.c, symmisc.c, symtab.c, symtab.h, tm-sysv4.h,
+	  tm-ultra3.h, values.c, xcoffexec.c, xcoffread.c:  Replace strcmp
+	  and strncmp usages with STREQ, STREQN, or STRCMP as appropriate.
+	* breakpoint.c, buildsym.c, c-typeprint.c, expprint.c, findvar.c,
+	  mipsread.c, printcmd.c, source.c, stabsread.c, stack.c,
+	  symmisc.c, tm-29k.h, valops.c, values.c:  Replace SYMBOL_NAME
+	  references with SYMBOL_SOURCE_NAME or SYMBOL_LINKAGE_NAME as
+	  appropriate.
+	* buildsym.c (start_subfile, patch_subfile_names):  Default the
+	  source language to what can be deduced from the filename.
+	* buildsym.c (end_symtab):  Update the source language in the
+	  allocated symtab to match what we have been using.
+	* buildsym.h (struct subfile):  Add a language field.
+	* c-typeprint.c (c_print_type):  Remove code to do explicit
+	  demangling.
+	* dbxread.c (psymtab_language):  Add static variable.
+	* dbxread.c (start_psymtab):  Initialize psymtab_language using
+	  deduce_language_from_filename.
+
+Mon Dec 21 22:24:33 1992  Fred Fish  (fnf@cygnus.com)
+
+	* valprint.c (val_print):  Reorganize comment and add note
+	about dependency on target byte ordering.
+	* ch-exp.y (value_array_slice):  Fix typo.
+	* ch-valprint.c (chill_val_print): Remove C'ism that arrays of
+	byte sized ints are assumed to be char strings and printed with
+	string syntax.  In chill, arrays of chars and arrays of
+	bytes/ubytes are distinquishable, and printed appropriately.
+
+Mon Dec 21 18:02:35 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* tm-hppah.h:  #define NEED_TEXT_START_END for target memory
+	read/write routines for HPUX.
+
+	* hppa-pinsn.c (print_insn):  Improve handling of be and ble
+	branch targets to compute target address using const from previous
+	instruction if necessary.
+	* Add `Q' operator to print out bit position field various
+	instructions.
+	* hppah-nat.c:  #include sys/param.h, and sys/user.h.  General
+	cleanups, use new code from Utah.
+	* (store_inferior_registers):  Update to new code from Utah.
+	* (initialize_kernel_u_addr):  Re-enable decl of struct user u.
+	* (fetch_register):  Clear out priv level when reading PCs.
+	* hppah-tdep.c:  Get rid of gobs of KERNELDEBUG stuff.
+	* Remove decl of errno, #include wait.h and target.h.
+	* (frame_saved_pc):  Check `flags' pseudo-register to see if we
+	were inside of a kernel call.  If so, then PC is in a different
+	register.  Also, mask out bottom two bits of all PCs so as not to
+	confuse higher level code.
+	* (push_dummy_frame):  Create from #define in tm-hppa.h.
+	* (find_dummy_frame_regs):  Update from Utah.
+	* (hp_pop_frame):  Create from #define in tm-hppa.h.
+	* (hp_restore_pc_queue):  New, from Utah.
+	* (hp_push_arguments):  Big fixes from Utah.
+	* (pa_do_registers_info, pa_print_registers):  Only print out fp
+	regs upon request.
+	* (skip_trampoline_code):  New routine to deal with stubs that
+	live in nowhereland between callers and callees.
+	* i860-tdep.c:  Remove decl of attach_flag.
+	* infrun.c (wait_for_inferior):  Add new macro
+	INSTRUCTION_NULLIFIED, which can tell if the instruction pointed
+	at by PC will be nullified.  If so, then step the target once more
+	so as to avoid confusing the user.
+	* (just before step_over_function:):  Use stop_func_start, not
+	stop_pc when checking for the existance of line number info.
+	stop_func_start will reflect the proper address of the target
+	routine, not of the stub that we may be traversing to get there.
+	* tm-hppa.h:  define SKIP_TRAMPOLINE_CODE and IN_SOLIB_TRAMPOLINE
+	to deal with the stubs that PA compilers sometimes stick between
+	callers and callees.  Also, define FLAGS_REGNUM for access to the
+	`flags' pseudo-reg.
+	* (REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use
+	memcpy, not bcopy.
+	* (CANNOT_STORE_REGISTER):  New from Utah.  Says that we can't
+	write gr0, PC regs, and PSW!
+	* (FRAME_FIND_SAVED_REGS):  Bug fixes from Utah.
+	* (PUSH_DUMMY_FRAME, POP_FRAME):  Make into real routines in
+	hppah-nat.c.
+	* (CALL_DUMMY, FIX_CALL_DUMMY):  Fixes from Utah.
+	* Define struct unwind_table_entry.
+	* valops.c (call_function_by_hand):  Add another arg to
+	FIX_CALL_DUMMY (under #ifdef GDB_TARGET_IS_HPPA).  Why is this
+	necessary?
+
+Mon Dec 21 02:17:57 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* remote-vx.c: remove include of "symfile.h", replace it with "complaints.h"
+
+Fri Dec 18 10:32:25 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.7.4.
+	* Makefile.in (SFILES_MAINDIR):  Add typeprint.c, c-typeprint.c,
+	  m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c.
+	* Makefile.in (HFILES):  Add valprint.h.
+	* Makefile.in (OBS):  Add typeprint.o, c-typeprint.o,
+	  m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o.
+	* typeprint.c, typeprint.h:  New files for language independent
+	  type printing functions.
+	* c-typeprint.c, m2-typeprint.c:  New files for language dependent
+	  type printing functions and definitions.
+	* valprint.h:  New include file for language independent value
+	  printing definitions.
+	* c-valprint.c, cp-valprint.c, m2-valprint.c:  New files for language
+	  dependent value printing functions.
+	* c-exp.y (production ptype):  Add range_type variable and use new
+	  create_range_type function.
+	* c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab),
+	  infcmd.c (path_var_name), language.c (unk_op_print_tab), 
+	  m2-lang.c (m2_op_print_tab):  Change from ANSI-obsolescent
+	  "const static" to ANSI-conformant "static const".
+	* c-exp.y (c_create_fundamental_type):  Remove unused nbytes.
+	* c-exp.y (c_language_defn, cplus_language_defn):  Add c_print_type,
+	  and c_val_print.
+	* c-lang.h (c_print_type, c_val_print):  Add prototypes.
+	* coffread.c (decode_type):  Add range_type variable and call to
+	  new create_range_type function.
+	* complaints.c (complain):  Remove unused val variable.
+	* complaints.c (_initialize_complaints):  Make it void.
+	* convex-tdep.c (value_of_trapped_internalvar):  Add range_type
+	  variable and call new create_range_type function.
+	* defs.h (enum val_prettyprint):  Move enum from value.h to here
+	  so we can avoid having to include value.h just for prototypes that
+	  need the enum (thanks ANSI).
+	* dwarfread.c (struct_type):  Local anonymous_size variable is
+	  only used if !BITS_BIG_ENDIAN.
+	* dwarfread.c (decode_subscript_data_item):  Add rangetype
+	  variable and call new create_range_type function.
+	* elfread.c (elf_symfile_read):  Remove unused dbx and text_sect
+	  variables.
+	* eval.c (evaluate_subexp):  Remove unused local variable name
+	  and the statement with no side effects that initializes it.
+	* expprint.c (print_subexp):  Change local_printstr to
+	  LA_PRINT_STRING.
+	* gdbtypes.c (create_range_type):  New function that creates
+	  a range type using code fragments from object file readers as
+	  an example of what has to be initialized.
+	* gdbtypes.c (create_array_type):  Removed index_type, low_bound,
+	  and high_bound parameters, replaced with a single range_type
+	  parameter.  Change function body to use passed in range_type
+	  rather than handcrafting one.
+	* gdbtypes.h (create_range_type):  Add prototype.
+	* gdbtypes.h (create_array_type):  Change prototype parameters.
+	* infrun.c (normal_stop):  Remove unused local variables tem and c.
+	* infrun.c (hook_stop_stub):  Return 0 rather than random value.
+	* language.c (unk_lang_print_type, unk_lang_val_print):  Add
+	  stub functions that call error if called.
+	* language.c (unknown_language_defn, auto_language_defn,
+	  local_language_defn):  Add initializers unk_lang_print_type and
+	  unk_lang_val_print.
+	* language.h (struct language_defn):  Reformat for larger
+	  comments, add la_print_type and la_val_print members.  Add
+	  LA_PRINT_TYPE and LA_VAL_PRINT macros.  Change local_printchar
+	  to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING.
+	* m2-lang.c (m2_create_fundamental_type):  Remove unused local
+	  variable nbytes.
+	* m2-lang.c (m2_language_defn):  Add initializers m2_print_type
+	  and m2_val_print.
+	* m2-lang.h (m2_print_type, m2_val_print):  Add prototypes.
+	* main.c (execute_command): Remove unused local variable cmdlines.
+	* main.c (echo_command), stabsread.c (read_type), printcmd.c
+	  (clear_displays), symmisc.c (block_depth), values.c
+	  (clear_value_history):
+	  Make testing of truth value of assignment result explicit.
+	* mipsread.c (upgrade_type):  Update FIXME to include future use
+	  of create_range_type.
+	* printcmd.c (ptype_command, ptype_eval, whatis_command,
+	  whatis_exp, maintenance_print_type):  Move prototypes and functions
+	  to new typeprint.c.
+	* printcmd.c (_initialize_printcmd):  Move add_com calls for
+	  ptype_command and whatis_command to new typeprint.c.
+	* ser-bsd.c (serial_open):  Remove unused variable sgttyb.
+	* source.c (find_source_lines):  Local variable c only used
+	  when LSEEK_NOT_LINEAR is defined.
+	* stabsread.c (read_array_type):  Use new create_range_type
+	  function.
+	* stabsread.c (read_range_type):  Add new index_type variable and
+	  call new create_range_type function rather than handcrafting
+	  range types.
+	* symmisc.c (type_print_1):  Change usages to LA_PRINT_TYPE.
+	* symtab.c (typedef_print usages):  Use c_typedef_print, renamed.
+	* symtab.c (type_print_base usages):  Use c_type_print_base.
+	* symtab.c (type_print_varspec_prefix usages):  Use 
+	  c_type_print_varspec_prefix.
+	* symtab.c (type_print_method_args usages):  Use
+	  cp_type_print_method_args.
+	* valprint.c:  Completely ripped apart and the fragments used
+	  to create c-valprint.c, cp-valprint.c, m2-valprint.c, and
+	  valprint.h.  Remaining stuff is language independent.
+	* value.h (struct fn_field):  Forward declare for prototypes.
+	* value.h (type_print_1):  Remove prototype.
+	* value.h (enum val_prettyprint):  Moved to defs.h.
+	* value.h (typedef_print):  Prototype renamed to c_typedef_print.
+	* value.h (baseclass_offset):  Add prototype.
+	* Makefile.in (SFILES_MAINDIR):  Add ch-typeprint.c, ch-valprint.c.
+	* Makefile.in (OBS):  Add ch-typeprint.o, ch-valprint.o.
+	* ch-typeprint.c:  New file for language dependent type printing.
+	* ch-valprint.c:  New file for language dependent value printing.
+	* ch-exp.y (parse_number):  Remove prototype and stub function.
+	* ch-exp.y (decode_integer_literal):  Removed unused digits and
+	  temp variables.
+	* ch-exp.y (convert_float):  Completely ifdef out for now.
+	* ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5),
+	  ch-lang.c (chill_op_print_tab):
+	  Change from ANSI-obsolescent "const static" to ANSI-conformant
+	  "static const".
+	* ch-exp.y (yylex):  Add unhandled storage class enumeration
+	  literals to switch statement for completeness.
+	* ch-lang.c (chill_create_fundamental_types):  Remove unused
+	  nbytes variable.  Change dummy type to 2 bytes to match int.
+	  Handle FT_VOID types gratuituously added to chill DWARF by
+	  compiler.  Change FT_CHAR case to generate an TYPE_CODE_CHAR
+	  type rather than a one byte TYPE_CODE_INT type.
+	* ch-lang.c (chill_language_defn):  Add chill_print_type and
+	  chill_val_print.
+	* ch-lang.h (chill_print_type, chill_val_print):  Add prototypes.
+
+Thu Dec 17 00:44:57 1992  John Gilmore  (gnu@cygnus.com)
+
+	Eliminate uses of NAMES_HAVE_UNDERSCORE, using
+	bfd_get_symbol_leading_char instead.
+
+	* coffread.c (EXTERNAL_NAME):  New macro for removing possible
+	leading character from names.
+	(read_coff_symtab):  Use BFD's FILE *, don't open a second one.
+	(process_coff_symbol, coff_read_struct_type, coff_read_enum_type):
+	Replace NAMES_HAVE_UNDERSCORE with EXTERNAL_NAME.
+
+	* kdb-start.c (main):  Remove NAMES_HAVE_UNDERSCORE.
+	* minsyms.c (install_minimal_symbols):  Replace NAMES_HAVE_UNDERSCORE.
+	Remove SOME_NAMES_HAVE_DOT support (apparently unused).
+	* partial-stab.h:  Replace NAMES_HAVE_UNDERSCORE.
+	* solib.c:  Replace NAMES_HAVE_UNDERSCORE.
+	* stabsread.h:  Remove NAMES_HAVE_UNDERSCORE and HASH_OFFSET.
+	* symfile.c (syms_from_objfile):  Insert debugging check to test
+	NAMES_HAVE_UNDERSCORE setting against the BFD support.
+
+	* doc/gdbint.texinfo (Host Conditionals):  Remove
+	NAMES_HAVE_UNDERSCORE, SOME_NAMES_HAVE_DOT, document
+	MEM_FNS_DECLARED.
+	(Target Conditionals):  Remove all of the above.
+
+	* xm-rs6000.h (MEM_FNS_DECLARED):  Update comments.
+
+	* coffread.c (read_coff_symtab, C_BLOCK):  Use complain() rather
+	than error() for .bb/.eb.  Bug found by Eddie Fung, <efung@cs.uq.oz.au>.
+
+Tue Dec 15 10:05:56 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* coffread.c (decode_type): catch negative tagndx fields generated
+	by SCO 3.2v4 cc.
+	* exec.c: comment out string following #endif.
+	* configure.in (i[34]86-*-sco3.2v4*): use host i386sco4.	
+	* xm-i386sco.h: include <sys/types.h> and <sys/dir.h>, required by
+	<sys/user.h>.
+	* config/i386sco4.mh: new file; like i386sco.mh, but don't require
+	gcc, and define const to empty to avoid SCO 3.2v4 cc bug.
+
+Tue Dec 15 04:14:24 1992  Fred Fish  (fnf@cygnus.com)
+
+	* complaints.c:  New file, code moved from utils.c.
+	* complaints.c (complain):  Made into a varargs function.
+	* complaints.h:  New file, code moved from symfile.h.
+	* Makefile.in (SFILES_MAINDIR):  Add complaints.c.
+	* Makefile.in (HFILES):  Add complaints.h.
+	* Makefile.in (OBS):  Add complaints.o.
+	* symfile.c (complaint_root, stop_whining, complaint_series,
+	complain, clear_complaints, add_show_from_set for stop_whining):
+	Moved to complaints.c.
+	* symfile.h (struct complaint, complaint_root decl, complain
+	prototype, clear_complaints prototype):  Moved to complaints.h.
+	* buildsym.c, coffread.c, dbxread.c, dwarfread.c, elfread.c,
+	gdbtypes.c, mipsread.c, stbsread.c, symfile.c:  Include
+	complaints.h.  Remove casts from arguments to complain(),
+	which is now a varargs function, and remove unnecessary
+	placeholder zero args.
+	* defs.h (begin_line):  Add prototype.
+	* defs.h (vprintf_filtered):  Add prototype.
+	* dwarfread.c (varargs.h):  Remove, no longer needed.
+	* dwarfread.c (dwarfwarn):  Remove prototype and function.
+	* dwarfread.c (complaints):  Define a bunch of complaints.
+	* dwarfread.c (SQUAWK):  Remove macro defs, convert all
+	usages to standard complain() calls.
+	* utils.c (begin_line):  New function that ensures that
+	whatever gets filter-printed next starts on its own line.
+	* utils.c (vprintf_filtered):  New func, like vfprintf_filtered,
+	but to stdout (calls vfprintf_filtered internally).
+
+Tue Dec 15 02:01:00 1992  John Gilmore  (gnu@cygnus.com)
+
+	* remote.c:  Avoid printf_filtered line limit.  Suggested by
+	Robert R. Henry, <rrh@tera.com>.
+	* infcmd.c (environment_info):  Ditto, for Don Allen <allen@think.com>.
+
+	* main.c (main):  Accept --silent as well as --quiet.  Change +help
+	to --help.  Suggested by Karl Berry, <karl@cs.umb.edu>.
+
+	* doc/gdbint.texinfo:  SWAP_HOST_AND_TARGET => SWAP_TARGET_AND_HOST.
+	Noticed by Andy Jackson, <arj@cam-orl.co.uk>.
+
+Mon Dec 14 23:28:15 1992  John Gilmore  (gnu@cygnus.com)
+
+	* tm-nindy960.h, remote-nindy.c:  Lint.
+
+Mon Dec 14 18:48:52 1992  Fred Fish  (fnf@cygnus.com)
+
+	* gdbtypes.c (create_array_type):  Complete rewrite.  Now requires
+	a optional type to decorate as an array type, the type of the
+	index, and the bounds of the array.  Records this additional info
+	in the array type for use with languages with nonzero array
+	bounds.
+	* gdbtypes.h (enum type_code):  Update comment for TYPE_CODE_ARRAY
+	to note that arrays may have bounds.
+	* gdbtypes.h (create_array_type):  Update prototype.
+	* c-exp.y (ptype production):  Adjust for new create_array_type
+	calling conventions.
+	* coffread.c (decode_type):  Call create_array_type rather than
+	handcrafting array types.
+	* convex-tdep.c (value_type):  Remove, now use create_array_type.
+	* convex-tdep.c (value_of_trapped_internalvar):  Convert calls to
+	vector_type into calls to create_array_type.
+	* dwarfread.c (decode_subscr_data):  Name changed to
+	decode_subscript_data_item throughout.
+	* dwarfread.c (decode_subscript_data_item):  Rewrite to use
+	create_array_type.  Now records index type and range as well.
+	* dwarfread.c (dwarf_read_array_type):  Rewrite as part of
+	change to use create_array_type.
+	* dwarfread.c (read_subroutine_type):  Test existing user defined
+	types before decorating them, to ensure they are blank, and
+	complain about it if they are not.
+	* dwarfread.c (decode_fund_type):  For unrecognized types, always
+	return some valid type (type integer).  If the unrecognized type
+	cannot be an implementation defined type, complain as well.
+	* m88k-tdep.c (pushed_size):  Update comment for TYPE_CODE_ARRAY.
+	* m88k-tdep.c (store_param):  Update comment for TYPE_CODE_ARRAY.
+	* mipsread.c (upgrade_type):  Add FIXME comment that code to
+	handcraft arrays should be replaced with call to create_array_type.
+	* stabsread.c (read_array_type):  Replace code to handcraft
+	array types with call to create_array_type.
+	* valprint.c (type_print_varspec_prefix):  Minor formatting
+	change, join lines that don't need to be split.
+
+Mon Dec 14 17:18:42 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* convex-xdep.c, hppab-nat.c, infptrace.c:  Remove
+	decl for attach_flag, it now lives in inferior.h.
+	* hppa-pinsn.c:  Reformat opcode tables.  Add function prototypes.
+	Make most functions static.
+	* hppah-nat.c:  General cleanups, remove BSD specific code (since
+	that all lives in hppab-nat.c).
+	* hppah-tdep.c (frame_chain_valid), tm-hppa.h (FRAME_CHAIN):
+	Change sense of test against inside_entry_file().  This fix is
+	from U. of Utah.
+	* tm-hppa.h (PUSH_DUMMY_FRAME, POP_FRAME):  Use char * for 2nd arg
+	to read/write_register_bytes().
+	* gdbtypes.h:  Remove const from decl for cplus_struct_default to
+	work around PA-GAS assembler bug.  Also, add trailing */ to some
+	comments.
+	* gdbtypes.c:  Remove const from decl for cplus_struct_default.
+	Same reason as above.
+
+Wed Dec  9 19:53:25 1992  John Gilmore  (gnu@cygnus.com)
+
+	* mipsread.c (parse_symbol): When checking whether a structured
+	type is an enum, check qualifiers of its first member, as well as
+	the base type of the member.  Bug found and fixed by John M.
+	Farrell, <farrell@fjord.reo.dec.com>.
+
+	* vx-share/{reg.h,xdr_regs.h,xdr_regs.c}:  Remove, unused.
+	* remote-vx.c:  Don't include vx-share/reg.h.
+	* vx-share/ptrace.h:  Reproduce from scratch.
+	* config/{vxworks68,vxworks960}:  Don't include xdr_regs.o.
+	* Makefile.in:  Remove references to removed files, and to removed
+	29k-share directories.
+
+Tue Dec  8 13:30:58 1992  Fred Fish  (fnf@cygnus.com)
+
+	* c-lang.c (_initialize_c_language):  Name changed from
+	_initialize_c_exp.
+	* m2-lang.c (_initialize_m2_language):  Name changed from
+	_initialize_m2_exp.
+	* m2-lang.c (_initialize_m2_language):  Change malloc to xmalloc since
+	it is no longer inside m2-exp.y, where it was remapped by Makefile.
+	* c-exp.y, m2-exp.y:  Migrate code that has nothing to do with
+	expression parsing into c-lang.c and m2-lang.c respectively.
+	* c-lang.c, m2-lang.c:  New files, code migrated from c-exp.y and
+	m2-exp.y respectively.
+	* c-lang.h, m2-lang.h:  New files, internal interfaces between c-*
+	and m2-* files respectively.
+	* Makefile.in (SFILES_MAINDIR):  Add c-lang.c, m2-lang.c.
+	* Makefile.in (HFILES):  Add c-lang.h, m2-lang.h.
+	* Makefile.in (OBS):  Add c-lang.o, m2-lang.o.
+	* expression.h (struct block):  Forward declaration for prototypes.
+	* language.h (struct objfile):  Forward declaration for prototypes.
+	* Makefile.in (SFILES_MAINDIR):  Add ch-lang.c.
+	* Makefile.in (HFILES):  Add ch-lang.h.
+	* Makefile.in (OBS):  Add ch-lang.o.
+	* ch-exp.y:  Migrate code that has nothing to do with expression
+	parsing into ch-lang.c.
+	* ch-lang.c:  New file, code migrated from c-exp.y.
+	* ch-lang.h:  New file, internal interface between ch-* files.
+	* ch-lang.c (_initialize_chill_language):  Name changed from
+	_initialize_chill_exp.
+
+	Changes for Amiga Unix from rhealey@ub.d.umn.edu.
+	* config/amix.mh (NAT_FILE):  Add, set to nm-sysv4.h.
+	* config/amix.mh (NATDEPFILES):  Add.
+	* config/amix.mh (XDEPFILES):  Move procfs.o and fork-child.o
+	to NATDEPFILES.
+
+	* dwarfread.c (decode_subscr_data):  Remove spurious test that
+	accepted only integer subscript types.  We don't do anything
+	with the type at the moment anyway.
+
+Fri Dec  4 06:56:56 1992  Fred Fish  (fnf@cygnus.com)
+
+	* ch-exp.y (match_character_literal):  Fix case where no
+	match at all is found.
+	* ch-exp.y (chill_create_fundamental_type):  Chill uses fixed
+	width types.  For example, "INT" is always 2 bytes regardless
+	of the values of any TARGET_*_BIT macros.  So use explicit
+	numeric sizes for the types.
+
+Thu Dec  3 12:00:06 1992  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (c_create_fundamental_type):  New function to create
+	language specific fundamental types for C.
+	* m2-exp.y (m2_create_fundamental_type):  New function to create
+	language specific fundamental types for Modula 2.
+	* c-exp.y (c_language_defn, cplus_language_defn):  Add
+	c_create_fundamental_type to language struct initializers.
+	* m2-exp.y (m2_language_defn):  Add m2_create_fundamental_type
+	to language struct initializers.
+	* dwarfread.c (expression.h, language.h):  Include.
+	* dwarfread.c (ftypes):  New array to hold fundamental types
+	for current compilation unit.
+	* dwarfread.c (cu_language_defn):  New pointer to language
+	struct for language of current compilation unit.
+	* dwarfread.c (dwarf_fundamental_type):  New function to
+	create/lookup fundamental types.
+	* dwarfread.c (set_cu_language):  Initialize cu_language_defn.
+	* dwarfread.c (throughout):  Replace lookup_fundamental_type
+	with dwarf_fundamental_type.
+	* dwarfread.c (read_file_scope):  Zero out ftypes for each new
+	compilation unit (may be different language or different objfile).
+	* gdbtypes.c (lookup_fundamental_type):  Move actual type
+	creations into language specific fundamental type creation
+	functions and call via create_fundamental_type.  Add comment
+	about this function being obsolescent.
+	* gdbtypes.h (FT_BYTE, FT_UNSIGNED_BYTE):  New types, true byte
+	sized signed and unsigned integers.
+	* gdbtypes.h (FT_NUM_MEMBERS):  Increment, new types added.
+	* language.c (language_def):  New function to lookup a language
+	struct given it's enumeration.
+	* language.h (struct language_defn):  Add la_fund_type, a pointer
+	to a function that creates fundamental types for this language.
+	* language.h (create_fundamental_type):  New macro to create
+	fundamental types based on the current language.
+	* language.h (language_def):  Add prototype.
+	* language.c (unk_lang_create_fundamental_type):  New function
+	for initializing language structs, calls error if called.
+	* language.c (unk_language_defn, auto_language_defn, 
+	local_language_defn):  Use unk_lang_create_fundamental_type.	
+	ch-exp.y (chill_create_fundamental_type):  New function.
+	ch-exp.y (chill_language_defn):  Add chill_create_fundamental_type.
+	ch-exp.y (_initialize_chill_exp):  BOOL types are only one byte.
+
+Tue Dec  1 17:07:31 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (CHILL_PRODUCER):  Add producer string for
+	GNU chill.
+	* dwarfread.c (handle_producer):  Test CHILL_PRODUCER as well
+	as GCC_PRODUCER and GPLUS_PRODUCER.
+
+Mon Nov 30 18:46:58 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* remote-udi.c (udi_wait):  Don't stop if TIP says that remote is
+	still running.
+
+Mon Nov 30 12:00:25 1992  Fred Fish  (fnf@cygnus.com)
+
+	* tm-sun4sol2.h:  Add CPLUS_MARKER.  Solaris 2.0 requires '.'
+	rather than '$'.  This particular piece of braindamage is
+	spreading like ooze. It's now infected libiberty, deja-gnu,
+	gdb, and gcc.
+	* values.c (baseclass_addr):  Use CPLUS_MARKER rather than
+	hardwired '$' character.
+
+Sun Nov 29 15:22:42 1992  Fred Fish  (fnf@cygnus.com)
+
+	(Changes to break incredibly ugly, unmaintainable 750 line
+	 read_struct_type function up into managable pieces.)
+	* Makefile.in (VERSION):  Bump to 4.7.3.
+	* stabsread.c (struct field_info):  Local struct definition.
+	* stabsread.c (read_member_functions, read_struct_fields,
+	read_baseclasses, read_tilde_fields, attach_fn_fields_to_type,
+	attach_fields_to_type, read_cpp_abbrev):  Prototypes and new
+	functions from fragmented read_struct_type.
+	* stabsread.c (stabs_general_complaint):  Catchall complaint.
+	* stabsread.c (STABS_CONTINUE):  Macro'ize cretinous stabs
+	symbol name continuation code.  Use macro throughout.
+	* stabsread.c (various places):  Replace add-one-to-pointer
+	with pointer increment.
+	* stabsread.c (read_type):  Retain function local copy of type
+	descriptor.  Rearrange code calling read_struct_type() to match
+	new conventions.
+	* stabsread.c (define_symbol):  For the sake of dbx, gcc emits
+	a single blank as the name of nameless enumerations.  Recognize
+	this special case and set nameless flag.
+	* ch-exp.y (GENERAL_PROCEDURE_NAME, LOCATION_NAME):  New
+	terminal tokens.
+	* ch-exp.y (access_name):  New non-terminal token and
+	production.
+	* ch-exp.y (general_procedure_name):  Now a terminal token.
+	* ch-exp.y (location):  Expand production.
+	* ch-exp.y (match_simple_name_string):  New function.
+	* ch-exp.y (yylex):  Call match_simple_name_string and return
+	GENERAL_PROCEDURE_NAME or LOCATION_NAME as appropriate.
+
+Wed Nov 25 07:17:13 1992  Fred Fish  (fnf@cygnus.com)
+
+	* munch:  Backslash escape vertical bar characters inside
+	grep patterns since they have special meaning for some greps.
+	* parse.c (write_exp_string):  Complete rewrite to store string
+	contants as a leading explicit length, followed by the string data,
+	followed by a trailing explicit length.
+	* eval.c (evaluate_subexp), expprint.c (print_subexp),
+	parse.c (length_of_subexp), parse.c (prefixify_subexp):
+	Use recorded explicit length of strings in expression elements,
+	rather than strlen.  Adjust code to skip over strings stored in
+	expression elements, and code to access strings, to account for
+	new leading explicit size expression element.
+	* parse.c (length_of_subexp):  Test for minimum endpos of 1, not
+	0, to avoid negative expression element indices.
+	* valops.c (search_struct_method):  Minor whitespace change.	
+
+Mon Nov 23 11:14:15 1992  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (yylex):  Add tempbuf, tempbufindex, and tempbufsize,
+	which together maintain a dynamically expandable static buffer
+	for the lexer to use when translating C strings to their internal
+	form (other future uses possible).  Fix parsing of C style strings
+	to do the normal C style input conversions of escaped character
+	sequences.
+	* valops.c (value_string):  Remove translation of escaped
+	character sequences, now done in C expression parser.
+	* language.h (PRINT_LITERAL_FORM):  New macro that takes character
+	and decides if it should be printed in literal form or some other
+	form, based on it's ASCII value and setting of sevenbit_strings.
+	* {c-exp.y, m2-exp.y} (emit_char):  Use new PRINT_LITERAL_FORM
+	macro, change indentation style.
+	* ch-exp.y (chill_printchar):  Use new PRINT_LITERAL_FORM macro.
+	* ch-exp.y (chill_printstr):  First cut at real function instead
+	of error stub.
+
+Sun Nov 22 16:21:41 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* nindy-share/stop.h: fixed bogus comment-end in copyright message
+
+	* i960-pinsn.c: fixed two calls of fputs_filtered that had 3 arguments
+
+Fri Nov 20 21:35:57 1992  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h (sevenbit_strings):  Add declaration.
+	* defs.h (printchar):  Replace with gdb_printchar.
+	* language.h (language_defn):  Add new function pointers
+	la_printchar and la_printstr, to do language dependent
+	printing of characters and strings.
+	* language.h (local_printchar, local_printstr):  New macros
+	to call language dependent functions pointed to by la_printchar
+	and la_printstr respectively.
+	* c-exp.y (emit_char, c_printchar, c_printstr):  New language
+	dependent functions for printing characters and strings.
+	* c-exp.y (c_language_defn, cplus_language_defn):  Add
+	c_printchar and c_printstr.
+	* command.c (do_setshow_command):  Rename printchar use to
+	gdb_printchar.
+	* expprint.c (print_subexp):  Replace C style string output
+	with call to local_printstr.
+	* language.c (unk_lang_printchar, unk_lang_printstr):
+	New stubs, currently errors.
+	* language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn):  Add unk_lang_printchar and
+	unk_lang_printstr.
+	* m2-exp.y (emit_char, m2_printchar, m2_printstr):  New
+	language dependent functions to print characters and strings.
+	* m2-exp.y (m2_language_defn):  Add m2_printchar and m2_printstr.
+	* utils.c (printchar):  Renamed to gdb_printchar.
+	* valprint.c (print_string):  Remove prototype, function moved
+	to c-exp.y, where it becomes c_printstr.
+	* valprint.c (print_max):  Made global for reference from the
+	language dependent printing routines in *-exp.y.
+	* valprint.c (repeat_count_threshold):  New variable with function
+	of old REPEAT_COUNT_THREHOLD define, but now settable by user.
+	Change all references to old macro to references to new variable.
+	* valprint.c (value_print, val_print):  Replace calls to
+	print_string with calls to local_printstr.
+	* valprint.c (val_print):  Replace C style character printing
+	with call to local_printchar.
+	* valprint.c (val_print):  Add case for TYPE_CODE_CHAR.
+	* valprint.c (_initialize_valprint):  Add add_show_from_set
+	call for setting up repeat_count_threshold as print variable.
+	* ch-exp.y (decode_integer_value):  New function.
+	* ch-exp.y (decode_integer_literal):  Use decode_integer_value.
+	* ch-exp.y (chill_printchar, chill_printstr):  New language
+	dependent functions for printing characters and strings.
+	* ch-exp.y (chill_language_defn):  Add chill_printchar and
+	chill_printstr.
+
+Thu Nov 19 21:22:21 1992  John Gilmore  (gnu@cygnus.com)
+
+	* main.c (main):  Print GDB version number in gdb -help; doc pid arg.
+	Suggested by Marty Leisner, <leisner@eso.mc.xerox.com>.
+	(print_gdb_version):  New arg is stdout or stderr.  Callers changed.
+
+Wed Nov 18 15:05:45 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-vx.c (vx_kill): just warn if we can't contact the board,
+	and assume the process has been killed.
+
+Wed Nov 18 14:39:57 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* remote-udi.c (udi_open):  Reset vars so that user can re-run
+	programs without leaving GDB.
+	* (many routines):  Slightly improve error handling.
+	* (download):  Zero out BSS by longs instead of bytes to avoid
+	timeouts in real hardware.
+	* 29k-share/udi/udip2soc.c (UDIDisconnect, UDIKill):  Indicate
+	that connection is no longer in use after shutdown() of socket.
+	This keeps GDB from dying of a SIGPIPE when you issue multiple
+	`target udi' commands.
+
+Wed Nov 18 14:27:47 1992  Fred Fish  (fnf@cygnus.com)
+
+	* language.h (language_format_info):  New structure to bundle
+	local formatting information.
+	* language.h (language_defn):  Replace individual format info
+	with language_format_info structs.
+	* language.h (local_*_format, local_*_format_prefix,
+	local_*_format_specifier, local_*_format_suffix):  New macros
+	for binary/octal/decimal/hex formats to access info elements.
+	* c-exp.y (c_language_defn):  Update for new format handling.
+	* m2-exp.y (m2_language_defn):  Update for new format handling.
+	* dbxread.c (language.h):  Include for partial-stab.h use.
+	* mipsread.c (expression.h, language.h):  Include for
+	partial-stab.h use.
+	* defs.h (local_hex_format, local_hex_format_custom,
+	local_hex_string, local_hex_string_custom):  Move to language.h.
+	* language.c (local_hex_format_custom, local_hex_string,
+	local_hex_string_custom, local_octal_format_custom):  Use new
+	format handling.
+	* language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn):  Update for new format handling.
+	* printcmd.c (print_scalar_formatted):  Use new macros
+	to access decimal and binary format info for printing.
+	* c-exp.y (chill_language_defn):  Update for new format handling.
+	* ch-exp.y (CHARACTER_LITERAL):  Add support to yylex.
+	* ch-exp.y (decode_integer_literal):  Add function
+	* ch-exp.y (match_integer_literal):  Use decode_integer_literal.
+	* ch-exp.y (builtin_type_chill_char):  Add definition.
+	* gdbtypes.h (builtin_type_chill_char):  Add declaration.
+
+Tue Nov 17 11:17:06 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+ 	* tm-rs6000.h (BELIEVE_PCC_PROMOTION): Define, since AIX cc gets
+	it right.
+	(aix_framedata): added nosavedpc field.
+	(SAVED_PC_AFTER_CALL): Don't try to optimize; just call
+	read_register.
+	(FRAMELESS_FUNCTION_INVOCATION): Pass second argument of 0.
+	(FRAME_SAVED_PC): If PC not saved, use SAVED_PC_AFTER_CALL.
+	* rs6000-tdep.c (skip_prologue): Handle gcc generated stfd
+	instructions as function_frame_info does.  Expand special case of
+	st r31,-4(r1) to be st r31,NUM(r1), since gcc can generate offsets
+	other than -4.
+	(pop_frame): Add 4 rather than sizeof (int) to avoid host
+	dependence.
+	(function_frame_info): Set frameless if the function has no frame,
+	and set nosavedpc if the PC was not saved.  Handle gcc generated
+	stfd 31,-4(31); st 31, -12(31) correctly.
+	(frameless_function_invocation): New second argument pcsaved; if 0
+	return whether the function has a frame, if 1 return whether the
+	function saved PC.
+	(frame_initial_stack_address): Correct typo: cache registers for
+	callee_fi, not for fi, (avoids reading garbage memory locations).
+
+Mon Nov 16 15:58:07 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior (just before step_over_function
+	label)):  Change test for stepping into subroutine to check for the
+	presence of line number info.  This makes stuff compiled with -g1
+	cause GDB to not lose control when stepping.
+
+	* symtab.c (find_pc_line):  Improve code per gnu's suggestions.
+	Improve comments as well.
+
+Sun Nov 15 09:22:09 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.7.2
+	* symtab.c (find_pc_symtab):  Fix return of random value
+	to caller.
+	* Makefile.in (c-exp.tab.c, m2-exp.tab.c):  Add dependency on
+	Makefile since it contains sed patterns used in generation.
+	Add sed pattern to also delete #include of any malloc.h.
+	* c-exp.y, expr.c, expression.h, language.c, m2-exp.y,
+	parser-defs.h, valarith.c, valops.c, value.h:  Remap macros and
+	function names to conform to K&R terminology with respect to
+	logical and bitwise operators:
+	UNOP_ZEROP => UNOP_LOGICAL_NOT
+	UNOP_LOGNOT => UNOP_COMPLEMENT
+	BINOP_LOGAND => BINOP_BITWISE_AND
+	BINOP_LOGXOR => BINOP_BITWISE_XOR
+	BINOP_LOGIOR => BINOP_BITWISE_IOR
+	BINOP_AND => BINOP_LOGICAL_AND
+	BINOP_OR => BINOP_LOGICAL_OR
+	PREC_OR => PREC_LOGICAL_OR
+	PREC_AND => PREC_LOGICAL_AND
+	PREC_LOGIOR => PREC_BITWISE_IOR
+	PREC_LOGXOR => PREC_BITWISE_XOR
+	PREC_LOGAND => PREC_BITWISE_AND
+	value_zerop() => value_logical_not()
+	value_lognot() => value_complement()
+	* c-exp.y (c_op_print_tab):  Add explicit empty terminator.
+	* m2-exp.y (m2_op_print_tab):  Add explicit empty terminator.
+	* i387-tdep.c (sys/dir.h):  Remove, appears to be unnecessary
+	and is nonexistant in some SVR4 based systems.
+	* language.c (DEFAULT_ALLOCSIZE):  Change from 3 => 4.
+	* m2-exp.y (number_sign, modblock):  Make static, #ifdef out
+	unused modblock.
+	* m2-exp.y (ANDAND):  Rename to LOGICAL_AND.
+	* source.c (source_info):  Fix minor nits, print "1 line" rather
+	than "1 lines", and "language is <lang>".
+	* valarith.c (value_binop):  Handle TYPE_CODE_BOOL as well
+	as TYPE_CODE_INT and TYPE_CODE_FLOAT.
+	* valprint.c (val_print):  Print TYPE_CODE_BOOL type values as
+	"TRUE" or "FALSE".
+	* values.c (value_from_longest):  Handle TYPE_CODE_BOOL.
+	* ch-exp.y:  New expression parser, for GNU-Chill.
+	* defs.h (enum language):  Add language_chill.
+	* dwarfread.c (set_cu_language):  Add LANG_CHILL case and make
+	LANG_MODULA2 a recognized language.
+	* gdbtypes.h (enum_typecode):  Note TYPE_CODE_BOOL used for 
+	Chill as well as Modula-2.
+	* gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long,
+	builtin_type_chill_ulong, builtin_type_chill_real):  Add.
+	* language.c (set_language_command):  Add chill.
+	* language.c (binop_result_type, integral_type, character_type,
+	boolean_type, structured_type, value_true, binop_type_check):
+	Add language_chill cases.
+	* language.h (_LANG_chill):  Define.
+	* symfile.c (deduce_language_from_filename):  Recognize the
+	filename extensions ".chill", ".c186", and ".c286" for Chill.
+	* valprint.c (typedef_print):  Add case for language_chill.
+	* Makefile.in (SFILES_MAINDIR):  Add ch-exp.y.
+	* Makefile.in (YYFILES):  Add ch-exp.tab.c.
+	* Makefile.in (YYOBJ):  Add ch-exp.tab.o.
+	* Makefile.in (saber_gdb):  Add unload of ch-exp.y and load
+	of ch-exp.tab.c.
+	* Makefile.in (distclean):  Add target ch-exp.tab.c.
+	* Makefile.in (realclean):  Add rm of ch-exp.tab.c.
+	* Makefile.in (ch-exp.tab.o, ch-exp.tab.c):  New targets.
+	* eval.c (evaluate_subexp):  Add OP_BOOL case.
+	* expprint.c (print_subexp):  Add OP_BOOL case.	
+
+Fri Nov 13 20:36:28 1992  John Gilmore  (gnu@cygnus.com)
+
+	* infcmd.c (set_environment_command):  Avoid skipping first
+	char of env value if an '=' appears in it.  Bug report and fix
+	by Mark Jungerman, <maj@lucid.com>.
+
+Fri Nov 13 20:24:10 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* infcmd.c (step_over_calls):  Improve comments.
+	* symtab.c (find_pc_psymtab):  Clean up a bit.
+	* (find_pc_symtab):  Fix comments, clean up code.
+	* (find_pc_line):  General cleanups, efficiency improvements.
+	Also, don't return garbage when some line info exists, but there
+	was no good match.
+
+Thu Nov  5 23:04:38 1992 Rob Ryan (rr2b@andrew.cmu.edu)
+
+        * xcoffexec.c (vmap_symtab): fixed a bug where if a object has no
+        member, and the stat pointer passed to vmap_symtab was NULL, the
+        wrong vmap entries would be modified.  Fixes behavior where
+        attempting to load symbols for a module with no member would mess
+        up already read in symbols.
+
+Wed Nov 11 17:09:17 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Remove dependancies for 29k-share/dfe/yank.o and
+	29k-share/dfe/mini2udi.o.
+	* config/a29k-udi.mt:  Remove yank.o and mini2udi.o.
+	* alldeps.mak, depend:  Update to deal with removal of
+	aforementioned files.
+	* remote-udi.c:  Major cleanups.  Clean up udi_open and drop
+	requirement for useless 'program' argument.  Clean up
+	udi_create_inferior, and udi_load to call common download()
+	routine.  Create download routine to load remote hosts directly
+	(with the help of BFD) so that we don't need yank.c and
+	mini2udi.c.
+	Fix udi_detach to call UDIDisconnect with
+	the right arguments.  Clean up udi_resume, don't assign tip_error
+	twice.  Clean up udi_wait, straighten out status codes.  Make
+	udi_kill really work.
+
+Fri Nov  6 10:26:01 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+    	* c-exp.y: separated host/target idea of integer type size,
+	removed redundant parse rules. (YYSTYPE): added typed_val, removed
+	UINT and CHAR rules. (parse_number): work out the targetwise type
+	of a number based upon it's size and qualifiers. (yylex): chars
+	are now treated the same way as ints.
+
+	* source.c (indentify_source_line): don't core dump if wanted
+	line is larger than number of lines in source. (can happen when
+	coff gets confused about #included source).
+
+Fri Nov  6 03:00:39 1992  John Gilmore  (gnu@cygnus.com)
+
+	Fix problems noticed by Allan Steel, <allan@maths.su.oz.au>,
+	when debugging a program with 100 shared libraries.
+
+	* solib.c (solib_map_sections):  Always close the BFD we open.
+	Free all malloc'd storage we allocate, too, including error cases.
+	(struct so_list):  Remove unused so_bfd member.
+	(clear_solib):  Don't bother closing so_bfd.
+
+	* symfile.c (symfile_bfd_open):  Mark newly opened BFD as
+	cacheable.  `So many symbol files, so little file descriptors.'
+	
+Fri Nov  6 00:14:38 1992  John Gilmore  (gnu@cygnus.com)
+
+	* m68k-stub.c:  Remove ansidecl.h and the few uses of it.
+	Stubs should stand alone as much as possible.
+
+	* source.c (show_directories):  Avoid printf_filtered length prob
+	pointed out by Jonathan Stone.
+
+	* i960-pinsn.c (MEM_MAX, MEM_SIZ):  Set upper limit properly to
+	avoid accesses beyond end of table.  Fix by Lee W. Cooprider,
+	<Lee_Cooprider@vos.stratus.com>.
+
+Thu Nov  5 17:33:08 1992  Fred Fish  (fnf@cygnus.com)
+
+	* {ser-bsd.c, ser-termios.c} (serial_close):  Pass address of
+	struct, not struct itself.
+	* serial.h (serial_restore):  Fix prototype, takes pointer not
+	struct.
+
+Thu Nov  5 17:12:42 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (depend):  Add nm.h to the list of things to fixup.
+	* depend:  Redo, to fixup nm.h problems with *-tab.c files.
+
+Thu Nov  5 00:19:51 1992  John Gilmore  (gnu@cygnus.com)
+
+	* i386-stub.c:  Remove ansidecl.h and the few uses of it.
+	Stubs should stand alone as much as possible.
+
+	* README:  Add remote-es1800.c and remote-st2000.c to table.
+	* go32-nat.c:  Remove, there is no native go32 support.
+	* go32-xdep.c:  Remove unused fork, fvork, wait, execlp, kill_inferior.
+
+Wed Nov  4 15:27:31 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* inflow.c (pass_signal, set_sigint_trap, clear_sigint_trap):  Add
+	new routines to deal with sending SIGINTs to attached processes
+	when the user interrupts the controlling GDB.
+	* inftarg.c (child_wait), procfs.c (procfs_wait):  Add calls to
+	the aforementioned routines when waiting for the attached process.
+
+	* elfread.c, mipsread.c:  Include <string.h>.
+	* i386-stub.c:  Include "ansidecl.h" to deal with prototypes.
+	* serial.h:  Add prototype for serial_restore().	
+
+Wed Nov  4 11:13:25 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* minsyms.c (lookup_minimal_symbol_by_pc): subtract 1, not 2, from
+	minimal_symbol_count, because the NULL symbol is not included in
+	the count.  This prevented this function from finding the last
+	symbol in the table.
+
+Tue Nov  3 11:29:17 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* dbxread.c (process_one_symbol): if not defined
+	(BLOCK_ADDRESS_FUNCTION_RELATIVE), set function_start_offset at
+	the start of the function, not just after N_FUN.
+
+Fri Oct 30 16:33:02 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (c-exp.tab.c, m2-exp.tab.c):  Add sed patterns to
+	  remap all malloc's to xmalloc's and all realloc's to xrealloc's.
+	* c-exp.y, m2-exp.y:  Add comment about how malloc/realloc are
+	  remapped to xmalloc/xrealloc, use only malloc/realloc in grammer
+	  file.  Remove preprocessor defines that previously did remapping.
+
+Fri Oct 30 00:58:18 1992  John Gilmore  (gnu@cygnus.com)
+
+	* infcmd.c (run_command):  Avoid long calls to printf_filtered.
+	Bug fix courtesy of Alexander Klaiber.
+
+Tue Oct 27 17:08:45 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	hp300 native support (hp300hpux untested).
+
+	* hp300ux-xdep.c: removed.
+	* xm-hp300bsd.h (REGISTER_U_ADDR): removed.
+	* xm-hp300hpux.h: updated copyright.
+	  (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): removed.
+	* nm-hp300bsd.h, nm-hp300hpux.h, hp300ux-nat.c: new files.
+	* Makefile.in (HFILES): added nm-hp300bsd.h and nm-hp300hpux.h.
+	* config/hp300bsd.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o corelow.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/hp300bsd.mt (TDEPFILES): removed exec.o.
+	* config/hp300hpux.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/hp300hpux.mt (TDEPFILES): removed exec.o.
+
+	Vax ultrix native support.
+
+	* nm-vax.h: new file.
+	* Makefile.in (HFILES): added nm-vax.h.
+	* config/vaxult.mh (XDEPFILES): infptrace.o inftarg.o fork-child.o
+	  coredep.o corelow.o removed.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* xm-vax.h: updated copyright.
+	  (REGISTER_U_ADDR): removed.
+
+	Apollo native support (untested).
+
+	* Makefile.in (HFILES): added nm-apollo68[bv].h.
+	* a68v-nat.c, nm-apollo68[bv].h: new files.
+	* xm-apollo68[bv].h (FETCH_INFERIOR_REGISTERS): removed.
+	* xm-apollo68b.h (PTRACE_IN_WRONG_PLACE): removed.
+	* a68v-xdep.c: removed.
+	* config/apollo68[bv].mh (XDEPFILES): removed infptrace.o
+	  inftarg.o fork-child.o a68v-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+
+	* defs.h: include nm.h.
+	* coredep.c, infptrace.c, procfs.c, rs6000-nat.c, sparc-nat.c,
+	  sparc-tdep.c, : do not include nm.h.
+	* doc/gdbint.texinfo: nm.h now included in defs.h.
+
+Fri Oct 23 04:47:17 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (VERSION):  4.7.1 post release!
+
+	* config/hppahpux.mh (NATDEPFILES):  Add hppah-nat.o.
+
+Fri Oct 23 00:48:08 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  gdb-4.7 release.
+	* README:  Update for gdb-4.7.
+
+Thu Oct 22 11:24:18 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-tdep.c:  include nm.h (for now) so that we get USE_PROC_FS
+	when necessary.
+
+	* alldeps.mak, depend:  Update.
+
+Thu Oct 22 03:14:36 1992  John Gilmore  (gnu@cygnus.com)
+
+	* partial-stab.h ('f', 'F'):  Don't reference pst->textlow if pst
+	is null.
+	* tm-sun4sol2.h (PROLOGUE_FIRSTLINE_OVERLAP):  Remove -- it 
+	causes problems in setting breakpoint in the right place in
+	functions with `float' args which are passed as doubles.
+	* xm-vaxbsd.h (MEM_FNS_DECLARED):  Avoid erroneous redecl's.
+	* config/rs6000.mh (NATDEPFILES):  Add corelow.o.
+
+Thu Oct 22 01:01:24 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (HFILES):  Add nm-i386sco.h.
+	* dwarfread.c:  include <sys/types.h> for SCO.
+	* infptrace.c:  Don't include ptrace.h under SCO.
+	* config/i386sco.mh:  Use -D_POSIX_SOURCE instead of -posix for
+	gcc.
+	* config/i386v.mt:  Add exec.o to TDEPFILES.
+
+Wed Oct 21 19:08:20 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* i386v-nat.c:  Remove space from front of #endif.
+	* irix4-nat.c:  Remove externs of registers[], include inferior.h
+	instead.
+	* mips-nat.c:  Explicitly initialize zerobuf to 0!
+	* mips-tdep.c (init_extra_frame_info):  Undo John's last change.
+	Always setup fci->frame, even if it's non-zero.  Too many places
+	depend upon this behavior (and I have to get a release out the
+	door)!
+	* mipsread.c (parse_partial_symbols, psymtab_to_symtab_1):  Set
+	processing_gcc_compilation if we find the embedded stabs marker.
+	This fixes several bugs with finding the location of short or char
+	function parameters passed on the stack.
+
+Wed Oct 21 17:46:07 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Native support for sun4sol2.
+
+	* xm-sysv4.h (USE_PROC_FS, ATTACH_DETACH): removed to nm-sysv4.h.
+	* nm-sysv4.h: new file.
+	* Makefile.in (HFILES): added nm-sysv4.h.
+	* config/sun4sol2.mh (XDEPFILES): removed procfs.o fork-child.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/sun4sol2.mt (TDEPFILES): removed exec.o and solib.o.
+
+Wed Oct 21 03:51:01 1992  John Gilmore  (gnu@cygnus.com)
+
+	* coredep.c:  Include "nm.h" to get REGISTER_U_ADDR.
+	* doc/gdbint.texinfo:  Improve REGISTER_U_ADDR and USE_PROC_FS doc.
+
+	* Makefile.in (VERSION):  Tick to 4.6.9.
+
+Tue Oct 20 23:27:56 1992  John Gilmore  (gnu@cygnus.com)
+
+	* mipsread.c (UNSAFE_DATA_ADDR):  Remove MIPS-host-specific
+	definition, replace with portable one.
+	* remote-nindy.c:  Lint.
+	(nindy_wait):  Return type is int, result is inferior_pid.
+	* symmisc.c (dump_psymtab):  Only print section_offsets if set.
+	(initialize_symmisc):  Remove empty function.
+	* tm-spc-noun.h, tm-sun4os4.h, tm-sun4sol2.h (STACK_END_ADDRESS):
+	Remove obsolete, misspelled macro.
+	* doc/gdbint.texinfo:  Document obsolete STACK_END_ADDR.
+	(all @node commands):  Use new form to avoid nitpicking errors.
+	* doc/gdbint.texinfo:  Document host/native/target split.
+	                                                                   
+Wed Oct 21 00:14:34 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mips-nat.c (zerobuf):  Get rid of const to avoid gcc warnings.
+
+	* xm-mips.h (offsetof):  Don't define this if __STDC__.
+
+Tue Oct 20 21:32:18 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	umax native support (untested).
+
+	* config/umax.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/umax.mt (TDEPFILES): removed exec.o.
+	* xm-umax.h (U_REGS_OFFSET, ATTACH_DETACH, REGISTER_U_ADDR):
+	  removed to nm-umax.h.
+	* nm-umax.h: new file.
+	* Makefile.in (HFILES): added nm-umax.h.
+
+	hppa native support (untested).
+
+	* config/hppahpux.mh, config/hppabsd.mh (XDEPFILES): now empty.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/hppabsd.mt (TDEPFILES): removed exec.o and hppab-core.o.
+	* config/hppahpux.mt (TDEPFILES): removed exec.o.
+	* xm-hppa[bh].h (REGISTER_U_ADDR, U_REGS_OFFSET): removed.
+	* nm-hppa[bh].h, hppa[bh]-nat.c: new files.
+	* hppa[bh]-xdep.c: removed.
+	* hppa[bh]h-tdep.c: do not include ptrace.h.
+	* Makefile.in (HFILES): added nm-hppa[bh].h.
+
+	* doc/gdbint.texinfo: add PUSH_DUMMY_FRAME, POP_FRAME.
+
+Tue Oct 20 00:01:46 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mips-nat.c:  Straighten out include files.  Work around
+	conflicting defs of JB_xxx syms in <setjmp.h> and <machine/pcb.h>
+	for Ultrix-4.2.
+
+Mon Oct 19 15:09:57 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mips-nat.c (fetch_core_registers, register_addr):  Copy from
+	coredep.c, but zero out FP_REGNUM & ZERO_REGNUM so that stack
+	backtraces from core files work.
+	* config/decstation.mh, config/irix3.mh:  Remove coredep.o.
+	Functions are now defined in mips-nat.c.
+
+	* tm-irix3.h:  Put MIPS_EFI_SYMBOL_NAME in here too.
+
+	* remote-hms.c:  Disable all uses of serial_nextbaudrate and
+	serial_default_name().
+
+	* remote-hms.c, ser-go32.c, serial.h:  Change from
+	serial_timedreadchar() to new serial_readchar().
+
+	* Makefile.in (HFILES):  Fixup list of nm-*.h files.  Add missing ones.
+
+Mon Oct 19 12:45:23 1992  Per Bothner  (bothner@cygnus.com)
+
+	* c-exp.y:  Moved handling of 'const' and 'volatile' from
+	<type> to <typebase>.  This removes 2 conflicts.
+
+Sun Oct 18 00:36:30 1992  Fred Fish  (fnf@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set_one):  Don't delete watchpoints
+	from breakpoint table when reseting breakpoints.
+
+Sat Oct 17 00:59:23 1992  Fred Fish  (fnf@cygnus.com)
+
+	Native support cleanup and corefile fixes for i386 SVR4 systems.
+
+	* i386-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
+	  fill_fpregset): Moved to i386v4-nat.c
+	* i386v4-nat.c, nm-i386v4.h, :  New files.
+	* i386sol2.mh, i386v4.mh, ncr3000.mh (NAT_FILE):  Use nm-i386v4.h.
+	* i386sol2.mh, i386v4.mh, ncr3000.mh (NATDEPFILES):  Add corelow.o,
+	  change i386v-nat.o to i386v4-nat.o.
+
+Fri Oct 16 13:06:08 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Miscellaneous 386 configs updated.
+
+	* config/i386aout.mt (TDEPFILES): removed exec.o.
+	* config/i386sol2.mh, config/ncr3000.mh, config/i386v4.mh
+	  (XDEPFILES): removed procfs.o fork-child.o i386-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/i386aout.mt, config/i386sol2.mt, config/ncr3000.mt,
+	  config/i386v4.mt (TDEPFILES): removed exec.o.
+	* config/i386v32.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o corelow.o i386-xdep.o i387-tdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/i386sco.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o corelow.o i386-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+
+	Native support cleanup for i386bsd (untested).
+
+	* config/i386bsd.mt (NATDEPFILES): exec.o removed.
+	* config/i386bsd.mh (NATDEPFILES): added exec.o
+	* tm-i386bsd.h (FLOAT_INFO): removed.
+	* nm-i386bsd.h (FLOAT_INFO): added.
+
+	Native support for i386v (untested).
+
+	* config/i386v.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o corelow.o i386-xdep.o i387-tdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/i386v.mt (TDEPFILES): removed exec.o, added i387-tdep.o.
+	* i386-xdep.c: removed.
+	* Makefile.in (HFILES): added nm-i386v.h
+	* i386v-nat.c, nm-i386v.h: new file.
+	* xm-i386v.h: (REGISTER_U_ADDR, i386_register_u_addr): removed to
+	  nm-i386v.h.
+	* tm-i386v.h (FLOAT_INFO): removed.
+
+	Native support for linux (untested).
+
+	* config/linux.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o corelow.o i387-tdep.o i386-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/linux.mt (TDEPFILES): removed exec.o, added i387-tdep.o.
+	* Makefile.in (HFILES): added nm-linux.h.
+	* nm-linux.h: new file.
+	* xm-linux.h: updated copyright.  cleaned up formatting.
+	  (ATTACH_DETACH, U_REGS_OFFSET): removed to nm-linux.h.
+
+	Native support for sun386 (untested).
+
+	* config/sun386.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o sun386-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/sun386.mt (TDEPFILES): removed exec.o.
+	* Makefile.in (HFILES): added nm-sun386.h.
+	* sun386-nat.c, nm-sun386.h: new file.
+	* sun386-xdep.c: removed.
+	* xm-sun386.h: updated comment and copyright.
+	  (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): removed to
+	  nm-sun386.h.
+
+	Native support for i386mach (untested).
+
+	* config/i386mach.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o mach386-xdep.o.
+	  (NAT_FILE, NATDEPFILES): new macros.	  
+	* Makefile.in (HFILES): added nm-i386mach.h.
+	* nm-i386mach.h, i386mach-nat.c: new files.
+	* mach386-xdep.c: removed.
+	* xm-i386mach.h: updated copyright.
+	  (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): removed to
+	  nm-i386mach.h.
+
+	Native separation for go32 (untested).
+
+	* config/go32.mh (NAT_FILE, NATDEPFILES): new macros.
+	* go32-nat.c: new file.
+	* go32-xdep.c (call_ptrace, child_resume,
+	  fetch_inferior_registers, store_inferior_registers,
+	  child_xfer_memory, fetch_core_registers): removed to go32-nat.c.
+
+	Native support for m88k (untested).
+
+	* Makefile.in (HFILES): added nm-m88k.h
+	* xm-delta88.h, xm-m88k.h (REGISTER_U_ADDR,
+	  FETCH_INFERIOR_REGISTERS): removed.
+	* config/m88k.mh, config/delta88.mh (XDEPFILES): infptrace.o
+	  inftarg.o fork-child.o m88k-xdep.o removed to NATDEPFILES.
+	  (NAT_FILE, NATDEPFILES): new macros.
+	* config/m88k.mt, config/delta88.mt (TDEPFILES): removed exec.o.
+	* m88k-nat.c, nm-m88k.h, nm-delta88.h: new files.o.
+	* m88k-xdep.c: removed.
+
+Fri Oct 16 04:16:30 1992  John Gilmore  (gnu@cygnus.com)
+
+	* i386b-nat.c:  Comment changes.
+	* nm-i386bsd.h, xm-i386bsd.h:  Split native dependent pieces out
+	into new nm-file.
+	* config/i386bsd.mh (NAT_FILE):  Point to new nm-file.
+
+Fri Oct 16 03:34:01 1992  John Gilmore  (gnu@cygnus.com)
+
+	Avoid longjmp()-catching compilation errors in cross-ports.
+
+	* doc/gdbint.texinfo:  Update GET_LONGJMP_TARGET, L_SET doc.
+	* irix4-nat.c, mips-nat.c (JB_ELEMENT_SIZE, get_longjmp_target):
+	Move from mips-tdep.c and tm-{irix3,mips}.h.
+	* mips-nat.c:  Remove a bunch of code that was ifdef'd out of
+	native MIPS ports.
+	* nm-irix3.h, nm-mips.h (GET_LONGJMP_TARGET):  Move from tm-irix3.h
+	and tm-mips.h.
+
+	* ultra3-nat.c (register_addr):  Move from ultra3-xdep.c.
+	(fetch_core_registers):  Fix bfd_seek arguments.	
+
+Fri Oct 16 03:02:28 1992  John Gilmore  (gnu@cygnus.com)
+
+	Make core files work again (add back the `core' target).
+
+	* config/decstation.mh, news.mh, sun2os3.mh, sun2os4.mh
+	(NATDEPFILES):  Add corelow.o.
+	* config/delta88.mt, m88k.mt (TDEPFILES):  Remove coredep.o, it's
+	native dependent.
+
+	* config/3b1.mh, bigmips.mh, hp300bsd.mh, hppabsd.mh, hppahpux.mh,
+	i386sco.mh, i386v.mh, i386v32.mh, irix3.mh, isi.mh, linux.mh,
+	littlemips.mh, merlin.mh, news1000.mh, pn.mh, rtbsd.mh, tahoe.mh,
+	vaxbsd.mh, vaxult.mh (XDEPFILES): Add corelow.o whenever coredep.o
+	appears.  FIXME, these should be moved to NATDEPFILES for native
+	use only.
+
+Thu Oct 15 21:53:53 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Ultra3 host/target/native split.  (untested).
+
+	* ultra3-xdep.c: updated copyright.  Do not include sys/ptrace.h.
+	  (fetch_register, fetch_inferior_registers,
+	  store_inferior_registers, fetch_core_registers): removed to
+	  ultra3-nat.c.
+	* xm-ultra3.h (FETCH_INFERIOR_REGISTERS, U_REGS_OFFSET): removed
+	  to nm-ultra3.h.
+	* Makefile.in (HFILES): added nm-ultra3.h.
+	* nm-ultra3.h, ultra3-nat.c: new files for native support.
+	* config/ultra3.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o.
+	  (NAT_FILE, NATDEPFILES): new macros for native support.
+	* config/ultra3.mt (TDEPFILES): exec.o removed.
+
+	* xm-vaxult.h: add MEM_FNS_DECLARED.
+
+Thu Oct 15 02:59:30 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to 4.6.8.
+	(OBS):  Put version.o first, so Makefile rebuild happens early.
+	
+	* command.h:  Publicize prototype for not_just_help_class_command.
+	* command.c:  Remove proto.
+	* maint.c:  Mark "mt" as an abbrev, to avoid duplicated help
+	output.  Move "maint info" from class info to class maintenance,
+	and improve text.
+	* infrun.c:  Move "stop" to class_obscure, and give it a
+	function so it will not be seen as a global help topic.  FIXME,
+	it should be possible to set these attributes independently.
+
+	* core.c (core_command):  Make nicer error message for no core support.
+
+	Lint around file_ptr's (bfd's off_t's) and bfd_seek.
+
+	* dbxread.c (read_dbx_symtab):  Use L_SET as bfd_seek arg.
+	(elfstab_build_psymtabs):  staboffset and stabstroffset args are
+	file_ptr's.
+	* dwarfread.c (struct dwfinfo):  Convert dbfoff, lnfoff to file_ptr.
+	(scan_compilation_units):  Punt unused filename arg.  dbfoff,
+	lnoffset, and curlnoffset are file_ptr's now.
+	(dwarf_build_psymtabs):  Drop desc and filename args; use
+	objfile.  dbfoff and lnoffset are file_ptr's now.
+	(read_ofile_symtab):  foffset is now file_ptr.  Use L_SET in bfd_seek.
+	* elfread.c (struct elfinfo):  dboffset and lnoffset are file_ptr's.
+	(elf_symfile_read):  Skip desc and filename args to
+	dwarf_build_psymtabs.  Pass file_ptr's to elfstab_build_psymtabs.
+	* gdb-stabs.h:  Use file_ptr rather than off_t.
+	* mipsread.c (fixup_symtab): f_ptr is a file_ptr.  Re-enable
+	compile-time debug check that someone turned off as "unused".
+	(read_the_mips_symtab):  st_filptr is a file_ptr.  Fix bfd_seek call.
+	* symfile.h:  Update dwarf_build_psymtabs and
+	elfstab_build_psymtabs prototypes.
+	* xcoffread.c (init_stringtab, init_lineno, xcoff_symfile_read):
+	Use file_ptr offsets.  bfd_seeks use L_SET.
+
+Thu Oct 15 01:27:32 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mips-tdep.c, mipsread.c, tm-mips.h:  Get rid of ".gdbinfo."
+	symbol.  #define MIPS_EFI_SYMBOL_NAME instead.  Use different
+	value so that demangler won't be invoked.  This greatly speeds up
+	stepping.
+	* mips-tdep.c (mips_pop_frame):  Rewrite handling of
+	linked_proc_info so that it properly deallocates the appropriate
+	item after it is done with it instead of before.
+	* Don't pass bogus frame pointer to create_new_frame().  Just
+	leave it as zero so that lower level code will figure out the
+	correct value.
+
+Wed Oct 14 18:56:28 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Sony News native support.
+
+	* Makefile.in (HFILES): added nm-news.h.
+	* nm-news.h: new file.
+	* config/news.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o to NATDEPFILES.
+	  (NAT_FILE, NATDEPFILES): new macros for native support.
+	* config/news.mt (TDEPFILES): removed exec.o.
+
+	* remote-vx.c: remove redundant include of sys/time.h.
+
+	* infrun.c: include ctype.h.  Otherwise some machines result in
+	  undefined for isdigit.
+
+Tue Oct 13 01:27:14 1992  John Gilmore  (gnu@cygnus.com)
+
+	* configure.in:  Convert m68k entries to m68* entries to handle
+	all the various m68xxx hosts and targets.
+	* config/news1000.mt:  No longer needed, same as news.mt.
+
+Fri Oct  9 18:54:37 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* config/sun3os[34].mh (NATDEPFILES): remove duplicate inftarg.o.
+
+Fri Oct  9 14:20:08 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (HFILES):  Add all nm-irix3.h, nm-irix4.h,
+	nm-sun2.h, nm-mips.h.
+
+	* config/irix3.mh (NATDEPFILES):  nat-mips.o => mips-nat.o.
+
+	* Makefile.in (alldeps.mak):  Add = sign after NATDEPFILES.
+
+	* config/bigmips.mh config/littlemips.mh:  Remove mips-xdep.o.
+
+Fri Oct  9 08:41:11 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* xm-hppah.h: if __STDC__ is not defined, define
+	HPPA_COMPILER_BUG.
+	symtab.c (decode_line_1): avoid a bug in the HP9000/700 native
+	compiler; see the comment in the file.
+
+Fri Oct  9 04:43:43 1992  John Gilmore (gnu@cygnus.com)
+
+	First cut at support for all BSD variants on 386.
+
+	* tm-i386bsd.h, xm-i386bsd.h:  New config files.
+	* i386b-nat.c:  New native support file.
+	* configure.in:  Add host and target for i[34]86-*-bsd*.
+	* config/i386bsd.mh, config/i386bsd.mt:  New config files.
+
+Fri Oct  9 00:31:33 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Sun2 native support (untested).
+
+	* xm-sun2.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS,
+	  REGISTER_U_ADDR): removed to nm-sun2.h.
+	* nm-sun2.h: new file.
+	* config/sun2os[34].mh (XDEPFILES): infptrace.o inftarg.o
+	  fork-child.o sun3-xdep.o removed.
+	  (NAT_FILE, NATDEPFILES): new macros.
+
+	Mips native support.  Decstation and iris4 have been tested.
+	Iris3 has not.
+
+	* mips-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
+	  fill_fpregset): removed to irix4-nat.c
+	* mips-xdep.c: removed.
+	* irix4-nat.c, mips-nat.c, nm-irix3.h, nm-irix4.h, nm-mips.h: new
+	  files.
+	* procfs.c: include nm.h.
+	* xm-irix3.h (U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS): removed.
+	* xm-irix4.h: bump copyright.
+	(U_REGS_OFFSET, FETCH_INFERIOR_REGISTERS, USE_PROC_FS,
+	PROC_NAME_FMT): removed.
+	* xm-mips.h (FETCH_INFERIOR_REGISTERS): removed.
+	* config/irix4.mh (XDEPFILES): removed procfs.o fork-child.o.
+	(NAT_FILE, NATDEPFILES): new macros for native support.
+	(CC): supply default compiler switches.
+	* config/irix3.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o coredep.o.
+	(NAT_FILE, NATDEPFILES): new macros for native support.  Note that
+	irix3 is untested.
+	* config/decstation.mh (XDEPFILES): removed infptrace.o inftarg.o
+	  fork-child.o mips-xdep.o coredep.o.
+	  (NAT_FILE, NATDEPFILES): new macros for native support.
+
+Thu Oct  8 23:50:51 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* config/rs6000.mh (XDEPFILES): removed fork-child.o.
+	(NATDEPFILES): added fork-child.o
+	* config/sun3os3.mh (XDEPFILES): removed fork-child.o.
+	(NATDEPFILES): added fork-child.o
+	* config/sun3os4.mh (XDEPFILES): removed fork-child.o.
+	(NATDEPFILES): added fork-child.o
+
+Thu Oct  8 23:19:25 1992  John Gilmore  (gnu@cygnus.com)
+
+	* infcmd.c (path_info):  Avoid 250-char limit on printf_filtered,
+	by using puts_filtered instead.
+
+Fri Oct  9 00:28:25 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* remote-nindy.c (nindy_load): Replacement version from Steve
+	Chamberlain, doesn't require forking to run "strip" or "sx".
+
+Thu Oct  8 18:27:35 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (HFILES):  Add nm-*.h files.
+
+Thu Oct  8 16:27:45 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* config/sun4os4.mh (XDEPFILES): fork-child.o removed.
+	(NATDEPFILES): added fork-child.o.
+
+	* doc/gdbint.texinfo: document a few more macros, create new
+	  section for native macros.
+
+Thu Oct  8 13:52:46 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in alldeps.mak depend:  Rip out 29k/udi pending
+	resolution of copyright issues.
+
+Wed Oct  7 20:08:53 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (setup-to-dist):  Remove -norecursion so that doc
+	subdir gets configured.
+
+Wed Oct  7 12:24:01 1992  Ken Raeburn  (raeburn@cygnus.com)
+
+	* Makefile.in (nindy.o): Define "STRIP" as pathname of strip
+	program.
+	* nindy-share/nindy.c (coffstrip): Use that pathname, instead of
+	searching for a "bfd_strip" program.  Also, fixed up arguments
+	passed to that program.
+
+	* tm-nindy960.h (ADDITIONAL_OPTIONS): Use "-ser" rather than "-r",
+	which is now used for something else.  Rewrite description of
+	associated parameters to match how gdb does it now.
+	(ADDITIONAL_OPTION_HELP): Fix message accordingly.
+
+	* m68k-pinsn.c (print_insn_arg): Handle new "`" operand type.
+
+Tue Oct  6 14:47:11 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	NOTICE_SIGNAL_HANDLING_CHANGE macro added to the target vector as
+	to_notice_signals.
+
+	* inferior.h (proc_signal_handling_change): prototype removed.
+	* infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE): default removed.
+	(handle_command): now calls target_notice_signals.
+	* procfs.c (proc_signal_handling_change): renamed to
+	  procfs_notice_signals.  Now static.  Add prototype.  All callers
+	  changed.
+	* target.h (struct target_ops): new field, to_notice_signals.
+	(target_notice_signals): new macro to cover new field.
+	* target.c (cleanup_target): default to_notice_signals to ignore.
+	* corelow.c (core_ops),
+	exec.c (exec_ops),
+	inftarg.c (child_ops),
+	procfs.c (procfs_ops),
+	remote-adapt.c (adapt-ops),
+	remote-eb.c (eb_ops),
+	remote-es1800.c (es1800_ops, es1800_child_ops),
+	remote-hms.c (hms_ops),
+	remote-mm.c (mm_ops),
+	remote-nindy.c (nindy_ops),
+	remote-st2000.c (st2000_ops),
+	remote-udi.c (udi_ops),
+	remote-vx.c (vx_ops, vx_run_ops),
+	remote.c (remote_ops),
+	target.c (dummy_target),
+	xcoffexec.c (exec_ops): added static initializer for
+	to_notice_signals.
+	* xm-irix4.h, xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE): removed.
+
+Tue Oct  6 12:13:08 1992  John Gilmore  (gnu@cygnus.com)
+
+	* main.c (define_command):  Add forgotten initializer.
+
+Tue Oct  6 02:23:17 1992  John Gilmore  (gnu@cygnus.com)
+
+	* language.c, language.h:  Move saved_language out to global
+	expected_language.  Set expected_language when user expectation
+	changes.
+	* language.c (language_info):  Don't print type/range checking gub.
+	* main.c (main):  Set expected language.
+	(execute_command):  Check against expected language.
+	* symfile.c (set_initial_language):  Set expected language.
+
+	* configure.in, config/i386sol2.{mh,mt}:  Preliminary Solaris-x86 conf.
+
+Fri Sep  4 00:34:30 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	A bunch of changes mostly to improve debugging of C++ programs.
+	Specifically, the calling of inferiors methods is improved.
+
+	* value.h:  New macros METHOD_PTR_IS_VIRTUAL,
+	METHOD_PTR_FROM_VOFFSET, METHOD_PTR_TO_VOFFSET to partially
+	hide the implementation details of pointer-to-method objects.
+	How to tell if the pointer points to a virtual method is
+	still very dependent on the particular compiler, but this
+	should make it easier to find the places to change.
+	* eval.c (evaluate_subexp [case OP_FUNCALL]), valprint.c
+	(val_print [case TYPE_CODE_PTR]):  Use the new METHOD_PTR_*
+	macros, instead of a hard-wired-in code that incorrectly
+	assumed a no-longerused representation of pointer-to-method
+	values.  And otherwise fix the relevant bit-rotted code.
+
+	* valprint.c (type_print_base [case TYPE_CODE_STRUCT]):
+	If there are both fields and methods, put a space between.
+
+	* stabsread.c (read_struct_type):  Fix bug in handling of
+	GNU C++ anonymous type (indicated by CPLUS_MARKER followed
+	by '_').  (It used to prematurely exit the loop reading in
+	the fields, so it would think it should start reading
+	methods while still in the fields.  This could crash gdb
+	given a gcc that can emit nested type information.)
+
+	* valops.c (search_struct_method):  Pass 'this' value by
+	reference instead of by value.  This provides a more
+	consistent interface through a recursive search where the
+	"bottom" functions may need to adjust offsets (due to multiple
+	inheritance).
+	* valops.c, value.h, values.c:  Pass extra parameters to
+	value_fn_field and value_virtual_fn_field so we can
+	correctly adjust offset for multiple inheritance.
+	* eval.c (evaluate_subexp [case OP_FUNCALL]):  Simplify
+	virtual function calls by using value_virtual_fn_field().
+	* values.c: New function baseclass_offset, derived from
+	baseclass_addr (which perhaps can be made obsolete?).
+	It returns an offset rather than an address.  This is a
+	cleaner interface since it doesn't mess around allocating
+	new values.
+	* valops.c (search_struct_method):  Use baseclass_offset
+	rather than baseclass_addr.
+
+Mon Oct  5 16:02:04 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Re-install 29K/UDI stuff.
+	* remote-udi.c (udi_resume):  Clean up.
+	* (udi_wait):  Rewrite, leave out bugs.
+	* Add debugging code to print out all register fetches and stores.
+	* Straighten out target_ops.
+	* tm-29k.h (DUMMY_FRAME_RSIZE):  Pad out to doubleword.
+
+Mon Oct  5 09:46:44 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-udi.c (udi_create_inferior): run with no arguments should
+	not pass the program name as an argument, since the UDI code
+	already handles that.
+	(udi_load): get the symbols from prog_name, not arg_string (the
+	load command should really use arg_string as the program name, not
+	prog_name, but at least the run command works now).
+
+	* munch: HP9000/300 nm puts an extra space between T and symbol
+	name.
+
+	* config/irix4.mh: added -lsun to XM_CLIBS to get RPC functions
+	needed for vxworks targets.
+
+Fri Oct  2 22:04:42 1992  John Gilmore  (gnu@cygnus.com)
+
+	* am29k-tdep.c (_initialize_29k):  Make it possible for the
+	user to set and query the address where function calls into the
+	inferior write a small scratch routine.  `set call_scratch_address'
+	* inferior.h (PC_IN_CALL_DUMMY):  Fix fencepost error.
+	* remote.c (remote_prepare_to_store): Only fetch regs if they are
+	not already cached validly.
+
+Thu Oct  1 14:36:42 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Rs6000 native support.
+
+	* infptrace.c: remove #ifdef USG from around include ptrace.h.
+	  machines without this header should not be compiling this file.
+	* nm-rs6000.h, rs6000-nat.c: new files for native support.
+	* rs6000-tdep.c: do not include sys/ptrace.h or sys/reg.h.
+	* rs6000-xdep.c: removed.  all code now in rs6000-nat.c.
+	* xm-rs6000.h: do not include ptrace.h.
+	  (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to nm-rs6000.h.
+	* config/rs6000.mh (XDEPFILES): removed rs6000-xdep.o.
+	  infptrace.o and inftarg.o move to NATDEPFIES.
+	  (NAT_FILE, NATDEPFILES): new macro for native support.
+
+	Sun3 native support.
+
+	* config/sun3os3.mh, config/sun3os4.mh (NAT_FILE, NATDEPFILES):
+	  new macros for native support.
+	  (XDEPFILES): moved infptrace.o and inftarg.o to NATDEPFILES,
+	  removed sun3-xdep.o.
+	* xm-sun3.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
+	  nm-sun3.h.
+	* sun3-xdep.c: removed.  All code is now in sun3-nat.c.
+	* sun3-nat.c, nm-sun3.h: new files for native support.
+
+Thu Oct  1 10:30:54 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (dbsize):  New variable to hold size of dwarf info.
+	* dwarfread.c (dwarf_build_psymtabs):  Rename dbsize parameter to 
+	dbfsize and use it to initialize new local file scope dbsize.
+	* dwarfread.c (read_ofile_symtab):  Initialize dbsize and use it.
+	* dwarfread.c (basicdieinfo):  Use dbsize to check for oversize
+	DIEs as well as the current check for undersize DIEs.  This helps
+	to gracefully detect and reject corrupted DIE information.
+
+Thu Oct  1 01:57:56 1992  John Gilmore  (gnu@cygnus.com)
+
+	Add `command hooks' and a hook for inferior program stopping.
+
+	* command.h (struct cmd_list_element):  Remove unused `aux'
+	field.  Add new `hook', `hookee', and `cmd_pointer' fields.
+	* command.c (add_cmd):  Initialize new fields, elim old.
+	(add_alias_cmd):  Clone new fields.
+	(delete_cmd):  Un-hook hookee if we're deleting hook.
+	(help_cmd):  Tell user the command is hooked, if it is.
+	(lookup_cmd_1):  Abbreviations return the original command
+	instead of themselves, so that hooks on the original cmd will be
+	run.
+	* defs.h (enum command_class):  Add class_pseudo and comments.
+	* gdbcmd.h (execute_user_command):  Add prototype.
+	* infrun.c (normal_stop):  If the stop command is hooked,
+	run the hook whenever we stop.
+	(hook_stop_stub):  Stub for catch_errors.
+	(_initialize_infrun):  Set up pseudo "stop" command.
+	* main.c (execute_user_command):  Code extracted from execute_command.
+	(execute_command):  If hooked, run the hook before the command.
+	(define_command):  If defining a new hook, check the command it
+	is hooking, and warn if none.  Install the hook.
+	* source.c (_initialize_source):  "l" is an abbrev for "list".
+	* doc/gdb.texinfo:  Document command hooks.
+
+	* Makefile.in (VERSION):  Roll to 4.6.7.
+	* config/sun4os4.mh:  Remove dup inftarg.o from NATDEPFILES.
+	* infrun.c (breakpoints_inserted):  Make it static again.
+	* tm-symmetry.h (FLOAT_INFO):  #if 0 it for cross-ptrace abuse.
+
+Wed Sep 30 15:33:22 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Native file renaming.
+
+	* nat-sparc.c -> sparc-nat.c
+	* nat-sun4os4.h -> nm-sun4os4.h
+	* nat-trash.h -> nm-trash.h
+	* config/sun4os4.mh: track file renaming.
+	* configure.in: link to nm.h rather than nat.h.
+	* infptrace.c: include nm.h rather than nat.h.
+
+Tue Sep 29 14:35:00 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Host/target/native split for sun4.
+
+	* Makefile.in (TSOBS): removed corelow.o.
+	* infptrace.c: included nat.h.
+	* nat-trash.h: temporary header file.  This should be removed once
+	  all hosts have the native/host/target split.
+	* configure.in: add a symlink from nat-trash.h to nat.h if no
+	  other nat file exists for this configuration.
+	* sparc-tdep.c: no longer include sys/ptrace.h.
+	* sparc-xdep.c: removed.  contents have been moved to nat-sparc.c.
+	* xm-sparc.h (ATTACH_DETACH, FETCH_INFERIOR_REGISTERS): moved to
+	  nat-sun4os4.h.
+	* nat-sparc.c, nat-sun4os4.h: new files for sun4 native support.
+	* config/sun4os4.mh (XDEPFILES): moved infptrace.o and inftarg.o
+	  to NATDEPFILES.  removed sparc-xdep.o.
+	  (NATDEPFILES, NAT_FILE): new macros for native support.
+
+	Break the direct connection from core_file_command to any
+	particular type of core file support.
+
+	* target.h (find_core_target): new prototype.
+	* target.c (find_core_target): new function.  Walks the target
+	  list looking for the core target.
+	* core.c (core_file_command): replace calls to core_detach and
+	  core_open with find_core_target and direct calls.
+
+Tue Sep 29 10:19:00 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* xm-hp300hpux.h: define MEM_FNS_DECLARED; include <sys/ptrace.h>
+	for infptrace.c.
+	config/hp300hpux.mh: ALLOCA1 was not defined.
+
+Mon Sep 28 22:03:41 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* breakpoint.c, exec.c, language.c, main.c, printcmd.c, symfile.c,
+	target.c, valprint.c:  Use unfiltered forms of f/printf, et. al.
+	until we can figure out a better way to do paging.
+
+Sat Sep 26 02:07:31 1992  John Gilmore  (gnu@cygnus.com)
+
+	* findvar.c (supply_register):  Add CLEAN_UP_REGISTER_VALUE hook.
+	* tm-hppa.h (CLEAN_UP_REGISTER_VALUE):  Use it.
+	* hppa-coredep.c:  Remove, now that we use the hook.
+	* config/hppab.mh, config/hppah.mh:  Use standard coredep.o.
+	* hppab-xdep.c, hppah-xdep.c:  Remove custom code, use hook.
+
+	* dbxread.c, partial-stab.h:  Replace all #ifdef hp9000s800's with
+	GDB_TARGET_IS_HPPA's.  This is a SERIOUS KLUDGE.  The code needs to all
+	be ripped out and reimplemented right (see elfread.c).
+	* tm-hppa.h (GDB_TARGET_IS_HPPA):  Define.
+
+	Rename all HPPA files to fit into unique DOS filenames:
+	* *hppabsd*  => *hppab*
+	* *hppahpux* => *hppah*
+
+Sat Sep 26 00:25:15 1992  John Gilmore  (gnu@cygnus.com)
+
+	Make the /proc support a target-struct in its own right.
+
+	* Makefile.in: Remove inftarg.[co], since it is now included via
+	config/*.mh files.
+	* config/*.mh:  Add inftarg.o and fork-child.o to all *.mh that
+	reference infptrace.o.  Add fork-child.o to all *.mh that
+	reference procfs.o.
+
+	* inferior.h (proc_wait, inferior_proc_init, proc_set_exec_trap):
+	No longer global functions.
+	(fork_inferior):  New global function from fork-child.c.
+	* inftarg.c (child_wait):  Remove USE_PROC_FS conditional.
+	(ptrace_me, ptrace_him):  New stub functions for fork_inferior().
+	(child_create_inferior):  Moved to fork-child.c as fork_inferior.
+	(child_create_inferior):  New tiny function that calls fork_inferior.
+	* fork-child.c:  New file, containing fork_inferior, which is
+	built from slight mods to inftarg.c's child_create_inferior.
+
+	* procfs.c (procfs_ops):  Add target vector.
+	(attach):  Rename as static do_attach.
+	(procfs_create_inferior):  New tiny function that calls fork_inferior.
+	(child_xfer_memory):  Rename to static procfs_xfer_memory.
+	(store_inferior_registers):  Rename to static procfs_store_registers.
+	(inferior_proc_init):  Rename to static procfs_init_inferior.
+	(procfs_attach, procfs_detach, procfs_prepare_to_store,
+	procfs_files_info, procfs_open, procfs_mourn_inferior,
+	procfs_can_run):  Slightly mangled copies of the corresponding
+	child_XXX routines from inftarg.c.
+	(proc_wait):  Renamed to static procfs_wait.
+	(child_resume):  Rename to static procfs_resume.
+	(fetch_inferior_registers):  Rename to static procfs_fetch_registers.
+	(initialize_proc_fs):  Rename to initialize_procfs.  Set up
+	procfs_ops, too.
+
+	* putenv.c:  index -> strchr.
+	* regex.c:  Always rename bcopy to memcpy, etc.
+	FIXME:  Eventually do the renames rather than use #define's.
+	* sparc-tdep.c (deferred_stores):  Moved from sparc-xdep.c.
+	Fix bcopy->memcpy.
+	* sparc-xdep.c:  Move deferred_stores to target dependent.
+	* xm-irix4.h, xm-sysv4.h (CREATE_INFERIOR_HOOK):  No longer needed.
+
+Fri Sep 25 21:59:27 1992  John Gilmore  (gnu@cygnus.com)
+
+	Split non-target-dependent code out of target_attach routines.
+
+	* target.h:  Comments on target_attach args and results.
+	* infcmd.c (attach_command): Check for existing execution, call
+	target_attach, set up terminal status and wait_for_inferior, wait
+	for the attach status, and do normal_stop.
+	* inftarg.c (child_attach):  Remove target independent stuff.
+	* remote-adapt.c (adapt_attach):  Ditto.
+	* remote-mm.c (mm_attach):  Ditto.
+	* remote-udi.c (udi_attach):  Ditto.
+	* remote-vx.c (vx_attach):  Ditto.
+
+	Cleanup.
+
+	* remote-hms.c (hms_attach):  Remove completely, it was useless.
+	* remote-mm.c, remote-hms.c, remote-udi.c, remote-adapt.c:  Remove
+	commented-out start_remote calls.
+	* remote-hms.c, remote-adapt.c, remote-mm.c, remote-udi.c: Remove
+	DENTER and DEXIT macros and their calls.  Use a real debugger --
+	like gdb -- to see what functions are being called when.
+	* utils.c (strcmp_iw):  Make nonstatic, for lint.
+
+Fri Sep 25 18:48:20 1992  John Gilmore  (gnu@cygnus.com)
+
+	* infrun.c, inftarg.c, inferior.h:  Comment and lint cleanups.
+
+Fri Sep 25 15:13:44 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* tm-sparc.h, dbxread.c (read_ofile_symtab):  Install Jim Wilson's
+	fix to differentiate between gcc1 & gcc2 compiled files so that we
+	can debug calls that pass structs as args correctly.
+	* symmisc.c (dump_symtab):  If block was compiled with gcc, say
+	so, and what version.
+
+	* remote.c (remote_wait):  Make regs be char to avoid picayune
+	ANSI compiler warnings.
+
+	* energize.h:  Move all external struct decls to inside of
+	__STDC__, add prototype for energize_shell_wait().
+	* energize.c (getpty):  Clean up, make us really get a controlling
+	terminal.
+	* (energize_initialize):  Disable SIGIO prior to setting up for
+	I/O interrupts.  Move setsid(), et. al. to getpty().
+	* (energize_shell_wait):  New routine to wait for things started
+	via the shell command, uses wait() instead of /dev/proc.
+	* Also, add prototype for execute_command_1().
+
+Fri Sep 25 12:09:33 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* inftarg.c (child_create_inferior, child_attach,
+	  child_mourn_inferior): collect unix child process stratum
+	  functions which live below the target vector into this file to
+	  facilitate host/target/native split.  Also, make them static.
+	* inflow.c (child_mourn_inferior): removed.
+	* infrun.c (child_create_inferior, child_attach): removed.
+	  (resume): becomes global so that functions below the
+	  target vector can find it.
+	* inferior.h (resume): add prototype.
+	  (child_mourn_inferior, child_create_inferior, child_attach):
+	  remove prototypes.
+
+	* xcoffexec.c (exec_ops): child_attach and child_create_inferior
+	  replaced with find_default_attach and
+	  find_default_create_inferior.
+
+Fri Sep 25 10:21:04 1992  Ken Raeburn  (raeburn@rtl.cygnus.com)
+
+	* i960-pinsn.c: Use _filtered routines for printing, so symbolic
+	addresses don't get displayed in the wrong positions.
+
+Fri Sep 25 09:52:47 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+        Separate core functions along target vector in preparation for
+        native support.  Functions above vector now live in core.c.  Those
+        below in corelow.c.
+
+	* core.c (solib_add_stub, core_close, core_open, core_detach,
+	  get_core_registers, core_files_info, core_ops): moved to corelow.c
+	  (_initialize_core): removed addition of core_ops target.
+	* corelow.c: new file.
+	(solib_add_stub, core_close, core_open, core_detach,
+	get_core_registers, core_files_info, core_ops): moved from core.c
+	(_initialize_corelow): new function.
+	* gdbcore.h (core_open, core_detach): added prototypes.
+	(core_ops): add forward declaration.
+	* Makefile.in (SFILES_MAINDIR): add core.c
+	(OBS): add core.o
+	(TSOBS): change core.o to corelow.o
+
+Wed Sep 23 11:14:53 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* m68k-tdep.c (m68k_saved_pc_after_call):  Use 'GDB_TARGET_IS_SUN3'
+	instead of 'sun' predefined symbol so that trap analysis code is
+	enabled only when the TARGET is a sun3.
+
+Tue Sep 22 17:13:19 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* tm-i960.h (ext_format_i960): Add top-level declaration.
+	(REGISTER_CONVERT_TO_{VIRTUAL,RAW}): Don't declare it in nested
+	blocks, else Sun4 compiler complains.
+
+Tue Sep 22 00:43:51 1992  John Gilmore  (gnu@cygnus.com)
+
+	* mips-pinsn.c (print_insn_arg, case 'B'):  Disassemble `break'
+	instruction's argument.  Patch from jonathan@cs.stanford.edu
+	(Jonathan Stone).
+
+Mon Sep 21 18:16:30 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Break the thread of control that implies that a unix child
+	process will be the default target.
+
+	* target.c (find_default_run_target, find_default_attach,
+	find_default_create_inferior, return_zero):  new functions.
+	(cleanup_target):  Make return_zero the default for to_can_run.
+
+	* exec.c (exec_ops), core.c (core_ops):  Replace child_attach and
+	child_create_inferior references with find_default_XXX instead.
+
+	* target.h (struct target_ops): new field, to_can_run.
+	(find_default_attach, find_default_create_inferior):  new prototypes.
+	(target_can_run): new macro.
+
+	* Also added a zero (default) to_can_run element to all static
+	struct target_ops initializations throughout GDB, except: 
+	* inftarg.c (child_ops): Use new child_can_run() to enable child runs.
+
+	* infrun.c (child_create_inferior):  Clean up error handling when
+	no exec file is specified.
+	(child_attach):  Don't require exec file.
+
+Mon Sep 21 19:43:13 1992  John Gilmore and K. Richard Pixley (gnu@cygnus.com)
+
+	Remove kill_inferior_fast, in favor of target_kill, which goes
+	through the target vector.
+
+	* inferior.h (kill_inferior_fast): remove declaration.
+
+	* main.c (disconnect): call quit_cover using catch_errors rather
+	than calling kill_inferior_fast directly.  New way goes through
+	the target vector, handles attached processes, and writes
+	command history if appropriate.
+	(quit_cover): new function, wrapper for quit_command.
+
+	* convex-xdep.c, go32-xdep.c, hppabsd-xdep.c, hppahpux-xdep.c,
+	infptrace.c, procfs.c:  Removed all instances of kill_inferior_fast,
+	inlining them into the local kill_inferior when needed.
+
+Mon Sep 21 19:23:05 1992  John Gilmore  (gnu@cygnus.com)
+
+	* infrun.c (_initialize_infrun):  Alias `i handle' == `i signals'.
+	* stabsread.c (read_struct_type): Simplify complicated expression
+	for dumb DECstation compiler.
+
+Mon Sep 21 14:54:35 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* m68k-pinsn (print_insn_arg, fetch_arg): added support for
+	operands to memory management instructions, from WRS.
+
+Sep 20 08:42:12 1992  Fred Fish  (fnf@cygnus.com)
+
+	* main.c (main):  Back out previous language setting changes.
+	Replace with simple default to C before processing any init
+	files.  There MUST be a language set, even in the absence of
+	init files or executables, or expression parsing fails.
+
+Sat Sep 19 09:52:26 1992  Fred Fish  (fnf@cygnus.com)
+
+	* main.c (main):  Move code that sets initial language to
+	symfile.c.  Fixup places where command files are processed to
+	be consistent in setting a default language if none has been
+	previously set.
+	* symfile.c (set_initial_language):  Add code moved from
+	main() that sets an initial default language when a new
+	symbol file is read.
+	* symfile.c (symbol_file_command):  Call set_initial_language.
+	* symtab.c (find_main_psymtab):  Add FIXME comment.
+
+Wed Sep 16 22:31:55 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* breakpoint.c, sparc-tdep.c: comment changes.
+	* configure.in: removed target_dependent line.
+
+	* remote-mm.c (mm_attach): change printf to error to prevent
+	fallthrough bug.
+	* remote-udi.c (udi_attach): change printf to error to prevent
+	fallthrough bug.
+
+	* rs6000-tdep.c (push_dummy_frame, pop_dummy_frame): replace
+	calls to {fetch|store}_inferior_registers with calls to
+	target_{fetch|store}_registers, for remote-target independence.
+
+Sat Sep 19 04:23:54 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in:  Fix bug I introduced in merging Rich's change.
+	* infrun.c (child_create_inferior):  Use proceed() rather than
+	doing all the same stuff by hand.
+
+Thu Sep 17 17:35:37 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* Makefile.in, configure.in: add support for files used only when
+	configured native, that is, when host = target.
+
+Wed Sep 16 23:03:23 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* tm-sparc.h, xm-sparc.h: externs and macros relating to deferred
+	stores are target dependent and were moved from xm to tm.
+
+Sat Sep 19 03:14:37 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (gdb-all.texi):  Build in objdir, not $srcdir.
+
+	* config/decstation.mh:  Add MMALLOC_LIB and MMALLOC_DISABLE
+	overrides, to avoid problem in xdr_bytes with malloc(0) => 0.
+
+Wed Sep 16 20:04:54 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* target.h (struct target_ops):  removed to_convert_to_virtual and
+	to_convert_from_virtual elements.  Initializations removed from
+	all static initializations.
+	(target_convert_to_virtual, target_convert_from_virtual):
+	removed.
+	(host_convert_to_virtual, host_convert_from_virtual):  Removed
+	forward declarations.
+	* target.c (cleanup_target): removed default assignments for
+	to_convert_to_virtual and to_convert_from_virtual.
+	* inftarg.c (host_convert_to_virtual, host_convert_from_virtual):
+	removed.
+	* findvar.c (value_of_register, value_from_register):  
+	target_convert_to_virtual inlined.
+	* infcmd.c (do_registers_info):  target_convert_to_virtual inlined.
+	* valops.c (value_assign):  target_convert_from_virtual inlined.
+
+Fri Sep 18 02:07:39 1992  John Gilmore  (gnu@cygnus.com)
+
+	* main.c (gdb_readline):  Avoid printf_filtered, which sets char
+	position wrong if used for the prompt.
+	* utils.c (puts_filtered):  Comment:  NOT a puts() replacement!
+
+	Support for accessing arbitrary MIPS stack frames in memory.
+
+	* blockframe.c (get_prev_frame_info):  If INIT_FRAME_PC_FIRST is
+	set, run it before INIT_EXTRA_FRAME_INFO.
+	* stack.c (frame_info):  If PRINT_EXTRA_FRAME_INFO defined, call it.
+
+	* mips-tdep.c (init_extra_frame_info): Only clobber the `frame'
+	(FP) value in the frame_info struct if it is zero (as from top of
+	execution stack).
+	(setup_arbitrary_frame):  Implement FRAME_SPECIFICATION_DYADIC.
+
+	* mips-xdep.c (fetch_inferior_registers):  ZERO_REGNUM always
+	comes back as zero.  So does FP_REGNUM, as a trigger for
+	init_extra_frame_info.
+
+	* tm-mips.h (INIT_FRAME_PC_FIRST):  Kludge, FIXME, defined to get
+	the program counter set before INIT_EXTRA_FRAME_INFO is run.
+	(INIT_FRAME_PC):  Defined to null.
+	(PRINT_EXTRA_FRAME_INFO): print frame pointer location via symtab.
+	(FRAME_SPECIFICATION_DYADIC):  Ask for two args in frame command.
+	Briefly explain MIPS stacks in GDB.
+
+Thu Sep 17 03:49:59 1992  John Gilmore  (gnu@cygnus.com)
+
+	* copying.awk, copying.c (show_copying_command,
+	show_warranty_command):  Rename from copying_info, warranty_info,
+	to match command function conventions.
+
+	* utils.c (prompt_for_continue):  Reinitialize more-counts
+	before printing anything, and again afterward.  Fix comments.
+	(vfprintf_filtered):  Eliminate static buffer; use auto buffer,
+	or alloca() if needed.
+
+	* rs6000-xdep.c:  Use correct conditional (IBM6000_TARGET) to
+	detect native versus cross-host.
+
+Wed Sep 16 21:57:14 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* m68k-tdep.c (sun3_saved_pc_after_call):  Only do trap check for
+	Suns.  Rename to m68k_saved_pc_after_call.
+	* tm-68k-noun.h, tm-sun3.h (SAVED_PC_AFTER_CALL):  Use
+	m68k_saved... instead of sun3_saved...
+
+Wed Sep 16 17:00:07 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (update-depend, update-alldeps): Split out of
+	setup-to-dist, for convenience in rebuilding the depend and
+	alldeps.mak files.
+	(assorted):  Update to catch straggler files when building gdb.tar.Z.
+
+Tue Sep 15 01:18:50 1992  John Gilmore  (gnu@cygnus.com)
+
+	Preliminary cleanup for splitting host/native/target.
+
+	* infptrace.c (child_resume):  Don't deal with NO_SINGLE_STEP
+	here; it is dealt with at a gdb-target-independent level.
+	* rs6000-tdep.c (single_step):  Don't call ptrace, we are a
+	high toned routine.  Fix return type to void.
+	* tm-rs6000.h (AIX_BUGGY_PTRACE_CALL): Zap, we think we fixed it.
+	Rich and I believe the "real problem" was that both single_step
+	and target_resume were issuing PT_CONTINUE calls.  This would
+	cause the second PT_CONTINUE to sometimes fail because the process
+	was already running.
+	* infptrace.c (child_resume):  Remove AIX_BUGGY_PTRACE_CALL kludge.
+
+Mon Sep 14 19:20:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* energize.c (pty_to_kernel):  Must check for EAGAIN as
+	termination condition.
+	(full_filename):  Don't prepend dirname if filename begins with /.
+	(breakpoint_notify, kernel_dispatch):  Deal with DynamicLoad
+	messages properly!!
+	(getpty (NCR)):  Lotsa bug fixes...
+	(kernel_dispatch (case StopRType)):  Use kill() instead of
+	killpg() so we can deal with losing systems...
+	(wait_for_events):  Work around NCR select() lossage.  It doesn't
+	zero out readfds when select() returns zero.
+	(energize_initialize):  Use I_SETSIG to get SIGIO interrupts.  Use
+	getcwd() instead of getwd() (NCR getwd() seg faults).
+	(energize_wait):  Use sigaction() for NCR.  Their version of signal()
+	is unreliable by default.
+
+	* procfs.c (proc_wait):  Call print_sys_errmsg() if we get an
+	error from PIOCSWSTOP.
+
+	* breakpoint.c, core.c, exec.c, language.c, main.c, printcmd.c,
+	symfile.c, target.c, valprint.c:  Use _filtered form of *printf.
+	defs.h, utils.c:  Make vfprintf_filtered global.
+
+	* energize.c (send_location):  New routine to consolidate all
+	places where we must notify kernel of where the given pc is.
+	(cplus_demangle):  Put single-quotes around demangled names.
+	(energize_call_command):  Call send_location() after doing up,
+	down, and frame commands.
+
+Fri Sep 11 18:28:28 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* doc/gdb.texinfo, doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: first
+	pass at doc for two new remote targets---29K using UDI, and Tandem
+	ST2000 using STDBUG.
+
+	* doc/all.m4, doc/none.m4: new m4 switch, _ST2000__
+
+	* doc/all.m4: turn on H8/300 stuff for generic manual
+
+	* doc/gdbinv-s.m4.in: remove text on special procedures to continue 
+	after explicit call to breakpoint() in serial stubs.
+
+Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
+
+	* mipsread.c:  Clean up some white space.
+	(parse_symbol):  Handle stEnd of stFile.
+	(parse_partial_symbols):  Remove old #if 0'd code.  Handle stLocal.
+
+	* mips-xdep.c (REGISTER_PTRACE_ADDR, fetch_inferior_registers,
+	store_inferior_registers):  Replace unexplained numbers
+	with manifest constants from a DECstation header file.
+	* xm-mips.h (KERNEL_U_ADDR):  Get from <machine/param.h>.
+	(REGISTER_U_ADDR):  Fix up for Ultrix 4.2.
+
+	* tm-tahoe.h, xm-tahoe.h (KERNEL_U_ADDR):  Move macro to xm-tahoe.h.
+
+	* stack.c (_initialize_stack):  "dow" should be a valid abbreviation
+	for "down".  Suggested by Richard Stallman.
+
+Thu Sep 10 15:26:07 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* remote-vx.c: Rename realloc for inclusion of rpc/rpc.h, to avoid
+	redeclaration bug on SunOS 4.
+
+Wed Sep  9 17:36:53 1992  John Gilmore  (gnu@cygnus.com)
+
+	* i386-stub.c, sparc-stub.c (getpacket):  Actually check checksums.
+	* m68k-stub.c:  Remove a few extraneous ANSI-isms.
+	* remote-nindy.c (nindy_prepare_to_store):  Only fetch regs if 
+	they aren't already there.
+	* remote-vx.c (vx_prepare_to_store):  Ditto.
+	* xcoffread.c:  Surround forward struct defns with #ifdef __STDC__.
+
+Wed Sep  9 16:50:22 1992  John Gilmore  (gnu@cygnus.com)
+
+	Removed a large number of changes inserted by Per Bothner
+	for C++ support.  These will go back in when they've been
+	examined.
+
+Tue Sep  8 21:05:18 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* serial.h:  Fix prototye for serial_raw().
+	* ser-bsd.c, ser-termios.c:  Fix args for serial_open() &
+	serial_write() to match prototypes.
+	* remote-st2000.c (get_reg_name):  Make *p be const.
+
+Tue Sep  8 17:24:52 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* remote-nindy.c (nindy_fetch_registers): Make return type void,
+	to agree with target structure field type.
+	(nindy_store_registers): Ditto.
+
+	* Makefile (OPCODES): New var, pointing to opcodes library.
+	(CLIBS, CDEPS): Include it.
+	(saber_gdb): Load opcodes library.
+
+Tue Sep  8 15:22:06 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* a68v-xdep.c (store_inferior_registers):  declare as void.
+	* infptrace.c:  HP/Apollos have ptrace.h in the wrong place.
+	* remote-st2000.c:  Massive changes to use new serial package.
+	Also added 'connect' command to transparantly connect to serial
+	port.
+	* ser-termios.c:  Big cleanup, use nicer coding conventions.
+	* ser-bsd.c:  New module, serial stuff for BSD systems.
+	* serial.h:  Define struct ttystate properly using HAVE_TERMIO.
+	* xm-apollo68b.h:  #define PTRACE_IN_WRONG_PLACE...
+
+Fri Sep  4 18:53:57 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* doc/gdb.texinfo: fix shameful error of agreement reported by
+	jimb@occs.cs.oberlin.edu (Jim Blandy)
+	* doc/gdb.texinfo: remove old partial discussion of remote serial
+	protocol (via serial debug stubs)
+	* doc/gdbinv-m.m4.in, doc/gdbinv-s.m4.in: new section discussing
+	use of serial debug stubs
+
+Fri Sep  4 00:34:30 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* symfile.h:  Declaration of set_demangling_style() moved
+	here from demangle.h (which is now in ../include).
+	* i386-xdep.c:  Update comment.
+
+Thu Sep  3 13:44:46 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* symtab.c (completion_list_add_symbol): restructured to optimize
+	for time.  First clip names that cannot match.  Then clip any
+	names we've already considered.  Drop a redundant strncpy.  Drop
+	a redundant malloc and associated free for demangled names.
+
+Thu Sep  3 09:17:05 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* a68v-xdep.c (store_inferior_registers):  Define as type void.
+	* configure.in:  Add host m68k-apollo*-bsd*.
+	* demangle.c (struct demanglers):  Use enum instead of constant
+	value to keep braindamaged HP/Apollo compiler happy.
+
+Wed Sep  2 20:45:31 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* utils.c (strcmp_iw):  Add a hack to allow "FOO(ARGS)" to
+	match "FOO".  This allows 'break Foo' to work when Foo is
+	a mangled C++ function.  (See comment before function.)
+
+Wed Sep  2 13:45:27 1992  John Gilmore  (gnu@cygnus.com)
+
+	* config/rs6000.mh (MH_CFLAGS):  Circumvent IBM <rpc/rpc.h> bug,
+	for files in vx-share/*.c.
+	* xm-rs6000.h (fd_set):  Circumvent the rs6000.mh circumvention,
+	for normal GDB source files.
+
+	* Makefile.in (VERSION):  Roll to 4.6.6.
+
+	* tm-vx68.h, tm-es1800.h:  Use tm-68k.h rather than tm-sun3.h.
+	* tm-sun3.h:  Remove STACK_END_ADDR, no longer used.
+	* tm-sun3os4.h:  Update comments.
+	* xm-delta88.h:  Remove STACK_END_ADDR.
+
+Wed Sep  2 01:18:31 1992  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to 4.6.5.
+
+	* infrun.c:  Lint for recent `handle' changes.
+
+	* ser-termios.c, ser-go32.c:  Remove DEFUN crap, clean up.
+	* serial.h (EXFUN):  Remove all uses, convert to PARAMS.
+	* config/sun4os4.mh:  Include ser-termios.o.  FIXME, all .mh files
+	should include a ser-XXX.o module.
+
+	* dbxread.c (elfstab_build_psymtabs):  Remove DEFUN crap.
+	* defs.h, i960-pinsn.c, remote-hms.c:  Replace CONST with simple const.
+
+	* configure.in:  Map unrecognized sun 68k's, sun sparcs, into 
+	known suns in configure.in, rather than mapping them to unique
+	config files that happen to duplicate other config files.
+	* config/sun3.{mh,mt}:  Remove (use identical sun3os4.*).
+	* config/sun4.{mh,mt}:  Remove (use identical sun4os4.*).
+
+Wed Sep  2 00:10:43 1992  John Gilmore  (gnu@cygnus.com)
+
+	* configure.in (*-*-sunos*):  Use trailing * to match all
+	sub-variants of SunOS, e.g. sunos4* to match sunos4.1.1.
+	(sparc-*-sunos3):  Remove host & target.  Sunos3 never shipped
+	in production on Sun-4.
+	({a29k,i[34]86,i960}-*-elf):  Add targets, equivalent to coff.
+	(m68k-*-{aout,coff,elf}):  Add targets, w/new config and tm files.
+	(sparc-*-{aout,coff,elf}):  Add targets, w/new config and tm files.
+
+	* config/m68k-un.mt, config/m68k-noun.mt, config/sparc-un.mt,
+	config/sparc-noun.mt:  New target configs for embedded.
+	* config/sun4os3.{mh,mt}:  Remove, never existed in production.
+
+	* tm-68k-un.h, tm-68k-noun.h, tm-spc-un.h, tm-spc-noun.h:  New
+	target definitions for embedded with and without underlines on
+	identifiers.
+
+	* tm-sparc.h, tm-sun2.h, tm-sun3.h:  Delete NAMES_HAVE_UNDERSCORE:
+	not a parameter of the CPU, but of the development environment.
+	* tm-es1800.h, tm-sunos.h, tm-vx68.h:  Add NAMES_HAVE_UNDERSCORE.
+
+Tue Sep  1 17:31:45 1992  John Gilmore  (gnu@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set):  Avoid setting source symtab
+	(which involves reading in main's symtab) if we have no breakpoints.
+
+Mon Aug 31 13:47:45 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (cu_language):  New local variable to record
+	language for current compilation unit being processed.
+	* dwarfread.c (set_cu_language):  New local function to decode
+	and record language for current compilation unit being processed.
+	* dwarfread.c (synthesize_typedef):  Add local function to
+	synthesize a typedef for C++ classes, structs, unions, and
+	enumerations.
+	* dwarfread.c (read_structure_scope):  Synthesize typedefs
+	for C++ classes, structs and unions.
+	* dwarfread.c (read_enumeration):  Synthesize typedefs for
+	C++ enumerations.
+	* dwarfread.c (read_file_scope):   Call set_cu_language to
+	record language for current compilation unit.  After symtab
+	is built, save this recorded language.
+	* dwarfread.c (process_dies, add_partial_symbol, struct_type,
+	scan_partial_symbols, new_symbol):  Recognize TAG_class_type.
+	* dwarfread.c (add_partial_symbol):  Synthesize partial symbol
+	typedefs for C++ classes, structs, unions, and enumerations.
+	* dwarfread.c (scan_compilation_units):  Call set_cu_language
+	to record language for current compilation unit.	
+	* dwarfread.c (scan_partial_symbols):  Call add_enum_psymbol here
+	for TAG_enumeration_types, rather than in add_partial_symbol.
+	* dwarfread.c (add_partial_symbol):  Combine TAG_enumeration_type
+	case with class, struct, and union type cases, now that they are
+	the same.  Remove tests for non-NULL name attributes, now done
+	by callers.
+	* gdbtypes.h (TYPE_CODE_CLASS):  Add type for C++ classes, but
+	treat as alias for TYPE_CODE_STRUCT for now.
+
+Sun Aug 30 21:32:17 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Makefile.in: map "gdb" through program_transform_name when
+	installing.
+
+Sun Aug 30 21:18:51 1992  Fred Fish  (fnf@cygnus.com)
+
+	* {i386-tdep.c, m68k-tdep.c, mips-tdep.c, sparc-tdep.c}
+	  (supply_gregset, fill_gregset, supply_fpregset, fill_fpregset):
+	Use "regi" for local indexing through register numbers, reserving
+	"regno" for the name of a specific register passed as an input
+	parameter.  Fix bug propagated through all versions that sometimes
+	used regno as an index when it should have been regi, thus using
+	-1 as an index in some cases.
+
+Sun Aug 30 18:15:17 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* cplus-dem.c, demangle.h:  Moved to ../libiberty and ../include,
+	respectively, so same demangler can be used by other programs.
+	* Makefile.in:  Remove demangler stuff.
+	* Makefile.in (depend):  Pass -I../readline (needed for main.c).
+	* demangle.c (_initialize_demangler):  Tell demangler which
+	CPLUS_MARKER to assume.
+
+Fri Aug 28 13:13:33 1992  John Gilmore  (gnu@cygnus.com)
+
+	RS/6000 portability changes (for hosting cross-debuggers).
+
+	* breakpoint.c (fixup_breakpoints):  Re-kludge to IBM6000_TARGET.
+	* buildsym.c, rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h, 
+	xcoffexec.c, xcoffread.c:  Rename aixcoff to xcoff everywhere.
+	* printcmd.c (print_frame_args):  Remove an RS/6000 dependency.
+	* stabsread.c (define_symbol):  Remove RS/6000 dependencies.
+	* tm-rs6000.h (ATTACH_DETACH):  Remove: host-dependent.
+	(PTRACE_ATTACH, PTRACE_DETACH):  Remove: host-dep.
+	(NO_SINGLE_STEP):  Add, target-dependent.
+	(loadinfotextindex):  Lowercase, remove "aix_".
+	* xm-rs6000.h:  Add <sys/ptrace.h> for infptrace.c.
+	(NO_SINGLE_STEP):  Remove, target-dependent.
+	* xcoffexec.c (vmap_symtab):  Cleanup #if 0'd code.
+	* xcoffread.c:  Only build file if RS/6000 native GDB.
+	(build_function_symbol):  Remove #if 0'd code.
+	* rs6000-tdep.c:  Cleanup.  Add static fn protos.
+	Use CORE_ADDR for addresses throughout.  Make void fns void.
+	(pop_dummy_frame):  Add FIXME about bogosity of design here.
+	(rs6000_struct_return_address):  Ditto.
+	(frameless_function_invocation, frame_get_cache_fsr,
+	frame_initial_stack_address, xcoff_relocate_symtab,
+	xcoff_init_loadinfo, free_loadinfo, xcoff_add_toc_to_loadinfo,
+	add_text_to_loadinfo, find_toc_address):  Move from xdep file.
+	Use CORE_ADDRs.  Change identifiers to lowercase.
+
+	* rs6000-xdep.c:  Make whole file conditional on native RS/6000,
+	supplying dummy routines if non-native.  Add prototype for
+	static exec_one_dummy_insn.  Move a mess of functions to
+	rs6000-tdep.c (as above).  Remove #if 0'd code.
+
+	* config/rs6000.mh (XDEPFILES):  Move xcoffexec.o to target side.
+	(XM_CLIBS):  Add -lm to circumvent AIX 3.2 libc ldexp bug.
+	* config/rs6000.mt (TDEPFILES):  Adopt xcoffexec.o.
+
+	* gdbtypes.h (TYPE_ALLOC):  Parenthesize result to avoid problems
+	for callers.
+
+	* vx-share/README, nindy-share/README:  New files describing
+	how these directories' code is shared, and with whom.
+
+Thu Aug 27 20:04:56 1992  John Gilmore  (gnu@cygnus.com)
+
+	* configure.in (target configurations):  Reformat into table.
+	Remove unsupp. Amigados host and target.  Ditto Mach 386 target.
+
+	* tm-altosgas.h, tm-i386v-g.h:  Remove ancient coff encap configs.
+	* config/{altosgas.mt, i386v-g.mt, i386v32-g.mt}:  Ditto.
+	* config/{i386sco.mt,i386v32.mt}:  Remove; identical to i386v.mt.
+	* config/{go32.mt,i960.mt}:  Remove; they only printed error msgs.
+	* config/nindy960.mt:  Remove useless MT_CFLAGS setting.
+	* config/i386aout.mt:  Use tm-i386v.h, not tm-i386v-g.h.
+
+	* Makefile.in (config-check):  Add command to check whether
+	configure.in is consistent with config/*.
+
+Wed Aug 26 21:10:52 1992  John Gilmore  (gnu@cygnus.com)
+
+	* configure.in (host configurations):  Reformat nested cases into
+	easy-to-maintain table.
+	(m68k-altos-*, i386v*):  We don't care whether coff encap is used.
+	config/{altosgas.mh, i386v-g.mh, i386v32-g.mh}:  Remove.
+
+Wed Aug 26 16:02:01 1992  Fred Fish  (fnf@cygnus.com)
+
+	* cplus-dem.c:  Reorder args to most local functions to make them
+	follow the consistent pattern of struct work_stuff pointer first,
+	followed by pointer into string being demangled, followed by
+	pointer to the string where the result is being stored, followed
+	by other args.  Also generally replace most variables of name
+	"type" with "mangled" for consistency.  They all pointed to the
+	same string but half were one name and half the other.
+	* cplus-dem.c (LONGERNAMES):  Remove #ifndef's.
+	* cplus-dem.c (demangle_qualified):  Rewrite to clean up and allow
+	use whenever a qualified name is being demangled.
+	* cplus-dem.c (do_type):  Qualified names are treated similarly
+	to fundamental types, not as modifiers of fundamental types.	
+
+Mon Aug 24 20:44:38 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in:  Add sparclite as a target.
+
+	* sparc-stub.c (handle_exception):  Flush instruction cache just
+	before returning to the user.  (hexToInt):  Fix overzealous cleanup.
+
+Mon Aug 24 11:57:13 1992  Fred Fish  (fnf@cygnus.com)
+
+	* infrun.c (handle_command):  Rewrite to allow multiple signal
+	numbers, signal number ranges, and to recognize "all" to mean all
+	signals except those used by the debugger.
+	* infrun.c (SET_SIGS, UNSET_SIGS):  Macros used in handle_command
+	to set or reset actions for specific signals.
+
+Sun Aug 23 17:10:07 1992  Fred Fish  (fnf@cygnus.com)
+
+	* coffread.c (decode_type):  Call alloc_type to alloc new
+	types.
+	* stabsread.c (read_array_type, read_range_type, define_symbol):
+	Call alloc_type to alloc new types.
+	* stabsread.c (define_symbol):  Move dbl_valu symbol field data
+	from type_obstack to symbol_obstack.
+	* stabsread.c (define_symbol):  Move typedef_sym from type_obstack
+	to symbol_obstack.
+	* gdbtypes.h (TYPE_ALLOC):  New macro to allocate space for data
+	associated with a type, using the same mechanism as was used to
+	allocate space for the type structure itself.
+	* coffread.c (patch_type, coff_read_struct_type,
+	coff_read_enum_type):  Use TYPE_ALLOC.
+	* dwarfread.c (struct_type):  Use TYPE_ALLOC.
+	* gdbtypes.c (create_array_type, check_stub_method, 
+	allocate_cplus_struct_type):  Use TYPE_ALLOC.
+	* mipsread.c (parse_symbol, parse_type):  Use TYPE_ALLOC.
+	* stabsread.c (read_struct_type, read_array_type, read_enum_type,
+	read_range_type):  Use TYPE_ALLOC.
+
+Sun Aug 23 11:04:08 1992  Fred Fish  (fnf@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set):  Select a default source
+	symtab if one is not currently selected.
+	* utils.c (query):  Call wrap_here before building the output
+	query string, to turn off wrapping and flush any buffered output.
+	Otherwise our query may end up in the wrap buffer and never be
+	seen by the user.
+	* eval.c (evaluate_subexp):  Report error when attempting to
+	evaluate subscript for types without a target type, rather
+	than dumping core by using the NULL pointer.
+	* symfile.c (symbol_file_command):  Forget current_source_symtab
+	and current_source_line when discarding symbol table.
+
+Sat Aug 22 22:33:20 1992  John Gilmore  (gnu@cygnus.com)
+
+	Bug fixes from Andrew Heybey <ath@lcs.mit.edu>.
+
+	* tm-mips.h (REGISTER_VIRTUAL_TYPE):  Float regs are float type.
+	* mips-tdep.c (mips_print_register):  Alloc enough space for two regs.
+
+Fri Aug 21 15:17:03 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* remote.c (remote_open):  Fix baud rate setting to make -b flag
+	work.  (remote_wait):  Change 'T' message parser to deal with new
+	improved format which allows stub to send an arbitrary bunch of
+	registers.
+	* sparc-stub.c:  General cleanups.  (trap_low, handle_exception):
+	make all this re-entrant by storing all state on the stack.  Clean
+	up memory error trapping.  (computeSignal, set_debug_traps):
+	make it all table driven.  Make a start at a baud rate setting command.
+
+Wed Aug 19 10:23:27 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* m68k-pinsn.c: handle new operand type 'r', introduced for cas2.
+
+	* remote-vx.c: redefine malloc to avoid buggy declaration on
+	RS/6000 <rpc/types.h>.
+	xm-rs6000.h: include <sys/select.h> to define fd_set for
+	<rpc/svc.h> on RS/6000.
+
+Tue Aug 18 14:48:24 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+ 	* Makefile.in: added FLAGS_TO_PASS variable, and passed it to
+	recursive invocations of make.  Always create installation
+	directories.
+
+Mon Aug 17 18:29:58 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* m68k-pinsn.c:  Minor fix in style of output (don't use
+	range to indicate floating point control registers).
+
+Sat Aug 15 02:58:03 1992  John Gilmore  (gnu@cygnus.com)
+
+	* m68k-pinsn.c:  Surround extended support with #ifdef HAVE_68881.
+
+	* infcmd.c (registers_info):  Handle multiple register names.
+	Changes inspired by Roland McGrath.
+
+Sat Aug 15 02:28:52 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c:  New file.  Mix it with your SPARClite
+	application, and it will speak GDB remote protocol!
+	* remote.c (remote_wait):  Change 'T' (expedited reply) message to
+	deal with arbitrary registers.  Needed for sparc-stub.
+
+Fri Aug 14 12:11:25 1992  Fred Fish  (fnf@cygnus.com)
+
+	* cplus-dem.c (cplus_markers):  Add table for gnu style and
+	use throughout, in place of compile time constant CPLUS_MARKER.
+	* cplus-dem.c (ARM_VTABLE_STRING, ARM_VTABLE_STRLEN):  Add.
+	* cplus-dem.c (cfront_special):  New function, as suggested
+	by pfieland@stratus.com.
+	* cplus-dem.c (forget_types):  New function.
+	* cplus-dem.c (cplus_demangle):  Call gnu_special, moved from
+	demangle_prefix().
+	* cplus-dem.c (mop_up):  Call forget_types().
+	* cplus-dem.c (AUTO_DEMANGLING, GNU_DEMANGLING, LUCID_DEMANGLING):
+	Use throughout, instead of checking current_demangling_style.
+	* cplus-dem.c (demangle_signature):  When finding an explicit
+	start of function args, forget all remembered types for
+	lucid/cfront style demangling.
+	* cplus-dem.c (demangle_prefix):  In a sequence of two or more
+	underbar characters, use last pair as the delimiter.  Hoist
+	gnu_special() call up to cplus_demangle().  Call cfront_special()
+	when appropriate.
+	* cplus-dem.c (cplus_special):  Fix virtual table name demangling
+	for inherited classes.	
+	* cplus-dem.c (demangle_args):  Document quirks of numbered
+	references to previously seen types.
+	* dbxread.c (read_ofile_symtab, process_one_symbol):
+	Use AUTO_DEMANGLING rather than explicitly checking
+	current_demangling_style.
+	* demangle.h:  Add some comments.
+	* demangle.h (AUTO_DEMANGLING, GNU_DEMANGLING, LUCID_DEMANGLING,
+	CFRONT_DEMANGLING):  New macros.
+	* dwarfread.c (LCC_PRODUCER):  Remove trailing space, which is
+	not found in the actual producer string produced by lcc.
+	* dwarfread.c (handle_producer):  Use AUTO_DEMANGLING rather
+	than explicitly checking current_demangling_style.
+
+Thu Aug 13 11:54:46 1992  John Gilmore  (gnu at cygnus.com)
+
+	* breakpoint.c (enable_longjmp_breakpoint,
+	disable_longjmp_breakpoint, set_longjmp_resume_breakpoint):
+	Check for duplicate breakpoints at the same address.  Bug report
+	and preliminary fix from Dave Morrison, <drmorris@us.oracle.com>.
+
+Wed Aug 12 11:14:58 1992  Fred Fish  (fnf@cygnus.com)
+
+	* buildsym.c (end_symtab):  Document that end_symtab can return
+	NULL under non-error conditions.
+	* dwarfread.c (read_file_scope):  Guard against dereferencing NULL
+	returned from end_symtab for empty compilation units.
+
+Tue Aug 11 02:49:39 1992  John Gilmore  (gnu at cygnus.com)
+
+	* am29k-tdep.c:  Lint from DECstation compiler.
+	* mem-break.c:  Restore test of BREAKPOINT size that Fred removed.
+	As the man page says, "Sometimes you just can't get lint to shut
+	up".  That doesn't mean you should blow away the code it won't
+	shut up about.
+	* mips-xdep.c:  Revise stubbing-out of code until Rich cleans
+	it up over the next few weeks.  Make mips x 29k build.
+	* tm-29k.h (CALL_DUMMY):  Make it work on cross-endian hosts.
+	(FIX_CALL_DUMMY):  Comment in the patching of the breakpoint,
+	but leave it as a comment because the breakpoint instruction 
+	is not easily accessible at this moment (it's static, and if
+	we define one here, it goes into every file compiled).
+
+Mon Aug 10 22:27:19 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.6.3.
+	* dwarfread.c (scan_partial_symbols):  Skip over DIE's within
+	function scopes when building partial symbol tables.
+	* objfiles.c (open_existing_mapped_file):  Make it clear in
+	warning message that out of date mapped files are ignored.
+	* symtab.c (lookup_symtab_1, lookup_symbol):  Print compilation
+	unit source file name in error message.
+
+Sat Aug  8 23:12:22 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (struct dieinfo):  Add has_at_byte_size.
+	* dwarfread.c (struct_type):  In absence of AT_byte_size for
+	bitfield, use size of object of member's type for the size of
+	the anonymous object containing the bit field.
+	* dwarfread.c (completedieinfo):  Set has_at_byte_size when
+	an AT_byte_size attribute is seen.
+	* mipsread.c (psymtab_to_symtab_1):  Fix misspelled cast to
+	union aux_ext (was aux_ent).
+	* i386-pinsn.c (print_insn):  Cast 2'nd arg to read_memory from
+	unsigned char* to char*, for Lucid compiler.
+	* i386-tdep.c (codestream_fill):  Fix cast of 2'nd arg to read_memory
+	to be correct type (from unsigned char* to char*).
+	* valprint.c (type_print_derivation_info):  Minor tweak to placement
+	of commas in derived class printing.
+	* xcoffread.c (builtin_type):  Fix misspelling in fatal message.
+
+Fri Aug  7 11:18:23 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* xm-go32.h: Define LSEEK_NOT_LINEAR
+	* source.c (find_source_lines): if LSEEK_NOT_LINEAR is defined
+	then work out the lseek positions of newlines by running through
+	the file and `tell'ing.  This makes source file listing work on
+	OS's where the relationship between physical position in file and
+	canonical position is indeterminate, eg VMS and DOS.
+
+Thu Aug  6 10:56:01 1992  Fred Fish  (fnf@cygnus.com)
+
+	* stabsread.c:  Ensure that all members of all allocated structures
+	are initialized to known state to avoid hard to find bugs with gdb
+	using fields containing random data.
+	* buildsym.c (start_subfile):  Compact dirname initialization.
+	* buildsym.c (patch_subfile_names):  New function.
+	* buildsym.c (end_symtab):  Make copy of dirname on symbol obstack.
+	* buildsym.c (end_symtab):  Free all malloc'd subfile fields.
+	* buildsym.h (patch_subfile_names):  Add prototype.
+	* dbxread.c (process_one_symbol):  Call patch_subfile_names.
+
+Wed Aug  5 01:42:40 1992  John Gilmore  (gnu at cygnus.com)
+
+	* remote-udi.c:  Update comments.
+
+	* remote.c (getpkt):  Only force retransmission ten times;
+	after that, assume bug in target code, and handle pkt anyway.
+
+Mon Aug  3 17:06:20 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in:  Add support for apollo 68k under BSD environment.
+	* xm-apollo68b.h:  New file to support above.
+
+Mon Aug  3 00:25:56 1992  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in:  Recognize i486 host cpu.
+	* valprint.c (type_print_derivation_info):  Print derivation info
+	in same form as class declarations in source.
+	* valprint.c (type_print_varspec_suffix):  Split arg printing
+	code out to type_print_args function.
+	
+Sat Aug  1 13:32:58 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (struct dieinfo):  Remove obsolete at_visibility, 
+	at_import, at_frame_base.
+	* dwarfread.c (completedieinfo):  Remove cases for obsolete
+	AT_visibility, AT_import, and AT_frame_base attributes.
+	* breakpoint.h (BREAKPOINT_MAX):  Increase from 10 to 16 for
+	i860, which can keep up to 4 shadow breakpoints.
+	* tm-stratus.h (USG):  Define.
+	* tm-stratus.h (TARGET_BYTE_ORDER):  Define to BIG_ENDIAN.
+	* xm-stratus.h (HOST_BYTE_ORDER):  Define to BIG_ENDIAN.
+	* xm-stratus.h (xm-sysv4.h):  Include, name changed from xm-svr4.h.
+	* xm-stratus.h (NO_JOB_CONTROL):  Remove define.
+	* config/stratus.mt (TDEPFILES):  Include files available from
+	stratus that are not yet in release pending receipt of paperwork
+	at FSF.
+	* buildsym.c (finish_block):  Minor code format change.
+	* gdbtypes.h (struct field):  Add to comments.
+	* gdbtypes.h (virtual_field_bits):  Add to comments.
+	* objfiles.c (allocate_objfile):  Change obstack interface to
+	match FSF merging efforts.
+
+Mon Jul 27 21:14:44 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.6.2.
+	* Makefile.in (SFILES_MAINDIR):  Add stabsread.c
+	* Makefile.in (OBS):  Add stabsread.o
+	* Makefile.in (stabsread.o):  Add build rule.
+	* stabsread.c, stabsread.h:  New files.
+	* buildsym.c:  Split out stabs specific support to stabsread.c.
+	* buildsym.h:  Split out stabs specific support to stabsread.h.
+	* dbxread.c (stabsread.h):  Include
+	* dbxread.c (dbx_new_init):  Call stabsread_new_init.
+	* dbxread.c (dbx_psymtab_to_symtab_1):  Call stabsread_init.
+	* dbxread.c (read_ofile_symtab):  Call end_stabs.
+	* dbxread.c (process_one_symbol):  Call end_stabs and start_stabs.
+	* dbxread.c (elfstab_build_psymtabs):  Call stabsread_new_init.
+	* dwarfread.c (psymtab_to_symtab_1):  Call buildsym_init, add
+	really_free_pendings to cleanups.
+	* elfread.c (elf_new_init):  Call stabsread_new_init.
+	* gdbtypes.c:  Small changes to maintenance commands.
+	* mipsread.c (stabsread.h):  Include.
+	* mipsread.c (psymtab_to_symtab_1):  Call end_stabs.
+	* xcoffread.c (stabsread.h):  Include.
+	* xcoffread.c (global_stabs):  Remove redundant def.
+	* xcoffread.c (read_xcoff_symtab):  Call start_stabs and end_stabs.
+
+Wed Jul 22 21:39:33 1992  Fred Fish  (fnf@cygnus.com)
+
+	* lmode_inferior_valid, lmode_ours_valid:  New static vars.
+	* inflow.c (terminal_init_inferior, terminal_inferior,
+	terminal_ours_1, initialize_inflow):  Record and use state
+	of lmode_inferior_valid and lmode_ours_valid.
+
+Wed Jul 22 04:23:03 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)
+
+	* es1800.c: use FREAD|FWRITE rather than _FREAD|_FWRITE.
+	include <sgtty.h> on USG.  (from sef).
+
+	* depend: es1800 dependency needed here.
+
+Mon Jul 20 21:09:53 1992  Fred Fish  (fnf@cygnus.com)
+
+	* buildsym.c (read_struct_type):  Initialize structs allocated
+	with alloca, to avoid using random values from stack later on.
+	* defs.h (fprintf_filtered):  Add prototype.
+	* gdbtypes.c (check_stub_method):  Fix misleading comments.
+	* gdbtypes.c (print_arg_types, dump_fn_fieldlists):  New maint
+	support functions.
+	* gdbtypes.c (print_cplus_stuff, recursive_dump_type):  Many
+	small changes to maint support functions.
+	* gdbtypes.h (cplus_struct_type):  Reorganize member ordering
+	for some fields and expand comments.
+	* objfiles.c (allocate_objfile):  Use new obstack_alloc_arg
+	macro and track change to obstack_full_begin macro.
+	* utils.c (fprintfi_filtered):  New function.
+	* valprint.c (type_print_base):  Fixup field printing to not
+	print extraneous lines and not print bogus "no data fields"
+	messages for C++ classes with no data members.  Also use new
+	fprintfi_filtered function.
+
+Mon Jul 20 11:25:18 1992  D. V. Henkel-Wallace  (gumby@cygnus.com)
+
+	* configure.in: es1800 ok for 68000 too.
+
+Sat Jul 18 15:48:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* configure.in: echo error messages to stderr, not stdout
+
+Fri Jul 17 17:07:24 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* configure.in: recognize hppa* instead of hppa
+
+Fri Jul 17 16:52:04 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* energize.c:  Second cut at DynamicLoad message handling.
+
+	* energize.c:  Relativize pathnames in #include statements.
+	* (kernel_dispatch):  Better error messages for unknown protocol
+	messages.
+	* (kernel_dispatch):  First cut at DynamicLoad message handling.
+
+	* Makefile.in:  Remove -I../readline from all compilations,
+	include a special case for main.o instead.
+
+Fri Jul 17 10:14:56 1992  Fred Fish  (fnf@cygnus.com)
+
+	* eval.c (evaluate_subexp):  Ask lookup_struct_elt_type to call
+	error if it fails to find a member type, rather than return NULL
+	and trigger a coredump.
+	* symtab.c (lookup_symbol, lookup_demangled_block_symbol,
+	lookup_demangled_partial_symbol,):  Ask demangle_and_match to
+	match on complete demanglings, including argument lists for member
+	functions, rather than just accepting the first demangling that
+	matches the class and function name.
+	* dwarfread.c (read_file_scope):  Pass contents of AT_comp_dir
+	to start_symtab as the directory name.
+	* dwarfread.c (completedieinfo):  Strip off any leading hostname
+	portion of the AT_comp_dir attribute string.  Gdb doesn't know
+	what to do with them (FIXME).
+
+Thu Jul 16 13:37:09 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* breakpoint.c (commands_command):  Simplify code a bit, remove
+	unnecessary fflush().
+
+	* Makefile.in (OTHERS):  Add gcc.patch.
+	* partial-stab.h (N_SO):  Fix handling of redundant SOs (again...)
+
+Thu Jul 16 12:07:40 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (LCC_PRODUCER):  Change to match current NCR
+	lcc producer string.
+
+Thu Jul 16 11:40:55 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* WHATS.NEW renamed to NEWS.
+
+Wed Jul 15 11:37:31 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dbxread.c, dwarfread.c:  Re-enable experimental code to
+	automatically select demangling style.
+	* demangle.c (DEFAULT_DEMANGLING_STYLE):  Rename from simply
+	DEMANGLING_STYLE, to make more descriptive.  Revert back to
+	"auto" as default.  Comment use.
+	* Makefile.in (DEMANGLING_STYLE, DEMANGLE_OPTS):  Remove.
+	* Makefile.in (${DEMANGLER}.o) Remove target and special
+	compilation rule.
+
+Tue Jul 14 23:05:14 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.6.1 (post-release versions).
+
+Tue Jul 14 19:26:54 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in, demangle.c:  Change default demangling style to
+	gnu.
+	* Makefile.in:  Update version to 4.6 !!!
+	* README, WHATS.NEW:  Update for 4.6.
+
+Tue Jul 14 16:59:46 1992  Ken Raeburn  (raeburn@cygnus.com)
+
+	* i960-tdep.c (frame_args_address): If arg pointer can't be found,
+	use frame address.
+
+	* buildsym.c (read_struct_type): Don't die on TYPE_CODE_UNDEF
+	nodes as base classes.
+
+Tue Jul 14 00:12:30 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* alldeps.mak, depend:  Update.
+
+	* xcoffread.c:  Add decl for section_offset to keep prototype happy.
+
+	* Makefile.in (VERSION):  4.5.9.
+
+	* xm-hp300bsd.h:  Add decl for strdup().
+	* mips-tdep.c (heuristic_proc_desc):  Fill in proc start addr in
+	PDR.  Cleanup a few things, fix compilation warnings.
+
+Mon Jul 13 19:06:54 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (DEMANGLING_STYLE):  New define to set default
+	demangling style for C++.  Defaults to "auto".
+	* Makefile.in (DEMANGLE_OPTS):  Use DEMANGLING_STYLE.
+	* Makefile.in (SFILES_MAINDIR):  Add demangle.c
+	* Makefile.in (OBS):  Add demangle.o
+	* cplus-dem.c (GNU_DEMANGLING, ARM_DEMANGLING, LUCID_DEMANGLING):
+	Remove compile time decisions about demangling style and replace
+	with runtime decisions using current_demangling_style.
+	* cplus-dem.c (main):  Expand code included during building of
+	standalone demangler to recognize demangling style options.
+	* dbxread.c (demangle.h):  Include.
+	* dbxread.c (read_ofile_symtab, process_one_symbol):  Set GNU C++
+	demangling style if processing g++ code and current demangling style
+	is auto (Note: this feature currently disabled.)
+	* demangle.c:  New file, generic demangling control.
+	* demangle.h (demangling_styles):  New enumeration to select one
+	of several demangling styles.  Also define string names for each
+	style.
+	* demangle.h (set_demangling_style):  Add prototype.
+	* dwarfread.c (demangle.h):  Include.
+	* dwarfread.c (GPLUS_PRODUCER, LCC_PRODUCER, CFRONT_PRODUCER):
+	New producer string prefixes to recognize.
+	* dwarfread.c (handle_producer):  Consolidate actions for specific
+	producers.  Set demangling style based on producer string if
+	current style is auto.  (Note: this feature currently disabled.)
+	* config/ncr3000.mt (DEMANGLE_OPTS):  Remove.
+
+Sat Jul 11 18:23:58 1992  John Gilmore  (gnu at cygnus.com)
+
+	* config/sun4sol2.mh:  Remove -xs flag, default INSTALL to cp.
+
+Fri Jul 10 13:58:34 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* gdbtypes.c, gdbtypes.h:  New function lookup_signed_typename.
+	* c-exp.y:  Call lookup_signed_typename() after seeing
+	"signed".  This handles "signed char" correctly.
+	* c-exp.y:  Recognize (but ignore) 'const' and 'volatile'
+	keywords before a type specifier.
+
+Fri Jul 10 10:19:52 1992  Fred Fish  (fnf@cygnus.com)
+
+	* command.c (lookup_cmd_1):  Clarify descriptive comments.
+	* gdbcmd.h (maintenanceprintlist):  Add declaration.
+	* main.c (maintenanceprintlist):  Add definition.
+	* main.c (gdb_completer_command_word_break_characters):  Add.
+	* main.c (symbol_completion_function):  Switch completer word
+	break character sets dynamically, based on whether completion is
+	being done on commands or on something else.
+	* main.c (initialize_cmd_lists):  Init maintenanceprintlist.
+	* maint.c:  Include demangle.h.
+	* maint.c (maintenance_demangle):  New function.
+	* maint.c (maintenance_print_command):  New function.
+	* maint.c (_initialize_maint_cmds):  Reorganize some commands
+	under new maintenance print subcommand.
+
+Thu Jul  9 19:05:27 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* gdbtypes.c (lookup_struct_elt_type):  If the input type is
+	TYPE_CODE_PTR or TYPE_CODE_REF, dereference it to get the
+	target type.  Otherwise, 'whatis this.field' wouldn't work,
+	which would be inconsistent, since 'print this.field' works.
+	* buildsym.c (read_struct_type, read_enum_type):  Clear
+	TYPE_FLAG_STUB flag.
+	* buildsym.c (cleanup_undefined_types):  Don't rely on a
+	flawed "Reasonable test to see if" a type has been defined
+	since it was referred to; now we can just see if the
+	TYPE_FLAG_STUB flag has been cleared.
+	* valprint.c (print_type_base):  Emit public/protected/private
+	labels for methods as well as fields.  Also, indent these labels
+	2 spaces instead of 4, for a more conventional "look".
+	* symtab.c (gdb_mangle_name):  Undo Fred's change, unless
+	GCC_MANGLE_BUG is defined.  Also, handle destructors specially.
+	* gcc.patch:  New file.  Contains patch for gcc (so people
+	with gdb-2.2.x won't have to wait for a new gcc release).
+
+Thu Jul  9 18:44:26 1992  Ken Raeburn  (raeburn@cygnus.com)
+
+	* i960-pinsn.c (mem): Variables reg[123] should point to CONST.
+	(print_addr): Call print_address to show symbolic version as well.
+
+	* remote-vx.c (vx_kill): Don't look for arguments; they aren't
+	being passed.
+	(vx_read_register): Declare inferior_fp_regs.  Delete code for
+	copying "inferior_registers" around; the values are already in var
+	"registers".  Use correct size for register set.
+
+	* remote-vx.c (vx_write_register): Don't try writing FP regs; the
+	target doesn't support it.
+	(vx_read_register): Don't try reading them either.
+
+	* tm-i960.h (IP_REGNUM): Move to end of non-FP list, since the
+	VxWorks back end reads them in one contiguous set except for this
+	one.
+	(register_names): Change "pc" to "pcw" to avoid confusion printing
+	"$pc".
+	* tm-vx960.h (PC_REGNUM): Use RIP_REGNUM, since that's where we
+	find the PC under VxWorks.
+
+Wed Jul  8 21:34:30 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (alloc_utype, decode_subscr_data):  Call alloc_type
+	to create new blank types, instead of handcrafting them.
+	* defs.h (printfi_filtered):  Add prototype.
+	* utils.c (printfi_filtered):  New function.
+	* gdbtypes.c (recursive_dump_type):  Use printfi_filtered to
+	to simplify the code.  Other cleanups.
+	* gdbtypes.c (check_stub_method):  Demangle using DMGL_ANSI.
+	* gdbtypes.h (struct cplus_struct_type):  Add comments describing
+	use of various fields.
+	* gdbtypes.c (print_bit_vector, print_cplus_stuff):  New functions.
+	* c-exp.y (%token):  Add CLASS as a token for C++, add grammar
+	production that currently treats it exactly the same as STRUCT.
+	* c-exp.y (yylex):  Recognize "class" as token CLASS.
+	* symtab.c (gdb_mangle_name):  Rewrite to match current g++ stabs.
+	* symtab.c (decode_line_1):  Fix to pass quoted args on down to
+	general symbol handling code.  Call cplus_mangle_opname with
+	DMGL_ANSI.
+	* symtab.c (decode_line_2):  Print demangled function names in
+	breakpoint menus, instead of just file and line number.
+	* symtab.c (name_match):  Call cplus_demangle with DMGL_ANSI.
+	* valprint.c (type_print_base):  Print "class" for C++ classes,
+	rather than "struct".  Print section labels for public, protected
+	and private members of C++ classes.	
+	* values.c:  Include demangle.h.
+	* values.c (value_headof):  Call cplus_demangle with DMGL_ANSI.
+
+Wed Jul  8 17:23:07 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (VERSION):  Update to 4.5.8.
+
+ Wed Jul  8 00:11:02 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (dbx_symfile_init):  Init stab_section_info to NULL to
+	prevent crashes when examining cross-targets.
+	* dbxread.c (process_one_symbol):  Include directory name when
+	calling start_subfile for SOL & BINCL symbols.  This allows gdb to
+	find include files, and yacc/lex sources when the cwd doesn't match
+	that in which the object was compiled.
+	* objfiles.h (ALL_MSYMBOLS):  Don't seg fault when there are no
+	msymbols.
+	* symtab.c (lookup_symtab_1):  Rewrite.  It now handles include
+	files.
+
+Tue Jul  7 09:00:42 1992  Fred Fish  (fnf@cygnus.com)
+
+	* maint.c (maintenance_command, maintenance_info_command):
+	Install with allow_unknown as 0 and call help_list to show
+	list of possibilities when no subcommand is specified.
+
+Tue Jul  7 00:20:29 1992  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in:  Add m68k-ericsson-*.
+	* remote-es1800.c, tm-es1800.h, config/es1800.mt:  New files.
+
+Sun Jul  5 17:17:16 1992  Fred Fish  (fnf@cygnus.com)
+
+	* maint.c:  New file.
+	* Makefile.in (SFILES_MAINDIR):  Add new file maint.c.
+	* Makefile.in (OBS):  Add new file maint.o.
+	* defs.h (command_class):  Add class_maintenance.
+	* defs.h (MAINTENANCE_CMDS):  Default to including maintenance
+	commands.  Allow for them (and other nonessential parts of gdb)
+	to be selectively left out under special circumstances.
+	* gdbtypes.c (recursive_dump_type):  New function; supports
+	maintenance print-type command.
+	* gdbtypes.h (recursive_dump_type, maintenance_print_type):
+	Add prototypes.
+	* main.c (maintenancelist, maintenanceinfolist):  Add maintenance
+	command lists.
+	* main.c (initialize_cmd_lists):  Eliminate unnecessary casts on
+	initializers.  Add initializations for setprintlist, showprintlist,
+	setchecklist, showchecklist, maintenancelist, and maintenanceinfolist.
+	* printcmd.c (maintenance_print_type):  New maintenance cmd.
+	* valprint.c (setprintlist, showprintlist):  Move to main.c, as
+	implied by comment that all cmd lists are owned by main.c.
+	* infcmd.c (unsetlist):  Move to main.c, as implied by comment
+	that all cmd lists are owned by main.c.
+	* language.c (setchecklist, showchecklist):  Move to main.c, as
+	implied by comment that all cmd lists are owned by main.c
+	* breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist,
+	deletelist):  Remove redundant declarations (also in gdbcmd.h).
+	* symmisc.c (printsyms_command):  Now maintenance_print_symbols.
+	* symmisc.c (printmsyms_command):  Now maintenance_print_msymbols.
+	* symmisc.c (printpsyms_command):  Now maintenance_print_psymbols.
+	* symmisc.c (printobjfiles_command):  Now maintenance_print_objfiles.
+	* symtab.h (maintenance_print_symbols, maintenance_print_psymbols,
+	maintenance_print_msymbols, maintenance_print_objfiles):
+	Add prototypes.
+	* symmisc.c (printsyms_command, printpsyms_command,
+	printmsyms_command, printobjfiles_command):  Removed from
+	_initialize_symmisc.
+	* main.c (dump_me_command):  Moved to maint.c and renamed to
+	maintenance_dump_me.
+	* breakpoint.c (all_breakpoints_info):  Rename to
+	maintenance_info_breakpoints.
+	* breakpoint.c (_initialize_breakpoint):  Convert add_info of
+	all_breakpoints_info to add maintenance_info_breakpoints to the
+	maintenanceinfolist instead.
+	main.c (initialize_main):  Set up maintenance class commands.
+
+Sun Jul  5 11:03:53 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* energize-patches:  Fix minor problems with building energize lib.
+
+	* energize-patches:  Change names of all cadillac procedure calls
+	to be energize procedure calls.  Simplify many hooks by moving
+	tests energize.c.  Configure energize, and build it automatically now.
+
+Sun Jul  5 09:43:28 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.5.7.
+	* cplus-dem.c (demangle_args):  Validate index for previously
+	seen type to guard against bogus values from malformed manglings.
+	* valops.c (value_struct_elt_for_reference):  Guard against
+	blindly using NULL return value from lookup_symbol.
+
+Sun Jul  5 09:46:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* cadillac.c, cadillac-patches:  Rename to energize.c and
+	energize-patches.  Change all routines and variables named
+	'cadillac*' to 'energize*'.  Create new file called energize.h to
+	hold all interface declarations.
+
+	* deblib/connection/*:  Move all of this stuff into energize/, but
+	delete unneeded files.
+
+Sun Jul  5 03:06:39 1992  John Gilmore  (gnu at cygnus.com)
+
+	* tm-sysv4.h (NAMES_HAVE_UNDERSCORE):  SVR4 systems don't.
+
+	* buildsym.c (finish_block):  Fix thinko `inner block' complaints.
+	* dbxread.c (process_one_symbol):  Parse N_OPT "gcc2_compiled.".
+	* procfs.c (proc_set_exec_trap): Set run-on-last-close flag on
+	child processes, to avoid dead ones "hanging around" after GDB exits.
+	(attach): Always stop the process if it needs it.  Set RLC flag
+	when attaching running processes, so it will continue if we detach
+	it, quit, or are killed.
+	(detach):  Clear faults and set RLC flag to make process run
+	when we close it.
+	(open_proc_file):  New `mode' argument for O_RDONLY or O_RDWR.
+	Callers changed.
+	(info_proc):  Open process O_RDONLY, so we can see any process,
+	even those controlled by debuggers.
+	* tm-sun4sol2.h (SUN_FIXED_LBRAC_BUG):  They did (in Sol 2).
+
+Sat Jul  4 03:43:38 1992  John Gilmore  (gnu at cygnus.com)
+
+	Relocate symbols using an array of section_offsets, rather than a
+	single `addr' or `offset'.  This makes Solaris-2 support work, and
+	permits better VxWorks (and maybe xcoff) support later.
+
+	* symtab.h (struct section_offsets):  New structure for keeping
+	a set of offsets, rather than a single one.
+	(struct objfile):  Replace addr with section_offsets member.
+	* symfile.h:  Add sym_offsets to struct sym_fns.  Conforming changes.
+	* gdb-stabs.h:  New include file with `symbol type specific'
+	parameters for psymtabs and objfiles.
+	* Makefile.in (HFILES):  Add gdb-stabs.h.
+	* buildsym.h (start_psymtab, process_one_symbol):  Fix prototypes.
+	* coffread.c:  Conforming changes.  Fake offset array always 0.
+	* dbxread.c:  Conforming changes.
+	(struct dbx_symfile_info):  Move to gdb-stabs.h.
+	(start_psymtab):  Call elfstab_offset_sections to calculate good
+	offsets for this source file, based on the ELF symbol table info.
+	(read_ofile_symtab):  Yank N_CATCH, which is dead.
+	(process_one_symbol, N_CATCH):  Yank.
+	(", N_FUN, N_FNAME, N_FN, N_FN_SEQ, N_SO, N_SOL, N_ENTRY):
+	Relocate with SECT_OFF_TEXT.
+	(", N_STSYM, N_LCSYM, N_ROSYM):  Grope around in the stab string
+	to distinguish relocatable from absolute symbols.  Then, if not
+	absolute, do:
+	(", N_STSYM, N_DSLINE):  SECT_OFF_DATA.
+	(", N_LCSYM, N_BSLINE):  SECT_OFF_BSS.
+	(", N_ROSYM):  SECT_OFF_RODATA.
+	(elfstab_build_psymtabs):  Caller has allocated dbx_symfile_info.
+	(dbx_symfile_offsets):  Add to translate addr to offset.
+	* dwarfread.c:  Conforming changes.  Single offset currently used.
+	* elfread.c:  Add various complaints about elf/stab stuff.
+	#include gdb-stabs.h.  Conforming changes, using a single offset.
+	(elf_symtab_read):  Record info from BSF_FILE symbols, and local
+	variables called "Bbss.bss", "Ddata.data", and "Drodata.rodata",
+	for later use in building psymtabs.
+	(elf_symfile_read):  Allocate dbx_symfile_info here, to keep
+	the info collected in elf_symtab_read.  Cleanup calls free_elfinfo.
+	(free_elfinfo):  New fn, frees all chained stab_section_infos
+	in an objfile, and zaps the start-of-chain pointer.
+	(elfstab_offset_sections):  New fn, looks in stab_section_info
+	chain to determine section bases to relocate a psymtab's worth
+	of symbols, as they are being read.
+	* mipsread.c:  Conforming changes.  Stabs-reading will relocate
+	using one offset.  MIPS-reading will not relocate at all.
+	* partial-stab.h:  Relocate different symbol types using different
+	offsets from section_offsets.
+	* symfile.c:  Conforming changes.
+	(find_lowest_section):  Unused function to use later
+	to free us from the Tyranny of the Text Section.
+	(syms_from_objfile):  Translate absolute arg ADDR to offsets used
+	in all lower layers of symbol reading.  Call format-specific
+	sym_offsets function to initialize offsets for high speed symbol
+	reading.
+	(symbol_file_add):  Call reinit_frame_cache so callers don't have to.
+	(symbol_file_command, add_symbol_file_command):  Callers changed.
+	* symmisc.c (dump_psymtab):  Print new relocation parameters.
+	* xcoffread.c:  Corresponding changes.
+
+	* buildsym.c:  Tidy innerblock_complaint and blockvector_complaint.
+	* main.c (main):  Read the $HOME/.gdbinit file before processing
+	the argv arguments (e.g. reading symbol files or core
+	files).  This allows global parameters to be set, which will apply
+	during the symbol reading.  The ./.gdbinit is still read after
+	argv processing.
+	* symtab.c (list_symbols):  `i variables' shouldn't show enum values.
+	* xcoffexec.c:  Clean up quote inside comment.
+
+Fri Jul  3 20:18:26 1992  Fred Fish  (fnf@cygnus.com)
+
+	* breakpoint.c, buildsym.c, c-exp.y, coffread.c, command.c,
+	core.c, cplus-dem.c, dbxread.c, dwarfread.c, elfread.c, environ.c,
+	eval.c, findvar.c, gdbtypes.c, hppabsd-tdep.c, hppahpux-tdep.c,
+	i386-tdep.c, ieee-float.c, infcmd.c, inflow.c, infptrace.c,
+	infrun.c, m2-exp.y, mipsread.c, objfiles.c, parse.c, procfs.c,
+	putenv.c, remote-mm.c, remote-vx.c, solib.c, sparc-tdep.c,
+	sparc-xdep.c, stack.c, symfile.c, symtab.c, symtab.h, target.c,
+	tm-i386v.h, tm-sparc.h, utils.c, valarith.c, valops.c, valprint.c,
+	values.c, xcoffread.c:
+	Remove "(void)" casts from function calls where the return value
+	is ignored, in accordance with GNU coding standards.
+
+Fri Jul  3 00:00:49 1992  John Gilmore  (gnu at cygnus.com)
+
+	* dbxread.c (process_one_symbol):  Ignore N_MAIN, N_ENDM for Solaris.
+	* partial-stab.h:  Ignore N_ENDM.
+	* elfread.c (elf_symtab_read):  Ignore symbols that don't have a
+	CODE or DATA section attachment.  This eliminates a lot of random
+	values from shared libraries, which screw up the ordinary symbols
+	in the address ranges they happen to overlap.
+	* buildsym.c (define_symbol):  Eliminate special tests
+	for function types; move into "function" cases in switch statement.
+	(define_symbol: 'f', 'F', 'P'):  Process all parameter types
+	in case they define new type numbers.  But ignore them (FIXME).
+	('k', 'B'):  Ignore const and volatile if we see them (FIXME).
+	(read_sun_builtin_type):  Add commentary.
+
+Wed Jul  1 00:47:02 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* xm-rs6000.h: define MEM_FNS_DECLARED
+
+Tue Jun 30 02:25:10 1992  John Gilmore  (gnu at cygnus.com)
+
+	* tm-mips.h (GDB_TARGET_IS_MIPS):  Define for mips-xdep.c.
+	(READ_MIPS_FORMAT, COFF_FORMAT):  Remove, unused now.
+	* mips-xdep.c:  Remove most include files (unused, caused errs).
+	(fetch_core_registers):  Use right parameters in dummy fn.
+
+Mon Jun 29 18:30:57 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (scan_file_globals):  Beware the null file.
+	Fix from Jim Williams.
+
+	* stack.c (return_command):  Evaluate expression *before* popping
+	off the stack frames!  Fix inspired by Jim Williams.
+	(up_silently_command, down_silently_command):  No sel frame is error.
+
+	* defs.h (memcpy, memset):  Conditionalize decls on
+	#ifndef MEM_FNS_DECLARED, since DECstation differs.
+	(alloca):  Break out the STDC and non-STDC alloca cases, to make
+	it work on old preprocessors as well as "picky ANSI" ones.
+	* xm-mips.h (memcpy, memset):  Declare, and set MEM_FNS_DECLARED.
+
+	* mips-tdep.c (heuristic_proc_start):  Zero arg produces zero.
+	* utils.c (fputs_demangled):  Rename SLOP since DECstation system
+	header files define it!
+
+	* tm-29k.h (BREAKPOINT):  Allow it to be overridden with -D.
+
+Mon Jun 29 16:30:25 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dbxread.c, i386-pinsn.c, i386-tdep.c, regex.c, solib.c, symmisc.c,
+	symtab.h, tm-i386v4.h, valprint.c, values.c:  Lint.
+	* breakpoint.c, c-exp.y, coffread.c, command.c, environ.c, eval.c,
+	findvar.c, infcmd.c, infptrace.c, infrun.c, m2-exp.y, parse.c,
+	putenv.c, solib.c, sparc-xdep.c, symtab.c, tm-i386v.h, tm-sparc.h,
+	utils.c, valarith.c, valops.c, valprint.c, values.c:
+	Replace bcopy() use with memcpy(), which is more standard and can
+	take advantage of gcc's builtin functions for increased performance.
+	* breakpoint.c, buildsym.c, coffread.c, dbxread.c, i386-tdep.c,
+	ieee-float.c, infcmd.c, sparc-tdep.c, stack.c, symtab.c, symtab.h,
+	target.c, values.c:
+	Replace bzero() use with memset(), which is more standard and can
+	take advantage of gcc's builtin functions for increased performance.
+	* i386-tdep.c, main.c, valprint.c:
+	Replace bcmp() use with memcmp(), which is more standard and can
+	take advantage of gcc's builtin functions for increased performance.
+
+Sun Jun 28 13:30:22 1992  Fred Fish  (fnf@cygnus.com)
+
+	* remote.c (remote_wait):  Fix cast on signal() call.
+	* defs.h (alloca):  More diddling with alloca.  Have to ensure
+	that it has a prototype, so that if alloca is defined as a macro
+	that takes an arg, the definition is seen as a use of a macro
+	that takes an arg, to satisfy picky ANSI preprocessors.
+
+Sat Jun 27 12:12:20 1992  Fred Fish  (fnf@cygnus.com)
+
+	* sparc-pinsn.c:  Use <string.h> rather than "string.h", for
+	consistency with all other gdb files.
+	* cadillac.c:  Use <string.h> rather than <strings.h>.
+	* cadillac.c (kernel_dispatch):  Convert rindex usage to strrchr.
+	* Makefile.in (MAKE):  Remove definition for consistency with
+	other Makefile.in files and to fix problem with recursive makes.
+
+Fri Jun 26 19:03:23 1992  John Gilmore  (gnu at cygnus.com)
+
+	* hppahpux-xdep.c (child_xfer_memory):  Avoid PT_WDUSER because it
+	crashes H-PUX.
+
+Fri Jun 26 11:09:10 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* source.c (print_source_lines): for DOS interoperability; don't
+	print CR (013) as ^M.
+
+Thu Jun 25 15:18:42 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (dbx_symfile_init):  Move more code under hp9000s800
+	conditional.
+	* hppabsd-core.c:  Don't include "param.h", include <sys/param.h>
+	instead.
+	* remote.c (remote_wait):  Cast signal to void * to avoid warning
+	from busted HP compiler.
+
+	* partial-stab.h (N_SO):  Rearrange code a little so that all SO
+	stabs cause end_psymtab to be called.
+
+	* buildsym.c (read_sun_builtin_type):  Handle new FCS Sun CC
+	compiler feature of putting 'c' into basic type descriptors for
+	all forms of char.
+
+	* procfs.c (child_resume):  Work around Solaris (on Sparc) lossage
+	where there is no place for nPC in prrun struct.
+
+Thu Jun 25 12:06:00 1992  Fred Fish  (fnf@cygnus.com)
+
+	* mipsread.c:  Pass NULL name pointer to init_type, not 0.
+	* gdbtypes.c (init_type):  Use copy of typename on type_obstack.
+	* dwarfread.c (enum_type):  Save enum names on type_obstack.
+	* dwarfread.c (struct_type):  Save member name on type_obstack.
+	* symtab.c (_initialize_symtab):  Fix misspelling.
+	* regex.c (store_jump, insert_jump):  Return void.
+
+Thu Jun 25 04:00:10 1992  John Gilmore  (gnu at cygnus.com)
+
+	* defs.h (PARAMS):  Move to ../include/ansidecl.h.
+	(alloca):  Declare return type on SPARC, since Sun doesn't.
+	(*_BYTE_ORDER):  Improve comment:  *must* be defined.
+
+	* tm-hppa.h:  New file, architectural definition of HP PA.
+	* tm-hppabsd.h, tm-hppahpux.h:  Shrink to deltas from tm-hppa.h.
+
+	* am29k-pinsn.c, am29k-tdep.c, copying.awk, copying.c,
+	hppa-coredep.c, hppa-pinsn.c, hppabsd-core.c, hppabsd-tdep.c,
+	hppabsd-xdep.c, hppahpux-tdep.c, hppahpux-xdep.c, remote-udi.c,
+	ser-go32.c, xcoffsolib.c:  Remove <stdio.h> which is already in
+	"defs.h".
+
+	* hppa-coredep.c, hppa-pinsn.c, hppabsd-core.c, hppabsd-tdep.c,
+	hppabsd-xdep.c, hppahpux-tdep.c, hppahpux-xdep.c, xcoffsolib.c,
+	xcoffsolib.h, xm-go32.h, xm-hppabsd.h, xm-hppahpux.h:  Copyrights.
+
+Wed Jun 24 12:53:20 1992  John Gilmore  (gnu at cygnus.com)
+
+	* printcmd.c (output_command):  Thinko.
+	(x_command):  Only set remembered size/format if cmd succeeds.
+
+	* dbxread.c (read_ofile_symtab):  Remove N_CATCH special case,
+	since it is no longer used and burns time for every symbol read.
+	(process_one_symbol):  Treat N_CATCH like default (complain).
+
+Wed Jun 24 00:26:56 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* partial-stab.h (case N_TEXT):  Fix fencepost error when
+	detecting start of new symbol info after reading symtab for a
+	module with a zero length TEXT segment.
+
+Tue Jun 23 21:46:26 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.5.6.
+	* coffread.c (coff_end_symtab):  Cast 2nd arg of complain() to
+	correct type.
+	* defs.h (NORETURN):  Define away for Lucid compiler.
+	* remote.c (remote_timer, remote_interrupt):  Signal handlers
+	take one int arg.
+	* ser-termios.c (serial_write, serial_close):  Return whatever
+	value the write/close call returns, rather than falling off end.
+	* inferior.h (PTRACE_ARG3_TYPE):  Third arg to ptrace is int on
+	more systems than it is "char *".  Define PTRACE_ARG3_TYPE to
+	default to int.
+	* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
+	inferior.h (call_ptrace):  Use PTRACE_ARG3_TYPE to declare type
+	of third arg.
+	* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
+	m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
+	pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
+	symm-xdep.c, ultra3-xdep.c:  Use PTRACE_ARG3_TYPE to cast ptrace
+	argument 3.
+	* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
+	store_inferior_registers): Supply missing fourth argument to
+	ptrace().
+	* cadillac.c (kernel_dispatch):  Make return type void.
+	* cadillac.c (iosig):  Signal handlers take one int arg.
+	* valprint.c (val_print_fields):  Call fprint_symbol to get
+	automatic C++ demangling for mangled field names.
+
+Mon Jun 22 20:18:06 1992  Fred Fish  (fnf@cygnus.com)
+
+	* command.c (add_abbrev_prefix_cmd):  Fix misspelling in comment.
+	* dwarfread.c (enum_type):  Fix misspelling in comment.
+	* valprint.c (val_print_fields, cplus_val_print):  Minor
+	adjustment to printing of C++ class structures to more closely
+	match format for printing C structures, with and without setting
+	pretty print.
+
+Mon Jun 22 17:19:02 1992  Per Bothner  (bothner@cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Don't test for SIGEMT
+	(which is not a Posix signal) if it isn't defined.
+	* tm-linux.h, xm-linux.h, config/linux.m[ht], configure.in:
+	New port to Linux (a free Unix clone for 386 machines).
+
+Sat Jun 20 19:19:52 1992  John Gilmore  (gnu at cygnus.com)
+
+	COFF changes for dealing better with EPI 29K C compiler output.
+
+	* coffread.c (record_minimal_symbol):  Pass the minsym type to it.
+	Callers changed.
+	(coff_end_symtab):  Sort blocks if needed.  Complain if misordered.
+	(read_coff_symtab):  Move patch_opaque_types call from
+	coff_symfile_read.  Restrict it to symtabs from this objfile.
+	(process_coff_symbol: C_TPDEF):  Don't put ordinary foward
+	references on opaque type chain; just let coff_lookup_type handle 'em.
+	(decode_type):  Complain about tagndx values on
+	non-struct/union/enum types, which the EPI compiler tends to produce.
+
+	* symtab.c (list_symbols):  Make minimal symbol variable-finding work.
+
+	* tm-68k.h (FIX_CALL_DUMMY): Avoid alignment and byte order
+	dependency.
+
+	* elfread.c (elf_symfile_read):  Update bfd_elf_find_section
+	usage to match new prototype.  Include libbfd.h to get prototype.
+
+	* source.c (find_source_lines):  Handle large st_size fields.
+
+Sat Jun 20 16:28:39 1992  Fred Fish  (fnf@cygnus.com)
+
+	* infcmd.c (jump_command):  Use cleanups to avoid memory leaks.
+	* stack.c (return_command):  Use cleanups to avoid memory leaks.
+
+Fri Jun 19 19:06:41 1992  John Gilmore  (gnu at cygnus.com)
+
+	* remote-adapt.c, remote-eb.c, remote-mm.c:  Lint.  Fix
+	INT_REGNUM to INTE_REGNUM.
+
+	* tm-29k.h (SDB_REG_TO_REGNUM):  Add for EPI 29K C compiler.
+
+Fri Jun 19 15:30:15 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in, dbxread.c, hppa-coredep.c, hppa-pinsn.c,
+	hppabsd-core.c, hppabsd-tdep.c, hppabsd-xdep.c, hppahpux-tdep.c,
+	hppahpux-xdep.c, munch, partial-stab.h, tm-hppabsd.h,
+	tm-hppahpux.h, xm-hppabsd.h, xm-hppahpux.h:  HPPA merge.
+
+	* Makefile.in (c-exp.tab.c, m2-exp.tab.c):  Filter out bogus extern
+	declarations of malloc/realloc/free that are inserted by some
+	versions of yacc.
+	* m2-exp.y:  Prevent conflicts with TRUE and FALSE tokens by
+	#undeffing them.
+	* xm-rs6000.h:  Declare malloc/realloc/free appropriately.  Yet
+	another decl of strdup (this really ought to come from libiberty.h!).
+
+Fri Jun 19 10:28:05 1992  John Gilmore  (gnu at cygnus.com)
+
+	* remote.c (getpkt):  Error if input exceeds buffer size.
+	(_initialize_remote):  `set remotedebug' enables packet trace.
+
+	* dbxread.c (process_one_symbol:N_FUN):  GCC now produces relative
+	N_SLINE's, etc, just like Sun cc on Solaris2.	
+
+	* am29k-tdep.c (read_register_stack, write_register_stack):
+	Change RSTACK_HIGH_ADDR to rstack_high_address, a user-settable
+	variable.  Add `set' and `show' commands for it.
+	* doc/gdb.texinfo:  Document it.
+
+Thu Jun 18 19:35:22 1992  Fred Fish  (fnf@cygnus.com)
+
+	* valprint.c (type_print_1):  Plug memory leak.  Print all
+	C++ syms as demangled, not just functions.
+	* buildsym.c (read_range_type):  When we find a signed char
+	type, do a lookup of signed char, not plain char.  Plain char's
+	still get looked up as plain char's elsewhere.
+
+Thu Jun 18 18:59:04 1992  John Gilmore  (gnu at cygnus.com)
+
+	* eval.c:  Avoid residue-by-zero when evaluating without side effects.
+	(Bug and fix found by Pierre Willard.)
+
+Wed Jun 17 13:08:33 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* xm-rs6000.h:  Fix decls for malloc, realloc, and free.
+
+	* xm-rs6000.h:  Add decl for strdup().
+
+	* tm-rs6000.h:  Remove #include of inferior.h.  Fixes many
+	compilation errors.
+
+	* breakpoint.c (enable_command, disable_command):  Without args,
+	should only affect normal breakpoints and watchpoints.
+
+	* m68k-pinsn.c (print_insn_arg):  Make register be const.
+	* xcoffexec.c:  Remove ' from comment.
+	* xm-sun3os4.h:  Define MALLOC_INCOMPATIBLE to avoid conflicts
+	with decls of malloc in c-exp.tab.c (as produced by yacc).
+	There's got to be a better way to do this...
+
+Wed Jun 17 11:10:40 1992  Fred Fish  (fnf@cygnus.com)
+
+	* partial-stab.h: Convert single rindex use to strrchr.
+	* mipsread.c, dbxread.c:  Remove troublesome inclusion of non-
+	standard <strings.h> file, now that the only single use of
+	rindex in the gdb source files is gone.
+
+Tue Jun 16 22:17:49 1992  Fred Fish  (fnf@cygnus.com)
+
+	* mipsread.c:  Undo ill effects from including <strings.h>,
+	which #defines index to be strchr.  Unfortunately, index is
+	a member of a symbol table structure that can't be changed.
+	* mipsread.c:  tm-mips.h includes coff/symconst.h and coff/sym.h,
+	remove redundant #include's.
+
+Tue Jun 16 14:15:51 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c:  #include <strings.h> for rindex().
+
+Tue Jun 16 09:01:49 1992  Fred Fish  (fnf@cygnus.com)
+
+	* xcoffexec.c (map_vmap):  Turn comment into a real C comment.
+
+Mon Jun 15 18:41:23 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (process_one_symbol), partial-stab.h:  Ignore
+	extraneous SO stabs from busted C++ compilers.
+
+Mon Jun 15 12:21:45 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.5.5.
+	* symtab.c (decode_line_1):  Until C++ support stabilizes, when
+	C++ lookups fail, print possibly helpful hint about completion.
+	* cplus-dem.c (demangle_signature):  Fix ARM style demangling
+	for static data members.
+	* dbxread.c (dbx_psymtab_to_symtab_1):  Fix prototype.
+	* config/ncr3000.mh (INSTALL):  Don't use /usr/ucb/install,
+	it's broken on ncr3000's.
+
+Mon Jun 15 07:21:00 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (decode_modified_type):  Change type of first arg.
+	Change 'modifier' to char from unsigned char.  Cast single use
+	that needs to be unsigned char.
+	* symtab.h (SYMBOL_BASEREG_VALID):  Explain disabling.
+	* utils.c (strdup_demangled):  Add function.
+	* defs.h (strdup_demangled):  Add prototype.
+	* stack.c (return_command):  Demangle C++ function names for query.
+	* infcmd.c (jump_command):  Demangle C++ function names for query.
+	* cplus-dem.c (consume_count):  New function and prototype.
+	* cplus-dem.c (demangle_class, gnu_special, demangle_func_type,
+	do_type):  Replace conversion code with consume_count().
+	* cplus-dem.c (gnu_special):  Fix demangled of static members.
+	* source.c (list_command):  Print demangled function names
+	when appropriate.  Fix supplied by Peter Schauer.
+
+Mon Jun 15 01:45:48 1992  John Gilmore  (gnu at cygnus.com)
+
+	* sparc-tdep.c:  Clean up slightly for Solaris2.
+
+	* buildsym.c (define_symbol):  Nameless types are now on several
+	platforms; generalize them and un-ifdef them to make Solaris 2
+	work.
+
+Sun Jun 14 10:55:51 1992  John Gilmore  (gnu at cygnus.com)
+
+	* infcmd.c:  Fix typo (reported by Rob Savoye).
+	* xm-sun4sol2.h (gregset_t):  Thinko in register set definition.
+	* symtab.h:  Disable SYMBOL_BASEREG_VALID until it works.
+	* dbxread.c (dbx_psymtab_to_symtab_1):  Renamed from
+	psymtab_to_symtab_1.  Use current psymtab's sym_offset and symbol_size,
+	rather than the one for the first file in the dependency chain.
+
+	* dbxread.c (end_psymtab):  Only reset texthigh if it's not already
+	set.  Don't reset our own texthigh, or dependency-only pst's, in
+	scanning all the rest of the psymtabs.
+	(process_one_symbol):  Fix comments around N_OBJ, N_OPT, N_UNDF.
+
+	* buildsym.h (N_UNDF):  Improve comments.
+	(N_LSYM, etc):  Skip types without names (":T(0,3)=sfoob...").
+
+Sat Jun 13 11:16:45 1992  Fred Fish  (fnf at cygnus.com)
+
+	* symtab.h (struct symbol):  Add aux_value union for preserving
+	an additional per-symbol value.
+	* symtab.h (SYMBOL_BASEREG, SYMBOL_BASEREG_VALID):  Add defines.
+	* frame.h (FRAME_GET_BASEREG_VALUE):  Provide default definition.
+	* findvar.c (read_var_value):  Use SYMBOL_BASEREG if valid.
+	* printcmd.c (address_info):  Use SYMBOL_BASEREG if valid.
+	* symmisc.c (print_symbol):  Use SYMBOL_BASEREG if valid.
+
+Sat Jun 13 09:18:46 1992  Michael Tiemann  (tiemann@rtl.cygnus.com)
+
+	* symfile.c (clear_symtab_users_once): Now non-static (for
+	objfiles.c).
+
+Fri Jun 12 18:54:40 1992  John Gilmore  (gnu at cygnus.com)
+
+	* arm-pinsn.c, i960-pinsn.c, m68k-pinsn.c, mips-pinsn.c, 
+	ns32k-pinsn.c, pyr-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, 
+	vax-pinsn.c:  Remove reg_names decl (now in defs.h).
+
+	Solaris-2 support on SPARC:
+
+	* dbxread.c:  Add symbol_size to struct dbx_symfile_info.
+	Add symbol_size and file offsets to struct symloc.
+	Add static symbol_table_offset, string_table_offset,
+	file_string_table_offset, next_file_string_table_offset, 
+	last_function_name.
+	(add_old_header_file):  Convert error() to complain()t.
+	(dbx_symfile_read):  Get symbol size via the objfile.
+	Also get symbol_table_offset.
+	(dbx_symfile_init):  Record symbol size and count via the objfile.
+	(dbx_next_symbol_text):  Always add file_string_table_offset when
+	accessing string table.
+	(read_dbx_symtab):  Initialize file_string_table_offset to 0.
+	(SET_NAMESTRING):  Use the offset.
+	(end_psymtab):  Large kludge to determine addresses where source
+	files start and end (for the psymtab header).
+	(psymtab_to_symtab_1):  Set file_string_table_offset before reading.
+	Get this, symbol size, and symbol offset, from psymtab.
+	(read_ofile_symtab):  Don't back up one symbol for Solaris2.
+	Patch up last_source_start_addr if zero in N_SO.
+	(process_one_symbol):  Add variable function_start_offset.
+	( "", N_FUN, N_LBRAC, N_RBRAC, N_SLINE):  Add ifdef for
+	BLOCK_ADDRESS_FUNCTION_RELATIVE.
+	( "", N_OBJ, N_OPT):  Ignore.
+	(elfstab_build_psymtabs):  New function to read stabs out of
+	an ELF file.
+
+	* Makefile.in:  Accept $(BISON) even though we really want $(YACC).
+	(gdb):  use GLOBAL_CFLAGS when linking, too.
+	* partial-stab.h (N_UNDF):  Deal with Sol2 relative stringtab offsets.
+	(N_OBJ, N_OPT):  Ignore.
+	('f', 'F'):  Save last function name.
+
+	* elfread.c (record_minimal_symbol_and_info):  Kludged to put
+	extra info in the minimal symbol.
+	(elf_symtab_read):  The extra info is the size of an ELF object,
+	which was kludged to us in the `udata' field of the BFD symbol.
+	Gag me with a crowbar...
+	(elf_symfile_read):  Keep track of both the absolute load address,
+	and the offset between load addr and symbols.  Handle STABS as
+	well as DWARF sections, passing the absolute load address to
+	elfstab_build_psymtabs.
+
+	* symfile.h:  Prototype elfstab_build_psymtabs.
+	* symfile.c:  Add almost-OK debug versions of add_psymbol_*to_list.
+
+	* xm-sysv4.h:  Add <limits.h> to avoid conflicting defns in defs.h.
+
+	* buildsym.h:  Add processing_acc_compilation flag.
+	* buildsym.c (read_sun_builtin_type, read_sun_floating_type):  New.
+	(define_symbol):  Skip arg types in function entries.  Resolve
+	overloaded 'P' which acc uses for prototypes of functions called
+	by this file.
+	(read_type: 'b', 'r'):  Handle Solaris2 builtin types.
+
+	* minsyms.c (prim_record_minimal_symbol_and_info):  Hack to
+	save size of ELF symbols.  FIXME.
+	* tm-sun4os5.h:  Rename to tm-sun4sol2.h.  Update defines for Sol2.
+	* xm-sun4os5.h:  Rename to xm-sun4sol2.h.  Hack more defines.
+
+	* configure.in:  Solaris config is sparc-sun-solaris2.
+	* config/sun4os5.m[ht]:  Rename to config/sun4sol2.m[ht]; new xm, tm.
+
+	* objfiles.c (free_objfile):  Eliminate storage leaks.  Contributed
+	by <Peter.Schauer@regent.e-technik.tu-muenchen.dbp.de>. 
+	* symfile.c (symfile_bfd_open):  Comment where name is freed.
+	* symmisc.c (extend_psymbol_list):  Comment where list is freed.
+
+Fri Jun 12 08:24:36 1992  Fred Fish  (fnf at cygnus.com)
+
+	* expprint.c (print_subexp):  Add missing ']'.
+	* defs.h (reg_names):  Fix declaration to match that in infcmd.c
+	* stack.c (reg_names):  Delete redundant (and inconsistent) decl.
+	* WHATS.NEW:  Point out improved C++ function name handling.
+	* gdbtypes.c (lookup_fundamental_type):  For now, use the same
+	type names for both implicitly and explicitly signed integral
+	types.  See comment in the source code.
+
+Thu Jun 11 12:31:50 1992  John Gilmore  (gnu at cygnus.com)
+
+	Two `long long' fixes from Robert R. Henry (rrh@dino.tera.com):
+	* defs.h (longest_to_int):  Avoid void arm of ?: in error case.
+	* expprint.c (print_subexp):  Fix printing of register names.
+
+Thu Jun 11 01:33:40 1992  John Gilmore  (gnu at cygnus.com)
+
+	* inferior.h (register_valid):  Declare.
+	* remote-udi.c, rs6000-xdep.c, sparc-xdep.c, tm-rs6000.h:  Remove decl.
+	* objfiles.h (ALL_OBJFILE_{SYMTABS,PSYMTABS,MSYMBOLS}):  Add
+	macros for traversing the data structures in a single objfile.
+	* tm-m88k.h, tm-sparc.h (REGISTER_NAMES):  Remove extra semicolon.
+	* tm-i960.h (REGISTER_NAMES):  Cosmetic change.
+	* infcmd.c:  Lint.
+
+Tue Jun  9 17:19:45 1992  Fred Fish  (fnf at cygnus.com)
+
+	* c-exp.y, m2-exp.y:  Move remapping defines for malloc and
+	realloc.  Add remapping defines for {yyss, yyssp, yyvs, yyvsp}.
+	* config/{amix.mh, i386v4.mh, ncr3000.mh, stratus.mh,
+	sun4os5.mh}:  Add definition for INSTALL using /usr/ucb/install.
+
+Tue Jun  9 16:29:19 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* depend:  rebuild to account for remote-st2000.c.
+	* remote-st2000.c:  Almost works now.
+	* tm-st2000.h:  Need to turn on HAVE_68881, else things won't compile.
+
+Mon Jun  8 23:05:51 1992  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (yylex):  Recognize single-quoted strings that specify
+	tokens with embedded whitespace, such as C++ demangled names.
+	* defs.h (demangle_and_match, strcmp_iw, skip_quoted):  Prototypes.
+	* main.c (gdb_completer_quote_characters):  Add global variable.
+	* main.c (symbol_completion_function):  Total rewrite for C++
+	demangled name handling.
+	* main.c (skip_quoted):  New function.
+	* main.c (main):  Set rl_completer_quote_characters.
+	* symmisc.c (dump_symtab):  Print source language for symtab.	
+	* symtab.c (expensive_mangler):  Add prototype and function.
+	* symtab.c (completion_list_add_symbol):  Total rewrite for new
+	C++ demangled name handling.
+	* symtab.c (lookup_symbol): Check for demangled C++ symbol first,
+	other changes for demangled C++ symbol handling.
+	* symtab.c (lookup_demangled_block_symbol):  Use demangle_and_match.
+	* symtab.c (lookup_demangled_partial_symbol):  Use demangle_and_match.
+	* symtab.c (decode_line_1):  Recognize C++ demangled names on input.
+	* symtab.c (completion_list_add_symbol):  Total rewrite for new
+	C++ demangled name handling.
+	* symtab.c (expensive_mangler):  New function.
+	* utils.c (strcmp_iw, demangle_and_match):  New functions.
+	* xcoffread.c (aixcoff_symfile_read):  Fix prototype.
+
+Mon Jun  8 21:59:08 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  Roll VERSION to 4.5.4.
+	* Makefile.in, config/*.mh, config/*.mt:  Rename TM_CFLAGS
+	to MT_CFLAGS, XM_CFLAGS to MH_CFLAGS to match file names.
+	* config/sun4os5.mh:  Add MH_CFLAGS=-xs to save debug info.
+
+Mon Jun  8 14:17:42 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* alldeps.mak:  Rebuild to account for new files.
+	* config/st2000.mt:  Use tm-st2000.h, not tm-68k.h.
+	* tm-st2000.h:  New file.
+	* configure.in:  Tandem debug monitor (st2000) support.
+	* remote-st2000.c, config/st2000.mt:  ditto.
+
+Fri Jun  5 11:51:01 1992  John Gilmore  (gnu at cygnus.com)
+
+	* blockframe.c (inside_entry_file, inside_main_func,
+	inside_entry_func):  Return 0 if no symbols; avoid crashing.
+
+Wed Jun  3 17:48:04 1992  John Gilmore  (gnu@cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab):  Set c_sclass from n_sclass
+	without masking, since it is signed and will later be compared
+	against signed quantities.  The right fix is probably to make
+	it all unsigned, but this is a small, safe fix for this release.
+	FIXME -- make the real change sometime soon.
+
+Mon Jun  1 16:16:12 1992  Michael Tiemann  (tiemann@cygnus.com)
+
+	* remote-vx.c (vx_load_command,add_symbol_stub): Default READNOW
+	parameter in call to `symbol_file_add' to 0.
+
+	* xm-sun4os4.h (MALLOC_INCOMPATIBLE): Define it.
+
+Sun May 31 06:38:27 1992  Michael Tiemann  (tiemann@cygnus.com)
+
+	* configure.in: Handle -m680[01234]0-wrs.
+
+Fri May 29 22:16:02 1992  Michael Tiemann  (tiemann@rtl.cygnus.com)
+
+	* m68k-pinsn.c (print_insn_arg): Pass &EXT_FORMAT_68881 to
+	`ieee_extended_to_double'.
+
+Wed May 27 09:27:57 1992  John Gilmore  (gnu at cygnus.com)
+
+	* valops.c (value_assign):  Lint, by Pierre Willard.
+
+Tue May 19 19:38:10 1992  John Gilmore  (gnu at cygnus.com)
+
+	* coredep.c (fetch_core_registers):  Remove premature warning,
+	which triggers on DECstation even though all regs are accessible.
+
+	* m68k-pinsn.c (print_insn_arg):  Use new macros to get
+	sign-extension of instruction fields even on unsigned-char hosts.
+	Bug found by Fred J Roeber, fjr@sgfb.ssd.ray.com.
+
+	88K changes inspired by Ted Lemon (uunet!lupine!mellon):
+	* tm-m88k.h, tm-umax.h:  Avoid sizeof() in REGISTER_xxx macros,
+	since they define the target, not the host.
+	* m88k-pinsn.c:  Fix typo.
+
+Thu May 14 01:16:48 1992  John Gilmore  (gnu at cygnus.com)
+
+	* valarith.c (value_zerop):  -0.0 is still zero.
+	* eval.c (evaluate_subexp):  Avoid NaN anomalies in float compares.
+	Patches by Paul Eggert <eggert@twinsun.com>.
+
+Mon May 18 13:53:51 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* alldeps.mak, depend:  re-make to account for ser-*.c.
+
+Sun May 17 16:51:20 1992  Fred Fish  (fnf@cygnus.com)
+
+	* inflow.c (new_tty):  Temporarily ignore SIGTTOU when
+	disconnecting from controlling terminal, to avoid gdb hanging
+	on SVR4.  Fixes bug reported by Oliver Okrongli.
+	* procfs.c (PROC_NAME_FMT):  Change format to match default used
+	by system, as suggested by Oliver Okrongli.
+	* tm-68k.h (FRAME_FIND_SAVED_REGS):  Apply missing parentheses
+	bug fix from Brent Townshend (bst%tt@cam.ORG).
+	* c-exp.y (nonempty_typelist):  Fix memory overrun bug reported
+	by turlais@rechser.total.fr.
+	* dwarfread.c (decode_subscr_data):  Fix bug in calculation of
+	length of non-zero lowerbound arrays.  Bug fix from Peggy Fieland.
+	* objfiles.h (unlink_objfile):  Add prototype.
+	* objfiles.c (unlink_objfile):  Add function.
+	* objfiles.c (free_objfile):  Call unlink_objfile.
+	* objfiles.c (allocate_objfile):  Call unlink_objfile on newly
+	remapped objfiles.  Bug reported by hahn@sunshine.labs.tek.com.
+	Also, discard old possibly bogus sf struct.
+	* symfile.c (symbol_file_add):  Call init_entry_point_info() and
+	find_sym_fns() for remapped symbol files, in case of any changes
+	since the last mapping.
+
+Wed May 13 18:28:20 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* findvar.c (read_relative_register_raw_bytes): use the raw size
+	of a register to bcopy, rather than the host's sizeof(CORE_ADDR).
+
+Tue May 12 17:44:39 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	Changes to support GDB running on DOS using GO32 and H8 support
+
+	* defs.h: if xm.h doesn't define FOPEN_RB, include "fopen-same.h",
+	allowing hosts with different text and binary file formats to
+	work.
+	* coffread.c (read_coff_symtab): changed calling convention and
+	operation - now it opens its own file with FOPEN_RB rather than
+	duping and fdopening the provided handle.
+	* dbxread.c, cplus-dem.c: #include mangling.
+	* exec.c: If O_BINARY isn't defined, set it to 0, call openp for
+	binary files oring in the right bit.
+	* utils.c, terminal.h, inflow.c: hackery because dos doesn't have terminals.
+	* remote-hms.c: cleanup to use the new remote serial stuff
+	* serial.h, ser-termios.c, ser-go32.c: newfiles to provide host
+	independent remote terminal I/O.
+	* remote.c: if DONT_USE_REMOTE not defined, then don't use it.
+	* source.c (openp): fix off by one problem removing / - can now
+	open a source file in the root directory with DOS.
+	* values.c (value_as_pointer): remove bogus address bits from
+	long. (unpack_long): unpack into unsigned long/short if pointer.
+
+Tue May 12 14:15:48 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (child_attach):  Don't allow gdb to attach to itself.
+	It gets permanently stuck in many OSes.
+	* breakpoint.c, infcmd.c, infrun.c, utils.c:  Change many printfs
+	to printf_filtered.
+	* breakpoint.c: Improve	help text for info breakpoints.
+
+Mon May 11 14:17:18 1992  John Gilmore  (gnu at cygnus.com)
+
+	* README:  Add pointer to internals doc, and describe reading
+	info files.
+	* utils.c (print_sys_errmsg):  Use stderr.  Reported by Pierre Willard.
+	* symtab.c (output_source_filename):  Remove old glop for wrapping
+	lines, use wrap_here.  Reported by Pierre Willard (pierre@la.tce.com).
+
+Thu May  7 11:45:03 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in:  version.c should depend on Makefile, not Makefile.in.
+	* munch:  Add sort -u to avoid duplications.
+	* symtab.c (lookup_symbol):  Improve Stu's fix of 22 April.
+	Improved fix by hahn@sunshine.labs.tek.com (Doug Hahn).
+
+Mon May 11 13:27:46 1992  Fred Fish  (fnf@cygnus.com)
+
+	* cplus-dem.c (demangle_signature):  Recognize misplaced '_' to
+	avoid infinite loops while demangling bogus mangled names.
+	* valprint.c (type_print_base):  Minor fix for GNU style guide
+	conformance.
+
+Sat May  9 18:02:17 1992  Fred Fish  (fnf at fishpond)
+
+	* Makefile.in (VERSION):  Bump to 4.5.3
+	* Makefile.in (DEMANGLE_OPTS):  Remove obsolete -Dnounderscore
+	* Makefile.in (demangle):  New target to create standalone
+	demangler with same code and options as internal demangler.
+	* cplus-dem.c:  Massive restructuring, rewriting, cleanups, etc
+	to support ARM style and Lucid style demangling, improve
+	maintainability, fix several demangling bugs.  More changes
+	to follow.
+	* defs.h (strstr):  Add ANSI compatible prototype.
+	* valprint.c (type_print_1):  Demangle using ansi option.
+	* config/ncr3000.mt (DEMANGLE_OPTS):  Remove -Dnounderscore.
+
+Sat May  9 14:47:28 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* xcoffexec.c (vmap_exec):  Don't assume .text and .data are the
+	first two sections.
+
+Fri May  8 11:42:15 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* mipsread.c (parse_procedure):  Return rather than using
+	uninitialized variable 'b'.
+
+Fri May  8 07:48:27 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in, remote-udi.c, remote-vx.c, 29k-share/dfe/mini2udi.c,
+	29k-share/dfe/yank.c, vx-share/xdr_ptrace.c, vx-share/xdr_regs.c:
+	Remove -I29k-share, -Ivx-share from Makefile.in.  Make #includes
+	relative to each source file.
+
+Fri May  8 07:48:27 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: propogate INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
+	recursions.
+
+Thu May  7 10:00:52 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* am29k-pinsn.c:  Use new opcode table in "opcode/a29k.h".
+	* am29k-tdep.c:  Update to latest code from AMD.
+	(get_saved_register) don't crap out if no frame.
+	* remote-udi.c:  Set/clear inferior_pid as appropriate.
+	(udi_open) call target_preopen, don't close fd 0!!!, clean up
+	error handling.  Fixup end-of-debugging messages.
+	(udi_fetch_registers) clean up big time, mainly don't multiply
+	register_valid indices by 4, and use proper Offset when reading
+	gr96-gr127.  (udi_store_registers) general cleanup.
+	(fetch_register) cleanup, simplify.  (regnum_to_srnum)
+	INT_REGNUM->INTE_REGNUM.
+	* tm-29k.h:  Upgrade to latest code from AMD.
+	* 29k-share/udi/udip2soc.c:  Get rid of useless errmsg_m macro.
+	(UDIConnect) Clean up error processing (like, don't do exit() if
+	execlp fails), make code restartable, make more attractive.
+	(UDIStop) Use SIGINT instead of SIGUSR1, as isstip won't stop
+	otherwise.
+
+Wed May  6 14:34:18 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* tm-irix3.h:  Re-define CPLUS_MARKER to '.'.
+	* xm-rs6000.h, tm-rs6000.h:  Move re-definition of CPLUS_MARKER
+	from former to latter.
+
+Wed May  6 14:12:35 1992  Fred Fish  (fnf@cygnus.com)
+
+	* cplus-dem.c (do_args):  Handle void args the same as others.
+	* objfiles.c (free_objfile):  Only try to unmap files when
+	reusable objfiles are supported.
+	* valprint.c (type_print_varspec_suffix):  Add parameter that
+	specifies if C++ demangling included function arguments.  Use
+	it to suppress printing extra pair of ()'s.
+	* valprint.c (type_print_1):  Fix problem with printing demangled
+	C++ function types where demangled type includes the function
+	args.
+
+Tue May  5 11:10:27 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (DEMANGLER):  Define and default to cplus-dem.
+	Allows selection of C++ demangler to be a configuration option
+	until multiple demanglers are supported.
+	* demangle.h:  New include file for extended demangler support.
+	* breakpoint.c, gdbtypes.c, printcmd.c, stack.c, symtab.c,
+	utils.c, valprint.c:  Include "demangle.h" and change all calls
+	to cplus_demangle() or fputs_demangled() to use individual
+	demangling options.
+	* valprint.c (type_print_1):  Change options to cplus_demangle
+	to print demangled function args.  Still broken, but now less so.
+	* cplus-dem.c:  Include demangle.h, reorganize and update some
+	comments to reflect reality.
+	* cplus-dem.c (cplus_demangle, cplus_mangle_opname):  Change
+	second arg from fixed integer to bit based multiple options.
+	* cplus-dem.c (optable):  Reformat and replace ansi members with
+	bit based options.
+	* cplus-dem.c (do_type):  Fix bug with parsing missing return type.
+
+Mon May  4 22:26:59 1992  John Gilmore  (gnu at cygnus.com)
+
+	* values.c (set_internalvar):  Force evaluation of lazy values.
+	Bug reported by RMS.
+
+Sun May  3 15:47:45 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.5.2.
+	* Makefile.in (DEMANGLE_OPTS):  Add, default to -Dnounderscore.
+	* configure.in:  Simplify ncr3000 gdb_host logic, add gdb_target.
+	* dwarfread.c (struct_type):  Apply fix from Peggy Fieland for
+	proper handling of bit fields.
+	* gdbtypes.h (struct type):  Clarify use of field.bitpos.
+	* symtab.h:  Fix couple of misspellings in comments.
+	* value.h (struct value):  Clarify use of bitpos.
+	* value.h (unpack_field_as_long):  Change prototype, returns
+	LONGEST.
+	* values.c (unpack_field_as_long):  Change return type to LONGEST,
+	sign extend unpacked fields that are signed, other rewriting.
+	* config/ncr3000.mt:  New target config file.
+
+Fri May  1 01:53:26 1992  John Gilmore  (gnu at cygnus.com)
+
+	* utils.c (printchar):  Print 0x7F and 0x80-0x9F in \nnn notation
+	even when printing 8-bit characters.
+
+	* gdbtypes.c (make_{reference,pointer,function}_type):  New
+	functions which handle overwriting of forward-referenced types
+	for stabs file reading.
+	(lookup_{reference,pointer,function}_type):  These just call
+	the make_*_type functions with a null storage alloc parameter.
+	* gdbtypes.h (make_{reference,pointer,function}_type):  Declare.
+	* xcoffread.c (smash_to_pointer_type):  Remove, no longer used.
+
+	* buildsym.c (dbx_lookup_type):  Zero result for (-1,-1) arg.
+	(dbx_alloc_type):  Make it easier to understand.  No funct change.
+	(define_symbol: 't'):  Don't put the typedef name into the name of
+	the struct, union, or enum.  Bugfix.
+	(read_type: '*', '&', 'f'):  Add comments.  Use make_XXX_type
+	routines to properly handle overwriting preallocated types so that
+	forward references will work.
+	(read_enum_type):  Force enum values to file scope, due to bug in
+	Sun compiler output.  FIXME, fix later.
+
+	Remove unused header_file_prev_index mechanism.  It was already
+	obsolete in gdb-3.5.  These comments appeared in 3.5:
+	  /* This code was used before I knew about the instance codes.
+	     My first hypothesis is that it is not necessary now
+	     that instance codes are handled.  */
+	* dbxread.c (add_new_header_file):  Remove header_file_prev_index.
+	* buildsym.h:  Remove it and prev_index that saves it.
+	* buildsym.c (push_subfile, pop_subfile, start_symtab):  Remove it.
+
+	* solib.c (special_symbol_handling):  When called from core files,
+	must set up debug_addr.  Don't print error messages, just return.
+	* symmisc.c (print_symbol):  Less ascii diarrhea for enums, please.
+
+Wed Apr 29 15:26:51 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* cplus-dem.c:  Allow nested class names (as in
+	Foo::Bar::method()).
+	Allow the cleaner cfront style of nested class names
+	(Q2_3Foo3Bar as well as Q23Foo3Bar).
+	Make cplus_demangle re-entrant by removing use of global
+	variables.  Instead, place all shared variables in a
+	stack-allocated structure, and pass around its address.	
+
+Fri Apr 24 07:41:19 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (make-proto-gdb-1):  1st cut at packaging
+	29k-share/* subdirs...
+
+	* remote-udi.c (udi_insert/remove_breakpoint):  Completely
+	rewrite, only leave out the bugs.
+
+	* Makefile.in:  Add 29k/UDI support.  Improve depend.
+	* alldeps.mak, configure.in, depend:  Add 29k/UDI support.
+
+	* am29k-tdep.c:  Update to use new calling conventions, and misc
+	symbol elements.
+
+	* m68k-pinsn.c (print_insn_arg):  Make branch offsets be signed.
+
+Thu Apr 23 18:43:17 1992  Fred Fish  (fnf@cygnus.com)
+
+	* tm-29k.h:  Set DECR_PC_AFTER_BREAK to 0, as 29ks have nice
+	breakpoint instructions that leave PC pointing at the right place.
+
+	* core.c (core_open):  Call warning() to print warnings.
+
+Wed Apr 22 09:55:42 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* symtab.c (lookup_symbol):  Need to check if msymbol->name is
+	NULL, as ALL_MSYMBOLS will never return a NULL msymbol pointer.
+	This prevents a crash when trying to lookup the value of a
+	non-existent symbol.
+
+Wed Apr 22 09:42:15 1992  Fred Fish  (fnf@cygnus.com)
+
+	* signame.c, signame.h:  Remove, replaced by strsignal.c in
+	libiberty.
+	* i960-tdep.c, infrun.c, mach386-xdep.c, procfs.c, sparc-tdep.c,
+	sun386-xdep.c:  Remove include of signame.h	
+	* Makefile.in (SFILES_MAINDIR):  Remove signame.c
+	* Makefile.in (HFILES):  Remove signame.h
+	* Makefile.in (OBS):  Remove signame.o
+	* defs.h (safe_strerror, safe_strsignal, strerrno, strsigno,
+	errno_max, signo_max, strtoerrno, strtosigno, strsignal,
+	psignal, perror):  Add prototypes.
+	* defs.h, xm-apollo68v.h, xm-ultra3.h (SYS_SIGLIST_MISSING):
+	Remove define.
+	* depend:  Manually remove signame.[cho] references.
+	* convex-tdep.c (subsig_name):  Replace use of sys_siglist with
+	strsignal.
+	* convex-xdep.c (core_file_command):  Replace use of sys_siglist
+	with safe_strsignal.
+	* core.c (core_open):  Replace use of sys_siglist with
+	safe_strsignal.
+	* core.c (memory_error):  Replace use of sys_errlist with
+	safe_strerror.
+	* i960-tdep.c (print_fault):  Replace use of sys_siglist with
+	safe_strsignal.
+	* infcmd.c (program_info):  Replace use of sys_siglist with
+	safe_strsignal.
+	* infrun.c (signal_stop, signal_print, signal_program):
+	Allocate dynamically based on dynamic determination of number
+	of signals to support.
+	* infrun.c (child_create_inferior):  Replace use of sys_errlist
+	with safe_strerror.
+	* infrun.c (wait_for_inferior):  Replace use of sys_siglist with
+	safe_strsignal.
+	* infrun.c (sig_print_info):  Replace use of sig_abbrev with
+	strsigno and sys_siglist with safe_strsignal.
+	* infrun.c (handle_command):  Call signo_max to find number of
+	signals.  Replace sig_number with strtosigno and sig_abbrev with
+	strsigno.
+	* infrun.c (signals_info):  Replace sig_number with strtosigno.	
+	* infrun.c (_initialize_infrun):  Call signo_max to find number of
+	signals.  Dynamically allocate signal_{stop,print,program}.
+	* procfs.c (errno_table):  Remove, now in libiberty/strerror.c.
+	* procfs.c (errnoname):  Add function and prototype.
+	* procfs.c (info_proc_siginfo):  Call errnoname, replace use
+	of sys_siglist with safe_strsignal.
+	* procfs.c (info_proc_stop, info_proc_signals):  Replace use of
+	sys_siglist with safe_strsignal.
+	* procfs.c (info_proc_stop):  Call errnoname.
+	* procfs.c (signalname):  Replace sig_abbrev with strsigno.
+	* stuff.c (main, get_offset):  Replace use of sys_errlist with
+	strerror.
+	* sun386-xdep.c (core_file_command):  Replace use of sys_siglist
+	with safe_strsignal.
+	* umax-xdep.c (core_file_command):  Replace use of sys_siglist
+	with safe_strsignal.
+	* utils.c (safe_strerror, safe_strsignal):  Add functions that
+	call strerror and strsignal respectively, and deal with NULL
+	returns.
+	* utils.c (perror_with_name, print_sys_errmsg):  Replace use of
+	sys_errlist with safe_strerror.
+	* valprint.c (val_print):  Replace use of sys_errlist with
+	safe_strerror.
+
+Tue Apr 21 12:00:47 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: rework CFLAGS so that they can be set from the
+	  command line to make.  CFLAGS -> INTERNAL_CFLAGS.
+	  USER_CFLAGS -> CFLAGS.  Remove MINUS_G.  Default CFLAGS to -g.
+	  Pass CFLAGS on recusions.
+
+Fri Apr 17 19:25:57 1992  Fred Fish  (fnf@cygnus.com)
+
+	* gdbtypes.h, c-exp.y, m2-exp.y, mipsread.c, gdbtypes.c:  Back
+	out of change on 4/14/92 and remove TYPE_FLAG_FUND_TYPE.  It was
+	overkill for the problem it solved.
+	* valprint.c (type_print_base):  Remove TYPE_FLAG_FUND_TYPE test
+	and default to simply printing type names as appropriate.
+	* main.c (main):  Remove one of the leading newlines from
+	warning_pre_print initialization.
+	* objfiles.c (open_existing_mapped_file):  Add function and
+	prototype.
+	* objfiles.c (open_mapped_file):  Rewrite to use new function
+	open_existing_mapped_file.
+
+Thu Apr 16 23:50:12 1992  John Gilmore  (gnu at cygnus.com)
+
+	* sun3-xdep.c (fetch_core_registers):  Lint.
+	* tm-sun3.h:  Prototype lint.
+	* value.h:  Typo.
+
+Thu Apr 16 19:56:50 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (TARGET_FT_POINTER_SIZE, TARGET_FT_LONG_SIZE):
+	Define using TARGET_PTR_BIT and TARGET_LONG_BIT for now.
+	* objfiles.c:  Cast calls to close() with unused returns to void.
+	* objfiles.c (allocate_objfile):  Initialize objfile's mmfd, free
+	old objfile's name before updating it.
+	* objfiles.c (free_objfile):  Major rewrite for mapped objfiles.
+	* objfiles.h (objfile struct):  Add mmfd member.
+	* symfile.c (syms_from_objfile):  Move some code to
+	new_symfile_objfile.
+	* symfile.c (new_symfile_objfile):  Add new function, common code
+	from syms_from_objfile.
+	* symfile.c (symbol_file_add):  Call new_symfile_objfile for both
+	mapped and unmapped symbol files.
+	* symfile.c (symbol_file_command):  Print "No symbol file now"
+	message, ala exec_file_command for the exec file.
+	* symfile.h (new_symfile_objfile):  Add prototype.	
+	* xcoffexec.c (map_vmap):  Add call to new_symfile_objfile.
+	* xcoffsolib.c (solib_add):  Add call to new_symfile_objfile.
+
+Thu Apr 16 18:26:34 1992  Per Bothner  (bothner@cygnus.com)
+
+	* rs6000-pinsn.c:  New version from IBM (Metin).
+	* m2-exp.y:  Re-write string initializers ("<>" => {'<', '>'})
+	to avoid warnings from some compilers.
+
+Tue Apr 14 22:33:55 1992  Fred Fish  (fnf@cygnus.com)
+
+	* gdbtypes.h (FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL):  Add defines.
+	* gdbtypes.h (TYPE_FLAG_FUND_TYPE):  Add define for bit in a
+	type's flag word that marks it as a fundamental type.
+	* c-exp.y (_initialize_c_exp): Add TYPE_FLAG_FUND_TYPE bit to
+	flags argument for all calls to init_type().
+	* m2-exp.y (_initialize_m2_exp): Add TYPE_FLAG_FUND_TYPE bit to
+	flags argument for all calls to init_type().  Also remove
+	dependency on host sizes for ints, floats, etc.
+	* mipsread.c (_initialize_mipsread): Add TYPE_FLAG_FUND_TYPE bit to
+	flags argument for all calls to init_type().  Also remove
+	dependency on host sizes for ints, floats, etc.
+	* gdbtypes.c (lookup_fundamental_type):  Add TYPE_FLAG_FUND_TYPE
+	bit to flags argument for all calls to init_type().  Add types
+	FT_FIXED_DECIMAL and FT_FLOAT_DECIMAL.
+	* valprint.c (unsigned_type_table, signed_type_table,
+	float_type_table):  Remove.
+	* valprint.c (type_print_base):  Test new TYPE_FLAG_FUND_TYPE
+	bit when printing fundamental types, and print the actual name
+	for such types, rather than inventing one.  Remove code that
+	invented fundamental type names.
+	* valprint.c (_initialize_valprint):  Remove initializations
+	for now removed unsigned_type_table, signed_type_table, and
+	float_type_table.
+
+Tue Apr 14 14:30:46 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* remote-vx.c, vx-share/xdr_ptrace.c, vx-share/xdr_ptrace.h,
+	vx-share/xdr_rdb.h:  Update for new remote protocol under VxWorks
+	5.0.2.
+
+Mon Apr 13 20:59:21 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (target_to_host):  New function similar to previous
+	swapin function.
+	* dwarfread.c (SWAPIN, swapin):  Remove macro and support function.
+	Extensive changes to convert all previous usages to use new
+	target_to_host() function.
+	* dwarfread.c (struct dieinfo):  Change types of most integral
+	members to be unsigned.
+
+Mon Apr 13 15:59:10 1992  John Gilmore  (gnu at cygnus.com)
+
+	* WHATS.NEW:  Revise -mapped doc.
+
+Sat Apr 11 23:14:36 1992  John Gilmore  (gnu at cygnus.com)
+
+	* mipsread.c (parse_partial_symbols):  Complain when sh->index is
+	too high or when skipping `forwards' moves us backwards.
+	(parse_type):  Print mis-guessed tag name in complaint.
+	(parse_external):  Eliminate cur_stab and obscure top_stack clobbers.
+	(parse_procedure):  Do not attempt to create symbols; just fill in
+	the SYMBOL_VALUE field of a .gdbinfo. symbol if we can find one.
+	(psymtab_to_symtab_1):  Split up `stabs' from `native ecoff' code
+	for clarity.  Set top_stack before calling parse_external.  In
+	stabs, sort symbols before calling parse_procedure.
+	* mipsread.c:  Lint.
+	* symmisc.c (std_in, std_out, std_err):  Add vars to access std
+	FILE *'s when debugging GDB (e.g. as args to dump_symtab).
+	* Makefile.in:  Remove stage* targets.  Avoid echo on recursive
+	makes.  Eliminate doc/Makefile from tar.Z file if doc/Makefile.in
+	exists.
+
+Fri Apr 10 23:47:37 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in (VERSION):  Set to 4.5.1.
+	* xcoffread.c (NO_TYPEDEFS):  Fix typo in commented-out #define.
+	* sparc-tdep.c (supply_gregset, fill_gregset, supply_fpregset,
+	fill_gregset):  New functions for SVR4 /proc support.
+	* mipsread.c:  Cleanup.  Add more complaints for unhandled cases.
+	Remove new symbol types and such to ../include/coff/symconst.h.
+	(parse_symbol):  Simplify code for parsing struct/enum/unions.
+	(parse_type):  Handle `long long' types.
+	(upgrade_type):  Handle `const' qualifier.
+	(parse_partial_symbols):  fix indentation, clean a bit.	
+
+Fri Apr 10 22:41:03 1992  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (SWAPIN,swapin):  New macro and function to call to
+	copy in data from raw read buffers, calling bfd byteswapping
+	routines as appropriate.  Use to replace most existing memcpy
+	calls.
+	* dwarfread.c (basicdieinfo, completedieinfo):  Add objfile arg.
+	* configure.in:  Recognize new ncr3000 config.
+	* config/ncr3000.mh:  New config file.
+
+Fri Apr 10 08:30:58 1992  Stu Grossman  (grossman at cygnus.com)
+
+	GDB-4.5 release!
+
+	* README:  Update for release.
+	* Makefile.in:  Update version to 4.5.
+	* WHATS.NEW:  The obvious.
+
+	* depend:  Generate new depend file for this release.
+
+	* Makefile.in (depend):  Fix dependancy generation so that it does
+	not include gcc 'fixincluded' files, which are usually in a system
+	specific location.
+
+Thu Apr  9 13:35:00 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik).
+	* buildsym.c  (#ifdef RS6000_TARGET):  Don't create unnecessary
+	symbols for nameless types.  And, handle `R' (register parameter
+	type) for AIX.  (an extension to existing stabstring grammar).
+	* rs6000-xdep.c:  Fix typo (= should have been ==).
+
+Thu Apr  9 12:10:06 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  version=4.4.88, add xm-vax.h to HFILES.
+
+Thu Apr  9 02:29:03 1992  John Gilmore  (gnu at cygnus.com)
+
+	* xm-sun4os5.h (DO_DEFERRED_STORES, CLEAR_DEFERRED_STORES):  Zap.
+	* signame.c (SIGWAITING, SIGLWP):  Add.
+
+Tue Apr  7 16:34:07 1992  Per Bothner  (bothner@cygnus.com)
+
+	* xm-i386mach.h:  add decls for errno and strdup().
+
+	* breakpoint.c (breakpoint_1):  Add (int) casts for enums
+	used in array index context (otherwise, some compilers barf).	
+
+Tue Apr  7 08:45:46 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* m68k-tdep.c, tm-sun3.h:  #ifdef around get_longjmp_target().
+	Change def of SAVED_PC_AFTER_CALL to call routine to see if we are
+	in a system call, and provide better backtrace if so.
+
+	* Makefile.in (HFILES):  Add xcoffsolib.h.
+	* rs6k-opcode.h:  Move to ../include/opcode/rs6k.h.
+	* rs6000-pinsn.c:  #include "opcode/rs6k.h"
+
+	* mipsread.c (read_mips_symtab, read_the_mips_symtab,
+	mipscoff_symfile_read):  Convert to BFD to do file I/O.
+
+	* symfile.c:  #include <ctype.h> to get proper def if isspace().
+
+	* i386-tdep.c (get_longjmp_target):  #ifdef GET_LONGJMP_TARGET.
+
+Mon Apr  6 17:25:45 1992  Per Bothner  (bothner@cygnus.com)
+
+	* mipsread.c: Create a .gdbinfo pseudo-symbol for each
+	function also when parsing embedded stabs.
+
+Mon Apr  6 15:25:03 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c:  Fix more declarations.
+
+	* mipsread.c:  Fix many invocations of complain.  Use enum
+	type_code where appropriate.
+
+	* xm-vaxult.h:  Add decl for strdup().
+
+	* Makefile.in: Add dependancies for xm-vaxbsd.h and xm-vaxult.h
+	for xm-vax.h.
+
+Fri Apr  3 17:41:29 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* buildsym.h, dbxread.c, mipsread.c:  Add objfile arg to
+	process_one_symbol.
+
+Fri Apr  3 12:17:14 1992  Per Bothner  (bothner@cygnus.com)
+
+	* munch: Must pre-pend "_" to "initialize" for SYSV style nm.
+	* tm-rs6000.h, xcoffexec.c, xcoffread.c, xm-rs6000.h:
+	Merge in more patches for rs6000 from Metin Ozisik.
+	* utils.c:  Fix typo in comment.
+
+Fri Apr  3 11:23:03 1992  Fred Fish  (fnf@cygnus.com)
+
+	* procfs.c (procinfo struct):  Add nopass_next_sigstop member.
+	* procfs.c (attach):  Set nopass_next_sigstop if attached 
+	process is forcibly stopped.
+	* procfs.c (child_resume):  Use nopass_next_sigstop to suppress
+	resending SIGSTOP to attached process on first resume.
+
+Fri Apr  3 01:37:26 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (SFILES_MAINDIR):  add mipsread.c
+
+Thu Apr  2 20:20:54 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in (OBS):  Compile mipsread.c for all targets now.
+	(VERSION):  Bump to 4.4.85.
+	* mipsread.c:  Update for new include files.  Lint.
+	* tm-irix3.h, tm-mips.h:  Use new include files for ECOFF symtab.
+	* config/{bigmips.mt, littlemips.mt, irix3.mt, decstation.mt}:
+	Don't need to bring in mipsread.o specially any more.
+
+Thu Apr  2 19:38:31 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c (fixup_sigtramp):  Also look for _sigtramp as a real
+	routine (for Irix-4.x).  Make many funcs static and void.
+	* mips-tdep.c (mips-frame-chain):  Clean up, simplify.
+	* (init_extra_frame_info):  Don't trash cached value of frame
+	pointer register.  This fixes backtracing through routines that use
+	alloca().  Generally clean up declarations of functions, and use
+	typedefs and macros to reference data structures as appropriate.
+	* tm-irix3.h, tm-mips.h (EXTRA_FRAME_INFO):  use proper type for
+	proc_desc element.
+
+Thu Apr  2 09:47:11 1992  Fred Fish  (fnf@cygnus.com)
+
+	* values.c (unpack_long):  Fix unpacking error for signed chars
+	on hosts where the default character type is unsigned.
+	* procfs.c (pr_flag_table, pr_why_table):  Add some entries
+	for newer SVR4 variants.
+	* procfs.c (proc_set_exec_trap):  Reorder tests for ioctl's that
+	turn off trace inherit-on-fork flag to favor latest SVR4 method.
+	* procfs.c (mappingflags):  Add support for MA_PHYS
+
+Thu Apr  2 00:55:56 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (read_struct_type):  Avoid coredump when C++
+	abbreviated type name is messed up.  Reported by Joe Buck.
+	FIXME, we need to determine whether GDB or GCC needs to be
+	smarter to correctly locate this type name.
+
+	* c-exp.y, coffread.c, command.c, command.h, copying.awk,
+	dbxread.c, gdbtypes.c, infcmd.c, inferior.h, infrun.c,
+	m2-exp.y, printcmd.c, remote.c, solib.c, source.c, stack.c,
+	symtab.c, tm-sun4os4.h, tm-sun4os5.h, values.c:  Lint.
+	* symfile.c (add_symbol_file_command):  Initialize mapped/readnow.
+
+Wed Apr  1 11:39:52 1992  Fred Fish  (fnf@cygnus.com)
+
+	* breakpoint.h (bpdisp, bptype):  Remove trailing comma.
+	* symtab.h (current_source_symtab):  Make extern
+	* symtab.h (current_source_line): Make extern
+	* inferior.h:  Move all procfs.c prototypes to one place, add
+	prototype for proc_signal_handling_change.  Add prototypes for
+	signal_stop_state, signal_print_state, and signal_pass_state.
+	* inferior.h (stop_soon_quietly):  Make extern
+	* inferior.h (attach_flag):  Make extern
+	* infrun.c (NOTICE_SIGNAL_HANDLING_CHANGE):  Default is null.
+	* infrun.c (signal_stop_state, signal_print_state,
+	signal_pass_state):  New functions to query specific signal
+	handling flags.
+	* infrun.c (handle_command):  Minor error message change, add
+	NOTICE_SIGNAL_HANDLING_CHANGE.
+	* procfs.c (open_proc_file):  Remove iris specific reset of
+	inherit-on-fork flag, moved to proc_set_exec_trap().
+	* procfs.c (proc_set_exec_trap):  Add SVR4 and iris code
+	to reset inherit-on-fork flag, bash comment to GNU form.
+	* procfs.c (proc_base_address, set_proc_siginfo,
+	fetch_core_registers):  Conform to code style.
+	* procfs.c (signame.h):  Include.
+	* procfs.c (MAX_SYSCALLS, syscall_table[], init_syscalltable(),
+	syscallname(), info_proc_syscalls()):  New macros, tables, and
+	functions to organize and report system call information.
+	* procfs.c (saved_fltset, saved_trace, saved_sighold,
+	saved_exitset, saved_entryset):  Add to procinfo struct.
+	* procfs.c (struct trans):  Add.
+	* procfs.c (pr_flag_table, pr_why_table, faults_table,
+	siginfo_table, errno_table):  Tables to translate numeric values
+	to symbolic names and short descriptions.
+	* procfs.c (signalname, info_proc_signals):  Add function and
+	prototype.
+	* procfs.c (proc_info):  Now info_proc.
+	* procfs.c (proc_info_address_map):  Now info_proc_mappings.
+	* procfs.c (info_proc_flags, info_proc_stop, info_proc_siginfo,
+	info_proc_faults, lookupname, lookupdesc, sigcodename,
+	sigcodedesc):  New functions.
+	* procfs.c (proc_signal_handling_change):  New function to set
+	the trace flags based on the state of gdb's signal handling flags.
+	* procfs.c (inferior_proc_init):  Call proc_signal_handling_change
+	and remove code to do PIOCSTRACE ioctl.
+	* procfs.c (attach, detach):  Preserve and restore process flags
+	using saved_* fields in procinfo struct.
+	* procfs.c (attach):  Call proc_signal_handling_change.
+	* procfs.c (info_proc):  Major rework to expand "info proc" cmd.
+	* procfs.c (proc_desc):  Update for latest changes.
+	* xm-irix4.h (CREATE_INFERIOR_HOOK):  Protect by USE_PROC_FS.
+	* xm-irix4.h (NOTICE_SIGNAL_HANDLING_CHANGE):  Add definition.
+	* xm-sysv4.h (NOTICE_SIGNAL_HANDLING_CHANGE):  Add definition.
+
+Tue Mar 31 18:38:28 1992  Fred Fish  (fnf@cygnus.com)
+
+	* procfs.c (set_proc_siginfo):  Add prototype and new function.
+	* procfs.c (detach, child_resume):  Call set_proc_siginfo to set
+	up inferior siginfo struct.
+	* elfread.c (elf_symfile_read):  Compute the relocation amount
+	by subtracting off the address of the ".text" section.
+	* solib.c:  Add pointer to ".text" section to so_list struct.
+	* solib.c (solib_map_sections):  Initialize pointer to ".text"
+	section in so_list struct.
+	* solib.c (symbol_add_stub):  Pass base address of ".text"
+	section to symbol_file_add, rather than the load address of
+	the shared library.  On SunOS they are the same.  On SVR4 they
+	are not.
+
+Tue Mar 31 17:48:15 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mipsread.c (parse_procedure):  PDR.isym should get pointer to
+	function name, not .gdbinfo. symbol.
+
+Tue Mar 31 17:05:04 1992  John Gilmore  (gnu at cygnus.com)
+
+	* breakpoint.c (breakpoint_1):  Fix prototype, this time for sure!
+
+Tue Mar 31 11:01:06 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (VERSION):  4.4.8
+
+	* procfs.c (open_proc_file):  Disable inherit-on-fork flag so that
+	commands in .cshrc/.profile won't get traced.
+
+Tue Mar 31 08:11:58 1992  John Gilmore  (gnu at cygnus.com)
+
+	* elfread.c (elf_symtab_read):  Use xmalloc, not bfd_xmalloc.
+	* exec.c (build_section_table):  Don't abort if no sections.
+	* sparc-tdep.c (single_step):  Lint.
+	* utils.c (mrealloc):  Handle realloc (0, size) case here.
+
+Mon Mar 30 16:50:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (alldeps.mak):  Config files are now *.m[ht] as
+	opposed to m[ht]-*!
+
+	* config/irix4.mh:  Don't use coredep.o.  It doesn't work with procfs.
+
+	* mipsread.c (parse_symbol, parse_procedure):  Re-do the way that
+	.gdbinfo. symbols are created.  Move creation from parse_procedure
+	to parse_symbol, where it is fairly easy to grow the symtab.  This
+	also fixes a symtab trashing bug on all mips-based systems.
+	* (got_numargs, lookup_numargs, free_numargs):  Delete.  Not
+	needed anymore.
+	* tm-mips.h, tm-iris3.h, mips-tdep.c, mipsread.c:  Re-do struct
+	mips_extra_func_info, and all the PROC_xxx macros that look at it.
+
+Mon Mar 30 14:17:53 1992  Per Bothner  (bothner@cygnus.com)
+
+	* c-exp.y:  Add missing return type to yyparse() prototype.
+
+Sat Mar 28 22:22:06 1992  John Gilmore  (gnu at cygnus.com)
+
+	Create and use macros for iterating on symtabs, psymtabs, msymbols.
+
+	* minsyms.c (iterate_over_msymbols):  Remove; clunky and slow.
+	* symfile.h, symtab.h (iterate_over_msymbols):  Remove prototype
+	* coffread.c (coff_symfile_read):  iterate_over_symtabs => ALL_SYMTABS.
+	(patch_opaque_types):  Avoid dummy args and result.
+	* objfiles.c (have_partial_symbols, have_full_symbols,
+	have_minimal_symbols):  explicit iteration => ALL_OBJFILES; simplify.
+	(iterate_over_objfiles, iterate_over_symtabs,
+	iterate_over_psymtabs):  Remove, clunky and slow.
+	* objfiles.h:  Replace iterate_over_* prototypes with ALL_SYMTABS,
+	ALL_PSYMTABS, and ALL_MSYMBOLS macros.
+	* symmisc.c (dump_symtab, dump_psymtab, dump_msymbols,
+	dump_objfile):  Remove dummy args and results.  Move filename
+	comparisons to callers.
+	(printsyms_command, printpsyms_command, printmsyms_command,
+	printobjfiles_command):  iterate_over_* => ALL_*.  Compare filenames.
+	* symtab.c (lookup_symtab_1, lookup_symtab, lookup_partial_symtab,
+	lookup_symbol, find_main_psymtab, find_pc_symtab, sources_info,
+	list_symbols, make_symbol_completion_list):  Replace explicit
+	iteration with ALL_SYMTABS, ALL_PSYMTABS, or ALL_MSYMBOLS.
+	Eliminate Dijkstra flag crap, break out of loops with gotos.
+	(lookup_symtab_1):  Protect '/' tests from short filenames.
+	(cplus_mangled_symbol):  Move inline into lookup_symbol.
+	* xcoffexec.c (relocate_objfile_msymbols):  Remove poor hack.
+	(relocate_minimal_symbol):  Move inline to vmap_symtab.
+	(vmap_symtab):  Replace iteration with ALL_OBJFILES,
+	iterate_over_msymbols with ALL_MSYMBOLS.
+
+	Misc cleanup prior to release.
+
+	* Makefile.in (VERSION):  Roll to 4.4.7.
+	(HFILES):  Add call-cmds.h.
+	* call-cmds.h:  New header for command fns called by other files.
+	* breakpoint.c (watchpoints_info):  Remove, same as breakpoints_info.
+	(breakpoint_1):  Remove unused type arg.  Change callers.
+
+	* dwarfread.c (dwarf_build_psymtabs):  Remove mainline test.
+	* mipsread.c (compare_symtabs, compare_psymtabs):  Remove, unused.
+	* mipsread.c:  Add prototypes for all static functions.
+
+	* symmisc.c (dump_symtab_lines, dump_symtabs, dump_last_symtab,
+	dump_blockvector, dump_block, dump_addrchass, dump_namespace,
+	dump_symbol, dump_type, dump_linetable, dump_strtbl):  Remove, unused.
+	* xcoffread.c (dump_symtab_lines, dump_symtabs, dump_last_symtab,
+	dump_blockvector, dump_block, dump_addrchass, dump_namespace,
+	dump_symbol, dump_type, dump_linetable, dump_strtbl):  Remove 2nd
+	unused copy!
+
+	* buildsym.c (define_symbol):  Handle global register variables
+	(from Pierre Willard).  Complain if register numbers are too large.
+	* target.c (nomemory):  Now that higher levels examine errno, give EIO.
+	* tm-sparc.h:  Don't #include <sun4/reg.h>.
+	* sparc-tdep.c (sparc_frame_chain, frame_saved_pc):  Remove
+	dependency on <sun4/reg.h>.  Start to handle cross-byte-order.
+
+	* language.h:  Avoid forward enum declaration.
+	* configure.in, tm-sun4os5.h, xm-sun4os5.h, config/sun4os5.mh,
+	config/sun4os5.mt:  New host and target.
+	* defs.h (errno): #include <errno.h> rather than assuming int.
+	From Pierre Willard.
+
+	* breakpoint.c, breakpoint.h, buildsym.c, coffread.c, cplus-dem.c,
+	dbxread.c, dwarfread.c, elfread.c, infcmd.c, infrun.c, inftarg.c,
+	language.c, main.c, mem-break.c, mips-tdep.c, mipsread.c,
+	partial-stab.h, remote.c, saber.suppress, symfile.c, symtab.c,
+	valops.c, valprint.c, xcoffread.c, c-exp.y, m2-exp.y, blockframe.c,
+	command.c, core.c, exec.c, gdbtypes.h, parse.c, printcmd.c, solib.c,
+	sparc-xdep.c, utils.c, value.h, values.c:  Lint.
+
+Sat Mar 28 02:43:26 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (read_range_type):  Avoid int overflow by using unsigned.
+	* dbxread.c (dbx_symfile_init):  Remove bogus `lvalue cast'.
+	* language.h (enum exp_opcode):  Avoid forward enum def.
+	* main.c (define_command, user_defined_command):  Lint.
+	* mem-break.c, xcoffread.c:  Lint.
+	* solib.c:  Only #include <a.out.h> on SunOS, not SVR4.
+
+Sun Mar 29 14:16:22 1992  Per Bothner  (bothner@cygnus.com)
+
+	* Merged in latest RS6000 diffs from Metin G. Ozisik.
+	* xcoffsolib.c, xcoffsolib.h:  New files, from Metin.
+	* Various files: Changed #ifdef IBM6000 to IBM6000_HOST
+	or IBM6000_TARGET as (approximately) appropriate.
+
+Sat Mar 28 13:00:10 1992  Fred Fish  (fnf@cygnus.com)
+
+	* objfiles.h (OBJF_SYMS):  Define flag bit for objfile flags.
+	* symfile.c (symbol_file_add):  Use OBJF_SYMS to decide  whether
+	or not to try reading symbols from a mapped objfile.  Plugs memory
+	leak due to shared libraries generating no psymtabs or symtabs.
+
+Fri Mar 27 15:44:55 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (MAX_OF_C_TYPE, MIN_OF_C_TYPE):  Unused, remove.
+	* copying.awk:  Lint.  Make stronger warning at top of copying.c.
+	* elfread.c (elf_symtab_read):  Eliminate check of mainline.
+	* gdbtypes.c (smash_to_*):  Remove FIXME comments.
+	(lookup_pointer_type):  Add FIXME comment.
+	* main.c (set_history_size_command):  Disallow negative size.
+	* partial-stab.h:  Update copyright.
+	* rs6000-tdep.c (skip_trampoline_code):  Better comments.
+
+Wed Mar 25 10:45:38 1992  John Gilmore  (gnu at cygnus.com)
+
+	* main.c (set_history_size_command):  Negative size is error.
+	(Reported by Peggy Fieland.)
+
+Thu Mar 26 17:01:18 1992  Fred Fish  (fnf@cygnus.com)
+
+	* coffread.c (coff_symfile_init):  Update comment.
+	* dbxread.c (DBX_SYMFILE_INFO, DBX_TEXT_SECT, DBX_SYMCOUNT,
+	DBX_STRINGTAB, DBX_STRINGTAB_SIZE, DBX_SYMTAB_OFFSET):  Define
+	macros to access the dbx specific objfile information.
+	* dbxread.c (symfile_string_table, symfile_string_table_size):
+	Remove these local variables.
+	* dbxread.c (read_ofile_symtab, psymtab_to_symtab_1,
+	read_dbx_symtab):  Remove the stringtab and stringtab_size params
+	from the function prototypes, the function definition, and the
+	function calls.  These are now available via DBX_STRINGTAB and
+	DBX_STRINGTAB_SIZE using the objfile pointer.
+	* dbxread.c (dbx_symfile_read):  Relocate addr before using as
+	an arg to read_dbx_symtab.
+	* dbxread.c (dbx_symfile_read):  Remove code that free'd the
+	stringtab and the dbx specific per-objfile private info.
+	* dbxread.c (init_psymbol_list):  Remove symbol count from passed
+	args in prototype, function definition, and function calls.  It is
+	now available via the DBX_SYMCOUNT macro using the objfile
+	pointer.
+	* dbxread.c (dbx_symfile_read, dbx_symfile_init):  Remove the
+	local instance of struct dbx_symfile_info and replace with DBX_*
+	macros.
+	* dbxread.c (dbx_symfile_read):  Remove init's of now deleted
+	symfile_string_table and symfile_string_table_size.
+	* dbxread.c (dbx_symfile_finish):  Remove now obsolete free of
+	symfile_string_table.
+	* dbxread.c (init_psymbol_list):  Use DBX_SYMCOUNT.
+	* dbxread.c (dbx_psymtab_to_symtab):  Remove local stringtab and
+	stringtab size variables.  Remove all code that used to reread
+	the stringtab.
+	* objfiles.c (allocate_objfile):  Move calls to init_malloc()
+	to prior to any calls to mmalloc for the objfile specific heap.
+	* utils.c (init_malloc):  Document the requirement that for each
+	heap for which corruption checking is desired, that init_mmalloc
+	must be called prior to any mmalloc calls on the heap.
+
+Thu Mar 26 13:20:06 1992  Per Bothner  (bothner@cygnus.com)
+
+	* rs6000-pinsn.c:  Make dis-assembly output more like
+	other targets:  Don't print instruction in hex before
+	the assembly;  use print_address to print out jump
+	destinations.
+
+Wed Mar 25 16:52:35 1992  Per Bothner  (bothner@cygnus.com)
+
+	* c-exp.y, gdbtypes.h:  Add builtin_type_signed_char.
+	* cplus-dem.c:  Support "Sc" meaning "signed char".
+
+Wed Mar 25 15:21:44 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in:  fix iris/iris3.
+
+Wed Mar 25 14:55:48 1992  Per Bothner  (bothner@cygnus.com)
+
+	* command.c, main.c (various places):  Use ctype.h macros
+	(such as isupper(x)),  instead of hard-wiring in ASCII-isms
+	(such as (x >= 'A' && x <= 'Z')).
+	(There are still more of these in other files.)
+	* main.c (defined_command):  Lower-case the user's
+	new command before entering it.  Needed because
+	command lookup is case-insensitive (and also lower-cases).
+	(Based on Metin's earlier patch.)
+
+Tue Mar 24 23:27:01 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* config/irix4.mh: new file.
+
+Tue Mar 24 14:17:48 1992  Stu Grossman  (grossman@cygnus.com)
+
+	* infcmd.c (step_1):  Call disable_longjmp_breakpoint at the right
+	time.
+
+	* xm-mips.h:  Declare strdup for ultrix.
+
+	* mipsread.c (fixup_sigtramp):  Make sure that current_objfile is setup
+	when calling new_symbol.
+	* mips-tdep.c (mips_frame_chain):  Use symfile_objfile instead of
+	current_objfile.
+
+Tue Mar 24 13:26:25 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* config/rs6000.mh:  Update (for Fred's new mmalloc)
+	flags to disable use of GNU malloc/mmalloc.
+	* munch:  Change SYSV rule to allow .text before the label,
+	as well as after, to work for AIX.
+	* gdbtypes.h:  Minor clarifiction.
+
+Tue Mar 24 07:26:19 1992  Michael Tiemann  (tiemann@cygnus.com)
+
+	* buildsym.c (read_struct_type): Handle cretinous dbx symbol name
+	continuation in yet another place (between method declarations).
+
+Mon Mar 23 23:01:41 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* mips-tdep.c:  include symfile.h and objfiles.h to fix
+	compilation errors.
+
+Mon Mar 23 15:49:14 1992  Per Bothner  (bothner@cygnus.com)
+
+	* valops.c (value_struct_elt_for_reference):  Added 'offset'
+	parameter to handle multiple inheritance.
+	* eval.c, value.h:  Update accordingly.
+
+Fri Mar 20 17:43:27 1992  Fred Fish  (fnf@cygnus.com)
+
+	* objfiles.h: New file
+	* Makefile.in (HFILES):  Add objfiles.h
+	* blockframe.c:  Remove entry_scope_lowpc, entry_scope_highpc,
+	main_scope_lowpc, main_scope_highpc.
+	* blockframe.c, buildsym.c, coffread.c, dbxread.c, dwarfread.c,
+	elfread.c, gdbtypes.h, minsyms.c, mipsread.c, objfiles.c, solib.c,
+	source.c, symfile.c, symmisc.c, symtab.c, target.c, xcoffexec.c,
+	xcoffread.c, :  Include objfiles.h.
+	* tm-29k.h, tm-i386v.h, tm-merlin.h, tm-rs6000.h, tm-sun386.h,
+	tm-symmetry.h, tm-tahoe.h, tm-umax.h, tm-vax.h, m88k-tdep.c,
+	mips-tdep.c (FRAME_CHAIN): Renamed outside_startup_file to
+	inside_entry_file() and logic changed appropriately.
+	* blockframe.c (outside_startup_file):  Renamed to
+	inside_entry_file() and logic changed appropriately.
+	* blockframe.c (inside_main_scope):  Renamed to inside_main_func()
+	and logic changed to use per-objfile specific fields.
+	* blockframe.c (inside_entry_scope):  Renamed to
+	inside_entry_func() and logic changed to use per-objfile specific
+	fields.
+	* blockframe.c, buildsym.h, coffread.c, dwarfread.c, mipsread.c,
+	symfile.c, mips-tdep.c (startup_file_start, startup_file_end):
+	Remove extern decls.
+	* symfile.c, symfile.h (entry_point):  Remove extern decl.	
+	* coffread.c (coff_symfile_init):  Common entry point init code
+	moved to symfiles.c, call init_entry_point_info().
+	* coffread.c (complete_symtab):  Use new per-objfile entry info.
+	* mip-tdep.c (mips_frame_chain):  Use new per-objfile entry info.
+	* mipsread.c (parse_partial_symbols):  Use new per-objfile entry
+	info.
+	* dbxread.c (read_dbx_symtab):  Use new per-objfile entry info.
+	* defs.h (inside_entry_scope, outside_startup_file,
+	inside_main_scope):  Prototypes changed for renames to
+	inside_entry_func, inside_entry_file, inside_main_func,
+	respectively.
+	* symfile.c (syms_from_objfile):  Common entry point init code
+	moved to init_entry_point_info() and call init_entry_point_info().
+	* symfile.h (init_entry_point_info):  Include prototype.
+	* xcoffread.c (aixcoff_symfile_init):  Common entry point init code
+	moved to symfiles.c and call init_entry_point_info().
+	* dwarfread.c (entry_scope_lowpc, entry_scope_highpc,
+	main_scope_lowpc, main_scope_highpc):  Remove extern decls.
+	* dwarfread.c (read_func_scope, read_file_scope):  Use new per-
+	objfile entry info.
+	* frame.h (FRAME_CHAIN_VALID):  Provide default definition that
+	works for the majority of targets.
+	* tm-68k.h, tm-convex.h, tm-h8300.h, tm-i386v.h, tm-irix3.h,
+	tm-merlin.h, tm-mips.h, tm-pyr.h, tm-rs6000.h, tm-sparc.h,
+	tm-sun386.h, tm-tahoe.h, tm-umax.h, tm-vax.h (FRAME_CHAIN_VALID):
+	Use default definition in frame.h.
+	* frame.h (selected_frame_level):  Make decl extern.
+	* objfiles.c, symfile.c (current_objfile):  Moved to objfiles.c
+	* objfiles.c, symfile.c (symfile_objfile):  Moved to objfiles.c
+	* partial-stab.h:  Use new per-objfile entry info.
+	* symfile.h (struct objfile):  Removed, moved to objfiles.h.
+	* symfile.h, objfiles.h (allocate_objfile, free_objfile,
+	free_all_objfiles, iterate_over_objfiles, iterate_over_symtabs,
+	iterate_over_psymtabs, have_partial_symbols, have_full_symbols,
+	have_minimal_symbols):  Prototypes moved to objfiles.h.
+	* symfile.h, objfiles.h (ALL_OBJFILES, ALL_OBJFILES_SAFE):
+	Macros moved to objfiles.h.
+	* tm-h8300.h, tm-i386v4.h (FRAME_CHAIN_VALID_ALTERNATE): Define.
+
+Thu Mar 19 18:49:45 1992  Per Bothner  (bothner@cygnus.com)
+
+	More C++ improvements (pointers to members, qualified names).
+	* c-exp.y:  Support exp.type::name and exp->type::name
+	syntaxes.  (Unfortunately, doesn't work for static members.)
+	* c-exp.y, eval.c:   Make type::~type work better.
+	* eval.c (evaluate_subexp: OP_SCOPE):  Replace use of
+	value_static_field by value_struct_elt_for_reference.
+	* eval.c (evaluate_subexp):  Merge code for STRUCTOP_MEMBER
+	and STRUCTOP_MPTR; cast arg1 to domain-type of arg2.
+	* eval.c (evaluate_subexp):  Remove special case for UNOP_ADDR
+	for OP_SCOPE operand; no point in it now that we use lazy
+	reading of values, and use "reference to member" objects.
+	* gdbtypes.h:  Clarify comment.
+	* valops.c:  Change value_struct_elt_for_address to return
+	a reference (or variable), rather than a pointer.  Change
+	the name to value_struct_elt_for_reference to reflect this.
+	Returning a reference instead of a address provides a
+	generalization, since we can use the routine for both
+	class::name as well as &class::name.
+	Also, recurse to handle multiple inheritance properly.
+	* valprint.c:  Moved code to print pointer-to-members
+	to new function point_class_member.  This allows a
+	"reference-to-member" to be printed using the same code.
+	* valprint.c (type_print_varspec_prefix):  Avoid printing
+	"struct " for domains of class-member types.
+	* valops.c (search_struct_field):  Inline code for simplified
+	version of value_static_field (which can then be deleted).
+	* value.h:  Rename value_struct_elt_for_address to
+	value_struct_elt_for_reference.  Delete value_static_field.
+	* values.c:  Remove no longer used function value_static_field.
+
+Thu Mar 19 13:54:11 1992  Fred Fish  (fnf@cygnus.com)
+
+	* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
+	elfread.c (coff_symfile_finish):  Add function, prototype, and
+	add to the xxxx_sym_fns struct for each file type.  Also reformat
+	the xxxx_sym_fns vector to a standard format and add comments.
+	* coffread.c, mipsread.c, xcoffread.c, coffread.c, dbxread.c,
+	elfread.c (xxx_symfile_new_init, xxx_symfile_init, xxx_symfile_read):  
+	Pass pointer to struct objfile rather than pointer to sym_fns.
+	Change references inside each function accordingly.  Allocate any
+	symbol file specific info in the per-objfile memory region.
+	* dbxread.c (free_and_init_header_files):  Break function into
+	free_header_files(), called from dbx_symfile_finish(), and
+	init_header_files(), called from dbx_new_init().
+	* dbxread.c (dbx_new_init):  Move deallocation things to new
+	dbx_symfile_finish function.
+	* elfread.c (elf_new_init):  Call buildsym_new_init().
+	* objfiles.c (free_objfile): Call the appropriate symfile_finish()
+	routine for the objfile before deallocating other stuff.
+	* sparc-tdep.c (get_longjmp_target):  Cast target_read_memory arg.
+	* symfile.h:  Move struct sym_fns to before struct objfile def.
+	Add sym_finish function pointer and change prototypes of other
+	function pointers to reflect passing struct objfile pointer rather
+	than struct sym_fns pointer.
+	* symfile.c:  Remove now obsolete symtab_fns pointer.
+	* symfile.c (symfile_init):  Renamed to find_sym_fns, and now only
+	locates the correct sym_fns struct for the given objfile.
+	* symfile.c (syms_from_objfile, symbol_file_add):  Restructured
+	for better support of mapped symbol tables.
+	* symfile.c (symbol_file_command):  Remove obsolete code using
+	symfile_fns.
+	* symfile.h:  Remove duplicate declarations for symfile_objfile,
+	entry_point, and object_files.
+	* target.c (target_info):  Compare symfile_objfile to NULL.
+	* xcoffread.c (aixcoff_new_init):  Move deallocation stuff to
+	aixcoff_symfile_finish().
+
+Wed Mar 18 18:22:46 1992  Fred Fish  (fnf@cygnus.com)
+
+	* infrun.c (IN_SOLIB_TRAMPOLINE):  Add default definition.
+	* infrun.c (wait_for_inferior):  Use IN_SOLIB_TRAMPOLINE.
+	* tm-sysv4.h (IN_SOLIB_TRAMPOLINE): Add SVR4 definition.
+
+Wed Mar 18 15:51:15 1992  Per Bothner  (bothner@cygnus.com)
+
+	Some improvements to g++ debugging.
+	* symtab.c (list_symbols): demangle before pattern matching.
+	* symtab.c:  Other fixes to improve handing of operators.
+	* valprint.c (type_print_base):  Fix test for constructor.
+	* values.c (value_static_field):  Allow evaluation of
+	CLASS::METHOD, returning a function pointer.
+
+Wed Mar 18 08:39:52 1992  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll  4.4.6.
+	* exec.c (exec_file_command):  Add code to ignore optional args
+	passed in by file_command() for use in symbol_file_command().
+	* main.c (main):  Document -mapped and -readnow in help summary.
+	* objfiles.c (open_mapped_file):  Cosmetic change, arg renamed.
+	* objfiles.c (allocate_objfile):  Filename arg removed.  Changes
+	to get filename from bfd with bfd_get_filename().  Test mapto
+	against 0, not NULL.  Use mstrsave() to make copy of filename.
+	* remote-mm.c (mm_load):  Symbol_file_add() takes an additional
+	arg.
+	* remote-vx.c (vx_load_command, add_symbol_stub):
+	Symbol_file_add() takes an additional arg.
+	* solib.c (symbol_add_stub):  Symbol_file_add() takes an
+	additional arg.
+	* symfile.c (symfile_open):  Renamed to symfile_bfd_open and
+	changed to return a bfd not an objfile pointer.
+	* symfile.c (syms_from_objfile): Eliminate local copy of bfd.
+	* symfile.c (symbol_file_add):  Takes an additional arg (readnow).
+	Change to eliminate local bfd and use symfile_bfd_open() plus
+	allocate_objfile().  Add code to implement readnow option.
+	* symfile.c (symbol_file_command): Changes to option handling,
+	readnow functionality moved to symbol_file_add().
+	* symfile.c (symfile_init):  Eliminate local copy of bfd.
+	* symfile.c (add_symbol_file_command):  Changes to parse mapped
+	and readnow options.
+	* symfile.h (allocate_objfile):  Arg removed from prototype.
+	* symtab.h (symbol_file_add):  Arg added to prototype.
+	* xcoffexec.c (map_vmap):  Allocate_objfile() takes an additional
+	arg.
+
+Sat Mar 14 16:38:47 1992  Fred Fish  (fnf@cygnus.com)
+
+	* gmalloc.c, gmalloc.h mcheck.c mmap-alloc.c mmap-sbrk.c mtrace.c,
+	mtrace.awk, state.c, state.h:  Removed.
+	* .gdbinit: Add ../malloc, ../libiberty, and ../bfd to list of
+	directories searched for source files.
+	* Makefile.in (GNU_MALLOC, MALLOC_CFLAGS, MALLOCSRC): Removed
+	* Makefile.in (MMALLOC_DIR, MMALLOC_DEP, MMALLOC_LIB,
+	MMALLOC_DISABLE, MMALLOC_CHECK, MMALLOC_CFLAGS): Add
+	* Makefile.in (CFLAGS):  Replace MALLOC_CFLAGS with MMALLOC_CFLAGS.
+	* Makefile.in (CLIBS, CDEPS):  Add MMALLOC_LIB
+	* Makefile.in (ADD_FILES, ADD_DEPS):  Remove GNU_MALLOC.
+	* Makefile.in (SFILES_MAINDIR): Remove stat.c mmap-alloc.c, mmap-
+	sbrk.c
+	* Makefile.in (HFILES): Remove state.h
+	* Makefile.in (POSSLIBS_MAINDIR): Remove MALLOCSRC.
+	* Makefile.in (OBS): Remove state.o mmap-alloc.o mmap-sbrk.o
+	* Makefile.in (saber_gdb): Remove mcheck, mtrace.  Add MMALLOC_DIR.
+	* Makefile.in (clean): Remove all object files.
+	* c-exp.y:  Define malloc to xmalloc and realloc to xrealloc.
+	* cplus-dem.c: Remove prototypes definitions that are now done in
+	def.h.
+	* dbxread.c (throughout):  Change from using per-objfile
+	xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree.
+	* defs.h: Remove prototypes for mmap_* functions.  Add prototypes
+	for xmmalloc, xmrealloc, mfree, mmcheck, mmtrace, mmalloc_attach, 
+	mmalloc_detach, mmalloc_setkey, msavestring, and mstrsave, nomem.
+	* depend:  Remove dependencies for state.o, state.h.
+	* dwarfread.c: Add declaration for warning_pre_print.
+	* dwarfread.c (dwarfwarn):  Use warning_pre_print.
+	* dwarfread.c (throughout):  Change from using per-objfile
+	xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree.
+	* gdbtypes.c (lookup_fundamental_type):  Fix init_type calls to
+	use supplied objfile.
+	* i386-xdep.c (print_387_status): Change to use warning() rather
+	than printfs.
+	* i387-tdep.c (print_387_control_word):  Change to use warning()
+	rather than printfs.
+	* infrun.c (wait_for_inferior):  Remove unreachable abort() call
+	that some compilers grumble about.		
+	* language.c (throughout):  Add declaration for warning_pre_print
+	and using warning() instead of printfs.
+	* m2-exp.y:  Define malloc to xmalloc and realloc to xrealloc.
+	* main.c (main):  Add declaration for warning_pre_print and set it
+	similarly to error_pre_print.  Add declarations for
+	mapped_symbol_files and readnow_symbol_files.  Add appropriate
+	definitions to long_options[].
+	* minsyms.c:  Trivial fix to comment.
+	* objfiles.c (allocate_objfile):  Substantially rewritten for
+	using mapped symbol files.
+	* objfiles.c (throughout):  Change from using per-objfile
+	xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree.
+	* objfiles.c (open_mapped_file, mapped_to_address):  Add functions.
+	* source.c (throughout):  Change from using per-objfile
+	xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree.
+	* source.c (open_source_file):  Use mstrsave to save file name in
+	mapped symbol region for objfile.
+	* symfile.c:  Remove include for state.h.
+	include to local form.
+	* symfile.c (symbol_file_add_digested):  Remove.
+	* symfile.c (symbol_file_add):  Substantially rewritten for mapped
+	symbol files.
+	* symfile.h:  Remove malloc/xrealloc/xmalloc/xrealloc/free members
+	from objfile structure.  Add malloc descriptor pointer (md).
+	* symfile.h (OBJF_DUMPABLE):  Changed name to OBJF_MAPPED.
+	* symm-xdep.c (print_fpu_status):  Use warning() rather than
+	printfs.
+	* symmisc.c (free_symtab_block):  Now takes and uses current
+	objfile pointer.
+	* symmisc.c (throughout):  Change from using per-objfile
+	xmalloc/xrealloc/free functions to xmmalloc/xmrealloc/mfree.
+	* symtab.c (cplus_mangled_symbol):  Cast return value to avoid
+	Sun compiler grumblings when PTR is char *.
+	* symtab.c (lookup_symbol):  Cast return value of iterate_over_
+	msymbols() to correct pointer type.
+	* utils.c (warning_pre_print):  Initialize to "\nwarning: ".
+	* utils.c (fatal, fatal_dump_core):  Ensure that the fatal
+	error always starts on a line of it's own.
+	* utils.c (init_malloc, malloc_botch, xmalloc, xrealloc):
+	Rewrite for new mapped malloc package use.
+	* utils.c (mmalloc, mrealloc, mfree):  Stubs for configurations
+	that don't want to use the mapped malloc package; pass arguments
+	on to traditional malloc package functions.
+	* utils.c (nomem):  Add for fatal virtual memory exhausted aborts.
+	* utils.c (xmmalloc, xmrealloc, xmalloc, xrealloc):  Like mmalloc,
+	mrealloc, malloc, and realloc but get fatal error if runs out
+	of memory.
+	* utils.c (msavestring, mstrsave):  Save a string in a specific
+	mapped malloc region.
+	* utils.c (print_spaces):  Use xmalloc to get the buffer.
+	* xm-amix.h, xm-i386v4.h, xm-sun3os4.h, xm-sun4os4.h:  Add defines
+	for MMAP_BASE_ADDRESS and MMAP_INCREMENT.
+	* config/i386v4.mh:  Insignificant reorganization.
+
+Sat Mar 14 11:44:47 1992  Fred Fish  (fnf@cygnus.com)
+
+	* xcoffread.c:  Only enable compilation of debugging functions
+	if IBM6000 is defined.  Fails to compile otherwise.
+
+Fri Mar 13 15:51:11 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: pass MAKEINFO down on info.
+
+Fri Mar 13 12:56:36 1992  John Gilmore  (gnu at cygnus.com)
+
+	* mipsread.c (mipscoff_symfile_read):  Eliminate a lot of
+	useless code, including an lseek to an uninitialized variable.
+	Reported by Jim Williams <jimbo@wrs.com>.
+
+Thu Mar 12 11:56:46 1992  Per Bothner  (bothner@cygnus.com)
+
+	Merged in patches from metin@ibmpa.awdpa.ibm.com (Metin G.
+	Ozisik) (dated Fri, 6 Mar 92 17:51) for the rs6000.
+	* minsyms.c, symfile.c:  Changes that may be generally
+	applicable, but are #ifdef IBM6000 for now.
+	* rs6000-xdep.c:  Fixed typo in comment.
+	* rs6000-tdep.c:  Non-substatial changes.
+	* xoffread.c:  The main change here is addition of some
+	debugging functions.
+	* xoffexec.c: More changes.
+
+	* xcoffread.c:  Fixed two too-few-parameters bugs.
+
+	* solib.h, infrun.c, tm-rs6000.h:  Add a PID parameter
+	to SOLIB_CREATE_INFERIOR_HOOK macro.
+
+Sun Mar  8 21:17:48 1992  Fred Fish  (fnf@cygnus.com)
+
+	* symfile.h:  Add prototype for iterate_over_msymbols().
+	* symtab.c (cplus_mangled_symbol):  Add function.
+	* symtab.c (lookup_symbol):  Call cplus_mangled_symbol via
+	iterate_over_msymbols to find demangled C++ symbol.
+	* xcoffexec.c (relocate_minimal_symbol): Return meaningful
+	value to iterate_over_msymbols().
+	* xcoffexec.c (vmap_symtab):  Ignore return from iterate_over_
+	msymbols().
+
+Fri Mar  6 21:59:34 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: added check target.
+
+Thu Mar  5 23:56:01 1992  John Gilmore  (gnu at cygnus.com)
+
+	* ecoff.c:  Move to ../bfd/coff-msym.c.
+	* config/mt-*mips:  Remove ecoff.o from the configuration.
+	* remote.c ():  Add newline to initial +.
+	(remote_resume):  Mention how to cope with signals.
+	(remote_interrupt):  Add debug msg.
+	(remote-wait):  Implement new 'T' reply, which includes
+	status, PC, and FP all in a single short message.
+	(putpkt):  Add further debugging of packet acks.
+	* mipsread.c (fixup_symtab):  Also swap RFD's.
+	(parse_partial_symbols):  Avoid bug on unknown symbol types.
+	* Makefile.in (VERSION):  Roll to 4.4.5.
+	* mips-tdep.c (heuristic_proc_start):  Avoid long delays
+	for remote MIPS by limiting heuristic to 200 byte search.
+	(heuristic_proc_desc):  Byte-swapping.
+	(mips_print_register):  Cope with failure of
+	read_relative_register_raw_bytes.  Byte-swap integers for
+	printing.
+	* mips-pinsn.c (print_insn):  Byte-swap instruction.
+
+Thu Mar  5 12:32:09 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* config.sub configure.in config/mh-irix4
+	gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
+	gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
+	gdb/xm-irix4.h gdb/config/mt-irix3
+	gdb/config/mh-irix4 texinfo/configure.in:  Port to SGI Irix-4.x.
+
+Wed Mar  4 11:56:42 1992  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h, utils.c:  xrealloc takes PTR as first arg.
+	* defs.h:  Reword confusing comment about ANSI prototypes.
+	* defs.h:  Some minor whitespace changes.
+	* infrun.c (wait_for_inferior):  Compare int tmp to int 0,
+	not NULL, which can be (void *).
+	* tm-amix.h, tm-i386v4.h:  Add defines for setjmp/longjmp handling.
+	* tm-i386v.h (SP_ARG0):  Define
+	* xm-sysv4.h:  Back out of change for missing prototypes.
+	* i386-tdep.c (get_longjmp_target):  Add function.
+
+Wed Mar  4 05:46:11 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* Makefile.in: install man page too.
+
+Tue Mar  3 15:11:52 1992  Michael Tiemann  (tiemann@cygnus.com)
+
+	* All GDB files that #include defs.h: Removed stdio.h.
+	(defs.h): #include stdio.h.
+
+Mon Mar  2 23:00:12 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* gdbtypes.c (lookup_pointer_type): initialize the TYPE_LENGTH of
+	a ptype to reflect the setting of TARGET_PTR_BIT.  Set the
+	TYPE_FLAGS of a ptype to TYPE_FLAG_UNSIGNED.
+	* tm-h8300.h, h8300-tdep.c, remote-hms.c: personal checkpoint
+	* printcmd.c (print_address): if ADDR_BITS_REMOVE is defined, use
+	it before printing out the hex shape of an address.
+
+Sun Mar  1 17:41:09 1992  Per Bothner  (bothner@cygnus.com)
+
+	* rs6000-xdep.c (frame_initial_stack_address):  Move
+	code to set frame->cache_fsr into new separate function
+	frame_get_cacahe_fsr.  This allows fixing a fatal error.
+	* xcoffexec.c:  Turn previously suppressed error
+	message back on, after cleaning up BFD.
+
+	* breakpoint.c (breakpoint_re_set):  Removed (at least for now)
+	printing of blank line, since it cases printing of an
+	extra blank line.  Is this intended?  It does mess up
+	gdb test suite.
+	* defs.h:  Put back declarations of malloc and realloc,
+	but protected by #ifndef MALLOC_INCOMPATIBLE.
+	* objfiles.c:  Undo previous change:  Use malloc/realloc
+	for objfile malloc/realloc fields (but add a cast).
+	* xcoffexec.c:  Suppress an error message (for now).
+
+Sat Feb 29 14:43:02 1992  Per Bothner  (bothner@cygnus.com)
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Fri, 21 Feb 92 13:14:54 -0800]
+	* buildsym.c: Use smash_to_pointer_type() to handle forward type
+	references.
+	* xcoffread.c: Modifications to C_DECL storage class handling, and
+	introduction of an old smash_to_pointer_type() routine.
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Thu, 20 Feb 92 13:57:16 -0800]
+	* rs6000-xdep.c, rs6000-tdep.c, tm-rs6000.h: function_frame_info()
+	parameters have been modified.
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Thu, 20 Feb 92 10:10:05 -0800]
+	* rs6000-tdep.c: Before Feb 5 92, register_valid[] array was not used,
+	and fetch_inferior_registers() always fetched all the registers
+	resulting valid register values at hand all the time. Pushing a dummy
+	frame did not require validating all register values first. After
+	putting the above mechanism into action, we didn't have valid registers
+	values always ready. Thus, all registers need to be fetched before
+	pushing a dummy frame now.
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Thu, 13 Feb 92 16:22:44 -0800]
+	* rs6000-xdep.c: frame_initial_stack_address() function to calculate
+	the starting address (actual frame address) of a frame.
+	* rs6000-tdep.c: modifications to function_frame_info() to see if
+	function reserves a frame pointer register (alloca register)
+	* tm-rs6000.h: EXTRA_FRAME_INFO, FRAME_ARGS_ADDRESS and
+	FRAME_LOCALS_ADDRESS has been updated to support debugging of
+	functions with alloca() calls.
+
+Sun Mar  1 13:13:39 1992  Fred Fish  (fnf@cygnus.com)
+
+	* xm-sysv4.h:  Provide definitions/prototypes for host environment
+	functions for which no definitions or prototypes are provided in
+	any currently included gdb or host environment header files.
+	For SVR4, this currently includes malloc and realloc, which cannot
+	be portably prototyped in any gdb include file.
+
+Sat Feb 29 14:43:02 1992  Per Bothner  (bothner@cygnus.com)
+
+	* buildsym.h:  Remove obsolete variable file_stabs.
+
+	* Makefile.in:  Move place where configure merges in host-
+	and target-dependent fragments later, so the latter
+	can override (say) GNU_MALLOC.
+	* config/mh-rs6000:  Use system malloc.  Otherwise, I
+	ended up with *two* incompatible versions of malloc
+	(functions in libc would call the malloc in libc).
+	I assume this is a shared library problem.
+
+	* remote.c:  Fix (presumed) typo.
+	* objfiles.c:  Use xmalloc/xrealloc instead of
+	malloc/realloc (since the latter are no longer declared).
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Thu, 6 Feb 1992 10:22:02 -0800]
+	* rs6000-xdep.c: Improvements to fetch_inferior_registers() to
+	handle individual registers.
+	* tm-rs6000.h: Fix SAVED_PC_AFTER_CALL macro to handle pc value
+	correctly in case it wasn't cached yet. (A problem showed up
+	after fetching individual registers.)
+	* buildsym.c: Disable type_synonym_name's type name overwriting
+	in cases it is unnecesary. rs6000 portation doesn't use
+	type_synonym_name, and it used to nullify type names
+	* xcoffread.c: to handle g++'s typename abbreviation, fill in a
+	type's name as soon as space for that type is allocated.
+	* xcoffread.c: ignore a section's lineno information if it is
+	not `.text'. (In rs6000 bfd portation integration, skipping over
+	`.pad' sections are ignored since it was in machine independent
+	part of the code. Thus, a problem of fake sections with invalid
+	lineno information arised.)
+
+	Changes from metin@ibmpa.awdpa.ibm.com (Metin G. Ozisik)
+	[Mail dated Thu, 6 Feb 1992 13:26:22 -0800]
+	* rs6000-tdep.c: make function_frame_info() work whether or not
+	reading from a core file.
+	* tm-rs6000.h: Implementation of FRAME_FIND_SAVED_REGS macro.
+
+	* infrun.c. main.c, printcmd.c. symtab.c:
+	More changes from IBM for rs6000.
+
+
+Thu Feb 27 22:57:19 1992  Per Bothner  (bothner@cygnus.com)
+
+	* rs6k-opcode.h, tm-rs6000.h, xm-rs6000.h, rs6000-tdep.c,
+	rs6000-xdep.c, xcoffexec.c, xcoffread.c:
+	Merge in changes (mostly from IBM) for RS6000.
+	* breakpoint.c, buildsym.c, infptrace.c, stack.c, symtab.c:
+	More changes from IBM for RS6000.  These are in machine-
+	independent code, and probably could do with some cleaning
+	up.  The most questionable of these are #ifdef IBM6000.
+	* infrun.c, sparc-tdep.c: Pass a parameter (signal number)
+	to single_step() (for consistency with rs6000 and i860).
+	* utils.c:  Allow the 1st arg to xrealloc to be NULL
+	(in which case do malloc).  This removes the need for
+	some tests in xcoff code (and perhaps other places?).
+	* coffread.c: Removed variables last_source_file,
+	type_vector, and type_vector_length as these are now
+	defined by buildsym.[ch].
+	* defs.h:  Remove prototypes for malloc and realloc, since
+	these should only be used to implement xmalloc and xrealloc,
+	and they conflict with <stdlib.h> in AIX - where they
+	return void* even when __STDC__ isn't defined.  Sigh.
+	* munch:  Recognize *initialize* in data as well as text
+	(AIX uses data).  Also, incorporate a patch from Garrett
+	Wollman <wollman@uvm-gen.uvm.edu> to make the sed script
+	much more sensible, by only trying to match the name of
+	the initialize_foo function, and not the junk before it.
+	
+Thu Feb 27 20:07:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set_one):  Don't reset breakpoint
+	unless symbol table indicates that something has changed.
+
+Thu Feb 27 11:48:47 1992  John Gilmore  (gnu at cygnus.com)
+
+	* remote.c:  Make it work for embedded MIPS.  Increase buffer
+	size, and use throughout.  Round buffer size up if too many regs.
+	Support baud rate setting and try for an 8-bit path.  If
+	interrupted while waiting for target, send a ^C down the wire.
+	Avoid single-byte reads.
+	* tm-mips.h:  Add more embedded-system registers to REGISTER_NAMES
+	and NUM_REGS.
+	* mips-xdep.h:  Avoid the embedded regs when on Unix.
+
+	* mipsread.c:  Byte-swap the symbol table structures, using
+	routines from ecoff.c, to read a symbol table written in any
+	of the four possible byte orders.
+	* configure.in (mips-big-* target):  Same as Sony News.
+	* config/mt-bigmips, config/mt-littlemips:  Add ecoff.o.
+	* ecoff.c:  New file for symbol swapping routines.
+
+Thu Feb 27 09:26:38 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* breakpoint.c (all_breakpoints_info, breakpoint_1):  Add 'info
+	all-breakpoints' command.
+	* (get_number):  Allow users to enter negative breakpoint numbers.
+	* (breakpoint_1):  Reformat display of 'info break' to show new
+	fields.
+	* (create_longjmp_breakpoint, breakpoint_re_set,
+	breakpoint_re_set_one, enable/disable_longjmp_breakpoint),
+	symfile.c  (syms_from_objfile):  Re-do
+	insertion of longjmp breakpoints.  Move all code into
+	breakpoint_re_set, and call that instead of
+	create_longjmp_breakpoint in symfile.c.
+
+Thu Feb 27 06:11:05 1992  John Gilmore  (gnu at cygnus.com)
+
+	* breakpoint.h (ALL_BREAKPOINTS_SAFE):  Add.
+	* breakpoint.c (breakpoint_re_set):  Use ALL_BREAKPOINTS_SAFE.
+	* symtab.c (find_pc_symtab):  Handle having no objfiles.
+	* infcmd.c:  Fix comment.
+	* objfiles.c (free_all_objfiles):  Add.
+	* symfile.h (ALL_OBJFILES, ALL_OBJFILES_SAFE):  Add.
+	* symfile.c (symbol_file_command):  free all objfiles when
+	specifying a new symbol file.
+	(reread_symbols):  Stat the file name, don't fstat the descriptor.
+
+Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in, configure.in: removed traces of namesubdir,
+	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
+	  copyrights to '92, changed some from Cygnus to FSF.
+
+Tue Feb 25 19:31:19 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (end_psymtab):  Delete empty psymtabs.
+	* symfile.c (allocate_psymtab):  Recycle empty psymtabs.
+	* symfile.h (struct objfile):  Add free_psymtabs.
+
+Sat Feb 22 02:00:32 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to gdb-4.4.4.
+
+	* symfile.c (symbol_file_command):  strcmp => !strcmp.
+	* breakpoint.h:  Move prototypes to follow enum definition they need.
+	* breakpoint.c, infrun.c:  Lint.
+	* printcmd.c:  Use `enum enable' rather than `enum
+	display_status'.
+	* mipsread.c:  First pass at making it compile with the new
+	objfile changes.  Probably seriously broken still, but it
+	compiles.  FIXME.
+
+Sat Feb 22 00:56:39 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c, infcmd.c, breakpoint.c, main.c, symfile.c,
+	breakpoint.h, tm-sun4os4.h, tm-sparc.h, sparc-tdep.c, tm-mips.h,
+	mips-tdep.h, tm-sun3.h, tm-68k.h, m68k-tdep.h:  Add support for
+	stepping (and nexting) through longjmp().  Also, cleanup
+	breakpoint handling quite a bit by creating explicit breakpoint
+	types instead of using magic breakpoint numbers.
+	Makefile.in:  Update version to 4.4.3
+
+Sat Feb 22 00:08:50 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c, dwarfread.c, gdbtypes.c, inflow.c, main.c,
+	minsyms.c, printcmd.c, remote.c, saber.suppress:  Saberlint.
+	* symmisc.c, xcoffread.c:  Move debug functions to symmisc.c.
+
+	* xm-sun3os4.h, xm-sun4os4.h:  Enable HAVE_MMAP.
+
+	* minsyms.c (install_minimal_symbols):  Add bunches to any
+	existing minsyms in the objfile.  Avoid extra mallocation
+	by working directly in the obstack.  Remove ignored `mainline' parm.
+	* coffread.c, dbxread.c, elfread.c, mipsread.c, solib.c, symtab.h,
+	xcoffread.c:  Change all callers.
+	* FIXME:  We should be able to eliminate MAINLINE from all the
+	symbol readers now, with a small bit of work.
+
+	* valops.c, value.h:  Lint.
+	* remote-vx.c:  Add missing break; statement.  Bugfix by
+	Michael Sclafani, <sclafani@src.dec.com>.
+
+Fri Feb 21 17:29:54 1992  Fred Fish  (fnf at cygnus.com)
+
+	* Makefile.in (VERSION):  Update version to 4.4.2
+	* Makefile.in (SFILES_MAINDIR):  Add gdbtypes.c, state.c, objfiles.c,
+	minsyms.c, mmap-alloc.c, mmap-sbrk.c
+	* Makefile.in (HFILES):  Add gdbtypes.h, state.h, solib.h
+	* Makefile.in (OBS):  Add gdbtypes.o, state.o, objfiles.o, minsyms.o,
+	mmap-alloc.o, mmap-sbrk.o
+
+	* altos-xdep.c:  Minor whitespace change.
+	* am29k-tdep.c (examine_prologue):  Convert from misc function vector
+	use to new minimal symbol table use.
+	* arm-xdep.c (fetch_inferior_registers):  Document unused argument.
+	* arm-xdep.c (store_inferior_registers):  Returns void.
+	* blockframe.c (get_pc_function_start, find_pc_partial_function):
+	Convert from misc function vector use to new minimal symbol table use.
+	Remove find_pc_misc_function().  Ifdef out block_innermost_frame().
+	* breakpoint.c:  Add prototypes for local functions.
+	* breakpoint.c (catch_command_1):  Change to static and remove unused
+	local "pc".
+	* breakpoint.c (map_breakpoint_numbers):  Prototype arg "function".
+	* breakpoint.h:  Change function decls to prototype form.
+	* buildsym.c:  Add prototypes for local functions.
+	* buildsym.c:  Moved hashname() function here from dbxread.c.
+	* buildsym.c (dbx_lookup_type):  Cast args to xrealloc().
+	* buildsym.c:  Remove dbx_create_type(), uses changed to alloc_type().
+	* buildsym.c (dbx_alloc_type):  Change to static.
+	* buildsym.c (finish_block): Add objfile parameter.
+	* buildsym.c (misc):  Change symbol_obstack to objfile version.
+	* buildsym.c (make_blockvector): Change to static.
+	* buildsym.c (start_subfile):  Use strdup instead of obsavestring.
+	* buildsym.c (compare_line_numbers): Change to static, args are const,
+	cast args when used.
+	* buildsym.c (start_symtab):  Inline new_object_header_files() call.
+	* buildsym.c (patch_block_stabs):  Moved to this file from xcoffread
+	and made static.  Add objfile parameter.
+	* buildsym.c (end_symtab): Simplify code using line table size.
+	Realloc the linetable on the objfile symbol_obstack and copy there.
+	* buildsym.c (scan_file_globals):  Convert from misc function vector
+	use to new minimal symbol use.
+	* buildsym.c (define_symbol):  Add objfile parameter.  Make sure
+	strings get allocated in objfile's symbol_obstack.  Convert references
+	to builtin types to lookup_fundamental_type().
+	* buildsym.c (read_type):  Make static, add objfile parameter, convert
+	references to buildin types to lookup_fundamental_type().
+	* buildsym.c (read_struct_type):  Add objfile parameter.
+	* buildsym.c (read_array_type):  Make static, add objfile parameter.
+	* buildsym.c (read_enum_type):  Make static, add objfile parameter.
+	* buildsym.c (read_huge_number): Make static.
+	* buildsym.c (read_range_type): Make static, add objfile parameter,
+	convert references to buildin types to lookup_fundamental_type ().
+	* buildsym.c (read_args):  Make static, add objfile parameter.
+	* buildsym.h:  Convert function decl's to prototype form.
+	* c-exp.y:  Add prototypes for local functions, convert uses of misc
+	function vector to minimal symbol table.  Reformat all builtin type
+	initializations and pass a NULL objfile to init_type() for them.
+	* coffread.c:  Change context_stack ref's to coff_context_stack,
+	add local function prototypes.  Cast uses of xrealloc arg 1.
+	* coffread.c (coff_alloc_type):  Call alloc_type instead of  hand-
+	crafting a new type.
+	* coffread.c (add_symbol_to_list):  Change to coff_add_symbol_to_list.
+	* coffread.c (finish_block):  Change name to coff_finish_block.
+	* coffread.c (make_blockvector):  Add and use objfile parameter.
+	* coffread.c (record_line):  Change name to coff_record_line.
+	* coffread.c (start_symtab):  Change name to coff_start_symtab.
+	* coffread.c (end_symtab):  Change name to coff_end_symtab.
+	* coffread.c (record_misc_function):  Change name to record_minimal_
+	symbol and change to minimal symbol table use from misc func tbl.
+	* coffread.c (coff_symfile_read):  Convert from misc function vector
+	use to minimal symbol table use.
+	* coffread.c (hashname):  Remove; use common version in buildsym.c.
+	* coffread.c (decode_base_type):  Change references to builtin types
+	to calls to lookup_fundamental_type().
+	* coffread.c (read_struct_type):  Change name to coff_read_struct_type.
+	* coffread.c (read_enum_type):  Change name to coff_read_enum_type.
+	* command.c: Add prototypes for local functions.
+	* command.c (add_cmd):  Prototype the 'fun' parameter and use the
+	appropriate member of the function union for that type.
+	* command.c (add_abbrev_cmd):  Prototype the 'fun' parameter and
+	ifdef out the function since it isn't currently used.
+	* command.c (add_alias_cmd):  Pass correct function type to add_cmd.
+	* command.c (add_prefix_cmd):  Prototype the 'fun' parameter.
+	* command.c (add_abbrev_prefix_cmd):  Prototype the 'fun' parameter.
+	* command.c (help_cmd):  Compare function pointer to NULL.
+	* command.c (help_cmd_list):  Compare function pointer to NULL.
+	* command.c (lookup_cmd_1):  Use correct member of function union.
+	* command.c (undef_cmd_error):  Make static.
+	* command.c (complete_on_cmdlist):  Use correct member of func union.
+	* command.c (do_setshow_command):  Use correct member of func union.
+	* command.c (shell_escape):  Convert rindex use to strrchr.
+	* command.h (COMMAND_H):  Define if already included.
+	* command.h (cmd_list_element struct):  Change 'function' to a union
+	and prototype args.  Prototype completer function.
+	* command.h:  Convert decl's to prototype form.
+	* convex-xdep.c (store_inferior_registers):  Returns void.
+	* copying.c:  Prototype local functions.
+	* coredep.c:  Minor whitespace change.
+	* cplus-dem.c:  Remove hack to use BSD equivalents of mem* and str*.
+	* cplus-dem.c:  Prototype local functions.
+	* dbxread.c (hashname):  Remove; moved to buildsym.c.
+	* dbxread.c (free_and_init_header_files):  Make static.
+	* dbxread.c:  Add prototypes for local functions.
+	* dbxread.c (new_object_header_files):  Remove; inlined usages.
+	* dbxread.c (xrealloc usages):  Cast args.
+	* dbxread.c (record_misc_function):  Change to record_minimal_symbol
+	and change usages accordingly.
+	* dbxread.c (static_psymbols usages):  Change to use per-objfile copy.
+	* dbxread.c (xmalloc usages):  Use per-objfile copy when appropriate.
+	* dbxread.c (dbx_next_symbol_text):  Make static.
+	* dbxread.c (init_psymbol_list):  Convert to use per-objfile data.
+	* dbxread.c (init_bincl_list):  Add and use objfile parameter.
+	* dbxread.c (free_bincl_list):  Add and use objfile parameter.
+	* dbxread.c (compare_psymbols):  Remove; use common symfile.c version.
+	* dbxread.c (end_psymtab):  Convert to use per-objfile data.
+	* dwarfread.c (DEFUN/EXFUN):  Remove all usages.  Use PARAMS for
+	prototypes.
+	* dwarfread.c (record_misc_function):  Change name to record_minimal_
+	symbol and use minimal symbol table throughout.
+	* dwarfread.c (compare_psymbols):  Remove; use common symtab.c version.
+	* dwarfread.c:  Convert all references to builtin types to use the new
+	lookup_fundamental_type function.
+	* dwarfread.c (read_enumeration):  Add and use objfile parameter.
+	* elfread.c (DEFUN/EXFUN):  Remove all usages.  Use PARAMS for proto-
+	types.
+	* elfread.c (record_misc_function):  Convert to use record_minimal_
+	symbol.
+	* elfread.c (elf_symtab_read):  Add objfile parameter.
+	* eval.c:  Add prototypes for local functions and move some decls
+	around to accomodate prototypes.
+	* expprint.c:  Add prototypes for local functions.  Change references
+	to misc function vector to minimal symbol table.
+	* findvar.c (read_memory usages):  Cast args.
+	* gdbtypes.h:  New file, type info from symfile.h and symtab.h.
+	* gmalloc.c:  Use NOARGS where prototypes used hardwired void.
+	* gmalloc.c (BLOCKSIZE):  Constant to be shifted is unsigned.
+	* gmalloc.h:  Use NOARGS where prototypes used hardwired void.
+	* gould-xdep.c:  Minor whitespace change.
+	* hp300ux-xdep.c (fetch_inferior_registers):  Remove unused regno var.
+	* hp300ux-xdep.c (store_inferior_registers):  Returns void.
+	* hp300ux-xdep.c (fetch_core_registers):  Takes unused arg reg_addr.
+	* i386-stub.c: Add prototypes, change "volatile" to NORETURN.
+	* i386-tdep.c: Add prototypes for local functions.
+	* i386-tdep.c (codestream_fill, codestream_seek, codestream_read,
+	i386_get_frame_setup, i386_skip_prologue): Explicitly declare params
+	that defaulted to int.
+	* i386-tdep.c (i386_follow_jump, i386_frame_find_saved_regs,
+	i386_push_dummy_frame):	Returns void.
+	* i386-xdep.c (i386_register_u_addr):  Declare params that default to
+	int and explicitly declare return type as int.
+	* i387-tdep.c:  Minor formatting changes.
+	* i960-tdep.c (leafproc_return):  Convert from misc function vector
+	use to minimal symbol table use.
+	* infcmd.c:  Add prototypes for local functions.
+	* infcmd.c (continue_command, until_next_command, until_command,
+	path_info, path_command):  Make static.
+	* infcmd.c (step_1, until_next_command):  Convert from misc func
+	vector to minimal symbol table use.
+	* inflow.c:  Add prototypes for local functions.
+	* infptrace.c (store_inferior_registers):  Returns void, not int.
+	* language.c (_initialize_language):  Use proper member of function
+	union.
+	* m2-exp.y:  Add prototypes for local functions, convert misc function
+	vector uses to minimal symbol table uses.
+	* m2-exp.y (make_qualname, yyerror):  Make static.
+	* m2-exp.y (_initialize_m2_exp):  Call init_types with NULL objfile.
+	* m68k-pinsn.c:  Add prototypes for local functions.
+	* m68k-pinsn.c (print_insn):  Cast args to read_memory.
+	* m68k-pinsn.c (fetch_arg):  Make parameter 'code' and int.
+	* m68k-stub.c:  Add prototypes.
+	* m88k-pinsn.c (sprint_address):  Convert from misc function vector
+	use to minimal symbol table use.
+	* m88k-xdep.c (fetch_inferior_registers):  Takes an unused parameter.
+	* m88k-xdep.c (store_inferior_registers):  Returns void.
+	* mach386-xdep.c (fetch_inferior_registers):  Takes an unused param.
+	* mach386-xdep.c (store_inferior_registers):  Returns void.
+	* mach386-xdep.c (fetch_core_registers):  Takes an unused parameter.
+	* main.c:  Add prototypes for local functions.
+	* main.c (return_to_top_level):  Is type NORETURN (volatile).  Cast
+	longjmp() result to (NORETURN void).
+	* main.c (catch_errors):  Prototype the 'func' parameter.
+	* main.c (disconnect, stop_sig, do_nothin, float_handler):
+	Takes an unused arg.
+	* main.c (execute_command):  Call the right member of the func union.
+	* main.c (command_loop_marker, symbol_completion_function,
+	command_loop):  Make static.
+	* main.c (command_line_input):  Make linelength unsigned, cast arg
+	to command_line_input().
+	* main.c (add_info, add_com):  Prototype the 'fun' parameter.
+	* main.c (initialize_main):  Call right member of function union.
+	* mcheck.c (NOARGS):  Change hardwired void in prototypes to NOARGS.
+	* mem-break.c:  Include symtab.h
+	* mips-xdep.c (fetch_inferior_registers):  Takes unused param.
+	* mips-xdep.c (store_inferior_registers):  Returns void.
+	* mipsread.c (mipscoff_symfile_read):  Change from misc function vector
+	use to minimal symbol table use.
+	* mipsread.c (symbol_obstack usages):  Convert all to use per-objfile
+	version.
+	* mipsread.c (make_type):  Remove, convert usages to init_type.
+	* mipsread.c (_initialize_mipsread):  Call init_type with NULL objfile.
+	* nindy-tdep.c (nindy_frame_chain_valid):  Convert from misc function
+	vector use to minimal symbol table use.
+	* parse.c:  Add prototypes for local functions.
+	* parse.c (xrealloc usages):  Cast args.
+	* parse.c (prefixify_expression, length_of_subexp):  Make static.
+	* parser-defs.h (PARSER_DEFS_H):  Define when first included.
+	* parser-defs.h:  Convert function decls to prototype form.
+	* partial-stab.h:  Convert from misc function vector use to new minimal
+	symbol table use.
+	* partial-stab.h (global_psymbols, static_psymbols usages):  Reference
+	the per-objfile copies.
+	* printcmd.c:  Add prototypes for local functions.  Move some struct
+	definitions around to accomodate prototypes.
+	* printcmd.c (decode_format):  Make static, change args oformat and
+	osize to int from char.
+	* printcmd.c (print_formatted):  Change 'format' and 'size' to int.
+	* printcmd.c (print_scalar_formatted):  Change arg 'format' to int.
+	* printcmd.c (print_address_symbolic):  Convert from misc function
+	vector use to minimal symbol table use.
+	* printcmd.c (address_info):  Convert from misc function vector use
+	to minimal symbol table use.
+	* printcmd.c (delete_display, enable_display, disable_display_command):
+	Make static.
+	* procfs.c (EXFUN/DEFUN):  Remove all usages, convert to PARAMS.
+	* procfs.c (fetch_core_registers):  Add unused param reg_addr.
+	* pyr-xdep.c (fetch_inferior_registers):  Add unused param regno.
+	* pyr-xdep.c (store_inferior_registers):  Returns void.
+	* remote-mm.c (mm_load):  symbol_file_add return value unused.
+	* remote-nindy.c:  Minor format change.
+	* remote-vx.c (vx_load_command):  symbol_file_add result unused.
+	* rs6000-xdep.c (fetch_inferior_registers):  Add unused param regno.
+	* rs6000-xdep.c (store_inferior_registers):  Returns void.
+	* rs6000-xdep.c (fetch_core_registers):  add unused param reg_addr
+	* rs6000-xdep.c (aixcoff_relocate_symtab):  Convert from misc function
+	vector use to minimal symbol table use.
+	* solib.c:  Add prototypes for local functions.
+	* solib.c (solib_add_common_symbols, locate_base):  Convert from misc
+	function vector use to minimal symbol table use.
+	* solib.c (EXFUN/DEFUN):  Remove all usages, convert to PARAMS.
+	* solib.c (find_solib, shared_library_command):  Make static
+	* solib.c (read_memory, write_memory usages):  Cast args.
+	* solib.c (special_symbol_handling):  Add function
+	* source.c:  Add prototypes for local functions.
+	* source.c (select_source_symtab):  Convert to scan objfiles.
+	* source.c (open_source_file):  Make static.
+	* source.c (xrealloc usages):  Cast args.
+	* source.c (source_line_charpos):  ifdef out, unused.
+	* source.c (get_filename_and_charpos):  Make static.
+	* stack.c:  Add prototypes for local functions.
+	* stack.c (print_frame_info, frame_info):  Convert from misc function
+	vector use to minimal symbol table use.
+	* symfile.c:  Add prototypes for local functions.
+	* symfile.c (compare_symbols):  Make args const PTR's.
+	* symfile.c (compare_psymbols, sort_pst_symbols) add.
+	* symfile.c (sort_all_symtab_syms):  Scan objfile list.
+	* symfile.c (obsavestring):  Add objfile parameter.
+	* symfile.c (init_misc_bunches, prim_record_misc_function,
+	compare_misc_functions, discard_misc_bunches, condense_misc_bunches,
+	sort_misc_function_vector, compact_misc_function_vector): Remove
+	* symfile.c (symbol_file_add_digested):  Add function.
+	* symfile.c (symbol_file_add):  Returns struct objfile *.
+	* symfile.c (symbol_file_command):  Modify for state file use.
+	* symfile.c (symfile_open):  Add parameter "dumpable".
+	* symfile.c (allocate_objfile, free_objfile):  Moved to objfiles.c
+	* symfile.c (load_command, add_symbol_file_command):  Make static.
+	* symfile.c (fill_in_vptr_fieldno):  Moved to gdbtypes.c
+	* symfile.c (rindex usages):  Converted to strrchr.
+	* symfile.c (allocate_psymtab):  New
+	* symfile.c (free_named_symtabs):  Ifdef out code that needs to be
+	converted to minimal symbol table usage, but no obvious conversion.
+	* symfile.c (free_all_symtabs):  Remove.
+	* symfile.c (_initialize_symfile):  Use per-objfile info.
+	* symfile.h:  Rework the objfile structure to add per-objfile data
+	objects (psymbol_obstack, symbol_obstack, type_obstack,
+	global_psymbols, static_psymbols, msymbols, minimal_symbol_count,
+	fundamental_types, malloc, realloc, free, xmalloc, xrealloc, etc).
+	Add prototypes to function declarations.
+	* symm-tdep.c (symmetry_extract_return_value):  Convert from misc
+	function vector usage to minimal symbol table usage.
+	* symmisc.c (DEV_TTY):  Define if not defined.
+	* symmisc.c:  Add local function prototypes.
+	* symmisc.c (dump_objfile, dump_msymbols, dump-symtab, print_syms,
+	printpsyms_command, print_objfiles, print_objfiles_command):
+	Rework to use iterate_over_*
+	* symtab.c:  Add prototypes for local functions.
+	* symtab.c (lookup_symtab_1):  Convert to look through objfiles.
+	* symtab.c (lookup_partial_symtab):  Scan through objfiles.
+	* symtab.c (lookup_primitive_typename, lookup_typename, lookup_
+	unsigned_typename, lookup_struct, lookup_union, lookup_enum,
+	lookup_template_type, lookup_struct_elt_type, lookup_pointer_type,
+	lookup_reference_type, lookup_member_type, allocate_stub_method,
+	check_stub_method, create_array_type, smash_to_member_type,):
+	Moved to gdbtypes.c
+	* symtab.c (lookup_symbol):  Some args are const.
+	* symtab.h: All type related defs and structs moved to gdbtypes.h
+	* symtab.h: Convert decls to prototypes.
+	* target.c (noprocess):  Make static.
+	* target.h:  Change decl's to prototypes.
+	* tm-sunos.h: (CLEAR_SOLIB, SOLIB_ADD, SOLIB_CREATE_INFERIOR_HOOK,
+	DISABLE_UNSETTABLE_BREAK) Moved to solib.h.
+	* utils.c (_initialize_utils):  Use correct member of function union.
+	* valarith.c:  include gdbtypes.h
+	* valops.c: include gdbtypes.h, add prototypes for local functions.
+	* valops.c (value_push, value_arg_push, find_function_addr):
+	Make static.
+	* valops.c (value_string):  Convert from misc function vector use
+	to minimal symbol table use.
+	* valops.c (check_field_in):  Make arg const.
+	* valprint.c:  Add prototypes for local functions.
+	* valprint.c (print_string):  Make static
+	* valprint.c (value_print, val_print_fields, val_print): Make arg int.
+	* values.c:  Add prototypes for local functions.
+	* values.c (value_headof):  Convert from misc function vector to
+	minimal symbol table.
+	* xcoffexec.c:  Add prototypes for local functions.
+	* xcoffexec.c (exec_close, file_command, add_to_section_table):
+	Make static.
+	* xcoffexec.c (relocate_minimal_symbol):  Add.
+	* xcoffread.c (patch_block_stabs):  Moved to buildsyms.c.
+	* xcoffread.c: Add prototypes for local functions.
+	* xcoffread.c (sort_syms):  Convert to scan objfiles.
+	* xcoffread.c (read_xcoff_symtab):  Make static.
+	* xcoffread.c (various):  Replace references to builtin types with
+	calls to lookup_fundamental_type.  Replace references to symbol_obstack
+	and psymbol_obstack with pointers to the per-objfile copies.
+	* xcoffread.c (dump_linetable, dump_type, dump_symbol, dump_namespace,
+	dump_block, dump_blockvector, dump_last_symtab, dump_symtabs):
+	Make static.
+	* xcoffread.c (init_stringtab):  Add objfile parameter.
+	* gdbtypes.c: New file
+	* minsyms.c: New file
+	* mmap-alloc.c: New file
+	* mmap-sbrk.c: New file
+	* objfiles.c: New file
+	* state.c: New file
+	* state.h: New file
+
+Fri Feb 21 17:29:54 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Check in Fred Fish's changes in these modules.  Fred
+	will make ChangeLog entries for all of them.  Update VERSION
+	to 4.4.2.
+
+Thu Feb 20 18:10:17 1992  Fred Fish  (fnf at cygnus.com)
+
+	* tm-sparc.h, tm-sysv4.h, solib.h:  Move shared lib definitions
+	into solib.h.
+	* sparc-pinsn.c, sparc-tdep.c, standalone.c, sun3-xdep.c,
+	sun386-xdep.c, symm-xdep.c, target.c, ultra3-xdep.c, utils.c,
+	value.h: Prototypes for static functions; lint.
+	* gdbtypes.h:  Empty file to ease transition.
+
+Thu Feb 20 16:43:13 1992  Fred Fish  (fnf at cygnus.com)
+
+	* environ.h, expression.h, frame.h, gdbcmd.h, gdbcore.h,
+	inferior.h, language.h, signame.h, target.h, terminal.h, 
+	tm-68k.h, tm-i386v.h, tm-sparc.h, tm-sun386.h, tm-symmetry.h,
+	xm-i386v.h, xm-sparc.h: Prototypes for all external functions.
+	Lint.
+	* core.c, exec.c, infrun.c, inftarg.c, language.c, remote.c,
+	signame.c, sparc-xdep.c: Prototypes for all static functions.
+	Lint.
+	* core.c, eval.c, exec.c, inftarg.c, remote-adapt.c, remote-eb.c,
+	remote-hms.c, remote-mm.c, remote-nindy.c, remote-vx.c, remote.c,
+	target.c, target.h, valarith.c, valops.c, value.h, xcoffexec.c:
+	Remove to_call_function and target_call_function, since it
+	always calls the same thing (call_function_by_hand).
+	* core.c, exec.c, solib.c:  Rename target_ops sections =>
+	to_sections, etc.
+	* infcmd.c, inflow.c, infptrace.c, infrun.c, main.c, target.c,
+	target.h:  target_kill takes no args.
+	* language.c (language_info):  Scaffolding to allow briefer
+	messages when the current language changes.  FIXME.
+	* xm-amix.h, xm-i386v4.h, xm-stratus.h: Define NORETURN to avoid
+	complaints about volatile functions.
+	* xm-sysv4.h (HAVE_MMAP):  Define.
+
+Thu Feb 20 09:04:18 1992  Fred Fish  (fnf at cygnus.com)
+
+	* defs.h:  Include ansidecl.h and PARAMS macro.  Use PARAMS
+	to make prototypes for all functions declared here.
+	* cplus-dem.c:  Avoid declaring xmalloc and xrealloc.
+	* c-exp.y:  Rename SIGNED, OR, and AND to avoid conflict.
+	* environ.c:  Include <stdio.h> before defs.h.  Minor cleanup.
+	* ieee-float.h:  Use PARAMS for prototypes; make some params const.
+	* ieee-float.c, valarith.c:  Include <stdio.h>.  Lint.  b*=>mem*.
+	* m2-exp.y:  Remove unused CONST; Rename OR and AND.
+	* utils.c:  Avoid declaring malloc and realloc.  Lint.
+	(request_quit):  Accept signal-number parameter.
+
+Mon Feb 17 07:13:27 1992  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (process_dies):  Add case to handle TAG_pointer_type
+	DIE's.  Add new function read_tag_pointer_type() to read them.
+
+	* dwarfread.c (dwarf_read_array_type, read_subroutine_type):
+	When creating a new user defined type, check to see if a partial
+	type already exists, and if so, bash it to fit.
+
+Fri Feb 14 19:00:17 1992  John Gilmore  (gnu at cygnus.com)
+
+	* coffread.c (decode_base_type):  Pass long, not union.
+	Fix by Eric Valette, ev@chorus.fr.
+
+Thu Feb 13 17:14:28 1992  Fred Fish  (fnf at cygnus.com)
+
+	* elfread.c (elf_symtab_read):  Fix code to correctly track
+	changes in bfd for absolute symbols.
+
+Thu Feb 13 12:43:29 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* xm-vaxbsd.h:  Close off comment.
+
+Thu Feb 13 07:45:19 1992  Fred Fish  (fnf at cygnus.com)
+
+	* xm-sysv4.h:  Define NEED_POSIX_SETPGID.
+
+Fri Feb  7 11:51:12 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mips-tdep.c (mips_print_registers):  Print correct register
+	number for double pseudo-registers.
+
+Fri Feb  7 07:56:05 1992  John Gilmore  (gnu at cygnus.com)
+
+	* buildsym.c (read_struct_type):  Avoid double-bump of parse ptr
+	in the op$::OPERATOR. case.  From Steven McCanne,
+	<mccanne@horse.ee.lbl.gov>.
+
+	* exec.c (set_section_name):  Pass arg to exec_files_info;
+	only call it if interactive.  From Francis Kauth <fk@tv.tv.tek.com>.
+
+Thu Feb  6 17:41:32 1992  John Gilmore  (gnu at cygnus.com)
+
+	* main.c (print_gdb_version):  Copyright msg: only this year.
+	(cd_command):  Avoid changing current_directory on error.
+
+Thu Feb  6 15:14:01 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mipsread.c (parse_partial_symbols):  Handle dependencies
+	between partial symbol tables (when not doing stabs-in-ecoff).
+	(This used to be handled by parse_fdr, but parse_fdr was
+	incompatible with handling stabs-in-ecoff, so the code
+	was re-written to not use parse_fdr.  Unfortunately,
+	the logic to handle dependencies was overlooked.)
+
+Thu Feb  6 11:51:39 1992  Steve Chamberlain  (sac at rtl.cygnus.com)
+
+	* coffread.c (read_enum_type): Use the size of a target int when
+	describing enum.
+	* defs.h: added new #define for TARGET_PTR_BIT, defaults to size
+	of target int.
+	* h8300-tdep.c, remote-hms.c, tm-h8300.h: too many changes to count
+	* symtab.c (lookup_reference_type, lookup_ptr_type): use
+	TARGET_PTR_BIT to determine size of a pointer
+	* values.c (unpack_long): when unpacking a REF or a PTR don't
+	assume the size of the type.
+
+Wed Feb  5 22:29:59 1992  John Gilmore  (gnu at cygnus.com)
+
+	* mipsread.c (parse_symbol):  Avoid clobbering enum pointer when
+	looking at its members.  Improve guess between struct and union,
+	only assuming union if multiple members have offsets of zero.
+
+Tue Feb  4 18:05:44 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mipsread.c:  Use (FP0_REGNUM-32) instead of magic number 6.
+	(This is just for clarity - and one day permitting us to
+	 change FP0_REGNUM from 38 to 32, which would make more sense.)
+	* tm-mips.h:  Added STAB_REG_TO_REGNUM macro, so that
+	register numbers in stabs-in-ecoff get handled correctly.
+
+Sat Feb  1 04:45:10 1992  Stu Grossman  (grossman at cygnus.com)
+
+ 	* xm-vax.h, xm-vaxult.h, xm-vaxbsd.h, config/mh-vaxult,
+	config/mh-vaxbsd, configure.in:  Split up config stuff for Vaxen
+	into BSD and Ultrix.
+
+Sat Feb  1 04:39:41 1992  John Gilmore  (gnu at cygnus.com)
+
+	* dbxread.c (dbx_symfile_init):  Call malloc, not xmalloc.
+
+Sat Feb  1 04:15:41 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Increment version to 4.4.1.
+	* main.c (print_gdb_version):  Update copyright notice.
+
+Sat Feb  1 01:43:11 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mipsread.c:  Prepend "struct " to the names of structure
+	types, and similarly for enums and unions.  (This used
+	to be done, but got lost in the re-write to "guess" the
+	difference between enum/struct/union.)
+	Also, guess that a tag is an enum if the first member
+	has type btNil.
+
+Fri Jan 31 21:45:51 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* xm-vax.h:  #ifndef ultrix around #include of endian.h and
+	limits.h (sigh).
+
+Fri Jan 31 00:05:01 1992  John Gilmore  (gnu at cygnus.com)
+
+	* Projects:  Patching executables is done.
+	* Makefile.in (VERSION):  Roll to gdb-4.4.
+	* README, WHATS.NEW:  Update for gdb-4.4.
+
+	* symfile.c (reread_symbols):  Whenever we reread one object
+	file's symbols, we must restart the scan, because the object_files
+	chain has been permuted.
+
+	* exec.c (exec_files_info):  Split out into print_section_info.
+	Print BFD filename of each section if it's not the default one.
+	* core.c (core_files_info):  Call print_section_info.
+
+	* xm-vax.h:  Include a few system header files whose definitions
+	must precede defs.h.
+	* language.c, language.h:  Make some things const.
+	* expression.h, main.c:  const spreads like ooze.
+
+	* mem-break.c (break_insn, break_insn_size):  Use unsigned chars,
+	since BREAKPOINT values can be >0x80.
+
+Thu Jan 30 17:21:14 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c, xm-i386sco.h:  SCO needs to use setpgid().
+
+Thu Jan 30 01:04:23 1992  John Gilmore  (gnu at cygnus.com)
+
+	* sparc-pinsn.c:  Remove kludge for preferring architectures.
+	Remove #ifdef's for SORT_NEEDED.  We need to sort the table, now
+	and forever.  Add `add' instruction to the set that get checked
+	for a preceding `sethi' in order to print an absolute address.
+	Corresponding changes in ../include/opcode/sparc.h needed
+	to eliminate garbage instructions.
+
+Wed Jan 29 19:24:34 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mipsread.c (parse_partial_symbols):  Make sure partial
+	symbols are created for external symbols (as used to be
+	the case).  This is a bit of a pain with the mips-coff.
+	It uses a table which points to all of the external
+	symbols belonging to a particular FDR or psymtab.
+	Once we've generated this table, we might as well save
+	it, and then use it in psymtab_to_symtab_1 to find
+	the symbols to pass to parse_external().
+	* symfile.c,  symfile.c:  New function start_psymtab_common
+	to share the common parts of allocating a new psymtab
+	for dbxread, mipsread (and later dwarfread).  Its code
+	was pulled out from start_psymtab in dbxread.c.
+	* dbxread.c (start_psymtab):  Use start_psymtab_common().
+
+	* valprint.c (val_print):  If there is an error when trying
+	to print a string, check to see if there really is a problem
+	by reading just one character.  If that works, assume
+	things are ok.
+
+Wed Jan 29 18:58:43 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-pinsn.c (compare_opcodes):  Make it prefer v6, v7,
+	cypress, v8 mnemonics in that order.
+
+Tue Jan 28 17:32:13 1992  Per Bothner  (bothner at cygnus.com)
+
+	* sparc-pinsn.c:  Put the qsort() back in.
+
+Mon Jan 27 18:51:03 1992  John Gilmore  (gnu at cygnus.com)
+
+	* findvar.c (read_register, write_register):  Handle machines
+	where REGISTER_TYPE is not the same size as "int".
+
+	Handle debug symbols in dynamically loaded (relocated) code:
+
+	* dbxread.c (read_ofile_symtab):  Fix up N_CATCH better.  Pass
+	offset to process_one_symbol.
+	(process_one_symbol):  Take new offset parameter.  Add it into
+	appropriate symbol types to relocate symbols to loaded addresses.
+	Handle all possible symbol types, and complain() about types that
+	we don't expect to see.
+	* mipsread.c (psymtab_to_symtab_1):  Pass offset of zero to
+	process_one_symbol (FIXME, should pass real offset).
+
+	Misc bugfixes:
+
+	* breakpoint.c (resolve_sal_pc):  Split out code to resolve a
+	sal's PC value.
+	(set_breakpoint, break_command_1, until_break_command,
+	catch_command_1, breakpoint_re_set_one):  Use it.
+	* symtab.h (resolve_sal_pc):  Declare.
+	* infcmd.c (jump_command):  Use resolve_sal_pc.
+
+	* source.c (list_command):  Shorten "FILE, line N" to "FILE:N".
+
+	* putenv.c (putenv):  Avoid unportably casting pointers to unsigneds.
+
+	* c-exp.y (yylex):  `this' and `template' are only tokens in C++.
+
+	* xm-convex.h, xm-hp300bsd.h, xm-isi.h, xm-merlin.h, xm-news.h,
+	xm-np1.h, xm-pn.h, xm-pyr.h, xm-rtbsd.h, xm-symmetry.h, xm-umax.h:
+	Remove MISSING_VPRINTF declaration, and superfluous "kgdb" defines.
+
+Mon Jan 27 15:46:21 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (process_one_symbol):  Make a first cut at handling
+	symbol tables generated by Sun's acc.  (#ifdef'd out, FIXME.)
+
+	* symtab.c (find_pc_line):  Fix stepping into and out of #included
+	files.
+
+Mon Jan 27 13:00:55 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (OPCODES):  Remove OPCODES defs and refs.  There is
+	no longer any need to copy ../include/opcode/* into gdb.
+
+Mon Jan 27 12:30:38 1992  John Gilmore  (gnu at cygnus.com)
+
+	* ChangeLog, ChangeLog-9091:  Split ChangeLog at 1992.
+
+Sun Jan 26 19:05:40 1992  Per Bothner  (bothner at cygnus.com)
+
+	* valprint.c (type_print_base, type_print_method_args):
+	Print C++ constructor methods without bogus "return type."
+
+Sat Jan 25 15:57:59 1992  Fred Fish  (fnf at cygnus.com)
+
+	* infptrace.c (child_xfer_memory):  Parameter "target" should
+	be a pointer to a structure, not the entire structure.
+
+Fri Jan 24 01:30:27 1992  Fred Fish  (fnf at cygnus.com)
+
+	* depend:  Convert the couple of references to ansidecl.h that
+	used the local gdb version to use the ../include version.
+
+Thu Jan 23 22:24:43 1992  Fred Fish  (fnf at cygnus.com)
+
+	* procfs.c
+	(child_xfer_memory): Takes pointer to a struct, not entire struct.
+	(inferior_proc_init):  Fix non-ANSI version of args.
+	(attach):  Call print_sys_errmsg with correct number of args.
+	(mappingflags):  Make static, does not need to be global.
+
+	* i386-tdep.c (i386_frame_num_args):  Takes a pointer to a struct
+	not the entire struct itself.
+
+	* valops.c (value_assign):  Cast some args to modify_field() and
+	{read,write}_register_bytes() correctly.
+
+	* ansidecl.h:  Removed, is duplicate of ../include/ansidecl.h
+
+	* Makefile.in (MALLOCSRC):  Removed reference to removed local
+	copy of ansidecl.h.
+
+	* dwarfread.c (list_in_scope):  Needs an initial value, use file
+	scope.
+
+Mon Jan 20 19:06:28 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* main.c (main):  Make option_index local to keep new getopt happy.
+	main.c, solib.c, Makefile.in:  Update copyright notices.
+
+Mon Jan 20 08:54:00 1992  Michael Tiemann  (tiemann at cygnus.com)
+
+	* cplus-dem.c (cplus_demangle): Correctly demangle destructors.
+
+Sat Jan 18 17:17:45 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in (HFILES):  Add partial-stab.h.
+
+Sat Jan 18 16:45:01 1992  Fred Fish  (fnf at cygnus.com)
+
+	* config/mh-stratus, config/mt-stratus, tm-stratus.h, xm-stratus.h:
+	New files for stratus.  Not complete enough to actually build
+	on the Stratus machine; that awaits copyright assignment for
+	i860 changes.
+
+	* Makefile.in (USER_CFLAGS):  Add macro specifically reserved
+	for getting custom flags into CFLAGS when doing makes.
+
+	* configure.in:  Add config information for stratus.
+
+Thu Jan 16 00:51:46 1992  Fred Fish  (fnf at cygnus.com)
+
+	* dbxread.c (process_one_symbol):  Pass address of structure
+	to complain(), rather than the whole structure.
+
+Wed Jan 15 09:56:16 1992  Fred Fish  (fnf at cygnus.com)
+
+	* solib.c (solib_add_common_symbols):  Only compile in when not
+	using SVR4 style shared libraries.
+
+Tue Jan 14 22:34:00 1992  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (locval):  Add offreg flag to indicate location
+	values that are computed off a base register.
+
+	* dwarfread.c (new_symbol):  Rework TAG_global_variable and
+	TAG_local_variable cases to account for static variables
+	within function scopes.
+
+Tue Jan 14 12:28:52 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* inflow.c:  remove #include <sys/dir.h>.  Not necessary, and
+	doesn't exist on some systems.
+
+	* infrun.c (wait_for_inferior!!!!):  Prevent gdb from hanging when
+	nexting over recursive function calls.
+
+	* target.c (target_read_string):  Create this routine to read null
+	terminated strings from the target.  It deals with running off the
+	end of memory elegantly as well.  solib.c (find_solib):  Use
+	target_read_string() to avoid problems with running off the end of
+	memory.
+
+	* inflow.c (child_terminal_info):  #ifdef TIOCPGRP around lines
+	that reference pgrp_inferior.
+
+Mon Jan 13 14:57:11 1992  Per Bothner  (bothner at cygnus.com)
+
+	* tm-mips.h:  Removed BLOCK_ADDRESS_ABSOLUTE, now that
+	mips-tfile has been hacked to act more "traditionally."
+	* dbxread.c:  Fixed typo in comment.
+
+Sun Jan 12 13:08:36 1992  Per Bothner  (bothner at cygnus.com)
+
+	* mips-tdep.c (mips_skip_prologue):  Add some number of
+	'sw' instructions before 'addiu' adjusts the stack.
+
+Fri Jan 10 13:47:06 1992  Fred Fish  (fnf at cygnus.com)
+
+	* dwarfread.c (start_symtab, end_symtab, scopecount, openscope,
+	freescope, buildblock closescope, record_line, add_symbol_to_list,
+	gatherblocks, make_blockvector):  Extensive changes to switch
+	to generic symbol table building code in buildsym.c.  Remove
+	scope tree structures and functions, symbol table building
+	functions, and lots of other small changes.
+
+	* dwarfread.c:  Add new macros GCC_PRODUCER and STREQN.  Remove
+	GCC_COMPILED_FLAG_SYMBOL and GCC2_COMPILED_FLAG_SYMBOL.
+
+Tue Jan  7 13:09:57 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* buildsym.c (cleanup_undefined_types):  Add support for enums.
+	This fixes the 'GDB internal error.  cleanup_undefined_types with
+	bad type' problem.
+
+Sun Jan  5 09:47:50 1992  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c:  detect gcc2 compilations.
+
+Thu Jan  2 15:07:41 1992  John Gilmore  (gnu at cygnus.com)
+
+	* sparc-pinsn.c:  Rename bitfields that overlap with macro names
+	in ../include/opcode/sparc.h.
+
+Wed Jan  1 04:29:00 1992  Fred Fish  (fnf at cygnus.com)
+
+	* Makefile.in:  Change tm-svr4.h to tm-sysv4.h.  Change xm-svr4.h
+	to xm-sysv4.h.  Split OPCODE_DIR into OPCODE_DIR1 and OPCODE_DIR2
+	to reflect actual locations of opcode files, so TAGS target will
+	be buildable.
+
+	* i386-tdep.c:  Change an erroneous 'm68k' reference to 'i386'.
+
+	* i386-tdep.c (supply_fpregset, fill_fpregset):  Remove m68k
+	code.
+
+	* m68k-tdep.c (supply_fpregset, fill_fpregset):  Fix array
+	dereferencing to access the correct elements.
+
+	* valops.c (value_addr):  Declare return type of external func
+	value_copy().
+
+	* xcoffread.c:  Undefine next_symbol_text before redefining it.
+
+For older changes see ChangeLog-9091
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-93 b/gdb/ChangeLog-93
new file mode 100644
index 0000000..463154d
--- /dev/null
+++ b/gdb/ChangeLog-93
@@ -0,0 +1,7597 @@
+Fri Dec 31 14:33:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* nindy-share/nindy.c: Fix order of arguments to store_unsigned_integer
+	(second and third arguments were reversed).
+	(say): Use varargs.
+
+Fri Dec 31 12:13:47 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote-mips.c: Add timeout parameter to mips_request and
+	mips_receive_packet.
+	(callers): pass in mips_receive_wait except mips_initialize (where
+	we use it to clean up the kludge where we had been changing
+	mips_receive_wait temporarily) and mips_wait (where we pass in
+	-1 for no timeout).
+
+Fri Dec 31 14:33:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stack.c (print_block_frame_locals): Also print LOC_BASEREG variables.
+
+Fri Dec 31 06:55:38 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (find_methods): Call fprintf_symbol_filtered with DMGL_ANSI.
+
+Thu Dec 30 10:16:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* values.c (unpack_long): Fix garbled error message.
+
+	* remote-mips.c (mips_error): New function.
+	* remote-mips.c: Use it instead of error() most places.
+	* remote-mips.c (mips_receive_packet): New arg throw_error.
+	(mips_initialize): Use it not catch_errors.
+	* defs.h: Declare error_pre_print and warning_pre_print here...
+	* main.c: ...not here.
+
+	* breakpoint.c (breakpoint_chain): Make static.
+	* breakpoint.c, breakpoint.h (frame_in_dummy): New function.
+	* stack.c (print_frame_info): Use it.
+
+Thu Dec 30 07:41:36 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* exec.c (add_to_section_table):  Check for SEC_ALLOC instead of
+	SEC_LOAD to handle .bss segments properly.
+
+Thu Dec 30 10:16:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Enable code which assumes that if
+	we jump into the prologue from another function, then it was a
+	subroutine call.  #if 0 AT_FUNCTION_START; the above code should
+	take care of this case.
+
+Wed Dec 29 12:32:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valprint.c (val_print_string): Change chunksize from 200
+	to 8.
+
+	* symfile.c (generic_load): If no arguments, get file name
+	from get_exec_file.
+
+	* c-exp.y: Revert Kung's change.  "..." is not a type, and the
+	change caused "p (...)0" to dump core.
+	* gdbtypes.c (check_stub_method): Don't pass "..." to
+	parse_and_eval_type.  This should fix the bug which Kung was
+	trying to fix.
+
+	* stabsread.c (define_symbol): If we choose not to combine
+	two symbols, don't just ignore the second (LOC_REGISTER) one.
+	* printcmd.c (print_frame_args): If we have a LOC_ARG and a
+	LOC_REGISTER, use the LOC_ARG not the LOC_REGISTER.
+
+Tue Dec 28 15:08:00 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* solib.c (DEBUG_BASE):  Remove macro and all references.
+	* solib.c (debug_base_symbols):  Add array of symbols to lookup.
+	* solib.c (IGNORE_FIRST_LINK_MAP_ENTRY):  Add macro.
+	* solib.c (look_for_base, locate_base):  Use debug_base_symbols.
+	* solib.c (find_solib):  Use IGNORE_FIRST_LINK_MAP_ENTRY.
+
+Tue Dec 28 12:06:57 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* c-exp.y : fix grammar to parse ellipsis (...)
+
+Mon Dec 27 18:42:14 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* stabsread.c (read_type): fix problem when reading static member
+	of a class. caused by change to allow :: inside template
+	instantiated name.
+
+Mon Dec 27 11:07:05 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h: Expand on comments for TYPE_CODE_BITSTRING and
+	TYPE_CODE_STRING a bit.
+
+	* m68k-tdep.c (m68k_skip_prologue, m68k_find_saved_regs):
+	Allow pea %fp; move.l %sp, %fp instead of link instruction to
+	set up the new frame.
+
+	* main.c (init_main): Change "set remotedebug" back to var_zinteger
+	from var_boolean.
+
+	* c-exp.y (yylex): Don't try to deal with nested types.
+
+	* cp-valprint.c (cplus_print_value): Call check_stub_type on
+	TYPE_BASECLASS (type, i) before we look at its name.
+
+	* dbxread.c: Move default definition of GCC_COMPILED_FLAG_SYMBOL
+	from here . . .
+	* symtab.h: . . . to here.
+	* dbxread.c (record_minimal_symbol): Move check for gcc{,2}_compiled.
+	and __gnu_compiled* from here . . .
+	* minsyms.c (prim_record_minimal_symbol_and_info): . . . to here.
+	* minsyms.c (prim_record_minimal_symbol): Call
+	prim_record_minimal_symbol_and_info rather than duplicating code.
+	* minsyms.c, symtab.h (prim_record_minimal_symbol{,_and_info}),
+	coffread.c (record_minimal_symbol),
+	xcoffread.c (RECORD_MINIMAL_SYMBOL), callers: Add objfile parameter.
+
+Sun Dec 26 20:44:02 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* dbxread.c (process_one_symbol): Handle stabs-in-som just like
+	stabs-in-elf.
+	(pastab_build_psymtabs): Likewise.
+
+	* hppa-tdep.c: Change all comments to reference %r3 or frame
+	pointer rather than %r4.
+	(frame_chain, skip_prologue, dig_rp_from_stack): Handle %r3 as the
+	frame pointer.
+
+	* config/pa/tm-hppa.h (FP_REGNUM): Define as %r3.
+	(FIND_FRAME_SAVED_REGS): Handle %r3 as frame pointer.
+	(CALL_DUMMY): Likewise.
+
+Sun Dec 26 16:59:39 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* exec.c (exec_file_command): If error occurs after we have opened
+	exec_bfd but before we call push_target, make sure to close exec_bfd.
+
+	* infrun.c (wait_for_inferior): Remove confusing and inaccurate
+	stuff about subroutine calls, return, etc., from comment which
+	says "We've wandered out of the step range.".
+
+Sun Dec 26 09:18:10 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior): When checking whether the line has
+	changed, check the symtab as well.
+
+Sun Dec 26 09:18:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.c (force_to_range_type): Use switch statement.
+	complain() not warning() if the TYPE_CODE isn't one we know how to
+	deal with gracefully.  Use builtin_type_int not
+	lookup_fundamental_type (the objfile we passed to
+	lookup_fundamental_type was sometimes NULL).
+
+	* valops.c (call_function_by_hand, push_word), defs.h (push_word),
+	convex-xdep.c, m88k-nat.c, i386m3-nat.c, mips-tdep.c, mipsm3-nat.c,
+	ns32km3-nat.c, remote-bug.c, m88k-tdep.c, remote-hms.c, remote-mips.c,
+	config/gould/tm-np1.h, hppa-tdep.c (hppa_fix_call_dummy), remote-vx.c:
+	Use REGISTER_SIZE, unsigned LONGEST, and
+	{store,extract}_unsigned_integer, instead of sizeof
+	(REGISTER_TYPE) and REGISTER_TYPE.
+	* All tm.h files: Change REGISTER_TYPE to REGISTER_SIZE.
+	* hppa-tdep.c (pa_print_fp_reg): Remove unused variable val.
+
+	* Makefile.in (ALLDEPFILES): Remove i386ly-nat.c and m68kly-nat.c.
+	Add lynx-nat.c.
+
+Sat Dec 25 20:05:41 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+    * hppa-tdep.c (init_extra_frame_info): Correctly adjust the base
+	of the current frame when "fromleaf" is true.  Do not adjust the
+	frame base of the innermost frame if it is a leaf function.
+
+Sat Dec 25 13:39:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (define_symbol): Only combine a p/r pair into a
+	LOC_REGPARM if REG_STRUCT_HAS_ADDR.
+
+Sat Dec 25 09:50:29 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valops.c (value_struct_elt): Check for (value)-1 return from
+	search_struct_method.
+
+Sat Dec 25 09:50:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h: Move definitions of TARGET_*_BIT after include of tm.h.
+	The old way (using #undef in tm.h) was ugly and asking for
+	trouble, because it makes it possible for some file to use the
+	wrong definition.  Move definition of HOST_CHAR_BIT after definition
+	of TARGET_CHAR_BIT.
+	* config/alpha/tm-alpha.h, config/h8300/tm-h8300.h,
+	config/h8500/tm-h8500.h, config/z8k/tm-z8k.h: Don't undef TARGET_*_BIT
+	before defining them.
+
+	* mdebugread.c: Change the builtin_type_* in this file to
+	mdebug_type_* and make them static.  Use TYPE_CODE_ERROR for
+	complex and float decimal.
+
+	* printcmd.c (disassemble_command): Call wrap_here between printing
+	address and printing instruction.
+
+Fri Dec 24 14:23:57 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (read_type): Don't fall through 'S' case (the case it
+	was falling though happened to do the right thing ("break;") but that
+	is hardly a good thing to assume).
+
+Tue Dec 21 13:32:02 1993  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y (match_dollar_tokens):  Fix off-by-one bug.
+	* ch-lang.c (chill_is_varying_struct), ch-lang.h:  New function.
+	* ch-lang.c (chill_printstr):  Use double quotes, not single quotes.
+	* ch-typeprint.c (chill_type_print_base):  Handle TYPE_CODE_BITSTRING.
+	Improve printing of TYPE_CODE_STRING, TYPE_CODE_SET, and
+	TYPE_CODE_STRUCT (including checking chill_is_varying_struct).
+	Print TYPE_DUMMY_RANGE by printing its TYPE_TARGET_TYPE.
+	Handle TYPE_CODE_ENUM.
+	* ch-valprint.c (chill_val_print):  Handle TYPE_CODE_BITSTRING.
+	For TYPE_CODE_STRING, never print address.  Handle VARYING strings. 
+	* gdbtypes.c (force_to_range_type):  New.
+	* gdbtypes.c (create_set_type):  Make work, following Chill layout.
+	* gdbtypes.h (TYPE_LOW_BOUND, TYPE_HIGH_BOUND, TYPE_DUMMY_RANGE): New.
+	* stabsread.c (read_type):  Distinguish string and bitstring from
+	char-array and set.
+	* valarith.c (value_subscript), valops.c (value_coerce_array):
+	Handle STRINGs as well as ARRAYs.
+	* valarith.c (value_bit_index):  Fix think.  Use new macros.
+
+
+Fri Dec 17 10:45:32 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* symtab (decode_line_1): fix a bug when position char is not
+	set correctly.
+	* c-valprint (c_val_print): handle vtbl printing when vtbl is not
+	set up yet.
+
+Thu Dec 16 16:46:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* mips-tdep.c (read_next_frame_reg): If SIGFRAME_REG_SIZE is not
+	defined, define it as 4.
+
+Thu Dec 16 13:08:01 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* config/m68k/nm-hp300bsd.h: Correctly identify 4.3BSD vs 4.4BSD.
+
+	* config/m68k/tm-hp300bsd.h (REMOTE_BPT_VECTOR): Define.
+
+	* config/m68k/tm-m68k.h (REMOTE_BPT_VECTOR): Allow targets to
+	override.
+	(REMOTE_BREAKPOINT): Likewise.
+
+Thu Dec 16 09:14:58 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hp_function_type): Correctly handle
+	pass-by-value structures > 64bits in size.
+	(process_one_debug_symbol): Likewise.
+
+Mon Dec 13 20:17:39 1993  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Implement support for Chill POWERSETs.
+	* ch-exp.y (operand_2):  Implement 'Element IN PowerSet'.
+	* ch-typeprint.c (chill_type_print_base):  Handle POWERSETs.
+	* ch-valprint.c (chill_val_print):  Handle TYPE_CODE_SET.
+	* eval.c (evaluate_subexp):  Implement BINOP_IN.
+	* expression.h (enum exp_opcode):  Added BINOP_IN.
+	* gdbtypes.c (create_set_type), gdbtypes.h:  New function.
+	* stabsread.c (read_type):  If 'S', create a set type.
+	* valarith.c (value_bit_index, value_in), value.h:  New functions,
+	for indexing in SETs.
+
+Mon Dec 13 06:42:37 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (pa_symfile_init): Check for the existance of stabs
+	after DBX_TEXT_SECT has been initialized.
+
+Tue Nov 23 17:29:28 1993  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+        * config/h8300/tm-h8300.h (BREAKPOINT): Insn changed to sleep.
+	(DECP_PC_AFTER_BREAK): Now is 0.
+	* config/h8500/tm-h8500.h (REGISTER_BYTES, REGISTER_BYTE,
+	REGISTER_NAMES): update to new view.  (INIT_EXTRA_FRAME_INFO): No
+	extra frame info now.
+	* config/sh/sh.h (NOP): Define NOP insn.
+	* config/z8k/tm-z8k.h (BIG): is now sim_z8001_mode.  
+	* config/z8k/z8ksim.mt (TDEPFILES): Add remote-sim.o to list.
+	* ser-go32.c: Lint. (strncasecmp): Removed, now in libiberty.
+	(go32_readchar): Special handling for faster polling. (async
+	structure): Volatile.
+	* h8300-tdep.c (print_register_hook): Allocate and use the right
+	number bytes for the raw register.
+	* h8500-tdep.c (regoff, frame_find_saved_reg, examine_prologue):
+	deleted. (h8500_register_size, h8500_register_virtual_type, ):
+	Use new way of counting registers.
+	* remote-e7000.c (echo_index): deleted. (expect): Better handling
+	of user interrupts. (expect_prompt): Remove never used log file
+	support. (want, want_nopc): Add support for H8/300H.
+	(fetch_regs_from_dump): Treat \r and \n as whitespace.
+	(e7000_drain): Send an "end" command before waiting for output to
+	stop.  (e7000_wait): Cope with H8/300H, better handling of user
+	interrupts.  (why_stop, expect_n, sub2_from_pc): New function.
+	* remote-utils.c (gr_load_image): call fflush and QUIT more regularly.
+	* utils.c (notice_quit): New function for polling for user interrupts.
+
+Fri Dec 10 15:53:56 1993  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* stabsread.c (read_array_type):  Allow negative array bounds,
+	without interpreting that to mean "adjustable."
+	* ch-valprint.c (chill_val_print):  Handle RANGE types.
+	* ch-typeprint.c (chill_type_print_base):  Handle BOOL.
+	Handle variant records.  Handle RANGE types.
+
+Tue Dec  7 15:41:32 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* config/mips/idt.mt: Use tm-idt.h instead of tm-bigmips.h.
+	* config/mips/idtl.mt: Use tm-idtl.h instead of tm-mips.h.
+	* config/mips/tm-idt.h, config/mips/tm-idtl.h: New files; use
+	different BREAKPOINT value for IDT.
+
+	* mipsread.c: Include bfd.h and coff/sym.h.
+
+Mon Dec  6 16:34:10 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* ser-unix.c (set_tty_state): set the rest of the terminal state
+	  pieces.
+
+Mon Dec  6 12:01:37 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* configure.in: Recognize mips* for all mips targets.
+	(mips*el-*-elf*, mips*-*-elf*): New targets; use idt and idtl.
+
+	Added Irix 5 support.
+	* configure.in (mips-sgi-irix5*): New host and target.  Use irix5
+	for both.
+	* config/mips/irix5.mh, config/mips/irix5.mt,
+	config/mips/xm-irix5.h, config/mips/nm-irix5.h,
+	config/mips/tm-irix5.h, irix5-nat.c: New files for Irix 5 support.
+	* mdebugread.c: New file, split out of mipsread.c.  Added
+	elfmdebug_build_psymtabs routine.  Added some checks on external
+	symbols.  Changed code to keep ecoff_debug_info and
+	ecoff_debug_swap structs in the psymtab and in global pointers
+	rather than retrieving them from the bfd.  Also changed to keep
+	the pending list with the psymtab rather than the objfile (each
+	psymtab for a single objfile points to the same pending list).
+	* mipsread.c: Bulk of file moved into mdebugread.c, leaving just
+	the sym_fns.
+	* Makefile.in (SFILES): Added mdebugread.c.
+	(OBS): Added mdebugread.o.
+	(mdebugread.o): New target.
+	* symfile.h: Declare mdebug_build_psymtabs and
+	elfmdebug_build_psymtabs.
+	* elfread.c (struct elfinfo): Added mdebugsect field.
+	(elf_locate_sections): Remember location of .mdebug section.
+	(elf_symfile_read): Call elfmdebug_build_psymtabs on .mdebug
+	section.
+	* infrun.c (AT_FUNCTION_START): Set to 0 if not already defined.
+	(wait_for_inferior): Use AT_FUNCTION_START if it is defined to see
+	if PC is at the start of a function.
+	* mips-tdep.c (read_next_frame_reg): Use SIGFRAME_REG_SIZE, and
+	give it a default definition.
+	(mips_skip_prologue): Skip instructions which initialize $gp
+	register.
+	(in_sigtramp): New procedure, moved in from mipsread.c.
+	* config/mips/tm-mips.h: Declare in_sigtramp.
+
+	* serial.h (serial_fdopen): Make parameter const to match
+	function definition.
+
+Fri Dec  3 14:20:43 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* config/mips/irix4.mh:  Enable ser-tcp.o.
+
+Tue Nov 30 15:24:24 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* Makefile.in (check): Do not use subdir_do, so that
+	TARGET_FLAGS_TO_PASS is used correctly.
+
+Mon Nov 29 16:10:38 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* i386-nlmstub.c:  Undo I/O redirection changes by Tom Lord.
+	These definitely won't work under Netware.
+
+Mon Nov 29 15:34:58 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* stabsread.c(read_struct_field): Fix the check when getting to
+	member functions.
+
+Mon Nov 29 16:48:16 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	gcc -Wall -O lint:
+	* mips-tdep.c (heuristic_proc_desc): Initialize reg30 to avoid
+	warning.  Unnest comment.
+	(init_extra_frame_info): Remove unused variable mask.
+	(MASK): Fully parenthesize.
+	(mips_push_dummy_frame): Remove unused variable val.
+	(mips_skip_prologue): Remove unused variables f and b.
+
+Mon Nov 29 12:23:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_symbol, parse_partial_symbols): Do not create
+	(partial) symbols for opaque struct definitions.
+
+Mon Nov 29 11:36:57 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* i386ly-tdep.c (i386lynx_saved_pc_after_call):  Change call_inst
+	to unsigned char to avoid domain warning for some values.
+
+Mon Nov 22 23:42:59 1993  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote-e7000.c (e7000_wait): Cope with H8/300 register dump.
+	* config/h8300/h8300hms.mt: Add remote-e7000.
+
+Mon Nov 22 11:03:45 1993  Fred Fish  (fnf@cygnus.com)
+
+	Merged changes from kev@spuds.geg.mot.com (Kevin A. Buettner):
+	* gdb/config/m88k/delta88.mh (NATDEPFILES): Added corelow.o and
+	coredep.o to this list.
+	* gdb/m88k-nat.c (m88k_register_u_addr):  Avoid error when passed
+	the number for an M88110 extended register by just returning the
+	address of r0.
+
+Sat Nov 20 09:20:51 1993  Fred Fish  (fnf@rtl.cygnus.com)
+
+	* go32-xdep.c (re_comp, re_exec):  Remove stubs now that gdb
+	always uses it's own version of regex.
+
+Fri Nov 19 18:23:19 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* valops.c(value_struct_elt_for_reference): enhance  search operator in
+	c++.
+	* symtab.c(decode_line_1): same as above.
+
+Fri Nov 19 15:08:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (decode_line_1): Add comment about use of
+	return_to_top_level directly instead of error.  Add comment saying
+	that the '' should not be needed--that the completer should be fixed.
+
+Fri Nov 19 11:00:33 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* symtab.c(decode_line_1): fix the inconsistency of setting
+	breakpoint with '' or without them. The '' is needed when you
+	want name completion.
+
+Thu Nov 18 08:25:50 1993  Fred Fish  (fnf@cygnus.com)
+
+	* valprint.c (val_print_string):  When looking for a null
+	terminator compare current bufsize to fetchlimit to determine
+	when to stop, instead of computing buffer+fetchlimit which
+	may overflow for very large limits (like "unlimited").
+
+Wed Nov 17 18:23:09 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* eval.c(evaluate_subexp): to use unified search so type conversion 
+	operator works in calling method.
+	* valarith.c(value_x_binop, value_x_unop): same as above.
+	* valops.c(search_struct_method): same as above.
+
+Wed Nov 17 18:47:34 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* mipsread.c: Change use of ECOFF information to correspond to
+	changes in bfd/libecoff.h.
+	(mipscoff_symfile_offsets): Made static.
+
+Wed Nov 17 09:43:31 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* valops.c (typecmp): improve prototype matching when calling
+	a method. Make 'p (*(ostream *) &cout) << "lll" ' to work.
+	* eval.c(evalute_subexp): fix operator search problem when call
+	like  p x.'operator+'(i).
+
+Tue Nov 16 17:15:03 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* i386ly-nat.c, i386lynx-nat.c, m68kly-nat.c:  Remove.  Move
+	common code into lynx-nat.c.
+	* lynx-nat.c:  New module.  Contains portable code for Lynx native
+	stuff (mostly ptrace related).
+	* config/i386/i386lynx.mh (NATDEPFILES):  i386ly-nat.o -> lynx-nat.o
+	* config/m68k/m68klynx.mh (NATDEPFILES):  i386ly-nat.o -> lynx-nat.o
+
+	* config/nm-lynx.h, config/tm-lynx.h:  New files to contain
+	non-architecture specific native and target defs.
+	* config/i386/nm-i386lynx.h, config/i386/tm-i386lynx.h,
+	config/m68k/nm-m68klynx.h, config/m68k/tm-m68klynx.h:  Move all
+	(arch) portable stuff into ../{tm nm}-lynx.h.
+
+Tue Nov 16 13:33:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (gdb_mangle_name): Only assume that the physname is
+	the entire mangled name if it looks like the mangled name of a
+	constructor.  Needed for testsuite to work with GCC 2.4.5.
+
+	* a68v-nat.c: Replace with new version from Troy Rollo.  The
+	version	I am replacing appears to be an old copy of sun3-nat.c.
+	* dstread.c (dst_symfile_read): Replace sort_all_symtab_syms call
+	with loop.
+
+	* Makefile.in (TAGS): Depend on TAGFILES_{NO,WITH}_SRCDIR.
+
+	* Makefile.in: (HFILES,TAGFILES): Split into _WITH_SRCDIR and
+	_NO_SRCDIR versions.
+	(TAGS): Only add srcdir to TAGFILES_NO_SRCDIR.
+	(This is part of a long saga involving me putting srcdir on
+	everything (perhaps for now-obsolete reasons, I forget), Rich
+	removing the srcdir from everything, Stu putting it back some
+	places for Sun make, and me just now getting around to fixing
+	`make TAGS' again).
+
+Mon Nov 15 12:29:10 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* stack.c(print_frame_info): print demangled function name
+	ansi style.
+
+Mon Nov 15 14:32:29 1993  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+    	* remote-e7000.c: New file to cope with the Hitachi E7000 ICE.
+	* remote-utils.c, remote-utils.h (gr_load_image): New function to
+	download to target.
+	* h8300-tdep.c, h8500-tdep.c, remote-z8k.c, sh-tdep.c z8k-tdep.c
+	(sim_load): delete.
+	* remote-sim.c (gdbsim_load): Use gr_load_image, rather than
+	sim_load.
+	* config/sh/sh.mt: Add remote-e7000
+
+Mon Nov 15 11:38:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/linux.mh: Remove XM_CLIBS, TERMLIB, SYSV_DEFINE, and
+	REGEX.
+	* config/i386/xm-linux.h: Don't include xm-i386v.h.  Define
+	HOST_BYTE_ORDER ourselves.  Define HAVE_TERMIOS not HAVE_TERMIO.
+	Define NEED_POSIX_SETPGID.  Include unistd.h.
+
+Mon Nov 15 12:29:10 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* symtab.c(gdb_mangle_name): fix the problem with constructor
+	name mangling.
+
+Mon Nov 15 11:38:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h: Add TYPE_FLAG_TARGET_STUB.
+	* gdbtypes.c (check_stub_type): On TYPE_FLAG_TARGET_STUB, do
+	what cleanup_undefined_types does for arrays, except we clear
+	TYPE_FLAG_TARGET_STUB if we fix up the type.
+	* stabsread.c (cleanup_undefined_types): Add comments about how
+	doing arrays here is no longer the clean way to do it.
+	(read_array_type): Set TYPE_FLAG_TARGET_STUB as well as calling
+	add_undefined_type.
+	* c-typeprint.c, ch-typeprint.c: Move call to check_stub_type
+	outside switch so it happens for all type codes.
+	* cp-valprint.c (cp_print_value_fields): Recurse to val_print,
+	instead of c_val_print, so that check_stub_type gets called.
+
+	* gdbtypes.h, gdbtypes.c, m2-lang.c, ch-lang.c, c-lang.c: Remove
+	TYPE_FLAG_SIGNED.  It was inconsistently set, never checked
+	(except in recursive_dump_type), and is pointless.
+
+Mon Nov 15 00:40:38 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+        * paread.c (pa_symfile_init): Look for the $TEXT$ section rather
+	than the .text section.
+
+Sun Nov 14 00:28:13 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c: Remove #if 0'd dbx_class_complaint.  We now handle
+	this (more or less) gracefully, and complain() was never a good
+	way of dealing with this.
+
+	* stabsread.c (read_type): Skip the colon when reading a
+	cross-reference.  Only complain, not error_type, on unrecognized
+	cross-reference types.  error_type, not dump core, if the colon is
+	missing.
+
+Fri Nov 12 16:23:08 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* config/m68k/tm-sun3.h:  Disable use of alternate breakpoint insn
+	when doing remote stuff.
+
+Fri Nov 12 16:22:39 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-exp.y (yylex): Call lookup_symtab not lookup_partial_symtab.
+
+	* partial-stab.h: Ignore ':' symbol descriptors.  Same case as
+	Kung's stabsread.c change.
+
+Fri Nov 12 11:18:02 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* stabsread.c (patch_block_stabs, define_symbol, read_type): in
+	g++ template instantiation, nested class can be part of the
+	params, and '::' can gets into symbol or type names. This is
+	to fix the problem.
+
+	* gdbtypes.c (lookup_struct_elt_type): Handle type ref or pointer
+	to struct/union case.
+
+Fri Nov 12 10:39:31 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* coff-solib.c (coff_solib_add):  Cast result of alloca().
+	* m68k-tdep.c (m68k_saved_pc_after_call):  Get rid of
+	GDB_TARGET_IS_SUN3.  Use more general SYSCALL_TRAP macro.
+	* config/m68k/m68klynx.mh (NATDEPFILES):  Remove exec.o (it's
+	already in TDEPFILES).
+	* config/m68k/tm-m68k.h (SAVED_PC_AFTER_CALL):  Use
+	m68k_saved_pc_after_call.
+	* Remove all Sun3 specific stuff.
+	* (FIX_CALL_DUMMY):  Cast arg to bfd_putb32 to unsigned char *.
+	* config/m68k/tm-m68klynx.h:  Define SYSCALL_TRAP as trap #10.
+	Disable REMOTE_BREAKPOINT mechanism.
+	* config/m68k/tm-sun3.h:  Get rid of GDB_TARGET_IS_SUN3.
+	* Protect from multiple includion.
+	* Move Sun3 specific stuff from tm-m68k.h to here.
+	* Define SYSCALL_TRAP as trap #0.
+	* Remove def of SAVED_PC_AFTER_CALL (now in tm-m68k.h).
+	* gdbserver/low-lynx.c:  Redo all register store/fetch stuff to
+	make it portable for 386 and 68k.
+
+Fri Nov 12 09:53:26 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mips-tdep.c (init_extra_frame_info): Check to see whether the
+	registers mentioned in the proc_desc have been saved.  This
+	generalizes mips_in_lenient_prologue in the sense that we keep
+	searching until we've found saves for all the registers, not just
+	look for a "lenient prologue" pattern.
+	* mips-tdep.c: #if 0 lenient prologue code.
+
+	* mips-tdep.c (heuristic_proc_desc): Don't assume a host short
+	is 16 bits.
+
+Thu Nov 11 19:58:05 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/i386sol2.mh: Comment out corelow.o.
+
+	* printcmd.c (address_info): Use filtered, not unfiltered functions.
+	We should be able to deal with a QUIT here.
+
+Thu Nov 11 15:22:20 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* printcmd.c (address_info): Use fprintf_symbol_filtered
+	to print the symbol name.
+
+	* stabsread.c (define_symbol): Handle cfront lossage for 
+	struct/union/enums and typedefs.
+
+	* partial-stab.h (case N_BINCL): Update psymtab_language
+	as appropriate when changing subfiles.
+	(case N_SOL): Update psymtab_language as appropriate when
+	changing subfiles.  Add typedef for structs, unions, and enums
+	when processing C++ files.
+
+Thu Nov 11 13:18:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* README: Remove information on languages and just cite the (newly
+	updated) information in doc/gdb.texinfo instead.
+
+	* delta68-nat.c: Fix typos (add missing ");" and stuct -> struct).
+
+Wed Nov 10 09:31:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (process_one_symbol, N_RBRAC): Don't clear
+	within_function just because local_symbols is NULL.  It appears
+	that this bug has existed since the 10 Apr 89 change which started
+	clearing within_function here.
+
+	* config/m68k/tm-m68k.h: Clean up CALL_DUMMY comment.
+	* config/m68k/{tm-hp300bsd.h,tm-hp300hpux.h,tm-m68k-em.h,
+	tm-monitor.h,tm-sun3.h,tm-vx68.h}, config/sparc/tm-sparc.h:
+	Define BELIEVE_PCC_PROMOTION.
+	* dbxread.c: Remove BELIEVE_PCC_PROMOTION define.  The code which
+	used this was moved to stabsread.c a long time ago.
+
+	* dstread.c (dst_sym_fns): Update for flavours.
+	* symfile.c (find_sym_fns): Add kludge for apollo like for rs/6000.
+	* dstread.c (dst_symfile_offsets): Set objfile->num_sections.
+
+	gcc -Wall lint:
+	* thread.c: Include "gdbcmd.h" and <ctype.h>.
+	* Makefile.in: Update dependency.
+	* thread.c (thread_command): Remove unused variable p.
+	* values.c (unpack_double): Use len instead of TYPE_LENGTH (type).
+	* valprint.c (print_floating): Correctly check sign bit now that
+	we are using unsigned arithmetic.
+	* symtab.c (find_pc_line_range): Remove unused variables exact_match,
+	ind, and l.
+
+Tue Nov  9 17:42:25 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* valarith.c (value_x_binop): fix search operator in class bug
+	* valarith.c (value_x_unop): fix search operator in class bug
+
+Tue Nov  9 19:20:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (init.c): Add udi2go32.o to list of files that we
+	should not try to search for _initialize_* functions.
+
+	* remote-udi.c (udi_wait): Change UDIGdb_StdoutReady back to
+	UDIStdoutReady.  It accidentally got changed on 24 Oct 93 when
+	stdout was changed to gdb_stdout.  Likewise for UDIGetStdout,
+	UDIStderrReady, and UDIGetStderr.
+
+Tue Nov  9 12:48:06 1993  Tom Lord  (lord@cygnus.com)
+
+	* remote-hms.c (hms_wait): fixed too many arguments to putc_unfiltered.
+
+Tue Nov  9 12:20:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (quit): Also call gdb_flush on standard output and error.
+
+	* .gdbinit: Remove "source /.gdbinit".  It causes a spurious error
+	if /.gdbinit doesn't exist (and I know of no convention of putting
+	something in /.gdbinit).
+
+Mon Nov  8 18:17:11 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* cp-valprint.c (cp_print_value_fields): change output from <no
+	value> to <optimized out or zero length>
+
+Mon Nov 08 17:05:30 1993  Jeffrey Wheat  (cassidy@cygnus.com)
+
+	* Makefile.in: Change RUNTEST_FLAGS back to RUNTESTFLAGS
+		       Change RUNTEST = runtest to test for existance of
+			a runtest in the source tree first.
+
+Mon Nov  8 10:42:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in: Remove unused variable GCC.  Remove "#CC=cc" line
+	which doesn't really relate to anything.
+
+	* Makefile.in (CC_FOR_TARGET): Test for existence of gcc/xgcc, not
+	for existence of gcc/Makefile.
+
+	* inflow.c (terminal_init_inferior), infptrace.c (child_resume):
+	Add comments about use of Lynx PIDGET and how we will want to
+	clean it up.
+
+	* stabsread.c: Remove long_kludge_name code (it was already #if 0).
+	* stabsread.c (read_one_struct_field): Clean up comments to reflect
+	Kung's change of 5 Nov 93.
+	* stabsread.c (read_one_struct_field): Don't give up on unknown
+	visibility character, just shove it in fip->list->visibility.
+	(read_baseclasses): Don't give up on unknown virtual or visibility
+	characters, just assume a reasonable default, complain, and keep
+	going.
+	(attach_fields_to_type): Complain on unrecognized visibility.
+	One result of all this is that '9' (VISIBILITY_IGNORE) can be used
+	in a stab as well as being something which GDB uses internally.
+
+Mon Nov  8 07:57:30 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* configure.in: Remove h8300h, we have multilib now.
+
+Mon Nov  8 06:11:24 1993  D. V. Henkel-Wallace  (gumby@cirdan.cygnus.com)
+
+	* configure.in: Add unixware as a configuration alias for x86
+	sysv4
+
+	* config/i386/i386nw.mt: add i387-tdep.o, exec.o to TDEPFILES
+
+Sun Nov  7 23:49:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (decode_line_1, decode_line_2):  Do not adjust pc by
+	FUNCTION_START_OFFSET if funfirstline is not set.
+
+Fri Nov  5 17:19:30 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* gdbtypes.h : add a field 'ignore_field_bits in cplus_specific,
+	and macros to handle the bits.
+	* stabsread.c (read_one_struct_field): add VISIBILITY_IGNORE, and
+	for field of length 0, set this bit on.
+	* cp-valprint.c (cp_print_value_fields): for VISIBILITY_IGNORE
+	field, print <no value>.
+
+Fri Nov  5 14:43:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Version 4.11.2.
+
+Fri Nov  5 09:49:22 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* inflow.c (terminal_init_inferior): Temporarily use Lynx PIDGET
+	macro to set process groups.
+	* infptrace.c (child_resume): Temporarily use Lynx PIDGET to
+	specify resumption of all threads.
+	* infrun.c (wait_for_inferior):  Fix handling of thread-specific
+	breakpoints for systems where DECR_PC_AFTER_BREAK > 0 (ie: backup
+	PC by the right amount when continuing the thread).
+	* thread.c (thread_apply_command):  Add the  `thread apply'
+	command to apply a given GDB command to a list of threads.
+
+Fri Nov  5 05:58:03 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Makefile.in (init.c): Don't call sed if filename is empty.
+
+Thu Nov  4 08:27:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (unknown_symchar_complaint): Make message refer to
+	"symbol descriptor" not "symbol type character" for consistency
+	with stabs.texinfo terminology.
+
+	* stabsread.c (read_struct_fields): Accept either '$' or '.' as
+	the character which introduces a cpp_abbrev or anonymous type.
+
+	* c-lang.c (c_printstr): Print "" to stream (like all the other
+	output from this function), not gdb_stdout.
+
+	* dbxread.c (process_one_symbol): Do relocate 'S' symbols by
+	the text offset (revert 12 Oct 93 change).
+
+	* configure.in: Make hppa*-*-hiux* use hppahpux,
+	not non-existent hppahiux.
+
+Wed Nov  3 16:24:09 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* values.c (value_fn_field): when physical name not found, do not
+	error, but return null.
+	* valops.c (value_struct_elt): when name and args match does not
+	mean it is the one, some times a typedef class can have the same
+	member method and args. This probably will not happen with new
+	version of g++, but it does happen in old g++ and cause gdb error.
+
+Wed Nov  3 09:20:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	Merge changes for dos x udi:
+	* Makefile.in (udi2go32.o): add rule to build this file
+	* 29k-share/udi/udi2go32.c: new file
+	* config/a29k/a29k-udi.mt: add udi2go32.o
+	* 29k-share/udi/{udr.c, udip2soc.c}: #ifdef out the entire file 
+	  if __GO32__ is defined.  What a hack.
+
+Wed Nov  3 09:20:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c (putpkt, getpkt): Don't call interrupt_query.
+
+	* findvar.c (value_of_register): Rename val to reg_val to avoid
+	name conflict with some (e.g. tm-m68k.h) REGISTER_CONVERT_TO_VIRTUAL.
+
+	* main.c: Add variables source_line_number, source_file_name,
+	source_error, source_error_allocated, and source_pre_error.
+	(command_line_input): If source_file_name set, increment
+	source_line_number and set error_pre_print with them.
+	(source_command): Set source_* and make a cleanup so they get
+	set back.
+
+Tue Nov  2 16:28:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stack.c (down_silently_command): Add comment about PR 1913.
+
+	* breakpoint.c (insert_breakpoints, delete_breakpoint): Call
+	target_terminal_ours_for_output before attempting output.
+
+	* fork-child.c (fork_inferior): Fix comment so that it suggests
+	"set shell" rather than having "set env SHELL" affect GDB's
+	operation.
+
+Tue Nov  2 15:03:08 1993  Tom Lord  (lord@rtl.cygnus.com)
+
+	* utils.c (vfprintf_unfiltered): don't use maybe_filtered
+	since it involves a fixed size buffer.
+
+Tue Nov  2 13:42:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* findvar.c (value_of_register, value_from_register),
+	hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
+	valops.c (value_assign):   Use REGISTER_CONVERT_TO_* only if
+	REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
+	Pass desired type to REGISTER_CONVERT_TO_*.
+
+	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
+	Pass length of desired type to store/extract_floating.
+	* config/i386/tm-arm.h, config/i386/tm-i386aix.h, 
+	config/i386/tm-sun386.h, config/i386/tm-symmetry.h, 
+	config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
+	Use extract_floating and store_floating with length of desired type.
+	* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE):  Add type
+	parameter to REGISTER_CONVERT_*.
+
+	* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
+	config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
+	config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
+	config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
+	config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+	config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
+	config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
+	REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL):  Remove
+	versions for which REGISTER_CONVERTIBLE is always false.
+	* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
+	Remove, no longer used.
+
+	* alpha-tdep.c (alpha_register_convert_to_raw,
+	alpha_register_convert_to_virtual):  New routines to handle
+	the different raw formats in alpha floating point registers.
+	* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
+	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW):  Use them.
+
+Tue Nov  2 12:45:23 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	* gdbserver/configure.in: Recognize *-*-lynxos* instead of
+	*-*-lynx*, recognize sparc-*-lynxos*.
+	* gdbserver/Makefile.in (install, install_only): Add.
+	* gdbserver/gdbserver.1: New file, man page for gdbserver.
+
+Tue Nov  2 03:01:01 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	 * hpread.c: Include <time.h> and <sys/types.h>.  Change include
+	 of "libhppa.h" to "som.h".
+	 (BYTES_IN_WORD): Define.
+	 (hppa_sym_fns): "hppa" is 4 characters, not 5.
+	
+Mon Nov  1 09:40:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c, symtab.h, source.c: Change find_line_pc_range to take
+	a struct symtab_and_line argument, rather than a symtab and a line.
+	Re-write it to be based on the address rather than bogusly adding
+	one to the line number and hoping that has something to do with the
+	end of the line.
+
+	* config/m88k/m88k.mh (NATDEPFILES): Remove exec.o.
+
+	* paread.c (pa_symtab_read): Change comments to say ignoring
+	labels really should be handled by the assembler/compiler.
+
+	* Makefile.in: Add -O to CXXFLAGS.
+
+	* TODO: Expand comments on fast watchpoints.
+
+Sun Oct 31 19:45:06 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (pa_symtab_read): Also filter out local symbols
+	starting with "L$".
+
+Sun Oct 31 09:28:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symfile.h (sym_fns), symfile.c (find_sym_fns), xcoffread.c,
+	coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c:
+	Change from using bfd target name to using the flavour.
+
+	* objfiles.h, infcmd.c, symfile.c: Add comments about how various
+	objfiles get created and when we should blow them away.
+
+Sat Oct 30 08:32:53 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symfile.c (reread_symbols): When re-reading symbols, do all the
+	right operations ourself, rather than calling symbol_file_command.
+	If we re-read something, call clear_symtab_users not just
+	breakpoint_re_set.
+	* objfiles.h, objfiles.c (build_objfile_section_table): No longer
+	static.
+	* symfile.c (clear_symtab_users): Call clear_pc_function_cache.
+	* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c
+	(*_symfile_offsets): Set objfile->num_sections.
+	* remote.c (remote_wait), symfile.c (syms_from_objfile):
+	Don't muck with objfile->num_sections now that all the symbol
+	readers set it.
+	* elfread.c: Clean up obsolete comment about handling only DWARF.
+	* paread.c: Remove comment about how we should use an "ordinary"
+	file format with an hppa suffix.  There is nothing ordinary about SOM.
+
+	* config/i386/{i386m3.mh,i386mk.mh}, config/mips/mipsm3.mh,
+	config/ns32k/ns32km3.mh: Change MMALLOC_LIB to MMALLOC.
+	* TODO: Update Mach stuff.
+
+Fri Oct 29 16:30:36 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	LynxOS support:
+	* configure.in: Change *-*-lynx* to *-*-lynxos*, add
+	sparc-*-lynxos*.
+	* Makefile.in (ALLDEPFILES): Add m68kly-nat.c, sparcly-nat.c.
+	Rename i386lynx-nat.[co] to i386ly-nat.[co].
+	(ALLCONFIG): Add config/{m68k,sparc}/{m68k,sparc}lynx.m[ht].
+	(m68kly-nat.o, sparcly-nat.o): Add rules.
+	* i386ly-tdep.c: Cosmetics.
+	* i386lynx-nat.c: Removed.
+	* i386ly-nat.c: New file, was i386lynx-nat.c.
+	* m68kly-nat.c: New file.
+	* sparcly-nat.c: New file.
+	* config/xm-lynx.h: New file, cpu-independent host info.
+	* config/i386/i386lynx.mh: Changes for consistency.
+	* config/i386/i386lynx.mt: Ditto.
+	* config/i386/tm-i386lynx.h: Ditto.
+	* config/i386/nm-i386lynx.h: Ditto.
+	* config/i386/xm-i386lynx.h: Include config/xm-lynx.h.
+	* config/m68k/m68klynx.mh, config/m68k/m68klynx.mt,
+	config/m68k/tm-m68klynx.h, config/m68k/nm-m68klynx.h,
+	config/m68k/xm-m68klynx.h: New files, M68K LynxOS support.
+	* config/sparc/sparclynx.mh, config/sparc/sparclynx.mt,
+	config/sparc/tm-sparclynx.h, config/sparc/nm-sparclynx.h,
+	config/sparc/xm-sparclynx.h: New files, Sparc LynxOS support.
+
+Fri Oct 29 08:11:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h, findvar.c (extract_floating, store_floating): New functions.
+	* Move SWAP_TARGET_AND_HOST from defs.h to findvar.c because it is
+	now used only by extract_floating and store_floating.
+	* valprint.c (print_floating): Use unsigned arithmetic.  Use
+	extract_unsigned_integer instead of SWAP_TARGET_AND_HOST.
+	Change sizeof (float) to 4 and sizeof (double) to 8 (those are always
+	the relevant sizes for this code, which is in #ifdef IEEE_FLOAT).
+	* values.c (unpack_long, unpack_double, value_from_double),
+	valarith.c (value_binop), stabsread.c (define_symbol):
+	Use extract_floating and store_floating instead of
+	SWAP_TARGET_AND_HOST.
+	* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
+	Use extract_floating and store_floating.
+	* config/m88k/tm-m88k.h: Add comments (it should be doing the same).
+	* i386-tdep.c (i386_extract_return_value),
+	* remote-nindy.c (nindy_store_registers): Use store_floating.
+
+Fri Oct 29 09:31:38 1993  Steve Chamberlain  (sac@rtl.cygnus.com)
+
+	* remote-sim.c (gdbsim_store_register):  Change var name so
+	it compiles with non-ANSI compilers.
+
+Fri Oct 29 08:11:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add idea for "disassemble" with source.
+
+Fri Oct 29 00:41:01 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.11.1 after release and cvs
+	tagging.
+
+Thu Oct 28 09:14:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add section on Mach.  Stop calling it a "bug list".
+	Remove John's name and email address.  Remove item on "always"
+	("hook-stop" takes care of this).  Remove item on executables with
+	no symbols (this works on some machines, at least).  Remove item
+	about calling error() during symbol reading (I think all the important
+	ones have been cleaned up).  Revise items about signals and remote
+	systems.  Remove section on ^Z requiring several continues to make
+	it go (this now works.  Perhaps the item is based on confusion over
+	programs (like GDB itself) which catch SIGTSTP and then re-send
+	themselves the signal.  PR 2575 might contain relevant info).
+
+Thu Oct 28 16:55:34 1993  Fred Fish  (fnf@cygnus.com)
+
+	* NEWS:  Note improvements in C++ support, preliminary thread
+	implementation, and LynxOS native and target support for 386.
+
+Thu Oct 28 16:55:34 1993  Fred Fish  (fnf@cygnus.com)
+
+	* README:  Add note from Peter Schauer about OSF/1 shared
+	libraries.  Add note from Pace Willisson about configuring on BSDI
+	BSD/386 release 1.0.  Update gdb references to gdb 4.11.
+
+Thu Oct 28 09:14:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* NEWS: Add notes about Alpha and "set remotedebug" for UDI.
+
+	* valops.c (value_assign): Change bitfield code to use a buffer of
+	the correct size, rather than an int.
+
+Wed Oct 27 13:43:07 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/{i386m3.mt,i386m3.mh},
+	config/mips/{mipsm3.mt,mipsm3.mh},
+	config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE
+	and XM_FILE.  Replace host files *mach3-xdep.o with native
+	files *m3-nat.o.  Replace host file os-mach3.o with native
+	file m3-nat.o.
+
+	* remote-udi.c: Remove LOG_FILE stuff; superceded by "set remotedebug".
+	* remote-mon.c: Remove commented out "set remotedebug" command.
+	* remote-nindy.c: Clean up comment about wanting alternative to
+	options specified on the GDB command line.
+
+	* fork-child.c (fork_inferior): Set inferior_pid before calling
+	init_trace_fun.  Move the code which gets us through the shell
+	to new function startup_inferior.
+	* inferior.h: Declare startup_inferior.
+	* procfs.c (procfs_init_inferior), inftarg.c (ptrace_him):
+	Call startup_inferior.
+	* m3-nat.c (m3_trace_him): Call intercept_exec_calls.
+	* config/nm-m3.h: Don't define STARTUP_INFERIOR.
+	* config/i386/tm-i386m3.h, config/ns32k/tm-ns32k.h,
+	config/mips/tm-mipsm3.h: Don't define START_INFERIOR_TRAPS_EXPECTED.
+
+	* m68k-stub.c: Change vector 13 from SIGFPE to SIGBUS.
+
+Tue Oct 26 22:05:03 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* mips-tdep.c (mips_pop_frame): If proc_desc is NULL, don't dump core.
+
+Tue Oct 26 15:07:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	gcc -Wall lint:
+	* nlmread.c: Include stabsread.h.
+	* Makefile.in: Update dependencies.
+
+	* remote.c: Change PBUFSIZ back to 400.  John's 28 Feb 1992 change
+	to increase it broke the ability to write large chunks of memory
+	with m68k-stub and i386-stub.  Now we only use more than 400 on
+	machines where we need that much to write the registers.
+	* remote.c (remote_write_bytes): Eliminate possible abort().  The
+	check for when to abort was off by a few bytes and besides which,
+	it is handled by MAXBUFBYTES, which the caller uses.
+	* m68k-stub.c: Add comments about trap #1 and trap #8 instructions.
+
+Tue Oct 26 08:36:07 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.h (SIM_ADDR): New type (same as CORE_ADDR).
+	(sim_set_pc): Update prototype.
+	(sim_read, sim_write): Ditto, and use unsigned char *buf.
+	(sim_fetch_register, sim_store_register): Use unsigned char *buf.
+	(sim_info): Pass printf function as argument, add verbose argument.
+	(sim_stop_reason): Renamed from sim_stop_signal, fix prototype.
+	* remote-sim.c (gdbsim_wait): Update call to sim_stop_reason.
+	(gdbsim_files_info): Update call to sim_info.
+
+Tue Oct 26 10:41:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (value_assign): Call reinit_frame_cache when assigning
+	to a register.
+
+Mon Oct 25 11:08:59 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Fix PC out of objfile bounds
+	check to just use stop_func_name == 0.
+	* remote-udi.c (store_register):  Invalidate NPC/PC_REGNUM after
+	changing PC.
+
+Mon Oct 25 14:57:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/{low-lynx.c,low-sparc.c,low-sun3.c}, standalone.c,
+	m3-nat.c, i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c: bcopy -> memcpy.
+
+	gcc -Wall lint:
+	* breakpoint.c: Include thread.h.
+	* coffread.c: Include stabsread.h.
+	* Makefile.in: Update dependencies.
+	* breakpoint.c (mention): Add bp_call_dummy to switch.
+	* symmisc.c (dump_symtab): Use %d not %ld for line number.
+
+Sun Oct 24 18:29:32 1993  Tom Lord  (lord@rtl.cygnus.com)
+
+	* every non-obsolete file except utils.c:
+	  Change the stream argument to _filtered to GDB_FILE *.
+	  Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
+	  Replace all calls to stdio output functions with
+	    calls to corresponding _unfiltered functions.
+	  Replaced calls to fopen for output to gdb_fopen.
+	  Added sufficient goo to utils.c and defs.h to make the above
+	  work.
+	  
+	  The net effect is that stdio output functions are only directly
+	  used in utils.c.  Elsewhere, the _unfiltered and _filtered 
+	  functions and GDB_FILE type are used.
+
+	  In the near future, GDB_FILE will stop being equivalant to 
+	  FILE.
+
+	  The semantics of some commands has changed in a very subtle way:
+	  called in the right context, they may cause new occurences of 
+	  prompt_for_continue() behavior.
+
+	  Please respect this change by not reintroducing stdio output 
+	  dependencies in the main body of gdb code.  All output from
+	  commands should go to a GDB_FILE.
+
+Sun Oct 24 20:16:38 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* parse.c, parser-defs.h (write_exp_msymbol):  New function to write
+	the appropriate expression for a minimal symbol.  Taken from c-exp.y
+	and m2-exp.y but handles mst_file_*.
+	* c-exp.y, m2-exp.y:  Use it.
+
+Sun Oct 24 09:31:05 1993  Fred Fish  (fnf@lisa.cygnus.com)
+
+	* elfread.c (elf_symtab_read):  Use bfd convention that both
+	initialized and uninitialized data sections have the SEC_ALLOC
+	flag bit set, but only initialized sections have SEC_LOAD set.
+	SEC_DATA is ignored since it only gets set for initialized 
+	data.
+
+Sat Oct 23 14:48:18 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.h (sim_stop): New enum.
+	(sim_stop_signal): Change prototype, result is enum sim_stop.
+	* remote-sim.c (gdbsim_wait): Update call to sim_stop_signal.
+
+Fri Oct 22 07:49:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (define_symbol): Skip the whole thing about "pcc
+	promotion" on little-endian machines.
+
+	* remote-vx.c (vx_wait): Rename pid parameter to pid_to_wait_for.
+	Some compilers (legitimately) don't like variables in the
+	function's outermost block whose name is the the same as the name of
+	a parameter.
+
+	Merge Apollo patches from Troy Rollo (troy@cbme.unsw.edu.au):
+	* dst.h, dstread.c, config/m68k/{apollo68b.mt,tm-apollo68b.h}:
+	New files.
+	* config/m68k/nm-apollo68b.h: Add more defines.
+	* configure.in: Recognize apollo target, not just host.
+
+	* configure.in: Add * to end of all OS names.
+
+Fri Oct 22 06:14:01 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (ALLPARAM):  Add config/m88k/xm-delta88v4.h
+
+Thu Oct 21 12:23:12 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (init.c): Generate using the source, not munch.  This
+	cleans up all kinds of hassles (which nm to use in munch, etc).  The
+	new formatting conventions (mostly already followed) are that
+	the name of the _initialize_* routines must start in column zero,
+	and must not be inside #if.
+	* munch: Removed.
+	* Makefile.in: Remove references to munch.
+	* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
+	alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
+	procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
+	i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
+	z8k-tdep.c: Make sure the above conventions are followed.  Make
+	sure they are all declared as returning void.  Clean up
+	miscellaneous comments and such.
+
+	* sh-tdep.c (sim_load): Add function.
+
+Thu Oct 21 15:58:48 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* remote-mips.c (mips_wait): add pid argument.
+
+Thu Oct 21 12:23:12 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts
+	which no longer occur.
+
+	gcc -Wall lint:
+	* findvar.c (symbol_read_needs_frame), corelow.c (ignore),
+	inflow.c (gdb_has_a_terminal): Make sure to return a value.
+	* regex.h: Declare re_set_syntax.
+	* printcmd.c: Include valprint.h.
+	* infcmd.c, exec.c, maint.c, core.c: Include language.h.
+	* maint.c: Include expression.h.
+	* infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h.
+	* inftarg.c: Include command.h.
+	* coredep.c: Include value.h.
+	* c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h.
+	* ch-typeprint.c: Include typeprint.h.
+	* ch-valprint.c: Include c-lang.h.
+	* nlmread.c: Include buildsym.h.
+	* environ.c: Include gdbcore.h.  Only include defs.h once.
+	(set_in_environ): Cast const char * to char * when passing to
+	set_gnutarget.
+	* Makefile.in: Update dependencies to reflect all these new includes.
+	Remove unused variables:
+	* printcmd.c (printf_command): args_to_vprintf.
+	* coffread.c (coff_symfile_init): strsection.
+	Move variables to within the #ifdefs where they are used:
+	* symtab.c (gdb_mangle_name): opname.
+	* inftarg.c (child_attach): pid and exec_file.
+	* inftarg.c (child_detach): siggnal.
+	* objfiles.c (allocate_objfile): mapto, md, and fd.
+	* objfiles.c (free_objfile): mmfd.
+	* infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch.
+	* infrun.c (wait_for_inferior): Remove unused same_pid label.
+	* inferior.h: Declare set_sigint_trap and clear_sigint_trap.
+	* parser-defs.h: Declare write_exp_elt_block.
+	* stabsread.h: Declare elfstab_offset_sections and
+	coffstab_build_psymtabs.
+
+Thu Oct 21 12:05:08 1993  Ken Raeburn  (raeburn@cygnus.com)
+
+	Patch from Jeff Law:
+	* paread.c: Fix references to "hppa" that should now be "som".
+
+Thu Oct 21 12:23:12 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (decode_line_1): Don't use SYMBOL_LINE for functions.
+
+Thu Oct 21 02:59:07 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* remote-udi.c (udi_store_registers, store_register):  Use
+	UDI29KPC address space when modifying PC.  It seems that you can't
+	modify the PC directly (at least in the isstip simulator).
+
+Wed Oct 20 11:35:43 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.h: Put remote_debug declaration back here.  Add baud_rate.
+	* remote.c, remote-udi.c, remote-utils.h: Let target.h take care of
+	declaring these.  Those random externs all over are error prone.
+	* Move "set remotebaud" from remote-utils.c to main.c to it applies
+	to remote.c as well.
+
+	* xcoffread.c (xcoff_symfile_read), coffread.c (coff_symfile_read):
+	Sort symtabs for this objfile only, not for all objfiles.
+	* symfile.c, symfile.h (sort_all_symtab_syms): Remove; no longer used.
+
+	* mipsread.c (parse_symbol): In third-eye, a function has a block
+	within it which represents the whole function.  Create only one
+	GDB block for both.
+
+Wed Oct 20 17:47:42 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* main.c:  Make baud_rate and remote_debug be global variables,
+	remove #include "remote-utils.h".  This makes it possible to build
+	GDB without remote-utils.c.  Also, move setting of remote_debug
+	into main, so that all remote*.c files can use it (not just the
+	serial line ones).  And, make baud_rate be an int.
+	* remote-udi.c:  Change kiodebug to remote_debug.
+	* remote-utils.c:  Move setting of baud rate and debug into main.c.
+	* remote-utils.h:  Redefine sr_{get set}_debug and sr_{get set}_baud
+	to use baud_rate and remote_debug globals for compatibility.
+	* remote.c:  Use remote_debug and baud_rate globals directly,
+	instead of sr_ functions, so that we don't need to load
+	remote-utils.c.
+	* config/a29k/a29k-udi.mt:  Define REMOTE_O as null so that we don't
+	get the default remote* modules.
+
+Wed Oct 20 11:35:43 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (define_symbol): When combining a LOC_ARG and a
+	LOC_REGISTER, use the type from the LOC_REGISTER, not from the
+	LOC_ARG.
+
+Wed Oct 20 14:34:38 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* config/i386/xm-go32.h: define some signals if they aren't
+	  already defined.
+
+Wed Oct 20 11:35:43 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (INTERNAL_LDFLAGS): New macro.  The new part is
+	that we use CFLAGS and PROFILE_CFLAGS to link.
+	(gdb, rapp, kdb): Use INTERNAL_LDFLAGS instead of
+	LDFLAGS and/or GLOBAL_CFLAGS.
+
+Wed Oct 20 09:29:55 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Add $(srcdir) to all refs to 29k-share
+	directories.
+
+Tue Oct 19 17:23:34 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (ALLCONFIG):  Add config/i386/{i386m3.mh, i386m3.mt,
+	i386/i386mk.mh i386/i386mk.mt}, config/mips/{mipsm3.mh,
+	mipsm3.mt}, config/ns32k/{ns32km3.mh, ns32m3.mt}
+	* Makefile.in (remote_utils_h):  Add remote-sim.h
+	* Makefile.in (NONSRC):  Add i386-nlmstub.c
+	* Makefile.in (HFILES):  Add coff-solib.h
+
+Tue Oct 19 14:15:40 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* values.c (value_virtual_fn_field): Fix the offset calculation
+	when calling virtual functions. (gdb.t22/virtfunc.exp).
+	* eval.c (evaluate_subexp): same as above.
+
+Tue Oct 19 10:43:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/rs6000/rs6000.mh (TERMCAP): Define to -lcurses.
+
+	* Makefile.in: Define CXXFLAGS.
+
+Tue Oct 19 09:28:52 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* sparclite/Makefile.in:  Fixup so that this works with Sun make
+	and VPATH.
+
+Tue Oct 19 10:43:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.h (struct bpstat_what): Don't use bitfields.
+
+	* typeprint.c: Add "class CLASS-NAME" to docstring for ptype.
+
+Tue Oct 19 06:17:10 1993  Fred Fish  (fnf@cirdan.cygnus.com)
+
+	* Makefile.in (ALLPARAM):  Add config/m88k/{nm-delta88v4.h,
+	tm-delta88v4.h, xm-dgux.h}.
+	* Makefile.in (ALLCONFIG):  Add config/m88k/{delta88v4.mh,
+	delta88v4.mt}.
+
+	* README:  Remove comment about SunOS 5.x programs leaving
+	coredumps.  Info from Sun is that this was not in customer
+	releases.
+
+Mon Oct 18 10:28:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* hppa-tdep.c (restore_pc_queue): Call target_terminal_ours after
+	done stepping the inferior.
+
+	* c-exp.y: Remove never-used (because of shift/reduce conflicts)
+	rules for pointers to members.
+	* Makefile.in: Remove notice about expected shift/reduce conflicts.
+
+	* buildsym.c (finish_block): If we pop the context stack and it is
+	not empty, complain () instead of abort ().
+
+Sun Oct 17 19:42:31 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* parse.c, parser-defs.h (follow_types): New function.
+	* c-exp.y (ptype : typebase abs_decl): Use it.
+	* c-exp.y (ptype): Add support for type qualifiers after the
+	typebase.  The typebase rule already has support for them before
+	the typebase.
+	* Makefile.in: Change the expected number of shift/reduce
+	conflicts to 6.  This is OK--the 2 new conflicts are basically the
+	same as one of the old ones.
+
+Sun Oct 17 13:04:49 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.10.3.
+
+Sun Oct 17 09:18:57 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Clean up comments which were at
+	the top of the file, making them more concise and moving them with
+	the code (Sorry, Randy, but these stream-of-consciousness comments
+	really have to go).  Switch the order of the "&&", which makes
+	things clearer and turns out to be an improvement with respect to
+	side effects and speed.
+
+Sun Oct 17 02:06:01 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* procfs.c:  Handle process exits more elegantly by trapping on
+	entry to _exit.  Also, cleanup procinfo list when process dies of
+	it's own accord (as opposed to being killed).
+
+Sat Oct 16 20:47:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m88k/xm-dgux.h: Define NO_PTRACE_H.
+
+	* corelow.c (add_to_thread_list): Need a cast to go from PTR to
+	asection *.
+
+	* infrun.c: Add comment about signals.
+
+	* fork-child.c (fork_inferior): Remove CREATE_INFERIOR_HOOK again.
+	Stu reinstated it (accidently I assume).
+
+Sat Oct 16 15:27:10 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* procfs.c (procfs_wait):  Losing Unixware can't do poll on /proc
+	files.  Use PIOCWSTOP instead.
+	* corelow.c (add_to_thread_list):  Fix arg to match prototype.
+
+	* procfs.c (procfs_set_sproc_trap):  Don't use this if sproc
+	isn't available.
+	* (procfs_notice_signals):  Fix prototype.
+
+Fri Oct 15 22:46:07 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* breakpoint.c (breakpoint_thread_match break_command_1):
+	Thread-specific breakpoint support.
+	* breakpoint.h (struct breakpoint):  Add thread id field.
+	* fork-child.c (fork_inferior):  Move call to init_thread_list()
+	back a bit so that init_trace_fun can do thread functions.
+	* hppa-tdep.c (restore_pc_queue):  Add pid to call to target_wait.
+	* hppab-nat.c (child_resume):  Handle default pid.
+	* hppah-nat.c (child_resume):  Handle default pid.
+	* i386lynx-nat.c (child_wait):  New arg pid.
+	* inflow.c (kill_command):  Reset thread list.
+	* infptrace.c (child_resume):  Handle default pid.
+	* infrun.c:  Thread-specific breakpoint support.
+	* inftarg.c (child_wait):  Add pid arg.
+	* osfsolib.c (solib_create_inferior_hook):  Add pid to call to
+	target_resume.
+	* procfs.c:  Multi-thread support.
+	* remote-bug.c (bug_wait):  Add pid arg.
+	* remote-hms.c (hms_wait):  Add pid arg.
+	* remote-mips.c (mips_wait):  Add pid arg.
+	* remote-mon.c (monitor_wait):  Add pid arg.
+	* remote-nindy.c (nindy_wait):  Add pid arg.
+	* remote-sim.c (gdbsim_wait):  Add pid arg.
+	* remote-udi.c (udi_wait):  Add pid arg.
+	* remote-vx.c (vx_wait):  Add pid arg.
+	* remote-z8k.c (sim_wait):  Add pid arg.
+	* remote.c (remote_wait):  Add pid arg.
+	* solib.c (solib_create_inferior_hook):  Add pid to call to
+	target_resume.
+	* target.h (struct target_ops):  Add pid arg to to_wait and
+	to_notice_signals.
+	* thread.c (valid_thread_id):  New func to validate thread #s.
+	* (pid_to_thread_id):  New func to do the obvious.
+	* thread.h:  Prototypes for above.
+
+	* coff-solib.c (coff_solib_add):  Use nameoffset field to locate
+	filename.
+
+Fri Oct 15 21:29:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* h8300-tdep.c, h8500-tdep.c: Define sim_load only, but not
+	sim_kill, sim_open, or sim_set_args.
+
+	* stack.c (print_stack_frame): Put catch_errors around
+	print_frame_info so (for example) error printing source doesn't
+	cause auto-displays to get skipped in normal_stop.
+
+	* findvar.c (value_from_register): When preparing to cast a value
+	from REGISTER_VIRTUAL_TYPE to type, copy the REGISTER_VIRTUAL_SIZE;
+	the old code didn't copy the whole thing.
+	* valops.c (value_assign): Add comment.
+
+Fri Oct 15 12:57:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (upgrade_type):  Replace bitsize sanity checks and
+	complaint by a comment explaining why they were useless. 
+
+Fri Oct 15 14:30:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Move comments on bypassing call dummy breakpoint from stack.c
+	to breakpoint.h.
+
+Fri Oct 15 11:52:56 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (lookup_partial_symtab):  If filename is not found and
+	contains no slashes, try again and compare without leading path
+	components.
+	* symtab.c (lookup_symtab_1):  Replace open coded version of
+	lookup_partial_symtab with a function call.
+
+Thu Oct 14 20:34:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* fork-child.c (fork_inferior), remote-eb.c (eb_create_inferior),
+	remote-mon.c (monitor_create_inferior), remote-nindy.c
+	(nindy_create_inferior), remote-st.c (st2000_create_inferior),
+	remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
+	is replaced by init_trace_fun.
+	* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
+	how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
+	port.
+
+	* Makefile.in: Add Mach files to ALLDEPFILES, etc.
+	* m3-nat.c: Clean up more hair--message(), cprocs.
+	* configure.in: Recognize Mach targets and hosts.
+	* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
+	include this file.
+	* Mach headers in config/*/tm-*.h: Fix includes to match correct
+	locations of files.
+
+Thu Oct 14 21:35:55 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* remote-mon.c (general_open): Set dev_name. Minor tweaking to get
+	it working again.
+	* config/m68k/tm-monitor.h: Remove floating point register names
+	as there aren't any on any of the monitors that use this code.
+
+Wed Oct 13 11:47:23 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* inflow.c: Pass pointer to process group, not process group itself,
+	to TIOCSPGRP ioctl.
+
+	* inflow.c (terminal_ours_1): Don't print warning on failure to
+	set process group.
+
+	* printcmd.c (printf_command): Instead of using makeva* and
+	calling vprintf, just make the appropriate calls to printf.
+	* printcmd.c, config/pa/xm-pa.h, config/mips/xm-makeva.h,
+	config/alpha/xm-alpha.h, config/m88k/xm-m88k.h: Remove all
+	traces of makeva*.  My apologies to everyone (including me!)
+	who spent so much time getting it to work on various machines,
+	but look at the bright side, at least you won't have to do it
+	again in the future.
+
+	* printcmd.c (printf_command): Make a cleanup for val_args (fixes
+	a memory leak).
+
+Tue Oct 12 22:54:41 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/xm-mips.h: Remove comment about HAVE_SGTTY vs. usleep.
+
+Tue Oct 12 12:01:29 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* configure.in: only configure gdbserver for native environments
+
+Tue Oct 12 08:59:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (read_type): Treat a negative type number at the start
+	of a type as a type reference, not as a definition of a type with
+	"50=" omitted.  This makes things work on the RS/6000 again (the
+	14 Sep 1993 change broke it).
+
+	* inflow.c: Use 0 (standard input) not scb->fd.
+	(terminal_ours_1): If printing warning, don't claim it happened in
+	terminal_inferior.
+
+	* blockframe.c (get_prev_frame_info): Don't error() if there are no
+	frames; just return NULL.
+
+	* xcoffsolib.h, xcoffexec.c: Undo the part of Fred's bfd->abfd
+	change which involved structure elements.  It was unnecessary and
+	was not consistently done.
+
+	* stabsread.h, stabsread.c, dbxread.c (common_block*, copy_pending):
+	Move common block handling from dbxread.c to stabsread.c.
+	Use the name from the BCOMM instead of the ECOMM.
+	Allocate things on the symbol_obstack.
+	* xcoffread.c (process_xcoff_symbol): Process C_BCOMM, C_ECOMM,
+	and C_ECOML.  On unrecognized storage classes, go ahead and call
+	define_symbol (after the complaint).
+
+	* dbxread.c (process_one_symbol): Don't relocate 'S' symbols by
+	the text offset.
+
+Tue Oct 12 12:33:09 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* osfsolib.c (solib_create_inferior_hook):  Reset stop_soon_quietly
+	after shared library symbol reading to get rid of warning from
+	heuristic_proc_start.
+
+Tue Oct 12 12:01:29 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* remote-sim.c: fix unterminated character string
+
+Tue Oct 12 08:59:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c: Fix comment about gcc 2.3.3 stab for long long int.
+
+Mon Oct 11 14:27:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m3-nat.c, config/nm-m3.h: Add a target_ops struct and other
+	various things to try to get this to work.
+
+	* symtab.h: Fix comments re headers, sharing blockvectors, etc.
+
+Mon Oct 11 11:46:06 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* config/i960/vxworks960.mt (REMOTE_O): add dcache.o and remote-utils.o
+
+Mon Oct 11 02:48:57 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_partial_symbols):  Do not add undefined
+	symbols to the partial symbol table.
+	* alpha-tdep.c (init_extra_frame_info):  Remove kludge for gcc,
+	gcc has to be compatible with the native tools.
+	* alpha-tdep.c (alpha_push_arguments):  Rename NUM_ARG_REGS to
+	ALPHA_NUM_ARG_REGS and move its definition to tm-alpha.h.
+	* config/alpha/tm-alpha.h (FRAME_ARGS_ADDRESS):  Change it to the
+	way the native tools define it, update comment.
+
+Fri Oct  8 15:54:06 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* osfsolib.c, remote-sim.c, remote.c, solib.c, xcoffexec.c, 
+	xcoffsolib.h:  Use 'abfd' for bfd variables instead of 'bfd'.
+	Sun cc doesn't like variable names that match their typedef'd type.
+
+Fri Oct  8 14:56:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* inflow.c: Remove unused includes of sys/param.h and sys/types.h.
+
+	* inflow.c, ser-unix.c, ser-go32.c, ser-tcp.c, serial.h,
+	terminal.h, fork-child.c, main.c, utils.c: Move all the process
+	group stuff back to inflow.c and terminal.h; that's a better place
+	for it and fixes problems with trying to get/set the process group
+	of a tty we're doing remote debugging on.
+	* terminal.h: Skip the redefines and includes if HAVE_TERMIOS.
+
+	* findvar.c, value.h (symbol_read_needs_frame): New function.
+	* c-exp.y, m2-exp.y: Call it instead of having our own switch on
+	the symbol's class.
+	* valops.c (value_of_variable): Use symbol_read_needs_frame to
+	decide whether we care about finding a frame.
+
+Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (get_frame_block):  Do not adjust pc if the frame
+	function was interrupted by a signal.
+
+Thu Oct  7 19:20:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/h8300/tm-h8300.h: Don't define sr_get_debug.
+	* remote-sim.c: Include remote-utils.h.
+	* target.h: Add comment about target_has_execution.
+
+Thu Oct  7 16:14:19 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
+
+	* h8300-tdep.c (sim_load, sim_kill, sim_open, sim_set_args):
+	New functions.
+	* infrun.c (normal_stop): Don't try and set the pc in the current
+	frame coredump if there isn't one.
+	* remote-sim.c (gdbsim_store_register): Don't
+	SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order.
+	(gdbsim_wait): Set status with WSETSTOP.
+	* config/h8300/tm-h8300.h (sr_get_debug): Define
+
+Thu Oct  7 12:56:57 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	New Mach stuff:
+	* config/i386/i386mach.c: Explain this is for the old (probably
+	non-functional and/or obsolete) Mach stuff.
+	* m3-nat.c, config/nm-m3.h,
+	i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
+	config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
+	config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
+	config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
+	config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
+	New files.
+
+	* blockframe.c (find_pc_partial_function): If we call
+	PSYMTAB_TO_SYMTAB, call target_terminal_ours_for_output first.
+	This is needed now that wait_for_inferior passes in endaddr.
+	* infrun.c: Move call to target_terminal_inferior from proceed
+	to resume.
+
+Thu Oct  7 09:22:04 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* blockframe.c (find_pc_partial_function):  Fix handling for PCs
+	beyond the end of the last function in an objfile.
+	* coff-solib.c (coff_solib_add):  Use BFD to get fields from .lib
+	section.
+	* infrun.c (wait_for_inferior):  Modify test for subroutine entry
+	to include pc out of bounds of the previous function.
+	* remote.c (remote_wait):  Use strtoul for parsing 'N' message.
+	Add code to relocate symfile_objfile->sections.
+
+Thu Oct  7 06:22:43 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/sparc/sun4os4.mh: Add comment saying why we don't use
+	-lresolv.
+
+Thu Oct  7 09:29:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c, breakpoint.h (breakpoint_init_inferior):  New function
+	that clears the `inserted' flag for all breakpoints and deletes
+	any breakpoints which should go away between runs of programs.
+	* inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
+	remote-es.c (es1800_load), comments in exec.c and corelow.c:
+	Use it instead of mark_breakpoints_out.
+	* breakpoint.c (mark_breakpoints_out):  Update comment, tm-rs6000.h
+	uses it in a completely different context.
+	* breakpoint.c (breakpoint_re_set_one):  Add bp_call_dummy case.
+
+Thu Oct  7 09:29:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* Makefile.in (REGEX, REGEX1):  Always use our own version of
+	regex.c to be consistent across hosts.
+	* source.c (_initialize_source):  Initialize regex to use grep
+	style syntax as an approximation to POSIX basic regex syntax.
+
+Wed Oct  6 12:43:47 1993  Jeffrey A Law  (law@snake.cs.utah.edu)
+			  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* hppa-tdep.c (frame_chain): Rework so that it correctly
+	handles boundaries where code with a frame pointer calls code
+	without a frame pointer.
+	(dig_fp_from_stack): New function.
+
+Wed Oct  6 12:43:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (delete_breakpoint): Don't insert a disabled breakpoint.
+
+	* README: Add Alpha notes from Schauer.
+
+Tue Oct  5 15:26:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (install, uninstall): Remove $$n.1 stuff; I don't
+	understand what it is trying to do, but I suspect it's not doing
+	it.
+
+	* config/ns32k/merlin.mh: Add comment about M_INSTALL.
+	* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
+	M_UNINSTALL; it tries to install a non-existent file gdb.z.
+	* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
+
+	* stabsread.c (read_range_type): Remove comment which recommends
+	distinguishing float from complex by the name.
+
+Tue Oct  5 12:17:40 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  Jim Kingdon  (kingdon@cygnus.com)
+			  Stu Grossman  (grossman@cygnus.com)
+
+	Changes to support alpha OSF/1 in native mode.
+	* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
+	  config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
+	New files.
+	* Makefile.in:  Add new files and dependencies.
+	* configure.in:  Add alpha target.
+	* config/alpha/alpha-osf1.mh (NATDEPFILES):  Add osfsolib.o
+	* config/alpha/alpha-osf1.mh (MH_CFLAGS):  Remove, we can handle
+	shared libraries now.
+	* config/alpha/xm-alpha.h:  Cleanup, get MAKEVA_* defines right.
+
+	* defs.h (CORE_ADDR):  Make its type overridable via CORE_ADDR_TYPE,
+	provide `unsigned int' default.
+	* breakpoint.c (breakpoint_auto_delete):  Delete only if we really
+	stopped for the breakpoint.
+	* stabsread.c, stabsread.h (define_symbol):  Change valu parameter
+	to a CORE_ADDR.
+	* stabsread.c (read_range_type):  Handle the case where the lower
+	bound overflows and the upper doesn't and the range is legal.
+	* infrun.c (resume):  Do not step a breakpoint instruction if
+	CANNOT_STEP_BREAKPOINT is defined.
+
+	* inferior.h (CALL_DUMMY_LOCATION):  New variant AT_ENTRY_POINT.
+	Now that we have the bp_call_dummy breakpoint the call dummy code
+	is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
+	FIX_CALL_DUMMY can be used to set up everything for the dummy.
+	The breakpoint for the dummy is set at the entry point and thats it.
+	* blockframe.c (inside_entry_file, inside_entry_func):  Do not stop
+	backtraces if pc is in the call dummy at the entry point.
+	* infcmd.c (run_stack_dummy):  Handle AT_ENTRY_POINT case. Use
+	the expected breakpoint pc when setting up the frame for
+	set_momentary_breakpoint.
+	* symfile.c (entry_point_address):  New function for AT_ENTRY_POINT
+	support.
+	* valops.c (call_function_by_hand):  Handle AT_ENTRY_POINT case.
+
+Tue Oct  5 11:37:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
+	Change other hppa host entries to use -*- not -hp-.
+
+Mon Oct  4 19:16:14 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* i386-nlmstub.c: New file; debugging stub for i386 NetWare.  Must
+	be compiled with NetWare header files and turned into an NLM with
+	nlmconv.
+
+Mon Oct  4 11:02:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* minsyms.c (lookup_minimal_symbol_by_pc): Don't use mst_abs symbols.
+
+	* dbxread.c (process_one_symbol): Make n_opt_found static.
+
+	* Rename i386lynx-tdep.c to i386ly-tdep.c for 14 character file names.
+	* Makefile.in, config/i386/i386lynx.mt: Change accordingly.
+
+	* values.c (record_latest_value): Fetch lazy values and set VALUE_LVAL
+	to not_lval.
+
+Sun Oct  3 15:54:51 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	* objfiles.h (objfile): New slot sym_stab_info, use by most
+	stab-reading formats.
+	* gdb-stabs.h (DBX_SYMFILE_INFO): Access sym_stab_info instead of
+	sym_private.
+	* coffread.c (coff_symfile_init): Alloc struct for sym_stab_info.
+	* dbxread.c, elfread.c, paread.c: Change sym_private references to
+	sym_stab_info references.
+
+Sat Oct  2 19:28:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mipsread.c, objfiles.c, utils.c: Use PTR not void *.  RISC/OS
+	4.02 lacks void *.
+	* elfread.c: Use void * not PTR inside PARAMS.
+
+	* config/mips/news-mips.mh: Remove coredep.o; mips-nat.o does it.
+	* config/mips/news-mips.mh: Define NAT_FILE not NM_FILE.
+	* config/mips/nm-news-mips.h: Include mips/nm-mips.h not nm-mips.h.
+
+Sat Oct  2 16:05:22 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in, coff-solib.c, coff-solib.h, i386lynx.mt,
+	tm-i386lynx.h:  Add support for SVR3 COFF shared libraries.
+
+Sat Oct  2 15:50:41 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m88k-nat.c (store_inferior_registers): When writing all registers,
+	don't try to write EXIP_REGNUM or ENIP_REGNUM (not needed for this
+	case, and they cause trouble).
+
+	* TODO: Don't suggest doing fast watchpoints by stepping a line
+	at a time.  That would be really hairy and still not fast enough.
+	Do suggest debug registers and page table diddling.
+
+Fri Oct  1 14:54:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (do_examine): Make meaning of 'h', 'w', and 'g' not
+	depend on builtin_type_*.  Instead, it is always 2, 4, and 8 bytes
+	like the documentation says.
+	* printcmd.c (decode_format) [CC_HAS_LONG_LONG]: Remove 'l' as
+	synonym for 'g'.  This was never documented, it shouldn't depend on
+	CC_HAS_LONG_LONG, and I don't see what's wrong with 'g'.
+
+Fri Oct  1 10:06:35 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* symtab.c: fix a bug in testsuite (virtfunc.exp)
+
+Thu Sep 30 11:30:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m88k-nat.c (fill_gregset): Fix typo (R_SFIP -> R_FIP).
+
+	* c-typeprint.c (c_type_print_base, TYPE_FN_FIELD_STUB code):
+	If demangled name lacks a colon, don't dump core.
+
+	* blockframe.c (find_pc_partial_function): If pst->readin is
+	set, don't try to get symbols from pst.
+
+	* inflow.c (generic_mourn_inferior): Call reinit_frame_cache
+	instead	of doing it ourself.
+	* blockframe.c (reinit_frame_cache): Use code which was in
+	generic_mourn_inferior so we can use this function even when
+	we have switched targets.
+	* corelow.c (core_detach): Call reinit_frame_cache.
+	* target.c (target_detach): Don't call generic_mourn_inferior
+	(revert yesterday's change, now handled by core_detach).
+	* objfiles.c (free_objfile): Detach any core file if we call
+	SOLIB_CLEAR.  #include target.h.
+
+	* fork-child.c (fork_inferior): Don't call target_terminal_init
+	and target_terminal_inferior until we are sure that the inferior
+	has called gdb_setpgid.  This fixes PR 2900 (Schauer tracked it
+	down and was able to reliably reproduce it by putting a sleep()
+	before the gdb_setpgid()).
+
+Thu Sep 30 12:00:49 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-exp.y, m2-exp.y:  Change type of address for msymbol to
+	builtin_type_long.
+	* infptrace.c (fetch_register, store_inferior_register,
+	child_xfer_memory):  Use PTRACE_XFER_TYPE for the type of ptrace
+	transfers. Provide an `int' default for PTRACE_XFER_TYPE.
+
+Thu Sep 30 11:30:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h (TARGET_*_BIT): Don't use host information (sizeof) in
+	picking defaults.
+
+	* cp-valprint.c (cp_is_vtbl_ptr_type): Continue to accept old form.
+
+Thu Sep 30 11:25:55 1993  Kung Hsu  (kung@cygnus.com)
+
+	* cp-valprint.c (cp_is_vtbl_ptr_type):
+	change vtable field name to __vtbl (pr2695).
+
+	* symtab.c (gdb_mangle_name): fix a bug, to get mangled name right.
+
+Wed Sep 29 18:34:22 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Add deps for i386lynx-nat.o and i386lynx-tdep.o to
+	keep non-gnu makes happy.
+
+Wed Sep 29 17:20:54 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hpux_symtab): When a K_END is found for a
+	K_MODULE, clear the have_module and have_name flags.
+
+Wed Sep 29 10:52:19 1993  Kung Hsu  (kung@cygnus.com)
+
+	* c-valprint.c: to fix virtual table print bug (pr2695).
+
+Wed Sep 29 10:52:19 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c (target_detach): Call generic_mourn_inferior.
+	* inflow.c (generic_mourn_inferior): Call flush_cached_frames.
+
+Tue Sep 28 23:08:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c, coffread.c, elfread.c: A few changes to comments.
+
+Tue Sep 28 18:39:37 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	* configure.in: Rename ...-lynx* to ...-lynxos*.
+	Add m68*-*-lynxos* configuration.
+	* dbxread.c (coffstab_build_psymtabs): New function,
+	interfaces coffread.c to dbxread functions.
+	* coffread.c (coff_symfile_info):  Expand to include
+	dbx_symfile_info slots.
+	(coff_symfile_init): Init coff_symfile_info struct.
+	(coff_locate_sections): New functions, finds the stab and stabstr
+	sections.
+	(coff_symfile_read): Call coffstab_build_psymtabs if a stab
+	section is present.
+	(coff_section_offsets): Replace fake version with real offsets.
+
+Tue Sep 28 18:00:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c (run_stack_dummy): Set the frame in the bp_call_dummy
+	breakpoint.
+
+Tue Sep 28 17:53:26 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* config/nm-sysv4.h: Include solib.h.  Define SVR4_SHARED_LIBS.
+	* config/tm-sysv4.h: Don't include solib.h.
+	* config/xm-sysv4.h: Don't define SVR4_SHARED_LIBS.
+	* config/i386/i386v4.mt (TDEPFILES): Move solib.o from here...
+	* config/i386/i386v4.mh (NATDEPFILES): ...to here.
+	* config/i386/nm-i386v4.h: Include nm-sysv4.h.
+	* config/m68k/amix.mt (TDEPFILES): Move solib.o from here...
+	* config/m68k/amix.mh (NATDEPFILES): ...to here.
+
+Tue Sep 28 09:45:38 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES.
+
+	Clean up problems with targets and hosts that have 64 bit longs
+	and pointers and 32 bit ints.
+	* breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c,
+	ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c,
+	expprint.c, gdbtypes.c, infcmd.c, language.c, language.h,
+	m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h,
+	printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c,
+	symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+	Change all printf formats from %x to %lx if outputting an address.
+	Change la_*_format to use long format.
+	local_hex_string, local_hex_string_custom now take an unsigned long
+	argument, change all callers.
+	* coffread.c (read_coff_symtab):  Remove superfluous cast for
+	complaint output.
+	* dbxread.c (end_psymtab):  Cast MSYMBOL_INFO to long, not int.
+	* findvar.c, value.h (write_register):  Change val to LONGEST.
+	* gdbtypes.h (struct type):  Change `bitsize' to long as
+	TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer.
+	* inferior.h (struct inferior_status):  Change type of stop_pc to
+	CORE_ADDR.
+	* language.h (local_octal_string, local_octal_string_custom):
+	Remove prototype, the functions are neither defined nor used.
+	* mipsread.c (parse_symbol):  Use temporary variable for bitsize as
+	f->bitsize is a long now.
+	* objfiles.c (add_to_objfile_sections, build_objfile_section_table):
+	Use unsigned long casts instead of int for abusing sections_end
+	pointer as integer.
+	* stack.c (parse_frame_specification):  Change type of `args' to
+	CORE_ADDR for SETUP_ARBITRARY_FRAME.
+
+	* printcmd.c (make_vasize):  Allow redefinition via MAKEVA_SIZE.
+	* mipsread.c (parse_type):  Alpha cc now supports the t->continued
+	bit, update algorithm to match the way the compiler uses it.
+
+Tue Sep 28 12:05:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (fprintfi_filtered): Fix comments.
+
+Mon Sep 27 18:10:08 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* coffread.c (read_coff_symtab):  Don't call getfilename if there
+	are no auxents.
+
+Mon Sep 27 10:22:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (find_pc_line): Fix comments.
+
+	* remote-udi.c (udi_mourn): Don't pop target.
+
+Fri Sep 24 17:25:41 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* corelow.c:  Add multi thread/process support for core files with
+	.reg/XXX pseudo-sections.
+	* i386lynx-nat.c thread.h thread.c:  Remove unnecessary core file
+	support.
+
+Thu Sep 23 10:49:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c (download): Skip zero length sections.
+
+	* valops.c (search_struct_method, value_struct_elt):
+	Use (value)-1, not -1, for error.
+
+	* infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments
+	about SHIFT_INST_REGS.
+
+	* exec.c (exec_file_command): Set text_end based on all code readonly
+	sections, not just ".text".
+
+	* defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h,
+	config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+	z8k-tdep.c: Remove all references to ADDR_BITS_SET.
+	* config/m88k/tm-m88k.h: Define TARGET_WRITE_PC.
+
+	* config/m88k/tm-m88k.h, m88k-tdep.c: Add call function stuff.
+
+Thu Sep 23 00:13:06 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-mips.h (STORE_STRUCT_RETURN):  Define as noop as
+	the pushing of the struct return address is already handled in
+	mips_push_arguments.
+	* mips-tdep.c (reinit_frame_cache_sfunc):  Fix typo in prototype
+	declaration.
+	* mipsread.c (parse_symbol, parse_type, upgrade_type):  Add more
+	sanity checks for corrupt symbol entries to avoid core dumps
+	reported by benson@odi.com. Obviously Ultrix 4.3A cc now has
+	the same problems as the OSF/1 alpha cc.
+	* mipsread.c (parse_lines):  Iterate over the range of the compressed
+	line number entries, the old iteration sometimes failed to stop
+	and wrote past the end of the LINETABLE. Add sanity check to avoid
+	the same problem in case the line number info is corrupt.
+	* mipsread.c (parse_procedure):  Adjust pdr for alpha __sigtramp.
+	* mipsread.c (parse_external, parse_partial_symbols):  Ignore stNil
+	symbols that are produced for statics in .o files and stLocal symbols
+	that are produced for every section in OSF/1 dynamically linked
+	 executables.
+	* mipsread.c (psymtab_to_symtab_1):  Put out `undefined symbols'
+	warning only under `verbose on' as there are many undefined symbols
+	in a dynamically linked executable.
+
+Wed Sep 22 10:28:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i960/nindy960.mt: Don't define REMOTE_O; REMOTE_O was
+	intended only for VxWorks.  Remove dcache.o from TDEPFILES now
+	that we pick it up from the default REMOTE_O.
+
+	* breakpoint.c (bpstat_what): Initialize retval.call_dummy and
+	retval.step_resume.
+
+	* mips-tdep.c (mips_frame_chain): If frame size zero, return zero.
+	* rs6000-tdep.c: Add comment about framelessness.
+
+	* remote-nindy.c: Declare ninMemGet and ninMemPut.
+
+Wed Sep 22 08:02:57 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Add i386lynx-tdep to the right places.
+	(TARDIRS):  Add gdbserver.
+
+	* exec.c (print_section_info):  Print entry point.
+	* i386lynx-nat.c (i386lynx_saved_pc_after_call):  Move into
+	i386lynx-tdep.c.  Add core file support.
+	* i386lynx-tdep.c:  New module for Lynx/386 target dependant code.
+	* maint.c:  Add `maint info sections' command to print info about all
+	sections that BFD knows about for exec and core files.
+	* sparc-tdep.c (sparc_push_dummy_frame):  Update stack pointer
+	before putting frame on the stack.  Consolidate writes to reduce
+	traffic for remote debugging.
+	* config/i386/i386lynx.mh (NATDEPFILES):  Remove exec.o.
+	* config/i386/i386lynx.mt (TDEPFILES):  Add exec.o, i386lynx-tdep.o.
+	* config/i386/nm-i386lynx.h:  Add target_pid_to_str().
+	* config/i386/tm-i386lynx.h:  Remove target_pid_to_str().
+	* sparclite/Makefile.in:  Add deps to keep Sun make happy.
+
+Tue Sep 21 17:48:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument
+	not_a_breakpoint.
+	* infrun.c (wait_for_inferior): Pass it.  Also consolidate the
+	test of whether we are stepping into a CURRENTLY_STEPPING macro.
+
+Tue Sep 21 17:22:34 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* breakpoint.c (bpstat_stop_status),
+	  infcmd.c (step_1),
+	  infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef
+	  and insert macro.
+
+	* m88k-tdep.c: include ieee-float.h.  new global target_is_m88110.
+	  new const struct ext_format_m88110 for float format.
+	  (pic_prologue_code): add braces.
+	  (next_insn): remove unused variable buf.
+	  (frame_find_saved_regs): remove unused variables next_addr,
+	  saved_regs, regnum.
+	  (frame_locals_address): remove unused variables frame, ap.
+	  (frame_args_address): remove unused variables frame, ap.
+	  (push_parameters): add some breaks and a default case.
+
+	* remote-bug.c: remove redundant includes of value.h, target.h,
+	  serial.h.
+	  (bug_open): corrected typo, sr_multi_scan -> gr_multi_scan.
+	  (bug_fetch_register): special case sfip register for m88110.
+	  remove flag bit masking of pc registers.  This should be handled
+	  by the ADDR_BITS_* macros.
+	  (bug_store_register): special case sfip register for m88110.
+	  Corrected sprint format for extended registers.
+
+	* config/m88k/tm-m88k.h: white space and comment changes.  include
+	  ieee-float.h. expanded to cope with m88110 extended registers.
+	  (R0_REGNUM, XFP_REGNUM, X0_REGNUM): new macros.
+	  (SHIFT_INST_REGS): becomes a real macro.
+
+Tue Sep 21 17:48:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Support bp_call_dummy.
+
+Tue Sep 21 17:06:19 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* elfread.c (record_minimal_symbol_and_info): Guess the section to
+	use from the type.
+	* objfiles.c: Include gdb-stabs.h for SECT_* macros.
+	(objfile_relocate): Relocate textlow and texthigh in psymtabs.
+	Relocate partial symbols.  Check that minimal SYMBOL_SECTION is
+	nonnegative before using it.
+	* symtab.h: Adjust section field comment.
+
+	* remote.c (interrupt_query): New function.
+	(remote_interrupt_twice): Call interrupt_query.
+	(putpkt, getpkt): If quit_flag is set, call interrupt_query.
+	(remote_wait): Don't bother with objfile_relocate if the addresses
+	haven't changed.
+	(remote_fetch_registers): If we see a packet that doesn't start
+	with a hex character, fetch a new one.
+
+Tue Sep 21 11:44:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c, remote-utils.c: Use SERIAL_FLUSH_INPUT after opening it.
+
+	* printcmd.c (print_scalar_formatted): When truncating value we are
+	going to print as unsigned, handle it generally for any length
+	less than sizeof (LONGEST), rather than special-casing sizeof (char),
+	sizeof (short), and sizeof (long).  Clarify comment on what this
+	is for.
+
+	* symfile.c (deduce_language_from_filename): Accept .cxx for C++.
+	* buildsym.c (start_subfile): Use deduce_language_from_filename
+	rather than checking for .C or .cc ourself.
+
+Mon Sep 20 14:53:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h: Declare argument of re_comp as const char *.
+
+	* remote.c, remote-mips.c: Use sr_get_debug not remote_debug.
+
+	* README: Say using bfd from another release doesn't generally work.
+
+Sat Sep 18 10:13:18 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
+
+	* mipsread.c (parse_type): Don't complain() if we guessed struct
+	and it was a union, or vice versa.
+
+	* defs.h (make_cleanup): Change PTR to void * when inside PARAMS.
+
+	Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET.
+	* breakpoint.h (enum bptype): Add bp_call_dummy.
+	(struct bpstat_what): Add call_dummy field.
+	* infrun.c (wait_for_inferior): Deal with it.
+	* breakpoint.c (bpstat_what): Deal with call dummy breakpoint.
+	* infcmd.c (run_stack_dummy): Set the call dummy breakpoint.
+	* config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.
+
+	* remote-sim.h: New file.
+	* remote-sim.c: Add remote debug feature.  Rename stuff to distinguish
+	interface to simulator from gdb-specific stuff.  Other changes.
+	* remote-sp64sim.c: Renamed to remote-sim.c.
+	Use sr_get_debug instead of our own sim_verbose/simif_snoop.
+	Use gnutarget in call to bfd_openr.
+	Rename simif_* to gdbsim_*.
+	* config/sparc/sp64sim.mt: Change remote-sp64sim.c to remote-sim.c.
+
+Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* findvar.c (extract_signed_integer):  Cast *p to LONGEST before doing
+	the xor and subtract.  Otherwise it will not sign extend if the type
+	of LONGEST is larger than int.
+	* cp-valprint.c (cp_print_class_method):  Inhibit core dump if
+	domain is an undefined cross reference.
+	* valops.c (call_function_by_hand):  Set real_pc to correct
+	value if CALL_DUMMY_LOCATION != ON_STACK.
+
+Thu Sep 16 20:37:06 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* config/a29k/tm-a29k.h (FRAME_CHAIN): If rsize is zero, return zero.
+
+Thu Sep 16 13:16:22 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Allow user to single step within
+	a stack dummy.
+
+Thu Sep 16 12:34:01 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* dbxread.c (copy_pending): Deal with END NULL.
+	(process_one_symbol): Add comments about what common_block NULL means.
+
+Wed Sep 15 14:50:26 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* remote-udi.c, remote-adapt.c, remote-mm.c: Move processor_type
+	to tm-a29k.h and a29k-tdep.c and make it an enum.
+	* a29k-tdep.c (a29k_get_processor_type): New function.  Fix many
+	aspects of how we detected the processor type.
+	* remote-udi.c, remote-adapt.c, remote-mm.c (*_open): Call it
+	rather than figuring out the type ourselves.
+
+Thu Sep 16 12:12:59 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c (_trap_low):  Do restore/save sequence after
+	setting sp to ensure that we load the previous window from the
+	right place on the stack.
+
+Thu Sep 16 00:36:32 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c:  Many changes for alpha ecoff format:
+	Correct sizeof(int) == sizeof(long) assumptions.
+	Replace stParsed hack by putting the parsed types on the pending chain.
+	Replace mips specific ecoff mapping by ECOFF_REG_TO_REGNUM macro,
+	provide default for cross debugging.
+	Swapping the symbol back is no longer needed as the symbol is not
+	modified anymore.
+	Add new alpha basic types, handle btTypedef, handle stStaticProc
+	external symbols .
+	Update and clean up cross_ref for alpha cc cross ref variations.
+	Allocate types on the type_obstack to inhibit storage leaks.
+	* config/mips/tm-mips.h (ECOFF_REG_TO_REGNUM):  Define.
+	* gdbtypes.c (recursive_dump_type):  Dump TYPE_TAG_NAME if it is set.
+
+Tue Sep 14 09:12:17 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* stabsread.c (read_type): Process "s" (size) type attribute.
+	If type is defined to another type, copy the type.
+
+Tue Sep 14 18:37:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* config/i386/i386v4.mh (NATDEPFILES): Move exec.o from here...
+	* config/i386/i386v4.mt (TDEPFILES): ...to here.
+
+Tue Sep 14 12:21:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* Makefile.in (remote_utils_h): add serial.h and target.h.
+	  (main.o, remote-es.o, remote-nindy.o, remote.o): remove target.h
+	  (already in remote_utils_h).
+	  (remote-utils.o): new rule.
+
+	* remote-utils.h: include serial.h.
+
+	* serial.h: ifdef protect from multiple inclusion.
+
+	* remote.c, remote-nindy.c, remote-mon.c, remote-es.c: include
+	  remote-utils.h.
+
+	* remote.c (remote_open), remote-nindy.c (nindy_open,
+	  nindy_files_info), remote-mon.c (general_open), remote-es.c
+	  (es1800_open): use remote-utils facilities for baud rate.
+
+Tue Sep 14 09:12:17 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* paread.c, coffread.c, elfread.c, dwarfread.c:
+	Include <time.h> and <sys/types.h> before libbfd.h.
+
+	* paread.c: Define BYTES_IN_WORD before including aout/aout64.h.
+
+	* Makefile.in (a29k-tdep.o): Depend on $(defs_h).
+	* config/a29k/tm-a29k.h (SAVED_PC_AFTER_CALL): Use gr122 not lr0
+	if this	is a transparent procedure.
+
+Mon Sep 13 16:06:43 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* remote.c: Define remote_debug to 0 and #if 0 baud_rate.  Temporary
+	hack so this file compiles again.
+
+	* remote-utils.c (gr_multi_scan): Cast return value from alloca.
+	(gr_multi_scan): #if 0 never-reached return(-1).
+
+	* remote-udi.c (udi_wait): Return inferior_pid not 0.
+
+Mon Sep 13 14:14:35 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Collect some remote things into remote-utils.
+	* remote-utils.[ch]: new files of functions collected from several
+	  different remote targets.
+	* Makefile.in (REMOTE_O): add remote-utils.o.
+	  (dcache_h, remote_utils_h): new macros.
+	  (HFILES): add $(remote_utils_h).
+	  (ALLDEPFILES): add $(remote_utils_h).
+	  (dcache.o): new rule.
+	  (main.o, remote-bug.o): also depend on $(remote_utils_h).
+	* target.h (remote_debug): extern moved to remote-utils.h.
+	* target.c (find_default_run_target, find_core_target): initialize
+	  runable.
+	  (remote_debug): moved to remote-utils.c.
+	  (_initialize_targets): move declaration of user variable
+	  remotedebug to remote-utils.c.
+	* remote-bug.c: include remote-utils.h rather than dcache.h.
+	  (bug_close, bug_write, bug_write_cr, desc, bug_dcache, timeout,
+	  dev_name, check_open, is_open, readchar, readchar_nofail,
+	  pollchar, expect, expect_prompt, get_hex_digit, get_hex_byte,
+	  get_hex_word, bug_kill, bug_detach, bug_create_inferior,
+	  multi-scan, bug_prepare_to_store, bug_fetch_word,
+	  bug_store_word, bug_files_info, bug_mourn, bug_com, bug_device,
+	  bug_speed): removed and replaced with facilities from
+	  remote-utils.[ch].
+	  (bug_read_inferior_memory): renamed to bug_read_memory.
+	  (bug_write_inferior_memory): renamed to bug_write_memory.
+	  (bug_xfer_inferior_memory): renamed to bug_xfer_memory.
+	  (get_word): comment out this unused function for now.
+	  (bug_settings, cpu_check_strings): new statics.
+	  (bug_open): rewritten to use gr_open.
+	  (_initialize_remote_bug): remove declarations of commands bug,
+	  device, speed.
+	* main.c: include remote-utils.h.
+	  (baud_rate): removed to remote-utils.c.
+	  (main): handle baud rate settings using new facilities from
+	  remote-utils.
+	* defs.h (baud_rate): removed extern.
+
+	m88110 support via bug-197 monitor.
+	* remote-bug.c (get_reg_name, bug_fetch_register,
+	  bug_store_register): added m88110 extended register support.
+	  (wait_strings): added bug-197 prompt.
+	  (bug_wait): cope with bug-197 prompt.
+	  (start_load): cope with either bug-197 or bug-187 prompt.
+
+Mon Sep 13 12:53:09 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of
+	pc_changed.  If it was ever set to a non-zero value, it was before
+	GDB 2.8.  It doesn't seem to have any useful function.
+
+	* defs.h: Don't define NORETURN (see comment).
+
+Sat Sep 11 10:46:09 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
+
+	* m88k-nat.c (fill_gregset): Set r31 and sfip.
+
+Thu Sep  9 10:18:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c (udi_wait, case UDIStdinNeeded): Use a loop calling
+	getchar() (terminated only on '\n') instead of scanf.  Send the
+	'\n' which terminates it to the remote system.
+
+	More gcc lint:
+	* exec.c (ignore): Return 0.
+	* stack.c (return_command): Fetch lazy value directly, not via
+	VALUE_CONTENTS, to avoid "value computed is not used".
+	* inflow.c (new_tty): Move osigttou inside #if.
+
+	* remote.c (remote_fetch_registers): If remote reply is short, just
+	note that fact and keep going (reading extra registers as all bits 0).
+	(remote_store_registers): Send number of registers that were found
+	by remote_fetch_registers.
+	* m68k-tdep.c, config/m68k/tm-m68k.h, config/m68k/tm-*.h: Remove
+	HAVE_68881.  Define CANNOT_STORE_REGISTER if ptrace() can't write
+	floating registers.
+	* config/m68k/{tm-m68k-nofp.h,m68k-nofp.mt,tm-m68k-fp.h,m68k-fp.mt}:
+	Remove, replaced by {tm-m68k-em.h,m68k-em.mt}.
+	* Makefile.in, configure.in: Change accordingly.
+
+Thu Sep  9 04:59:03 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (cross_ref):  Allow SGI extended symbol types as cross
+	reference targets.
+	* symmisc.c (print_symbol):  Use TYPE_TAG_NAME not TYPE_NAME to avoid
+	printing of identities.
+
+Wed Sep  8 19:18:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Deal with step resume breakpoint.
+
+Wed Sep  8 13:01:10 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	Gcc lint.
+	* config/m88k/tm-m88k.h (frame_find_saved_regs): prototype.
+	* config/h8300/tm-h8300.h (NUM_REGS): rewrite to avoid nested comment.
+	* blockframe.c (get_prev_frame_info): initialize address.
+	* breakpoint.c (bpstat_copy): initialize retval.
+	  (bpstat_stop_status): initialize value_is_zero.
+	  (bpstat_what): initialize bs_class.
+	  (breakpoint_1, mention): add do-nothing case for bp_step_resume.
+	  (break_command_1): initialize cond_end, addr_end, &
+	  canonical_strings_chain.
+	  (enable_breakpoint): initialize save_selected_frame.
+	* buildsym.c (end_symtab): initialize symtab & linetablesize.
+	* c-exp.y (parse_number): initialize i.
+	* c-typeprint.c (c_type_print_varspec_prefix): include
+	  TYPE_CODE_BITSTRING in switch statements and do nothing.
+	* c-valprint.c (c_val_print): removed unused variable c.
+	* ch-valprint.c (chill_val_print): removed unused variable eltlen.
+	* cp-valprint.c (cp_print_class_method): initialize f & j.
+	* eval.c (evaluate_subexp): initialize pc2, arg1, arg2.
+	* expprint.c (print_subexp): initialize myprec, assoc, & tempstr.
+	* findvar.c (value_from_register): initialize first_addr.
+	* gdbtypes.c (lookup_struct_elt_type): localize use of temporary
+	  variable typename.
+	* infcmd.c (run_stack_dummy): return zero rather than simple
+	  return.
+	* infrun.c (wait_for_inferior): initialize stop_sp, prologue_pc.
+	  remove symtab, appears unused.
+	  (restore_selected_frame): return 1.
+	* mipsread.c (psymtab_to_symtab_1): initialize first_off.
+	  (fixup_sigtramp): initialize b0.
+	* printcmd.c (do_examine): initialize val_type.
+	  (print_frame_args): initialize b.
+	* ser-tcp.c (tcp_restore): comment out declaration.  Appears
+	  unused.
+	* ser-unix.c (hardwire_restore): comment out declaration.  Appears
+	  unused.
+	  (hardwire_send_break): moved variable status into ifdef
+	  HAVE_SGTTY.
+	  (wait_for): moved variable numfds into ifdef HAVE_SGTTY.
+	* serial.h: comment change only.
+	* stabsread.c (rs6000_builtin_type): initialize rettype.
+	  (read_range_type): initialize nbits.
+	* stack.c (print_frame_info): remove unused variable numargs.
+	  (parse_frame_specification): remove unused variables arg1, arg2,
+	  arg3.
+	  (return_command): initialize return_value.
+	* symfile.c (cashier_psymtab): initialize pprev.
+	* symtab.c (find_pc_psymbol): initialize best.
+	  (lookup_symbol): initialize s.
+	  (make_symbol_completion_list): initialize quote_pos.
+	* thread.c: include command.h.
+	  (thread_info): static declaration removed; unused.
+	  (info_threads_command): fix == vs = typo.
+	* typeprint.c (whatis_exp): initialize old_chain.
+	* valprint.c (val_print_string): remove unused variable
+	  first_addr_err.  Initialize old_chain.
+	  (_initialize_valprint): white space comment change.
+	* values.c (show_values): rewrite if statement to avoid empty
+	  body.
+	  (vb_match): remove unused variable fieldtype_target_type.
+
+Wed Sep  8 10:21:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (mipsread.o): Depend on $(bfd_h).
+
+Tue Sep  7 13:06:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/Makefile.in (TAGS): config files are in
+	$(srcdir)/../config, not $(srcdir)/config.
+
+	* config/pa/tm-hppa.h: Declare target_read_pc and target_write_pc.
+	(STORE_RETURN_VALUE): Pass the correct offset of the return
+	register to write_register_bytes.
+	* hppa-tdep.c: Use target_write_pc if PCOQ_TAIL_REGNUM was not saved.
+
+Tue Sep  7 14:30:34 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote.c (remote_wait): Don't call error.  Instead, call warning
+	inside a loop.  User can ^C to get out.
+
+	* config/m68k/tm-m68k.h (FIX_CALL_DUMMY): Changed name of swapping
+	routine to match BFD name change.
+	* config/z8k/tm-z8k.h (FIX_CALL_DUMMY): Likewise.
+
+Mon Sep  6 15:01:57 1993  Jeffrey Wheat  (cassidy@cygnus.com)
+
+	* elfread.c: change elf32_symbol_type to elf_symbol_type
+
+Mon Sep  6 15:43:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote.c (remote_wait): Added 'W' and 'N' responses.
+
+Fri Sep  3 08:57:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c, utils.c: Add comments about immediate_quit.
+
+	* elfread.c (elf_symtab_read): Don't add symbols starting with ".L"
+	to minimal symbols.
+
+	* target.c (pop_target): Don't try to deal with the stack becoming
+	empty.  Shouldn't happen and the code that tried was broken.
+
+	* dcache.c: Cast return value from xmalloc.
+
+	* remote.c: Move setting of immediate_quit from remote_open to
+	remote_start_dummy and set it back to zero when done.
+
+Thu Sep  2 00:07:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m88k-tdep.c: Remove a bunch of unused #includes.
+
+	* language.h: Add comment about current_language.
+
+	* mips-tdep.c (_initialize_mips_tdep): Change heuristic-fence-post
+	from var_uinteger to var_zinteger.
+
+	* configure.in: Fix typo (delta88r4 -> delta88v4).
+
+	* config/m88k/xm-delta88.h: Don't include sys/siginfo.h.  It was
+	to make this work on SVR4 before SVR4 had its own configuration,
+	and it breaks SVR3.
+
+	* config/m88k/tm-delta88v4.h: Define FRAME_CHAIN_VALID_ALTERNATE.
+
+	* config/m88k/delta88v4.h (NATDEPFILES): Remove infptrace.o inftarg.o.
+
+	* config/m88k/xm-dgux.h: Renamed from config/m88k/xm-m88k.h.
+	* config/m88k/m88k.mh: Use xm-dgux.h.
+	* config/m88k/xm-m88k.h: New file, with HOST_BYTE_ORDER,
+	MAKEVA_END and MAKEVA_ARG.
+	* config/m88k/xm-*.h: Include m88k/xm-m88k.h.
+	* printcmd.c: Remove __INT_VARARGS_H code; now in xm-m88k.h.
+
+Wed Sep  1 19:31:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c (udi_wait): Call `warning' not `error'.
+
+	* symtab.c (COMPLETION_LIST_ADD_SYMBOL): If the symbol has a
+	demangling, don't put the mangled form in the completion list.
+
+	* symtab.c, symfile.c, c-exp.y, ch-exp.y, m2-exp.y, buildsym.c,
+	symfile.h, stabsread.c, minsyms.c, solib.c, nlmread.c, dwarfread.c
+	partial-stab.h, symmisc.c, gdbtypes.c: Lint.  Remove (or put
+	inside #if) unused variables and labels.  Fix unclosed comment.
+	Deal with enumeration values unhandled in switch statements.  Make
+	sure non-void functions return values.  Include appropriate
+	headers.
+	* dbxread.c (elfstab_build_psymtabs): Don't check for unsigned
+	value < 0.
+
+Wed Sep  1 14:36:00 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* i960-tdep.c, ns32k-pinsn.c, remote-adapt.c, xcoffread.c:
+	  index -> strchr.
+
+Wed Sep  1 11:35:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c: Add comment explaining why dcache is disabled.
+	(remote_fetch_word, remote_store_word): Make static and #if 0.
+	They are not called from anywhere.
+
+Wed Sep  1 14:41:28 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* arm-tdep.c, convex-tdep.c, convex-xdep.c, dbxread.c,
+	  h8300-tdep.c, h8500-tdep.c, i960-pinsn.c, i960-tdep.c,
+	  infptrace.c, m88k-tdep.c, mips-tdep.c, regex.c, remote-vx.c,
+	  rs6000-tdep.c, xcoffexec.c, xcoffread.c, z8k-tdep.c,
+	  config/arm/tm-arm.h, config/convex/tm-convex.h,
+	  config/gould/tm-np1.h, config/gould/tm-pn.h,
+	  config/m68k/tm-isi.h, config/ns32k/tm-umax.h,
+	  config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+	  config/rs6000/tm-rs6000.h, config/tahoe/tm-tahoe.h,
+	  config/vax/tm-vax.h:  bzero -> memset.
+
+	* regex.c: bcmp -> memcmp.
+
+Wed Sep  1 11:35:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (find_pc_line, find_line_common),
+	symtab.h (struct linetable), xcoffread.c (arrange_linetable):
+	Revise comments re linetable sorting.
+	* buildsym.c (compare_line_numbers): Sort by pc, not by line.
+	* coffread.c: Tell end_symtab to sort the line table.
+
+	* coffread.c: Re-work a lot of the coff-specific stuff to use stuff
+	in buildsym.c.  This includes coff_finish_block, coff_context_stack,
+	coff_local_symbols, coff_file_symbols, coff_global_symbols,
+	coff_end_symtab and coff_add_symbol_to_list.
+	(read_enum_type): Deal with it now that we have a "struct pending"
+	not a "struct coff_pending".
+
+	* buildsym.c (end_symtab): Don't realloc subfile->linetable.
+
+Wed Sep  1 13:12:43 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* a68v-nat.c, altos-xdep.c, convex-tdep.c, convex-xdep.c,
+	  findvar.c, hppab-nat.c, hppah-nat.c, i386mach-nat.c,
+	  irix4-nat.c, m68k-tdep.c, m88k-tdep.c, mipsread.c, regex.c,
+	  remote-bug.c, remote-hms.c, rs6000-nat.c, rs6000-tdep.c,
+	  sparc-nat.c, stabsread.c, sun3-nat.c, sun386-nat.c, symfile.c,
+	  umax-xdep.c, xcoffread.c, 29k-share/udi/udip2soc.c,
+	  29k-share/udi/udr.c, config/a29k/tm-a29k.h, config/arm/tm-arm.h,
+	  config/convex/tm-convex.h, config/gould/tm-np1.h,
+	  config/gould/tm-pn.h, config/h8300/tm-h8300.h,
+	  config/h8500/tm-h8500.h, config/i386/tm-i386aix.h,
+	  config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
+	  config/i960/tm-i960.h, config/m68k/tm-news.h,
+	  config/m88k/tm-m88k.h, config/mips/tm-mips.h,
+	  config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
+	  config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+	  config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
+	  config/tahoe/tm-tahoe.h, config/vax/tm-vax.h,
+	  config/z8k/tm-z8k.h, nindy-share/nindy.c: bcopy -> memcpy.
+
+Wed Sep  1 05:05:53 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_partial_symbols):  Use language from FDR if it
+	is unambigous.  Patch from ptf@delcam.co.uk (Paul Flinders).
+	* mipsread.c (ecoff_symfile_info):  New struct to hold the global
+	pending_list.
+	* mipsread.c (mipscoff_symfile_init, parse_partial_symbols):
+	Allocate the global pending list and link it to the objfile.
+	* mipsread.c (is_pending_symbol, add_pending):  Use global pending
+	list from objfile. Allocate pending list entries from the
+	psymbol_obstack.
+	* mipsread.c (free_pending):  Remove. The pending list is now
+	freed when the psymbol_obstack is freed.
+	* mipsread.c (psymtab_to_symtab1):  Remove pending list allocation,
+	the global pending list is used now.
+	* mipsread.c (parse_partial_symbols):  Skip only the first
+	file indirect entry when building the dependency list.
+
+Tue Aug 31 15:01:27 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Break dcache code out of remote.c.
+	* dcache.h: white space changes only.
+	* dcache.c: add user settable variable to set whether data caching
+	  is in use.
+	* remote.c: include dcache.h. removed data caching code which is
+	  now in dcache.c.  Compile in data caching again.  (data caching
+	  is currently off by default.)
+	  (remote_read_bytes, remote_write_bytes): change second arg to
+	  unsigned char.
+	  (remote_dcache): new static variable.
+	* Makefile.in (REMOTE_O): add dcache.o.
+	* config/m88k/m88k.mt (TDEPFILES): removed dcache.o.
+
+	Break dcache code out of remote-nindy.c.
+	* remote-nindy.c: removed dcache code.  Changed callers to use new
+	  conventions.  include dcache.h.
+	  (nindy_dcache): new static variable.
+	* config/i960/nindy960.mt (TDEPFILES): added dcache.o.
+
+	Break dcache code out of remote-bug.c into dcache.[hc].
+	* Makefile.in (dcache_h): new macro.
+	  (HFILES): added $(dcache_h).
+	  (ALLDEPFILES): added dcache.c.
+	  (dcache.o): new rule.
+	  (remote-bug.o): now depends on $(dcache_h).
+	* remote-bug.c: include dcache.h. remove externs for insque and
+	  remque, add extern for bcopy.  Prototype bug_close,
+	  bug_clear_breakpoints, bug_write_cr.  dcache code moved to
+	  dcache.[hc].  Changed dcache calling convention to include an
+	  initial DCACHE argument.
+	  (bug_dcache): new static variable.
+	  (bug_read_inferior_memory): change second arg to
+	  unsigned char.
+	* dcache.[ch]: new files.
+	* config/m88k/m88k.mt (TDEPFILES): add dcache.o.
+
+Tue Aug 31 10:33:13 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-typeprint.c (c_print_type_base): Treat show = 0 just like
+	show < 0.  The only case where we had been distinguishing is that
+	show = 0 used to print "struct  " or "enum  " instead of
+	"struct {...}" or "enum {...}" which seems clearly wrong.
+
+Mon Aug 30 17:51:32 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* configure.in: recognize m88110 as an m88k.
+
+Mon Aug 30 16:07:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (call_function_by_hand): If we discard cleanups, call
+	bpstat_clear (&inf_status.stop_bpstat).
+
+Mon Aug 30 12:47:46 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* stabsread.h, dbxread.c (end_psymtab):  Return NULL if the psymtab
+	was empty and thrown away.
+	* mipsread.c (parse_partial_symbols):  Do not add empty psymtabs to
+	dependency list, skip self dependencies.
+	* mipsread.c (parse_fdr):  Removed, obsolete.
+	* mipsread.c (parse_lines):  Check for cbLine being zero, not
+	cbLineOffset.
+	* mipsread.c (struct symloc):  Add pst_language.
+	* mipsread.c (parse_partial_symbols): Set up proper language for
+	header files, save it in pst_language for psymtab_to_symtab_1.
+	* mipsread.c (psymtab_to_symtab_1):  Use pst_language.
+
+Mon Aug 30 10:48:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Fix typo m88*-motorola-svr4* -> sysv4*.
+
+Fri Aug 27 17:09:19 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* paread.c: Include som.h instead of libhppa.h.  (From Utah.)
+
+Fri Aug 27 09:30:40 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* symmisc.c (dump_symtab): Use catch_errors around print_symbol.
+	Change calling sequence of print_symbol to fit catch_errors.
+
+	* mips-tdep.c: Call reinit_frame_cache every time the user does
+	"set heuristic-fence-post".
+
+	* gdbserver/low-sun3.c: New file.
+	* gdbserver/Makefile.in, config/m68k/sun3.mh: Change accordingly.
+
+	* Rename files for 14-character limits:
+	gdbserver/remote-gutils.c -> gdbserver/utils.c
+	gdbserver/remote-inflow.c -> gdbserver/low-lynx.c
+	gdbserver/remote-inflow-sparc.c -> gdbserver/low-sparc.c
+	gdbserver/remote-server.c -> gdbserver/server.c
+	remote-monitor.c -> remote-mon.c
+	* Makefile.in, gdbserver/Makefile.in, gdbserver/configure.in,
+	config/m68k/monitor.mt,	config/i386/i386lynx.mh,
+	config/sparc/sun4os4.mh: Change accordingly.
+	* gdbserver/Makefile.in: Remove more junk inherited from gdb Makefile.
+
+Thu Aug 26 14:32:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c, inferior.h (run_stack_dummy): If we stop somewhere
+	besides the dummy, return 1 rather than calling error().
+	Let caller print the error message.  Remove name argument.
+	* valops.c (call_function_by_hand): Deal with changes to calling
+	sequence of run_stack_dummy.  Discard restore_inferior_status cleanup
+	if run_stack_dummy returns 1.
+
+	* Version 4.10.2.
+
+	* config/mips/tm-mips.h (EXTRACT_STRUCT_VALUE_ADDRESS):
+	Get struct return address from v0, not a0.
+
+	* infrun.c (restore_inferior_status): Use catch_errors when
+	restoring selected frame.
+
+Wed Aug 25 21:52:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (save_inferior_status, restore_inferior_status):
+	Save and restore the registers too.
+	* inferior.h (struct inferior_status): Add "registers".
+
+Tue Aug 24 00:36:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (end_psymtab): Clean up comment.
+
+	* frame.h, symtab.h, findvar.c (read_var_value):  Change basereg
+	support to use LOC_BASEREG rather than SYMBOL_BASEREG_VALID.
+	* dwarfread.c: Use LOC_BASEREG where appropriate.
+	* Various: Support LOC_BASEREG and LOC_BASEREG_ARG.
+
+	* coffread.c (init_lineno, init_stringtab): Don't check whether
+	xmalloc returned NULL.
+
+	* config/vax/xm-vaxult.h: Define NO_PTRACE_H.
+
+	* target.c, target.h: Add "set remotedebug" command.
+	* remote-bug.c, remote.c, remote-mips.c: Remove "set remotedebug" and
+	"set m88ksnoop" options and use generic "set remotedebug" instead.
+	* NEWS: Describe this change.
+
+Mon Aug 23 20:26:22 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* buildsym.h: Remove declaration of dbxread.c functions.
+	* stabsread.h: Group together dbxread.c functions.
+	Move elfstab_build_psymtabs here from symfile.h.
+	Declare pastab_build_psymtabs.
+	* elfread.c, paread.c: Include stabsread.h (for stabsread_new_init
+	declaration, etc).
+
+Mon Aug 23 17:16:23 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* remote-bug.c: rename quiet to bug88k_snoop.
+	  (double_scan, multi_scan): generalize double_scan into a scan
+	  for multiple patterns.  Rename to multi_scan.
+	  (bug_wait, bug_write_inferior_memory): adapt to use the new
+	  multi_scan in order to catch and represent target bus errors.
+	  (bug_scan): currently unused, so comment out.
+	  (bug_quiet): removed.  Replaced with a standard user settable boolean.
+
+	* m88k-tdep.c: remove include of sys/dir.h.  Appears unnecessary
+	  and isn't available on solaris.
+
+Mon Aug 23 14:56:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m88k/{delta88v4.mt,delta88v4.mh}: New files
+	* config/m88k/delta88.mh: Fix comment.
+	* config/m88k/tm-delta88.h: Remove unused BCS define.
+	* config/m88k/{tm-delta88v4.h,xm-delta88v4.h,nm-delta88v4.h}:
+	New files.
+	* configure.in: Recognize m88*-motorola-sysv4*.
+	* m88k-nat.c: Always include sys/types.h; don't depend on USG.
+
+Mon Aug 23 12:57:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_symbol, parse_type, cross_ref):  Pass name of
+	symbol as an argument and use it in complaints.
+	* symmisc.c (dump_psymtab):  Dump filenames of dependencies.
+
+Mon Aug 23 1993  Sean Fagan  (sef@cygnus.com)
+		 and Jim Kingdon  (kingdon@cygnus.com)
+
+	Add NetBSD support:
+	* configure.in: Recognize netbsd.
+
+Sun Aug 22 22:50:32 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (get_textlow): Don't go past a K_END when looking for a
+	K_FUNCTION.  Avoids losing on source files with no functions. 
+
+Fri Aug 20 14:01:39 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-nindy.c: Remove unused include of sys/ioctl.h.
+
+	* frame.h, symtab.h: Revise comments regarding baseregs.
+
+Fri Aug 20 15:07:05 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_partial_symbols, psymtab_to_symtab_1):
+	Set language for psymtab and symtab.
+	* mipsread.c (new_symbol):  Set language and initialize demangled
+	name for symbol.
+	* symmisc.c (print_symbol):  Use SYMBOL_SOURCE_NAME when printing
+	the symbol type.
+	* symtab.c (decode_line_1):  Inhibit coredumps with cfront executables.
+
+Fri Aug 20 14:01:39 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Move KERNEL_U_ADDR from xm-hp300bsd.h to nm-hp300bsd.h and make
+	it conditionalized on 4.3 vs. 4.4.
+	* config/m68k/nm-hp300bsd.h: Move REGISTER_U_ADDR out of 4.3 and
+	4.4 sections; it was identical and now works for 4.4.
+
+	* mips-tdep.c (is_delayed): Use INSN*BRANCH* not ANY_DELAY.
+
+	* printcmd.c (MAKEVA_END): Update this version to use "aligner".
+
+Thu Aug 19 22:08:09 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/vax/tm-vax.h (BELIEVE_PCC_PROMOTION):  Define.
+	* mipsread.c (parse_symbol, parse_type, cross_ref):  Handle corrupt
+	file indirect entries with complaints instead of core dumps. Remove
+	complaint for stTypedef within aggregates.
+
+Thu Aug 19 17:58:39 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (process_coff_symbol): Ignore tagnames like .0fake.
+
+	* coffread.c (coff_read_enum_type): #if 0 out code which changes
+	enum {FALSE, TRUE} into boolean.
+
+	* config/m68k/delta68.m{t,h}: Use nm-delta68.h, etc. not
+	non-existent files nm-delta.h, etc.
+	* config/m68k/tm-delta68.h: Define CANNOT_STORE_REGISTER.
+	* delta68-nat.c: Add "[0]" in offsetof argument.
+	* delta68-nat.c (_initialize_kernel_u_addr): Don't try to set up
+	nl with initializer, just assign to it.  Check n_scnum field on
+	return. 
+
+Wed Aug 18 21:42:52 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hpux_symtab): Call SET_NAMESTRING for K_MODULE
+	debug symbols.
+
+Wed Aug 18 12:03:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_address), values.c (value_as_pointer): Don't
+	use ADDR_BITS_REMOVE.
+	* defs.h: Try to clarify comment about ADDR_BITS_REMOVE.
+
+	* blockframe.c (block_innermost_frame): Uncomment.
+	Return NULL if passed NULL.
+	* frame.h: Declare it.
+	* expression.h (union exp_element): Add field block.
+	* parse.c (write_exp_elt_block): New function.
+	* expression.h (OP_VAR_VALUE): Now takes additional struct block *.
+	* *-exp.y: Write block for OP_VAR_VALUE.
+	* eval.c, expprint.c, parse.c: Deal with block for OP_VAR_VALUE.
+	* valops.c, value.h (value_of_variable), callers:
+	Add second argument, for block.
+
+	* main.c (gdb_readline): If we read some characters followed by EOF,
+	return them rather than returning NULL.
+
+Tue Aug 17 11:14:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mips-tdep.c: Remove unused #ifndef NUMERIC_REG_NAMES and add comment.
+
+Tue Aug 17 15:10:04 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* config/m88k/tm-m88k.h: Fix typo in comment.
+	  (FP_REGNUM): define in terms of SP_REGNUM
+	  rather than by absolute number.  Also clearly comment that this
+	  is a convenient lie in order to decrease future confusion.
+	  (ACTUAL_FP_REGNUM): new macro for FP.
+	  (FRAME_CHAIN_VALID): removed.  Standard default works fine.
+	* m88k-tdep.c (frame_chain_valid): redundant, so removed.
+	  (NEXT_PROLOGUE_INSN): removed unused fourth arg, fixed all
+	  callers.
+	  (read_next_frame_reg): declare static.
+	  (examine_prologue): removed unused variabel insn2, rename insn1
+	  to insn, rewrote comment about finding fp, sp, etc. set frame_fp
+	  based on ACTUAL_FP_REGNUM rather than FP_REGNUM which is
+	  actually a scammed alias for SP_REGNUM on m88k. 
+
+	* frame.h: fixed typo in comment.
+
+Tue Aug 17 11:14:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* 29k-share/udi/udiphcfg.h: Always include udiphunix.h not udiphdos.h.
+
+	* complaints.c (complain): fflush (stdout) after output.
+
+Tue Aug 17 01:43:55 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c, frame.h (sigtramp_saved_pc):  New routine to fetch
+	the saved pc from sigcontext on the stack for BSD signal handling.
+	* config/i386/tm-i386bsd.h (SIGTRAMP_START, SIGTRAMP_END, FRAME_CHAIN,
+	FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET):
+	Define to make backtracing through sigtramp work.
+	* config/vax/tm-vax.h (SIGTRAMP_START, SIGTRAMP_END, TARGET_UPAGES,
+	FRAME_SAVED_PC, SIGCONTEXT_PC_OFFSET):  Ditto.
+
+Mon Aug 16 13:52:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (cd_command): If current_directory on entry is "/", then
+	don't append an extra slash.
+	Don't assume that /../.. means /.
+
+	* target.c (target_xfer_memory): Clear errno before calling
+	to_xfer_memory.
+
+	* stack.c (frame_info, print_frame_info): Add comment about using
+	the starting source line number on a line boundary if backtracing
+	through sigtramp.
+
+Mon Aug 16 09:52:33 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Add U Utah contribution notice.  Add TODO list.
+	(hp_type_lookup): Use TYPE_NAME and TYPE_TAG_NAME.
+	(process_one_debug_symbol): Likewise.
+
+Mon Aug 16 02:56:01 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (create_new_frame, get_prev_frame_info):
+	Use the function name when calling IN_SIGTRAMP.
+	* config/m68k/tm-m68k.h (SIG_PC_FP_OFFSET, SIG_SP_FP_OFFSET):
+	Define for correct handling of bachtraces through _sigtramp.
+	* m68k-tdep.c (m68k_find_saved_regs):  Adjust saved sp for fake
+	sigtramp frames.
+	* mipsread.c (parse_type):  Handle corrupt TIR info with complaint
+	instead of core dump.
+	* mipsread.c (parse_partial_symbols):  Put static symbols into the
+	mimimal symbol table, use proper mst_types for all minimal symbols.
+	* stack.c (frame_info, print_frame_info):  Use the starting source
+	line number on a line boundary if backtracing through sigtramp.
+
+Fri Aug 13 14:37:05 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* remote-bug.c: include gdbcmd.h.
+	  (sleep, remque, insque): forward decls added.
+	  (bug_fetch_registers, bug_store_registers): forward decls
+	  removed.
+	  (bug_read_inferior_memory, bug_write_inferior_memory): forward
+	  decls added.
+	  (srec_frame, srec_max_retries, srec_bytes, srec_echo_pace,
+	  srec_sleep, srec_noise): new static variables for user settable
+	  options.  Mostly these are for debugging and tuning.  I don't
+	  expect them to stay user settable options for long.
+	  (timeout): change default to 4 seconds.
+	  (check_open): declare funtion static, force return value.
+	  (readchar_nofail): if timeout, then say so if not being quiet.
+	  (pollchar, double_scan, bug_scan, bug_srec_write_cr,
+	  start_load): new functions.
+	  (bug_wait): rewritten to use double scan.
+	  (expect): while (1) -> for (;;)
+	  (get_hex_digit): rewrite if condition to avoid gcc complaints.
+	  (bug_load, bug_create_inferior, bug_open, bug_store_register):
+	  removed unused variables.
+	  (bug_load): replaced DELTA macro with user settable srec_frame
+	  variable.  Other minor lint.
+	  (find_end_of_word, is_baudrate_right, set_rate, not_bug_wait,
+	  gethex, timed_read, translate_addr, bug_before_main_loop):
+	  unsused and removed.
+	  (bug_resume): add missing first arg, pid.
+	  (get_reg_name): use ip rather than cr04.
+	  (bug_write, bug_write_cr, but_clear_breakpoints, bug_quiet):
+	  declare type, args, and explicitly return.
+	  (bug_store_register): straighten out the ip vs cr04 confusion.
+	  (bug_write_inferior_memory): rewrite to cope with errors while
+	  downloading s-records.
+	  (bug_read_inferior_memory): declare static.
+	  (bug_clear_breakpoints): expect nobr before prompt.
+	  (_initialize_remote_bug): add initializations for srec-bytes,
+	  srec-max-retries, srec-frame, srec-noise, srec-sleep,
+	  srec-echo-pace.
+
+	* Makefile.in (remote-bug.o): new rule.
+	  (ALLDEPFILES): added remote-bug.c
+
+	* remote-hms.c (hms_wait): use -1 for timeout's which means block
+	  forever rather than 99999.
+
+	* ser-unix.c (get_tty_state): if a descriptor is not a tty, then
+	  simply save encode this fact as the process group and return
+	  success rather than an error.
+	  (set_tty_state): if process group is -1, do not reset the
+	  process group.
+	  (hardwire_reachar): comment change.
+
+	* serial.h: comment change.
+
+	* config/m88k/tm-m88k.h: comment change to remove embedded
+	  comment.
+	  (SKIP_PROLOGUE): skip_prologue returns a value which is expected
+	  to reset the pc argument.  So reset it.
+
+Fri Aug 13 10:15:24 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.10.1 after release and cvs
+	tagging.
+
+Thu Aug 12 20:40:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/Makefile.in: Use GDBSERVER_LIBS and
+	GDBSERVER_DEPFILES.  Also remove much (but not all that could be
+	removed) crud inherited from gdb Makefile.in.
+	* config/i386/i386lynx.mh, config/sparc/sun4os4.mh: Define GDBSERVER_*.
+	* gdbserver/README: Say it works on Sun and change configuration
+	instructions slightly.
+
+Wed Aug 11 18:56:59 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* config/i386/i386v4.mh: use -lsocket and -lnsl, for remote
+	targets that use BSD style network connections
+
+Wed Aug 11 17:54:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-{monitor,bug}.c: Make bug_ops not static (forward declaration
+	of statics doesn't work with SunOS4 /bin/cc).
+	Rename the occurrence in remote-monitor.c to monitor_bug_ops.
+
+Tue Aug 10 13:07:14 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* blockframe.c (find_pc_partial_function),
+	mips-tdep.c (find_proc_desc): Deal with "pathological" case.
+
+Tue Aug 10 14:50:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (wrap_here): Allow indent to be NULL.
+	(fputs_filtered): Don't check for null wrap_indent (wrap_here now
+	guarantees that it isn't, and anyway we were only checking one out
+	of the two places we dereferenced it).
+
+	* objfiles.h (struct objfile): Clean up comments for
+	{obj,sym}_private to clarify what they are private to.
+
+Mon Aug  9 16:45:00 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	* stabsread.c, buildsym.c (hashname): Moved function to
+	  buildsym.c, as suggested in the sources.
+
+Mon Aug  9 09:53:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c: Make udi_ops extern rather than trying forward
+	declaration of a static variable.
+
+	* hppab-nat.c: Define ptrace to call_ptrace and pass the 5th arg
+	there, rather than using an ANSI C specific macro.
+
+	* 29k-share/udi/udr.c: Include fcntl.h not sys/fcntl.h.  Also put
+	sys/types.h near the top (just on general principles).
+
+	* environ.c (set_in_environ): Remove G960BASE and G960BIN; they are
+	no longer used.
+
+	* gdbcore.h: New variable gnutarget.
+	* core.c: Add commands to set and show it.
+	* Callers to bfd_*open*: Pass gnutarget instead of NULL as target.
+	* environ.c (set_in_environ): For GNUTARGET, use set_gnutarget not
+	putenv.
+
+	* symtab.c (decode_line_1): Give error on unmatched single quote.
+
+Sun Aug  8 13:59:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* ser-unix.c (hardwire_send_break) [HAVE_SGTTY]: Use select not usleep.
+
+	* remote.c: Add comments about 'd', 'r', and unrecognized requests.
+
+	* inflow.c (terminal_init_inferior): Don't muck with tty state if
+	gdb_has_a_terminal() is false.
+
+Sun Aug  8 10:07:47 1993  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (record_minimal_symbol):  Remove prototype and
+	function.
+	* dwarfread.c (add_partial_symbol):  Remove code to add minimal
+	symbols and remove comment about limitations.  Experiments show
+	that now that gdb handles the ELF symtab better for creating
+	minimal symbols, that no additional information is added by
+	examining the DWARF information, and in fact, given the
+	limitations, the DWARF code was actually making things worse.
+
+Sat Aug  7 10:59:03 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* elfread.c (elf_symtab_read):  Properly sort out the bss symbols
+	from the data symbols and give them the correct minimal_symbol_type.
+	Add file static symbols to the minimal symbol table, not just
+	global symbols.  Add absolute symbols as well (like _edata, _end).
+	Redo stabs-in-elf special symbol handling now that file static
+	symbols are entered into the into the minimal symbol table.
+	* dwarfread.c (add_partial_symbol):  Add comment about limitations
+	of DWARF symbols for distinquishing data from bss when adding
+	minimal symbols.  Add file local symbols to minimal symbols.
+
+Thu Aug  5 08:58:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* ser-go32.c: Define job_control variable.
+
+Thu Aug  5 15:56:13 1993  david d `zoo' zuhn  (zoo@rtl.cygnus.com)
+
+	* configure.in: z8k-coff is the same as z8k-sim
+
+Thu Aug  5 08:58:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* 29k-share/udi/udip2soc.c: Include sys/types.h before sys/file.h.
+
+	* config/i386/tm-i386bsd.h (NUM_REGS):  There are only 10, not 11.
+
+	* inflow.c: Put all uses of F_GETFL and F_SETFL in #ifdef F_GETFL.
+
+	* 29k-share/udi/udip2soc.c: Include fcntl.h not sys/fcntl.h.
+
+Wed Aug  4 18:32:12 1993  Fred Fish  (fnf@cygnus.com)
+
+	* inflow.c (pass_signal):  Signal handlers take one int arg;
+	supply an unused one to make it type compatible as an arg to
+	signal().
+
+Tue Aug  3 18:34:14 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* config/mips/tm-mips.h: Include bfd.h before coff/sym.h.
+
+Tue Aug  3 15:34:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (ALLCONFIG):  Add config/i386/i386nw.mt,
+	config/m68k/delta68.mh, config/m68k/delta68.mt,
+	config/m68k/dpx2.mh, config/m68k/dpx2.mt, config/mips/riscos.mh,
+	config/mips/news-mips.mh.
+	* Makefile.in (ALLPARAM):  Add config/i386/nm-symmetry.h,
+	config/i386/tm-i386nw.h, config/m68k/nm-delta68.h,
+	config/m68k/tm-delta68.h, config/m68k/xm-delta68.h,
+	config/m68k/nm-dpx2.h, config/m68k/tm-dpx2.h,
+	config/m68k/xm-dpx2.h, config/mips/xm-makeva.h.
+	* Makefile.in (ALLDEPFILES):  Add dpx2-nat.c.
+
+Tue Aug  3 12:02:09 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c: Updated for BFD ECOFF changes.  Now gets the
+	swapping routines and external structure sizes via the
+	ecoff_backend information.  No longer includes coff/mips.h.
+
+Tue Aug  3 10:58:04 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (SFILES): Add thread.c
+
+Tue Aug  3 10:21:58 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sp64sim.c (simif_create_inferior): Add FIXME regarding
+	sim_set_args return code.
+
+Mon Aug  2 16:35:31 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* Makefile.in (VERSION): bumped to 4.9.4.
+
+	* remote-monitor.c: updated copyright.
+	  (bug_ops, monitor_desc): now static.
+	  (monitor_desc): in several places, check and/or set to NULL.
+
+	* remote-hms.c (hms_files_info): Add the appropriate items where
+	  missing in the printf call.
+
+	* remote-bug.c: new file for m88k bug support.
+
+	* config/m88k/m88k.mt (TDEPFILES): added remote-bug.o.
+
+Mon Aug  2 14:22:09 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
+
+	* h8300-tdep.c:  Use new variable h8300hmode.
+
+Mon Aug  2 12:06:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (typecmp): If we are passing a non-reference to a function
+	which takes a reference, pass the address.
+	(value_arg_coerce): Don't use COERCE_ENUM; we don't want to dereference
+	references here.
+
+	* thread.c (thread_switch): Define as static.
+	(add_thread): Cast return value from xmalloc.
+
+	* gdbtypes.c (fill_in_vptr_fieldno): Call check_stub_type.
+	* gdbtypes.{c,h}: Improve comments on vptr_fieldno.
+
+Mon Aug  2 11:58:52 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* README:  Elaborate on gdb C++ support and cfront support.
+
+Mon Aug  2 11:30:57 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* i386lynx-nat.c, thread.c, thread.h:  Update copyrights.
+
+Mon Aug  2 12:06:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (ALLDEPFILES): Add i386lynx-nat.c.
+
+Mon Aug  2 08:42:50 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* gdbserver/remote-inflow.c (create_inferior):  Fix comments, and
+	error msg.  Setup seperate process group for child.
+	* (write_inferior_memory):  Sleep for 1 second and retry on ptrace
+	failure.
+
+Sun Aug  1 22:58:18 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* config/i386/i386lynx.mh (NATDEPFILES):  Drop coredep (for now).
+	* config/i386/nm-i386bsd.h:  Protect from multiple inclusion.
+	* config/i386/nm-i386lynx.h:  Lotsa new host porting stuff.
+	* config/i386/tm-i386lynx.h:  Define SAVED_PC_AFTER_CALL and
+	target_pid_to_str.
+
+	* Makefile.in (CLIBS):  Reorder to make Lynx ld happy.
+	* (HFILES):  New file thread.h.
+	* (OBS):  New file thread.c.
+	* configure.in:  Host config for Lynx/386.
+	* fork-child.c (fork_inferior):  Call init_thread_list().
+	* infrun.c (resume):  Add pid to invocation of target_resume().
+	* (wait_for_inferior): Pay attention to pid from target_wait().
+	Multi-threading code now uses this to determine what to do.
+	* inftarg.c (child_wait):  Conditionalize based on CHILD_WAIT macro.
+	Use target_pid_to_str() macro throughout when printing pid.
+	* inferior.h (child_resume):  Add pid to prototype.
+	* hppab-nat.c hppah-nat.c infptrace.c (child_resume):  Pass in pid as
+	argument, instead of using inferior_pid.
+	* procfs.c (procfs_resume):  Pass in pid as argument.  Ignored for
+	now.  Use target_pid_to_str() macro throughout for printing process id.
+	* remote-adapt.c (adapt_resume):  Pass in pid as argument.
+	* remote-eb.c (eb_resume):  Pass in pid as argument.
+	* remote-es.c (es1800_resume):  Pass in pid as argument.
+	* remote-hms.c (hms_resume):  Pass in pid as argument.
+	* remote-mips.c (mips_resume):  Pass in pid as argument.
+	* remote-mm.c (mm_resume):  Pass in pid as argument.
+	* remote-monitor.c (monitor_resume):  Pass in pid as argument.
+	* remote-nindy.c (nindy_resume):  Pass in pid as argument.
+	* remote-sa.sparc.c (remote_resume):  Pass in pid as argument.
+	* remote-sim.c (rem_resume):  Pass in pid as argument.
+	* remote-sp64sim.c (simif_resume):  Pass in pid as argument.
+	* remote-st.c (st2000_resume):  Pass in pid as argument.
+	* remote-udi.c (udi_resume):  Pass in pid as argument.
+	* remote-vx.c (vx_resume):  Pass in pid as argument.
+	* remote-z8k.c (rem_resume):  Pass in pid as argument.
+	* remote.c (remote_resume):  Pass in pid as argument.
+	* solib.c (solid_create_inferior_hook):  Pass inferior_pid to
+	target_resume().
+	* target.c (normal_pid_to_str):  New routine to print out process
+	ID normally.
+	* target.h (struct target_ops):  Add pid to prototype at
+	to_resume().  (target_resume):  Add pid argument.
+	* (target_pid_to_str):  Default definition for normal type pids.
+	* thread.h, thread.c:  New modules for multi thread/process control.
+
+Sun Aug  1 13:02:42 1993  John Gilmore  (gnu@cygnus.com)
+
+	* README:  Say that bug-gdb is also the place to send requests
+	for help with GDB.
+
+Sun Aug  1 09:42:13 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (make-proto-gdb-1):  Use -f opt on rm of Makefile.
+	* h8500-tdep.c:  Add parens around a few macro args.
+
+Fri Jul 30 15:43:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove items about unix-to-unix/rapp debugging (now we
+	have gdbserver), moving xm files to subdirectory, ptype yylval,
+	and file-local symbols.
+
+	* gdbtypes.h: Improve comments about C++ methods.
+
+Fri Jul 30 14:16:32 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* c-exp.y:  Add missing 5th arg for one call to lookup_symbol, cast
+	NULL in all other calls to correct pointer types.
+
+Fri Jul 30 15:43:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	From Jeffrey Law:
+	* tm-hppa.h (TARGET_WRITE_PC): Define.
+	* hppa-tdep.c (hppa_fix_call_dummy): If in a syscall,
+	then return the address of the dummy itself rather than
+	the address of $$dyncall.
+	(target_write_pc): New function to store a new PC.
+
+Fri Jul 30 12:51:27 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  and Jim Kingdon (kingdon@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set_one):  Always reparse breakpoint
+	conditions, they might contain symbol table references.
+
+Fri Jul 30 12:51:27 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_symbol):  Handle opaque struct definitions and
+	type naming for stTypedef symbols.
+
+Fri Jul 30 14:44:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-exp.y (yylex): Detect C++ nested types.
+
+Fri Jul 30 11:07:37 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* sp64-tdep.c (sparc64_frame_chain, sparc64_frame_saved_pc): Deleted.
+	(dump_ccreg, sparc_print_register_hook): New fns.
+	* remote-sim.h: New file.
+	* remote-sp64sim.h (sim_*): External fns.  (simif_*): Internal fns.
+
+	* config/sparc/sp64.mt: New file.
+	* config/sparc/tm-sp64.h (FRAME_CHAIN, FRAME_SAVED_PC): Deleted.
+	(PRINT_REGISTER_HOOK): Call new fn sparc_print_register_hook.
+
+Fri Jul 30 10:15:01 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (ALLCONFIG):  Add config/i386/ptx.mh
+
+Fri Jul 30 08:58:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	From J. Law:
+	* infcmd.c (read_pc): Remove PA specific code.
+	* tm-hppa.h (TARGET_READ_PC): Define.
+	* hppa-tdep.c (target_read_pc): New function.
+
+	* symtab.c (gdb_mangle_name): Deal with it if type lacks a name.
+
+Fri Jul 30 07:36:53 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* NEWS:  Add note that DEC alpha support is host only, not native.
+	* README:  Emphasize that C++ support works best with GNU C++ and
+	stabs debugging format.
+	* delta68-nat.c:  Add missing FSF copyright.
+
+Fri Jul 30 08:58:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* paread.c (pa_symtab_read): Put file-local symbols in minimal symbols.
+	* hppa-tdep.c (frame_chain_valid): Check that our function has the
+	same address as _start, not that it must be the same symbol.
+
+Fri Jul 30 00:18:40 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (ALLDEPFILES):  Add delta68-nat.c
+	* Makefile.in (delta68-nat.o):  Add dependency.
+
+Thu Jul 29 12:09:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* value.h (COERCE_ENUM): Use COERCE_REF to coerce refs; value_ind
+	was adequate in gdb 3.5 but not now.
+
+	* valops.c (typecmp): An array in t2 matches a pointer in t1.
+
+	* valops.c (typecmp): When comparing type1& to type2, compare
+	type1 and type2 as leniently as if we were comparing type1 to
+	type2.
+
+	* cp-valprint.c (cplus_print_value): Don't dump core if the
+	baseclass doesn't have a name.
+	* values.c (vb_match): New function, which finds the virtual
+	base class pointer even if the types are nameless.
+	(baseclass_{addr,offset}): Use it.
+
+	* hppa-tdep.c: Make "maintenance print unwind" command from old
+	"unwind" command.
+
+	* remote-udi.c: Remove udi_timer, call to siginterrupt, and associated
+	obsolete junk which apparently had been copied from the
+	pre-serial.h remote.c, but which is no longer used.
+
+Thu Jul 29 12:36:20 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (NONSRC):  Need 29k-share/README, not
+	29k-share/udi/README.
+
+Thu Jul 29 12:09:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* paread.c (pa_symfile_init): If error reading string table, don't
+	use errno in cases where it hasn't been set.
+
+	* ser-unix.c (gdb_setpgid): Pass our pid, not 0, to setpgid.
+
+	* remote-monitor.c (_initialize_monitor): Comment out use of
+	connect_command, since connect_command itself is commented out.
+
+	* remote-monitor.c (generic_open): Parse arguments the same way
+	as remote.c.
+
+	* hppa-tdep.c (pc_in_linker_stub): Fix unclosed comments.
+
+Wed Jul 28 13:19:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/xm-mips.h: Define HAVE_TERMIOS.
+
+	* dbxread.c (record_minimal_symbol): Don't put gcc_compiled or
+	__gnu_compiled* symbols into the minimal symbols.
+
+Wed Jul 28 08:26:58 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-mips.c (_initialize_remote_mips): Added "timeout" and
+	"retransmit-timeout" variables to set mips_receive_wait and
+	mips_retransmit_wait, respectively.
+
+Wed Jul 28 03:58:58 1993  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symmisc.c (dump_msymbols):  Handle new mst_file_* types.
+
+Tue Jul 27 12:07:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c: Remove old comment about download not implemented.
+
+	* serial.h, ser-{unix,go32,tcp}.c: Add flush_input and send_break.
+	* nindy-share/*, remote-nindy.c: Extensive hacking to make it
+	conform to GDB conventions like using memcpy not bcopy, serial.h,
+	etc.  This is to make it host on Solaris, AIX, etc.
+	* Makefile.in: Reflect removed nindy-share files.
+	* config/i960/nindy960.mt (TDEPFILES): Remove ttybreak.o.
+
+	* stack.c (print_frame_info): Revise comment about `pathological'
+	case (there was a wrong FIXME about text labels; also asm() can
+	trigger this as well as versions of ar which truncate .o names).
+
+	* buildsym.c (start_subfile): If a .c file includes a .C file, set
+	the language of both of them to C++.
+
+	* config/sparc/xm-sun4os4.h: Define MEM_FNS_DECLARED and include
+	<memory.h>.
+	Include <malloc.h> rather than declaring malloc functions ourself.
+
+	* ser-unix.c (set_tty_state): Don't ignore errors setting process
+	group.
+	* inflow.c (terminal_inferior): If attach_flag set, ignore errors
+	from set_tty_state.
+
+	* fork-child.c (fork_inferior): Only quote exec file if needed.
+
+	* mipsread.c (parse_symbol): Remove 21 Jul 93 change with
+	stTypedef inside an stBlock.
+
+Tue Jul 27 12:36:49 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (breakpoint_1):  Walk the breakpoint chain to decide if
+	we have breakpoints or watchpoints as we might have to ignore internal
+	breakpoints.
+
+	Fix gdb core dumps after `file newfile' commands.
+	* symtab.h, symfile.c (clear_symtab_users):  New routine which
+	unconditionally clears symtab users. clear_symtab_users_once
+	commented out as it was a noop anyway.
+	* objfiles.c (free_objfile):  Don't call clear_symtab_users_once.
+	* objfiles.c (free_all_objfiles), symfile.c (new_symfile_objfile),
+	xcoffexec.c (exec_close):  Call clear_symtab_users if necessary.
+	* symfile.c (syms_from_objfile):  Install cleanups for errors during
+	symbol reading.
+	* coffread.c, dbxread.c, mipsread.c, xcoffread.c (*_symfile_read):
+	Lint cleanup code, call do_cleanups explicitly.
+	* symfile.c (symbol_file_add):  Call new_symfile_objfile and
+	reinit_frame_cache _after_ the new symbols are read in.
+
+Tue Jul 27 01:57:01 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_type):  Do not set tag name for compiler
+	generated fake tag names.
+
+Mon Jul 26 17:31:49 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* config/m88k/m88k.mt (TDEPFILES): add exec.o.
+
+Mon Jul 26 13:17:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* hppa-tdep.c: Remove all uses of use_unwind and `set use_unwind'
+	command.  Now we use unwind info by default if we can find it.
+
+	* config/sparc: Move VARIABLES_INSIDE_BLOCK and SUN_FIXED_LBRAC_BUG
+	to tm-sparc.h so they are shared between Solaris and SunOS4.
+	* dbxread.c (process_one_symbol): Deal with SunOS4 acc N_STSYM and
+	N_GSYM functions.
+
+	* config/pa/tm-hppa.h (REGISTER_NAMES): Use "fr" rather than "fp"
+	for floating point registers.
+
+	* mipsread.c (parse_symbol): Put stStaticProc symbols in minimal
+	symbols as mst_file_text.
+
+	* hppa-tdep.c (pc_in_linker_stub): Return 0 if can't read memory.
+
+	* stabsread.c (rs6000_builtin_type): Make logical types be
+	TYPE_CODE_BOOL.
+
+Sun Jul 25 23:41:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.{c,h} (struct breakpoint): Replace symtab field with
+	source_file field.
+
+Fri Jul 23 09:57:25 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote.c: Don't error() on errors xferring memory.
+	* target.h: Clean up comments about *xfer_memory.
+
+	* exec.c, corelow.c (target_ops struct): Don't allow
+	{insert,remove}_breakpoints to be defaulted to
+	memory_{insert_remove}_breakpoint.
+
+	* demangle.c: Make it so `help set dem' tells you how to get the
+	list of demangling styles.
+
+Thu Jul 22 15:41:09 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* Makefile.in: Use REMOTE_O macro not remote.o.
+	* config/i960/{nindy960,vxworks960}: Don't use remote.o.
+
+Thu Jul 22 12:43:25 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* coredep.c: If NEED_SYS_CORE_H defined, include <sys/core.h>
+	(can't include it in nm-*.h file because it causes conflicts with
+	a.out symbol definitions).
+	* hp300ux-nat.c (fetch_core_registers): Commented out; obsolete.
+	* config/m68k/hp300hpux.mh (NATDEPFILES): Added coredep.o and
+	corelow.o.
+	* config/m68k/nm-hp300hpux.h (NEED_SYS_CORE_H): Defined.
+	(REGISTER_U_ADDR): Defined.
+	* config/m68k/xm-hp300hpux.h (HAVE_TERMIOS): Define instead of
+	HAVE_TERMIO.
+	* config/pa/xm-hppah.h: Likewise.
+
+Wed Jul 21 11:37:30 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* mipsread.c (parse_symbol): when stTypedef and friends occur within
+	an stBlock, skip over the fields of the inner one.
+
+	* mips-tdep.c (init_extra_frame_info): If in lenient prologue, call
+	heuristic_proc_desc rather than just assuming registers not saved.
+
+	* Makefile.in (regex.o): Add dependency.
+
+	* hppa{b,h}-nat.c: Warning, not error, if can't access registers.
+
+	* config/pa/hppa{b,h}.h: Define ATTACH_DETACH.
+
+Wed Jul 21 03:07:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/xm-makeva.h:  New file implements va_list alignment
+	restrictions for mips hosts.
+	* config/mips/{xm-irix3.h, xm-mips.h, xm-news-mips.h, xm-riscos.h}:
+	Use it.
+
+Wed Jul 21 00:11:05 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (init_extra_frame_info):  Do not check for
+	mips_in_lenient_prologue if it is a dummy frame.
+	* mipsread.c (fixup_sigtramp):  Initialize pdr.adr, it is used by
+	mips_in_lenient_prologue.
+
+Tue Jul 20 14:14:59 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hp_array_type): Handle "char foo[]".
+
+Tue Jul 20 12:53:47 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* mips-tdep.c (heuristic_proc_start): First time we print the
+	warning, elaborate.
+	(_initialize_mips_tdep): Improve docstring for `set heur'.
+
+	* config/rs6000/tm-rs6000.h: Remove call to insert_step_breakpoint.
+
+	* symtab.c (find_line_symtab): New function, to deal with multiple
+	symtabs with the same name.
+	(find_line_pc{,_range}): Use it.
+	(find_pc_symtab): Add comment about overlapping symtabs.
+
+Mon Jul 19 21:29:14 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (SFILES):  Add nlmread.c.
+	* Makefile.in (OBS):  Add nlmread.o.
+	* Makefile.in (nlmread.o):  Add new target.
+	* configure.in (i[34]86-*-netware):  New configuration.
+	* nlmread.c, config/i386/{i386nw.mt, tm-i386nw.h}:  New files
+	for NLM/NetWare support.
+
+Mon Jul 19 11:48:57 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* symtab.h (enum minimal_symbol_type): Add mst_file_*.
+	* partial-stab.h [DBXREAD_ONLY]: Record statics in miminal symbols.
+	* dbxread.c (record_minimal_symbol): Deal with statics.
+	* minsyms.c (lookup_minimal_symbol): Prefer externals to statics.
+
+	* config/i386/xm-i386sco.h: Define HAVE_TERMIOS.
+
+	* printcmd.c, config/pa/xm-pa.h, config/alpha/xm-alpha.h: Make it so
+	arg_bytes field of makeva_list is always aligned.
+	* config/pa/xm-pa.h: Make arglist_address a char *.
+
+	* ser-unix.c: Don't try to use job control with termio.
+
+Sun Jul 18 23:11:28 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  and Jim Kingdon (kingdon@cygnus.com)
+
+	Make breakpoint_re_set_one work with overloaded member functions,
+	`b 123' and `b foo' if foo is a static function.
+	* symtab.c (decode_line_1, decode_line_2):  New argument `canonical'
+	to return canonical line specs if requested by the caller.
+	* breakpoint.c, source.c, symtab.c, symtab.h:  Change prototypes and
+	callers accordingly.
+	* symtab.c (build_canonical_line_spec):  New helper function which
+	constructs the canonical line spec.
+	* breakpoint.c (break_command_1):  Use canonical line spec instead
+	of command string as addr_string if necessary.
+	* source.c (line_info):  Fix storage leak.
+
+Sun Jul 18 15:22:45 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* infptrace.c: Split out define of PT_KILL; Sequent defines PT_KILL
+	but not the others.
+	* symm-tdep.c: Remove exec_file_command.
+	[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
+	A few miscellaneous cleanups.
+	* symm-nat.c: Renamed from symm-xdep.c.
+	* All symmetry dependent files: Many changes.
+
+	* mips-tdep.c (mips_skip_prologue): New argument lenient.
+	Use read_memory_nobpt.
+	(is_delayed, mips_in_lenient_prologue): New functions.
+	(init_extra_frame_info): If in the prologue, don't use saved registers.
+	* config/mips/tm-mips.h: Declare mips_skip_prologue.
+
+	* partial-stab.h (N_SO): Add the text offset to valu before, not after,
+	passing it to END_PSYMTAB.
+
+Fri Jul 16 18:48:52 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* symtab.c (find_pc_symtab): Call warning, not printf directly.
+
+	* solib.c (solib_add): Use x{re,m}alloc, not {re,m}alloc.
+
+Fri Jul 16 09:56:42 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c: No longer need to undefine ZMAGIC.
+
+Thu Jul 15 18:03:37 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* m88k-pinsn.c: Moved code into opcodes/m88k-dis.c.
+	(print_insn): Now just calls print_insn_m88k.
+
+Thu Jul 15 14:54:05 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* h8300-tdep.c (examine_prologue): Make prototype match definition.
+
+Thu Jul 15 08:34:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* NEWS: Mention that remote.c now has a `load' operation.
+
+	* hppa-tdep.c (pc_in_linker_stub): New function.
+	(find_proc_framesize): Return 0 for linker stubs.
+	(rp_saved): Tell the caller where rp is saved.
+	(frame_chain_valid): Return 1 for linker stubs.
+	(frame_saved_pc): Use return value from rp_saved.
+
+	* stack.c (print_frame_info): When checking PC_IN_CALL_DUMMY,
+	pass the sp relative to the frame in question, not the sp in the
+	innermost frame.
+
+Wed Jul 14 17:37:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mipsread.c (parse_procedure): Take as argument the symtab to look
+	the name up in.  Look it up with mylookup_symbol, not lookup_symbol.
+	(psymtab_to_symtab_1): For stabs, pass the symtab to parse_procedure.
+
+	* mipsread.c (mylookup_symbol): Use strcmp, not STREQ, as we have
+	already checked the first characters.
+
+	Changes from Jeffrey Law:
+	* printcmd.c (makeva_list): Use MAKEVA_EXTRA_INFO to define
+	machine dependent fields in the makeva_list structure.
+	(makeva_size): Allocate extra space to handle gaps made by
+	alignment restrictions.
+	* config/pa/xm-pa.h (MAKEVA_EXTRA_INFO): Define.
+	(MAKEVA_START): Initialize arglist_address field.
+	(MAKEVA_ARG): Always store arguments on natural alignment 
+	boundaries.  Set arglist_address to the address right after
+	the args.  
+	(MAKEVA_END): Simply return the value stored in arglist_address.
+
+Wed Jul 14 13:51:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* ch-valprint.c (chill_val_print, case TYPE_CODE_STRING): Print
+	address, not addr.
+
+	* hppah-nat.c (store_inferior_registers): Don't print i in cases
+	where we aren't using it.
+
+	* a29k-tdep.c (get_saved_register): Fix typo.
+
+Wed Jul 14 09:45:52 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* configure.in: Recognize h8300h (variant of h8300).
+
+Wed Jul 14 09:45:52 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* configure.in: Recognize sparc64-*-*.
+
+Tue Jul 13 14:03:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
+	returning foo' as well as `pointer to foo'.
+
+	* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
+	* config/m68k/tm-m68k.h: Define it.
+	* mem-break.c, breakpoint.c: Improve comments.
+
+Tue Jul 13 13:35:31 1993  Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
+
+	* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
+	* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
+
+Tue Jul 13 11:50:38 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* gdbcore.h (read_memory_integer, read_memory_unsigned_integer):
+	Make prototype match definition.
+
+Tue Jul 13 11:15:15 1993  Fred Fish  (fnf@cygnus.com)
+
+	* elfread.c:  Remove notice about file still being under
+	construction.
+	* Makefile.in (ultra3-xdep.o, umax-xdep.o):  Add missing ')'.
+
+Mon Jul 12 17:46:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* a29k-tdep.c (read_register_stack): Make val static.
+
+Mon Jul 12 14:10:48 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* config/h8300/tm-h8300.h (REGISTER_CONVERTIBLE): Change value to 0.
+	(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Move def'n to
+	usual spot.
+
+Mon Jul 12 11:29:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-valprint.c (c_val_print): Fix thinko with unspecified length
+	arrays.
+
+	* hppa-tdep.c (find_proc_framesize): If there is a frame pointer,
+	use it.
+
+Sun Jul 11 19:35:05 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (decode_line_1): Use end of block to figure out whether
+	val.end is in the same function, not minimal symbols.
+
+	* source.c (line_info): Add a few more wrap_here's.
+
+	* i386-tdep.c (i386_follow_jump): Do byteswapping where needed and
+	don't make assumptions about sizes of host data types.
+
+	* blockframe.c, symtab.h (find_pc_partial_function): New arg endaddr.
+	* infrun.c, breakpoint.c, printcmd.c: Change callers.
+	* printcmd.c (containing_function_bounds): Remove.
+	* printcmd.c (disassemble_command): Use find_pc_partial_function,
+	not containing_function_bounds.
+	* infcmd.c (step_1): Use find_pc_partial_function rather than
+	trying to roll our own.  Move check for a pc between SIGTRAMP_START and
+	SIGTRAMP_END in find_pc_partial_function, not step_1.
+
+	* sparc-tdep.c (sparc_frame_chain, frame_saved_pc):
+	Keep unswapped value in array of char, not REGISTER_TYPE.
+	Use REGISTER_RAW_SIZE not sizeof (REGISTER_TYPE).
+	(sparc_extract_struct_value_address): Use TARGET_PTR_BIT not
+	sizeof (CORE_ADDR).
+
+Thu Jul  1 15:50:05 1993  Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
+
+	* configure.in (m68*-bull-sysv*): added support for Bull dpx2.
+	* config/m68k/{t,x,n}m-dpx2.h, dpx2-nat.c: New files.
+	* config/m68k/dpx2.m{h,t}: New files.
+
+Thu Jul  1 15:46:10 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Run through gnu-indent.
+
+Sun Jul 11 12:32:08 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Fix typo, add
+	more parens around macro arg.
+
+Sat Jul 10 09:54:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c: Remove step_resume_{duplicate,shadow}.  Replace
+	step_resume_break_address with step_resume_breakpoint (now local
+	to wait_for_inferior).
+	({insert,remove}_step_breakpoint): Remove.
+	(wait_for_inferior): Set step resume break with
+	set_momentary_breakpoint.  Test hitting it with bpstat_stop_status
+	and bpstat_what	(stop_step_resume_break removed).
+	* breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct
+	which includes previous return value as main_action, and a step_resume
+	bit.
+	* breakpoint.c (delete_breakpoint): If breakpoint was inserted, and
+	there is another breakpoint there, insert it.
+	* infrun.c (wait_for_inferior): Rearrange the spaghetti a bit.  Use
+	a few more gotos.
+	Various: Clean up and add comments.
+
+	* infrun.c [TDESC]: Remove remaining tdesc code (see ChangeLog
+	for Wed Nov 13 16:45:13 1991).
+
+Fri Jul  9 12:36:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* values.c, value.h (modify_field), callers: Make fieldval a LONGEST.
+
+	* h8300-tdep.c (NEXT_PROLOGUE_INSN): Make pword1 an INSN_WORD *
+	not short *.
+
+	* findvar.c, defs.h
+	({extract,store}_{signed_integer,unsigned_integer,address}):
+	New routines to replace SWAP_TARGET_AND_HOST.
+	All over: All uses of SWAP_TARGET_AND_HOST on integers replaced.
+
+	* config/sparc/tm-sparc.h: Add comment suggesting that removing
+	ins and locals from the registers array might clean things up.
+
+	* utils.c: Clean up comments about wrap buffer and wrap_here.
+	* printcmd.c (printf_command): Call wrap_here before vprintf.
+
+	* mipsread.c (cross_ref): Set the name to unknown for "struct *" case.
+	Patch from ptf@delcam.co.uk (Paul Flinders).
+
+	* a29k-tdep.c, findvar.c (get_saved_register): Fix byteswapping sins.
+
+Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* defs.h, remote-eb.c (TM_FILE_OVERRIDE):  Remove it.
+	* mips-tdep.c (init_extra_frame_info):  Set proper fci->frame if pc
+	is at the start of the dummy code.
+
+Thu Jul  8 14:48:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* sparc-tdep.c (sparc_push_dummy_frame): Skip all the do_save_insn
+	stuff, just write the sp and fp.
+	(sparc_pop_frame): Skip the do_restore_insn; we already restore
+	the sp with the other out registers.
+
+	* hppa-tdep.c (hppa_push_arguments): Allocate enough space for
+	arguments.
+
+	* hppa-tdep.c: Change _initialize_hppab_tdep to _initialize_hppa_tdep.
+
+Thu Jul  8 14:47:00 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* sparc-tdep.c (sparc_frame_chain): Handle sizeof (CORE_ADDR)
+	!= sizeof (REGISTER_TYPE).
+	(frame_saved_pc): Ditto.
+
+Thu Jul  8 08:22:05 1993  Doug Evans  (dje@canuck.cygnus.com)
+
+	* config/h8300/tm-h8300.h: (REGISTER_TYPES): Adjust for h8/300h.
+	(REGISTER_RAW_SIZE): Ditto.
+	(REGISTER_VIRTUAL_TYPE): Use builtin_type_unsigned_long for regs
+	on the h8/300h (ints may still be 16 bits).
+	(EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE,
+	EXTRACT_STRUCT_VALUE_ADDRESS): Add FIXME's for h8/300h.  Some
+	thought needed here.
+
+	* h8300-tdep.c (print_insn): Call print_insn_h8300h if h8/300h.
+	(examine_prologue): reg_save_depth is 4 if h8/300h.
+
+	* findvar.c (read_register): Provide some support for 64 bit regs.
+	(write_register): Ditto.
+
+Wed Jul  7 14:30:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/nm-riscos.h: machine/machparam.h is always the right
+	place to look for BSD43_NBPG, not machine/vmparam.h
+
+	* infcmd.c (run_stack_dummy): New argument name.
+	Change error message in (another) attempt to make it comprehensible.
+	* valops.c (call_function_by_hand): Pass name to run_stack_dummy.
+	* symtab.h: Declare demangle and asm_demangle since macros use them.
+
+	* eval.c (evaluate_subexp): Add comment about calling a member
+	function of a variable in a register.
+
+	* expression.h: Clean up comment about string in STRUCT_STRUCT etc.
+
+	* config/{rs6000/tm-rs6000.h,sparc/tm-sparc.h,pyr/tm-pyr.h},
+	inferior.h (PC_IN_CALL_DUMMY) [ON_STACK]: Add comments about stack
+	frame tops and bottoms.
+
+	* frame.h, blockframe.c, stack.c, a29k-tdep.c,
+	config/gould/tmp-{pn,np1}.h,
+	config/{sparc/tm-sparc.h,pyr/tm-pyr.h,vax/tm-vax.h}: Remove field
+	next_frame from struct frame_info.  It has no purpose beyond
+	->next->frame and is an artifact from GDB 2.8.
+
+Tue Jul  6 11:51:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in: Remove gdb before creating a new one.
+	Update init.c atomically.
+
+	* Makefile.in (ALLPARAM): Add config/{alpha/xm-alpha.h,pa/xm-pa.h}.
+	(ALLCONFIG): Add config/alpha/alpha-osf1.mh.
+
+	* infcmd.c (_initialize_infcmd): In docstring for "continue",
+	describe argument as setting ignore count.
+
+Sun Jul  4 15:04:47 1993  Doug Evans  (dje@cygnus.com)
+
+	* h8300-tdep.c (examine_prologue): Fix call to
+	read_memory_unsigned_integer.
+
+Fri Jul  2 18:22:54 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/{x,n}m-irix{3,4}.h: Make some definitions here
+	rather than including xm-bigmips.h.
+
+	* eval.c (evaluate_subexp): Improve error messages for OP_TYPE and
+	default cases.
+
+	* Makefile.in (distclean): Remove y.tab.h.
+
+Fri Jul  2 14:55:48 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* exec.c (exec_file_command):  Remove Mar 28 hack as BFD handles
+	file updates properly now.
+	* mipsread.c (mips_coff_new_init):  Force reevaluation of sigtramp
+	addresses if switching to a new symbol file.
+	* dbxread.c (process_one_symbol):  Avoid dereferencing NULL
+	symbols that might be returned from define_symbol.
+
+Fri Jul  2 13:33:12 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
+
+	New target macros for getting at the pc, sp and fp.
+	* infcmd.c (read_pc, write_pc):  Modify to use new macros.
+	(read_sp, write_sp, read_fp, write_fp): New functions.
+	* blockframe.c (reinit_frame_cache, get_prev_frame_info):
+	Use new functions.
+	* breakpoint.c (bpstat_alloc): ditto.
+	* infrun.c (wait_for_inferior): ditto.
+	* stack.c (print_frame_info): ditto.
+	* valops (call_function_by_hand): ditto.
+	* corelow.c (core_open): ditto.
+	* h8500-tdep.c: (target_read_sp, target_write_sp, target_read_pc,
+	target_write_pc, target_read_fp, target_write_fp): New functions.
+	* inferior.h (read_sp, write_sp, read_fp, write_fp): Prototypes.
+
+	* config/alpha/xm-alpha.h: Add MAKEVA_END.
+	* config/h8500/tm-h8500.h: Define new macros.
+
+Fri Jul  2 13:51:04 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* configure.in (mipos-*-riscos*): New host and target; use riscos.
+	* config/mips/nm-riscos.h: If BSD43_NBPG is not defined by
+	vmparam.h, include machparam.h.
+	(KERNEL_U_ADDR): Define to be BSD43_UADDR.
+
+Fri Jul  2 13:39:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-exp.y (yylex): Give error if unmatched single quote.
+
+	* configure.in, config/m68k/*delta68*, delta68-nat.c: New port.
+
+	* Remove unused STACK_END_ADDR in the following files (in other
+	files it is used for something): tm-mips.h, tm-sun2.h, tm-news.h,
+	tm-a29k, tm-i386v.h, tm-hppa.h, tm-nindy960.h, tm-amix.h,
+	tm-hp300hpux.h, tm-isi.h.
+
+Thu Jul  1 09:51:27 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/mips/nm-riscos.h: Define NBPG and UPAGES.
+	config/mips/xm-riscos.h: Include <sys/types.h>.
+
+	* ser-unix.c (hardwire_noflush_set_tty_state): Use an assignment,
+	not an initializer, to copy the structure.
+
+	* gdbtypes.h (struct type): Add field tag_name.
+	* gdbtypes.c (type_name_no_tag), c-typeprint.c (c_type_print_base):
+	Use it.
+	* {coff,dwarf,mips,stabs}read.c: Set it.
+
+	* xm-sysv4.h: Undefine HAVE_TERMIO.
+
+	* config/mips/nm-riscos.h: Remove unmatched #endif.
+	Define FETCH_INFERIOR_REGISTERS.
+	* config/mips/riscos.mh: Don't include coredep.o; mips-nat.o is enough.
+	Fix misspelling of NAT_FILE.
+	* mips-nat.c (fetch_core_registers): If KERNEL_U_ADDR is not defined,
+	we can still process "modern" core files.
+
+	* ser-unix.c (hardwire_print_tty_state) [HAVE_TERMIOS]: Don't
+	print c_line.
+	(_initialize_ser_hardwire): Just check whether _POSIX_JOB_CONTROL
+	is defined; don't care what it is defined to.
+
+Wed Jun 30 20:06:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/vax/xm-vaxult2.h: Define FD_SET and FD_ZERO.
+
+Tue Jun 29 11:02:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* inftarg.c: Remove unused include of terminal.h.
+	* signals.h: Don't undefine signals anymore.
+	* main.c: Use job_control from serial.h.
+	* fork-child.c (fork_inferior): Use gdb_setpgid.
+	* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
+	* utils.c (quit): Use current_target->to_terminal_ours to figure
+	out whether we care about lack of job control, rather than __GO32__.
+	* utils.c: Include serial.h not terminal.h
+	(quit): Use job_control not TIOCGPGRP.
+	* terminal.h: Don't undefine TIOCGPGRP.
+	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
+	* utils.c (quit): Use it.
+	* serial.h: Add SERIAL_UN_FDOPEN.
+	* utils.c (quit): Use it.
+	* ser-unix.c: Add process group to ttystate.
+	[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
+	* inflow.c: Include serial.h not terminal.h.
+	Use serial.h stuff to replace most of the maze of #ifdef's.
+	* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
+	* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
+	* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
+	* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
+	Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
+	SERIAL_SET_PROCESS_GROUP.
+	* inflow.c: Use them.
+	* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
+	Define HAVE_TERMIOS.
+	* Various: Remove all use of TIOC*_BROKEN.
+
+Wed Jun 30 12:20:51 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/m68k/tm-sun3.h (BELIEVE_PCC_PROMOTION_TYPE): Define.
+
+Tue Jun 29 13:44:41 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* target.h (target_detach):  Turn macro into function.
+	* target.c (target_detach):  Define it, do deferred register stores
+	before calling the real target function.
+
+Tue Jun 29 13:15:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  and Jim Kingdon (kingdon@cygnus.com)
+
+	* symtab.h (BLOCK_SHOULD_SORT):  Do not sort blocks corresponding to
+	a function to avoid printing of function arguments in wrong order
+	due to sorting.
+	* symfile.c (compare_symbols):  Remove code for sorting arguments
+	as blocks containing arguments are no longer sorted.
+	* symtab.c (lookup_block_symbol):  Update comment accordingly.
+
+Tue Jun 29 11:02:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/pa/tm-hppa.h: Remove unused ARGS_GROW_DOC.
+	(REG_STRUCT_HAS_ADDR): Add comment.
+
+	* infrun.c (wait_for_inferior): Use find_pc_line not find_pc_symtab
+	to check whether there is line number information.
+
+Tue Jun 29 08:29:17 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* remote-udi.c: Fix docstring so that it compiles.
+
+	* remote-mips.c, remote-nindy.c: move bfd.h before symfile.h
+	(for file_ptr).
+
+Tue Jun 29 09:11:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (process_one_symbol): If we find a LOC_BLOCK where we
+	don't expect it, change it to LOC_STATIC so at least we don't coredump.
+
+	* c-typeprint.c (c_type_print_base): Don't error() on invalid type.
+
+	* symtab.h: Add comments about line numbers.
+	* source.c (identify_source_line): Fix off by one bug with line.
+
+Mon Jun 28 19:00:21 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Do not include libhppax.  Instead include libhppa.h
+	and hpux-symtab.h.  Misc indention fixes.
+	(find_unwind_entry): Add PARAM prototype.
+	(read_hpux_symtab): More fixes for names and sizes of structs,
+	unions, enums, typedefs, and tagdefs.
+	(read_hp_enum_type, read_hp_struct_type): Likewise.
+	(read_hp_set_type, read_hp_subrange_type): Likewise.
+	(hp_type_lookup, process_one_debug_symbol): Likewise.
+	(process_one_debug_symbol): Search forward from the K_FUNCTION for
+	the first K_BEGIN when setting the line number associated with a
+	function.  Avoid unnecessary calls to savestring.
+	(hp_alloc_type): Initialize TYPE_CPLUS_SPECIFIC here.  Remove
+	most cases where we set it elsewhere.
+	(hppa_sym_fns): Use "hppa" instead of hppax since hpread.c and
+	paread.c use the same BFD backend now.  All references changed.
+	(hpux_symfile_init): Allocate space to hold the debugging section
+	contents on the symbol obstack.
+
+Mon Jun 28 10:09:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (makeva*): New interface, for making a va_list.
+	(printf_command): Use it.
+	* config/m88k/xm-delta88.h: Remove VPRINTF define, not needed.
+	* config/pa/xm-pa.h: New file.
+	* config/pa/xm-hppa{b,h}.h: Include it.
+
+	* xcoffread.c: Remove obsolete NO_TYPEDEFS comment.
+
+Sun Jun 27 08:54:55 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valprint.c (val_print_type_code_int):  Fix off by one error with
+	eliminating leading zeroes for large little endian integers.
+
+Sun Jun 27 08:58:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/riscos.mh (CC): Use -systype sysv.
+
+	* ser-unix.c: Move #include of <sys/time.h> to HAVE_SGTTY section.
+
+	* Makefile.in (ALLPARAM): Add config/mips/{x,n}-{news-mips,riscos}.h.
+
+Fri Jun 25 11:22:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-m68k.h: Remove obsolete comment about duplicating
+	CALL_DUMMY between different 68k machines.
+
+Fri Jun 25 17:02:45 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* gdbserver/Makefile.in:  Add dependancies on server.h.
+	* gdbserver/remote-gutils.c:  Remove lots of unused functions and
+	variables.
+	* gdbserver/remote-inflow.c:  Remove lots of unused variables and
+	#includes.  Also, use PTRACE_* symbols instead of constants. 
+	(mywait):  Surround calls to wait() with enable/disable_async_io()
+	so that we can be interrupted from GDB while waiting for the
+	child.  Also, handle child exit more gracefully.
+	* gdbserver/remote-server.c:  Remove lots of unused variables.
+	Move all extern defs into server.h.  Redo main loop so that
+	failure from getpkt() causes communications to be re-established.
+	Fix 'k' command so that it restarts the child.
+	* gdbserver/remote-utils.c:  Remove lots of unloved vars and
+	subrs.  Move many extern decls into server.h.  (remote_open):  For
+	tcp, seperate usage of proto fd from connected fd.  Close proto
+	fd after getting connection.  (putpkt/getpkt):  Pay attention to
+	errors when reading/writing.  Report these to the caller.  New
+	routines input_interrupt/enable_async_io/disable_async_io to make
+	it possible to get an I/O interrupt when data arrives from the
+	comm link.
+	* serial.h:  New file to contain common defs for all remote files.
+
+Fri Jun 25 17:02:45 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* remote.c:  Add arg names to prototypes, in a modest effort at
+	clarification.  Also add prototypes for some new functions.
+	* (remote_wait):  Better error reporting for 'T' responses.
+	* ser-go32.c (strncasecmp):  Make str1 & str2 be const.
+	* (dos_async_init):  Make usage message reflect requested port #.
+	* ser-tcp.c (tcp_open):  Terminate hostname properly to prevent
+	random hostname lookup failures.  Add nicer message for unknown
+	host error.  (wait_for):  Wake up in case of exceptions.  Also,
+	restart select() if we got EINTR.
+	* ser-unix.c (wait_for):  Restart select() if we got EINTR.
+	* serial.c: (serial_close):  Clean up code.
+
+Fri Jun 25 11:22:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-m68k.h: Remove obsolete comment about duplicating
+	CALL_DUMMY between different 68k machines.
+
+Fri Jun 25 11:22:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (*.tab.c): Use ./c-exp.tab.c not just c-exp.tab.c.
+	Make comment explaining this comprehensible.
+	(TAGFILES): Include ALLDEPFILES.
+	(ALLDEPFILES): udi2soc.c and udr.c are in 29k-share/udi, not
+	29k-share/udi/udi.
+	(update-alldeps): Remove; obsolete.
+
+	* remote.c: Move comments regarding packets to top of file with the
+	rest of the protocol comments.
+	Fix incorrect description of 'T' response.
+
+	* README (Reporting Bugs): Refer people to the GDB manual.
+
+	* c-valprint.c (c_val_print): Handle TYPE_CODE_BOOLEAN.
+	* stabsread.c: Type -16 is 4 bytes.
+
+	* remote-udi.c: Improve docstring.
+
+Fri Jun 25 11:16:31 1993  Fred Fish  (fnf@cygnus.com)
+
+	* elfread.c (elf_symfile_read):  Call bfd_elf_find_section, not
+	bfd_elf32_find_section, to track bfd changes.
+
+Fri Jun 25 11:22:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/riscos.mh (REGEX{,1}, MUNCH_DEFINE, MH_CFLAGS): Define.
+	* config/mips/xm-riscos.h: Define USG.
+
+Thu Jun 24 14:52:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (filename_completer): Don't complete to files ending in ~.
+
+	* NEWS: Mention filename completion and "info line" enhancements.
+
+	* main.c (symbol_completion_function): On "info t foo", return NULL,
+	don't error().
+
+	* main.c (symbol_completion_function): Don't use readline word
+	breaking.  Use new calling convention for c->completer and
+	complete_on_cmdlist.
+	* command.h (struct command): Change arguments; now the text passed
+	to completer does not have any word breaking done.  New arg word.
+	* symtab.{c,h} (make_symbol_completion_list): Do word breaking.  Take
+	word argument.
+	* {main.c,gdbcmd.h} ({filename,noop}_completer): Take word argument.
+	* command.{c,h} (complete_on_cmdlist): Take word argument.
+
+	* command.c (lookup_cmd_1): Doc fix.
+
+Thu Jun 24 13:26:04 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* Makefile.in (OP_INCLUDE): define.
+	  (OPCODE_CFLAGS): use OP_INCLUDE.
+
+	* config/i386/ncr3000.mh, config/i386/i386v4.mh,
+	config/i386/i386sol2.mh, config/m68k/hp300hpux.mh,
+	config/m68k/amix.mh, config/mips/irix[34].mh,
+	config/m88k/delta88.mh, config/sparc/sun4sol2.mh (ALLOCA,
+	ALLOCA1): macros removed.
+
+	* config/mips/decstation.mh, config/rs6000/rs6000.mh
+	(MMALLOC_LIB): renamed to MMALLOC.
+
+Wed Jun 23 00:25:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* partial-stab.h: Consolidate case statements for N_LSYM and N_FUN.
+	* dbxread.c: Change comment regarding acc.
+
+Wed Jun 23 16:33:36 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Document a few functions, misc cleanups.  Update
+	copyright to reflect the first "release" of this file.
+	(struct hpux_symfile_info): Delete unneeded fields.  Keep pointers
+	to the contents of the debug sections rather than offsets within
+	the file itself.  Corresponding changes to the accessor macros.
+	(sl_symbol_size, slt_symbuf): Delete unneeded global variables.
+	(slt_symbuf_start, slt_symbuf_end, lntt_symbuf): Likewise.
+	(lntt_symbuf_start, lntt_symbuf_end, gntt_symbuf): Likewise.
+	(gntt_symbuf_start, gntt_symbuf_end): Likewise.
+	(fill_slt_symbuf, fill_lntt_symbuf): Delete unneeded functions.
+	(fill_gntt_symbuf): Likewise.
+	(get_lntt, get_gntt, get_slt): Simplify.
+	(hpux_symfile_init): Read and store the contents of the debugging
+	sections.  Do error checking on memory allocation and BFD calls.
+	(read_hpux_symtab): Delete KERNELDEBUG crud.  Ignore debug symbols
+	which are not needed for building partial symbol tables.  Handle
+	K_CONST, K_TYPEDEF, and K_TAGDEF just like K_SVAR and K_DVAR.
+	(read_ofile_symtab): Delete useless processing_gcc_compilation stuff.
+	(read_hp_struct_type): Initialize TYPE_CPLUS_SPECIFIC.
+	(read_hp_set_type, read_hp_array_type): Likewise.
+	(read_hp_subrange_type, hp_type_lookup): Likewise.
+
+Wed Jun 23 15:04:54 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	Makefile overhaul dropping autodepend features.
+	* Makefile.in: many comment changes.  forced consistent use of $()
+	  for makefile variables references.  dropped leading ./ in file
+	  references.  Drop $(srcdir)/ prefix on all dependencies.
+	  Inserted contents of alldeps.mak and depend.
+	  (INCLUDE_CFLAGS): defined as new macro for getting libiberty's
+	  include directory into the compilation line.
+	  (GDB_CFLAGS): new macro to take up the semantic previously held
+	  by INCLUDE_CFLAGS.
+	  (LIBIBERTY): dropped ancient subdir macro.  I last removed this
+	  macro in feb of '92.  How does it keep coming back?
+	  (MMALLOC_LIB): renamed to MMALLOC.
+	  (BFD_SRC_DIR): renamed to BFD_SRC.
+	  (BFD_OBJ_DIR): renamed to BFD_DIR.
+	  (BFD_LIB): renamed to BFD.
+	  (BFD_INCLUDES): renamed to BFD_CFLAGS.
+	  (READLINE_DIR): now represents object directory.
+	  (RL_LIB): renamed to READLINE.
+	  (READLINE_SRC, READLINE_CFLAGS, OPCODES, OPCODES_CFLAGS): new
+	  macros.
+	  (INTERNAL_CFLAGS): added GDB_CFLAGS, OPCODES_CFLAGS,
+	  READLINE_CFLAGS, BFD_CFLAGS.  Dropped USER_CFLAGS.
+	  (LDFLAGS): removed default assignment.
+	  (TEXIDIR, INCLUDE_DEP, MMALLOC_DIR, MMALLOC_DEP, BFD_DEP,
+	  READLINE_DEP, LIBIBERTY_DIR, TESTS, depend, STAGESTUFF): unused, so removed.
+	  (ALLOCA1, ALLOCA): removed all references.  alloca is now in
+	  libiberty.
+	  (VERSION): unilaterally and arbitrarily bumped to 4.9.3.
+	  (SFILES, NONSRC, HFILES, ALLDEPFILES, ALLPARAM, ALLCONFIG):
+	  removed all $(srcdir) prefixes.
+	  (getopt_h, ieee-float_h, bfd_h, wait_h, dis-asm_h): new macros
+	  for potential dependencies.  commented out by default.
+	  (readline_headers, udiheaders): convenient abbreviations.
+	  (gdbcore_h, frame_h, symtab_h, gdbtypes_h, expression_h,
+	  value_h, breakpoint_h, command_h, gdbcmd_h, defs_h, inferior_h):
+	  new macros used for header file dependencies.
+	  (install-info, clean-info): collapse into the info rule.
+	  (install): now depends on all.
+	  (install-only): new target for installing without depending on
+	  all.
+	  (uninstall): new target.
+	  (config-check, config-check-hosts, config-check-targets): added
+	  fixme comments.
+	  (ch-exp.tab.c, m2-exp.tab.c): added artificial dependencies in
+	  order to force parallel makes into keeping these rules separate.
+	* configure.in: omit cat'ing depend file onto generated Makefile.
+	* alldeps.mak, depend: removed.
+
+	* inferior.h: remove redundant include of symtab.h which is
+	included in value.h via breakpoint.h.
+
+	* alloca.c: removed.  alloca is now in libiberty.
+
+	* config/m88k/delta88.mh, config/ns32k/merlin.mh (M_UNINSTALL):
+	new macro to undo what M_INSTALL does.
+
+Wed Jun 23 00:25:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/ns32k/{merlin.mh,xm-merlin.h}: Be consistent about name
+	of gdb-sh.
+
+	* dbxread.c (copy_pending): Change name and function of begi argument
+	to endi, since that is what the caller needs.
+
+	* Makefile.in (TAGFILES): Don't include YYFILES.
+
+	* Makefile.in (HFILES): Include monitor.h.
+
+	* Makefile.in: Include text that used to be in alldeps.mak.
+	Remove config/mips/{bigmips.mh,xm-bigmips} from it.
+	* Makefile.in, configure.in: Remove all traces of alldeps.mak.
+
+	* main.c (main): Print help message on stdout not stderr
+	per standards.texi.
+	New option --version per standards.texi.
+	In help message, show long options with "--" not "-".
+	Don't try to print help message or version until after we have
+	called initialize_all_files.
+
+Tue Jun 22 11:03:13 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Delete useless #if 1 statements.
+	(hp_type_translate): Use T_LONG, T_UNS_LONG, and T_DOUBLE instead
+	of magic integers.  Fix handling for T_UNS_INT.  Abort if the type
+	passed in is not an "immediate" type.
+	(read_hp_enum_type): Properly compute the size of the type.
+	(read_hp_array_type): Likewise.
+	(hp_type_lookup): Prefix the names of structs, unions and enums
+	with "struct", "union", and "enum" as appropriate.
+
+Tue Jun 22 03:15:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* solib.c (solib_add_common_symbols): Don't call lookup_minimal_symbol.
+	(solib_add): Call special_symbol_handling once, not once per library.
+
+	* procfs.c (procfs_resume): Don't pass a SIGTSTP whose action
+	is SIG_DFL.
+
+	* procfs.c (procfs_resume): Skip the unnecessary PRSVADDR on all
+	systems, not just Solaris.
+
+	* stabsread.c: Include <ctype.h>.
+
+Mon Jun 21 16:09:46 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* fork-child.c (fork_inferior): Quote exec_file so it can contain
+	funky characters.
+
+Mon Jun 21 16:56:47 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (INCLUDE_CFLAGS):  Add BFD_INCLUDES for now, since
+	bfd.h is included by target.h, which most of gdb includes.
+	* depend:  Hand remove BFD_INCLUDES from ${CC} lines, now that
+	it's in INCLUDE_CFLAGS.
+
+Mon Jun 21 16:09:46 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/i386/*aix*, i386aix-nat.c: New files.
+	* configure.in: Use them.
+	* alldeps.mak: List them.
+	* coffread.c (decode_base_type): Deal with anonymous enum type.
+	* i387-tdep.c (print_387_status_word): Add comment re "top".
+	* i386-tdep.c [I386_AIX_TARGET] (i386_extract_return_value): New func.
+	* dbxread.c: Use SEEK_SET and SEEK_CUR, not L_*.  Define them if and
+	only if not defined by a header file.
+	* mipsread.c: Don't define L_SET or L_INCR.
+
+Mon Jun 21 15:10:07 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (BFD_INCLUDES):  Bfd.h is now back in bfd build dir.
+	* depend:  Hand updated to match.
+
+Mon Jun 21 10:13:42 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Include "demangle.h".
+	(process_one_debug_symbol): Set the SYMBOL_LANGUAGE and
+	SYMBOL_INIT_DEMANGLED_NAME for the current symbol.  Adjust
+	SYMBOL_VALUE for local variables in the stack by the size of the
+	current function's stack (found in unwind descriptor).  Keep
+	better track of the current unwind descriptor. 
+
+Sun Jun 20 13:11:11 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabsread.c (read_struct_fields): Don't call read_cpp_abbrev on $_.
+	(read_cpp_abbrev): Don't complain specially for $_.  Also return 0 if
+	we don't recognize the abbrev.
+
+Sun Jun 20 00:24:41 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* solib.c (solib_add_common_symbols): Add comment about performance.
+
+Fri Jun 18 12:37:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/{{x,n}m-riscos.h,riscos.mh}: New files.
+	* configure.in (mips-*-sysv*): Use riscos for host, bigmips for target.
+
+	* config/mips/{{x,n}m-news-mips.h,news-mips.mh}: New files.
+	* config/mips/{bigmips.mh,xm-bigmips.h}: Remove.
+	* configure.in (mips-sony-*): Use news-mips for host.
+
+	* buildsym.h: Doc fix for processing_acc_compilation.
+
+Thu Jun 17 19:57:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_formatted): Don't use tab in wrap_here arg.
+
+Thu Jun 17 17:29:30 1993  Jim Kingdon  (kingdon@lisa.cygnus.com)
+
+	* Makefile.in (INTERNAL_CFLAGS): Include ../include as well as
+	${srcdir}/../include.
+
+	* config/m88k/xm-delta88.h: Comment out unused defines which conflict
+	with system headers.
+	* printcmd.c (printf_command): Cast second arg to vprintf to PTR.
+	Use VPRINTF macro if defined.
+	* config/m88k/xm-delta88.h: Define VPRINTF.  Include <sys/siginfo.h>.
+	Define TIOC{GETC,GLTC}_BROKEN.
+	* m88k-nat.c: Uncomment include of <sys/ptrace.h>.
+	* main.c: Rename initialize_{main,cmd_lists,history} to init_* to
+	make things easier on munch (apparently this matters on
+	the delta88 with svr3).
+
+Thu Jun 17 16:53:56 1993  david d `zoo' zuhn (zoo@cygnus.com)
+	
+	* Makefile.in: canonicalize install.sh; for use within
+	this directory (and subdirs)
+
+Tue Jun 15 17:01:23 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* Makefile.in: remove parentdir support; use INSTALL_XFORM
+
+Thu Jun 17 15:08:35 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
+
+	* configure.in (alpha-*-osf*), config/alpha/alpha-osf.mh: New
+	host.
+	* sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard
+	wired (and wrong) constant.
+	* values.c (unpack_long): Add case to unpack when target object is
+	sizeof(int).
+	* config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the
+	simulator defines.
+
+Wed Jun 16 16:08:18 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* NEWS: tracking user visible changes starting with
+	vxworks-timeout.
+
+	* remote-vx.c (_initialize_vx): rename user settable option from
+	rpcTimeout to vxworks-timeout.
+
+Wed Jun 16 14:34:10 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hp_type_translate): Fix promotion bugs from
+	char to short and short to int.
+
+Wed Jun 16 12:21:49 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (depend):  More makefile diddling.
+	* alldeps.mak, depend:  Update to latest automatically built
+	versions.
+
+	* Makefile.in (depend):  Bfd.h keeps moving, keep up with it.
+	* alldeps.mak, depend:  Update to latest automatically built
+	versions.
+
+Tue Jun 15 12:26:05 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* remote-vx.c: include gdbcmd.h for setlist.
+	  (_initialize_vx): make rpcTimeout user settable.
+
+Mon Jun 14 09:23:51 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* main.c, gdbcmd.h: Add function filename_completer.
+	* main.c, symfile.c, source.c, exec.c, core.c: Use it for
+	"directory", "source", "cd", "symbol-file" "add-symbol-file",
+	"load", "file", "exec-file", "core-file" commands.
+	(But '/' is a word break, limiting usefulness; see comments).
+
+	* source.c (mod_path): Warning not error if can't find directory.
+
+	* isi-xdep.c: New file.
+	* config/m68k/isi.mh (XDEPFILES): Add isi-xdep.o
+
+Sun Jun 13 09:17:48 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/m68k/xm-news.h: Include <sys/param.h>.
+
+	* m88k-tdep.c (IEEE_isNAN): Remove.
+	config/m88k/tm-m88k.h (INVALID_FLOAT): Return 0.  This was the same
+	broken isNAN as on the mips.
+
+	* valprint.c (_initialize_valprint): Use c->function.sfunc not just
+	c->function.
+
+	* dbxread.c (process_one_symbol): If SUN_FIXED_LBRAC_BUG is not
+	defined, don't worry about Sun's silly LBRAC bug.
+	* config/m68k/tm-sun3.h: Define SUN_FIXED_LBRAC_BUG to 0.
+
+	* dbxread.c (process_one_symbol): If there's a symbol before an
+	N_SO, don't error().
+	(case N_BCOMM): complain () not error ().
+
+	* defs.h, main.c (catch_errors): Add return_mask arg.
+	stack.c (print_frame_info): Pass RETURN_MASK_ERROR.
+	other callers: Pass RETURN_MASK_ALL.
+	(return_to_top_level), callers: Add return_reason arg.
+	* utils.c (quit):
+	Use return_to_top_level (RETURN_QUIT) instead of error ().
+	* main.c (main), tm-nindy960.h (ADDITIONAL_OPTION_HANDLER):
+	Use SET_TOP_LEVEL not setjmp (to_top_level).
+	* remote-nindy.c: Use catch_errors not setjmp (to_top_level).
+
+Sat Jun 12 14:40:54 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* solib.c (solib_create_inferior_hook) [SVR4_SHARED_LIBS]:
+	Don't try to get the debug base yet.
+
+	* dbxread.c (process_one_symbol): Set n_opt_found based on whether
+	a non-gcc N_OPT symbol is found.  Make SUN_FIXED_LBRAC_BUG a macro
+	which returns 0 or 1 to say whether to do it.
+	* config/sparc/sun4{sol2,os4}.h
+	(SUN_FIXED_LBRAC_BUG,VARIABLES_INSIDE_BLOCK): Use n_opt_found so
+	the right thing happens for both acc and SunOS4 /bin/cc.
+
+	* valprint.c (print_hex_chars): Use local_hex_format_{pre,suf}fix.
+	* printcmd.c (print_scalar_formatted): Use val_print_type_code_int.
+
+	* mips-tdep.c: Remove isa_NAN; it assumed sizeof(host int) == 4 and
+	probably contained byte-order sins too.
+	config/mips/tm-mips.h (INVALID_FLOAT): Define to 0 like most machines.
+	The IEEE_FLOAT code in print_floating takes care of it.
+
+Sat Jun 12 14:47:04 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.9.2.
+	* c-valprint.c (c_val_print):  For array of chars printed with
+	string syntax, don't print the address of the array.  From
+	bothner@cygnus.com.
+	* c-exp.y (yylex): Recognize '.' as indicating a floating point
+	number regardless of the radix.  From wilson@cygnus.com.
+	* valprint.c (set_input_radix_1, set_output_radix_1):  New
+	prototypes and functions that do the actual radix setting work.
+	* valprint.c (set_radix, set_output_radix, set_input_radix):
+	Rewrite to use set_input_radix_1 and set_output_radix_1.
+	* valprint.c (initialize_valprint):  Enable commands to
+	independently set and show input and output radices.
+	* valprint.c (show_radix):  New prototype and function that
+	handles separate input and output radices.
+
+Fri Jun 11 18:39:38 1993  Ken Raeburn  (raeburn@cygnus.com)
+
+	Patches from Jeff Law, law@cs.utah.edu:
+	* hppa-pinsn.c: Now uses disassembler from opcode library,
+	this contains only the stub function print_insn.
+
+Fri Jun 11 15:19:59 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* main.c (main): back to two periods for elipse.
+	  (print_gdb_version): revised format for configuration info.
+
+Fri Jun 11 10:24:35 1993  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h (INT_MAX):  Cast unsigned shift result to int.
+
+Fri Jun 11 10:17:41 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* dbxread.c (process_one_symbol): Rather than having
+	BLOCK_ADDRESS_FUNCTION_RELATIVE a macro, make it a variable which
+	is true if we are doing stabs-in-elf, false otherwise.
+	config/sparc/tm-sun4sol2.h: Don't define it.
+
+Fri Jun 11 13:33:40 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-mips.c (mips_send_packet): Don't print garbage character
+	in debugging info.
+	(mips_request): Don't check that remote pid is 0, because
+	sometimes it isn't.
+	(mips_fetch_registers): Pass a pointer to SWAP_TARGET_AND_HOST,
+	not an integer.
+
+Fri Jun 11 10:17:41 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stack.c (print_frame_info): Use catch_errors around print_frame_args.
+
+	* Makefile.in (install): Don't depend on gdb.
+
+	* Rename remote-es1800.c to remote-es.c
+	and remote-st2000.c to remote-st.c for 14-char filenames.
+	config/m68k/{es1800,st2000}: Use the new names.
+
+	* mips-tdep.c (isa_NAN): Don't return true on -0.
+
+Fri Jun 11 10:24:35 1993  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h (INT_MAX):  Cast unsigned shift result to int.
+
+Thu Jun 10 13:26:41 1993  Fred Fish  (fnf@cygnus.com)
+
+	* elfread.c (elf_symtab_read):  Add bfd section address to bfd
+	symbols, now that they are section relative.
+	* solib.c (bfd_lookup_symbol):  Ditto.
+
+Thu Jun 10 11:27:34 1993  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hp_function_type): Adjust SYMBOL_VALUE for
+	arguments in the stack by the size of the current function's stack
+	(found in the unwind descriptor).
+	(process_one_debug_symbol): Likewise.  Keep track of the current
+	function's unwind descriptor.
+
+Thu Jun 10 10:56:56 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Makefile.in (depend): Add bfd -I's for paread.c and xcoffexec.c
+	depend: Updated accordingly.
+
+Wed Jun  9 16:08:44 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Makefile.in (*.tab.c): Use mv for atomic update.
+
+	* Makefile.in ({dist,real}clean): Also remove nm.h.
+	(realclean): Also remove ${TESTS}, y.output, yacc.{acts,tmp}.
+	(distclean): Don't rebuild *.tab.c or TAGS.
+
+Wed Jun  9 12:56:58 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in (version.c): add host and target names to version.c.
+	* main.c (main): print three periods for the elipse.
+	  (print_gdb_version): also print configuration.
+
+	* udi/udiids.h, udi/udip2soc.c, udi/udiphcfg.h, udi/udiphunix.h,
+	  udi/udiproc.h, udi/udipt29k.h, udi/udiptcfg.h, udi/udisoc.h,
+	  udi/udr.c: Change AMD copyrights to FSF copyleft '93.
+
+	* remote-eb.c (get_hex_regs, eb_fetch_registers), remote-adapt.c
+	  (get_hex_regs, adapt_fetch_registers): cast args to
+	  supply_register to avoid gcc warning.
+
+	* config/a29k/a29k.mt (TDEPFILES): drop minimon support.  It
+	  doesn't compile on solaris and is now obsolete.
+
+	* config/sparc/sun4os4.mh (XM_CLIBS): remove -lresolv.  This
+	  breaks stock sunos installations.
+
+Wed Jun  9 06:14:33 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* m68k-stub.c: Add comment about frame cache.
+
+	* target.h (target_store_registers): Doc fix re error handling.
+
+	* findvar.c (write_register): Call SWAP_TARGET_AND_HOST regardless
+	of register_valid[regno].
+
+Tue Jun  8 14:42:10 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* symtab.h, dwarfread.c: Doc fix re dependencies.
+
+Tue Jun  8 17:54:09 1993  Rob Savoye  (rob@rtl.cygnus.com)
+
+	* serial.c (serial_close): If scb is NULL, don't try to close
+	it. 
+	* configure.in: Add support for rom68k and bug boot monitors.
+
+Tue Jun  8 17:39:12 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
+
+	* coffread.c (init_stringtab): Fix bug where sizeof(long) != 4.
+	* gdbcore.h, core.c (read_memory_unsigned_integer): New function.
+	* findvar.c (read_register, write_register): Fix thinko where
+	sizeof(host long) != sizeof(target int).
+	* h8300-tdep.c: Use new read_memory_unsigned_integer call.
+	* sh-tdep.c (_initialize_sh_tdep): Add memory_size command.
+
+Tue Jun  8 14:42:10 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* Move config/m68k/tm-m68k.h (FRAME_FIND_SAVED_REGS) to
+	m68k-tdep.c (m68k_find_saved_regs).  Don't duplicate code between
+	68881 and non-68881 cases.  Check for a pair of movel instructions.
+
+Tue Jun  8 14:52:55 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	First cut at sparc-vxworks targetting.
+	* config/sparc/tm-vxsparc.h, config/sparc/vxsparc.mt: new files.
+	* configure.in: sparc-vxworks gdb_target now vxsparc.
+
+	* remote-eb.c, remote.c: symfile.h requires bfd.h so include it.
+
+Tue Jun  8 14:42:10 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* config/m68k/xm-news.h: add "extern int errno".
+
+Tue Jun  8 13:45:07 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
+
+	* remove-vx.c (vx_read_register, vx_write_register): collapse
+	  ifdef I80960 else (assumes) m68k into parameterizable macros
+	  VX_NUM_REGS and VX_SIZE_FPREGS.
+	* config/m68k/tm-vx68.h, config/i960/tm-vx960.h (VX_NUM_REGS,
+	  VX_SIZE_FPREGS): new definitions.
+
+Tue Jun  8 11:08:29 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* symfile.{c,h} (generic_load): New function.
+	remote{,-nindy,-eb,-mips}.c: Use it.
+
+Mon Jun  7 20:07:30 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (depend):  More sed gubbish to deal with
+	../bfd/bfd.h being generated during the build.
+	* depend:  Re-done with corrected makefile.
+
+Mon Jun  7 16:32:05 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (BFD_SRC_DIR):  Renamed def and usages from BFD_DIR.
+	* Makefile.in (BFD_OBJ_DIR):  New definition for the bfd build
+	directory to find automatically generated header files and library.
+	* Makefile.in (BFD_LIB):  Use BFD_OBJ_DIR.
+	* Makefile.in (LINTFLAGS):  Include BFD_OBJ_DIR.
+	* Makefile.in (saber_gdb):  Include BFD_OBJ_DIR.
+	* Makefile.in (depend):  Include BFD_OBJ_DIR in gcc args.
+	* Makefile.in (paread.o, xcoffexec.o):  Remove, now in depend.
+	* depend, alldeps.mak:  Rebuild after Makefile.in changes.
+
+Fri Jun  4 10:18:51 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* configure.in: change lynx support to CPU-*-lynxos*
+
+	* Makefile.in (subdir_do): change test from existence of directory
+	to existence of Makefile (the directory may exist but not be configured)
+
+Thu Jun  3 01:18:51 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* config/sparc/xm-sun4sol2.h: define MEM_FNS_DECLARED
+
+Fri Jun  4 10:43:33 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* configure.in (mips-idt-ecoffl*): New target; use idtl.
+	(mips-idt-ecoff*): Added trailing '*'.
+	* config/mips/idtl.mt: New file; like idt.mt, but little endian.
+
+Thu Jun  3 17:36:56 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* ser-go32.c:  Clean up lots of compilation nits.
+
+Thu Jun  3 14:44:57 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Patches from Jeffrey Law <law@cs.utah.edu>.
+	* hppab-nat.c: Eliminate unnecessary ifdefs for
+	FETCH_INFERIOR_REGISTERS, CANNOT_FETCH_REGISTER, and
+	CANNOT_STORE_REGISTER.
+	(fetch_register): Delete code to handle CANNOT_FETCH_REGISTER.
+	* hppa-pinsn.c: Support 'I', 'J', and 'K' in output
+	templates for 1.1 FP computational instructions.
+
+Thu Jun  3 03:34:49 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in:  Remove ser-tcp.[co].  (Use XDEPFILES instead.)
+	* alldeps.mak, depend:  Rebuild to account for ser-tcp.
+	* config/sparc/sun4os4.mh:  Add ser-tcp to XDEPFILES.
+	* gdbserver/Makefile.in (gdbserver):  Use -lbsd.
+	* gdbserver/remote-inflow{-sparc}.c (create_inferior):  Don't use a
+	shell when running the child, as args have been expanded by the
+	time we get here.  Simplify calling convention.
+	* gdbserver/remote-server.c (main):  Use new calling convention
+	for create_inferior, remove defunct code for coalescing argv.
+	Remove extra calls to mywait(), as we no longer have to wade
+	through a shell.
+
+	* target.c (target_read_memory_partial):  Don't deref errnoptr
+	when checking for null pointer.
+
+Wed Jun  2 19:58:46 1993  John Gilmore  (gnu@cygnus.com)
+
+	* remote-es1800.c:  Fix typo.
+
+Tue Jun  1 21:22:39 1993  Fred Fish  (fnf@cygnus.com)
+
+	* target.c (target_read_memory_partial):  Like target_read_memory,
+	but does partial reads, such as reads that bump into the end of
+	the address space.
+	* target.h (target_read_memory_partial):  Add prototype.
+	* valprint.c (PRINT_MAX_DEFAULT):  New define, initial value 200.
+	* valprint.c (val_print_string):  Complete rewrite to fix bug with
+	bumping into end of memory, avoiding unnecessarily long reads, and
+	fixing bug when print_max is set to 0 (unlimited print length).
+	* valprint.c (_initialize_valprint):  Use PRINT_MAX_DEFAULT to
+	initialize print_max.
+
+Tue Jun  1 18:11:35 1993  Rob Savoye  (rob at darkstar.cygnus.com)
+
+	* configure.in: Add support for rom68k and bug boot monitors.
+
+Mon May 31 10:37:04 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* printcmd.c (print_scalar_formatted): Print integers bigger than
+	LONGEST in hex no matter how big, and no matter what the format
+	and size.
+
+	* stabsread.c (read_type): Skip type attributes if present.
+
+	* stabsread.c (read_huge_number): Don't accept '0' + radix as part
+	of number, just through '0' + radix - 1.
+
+Sun May 30 15:35:21 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (SER_HARDWIRE):  Temporarily comment out ser-tcp.o.
+
+	* {dbxread.c, dwarfread.c} (read_ofile_symtab):  Rewrite to take
+	single parameter, the pointer to the partial symtab, rather than
+	a bunch of args that are derived from the partial symtab.  Change
+	prototypes and callers to match.
+
+	* dbxread.c (read_ofile_symtab):  Remove "#if 1" around code to
+	set demangling style automatically.
+	* defs.h (CPLUS_MARKER):  Clarify comment that this is only for
+	GNU C++, not C++ in general.
+	* symtab.h (general_symbol_info):  Simplify by eliminating one
+	structure level for the language dependent info.
+
+Sat May 29 15:59:29 1993  Fred Fish  (fnf@cygnus.com)
+
+	* c-typeprint.c (c_type_print_base):  Avoid dereferencing NULL
+	names for TYPE_CODE_STRUCT and TYPE_CODE_UNION types.
+	TYPE_CODE_ENUM was already testing for this.
+
+Fri May 28 17:18:05 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in:  Add new file ser-tcp.c.
+	* defs.h (memcmp):  Add decl for memcmp to #ifndef MEM_FNS_DECLARED.
+	* findvar.c (write_register):  See if we are writing back the same
+	value that's already in the register.  If so, don't bother.
+	* remote.c (putpkt, getpkt):  Improve handling of communication
+	problems.
+	* ser-go32.c:  Prototype it to death.  Update serial_ops and add
+	dummy routines where appropriate.
+	* ser-tcp.c:  New module to implement serial I/O via TCP
+	connections.
+	* ser-unix.c:  Clean up getting/setting of tty state.  Get rid of
+	SERIAL_RESTORE, add SERIAL_{GET|SET}_TTY_STATE interfaces.
+	* serial.c:  Add start of support for connect command.
+	(serial_open):  Distinguish between tcp and local devices.
+	* serial.h (struct serial_ops):  Get rid of restore, add
+	get_tty_state and set_tty_state.  Define protoypes and macros for
+	this mess.
+	* gdbserver/remote-utils.c:  Add tcp support.  (readchar):  Do
+	some real buffering.  Handle error conditions gracefully.
+	* gdbserver/remote-inflow-sparc.c:  Update to remote-inflow.c
+	(Lynx), remove lots of cruft.
+
+Fri May 28 17:24:51 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* printcmd.c (print_address_symbolic): turn this into an assigment
+	instead of an initialization (many compilers don't accept
+	structure initialization). 
+
+Thu May 27 16:56:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): If several program csects in one
+	source file, give them all the name of the source file, rather than
+	the 2nd and subsequent ones having NULL names.
+
+Thu May 27 06:16:56 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* printcmd.c (print_address_symbolic):  Append source filename and
+	linenumber of the symbol if print symbol-filename is on.
+	(initialize_printcmd):  `set print symbol-filename'.
+
+Wed May 26 13:46:16 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Add config for Lynx target.  Configure gdbserver
+	only for Lynx.  Re-do selective configuration of sparclite.
+
+	* gdbserver/{remote-gutils.c remote-server.c Makefile.in
+	configure.in remote-inflow.c remote-utils.c}:  New files to
+	support GDB remote server.  Currently only works for Lynx.
+
+Wed May 26 10:28:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (define_symbol, case 't'): Only set the name if it
+	is not a pointer type.
+
+	* stabsread.c (define_symbol): Clean up logic; move the read_type
+	calls to inside the switch statement (this improves the error
+	handling).
+
+	* mipsread.c (parse_symbol, parse_partial_symbols): Deal with Fortran
+	common blocks.
+
+Tue May 25 20:44:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_formatted, case 'i'): Pass a tab to wrap_here.
+
+	* source.c (line_info): Change "pc" to "address" in messages and
+	use print_address for addresses.
+
+	* source.c (line_info): If we don't find a symtab, print more useful
+	output, including the symbolic address.
+
+	* source.c (line_info): If --fullname, display the source.
+	(identify_source_line), callers: Take pc as argument, rather than
+	assuming innermost frame (emacs doesn't use this, so no one ever
+	noticed).
+	* symtab.h: Declare frame_file_full_name.
+	* main.c: Don't.
+
+Tue May 25 15:30:43 1993  Brendan Kehoe  (brendan@lisa.cygnus.com)
+
+	* breakpoint.c (catch_command_1): Fix typo in error msg.
+
+Tue May 25 16:05:55 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
+
+	* elfread.c (elf_symfile_read): Update ELF structure and routine
+	names to specify 32-bit versions.
+	(elf_symtab_read): Retrieve size field directly from symbol,
+	instead of using old kludge.
+
+	* mips-pinsn.c (print_insn): Cast address to bfd_vma before
+	calling opcodes library.
+	* z8k-tdep.c (print_insn): Likewise.
+
+Tue May 25 13:06:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c: Remove all uses of error().  Make error_type and
+	read_type_number static.
+	(define_symbol): Don't try to deal with a missing symbol
+	descriptor which isn't followed by digit, '(', or '-'.
+	* stabsread.h: Don't declare read_type_number here.
+	* gdbtypes.h: Don't declare error_type here.
+	* xcoffread.c: Remove NO_TYPEDEFS code.
+
+Tue May 25 09:33:16 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mips-tdep.c: Removed #include of many header files, and #define
+	of MIPSMAGIC; no longer used.
+
+Tue May 25 09:36:13 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Many places: replace "the inferior" in messages with "the program"
+	or "the program being debugged".
+	* inflow.c (try_writing_regs): Remove; it's been #if 0'd forever
+	and I'm getting sick of maintaining it.
+
+	* config/i386/linux.mh: Don't use \ newline; the awk scripts don't
+	support it.
+
+	* config/i386/go32.mh: Define SER_HARDWIRE.
+	* Makefile.in: Define SER_HARDWIRE.
+	(DEPFILES): Use it.
+	(alldeps.mak): Add SER_HARDWIRE.
+	Remove all references to ser-hardwire.{c,o}.
+	* configure.in: Remove all ser_hardwire and gdb_serial_driver stuff.
+
+Mon May 24 23:50:05 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-nat.c (store_inferior_registers):  Fill in all members of
+	inferior_fp_registers by reading them from the inferior before
+	modifying and writing them back.
+	Fixes unexplainable inferior FP exceptions after calls to the inferior
+	or setting of floating point registers.
+	* mips-tdep.c (mips_skip_prologue):  Skip move of argument register
+	to register which is generated by gcc-2.4.
+
+Tue May 25 00:42:39 1993  Ken Raeburn  (raeburn@cygnus.com)
+
+	* hppa-pinsn.c: Define OLD_TABLE before including opcode/hppa.h.
+
+Mon May 24 13:55:14 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* config/i386/{i386lynx.mh i386lynx.mt nm-i386lynx.h tm-i386lynx.h
+	xm-i386lynx.h}:  New configuration for Lynx.
+
+Mon May 24 10:01:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mipsread.c (parse_symbol): Deal with scVar and scVarRegister.
+	* symtab.h: Comment that LOC_REGPARM_ADDR can be call by reference.
+
+	* c-typeprint.c (c_type_print_base): Don't print typedef'd names
+	as struct, union, or enum tags.
+
+Mon May 24 01:10:01 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symmisc.c (dump_msymbols): Avoid gdb coredump with stripped
+	executable.
+
+Sat May 22 10:03:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior),
+	infcmd.c (program_info, signal_command):  Use symbolic signal names.
+
+	* inftarg.c (child_wait): Deal with EINTR and include message from
+	strerror if printing an error message.
+
+	* main.c (command_line_input): Use STOP_SIGNAL not SIGTSTP.
+
+	* stabsread.c: Remove most uses of lookup_fundamental_type.
+	(define_symbol): Use read_type for type of enum constant,
+	not just read_type_number.  Also don't call error().
+	(define_symbol): For unrecognized constant type, one complaint (the
+	one from error_type) is	enough.  Don't make our own in addition.
+	(define_symbol): Don't treat an N_FUN 'R' as a prototype.
+	* gdbtypes.h: Doc fixes.
+
+Sat May 22 03:33:07 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Fix stack unwinding through _sigtramp on Irix. These patches are from
+	Paul Flinders <ptf@delcam.co.uk>.
+	* mipsread.c (fixup_sigtramp): Find _sigtramp on Irix even when the
+	executable uses sigvec.
+	* mips-tdep.c (read_next_frame_reg): Allow tm-file to override
+	sigcontext offsets.
+	* config/mips/tm-irix3.h: Add sigcontext offsets for Irix.
+
+Sat May 22 00:39:01 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior): Clear stop_signal if it should not
+	be passed to the inferior to make "handle <signal> nopass nostop" work.
+
+Sat May 22 00:21:41 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-irix3.h: Clean up, use tm-bigmips.h and redefine
+	the necessary bits.
+	* findvar.c (value_from_register): Fix uninitialized first_addr
+	which caused problems with assignment of doubles to register variables
+	on some targets.
+	* mipsread.c: Remove TM_FILE_OVERRIDE, include tm.h and provide the
+	missing mips definitions if necessary.
+
+	Fix handling of double register variables for mips targets and big
+	endian hosts. These patches are from Paul Flinders <ptf@delcam.co.uk>.
+	* config/mips/tm-mips.h: Increase MAX_REGISTER_{RAW,VIRTUAL}_SIZE to
+	  8 bytes for doubles.
+	* config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE): New macro for
+	  conversion of type held in multiple registers to host format.
+	* config/mips/tm-mips.h (REGISTER_CONVERT_FROM_TYPE): New macro,
+	  companion to REGISTER_CONVERT_TO_TYPE.
+	* config/mips/tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE):
+	  Convert to function calls.
+	* config/mips/tm-mips.h (FIX_CALL_DUMMY): New code for big endian
+	  mips targets.
+	* mips-tdep.c (mips_print_register): Raw buffer now needs just
+	  MAX_REGISTER_RAW_SIZE bytes.
+	* mips-tdep.c (mips_print_register): Use REGISTER_CONVERT_TO_TYPE
+	  (if defined) for doubles.
+	* mips-tdep.c: (mips_extract_return_value, mips_store_return_value):
+	  New functions, take care of REGISTER_CONVERT_TO/FROM_TYPE.
+	* valops.c (value_assign): Use REGISTER_CONVERT_TO_TYPE if
+	  defined.
+	* findvar.c (value_from_register): Use REGISTER_CONVERT_TO_TYPE if
+	  defined.
+
+Fri May 21 09:04:25 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Add i[34]86-*-isc*.
+
+	* stabsread.c: Make sure all complain() pass the address of the struct.
+
+	* xcoffread.c: Make sure all struct complaints are static not auto.
+
+	* Makefile.in: Add rule for xcoffexec.o like that for paread.o.
+
+	* xcoffread.c (process_xcoff_symbol, case C_LSYM): Use define_symbol.
+
+Wed May 19 12:33:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/linux.mh: Re-enable coredumps now that they should work.
+
+Wed May 19 15:44:20 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* config/m68k/tm-m68k.h (FRAME_CHAIN): add missing close paren.
+
+Wed May 19 15:33:57 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* config/pa/nm-hppab.h:  Comment PTRACE_ARG3_TYPE.
+
+Wed May 19 12:33:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (INSTALLED_LIBS): New variable.
+
+Tue May 18 14:08:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (quit_command): In the "quit anyway?" message, tell the user
+	whether we are planning to detach or kill the program.
+
+	* config/vax/vaxbsd.mh: Add "NAT_FILE= nm-vax.h".
+	* config/vax/xm-vaxbsd.h: Use <sys/param.h> not <machine/limits.h>
+
+	* infcmd.c (read_pc): Doc fix.
+
+	* printcmd.c (print_address_symbolic): Use %u not %d for offset.
+
+	* blockframe.c (get_prev_frame_info): If pc in sigtramp, set
+	signal_handler_caller.
+	* tm-68k.h (FRAME_{CHAIN,SAVED_PC}): Deal with sigtramp.
+	* tm-hp300bsd.h: Define SIGTRAMP_{START,END} not IN_SIGTRAMP.
+	* inferior.h (IN_SIGTRAMP): Definition moved from infrun.c.
+	Use SIGTRAMP_START if defined.
+	* infcmd.c (step_1): Use SIGTRAMP_{START,END} if needed.
+	* infrun.c (wait_for_inferior): Check IN_SIGTRAMP before SKIP_PROLOGUE.
+
+	* infptrace.c: Remove unused KERNEL_U_ADDR_HPUX code.
+
+	* infcmd.c (step_1): Fix poorly worded error message.
+
+	* config/{i386/linux.mh,m68k/isi.mh} (NATDEPFILES):
+	Comment out corelow.c because core dumps are broken on these machines.
+
+	* Makefile.in (depend):  Put "${srcdir}" in generated dependencies
+	if srcdir is not ".".
+	Also put in -I${BFD_DIR} or -I${READLINE_DIR} for files which need it.
+	(INCLUDE_CFLAGS):  Remove BFD_DIR and READLINE_DIR.
+	* depend:  Update to latest automatically built version.
+
+Tue May 18 08:10:45 1993  Fred Fish  (fnf@cygnus.com)
+
+	* ChangeLog, ChangeLog-92:  Split ChangeLog at 1993.
+	* Makefile.in (NONSRC):  Add ChangeLog-92
+
+Tue May 18 08:03:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* findvar.c ({read,write}_register): Use REGISTER_RAW_SIZE
+	not typo RAW_REGISTER_SIZE.
+
+	* frame.h, inferior.h: Doc fixes.
+
+Mon May 17 15:43:03 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (write_register):  Add sanity check for register size.
+	(read_register):  Fixup sanity check for register size to be
+	consistent with write_register().
+
+Mon May 17 07:36:20 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* sparclite/Makefile.in: Add dummy info, install and install-info
+	targets.
+
+Thu May 13 07:30:22 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-nindy.c: Removed declaration of coffstrip.
+	* nindy-share/nindy.c: #if 0 coffstrip routine; no longer used.
+
+Wed May 12 00:35:19 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.9.1 after release and cvs
+	tagging.
+
+	* Makefile.in (VERSION):  GDB 4.9 release.
+
+Tue May 11 08:04:41 1993  Fred Fish  (fnf@cygnus.com)
+
+	* README:  Update known bugs to include the Solaris bug that
+	leaves core dumps in the current directory when restarting the
+	inferior with "run".  Expand on the testsuite information.
+
+	* Makefile.in (VERSION):  Bump to 4.8.96 for what should hopefully
+	be the last 4.9 prerelease test archive.
+
+Mon May 10 22:13:23 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/m68k/xm-hp300bsd.h: Include <sys/param.h> to avoid INT_MAX
+	redefined warnings.
+
+Mon May 10 20:00:43 1993  Fred Fish  (fnf@cygnus.com)
+
+	* README, NEWS:  Update for gdb 4.9 release.
+
+Mon May 10 19:38:34 1993  John Gilmore  (gnu@cygnus.com)
+
+	* ch-exp.y (MAX, MIN):  Rename to MAX_TOKEN, MIN_TOKEN.
+	* target.c (MIN):  #undef before defining.
+
+Mon May 10 16:03:03 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+        Patch from Jeffrey Law:
+        * gdb/config/pa/nm-hppab.h (PTRACE_ARG3_TYPE): Define as caddr_t.
+
+Mon May 10 15:28:27 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* hppa-tdep.c (hppa_push_arguments): Allocate correct amount of
+	memory.
+
+Mon May 10 13:14:46 1993  Fred Fish  (fnf@cygnus.com)
+
+	* ch-exp.y (start):  Apply work-around to avoid bison warning.
+
+Sun May  9 07:25:02 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (BISON):  Remove double quotes around BISON
+	definition when bison is used.
+
+	* configure.in (hppa*-hp-bsd):  Change to hppa*-hp-bsd*
+	* configure.in (hppa*-hp-hpux):  Change to hppa*-hp-hpux*
+	* configure.in (m68*-hp-bsd):  Change to m68*-hp-bsd*
+	* configure.in (m68*-hp-hpux):  Change to m68*-hp-hpux*
+	* configure.in (hppa*-*-bsd):  Change to hppa*-*-bsd*
+	* configure.in (hppa*-*-hpux):  Change to hppa*-*-hpux*
+	* configure.in (m68*-hp-bsd):  Change to m68*-hp-bsd*
+	* configure.in (m68*-hp-hpux):  Change to m68*-hp-hpux*
+
+	* Makefile.in (VERSION):  Bump to 4.8.6.
+
+Sat May  8 12:36:03 1993  Fred Fish  (fnf@cygnus.com)
+
+	* config/pa/xm-hppah.h (MALLOC_INCOMPATIBLE):  Define it, and
+	include declarations for malloc/realloc/free.  Both malloc and
+	realloc return 'void *' for non-ANSI compilations.
+
+Sat May  8 01:39:30 1993  (pes@regent.e-technik.tu-muenchen.de)
+
+	* coffread.c (read_coff_symtab): Don't fclose stream as it is no
+	longer opened twice.
+
+Thu May  6 21:08:55 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* solib.c (clear_solib): Don't close bfd if it is NULL.
+
+Thu May  6 20:55:35 1993  Fred Fish  (fnf@cygnus.com)
+
+	* core.c (dis_asm_read_memory):  Cast second arg of
+	target_read_memory to "char *".
+	* breakpoint.c (watchpoint_check):  Change arg type from PTR to
+	"char *", to match other functions called by catch_errors().
+
+Thu May  6 15:47:45 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* More patches from Jeffrey Law (law@cs.utah.edu).
+	* gdb/config/nm-hppab.h (PTRACE_ARG3_TYPE): Define as caddr_t.
+	* gdb/config/pa/tm-hppah.h (millicode_start, millicode_end):
+	Delete unnecessary declarations.
+
+Thu May  6 15:15:46 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* ser-unix.c (wait_for):  Use VTIME to do timeouts instead of
+	poll() for termio{s}.
+
+Thu May  6 10:03:41 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* i386-tdep.c (i386_frame_num_args): Always return -1.
+
+Wed May  5 15:16:33 1993  Stu Grossman  (grossman@cygnus.com)
+
+        * Patches from Jeffrey Law <law@cs.utah.edu>.
+	* gdb/hppa-tdep.c: Declare frame_saved_pc.
+	(frameless_function_invocation): New function.
+	(frame_saved_pc, init_extra_frame_info): Use 
+	frameless_function_invocation.
+	* gdb/config/pa/tm-hppa.h (SAVED_PC_AFTER_CALL): Use saved_pc_after
+	call instead of just grabbing the value currently in %r2.
+	(FRAMELESS_FUNCTION_INVOCATION): Use frameless_function_invocation.
+	* gdb/config/pa/tm-hppah.h (SAVED_PC_AFTER_CALL): Delete private
+	definition and use the common one in tm-hppa.h.
+	* gdb/hppa-tdep.c (frame_chain_valid): If "use_unwind" is true, then
+	use unwind descriptors to determine if the frame chain is valid.
+	* gdb/hppa-tdep.c (find_dummy_frame_regs):  Rework so that
+	it does not assume %r4 is the frame pointer.
+	* gdb/hppa-pinsn.c (print_insn): Handle 'r' and 'R' for break, rsm,
+	and ssm instructions.
+	* gdb/hppa-tdep.c (extract_5r_store, extract_5R_store): New
+	helper functions for print_insn.
+	* gdb/hppa-tdep.c (gcc_p, hpux_cc_p): Delete unused functions.
+	* gdb/config/pa/tm-hppa.h (ABOUT_TO_RETURN): Handle a return
+	which nullifies the following instruction.
+
+Tue May  4 12:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* infptrace.c [FIVE_ARG_PTRACE]: Define ptrace to call_ptrace and
+	pass the 5th arg there, rather than using an ANSI C-specific macro.
+
+	* Makefile.in (depend): Don't include ${CC} command for *.tab.c.
+
+Tue May  4 19:33:12 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.8.5
+	* Makefile.in (INCLUDE_CFLAGS):  Add BFD_DIR and READLINE_DIR
+	directories to include search path.
+	* Makefile.in (CLIBS, CDEPS, ADD_FILES, ADD_DEPS):  Clean up
+	whitespace.
+	* Makefile.in (depend):  For gcc -MM line, use INTERNAL_CFLAGS
+	* Makefile.in (main.o, dbxread.o, coffread.o, mipsread.o,
+	elfread.o, dwarfread.o, stabsread.o, xcoffread.o, xcoffexec.o,
+	xdr_ld.o, xdr_rdb.o, nindy.o, Onindy.o, ttybreak.o, ttyflush.o,
+	udr.o, udip2soc.o):  Remove explicit rules, use the ones that
+	are automatically generated in "depend".
+	* Makefile.in (paread.o):  Document why a dependency doesn't get
+	automatically generated in "depend" and leave this explicit rule
+	in for now (FIXME).
+	* depend:  Update to latest automatically generated version.
+
+Tue May  4 12:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c: Doc fix.
+
+	* Makefile.in (depend): Include $(CC) command in generated output.
+
+Mon May  3 22:51:05 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (NONSRC):  Remove ${srcdir}/putenv.c.
+	* Makefile.in (SFILES):  Add ${srcdir}/putenv.c.
+	* depend:  Update to latest automatically built version.
+
+Mon May  3 19:20:20 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* sparclite/Makefile.in:  Create default target that does nothing
+	in order to force user to build by hand.
+
+	* sparclite/Makefile:  Remove.  It's not necessary anymore.
+
+	* ser-unix.c (wait_for):  New routine to handle read timeouts,
+	etc.  Uses poll() if HAVE_TERMIO[S] is defined, select() otherwise.
+
+Mon May  3 13:52:08 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mips-pinsn.c (print_insn): Return value.
+
+Sun May  2 11:43:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (SFILES):  Remove ser-hardwire.c; it is a link made
+	at configuration time and doesn't belong in the distribution archive.
+
+	* Makefile.in (NONSRC):  Add 29k-share/README.
+	* Makefile.in (HFILES):  Add 29k-share/udi/udiids.h.
+
+	* defs.h (UINT_MAX, LONG_MAX, INT_MAX, INT_MIN):  Replace hex
+	constants with slightly more portable definitions (still depends
+	on 2's complement arithmetic though).
+	* config/i386/nm-linux.h:  Define NO_SYS_REG_H for no <sys/reg.h>.
+	* i386v-nat.c (sys/reg.h):  Conditionalize include on
+	NO_SYS_REG_H.  Linux doesn't have <sys/reg.h>.
+	* ser-unix.c (termio.h):  Include <termio.h> like other files that
+	include termio.h, not <sys/termio.h> which may not exist (on
+	linux for example).
+
+Sat May  1 16:05:24 1993  Fred Fish  (fnf@cygnus.com)
+
+	* valprint.c (print_longest):  Change format parameter from a
+	'char' to an 'int'.  We can't have 'char' parameters with the
+	current coding style, where we mix prototypes with pre-ANSI
+	style declarations.
+	* value.h (print_longest):  Change format parameter in prototype
+	from a 'char' to an 'int'.	
+
+Sat May  1 02:47:20 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-mips.h (STAB_REG_TO_REGNUM): Match it with the gcc
+	definition.
+	* config/mips/tm-irix3.h (STAB_REG_TO_REGNUM): Add.
+	* irix4-nat.c (fill_fpregset): Fix bug with indexing into fpregsetp.
+
+Fri Apr 30 17:45:32 1993  Stu Grossman  (grossman@cygnus.com)
+
+        * The following patches are from Jeffrey Law <law@cs.utah.edu>.
+	* config/pa/hppabsd.mh:  Add more files to NATDEPFILES.
+	* config/pa/xm-hppa[bh].h: Define FIVE_ARG_PTRACE.
+	* hppab-nat.c: Delete WANT_NATIVE_TARGET ifdefs.
+	ptrace needs 5 arguments, #define ptrace to always
+	pass zero as the 5th argument.
+
+Fri Apr 30 15:54:13 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* configure.in: Match z8k-*-sim for z8000.
+	* config/h8500/tm-h8500.h, h8500-tdep.c: Lint.
+	* remote-hms.c: Update to use new serial protocol.
+
+Fri Apr 30 16:50:38 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* mips-tdep.c: remove include of sys/dir.h.  Doesn't seem
+	  necessary and Solaris doesn't have it.
+
+	* Makefile.in (clean-info, install, install-info, info, dvi,
+	  check, all): do not echo recursion lines.
+
+	* 29k-share/udip2soc.c (UDIConnect): replace union wait with int.
+
+	* config/sparc/sun4sol2.mh (XM_CLIBS): add -lsocket which is
+	  required target ports which use sockets (like a29k-udi).
+
+	* remote-udi.c (udi_wait): Use SIGURG, as Solaris doesn't have SIGLOST.
+
+Fri Apr 30 11:05:42 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* ser-unix.c [USE_{TERMIO,ALARM}_TIMEOUT]: New code to deal with
+	systems lacking select().
+
+	* Makefile.in (TAGS): Doc fix.  Deal with empty DEPFILES.
+
+Fri Apr 30 10:06:46 1993  Fred Fish  (fnf@cygnus.com)
+
+	* alldeps.mak, depend:  Update with latest automatically built
+	versions.
+
+Thu Apr 29 12:03:23 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (SFILES):  Add ser-unix.c and ser-go32.c.
+
+	* Makefile.in (make-proto-testsuite.dir):  New target to make
+	prototype testsuite tree.
+
+	* Makefile.in (VERSION):  Bump to 4.8.4.
+
+Thu Apr 29 08:46:22 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabsread.c (define_symbol): If unrecognized constant type,
+	complain() not error().
+
+Thu Apr 29 00:03:59 1993  Fred Fish  (fnf@cygnus.com)
+
+	* infptrace.c:  Add missing close paren to test for
+	FIVE_ARG_PTRACE defined.
+
+	* defs.h (CC_HAS_LONG_LONG):  Set up to define CC_HAS_LONG_LONG
+	when compiling with gcc, but disable it for now.  See comment.
+	* defs.h (LONGEST):  Define as either "long" or "long long"
+	based on CC_HAS_LONG_LONG.
+	* defs.h (longest_to_int):  Use CC_HAS_LONG_LONG to control
+	how longest_to_int is defined.
+	* c-valprint.c (c_val_print):  Call print_longest.
+	* expprint.c (dump_expression):  Use PRINTF_HAS_LONG_LONG
+	instead of LONG_LONG.
+	* {printcmd.c, gdbtypes.h} (LONG_LONG):  Replace usages with
+	CC_HAS_LONG_LONG.
+	* printcmd.c (print_scalar_formatted):  Call print_longest
+	and let it figure out what to do for PRINTF_HAS_LONG_LONG.
+	* typeprint.c (print_type_scalar):  Call print_longest and let
+	it figure out what to do for PRINTF_HAS_LONG_LONG.
+	* valprint.c (val_print_type_code_int):  Call print_longest
+	and let it figure out what to do for PRINTF_HAS_LONG_LONG.
+	* stabsread.c (LONG_LONG):  Replace usages with CC_HAS_LONG_LONG.
+	* value.h (struct value):  Replace usage of LONG_LONG with
+	CC_HAS_LONG_LONG.
+	* value.h (print_longest):  Add prototype.
+	* values.c (LONG_LONG):  Replace usages with CC_HAS_LONG_LONG.
+	* values.c (unpack_double):  Collapse code that was unnecessarily
+	dependent on CC_HAS_LONG_LONG.  Use LONGEST instead of direct types.
+	* values.c (value_from_longest):  Remove dependency on
+	CC_HAS_LONG_LONG and just use LONGEST.
+	* solib.c (solib_map_sections):  Use bfd_get_filename
+	to access filename field.
+	* solib.c (clear_solib):  Save filename and free it later, after
+	bfd_close, since bfd_close may reference it.  Use bfd_get_filename
+	to access the field.
+	* config/convex/xm-convex.h (LONG_LONG):  Replace with
+	CC_HAS_LONG_LONG.  Add define for PRINTF_HAS_LONG_LONG.
+	* doc/gdbint.texinfo (LONG_LONG):  Replace with CC_HAS_LONG_LONG.
+	Add PRINTF_HAS_LONG_LONG references.
+
+Wed Apr 28 06:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* inflow.c (kill_command), infcmd.c (attach_command),
+	remote.c (remote_interrupt_twice): In messages for the user, call it
+	"the program" or "the program being debugged" not "the inferior".
+
+	* hp300ux-nat.c: Cast second arg to supply_register calls.
+	(_initialize_kernel_u_addr, getpagesize): New functions.
+	(store_inferior_register_1): Change arg name from value to val.
+	(fetch_core_registers): Make arg core_reg_size unsigned.
+	Pass 5 args to ptrace.
+	* config/m68k/xm-hp300hpux.h: Define FIVE_ARG_PTRACE.
+	Remove KERNEL_U_ADDR stuff.
+	* infptrace.c [FIVE_ARG_PTRACE]: Pass 5th arg to ptrace.
+	* config/m68k/hp300hpux.m{t,h}:
+	Move exec.o from NATDEPFILES to TDEPFILES
+	* config/m68k/hp300hpux.mt: Mention GAS requirement.  Remove
+	hp-include stuff.  Add m68k-tdep.o to TDEPFILES.
+
+Wed Apr 28 13:27:54 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* ch-exp.y (yylex): Don't STREQ with simplename if it is NULL.
+
+Wed Apr 28 06:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/sparc/xm-sun4os4.h [__STDC__]: Don't use MALLOC_INCOMPATIBLE.
+
+Wed Apr 28 11:39:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* doc/gdb.texinfo: make node "Shell Commands" unconditional;
+	describe `set demangle-style arm' (not cfront); 
+	mention can type `q' to discard output, when gdb pages
+
+Wed Apr 28 11:32:39 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valops.c (search_struct_field): Fix gdb core dump with incomplete
+	stabs info.
+
+Wed Apr 28 06:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* remote.c: Change timeout to 2.
+	(remote_open): Use unpush_target not remote_close.
+	(remote_resume): If siggnal != 0, give warning not error().
+	(remote_wait, remote_interrupt, remote_interrupt_twice):
+	If we get two interrupts, let the user get out if they want.
+	(remote_{kill,mourn}): New functions.
+	i386-stub.c (handle_exception, case 'k'): Don't BREAKPOINT.
+
+Wed Apr 28 09:20:55 1993  Ian Lance Taylor  (ian@rtl.cygnus.com)
+
+	* config/sparc/sun4sol2.mh (XM_CLIBS): Define to be -lnsl.
+
+Wed Apr 28 06:11:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Remote targets (mourn): Call unpush_target.
+
+	* config/sparc/xm-sun4os4.h: Declare free() to return int.
+	Remove twisted use of PARAMS.
+
+	* config/rs6000/xm-rs6000.h: Don't define MALLOC_INCOMPATIBLE now
+	that ansidecl.h assumes ANSI on AIX.
+
+Tue Apr 27 10:01:33 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* README: Move most stuff about hacking GDB to doc/gdbint.texinfo.
+	(Known bugs): Remove AIX bugs, revise SPARC struct bug description.
+
+Tue Apr 27 13:44:19 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* expprint.c (print_subexp): Fix bug with OP_SCOPE operator output.
+
+Tue Apr 27 10:01:33 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* remote-vx.c (net_connect): Allow numeric IP address for host.
+
+Mon Apr 26 17:59:38 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* config/sh/sh.mt, config/sh/tm-sh.h, sh-tdep.c: New files.
+
+Mon Apr 26 07:13:32 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* rs6000-tdep.c (branch_dest): Deal with stepping through system call.
+
+	* symtab.h, xcoffread.c: Revise linetable sorting comments.
+
+Sun Apr 25 02:32:16 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valops.c (value_cast): A cast might also change the object
+	representation in C++.
+	* dbxread.c (end_psymtab): Copy subpst read_symtab function from pst
+	to get the proper read_symtab function when called from mipsread.c.
+	* mipsread.c (mipscoff_psymtab_to_symtab, psymtab_to_symtab_1):
+	Set cur_bfd in psymtab_to_symtab_1 as CURBFD(pst) is invalid
+	for dummy psymtabs, inhibit processing of dummy psymtabs.
+
+Sat Apr 24 19:59:54 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Changes from (or inspired by) AMD:
+	* remote-udi.c (udi_attach): Assignments to Space and Offset were
+	switched, fix it.
+	(udi_wait): Make error message (UDIGetStdout) match error.
+	(udi_wait): Handle UDIStdinNeeded.
+	* command.c [CANT_FORK]: Use system().
+	* utils.c (prompt_for_continue): Allow quit with 'q'.
+
+	* solib.c (solib_add): Don't call special_symbol_handling if there
+	were errors in symbol_add_stub.  Also set so->from_tty before
+	calling symbol_add_stub.
+
+Fri Apr 23 16:17:00 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Merge in HPPA/BSD patches from Utah:
+	* defs.h:  Add const to 2nd arg of psignal prototype.
+	* hppah-tdep.c:  Renamed to hppa-tdep.c 'cuz it's common code with
+	BSD now.
+	* hppab-core.c:  Deleted.  No longer useful.
+	* hppab-nat.c:  #include more files.  Use PT_WUREGS, not
+	PT_WRITE_U.
+	* hppab-tdep.c:  Deleted.  Supplanted by hppa-tdep.c.
+	* config/pa/hppabsd.mh (NATDEPFILES):  Remove hppab-core.o.
+	* config/pa/hppabsd.mt (TDEPFILES):  hppab-tdep.o => hppa-tdep.o
+	* config/pa/hppahpux.mt (TDEPFILES):  hppab-tdep.o => hppa-tdep.o
+	* config/pa/xm-hppab.h:  #define SET_STACK_LIMIT_HUGE.
+
+Fri Apr 23 10:34:02 1993  Stu Grossman  (grossman@cygnus.com)
+
+        * Fix two bugs found by deja-gnu.  One is the incorrect reporting
+	of the PC being in a stack dummy when looking at a core file
+	without symbols.  The other is the incorrect passing of char
+	arguments during expression evaluation (ie: p foo('a','b') would
+	mess up the passing of it's args because it wasn't coercing the
+	char's to ints).
+	* hppah-tdep.c:  Rename global functions to have consistent hppa_
+	prefix.  Make more functions static.  Drop hp_ prefix from static
+	functions.  (hppa_push_arguments):  Call value_arg_coerce to cast
+	char to int args if necessary.  (hppa_fix_call_dummy):  Create
+	this routine from FIX_CALL_DUMMY macro in tm-hppa.h.
+	* inferior.h (PC_IN_CALL_DUMMY):  Check for frame_address being
+	valid (ie: != 0) before doing comparison against PC.
+	* valops.c (call_function_by_hand):  Adjust call to FIX_CALL_DUMMY
+	to reflect new arguments.
+	* config/pa/tm-hppa.h (POP_FRAME, PUSH_ARGUMENTS):  Use new hppa_
+	prefix for func	name.  (FIX_CALL_DUMMY):  Move code into
+	hppah-tdep.c.
+
+	* testsuite/gdb.t16/gdbme.c, testsuite/gdb.t17/gdbme.c:  Add calls
+	to malloc() so that we can test GDB eval of dynamically created
+	arrays (like char strings in `print "foo"').
+
+Fri Apr 23 01:28:14 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* printcmd.c (print_address_symbolic): Search symtabs as well as the
+	minimal symbols for a nearby symbol.
+
+Thu Apr 22 19:44:21 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* coffread.c:  Comment changes around minimal symbol recording.
+
+Thu Apr 22 16:24:36 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* command.c: comment changes only.
+
+	* mips-tdep.c (heuristic_fence_post): new static variable.
+	  (heuristic_proc_start): use heuristic_fence_post, print better
+	  warnings, but only if not stop_soon_quietly.
+	  (_initialize_mips_tdep): add_set_cmd for heuristic-fence-post. 
+
+Thu Apr 22 14:50:05 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* symtab.h: Fix LOC_REF_ARG comment.
+
+Wed Apr 22 20:21:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  and Jim Kingdon (kingdon@cygnus.com)
+
+	* stabsread.c (define_symbol): Combine a 'p', 'r' arg pair to a
+	LOC_REGPARM symbol.
+	* config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Revise comments.
+	symfile.c (compare_symbols): Don't check first character; STRCMP
+	does that.
+
+	* stabsread.c (define_symbol): Generate a LOC_REGPARM_ADDR for
+	structures that are passed by address in a register.
+	* symtab.h (enum address_class): Add LOC_REGPARM_ADDR.
+	* findvar.c (read_var_value),
+	printcmd.c (address_info, print_frame_args),
+	stack.c (print_frame_arg_vars), symmisc.c (print_{,partial_}symbol),
+	* symtab.c (lookup_block_symbol): Deal with it.
+
+Thu Apr 22 09:07:24 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* objfiles.h (obj_section), objfiles.c (build_objfile_section_table):
+	Add objfile field.
+	* objfiles.c (find_pc_section): Return a struct obj_section *.
+	* sparc-tdep.c (in_solib_trampoline): Deal with find_pc_section return.
+	* symfile.c (syms_from_objfile) [IBM6000_TARGET]:
+	Don't use obj_section hack.
+	* xcoffexec (vmap_symtab): Relocate obj_sections.
+	* printcmd.c (containing_function_bounds): Use find_pc_section.
+
+	* symtab.h: Clean up SYMBOL_VALUE comments.
+
+Wed Apr 21 14:29:57 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stack.c (print_frame_arg_vars), printcmd.c (print_frame_args):
+	Expand comments about LOC_ARG/LOC_LOCAL pairs.
+
+	* coffread.c (read_coff_symtab): Use rewind before fseek.
+
+Wed Apr 21 14:24:19 1993  Per Bothner  (bothner@cygnus.com)
+
+	* ch-exp.y:  Removed unused structure_primitive_value and FIXME_23.
+	* Makefile.in:  Add $(YFLAGS) when using $(YACC).
+	* Makefile.in:  Remove message to expect conflicts and unused
+	rules in ch-exp.y, since there no longer are any such.
+
+Wed Apr 21 13:27:50 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* stabs.texinfo: fixed bad xrefs (un-initialized statics)
+
+Tue Apr 20 08:55:11 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffexec.c (xcoff_relocate_core): If no exec file, error()
+	rather than dumping core.
+
+	* Makefile.in: Add ${srcdir}/ to all source files.
+	(alldeps.mak): Add "${srcdir}/" to files when generating alldeps.mak.
+	(TAGS): Deal with srcdir and new config directory scheme.
+	createtags: Remove.
+	Makefile.in (NONSRC): Remove createtags.
+	alldeps.mak: Updated.
+
+	* rs6000-tdep.c: Delete unused function print_frame.
+
+	* frame.h (struct frame_info): Doc fix for next_frame.
+	New field signal_handler_caller.
+	blockframe.c (create_new_frame, get_prev_frame_info),
+	config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO): Set it (needs
+	INIT_FRAME_PC_FIRST).
+	stack.c (print_frame_info), rs6000-tdep.c (rs6000_frame_chain):
+	Check it.
+
+Mon Apr 19 22:52:33 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* irix4-nat.c (fetch_core_registers):  Special version of this for
+	Irix 4.x, which stores regs a bit differently from other /proc
+	based systems.
+	* procfs.c, core-svr4.c:  Move fetch_core_registers from procfs.c
+	to new file core-svr4.c.
+	* config/i386/i386sol2.mh, config/i386/i386v4.mh, config/m68k/amix.mh,
+	config/i386/ncr3000.mh, config/sparc/sun4sol2.mh:  Add core-svr4.o
+	to NATDEPFILES.
+	* config/mips/irix4.mh:  Add corelow.o to NATDEPFILES.
+
+Mon Apr 19 11:13:34 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* i387-tdep.c: Remove unused #includes.
+
+	* configure.in: Match i[34]86-*-sysv3.2 not i[34]86-*-sysv32.
+
+	* config/i386/nm-i386v.h: Define NO_PTRACE_H.
+
+Sun Apr 18 10:39:35 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c: Nuke NO_DEFINE_SYMBOL code.  There is no going back.
+
+	* stabsread.c (define_symbol): 'R' is synonym for 'P', not 'r'.
+	xcoffread.c (process_xcoff_symbol, case C_RPSYM):
+	Don't muck with SYMBOL_CLASS.
+
+Fri Apr 16 17:38:33 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* munch:  Don't use head command.  It doesn't exist everywhere.
+
+Fri Apr 16 15:07:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* inflow.c (new_tty):  Remove spurious 'o' character at end
+	of #endif line.
+
+Fri Apr 16 12:27:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (mips_skip_prologue): Always skip the typical prologue
+	instructions and nothing more.
+	* mipsread.c (add_line): Add comment why we have to combine line number
+	entries for the same line number.
+
+Fri Apr 16 09:42:03 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* symtab.{c,h}: Doc fixes (remove symseg references, last relevant
+	in gdb 2.8!).
+
+Thu Apr 15 21:16:58 1993  Fred Fish  (fnf@cygnus.com)
+
+	* depend, alldeps.mak:  Update, now that gcc -MM bug is fixed.
+
+Thu Apr 15 12:38:39 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* source.c (select_source_symtab): Clean up comment.  Also, if
+	we have a current_source_symtab, and s is NULL, return without
+	doing anything.
+	xcoffread.c (xcoff_symfile_read): Don't call select_source_symtab.
+	breakpoint.c (breakpoint_re_set): Don't call select_source_symtab.
+
+Thu Apr 15 02:37:48 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* dbxread.c (unknown_symchar_complaint):  Add new complaint.
+	* stabsread.h:  Declare it.
+	* partial-stab.h:  Use it.
+
+	* utils.c (malloc_botch):  Don't forward-declare if NO_MMALLOC.
+
+Wed Apr 14 17:12:51 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stack.c (print_frame_info): Print specially if dummy frame.
+
+	* breakpoint.c: Add comments regarding within_scope future direction.
+
+	* Version 4.8.3.
+
+	* xcoffread.c (record_include_{begin,end}): Change fatal to complain.
+
+Wed Apr 14 14:03:18 1993  Per Bothner  (bothner@cygnus.com)
+
+	* ch-exp.y:  Fix thinko that broke parsing of FALSE.
+
+Wed Apr 14 12:49:29 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* stabsread.c (read_member_functions): Initialize domain for stubbed
+	member functions to avoid gdb core dumps when printing pointers
+	to member functions.
+	* cp-valprint.c (cp_print_class_method): Check for stubbed member
+	functions.
+
+Tue Apr 13 08:28:26 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* expprint.c (print_subexp): If opcode not found in op_print_tab,
+	stop with an error().
+	eval.c (evaluate_subexp): Change error message.
+
+	* objfiles.c (build_objfile_section_table): Cast return value
+	from obstack_finish.
+
+Mon Apr 12 10:53:50 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/rs6000/tm-rs6000.h, rs6000-tdep.c: Move FRAME_CHAIN
+	to rs6000_frame_chain and deal with it if we're in a signal handler.
+	(FRAME_SAVED_PC): Use rs6000_frame_chain.
+
+	* breakpoint.c (within_scope): New function.
+	(enable_breakpoint, watchpoint_check): Use it.
+
+	* source.c (openp): Handle "exec-file ./ls" correctly.
+
+	* breakpoint.c (breakpoint_1): Use wrap_here before "at".
+
+Sat Apr 10 01:32:43 1993  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* ch-exp.y:  Clean up lexing of identifiers and
+	reserved words.  (E.g. don't recognize FALSEXXX as the
+	keyword FALSE followed by the identifier XXX.)
+	Also, convert identifiers to lower case.
+
+Fri Apr  9 15:53:19 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-mips.c, remote-monitor.c, remote-st2000.c:  Convert to
+	new serial interface.
+
+Fri Apr  9 15:01:12 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (remote_open):  Use SERIAL_OPEN instead of serial_open.
+	(putpkt, getpkt):  Use new return codes for SERIAL_READCHAR.
+	* ser-go32.c:  Return -1 on most failures, 0 on most successes,
+	and use new return codes for go32_readchar().
+	* ser-unix.c:  Ditto.  Also, move error handling up to caller for
+	SERIAL_SETBAUDRATE().
+	* serial.c (serial_open):  Internal call, not SERIAL_OPEN to get
+	to specific routine.
+	(serial_close):  New routine to wrap around device close routine.
+	serial.h:  Clean & document return values more clearly.
+
+Fri Apr  9 10:20:55 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* rs6000-pinsn.c (print_operand): Deal with no operand instructions.
+
+	* rs6000-pinsn.c (print_operand, case LI): Print condition register
+	operand in decimal rather than wrong textual versions.
+
+	* printcmd.c (_initialize_printcmd): Clean up docstring for "x"
+	(mention 't', remove false thing about 'g' only good with 'f').
+
+	* breakpoint.h: move "struct breakpoint" and friends to top of
+	file so that bpstat_find_breakpoint prototype works.
+
+	* solib.c (struct so_list): Add bfd field.
+	(solib_map_sections): Leave bfd open and scratch_pathname allocated.
+	Put the bfd in bfd field of the so_list.
+	(clear_solib): Free bfd name and close_bfd on the bfd.
+
+Fri Apr  9 00:45:41 1993  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* valarith.c (value_subscript):  Add COERCE_REF.
+	* ch-exp.y (operand_5):  We can generalize the 2nd operand
+	of a string repetition ot 'literal' without ambiguity.
+
+Thu Apr  8 10:15:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.h (struct bpstat): Remove momentary field.
+	Remove bpstat_momentary_breakpoint.  This was always kludgy
+	and is no longer used.
+
+	* breakpoint.h: Add enum bpstat_what.
+	breakpoint.h (struct bpstat), breakpoint.c (bpstat_stop_status):
+	stop and print fields of bpstat now per-breakpoint, not just
+	one for the whole chain.
+	breakpoint.{c,h} (bpstat_what): New function.
+	breakpoint.h: Remove bpstat_stop and bpstat_should_print.
+	infrun.c: Replace switch (stop_bpstat->breakpoint_at->type)
+	with call to bpstat_what.
+	README: Remove watchpoint/breakpoint bug from known bugs.
+
+	* breakpoint.h: Prototype bpstat_find_breakpoint.
+
+Thu Apr  8 16:01:21 1993  Fred Fish  (fnf@cygnus.com)
+
+	* symtab.c (find_methods, gdb_mangle_name):  Note that functions
+	are g++ specific.
+	* symtab.h (VTBL_FNADDR_OFFSET, OPNAME_PREFIX_P, VTBL_PREFIX_P,
+	DESTRUCTOR_PREFIX_P):  Note that macros are g++ specific.
+
+Thu Apr  8 12:45:32 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* i960-pinsn.c (tabent): Copied struct definition from
+	opcodes/i960-dis.c.
+
+Thu Apr  8 10:34:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.h (DESTRUCTOR_PREFIX_P): New macro to check if physname
+	is a C++ destructor.
+	* symtab.c (gdb_mangle_name): Use it.
+	* symtab.c (find_methods): Do not add destructors to choice list
+	for constructors.
+	* symtab.c (decode_line_1): Make breakpoints on destructors work
+	for gcc-2.x again.
+
+Wed Apr  7 18:43:09 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* ser-go32.c:  Make it use serial port name.
+	* go32-xdep.c:  Put in def for strlwr, needed by dir.o in go32 libc.
+
+	* infcmd.c (read_pc):  Make sure that we read PC_REGNUM when not
+	in a system call!
+
+Wed Apr  7 15:52:11 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Only configure sparclite subdir when target_cpu
+	is sparclite.
+
+Wed Apr  7 10:11:22 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (struct coff_symbol): Change c_sclass to unsigned char.
+	Remove FIXME comment regarding this.
+
+	* symfile.h: Change NULL->'\0' in comment (that wasn't a typo).
+
+	* xcoffread.c (read_xcoff_symtab): Use E_SYMNMLEN.
+
+Tue Apr  6 22:30:58 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	Add section table to objfile struct.  Use it for find_pc_section.
+	* objfiles.c (add_to_objfile_sections,
+	  build_objfile_section_table, find_pc_section): new functions.
+	  (allocate_objfile): build section table.
+	* objfiles.h (struct obj_section): new structure.
+	  (struct objfile): add section table.
+	  (find_pc_section): new prototype.
+	* solib.[ch] (find_pc_section_from_so_list): removed.
+	* sparc-tdep.c: include objfiles.h for find_pc_section.  include
+	  symfile.h for objfiles.h.
+	  (in_solib_trampoline): adjusted for new find_pc_section
+	  prototype.  Removed BAD_RICH_HACK ifdefs.
+	* symfile.c (syms_from_objfile): offset objfile sections.
+	  (find_pc_section): removed.  Also removed BAD_RICH_HACK ifdefs.
+	* symfile.h (find_pc_section): prototype removed.  Also fixed
+	  comment typo NUL -> NULL.
+	* target.[ch] (find_pc_section_from_targets): removed.
+	* config/sparc/tm-sun4sol2.h (BAD_RICHH_HACK): removed.
+
+Tue Apr  6 21:41:13 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* ser-go32.c:  Format.  (go32_open):  Use proper return value.
+
+	* configure.in:  Undo conditional configdirs hack for sparclite.
+
+Tue Apr  6 17:07:37 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
+
+	* symtab.c (list_symbols): When call break_command, pass both
+	filename and function name not just function name.
+
+Tue Apr  6 15:00:09 1993  Fred Fish  (fnf@cygnus.com)
+
+	(Changes and new files to make "none" a full fledged configuration)
+	* config/none/{nm-none.h, tm-none.h, xm-none.h}:  New files.
+	Currently only tm-none.h has any meaningful contents.
+	* config/none/none.mh (NAT_FILE):  Use nm-none.h
+	* config/none/none.mh (XM_FILE):  Use xm-none.h
+	* config/none/none.mt (TM_FILE):  Use tm-none.h
+	* Makefile.in (depend):  Remove comment about parse errors in
+	valops.c, it now parses correctly and generates a correct depend
+	line.  Remove line that touches xm.h, tm.h, and nm.h; they are
+	now linked to config/none/{xm-none.h, tm-none.h, nm-none.h}.
+
+Tue Apr  6 09:54:29 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* values.c (USE_STRUCT_RETURN): Only use gcc wierdness for gcc1.
+
+	* xcoffread.c (read_xcoff_symtab): Deal correctly with symbols of
+	exactly 8 characters.
+
+Tue Apr  6 10:31:26 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Sparclite uses sparc config dir.  Also has it's
+	own tm- & .mt files now.  Also add sparclite to configdirs.
+	* go32-xdep.c:  Dummy routines for sigsetmask & strlwr.
+	* config/i386/go32.mh:  Nullify def of TERMCAP.
+	* config/i386/xm-go32.h:  Get rid of redef of EIO.
+	* config/sparc/{sparclite.mh tm-sparclite.h}:  New sparclite
+	specific configs.  Very similar to sun4os4, but without solib.
+	* sparclite/{Makefile.in configure.in}:  First cut at making this
+	dir configgable.
+
+Tue Apr  6 03:10:44 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* ser-go32.c:  First cut at adapting to new serial interface.
+
+Mon Apr  5 22:29:43 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (SFILES OBS):  Add serial.[co] & ser-hardwire.[co].
+	These implement a new serial line interface for talking to remote
+	targets.
+	* configure.in:  Link ser-hardwire.c to ser-unix.c for all hosts,
+	EXCEPT go32, which gets ser-go32.c.
+	* remote.c:  Use new serial interface.  More remote-xxx's to be
+	converted later.
+	* ser-bsd.c, ser-termios.c:  Removed.
+	* serial.c:  New.  Implements common operations for all serial
+	types.
+	* ser-unix.c:  New.  Unix specific serial operations for various
+	flavors of Unix (Posix, SysV, BSD).
+	* serial.h:  Generic serial interface defs.
+	* config/i386/go32.mh, config/i386/i386bsd.h,
+	config/m68k/apollo68b.mh, config/sparc/sun4os4.mh:  Remove
+	ser-bsd.o from XDEPFILES.  All the magic is now handled in
+	configure.in.
+
+Mon Apr  5 20:48:54 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* config/h8500/tm-h8500.h:  Clean up brain damage found by GCC.
+
+Fri Apr  2 08:23:14 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (xcoff_symfile_offsets): Use 0 not addr for offsets.
+
+	* rs6000-tdep.c (frameless_function_invocation): Don't even think
+	about framelessness except on the innermost frame.
+
+	* xcoffexec.c: Call fatal() not abort().
+
+	* stabsread.c (patch_block_stabs): If stab & no symbol, make
+	a LOC_OPTIMIZED_OUT symbol.
+	symtab.h (enum address_class): Add LOC_OPTIMIZED_OUT.
+	findvar.c (read_var_value), printcmd.c (address_info),
+	symmisc.c (print_{,partial_}symbol), c-exp.y (variable),
+	m2-exp.y (yylex): Deal with it.
+	ch-exp.y (yylex): Deal with it.
+
+Thu Apr  1 18:43:02 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (value_from_register):  H8500 specific, check to see
+	if we are looking at short pointer.  If so, skip crock.
+	* h8500-tdep.c (h8500_frame_chain):  Mask down value from
+	read_memory_integer() to avoid getting messed up by sign extension.
+
+Thu Apr  1 16:44:41 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* sparc-tdep.c (in_solib_trampoline), symfile.c (find_pc_section):
+	  ifdef protect using BAD_RICH_HACK.  This should be removed soon.
+	* config/sparc/tm-sun4sol2.h (BAD_RICH_HACK): define.
+
+Thu Apr  1 09:01:38 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* i960-pinsn.c, a29k-pinsn.c: Much abridged, just use libopcodes.a.
+
+	* core.c (dis_asm_print_address): New function.
+
+	* core.c (dis_asm_read_memory): Reinstate 4th arg.  The prototype
+	has been fixed.
+
+Thu Apr  1 09:34:43 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (bpstat_print, bpstat_stop_status): Change to walk the
+	entire breakpoint chain and print only the first entry that needs to
+	be printed and needs to be stopped for. Fixes problems with printing
+	of multiple breakpoints with different conditions.
+	* breakpoint.c (print_it_done): Renamed from print_it_noop as it
+	effectively stops printing of the breakpoint chain.
+	* breakpoint.c (print_it_noop): New routine to print nothing
+	for this breakpoint entry and dont stop printing.
+	* breakpoint.c (breakpoint_re_set_one): mention the reevaluated
+	watchpoint only if it is enabled.
+	* mipsread.c (parse_procedure): Correct incorrect setjmp procedure
+	descriptor from the library to make backtraces through setjmp work.
+	* mipsread.c (fixup_sigtramp): Correct pcreg and fregoffset for
+	sigtramp.
+	* mips-tdep.c (read_next_frame_reg): Provide correct values for
+	all registers saved within sigtramp, cleanup.
+
+Wed Mar 31 12:52:12 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* sparc-pinsn.c: Much abridged, just calls version in libopcodes.a.
+
+Wed Mar 31 21:23:41 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* core.c (dis_asm_read_memory): drop fourth arg which conflicts
+	  with prototype in ../include/dis-asm.h.
+
+Wed Mar 31 12:52:12 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* core.c (dis_asm_{read_memory,memory_error}): New functions.
+	m68k-pinsn.c, h8500-tdep.c, i386-pinsn.c, mips-pinsn.c, z8k-tdep.c:
+	Use read_memory_func interface to disassembler.
+
+Tue Mar 30 15:46:14 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	Teach sparc solaris to next over shared library functions.
+	* solib.[hc] (find_pc_section_from_so_list): new function and
+	  prototype.
+	* sparc-tdep.c (in_solib_trampoline): new function.
+	* symfile.[hc] (find_pc_section): new function and prototypes.
+	* target.[hc] (find_pc_section_from_targets): new function and
+	  prototypes.
+	* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE): redefine to
+	  in_solib_trampoline.
+
+Tue Mar 30 08:06:24 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* infrun.c (wait_for_inferior): Revise comment.
+
+	* command.c (do_setshow_command): Use %u with var_{u,z}integer.
+
+	* command.{c,h}: New var_type var_integer.
+	main.c: Use it for history_size.
+
+	* rs6000-tdep.c, xcoffexec.c, config/rs6000/xm-rs6000.h, breakpoint.c:
+	Lint and byte-order fixups.
+
+	* breakpoint.c (print_it_normal): Return 0 after hitting watchpoint.
+
+	* breakpoint.h (bpstat): New field print_it.
+	breakpoint.c (bpstat_print): Use it.
+	(print_it_normal): New function (from old bpstat_print code).
+	(bpstat_{alloc,stop_status}): Set print_it field.
+
+	* breakpoint.c (bpstat_stop_status): Use catch_errors when
+	evaluating watchpoint condition, via new function watchpoint_check.
+	Also stop if watchpoint disabled due to leaving its block.
+
+	* findvar.c [REG_STRUCT_HAS_ADDR]: Add comment.
+
+Tue Mar 30 00:14:38 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-pinsn.c: Add missing include of dis-asm.h.
+
+Mon Mar 29 15:03:25 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (clean, distclean, realclean):  Recursively apply
+	to subdirs first, rather than last.  This avoids, for example,
+	Makefile being removed in a parent directory before the recursive
+	make is run.
+
+	* alldeps.mak, depend:  Update for below changes.
+
+	* config/m68k/tm-m68k.h:  Renamed from config/m68k/tm-68k.h.
+	* m68k/{tm-3b1.h, tm-altos.h, tm-amix.h, tm-es1800.h,
+	tm-hp300bsd.h, tm-hp300hpux.h, tm-isi.h, tm-news.h, tm-os68k.h,
+	tm-st2000.h, tm-sun2.h, tm-sun3.h, tm-vx68.h}:  Include tm-m68k.h
+	instead of tm-68k.h.
+	* Makefile.in (HFILES):  tm-68k.h renamed to tm-m68k.h.
+	* README, a29k-pinsn.c, m68k-pinsn.c, m68k-stub.c, remote-vx.c,
+	m68k/{altos.mh, altos.mt, apollo68b.mh, nm-apollo68b.h,
+	nm-hp300bsd.h, config/m68k/xm-apollo68b.h}:  Map '68k' to 'm68k'.
+	* a29k/tm-a29k.h, doc/gdbint.texinfo:  Account for renaming of
+	tm-68k.h to tm-m68k.h.
+	* m68k/m68k-fp.mt (TM_FILE):  tm-68k-fp.h renamed to tm-m68k-fp.h.
+	* m68k/m68k-nofp.mt (TM_FILE):  tm-68k-nofp.h renamed to
+	tm-m68k-nofp.h.
+
+	* config/a29k/tm-a29k.h:  Renamed from config/a29k/tm-29k.h.
+	* a29k-pinsn.c:  Renamed from am29k-pinsn.c.
+	* a29k-tdep.c:  Renamed from am29k-tdep.c.
+	* remote-eb.c, config/a29k/tm-ultra3.h:  Include renamed tm-a29k.h.
+	* remote-monitor.c, remote-st2000.c, config/a29k/{nm-ultra3.h,
+	tm-a29k.h, xm-ultra3.h}, config/romp/rtbsd.mh, doc/gdbinv-s.texi,
+	testsuite/gdb.t15/funcargs.exp, testsuite/gdb.t17/callfuncs.exp:
+	Map '29k' to 'a29k'.
+	* config/a29k/{a29k-kern.mt, a29k-udi.mt, a29k.mt, ultra3.mt}
+	(TDEPFILES):  Use renamed a29k-pinsn.o and a29k-tdep.o.
+	* config/a29k/{a29k-udi.mt, a29k.mt} (TM_FILE):  Use renamed
+	tm-a29k.h.
+	* config/a29k/a29k-udi.mt (MT_CFLAGS):  Remove TARGET_AM29K
+	define that does not appear anywhere else in the gdb source tree.
+	* doc/gdbinit.texinfo:  Document renaming of tm-29k.h to tm-a29k.h.
+
+Mon Mar 29 13:55:29 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* breakpoint.c: Add comments regarding breakpoint_re_set.
+
+	* xcoffread.c (sort_syms, compare_symbols): Remove.
+	(xcoff_symfile_read): Use sort_all_symtab_syms from symfile.c
+	not our own sort_syms (it is identical).
+
+	* xcoffread.c: Nuke NAMES_HAVE_DOT define (not used).
+
+Sun Mar 28 11:24:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (breakpoint_re_set_one): Fix storage leak.
+	* breakpoint.c (enable_breakpoint): Don't enable watchpoint if it
+	went out of scope.
+	* exec.c (exec_close): Fix storage leak.
+	* exec.c (exec_file_command): Make sure that bfd doesn't realign the
+	output sections when patching an executable.
+	* mips-nat.c (store_inferior_registers): Use REGISTER_PTRACE_ADDR
+	when writing all registers.
+	* mips-tdep.c (mips_push_dummy_frame): Save floating point registers
+	at the right offset in the dummy frame.
+	* mipsread.c (psymtab_to_symtab_1): Do not complain for stProc,
+	stStaticProc and stEnd symbols as they are generated by gcc-2.x.
+	* mipsread.c (mipscoff_new_init): Initialize stabsread and buildsym.
+
+Fri Mar 26 15:25:05 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (TARFILES):  Avoid trailing backslash.
+
+Fri Mar 26 11:29:30 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* breakpoint.{c,h}: Add exp_string to struct breakpoint and use
+	it in breakpoint_re_set.
+	* breakpoint.c (watch_command, enable_breakpoint): Fetch lazy values.
+
+	* rs6000-tdep.c (single_step): Misc cleanups (CORE_ADDR not int,
+	don't use sizeof(int) for target stuff, etc).
+
+Thu Mar 25 15:03:53 1993  Fred Fish  (fnf@cygnus.com)
+
+	* alldeps.mak, configure.in, i860-break.h, i860-opcode.h,
+	i860-pinsn.c, i860-tdep.c, config/i860/*:  Remove incomplete i860
+	support that can't be integrated anyway due to lack of clear
+	authorship.
+
+Thu Mar 25 12:26:50 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (read_register, write_register):  Make these capable
+	of reading/writing registers that are shorter than REGISTER_TYPE.
+	* (value_from_register):  Install H8500 specific code to return
+	proper value when register is being used as a pointer.
+	* h8500-tdep.c:  Remove extra defines of NUM_REGS.
+	(h8500_skip_prologue):  Use correct lengths for LINK instructions.
+	(FRAME_CHAIN):  Change name to h8500_frame_chain.  Rewrite code to
+	chain frames properly by combining frame pointer with T reg.
+	(init_extra_frame_info):  Delete.  It's now a macro.
+	(frame_args_address):  Don't add PTR_SIZE.  Stack args are already
+	offset by the correct amount off of the frame pointer.
+	(register_byte):  Delete.  It's now a macro.
+	(register_raw_size, register_virtual_size):  Delete.  Replaced by
+	common routine h8500_register_size, cuz there's no difference
+	between the raw & virtual sizes on this machine.
+	(register_convert_to_raw, register_convert_to_virtual):  Delete,
+	cuz there's no difference between the raw & virtual forms.
+	Replaced by memcpy in tm file.
+	(register_virtual_type):  Rename to h8500_register_virtual_type.
+	Get rid of pointer pseudo-regs, use _REGNUM with all reg names.
+	(_initialize_h8500_tdep):  Get rid of crock to ensure that GDB &
+	emulator have same reg offsets.  This is all handled in the
+	simulator code now.
+	(h8500_trapped_internalvar):  New routine to detect references to
+	convenience vars acting as pointer pseudo-regs.
+	(h8500_value_trapped_internalvar):  Conjure up value of pointer
+	pseudo-regs.
+	(h8500_set_trapped_internalvar):  Convert set value in real
+	register references.
+	infcmd.c (read_pc, write_pc):  Add h8500 specific code to handle
+	code segment register.
+	infrun.c (proceed):  Simplify.  Call write_pc instead of doing it
+	by hand.
+	(wait_for_inferior):  Add h8500 specific code to add stack segment
+	when reading SP register.
+	remote-sim.c (fetch_register):  Spacing.
+	tm-h8500.h:  #define GDB_TARGET_IS_H8500 to make it easier to
+	detect cruft.  Redo all register manipulation stuff.  Get rid of
+	pointer pseudo-regs.  (INIT_EXTRA_FRAME_INFO):  Adds stack segment
+	to frame pointer.  (IS_TRAPPED_INTERNALVAL,
+	VALUE_OF_TRAPPED_INTERNALVAR, SET_TRAPPED_INTERNALVAR):  Use these
+	to create internal vars for pointer pseudo-regs.
+
+Thu Mar 25 10:10:28 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in:  Numerous small changes to macro definitions
+	and rules for building gdb distribution tree.  Many macros
+	eliminated or merged, and rules simplified.
+	* alldeps.mak:  Update.
+	* depend:  Update.
+
+Wed Mar 24 13:52:29 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
+
+	* Makefile.in: recurse through SUBDIRS for dvi target too
+
+Wed Mar 24 08:48:30 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Clean up xcoff relocation.
+	objfiles.h (struct objfiles): Add section_offsets, num_sections.
+	symfile.c (syms_from_objfile), xcoffread.c (xcoff_symfile_offsets):
+	Set them.
+	symtab.h (struct general_symbol_info): Add section field.
+	minsyms.c (prim_record_minimal_symbol{,_and_info}): Set it.
+	xcoffread.c: Set section for symbols and msymbols.
+	(struct symtab): Add block_line_section field.
+	buildsym.c (end_symtab): Set it.
+	(end_symtab and callers): Add section parameter.
+	objfiles.c (objfile_relocate): New funciton.
+	xcoffexec.c (vmap_symtab): Use it.
+	xcoffsolib.h (struct vmap): Remove unused fields.
+	config/rs6000/tm-rs6000.h, stack.c, xcoffexec.c: Remove
+	CORE_NEEDS_RELOCATION, symtab_relocated.
+	config/rs6000/tm-rs6000.h: Remove use of loadinfotext.
+	rs6000-tdep.c: Make loadinfotext static.
+	breakpoint.c (fixup_breakpoints): Doc fix.
+	symtab.h (struct symtab), config/rs6000/tm-rs6000.h, buildsym.c
+	(end_symtab): primary field replaces nonreloc.
+
+Tue Mar 23 00:10:53 1993  John Gilmore  (gnu@cygnus.com)
+
+	* symtab.h (struct linetable_entry):  Remove confusing comment.
+
+Tue Mar 23 00:01:23 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* Makefile.in: add installcheck target
+
+Mon Mar 22 16:17:58 1993  Fred Fish  (fnf@cygnus.com)
+
+	* config/{a29k, arm, convex, gould, h8300, i386, i860, i960, m68k,
+	m88k, mips, none, ns32k, pa, pyr, romp, rs6000, sparc, tahoe, vax,
+	z8k}:  New directories to hold cpu specific configuration files.
+	Naming follows gcc convention.
+	* config/{*.mt, *.mh}:  All target and host makefile fragment
+	config files moved to an appropriate config/<cpu> subdirectory.
+	* nm-*, xm-*, tm-*:  All native, host, and target files, which
+	get linked to nm.h, xm.h, and tm.h respectively by configure,
+	moved to appropriate config/<cpu> subdirectory.
+	* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
+	Native, host, and target files that are common across more than
+	one cpu architecture and included by one of the configured
+	native, host, or target files, get moved to config directory.
+	* Makefile.in (INCLUDE_CFLAGS):  Add -I${srcdir}/config to
+	pick up native, host, or target include files moved to one of
+	the config subdirectories, and that are included by other files.
+	* Makefile.in (alldeps.mak):  Modify to account for new config
+	directory structure.
+	* alldeps.mak, depend:  Update for new config directory structure.
+	* config/*/[ntx]m-*.h:  Modify all files that include other
+	[ntx]m-*.h files to use path relative to gdb/config.  I.E.
+	"a29k/tm-ultra3.h" includes "a29k/tm-29k.h" rather than just
+	"tm-29k.h".
+	* remote-eb.c (tm-29k.h):  Include a29k/tm-29k.h.
+	* mipsread.c (tm-mips.h):  Include mips/tm-mips.h.
+	* i860-pinsn.c (tm-i860.h):  Include i860/tm-i860.h.
+	* configure.in:  Default gdb_host_cpu to host_cpu, and remap
+	the ones where the default is not unique or different than the
+	config subdirectory name.  Similarly, handle gdb_target_cpu.
+	Modify configure.in as appropriate to make use of gdb_host_cpu
+	and gdb_target_cpu to find makefile fragments and make links.
+
+Mon Mar 22 12:36:24 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c (compare_blocks): Sort blocks with the same start
+	address by decreasing ending address.
+
+Mon Mar 22 20:36:04 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (parse_procedure): Save cur_fdr accross call to
+	lookup_symbol as it might get clobbered by the call.
+
+	* mipsread.c (parse_partial_symbols): Use ADD_PSYMBOL_ADDR_TO_LIST.
+	The previous code did not initialize the language field for the psymtab
+	entry.
+
+Sat Mar 20 00:33:39 1993  John Gilmore  (gnu@cygnus.com)
+
+	* c-exp.y (parse_number):  Avoid shift warning.
+	* serial.h (struct ttystate):  Declare empty one on DOS.
+
+Fri Mar 19 12:59:50 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* xm-sun4os4.h:  Return type of free() should be void, not int.
+
+	* vx-share/vxWorks.h:  Remove #def of NULL.
+
+Fri Mar 19 11:28:18 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* tm-rs6000.h: Nuke no-op STAB_REG_TO_REGNUM.
+
+Fri Mar 19 07:40:09 1993  Steve Chamberlain  (sac@cygnus.com)
+
+	* z8k-tdep.c (print_insn): Include the new dis-asm header file.
+
+Thu Mar 18 14:26:57 1993  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* ieee-float.c: Moved to ../libiberty.
+	* ieee-float.h: Moved to ../include.
+	* Makefile.in:  Update accordingly.
+	* i386-pinsn.c (print_insn), m68k-pinsn.c (print_insn):
+	Convert to stubs that call disassemblers in ../opcodes/*-dis.c.
+	* m68k-tdep.c:  Removed definition of ext_format ext_format_68881;
+	it is now in ../opcodes/m68881-ext.c.
+	* mips-tdep.c (mips_skip_prologue):  Try to skip more of the
+	prologue (some callers _do_ care).
+	* mips-pinsn.c (print_insn), z8k-tdep.c (print_insn):  Convert to
+	new interface of ../opcodes/*-dis.c. 
+	* ch-exp.y:  Add #include <ctype.h>.
+
+Thu Mar 18 11:57:49 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffexec.c (exec_close): Don't close exec_bfd twice.
+
+	* xcoffread.c (enter_line_range): endaddr is exclusive, not inclusive.
+
+Wed Mar 17 09:46:31 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (arrange_linetable): Use x{m,re}alloc not {m,re}alloc.
+
+Wed Mar 17 11:28:11 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* z8k-tdep.c (extract_return_value, write_return_value,
+	store_struct_return): New functions from macros in tm-z8k.h.
+	
+Wed Mar 17 11:23:06 1993  Fred Fish  (fnf@cygnus.com)
+
+	* valops.c (value_arg_coerce):  Apply temporary patch to
+	fix problem with coercion of array and function types when
+	passed as arguments to C functions, pending a more complete
+	review of when and how coercion should be done, depending
+	upon context and language.
+
+Wed Mar 17 09:46:31 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (MIN_TBTABSIZ): Change to 12.
+
+	* xcoffread.c (xcoff_symfile_read): Only read stringtab and
+	debugsec if there are a non-zero number of symbols.
+
+Tue Mar 16 18:08:45 1993  John Gilmore  (gnu@cygnus.com)
+
+	* command.c (show_user):  Avoid fprintf_filtered botch (AGAIN!).
+
+Tue Mar 16 15:18:17 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffexec.c (add_vmap): Wrap symbol read in catch_errors.
+
+	* xcoffread.c (read_symbol_lineno): Look to end of symbols for .bf,
+	not just 50 symbols.
+	(symtbl_num_syms): New variable.
+	(read_xcoff_symtab): Set it.
+	(read_symbol_nvalue): Check for bad symno.
+	(read_symbol_{lineno,nvalue}, callers): Don't pass symtable; it's
+	always symtbl.
+
+Tue Mar 16 10:09:05 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* config/rs6000.mh:  Get rid of -Dfd_set=int crock.
+	This is defined in defs.h if necessary.
+	* vx-share/vxWorks.h:  Remove #defs of min and max.
+	* vx-share/xdr_ld.c, vx-share/xdr_ptrace.c,
+	vx-share/xdr_rdb.c:  include defs.h.
+
+Fri Mar 12 09:33:23 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (retrieve_tracebackinfo): Move assignment out
+	of while condition.
+
+	* xcoffread.c (enter_line_range): complain() on bad endoffset.
+	xcoffread.c: Doc fixes.
+
+Tue Mar  9 09:56:12 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* tm-rs6000.h (CORE_NEEDS_RELOCATION): Just call xcoff_relocate_core.
+	xcoffexec.c (xcoff_relocate_core): New function.
+	(text_adjustment): Removed.
+	(add_vmap): Return the vmap.
+	rs6000-tdep.c (add_text_to_loadinfo): No longer static.
+
+Fri Mar  5 05:22:46 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffsolib.h: Add objfile member to struct vmap.
+	xcoff{exec,solib}.c: Use it, not lookup_objfile_bfd.
+	xcoffexec.c (add_vmap): Allocate objfiles here.
+
+Sun Mar 14 02:54:15 1993  John Gilmore  (gnu@cygnus.com)
+
+	Support 68000 series without floating point.
+
+	* configure.in (m68000-*-{aout,elf,coff}):  New configs.
+	* tm-68k-nofp.h:  New file, lacks 68881 support.
+	* config/m68k-nofp.mt:  New file.
+
+Sun Mar 14 02:30:08 1993  John Gilmore  (gnu@cygnus.com)
+
+	Remove a few remaining underscore/no-underscore remnants from
+	config files.
+
+	* config/{m68k-un.mt, sparc-un.mt}:  Remove.
+	* config/m68k-noun.mt: Rename to m68k-fp.mt.
+	* config/sparc-noun.mt: Rename to sparc-em.mt.
+	* tm-68k-noun.h, tm-spc-noun.h:  Remove.
+	* tm-68k-un.h:  Rename to tm-68k-fp.h.
+	* tm-spc-un.h:  Rename to tm-spc-em.h.
+	* tm-sun4sol2.h: Cleanup.
+	* configure.in (m68k-*, sparc-* targets):  Corresponding changes.
+
+Sat Mar 13 14:58:22 1993  John Gilmore  (gnu@cygnus.com)
+
+	* symmisc.c (std_in, std_out, std_err):  Move initializations
+	to runtime code, in case they aren't constant.
+
+Fri Mar 12 16:23:54 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* symtab.c (find_pc_symtab): some object file formats, notably
+	  mips, have holes in the address ranges of symtabs.  Change
+	  this algorithm from first hit to tightest fit.
+
+	* mips-tdep.c (heuristic_proc_start): if we walk the pc into the
+	  fence post without finding the enclosing function, then print a
+	  warning.
+
+Thu Mar 11 09:33:01 1993  Fred Fish  (fnf@cygnus.com)
+
+	* utils.c (fputs_demangled, fprint_symbol):  Remove.
+	* utils.c (fprintf_symbol_filtered):  New function which combines
+	the functionality of fputs_demangled and fprint_symbol.  Uses a
+	caller provided language parameter to select the appropriate 
+	demangler, and caller provided args to pass to the demangler.
+	* defs.h (enum language):  Move further up in file so enum can
+	be used in prototypes.
+	* defs.h (fputs_demangled, fprint_symbol):  Remove prototypes.
+	* defs.h (fprintf_symbol_filtered):  Add prototype.
+	* c-typeprint.c (cp_type_print_method_args):  Replace calls to
+	fputs_demangled with call to fprintf_symbol_filtered.
+	* cp-valprint.c (demangle.h):  Include
+	* cp-valprint.c (cp_print_value_fields):  Replace calls to
+	fprint_symbol with calls to fprintf_symbol_filtered.
+	* printcmd.c (print_frame_args):  Replace call to fprint_symbol
+	with call to fprintf_symbol_filtered.
+	* stack.c (print_frame_info):  Remove obsolete code so we don't
+	have to update fputs_demangled usage in it.
+	* stack.c (print_frame_info, frame_info):  Add language variable
+	to pass to fprintf_symbol_demangled and initialize it from the
+	symbol's language.  Replace calls to fputs_demangled with calls
+	to fprintf_symbol_filtered.
+	* symtab.c (find_methods):  Replace call to fputs_demangled with
+	call to fprintf_symbol_filtered.
+	* ch-valprint.c (demangle.h):  Include.
+	* ch-valprint.c (chill_print_value_fields):  Replace call to
+	fprint_symbol with call to new fprintf_symbol_filtered.
+
+Wed Mar 10 17:37:11 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump version to 4.8.2.
+
+	* main.c (source_command):  Require an explicit pathname of file
+	to source, since previous behavior of defaulting to gdb init file
+	was troublesome and undocumented.
+	* printcmd.c (disassemble_command):  Add missing '{}' pair to
+	else with two statements.  Bug reported by Stephane Tsacas
+	<slt@isoft.fr>.
+	* symtab.c (find_pc_line):  Don't complain about zero length or
+	negative length line numbers for the moment, since we may not own
+	the terminal when called, such as when single stepping.  (FIXME)
+	* language.h (CAST_IS_CONVERSION):  True if current language is
+	C++ as well as C.  Fix from Peter Schauer.
+	* environ.c (get_in_environ, set_in_environ, unset_in_environ):
+	Use STREQN macro rather than bare '!strncmp()'.
+	* environ.c (unset_in_environ):  Avoid use of memcpy on
+	overlapping memory regions, as suggested by Paul Eggert
+	<eggert@twinsun.com>.
+	* c-exp.y (%union struct):  Remove unused ulval as suggested
+	by Paul Eggert <eggert@twinsun.com>.
+
+Mon Mar  8 19:03:06 1993  Fred Fish  (fnf@cygnus.com)
+
+	* main.c (gdbinit):  Make static.
+	* main.c (inhibit_gdbinit):  Move to file scope.
+	* main.c (main):  Remove local inhibit_gdbinit.
+	* main.c (source_command):  Don't source '.gdbinit' file by
+	default if gdb has been told to ignore it.
+
+Sun Mar  7 21:58:53 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Makefile.in (MAKEOVERRIDES): Define to be empty for GNU Make
+	3.63.
+
+Fri Mar  5 17:39:45 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* printcmd.c (print_address_symbolic):  Only print if offset
+	is shorter than max_symbolic_offset.
+	(initialize_printcmd):  `set print max-symbolic-offset'.
+
+	* am29k-tdep.c (TAGWORD_ZERO_MASK):  New #define.
+	(examine_tag):  Use it.
+	(read_register_stack):  Only look in the local registers for a
+	memory address if it's between rfb and rsp; go to memory otherwise.
+	(initialize_29k):  Fix call_scratch_address doc.  Remove reginv_com.
+	(reginv_com):  Remove ancient kludge command.
+
+Fri Mar  5 17:16:26 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* tm-irix3.h (ZERO_REGNUM): copy this macro from tm-mips.h so that
+	  irix4 will again compile.
+
+	* tm-mips.h (GDB_TARGET_IS_MIPS): no longer used, now removed.
+
+	* configure.in: accept mips-sgi-irix4* for irix4.
+
+Fri Mar  5 07:49:48 1993  Steve Chamberlain  (sac@lisa.cygnus.com)
+
+	* z8k-tdep.c (print_register_hook): Lint.
+
+Thu Mar  4 17:42:03 1993  John Gilmore  (gnu@cygnus.com)
+
+	Lint fixes from Paul Eggert (eggert@twinsun.com):
+
+	* command.c (do_setshow_command):  var_uintegers are unsigned.
+	* sparc-tdep.c (save_insn_opcodes, restore_insn_opcodes): 
+	unsigned, since they use hex values with the high bit set.
+
+Thu Mar  4 08:22:55 1993  Fred Fish  (fnf@cygnus.com)
+
+	Fixes submitted by Karl Berry (karl@nermal.hq.ileaf.com):
+	* m88k-pinsn.c (sprint_address):  Use SYMBOL_NAME macro to
+	access symbol name.  
+	* m88k-nat-c (SXIP_OFFSET, SNIP_OFFSET, SFIP_OFFSET):  Enclose
+	macro definitions in parenthesis.
+
+	* dbxread.c (dbx_symfile_init):  Catch the case where there is
+	no string table, but the only way we find out is by reading zero
+	bytes from EOF.
+
+Wed Mar  3 15:51:28 1993  Fred Fish  (fnf@cygnus.com)
+
+	* dbxread.c (dbx_symfile_init):  Make size of the string table
+	size field a define (DBX_STRINGTAB_SIZE_SIZE).  Ensure that the
+	offset to the string table is nonzero and handle the nonexistant
+	string table case, should it occur.  Ensure that the string table
+	size read from the file is reasonable, with a minimum lower bound
+	of DBX_STRINGTAB_SIZE_SIZE instead of zero.
+
+Wed Mar  3 07:23:03 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Makefile.in: Changes to build testsuite correctly.
+	(FLAGS_TO_PASS): Added CXX and CXXFLAGS.
+	(CC_FOR_TARGET, CXX, CXX_FOR_TARGET): New variables.
+	(TARGET_FLAGS_TO_PASS): New variable.
+	(SUBDIRS): Added testsuite.
+	(all): Build testsuite using TARGET_FLAGS_TO_PASS, so that
+	testsuite is compiled with CC_FOR_TARGET rather than CC.
+
+Tue Mar  2 17:57:56 1993  Fred Fish  (fnf@cygnus.com)
+
+	* dbxread.c (dbx_symfile_init):  Fix for nonexistant string table,
+	reported by mycroft@gnu.ai.mit.edu.
+
+	(Ultrix 2.2 support from Michael Rendell <michael@mercury.cs.mun.ca>)
+	* configure.in (vax-*-ultrix2*):  New triplet.
+	* config/vaxult2.mh:  New file.
+	* xm-vaxult2.h:  New file.
+
+	* c-exp.y (parse_number):  Change high_bit to unsigned.
+	* demangle.c:  Change all references to cfront to ARM, since the
+	actual algorithm is the one specified in the Annotated Reference
+	Manual.  This was confusing users into thinking that full cfront
+	support was implemented.
+	* dwarfread.c (CFRONT_PRODUCER):  Remove, was never really used.
+	* eval.c (evaluate_subexp):  For STRUCTOP_PTR pass the arg type
+	directly to lookup_struct_elt_type, which will do the
+	dereferencing itself.
+	* gdbtypes.c (lookup_struct_elt_type):  Expand comments.  Fix
+	NULL dereferencing bug for unnamed structs, comment out
+	questionable code.
+	
+Mon Mar  1 17:54:41 1993  John Gilmore  (gnu@cygnus.com)
+
+	* coffread.c (process_coff_symbol):  Change PCC argument correction
+	so that it only happens on big-endian targets; so that it only
+	happens if the short or char argument is aligned on an int
+	boundary; and so that it changes the location, rather than the
+	type, of the argument.  These changes tend to parallel similar
+	(old) changes in stabsread.c.
+
+	* coffread.c (coff_read_enum_type):  Use the specified size for
+	enums, don't assume that they are int-sized.
+
+	* c-valprint.c (c_val_print):  Don't assume enums are the same as
+	ints.
+
+	* coredep.c:  Handle NO_PTRACE_H in coredep.c.  Fix by Michael
+	Rendell, <michael@mercury.cs.mun.ca>.
+
+Mon Mar  1 09:25:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* language.h (local_decimal_format_custom):  Add prototype.
+	* language.c (local_decimal_format_custom):  Add function, bug
+	reported by Robert R. Henry (rrh@tera.com).
+
+Fri Feb 26 18:33:18 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* xcoffexec.c (vmap_ldinfo):  Fix "/" for '/' typo, reported
+	by Josef Leherbauer, joe@takeFive.co.at.
+
+Wed Feb 24 19:17:11 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* symfile.c (syms_from_objfile), tm-29k.h, tm-3b1.h, tm-68k-un.h,
+	tm-altos.h, tm-arm.h, tm-convex.h, tm-es1800.h, tm-h8300.h,
+	tm-hp300bsd.h, tm-hp300hpux.h, tm-hppa.h, tm-i386bsd.h,
+	tm-i386v.h, tm-i960.h, tm-irix3.h, tm-isi.h, tm-linux.h,
+	tm-m88k.h, tm-merlin.h, tm-mips.h, tm-news.h, tm-np1.h, tm-pn.h,
+	tm-pyr.h, tm-rs6000.h, tm-spc-un.h, tm-sun386.h, tm-sunos.h,
+	tm-symmetry.h, tm-sysv4.h, tm-tahoe.h, tm-umax.h, tm-vax.h,
+	tm-vx68.h, tm-z8k.h:  Remove remnants of NAMES_HAVE_UNDERSCORE.
+
+Wed Feb 24 07:41:15 1993  Fred Fish  (fnf@cygnus.com)
+
+	* symtab.h (SYMBOL_INIT_DEMANGLED_NAME):  Initialize contents
+	of demangled name fields to NULL if no demangling exists for
+	a symbol.  SYMBOL_INIT_LANGUAGE_SPECIFIC does this for new
+	symbols if their language is known at the time they are created,
+	but sometimes the language is not known until later.
+
+	* ch-typeprint.c (chill_print_type_base):  Name changed to
+	chill_type_print_base to match pattern for C and C++ names.
+	* ch-typeprint.c (chill_print_type):  Change "char" to "CHAR"
+	to be consistent with other usages.
+	* ch-typeprint.c (chill_type_print_base):  Add support for
+	printing Chill STRUCT types.
+	* ch-valprint.c:  Include values.h.
+	* ch-valprint.c (chill_print_value_fields):  New function and
+	prototype for printing Chill STRUCT values.
+	* ch-valprint.c (chill_val_print):  Fix call to val_print_string
+	that was being called with two args instead of three.
+	* ch-valprint.c (chill_val_print):  Call chill_print_value_fields
+	to print Chill STRUCT values.
+
+Tue Feb 23 18:58:11 1993  Mike Werner  (mtw@poseidon.cygnus.com)
+
+	* configure.in: added testsuite to configdirs.
+
+Tue Feb 23 11:46:11 1993  Mike Stump  (mrs@cygnus.com)
+
+	* doc/stabs.texi: The `this' pointer is now known by the name
+	`this' instead of `$t'.
+
+Tue Feb 23 11:21:33 1993  Fred Fish  (fnf@cygnus.com)
+
+	* dwarfread.c (read_tag_string_type):  Rewrite to allow forward
+	references of TAG_string_type DIEs in user defined types.
+	* ch-lang.c (chill_create_fundamental_type):  Track compiler
+	change that now emits debugging info with the type long for Chill
+	longs.
+
+Mon Feb 22 15:21:54 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* remote-mips.c: New file; implements MIPS remote debugging
+	protocol.
+	* config/idt.mt: New file; uses remote-mips.c
+	* configure.in (mips-idt-ecoff): New target; uses idt.mt.
+
+	* mips-tdep.c (mips_fpu): New variable; controls use of MIPS
+	floating point coprocessor.
+	(mips_push_dummy_frame): If not mips_fpu, don't save floating
+	point registers.
+	(mips_pop_frame): If not mips_fpu, don't restore floating point
+	registers.
+	(_initialize_mips_tdep): New function; let the user reset mips_fpu
+	variable.
+	* tm-mips.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): If not
+	mips_fpu, don't use fp0 as floating point return register.
+	(FIX_CALL_DUMMY): If not mips_fpu, don't save floating point
+	registers.
+
+Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)
+
+        * gdb/testsuite: made modifications to testcases, etc., to allow
+        them to work properly  given the reorganization of deja-gnu and the
+        relocation of the testcases from deja-gnu to a "tool" subdirectory.
+
+Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)
+
+	* gdb/testsuite: Initial creation of gdb/testsuite.
+	Migrated dejagnu testcases and support files for testing nm to
+	gdb/testsuite from deja-gnu.  These files were moved "as is"
+	with no modifications.	This migration is part of a major overhaul
+	of dejagnu.  The modifications to these testcases, etc., which
+	will allow them to work with the new version of dejagnu will be
+	made in a future update.
+
+Fri Feb 19 18:36:55 1993  John Gilmore  (gnu@cygnus.com)
+
+	* NEWS:  Add reminders for next release.
+
+Fri Feb 19 10:01:39 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c (parse_lines): Correct check for files compiled with
+	-g1.
+
+Fri Feb 19 05:56:15 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  4.8.1 to distinguish local versions.
+
+Fri Feb 19 01:32:58 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  GDB-4.8 release!
+	* README, NEWS:  Update for release.
+
+Thu Feb 18 22:44:40 1993  Stu Grossman  (grossman@cygnus.com)
+
+	* am29k-pinsn.c (print_insn):  Minor nits with const.
+	* am29k-tdep.c:  More minor nits with arg types for
+	supply_register, NULL vs. 0, read_register_gen, & reginv_com.
+
+Thu Feb 18 22:38:03 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gcc.patch:  Update for a different GCC (G++) bug.
+	* main.c (print_gdb_version):  Update copyright year to 1993.
+	* nm-hp300bsd.h:  Decide whether this is BSD 4.3 or 4.4,
+	conditionalize this file on it.  FIXME, right way is to split
+	these into two config files.  
+	(ATTACH_DETACH):  Define for BSD 4.4
+	(PTRACE_ARG_TYPE):  caddr_t for BSD 4.4, unset for 4.3.
+	(U_REGS_OFFSET):  Revise for 4.4.
+	(REGISTER_U_ADDR):  Separate for 4.4, but it doesn't work yet.
+	* xm-hp300bsd.h:  Move definitions of UINT_MAX, INT_MAX, INT_MIN,
+	LONG_MAX into this file to avoid cpp "redefinition" warnings.
+
+Thu Feb 18 16:13:28 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* nm-hp300bsd.h (PTRACE_ARG3_TYPE): FSF's hp300's have int* not
+	  caddr_t.
+
+Thu Feb 18 04:10:06 1993  John Gilmore  (gnu@cygnus.com)
+
+	* c-lang.c (c_printstr):  Bugfix for length==0 case.
+
+	* c-lang.c (c_printstr):  If a C string ends in a null, don't
+	print the null.
+
+Thu Feb 18 02:39:21 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* defs.h (STRCMP):  Make it work for unsigned chars.
+
+Thu Feb 18 01:56:06 1993  John Gilmore  (gnu@cygnus.com)
+
+	* nm-hp300bsd.h (ATTACH_DETACH, PTRACE_ATTACH, PTRACE_DETACH): define.
+	* config/hp300bsd.mh (REGEX, REGEX1):  Define.
+	* m68k-pinsn.c (BREAK_UP_BIG_DECL, AND_OTHER_PART):  #if __GNUC__,
+	define to kludge the large opcode table into two smaller tables,
+	since GCC take exponential space to build the table.  Lint.
+	(NOPCODES):  Remove, use "numopcodes" from opcode/m68k.h instead.
+
+Wed Feb 17 19:24:40 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to 4.7.9.
+	* xm-hp300bsd.h:  Define PSIGNAL_IN_SIGNAL_H and put a compatible
+	definition here, to handle both BSD 4.3 and 4.4 systems.
+	* mipsread.c (ZMAGIC):  #undef to avoid duplicate define.
+	* remote.c (alarm):  Move declaration to global level, before 
+	first reference to it.
+	* tm-i386bsd.h (NUM_REGS):  There are only eleven, not twelve.
+	* dbxread.c (process_one_symbol):  Cast to unsigned char, not int.
+
+Wed Feb 17 13:40:29 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* remote.c (readchar): forward declare alarm which otherwise looks
+	  like an undeclared variable to gcc.
+
+	* dbxread.c (process_one_symbol): cast enum value N_SO into int
+	  when comparing against an int.  Avoids superfluous warning from
+	  vax ultrix 4.2 cc.
+
+	* inflow.c (set_sigint_trap): add cast to assignment from signal.
+	  Avoids superfluous warnings from some systems and/or compilers
+	  (like vax ultrix 4.2.)
+
+	* language.c (struct op_print unk_op_print_tab): use the enum
+	  values rather naked zeros as initializers.  Avoids warnings from
+	  ultrix type compilers.
+
+Tue Feb 16 00:53:20 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to 4.7.6.
+	(SFILES_SUBDIR):  Add 29k-share/udi_soc.
+	(SFILES_SUBSUBDIR):  Move 29k-share/udi files to this macro.
+	(alldeps.mak):  Make ALLDEPFILES_SUBSUBDIR for files in sub sub dirs.
+	(ALLDEPFILES_SUBSUBDIR):  Depend on this for deeper dep files.
+	(HFILES):  Remove all nm-* except nm-trash.h.  Add ns32k-opcode.h.
+	(depend):  Fix bug where nm-files in config files weren't noticed.
+	(make-proto-gdb-1):  Avoid changing directories while building new
+	prototype.  Build SFILES_SUBSUBDIR with longer symlinks.
+
+Mon Feb 15 20:48:09 1993  John Gilmore  (gnu@cygnus.com)
+
+	* remote.c:  Improve error recovery.  Allow user to break out
+	of initial connection attempt with INTERRUPT.  Treat a timeout
+	while waiting for remote packet like a retry, unless the remote
+	side is actively running user code.  Fix a few long printf_filtered's.
+
+	* xcoffread.c (read_xcoff_symtab):  Don't use null symbol name for
+	trampoline symbols.
+
+	* buildsym.c (start_subfile):  Allow null file name.
+
+Fri Feb 12 15:46:49 1993  K. Richard Pixley  (rich@cygnus.com)
+
+	* xcoffread.c (process_xcoff_symbol, read_symbol_lineno): complain
+	  expects a pointer to complaint rather than a complaint
+	  structure.
+	  (process_linenos): free the previously allocated subfile name,
+	  then allocate the new one from the heap.
+
+Fri Feb 12 08:06:05 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* h8300-tdep.c, tm-h8300.h: turn off some experimental features
+
+Thu Feb 11 00:59:07 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stabsread.c (dbx_lookup_type):  Handle negative type numbers.
+	Previously, would bogusly index off the bottom of type_vector.
+	(rs6000_builtin_type):  Accept type number as argument.
+	(read_type, case '-'):  Handle negatives like any other type number.
+
+	* symfile.c (deduce_language_from_filename):  Handle null name.
+
+	* mips-tdep.c (isa_NAN):  Fix byte order dependency.
+	Reported by Nobuyuki Hikichi <hikichi@sra.co.jp>,
+	fixed by sato@sm.sony.co.jp.
+
+	* xcoffread.c (parmsym):  Don't use an initializer to set up
+	this struct symbol.  Set it up in initialize_xcoffread.
+	(read_xcoff_symtab, xcoff_symfile_read):  Surround code that only
+	works on real rs/6000 target with #ifndef FAKING_RS6000.
+
+Wed Feb 10 23:42:37 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stabsread.c (rs6000_builtin_type):  Move function from
+	xcoffread.c:builtin_type.
+	* xcoffread.c (builtin_type):  Move to stabsread.  Remove
+	IBM6000_HOST dependency.  Move misplaced comments.
+	(various):  Change printf's to complaints.
+	(patch_block_stabs, process_xcoff_symbol case C_DECL):  Add
+	objfile argument to read_type calls under #if 0.
+	(process_xcoff_symbol case C_RSYM):  Fix typo in #ifdef.
+	* xcoffexec.c (map_vmap):  Don't allocate an objfile for the exec_file.
+	* Makefile.in:  xcoffread.o is not built by default.
+	* xm-rs6000.h (IBM6000_HOST):  Remove.
+	* config/rs6000.mh (NATDEPFILES): xcoffread.o is native only.
+	* doc/gdbint.texinfo:  Eliminate IBM6000_HOST, document
+	IBM6000_TARGET.
+
+Wed Feb 10 18:31:20 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* findvar.c (read_var_value):  If REG_STRUCT_HAS_ADDR, then set
+	VALUE_LVAL to be lval_memory so that we don't try to modify wild
+	register numbers when user tries to modify elements in structs
+	passed as arguments.
+	* inflow.c (child_terminal_info):  Move banner outside of system
+	specific #ifdefs.
+	* tm-hppa.h (REG_STRUCT_HAS_ADDR):  Define this for HPPA, which
+	passes struct/union arguments by address.
+
+Wed Feb 10 15:34:46 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Based on patch from Kean Johnston <maw@netcom.com>:
+	* nm-i386sco4.h: New file.  Like nm-i386sco.h, but define
+	ATTACH_DETACH, PTRACE_ATTACH and PTRACE_DETACH.
+	* config/i386sco4.mh (NAT_FILE): Use nm-i386sco4.h.
+
+Tue Feb  9 20:07:18 1993  John Gilmore  (gnu@cygnus.com)
+
+	* remote-udi.c (FREEZE_MODE):  Fix && for & typo.  Found and
+	fixed by Lynn D. Shumaker, shumaker@saifr00.cfsat.honeywell.com.
+
+Tue Feb  9 08:18:07 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* config/i386sco4.mh (MUNCH_DEFINE): Pass -p to nm to avoid bug in
+	cc debugging output.
+
+Tue Feb  9 00:19:28 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stabsread.c (define_symbol):  Complain about unrecognized names
+	that begin with CPLUS_MARKER (often '$'), but don't die.  Fix
+	suggested by gb@cs.purdue.edu (Gerald Baumgartner).
+	(read_cpp_abbrev):  Don't use the class name as part of the
+	vtable pointer member name (_vptr$) in $vf abbrevs or unrecognized
+	abbrevs.  Inspired by Mike Tiemann.
+	(read_tilde_fields):  Comment.  Remove ancient dead code.
+	Remove erroneous but non-dead code.  Simplify.  Add complaints.
+	(in general):  Remove extraneous (parentheses) in return
+	statements.
+
+Fri Feb  5 14:01:22 1993  John Gilmore  (gnu@cygnus.com)
+
+	* coffread.c (coff_lookup_type):  Fix fencepost error reported
+	by Art Berggreen, <arg@opal.acc.com>.
+
+	Fix long file name bug reported on SCO Open Desktop 2.0 by Ulf Lunde
+	<Ulf.Lunde@kvatro.no> and Dag H. Wanvik <Dag.H.Wanvik@kvatro.no>:
+	  
+	* coffread.c (getfilename):  Eliminate COFF_NO_LONG_FILE_NAMES
+	test, which is apparently left over from when we used native
+	include files and couldn't depend on the member names being there.
+	* tm-3b1.h, tm-altos.h, tm-i386v.h:  Don't set it.
+
+Thu Feb  4 12:23:15 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c: Major overhaul to use new BFD symbol table reading
+	routines.  Now swaps information as it is needed, rather than
+	swapping everything when the file is read.
+
+Thu Feb  4 01:52:36 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (TARDIRS):  Add sparclite demo dir.
+	(*.tab.c):  Change dependency on Makefile to depend on
+	Makefile.in, otherwise it always rebuilds after configuring.
+	Force output *.tab.c file into current directory even in "make"
+	versions that rewrite dependent file names used in command lines.
+
+	* TODO:  Remove some things we did.
+	* am29k-opcode.h, convx-opcode:  Remove; now in ../include/opcode.
+	* os68k-xdep.c:  Remove; useless file (os68k is a target only).
+	* convex-pinsn.c:  Use ../include/opcode/convex.h.  Add CONST.
+	* symtab.h:  Eliminate unnamed unions and structs.
+
+Wed Feb  3 14:48:08 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (VERSION):  Roll to 4.7.5.
+
+Tue Feb  2 20:47:42 1993  John Gilmore  (gnu@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set_one):  Handle watchpoints when
+	re-evaluating symbol pointers.
+
+Tue Feb  2 16:10:31 1993  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (lcurly, rcurly):  New nonterminals.
+	* c-exp.y (exp):  Use lcurly and rcurly for arrays and UNOP_MEMVAL
+	constructs.
+	* parse.c (free_funcalls):  Moved prototype from parser-defs.h,
+	made function static.
+	* parse.c (struct funcall):  Moved struct def from parser-defs.h.
+	* parse.c (funcall_chain):  Moved from parser-defs.h, made static.
+	* parse.c (start_arglist):  
+	* parser-defs.h (free_funcalls):  Moved prototype to parse.c.
+	* parser-defs.h (struct funcall):  Moved struct def to parse.c.
+	* parser-defs.h (funcall_chain):  Moved to parse.c.
+	* printcmd.c (print_frame_nameless_args): Fix prototype.
+	* tm-mips.h (setup_arbitrary_frame):  Fix prototype.
+	* tm-sparc.h (setup_arbitrary_frame):  Fix prototype.
+	* valops.c (typecmp):  Moved prototype from values.h.
+	* value.h (typecmp):  Moved prototype to valops.c, made static.
+	* ch-exp.y (yylex):  Change way control sequences are disabled.
+	
+Tue Feb  2 16:11:43 1993  John Gilmore  (gnu@cygnus.com)
+
+	* tm-mips.h, tm-sparc.h:  Fix thinko in SETUP_ARBITRARY_FRAME.
+
+Tue Feb  2 15:30:33 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c (upgrade_type): Build array types correctly, using
+	create_range_type and create_array_type.
+
+Tue Feb  2 00:19:08 1993  John Gilmore  (gnu@cygnus.com)
+
+	* remote-nindy.c:  Cleanup.
+
+	* infrun.c (wait_for_inferior):  When rolling back the PC after
+	a breakpoint, call write_pc so that NPC gets rolled back as well
+	(for the 29K).
+
+	* blockframe.c (inside_entry_file, inside_main_func,
+	inside_entry_func):  PC of zero is always "bottom of stack".
+
+	* printcmd.c (print_frame_args, print_frame_nameless_args):
+	Let print_frame_nameless_args decide whether there are any,
+	laying groundwork for possibly later printing 29K args for
+	functions where we have tag words but no symbols.	
+
+Mon Feb  1 18:09:58 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* Makefile.in: fix GDB doc targets for new doc subdir structure
+
+Mon Feb  1 17:56:47 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stack.c (parse_frame_specification):  Parse as many arguments
+	as there are (up to MAXARGS).  Pass all of them in argc, argv
+	format to SETUP_ARBITRARY_FRAME.  Put the burden of checking how
+	many there were, onto SETUP_ARBITRARY_FRAME.
+	* tm-mips.h, tm-sparc.h:  Corresponding changes.
+	* mips-tdep.c, sparc-tdep.c:  Ditto.
+
+Mon Feb  1 17:19:37 1993  John Gilmore  (gnu@cygnus.com)
+
+	* hp300ux-nat.c:  Update copyrights.
+	* mipsread.c (parse_partial_symbols):  Complain about block
+	indexes that go backwards.  Fix from Peter Schauer.
+	* symfile.c (syms_from_objfile, symbol_file_add):  Allow a
+	symbol-file that has no linkage symbols to be read.
+	* tm-rs6000.h, xm-rs6000.h: (SIGWINCH_HANDLER and friends):  Move
+	from tm- file to xm-file, since they're host dependent.
+	* valarith.c (value_binop):  Typo.
+
+Mon Feb  1 16:16:59 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* sparclite/aload.c:  Add copyleft.
+	* sparclite/crt0.s:  Add comment at beginning.
+
+Mon Feb  1 14:36:11 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* remote-z8k.c, z8k-tdep.c: support for the Z8001 and Z8002.
+	* parse.c (std_regs): Only declare if NO_STD_REGS is defined.
+
+Sun Jan 31 04:32:48 1993  Michael Tiemann  (tiemann@rtl.cygnus.com)
+
+	* values.c (value_headof): Fix typo in which VTBL and ARG were
+	being confused for one another.
+
+	* valops.c (typecmp): Now static.
+
+	* gdbtypes.c (fill_in_vptr_fieldno): Don't ignore the first
+	baseclass--we don't always inherit its virtual function table
+	pointer.
+
+	* eval.c (evaluate_subexp): In OP_FUNCALL case, adjust `this'
+	pointer correctly in case value_struct_elt moves it around.
+
+	* valops.c (typecmp): Now static.  Also, now groks references
+	better.
+
+	* gdbtypes.c (lookup_struct_elt_type): Pass NOERR instead of
+	zero on recursive call.  If NAME is the name of TYPE, return TYPE.
+
+Sat Jan 30 19:55:52 1993  John Gilmore  (gnu@cygnus.com)
+
+	* hppah-nat.c:  Eliminate <sys/user.h> and other unnecessary stuff,
+	to avoid "too much defining" error from native C compiler (!).
+
+	* Makefile.in (HFILES):  Add typeprint.h.
+	* typeprint.[ch]:  Update copyrights.
+
+Thu Jan 28 19:09:02 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in:  Update to match doc/ subdir changes.
+
+	* config/hp300hpux.mh:  No cross-host file needed, just native.
+	* config/go32.mh:  Remove nonexistent "native" support.
+
+	M88K fixes reported by Carl Greco, <cgreco@Creighton.Edu>:
+	* tm-m88k.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
+	* m88k-tdep.c (next_insn):  Lint, cleanup.
+	(store_parm_word):  Lint.
+
+	* README:  Fix typo (reported by karl@hq.ileaf.com).
+
+Wed Jan 27 21:34:21 1993  Fred Fish  (fnf@cygnus.com)
+
+	* expression.h (BINOP_CONCAT): Document use for self concatenation
+	an integral number of times.
+	* language.c (binop_type_check):  Extend BINOP_CONCAT for self
+	concatenation case.
+	* valarith.c (value_concat):  Rewrite to support self
+	concatenation an integral number of times.
+	* Makefile.in (ch-exp.tab.c):  Change "expect" message.
+	* ch-exp.y (FIXME's):  Make all FIXME tokens distinct, to
+	eliminate hundreds of spurious shift/reduce and reduce/reduce
+	conflicts that mask the 5 real ones.
+	* ch-exp.y (STRING, CONSTANT, SC):  Remove unused tokens.
+	* ch-exp.y (integer_literal_expression):  Remove production,
+	no longer used.
+
+Thu Jan 21 09:58:36 1993  Fred Fish  (fnf@cygnus.com)
+
+	* eval.c (evaluate_subexp):  Fix OP_ARRAY, remove code that
+	implied that "no side effects" was nonfunctional.
+	* eval.c (evaluate_subexp):  Add BINOP_CONCAT case to deal with
+	character string and bitstring concatenation.
+	* expprint.c (dump_expression):  Add case for BINOP_CONCAT.
+	* expression.h (exp_opcode):  Add BINOP_CONCAT.
+	* gdbtypes.h (type_code):  Add TYPE_CODE_BITSTRING.
+	* language.c (string_type):  Add function to determine if a type
+	is a string type.
+	* language.c (binop_type_check):  Add case for BINOP_CONCAT.
+	* valarith.c (value_concat):  New function to concatenate two
+	values, such as character strings or bitstrings.
+	* valops.c (value_string):  Remove error stub and implement
+	function body.
+	* value.h (value_concat):  Add prototype.
+	* ch-exp.y (operand_3):  Add actions for SLASH_SLASH (//).
+	* ch-exp.y (yylex):  Recognize SLASH_SLASH.
+	* ch-lang.c (chill_op_print_tab):  Add SLASH_SLASH (//) as
+	BINOP_CONCAT.
+
+Tue Jan 19 14:26:15 1993  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (exp):  Add production to support direct creation
+	of array constants using the obvious syntax.
+	* c-valprint.c (c_val_print):  Set printed string length.
+	* dwarfread.c (read_tag_string_type):  New prototype and
+	function that handles TAG_string_type DIEs.
+	* dwarfread.c (process_dies):  Add case for TAG_string_type
+	that calls new read_tag_string_type function.
+	* expprint.c (print_subexp):  Add support for OP_ARRAY.
+	* gdbtypes.c (create_range_type, create_array_type):  Inherit
+	objfile from the index type.
+	* ch-typeprint.c (chill_print_type):  Add case for
+	TYPE_CODE_STRING.
+	* ch-valprint.c (chill_val_print):  Fix case for
+	TYPE_CODE_STRING.
+
+Mon Jan 18 11:58:45 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mipsread.c (CODE_MASK, MIPS_IS_STAB, MIPS_MARK_STAB,
+	MIPS_UNMARK_STAB, STABS_SYMBOLS): Removed; now in
+	include/coff/mips.h.
+
+Fri Jan 15 20:26:50 1993  Fred Fish  (fnf@cygnus.com)
+
+	* c-exp.y (exp:STRING):  Convert C strings into array-of-char
+	constants with an explicit null byte terminator.  OP_STRING is
+	now used for real string types.
+	* c-lang.c (builtin_type_*):  Move declarations to lang.c since
+	they are used by all languages.
+	* c-lang.c (_initialize_c_language):  Move initializations of 
+	builtin_type_* to lang.c.
+	* c-typeprint.c (c_type_print_varspec_prefix,
+	c_type_print_varspec_suffix):  TYPE_CODE_PASCAL_ARRAY renamed
+	to TYPE_CODE_STRING.
+	* c-valprint.c (c_val_print):  Change the way character arrays
+	are printed as strings to be consistent with the way strings
+	are printed when pointer-to-char types are dereferenced.
+	Remove test of print_max before calling val_print_string, which
+	now does it's own test.
+	* eval.c (evaluate_subexp):  Add case for OP_ARRAY.
+	* expprint.c (print_subexp, dump_expression):  Add case for OP_ARRAY.
+	* expression.h (enum exp_opcode):  Add OP_ARRAY and document.
+	* gdbtypes.c (builtin_type_*):  Add declarations moved from
+	c-lang.c.
+	* gdbtypes.c (create_string_type):  New function to create real
+	string types.
+	* gdbtypes.c (recursive_dump_type):  TYPE_CODE_PASCAL_ARRAY
+	renamed to TYPE_CODE_STRING.
+	* gdbtypes.c (_initialize_gdbtypes):  Add initializations of
+	builtin_type_* types moved from c-lang.c.
+	* gdbtypes.h (enum type_code):  TYPE_CODE_PASCAL_ARRAY renamed
+	to TYPE_CODE_STRING.
+	* gdbtypes.h (builtin_type_string):  Add extern declaration.
+	* gdbtypes.h (create_string_type):  Add prototype.
+	* m2-lang.c (m2_create_fundamental_type):  TYPE_CODE_PASCAL_ARRAY
+	renamed to TYPE_CODE_STRING.
+	* m88k-tdep.c (pushed_size):  TYPE_CODE_PASCAL_ARRAY renamed to
+	TYPE_CODE_STRING.
+	* mipsread.c (_initialize_mipsread):  TYPE_CODE_PASCAL_ARRAY
+	renamed to TYPE_CODE_STRING.
+	* parse.c (length_of_subexp, prefixify_subexp):  Add case for
+	OP_ARRAY.
+	* printcmd.c (print_formatted):  Recognize TYPE_CODE_STRING.
+	* typeprint.c (print_type_scalar):  TYPE_CODE_PASCAL_ARRAY renamed
+	to TYPE_CODE_STRING.
+	* valops.c (allocate_space_in_inferior):  New function and
+	prototype, using code ripped out of value_string.
+	* valops.c (value_string):  Rewritten to use new function
+	allocate_space_in_inferior, but temporarily disabled until some
+	other support is in place.
+	* valops.c (value_array):  New function to create array constants.
+	* valprint.c (val_print_string):  Add comment to document use, 
+	complete rewrite to fix several small buglets.
+	* value.h (value_array):  Add prototype.
+	* value.h (val_print_string):  Change prototype to match rewrite.
+	* ch-valprint.c (chill_val_print):  Add case for TYPE_CODE_STRING.
+	* ch-exp.y (match_character_literal):  Disable recognition of 
+	control sequence form of character literals and document why.
+
+Thu Jan 14 15:48:12 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* nindy-share/nindy.c:  Add comments to #endif's to clarify
+	grouping.
+
+	* hppa-pinsn.c (print_insn):  Use read_memory_integer, instead of
+	read_memory to get byte order right.
+	* hppah-tdep.c (find_unwind_info):  Don't read in unwind info
+	anymore.  This is done in paread.c now.  We expect unwind info
+	to hang off of objfiles, and search all of the objfiles when until
+	we find a match.
+	* (skip_trampoline_code):  Cast arg to target_read_memory.
+	* objfiles.h (struct objfile):  Add new field obj_private to hold
+	per object file private data (unwind info in this case).
+	* paread.c (read_unwind_info):  New routine to read unwind info
+	for the objfile.  This data is hung off of obj_private.
+	* tm-hppa.h:  Define struct obj_unwind_info, to hold pointers to
+	the unwind info for this objfile.  Also define OBJ_UNWIND_INFO to
+	make this easier to access.
+
+Wed Jan 13 20:49:59 1993  Fred Fish  (fnf@cygnus.com)
+
+	* c-valprint.c (cp_print_class_member):  Add extern decl.
+	* c-valprint.c (c_val_print):  Extract code for printing methods
+	and move it to cp_print_class_method in cp-valprint.c.
+	* c-valprint.c (c_val_print):  Extract code to print strings and
+	move it to val_print_string in valprint.c.
+	* cp-valprint.c (cp_print_class_method):  New function using
+	code extracted from c_val_print.
+	* valprint.c (val_print_string):  New function using code
+	extracted from c_val_print.
+	* value.h (val_print_string):  Add prototype.
+	* ch-exp.y (CHARACTER_STRING_LITERAL):  Set correct token type.
+	* ch-exp.y (literal):  Add action for CHARACTER_STRING_LITERAL.
+	* ch-exp.y (tempbuf, tempbufsize, tempbufindex, GROWBY_MIN_SIZE,
+	CHECKBUF, growbuf_by_size):  New variables, macros, and support
+	functions for implementing a dynamically expandable temp buffer.
+	* ch-exp.y (match_string_literal):  New lexer function.
+	* ch-exp.y (match_bitstring_literal):  Dynamic buffer code
+	removed and replaced with new CHECKBUF macro.
+	* ch-exp.y (yylex):  Call match_string_literal when appropriate.
+	* ch-valprint.c (ch_val_print):  Add code for TYPE_CODE_PTR.
+
+Sat Jan  9 19:59:33 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* Makefile.in:  Add info for paread.o.
+	* config/hppahpux.mh:  Add paread.o to NATDEPFILES.
+
+	* blockframe.c (frameless_look_for_prologue):  Correct the
+	comment.
+	* gdbtypes.h, gdbtypes.c:  Use const in decl of
+	cplus_struct_default, now that pa-gas assembler has been fixed.
+	* hppah-nat.c:  Formatting.
+	* hppah-tdep.c:  Remove lots of useless externs for variables we
+	don't use.
+	* (find_unwind_entry):  Speed up by using binary search, and a one
+	entry cache.
+	* (rp_saved):  New routine to see what unwind info says about RP
+	being saved on the stack frame.
+	* (frame_saved_pc):  Look for prologue to see if we need to
+	examine the stack for the saved RP or not.
+	* (init_extra_frame_info):  Check for prologue, instead of
+	framesize to determine if we are frameless or not.
+	* (frame_chain_valid):  Stop backtraces when we run into _start.
+	* (push_dummy_frame):  Reformat to make more readable.
+	* (find_dummy_frame_regs):  ditto.
+	* (hp_pop_frame):  ditto.
+	* (hp_restore_pc_queue):  small cleanup.
+	* (hp_push_arguments):  ditto.
+	* (pa_do_registers_info):  ditto.
+	* (skip_prologue):  New routine created from SKIP_PROLOGUE macro.
+	* tm-hppa.h:  Move contents of SKIP_PROLOGUE into hppah-tdep.c.
+	* Define FRAME_CHAIN_VALID.
+	* Turn on BELIEVE_PCC_PROMOTION so that we can access char args
+	passed to functions.
+
+	* paread.c (pa_symtab_read):  Use new bfd conventions for
+	accessing linker symbol table.
+	* (pa_symfile_init):  Access embedded STAB info via BFD section
+	mechanism and related macros.
+
+
+Sat Jan  9 19:31:43 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c:  Use a seperate stack for our traps.
+	* Handle recursive traps.
+	* Remove all trap init code.  This needs to be done by the
+	environment.
+	* (set_mem_fault_trap):  Call exceptionHandler() to setup this
+	trap.
+	* (handle_exception):  See if we are at breakinst, if so, then
+	advance PC sp that users can just step out of breakpoint().
+	* (case 'G'):  Don't let GDB hack CWP.  Also, copy saved regs to
+	new place if SP has changed.
+	* (case 's'):  Get rid of this, we can't do it yet.
+	* (case 't'):  New command to test any old random feature.
+	* (case 'r'):  New command to reset the system.
+	* (breakpoint):  Add label to breakpoint trap instruction so that
+	handle_exception() can detect where we are and get past the
+	breakpoint trivially.
+
+Thu Jan  7 13:33:06 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* mips-pinsn.c: Actual work now done by opcodes/mips-dis.c.
+
+Thu Jan  7 09:21:51 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* configure.in: recognise all sparclite variants
+
+Wed Jan  6 10:14:51 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* symfile.c: If O_BINARY isn't defined, set it to 0, call openp for
+	binary files oring in the right bit.
+
+	* main.c, source.c, state.c, symmisc.c: use macros defined in
+	fopen-{bin|both} when fopening files.
+
+Wed Jan  6 08:19:11 1993  Fred Fish  (fnf@cygnus.com)
+
+	* defs.h (HOST_CHAR_BIT):  New macro, defaults to either CHAR_BIT
+	from a configuration file (typically including <limits.h>), or to
+	TARGET_CHAR_BIT if CHAR_BIT is not defined.
+	* eval.c (evaluate_subexp):  Use new BYTES_TO_EXP_ELEM macro.
+	* eval.c (evaluate_subexp):  Add case for OP_BITSTRING.
+	* expprint.c (print_subexp):  Use new BYTES_TO_EXP_ELEM macro.
+	* exppritn.c (print_subexp, dump_expression):  Add case for
+	OP_BITSTRING.
+	* expression.h (OP_BITSTRING):  New expression element type for
+	packed bitstrings.
+	* expression.h (EXP_ELEM_TO_BYTES, BYTES_TO_EXP_ELEM):  New
+	macros to convert between number of expression elements and bytes
+	to store that many elements.
+	* i960-tdep.c (leafproc_return):  Use new macros to access
+	minimal symbol name and address fields.
+	* m88k-pinsn.c (sprint_address):  Use new macros to access
+	minimal symbol name and address fields.
+	* nindy-tdep.c (nindy_frame_chain_valid):  Use new macro to access
+	minimal symbol address field.
+	* parse.c (write_exp_elt, write_exp_string, prefixify_expression,
+	parse_exp_1):  Use new EXP_ELEM_TO_BYTES macro.
+	* parse.c (write_exp_string, length_of_subexp, prefixify_expression):
+	Use new BYTES_TO_EXP_ELEM macro.
+	* parse.c (write_exp_bitstring):  New function to write packed
+	bitstrings into the expression element vector.
+	* parse.c (length_of_subexp, prefixify_subexp):  Add case for
+	OP_BITSTRING.
+	* parser-defs.h (struct stoken):  Document that it is used for
+	OP_BITSTRING as well as OP_STRING.
+	* parser-defs.h (write_exp_bitstring):  Add prototype.
+	* ch-exp.y (BIT_STRING_LITERAL):  Change token type to sval.
+	* ch-exp.y (NUM, PRED, SUCC, ABS, CARD, MAX, MIN, SIZE, UPPER,
+	LOWER, LENGTH):  New tokens for keywords.
+	* ch-exp.y (chill_value_built_in_routine_call, mode_argument, 
+	upper_lower_argument, length_argument, array_mode_name,
+	string_mode_name, variant_structure_mode_name):  New non-terminals
+	and productions.
+	* ch-exp.y (literal):  Useful production for BIT_STRING_LITERAL.
+	* ch-exp.y (match_bitstring_literal):  New lexer support function
+	to recognize bitstring literals.
+	* ch-exp.y (tokentab6):  New token table for 6 character keywords.
+	* ch-exp.y (tokentab5):  Add LOWER, UPPER.
+	* ch-exp.y (tokentab4):  Add PRED, SUCC, CARD, SIZE.
+	* ch-exp.y (tokentab3):  Add NUM, ABS, MIN, MAX.
+	* ch-exp.y (yylex):  Check tokentab6.
+	* ch-exp.y (yylex):  Call match_bitstring_literal.
+
+Mon Jan  4 16:54:18 1993  Fred Fish  (fnf@cygnus.com)
+
+	* xcoffexec.c (vmap_symtab):  Use new macros to access minimal
+	symbol name and value fields.
+
+	* c-exp.y (yylex):  Make static, to match prototype and other
+	<lang>-exp.y files.
+
+	* expression.h (exp_opcode):  Add BINOP_MOD.
+	* eval.c (evaluate_subexp):  Handle new BINOP_MOD.
+	* expprint.c (dump_expression):  Handle new BINOP_MOD.
+	* language.c (binop_type_check):  Handle new BINOP_MOD.
+	* main.c (float_handler):  Re-enable float handler when hit.
+	* valarith.c (language.h):  Include, need current_language.
+	* valarith.c (TRUNCATION_TOWARDS_ZERO):  Define default macro
+	for integer divide truncates towards zero for negative results.
+	* valarith.c (value_x_binop):  Handle BINOP_MOD if seen.
+	* valarith.c (value_binop):  Allow arithmetic operations on
+	TYPE_CODE_CHAR variables.  Add case to handle new BINOP_MOD.
+	* ch-exp.y (operand_4):  Add useful actions for MOD and REM.
+	* ch-exp.y (tokentab3):  Add MOD and REM.
+	* ch-exp.y (yylex):  Set innermost_block for symbols found
+	in local scopes.  Return LOCATION_NAME for local symbols.
+	* ch-lang.c (chill_op_print_tab):  Fix MOD entry to use
+	BINOP_MOD instead of BINOP_REM.  Add REM entry, using BINOP_REM.
+
+Mon Jan  4 07:35:31 1993  Steve Chamberlain  (sac@wahini.cygnus.com)
+
+	* command.c (shell_escape, make_command, _initialize_command):
+	don't create or use fork if CANT_FORK is defined.
+	* serial.h, ser-go32.c: now compiles, but "the obvious problems of
+	code written for the IBM PC" remain.
+	* xm-go32.h: define CANT_FORK
+
+Sun Jan  3 14:24:56 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
+
+	* remote-sim.c: first attempt at general simulator interface
+	* remote-hms.c: whitespace
+	* h8300-tdep.c: (h8300_skip_prologue, examine_prologue):
+	understand new stack layout. (print_register_hook): print ccr
+	register in a fancy way.
+
+Sun Jan  3 14:16:10 1993  Fred Fish  (fnf@cygnus.com)
+
+	* eval.c (language.h): Include.
+	* eval.c (evaluate_subexp_with_coercion):  Only coerce arrays
+	to pointer types when the current language is C.  It loses for
+	other languages when the lower index bound is nonzero.
+	* valarith.c (value_subscript):  Take array lower bounds into
+	account when performing subscripting operations.
+	* valops.c (value_coerce_array):  Add comment describing why
+	arrays with nonzero lower bounds are dealt with in value_subscript,
+	rather than in value_coerce_array.
+
+Sat Jan  2 12:16:41 1993  Fred Fish  (fnf@cygnus.com)
+
+	* ch-exp.y (FLOAT_LITERAL):  Add token.
+	* ch-exp.y (literal):  Add FLOAT_LITERAL.
+	* ch-exp.y (match_float_literal):  New lexer routine.
+	* ch-exp.y (convert_float):  Remove.
+	* ch-exp.y (yylex):  Call match_float_literal.
+	* ch-exp.y (yylex):  Match single '.' after trying
+	to match floating point literals.
+
+	* eval.c (evaluate_subexp):  Add case MULTI_SUBSCRIPT.
+	* expprint.c (print_subexp):  Rename BINOP_MULTI_SUBSCRIPT to
+	MULTI_SUBSCRIPT.
+	* expprint.c (dump_expression):  New function for dumping
+	expression vectors during gdb debugging.
+	* expression.h (BINOP_MULTI_SUBSCRIPT):  Name changed to
+	MULTI_SUBSCRIPT and moved out of BINOP range.
+	* expression.h (DUMP_EXPRESSION):  New macro that calls
+	dump_expression if DEBUG_EXPRESSIONS is defined.
+	* m2-exp.y (BINOP_MULTI_SUBSCRIPT):  Changed to MULTI_SUBSCRIPT.
+	* parse.c (length_of_subexp, prefixify_subexp):  Change
+	BINOP_MULTI_SUBSCRIPT to MULTI_SUBSCRIPT.
+	* parse.c (parse_exp_1):  Call DUMP_EXPRESSION before and after
+	prefixify'ing the expression.
+	* printcmd.c (print_command_1):  Add comment.
+	* ch-exp.y (expression_list):  Add useful actions.
+	* ch-exp.y (value_array_element):  Add useful actions.
+	* ch-exp.y (array_primitive_value):  Add production.
+	* ch-exp.y (yylex):  Recognize ',' as a token.
+
+Fri Jan  1 18:22:02 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* Makefile.in: pass prefix and exec_prefix via FLAGS_TO_PASS,
+	POSIXize the recursive makes (make [variable assignments] target{s})
+
+Fri Jan  1 11:56:23 1993  Fred Fish  (fnf@cygnus.com)
+
+	* tm-sun4sol2.h (CPLUS_MARKER):  Remove, now set in tm-sysv4.h.
+	* tm-sysv4.h (CPLUS_MARKER):  By default, g++ uses '.' as the
+	CPLUS_MARKER for all SVR4 systems, so follow suit.
+	* defs.h (strdup_demangled):  Remove prototype.
+	* dwarfread.c (enum_type, synthesize_typedef):  Use new macro
+	SYMBOL_INIT_LANGUAGE_SPECIFIC.
+	* dwarfread.c (new_symbol):  Use SYMBOL_INIT_DEMANGLED_NAME.
+	* minsyms.c (install_minimal_symbols, prim_record_minimal_symbol,
+	prim_record_minimal_symbol_and_info):  Use new macro
+	SYMBOL_INIT_LANGUAGE_SPECIFIC.
+	* minsyms.c (install_minimal_symbols):  Use new macro
+	SYMBOL_INIT_DEMANGLED_NAME.
+	* stabsread.c (define_symbol):  Use new macro
+	SYMBOL_INIT_DEMANGLED_NAME.
+	* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+	Use new macro SYMBOL_INIT_DEMANGLED_NAME.
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST):  Use new macro
+	SYMBOL_INIT_DEMANGLED_NAME.
+	* symmisc.c (dump_msymbols, dump_symtab, print_partial_symbol):
+	SYMBOL_DEMANGLED_NAME now tests language itself.
+	* symtab.c (COMPLETION_LIST_ADD_SYMBOL):  SYMBOL_DEMANGLED_NAME
+	now tests language itself.
+	* symtab.h (SYMBOL_CPLUS_DEMANGLED_NAME):  New macro that does
+	what SYMBOL_DEMANGLED_NAME used to do, directly access the C++
+	mangled name member in the language dependent portion of a symbol.
+	* symtab.h (SYMBOL_DEMANGLED_NAME):  New macro that returns the
+	mangled name member appropriate for a symbol's language.
+	* symtab.h (SYMBOL_SOURCE_NAME, SYMBOL_LINKAGE_NAME,
+	SYMBOL_MATCHES_NAME, SYMBOL_MATCHES_REGEXP):
+	SYMBOL_DEMANGLED_NAME now tests language itself.
+	* symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC):  New macro that
+	initializes language dependent portion of symbol.
+	* symtab.h (SYMBOL_INIT_DEMANGLED_NAME):  New macro that
+	demangles and caches the demangled form of symbol names.
+	* utils.c (fputs_demangled, fprint_symbol):  Use current language
+	to select an appropriate demangling algorithm.
+	* utils.c (strdup_demangled):  Remove, no longer used.
+	* symtab.h (SYMBOL_CHILL_DEMANGLED_NAME):  New macro that directly
+	access the Chill mangled name member in the language dependent
+	portion of a symbol.
+	* ch-lang.c (chill_demangle):  New function, simple demangler.
+	* defs.h (chill_demangle):  Add prototype.
+	* symtab.h (language_dependent_info):  Add struct for Chill.	
+
+For older changes see ChangeLog-92
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-94 b/gdb/ChangeLog-94
new file mode 100644
index 0000000..a691ace
--- /dev/null
+++ b/gdb/ChangeLog-94
@@ -0,0 +1,5705 @@
+Fri Dec 30 17:58:55 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* config/m68k/tm-est.h:  Remove cruft.
+
+
+Thu Dec 29 22:40:00 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Allow up to 10 whitespace separated arguments to user defined
+	commands.
+	* top.c (struct user_args): Structure for holding arguments to
+	user defined commands.
+	(print_command_line): Delete unused "tmp_chain" variable.  Clean
+	up flow control by having cases exit in the same manner.
+	Before executing a command or evaluating an expression, substitute
+	the current $arg0..$arg9 values if the command/expression uses them.
+	(arg_cleanup): New function.
+	(setup_user_args, locate_arg, insert_args): Likewise.
+	(execute_user_command): Allow arguments to user defined commands.
+
+	* Allow if/while commands to be used within a breakpoint command
+	list.
+	* breakpoint.c (bpstat_do_actions): Call execute_control_command
+	rather than execute_command (passes entire command structure rather
+	than just the command line text).
+	(breakpoint_1): Use "print_command_line" to print a breakpoint
+	command line (including control structures).
+	* gdbcmd.h (execute_control_command): Provide extern decl.
+	(print_command_line): Likewise.
+	* top.c (execute_control_command): No longer static.
+	(print_command_line): New function to recursively print a command
+	line, including control structures.
+
+Thu Dec 29 18:18:31 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* hppa-tdep.c (pa_print_registers): Extract register values stored
+	in big endian format on big and little endian hosts.
+
+	* array-rom.c: Support for Array Tech LSI33k based RAID disk
+	controller board.
+	* configure.in: Recognize "mips*-*-ecoff*" rather than
+	"mips*-idt-ecoff*" so it'll work for the LSI33k.
+
+	* monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support
+	to monitor config structure for supported baud rates for a target
+	and variable stop bits.
+	* monitor.c (monitor_fetch_register): Store register values in big
+	endian format on any host.
+
+Wed Dec 28 19:27:22 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Prefer import stubs over
+	export stubs and actual shared library functions so that lazy
+	binding works correctly.  Try both __d_plt_call and __gcc_plt_call
+	trampolines for calling import stubs.
+
+Wed Dec 28 15:29:02 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* a29k-tdep.c (pop_frame): Fix a variable name.
+
+Wed Dec 28 12:21:39 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (push_dummy_frame): Refine code to determine what
+	space ID to place in the stack & inf_status structure.
+	(hppa_pop_frame): Don't walk through trampoline code if popping a
+	call dummy frame.
+	(hppa_fix_call_dummy): Call the stack dummy directly if the
+	current PC is in a shared library.
+
+	* hppa-tdep.c (push_dummy_frame): Return type is void.  Clear
+	in_syscall bit in flags.  Don't depend on the PC queue registers
+	when in_syscall is set, they're not valid.
+	* config/pa/tm-hppa.h (PUSH_DUMMY_FRAME): Pass inf_status down to
+	push_dummy_frame.
+	(SR4_REGNUM): Define.
+
+	* hppa-tdep.c: Misc. lint changes.
+
+Tue Dec 27 12:32:43 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.c (watchpoint_check): Don't bother restoring the
+	"selected" frame anymore, it's not necessary.  Initialize the
+	frame cache before trying to find the current frame in the frame
+	chain.
+
+	* somsolib.c (som_solib_add): Return without loading any shared
+	libraries if symfile_objfile is NULL.
+	(som_solib_create_inferior_hook): Likewise.
+
+Fri Dec 23 17:03:13 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote-est.c:  New file supports EST-300 CPU32 background 
+	mode ICE.
+	* remote-utils.c (sr_com):  Call registers_changed.
+	* configure.in (m68*-*-est*):  New configuration.
+	* config/m68k/tm-est.h:  New file.
+
+Fri Dec 23 16:18:50 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (CLIBS):  Put LIBIBERTY last.
+
+Thu Dec 22 09:27:16 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* ser-tcp.c (tcp_open): Cast to struct sockaddr when passing to
+	function which expects that.
+
+Thu Dec 22 13:25:33 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* nlm/gdbserve.c, nlm/ppc.c, nlm/ppc.h: Don't try to use
+	  ALTERNATE_MEM_FUNCS.
+
+Wed Dec 21 14:00:26 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c: Now supports xmodem as a remoteloadprotocol.
+
+Tue Dec 20 23:01:17 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* config/mips/xm-irix4.h, config/mips/xm-irix5.h:  #define
+	_BSD_COMPAT to get reliable signal handling.
+
+Tue Dec 20 11:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* sparc-tdep.c, a29k-tdep.c, findvar.c (get_saved_register):
+	if !target_has_registers, call error().
+
+	* value.h: Remove obsolete comments about FRAME vs struct
+	frame_info *.
+
+
+Sun Dec 18 11:52:58 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (sparc_pop_frame):  Remove erroneous extra argument
+	to write_register.
+
+Sat Dec 17 13:23:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* tm-sparc.c (EXTRA_FRAME_INFO): New field sp_offset.
+	* sparc-tdep.c (sparc_init_extra_frame_info): Set it.
+	(examine_prologue, sparc_init_extra_frame_info): Use ->frame plus
+	->sp_offset to compute the address something is saved at, not
+	->bottom.
+
+	* sparc-tdep.c (get_saved_register): New function.
+	* tm-sparc.h: Define GET_SAVED_REGISTER; don't define
+	FRAME_FIND_SAVED_REGS, HAVE_REGISTER_WINDOWS or REGISTER_IN_WINDOW_P.
+	* stack.c (frame_info): Add comment about what to do if
+	FRAME_FIND_SAVED_REGS is not defined.
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Set ->frame field
+	here.  Get it right for flat frames.
+	* sparc-tdep.c (sparc_frame_chain): Instead of returning
+	meaningful value for ->frame field, just return dummy value.
+	This change is needed because the old code didn't deal with mixed
+	flat and non-flat frames.
+
+	* sparc-tdep.c (sparc_pop_frame): Write SP_REGNUM from
+	frame->frame, don't go through saved regs for this.
+
+	* sparc-tdep.c: Move guts of skip_prologue to new function
+	examine_prologue.  Check for flat prologue and set is_flat.
+	Provide the caller with the information about what is saved where
+	if desired.
+	(skip_prologue, sparc_frame_find_saved_regs): Call examine_prologue.
+
+	* sparc-tdep.c: Replace union sparc_insn_layout and anonymous
+	union in isannulled, which won't work on a little-endian host,
+	with X_* macros.
+
+	* sparc-tdep.c (sparc_frame_saved_pc): If addr == 0, the saved PC
+	is still in %o7.
+
+	* config/sparc/tm-sparc.h: Define INIT_FRAME_PC and
+	INIT_FRAME_PC_FIRST.
+	* blockframe.c (get_prev_frame_info): Modify comments regarding
+	INIT_FRAME_PC_FIRST and the sparc.
+
+	* sparc-tdep.c (single_step): Use 4 not sizeof (long) for size of
+	instruction. 
+
+Sat Dec 17 02:33:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-typeprint.c (c_type_print_base):  Use `show' of -1 to print
+	the return type of methods to avoid infinite loops with anonymous
+	types.
+	* valops.c (search_struct_field):  Handle anonymous unions.
+
+	* sparc-tdep.c (sunos4_skip_trampoline_code):  New function
+	to correctly handle steps into -g compiled PIC objects in the
+	main executable.
+	* config/sparc/tm-sun4os4.h (SKIP_TRAMPOLINE_CODE):
+	Redefine to use sunos4_skip_trampoline_code.
+
+	* dwarfread.c (DWARF_REG_TO_REGNUM):  Provide a default mapping
+	from DWARF to GDB register numbering.
+	* dwarfread.c (locval):  Use DWARF_REG_TO_REGNUM to map the
+	register value.
+	* config/mips/tm-mipsv4.h (DWARF_REG_TO_REGNUM):  Define.
+
+Fri Dec 16 10:56:29 1994  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (uninstall): transform file names.
+
+Thu Dec 15 16:55:35 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* defs.h: Include progress.h.
+	(QUIT): Call PROGRESS.
+	* main.c (main): Call START_PROGRESS and END_PROGRESS, break
+	usage message into shorter strings.
+	* source.c:  Change long command help strings into concats of
+	shorter ones, for picky ANSI compilers.
+
+	* top.c (command_loop): For space usage display, show both
+        absolute size and the change from before command execution.
+
+Thu Dec 15 16:40:10 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, main.c (gdb_fputs), top.c: Add stream arg to
+	fputs_unfiltered_hook.
+	* defs.h, top.c, utils.c (error): Add error_hook.
+
+Tue Dec 13 15:15:33 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* breakpoint.c, infrun.c, printcmd.c: Change long command help
+        strings into concats of shorter ones, for picky ANSI compilers.
+
+Mon Dec 12 17:08:02 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Sparc flat register window support.
+	* sparc-tdep.c (sparc_insn_layout): New union, defines layout of
+        instructions symbolically (used to be local to skip_prologue).
+	(sparc_init_extra_frame_info): New function.
+	(sparc_frame_chain): Add flat cases throughout.
+	(skip_prologue): Add recognition of flat prologues.
+	(sparc_frame_find_saved_regs): Add flat cases.
+	(sparc_pop_frame): Ditto.
+	* config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): New slots.
+	(INIT_EXTRA_FRAME_INFO): Call sparc_init_extra_frame_info.
+	(PRINT_EXTRA_FRAME_INFO): Define.
+
+
+Mon Dec 12 13:06:59 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* f-lang.c: Remove duplicate declaration of
+	builtin_type_f_integer, and only include it in the f_builtin_types
+	once.
+
+	* somread.c (som_symfile_read): Just assign to objfile->obj_private,
+	not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
+	the HP compiler doesn't like.
+
+
+Fri Dec  9 15:50:05 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (remote_wait): Pass string instead of char to strcpy.
+
+Fri Dec  9 04:43:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/low-lynx.c (mywait): Remove debugging printf.
+
+Thu Dec  8 15:07:29 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* frame.h: Restore pre-Nov 3 comments about FRAME_FP with minor
+	changes.  They are correct, unlike the post-Nov 3 comment
+	(FRAME_FP doesn't have any machine-independent relationship with
+	FP_REGNUM or any other such notion of a "frame pointer").
+
+Wed Dec  7 14:50:54 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdbserver/remote-utils.c (write_ok): Write "OK", not "Ok", to
+	match stubs and protocol spec.
+	* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
+	when passing to function which expects that.
+
+	The following changes aren't quite enough to make things work with
+	LynxOS (apprently kernel problems).
+	* infrun.c (wait_for_inferior): When resuming new thread, pass pid
+	not -1 for remote case.
+	* thread.c (info_threads_command): Give error if !target_has_stack. 
+	* infrun.c (start_remote): Call init_thread_list.
+	* thread.c (info_threads_command): Don't call kill for remote
+	debugging target.
+	* target.c (normal_pid_to_str): Print "thread" not "process" for
+	remote.
+	* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
+	response, and `thread' part of 'T' response.
+	* gdbserver/*: If program exits, send packet to GDB before
+	exiting.  Handle termination with a signal the same as exiting
+	with an exitstatus.
+	* remote.c: Don't try to kill program after getting an 'X'
+	response.
+	* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
+
+Thu Dec  8 12:37:38 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* config/pa/tm-pro.h tm-hppap.h, hppapro.mt: Rename tm-hppap.h to
+	tm-pro.h.
+
+Wed Dec  7 18:22:59 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* source.c: Various cosmetic changes.
+	(forward_search_command): Handle very long source lines correctly.
+
+Wed Dec  7 13:21:47 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* hppa-tdep.c: Use GDB_TARGET_IS_PA_ELF so SOM target support will
+	stop being linked in.
+
+	* config/pa/tm-hppap.h: New file. Set GDB_TARGET_IS_PA_ELF,
+	otherwise it looks like BSD-ELF.
+
+Mon Dec  5 21:43:52 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* inftarg.c: include <sys/types.h> to get def of pid_t.
+
+Fri Dec  2 15:03:07 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* solib.c (auto_solib_add_at_startup): New global.
+	(solib_create_inferior_hook): Call solib_add only if
+	auto_solib_add_at_startup is nonzero.
+	(_initialize_solib): New command "set auto-solib-add".
+
+Fri Dec  2 12:52:04 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* parse.c (msymbol_addr_type):  Replaced by
+	lookup_pointer_type (builtin_type_void).
+
+	* printcmd.c (_initialize_printcmd):  Give examine_*_type
+	a name for `ptype $_'.
+
+Fri Dec  2 12:52:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_formatted): Call val_print_string directly,
+	rather than via value_print.
+
+Wed Nov 30 22:27:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (som_solib_get_got_by_pc): New function.
+	* somsolib.h (som_solib_get_got_by_pc): Add extern decl.
+	* hppa-tdep.c (hppa_fix_call_dummy): Handle case where FUN is the
+	function's export stub or real address in a shared library.
+
+Tue Nov 29 13:40:25 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/i386/nbsd.mh (REGEX, REGEX1): No longer define.
+
+	* configure.in (i[345]86-*-freebsd*): New configuration.
+	* config/i386/{fbsd.mh,fbsd.mt,nm-fbsd.h}: New files.
+
+Tue Nov 29 12:23:25 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* top.c (read_next_line): Pass annotation suffix "commands"
+	instead of "command", matches documentation.
+
+Mon Nov 28 14:53:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/a29k/tm-a29k.h (setup_arbitrary_frame): Replace
+	FRAME_ADDR with CORE_ADDR in prototype.
+
+	* top.c (command_line_input): If annotation suffix is NULL,
+	replace it with an empty string.
+	(read_next_line): Pass "command" as annotation suffix to
+	command_line_input.
+
+Mon Nov 28 11:03:14 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/rs6000/tm-rs6000.h (setpgrp): move defn from here...
+	* config/rs6000/xm-rs6000.h: ...to here.
+
+
+Fri Nov 25 21:26:02 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* tm-hppa.h (skip_trampoline_code): Add extern decl.
+	* hppa-tdep.c (hppa_pop_frame): Silently restart the inferior and
+	allow it to execute any return path trampoline code.  Stop the
+	inferior and give the user control when the trampoline has
+	finished executing.
+	(in_solib_call_trampoline): Handle export stubs which also perform
+	parameter relocations.
+	(in_solib_return_trampoline): Likewise.
+
+Fri Nov 25 13:37:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* coffread.c, symfile.h (coff_getfilename):  Make it static again.
+	* xcoffread.c (coff_getfilename):  Use a static copy from
+	coffread.c, modified for accessing the static xcoff strtbl.
+
+Fri Nov 25 00:51:05 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (in_solib_call_trampoline): Recognize calls through
+	_sr4export and $$dyncall as trampolines.  Likewise for long-call
+	stubs and parameter relocation stubs.
+	(in_solib_return_trampoline): Recognize a return trampoline for
+	return value relocation stubs.
+
+	* hpread.c: Include hp-symtab.h instead of hpux-symtab.h.
+	Various name changes to match those used by hp-symtab.h.
+
+Thu Nov 24 00:39:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* blockframe.c (find_pc_partial_function): Inhibit mst_trampoline
+	symbol special handling when INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK
+	is defined.
+	* infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Renamed from
+	IN_SOLIB_TRAMPOLINE.  All callers changed.
+	(IN_SOLIB_RETURN_TRAMPOLINE): Provide default definition.
+	(wait_for_inferior): Handle single stepping through trampolines on
+	return paths from shared libraries.
+	* config/pa/tm-hppa.h (IN_SOLIB_CALL_TRAMPOLINE): Use
+	in_solib_call_trampoline.
+	(IN_SOLIB_RETURN_TRAMPOLINE): Use in_solib_return_trampoline.
+	(INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK): Define.
+	* hppa-tdep.c (in_solib_call_trampoline): New function.
+	(in_solib_return_trampoline): New function.	
+
+Wed Nov 23 21:43:03 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* tm-h8300.h (REMOTE_BREAKPOINT): Define.
+	* h8300-tdep.c (h8300_pop_frame): Remove redundant call.
+
+	* remote-e7000.c (HARD_BREAKPOINTS): Reenable.
+	(BC_BREAKPOINTS): Disable.
+	* sh-tdep.c (print_insn): Cope with big and little endian machines.
+	* sh/sh.mt: Use libsim.a
+	* sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New
+	(BREAKPOINT): Changed to be byteorder independent.
+
+Tue Nov 22 19:13:39 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Maintenance commands to report time and space usage.
+	* main.c (display_time, display_space): New globals.
+	(main): Add argument --statistics to enable reporting, display
+	time and space after startup is done.
+	* maint.c (maintenance_time_display, maintenance_space_display):
+	New commands.
+	* top.c (command_loop): Display time and space after command
+	execution.
+
+	* top.c (pre_init_ui_hook): New global.
+	(gdb_init): If pre_init_ui_hook set, call before all other init.
+
+Tue Nov 22 10:25:59 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* a29k-tdep.c (examine_tag): Fix a bug in stack frame size.
+
+Sat Nov 19 03:10:51 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/i386sol2.mh:  Reenable core file support.
+
+	* symfile.c (deduce_language_from_filename):  Treat .c++ as a
+	C++ extension.
+
+	* valops.c (destructor_name_p):  Do not compare the template
+	part for template classes.
+
+Fri Nov 18 14:55:59 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h, infcmd.c (reg_names): Don't declare as constant.
+	* remote-mips.c (mips_open): Read and set the processor type.
+	* mips-tdep.c (mips_set_processor_type): Always return an int.
+
+Fri Nov 18 10:38:12 1994  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlm/alpha.c (strtol): Remove, it is provided by NetWare C library.
+	* nlm/gdbserve.def (strtol): Add to import list.
+	* nlm/fake_aio.c: Remove file, no longer used.
+
+	* Makefile.in (LD_FOR_TARGET, NLMCONV_FOR_TARGET): Remove.
+	* nlm/Makefile.in (gdbserve.O): Link with ${CC_FOR_TARGET}.
+	(LD_FOR_TARGET): Remove.
+
+Thu Nov 17 22:09:50 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.h, monitor.c, w89k-rom.c, op50n-rom.c, idp-rom.c: Add
+	support	for two variables used to control the load protocol and
+	conversion type.
+
+Thu Nov 17 17:51:12 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Support for different MIPS IDT processor models.
+	* mips-tdep.c (mips_processor_type, tmp_mips_processor_type,
+	mips_generic_reg_names, mips_r3041_reg_names,
+	mips_r3051_reg_names, mips_r3081_reg_names,
+	mips_processor_type_table): New	globals.
+	(mips_do_registers_info): Don't display register if name is empty.
+	(mips_set_processor_type_command): New command.
+	(mips_show_processor_type_command): New command.
+	(mips_set_processor_type): New function.
+	(mips_read_processor_type): New function.
+	* config/mips/tm-idt.h (DEFAULT_MIPS_TYPE): New macro.
+	* config/mips/tm-mips.h (DEFAULT_MIPS_TYPE): New macro.
+	(NUM_REGS): Increase to account for all CP0 registers.
+	(REGISTER_NAMES): Add empty names for CP0 registers.
+	(FIRST_EMBED_REGNUM, LAST_EMBED_REGNUM): Adjust.
+	(PRID_REGNUM): New macro.
+
+Wed Nov 16 16:41:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* README: Add warning about termcap in Ultrix and OSF/1.
+
+Wed Nov 16 15:28:29 1994  Rob Savoye  (rob@cygnus.com)
+
+
+	* hppa-tdep.c: Remove including sys/dir.h from a target file.
+
+Wed Nov 16 10:31:27 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/powerpc/gdbserve.mt (TDEPFILES): Remove fake_aio.o.
+
+	* nlm/gdbserve.c: Include <nwtypes.h> before other NetWare headers.
+	* nlm/ppc.c: Likewise. 
+
+	* nlm/ppc.c (strtol): Remove, it is provided by NetWare C Library.
+	(StopBell): New function (stubbed out).
+
+Wed Nov 16 00:12:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Handle shared library import
+	trampolines.
+
+Tue Nov 15 16:18:52 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y (yylex): Fix a bug in template scanning.
+
+Tue Nov 15 14:25:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* i386-stub.c, m68k-stub.c, sparc-stub.c, sparcl-stub.c: Mask out
+	the top bit returned by getDebugChar.
+
+Tue Nov 15 01:03:56 1994  Rob Savoye  (rob@slipknot.cygnus.com)
+
+	* op50-rom.c, w89k-rom.c, monitor.c: Modify to usr two variables
+	to set remote load type and protocol.
+	* rom68k-rom.c: Add to_stop in target_ops.
+
+
+Sat Nov 12 21:55:47 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c: Add TODO list.
+	(som_solib_add): Immediately return if $SHLIB_INFO$ sections does
+	not exist or has size zero.  Slightly simplify error handling.
+	Keep an internal list of all the loaded shared libraries and
+	various tidbits of information about the loaded shared libraries.
+	Build section tables for each loaded shared library and add those
+	tables to the core target if necessary.
+	(som_solib_create_inferior_hook): Force re-reading of shared
+	libraries at exec time.
+	(som_sharedlibrary_info_command): New function for dumping
+	information about the currently loaded shared libraries.
+	(_initialize_som_solib): New function.
+
+Sat Nov 12 02:26:50 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* Makefile.in (copying.o, f-exp.tab.o, dpx2-nat.o, dstread.o,
+	i386aix-nat.o, i386m3-nat.o, irix5-nat.o, lynx-nat.o, m3-nat.o,
+	mipsm3-nat.o, ns32km3-nat.o, remote-e7000.o, remote-os9k.o):
+	Add dependencies.
+	(copying.o, os9kread.o, remote.o):  Update dependencies.
+
+	* valarith.c (value_sub):  When subtracting pointers, only
+	check for a match of the pointed to element lengths.
+	Cast element length to LONGEST to obtain a signed result for
+	pointer subtractions.
+
+Fri Nov 11 10:51:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* ch-exp.y (yylex): Fix off-by-one error when converting string to
+	lowercase.  Null terminate new string.
+
+	* hppa-tdep.c (rp_saved): Handle IMPORT stubs too.
+
+	* somsolib.c (som_solib_add): Check the value of __dld_flags, if
+	it indicates __dld_list is not valid return an error.  If it
+	indicates that libraries were not mapped privately, issue a
+	warning.
+
+Thu Nov 10 23:17:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symfile.c (syms_from_objfile): Only call find_lowest_section if
+	no ".text" section exists.
+
+Thu Nov 10 15:16:21 1994  Rob Savoye  <rob@rtl.cygnus.com>
+
+	* rom68k-rom.c: New file. Replaces the old remote-mon.c and uses
+	the new generic ROM interface in monitor.c.
+	* config/m68k/monitor.mt: Use new ROM support.
+	* monitor.c: Add support for xmodem download protocol.
+
+Wed Nov  9 18:46:24 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* findvar.c (find_saved_register): Fix a frame variable name.
+	* infcmd.c (finish_command): Ditto.
+
+Tue Nov  8 13:20:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove "Watchpoints seem not entirely reliable, though
+	they haven't failed me recently." item--this old (4.6 at least)
+	item is too vague to be useful (some watchpoint bugs have been
+	fixed since then).
+	* TODO: Add explanation of "RPC interface" item.
+
+Mon Nov  7 22:25:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): Use "text_offset" for linker
+	stub unwind descriptors too.
+
+	* Enable backtracing from inside a SOM shared library back into
+	user code.
+	* hppa-tdep.c (internalize_unwinds): Accept and use new
+	"text_offset" argument for dynamic relocation of
+	region_{start,end} fields in the unwind descriptor.
+	(read_unwind_info): Pass text_offset to internalize unwinds.
+
+Mon Nov  7 14:34:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m3-nat.c: Remove comments about arbitrary limit in
+	printf_filtered; that limit is gone.
+
+Mon Nov  7 00:27:16 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Beginnings of SOM shared library support.  Breakpoints and
+	single frame backtracing within the library only.  Only works when
+	using the HPUX 9 dynamic linker.  More functionality to be added
+	soon.
+
+	* somsolib.c, somsolib.h: New files.
+	* Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h
+	(ALLDEPFILES): Add somsolib.c.
+	(somsolib.o): Add some dependencies.
+	* somread.c (som_symtab_read): Accept multiple section offsets.
+	All callers changed.  Adjust all text symbols with the first
+	section offset.
+	* symfile.c (find_lowest_section): Enable this function.  Add some
+	tie-breaking logic when sections have the same vma.
+	(syms_from_objfile): Use find_lowest_section rather than looking
+	for ".text" by name.  Relax warning to only warn if the lowest
+	section is not a code section.
+	* config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o
+	* config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h.
+	
+Sun Nov  6 12:54:54 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* partial-stab.h (N_TEXT): Put back GDB_TARGET_IS_HPPA kludge,
+	it is still needed for GCC-2.6 compiled code.
+	* TODO (GDB_TARGET_IS_HPPA): Note this kludge can be nuked
+	sometime after GCC-2.7 has been released.
+
+	* hppa-tdep.c (frame_saved_pc): Mask off low two bits when
+	retrieving the PC from a signal handler caller.  Fix thinko
+	in Stan's last change ("frame", should have been "frame->next").
+	If the next frame is a signal handler caller and it's a system
+	call which has entered the kernel ((PSW & 0x2) != 0), then the
+	saved pc is in %r2 instead of %r31.
+	
+Fri Nov  4 23:47:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_frame_find_saved_regs): Change "frame" to
+	"frame_info" throughout.
+
+Fri Nov  4 16:26:59 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* sparcl-stub.c: get rid of defs.h.
+
+Fri Nov  4 13:11:54 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdbserver/Makefile.in (MMALLOC_CFLAGS): Add -I${MMALLOC_DIR}.
+	Correct definition of MMALLOC_DIR to reflect fact this is
+	gdb/gdbserver/Makefile.in, not gdb/Makefile.in.
+
+	* gdbserver/server.c (main): After we kill the inferior in
+	response to a 'k' request, exit.
+
+	* remote.c (remote_kill): Use catch_errors when calling putpkt.
+	(putpkt): Return int, not void, to match catch_errors calling
+	convention.
+
+Fri Nov  4 10:52:38 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* rs6000-tdep.c (pop_frame): Correct a variable name.
+
+Fri Nov  4 05:43:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Re-write item about SIGINT handling to reflect the fact
+	that target_stop now exists.
+
+Thu Nov  3 15:19:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Replace useless FRAME, FRAME_ADDR types with struct frame_info *
+	and CORE_ADDR, respectively.
+	* frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove.
+	* blockframe.c (get_frame_info): Remove.
+	* a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c,
+	breakpoint.h, energize.c, findvar.c, gould-pinsn.c,
+	h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c,
+	infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c,
+	mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c,
+	sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c,
+	config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
+	config/gould/tm-pn.h, config/h8300/tm-h8300.h,
+	config/h8500/tm-h8500.h, config/mips/tm-mips.h,
+	config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
+	config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with
+	struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR,
+	rename variables consistently (using `frame' or `fi'), remove
+	calls to get_frame_info and FRAME_INFO_ID, remove comments about
+	FRAME and FRAME_ADDR cruftiness.
+
+Thu Nov  3 14:25:24 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c,
+	remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c,
+	remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c,
+	remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c,
+	remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c,
+	w89k-rom.c, target.c, target.h:  Add support for target_stop().
+
+Thu Nov  3 01:23:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* osfsolib.c (solib_map_sections, first_link_map_member,
+	next_link_map_member, xfer_link_map_member):  Retrieve and use
+	shared library relocation offset from runtime loader structures.
+	Use libxproc.a routines to get a working version if
+	USE_LDR_ROUTINES is defined.
+	* README:  Remove item about shared library relocation for
+	Alpha OSF/1.
+
+Wed Nov  2 15:05:39 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y (yylex): scan template names, and scan nested class
+	names.
+
+Wed Nov  2 11:01:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/Makefile.in: install gdbserve.nlm.
+
+
+Tue Nov  1 13:00:46 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-valprint.c (c_value_print):  Check for plain literal `char'
+	target type when suppressing `(char *)' output for strings.
+
+Mon Oct 31 19:19:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coffread.c (coff_symfile_init): Remove unused local abfd.
+	* utils.c [NO_MMALLOC] (mmalloc, mrealloc): Define and use size_t
+	instead of long, for compatibility with mmalloc.h.
+
+Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* top.c (line_completion_function):  Renamed from
+	symbol_completion_function, takes the line buffer and the
+	point in the line buffer as additional arguments.
+	(readline_line_completion_function):  New function, interface
+	between readline and line_completion_function.
+	(init_main):  Use it.
+	(complete_command):  Use line_completion_function instead of
+	abusing rl_line_buffer. Free completion strings after printing
+	them.
+	* symtab.c (completion_list_add_name):  Recheck for duplicates
+	if we intend to add a modified symbol.
+
+	* gdbtypes.h (cplus_struct_type):  nfn_fields_total no longer
+	includes the number of methods from the baseclasses.
+	* stabsread.c (attach_fn_fields_to_type):  No longer add the
+	number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
+	the baseclass type might not have been completely filled in yet.
+	* symtab.c (total_number_of_methods):  New function to compute
+	the total number of methods for a type, including the methods
+	from baseclasses.
+	(decode_line_1):  Use it instead of TYPE_NFN_FIELDS_TOTAL to
+	allocate the symbol array for find_methods.
+
+	* stabsread.c (scan_file_globals):  Add default case to minimal
+	symbol type switch, to avoid gcc -Wall warnings.
+
+	* config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
+	Don't test for zero backchain pointer to recognize a signal
+	handler frame, if read() gets interrupted by a signal, the
+	backchain will be non zero.
+	(SIG_FRAME_FP_OFFSET):  Move to here from rs6000-tdep.c,
+	improve comment.
+	(SIG_FRAME_PC_OFFSET):  New definition.
+	(FRAME_SAVED_PC):  Return saved pc from sigcontext if this
+	is a signal handler frame.
+	* rs6000-tdep.c (function_frame_info):  Do not error out
+	if we can't access the instructions.
+
+	* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
+	New definition to get the function address from a function pointer.
+	* valops.c (find_function_addr):  Use it when calling a user
+	function through a function pointer.
+
+Fri Oct 28 16:16:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (MMALLOC_DIR): New definition.
+	(MMALLOC): Use MMALLOC_DIR.
+	(MMALLOC_CFLAGS): Look in MMALLOC_DIR for mmalloc.h.
+	(OPCODES): Remove gratuitous "./".
+	* defs.h (mmalloc.h): Include.
+	(mmalloc, mrealloc, etc): Remove decls.
+	(cplus_demangle, cplus_demangle_opname): Remove decls.
+
+Wed Oct 26 15:41:07 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, main.c, top.c:  Change sense and name of
+	no_windows variable.  Now called use_windows, and defaults to off
+	(for compatibility).
+
+Wed Oct 26 12:20:53 1994  Jim Kingdon  <kingdon@cygnus.com>
+
+	* coffread.c (coff_symtab_read): If we get the address from
+	target_lookup_symbol, set the section to -2 not SECT_OFF_BSS.
+	(coff_symtab_read): Set value and section of symbol that
+	process_coff_symbol returns.
+
+Tue Oct 25 09:53:04 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/i386/tm-nbsd.h: Enable longjmp support.
+
+Sat Oct 22 03:41:13 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valarith.c (value_binop):  Take care of ANSI `value preserving'
+	rule, which was not addressed by the previous change.
+
+	* rs6000-tdep.c (skip_prologue):  Handle `mr r31,r1', which is
+	generated by gcc-2.6, as a synonym for `oril r31,r1,0'.
+
+	* TODO:  Remove item about RS/6000 shared libraries.
+
+Thu Oct 20 17:35:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, infrun.c (wait_for_inferior), top.c:  Call
+	target_wait_hook to allow GUI to handle blocking for inferior.  Call
+	call_command_hook in execute_command to provide means for wrapping
+	commands with GUI state change updates.
+
+	* infrun.c (wait_for_inferior):  Make sure
+	through_sigtramp_breakpoint is non-null before deleting.
+
+Thu Oct 20 10:26:43 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/powerpc/ppc-nw.mt (TDEPFILES): Removed exec.o.
+
+Thu Oct 20 06:56:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (coffread.o): Depend on target.h.
+	(remote-vx.o): Depend on gdb-stabs.h objfiles.h symfile.h $(bfd_h).
+
+Wed Oct 19 22:49:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Fix typo.
+
+Wed Oct 19 11:32:15 1994  Jim Kingdon  <kingdon@cygnus.com>
+
+	* objfiles.c (objfile_relocate): When relocating ->sections, use
+	objfile not symfile_objfile.
+
+	* symtab.h, minsyms.c (minsyms_sort): New function.
+	* objfiles.c (objfile_relocate): Call it.
+
+	* remote-vx.c (vx_add_symbols): Call breakpoint_re_set.
+
+	* objfiles.c, objfiles.h (objfile_to_front): New function.
+	* remote-vx.c (vx_add_symbols): Call it.
+
+	* coffread.c (coff_symtab_read): Handle common symbols the same
+	way that partial-stab.h does.
+
+Wed Oct 19 21:06:12 1994  Rob Savoye  (rob@cirdan.cygnus.com)
+
+	* hppa-tdep.c: Remove include files a.out.h, ioctl.h, and
+	machine/psl.h. These are host files.
+
+Wed Oct 19 15:13:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* objfiles.h (struct objfile): Fix comment--minimal_symbol_count
+	does *not* include the terminating NULL msymbol.
+
+Tue Oct 18 20:53:29 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c (monitor_load_srec,monitor_make_srec): Add an asrecord
+	loader that reads files using BFD and converts it on the fly.
+
+Mon Oct 17 18:52:06 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c (set_loadtype_command): Fixed so it doesn't core dump.
+	* monitor.c (monitor_load): check the load type and load the file
+	accordingly. Default to gr_load_image().
+	* monitor.c (monitor_load_ascii_srec): Load an ascii file in
+	srecord format by downloading to the monitor.
+	* w89k-rom.c, op50n-rom.c: set supported load types.
+
+Mon Oct 17 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (ALLDEPFILES): Remove xcoffexec.c.
+	* Makefile.in: Remove xcoffexec.o rule.
+
+	* exec.c (exec_file_command): Add comment.
+
+	Fix data and bss relocation for VxWorks 5.1:
+	* remote-vx.c (vx_add_symbols): New function.
+	(vx_load_command, add_symbol_stub): Call it instead of
+	symbol_file_add.
+	(vx_wait): Remove comment which was wrong to useless.
+	* remote-vx.c: Reindent much of file.
+	* coffread.c (cs_to_section, find_targ_sec): New functions.
+	(process_coff_symbol): Set SYMBOL_SECTION to result
+	from cs_to_section.
+	(coff_symtab_read): Call cs_to_section and deal with result
+	rather than assuming sections are in a certain order.  Deal with
+	BSS.
+	* coffread.c: Remove text_bfd_scnum variable.
+
+Sat Oct 15 16:55:48 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* corelow.c: Format to standard.
+	(core_close): Use name instead of bfd_filename.
+
+Fri Oct 14 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* exec.c (map_vmap): Cast return from xmalloc to its proper type,
+	not to PTR.
+
+	* symfile.c (reread_symbols): Include bfd_errmsg string in error
+	message if bfd_close fails.
+	* exec.c (exec_close), solib.c (clear_solib), corelow.c
+	(core_close), objfiles.c (free_objfile), irix5-nat.c
+	(clear_solib), osfsolib.c (clear_solib), remote-utils.c
+	(gr_load_image): Check for errors from bfd_close.
+	* solib.c (look_for_base), remote-utils.c (gr_load_image),
+	remote-udi.c (download), corelow.c (core_open), symfile.c
+	(symfile_bfd_open), symfile.c (generic_load): Add comment
+	regarding error from bfd_close.
+	* remote-udi.c (download), remote-utils.c (gr_load_image): Add
+	comment about bogus handling of errors from bfd_openr.
+	* exec.c (exec_close): Add comment regarding memory leak and
+	dangling reference to vp->name.
+
+Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* eval.c (evaluate_subexp):  Make fnptr a LONGEST instead
+	of using longest_to_int.
+
+	* infcmd.c (run_stack_dummy):  Reinstate set_current_frame call,
+	mips and alpha targets need the real breakpoint pc for
+	creating the breakpoint frame.
+
+	* stack.c (return_command):  Cast return value to the return
+	type of the function from which we return.
+	* values.c (set_return_value):  Pass VALUE_CONTENTS unmodified
+	to STORE_RETURN_VALUE.
+
+	* symtab.c (lookup_symbol):  Remove search for `static mangled
+	symbols', the search for `static symbols' already looks for
+	mangled and demangled symbols via lookup_block_symbol.
+
+	* valarith.c (value_binop):  Use ANSI C arithmetic conversions
+	when performing integral evaluations, implement BINOP_EQUAL and
+	BINOP_LESS.
+	(value_equal, value_less):  Use value_binop to perform the
+	comparison if both operands have TYPE_CODE_INT.
+
+	* rs6000-tdep.c (pop_frame):  Make sure all registers are valid,
+	as they are written back later. Handle sp restore for frameless
+	functions. Use fdata.nosavedpc instead of fdata.frameless to
+	determine if the pc has been saved.
+	(function_frame_info):  Handle `mr r31,r1', which is generated by
+	gcc-2.6, as a synonym for `oril r31,r1,0'.
+	(skip_trampoline_code):  Handle shared library trampolines.
+	* xcoffread.c (read_xcoff_symtabs):  Record XMC_GL symbols with
+	their real name. Enables setting of breakpoints in shared libraries
+	before the executable is run.
+
+Fri Oct 14 19:39:47 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.h, remote-mon.c: Hack up to so the old ROM monitor
+	interface code still works with the new ROM monitor
+	structures. Fake out a couple of fields.
+
+Fri Oct 14 14:54:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* h8500-tdep.c (target_read_sp, target_write_sp, target_read_pc,
+	target_write_pc, target_read_fp, target_write_fp): Rename to
+	h8500_read_sp, etc.
+	(h8500_read_pc, h8500_write_pc): Add pid argument.
+	* config/h8500/tm-h8500.h (TARGET_READ_SP, TARGET_WRITE_SP,
+	TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP):
+	Change to match functions above.
+
+Thu Oct 13 13:24:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* NEWS: Add item about if and while.
+
+	* .gdbinit: Restore `end'; it was not excess.  Reindent
+	list-objfiles to make this clear.  Comment out all of
+	list-objfiles because old gdb's choke on it.
+
+Wed Oct 12 23:19:08 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* config/mips/tm-bigmips64.h: Just define TARGET_BYTE_ORDER and
+	include tm-mips64.h.
+
+Wed Oct 12 18:02:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (ANNOTATE_OBS): New definition.
+	(COMMON_OBS): Add exec.o.
+	(annotate.o): Remove extra compile rule.
+	* config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
+	everywhere.
+
+ 	* .gdbinit: Remove excess `end'.
+
+	* exec.c: Merge in RS6000 support from xcoffexec.c.
+	(symfile.h, objfiles.h, xcoffsolib.h): Include.
+	(vmap): New global variable.
+	(exec_close): Close and free objects in vmap chain.
+	(exec_file_command) [IBM6000_TARGET]: Set up initial vmap.
+	(bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c.
+	(exec_files_info): Print vmap information.
+	* xcoffexec.c: Remove.
+	* config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
+	(TDEPFILES): Use exec.o instead of xcoffexec.o.
+	* TODO: Remove pertinent items.
+
+Wed Oct 12 10:08:19 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they
+	are no longer needed as of gcc-2.6.0.
+
+Tue Oct 11 15:51:01 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* lynx-nat.c (child_wait): Correct handling of byte reversed SPARC
+        Lynx wait status.
+	(fetch_core_registers): Don't try to fetch a register if
+	regmap maps it to -1.
+	* sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
+	and FRAME_SAVED_L0 when setting saved_regs_addr.  SPARC Lynx
+	stores the registers in a weird order.
+
+Sat Oct  8 20:59:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* blockframe.c (reinit_frame_cache): Reinstate select_frame call
+	if inferior_pid is nonzero.
+
+Sat Oct  8 04:27:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Speed up GDB startup time by not demangling partial symbols.
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST),
+	symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+	No longer demangle partial symbols.
+	* symtab.c (lookup_symbol, list_symbols): Handle mangled
+	variables, e.g. C++ static members, via the minimal symbols.
+
+	Handle reordered functions in an objfile, for Irix 5.2 shared
+	libraries.
+	* objfiles.h (OBJF_REORDERED):  New bit in the objfile flags,
+	set if the functions in an objfile are reordered.
+	* mdebugread.c (parse_partial_symbols):  Detect reordered
+	functions in an objfile.
+	* symtab.c (find_pc_psymtab, find_pc_symtab):  Use expensive
+	lookup algorithm if the functions in the objfile are reordered.
+
+	* xcoffexec.c (exec_close):  If the current target has a copy
+	of the exec_ops sections, reflect the freeing of the sections
+	in current_target.
+
+	* valops.c (call_function_by_hand):  Use `sizeof dummy1', not
+	`sizeof dummy', for constructing the call dummy code.
+
+	* config/sparc/tm-sparc.h:  Add PARAMS declarations to all
+	function declarations.
+	* sparc-tdep.c (sparc_pop_frame):  Cast result of
+	read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
+
+	* irix5-nat.c (enable_break):  Set breakpoint at the entry point
+	of the executable, to handle the case where main resides in a
+	shared library.
+	* irix5-nat.c (solib_create_inferior_hook):  Reset stop_soon_quietly
+	after shared library symbol reading, to get rid of a warning from
+	heuristic_proc_start if the startup code has no symbolic debug info.
+
+	* breakpoint.h (struct breakpoint):  Add new fields language
+	and input_radix, to enable breakpoint resetting with the
+	proper language and radix.
+	* breakpoint.c (set_raw_breakpoint):  Initialize them.
+	(breakpoint_re_set_one):  Use them when resetting the breakpoint.
+	(breakpoint_re_set):  Preserve current language and input_radix
+	across breakpoint_re_set_one calls.
+
+	* symtab.c (decode_line_1):  Do not build a canonical line
+	specification for `*expr' line specifications.
+
+	* breakpoint.h (bpstat_stop_status):  Fix prototype declaration.
+
+Fri Oct  7 08:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	The point of these changes is to avoid reading the frame pointer
+	and stack pointer during stepping, to speed things up.
+	A.  Changes to not select a frame until we need a selected frame:
+	    * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
+	    * infrun.c (wait_for_inferior): Move call to select_frame back to
+	    normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
+	    Law, but the change was my idea); the only reason for that change
+	    was so we could save and restore the selected frame in
+	    wait_for_inferior, and now that flush_cached frames clears the
+	    selected frame, that should work OK now.
+	B.  Changes to not create a current_frame until we need one:
+	    * blockframe.c (get_current_frame): If current_frame is NULL, try
+	    to create an innermost frame.
+	    * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
+	    infrun.c (wait_for_inferior), thread.c (thread_switch),
+	    convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
+	    alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
+	    h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
+	    hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
+	    i960-tdep.c (pop_frame), m68k-tdep.c
+	    (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
+	    (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
+	    (pop_frame), config/arm/tm-arm.h (POP_FRAME),
+	    config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
+	    (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
+	    config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
+	    (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
+	    call create_new_frame.
+	    * corelow.c (core_open), altos-xdep.c (core_file_command),
+	    arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
+	    m3-nat.c (select_thread), sun386-nat.c (core_file_command),
+	    umax-xdep.c (core_file_command): Don't call create_new_frame; do
+	    call flush_cached_frames.
+	    * blockframe.c (reinit_frame_cache): Don't call create_new_frame
+	    or select_frame.
+	C.  Changes to get rid of stop_frame_address and instead only
+	fetch the frame pointer when we need it.
+	    * breakpoint.c (bpstat_stop_status): Remove argument
+	    frame_address; use FRAME_FP (get_current_frame ()).
+	    * infrun.c (wait_for_inferior): Don't pass frame pointer to
+	    bpstat_stop_status.
+	    * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
+	    ()) instead of stop_frame_address.
+	    * infrun.c (save_inferior_status, restore_inferior_status),
+	    inferior.h (struct inferior_status): Don't save and restore
+	    stop_frame_address.
+	    * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
+	    (select_thread): Remove stop_frame_address and uses thereof.
+	D.  Same thing for the stack pointer.
+	    * infrun.c (wait_for_inferior): Remove stop_sp and replace
+	    uses thereof with read_sp ().
+	E.  Change to eliminate one nasty little spot where we were
+	wanting to know the frame pointer from before the current step
+	(idea from GDB 3.5, which saved my ass, because my other ideas of
+	how to fix it were very baroque).
+	    * infrun.c: Remove prev_frame_address.
+	    * infrun.c (wait_for_inferior, step_over_function): Use
+	    step_frame_address instead of prev_frame_address.
+	F.  Same basic idea for the stack pointer.
+	    * inferior.h, infcmd.c: New variable step_sp.
+	    * infcmd.c (step_1, until_next_command): Set it.
+	    * infrun.c: Remove prev_sp and replace uses by step_sp.
+	    * infrun.c (wait_for_inferior): If we get out of the step
+	    range, then set step_sp to the current stack pointer before we
+	    start going again.
+
+Fri Oct  7 12:17:17 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* top.c (target_byte_order_auto): New static variable.
+	(set_endian): Mention that ``auto'' is permitted.
+	(set_endian_auto): New static function.
+	(show_endian): Change message based on target_byte_order_auto.
+	(set_endian_from_file): New function.
+	(init_main): Add command ``auto'' to endianlist.
+	* exec.c (exec_file_command): Call set_endian_from_file.
+	* defs.h (set_endian_from_file): Declare.
+
+Thu Oct  6 18:10:41 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/i386.c (flush_i_cache): New function, does nothing.
+	(frame_to_registers, registers_to_frame, set_step_traps,
+	clear_step_traps, do_status): Make non-static.
+
+Thu Oct  6 12:26:42 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already
+	defined, define as 0.
+	(FIX_CALL_DUMMY): Rewrite to remove presumption that host and
+	target are similar.
+	* config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(BREAKPOINT): Remove definition.
+	* config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(BREAKPOINT): Remove definition.
+	* config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
+	value of 1, rather than without a value.
+	* config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
+	* mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
+	run time rather than at compile time.
+
+	* remote-mips.c (break_insn): Remove.
+	(BREAK_INSN, BREAK_INSN_SIZE): Define.
+	(mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
+	(mips_remove_breakpoint): Likewise.
+
+	* defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h,
+	define TARGET_BYTE_ORDER as target_byte_order, and declare
+	target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
+	a test of TARGET_BYTE_ORDER.
+	* top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
+	defined:
+	(endianlist, target_byte_order): New variables.
+	(set_endian, set_endian_big, set_endian_little): New functions.
+	(show_endian): New function.
+	(init_cmd_lists): Initialize endianlist.
+	(init_main): Add commands ``set endian big'', ``set endian
+	little'', and ``show endian''.
+	* a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
+	BITS_BIG_ENDIAN to switch at run time rather than at compile time.
+	* coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
+	* remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
+	* values.c: Likewise.
+
+Wed Oct  5 11:41:24 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}.
+
+	* nlm/Makefile.in: Get rid of NWINCLUDES.
+	* config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES.
+	  User should now configure with --with-headers.
+
+Mon Oct  3 07:48:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/server.c (main): Silently accept all unrecognized
+	requests and send back a zero length acknowledge.  That is what
+	*-stub.c do and is what remote.c expects.
+
+Mon Oct  3 05:11:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (core_open):  Copy the modified to_sections_end
+	vector from current_target to core_ops too.
+
+	* gdbserver/server.c (main):  Silently accept query requests
+	and send back a zero length acknowledge.
+
+Fri Sep 30 17:17:21 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+        * nlm/Makefile.in: Don't define NWINCLUDES.
+        * config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES.
+
+Fri Sep 30 15:59:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace.
+
+Fri Sep 30 06:42:42 1994  Ian Lance Taylor  (ian@cygnus.com)
+
+	* lynx-nat.c (child_wait): Use status.w_status, not status, in
+	arithmetic.  status is a `union wait'.
+
+	* config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *.
+
+	* lynx-nat.c (child_wait): Pass fourth argument to ptrace.
+
+Thu Sep 29 08:22:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change.
+
+Wed Sep 28 17:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (complete_symtab): If last_source_file is set upon
+	entry, free it.
+
+Wed Sep 28 08:59:14 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab, case C_FILE):
+	Set main_aux before using it.
+
+	* xcoffexec.c (exec_close): If quitting, don't call clear_symtab_users.
+
+	* xcoffread.c (read_xcoff_symtab): Process XTY_LD symbols we were
+	ignoring before.  But continue to ignore XMC_DS.
+
+Wed Sep 28 00:35:23 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_read_array_type): Do not change the type code
+	to TYPE_CODE_PTR for "char foo[]".  Just make it a zero length
+	array type.
+
+	* hpread.c (hpread_type_translate): Handle T_UNS_LONG types with
+	lengths other than 32bits (HP C 9.69 represents an "unsigned char"
+	as an T_UNS_LONG with length 8).
+
+	* hpread.c (struct hpread_symfile_info): Delete have_module field
+	and accessor macro.  Minor indentation fix.
+	(hpread_build_psymtabs, case K_MODULE):  Only start a new psymtab
+	and reset state variables have_name & texthigh if pst is NULL.
+	(hpread_build_psymtabs, case K_SRCFILE): Only reset the name of a
+	partial symbol table if pst is non-NULL.  If pst is NULL, then
+	start a new psymtab.
+	(hpread_process_one_debug_symbol, case K_MODULE): Now empty.
+	(hpread_process_one_debug_symbol, case K_SRCFILE): Simplify and
+	correct handling of subfiles.
+
+Mon Sep 26 02:59:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* defs.h (misc_command_type):  Remove trailing comma from
+	enumerator list.
+
+Sun Sep 25 23:19:58 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (frame_saved_pc): Fix thinko in code to dig saved pc
+	out of an interrupt frame.
+
+Sun Sep 25 12:50:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
+	defined.
+	* values.c (unpack_double) [INVALID_FLOAT]: Ditto.
+	* mips-tdep.c (mips_print_register): Don't test float validity.
+	* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
+	config/arm/tm-arm.h, config/convex/tm-convex.h,
+	config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+	config/i386/tm-i386v.h, config/i386/tm-sun386.h,
+	config/i960/tm-i960.h, config/m68k/tm-m68k.h,
+	config/m88k/tm-m88k.h, config/mips/tm-mips.h,
+	config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
+	config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
+	config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+	config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
+	config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
+	Remove definition.
+
+Sun Sep 25 06:07:37 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove item about adding general multi-threaded stuff;
+	this is done.
+	Remove item about specifying arbitrary locations of stack frames
+	(this works on some machines).
+	Remove item about debugging functions without a frame pointer
+	(this works on some machines).
+	Remove item about re-writing macros which handle frame chaining and
+	frameless functions.  They have been re-written at least once
+	since that item was written.
+	Remove item about gdb catching SIGINT when attached; this is done.
+	Remove item about having list_command not read symbols--why bother?
+
+Sat Sep 24 17:40:10 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* TODO: Append contents of Projects file.
+	* Projects: Remove.
+
+Sat Sep 24 01:47:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (add_solib_stub):  Remove copying of to_sections,
+	pass current_target to SOLIB_ADD. The Sep 10 change failed
+	if SOLIB_ADD errored out, or if SOLIB_ADD was trying to access
+	target memory.
+	* corelow.c (core_open):  After reading the shared libraries,
+	copy the modified to_sections vector from current_target to
+	core_ops, so that core_close can free it later.
+	* config/rs6000/nm-rs6000.h, rs6000-nat.c (xcoff_relocate_core):
+	Pass down target parameter from SOLIB_ADD and use it instead of
+	directly accessing core_ops.
+
+Fri Sep 23 14:58:49 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* solib.c: *BSD systems need <a.out.h> to be included before
+	  <link.h>.
+
+	* i386b-nat.c: Add i386_float_info(), etc.
+	* config/i386/nm-nbsd.h: #define FLOAT_INFO.
+
+	* config/nm-nbsd.h: New file, for generic NetBSD native support.
+	* config/i386/nm-nbsd.h: Use it.
+	* config/sparc/nm-nbsd.h: Use it.
+	* config/ns32k/nm-nbsd.h: Use it.
+
+	* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
+	  (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
+	* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+	  New files, support for NetBSD/i386.
+	* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+     	  New files, support for NetBSD/ns32k.
+
+Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* .gdbinit: Add list-objfiles command.
+
+	* TODO: Reword item regarding NO_STD_REGS.
+
+	* coffread.c (record_minimal_symbol, coff_read_enum_type,
+	coff_read_struct_type): Allocate on symbol_obstack, not directly
+	via malloc/savestring.
+
+Tue Sep 20 15:42:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* TODO: Add more items.
+	* tests: Remove the directory and all of its (obsolete) contents.
+
+Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (init_stringtab): When copying length to stringtab,
+	use target format, not host format, since that is what the rest of
+	the code assumes.
+
+Mon Sep 19 15:48:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o,
+	  nlmstub.nlm, and nlmstub targets.  Removed NWSOURCE and
+	  NWINCLUDES definitions.
+	* i386-nlmstub.c: Removed.
+
+Mon Sep 19 07:48:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab): Cast bfd_asymbol_name to
+	char * (from const char *) before assigning.  Don't save string we
+	pass to record_minimal_symbol (it already saves it).
+
+
+Sat Sep 17 02:26:58 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* cp-valprint.c (static_field_print):  New variable, controls
+	printing of static members.
+	(_initialize_cp_valprint):  New print set subcommand
+	"static-members". Turn on printing of static members by default.
+	(cp_print_value_fields):  Print static members if necessary.
+
+	* solib.c:  Remove inclusion of libelf.h and elf/mips.h.
+	(elf_locate_base):  Use only standard BFD functions to collect
+	information about the .dynamic section. Check for DT_MIPS_RLD_MAP
+	tag only if it got defined via the inclusion of <link.h>.
+
+	* f-exp.y:  Write block for OP_VAR_VALUE.
+	* f-valprint.c (info_common_command):  Handle `info common'
+	without an argument correctly.
+
+	* c-typeprint.c (c_type_print_base):  Handle template constructors.
+	* symtab.c (gdb_mangle_name):  Handle template method mangling,
+	get rid of GCC_MANGLE_BUG code, which only applied to gcc-2.2.2.
+
+Fri Sep 16 16:06:08 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* gdbtypes.h (TYPE_INDEX_TYPE):  New macro.
+	* ch-typeprint.c, ch-valprint.c:  Use TYPE_INDEX_TYPE.
+	* ch-valprint.c (chill_val_print):  Pass index type directly
+	(instead of its TYPE_TARGET_TYPE) to print_type_scalar.
+	* stabsread.c (read_type):  Don't set TYPE_FLAG_TARGET_STUB
+	if the index type is a stub.
+
+Fri Sep 16 17:18:44 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh,
+	i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh,
+	ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh,
+	delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh,
+	m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh},
+	config/mips/riscos.mh, config/pa/hppahpux.mh,
+	config/rs6000/rs6000lynx.mh, config/sparc/{sparclynx.mh,
+	sun4sol2.mh}, config/tahoe/tahoe.mh, config/vax/{vaxbsd.mh,
+	vaxult.mh, vaxult2.mh} (REGEX, REGEX1, SYSV_DEFINE): No longer
+	define.
+	* config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define.
+
+Fri Sep 16 15:40:34 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h (QUIT):  Call interactive_hook to allow GUI to interrupt.
+	Also, add decl for symtab_to_filename.
+	* source.c (symtab_to_filename):  New.  Returns the file
+	associated with a symtab.
+	* top.c:  Define interactive_hook.  Called during QUIT to animate
+	the GUI.
+
+Fri Sep 16 00:14:40 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* stabsread.c (read_type):  Handle stub types for bitstrings.
+	* stabsread.c (read_array_type):  Check for stub domain type
+	using TYPE_FLAG_STUB, not its length.
+	* gdbtypes.c (create_set_type):  Handle a stub domain type.
+
+	* ch-exp.y:  Get rid of some extra non-terminals, and move
+	their rules into primitive_value.
+	* parser-defs.h:  Add comment about unary postfix operators.
+	* ch-lang.c (chill_op_print_tab):  Add '->', postfix and prefix.
+	* expprint.c (print_subexp):  Recognize unary postfix operator.
+
+Wed Sep 14 18:27:42 1994  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+        * remote-hms.c: use remote_debug instead of hms_silent toggle.
+        Add warnings about depreciation of `snoop' cmd.
+
+Wed Sep 14 18:18:58 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote-hms.c (hms_read_inferior_memory):  Cope when
+	target sends both \r and \n.
+
+Wed Sep 14 17:14:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-mips.c (mips_error): Place NORETURN macro correctly.
+	* TODO: Add item about START_INFERIOR_TRAPS_EXPECTED.
+
+Wed Sep 14 14:26:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Fix obsolete comment about
+	mst_solib_trampoline.
+
+	* f-valprint.c (f_val_print): Change cast of valaddr from
+	CORE_ADDR * to char **, since that is how it is used.
+
+	* dbxread.c (read_dbx_dynamic_symtab): Save copy of symbol names
+	using obsavestring, and pass that to prim_record_minimal_symbol.
+	Having the objfile point to bfd_asymbol_name directly doesn't work
+	if we save and restore a mapped symbol file.
+
+
+Tue Sep 13 18:23:26 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* w89k-rom.c, op50-rom.c, monitor.c, config/pa/hppapro.mt: New files
+	to add a generic ROM monitor interface, and support file for the
+	WinBond W89K and the Oki OP50N PA based target boards.
+
+
+Sun Sep 11 22:34:57 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (REGISTER_NAMES): Use r26-r23 for arg0-arg3.
+
+Sun Sep 11 04:36:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* irix5-nat.c, osfsolib.c, solib.c (solib_add):  Simplify last
+	change by replacing `symbols_added' with `so_last'.
+	* mdebugread.c (parse_external, parse_partial_symbols):  Ignore
+	global common symbols, they will be resolved by the runtime loader.
+	* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
+	Handle scSCommon like scCommon symbols.
+
+Sat Sep 10 01:43:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (add_solib_stub):  Copy to_sections changes from
+	core_ops to current_target after adding the shared libraries.
+	* partial-stab.h (N_EXCL), dbxread.c (add_old_header_file,
+	find_corresponding_bincl_psymtab):  Change `repeated header not seen'
+	error to a complaint, simplify complaint.
+	* procfs.c (signalname, errnoname):  Make `name' const.
+	* symfile.c (reread_symbols):  Use filename from old BFD to
+	reopen the objfile.
+	* values.c (record_latest_value):  Don't record value in the
+	history chain until we are sure there won't be an error.
+
+Fri Sep  9 15:52:09 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/Makefile.in: remove MMALLOC, READLINE, TERMCAP, and other
+	  cruft.
+
+	* config/i386/gdbserve.mt: New file, defs for i386 nlm stub.
+
+Thu Sep  8 17:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (fromhex): Make error more explicit.
+	(read_frame): Don't print bad checksum information unless
+	remote_debugging.  Don't use repeat count unless it's > 0.
+	* remote-e7000.c (expect): When echoing, ignore multiple newlines.
+	(e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops):
+	Optionally cope with BC style breakpoints.  
+	(e7000_command):  After command send directly to the E7000 mark
+	registers as changed. 
+	(why_stop, e7000_wait: Understand BC style stop condition.
+	* sh-tdep.c (sh_skip_prologue):  Understand more complicated
+	sequences.  (frame_find_saved_regs): Likewise.
+	* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
+	Handle extra arg.
+	* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
+	(more work here to come)
+	* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
+	fields.
+
+Thu Sep  8 16:15:34 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* sparclite/Makefile.in: Assorted stuff needed for eload.
+
+	* sparclite/eload.c: Merge in command line argument parsing and
+	  error message handling improvements orignally made to aload.c.
+
+Wed Sep  7 23:24:50 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* defs.h (enum misc_command_type, command_control_type): Enums
+	for describing the command and control types.
+	(struct command_line): Add new fields to keep track of the command
+	type and body associated with the command.
+	* top.c: Include value.h.  Delete whitespace at the end of lines.
+	(build_command_line, get_command_line): New functions.
+	(execute_control_command, while_command, if_command): Likewise.
+	(realloc_body_list, read_next_line): Likewise.
+	(recurse_read_control_structure): Likewise.
+	(execute_user_command): Call execute_control_command.
+	(read_command_lines): Simplify by calling read_next_line, call
+	read_control_structure for "if" and "while" commands.
+	(free_command_lines): Free new fields in the command structure.
+	(define_command): Reset control_level to zero.
+	(init_main): Install command handlers for "if" and "while" commands.
+
+Tue Sep  6 16:24:07 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	 * c-typeprint.c (c_type_print_varspec_prefix,
+	 c_type_print_varspec_suffix): Add cases for Fortran type codes.
+	 * eval.c (evaluate_subexp): For OP_ARRAY expressions in Fortran,
+	 call f77_value_literal_string instead.
+	 * f_exp.y: Include <string.h>, move include of parser-defs.h.
+	 (parse_number): Translate 'd' floats to 'e' so atof() works. 
+	 (yylex): Remove unused variables.
+	 * f-lang.c: Include <string.h>.
+	 (get_bf_for_fcn): Remove unused variable.
+	 * f-typeprint.c (f_type_print_varspec_prefix,
+	 f_type_print_varspec_suffix): Remove unused
+	 variables, add cases to switch statements.
+	 (f_type_print_base): Remove unused variables.
+	 * f-valprint.c (gdbcore.h, command.h): Include.
+	 (f77_get_dynamic_lowerbound, f77_get_dynamic_upperbound):
+	 Call read_memory_integer with correct number of arguments.
+	 (f77_get_dynamic_upperbound): Call f77_get_dynamic_lowerbound
+	 with correct argument type.
+	 (f77_print_array): Removed unused array array_size_array.
+	 (f_val_print): Don't use a CORE_ADDR as a char *.
+	 * valops.c (value_cast): Handle COMPLEX and BOOL types.
+	 (value_assign): Handle Fortran literal string and complex values.
+	 (f77_cast_into_complex, f77_assign_from_literal_string,
+	 f77_assign_from_literal_complex): New functions.
+
+Mon Sep  5 14:46:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-typeprint.c (chill_type_print_base):  Make TYPE_CODE_RANGE
+	case more robust.
+
+Sun Sep  4 16:06:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* i960-tdep.c (signal.h): Don't include.
+
+	* cxux-nat.c (target_is_m88110): Remove definition.
+
+	* configure.in (config/nm-empty.h): If cross only, use instead
+	of config/nm-trash.h.
+	* config/nm-trash.h: Remove.
+	* config/nm-empty.h: New file.
+	* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
+	* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
+	* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+	* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+	* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+
+
+Fri Sep  2 17:35:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* configure.in: No longer look for nm, tm, and xm headers in
+	  config/<header>; they are always in config/<cpu>/<header>.
+
+Fri Sep  2 16:40:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* objfiles.c (allocate_objfile): Add the newly-created objfile to
+	the end of the list of objfiles, instead of at the beginning.
+
+	* xcoffread.c (allocate_include_entry): New function, abstracted
+	from code in record_include_begin.
+	(record_include_begin, record_include_end): Call it.
+
+	* blockframe.c (reinit_frame_cache): Test inferior_pid instead of
+	target_has_stack to decide whether to create a real stack frame
+	for the cache.
+
+	* coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
+	section.
+	* config/m88k/tm-cxux.h (CXUX_TARGET): Define.
+
+	* h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
+
+Fri Sep  2 09:51:46 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/sparc/tm-nbsd.h: Add #defines to map NetBSD struct and
+	  field names into what is expected by sparc-nat.c.
+
+Thu Sep  1 17:32:54 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* c-typeprint.c (c_typedef_print):  Add missing Chill support.
+
+Thu Sep  1 15:41:21 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* rs6000-pinsn.c (print_insn):  Use powerpc disassembler when
+	doing Power PC.
+	* config/powerpc/tm-ppc-nw.h:  Define GDB_TARGET_POWERPC.
+
+	* config/i386/i386lynx.mh, config/m68k/m68klynx.mh,
+	config/rs6000/rs6000lynx.mh, config/sparc/sparclynx.mh:  Enable
+	ser-tcp.
+
+	* nlm/Makefile.in:  Get rid of NWSOURCE.
+	* nlm/alpha-io.S (inVti, outVti):  Remove extraneous ldha's.
+	* nlm/gdbserve.o:  Add dummy __main routine.
+	* nlm/gdbserve.def:  Turn on debug.
+
+Thu Sep  1 12:36:39 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/xm-nbsd.h: Don't define SET_STACK_LIMIT_HUGE; it is obsolete.
+
+Thu Sep  1 11:01:40 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/tm-nbsd.h: New file, support for all NetBSD targets.
+	* config/xm-nbsd.h: fix typo.
+	* config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from
+	  {nm,tm,xm}-sparcnbsd.h to conform to prefered file naming
+	  conventions.
+	* configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht].
+
+Wed Aug 31 14:40:33 1994  Jason Molenda (crash@phydeaux.cygnus.com)
+
+	* remote-udi.c (udi_read_inferior_memory,udi_write_inferior_memory): 
+	change typeo in error msg (`inferrior' -> `inferior').
+
+Wed Aug 31 09:17:02 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* inflow.c (set_sigint_trap, clear_sigint_trap): Check for
+	attach_flag (this check was performed by the callers).  Also check
+	inferior_thisrun_terminal.
+	* inftarg.c (child_wait), lynx-nat.c (child_wait),
+	procfs.c (wait_fd), symm-nat.c (child_wait): Don't check
+	attach_flag in deciding whether to call set_sigint_trap and
+	clear_sigint_trap. 
+
+	* value.h (struct value): Change literal_data from PTR to char *,
+	since that is the way it is used.
+
+Tue Aug 30 21:56:54 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c (som_symfile_read): Force unwinds to be re-read after
+	reading in a new partial symbol table.
+
+Tue Aug 30 13:14:16 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/h8500/tm-8500.h (DONT_USE_REMOTE): Remove definition,
+	an obsolete conditional.
+	* config/pa/tm-hppa.h (BREAKPOINT) [KERNELDEBUG]: Remove use,
+	an obsolete conditional.
+	* config/rs6000/rs6000.mh, config/rs6000/rs6000.mt: Clean up
+	comments.
+
+Mon Aug 29 14:39:42 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (ns32k-opcode.h): Remove reference.
+	(ns32k-pinsn.o): Update dependencies.
+	* ns32k-opcode.h: Remove file.
+	* ns32k-pinsn.c (print_insn): Call version in libopcodes, remove
+	all other code in this file. 
+
+Mon Aug 29 12:04:07 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlm/configure.in:  Stop using cpu.c.  Put it in TDEPFILES instead.
+	* config/alpha/gdbserve.mt (TDEPFILES):  Remove alpha-patch.o.
+
+	* nlm/Makefile.in:  Add rule for .S.o.
+	* nlm/aio.h:  Protect from multiple inclusions.
+	* nlm/alpha-io.S:  Remove everything we don't need.
+	* nlm/{alpha-patch.c, alpha-patch.h, alpha-uart.c, alpha-uart.h}:
+	Remove, no longer needed.
+	* nlm/alpha.c:  Merge in lots of stuff from previous files.
+	* nlm/alpha.h:  Don't #include alpha-patch.h.  Make
+	breakpoint_insn extern.
+	* Move stuff from alpha-patch.h into here.
+
+	* config/alpha/gdbserve.mt (TDEPFILES):  Get rid of alpha-uart.o.
+
+Mon Aug 29 11:34:34 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* annotate.c (annotate_starting): Flush output.
+
+Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symfile.c (symbol_file_add):  Move reinit_frame_cache call to
+	the callers of symbol_file_add. Gets rid of heuristic fence-post
+	warnings on mips and alpha targets when the PC resides in a shared
+	library which is not yet read in.
+	* coff-solib.c (coff_solib_add), cxux-nat.c (add_shared_symbol_files),
+	irix5-nat.c (solib_add), osfsolib.c (solib_add),
+	remote-vx.c (vx_open), solib.c (solib_add):
+	Add call to reinit_frame_cache after all shared libraries are read in.
+	* remote-udi.c (udi_load), remote-vx.c (vx_load_command),
+	symfile.c (symbol_file_command, add_symbol_file_command):
+	Add call to reinit_frame_cache after symbol_file_add.
+
+Wed Aug 24 17:45:14 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/xm-nbsd.h: New file, support for all NetBSD ports.
+	* config/sparc/{nm-sparcnbsd.h,tm-sparcnbsd.h,xm-sparcnbsd.h,
+	  sparcnbsd.mh,sparcnbsd.mt}: New files, support for NetBSD/sparc.
+	* configure.in: Add sparc-*-netbsd target.
+
+Wed Aug 24 13:17:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-vx.c (vx_attach): Interpret the command argument as an
+	unsigned long.
+
+Wed Aug 24 13:08:08 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+	* configure.in: Change i[34]86 to i[345]86.
+	* nlm/configure.in: Likewise.
+	* gdbserver/configure.in: Likewise.
+
+Wed Aug 24 09:41:09 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* configure.in (i386-*-netware): Automatically configure nlm
+	  subdir.
+
+Tue Aug 23 17:51:13 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* nlm/gdbserve.c: conditionalize header file inclusion for either
+	  NetWare 4.0 or PIN targets.
+	* nlm/i386.c: include appropriate header files.
+	* nlm/prelude.c: define TERMINATE_BY_UNLOAD for NetWare 4.0
+	  targets.
+
+Tue Aug 23 16:54:16 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlm/ppc.c (set_step_traps clear_step_traps):  Cleanups.
+	* nlm/gdbserve.def:  Autoload clib.
+
+Tue Aug 23 12:05:19 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* breakpoint.c (condition_command): Call breakpoints_changed.
+
+	* gdbtypes.h: Declare f77_create_literal_string_type and
+	f77_create_literal_complex_type.
+	* valops.c (f77_value_literal_string, f77_value_substring,
+	f77_value_literal_complex): Use xmalloc not malloc.
+	* valops.c (f77_value_literal_string, f77_value_substring):
+	Make addr char * not CORE_ADDR.
+	* value.h (struct value): Add new field literal_data of aligner union.
+	(VALUE_LITERAL_DATA): Use it.
+	* f-lang.h: Declare find_common_for_function.
+	* value.h, valops.c: Split VALUE_SUBSTRING_START into memaddr and
+	myaddr fields of a union.  Don't overload it with the frame field
+	(not sure this is necessary; I'm not sure what lval_* codes
+	VALUE_SUBSTRING_* can be used with).
+
+Mon Aug 22 11:45:01 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/a29k/{a29k-kern.mt,a29k-udi.mt,a29k.mt,ultra3.mh,
+	ultra3.mt}: Clean up comments, remove no-longer-used definitions.
+
+	* rs6000-nat.c: Include libbfd.h again, needed until reference
+	to bfd_cache_lookup is cleaned out.
+
+	* config/i386/linux.mh (XM_CLIBS): Add -lm.
+
+Mon Aug 22 10:42:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	Work to reduce the interrupts-off duration when running in DOS.
+	* ser-go32.c:  (dos_async_ready): See if anything is in the buffer.
+	(dos_async_rx): rewrite to unpack as many characters from the
+	asynctsr as possible into a local buffer.
+	
+Fri Aug 19 14:55:45 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Initial Fortran language support, adapted from work by Farooq Butt
+	(fmbutt@engage.sps.mot.com).
+	* Makefile.in: Add Fortran-related files and dependencies.
+	* defs.h (language_fortran): New language enum.
+	* language.h (_LANG_fortran): Define.
+	(MAX_FORTRAN_DIMS): Define.
+	* expression.h: Reformat to standard.
+	(MULTI_F77_SUBSCRIPT, OP_F77_UNDETERMINED_ARGLIST,
+	OP_F77_LITERAL_COMPLEX, OP_F77_SUBSTR): New expression opcodes.
+	* gdbtypes.h (TYPE_CODE_COMPLEX, TYPE_CODE_LITERAL_COMPLEX,
+	TYPE_CODE_LITERAL_STRING): New type codes.
+	(type): New fields upper_bound_type and lower_bound_type.
+	(TYPE_ARRAY_UPPER_BOUND_TYPE, TYPE_ARRAY_LOWER_BOUND_TYPE,
+	TYPE_ARRAY_UPPER_BOUND_VALUE, TYPE_ARRAY_LOWER_BOUND_VALUE): New
+	macros.
+	(builtin_type_f_character, etc): Declare.
+	* value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_START): Define.
+	* f-exp.y: New file, Fortran expression grammar.
+	* f-lang.c: New file, Fortran language support functions.
+	* f-lang.h: New file, Fortran language support declarations.
+	* f-typeprint.c: New file, Fortran type printing.
+	* f-valprint.c: New file, Fortran value printing.
+	* eval.c (evaluate_subexp): Add code for new expression opcodes,
+	fix wording of error message.
+	* gdbtypes.c (f77_create_literal_complex_type,
+	f77_create_literal_string_type): New functions.
+	* language.c (set_language_command): Add Fortran info.
+	(calc_f77_array_dims): New function.
+	* parse.c (length_of_subexp, prefixify_subexp): Add cases for new
+	expression opcodes.
+	* symfile.c (deduce_language_from_filename): Recognize .f and .F
+	as Fortran source files.
+	* valops.c (f77_value_literal_string, f77_value_substring,
+	f77_value_literal_complex): New functions.
+
+Fri Aug 19 13:35:01 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-typeprint.c (c_print_type):  Assume demangled arguments
+	if a '(' is found in varstring, looking for ')' at the end of
+	varstring did fail with demangled const member functions, which
+	have a trailing `const'.
+	* remote.c (get_offsets, putpkt):  Change to `char' buffers,
+	to avoid errors when compiling with DEC c89.
+	(remote_wait):  Cast to `char *' before passing buffer to
+	fputs_filtered, to avoid errors when compiling with DEC c89.
+	(remote_wait):  Do not return inferior_pid by default, this
+	statement is never reached, which causes warnings from some
+	compilers.
+	* stabsread.c (scan_file_globals):  Ignore static minimal symbols.
+	* symfile.c (load_command):  If called with no argument, try
+	to get the filename from the executable file.
+	(generic_load):  Remove check for NULL filename, it is done
+	in load_command now.
+
+Fri Aug 19 10:36:15 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Makefile.in (ALLDEPFILES): Add hpread.c.
+	(hpread.o): Add dependencies.
+
+	* somread.c: Do not include "aout/aout64.h".  SOM has nothing to
+	do with a.out.
+	(BYTES_IN_WORD): Delete.
+	(som_symfile_read): Call hpread_build_psymtabs to build any
+	minimal symbols based on the HP C native debug symbols.
+	(som_symfile_finish): Call hpread_symfile_finish.
+	(som_symfile_init): Call hpread_symfile_init.
+	* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
+	* hppa-tdep.c (hpread_adjust_stack_address): New function.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
+	* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
+	* hpread.c: New file.
+
+Fri Aug 19 00:40:55 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Revert incorrect change
+	from June 2, 1994 (what was I thinking?!?).  Fix it right this
+	time.
+
+Thu Aug 18 17:01:35 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* nlm/i386.c, nlm/i386.h: New files that contain i386 specific code.
+
+Thu Aug 18 14:39:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* README: Grammar improvements, clarifications, updates.
+
+Wed Aug 17 23:08:53 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (TARGET_FLAGS_TO_PASS):  Pass down LD_FOR_TARGET and
+	NLMCONV_FOR_TARGET.  (SUBDIRS):  Add nlm target.
+	* configure.in (powerpc-*-netware*):  Automatically configure nlm
+	subdir.
+	* nlm/Makefile.in:  Add {CC NLMCONV LD}_FOR_TARGET.  Remove alpha
+	specific stuff.  Make things more configurable.
+	* nlm/configure.in:  Add powerpc-*-netware* target.  Use
+	gdbserve.mt/cpu.c/cpu.h for target stuff.  Get rid of tm/xm/nm.h
+	files.
+	* nlm/gdbserve.c:  Move Alpha specific stuff into other files.
+	Remove lots of architecture-specific stuff.
+	* nlm/gdbserve.def:  Add new imports.
+	* nlm/ppc.c, nlm/ppc.h:  New files that contain PowerPC specific code.
+	* nlm/prelude.c:  Don't include libhooks.h, get rid of call to
+	register library.
+	* nlm/prelude.o:  What was this doing here?
+	* config/alpha/gdbserve.mt:  Defs for alpha nlm stub.
+	* config/powerpc/gdbserve.mt: Defs for PowerPC nlm stub.
+	* config/powerpc/ppc-nw.mt:  Defs for PowerPC target for GDB.
+	* config/powerpc/tm-ppc-nw.h:  Ditto.
+
+	* nlmstub.def:  New file, contains imports for 386 nlm stub.
+
+Wed Aug 17 23:17:33 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* remote-pa.c: New file for HPPA embedded support. Currently it's
+	a copy of remote.c.
+	* config/pa/hppabsd.mt,hppahpux.mt,hppaosf.mt: User remote-pa.c.
+
+Wed Aug 17 13:19:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/m68k/tm-delta68.h (EXTRACT_RETURN_VALUE,
+	STORE_RETURN_VALUE): Define to use %a0 for pointers.
+
+Wed Aug 17 07:43:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-mips.c: Remove unused declaration of mips_load.
+
+Tue Aug 16 16:45:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coffread.c: General cleanup, and support for section offsets.
+	(time.h, sys/types.h, libbfd.h): Don't include.
+	(cur_src_start_addr, cur_src_end_addr): Rename to
+	current_source_start_addr, current_source_end_addr.
+	(nlist_stream_global): Remove.
+	(nlist_bfd_global): New global variable.
+	(coff_symfile_read): Remove code that gets and uses fileno()
+	directly.
+	(read_coff_symtab, enter_linenos, process_coff_symbol): Add
+	section_offsets parameter, add text/data section offset to
+	appropriate symbols' values.
+	(read_one_sym): Use bfd_read instead of fread.
+	(init_stringtab, init_lineno): Change first parameter to a bfd,
+	use bfd routines instead of raw I/O.
+
+Tue Aug 16 15:24:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (decode_line_1): If funfirstline and we get a
+	non-LOC_BLOCK symbol (e.g. variable or type), then error().
+
+	* Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB):
+	Remove; unused.
+	(TAGFILES_NO_SRCDIR): Remove ALLPARAM.
+	(HFILES_NO_SRCDIR): Remove all files in config sub-directory.
+	(TAGS): Also pass result of find on config sub-directory to etags.
+	(ALLPARAM): Remove; now unused.
+
+Sun Aug 14 13:05:26 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.13.1
+	* NEWS, README:  Update to match gdb 4.13 release version.
+
+Sat Aug 13 08:22:50 1994  Fred Fish  (fnf@cygnus.com)
+
+	Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* cxux-nat.c:  Remove dangling #else block.
+	(m88k_harris_core_register_addr):  New function.
+
+	* environ.c (init_environ):  If no environment, do nothing.
+
+Fri Aug 12 19:30:53 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Delete rest of TODO list.  Do not include "libbfd.h",
+	<time.h>, <sys/types.h>, "demangle.h", <sys/file.h>,
+	"expression.h", "language.h", "gdbtypes.h", "demangleh".
+	Move all global variables into the private symbol table structure
+	and add accessor macros.  Update some comments.
+	(hpread_build_psymtabs): Delete dbsubc_addr, we don't need it.
+	(hpread_end_psymtab): New function to end a partial symbol table,
+	all callers changed (no more bogus sharing with dbxread.c).
+
+Fri Aug 12 15:52:37 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (remote_wait):  Return inferior_pid instead of 0 for
+	`W` message.
+
+Fri Aug 12 11:47:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* sparclite/aload.c (sys_error, error): Use vfprintf for variable
+	  argument lists.
+
+Thu Aug 11 04:06:42 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* defs.h (concat, basename, buildargv, freeargv, strerrno, strsigno,
+	errno_max, signo_max, strtoerrno, strtosigno):  Delete.
+	Include "libiberty.h" instead.
+
+Wed Aug 10 13:23:47 1994  Rick Sladkey  (jrs@world.std.com)
+
+	* i386v-nat.c (i386_insert_nonaligned_watchpoint):
+	add additional argument specifying raw address to permit
+	proper release of debug registers.
+	(i386_insert_watchpoint, i386_insert_aligned_watchpoint):
+	change all callers.
+
+Wed Aug 10 16:13:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, top.c:  Use `extern' in declarations of GUI hooks, and
+	define them in top.c.  Add comments to the hooks.
+
+Wed Aug 10 15:57:43 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.c (gdbsim_ops): Set `to_insert_breakpoint' and
+	`to_remove_breakpoint' fields.
+
+Wed Aug 10 15:46:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c (run_command): Remove comment suggesting using
+	target_has_execution instead of inferior_pid.
+
+Wed Aug 10 10:33:20 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-mips.c (mips_open): add code to handle baud rate.
+
+Tue Aug  9 09:44:42 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Call target_resume() upon
+	detection of new processes.
+
+	* procfs.c (create_procinfo):  Return pointer to new procinfo
+	structure.
+	* (do_detach):  Spacing & formatting cleanup.
+	* (procfs_wait):  Move wait_again label to ensure that we really
+	wait again.  On exit from fork, release new child from gdbs'
+	clutches.
+	* (procfs_set_sproc_trap):  Enable trapping of fork and vfork.
+
+Mon Aug 08 15:34:13 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_process_one_debug_symbol): Fix block scoping
+	problem (losing localvars on the close-brace instead of after
+	the close brace).
+
+Mon Aug  8 15:09:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c (handle_exception): Wait until the thread has
+	  been started before killing the NLM by pointing the PC at
+	  _exit().
+
+Sat Aug  6 22:27:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-irix5.h (IN_SIGTRAMP):  Redefine for Irix 5,
+	Irix 5 has a standard _sigtramp signal handler.
+	* irix5-nat.c (solib_add):  Get rid of sigtramp_address handling,
+	it is not needed for a standard _sigtramp signal handler.
+	Add shared library sections to the section table of the target
+	before adding the symbols.
+	* mips-tdep.c (mips_skip_prologue):  Do not skip load immediate
+	instructions that do not prepare a stack adjustment.
+	* regex.c (SIGN_EXTEND_CHAR):  Update to emacs-19.25 definition,
+	which does the right thing on machines where `char' is unsigned.
+
+Fri Aug  5 17:50:59 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (remote_open):  Move setting of inferior_pid prior to
+	call to remote_start_remote.  Also use unique value for pid to
+	avoid confusion with read_register_pid & friends.
+	* (remote_wait):  Return inferior_pid instead of 0 in all cases.
+
+Fri Aug  5 12:23:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* dwarfread.c (bfd.h): Don't include.
+
+Fri Aug  5 09:08:34 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c (handle_exception): Point the PC at _exit() to
+	  kill the program being debugged.  KillMe(), the undocumented
+	  call intended for this purpose, causes the server to hang.
+
+Thu Aug  4 16:26:06 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (read_frame): Calculate run length encoded checksum
+	correctly.
+	* config/sh/stub.c: New file.
+
+Thu Aug  4 14:34:12 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (find_default_run_target):  Make sure to_can_run is set
+	before calling it.
+
+Thu Aug  4 11:46:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove note about fast watchpoints and remove obsolete
+	Mach stuff.
+
+Thu Aug  4 11:08:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/xm-i386v4.h, config/m68k/xm-m68kv4.h,
+	config/sparc/xm-sun4sol2.h (NORETURN): Don't define.
+	* config/m88k/tm-cxux.h (ARCH_NUM_REGS): Undefine before defining.
+
+Thu Aug  4 10:26:36 1994  Stu Grossman  (grossman@rtl.cygnus.com)
+
+	* target.c (add_target):  Don't call clean_target on target
+	vectors anymore.
+	* (unpush_target):  Test for to_close being set before calling.
+	* (target_xfer_memory, target_info):  Check for to_has_memory
+	before playing with memory.
+
+	* remote.c (remote_open):  Set inferior_pid to make kill command
+	happy.
+	* inflow.c (kill_command):  Revert change of Aug 2.  Use
+	inferior_pid to determine whether to print out "The program is not
+	being run." message.
+
+Thu Aug  4 07:55:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/i386m3.mh (NAT_CLIBS): Add -lmachid and -lnetname.
+	* m3-nat.c, config/nm-m3.h: #if 0 REQUEST_QUIT stuff.
+	* m3-nat.c: Pass argument to return_to_top_level.
+	Declare m3_kill_inferior before use.
+	(port_chain_insert): In "can't happen" case, abort rather than
+	setting `mid' to large decimal constant (which gcc warns about).
+	(get_thread_name): Use cast to convert const char * to char *.
+	(add_mach_specific_commands): #if 0 "thread break" command.
+	(m3_trace_him): Call push_target.
+	(mach_really_wait): New argument pid; remove unused
+	variable pid.
+	(intercept_exec_calls): Call target_terminal_init and
+	target_terminal_inferior once the child execs.
+	* infrun.c (proceed): Pass argument to PREPARE_TO_PROCEED.
+
+Wed Aug  3 22:41:13 1994  Tom Lord  (lord@x1.cygnus.com)
+
+	* procfs.c (procfs_mourn_inferior): don't dereference the
+	procinfo pointer after it has been freed.
+
+Wed Aug  3 12:05:13 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Improve pluralization in display
+	of breakpoint hit counts.
+
+	* language.h (struct language_defn): Remove unused field
+	la_longest_float.
+	(longest_float): Remove, no longer used.
+	* language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn): Remove init of la_longest_float field.
+	* c-lang.c (c_language_defn, cplus_language_defn,
+	asm_language_defn): Ditto.
+	* ch-lang.c (chill_language_defn): Ditto.
+	* m2-lang.c (m2_language_defn): Ditto.
+
+Tue Aug  2 10:58:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h (bfd_read, bfd_seek): Remove declarations.
+	* os9kread.c, rs6000-nat.c (libbfd.h): Don't include.
+
+Tue Aug  2 09:50:50 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* inflow.c (kill_command): Fix a bug which prevented target
+	  programs to be killed.
+
+Mon Aug  1 18:48:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h: Change two-line declarations to one-line form.
+	(NORETURN): Define as "volatile" only for older GCCs.
+	(ATTR_NORETURN): Define for newer GCCs.
+	* procfs.c (proc_init_failed): Add ATTR_NORETURN to declaration.
+
+Mon Aug  1 16:43:24 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (mention), main.c (fputs_unfiltered): Add comments.
+	* breakpoint.c (delete_breakpoint, enable_breakpoint,
+	disable_breakpoint): Don't call breakpoints_changed; it is now
+	called via the *_breakpoint_hook functions.
+	* annotate.c (_initialize_annotate, breakpoint_changed): New functions.
+
+Mon Aug  1 13:38:04 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* stabsread.c (read_type): Fix a bug in enum size calculation.
+
+Mon Aug  1 01:36:13 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (compare_unwind_entries): Add "const" to both
+	argument types to shut up GCC.
+
+	* hppa-tdep.c (saved_pc_after_call): If the saved PC is in a
+	linker stub, then return the address the stub will return to.
+	(frame_saved_pc): Correctly restart the search for the saved
+	pc when a linker stub is encountered.
+
+	* hppa-tdep.c (inst_saves_gr): Handle 16 and 8 bit instruction
+	register stores emitted by the version 9 HP compilers.
+	(inst_saves_fr): Relax test for a specific base register (%r1);
+	this avoids losing with the version 9 HP compilers.
+	(skip_prologue): Try to skip argument stores emitted by the HP
+	compilers.  It's not perfect, but it's better than before.
+
+Fri Jul 29 23:20:30 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (write_pc write_pc_pid):  Remove casts to long when
+	calling write_register_pid.
+	* (write_register_pid):  Add prototype.
+
+Fri Jul 29 21:56:23 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (read_frame):  Split readchar/checksum calculation into
+	two parts since evaluation order is undefined.
+
+Fri Jul 29 13:46:08 1994  Fred Fish  (fnf@cygnus.com)
+
+        From Kevin A. Buettner (kev@cujo.geg.mot.com).
+	* Makefile.in (coredep.o):  Add inferior.h as dependency.
+	* inflow.c:  Add F_SETOWN to list of defines to check
+	around code that uses F_SETOWN.
+
+Fri Jul 29 09:59:05 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): If using newlib,
+	  set the -L and -B directory prefixes so we can link with it.
+
+Thu Jul 28 14:37:36 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (INSTALLED_LIBS, CLIBS, DEPFILES):  Add support for
+	--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
+	where appropriate.
+
+	* General hackery to support alternate user-interface.
+	* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
+	disable_breakpoint):  Call hooks for alternate user-interface.
+	* defs.h:  Add declarations for alternate user-interface hooks.
+	* main.c (main):  Add --nw (and --nowindows) options to disable
+	the GUI.
+	* (near call to command_loop):  Call command_loop_hook if set.
+	* (fputs_unfiltered):  Call fputs_unfiltered_hook if set.
+	* stack.c:  Call print_frame_info_listing_hook if set.
+	* top.c (gdb_init):  Initialize targets.c and utils.c prior to
+	other files to make sure that calls to error and warning will
+	work.  Call init_ui_hook after everything else.
+	* utils.c (query):  Call query_hook if set.
+	* (gdb_flush):  Call flush_hook if set.
+	* Change _initialize_utils to initialize_utils cuz we don't use
+	automatic initialization of utils.c anymore.
+
+
+	* remote.c:  Get rid of #ifdef DONT_USE_REMOTE.  It's no longer
+	necessary.
+
+Thu Jul 28 14:52:01 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
+	  there and we are using the gcc from the tree.
+	  (LD_FOR_TARGET): Look for ld in ../ld/ld.new.
+
+Thu Jul 28 10:43:36 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (annotate.o):  Add dependencies.
+
+Wed Jul 27 14:34:42 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* sparclite/aload.c: Added new -q (quiet) option.
+	  return 0 exit status if file was successfully downloaded.
+
+	* nlm/gdbserve.c: merge in command line argument parsing changes
+	  and bug fixes made to i386-nlmstub.c.
+
+	* i386-nlmstub.c: The returnLength field must be initialized
+	  before portConfig is passed to AIOGetPortConfiguration.
+	  Compare command line arguments with strnicmp(); args are
+	  case insensitive on netware.
+
+Wed Jul 27 09:24:19 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (DISTSTUFF):  Add definition.
+	(diststuff):  Add for new distribution support.
+	(gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
+	gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
+	Remove old distribution building rules, now uses standard
+	distribution support in parent directory Makefile.in.
+
+Tue Jul 26 14:15:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c (push_target): Cast result from xmalloc.
+
+Tue Jul 26 18:20:46 1994  Paul Flinders  (ptf@smee)
+
+	* elfread.c (elf_symtab_read): Discard compiler labels generated
+	by the Solaris 2.1/Intel SunPro compiler.
+
+Mon Jul 25 18:19:24 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (nomemory):  Fix prototype and routine to take correct
+	args.
+
+Mon Jul 25 15:38:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (clean): Remove libgdb-files.
+
+Mon Jul 25 11:50:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coredep.c: Include inferior.h.
+
+Mon Jul 25 11:36:02 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c: Add support for NODE, PORT and BAUD command
+	  line arguments.
+
+Sat Jul 23 14:36:09 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* symfile.c (deduce_language_from_filename): Recognize .S as asm,
+	.cp as C++, alphabetize better.
+
+	* breakpoint.c (ignore, condition): Move usage note into body of
+	help text, so first line can be one-line summary.
+
+Sat Jul 23 00:58:15 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (unpush_target):  Fix handling of removal of top target.
+
+Fri Jul 22 17:30:39 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in: Add stuff to build nlmstub.
+	* Add rule for annotate.o to keep Sun make happy.
+	* configure.in:  Add config for powerpc/Netware.
+
+	* partial-stab.h (near N_SO):  Don't call START_PSYMTAB with null
+	filename.  This speeds up handling of trailing N_SO stabs (they
+	mark the end of a .o file).
+
+	* target.c, target.h:  Change the way pushing and popping of
+	targets work to support target overlays and inheritance.
+	* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
+	Fixup references to current_target, due to previous changes.
+
+	* config/i386/tm-i386nw.h:  Enable longjmp support.  More work is
+	needed to get the address of longjmp out of the target.
+
+Tue Jul 19 13:25:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* main.c: Include <ctype.h>.
+
+Mon Jul 18 15:32:17 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-mips.c (mips_readchar): Fix a bug in checking <IDT>
+	prompt.
+
+Mon Jul 18 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* solib.c (look_for_base): Don't deref exec_bfd if NULL.
+
+Sun Jul 17 15:38:36 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.12.4.
+
+Sun Jul 17 12:20:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* configure.in (m88*-harris-cxux*): New configuration.
+	* cxux-nat.c, config/m88k/cxux.mh, config/m88k/cxux.mt,
+	config/m88k/xm-cxux.h, config/m88k/tm-cxux.h, config/m88k/nm-cxux.h:
+	New files.
+	* config/m88k/tm-m88k.h: Add comment about Harris OS.
+	(TARGET_WRITE_PC): Pass pid through to register writers.
+
+	* configure.in (m68*): Put vendor-only-specified host configs
+	after vendor-and-os-specified configs.
+	(m68*-atari-sysv4*, m68*-cbm-sysv4*): Replace with m68*-*-sysv4.
+
+	* config/m88k/delta88.mh (MUNCH_DEFINE): Remove.
+	* config/m88k/delta88.mt, config/m88k/delta88v4.mh: Format
+	consistently.
+
+Sat Jul 16 23:39:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* elfread.c (elf_symtab_read):  Handle error return from
+	bfd_get_dynamic_symtab_upper_bound gracefully.
+
+Sat Jul 16 14:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inferior.h (ARCH_NUM_REGS): New macro, actual number of
+	registers in use by the inferior.
+	* coredep.c (fetch_core_registers, register_addr): Use it.
+	* findvar.c (registers_changed, registers_fetched,
+	read_register_bytes): Ditto.
+	* infcmd.c (do_registers_info, registers_info): Ditto.
+	* infptrace.c (fetch_inferior_registers,
+	store_inferior_registers): Ditto.
+	* stack.c (frame_info): Ditto.
+
+	* coredep.c (CORE_REGISTER_ADDR): New macro.
+	(fetch_core_registers): Use it.
+
+	* breakpoint.c (ignore, condition): Add usage notes to help strings.
+	* symfile.c (add-symbol-file): Add usage note to help string.
+	(add_shared_symbol_files_command): New command.
+
+	gcc -Wall lint.
+	* inferior.h (read_pc_pid): Declare.
+	* breakpoint.c (watchpoint_check): Cache breakpoint in local
+	variable b, remove unused variable other_type_used.
+	* main.c (inferior.h, call-cmds.h): Include.
+	(gdb_init): Declare.
+	* remote.c (remote_wait): Return 0 by default.
+
+Fri Jul 15 16:43:33 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Stop printing at null char option, from Oliver Meyer
+	(omeyer@i3.informatik.rwth-aachen.de).
+	* valprint.h, valprint.c (stop_print_at_null): New global.
+	* valprint.c (_initialize_valprint): New print set subcommand
+	"null-stop".
+	* c-valprint.c (c_val_print): If stop_print_at_null is on, and
+	printing a char	array, adjust the number of chars to print.
+
+Fri Jul 15 14:33:40 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+        From Kevin A. Buettner (kev@cujo.geg.mot.com).
+	* m88k-tdep.c (examine_prologue): Modified to handle prologues for
+	pic code in addition to prologues where an instruction from the
+	prologue gets moved into the delay slot of a branch instruction
+	immediately following the prologue.  A table of potential prologue
+	instructions (prologue_insn_tbl) is now used for picking apart a
+	function prologue.
+	(frame_find_saved_regs): Changed the way in which limit gets set
+	so that the delay slot of branch instructions immediately
+	following the prologue gets examined.
+	(pushed_size, store_parm_word, store_parm, push_parameters,
+	collect_returned_value):  Deleted.
+
+Fri Jul 15 01:06:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Handle stepping into leaf
+	functions whose prologue consists of gp loading code only.
+
+Thu Jul 14 14:22:12 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* dbxread.c: Don't include libbfd.h.
+	* dwarfread.c, elfread.c somread.c: Don't include libbfd.h,
+	<time.h>, or <sys/types.h>.
+	* elfread.c (elf_symfile_read): Use only standard BFD functions to
+	collect information about the stab and stab string sections.
+
+Thu Jul 14 13:17:39 1994  Kung Hsu  (kung@x1.cygnus.com)
+
+	* stabsread.c (read_huge_number): handle large unsigned number
+	for stabs generated by os9k C compiler.
+
+Wed Jul 13 18:58:15 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Breakpoint hit counts, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* breakpoint.h (hit_count): New breakpoint field.
+	* breakpoint.c (show_breakpoint_hit_counts): New variable.
+	(clear_breakpoint_hit_counts): New function.
+	(bpstat_stop_status): Increment the hit count.
+	(breakpoint_1): Display the hit count.
+	* infcmd.c (run_command): Reset breakpoint hit counts.
+	* target.c (generic_mourn_inferior): Don't clear ignore counts if
+	displaying hit counts.
+	
+Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* elfread.c (elf_symfile_read):  Unconditionally add dynamic
+	symbols for all symbol files.  Makes skipping over the
+	trampoline code work when stepping from a function in a shared
+	library into a function in a different shared library for Irix 5.
+	Other ELF targets do not have enough information in their
+	dynamic symbol tables to make this work.
+	(elf_symtab_read):  Relocate mst_solib_trampoline address.
+
+Mon Jul 11 16:38:49 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Atari support, from Uwe Seimet (seimet@chemie.uni-kl.de).
+	* configure.in (m68*-atari-sysv4*): New configuration.
+	(m68*-cbm-sysv4*): Use m68kv4 instead of amix.
+	* m68k-tdep.c (R_PS): Define as R_SR if necessary.
+	* config/m68k/m68kv4.mh, config/m68k/m68kv4.mt,
+	config/m68k/tm-m68kv4.h, config/m68k/xm-m68kv4.h: New files.
+	* config/m68k/amix.mh, config/m68k/amix.mt,
+	config/m68k/tm-amix.h, config/m68k/xm-amix.h: Removed, superseded
+	by m68kv4 files.
+
+Sat Jul  9 16:28:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (find_function_start_sal):  New function to find
+	the start of a function from a function symbol.
+	(decode_line_1, decode_line_2):  Use it instead of open coded
+	partial copies of the code.
+	(list_symbols):  Quote symbol name before passing it to
+	break_command to enable proper handling of mangled symbols.
+
+Wed Jul  6 20:22:07 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y (match_simple_name_string):  Don't lower-case here.
+	* ch-exp.y (yylex):  First try name lookup using exact name
+	typed by user;  if that fails, try lower-cased name.
+
+Wed Jul 06 12:39:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: More cleanups.  Delete lots of trailing whitespace.
+	Remove some items from the TODO list and notes throughout code
+	for things which need fixing.  Add more comments.
+	Document bogus struct symloc sharing with dbxread.c.  Delete more
+	useless variables.  Add more PARAM prototypes.  Fixup more
+	indention problems that have crept in.
+	(SET_NAMESTRING): Accept new namep and objfile arguments so that
+	it doesn't depend on the variable names on the procedures it's
+	used from.  
+	(hpread_symfile_init): Delete incorrect checks for bogus sizes of
+	the debug sections.
+
+Wed Jul  6 00:48:57 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c, elfread.c, mipsread.c, nlmread.c, os9kread.c:
+	Move "no debugging symbols found" test to symfile.c.
+	* symfile.c (syms_from_objfile, reread_symbols):  Add
+	"no debugging symbols found" test.
+	* coffread.c (init_stringtab):  Handle stripped files with a
+	stringtab offset of zero gracefully.
+	* osfsolib.c (solib_create_inferior_hook):  Use DYNAMIC flag from
+	BFD instead of stop_pc heuristic to determine if it is a dynamically
+	linked object file.
+	* procfs.c (wait_fd):  Handle ENOENT error return from PIOCWSTOP
+	ioctl, it indicates that the process has exited.
+
+Mon Jul 04 19:48:03 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_symfile_init): Make sure to initialize all the
+	private data to zero.  Not having any HP C debug symbols is not an
+	error.  Just return.
+
+Mon Jul  4 19:28:56 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): ELF unwind information is in the
+	.PARISC.unwind section now.
+
+Mon Jul  4 17:06:26 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* breakpoint.c (mention): Always show breakpoint address if no
+	source file.
+
+Sat Jul  2 01:51:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* solib.c (bfd_lookup_symbol, look_for_base):  Reinstate to reenable
+	handling of shared libraries for non-ELF executables, but only if
+	HANDLE_SVR4_EXEC_EMULATORS is defined.
+	(locate_base):  Try to find debug_base in the dynamic linker
+	for non-ELF executables if HANDLE_SVR4_EXEC_EMULATORS is defined.
+	* config/sparc/tm-sun4sol2.h (HANDLE_SVR4_EXEC_EMULATORS):
+	Define to enable handling of shared libraries for a.out executables,
+	run under Solaris BCP.
+
+Fri Jul 01 19:50:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Change contribution notice to the Cygnus/Utah agreed
+	upon notice.  Delete some stuff from the TODO list.  Rework
+	many comments to be clearer.  Major cleanups.  Consistently
+	use "hpread_" prefix.  Delete unnecessary macros, structures
+	variables, fiels, functions and #if 0 code.  Mark code which
+	still needs to be cleaned up.  PARAMize and make most functions
+	static. Fix error checking when reading in the debug section
+	contents.  No more minimal symbol table handling in this code!
+
+Thu Jun 30 13:59:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Print "Program exited normally"
+	regardless of batch_mode.
+	* defs.h, top.c (batch_mode): Removed.
+
+Wed Jun 29 18:53:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (dcache_h): Remove redundant definition.
+	(init.c): Add a comment.
+	(top.c): Remove explicit compile action.
+	* breakpoint.c (mention): Share code indicating location of
+	break/watchpoints, don't print address if addressprint is off.
+	* breakpoint.c, c-typeprint.c, c-valprint.c, energize.c, symtab.h
+	(demangle): Remove redundant declarations.
+	* eval.c: Remove redundant function declarations.
+	* objfiles.h: Cosmetic and grammatical improvements.
+	* TODO: Various updates.
+
+	* remote-mips.c: Replace all \r chars with \015.
+	(mips_receive_header): Display control characters readably.
+	(mips_xfer_memory): Add a simple progress display.
+
+Wed Jun 29 13:11:45 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
+
+	* remote-e7000.c (e7000_open): Don't try a tcp open if we're
+	using go32.
+	* remote-hms.c (flush): New function.
+	(expect): Get edge case right.
+	(hms_read_inferior_memory): Be more tolerant of line noise.
+
+Tue Jun 28 14:17:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Use i386m3.mh and i386m3.mt as names of host and
+	target files, not non-existent mach3.mh and mach3.mt.
+
+Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (dbx_symfile_read):  Unconditionally add dynamic
+	symbols for all symbol files.  Makes skipping over the
+	trampoline code work when stepping from a function in a shared
+	library into a function in a different shared library.
+	(read_dbx_dynamic_symtab):  Relocate mst_solib_trampoline address.
+
+Tue Jun 28 15:28:01 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* dbxread.c, partial-stab.h (near N_SO):  SO stabs with blank
+	names mean end of .o file.
+	* infrun.c (wait_for_inferior):  Clean up multi-thread logic near
+	top of routine.  Handle new thread notification cleanly.
+	* lynx-nat.c (child_wait):  General cleanups, handle new LynxOS
+	thread notification scheme.
+	* (child_resume):  General cleanups, handle resumption of all
+	threads properly.
+
+Mon Jun 27 09:57:23 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
+
+	* ser-go32.c: Rewrite to run under windows.
+	* ser-e7kpc.c: New file to support the E7000 with the PC ISA
+	bus interface.
+	* serial.c (serial_open): Notice device "pc".
+	* remote-e7000.c: Fix copyright date.
+	(expect): Compare \n and \r the same.
+	(e7000_open): Allow pc as a serial port
+	* sh/sh.mt: Add ser-e7kpc.
+	* h8300/h8300hms.mt: Add ser-e7kpc.
+	* main.c (proc_wait): Don't wait if using go32.
+
+Mon Jun 27 00:35:51 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c: Simplify by using stabsect_build_psymtabs.
+	* dbxread.c (stabsect_build_psymtabs): New argument "text_name"
+	corresponding to the name of the text section.  All references
+	changed.
+	(somstab_build_psymtabs): Delete function, no longer needed.
+
+Sun Jun 26 23:54:08 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c: Renamed from paread.c.  Changed function names and
+	comments to reflect that this file deals with SOM (an object file
+	format), rather than the PA (a cpu).
+	(Makefile.in): Chaned appropriately.
+	(config/pa/hppabsd.mh, config/pa/hppahpux.mh): Likewise.
+	* dbxread.c (somstab_build_psymtabs): Renamed from
+	pastab_build_psymtabs.
+
+Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* core-sol2.c:  New file to handle ELF and BCP core file flavours.
+	* config/sparc/sun4sol2.mh (NATDEPFILES):  Use it instead of
+	core-svr4.
+	* Makefile.in:  Updated for core-sol2.c.
+	* README:  Add notes about SPARCworks cc under Solaris 2.x,
+	from Casper H.S. Dik (casper@fwi.uva.nl).
+	* config/mips/xm-makeva.h:  Removed, no longer necessary.
+	* Makefile.in, config/mips/xm-irix3.h, config/mips/xm-irix5.h,
+	config/mips/xm-mips.h, config/mips/xm-news-mips.h,
+	config/mips/xm-riscos.h:  Remove references to xm-makeva.h
+
+Wed Jun 22 17:48:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdba.el: Put program input and output in a separate buffer.
+
+Wed Jun 22 16:54:15 1994  Fred Fish  (fnf@cygnus.com)
+
+	* energize-patches, main.c (main), top.c (gdb_init, pwd_command),
+	top.h: Change all occurances of dirbuf to gdb_dirbuf.  Collides
+	with global variable of same name in libnsl.so on UnixWare.
+
+Wed Jun 22 14:40:52 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* symtab.c (decode_line_1): fix a bug in dealing with '<>'
+	embedded in template name.
+
+Tue Jun 21 14:06:46 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* config/i386/nm-linux.h: change calling convention of 
+	TARGET_CAN_USE_HARDWARE_WATCHPOINT() and
+	target_insert_watchpoint() and
+	target_remove_watchpoint().
+
+	* config/mips/tm-mips64.h: define FORCE_LONG_LONG to force LONGEST
+	to be long long in gdb.
+	* config/mips/tm-bigmips.h: ditto.
+
+Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-lang.c (asm_language_defn):  New definitions for language_asm,
+	mostly copied from c_language_defn, to avoid warnings when
+	switching between c and asm stack frames.
+
+Mon Jun 20 13:51:55 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+	* mdebugread.c (parse_symbol): Don't call ecoff_swap_tir_in or
+	ecoff_swap_rndx_in directly; use the debug_swap pointer instead.
+	(upgrade_type, handle_psymbol_enumerators): Likewise.
+	(has_opaque_xref, cross_ref): Likewise.
+	(elfmdebug_build_psymtabs): Call swap->read_debug_info to read
+	debugging information, rather than doing it here.
+	* mipsread.c (mipscoff_symfile_read): Call read_debug_info entry
+	point in ecoff_debug_swap backend structure, rather than calling
+	ecoff_slurp_symbolic_info directly.
+
+Fri Jun 17 20:58:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c: Include annotate.h.  Call annotate_field rather
+	than printing annotation directly.
+
+	* main.c: Include string.h.
+
+Thu Jun 16 14:41:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* fork-child.c (startup_inferior) [STARTUP_INFERIOR]: If defined,
+	call it instead of doing normal loop.
+	* infcmd.c (attach_command): Don't call wait_for_inferior if
+	running	Mach 3.
+	* infrun.c (proceed) [PREPARE_TO_PROCEED]: If defined, call
+	hook that can decide whether to step over the next breakpoint.
+	* utils.c (wrap_here): Abort if wrap_buffer not allocated.
+	(request_quit) [REQUEST_QUIT]: If defined, call it instead of
+	doing normal quit.
+
+	* configure.in: Improve sorting/formatting of hosts and targets.
+	(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
+	m88*-*-mach3*, ns32k-*-mach3*): Recognize.
+	* Makefile.in (stop-gdb): New target.
+	* stop-gdb.c: New file, utility to get attention of waiting GDBs
+	in Mach 3.
+
+Wed Jun 15 00:41:03 1994  Tom Lord  (lord@rtl.cygnus.com)
+
+	* top.c (gdb_init): Init current_directory in gdb_init.  Probably
+	the identical initialization can be deleted from main.c, but i
+	haven't done so just in case.
+
+Tue Jun 14 17:24:41 1994  Tom Lord  (lord@x1.cygnus.com)
+
+	* gdba.el: Added menu windows and slightly improved window
+	handling to gdba.el.  Fixed numerous minor bugs that were causing
+	emacs and gdb to fall out of sync.
+
+Tue Jun 14 16:18:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* breakpoint.c: annotate changes lost at merge, put back in.
+
+Mon Jun 13 17:28:50 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/i386sco.mh, i386sco4.mh (XDEPFILES): Remove
+	i387-tdep.o.
+
+Sun Jun 12 03:51:52 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/m68k/dpx2.mh (NATDEPFILES):  Remove duplicate inclusion
+	of inftarg.o.
+	* config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER):  Define to inhibit
+	writing of floating registers, the dpx2 kernel disallows it.
+	* irix5-nat.c (LM_ADDR):  The loaded address of the shared library
+	is contained in o_praw.
+	* irix5-nat.c (solib_map_sections):  Adjust sections by the
+	difference between the loaded address and the prelinked address.
+	* irix5-nat.c (solib_address):  Use LM_ADDR for the loaded start
+	address.
+	* mdebugread.c (parse_symbol):  Do not relocate stEnd/scText
+	symbols, their value is absolute.
+	* mdebugread.c (parse_partial_symbols):  Handle Irix 5.2 shared
+	libraries fh->adr fields of zero. Relocate minimal symbol values
+	upon readin. Relocate non-stabs symbols upon readin.
+	* mdebugread.c (psymtab_to_symtab_1):  Use pst->textlow for the
+	start address of the outermost block.
+	* mdebugread.c (parse_lines, parse_procedure):  Pass in pst
+	instead of section_offsets and use relocated pst->textlow for
+	line number and procedure address relocations.
+
+	From gmo@MicroUnity.com (Guillermo A. Loyola):
+	* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
+	Handle SGI Irix5 stIndirect symbol type.
+
+Fri Jun 10 14:52:56 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* breakpoint.c: fix a syntax error native cc does not like.
+
+	* Makefile.in: change sparclite-tdep.c to sparcl-tdep.c.
+	* sparclite/Makefile.in: ditto.
+	* sparcl-tdpe.c: change file name because first 8 chars has to be 
+	unique.
+	* sparcl-stub.c: ditto.
+
+	* sparclite/Makefile.in: fix INCLUDE_CFLAGS to have {srcdir}/../config.
+
+Fri Jun 10 10:38:15 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (target_read_pc, target_write_pc): Accept (and
+	ignore) a PID argument.
+	(hppa_pop_frame): Pass a PID to target_write_pc.
+	* config/pa/tm-hppa.h (TARGET_READ_PC, TARGET_WRITE_PC): Accept
+	and pass through a PID argument.
+	(target_read_pc, target_write_pc): Update prototypes.
+
+Thu Jun  9 18:10:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* Makefile.in: add new file sparclite-tdep.c.
+	* sparclite/Makefile.in: add new file sparclite-stub.c.
+	* sparclite/hw_breakpoint.note: note for SPARClite hardware breapoint
+	support.
+	* config/sparc/sparclite.mt: add sparclite-tdep.o.
+	* config/sparc/tm-sparclite.h: add hardware breakpoints support 
+	defiines and code.
+	* sparclite-tdep.c: new file, contains hardware breakpoint support
+	code.
+	* sparclite-stub.c: new file, stub code that add support hardware
+	breakpoint support.
+	* breakpoint.c: add hardware breakpoint support.
+	* breakpoint.h: add new breakpoint type to support hardware
+	breakpoint.
+	* config/mips/nm-irix4.h: change interface for target dependent
+	code supporting watch point.
+	* config/pa/nm-hppab.h: change interface for target dependent
+	code supporting watch point.
+
+Thu Jun  9 14:59:58 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-os9k.c (rombuf_command): fix a bug accepting rombug
+	output.
+	* stabsread.c (read_struct_fields): os9k nested structure does not
+	have terminating ';', instead it just get to ',' and bit position
+	and length.
+
+Wed Jun  8 23:20:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlmread.c (nlm_symtab_read):  Clean up a bit.
+	* (nlm_symfile_read):  Record bounds of main() so that backtrace
+	command will know where to stop.
+	* objfiles.c (objfile_relocate):  Relocate entry point/func info
+	for backtrace as well.
+	* objfiles.h:  Define values for invalid PCs for entry point info.
+	* symfile.c (init_entry_point_info):  Initialize invalid values
+	with aforementioned macros.
+	* config/alpha/tm-alphanw.h:  Turn on FRAME_CHAIN_VALID_ALTERNATE
+	to cause backtrace to stop when it gets back to main().
+	* config/i386/tm-i386nw.h:  Ditto.
+
+Sat Jun  4 18:17:03 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Fix value_print, which used to be ostensibly language-independent,
+	but would print pointers and arrays in C syntax.  Instead, call
+	a language-specific function.
+	* language.h (struct language_defn):  New functional field
+	la_value_print.
+	(LA_VALUE_PRINT):  New macro.
+	* language.c (unk_lang_value_print):  New stub/dummy function.
+	(unknown_language_defn, auto_language_defn, local_language_defn):
+	Use it.
+	* c-valprint.c (c_value_print):  New function, with code moved from:
+	* valprint.c (value_print):  ... here.  Now just invoke
+	LA_VALUE_PRINT to do language-specific stuff.
+	* valprint.c (value_print_array_elements):  Make non-static.
+	* c-lang.c (c_language_defn, cplus_language_defn):  Add
+	c_value_print in the la_value_print field.
+	* m2-lang.c (m2_language_defn):  Likewise.
+	* ch-lang.c (chill_language_defn):  But here use chill_value_print.
+	* ch-valprint.c (chill_val_print):  Print null pointer as NULL.
+	* ch-valprint.c (chill_value_print):  New function, based on
+	c_value_print, but use Chill "look and feel."
+	* c-lang.h (c_value_print):  New prototype.
+	* ch-lang.h (chill_value_print):  New prototype.
+	* value.h (value_print_array_elements):  New prototype.
+
+	* ch-valprint.c (chill_val_print, case TYPE_CODE_BITSTRING
+	and case TYPE_CODE_SET):  Check that the element type isn't a stub.
+
+Fri Jun  3 09:15:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c: Move entire file except for #ifndef MAIN_OVERRIDE code
+	to new file top.c.  Make things extern instead of static and
+	similar rearrangements to deal with this.
+	* top.h: New file.
+	* utils.c: Move fputs_unfiltered to main.c.  Remove 
+	FPUTS_UNFILTERED_OVERRIDE ifndef.
+	* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
+	and libgdb uses utils.c and top.c.
+
+Thu Jun  2 23:19:10 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Fix typo.
+
+Thu Jun  2 18:09:59 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-valprint.c (chill_val_print_array_elements):  New function.
+	A Chill version of val_print_array_elements, it prints the
+	array index labels, in additions ot the array element values.
+	(chill_val_print):  Use the new function.
+
+Thu Jun  2 08:50:00 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Add nlm subdir to configdirs for alpha-*-netware
+	target.
+	* defs.h (enum language):  Add language_asm.
+	* findvar.c (read_register_bytes read_register_gen
+	write_register_bytes read_register read_register_pid
+	write_register write_register_pid supply_register):  Move multi-
+	thread handling down into these routines.  Create XXX_pid routines
+	that allow register references to specify the pid.
+	* findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
+	read_sp write_sp read_fp write_fp):  Move these routines from
+	infcmd to findvar to centralize the whole mess.
+	* i386-nlmstub.c:  Portability fixes.
+	* infptrace.c (child_resume):  Conditionalize to allow other natives
+	to override it.  Remove PIDGET gubbish, it's no longer necessary.
+	* infrun.c (wait_for_inferior):  Put registers_changed() before
+	target_wait() to speed up remote debugging.
+	* Replace code that reads registers from other threads with much
+	nicer looking new function calls (see changes to findvar.c).
+	* Don't skip prologues if debugging assembly source.
+	* lynx-nat.c (child_resume):  Lynx now needs it's own version of
+	child_resume to handle multi-thread debugging properly.
+	* remote.c:  Add O response to get console output from target.
+	* (readchar): Add timeout parameter.  Handle SERIAL_EOF and
+	SERIAL_ERROR here to simplify callers.
+	* Change static var timeout to remote_timeout.
+	* (fromhex):  Remove unnecessary return -1 at end of routine.
+	* (remote_wait):  Turn this into a big switch statement.  Add
+	support for O response.
+	* (putpkt):  Remove unnecessary handling of SERIAL_EOF/ERROR.
+	* (getpkt):  Split getpkt into two parts.  read_frame deals with
+	all formatting issues, run-length encoding, and framing.  getpkt
+	now handles error recovery, and frame detection.
+	* ser-tcp.c (tcp_readchar):  Handle EINTR from read().
+	* ser-unix.c (hardwire_raw):  Set CLOCAL so that we ignore modem
+	control.  (hardwire_readchar):  Handle EINTR from read().
+	* symfile.c (deduce_language_from_filename):  Add support for .s
+	files.
+	* config/nm-lynx.h:  Define CHILD_WAIT so that lynx-nat.c can
+	override infptrace's child_wait.
+	* config/rs6000/rs6000lynx.mh:  Use xm-rs6000ly.h & nm-rs6000ly.h
+	instead of XXXlynx.h.
+	* config/rs6000/rs6000lynx.mt:  Use tm-rs6000ly.h instead of
+	tm-rs6000lynx.h.
+	* nlm/gdbserve.c:  Portability fixes.
+
+Tue May 31 20:35:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* inftarg.c (child_wait): Call proc_wait, not wait.
+	(child_mourn_inferior): Call proc_remove_foreign.
+	* main.c (gdb_init): Call init_proc.
+	* main.c: Provide dummy versions of init_proc, proc_wait, and
+	proc_remove_foreign for the gdb case (the libgdb case provides its
+	own versions of these functions).
+	* Makefile.in (libgdb-files): Add libproc.a.
+
+Wed Jun  1 11:08:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Hardware watchpoints for Linux, from Rick Sladkey
+	(jrs@world.std.com).
+	* infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add
+	new hardware breakpoint recovery method.
+	* i386v-nat.c (i386_insert_watchpoint,
+	i386_insert_nonaligned_watchpoint, i386_remove_watchpoint,
+	i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]:
+	New functions to support the 386 hardware debugging registers.
+	* config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT,
+	HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
+	target_insert_watchpoint, target_remove_watchpoint): Define these
+	macros to use the hardware debugging functions in i386v-nat.c.
+
+Wed May 25 17:06:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in: Replace libgdb.a with libgdb-files.  Make "all"
+	build it.
+
+Thu May 19 09:56:20 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c, target.h: New variables target_activity_function and
+	target_activity_fd.
+	* inflow.c, inferior.h: New functions set_sigio_trap and
+	clear_sigio_trap.
+	* inftarg.c (child_wait), procfs.c (wait_fd): Call them.
+
+Wed May 18 13:01:55 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.h (sim_verbose): Delete.
+	Document callbacks needed.
+	(sim_*): Change result to void where there isn't one.
+	(sim_open): Clarify argument and error response.
+	(sim_close): Declare.
+	(sim_load): Change bfd_handle argument to file name.  Clarify result.
+	(sim_create_inferior): Renamed from sim_set_args.
+	(sim_set_pc): Delete.
+	(sim_info): Delete printf_fn argument.
+	* remote-sim.c (gdbsim_kill): Add comment describing purpose.
+	(gdbsim_load): Try sim_load first.
+	(gdbsim_create_inferior): Call sim_create_inferior.
+	(gdbsim_open): Handle args == NULL.  Update call to sim_open.
+	(gdbsim_close): Call sim_close.
+	(gdbsim_files_info): Update call to sim_info.
+	(gdbsim_ops): Realign comments.
+
+	* printcmd.c (decode_format): Allow TARGET_PTR_BIT to be non-constant.
+
+Tue May 17 16:45:20 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use
+	the auxent if the symbol's name is ".file".  From David Edelsohn 
+	<c1dje@watson.ibm.com>.
+
+Tue May 17 11:08:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Fix typo.
+
+	* annotate.c (annotate_field_end): Fix typo.
+
+	* Makefile.in: Move annotate.o from COMMON_OBS to OBS.
+
+	* Makefile.in (TSSTART): Remove; no longer used.
+
+	* utils.c (vfprintf_maybe_filtered, vfprintf_unfiltered): Call
+	fputs_unfiltered and exit directly, rather than fatal.  The latter
+	calls vfprintf_unfiltered!
+
+	* gdbtypes.h, gdbtypes.c (can_dereference): New function.
+	* value.h, printcmd.c (print_value_flags): Move from here...
+	* annotate.c: ...to here, and make it use can_dereference.
+
+Sat May 14 15:13:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inflow.c (job_control, attach_flag, generic_mourn_inferior):
+	Remove, needed for both native and cross.
+	* target.c (attach_flag, generic_mourn_inferior): Put here.
+	* utils.c (job_control): Put here.
+	(terminal.h): Don't include anymore.
+
+Sat May 14 09:11:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* source.c (find_source_lines): Always use code that was #ifdef
+	BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
+	leaving it on the chain.  Reindent much of this function.
+	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
+	config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
+	config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
+	config/ns32k/xm-ns32km3.h: Remove all references to
+	BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
+	* main.c, fork-child.c, many config files: Remove all
+	SET_STACK_LIMIT_HUGE code; with the above changes it should no
+	longer be needed.
+
+	* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
+	This avoids __eprintf troubles.
+
+Fri May 13 08:10:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
+	initialization code which needs to be called even if we bypass the
+	command line stuff into gdb_init.
+	* utils.c (fputs_unfiltered): Surround in #ifndef
+	FPUTS_UNFILTERED_OVERRIDE.
+	* Makefile.in (libgdb.a): New target.
+
+	* utils.c: Rearrange I/O stuff a bit so that all output goes
+	through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
+	which made %s not work with arbitrarily large strings.
+	* printcmd.c (printf_command): Use printf_filtered, not
+	printf_unfiltered and printf, now that arbitrary limit is gone.
+
+	gcc -Wall lint:
+	* breakpoint.c (watchpoint_check): Remove unused variable b.
+	* stack.c (print_frame_info): Move sp and buf inside #if.
+	* eval.c (evaluate_subexp): Remove unused variables pp,
+	mangle_ptr, ptr, and mangle_tstr.
+	* valarith.c (value_x_binop): Remove unused variables mangle_tstr
+	and mangle_ptr.
+	* symtab.c (lookup_symtab): Put variable copy inside #if.
+	(decode_line_1): Put variable q1 inside #if 0.
+	* target.h: Declare target_link.
+	* infrun.c (wait_for_inferior): Remove unused variables signame.
+	* remote.c (remote_resume): Remove unused variable name.
+	* c-exp.y (parse_number): Parenthesize operand of shift.
+	* dbxread.c (record_minimal_symbol): Parenthesize operand of &&
+	(this is a semantic change, the warning seems to have detected a bug).
+	* dbxread.c (end_psymtab): Move variable p1 inside #if.
+	* coffread.c: Move variable temptype inside #if.
+	* ch-typeprint.c (chill_type_print_base): Remove unused variable
+	name.
+	* ch-valprint.c: #include typeprint.h and ch-lang.h.
+	(chill_val_print): Remove unused variable in_range.
+	(chill_val_print): Remove statement "length > TYPE_LENGTH (type);".
+	(chill_val_print): Add default case for switch.
+	* stabsread.h: Declare stabsect_build_psymtabs.
+	* os9kread.c (read_minimal_symbols): Make this return void.
+	(os9k_symfile_read): Remove unused variables stb_exist and val.
+	(os9k_symfile_init): Remove unused variable val.
+	(fill_sym): Remove unused variable id.
+	(read_os9k_psymtab): Put variable back_to inside #if 0.  Remove
+	unused variable nsl.
+	Remove unused variable symfile_bfd.
+	#if 0 unused variables lbrac_unmatched_complaint and
+	lbrac_mismatch_complaint.
+	Remove declaration for non-existent function os9k_next_symbol_text.
+
+	* annotate.c, annotate.h: New files, containing a function for
+	each annotation which outputs it.
+	* Move breakpoints_changed from breakpoint.c to annotate.c.
+	* breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c,
+	printcmd.c, source.c, stack.c, utils.c, valprint.c:
+	Use annotate.c functions to output annotations.
+	* Makefile.in (OBS): Add annotate.o.
+
+Thu May 12 10:46:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): Make sure elf_unwind_size and
+	elf_unwind_entries are always initialized.
+
+	* hppa-tdep.c (skip_trampoline_code): Handle argument relocation
+	stubs which return directly to the caller rather than to the stub
+	itself.
+
+Wed May 11 20:11:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* c-exp.y (yyerror): Display a more informative error message.
+	* ch-exp.y (yyerror): Ditto, don't use global yychar.
+	* m2-exp.y (yyerror): Ditto.
+
+Tue May 10 11:57:53 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inflow.c (job_control): Move definition to front of file.
+
+Tue May 10 14:42:37 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to
+	SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd.
+
+Fri May  6 13:30:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (kdb): Remove old init.c creation commands.
+	* configure.in (sparclite): Match on sparclite*.
+	* sparclite/aload.c (main): Only change section addresses for
+	a.out format object files.
+
+Fri May  6 13:24:04 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* config/i386/go32.mh: Define CC.
+
+Fri May  6 11:56:54 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbserver/Makefile.in: Remove irrelevant definitions and
+	comments inherited from the gdb Makefile.
+	(BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile.
+	(VERSION): Update to 4.12.3.
+	(gdbserver): Remove any existing executable first.
+	(distclean, realclean): Remove nm.h.
+	* gdbserver/low-lynx.c: Add Sparc Lynx support.
+	* gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h):
+	Don't use absolute pathname.
+
+Thu May  5 12:00:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
+	error.
+
+Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
+	(print_it_normal): Add annotations for the inferior starting and
+	stopping, and for all the various messages related to how it
+	stopped.
+
+	* printcmd.c (do_one_display): Annotate.
+	* stack.c (print_frame_info): Annotate printing of stack frames.
+
+Wed May  4 18:15:51 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (get_offsets):  Handle case where stub doesn't support
+	qOffsets message.
+
+Wed May  4 15:30:39 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Add partial support for g++ code compiled with -fvtable-thunks.
+	* c-valprint.c (c_val_print):  Add vtblprint support
+	when using thunks.
+	* cp-valprint.c (cp_is_vtbl_member):  A vtable can be an array of
+	pointers (if using thunks) as well as array of structs (otherwise).
+	* cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name):  Move to global
+	level, and make the latter non-static (so define_symbol can use it).
+	* stabsread.c (define_symbol):  If the type being defined is a
+	pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
+	* symtab.h (VTBL_PREFIX_P):  Allow "_VT" as well as "_vt".
+	* values.c (value_virtual_fn_field):  Handle thunks.
+	* values.c (value_headof):  Minor efficiency hack.
+	* values.c (value_headof):   Incomplete thunk support.  FIXME.
+
+Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valprint.c (print_longest): Clarify comment about use_local.
+	* printcmd.c, defs.h (print_address_numeric), callers in
+	symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
+	cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
+	exec.c: New argument use_local.
+	* source.c (identify_source_line): Use filtered output.  Use
+	print_address_numeric. 
+
+	* core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1),
+	language.c (type_error, range_error): Use filtered output.
+	* utils.c (error_begin): Update comment to tell people to use
+	filtered output.
+
+	* Makefile.in (HFILES_WITH_SRCDIR): List bfd.h.
+	(HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get
+	bfd.h.
+
+Tue May  3 07:41:33 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* procfs.c (procfs_wait): Reinstate code which deduces the signal
+	from the fault, #ifndef FAULTED_USE_SIGINFO.
+	* config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO.
+
+Fri Apr 29 18:15:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Annotate each field of the headers.
+	Explicitly annotate each record.
+
+Fri Apr 29 15:56:18 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* xcoffexec.c: Reformat to standards and lint.
+	(language.h): Include.
+	(exec_close): Declare arg "quitting".
+	(file_command): Declare arg "from_tty".
+	(map_vmap): Cast xmalloc result to PTR.
+	* rs6000-nat.c: Reformat to standards and lint.
+	(exec_one_dummy_insn): Use char array for saved instruction.
+	(fixup_breakpoints): Declare.
+	(vmap_ldinfo): Be more informative in fatal error messages.
+	(xcoff_relocate_symtab): Define to return void.
+	* xcoffsolib.h: Reformat to standards, improve comments.
+	* config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare.
+
+Thu Apr 28 08:40:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c, defs.h (error_begin): New function.
+	(quit): Print annotation before printing the error message.
+	* main.c (return_to_top_level): Print annotation before doing the
+	longjmp.
+	* symtab.c (decode_line_1): Call error not warning and then
+	return_to_top_level.  Call error_begin and printf_unfiltered
+	rather calling warning (before calls to return_to_top_level).
+	* core.c (memory_error): Use error_begin, printf_unfiltered,
+	print_address_numeric and return_to_top_level instead of error.
+	Cleans up a FIXME-32x64.
+	* language.c (type_error, range_error): Call error_begin
+	not just target_terminal_ours.
+
+	* dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info
+	directly, rather than via DBX_SYMFILE_INFO.  A cast on the left
+	side of an assignment is non-portable.
+
+	* utils.c (query): Change syntax of query annotations to be
+	consistent with other input annotations.
+	(prompt_for_continue): Likewise for prompt-for-continue annotation.
+
+Thu Apr 28 01:20:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (psymtab_to_symtab_1):  Do not call sort_blocks
+	for stabs symtabs.
+	* mips-tdep.c (mips_skip_prologue):  Handle prologues for functions
+	that have a stack frame size of 32k or larger (from Paul Flinders).
+	Remove #if 0'd code.
+
+Wed Apr 27 16:33:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition
+	for Lynx platforms that need it.
+	* config/nm-lynx.h (__LYNXOS): Define if not already defined.
+
+Wed Apr 27 16:01:37 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* procfs.c (procfs_wait): Use the signal from the pr_info rather
+	than trying to deduce it from the fault.
+
+Wed Apr 27 12:22:46 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* printcmd.c (print_address_symbolic): Initialize name to empty
+	string to avoid core dump if lookup fails.
+	* remote-e7000.c (printf_e7000debug): Error if target not open.
+
+Tue Apr 26 22:45:24 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* i386-nlmstub.c:  Update to be more in line with PIN stub.
+	* nlm/gdbserve.c (putDebugChar):  Install bug fix from i386-nlmstub.
+	* (hex2mem):  Init ptr.
+	* General cleanups to use ConsolePrintf, standard prologues, etc...
+
+Tue Apr 26 10:23:04 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* i386-nlmstub.c:  More changes to be compatible with remote.c.
+
+	* dbxread.c:  Move a bunch of strncmps out of process_one_symbol
+	into (the far less frequently called) dbx_symfile_read.
+
+	* i386-nlmstub.c:  An interim version till we get PIN for the x86.
+
+Tue Apr 26 09:50:45 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (record_minimal_symbol):  Record the section
+	associated with the symbol to make dynmaic relocation work.
+	* (dbx_symfile_read, process_one_symbol):  Fixes to work around
+	Solaris brain-damage which don't apply to relocatable object
+	files.
+	* (stabsect_build_psymtabs):  New routine to read stabs out of an
+	arbitrarily named section.
+	* nlmread.c (nlm_symtab_read):  Read ALL syms from the NLM, not just
+	globals.
+	* (nlm_symfile_read):  Call stabsect_build_psymtabs to read the
+	stabs out of the nlm.
+	* partial-stabs.h (cases 'f' & 'F'):  Fixes to work around Solaris
+	brain-damage which don't apply to relocatable object files.
+	* remote.c (putpkt):  Improve error reporting and error handling.
+	* (get_offsets):  Temporary kludge to force data & bss sections to
+	have the same relocation.
+	* stabsread.c (define_symbol, scan_file_globals):  Record section
+	info in sym.
+
+Sat Apr 23 19:05:52 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Annotate each field of output.  Add
+	FIXME-32x64 comment.
+
+Fri Apr 22 16:43:54 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Move call to flush_cached_frames
+	to after call to target_wait.  This means that flush_cached_frames
+	can call target_terminal_ours if it wants to.
+	* infrun.c (wait_for_inferior) [HAVE_NONSTEPPABLE_WATCHPOINT]: Add
+	comment about why the code is dubious.
+
+	* stabsread.c (read_type): Call read_type, not nonexistent
+	os9k_read_type.
+
+Fri Apr 22 14:25:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-os9k.c (rombug_fetch_registers): set trace mode
+	correctly.
+	* remote-os9k.c (rombug_read_inferior_memory): cache data in
+	buffer.
+	* os9kread,c (read_os9k_psymtab): process file symbol to truncate
+	extra info.
+	* os9kread.c (os9k_read_ofile_symtab): proper casting of args
+	passed to process_one_symbol.
+	* stabsread.c (read_type): process os9k functio prototype.
+
+Fri Apr 22 11:27:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* solib.c (symbol_add_stub): If so->textsection is NULL, don't
+	dump core.
+
+Thu Apr 21 07:45:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (prompt_for_continue): Annotate prompt.
+	(query): Annotate query.
+	* printcmd.c (print_frame_args): Change syntax of argument
+	annotation to make name and value part of a single group of
+	annotations, not two separate groups.
+	* cp-valprint.c (cp_print_value_fields): Likewise for fields.
+	* valprint.c (val_print_array_elements): Change syntax of
+	annotation to be more concise.
+	* main.c, defs.h (command_line_input): New argument tells what
+	string to include in the annotations.
+	* symtab.c (decode_line_2), main.c (read_command_lines,
+	command_loop): Change callers.
+
+	* breakpoint.c (watch_command): Use (CORE_ADDR)0, not NULL, for
+	target null pointer.
+	* blockframe.c (find_frame_addr_in_frame_chain): Likewise.
+
+	* printcmd.c (output_command): Annotate things we print here too.
+	* printcmd.c (print_command_1): Add "value-history-value" annotation.
+	* Move declaration of print_value_flags from defs.h to value.h.
+	* main.c (command_line_input): Call wrap_here as well as gdb_flush.
+
+Thu Apr 21 09:29:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab):  Reinstall support for sun3,
+	BFD handles sun3 dynamic relocations now.
+	* elfread.c (elf_symtab_read, elf_symfile_read):  Handle dynamic
+	symbol table.
+
+Wed Apr 20 19:41:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_command_1): Annotate the top-level expressions
+	that we print.
+	(print_frame_args): Annotate each argument.
+	* printcmd.c, defs.h (print_value_flags): New function.
+	* cp-valprint.c (cp_print_value_fields): Annotate each field.
+	* valprint.c (val_print_array_elements): Annotate each array element.
+
+Wed Apr 20 13:18:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* findvar.c (read_var_value):  Handle LOC_REPARM_ADDR case correctly,
+	the register contains a pointer to the type, not the type itself.
+
+Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* main.c (main): Accept --annotate=N option and make --fullname
+	the same as --annotate=1.
+	(command_line_input): Print annotatation before and after prompt.
+	* blockframe.c (flush_cached_frames): Print annotation.
+	* Rename frame_file_full_name to annotation_level and move it from
+	symtab.h to defs.h.
+	* source.c (identify_source_line): If annotation_level > 1,
+	change output format.
+	* breakpoint.c: Print annotation whenever a breakpoint changes.
+	* main.c: New variable server_command.
+	(command_line_input): Parse "server " and set server_command.
+	(dont_repeat): Check server_command.
+
+Wed Apr 20 08:37:16 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_next_symbol_text): Don't return before
+	updating raw_symbol and symnum.  Return a value in the case where
+	we complained.
+
+	* dstread.c, coffread.c: Don't define pending_blocks; buildsym.c
+	takes care of it.
+	* parse.c: Don't define block_found; it is defined in symtab.c.
+	* parser-defs.h: Add comment regarding block_found.
+
+Tue Apr 19 09:46:05 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (internalize_unwind_info): Delete unused indexp
+	argument.
+
+Mon Apr 18 13:18:56 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab):  Relocate BFD symbols by
+	section vma. Do not read dynamic relocs for sun3 executables to
+	avoid BFD assertion message.
+
+Mon Apr 18 10:08:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* nm-hppab.h (KERNEL_U_ADDR): Define.
+	(FIVE_ARG_PTRACE): Likewise.
+	(CANNOT_STORE_REGISTER): Likewise.
+	* nm-hppah.h (KERNEL_U_ADDR): Define.
+	(FIVE_ARG_PTRACE): Likewise.
+	(CANNOT_STORE_REGISTER): Likewise.
+	(NEED_TEXT_START_END): Likewise.
+
+	* tm-hppah.h (NEED_TEXT_START_END): Delete definition.
+	* xm-hppah.h (KERNEL_U_ADDR): Delete definition.
+	(FIVE_ARG_PTRACE): Likewise.
+	* xm-hppab.h (KERNEL_U_ADDR): Delete definition.
+	(FIVE_ARG_PTRACE): Likewise.
+
+	* hppa-tdep.c (read_unwind_info): Make static.
+	(restore_pc_queue): Indirect through the target vector to
+	reload the register state.
+
+Sat Apr 16 22:20:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (compare_unwind_entries): Delete function.  It's been
+	moved into hppa-tdep.c.
+	(read_unwind_info): Likewise.
+	(pa_symfile_read): No longer call read_unwind_info.  The unwind
+	tables will be read in as they are needed.
+
+	* hppa-tdep.c (compare_unwind_entries): New function.
+	(read_unwind_info, internalize_unwinds): Likewise.
+	(find_unwind_entry): Read in unwind information on demand.
+
+Fri Apr 15 11:53:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* source.c (DIRNAME_SEPARATOR): New macro, replaces all references
+	to : in search path processing.
+	* defs.h (qsort): Rename argument in prototype.
+	* symtab.h (SAYMBOL_VALUE): Rename value field, avoids bugs in
+	some compilers.
+	* breakpoint.c, exec.c, mdebugread.c, mipsread.c, xcoffexec.c
+	(false): Eliminate usages.
+
+Fri Apr 15 11:35:19 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* h8500-tdep.c (initialize_h8500_tdep, large_command):
+	All references to value changed to value_ptrlage_command is now
+	called big_command.
+	All references to value changed to value_ptr.
+	* remote-e7000.c (e7000_wait): Use target_waitstatus and SETSTOP
+	* remote-hms.c (hms_wait): Timeout after five seconds.
+	* ser-go32.c (dosasync_read): Poll if timeout < 0.
+	* config/tm/tm-h8500.h (BEFORE_MAIN_LOOP_HOOK): Deleted.
+	* config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode.
+
+Thu Apr 14 07:01:56 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* procfs.c (procfs_wait): Protect watchpoint code with appropriate
+	#ifdefs.
+	(procfs_set_watchpoint, procfs_stopped_by_watchpoint): Likewise.
+
+Wed Apr 13 14:52:46 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.h (enum bptype): Add bp_hardware_watchpoint and
+	bp_watchpoint_scope breakpoints.
+	(struct breakpoint): Add val_chain and related_breakpoint fields
+	for use by watchpoints.
+
+	* breakpoint.c (within_scope): Delete.  No longer used.
+	(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
+	(target_{remove,insert}_watchpoint): Likewise.
+	(can_use_hardware_watchpoint): New function.
+	(remove_breakpoint): New function to remove a single breakpoint
+	or hardware watchpoint.
+	(insert_breakpoints): Handle insertion of hardware watchpoints.
+	Store a copy of the value chain derived from the watchpoint
+	expression.
+	(remove_breakpoints): Simplify by using remove_breakpoint.
+	(delete_breakpoint): Likewise.
+	(watchpoint_check): Delete the watchpoint and watchpoint scope
+	breakpoints when the watchpoint goes out of scope.  Save & restore
+	the current frame after checking watchpoints.
+	(breakpoint_init_inferior): Likewise (restarting the program
+	makes all local watchpoints go out of scope).
+	(bpstat_stop_status): Handle hardware watchpoints much like normal
+	watchpoints. Delete the watchpoint and watchpoint scope breakpoint
+	when the watchpoint goes out of scope.  Remove and reinsert all
+	breakpoints before returning if we stopped when a hardware watchpoint
+	fired.
+	(watch_command): Use a hardware watchpoint when possible.  If
+	watching a local expression, build a scope breakpoint too.
+	(map_breakpoint_numbers): Also call given function for any
+	related breakpoints.
+	(disable_breakpoint): Never disable a scope breakpoint.
+	(enable_breakpoint): Handle hardware breakpoints much like normal
+	breakpoints, but recompute the watchpoint_scope breakpoint's
+	frame and address  (if we have an associated scope breakpoint).
+	(read_memory_nobpt): Handle hardware watchpoints like normal 
+	watchpoints.  When necessary handle watchpoint_scope breakpoints.
+	(print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
+	(clear_command, breakpoint_re_set_one, enable_command): Likewise.
+	(disable_command): Likewise.
+
+	* blockframe.c (find_frame_addr_in_frame_chain): New function.
+	Extern prototype added to frame.h
+
+	* infrun.c (wait_for_inferior): Set current_frame and select
+	a frame before checking if we stopped due to a hardare watchpoint
+	firing.  Handle stepping over hardware watchpoints.
+	(normal_stop): Remove unnecessary call to select_frame.
+
+	* value.h (value_release_to_mark): Declare.
+	* values.c (value_release_to_mark): New function.
+
+	* procfs.c (procfs_wait): Add cases for hardware watchpoints.
+	(procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
+
+	* hppab-nat.c (hppa_set_watchpoint): New function.
+
+	* config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
+	(HAVE_STEPPABLE_WATCHPOINT): Define.
+	(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
+	(target_{insert,delete}_watchpoint): Define.
+
+	* config/mips/nm-irix4.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
+	(STOPPED_BY_WATCHPOINT, HAVE_NONSTEPPABLE_WATCHPOINT): Likewise.
+	(target_{insert,remove}_watchpoint): Likewise.
+
+Mon Apr 11 19:21:27 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab):  Ignore symbols of class C_EXT,
+	smtyp XTY_LD, sclass XMC_DS (external data segment label).  They
+	often have the same names as debug symbols for functions, and
+	confuse lookup_symbol().
+
+Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote.c: Around redefinition of PBUFSIZE, adjust whitespace.
+	* config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than
+	REGISTER_RAW_SIZE (1).
+	Together these changes work around a bug in HP's compiler.  Both
+	seem to be necessary.
+
+Mon Apr 11 09:18:24 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (pa_symtab_read): Handle ST_STUB symbols and symbols
+	with scope SS_EXTERNAL.  ST_ENTRY symbols in dynamic executables
+	are type mst_solib_trampoline.
+
+Fri Apr  8 17:14:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/es1800.mt: Change comments.
+
+Fri Apr  8 17:14:37 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* config/m68k/monitor.mt (TDEPFILES): Don't include remote-es.o.
+
+Fri Apr  8 15:35:30 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c:  Restore regmap structure for SPARC.  It's needed
+	for core files.
+
+Fri Apr  8 14:53:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* values.c (unpack_long): Remove obsolete comment about using a
+	switch statement.
+
+	* symfile.c (symbol_file_command): Add comments about command syntax.
+
+Thu Apr  7 17:25:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  Jim Kingdon  (kingdon@cygnus.com)
+
+	* infrun.c (IN_SOLIB_TRAMPOLINE):  Correct comment, trampolines
+	are in the .plt section.
+	* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
+	find_solib_trampoline_target):  New functions for handling
+	stepping into -g compiled shared libraries.
+	* symtab.h (lookup_solib_trampoline_symbol_by_pc,
+	find_solib_trampoline_target):  Add prototypes.
+	* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
+	Define to handle stepping into  -g compiled shared libraries.
+	* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE):  Define to handle
+	stepping into  -g compiled shared libraries.
+
+Thu Apr  7 17:22:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* configure.in:  Add mips-*-sysv4* support.
+	* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
+	config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
+	New files for MIPS SVR4 support.
+	* Makefile.in:  Update for new mipsv4 files.
+	* alpha-tdep.c (heuristic_proc_desc, find_proc_desc):  Use
+	read_next_frame_reg to obtain the frame relative stack pointer.
+	* mips-tdep.c (heuristic_proc_desc):  Use read_next_frame_reg to
+	obtain the frame relative stack pointer.
+	* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
+	Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
+	by entering them into the minimal symbol table.
+	* printcmd.c (print_scalar_formatted):  Do not try to unpack to
+	a long for float formats.
+	* solib.c:  Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
+	get defined in <link.h>.
+	* solib.c (solib_add):  Add shared library sections to the section
+	table of the target before adding the symbols.
+	* partial-stab.h:  Relocate static and global functions.
+	* dbxread.c (read_dbx_symtab):  Remove unused variable
+	end_of_text_address.  Relocate text_addr when passing it
+	to end_psymtab.
+
+	For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run. Retrieve dynamic
+	symbols from stripped executables.
+	* mipsread.c (read_alphacoff_dynamic_symtab):  New function.
+	* mipsread.c (mipscoff_symfile_read):  Use it. Issue warning message
+	if no debugging symbols were found.
+	* alpha-tdep.c (alpha_skip_prologue):  Silently return the unaltered
+	pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
+	is defined.
+	* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS):  Define,
+	OSF/1 has shared libraries.
+
+Thu Apr  7 15:11:11 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes
+	to BFD handling of dynamic symbols.
+
+Tue Apr  5 15:29:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label,
+	then gets its real address into FUN and its GOT/DP value into %r19.
+
+	* tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary.
+
+	* hppa-tdep.c (frameless_function_invocation): If no unwind
+	descriptor was found, then assume this was not a frameless
+	function invocation.
+	(frame_saved_pc): If the saved PC is in a linker stub, then
+	return the return address which the linker stub will return to.
+
+        * xm-hppab.h: Never define USG.
+        * xm-hppah.h: Always define USG.
+
+Tue Apr  5 12:58:47 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* values.c (unpack_long, value_from_longest),
+	valarith.c (value_binop):  Allow TYPE_CODE_RANGE.
+
+Fri Apr  1 14:04:34 1994  Jason Merrill  (jason@deneb.cygnus.com)
+
+	* symfile.c (deduce_language_from_filename): .cpp is a C++ extension.
+
+Fri Apr  1 00:44:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	For SVR4 targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run.
+	* elfread.c (elf_symtab_read):  Handle symbols for shared library
+	functions.
+	* sparc-tdep.c (in_solib_trampoline):  Renamed to in_plt_section
+	and moved to objfiles.c.
+	* objfiles.c (in_plt_section):  Moved to here from sparc-tdep.
+	* config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE):  Use new in_plt_section.
+	* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE):  Removed,
+	the new generic definition from tm-sysv4.h works for Solaris.
+
+Wed Mar 30 16:14:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* elfread.c (elf_symtab_read): Change storage_needed,
+	number_of_symbols and i to long.  Rename get_symtab_upper_bound to
+	bfd_get_symtab_upper_bound.  Check for errors from
+	bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
+	* nlmread.c (nlm_symtab_read): Same changes.
+
+Wed Mar 30 11:43:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_next_symbol_text): New function.
+	(read_xcoff_symtab): Set next_symbol_text_func to it.
+	Move raw_symbol outside of read_xcoff_symtab.
+
+	* remote.c (getpkt): Remove unused "out" label.
+
+Wed Mar 30 09:15:42 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.c (print_it_normal): Allow GDB to notify the user
+	about more than one watchpoint being triggered.
+
+Wed Mar 30 08:24:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h.
+
+Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (find_pc_partial_function):  mst_file_text
+	symbols do not live in the shared library transfer table.
+	* ch-exp.y (decode_integer_value, match_character_literal,
+	match_bitstring_literal):  Guard tolower calls with isupper,
+	tolower on old BSD systems blindly subtracts a constant.
+	* dbxread.c (read_ofile_symtab):  Check for __gnu_compiled_* as
+	well when determining the producer of the object file.
+	* mdebugread.c (has_opaque_xref):  New function to check for
+	cross reference to an opaque aggregate.
+	* mdebugread.c (parse_symbol, parse_partial_symbols):  Do not
+	enter typedefs to opaque aggregates into the symbol tables.
+	* mdebugread.c (parse_external):  Remove skip_procedures argument,
+	it has always been 1.  Remove code that handled stProc symbols,
+	it was never executed and was wrong, as the index of a
+	stProc symbol points to the local symbol table and not to the
+	auxiliary symbol info. Update caller.
+	* mdebugread.c (parse_partial_symbols):  Do not enter external
+	stProc symbols into the partial symbol table, they are already
+	entered into the minimal symbol table.
+	* config/i386/tm-symmetry.h:  Clean up, it is now only used for Dynix.
+	Remove all conditionals and definitions for ptx.
+	I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
+	Fix addresses of floating point registers in REGISTER_U_ADDR.
+	STORE_STRUCT_RETURN now handles cc and gcc conventions.
+	FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
+	IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
+	signal trampoline code work.
+	* config/i386/xm-symmetry.h:  Clean up, it is now only used for Dynix.
+	Remove all conditionals and definitions for ptx.
+	Remove KDB definitions.
+	* symm-nat.c (store_inferior_registers):  Fetch registers before
+	storing them to obtain valid floating point control registers.
+	Store fpu registers.
+	* symm-nat.c (print_1167_control_word):  Dynix 3.1.1 defines
+	FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
+	* symm-nat.c (fetch_inferior_registers, child_xfer_memory):
+	Fix typos.
+	* symm-nat.c (child_resume):  Update type of `signal' parameter.
+	* symm-tdep.c (I386_REGNO_TO_SYMMETRY):  Moved to tm-symmetry.h.
+
+Tue Mar 29 23:01:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for
+	calling import stubs for functions in shared libraries.
+
+Tue Mar 29 21:14:04 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y:  Implement SIZE(mode_name) and SIZE(expression).
+
+	* ch-lang.c (chill_is_varying_struct):  Magic string is
+	was "<var_length>" is now "__var_length" (more portable).
+
+Tue Mar 29 19:41:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c (getpkt): If we get a timeout, actually retry rather
+	than just giving up the first time it happens.
+	* remote.c: Document sequence numbers.
+	(remote_store_registers): Change syntax of 'P' request so that it
+	never looks like a sequence number.
+
+Tue Mar 29 16:06:01 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c (record_minimal_symbol): add section_offset to
+	relocate minimal symbol table.
+	* os9kread.c (read_minimal_symbols): ditto.
+	* os9kread.c (os9k_symfile_init): increase size of dbg and stb
+	file names.
+	* os9kread.c (read_os9k_psymtab): if there's no dbg file, just
+	return. Also if file addr is 0 leave it 0, not to relocate.
+	* remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
+	'set remotexoff' and 'set remotelog' commands.
+
+Tue Mar 29 12:38:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c (remote_store_registers): Add 'P' request to set an
+	individual register.
+	(remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print
+	a target address.
+
+Sat Mar 26 07:05:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG.
+	* stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to
+	combining all 'p' and 'r' pairs into a LOC_REGPARM.
+
+	* command.c (do_setshow_command, case var_string): Never add a
+	space to the end of the string.
+	* NEWS: Document this change.
+	* .gdbinit: Add a space to the "set prompt" command.
+
+Fri Mar 25 12:40:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	*  m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor
+	changes to make it compile (it doesn't link yet).
+
+	* buildsym.c (start_subfile, patch_subfile_names), demangle.c
+	(set_demangling_style, set_demangling_command): Use savestring not
+	strdup.  We were not dealing properly with a NULL return from
+	strdup, and were not declaring strdup (the system header may or
+	may not have it).
+
+	* valprint.c (val_print): Remove inaccurate comment about what
+	types can be stub types.
+
+	* config/i386/ptx.mh (XDEPFILES): Add coredep.o.  Delete infptrace.o.
+	* symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
+	Supply alternate version if ATTACH_DETACH is not defined.
+	* ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
+	tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
+	* configure.in: Recognize i[34]86-sequent-sysv4* host.
+
+Fri Mar 25 10:14:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_prologue): Do nothing if not at the beginning
+	of a function.
+	(skip_trampoline_code): Rewrite and add support for argument
+	relocation stubs stubs, import/export stubs, calls through
+	"_sr4export" and cascaded trampolines.
+
+	* hppa-tdep.c (skip_prologue): Return "pc" not zero
+	if no unwind descriptor is found.
+
+	* tm-hppa.h (NUM_REGS): Bump to 128 registers.
+	(REGISTER_NAMES): Add entries for "right-half" of FP registers.
+	(REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs
+	differently.  All registers are four bytes.
+	(REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are
+	the same size.
+	(REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs.
+
+	* hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP
+	registers as both single and double values (fetching 2nd 32bit half
+	as necessary).  Annotate each register printed with its precision.
+
+	* paread.c (read_unwind_info): Fix off-by-one error.
+
+Fri Mar 25 08:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (complete_command): Deal with it if arg is NULL.
+
+Thu Mar 24 07:12:09 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment
+	regarding using the PC--using the PC is necessary and all the
+	FIXME comments in the world won't make it go away.
+
+	* valops.c (value_at, value_at_lazy): Give error if we dereference
+	a pointer to void.
+	* gdbtypes.h: Fix comments regarding TYPE_CODE_VOID.
+	* stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types.
+
+	* stabsread.c (patch_block_stabs): Add comment about what happens
+	if the definition is in another compilation unit from the stab.
+
+	* dbxread.c (end_psymtab): Add comment about empty psymtabs.
+
+Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (complete_command): New command, from Rick Sladkey
+	<jrs@world.std.com>.
+	(symbol_completion_function): Don't declare rl_point and
+	rl_line_buffer; they are now declared in readline.h.
+	(show_commands): Don't declare history_base; it is declared in
+	history.h.
+	* command.c (lookup_cmd): Don't delete trailing whitespace.
+	Reverts change of 14 May 1989.
+
+Wed Mar 23 16:14:52 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* minsyms.c (prim_record_minimal_symbol):  Move section deduction
+	code from prim_record_minimal_symbol_and_info() to here.  Callers
+	of the latter can legitimately supply a section number of -1.
+
+Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h, gdbtypes.c: Add comments regarding whether static
+	member functions have an element in args for a (nonexistent) this
+	pointer.
+
+Tue Mar 22 20:12:53 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define.
+
+	* hppa-tdep.c (hppa_pop_frame): Do not restore the PC space
+	queue if NO_PC_SPACE_QUEUE_RESTORE is defined.
+
+	* stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument
+	for the structure's type.  All callers changed.
+
+	* valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
+	for each structure argument rather than assuming it's either
+	true or false for all structure arguments.
+
+	* config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
+	on the length structure passed, not the compiler used.
+
+	* config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
+	argument for the structure's type.
+
+Tue Mar 22 15:28:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* values.c (set_internalvar): Don't set var->value until we are
+	sure there won't be an error().
+
+	* remote.c (get_offsets): Reinstate comment which was in
+	remote_wait about use of SECT_OFF_TEXT and so on.
+
+Mon Mar 21 13:11:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symmisc.c (maintenance_check_symtabs):  New function to check
+	consistency of psymtabs and symtabs.
+	* symtab.h (maintenance_check_symtabs):  Add prototype.
+	* maint.c:  Add new `maint check-symtabs' command.
+	* config/i386/tm-i386aix.h, config/i386/tm-sun386.h,
+	config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
+	* config/i386/tm-symmetry.h:  Make comment inside #if 0 a real
+	comment.
+	* config/i386/tm-symmetry.h (STORE_STRUCT_RETURN):  Cast argument
+	to write_memory to avoid warnings from gcc.
+	* config/i386/xm-symmetry.h:  Add missing #endif.
+	* config/i386/nm-symmetry.h (NO_PTRACE_H):  Add for Dynix.
+	* config/i386/symmetry.mt (TDEPFILES):  Add i386-tdep.o.
+	* config/i386/symmetry.mh (NAT_FILE, NATDEPFILES):  Add.
+
+Mon Mar 21 11:50:28 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr.
+	(hppa_push_arguments): Likewise.
+
+Mon Mar 21 11:02:51 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* alpha-tdep.c:  Gobs of changes (many imported from mips-tdep) to
+	improve remote debugging efficiency.  Also fixed problems with
+	doing function calls for programs with no entry points.
+	* infcmd.c (run_stack_dummy):  Use CALL_DUMMY_ADDRESS instead of
+	entry_point_address.
+	* inferior.h (PC_IN_CALL_DUMMY):  ditto.
+	* mdebugread.c (parse_symbol, parse_procedure, parse_external,
+	parse_lines):  Pass section_offsets info to these routines so that
+	we can relocate symbol table entries upon readin.
+	* (psymtab_to_symtab_1):  Set symtab->primary to tell
+	objfile_relocate to do relocations for our symbols.
+	* (ecoff_relocate_efi):  New routine to relocate adr field of PDRs
+	(which hang off of the symbol table).
+	* Use prim_record_minimal_symbols_and_info instead of
+	prim_record_minimal_symbols to supply section info to make minimal
+	symbol relocations work.
+	* minsyms.c (prim_record_minimal_symbols_and_info):  If section is
+	-1, try to deduce it from ms_type.
+	* objfiles.c (objfile_relocate):  Use ALL_OBJFILE_SYMTABS where
+	appropriate.  Handle relocation of MIPS_EFI symbols special. Also,
+	add code to relocate objfile->sections data structure.
+	* remote.c (get_offsets):  Use new protocol message to acquire
+	section offsets from the target.
+	* (remote_wait):  Get rid of relocation stuff.  That's all handled
+	by objfile_relocate now.
+	* config/alpha/alpha-nw.mt (TM_FILE):  Use tm-alphanw.h.
+	* config/alpha/tm-alpha.h:  Define CALL_DUMMY_ADDRESS, and
+	VM_MIN_ADDRESS.
+	* config/alpha/tm-alphanw.h:  DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
+
+Mon Mar 21 10:09:06 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (_initialize_hpuxread): Don't call add_symtab_fns if
+	HPREAD is not defined.
+
+Sun Mar 20 15:21:57 1994  Doug Evans  (dje@cygnus.com)
+
+	* sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE
+	instead of 4.
+	* sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted,
+	can no longer set this at run time.
+	* config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now.
+	(TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
+	* config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
+	sparc-tdep.c compiles).
+	(TARGET_PTR_BIT): Must be a constant now, fix at 64.
+
+Sat Mar 19 08:51:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/{cisco.mt,tm-cisco.h}: New files.
+	* Makefile.in (ALLPARAM, ALLCONFIG): Add them.
+	* configure.in: Recognize m68*-cisco*-*.
+
+	* Makefile.in (TAGS): Use variables directly, rather than using
+	find, to locate TM_FILE, XM_FILE, and NAT_FILE.  This is faster
+	and means that these filenames no longer need be unique across all
+	the config/* directories.
+	* configure.in: Put the config/*/ into TM_FILE, etc.
+
+	* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
+	and trapv exceptions.
+
+	* target.h (struct section_table), objfiles.h (struct obj_section):
+	Change name of field sec_ptr to the_bfd_section.  More mnemonic
+	and avoids the (sort of, for the ptx compiler) name clash with
+	the name of the typedef.
+	* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
+	solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
+
+	* utils.c: Include readline.h.
+	* Makefile.in (utils.o): Add dependency.
+
+	* remote.c (getpkt): Add support for run-length encoding.
+
+Fri Mar 18 19:11:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* utils.c (prompt_for_continue): Call readline, not gdb_readline.
+
+Fri Mar 18 10:25:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dstread.c (record_minimal_symbol): New arg objfile.  Pass it to
+	prim_record_minimal_symbol.
+	Callers: Pass it.
+
+	* regex.c (EXTEND_BUFFER): Adjust pointers within buffer by
+	computing their offset from the start of the old buffer and adding
+	to the new buffer, rather than by assuming we can add the
+	difference between the old buffer and the new buffer (it might not
+	fit in an int).  Merge in cosmetic differences from emacs regex.c
+	version of this macro.
+
+Wed Mar 16 15:28:54 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* Makefile.in (install-only): Fix use of program_transform_name.
+
+Wed Mar 16 07:18:43 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c: Remove "set print fast-symbolic-addr off" command.
+	The bug which it worked around was fixed on 25 Feb 94 in coffread.c,
+	so I'm nuking the command.
+	* symtab.c (find_addr_symbol): Comment out, no longer used.
+
+	* main.c (main): Don't init_source_path for the -cd argument.  Now
+	that source_path doesn't contain the current_directory from when
+	GDB started up, init_source_path is no longer useful (and is
+	harmful because it clobbers a source_path set in $HOME/.gdbinit).
+
+	* TODO: Remove item about line numbers being off.  It is useless
+	and confusing without a reproducible test case (it mentions
+	proceed(), but I was able to step through proceed without trouble).
+
+Tue Mar 15 13:39:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	For Sunos 4.x targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run. Retrieve dynamic
+	symbols from stripped executables.
+	* symtab.h (minimal_symbol_type):  Add mst_solib_trampoline type.
+	* parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
+	symtab.c (list_symbols):  Handle mst_solib_trampoline.
+	* minsyms.c (lookup_minimal_symbol):  Handle mst_solib_trampoline
+	for all targets, remove IBM6000_TARGET dependencies.
+	* dbxread.c (read_dbx_dynamic_symtab):  New function.
+	* dbxread.c (dbx_symfile_read):  Use it.
+	* dbxread.c (SET_NAMESTRING):  Set namestring to
+	"<bad string table index>" instead of "foo" if the string index is
+	corrupt.
+	* xcoffread.c (read_xcoff_symtab):  Use mst_solib_trampoline instead
+	of mst_unknown.
+	* symtab.c (list_symbols):  Take from_tty as parameter and pass it
+	to break_command. Handle mst_file_* minimal symbol types.
+	* config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef.
+
+Tue Mar 15 11:40:43 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y(yylex): fix potential memory overflow.
+
+Tue Mar 15 10:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* environ.c (set_in_environ): Eliminate special handling of PATH and
+	GNUTARGET.
+	* putenv.c: Removed, conflicts with system declaration of
+	putenv on RS/6000 running AIX 3.2.5, and above change makes it
+	unnecessary. 
+	* Makefile.in: Change accordingly.
+	* procfs.c (procfs_create_inferior): Change comment accordingly.
+
+Tue Mar 15 10:05:27 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* rs6000-tdep.c: Change value to value_ptr.
+
+Sun Mar 13 17:19:03 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hpux_symtab: Correctly determine the namespace
+	and address class of SVAR, DVAR, TYPEDEF, TAGDEF, CONST, and
+	MEMENUM symbols.  Do not include function-scoped variables in
+	the partial symbol table.
+
+Sun Mar 13 09:45:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386m3-nat.c: Include floatformat.h.
+	(get_i387_state): Use memset not bzero.
+
+	* Version 4.12.3.
+
+	* Makefile.in: Enable commented out getopt_h, bfd_h, etc.  Change
+	ieee-float.h to floatformat.h.
+
+	* valprint.c (val_print_string): Ignore error if the error
+	happened after a terminating '\0'.
+
+	* c-valprint.c (c_val_print): Never add 1 to return value from
+	val_print_string; just return what it returns.
+
+	* target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for
+	looping through all of the enums.
+	* infrun.c (signals_info): Use it.
+
+Fri Mar 11 08:08:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (main): When printing warning about bad baud rate, don't
+	use warning(); it relies on current_target which isn't set up yet.
+
+	* breakpoint.c (_initialize_breakpoint): Update docstring for
+	tbreak to match what the code actually does.  Don't mention tbreak
+	in docstrings for "enable once" or "enable breakpoints once".
+
+Thu Mar 10 08:52:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after
+	while (0).  That defeats the whole purpose of using do . . . while (0).
+	* mdebugread.c (parse_partial_symbols): Don't use ?: expression as
+	list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
+	using a ?: expression as an lvalue is not portable.
+
+	* stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also
+	convert a LOC_ARG to a LOC_REF_ARG.  Update code which combines
+	'p' and 'r' symbol descriptors into a single symbol to look for a
+	LOC_REF_ARG.
+	* README, config/sparc/tm-sparc.h: Update comments.
+
+Wed Mar  9 21:43:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_type):  Do not complain for types with
+	an `indexNil' aux index, these are simply undefined types.
+	Remove indexNil check from caller of parse_type.
+	* mdebugread.c (parse_partial_symbols):  Do not enter
+	stGlobal, scCommon symbols into the minimal symbol table, their
+	value is the size of the common, not its address.
+	Handle scInit, scFini, scPData and scXData sections.
+	Use minimal symbol type mst_file_* for stLabel symbols, instead of
+	mst_*.
+	Enter stProc symbols into the global_psymbols list once, not into
+	the static_psymbols_list.
+	Get rid of dummy psymtab if it is empty, to allow proper detection
+	of stripped executables.
+	* mdebugread.c (cross_ref):  Allow cross references to Fortran
+	common blocks.
+
+Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (common_block_end, fix_common_block): Stash the
+	struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so
+	as to not assume that a pointer fits in an enum.
+
+Wed Mar  9 18:56:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c (fill_sym): check compiler verion number for pre-
+	UltraC compiler.
+	* os9kread.c (os9k_process_one_symbol): address of symbol is
+	relative to section not module.
+	* stabsread.c (define_symbol): add symbol type 's' as local
+	symbol for os9k.
+	* remote-os9k.c: add command 'set monitor_log' to turn on or off
+	monitor logging.
+	* remote-os9k.c: fix bug in delete breakpoint, single step trace.
+	* remote-os9k.c: fix bug in 'set remotebaud' function.
+	* remote-os9k.c (rombug_link): minimize checking so to improve
+	speed.
+	* symfile.c (symbol_file_command): check if failed to link, also make
+	the command be able to accept more than one filenames.
+	* target.c (target_link): check if failed to link with rombug.
+	* config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0.
+
+Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-es.c (es1800_child_ops): Don't declare it static.
+
+Tue Mar  8 11:42:39 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/i386/tm-i386v4.h: Give just macro name, not args, to #undef.
+
+Tue Mar  8 06:56:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c: New variable lowest_text_address.
+	(record_minimal_symbol, read_dbx_symtab): Set it.
+	(read_dbx_symtab): Use lowest_text_address + text_size instead of
+	end_of_text_address.
+	* config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT.
+
+	* dbxread.c (end_psymtab): Remove old and commented out
+	capping_global and capping_static.  Fix comments regarding
+	N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro.
+
+	* parser-defs.h: Add "extern" to start of variable declarations so
+	we don't end up with commons.
+	* parse.c: Define these variables.
+
+	* irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it
+	as one.
+
+Mon Mar  7 13:00:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* alpha-tdep.c: Change value to value_ptr.
+
+Sun Mar  6 17:36:53 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* solib.c (elf_locate_base):  New function to locate the address
+	of the dynamic linker's runtime structure in the dynamic info section.
+	* solib.c (locate_base):  Use it instead of iterating over the list
+	of mapped address segments.
+	* solib.c (look_for_base, bfd_lookup_symbol):  Removed, no longer
+	necessary.
+
+Fri Mar  4 09:50:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file.
+	(pc_in_interrupt_handler): New function.  Also add PARAM decl.
+	(find_proc_framesize): Deal with HPUX setting SAVE_SP bit for
+	signal trampoline and interrupt routines.
+	(frame_saved_pc): Handle signal trampolines and interrupt routines.
+	(frame_chain, frame_chain_valid): Likewise.
+	(hppa_frame_find_saved_regs): Likewise.  Also deal with special
+	saved regs convention for SP.
+	
+	* tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define.
+	(FRAME_BASE_BEFORE_SIGTRAMP): Define.
+	(FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define.
+
+	* tm-hppah.h (IN_SIGTRAMP): Define.
+
+Thu Mar  3 12:41:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* ch-exp.y (match_simple_name_string): Accept '_' as well as an
+	alphabetic character as the start of a name.
+
+	* sparclite/Makefile.in (all install): Build and install aload.
+
+	* configure.in: Accept i[34]86-*-*sysv32 because that is what
+	config.guess and config.sub produce.
+
+	* mips-tdep.c: Change value to value_ptr.
+
+Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
+	cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
+	objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
+	valarith.c, valops.c, valprint.c, value.h, values.c: Replace
+	value with value_ptr.  This is for the ptx compiler.
+	* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
+	"sec_ptr" typedef.
+	* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
+	#if 0 i386_float_info.
+	* symm-tdep.c (round): Remove.  Also remove sgttyb.
+	* symm-tdep.c: Remove lots of stuff which duplicates stuff from
+	i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
+	* i386-tdep.c (i386_frame_find_saved_regs): Put in
+	I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
+	someday.
+	* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
+	stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
+	symm-nat.c.  Define CHILD_WAIT and declare child_wait().
+	* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
+	tm-i386v.h is apparently OK.
+	* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
+	HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
+	USE_O_NOCTTY.
+
+Wed Mar  2 11:31:08 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* osfsolib.c (xfer_link_map_member): Update to use new
+	target_read_string interface.
+
+Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* infrun.c (wait_for_inferior): In checking
+	remove_breakpoints_on_following_step, check
+	through_sigtramp_breakpoint as well as step_resume_breakpoint.
+
+Tue Mar  1 16:22:56 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* os9kread.c (os9k_process_one_symbol): Rename
+	VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
+	* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
+	(CORE_ADDR)0, from target_link, since that is what it uses.
+	Process name at end, not during parsing (like we did before Kung's
+	change), so that -readnow and -mapped can appear anywhere.
+	Make text_relocation a local variable.
+	* config/i386/i386os9k.mt: Fix comment.
+	* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
+	* os9kread.c: Put "comments" after #endif inside /* */.
+	* stabsread.h: Add os9k_stabs variable.
+	* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
+	Set it.
+	* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
+	descriptor in global_symbols not local_symbols.
+	(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
+	descriptors.
+	(read_type): If os9k_stabs, accept function parameters after 'f'
+	type descriptor.
+	(read_array_type): If os9k_stabs, don't expect index type and
+	expect lower and upper to be separated by ',' not ';'.
+	(read_enum_type): If os9k_stabs, read a number before the first
+	enumeration constant.
+	(os9k_init_type_vector): New function.
+	(dbx_lookup_type): Call it when starting new type vector.
+	* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
+	* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
+	* os9kstab.c: Removed.
+	* Makefile.in: Update accordingly.
+	* objfiles.c (objfile_relocate_data): Removed.
+	* remote-os9k.c (rombug_wait): Call objfile_relocate
+	not objfile_relocate_data.
+	* objfiles.h, objfiles.c: Remove find_pc_objfile.
+	* remote-os9k.c (rombug_wait): Call find_pc_section not
+	find_pc_objfile.
+	* main.c (quit_command): Check inferior_pid; revert Kung change.
+	* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
+
+Tue Mar  1 14:56:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c: New file to read os9000 style symbo table.
+	* os9kstab.c: new file to read os9000 style stabs.
+	* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
+	* objfiles.c (find_pc_objfile): new function to search objfile
+	from pc.
+	* objfiles.c (objfile_relocate_data): new function to relocate
+	data symbols in symbol table.
+	* objfiles.h: Add two aux fields in struct objfile to handle
+	multiple symbol table files situation like in os9000.
+	* symfile.c: Change so 'symbol-file' command can handle multiple
+	files. Also call target_link() to get relocation infos.
+	* target.c (target_link): new function to get relocation info when
+	a symbol file is requested to load.
+	* main.c (quit_command): take out 'inferior_pid != 0' condition,
+	because in cross mode there's no inferior pid, bit they need to
+	be detached.
+	Makefile.in: add os9kread.c os9kstab.c and .o's.
+	configure.in: add i386os9k target.
+	config/i386/i386os9k.mt: new add.
+	config/i386/tm-i386os9k.h: new add.
+
+Tue Mar  1 13:16:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/sparc/tm-sun4sol2.h (IN_SIGTRAMP):  Handle ucbsigvechandler.
+	* sparc-tdep.c (sparc_frame_saved_pc):  Handle ucbsigvechandler.
+
+Tue Mar  1 11:54:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* target.c, target.h (target_read_string): Provide error detection to
+	caller.  Put string in malloc'd space, so caller need not impose
+	arbitrary limits.
+	* solib.c (find_solib): Update to use new interface.
+	* irix5-nat.c (find_solib): Read o_path from inferior
+	(clear_solib): Free storage for o_path.
+	* valprint.c (val_print_string): Add comments.
+
+Mon Feb 28 23:54:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (decode_line_1):  Handle the case when skip_quoted does not
+	advance `p'.
+
+Mon Feb 28 12:40:46 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* value.h (struct value): Add modifiable field.
+	* values.c (allocate_value, record_latest_value, value_copy): Set it.
+	(record_latest_value): Don't mess with VALUE_LVAL of value.
+	* valops.c (value_assign): Check it.  Reword existing error
+	message on not_lval.
+
+	* mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h
+	(STEP_SKIPS_DELAY): Added.
+	* infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in
+	the delay slot.
+
+	* valprint.c (val_print_string): If errcode is set, always print
+	an error, regardless of force_ellipsis.  In the non-EIO case,
+	just print the error message rather than calling error().  Don't
+	access *(bufptr-1) if bufptr points to the start of the buffer.
+	When looking for '\0', don't increment bufptr and addr if bufptr
+	started out already at limit.  If an error happens on fetching the
+	first character, don't print the string.
+
+Sun Feb 27 21:05:06 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
+	obsolete. 
+
+	* i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
+	i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
+	config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
+	m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
+	* sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
+	* findvar.c: Update comment regarding ieee-float.h.
+
+Sun Feb 27 21:39:48 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
+	FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
+	Define to make backtracing through the various sigtramp handlers
+	work.
+	* i386-tdep.c (i386v4_sigtramp_saved_pc):  New routine to fetch
+	the saved pc from ucontext on the stack for SVR4 signal handling.
+
+Fri Feb 25 09:41:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
+	target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
+	baud_rate is -1.  Remove sr_get_baud_rate and sr_set_baud_rate;
+	just use the global variable itself.  When printing baud rate,
+	don't print a baud rate if baud_rate is -1.
+
+	* coffread.c (read_coff_symtab): Pass mst_file_* to
+	record_minimal_symbol for C_STAT symbols.  Put C_EXT and C_STAT
+	symbols in the minimal symbols regardless of SDB_TYPE.
+
+Thu Feb 24 08:30:33 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* breakpoint.h (enum bptype): New type bp_through_sigtramp.
+	(bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
+	* breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
+	if we hit a bp_through_sigtramp breakpoint.  Remove kludge which
+	ignored bs->stop for a bp_step_resume breakpoint.
+	* infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
+	which performs one (the check_sigtramp2 one) of the functions
+	which had been handled by the step_resume_breakpoint.  For each
+	use of the step_resume_breakpoint, make it still use the
+	step_resume_breakpoint, use the through_sigtramp_breakpoint, or
+	operate on both.
+	Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
+	When setting the frame address of the step resume breakpoint, set
+	it to the address for frame *before* the call instruction is
+	executed, not after.
+
+	* mips-tdep.c (mips_print_register): Print integers using
+	print_scalar_formatted rather than duplicating all the
+	CC_HAS_LONG_LONG and so on.
+	(mips_push_dummy_frame): Use read_register_gen rather than using
+	read_register and then putting it back in target format with
+	store_unsigned_integer.  If registers are more than 4 bytes, give
+	an error rather than have some registers overwrite other
+	registers.
+	#if 0 unused include of opcode/mips.h.
+
+	* symfile.h: Don't declare arguments for coff_getfilename.
+
+	* defs.h: Revert Kung change regarding FORCE_LONG_LONG.
+
+Thu Feb 24 08:06:52 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* configure.in (hppa*-*-osf*): New configuration.
+	* config/pa/hppaosf.mt: New target makefile fragment.
+	* config/pa/tm-hppao.h: New target include file.
+
+Thu Feb 24 04:29:19 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* exec.c (print_section_info):  Print entry point for exec_bfd only.
+	* ser-unix.c (wait_for):  Fix typo in HAVE_TERMIO case.
+	* dwarfread.c:  Remove second inclusion of <sys/types.h>, which
+	causes problems if <sys/types.h> has no multiple inclusion protection.
+
+Wed Feb 23 16:28:55 1994  Jeffrey A. Law  (law@cygnus.com)
+
+	* tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
+	the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
+	(CALL_DUMMY_LENGTH): Changed accordingly.
+
+Wed Feb 23 16:21:25 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c (trap_low):  Make trap handler work for arbitrary
+	numbers of register windows.
+
+	* sparclite/hello.c:  Add factorial function for testing.
+	* salib.c:  Use macros instead of constants for I/O addresses to
+	make 931 support easier.
+	* sparclite.h:  Change constraint for LOC to "rJ" to force use of
+	register in sta/lda instructions.
+
+Wed Feb 23 10:39:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* dbxread.c (process_one_symbol): Set
+	block_address_function_relative for COFF like we do for ELF and SOM.
+
+Sat Feb 19 03:17:32 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (new_psymtab):  Pass in section_offsets and set
+	them in the pst.
+	* mdebugread.c (handle_psymbol_enumerators):  New function to enter
+	the enumerators of an ecoff enum into the partial symbol table.
+	* mdebugread.c (parse_partial_symbols):  Call it.
+	* symfile.c (reread_symbols):  Initialize objfile->*_psymbols.next.
+	* symmisc.c (dump_psymtab):  Fix typo, clean up output of section
+	offsets. Cast psymtab->read_symtab to PTR before passing it to
+	gdb_print_address.
+	* i386-tdep.c (i386_skip_prologue):  Skip over instructions that
+	set up the global offset table pointer in pic compiled code.
+	* config/mips/tm-mips.h (FIX_CALL_DUMMY):  For big endian targets,
+	error() on TYPE_CODE_FLT arguments whose size is greater than 8,
+	swap all other TYPE_CODE_FLT arguments as mips_push_arguments
+	ensures that floats are promoted to doubles before they are pushed
+	on the stack.
+
+Fri Feb 18 23:12:59 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
+	Fixup cache_on and flush_i_cache so that they work for both the
+	930 and 932 processors.  Rewrite most low level funcs (uart
+	access & cache stuff) to use new ASI access macros in sparclite.h.
+	Also make it easy to access second serial port.
+
+Fri Feb 18 22:17:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
+	<sys/stat.h>; not needed.
+
+Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stack.c (print_frame_info): In "pathological" case, don't
+	distrust the line number information.
+
+Fri Feb 18 16:51:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* mips-tdep.c (mips_print_register): handle 64 bits register.
+	* valprint.c (print_longest): fix a bug in printing 64 bits value.
+
+Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Version 4.12.2.
+
+	* Makefile.in (install): Do the sed for program_transform_name
+	ourselves instead of worrying about INSTALL_XFORM.  This enables
+	users to override INSTALL_PROGRAM in the standard way.
+
+	* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
+	depend on Makefile.in.
+
+	* defs.h, valprint.c: Make longest_to_int a function not a macro.
+	Only test against INT_MIN if a LONGEST is bigger than an int.
+
+	* README: Change GhostScript to Ghostscript.
+
+Fri Feb 18 07:30:55 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
+	Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
+	character file names.
+	* Makefile.in (ALLPARAM): Add these files.
+
+	* config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
+	character file names.
+	* Makefile.in: Add Kung's new mips64 files.
+
+Thu Feb 17 17:25:47 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
+	mips64el-*-ecoff and mips64-big-*.
+	* defs.h: get rid of FORCE_LONG_LONG.
+	* mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
+	parsing. Change register size to be MIPS_REGSIZE.
+
+Thu Feb 17 09:30:22 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
+
+	* corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, 
+	osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, 
+	xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
+
+Fri Feb 11 21:47:24 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)
+
+	* remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
+	(remove_commands, add_commands): Add/remove hms-drain when target
+	is connected.
+
+Fri Feb 11 16:11:38 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in:  Add Lynx/rs6000 support.
+	* lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
+	messages.  Add rs6000 support.  Don't try to modify unwritable
+	registers.
+	* rs6000-nat.c:  Move lots of native dependent stuff (like core
+	file support) from rs6000-tdep.c & xcoffexec.c to here.
+	* rs6000-tdep.c:  Move native dependent stuff to nat.c.
+	* xcoffexec.c:  Move native dependent stuff to nat.c.
+	* config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
+	from tm	file.
+	* config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
+	really native.
+	* config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
+	New files to support Lynx/rs6000.
+
+Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Remove note about gcc warnings on alpha, these should be
+	gone now.
+	* c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, 
+	m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
+	remote-utils.c, stabsread.c:  Include <string.h>.
+	* regex.c:  Include "defs.h", change re_comp argument to const char *.
+	* infptrace.c (fetch_register, store_inferior_registers):  Change
+	regaddr to type CORE_ADDR.
+	* config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
+	Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
+
+Mon Feb  7 09:21:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.h: Always define BYTE_BITFIELD to nothing.
+
+Mon Feb  7 08:44:17 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
+	* configure.in: Remove comment about m68k-em.mt.
+	* Makefile.in: Remove references.
+
+Mon Feb  7 08:22:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
+	BFD_HOST_64_TYPE.
+
+Sun Feb  6 15:56:09 1994  Jeff Law  (law@wild.cs.utah.edu)
+
+	* hpread.c (hpux_symfile_init): Use obj_som_* rather than obj_* to
+	access BFD private data.  Search for the "$TEXT$" space rather
+	than ".text".
+	(hppa_sym_fns): Add bfd target flavour to initializer.
+
+Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c (target_preopen): If target_kill doesn't remove the
+	target from the stack, use pop_target to do it.
+
+	* coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
+	of TYPE_CODE_PTR or TYPE_CODE_FUNC types.  This parallels similar
+	changes to stabsread.c from summer 1993.
+
+	* remote-udi.c (udi_files_info): If prog_name is NULL, just skip
+	printing the program, rather than passing NULL to printf.
+	(udi_detach): Set udi_session_id to -1 so that udi_close doesn't
+	try to call UDIDisconnect again.  Print better message.
+	(udi_kill): Just call UDIDisconnect ourselves, rather than doing
+	it via udi_close.
+	(udi_create_inferior): If udi_session_id is negative, open a new
+	TIP rather than giving an error.
+
+	* config/mips/mipsm3.mh, config/i386/i386m3.mh,
+	config/ns32k/ns32km3.mh: Define NAT_FILE.
+	* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
+	(it was inconsistent and namespace-wrong) to NM_M3_H.
+	* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
+	(m3_open): New function.
+	(m3_ops): Use it.
+	* TODO: Update Mach section.
+
+	* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
+
+Sun Feb  6 13:26:21 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* printcmd.c (printf_command):  Add missing single-letter
+	backslash-escape sequences, and improve error message.
+
+Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* corelow.c (solib_add_stub, core_open): Pass address of from_tty
+	rather than trying to shove an int into a pointer and back out
+	again.  This avoids compiler warnings.
+
+	* defs.h (alloca): Declare as void *, not char *, on hpux.
+	Don't prototype it, just declare the return type.
+
+Sun Feb  6 03:25:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-sun386.h, config/i386/tm-symmetry.h
+	(REGISTER_CONVERT_TO_RAW):  Add missing backslash.
+
+Sat Feb  5 08:03:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
+	ZERO_REGNUM, just read it as zero without talking to the board.
+
+	* config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
+	backslash.
+	* i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
+	to store_floating, not nonexistent variable len.
+
+	* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
+	New functions.
+	(mips_store_word): Change calling convention to return errors, and
+	to provide old contents if the caller wants it.
+	(mips_xfer_memory): Deal with errors from mips_store_word.
+	* config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
+	define now that remote-mips.c doesn't use BREAKPOINT.
+
+	* remote-mips.c (mips_create_inferior): Call warning if arguments
+	specified, and then execute "set args" command.  Call error, not
+	mips_error, if executable file not specified.
+
+	* remote-e7000.c: Replace "snoop" command (e7000_noecho) with
+	remote_debug.
+
+	* config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
+	to unsigned int.
+
+Sat Feb  5 05:27:05 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* value.h (print_longest):  Rename "value" to "val" in prototype
+	declaration because some compilers don't like arguments whose
+	names are the same as types.
+	* remote.c (remote_xfer_memory):  Cast "myaddr" to unsigned char *
+	before passing it to remote_*_bytes.
+
+Fri Feb  4 15:53:18 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* h8500-tdep.c (saved_pc_after_call): The size of the
+	pc is memory model dependent. (segmented_command,
+	unsegmented_command, _initialize_h8500_tdep): New commands to
+	change memory model.
+	* remote-e7000.c (_initialize_remote_e7000): Change name of snoop
+	command.
+	* remote-hms.c (hms_load): Remove breakpoints when loaded.
+	(hms_wait): Use new status structure
+	(hms_open): Push the target here. (hms_before_main_loop): Not
+	here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
+	with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
+	* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
+	all registers in a compact way.
+
+Fri Feb  4 07:41:13 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
+	as CORE_ADDR to match definition in rs6000-tdep.c.
+
+Fri Feb  4 01:14:20 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dwarfread.c (process_dies):  Skip nested TAG_compile_unit DIEs.
+	* dwarfread.c (add_partial_symbol):  Do not enter opaque aggregate
+	definitions into the psymtab.
+
+Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m68k-stub.c: Treat mc68332 like mc68020 most places.  Provide
+	a special exceptionSize for the 68332.
+
+	* remote-udi.c (udi_attach): If no arguments, print error.
+
+Thu Feb  3 17:34:05 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.12.1
+	* NEWS, README:  Update to match 4.12 release.
+
+Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* command.c (empty_sfunc): New function.
+	(add_set_cmd): Use it instead of not_just_help_class_command.
+	(not_just_help_class_command): Change calling convention back to
+	what it was before yesterday's change.
+
+	* stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
+	of the type if present.
+
+Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (decode_format): Don't blithely set the size for
+	an address to 'w'.  Make it 'g' or 'h', depending on TARGET_PTR_BIT.
+
+	* defs.h: Just typedef CORE_ADDR to bfd_vma.  Include bfd.h.
+	If BFD64, make a LONGEST a BFD_HOST_64_BIT.
+	* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
+	always just check against INT_MIN and INT_MAX (this also fixes things
+	if sizeof (long) > sizeof (int), e.g. Alpha).
+	* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
+	Don't define LONGEST or BUILTIN_TYPE_LONGEST.
+	* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
+	BUILTIN_TYPE_UNSIGNED_LONGEST.
+	* language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
+	longest_int and longest_unsigned_int.
+	* value.h (struct value): Just align to LONGEST, rather than worrying
+	about CC_HAS_LONG_LONG.
+	* valarith.c (value_binop): Figure out type ourself based on
+	sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST.  The
+	point is that we don't depend on CC_HAS_LONG_LONG anymore.
+	* valprint.c (val_print_type_code_int): Just call
+	extract_unsigned_integer directly, rather than going through
+	unpack_long.
+	* printcmd.c (decode_format): Remove code which would sometimes
+	change 'g' size to 'w' for integers.  print_scalar_formatted handles
+	printing huge integers well enough, thank you.
+
+	* command.c (add_set_cmd, not_just_help_class_command): Change
+	to make this the sfunc, not cfunc, since that is how we call it.
+	* command.h: Comment difference between sfunc and cfunc.
+	* demangle.c (set_demangling_command): Add third arg since that
+	is how it is called.
+	(_initialize_demangler): Use sfunc, not cfunc, for
+	set_demangling_command, since that is how it is called.
+	Remove show_demangling_command; it has no effect.
+
+	* command.c (shell_escape): Report errors correctly (with error
+	message from strerror).
+
+Wed Feb  2 14:35:41 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
+	x_scnlen.l rather than x_scnlen to match corresponding change in
+	coff/internal.h.
+
+Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h, ch-typeprint.c, ch-valprint.c:
+	Change comments regarding TYPE_CODE_BOOL.
+	* language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
+	regardless of the language.
+	(value_true): Just call value_logical_not regardless of language.
+	* coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
+	Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
+	* language.h: Improve comment for la_builtin_type_vector.
+	* m2-lang.c (_initialize_m2_language): Don't add any fields to
+	builtin_type_m2_bool.
+
+Tue Feb  1 17:13:32 1994  Kevin Buettner (kev@cujo.geg.mot.com)
+
+	* config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
+	Define IN_SIGTRAMP and backtrace correctly through signal handlers.
+
+Tue Feb  1 22:13:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* procfs.c (wait_fd):  Handle EINTR error return from PIOCWSTOP ioctl
+	by restarting the ioctl.
+
+Tue Feb  1 16:16:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.h (target_wait): Add comment about calling
+	return_to_top_level.
+
+Tue Feb  1 12:21:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
+	additional arguments.
+	* xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
+
+Mon Jan 31 16:10:41 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c:  Remove unnecessary #include of memory.h.
+
+Mon Jan 31 12:12:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mips-tdep.c: Remove code which sets saved_regs from
+	init_extra_frame_info and put it in new function mips_find_saved_regs.
+	(READ_FRAME_REG): Remove macro and replace uses with the expansion.
+	* mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
+	check if it is NULL and call mips_find_saved_regs if so.
+
+	* remote-mips.c: Use unfiltered, not filtered, output most places.
+
+	* blockframe.c (get_prev_frame_info): Detect and stop an infinite
+	backtrace.  Revise comments.
+
+Mon Jan 31 09:40:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_procedure):  Remove _sigtramp kludges for
+	alpha and irix. The _sigtramp case has to be handled properly
+	in the tdep files if we have no ecoff debugging info.
+	* alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
+	mips-tdep.c (mips_frame_saved_pc):  Handle signal handler frames
+	without PC_REGNUM kludge.
+	* mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
+	Clean up handling of mips sigtramp frames, improve comments.
+
+Sat Jan 29 23:25:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (read_unwind_info): Fix typo.
+
+	* paread.c (pa_symtab_read): Update the "check_strange_names"
+	filter to match GCC's current output.  Filter out section symbols
+	(which the HP linker sometimes puts in the wrong place).
+
+Sat Jan 29 07:44:59 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* serial.h (SERIAL_SET_TTY_STATE): Comment return value.
+
+	* Makefile.in (TAGS): Just echo one line, rather than the whole thing.
+
+	* Makefile.in: Remove all references to sparcly-nat.c.
+
+	* Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
+	remote-sim.h directly, rather than via $(remote_utils_h).  This avoids
+	duplicating serial.h and target.h.
+
+	* Makefile.in: Don't set M_INSTALL and M_UNINSTALL.  These variables
+	are not used anywhere (a 5 Oct 1993 change removed the uses).
+
+	* config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
+	* config/m68k/es1800.mt: Add comment.
+	* remote-es.c: Extensive changes to update to current conventions.
+
+	* ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
+	If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
+	to achieve the desired timeout.
+	* serial.h (serial_t): Add field timeout_remaining.
+
+Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* c-exp.y (yylex): Reenable nested type code.
+
+Fri Jan 28 15:40:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* a29k-tdep.c (examine_tag): Add comment regarding argcount.
+
+	* remote-mips.c (mips_ops): Fix docstring.
+
+	* remote-bug.c (bug_ops): Remove spurious newline from docstring.
+
+	* config/m68k/tm-monitor.h: Changes to bring this into accordance
+	with the old tm-m68k-em.h:
+	(GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
+	(HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
+	(REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
+	Add FIXME regarding GET_LONGJMP_TARGET.
+
+	* remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
+	* infptrace.c (kill_inferior): Add comments.
+	* main.c (quit_command): Call target_close after we kill or
+	detach.
+	* remote-udi.c (udi_close): Don't error() if QUITTING.
+
+Fri Jan 28 11:55:52 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* configure.in: Make m68k-coff and aout add monitor support in
+	addition to the standard serial support.
+
+Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
+	index indexNil.
+
+Fri Jan 28 10:40:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
+	* elfread.c (record_minimal_symbol_and_info),
+	dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
+
+Thu Jan 27 15:12:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386-stub.c: Add ".text" right before "mem_fault:".
+
+	* main.c (baud_rate): Add FIXME comment about printing -1 value.
+
+	* remote-utils.c (usage): Fix message to be accurate and conform
+	more closely to normal conventions.
+
+	* remote-utils.c (gr_files_info): Have the exec_bfd test control
+	whether to show information about exec_bfd, and not control whether
+	to show information about device and speed.
+
+	* remote-utils.c (gr_open): If sr_get_device returns NULL, give
+	usage message, don't dump core.
+
+	* remote-bug.c (bug_write_memory): Use alloca, not GCC extension
+	for variable size array.
+	(bug_fetch_register, bug_store_register): Rename "value" to
+	"fpreg_buf" because some compilers don't like variables whose
+	names are the same as types.
+	(bug_store_register): Use a cast when converting char * to
+	unsigned char *.
+
+	* symmisc.c (maintenance_print_symbols): Don't refer to the name
+	of the command in error message (the text was referring to the old
+	name of the command).
+
+	* symmisc.c (dump_symtab): Fix args to fprintf_filtered.
+
+	* c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
+	full details on structure elements without names.  This partially
+	reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
+	of those changes was accidental.
+
+	* stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
+	defined, make it an error to specify a single argument which is not
+	a frame number.
+
+	* Makefile.in (version.c), main.c (print_gdb_version): Use
+	host_alias and target_alias, not host_canonical and
+	target_canonical, to print configuration.
+
+Wed Jan 26 10:57:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
+	of builtin_type_long.  It is necessary to get a type which is
+	TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
+
+	Fix many sins which will come up in 32 bit x 64 bit GDB, and
+	various miscellaneous things discovered in the process:
+	* printcmd.c, defs.h (print_address_numeric): New function.
+	* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
+	breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
+	cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
+	printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
+	Use it.
+	* utils.c, defs.h (gdb_print_address): New function.
+	* expprint (dump_expression), gdbtypes.h: Use it.
+	* breakpoint.c (describe_other_breakpoints),
+	symmisc.c (dump_symtab, print_symbol):
+	Use filtered not unfiltered I/O.
+	(remove_breakpoints): Remove BREAKPOINT_DEBUG code.  Might as well
+	just run gdb under a debugger for this (and it had problems with
+	printing addresses, how to print b->shadow, etc.).
+	* buildsym.c (make_blockvector), core.c (memory_error),
+	exec.c (print_section_info), maint.c (print_section_table),
+	mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
+	symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+	Add comments saying code is broken.  Marked with "FIXME-32x64".
+	* dbxread.c (process_one_symbol), partial-stab.h (default),
+	remote-vx.c (vx_run_files_info):
+	Don't cast int being passed to local_hex_string.
+	* symmisc.c (print_symbol): Don't cast long being passed to %lx.
+	* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
+	only being a long.
+	* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
+	and LOC_LOCAL.
+	* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
+	* source.c: Include <sys/types.h> regardless of USG.
+
+Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valops.c (value_assign):  Set `type' after coercing toval.
+	* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
+	Use extract_unsigned_integer to get the address of a reference.
+
+Tue Jan 25 11:31:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
+	AIX can use ? instead of \ for continuation.  Deal with it.
+
+	* paread.c (read_unwind_info): Just assign to objfile->obj_private,
+	not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
+	the HP compiler in ANSI mode doesn't like.
+
+	* main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
+	based on USG, rather than defining HAVE_SIGSETMASK to an
+	expression containing defined.  Having a macro used in #if expand
+	to an expression containing "defined" is undefined according to
+	ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
+	it to.
+
+Mon Jan 24 20:51:29 1994  John Gilmore  (gnu@cygnus.com)
+
+	* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
+	Clean up the changes of 11 Jan, as recommended by Peter Schauer.
+
+Fri Jan 21 19:10:44 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y (match_string_literal):  Allow a zero-length string.
+	* ch-lang.c (chill_printstr):  Don't print zero-length string funny.
+
+Sat Jan 22 17:08:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386aix-nat.c (i386_float_info): Reverse order of registers before
+	passing them to print_387_status.
+	(print_387_status): Don't subtract top from 7 before using it.
+	* i387-tdep.c: Remove comment about AIX wanting "top" subtracted
+	from 7; the above explains it.
+
+Sat Jan 22 20:25:11 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (init_extra_frame_info):  Use frame relative stack
+	pointer value when fixing up the frame at the start of a function.
+
+Sat Jan 22 12:29:13 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c (fetch_core_registers):  Load the I & L regs for the
+	Sparc from the stack.
+
+Sat Jan 22 08:30:42 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote-mips.c (mips_initialize): Clear mips_initializing via
+	cleanup chain, not directly.
+
+	* ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
+	of -1 mean forever, like in the HAVE_SGTTY case.  Warn if we are
+	munging the timeout due to the limited range of c_cc[VTIME].
+
+	* fork-child.c, inferior.h (fork_inferior): New argument shell_file.
+	* procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
+	m3-nat.c (m3_create_inferior): Pass it.
+	* procfs.c: Remove ptrace function.  It was declared in a way which
+	conflicted with the prototype in unistd.h on Solaris.
+
+Sat Jan 22 01:37:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (frame_saved_pc):  Get the pc from the saved pc
+	in the sigcontext if it is a signal trampoline frame.
+	* config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
+	Define for Solaris2.
+
+Sat Jan 22 00:34:47 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
+	config/sparc/tm-sparclynx.h:  Move defs of FRAME_SAVED_I0/L0 to
+	tm-sparc.h so they can be overridden if necessary.
+
+Fri Jan 21 17:49:28 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c:  Add Sparc support.
+	* sparcly-nat.c:  Remove.  It's useless.
+	* config/sparc/nm-sparclynx.h:  Rewrite.
+	* config/sparc/sparclynx.mh (NATDEPFILES):  Replace sparcly-nat.o
+	with lynx-nat.o
+	* config/sparc/tm-sparclynx.h:  Rewrite.
+
+Fri Jan 21 19:08:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* rs6000-pinsn.c: Use the new disassembler in the opcodes
+	directory.  Old code was discarded, since the new opcode table has
+	a different format.
+
+Fri Jan 21 14:28:30 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (realclean):  Remove info files per make-stds.texi.
+
+Fri Jan 21 12:47:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
+	if N_SO_ADDRESS_MAYBE_MISSING is defined.
+	* config/sparc/tm-sun4sol2.h: Define it.
+
+Thu Jan 20 15:04:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* printcmd.c (print_address_symbolic):  Unconditionally use msymbol
+	if we did not find a symbol.
+
+Fri Jan 21 08:20:18 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
+	is not defined.
+
+	* hppab-nat.c (call_ptrace): Delete redundant function.
+	(kill_inferior, attach, detach, child_resume): Likewise.
+	(child_xfer_memory): Likewise.
+
+	* hppah-nat.c (call_ptrace): Delete redundant function.
+	(kill_inferior, attach, detach, child_resume): Likewise.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
+
+	* config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
+
+	* config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
+
+	* config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
+	(CHILD_XFER_MEMORY): Define.
+	(PT_*): Define so that generic infptrace.c code can be used.
+
+Fri Jan 21 09:23:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_symfile_read): Make second parameter a
+	struct section_offsets *, not a (nonexistent) struct section_offset *.
+
+	* xcoffread.c (read_xcoff_symtab): Make main_aux just a union
+	internal_xcoff_symtab, not an array of one of them.  Change lots of
+	"main_aux" to "&main_aux" and so on.
+
+	* coffread.c, xcoffread.c: Include <coff/internal.h>
+	before "symfile.h".
+
+Thu Jan 20 17:30:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (coff_getfilename): Make it not static.
+
+	* xcoffread.c (read_xcoff_symtab): complain() not abort().
+
+	* xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
+	a completely gratuitous difference between xcoffread.c and coffread.c).
+
+Wed Jan 19 15:09:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Don't set frame for
+	step_resume_breakpoint for IN_SIGTRAMP cases.
+
+	* infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
+	breakpoint.c (bpstat_what): Move step_resume from its own field of
+	the struct bpstat_what into the main_action.  Make it override
+	other breakpoints.  This is a conservative change in the sense
+	that before the step resume breakpoint was a breakpoint.c
+	breakpoint, hitting the step resume breakpoint overrode even
+	calling bpstat_stop_status.
+
+Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (normal_stop):  Set stop_pc after popping the dummy frame
+	in case execution was stopped in the called function.
+	* stack.c (print_frame_info, frame_info):  If backtracing through
+	a call dummy, handle the starting source line number on a line
+	boundary like backtracing through sigtramp.
+	* sparc-tdep.c (sparc_frame_find_saved_regs):  Get frame address
+	for call dummy frame right.  Remove old test for dummy frame,
+	it has been unused at least since gdb-3.5.
+	* sparc-tdep.c (sparc_push_dummy_frame):  Set return address register
+	of the dummy frame.
+
+Tue Jan 18 16:16:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c (signal_command): Accept 0 as legitimate signal number.
+
+Tue Jan 18 14:09:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (signals_info), target.c (target_signal_from_name):
+	Use ugly casts to avoid enumvar < enumvar or enumvar++.
+
+Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
+	* inflow.c (terminal_ours_1): When discussing how to deal with the
+	tty state, make note of query() as well as readline.
+
+	* infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
+	signals for which stop and print are cleared by default.
+
+Mon Jan 17 20:00:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (unwind_table_entry): Use one of the
+	reserved fields to hold a stub unwind entry type.  Fix typo.
+	(stub_unwind_entry): New structure for raw stub unwind entries.
+	(stub_unwind_types): The types of stubs we may encounter.
+	(UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
+	* hppa-tdep.c (rp_saved): Use additional information provided
+	by linker stub unwind descriptors.
+	(frameless_function_invocation): Likewise.
+	(frame_chain_valid): Likewise.
+	* paread.c (compare_unwind_entries): New function for sorting
+	unwind table entries.
+	(read_unwind_info): Rewrite to remove dependency on host endianness.
+	Read in data from the $UNWIND_END$ subspace which contains linker
+	stub unwind descriptors.  Merge that data into the basic unwind
+	table.
+
+	* hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
+
+Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
+	from either the symbol name or the auxent.
+	* coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
+	no longer static.
+
+Mon Jan 17 13:35:01 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (ALLPARAM):  Change irix5.h to nm-irix5.h.
+
+Mon Jan 17 12:35:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Update notes for alpha port.
+
+Mon Jan 17 11:15:57 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
+	for operation fault, constraint fault, and type fault.
+
+Sun Jan 16 12:46:01 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (init.c): Add comment explaining formatting conventions.
+
+	* c-exp.y (parse_number): Assign to temporary between the right
+	shifts, to work around a bug in the SCO compiler.
+
+	* Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
+	Add various files which were added to GDB recently.
+
+	* xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
+	within_function.
+
+	* Makefile.in: Add mostlyclean target.
+
+Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Version 4.11.4.
+
+Sat Jan 15 18:27:34 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* main.c (show_commands):  Make return type of extern
+	history_get be HIST_ENTRY, rather than struct _hist_entry.
+	(The latter loses with the upcoming merged readline.)
+
+Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
+	const char *, not char *.
+
+	* symtab.h (struct symbol): Make section short, not unsigned short.
+
+	* symtab.c (lookup_symbol): Add comment about QUIT here.
+
+	* utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
+
+	* c-exp.y (parse_number): Check for overflow regardless of range
+	checking.  Fix overflow check to use unsigned LONGEST, not
+	unsigned int.
+
+	* c-exp.y (parse_number): Make it so that integer constants are
+	builtin_type_long_long if builtin_type_long isn't big enough or if
+	an "LL" suffix is used.  Properly handle "UL" or "LU" suffixes.
+
+	* c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
+	Print our "()" first, then recurse for the target type.
+
+Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c (udi_create_inferior): Quote empty execfile argument.
+
+	* gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
+
+Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (request_quit): Re-establish signal handler regardless
+	of USG.
+
+	* config/mips/xm-irix4.h: Define HAVE_TERMIOS.
+
+Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i960-tdep.c: Include target.h.
+
+Fri Jan 14 17:12:28 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lynx-nat.c (sys/wait.h): Don't use absolute pathname.
+
+Fri Jan 14 11:06:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
+	changes (status -> ourstatus; declare status, etc.).
+	* config/nm-lynx.h: Fix child_wait prototype and include target.h.
+
+Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (ALLPARAM): Add config/nm-lynx.h.
+
+Fri Jan 14 11:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote-mips.c (mips_request, mips_wait): Correct prototypes.
+
+Fri Jan 14 11:37:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/xm-linux.h: Define HAVE_TERMIOS.
+
+Fri Jan 14 01:04:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/alpha/tm-alpha.h (CALL_DUMMY):  Improve comment.
+
+Thu Jan 13 10:32:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
+	is defined.  Otherwise just report TARGET_SIGNAL_UNKNOWN.
+
+	* mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
+	writing it.
+
+	Add search to target vector (#if 0'd until after 4.12):
+	* target.h (to_search, target_search): Add.
+	* gdbcore.h, core.c (generic_search): Add.
+	* remote.c (remote_search): Add.
+	* a29k-tdep.c (init_frame_info): Use target_search to find traceback
+	tag.
+
+	* printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
+	is on, call find_pc_function rather than relying just on the minimal
+	symbols (probably only matters for symbol readers which don't put
+	statics in the minimal symbols, but changing this strikes me as
+	not conservative enough).
+	Initialize name_location in all cases.
+	If no symbol and no msymbol, don't print anything symbolic.
+
+	* a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
+
+Wed Jan 12 20:53:16 1994  John Gilmore  (gnu@cygnus.com)
+
+	* printcmd.c (print_address_symbolic):  Make it search the
+	symtabs for variables as well as functions.  Add `set print
+	fast-symbolic-addr' and default it to fast (the old way).
+	Print line numbers for data items as well as functions.
+
+	* symtab.c (find_addr_symbol):  Return the symtab and the symbol
+	address, if a symbol is found (take two more args pointing to
+	where to store these results).
+
+	* symtab.h (find_addr_symbol):  Add prototype.
+
+Wed Jan 12 19:32:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* objfiles.h: Fix comments to reflect the fact that the phrase
+	"top of stack" always refers to where the pushing and popping takes
+	place, regardless of whether it is at the highest or lowest address.
+
+Wed Jan 12 13:23:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  Do not set TYPE_TAG_NAME for
+	compiler generated tag names.
+	* mdebugread.c (parse_type):  Handle cross references to qualified
+	aggregate types.
+	* valops.c (value_struct_elt):  Improve error message if the
+	address of a method is requested from an object instance.
+	* valops.c (search_struct_method):  Make name_matched non-static
+	to get it initialized correctly.
+	* config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER):  Define to
+	exclude segment register which are not writable on newer SCO versions.
+
+Wed Jan 12 14:44:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* go32-xdep.c: Remove unused function uerror.
+	(sigsetmask): Declare return type.  Declare argument (to match the
+	way it is called).  Explicitly return 0.
+
+Wed Jan 12 01:44:25 1994  John Gilmore  (gnu@cygnus.com)
+
+	* symtab.h (struct symbol, general_symbol_info, minimal_symbol,
+	partial_symbol):  Shrink the storage sizes of symbols, by making
+	enums into 1-byte bitfields when compiled __GNUC__, moving all the
+	enums and small ints to the end of each struct to improve
+	alignment, and switching the section number from int to unsigned
+	short.
+
+Wed Jan 12 00:16:26 1994  John Gilmore  (gnu@cygnus.com)
+
+	* symtab.c (find_addr_symbol):  New routine that will find the nearest
+	symbol associated with an address.  It does so by exhaustive
+	search of the symtabs, so it's slow but complete.
+
+Tue Jan 11 23:57:30 1994  John Gilmore  (gnu@cygnus.com)
+
+	* coffread.c (read_coff_symtab):  Set PC bounds of _globals_ symtab
+	to [0,0] rather than [0, end of first source file].  This avoids
+	problems with other parts of GDB looking for linetables in the
+	_globals_ symtab.  Eliminate variables num_object_files and
+	first_object_file_end.
+
+Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
+
+	* a29k-tdep.c (init_frame_info):  Cast null arg to examine_tag.
+	(pop_frame):  Restore PC2 and LR0 from dummy frames.
+	(push_dummy_frame):  Save PC2 and LR0 into dummy frames.
+	(setup_arbitrary_frame):  Handle 3 args and set up real frames.
+	* config/a29k/tm-a29k.h (FRAME_NUM_ARGS):  Update comments.
+	(DUMMY_FRAME_RSIZE):  Add 2 longwords for PC2 and LR0.
+	(SETUP_ARBITRARY_FRAME):  Define.
+
+Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
+
+Tue Jan 11 14:27:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote-udi.c (udi_resume): Correct prototype.
+
+Tue Jan 11 11:10:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+        * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
+	hppa_frame_find_saved_regs.
+	* hppa-tdep.c (dig_fp_from_stack): Delete function.
+	(prologue_inst_adjust_sp): New function.
+	(is_branch, inst_saves_gr, inst_saves_fr): New functions.
+	(skip_prologue): Completely rewrite to use unwind information.
+	(hppa_frame_find_saved_regs): Likewise.
+
+Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
+	to convert a signal number with appropriate bounds checking.
+
+	* remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
+
+Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
+
+	* stack.c (frame_info):  If FRAME_FIND_SAVED_REGS isn't defined,
+	print a newline to end the display anyway.
+
+	* sparc-tdep.c (sparc_pop_frame):  Pop the fsr and csr (float and
+	coprocessor status regs) when popping a frame.  This fixes 
+	float exceptions that occur after calling inferior functions.
+
+	* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
+	Read and write the fsr (float status register) to/from the child
+	process along with the float regs.  Remove Peter Schauer's change
+	of May 24 '93, which has higher overhead and doesn't solve the
+	real problem (which was that FSR wasn't being set).
+
+Mon Jan 10 23:16:42 1994  John Gilmore  (gnu@cygnus.com)
+
+	* a29k-tdep.c (examine_prologue):  Don't worry if the ASGEQ
+	stack overflow check isn't right after the register stack
+	adjustment instruction.  Metaware R2.3u compiler moves other
+	things in front of it.  This fix isn't perfect but is what's
+	running.
+
+Mon Jan 10 20:08:23 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
+
+	* config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
+	character filenames.
+	* configure.in: Change accordingly.
+
+Mon Jan 10 15:48:36 1994  Tom Lord  (lord@rtl.cygnus.com)
+
+	* m68k-stub.c, sparc-stub.c: removed spurious introduction of 
+	_filtered io routines from these two files.
+
+Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
+	config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
+	* mdebugread.c (parse_symbol):  Handle enum sh.type produced by
+	DEC c89. 
+	* mdebugread.c (add_line):  Handle zero linenos produced by DEC c89.
+
+Fri Jan  7 12:55:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
+	printing to gdb_stderr.
+
+	* remote-udi.c (udi_kill): Don't close the connection, just set
+	inferior_pid to zero.
+	(udi_mourn): Call remove_breakpoints.
+
+	* remote-udi.c: Remove obsolete need_artificial_traps comment.
+
+	* i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
+
+Thu Jan  6 07:17:53 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* symtab.c (lookup_symbol): Don't try adding .c to the name.
+
+	* remote-bug.c: At the start of each section, reset srec_frame
+	back to 160.
+
+	* target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
+	* target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
+	* infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
+	code which looks for those two waitkinds.  Use switch statement.
+	* config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
+	CHILD_SPECIAL_WAITSTATUS.
+
+	* procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
+	* Move target_signal_from_host, target_signal_to_host, and
+	store_waitstatus from inftarg.c to target.c.  procfs needs them.
+	* target.c: Include "wait.h" and <signal.h>.
+	* target.h, infrun.c (proceed), proceed callers: Pass new code
+	TARGET_SIGNAL_DEFAULT instead of -1.  This avoids problems with
+	enums being treated as unsigned and is cleaner.
+	* infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
+	TARGET_SIGNAL_0.
+	* infcmd.c (signal_command), infrun.c (signals_info):
+	Don't allow user to specify numeric equivalent of
+	TARGET_SIGNAL_DEFAULT.
+
+Tue Jan  4 15:34:36 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* config/alpha/alpha-netware.mt:  New target support for Alpha
+	running Netware.
+	* configure.in:  Add alpha-*-netware* target.
+
+Tue Jan  4 14:51:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
+
+Tue Jan  4 09:47:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.h: Add enum target_waitkind, enum target_signal, and
+	struct target_waitstatus.  Change status argument to target_wait to
+	be struct target_waitstatus * instead of int *.
+	* target.h, infrun.c, all targets: Change type of signal arguments
+	to resume(), proceed(), and target_resume() from int to enum
+	target_signal.
+	* All targets (*_wait, *_resume): Change accordingly.
+	* infcmd.c (program_info, signal_command), throughout infrun.c, 
+	* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
+	* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
+	signal code stuff right with the new signals would be non-trivial).
+	* inferior.h (stop_signal): Make it enum target_signal not int.
+	* target.c, target.h (target_signal_to_string, target_signal_to_name,
+	target_signal_from_name): New functions.
+	* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
+	store_waitstatus): New functions.
+	* procfs.c (procfs_notice_signals): Use them.
+	* i960-tdep.c (i960_fault_to_signal): New function, to replace
+	print_fault.
+	* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
+
+	* objfiles.c (build_objfile_section_table): Don't abort() if
+	objfile->sections is already set.
+
+	* objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
+	to match recent change to exec.c.
+
+	* Version 4.11.3.
+
+	* main.c (print_gdb_version): Change year to 1994.
+
+	* ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
+	* Makefile.in (NONSRC): Add ChangeLog-93.
+
+Mon Jan  3 11:57:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (read_type): Allow defining several type numbers
+	at once (e.g. "(1,2)=(3,4)="...).
+
+	* stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
+
+	* breakpoint.c (frame_in_dummy): Check PC as well as frame.
+
+Mon Jan  3 02:47:03 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (psymtab_to_symtab_1):  Only pass N_STAB symbols
+	to process_one_symbol.
+	* symtab.c (find_pc_psymbol):  Search global_psymbols as well to
+	avoid caching a bad endaddr in find_pc_partial_function.
+
+Sun Jan  2 21:41:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
+
+Sat Jan  1 04:35:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Do not step or step resume past
+	the end of a one-line function we just stepped into.
+
+For older changes see ChangeLog-93
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-95 b/gdb/ChangeLog-95
new file mode 100644
index 0000000..2265be8
--- /dev/null
+++ b/gdb/ChangeLog-95
@@ -0,0 +1,4915 @@
+Fri Dec 29 16:30:58 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* symfile.c (find_sym_fns): Add PowerMac to xcoff file recognition
+	kludge.
+
+Fri Dec 22 11:05:59 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure.in (gdb_host): Add support for DG/UX running on x86 as
+	a host.
+  	(all x86 targets and hosts): Add support for pentium-pro machines.
+
+	* configure: Rebuild.
+
+	* config/i386/i386dgux.mh: New file for DG/UX running on x86 host.
+
+Thu Dec 21 19:09:20 1995  Rob Savoye  <rob@chinadoll.cygnus.com>
+
+	* remote-array.c (array_wait): Poll the keyboard along with the
+	serial port so users can tpye at the target while their
+	application is running.
+
+Thu Dec 21 11:58:52 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* Makefile.in (ppcbug-rom.o, srec.o): Add dependencies.
+
+	* monitor.c (monitor_debug): Take prefix, and suffix arguments.
+	Print trailing newline after the suffix.
+	(monitor_printf{,_noecho}): Change monitor_debug calls.
+	(monitor_printf): Call monitor_expect instead of trying to do the
+	expect processing locally so that if there is extra junk, it
+	doesn't hang things up.
+	(readchar): If MO_HANDLE_NL is set, handle \r\n pairs and convert
+	them to a single \r.  Use monitor_debug to print out byte read.
+
+	* monitor.h (MO_HANDLE_NL): Add new flag.
+
+	* ppcbug-rom.c (ppcbug_ops{1,2}): Split into two ops, one that
+	uses lo 0 to load, and the other that uses lo 1.  Set flag
+	MO_HANDLE_NL.
+	(ppcbug_open{0,1}): Clone and split to handle ppcbug_ops{1,2}.
+	(_initialize_ppcbug_rom): Set up both ppcbug_open{0,1}.
+
+Wed Dec 20 10:54:41 1995  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h: Delete extraneous whitespace at end of file.
+	* symfile.h: Move #include of demangle.h outside conditional.
+	* objfiles.h (struct objstats, OBJSTAT, OBJSTATS): New struct and
+ 	macros to hold per-objfile statistics for internal
+ 	instrumentation.
+	(struct objfile): Add OBJSTATS member, which is optional.
+	* buildsym.h (next_symbol_text_func): Now takes objfile argument.
+	Also update copyright to 1995.
+	* dbxread.c (dbx_next_symbol_text): Now takes objfile argument.
+	(dbx_symfile_init, coffstab_build_psymtabs, elfstab_build_psymtabs,
+	stabsect_build_psymtabs): Accumulate string table size.
+	(dbx_next_symbol_text, read_dbx_symtab, read_ofile_symtab):
+	Accumulate number of stabs symbols read. 	
+	* dwarfread.c (new_symbol, symthesize_typedef):
+	Accumulate number of full symbols created.
+	* gdbtypes.c (alloc_type): Accumulate number of types.
+	* maint.c (maintenance_print_statistics): New function.
+	* mdebugread.c (mdebug_next_symbol_text): Now takes objfile
+ 	argument.
+	* minsyms.c (prim_record_minimal_symbol_and_info): Accumulate
+	number of minimal symbols read.
+	* os9kread.c (read_os9k_psymtab): next_symbol_text takes objfile
+ 	arg.
+	* partial-stab.h: next_symbol_text takes objfile arg.
+	* stabsread.c (error_type, STABS_CONTINUE): Now takes objfile arg
+	and uses it to call next_symbol_text.
+	* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+	Accumulate number of partial symbols created.
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Accumulate number of partial
+	symbols created.
+	* symmisc.c (print_objfile_statistics): Print the per-objfile
+	internal instrumentation statistics gathered.
+	* xcoffread.c (xcoff_next_symbol_text): Now takes objfile argument.
+
+Fri Dec 15 16:15:55 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* top.c (set_endian_from_file): Use new bfd_big_endian macro.
+
+Fri Dec 15 12:21:10 1995  Raymond Jou  <rjou@mexican.cygnus.com>
+
+	* mpw-make.sed: Add quotes to RIncludes reference. 
+
+Fri Dec 15 13:18:55 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* remote-array.c: Remove bogus setting of baudrate to 4800. Their
+	hardware has real UARTS now.
+
+Mon Dec 11 18:19:16 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.in (powerpc-*-macos*): New target configuration.
+	* configure: Update.
+	* config/powerpc/macos.mh, config/powerpc/macos.mt,
+ 	config/powerpc/nm-macos.h, config/powerpc/tm-macos.h, mac-nat.c:
+ 	New files, native PowerMac debugging support.
+	* Makefile.in (mac-nat.o): Add build rule.
+	* mpw-config.in (enable_cflags): Add support.
+	(m68k-apple-macos, powerpc-apple-macos): Fix natdepfiles to
+	list object file instead of source file.
+	* mpw-make.sed (@ENABLE_CFLAGS@): Don't edit out, replace with
+	value of variable.
+	(install, install-only): Edit MPW-specific installation into
+	place of Unix shell code.
+	* mac-gdb.r: Fix version resources to use symbolic version strings.
+	(cfrg): New resource, code fragment for PowerMac.
+
+Mon Dec 11 14:13:03 1995  Fred Fish  <fnf@amigalib.com>
+
+	* dbxread.c (process_one_symbol): When looking at the next
+	minimal symbol, check for end of the minimal symbol array
+ 	(symbol with NULL pointer for name) before dereferencing it.
+
+Mon Dec 11 15:56:55 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* eval.c (evaluate_struct_tuple):  Fix thinko.
+
+Mon Dec 11 06:52:02 1995  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-typeprint.c (chill_type_print_base): Slightly change of printing
+	of variant structures.
+
+Mon Dec 11 00:36:01 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (value_cast):  Handle casts to and from TYPE_CODE_CHAR.
+	* ch-exp.c (match_integer_literal):  Fix long long support.
+	* gdbtypes.c (get_discrete_bounds):  Make TYPE_LENGTH (type) ==
+	sizeof (LONGEST) case work OK.
+
+Fri Dec  8 21:02:24 1995  Fred Fish  <fnf@cygnus.com>
+
+	* coffread.c, dbxread.c, dstread.c, objfiles.c, os9kread.c,
+	symfile.c, symtab.c:  Use "obstack.h" rather than <obstack.h>.
+
+Wed Dec  6 16:16:18 1995  Stu Grossman  (grossman@cirdan.cygnus.com)
+
+	* remote-mips.c (mips_receive_header):  Allow mips_syn_garbage to be
+	user-settable (via set syn-garbage-limit).  Setting it to -1 makes
+	it unlimited.
+
+Tue Dec  5 18:33:43 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* gdbtypes.c (check_stub_method): Make sure we get back a function
+	string in the demangled name before we try to use it.
+
+Tue Dec  5 18:08:29 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c (monitor_expect_regexp):  Make static, add prototype.
+	* (monitor_read_memory_single):  Call monitor_expect_regexp with
+	pointer to getmem_resp_delim_pattern, not entire struct.
+
+Tue Dec  5 15:51:25 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* c-lang.h (c_op_print_tab): Don't declare, some compilers
+	consider illegal if structure not defined, and only used
+	in c-lang.c anyway.
+
+Sun Dec  3 12:31:03 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* eval.c (evaluate_subexp_standard case):  Fix typo.
+
+Sun Dec  3 11:59:21 1995  Jeffrey A. Law  <law@cygnus.com>
+
+	* ch-exp.c (parse_named_record_element): Avoid aggregrate
+	initializations for automatic variables.
+
+	* hppa-tdep.c (hppa_alignof): Fix typo in last change.
+
+Sat Dec  2 19:32:57 1995  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.c (global_psymbols, static_psymbols):  Remove, unused.
+
+Sat Dec  2 03:02:21 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* alpha-tdep.c (heuristic_proc_desc):  Add heuristic to
+	determine the return address register, needed for OSF/1-3.2C.
+	* config/alpha/tm-alpha.h (T7_REGNUM, T9_REGNUM):  Define.
+
+Fri Dec  1 07:23:57 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* ppcbug-rom.c (ppcbug_cmds): Turn on MO_GETMEM_READ_SINGLE
+	because PPCbug displays the memory as characters as well as hex.
+	Fix getmem/setmem commands.
+
+	* srec.c (load_srec): Fix off by one typo in last submission.
+
+	* rs6000-tdep.c (push_arguments): Fix typo.
+
+Thu Nov 30 23:54:17 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* language.c (lang_bool_type), language.h:  New function.
+	* language.h (LA_BOOL_TYPE):  New macro.
+	* eval.c (evaluate_subexp_standard)  Use LA_BOOL_TYPE instead
+	of builtin_type_int where appropriate,
+	* valarith.c (value_subscript):  Likewise.
+
+	* valops.c (value_slice):  Implement (value) bitstring slices.
+	* valprint.c (val_print):  If TYPE_LENGTH is zero, don't automatically
+	print "<incomplete type>" - Chill has zero-length (string) types.
+
+	* gdbtypes.c (check_stub_type):  Removed;  no longes needed.
+	* ch-exp.c (expect, parse_call):  Tweak error messages.
+
+Wed Nov 29 13:35:18 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* scm-valprint.c (scm_isymnames):  Remove "#@" prefix.
+	(scm_scmval_print):  Do not print "#@" prefix.
+
+	* gdbtypes.h (enum type_code):  Added TYPE_CODE_TYPEDEF.
+	(check_typedef):  New prototype.
+	(CHECK_TYPEDEF):  New macro.
+	(TYPE_DUMMY_RANGE):  Removed.
+	* gdbtypes.c (get_discrete_bounds):  Fix paren error; make more robust.
+	(create_array_type):  Don't force_to_range_type;  users of the
+	array are responsible for handling non-range index types.
+	(create_set_type):  Likewise.
+	(force_to_range_type):  Removed.
+	(check_typedef):  New function handles stub types and typedefs.
+	(check_stub_type):  Just call check_typedef. (To be removed.)
+	(recursive_dump_type):  Handle TYPE_CODE_TYPEDEF.
+	* ch-lang.c (type_lower_upper):  Use get_discrete_bounds.
+	(evaluate_subexp_chill):  Handle string repetition.
+	Re-arrange to handle EVAL_AVOID_SIDE_EFFECTS better.
+	* ch-typeprint.c (chill_type_print_base):  Handle TYPE_CODE_TYPEDEF.
+	Pass show=0 in recursive calls various places.
+	(case TYPE_CODE_ARRAY):  Don't require index type to have
+	TYPE_CODE_RANGE.
+	(case TYPE_CODE_RANGE):  Don't need to support TYPE_DUMMY_RANGE.
+	* gdbtypes.c, ch-lang.c, ch-typeprint.c (numerous places):
+	Add check_typedef/CHECK_TYPEDEF as needed.
+
+	* ch-exp.y:  Replaced by ...
+	* ch-exp.c:  New file.  Use recursive-descent.
+	Recognize labelled array tuples and powerset ranges.
+	* Makefile.in:  Update for no longer using yacc for ch-exp.
+
+	* c-lang.c:  Make various functions non-static.
+	* c-lang.h:  Add bunches of prototypes.
+	* cp-valprint.c (cp_print_value_fields):  Also take address.
+	(cp_print_value):  Likewise.  Use baselcass_offset.
+	* stabsread.c (current_symbol):  New static variable.
+	(type_synonym_name):  Remove.
+	(read_type):  If copying, make copy be a TYPE_CODE_TYPEDEF.
+	(read_array_type):  Don't need to handle undefined element type here.
+	(cleanup_undefined_types):  Ditto.
+	(read_range_type):  Look for Chill ranges.
+	* valops.c (value_assign):  Fix case lval_internalvar - don't try
+	to assign into old value (which might be too small!).
+	(value_coerce_array):  No longer need special VALUE_REPEATED handling.
+	(value_arg_coerce):  Cleaner array->pointer decay mechanism.
+	(search_struct_field):  Use baseclass_offset rather than
+	baseclass_addr.
+	(value_slice):  Use get_discrete_bounds.
+	* value.h (COERCE_VARYING_ARRAY):  Take type argumnt as well.
+	* values.c (baseclass_offset):  Change parameter interface.
+	(baseclass_addr):  Removed.
+	* c-typeprint.c, c-valprint.c, ch-valprint.c, values.c, valops.c:
+	Add check_typedef/CHECK_TYPEDEF as needed.
+
+	* alpha-tdep.c, c-exp.y, h8500-tdep.c, f-exp.y, f-valprint.c,
+	findvar.c, hppa-tdep.c, infcmd.c, language.c, printcmd.c,
+ 	rs6000-tdep.c, symmisc.c, symtab.c, mdebugread.c:
+	Add check_typedef/CHECK_TYPEDEF as needed.
+
+	* f-typeprint.c, valarith.c, valprint.c, typeprint.c, eval.c:
+	Add check_typedef/CHECK_TYPEDEF as needed.
+	* f-typeprint.c:  Various cleaning up.
+	* valarith.c (value_subscript):  Also subscript bitstrings (for Chill).
+	* typeprint.c (print_type_scalar):  Also support TYPE_CODE_RANGE.
+	* eval.c (evaluate_subexp_standard case OP_ARRAY):  Implement
+	support for labelled array tuples and ranges in powerset tuples.
+	(init_array_element):  New function.
+	
+	* top.c (command_line_input):  Only strip out an initial #-comment.
+	Looking for internal comments is language-specific (breaks Scheme).
+	
+	* expression.h (enum exp_opcode):  Add BINOP_RANGE.
+	* expprint.c (dump_expression):  Support BINOP_RANGE.
+	* eval.c (evaluate_subexp_standard):  Handle BINOP_RANGE (as error).
+	(case MULTI_SUBSCRIPT):  Fix broken f77 value->int ad hoc conversion.
+	* ch-lang.c (chill_op_print_tab):  Support BINOP_RANGE.
+	(evaluate_subexp_chill):  Error on BINOP_COMMA.
+
+	* Makefile.in:  Clean up so doc stuff stays in doc sub-dir.
+
+Wed Nov 29 16:39:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* monitor.c (monitor_debug): New function to print monitor debug
+	output in printable fashion.
+	(monitor_printf{,_noecho}): Call monitor_debug instead of
+	fputs_unfiltered.
+
+	* srec.c (load_srec): When printing srec debug information, do not
+	print the carriage return directly, instead print \\r followed by
+	a newline.
+
+Tue Nov 28 15:25:28 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* Makefile.in (target_subdir): Define.
+	(CC_FOR_TARGET, CXX_FOR_TARGET): Use it to find target libraries.
+	* configure.in (X_CFLAGS): Fix typo.
+	(target_subdir): Set to "${target_alias}/" if cross.
+	* configure: Regenerated.
+
+	* dbxread.c (dbx_symfile_read): Set block_address_function_relative
+	for `pe' format files.
+
+Tue Nov 28 11:17:47 1995  Fred Fish  <fnf@cygnus.com>
+
+	* magic.h:  Renamed to gmagic.h to avoid <magic.h> conflict.
+	* magic.c:  Renamed to gmagic.c in sympathy.
+	* eval.c, gmagic.c, config/tm-magic.h:
+ 	Include "gmagic.h" rather than "magic.h".
+
+Sat Nov 25 02:56:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (handle_psymbol_enumerators, parse_symbol):
+	Recognize enums from alpha cc -migrate.
+	(upgrade_type):  Pass correct fd to parse_symbol when parsing
+	the index type of an array.
+	(parse_procedure, parse_lines, psymtab_to_symtab_1):  Handle
+	unsorted procedure descriptors from Irix 5.x and Alpha OSF/1-3.x
+	shared libraries. Use CORE_ADDR instead of `unsigned long' in
+	procedure descriptor address computations.
+
+	* symtab.c (decode_line_1):  Prevent accidental strchr match
+	of a null character with the terminating null character of
+	gdb_completer_quote_characters.
+	(cplusplus_hint):  Make sure that only a single quote is printed
+	in the hint message.
+
+Fri Nov 24 16:17:01 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* top.c (recurse_read_control_structure): Don't make cleanups
+	here.  Callers handle that correctly.
+
+Tue Nov 21 15:16:34 1995  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* config/m68k/xm-hp300hpux.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
+	Also force HAVE_MMAP to be defined since autoconf is currently broken
+	for detecting a working mmap under hpux.
+	* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS): Tweak MMAP_BASE_ADDRESS
+	to a better value suggested by Jeffrey A Law (law@cygnus.com).
+
+Tue Nov 21 08:48:58 1995  Fred Fish  <fnf@cygnus.com>
+
+	* config/pa/xm-hppah.h: Define MMAP_BASE_ADDRESS and MMAP_INCREMENT.
+	Also force HAVE_MMAP to be defined since autoconf is currently broken
+	for detecting a working mmap under hpux.
+	* objfiles.c (map_to_address): Have gdb print a warning when it
+	is compiled with HAVE_MMAP but without both MMAP_BASE_ADDRESS and
+ 	MMAP_INCREMENT defined (thus making it appear mmap doesn't work).
+
+Mon Nov 20 14:13:53 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Add support for dynamic function
+	trampolines.  These are pieces of code between the caller and the
+	callee that figure out the address of the callee's code at run
+	time.  Upon entry, we can't figure out the callee's address, so we
+	set a breakpoint within the trampoline where the address will be
+	known, and continue the target.  Once we hit the breakpoint, we
+	break at the callee's address and proceed as usual.
+
+Mon Nov 20 11:12:34 1995  Fred Fish  <fnf@cygnus.com>
+
+	* objfiles.c (allocate_objfile): Change warning message about mapped
+	symbol tables so that it is obvious that they are not supported on
+	this particular machine rather than implying they are not supported
+	at all in this version of gdb.
+
+Sun Nov 19 05:20:53 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* irix5-nat.c, osfsolib.c (solib_address):  Return the name of the
+	containing solib.
+	* stack.c (print_frame_info):  Use minimal symbol only if
+	fi->pc is in a known section.
+
+Sat Nov 18 11:19:35 1995  Roland McGrath  <roland@churchy.gnu.ai.mit.edu>
+
+	* solib.c (solib_address): Return the name of the containing solib.
+	* solib.h (PC_SOLIB): New macro; define using solib_address.
+	* stack.c (print_frame_info) [PC_SOLIB]: If no function name, try
+	PC_SOLIB on the PC value.
+
+Sat Nov 18 04:09:31 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* annotate.c (annotate_source, annotate_frame_begin):  Issue
+	`0x' prefix for the pc value, to remain consistent with previous
+	GDB versions.
+
+	* blockframe.c (find_pc_partial_function), config/pa/tm-hppa.h:
+	Remove Sun shared library transfer hack and
+	INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK, it is obsoleted by the
+	mst_solib_trampoline minimal symbols.
+
+	* blockframe.c (inside_main_func):  Check main_func_*pc against
+	INVALID_ENTRY_*PC, not zero.
+	* symfile.c (init_entry_point_info):  Initialize ei.*pc with
+	INVALID_ENTRY_*PC.
+	* mipsread.c (mipscoff_symfile_read):  If the entry_file bounds
+	are still unknown after processing the partial symbols, then try
+	to set them from the minimal symbols.
+
+	* infcmd.c (registers_info):  Error out if selected_frame is NULL.
+	* stack.c (return_command):  Select new current frame silently if
+	not interactive.
+
+	* mipsread.c (read_alphacoff_dynamic_symtab):  Ignore additional
+	DT_MIPS_LOCAL_GOTNO and DT_MIPS_GOTSYM entries.
+
+	* irix5-nat.c (solib_create_inferior_hook):  Call solib_add only
+	if auto_solib_add_at_startup is nonzero.
+	(_initialize_solib):  Add "set auto-solib-add" command.
+	* osfsolib.c (solib_create_inferior_hook):  Call solib_add only
+	if auto_solib_add_at_startup is nonzero.
+	(_initialize_solib):  Add "set auto-solib-add" command.
+
+Wed Nov 15 17:12:04 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* utils.c: Don't include sys/ioctl.h etc if MPW is host.
+
+Tue Nov 14 17:16:46 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* config/arm/tm-arm.h (ADDITIONAL_REGISTER_NAMES): Fix r5.
+	(FRAME_SAVED_PC): Minor clean up.
+
+Tue Nov 14 14:51:05 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c (monitor_load_srec monitor_make_srec):  Move all
+	S-record download code into srec.c.
+	* srec.c srec.h:  New files.  Contain S-record loading routines
+	formerly in monitor.c.
+	* serial.c serial.h:  New routine just like fprintf, but uses
+	serial_t instead of FILE *.
+	* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
+	Don't add four to saved pc (makes things match manual).  Also, fix
+	bug where we didn't get pc from stack frame correctly.
+	* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL):  Don't add four to
+	saved pc.  Real hardware does this for you.
+	* sh3-rom.c (sh3_load):  New routine.  Sets up for download then
+	calls generic S-record loader.
+	* config/h8300/h8300.mt, config/h8500/h8500.mt,
+	config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
+	Add srec.o to TDEPFILES.
+
+Tue Nov 14 15:57:36 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* ppcbug-rom.c: New file to support the Motorola PPCBUG monitor
+	for PowerPC's.
+
+	* config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Include
+	ppcbug-rom.o, monitor.o, and srec.o
+
+	* config/i386/linux.mt (XDEPFILES): Include ser-tcp.o.
+
+Mon Nov 13 13:12:46 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* partial-stab.h: Remove GDB_TARGET_IS_HPPA kludge.
+
+Fri Nov 10 13:08:54 1995  Jeff Law  (law@kahlua.cs.utah.edu)
+
+	* terminal.h (HAVE_SGTTY): Fix typo.
+
+Thu Nov  9 17:34:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure.in (gdb_target): Build in the simulator for all
+	PowerPC eabi targets, not just eabisim, providing
+	--enable-sim-powerpc is used, or the host compiler is GCC.
+
+Thu Nov  9 14:04:05 1995  Raymond Jou  (rjou@mexican.cygnus.com)
+
+	* mpw-config.in: Add variable with names of SIOW libraries.
+	* mpw-make.sed: Add an action to build SIOWgdb.
+
+Wed Nov  8 19:25:22 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Edit @ENABLE_CFLAGS@ out, mpw-configure can
+	add back in if necessary.
+
+Wed Nov  8 15:59:52 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
+
+	* config/mips/vr4300.mt: Added simulator to default VR4300 build.
+
+Tue Nov  7 16:02:25 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-mips.c (mips_initialize):  Fix brain damage found by
+	Jamie.  Basically had case statement in the wrong place...
+	* (mips_load):  Remove unnecessary `db tty0' command.  It's all
+	handled by mips_initialize now.
+
+Tue Nov  7 12:59:14 1995  Raymond Jou  <rjou@mexican.cygnus.com>
+
+	* mac-gdb.r: Added #ifdef Macgdb.
+
+Tue Nov  7 14:59:51 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
+
+	* remote-mips.c (mips_initialize): Updated to talk to VR4300 RISQ
+ 	monitor board.
+
+Mon Nov  6 11:44:11 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
+
+	* config/mips/{tm-vr4300.h tm-vr4300el.h} (TARGET_MONITOR_PROMPT):
+ 	Change into real strings.
+
+	* remote-sim.c (gdbsim_open): Moved sim_open() call to after
+ 	callback initialisation.
+
+Sun Nov  5 00:07:52 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+        * configure.in (AC_CHECK_HEADERS): add stddef.h.
+
+Fri Nov  3 12:30:43 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (COMMON_OBS): Use corefile.o rather than core.o
+	* core.c:  Rename to corefile.c.
+	* config/pyr/tm-pyr.h, umax-xdep.c, sun386-nat.c, pyr-xdep.c,
+	Makefile.in (SFILES), gould-xdep.c, coredep.c, armtdep.c,
+ 	arm-xdep.c, altos-xdep.c: Change core.c references to corefile.c.
+
+ 	From Graham Stoney <greyham@research.canon.oz.au>.
+	* Makefile.in (remote-array.o):  Add rule to build.
+	(ALLDEPFILES): Add remote-array.c
+	* remote-array.c (baud_rate):  Remove unnecessary declaration.
+	(baudrate):  Remove.
+	(array_files_info):  Print global baud_rate not baudrate.
+
+Sat Nov  4 10:21:58 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (INTERNAL_CFLAGS):  Add ENABLE_CFLAGS.
+	* fork-child.c (fork_inferior):  Add call to
+	TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get
+	control just before the new process executes it's first instruction.
+	* remote-mips.c (mips_initialize):  Cleanup a bit.  Don't try to
+	receive a packet at first.  This speeds up initialization a lot.
+	Use TARGET_MONITOR_PROMPT instead of "<IDT>".
+	(common_breakpoint):  Use rresponse instead of rerrflg to inspect
+	error code.
+	* symfile.c (syms_from_objfile reread_symbols):  Call
+	TARGET_SYMFILE_POSTREAD to allow target specific code to get
+	control after reading new symbols.
+	* target.h:  New macros TARGET_SYMFILE_POSTREAD, and
+	TARGET_CREATE_INFERIOR_HOOK.  See above for descriptions.
+	* config/mips/{irix5.mh nm-irix5.h}:  Delete nm-irix5.h.  Make
+	NAT_FILE point directly at ../nm-sysv4.h.
+	* config/mips/{mipsm3.mh nm-m3.h}:  Delete nm-m3.h.  Make
+	NAT_FILE point directly at ../nm-m3.h.
+	* config/mips/{mipsv4.mh nm-sysv4.h}:  Delete nm-sysv4.h.  Make
+	NAT_FILE point directly at ../nm-sysv4.h.
+	* config/mips/nm-mips.h:  Improve comment at top of file.
+	* config/mips/tm-mips.h (TARGET_MONITOR_PROMPT):  Change
+	definition into a proper string.
+
+Wed Nov  1 20:18:08 1995  Fred Fish  <fnf@cygnus.com>
+
+	* config/i386/tm-i386.h: New file containing generic i*86 target
+	definitions.
+	(TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
+	(IEEE_FLOAT): Moved here from tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
+	(FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
+	(SKIP_PROLOGUE): Moved here from tm-i386v.h.
+	(SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
+	(INNER_THAN): Moved here from tm-i386v.h.
+	(BREAKPOINT): Moved here from tm-i386v.h.
+	(DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
+	(ABOUT_TO_RETURN): Moved here from tm-i386v.h.
+	(REGISTER_SIZE): Moved here from tm-i386v.h.
+	(NUM_REGS): Moved here from tm-i386v.h.
+	(REGISTER_NAMES): Moved here from tm-i386v.h.
+	(EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
+	(FP_REGNUM): Moved here from tm-i386v.h.
+	(SP_REGNUM): Moved here from tm-i386v.h.
+	(PC_REGNUM): Moved here from tm-i386v.h.
+	(PS_REGNUM): Moved here from tm-i386v.h.
+	(FP0_REGNUM):  Moved here from tm-i386aix.h.
+	(FPC_REGNUM):  Moved here from tm-sun386.h.
+	(REGISTER_BYTES):  Moved here from tm-i386aix.h.
+	(REGISTER_BYTE): Moved here from tm-i386aix.h.
+	(REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
+	(MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
+	(REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
+	(MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
+	(EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
+	(STORE_RETURN_VALUE):  Moved here from tm-i386aix.h.
+	(REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
+	(STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
+	(FRAME_CHAIN): Moved here from tm-i386v4.h.
+	(FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
+	(FRAME_SAVED_PC): Moved here from tm-i386os9k.h
+	(FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
+	(FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
+	(FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
+	(FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
+	(FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
+	(PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
+	(POP_FRAME): Moved here from tm-i386v.h.
+	(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET, 
+	CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
+	tm-i386v.h
+	(print_387_control_word, print_387_status_word): Declare prototypes.
+	(struct frame_info, struct frame_saved_regs): Forward decls for
+	prototypes.
+	(SP_ARG0): Moved here from tm-i386v.h.
+
+	* config/i386/tm-i386v.h:
+	(i386/tm-i386.h): Include.
+	(TARGET_BYTE_ORDER): Remove.
+	(IEEE_FLOAT): Remove.
+	(START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
+	(FUNCTION_START_OFFSET): Remove.
+	(SKIP_PROLOGUE): Remove.
+	(i386_skip_prologue): Remove prototype.
+	(SAVED_PC_AFTER_CALL): Remove.
+	(INNER_THAN): Remove.
+	(BREAKPOINT): Remove.
+	(DECR_PC_AFTER_BREAK): Remove.
+	(ABOUT_TO_RETURN): Remove.
+	(REGISTER_SIZE): Remove.
+	(NUM_REGS): Undef before redefine to 16 (no FP support).
+	(REGISTER_NAMES): Undef before redefine.
+	(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
+	(REGISTER_BYTES): Undef before redefine.
+	(REGISTER_BYTE): Undef before redefine.
+	(REGISTER_RAW_SIZE): Undef before redefine.
+	(REGISTER_VIRTUAL_SIZE): Undef before redefine.
+	(MAX_REGISTER_RAW_SIZE): Undef before redefine.
+	(MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
+	(REGISTER_VIRTUAL_TYPE): Undef before redefine.
+	(STORE_STRUCT_RETURN): Undef before redefine.
+	(EXTRACT_RETURN_VALUE): Undef before redefine.
+	(STORE_RETURN_VALUE): Undef before redefine.
+	(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
+	(FRAME_CHAIN): Undef before redefine.
+	(FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
+	(FRAME_SAVED_PC): Undef before redefine.
+	(FRAME_ARGS_ADDRESS): Remove.
+	(FRAME_LOCALS_ADDRESS): Remove.
+	(FRAME_NUM_ARGS): Undef before redefine.
+	(FRAME_ARGS_SKIP): Remove.
+	(FRAME_FIND_SAVED_REGS): Remove.
+	(PUSH_DUMMY_FRAME): Remove.
+	(POP_FRAME): Remove.
+	(CALL_DUMMY): Remove.
+	(CALL_DUMMY_LENGTH): Remove.
+	(CALL_DUMMY_START_OFFSET): Remove.
+	(CALL_DUMMY_BREAKPOINT_OFFSET): Remove
+	(FIX_CALL_DUMMY): Remove.
+	(print_387_control_word): Remove.
+	(print_387_status_word): Remove.
+	(SP_ARG0): Remove.
+
+	* config/i386/tm-symmetry.h: 
+	(TM_SYMMETRY_H): Enclose file in test for define & define if needed.
+	(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
+	tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
+	(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
+	or tm-i386v.h, #undef, and #define to 0.
+	(MAX_REGISTER_RAW_SIZE): Remove.
+	(FRAME_CHAIN): Remove.
+	(FRAMELESS_FUNCTION_INVOCATION): Remove.
+	(FRAME_SAVED_PC): Remove.
+	(print_387_control_word, print_387_status_word): Remove prototypes.
+
+	* config/i386/tm-ptx.h: 
+	(TM_PTX_H): Enclose file in test for define & define if needed.
+	(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
+	tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
+	(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
+	or tm-i386v.h, #undef, and #define to 0.
+	(SDB_REG_TO_REGNUM):  Remove obsolete commented out define.
+	(print_387_control_word, print_387_status_word): Remove prototypes.
+
+	* config/i386/tm-linux.h:
+	(TM_LINUX_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+
+	* config/i386/tm-i386v4.h: 
+	(TM_I386V4_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+	(FRAME_CHAIN):  Moved to tm-i386.h.
+	(FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
+	(FRAME_SAVED_PC): Remove.
+	(sigtramp_saved_pc):  Define as i386v4_sigtramp_saved_pc.
+	(FRAME_NUM_ARGS): Remove.
+
+	* config/i386/tm-i386os9k.h: 
+	(TM_I386OS9K_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+	(NUM_REGS):  Undefine before redefining.
+	(FRAME_CHAIN): Remove.
+	(FRAMELESS_FUNCTION_INVOCATION): Remove.
+	(FRAME_SAVED_PC): Move to tm-i386.h.
+
+	* config/i386/tm-i386nw.h: 
+	(TM_I386NW_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+
+	* config/i386/tm-i386bsd.h:
+	(TM_I386BSD_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+	(FRAMELESS_FUNCTION_INVOCATION): Remove.
+	(FRAME_SAVED_PC): Remove.
+
+	* config/i386/tm-i386aix.h:
+	(i386/tm-i386.h): Include instead of tm-i386v.h.
+	(START_INFERIOR_TRAPS_EXPECTED): Remove.
+	(FP_REGNUM): Remove.
+	(SP_REGNUM): Remove.
+	(PC_REGNUM): Remove.
+	(PS_REGNUM): Remove.
+	(FP0_REGNUM):  Moved to tm-i386.h.
+	(NUM_REGS): Remove.
+	(REGISTER_NAMES): Remove.
+	(REGISTER_BYTES): Moved to tm-i386.h.
+	(REGISTER_BYTE): Moved to tm-i386.h.
+	(REGISTER_RAW_SIZE): Moved to tm-i386.h.
+	(MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
+	(REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
+	(REGISTER_VIRTUAL_TYPE): Removed.
+	(EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
+	(STORE_RETURN_VALUE):  Moved to tm-i386.h.
+
+	* config/i386/tm-sun386.h:
+	(TM_SUN386_H): Enclose file in test for define & define if needed.
+	(i386/tm-i386.h): Include.
+	(TARGET_BYTE_ORDER): Remove.
+	(FUNCTION_START_OFFSET): Remove.
+	(SKIP_PROLOGUE): Remove.
+	(SAVED_PC_AFTER_CALL): Remove.
+	(INNER_THAN): Remove.
+	(BREAKPOINT): Remove.
+	(DECR_PC_AFTER_BREAK): Remove.
+	(ABOUT_TO_RETURN): Remove.
+	(REGISTER_SIZE): Remove.
+	(NUM_REGS): Undefine before defining.
+	(REGISTER_NAMES): Undefine before redefining.
+	(REGISTER_BYTES): Undefine before redefining.
+	(REGISTER_BYTE): Undefine before defining.
+	(FP_REGNUM): Undefine before defining.
+	(PC_REGNUM): Undefine before defining.
+	(FPC_REGNUM):  Undefine before defining.
+	(REGISTER_RAW_SIZE):  Undefine before defining.
+	(FRAME_CHAIN): Undefine before defining.
+	(FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
+	(FRAME_SAVED_PC): Undefine before defining.
+	(FRAME_NUM_ARGS): Moved to tm-i386.h.
+	(MAX_REGISTER_RAW_SIZE): Remove.
+	(MAX_REGISTER_VIRTUAL_SIZE): Remove.
+	(STORE_STRUCT_RETURN): Remove.
+	(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
+	(FRAME_ARGS_ADDRESS): Remove.
+	(FRAME_LOCALS_ADDRESS): Remove.
+	(FRAME_NUM_ARGS): Undefine before defining.
+	(FRAME_ARGS_SKIP): Remove.
+	(FRAME_FIND_SAVED_REGS): Remove.
+	(PUSH_DUMMY_FRAME): Remove.
+	(POP_FRAME): Remove.
+	(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
+	(struct frame_info, struct frame_saved_regs): Remove forward decls
+	for prototypes.
+
+	* config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
+	tm-i386v.h.
+	* config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
+ 	tm-i386v.h.
+
+	* i386-tdep.c (i386_extract_return_value):  Make function visible
+	for all i386 targets, but only assume floating point values returned
+	in floating point registers for I386_AIX_TARGET.
+
+	* i386v-nat.c (i386_register_u_addr):  Enable code to locate
+	floating point regs in user struct.
+	
+Wed Nov  1 15:32:57 1995  Fred Fish  <fnf@cygnus.com>
+
+	* breakpoint.c (breakpoint_re_set): Fix typo in comment.
+	* symtab.c (in_prologue): Document func_start and when it is zero
+	don't call SKIP_PROLOGUE (which typically leads unconditionally to
+	an error when we try to access a prologue at address 0).
+
+Tue Oct 31 13:01:15 1995  Fred Fish  <fnf@cygnus.com>
+
+	* elfread.c: Include elf-bfd.h rather than libelf.h.
+
+Tue Oct 31 10:42:42 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* win32-nat.c (xlate_exception): Treat a stack overflow like a SEGV.
+
+Sun Oct 29 11:22:05 1995  Fred Fish  <fnf@cygnus.com>
+
+	* monitor.c: Include gnu-regex.h rather than system regex.h.
+
+Sat Oct 28 23:51:48 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* defs.h: Test on name __WIN32__ rather than WIN32.
+	* inflow.c (new_tty): Likewise
+	* terminal.h: Likewise.
+	* utils.c (initialize_utils): Likewise.
+	* win32-nat.c (child_create_inferiror): Print error code when failing.
+	* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
+	
+Sat Oct 28 04:52:36 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.h (enum address_class):  Add LOC_UNRESOLVED for
+	a location whose address has to be resolved via the minimal
+	symbol table.
+	* buildsym.c (finish_block), findvar.c (symbol_read_needs_frame,
+	read_var_value), printcmd.c (address_info),
+	symmisc.c (print_symbol, print_partial_symbol):  Handle
+	LOC_UNRESOLVED.
+	* stabsread.c (scan_file_globals):  Change unresolved LOC_STATIC
+	symbols to LOC_UNRESOLVED. Remove rt_common_objfile lookup
+	kludge, global common symbols are now handled by LOC_UNRESOLVED.
+	(scan_file_globals_1):  Move code back to scan_file_globals,
+	delete.
+
+Fri Oct 27 09:54:07 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* breakpoint.c (breakpoint_re_set):  #ifdef GET_LONGJMP_TARGET
+	around calls to create_longjmp_breakpoint.  Why install the
+	breakpoints if we can't find the longjmp target?
+	* infrun.c (wait_for_inferior):  Cleanup comments near call test.
+	* remote-mips.c:  Fixed a bunch of prototypes to avoid char/int
+	complaint from picky compilers.  Add comment to mips_expect.
+	Replace all instances of sr_get_debug with remote_debug.
+	* (mips_readchar):  Don't jam init string to monitor.
+	mips_initialize() handles that.
+	* (mips_receive_header):  Print better message when we get too
+	much garbage.
+	* (mips_request):  Allow caller to pass in buff to allow them to
+	analyze the returned message.
+	* (mips_initialize):  Re-do initialization to try sending a BREAK,
+	a ^C, and then a download escape sequence.  Cleanup protocol
+	startup.  Eliminate sleeps.  Clear breakpoints (if using monitor
+	breakpoints).  Re-init frame.
+	* (mips_detach):  Close down target.
+	* (mips_wait): Handle return status with registers, or breakpoint
+ 	* stuff.
+	* (mips_kill):  Add ^C handling.
+	* (mips_insert_breakpoint mips_remove_breakpoint):  Call new
+	breakpoint stuff if enabled.
+	* (calculate_mask remote_mips_set_watchpoint
+	remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint):
+	Hardware watchpoint/breakpoint stuff.
+	* (common_breakpoint):  Common code for new monitor breakpoint commands.
+	* (mips_load):  Don't use `prompt'.  It's a global variable.
+	* top.c (dont_repeat_command):  New command for use in
+	user-defined commands to suppress auto-repeat (by hittin return key).
+	* valops.c:  Add start of auto function-call abandonment capability.
+
+Thu Oct 26 22:02:27 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-config.in: Add support for PowerMac host, add beginnings
+	of native support.
+	* mpw-make.sed: Disable subdir recursion, edit out useless rule.
+	* mac-xdep.c (Values.h): Don't include.
+	(GestaltEqu.h): Include Gestalt.h instead.
+	(do_mouse_down): Comment out control tracking, needs to be
+	updated to use UPP before will work on PowerMac.
+	* config/xm-mpw.h: New file, all-Mac host support.
+	* config/m68k/xm-mpw.h: Move most definitions into generic Mac
+	support.
+	* config/powerpc/xm-mpw.h: New file, PowerMac host support.
+	
+Thu Oct 26 15:21:32 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* regex.h: Renamed to gnu-regex.h.
+	* regex.c: Renamed to gnu-regex.c.
+	* Makefile.in (POSSLIBS): Refer to gnu-regex.h and gnu-regex.c.
+	(REGEX, REGEX1): Change to gnu-regex.o instead of regex.o.
+	(regex.o): Renamed to gnu-regex.o; refer to gnu-regex.c.
+	(irix5-nat.o, osfsolib.o, gnu-regex.o, solib.o, source.o, symtab.o):
+	Likewise.
+	* irix5-nat.c, osfsolib.c, gnu-regex.c, solib.c, source.c, symtab.c):
+	Include "gnu-regex.h" instead of "regex.h".
+	* alpha-tdep.c (in_prologue): Rename to alpha_in_prologue, to
+	avoid conflicts with symtab.h.
+
+Tue Oct 24 18:30:18 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+	* config/pa/hppahpux.mh: Remove hardcoding of X locations.
+	* Makefile.in: Use X11_CFLAGS, X11_LDFLAGS and X11_LIBS.
+	* configure.in: Link X statically on Solaris, SunOS and HPUX.
+
+Tue Oct 24 12:26:14 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c (monitor_expect_regexp): Same as monitor_expect, but
+ 	with the obvious extension.
+	(monitor_read_memory_single): Use regexp for getmem.resp_delim
+ 	because of parsing ambiguities caused by certain monitors.
+	(monitor_read_memory): Use new regexp stuff to parse
+ 	getmem.resp_delim.
+	* monitor.h (struct memrw_cmd->resp_delim): Document this as a
+ 	regexp.
+	* sh3-rom.c:  Finish off table.  Use new regexp capability for
+	getmem commands.
+
+	* infrun.c (wait_for_inferior):  Disable questionable code near
+	the step range test.  Replace call detection test with much
+	simpler (and more efficient) test that doesn't require prologue
+	examination (as often).
+	* symtab.c symtab.h (in_prologue):  New function that indicates
+	whether or not we are in a function prologue.  This uses the
+	symbol table, and then falls back to prologue examination if that
+	fails.  It's much more efficient for remote debugging because it
+	avoids examining memory, which is very slow.  This is used in
+	wait_for_inferior to determine if we've made a function call that
+	needs to be skipped over (for next/nexti).
+	* mips-tdep.c (after_prologue):  New function, returns the PC
+	after the prologue.  Uses PDRs and the symbol table.
+	(mips_find_saved_regs):  Use in_prologue() to avoid costly
+	prologue examination if possible.
+	(mips_skip_prologue):  Use after_prologue() if possible to avoid
+	costly prologue examination.
+
+Mon Oct 23 16:03:33 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
+
+	* configure.in (configdirs): Added support for the VR4300 default
+ 	builds (mips64*vr4300*el-*-elf*, mips64*vr4300*-*-elf*).
+
+	* configure: Regenerated.
+
+	* remote-mips.c (mips_load): Updated the prompt spotting code to
+ 	make use of the TARGET_MONITOR_PROMPT manifest.
+
+Sat Oct 21 06:11:49 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* alpha-tdep.c, mips-tdep.c (init_extra_frame_info):
+	Do not set saved registers from heuristics for a sigtramp frame.
+
+	* dwarfread.c (enum_type):  Determine signedness of enum type
+	from enumerators.
+
+	* mips-tdep.c:  Include gdb_string.h, gcc -Wall lint.
+
+	* rs6000-nat.c (xcoff_relocate_core):  Fix typo.
+
+	* valops.c (value_repeat):  Fix length of memory transfer to
+	match recent allocate_repeat_value change.
+
+Thu Oct 19 19:04:35 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdbtypes.c (get_discrete_bounds):  Fix typo.
+
+Thu Oct 19 12:15:37 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* defs.h (SEEK_SET, SEEK_CUR): Add default definitions.
+	* dbxread.c, mdebugread.c, os9kread.c (SEEK_SET, SEEK_CUR):
+	Remove default definitions.
+
+	* Makefile.in (CC-LD): Rename to CC_LD, so MPW xform works.
+	(MMALLOC_SRC): Define.
+	(MMALLOC_CFLAGS): Use.
+	(ser-mac.o): Add rule.
+	* dwarfread.c, somread.c, ultra3-nat.c, xcoffread.c: Replace L_SET
+ 	with SEEK_SET in all calls to bfd_seek.
+	* scm-tags.h (scm_tags): Remove excess comma.
+
+	* mpw-config.in: Adapt to work with autoconf'ed configury;
+	build config.h, add empty definitions to mk.tmp.
+	(powerpc-apple-macos): Make it work.
+	* mpw-make.sed: New file, sed commands to translate Unix makefile
+	into MPW syntax.
+	* mpw-make.in: Remove.
+	* mac-gdb.r: New file, was macgdb.r, renamed for consistency
+	with other tools, now includes cfrg resource.
+	* macgdb.r: Remove.
+	* config/m68k/xm-mpw.h: Remove most of contents, replace with
+	include of include/mpw/mpw.h.
+
+Tue Oct 17 10:38:53 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* hppa-tdep.c (frame_chain): Fix more obscure problems caused
+	by system calls that core dump processes without saving all
+	the register state.
+
+	* config/pa/hppahpux.mt (XDEPFILES): Remove bogus definition.
+	* config/pa/hppapro.mt (XDEPFILES): Likewise.
+
+Tue Oct 17 08:04:26 1995  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* NEWS: Fix typo.
+
+Mon Oct 16 18:24:03 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
+
+	* config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Return builtin_type_float
+	for FP registers.
+	(REGISTER_NAMES): Add FP register names.  Remove ticks, stalls, cycles,
+	insts, plr, and tlr.
+	(NUM_REGS, NUM_REALREGS): Increase from 23 to 41.
+	(FPUL_REGNUM, FP0_REGNUM): New macros.
+
+Mon Oct 16 11:27:06 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-mips.c:  Add support for speedy (about 10x faster)
+	downloads.
+
+	* remote-array.c:  Move baud_rate initialization from
+	_initialize_array to array_open.  It was forcing the baud rate of
+	all targets to be 4800 baud!  Seems like I've fixed this before...
+	* config/mips/idt.mt (TDEPFILES):  Remove remote-array.o.  This
+	has *nothing* to do with IDT!!!
+
+
+	* Makefile.in sh3-rom.c config/sh/sh.mt config/sh/tm-sh.h:  Add
+	sh3 monitor support.
+	* monitor.c:  Cleanup regexp compilation stuff to make it easier
+	to use several regexps.
+	* monitor.h:  Get rid of struct rom_cmd_data.  It's no longer used.
+	* config/m68k/tm-monitor.h:  Don't redefine NUM_REGS here.  It just
+	causes GDB to crash.
+
+	* sparcl-tdep.c:  Cleanup serial error handling.
+
+Sun Oct 15 16:19:27 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* rs6000-tdep.c: Don't include a.out.h, improve some formatting.
+
+Fri Oct 13 15:27:49 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* dcache.c:  Change default value of remotecache to off.  It just
+	screws up too many targets.
+	* sparcl-stub.c:  Add prototypes to many forward decls.
+	* Create private copies of strlen, strcpy, and memcpy to prevent
+	chaos when user steps into them.
+	* (trap_low handle_exception):  Clean up DSU support code
+	(hardware breakpoints).  Move lots of stuff from asm-land to
+	C-land (make it much easier to #ifdef if necessary).  Also, use
+	trap 255 to get into break mode instead of doing a DSU register
+	write, which may trash the register.
+	* (putpacket):  Don't check return value of putDebugChar.  It
+	returns void...
+
+Fri Oct 13 14:16:17 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* remote-sim.h: Always include callback.h.
+	(sim_set_callbacks): New declaration.
+
+Fri Oct 13 10:57:40 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* somsolib.c (som_solib_add): Just give a warning if a file
+	mentioned in the dld_list can't be found.
+	* config/pa/tm-hppah.h (FRAME_SAVED_PC_IN_SIGTRAMP): Dig out
+	the PC from the PC queues rather than %r31.
+
+Thu Oct 12 13:36:15 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* corelow.c (core_open): Don't update the to_sections and
+	to_sections_end fields in core_ops here.  It's too late.
+	* irix5-nat.c (solib_add): Update the to_sections and
+	to_sections_end fields in core_ops here if needed.
+	* osfsolib.c (solib_add): Likewise.
+	* rs6000-nat.c (xcoff_relocate_core): Likewise.
+	* solib.c (solib_add): Likewise.
+	* somsolib.c (solib_add): Likewise.
+
+Wed Oct 11 17:25:59 1995  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* Makefile.in (VERSION): Bump version to 4.15.1
+
+Tue Oct 10 15:26:39 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VERSION): Version 4.15 released.
+	* README: Updated for version 4.15.
+	* NEWS: Updated for 4.15 release.
+	
+Tue Oct 10 13:18:50 1995  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in:  Add AC_PROG_YACC
+	* configure:  Regenerate
+	* Makefile.in (BISON):  Remove macro definition.
+	(YACC):  Set from autoconfig.
+	(FLAGS_TO_PASS):  Remove BISON.
+	(TARGET_FLAGS_TO_PASS):  Remove BISON.
+	
+Tue Oct 10 12:25:11 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* win32-nat.c (child_create_inferior): Pass argv correctly.
+	* Makefile.in (win32-nat.o): Add dependencies.
+
+Mon Oct  9 14:36:29 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* NEWS:  Add information about win32 and arm code.
+	* win32-nat.c: Renamed from win32.c.
+	* config/i386/win32.mh: Renamed from config/i386/i386win32.mh.
+	* config/i386/win32.mt: Renamed from config/i386/i386win32.mt.
+	* config/i386/tm-win32.h: Renamed from config/i386/tm-i386win32.h.
+	* config/i386/xm-win32.h: Renamed from config/i386/xm-i386win32.h.
+	* configure.in (i[345]86-*-win32): Updated to cope with filename
+	changes.
+	* configure: Regenerated.	
+
+Sun Oct  8 18:01:04 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.y (yylex):  Also look for '$' following '$'.
+
+Sat Oct  7 22:52:42 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* ch-exp.y (yylex): Fix typo.
+
+Fri Oct  6 11:56:49 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Put callback initializations here.
+	(_initalize_remote_sim): Not here.
+
+Fri Oct  6 17:08:49 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (execute_control_command): Use 0/1 instead of BFD's
+	true/false.
+
+Fri Oct  6 14:43:19 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* sparcl-stub.c:  Include sparclite.h to get access to register
+	fondling macros.
+	* (trap_low):  Save and restore FP regs if necessary.  Also, clean
+	up save and restore of debug unit regs.
+	* (hard_trap_info):  Add more architecturally defined traps.
+	* (set_debug_traps):  Only set FP disabled trap if FP is disabled.
+	* (get_in_break_mode):  Clean up.  Get rid of calls to
+	set_hw_breakpoint_trap().  Also, use write_asi macro.
+	* (handle_exception):  Clean up `g' and `G' commands.  Add `P'
+	command.
+	* (hw_breakpoint):  Why was this here!?  It's gone now...
+
+Fri Oct  6 11:56:49 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
+
+	* callback.c (fdbad): Fix typo in comment.
+	(os_close, os_isatty, os_lseek, os_read, os_write): Use if
+ 	statements rather than || to get correct return value.
+	(os_write_stdout): Pass missing first argument to os_write.
+	* remote-sim.c: Include callback.h.
+	(_initialize_remote_sim): Call sim_set_callbacks and then
+ 	initialize the callbacks.
+
+Thu Oct  5 17:28:09 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* values.c (allocate_repeat_value):  Allocate an array type, and
+	a value of that type; use that instead of setting VALUE_REPEATED.
+	* value.h (struct value):  Remove fields repetitions and repeated.
+	(VALUE_REPEATED, VALUE_REPETITIONS):  Removed, no longer used.
+	* c-valprint.c, ch-valprint.c, eval.c, printcmd.c, valops.c,
+	value.h, values.c: Simplify, since now VALUE_REPEATED is never
+ 	used.
+	* valprint.c (value_print_array_elemen): Removed never-used
+ 	function.
+	
+Thu Oct  5 15:14:36 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* parse.c (write_dollar_variable):  New function.
+
+	* c-exp.y (yylex): Replace code for recognizing '$'
+ 	pseudo-variables with a call to write_dollar_variable.
+	Simplify grammar correspondingly.
+	* f-exp.y:  Likewise.
+	* m2-exp.y:  Likewise.
+	* ch-exp.y:  Likewise.  (Remove function match_dollar_tokens.)
+	* scm-exp.c (scm_lreadr): Call write_dollar_variable to handle '$'.
+
+Thu Oct  5 13:27:30 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* win32.c: New file; support for debugging on windows NT.
+	* configure.in: (i[345]86-*-win32): New target.
+	* configure: Regnerated.
+	* eval.c (evaluate_subexp_standard): Remove unused name.
+	* serial.c (gdb_string.h): Include.
+	* source.c (value.h): Include.
+	* config/i386/i386win32.mh (XDEPFILES): Add win32.o
+	* config/i386/i386win32.mt: New.
+	* config/i386/tm-i386win32.h: New.
+
+Wed Oct  4 18:41:34 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* expression.h (enum exp_code):  Added OP_NAME.
+	* expprint.c (print_subexp):  Add OP_NAME support.
+	* parse.c (length_of_subexp, prefixify_subexp):  Likewise.
+	* scm-lang.c (scm_unpack, in_eval_c, scm_lookup_name):  new function.
+	* scm-lang.h:  Declare builtin_type_scm;  other minor tweaks.
+	* values.c (unpack_long):  If type is SCM, call scm_unpack.
+	* scm-valprint.c (scm_val_print):  Use extract_signed_integer,
+	instead unpack_long
+	* scm-lang.c: More Scheme expression parsing from here ...
+	* scm-exp.c:  ... to here.  New file.
+	Also, provide for gdb to evaluate simple constants and names..	
+	* Makefile.in:  Note new scm-exp.{c,o}.
+	
+Wed Oct  4 17:23:03 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdbtypes.c (get_discrete_bounds):  New function.
+	(force_to_range_type):  Use get_discrete_bounds.
+	* gdbtypes.h (get_discrete_bounds):  Add declaration.
+	* valarith.c (value_bit_index):  Generalize to use get_discrete_bounds.
+	* ch-valprint.c (chill_val_print):  Make (power)sets and bitstring
+	support use get_discrete_bounds and generally be more robust.
+
+Tue Oct  3 16:54:56 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-nrom.c (nrom_ops): Add value for to_thread_alive,
+	add comments naming slots.
+
+Mon Oct  2 21:45:44 1995  Jeff Law  (law@hurl)
+
+	* top.c (build_command_line): Demand arguments for if/while
+	commands.
+
+Mon Oct  2 13:08:01 1995  Jason Molenda   (crash@phydeaux.cygnus.com)
+
+	* Makefile.in (X11_CFLAGS): Set only to @X_INCDIR@.
+
+Sat Sep 30 16:13:36 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* scm-lang.c:  Moved Scheme value printing code to ...
+	* scm-valprint.c:  ... this new file.
+	Also major improvements in support for printing SCM values.
+	* scm-lang.h:  New file.
+	* scm-tags.h:  New file.
+	* Makefile.in:  Note new scm-valprint.{c,o}.
+
+Sat Sep 30 09:35:02 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+	* configure.in: X_INCDIR and X_LIBDIR added.
+	* Makefile.in: @X_INCDIR@ and @X_LIBDIR@ added.
+	* configure: Regnerated.
+
+Fri Sep 29 02:10:05 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* config/arm/tm-arm.h (FRAME_CHAIN, FRAME_CHAIN_VALID):
+	Any pc > LOWESTPC is ok.
+
+	* remote-rdp.c (rdp_init): Take out variable baud rate stuff.
+	(remote_rdp_detatch): Delete.
+	* breakpoint.c (ctype.h): Don't include twice.
+
+	* Makefile.in (remote-rdp.o): Doesn't need remote-rdp.h
+	* callback.c (os_printf_filtered): fix protos.
+	* defs.h (puts_filtered, puts_unfiltered
+	[v|f|]printf_[un]filtered): Make format arg const.
+	* remote-rdp.c (rdp_init): Attept to sync at different
+	baudrates.
+	* utils.c (puts_filtered, puts_unfiltered
+	[v|f|]printf_[un]filtered): Define prototypes with
+	const in the right place.
+
+Thu Sep 28 17:43:39 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* defs.h (enum language):  Add language_scm.
+	* expression.h (enum exp_code):  Added OP_EXPRSTRING.
+	* scm-lang.c:  Preliminary support for Guile /SCM dialect of Scheme.
+	* expprint.c (print_subexp):  Add OP_EXPRSTRING support.
+	* parse.c (length_of_subexp, prefixify_subexp):  Likewise.
+	* valops.c (find_function_in_inferior):  New function.
+	(value_allocate_space_in_inferior):  New function.
+	(allocate_space_in_inferior):  Redefine using previous function.
+	* Makefile.in (SFILES):  Add scm-lang.c.
+	(COMMON_OBS):  Add scm-lang.o
+
+Thu Sep 28 14:32:11 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* callback.[ch]: New files.
+	* remote-rdp.c: Support for the ARM RDP monitor.
+	* Makefile: Update.
+	* arm-tdep.c (arm_othernames): New.
+	(_initialize_arm_tdep): install 'othernames' command.
+	(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
+	* configure.in: Check for termios.h, termio.h and sgtty.h.
+	(i[345]86-*-win32*): New host.
+	* configure: Regenerated.
+	* inflow.c: Clean up inclusions.
+	* main.c (main): Check for WINGDB, not WIN32.
+	* printcmd.c (do_examine): Put QUIT test in loop.
+	* remote-hms.c (e7000_load): Delete.
+	(hms_ops): Point to generic_load instead.
+	* remote-hms.c (hms_ops): Point to generic_load.
+	* remote-sim.c (sim_callback_write_stdout): Becomes
+	gdbsim_write_stdout.
+	(gdbsim_load): Call generic_load.
+	* remote-utils.c (gr_load_image): Delete.
+	* ser-unix.c (terminal.h): Include instead of havig
+	own #if tree.
+	(hardwire_flush_input): Reset input buffer too.
+	* source.c (openp): If WIN32 then open file in binary mode.
+	* terminal.h: Configure IO mechanism using autoconf defines if
+ 	available and not overriden.
+	* utils.c (quit, pollquit, notice_quit): WIN32 check becomes
+ 	WINGDB check.
+
+	* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o.
+	* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes
+	TARGET_BYTE_ORDER_SELECTABLE.
+	(ADDR_BITS_REMOVE): New.
+	(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
+	(INST_xx): New.
+	(FRAME_FIND_SAVED_REGS): Pass the right argument.
+	(arm_get_next_pc): Declare.
+
+Wed Sep 27 10:14:36 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (search_struct_field):  Also allow "else" as a variant
+	name.
+	* eval.c (evaluate_struct_tuple):  New function.  Used to evaluate
+	structure tuples.  Now also handles Chill variant records.
+	(get_label):  New function, used by evaluate_struct_tuple.
+	(evaluate_subexp_standard case OP_ARRAY):  Use evaluate_struct_tuple.
+	(evaluate_labeled_field_init):  Removed.
+
+	* valops.c (search_struct_field):  Generalize to work with Chill
+	variant records.
+
+Sat Sep 23 01:22:23 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_partial_symbols):  Reset includes_used
+	and dependencies_used after finishing the partial symbol table.
+
+	* rs6000-tdep.c (push_dummy_frame):  Handle lr_offset of zero
+	correctly.
+
+	* rs6000-nat.c (xcoff_relocate_core):  Don't relocate data
+	addresses for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE
+	is defined.
+	* xcoffread.c:  gcc -Wall lint. Remove traceback table reading
+	code. The existing code tried to add parameter information for
+	functions compiled without -g, which cannot be done properly
+	for optimized code and produced misleading parameter displays.
+	(ef_complaint, eb_complaint):  Make a local static copy to avoid
+	dependency on coffread.c.
+	(read_xcoff_symtab, process_xcoff_symbol, scan_xcoff_symtab):
+	Enter C_EXT/C_HIDEXT symbols into the minimal symbol table only.
+	(read_xcoff_symtab):  Ignore C_STAT section auxiliary entry
+	symbols. Complain about unmatched .ef and .eb symbols instead of
+	segfaulting.
+	(process_xcoff_symbol):  Determine value of C_GSYM symbols via
+	the global_sym_chain mechanism in stabsread.c.
+	(xcoff_new_init):  Call stabsread_new_init and buildsym_new_init.
+	(init_string_tab):  Initialize length field bytes in the strtbl.
+	(scan_xcoff_symtab):  Skip symbols that start with `$' or `.$'.
+	Set first_fun_line_offset for symbols with two auxents only.
+
+Wed Sep 20 21:06:35 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* op50-rom.c (op50n_cmds): Send ".\r" after the interrupt
+	character.
+
+Wed Sep 20 13:12:56 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (maintainer-clean): New target, synonym for
+	realclean.  Add GNU standard maintainer-clean echos.
+	* gdbserver/Makefile.in (maintainer-clean): New target, synonym
+	for realclean.
+	* nlm/Makefile.in (maintainer-clean): Likewise.
+
+Wed Sep 20 08:16:03 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* defs.h (xmalloc, xrealloc): Delete, they're declared in libiberty.h.
+	(GETENV_PROVIDED, FCLOSE_PROVIDED): New.
+	* doc/gdbint.texinfo (GETENV_PROVIDED, FCLOSE_PROVIDED): Document.
+	* remote-sim.[ch] (sim_callback_write_stdout): New.
+
+Tue Sep 19 15:28:58 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdbtypes.c (create_set_type):  Set TYPE_LENGTH in bytes, not bits.
+	* valops.c (value_bitstring):  TYPE_LENGTH is bytes, not bits.
+
+	* gdbtypes.c (force_to_range_type):  Calculate upper limit of
+	TYPE_CODE_CHAR depending on TYPE_LENGTH (instead of just using 255).
+
+Mon Sep 18 01:43:42 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (auto_solib_add_at_startup): Delete definition.  No
+	longer needed.
+
+Sat Sep 16 13:23:36 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-mips.h (UNUSED_REGNUM):  Define.
+	* mipsv4-nat.c (supply_gregset):  Fill UNUSED_REGNUM register
+	with zero.
+
+Thu Sep 14 17:35:24 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-sim.c (gdbsim_create_inferior):  Back out change that
+	broke all simulator configurations except the rs6000.
+
+Thu Sep 14 14:44:59 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* monitor.c (monitor_expect): Discard NULL characters.
+
+Thu Sep 14 14:12:30 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* infcmd.c: Add extern declaration for auto_solib_add_at_startup.
+
+Wed Sep 13 13:33:58 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* symfile.c: Move global variable auto_solib_add_at_startup from
+	solib.c to symfile.c.
+	* solib.c: ditto.
+	* symfile.h: Add extern declaration of the above mentioned variable.
+	* infcmd.c: Take out extern declaration, since it's in symfile.h.
+
+Thu Sep 14 12:39:35 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* coffread.c (coff_symtab_read):  Complain about unmatched .ef and
+	.eb symbols instead of segfaulting.
+
+Wed Sep 13 13:33:58 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Use subfile language instead of
+	global language. Improve efficiency.
+
+Wed Sep 13 08:45:02 1995  Jeff Law  (law@fast.cs.utah.edu)
+
+	* somsolib.c (auto_solib_add_at_startup): Define new global variable.
+	(som_solib_create_inferior_hook): Don't add libraries if
+	auto_solib_add_at_startup is zero.
+	(_initialize_som_solib): Add command to toggle
+	auto_solib_add_at_startup.
+
+Tue Sep 12 19:37:24 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* monitor.c (monitor_make_srec): Fix thinkos in computation
+	of addr_size.
+
+Tue Sep 12 15:46:18 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Add a patch to handle cfront
+	generated stabs that each field is in full mangled name.
+
+	* stabsread.c: To include language.h and expression.h for the reason
+	above.
+	
+	* infcmd.c (attach_command): Add solibs only when
+	auto_solib_add_at_startup is set.
+
+Mon Sep 11 17:22:35 1995  Fred Fish  <fnf@cygnus.com>
+
+	* NEWS:  Add information about remote target caching.
+
+Sun Sep 10 15:36:21 1995  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h: Only include mmalloc.h if NO_MMALLOC is not
+	defined.
+
+Sun Sep 10 10:24:48 1995  Michael Tiemann  <tiemann@axon.cygnus.com>
+
+	* tm-ppc-eabi.h (PC_IN_CALL_DUMMY): Redefine this to work with the
+	simulator.  FIXME.
+
+	* rs6000-tdep.c (push_dummy_frame): Calculate the correct link
+	register offset from the current frame (don't assume it is always 8).
+	(push_dummy_frame): Add comment about having only 4096 bytes of
+	stack space in the simulator (by default).
+
+	* remote-sim.c (gdbsim_create_inferior): Call
+	`add_text_to_loadinfo' so that gdb can find TOC entries when
+	calling functions in the inferior.
+
+Sun Sep 10 09:00:28 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (fill_fpregset):  Fix incorrect FP_MAX_REGNUM
+	substitution.
+	(supply_fpregset):  Use FP_MAX_REGNUM.
+
+Sat Sep  9 08:21:52 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* stabsread.c (read_enum_type):  Exit loop for putting pending
+	enum symbols into the enum type correctly if we had no pending
+	symbols on entry to read_enum_type.
+
+Fri Sep  8 12:57:41 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* inferior.h: Add extern declaration of inferior_environ.
+	* solib.c (solib_map_sections): To get inferior's env instead of
+	gdb's for LD_LIBRARY_PATH, same for PATH.
+	
+	* solib.c (solib_map_sections): Copy full path name into so_list
+	structure so that symbol_file_add can find it.
+
+Tue Sep  5 17:47:53 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* config/sparc/tm-sp64.h (REGISTER_RAW_SIZE): Lower 32 fp regs
+	have size 4.
+	(REGISTER_VIRTUAL_SIZE): Likewise.
+	(REGISTER_VIRTUAL_TYPE): Lower 32 fp regs have type float.
+	Upper 32 fp regs have type double.
+	* sparc-tdep.c (NUM_SPARC_FPREGS): Replace with
+	(FP_REGISTER_BYTES): this, and update all uses.
+	(FP_MAX_REGNUM): Define if not already.
+	(get_saved_register): Handle new sparc64 fp regs.
+	(sparc_frame_find_saved_regs): Likewise.
+	(sparc_print_register_hook): Only print fp regs < 32 as doubles.
+	Add code to handle long doubles when gdb does.
+	(_initialize_sparc_tdep): Use print_insn_sparc64 if sparc64.
+
+Sat Sep  2 06:41:26 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* configure.in:  Explicitly `exit 0' for broken shells.
+	* configure:  Rebuilt.
+
+	* symtab.c (list_symbols):  Add missing blank after
+	`<function, no debug info>' output.
+
+	* valops.c (value_assign):  Handle truncation when assigning
+	to bitfields. Use value_copy to construct the return value
+	from toval.
+	* values.c (value_copy):  Copy VALUE_FRAME and VALUE_OPTIMIZED_OUT.
+
+Fri Sep  1 08:25:50 1995  James G. Smith  <jsmith@beauty.cygnus.com>
+
+	* configure (mips64*vr4300*-*-elf): Support added.
+	* remote-mips.c (mips_readchar): Change to allow build-time prompt
+ 	string.
+	* config/mips/tm-mips.h: Added TARGET_MONITOR_PROMPT.
+	* config/mips/{vr4300.mt, vr4300el.mt, tm-vr4300.h,
+ 	tm-vr4300el.h}: Added.
+
+Thu Aug 31 12:48:04 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
+
+	* config/sh/sh.mt (SIM): Add -lm.
+
+Wed Aug 30 18:10:57 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* rmote-nindy.c (non_dle, nidy_resume, nindy_wait): Changes to 
+	conform to GNU coding standards.
+
+	* solib.c (match_main): Modify to follow GNU coding conventions.
+
+Mon Aug 28 17:07:26 1995  Kung Hsu  <kung@lisa.cygnus.com>
+
+	* remote.c (remote_wait): Revert 19 July my change which should be
+	customer specific.
+
+Sat Aug 26 00:26:11 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  Handle sh.value of zero for enums.
+	Determine signedness of enum type from enumerators.
+	(parse_type):  Handle btIndirect types, handle fBitfield for
+	some non-member types.
+	(upgrade_type):  Use TYPE_FLAG_TARGET_STUB for arrays with
+	unknown length.
+	(cross_ref):  Handle stIndirect forward reference to btTypedef.
+
+	* stabsread.c (read_enum_type):  Determine signedness of enum
+	type from enumerators.
+
+	* top.c (execute_command):  Remove trailing whitespace from
+	command arguments, except for `set' and `complete' commands.
+	(validate_comname):  Allow underscores in user defined command
+	names.
+
+	* values.c (modify_field):  Change `Value does not fit in %d bits'
+	error to a warning. Exclude sign extension bits of negative field
+	values from fit check.
+
+Fri Aug 25 11:31:29 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure.in (powerpc*-*-eabisim*): Only link in the simulator
+	if the target is powerpc{,le}-*-eabisim*, since the simulator
+	needs GCC to build.
+	* config/powerpc/ppc{,le}-sim.mt: Cloned from ppc{,le}-eabi.mt.
+	* config/powerpc/ppc{,le}-eabi.mt: Remove simulator support.
+	* config/powerpc/tm-ppc{,le}-sim.mt: Include tm-ppc{,le}-sim.h.
+
+Wed Aug 23 16:55:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/ppc{,le}-eabi.mt (SIM_OBJS, SIM): Link in the
+	PowerPC simulator.
+
+Tue Aug 22 02:00:47 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* tm-hppa.h (EXTRACT_RETURN_VALUE): Fix for FP values.
+
+	* tm-hppa.h (STORE_RETURN_VALUE): Fix to work with -msoft-float
+	calling conventions too.  Use the TYPE of the return value, not
+	its length to determine if it should also be copied into the
+	floating point registers.
+
+	* tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Delete.  Causes more
+	problems than it fixes.
+	* hppa-tdep.c (skip_prologue): If we exit the main loop without
+	finding all the register saves, retry again without looking for
+	the registers we could not find the first time.
+
+Mon Aug 21 23:39:56 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (frame_chain_valid): Handle systems where "$START$"
+	calls "main" directly.
+	(skip_prologue): Always assume arguments were saved into the stack
+	since GCC will do so without setting the magic Args_Saved bit in
+	the unwind descriptor.
+
+Mon Aug 21 11:49:17 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-udi.c (udi_wait): Mask off high bits of stop reason.
+	* remote-udi.c (fetch_register): For unfetchable regs, pretend it's
+	done. Fix a bug.
+
+Mon Aug 21 00:45:17 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Makefile.in (install): Remove "brokensed" hack, unnecessary now
+	that we're using autoconf.
+	(uninstall): Likewise.
+
+
+Sat Aug 19 01:19:34 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdbtypes.c (recursive_dump_type):  Add dont_print_type_obstack
+	to inhibit infinite recursion when printing aggregate types.
+
+Fri Aug 18 17:48:55 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* dcache.c (dcache_write_line): Write dirty lines right.
+
+Fri Aug 18 06:26:56 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (isbranch):  Fix typo which caused wrong
+	target addresses for annulled branches.
+
+Wed Aug 16 21:54:39 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (PROLOGUE_FIRSTLINE_OVERLAP): Define.
+
+Tue Aug 15 07:51:21 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* remote.c (remote_write_bytes): Chop up large transfers.
+
+Mon Aug 14 17:56:36 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gcc.patch: Remove, relevant only to long-ago versions of GCC.
+
+Mon Aug 14 13:43:01 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/sparc/tm-sparclite.h: Define FRAME_CHAIN_VALID_ALTERNATE.
+	* blockframe.c (inside_main_func): If main func addr range not set,
+	try to set it now.
+
+Sat Aug 12 15:34:54 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* config/powerpc/xm-aix.h (FIVE_ARG_PTRACE): Define.
+	* config/rs6000/xm-rs6000.h (FIVE_ARG_PTRACE): Likewise.
+
+	* configure.in: Recognize aix4 specially as some aspects
+	of aix4 need different handling than aix3.
+	* configure: Updated.
+	* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: New files
+	specific to aix4 support on the power pc.
+	* config/powerpc/tm-ppc-aix.h (DONT_RELOCATE_SYMFILE_OBJFILE): Do
+	not defined.  The aix4 specific target files will do that.
+	* config/rs6000/{aix4,mh,aix4,mt,tm-rs6000-aix4.h}: New files
+	specific to aix4 support on the rs6000.
+
+	* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR): Don't
+	do the conversion if the pointer is not a magic aix function
+	pointer.
+	* rs6000-tdep.c: Include objfiles.h and symtab.h.
+ 	(is_magic_function_pointer): New function.
+
+	* rs6000-tdep.c (skip_prologue): Refine check for frameless
+	functions.  Handle b .+4 emitted by aix4 compilers.  Only
+	allow one load of a minimal toc pointer.  Handle aix4 compiler's
+	code for alloca.
+
+	* rs6000-tdep.c (find_toc_address): Report an error if no toc was
+	found rather than possibly core dumping.
+
+	* partial-stab.h: Handle extra field generated by the aix4 compiler
+	for enumerations.
+	* stabsread.c (read_enum_type): Likewise.
+
+Sat Aug 12 03:18:04 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* rs6000-tdep.c (extract_return_value):  Fix returning of values
+	whose length is less than the register size for big endian targets.
+
+Fri Aug 11 13:04:32 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* symtab.c (list_symbols): if break command set breakpoint on
+	matched symbol.
+
+Wed Aug  9 18:59:05 1995  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h (strchr, strrchr, strstr, strtok, strerror): Enclose in
+	#ifndefs to protect against previous definitions as macros.
+
+Wed Aug  9 14:51:36 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* xcoffread.c (xcoff_symfile_offset): Revert an unwanted change
+	that got in accidentally with Aug 1 change.
+
+Sat Aug  5 09:07:28 1995  steve chamberlain  <sac@slash.cygnus.com>
+ 
+ 	* remote-hms.c (hms_cmds): Get reg term right.
+	* monitor.c (monitor_fetch_register):  If we see
+	a non-hex digit, just stop reading.  
+ 	* remote.c (remote_wait): Change way $O is handled.
+ 
+Wed Aug  9 11:42:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	 * configure.in (powerpc-*-aix*): Recognize as a new gdb host
+	 and target.
+	 (powerpc-*-eabi*): Don't set configdirs.
+	 (powerpcle-*-eabi*): Likewise.
+	 * configure: Updated.
+	 * rs6000-nat.c (vmap_ldinfo): Don't relocate data addresses
+	 for the main objfile if DONT_RELOCATE_SYMFILE_OBJFILE is
+	 defined.
+	 * config/powerpc/{aix.mh,aix.mh}: Host and target makefile fragments
+	 for powerpc running aix4.
+	 * config/powerpc/{nm-aix.h, tm-ppc-aix.h, xm-aix.h}: Native, target
+	 and host include files for powerpc running aix4.
+
+Wed Aug  9 08:11:45 1995  Stan Shebs  <shebs@cygnus.com>
+
+	* top.c (target_output_hook): Really make it match defs.h (char *
+	is not the same as unsigned char *).
+
+Tue Aug  8 15:13:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (CXX_FOR_TARGET): Don't use ${rootme}/../gcc/xgcc
+	unless it is present.
+
+Tue Aug  8 10:50:15 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* top.c (target_output_hook): Make declaration match the one
+	in defs.h.
+
+	* symfile.c (add_psymbol_to_list): Initialize SYMBOL_SECTION.
+	(add_psymbol_addr_to_list): Likewise.
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Likewise.
+
+Mon Aug  7 15:34:29 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* top.c (target_output_hook): New definition.
+	* stack.c (gdb_string.h): Include after defs.h
+	* defs.h (target_output_hook): New declaration.
+	* source.c (mod_path): Fix Win32 \ handling.
+
+Sun Aug  6 22:14:25 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (frame_saved_pc): Don't try to dig a return pointer
+	out of a long branch stub.
+
+Fri Aug  4 13:37:31 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* xcoffread.c (process_linenos): Fix typo in last change.
+
+Thu Aug  3 22:01:26 1995  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* ch-exp.y (write_lower_upper_value):  Add prototype so bison
+	generated parser will insert prototype before first func usage.
+	Bison and byacc order the output sections differently.  Also
+	make function static.
+
+Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Update all FSF addresses except those in COPYING* files.
+
+Thu Aug  3 01:38:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/alpha/tm-alpha.h (EXTRA_FRAME_INFO):  Add pc_reg field.
+	(SKIP_TRAMPOLINE_CODE):  Define.
+	* alpha-tdep.c (alpha_frame_saved_pc):  Use pc_reg field from
+	frame to find the saved pc register.
+	(alpha_saved_pc_after_call):  Skip over shared library trampoline
+	before trying to find the saved pc register.
+	(find_proc_desc):  Copy PROC_PC_REG from found proc_desc
+	to heuristic proc_desc.
+	(init_extra_frame_info):  Initialize pc_reg field in frame.
+
+Wed Aug  2 18:00:36 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.in (m68*-est-*): Use monitor target config.
+	* configure: Update.
+	* config/m68k/est.mt, config/m68k/tm-est.h: Delete.
+	* config/m68k/monitor.mt, config/m68k/tm-monitor.h: Fix comments.
+
+Tue Aug  1 22:52:53 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VERSION): Bump to 4.14.2
+
+Tue Aug  1 16:04:36 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* xcoffread.c (process_linenos): The value in include file symbol
+	should point to line number table. Currently this value is not
+	set correctly by AIX ld. A fix to get around this bug.
+
+Tue Aug  1 11:44:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* configure.in: Check for working mmap, ansi headers, string.h,
+	strings.h, and memory.h.
+	* configure: Regenerated.
+
+	* gdb_stat.h: New file, "portable" <sys/stat.h>.
+	* gdb_string.h: New file, "portable" <string.h>.
+
+	* altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c,
+	convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c,
+	gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c,
+	i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c,
+	mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c,
+	rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c,
+	symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c,
+	ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h"
+	instead of <sys/stat.h>.
+
+	* alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c,
+	ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c,
+	core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c,
+	dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c,
+	exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c,
+	fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c,
+	inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c,
+	m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c,
+	monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c,
+	printcmd.c, procfs.c, regex.c, remote-adapt.c,
+	remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c,
+	remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c,
+	remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c,
+	remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c,
+	remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c,
+	solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c,
+	symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c,
+	valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include
+	"gdb_string.h" instead of <string.h>.
+
+	* config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h,
+	sparc/xm-sun4os4.h (HAVE_MMAP): Removed.
+
+	* config/xm-lynx.h, config/i386/xm-ptx.h,
+	config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h,
+	config/mips/xm-irix3.h, config/mips/xm-mips.h,
+	config/mips/xm-news-mips.h, config/mips/xm-riscos.h,
+	config/pa/hppah.h, config/rs6000/xm-rs6000.h,
+	config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h,
+	config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h,
+	config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed.
+	* config/mips/xm-irix3.h, config/mips/xm-mips.h,
+	config/pa/xm-hppah.h (memcpy, memset): Removed declarations.
+
+Tue Aug  1 02:08:30 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (mips_extract_return_value):  Fix returning of
+	values whose length is less than the register size for big endian
+	targets.
+	* alpha-tdep.c (alpha_extract_return_value,
+	alpha_store_return_value):  Use alpha_convert_register_to_*
+	to handle functions returning "float" correctly.
+
+Mon Jul 31 19:12:48 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* h8500-tdep.c: General linting and cleanup.
+	(opcodes/h8500-opc.h): Don't include.
+	(code_size, data_size): Make static.
+	(frame_locals_address, frame_args_address): Remove.
+	(h8300_pop_frame): Rename to h8500_pop_frame.
+	(big_command, medium_command, compact_command, small_command):
+	Define as regular functions rather than with macro trickery.
+	(tm_print_insn): Set to correct disassembler function.
+	* config/h8500/tm-h8500.h: Minor cleanup, add prototypes.
+	(ABOUT_TO_RETURN): #if 0 out.
+	(FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS): Use usual define.
+	(GDB_TARGET_IS_H8500): Remove duplicate	definition.
+	(regoff): Remove, never used.
+	* config/h8500/h8500.mt (TDEPFILES): Add monitor.o.
+
+Mon Jul 31 14:32:30 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* configure.in: Check for unistd.h.
+	* configure: Regenerated.
+
+	* command.c, cp-valprint.c, fork-child.c, i386-tdep.c,
+	i386b-nat.c, inflow.c, main.c, maint.c, objfiles.c, solib.c,
+	source.c, stack.c, symfile.c, top.c, utils.c: Include strings.h
+	and/or unistd.h to bring prototypes into scope.
+
+Sun Jul 30 01:40:11 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* rs6000-tdep.c (frame_saved_pc):  Check for signal handler caller
+	before trying to determine the start of the function.
+	(skip_prologue):  Skip subroutine call which might save the
+	floating point registers only if it is within the first three
+	instructions.
+	Reinstate setting of alloca_reg if setup of a gcc frame pointer
+	is found.
+	(frame_get_cache_fsr):  Use new fields in rs6000_framedata.
+
+Sat Jul 29 14:43:35 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* sparclite: Removed subdirectory.  aload and eload are now in
+	utils/sparclite, low-level library is in libgloss.
+	* configure.in (sparclite*): Don't configure sparclite subdir.
+	* configure: Update.
+	* Makefile.in (TARDIRS): Remove, no longer used.
+
+Sat Jul 29 01:45:56 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* procfs.c (unconditionally_kill_inferior):  Clear current signal
+	if PROCFS_NEED_CLEAR_CURSIG_FOR_KILL is defined.
+	* config/alpha/nm-osf3.h (PROCFS_NEED_CLEAR_CURSIG_FOR_KILL):  Define.
+
+	* alpha-tdep.c:  Move sigtramp handling of saved registers from
+	read_next_frame_reg to alpha_find_saved_regs, handle saved
+	floating point registers.
+	* mips-tdep.c:  Move sigtramp handling of saved registers from
+	read_next_frame_reg to mips_find_saved_regs, handle saved
+	floating point registers.
+	* config/mips/tm-irix3.h, config/mips/tm-irix5.h,
+	config/mips/tm-mipsv4.h (SIGFRAME_FPREGSAVE_OFF):  Define. 
+
+	* sparc-tdep.c (sparc_pc_adjust):  Fix check for `unimp'
+	instruction to handle functions returning structures with
+	large sizes properly.
+
+Fri Jul 28 11:50:17 1995  steve chamberlain  <sac@slash.cygnus.com>
+
+	* configure, configure.in (z8k-*-sim): deleted.
+
+Thu Jul 27 12:49:28 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* lynx-nat.c (child_wait): Handle threads exiting.
+
+Thu Jul 27 07:47:50 1995  Michael Meissner  <meissner@cygnus.com>
+
+	* rs6000-tdep.c (skip_prologue): Don't assume the update stack
+	instruction is the last in the prologue, since xlc stores the lr
+	after the stack update.  Make sure offset is correct sign for
+	large frames.
+	(frame_saved_pc): Move test for signal before frameless.
+
+	* config/rs6000/tm-rs6000.h (DEFAULT_LR_SAVE): Define.
+	* config/powerpc/tm-ppc-eabi.h (DEFAULT_LR_SAVE): Redefine.
+
+Thu Jul 27 01:22:08 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Rewrite code for calling
+	into shared libraries.
+
+Wed Jul 26 23:33:34 1995  Michael Meissner  <meissner@cygnus.com>
+
+	* config/rs6000/tm-rs6000.h (rs6000_framedata): Add offsets the
+	gprs, fprs, lr, and cr is stored at.
+	(FRAME_FIND_SAVED_REGS): Use new fields in rs6000_framedata.
+	(function_frame_info): Delete declaration.
+	(SKIP_PROLOGUE): Skip_prologue is now passed a rs6000_framedata
+	structure to fill in.
+	(FRAMELESS_FUNCTION_INVOCATION): Function now longer takes a
+	second argument.
+	(FRAME_SAVED_PC): Call frame_saved_pc.
+
+	* rs6000-tdep.c (skip_prologue): Recognize V.4 prologues as well
+	as AIX style.  Fill in rs6000_framedata structure.  Remember where
+	the gprs, fprs, cr, and lr are saved.
+	(pop_frame): Use skip_prologue, not function_frame_info, and use
+	new rs6000_framedata fields.
+	(function_frame_info): Function deleted.
+	(frameless_function_invocation): Separate frame_saved_pc support
+	to new function.  Recognize V.4 frames.
+	(frame_saved_pc): New function.
+	(frame_get_cache_fsr): Use skip_prologue, not function_frame_info.
+	(frame_initial_stack_address): Ditto.
+
+Wed Jul 26 01:00:37 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* remote.c:  Add documentation for extended protocol operations
+	and for thread_alive change from a couple weeks ago.
+	(extended_remote_ops): Declare and define a new target vector
+	for the extended remote protocol.
+	(extended_remote_restart): New function to restart the remote
+	server & process.
+	(remote_open): Just a stub routine.
+	(extended_remote_open): New function to start a remote session
+	using the extended gdb remote protocol.
+	(remote_open_1): New function containing code common to both
+	remote_open and extended_remote_open.
+	(remote_mourn, extended_remote_mourn, remote_mourn_1): Similarly.
+	(extended_remote_create_inferior): New function for the extended
+	remote target.
+	(initialize_remote): Add the extended_remote_ops target vector.
+	* gdbserver/server.c (main, case '!'): Set extended_protocol.
+	(main, case 'k'): If the extended protocol is in use, kill the
+	inferior then start a new one.
+	(main, case 'R'): New command to restart the remote server and
+	inferior process.  Only supported when using the extended
+	protocol.
+	(main, server loop): If the inferior terminates while using the
+	extended protocol then start a new one.  If getpkt fails when
+	using the extended protocol then exit.
+
+Tue Jul 25 11:43:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mdebugread.c (psymtab_to_symtab_1): Relocate encoded stab
+	line numbers using the psymtab's section offsets.
+
+Tue Jul 25 10:43:27 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/rs6000/tm-rs6000.h (rs6000_framedata): Rename from
+	aix_framedata.  Change all uses.
+	* rs6000-tdep.c: Change all aix_framedata -> rs6000_framedata.	
+
+Sat Jul 22 23:44:18 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* defs.h (ATTR_FORMAT): Disable if ANSI_PROTOTYPES is not defined.
+
+Fri Jul 21 16:50:28 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* lynx-nat.c (child_thread_alive): New function.  Somehow I
+	forgot to check this in with all the other thread_alive changes.
+
+Thu Jul 20 22:22:34 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c (som_symtab_read): Add unsatisfied common symbols to
+	the minimal symbol table.  All common symbols are "unsatisfied"
+	when -E is passed to the linker.
+
+Thu Jul 20 15:04:57 1995  Fred Fish  <fnf@cygnus.com>
+
+	* top.c (show_endian): Cast first arg of printf_unfiltered to
+	correct type of "char *".
+
+Thu Jul 20 14:18:51 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* lynx-nat.c (child_wait): A thread_id of zero from wait apparently
+	means the process is single threaded, so there's no need to add
+	it to the thread list.  Handle case where multi-threaded process
+	reverts back to a single-threaded process.
+
+	* gdbserver/low-hppabsd.c: Remove error declaration.
+	* gdbserver/low-sparc.c: Likewise.
+	* gdbserver/low-sun3.c: Likewise.
+	* gdbserver/server.h: Remove error and fatal declaration.
+	* gdbserver/utils.c (error): Update to be compatable with recent
+	changes in defs.h.
+	(fatal): Likewise.
+
+Wed Jul 19 22:42:43 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/m68k/tm-m68kv4.h (DWARF_REG_TO_REGNUM):  Define to
+	correctly map floating point registers numbers.
+
+	* dwarfread.c (locval, new_symbol):  Handle variables that are
+	optimized out.
+
+	* mdebugread.c:  Replace all uses of builtin_type_* with
+	mdebug_type_*. Define and initialize mdebug_type_*.
+
+	* serial.h (serial_close):  Add additional argument `really_close'.
+	(SERIAL_CLOSE):  Update serial_close call accordingly.
+	(SERIAL_UN_FDOPEN):  Use serial_close to handle refcnt properly.
+	* serial.c (serial_close):  Handle `really_close'.
+	* serial.h (scb_base):  Moved to serial.c, made static.
+
+	* valops.c (value_addr):  Don't coerce arrays.
+	(typecmp):  Coerce arrays instead of calling value_addr if necessary.
+
+Wed Jul 19 18:19:28 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Richard Earnshaw (rearnsha@armltd.co.uk):
+	* infrun.c (wait_for_inferior): Set the convenience variable
+	$_exitcode to the termination code of the inferior.
+	* top.c (quit_command): Accept optional expression to use
+	as parameter to exit().
+
+Wed Jul 19 13:15:32 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote.c (remote_wait): When getting registers, check endianess and
+	do conversion if necessary.
+
+Tue Jul 18 00:41:31 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdbserver/low-hppabsd.c: New file.
+	* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
+	* config/pa/hppabsd.mh (XDEPFILES): Add ser-tcp.o.
+	(GDBSERVER_DEPFILES): Add low-hppabsd.o.
+	* config/pa/hppaosf.mh: Likewise.
+
+Mon Jul 17 21:35:18 1995  Fred Fish  <fnf@cygnus.com>
+
+	* dache.c (struct dcache_block): Change data member from unsigned
+	char to char, since everything passed in and out of dcache is char
+	or casted to appropriate type anyway.
+	(dcache_alloc):  Move assignment of db out of test and combine
+	separate tests into if-else.
+	(dcache_peek_byte):  Change ptr from unsigned char* to char*.
+	(dcache_peek_byte):  Remove now unnecessary cast in read_memory call.
+	(dcache_peek):  Change cast of incoming data arg.
+	(dcache_poke):  Change cast of addr of incoming data arg.	
+	(dcache_info):  Mask data passed to printf_filtered to lsbyte only.
+	(dcache_info):  Change printf_filtered arg from "% 2x" to " %2x".
+	* target.c (debug_to_thread_alive): Change return type to int and
+	return zero, for type compatibility with other *_thread_alive
+	funcs.
+	(cleanup_target): Change cast of ignore function to match type of the
+	to_thread_alive member.
+	* defs.h (error_hook): Add ATTR_NORETURN.
+	* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
+	__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
+	* remote.c (remote_wait): Cast first arg to strtol, strchr, and
+	strncmp to "const char *" from "unsigned char *".
+	(remote_wait):  Cast arg to putpkt and strcpy from "unsigned char *"
+	to "char *".
+	(remote_wait):  Change printf format for long arg from "%d" to "%ld".
+	(getpkt):  Remove unused variable "bp".
+	(remote_fetch_word, remote_store_word):  Ifdef out apparently unused
+	functions.
+	* breakpoint.c (watchpoint_check):  Removed unused variables
+	"saved_level" and "saved_frame".
+	* valops.c (value_arg_coerce):  Add other enum TYPE_CODE_* and
+	default cases to switch for completeness.
+	* infrun.c (wait_for_inferior):  Enclose "have_waited" label
+	in #ifdef that matches the one in which it is referenced.
+	* ser-unix.c (hardwire_noflush_set_tty_state):  Enclose otherwise
+	unused variable "state" in #ifdef that matches one in which it is
+	referenced.
+	* eval.c (evaluate_subexp_standard):  Remove unused variable "var".
+	* eval.c (evaluate_subexp_standard):  Remove unused variable
+	"tmp_symbol".
+	* valarith.c (value_subscript):  Remove unused variable
+	"lowerbound", which is redeclared in a nested scope prior to use.
+	* printcmd.c (print_frame_nameless_args):  Use "%ld" to print long
+	arg, not "%d".
+	* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
+	Remove unused static var "check_break_insn_size".
+	* buildsym.c (finish_block):  Add other enum LOC_* and default
+	cases to switch for completeness.
+	ch-lang.c (type_lower_upper):  Removed unused label "retry".
+	Add other enum TYPE_* and default cases to switch for completeness.
+	* f-typeprint.c (f_type_print_args):  Ifdef out unused function
+	that may be used someday when Fortran support is complete.
+	* ch-valprint.c (chill_print_type_scalar):  Add other enum
+	TYPE_* and default cases to switch for completeness.
+	(chill_val_print):  Remove unused local var "high_bound" that
+	is redeclared in a nested scope prior to use.
+	(chill_var_print):  Use "%ld" to print long arg, not "%d".
+	* regex.c (re_compile_fastmap, re_match_2):  Add remaining enum
+	types and default to switches for completeness.
+	* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
+	"trampoline_symbol".
+	(prim_record_minimal_symbol_and_info):  Return NULL rather than
+	trash.
+	* elfread.c (elf_symtab_read):  Don't dereference NULL returns from
+	record_minimal_symbol_and_info.
+	* f-lang.c (saved_function_list_end):  Ifdef out unused variable
+	that may be used someday.
+	* f-valprint.c (f_val_print):  Remove unused local "straddr".
+	
+Mon Jul 17 13:08:00 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* stabsread.h (struct stab_section_list): Define.
+	(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
+	Add textaddr, textsize, and stabs parameters.
+	* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
+	Add text_addr and text_size fields.
+	(DBX_TEXT_SECT): Don't define.
+	(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
+	* coffread.c: Include <ctype.h>.
+	(struct coff_symfile_info): Remove stabsect and stabindexsect
+	fields.  Add textaddr, textsize, and stabsects fields.
+	(coff_locate_sections): Record the address of the .text section,
+	and total the sizes of all sections with names beginning with
+	".text".  Don't bother to record a .stab.index section (COFF
+	doesn't use them).  Make a linked list of all sections with names
+	beginning with ".stab".
+	(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
+	new parameters.
+	* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
+	DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
+	(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
+	DBX_TEXT_SECT.
+	(elfstab_build_psymtabs): Likewise.
+	(stabsect_build_psymtabs): Likewise.
+	(symbuf_sections, symbuf_left, symbuf_read): New static variables.
+	(fill_symbuf): If symbuf_sections is not NULL, read symbols from
+	multiple sections.
+	(coffstab_build_psymtabs): Remove staboffset and stabsize
+	parameters.  Add textaddr, textsize, and stabsects parameters.
+	Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT.  Handle
+	multiple stabs sections.
+	* os9kread.c (os9k_symfile_read):  Use DBX_TEXT_ADDR and
+	DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
+	(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
+	DBX_TEXT_SECT.
+
+	* remote-vx.c (vx_ops, vx_run_ops): Initialize new to_thread_alive
+	field.
+
+Sat Jul 15 01:02:53 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h:  New files
+	for OSF/1-3.x procfs support.
+	* configure.in (alpha-dec-osf):  Use them when configuring
+	for OSF/1-3.x.
+	* configure:  Updated.
+	* target.c:  Include <string.h>.
+
+Fri Jul 14 16:16:56 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in, configure.in: Use one variable, frags, to hold
+	pathnames of makefile fragments.
+	* configure: regenerated.
+
+Fri Jul 14 09:49:47 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* procfs.c (procfs_ops): Fix typo in last change.
+
+Thu Jul 13 13:42:38 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* inftarg.c (child_thread_alive): New function to see if a
+	particular thread is still running.
+	(child_ops): Add child_thread_alive entry.
+	* remote.c (remote_thread_alive): New function to see if a
+	particular thread is still alive.
+	(remote_ops): Add remote_thread_alive.
+	* target.c (dummy_target): Add dummy entry for thread_alive.
+	(cleanup_target): de_fault thread_alive too.
+	(update_current_target): INHERIT thread_alive too.
+	(debug_to_thread_alive): New function.
+	(setup_target_debug): Add debug_to_thread_alive.
+	* target.h (struct target_ops): Add to_thread_alive.
+	(target_thread_alive): Define.
+	* thread.c (info_threads_command): Don't call kill; use
+	target_thread_alive instead.
+	* config/nm-lynx.h (CHILD_THREAD_ALIVE): Define.
+	* gdbserver/low-lynx.c (mythread_alive): New function.
+	(mywait): Don't restart any threads after a new thread notification,
+	let the generic code handle it.
+	* gdbserver/low-sparc.c (mythread_alive): Dummy version.
+	* gdbserver/low-sun3.c (mythread_alive): Likewise.
+	* gdbserver/server.c (main): Handle thread_alive requests.
+	* gdbserver/server.h (mythread_alive): Declare.
+	* corelow.c (core_ops): Add dummy entry for thread_alive.
+	* exec.c (exec_ops): Likewise.
+	* m3-nat.c (m3_ops): Likewise.
+	* monitor.c (monitor_ops): Likewise.
+	* procfs.c (procfs_ops): Likewise.
+	* remote-array.c (array_ops): Likewise.
+	* remote-e7000.c (e7000_ops): Likewise.
+	* remote-es.c (es1800_ops, es1800_child_ops): Likewise.
+	* remote-mips.c (mips_ops): Likewise.
+	* remote-pa.c (remote_hppro_ops): Likewise.
+	* remote-sim.c (gdbsim_ops): Likewise.
+	* sparcl-tdep.c (sparclite_ops): Likewise.
+
+Tue Jul 11 11:15:55 1995  Kung Hsu  <kung@rtl.cygnus.com>
+
+	* solib.c: Add _DYNAMIC__MGC base symbol for Mentor Graphics Inc.
+	* solib.c (match_main): New function for checking name of main.
+	* solib.c (solib_add): Not to add if solib match main.
+
+Fri Jul  7 14:41:56 1995  Kung Hsu  <kung@rtl.cygnus.com>
+
+	* elfread.c (elf_symtab_read): Fix a bug ignoring compiler
+	generated internal labels ($LM...).
+
+Wed Jul  5 11:38:36 1995  Kung Hsu  <kung@rtl.cygnus.com>
+
+	* defs.h: if __GO32__ or WIN32 the directory separating symbol should
+	be '\' not '/'.
+
+	* remote-nindy (nindy_wait): Use infinite timeout reading after
+	esacpe character.
+
+Tue Jul  4 10:30:22 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* infrun.c (wait_for_inferior): When switching from one thread to
+	another, save infrun's state for the old thread and load infrun's
+	previous state for the new thread.
+	* thread.c (struct thread_info): Add new fields for thread specific
+	state saved/restored in infrun.c.
+	(add_thread): Initialize new fields.
+	(load_infrun_state): New function.
+	(save_infrun_state): New function.
+	* thread.h (load_infrun_state): Provide external decl.
+	(save_infrun_state): Likewise.
+
+	* infrun.c (wait_for_inferior): When we hit a breakpoint for the
+	wrong thread, make sure to write the fixed PC value into the thread
+	that stopped.  Restart all threads after single stepping over a
+	breakpoint for a different thread.
+	* breakpoint.c (set_momentary_breakpoint): Make momentary
+	breakpoints thread specific in a multi-threaded program.
+	* lynx-nat.c (child_resume): Add some comments.  Correctly
+	choose between the single and multi-threaded step and continue
+	ptrace calls.
+
+Fri Jun 30 16:15:36 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/h8300/h8300.mt: Renamed from h8300hms.mt.
+	* config/h8500/h8500.mt: Renamed from h8500hms.mt.
+	* config/z8k/z8k.mt: Renamed from z8ksim.mt.
+	* configure, configure.in: Update to reflect renamings.
+
+	* remote-sim.c (sim): New command, passes commands to simulator.
+	(simulator_command): New function.
+	(gdbsim_ops): Clean up.
+	* remote-sim.h (sim_do_command): Declare.
+	* sh-tdep.c (memory_size): Remove command.
+
+	* Makefile.in (SIM, SIM_OBS): New variables.
+	(CLIBS, CDEPS): Add value of SIM.
+	(DEPFILES): Add value of SIM_OBS
+
+	* config/arm/arm.mt, config/h8300/h8300.mt, config/h8500/h8500.mt,
+	config/sh/sh.mt, config/sparc/sp64sim.mt, config/w65/w65.mt,
+	config/z8k/z8k.mt: Remove simulator files from TDEPFILES,
+	define in SIM_OBS and SIM.
+	config/sparc/sp64sim.mt (SIMFILES): Remove.
+
+	* remote-z8k.c: Remove, was superseded by remote-sim.c
+	* Makefile.in, mpw-make.in: Remove references to remote-z8k.c.
+
+Sun Jun 25 15:30:43 1995  Stan Shebs  <shebs@cygnus.com>
+
+	* remote.c (remote_read_bytes, remote_write_bytes): Second arg
+	should be char *, not unsigned char *.
+	* dcache.h (memxferfunc): Ditto.
+	* monitor.c (monitor_write_memory, monitor_read_memory_single):
+	Ditto.
+	(monitor_make_srec): Let compiler figure size of hextab.
+
+Sat Jun 24 19:27:37 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* lynx-nat.c (child_wait): Don't restart new threads and loop
+	to the top of child_wait; let the machine independent code in
+	wait_for_inferior deal with new thread notifications.
+
+Fri Jun 23 11:51:58 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-nindy (nindy_load): Put in target specific load, it's 
+	20 times faster.
+
+Thu Jun 22 20:21:59 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* utils.c (error): Move local `args' outside conditional,
+	move local `string1' inside, declare function as void if
+	non-ANSI compiler, dereference error_hook when calling.
+
+	* mac-xdep.c (stdarg.h): Don't include.
+
+Thu Jun 22 13:12:33 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-nindy.c (nindy_wait): Change timeout in SERIAL_READCHAR.
+
+Wed Jun 21 13:24:41 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppam3-nat.c: Change HP800_THREAD_STATE to TRACE_FLAVOR and
+	HP800_THREAD_STATE_COUNT to TRACE_FLAVOR_SIZE.
+
+Wed Jun 21 05:57:56 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* monitor.c: Turn on caching.
+	(monitor_printf): If a ^C was sent, don't expect to see its
+	echo.
+	(monitor_open): Enable caching.
+	(monitor_resume, monitor_load): Flush cache.
+	(monitor_xfer_memory): Call cache routine.
+	(monitor_dump_regs): New.
+	(monitor_fetch_registers):  If monitor_dump_regs available
+	then use it.
+	(monitor_load): Don't ref exec_bfd if it's NULL.
+	(monitor_load_srec): Use new monitor_make_srec calling convention.
+	(monitor_make_srec): Rewrite to cope with two, three and four byte
+	addresses.
+	* remote-hms.c (hms_cmds): Initialze end-of-command delim.
+	* dcache.h, dcache.h: Rewritten.
+	* remote.c: Reenable caching.
+	(getpkt): Reduce MAX_TRIES to 3.
+	(remote_xfer_memory): Use dcache_xfer_memory.
+	* defs.h (error_hook): New.
+	* top.c (error_hook): New definition.
+	* utils.c (error): Use error_hook if initialized.
+	* sparcl-tdep.c (HAVE_SOCKETS): Don't define if GO32 or WIN32. Use 
+	HAVE_SOCKETS in place of #ifndef GO32.
+
+Tue Jun 20 22:17:44 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (PSW_*): Define processor status word masks.
+	(INSTRUCTION_NULLIFIED): Allow specific targets to override.
+	* config/pa/tm-hppao.h (INSTRUCTION_NULLIFIED): Define to work
+	around losing mach kernel behavior.
+
+Tue Jun 20 12:03:36 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.c (monitor_wait): Don't use the watchdog timeout
+	if its value is 0.
+	* w89k-rom.c (w89k_open): Define to be static.
+
+
+Sat Jun 17 10:17:16 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (som_solib_add): Validate regexp argument.
+	Don't assume the first entry on dld's library list is the main
+	program.  Don't load the same library more than once and don't
+	consider the main program a shared library.
+	(som_solib_sharedlibrary_command): New function
+	(_initialize_som_solib): Add "sharedlibrary" command.
+
+Thu Jun 15 14:54:58 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* array-rom.c: Remove, no longer used.
+
+	* remote-hms.c (hms_open): Make static.
+
+	* mpw-config.in (MacSerial.h): Copy from version in {CIncludes},
+	not {MPW}Interfaces:CIncludes.
+	* ser-mac.c (mac_baud_rate_table): Fix value for 38400 baud.
+
+Wed Jun 14 14:27:07 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.y:  Remove lots of unsupported productions and names.
+	Add support for IF-expressions, ORIF, ANDIF, NUM, and ADDR.
+
+Tue Jun 13 21:40:11 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* parser-defs.h (enum precedence):  Added PREC_BUILTIN_FUNCTION.
+	* expression.h (enum exp_opcode):  Added UNOP_LOWER, UNOP_UPPER,
+	UNUP_LENGTH.
+	* expprint.c (dump_expression):  Handle the new exp_opcodes.
+	(print_subexp):  Handle PREC_BUILTIN_FUNCTION.
+	(print_simple_m2_func):  Removed.
+	(print_subexp):  Remove support for Modula2 builtin functions.
+	* m2-lang.c (m2_op_print_tab):  Add support for builtin functions.
+	* ch-exp.y:  Parse LOWER, UPPER, and LENGTH builtins.
+	(write_lower_upper_value):  Convenience function for LOWER and UPPER.
+	(upper_lower_argument, length_argument):  Removed non-terminals.
+	* ch-lang.c (chill_op_print_tab):  Entries for UPPER, LOWER, LENGTH.
+	(type_lower_upper):  New function.  Calculate LOWER/UPPER of type.
+	(value_chill_length):  New function.  Calcalate LENGTH of ARRAY/STRING.
+	(evaluate_subexp_chill):  Handle UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH.
+
+Mon Jun 12 12:48:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Windows support bits from Steve Chamberlain <sac@slash.cygnus.com>.
+	* defs.h: Don't declare strchr and friends if WIN32.
+	(DIRNAME_SEPARATOR): Move here from source.c.
+	(SLASH_P, SLASH_CHAR, SLASH_STRING, ROOTED_P): New macros,
+	symbolic definitions for filename bits.
+	* top.c (cd_command): Use these.
+	* source.c (mod_path, openp): Ditto.
+	* terminal.h: Disable termio/sgtty definitions if WIN32.
+	* findvar.c (registers_changed): Call registers_changed_hook
+	if it is defined.
+
+Mon Jun 12 12:22:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (distclean, realclean): Remove config.cache and
+	  config.log.
+
+Mon Jun 12 00:21:59 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c: Include gdb-stabs.h.
+	(som_solib_section_offsets): Use SECT_OFF_XXX rather than 0, 1,
+	etc.  Initialize offsets for RODATA & BSS too.
+
+Sat Jun 10 17:59:11 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (frame_chain): Try to compensate for incomplete
+	register information in core files when backtracing.
+
+Fri Jun  9 14:51:38 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-nrom.c:  Remove everything but download code.  More
+	cleanups.
+
+Thu Jun  8 15:06:00 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h maint.c monitor.c remote-mips.c remote.c:  Add support
+	for `watchdog' variable.  This allows the user to put an upper
+	limit on the amount of time that GDB will wait for the target to
+	return from a step or continue operation.  This will primarily be
+	used for the testsuite, where it is difficult to come up with a
+	reasonable timeout for things like function calls, which can take
+	as long as three minutes under some circumstances.  If the
+	watchdog timer expires, GDB will generate an error that looks like
+	`Watchdog has expired.', and will detach from the target.
+
+	* remote-mips.c (mips_open):  Setup initial frame from target.
+	Print it out so that user is told where the program is stopped
+	when they attach.
+
+	* remote-nrom.c:  Loads of cleanups.  Use serial code to open
+	network connections.  Use expect() to wait for response to
+	download command.
+
+	* ser-tcp.c (tcp_open):  Retry connection if we get ECONNREFUSED.
+
+	* serial.c serial.h (serial_open serial_fdopen serial_close):
+	Allow users to open the same device multiple times.  They all get
+	to share the same serial_t.  This is about the only way to have
+	multiple active targets use the same device (for download and
+	debug).
+
+	* sparcl-tdep.c:  Keep #include <unistd.h> away from GO32.
+
+	* target.c:  Add `targetdebug' variable.  If this is non-zero,
+	then a special target is put at the top of the target stack which
+	will cause all calls through the target vector to have their args
+	and results printed out.
+
+Wed Jun  7 17:40:37 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.y: Handle <primitive_value> "->" <modename>.
+
+Wed Jun  7 17:46:33 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* mem-break.c (LITTLE_BREAKPOINT): If BREAKPOINT and
+	{LITTLE,BIG}_BREAKPOINT are all defined, don't redefine.
+	(BIG_BREAKPOINT): Ditto.
+
+	* config/rs6000/tm-rs6000.h (BREAKPOINT): Define as either
+	BIG_BREAKPOINT or LITTLE_BREAKPOINT depending on the target byte
+	order.
+
+Wed Jun  7 12:41:42 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (som_solib_section_offsets): Handle relative pathnames.
+
+	* hppa-tdep.c (frame_saved_pc): Handle backtracing through signal
+	handler in dynamically linked executables.
+
+Tue Jun  6 10:44:25 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	From Andrew Cagney <cagney@highland.com.au>
+	* rs6000-tdep.c (single_step): Handle both little and big endian
+	breakpoints.
+	(gdb_print_insn_powerpc): Deal with disassembling both little and
+	big endian PowerPC systems.
+	(_initialize_rs6000_tdep): Use gdb_print_insn_powerpc to handle
+	disassembly, rather that assuming big endian order.
+
+	* config/rs6000/tm-rs6000.h (BREAKPOINT): Delete.
+	(BIG_BREAKPOINT): Define, big endian breakpoint instruction.
+	(LITTLE_BREAKPOINT): Define, little endian breakpoint instruction.
+
+Sat Jun  3 01:54:56 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Add note about Unixware 2.x.
+
+	* dbxread.c (process_one_symbol):  Check for exact symbol name
+	match when fixing up N_GSYM and N_STSYM symbols from Sun acc.
+
+	* valprint.c (value_print_array_elements):  Use
+	fprintf_filtered to put out `<repeats %u times>',
+	from schwab@issan.informatik.uni-dortmund.de (Andreas Schwab).
+
+	* value.h (struct value):  Change `repetitions' field from
+	`short' to `int' type.
+
+Fri Jun  2 11:17:23 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* arc-tdep.c (arc_bfd_mach_type): New static global.
+	(codestream_fill): Handle byte order differences.
+	(setup_prologue_scan): Don't read stdarg function's "sub sp,sp,N".
+	(arc_get_frame_setup): Read it here.
+	(arc_frame_saved_pc): And here.
+	(arc_print_insn): New function.
+	(arc_set_cpu_type): Set arc_bfd_mach_type.  Don't set tm_print_insn.
+	(_initialize_arc_tdep): Set tm_print_insn to arc_print_insn.
+
+Wed May 31 12:04:01 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlm/{configure.in, Makefile.in}: Converted to use autoconf.
+	* nlm/configure: New file, generated with autoconf 2.3.
+
+	* nlm/configure.in: Use sed instead of awk to get the value of
+	  cpufile.  Awk is not a utility required by the GNU coding
+	  standards.  This change also fixes the rigid whitespace
+	  requirements that were required for awk.
+
+	* sparclite/aload.c: Use a file descriptor instead of a stdio
+	  stream for i/o with target board.
+	  Use #error if HAVE_TERMIOS is not defined.
+
+	* sparclite/{Makefile.in, configure.in}: Converted to use
+	  autoconf.
+	* sparclite/configure: New file, generated with autoconf 2.3.
+
+Sun May 28 23:10:07 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* defs.h: Include either varargs.h or stdarg.h (for va_list).
+	Fix stupid thinko in last change ("..." -> "va_list").
+
+	* defs.h (vprintf_filtered declaration): Add PARAMS prototype;
+	gcc-2.5 chokes on format attributes for unprototyped functions.
+	(vfprintf_filtered declaration): Likewise.
+	(vprintf_unfiltered declaration): Likewise.
+	(vfprintf_unfiltered). Likewise.
+
+Sat May 27 23:54:17 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* configure.in: Use sed instead of awk to get the values of
+	  hostfile, targetfile and nativefile.  Awk is not a utility
+	  required by the GNU coding standards.  This change also 
+	  fixes the rigid whitespace requirements that were required
+	  for awk.
+	* configure: regenerated.
+
+Sat May 27 16:24:04 1995  Angela Marie Thomas  <angela@cirdan.cygnus.com>
+
+        * sparclite/{Makefile,configure}.in: Add hooks for building with
+        -lsocket & -lnsl for solaris2.  Don't build aload/eload for DOS.
+
+Thu May 25 12:46:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/remote-utils.c (prepare_resume_reply): Add FIXME
+	comment regarding signal numbering.
+
+Wed May 24 15:49:47 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* arm-tdep.c (_initialize_arm_tdep): Use print_insn_little_arm
+	now.
+
+	* arm-tdep.c (convert_from_extended, convert_to_extended):
+	New.
+	* coffread.c (enter_linenos): Return if linetab 0.
+	* config/arm/arm.mt (TDEPFILES): Add simulator support.
+	* config/arm/tm-arm.h (FRAME_FIND_SAVED_REGS): Fix prototypes.
+
+Mon May 22 19:37:21 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* config/idt.mt: replace monitor and array-rom with the new
+	remote-array.
+
+Mon May 22 15:38:25 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* remote-nindy.c:  Install Kung patch for PR 6820.  I have no idea
+	what this does...
+
+	* breakpoint.c:  Move defaults of watchpoint related macros into
+	target.h.
+	* target.h:  Macros from breakpoint.c.  Conditionalize based on
+	TARGET_HAS_HARDWARE_WATCHPOINTS.
+	* i386v-nat.c procfs.c:  Use TARGET_HAS_HARDWARE_WATCHPOINTS
+	instead of TARGET_CAN_USE_HARDWARE_WATCHPOINT to enable watchpoint
+	code.
+	* config/i386/nm-linux.h, config/mips/nm-irix4.h,
+	config/pa/nm-hppab.h, config/sparc/tm-sparclite.h:  #define
+	TARGET_HAS_HARDWARE_WATCHPOINTS to enable watchpoint code.
+
+Mon May 22 06:47:30 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c, target.h: Move defaults of watchpoint related
+	macros back to breakpoint.c.  Required to get GDB compiling
+	on Solaris again.
+
+Fri May 19 14:49:37 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* defs.h (ATTR_FORMAT): New macro, expands to gcc's format
+	  attribute when compiled by gcc.  
+	* defs.h, language.h, monitor.h: Changed many function
+	  declarations to use ATTR_FORMAT.
+
+	* breakpoint.c (delete_command); source.c (directory_command);
+	  top.c (define_command): Changed call to query() that had too
+	  many arguments.
+	* printcmd.c (address_info): Changed call to printf_filtered()
+	  that had too many arguments.
+
+Fri May 19 09:52:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Move assignments to stop_signal
+	and stop_pc, and STOPPED_BY_WATCHPOINT code, back where they
+	were--after the switch statement on w.kind.  You can't read the
+	registers of an inferior which has exited.  Use a goto in the
+	STOPPED_BY_WATCHPOINT code.
+	* infrun.c (wait_for_inferior): Reinstate
+	HAVE_STEPPABLE_WATCHPOINT and HAVE_CONTINUABLE_WATCHPOINT code.
+
+Fri May 19 06:15:40 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* utils.c, complaints.c, language.c, monitor.c, remote-array.c,
+	remote-mips.c, remote-os9k.c, remote-st.c: Conditionalize use of
+	stdarg rather than varargs on ANSI_PROTOTYPES not __STDC__; it
+	must match the definition of PARAMS.
+
+Thu May 18 15:58:46 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* utils.c (fprintf_filtered, fprintf_unfiltered, fprintfi_filtered,
+	  printf_filtered, printf_unfiltered, printfi_filtered, query, warning,
+	  error, fatal, fatal_dump_core): Use stdarg.h macros when compiling 
+	  with an ANSI compiler.
+	* complaints.c (complain): Likewise.
+	* language.c (type_error, range_error): Likewise.
+	* monitor.c (monitor_printf, monitor_printf_noecho): Likewise.
+	* remote-array.c (printf_monitor, debuglogs): Likewise.
+	* remote-mips.c (mips_error): Likewise.
+	* remote-os9k.c (printf_monitor): Likewise.
+	* remote-st.c (printf_stdebug): Likewise.
+
+	* defs.h, complaints.h, language.h, monitor.h: Add prototypes to
+	  match above changes.
+
+	* printcmd.c: Remove uneeded #include <varargs.h>.
+	* remote-e7000.c: Likewise.
+
+	* f-typeprint.c (f_type_print_base): Fix typo found by above
+	  changes.
+
+Wed May 17 11:21:32 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* Makefile.in (xcoffread.o): Depend on partial-stab.h.
+
+	* xcoffsolib.c (sharedlibrary_command): New command.
+	* xcoffsolib.c (solib_info): Call xcoff_relocate_symtab.
+	* xcoffsolib.c: Miscellaneous cleanups.
+
+	* partial-stab.h: Ignore symbol descriptor '-' (for local
+	variables with negative type numbers) without complaint.
+
+	* rs6000-nat.c (vmap_ldinfo): Use bfd_stat rather than our own
+	local emulation thereof.  Remove unused variable ostart.
+
+Wed May 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (config.status): changed target so that
+	  config.status --recheck is executed if configure script changes.
+
+	* monitor.c (monitor_printf): Changed format specification in
+	  error message to work with pre-ansi compilers.
+	  (monitor_load_srec): reduced length of s-records from 128 to 32
+	  bytes so download is more reliable with the rom68k monitor.
+
+	* rom68k-rom.c: Added trailing space to prompt string.
+
+	* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
+	* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
+	  Removed.
+	* defs.h, config/{xm-lynx.h, xm-nbsd.h},
+	  config/i386/{xm-i386bsd.h, xm-linux.h},
+	  config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
+	  config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
+	  (PSIGNAL_IN_SIGNAL_H): Removed.
+
+Tue May 16 13:16:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (Makefile): Added config.status to dependency list.
+
+	* configure.in: Added INIT-CMDS argument to AC_OUTPUT which sets
+	  gdb_host_cpu, gdb_target_cpu and nativefile.
+	* configure: regenerated.
+
+Mon May 15 23:50:51 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  Do not relocate stBlock/scText
+	symbols, their value is the displacement from the procedure address.
+	* top.c (init_main):  Add missing newlines to help strings for
+	`if' and `while' commands, fix help string for `show commands'.
+
+Mon May 15 18:37:56 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* breakpoint.c:  Move defaults of watchpoint related macros into
+	target.h.  Use BP_TEMPFLAG and BP_HARDWAREFLAG instead of
+	constants.
+	* infrun.c (wait_for_inferior):  Enhance comment near
+	STOPPED_BY_WATCHPOINT.
+	* target.h:  Macros from breakpoint.c.
+
+Mon May 15 17:11:38 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/i386/{i386sol2.mh, i386v4.mh, ncr3000.mh},
+	  config/m68k/m68kv4.mh, config/mips/{irix4.mh, irix5.mh,
+	  mipsv4.mh}, config/sparc/sun4so2.mh (INSTALL): Removed, figured
+	  out by autoconf.
+	* config/apollo68v.mh (RANLIB): Removed, figured out by autoconf.
+
+	* Makefile.in, configure.in: Converted to use autoconf
+	* aclocal.m4: New file, local autoconf macro definitions.
+	* configure: New file, generated with autoconf 2.3.
+
+Mon May 15 14:46:41 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (remote_kill): Add prototype.
+	* cpu32bug-rom.c (cpu32bug_open): Properly define as static.
+	* config/h8300/h8300hms.mt (TDEPFILES): Add monitor.o.
+
+Mon May 15 12:12:34 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* sparclite/salib.c (win_ovf win_unf):  Make window size constant
+	into a variable (__WINSIZE) so that it can be controlled via the
+	.h file.
+	* sparclite/sparclite.h:  Add SL933 #ifdef to set __WINSIZE to 6
+	for the 933 board.
+
+	* infrun.c:  Add #ifdef HP_OS_BUG to all references to
+	trap_expected_after_continue.
+	* (wait_for_inferior):  Fix for remote watchpoints.  Don't try to
+	insert breakpoints while target is running (this only works on
+	*some* native targets).  This may also speed up native watchpoints
+	considerably.
+
+Sat May 13 13:55:04 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
+	mdebugread.c (struct symloc), hpread.c (struct symloc),
+	xcoffread.c (struct symloc): Fix inaccurate comment introduced
+	20 Apr 1995.
+
+Sat May 13 13:34:18 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* rs6000-tdep.c (find_toc_address): Revise comment.
+	* symfile.c, symfile.h (init_psymbol_list): New function;
+	consolidate duplicated copies from os9kread.c, dbxread.c
+	and dwarfread.c.
+	* defs.h: Declare info_verbose.
+	* xcoffread.c: Extensive changes to support psymtabs.
+
+Fri May 12 13:48:41 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* cpu32bug-rom.c remote-est.c rom68k-rom.c:  Update line_term element.
+
+Fri May 12 06:39:30 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* partial-stab.h: Expand comments.
+
+Thu May 11 19:01:37 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Support debugging using native MACH primitives on hppa*-*-osf*.
+	* configure.in: hppa*-*-osf* != hppa*-*-bsd* anymore.
+	* config/pa/hppaosf.mh: New file.
+	* config/pa/nm-hppao.h: Likewise.
+	* hppam3-nat.c: Likewise.
+	* config/pa/tm-hppao.h (PSW_SS): Define for single-stepping.
+	(MACHINE_CPROC_*_OFFSET): Define.
+	(TRACE_*): Define.
+	(START_INFERIOR_TRAPS_EXPECTED): Delete definition.
+
+Wed May 10 18:59:26 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* hppa-tdep.c (read_unwind_info):  Cosmetic cleanup.
+	* (unwind_command):  Clean it up and make it print things out
+	nicer.
+	* monitor.c:  Add ^C handling capability (mostly ripped off from
+	remote.c).
+	* (monitor_printf):  Make it check the command echo.
+	* (monitor_printf_noecho):  Similar to above, but doesn't check
+	for echo.
+	* (monitor_stop):  No longer waits for prompt.  That is the job of
+	the caller.  This makes things work much better for monitor_wait,
+	which waits for the prompt itself.
+	* (monitor_open):  Deal with new monitor_stop semantics.  Also,
+	flush input after sending init strings to get rid of junk that may
+	be output.  Also, don't always send \r to remote.  Use
+	monitor_ops->line_term cuz proper character isn't always \r.
+	* (monitor_fetch_register):  Switch to completely different
+	algorithm to deal with lame-ass monitors which put spaces in the
+	middle of numbers, and prompt with a space!!!!!
+	* (monitor_read_memory_single):  New routine to be used with
+	monitors that can only return one byte/short/long at a time.  This
+	is selected via MO_GETMEM_READ_SINGLE.
+	* (monitor_load_srec):  Use monitor_printf_noecho for sending S
+	records.  Most targets don't echo them.
+	* (monitor.h):  Get rid of cmd_delim.  Add line_delim.
+	* op50n-rom.c (op50n_cmds):  Fill it up.  Make it work.
+	* w89k-rom.c:  Change all eols from \r to \n.  Change load_resp to
+	^Q to prevent error message.
+	* config/pa/tm-hppa.h (CALL_DUMMY (for hppro)):   Add special
+	instruction sequence at end to make restore_pc_queue happy.
+
+Wed May 10 15:59:00 1995  Torbjorn Granlund  <tege@adder.cygnus.com>
+
+	* remote-est.c (est_open): Make static to match prototype.
+
+Tue May  9 16:58:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure.in: Add little endian PowerPC support.
+	* config/powerpc/ppcle-eabi.mt: New file for little endian PowerPC
+	support.
+	* config/powerpc/tm-ppcle-eabi.h: ditto.
+
+Mon May  8 12:11:38 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlm/configure.in (gdb_host, gdb_host_cpu, gdb_target): Removed.
+	  These variables not used.
+
+	* config/m68k/monitor.mt (TDEPFILES): Added cpu32bug-rom.o.
+
+Wed May  3 17:54:47 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.c (monitor_command): Don't use PROMPT until monitor
+	target is known to be open.
+	(monitor_make_srec): Don't define size of hextab.
+
+Tue May  2 18:32:24 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.in (--enable-netrom): New configuration option.
+	* Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append
+	value of NETROM_OBS.
+	(NETROM_OBS): New variable.
+	* remote-nrom.c: New file, NetROM target support.
+	* config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use
+	REMOTE_OBS instead of REMOTE_O.
+	* config/arc/arc.mt: Ditto.
+
+Fri Apr 28 23:30:00 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* array-rom.c (_initialize_array array_open):  Move baud_rate
+	initialization from _initxxx to array_open to fix bug with
+	overriding -b command line option.
+
+Thu Apr 27 20:29:34 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* Makefile.in (RUNTEST): Fix reference of `srcdir'.
+
+Wed Apr 26 19:01:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
+ 
+ 	* remote-hms.c: Rewrite to use new monitor conventions.
+
+Tue Apr 25 11:27:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c: Add comment explaining lowest_text_address.
+	Add comment regarding stringtab_global and psymtabs.
+
+Sat Apr 22 01:26:29 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (EXTRACT_STRUCT_VALUE_ADDRESS): Fix.
+
+	* config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Rewrite to correctly
+	handle "short", "int" and small structures returned in registers. 
+
+Fri Apr 21 12:57:53 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* minsyms.c: add new function lookup_minimal_symbol_text, to look
+	for text symbol only.
+	* breakpoint.c (create_longjmp_breakpoint): call
+	lookup_minimal_symbol_text instead of lookup_minimal_symbol.
+	* symtab.h: add lookup_minimal_symbol_text prototype.
+
+Fri Apr 21 12:03:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* sh-tdep.c (sh-opc.h): Don't include.
+	(gdbcore.h): Include.
+	(frame_find_saved_regs): Remove unused local.
+
+Thu Apr 20 10:12:21 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dwarfread.c (struct dwfinfo), dbxread.c (struct symloc),
+	mdebugread.c (struct symloc), hpread.c (struct symloc): Clean
+	up comments.
+
+Wed Apr 19 16:58:11 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* hppa-tdep.c (deposit_17):  New routine to deposit 17 bit
+	constants into PA instructions.
+	* Put #ifdefs around all signal handling code.  Not generally
+	needed for embedded boards.
+	* (hppa_fix_call_dummy):  Parameterize offsets into call dummy to
+	allow different dummys to be used by this code.  Use
+	INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
+	Conditionalize setup of _sr4export fixup.  Improve comments.
+	* config/pa/tm-hppa.h:  Define INSTRUCTION_SIZE.  Use a different
+	call dummy if PA_LEVEL_0 is defined.  Better comments for call
+	dummys.  Define offsets for LDIL/LDO instructions which load
+	function addresses.
+	* config/pa/tm-pro.h:  Get rid of signal handling stuff.  Define
+	PA_LEVEL_0 to disable mucking with space regs and such.
+
+Mon Apr 17 15:37:08 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* cpu32bug-rom.c monitor.h op50-rom.c remote-est.c rom68k-rom.c
+	w89k-rom.c:  Remove loadtypes, loadprotos and baudrates.
+	* op50-rom.c:  Fix copyrights and add load routine to op50n_cmds.
+	* rom68k-rom.c (_initialize_rom68k):  Don't set baud rate.
+	* w89k-rom.c:  Fix copyrights.
+
+Sun Apr 16 14:00:55 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* monitor.c:  Move all xmodem stuff into xmodem.[ch].  Remove
+	unnecessary remoteloadprotocol and remoteloadtype support.
+	* (expect expect_prompt):  Change names to monitor_expect and
+	monitor_expect_prompt.  Make them global.
+	* (printf_monitor):  Change name to monitor_printf.  Make global.
+	* (monitor_read_memory):  Flush command echo to avoid parsing
+	ambiguity with CPU32Bug monitor.
+	* (monitor_load):  Remove remoteloadprotocol and remoteloadtype
+	support.  Call target_ops->load_routine, default to
+	monitor_load_srec.
+	* (monitor_load_srec):  Remove everything but S-record support.
+	* monitor.h (monitor_ops):  Add load_routine to provide monitor
+	specific download capability.
+	* remote-est.c:  Clean up copyrights and comments.
+	* w89k-rom.c:  Use new xmodem support.
+	* xmodem.c xmodem.h:  New files to support xmodem downloads.
+	* rom68k-rom.c remote-est.c:  Fix copyrights, add load_routine
+	entry to monitor_ops.
+	* cpu32bug-rom.c:  New file to support Moto BCC debuggers.
+	* config/m68k/est.mt (TDEPFILES):  Add cpu32bug.o.
+	* config/pa/hppapro.mt (TDEPFILES):  Add xmodem.o.
+
+Sat Apr 15 18:00:15 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* rem-multi.shar: Removed; superceded by gdbserver.
+
+Fri Apr 14 12:10:24 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* xcoffread.c (xcoff_sym_fns): Revise comment about merging this
+	with coffread.c.
+
+	* breakpoint.c (fixup_breakpoints): Removed.
+	* rs6000-nat.c (vmap_symtab): Don't call fixup_breakpoints.
+	(vmap_ldinfo, xcoff_relocate_core): Call breakpoint_re_set.
+
+	* coffread.c (coff_symfile_offsets): Allocate SECT_OFF_MAX
+	sections, not just SECT_OFF_MAX-1.
+
+	* rs6000-nat.c (vmap_symtab), xcoffread.c: Re-do section offsets
+	to be indexed by SECT_OFF_* instead of xcoff section numbers.
+	* objfiles.c, remote.c: Remove comments regarding SECT_OFF_*.
+	* symtab.h: Revise comment about block_line_section.
+	* rs6000-nat.c (vmap_symtab): Don't relocate objfile->sections.
+
+Sat Apr 15 14:15:14 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.in (init.c): Don't try to do symbolic {o} in sed
+	command, not allowed by some version of MPW Make.
+	* ser-mac.c (mac-setbaudrate): Make it actually set baud rates.
+
+Sat Apr 15 14:05:09 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* alpha-tdep.c (alpha_push_arguments): Fix typo (TYPE_VALUE ->
+	VALUE_TYPE).  Do the cast for TYPE_CODE_BOOL, TYPE_CODE_CHAR,
+	TYPE_CODE_ENUM, and TYPE_CODE_RANGE as well as TYPE_CODE_INT.
+
+Sat Apr 15 14:04:32 1995  Per Bothner  <bothner@cygnus.com>
+
+	* alpha-tdep.c (alpha_push_arguments): Only cast to long for
+	TYPE_CODE_INT.
+
+
+Thu Apr 13 16:17:04 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* remote-array.c: New file for Array Tech LSI33k based controller
+	board.
+
+Thu Apr 13 12:23:31 1995  Kung Hsu  <kung@rtl.cygnus.com>
+
+	* a29k-tdep.c (get_longjmp_target): Replace SWAP_TARGET_AND_HOST with
+	extract_address.
+	* remote-vxsparc.c: New file, preliminary check in, this configuration
+	not supported yet. 
+	* remote-vxmips.c: ditto.
+
+Thu Apr 13 12:10:14 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* rs6000-tdep.c (xcoff_add_toc_to_loadinfo): Don't use a prototype
+	to declare the function.
+
+Wed Apr 12 16:40:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.h (init_monitor_ops): Declare.
+	* rom68k-rom.c: Clarify some comments.
+	(rom68k_open): Define as static, to match decl.
+
+Wed Apr 12 16:36:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.gdb: New file.
+	* .gdbinit: Move list-objfiles to gdb.gdb.
+
+	* values.c (set_internalvar): Set modifiable flag of newval.
+
+Wed Apr 12 14:34:31 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* xcoffread.c: Call complain() rather than error() or printing a
+	warning.
+
+Wed Apr 12 08:15:27 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* arc-tdep.c: #include "gdbcmd.h".
+	(codestream_seek): Pass CORE_ADDR.
+	(arc_cpu_type, tmp_arc_cpu_type, arc_cpu_type_table): New globals.
+	(debug_pipeline_p): Likewise.
+	(X_...): Instruction field access macros.
+	(BUILD_INSN): Define.
+	(codestream_tell): Allow for stream elements > 1 byte.
+	(codestream_fill): Likewise.
+	(setup_prologue_scan): New function.
+	(arc_get_frame_setup): Call it.  Update to current spec
+	regarding prologues.  Use BUILD_INSN.
+	(skip_prologue): New argument `frameless_p'.  Use BUILD_INSN.
+	(arc_frame_saved_pc): New function.
+	(frame_find_saved_regs): Use BUILD_INSN.
+	(get_insn_type, single_step): New functions.
+	(one_stepped): New global.
+	(arc_set_cpu_type_command, arc_show_cpu_type_command): New functions.
+	(arc_set_cpu_type): New function.
+	(_initialize_arc_tdep): Define new `set' commands `cpu',
+	`displaypipeline', and `debugpipeline'.
+	* arc/tm-arc.h (TARGET_BYTE_ORDER): Delete.
+	(TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(DEFAULT_ARC_CPU_TYPE): Define.
+	(SKIP_PROLOGUE_FRAMELESS_P): Define.
+	(BREAKPOINT): Delete.
+	(BIG_BREAKPOINT, LITTLE_BREAKPOINT): Define.
+	(DECR_PC_AFTER_BREAK): Change to 8.
+	(NO_SINGLE_STEP): Define.
+	(ARC_PC_TO_REAL_ADDRESS): Define.
+	(SAVED_PC_AFTER_CALL): Use it.
+	(NUM_REGS, REGISTER_BYTES): Fix.
+	(FRAME_SAVED_PC): Call arc_frame_saved_pc.
+	(FRAME_LOCALS_ADDRESS): Fix.
+
+Tue Apr 11 16:42:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* top.c, utils.c, defs.h: Remove error_hook.  It is currently
+	unused and would need to hook into error_begin()/return_to_top_level(),
+	instead of error(), if it were to be used.
+
+Tue Apr 11 13:46:25 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* utils.c, defs.h (warning_begin): Renamed from warning_setup, for
+	consistency with error_begin.  Also print warning_pre_print.
+	Document it better.
+	* utils.c (warning): Use it.
+	* utils.c (error_begin): Doc fix.
+	* rs6000-nat.c (vmap_ldinfo): If we don't find ldinfo for the
+	symfile_objfile, nuke it.
+
+Tue Apr 11 09:35:20 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_address_numeric): Pass use_local to
+	print_longest, rather than always passing 1.
+
+	* nlm/Makefile.in: Remove comments discussing munch.
+
+
+Mon Apr 10 18:31:57 1995  Stan Shebs  <shebs@andros.cygnus.com>
+	
+	Merge in support for Mac MPW as a host.
+	(Old change descriptions retained for informational value.)
+
+	* mpw-config.in (i386-unknown-go32): Change from aout.
+	(sh-hitachi-hms): New target.
+	* mpw-make.in (BISON): Use byacc instead of bison.
+	(VERSION): Bump to 4.14.1.
+	(*-pinsn.*): Remove mentions everywhere.
+	(all): Don't build MacGDB.
+	(gdb, SiowGDB): Depend on Version.r.
+	(Version.r): Generate from version info.
+	* main.c (main): Pass program name to START_PROGRESS, END_PROGRESS.
+	(main) [MPW]: Remove debugging hook.
+	* mac-xdep.c (debug_openp): New flag.
+	(mac_init): Set flag if env variable defined.
+	* ser-mac.c (mac_open): Clarify error message.
+	(mac_readchar): Call PROGRESS while looping.
+	(mac_write): Call sleep instead of sec_sleep.
+	(sec_sleep): Remove.
+	* source.c (openp) [MPW]: Only print debugging info if debugging.
+	* utils.c (query) [MPW]: Clarify that behavior is a bug.
+
+	* mpw-make.in (init.c): Use open-brace instead of mpw-open-brace.
+
+	* main.c, source.c: Remove hacks that replace long strings
+	with shorter ones, now solved portably.
+
+	* config/m68k/xm-mpw.h (spin.h): Include.
+	(ALMOST_STDC): Only define if MPW_C.
+	* config/m68k/tm-mac.h: New file, Mac target definitions.
+
+	* mpw-config.in (m68k-apple-macos, ppc-apple-macos,
+        i386-unknown-aout): New targets.
+	(mk.tmp): Add *DEPFILES definitions.
+	* mpw-make.in: Remove gC rules, clean up definitions for other
+        include files, bump version, fix bogus \ that should be \Option-d.
+	(init.c): Build correctly.
+
+	* mpw-make.in (HFILES_NO_SRCDIR): Add somsolib.h
+	(ALLDEPFILES): Add somsolib.c.
+	(somsolib.o): Add some dependencies.
+
+	* mpw-config.in: Use nm-empty.h if host is not target.
+	(xdepfiles): Add mac-xdep.c.o.
+	(xm_file): Remove.
+	* mpw-make.in: Add Fortran files.
+	(XDEPFILES): Remove.
+
+	* mpw-config.in (MacSerial.h): Duplicate from standard Serial.h.
+	* ser-mac.c (MacSerial.h): Include instead of Serial.h.
+
+	* mpw-make.in: Use {s} instead of {srcdir} everywhere.
+	(bindir, libdir): Remove extra colon.
+	(source.c): Compile with C instead of gC.
+	(c-exp.tab.c, ch-exp.tab.c, m2-exp.tab.c): Add {o}.
+	(install-only): Don't install MacGDB.
+	* source.c (openp) [MPW]: Add a debugging display.
+	(open_source_file) [MPW]: Use MPW basename finders.
+	[MPW_C]: Briefer versions of help for line and list commands.
+
+	* mpw-make.in: Change references from paread.c to somread.c
+
+	* mpw-make.in (VERSION): Update to 4.12.3.
+	(SiowGDB): New target, GDB using SIOW library.
+	(init-new.c): New target, attempt to generate init.c from sources.
+	(main.c.o, top.c.o): Put each in its own segment.
+	* main.c (main) [MPW]: Always call mac_init.
+	* utils.c (query) [MPW]: Always return "yes" if in MacGDB, output
+	an extra newline otherwise.
+	* mac-xdep.c: More comments in various places, remove junk.
+	(mac_init): Add tests for MPW and SIOW.
+	(use_wne, has_color_qd): Renamed.
+	(use_color_qd): New variable.
+	(grow_window): Only do console resizing to console window,
+	call resize_console_window.
+	(zoom_window): Call resize_console_window.
+	(resize_console_window, scroll_text): New functions.
+	(adjust_console_sizes): Always align viewrect to even multiples of
+	text lines.
+	(adjust_console_text): Always scroll by whole lines.
+	(hacked_vfprintf, hacked_puts, hacked_fputc, hacked_putc): Force a
+	recalculation of scroll positions if a newline was output.
+	(hacked_fflush): Similarly, for flushing.
+	(hacked_fgetc): New function, aborts if called in MacGDB.
+	* ser-mac.c (mac_readchar): Rename starttime to start_time,
+	remove debugging printf.
+	(mac_write): Sleep on first 4 writes.
+	(sec_sleep): New function, works like standard sleep.
+	* macgdb.r: Adjust positioning and contents of About box.
+	Set minimum size to 2000K, preferred size to 5000K.
+	* config/m68k/xm-mpw.h (fgetc): Define as a macro.
+
+	* mpw-make.in (.c.o, .gc.o): Prefix segment names with gdb_.
+	(top.c.o, annotate.c.o): Add build rules.
+	* macgdb.r (SysTypes.r): Include.
+	('vers'): New resource, version info.
+	(mFile, mEdit, mDebug): Enable all menu items.
+	(mDebug): Add key equivalents for continue, step, next.
+	(wConsole): Add zoom and close boxes to window.
+	* mac-xdep.c (new_console_window): New function, code taken from
+	mac_init.
+	(mac_command_loop): Use GetCaretTime for wait interval, call
+	do_idle on null events.
+	(do_idle): New function.
+	(zoom_window): Implement zooming.
+	(v_scroll_proc): New function, handles vertical scrolling.
+	(activate_window): Do activation of console window.
+	(do_menu_command): Implement items of file, edit, and debug menus.
+	(do_keyboard_command): Fix command extraction.
+	(adjust_console_sizes, adjust_console_text): New functions.
+	(hacked_fprintf, hacked_vfprintf, hacked_fputs, hacked_fputc,
+	hacked_putc): Don't call draw_console.
+	* ser-mac.c (mac_open): Add an error message for invalid ports.
+	(first_mac_write): New global.
+	(mac_write): Use first_mac_write to sleep on first several writes.
+
+	* mpw-make.in (INCLUDE_CFLAGS): Add readline source dir.
+	(READLINE_CFLAGS, READLINE_SRC, READLINE_DIR): Uncomment.
+	(TSOBS): Don't compile inflow.c.
+	(all, install): Add MacGDB.
+	* main.c (main): Do Mac-specific init and command loop if a
+	standalone app, skip full option help message if compiling
+	with MPW C.
+	(gdb_readline): If MPW, add a newline after the (gdb) prompt.
+	* utils.c (_initialize_utils): If MPW, don't try to use termcap to
+	compute the window size.
+	* config/m68k/xm-mpw.h (printf, fprintf, fputs, fputc, putc,
+	fflush): Define as macros that expand into hacked_... versions.
+	(StandAlone, mac_app): Declare.
+	* macgdb.r (SIZE): Set the default partition to 4000K.
+	* mac-xdep.c (readline.h, history.h): Include.
+	(terminal.h): Don't include.
+	(mac_app): Define.
+	(gdb_has_a_terminal): Define Mac-specific version.
+	(do_keyboard_command): Simplify search for command string.
+	(readline): Define as gdb_readline.
+	Add other history/readline stubs to make main gdb link.
+	(hacked_fprintf, hacked_printf, hacked_vfprintf, hacked_fputs,
+	hacked_fputc, hacked_fflush): New functions, intercept output to
+	stdout and stderr, send to console window.
+
+	* mpw-make.in (MacGDB): New target, standalone Mac-hosted gdb.
+	(XDEPFILES): Define.
+	(main.c.o): Compile with gC instead of C.
+	* mac-defs.h: New file, menu etc definitions shared between
+	C and Rez files.
+	* macgdb.r: New file, Rez (resource compiler) resource
+	definitions.
+	* mac-xdep.c: New file, Mac host interface code.
+	* config/m68k/xm-mpw.h (PATHNAME_SEPARATOR): Rename to
+	DIRNAME_SEPARATOR.
+	(PATHNAME_SEPARATOR_STRING): Remove.
+	(SIGQUIT, SIGHUP): Define.
+	(fileno, R_OK): Define.
+
+	* mpw-config.in: New file, MPW configuration fragment.
+	* mpw-make.in: New file, MPW makefile fragment.
+	* config/m68k/xm-mpw.h: New file, MPW host definitions.
+	* ser-mac.c: New file, Mac serial interface.
+
+Mon Apr 10 16:47:57 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* valprint.c (print_longest): Fix a syntax error in #ifdef 
+	PRINTF_HAS_LONG_LONG.
+
+	* config/mips/xm-irix5.h: turn on CC_HAS_LONG_LONG and 
+	PRINTF_HAS_LONG_LONG.
+	* config/mips/tm-irix5.h: turn on FORCE_LONG_LONG.
+
+Sat Apr  8 02:47:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  Use new variable 
+	nodebug_var_symbol_type as type of variables which don't have any
+	ecoff debug info associated with them.
+	(parse_symbol, parse_procedure):  Use heuristics to determine if
+	functions were compiled without debugging info and change their
+	type to nodebug_function_symbol_type.
+	(_initialize_mdebugread):  Initialize nodebug_*_symbol_type.
+
+	* source.c (line_info):  Clear sal.pc for `info line' without
+	arguments.
+
+Fri Apr  7 17:43:01 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* monitor.c:  make_xmodem_packet and print_xmodem_packet go away.
+	send_xmodem_packet shows up to do the obvious.  Lots of fixes to
+	xmodem downloads including resetting of block number at start of
+	new transfers, fix for buffer overrun problem, addition of CRC
+	generation code.
+	* (monitor_open):  loadtype_str and loadproto_str now default to
+	first entry in monitor_ops->loadtypes.
+	* (monitor_wait):  Lengthen register dump buf, because of verbose
+	Winbond monitor.
+	* (monitor_fetch_register):  Report unimplemented registers as 0.
+	* (monitor_read_memory):  Only do 16 byte aligned transfers
+	because of formatting weirdness with the Winbond monitor.  Also,
+	ignore non-hex, non-whitespace formatting between bytes (same
+	monitor).
+	* (monitor_load):  Clean up logic.
+	* (monitor_load_srec):  Re-do xmodem support.  Move lots of it
+	into send_xmodem_packet.
+	* (getacknak):  Get rid of polls and timeouts.  Handle CRC
+	requests from receiver.
+	* (monitor_make_srec):  Efficiency improvements.  Don't call
+	sprintf to output two digit hex numbers.
+	* (crcinit, docrc):  New, CRC-16 support routines.
+	* (send_xmodem_packet):  New routine to generate either CRC-16 or
+	checksummed xmodem packets.
+
+	* remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
+	Reduce tables down to only the load types supported by each
+	monitor.
+
+	* w89k-rom.c  (w89k_supply_register):  Parses output of Winbond
+	register dumps.
+	* (w89k_loadtypes, w89k_loadprotos):  Reduce to just srec/xmodem.
+	* (w89k_cmds):  Add clear all breakpoints, memory fill, and dump
+	registers commands.
+
+	* config/pa/tm-hppa.h:  Define lots register offsets needed by
+	w89k-rom.c.
+
+
+Thu Apr  6 17:00:46 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* Makefile.in (X11_INCLUDES): Define as empty.
+	(X11_CFLAGS): Define as including $(X11_INCLUDES).
+	(X11_LIB_SWITCHES): Define as empty.
+	(X11_LIBS): Define as -lX11.
+
+
+Wed Apr  5 19:57:38 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mips-tdep.c (mips_print_register): Remove unused variable
+	our_type and call to init_type.  Fixes memory leak.  Reindent function.
+
+	* mips-tdep.c (mips_print_register), findvar.c
+	(write_register_bytes): Make buffer char[] instead of unsigned
+	char[].
+
+Mon Apr  3 19:28:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* top.c, utils.c, main.c, defs.h: Replace error_pre_print with two
+	variables: error_pre_print (for RETURN_ERROR) and quit_pre_print
+	(for RETURN_QUIT).  Fixes a bug whereby typing ^C (e.g. in "maint
+	print sym") could output extraneous stuff.
+	* objfiles.c: Don't declare error_pre_print; defs.h does it.
+
+Mon Apr  3 13:48:28 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* monitor.h:  Add MO_GETMEM_NEEDS_RANGE flag.
+	* monitor.c (monitor_read_memory):  Use previously mentioned flag
+	to send proper format memory examine commands to the w89k monitor.
+	Also, try to handle bizarre format of memory dump...
+
+	* op50-rom.c w89k-rom.c:  Update to new monitor.[ch] conventions.
+
+Sat Apr  1 03:22:20 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
+	Handle relocated symbol address.
+	* partial-stab.h, case N_SO, SOFUN_ADDRESS_MAYBE_MISSING:
+	Do not relocate a zero address.
+
+Thu Mar 30 19:46:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/a29k/tm-a29k.h: Nuke obsolete define CONTROL_END_ADDR; it
+	is nowhere used.
+
+	* stabsread.c (read_range_type): Remove FIXME comment about
+	type-id (I presume this meant a number followed by = followed by a
+	type) versus type number; Per fixed it.
+
+Wed Mar 29 09:56:04 1995  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+	* configure.in: sparc-*-sunos5* is same as sparc-*-solaris2*.
+
+Wed Mar 29 18:30:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-e7000.c (why_stop): Add new kinds of strings to expect
+	from the emulator.
+	(e7000_wait): Add interpretations for more stop reasons,
+	including warnings for write protect and cycle address errors.
+
+Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c monitor.h remote-est.c rom68k-rom.c:  Add start of
+	support for interrupting target.
+	* monitor.c (monitor_open):  Send stop command before doing
+	anything else.
+	* (monitor_load_srec):  Fix record size calculation to prevent end
+	of segment from getting trashed.
+	* rom68k-rom.c:  Update to latest version of struct monitor_ops.
+	* config/sparc/tm-sparc.h (FIX_CALL_DUMMY):  Fix byte-order
+	problems.  Makes DOS hosted function calling work.
+	* sparclite/crt0.s:  Define _start to make COFF happy.
+
+Wed Mar 29 09:11:51 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* defs.h (atof): Don't provide an external declaration if atof is
+	a macro.
+
+Wed Mar 29 00:01:07 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* rs6000-tdep.c (skip_prologue):  Skip saving of LR and CR in
+	the stack frame, fix typos in `st rx,NUM(r1)' and `stu r1,NUM(r1)'
+	tests.
+
+Tue Mar 28 17:04:04 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdbtypes.c (create_range_type):  If indextype has TYPE_FLAG_STUB
+	set, set TYPE_FLAG_TARGET_STUB.
+	(check_stub_type):  Recalculate TYPE_LENGTH for range type.
+	* stabsread.c (read_range_type):  If index type number is followed
+	by '=', back up, call read_type. and assume we have a true range.
+	* gdbtypes.h (TYPE_FLAG_TARGET_STUB):  Update comment.
+
+Mon Mar 27 22:51:54 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* alpha-nat.c, irix4-nat.c, irix5-nat.c, mipsv4-nat.c,
+	sparc-tdep.c (supply_gregset, supply_fpregset):  Fill inaccessible
+	registers with zero to handle recent read_register_bytes change.
+	* irix4-nat.c, irix5-nat.c, mipsv4-nat.c (supply_gregset,
+	fill_gregset):  Fix handling of CAUSE_REGNUM.
+	* mips-nat.c (store_inferior_registers):  Handle unwritable
+	registers when storing a single register.
+	* config/mips/tm-irix3.h (CAUSE_REGNUM, BADVADDR_REGNUM):
+	Fix definitions.
+
+	* mdebugread.c (parse_symbol, psymtab_to_symtab_1):  Clear
+	allocated mips_extra_func_info, if the debug info is corrupt,
+	the PDR to fill it in might be missing.
+
+Mon Mar 27 14:43:00 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* vx-share/regPacket.h: a new file interfacing with vxworks.
+
+Sun Mar 26 13:22:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (bpstat_do_actions): Once we've executed the
+	commands, set bs->commands to NULL.
+
+Sat Mar 25 01:16:10 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* buildsym.c (patch_subfile_name):  Update last_source_file
+	with the real source file name.
+	* dbxread.c (end_psymtab):  Handle static functions in the
+	SOFUN_ADDRESS_MAYBE_MISSING case by passing pst->filename
+	to lookup_minimal_symbol.
+	(process_one_symbol):  Ignore extra outermost context from
+	SunPRO cc and acc.
+	* stabsread.c (define_symbol):  Do not complain for SunPRO
+	static variable encoding if STATIC_TRANSFORM_NAME is defined.
+	* sparc-tdep.c, config/sparc/tm-sun4sol2.h
+	(sunpro_static_transform_name):  Renamed from
+	solaris_static_transform_name.
+	* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
+	Define to sunpro_static_transform_name for acc 3.0 compiled
+	executables.
+	* procfs.c, config/alpha/nm-osf2.h (PROCFS_DONT_TRACE_FAULTS):
+	Renamed from PROCFS_DONT_TRACE_IFAULT, don't trace any faults
+	if defined.
+	* procfs.c (info_proc_siginfo):  Cast sip->si_addr to
+	`unsigned long' and use `lx' format for printing it.
+
+Fri Mar 24 15:45:42 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Move test for m68*-est-* before m68*-*-coff*.
+	* findvar.c:  Move default def of CANNOT_STORE_REGISTER closer to
+	the beginning of the code.
+	* (write_register_gen):  New routine.  Analogous to
+	read_register_gen.
+	* (write_register_bytes):  Another rewrite!  Make it smarter about
+	not updating regs with the same value.
+	* monitor.c (printf_monitor readchar):  Use stderr instead of
+	stdout to output debug info.  Also cleanup readchar a little.
+	* (expect):  Make sure that excessive responses are null
+	terminated.
+	* (monitor_open):  Check for magic number in monitor_ops struct.
+	Allow multiple commands as init strings.  Also, clear all
+	breakpoints.
+	* (monitor_resume monitor_wait):  Send a command to dump all the
+	regs for those targets which don't do so when waking up after a
+	continue command.
+	* (monitor_wait):  Handle excessive response output better.
+	* (monitor_write_memory):  Use block fill, word, and long word
+	commands (if they exist) to write memory more efficiently.
+	* General cleanups to use flag bits instead of individual flag
+	words in monitor_ops struct.
+	* (monitor_command):  Return output from command.
+	* (monitor_load_srec):  Allocate buffer only once.  Use alloca.
+	Wait for load response string instead of using a timeout to start
+	sending S-records.  Fix bug where value of srec_frame shrinks.  If
+	hashmark is set, print `-' for retransmissions.  General cleanups.
+	* (monitor_make_srec):  Get rid of S-record default type kludge.
+	* monitor.h:  Use seperate struct for memory and register
+	read/write commands.  Memory commands can come in byte, word,
+	long, and longlong forms.
+	* (monitor_ops):  Change lots of fields.  Generalize some stuff.
+	Put all flags into flags word.  Allow init to be a list of commands.
+	Add command for clearing all breakpoints, block fill, dumping all
+	registers.
+	* remote-est.c:  Rewrite to use new monitor conventions.
+	* config/m68k/est.mt (TDEPFILES):  Add monitor.o.
+	* config/m68k/tm-est.h:  Set NUM_REGS to 18.
+	* testsuite/gdb.base/break.exp:  Lots of cleanups.  Use gdb_test
+	more thoroughly.
+
+Thu Mar 23 23:20:00 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+        * somsolib.c (som_solib_add): Handle case where a shared library
+        referenced by a core file has sections without the SEC_ALLOC bit
+        set (eg stabs sections).
+
+Thu Mar 23 15:07:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (bpstat_do_actions): For each element in the bpstat
+	chain, do all the commands regardless of whether they run the
+	inferior.
+
+Wed Mar 22 19:17:06 1995  Doug Evans  <dje@cygnus.com>
+
+	* mem-break.c (LITTLE_BREAKPOINT, BIG_BREAKPOINT): Define as
+	BREAKPOINT if mono-endian.
+	(break_insn): Deleted.
+	(big_break_insn, little_break_insn): Define.
+	(memory_insert_breakpoint): Handle bi-endian cpus.
+	(BREAKPOINT_LEN): Define.
+	(memory_remove_breakpoint): Use it.
+	(memory_breakpoint_size): Likewise.
+
+Tue Mar 21 17:03:17 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* sparc-stub.c: add nop after 'bg good_wim'.
+	* sparcl-stub.c: ditto.
+
+Tue Mar 21 13:34:12 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (handle_command): Don't print TARGET_SIGNAL_0,
+	TARGET_SIGNAL_UNKNOWN, or TARGET_SIGNAL_DEFAULT.
+
+Mon Mar 20 10:09:59 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppab-nat.c (store_inferior_registers): Sync with HPUX version.
+
+Mon Mar 20 07:34:48 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* hppah-nat.c (store_inferior_registers):  Move check for
+	CANNOT_STORE_REGISTER to a better place.  Fixes ptrace I/O errors
+	found by test suite during function calls, which attempts to write
+	unwritable registers.
+
+Sat Mar 18 02:02:24 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  If finishing a function without
+	known parameter type info, set that from parameter symbols.
+	Remove commented-out add_param_to_type support.
+
+Thu Mar 16 16:38:03 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (process_linenos): Make sure filename we pass to
+	start_subfile will cause deduce_language_from_filename to return
+	the correct thing.  Reindent function to GNU standards.
+
+Thu Mar 16 15:54:00 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlm/gdbserve.c (handle_exception): #if out call to StopBell,
+	  as it is not available on NetWare 3 or PIN.
+	* nlm/ppc.c (StopBell): Removed.
+
+Thu Mar 16 12:14:41 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): When creating a dummy parameter
+	inferred from the traceback tags, give its type the name
+	"<non-float parameter>".
+
+	* stabsread.c (rs6000_builtin_type): Recognize types -31 to -34.
+
+Wed Mar 15 15:09:29 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (read_register_bytes write_register_bytes):  Make
+	these routines much smarter about updating registers from the
+	target, only doing so when absolutely necessary.  This really
+	speeds up register modification on some remote targets.
+
+	* monitor.c:  More cleanups.  Get rid of monitor_load_ascii_srec.
+	BFD makes this unnecessary.  Lots of debugging speedups.
+	* (expect):  NULL terminate return string.
+	* (monitor_open	monitor_supply_register parse_register_dump
+	monitor_wait monitor_fetch_register):  Switch to using GNU regexp
+	library to parse multi-register displays.
+	* (monitor_read_memory): Read multiple bytes (up to 16) at once.
+	* (monitor_create_inferior):  Call clear_proceed_status to make run
+	command notice first breakpoint.
+	* (monitor_load):  Clean up.  Reset inferior_pid, set pc to start
+	address and reset symbol table stuff to make loads put things into
+	a fresh state.
+	* (monitor_load_srec):  Lower sleep time to 1 second.
+
+	* monitor.h (struct monitor_ops):  Add register_pattern and
+	supply_register to monitor_ops.
+
+	* rom68k-rom.c:  Add new support for handling register dumps.
+	* config/m68k/tm-m68k.h:  Define D0_REGNUM and A0_REGNUM for register
+	dump handling.
+
+Wed Mar 15 15:18:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c, defs.h (putchar_unfiltered, fputc_unfiltered): Make
+	argument be an int, not a char.  Using a prototype followed by an
+	old-style function definition in a case where an argument is
+	widened is a GCC-ism not supported by the native AIX compiler.
+
+Wed Mar 15 12:22:35 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlmstub.def: Removed, this was moved to nlm/gdbserve.def 
+	  long ago.
+
+	* configure.in (alpha-*-netware*): Removed configuration.
+	* config/alpha/{alpha-nw.mt, gdbserve.mt, tm-alphanw.h}: Removed.
+	* nlm/{README-ALPHA-NETWARE, aio.h, alpha-io.S, alpha-regdef.h,
+	  alpha.c, alpha.h, altdebug.h}: Removed.
+
+	* nlm/gdbserve.c (main): Add support for processing BOARD=
+	  argument, deprecate NODE=.
+
+Wed Mar 15 10:58:26 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* c-exp.y (yylex): Make an empty character constant an error.
+
+Tue Mar 14 15:00:54 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (value_arg_coerce):  Do possible value_coerce_array
+	before determining type argument to value_cast.
+
+Tue Mar 14 10:41:41 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-es.c: Replace ignore with 0.
+
+Tue Mar 14 05:52:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (value_repeat), eval.c (evaluate_subexp_standard):
+	If VALUE_REPEATED is already set, just error out.
+
+	* valops.c (value_cast, value_slice), parse.c (follow_types): Add
+	FIXME-type-allocation comments.
+
+	* gdbtypes.h (struct type): Fix comment about what units the
+	TYPE_LENGTH is in.
+
+Mon Mar 13 18:27:25 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* ch-valprint.c (annotate.h): Include.
+	* eval.c (evaluate_subexp_standard): Remove unused variable.
+	(calc_f77_array_dims): Add parens to expression.
+	* f-exp.y (yylex): Add parens to expression, remove unused label.
+	* f-lang.h (calc_f77_array_dims): Declare.
+	* f-valprint.c (f_val_print): Remove unused variables.
+
+Mon Mar 13 15:25:47 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* alpha-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
+	use the PDR, just examine prologues instead.
+
+Fri Mar 10 16:13:18 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/arc/tm-arc.h: Change arc register names.
+
+Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Fix problems with infinite recursion when printing a class
+	that contains a static instance of the class.
+	* cp-valprint.c (dont_print_vb_obstack):  Renamed from
+	dont_print_obstack, made static.
+	(dont_print_statmem_obstack):  New obstack, controls printing
+	of static member classes.
+	(_initialize_cp_valprint):  Initialize it.
+	(cp_print_static_field):  New function, handles printing of
+	static members.
+	(cp_print_value_fields):  New parameter dont_print_statmem to
+	handle recursive printing of static member classes, use
+	cp_print_static_field to handle printing of static members.
+	* c-valprint.c (cp_print_value_fields):  Update prototype and
+	call to include additional dont_print_statmem parameter.
+	* c-valprint.c, f-valprint.c (dont_print_obstack):  Remove unused
+	extern declaration.
+
+	* alpha-tdep.c, findvar.c, infptrace.c:  Include <string.h>.
+
+	* config/alpha/tm-alpha.h (FRAME_FIND_SAVED_REGS):  Call
+	alpha_find_saved_regs if fi->saved_regs is still NULL.
+
+	* elfread.c (elf_symtab_read):  Ensure that the filename field
+	of a minsym is nonempty. Ignore solib trampoline symbols from
+	the main symbol table, they might have a bogus value.
+
+	* procfs.c (set_proc_siginfo), config/alpha/alpha-osf2.mh:
+	Fix typos in comments.
+
+Thu Mar  9 17:19:47 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* mdebugread.c (parse_symbol, psymtab_to_symtab_1): Initialize
+	pdr.framereg field of MIPS_EFI_SYMBOL_NAME symbol to -1.  That way
+	we know whether the PDR ever got set.
+	* mips-tdep.c (find_proc_desc): If pdr.framereg field is -1, don't
+	use the PDR, just examine prologues instead.
+
+Wed Mar  8 23:35:10 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (som_solib_section_offsets): Get offset of text
+	section right. 
+
+Wed Mar  8 16:12:21 1995  Stu Grossman  (grossman@cygnus.com)
+
+
+	* source.c (forward_search_command reverse_search_command):  Set
+	convenience variable $_ to be the line # of the match.
+	* symtab.c (decode_line_1):  Allow convenience variables to be
+	used in line specs (for breakpoints and such).
+
+Wed Mar  8 12:51:00 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (VERSION): Bump to 4.14.1.
+	* NEWS, README: Update for 4.14.
+	* i386v-nat.c (i386_insert_aligned_watchpoint): Fix declaration.
+	(i386_insert_nonaligned_watchpoint): Call aligned instead of
+	generic watchpoint insertion.
+
+Tue Mar  7 19:26:10 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (value_slice):  Do COERCE_VARYING_ARRAY.
+
+Tue Mar  7 00:23:47 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c, array-rom.c, monitor.h, rom68k-rom.c:  Move target_ops
+	into monitor.c.
+	* monitor.c (monitor_create_inferior):  Allow run command to start
+	program.
+
+	* monitor.c (monitor_load):  Set PC to start address when done
+	loading.
+
+	* array-rom.c, monitor.h, rom68k-rom.c:  Clean up target_ops.
+	Remove ref to monitor_create_inferior.
+
+	* monitor.c:  More general cleanups.  Add prototypes, remove
+	unused routines.  Fix bug with wrong number of args to error().
+
+	* main.c (main):  Don't start up GUI when running under gdb mode
+	in emacs.
+
+	* Makefile.in:  Add rules for monitor.o and rom68k-rom.o to make
+	Sun make (with VPATH) work...
+
+	* monitor.c, monitor.h, rom68k-rom.c:  Serious cleanup to make IDP
+	(rom68k) target work right.
+	* array-rom.c, op50-rom.c, w89k-rom.c:  Partial updates to new
+	monitor.c interface.  More work needs to be done here.
+	* config/m68k/tm-monitor.h:  Change DECR_PC_AFTER_BREAK to 0 to
+	match the IDP monitor.  Also, set NUM_REGS to 18 cuz there's no
+	floating-point for this card.
+
+	* serial.h, ser-go32.c, ser-mac.c, ser-tcp.c, ser-unix.c: Add
+ 	SERIAL_SETSTOPBITS to set the number of stopbits (needed for IDP
+ 	board?!?!?).
+
+	* defs.h, utils.c, remote-hms.c, remote-pa.c, remote.c:  Fix defs
+	and usage of fputc_unfiltered and putchar_unfiltered.  Eliminate
+	putc_unfiltered (it's superfluous).
+
+	* command.h, command.c, top.c:  Add var_enum command type.  It's
+	like var_string but allows only only one of the specified strings.
+
+Mon Mar  6 15:03:59 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (value_cast): Don't use backslash newline--pre-ANSI
+	compilers (such as SunOS4 /bin/cc) don't generally support it
+	except in some contexts.
+
+Fri Mar  3 17:42:48 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (value_cast):  Check for cast to array type *before*
+	we coerce array to pointer (in case arg2 is already array).
+
+	* valops.c (call_function_by_hand):  Set using_gcc to 2 if using
+	gcc2.  Needed for REG_STRUCT_HAS_ADDR to work on sparc.
+	Also check REG_STRUCT_HAS_ADDR for union, array and string types.
+
+	* valops.c (call_function_by_hand):  Re-arrange code for pushing
+	paramaters on the stack so we can do better STACK_ALIGN.
+
+	* valops.c (call_function_by_hand):  Call error if the number
+	of arguments is fewer than parameter types in function type.
+
+Fri Mar  3 17:13:05 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* sparc-tdep.c (sparc_extract_struct_value_address): Move
+	sparc64 support to here.
+	(sparc64_extract_struct_value_address): Deleted.
+	(dump_ccreg): Add a prototype so long long arg -> int.
+	* sparc/tm-sp64.h (USE_STRUCT_CONVENTION): Define.
+	(EXTRACT_STRUCT_VALUE_ADDRESS): Delete.
+
+Fri Mar  3 15:12:12 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_record_lines): New argument "offset".  All
+	callers changed.  Use it to handle dynamic address relocation.
+	(hpread_build_psymtabs): Adjust texthigh as we read each function
+	debug symbol.  Fix computation of texthigh.
+	(hpread_read_subrange_type): Work around macro bugs in HP's
+	compilers.
+	(hpread_process_one_debug_symbol): Correctly map source lines.
+
+	* somread.c (check_strange_names): Filter names emitted by the HP
+	compiler when generating PIC code.
+
+	* valops.c (value_struct_elt_for_reference): Work around macro
+	bugs in HP's compilers.
+	* c-exp.y (block): Likewise.
+
+Fri Mar  3 12:27:28 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* rs6000-tdep.c (push_dummy_frame): Fix order of arguments to
+	store_address.
+
+	* utils.c [_AIX]: Include stddef.h instead of #defining size_t.
+
+Fri Mar  3 12:33:24 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* rs6000-tdep.c (skip_prologue): Skip multiple stores of the saved
+	registers that GCC emits on the PowerPC by default in addition to
+	the store multiple instruction used on the Power series.
+
+Fri Mar  3 00:54:58 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* sparc-tdep.c (decode_asi): New function.
+	(sparc_print_register_hook): Pretty print more v9 registers.
+	* sparc/tm-sp64.h (REGISTER_NAMES): Fix some typos.
+
+Thu Mar  2 22:20:22 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* dwarfread.c (struct dieinfo): Use CORE_ADDR for at_{low,high}_pc.
+	(target_to_host): Change result type to CORE_ADDR.
+
+Thu Mar  2 15:13:04 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* rs6000-tdep.c: Fix byte-swapping sins.
+
+Thu Mar  2 16:48:45 1995  Michael Meissner  <meissner@cygnus.com>
+
+	* rs6000-tdep.c (branch_dest): Minor code cleanup, don't share
+	code between branch unconditional and branch conditional cases.
+
+Wed Mar  1 09:41:26 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	Various changes for sparc64.
+	* sparc-tdep.c (NUM_SPARC_FPREGS): Define.
+	(SPARC_INTREG_SIZE): Define.
+	(*): Use SPARC_INTREG_SIZE instead of REGISTER_RAW_SIZE (intreg)
+	where appropriate.
+	(enum branch_type): New value `done_retry'.
+	(isbranch): Renamed from isannulled.  All callers changed.
+	Support new sparc64 branch insns.
+	(single_step): Handle done_retry.
+	(sparc_extract_struct_value_address): Don't assume 4 byte regs.
+	(get_saved_register): Likewise.
+	(sparc_push_dummy_frame): Likewise.
+	(sparc_frame_find_saved_regs): Likewise.
+	(sparc_pop_frame): Likewise.  Don't refer to FPS_REGNUM, CPS_REGNUM,
+	or PS_REGNUM if not sparc64.  sparc64 has 64 fp regs.
+	(sparc64_extract_struct_value_address): New function.
+	(dump_ccreg, sparc_print_register_hook): Likewise.
+	* sp64-tdep.c: Deleted.
+	* sparc/tm-sp64.h (GDB_TARGET_IS_SPARC64): Define.
+	(NUM_REGS): Reduce by 2, cle/tle are in the pstate reg.
+	(CC_HAS_LONG_LONG): Define.
+	(REGISTER_NAMES): Delete cle/tle and reorganize.
+	(PS_REGNUM, FPS_REGNUM, CPS_REGNUM): Delete, they're ifdef'd out of
+	sparc-tdep.c now.
+	(REGISTER_BYTES): Update.
+	(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Delete.
+	(EXTRACT_RETURN_VALUE): Delete.  Use definition in tm-sparc.h.
+	(NO_SINGLE_STEP): Likewise.
+	* sparc/tm-sparc.h (EXTRACT_VALUE_RETURN): Don't assume 4 byte regs.
+	* sparc/sp64.mt: Move simulator support ...
+	* sparc/sp64sim.mt: ... to here.
+
+Wed Mar  1 13:14:42 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-vx960.c: new file for target specific register packaging.
+	* remote-vx68.c: ditto.
+	* config/i960/vxworks960.mt: add remote-vx960.o.
+	* config/m68k/vxworks68.mt: add remote-vx68.o.
+
+Wed Mar  1 13:42:49 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* remote.c (remote_wait): Make calls to strtol be type correct by
+	passing the address of a char * pointer instead of an unsigned
+	char *.
+
+	* rs6000-tdep.c (push_dummy_frame): Cast sp to char * when calling
+	write_memory to make things type correct.
+
+Wed Mar  1 12:17:31 1995  Michael Meissner  <meissner@cygnus.com>
+
+	* ch-exp.y, c-exp.y, f-exp.y, m2-exp.y (yy defines): Support the
+	standard Linux yacc by adding more names to be redefined with a
+	prefix.
+
+Tue Feb 28 22:55:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* hppa-tdep.c (pa_print_registers), monitor.c: Use
+	extract_unsigned_integer and friends, not SWAP_TARGET_AND_HOST.
+	* defs.h, findvar.c: Move SWAP_TARGET_AND_HOST back to findvar.c.
+	Rename it to SWAP_FLOATING to make it clear it is no longer for
+	integers.
+
+Tue Feb 28 14:38:39 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* defs.h (SWAP_TARGET_AND_HOST): check endianess at runtime not
+	compile time.
+	* arc-tdep.c (_initialize_arc_tdep): set tm_print_insn according to 
+	processor.
+
+	* vx-share/ptrace.h: merge in WRS new ptrace requests.
+
+	* defs.h: fix a syntax error.
+
+	* a29k-tdep.c (get_longjmp_target): add this function, from WRS.
+	* remote-vx.c: move read_register and write_register out to 
+	target specific files.
+	* remote-vx29k.c (get_fp_contnets): add this function, from WRS.
+
+	* defs.h: define SWAP_TARGET_AND_HOST macro.
+	* findvar.c, monitor.c, hppa-tdep.c: remove definition of
+	SWAP_TARGET_AND_HOST.
+
+Tue Feb 28 08:31:40 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* alpha-tdep.c (find_proc_desc): Only attempt to set
+	PROC_LOCALOFF (found_heuristic) if found_heuristic is non-NULL.
+
+Mon Feb 27 11:56:32 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.c: General gcc -Wall lint cleanup and reformat.
+	(monitor_command): If no args, send an empty command.
+
+Thu Feb 23 21:07:25 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* monitor.c (monitor_load_ascii_srec):  Add a one second sleep
+	after send LOAD_CMD to prevent loss of first S-record.
+
+Tue Feb 21 20:48:42 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valops.c (call_function_by_hand):  Set using_gcc to 2 if gcc-2.
+	Call error if too few arguments.
+	If REG_STRUCT_HAS_ADDR (structs passed by invisible reference),
+	copy and convert to reference *before* we calculate alignment.
+	Also, make sure structs allocated for return values and invisible
+	reference don't violate STACK_ALIGN.
+
+Tue Feb 21 23:29:59 1995  Per Bothner  <bothner@rtl.cygnus.com>
+
+	* ch-exp.y (expression_conversion):  Recognize 'ARRAY () TYPE (EXPR)'
+	(same as C's '(TYPE[])EXPR')
+
+Tue Feb 21 11:47:26 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (print_gdb_version): Update the year.
+
+Sun Feb 19 14:31:57 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Look for newlib in
+	`..' not in `../..'.
+
+Sun Feb 19 11:05:28 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* procfs.c (unconditionally_kill_inferior):  Don't issue a PIOCKILL
+	in addition to a PIOCSSIG to kill the inferior.
+
+Thu Feb 16 15:06:12 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* parse.c (follow_types):  Given (TYPE[]) (i.e. with no length),
+	create a 0-length array type, and set BOUND_CANNOT_BE_DETERMINED.
+	* valops.c (value_cast):  If a cast like (TYPE[])VALUE (i.e. array
+	of unknown length) use sizeof(VALUE)/sizeof(TYPE) as the length.
+	* c-typeprint.c (c_type_print_varspec_suffix):  If array length
+	is 0, print it, but not if upper_bound is BOUND_CANNOT_BE_DETERMINED.
+
+Thu Feb 16 16:06:50 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* dcache.c (insque, remque): Rewrite Linux support.
+
+Wed Feb 15 12:33:20 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/tm-ppc-eabi.h (TEXT_SEGMENT_BASE): Define as 1.
+
+	* dcache.c (insque, remque): If compiling in standard C on Linux,
+	protect insque and remque with macros to cast the pointer
+	arguments to the proper type.
+
+Tue Feb 14 17:16:41 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* annotate.c, breakpoint.c, defs.h, top.c:  Replace
+	enable/disable_breakpoint_hook with modify_breakpoint_hook.
+
+Tue Feb 14 16:58:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* expression.h: Move declaration of evaluate_subexp_with_coercion
+	from here...
+	* value.h: ...to here.
+	* expression.h: Don't include value.h
+
+Tue Feb 14 11:46:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* expression.h: Move include of value.h until after declaration of
+	enum exp_opcode.
+
+Sun Feb 12 13:47:30 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-e7000.c: Comprehensive cleanup; removal of dead code,
+	simplify code, declare things, format to standards.
+	(inferior.h, value.h, command.h, remote-utils.h): Include.
+	(e7000_login): Rename to e7000_login_command.
+	(e7000_ftp): Rename to e7000_ftp_command.
+	(e7000_drain): Rename to e7000_drain_command.
+
+	* irix5-nat.c (string.h): Include near beginning of file.
+
+Sun Feb 12 12:36:38 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valops.c (value_arg_coerce): Use VALUE_TYPE not SYMBOL_TYPE on
+	arg, it is a value not a symbol.
+
+	gcc -Wall lint:
+	* eval.c: Move declaration of evaluate_subexp_with_coercion from here..
+	* expression.h: ..to here.
+	* expression.h: Include value.h.
+	* ch-lang.c (evaluate_subexp_chill): Add default case in switch.
+
+Sun Feb 12 11:03:47 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* language.h (struct language_defn):  New field evaluate_exp.
+	* c-lang.c (c_language_defn, cplus_language_defn, asm_langauge_defn),
+	f-lang.c (f_language_defn), language.c (unknown_language_defn,
+	auto_language_defn, local_language_defn), m2-lang.c (m2_language_defn):
+	Set evaluate_exp to evaluate_subexp_standard.
+	* ch-lang.c (evaluate_subexp_chill):  New function.  Chill-specific
+	support for MULTI_SUBSCRIPT.
+	(chill_language_defn):  Set evaluate_exp to evaluate_subexp_chill.
+	* eval.c (enum noside):  Move from here ....
+	* expression.h (enum noside):  ... to here.
+	(evaluate_subexp_standard):  New prototype.
+	* eval.c (evaluate_subexp):  Renamed to evaluate_subexp_standard.
+	Removed lo-longer-needed test for chill_varying_type.
+	(evaluate_subexp):  New.  Calls exp->language_defn->evaluate_exp.
+
+	* ch-exp.y (maybe_expression_list):  New non-terminal.
+	(primitive_value):  Allow empty parameter list.
+
+Sun Feb 12 10:02:16 1995  Per Bothner  <bothner@cygnus.com>
+
+	* buildsym.c (finish_block):  If finishing a function without known
+	parameter type info, set that from parameter symbols.
+	* c-typeprint.c (c_type_print_varspec_suffix):  For TYPE_CODE_FUNC,
+	print parameter types, if available.
+	* ch-typeprint.c (chill_type_print_base):  Likewise.
+
+	* gdbtypes.h (struct type):  Remove function type field.
+	(TYPE_FUNCTION_TYPE):  Remove macro.  We can't as simply re-use
+	function types now that we're also storing parameter types.
+	And the payoff is much less.
+	* gdbtypes.c (make_function_type):  Don't use/set TYPE_FUNCTION_TYPE.
+	(recursive_dump_type):  Don't print TYPE_FUNCTION_TYPE.
+	* dwarfread.c (read_subroutine_type):  Don't set TYPE_FUNCTION_TYPE.
+
+	* valops.c (value_arg_coerce):  Now takes param_type argument.
+	(call_function_by_hand):  Convert arguments with value_arg_coerce
+	early, and overwrite original args with converted args.
+	No longer need multiple calls to value_arg_coerce.
+	(value_arg_push):  Removed.
+	* hppa-tdep.c (hppa_push_arguments):  No longer call value_arg_coerce.
+	* mips-tdep.c (mips_push_arguments):  Likewise.
+	* alpha-tdep.c (alpha_push_arguments):  Likewise.
+	* rs6000-tdep.c (push_arguments, ran_out_of_registers_for_arguments):
+	Likewise.
+	* value.h (value_arg_coerce):  Remove declaration.  (It's now static.)
+
+	* valops.c (value_cast):  Do COERCE_VARYING_ARRAY after COERCE_REF.
+
+	* symtab.c (add_param_to_type):  Remove (commented-out) function,
+	since that functionality has been re-written.
+	* coffread.c:  Remove commented-out add_param_to_type support.
+	* mdebugread.c (parse_symbol):  Likewise.
+	* stabsread.c (define_symbol):  Likewise.
+
+Sun Feb 12 09:03:47 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* buildsym.c (start_subfile): Set language for f2c like for cfront.
+
+Thu Feb  9 20:20:11 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* op50n-rom.c: Add the control registers.
+
+Thu Feb  9 15:46:39 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (CLIBS): Add $(LIBIBERTY) before, in addition to
+	after, any host/target/native libraries.
+	* dcache.c (insque, remque): Remove declarations.
+	* gdbtypes.h (type_code): Remove trailing comma.
+
+	From Peter Schauer:
+	* xcoffread.c (read_xcoff_symtab) [C_HIDEXT]: Move #ifdef
+	STATIC_NODEBUG_VARS inside case.
+
+Thu Feb  9 07:43:41 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* config/sparc/tm-sun4sol2.h: Define STATIC_TRANSFORM_NAME.
+	* partial-stab.h: Call it.
+	* stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
+	STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
+	get the address.
+	* sparc-tdep.c (solaris_static_transform_name): New function.
+
+Thu Feb  9 12:09:09 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c (som_symtab_read): Handle dynamic relocation for both
+	text and data symbols.
+	(som_symfile_offsets): If objfile is a shared library, then get
+	text and data offsets from the shared library structures.
+	* somsolib.c (som_solib_add): Copy the bfd pointer from the
+	objfile rather than reopening the file again.
+	(som_solib_section_offsets): New function.
+	* somsolib.h (som_solib_section_offsets): Declare.
+
+Wed Feb  8 20:32:18 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* config/sparc/tm-sun4sol2.h, dbxread.c: Rename
+	N_SO_ADDRESS_MAYBE_MISSING to SOFUN_ADDRESS_MAYBE_MISSING.
+	* symtab.h (minimal_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]: Add
+	filename field.
+	* elfread.c (record_minimal_symbol_and_info),
+	minsyms.c, symtab.h (prim_record_minimal_symbol_and_info): Return
+	newly created symbol.
+	* elfread.c (elf_symtab_read) [SOFUN_ADDRESS_MAYBE_MISSING]:
+	Set filename field of minimal symbol.
+	* symmisc.c (dump_msymbols) [SOFUN_ADDRESS_MAYBE_MISSING]:
+	Print filename field.
+	* minsyms.c, symtab.h (lookup_minimal_symbol): New arg sfile.
+	* symm-tdep.c, somsolib.c, hppa-tdep.c, c-exp.y, f-exp.y,
+	m2-exp.y, nindy-tdep.c, m3-nat.c, irix5-nat.c, hpread.c,
+	os9kread.c, breakpoint.c, alpha-tdep.c, valops.c, symtab.c,
+	printcmd.c, dbxread.c: Change callers to pass NULL for sfile.
+	* dbxread.c (process_one_symbol) [SOFUN_ADDRESS_MAYBE_MISSING]:
+	Find address of function from minimal symbols.
+	* partial-stab.h, case 'f', 'F': Call find_stab_function_addr
+	instead of getting pst->textlow from the stab.
+	* minsyms.c (find_stab_function_addr): New function.
+
+Wed Feb  8 19:19:56 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c: Fix so all the output shows up in the GUI command
+	window.
+
+Mon Feb  6 18:50:59 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* i386-tdep.c (_initialize_i386_tdep): Put void decl on separate
+        line, so init.c generation works correctly.
+	* arc-tdep.c (_initialize_arc_tdep): Ditto.
+
+Mon Feb  6 14:44:36 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* config/mips/idt.mt: Add support for the lsi33k target.
+	* config/sparc/sun4sol2.mh: Add support for ser-tcp.
+	* array-rom.c: Finish the rest of the support commands needed by
+	GDB.
+	* mips-tdep.c: Add LSI33k register names and processor type.
+
+Sat Feb  4 13:29:52 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/m68k/est.mt (TDEPFILES): Remove m68k-pinsn.o.
+
+Fri Feb  3 11:19:20 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* core.c (dis_asm_read_memory), defs.h, top.c: Get rid of
+	dis_asm_read_memory_hook.  We can now call the disassemblers
+	directly and have no need for this hook anymore.
+	* defs.h, printcmd.c: Make print_insn be static.
+
+	* ser-go32.c (dos_comisr):  Make this 8 bit clean.
+	* (dos_open dos_close):  Allow multiple opens to the same device.
+	Use a ref count to prevent unwanted deallocations.
+	* sparcl-tdep.c:  Put #ifdefs around all socket stuff to make GO32
+	happy.
+	* (sparclite_ops):  Switch to download_stratum.
+	* target.h (enum strata):  Move download_stratum before
+	process_stratum so that executable targets get pushed on top of
+	download targets.
+
+Thu Feb  2 19:02:45 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* array-rom.c: Remove the non GDB remote protocol config stuff.
+
+	* monitor.c: All reading/writing functions for memory and
+	registers work.
+
+Thu Feb  2 16:11:04 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/arc/arc.mt: new target makefile for arc processor.
+	* config/arc/tm-arc.h: new target header for arc processor.
+	* config/arc/go32.mh: new go32 host makefile for arc processor.
+	* config/arc/xm-go32.h: new go32 host header for arc processor.
+	* arc-tdep.c: new target dependent codes for arc processor.
+
+Thu Feb  2 13:58:40 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (VERSION): Bump to 4.13.2.
+
+Thu Feb  2 07:27:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	Fix compiler warnings:
+	* remote-e7000.c (printf_e7000debug): Rename to puts_e7000debug
+	and have the caller do the sprintf.  Saves us from varargs hell.
+	(normal): Define before use.
+	* remote-e7000.c: Reindent a few things.
+
+Wed Feb  1 21:16:42 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* f-typeprint.c (f_type_print_varspec_suffix):  Print array index
+	ranges in reverse order.
+	* f-valprint.c (f77_create_arrayprint_offset_tbl):  Fix calculation.
+
+	* eval.c (evaluate_subscript):  Don't call value_subscript, since
+	it adjusts for lower bound and enforces ranges.
+
+	* expression.h (exp_code):  Remove MULTI_F77_SUBSCRIPT, OP_F77_SUBSTR.
+	* eval.c, parse.c:  Removed uses of removed opcodes.
+	* eval.c (evaluate_subexp):  Clean up handling of
+	OP_UNDETERMINED_ARGLIST (no backtracking, more general).
+
+	* f-valprint.c (f_val_print):  Print TYPE_CODE_STRING using
+	LA_PRINT_STRING, and not val_print_string (which reads from inferior).
+
+	* ch-lang.c (chill_is_varying_struct), ch-lang.h:  Remve function
+	duplicate function made redundant by chill_varying_type.
+
+	Re-write of f77 string and complex number support:
+
+	* language.h (struct language_defn):  New fields string_lower_bound
+	and string_char_type.
+	* c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn),
+	language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn), m2-lang.c (m2_language_defn), f-lang.c
+	(f_language_defn), ch-lang.c (chill_language_defn):  Set new fields.
+	* gdbtypes.c (create_string_type):  Use new string_char_type field.
+	* valops.c (value_string):  Use new string_lower_bound field.
+
+	* defs.h (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):  Removed.
+	* f-lang.c (f_create_fundamental_type, _initialize_f_language),
+	m2-lang.c (m2_create_fundamental_type),
+	gdbtypes.c (_initialize_gdbtypes):  Set TYPE_TARGET_TYPE of complex
+	types.  Set their TYPE_CODEs to TYPE_CODE_COMPLEX.
+	* mdebugread.c (mdebug_type_complex, mdebug_type_double_complex):
+	Removed.  Use builtin_type_complex and builtin_type_double_complex.
+
+	* gdbtypes.h (enum type_code):  Removed TYPE_CODE_LITERAL_STRING
+	and TYPE_CODE_LITERAL_COMPLEX.
+	* c-typeprint.c, f-typeprint.c, f-valprint.c, eval.c:  Removed uses of
+	TYPE_CODE_LITERAL_STRING and TYPE_CODE_LITERAL_COMPLEX.
+	* gdbtypes.c, gdbtypes.h (f77_create_literal_complex_type,
+	f77_create_literal_string_type):  Removed.
+	* value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_MEMADDR,
+	VALUE_SUBSTRING_MYADDR):  Removed.
+
+	* expression.h (enum exp_opcode):  Rename OP_F77_LITERAL_COMPLEX to
+	OP_COMPLEX.
+	* parse.c:  Update accordingly.
+
+	* f-valprint.c (f77_print_cmplx):  Removed.
+	(f_val_print case TYPE_CODE_COMPLEX):  Re-write to use print_floating.
+
+	* f-exp.y (STRING_LITERAL):  Use OP_STRING instead of OP_ARRAY.
+	* eval.c (evaluate_subexp):  For case OP_ARRAY, don't call
+	f77_value_literal_string.
+	* valops.c, value.h (f77_value_literal_string, f77_value_substring,
+	f77_assign_from_literal_string, f77_assign_from_literal_complex):
+	Removed.
+	(value_assign):  No longer need to handle literal types.
+	* valops.c (f77_value_literal_complex), value.h:  Re-written and
+	renamed to value_literal_complex.  Last arg is now a (complex) type.
+	* valops.c (f77_cast_into_complex):  Re-written and renamed to
+	cast_into_complex.
+	* eval.c (evaluate_subexp):  Update accordingly.
+
+	* ch-valprint.c (chill_val_print):  On TYPE_CODE_STRING, don't
+	print address for non-'s'-formats.
+	* ch-typeprint.c, ch-valprint.c:  Use chill_varying_type instead
+	of chill_is_varying_struct.
+
+Wed Feb  1 13:27:33 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	gcc -Wall lint.
+	* alpha-tdep.c (alpha_in_lenient_prologue): Comment out.
+	(after_prologue): Remove unused local b.
+	* procfs.c (thread.h): Include.
+	(pr_flag_table, pr_why_table, faults_table, siginfo_table): Use
+	nested braces in initializer.
+	* top.c (initialize_targets, initialize_utils): Declare.
+	(locate_arg, insert_args): Add parens around tested assignments.
+	* remote-utils.c (sr_scan_args): Remove decl of strtol.
+	* remote.c (thread.h): Include.
+	(remote_wait): Remove unused local p2.
+	* sparc-tdep.c (fill_gregset, fill_fpregset): Remove decls of
+	registers array.
+
+	defs.h (stdlib.h): Include.
+	(exit, perror, atoi, qsort, memcpy, memcmp): Don't declare.
+	(fclose, atof, malloc, realloc, free, strchr, strrchr, strstr,
+	strtok,	strerror): Don't specify parameter types in declaration.
+
+Wed Feb  1 12:23:57 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.y (value_string_element, string_primitive_value,
+	start_element, left_element, right_element, slice_size,
+	lower_element, upper_element, first_element):  Removed.
+	(value_string_slice, value_array_slice):  Replaced by ...
+	(slice):  New non-terminal, with working slice support.
+	(primitive_value_lparen, rparen):  New non-terminals.
+	(maybe_tuple_elements):  New non-terminal, to allow empty tuples.
+	(idtokentab):  Added "up".
+
+	* value.h (COERCE_VARYING_ARRAY):  New macro.
+	* valarith.c (value_subscript):  Use it.
+	* valops.c (value_cast):  Likewise.  Also, do nothing if already
+	correct type, and allow converting from/to range to/from scalar.
+
+	* valops.c, value.h (varying_to_slice, value_slice):  New functions.
+	* eval.c (OP_ARRAY):  Add cast for array element.
+	* expression.h (TERNOP_SLICE, TERNOP_SLICE_COUNT):  New exp_opcodes.
+	* valops.c (chill_varying_type):  Moved function frp, here ...
+	* gdbtypes.c (chill_varying_type), gdbtypes.h: ... to here.
+	* parse.c (length_of_subexp, prefixify_subexp):  Add support
+	for TERNOP_SLICE, TERNOP_SLICE_COUNT.
+	* expprint.c (print_subexp, dump_expression):  Likewise.
+	* eval.c (evaluate_subexp):  Likewise.
+
+	* eval.c (evaluate_subexp case MULTI_SUBSCRIPT):  Don't call
+	value_x_binop on a Chill varying string.
+
+Tue Jan 31 13:51:53 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/monitor.mt,
+	config/pa/{hppabsd.mt,hppahpux.mt,hppaosf.mt,hppapro.mt}: Put
+	depfiles in TDEPFILES not REMOTE_O.
+
+Tue Jan 31 11:14:44 1995  Steve Chamberlain  <sac@splat>
+
+	From nigel@algor.co.uk.
+	* ser-go32.c (dos_close): Don't crash if scb null.
+	(dos_sendbreak): New function.
+	(dos_ops): Point to dos_sendbreak.
+	(dos_info): Calculate COM number correctly.
+
+Tue Jan 31 09:40:11 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (process_xcoff_symbol): Use new variables
+	func_symbol_type and var_symbol_type as type of functions and
+	variables which don't have any stabs associated with them.
+	Reindent most of function.
+	(_initialize_xcoffread): Initialize *_symbol_type.
+
+	* xcoffread.c (read_xcoff_symtab): Reindent most of function.
+	Put C_HIDEXT symbols in the minimal symbols, rather than ignoring
+	them (this part commented out as I didn't quite get it to work).
+	(cs_to_section, find_targ_sec): New functions, to support above code.
+	* xcoffread.c (RECORD_MINIMAL_SYMBOL): Only skip '.' if it is
+	actually present.
+
+Mon Jan 30 17:34:24 1995  Stu Grossman  (grossman@cygnus.com)
+	* sparcl-tdep.c:  Add `sparclite' target for doing serial and udp
+	downloads to SPARClite demo boards.
+
+Sun Jan 29 09:43:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c, remote-pa.c: Remove #if 0'd icache code.  It has had
+	no hope of working as is for a long time (in particular, shebs' 27
+	Jan 95 change confuses the issue further--target_read_memory and
+	xfer_core_file do *not* do the same thing in this context).
+	Revise comment.
+
+Sat Jan 28 13:40:46 1995 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* elfread.c (elf_symtab_read):  Do not test BSF_GLOBAL for
+	procedure linkage table symbols, it is no longer set due to the
+	Jan 6 BFD change in bfd/elfcode.h.
+
+Fri Jan 27 17:08:06 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (use_windows): Clarify comments.
+
+	* convex-tdep.c (xfer_core_file): Comment out.
+	* config/convex/tm-convex.h (XFER_CORE_FILE): Remove.
+	* remote.c, remote-pa.c (remote_fetch_word): Change xfer_core_file
+        references to target_read_memory.
+	* gdbcore.h (xfer_core_file, core_open, core_detach): Remove
+	declarations.
+	* corelow.c (core_open, core_detach): Make static.
+
+	* arm-tdep.c: Make it compile.
+	(exec_file_command, xfer_core_file): Comment out.
+	(arm_print_insn): Remove, now in libopcodes.
+	(skip_prologue): Comment out most of body.
+	(arm_frame_find_saved_regs): Move here from tm-arm.h.
+	(_initialize_arm_tdep): Set tm_print_insn.
+	* config/arm/tm-arm.h: Remove old refs to first_object_file_end.
+	(XFER_CORE_FILE): Remove.
+	(FRAME_FIND_SAVED_REGS): Call arm_frame_find_saved_regs.
+	
+Fri Jan 27 08:48:28 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (CHILL_LIB): Define as in testsuite/Makefile.in.
+
+Thu Jan 26 18:24:41 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* symtab.c (find_pc_line): When subtracting one to get a line
+	number, make sure not to end up with zero.
+
+	* remote-vx.c: Revert all of Kung's changes of 16 Jan.  The
+	problems with those changes were (a) the file didn't compile, (b)
+	they changed memset to bzero--memset is correct, (c) they took out
+	code to deal with boards lacking floating point, (d) who knows
+	what I didn't discover in a quick read.
+
+Thu Jan 26 17:32:54 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* sparcl-tdep.c:  Clean up formatting and indentation.
+
+Thu Jan 26 10:49:59 1995  Steve Chamberlain  <sac@splat>
+
+	* remote-hms.c (hms_ops): Change ref of hr_load_image
+	to gr_load_image.
+	(dcache_flush, dcache_hit, dcache_value, dcache_fetch,
+	dcache_poke, dcache_init):  Deleted.
+	(hms_open, hms_resume, hms_fetch_word, hms_store_word):
+	Use dcache routines provided by remote-util.h
+
+Thu Jan 26 12:08:31 1995  Michael Meissner  <meissner@cygnus.com>
+
+	* configure.in: Add support for powerpc-*-eabi.
+
+	* powerpc/tm-ppc-eabi.h, powerpc/pcc-eabi.mt: New files for
+	PowerPC support.
+
+Wed Jan 25 18:13:14 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* language.h (struct language_defn):  New field c_style_arrays.
+	* language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn), c-lang.c (c_language_defn, cplus_language_defn,
+	asm_language_defn):  Set c_style_arrays to true.
+	* m2-lang.c (m2_language_defn), ch-lang.c (chill_language_defn),
+	f-lang.c (f_language_defn):  Set c_style_arrays to false.
+	* valops.c (value_string):  If c_style_array is not set,
+	allocate string in gdb (not inferior) using allocate_value.
+
+	* value.h (COERCE_ARRAY), valops.c (value_addr, value_arg_coerce):
+	Only call value_coerce_array if current_language->c_style_arrays.
+	* values.c:  Add #include "language.h".  (Needed for COERCE_ARRAY.)
+
+	* valops.c (chill_varying_type):  New predicate.
+	* valops.c (value_cast):  Support assigning a fixed string or array
+	to a variable string/array structure.
+
+	* valarith.c (value_subscripted_rvalue):  Extra parameter lowerbound.
+	Check index>=lowerbound, and then add lowerbound to index here,
+	instead of in caller.  Generalize to arbitrary lval_types.
+	(value_subscript):  Use enhanced value_subscripted_rvalue if
+	c_style_arrays is false (and index is in range).
+
+
+Wed Jan 25 18:13:14 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* eval.c (evaluate_subexp case OP_ARRAY):  Fix calls to memset:
+	TYPE_LENGTH is length in bytes, not bits.
+
+Wed Jan 25 08:19:35 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (proceed): Flush stdout before resuming inferior.
+	* infcmd.c (step_1), annotate.c (annotate_starting):
+	Don't bother to flush here.
+
+Wed Jan 25 01:11:21 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_process_one_debug_symbol): Fix lines garbled
+	by an ill-advised global search and replace.
+
+Mon Jan 23 13:11:46 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	Add support for Chill bitstring literals (e.h. H'FF00').
+	* ch-exp.y (match_bitstring_literal):  Fix for proper endianness.
+	* expprint.c (print_subexp):  Don't call error on OP_BITSTRING,
+	just print B'<unimlemented>'.
+	* gdbtypes.c (create_set_type):  Fix bug in length calculation.
+	* valops.c, value.h (value_bitstring):  New function.
+	* eval.c (evaluate_subexp):  Implement support for OP_BITSTRING.
+
+	* ch-typeprint.c (chill_type_print_base): For TYPE_CODE_FUNC,
+	check that return type is non-void, and print in proper Chill syntax.
+
+Mon Jan 23 12:20:34 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* Makefile.in: Remove references to remote-mon.c.
+	* remote-mon.c: remove. Replaced by rom68k-rom.c.
+	* rom68k-rom.c: Support for Rom68k monitor.
+
+Mon Jan 23 10:50:57 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (CHILL_FOR_TARGET): Update -L argument to point to
+	gcc/ch/runtime not chillrt, since that is where the chill runtime
+	lives now.
+
+Mon Jan 23 00:06:57 1995  Steve Chamberlain  <sac@splat>
+
+	* remote-hms.c (hms_load): Delete.
+	(target_ops): Use hr_load_image.
+
+	* remote-e7000.c, remote-z8k.c, remote-nindy.c (target_ops):
+        Define memory_insert/remove_breakpoint.
+	* xm-go32.h: Remove redundant SIGs.
+	
+Thu Jan 19 20:26:58 1995  Steve Chamberlain  <sac@splat>
+
+	* ser-go32.c: Rewritten by nigel@algor.co.uk.
+
+Fri Jan 20 15:23:55 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* expression.h (OP_LABELED):  New operator, for Chill
+	labeled structre tuples.
+	* ch-exp.y (tuple_element, named_record_element, tuple_elements):
+	New non-terminals, to handle labeled structure tuples.
+	(tuple):  Re-define using tuple_elements.
+	* eval.c (evaluate_labeled_field_init):  New function, to handle
+	initialization of structure fields, possibly using OP_LABELED.
+	(evaluate_subexp):  Use it.
+	* expprint.c (print_subexp case):  For OP_ARRAY, use Chill syntax
+	for Chill.  Handled OP_LABELED.
+	* parse.c (length_of_subexp, prefixify_subexp):  Handle OP_LABELED.
+
+	* eval.c (evaluate_subexp):  Handle Chill Powerset tuples.
+	* valarith.c (value_bit_index):  Just treat bitstring as represented
+	by an array of bytes.  Alignment is handled by compiler. 
+
+Wed Jan 18 19:00:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* h8300-tdep.c (gdb_print_insn_h8300): Fix typo (&info -> info).
+	* sh-tdep.c (gdb_print_insn_sh): Ditto.
+
+Wed Jan 18 11:25:43 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* remote-os9k.c (rombug_open): Fix a bug in exception handling
+	command.
+	* remote-os9k.c (rombug_write_inferior_memory): reset buffer after
+	write.
+
+Tue Jan 17 09:48:38 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* parse.c (_initialize_parse): Improve wording of names of
+	msym_*_symbol_type.
+
+Tue Jan 17 14:00:58 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* config/mips/tm-mips.h (enum mips_fpu_type): New enum.
+	(mips_fpu): Change type to enum mips_fpu_type.
+	(FIX_CALL_DUMMY): Handle mips_fpu == MIPS_FPU_SINGLE.
+	* mips-tdep.c (mips_fpu): Change type to enum mips_fpu_type.
+	Don't initialize.
+	(mips_fpu_string): New static variable.
+	(mips_push_dummy_frame): Handle mips_fpu == MIPS_FPU_SINGLE.
+	(mips_pop_frame): Likewise.
+	(mips_extract_return_value): Likewise.
+	(mips_store_return_value): Likewise.
+	(mips_set_fpu_command): New static function.
+	(mips_show_fpu_command): New static function.
+	(_initialize_mips_tdep): Change handling of set/show mipsfpu.
+
+Tue Jan 17 09:48:38 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* a29k-tdep.c (gdb_print_insn_a29k): Fix typo (&info -> info).
+
+	* parse.c (write_exp_msymbol): Use new variables
+	msym_*_symbol_type as type of msymbol expression.
+	(_initialize_parse): Initialize them.
+
+Mon Jan 16 18:11:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	General cleanup and simplication of disassembler interface.
+	* a29k-pinsn.c, arm-pinsn.c, convex-pinsn.c, gould-pinsn.c,
+        hppa-pinsn.c, i386-pinsn.c, i960-pinsn.c, m68k-pinsn.c,
+        m88k-pinsn.c, mips-pinsn.c, ns32k-pinsn.c, pyr-pinsn.c,
+        rs6000-pinsn.c, sparc-pinsn.c, tahoe-pinsn.c, vax-pinsn.c: Remove.
+	* gould-tdep.c, ns32k-tdep.c, tahoe-tdep.c, vax-tdep.c: New files,
+	had been -pinsn.c files.
+	* Makefile.in (ALLDEPFILES): Remove removed files.
+	(a29k-pinsn.o, arm-pinsn.o, convex-pinsn.o, gould-pinsn.o,
+        hppa-pinsn.o, i386-pinsn.o, i960-pinsn.o, m68k-pinsn.o,
+        m88k-pinsn.o, mips-pinsn.o, ns32k-pinsn.o, pyr-pinsn.o,
+        rs6000-pinsn.o, sparc-pinsn.o, tahoe-pinsn.o, vax-pinsn.o):
+        Remove compile actions.
+	* arm-tdep.o, gould-tdep.o, ns32k-tdep.o, tahoe-tdep.o,
+	vax-tdep.o: Add compile actions.
+	* defs.h (tm_print_insn): New global.
+	* a29k-tdep.c (gdb_print_insn_a29k): New function.
+	(_initialize_a29k_tdep): Rename from _initialize_29k,
+	set tm_print_insn.
+	* alpha-tdep.c (print_insn): Remove.
+	(_initialize_alpha_tdep): Set tm_print_insn.
+	* arm-tdep.c (arm_print_insn): New function, was print_insn
+	in arm-pinsn.c.
+	* convex-tdep.c (convex_print_insn): New function, was print_insn
+	in convex-pinsn.c.
+	* h8300-tdep.c (print_insn): Remove.
+	(gdb_print_insn_h8300): New function.
+	(_initialize_h8300_tdep): New function.
+	* h8500-tdep.c (print_insn): Remove.
+	(_initialize_h8500_tdep): New function.
+	* hppa-tdep.c (_initialize_hppa_tdep): Set tm_print_insn.
+	* i386-tdep.c (_initialize_i386_tdep): New function.
+	* i960-tdep.c (mem, next_insn): New functions, were in
+	i960-pinsn.c.
+	(_initialize_i960_tdep): Set tm_print_insn.
+	* m68k-tdep.c (_initialize_m68k_tdep): New function.
+	* m88k-tdep.c (_initialize_m88k_tdep): New function.
+	* mips-tdep.c (gdb_print_insn_mips): New function.
+	(_initialize_mips_tdep): Set tm_print_insn.
+	* pyr-tdep.c (pyr_print_insn): New function, was print_insn
+	in pyr-pinsn.c.
+	* rs6000-tdep.c (_initialize_rs6000_tdep): New function.
+	* sh-tdep.c (print_insn): Remove.
+	(gdb_print_insn_sh): New function.
+	(_initialize_sh_tdep): Set tm_print_insn.
+	* sparc-tdep.c (_initialize_sparc_tdep): New function.
+	* w65-tdep.c (print_insn): Remove.
+	(_initialize_w65_tdep): New function.
+	* z8k-tdep.c (print_insn): Remove.
+	(gdb_print_insn_z8k): New function.
+	(_initialize_z8k_tdep): Set tm_print_insn.
+	* printcmd.c (print_insn): New function, generic disassembler.
+	* config/*/*.mt (TDEPFILES): Remove refs to *-pinsn.o.
+
+Mon Jan 16 15:43:29 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* Makefile.in: add new files remote-vx29k.c, config/a29k/tm-vx29k.h,
+	and config/a29k/vx29k.mt.
+	* configure.in: add new configuration a29k-*-vxworks.
+	* remote-vx29k.c: new file merged from WRS.
+	* remote-vx.c: merge changes from WRS.
+	* config/a29k/vx29k.mt: new file for new configuration.
+	* config/a29k/tm-vx29k.h: new header file for newconfiguration.
+
+Sun Jan 15 14:36:19 1995  Steve Chamberlain  <sac@splat>
+
+	* breakpoint.h (disable_breakpoint, enable_breakpoint):
+	New declarations.
+	(enum bpdisp): Change name of 'delete' member to 'del'.
+	(struct bpstat): Changed name to 'bpstats'.
+	* breakpoint.c (disable_breakpoint, enable_breakpoint,
+	breakpoint_chain): Made globally visible.
+	(bpstat_stop_status): Use new name for bpstat.
+	(break_command_1, watch_command_1, catch_command_1,
+	breakpoint_auto_delete, denable_delete_breakpoint): Use 'del'
+	instead of 'delete'.
+	(set_breakpoint_sal): New function.
+	* defs.h (registers_changed_hook): New declaration.
+	* infcmd.c (run_stack_dummy): 'delete' is now 'del'.
+	* inflow.c (new_tty): Treat WIN32 in same way as __GO32__	
+	* main.c (main): Don't scan options when in WIN32 and exit
+	without entering main loop.
+	* m2-exp.y (m2_elx): Member 'class' is now 'aclass'.
+	* symtab.h (struct symbol, struct partial_symbol): Changed name of
+	member 'class' to 'aclass'. 
+	(SYMBOL_CLASS, PSYMBOL_CLASS): Reflect change.
+	* top.c (registers_changed_hook): New definition.
+	* utils.c (quit, notice_quit, initialize_utils): Treate WIN32
+	in same way as __GO32__.
+	* value.h (c_typedef_print): Rename 'new' argument.
+
+	* w65-tdep.c, config/tm-w65.h, config/w65.mt: New files.
+	* configure.in: Suppprt for w65,
+
+
+Sat Jan 14 11:18:11 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* infcmd.c (signal_command): For "signal 0", pass (CORE_ADDR)-1,
+	not stop_pc, to proceed.
+
+	* eval.c (evaluate_subexp): Clear expect_type except for C++ and CHILL.
+
+Fri Jan 13 17:52:57 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* infcmd.c (signal_command): Accept "signal 0"; the change to not
+	accept it was accidental.  "handle 0" and "info signal 0" remain
+	illegal, though.
+
+Fri Jan 13 15:19:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (all): Don't make libgdb-files.
+	(libgdb): New action, makes libgdb-files.
+
+Thu Jan 12 21:23:25 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* stabsread.c (read_enum_type):  When pending enum symbols are
+	put into the enum type, they must be inserted in "backwards
+	order, in case we've overflowed a struct pending buffer.
+
+
+Thu Jan 12 09:33:24 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Add note about SPARCworks cc release 3.0 and higher.
+
+	Add procfs support for Alpha OSF/1-2.x.
+	* config/alpha/nm-osf.h:  Renamed from nm-alpha.h, generic
+	OSF/1 native support.
+	* config/alpha/alpha-osf1.mh (NAT_FILE):  Changed accordingly.
+	(MUNCH_DEFINE):  Removed.
+	* config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h:  New files
+	for procfs support.
+	* configure.in (alpha-dec-osf*):  Use alpha-osf2.mh for OSF/1
+	release 2.x and higher, else alpha-osf1.mh, as the procfs support
+	in release 1.x is incomplete.
+	* Makefile.in (ALLCONFIG):  Add config/alpha/alpha-osf2.mh.
+	* alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset,
+	fill_fpgregset):  New routines for procfs support.
+	* inftarg.c (_initialize_inftarg):  Don't add ptrace support
+	if we have an optional procfs and /proc is accessible.
+	* procfs.c:  Include sys/fault.h and sys/syscall.h before
+	including sys/procfs.h.
+	(unconditionally_kill_inferior):  If PROCFS_NEED_PIOCSSIG_FOR_KILL
+	is defined, additionally perform a PIOCSSIG to really terminate
+	the inferior.
+	(create_procinfo):  Always return a result.
+	(create_procinfo, do_attach):  Don't trace T_IFAULT faults if
+	PROCFS_DONT_TRACE_IFAULT is defined.
+	(procfs_init_inferior):  Use START_INFERIOR_TRAPS_EXPECTED as
+	argument to startup_inferior if it is defined.
+	(proc_set_exec_trap):  If PIOCSSPCACT is defined, use it instead
+	of tracing exits from exec system calls. Needed for the user level
+	loader under Alpha OSF/1.
+	(do_detach):  Clear any pending signal if we want to detach from
+	a process without a signal.
+	(set_proc_siginfo):  If PROCFS_DONT_PIOCSSIG_CURSIG is defined,
+	don't issue a PIOCSSIG if pr_cursig already contains the signal we
+	intend to set.
+	(info_proc_signals):  If PROCFS_SIGPEND_OFFSET is defined, the
+	pending signals are numbered from 1 instead of 0.
+	(info_proc_mappings):  Increase size of output format for addresses
+	if BFD_HOST_64_BIT is defined.
+	(procfs_stop):  Renamed from child_stop.
+	(_initialize_procfs):  Don't add procfs support if we have an
+	optional procfs and /proc is not accessible.
+
+
+Wed Jan 11 17:53:26 1995  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* array-rom.c: Add support for most commands.
+	
+	* monitor.c: Add GDB remote protocol for the hybrid environment on
+	the Array board. 
+
+Wed Jan 11 00:44:01 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* command.c (show_user_1): Use print_command_line to show a user
+	defined command (including control structures).
+
+	* top.c (init_main): Change documentation for user defined
+	commands to indicate they may accept up to ten arguments.
+
+Tue Jan 10 16:22:41 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* mips-tdep.c (mips_skip_prologue): Accept or as well as addu for
+	`move $s8, $sp' instruction.
+
+Sun Jan  8 12:45:34 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* target.c, target.h (target_signal_from_command): New function.
+	* infrun.c (handle_command, signals_info), infcmd.c
+	(signal_command): Use it.
+	* infrun.c, infcmd.c: Update docstrings for these commands.
+
+	* target.h (enum target_signal), target.c (signals), target.c
+	(target_signal_from_host, target_signal_to_host): Add
+	TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
+	* config/tm-lynx.h: Define signal numbers for realtime events.
+
+Sat Jan  7 07:23:53 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (process_one_symbol):  Handle N_FUN symbols
+	for Sun acc 3.0 under SunOS4.
+
+	Changes to improve handling of runtime common symbols
+	under SunOS4.
+	* minsyms.c (get_symbol_leading_char):  New routine to determine
+	the leading symbol character for an objfile.
+	(prim_record_minimal_symbol_and_info, install_minimal_symbols):
+	Use it.
+	* objfiles.h (rt_common_objfile):  New global, points to objfile
+	containing the runtime common minimal symbols.
+	* objfiles.c (free_objfile):  Mark rt_common_objfile as
+	unallocated before freeing it.
+	* solib.c (allocate_rt_common_objfile):  New routine to allocate
+	an objfile for the runtime common minimal symbols.
+	(solib_add_common_symbols):  Allocate an objfile for the runtime
+	common symbols if necessary and put common symbols into it.
+	Clean up code and comments.
+	(solib_add, special_symbol_handling):  Cleanup comments regarding
+	runtime common symbols.
+	* stabsread.c (scan_file_globals_1):  New routine, contains
+	old scan_file_globals code. Checks if there are any unresolved
+	global symbols before starting the expensive minimal symbol table
+	search.
+	(scan_file_globals):  Now calls scan_file_globals_1 for the passed
+	objfile and eventually for the runtime common objfile. Complains
+	about any unresolved global symbols and removes them from the
+	global symbol chain to avoid dangling pointers into the symbol
+	table if the symbol table is reread.
+
+Thu Jan  5 17:38:29 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (install_only uninstall):  Indent for clarity.
+
+	* core.c (dis_asm_read_memory):  Add call to
+	dis_asm_read_memory_hook to provide alternate way for disassembler
+	to read memory.
+
+	* defs.h:  Protect from multiple inclusion.  Add decl for
+	dis_asm_read_memory_hook.
+
+	* top.c:  Make window startup be the default.
+	* Add dis_asm_read_memory_hook.
+
+
+Thu Jan  5 01:16:40 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* stabsread.c (define_symbol): Handle `a' symbol type used for
+	reference parameter passed in a register.
+
+
+Wed Jan  4 12:27:29 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* defs.h: move include tm.h up, so that the type LONGEST can
+	also based on the target requirement to determine. In this case
+	target mips64.
+
+	* remote-os9k.c (rombug_open): catch exception e in rombug.
+	* remote-os9k.c (rombug_wait): print message before register display
+	from rombug.
+
+Wed Jan  4 09:18:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* top.c (locate_arg): Call strchr not index.
+
+Tue Jan  3 16:52:03 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.y (literal):  Recognize NULL.
+	(tuple):  Parse simple unlabelled tuples.
+	* eval.c (evaluate_subexp case OP_ARRAY):  Use expect_type to
+	evaluate brace-initializer-expressions depending on context.
+	(evaluate_subexp case UNOP_CAST):  Pass the target type as
+	expected type when evaluating the expression.
+
+	* ch-typeprint.c (chill_type_print_base):  Get names of PTR and
+	BOOL from TYPE_NAME.
+	* ch-valprint.c (chill_print_type_scalar):  New function, to handle
+	TYPE_CODE_RANGE better than print_type_scalar does.
+	(chill_val_print_array_elements):  Use above new function.
+
+Mon Jan  2 15:02:51 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-udi.c (udi_load): Tell symbol_file_add that the
+	program being loaded is the main program.
+
+For older changes see ChangeLog-94
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-96 b/gdb/ChangeLog-96
new file mode 100644
index 0000000..760b425
--- /dev/null
+++ b/gdb/ChangeLog-96
@@ -0,0 +1,5116 @@
+Tue Dec 31 15:19:32 1996  Geoffrey Noer  <noer@cygnus.com>
+
+        * config/mn10300/tm-mn10300.h: more small register fixes
+
+Tue Dec 31 06:51:43 1996  Mark Alexander  <marka@cygnus.com>
+
+	* config/i386/xm-windows.h: Undo previous change to SIGTRAP
+	and SIGQUIT values; it messed up non-MIPS targets.
+	* config/mips/tm-mips.h: Undefine BREAKPOINT, replace
+	with separate LITTLE_BREAKPOINT and BIG_BREAKPOINT definitions;
+	this fixes problem with setting breakpoints in little-endian
+	programs in the simulator.
+
+Mon Dec 30 00:14:06 1996  Doug Evans  <dje@seba.cygnus.com>
+
+	* remote-sim.c (gdbsim_open_p): New static local.
+	(gdbsim_open): Call unpush_target if sim open.  Set gdbsim_open_p.
+	(gdbsim_close): Only call sim_close if sim open.  Reset gdbsim_open_p.
+
+Sun Dec 29 09:15:03 1996  Mark Alexander  <marka@cygnus.com>
+
+	* config/i386/xm-windows.h: Make SIGTRAP and SIGQUIT consistent
+	with sim/mips/support.h.
+
+Fri Dec 27 14:53:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* v850-tdep.c (struct pifsr): Add cur_frameoffset field.
+	(v850_scan_prologue): Add debug code #ifdef'ed DEBUG.  Support new
+	compiler prologues using register save functions and short store
+	instructions.  Add support for functions with large stack frames.
+
+	* config/v850/tm-vm850.h ({R0,R1,R12,EP}_REGNUMS): New register
+	number defintiions for r0, r1, r12, ep.
+	(SAVE{1,2,3}_{START,END}_REGNUM): Register number definitions for
+	the 3 sets of saved registers.
+
+Thu Dec 26 19:56:55 1996  Mark Alexander  <marka@cygnus.com>
+
+	* valprint.c (print_longest): Don't lose upper bits
+	of 64-bit values on Windows.
+	* config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined,
+	undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will
+	be printed without loss of upper bits.
+
+Thu Dec 26 15:15:21 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/sparc/tm-sparclet.h: make registers ASR15, ASR19 invisible
+          (they're not useful, you can't change, write or even read them)
+	
+Thu Dec 26 15:20:48 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/pa/hppahpux.mh (TERMCAP): Always link to libc before
+	libcurses, to avoid picking up broken select() from libcurses
+	on some versions of HPUX.
+
+Thu Dec 26 15:14:41 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+	
+	* sparclet-rom.c: Remove includes of Unix system files.
+	  Add function "sparclet_supply_register" so that parse_register_dump
+	  will not seg-fault by calling a null function pointer.
+	  Remove XMODEM support (unfinished work?).
+	  Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans.
+	  Add fill command.
+	  Remove colon from getreg.resp_delim so PSR register will work.
+	  Remove pointer to sparclet_load (downloading SREC's doesn't work).
+	  Null out local register names for %g0, all %cc and all %asr regs,
+	  since the monitor can't report them.  Will return zero instead.
+	* sparclet-stub.c: New -- remote protocol support for sparclet CPU.
+	* config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES:
+	  Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs.
+	  Adjust NUM_REGS and REGISTER_BYTES accordingly
+
+Tue Dec 24 10:27:37 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* remote-e7000.c (want_h8300h, want_nopc_h8300h): Renamed
+	from want and want_nopc.
+	(want_h8300s, want_nopc_h8300s): New variables for H8/S register
+	lists.
+	(e7000_fetch_registers): Use H8/300H or H8/S register list string
+	as needed.
+	(e7000_wait): Likewise.
+
+Mon Dec 23 02:25:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (mips_find_saved_regs):  If a frame has been
+	interrupted by a signal, figure out whether the registers that
+	the proc_desc claims are saved have been saved yet.
+	(mips_push_dummy_frame):  Write dummy frame register after all
+	registers have been saved in the dummy frame. Update comments
+	to reflect the fact that we are now using an AT_ENTRY_POINT
+	call dummy.
+
+Sun Dec 22 15:52:25 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c (d10v_skip_prologue): PR11287.  Fix problem where
+	some breakpoints weren't being set.
+
+Sat Dec 21 12:57:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-mips.h (PC_IN_CALL_DUMMY):  Removed, the default
+	definition in inferior.h is sufficient.
+	* mips-tdep.c (mips_pc_in_call_dummy):  Ditto.
+	(mips_push_arguments):  Make sure that the stack is aligned to a
+	multiple of 8 after the arguments are pushed.
+	Structures are always passed by value in the old ABI.
+	Adjust argument register value on big endian targets when passing
+	a value whose length is less than the register size.
+	Write stack arguments with a single write_memory call.
+	(mips_pop_frame):  Use frame_saved_regs instead of proc_desc to
+	decide which registers have to be restored.
+
+	* irix5-nat.c (fill_gregset):  Sign extend registers before
+	filling in the gregset structure.
+
+Fri Dec 20 11:06:03 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* mswin/genmakes:  Don't define _DEBUG.  This breaks wingdb.
+
+Thu Dec 19 19:42:44 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* v850-tdep.c (v850_scan_prologue): Deal with -mep shorting
+	register saves by using the ep register.
+
+Thu Dec 19 15:57:16 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* m32r-tdep.c (m32r_frame_find_saved_regs): Fix thinko in arg def.
+
+Thu Dec 19 09:38:56 1996  Mark Alexander  <marka@cygnus.com>
+
+	* values.c (unpack_double): Make it compile with MSVC++ 2.x.
+	* remote-mips.c (S_IROTH): Define if not defined by stat.h, e.g.
+	when using MSVC++.
+	(common_open): Fix help string.
+
+Wed Dec 18 23:01:32 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Use NewFolderRecursive for installation.
+
+Sat Dec 14 20:50:01 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Handle floating point args.
+	* config/mips/tm-mips.h (FIX_CALL_DUMMY): Define to set up $25
+	correctly for PIC on Irix 5.
+
+Sat Dec 14 09:52:30 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* i386-tdep.c (i386_frame_find_saved_regs):  Handle zero return
+	from get_pc_function_start gracefully.
+
+Sat Dec 14 00:43:57 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-exp.y (qualified_name):  Replace explicit check for valid
+	destructor name with call to destructor_name_p.
+
+	* c-lang.h, c-typeprint.c (cp_type_print_method_args):  Removed,
+	no longer needed.
+
+	* c-typeprint.c (c_type_print_varspec_prefix, c_type_print_base):
+	Replace remaining fprintf_unfiltered calls with their filtered variant.
+	(c_type_print_base):  Do not print return type for destructors from
+	template classes.
+	Replace cp_type_print_method_args with cplus_demangle call to get
+	consistent type output for stubbed and unstubbed methods.
+
+	* cp-valprint.c (cp_print_class_method):  Replace
+	cp_type_print_method_args with cplus_demangle call to get consistent
+	type output for stubbed and unstubbed methods.
+
+	* gdbtypes.c, gdbtypes.h (get_destructor_fn_field):  New function
+	to find the destructor field indices for a type.
+
+	* gdbtypes.h (struct type):  Clarify comments for vptr_basetype
+	and arg_types fields.
+	(struct fn_field):  Remove args field, no longer used.
+
+	* symtab.c (decode_line_1), valops.c (value_struct_elt,
+	check_field_in):  Use get_destructor_fn_field to find the destructor
+	field indices instead of assuming that the compiler passes the member
+	function fields in a specific order.
+
+	* symtab.c (find_methods):  Pass NULL instead of SYMBOL_BLOCK_VALUE
+	to lookup_symbol.
+	(list_symbol):  Replace cp_type_print_method_args with cplus_demangle
+	call in zapped out code and explain why this code is zapped out.
+
+Thu Dec 12 13:29:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/ppc{,le}-sim.mt (SIM): Add the simulator common
+	library ../sim/common/libcommon.a.
+
+Wed Dec 11 11:15:08 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* monitor.c (monitor_load): Add support for load address argument.
+	* dsrec.c: #include <time.h>.
+	(load_srec): New argument load_offset.  Print download stats.
+	* srec.h (load_srec): Update prototype.
+	* sh3-rom.c (sh3_load): Update call to load_srec.
+
+Mon Dec  9 17:34:05 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/mn10300/tm-mn10300.h: more small register fixes
+	* mn10300-tdep.c: filled in from another target
+
+Mon Dec  9 17:12:19 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* monitor.c (monitor_insert_breakpoint): Handle bi-endian machines.
+
+Mon Dec  9 15:58:51 1996  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips/tm-mips.h: Get rid of call-dummy code.
+	Minor changes to make pre-ANSI compilers happy.
+	* mips-tdep.c: Minor changes to make pre-ANSI compilers happy.
+	(mips_push_arguments): Rewrite to partially support EABI.
+	(mips_pc_in_call_dummy): New function.
+	* infcmd.c: Include symfile.h to get prototype of entry_point_address,
+	which fixes 64-bit sign extension bug on MIPS.
+
+Mon Dec  9 00:14:49 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/mn10300/tm-mn10300.h: fix register names
+	* mn10300-tdep.c: new skeleton tdep for mn10300
+
+Sun Dec  8 18:02:57 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* remote-sim.h: Update some comments.
+	* remote-sim.c (gdb_os_error): New function.
+	(init_callbacks): Fix initializing of gdb_callback.  Add gdb_os_error.
+	(gdb_os_printf_filtered): Use gdb_stdout, not stdout.
+
+Sun Dec  8 00:36:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* irix5-nat.c (supply_gregset, fill_gregset):  Handle gregsets
+	from O32 and N32 ABI.
+	(xfer_link_map_member):  Work around problem with alignments
+	in struct obj when compiling GDB under N32 ABI.
+
+Thu Dec  5 23:30:44 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* d10v-tdep.c: Add support for examination and interpretation
+	of instruction trace buffer.
+	(trace, untrace, info trace, tdisassemble): New commands.
+
+Thu Dec  5 14:06:23 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER): Undef.
+	(TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(BREAKPOINT): Undef.
+	({BIG,LITTLE}_BREAKPOINT): Define.
+	(TM_PRINT_INSN_MACH): Redefine for sparclet.
+
+Wed Dec  4 16:34:05 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/mn10300/mn10300.mt, config/mn10300/tm-mn10300.h: New.
+
+Tue Dec  3 13:02:08 1996  Fred Fish  <fnf@ninemoons.com>
+
+	* infptrace.c (store_inferior_registers): Move some common code out
+	to store_register, like fetch_inferior_registers & fetch_register.
+	(store_register): New function, from store_inferior_registers.
+	(fetch_inferior_registers, fetch_register): Minor code tweaks to
+	make {fetch,store}_inferior_registers and {fetch,store}_register
+	routines as similar in structure as possible.
+	(fetch_inferior_registers, store_inferior_registers): Eliminate
+	local variable numregs and just use ARCH_NUM_REGS directly.
+	
+Tue Dec  3 11:38:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* blockframe.c: add macro USE_GENERIC_DUMMY_FRAMES to enable/disable
+	  code for generic call_dummy frames.
+	* config/h8300/tm-h8300.h: turn on USE_GENERIC_DUMMY_FRAMES
+	* config/m32r/tm-m32r.h: Ditto.
+	* config/sh/tm-sh.h: Ditto.
+	* config/v850/tm-v850.h: Ditto.
+
+Sun Dec  1 00:41:47 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* vax-tdep.c (vax_print_insn, print_insn_arg):  Use info functions
+	for printing. From Valeriy Ushakov <uwe@ptc.spbu.ru>.
+
+Sun Dec  1 00:40:46 1996  Geoffrey Noer  <noer@cygnus.com>
+
+        * configure.tgt: Add new mn10300 entry.
+
+Sun Dec  1 00:18:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Add support for Irix 6.2 native O32 and N32 ABI.
+
+	* config.in, configure.in, configure:  Check for <objlist.h>.
+	* configure.tgt:  Handle mips*-sgi-irix6* like irix5 for now.
+
+	* cp-valprint.c (cp_print_value_fields):  Use SYMBOL_VALUE_ADDRESS
+	instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
+
+	* dwarf2read.c:  Turn warnings and recoverable errors into complaints,
+	add new complaints where appropriate.
+	gcc -Wall cleanup.
+	(struct line_head):  Change line_base from char to int to avoid
+	problems with compilers whose plain char is represented by an
+	unsigned char.
+	(struct partial_die_info):  Add is_declaration field.
+	(dwarf2_tmp_obstack):  New obstack for allocating temporary storage
+	used during symbol reading.
+	(cu_header_offset):  New variable for resolving relative reference
+	dies.
+	(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
+	New interface variables for decode_locdesc.
+	(struct dwarf2_pinfo):  New structure for communication between
+	psymtab and symtab reading, passed via pst->read_symtab_private.
+	(dwarf2_has_info, dwarf2_build_psymtabs):  Accept objects files
+	without line number sections.
+	(dwarf2_build_psymtabs_hard):  Initialize temporary obstack
+	for symbol reading.
+	Allocate and initialize pst->read_symtab_private.
+	Relocate pst->textlow and pst->texthigh with baseaddr.
+	(scan_partial_symbols):  Do not add DW_AT_declaration symbols
+	to the partial symbol table.
+	Add file scope enumerator symbols to the partial symbol table.
+	Fix typo in highpc computation.
+	If we didn't find a lowpc, set it to highpc to avoid complaints
+	from `maint check.
+	(add_partial_symbol):  Relocate symbol values with baseaddr.
+	Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
+	minimal symbol table.
+        Obtain symbol values for DW_TAG_variable symbols from the location
+	descriptor, skip symbols with missing location desciptors.
+	Skip symbols for aggregate types without children.
+	Handle enumerator symbols.
+	(dwarf2_psymtab_to_symtab):  Issue symbol reading message if verbose.
+	(psymtab_to_symtab_1):  Set local variables from
+	pst->read_symtab_private, set cu_header_offset and baseaddr.
+	Initialize temporary obstack for symbol reading, initialize
+	buildsym and add a cleanup to really_free_pendings.
+	Relocate highpc with baseaddr when calling end_symtab.
+	If the compilation is from a C file generated by language
+	preprocessors, do not set the symtab language if it was already
+	deduced by start_subfile.
+	Removed verbose sorting symbol table message.
+	(process_die):  Handle DW_TAG_ptr_to_member_type and
+	DW_TAG_reference_type.
+	Use read_subroutine_type to get the function type for
+	DW_TAG_subprogram before calling read_func_scope.
+	(read_file_scope):  Initialize file name to <unknown>, start_subfile
+	expects a non-NULL name.
+	If we didn't find a lowpc, set it to highpc to avoid complaints
+	from finish_symbol.
+	Relocate lowpc and highpc with baseaddr.
+	Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
+	Zero out ftypes for each new compilation unit (may be different
+	language or different objfile).
+	Accept compilation units without line number information, pass
+	comp_dir to decode_lines.
+	(read_func_scope):  Initialize function name to <unknown> to avoid
+	core dumps when DW_AT_name is missing.
+	Relocate lowpc and highpc with baseaddr.
+	Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
+	Pass function type to new_symbol.
+	(read_lexical_block_scope):  Relocate lowpc and highpc with baseaddr.
+	(read_structure_scope):  Set TYPE_TAG_NAME, not TYPE_NAME.
+	Handle DW_TAG_class_type.
+	Copy fields to type_obstack, release temporary storage for fields.
+	Don't add symbol if die is a stub die and has no children.
+	Handle C++ static member fields.
+	(read_enumeration):  Set TYPE_TAG_NAME, not TYPE_NAME.
+	Copy fields to type_obstack, release temporary storage for fields.
+	Let new_symbol handle the symbol creation for enumerators
+	instead of handcrafting a symbol.
+	Determine signedness of enum type from enumerators.
+	(dwarf_read_array_type):  Handle variable length arrays.
+	Use lookup_pointer_type instead of handcrafting a type.
+	Create array type only if a DW_TAG_subrange_type was found.
+	(read_tag_pointer_type, read_tag_reference_type):
+	Use lookup_pointer_type and lookup_reference_type instead
+	of handcrafting a type.
+	(read_tag_ptr_to_member_type):  New function to handle 
+	DW_TAG_ptr_to_member_type.
+	(read_subroutine_type):  Handle parameter dies.
+	Use lookup_function_type instead of handcrafting a type.
+	(read_typedef):  Allocate a TYPE_CODE_TYPEDEF type for the typedef.
+	(read_base_type):  If the type has a name, use init_type to create
+	a new type instead of second guessing a fundamental type.
+	(read_comp_unit):  Reset die reference table before building
+	a new one.
+	(dwarf2_read_section):  Read section contents into psymbol_obstack.
+	(dwarf2_read_abbrevs):  Handle unterminated abbreviations
+	for a compile unit gracefully.
+	(read_partial_die):  Zero partial die before reading its info.
+	Handle DW_AT_declaration.
+	Fix typo in handling of DW_FORM_block4.
+	(read_full_die):  Fix typo in handling of DW_FORM_block4.
+	(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
+	New routines to get signed values from a buffer.
+	(read_n_bytes, read_string):  Allocate storage from the temporary
+	obstack. If the host char size permits it, return pointer
+	to buffer instead of allocating storage.
+	(set_cu_language):  Handle DW_LANG_Mips_Assembler.
+	(dwarf_attr):  Return NULL if reference die for DW_AT_specification
+	or DW_AT_abstract_origin die is not found.
+	(record_minimal_symbol):  Removed, replaced with a direct call to
+	prim_record_minimal_symbol, it now handles saving the string itself.
+	(convert_locdesc):  Removed, partial symtab reading now uses
+	decode_locdesc.
+	(dwarf_attr):  Use dwarf2_get_ref_die_offset to get the absolute
+	offset for the die reference.
+	(dwarf_decode_lines):  Complain if the line section info is missing.
+	Use read_1_signed_byte to extract lh.line_base to avoid
+        problems with compilers whose plain char is represented by an
+        unsigned char.
+	Add cleanups for allocated temporary storage.
+	Start a subfile for the first file in the state machine.
+	Fix off by one problem with dirs.dirs access.
+	Use comp_dir when directory index is 0.
+	Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
+	(dwarf2_start_subfile):  Try to keep line numbers from identical
+	absolute and relative file names in a common subfile.
+	(new_symbol):  Allocate symbol and symbol name on the symbol_obstack.
+	Set SYMBOL_LINE from DW_AT_decl_line if present.
+	Set SYMBOL_TYPE from passed type if not NULL.
+	Change DW_TAG_variable symbol types with missing type entries
+	to a sensible type.
+	Handle optimized_out, offreg and islocal storage classes.
+	Add external symbols with type information whose address isn't
+	known as LOC_UNRESOLVED symbols.
+	Synthesize typedefs for C++ classes, structs, unions and enumerations.
+	Handle DW_TAG_enumerator symbols, complain for unrecognized
+	symbol tags.
+	(die_type):  A missing DW_AT_type represents a void type.
+	Use dwarf2_get_ref_die_offset to get the absolute offset for
+	the die reference.
+	(die_containing_type):  New function to build type from
+	DW_AT_containing_type attribut.
+	(read_type_die):  Handle DW_TAG_ptr_to_member_type.
+	Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
+	(dwarf_base_type):  Fix typo with creation of FT_UNSIGNED_SHORT
+	fundamental type.
+	(create_name):  Removed, symbol name allocation is now done
+	in new_symbol.
+	(dump_die):  Use print_address_numeric to print a CORE_ADDR.
+	(dwarf2_empty_die_ref_table):  New function to clear the die
+	reference table.
+	(dwarf2_get_ref_die_offset):  New function to get the absolute
+	die offset from a die reference attribute.
+	(decode_locdesc):  Complete rewrite using a stack, code mostly
+	borrowed from dwarfread.c:locval.
+	(dwarf_alloc_type):  Removed, replaced by direct calls to alloc_type.
+	(dwarf_alloc_block):  Allocate block on temporary obstack.
+
+	* elfread.c (elf_symtab_read):  When handling Irix dynamic symbols,
+	skip section name symbols and relocate all others.
+	(elf_symfile_read):  Build dwarf2 psymtab even if offset is non-zero.
+
+	* irix5-nat.c (fetch_core_registers):  Handle core_reg_sect
+	from N32 executables. Call registers_fetched after extracting
+	the registers.
+	(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR):  New
+	definitions to enable support of O32 and N32 format objlists.
+	(struct so_list):  New members offset, so_name and lmstart to
+	eliminate dependencies from the objlist format used.
+	(solib_map_sections, symbol_add_stub, solib_add,
+	info_sharedlibrary_command, solib_address, clear_solib):  Use
+	so_name and LM_OFFSET.
+	(first_link_map_member):  Rewrite to enable support of O32 and N32
+	format objlists.
+	(next_link_map_member, xfer_link_map_member):  New functions to
+	support O32 and N32 format objlists.
+	(find_solib):  Use first_link_map_member, next_link_map_member and
+	xfer_link_map_member.
+	(solib_create_inferior_hook):  Use TARGET_SIGNAL_* instead of
+	host signal numbers.
+
+	* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
+	Pass CORE_ADDR variant to add_psymbol_to_list.
+
+	* mips-tdep.c (heuristic_proc_desc):  Stop examining the prologue
+	if we encounter a positive stack adjustment. Handle `move $30,$sp'.
+	Handle `sd reg,offset($sp)' for 32 bit ABIs.
+
+	* symmisc.c (dump_msymbols, print_partial_symbols):  Use
+	print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
+	(dump_symtab):  Print compilation directory if it is not NULL.
+
+	* valops.c (search_struct_field, value_struct_elt_for_reference):
+	Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
+	address of a static member.
+
+Thu Nov 28 00:46:24 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* vax-tdep.c (vax_print_insn):  Made static, modified to take
+	disassemble_info as parameter.
+	(_initialize_vax_tdep):  New function to initialize tm_print_insn
+	to vax_print_insn.
+
+Wed Nov 27 11:29:06 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* blockframe.c: Remove old-style CALL_DUMMY code.
+	* h8300-tdep.c, config/h8300/tm-h8300.h: Ditto.
+	* m32r-tdep.c, config/m32r/tm-m32r.h: Ditto.
+	* sh-tdep.c, config/sh/tm-sh.h: Ditto.
+	* v850-tdep.c, config/v850/tm-v850.h: Ditto.
+	
+Wed Nov 27 10:32:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
+	* blockframe.c: Add target-independant support for managing
+			CALL_DUMMY frames on the host side.
+	* frame.h:      Declarations for generic CALL_DUMMY frame support.
+	* h8300-tdep.c: Add target function calls using generic frame support.
+	* config/h8300/tm-h8300.h: config for generic target function calls.
+	* m32r-tdep.c:  Add target function calls using generic frame support.
+	* config/m32r/tm-m32r.h:   config for generic target function calls.
+	* sh-tdep.c:    Add target function calls using generic frame support.
+	* config/sh/tm-sh.h:       config for generic target function calls.
+	* v850-tdep.c:  Add target function calls using generic frame support.
+	* config/v850/tm-v850.h:   config for generic target function calls.
+	* valops.c:     ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
+			done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
+
+Tue Nov 26 19:21:35 1996  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips/tm-mips.h (ADDR_BITS_REMOVE, TARGET_READ_SP): Define.
+	(mips_addr_bits_remove): Declare.
+	* mips-tdep.c (mips_push_dummy_frame): Fix heuristic-fence-post
+	errors when hitting breakpoints during inferior function calls
+	in 64-bit programs.
+	(fix_sign_extension): Make public, rename to mips_addr_bits_remove.
+	* utils.c (paddr_nz, preg_nz): New functions, similar to 
+	paddr and preg but don't print leading zeroes.
+	* defs.h (paddr_nz, preg_nz): Declare.
+	* remote-mips.c: Use paddr_nz instead of paddr throughout
+	to reduce packet size.
+	(pmon_end_download): Improve timeout error handling.
+
+Tue Nov 26 17:21:37 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure: Rebuild with autoconf 2.12.
+
+Mon Nov 25 13:17:16 1996  Fred Fish  <fnf@ninemoons.com>
+
+	From: Paul Eggert <eggert@twinsun.com>
+	* remote-bug.c (wait_strings): Avoid creating a trigraph.
+
+Fri Nov 22 15:55:22 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* valops.c (value_at, value_fetch_lazy): Put in D10V call 
+	to fix up address pointers.
+	* values.c (value_from_longest): Removed previous d10v changes.
+	* config/d10v/tm-d10v.h (TARGET_PTR_BIT): Change to 4 bytes.
+	
+Fri Nov 22 10:06:19 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/nm-i386v4.h (LOSING_POLL):  Define, needed for
+	Unixware 1.1.2.
+
+Thu Nov 21 19:13:58 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN.
+	(common_breakpoint): Use paddr instead of %x to print 64-bit values.
+	(heuristic_proc_desc): Add tests for 64-bit instructions.
+	(init_extra_frame_info, mips_push_arguments): Recognize additional
+	registers for EABI.
+	* remote-mips.c: Extend DDB target to allow TFTP downloads.
+	* config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS):
+	Define.
+
+Wed Nov 20 19:09:16 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* infcmd.c (do_registers_info): Call val_print with the
+	virtual buf instead of the raw buf.  Needed for REGISTER_CONVERT 
+	to work with non-floating point regs.
+
+	* d10v-tdep.c (d10v_skip_prologue): If we have line debugging 
+	information, then the end of the prologue should the first 
+	assembly instruction of the first source line.
+	
+	* values.c (value_from_longest): Put in D10V call to 
+	fix up address pointers.
+
+	* config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified.
+	(REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM.
+	(REGISTER_CONVERTIBLE): Make PC and SP convertible.
+	(REGISTER_CONVERT_TO_VIRTUAL): Define.
+	(REGISTER_CONVERT_TO_RAW): Define.
+	(D10V_MAKE_DADDR): Define.
+	(D10V_MAKE_IADDR): Define.
+
+Wed Nov 20 16:15:15 1996  Geoffrey Noer  <noer@cygnus.com>
+
+        * config/i386/cygwin32.mh: add MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
+        -DMMCHECK_FORCE=1 so memory checks are loaded for cygwin32 gdb
+
+Wed Nov 20 00:43:09 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* callback.h: Delete, moved to ../include.
+	* callback.c: Delete, moved to ../sim/common.
+	* Makefile.in (SFILES,COMMON_OBJS): Delete callback.[co].
+	(callback.o): Delete rule.
+	* remote-sim.h: No longer include callback.h.
+	(sim_callback_write_stdout): Delete prototype.
+	* remote-sim.c (init_callbacks,end_callbacks): New functions.
+	(gdb_os_write_stdout, gdb_os_printf_filtered): New functions.
+	(gdb_callback, callbacks_initialized): New static globals.
+	(gdbsim_open): Call init_callbacks.
+	(gdbsim_close): Call end_callbacks.
+	(simulator_command): Call init_callbacks.
+
+	* config/h8300/h8300.mt (SIM): Change to ../sim/h8300/libsim.a.
+	* config/h8500/h8500.mt (SIM): Change to ../sim/h8500/libsim.a.
+
+Mon Nov 18 15:58:05 1996  Jim Wilson  <wilson@cygnus.com>
+
+	* config/mips/tm-mips.h (FIX_CALL_DUMMY): Change unsigned LONGEST
+	to ULONGEST.
+
+Fri Nov 15 15:34:18 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* procfs.c (wait_fd):  Handle EINTR error return from poll
+        by restarting the poll.
+	* defs.h (PIDGET): Define a default version that just
+	returns its argument unchanged.
+	* inflow.c (terminal_init_inferior): Eliminate #ifdef
+	of PIDGET and fold both alternatives into common code.
+	(pass_signal): Use PIDGET for pid passed to kill().
+
+Thu Nov 14 15:54:20 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* utils.c (paddr,preg): Use a static variable initialized to 32
+	instead of doing addr>>32 to eliminate a warning produced by GCC
+	on 32-bit systems.
+
+	* config/d10v/tm-d10v.h (ULONGEST): Define.
+
+Tue Nov 12 12:25:27 1996  Jim Wilson  <wilson@cygnus.com>
+
+	* c-typeprint.c (cp_type_print_method_args): Pass -1 for show in
+	recursive call to type_print.
+	
+Tue Nov 12 12:18:29 1996  Jim Wilson  <wilson@cygnus.com>
+
+	* defs.h (ULONGEST): New macro.
+	* alpha-tdep.c, breakpoint.c, c-exp.y, ch-exp.c, convex-xdep.c,
+	corefile.c, defs.h, f-exp.y, findvar.c, gdbcore.h, m2-exp.y,
+	m88k-tdep.c, printcmd.c, remote-hms.c, remote-mips.c, sparc-tdep.c,
+	valarith.c, valops.c, values.c, config/gould/tm-np1.h,
+	config/mips/tm-mips.h, mswin/prebuilt/gdb/cexptab.c,
+	mswin/prebuilt/gdb/fexptab.c, mswin/prebuilt/gdb/m2exptab.c:
+ 	Change all occurances of unsigned LONGEST to ULONGEST.
+
+	* configure.host (mips-sgi-irix6): Add.
+	
+Tue Nov 12 12:16:40 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* sh-tdep.c: Add functionality for target function calls.
+	* config/sh/tm-sh.h: Add support for target function calls.
+
+Tue Nov 12 12:06:58 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+	 
+	* m32r-tdep.c: Add functionality for target function calls.
+	* valops.c:    Small change to support target function calls.
+	* config/m32r/tm-m32r.h: Add support for target function calls.
+	 
+Mon Nov 11 17:15:59 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* defs.h: Modify Nov 11 12:59:00 change so _MSC_VER is checked
+	instead of _WIN32.
+	* win32-nat.c: Fix Nov 11 12:59:00 change (windows.h should
+	be included instead of windefs.h for compilers other than
+	VC++).
+	* mswin/windefs.h: Remove ^Ms and change C++ style comments
+	to C style comments.
+
+Mon Nov 11 14:32:38 1996  Mark Alexander  <marka@cygnus.com>
+
+	* utils.c (get_cell): Fix off-by-one bug.
+	* mips-tdep.c (get_frame_pointer, fix_sign_extension):
+	New functions to consolidate common code.
+	(mips_frame_chain, init_extra_frame_info): Use new functions
+	to fix problems with backtrace and finish commands on ddb board.
+
+Mon Nov 11 12:59:00 1996  Dawn Perchik <dawn@critters.cygnus.com>
+
+	* mips-tdep.c, remote-mips.c, values.c, mdebugread.c,
+	config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
+	* defs.h: Cleanup; add prototypes.
+	* corefile.c: Change FIXME #ifdef
+	* win32-nat.c: Include windefs instead of windows.h.
+	* utils.c: Add routines for printing addresses and registers 
+	based on type size.
+
+Sat Nov  9 01:05:10 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* alpha-tdep.c (heuristic_proc_desc):  Stop examining the prologue
+	if we encounter a positive stack adjustment. 
+	(find_proc_desc):  If heuristic_fence_post is non-zero, use
+	heuristic_proc_start to determine the start of a function before
+	calling heuristic_proc_desc.
+
+	* coffread.c (coff_symtab_read):  Change minimal symbol types
+	for C_LABEL symbols from mst_* to mst_file_*.
+
+	* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
+
+	* configure.in:  Handle error message from sun3 native ld when
+	configuring HLDFLAGS.
+	* configure:  Regenerated with autoconf.
+
+	* c-valprint.c (c_value_print):  Adjust value address by VALUE_OFFSET.
+	* cp-valprint.c (cp_print_value):  Prevent gdb crashes by making sure
+	that the virtual base pointer from an user object still points to
+	accessible memory.
+
+	* dbxread.c (dbx_symfile_init):  Initialize sym_stab_info to
+	clear the recently added header_files fields.
+	(dbx_symfile_finish):  Free hfiles[i].vector to avoid storage leak.
+
+Fri Nov  8 14:30:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/tm-sh.h: Added a missing comma in middle of
+ 	REGISTER_NAMES list.
+
+Fri Nov  8 12:29:51 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.c: Fix some formatting and comments.
+
+	* remote-sim.c (simulator_command): Set up callbacks before
+	entering the simulator.
+
+Thu Nov  7 15:19:08 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c: Fix some problems with inferior function calls.
+	* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be
+	a pointer to the dummy's stack instead of just a flag.
+	
+Tue Nov  5 10:21:02 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
+	* config/tm-m32r.h: Add framesize and register to extra_frame_info.
+
+Tue Nov  5 10:08:07 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* mswin/gdbwin.h:  Remove bogus definition of CORE_ADDR.
+	* mswin/srcwin.cpp (CSrcScroll1::CSrcScroll1):  Initialize depth
+	to fix divide-by-zero problem with clicking on source window.
+
+Mon Nov  4 00:48:37 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* mswin/recordit:  Fix problem with absolute paths.
+	* mswin/recordit:  Fix problem with relative paths.
+
+Sun Nov  3 18:06:42 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* mswin/{Makefile.in configure configure.in}:  New files for
+	configuring wingdb under Unix.
+
+Sat Nov  2 03:54:13 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* irix5-nat.c, osfsolib.c, solib.c (symbol_add_stub):  Handle
+	missing or zero-sized .text sections properly.
+	* mdebugread.c:  Handle scRConst and scSUndefined storage classes.
+	* stabsread.c (scan_file_globals):  Try to resolve symbols
+	for shared libraries from the minimal symbol table of the main
+	executable first.
+
+Fri Nov  1 13:59:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c, config/d10v/tm-d10v.h:  Major fixes to support
+	inferior function calls and proper stack backtracing on D10V-EVA
+	board.
+
+Fri Nov  1 10:50:51 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/linux.mh (NATDEPFILES): Fix up things so that it
+	links.
+	(GDBSERVER_DEPFILES,TERMCAP): Ditto.
+
+	* monitor.c (dev_name,targ_ops): Move static variables before
+	first use, to avoid compiler warnings.
+
+Thu Oct 31 16:37:17 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
+	* configure.tgt: Add entry for m32r target.
+	* monitor.h:   Add a flag to tell monitor_store_register to use
+			(val, regno) instead of (regno, val).
+	* monitor.c:   Make monitor_store_register honor the above flag.
+			Make monitor_exp ignore DC1/DC3 for m32r.
+			Increase buf size in monitor_dump_regs.
+
+Wed Oct 30 18:14:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-tdep.c, m32r-rom.c: New files.
+	* config/m32r/m32r.mt: New file.
+	* config/m32r/tm-m32r.h: New file.
+
+Tue Oct 29 16:56:01 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/i386/xm-cygwin32.h:
+	* config/powerpc/xm-cygwin32.h:
+	add #define LSEEK_NOT_LINEAR so source lines aren't unexpectedly
+	truncated.
+
+Tue Oct 29 18:36:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE):
+	Define.
+
+Tue Oct 29 14:59:20 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* TODO: Add item suggesting an "info bfd" command.
+
+Tue Oct 29 12:48:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c: Snapshot that supports D10V-EVA board.
+ 	
+	* config/d10v/tm-d10v.h (REGISTER_NAMES): Add imap0,imap1,dmap.
+	(TARGET_READ_FP,TARGET_WRITE_FP): Define. 
+	
+Mon Oct 28 17:34:24 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* mswin/genmakes mswin/recordit:  New scripts to generate make
+	files for MSVC.
+
+Sun Oct 27 20:18:04 1996  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips/{tm-vr5000.h,tm-vr5000el.h,vr5000.mt,vr5000el.mt}:
+	New files.
+	* configure.tgt: Modify cases for vr5000 to use new files.
+
+Sat Oct 26 07:15:14 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/alpha/alpha-osf3.mh (XM_CLIBS):  Add -lm for OSF/1-4.0.
+
+	* procfs.c (proc_set_exec_trap):  Under Alpha OSF/1-4.0, tracing
+	the entry to the exit system call to detect termination of the
+	inferior stopped working. Trace termination of the inferior via
+	PRFS_STOPTERM instead.
+	(procfs_init_inferior):  Do not trace entry to exit system call
+	if PIOCSSPCACT is defined.
+	(procfs_wait):  Handle PR_DEAD event, which signals the termination
+	of the inferior if PRFS_STOPTERM is set.
+
+	* mdebugread.c (parse_partial_symbols):  Ignore stNil section
+	start address symbols.
+
+	* sparc-tdep.c (get_saved_register):  Get saved PC from the
+	frame info if not in innermost frame.
+
+Thu Oct 24 10:51:45 1996  Mark Alexander  <marka@cygnus.com>
+
+	* dbxread.c (process_one_symbol): Interpret end-of-function
+	markers correctly; this fixes problem on Vr5000 where all
+	functions in a module had the same address.
+	* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
+	Correct	for pc-linux-gnu problem in config.guess.
+	* configure: Regenerate.
+
+Thu Oct 24 10:06:58 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* dbxread.c:  Don't swap symbols in place, since internal and
+	external forms may have different sizes.  Don't assume that an
+	internal_nlist has the same layout as an external_nlist.  Create
+	symbol for n_strx element so to hide specifics of nlist from
+	partial-stab.h. 
+	* partial-stab.h:  Don't reference dbxread symbols directly.  Use
+	CUR_SYMBOL_STRX instead.
+	* config/i386/xm-windows.h:  Define SIGQUIT and SIGTRAP.
+
+	* config/v850/tm-v850.h:  Define PS_REGNUM and TARGET_V850 for
+	MSVC builds.
+	* mswin/gdbwin.c (reg_order):  Define register order for V850.
+	* mswin/gui.cpp (CGuiApp::InitInstance):  Define target name for
+	V850.
+	* mswin/regdoc.h:  Define MAXREGS for V850.
+
+Tue Oct 22 16:28:20 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* v850-tdep.c (scan_prologue):  Changes to deal with scheduled
+	prologues correctly.  First, prologue end is now defined by
+	presence of a branch, jump or call insn.  Second, can no longer
+	fix frame offsets because we may not know the offset until after a
+	register has been saved.
+	* (v850_init_extra_frame_info):  Fixup frame offsets here because
+	we have all the info at this time.
+	* (v850_frame_chain):  Use new calling convention for scan_prologue.
+
+Tue Oct 22 10:25:29 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c, config/d10v/tm-d10v.h: Changes to allow stack
+ 	backtraces and inferior function calls.
+
+Tue Oct 22 10:32:46 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Update init.c editing to work with Oct 8 change.
+	(@HLDFLAGS@): Always edit out.
+
+Mon Oct 21 18:17:08 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): Fix 64-bit
+	sign-extension problems in calculating psymtab addresses.
+	* buildsym.c (end_symtab): Use macro to pop context.
+
+Mon Oct 21 14:40:50 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* v850-tdep.c:  Cleanup lots of things.  Add many comments.
+
+	* v850-tdep.c (v850_init_extra_frame_info v850_frame_chain):  Fix
+	sign bugs with scanning prologues.  Get a little smarter about
+	calculating the length of uninteresting instructions.
+
+Mon Oct 21 14:01:38 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* top.c: Add new commands "set annotate" and "show annotate".
+	
+Sun Oct 20 04:38:39 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (core_close):  Clear inferior_pid only if there is
+	an open core_bfd.
+
+	* cp-valprint.c (cp_print_value_fields):  Pass correct address
+	to val_print, not 0.
+
+	From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
+	* eval.c (evaluate_subexp_standard) [case BINOP_REPEAT]: Chase
+	typedefs before checking for integral type of right operand.
+
+Fri Oct 18 17:26:22 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mdebugread.c (parse_symbol): Fix crash when malloc has
+	no type info and void type has no associated pointer type.
+
+Thu Oct 17 18:18:20 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.host: New file, host configuration mapping.
+	* configure.tgt: New file, target configuration mapping.
+	* configure.in: Remove host and target mapping.
+	* configure: Rebuild.
+
+Wed Oct 16 17:46:03 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* breakpoint.c (must_shift_inst_regs): New global.
+	(bpstat_stop_status): Change #if uses of DECR_PC_AFTER_BREAK into
+	equivalent expression uses.
+	* infrun.c (wait_for_inferior): Ditto.
+
+Wed Oct 16 01:53:43 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* v850-tdep.c (v850_push_arguments):  Use symbolic names for arg
+	registers.
+	* config/v850/tm-v850.h:  Change FP to 29.  Define arg regs.
+
+Tue Oct 15 16:30:07 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (init.c):  Don't use -s option with grep.  It means
+	something different under Digital Unix.
+
+	* buildsym.c (finish_block):  Treat LOC_BASEREG_ARG and
+	LOC_LOCAL_ARG as arguments so that GDB will know about function
+	args declared this way.  Mostly affects dwarf.
+	* dwarfread.c (decode_die_type):  Change default type from int to
+	void.  This allows GDB to recognize void functions.
+	* (new_symbol):  If AT_PROTOTYPED is present, set a flag in the
+	type structure.
+	* findvar.c (extract_floating store_floating):  Clean up comments
+	to reflect reality.
+	* gdbtypes.h:  Add TYPE_FLAG_PROTOTYPED so that we can tell if a
+	function has a prototype.  Currently, only dwarf supports this.
+	* utils.c (floatformat_from_doublest):  Fix logic error with
+	converting from double to float.  (It wasn't shifting mant_long if
+	it had a hidden bit.)
+	* v850-tdep.c:  Add support for function calling.  Fix some
+	problems with debugging code w/o debug symbols.
+	* config/v850/tm-v850.h:  Ditto.
+
+Tue Oct 15 18:19:42 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* utils.c: Always ensure that size_t is defined.  Check
+	HAVE_STDDEF_H rather than __STDC__
+	(xmalloc, xrealloc): Use size_t rather than long.
+
+Tue Oct 15 14:24:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* config/powerpc/tm-ppc-eabi.h: Undefine NO_SINGLE_STEP so targets
+	can use single-step commands.
+
+Sun Oct 13 11:38:25 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* stabsread.c (define_symbol):  If REG_STRUCT_HAS_ADDR is non-zero,
+	follow typedefs before checking TYPE_CODE for structures and unions.
+
+Fri Oct 11 15:43:54 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* frame.h:  Move definition of struct frame_saved_regs to before
+	struct frame to make it possible to use frame_saved_regs in
+	EXTRA_FRAME_INFO macro.
+
+	* v850-tdep.c config/v850/tm-v850.h:  Lotsa new functions and
+	macros to make frame operations (such as backtrace) work.
+
+Fri Oct 11 14:23:50 1996  Fred Fish  <fnf@cygnus.com>
+
+	* dbxread.c (process_one_symbol): Check for null string directly
+	rather than using strcmp against "".
+	* partial-stab.h: Ditto.
+
+Fri Oct 11 12:18:32 1996  Mark Alexander  <marka@cygnus.com>
+
+	* gdbserver/{gdbreplay.c,low-linux.c,remote-utils.c,utils.c}:
+	Make it compile on Linux and eliminate some warnings.
+
+Thu Oct 10 16:32:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (init.c):  Fixup final sed script to work around
+	Linux bug with `p' operator.
+
+Wed Oct  9 18:02:48 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-mips.c: Use the correct name everywhere (DDB) for NEC's
+ 	VR4300 target.
+	(ddb_ops, pmon_ops): Fix the documentation strings.
+
+Wed Oct  9 07:42:44 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (init.c):  Retro HPUX grep lacks -h option.  Strip
+	filenames with sed instead.
+
+Tue Oct  8 15:59:44 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* defs.h:  Remove decls of xmalloc and xrealloc.  There is a
+	conflicting definition in libiberty.h.
+
+Tue Oct  8 11:47:13 1996  Fred Fish  <fnf@cygnus.com>
+
+	* dbxread.c (dbx_symfile_read): Call free_pending_blocks rather
+	than poking global variable (which is now static).
+	* hpread.c (hpread_build_psymtabs): Ditto.
+	* os9kread.c (os9k_symfile_read): Ditto.
+	* xcoffread.c (xcoff_initial_scan): Ditto.
+
+	* buildsym.h (free_pending_blocks): Declare here.
+	(pending_blocks): Remove declaration of global symbol.
+	(free_pendings): Remove declaration of global symbol.
+	(make_blockvector): Declare here.
+	(record_pending_block): Declare here.
+	
+	* dstread.c (make_blockvector): Remove static copy that was old
+	clone of version in buildsym.c.
+	(process_dst_block): Call record_pending_block rather than doing
+	it by hand.
+	(read_dst_symtab): Ditto.
+
+	* buildsym.c (make_blockvector): Make global rather than static,
+	(record_pending_block): New function, code moved from finish_block.
+	(finish_block): Use record_pending_block.
+	(free_pending_blocks): New function.
+	(really_free_pendings): Call free_pending_blocks.
+	(pending_blocks): Make static instead of global.
+	(free_pendings): Make static instead of global.
+	
+Tue Oct  8 09:03:22 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/i386/windows.mh config/i386/xm-windows.h::  New config
+	files to support building Wingdb (built under Microsoft build
+	environment).
+
+	* Makefile.in:  Add rule for hpux-thread.o (needs special header
+	files).
+	* (SUBDIRS):  Remove mswin.
+	* Change procedure for creating init.c.  Speeds things up quite a
+	bit.
+	* config.in configure configure.in:  Check for select, poll.
+	* Check for OSF header files before including hpux-thread.o.
+	* Don't configure doc or testsuite when building under MSVC.
+	* findvar.c value.h (read_register_pid write_register_pid):  Make
+	global.  Needed for hppa-tdep.c.
+	* (supply_register):  Don't set pid to inferior_pid when supplying
+	registers.
+	* hppa-tdep.c (saved_pc_after_call):  frame_saved_pc ->
+	FRAME_SAVED_PC.
+	* (frame_saved_pc):  Change name to hppa_frame_saved_pc.
+	* (hppa_pop_frame):  Don't use a pid of 0 with target_write_pc.
+	Use write_pc instead, which uses the correct pid.
+	* (target_read_pc target_write_pc):  Use read/write_register_pid
+	instead of read/write_register to preserve the pid passed in.
+	* inftarg.c (child_can_run):  Add flag child_suppress_run to allow
+	hpux-threads.c to override this as a runnable target.
+	* config/pa/nm-hppah.h:  Define target_new_objfile and
+	target_pid_to_str.
+	* config/pa/tm-hppa.h (FRAME_SAVED_PC):  Use hppa_frame_saved_pc
+	instead of frame_saved_pc.
+	* config/m68k/tm-m68k.h:  Define TARGET_M68K for Wingdb.
+	* config/m68k/tm-monitor.h:  Use FRAME_CHAIN_VALID_ALTERNATE, since
+	we can't easily determine the start file bounds with ELF.
+	* config/mips/tm-mips.h:  Define TARGET_MIPS for Wingdb.
+	* hpux-thread.c:  New file for HPUX/OSF thread support.
+	* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
+	RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
+	cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
+	cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
+	cma_stack_int.h cma_tcb_defs.h cma_util.h}:  New files for OSF
+	thread support.
+
+Sun Oct  6 15:48:09 1996  Fred Fish  <fnf@cygnus.com>
+
+	* buildsym.c (finish_block): Change innerblock_anon_complaint to
+	print the addresses as part of the complaint.  Add a complaint for
+	cases where the block end address is smaller than the block start
+	address, in case any such conditions slip through our fixup mechanism.
+	* symmisc.c (dump_symtab): Only print blockvector for primary
+ 	symtabs, to avoid massive duplication of output due to secondary
+ 	symtabs that point to same blockvector.  Also do some minor 
+	formatting tweaks.
+
+Mon Oct  7 10:42:32 1996  Per Bothner  <bothner@deneb.cygnus.com>
+
+	Replace header_files global by per-objfile field.
+	* gdb-stabs.h (struct dbx_symfile_info):  Add fields header_files,
+	n_header_files, n_allocated_header_files.
+	* stabsread.h (header_files, n_header_files, n_allocated_header_files):
+	Replace externs by macros HEADER_FILES, N_HEADER_FILES, and
+	N_ALLOCATED_HEADER_FILES.
+	* dbxread.c (dbx_symfile_finish):  Free HEADER_FILES.
+	(free_header_files, init_header-files):  Don't free/init headerfiles.
+	(various functions):  Use macros instead of header_files globals.
+	* stabsread.c (various functions):  Likewise.
+
+Sun Oct  6 22:43:06 1996  Jason Merrill  <jason@yorick.cygnus.com>
+
+	* dwarf2read.c (read_tag_reference_type): New fn.
+	(read_type_die): Call it.
+	(dwarf_attr): Also look in the DIEs referred to by specification
+ 	or abstract_origin attributes.
+
+Wed Oct  2 22:07:16 1996  Fred Fish  <fnf@cygnus.com>
+
+	* inferior.h (IN_SIGTRAMP): Pass pc to SIGTRAMP_START and
+	SIGTRAMP_END.
+	* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END): 
+	Define with dummy pc arg.
+	* config/m68k/tm-nbsd.h: Ditto.
+	* doc/gdbint.texinfo: Document that SIGTRAMP_START and
+	SIGTRAMP_END are macros that take an single argument.
+
+Mon Sep 30 20:02:45 1996  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h: Remove define of PRIVATE_XMALLOC.
+
+Mon Sep 30 15:39:28 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/v850/tm-v850.h:  Use distinct register for PC, not EIPC.
+
+Mon Sep 30 11:16:34 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* top.c (execute_control_command):  Free values from while_control
+	and if_control conditions after evaluation to avoid storage leaks.
+	From Peter Schauer.
+ 
+Fri Sep 27 17:43:06 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure configure.in:  Recognize v850 target.
+	* v850-tdep.c:  New file, NEC V850 target support.
+	* config/v850/{v850.mt tm-v850.h}:  New files for NEC V850 support.
+
+Fri Sep 27 14:48:15 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Update current_line and
+	current_symtab when stepping continues in the middle of a new line.
+
+Fri Sep 27 10:25:30 1996  Fred Fish  <fnf@cygnus.com>
+
+	* top.c (print_gdb_version): Rewrote to comply with new GNU coding
+	standards for the --version option.
+	(print_gnu_advertisement): Remove, now part of print_gdb_version.
+	(show_version): Remove call to print_gnu_advertisement.
+	* top.h (print_gnu_advertisement): Remove prototype.
+	* main.c (print_gdb_help): Move help to static function and
+	add prototype.
+	(main): Call print_gdb_help rather than inlining it.
+	(main): Remove call to print_gnu_advertisement.
+	
+Fri Sep 27 13:32:53 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/d10v/tm-d10v.h (TARGET_{INT,PTR}_BIT): Define.
+	(TARGET_{,LONG_}DOUBLE_BIT): Ditto.
+
+Thu Sep 26 23:10:26 1996  Mark Alexander  <marka@cygnus.com>
+
+	* configure.in, config/i386/tm-linux.h: Fix configure
+	problem on older Linux systems that prevented core files
+	from being recognized.
+
+Wed Sep 25 18:31:33 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dbug-rom.c: New file, support for Motorola's dBUG monitor.
+	* config/m68k/monitor.mt (TDEPFILES): Add it.
+	* NEWS: Mention it.
+
+Mon Sep 23 16:13:50 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* config/d10v/tm-d10v.h (SAVED_PC_AFTER_CALL): Fixed.  
+	Now single-steps correctly.
+	* d10v-tdep.c (d10v_pop_frame): Fixed.
+
+Fri Sep 20 16:10:58 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to
+	be consistent with GCC.
+	(FPUL_REGNUM, etc): Renumber to match list changes.
+	(ADDR_BITS_REMOVE): Delete.
+	* sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
+	Rearrange to match REGISTER_NAMES.
+	* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
+
+Thu Sep 19 16:19:01 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c:  Stack chain should work now. 
+
+Tue Sep 17 18:46:57 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* d10v-tdep.c, config/d10v/tm-d10v.h: Snapshot. 
+
+Tue Sep 17 12:20:50 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: Add cases for MIPS 5000 like MIPS 4300.
+	* configure: Rebuild.
+
+Tue Sep 17 12:09:00 1996  Dawn Perchik <dawn@critters.cygnus.com>
+
+	* ser-e7kpc.c: Added wingdb support for target e7000pc.
+
+Tue Sep 17 10:56:52 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* remote-mips.c (pmon_wait): DDB PMON does not require forced
+ 	re-entry back into debug mode.
+
+Mon Sep 16 14:32:58 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* remote-mips.c (mips_load): Ensure that the PC is explicitly
+ 	loaded after a load to a DDB PMON system.
+ 	
+Fri Sep 13 12:02:39 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (INTERNAL_LDFLAGS): Add @HLDFLAGS@ to list.
+	(HLDENV): Set to @HLDENV@.
+	(gdb): Prefix link command line with $(HLDENV).
+	* configure.in: Add support to test for --enable-shared and
+	generate appropriate values for HLDFLAGS and HLDENV.
+	* configure: Regenerated with autoconf.
+
+Sun Sep  8 15:26:27 1996  Fred Fish  <fnf@cygnus.com>
+
+	* alpha-nat.c (fetch_core_registers): Match Sep 4 gdbcore.h prototype
+	change for core_read_registers in struct core_fns.
+	* core-regset.c (fetch_core_registers): Ditto & add prototype.
+	* core-sol2.c (fetch_core_registers): Ditto & add prototype.
+	* i386aix-nat.c (fetch_core_registers): Ditto & add prototype.
+	* i386b-nat.c (fetch_core_registers): Ditto.
+	* i386mach-nat.c (fetch_core_registers): Ditto & add prototype.
+	* irix4-nat.c (fetch_core_registers): Ditto.
+	* irix5-nat.c (fetch_core_registers): Ditto.
+	* lynx-nat.c (fetch_core_registers): Ditto & add prototype.
+	* m68knbsd-nat.c (fetch_core_registers): Ditto.
+	* mips-nat.c (fetch_core_registers): Ditto & add prototype.
+	* rs6000-nat.c (fetch_core_registers): Ditto.
+	* sparc-nat.c (fetch_core_registers): Ditto.
+	* sun3-nat.c (fetch_core_registers): Ditto & add prototype.
+	* ultra3-nat.c (fetch_core_registers): Ditto & add prototype.
+
+	* alpha-nat.c (register_addr): Match Sep 4 gdbcore.h prototype change.
+	* delta68-nat.c (register_addr): Ditto.
+	* gdbserver/low-linux.c (register_addr): Ditto.
+	* gdbserver/low-hppabsd.c (register_addr): Ditto.
+	* i386m3-nat.c (register_addr): Ditto.
+	* mips-nat.c (register_addr): Ditto.
+	* ultra3-nat.c (register_addr): Ditto.
+
+Sun Sep  8 15:14:00 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* blockframe.c (inside_main_func):  Cleanup slightly.  Move
+	mainsym def into the block it's used in.
+	* configure.in configure:  Allow NATDEPFILES to be recognized in
+	.mh files regardless of whitespace.
+
+	* cpu32bug-rom.c (cpu32bug_cmds):  Change load_response string to
+	keep downloads from hanging.
+
+	* remote-wiggler.c:  Add support for flash upgrades.
+	* (wiggler_error):  Fix message format.  Add new error code.
+	* (wiggler_write_byets):  Error code is hex.  Report errors with
+	proper routine name.
+	* (wiggler_read_byets):  Report errors with proper routine name.
+	* (get_packet):  Add support for new flash commands.
+	* (wiggler_load):  Call clear_symtab_users() to reset things
+	properly after download.
+	* (flash_xfer_memory bdm_update_flash_command):  New funxtions to
+	support flash upgrades for Wiggler.
+	* (_initialize_remote_wiggler):  Add `bdm update-flash' command.
+
+Fri Sep  6 13:14:13 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* ser-tcp.c: don't include netinet/tcp.h if __CYGWIN32__
+
+Thu Sep  5 17:05:13 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/i386/cygwin32.mh:
+	* config/powerpc/cygwin32.mh: build ser-tcp.o for both hosts
+
+Thu Sep  5 12:09:13 1996  Per Bothner  <bothner@deneb.cygnus.com>
+
+	* value.h (COERCE_REF):  Fix previous change.
+	(COERCE_ENUM):  Add a check_typedef  (this is the real fix).
+
+Thu Sep  5 03:28:30 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* eval.c (evaluate_subexp_standard): In case of OP_ARRAY: make a
+	better check of array boundaries.
+
+Thu Sep  5 01:29:42 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure:  Update aclocal.m4 and re-run autoconf to get correct
+	defs for BFD stuff.
+	* remote-wiggler.c (wiggler_error):  Error codes are hex.  Also,
+	fix default message generation.
+
+Wed Sep  4 17:28:40 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in:  Add mswin to SUBDIRS.  Add rules for
+	mswin/libwingdb.a and remote-wiggler.o.
+	* breakpoint.c (breakpoint_here_p):  Clean up bp enabled test.
+	* (breakpoint_inserted_here_p):  New func, just like
+	breakpoint_here_p, except it's honest.  Honestly.
+	* breakpoint.h:  Proto for above.
+	* configure configure.in:  Add mswin to configdirs if host is
+	i[3456]86-*-windows.
+	* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
+	Change all vars that can contain addresses to type CORE_ADDR.
+	* findvar.c (supply_register):  Allow val to be NULL.  This means
+	that regno is unsupported.
+	* (read_pc read_pc_pid write_pc write_pc_pid):  Make non-pid forms
+	just call pid forms with inferior_pid so that there's only once
+	place to hack PC's and such.
+	* infrun.c (proceed):  Don't skip breakpoints if user changed PC.
+	* remote-wiggler.c:  New file.  Support for BDM interface from
+	Macraigor Systems.
+	* serial.c:  Enhance serial logging capability.  Add hex and octal
+	output modes (set remotelogbase {hex|octal|ascii}.  Also log
+	breaks, timeouts, errors, and eofs.
+	* serial.h:  Redefine SERIAL_SEND_BREAK to go through a wrapper
+	function so that we can log breaks.  Don't export serial_logfile
+	or serial_logfp.
+	* top.c (execute_command):  Don't test for serial_logfp here.
+	Just call serial_log_comand, and let serial.c sort it out.
+	* valops.c (value_of_variable):  Don't attempt to establish frames
+	for static and global variables.  This makes things work a bit
+	better if the stack or frame pointer is trashed.
+	* config/m68k/monitor.mt (TDEPFILES):  Add remote-wiggler.o.
+	* config/m68k/tm-m68k.h:  Define STACK_ALIGN.  CPU32 can't hack
+	misaligned stacks during function calls.
+
+Wed Sep  4 13:06:26 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* terminal.h: Don't use #elif.
+
+Wed Sep  4 06:49:35 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-exp.c (parse_tuple_element): Allow (*): for array tuples
+	if we have a type.
+
+	* eval.c (evaluate_subexp_standard): In case of OP_ARRAY:
+	check number of args against bounds of array to avoid
+	memory corruption.
+
+	* value.h (COERCE_REF): Do a CHECK_TYPEDEF in case we get
+	a TYPE_CODE_TYPEDEF.
+
+Fri Aug 30 15:07:14 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* remote-mips.c: Provide support for DDBVR4300 target board.
+	(ddb_open, ddb_ops): Added.
+	(mips_monitor_type): MON_DDB Added.
+	(mips_enter_debug, mips_exit_debug, mips_initialize,
+ 	mips_fetch_registers, common_breakpoint, mips_load,
+ 	_initialize_remote_mips): Updated.
+
+Thu Aug 29 17:00:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* nlm/configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
+	* nlm/configure: Regenerate.
+
+	* gdbserver/configure.in (i[345]86-*-*): Recognize i686 for
+	pentium pro.
+
+Wed Aug 28 13:11:15 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: If CY_AC_PATH_TCLCONFIG can't find TCL, don't run
+	CY_AC_LOAD_TCLCONFIG.
+	* configure: Rebuild.
+
+Tue Aug 27 12:40:40 1996  Fred Fish  <fnf@cygnus.com>
+
+	* infrun.c (wait_for_inferior): Initialize stop_func_end before calling
+	find_pc_partial_function.
+
+Tue Aug 27 10:17:34 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure: Regenerate again.
+
+Tue Aug 27 04:25:08 1996  Geoffrey Noer  <noer@cygnus.com>
+
+        * configure.in: work around host_alias configure bug.
+        AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
+        and second by AC_CANONICAL_SYSTEM).  The second clobbers the
+        previous setting.  Circumventing by moving the second check
+        to before the first.
+	* configure: regenerated
+
+Mon Aug 26 18:36:54 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* config/d10v/d10v.mt: New file.
+	* config/d10v/tm-d10v.h: New file.	
+	* configure.in: New target D10V.	 
+	* d10v-tdep.c: New file. 
+
+Sun Aug 25 00:09:47 1996  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* rs6000-tdep.c: Fix typo in comment.
+	* valops.c (call_function_by_hand): Set using_gcc to 2
+	for code compiled without -g, per comment in code.
+	* config/a29k/tm-a29k.h (STACK_ALIGN): Add comment.
+	* config/sparc/tm-sparc.h (STACK_ALIGN): Add comment.
+	* config/sparc/tm-sp64.h (STACK_ALIGN): Add comment.
+	* config/pyr/tm-pyr.h (STACK_ALIGN): Add comment.
+	* config/m88k/tm-m88k.h (STACK_ALIGN): Add comment.
+	* config/pa/tm-hppa.h (PUSH_ARGUMENTS): Enclose args in ()'s.
+	(STACK_ALIGN): Add comment, move to be with other associated
+ 	macros, and document.
+	* config/mips/tm-mips.h (PUSH_ARGUMENTS): Enclose args in ()'s.
+	(STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS.
+	* config/alpha/tm-alpha.h (PUSH_ARGUMENTS): Enclose args in ()'s.
+	* config/rs6000/tm-rs6000.h (STACK_ALIGN): Remove completely,
+	handled by PUSH_ARGUMENTS.
+	(PUSH_ARGUMENTS): Enclose args in ()'s.
+	
+Fri Aug 23 13:55:05 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Try to reenable shared library
+	breakpoints even if auto_solib_load is not set.
+
+Wed Aug 21 16:31:27 1996  Fred Fish  <fnf@cygnus.com>
+
+	* valprint.c (print_longest): Test for CC_HAS_LONG_LONG as well as
+	PRINTF_HAS_LONG_LONG.
+	* expprint.c (dump_expression): Ditto.
+	* configure.in: Fix check for long long support in compiler to
+	use a function body, not a nested function.
+	* configure: Rebuild with autoconf.
+	
+Tue Aug 20 17:59:42 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* aclocal.m4: Include ../bfd/aclocal.m4.
+	* configure.in: Add stdlib.h to AC_CHECK_HEADERS.  Call
+	BFD_NEED_DECLARATION on malloc, realloc, and free.
+	* acconfig.h: Add NEED_DECLARATION_MALLOC,
+	NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
+	* configure, config.in: Rebuild.
+	* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
+	rather than __STDC__.  Only declare malloc, realloc, and free if
+	NEED_DECLARATION_* is defined.
+
+Tue Aug 20 15:37:03 1996  Fred Fish  <fnf@cygnus.com>
+
+	* solib.c (_initialize_solib): Add missing '\' chars at ends of
+ 	strings that continue on next line.
+	(enable_break): Replace "return 0" with setting success to zero
+ 	and letting normal return handle the return.
+
+Sat Aug 17 14:16:23 1996  Fred Fish  <fnf@cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Make sure sp and struct_addr
+	are properly aligned.
+
+Fri Aug 16 17:54:26 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_fix_call_dummy): Add full set of arguments.
+	* config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Pass all arguments
+	to function, declare function correctly.
+
+Fri Aug 16 17:24:35 1996  Dawn Perchik <dawn@critters.cygnus.com>
+
+        * symtab.h: changed namespace to _namespace for compiling under 
+	MFC v4.0.
+
+Fri Aug 16 13:52:21 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Update for various recent changes, add some
+	comments.
+
+Fri Aug 16 15:47:36 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Cast args to be an
+	integer for type correctness.
+
+Fri Aug 16 15:15:37 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* config/mips/{vr4300.mt, vr4300el.mt} (SIM): Add -lm when
+ 	simulator is included.
+
+Thu Aug 15 13:44:13 1996  Fred Fish  <fnf@cygnus.com>
+
+	* findvar.c (write_register_pid): Only needed when TARGET_WRITE_PC
+	is not defined.
+	(read_register_pid): Only needed when TARGET_READ_PC is not
+	defined.
+	* hppa-tdep.c (frame_saved_pc): Remove prototype.
+	* infptrace.c (udot_info): Prototype when CHILD_XFER_MEMORY is
+	not defined.
+	* config/xm-aix4.h (aix_resizewindow): Convert old style decl
+	to prototype.
+	* xcoffsolib.c (command.h): Include for needed prototypes.
+
+Wed Aug 14 17:54:19 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/i386/cygwin32.mh: Set NAT_FILE to nm-empty.h to make
+	native work.
+
+Wed Aug 14 02:03:42 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Blair MacIntyre <bm@cs.columbia.edu>:
+	* hppa-tdep.c (hppa_fix_call_dummy): Use MSYMBOL_TYPE rather
+	than SYMBOL_TYPE on msymbols.
+	* somsolib.c (som_solib_create_inferior_hook): Ditto.
+
+	* Makefile.in (init.c):  Generate with prototypes.
+
+	* config/pa/tm-hppa.h (frame_saved_pc): Add prototype.
+	* config/rs6000/xm-rs6000.h (aix_resizewindow): Ditto.
+	* config/rs6000/tm-rs6000.h (frame_initial_stack_address): Ditto.
+	(pc_load_segment_name): Ditto.
+	(pop_frame): Ditto.
+	(extract_return_value): Ditto.
+	(is_magic_function_pointer): Ditto.
+	(push_dummy_frame): Ditto.
+	(fix_call_dummy): Ditto.
+	(push_arguments): Ditto.
+	(skip_trampoline_code): Ditto.
+	(aix_process_linenos): Ditto.
+
+	* config/m68k/tm-cisco.h (get_longjmp_target): Add prototype.
+	* config/m68k/tm-es1800.h: Ditto.
+	* config/m68k/tm-vx68.h: Ditto.
+	* config/m68k/tm-sun3.h: Ditto.
+	* config/m68k/tm-m68kv4.h: Ditto.
+
+Tue Aug 13 23:04:36 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/mips/nm-mips.h (get_longjmp_target): Add prototype.
+	* config/mips/nm-irix3.h (get_longjmp_target): Add prototype.
+	* remote-mips.c (mips_read_processor_type): Remove prototype.
+	* mips-tdep.c (gdb_print_insn_mips): Add prototype and make static.
+	* irix5-nat.c (fetch_core_registers): Add prototype.
+
+Mon Aug 12 21:23:44 1996  Fred Fish  <fnf@cygnus.com>
+
+	* remote-pa.c (boot_board): Add dummy params to make type compatible
+ 	for passing to add_com.
+	* scm-exp.c (scm_lreadr): Ensure svalue is not used uninitialized.
+	* buildsym.c (compare_line_numbers): Change function to match
+	prototype and also what qsort expects.
+
+Mon Aug 12 19:19:00 1996  Mark Alexander  <marka@cygnus.com>
+
+	* remote.c: Make remote_write_size public.
+	* sh-tdep.c (_initialize_sh_tdep): Set remote_write_size to 300
+	to prevent packet errors with some versions of CMON.
+
+Mon Aug 12 16:20:58 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* defs.h:  Define CONST_PTR as blank if compiling with Microsoft
+	C, else it's `const'.
+	* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
+	scm-lang.c: Microsoft C can't hack const pointers.  Use CONST_PTR
+	macro instead.
+	* configure configure.in defs.h:  Use AC_C_CONST to figure out if
+	the compiler supports const.  Gets rid of some cruft in defs.h.
+	* dwarf2read.c:  <string.h> -> "gdb_string.h"
+	* remote-sim.c:  Add prototypes.  Fix call to gdbsim_kill.
+	* sparcl-tdep.c (download):  Add prototypes to write_routine and
+	start_routine args.
+
+	* mswin/gdbwin.c:  Don't include both varargs.h AND stdarg.h.  Get
+	rid of varargs.h  Include string.h.
+	* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
+	update):  Fix prototypes, fix calls.
+	* (update):  Return value for catch_errors.
+	* (run_execute_command togdb_command_from_tty togdb_command):
+	Cleanup catching of errors from calls to execute_command.  Also,
+	dup command string to avoid modifying const strings.
+	* (togdb_breakinfo_i_init togdb_breakinfo_i_next):  Use 0 instead
+	of NULL when see if b->address isn't set.
+	* (bi_disable_bpt bi_enable_bpt bi_delete_all
+	bi_delete_breakpoint):  Add arg to calls to update.
+	* (gui_command):  Add prototype.
+	* (mswin_query):  Fix prototype.
+	* (_initialize_gdbwin):  Dup string to avoid modifying const.
+	* (info_path togdb_get_info_path):  Remove const from decls cuz
+	this can't be const (it points at malloc'ed memory).
+	* (togdb_searchpath):  Remove const from path.  Dup string to
+	avoid modifying const strings.
+	* rindex -> strrchr.
+	* (gdbwin_list_symbols):  Regexp param is const.
+	* Fix lots of refs to psymtabs to deref correct pointers.
+	* (togdb_set_breakpoint_sal):  Call set_breakpoint_sal with sal,
+	not &sal.
+	* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
+	toget_set_info_path):  Fix prototypes to match reality.
+	* mswin/gui.cpp:  Define _beginthreadex and _endthreadex routines
+	with proper prototypes.
+	* mswin/iface.cpp (gdbwin_fputs):  Define with correct number of args.
+	* mswin/ser-win32s.c:  Fix defs of min and max.
+	* mswin/serdll32.c (OpenComm16):  Make cbInQueue and cbOutQueue be
+	USHORT.
+	* (WriteComm16):  Change lpBug from LPVOID to LPCSTR.
+	* mswin/serdll32.h:  Fix prototypes for OpenComm16 and WriteComm16.
+
+Sun Aug 11 20:54:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* main.c (main):  Make sure command loop is used with cygwin32.
+	* terminal.h:  Allow cygwin32 to use termios.h.
+
+Fri Aug  9 12:42:49 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* somread.c (som_symtab_read): Handle secondary definition
+	symbols (aka weak symbols).
+
+	* config/tm-hppa.h (EXTRACT_RETURN_VALUE): Fix thinko in
+	last change.
+
+Thu Aug  8 10:12:36 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* symfile.c (symfile_bfd_open):  Change ifdef from __WIN32__ to
+	_WIN32.
+
+	* somread.c:  Rearrange order of includes to fix warnings under
+	hpux-10.10.  Also don't include sys/file.h.
+
+Wed Aug  7 21:45:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* dbxread.c:  Don't include param.h or sys/file.h.
+	* (dbx_symfile_read):  Determine symfile_relocatable from bfd
+	flags instead of file extension.  Also clean up a little bit.
+
+Wed Aug  7 17:18:37 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c
+	mdebugread.c os9kread.c source.c top.c utils.c:  Don't
+	include param.h or sys/file.h (or unistd.h in some cases).
+	* defs.h exec.c inflow.c remote-array.c remote-e7000.c
+	sparcl-tdep.c terminal.h utils.c:  Replace all occurances of
+	__WIN32__, WINGDB, WIN32, etc... with _WIN32.
+	* main.c:  Remove #ifndef WINGDB around option processing.  Fix
+	bug with passing argc==0 and argv==NULL to getopt.
+	* (main) Remove calls to access() before source_command.  Let
+	soure_command handle access errors.
+	* maint.c (maintenance_dump_me):  #ifdef out for _WIN32.
+	* symtab.c (operator_chars):  Make this global for wingdb.
+	* top.c (disconnect):  #ifdef out for _WIN32.
+	* (source_command):  If got an error and from_tty, then call print
+	error, else just return quietly.
+	* utils.c (fatal_dump_core):  Can't kill ourselves under windows.
+	Just exit.
+	* (pollquit notice_quit):  #ifdef out stuff that doesn't exist
+	under windows. 
+
+Wed Aug  7 09:59:19 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Tweak for
+	structures > 4 bytes in size.
+
+	* valops.c (call_function_by_hand): Handle aligning stacks that
+	grow up correctly.
+	* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define.
+	(STACK_ALIGN): Define.
+	* hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte
+	alignment on structs/unions.
+	
+Sun Aug  4 16:22:42 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/powerpc/nm-aix.h (PTRACE_ARG3_TYPE): Define to "int *",
+	which is the documented type under at least AIX 3 and AIX 4.
+	
+Sat Aug  3 04:02:46 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/alpha/alpha-osf3.mh (XM_FILE): Change from xm-alpha.h to
+	xm-alphaosf.h.
+	(MMALLOC_CFLAGS): Define NO_MMCHECK to not install consistency
+	checks.
+
+Thu Aug  1 10:11:34 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/mips/tm-mips.h (TM_MIPS_H): Enclose file contents in
+	this, define when contents are included.
+	(mips_read_processor_type): Add prototype.
+	* config/mips/xm-mips.h: Remove strdup decl, now in gdb_string.h
+	* mdebugread.c (ecoff_relocate_efi): Add prototype.
+	(fixup_sigtramp): Only needed when TM_MIPS_H is defined.
+
+Wed Jul 31 20:21:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* rs6000-nat.c (add_vmap): Return 0 to caller rather than random value.
+	(vmap_ldinfo): Ensure got_exec_file is not used uninitialized.
+	(fetch_core_registers): Add prototype.
+	(vmap_symtab): Ditto.
+	(objfile_symbol_add): Ditto.
+	(add_vmap): Ditto.
+	(vmap_ldinfo): Ditto.
+	(vmap_exec): Ditto.
+
+Tue Jul 30 17:57:46 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* stabsread.c (get_substring): Declare second arg as int.
+
+	* remote-es.c: Include gdb_string.h after defs.h.
+
+Mon Jul 29 21:13:20 1996  Fred Fish  <fnf@cygnus.com>
+
+	* rs6000-tdep.c (push_arguments): Remove unused variable "pc".
+	(branch_dest): Remove unused variable "offset".
+	(pop_dummy_frame): Add prototype and make static.
+	(push_arguments): Guard against using len uninitialized.
+	(push_arguments): Guard against using arg uninitialized.
+	(frame_saved_pc): Remove unused variable "frameless".
+	(free_loadinfo): Ifdef out unused function.
+
+	* xcoffread.c (compare_lte): Change prototype and function to
+	be correct type for passing to qsort.
+	(add_stab_to_list): Ifdef out unused function and prototype.
+	(compare_lte): Add prototype
+	(arrange_linetable): Ditto.
+	(record_include_begin): Ditto.
+	(record_include_end): Ditto.
+	(process_linenos): Ditto.
+	(xcoff_next_symbol_text): Ditto.
+	(scan_xcoff_symtab): Ditto.
+	(xcoff_initial_scan): Ditto.
+
+	* mips-tdep.c (mips_read_processor_type): Add parens around
+	bitwise-and operands in comparison; previous expression always
+	evaluated to 0 because of equality comparison of two constants.
+
+	* rs6000-tdep.c (skip_prologue): Add missing parens around
+	operands of logical-or so that first operand does not bind
+	to previous logical-and.
+
+	* configure.in: Expand "long long" test to include code that triggers
+	known problem on HPUX with native compiler.
+	(configure): Regenerated.
+
+Mon Jul 29 18:12:27 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* somsolib.c (som_solib_create_inferior_hook): Don't
+	warn if __d_pid can't be found.
+
+Sun Jul 28 10:46:39 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/mips/tm-mips.h (struct frame_info): Forward decl.
+	(struct type): Ditto.
+	(struct value): Ditto.
+
+	* config/mips/tm-mips.h (sigtramp_address): Move extern decl
+ 	from mips-tdep.c to here.
+	(sigtramp_end): Ditto.
+	(fixup_sigtramp): Ditto.
+
+	* config/mips/tm-mips.h (init_extra_frame_info): Add prototype.
+	(mips_frame_chain): Ditto.
+	(mips_step_skips_delay): Ditto.
+	(mips_frame_saved_pc): Ditto.
+	(mips_find_saved_regs): Ditto.
+	(mips_frame_num_args): Ditto.
+	(mips_pop_frame): Ditto.
+	(mips_extract_return_value): Ditto.
+	(mips_store_return_value): Ditto.
+	(mips_push_dummy_frame): Ditto.
+	(mips_push_arguments): Ditto.
+	(mips_do_registers_info): Ditto.
+	(ecoff_relocate_efi): Ditto.
+	(ecoff_relocate_efi): Ditto.
+	* irix4-nat.c (fetch_core_registers): Add prototype.
+	* mips-tdep.c (read_next_frame_reg): Add prototype
+	(heuristic_proc_start): Ditto.
+	(heuristic_proc_desc): Ditto.
+	(mips_print_register): Ditto.
+	* config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype.
+	(procfs_stopped_by_watchpoint): Ditto.
+	* config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype.
+	(procfs_stopped_by_watchpoint): Ditto.
+	* config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype.
+	(struct symbol): Add forward decl for prototype.
+
+	* breakpoint.c (internal_breakpoint_number): Only needed if
+	GET_LONGJMP_TARGET or SOLIB_ADD is defined.
+
+	* objfiles.c (ecoff_relocate_efi): Remove prototype.
+
+Sat Jul 27 17:47:35 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in: Add test for "long long" support.
+	* configure: Regenerate with autoconf.
+	* acconfig.h: Add CC_HAS_LONG_LONG
+	* config.in: Regenerate with autoheader.
+	* config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove
+	* config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove.
+	* config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove.
+	* config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove.
+	* config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove
+	(PRINTF_HAS_LONG_LONG): Remove.
+	(FORCE_LONG_LONG): Remove.
+	* config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version.
+	* config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove
+	(PRINTF_HAS_LONG_LONG): Remove.
+	* config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove.
+	(PRINTF_HAS_LONG_LONG): Remove.
+	* config/pa/tm-hppa.h (GET_FIELD): Put parens around
+	subtraction inside shift.  Put parens around subtraction
+	in operand of bitwise and.
+	(struct frame_info): Forward declare
+ 	if __STDC__ defined.
+	(frame_saved_regs): Ditto.
+	(struct value): Ditto.
+	(struct type): Ditto.
+	(struct inferior_status): Ditto.	
+	(init_extra_frame_info): Add prototype.
+	(skip_prologue): Ditto.
+	(frameless_function_invocation): Ditto.
+	(frame_chain): Ditto.
+	(frame_chain_valid): Ditto.
+	(saved_pc_after_call): Ditto.
+	(hppa_fix_call_dummy): Ditto.	
+	(hppa_push_arguments): Ditto.
+	(pa_do_registers_info): Ditto.
+	(in_solib_call_trampoline): Ditto.
+	(in_solib_return_trampoline): Ditto.
+	(push_dummy_frame): Ditto.
+	* convex-tdep.c (decout): Use print_longest rather than
+	fprintf_filtered.
+	* defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set
+	CC_HAS_LONG_LONG.
+	(INT_MIN): Fix so it works correctly when assigned to a long long.
+	* valprint.c (longest_to_int): Rewrite to remove dependence
+	on INT_MIN and INT_MAX.
+	(print_longest): Rewrite the code that falls back to synthesized
+	hex output when LONGEST value is not representable as in a long and
+ 	printf doesn't support printing long longs.
+	* ch-valprint.c (chill_val_print): Cast 2nd arg of
+	chill_print_type_scalar to LONGEST.
+	chill_print_type_scalar): Make static and add prototype.
+	* hppa-tdep.c (get_field): Ifdef out unused function.
+	(set_field): Ditto.
+	(extract_3): Ditto.
+	(extract_5_store): Ditto.
+	(extract_11): Ditto.
+	(extract_12): Ditto.
+	(deposit_17): Ditto.
+	(extract_14): Convert to static and add prototype.
+	(deposit_14): Ditto.
+	(extract_21): Ditto.
+	(deposit_21): Ditto.
+	(extract_17): Ditto.
+	(extract_5r_store): Ditto.
+	(extract_5R_store): Ditto.
+	(extract_5_load): Ditto.
+	(find_proc_framesize): Ditto.
+	(find_dummy_frame_regs): Ditto.
+	(sign_extend): Ditto.
+	(find_unwind_entry): Add prototype.
+	(find_return_regnum): Ditto.
+	(unwind_command): Ditto.
+	(find_dummy_frame_regs): Add parens around subtraction in operand
+	of bitwise-and.
+	(skip_prologue): Add parens around operands of logical-and inside
+	operand of logical-or.
+	(sign_extend): Add parens around operands of subtraction inside
+	operand of shift.
+	(low_sign_extend): Ditto.
+	* top.c (filename_completer): Convert old style decl of
+	filename_completion_function into prototype.
+	* f-lang.c (patch_common_entries): Ifdef out unused function.
+	* stabsread.c (read_cfront_baseclasses): Remove unused local
+	variable "msg_noterm".
+	(resolve_cfront_continuation): Remove unused local variable "fip".
+	(read_type): Remove unused variable xtypenums.
+	(read_cfront_static_fields): Remove unused variable "i".
+	(read_cfront_static_fields): Remove unused variable "nfields".
+	(read_cfront_member_functions): Add missing comment terminator.
+	(read_cfront_static_fields): Return 1 rather than random value.
+	(read_cfront_baseclasses): Ditto.
+	(read_cfront_baseclasses): Ditto.
+	(read_cfront_baseclasses): Ditto.
+	* somsolib.c (som_solib_create_inferior_hook): Remove unused
+	variable "u".
+	(som_solib_create_inferior_hook): Remove unused variable
+	shadow_contents.
+	(language.h): Add for needed prototypes.
+	(som_solib_sharedlibrary_command): Add prototype.
+	* hpread.c: (hpread_read_array_type): Add prototype.
+	* somread.c (hpread_build_pysmtabs): Add prototype.
+	(hpread_symfile_finish): Ditto.
+	(hpread_symfile_init): Ditto.
+	* hppah-nat.c (fetch_register): Convert old style decl
+	to prototype.
+	(gdbcore.h): Include for needed prototypes.
+	(fetch_register): Remove unused variable "mess".
+	* remote-pa.c (get_offsets): Ifdef out unused function.
+	(remote_start_remote): Remove unused variable "timeout".
+	(boot_board): Add prototype.
+	(reaad_frame): Add prototype.
+	(getpkt): Remove unused variable "bp".
+	(remote_kill): Add prototype.
+	(remote_mourn): Add prototype.
+	(remote_insert_breakpoint): Add prototype.
+	(remote_remove_breakpoint): Add prototype.
+	* valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined.
+	* infcmd.c (do_registers_info): Only need prototype if
+	DO_REGISTERS_INFO is not defined.
+	(breakpoint_auto_delete_contents): Only need if
+	CALL_DUMMY_BREAKPOINT_OFFSET is defined.
+
+Sat Jul 27 08:49:49 1996  Fred Fish  <fnf@cygnus.com>
+
+	* xcoffread.c (xcoff_end_psymtab): Add textlow_not_set parameter.
+	(END_PSYMTAB): Ditto.
+	(scan_xcoff_symtab): Call xcoff_end_psymtab with textlow_not_set.
+
+Fri Jul 26 14:07:37 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* printcmd.c (_initialize_printcmd): Initialize
+	tm_print_insn_info.flavour.
+
+Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (scm-valprint.o): Depends upon gdbcore_h.
+	(arm-tdep.o): Ditto.
+	(dcache.o): Ditto.
+	(i386ly-tdep.o): Ditto.
+	(i960-tdep.o): Ditto.
+	(m68k-tdep.o): Ditto.
+	(nindy-tdep.o): Ditto.
+	(scm-lang.o): Ditto.
+	(w65-tdep.o): Ditto.
+	(z8k-tdep.o): Ditto.
+	(m68k-tdep.o): Depends upon value_h and gdb_string.h
+	(m2-valprint.o): Depends upon m2-lang.h.
+	(sparc-tdep.o): Depends upon gdb_string.h
+	(valprint.o): Depends upon valprint.h
+	
+	* remote-e7000.c (notice_quit): Remove prototype.
+	* top.c (initialize_targets): Remove prototype, now in target.h.
+	* stabsread.c (resolve_cfront_continuation): Remove prototype.
+	* dbxread.c (resolve_cfront_continuation): Remove prototype.
+	* symfile.h (set_demangling_style): Remove prototype.
+	* config/tm-sysv4.h (in_plt_section): Remove prototype, in objfiles.h.
+	* config/sparc/tm-sparc.h (single_step): Remove extern decl, now in
+ 	target.h.
+	* config/arc/tm-arc.h (one_stepped, single_step): Remove extern decls,
+ 	now in target.h.
+	* ser-unix.c (hardwire_restore): Remove obsolete prototype.
+	* sparc-tdep.c (single_step): Remove forward decl of isbranch.
+	* scm-lang.c (find_function_in_inferior): Remove prototype.
+	(value_allocate_space_in_inferior): Ditto.
+	* infrun.c (write_pc_pid): Remove prototype, now in inferior.h.
+	* defs.h (strchr): Remove declarations, they are declared in
+ 	gdb_string.h also.
+	(strrchr): Ditto.
+ 	(strstr): Ditto.
+ 	(strtok): Ditto.
+ 	(strerror): Ditto.
+	* f-valprint.c (f77_print_array_1): Remove extra arg that was being
+	passed to f77_print_array_1.
+	* gdbtypes.c (add_name): Remove unused variables lenstrlen and lenstr.
+	* scm-exp.c (scm_istr2int): Remove unused variable "j".
+	(scm_parse): Remove unused variable "str".
+	* hp300ux-nat.c (store_inferior_register): Remove unused variable
+ 	"buf".
+	(store_inferior_registers): Remove unnecessary decl "registers".
+	* m68k-tdep.c (m68k_pop_frame): Remove unused variable "fi".
+	* scm-lang.c (scm_get_field): Remove unused variable "val".
+	(scm_lookup_name): Remove unused variable "symval".
+	* objfiles.c (map_to_file): Remove unused local variable "tempfd".
+	* procfs.c (do_attach, do_detach): Remove unused variable "result".
+	(last_resume_pid): Remove unused static variable.
+	* alpha-tdep.c (alpha_linux_sigtramp_offset): Remove unused variable
+	"res".
+	* objfiles.c (map_to_address): Remove unused function.
+	* f-valprint.c (print_max): Remove extraneous extern decl,
+ 	in valprint.h.
+	(calc_f77_array_dims): Remove extraneous prototype, in f-lang.h.
+	* ch-exp.c (write_lower_upper_value): Remove prototype for
+	type_lower_upper.
+
+	* gdbtypes.c (cfront_mangle_name): #ifdef out unused function.
+	* ch-exp.c (parse_mode_call): Ditto.
+	* f-valprint.c (there_is_a_visible_common_named): Ditto.
+	* f-lang.c (clear_function_list): Ditto.
+	(get_bf_for_fcn): Ditto.
+ 	(clear_bf_list): Ditto.
+ 	(add_common_block): Ditto.
+	(patch_all_commons_by_name): Ditto.
+ 	(find_first_common_named): Ditto.
+ 	(add_common_entry): Ditto.
+	(allocate_saved_function_node): Ditto.
+ 	(allocate_saved_bf_node): Ditto.
+	(allocate_common_entry_node): Ditto.
+	(allocate_saved_f77_common_node): Ditto.
+	
+	* arm-tdep.c (gdbcore.h): Include for necessary prototypes.
+	* dcache.c (gdbcore.h): Ditto.
+	* i386ly-tdep.c (gdbcore.h): Ditto.
+	* i960-tdep.c (gdbcore.h): Ditto.
+	* m2-valprint.c (m2-lang.h): Ditto.
+	* m68k-tdep.c (gdbcore.h): Ditto.
+	(value.h): Ditto.
+	(gdb_string.h): Ditto.
+	* nindy-tdep.c (gdbcore.h): Ditto.
+	* scm-lang.c (gdbcore.h): Ditto.
+	* scm-valprint.c (gdbcore.h): Ditto.
+	* w65-tdep.c (gdbcore.h): Ditto.
+	* z8k-tdep.c (gdbcore.h): Ditto.
+	* sparc-tdep.c (gdb_string.h): Include.
+	* valprint.c (valprint.h): Include.
+
+	* config/xm-lynx.h: Remove part of comment about INT_MIN
+	redefined warnings from defs.h, since INT_MIN define in
+	defs.h is now protected by #ifndef INT_MIN.
+	* config/i386/xm-i386bsd.h: Ditto.
+	* config/m68k/xm-hp300bsd.h: Ditto.
+	* config/m68k/xm-news.h: Ditto.
+
+	* config/pa/xm-hppah.h (INT_MIN): Remove bogus INT_MIN
+	definition as 0x80000000.  The macro in defs.h is better.
+	* config/i386/xm-i386m3.h (INT_MIN): Ditto.
+	* config/i386/xm-i386mach.h (INT_MIN): Ditto.
+	* config/ns32k/xm-ns32km3.h (INT_MIN): Ditto.
+	* config/pa/xm-hppab.h: Ditto.
+
+	* core-aout.c (fetch_core_registers): Add prototype.
+	* hp300ux-nat.c (fetch_inferior_register): Ditto.
+	(store_inferior_register_1): Ditto.
+	(store_inferior_register): Ditto.
+	* config/m68k/tm-m68k.h (find_saved_regs): Ditto.
+	*scm-valprint.c (c_val_print): Ditto.
+	* procfs.c (add_fd): Ditto.
+	(remove_fd): Ditto.
+	(wait_fd): Ditto.
+	(sigcodename): Ditto.
+	(sigcodedesc): Ditto.
+	(procfs_kill_inferior): Ditto.
+	(procfs_xfer_memory): Ditto.
+ 	(procfs_store_registers): Ditto.
+	(create_procinfo): Ditto.
+ 	(procfs_init_inferior): Ditto.
+ 	(proc_set_exec_trap): Ditto.
+	(procfs_attach): Ditto.
+ 	(procfs_detach): Ditto.
+ 	(procfs_prepare_to_store): Ditto.
+	(procfs_files_info): Ditto.
+ 	(procfs_open): Ditto.
+ 	(procfs_wait): Ditto.
+ 	(procfs_fetch_registers): Ditto.
+	(procfs_mourn_inferior): Ditto.
+ 	(procfs_can_run): Ditto.
+ 	(procfs_thread_alive): Ditto.
+	(procfs_stop): Ditto.
+	* alpha-nat.c (fetch_core_registers): Ditto.
+	* config/alpha/tm-alpha.h (alpha_osf_skip_sigtramp_frame): Ditto.
+	* objfiles.c (ecoff_relocate_efi): Ditto.
+	* inflow.c (pass_signal): Ditto.
+	(handle_sigio): Ditto.
+	* annotate.c (breakpoint_changed): Ditto.
+	* callback.c (wrap): Ditto.
+	(fdbad): Ditto.
+ 	(fdmap): Ditto.
+	* utils.c (malloc_botch): Ditto.
+	(fputs_maybe_filtered): Ditto.
+	(vfprintf_maybe_filtered): Ditto.
+	* defs.h (notice_quit): Ditto.
+	* defs.h (xmalloc, xrealloc): Ditto.
+	* top.c (stop_sig): Ditto.
+	(init_signals): Ditto.
+ 	(user_defined_command): Ditto.
+ 	(source_cleanup_lines): Ditto.
+	(dont_repeat_command): Ditto.
+	(serial_log_command): Ditto.
+	(disconnect): Ditto.
+	* target.h (initialize_targets): Ditto.
+	* os9kread.c (read_minimal_symbols): Ditto.
+	* mdebugread.c (mdebug_psymtab_to_symtab): Ditto.
+	(fdr_name): Ditto.
+ 	(push_parse_stack): Ditto.
+	(pop_parse_stack): Ditto.
+ 	(is_pending_symbol): Ditto.
+ 	(add_pending): Ditto.
+	* serial.c (serial_logchar): Ditto.
+	(serial_interface_lookup): Ditto.
+	* serial.h (serial_log_command): Ditto.
+	* f-valprint.c (info_common_command): Ditto.
+	* gdbtypes.h (print_type_scalar): Ditto.
+	* scm-valprint.c (scm_scmlist_print): Ditto.
+	(scm_ipruk): Ditto.
+	* scm-lang.c (scm_printstr): Ditto.
+	(in_eval_c): Ditto.
+ 	(evaluate_subexp_scm): Ditto.
+	* scm-exp.c (scm_read_token): Ditto.
+	(scm_skip_ws): Ditto.
+ 	(scm_lreadparen): Ditto.
+	* m2-lang.c (emit_char): Ditto.
+	(m2_printchar): Ditto.
+ 	(m2_printstr): Ditto.
+	(m2_create_fundamental_type): Ditto.
+	* f-lang.c (emit_char): Ditto.
+	(f_printchar): Ditto.
+ 	(f_printstr): Ditto.
+	(f_create_fundamental_type): Ditto.
+	* ch-lang.c (chill_printchar): Ditto.
+	(chill_printstr): Ditto.
+	(chill_create_fundamental_type): Ditto.
+ 	(value_chill_length): Ditto.
+ 	(value_chill_card): Ditto.
+	(value_chill_max_min): Ditto.
+ 	(evaluate_subexp_chill): Ditto.
+	* ch-exp.c (PEEK_TOKEN): Ditto.
+	(peek_token_): Ditto.
+ 	(forward_token_): Ditto.
+ 	(parse_case_label): Ditto.
+	(parse_opt_untyped_expr): Ditto.
+ 	(parse_unary_call): Ditto.
+ 	(parse_call): Ditto.
+	(parse_named_record_element): Ditto.
+ 	(parse_tuple_element): Ditto.
+	(parse_opt_element_list): Ditto.
+ 	(parse_tuple): Ditto.
+ 	(parse_primval): Ditto.
+ 	(parse_operand6): Ditto.
+	(parse_operand5): Ditto.
+ 	(parse_operand4): Ditto.
+ 	(parse_operand3): Ditto.
+ 	(parse_operand2): Ditto.
+	(parse_operand1): Ditto.
+ 	(parse_operand0): Ditto.
+ 	(parse_expr): Ditto.
+ 	(parse_then_alternative): Ditto.
+	(parse_else_alternative): Ditto.
+ 	(parse_if_expression): Ditto.
+ 	(parse_untyped_expr): Ditto.
+	(growbuf_by_size): Ditto.
+ 	(match_simple_name_string): Ditto.
+ 	(decode_integer_value): Ditto.
+	(decode_integer_literal): Ditto.
+ 	(match_float_literal): Ditto.
+ 	(match_float_literal): Ditto.
+	(match_string_literal): Ditto.
+ 	(match_character_literal): Ditto.
+ 	(match_integer_literal): Ditto.
+	(match_bitstring_literal): Ditto.
+ 	(write_lower_upper_value): Ditto.
+	* ch-lang.h (type_lower_upper): Ditto.
+	* c-lang.c (emit_char): Ditto.
+	* dwarfread.c (free_utypes): Ditto.
+	* stabsread.h (resolve_cfront_continuation): Ditto.
+	* stabsread.c (get_substring): Ditto.
+	(read_one_struct_field): Ditto.
+	* stabsread.h (process_later): Ditto.
+	* demangle.c (set_demangling_command): Ditto.
+	* defs.h (set_demangling_style): Ditto.
+	* maint.c (maintenance_info_command): Ditto.
+	(print_section_table): Ditto.
+	(maintenance_info_sections): Ditto.
+ 	(maintenance_print_command): Ditto.
+	* symtab.h (maintenance_print_statistics): Ditto.
+	* objfiles.h (in_plt_section): Ditto.
+	* objfiles.c (add_to_objfile_sections): Ditto.
+	* bcache.c (hash): Ditto.
+	(lookup_cache): Ditto.
+	* exec.c (bfdsec_to_vmap): Ditto.
+	(ignore): Ditto.
+	* f-exp.y (growbuf_by_size, match_string_literal): Ditto.
+	* language.c (unk_lang_printchar): Ditto.
+	(unk_lang_printstr): Ditto.
+	(unk_lang_create_fundamental_type): Ditto.
+ 	(unk_lang_print_type): Ditto.
+	(unk_lang_val_print): Ditto.
+ 	(unk_lang_value_print): Ditto.
+	* target.c (update_current_target): Ditto.
+	(debug_to_open): Ditto.
+ 	(debug_to_close): Ditto.
+	(debug_to_attach): Ditto.
+ 	(debug_to_detach): Ditto.
+ 	(debug_to_resume): Ditto.
+ 	(debug_to_wait): Ditto.
+	(debug_to_fetch_registers): Ditto.
+ 	(debug_to_store_registers): Ditto.
+ 	(debug_to_prepare_to_store): Ditto.
+ 	(debug_to_xfer_memory): Ditto.
+ 	(debug_to_files_info): Ditto.
+ 	(debug_to_insert_breakpoint): Ditto.
+	(debug_to_remove_breakpoint): Ditto.
+ 	(debug_to_terminal_init): Ditto.
+	(debug_to_terminal_inferior): Ditto.
+ 	(debug_to_terminal_ours_for_output): Ditto.
+	(debug_to_terminal_ours): Ditto.
+ 	(debug_to_terminal_info): Ditto.
+ 	(debug_to_kill): Ditto.
+	(debug_to_load): Ditto.
+ 	(debug_to_lookup_symbol): Ditto.
+ 	(debug_to_create_inferior): Ditto.
+	(debug_to_mourn_inferior): Ditto.
+ 	(debug_to_can_run): Ditto.
+ 	(debug_to_notice_signals): Ditto.
+	(debug_to_thread_alive): Ditto.
+ 	(debug_to_stop): Ditto.
+	* breakpoint.h (set_breakpoint_sal): Ditto.
+	* remote-utils.c (usage): Ditto.
+	* remote.c (set_thread): Ditto.
+	(remote_thread_alive): Ditto.
+	(get_offsets): Ditto.
+	(read_frame): Ditto.
+	(remote_insert_breakpoint): Ditto.
+	(remote_remove_breakpoint): Ditto.
+	* sparc-nat.c (fetch_core_registers): Ditto.
+	* corelow.c (add_to_thread_list): Ditto.
+	(ignore): Ditto.
+	* inftarg.c (proc_wait): Ditto.
+	* infptrace.c (udot_info): Ditto.
+	(fetch_register): Ditto.
+	* ser-unix.c (hardwire_noflush_set_tty_state): Ditto.
+	(hardwire_print_tty_state): Ditto.
+	(hardwire_flush_output): Ditto.
+	(hardwire_flush_input): Ditto.
+	(hardwire_send_break): Ditto.
+	(hardwire_setstopbits): Ditto.
+	* ser-tcp.c (tcp_return_0): Ditto.
+	(tcp_noflush_set_tty_state): Ditto.
+	(tcp_print_tty_state): Ditto.
+	* solib.c (match_main): Ditto.
+	* gdbtypes.c (print_bit_vector): Ditto.
+	(print_arg_types): Ditto.
+	(dump_fn_fieldlists): Ditto.
+	(print_cplus_stuff): Ditto.
+	* symfile.h (entry_point_address): Ditto.
+	* symfile.c (decrement_reading_symtab): Ditto.
+	* valops.c (value_arg_coerce): Ditto.
+	* value.h (find_function_in_inferior): Ditto.
+	(value_allocate_space_in_inferior): Ditto.
+	* values.c (vb_match): Ditto.
+	* thread.c (info_thread_command): Ditto.
+	(restore_current_thread): Ditto.
+	(thread_apply_all_command): Ditto.
+	(thread_apply_command): Ditto.
+	* inferior.h (write_pc_pid): Ditto.
+	* infrun.c (delete_breakpoint_current_contents): Ditto.
+	* breakpoint.c (print_it_normal): Ditto.
+	(watchpoint_check): Ditto.
+	(print_it_done): Ditto.
+	(print_it_noop): Ditto.
+	(maintenance_info_breakpoints): Ditto.
+	(create_longjmp_breakpoint): Ditto.
+	(hbreak_command): Ditto.
+	(thbreak_command): Ditto.
+	(watch_commnd_1): Ditto.
+	(rwatch_command): Ditto.
+	(awatch_command): Ditto.
+	(do_enable_breakpoint): Ditto.
+	* ch-valprint.c (chill_val_print_array_elements): Ditto.
+	* eval.c (evaluate_subexp): Ditto.
+	(get_label): Ditto.
+	(evaluate_struct_tuple): Ditto.
+	* eval.c (init_array_element): Ditto.
+
+	* alpha-tdep.c (push_sigtramp_desc): Add prototype and make static.
+	* breakpoint.c (hw_breakpoint_used_count): Ditto.
+	(hw_watchpoint_used_count): Ditto.
+	* findvar.c (write_register_gen): Ditto.
+	(read_register_pid): Ditto.
+	* symtab.c (cplusplus_hint): Ditto.
+	* infcmd.c (breakpoint_auto_delete_contents): Ditto.
+	* ch-valprint.c (chill_print_type_scalar): Ditto.
+	* gdbtypes.c (add_name): Ditto.
+	(add_mangled_type): Ditto.
+	(cfront_mangle_name): Ditto.
+	* sparc-tdep.c (isbranch): Ditto.
+	* inftarg.c (child_stop): Ditto.
+	* win32-nat.c (child_stop): Ditto.
+	* mac-nat.c (child_stop): Ditto.
+	* remote-utils.c (sr_com): Ditto.
+	* dbxread.c (process_now): Ditto.
+	* ch-exp.c (require): Ditto.
+	(check_token): Ditto.
+	(expect): Ditto.
+	(parse_mode_call): Ditto.
+	(parse_mode_or_normal_call): Ditto.
+	* scm-lang.c (scm_lookup_name): Ditto
+	* f-lang.c (allocate_saved_bf_node): Ditto.
+	(allocate_saved_function_node): Ditto.
+	(allocate_saved_f77_common_node): Ditto.
+ 	(allocate_common_entry_node): Ditto.
+	(add_common_block): Ditto.
+ 	(add_common_entry): Ditto.
+ 	(find_first_common_named): Ditto.
+	(patch_common_entries): Ditto.
+ 	(patch_all_commons_by_name): Ditto.
+ 	(clear_bf_list): Ditto.
+	(get_bf_for_fcn): Ditto.
+ 	(clear_function_list):  Ditto.
+	* scm-exp.c (scm_istr2int): Ditto.
+	(scm_istring2number): Ditto.
+	* scm-valprint.c (scm_inferior_print): Ditto.
+	* f-typeprint.c (print_equivalent_f77_float_type): Ditto.
+	* f-valprint.c (f77_get_dynamic_length_of_aggregate): Ditto.
+	(f77_create_arrayprint_offset_tbl): Ditto.
+ 	(f77_print_array_1): Ditto.
+ 	(f77_print_array): Ditto.
+	(list_all_visible_commons): Ditto.
+ 	(there_is_a_visible_common_named): Ditto.
+	* mdebugread.c (ecoff_relocate_efi): Ditto.
+	* callback.c (os_close): Ditto.
+	(os_get_errno): Ditto.
+ 	(os_isatty): Ditto.
+ 	(os_lseek): Ditto.
+ 	(os_open): Ditto.
+	(os_read): Ditto.
+ 	(os_read_stdin): Ditto.
+ 	(os_write): Ditto.
+ 	(os_write_stdout): Ditto.
+ 	(os_rename): Ditto.
+	(os_system): Ditto.
+ 	(os_time): Ditto.
+ 	(os_unlink): Ditto.
+ 	(os_shutdown): Ditto.
+ 	(os_init): Ditto.
+	(os_printf_filtered): Ditto.
+
+	* scm-lang.h (scm_parse): Change old style decl to prototype.
+	* config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Ditto.
+	* top.c (init_proc): Ditto.
+	(query_hook): Ditto.
+	(error_hook): Ditto.
+	* f-lang.c (c_value_print): Ditto.
+	* ch-exp.c (parse_expression): Ditto.
+	(parse_primval): Ditto.
+ 	(parse_untyped_expr): Ditto.
+	(parse_opt_untyped_expr): Ditto.
+ 	(ch_lex): Ditto.
+	* config/sparc/tm-sparc.h (sparc_init_extra_frame_info): Ditto.
+	(sparc_frame_saved_pc): Ditto.
+	(sparc_push_dummy_frame): Ditto.
+	(sparc_pop_frame): Ditto.
+	* defs.h (fclose): Ditto.
+	(atof): Ditto.
+ 	(error_hook): Ditto.
+
+	* arc-tdep.c (single_step): Change arg to type "enum target_signal".
+	* rs6000-tdep.c (single_step): Ditto.
+	* sparc-tdep.c (single_step): Ditto.
+
+	* breakpoint.c (cleanup_executing_breakpoints): Change unused arg type
+	to PTR which is what make_cleanup expects.
+	* utils.c (null_cleanup): Change arg type to PTR.
+	* defs.h (null_cleanup): Change prototype to match actual function.
+	* config/sparc/tm-sparc.h (struct frame_info): Move forward decl.
+	* ch-valprint.c (chill_val_print): Cast 2nd arg of
+	chill_print_type_scalar to LONGEST.
+	* infrun.c (wait_for_inferior): Have empty switch case for
+	BPSTAT_WHAT_CHECK_SHLIBS when SOLIB_ADD is not defined.
+	(stop_on_solib_events): Only needed if SOLIB_ADD is defined.
+	* infcmd.c (attach_command): Only need auto_solib_add if SOLIB_ADD
+	is defined.
+	* symfile.c (generic_load): Scan long int using a long int spec,
+	not an int spec.
+	* infptrace.c (udot_info): Only need local variables if	KERNEL_U_SIZE
+ 	is defined.
+	(fetch_register): Only need function if FETCH_INFERIOR_REGISTERS is
+ 	not defined.
+	* inflow.c (handle_sigio): Only need prototype when the actual
+	function is compiled in.
+	* valprint.c (longest_to_int): Expand error message to be
+	separate messages for args larger than largest signed int
+	and args smaller than smallest signed int.
+	* valprint.c (print_longest): Fix problems with support for case
+	where compiler supports type "long long" but the runtime doesn't
+	support printing them with "%ll".
+	* scm-valprint.c (scm_scmlist_print, scm_scmval_print): Change
+ 	return types to void since we don't actually return anything
+ 	meaningful and callees ignore the values anyway.
+	* procfs.c (modify_inherit_on_fork_flag): Enclose pr_flags in PIOCSET
+	ifdef.
+	(modify_run_on_last_close_flag): Ditto.
+	(wait_fd): Enclose local variables "num_fds" and "i" LOSING_POLL
+	ifdef
+	* alpha-tdep.c (push_sigtramp_desc): Return proc_desc rather than
+ 	random value.
+	* infrun.c (wait_for_inferior): Ensure random_signal is not used
+	uninitialized.
+	* valops.c (call_function_by_hand): Ensure struct_addr is not used
+	uninitialized.
+	* breakpoint.c (watch_command_1): Ensure prev_frame is not used
+	uninitialized.
+	* utils.c (vfprintf_maybe_filtered): Change second arg from "char *"
+	to "const char *".
+	* infptrace.c (udot_info): Add two dummy args so that the type is
+	correct for passing to add_info.
+	* f-lang.c (saved_fcn): Move decl to head of file so it can be used
+ 	in prototypes.
+ 	(saved_bf_symnum): Ditto.
+ 	(SAVED_FUNCTION): Ditto.
+	(SAVED_FUNCTION_PTR): Ditto.
+ 	(SAVED_BF): Ditto.
+ 	(SAVED_BF_PTR): Ditto.
+	* ch-exp.c (parse_named_record_element): Build error message in
+	temporary buffer before passing it to expect, rather than passing
+	wrong number of args to expect.
+	* demangle.c (set_demangling_style): Call set_demangling_command with
+	correct number of arguments.
+	* inferior.h (terminal_init_inferior_with_pgrp): Change arg type to
+	int to match actual function.
+	(os_isatty): Call fdmap with right number of arguments, was missing
+	the host_callback* arg.
+	* target.c (cleanup_target): Prototype all functions casts.
+	* target.h (one_stepped, single_step): Declare here and convert
+	single_step to prototype.
+	* infrun.c (one_stepped, single_step): Don't declare externs
+	here, they have moved to target.h.
+ 	* eval.c (init_array_element): Declare previously undeclared
+	last two args as LONGEST.
+	* dcache.c (dcache_xfer_memory):  Change xfunc decls to prototype form.
+
+Thu Jul 25 16:11:54 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* dsrec.c (load_srec): Protect ANSI style function parms with PARAMS.
+
+Mon Jul 22 18:13:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (os9kread.o):  Remove dependency on partial-stab.h.
+	* dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h:  Don't
+	use partial_symtab->textlow==0 as a flag, as 0 is a legitimate
+	text address.  Use a seperate flag (textlow_not_set) instead.
+	This makes stabs in ELF .o files work a lot better.
+	* mdebugread.c xcoffread.c:  Define textlow_not_set for
+	partial-stab.h.
+	* stabsread.h (end_psymtab):  Add textlow_not_set arg to prototype.
+
+Sat Jul 20 10:41:06 1996  Fred Fish  <fnf@cygnus.com>
+
+	* dwarf2read.c (struct filenames): Change internal "struct file"
+	to "struct fileinfo" to avoid conflict with "struct file" in
+	<sys/file.h> on HPUX and Solaris.
+
+Fri Jul 19 14:05:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dwarf2read.c: New file, DWARF 2 reader originally contributed by
+	Brent Benson, with additions by Gary Funck and Jerry Kreuscher.
+	* Makefile.in (COMMON_OBS): Add dwarf2read.o.
+	(SFILES): Add dwarf2read.c.
+	(dwarf2read.o): Add build rule.
+	* symfile.h (dwarf2_has_info, dwarf2_build_psymtabs): Declare
+	exported functions.
+	* elfread.c (elf_symfile_read): Call them.
+	(elf_symtab_read) [HARRIS_TARGET]: Skip some special symbols.
+
+Thu Jul 18 01:22:01 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* symfile.c (symfile_bfd_open): 
+	* exec.c (exec_file_command): for __GO32__ and __WIN32__ systems,
+	free the user from having to type the .exe extension.
+
+Wed Jul 17 06:54:50 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mon960-rom.c: Shorten the mon960_inits string to a single
+	carriage return; this prevents a hang on connecting immediately
+	after powerup, when MON960 is attempting autobaud detection.
+
+Tue Jul 16 23:47:04 1996  Mark Alexander  <marka@cygnus.com>
+
+	* a29k-tdep.c (get_saved_register): Allow PC to be modified
+	when innermost frame is selected, but not in outer frames.
+
+Tue Jul 16 23:37:25 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* command.c (do_setshow_command):  Don't segfault when showing
+	var_string and var_string_noescape vars that are NULL.
+
+Mon Jul 15 16:55:48 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* win32-nat.c (handle_load_dll): dos_path_to_unix_path renamed to
+	cygwin32_conv_to_posix_path.
+	(child_create_inferior): unix_path_to_dos_path renamed to
+	cygwin32_conv_to_win32_path.  Rewrite code to translate PATH.
+
+Mon Jul 15 16:44:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* defs.h printcmd.c:  Create global disassemble_info structure
+	tm_print_insn_info.
+	* i386-tdep.c (set_assembly_language_command):  set
+	tm_print_insn_info.mach to the appropriate value for 386 or 8086
+	disassembly.
+	* printcmd.c (print_insn):  Move init of disassembler_info to
+	_initialize_printcmd.  Set endian for disassembler here.
+	* sparc-tdep.c:  Set tm_print_insn_info.mach as appropriate to
+	select sparc/sparclite.
+	* config/sparc/{tm-sparc.h tm-sparclite.h}:  Get rid of
+	TM_PRINT_INSN.  Set TM_PRINT_INSN_MACH to
+	bfd_mach_sparc/bfd_mach_sparc_sparclite.
+
+Fri Jul 12 19:04:32 1996  Fred Fish  <fnf@cygnus.com>
+
+	* hpread.c (hpread_lookup_type): Use xmmalloc/xmrealloc rather
+	than xmalloc/xrealloc.
+
+Fri Jul 12 17:59:47 1996  Fred Fish  <fnf@cygnus.com>
+
+	* objfiles.c (map_to_file): Error return from mmalloc_findbase is
+	a NULL pointer, not a -1.
+
+Fri Jul 12 10:16:24 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* i386-tdep.c (set_assembly_language_command):  New routine to
+	select between i386 and i8086 instruction sets for disassembly.
+	New command `set assembly-language {i386 i8086}'.
+
+Thu Jul 11 21:13:21 1996  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.c (monitor_write_memory, monitor_read_memory_single):
+	Disable use of "long long" memory read/write commands; can't
+	use them because we hold the values to read/write in an int
+	variable, and because strtoul fails on values that exceed the
+	size of a long.  This fixes breakpoint problems on MON960.
+
+Thu Jul 11 11:39:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/m68k/xm-hp300hpux.h (HAVE_MMAP): Remove definition.
+	* config/pa/xm-hppah.h (HAVE_MMAP): Ditto.
+
+Wed Jul 10 16:54:41 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE
+	and MMALLOC_CHECK macros, and add comment indicating how host dependent
+	makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
+	to use it but to not do heap corruption checking.
+	* gdbserver/Makefile.in: Ditto.
+	* utils.c (init_malloc): Replace warning() use with direct call of
+	fprintf_unfiltered, since current_target has not yet been set and thus
+ 	we cannot use warning().  If we try to use mmcheck and it fails,
+	suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
+ 	defined.  Other small mmalloc related cleanups.
+	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
+	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
+
+	* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): 
+	* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
+	* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
+	Remove obsolete defines.
+
+	* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
+	* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
+	* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
+	* config/rs6000/aix4.mh (MMALLOC_DISABLE):
+	* config/powerpc/aix4.mh (MMALLOC_DISABLE):
+	* config/powerpc/aix.mh (MMALLOC_DISABLE):
+	* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
+	* config/mips/mipsm3.mh (MMALLOC_DISABLE):
+	* config/mips/decstation.mh (MMALLOC_DISABLE):
+	* config/m88k/cxux.mh (MMALLOC_DISABLE):
+	* config/i386/i386mk.mh (MMALLOC_DISABLE):
+	* config/i386/i386m3.mh (MMALLOC_DISABLE):
+	* config/i386/i386gnu.mh (MMALLOC_DISABLE):
+	Use MMALLOC_CFLAGS instead.
+
+Tue Jul  9 22:41:12 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* h8300-tdep.c: Remove some outdated comments.
+	(h8300_skip_prologue): Rework to be more correct for the H8/300H.
+	Handle stm.l insns for the H8/S.
+	(examine_prologue): Likewise.
+
+Tue Jul  9 16:48:55 1996  Raymond Jou  <rjou@mexican.cygnus.com>
+
+	* ser-mac.c (mac_close): Change a typo SetSetBuf to SerSetBuf.
+
+Mon Jul 08 08:50:39 1996  Mark Alexander  <marka@cygnus.com>
+
+	* mon960-rom.c (mon960_open): Add floating point detection to
+	prevent hang on non-FPU processors (PR 9775).
+	(mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem
+	setting breakpoints and improve loading speed.
+
+Sun Jul  7 14:57:34 1996  Fred Fish  <fnf@cygnus.com>
+
+	* coffread.c (record_minimal_symbol): Don't presave name string
+	on symbol_obstack before passing to prim_record_minimal_symbol.
+	It now handles saving the string itself.
+	* dbxread.c (read_dbx_dynamic_symtab): Ditto.
+	* mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
+	* os9kread.c (record_minimal_symbol): Ditto.
+	* solib.c (solib_add_common_symbols): Ditto.
+
+	* coffread.c (coff_symtab_read): Don't presave name string on
+	symbol_obstack before passing to prim_record_minimal_symbol_and_info.
+	It now handles saving the string itself.
+	* dbxread.c (record_minimal_symbol): Ditto.
+	* elfread.c (record_minimal_symbol_and_info): Ditto.
+	
+	* dstread.c (record_minimal_symbol): Remove static function that just
+	called prim_record_minimal_symbol with the same args (after change to
+ 	prim_record_minimal_symbol to do it's own name string saves).
+	* nlmread.c (record_minimal_symbol): Ditto.
+	* somread.c (record_minimal_symbol): Ditto.
+
+	* hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
+	(hpread_read_function_type): Ditto.
+	(hpread_process_one_debug_symbol): Ditto.
+	* mdebugread.c (parse_symbol): Ditto.
+	(new_symbol): Ditto.
+	* minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
+
+	* coffread.c (process_coff_symbol): Use obsavestring to save
+	SYMBOL_NAME, rather than obstack_copy0.
+	* dstread.c (create_new_symbol): Ditto
+	* symfile.c (obconcat): Ditto.
+	* stabsread.c (patch_block_stabs): Ditto.
+	* xcoffread.c (SYMNAME_ALLOC): Ditto.
+
+	* symfile.c (obsavestring): Update comments
+	* solib.c (solib_add_common_symbols): Remove local var origname.
+
+Wed Jul  3 15:56:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure:  Re-build with autoconf-2.10.
+
+	* sparcl-tdep.c (_initialize_sparc_tdep) config/sparc/tm-sparc.h,
+	config/sparc/tm-sparclite.h:  Initialize tm_print_insn from
+	TM_PRINT_INSN, which comes from the tm file.
+
+Tue Jul 02 21:41:20 1996  Mark Alexander  <marka@cygnus.com>
+
+	* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, 
+	os9kread.c: Replace identical sym_offsets functions with
+	default_symfile_offsets.
+	* somread.c (som_symfile_offsets): Use new SIZEOF_SECTION_OFFSETS
+	macro to allocate section_offsets.
+	* symfile.c (default_symfile_offsets): New function.
+	* symfile.h: Declare default_symfile_offsets.
+	* symtab.h: Define SIZEOF_SECTION_OFFSETS macro to
+	simplify allocation of section_offsets.
+
+Tue Jun 11 12:02:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (INTERNAL_LDFLAGS):  Add in flags from configure.
+	* configure configure.in:  Only make sol-thread.o for native.
+	Also, switch to dlopened libthread_db.so.1.
+	* sol-thread.c:  Switch to using dlopen to get the thread_db
+	library.
+
+Thu Jun 13 16:53:25 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure, configure.in:  Change test for libthread_db to only
+	work for configs where build/host/target are the same.
+
+Tue Jul  2 15:04:20 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/{linux.mh,xm-linux.h}: New files, for Linux on
+	PowerPC.
+
+	* configure.in (powerpc-*-linux): Add Linux, System V, and ELF
+	support.
+	* configure: Regenerate.
+
+Mon Jul  1 13:00:43 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Raymond Jou  <rjou@mexican.cygnus.com>:
+        * mpw-make.sed: Add lines to whack out autoconf hook
+        @CONFIG_LDFLAGS@.
+
+Mon Jul 01 11:07:15 1996  Mark Alexander  <marka@cygnus.com>
+
+	* remote-e7000.c (e7000_stop): New function.
+
+Fri Jun 28 06:34:19 1996  Dawn Perchik  <dawn@cygnus.com>
+
+	* configure, configure.in: Add target sparclet.
+	* monitor.h, monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM
+ 	(don't expect echo on setmem command), MO_RUN_FIRST_TIME (if
+ 	command to start process running on target is different from one
+ 	to continue execution), MO_HEX_PREFIX (if addresses from monitor
+ 	have a "0x" prefix).
+	* monitor.c, parse.c, sparc-tdep.c: Don't require strings in the
+ 	registers array.  This is to allow NULLs to be place holders in
+ 	the tm-*.h file so that only minor changes are needed when a new
+ 	processor is introduced (eg, one without floating point).
+	* sparc-tdep.c: Conditionally remove dependancies on floating
+ 	point.
+  	* sparclet-rom.c, config/sparc/sparclet.mt,
+ 	config/sparc/tm-sparclet.h: New files for target sparclet.
+	* symfile.c (load_command): Add option for 2nd parameter; a load
+ 	offset added to the vma of each section.
+
+Fri Jun 28 05:39:19 1996  Dawn Perchik  <dawn@cygnus.com>
+
+        * main.c (main): Add option "l" for setting remote_timeout.
+
+Fri Jun 28 05:25:18 1996  Dawn Perchik  <dawn@cygnus.com>
+
+        * remote-e7000.c, remote.c, target.h, top.c: Add set option
+ 	"remote_timeout" for setting remote_timeout.  Add set option
+ 	"use_hard_breakpoints" for setting hardware .vs. memory
+ 	breakpoints.
+
+Fri Jun 28 04:32:18 1996  Dawn Perchik  <dawn@cygnus.com>
+
+        * remote-e7000.c (e7000_parse_device): New function.
+	Add option "tcp_remote" to target command if using 
+	tcp to connect to a remote host which is then connected 
+	via serial port to the e7000 (for exampole, a port master).
+	(e7000_open): Change to call e7000_parse_device.
+
+Fri Jun 28 03:47:17 1996  Dawn Perchik  <dawn@cygnus.com>
+
+	* monitor.c (monitor_debug): Fix remotedebug buffering.
+
+Thu Jun 27 18:24:17 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/i386/cygwin32.mh, config/powerpc/cygwin32.mh
+	(NATDEPFILES): Add a space.
+
+Wed Jun 26 06:05:39 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* gdbtypes.c (create_array_type): If TYPE_LENGTH (result_type)
+	is zero, set TYPE_FLAG_TARGET_STUB to force reevaluation of the type.
+
+	* ch-exp.c (calculate_array_length): Function removed.
+
+Tue Jun 25 17:41:06 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
+
+	* remote-e7000.c (e7000_read_inferior_memory_large): New function.
+	(e7000_xfer_inferior_memory): Call it.
+
+Tue Jun 25 23:14:07 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
+
+	* gdb/gdbserver/Makefile.in (docdir): Removed.
+
+Tue Jun 25 22:05:38 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
+
+	* Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
+	Use autoconf set values.
+	(docdir): Removed.
+	* configure.in (AC_PREREQ): autoconf 2.5 or higher.
+	* nlm/Makefile.in (bindir, libdir, datadir, mandir, infodir, 
+	includedir): Use autoconf set values.
+	(docdir): Removed.
+	* nlm/configure.in (AC_PREREQ): autoconf 2.5 or higher.
+	* nlm/configure: Rebuilt.
+        * gdb/gdbserver/Makefile.in (datadir): Set to $(prefix)/share.
+
+Mon Jun 24 09:56:14 1996  Angela Marie Thomas (angela@cygnus.com)
+
+	* stabsread.c (read_cfront_member_functions): add type
+
+Sun Jun 23 23:40:48 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* win32-nat.c: #include <unistd.h>.
+	(unix_paths_to_dos_paths, dos_paths_to_unix_paths): Delete.
+	(child_create_inferior): Convert only env var PATH to win32 style.
+	(set_pathstyle_dos): Delete.
+	(_initialize_inftarg): Delete dos-path-style command.
+
+Thu Jun 20 13:42:23 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* configure.in: Revise sol-thread.o test.
+	* configure: Regenerated.
+
+	* source.c (find_source_lines): Reassign size to result of read.
+
+Tue Jun 18 16:25:54 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S.
+	(h8300_command): Likewise.
+	(set_machine): Likewise.
+	(set_machine_hook): Likewise.
+	(_initialize_h8300m): Likewise.
+
+	* config/h8300/tm-h8300.h (h8300smode): Declare.
+
+Sun Jun 16 15:21:51 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* somsolib.c (som_solib_create_inferior_hook): Handle tracking
+	of shl_load calls for hpux10.
+
+Thu Jun 13 11:16:10 1996  Tom Tromey  <tromey@thepub.cygnus.com>
+
+	* config.in: Regenerated.
+	* acconfig.h (HAVE_THREAD_DB_LIB): Added entry.
+
+	* configure: Regenerated.
+	* aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
+	avoid name clashes with SunOS headers.
+
+Tue Jun 11 19:52:50 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Michael Snyder <Michael_Snyder@next.com>:
+	* bcache.c (print_bcache_statistics): Avoid divide-by-zero
+	exception if one or more objfile has no symbols, such as when
+	a dynamic library has been stripped.
+
+Tue Jun 11 12:02:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (INTERNAL_LDFLAGS):  Add in flags from configure.
+	* configure configure.in:  Only make sol-thread.o for native.
+	Also, switch to dlopened libthread_db.so.1.
+	* sol-thread.c:  Switch to using dlopen to get the thread_db
+	library.
+
+Mon Jun 10 14:17:19 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h} (MMAP_BASE_ADDRESS):
+ 	Change from 0xE0000000 to 0xC0000000.
+
+Thu Jun  6 17:10:32 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/xm-solaris.h: Initial version of support for
+	Solaris on PowerPC.
+
+Wed Jun  5 01:52:57 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+ 	* configure.in (configdirs): Force 4100 builds to use 4300 GDB
+  	target.
+	* configure: Rebuild.
+
+	* config/mips/vr4300el.mt (SIM_OBS): Include simulator in
+ 	little-endian builds.
+	
+Mon Jun  3 11:48:29 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* inftarg.c (child_thread_alive): Protect declaration with
+	#ifndef CHILD_THREAD_ALIVE.
+
+	* source.c (find_source_lines): Check the time on the symtab's bfd if
+	it exists, else check the time on the exec_bfd.
+
+Thu May 30 09:43:17 1996  Mark Alexander <marka@cygnus.com>
+
+	* dsrec.c (make_srec):  Fix calculation of address size
+	to allow addresses less than 0x100.
+
+Thu May 30 04:24:09 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length.
+
+Tue May 28 16:15:47 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* remote-mips.c: cannot use EINVAL for breakpoint test since
+	its value varies for different hosts (e.g. go32's is 19, while
+	sunos is 22).  Changed to hardcoded 22 since that is what the
+	mips boards return.
+
+Tue May 28 11:14:58 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* configure: Regenerated.
+	* aclocal.m4 (CY_AC_PATH_TCLH): Don't use AC_TRY_RUN.
+	(CY_AC_PATH_TKH): Don't use AC_TRY_RUN.
+
+Sun May 26 16:56:35 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* solib.c (solib_absolute_prefix, solib_search_path): New variables.
+	(_initialize_solib): Add set/show commands for those variables.
+	(solib_map_sections): Implement searching using them.
+
+Sun May 26 14:14:49 1996  Fred Fish  <fnf@cygnus.com>
+
+	Changes from: David Mosberger-Tang  <davidm@azstarnet.com>
+
+	* NEWS:  Add Alpha Linux as a new native configuration.
+
+	* mdebugread.c (parse_symbol): When we find a malloc() symbol with
+ 	return type VOID, assume no debugging info is available for that
+ 	object file and patch the return value into VOID *.  Otherwise,
+	operations requiring an implicit call to malloc() will fail.
+
+	* infrun.c (wait_for_inferior): The criterion to detect entering a
+ 	sigtramp handler is now: (a) the current pc is inside a sigtramp
+ 	handler, (b) the previous pc is not in a sigtramp handler, and (c)
+ 	the current stack pointer is "inner" than the old one.  Condition
+	(c) is new to avoid mistaking a return from a signal handler into
+ 	sigtramp as a new sigtramp invocation.
+
+	* dcache.c (struct dcache_block): Declare addr as CORE_ADDR.  An
+ 	int may not be big enough to hold an address.
+	(dcache_hit): Ditto.
+	(dcache_peek_byte): Fix indentation.
+
+	* configure.in (alpha-*-linux*): Add target.
+	* configure: Rebuild
+
+	* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
+	(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
+	(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
+	(SIGCONTEXT_ADDR): Ditto.
+	(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
+
+	* config/alpha/alpha-linux.mh: New file.
+	* config/alpha/alpha-linux.mt: Ditto.
+	* config/alpha/nm-linux.h: Ditto.
+	* config/alpha/tm-alphalinux.h: Ditto.
+	* config/alpha/xm-alphalinux.h: Ditto.
+	* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
+	* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
+ 	xm-alphaosf.h.
+	* config/alpha/alpha-osf2.mh: Ditto.
+
+	* blockframe.c (find_pc_partial_function): Pass PC to
+ 	SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
+ 	that detect sigtramp code via designated code sequences (as is the
+ 	case for Linux/Alpha, for example).
+	
+	* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
+	to ignore new PC argument.
+	* config/m68k/tm-hp300bsd.h: Ditto.
+	* config/vax/tm-vax.h: Ditto.
+
+	* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
+	(alpha_osf_skip_sigtramp_frame): Ditto.
+	(push_sigtramp_desc): Ditto.
+	(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
+ 	sigcontext address from frame.
+	(alpha_saved_pc_after_call): When in sigtramp, use
+ 	alpha_frame_saved_pc() instead of read-register().
+	(after_prologue): When inside a dynamically generated sigtramp
+ 	function, there is no prologue, so return address of first
+ 	instruction.
+	(alpha_in_prologue): Fix typo in comment.
+	(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
+ 	whether we're inside a dynamicaly generated sigtramp function.  If
+ 	so, create and push and appropriate procedure descriptor.
+	(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
+ 	the frame past a sigtramp frame (if the current frame is indeed a
+ 	sigtramp function).
+	(init_extra_frame_info): Don't read next frame register off of
+ 	stack-pointer when inside a dynamiccaly generated sigtramp.
+	(alpha_pop_frame): Also unlink and destroy procedure descriptors
+ 	created for dynamically generated sigtramp functions.
+
+	* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
+ 	<alpha/ptrace.h> instead of <machine/reg.h>
+
+Tue Jul  2 13:58:10 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_validate_task_sc):
+	Give terminal to gdb while asking question.
+	(inf_resume): Don't validate the task suspend-count while execing.
+
+Thu Jun 13 11:04:52 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_validate_task_sc): Query user before clearing any
+	additional suspend count.
+	(S_proc_wait_reply, gnu_attach): Don't call inf_validate_task_sc.
+	(inf_resume): Call inf_validate_task_sc here.
+	(gnu_resume): Call inf_update_procs to ensure noticing new threads.
+
+Fri Jun  7 17:00:43 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (gnu_create_inferior: attach_to_child): Return PID.
+
+Thu May 23 15:13:56 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* h8300-tdep.c (IS_PUSH): Refine.
+	(IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints.
+	(IS_SUB4_SP, IS_SUBL_SP): New macros.
+	(h8300_skip_prologue): Handle H8/300H prologue code sequences.
+	(examine_prologue): Handle addresses from 0x010000 to 0xffffff
+	when in H8/300H mode.  Get the return pointer's address correctly
+	for the H8/300H.  Handle H8/300H prolouge code sequences.
+
+	* symfile.c (generic_load): Print the starting address
+	of the file just loaded.
+
+Thu May 23 12:09:52 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile.
+
+Tue May 21 11:53:56 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (bpstat_do_actions):  Avoid endless recursion
+	if a `source' command is contained in bs->commands.
+
+	* infrun.c (wait_for_inferior):  Update step_frame_address when
+	stepping into a new line.
+
+	From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab):
+	* breakpoint.c (breakpoint_1):  Add shlib_disabled case to
+	bpenables array.
+
+Mon May 20 22:52:00 1996  Mark Alexander  <marka@cygnus.com>
+
+	* dsrec.c (load_srec): Add WAITACK parameter, for machines
+	like EST visionICE that send back an ACK after each S-record.
+	* monitor.c (monitor_wait_srec_ack): New function.
+	(monitor_load): Pass monitor_wait_srec_ack to load_srec
+	if the monitor's MO_SREC_ACK flag is set.
+	* monitor.h: Define MO_SREC_ACK flag.
+	* remote-est.c (est_cmds): Add MO_SREC_ACK flag.
+	* sh3-rom.c (sh3_load): Accomodate change in load_srec prototype.
+	* srec.h: Add WAITACK parameter to load_srec prototype.
+
+Sun May 19 21:22:00 1996  Rob Savoye  <rob@chinadoll>
+
+	* config/sparc/sparclite.mt: Add the sparc simulator.
+
+Sun May 19 16:49:37 1996  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h (read_command_lines, query_hook): Update prototypes.
+	(readline_begin_hook, readline_hook, readline_end_hook): Declare.
+	* breakpoint.c (commands_command): Build message in temporary buffer
+	and pass that, as well as tty control flag, to read_command_lines.
+	* top.c (readline_begin_hook, readline_hook, readline_end_hook):
+	Define here.
+	(command_loop): Check for non-NULL instream before looping.
+	(command_line_input): Use readline_hook when appropriate, to get
+	user input from a GUI window.
+	(read_next_line): Also build prompt if getting user input from a GUI.
+	(recurse_read_control_structure): Fix typo in comment.
+	(read_command_lines): Use passed in prompt and tty flag to decide how
+	to build message.  Use readline_begin_hook when appropriate, to set
+	up a GUI interaction window.  Just return head, whether NULL or not,
+	after using readline_end_hook to complete GUI interaction.
+	(define_command, document_command): Build message in a temporary
+	buffer and pass it to read_command_lines, along with tty flag.
+
+
+Sat May 18 02:43:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (frameless_look_for_prologue):
+	Add FUNCTION_START_OFFSET only if func_start is non-zero.
+	* minsyms.c (lookup_minimal_symbol_by_pc):  Return NULL if
+	pc is not in a known section.
+	* stack.c (print_frame_info):  Remove check for fi->pc in known
+	section, now handled by lookup_minimal_symbol_by_pc.
+
+
+Fri May 17 13:31:04 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* sh-stub.c: New file, was config/sh/stub.c.
+
+
+Wed May 15 08:25:12 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* top.c (read_next_line): Fix thinkos.  From Donn Seeley.
+
+	* coffread.c (coff_symtab_read): Handle C_LABEL symbols like
+	C_STAT symbols.
+	* h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly.
+	Flush cached frames just before exiting.
+	* remote-sim.c (gdbsim_resume): Complain if the program isn't
+	being run.
+	* config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define.
+
+Tue May 14 18:05:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* procfs.c (procfs_thread_alive procfs_stop):  Make static.
+	(procfs_pid_to_str):  New routine to print out thread id's in an
+	intelligible manner.
+	* sol-thread.c (sol_thread_fetch_registers):  Re-order manner in
+	which supply_register is called to fix bug with writing
+	individual regs.
+	* config/sparc/tm-sun4sol2.h:  Define default for
+	target_pid_to_str in case host lacks libthread_db.
+
+Mon May 13 23:53:30 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in config.in configure configure.in
+	config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
+	config/sparc/tm-sun4sol2.h:  Use autoconf to config Solaris thread
+	and pthread support, since pre-2.5 systems don't come with
+	libthread_db.so.1.
+
+	* procfs.c (info_proc):  Use int instead of id_t.  Old versions of
+	Irix don't seem to define this.
+
+Mon May 13 17:40:58 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* top.c (execute_control_command, case while_control): Allow
+	a while command to be interrupted.
+
+Mon May 13 16:17:36 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* sol-thread.c:  More cleanup, add comments.
+	(sol_thread_resume):  Prevent people from trying to step
+	inactive threads.
+	(sol_thread_wait sol_thread_fetch_registers
+	sol_thread_store_registers):  Remove unnecessary check for
+	sol_thread_active.  These routines won't get called unless threads
+	are active.
+
+Mon May 13 11:29:37 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	SH3-E support from Allan Tajii <atajii@hmsi.com>:
+	* sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for
+	float registers.
+	(sh3e_reg_names): New register name array.
+	(sh_processor_type_table): Add sh3e processor type.
+	* config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test.
+	(REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for
+	full set of registers.
+	* remote-e7000.c (want_sh3, want_sh3_nopc): New globals.
+	(e7000_fetch_registers, e7000_wait): Use them.
+	* sh3-rom.c (sh3_regnames): Add float registers.
+	(sh3e_cmds, sh3e_ops): New globals.
+	(sh3e_open): New function.
+	(_initialize_sh3_rom): Rename from _initialize_sh3, set up
+	sh3e target vector.
+
+Fri May 10 15:53:38 1996  Stu Grossman  (grossman@lisa.cygnus.com)
+
+	* sol-thread.c:  Cleanup.  gcc -Wall fixes.  Add prototypes.
+	Print out messages instead of codes for thread_db errors.  Make
+	access macros for thread and lwp manipulation.  Make cleanups to
+	fixup inferior_pid in case of errors.
+
+Thu May  9 19:06:02 1996  Fred Fish  <fnf@cygnus.com>
+
+	* aclocal.m4: Remove unused definition of AC_C_CROSS.
+	* configure.in: Add powerpcle-*-solaris* host and target config
+	so April 30th change does not get lost next time configure is
+	rebuilt.
+
+Thu May  9 14:13:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c,
+	infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
+	win32-nat.c, config/nm-lynx.h:  Rename thread.h to gdbthread.h to
+	avoid conflict with Solaris /usr/include/thread.h.
+
+Thu May  9 12:33:32 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
+
+	* abug-rom.c: Config file for the older style ABug monitor that
+	runs on the mvme13x boards.
+	* config/m68k/monitor.mt: Add abug support for m68k cross
+	debugging.
+
+Wed May  8 20:33:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* infcmd.c (do_registers_info):  Always print the raw floating
+	point value's bytes in big endian order, so the the leftmost bit
+	is the most significant.
+	* breakpoint.c (clear_momentary_breakpoints): Remove dead code
+	that is referenced nowhere else.
+	(set_breakpoint): Ditto.
+	(do_enable_breakpoint): Created from enable_once_breakpoint
+	with a couple of changes.
+	(enable_breakpoint): Call do_enable_breakpoint with an appropriate
+	bpdisp enum value to set disposition of breakpoint.
+	(enable_once_breakpoint): Ditto.
+	(enable_delete_breakpoint): Ditto.
+	* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
+	* symtab.c (find_pc_line): Improve comments.
+	* xcoffread.c: Ditto.
+
+Tue May  7 18:37:06 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* target.c (debug_to_xfer_memory): Insert line breaks when
+	dumping the memory block.
+
+Mon May  6 13:52:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* fork-child.c (fork_inferior), inferior.h:  init_trace_fun now
+	returns a possibly modified pid.
+	* inftarg.c (ptrace_him):  Now returns pid;
+	* m3-nat.c (m3_trace_him):  Now returns pid;
+	* infcmd.c (run_command):  Minor cleanup.
+	* infrun.c (wait_for_inferior):  Add another check for one_stepped
+	near where we read the pc to avoid erroneously setting
+	random_signal for multi-threaded support.
+	* procfs.c:  Add support for Solaris LWPs.  Remove def of
+	LOSING_POLL.  Many cleanups...  Several workarounds for Solaris
+	lossage.  System call entry and exit are now handled by
+	dynamically registered handlers.
+	* (syscallname):  Don't barf when handed an unknown syscall
+	number.
+	* (info_proc_syscalls):  Ditto.
+	* sol-thread.c:  New file.  Implements Solaris thread support.
+	* symfile.c (symbol_file_add):  Add call to target_new_objfile to
+	notify target-dependent code about new symbol tables.
+	* (clear_symtab_users):  Call target_new_objfile to notify it of
+	the removal of all symbol tables.
+	* target.c (push_target):  Make sure that to_close is non-zero
+	before calling it.
+	* target.h (target_new_objfile):  Provide default.	
+	* config/alpha/nm-osf2.h:  Define LOSING_POLL because this version
+	of OSF can't hack using poll with /proc.
+	* config/sparc/nm-sun4sol2.h (target_new_objfile):  Define to be
+	sol-thread-new-objfile.
+	* config/sparc/sun4sol2.mh:  Add sol-thread.o to NATDEFFILES, and
+	add libthread_db.so.1 to NAT_CLIBS.
+	* config/sparc/tm-sun4sol2.h:  Define PIDGET, TIDGET, and
+	target_pid_to_str.
+
+Sat May  4 02:13:34 1996  N Srin Kumar  <nsrin@wipinfo.soft.net>
+
+	* procfs.c (remove_fd):  Fix copy of fds to fill hole left after
+	removal of the requested fd.
+
+Mon May  6 07:52:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific
+	hooks under ELF.
+
+	* config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT.
+
+Thu May  2 12:46:14 1996  Jeffrey A Law  (law@cygnus.com)
+
+	From Peter Schauer:
+	* breakpoint.h (enum bpdisp):  Add del_at_next_stop.
+	* breakpoint.c (insert_breakpoints, watchpoint_check,
+	bpstat_stop_status):  Avoid bad references to memory freed via
+	delete_breakpoint on watchpoints going out of scope.
+	Do not delete these watchpoints, disable them and change their
+	disposition to del_at_next_stop instead.
+	(breakpoint_auto_delete):  Delete all breakpoints whose disposition
+	is del_at_next_stop.
+	(breakpoint_init_inferior):  Use switch to avoid reference to
+	already deleted breakpoint.
+
+Wed May  1 17:29:18 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h.
+	* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
+	* config/rs6000/rs6000.mt (TDEPFILES): ... to here.
+	* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
+	(solib_info): Call xcoff_relocate_symtab via the hook.
+	(sharedlibrary_command): Ditto.
+	* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
+	(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
+	(xcoff_init_loadinfo_hook): Define and initialize here.
+	(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
+	(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
+	* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
+	* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
+	of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
+	* rs6000-nat.c (_initialize_core_rs6000): Add initialization
+	of xcoff_relocate_symtab_hook.
+
+Tue Apr 30 13:22:02 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* configure (powerpcle-*-solaris*): Add Solaris support.
+
+	* config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for
+	Solaris support.
+
+Mon Apr 29 16:17:31 1996  Dawn Perchik <dawn@cygnus.com>
+
+	* c-valprint.c (c_val_print): Fix printing for arrays defined 
+	with 0 length.
+
+Sun Apr 28 15:08:05 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Support for bi-endian remote breakpoints.
+	* remote.c (big_break_insn, little_break_insn): New globals.
+	(break_insn): Remove.
+	(remote_insert_breakpoint, remote_remove_breakpoint): Use own
+	code if REMOTE_BREAKPOINT defined, otherwise call memory
+	breakpoint functions.
+	* config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove.
+	(BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define.
+
+	* mon960-rom.c (mon960_cmds): Remove forward decl.
+	(mon960_load): Use current_monitor instead of mon960_cmds.
+	(mon960_regnames): Remove backslashes from line ends.
+	(_initialize_mon960): Fix documentation string.
+
+Sun Apr 28 12:10:35 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.h (psymbol_allocation_list):  Expand comments which
+	describe the psymbol allocation list and how each field is
+	used.
+
+Sun Apr 28 03:44:30 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (delete_breakpoint):  Fix bpt->val, bpt->exp
+	storage leaks.
+	(breakpoint_re_set_one):  Fix b->exp, b->val, b->cond storage leaks.
+
+	* infcmd.c (run_command), solib.c (locate_base):  Check for
+	target_has_execution in addition to inferior_pid, a core file
+	from a threaded program is yielding a non-zero inferior_pid.
+
+	* sparc-tdep.c (get_saved_register):  Handle window registers
+	in a dummy frame correctly.
+
+Sat Apr 27 20:38:32 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (CLIBS): Move $(MMALLOC) past all other libs,
+	so that anything that wants an allocation function not yet pulled
+	in, will get it from mmalloc rather than a system library.
+	* Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS,
+	to avoid surprising results when used.
+
+Sat Apr 27 00:12:05 1996  Dawn Perchik  (dawn@cygnus.com)
+
+	* stabsread.c: Changes and bug fixes for cfront support.
+	Fix bug for class data members.
+	Fix parsing bug when no base classes exist.
+	Fix memory bug - allocate space for cplusplus specific info.
+	Add support for static data.
+	Add prototypes for static functions.
+	Enhance comments to show what each function expects to parse.
+	Cleanup code.
+	* stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename 
+	function to resolve_cfront_continuation.
+
+Fri Apr 26 23:58:26 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* infrun.c (wait_for_inferior): Call registers_changed when
+	restarting the inferior to get over a nullified instruction.
+	
+Tue Apr 24 12:12:55 1996  Dawn Perchik (dawn@cygnus.com)
+
+	* dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c: 
+	Add new support for parsing cfront stabs.
+
+Wed Apr 24 00:32:55 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* infrun.c (wait_for_inferior): Move "have_waited" label
+	outside of #ifdef conditionals.  Don't trash the wait status
+	if we get a signal and the current instruction is nullified.
+
+Mon Apr 22 20:17:01 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VERSION): Bump version number to 4.16.1.
+	* NEWS: Update for 4.16 release.
+
+Mon Apr 22 16:32:29 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.h: Clean up comment formatting.
+	(current_monitor): Remove decl.
+	(LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions.
+	(push_monitor, SREC_SIZE): Remove.
+	* monitor.c: Expand old macro into current_monitor derefs
+	everywhere.
+	* remote-os9k.c (current_monitor): Remove definition.
+
+Mon Apr 22 14:54:45 1996  Mark Alexander  <marka@superball.cygnus.com>
+
+	* corefile.c (specify_exec_file_hook): Allow arbitrary number of
+ 	hooks.
+	(call_extra_exec_file_hooks): New function.
+	* h8300-tdep.c: Lint; add .h files to provide missing declarations,
+	remove unused variables.
+	(set_machine_hook): New function.
+	(_initialize_h8300m): Initialize it.
+
+Fri Apr 19 15:03:49 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* remote-mips.c (encoding): Don't specify size, to avoid bug in
+	SunOS native compiler.
+
+Thu Apr 18 18:46:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* monitor.c: Use int rather than LONGEST for values, since
+	the formatting strings are not prepared to accept long longs.
+
+Wed Apr 17 20:17:27 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'.
+
+Tue Apr 16 17:38:23 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* corelow.c (add_to_thread_list):  Make sure reg_sect is non-null
+	before de-referencing it.  Prevents deref of NULL pointer if core
+	file lacks .reg section.
+	* defs.h:  Rename floatformat_{to from}_long_double to
+	floatformat_{to from}_doublest.  Get rid of FLOATFORMAT_{TO
+	FROM}... macros.
+	* findvar.c (extract_floating store_floating):  Change all refs to
+	FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest.
+	* utils.c:  Change floatformat_{to from}_long_double to
+	floatformat_{to from}_doublest cuz the new routines will use
+	whatever size (double or long double) is appropriate.
+	* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
+	REGISTER_CONVERT_TO_RAW):  Change FLOATFORMAT... macros to
+	floatformat... routine calls.
+
+Mon Apr 15 16:34:11 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* stabsread.c (read_type):  Move handling of '@' from type
+	number handling to handling of types proper (as emitted by gcc!).
+	For typedefs, allocate the typedef type before reading its
+	definition, to properly handling recursive types.
+
+Mon Apr 15 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* ch-exp.c (calculate_array_length): Fix prototype.
+
+Sat Apr 13 14:21:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote-nindy.c (nindy_open):  Acquire more target state so that
+	user can attach to a previously running program.
+	* (nindy_fetch_registers nindy_store_registers):  Get rid of fp
+	conversion code.  That's all handled in {extract store}_floating
+	now.
+	* utils.c (floatformat_to_double):  Don't bias exponent when
+	handling zero's, denorms or NaNs.
+	* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
+	REGISTER_CONVERT_TO_RAW):  Change to using DOUBLST and
+	FLOATFORMAT_TO/FROM_DOUBLEST macros.
+	* config/i960/tm-nindy960.h:  Undefine
+	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
+	REGISTER_CONVERTIBLE.  These are no longer necessary now that all
+	the magic happens in extract/store_floating.
+
+Sat Apr 13 02:58:02 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* eval.c (evaluate_subexp_standard):  Report error when attempting to
+	evaluate subscripts for types which cannot be subscripted.
+
+	* valarith.c (value_x_binop, value_x_unop):  Add noside parameter.
+	Return a zero value with the return type of the member function
+	if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member
+	function.
+	* values.h (value_x_binop, value_x_unop):  Update prototypes
+	accordingly.
+	* eval.c (evaluate_subexp_standard):  Update all callers of
+	value_x_binop, value_x_unop accordingly.
+
+	* valarith.c (value_neg, value_complement):  Perform ANSI C/C++
+	integral promotion on operands.
+
+Fri Apr 12 13:19:27 1996  Fred Fish  <fnf@cygnus.com>
+
+	* README: Update for 4.16 release.
+	* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
+	* configure: Regenerate with autoconf.
+	* config.in: Regenerate with autoheader.
+	* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
+	* top.c (command_loop): Ditto.
+
+Fri Apr 12 09:45:29 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* defs.h:  Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
+	defaults for bi-endian targets.  Replace function pointers for
+	floatformat routines with macros.  No need for these to be runtime
+	selectable.
+	* findvar.c:  Get rid of floatformat function pointers.  Use
+	macros in extract_floating and store_floating.
+	* remote-nindy.c (nindy_fetch_registers nindy_store_registers):
+	Use floatformat macros.
+
+Thu Apr 11 21:28:02 1996  Fred Fish  <fnf@cygnus.com>
+
+	From: Miles Bader  <miles@gnu.ai.mit.edu>
+	* configure.in (AC_CHECK_HEADERS): check for endian.h.
+	Use AC_CHECK_TOOL to find AR & RANLIB.  Add AC_PROG_AWK.
+	Add host & target cases for i[345]86-*-gnu*.
+	* config.in: Regenerate with autoheader.
+	* configure: Regenerate with autoconf.
+	* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
+	(init.c): Don't scan mig-generated files.
+	* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
+	* config/nm-m3.h (ATTACH_NO_WAIT): Define.
+	* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
+ 	rather than "#ifndef MACH".
+
+Thu Apr 11 18:49:42 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (remotewritesize): New GDB variable, controls size
+	of memory packets sent to the target.
+
+Thu Apr 11 13:47:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* dcache.c:  Add prototypes.  Make many functions static.
+	* (dcache_peek dcache_fetch dcache_poke):  Make dcache_fetch and
+	dcache_poke call dcache_xfer_memory directly in order to fix
+	problems with turning off dcache.  dcache_peek is now unnecessary,
+	so it goes away.
+
+	* defs.h:  Define new macros HOST_{FLOAT DOUBLE	LONG_DOUBLE}_FORMAT 
+	and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
+	to a struct floatformat.  This allows for better handling of
+	targets whose floating point formats differ from the host by more
+	than just byte order.
+	* (floatformat_to_long_double floatformat_from_long_double):
+	Prototypes for new functions in utils.c.
+	* (floatformat_to_doublest floatformat_from_doublest):  Prototypes
+	for pointers to floating point conversion functions.  The actual
+	function uses either double or long double if the host supports it.
+	* findvar.c (floatformat_to_doublest floatformat_from_doublest):
+	Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
+	* (extract_floating store_floating):  Rewrite.  Now, if host fp
+	format is the same as the target, we just do a copy.  Otherwise,
+	we call floatformat_{to from}_doublest.
+	* remote-nindy.c (nindy_xfer_inferior_memory):  Change param
+	`write' to `should_write'.
+	* utils.c (floatformat_to_long_double
+	floatformat_from_long_double):  New routines that implement long
+	double versions of functions in libiberty/floatformat.c.
+	* config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT):  Define this for
+	i960 extended real (80 bit) numbers.
+	* nindy-share/nindy.c (ninMemGet ninMemPut):  Return number of bytes
+	actually read or written.
+
+Wed Apr 10 02:56:06 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-valprint.c (chill_val_print): Remove call to calculate_array_length.
+	(calculate_array_length): Move function from here ...
+
+	* ch-exp.c (calculate_array_length): ... to here.
+	(parse_primval): If we have a symbol with an array type
+	and the length is 0, call calculate_array_length.
+
+Tue Apr  9 01:23:05 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET:
+	Add some checks for powerset compatibility.
+
+	* valops.c (value_slice): Use lowbound instead of lowerbound for
+	call to slice_range_type to get correct bounds.
+
+Mon Apr  8 12:53:56 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and
+	dependencies.
+	* scm-lang.c (gdb_string.h): Include.
+	* objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow
+	call to correct type (char *).
+	* cp-valprint.c (cp_print_static_field): Ditto.
+	* somsolib.c (som_solib_create_inferior_hook): Add a declaration
+	for external find_unwind_entry function (from hppa-tdep.c).
+	* remote-pa.c (remote_write_bytes, remote_read_bytes): Change
+	type of second arg to "char *" to be type compatible with
+	dcache.
+	(remote_wait): Cast second arg to strtol to correct type.
+	* hppa-tdep.c (compare_unwind_entries): Change argument types to
+	"const void *" to be type compatible with qsort, and then
+	assign to local args prior to use.
+
+Mon Apr  8 15:35:52 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* infptrace.c (kill_inferior): Remove call to "kill"; update
+	comments.
+
+Mon Apr  8 14:05:07 1996  Geoffrey Noer  <noer@cygnus.com>
+
+	* remote-e7000.c: don't append :23 to target port if __WIN32__
+	is defined (it's WinGDB).
+
+Sun Apr  7 22:34:29 1996  Fred Fish  <fnf@cygnus.com>
+
+	From: Miles Bader  <miles@gnu.ai.mit.edu>
+	* gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c,
+	msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk,
+	config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h,
+	m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd.
+
+Sun Apr  7 13:32:41 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (case host): Add i386sco5 host.
+	* configure: Regenerate.
+	
+	From: Robert Lipe <robertl@dgii.com>
+	Add support for SCO OpenServer 5 (a.k.a. 3.2v5*)  This
+	target is an SVR3.2 with COFF, ELF, and shared libes, but
+	no /proc.
+	* config/i386/i386sco5.mh:  New file.
+	* config/i386/nm-i386sco5.h:  New file.
+
+Sat Apr  6 08:55:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* bcache.c (bcache): When size of chunk to cache is exactly equal to
+ 	BCACHE_MAXLENGTH, stash chunk as unique copy.
+
+Sat Apr  6 00:46:26 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef.
+	(add_psymbol_to_list): Add an arg for passing CORE_ADDR values and
+	use it, rather than calling add_psymbol_addr_to_list.
+	(add_psymbol_addr_to_list): Delete.
+	(add_psymbol_to_list): Make psymbol static to avoid random data in
+	gaps due to alignment of structure members.
+	* symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST,
+ 	ADD_PSYMBOL_ADDR_TO_LIST): Remove.  Real world tests show no
+	performance improvements by inlining via complicated macros and
+	they just make gdb larger and harder to maintain.
+	* dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST
+	and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to
+	add_psymbol_to_list with appropriate long or CORE_ADDR args.
+	(add_partial_symbol): Ditto.
+	* partial-stab.h: Ditto.
+	* os9kread.c (read_os9k_psymtab): Ditto
+	* mdebugread.c (parse_partial_symbols): Ditto.
+	(handle_psymbol_enumerators): Ditto.
+	(demangle.h): Include.
+	* hpread.c (hpread_build_psymtabs): Ditto.
+	(hpread_build_psymtabs): Ditto.
+	(demangle.h): Include
+
+Thu Apr  4 20:16:55 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in: Check for setpgid function.
+	* config.in: Regenerate with autoheader.
+	* configure: Regenerate with autoconf.
+	* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
+	if it is actually defined.
+	(gdb_setpgid): Use HAVE_SETPGID.
+	* ch-exp.c: Change include of <string.h> to "gdb_string.h".
+	* c-exp.y, f-exp.y, m2-exp.y: Ditto.
+	* c-exp.y, serial.c: Include <ctype.h>.
+	* config/m68k/nm-news.h: Add typedef for pid_t which is
+	apparently missing from <sys/types.h>.  Enclose entire
+	file in NM_NEWS_H ifndef and define when included.
+	* config/mips/nm-news-mips.h: Ditto.
+	* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
+	REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
+
+Thu Apr  4 19:04:18 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* arm-xdep.c: Move native-specific code to here from arm-tdep.c.
+	* arm-tdep.c (arm_apcs_32): New global.
+	(arm_addr_bits_remove, arm_saved_pc_after_call,
+ 	arm_push_dummy_frame, arm_pop_frame): New functions.
+	(arm_skip_prologue): Updated version from Richard Earnshaw.
+	(_initialize_arm_tdep): Add set/show "apcs32".
+	* config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call
+	arm_addr_bits_remove.
+	(SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call.
+	(frame_find_saved_regs): Declare properly.
+	(PUSH_DUMMY_FRAME): Call arm_push_dummy_frame.
+	(POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of
+	explicit mask.
+	* config/arm/nm-arm.h: New file.
+	* config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS):
+	Move definitions to nm-arm.h.
+	* config/arm/arm.mh (NAT_FILE): Define.
+
+	* symfile.c (generic_load): Initialize data_count properly.
+
+Thu Apr  4 17:17:53 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symmisc.c (print_objfile_statistics): Print memory used by
+	psymbol cache obstack.
+
+Thu Apr  4 15:43:07 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* symfile.c (report_transfer_performance): New function.
+	(generic_load): Call it to report transfer rate.
+	* remote-e7000.c (e7000_load): Ditto.
+
+Mon Apr  1 16:31:00 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Change references to config.h to be in objdir,
+	edit out rules to rebuild config.h.
+
+Mon Apr  1 08:32:23 1996  Fred Fish  <fnf@cygnus.com>
+
+	* hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before
+	proceeding.
+
+Sun Mar 31 16:15:43 1996  Fred Fish  <fnf@cygnus.com>
+
+	* hppah-nat.c (store_inferior_registers, store_inferior_registers,
+	fetch_register, child_xfer_memory): Use call_ptrace function supplied
+	by infptrace.c rather than calling ptrace directly.
+
+Sun Mar 31 15:39:00 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mon960-rom.c: Cleanups and elimination of unused code,
+	clarify documentation string.
+	(mon960_serial, mon960_ttyname): Remove.
+	* config/i960/tm-mon960.h (ADDITIONAL_OPTIONS,
+	ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove.
+
+Sat Mar 30 11:00:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in: Check whether printf family supports printing
+	long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
+	* acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
+	* configure: Regenerate.
+	* valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
+	* c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
+	* configure.in: Fix have_gregset and have_fpregset autoconf
+	variable names so that they match the pattern required to
+	cache them.
+
+Fri Mar 29 21:39:56 1996  Fred Fish  <fnf@cygnus.com>
+
+	* core-aout.c (fetch_core_registers): Cast core_reg_size to int
+	before testing against reg_ptr.
+	* eval.c (evaluate_subexp_standard): Cast type of
+	TYPE_FN_FIELD_VOFFSET to int.
+	* findvar.c (extract_signed_integer, extract_unsigned_integer,
+	extract_long_unsigned_integer): Cast type of sizeof to int.
+	* values.c (unpack_field_as_long, modify_field): Ditto.
+	* valops.c (value_assign, call_function_by_hand): Ditto.
+	* infcmd.c (do_registers_info): Ditto.
+	* ser-tcp.c (tcp_open): Ditto.
+	* remote.c (putpkt): Ditto.
+	* dcache.c (dcache_peek): Ditto.
+	* dcache.c (dcache_poke): Ditto.
+	* m2-exp.y (yylex): Ditto.
+	* gnu-regex.c (re_match_2): Ditto.
+	* f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
+	out unused macro definition and variables.
+	* inftarg.c (proc_wait): Move from main.c to here, and make static.
+	* valprint.c (val_print_string): Change bufsize from int to unsigned.
+	* main.c (wait.h): Include.
+	* top.c (command_line_input): Remove unused variable "c".
+	* f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
+	value TYPE_CODE_TYPEDEF to switch statement.
+	(f_type_print_varspec_suffix): Add missing enum value
+	TYPE_CODE_TYPEDEF to switch statement.
+	* ch-exp.c (parse_primval): Add remaining enumeration values to
+	switch statement, with no specific action.
+	(ch_lex): Add LOC_UNRESOLVED in switch statement.
+	(pushback_token): Ifdef out, since code using it is ifdef'd out.
+	* stabsread.c (cleanup_undefined_types): Remove unused label
+	"badtype".
+	* objfiles.h (print_symbol_bcache_statistics): Add prototype.
+	* maint.c (objfiles.h): Include.
+	(maintenance_print_statistics): Remove unused variable "temp".
+	* minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
+	unused variable "found_file_symbol".
+	* m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
+	* language.c (lang_bool_type): Use existing function local type
+	variable rather than create block local variables.
+	* solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
+	* infptrace.c (wait.h, command.h): Include.
+	* ser-tcp.c (gdb_string.h): Include
+	* i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
+	(i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
+	* command.c (complete_on_enum): Make assignment used as truth value
+	explictly check against NULL.
+	(wait.h): Include.
+	* infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
+	that uses it is ifdef'd out.
+	* parser-defs.h: Add prototype for write_dollar_variable.
+	* infrun.c: Add prototype for write_pc_pid.
+	* breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
+	* symmisc.c (bcache.h): Include.
+	* bcache.h: Add prototype for print_bcache_statistics.
+	* symfile.c: Include <time.h>.
+	* printcmd.c (print_scalar_formatted): Change len to unsigned int.
+	* valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
+	* valarith.c (value_binop): Change result_len, promoted_len1,
+ 	and promoted_len2 to unsigned int.
+	* valarith.c (value_subscripted_rvalue): Change elt_offs and
+ 	elt_size to unsigned int.
+	* valops.c (value_array): Change typelength to unsigned int.
+	(destructor_name_p): Change len to unsigned int.
+	* scm-lang.h (scm_parse): Add prototype for scm_unpack.
+	* symfile.c (decrement_reading_symtab): Change return type to void.
+	* valarith.c (value_subscript): Remove unused variable "word".
+	(value_subscript): Remove unused variable "tint".
+	* valops.c (auto_abandon): Ifdef out, since code using it is also
+	ifdef'd out.
+	* eval.c (init_array_element): Remove unused variable "val".
+	* Makefile.in (values.o): Depends on scm-lang.h.
+	(command.o): Depends upon wait_h.
+	(ser-tcp.o): Depends upon gdb_string.h.
+	(infptrace.o): Depends upon wait_h and command_h.
+	(maint.o): Depends on objfiles.h and symfile.h.
+	* values.c (allocate_repeat_value): Remove unused variable
+	"element_type".
+	(scm-lang.h): Include.
+	* breakpoint.c (create_longjmp_breakpoint): Enclose in
+	GET_LONGJMP_TARGET define, unused otherwise.
+	* config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
+	i386_remove_watchpoint and i386_stopped_by_watchpoint.
+	
+Thu Mar 28 12:53:19 1996  Doug Evans  <dje@canuck.cygnus.com>
+
+	* configure.in (sparc64-*-solaris2*): Delete.
+	Stick with sparc-*-solaris2*.
+	* configure: Regenerated.
+
+Thu Mar 28 06:51:26 1996  Fred Fish  <fnf@cygnus.com>
+
+	* valops.c (value_assign): Make copy of internal variable value
+	before returning it as a new value, since it is owned by the 
+	internal variable and will be freed along with it.
+
+Wed Mar 27 08:36:17 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* From Peter Schauer.
+	* breakpoint.c (breakpoint_re_set_one):  Keep temporary
+	breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
+	and bp_step_resume in case breakpoint_re_set_one is called due
+	to a step over a dlopen call.
+	* infrun.c (wait_for_inferior):  Always remove breakpoints from
+	inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
+
+Tue Mar 26 13:15:32 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer
+	non-prototyped case over prototyped case for C.
+	* config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE):  Ditto.
+
+Sat Mar 23 17:24:28 1996  Fred Fish  <fnf@cygnus.com>
+
+	* os9kread.c (os9k_process_one_symbol): Note nonportable
+	assumption that an int can hold a char *.
+
+	* bcache.h (struct hashlink): Wrap data[] inside union with
+	double to force longest alignment.
+	(BCACHE_DATA): New macro to access data[].
+	(BCACHE_ALIGNMENT): New macro to get offset to data[].
+	* bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get
+ 	address of cached data.  Use BCACHE_ALIGNMENT to compute
+	amount of space to allocate for each hashlink struct.
+
+Sat Mar 23 12:14:02 1996  Fred Fish  <fnf@cygnus.com>
+
+	* ch-lang.c (evaluate_subexp_chill): Fix typo.
+
+Thu Mar 21 08:27:19 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VERSION): Bump version to 4.15.3
+
+Thu Mar 21 10:56:41 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* config.in: Rename from config.h.in.
+	* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
+	Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
+	* configure: Rebuild.
+	* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
+	Set CONFIG_HEADERS to config.h:config.in.
+
+Tue Mar 19 12:47:51 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* partial-stab.h (case N_ENDM):  Finish current partial symbol
+	table for Solaris 2 cc.
+
+Tue Mar 19 10:39:15 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* rs6000-nat.c (exec_one_dummy_insn): Don't clobber the
+	PC in the registers array.  From Peter Schauer.
+
+Mon Mar 18 13:47:09 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.c (reread_symbols): Reinitialize bcache struct
+	members to zero using memset.  Also use memset to reinit
+	global_psymbols and static_psymbols, rather than explicitly
+	resetting each structure member.
+
+Sat Mar 16 19:47:36 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in: Add fragment to create stamp-h.
+	
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* configure.in (AC_CHECK_HEADERS):  Check for link.h.
+	* configure:  Regenerate with autoconf.
+	* config.h.in:  Regenerate with autoheader.
+	* config/i386/nm-linux.h:  Include solib.h only if HAVE_LINK_H
+	is defined.
+	* solib.c:  Exclude most of the code if HAVE_LINK_H is not defined.
+	* config/i386/linux.mh:  Reinstate XM_CLIBS, it is needed for
+	older a.out based systems.
+
+Sat Mar 16 16:45:43 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config.h.in: New file.
+	* acconfig.h: New file, for autoheader.
+	* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
+	* configure: Regenerate.
+	* Makefile.in (defs_h): Add config.h
+	(distclean): Remove config.h and stamp-h during distclean.
+	(config.h, stamp-h): New targets to remake config.h when necessary.
+	* defs.h (config.h): Include before any other includes or defines.
+	* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
+	* i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H.
+
+Sat Mar 16 14:55:27 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* Makefile.in (INSTALLED_LIBS):  Make sure that @LIBS@ will not
+	result in an empty line, to work around a bug in native Ultrix 4.4
+	and OSF/1-3.2C make.
+
+Sat Mar 16 13:33:17 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in: Add gdbserver to configdirs under linux.
+	* configure: Regenerate.
+	
+Fri Mar 15 12:06:58 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/i386/nm-nbsd.h (FLOAT_INFO): Comment out.
+	* config/i386/tm-nbsd.h (NUM_REGS): Define.
+
+Thu Mar 14 10:31:18 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* solib.c (solib_break_names): Add _r_debug_state for
+	vanilla SVR4 implementations.  From Peter Schauer.
+
+Mon Mar 11 14:24:57 1996  Dawn Perchik  <dawn@critters.cygnus.com>
+
+	* mon960-rom.c: New file; support mon960 rom monitor on i960.
+	* monitor.c (monitor_debug): Change remotedebug to buffer strings.
+	* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
+	epecting prompt and echo during open.
+	* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to 
+	determine if break should be sent as stop command.
+	* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
+	* i960-tdep.c (mon960_frame_chain_valid): New function for getting 
+	stack frame on mon960.
+	* Makefile.in: Add mon960 files.
+	* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
+ 	added i960-nindy-coff* and i960-nindy-elf* for target nindy.
+	* configure: Regenerated.
+	* config/i960/mon960.mt, config/i960/tm-mon960.h: New files; 
+	support mon960 rom monitor on i960.
+
+Mon Mar 11 11:02:47 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	With Michael Snyder:
+	* i386-tdep.c (skip_trampoline_code): Fix strncmp length.
+	* win32-nat.c (CHECK, DEBUG*, debug_*): New.
+	(handle_load_dll): Don't reload symbols.
+	(handle_exception):  Use the DEBUG_* names.
+	(child_wait): Add DEBUG_* code.
+	(_initialize_inftarg): Add new commands to set debug_ names.
+
+Mon Mar 11 09:19:58 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* From Peter Schauer:
+	* breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE.
+	(bpstat_stop_status): Likewise.
+	(remove_solib_event_breakpoints): Likewise.
+	(clear_momentary_breakpoints): Likewise.
+	(re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint
+	if we still can't read the memory for that breakpoint.
+	(mention): Add bp_shlib_event case to keep gcc quiet.
+	
+Fri Mar  8 12:08:12 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* breakpoint.h (enum enable): New enum shlib_disabled for
+	shared library breakpoints that have been temporarily disabled.
+	* breakpoint.c: Handle temporarily disabled shared library
+	breakpoints like disabled breakpoints in most places.
+	(insert_breakpoints): Use shlib_disabled to indicate
+	that an unsettable breakpoint is only temporarily disabled.
+	(re_enable_breakpoints_in_shlibs): New function.
+	* corelow.c (solib_add_stub): After adding shared libraries,
+	try to reenable any temporarily disabled breakpoints.
+	* infcmd.c (attach_command): Likewise.
+	* infrun.c (wait_for_inferior): Likewise.
+
+Fri Mar  8 11:41:25 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* defs.h (extract_long_unsigned_integer): Declare.
+	* findvar.c (extract_long_unsigned_integer): New function.
+	* printcmd.c (print_scalar_formatted): Use it.
+	* valprint.c (val_print_type_code_int): Likewise.
+
+Thu Mar  7 17:40:50 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* infcmd.c (do_registers_info): Ignore anonymous registers.
+	* sh-tdep.c (set processor): New command to set specific
+	processor type.
+	(sh_reg_names, sh3_reg_names): Arrays of register names for
+	SH and SH3 processors.
+	(sh_set_processor_type): New function.
+	* sh3-rom.c (sh3_open): Call it.
+	(sh3_regname): Add names of all the bank registers.
+	(sh3_supply_register): Clean up formatting.
+	* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
+ 	bank registers.
+	(REGISTER_NAMES): Add names of bank registers.
+	(FP15_REGNUM): Define.
+	(REGISTER_VIRTUAL_TYPE): Use it.
+	* monitor.c: Clean up some comments.
+
+Thu Mar  7 12:09:51 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* i386b-nat.c: Revert part of Mar 5 change.  FreeBSD collapsed the
+ 	s* and t* symbols too.
+
+Thu Mar  7 15:18:51 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* symfile.c (generic_load): Avoid division by zero.
+
+Wed Mar  6 17:57:59 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems,
+	not just those with HANDLE_SVR4_EXEC_EMULATORS.
+
+	From Peter Schauer:
+	* breakpoint.c (internal_breakpoint_number): Move to file scope.
+	(create_solib_event_breakpoint): Use an internal breakpoint number.
+
+Wed Mar  6 00:32:44 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* valarith.c (value_in): Change builtin_type_chill_bool to
+	LA_BOOL_TYPE.
+
+Tue Mar  5 23:48:36 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-exp.c (parse_primval): Handle CARD, MAX, MIN.
+	(match_string_literal): Handle control sequence.
+	(match_character_literal): Deto.
+
+	* ch-lang.c (chill_printchar): Change formating of nonprintable
+	characters from C'xx' to ^(num).
+	(chill_printstr): Deto.
+	(value_chill_card, value_chill_max_min): New functions to process
+	Chill's CARD, MAX, MIN.
+	(evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN.
+
+	* expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN
+	for Chill's CARD, MAX, MIN.
+
+	* valarith.c (value_in): Add processing of TYPE_CODE_RANGE
+	and change return type from builtin_type_int to
+	builtin_type_chill_bool.
+
+Tue Mar  5 18:54:04 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/nm-nbsd.h (link_object, lo_name, etc): Move to here
+ 	from config/nm-nbsd.h.
+	* config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here
+	from config/sparc/tm-nbsd.h.
+
+	* config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here
+	instead of in config/m68k/xm-hp300hpux.h.
+
+Tue Mar  5 12:05:35 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide
+ 	implementation for NetBSD systems.
+
+Mon Mar  4 23:44:16 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* valarith.c (binop_user_defined_p):  Return 0 for BINOP_CONCAT.
+	(value_concat):  Handle varying strings (add COERCE_VARYING_ARRAY).
+
+	* ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT):  Error
+	if "function" is pointer to non-function.
+
+Mon Mar  4 17:47:03 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (print_gdb_version): Update copyright year.
+
+Mon Mar  4 14:44:54 1996  Jeffrey A Law  (law@cygnus.com)
+
+	From Peter Schauer:
+	* infrun.c (wait_for_inferior): Remove breakpoints and
+	switch terminal settings before calling SOLIB_ADD.
+	* solib.c (enable_break, SVR4 variant): Don't map in symbols
+	for the dynamic linker, the namespace pollution causes real
+	problems.
+
+Sun Mar  3 17:18:57 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* remote-mips.c (common_breakpoint): Explicitly terminate the
+ 	returned buffer.
+
+Wed Feb 28 22:32:18 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
+	* remote.c (remote_detach): Send a command 'D' to the target
+	when detaching, update the function's comments.
+
+Thu Jun  6 16:11:38 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (thread_cmd_list): New declaration.
+	(parse_int_arg): New function.
+
+Wed Jun  5 17:28:04 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.h (struct proc): Add DETACH_SC field.
+	* gnu-nat.c (make_proc): Set DETACH_SC.
+	(struct inf): Add DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
+	(make_inf): Set DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
+	(add_thread_commands): Add set/show for detach-suspend-count.
+	Add takeover-suspend-count cmd.
+	(inf_detach): Set suspend counts to the detach SC, not 0.
+	(set_thread_detach_sc_cmd, show_thread_detach_sc_cmd,
+	set_task_detach_sc_cmd, show_task_detach_sc_cmd,
+	set_thread_default_thread_detach_sc_cmd,
+	show_thread_default_thread_detach_sc_cmd): New functions.
+	(show_task_cmd): Also show detach-suspend-count values.
+	(thread_takeover_sc_cmd): New function.
+
+Fri May 31 16:49:24 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (show_thread_run_cmd): Actually print state.
+
+Thu May 30 10:47:56 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_signal): Make unforwardable exceptions an error.
+
+Tue May 28 17:06:36 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_validate_stopped): proc_getprocinfo takes a
+	pointer to the flags now, not the flags themselves.
+
+Mon May 27 13:31:17 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (gnu_wait): Print debugging msgs for pending execs.
+	(gnu_create_inferior): Check return from ptrace.
+
+Sun May 26 16:56:35 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.h (struct proc): Add DEAD field.
+	* gnu-nat.c (make_proc): Initialize DEAD.
+	(inf_set_traced, inf_validate_task_sc, inf_validate_procs: Frob it.
+	(gnu_wait): Only abort for 0 threads if the task isn't dead.
+
+Sat May 25 17:06:05 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_signal): Pass SIGCODE when posting a signal.
+
+Wed May 22 18:44:28 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (S_proc_wait_reply): Add SIGCODE argument.
+	(inf_set_traced): Only give no-signal-thread error message if
+	turning *on* tracing.
+
+Wed May 15 13:03:16 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_validate_procs): If INF has no threads, always
+	set inf->threads_up_to_date to 0.
+	(inf_signal): Pass in new SIGCODE argument to msg_sig_post_untraced.
+	(gnu_wait): Pass in new TIMEOUT arg to interrupt_operation.
+	(proc_update_sc): Cast thread state arg to thread_set_state.
+	(proc_get_state): Cast thread state arg to thread_get_state.
+	(inf_validate_task_sc): Cast task_basic_info arg to task_info.
+	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Call
+	inf_update_procs before we lookup the thread.
+	* config/i386/i386gnu.mh (MH_CFLAGS): New variable.
+
+Tue May  7 17:52:33 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (gnu_kill_inferior): Use inf_set_task to clear the task.
+
+Mon May  6 19:06:49 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_set_traced): Use msg_set_init_int with
+	INIT_TRACEMASK instead of setting the exec flags.
+
+Fri May  3 19:10:57 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (inf_validate_procs): Don't clear INF->task if we find
+	the task's died, so others have a chance at it.
+	(gnu_resume): When single-stepping a single thread, given an error
+	if there is no such thread.  When single-stepping one but running
+	the others, just given a warning and still run all the threads.
+	(gnu_wait): If there seem to be no threads, look harder, and
+	signal an error if there really aren't any.
+	(gnu_attach): Reset thread numbering to 0.
+
+	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Give
+	thread name in warning messages.
+
+	* gnu-nat.c (active_inf): New function.
+	(show_sig_thread_cmd, show_stopped_cmd): Use it.
+	(info_port_rights, info_send_rights_cmd, info_port_sets_cmd,
+	info_recv_rights_cmd, info_port_rights_cmd, info_port_rights_cmd):
+	New functions.
+	(add_task_commands): Add new port-right info commands.
+
+Fri Apr 26 20:42:16 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (gnu_wait): Instead of _hurd_intr_rpc_mach_msg, just
+	use mach_msg with MACH_RCV_INTERRUPT.
+	(set_noninvasive_cmd): New function.
+	(add_task_commands): Add command entry for `set noninvasive'.
+
+Mon Mar  4 14:12:02 1996  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (gnu_read_inferior): Use hurd_safe_memmove, not safe_bcopy.
+	(safe_bcopy): Function removed.
+
+Mon Dec  4 14:18:26 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c (proc_update_sc): Assert only threads can have state.
+	(make_proc): Initialize state_valid & state_changed fields.
+
+Tue Nov 28 17:51:21 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* reply_mig_hack.awk: New file.
+
+Tue Nov 14 14:31:03 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* breakpoint.c (breakpoint_1): Print breakpoint thread field.
+
+	* lynx-nat.c (child_wait): Return TARGET_WAITKIND_SPURIOUS for new
+	threads.
+
+Mon Nov 13 18:30:53 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* target.c (debug_to_check_threads): New function.
+
+	* inflow.c (terminal_init_inferior_with_pgrp): New function.
+	(terminal_init_inferior): Call terminal_init_inferior_with_pgrp.
+	* inferior.h (terminal_init_inferior_with_pgrp): New declaration,
+	but only if PROCESS_GROUP_TYPE is defined.
+
+Mon Nov  6 16:42:09 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* target.c (debug_to_thread_alive): Pass through the return value.
+
+Thu Nov  2 18:05:00 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* target.c (signals, target_signal_from_host, target_signal_to_host): 
+	Add mach exceptions.
+	* target.h (enum target_signal): Add mach exceptions.
+
+Mon Oct 30 16:41:04 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+
+	* gnu-nat.c: New file: gnu native backend.
+	* i386gnu-nat.c: New file: i386-specific part of gnu native backend.
+	* gnu-nat.h: New file.
+	* config/nm-gnu.h: New file.
+	* config/tm-i386gnu.h: New file.
+	* config/xm-i386gnu.h: New file.
+	* config/i386/i386gnu.mh: New file.
+	* config/i386/i386gnu.mt: New file.
+
+Wed Feb 28 15:50:12 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VERSION): Bump version to 4.15.2 to establish
+	baseline for gdb 4.16 rerelease testing.
+
+Wed Feb 28 13:32:05 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* somsolib.c (som_solib_create_inferior_hook): Before returning
+	call clear_symtab_users.
+
+Tue Feb 27 00:04:46 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote-e7000.c (e7000_open):  Delete all breakpoints when
+	connecting to e7000.  Change connect message to allow use of
+	monitor.exp in test suite.
+	* (e7000_load):  Print transfer rate of download.
+	* symfile.c (generic_load):  Print transfer rate of download.
+
+Sun Feb 25 13:58:33 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.in (mips*-*-vxworks*): New config.
+	* configure: Regenerated.
+
+	* config/mips/vxmips.mt, config/mips/tm-vxmips.h: New files.
+	* remote-vxmips.c (vx_convert_to_virtual, vx_convert_from_virtual):
+	Remove, never used.
+
+Sat Feb 24 12:30:28 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* partial-stab.h (case N_FUN):  Function symbols generated
+	by SPARCworks cc have a meaningless zero value, do not update
+	pst->textlow if the function symbol value is zero. 
+
+	* stabsread.c (define_symbol):  Initialize SYMBOL_TYPE field
+	for function prototype declaration symbols.
+
+Fri Feb 23 22:33:04 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote-e7000.c (e7000_load):  New routine to download via the
+	network.
+	* (e7000_wait):  Don't backup PC when we hit a breakpoint.
+	Apparantly new sh2 pods get this right...
+	* (e7000_ops):  Add call to e7000_load.
+
+Thu Feb 22 00:52:42 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/m68k/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h},
+	m68knbsd-nat.c: New files, support for NetBSD/m68k.
+
+	* configure.in (m68k-*-netbsd*): New config.
+	* configure: Regenerated.
+
+Wed Feb 21 19:00:21 1996  Fred Fish  <fnf@cygnus.com>
+
+	* standalone.c (open, _initialize_standalone): Fix obvious typos
+	reported by Martin Pool <martin@citr.uq.oz.au>.
+
+Wed Feb 21 14:24:04 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* solib.c (solib_create_inferior_hook): Fix thinko.
+
+Tue Feb 20 23:59:19 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* solib.c (solib_break_names): Define for Solaris and Linux.
+	(enable_break): For SVR4 systems, first try to use the debugger
+	interfaces in the dynamic linker to track shared library events
+	as they happen, then fall back to BKPT_AT_SYMBOL code.  Convert
+	BKPT_AT_SYMBOL code to use shared library event breakpoints.
+	(solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code,
+	it no longer needs to restart/wait on the inferior.
+	* symfile.c (find_lowest_section): No longer static.
+	* symfile.h (find_lowest_section): Corresponding changes.
+
+Tue Feb 20 18:54:08 1996  Fred Fish  <fnf@cygnus.com>
+
+	* valops.c (COERCE_FLOAT_TO_DOUBLE): Define default value.
+	(value_arg_coerce): Use COERCE_FLOAT_TO_DOUBLE.
+	* config/alpha/tm-alpha.h (COERCE_FLOAT_TO_DOUBLE): Define to 1.
+	* config/mips/tm-mips.h: Ditto.
+	* config/pa/tm-hppa.h: Ditto.
+	* config/rs6000/tm-rs6000.h: Ditto.
+	* config/sparc/tm-sparc.h: Ditto.
+	
+Tue Feb 20 17:32:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o.
+
+	* config/nm-nbsd.h (FETCH_INFERIOR_REGISTERS): Defined.
+	* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
+	#ifdef'd out definitions ---  Causes serious gdb failures on 
+	the i386.  Need to investigate further before enabling.
+
+	* i386b-nat.c (fetch_inferior_registers, store_inferior_registers,
+	fetch_core_registers): New functions.  These functions are defined
+	if FETCH_INFERIOR_REGISTERS is set.  Registers are fetched/stored
+	with ptrace PT_GETREGS/PT_SETREGS.
+
+Tue Feb 20 16:55:06 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* findvar.c (extract_floating store_floating):  Replace `long
+	double' with `DOUBLEST'.
+
+Mon Feb 19 15:25:51 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
+ 	Define.
+
+Mon Feb 19 10:32:05 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* symtab.h (looup_minimal_symbol_solib_trampoline): Declare.
+
+	* breakpoint.h (remove_solib_event_breakpoints): Declare.
+	* breakpoint.c (remove_solib_event_breakpoints): New function.
+	* somsolib.c (solib_create_inferior_hook): Remove all solib event
+	breakpoints before inserting any new ones.  Use a solib event
+	breakpoint for the breakpoint at "_start".
+	Remove extraneous "\n" from calls to warning.  
+	
+	* breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes
+	name array.
+	
+Mon Feb 19 01:09:32 1996  Doug Evans  <dje@cygnus.com>
+
+	* dwarfread.c (add_partial_symbol): Use ADD_PSYMBOL_ADDR_TO_LIST
+	for CORE_ADDR values.
+	(new_symbol): Use SYMBOL_VALUE_ADDRESS for CORE_ADDR values.
+	* symfile.h (add_psymbol_{,addr}to_list): Add prototypes.
+
+Sun Feb 18 14:37:13 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mipsread.c (mipscoff_symfile_read):  Unconditionally add
+	alpha coff dynamic symbols for all symbol files.  Makes skipping
+	over the trampoline code work when stepping from a function in a
+	shared library into a function in a different shared library.
+
+Sun Feb 18 09:27:10 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* config/sparc/tm-sparc.h:  Define PS_FLAG_CARRY.  Define
+	RETURN_VALUE_ON_STACK to return long doubles on the stack.
+
+Sat Feb 17 16:33:11 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (ch-exp.o): Add dependencies.
+	(various): Add gdb_string.h to dependencies that need it.
+
+Sat Feb 17 08:57:50 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symmisc.c (print_symbol_bcache_statistics): Update description for
+	printing byte cache statistics.
+
+Thu Feb 16 16:02:03 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* Add native support for long double data type.
+	* c-exp.y (%union):  Change dval to typed_val_float.  Use DOUBLEST
+	to store actual data.  Change types of INT and FLOAT tokens to
+	typed_val_int and typed_val_float respectively.  Create new token
+	DOUBLE_KEYWORD to specify the string `double'.  Make production
+	for FLOAT use type determined by parse_number.  Add production for
+	"long double" data type.
+	* (parse_number):  Use sscanf to parse numbers as float, double or
+	long double depending upon the type of typed_val_float.dval.  Also
+	allow user to specify `f' or `l' suffix to explicitly specify
+	float or long double constants.  Change typed_val to
+	typed_val_int.
+	* (yylex):  Change typed_val to typed_val_int.  Also, scan for
+	"double" keyword.
+	* coffread.c (decode_base_type):  Add support for T_LNGDBL basic
+	type.
+	* configure, configure.in:  Add check for long double support in
+	the host compiler.
+	* defs.h:  Define DOUBLEST appropriatly depending on whether
+	HAVE_LONG_DOUBLE (from autoconf) is defined.  Also, fix prototypes
+	for functions that handle this type.
+	* expression.h (union exp_element):  doubleconst is now type
+	DOUBLEST.
+	* m2-exp.y f-exp.y (%union):  dval becomes type DOUBLEST.
+	* findvar.c (extract_floating):  Make return value be DOUBLEST.
+	Also, add support for numbers with size of long double.
+	* (store_floating):  Arg `val' is now type DOUBLEST.  Handle all
+	floating types.
+	* parser-defs.h parse.c (write_exp_elt_dblcst):  Arg expelt is now
+	DOUBLEST.
+	* valarith.c (value_binop):  Change temp variables v1, v2 and v to
+	type DOUBLEST.  Coerce type of result to long double if either op
+	was of that type.
+	* valops.c (value_arg_coerce):  If argument type is bigger than
+	double, coerce to long double.
+	* (call_function_by_hand):  If REG_STRUCT_HAS_ADDR is defined, and
+	arg type is float and > 8 bytes, then use pointer-to-object
+	calling conventions.
+	* valprint.c (print_floating):  Arg doub is now type DOUBLEST.
+	Use appropriate format and precision to print out floating point
+	values.
+	* value.h:  Fixup prototypes for value_as_double,
+	value_from_double, and unpack_double to use DOUBLEST.
+	* values.c (record_latest_value):  Remove check for invalid
+	floats.  Allow history to store them so that people may examine
+	them in hex if they want.
+	* (value_as_double unpack_double):  Change return value to DOUBLEST.
+	* (value_from_double):  Arg `num' is now DOUBLEST.
+	* (using_struct_return):  Use RETURN_VALUE_ON_STACK macro (target
+	specific) to expect certain types to always be returned on the stack.
+
+Fri Feb 16 14:00:54 1996  Fred Fish  <fnf@cygnus.com>
+
+	* bcache.c, bcache.h: New files to implement a byte cache.
+	* Makefile.in (SFILES): Add bcache.c.
+	(symtab_h): Add bcache.h.
+	(HFILES_NO_SRCDIR): add bcache.h
+	(COMMON_OBJS): Add bcache.o
+	(bcache.o): New target.
+	* dbxread.c (start_psymtab): Make global_syms & static_syms
+ 	type "partial_symbol **".
+	* hpread.c (hpread_start_symtab):  Ditto.
+	* os9kread.c (os9k_start_psymtab):  Ditto.
+	* stabsread.h (start_psymtab):  Ditto.
+	* {symfile.c, symfile.h} (start_psymtab_common):  Ditto.
+	* maint.c (maintenance_print_statistics): Call
+ 	print_symbol_bcache_statistics.
+	* objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
+	and free pointers.
+	* solib.c (allocate_rt_common_objfile): Ditto.
+	* symfile.c (reread_symbols):  Ditto.
+	(free_objfile): Free psymbol bcache when objfile is freed.	
+	(objfile_relocate): Use new indirect psymbol pointers.
+	* objfiles.h (struct objfile): Add psymbol cache.
+	* symfile.c (compare_psymbols): Now passed pointers to pointers to
+	psymbols.
+	(reread_symbols): Free psymbol bcache when freeing other objfile
+	resources.
+	(add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
+	psymbol using the psymbol bcache.
+	(init_psymbol_list): Psymbol lists now contain pointers rather than
+	the actual psymbols.
+	* symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
+	grown arrays of pointers.
+	(ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
+	bcache.
+	* symmisc.c (print_partial_symbols): Now takes pointer to pointer
+	to partial symbol.
+	(print_symbol_bcache_statistics): New function to print per objfile
+ 	bcache statistics.
+	(print_partial_symbol, print_partial_symbols,
+ 	maintenance_check_symtabs, extend_psymbol_list):
+ 	Account for change to pointer to pointer to partial symbol.
+	* symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
+	make_symbol_completion_list): 
+ 	Account for change to pointer to pointer to partial symbol.
+	* symtab.h (bcache.h): Include.
+	* xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
+ 	type "partial_symbol **".
+
+Fri Feb 16 10:02:34 1996  Fred Fish  <fnf@cygnus.com>
+
+	* dwarfread.c (free_utypes): New function.
+	(read_file_scope): Call free_utypes as cleanup,	rather than just
+ 	freeing the utypes pointer.
+
+Thu Feb 15 21:40:52 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* demangle.c (is_cplus_marker):  New function, checks if a
+	character is one of the commonly used C++ marker characters.
+	* defs.h (is_cplus_marker):  Add prototype.
+	* c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle),
+	cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol),
+	stabsread.c (define_symbol, read_member_functions, read_struct_fields),
+	symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P),
+	values.c (vb_match):  Use is_cplus_marker instead of comparison
+	with CPLUS_MARKER.
+
+Thu Feb 15 18:08:13 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.h (INLINE_ADD_PSYMBOL): Default this to 0 and possibly
+	delete entirely someday.
+
+Thu Feb 15 15:25:34 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* mpw-make.sed: Edit out makefile rebuild rule.
+	(host_alias, target_alias): Comment out instead of deleting.
+	(@LIBS@): Edit out references.
+
+Tue Feb 13 22:56:46 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+ 	Use n_psyms in OBJSTAT, not psyms.
+
+Mon Feb 12 15:59:31 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* configure.in (sparclet-*-aout*): New config.
+	* configure: Regenerated.
+
+Mon Feb 12 14:17:52 1996  Fred Fish  <fnf@cygnus.com>
+
+	* somsolib.c (som_solib_add): Use xmalloc rather than bare
+	unchecked call to malloc.
+	* remote-mips.c (pmon_load_fast): ditto.
+	* remote-mm.c (mm_open): ditto.
+	* hpread.c (hpread_lookup_type): ditto.
+	* remote-adapt.c (adapt_open): ditto.
+
+Mon Feb 12 13:11:32 1996  Fred Fish  <fnf@cygnus.com>
+
+	* f-lang.c (allocate_saved_bf_node, allocate_saved_function_node,
+	allocate_saved_f77_common_node, allocate_common_entry_node,
+	add_common_block): Use xmalloc rather than malloc, some of which
+	were unchecked.
+	* gnu-regex.c: At same point as other gdb specific changes
+	#undef malloc and then #define it to xmalloc.
+	* ch-exp.c (growbuf_by_size): Use xmalloc/xrealloc rather than
+	bare unchecked calls to malloc/realloc.
+	* stabsread.c (dbx_lookup_type): Use xmalloc rather than bare
+ 	unchecked call to malloc.
+
+Wed Feb  7 11:31:26 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* symtab.c (gdb_mangle_name):  Change opname var to be const to
+	match return val of cplus_mangle_name.
+	* i960-tdep.c:  Change arg types of next_insn to match callers.
+
+Wed Feb  7 07:34:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/i386/linux.mh (XM_CLIBS, GDBSERVER_LIBS):  Remove.  These
+	apparently aren't needed in any reasonably recent version of
+	linux.
+
+Tue Feb  6 21:37:03 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* stabsread.c (read_range_type):  If !self-subrange and language
+	is Chill, assume a true range.  If a true_range is a sub_subrange,
+	use builtin_type_int for index_type.
+
+Tue Feb  6 18:38:51 1996  J.T. Conklin  <jtc@slave.cygnus.com>
+
+	* nindy-share/nindy.c (say): Use stdarg.h macros when compiling
+        with an ANSI compiler.
+
+Mon Feb  5 18:24:28 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	From Michael_Snyder@NeXT.COM (Michael Snyder):
+	* valops.c (value_arg_coerce): Coerce float to double, unless the
+ 	function prototype specifies float.
+	
+Mon Feb  5 09:51:55 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* language.c (set_language_command): Use languages table when
+	printing available languages.
+
+Sat Feb  3 12:22:05 1996  Fred Fish  <fnf@cygnus.com>
+
+	Fix problems reported by Hans Verkuil (hans@wyst.hobby.nl):
+	* command.c (add_cmd):  Add missing initialization for enums member.
+	Reorder members to match structure declaration to make it easier to
+	tell when one is missing.
+	* exec.c (exec_file_command): Fix problem where filename in malloc'd
+ 	memory is referenced after being freed.
+
+Sat Feb  3 03:26:21 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dwarfread.c (read_func_scope):  Avoid GDB core dumps if
+	AT_name tag is missing.
+
+	* procfs.c (procfs_stopped_by_watchpoint):  Fix logic when
+	FLTWATCH and FLTKWATCH are defined.
+
+	* remote.c (remote_read_bytes):  Advance memaddr for transfers,
+	return number of bytes transferred for partial reads.
+
+	* top.c (init_signals):  Reset SIGTRAP to SIG_DFL.
+
+Fri Feb  2 13:40:50 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* win32-nat.c (mappings): Add ppc registers.
+	(child_resume): Turn off step for ppc.
+
+Thu Feb  1 10:29:31 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* config/powerpc/(cygwin32.mh, cygwin32.mt, tm-cygwin32.h,
+	xm-cygwin32.h): New.
+	* config/i386/(*win32*): Becomes *cygwin32*.
+	* configure.in (i[3456]86-*-win32*): Becomes i[3456]86-*-cygwin32.
+	(powerpcle-*-cygwin32): New.
+	* configure: Regenerate.
+	* win32-nat.c  (child_create_inferior): Call CreateProcess
+	with the right program arg.
+
+Thu Feb  1 11:01:10 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* config/pa/tm-hppa.h (SOFT_FLOAT): Provide a default definition.
+
+Wed Jan 31 19:01:28 1996  Fred Fish  <fnf@cygnus.com>
+
+	* serial.c: Change fputc/fputs/fprintf to _unfiltered forms.
+
+Wed Jan 31 18:36:27 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove.
+
+	* config/sparc/xm-sparc.h (HAVE_WAIT_STRUCT): Remove, never used.
+
+	* config/i386/nm-i386mach.h (CHILD_PREPARE_TO_STORE): Move to
+	here from config/i386/xm-i386mach.h, fix name.
+	* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
+	* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
+	here from config/i386/xm-ptx4.h.
+	* config/i386/nm-ptx4.h: Ditto,	from config/i386/xm-ptx.h.
+	* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
+	* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
+	* config/sparc/nm-nbsd.h: Ditto, from config/sparc/xm-nbsd.h.
+	* config/sparc/nm-sun4os4: Ditto, from config/sparc/xm-sparc.h.
+
+	* config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h.
+	(PRSVADDR_BROKEN): Move here from xm-sun4sol2.h.
+	* config/sparc/sun4sol2.mh (NAT_FILE): Update.
+
+Wed Jan 31 17:20:26 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Handle software
+	floating point correctly.
+	(STORE_RETURN_VALUE): Likewise.
+	* config/pa/tm-pro.h (SOFT_FLOAT): define.
+
+Wed Jan 31 13:34:52 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): 
+	Define to what should be reasonable values.  However, apparently
+	a bug in linux mmap prevents mapped symbol tables from working.
+
+Tue Jan 30 18:26:19 1996  Fred Fish  <fnf@cygnus.com>
+
+	* defs.h (errno.h>:  Move #include closer to head of file to solve
+	obscure problem with systems that declare perror with const arg, in
+ 	both errno.h and stdio.h, and const is defined away by intervening
+ 	local include.
+
+Tue Jan 30 15:41:10 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Jon Reeves <reeves@zk3.dec.com>:
+	* i386-stub.c (getpacket): Change fprintf stream from "gdb" to stderr.
+	(mem_fault_routine): Fix misplaced volatile type qualifier in decl.
+
+Mon Jan 29 19:05:58 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (diststuff): Make all-doc; diststuff target does not
+	exist in doc/Makefile.in.
+
+Mon Jan 29 18:44:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/m88k/xm-cxux.h (BP_HIT_COUNT): Remove, never used.
+
+Mon Jan 29 00:10:35 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-valprint.c (calculate_array_length): New function to
+ 	determine the length of an array type.
+	(chill_val_print (case TYPE_CODE_ARRAY)): If the length of an
+	array type is zero, call calculate_array_length.
+
+	* gdbtypes.c (get_discrete_bounds (case TYPE_CODE_ENUM)): The
+ 	values may not be sorted. Scan all entries and set the real lower
+ 	and upper bound.
+
+Sun Jan 28 15:50:42 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/xm-linux.h: Move include of solib.h and #define of
+	SVR4_SHARED_LIBS from here ...
+	* config/nm-linux.h: ...to here.
+
+Sat Jan 27 10:34:05 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h.
+	Also check for gregset_t and fpregset_t types.
+	* configure: Regenerate.
+	* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
+ 	is defined.
+	(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
+ 	and HAVE_FPREGSET_T are defined.  These changes allow systems
+ 	like linux that are migrating to /proc support to use a single
+ 	configuration for both new and old versions.
+
+	* config/i386/linux.mt: Note that this is now for both a.out and
+	ELF systems.
+	* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
+	i386v4-nat.o
+	* config/i386/tm-linux.h (tm-sysv4.h): Include.
+	* config/i386/xm-linux.h (solib.h): Include
+	(SVR4_SHARED_LIBS): Define.
+	* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
+	(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
+	(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T
+ 	defined.
+
+Fri Jan 26 13:48:14 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/sparc/xm-sparc.h (NEW_SUN_CORE): Remove, never used.
+	* config/i386/xm-sun386.h: Ditto.
+	* config/m68k/xm-sun2.h, config/m68k/xm-sun3.h: Ditto.
+
+Thu Jan 25 16:05:53 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* Makefile.in (INSTALLED_LIBS, CLIBS): Include @LIBS@.
+
+Thu Jan 25 09:22:15 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	From Greg McGary  <gkm@gnu.ai.mit.edu>:
+	* dcache.c (dcache_peek, dcache_poke): Advance addr for
+	multi-byte I/O.
+
+Thu Jan 25 13:08:51 1996  Doug Evans (dje@cygnus.com)
+
+	* infrun.c (normal_stop): Fix test for shared library event.
+
+Thu Jan 25 03:26:38 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* configure.in (sparc64-*-*): Add default host configuration.
+	(sparc64-*-solaris2*): Add target configuration.
+	(sparc64-*-solaris2* host): Link statically if GCC used.
+	* configure: Regenerated.
+	* sparc/sp64sol2.mt: New file.
+
+Wed Jan 24 22:31:37 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* Makefile.in (RUNTEST): srcdir renamed to rootsrc.
+
+Wed Jan 24 15:42:24 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* Makefile.in (lint): Close backquotes.
+
+Wed Jan 24 13:19:10 1996  Fred Fish  <fnf@cygnus.com>
+
+	* NEWS: Make note of new record and replay feature for
+	remote debug sessions.
+	* serial.c (gdbcmd.h): Include.
+	(serial_logfile, serial_logfp, serial_reading, serial_writing):
+ 	Define here, for remote debug session logging.
+	(serial_log_command, serial_logchar, serial_write, serial_readchar):
+	New functions for remote debug session logging.
+	(serial_open): Open remote debug session log file when needed.
+	(serial_close): Close remote debug session log file when needed.
+	(_initialize_serial): Add set/show commands for name of remote
+	debug session log file.
+	* serial.h (serial_readchar): Declare
+	(SERIAL_READCHAR): Call serial_readchar().
+	(SERIAL_WRITE): Call serial_write().
+	(serial_close): Declare as extern.
+	(serial_logfile, serial_logfp): Declare.
+	* top.c (execute_command): Declare serial_logfp.  Log user command
+	in remote debug session log if log file is open.
+	* remote-array.c (array_wait): #ifdef out echo to gdb_stdout.
+	(array_read_inferior_memory): Rewrite to fix memory overwrite bug.
+	* remote-array.c (SREC_SIZE): Remove, duplicates define in
+	monitor.h.
+	* remote-array.c (hexchars, hex2mem):  Remove, unused.
+	* gdbserver/low-linux.c (store_inferior_registers): Remove
+	unnecessary extern declaration of registers[].
+	* gdbserver/Makefile.in (all): Add gdbreplay.
+	* gdbserver/gdbreplay.c: New file.
+	* gdbserver/README: Give example of recording a remote
+	debug session with gdb and then replaying it with gdbreplay.
+	
+Tue Jan 23 18:02:35 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* stabsread.c (rs6000_builtin_type):  Make bool type unsigned.
+	(read_one_struct_field):  Support boolean bitfields.
+	* c-valprint.c (c_val_print): Print booleans properly.
+
+Tue Jan 23 18:54:09 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual):
+	Remove, never used.
+	* config/sparc/vxsparc.mt (TDEPFILES): Add remote-vxsparc.o.
+
+Tue Jan 23 14:36:05 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* ch-exp.c (parse_tuple):  Error if invalid mode.
+
+	* value.h (COERCE_ARRAY):  Don't coerce enums.
+	(COERCE_ENUM):  Don't COERCE_REF.
+	(COERCE_NUMBER):  New macro (same as COERCE_ARRAY then COERCE_ENUM).
+	* valops.c (value_assign):  Only do COERCE_ARRAY if internalvar (let
+ 	value_cast handle it otherwise); do *not* COERCE_ENUM either way.
+	* valarith.c:  Use COERCE_NUMBER instead od COEREC_ARRAY.
+	Add COERCE_REF before COERCE_ENUM.
+	* values.c (value_as_long):  Simplify.
+
+	* valops.c (value_array):  Create internalvar if !c_style_arrays.
+
+	* language.c (lang_bool_type):  Add Fortran support.
+	* eval.c (OP_BOOL):  Use LA_BOOL_TYPE.
+
+Tue Jan 23 13:08:26 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup.
+	All references changed.
+	* breakpoint.c (bpstat_what): Add shlib_event to the class types.
+	Update state table.  Reformat so that it's still readable.
+	When we hit the shlib_event breakpoint, set the calss of shlib_event.
+	(breakpoint_1): Add "shlib events" as a breakpoint type.
+	Print the shlib_event breakpoint like other breakpoints.
+	(create_solib_event_breakpoint): New function.
+	(breakpoint_re_set_one): Handle solib_event breakpoints.
+	* breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type.
+	(enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS
+	action.
+	(create_solib_event_breakpoint): Declare.
+	* infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat.
+	(normal_stop): Inform the user when the inferior stoped due
+	to a shared library event.
+	(_initialize_infrun): Add new set/show variable "stop-on-solib-events"
+	to control whether or not gdb continues the inferior or stops it when
+	a shared library event occurs.
+	* minsyms.c (lookup_minimal_symbol_solib_trampoline): New function.
+	* somsolib.c (TODO list): Update.
+	(som_solib_create_inferior_hook): Arrange for gdb to be notified
+	when significant shared library events occur.
+	* hppa-tdep.c (find_unwind_entry): No longer static.
+
+Tue Jan 23 09:00:48 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* printcmd.c (print_insn): Pass fprintf_unfiltered to
+ 	INIT_DISASSEMBLE_INFO.
+
+Mon Jan 22 16:59:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (remotebreak): New GDB variable.
+	(remote_break): New global.
+	(remote_interrupt): Send a break instead of ^C if remote_break.
+	* NEWS: Describe the new variable.
+
+Mon Jan 22 16:24:11 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* sparc-tdep.c (_initialize_sparc_tdep): Always use print_insn_sparc.
+
+Fri Jan 19 07:19:38 1996  Fred Fish  <fnf@cygnus.com>
+
+	* hp300ux-nat.c (getpagesize): Remove unused function
+ 	fetch_core_registers.
+	(hp300ux_core_fns):  Remove, is unused.
+	(_initialize_core_hp300ux):  Remove, is unused.
+	(gdbcore.h):  Remove #include, no longer needed.
+	
+Fri Jan 19 00:59:53 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* rs6000-nat.c (exec_one_dummy_insn): Rework to avoid
+	ptrace bug in aix4.1.3 on the rs6000.
+
+Wed Jan 17 13:22:27 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-hms.c (hms_ops): Add value for to_thread_alive.
+	* remote-nindy.c (nindy_ops): Ditto.
+	* remote-udi.c (udi_ops): Ditto.
+
+Tue Jan 16 18:00:35 1996  James G. Smith  <jsmith@cygnus.co.uk>
+
+	* remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset,
+ 	pmon_checkset, pmon_make_fastrec, pmon_check_ack,
+	pmon_load_fast): New functions. Support for the PMON monitor world.
+	(common_open): New function to merge support for different monitors.
+	(mips_open): Use common_open().
+	(mips_send_command): New function.
+	(mips_send_packet): Scan out-of-sequence packets.
+	(mips_enter_debug, mips_exit_debug): New functions.
+	(pmon_ops): New target definition structure.
+	
+Tue Jan 16 11:22:58 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (CLIBS):  Add LIBS to allow libraries to be
+	specified on the make command line (via make LIBS=xxx).
+
+
+Fri Jan 12 21:41:58 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* symtab.c (find_pc_symtab): Don't lose if OBJF_REORDERED
+	is set but there are no psymtabs.
+
+Fri Jan 12 15:56:12 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* dsrec.c (load_srec): Remove unused variable.
+	* monitor.c (monitor_expect): Don't expect a ^C to echo.
+	* serial.c (serial_open): Add parallel interface.
+	* sh3-rom.c (parallel, parallel_in_use): New.
+	(sh3_load): If parallel_in_use, download though the
+	parallel port.
+	(sh3_open): Open parallel port if specified.
+	(sh3_close): New function.
+	(_inititalize_sh3): Add sh3_close hook and documentation.
+	* monitor.c (monitor_close): Export.
+	* monitor.h (monitor_close): Add prototype.
+
+Fri Jan 12 13:11:42 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
+	* remote.c (remotetimeout): New GDB variable, use to set the
+	remote timeout for reading.
+
+Fri Jan 12 07:14:27 1996  Fred Fish  <fnf@cygnus.com>
+
+	* lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h
+	to get "struct core_fns" defined.
+	* Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o):
+ 	Are dependent upon gdbcore_h.
+
+Thu Jan 11 23:13:24 1996  Per Bothner  <bothner@cygnus.com>
+
+	* symfile.c (decrement_reading_symtab):  New function.
+	* symfile.c, symtab.h (currently_reading_symtab):  New variable.
+	* symfile.c (psymtab_to_symtab):  Adjust currently_reading_symtab.
+	* gdbtypes.c (check_typedef):  Don't call lookup_symbol if
+	currently_reading_symtab (since that could infinitely recurse).
+
+Thu Jan 11 17:21:25 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* stabsread.c (read_struct_type):  Trivial simplification.
+
+	* stabsread.c (define-symbol):  Use invisible references
+	for TYPE_CODE_SET and TYPE_CODE_BITSTRING too.
+	* valops.c (call_function_by_hand):  Likewise.
+	* eval.c (evaluate_subexp_standard):  When known, use the formal
+	parameter type as the expected type when evaluating arg expressions.
+	* ch-lang.c (evaluate_subexp_chill):  Likewise (for MULTI_SUBSCRIPT).
+
+Thu Jan 11 10:08:14 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* main.c (main): Disable window interface if --help or --version
+	specified.
+
+Wed Jan 10 16:08:49 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* configure.in, configure: Recognize rs6000-*-aix4*.
+	* config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
+	* config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
+	* config/rs6000/xm-aix4.h: New file.
+	* config/xm-aix4.h: New file.
+
+Wed Jan 10 11:25:37 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
+	* gdbserver/low-linux.c: New file.
+	* remote.c (remote_read_bytes): Fix aborts on larger packets.
+
+	* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
+	Define.
+	* stabsread.c (define_symbol): If register value is too large,
+	tell what it is and what max is.
+
+Tue Jan  9 09:33:53 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* hpread.c (hpread_build_psymtabs): Finish Jan 4th 
+	enum namespace -> enum_namespace change.
+
+Tue Jan  9 04:44:47 1996  Wilfried Moser  <moser@rtl.cygnus.com>
+
+	* ch-exp.c (parse_primval): In case ARRAY, add missing
+	FORWARD_TOKEN ().
+
+Mon Jan  8 13:29:34 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-mips.c (mips_receive_header): Recognize \012 instead
+	of \n, but write \n when program sends a \012.
+	* ser-mac.c (mac_input_buffer): Increase size of buffer.
+
+Mon Jan  8 12:00:40 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* infptrace.c (initialize_infptrace): Move function out of
+	#ifdef conditional; put code within the function inside an
+	#ifdef conditional.
+
+	* buildsym.c (end_symtab): Remove sort_pending and sort_linevec
+	arguments.  Sorting is now dependent on OBJF_REORDERED.  All
+	callers/references changed.
+	* dbxread.c (read_ofile_symtab): Correctly determine value for
+	last_source_start_addr for reordered executables.
+	(process_one_symbol): Handle N_FUN with no name as an end of
+	function marker.
+	* partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE
+	is the high text address for a psymtab.
+	(case N_SO): Likewise.
+	(case N_FUN): Handle N_FUN with no name as an end of function
+	marker.
+	* minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols
+	at the same address rather than a random subset of them.
+	* coffread.c (coff_symfile_init): Set OBJF_REORDERED.
+	* elfread.c (elf_symfile_init): Similarly.
+	* somread.c (som_symfile_init): Similarly.
+	* xcoffread.c (xcoff_symfile_init): Similarly.
+
+Fri Jan  5 17:46:01 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* stack.c (print_stack_frame print_frame_info) symmisc.c
+	(dump_symtab):  Change RETURN_MASK_ERROR to RETURN_MASK_ALL so
+	that catch_errors doesn't get blindsided by QUIT and lose the
+	cleanup chain.  This fixes a problem where ^C while in a
+	user-defined command sometimes leaves instream NULL and causes a
+	segfault in command_loop.
+
+Fri Jan  5 13:59:16 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* configure.in, configure: Add `-ldl -lw' for Solaris linking.
+
+Fri Jan  5 12:02:00 1996  Steve Chamberlain  <sac@slash.cygnus.com>
+
+	* config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt,
+	config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt:
+	srec.o renamed to dsrec.o.
+
+Thu Jan  4 16:04:54 1996  Stu Grossman  (grossman@cygnus.com)
+
+	* breakpoint.c (remove_breakpoint):  Change error to warning so
+	that hardware watchpoint removal problems won't leave breakpoint
+	traps in the target.
+	* remote-e7000.c (e7000_insert_breakpoint,
+	e7000_remove_breakpoint):  Use e7000 based breakpoints, not memory
+	breakpoints.
+	* (e7000_wait):  Adjust PC back by two when we see a breakpoint to
+	compensate for e7000 maladjustment.
+	* sparcl-tdep.c (sparclite_check_watch_resources):  Fix logic bug
+	which prevented hardware watchpoints from working.
+
+Thu Jan  4 10:44:17 1996  Fred Fish  <fnf@cygnus.com>
+
+	* infptrace.c (udot_info): New function.
+	(PT_*): Define each individually if that one is not defined.
+	* rs6000-nat.c (kernel_u_size): New function
+	Include <sys/user.h> for "struct user"
+	* alpha-nat.c (kernel_u_size): New function.
+	Include <sys/user.h> for "struct user"
+	* sparc-nat.c (kernel_u_size): New function.
+	Include <sys/user.h> for "struct user"
+	* i386b-nat.c (kernel_u_size): New function.
+	* i386v-nat.c (kernel_u_size): New function.
+	* config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
+	(kernel_u_size): Declare.
+	* config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
+	(kernel_u_size): Declare.
+	* config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
+	(kernel_u_size): Declare.
+	* config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
+	(kernel_u_size): Declare.
+	* config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
+	(kernel_u_size): Declare.
+
+Thu Jan  4 11:00:01 1996  steve chamberlain  <sac@slash.cygnus.com>
+
+	* mdebugread.c (mylookup_symbol): enum namespace becomes
+	enum_namespace 	type.
+	* symfile.c (add_psymbol_to_list)
+	(add_psymbol_addr_to_list): Ditto.
+	* symtab.c (lookup_partial_symbol): Ditto.
+	(lookup_symbol): Ditto.
+	(lookup_block_symbol): Ditto.	
+	* win32-nat.c (handle_load_dll): Use incoming dll base.
+	(child_wait): Catch DLL load errors.
+	(create_child_inferior): Translated between paths correctly.
+
+Wed Jan  3 23:13:53 1996  Fred Fish  <fnf@cygnus.com>
+
+	* i386v4-nat.c (supply_gregset, fill_gregset): Subtract NUM_FREGS
+ 	from NUM_REGS to get number of general registers that we care about.
+	* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
+	of number of general regs and number of floating point regs.
+
+Wed Jan  3 19:49:54 1996  steve chamberlain  <sac@slash.cygnus.com>
+
+	* config/i386/tm-win32.h (IN_SOLIB_CALL_TRAMPOLINE): New.
+	(SKIP_TRAMPOLINE_CODE): New.
+	* config/i386/xm-win32.h (CANT_FORK): Deleted.
+	(SLASH*) Changed to use unix style slash.
+	* symtab.h (namespace enum): becomes typedef to avoid namespace
+	collision in C++. 
+	* infcmd.c (path_command): Use empty string if PATH name not set.
+	* i386-tdep.c (skip_trampoline_code): New function.
+	* srec.c: Renamed dsrec.c to avoid filename collision.
+	* Makefile.in: Cope with renaming.
+	
+Wed Jan  3 13:09:04 1996  Fred Fish  <fnf@cygnus.com>
+
+	* symmisc.c (print_objfile_statistics): Print memory use statistics
+	for objfile psymbol, symbol, and type obstacks.
+
+Tue Jan  2 13:41:14 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/mips/nm-irix5.h: Restore.
+	(TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
+	from Lee Iverson <leei@ai.sri.com>.
+	* config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
+	* config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
+
+For older changes see ChangeLog-95
+
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-97 b/gdb/ChangeLog-97
new file mode 100644
index 0000000..4f9a949
--- /dev/null
+++ b/gdb/ChangeLog-97
@@ -0,0 +1,2855 @@
+Wed Dec 31 11:43:53 1997  Mark Alexander  <marka@cygnus.com>
+
+	* dsrec.c (load_srec): Check remotedebug flag when printing
+	debug info.
+
+Wed Dec 31 10:33:15 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* breakpoint.c (breakpoint_re_set): add _siglongjmp to list of
+	longjmp breakpoints.
+
+Mon Dec 29 21:25:34 1997  Mark Alexander  <marka@cygnus.com>
+
+	* dve3900-rom.c: New file to support Densan DVE-R3900/20 board.
+	* monitor.c (monitor_debug): Move to utils.c, rename to puts_debug.
+	(monitor_write_memory, monitor_read_memory, monitor_insert_breakpoint,
+	monitor_remove_breakpoint): Remove useless address bits if current
+	monitor has MO_ADDR_BITS_REMOVE flag.
+	* monitor.h (MO_ADDR_BITS_REMOVE): Define.
+	* utils.c (puts_debug): Formerly monitor_debug from monitor.c;
+	move here and make public.  Add better support for carriage returns.
+	* defs.h (puts_debug): Declare.
+	* dsrec.c (load_srec): Use puts_debug to print remotedebug information.
+	Output header record correctly.
+	(make_srec): Output a header record instead of a termination record
+	if sect is non-NULL (value is ignored), but abfd is NULL.
+	* config/mips/tm-tx39.h (DEFAULT_MIPS_TYPE): Remove definition.
+	(REGISTER_NAMES): Define to add R3900-specific registers.
+	* config/mips/tm-tx39l.h: Ditto.
+	* config/mips/tx39.mt (TDEPFILES): Add dve3900-rom.o and support files.
+	* config/mips/tx39l.mt: Ditto.
+
+Wed Dec 24 12:48:48 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dsrec.c: Cosmetic improvements.
+	(make-srec): Change indexing of format and code tables to
+	remove confusing empty entries.
+
+Mon Dec 22 21:51:53 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c (_initialize_remote_mips): Fix DDB doc string.
+
+Sun Dec 21 17:00:06 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* d30v-tdep.c (d30v_frame_find_saved_regs): split most of
+	function off into d30v_frame_find_saved_regs_offsets;
+	(d30v_frame_find_saved_regs_offsets): new function.  Got
+	backtrace working when calling from framefull (unoptimized)
+	routines (.e.g, main) into frameless (optimized) routines
+	(e.g., printf).
+
+Fri Dec 19 09:49:49 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* d30v-tdep.c (d30v_frame_chain): test end_of_stack
+	(d30v_frame_find_saved_regs): set it.
+	* config/d30v/tm-d30v.h: improved FRAME_CHAIN_VALID
+
+Thu Dec 18 12:34:28 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	From Gavin Koch <gavin@cygnus.com>: mips-tdep.c
+ 	* (mips_push_arguments): For big-endian shorts and char's store at
+ 	* the correct location.
+
+Thu Dec 18 00:26:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): Delete check that symbols
+ 	for file not already loaded.  Did not work when an include file
+ 	was involved.
+
+Wed Dec 17 10:43:04 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* elfread.c (elf_symfile_read): Since the partial symbol table is
+ 	searched last in first, insert mdebug or XCOFF info into the
+ 	partial symbol table before any DWARF2 info.
+
+Thu Dec 18 00:00:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* symfile.c (init_psymbol_list): Handle init with zero elements.
+
+	* elfread.c (elf_symfile_read): If `mainline', clear psymbol table
+ 	using init_psymbol_list 0.  For build_psymtabs functions, pass
+ 	mainline==0 so that psymbol_list isn't re-initialized.
+
+	* symfile.c (discard_psymtab): New function, correctly unlink an
+ 	empty psymtab from an object file.
+	* dbxread.c (end_psymtab): Call discard_psymtab.
+	* xcoffread.c (xcoff_end_psymtab): Ditto.
+	* hpread.c (hpread_end_psymtab):  Ditto.
+	* os9kread.c (os9k_end_psymtab):  Ditto.
+
+Wed Dec 17 10:47:05 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (set_raw_tracepoint): initialize addr_string
+	to NULL; (trace_actions_command): call readline_begin_hook only
+	if from_tty is true.
+
+Tue Dec 16 20:05:48 1997  Mark Alexander  <marka@cygnus.com>
+
+	* configure.tgt: Change little-endian tx39 target name to tx39l.
+
+Tue Dec 16 11:24:30 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* remote-sim.c (gdbsim_open): Use "--architecture" instead of
+	ambigious short form.
+	
+Tue Dec 16 10:29:16 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* d30v-tdep.c (d30v_frame_chain): don't or in DMEM_START to
+	FP_REGNUM value before return; (prologue_find_regs): two sets
+	of offsets -- frame pointer and stack pointer, not just one that
+	tries to do double duty; (d30v_frame_find_saved_regs): stop once
+	we hit pc (in case we're stopped in the middle of the prologue)
+	and improve handling of frameless prologues; (d30v_push_arguments):
+	*ALL* arguments go on the stack until we run out of args registers,
+	force sp to be 8 byte aligned.
+
+	* config/tm-d30v.h (EXTRACT_STRUCT_VALUE_ADDRESS): fix, it's r2,
+	not r0; (FRAME_CHAIN_VALID): handle use of external memory;
+	(STACK_ALIGN): define.
+
+Mon Dec 15 15:13:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_wait): When HAVE_SIGACTION and SA_RESTART
+ 	intall cntrl-c handler with SA_RESTART clear.  On BSD systems this
+ 	stops read syscalls's being restarted.
+
+	* configure.in (configdirs): Check for sigaction.
+	* configure: Re-generate.
+
+Mon Dec 15 11:38:52 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* dwarf2read.c: From change proposed by Gavin Koch.
+ 	(address_significant_size): New static variable.
+ 	(dwarf2_build_psymtabs_hard): Check consistency between
+ 	`address_size' and `address_significant_size'.
+	(read_address): MASK out all but the significant bits, as
+ 	determined by `address_significant_size', of any addresses.
+	(elf-bfd.h): Include.
+	(dwarf2_build_psymtabs_hard): Set `address_significant_size'
+ 	according to the arch_size of the elf object file.
+
+Thu Dec 11 13:40:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* dwarf2read.c (dwarf_decode_lines): Change type of address to
+ 	CORE_ADDR.
+
+Thu Dec 11 14:28:01 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (trace_find_command): don't error if going
+	backwards thru the trace buffer in a loop.
+	* (struct tracepoint): delete unused field.
+
+Wed Dec 10 17:57:00 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* d30v-tdep.c : don't bury lots of magic numbers in the code
+	instead use defines for the opcodes and opcode masks; update
+	to use actual d30v patterns; fix register sizes to be 4 bytes
+	not 2 bytes; improve prologue testing now that we have a C
+	compiler; fix stack frame handling enough to get backtraces
+	working; initial changes to push and pop frames (so that gdb
+	can call functions in the inferior).
+
+	* config/d30v/tm-d30v.h: update DMEM_START, IMEM_START, and
+	STACK_START; change FR_REGNUM to 61 (was 11).  Reformat comment
+	about DUMMY FRAMES so that it is readable.  Fix SAVED_PC_AFTER_FRAME
+	macro.
+
+Wed Dec 10 17:41:07 1997  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ch-valprint.c (chill_val_print): To avoid segfaults, don't print
+ 	a string whose dynamic length is longer than its static length.
+
+Wed Dec 10 15:54:00 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* dwarf2read.c (dwarf2_build_psymtabs_hard): Check
+ 	cu_header.length is within dwarf_info_buffer not
+ 	dwarf_abbrev_buffer.
+	
+Mon Dec  8 14:28:49 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (memrange_sortmerge): allow for memranges 
+	that overlap.  (collect_pseudocommand etc.) cleanup decls.
+
+Fri Dec  5 09:22:35 1997  Nick Clifton  <nickc@cygnus.com>
+
+	* config/v850/tm-v850.h (BREAKPOINT): Reverted back to old value...
+
+Thu Dec  4 09:30:22 1997  Nick Clifton  <nickc@cygnus.com>
+
+	* config/v850/tm-v850.h (BREAKPOINT): Changed to match new value.
+
+Wed Dec  3 12:44:15 1997  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c: Add declaration for x_command.
+
+	* printcmd.c (x_command): Remove static declaration.
+
+Wed Dec  3 12:00:42 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (finish_tfind_command): call do_display so that
+	auto-displays are updated by tfind.  Also, keep track of frame
+	and current-function so that tfind behaves like stepping (only
+	show the stack frame if we step into a new function or return).
+
+Wed Dec  3 14:14:58 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* sol-thread.c: additional support for debugging threaded core
+	files on solaris; previously only kernel threads were found --
+	user threads generated errors.
+	* corelow.c: don't register core_ops as a target if
+	coreops_suppress_target is true (set by sol-thread.c).
+
+Tue Dec  2 14:53:09 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c: make "tdump" command handle literal memranges.
+
+Tue Dec  2 11:34:48 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c: use "lookup_cmd" to parse actions commands
+	(thus allowing unambiguous prefixes and aliases).
+
+Tue Dec  2 10:15:57 1997  Nick Clifton  <nickc@cygnus.com>
+
+	* configure.tgt: Add support for Thumb target.
+
+Tue Dec  2 10:14:15 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c: move prototype of validate_actionline(), and
+	make it consistent with the function declaration.
+
+Thu Nov 27 09:07:18 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* Makefile.in (tracepoint_h): New macro for tracepoint.h
+	includes.
+	(tracepoint.o): Add rule to build.
+
+Wed Nov 26 22:59:04 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* remote-sim.c (gdbsim_cntrl_c): Lose ANSI prototype.
+
+	* tracepoint.c (set_raw_tracepoint): fix typo
+
+Wed Nov 26 11:33:09 1997  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c (set_raw_tracepoint): Make sure there's a trailing
+ 	slash on the directory name.
+
+	* top.c (get_prompt): New function.
+	* top.h: Declare it.
+
+Wed Nov 26 09:59:47 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* dwarf2read.c (struct comp_unit_head): Change length and
+ 	abbrev_offset fields to unsigned int.
+	(dwarf2_build_psymtabs_hard): Verify length and offset read from
+ 	.debug_info section.
+
+Mon Nov 24 19:36:34 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c, tracepoint.h: new module, implements tracing,
+	which is a new functionality somewhat like breakpoints except
+	that a tracepoint stops the inferior only long enough to collect
+	and cache selected buffers and memory locations, then allows 
+	the inferior to continue; the cached trace data can then be 
+	examined later.
+
+Mon Nov 24 14:17:02 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* infcmd.c: export registers_info, for use by other modules.
+	* printcmd.c: export output_command, for use by other modules.
+	* stack.c: export locals_info and args_info, for use by other modules.
+	* remote.c: export getpkt, putpkt, and fromhex for external use.
+	  Make fromhex case-insensative.  New function "remote_console_output"
+	  abstracts the acceptance of "O" packets from target.
+	  Make all "remotedebug" output go to stdout, not stderr.
+
+Mon Nov 24 08:59:28 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* valprint.c (print_longest): When CC has long long but printf
+ 	doesn't, print decimal value as three parts.
+
+	* config/i386/tm-fbsd.h: New file.
+	* config/i386/fbsd.mt (TM_FILE): Change to tm-fbsd.h.
+
+	* config/i386/nm-fbsd.h (FLOAT_INFO): Move definition from here.
+ 	* config/i386/tm-fbsd.h (FLOAT_INFO): To here.
+
+	* configure.in (PRINTF_HAS_LONG_LONG): Check full functionality of
+ 	%ll format specifier.
+	(SCANF_HAS_LONG_DOUBLE): Check the scanf family for support of
+ 	long double using %Lg.
+	* acconfig.h: Provide default undef for SCANF_HAS_LONG_DOUBLE.
+	* configure: Re-generate.
+	
+	* c-exp.y (parse_number): Use sscanf %Lg when host has
+ 	SCANF_HAS_LONG_DOUBLE not PRINTF_HAS_LONG_DOUBLE
+
+Sun Nov 23 17:12:58 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* printcmd.c (print_insn): Set the machine type if known.
+
+	* i386-tdep.c (_initialize_i386_tdep): Delete "set
+ 	assembly-language" command.  Replaced by generic "set
+ 	architecture". Set initial machine using bfd_lookup_arch.
+
+Fri Nov 21 19:43:23 1997  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* valops.c (call_function_by_hand): If the function has a
+	prototype, convert its arguments as if by assignment.  Otherwise,
+	do the usual promotions. 
+	* stabsread.c (define_symbol): Set the TYPE_FLAG_PROTOTYPED flag
+ 	on functions' types when we can; all C++ functions should get it,
+	and if the Sun-style prototype notation is in the stabs, we can
+	notice that.
+
+Fri Nov 21 12:20:16 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* aclocal.m4 (AM_CYGWIN32, AM_EXEEXT): Remove.  They are already
+ 	defined by the inclusion of ../bfd/aclocal.m4.
+	* configure: Rebuild.
+
+Fri Nov 21 10:52:39 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* Makefile.in (SHELL): Really do the change.
+
+Fri Nov 21 02:19:57 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* Makefile.in: also revert SHELL change until configury
+	changes work
+
+Thu Nov 20 16:35:13 1997  Doug Evans  <devans@canuck.cygnus.com>
+
+	* sparc-tdep.c (sparc_pc_adjust): Don't assume sizeof (long) == 4.
+
+Thu Nov 20 04:11:27 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* aclocal.m4: add EXEEXT setting rule
+	* configure.in: call it
+	* configure: regenerate
+	* Makefile.in: pepper with EXEEXTs in appropriate places,
+	set SHELL = @SHELL@ for those lame hosts that don't have a /bin/sh
+	For some reason, EXEEXT isn't getting substututed in correctly
+	so for now, set EXEEXT to empty string
+
+Mon Nov 17 15:35:06 1997  Doug Evans  <devans@canuck.cygnus.com>
+
+	* Makefile.in (remote-sim.o): Depend on $(INCLUDE_DIR)/callback.h.
+
+Fri Nov 14 13:04:34 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* jv-exp.y (copy_exp, insert_exp): Avoid ANSI prototypes.
+
+Thu Nov 13 09:47:35 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* d30v-tdep.c (d30v_print_flags): Function to print the d30v flags
+	in a human readable format.
+	(print_flags_command): Command wrapper to call d30v_print_flags.
+	(d30v_do_registers_info): When printing out all of the registers,
+	print out the flag values in a human readable fashion.
+	(_initialize_d30v_tdep): Add info flags command to print the
+	flags.
+
+	* config/d30v/tm-d30v.h (PSW_*): Add macros for each of the PSW
+	bits that are defined.
+
+Wed Nov 12 14:58:39 1997  Jeff Holcomb  <jeffh@cygnus.com>
+
+	* symfile.c (generic_load): Handle cancel from the
+	ui_load_progress_hook routine.
+	* dsrec.c (load_srec): Handle cancel from the
+	ui_load_progress_hook routine.
+
+Mon Nov 10 15:13:13 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* valprint.c (print_longest): The b, h, w, and g format specifiers
+ 	print unsigned values.
+
+Mon Nov 10 02:02:49 1997  Martin M. Hunt  <hunt@cygnus.com>
+
+	* top.c (quit_confirm): Change exit message.
+
+Tue Nov  4 16:52:50 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/i386/cygwin32.mh: because cygwin.dll calls malloc/realloc
+	to allocate memory for environ space, gdb cannot use memory
+	checks -- set -DNO_MMCHECK
+
+Tue Nov  4 13:50:59 1997  Jim Blandy  <jimb@sendai.cygnus.com>
+
+	* jv-exp.y (ArrayAccess): Implement Name [ Expression ]; check the
+ 	code to see why this is not trivial.
+	(copy_exp, insert_exp): New functions.
+	
+Fri Oct 24 17:24:00 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* dwarf2read.c (dwarf2_build_psymtabs_hard): Handle the case
+	where a compilation unit die has no children (DW_TAG_compile_unit
+	has DW_children_no).
+	(scan_partial_symbols): Add comment for nesting_level.
+
+Wed Oct 29 15:53:24 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* solib.c (solib_break_names): add entry for Solaris 2.6 run
+ 	time linker.  From Casper Dik via Peter Schauer.
+
+Tue Oct 28 17:31:47 1997  Martin M. Hunt  <hunt@cygnus.com>
+
+	* configure.in (configdir): Add  -lcomdlg32 and -ladvapi32
+	to WIN32LIBS.
+
+	* configure: Rebuild
+
+Fri Oct 24 16:48:21 1997  David Taylor  <taylor@texas.cygnus.com>
+
+	* sol-thread.c (sol_find_new_threads_callback,
+	sol_find_new_threads): New functions.
+	* config/sparc/nm-sun4sol2.h (FIND_NEW_THREADS): New macro, invoke
+	sol_find_new_threads.
+	* thread.c (info_threads_command): invoke FIND_NEW_THREADS if it
+	is defined.
+
+Thu Oct 23 16:16:04 1997  Jeff Law  (law@fast.cs.utah.edu)
+
+	* dbxread.c (process_one_symbol): Put back initialization
+	of a variable lost during last change.  Don't perform
+	assignment inside conditionals.
+	* stabsread.c (symbol_reference_defined): Return -1 for error/not
+	found.  All callers changed appropriately.
+	(define_symbol): Don't perform assignment inside conditionals.
+
+Wed Oct 22 13:04:52 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mdebugread.c (psymtab_to_symtab_1): Handle new live range stabs
+	entries.
+
+	* dbxread.c: More comment cleanups.
+	* stabsread.c: Fix various violations of the GNU coding and
+	formatting standards.  Update/add comments to make code clearer.
+	(resolve_reference): Delete unused function.
+	(ref_search_val): Remove function.  It didn't belong in stabsread.c
+	(resolve_live_range): No longer returns a value.  Do not add it
+	to the live range list until the entire range stab has been parsed.
+	(get_substring): Remove duplicate declaration.
+	(resolve_symbol_reference): Now static.  Remove unnecessary code
+	to deal with cleanups.
+	(ref_add): Use xrealloc instea of realloc.
+	(process_reference): Reorganize slightly to make clearer.
+	* stabsread.h (resolve_symbol_reference): Remove declaration.
+	(resolve_reference): Likewise.
+	* symtab.c (find_active_alias): New function.
+	(lookup_block_symbol): Use find_active_alias.
+	* symtab.h (struct range_list): Fix dangling struct live_range
+	reference.
+	(ref_search_val): Remove decl.
+
+	* symtab.h (struct range_list): Renamed from struct live_range.
+	(struct symbol): Remove struct live_range_info substruct.
+	Bring the alias list and range list fields up to the toplevel
+	as "aliases" and "ranges".
+	(SYMBOL_ALIASES, SYMBOL_RANGES): Corresponding changes.
+	(SYMBOL_RANGE_START, SYMBOL_RANGE_END, SYMBOL_RANGE_NEXT): Delete.
+	* stabsread.c: Corresponding changes.
+
+	* dbxread.c: Fix various violations of the GNU coding and
+	formatting standards.  Update/add comments to make code
+	clearer.
+	(process_later): Use xrealloc instead of realloc.  
+
+	* symtab.c: Include inferior.h.
+
+Tue Oct 21 14:15:26 1997  Per Bothner  <bothner@cygnus.com>
+
+	* ch-exp.c:  Rename FIELD_NAME to DOT_FIELD_NAME (to avoid conflict).
+
+Fri Oct 17 13:22:02 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* infcmd.c: Improve grammar of "set args" help.
+
+Thu Oct 16 15:03:58 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* remote-sds.c (sds_load): Properly declare as static.
+
+Wed Oct 15 10:27:14 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Mask off displacement
+	to 30 bits in call insn to handle --enable-64-bit-bfd.
+	(STORE_STRUCT_RETURN): Change to handle --enable-64-bit-bfd.
+
+Tue Oct 14 22:13:27 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* stabsread.c: Make ref_map entries dynamically allocated.
+
+Thu Oct  9 12:37:57 1997  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* printcmd.c (print_address_symbolic, address_info): Mask
+ 	target-specific flag bits from PC, for more aesthetic disassembly.
+  	* config/mips/tm-mips.h: Added PC masking for MIPS family
+ 	(especially the MIPS16).
+
+Sat Oct  4 18:45:44 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c (mips-initialize): Work around flakiness in
+	some versions of PMON after loading a program.
+
+Fri Oct  3 15:49:18 1997  Per Bothner  <bothner@cygnus.com>
+
+	* c-lang.h, cp-valprint.c (static_field_print):  Make non-static.
+	* parse.c, parser-defs.h (length_of_subexp):  Make non-static.
+	* jv-exp.y (FieldAccess):  Handle dollar-VARIABLE as primary.
+	(ArrayAccess):  Likewise.  Also remove warnings.
+	(CastExpression):  Implement (typename) UnaryExpression.
+	(push_qualified_expression_name):  Fix small bug.
+	* jv-lang.c:  Use TYPE_TAG_NAME, not TYPE_NAME for class names.
+ 	(_initialize_jave_language):  Fix typo (jave -> java).
+	(java_language):  Java does *not* have C-style arrays.
+	(java_class_from_object):  Make more general (and complicated).
+	(java_link_class_type):  Fix typo "super" -> "class".  Handle arrays.
+	(java_emit_char, java_printchar):  New function.
+	(evaluate_subexp_java case BINOP_SUBSCRIPT):  Handle Java arrays.
+	* jv-valprint.c (java_value_print):  Implement printing of Java arrays.
+	(java_print_value_fields):  New function.
+	(java_val_print):  Better printing of TYPE_CODE_CHAR, TYPE_CODE_STRUCT.
+
+Fri Oct  3 09:52:26 1997  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips/tm-mips.h (MAKE_MSYMBOL_SPECIAL): Force MIPS16
+	addresses to be odd.
+	(MIPS_FPU_SINGLE_REGSIZE, MIPS_FPU_DOUBLE_REGSIZE): Define.
+	* mips-tdep.c (mips_extract_return_value): Doubles aren't
+	returned in FP0 if FP registers are single-precision only.
+
+Mon Sep 29 23:03:03 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (set_reg_offset): New function.
+	(mips16_heuristic_proc_desc): Calculate offsets of registers
+	saved by entry pseudo-op after rest of prologue has been read.
+	Use set_reg_offset to ignore all but the first save of a given
+	register.
+	(mips32_heuristic_proc_desc): Initialize frame adjustment value.
+	* remote-sim.c (gdbsim_store_register): Don't update registers
+	that have a null or empty name.
+	* findvar.c (read_register_bytes): Don't fetch registers
+	that have a null or empty name.
+
+Tue Sep 30 13:35:54 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/mips/tm-mips.h (NUM_REGS): Define conditionally.
+	(REGISTER_NAMES): Ditto.
+
+Fri Sep 26 21:08:22 1997  Keith Seitz  <keiths@pizza.cygnus.com>
+
+	* dsrec.c (load_srec): add ui_load_progress_hook to 
+	display some feedback to user
+
+	* symfile.c (generic_load): add ui_load_progress_hook to
+	display some feedback to user
+
+Fri Sep 26 17:32:22 1997  Jason Molenda  (crash@pern.cygnus.com)
+
+	* command.c (add_cmd, add_show_from_set): Insert new commands in
+	alphabetical order.
+
+Fri Sep 26 12:22:00 1997  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips-tm-mips.h (mips_extra_func_info): New frame_adjust
+	member for storing offset of MIPS16 frame pointer from SP.
+	* mips-tdep.c: Use RA_REGNUM instead of hardcoded 31 throughout.
+	(PROC_FRAME_ADJUST): Define.
+	(mips16_heuristic_proc_desc): Store frame pointer adjustment value.
+	(get_frame_pointer): Use frame pointer adjustment value when
+	calculating frame address.
+	* remote-sim.c (gdbsim_fetch_register): Don't fetch registers
+	that have a null or empty name.
+
+Fri Sep 26 12:40:51 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mips-tdep.c (_initialize_mips_tdep): Allow target files to
+	override default FPU type.
+
+Fri Sep 26 10:33:54 1997  Felix Lee  <flee@cygnus.com>
+
+	* configure.tgt (v850-*-*): necmsg.lib instead of v850.lib.
+
+Wed Sep 24 14:02:09 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/v850/tm-v850.h (BREAKPOINT): Use 1 word DIVH insn with
+ 	RRRRR=0 for simulator breakpoint. Previous breakpoint insn was two
+ 	words.
+
+Thu Sep 18 15:07:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ser-e7kpc.c (get_ds_base): Only use under Windows.
+	(windows.h): Include when any _WIN32 host.
+
+Wed Sep 24 18:12:47 1997  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* The following block of changes add support for debugging assembly
+	source files.
+	* breakpoint.c (resolve_sal_pc):  Prevent crash when pc isn't
+	associated with a function.
+	* buildsym.c (record_line start_symtab end_symtab):  Don't delete
+	symtabs which only have line numbers (but no other debug symbols).
+	* dbxread.c (read_dbx_symtab end_psymtab):  Ditto.
+
+	* remote-sim.c:  New functions gdbsim_insert/remove_breakpoint.  Use
+	intrinsic simulator breakpoints if available, otherwise do it the
+ 	hard way.
+
+	* configure.tgt:  Add d30v.
+	* d30v-tdep.c:  New file.
+	* config/d30v/d30v.mt, config/d30v/tm-d30v.h:  New files.
+
+Tue Sep 23 11:24:13 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (ALLCONFIG): Remove, inaccurate and never used.
+
+Tue Sep 23 00:08:18 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (mips_push_arguments):  Tweak alignment of register
+	value if the remaining length of a non-integral argument is smaller
+	than the register size for big-endian non-EABI mode.
+
+	* rs6000-tdep.c (branch_dest):  Handle return from signal
+	handler function via sigreturn kernel call.
+
+Mon Sep 22 15:32:06 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* stabsread.h, symtab.h, dbxread.c, symtab.c, stabsread.c:
+	Fix prototypes.  Remove function scoped function declarations.
+
+Fri Sep 19 18:51:26 1997  Felix Lee  <flee@cygnus.com>
+
+	* config/i386/windows.mh (XDEPFILES): need to list some files
+ 	explicitly, for odd reasons.
+
+Tue Sep 16 20:00:05 1997  Per Bothner  <bothner@cygnus.com>
+
+	* jv-exp.y (push_fieldnames):  New, to handle EXP.FIELD1....FIELDN.
+	(push_expression_name):  New, to handle expression names.
+	(push_qualified_expression_name):  New, for qualified expression names.
+	(parse_number):  Fix bugs in parsing of non-decimal integers.
+	* jv-lang.h, jv-lang.c (java_demangle_type_signature):  New.
+	* jv-lang.c (type_from_class):  Just use name with java_lookup_class.
+	(java_link_class_type):  Add dummy "class" field.
+	(java_lookup_type):  New.
+	(evaluate_subexp_java case STRUCTOP_STRUCT):  Force to address.
+	* jv-typeprint.c (java_type_print_base):  Don't print "class" field.
+	Use java_demangle_type_signature to print array class types.
+	* jv-valprint.c (java_value_print):  Preliminary array support.
+	Print pointer as TYPE@HEXADDR, instead of (TYPE)0xHEXADDR.
+	(java_val_print):  Move check for object type to java_value_print.
+	Check for null.  Print pointer as @HEXADDR, not 0xHEXADDR.
+
+	* valops.c (search_struct_field):  Search basesclasses in
+	ascending, not descending order.  Hack to avoid virtual baseclass
+	botch for Java interfaces.
+
+Tue Sep 16 19:56:23 1997  Per Bothner  <bothner@cygnus.com>
+
+	* util.c (run_cleanup_chain, make_run_cleanup, do_run_cleanups):
+	New cleanup clean for cleanups to be run when at each 'run' command.
+	* infcmd.c (run_command):  Call do_run_cleanups.
+
+	* solib.c (find_solib):  Register cleanup to call clear_solib
+	on a new 'run' command.
+	(symbol_add_stub):  First look for existing objfile with same name.
+
+Tue Sep 16 16:00:01 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-sds.c (sds_load): New function.
+	(sds_ops): Use it.
+	(sds_open): Don't set inferior_pid yet.
+	(sds_kill): Remove contents.
+	(sds_create_inferior): Rewrite to work more like monitor
+ 	interfaces.
+	(sds_restart): Remove, no longer used.
+
+	* monitor.h (MO_SREC_ACK_PLUS, MO_SREC_ACK_ROTATE): New flags.
+	* monitor.c (monitor_wait_srec_ack): Add DINK32-specific ack code.
+	* dsrec.c (load_srec): Always write a header S-record.
+	* dink32-rom.c (dink32_regnames): Fix the names of float registers.
+	(dink32_cmds): Set to use S-record downloading with acks.
+	* remote-est.c (est_cmds): Add MO_SREC_ACK_PLUS flag.
+
+Tue Sep 16 10:08:27 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/v850/tm-v850.h (BREAKPOINT): Set to a truely illegal
+ 	instruction.
+
+	* exec.c (exec_file_command): Call set_architecture_from_file.
+
+Mon Sep 15 13:01:22 1997  Mark Alexander  <marka@cygnus.com>
+
+	* dbxread.c (MSYMBOL_SIZE): New macro.
+	(end_psymtab): Use MSYMBOL_SIZE to extract size from minimal symbol.
+	* elfread.c (elf_symtab_read): If ELF symbol is "special",
+	such as a MIPS16 function, mark minimal symbol as special too.
+	* mips-tdep.c (pc_is_mips16): New function to check whether
+	a function is MIPS16 by looking at the minimal symbol.  Use
+	pc_is_mips16 throughout instead of IS_MIPS16_ADDR macro.
+	* config/mips/tm-mips.h (SYMBOL_IS_SPECIAL, MAKE_MSYMBOL_SPECIAL,
+	MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): New functions for setting/testing
+	"special" MIPS16 bit in ELF and minimal symbols.
+	* mdebugread.c (parse_partial_symbols): Don't construct a partial
+	symbol table for a file that already has one.
+
+Sat Sep 13 08:32:13 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol, handle_psymbol_enumerators):  Handle
+	yet another variant of enumerator debugging info, used by DU 4.0
+	native cc.
+
+Tue Sep  9 20:47:23 1997  Felix Lee  <flee@cygnus.com>
+
+	* config/i386/windows.mh (XDEPFILES): reduce to libwingdb.a.
+  	otherwise link command line is too long.
+
+Tue Sep  9 17:41:41 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* symtab.c, dbxread.c, stabsread.c: Fix up ANSI-C isms.  Fix
+	some formatting problems.
+
+Mon Sep  8 16:45:51 1997  Stu Grossman  <grossman@cygnus.com>
+
+	* ser-e7kpc.c:  Don't include w32sut.h.  We no longer use the UT
+	mechanism.  Remove prototypes for dos_async_* functions.  They don't
+	exist anymore.
+
+Mon Sep  8 12:48:50 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* top.c (quit_confirm, quit_force): New functions, broken out of
+	quit_command.
+	(quit_command): Just call quit_confirm and quit_force.
+	* top.h (quit_confirm, quit_force): Declare.
+
+Sun Sep  7 17:26:30 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* dbxread.c, buildsym.c, symtab.c, stabsread.c: Add support for 
+	reading stabs extensions for live range information.
+	* stabsread.h, partial-stab.h: Add prototypes for new functions.
+	* symtab.h: Add structure for storing live range information.
+
+Wed Sep  3 16:39:39 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* top.c (set_arch): New function, update target_architecture.
+	
+	* defs.h, top.c (set_architecture_from_arch_mach): Replace
+ 	set_architecture, takes the arch and machine as arguments.
+
+	* sh3-rom.c (sh3e_open): Update.
+	(sh3_open): Ditto.
+
+Tue Sep  2 12:00:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-e7000.c (e7000_fetch_registers): Fix typo, stray paren.
+	(e7000_wait): Ditto.
+
+Mon Sep  1 11:21:03 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* top.c (init_main): Add ``set processor'' as an alias for ``set
+ 	architecture''.
+
+Sat Aug 30 13:44:48 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sparc/sparclite.mt: Removed simulator references (erc32
+ 	has been disabled).
+
+Thu Aug 28 10:20:04 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-e7000.c (e7000_fetch_registers): Check
+ 	target_architecture instead of sh_processor_type.
+	(e7000_wait): Ditto.
+
+	* config/sh/tm-sh.h (sh_set_processor_type): Delete prototype.
+
+	* sh3-rom.c (sh3_open): Call set_architecture not
+ 	sh_set_processor_type.
+	(sh3e_open): Ditto.
+
+	* sh-tdep.c (sh_show_processor_type_command): Delete.
+	(sh_set_processor_type_command): Delete.
+	(sh_target_architecture_hook): Rename from sh_set_processor_type,
+ 	use AP to determine architecture.
+	(sh_show_regs): Use bfd_mach_sh* types.
+
+	* remote-sim.c (gdbsim_open): Pass --arch=XXX to simulator when
+ 	architecture was specified explicitly.
+
+	* defs.h (target_architecture, target_architecture_auto,
+ 	set_architecture, set_architecture_from_file): Declare.
+	(target_architecture_hook): Allow targets to be notified of set
+ 	arch commands.
+	
+	* top.c (init_main): Add set/show/info architecture commands.
+  	(set_architecture, show_architecture, info_architecture): New
+ 	functions, parse same.
+	(set_architecture_from_file): New function, determine arch from
+ 	BFD.
+	
+Tue Aug 26 17:13:43 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Only pass endianness to sim_open
+ 	when set explicitly.  Prepend endianness arg so that it can be
+ 	overridden.
+
+	* defs.h, top.c (target_byte_order_auto): Make global when
+ 	byteorder is selectable.
+
+Tue Aug 26 15:19:56 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_create_inferior): Pass exec_bfd into
+ 	sim_create_inferior.
+	(gdbsim_create_inferior): Pass -1 to proceed, sim_create_inferior
+ 	has already set the PC.
+	(gdbsim_create_inferior): Allow exec_file to be NULL, make "No
+ 	exec file" a warning.  Ditto for "No program loaded".
+
+Mon Aug 25 17:08:01 1997  Geoffrey Noer  <noer@cygnus.com>
+
+        * ocd.c: revert Sun change -- enable log file handling
+
+Mon Aug 25 12:21:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Pass exec_bfd to sim_open call.
+
+Sun Aug 24 21:16:59 1997  Geoffrey Noer  <noer@cygnus.com>
+
+        * ocd.c: comment out sections that create and flush wigglers.log
+        log file when using the wiggler.
+
+Thu Aug 21 16:18:08 1997  Geoffrey Noer  <noer@cygnus.com>
+
+        * config/powerpc/ppc-eabi.mt:
+        * config/powerpc/ppc-sim.mt:
+        * config/powerpc/ppcle-eabi.mt:
+        * config/powerpc/ppcle-sim.mt: ser-ocd.c needs to be before
+        other ocd-related files in TDEPFILES
+
+Thu Aug 21 14:56:04 1997  Geoffrey Noer  <noer@cygnus.com>
+
+        * ppc-bdm.c (bdm_ppc_wait): stop printfing ecr, der
+        * ocd.c: initialize remote_timeout
+        (ocd_wait): while looping, call ocd_do_command with OCD_AYT 
+        (ocd_get_packet): remove find_packet goto.  If there isn't
+        an 0x55 at the start, something is quite wrong so error out
+        instead of advancing in the packet and trying again.  If checksum
+        is invalid, print error message instead of trying again.
+        * ser-ocd.c (ocd_readchar): error if we attempt to read past
+        the end of the from_wiggler_buffer.
+
+
+Wed Aug 20 14:08:39 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dink32-rom.c: Don't use "mf" command to fill, is too picky
+	about alignment.
+
+
+Tue Aug 19 08:41:36 1997  Fred Fish  <fnf@cygnus.com>
+
+	* objfiles.c (objfile_relocate): Add call to breakpoint_re_set
+	after relocations are complete.
+	* remote-vx.c (vx_add_symbols): Remove call to breakpoint_re_set,
+	this is now done in objfile_relocate.
+
+Mon Aug 18 17:29:54 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* win32-nat.c (handle_exception): Return a value indicating
+ 	whether the exception was handled.  Don't handle random exceptions
+	the first time around, so that structured exception handling
+	works.
+	(child_wait): Check the return value of handle_exception.  Set the
+	continue_status argument to ContinueDebugEvent accordingly.
+
+Mon Aug 18 11:14:15 1997  Nick Clifton  <nickc@cygnus.com>
+
+	* configure.tgt: Add support for v850ea target.
+
+Sun Aug 17 20:31:57 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* m32r-stub.c: fix typo
+
+Sun Aug 17 17:33:34 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-sds.c: Remove unused remnants of remote.c.
+	(tob64): Return the result length.
+	(sds_interrupt): Send a stop message.
+	(sds_wait): Add debug output for signal interpretation, flag
+	that signal was due to a trap.
+	(sds_fetch_registers): Fill the registers array correctly for
+ 	PowerPC.
+	(sds_store_registers): Get the right values from registers array.
+	(putmessage): Tweak length handling so checksum comes out right.
+	(sds_insert_breakpoint, sds_remove_breakpoint): Do correctly.
+
+Fri Aug 15 20:53:13 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (init.c): Don't use xargs.
+
+Fri Aug 15 13:59:37 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Add the symbols for any
+	newly loaded objects upon a TARGET_WAITKIND_LOADED event.
+
+	Rewrite code which determines the TOC address for calling functions
+	in the inferior under AIX.
+	* rs6000-nat.c (find_toc_address):  New function to determine
+	the required TOC address from a function address.
+	(_initialize_core_rs6000):  Set up find_toc_address_hook to point
+	to find_toc_address.
+	(xcoff_relocate_symtab, xcoff_relocate_core):  Remove
+	add_text_to_loadinfo calls.
+	(exec_one_dummy_insn):  Change pid and status to int to get rid of
+	compiler warnings.
+	(xcoff_relocate_symtab):  Cast ldi to `int *' when passing it to
+	ptrace to get rid of compiler warnings.
+	* rs6000-tdep.c:  Add definition for find_toc_address_hook.
+	(rs6000_fix_call_dummy):  If find_toc_address_hook is non zero,
+	patch TOC address load code in the call dummy with the value
+	returned from find_toc_address_hook.
+	(struct loadinfo, loadinfo, loadinfolen,
+	loadinfotextindex, xcoff_init_loadinfo, free_loadinfo,
+	xcoff_add_toc_to_loadinfo, add_text_to_loadinfo, find_toc_address):
+	Remove.
+	(_initialize_rs6000_tdep):  Remove initialization of
+	coff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
+	* xcoffread.c (coff_add_toc_to_loadinfo_hook,
+	xcoff_init_loadinfo_hook):  Remove.
+	(struct coff_symfile_info):  Add toc_offset field.
+	(scan_xcoff_symtab):  Record toc_offset value in toc_offset field
+	instead of calling xcoff_add_toc_to_loadinfo_hook.
+	(get_toc_offset):  New function to return the value of the
+	toc_offset field for an object file.
+	(xcoff_initial_scan):  Remove call of xcoff_init_loadinfo_hook.
+	* xcoffsolib.h (add_text_to_loadinfo):  Remove declaration.
+	* config/rs6000/tm-rs6000.h:  Add declarations for
+	find_toc_address_hook and get_toc_offset.
+
+Wed Aug 13 19:31:28 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-sds.c: New file, interface to SDS-compatible monitors.
+	* Makefile.in (remote-sds.o): Add build rule.
+	* config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
+ 	(TDEPFILES): Add remote-sds.o.
+
+Tue Aug 12 14:37:18 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* ocd.c (ocd_wait): loop until we're in BDM mode instead of
+	assuming control has returned to GDB.
+
+Mon Aug 11 19:16:04 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dink32-rom.c: New file, support for DINK32 monitor.
+	* Makefile.in (dink32-rom.o): Add build rule.
+	* config/powerpc/ppc-eabi.mt, config/powerpc/ppc-sim.mt
+ 	(TDEPFILES): Add dink32-rom.o.
+	* monitor.h (MO_32_REGS_PAIRED, MO_SETREG_INTERACTIVE,
+ 	MO_SETMEM_INTERACTIVE, MO_GETMEM_16_BOUNDARY,
+ 	MO_CLR_BREAK_1_BASED): New monitor interface flags.
+	* monitor.c: Use them.
+	(monitor_store_register): Use setreg.term if defined.
+	(monitor_insert_breakpoint, monitor_remove_breakpoint): Notice
+	if set_break and clr_break fields are empty.
+
+Mon Aug 11 16:22:36 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Macro
+	BDM_BREAKPOINT already has braces around it, remove erroneous ones.
+	* ser-ocd.c (ocd_write): Conditionalize on _WIN32 instead of
+	__CYGWIN32__.
+	* config/powerpc/tm-ppc-eabi.h: Remove BDM_NUM_REGS, BDM_REGMAP
+	* ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
+	fill in doc fields of bdm_ppc_ops.
+	(bdm_ppc_fetch_registers): Don't ask for invalid registers such
+	as the MQ or floating point regs not present on ppc 8xx boards.
+	(bdm_ppc_store_registers): Don't write those same invalid registers.
+	* config/i386/cygwin32.mh: Stop including ocd.o ser-ocd.o.
+	* config/powerpc/ppc-eabi.mt:
+	* config/powerpc/ppcle-eabi.mt:
+	* config/powerpc/ppc-sim.mt:
+	* config/powerpc/ppcle-sim.mt: Include ser-ocd.o.
+
+Mon Aug 11 16:08:52 1997  Fred Fish  <fnf@cygnus.com>
+
+	* frame.h (enum lval_type): Conditionalize on __GNUC__
+ 	instead of __STDC__.
+
+Sun Aug 10 19:08:26 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* utils.c (error): Fix return type for !ANSI_PROTOTYPES.
+
+Sun Aug 10 16:49:09 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* ocd.c: move ocd_write_bytes proto to ocd.h since it is used
+	by ppc-bdm.c, use OCD_LOG_FILE to help debugging, define
+	BDM_BREAKPOINT if not defined in tm.h
+	(ocd_error): add new error cases
+	(ocd_start_remote): send the OCD_INIT command before
+	OCD_AYT and OCD_GET_VERSION calls, 80 was correct speed after all
+	(ocd_write_bytes): no longer static
+	(ocd_insert_breakpoint): no longer static
+	(ocd_remove_breakpoint): new
+	* ocd.h: add protos for ocd_write_bytes, ocd_insert_breakpoint,
+	and ocd_remove_breakpoint
+	* ppc-bdm.c: change bdm_ppc_ops so we call ocd_insert_breakpoint
+	and ocd_remove_breakpoint instead of memory_insert_breakpoint
+	and memory_remove_breakpoint.
+ 	(bdm_ppc_open): after calling ocd_open, modify DER
+	register so interrupts will drop us into debugging mode, finally
+	disable the watchdog timer on the board so we don't leave BDM
+	mode unexpectedly.
+
+Sat Aug  9 01:50:14 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* values.c (value_primitive_field):  Account for offset when
+	extracting the value of a bitfield.
+	From Paul Hilfinger <hilfingr@CS.Berkeley.EDU>.
+
+Fri Aug  8 21:35:44 1997  Mark Alexander  <marka@cygnus.com>
+
+	* gdbserver/utils.c (error): Change prototype to match defs.h.
+	* gdbserver/low-sim.c: Change simulator calls to use new interface.
+	* remote.c (remote_write_bytes): Include '$' at start of packet
+	and checksum at end of packet in overhead calculation.
+
+Fri Aug  8 15:59:24 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ser-ocd.c: If _WIN32, include <windows.h>.
+	(dll_do_command): New static variable if _WIN32.
+	(ocd_open): Set dll_do_command if _WIN32.
+	(ocd_write): Use dll_do_command rather than do_command.
+	* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
+	(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
+	($(BDM_LIBNAME)): Remove target.
+	* wigglers.def: Remove.
+
+	* config/i386/cygwin32.mh ($(BDM_LIBNAME)): Rename target from
+	libwigglers.def.
+	(libwigglers.a): Remove target.
+
+Fri Aug  8 13:11:01 1997  Mike Meissner  <meissner@cygnus.com>
+
+	* config/powerpc/ppc{,le}-{eabi,sim}.mt (TDEPFILES): Make sure
+	ppc-bdm.o and ocd.o are used for all powerpc-eabi targets.
+
+Thu Aug  7 19:40:52 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	Changes to OCD support to support wiggler box as well as
+	target boxes:
+	* ocd.c: change speed in init command to 0 from 80,
+	add (temporary) logging commands to help debugging,
+	(ocd_open): if "target ocd wiggler lpt" then use special
+	ser-ocd.c serial interface which communicates with Wigglers.dll,
+	otherwise ("target ocd <foo>") do as we did before
+	(ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
+	switch of known commands of len 0
+	* ocd.h: add OCD_LOG_FILE
+	* serial.c (serial_open): do serial_interface_lookup on ocd
+	in the case of ocd
+	* ser-ocd.c: add buffer to contain responses from sending a
+	command to the Wigglers.dll.
+	(ocd_readchar): return curr char from buffer and increment ptr
+	(ocd_write): send buffer to Wigglers.dll, storing response in
+	return buffer and initializing curr location ptr to start of
+	buffer.
+
+Thu Aug  7 13:39:31 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* ocd.h: add OCD_SET_CONNECTION
+	* ocd.c: rename "do_command" to "ocd_do_command" 
+
+Thu Aug  7 13:09:17 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	Nomenclature change.  BDM is a specific type of OCD
+	(On Chip Debugging).  Wiggler is the parallel port box controlled
+	by Wigglers.dll.  The faster target box from Macraigor Systems
+	is not a wiggler.  
+	* ocd.c:
+	* ocd.h:
+	* ppc-bdm.c:
+	* ser-ocd.c:
+	Replace all instances of "wiggler_" with "ocd_" and change most other
+	instances of "wiggler" to "ocd" or "ocd device" depending on context.
+	* config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES
+	until OCD with that target is supported again.
+
+Wed Aug  6 16:15:31 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
+	sub makes, change clean rule to also remove *.a to remove
+	libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
+	remove remote-wiggler.o
+	* configure.in: add DLLTOOL support
+	* configure: regenerate
+	* wigglers.def: new file for imports for wigglers.dll
+	* ser-ocd.c: new file which is layer between ocd.c and either the
+	wigglers.dll or the target box, only stub so far
+	* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
+	* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
+	* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
+	to XDEPFILES, add rules to build libwigglers.a
+
+	checking in changes of Stu Grossman  <grossman@cygnus.com>:
+	* remote-wiggler.c: delete
+	* ocd.c: new, was remote-wiggler.c
+	always include sys/types.h, include ocd.h, move WIGGLER
+	commands and many wiggler prototypes to ocd.h, make wiggler_desc
+	static, stop making local wiggler functions static,
+	define write_mem_command for wiggler_write_bytes
+	(wiggler_start_remote): stop hardcoding the target type,
+	instead set and use a target_type variable.
+	(wiggler_open): add new target_type and ops args
+	(wiggler_wait): now no longer takes pid and target_status as args,
+	stop trying to set target_status struct, remove BGND insn
+	checks
+	(read_bdm_registers): renamed to wiggler_read_bdm_registers	
+	(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
+	remove pktlen check, set reglen instead of numregs 
+	(dump_all_bdm_regs): delete
+	(wiggler_fetch_registers): delete
+	(wiggler_prepare_to_store): now just an empty function
+	(wiggler_store_registers): delete
+	(wiggler_read_bdm_register): new
+	(wiggler_write_bdm_registers): new
+	(wiggler_write_bdm_register): new
+	(wiggler_write_bytes): use write_mem_command variable instead of
+	WIGGLER_WRITE_MEM
+	(get_packet): renamed to wiggler_get_packet, change refs throughout
+	(put_packet): renamed to wiggler_put_packet, change refs throughout
+	(wiggler_get_packet): add break to default case of switch,
+	change length of WIGGLER_GET_VERSION len to 10 from 4 to match
+	specs
+	(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
+	(flash_xfer_memory): delete
+	(noop_store_registers): new placeholder replacement for
+	target_store_registers() which prevents generic_load from trying to
+	set up the PC.
+	(bdm_update_flash_command): add store_registers_tmp variable,
+	make handling of wiggler_ops more generic -- define wiggler_ops
+	in a target-specific file instead (such as ppc-bdm.c in the case
+	of the ppc), use current_target to deal with registers again
+	making this file less target-specific.
+	(bdm_read_register_command): new
+	(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
+	comment out add_cmd ("read-register", ...)
+	* ocd.h: new, contains common wiggler prototypes, command definitions
+	* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
+	structure for ppc bdm
+	(bdm_ppc_open): new
+	(bdm_ppc_wait): new
+	(bdm_ppc_fetch_registers): new
+	(bdm_ppc_store_registers_: new
+	(_initialize_bdm_ppc): new
+	* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
+
+Wed Aug  6 00:24:08 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* hpread.c (hpread_read_struct_type): Use accessor macros rather
+	than directly mucking around with data structures.
+
+Tue Aug  5 13:37:14 1997  Per Bothner  <bothner@cygnus.com>
+
+	* gdbtypes.h:  Re-interpret struct field.  Suppport address of static.
+	Add a bunch of macros.
+	* coffread.c, dwarf2read.c, dwarfread.c, mdebugread.c, stabsread.c:
+	Update to use new macros.
+	* coffread.c, hpread.c, stabsread.c:  Remove bugus TYPE_FIELD_VALUE.
+	* value.h, values.c (value_static_field):  New function.
+	* cp-valprint.c, valops.c:  Modify to use value_static_field.
+
+	* jv-lang.c (get_java_utf8_name):  Re-write so it works with
+	implied (missing) data field, as defined by cc1java.
+	(java_link_class_type):  Type length and field offset (in interior)
+	now includes object header.  Get static fields working.
+	* jv-lang.h (JAVA_OBJECT_SIZE):  Update for change in Kaffe.
+	* jv-typeprint.c (java_type_print_derivation_info,
+	java_type_print_base):  New functions, for better Java output.
+	* jv-valprint.c:  Start to support Java-specific output.
+
+Sun Aug  3 08:18:09 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-valprint.c (c_val_print):  Use extract_address to retrieve
+	the address of the virtual function.
+	From Peter Bloecher (Peter.Bloecher@eedn.ericsson.se).
+
+	* eval.c (evaluate_subexp_standard), valarith.c (value_x_unop):
+	Handle C++ operator *.
+
+Fri Aug  1 15:21:44 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: Check for cygwin32 environment.  Define and
+	substitute WIN32LIBS and WIN32LDAPP.  Always set configdir to
+	unix; setting it to win was for an old Tcl/Tk configuration
+	scheme.
+	* Makefile.in (TK_CFLAGS): Add @TK_BUILD_INCLUDES@.
+	(WIN32LDAPP, WIN32LIBS): Define.
+	(CLIBS): Add $(WIN32LIBS).
+	(gdb): Use $(WIN32LDAPP).
+	* configure: Rebuild.
+
+Thu Jul 31 15:40:19 1997  Per Bothner  <bothner@cygnus.com>
+
+	* symtab.h (SYMBOL_INIT_LANGUAGE_SPECIFIC, SYMBOL_INIT_DEMANGLED_NAME,
+	SYMBOL_DEMANGLED_NAME):  Add demangling support for Java.
+	* utils.c (fprintf_symbol_filtered):  Handle language_java.
+
+	* symtab.c (decode_line_1):  Handle Java-style package.class.method.
+
+Wed Jul 30 14:04:18 1997  Per Bothner  <bothner@cygnus.com>
+
+	* java-*:  Renamed to jv-*, to make fit within 14 characters.
+	* jv-lang.h (java_type_print):  Added declaration.
+	* jv-typeprint.c:  New file.  Provides java_print_type.
+	* jv-lang.c (java_link_class_type):  New function.
+	(java_language_defn):  Replace c_print_type by java_print_type.
+	* Makefile.in:  Update accordingly.
+
+Tue Jul 29 10:12:44 1997  Felix Lee  <flee@cygnus.com>
+
+	* Makefile.in (init.c): except some mswin files do need to be
+ 	scanned.  oh well.
+
+Mon Jul 28 14:04:39 1997  Felix Lee  <flee@cygnus.com>
+
+	* Makefile.in (init.c): don't try to scan mswin for _initialize
+ 	funcs.  (generates misleading error message because files have
+ 	.cpp suffix, not .c suffix)
+
+Mon Jul 28 13:27:21 1997  Felix Lee  <flee@cygnus.com>
+
+	* ser-e7kpc.c: <w32sut.h> -> "mswin/w32sut.h"
+
+Mon Jul 28 02:54:31 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* xcoffread.c (coff_getfilename):  Do not strip directory component
+	of filename.
+
+Fri Jul 25 15:16:15 1997  Felix Lee  <flee@cygnus.com>
+
+	* mon960-rom.c: removed unused #includes; no ioctl.h in Windows.
+	* nindy-share/ttyflush.c: find sleep() for _MSC_VER.
+	* remote-array.c: #include <ctype.h> for isascii().
+	* utils.c (notice_quit,pollquit): cleanup.  _WIN32 -> _MSC_VER.
+
+Fri Jul 25 16:48:18 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* top.c (execute_command): Force cleanup of alloca areas.
+	* findvar.c (registers_changed): Likewise.
+
+Fri Jul 25 15:37:15 1997  Stu Grossman  <grossman@cygnus.com>
+
+	* v850ice.c:  Include <windows.h>.  Support new v850 DLL interface.
+	* Add defs for target status.
+
+Tue Jul 22 12:11:48 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* config/mips/tm-mips64.h: longs, long longs, and pointers
+	are all 64 bits on EABI mips targets.
+
+Thu Jul 17 11:38:46 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* partial-stab.h (case N_BINCL): detect missing partial symtab.
+	* dbxread.c: Add a complaint for N_BINCL without a corresponding
+	partial symtab.  Remove earlier change of 5/27/97.
+
+Wed Jul 16 10:38:03 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* sol-thread.c (sol_thread_[store, fetch]_registers): if 
+	inferior_pid is an LWP rather than a Solaris thread, let
+	procfs handle the request.
+	(rw_common, sol_thread_xfer_memory): procfs_xfer_memory will
+	only work if inferior_pid points to an LWP (rather than a 
+	Solaris thread).  Use procfs_first_available to find a good LWP.
+	(info_solthreads): added a maintenance command to list all 
+	known Solaris threads and their attributes.
+	* mips-tdep.c (mips_do_registers_info): Completely changed the
+	output format to be neat and columnar.  Added the helper funcs
+	do_fp_register_row and do_gp_register_row.  Also small mods to
+	mips_print_register, which is still used to print a single reg.
+
+Mon Jul 14 18:02:53 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* procfs.c (wait_fd): Handle an fd that has "hung up" or 
+	otherwise terminated (Solaris threads).
+
+Thu Jul 10 00:02:41 1997  Martin M. Hunt  <hunt@cygnus.com>
+
+	* defs.h (init_ui_hook): Change prototype to accept one arg.
+	* main.c (gdb_init): Change prototype to accept one arg.
+	* top.c (gdb_init): Accepts one argument which it uses to
+	call (*init_ui_hook).
+
+Fri Jul  4 14:49:33 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* source.c (OPEN_MODE, FDOPEN_MODE): Define; value depends upon
+	whether CRLF_SOURCE_FILES is defined.
+	(open_source_file): Use OPEN_MODE with open and openp.
+	(print_source_lines): Use FDOPEN_MODE with fdopen.  If
+	CRLF_SOURCE_FILES is defined, ignore \r characters.
+	(forward_search_command): Use FDOPEN_MODE with fdopen.
+	(reverse_search_command): Likewise.
+	* config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
+	(LSEEK_NOT_LINEAR): Don't define.
+
+Thu Jul  3 17:41:46 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* mips-tdep.c (mips_extract_return_value): align 4-byte float
+	return values within the 8-byte FP register.
+
+Thu Jul  3 13:48:11 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* mips-tdep.c (mips_push_arguments): don't left-adjust 32-bit
+	integers in 64-bit register parameters before function calls.
+
+Mon Jun 30 17:54:51 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* mips-tdep.c (mips_push_arguments): special-case handling for
+	odd-sized struct parameters passed in registers / on stack.
+
+Mon Jun 30 15:30:38 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* mips-tdep.c (mips_push_arguments): tweak alignment of small
+	structs passed in registers for little-endian non-EABI mode.
+
+Mon Jun 30 13:05:39 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* breakpoint.c (frame_in_dummy): use generic dummy if available.
+	  (check_duplicates, clear_command): compare sections only if
+	  doing overlay debugging.
+
+Fri Jun 27 23:03:53 1997  Fred Fish  <fnf@ninemoons.com>
+
+	* buildsym.h (struct subfile): Add debugformat member.
+	(record_debugformat): Declare global function.
+	* buildsym.c (start_subfile): Initialize debugformat member
+	to NULL.
+	(record_debugformat): New function to record the format.
+	(end_symtab): Copy format into symtab debugformat member.
+	(end_symtab): Free subfile debugformat member.
+	* symmisc.c (free_symtab): Free debugformat when freeing
+	symtab.
+	* symfile.c (allocate_symtab): Initialize the new debugformat
+	member for new symtabs.
+	* symtab.h (struct symtab): Add debugformat member.
+	* source.c (source_info): Print the debug format.
+
+	* os9kread.c (os9k_process_one_symbol): Call record_debugformat
+	with "OS9".
+	* hpread.c (hpread_expand_symtab): Call record_debugformat
+	with "HP".
+	(hpread_process_one_debug_symbol): Ditto.
+	* dbxread.c (process_one_symbol): Call record_debugformat
+	with "stabs".
+	* coffread.c (coff_start_symtab): Call record_debugformat
+	with "COFF".
+	* xcoffread.c (read_xcoff_symtab): Call record_debugformat
+	with "XCOFF".
+	* dwarfread.c (read_file_scope): Call record_debugformat
+	with "DWARF 1".
+	* dwarf2read.c (read_file_scope): Call record_debugformat
+	with "DWARF 2".
+	* dstread.c (dst_end_symtab): Set debugformat to be
+	"Apollo DST".
+	* mdebugread.c (new_symtab): Set debugformat to be "ECOFF".
+
+Fri Jun 27 21:05:45 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* mips-tdep.c (mips_push_arguments): handle alignment of
+	integer and struct args on stack for mips64 big-endian.
+
+Fri Jun 27 19:19:12 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* config/mips/tm-mips.h (USE_STRUCT_CONVENTION): MIPS_EABI returns
+	structs in a register wherever possible.
+	* mips-tdep.c (mips_extract_return_value): handle structs.
+	(mips_store_return_value): handle values smaller than MIPS_REGSIZE
+	(including structs, if gdb ever allows it).
+
+Fri Jun 20 17:58:34 1997  Fred Fish  <fnf@cygnus.com>
+
+	* sh-tdep.c (sh_skip_prologue): Also recognize fmov insns.
+	(sh_frame_find_saved_regs): Recognize fmov insns and adjust
+	stack push count accordingly.
+	* sh-tdep.c (IS_FMOV, FPSCR_SZ): New defines
+
+Thu Jun 19 08:18:48 1997  Mark Alexander  <marka@cygnus.com>
+
+	* utils.c (floatformat_from_doublest): Improve test for infinity.
+
+Wed Jun 18 13:47:52 1997  Fred Fish  <fnf@cygnus.com>
+
+	* dwarfread.c (isreg, optimized_out, offreg, basereg): Move
+	global variables into the struct dieinfo structure.
+	(locval): Pass pointer to a dieinfo struct rather than a
+	pointer to the raw location information.  Change prototype.
+	Set isreg, optimized_out, offreg and basereg as appropriate.
+	(struct_type): Call locval with dieinfo struct pointer.
+	(new_symbol): Ditto.
+	(new_symbol): Call locval and save location before testing
+	the values of the new dieinfo struct flags, set by locval.
+
+Tue Jun 17 13:30:12 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* procfs.c (proc_set_exec_trap, procfs_init_inferior, procfs_wait,
+	unconditionally_kill_inferior):  Undo Oct 26 1996 and Apr 26 1997
+	changes to trace PRFS_STOPTERM and handle PR_DEAD.
+	These changes tried to work around a problem with an early DU 4.0
+	release, but they trigger subtle timing dependent kernel bugs
+	in older OSF/1 releases.
+
+Tue Jun 17 06:52:47 1997  Fred Fish  <fnf@cygnus.com>
+
+	* dwarfread.c (new_symbol): Use SYMBOL_VALUE_ADDRESS, instead of
+	SYMBOL_VALUE, to set the value of LOC_STATIC symbols.
+
+Mon Jun 16 18:38:28 1997  Mark Alexander  <marka@cygnus.com>
+
+	* infrun.c (wait_for_inferior): Mark registers as invalid when
+	stepping over an instruction that triggered a watchpoint.
+	* remote-mips.c: Numerous changes to support hardware breakpoints
+	and watchpoints on LSI MiniRISC and TinyRISC boards.
+	* mips-tdep.c: Move MIPS16-related macros to config/mips/tm-mips.h.
+	(mips_breakpoint_from_pc): Account for different breakpoint
+	instructions used by PMON and IDT monitor.
+	* config/mips/tm-embed.h: Enable hardware breakpoints on embedded
+	MIPS targets.
+	* config/mips/tm-mips.h: Define breakpoint instructions for
+	PMON and IDT monitor.  Move MIPS16-related macros here from
+	mips-tdep.c.
+	
+Fri Jun 13 13:44:47 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* config/mips/tm-tx39[l].h, tx39[l].mt: change r3900 target to tx39.
+
+Fri Jun 13 14:14:10 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): Fix some comments.
+	Add missing return statements after finding an "add imm{16,32},sp"
+	instruction.
+	(mn10300_frame_chain): Add in size of our register save area to find
+	our caller's frame if our caller does not have a frame pointer.
+
+Fri Jun 13 12:55:49 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* symfile.c (generic_load): Check return code of target_write_memory.
+
+Fri Jun 13 10:28:09 1997  Fred Fish  <fnf@cygnus.com>
+
+	* config/i386/nm-linux.h: Enable prototypes that were #ifdef out.
+	* config/tm-sysv4.h (in_plt_section): Add prototype.
+
+	* maint.c (maintenance_translate_address): Avoid assignment
+	inside if, per GNU coding standards.
+	* symfile.c (simple_read_overlay_table): Avoid assignments inside if, 
+	per GNU coding standards.
+
+	* monitor.c (parse_register_dump): Is really a void function.
+	Add prototype.
+	(monitor_read_memory): Remove unused variable "name".
+	(monitor_read_memory): Remove unused variable "regbuf".
+	(monitor_open): Remove unused variable "i".
+	(get_hex_word): Apparently unused, #if away for now.
+	(from_hex): Ditto.
+
+	* i386v4-nat.c (supply_fpregset): Remove unused variable "regi".
+	(fill_fpregset): Remove unused variables "regi", "to", "from" and
+	"registers".
+
+	* remote-e7000.c (ctype.h): Include.
+	(e7000_insert_breakpoint): #if away unused arg used by unused expr.
+	* frame.h (generic_get_saved_register): Add prototype.
+	(enum lval_type): Add partial forward decl.
+	* dsrec.c (make_srec): Remove unused variable "type_code".
+	* remote-sim.c (gdbsim_wait): Handle sim_running and sim_polling
+	cases by just ignoring them.
+	(command.h): Include.
+
+	* java-exp.y (parse_number): Remove unused variable "unsigned_p".
+	* java-lang.c (gdbcore.h): Include for prototypes.
+	(type_from_class): Remove unused variable "ftype".
+	(type_from_class): Remove unused variable "name_length".
+	(evaluate_subexp_java): Add default case to handle remaining
+	enumerations.
+	* java-valprint.c (c-lang.h): Include for prototypes.
+
+	* symfile.c (simple_read_overlay_region_table): #if away
+	unused function.
+	(simple_free_overlay_region_table): Ditto.
+	(overlay_is_mapped): Add default case to switch.
+	(simple_read_overlay_region_table): Ditto.
+	(simple_read_overlay_region_table): Add prototype.
+
+	* symtab.c (fixup_symbol_section): Remove unused msym variable.
+	(fixup_psymbol_section): Ditto.
+	(find_pc_sect_symtab): Make distance a CORE_ADDR.
+
+	* utils.c: Add comment about t_addr being either unsigned long or
+	unsigned long long.
+	(paddr): Change formats to match actual types args are cast to.
+	(preg): Ditto.
+	(paddr_nz): Ditto.
+	(preg_nz): Ditto.
+
+	* defs.h (perror_with_name): Is a NORETURN function.
+	* utils.c (perror_with_name): Is a NORETURN function.
+	(error): Is NORETURN independently of ANSI_PROTOTYPES.
+
+	* symtab.c (fixup_symbol_section): Remove prototype.
+	* symtab.h: (fixup_symbol_section): Add prototype.
+	* m32r-rom.c (report_transfer_performance): Add prototype.
+	* sparclet-rom.c: Ditto.
+	* dsrec.c: Ditto.
+
+	* c-exp.y (parse_number): Cast args to float* or double* as
+	appropriate for conversion format.
+	* java-exp.y (parse_number): Ditto.
+
+	* Makefile.in (c-exp.tab.c): Remove #line lines that refer
+	to nonexistant y.tab.c file.
+	(java-exp.tab.c): Ditto.
+	(f-exp.tab.c): Ditto.
+	(m2-exp.tab.c): Ditto.
+
+	* sh-tdep.c (symfile.h): Include.
+	(gdb_string.h): Include.
+	(sh_fix_call_dummy): Ifdef away, currently unused.
+	* config/sh/tm-sh.h (pop_frame): Add prototype.
+	* config/sh/tm-sh.h (sh_set_processor_type): Add prototype.
+
+Sat Jun  7 02:34:19 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* eval.c (evaluate_subexp_for_sizeof):  Handle dereferencing
+	of non-pointer values.
+
+	* symtab.c (gdb_mangle_name):  Improve mangling of nested types,
+	their physical names already include the class name.
+
+	* valops.c (value_cast):  Handle upcast of a class pointer.
+
+	From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
+	* corelow.c (get_core_registers):  Make secname big enough.
+
+Fri Jun  6 14:43:23 1997  Keith Seitz  <keiths@pizza.cygnus.com>
+
+	* config/sh/tm-sh.h: add define for FPSCR_REGNUM
+	* sh-tdep.c (sh_show_regs): print out all registers for
+	the current processor
+	
+Fri Jun  6 13:01:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_kill): Remove call to depreciated function
+ 	sim_kill.
+
+Thu Jun  5 11:39:03 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	Fixes for recent correction to PE format:
+	* coffread.c (pe_file): New static variable.
+	(struct find_targ_sec_arg): Change resultp from pointer to int to
+	pointer to pointer to asection.
+	(find_targ_sec): Just store the section in args->resultp, not the
+	section offset value.
+	(cs_to_section): Compute the section offset value from the
+	section.
+	(cs_section_address): New static function.
+	(coff_symfile_read): Set pe_file.
+	(read_one_sym): When reading a PE file, adjust the symbol value to
+	include the section address if the symbol has an appropriate
+	storage class.
+
+Tue Jun  3 16:24:46 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* configure.tgt: add mipsr3900-elf target
+	* config/mips/r3900.mt r3900l.mt tm-r3900.h tm-r3900l.h: ditto
+
+Tue May 27 10:34:11 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* dbxread.c: Check malloc's return for null, prevent segv.
+
+Fri May 23 14:45:02 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* infcmd.c (jump_command): Don't try to dereference sfn if it's
+ 	NULL.
+
+Fri May 23 13:51:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* top.c (init_cmd_lists): Always initialize endianlist.
+	(init_main): Always define endian commands.
+	(set_endian_big): Issue warning if endian not selectable.
+	(set_endian_little): Ditto.
+	(set_endian_auto): Ditto.
+
+Thu May 22 11:53:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (simulator_command): Restrict access to the
+ 	simulator to periods when the simulator is open.
+
+Wed May 21 16:03:25 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* procfs.c (init_procinfo): new function, abstracts some code
+	shared by create_procinfo and do_attach; 
+	(procfs_set_inferior_syscall_traps): new function, abstracts
+	some code needed by procfs_init_inferior, do_attach, and 
+	procfs_lwp_creation_handler; (procfs_first_available): new
+	function, find any LWP that's runnable; (procfs_thread_alive):
+	replace stub function with real implementation; 
+	(procfs_lwp_creation_handler): fix bug starting new child 
+	threads; (info_proc): bug fixes and enhancements for the 
+	"INFO PROCESSES" command; (close_procinfo_file): call new
+	function "delete_thread" to cleanup GDB's thread database;
+	(proc_init_failed): add new argument "kill", to control whether
+	process is killed (so this function can be shared by 
+	create_procinfo and do_attach); (procfs_exit_handler): handle
+	exit from an attached process, and cleanup procinfo handles
+	when the process exits; (procfs_resume, procfs_wait): cleanup
+	after a thread when it exits; (do_attach, do_detach): handle
+	attached processes with multiple threads; plus some general 
+	improvements in the diagnostic output.
+	* sol-thread.c (sol_thread_alive): replace stub with real
+	implementation; (thread_to_lwp, lwp_to_thread): enhance to 
+	handle threads that may have exited; (sol_thread_attach): add
+	startup setup stuff; (sol_thread_detach): add unpush_target
+	call; (sol_thread_mourn_inferior): add unpush_target call;
+	(sol_thread_wait, sol_thread_resume): enhance to deal with
+	thread exit cleanly; (sol_thread_new_objfile, 
+	sol_thread_pid_to_str): detect unsuccessful startup and 
+	don't crash; plus some general cleanup.
+	* thread.c (delete_thread): new function, allows targets to 
+	notify gdb when a thread is no longer valid.
+	* infrun.c (wait_for_inferior): don't try to detect a new
+	thread on receiving a TARGET_EXITED event.
+	
+Tue May 20 09:32:02 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Pass callback struct.
+	(init_callbacks): Remove call to sim_set_callbacks.
+
+Thu May 15 07:56:50 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/rs6000/tm-rs6000.h (SIG_FRAME_LR_OFFSET):  Define.
+	* rs6000-tdep.c (frameless_function_invocation):  Mark frames
+	with a zero PC as frameless to improve backtraces from core dumps
+	caused by dereferencing a NULL function pointer.
+	(frameless_function_invocation, frame_saved_pc, rs6000_frame_chain):
+	Handle frameless functions interrupted by a signal.
+
+	* sparc-tdep.c (sparc_init_extra_frame_info, sparc_frame_saved_pc):
+	Handle frameless functions interrupted by a signal.
+
+Wed May 14 08:58:55 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Update prologue comments
+	to reflect current reality.  Gross attempt at handling out of
+	line prologues.
+
+	* mn10200-tdep.c (mn10200_skip_prologue): Don't look at the debug
+	symbols to find the end of the prologue.
+	* mn10300-tdep.c (mn10300_skip_prologue): Likewise.
+
+Thu May  8 08:42:47 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure.in (AC_TYPE_SIGNAL): Add
+	* configure: Re-generate.
+	* remote-sim.c: Signal returns RETSIGTYPE.
+	
+Wed May  7 20:05:07 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* target.h (target_stop): Drop argument so it can be tested for
+ 	NULL.
+
+Sat May  3 20:51:48 1997  Mark Alexander  <marka@cygnus.com>
+
+	* utils.c (floatformat_from_doublest): Handle infinity properly.
+
+Thu May  1 11:44:46 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* Finalize merge from Hurd folk.  
+	    Mon Oct 30 16:41:04 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+	    * thread.c (thread_apply_command, thread_apply_all_command,
+	    thread_command): Make sure TP is alive.
+	    (thread_alive): New function.
+	    Tue Nov 14 14:31:03 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+	    * infrun.c (sig_print_info): Deal better with long signal names.
+	    Wed Nov 22 15:23:35 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+	    * thread.c (thread_id_to_pid): New function.
+	    Fri Dec  1 13:25:25 1995  Miles Bader  <miles@gnu.ai.mit.edu>
+	    * gnu-nat.c: (set_thread_cmd_list, show_thread_cmd_list,
+	    set_thread_default_cmd_list, show_thread_default_cmd_list): 
+	    New variables.  (set_thread_cmd, show_thread_cmd, 
+	    set_thread_default_cmd, show_thread_default_cmd): New functions.
+	    Fri Apr 18 15:20:16 1997  Miles Bader  <miles@gnu.ai.mit.edu>
+	    * gnu-nat.c (inf_startup): remove TASK parameter. 
+	    (inf_set_task): replace with new function (inf_set_pid).  
+	  * gdbthread.h: Add extern decl for thread_cmd_list.
+	
+Thu May  1 02:28:21 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* printcmd.c (disassemble_command):  Adjust low function bound
+	by FUNCTION_START_OFFSET.
+
+Mon Apr 28 21:25:32 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* Makefile.in: Add rule for gnu-nat.o and i386gnu-nat.o (Gnu Hurd)
+	* config/i386/i386gnu.mh: remove rules for [i386]gnu-nat.o, now 
+	in Makefile.in (as for other targets); add NATDEPFILE corelow.o to 
+	satisfy symbol dependancy in solib.c (core_ops).
+	* target.[ch] conditionalize Mach-specific signals so that they
+	won't show up in non-Mach gdb's!
+	* thread.c: change name of static function "thread_switch" to 
+	"switch_to_thread", to avoid conflict with Mach global symbol; 
+	move thread_cmd_list to global scope so targets can add their 
+	own thread commands.
+	* infrun.c: sig_print_info: allow for long signal names.
+	* gnu-nat.[ch]: tidying up comments.
+	* gnu-nat.c: remove calls to prune_threads and renumber_threads; 
+	gnu_wait must not return -1 when inferior exits; 
+	attach_to_child will modify inferior_pid in a way that allows
+	fork_inferior to remain unchanged; remove extra arg from 
+	startup_inferior; move Mach thread commands here from thread.c.
+
+Mon Apr 28 18:21:20 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* symtab.c: decode_line_1, replace the assignment to 
+	values.sals[0].pc which I accidentally left out on 4/3/97.
+
+Mon Apr 28 17:27:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* c-exp.y: make parse_number reject "123DEADBEEF".
+	(fix by Bob Manson).
+	* java-exp.y: Ditto.
+	* top.c: change "to enable to enable" to "to enable" in a couple
+	of help strings.
+
+Mon Apr 28 09:01:59 1997  Mark Alexander  <marka@cygnus.com>
+
+	* breakpoint.c (remove_breakpoint): Pass correct type to
+	target_remove_watchpoint.
+	* target.h: Improve comment for target_{remove,insert}_breakpoint.
+
+Sat Apr 26 03:38:02 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* alpha-tdep.c (heuristic_proc_desc):  Increase search limit
+	for return address register, handle `ret' instruction.
+
+	* corelow.c (get_core_registers):  Initialize cf.
+
+	* procfs.c:  Minor changes to make pre-ANSI compilers happy.
+	(procfs_notice_signals):  Copy traced signal set back to
+	pi->prrun.pr_trace.
+	(unconditionally_kill_inferior):  If PR_DEAD is defined,
+	rerun inferior after killing it.
+
+Fri Apr 25 00:10:18 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* config/mn10300/tm-mn10300.h (EXTRACT_STRUCT_VALUE_ADDRESS): The
+	structure value address is found in $a0 now.
+	* config/mn10200/tm-mn10200.h (EXTRACT_STRUCT_VALUE_ADDRESS): Likewise.
+
+Thu Apr 24 13:31:10 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* config/mn10300/tm-mn10300.h (STORE_RETURN_VALUE): Pointers are
+	returned in $a0.
+	(EXTRACT_RETURN_VALUE): Likewise.
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): Check for a return
+	insn at "pc", not "fi->pc".
+
+Wed Apr 23 11:18:45 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* config/mn10200/tm-mn10200.h (STORE_RETURN_VALUE): Pointers are
+	returned in $a0.
+	(EXTRACT_RETURN_VALUE): Likewise.
+
+Tue Apr 22 11:58:15 1997  Fred Fish  <fnf@cygnus.com>
+
+	* config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Define to use
+	floatformat_ieee_double_littlebyte_bigword for little endian
+	target byte order.
+	* utils.c (floatformat_to_doublest): Create local preswapped
+	copy of input for floatformat_littlebyte_bigword formats.
+	(get_field, put_field): Treat floatformat_littlebyte_bigword
+	the same as floatformat_little.
+	(floatformat_from_doublest): Postswap output words for
+	the floatformat_littlebyte_bigwords format.
+
+Tue Apr 22 09:02:10 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/alpha/alpha-osf3.mh config/i386/{i386gnu linux}.mh
+	config/mips/{embed embed64 embedl embedl64 vr4300 vr4300el vr5000
+	vr5000el}.mt config/powerpc/{aix aix4}.mh config/rs6000/{aix
+	aix4}.mh config/sh/sh.mt config/sparc/sp64sim.mt:
+	config/v850/v850.mt:
+	Remove -lm.  That's now handled by configure.
+
+	* Makefile.in (maintainer-clean):  Add distclean to dependencies.
+	Remove duplicate rm's of files.
+
+Mon Apr 21 09:49:25 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote-pa.c:  Remove.  It's broken and no longer necessary.
+
+	Sat Apr 19 11:56:10 1997  Per Bothner  <bothner@deneb.cygnus.com>
+
+	* java-exp.y:  Combine TRUE and FALSE into BOOLEAN_LITERAL.
+	(Avoids name clash with broken AIX header files.)
+
+Sat Apr 19 01:49:37 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* serial.c (serial_log_command):  Fix fputs_unfiltered calls.
+
+	* config/powerpc/tm-ppc-aix4.h, config/rs6000/tm-rs6000-aix4.h
+	(DONT_RELOCATE_SYMFILE_OBJFILE):  Removed.
+	* xcoffsolib.h (struct vmap):  Add new members tvma, toffs and dvma,
+	remove tadj.
+	* exec.c (bfdsec_to_vmap):  Initialize new vmap members, initialize
+	tstart and dstart with section VMA.
+	* rs6000-nat.c (vmap_symtab):  Relocate relative to the VMA in the
+	object file.
+	(vmap_ldinfo, xcoff_relocate_core):  Adjust tstart by section offset
+	of the text section, remove DONT_RELOCATE_SYMFILE_OBJFILE hack.
+	(vmap_exec):  Relocate relative to the VMA in the object file,
+	relocate .bss section as well.
+	(xcoff_relocate_core):  No longer adjust section addresses by VMA.
+	* rs6000-tdep.c (find_toc_address):  Change type of tocbase
+	to CORE_ADDR.
+	* xcoffread.c (secnum_to_bfd_section):  New routine to get
+	BFD section from CS section number.
+	(scan_xcoff_symtab):  Make toc_offset section relative.
+
+	* symtab.c (total_number_of_methods):  Avoid core dump if
+	baseclass type is still undefined.
+
+Fri Apr 18 17:25:10 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in (SUBDIRS):  Add mswin so that make cleanup cleans up
+	that directory.
+	* defs.h utils.c (error warning):  Make message be const.
+	* main.c (fputs_unfiltered):  Only send gdb_stdout and gdb_stderr
+	to hook.  Otherwise send it to fputs.
+	* monitor.c monitor.h (monitor_get_dev_name):  New function.  Does
+	the obvious.
+	* remote-e7000.c:  Remove debugify stuff.  Change printf, fprintf
+	to _filtered forms to make output appear in GUIs.  Replace all
+	uses of SERIAL_READCHAR with readchar, which has better error
+	checking.
+	* (e7000_parse_device):  Add prototype.
+	(readchar):  Improve doc.  Handle random serial errors.
+	(expect):  Disable notice_quit code.  It's busted.  Remove
+	serial error handling (it's now handled in readchar).  Remove
+	remote_debug echoing.  That's handled in readchar as well.
+	(e7000_parse_device):  Remove serial_flag arg.  It's not
+	necessary.
+	(e7000_open):  Split into two pieces.  Second part is
+	e7000_start_remote, and is error protected.  Now, when we connect
+	to the target, we setup the initial frame and registers so that
+	the user gets an immediate indication of where the target is.
+	(gch):  Remove debug output.  That's handled by readchar.
+	(e7000_read_inferior_memory):  Handle errors better.
+	(_initialize_remote_e7000):  Get rid of `<xxx>' things from
+	command names.  They show up when doing completion and confuse
+	things horribly.
+	* ser-e7kpc.c: Get rid of the DLL's since we can access the device
+ 	directly from Win32s and Win95.  Get rid of debugify crud.
+	* serial.c:  Remove debugify cruft.
+	* (serial_logchar serial_log_command serial_write serial_readchar
+	serial_send_break serial_close):  Merge common functionality into
+	serial_logchar.  Clean up rest of routines.
+	* sparclet-rom.c:  Disembowel.  Leave only download routine.
+	Download routine now switches to remote target automatically.
+	* top.c (disconnect):  Only define if SIGHUP is defined.  Cleans
+	up MSVC/Win32 problem.
+	* utils.c (gdb_flush):  Don't call hook unless it's for gdb_stdout
+	or gdb_stderr.
+	* config/sh/tm-sh.h:  Define TARGET_SH for WinGDB.
+	* config/sparc/tm-sparclet.h:  Remove override for prompt.
+
+Fri Apr 18 13:38:19 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Only pass -E to sim_open if
+	TARGET_BYTE ORDER_SELECTABLE.
+
+Fri Apr 18 16:52:41 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (init_callbacks): Initialize poll_quit and magic
+ 	fields of gdb_callback.
+	(gdbsim_stop): Add gdbsim_stop to list of supported client
+ 	operations.
+	(gdbsim_wait, gdbsim_resume): Move call to sim_resume into
+ 	sim_wait where gdb is in a position to handle a long running
+ 	function.
+	(gdbsim_cntrl_c): New function.  Wrap the sim_resume call in a
+ 	SIGINT handler.
+	(gdb_os_poll_quit): New function. Check for a quit pending on the
+ 	console.
+
+Thu Apr 17 14:30:04 1997  Per Bothner  <bothner@deneb.cygnus.com>
+
+	* objfiles.c (allocate_objfile):  Allow NULL bfd argument.
+	* defs.h (enum language):  Add language_java.
+	* java-exp.y, java-lang.c, java-lang.h, java-valprint.c:  New files.
+	* Makefile.in:  Update for new files.
+	* symfile.c (deduce_language_from_filename):  Recognize .java.
+
+Thu Apr 17 02:20:23 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* m32r-stub.c (stash_registers): Rewrite.
+	(restore_registers): Renamed to restore_and_return.
+	(cleanup_stash): New function.
+	(process_exception): New function.
+	(_catchException*): Rewrite.
+
+	* remote-sim.c (gdbsim_load): Update call to sim_load.
+	(gdbsim_create_inferior): No longer pass start_address to
+	sim_create_inferior.
+	(gdbsim_open): Pass endian indicator as arg.
+
+Tue Apr 15 15:31:09 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (get_offsets): Don't use scanf for interpreting
+	response to qOffsets.
+
+Tue Apr 15 14:51:04 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* gdbserver/Makefile.in (INSTALL_XFORM): Remove.
+	(INSTALL_XFORM1): Remove.
+	(install-only): Use $(program_transform_name) directly, rather
+	than using $(INSTALL_XFORM) and $(INSTALL_XFORM1).
+	(uninstall): Transform name.
+
+Mon Apr 14 17:06:27 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c (mips_load): Ensure that PC gets updated
+	after a load on LSI target.
+
+Mon Apr 14 15:54:51 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
+
+	* procfs.c (notice_signals): fix typo
+
+Mon Apr 14 16:25:10 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* gdbserver/Makefile.in (INSTALL): Change install.sh to
+	install-sh.
+
+Mon Apr 14 11:55:27 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
+
+	* config/i386/cygwin32.mh: remove -lkernel32 from XM_CLIBS
+	since gcc automatically includes it
+
+Thu Apr 10 13:20:53 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* procfs.c: Substantial (but incomplete) changes to support
+	sysv4.2mp procfs as implemented in UnixWare 2.1.  The procinfo
+	struct now has substructs like struct flt_ctl instead of
+	just a fltset_t and has a ctl_fd, status_fd, as_fd, and
+	map_fd instead of a single fd.  Non-sysv4.2mp procfs models
+	still have the structs and multiple fds, but don't use the
+	entire struct and the four fds all point to the same thing.
+	We use PROCFS_USE_READ_WRITE to decide whether to talk to
+	procfs with reads/writes or use ioctl instead.  We use
+	HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
+	multiple fds or not.  PROC_NAME_FMT is split out into
+	CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT, 
+	STATUS_PROC_NAME_FMT.
+	
+	(procfs_notice_signals): now a necessary wrapper around
+	(notice_signals): which are the new guts for noticing signals
+	(open_proc_file): gets a new flag arg used in sysv4.2mp to
+	determine whether or not to attempt to open the ctl_fd.
+	(procfs_read_status): new local function, reads procfs status
+	(procfs_write_pcwstop): new local function, writes a PCWSTOP
+	(procfs_write_pckill): new local function, writes a PCKILL
+	(unconditionally_kill_inferior): remove signo since we now
+	just call procfs_write_pckill().
+	(procfs_xfer_memory): call lseek with SEEK_SET rather than 0	
+	(proc_iterate_over_mappings): the whole function is ifdefed
+	on UNIXWARE to keep things readable.
+	
+	Expanded the syscall_table to include new potential sysv4.2mp
+	members.  Note that all ifdefs of UNIXWARE should be eliminated
+	if possible or renamed to describe what's being selected for a
+	bit better.  Sysv4.2mp and IRIX both have SYS_sproc so the
+	IRIX specific code now also checks it's not UNIXWARE.
+
+	* config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
+	HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
+	* config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
+	"/debug/%d" as PROC_NAME_FMT used to be
+
+Wed Apr  9 11:36:14 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c: Almost completely rewritten based on mn10200
+	port.
+	* config/mn10300/tm-mn10300.h: Likewise.
+
+Tue Apr  8 10:45:24 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/pa/{hppabsd.mt hppahpux.mt hppaosf.mt}:  Remove
+	remote-pa.o from TDEPFILES.  Nobody uses it, and besides, it's a
+	lousy out-of-date clone of remote.c.
+
+Fri Apr  4 08:21:21 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote.c:  Fix problems realized while showering.
+	* (hexnumlen):  Add prototype.  Use max, not min.
+	* (remote_write_bytes remote_read_bytes):  Fix max packet size
+	calculations to properly account for packet overhead.  Also handle
+	(probably rare) case where remote_register_buf_size isn't set.
+
+	* remote.c:  Fix doc for `C' and `S' commands to indicate full
+	address.
+	* (remote_ops extended_remote_ops remote_desc remote_write_size):
+	Make static.
+	* (remote_fetch_registers remote_write_bytes remote_read_bytes):
+	Record size of response to fetch registers command, use this to
+	limit size of memory read and write commands.
+	* (push_remote_target):  New function to make it possible to have
+	another target switch to the remote target.
+	* target.h:  Add prototype for push_remote_target.
+	* sh-tdep.c (sh_frame_find_saved_regs):  Fix sign extension bugs
+	for hosts which default to unsigned chars (such as SGI's).
+	* (_initialize_sh_tdep):  Don't set remote_write_size.  It's now
+	handled automatically in remote.c.
+
+Thu Apr  3 15:10:30 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* blockframe.c: blockvector_for_pc_sect(), block_for_pc_sect(), 
+	find_pc_sect_function(), find_pc_sect_partial_function(): new 
+	functions for debugging overlays; pc without section is ambiguous.
+	* breakpoint.[ch]: add section pointer to breakpoint struct;
+	add section argument to check_duplicates(); check section as well
+	as pc in [breakpoint_here_p(), breakpoint_inserted_here_p(),
+	breakpoint_thread_match(), bpstat_stop_status()];  
+	add section argument to describe_other_breakpoints(); 
+	use INIT_SAL() macro to zero-out new sal structures; 
+	make resolve_sal_pc() fix up the sal's section as well as its pc; 
+	match on section + pc in clear_command() and delete_breakpoint(); 
+	account for overlay sections in insert_breakpoints(), 
+	remove_breakpoint() and breakpoint_re_set_one();
+	all this to support overlays where a PC is not unique.
+	* exec.c: change xfer_memory() to handle overlay sections.
+	* findvar.c: change read_var_value() to handle overlay sections.
+	* frame.h: declaration for block_for_pc_sect() [blockframe.c].
+	* infcmd.c: jump_command() warns against jumping into an overlay
+	that's not in memory.  Also use INIT_SAL() to initialize sals.
+	* infrun.c: wait_for_inferior() sets a flag to invalidate cached
+	overlay state information; Also use INIT_SAL() to init sals.
+	* m32r-rom.c: modify load routines to use LMA instead of VMA.
+	* m32r-stub.c: mask exit value down to 8 bits; screen out any
+	memory read/writes in the range 600000 to a00000, and ff680000
+	to ff800000 (hangs because nothing is mapped there); fix strcpy().
+	* maint.c: maintenance command "translate-address" supports overlays.
+	* minsyms.c: lookup_minimal_symbol_by_pc_sect() supports overlays.
+	* objfiles.[ch]: add ovly_mapped field to the obj_section struct;
+	this constitutes gdb's internal overlay mapping table.  Add macro
+	ALL_OBJSECTIONS() to loop thru the obj_structs and look at overlays.
+	Add function find_pc_sect_section().
+	* printcmd.c: modify print_address_symbolic() with overlay smarts;
+	modify address_info() with overlay smarts; add function sym_info() 
+	to support the INFO SYMBOL command (translate address to symbol(s));
+	modify disassemble_command() to work on unmapped overlays.
+	* source.c: use INIT_SAL() to initialize sals.
+	* symfile.[ch]: change generic_load() to use section's LMA address
+	instead of VMA address, for overlay sections.
+	Add numerous functions for finding a PC's section / overlay, 
+	translating between VMA and LMA address ranges, determining if an
+	overlay section is mapped, etc.  Add several user commands for
+	overlay debugging.  Add support for a "generic" form of automatically
+	reading overlay mapping info from the inferior (based on the default
+	(simple) overlay manager which Cygnus provides as an example).
+	* symtab.[ch]: add functions find_pc_sect_symtab(), 
+	find_pc_sect_psymtab(), find_pc_sect_psymbol(), find_pc_sect_line()
+	for lookup; modify lookup_symbol and decode_line_1() to use them;
+	modify find_function_start_sal() to account for overlay sections;
+	add macro INIT_SAL() for initializing struct symtab_and_line.
+	* target.c: fix a comment in the declaration of target_ops.
+
+Thu Apr  3 10:31:12 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips_in_call_stub, mips_in_return_stub,
+	mips_skip_stub, mips_ignore_helper): New functions for dealing
+	with MIPS16 call/return thunks.
+	(mips_init_frame_pc_first): New function to implement
+	INIT_FRAME_PC_FIRST macro; includes code from old macro plus
+	new code to skip over MIPS16 thunks.
+	(mips_frame_chain): Skip over MIPS16 thunks.
+	* config/mips/tm-mips.h (mips_in_call_stub, mips_in_return_stub,
+	mips_skip_stub, mips_ignore_helper): Declare.
+	(IN_SOLIB_CALL_TRAMPOLINE, IN_SOLIB_RETURN_TRAMPOLINE,
+	SKIP_TRAMPOLINE_CODE, IGNORE_HELPER_CALL): New macros that invoke
+	the above functions.
+	(INIT_FRAME_PC_FIRST): Change to invoke mips_init_frame_pc.
+	(mips_init_frame_pc): Declare.
+	* infrun.c (wait_for_inferior): Use new IGNORE_HELPER_CALL macro
+	to decide if certain library function calls should be ignored.
+
+Wed Apr  2 14:16:51 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* remote-sim.c (gdbsim_open): Check return code from sim_open.
+	Update call to sim_open (new arg SIM_OPEN_DEBUG).
+
+Mon Mar 31 14:55:53 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* gdbinit.in: New file.
+	* .gdbinit: Remove.
+	* configure.in: Generate .gdbinit from gdbinit.in.
+	* configure: Rebuild.
+
+Sat Mar 29 13:57:20 1997  Fred Fish  <fnf@cygnus.com>
+
+	* COPYING: Install new version of file from FSF.
+	* copying.c (show_copying_command): Update FSF address.
+
+Fri Mar 28 18:33:41 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (distclean): Remove .gdbinit.
+
+Fri Mar 28 15:38:04 1997  Mike Meissner  <meissner@cygnus.com>
+
+	* remote-sim.c (gdb_os_{,e}vprintf_filtered): Change stdarg type
+	to va_list from void *, since va_list might not be a pointer
+	type.
+
+Thu Mar 27 14:21:46 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c: Clean up comment and extraneous semicolon
+	for mips_monitor_prompt variable.
+
+Thu Mar 27 12:46:58 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c: Add `set monitor-prompt' command.
+
+Wed Mar 26 06:47:44 1997  Mark Alexander  <marka@cygnus.com>
+
+	Fix from Peter Schauer:
+	* mdebugread.c (parse_procedure): Set address of procedure to
+	block start; this fixes problems with shared libraries introduced
+	by change of Mar 21.
+
+Mon Mar 24 19:43:16 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* symtab.c (find_pc_symtab): change to support the case
+	where the objfile is reordered and contains both coff and
+	stabs debugging info (continue on if a psymtab isn't found).
+
+Sun Mar 23 16:19:20 1997  Mark Alexander  <marka@cygnus.com>
+
+	Fixes from Peter Schauer:
+	* config/mips/tm-mips.h (REGISTER_CONVERT_TO_TYPE,
+	REGISTER_CONVERT_FROM_TYPE): Swap words if target, not host,
+	is big-endian and if registers are 32 bits.
+	* mips-tdep.c (mips_print_register, mips_extract_return_value,
+	mips_store_return_value): Fix floating-point word-order problems on
+	little-endian targets introduced by changes of Mar 21.
+
+Sun Mar 23 15:43:27 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (target_resume_hook, target_wait_loop_hook): New
+ 	globals.
+ 	(remote_resume, remote_wait): Use them.
+	* d10v-tdep.c: Set the above hooks.
+	(tracesource): New GDB variable, controls source display in
+ 	traces.
+	(display_trace): Find and display source line if requested.
+	(trace_info): Mention empty trace buffer if appropriate.
+	(tdisassemble_command): Robustify argument handling.
+
+	* configure.host: Remove extra bogus Linux case.
+
+Sat Mar 22 16:41:35 1997  Fred Fish  <fnf@cygnus.com>
+
+	* remote-sim.c (simulator_command): Add comment about dealing with
+	NULL or empty args.
+
+Sat Mar 22 02:48:11 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-exp.y (yylex):  Handle nested template parameter lists.
+	* symtab.c (decode_line_2):  Fix test for valid choice number.
+
+Fri Mar 21 19:10:05 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): On non-EABI architectures,
+	copy first two floating point arguments to general registers, so that
+	MIPS16 functions will receive the arguments correctly.
+	(mips_print_register): Print double registers correctly on
+	little-endian hosts.
+	(mips_extract_return_value): Return double values correctly
+	on little-endian hosts.
+
+	* mdebugread.c (parse_procedure): Adjust address of procedure relative
+	to address in file descriptor record; this accounts for constant
+	strings that may precede functions in the text section.  Remove
+	now-useless lowest_pdr_addr from argument list and all calls.
+
+Fri Mar 21 15:36:25 1997  Michael Meissner  <meissner@cygnus.com>
+
+	* configure.tgt (powerpc*-{eabi,linux,sysv,elf}*): Determine
+	whether the simulator will be built by whether the Makefile in the
+	simulator directory was built.
+
+	* configure.in (--enable-sim-powerpc): Delete switch.
+	* configure: Regenerate.
+
+Thu Mar 20 20:52:04 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Look for save of "a1"
+	in the prologue too.
+
+	* remote-sim.c (gdb_os_vprintf_filtered): Fix to work with non-ANSI
+	compilers.
+	(gdb_os_evprintf_filtered): Similarly.
+	
+Wed Mar 19 16:13:22 1997  Geoffrey Noer  <noer@pizza.cygnus.com>
+
+	New UnixWare 2.1 configuration
+	* config/i386/i386v42mp.mt: new
+	* config/i386/i386v42mp.mh: new
+	* config/i386/tm-i386v42mp.h: new
+	* config/i386/nm-i386v42mp.h: new
+	* configure.tgt: added new entries
+	* configure.host: added new entries
+
+Mon Mar 17 17:52:00 1997  J.T. Conklin  <jtc@cygnus.com>
+
+	* dsrec.c (load_srec): Print leading zeroes when printing section
+ 	addresses.
+
+Mon Mar 17 15:00:16 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* remote-sim.h: Delete - moved to ../include/remote-sim.h.
+ 	
+	* Makefile.in (remote_utils_h): Update path to remote-sim.h.
+
+Fri Mar  7 20:55:28 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* remote-sim.c (flush_stdout, write_stderr, flush_stderr,
+ 	vprintf_filtered, evprintf_filtered): Callbacks that accept
+ 	varargs.
+	
+Sat Mar 15 00:50:46 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* breakpoint.c (insert_breakpoints, watchpoint_check,
+	bpstat_stop_status):  Do not disable watchpoints going out of scope.
+	(insert_breakpoints):  Make sure that the current frame is valid
+	before calling find_frame_addr_in_frame_chain.
+
+	* top.c (setup_user_args):  Handle quotes and backslashes.
+	(print_gdb_version):  Update copyright year.
+
+Fri Mar 14 15:44:03 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (elfread.o): Depend upon elf-bfd.h and elf/mips.h.
+
+Thu Mar 13 22:51:00 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* utils.c (pollquit, notice_quit): If _WIN32, limit test for
+	cntl-C to wingdb.
+	(initialize_utils): If _WIN32, don't call ScreenRows and ScreenCols 
+	except under wingdb.  (Contributed by Martin Hunt).
+
+Thu Mar 13 12:40:49 1997  Tom Tromey  <tromey@cygnus.com>
+
+	* configure: Regenerated.
+	* configure.in: Run AC_CONFIG_AUX_DIR before AC_CANONICAL_SYSTEM.
+
+Thu Mar 13 11:00:22 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* remote-sim.h (sim_state, SIM_DESC): New types.
+	(sim_open): Return a `descriptor' as result.
+	(*): New argument of descriptor result from sim_open.
+	* remote-sim.c (gdbsim_desc): Renamed from gdbsim_open_p.
+	(gdbsim_open): Record result of sim_open in gdbsim_desc.
+	Pass argv list to sim_open, argv[0] = pseudo program name.
+	(*): Pass gdbsim_desc to sim_foo fns.
+
+Wed Mar 12 14:40:06 1997  Tom Tromey  <tromey@cygnus.com>
+
+	* config.in: Regenerated.
+
+	* acconfig.h (START_INFERIOR_TRAPS_EXPECTED, sys_quotactl,
+	HAVE_HPUX_THREAD_SUPPORT): Define.
+
+Tue Mar 11 07:25:27 1997  Mark Alexander  <marka@cygnus.com>
+
+	First cut at supporting simulators in gdbserver:
+
+	* configure, configure.in: Allow gdbserver to be configured
+	for cross-target environments.
+	* gdbserver/Makefile.in: Add simulator support.
+	* gdbserver/configure.in: Eliminate assumption that host == target.
+	Simplify using gdb/configure.tgt and gdb/configure.host.
+	Fix other minor configuration errors.
+	* gdbserver/low-sparc.c: Fix compile error.
+	* gdbserver/remote-utils.c: Eliminate assumption that registers
+	and addresses are four bytes.  Fix minor compile errors and warnings.
+	* gdbserver/server.c: Rewrite numerous instances of identical code
+	for starting inferior processes to call new function start_inferior.
+	Eliminate assumption that registers and addresses are four bytes.
+	* gdbserver/server.h: Add missing prototypes to eliminate compiler
+	warnings.
+	* gdbserver/low-sim.c: New file to mate gdbserver with simulators.
+	* config/mips/vr5000.mt: Add Vr5000 simulator support to gdbserver.
+	* config/i386/linux.mh: Eliminate gdbserver support as a first step
+	in moving such support from host to target makefile fragments.
+	* config/i386/linux.mt: Move gdbserver support here from linux.mh.
+
+Mon Mar 10 12:27:47 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* symtab.h (INIT_SAL): New macro to initialize symtab_and_line, 
+	to insure consistant initialization of unused fields to zero.
+	* symtab.c: replace initializations of sals with new macro INIT_SAL.
+	* breakpoint.c: ditto.
+	* infrun.c: ditto.
+	* infcmd.c: ditto.
+	* source.c: add call to INIT_SAL macro.
+
+Sat Mar  8 00:16:37 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (isbranch):  Always handle v9 branch instructions,
+	they might get used on 32 bit targets as well.
+
+Wed Mar  5 19:34:09 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* remote-mips.c (mips_exit_debug): Some IDT boards don't
+	send the full exit string.
+
+Wed Mar  5 12:59:27 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200-tdep.c (mn10200_push_arguments): Handle new calling
+	conventions.
+	(mn10200_store_struct_return): Likewise.
+
+Tue Mar  4 10:31:02 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips_fetch_instruction): New function; replace
+	common code throughout with calls to it.
+	(mips_find_saved_regs): Examine MIPS16 entry instruction to determine
+	correct saved addresses of $s0 and $s1.
+	(mips_find_saved_regs, mips16_heuristic_proc_desc):  Use MIPS_REGSIZE
+	instead of hardcoded 4.
+	(mips16_skip_prologue): Handle extended instructions correctly.
+
+Mon Mar  3 12:29:20 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* defs.h (LONGEST): Move #ifndef LONGEST to outside.
+	Try BFD_HOST_64_BIT if ! CC_HAS_LONG_LONG.
+
+Thu Feb 27 18:54:11 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (IS_MIPS16_ADDR, MAKE_MIPS16_ADDR, UNMAKE_MIPS16_ADDR):
+	New macros for testing, setting, and clearing bit 0 of addresses.
+	Change numerous bits of code where bit 0 was being manipulated
+	to use these macros.
+
+Thu Feb 27 14:12:41 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c: Put back the form feeds.
+
+Thu Feb 27 12:04:24 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c: Remove form feeds (^L) from source.
+	(mips_initialize): LSI PMON doesn't support 'set regsize' command.
+	(pmon_wait): Don't need to exit and re-enter debug mode on LSI
+	PMON after a continue; it causes target program misbehavior.
+	(mips_fetch_register): Don't fetch unsupported registers; this
+	cuts down on wasted serial traffic.
+
+Thu Feb 27 09:38:16 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* configure.in configure (HPUX/OSF thread support):  Enable this
+	only when running GCC, since HP's thread header files use ANSI C
+	which is not supported by their default compiler.
+
+	* configure.host (i[3456]86-*-windows):  Disable long long
+	support for WinGDB.  Add mswin to configdirs.
+	* configure.in configure:  Move calls to configure.host and
+	configure.tgt to the top of configure.in to allow them to set
+	config variables before they are referenced.
+
+Tue Feb 25 20:21:52 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.tgt (mips*-*-lnews*): New target.
+
+Mon Feb 24 16:35:00 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Don't fix fi->frame
+	if we're not the innermost frame.  Fix minor typos.
+
+Sat Feb 22 03:39:50 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* stabsread.c (read_type):  Fix handling of template names
+	with template parameters containing `::'.
+
+	* valops.c (search_struct_field, search_struct_method):
+	Pass correct valaddr parameter to baseclass_offset.
+	Prevent gdb crashes by making sure that the virtual base pointer
+	from an user object still points to accessible memory.
+
+Tue Feb 18 13:36:34 1997  Mark Alexander  <marka@cygnus.com>
+
+	* maint.c: Eliminate -Wall warnings by including some header files.
+
+Tue Feb 18 13:06:30 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-sim.c (init_callbacks): Undo previous change.
+
+Tue Feb 18 11:13:00 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* maint.c: Fix dereference of pointer.
+	* remote-sim.c: Fix reference of structure member "last_error".
+	* debugify.c: Include config.h to get ANSI definitions.
+
+Sat Feb 15 17:43:46 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* remote-vx.c (vx_attach): Remove code added by kung.  It made no
+ 	sense.
+
+Fri Feb 14 13:00:07 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* main.c (print_gdb_help): Make static to match declaration.
+
+Thu Feb 13 18:18:18 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* remote-e7000.c, ser-e7kpc.c, serial.c: Remove // comments.
+
+Wed Feb 12 15:58:00 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* debugify.c, debugify.h: Make safe for non-ansi compilers.
+
+Wed Feb 12 15:30:00 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* defs.h: Fix prototypes for new cleanup functions.
+
+Wed Feb 12 15:08:47 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* debugify.c, debugify.h: Fix for general gnu use.  Remove C++ 
+	comment, add PARAMS, add license info and fix indentation.
+
+Wed Feb 12 14:42:47 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* debugify.c, debugify.h: New files.  Provide common macros
+	for writing debug info to a log file or stdio.
+
+Wed Feb 12 02:44:39 1997  Dawn Perchik  <dawn@cygnus.com>
+
+        * c-valprint.c (c_val_print): Fix printing for arrays defined
+        with 0 length.
+
+Tue Feb 11 22:24:39 1997  Dawn Perchik  <dawn@cygnus.com>
+
+	* defs.h: Fix cntl-C to read from the Windows message queue.
+	Add prototypes for make_final_cleanup (and the other cleanup
+	routines.
+	* remote-e7000.c: Fix sync code to timeout if unable to sync.
+	Change sync code to report status while trying to sync-up 
+	with hardware.  Add debugging output and document.
+	* ser-e7kpc.c: Swap order of len & offset to match implementation.
+	Add debugging output and document.
+	* serial.c: Add debugging output.
+	* top.c: Add call to do_final_cleanups.
+	Remove conditionals preventing Win32 from getting SIGQUIT.
+	* utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
+	chain as a parameter.  Extract this generic code from the cleanup 
+	routines into separate funtions (*_my_cleanup).  Keep old 
+	functionality by passing "cleanup_chain" to the new funtions.  
+	Define the cleanup chain "final_cleanup_chain" to be a cleanup 
+	chain which will be executed only when gdb exits.  Add functions 
+	(*_final_cleanup) to match the original (*_cleanup) functions.
+	(pollquit, quit, notice_quit): Fix to read cntl-C from the 
+	Windows message queue.
+
+Tue Feb 11 15:36:31 1997  Doug Evans  <dje@canuck.cygnus.com>
+
+	* m32r-rom.c: #include <sys/types.h>.
+	#ifdef out new load support if wingdb.
+	* m32r/tm-m32r.h (TARGET_M32R): Define, for wingdb.
+
+Tue Feb 11 12:28:09 1997  Jeffrey A Law  (law@cygnus.com)
+
+
+	* config/mn10200/tm-mn10200.h (STORE_STRUCT_RETURN): Fix.
+	* mn10200-tdep.c (mn10200_store_struct_return): New function.
+
+	* config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Fix case when
+	extracting a return value from a register pair.
+
+	* mn10200-tdep.c (mn10200_push_arguments): Stack only needs to
+	be two byte aligned.  Round argument sizes up to two byte boundary.
+	Write out args in two byte hunks.
+	(mn10200_push_return_address): Implement.
+	* config/mn10200/tm-mn10200.h (EXTRACT_RETURN_VALUE): Abort for
+	structures > 8 bytes (temporary).
+	(STORE_RETURN_VALUE): Likewise.
+	(CALL_DUMMY): No longer undefine.
+	(USE_STRUCT_CONVENTION): Use for args > 8 bytes.
+	(REG_STRUCT_HAS_ADDR): Define.
+	
+Mon Feb 10 18:35:55 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (non_heuristic_proc_desc): New function.
+	(find_proc_desc): Move non-heuristic proc search code into separate
+	function.
+	(gdb_print_insn_mips): Use non-heuristic method to find procedure
+	descriptor, to avoid prologue examination when disassembling.
+	* remote-mips.c: Add support for new "lsi" target (LSI MiniRISC
+	aka MicroMeteor board).
+	(mips_exit_debug): Prevent protocol reinitialization if an error
+	occurs while exiting debug mode.
+
+Mon Feb 10 16:11:57 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10200-tdep.c: Remove lots of debugging printfs, update/improve
+	comments, formatting, etc.  Plus other minor fixes for problems
+	I found during my first pass over the mn10200 port.
+	(mn10200_analyze_prologue): New function.
+	(mn10200_frame_chain, mn10200_init_extra_frame_info): Use it.
+	* config/mn10200/tm-mn10200.h: Lots of updates/improvements to
+	comments, formatting, etc.  Minor fixes for problems I found during
+	my first pass over the mn10200 port.
+	(TARGET_*_BIT): Define appropriately for ints, long longs, doubles and
+	pointers.
+	(REGISTER_VIRTUAL_TYPE): Define as a long.
+	(EXTRACT_RETURN_VALUE): Rework to deal with long ints living
+	in register pairs.
+	(STORE_RETURN_VALUE): Similarly.
+
+	* blockframe.c (generic_get_saved_regs): Remove unused variable
+	"addr".
+	* breakpoint.c (frame_in_dummy): Move struct breakpoint *b decl
+	inside #ifdef CALL_DUMMY.
+	(watch_command_1): Initialize target_resources_ok.
+	* command.c (do_setshow_command): Provide dummy initialization
+	for "match".
+	* valops.c (find_function_addr): Move function & prototype inside
+	#ifdef CALL_DUMMY.
+	(value_arg_coerce): Similarly.
+	(value_of_variable): Provide dummy initialization of "frame".
+
+Mon Feb 10 07:54:26 1997  Fred Fish  <fnf@cygnus.com>
+
+	* xcoffread.c (RECORD_MINIMAL_SYMBOL): Add NULL asection* parameter
+ 	to prim_record_minimal_symbol_and_info call that was missed in Jan 3
+	change.
+	(scan_xcoff_symtab): Ditto.
+
+Sun Feb 09 09:23:26 1997  Mark Alexander  <marka@cygnus.com>
+
+	* remote-mips.c (common_breakpoint): Prevent 64-bit addresses
+	from being sent to 32-bit targets by masking off upper bits.
+	* mips-tdep.c (heuristic_proc_start): Mask off upper 32 bits
+	of PC on 32-bit targets.
+	(mips16_heuristic_proc_desc): Recognize 'addiu s1,sp,n' as a
+	frame setup instruction.
+	(mips32_heuristic_proc_desc): Fix warning found by gcc -Wall.
+	(mips16_skip_prologue): Recognize 'addiu s1,sp,n' as a valid
+	prologue instruction.  Fix warnings and bugs found by gcc -Wall.
+	* buildsym.c (finish_block): Improve handling of overlapping blocks;
+	fixes problem on MIPS16 printing function arguments.
+
+Sat Feb  8 01:14:43 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dwarf2read.c (dwarf2_linkage_name):  New function to get
+	the linkage name of a die from DW_AT_MIPS_linkage_name or
+	DW_AT_name.
+	(read_func_scope, dwarf2_add_field, dwarf2_add_member_fn,
+	new_symbol):  Use it instead of accessing DW_AT_name.
+	(read_partial_die):  Use DW_AT_MIPS_linkage name as name of the
+	partial die if present.
+	(dwarf2_add_member_fn):  Make a copy of physname on the type obstack.
+
+Fri Feb  7 10:06:22 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* blockframe.c (generic_frame_chain_valid): If the new frame
+	is not INNER_THAN the old frame, then it's not valid.
+
+Tue Feb 04 09:04:37 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips16_get_imm): Fix calculation of extended immediate.
+	(mips16_heuristic_proc_desc): Recognize jal(x) instruction.
+
+Mon Feb 03 17:57:58 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mips16_decode_reg_save): Distinguish between
+	sd and sw instructions correctly.
+	(heuristic_proc_start): Add support for MIPS16.
+	(mips16_get_imm, mips16_heuristic_proc_desc,
+	mips32_heuristic_proc_desc): New helper functions for
+	heuristic_proc_desc.
+	(heuristic_proc_desc): Rewrite and reorganize to support MIPS16.
+	(mips_push_arguments): Don't align small arguments in EABI.
+	(mips32_skip_prologue): Attempt to shrink code size a little.
+
+Mon Feb  3 11:06:05 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-stub.c: New -- remote protocol support for M32R cpu.
+	* m32r-rom.c:  Several experiments with improved download time.
+
+Fri Jan 31 08:26:39 1997  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (MIPS16_INSTLEN): Define.
+	(mips_find_saved_regs): Replace hardcoded 2's with MIPS16_INSTLEN.
+	(heuristic_proc_start): Recognize 'entry' pseudo-op as a start
+	of function on MIPS16.
+	(mips32_skip_prologue, mips16_skip_prologue): New helper functions
+	for mips_skip_prologue.
+	(mips_skip_prologue): Recognize both 16- and 32-bit prologues.
+
+Wed Jan 29 12:45:54 1997  Michael Meissner  <meissner@tiktok.cygnus.com>
+
+	* config/powerpc/ppc{,le}-sim.mt (SIM): Remove the library
+	../sim/common/libcommon.a.
+
+Tue Jan 28 15:54:13 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* blockframe.c: fix a null pointer ref in generic_get_saved_register
+
+Tue Jan 28 15:39:50 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* mn10200-tdep.c (mn10200_frame_chain): Get basic backtracing
+	working.
+
+Mon Jan 27 14:31:52 1997  Mark Alexander  <marka@cygnus.com>
+
+First set of changes for mips16:
+	* config/mips/tm-mips.h (MIPS16_BIG_BREAKPOINT,
+	MIPS16_LITTLE_BREAKPOINT, BREAKPOINT_FROM_PC): Define.
+	(ABOUT_TO_RETURN): Call new function mips_about_to_return.
+	(mips_breakpoint_from_pc, mips_about_to_return): Declare.
+	* mem-break.c (memory_breakpoint_from_pc): New function.
+	(memory_insert_breakpoint, memory_remove_breakpoint): Use
+	memory_breakpoint_from_pc to determine breakpoint contents and size.
+	* target.h (memory_breakpoint_from_pc): Declare.
+	* monitor.c (monitor_insert_breakpoint): Use memory_breakpoint_from_pc
+	to determine size of breakpoint instruction.
+	* mips-tdep.c (mips32_decode_reg_save, mips16_decode_reg_save):
+	New helper functions for mips_find_saved_regs.
+	(mips_find_saved_regs): Recognize mips16 prologues.
+	(mips_addr_bits_remove): Strip off upper 32 bits of address
+	when target CPU is 32 bits but CORE_ADDR is 64 bits.
+	(mips_step_skips_delay): No branch delay slot on mips16.
+	(gdb_print_insn_mips): Disassemble mips16 code.
+	(mips_breakpoint_from_pc, mips_about_to_return): New functions.
+
+Mon Jan 27 10:34:03 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* tm-mn10200.h (NUM_REGS): Decrease to 12.
+	(REGISTER_NAMES): Elimination registers not found on the mn10200.
+	(PC_REGNUM, MDR_REGNUM, PSW_REGNUM): Corresponding changes.
+	(LIR_REGNUM, LAR_REGNUM): Delete.  They don't exist on the mn10200.
+
+Sat Jan 25 00:07:59 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dwarf2read.c:  Replace integral tag, name and form fields in
+	internal structure definitions with the corresponding enumeration
+	types from dwarf2.h. Add default cases to switches on enumerations
+	where appropriate.
+	Make quoting of string arguments in complaint messages consistent.
+	Check for NULL returns from DW_STRING.
+	(struct partial_die_info):  Add sibling and has_type fields, remove
+	unused value field.
+	(DW_*):  Move access macro definitions near the definition of the
+	attribute structure.
+	(struct field_info):  New structure to pass information about fields
+	and member functions between die processing routines.
+	(dwarf2_build_psymtabs_hard):  Set cu_header_offset.
+	(scan_partial_symbols):  Do not enter DW_TAG_subprogram dies into
+	the partial symbol table if the DW_AT_*_pc attributes are missing.
+	Add file scope base type definitions to the partial symbol table.
+	Skip over child dies if the die has a sibling attribute.
+	(add_partial_symbol):  Enter global variables with type attributes
+	and without location descriptors into the partial symbol table.
+	Store value of DW_TAG_variable dies in the partial symbol table.
+	Do not enter global variables into the minimal symbol table.
+	Add base type definitions to the partial symbol table.
+	(psymtab_to_symtab_1):  Use dwarf2_get_pc_bounds to determine highpc.
+	(process_die):  Move check for DW_AT_low_pc to read_func_scope.
+	Add a typedef symbol for base type definitions to the symbol table.
+	Ignore DW_TAG_inlined_subroutine tags for now.
+	(read_file_scope):  Use dwarf2_get_pc_bounds to determine pc bounds.
+	(read_func_scope, read_lexical_block_scope):  Use dwarf2_get_pc_bounds
+	to determine pc bounds, ignore dies with invalid bounds.
+	(dwarf2_get_pc_bounds):  New routine to extract and validate the
+	DW_AT_*_pc attributes of a die.
+	(dwarf2_add_field, dwarf2_attach_fields_to_type, skip_member_fn_name,
+	dwarf2_add_member_fn, dwarf2_attach_fn_fields_to_type):
+	New functions to handle fields and member functions.
+	(read_structure_scope):  Rewritten to use them.
+	(read_array_type):  Renamed from dwarf_read_array_type.
+	Default upper array bound to describe an array with unspecified
+	length.
+	Create array types in backwards order, as dwarf2 puts out the array
+	dimensions from left to right.
+	(read_subroutine_type):  Handle DW_TAG_unspecified_parameters,
+	DW_AT_artificial and DW_AT_prototyped.
+	(read_base_type):  Make an unsigned type for DW_ATE_boolean.
+	Pass objfile to dwarf_base_type.
+	(read_partial_die):  Use read_attribute to read in the attributes.
+	Handle DW_AT_sibling and DW_AT_type.
+	Follow references when determining DW_AT_name and DW_AT_external
+	attributes of the die.
+	Validate DW_AT_*_pc attributes.
+	(read_full_die):  Use read_attribute to read in the attributes.
+	(read_attribute):  New function to read an attribute described
+	by an abbreviated attribute.
+	(new_symbol):  Relocate symbol value for DW_TAG_label with baseaddr.
+	Do not set SYMBOL_VALUE_ADDRESS for DW_TAG_subprogram,
+	SYMBOL_BLOCK_VALUE for the symbol will be set later by finish_block.
+	Change symbol class for global variables with a zero valued location
+	descriptor to LOC_UNRESOLVED.
+	Handle DW_AT_const_value attributes for DW_TAG_variable,
+	DW_TAG_formal_parameter and DW_TAG_enumerator.
+	Build a typedef symbol for DW_TAG_base_type.
+	(dwarf2_const_value):  New routine to copy a constant value from an
+	attribute to a symbol.
+	(dwarf_base_type):  Use passed in objfile, not current_objfile
+	when calling dwarf2_fundamental_type.
+	(dump_die):  Use DW_* accessor macros to access values of attributes.
+	(decode_locdesc):  Handle DW_OP_plus_uconst.
+
+Wed Jan 22 01:31:16 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* mn10200-tdep.c: New file.
+	* config/mn10200/tm-mn10200.h: New, REGISTER_SIZE is 24 bits not 32,
+	SP_REGNUM and FP_REGNUM are different, also no lar or lir.
+	* config/mn10200/mn10200.mt: New file.
+	* configure.tgt: add mn10200 entry.
+
+Tue Jan 21 18:32:23 1997  Stu Grossman  (grossman@lisa.cygnus.com)
+
+	* configure.in configure:  Check if host has libdl if doing
+	Solaris threads.
+
+Tue Jan 21 17:03:26 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* mn10300-tdep.c: Wrote/fixed implementations of
+	mn10300_frame_chain, mn10300_init_extra_frame_info,
+	mn10300_frame_saved_pc
+	* config/mn10300/tm-mn10300.h: Redefine INIT_EXTRA_FRAME_INFO
+	and INIT_FRAME_PC macros.
+
+Tue Jan 21 17:01:20 1997  Stu Grossman  (grossman@lisa.cygnus.com)
+
+	* configure.in configure:  Check if host has libm.  Make sure we
+	are using gcc when using the -export-dynamic option.  Fixes a
+	problem with building under Solaris/SunPro cc.
+
+Mon Jan 20 13:52:13 1997  Mark Alexander  <marka@cygnus.com>
+
+	* config/mips/{embed,embed64,embedl,embedl64}.mt:
+	Link in simulator on MIPS embedded targets.
+
+Sat Jan 18 02:31:29 1997  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (frameless_look_for_prologue):  Mark frames
+	with a zero PC as frameless to improve backtraces from core dumps
+	caused by dereferencing a NULL function pointer.
+
+Thu Jan 16 14:10:41 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* config/mn10300/tm-mn10300.h: fix BREAKPOINT definition.
+
+Tue Jan 14 16:01:06 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* mn10300-tdep.c: made a lot more generic, ripping out code
+	from copied target (no more mn10300_scan_prologue,
+	init_extra_frame_info, and mn10300_fix_call_dummy calls)
+	* config/mn10300/tm-mn10300.h: undefine INIT_EXTRA_FRAME_INFO
+	and INIT_FRAME_PC macros
+
+Thu Jan  9 11:44:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* sparc-tdep.c (sparc_frame_find_saved_regs): Don't use 
+	FP_REGISTER_BYTES to compute offsets into the saved frame, 
+	since it fails for SPARC targets configured without any
+	FP regs.  Instead, use DUMMY_STACK_REG_BUF_SIZE.  
+
+Mon Jan  6 11:15:14 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* symtab.c (fixup_symbol_section):  Handle NULL symbols without
+	crashing.
+
+Fri Jan  3 12:08:16 1997  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* Makefile.in configure configure.in:  Remove ENABLE_CLIBS,
+	ENABLE_OBS, and THREAD_DB_OBS.  These are consolidated into LIBS
+	and CONFIG_OBS.
+	* configure configure.in:  Clean up test cases around thread support.
+	* configure.tgt (v850-*-*):  Include v850ice.o and v850.lib if
+	host is Windows.
+	* c-valprint.c ch-valprint.c cp-valprint.c eval.c expprint.c
+	printcmd.c valops.c value.h values.c:  Add bfd_section arg to
+	value_at and value_at_lazy.
+	* coffread.c dbxread.c elfread.c mdebugread.c minsyms.c symtab.h:
+	Add bfd_section arg to prim_record_minimal_symbol_and_info.
+	* corefile.c gdbcore.h printcmd.c valops.c:  Use read_memory_section
+	instead of read_memory.  It takes a bfd_section arg.
+	* coffread.c dbxread.c elfread.c gdb-stabs.h objfiles.h:  Remove
+	unnecessary cast for assignment of struct dbx_symfile_info.
+	Struct objfile now uses a real pointer instead of PTR for this
+	element.
+	* dbxread.c (dbx_symfile_init): Stash bfd section pointers for
+	text, data and bss into dbx_symfile_info.
+	* exec.c (xfer_memory):  Handle transfers for user-specified
+	sections.
+	* findvar.c (read_var_value locate_var_value):  Copy bfd section
+	from the symbol to the value.
+	* gdb-stabs.h:  Add section pointers for text, data and bss
+	sections.
+	* maint.c (translate address command):  Add test code for overlay
+	address translation.
+	* printcmd.c (do_examine do_one_display):  Now takes a bfd section
+	arg.
+	* (print_formatted x_command):  Record current section along with
+	current address for repeated commands.
+	* sparc-nat.c (fetch_inferior_registers):  Change
+	target_xfer_memory to target_{read write}_memory to allow changes
+	to target_xfer_memory interface for section info.
+	* symmisc.c (dump_msymbols print_symbol):  Print section
+	assocaited with symbol.
+	* symtab.c (fixup_symbol_section):  New routine to
+	add section info to symbols returned by lookup_symbol.
+	* symtab.h (struct general_symbol_info):  Add bfd section to
+	symbols.
+	* target.c target.h (target_xfer_memory):  Add bfd section to
+	args.
+	* (target_read_memory_section):  New routine to read data from a
+	specific section.
+	* (target_memory_bfd_section):  New global variable to pass bfd
+	section in to targets.
+	* valarith.c (value_add value_addr value_array):  Preserve bfd
+	section when computing new value.
+	* value.h (struct value):  Add bfd section to values.
+	* values.c (allocate_value value_copy):  Initialize/preserve bfd
+	section.
+	* (unpack_double):  Clean up _MSC_VER conditionals to remove
+	duplicate code.
+	* v850ice.c:  New module to support communication with NEC's
+	PC-based ICE.
+	* config/v850/tm-v850.h (REGISTER_NAMES):  Replace sp, gp, fp, and
+	ep names with rxx names.  sp and fp are renamed via a different
+	mechanism.
+
+Fri Jan  3 14:20:05 1997  Geoffrey Noer  <noer@cygnus.com>
+
+	* mn10300-tdep.c (mn10300_push_arguments): rewrote,
+	also removed code elsewhere that made use of RP_REGNUM.
+	* config/mn10300/tm-mn10300.h: ripped out RP_REGNUM, V0_REGNUM,
+	ARG0_REGNUM, ARGLAST_REGNUM (all not appropriate for mn10300
+	arch.), redefined SAVED_PC_AFTER_CALL, EXTRACT_RETURN_VALUE,
+	EXTRACT_STRUCT_VALUE_ADDRESS, STORE_RETURN_VALUE.
+
+For older changes see ChangeLog-96
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/ChangeLog-98 b/gdb/ChangeLog-98
new file mode 100644
index 0000000..bd19b49
--- /dev/null
+++ b/gdb/ChangeLog-98
@@ -0,0 +1,7122 @@
+Thu Dec 31 15:26:13 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* corelow.c (core_ops): Don't initialize statically.
+	(init_core_ops): New function, fills in core_ops.
+	(_initialize_corelow): Use it.
+
+Thu Dec 31 16:54:30 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by
+	Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+	Edith Epstein  <eepstein@sophia.cygnus.com>
+	David Taylor  <taylor@texas.cygnus.com>
+
+	* config/pa/tm-hppa.h (INSTRUCTION_NULLIFIED): Change to read
+ 	nullify instruction bit from IPSW only when we are not in a system
+ 	call.
+	(STRCAT_REGISTER, pa_do_strcat_registers_info): Additional
+ 	parameter -- precision.
+
+	* Makefile.in (BUILD_TUI): To build the tui, only when configured
+	with --enable-tui.
+	(YLWRAP): Use ylwrap to avoid problems on systems w/o bison.
+	(gdb$(EXEEXT)): Make it dependent on BUILD_TUI.
+	(all-tui): Remove dependency from phony target.
+	(c-exp.tab.c): Use ylwrap instead of bison.
+	(jv-exp.tab.c): Ditto.
+	(f-exp.tab.c): Ditto.
+	(m2-exp.tab.c): Ditto.
+
+	* configure.in (ENABLE_CFLAGS): Define and export BUILD_TUI.
+	
+	* configure: Regenerated.
+
+	* c-typeprint.c (c_type_print_base): Get to the method name by
+	skipping over all the namespaces,  classes and '::'.
+
+	* infcmd.c (run_command): Only call SOLIB_RESTART if it's
+	defined.
+	(detach_command): Ditto.
+
+	* infptrace.c (call_ptrace): Add some debugging code.
+
+	* infrun.c (follow_inferior_fork): Only define on HP.
+	(wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have
+	shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE
+	removed by HP.
+	
+	* Makefile.in (ALLDEPFILES): Add somread.c, hp-psymtab-read.c,
+	hp-symtab-read.c.
+	(SFILES): Remove the above files
+	(COMMON_OBS): Remove somread.o
+	(SFILES): Add the tui files to this, so they get
+	included in etags tables.
+	(all-tui): New rule, which does a recursive make in the tui
+ 	subdir.
+	(gdb$(EXEEXT)): Add tui-all to the list of
+ 	dependencies, and add tui/libtui.a to the link list.
+	(tui/libtui.a): When recursing, pass down
+	${FLAGS_TO_PASS}.  And don't echo the make command.  This is
+	closer to what the other recursions do.
+	(HFILES_NO_SRCDIR) add hpread.h.
+	(COMMON_OBS): Add hp-psymtab-read.o, hp-symtab-read.o
+	Allow the TUI code to be conditionally enabled.
+	(TUI_TARGET, TUI_LIBRARY): New variables, whose values are set by
+	the configuration script.  They're set to the empty string when
+	the TUI isn't enabled.
+	(gdb$(GDBEXT)): Use those, instead of referring to tui-all and
+	tui/libtui.a directly.
+
+	* Makefile.in: Avoid spurious relinking.
+	(gdb$(EXEEXT)): Depend on the actual tui library, not on a
+	fictitious target.  Since the fictitious target never existed, make
+	would always relink.
+	(tui/libtui.a): Renamed from all-tui.  Always recurse to make sure
+	the library is up to date.
+	(TUI_TARGET): Variable removed; there's no need for it any more.
+
+	* Makefile.in: Look for tui include files in the tui source dir.
+
+	* Use automake's `aclocal' program to generate aclocal.m4, to allow
+	us to use automake macros in configure.in with impunity.
+
+	* acconfig.h: Add an entry for the `TUI' symbol.
+
+	* acinclude.m4: New file, containing the code from the old
+	aclocal.m4.  Incorporate (by reference) ../bfd/acinclude.m4, not
+	../bfd/aclocal.m4, since we only want bfd's local macros.
+
+	* aclocal.m4: Now automagically generated.  Just run aclocal!
+	
+	* annotate.c (annotate_catchpoint): New function.
+
+	* annotate.h: Taking the new includes (symtab.h and gdbtypes.h).
+	not taking the ansic C build fix.
+	(annotate_catchpoint): Declare.
+
+	* blockframe.c (blockvector_for_pc_sect): Check that the end of
+ 	the block is >= to the pc, not just >.
+
+	* breakpoint.c (create_temp_exception_breakpoint): #If it out --
+ 	nothing calls it.
+	(bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not
+ 	defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined.
+	(bpstat_get_triggered_catchpoints): If we don't have shared
+ 	library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor
+ 	SOLIB_UNLOADED_LIBRARY_PATHNAME.
+	(watch_command_1): Don't require a run before a watch command
+ 	unless we're on HP [it's an HP OS bug, not a generic limitation]
+	(catch_load_command_1): Don't define if no shared libraries.
+	(catch_command_1): Don't claim to support fork catchpoints unless
+ 	CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support
+ 	vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined,
+ 	don't clain to support shared library load catchpoints if shared
+ 	libraries aren't supported, and don't claim to support exec
+ 	catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined
+
+	(bpstat_do_actions): If we just set cmd to NULL, don't then try to
+ 	set it to cmd->next as we'll SEGV.
+	(bpstat_do_actions): Simplify significantly.  It's
+	now almost as simple as before the merge and it no longer has the
+	HP bug that breakpoint commands are executed repeatedly.
+
+	(break_at_finish_command_1): Rewrite and make sure
+ 	selected_frame points to a frame before using it. Fix string
+ 	termination error.
+	(break_at_finish_at_depth_command_1): Ditto.
+	
+	(can_use_hw_watchpoints): New static variable.
+	(read_memory_nobpt): Test for breakpoint type bp_none.
+	(insert_breakpoints): Test for breakpoint type bp_catch_exec;
+	insure have a current frame before getting the frame address.
+	(remove_breakpoints): Check for breakpoints of types bp_none,
+	bp_catch_fork, bp_catch_vfork, and bp_catch_exec.
+	(bpstat_stop_status): Fix updates of b->hit_count.
+	(bpstat_have_active_hw_watchpoints): New function.
+	(create_exec_event_watchpoint): New function.
+	(watch_command_1): Use can_use_hw_watchpoints.
+	(catch_fork_command_1): Change name of function to call from
+	target_create_catch_(v)fork_hook to create_(v)fork_even_catchpoint.
+	(delete_breakpoint): Test for already deleted breakpoints; add
+	support for bp_catch_fork, bp_catch_vfork, and bp_catch_exec
+	breakpoints.
+	(_initialize_breakpoint): Add can-use-hw-watchpoints to list of
+	user settable debugger variables.
+
+	(clear_command): When there is no argument
+	to the clear command, delete all breakpoints that are hit at 
+	default line. This will include a breakpoint whose line number
+	does not correspond to the default line, but has been set at 
+	the default address.
+
+	(delete_breakpoint): Don't call bpstat_clear_actions, instead
+ 	clear things explicitly; if clearing breakpoint_at, then also
+ 	clear any associated actions so that bpstat_do_actions won't try
+ 	to execute them.
+	(_initialize_breakpoint): Fix function name for bx command.
+
+	(tbreak_command): Remove static from declaration.
+	(maintenance_info_breakpoints): Ditto.
+
+	(reattach_breakpoints): New funct definition, used with with
+ 	hardware watchpoints
+	(breakpoint_1): Change format and add entries to bptypes[]
+	(maintenance_info_breakpoints): Function is no longer static
+
+	(_initialize_breakpoint): Removed a comment.
+	(exception_catchpoints_are_fragile,
+ 	exception_support_initialized): Define.
+	(breakpoint_here_p): Fixed syntax error in conditional
+	(disable_watchpoints_before_interactive_call_start): Fixed call to
+ 	check_duplicates. Need a section parameter.
+	(enable_watchpoints_after_interactive_call_stop): Fixed call to
+ 	check_duplicates. Need a section parameter.
+	(breakpoint_re_set_one): Fixed call to check_duplicates. Need a
+ 	section parameter.
+	(delete_command): Fixed syntax error in conditional
+	(breakpoint_re_set): Fixed some typos.
+	
+	(args_for_catchpoint_enable): New type for handling exceptions.
+	(current_exception_event): New variable for handling exceptions.
+	(insert_breakpoints): Check for additional breakpoint types --
+	bp_catch_throw, bp_catch_catch, call_disabled.  Also, do some
+	additional work to handle an exception catchpoint.
+	(remove_breakpoint): There are additional breakpoint types to
+ 	check for: Bp_catch_throw, bp_catch_catch, call_disabled. Also do
+ 	some additional work to remove the exception catchpoints
+	(breakpoint_init_inferior): New input parameter. If there are
+ 	exception catchpoints delete them.
+	(breakpoint_here_p): There are additional breakpoint enable
+ 	settings to check for: Shlib_disabled, call_disabled
+	(breakpoint_thread_match): There are additional breakpoint enable
+ 	settings to check for: Call_disabled
+	(ep_is_catchpoint): There are additional breakpoint types to check
+ 	for: Bp_catch_throw, bp_catch_catch
+	(ep_is_exception_catchpoint): New function
+	(bpstat_find_step_resume_breakpoint): New function
+	(bpstat_do_actions): Introduce a local copy of the bpstat
+ 	structure.
+	(print_it_normal): There are additional breakpoint types to check
+ 	for: Bp_catch_throw, bp_catch_catch Changeing the control
+ 	structure a bit (adding else ifs) Add code to print out info about
+ 	exceptions.
+	(bpstat_stop_status): There are additional breakpoint enable
+ 	settings to check for: Call_disabled. there are additional
+ 	breakpoint types to chack for: Bp_catch_catch and bp_catch_throw.
+  	Check to see if stopped due to an exception. Minor fixes to the
+ 	catch_errors calls. Make sure to count all encountered
+ 	breakpoints. There was something funky going on previously with
+ 	the counting.
+	(bpstat_what): Add cases for new breakpoint types:
+ 	bp_catch_catch, bp_catch_throw.
+	(bpstat_get_triggered_catchpoints): Check for new breakpoint types
+ 	: Bp_catch_catch, bp _catch_throw.
+	(breakpoint_1): Account for new breakpoint types.
+	(describe_other_breakpoints): Account for new breakpoint enable
+ 	setting (call_disabled)
+	(check_duplicates): Account for new breakpoint enable setting
+ 	(call_disabled)
+	(disable_breakpoints_in_shlibs): New function
+	(disable_watchpoints_before_interactive_call_start): New function
+	(mention): Account for new breakpoint types.
+	(break_command_1): Some additional checking for a valid PC.
+	(watch_command_1): Some dditional checking to prevent a watch
+ 	before a run command.
+	(ep_parse_optional_filename): Simplified for loop.
+	(create_exception_catchpoint): New function
+	(cover_target_enable_exception_callback): New function
+	(handle_gnu_4_16_catch_command): This used to be thcatch_command_1
+ 	function.e
+	(create_temp_exception_breakpoint): New function
+	(catch_command_1): Differs from gdb 4.16 and gdb 4.17. Is now
+ 	calling catch_exception_command_1 using the EX_EVENT_CATCH and
+ 	EX_EVENT_THROW values as parameters.
+	(clear_command): Additional comments
+	(delete_breakpoint): Handle exceptions. Check for additional
+ 	breakpoint enable settings: Shlib_disabled, call_disabled.
+	(delete_command): Hp folks are claiming that we should not delete
+ 	shlib_event breakpoints
+	(breakpoint_re_set_one): Moved call to check_duplicates.  Add new
+ 	breakpoint types to switch statement.
+	(breakpoint_re_set_thread): New function
+	(enable_command): Account for new breakpoint types.
+
+	(insertion_state_t): New enumerated type.
+	(remove_breakpoint): New param in funct prototype.
+	(insert_breakpoints): Check for bp_catch_fork and bp_catch_vfork.
+	(remove_breakpoints): Changed call to remove_breakpoint.
+	(detach_breakpoints): New function.
+	(remove_breakpoint): New parameter, is. Also changed the
+	way b->inserted is set.
+	(ep_is_catchpoint): New function.
+	(ep_is_shlib_catchpoint): New function.
+	(print_it_normal): Check for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec. Also new code 
+	to print out catchpoints properly.
+	(bpstat_stop_status): Check for bp_catch_fork, bp_catch_vfork,
+	and bp_catch_exec. Also, some code to check for catching a 
+	shared library load/unload.
+	(bpstat_what): Added catch_shlib_event to class enumeration.
+	Defined new macro, shlr. Expanded the bpstat_what_main_action
+	table. Add cases for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, and bp_catch_exec.
+	(bpstat_get_triggered_catchpoints): New function.
+	(breakpoint_1): Changes to bptypes definition. Also check for
+	bp_catch_load, bp_catch_unload, bp_catch_fork, bp_catch_vfork,
+	bp_catch_exec. Similar changes to the switch statement.
+	(set_raw_breakpoint): Initialize new breakpoint structure fields.
+	dll_pathname, triggered_dll_pathname, forked_inferior_pid,
+	exec_pathname.
+	(create_solib_load_unload_event_breakpoint): New function.
+	(create_solib_load_event_breakpoint): New function.
+	(create_solib_unload_event_breakpoint): New function.
+	(create_fork_vfork_event_catchpoint): New function.
+	(create_fork_event_catchpoint): New function.
+	(create_vfork_event_catchpoint): New function.
+	(mention): New cases for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(ep_skip_leading_whitespace): New function.
+	(ep_find_event_name_end): New function.
+	(ep_parse_optional_if_clause): New function.
+	(ep_parse_optional_filename): New function.
+	(catch_fork_kind): New enumerated type.
+	(catch_fork_command_1): New function.
+	(catch_exec_command_1): New function.
+	(catch_load_command_1): New function.
+	(catch_unload_command_1): New function.
+	(catch_throw_command_1): New function.
+	(catch_command_1): Now calls catch_throw_command_1.
+	(tcatch_command): New function.
+	(delete_breakpoint): Changed call to remove_breakpoint.
+	Also free the new fields in the breakpoint structure.
+	(breakpoint_re_set_one): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(disable_command): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(enable_command): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(_initialize_breakpoint): Alter add_com call for catchpoints,
+	add add_com call for watchpoints.
+
+	* breakpoint.h (enum bptype): New entries bp_catch_catch,
+ 	bp_catch_throw, and bp_none, bp_catch_load, bp_catch_unload,
+ 	bp_catch_fork, bp_catch_vfork,bp_catch_exec.  Add declarations for
+ 	new functions bpstat_have_active_hw_watchpoints and
+ 	create_exec_event_catchpoint.
+	(tbreak_command): Add prototype.
+	(update_breakpoints_after_exec): Add prototype; update comments.
+	(reattach_breakpoints): New funct prototype declaration.
+	(enable): New enumerated value call_disabled.
+	(bpstat_find_step_resume_breakpoint): New funct decl.
+	(inf_context): New enumerated type.
+	(breakpoint_re_set_thread): New funct decl.
+	(breakpoint_init_inferior): New parameter.
+	(disable_watchpoints_before_interactive_call_start): New funct decl.
+	(enable_watchpoints_after_interactive_call_stop): New funct decl.
+	(disable_breakpoints_in_shlibs): New funct decl.
+  	(struct breakpoint): New fields, dll_pathname,triggered_dll_pathname,
+ 	forked_inferior_pid,exec_pathname BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK.
+	(bpstat_get_triggered_catchpoints): New function.
+	(detach_breakpoints): New function.
+	(create_solib_load_event_breakpoint): New function.
+	(create_solib_unload_event_breakpoint) New function.
+	(create_fork_event_catchpoint): New function.
+	(create_vfork_event_catchpoint): New function.
+	(ep_is_catchpoint): New function.
+	(ep_is_shlib_catchpoint) New function.
+ 	(enum bpstat_what_main_action): New entry.
+
+	* buildsym.c (finish_block): Get rid of processing_hp_compilation;
+ 	handle LOC_INDIRECT case.  Set the BLOCK_GCC_COMPILED to the right
+ 	compiler.
+	(push_context): Add symbols for parameters to the context_stack.
+	(merge_symbol_lists): New function. Merges two symbol lists.
+	(struct context_stack): Add new field param.
+
+	(processing_hp_compilation): New external var.
+
+	* c-exp.y: Use external flag hp_som_som_object_present to decide
+ 	whether code was compiled by HP's compilers.  Add two new C++
+ 	tokens for true and false.
+	(yylex): Check for template name is done differently for the
+ 	HP/aCC compiler case; change some of the template processing code
+ 	for handling HP aCC templates.
+
+	* c-lang.c (c_create_fundamental_type): Added case to handle
+ 	template args.  Handle FT_BOOLEAN type.  Set no sign flag for
+ 	FT_CHAR.
+	(cplus_builtin_types): New structure for c++ builtin types.
+	(cplus_language_defn): Use cplus_builtin_types instead of
+ 	c_builtin_types.
+
+	* c-typeprint.c (c_type_print_base): Don't print 'privete' label
+ 	for a class if all members are private, similarly don't print
+ 	'public' for a struct.  Add support for sized enums (HP/aCC).  get
+ 	rid of the 'static' keyword printed by the demangler for member
+ 	function, when printing the type of a class. 'static' will be
+ 	added by this function.  If the demangled name is null, and the
+ 	method is not stubbed, get the signature by looking at the
+ 	information stored in the symbol structure.  Remove printing of
+ 	'const' and 'volatile' keywords for methods. This is now taken
+ 	care as part of the demangled member names.
+	(cp_type_print_method_args): New function. To print a C++ method
+ 	arguments and name to the output stream.
+
+	(c_type_print_cv_qualifier): New function. Print out "const" and
+ 	"volatile" attributes.
+	(c_type_print_varspec_prefix): Print const or volatile qualifiers.
+	(c_type_print_args): Print 'void' for c++.
+	(c_type_print_varspec_suffix): Print 'void' for a no argument
+ 	function.
+	(c_type_print_base): Print const or volatile qualifiers.  Do not
+ 	print 'unnamed union' if HP aCC compiler used.  Distinguish
+ 	between struct and class based on the DECLARED_TYPE.  Handle
+ 	HP/aCC compiler case for not printing vtable.  Add Template
+ 	support.
+
+	(cp_type_print_derivation_info): Print out 'protected' when
+ 	appropriate. This applies only to HP's compilers, not gcc.
+
+	(c_val_print): Added parameter embedded_offset.  Add
+ 	embedded_offset to valaddr in function calls; fix calls to
+ 	val_print and cp_print_value_fields.  process TYPE_CODE_METHOD as
+ 	well.  moved call to check_typedef out of conditional.  added
+ 	embedded offset param to val_print call.
+
+	(c_value_print): Add new parameter to call to val_print.
+	handle pointer to class case.  Attempt to
+ 	determine the real type of the object to be printed.
+	ensure that const char *, const unsigned char *
+	come out without the type but the volatile variants
+	and the signed variants don't.
+
+	* coff-solib.c (coff_solib_add): Add parameters to call
+	to symbol_file_add.
+
+	* coff-solib.h: (Solib_REMOVE_INFERIOR_HOOK): New macro. defined
+ 	to 0.  functionality not implemented for coff.
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): New macro, generate error message
+ 	for coff.
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): Ditto.
+	(SOLIB_HAVE_LOAD_EVENT): Ditto.
+	(SOLIB_LOADED_LIBRARY_PATHNAME): Ditto.
+	(SOLIB_HAVE_UNLOAD_EVENT): Ditto.
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): Ditto.
+	(SOLIB_IN_DYNAMIC_LINKER): Ditto.
+	(SOLIB_RESTART): Ditto.
+
+	* command.c (find_cmd): New function.  (lookup_cmd_1): Call it,
+ 	change parsing if tui_version or xdb_commands is set.
+  	(_initialize_command): Install new alias if xdb_commands is set.
+
+	* complaints.h: Add ifdef...endif pair at beginning and end of file.
+	
+	* config.in, configure: Regenerated.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Added new files 
+	hp-psymtab-read.o and hp-symtab-read.o.
+	* config/pa/hppahpux.mh (NATDEPFILES): Ditto.
+
+	* config/pa/hppahpux.mh (TERMCAP): Use -lHcurses.
+	* config/pa/hppaosf.mh (NATDEPFILES): Ditto.
+
+	* config/pa/hpux1020.mh (TERMCAP): Use -lHcurses.
+	(MH_CFLAGS): New flag, -D__HP_CURSES, this define
+	is used by HP's linker to find the correct curses library.
+
+	* config/pa/hpux1020.mh: New file.
+
+	* config/pa/hpux1020.mt: New file.
+
+	* config/pa/hpux1100.mh (TERMCAP): Link against -lcurses, not
+	-lHcurses.  The latter does not contain mvwaddstr, wscrl, or
+	wstbwlmkfzz.
+
+	* config/pa/hpux1100.mh (TERMCAP): Use -lHcurses.
+	(MH_CFLAGS): New flag, -D__HP_CURSES, this define
+	is used by HP's linker to find the correct curses library.
+
+	* config/pa/hpux1100.mh (TERMCAP): When hosting on hpux 11.00, use
+	-lHcurses rather than -lcurses.
+
+	* config/pa/hpux1100.mh: New file.
+
+	* config/pa/hpux1100.mt: New file.
+
+	* config/pa/nm-hppah.h (CHILD_HAS_SYSCALL_EVENT): New macro
+	(CHILD_THREAD_ALIVE): New macro
+	(STOPPED_BY_WATCHPOINT): Add a condition to the macro, 
+	! stepped_after_stopped_by_watchpoint
+	(TARGET_ENABLE_HW_WATCHPOINTS): New macro
+	(hppa_enable_hw_watchpoints): New funct decl
+	(TARGET_DISABLE_HW_WATCHPOINTS): New macro
+	( hppa_disable_hw_watchpoints): New funct decl
+	     these are for HP's implementation of fast 
+	watchpoints (via page protection).
+	(target_pid_to_str): New macro, calls hppa_pid_to_str
+	(target_tid_to_str): New macro, calls hppa_tid_to_str
+
+	* config/pa/nm-hppah.h (CHILD_POST_WAIT): Delete;
+	(CHILD_CREATE_CATCH_FORK_HOOK): Replace with
+ 	CHILD_INSERT_FORK_CATCHPOINT and CHILD_REMOVE_FORK_CATCHPOINT.
+	(CHILD_CREATE_CATCH_VFORK_HOOK): Replace with
+ 	CHILD_INSERT_VFORK_CATCHPOINT and CHILD_REMOVE_VFORK_CATCHPOINT.
+	(CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC,
+ 	CHILD_INSERT_EXEC_CATCHPOINT, CHILD_REMOVE_EXEC_CATCHPOINT,
+ 	CHILD_HAS_EXECD, CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL,
+ 	CHILD_POST_ATTACH, TARGET_HAS_HARDWARE_WATCHPOINTS,
+	TARGET_CAN_USE_HARDWARE_WATCHPOINT,
+	TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT,
+	TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT,
+	HAVE_NONSTEPPABLE_WATCHPOINT, target_insert_watchpoint,
+	target_remote_watchpoint): New macros.
+
+	* config/pa/nm-hppah.h (CHILD_XFER_MEMORY): Reinsert accidentally
+	deleted define.
+
+	* config/pa/nm-hppah.h:
+	(PREPARE_TO_PROCEED): Defined macro to use 
+	hppa_prepare_to_proceed.
+	(hppa_pid_to_str): Extern decl.
+	(hppa_tid_to_str): Extern decl.
+	(target_pid_or_tid_to_str): New macro definition.
+	(hppa_pid_or_tid_to_str): Extern decl.
+	(ENSURE_VFORKING_PARENT_REMAINS_STOPPED): New macro - for
+	handling events caused by a call to vfork.
+	(hppa_ensure_vforking_parent_remains_stopped): Extern decl.
+	(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): New macro -
+	for handling events caused by a call to vfork.
+	(hppa_resume_execd_vforking_child_to_get_parent_vfork): Extern decl.
+
+	* config/pa/nm-hppah.h: Fix PREPARE_TO_PROCEED macro.
+
+	* config/pa/nm-hppah.h: Fix for gcc compile on HPUX, change
+ 	PT_RDUAREA to PT_RUAREA.
+
+	* config/pa/nm-hppah.h: Introduced an HPUXHPPA define.
+	A bit of a hack so that I can ifdef some code that 
+	only works for the HP wildebeest debugger.
+
+	* config/pa/nm-hppah.h: Lots of new CHILD_ defines;
+	process_event_kind enum.
+
+	* config/pa/tm-hppa.h (BREAKPOINT32): New define.
+	(CALL_DUMMY_HAS_COMPLETED): New define.
+
+	* config/pa/tm-hppa.h (STACK_ALIGN): New macro.
+	(NO_EXTRA_ALIGNMENT_NEEDED): New macro.
+	(PC_REQUIRES_RUN_BEFORE_USE): New macro. 
+	(REGISTER_NAMES): Formatting in file changed.
+	(CR27_REGNUM): Base register for thread local storage. 
+	(USE_STRUCT_CONVENTION): New macro used to decide whether
+	a function returning a value of type type will
+	put it on the stack or into registers (based on the 
+	PA risc calling conventions).
+	(EXTRACT_RETURN_VALUE): Fixed calculation for extracting return value.
+	(VALUE_RETURNED_FROM_STACK): New macro.
+	(TARGET_READ_PC): Declared the function used in the definition.
+	(SKIP_TRAMPOLINE_CODE): Declared the function used in the definition.
+	(TARGET_WRITE_PC): Declared the function used in the definition.
+	(TARGET_READ_FP): Declared the function used in the definition.
+
+	* config/pa/tm-hppa.h (STRCAT_REGISTER): Define macro for 
+	future use.
+	(pa_do_strcat_registers_info): Moved function decl from
+	defs.h to this HPUX specific .h file.
+
+	* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Type_LENGTH returns
+	bytes, not bits; fix off by 8 error.
+
+	* config/pa/tm-hppa.h: 
+	New comment for obj_unwind_info definition
+	New typedef, obj_private_struct
+
+	* config/pa/tm-hppa.h: Delete most target_ macros -- use default
+	versions instead; remove extraneous comma from proc_wait macro.
+
+	* config/pa/tm-hppa.h: Get rid of macro HP_COMPILED_TARGET.
+
+	* config/pa/tm-hppa.h: Removed redefinitions of 
+	USE_STRUCT_CONVENTION and STACK_ALIGN macros.
+	
+	* config/pa/tm-hppa.h: Some new definitions
+	  New macros: Arg0_REGNUM, ARG1_REGNUM, ARG2_REGNUM, ARG3_REGNUM.
+	    target_pid_to_exec_file, target_acknowledge_forked_child,
+	    target_create_catch_fork_hook, target_create_catch_vfork_hook,
+	    target_has_forked, target_has_vforked, require_attach, 
+	    require_detach, proc_wait
+	  New funct decls: Hppa_pid_to_exec_file,
+	    hppa_acknowledge_forked_child, hppa_create_catch_fork_hook,
+	    hppa_create_catch_vfork_hook, hppa_target_has_forked, 
+	    hppa_target_has_vforked, hppa_require_attach, 
+	    hppa_require_detach, process_wait
+	  (unwind_table_entry): Added comments to describe struct fields.
+
+	* config/pa/tm-hppah.h (somsolib.h): Include it.
+
+	* config/pa/tm-hppah.h: 
+	(CHILD_ENABLE_EXCEPTION_CALLBACK): New define
+	(CHILD_GET_CURRENT_EXCEPTION_EVENT): New define
+
+	* configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
+
+	* configure.in (AC_CHECK_HEADERS): Add check for term.h.
+	
+	* configure.in: Add an --enable-tui argument.
+
+	* configure.in: Construct tui/Makefile from tui/Makefile.in.
+
+	* configure.in: Use AM_PROG_CC_STDC.  If we have the GUI, then we
+	need this to process libgui.h.
+
+	* convex-tdep.c (decout): Change FILE to GDB_FILE.
+
+	* corefile.c: Include objfiles.h, symfile.h.
+	(core_file_command): Attempt to determine the name of the symbol
+	file from the core file.
+	(read_memory_string): New function.
+	
+	* corefile.c (core_file_command): Temporary hack to make non-hpux
+ 	work. For, non-hpux, t->to_core_file_to_sym_file does not have a
+ 	reasonable value. No target_ops vector on the stack gives it a
+ 	non-zero value. fix later.
+
+	* corelow.c (core_file_to_sym_file): Added new local variable,
+ 	failing command, and do some explicit type castings.
+	(core_ops): Add three new fields: to_has_syscall_event,
+	to_enable_exception_callback, to_get_current_exception_event.
+ 	Necessary since we still have oldstyle initialization in
+	this file
+
+	* corelow.c: Include unistd.h
+	(core_file_to_sym_file): New function 
+	(core_file_thread_alive): New function
+	(core_ops): Added new target ops vector fields. see below. And
+	  yes we definitiely need to initialize them here, as long as
+	  we're using static initialization.
+
+	* cxux-nat.c (add_shared_symbol_files): Additonal params for calls
+ 	to symbol_file_add.
+
+	* defs.h (gdb_file_isatty): New function decl.
+
+	* defs.h (GDB_FILE): If TUI is defined, define a structure rather
+ 	than making this an alias for FILE.
+	(gdb_stdout, gdb_stderr): If TUI is defined, then define these
+	as pointers to variables of type GDB_FILE rather than making them
+	be aliases for stdout and stderr.
+
+	* defs.h (TUIDO): Add definition conditionalized on definition
+	(or lack thereof) of TUI.
+
+	* defs.h (command_class): Add two additional values.
+	(precision_type): New enum.
+
+	* defs.h (gdb_fclose): Add declaration.
+
+	* defs.h (store_address): Change prototype to match function.
+
+	* defs.h (tui_version, xdb_commands, dbx_commands): Add decl's.
+
+	* defs.h (gdb_file_deallocate): New function declaration
+
+	* defs.h: 
+	(streamtype): New enumerated type to distinguish between
+	output to a FILE and output to a buffer.
+	(tui_stream): New struct type, named GDB_FILE. Contains,
+	 streamtype, FILE, buffer, and bufferlength fields.
+	(gdb_stdout): Of type GDB_FILE, will pass this around gdb
+	rather than stdout.
+	(gdb_stderr): Of type GDB_FILE, will pass this around gdb
+	rather than stderr.
+	(fputs_unfiltered_hook): Change stream parameter from FILE to
+	GDB_FILE
+	(flush_hook): Change stream parameter from FILE to GDB_FILE
+	(gdb_fclose): Fix declaration for gdb_fclose; parameter is now of 
+	type GDB_FILE **
+	(gdb_file_adjust_strbuf): New function declaration. function lives in
+	utils.c.
+	(gdb_file_init_astring): New function declaration. function lives
+	in utils.c
+	(gdb_file_get_strbuf): New function declaration. function lives
+	in utils.c
+	
+	* defs.h: Additional include files included when TUI is defined.
+
+	* defs.h: Funct decl source_full_path_of.
+
+	* demangle.c: Add HP_DEMANGLING_STYLE_STRING.
+
+	* demangle.c: Added new demangling style, EDG_DEMANGLING_STYLE_STRING,
+	  to the demanglers structure. This is for support of 
+	  Kuck & Assoc.'s changes for demangling.
+
+	* eval.c (evaluate_subexp_standard): C++ member function changes.
+
+	* eval.c (evaluate_subexp_standard): Verify TYPE_TARGET_TYPE is
+	non NULL before dereferencing it.
+
+	* eval.c (evaluate_subexp_standard): With HP/aCC compiler it is not possible
+	to perform inferior calls via function pointers.
+	Resolve calls to overloaded functions using find_overload_match.
+	We cannot handle HP/aCC pointers to member functions.
+	Deal with HP/aCC pointers to members in various kind of expressions.
+
+	* f-lang.c (f_printchar): Change FILE to GDB_FILE.
+	(f_printstr): Ditto.
+	(emit_char): Ditto.
+
+	* f-lang.c (f_printstr): Change stdout to gdb_stdout.
+	
+	* f-typeprint.c (f_print_type): Change FILE to GDB_FILE.
+	(f_type_print_varspec_prefix): Ditto.
+	(f_type_print_args): Ditto.
+	(f_type_print_varspec_suffix): Ditto.
+	(print_equivalent_f77_float_type): Ditto.
+	(f_type_print_base): Ditto.
+
+	* findvar.c (): Hp snapshot 3 changes.  (extract_address): Coerce
+	return value from extract_unsigned_integer to CORE_ADDR.
+	(store_address): Change val from CORE_ADDR to LONGEST; changes to
+	support machines where CORE_ADDR and LONGEST are different sizes.
+	(get_saved_register): Coerce arg to store_address to LONGEST.
+	(read_relative_register_raw_bytes): Cast last arg to
+	store_address to LONGEST.  (read_register): Cast return from
+	extract_address to a CORE_ADDR.  (write_register_pid): Change val
+	from LONGEST to CORE_ADDR.  (read_pc_pid): Save and restore
+	inferior_pid if necessary.  (write_pc_pid): Ditto.
+	(read_var_value): Cast arg to store_address.
+
+	* findvar.c (read_relative_register_raw_bytes_for_frame): New
+	function.
+	(read_relative_register_raw_bytes): Call it.
+
+	* findvar.c (symbol_read_needs_frame): Handle LOC_THREAD_LOCAL_STATIC and
+	LOC_INDIRECT.
+
+	* fork-child.c (fork_inferior): Chenge fifth parameter to be a
+	function returning void.
+
+	* fork-child.c (fork_inferior): Delete unused variable f.
+	
+	* fork-child.c: 
+	(Startup_WITH_SHELL): New macro -- interim fix for a bug
+	(breakup_args): New function -- breaks up an argument string into
+	  an argument suitable for passing into execvp().
+	(fork_inferior): Handling problems with starting up gdb with a shell.
+	  -- again, this appears to be an interim fix.
+
+	* fork-child.c: 
+	(fork_inferior): Added a comment
+	(clone_and_follow_inferior): New function. 
+	(startup_inferior): Minor formatting changes.
+	
+	* fork-child.c: 
+	(fork_inferior): Hp change is problematic. The -f option has 
+	different meanings for different shells. It is particularly 
+	inappropriate for bourne shells.
+
+	* fork-child.c: 
+	(fork_inferior): Added new parameter, pre_trace_fun.
+	pre_trace_fun is a function pointer. For some targets,
+	like HPUX, this function gets called to prepare for forking
+	a child.
+
+	* fork-child.c: 
+	(fork_inferior): Fixed call to init_trace_fun
+
+	* fork-child.c: 
+	Moved definition of STARTUP_WITH_SHELL to inferior.h
+	Added a DEBUGGING macro. Currently set to 0. May remove
+	later.
+	breakup_args: Add DEBUGGING ifdefs. more sophisticated 
+	parsing to break up args.
+	(fork_inferior): Rename kshell variable to shell. new local
+	variable, tryname. Make use of STARTUP_WITH_SHELL macro. 
+	More error processing if starting up with a shell.
+	(startup_inferior): Distinguish between starting up with a shell 
+	and not doing so. 
+
+	* gdbthread.h: 
+	Declarations for load_infrun_state and save_infrun_state take
+	an additional parameter.
+
+	* gdbthread.h: Note that sometime between gdb 4.16 and 4.17,
+	    thread.h was renamed gdbthread.h
+	  (load_infrun_state): Additional parameters
+	  (store_infrun_state): Additional parameters
+	
+	* gdbthread.h: Include breakpoint.h
+	
+	* hp-psymtab-read.c (QUICK_LOOK_UP): Redefine to be 0.
+	(hpread_build_psymtabs): Deal with enums.
+	(hpread_start_psymtab): Include section offset.
+	(hpread_end_psymtab): Take care of offset.
+	
+	* hp-psymtab-read.c (TRUE): Define.
+	(FALSE): Define.
+	(file_exists): New function. Checks for existance of file.
+	(hpread_pxdb_needed): Rewrite.
+	(hpread_quick_traverse): Use correct demangling style.
+	Handle F77 case.
+	(hpread_get_header): Rewrite.
+	(hpread_get_textlow): Add support for DOC_FUNCTION.
+	(hpread_build_psymtabs): Make sure we do the right thing
+	for pxdb and F77.
+
+	* hp-psymtab-read.c (hpread_pxdb_check): Change parenthesis positions.
+
+	* hp-psymtab-read.c (hpread_quick_traverse): Compare CORE_ADDR
+	variable end_addr to 0 instaed of NULL to get rif of gcc warning.
+
+	* hp-psymtab-read.c: 
+	(Hpread_get_textlow): Added param to function 
+	Defined convennience macros and some datatypes and variables for 
+	processing the quick lookup-tables. Looks like the code existed
+	before, but has been munged.
+	(hpread_pxdb_needed): Major rearrangements of code. Additional local
+	variables. Also, more extensive checking for various scenarios:
+	debug info for optimized code vs. unoptimized code, pxdb has been
+ 	run vs. pxdb has not been run.
+	(VALID_FILE): New macro
+	(VALID_MODULE): New macro
+	(VALID_PROC): New macro
+	(VALID_CLASS): New macro
+	(FILE_START): New macro
+	(MODULE_START): New macro
+	(PROC_START): New macro
+	(FILE_END): New macro
+	(MODULE_END): New macro
+	(PROC_END): New macro
+	(FILE_ISYM): New macro
+	(MODULE_ISYM): New macro
+	(PROC_ISYM): New macro
+	(VALID_CURR_FILE): New macro
+	(VALID_CURR_MODULE): New macro
+	(VALID_CURR_PROC): New macro
+	(VALID_CURR_CLASS): New macro
+	(CURR_FILE_START): New macro
+	(CURR_MODULE_START): New macro
+	(CURR_PROC_END): New macro
+	(CURR_FILE_ISYM): New macro
+	(CURR_MODULE_ISYM): New macro
+	(CURR_PROC_ISYM): New macro
+	(TELL_OBJFILE): New macro
+	(pst_syms_struct): New typedef to keep track of the start/end symbol
+	table (LNTT) indices of psymtabs created so far.
+	(pst_syms_count): New variable
+	(pst_syms_size): New variable
+	(told_objfile): New variable 
+	(init_pst_syms): New function. sets up psymtab symbol index stuff.
+	(clear_pst_syms): New function. clean up psymtab symbol index stuff.
+	(record_pst_syms): New function. add info about newest psymtab to symbol 
+	index table.
+	(find_next_pst_start): New function. Find a suitable symbol table index.
+	(find_next_file_isym): New function
+	(find_next_proc_isym): New function
+	(find_next_module_isym): New function
+	(scan_procs): New function. Scan and record partial symbols for all 
+	functions starting from specified index and in a specified code range.
+	(hpread_quick_traverse: Major rearrangement of code. The function
+	now uses all the nifty macros. There are some new local variables.
+	Check for EDG_DEMANGLING style. ifdef out some code for handling F77.
+	Previously, the function looped over all the modules in the table.
+	Now, the function loops over all the files, modules, and procedures.
+	With HP aCC and CTTI, it is possible for a compiled object to have a 
+	file and no module.
+	(hpread_build_psymtabs): Added a section of code ifdefed by 
+	QUICK_LOOK_UP. It check to see whether or not there are any globals 
+	in the executable. Fix number of params to hpread_start_psymtab call.
+	Some changes to the way DNTT_TYPE_MODULE is handled.
+	(hpread_get_textlow): Change in signature, minor code changes. The 
+	function finds the low address associated with a specified symbol.
+	In looking for the address for the symbol avoid going of the end of
+	the LNTT file.
+
+	* hp-psymtab-read.c: Change TRUE to 1 and FALSE to 0. Do some
+ 	reformatting.
+
+	* hp-psymtab-read.c: Include demangle.h
+	(trans_lang): New function to let gdb know the correct language.
+	(hpread_quick_traverse): Use ARM style demangling.
+	Demangle procedures names. 
+	Use gdb language names instead of hp language names.
+	Add symbol to list using its demangled name.
+
+	* hp-psymtab-read.c: New file.
+	(hpread_call_pxdb): New function. Call PXDB to process our file.
+	(hpread_pxdb_check): New function. Return TRUE if the file needs 
+	pre-processing by PXDB and we have thus called PXDB to do this 
+	processing and the file needs to be re-loaded.
+	(hpread_quick_traverse): New function. Traverse the quick look-up 
+	tables, building a set of psymtabs.
+	(hpread_get_header): New function. Get appropriate header from obj
+	file, based on pxdb type
+	(hpread_symfile_init): No change from hpread.c
+	(hpread_build_psymtabs): If there are quick lookup tables, read those,
+ 	then scan the global section LNTT. Otherwise, just scan the whole LNTT.
+	Changed: Add a global function entry to the global partial symbol list.
+	Handle end of symbols, for QLT case.
+	In case of TAGDEF, if it is a class or a template, add the name to the
+	var_namespace, so that it is known as a type by gdb.
+	In case of CONSTANT, and it is global, add it to the globals.
+	(hpread_symfile_finish): No change from hpread.c
+	(hpread_get_lntt): Make it not static
+	(hpread_get_gntt): No change from hpread.c
+	(hpread_get_slt): Make it not static
+	(hpread_get_textlow): No change from hpread.c
+	(hpread_start_psymtab): No change from hpread.c
+	(hpread_end_psymtab): No change from hpread.c
+
+	* hp-symtab-read.c (hpread_get_scope_start): Renamed. It was
+	hpread_get_depth.
+	(hpread_type_translate): Distinguish between signed and unsigned char
+	types.
+	(hpread_psymtab_to_symtab): Set flag for hp compilation.
+	(hpread_read_function_type): Append symbols for parameters to local 
+	list as well as	to the global list. Get the parameters types from the
+	local list instead of the global list.
+	(hpread_read_struct_type): Add new field num_fn_fields to next_fn_field
+	structure. Rewrite handling of templates
+	(hpread_type_lookup): Change handling of dntt_type_modifier.
+	(hpread_process_one_debug_symbol): Call hpread_get_scope_start instea
+	of hpread_get_depth. Handle enum as well.
+	(hpread_get_scope_depth): New function. Get nesting depth for a 
+	DNTT entry.
+
+	* hp-symtab-read.c (hpread_psymtab_to_symtab): Set 
+	processing_gcc_compilation to 0.
+	
+	* hp-symtab-read.c (hpread_psymtab_to_symtab_1): Change stdout to
+ 	gdb_stdout; change fflush to gdb_flush.
+	(hpread_psymtab_to_symtab): Change fflush to gdb_flush.
+
+	* hp-symtab-read.c (hpread_read_enum_type): Declare variable.
+	(hpread_read_struct_type): Eliminate references 
+	to 'args' member of fn_field.
+
+	* hp-symtab-read.c (hpread_read_struct_type): A static member
+	is now indicated by the bitsize field, not the bitpos.
+	Initialize physname to empty.
+	(fix_static_member_physnames): Use new macros to deal with
+	physnames.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Change references
+	to bitpos member of struct field to use the FIELD_BITPOS macro.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Comment out reference to
+	obsolete field fn_field.args.
+	Add struct complaint definitions for complaints.
+	(hpread_read_struct_type): Change call to complain.
+	(hpread_read_array_type): Change call to complain. 
+	(hpread_type_lookup): Change call to complain.
+	(hpread_process_one_debug_symbol): Change calls to complain.
+	(hpread_type_translate): Change calls to complain.
+	
+	* hp-symtab-read.c (hpread_read_struct_type): Make sure bitvector
+	has been allocated before calling has_vtable.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Revert change, 
+	just check for vtable without checking for bitvectors too.
+
+	* hp-symtab-read.c: 
+	(Hpread_expand_symtab): Change name of local variable from
+	at_end_of_module to at_module_boundary. 
+	Also, if demangling style is already EDG, do not reset it 
+	to the HP demangling style.
+	Change at_end_of_module param to hpread_process_one_debug_symbol
+	call to at_module_boundary.
+	No longer break out of loop when reach end of module. With CTTI,
+	the compiler can generate function symbols which are not in 
+	any module. Typically they show up after the end of one
+	module and before the start of the next module.
+	(hpread_read_struct_type): Check that the debug info for 
+	a TEMPLATE_ARG is correct.
+	(hpread_process_one_debug_symbol): Change name of at_end_of_module_p
+	param to at_module_boundary_p. 
+	Also set *at_module_boundary_p = -1 if missing a module end and set 
+	it to 1 when finished expanding the debug info.
+	Handle TLS variable.
+
+	* hp-symtab-read.c: Include defs.h, symtab.h, gdbtypes.h, complaints.h.
+	(fixup_class): New static variable.
+	(fixup_method): New static variable.
+	(hpread_get_location): Rewrite.
+	(hpread_has_name): Add cases for DNTT_TYPE_DOC_FUNCTION and 
+	DNTT_TYPE_DOC_MEMFUNC
+	(hpread_expand_symtab): Use HP demangling style. 
+	Set hp_som_som_object_present to 1.
+	(hpread_type_translate): Error out if not immediate. Issue warning
+	if there is an unhandled type code.
+	(error_in_hpread_type_translate_complaint): Remove this structure.
+	(hpread_read_enum_type): Don't assume size of enum is always 4 bytes.
+	(hpread_read_function_type): Add new parameter to indicate a new block.
+	Do not add the parameters to the symbol list.
+	If the type was read in earlier, do not modify the type structure.
+	If we are creating a new block, set the local symbol list to be the
+	param list.
+	Need to mark this type as preprocessed.
+	(hpread_read_doc_function_type): New function. Read and internalize 
+	a native DOC function debug symbol.
+	(hpread_read_struct_type): A method can be of type doc_function and
+	doc_memfunc too.
+	Handle case in which a method is read before its class. Deal with 
+	incomplete method types.
+	Handle cases in which HP/aCC compiler creates operator names w/o
+	the 'operator' keyword. Rewrite the loop over the fileds.
+	(fix_static_member_physnames): New function. Adjust the physnames for 
+	each static member.
+	(fixup_class_method_type): New function. Fix-up the type structure for a 
+	class.
+	(hpread_read_array_type): Change complaint to warning.
+	(hpread_type_lookup): Add case for DNTT_TYPE_DOC_FUNCTION.
+	For structures/classes set static member to point to strings with full
+	names.
+	Change calls to hpread_read_function_type to pass extra parameter.
+	(hpread_record_lines): Handle case for SLT_NORMAL_OFFSET.
+	(class_of): New function. Given a function "f" which is a member of a class,
+ 	find the classname that it is a member of.
+	(hpread_process_one_debug_symbol): Deal with possible alias field from the
+	som record for the Function or Entry type.
+	Do the demangling ourselves if the gdb demangler failed.
+	Add support for DOC functions.
+	For function types, add parameters to local list.
+	(hpread_get_scope_depth): Make this function a no-op.
+	(hpread_adjust_bitoffsets): New function. Adjust the bitoffsets for all 
+	fields of an anonymous union.
+	(hpread_get_next_skip_over_anon_unions): New function. Skip over anonymous 
+	unions.
+
+	* hp-symtab-read.c: Include demangle.h
+	(hpread_expand_symtab): Ensure we are using ARM-style demangling.
+	(hpread_process_one_debug_symbol): Set the mangled and demangled 
+	names for functions.
+	Record the class name to generate the demangled names of member 
+	functions.
+
+	* hp-symtab-read.c: New file.
+	(hpread_get_depth): No change from hpread.c
+	(hpread_get_line): No change from hpread.c
+	(hpread_get_location): No change from hpread.c
+	(hpread_has_name): Make it not static. Return 1 for DNTT_TYPE_BLOCKDATA
+	and DNTT_TYPE_MEMFUNC. Return 0 for CLASS_SCOPE, REFERENCE,PTRMEM,
+ 	PTRMEMFUNC, CLASS, GENFIELD, VFUNC, MEMACCESS, INHERITANCE, 
+	FRIEND_CLASS, FRIEND_FUNC, MODIFIER, OBJECT_ID, TEMPLATE, TEMPLATE_ARG,
+ 	FUNC_TEMPLATE, LINK.
+	(hpread_psymtab_to_symtab_1): No changes from hpread.c
+	(hpread_psymtab_to_symtab): Make it a static function
+	(hpread_expand_symtab): Modified
+	(hpread_type_translate): If not typep.dntti.immediate do not abort, 
+	but complain and return. Same for default action. Handle more HP_TYPEs.
+	(hpread_lookup_type): Initially allocate a correct-size type-vector.
+	(hpread_alloc_type): Reset type_addr only if a type was allocated.
+	(hpread_read_enum_type): If this has already a type associated, return.
+	(hpread_read_function_type): Do different things depending on whether 
+	function is a MEMFUNC, a TEMPLATE, a FUNCTION som record.
+	Do not use the LOC_REGPARM_ADDR symbol class.
+	(hpread_read_struct_type): Handle classes and templates too. Major 
+	rewrite.
+	(hpread_get_nth_template_arg): New function. 
+	(hpread_read_templ_arg_type): New function.
+	(hpread_read_set_type): No change from hpread.c
+	(hpread_read_array_type): Modified
+	(hpread_read_subrange_type): Add handling of more DNTT entries.
+	added support for templates, classes, references, virtual functions.
+	(hpread_type_lookup): Handle DNNT_TYPE_MODULE.
+	(hpread_record_lines): No changes from hpread.c
+	(hpread_process_one_debug_symbol): Handle WITH, COMMON, 
+	CLASS_SCOPE. Expand TAGDEF case to handle classes and templates.
+
+	* hppa-tdep.c (pa_do_strcat_registers_info): Has a new parameter,
+ 	precision, which is passed into the call to pa_strcat_fp_reg to
+ 	indicate whether to display the floating point registers using
+ 	single or double preceision.
+	(pa_strcat_registers): Introduce local variable, precision, and 
+	pass it into call to pa_strcat_fp_reg.
+	(pa_strcat_fp_reg): Modified function. New parameter, precision,
+	used by function to decide whether to use single or double
+	precision. Also added the code to put a double precision value
+	into a buffer.
+
+	* hppa-tdep.c: Add'l includes <machine/save_state.h>,
+ 	<unistd.h>, declare pa_register_look_aside, define is_pa_2.
+	(rp_saved): Check for where to read the return pointer from.
+	(pa_do_registers_info): Handle is_pa_2. (pa_register_look_aside):
+ 	new function. (pa_print_registers): Handle is_pa_2.
+  	(in_solib_call_trampoline): Handle a compiler/linker error.
+	(skip_trampoline_code): Changes to some masks used in examining
+	instructions.  (inst_saves_fr): Test for FSTWS instruction.
+	(skip_prologue): Renamed to skip_prologue_hard_way.
+	(after_prologue): New function.  (skip_prologue): New function.
+
+	* hppa-tdep.c (after_prologue): If f is NULL, don't dereference
+	it.
+
+	* hppa-tdep.c (after_prologue): If no debug info, return zero
+	telling caller that we need to find the end of the prologue via
+	the hard way (instruction examination).
+
+	* hppa-tdep.c (find_unwind_entry): Avoid dereferencing a null
+	pointer.
+
+	* hppa-tdep.c (hppa_pid_to_exec_file): Deleted -- no longer used.
+
+	* hppa-tdep.c (hppa_prepare_to_proceeed): Add prototype.
+	(read_unwind_info): Purecov comments, bug fixes.
+	(find_unwind_entry): Purecov comments, bug fixes.
+	(find_stub_with_shl_get): Purecov comments.
+	(frame_chain): Additional parens.
+	(hppa_push_arguments): Changes to commented out version of routine.
+	(hppa_fix_call_dummy): Purecov comments, fix location of end.o.
+	(in_solib_call_trampoline): Purecov comments.
+	(in_solib_return_trampoline): Purecov comments.
+	(setup_d_pid_in_inferior): Fix location of end.o.
+	(initialize_hp_cxx_exception_support): Fix location of end.o.
+	(child_enable_exception_callback): Purecov comments.
+
+	* hppa-tdep.c: 
+	(Pa_do_strcat_registers_info): New routine. called by 
+	tui/tuiRegs.c:_tuiRegisterFormat to place a register name 
+	and value into a string buffer. Interface may change in
+	future. Checking this in so that we have something 
+	functional for HP.
+	(pa_strcat_registers): New routine, called by 
+	pa_do_strcat_registers_info. Does same thing as 
+	pa_print_registers except it takes a stream parameter. 
+	This routine should disappear in future. Checking in
+	so that we have something functional to give HP
+	(pa_strcat_fp_reg): New routine, called by 
+	pa_do_strcat_registers_info and pa_strvat_registers
+	to place a floating point register name and value into
+	a buffer. This interface may change in future. 
+	Checking in so that we have something functional to give HP.
+
+	* hppa-tdep.c: (Pa_print_fp_reg): Change prototype to match def'n.
+	(pa_register_look_aside): Fix comment immediately before function.
+
+	* hppa-tdep.c: Changes to better support stack unwinding, 
+	    reading and writing registers for HPUX. The HP folks had
+	    an advantage ... access to a runtime architecture spec ;-}.
+	  New includes: Ptrace.h
+	  (internalize_unwinds): Initialize new fields in table.
+	  (read_unwind_info): Entries in the table are now more complex
+	    structures. References of the form ...->table[index].stub_type
+	    are now ...->table[index].stub_unwind.stub_type.
+	  (find_proc_framesize): Added a check for pc == 0.
+	  (rp_saved): Entries in the table are now more complex
+	    structures. References of the form ...->table[index].stub_type
+	    are now ...->table[index].stub_unwind.stub_type.
+	  (frameless_function_invocation): Stub_type becomes
+ 	    stub_unwind.stub_type
+	  (saved_pc_after_call): Stub_type becomes stub_unwind.stub_type
+	  (hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type
+	  (frame_chain_valid): Stub_type becomes stub_unwind.stub_type
+	  (hppa_call_dummy): Stub_type becomes stub_unwind.stub_type
+	  (pa_print_fp_reg): Additional params to call val_print
+	  (in_solib_call_trampoline): Stub_type becomes stub_unwind.stub_type
+	  (in_solib_return_trampoline): Stub_type becomes stub_unwind.stub_typ
+	  (skip_trampoline_code): Additional code to handle external
+	     dyncalls. Also stub_type becomes stub_unwind.stub_type
+	  (hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there
+	     is an explicit ptrace request for getting the pathname associated
+	     with a process id (pid).
+	
+	* hppa-tdep.c: Fix for gcc compile on HPUX
+	  (hppa_pid_to_exec_file): Remove unwanted param from 
+	     call to call_ptrace. Note, hppa_pid_to_exec_file goes
+	     away in subsequent hp snapshots.
+
+	* hppa-tdep.c: Include bfd.h.
+	include dl.h
+	(args_for_find_stub): New structure.
+	(find_unwind_entry): Deal with null input pc value.
+	(rp_saved): Ditto.
+	For the import stub, return -24 always.
+	(hppa_frame_saved_pc): Save old pc value, to detect we are in a loop.
+	(init_extra_frame_info): Use TARGET_READ_FP.
+	(frame_chain): Include thread support.
+	If the caller's pc is zero, we loose and return, just like stack bottom.
+	Disable warning about being unable to find unwind info.
+	(hppa_push_arguments): Rewrite.
+	(hppa_value_returned_from_stack): New function. Handles returning a value
+	larger that 64 bits, stored on the stack.
+	(find_stub_with_shl_get): New function. To look up symbols in shlibs.
+	(cover_find_stub_with_shl_get): New function. Cover routine for 
+	find_stub_with_shl_get to pass to catch_errors.
+	(hppa_fix_call_dummy): Comment out old stub mechanism. Rewrite using dyncall.
+	(target_read_fp): New function.
+	(pa_do_registers_info): Floating point registers start at FP4.
+	(pa_print_registers): Use FP4_REGNUM instead of 72.
+	(skip_trampoline_code): Do machine instruction matching for PA2.0.
+	(setup_d_pid_in_inferior): New function. Exception handling support.
+	(initialize_hp_cxx_exception_support): Ditto.
+	(child_enable_exception_callback): Ditto.
+	(child_get_current_exception_event): Ditto.
+
+	* hppah-nat.c (child_post_wait, child_post_follow_vfork,
+ 	child_post_follow_inferior_by_clone): New functions.
+
+	* hppah-nat.c (child_xfer_memory): Make sure the call to ptrace really
+	fails before we give up.
+	(hppa_pid_to_str): New function. Format a process id.
+	(hppa_tid_to_str): New function. Format a thread id. 
+
+	* hppah-nat.c (child_xfer_memory): Use xmalloc, not alloca.
+	(child_post_wait): Delete.
+	(child_post_follow_vfork): Delete decl of child_ops; delete
+	large chunks of function -- let it be handled by the normal
+	mechanism that notices and handles exec events, in resume().
+
+	* hppah-nat.c (require_notification_of_exec_events): New function;
+	just notify of exec events, not all events, and just the specified
+	pid, don't include it's children (10.20 version).
+	(child_acknowledge_created_inferior): Call new function
+	require_notification_of_exec_events instead of
+	require_notification_of_events.
+	
+	* hppah-nat.c [!GDB_NATIVE_HPUX_11]: Move HPUX 10.x-specific
+ 	support code here from infptrace.c.
+
+	* hppah-nat.c: Removed #define ptrace call_ptrace
+	replaced all calls to ptrace with calls to call_ptrace
+	(parent_attach_all): Removed call to ptrace
+
+	* hpread.c (hpread_psymtab_to_symtab_1): Change fflush to
+	gdb_flush; change stdout to gdb_stdout.
+	(hpread_psymtab_to_symtab): Change fflush to gdb_flush.
+	
+	* hpread.h: New file. Includes all includes, struct defs, defines
+ 	from hpread.c. 
+
+	* infcmd.c 
+	(attach_command): New local variable, exec_file, added code to
+ 	  determine exec_file from pid if exec_file is not already known,
+	  call new target operation, target_post_attach -- a no-op unless
+	  on HPUXHPPA
+	(detach_command): After detaching, do a SOLIB_RESTART
+
+	* infcmd.c (objfiles.h): Fix typo on include line.
+
+	* infcmd.c (run_command): Only call SOLIB_RESTART if it's
+	defined.
+	(detach_command): Ditto.
+
+	* infcmd.c: 
+	(run_stack_dummy): Add calls to 
+	disable_watchpoints_before_interactive_call_start and
+	enable_watchpoints_after_interactive_call_stops
+	(finish_command): Alter code handling the evaluation and printing
+	of the target function's return value.
+	(attach_command): When given a pid, but no exec file, try to determine
+	the exec file from the process. If the process does not record a 
+	full path name, try to qualify the filename against the source path.
+	(_initialize_infcmd): Add some verbiage about how to use the attach command
+
+	* infcmd.c: 
+	Include objfiles.h
+	(run_command): If program has already been started, and decide
+	to restart it, then kill the target, flush the caches, 
+	call init_wait_for_inferior. Also purge old solib objfiles.
+
+	* infcmd.c: Changed calls to val_print, using a new macro,
+	  SOLIB_RESTART
+	  (run_command): Calls SOLIB_RESTART
+	  (do_registers_info): Changed calls to val_print
+
+	* infcmd.c: Made the symfile.h include preceed the 
+	objfiles.h include. The other ordering caused a 
+	compile problem (incompletely defined types).
+
+	* inferior.h (REQUIRE_DETACH): Fix default definition.
+	* inftarg.c (child_post_attach): Fix declaration, make static.
+	(proc_wait): Make globally visible.
+	(child_insert_fork_catchpoint, etc): Fix return type.
+
+	* inferior.h (STARTUP_WITH_SHELL): New define.
+	(START_INFERIOR_TRAPS_EXPECTED): New define
+
+	* inferior.h (fork_inferior): Change fifth parameter to be a function 
+	returning void. 
+
+	* inferior.h (proc_wait): Declare.
+
+	* inferior.h: 
+	  (Require_ATTACH): New macro
+	  (REQUIRE_DETACH): New macro
+	  (detach): Definition is now an extern
+	  (clone_and_follow_inferior): New definition, it's also an extern
+
+	* inferior.h: 
+	  (Require_attach): Default definition for require_attach funct
+	  (require_detach): Default definition for require_detach funct
+	  (pre_fork_inferior): New funct decl for function defined in
+	   infptrace.c
+	  (fork_inferior): New parameter in funct decl.
+
+	* inferior.h: 
+	  New variable decls: Inferior_ignoring_startup_exec_events,
+	    inferior_ignoring_leading_exec_events -- these variables 
+	    are used when processing an exec call.
+	  (CALL_DUMMY_HAS_COMPLETED): New default macro -- for targets
+	    where PC in call dummy implies that call dummy has 
+	    completed. Note, that on HPUX this inference does not hold.
+
+	* infptrace.c
+	  (require_notification_of_events): New function
+	  (child_acknowledge_created_inferior): Previously named
+	     hppa_acknowledge_forked_child. Also calling 
+ 	     require_notification_of_events and clearing some semaphore 
+	     variables
+	  (child_post_startup_inferior): New function
+	  (child_create_catch_fork_hook): Previously named
+	     hppa_create_catch_fork_hook
+	  (child_create_catch_vfork_hook): Previously named
+	     hppa_create_catch_vfork_hook 
+	  (child_has_forked): Previously named hppa_target_has_forked
+	  (child_has_vforked): Previously named hppa_target_has_vforked
+	  (process_wait): Changed to call target_post_wait
+	  (attach): Add call to require_notification_of_events
+	  (child_pid_to_exec_file): New function
+	  (hppa_require_attach): New local variable, pt_status
+	  (hppa_get_process_events): New function
+
+	* infptrace.c (call_ptrace): Simplify control flow.
+	(proc_wait): Move here from inftarg.c, add target_post_wait call.
+
+	* infptrace.c (call_ptrace): Add some debugging code.
+
+	* infptrace.c (child_pid_to_exec_file): Declare variable.
+
+	* infptrace.c (kill_inferior): Clean up call to proc_wait.
+
+	* infptrace.c: 
+	(Call_ptrace): When the ptrace request is PT_SETTRC,
+	call ptrace and then call parent_attach_all.
+
+	* infptrace.c: 
+	(Child_has_syscall_event): New function. only applicable
+	(for now) on HPUX 10.30 and beyond via the ttrace call.
+	In infptrace.c there is a default operation.
+ 	With ttrace, it is possible to tell the kernel to
+	notify the debugger that the target program is about to make
+	or return from a syscall.
+	(child_thread_alive): New function. a default function.
+	ptrace doesn't support kernel threads.
+	(hppa_enable_page_protection_events): Defualt function
+	(hppa_disable_page_protection_events): Default function
+
+	* infptrace.c (child_pid_to_exec_file): Fix number of params to
+ 	cal_ptrace call.
+
+	* infptrace.c (hppa_pid_or_tid_to_str): New function.
+	(hppa_switched_threads): New function.
+	(hppa_ensure_vforking_parent_remains_stopped): New function.
+	(hppa_resume_execd_vforking_child_to_get_parent_vfork): New function.
+
+	* infptrace.c: Most of the changes found in infptrace.c should
+	    be moved to hppah-nat.c
+	  (PT_VERSION): A new define
+	  (startup_semaphore_t): A new struct type. it is used to 
+	    coordinate the parent and child processes after a fork and 
+	    before an exec on HPUX.
+	  (call_ptrace): Changes to determine whether the ptrace
+	    request is for starting the tracing of the target process.
+	  (parent_attach_all): New funct. used on HPUX for coordinating
+	    the parent and child processes after a fork and before and exec.
+	  (hppa_acknowledge_forked_child): New funct. prabably belongs 
+	    in hppah-nat.c
+	  (hppa_enable_catch_fork): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_disable_catch_fork): New funct. probably belongs in
+	    hppah-nat.c
+	  (hppa_create_catch_fork_hook): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_enable_catch_vfork): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_disable_catch_vfork): New funct. probably belongs in
+	    hppah-nat.c
+	  (hppa_create_catch_vfork_hook): New funct. probably belongs to
+	    hppah-nat.c
+	  (hppa_target_has_forked): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_target_has_vforked): New funct. probably belongs in
+	    hppah-nat.c
+	  (process_wait): New funct. also ifdefed for proc_wait.
+	  (kill_inferior):  Call proc_wait rather than wait. this is 
+	    pretty hacky. 
+	  (pre_fork_inferior): New function. used only by HPUX.
+	    probably should be defined elsewhere.
+
+	* infrun.c (follow_inferior_fork): Only define on HP.
+	(wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have
+	shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE
+	removed by HP.
+
+	* infrun.c (normal_stop): Add a call to the TUIDO 
+	macro just before the annotate_stopped label. This
+	updates the windows after each program stop.
+
+	* infrun.c (normal_stop): Verify stop_command is non-zero before
+	dereferencing it (it won't be set if dbx_commands is set).
+
+	* infrun.c (resume): Add #ifdef HPPAHPUX around HPUX-specific
+	code.
+
+	* infrun.c (resume): Add missing semicolon.
+
+	* infrun.c (wait_for_inferior): Fix syntax error.
+
+	* infrun.c (follow_fork_mode_kind_names): Removed "both" option.
+	(follow_fork): Added parameters. additional code for handling
+	following of parent, following of child
+	(resume): Added code for deciding how to resume in presence of
+	fork. Additional params to follow_fork call.
+
+	* infrun.c (follow_exec): Ifdef for HPUXHPPA for the moment, the
+ 	code in here assumes the existance of the child_ops target
+ 	vector. This is incorrect for Solaris.
+
+	* infrun.c (resume): Fixed ifdefs, HPPAHPUX -> HPUXHPPA.
+
+	* infrun.c (wait_for_inferior): Fixed a matching parens problem --
+ 	matching curly brace inside ifdefed code which is not being
+ 	compiled. Change local validFlag to be an 'int' rather than a
+ 	'bool' and fixed the corresponding assignment statements.
+
+	* infrun.c: 
+	Two new global variables: Inferior_ignoring_startup_exec_events and
+	inferior_ignoring_leading_exec_events.
+	New static variables: Parent_of_vfork_trap_expected_and_ignorable,
+	step_resume_breakpoint, through_sigtramp_breakpoint, pending_follow,
+	follow_vfork_when_exec
+	(follow_inferior_fork): Does what follow_fork did! 
+	(follow_fork): Is now a wrapper function for follow_inferior_fork
+	(follow_vfork): Is now a wrapper function for follow_inferior_fork
+	(follow_exec): New function, handles an exec event.
+	(resume): Remove 3 local variables: Child_pid, has_forked, has_vforked.
+	move and expand code that tries to follow a fork (i.e. also check
+ 	for vfork and exec
+	(init_wait_for_inferior): Initialize the new structure, pending_follow
+	(delete_breakpoint_current_contents): When deleting all the breakpoints also 
+	set the breakpoint struct pointer to NULL.
+	(wait_for_inferior): A number of changes.
+ 	The step_resume_breakpoint and through_sigtramp_breakpoint local 
+	variables are now visible in entire module. 
+	Changed name of variable from child_inferior_pid to saved_inferior_pid.
+	Added several cases to the event processing switch statement: 
+	Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD.
+	Also, for TARGET_WAITKIND_STOPPED, check to see if expecting a trap
+	from the parent of a vfork (ignorable) otherwise break as usual.
+	When determining the value of 'random_signal' (0 or 1), no longer check for 
+	catchpoints. 
+	When determining how to handle unexpected signals, must now take into
+	account fork, vfork, and exec.
+	Change call to PC_IN_CALL_DUMMY to a call to CALL_DUMMY_HAS_COMPLETED
+	At stop_stepping label, check to see if stopped for fork or
+	vfork event.
+
+	* infrun.c: New code is related to threads and fork/vfork/exec.
+ 	New static variable: Thread_step_needed
+	Deleted static variable: Parent_of_vfork_trap_expected_and_ignorable
+	Altered the pending_follow and fork_event structs
+	(follow_inferior_fork): Before detaching from child and removing
+	all breakpoints form it -- but only if forking or following 
+ 	vforks as soon as they happen. Also reset the solib inferior hook.
+	The same kind of logic applies to hitting step_resume_breakpoints
+	(calling breakpoint_re_set_thread) and to resetting and inserting 
+	breakpoints. 
+	(follow_exec): Forward decl
+	(follow_vfork): Check to see if gdb followed the child. If
+	the child exec'd before gdb saw the parent's vfork event
+	then call follow_exec.
+	(follow_exec): If the exec occured after a vfork, then follow
+	the vfork as well. Do it before following the exec.
+	Make sure to update breakpoints after and exec
+	(resume): New local variable, should_resume. 
+	Change parameters in calls to follow_fork, follow_vfork, and 
+	follow_exec. Some changes to the way various pending_follow.kind
+	situations are handled (there's TARGET_WAITKIND_FORKED, 
+	TARGET_WAITKIND_VFORKED, ARGET_WAITKIND_EXECD. Some additional
+	conditions to check before deciding to resume the target (i.e.
+	should_resume=1, stepping?, thread_step_needed?i, regular 
+	resume?)
+	(proceed): When proceeded at location that does not have a breakpoint
+	set thread_step_needed=0 to indicate that it is not necessary to
+	single step thread over breakpoint. SOme additional checks to see
+	if it is necessary to step thread over breakpoint.
+	(start_remote): Remove call to clear_proceed_status.
+	(init_wait_for_inferior): Initialize new fields in fork_event
+	structure and add a call to clear_proceed_status.
+	(wait_for_inferior): New local variable: New_thread_event.
+	Initialize thread_step_needed = 0. 
+	Minor massaging of conditions for adding a new thread to the thread list. 
+	No longer resuming execution after adding a new thread. Let user play with thread first.
+	Some changes in the way TARGET_WAITKIND_FORKED, ARGET_WAITKIND_VFORKED,
+	TARGET_WAITKIND_EXECD are handled -- this is all HPUX related. 
+	Simplified TARGET_WAITKIND_STOPPED -- HP previously had some
+	more complicated code in here. 
+	Moved the code to resume threads to after the large case statement that processes the events.
+	Additional processing for stop_signal=TARGET_SIGNAL_TRAP. 
+	Cleanup code at process_event_stop_test label. 
+	Set thread_step_needed when processing a BPSTAT_WHAT_SINGLE.
+	Minor massaging of fork/vfork/exec part of stop_stepping code.
+	(normal_stop): Minor changes. calling show_and_print_stack_frame.
+	(xdb_handle_command): New function
+	(_initialize_infrun): Handle xdb_commands. also handle dbx commands
+
+	* infrun.c: Changes to support following forks, and handling
+	    catchpoints.
+	  (follow_fork_mode_kind_names): New array
+	  (follow_fork): New function. implements the follow parent,
+	    or child functionality.
+ 	  (resume): Additions to check whether the target process 
+	    just forked and decide which process to follow.
+	  (wait_for_inferior): Additional variables (child_inferior_pid,
+	      stepping_through_solib_after_catch, 
+	    -  stepping_through_solib_catchpoints.
+	    -  Altered CURRENTLY_STEPPING macro to check for stepping through
+	       a shared library after hitting a catchpoint.
+	    - Add parameters to save_infrun_state call
+	    - Check for fork and vfork when deciding if event is a random
+	       signal
+	    - When considering stops due to breakpoints, check for 
+	      BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK
+	    - Check for stop due to an explicit catchpoint
+	    - When checking for single stepping event, also check for
+	      stepping to get out of dynamic linker's hook after catching
+	      a shlib event
+	  (is_internal_shlib_eventpoint): New funct. check to see if 
+	      event type is bp_shlib_event.
+	  (stopped_for_internal_shlib_event): New funct. check for shlib
+	      events
+	  (stopped_for_shlib_catchpoint): New funct. check for catchpoints.
+	  (normal_stop): Additions to check for shlib event
+	  (set_follow_fork_mode_command): New funct. handles the new follow
+	      fork command.
+	  (_initialize_infrun): Additions for follow-fork-mode command.
+
+	* infrun.c: Ifdefing references to 
+	switched_from_inferior_pid for HPUXHPPA. They don't seem 
+	useful for Solaris (i.e. non-HPUX)
+
+	* infrun.c: Included tuiData.h and tuiDataWin.h, ifdefed for TUI.
+	Included top.h. New static variables: Switched_from_inferior_pid, 
+	number_of_threads_in_syscalls. 
+	(follow_inferior_fork): If there is a step_resume breakpoint
+	explicitly reset the thread number. 
+	(resume): For TARGET_WAITKIND_VFORKED, removed a check for getting 
+	the vfork event to soon.
+	(init_wait_for_inferior): Added parameter to call to 
+	breakpoint_init_inferior. Initialize number_of_threads_in_syscalls.
+	(wait_for_inferior): New local variables: Prev_sal,
+	enable_hw_watchpoints_after_wait, stepping_through_sigtramp,
+	stepped_after_stopped_by_watchpoint. Enable watchpoints after a wait.
+	Added cases for TARGET_WAITKIND_SYSCALL_ENTRY and 
+	TARGET_WAITKIND_SYSCALL_RETURN.
+	Do additional processing if stop due to breakpoint, but breakpoint is
+	only valid for a thread other than the one currently running. Additional
+	parameters to save_infrun_state and load_infrun_state. Some additional
+	processing for BPSTAT_WHAT_STEP_RESUME. Some additional processing to 
+	handle stepping over a function.
+	(normal_stop): Added notification of switching threads. ifdefing some
+	TUI changes and leaving out non-essential TUI changes.
+	(restore_selected_frame): Ifdefing some TUI changes
+	(restore_inferior_status): Ifdefing some TUI changes
+
+	* infrun.c: Removed the TUI ifdefs and TUI code. Also removed
+	include for top.h. HP introduced this. I'm taking it out.
+
+	* inftarg.c (child_detach_from_process): Declare.
+	(child_attach_to_process): Declare.
+	(child_stop): Make static to match declaration.
+
+	* inftarg.c (ptrace_him): Change prototype back to return int. 
+
+	* inftarg.c (ptrace_me): Remove debug output, pass NULL to
+	fork_inferior if not HPUX.
+
+	* inftarg.c: 
+	  (child_require_attach): New funct prototype and definition
+	  (child_require_detach): New funct prototype and definition
+	  (proc_wait): Funct prototype and definition are enclosed by
+	    proc_wait ifndef
+	  (child_attach_to_process): New function, does most of the 
+	    work that child_attach used to do and some additional 
+	    work to determine whether gdb is already attached to the
+	    target how to react.
+	  (child_attach): Altered. It's now a wrapper for
+	    child_attach_to_process.
+	  (child_require_attach): New function, called if should attach
+	    even when gdb is already attached to target.
+	  (child_detach_from_process): New function, does most of the 
+	    work that child_detach used to do and some additional work
+	    to determine whether gdb is currently attached to the target.
+	  (child_detach): Altered. It's now a wrapper for 
+	    child_detach_from_process.
+	  (child_require_detach): New function, called if should try to 
+	    detach even when gdb is not attached to target.
+	  (ptrace_him): Calls a new function, target_acknowledge_forked_child.
+ 	    Currently, target_acknowledge_forked_child, is only defined to
+	    do something for HPUX.
+	  (child_create_inferior): Changed call to fork_inferior.
+	  (child_ops): Added to_require_attach and to_require_detach fields
+	    to the child_ops target ops vector.
+
+	* inftarg.c: 
+	  Some hacks for ttrace work 
+	  (child_wait): Additional local variables, additional code in
+	    while loop to check for: Process exited, process forked, 
+	    process vforked, process execd
+	  (child_thread_alive): John B. seems to think that the kill 
+	    call is inapproapriate for HPUX.
+	  (child_attach_to_process): Using strtol rather than atoi.
+	    no longer check for case where there is no known exec file.
+	  (child_post_attach): New function, a default, a no-op
+ 	  (child_insert_fork_catchpoint): New function, a default, a no-op
+	  (child_remove_fork_catchpoint): New function, a default, a no-op
+	  (child_create_catch_fork_hook): Deleted
+	  (child_create_catch_vfork_hook): Deleted
+	  (child_insert_vfork_catchpoint): New function, a default, a no-op
+	  (child_remove_vfork_catchpoint): New function, a default, a no-op
+	  (child_can_follow_vfork_prior_to_exec ):new function, a default, 
+ 	     a no-op
+	  (child_insert_exec_catchpoint): New function, a default, a no-op
+	  (child_remove_exec_catchpoint): New function, a default, a no-op
+	  (child_has_execd): New function, a default, returns 0
+	  (child_reported_exec_events_per_exec_call): New function, a 
+ 	     default, returns 1
+	  (child_has_exited): New function, a default.
+	  (child_core_file_to_sym_file): New function, a default, returns NULL.
+	  (child_ops): Initialize new target_ops vector fields to the 
+	     child* functions.
+	* infptrace.c: 
+	(Call_ptrace): For HPUX, handle additional requests: Pt_CONTIN1,
+	  PT_STEP1.
+	(require_notification_of_events): Add several signals to the
+	  set of events requiring notification: Ptrace_SIGNAL, 
+	  PTRACE_EXEC, PTRACE_FORK, PTRACE_VFORK
+	(child_acknowledge_created_inferior): This function is only
+	  defined if CHILD_ACKNOWLEDGE_CREATED_INFERIOR is defined.
+	(child_post_startup_inferior): Function is only defined if
+	  CHILD_POST_STARTUP_INFERIOR is defiend. Also, now call
+  	  require_notification_of_events.
+	(child_create_catch_fork_hook): Deleted
+	(child_create_catch_vfork_hook): Deleted
+	(child_insert_fork_catchpoint): New function
+	(child_remove_fork_catchpoint): New function
+	(child_insert_vfork_catchpoint): New function
+	(child_remove_vfork_catchpoint): New function
+	(child_has_forked): Now enclosed by a CHILD_HAS_FORKED ifdef
+	(child_has_vforked): Now enclosed by CHILD_HAS_VFORKED ifdef
+	(child_can_follow_vfork_prior_to_exec): New function
+	(child_insert_exec_catchpoint): New function
+	(attach): Removed call to require_notification_of_events 
+	(child_post_attach): New function, call to 
+	  require_notification_of_events moved here.
+	(child_pid_to_exec_file): New enclosed by CHILD_PID_TO_EXEC_FILE ifdef 
+	  introduced the concept of a saved_inferior_pid
+	(hppa_require_attach): Add some code to decide if gdb is already 
+	  attached to process. Can not figure this out via a ptrace call.
+	(hppa_insert_hw_watchpoint): New function
+	(hppa_remove_hw_watchpoint): New function
+
+	* inftarg.c: 
+	(child_attach_to_process): Change position in file
+	(child_detach_from_process): Change position in file
+
+	* inftarg.c: 
+	(child_attach_to_process): Changed parameter to child_wait call
+
+	* inftarg.c: 
+	(child_post_wait): New function declaration and definition
+	(ptrace_him):
+ 	   - change return value to a void.
+	   - change target_acknowledge_forked_child call to 
+	     target_acknowledge_created_inferior
+	   - call target_post_startup_inferior rather than returning pid.
+	(child_attach_to_process): Change param name, fail_if_already_attached
+	  -> after_fork.
+	  Invert a couple of if-then-else statments.
+	  Use REQUIRE_ATTACH macro
+	  (child_attach): Change params in child_attach_to_process call
+	  (child_require_attach): Change params in child_attach_to_process call
+	  (child_detach_to_process): Change param name, 
+	    fail_if_already_attached -> after_fork.
+	  Invert a couple of if-then-else statments.
+	  Use REQUIRE_DETACH macro
+	  (child_detach): Change params in child_detach_from_process call
+	  (child_require_detach): Change params in child_detach_from_process
+	     call
+	  (child_post_startup_inferior): New function
+	  (child_acknowledge_created_inferior): New function
+	  (child_clone_and_follow_inferior): New function
+	  (child_post_follow_inferior_by_clone): New function
+	  (child_create_catch_fork_hook): New function
+	  (child_create_catch_vfork_hook): New function
+	  (child_has_forked): New function
+	  (child_has_vforked): New function
+	  (child_post_follow_vfork): New function
+	  (child_stop): No longer a static function
+	  (child_pid_to_exec_file): New function
+
+	* inftarg.c: 
+	(child_wait): Child_pid becomes related pid. return pid
+	rather than inferior_pid. Changes are in code handling fork
+	and vfork
+
+	* inftarg.c: 
+	Include gdb_stat.h and sys/unistd.h
+	(child_wait): New local variables. Check for live threads.
+	Check for syscall events
+	(child_thread_alive): No longer a static funct. 
+	(ptrace_him): Remove some code inserted in snap3
+	(child_create_inferior): Added a bunch of code to handle a 
+	bad interaction between start-up-with-shell and the HP
+	catch-fork/catch-exec logic. I am ifdefing this for 
+	HPUXHPPA for now.
+	(child_has_syscall_event): New default target_ops function
+	(child_enable_exception_callback): New default target_ops function
+	(child_get_current_exception_event): New default target_ops function
+	(child_ops): 3 new fields
+
+	* inftarg.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs
+
+	* inftarg.c: Reverted previous change.
+	
+	* infttrace.c (hppa_remove_hw_watchpoint): Fix check for write
+	access hardware watchpoint.
+
+	* infttrace.c (proc_wait): Rename from proc_wait.
+
+	* infttrace.c (require_notification_of_exec_events): New function;
+	just notify of exec events, not all events, and just the specified
+	pid, don't include it's children.
+	(child_acknowledge_created_inferior): Call new function
+	require_notification_of_exec_events instead of
+	require_notification_of_events.
+	(child_post_startup_inferior): Call require_notification_of_events
+
+	* infttrace.c: Changed all references to boolean to int.
+	Changed all references to TRUE and FALSE to 1 and 0.
+
+	* irix5-nat.c (symbol_add_stub): Add params to call to
+ 	symbol_file_add.
+
+	* jv-lang.c (get_dynamics_objfile): Add 2 more parameters to call
+ 	to allocate_objfile.
+
+	* main.c (fputs_unfiltered): Changes to prevent cursor form
+ 	jumping around in the TUI. Altered where tuiTermUnsetup and
+ 	tuiTermSetup are called
+
+	* main.c (fputs_unfiltered): Changed function so that it
+	checks to see if output is to a string buffer or to a 
+	FILE stream and does the correct action (i.e. strcat or
+	fputs). Fixed params for fputs call.
+
+	* main.c (fputs_unfiltered): Don't try to call the TUI's
+	CommandCharCount functions when the TUI isn't enabled.
+
+	* main.c (fputs_unfiltered): Change FILE to GDB_FILE.
+
+	* main.c (main): If the user gives the --version or --help flags,
+ 	disable the TUI.
+
+	* main.c (tui_version, xdb_commands, dbx_commands): New variables.
+  	(main): New command line arguments --tui, --xdb, --dbx; add call
+ 	to tyiCleanUp via tuiDo to main loop.
+	(fputs_unfiltered): Tui related changes.
+
+	* main.c: Define 2 new global variables, gdb_stdout and gdb_stderr
+ 	of type GDB_FILE.
+ 	(main): Allocate space for and initialize gdb_stdout and gdb_stdin.
+
+	* objfiles.c (find_pc_sect_section): Make end condition be less
+	than s->endaddr, not less than or equal to s->endaddr.
+
+	* objfiles.c: 
+	(allocate_objfile): 2 new parameters: User_loaded and is_solib.
+	When appropriate, record in the object file that it is user loaded.
+ 	The run command can use this information to purge object file
+	entries associated with the old inferior and keep user loaded 
+	object files loaded via the add-symbol-file command.
+	(objfile_purge_solibs): New function. deletes all objectfile entries
+	that are not explicitly loaded by the user.
+	
+	* objfiles.c: 
+	(objfile_relocate): Check for LOC_INDIRECT
+	(find_pc_sect_section): Change condition from 
+	pc < s->endaddr to pc <= s->endaddr
+
+	* objfiles.h: 
+	New variables: User_loaded and is_solib
+	(OBJF_SHARED): New macro. used to distinguish objfile for
+	shared library from "vanilla" objfile.
+	(allocate_objfile): Add new parameters to function decl.
+	(objfile_purge_solibs): New function decl.
+	
+	* objfiles.h: Add some typedefs: Importentry, ExportEntry.
+	Add some new variables: Import_list, import_list_size,
+	export_list, export_list_size
+	
+	* osfsolib.c: 
+	(symbol_add_stub): Added params to call to symbol_file_add
+
+	* pa/hpux1020.mh (NATDEPFILES): Add corelow.o, symbol table and
+	solib files.
+	
+	* pa/hpux1100.mh (NAT_FILE): Use nm-hppah11.h.
+	(NATDEPFILES): Add symbol table and solib files.
+
+	* pa/nm-hppah11.h: New file, HPUX11-only definitions.
+
+	* pa/tm-hppa.h (proc_wait): Remove decl and macro.
+
+	* parse.c (write_dollar_variable): Handle cases in which variables
+	besides the debugger ones start with $ and $$.
+	(parse_nested_classes_for_hpacc): New function.  Parse a string that 
+	is possibly a namespace / nested class specification.
+	(find_template_name_end): New function. 
+
+	* procfs.c: 
+	(procfs_init_inferior): Return value is now a void.
+
+	* procfs.c (procfs_ops): Initializing new target ops vector fields. see list below.
+	
+	* procfs.c: 
+	(procfs_ops): Adding new target_ops vector fields and
+	  removing a few. see list below
+
+	* procfs.c: Added new fields to procfs_ops. 
+	Necessary since we still have oldstyle initialization in
+	this file
+
+	* pyr-tdep.c (pyr_do_registers_info): Change stdout to gdb_stdout.
+	(frame_locals_address): Change stderr to gdb_stderr.
+	(frame_args_addr): Ditto.
+
+	* pyr-xdep.c (fetch_inferior_registers): Change stderr to
+	gdb_stderr.
+
+	* serial.c (serial_close): Call gdb_fclose, not fclose on a
+	GDB_FILE.
+
+	* serial.c (serial_logchar): Change chtype to ch_type.  sigh.
+
+	* solib.c (look_for_base): The parameter to file must be 
+	of type FILE *. So cast exec_bfd -> iostream in the call
+	to fileno as a FILE *, not a GDB_FILE *. This will work because
+	exec_bfd -> iostream is declared and given a value in bdf and 
+	bfd will continue to use FILE rather than GDB_FILE.
+
+	* solib.c: 
+	(solib_add): Remove references to exec_ops.
+
+	* solib.c: 
+	(solib_add): Update exec_ops.to_sections
+
+	* solib.c: 
+	(symbol_add_stub): Added params to call to symbol_file_add
+
+	* solib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to 0.
+	functionality not implemented for this target.
+
+	* solib.h: Added macro definitions. These macros generate
+	  error messages for solaris??
+	  (SOLIB_CREATE_CATCH_LOAD_HOOK)
+	  (SOLIB_CREATE_CATCH_UNLOAD_HOOK)
+	  (SOLIB_HAVE_LOAD_EVENT)
+	  (SOLIB_LOADED_LIBRARY_PATHNAME)
+	  (SOLIB_HAVE_UNLOAD_EVENT)
+	  (SOLIB_UNLOADED_LIBRARY_PATHNAME)
+	  (SOLIB_IN_DYNAMIC_LINKER)
+	  (SOLIB_RESTART)
+
+	* somread.c (is_in_import_list): Ditto.
+
+	* somread.c (som_symfile_read): Added some comments
+
+	* somread.c (som_symfile_read): Read in import and export lists.
+	(som_symtab_read): Change test for dynamic executable.
+	(is_in_import_list): New function. Check if a given symbol name
+ 	is in the import list.
+	(init_import_symbols): New function. Read in and initialize the 
+	som import list.
+	(init_export_symbols): New function. Read in and initialize the 
+	som export list.
+
+	* somread.c: 
+	(som_symfile_read): Fix missing comment delimiters
+
+	* somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. 
+	Define bit of __dld_flags in HP-UX a.out files.
+	(DLD_FLAGS_HOOKVALID): Ditto.
+	(DLD_FLAGS_LISTVALID): Ditto.
+	(DLD_FLAGS_BOR_ENABLE): Ditto.
+	(som_solib_total_st_size): Cumulative size in bytes of the 
+	symbol tables of all shared objects on the so_list_head list.
+	(som_solib_st_size_threshhold_exceeded): Threshold for adding symbols
+	for shlibs.
+	(som_solib_sizeof_symbol_table): New function. Computes size of 
+	symbol table for a shlib.
+	(som_solib_load_symbols): New function. Load symbols from shlib.
+	(som_solib_add): Detect if __dld_list is not valid. 
+	Record main program's symbol table size.
+	Load symbols if called from command line.
+	Keep threshold into account when loading shlib symbols.
+	(som_solib_create_inferior_hook): Use dld_flags macros.
+	(som_sharedlibrary_info_command): Let user know if symbols were 
+	not loaded.
+	(som_solib_restart): Discard all the shlibs descriptors.
+	(_initialize_som_solib): Chenge help message for auto-solib-add
+	command.
+	Set threshold for symbol table to 50 megabytes.
+
+	* somsolib.c (_initialize_som_solib): Added call to som_solib_restart.
+	(som_solib_restart): New function
+	(som_solib_in_dynamic_linker): New function
+	(som_solib_desire_dynamic_linker_symbols): New function
+	(som_solib_unloaded_library_pathname): New function
+	(som_solib_loaded_library_pathname): New function
+	(som_solib_library_pathname): New function
+	(som_solib_have_unload_event): New function
+	(som_solib_have_load_event): New function
+	(som_solib_create_catch_unload_hook): New function
+	(som_solib_create_catch_load_hook): New function
+	(som_solib_create_inferior_hook): Rewritten
+	dld_cache: New struct
+	addr_and_unwind_t: New struct
+	(find_unwind_entry) added prototype
+
+	* somsolib.c (som_solib_create_inferior_hook): Introduce new local
+ 	msymbol2 and change some msymbol's to msymbol2's -- was clobbering
+ 	msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline,
+	and ultimately core dumping with a SEGV.
+
+	* somsolib.c: 
+	Include assert.h
+	(som_solib_mapped_entry): Additional comments for text_addr, 
+	text_link_addr, text_end, and tsd_start_addr fields. Commenting
+	out 2 tsd fields, __data_start and __data_end. 
+	(som_solib_add_solib_objfile): Add params to calls to symbol_file_add.
+	Add some code for distinguishing between a shared library and other 
+	objfiles. This appears to be a prelude to thread local storage.	
+	(som_solib_load_symbols): Changes to printf statement 
+	enclosed by SOLIB_DEBUG ifdef.
+	(som_solib_add): Change comment to correctly specify path
+	to end.o -- /opt/langtools/lib/end.o. changes to printf statement
+ 	enclosed by SOLIB_DEBUG ifdef.
+	Removed several SOLIB_DEBUG ifdefs and the associated printfs.
+	Add code to find the start address for the object file's thread 
+	local storage
+	(som_solib_create_inferior_hook): Fix warning messages use correct
+	path to end.o -- /opt/langtools/lib/end.o. Change control flow. 
+	No longer user early returns from function is cases of error.
+	(reset_inferior_pid): New function
+	(som_solib_remove_inferior_hook): New function
+	(so_lib_thread_start_addr): New function. used for tsd.
+
+	* somsolib.c: Removed references to ASSERT macro.
+
+	* somsolib.c: Add debugging macro.
+	(struct som_solib_mapped_entry): Add new field tsd_start_addr.
+	(struct so_list): Added new field solib_addr.
+	(som_solib_add_solib_objfile): New function. 
+	(som_solib_load_symbols): Rewritten.
+	(som_solib_add): Make sure we don't load the symbols in if the 
+	threshold was exceeded.
+	(som_solib_get_solib_by_pc): New function. Return the address of
+ 	handle of the shared library.
+	(som_solib_restart): Disable breakpoints at restart.
+	(_initialize_som_solib): Set threshold to 100 megabytes.
+
+	* somsolib.c: Add include of fcntl.h so that O_RDONLY is defined.
+
+	* somsolib.h (DISABLE_UNSETTABLE_BREAK): New macro.
+	(PC_SOLIB): New macro.
+
+	* somsolib.h: 
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): Define
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): Define
+	(SOLIB_HAVE_LOAD_EVENT): Define
+	(SOLIB_LOADED_LIBRARY_PATHNAME): Define
+	(SOLIB_HAVE_UNLOAD_EVENT): Define
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): Define
+	(SOLIB_IN_DYNAMIC_LINKER): Define
+	(SOLIB_RESTART): Define
+
+	* somsolib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to use 
+	som_solib_remove_inferior_hook.
+
+	* somsolib.h: 
+	(som_solib_create_catch_load_hook) 
+	(som_solib_create_catch_unload_hook)
+	(som_solib_have_load_event)
+	(som_solib_loaded_library_pathname)
+	(som_solib_have_unload_event)
+	(som_solib_unloaded_library_pathname)
+	(som_solib_in_dynamic_linker)
+	Fix prototypes to use type names, not parameter names.
+
+	* source.c (find_source_lines): Make non static.
+	(open_source_file): Ditto.
+	(source_full_path_of): New function.
+	(print_source_lines): Rename to print_source_lines_base and make
+	static; formatting.
+	(print_source_lines): New function.
+	(forward_search_command): Tui changes.
+	(reverse_search_command): Tui changes.
+	(_initialize_source): Add xdb and dbx compatibility commands.
+
+	* source.c (list_command): Handle case of odd number of source 
+	lines to display.
+
+	* source.c: 
+	(source_full_path_of): New function. file was overlooked
+	in merge ;-/.
+	
+	* stack.c (func_command): Make high bound be <, not <=.
+
+	* stack.c (_initialize_stack): For the backtrace command, delete
+	the help line about usage, since this has to be a valid help
+	message for the 'where' command too.
+	
+	* stack.c (current_frame_command): Add a check for the 
+	existance of a stack. If there is no stack produce an
+	error message and exit.
+	
+	* stack.c (down_silently_base, up_silently_base,
+ 	args_plus_locals_info, print_frame_info_base,
+ 	print_stack_frame_base, print_stack_frame_base_stub): Declare.
+	(print_frame_local_vars): Add'l parameter.
+	(print_stack_frame_stub): New version created, old version renamed
+ 	to show_and_print_stack_frame_base_stub.
+	(print_stack_frame_base_stub, print_only_stack_frame_stub,
+ 	show_and_print_stack_frame, print_only_stack_frame,
+ 	stack_publish_stopped_with_no_frame, print_frame_info,
+ 	show_stack_frame, backtrace_full_command, args_plus_locals_info,
+	select_and_print_frame, select_and_maybe_print_frame,
+	current_frame_command, func_command): New functions.
+	(backtrace_command): New function, old renamed to
+	backtrace_command_1.
+	(print_block_frame_locals, print_frame_local_vars): Additional
+	parameter, number of tabs.
+	(up_silently_command): New function, old renamed to
+	up_silently_command_base.
+	(down_silently_command): New function, old renamed to
+	down_silently_base.
+	(_initialize_stack): Register new commands based on values of
+	xdb_commands and dbx_commands variables.
+	
+	* stack.c (func_command): Make high bound be <, not <=.
+	
+	* stack.c (parse_frame_specification): Fix prototype to match
+	function definition.
+	(show_and_print_stack_frame_stub): Fix name.
+	(select_and_print_frame): Change uncaught tuiDO call.
+	
+	* stack.c (up_silent_base): Rename from up_silently_command_base.
+	
+	* symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's
+	defined.
+
+	* symfile.c (add_psymbol_with_dem_name_to_list): New function.
+	Adds a symbol with a long value to a psymtab. Differs from 
+	add_psymbol_to_list in taking both a mangled and a demangled name.
+	
+	* symfile.c (compare_psymbols): Call strcmp directly, instead of
+	using macro.
+	
+	* symfile.c (symbol_file_add): Reindent portions.
+	(symbol_file_command): Add call to tuiDo.
+	
+	* symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's
+	defined.
+
+	* symfile.c (symfile_bfd_open): Add code to call PXDB on hpux, if
+	the file has not already been processed by pxdb.
+	Added define USE_PXDB.
+	
+	* symfile.c (symfile_bfd_open): Change parenthesis positioning
+	around call to hpread_pxdb_check.
+	
+	* symfile.c (symfile_bfd_open): Make not static. 
+	(RESET_HP_UX_GLOBALS): New macro. Resets globals when new symbol
+	file loaded.
+	(USE_PXDB): Not needed. Removed.
+	(symbol_file_add): Add HP specific code to deal with pxdb.
+	(symbol_file_command): Reset HP specific globals if new symbol file
+	loaded.
+	(symfile_bfd_open): Comment out checking for pxdb.
+	(reread_symbols): Reset HP specific globals.
+	
+	* symfile.c (symfile_bfd_open): Uncomment hpus specific code.
+	
+	* symfile.c: 
+	(symbol_file_add): Add user_loaded and is_solib parameters.
+	fixed number of parameters in call to allocate_objfile
+	(symbol_file_command): Added call to SOLIB_RESTART macro.
+	fixed number of parameters in calls to symbol_file_add.
+	(add_symbol_file_command): Fixed number of parameters in calls to 
+	symbol_file_add.
+	
+	* symfile.c: Added prototype for hpread_pxdb_check.
+	
+	* symfile.c: Changed HPUX_SNAP1 ifdef to HPUXHPPA. enclosed calls to 
+	  RESET_HP_UX_GLOBALS with an HPUXHPPA ifdef
+	
+	* symfile.h (symfile_bfd_open): Add protptype.
+	
+	* symfile.h: Add prototype for add_psymbol_with_dem_name_to_list.
+	
+	* symfile.h: Clarify purpose of auto_solib_add.
+	
+	* symmisc.c (maintenance_print_symbols): Call gdb_fclose, not
+	fclose on a GDB_FILE* during cleanup.
+	(maintenance_print_psymbols): Call gdb_fclose, not fclose on a
+	GDB_FILE* during cleanup.
+	(maintenance_print_msymbols): Call gdb_fclose, not fclose on a
+	GDB_FILE* during cleanup.
+	
+	* symmisc.c (maintenance_print_symbols): Gdb_fclose now takes a
+	GDB_FILE ** parameter. Fix the local GDB_FILE variables and the 
+	call to make_cleanup.
+	(maintenance_print_psymbols): Ditto
+	(maintenance_print_msymbols): Ditto
+	
+	* symmisc.c (print_objfile_statistics): Close quotes in 
+	output strings.
+
+	* symmisc.c: 
+	(Print_symbol): Add LOC_INDIRECT to switch statement
+	(print_partial_symbols): Add LOC_INDIRECT to switch statement
+
+	* symtab.c (find_pc_sect_psymtab): High bounds should be <, not <=.
+	(find_pc_sect_symtab): Ditto.
+
+	* symtab.c (hp_som_som_object_present): New flag to indicate HP 
+	compiled code.
+	(find_pc_sect_psymtab): Change tests to make sure we are checking
+	the texthigh adress as well.
+	(lookup_transparent_type): New function.  Look up a type name
+	in the struct_namespace.  The type returned must not be opaque.
+	(find_pc_sect_symtab): Make sure we check the address 'pc' itself,
+	too.
+	(find_addr_symbol): Prepare to handle LOC_INDIRECT address class, but
+ 	leave it commented out.
+	(find_pc_sect_line): Return correct information if pc is in import
+	or export stub (trampoline).
+	(decode_line_1): Skip two chars, if they are '$$'. Like for HP's
+	$$dyncall. Handle cases in which varaible and function names can start 
+	with $.
+	(overload_list_add_symbol): If cannot demangle name, use it as is.
+	Free string after use.
+	(make_symbol_overload_list): Initialize oload_name to NULL and 
+	oload_name_len to 0. If demangle not successful, use name as it is.
+	Free string after use.
+
+	* symtab.c (lookup_symbol): Changed call to find_pc_sect_symtab,
+ 	to the original find_pc_symtab, in HP added fragment.
+
+	* symtab.c (lookup_symbol): Change HPUX_SNAP1 ifdef to a HPUXHPPA ifdef
+
+	* symtab.c (lookup_symbol): Ifdef the searching of symbol in the 
+	minimal symbol tables, for hpux we move this check at the end 
+	of the function.
+	Before we error out if symbol is not found in the symtab, look 
+	in the statics. 
+	Before erroring out if static symbol not found look in the globals.
+
+	* symtab.c (lookup_symbol): Return symbol as soon as found.
+	(decode_line_1): Check whether we have a conditional break. Temporarily
+	remove it from the line, to not confure perenthesis checking.
+	Handle namespaces.
+	(overload_list_add_symbol): New function. Overload
+	resolution support.
+	(make_symbol_overload_list): Ditto.
+	
+	* symtab.c: 
+	(find_template_name_end): New prototype decl.
+	(lookup_symbol):  When a global or static symbol shows up in the 
+	psymtab table, but not the symtab table, tell the user that
+	the symbol may be an inlined function or a template function and
+	provide some guidance to the user about how to more fully 
+	specify the symbol.
+	(lookup_transparent_type):  When a global or static symbol shows up 
+	in the psymtab table, but not the symtab table, tell the user that
+	the symbol may be an inlined function or a template function and
+	provide some guidance to the user about how to more fully 
+	specify the symbol. 
+	(decode_line_1): Handle template function specification when decoding a
+	line. May need to be ifdefed for HP's aCC?
+	(_initialize_symtab): Handle dbx commands.
+
+	* symtab.h (address_class): Add new address calss for 
+	LOC_THREAD_LOCAL_STATIC and LOC_INDIRECT.
+	(lookup_transparent_type): Add prototype.
+	(exception_event_kind): New enum for exception catchpoints.
+	(exception_event_record): New structure for exception catchpoints.
+	(CURRENT_EXCEPTION_KIND): New macro.
+	(CURRENT_EXCEPTION_CATCH_SAL): New macro. 
+	(CURRENT_EXCEPTION_CATCH_LINE): New macro. 
+	(CURRENT_EXCEPTION_CATCH_FILE): New macro. 
+	(CURRENT_EXCEPTION_CATCH_PC): New macro. 
+	(CURRENT_EXCEPTION_THROW_SAL): New macro. 
+	(CURRENT_EXCEPTION_THROW_LINE): New macro. 
+	(CURRENT_EXCEPTION_THROW_FILE) new macro.: 
+	(Current_EXCEPTION_THROW_PC): New macro. 
+
+	* symtab.h(make_symbol_overload_list): Add prototype.
+
+	* symtab.h: 
+	(symbol_file_add): Add new params to function decl.
+
+	* target.c (cleanup_target): Changed casting of default functions for
+	to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid of
+	warnings.
+
+	* target.c (cleanup_target): Changed the default functions for
+	  to_pid_to_exec_file and to_core_file_to_sym_file
+
+	* target.c (cleanup_target): Fixed PARAMS for to_has_syscall_event
+
+	* target.c (cleanup_target): Syntax error, mismatched paranthesis.
+
+	* target.c: 
+	  (Default_clone_and_follow_inferior): New funct prototype declaration
+	    and function definition
+	  (dummy_target): More target_ops vector changes for HPUX
+	     new fields. ifdefed for HPUX_SNAP2. New fields are
+	     to_post_wait, to_post_startup_inferior
+	     to_acknowledge_created_inferior, to_clone_and_follow_inferior,
+	     to_post_follow_inferior_by_clone,  to_create_catch_fork_hook,
+	     to_create_catch_vfork_hook, to_has_forked, to_has_vforked,
+	     to_post_follow_vfork, to_pid_to_exec_file
+	  (de_fault): Add new HPUX specific target_ops operations to
+  	     the de_fault macro
+	  (INHERIT): Add new HPUX specific target_ops operations to the
+	     INHERIT macro
+	  (find_default_clone_and_follow_inferior): New funct definition
+	  (debug_to_post_wait): New funct
+	  (debug_to_post_startup_inferior): New funct
+	  (debug_to_acknowledge_created_inferior): New funct
+	  (debug_to_clone_and_follow_inferior): New funct
+	  (debug_to_post_follow_inferior_by_clone): New funct
+	  (debug_to_create_catch_fork_hook): New funct
+	  (debug_to_create_catch_vfork_hook): New funct
+	  (debug_to_has_forked): New funct
+	  (debug_to_has_vforked): New funct
+	  (debug_to_post_follow_vfork): New funct
+	  (setup_target_debug): Initialize new target_ops vector fields.
+
+	* target.c: 
+	(Cleanup_target): Fixed the return type on a few of the 
+	  default function values.
+
+	* target.c: 
+	(Dummy_target): Add 3 new fields
+	(nosupport_runtime): New function, used in cleanup_target
+	(cleanup_target): Changes in the de_fault macro, both to
+	accomodate the new target_ops vector fields and to use
+	more accurate default functions.
+	(update_current_target): Add new target_ops vector fields to the 
+	INHERIT macro
+	(generic_mourn_inferior): The call to breakpoint_init_inferior now takes a 
+	parameter
+	(normal_pid_to_str): Adding a \0 to the end of buf.
+	(debug_to_has_syscall_event): New func
+	(debug_to_enable_exception_callback): New func
+	(debug_to_get_current_exception_event): New func
+	(setup_target_debug): Initialize the 3 new target_ops vector fields
+
+	* target.c: 
+	(Struct signals): Fix message associated with SIGRETRACT.
+
+	* target.c: 
+	  (Dummy_target): Fix syntax error
+	  (cleanup_target): Changed the default values for the new 
+	     target_ops vector fields. HP folks inappropriately set
+	     most of them to noprocess(). They should be a mixture
+	     of ignore() and return_zero().
+
+	* target.c: 
+	(Dummy_target): Add new target_ops vector fields and their initializations
+	(cleanup_target): Added new new target_ops vector fields to the de_fault 
+	  macro definition.
+	(update_current_target): Added new new target_ops vector fields to the INHERIT 
+	  macro definition
+	(return_one): New function, used by the de_fault macro
+	(debug_to_post_attach): New function
+	(debug_to_wait): Added new cases: Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED,
+	  TARGET_WAITKIND_EXECD
+	(debug_to_insert_fork_catchpoint): New function
+	(debug_to_remove_fork_catchpoint): New function
+	(debug_to_insert_vfork_catchpoint): New function 
+	(debug_to_remove_vfork_catchpoint): New function
+	(debug_to_can_follow_vfork_prior_to_exec): New function
+	(debug_to_insert_exec_catchpoint): New function 
+	(debug_to_remove_exec_catchpoint): New function
+	(debug_to_core_file_to_sym_file): New function
+	(setup_target_debug): Give new fields in current_target target_ops vector values.
+
+	* target.c: Hp merge, 4/15/98 snapshot
+	  There are new target_ops fields that pertain only
+	  to HPUX. All the changes relate to this. First,
+	  new fields are added to the dummy_target target_ops
+ 	  vector: To_require_attach, to_require_detach.
+
+	* target.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs
+
+	* thread.c (info_threads_command): Call print_only_stack_frame
+	instead of print_stack_frame.
+	(_initialize_thread): Make t an alias for thread only if
+	xdb_commands is not set.
+
+	* thread.c (thread_command): If no arguments, don't generate an
+	error, instead tell the user which thread is current.
+	(info_threads_commands): Don't lose the users position within the
+	current thread -- remember it and then restore it.
+
+	* thread.c: 
+	(struct thread_info): Add stepping_through_sigtramp field
+	(add_thread): Initialize stepping_through_sigtramp field
+	(load_infrun_state): Add stepping_through_sigtramp param and
+	make sure it gets assigned a value.
+	(save_infrun_state): Add stepping_through_sigtramp param and
+	make sure that the value gets saved.
+	(info_threads_command): Ifdefing some local variables and 
+	code for HPUXHPPA. HP folks want print the tid rather than pid?
+	Also, looks like the HP folks solved the same thread switching
+	problem that 4.17 solves. Taking 4.17.
+	(restore_current_thread): Print out the current frame after 
+	switching threads.
+	(thread_apply_all_command): Ifdefing a print statement for
+	HPUXHPPA. The HP folks want to print out a tid rather than pid?
+	(thread_apply_command): Ifdefing a print statement for
+	HPUXHPPA. The HP folks want to print out a tid rather than pid?
+	(thread_command): Decided not to take HP change.
+
+	* thread.c: Fixing gdb core dump problem causing many testsuite
+	    failures.
+	    (add_thread): Remove call to bpstat_clear, initialize
+	      tp->stepping_through_solib_catchpoints = NULL;
+
+	* thread.c: Changes for catchpoints, shared libaries, 
+	  (thread_info): Additional fields in the thread_info struct
+	     for stepping_through_solib_after_catch and 
+	     stepping_through_solib_catchpoints.
+	  (add_thread): Initialize the new thread_info fields.
+	  (load_infrun_state): Additional parameters for handling
+	     catchpoints and shared libraries.
+	  (save_infrun_state): Additional parameters for handling
+	     catchpoints and shared libraries.
+
+	* top.c (command_loop): Initialize space_at_cmd_start to 0.
+	(set_prompt): New function.
+	(togglelist, stoplist): New command lists.
+	(command_loop): Tui changes -- paranoia to make sure
+	insert mode is off when not editing.
+	(quit_force): Clean up tui on exit.
+	(init_main): Make definition of info status command dependent upon
+	dbx mode not being set.
+	(fputs_unfiltered_hook): Changed stream parameter from FILE 
+	to GDB_FILE
+	(flush_hook): Changed stream parameter from FILE to GDB_FILE
+
+	* top.h (set_prompt): Declare.
+	
+	* typeprint.c (whatis_exp): Decide real runtime type. For the vtable
+	case.
+
+	* utils.c (query): Changes to prevent cursor from jumping around in the
+	TUI. Call tuiBufferGetc explicitly, rather than passing it 
+	into tuiDo. The tuiDo function does some additional work
+	that is inappropriate when handling queries. 
+	(GDB_FILE_ISATTY): New macro that takes a GDB_FILE param and 
+	determines whether or not it's using a tty.
+	(gdb_file_isatty); called by the GDB_FILE_ISATTY macro. Does
+	the actual work
+	(init_page_info): Call GDB_FILE_ISATTY rather than ISATTY
+	(print_spaces): Fix parameter to fputc. fix call to 
+	gdb_file_adjust_strbuf.
+	(gdb_file_init_astring): Fix parameter to xmalloc
+	(gdb_file_deallocate): New function to deallocate
+	a GDB_FILE object and possibly a string buffer
+	(gdb_file_init_astring): Initialize buffer as the empty
+	string.  Indent GNU style.
+	(gdb_fopen): Gdb_fopen is called if the GDB_FILE object is
+	actually afile rather than astring. The routine now allocates space
+	for a GDB_FILE object and initializes its fields in addition to 
+	performing an fopen.
+	(gdb_flush): Fix the parameter passed into fflush. It's now
+ 	stream->ts_filestream.
+	(gdb_fclose): Pass in an object of type GDB_FILE **. Fix parameter
+ 	to fclose. It's now tmpstream->ts_filestream. Make sure to free
+ 	the GDB_FILE object and set the GDB_FILE * object to NULL.
+	(gdb_adjust_strbuf): New function. Determine if the current
+ 	ts_strbuf field contains sufficient space to concatenate a string
+ 	of length n on the end.  If not, then reallocate the ts_strbuf.
+	(print_spaces): Check to see if the GDB_FILE is afile or
+ 	astring. If it is astring, then adjust the size of the ts_strbuf
+ 	field and concatenate the correct number of spaces onto the end of
+ 	the buffer. Otherwise continue to use fputc.
+	(gdb_file_get_strbuf): New function. return a ptr to the ts_strbuf
+ 	field in a GDB_FILE object.
+	(gdb_file_init_astring): New function to allocate space for and
+ 	initialize a GDB_FILE object when it is an astring.
+	(set_width): Declare it.
+	(pagination_enabled): Define it.
+	(query): Tui changes.
+	(init_page_info, set_width): New functions.
+	(set_width_command): Call set_width.
+	(_initialize_utils): Replace termcap stuff with call to
+	init_page_info; if xdb_commands set, define am and sm commands;
+	define pagination as a set/show command.
+	(vfprintf_maybe_filtered): Change FILE to GDB_FILE.
+	(fputs_maybe_filtered): Ditto.
+	(print_spaces): Ditto.
+	(gdb_printchar): Ditto.
+	(gdb_flush): Ditto.
+	(fputs_filtered): Ditto.
+	(vfprintf_filtered): Ditto.
+	(vfprintf_unfiltered): Ditto.
+	(fprintf_filtered): Ditto.
+	(fprintf_unfiltered): Ditto.
+	(fprintfi_filtered): Ditto.
+	(print_spaces_filtered): Ditto.
+	(fprintf_symbol_filtered): Ditto.
+	(gdb_fclose): New function.
+
+	* valops.c (call_function_by_hand): Assign to param_type only
+	if function has parameters.
+
+	* valops.c (call_function_by_hand): Ifdef the
+	HP_COMPILED_TARGET stuff.
+	(value_arg_coerce): Ditto.
+
+	* valops.c (call_function_by_hand): Make sure param_type is 
+	initialized to NULL.
+
+	* valops.c (find_rt_vbase_offset): Add parameter to value_at.
+	(value_rtti_type): Ditto.
+	(value_full_object): Ditto.
+
+	* valops.c (search_struct_field_aux): Fixed mismatching parenths
+
+	* valops.c (search_struct_field_aux): Make sure TYPE_TAG_NAME
+	is not null before copying it. 
+	
+
+	* valops.c (search_struct_field_aux): Set found_class_name to null
+	if class has no name (anon unions case). Adjust base_addr 
+	computation.
+
+	* valops.c (value_arg_coerce): Change final arg to int.
+
+	* valops.c (value_arg_coerce): Remove the conditional on HP
+	compiled target, for doing coercion of float to double. Removed
+	third parameter, using_gcc.
+	(call_function_by_hand): Do not use HP_COMPILED_TARGET, just
+	use the gcc_compiled variable.
+
+	* valops.c (value_cast): Take case of the enclosing_type and 
+	pointer_to_offset fields.
+	(value_at): Use VALUE_CONTENTS_ALL_RAW
+	(value_fetch_lazy): Ditto
+	(value_assign): Handle enclosing_type, embedded_offset and 
+	pointed_to_offset fields.
+	(value_repeat): Use VALUE_CONTENTS_ALL_RAW and VALUE_ENCLOSING_TYPE.
+	(value_ind): Set enclosing_type and embedded_offset correctly,
+	for a pointer value being dereferenced. Target memory bytes 
+	corresponding to the size of the enclosing type are retreived.
+	(value_addr): Handle enclosing_type and pointed_to_offset.
+	(value_push): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE.
+	(value_arg_coerce): Coerce floats to doubles only if gcc was not
+	used to compile the target.
+	(call_function_by_hand): Handle pointers to functions as paramters.
+	(value_array): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE.
+	(search_struct_method): Produce more informative error message.
+	(find_rt_vbase_offset): Deal with negative offsets.
+	(value_find_oload_method_list): New function. Return the list of 
+	overloaded methods of a specified name.
+	(find_method_list): New function. Search through the methods of an 
+	object (and its bases) to find a specified method.
+	(value_full_object): New function. Given a value, check its real 
+	run-time type.
+	(value_rtti_target_type): New function. Given a pointer value V, find 
+	the real (RTTI) type of the object it points to.
+	(value_rtti_type): New function. Find the real run-time type of a 
+	value using RTTI.
+
+	* valops.c: Include gdbcmd.h
+	Set global overload_resolution to 0.
+	(find_function_in_inferior): Modify error message.
+	(value_allocate_space_in_inferior): Modify error message.
+	(value_cast): Deal with HP/aCC peculiarities.
+	(value_of_variable): Use SYMBOL_SOURCE_NAME instead of SYMBOL_NAME.
+	(value_addr): Modify address value by adding the embedded offset.
+	(value_ind): Modify the address of the object by the pointed_to_offset.
+	(call_function_by_hand): Do not do any extra alignment if not needed.
+	Fetch the return value from the stack rather then from the register, 
+	for the hppa architecture.
+	(search_struct_field): Rewritten. Now this function uses 
+	search_struct_field_aux to do all the work.
+	(search_struct_field_aux): New function. This is the old 
+	search_struct_field rewritten.
+	(find_rt_vbase_offset): Give error if virtual table pointer is not good.
+	(find_overload_match): New function. Find the best function that
+	matches on the argument types according to the overload resolution
+	rules.
+	(_initialize_valops): Add new set/show command for overload-resolution.
+	
+	* value.h (VALUE_POINTED_TO_OFFSET): New macro.
+	Add field pointed_to_offset to value structure.
+	Add prototypes for new functions in valops.c.
+
+	* value.h (write_register_pid): Change prototype to match
+	function.
+
+	* value.h: Hp merge, 4/15/98 snapshot
+	  Added parameter to val_print func decl.
+	  Added new macro, VALUE_EMBEDDED_OFFSET, and
+	  new func decl, find_rt_vbase_offset, for C++
+	  support.
+	
+	* values.c (allocate_value): Allocate also for value_embedded_offset 
+	and value_enclosing_type.
+	(value_copy): Copy value_embedded_offset and value_enclosing_type too.
+	Use all_raw in copying the value itself.
+	(value_primitive_field): Add handling of base subobjects.
+
+	* values.c (value_copy): Copy the pointed_to_offset as well.
+	(allocate_value): Allocate the pointed_to_offset as well.
+	(value_virtual_fn_field): Rewrite.
+
+	* values.c (value_primitive_field): Adjust embedded offset and
+	offset calculation.
+
+	* values.c (value_static_field): Take into consideration that static 
+	data members can be minimal symbols too.
+
+	* values.c (value_virtual_fn_field): Fix call to value_at.
+
+	* win32-nat.c (handle_load_dll): Added params to call to symbol_file_add.
+
+	Other changes have to do with XDB compatability. Leave oout
+	for now.
+
+	defs.h (vfprintf_filtered): Change FILE to GDB_FILE in decl.
+	(fprintf_filtered): Ditto.
+	(fprintfi_filtered): Ditto.
+	(vfprintf_unfiltered): Ditto.
+	(fprintf_unfiltered): Ditto.
+
+	infcmd.c (_initialize_infcmd): If xdb_commands is set, make S an
+	alias for next and define R, lr, g.  Define go.
+	 
+	pyr-tdep.c (pyr_print_insn): Change FILE to GDB_FILE.
+
+
+	* breakpoint.c (create_temp_exception_breakpoint): #If it out --
+ 	nothing calls it.
+	(bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not
+ 	defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined.
+	(bpstat_get_triggered_catchpoints): If we don't have shared
+ 	library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor
+ 	SOLIB_UNLOADED_LIBRARY_PATHNAME.
+	(watch_command_1): Don't require a run before a watch command
+ 	unless we're on HP [it's an HP OS bug, not a generic limitation]
+	(catch_load_command_1): Don't define if no shared libraries.
+	(catch_command_1): Don't claim to support fork catchpoints unless
+ 	CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support
+ 	vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined,
+ 	don't clain to support shared library load catchpoints if shared
+ 	libraries aren't supported, and don't claim to support exec
+ 	catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined
+
+	  There are new target_ops vector fields that pertain
+	  only to HPUX. Added the to_require_attach and 
+	  to_require_detach fields to exec_ops. These new
+ 	  fields are ifdef'ed for HPUX_SNAP1.
+
+	* breakpoint.h:
+	    Fix compile error in enum bptype.
+
+	* coff-solib.h:
+	    Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME,
+	    SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, 
+	    SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These
+	    macros are only meaningful (for now) for SOM. So, all 
+	    the macros were defined as error(...), but were used in
+	    conditions. This caused the compile to crap out. I redefined 
+	    these (for now) to be 0. 
+
+	* procfs.c:
+	    (procfs_create_inferior): Fix call to fork_inferior -- need another
+	       parameter. 
+	
+	* solib.h:
+	    Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME,
+	    SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, 
+	    SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These
+	    macros are only meaningful (for now) for SOM. So, all 
+	    the macros were defined as error(...), but were used in
+	    conditions. This caused the compile to crap out. I redefined 
+	    these (for now) to be 0. 
+
+	* valops.c:
+	    (search_struct_field): Undeclared local variable, "assigned".
+	    (find_rt_vbase_offset): Fixed call to value_at
+
+	* value.h: Fix signature for find_rt_vbase_offset funct decl
+ 	(missing a param)
+
+Wed Dec 30 17:48:12 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From J.T. Conklin  <jtc@redbacknetworks.com>:
+	* i386-stub.c: Fix error string in last change.
+
+1998-12-30  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* utils.c: <Readline/readline.h> instead of "readline/readline.h".
+
+	* configure.in (TERM_LIB): Search for the appropriate term library
+	on the host system.
+	* configure: Regenerated.
+	* Makefile.in (TERMCAP): Set based on autoconf check.
+	* config/*/*.mh: Don't override TERMCAP setting.
+
+Wed Dec 30 17:23:14 1998  Mark Alexander  <marka@cygnus.com>
+
+	* value.c (value_virtual_fn_field): Handle the situation where
+	vtbl is a pointer to a structure instead of a pointer to an array.
+
+Mon Dec 28 17:43:36 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Jim Blandy <jimb@cygnus.com>,
+ 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
+ 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
+ 	Taylor <taylor@cygnus.com>, as part of the project to merge in
+ 	changes originally made by HP; HP did not create ChangeLog
+ 	entries.
+
+	* c-lang.h (cp_print_value_fields): Update prototype; fixed
+ 	prototype decl for c_val_print function -- it needed an
+ 	embedded_offset param; fixed prototype of cp_print_value_fields.
+	Include value.h.
+	(C_LANG_H): Define.
+
+	* c-valprint.c (c_val_print): Add new parameter embedded_offset.
+  	Add embedded_offset to valaddr in function calls.  fix calls to
+ 	val_print, and cp_print_value_fields.  Attempt to determine the
+ 	real type of the object to be printed.  fixed call to
+ 	cp_print_value_fields.  process TYPE_CODE_METHOD as well.  moved
+ 	call to check_typedef out of conditional.  add embedded offset
+ 	param to val_print call.
+
+	(c_value_print): Add new parameter to call to val_print.  Handle
+ 	pointer to class case.  Ensure that const char *, const unsigned
+ 	char * come out without the type but the volatile variants and the
+ 	signed variants don't.
+	
+	* ch-lang.h (chill_val_print): Add parameter to decl.
+
+	* ch-valprint.c: The various print routines have an additional
+ 	parameter. Currently, the new parameter is only used when printing
+ 	C++ expressions. So, in ch-valprint.c, the new parameter is always
+ 	0.  Changes in calls to val_print, chill_val_print, c_val_print
+ 	Affected functions are chill_val_print_array_elements,
+ 	chill_val_print, chill_print_value_fields, chill_value_print.
+
+	* cp-valprint.c add vtable pointers names for aCC (HP) compiler.
+ 	(cp_print_class_method): Print message for HP/aCC case.
+	(cp_print_class_member): Add comments.
+	(cp_print_value): Adjust address computations for virtual base
+ 	classes.  add new parameter 'offset'.  Find correct offset for
+ 	base class in HP/aCC case.  Change call to cp_print_value_fields
+ 	to have extra par.
+	(cp_print_value_fields): Do not print also if the only field is
+ 	the vtable pointer.  Print out vtable ptr, for HP/aCC compiled
+ 	case.  do not print leading '=' in case of anonymous union, or
+ 	struct.  add new parameter 'offset'.  Do not print the vtable
+ 	pointer as a member, in the HP aCC case.  Changed calls to
+ 	val_print to have extra parameter.
+	(cp_print_hpacc_virtual_table_entries): New function. Print vtable
+ 	entries, in HP/aCC compiled case.
+	(cp_print_static_field): Change call to cp_print_value_fields, and
+ 	val_print.
+
+	* d30v-tdep.c (d30v_print_register): Add embedded_offset param
+	to val_print call.
+
+	* defs.h: Additional include files included when TUI is defined.
+	(gdb_file_isatty): New function decl.
+	(GDB_FILE): If TUI is defined, define a structure rather
+ 	than making this an alias for FILE.
+	(gdb_stdout, gdb_stderr): If TUI is defined, then define these
+	as pointers to variables of type GDB_FILE rather than making them
+	be aliases for stdout and stderr.
+	(TUIDO): Add definition conditionalized on definition
+	(or lack thereof) of TUI.
+	(command_class): Add two additional values.
+	(precision_type): New enum.
+	(gdb_fclose): Add decl.
+	(store_address): Change prototype to match function.
+	(tui_version, xdb_commands, dbx_commands): Add decls.
+	(gdb_file_deallocate): New function decl
+	(pa_do_strcat_registers_info): New function decl.
+	(streamtype): New enumerated type to distinguish between output to
+ 	a FILE and output to a buffer.
+	(tui_stream): New struct type, named GDB_FILE.
+	(gdb_stdout): Of type GDB_FILE, will pass this around gdb rather
+ 	than stdout.
+	(gdb_stderr): Of type GDB_FILE, will pass this around gdb rather
+ 	than stderr.
+	(fputs_unfiltered_hook): Change stream parameter from FILE to
+ 	GDB_FILE.
+	(flush_hook): Change stream parameter from FILE to GDB_FILE.
+	(gdb_fclose): Fix decl for gdb_fclose; parameter is now of
+ 	type GDB_FILE **.
+	(gdb_file_adjust_strbuf): New function decl. function lives
+ 	in utils.c.
+	(gdb_file_init_astring): New function decl. function lives
+ 	in utils.c.
+	(gdb_file_get_strbuf): New function decl. function lives in
+ 	utils.c.
+	(source_full_path_of): Declare.
+
+	* exec.c (_initialize_exec): Make definition of file command be
+	dependent upon dbx_commands not being set.
+	(exec_file_attach): New function.
+	(exec_file_command): Call it.
+	(exec_ops): Add new target vector fields.
+
+	* f-lang.h (f_print_type): Change FILE to GDB_FILE in decl.
+	(f_val_print): Ditto.
+	(f_val_print): Add parameter to the function decl.
+
+	* f-valprint.c (_initialize_f_valprint): If xdb_commands is set,
+	define lc command.
+	(f77_create_arrayprint_offset_tbl): Change FILE to GDB_FILE.
+	(f77_print_array): Ditto.
+	(f77_print_array_1): Ditto.
+	(f_val_print): Ditto.
+	(f_val_print): Add a parameter; this new parameter is currently
+ 	only non-zero when handling C++ expressions.  In this file its
+ 	value is always 0.  changed fflush to gdb_flush.
+
+	* gnu-nat.c: (init_gnu_ops): Add new target vector fields.
+	(gnu_create_inferior): Add param to fork_inferior call.
+
+	* hppa-tdep.c (after_prologue): If f is NULL, don't dereference
+ 	it.  if no debug info, return zero telling caller that we need to
+ 	find the end of the prologue via the hard way (instruction
+ 	examination).
+	(find_unwind_entry): Avoid dereferencing a null
+	pointer.
+	(hppa_pid_to_exec_file): Deleted -- no longer used.
+	(hppa_prepare_to_proceeed): Add prototype.
+	(read_unwind_info): Purecov comments, bug fixes.
+	(find_unwind_entry): Purecov comments, bug fixes.
+	(find_stub_with_shl_get): Purecov comments.
+	(frame_chain): Additional parens.
+	(hppa_push_arguments): Changes to commented out version of routine.
+	(hppa_fix_call_dummy): Purecov comments, fix location of end.o.
+	(in_solib_call_trampoline): Purecov comments.
+	(in_solib_return_trampoline): Purecov comments.
+	(setup_d_pid_in_inferior): Fix location of end.o.
+	(initialize_hp_cxx_exception_support): Fix location of end.o.
+	(child_enable_exception_callback): Purecov comments.
+	(pa_do_strcat_registers_info): Has a new parameter, precision, 
+	which is passed into the call to pa_strcat_fp_reg to indicate
+	whether to display the floating point registers using 
+	single or double preceision.
+	(pa_strcat_registers): Introduce local variable, precision, and 
+	pass it into call to pa_strcat_fp_reg.
+	(pa_strcat_fp_reg): Modified function. New parameter, precision,
+	used by function to decide whether to use single or double
+	precision. Also add the code to put a double precision value
+	into a buffer.
+	(pa_do_strcat_registers_info): New routine. called by 
+	tui/tuiRegs.c:_tuiRegisterFormat to place a register name 
+	and value into a string buffer. Interface may change in
+	future. Checking this in so that we have something 
+	functional for HP.
+	(pa_strcat_registers): New routine, called by 
+	pa_do_strcat_registers_info. Does same thing as 
+	pa_print_registers except it takes a stream parameter. 
+	This routine should disappear in future. Checking in
+	so that we have something functional to give HP
+	(pa_strcat_fp_reg): New routine, called by 
+	pa_do_strcat_registers_info and pa_strvat_registers
+	to place a floating point register name and value into
+	a buffer. This interface may change in future. 
+	Checking in so that we have something functional to give HP.
+	(pa_print_fp_reg): Change prototype to match def'n.
+	(pa_register_look_aside): Fix comment immediately before function.
+	Changes to better support stack unwinding, reading and writing
+ 	registers for HPUX.  New includes ptrace.h, bfd.h, dl.h.
+	(internalize_unwinds): Initialize new fields in table.
+	(read_unwind_info): Entries in the table are now more complex
+ 	structures. References of the form ...->table[index].stub_type are
+ 	now ...->table[index].stub_unwind.stub_type.
+	(find_proc_framesize): Add a check for pc == 0.
+	(rp_saved): Entries in the table are now more complex
+ 	structures. References of the form ...->table[index].stub_type are
+ 	now ...->table[index].stub_unwind.stub_type.
+	(frameless_function_invocation): Stub_type becomes
+ 	stub_unwind.stub_type
+	(saved_pc_after_call): Stub_type becomes stub_unwind.stub_type
+	(hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type
+	(frame_chain_valid): Stub_type becomes stub_unwind.stub_type
+	(hppa_call_dummy): Stub_type becomes stub_unwind.stub_type
+	(pa_print_fp_reg): Additional params to call val_print
+	(in_solib_call_trampoline): Stub_type becomes
+ 	stub_unwind.stub_type
+	(in_solib_return_trampoline): Stub_type becomes
+ 	stub_unwind.stub_typ
+	(skip_trampoline_code): Additional code to handle external
+ 	dyncalls. Also stub_type becomes stub_unwind.stub_type
+	(hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there
+ 	is an explicit ptrace request for getting the pathname associated
+ 	with a process id (pid).
+	(hppa_pid_to_exec_file): Remove unwanted param from call to
+ 	call_ptrace.
+	(args_for_find_stub): New structure.
+	(find_unwind_entry): Deal with null input pc value.
+	(rp_saved): Ditto.
+	For the import stub, return -24 always.
+	(hppa_frame_saved_pc): Save old pc value, to detect we are in a loop.
+	(init_extra_frame_info): Use TARGET_READ_FP.
+	(frame_chain): Include thread support.
+	If the caller's pc is zero, we lose and return, just like stack
+	bottom.
+	Disable warning about being unable to find unwind info.
+	(hppa_push_arguments): Rewrite.
+	(hppa_value_returned_from_stack): New function. Handles returning
+ 	a value larger than 64 bits, stored on the stack.
+	(find_stub_with_shl_get): New function. To look up symbols in shlibs.
+	(cover_find_stub_with_shl_get): New function. Cover routine for 
+	find_stub_with_shl_get to pass to catch_errors.
+	(hppa_fix_call_dummy): Comment out old stub mechanism.
+	Rewrite using dyncall.
+	(target_read_fp): New function.
+	(pa_do_registers_info): Floating point registers start at FP4.
+	(pa_print_registers): Use FP4_REGNUM instead of 72.
+	(skip_trampoline_code): Do machine instruction matching for PA2.0.
+	(setup_d_pid_in_inferior): New function. Exception handling support.
+	(initialize_hp_cxx_exception_support): Ditto.
+	(child_enable_exception_callback): Ditto.
+	(child_get_current_exception_event): Ditto.
+
+	* hpux-thread.c (hpux_thread_ops): Add new target vector fields.
+
+	* infcmd.c: Include objfiles.h.
+	(attach_command): New local variable, exec_file, add code to
+ 	determine exec_file from pid if exec_file is not already known,
+	call new target operation, target_post_attach -- a no-op unless
+	on HPUXHPPA.
+	(detach_command): After detaching, do a SOLIB_RESTART.
+	(objfiles.h): Fix typo on include line.
+	(run_command): Only call SOLIB_RESTART if it's defined.
+	(detach_command): Ditto.
+	(run_command): If program has already been started, and decide
+	to restart it, the kill the target, flush the caches, 
+	call init_wait_for_inferior. Also purge old solib objfiles.
+	(run_stack_dummy): Add calls to
+ 	disable_watchpoints_before_interactive_call_start and
+ 	enable_watchpoints_after_interactive_call_stops.
+	(finish_command): Alter code handling the evaluation and printing
+ 	of the target function's return value.
+	(attach_command): When given a pid, but no exec file, try to
+ 	determine the exec file from the process. If the process does not
+ 	record a full path name, try to qualify the filename against the
+ 	source path.
+	(_initialize_infcmd): Add some verbiage about how to use the
+ 	attach command.
+	(do_registers_info): Changed calls to val_print
+	made the symfile.h include preceed the 
+	objfiles.h include. The other ordering caused a 
+	compile problem (incompletely defined types).
+
+	* inftarg.c (child_post_attach): Fix decl, make static.
+	(proc_wait): Make globally visible.
+	(child_insert_fork_catchpoint, etc): Fix return type.
+	(child_detach_from_process): Declare.
+	(child_attach_to_process): Declare.
+	(child_stop): Make static to match decl.
+	(ptrace_him): Change prototype back to return int. 
+	(ptrace_me): Remove debug output, pass NULL to fork_inferior if
+ 	not HPUX.
+	(proc_wait): function prototype and definition are enclosed by
+ 	proc_wait ifndef
+	(child_attach_to_process): New function, does most of the work
+ 	that child_attach used to do and some additional work to determine
+ 	whether gdb is already attached to the target how to react.
+	(child_attach): Altered. It's now a wrapper for
+ 	child_attach_to_process.
+	(child_require_attach): New function, called if should attach even
+ 	when gdb is already attached to target.
+	(child_detach_from_process): New function, does most of the work
+ 	that child_detach used to do and some additional work to determine
+ 	whether gdb is currently attached to the target.
+	(child_detach): Altered. It's now a wrapper for
+ 	child_detach_from_process.
+	(child_require_detach): New function, called if should try to
+ 	detach even when gdb is not attached to target.
+	(ptrace_him): Calls a new function,
+ 	target_acknowledge_forked_child.  Currently,
+ 	target_acknowledge_forked_child, is only defined to do something
+ 	for HPUX.
+	(child_create_inferior): Changed call to fork_inferior.
+	(child_ops): Add to_require_attach and to_require_detach fields
+ 	to the child_ops target ops vector.
+	Some hacks for ttrace work:
+	(child_wait): Additional local variables, additional code in
+	while loop to check for process exited, process forked, 
+	process vforked, process execd.
+	(child_thread_alive): John B. seems to think that the kill 
+	call is inapproapriate for HPUX.
+	(child_attach_to_process): Using strtol rather than atoi.
+	no longer check for case where there is no known exec file.
+	(child_post_attach): New function, a default, a no-op.
+ 	(child_insert_fork_catchpoint): New function, a default, a no-op.
+	(child_remove_fork_catchpoint): New function, a default, a no-op.
+	(child_insert_vfork_catchpoint): New function, a default, a no-op.
+	(child_remove_vfork_catchpoint): New function, a default, a no-op.
+	(child_can_follow_vfork_prior_to_exec ):new function, a default, 
+ 	a no-op.
+	(child_insert_exec_catchpoint): New function, a default, a no-op.
+	(child_remove_exec_catchpoint): New function, a default, a no-op.
+	(child_has_execd): New function, a default, returns 0.
+	(child_reported_exec_events_per_exec_call): New function, a 
+ 	default, returns 1.
+	(child_has_exited): New function, a default.
+	(child_core_file_to_sym_file): New function, a default, returns NULL.
+	(child_ops): Initialize new target vector fields.
+
+	* jv-lang.h: (Java_val_print): Add embedded_offset param to func
+ 	decl.
+
+	* jv-valprint.c: Changing calls to val_print to accomodate new param.
+	(java_value_print): Add embedded_offset param to val_print call
+	(java_print_value_fields): Add embedded_offset param to val_print
+	call.
+	(java_val_print): Add embedded_offset param. alter call to 
+	c_val_print to accomodate embedded_offset param.
+
+	* language.c (lang_bool_type): Return builtin_type_bool in c++
+	case.
+	(unk_lang_val_print): Add embedded_offset param to 
+	prototype decl and definition.
+
+	* language.h (LA_VAL_PRINT macro, la_val_print function decl):
+ 	altered to accomodate the new parameter to the various print
+ 	functions.
+	
+	* m2-lang.h (m2_val_print): Add a parameter to the function decl.
+
+	* m2-valprint.c (m2_val_print): Add a parameter.
+	This parameter is currently only used when evaluating C++
+ 	expressions. So, it is always 0 in this file.
+
+	* m3-nat.c (m3_create_inferior): Add param to fork_inferior call
+	(m3_pid_to_exec_file): New function
+	(m3_ops): Add new target vector fields.
+
+	* mac-nat.c (init_child_ops): Add new target vector fields.
+
+	* mips-tdep.c: Chnages to accomodate additional parameter
+	to val_print.
+	(mips_print_register): Alter calls to val_print
+
+	* monitor.c (monitor_write): Change stderr to gdb_stderr.
+	(monitor_remove_breakpoint): Ditto.
+	(init_base_monitor_ops): Add new target vector fields.
+
+	* ppc-bdm.c (init_bdm_ppc_ops): Add new target vector fields.
+	
+	* printcmd.c (do_examine): When saving a value_ptr, remove it from
+ 	the list of value_ptr's to be freed automatically; when discarding
+ 	a previously saved value_ptr, free it.
+	(print_formatted): Update comments; add new comments.
+	(printf_command, print_insn): Purecov comments.
+	(_initialize_printcmd): Add assign as a command if dbx_commands is
+ 	set; create va as an alias for disassemble if xdb_commands is set.
+	(address_info): New cases LOC_INDIRECT and
+ 	LOC_THREAD_LOCAL_STATIC.
+	(display_command): If tui_version and exp starts with a '$', then
+ 	don't display it unless tui_vSetLayoutTo fails.
+	(disassemble_command): Add tuiDo calls.
+	(print_scalar_formatted): For integers that are long long, check
+ 	the print format and print out in binary octal, decimal, or
+ 	hex. Call the new print_*_chars functions in valprint.c
+	(print_frame_args): Altered calls to val_print, to reflect
+ 	additional parameter to val_print (case LOC_BASEREG_ARG).
+
+	* procfs.c: (Procfs_init_inferior): Return value is now a void.
+	(procfs_ops): Add new target vector fields.
+	(procfs_create_inferior): Fix call to fork_inferior -- need another
+	parameter. 
+
+	* remote-adapt.c (adapt_open): Change stderr to gdb_stderr.
+	(adpat_insert_breakpoint): Ditto.
+	(init_adapt_ops): Add new target vector fields.
+
+	* remote-array.c (array_wait): Change fflush to gdb_flush and
+ 	stdout to gdb_stdout.
+	(init_array_ops): Add new target vector fields.
+
+	* remote-bug.c (bug_load): Change fflush to gdb_flush; stdout to
+ 	gdb_stdout.
+	(bug_wait): Change stderr to gdb_stderr.
+	(bug_insert_breakpoint): Ditto.
+	(init_bug_ops): Add new target vector fields.
+
+	* remote-e7000.c
+	(init_e7000_ops): Add new target vector fields.
+	* remote-eb.c (init_eb_ops): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	* remote-hms.c (init_hms_ops):  Ditto.
+	* remote-hms.c (init_hms_ops): Ditto.
+	* remote-nindy.c (init_nindy_ops): Ditto.
+	* remote-nrom.c	(init_nrom_ops): Ditto.
+	* remote-os9k.c (init_rombug_ops): Ditto.
+	* remote-rdp.c (init_remote_rdp_ops): Ditto.
+	* remote-sds.c (init_sds_ops): Ditto.
+	* remote-sim.c (init_gdbsim_ops): Ditto.
+	* remote-st.c (init_st2000_ops): Ditto.
+	* remote-udi.c (init_udi_ops): Ditto.
+	* remote-vx.c (init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+	* remote-vx.c: (Init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+
+	* remote-mips.c (mips_getstring): Change stderr to gdb_stderr.
+	(pmon_insert_breakpoint): Ditto.
+	(pmon_remove_breakpoint): Ditto.
+	(check_lsi_error): Ditto.
+	(common_breakpoint): Ditto.
+	(pmon_makeb64): Ditto.
+
+	* remote-mips.c (mips_xfer_memory): Change fflush to gdb_flush;
+	change stdout to gdb_stdout.
+
+	* remote-mm.c (mm_open): Change stderr to gdb_stderr.
+	(init_mm_ops): Add new target vector fields.
+	(mm_load): Fixed params in commented out call to symbol_file_add.
+
+	* remote-nindy.c (instream): Change decl to FILE.
+
+	* remote-udi.c (udi_load): Fixed params in call to symbol_file_add.
+
+	* remote-vx.c (vx_add_symbols): Fixed params in call to
+ 	symbol_file_add.
+
+	* remote.c (init_remote_ops): Cosmetic change to match expected
+	test output.
+
+	* rs6000-nat.c (add_vmap): Add params to call to allocate_objfile.
+
+	* scm-lang.h:  Add parameter to scm_val_print function decl.
+
+	* scm-valprint.c (scm_scmval_print): Cast svalue to (int); new
+ 	parameter.  This parameter is currently only used when evaluating
+ 	C++ expressions. So, it is always 0 in this file.
+	(c_val_print): Fixed prototype decl; it needed an embedded_offset
+ 	param.
+
+	* sol-thread.c (sol_core_ops): Add new target vector fields.
+	(sol_thread_ops): Ditto.
+	
+	* somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. 
+	Define bit of __dld_flags in HP-UX a.out files.
+	(DLD_FLAGS_HOOKVALID): Ditto.
+	(DLD_FLAGS_LISTVALID): Ditto.
+	(DLD_FLAGS_BOR_ENABLE): Ditto.
+	(som_solib_total_st_size): Cumulative size in bytes of the 
+	symbol tables of all shared objects on the so_list_head list.
+	(som_solib_st_size_threshhold_exceeded): Threshold for adding symbols
+	for shlibs.
+	(som_solib_sizeof_symbol_table): New function. Computes size of 
+	symbol table for a shlib.
+	(som_solib_load_symbols): New function. Load symbols from shlib.
+	(som_solib_add): Detect if __dld_list is not valid. 
+	Record main program's symbol table size.
+	Load symbols if called from command line.
+	Keep threshold into account when loading shlib symbols.
+	(som_solib_create_inferior_hook): Use dld_flags macros.
+	(som_sharedlibrary_info_command): Let user know if symbols were 
+	not loaded.
+	(som_solib_restart): Discard all the shlibs descriptors.
+	(_initialize_som_solib): Chenge help message for auto-solib-add
+	command.
+	Set threshold for symbol table to 50 megabytes.
+	(_initialize_som_solib): Add call to som_solib_restart.
+	(som_solib_restart): New function
+	(som_solib_in_dynamic_linker): New function
+	(som_solib_desire_dynamic_linker_symbols): New function
+	(som_solib_unloaded_library_pathname): New function
+	(som_solib_loaded_library_pathname): New function
+	(som_solib_library_pathname): New function
+	(som_solib_have_unload_event): New function
+	(som_solib_have_load_event): New function
+	(som_solib_create_catch_unload_hook): New function
+	(som_solib_create_catch_load_hook): New function
+	(som_solib_create_inferior_hook): Rewritten
+	dld_cache: New struct
+	addr_and_unwind_t: New struct
+	(find_unwind_entry) add prototype
+	Include assert.h, remove references to ASSERT macro,
+	add include of fcntl.h so that O_RDONLY is defined.
+	(som_solib_create_inferior_hook): Introduce new local
+ 	msymbol2 and change some msymbol's to msymbol2's -- was clobbering
+ 	msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline,
+	and ultimately core dumping with a SEGV.
+	(som_solib_mapped_entry): Additional comments for text_addr, 
+	text_link_addr, text_end, and tsd_start_addr fields. Commenting
+	out 2 tsd fields, __data_start and __data_end. 
+	(som_solib_add_solib_objfile): Add params to calls to symbol_file_add.
+	Add some code for distinguishing between a shared library and other 
+	objfiles. This appears to be a prelude to thread local storage.	
+	(som_solib_load_symbols): Changes to printf statement 
+	enclosed by SOLIB_DEBUG ifdef.
+	(som_solib_add): Change comment to correctly specify path
+	to end.o -- /opt/langtools/lib/end.o. changes to printf statement
+ 	enclosed by SOLIB_DEBUG ifdef.
+	Removed several SOLIB_DEBUG ifdefs and the associated printfs.
+	Add code to find the start address for the object file's thread 
+	local storage
+	(som_solib_create_inferior_hook): Fix warning messages use correct
+	path to end.o -- /opt/langtools/lib/end.o. Change control flow. 
+	No longer user early returns from function is cases of error.
+	(reset_inferior_pid): New function
+	(som_solib_remove_inferior_hook): New function
+	(so_lib_thread_start_addr): New function. used for tsd.
+	(struct som_solib_mapped_entry): Add new field tsd_start_addr.
+	(struct so_list): Add new field solib_addr.
+	(som_solib_add_solib_objfile): New function. 
+	(som_solib_load_symbols): Rewritten.
+	(som_solib_add): Make sure we don't load the symbols in if the 
+	threshold was exceeded.
+	(som_solib_get_solib_by_pc): New function. Return the address of
+ 	handle of the shared library.
+	(som_solib_restart): Disable breakpoints at restart.
+
+	* sparcl-tdep.c (init_sparclite_ops): Add new target vector fields.
+
+	* target.c (cleanup_target): Changed casting of default functions
+ 	for to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid
+ 	of warnings.  Fixed PARAMS for to_has_syscall_event.  Fixed the
+ 	return type on a few of the default function values.
+	(cleanup_target): Changes in the de_fault macro, both to
+	accomodate the new target_ops vector fields and to use
+	more accurate default functions.
+	(debug_to_open): Change stderr to gdb_stderr.
+	(debug_to_close): Ditto.
+	(debug_to_attach): Ditto.
+	(debug_to_post_attach): Ditto.
+	(debug_to_require_attach): Ditto.
+	(debug_to_detach): Ditto.
+	(debug_to_require_detach): Ditto.
+	(debug_to_resume): Ditto.
+	(debug_to_wait): Ditto.
+	(debug_to_post_wait): Ditto.
+	(debug_to_fetch_registers): Ditto.
+	(debug_to_store_registers): Ditto.
+	(debug_to_prepare_to_store): Ditto.
+	(debug_to_xfer_memory): Ditto.
+	(debug_to_files_info): Ditto.
+	(debug_to_insert_breakpoint): Ditto.
+	(debug_to_remove_breakpoint): Ditto.
+	(debug_to_terminal_init): Ditto.
+	(debug_to_terminal_inferior): Ditto.
+	(debug_to_terminal_ours_for_output): Ditto.
+	(debug_to_terminal_ours): Ditto.
+	(debug_to_terminal_info): Ditto.
+	(debug_to_kill): Ditto.
+	(debug_to_load): Ditto.
+	(debug_to_lookup_symbol): Ditto.
+	(debug_to_create_inferior): Ditto.
+	(debug_to_post_startup_inferior): Ditto.
+	(debug_to_acknowledge_created_inferior): Ditto.
+	(debug_to_clone_and_follow_inferior): Ditto.
+	(debug_to_post_follow_inferior_by_clone): Ditto.
+	(debug_to_insert_fork_catchpoint): Ditto.
+	(debug_to_remove_fork_catchpoint): Ditto.
+	(debug_to_insert_vfork_catchpoint): Ditto.
+	(debug_to_remove_vfork_catchpoint): Ditto.
+	(debug_to_has_forked): Ditto.
+	(debug_to_has_vforked): Ditto.
+	(debug_to_can_follow_vfork_prior_to_exec): Ditto.
+	(debug_to_post_follow_vfork): Ditto.
+	(debug_to_insert_exec_catchpoint): Ditto.
+	(debug_to_remove_exec_catchpoint): Ditto.
+	(debug_to_has_execd): Ditto.
+	(debug_to_reported_exec_events_per_exec_call): Ditto.
+	(debug_to_has_syscall_event): Ditto.
+	(debug_to_has_exited): Ditto.
+	(debug_to_mourn_inferior): Ditto.
+	(debug_to_can_run): Ditto.
+	(debug_to_notice_signals): Ditto.
+	(debug_to_thread_alive): Ditto.
+	(debug_to_stop): Ditto.
+	(debug_to_enable_exception_callback): Ditto.
+	(debug_to_get_current_exception_event): Ditto.
+	(debug_to_pid_to_exec_file): Ditto.
+	(debug_to_core_file_to_sym_file): Ditto.
+	(default_clone_and_follow_inferior): New function prototype
+ 	decl and function definition.
+	(dummy_target): Add new target_ops vector fields and their
+ 	initializations.  More target_ops vector changes for HPUX new
+ 	fields.
+	(de_fault): Add new HPUX specific target_ops operations to the
+	de_fault macro
+	(INHERIT): Add new HPUX specific target_ops operations.
+	(debug_to_post_wait): New function.
+	(debug_to_post_startup_inferior): Ditto.
+	(debug_to_acknowledge_created_inferior): Ditto.
+	(debug_to_clone_and_follow_inferior): Ditto.
+	(debug_to_post_follow_inferior_by_clone): Ditto.
+	(debug_to_create_catch_fork_hook): Ditto.
+	(debug_to_create_catch_vfork_hook): Ditto.
+	(debug_to_has_forked): Ditto.
+	(debug_to_has_vforked): Ditto.
+	(debug_to_post_follow_vfork): Ditto.
+	(setup_target_debug): Initialize new target_ops vector fields.
+	(nosupport_runtime): New function, used in cleanup_target
+	(update_current_target): Add new new target_ops vector fields to
+	the INHERIT macro definition.
+	(generic_mourn_inferior): The call to breakpoint_init_inferior now
+ 	takes a parameter.
+	(normal_pid_to_str): Add a \0 to the end of buf.
+	(debug_to_has_syscall_event): New function.
+	(debug_to_enable_exception_callback): New function.
+	(debug_to_get_current_exception_event): New function.
+	(setup_target_debug): Initialize the 3 new target_ops vector fields
+	(struct signals): Fix message associated with SIGRETRACT.
+	(return_one): New function, used by the de_fault macro
+	(debug_to_post_attach): New function.
+	(debug_to_wait): Add new cases TARGET_WAITKIND_FORKED,
+	TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD.
+	(debug_to_insert_fork_catchpoint): New function.
+	(debug_to_remove_fork_catchpoint): Ditto.
+	(debug_to_insert_vfork_catchpoint): Ditto.
+	(debug_to_remove_vfork_catchpoint): Ditto.
+	(debug_to_can_follow_vfork_prior_to_exec): Ditto.
+	(debug_to_insert_exec_catchpoint): Ditto.
+	(debug_to_remove_exec_catchpoint): Ditto.
+	(debug_to_core_file_to_sym_file): Ditto.
+	(setup_target_debug): Give new fields in current_target target_ops
+ 	vector values.
+
+	* target.h: Include symtab.h.
+	(target_waitkind): New enumerated values
+	TARGET_WAITKIND_SYSCALL_ENTRY, TARGET_WAITKIND_SYSCALL_RETURN,
+	TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, 
+	TARGET_WAITKIND_EXECD.
+	(target_waitstatus): Add a syscall_id field to structure.
+	(child_has_syscall_event): New decl.
+	(child_thread_alive): New decl.
+	(target_ops): Add 3 new fields: To_has_syscall_event,
+	to_enable_exception_callback, to_get_current_exception_event 
+	(target_enable_exception_callback): New macro.
+	(target_has_syscall_event): New macro. 
+	(target_get_current_exception_event): New macro.
+	(TARGET_DISABLE_HW_WATCHPOINTS): New macro.
+	(TARGET_ENABLE_HW_WATCHPOINTS): New macro.
+	(PC_REQUIRES_RUN_BEFORE_USE): New macro.
+	(target_tid_to_str): New macro.
+	(target_waitstatus): Additional fields in struct to keep track
+	of child pid and pathname to execd file.
+	(target_ops): Add in the new target_ops function pointer fields.
+	New macros to go along with new target_ops fields.
+	In target_waitstatus.value, change name of child_pid field to
+	related_pid.
+	(target_pid_or_tid_to_str): Define default macro.
+	Add missing #endif after PC_REQUIRES_RUN_BEFORE_USE definition
+	(ENSURE_VFORKING_PARENT_REMAINS_STOPPED): Define default macro.
+	(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): Define default
+	macro.
+	There are new function decls for to_require_attach
+	and to_require_detach. There are also new macros, 
+	target_require_attach and target_require_detach. There are
+	also new function decls for find_default_require_detach
+	and find_default_require_attach.
+	(target_ops): New fields to_post_wait, to_post_startup_inferior
+ 	to_acknowledge_created_inferior, to_clone_and_follow_inferior,
+ 	to_post_follow_inferior_by_clone, to_create_catch_fork_hook,
+ 	to_create_catch_vfork_hook, to_has_forked, to_has_vforked,
+ 	to_post_follow_vfork, to_pid_to_exec_file.
+	New function definitions child_pid_to_exec_file, child_post_wait,
+ 	child_post_startup_inferior, child_acknowledge_created_inferior,
+ 	child_clone_and_follow_inferior,
+ 	child_post_follow_inferior_by_clone, child_create_catch_fork_hook,
+ 	child_create_catch_vfork_hook, child_has_forked,
+ 	child_has_vforked, child_acknowledge_created_inferior,
+ 	child_post_follow_vfork.
+	New macros target_post_startup_inferior,
+ 	target_acknowledge_created_inferior,
+ 	target_clone_and_follow_inferior,
+ 	target_post_follow_inferior_by_clone,
+ 	target_create_catch_fork_hook, target_create_catch_vfork_hook,
+ 	target_pid_to_exec_file.
+	(find_default_clone_and_follow_inferior): New function prototype.
+
+
+	* v850ice.c (init_850ice_ops): Init new target vector fields.
+
+	* valprint.c (print_binary_chars): Print out long long as
+	a binary number.
+	(print_octal_chars): Print out long long as an octal number
+	(print_decimal_chars): Print out long long as a decimal number
+	(strcat_longest): Define it.
+	* valprint.c: Hp merge, 4/15/98 snapshot
+	Add parameter to val_print. This is used for
+	evaluating C++ expressions. 
+	
+	* value.h (VALUE_POINTED_TO_OFFSET): New macro.
+	Add field pointed_to_offset to value structure.
+	Add prototypes for new functions in valops.c.
+	(write_register_pid): Change prototype to match
+ 	function.
+	(val_print function decl): Additional parameter.
+  	(VALUE_EMBEDDED_OFFSET): New macro.
+ 	(find_rt_vbase_offset): New function decl -- for C++ support.
+
+Wed Dec 23 15:03:42 1998  Per Bothner  <bothner@cygnus.com>
+
+	* Makefile.in (READLINE_CFLAGS):  Search $(READLINE_SRC)/.. rather
+	than $(READLINE_SRC) so #include <readline/readline.h> will work.
+	* top.c:  #include <readline/history.h> instead of "history.h".
+	* tracepoint.c:  Likewise.
+	* mac-xdep.c:  Likewise.
+
+Wed Dec 23 12:32:00 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* defs.h (TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT): Define using
+ 	TARGET_BYTE_ORDER and not target_byte_order.
+
+Tue Dec 22 10:51:33 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* config/i386/cygwin.mh (TERMCAP): define.
+ 	(from Chris Faylor, cgf@cygnus.com)
+
+	* top.c: specify directory name for including readline.h
+
+	* tracepoint.c: ditto.
+
+	* utils.c: ditto.
+
+Mon Dec 21 13:30:34 1998  Mark Alexander  <marka@cygnus.com>
+
+	* value.c (value_virtual_fn_field): Handle the situation where
+	vtbl is a pointer to a structure instead of a pointer to an array.
+
+Mon Dec 21 10:38:11 1998  Andrew Cagney  <cagney@chook>
+
+	* mips-tdep.c: (MIPS_DEFAULT_FPU_TYPE): Default to
+ 	MIPS_FPU_DOUBLE.
+
+1998-12-17  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* blockframe.c (get_frame_saved_regs): If the saved_regs_addr ptr
+	is null, ensure that saved registers are copied from the local
+	variable that was used to obtain them.
+
+Sat Dec 19 09:55:09 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* mips-tdep.c (mips32_heuristic_proc_desc):  Clear temp_saved_regs
+	on restart.  Fixes problem with backtracing through functions that
+	use virtual frame pointers.
+
+Fri Dec 18 14:23:34 1998  Andrew Cagney  <cagney@chook>
+
+	* mips-tdep.c (mips_push_arguments): Don't left-shift small
+ 	structs being passed in a register when an O64 target.
+
+	* config/mips/tm-mips.h (enum mips_fpu_type, mips_fpu): Move to
+ 	mips-tdep.c.
+
+	* mips-tdep.c (mips_fpu_string): Delete variable.
+	(mips_fpu_type_auto): New variable.
+	(mips_fpu_type): Rename mips_fpu.
+	(_initialize_mips_tdep): Delete initialization of mips_fpu et.al.
+  	Rewrite ``set mipsfpu'' command set.
+	(set_mipsfpu_command, show_mipsfpu_command,
+ 	set_mipsfpu_single_command, set_mipsfpu_double_command,
+ 	set_mipsfpu_none_command, set_mipsfpu_auto_command): New
+ 	functions, handle commands.
+	(mips_push_arguments, mips_push_dummy_frame, mips_pop_frame,
+ 	mips_extract_return_value): Update.
+	
+Thu Dec 17 02:15:40 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* configure.tgt (gdb_target): Identify mips64*vr4100*-*-elf* as
+ 	vr4100.
+	
+Thu Dec 17 01:34:36 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbtypes.c (build_gdbtypes): New function.
+	(_initialize_gdbtypes): Call.
+
+Wed Dec 16 11:47:00 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbarch.c (show_architecture): Use TARGET_ARCHITECTURE.
+	* gdbarch.h, gdbarch.c: Fix typo's. Use struct's in preference to
+ 	types.
+	* gdbarch.h, gdbarch.c (gdbarch_debug): Add ``set archdebug'' to
+ 	command set.
+
+Tue Dec 15 23:46:40 1998  Andrew Cagney  <cagney@chook>
+
+	* config/mips/tm-*.h: (TARGET_BYTE_ORDER_DEFAULT,
+ 	TARGET_BYTE_ORDER_SELECTABLE_P): Replace TARGET_BYTE_ORDER and
+ 	TARGET_BYTE_ORDER_SELECTABLE.
+	
+1998-12-14  Anthony Thompson   (athompso@cambridge.arm.com)
+
+	* remote-rdp.c (rdp_init): Don't discard first character on reset.
+	(translate_open_mode): Define table.
+	(exec_swi): Handle SWI_Clock.  SWI_Open now handles stdin/stdout.
+	SWI_Write returns number of bytes not written.  SWI_Read does the
+	same.  SWI_Seek should return success/failure flag.  Fix SWI_Flen.
+
+1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* config/i386/nbsd.mh, config/m68k/nbsd.mh, config/ns32k/nbsd.mh
+	(XDEPFILES): Add ser-tcp.o.
+
+Mon Dec 14 14:46:13 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* monitor.c (monitor_expect, monitor_printf_noecho,
+ 	monitor_printf): Always compile EXTRA_RDEBUG code.
+	(RDEBUG): Ditto.
+
+	From Michael Meissner <meissner@cygnus.com>:
+	* ppcbug-rom.c (init_ppc_cmds): Cleanup formatting.
+
+1998-12-08  Michael Meissner  <meissner@cygnus.com>
+
+	* monitor.c (monitor_printable_string): New function to convert a
+	string into a printable representation.
+	(monitor_error): Call error after converting string into printable
+	format.
+	(monitor_printf{,_noecho}): If EXTRA_RDEBUG is defined, convert
+	string into printable form before printing.
+	(monitor_expect): Ditto.
+	(monitor_read_memory{,_single}): Call monitor_error, not error.
+	(monitor_read_memory): Return immediately if length is 0.
+
+	* ppcbug-rom.c (init_ppc_cmds): Fill in dump_registers field,
+ 	which is now required.
+
+Mon Dec 14 11:01:39 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbarch.h, gdbarch.c: Consolidate the semi-dynamic target system
+ 	dependant GDB parameters.
+	(set_gdbarch_from_file): Combine set_architecture_from_file and
+ 	set_byte_order_from_file.
+	* top.c, defs.h, printcmd.c: Delete them from here.
+	* Makefile.in: Add gdbarch.[ch].
+	* exec.c (exec_file_command): Call set_gdbarch_from_file.
+
+Sun Dec 13 09:52:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* defs.h (TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN): Define.
+	(TARGET_ARCHITECTURE, TARGET_ARCHITECTURE_AUTO): Define.
+	(TARGET_BYTE_ORDER_AUTO): Define.
+	(TARGET_BYTE_ORDER_SELECTABLE_P): Provide default. Replaces
+ 	TARGET_BYTE_ORDER_SELECTABLE. Handle compat issues.
+	(BITS_BIG_ENDIAN): Simplify.
+	(TARGET_FLOAT_FORMAT): Ditto.
+	(TARGET_DOUBLE_FORMAT): 
+
+	* remote-e7000.c, sh-tdep.c, printcmd.c, remote-sim.c,
+ 	remote-rdi.c, sparc-tdep.c: Update.
+	
+	* config/powerpc/tm-ppcle-eabi.h, config/rs6000/tm-rs6000.h,
+ 	config/powerpc/tm-ppc-eabi.h, config/mn10300/tm-mn10300.h:
+ 	Convert.
+
+Sat Dec 12 09:28:13 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* frame.h (struct frame_info): Add CORE_ADDR *saved_regs and
+ 	struct frame_extra_info *extra_info.
+	(frame_obstack_alloc, frame_saved_regs_zalloc): Prototype.
+	(SIZEOF_FRAME_SAVED_REGS): Provide default.
+	(FRAME_INIT_SAVED_REGS): Provide default.
+	(struct frame_saved_regs): Deprecate.
+	(EXTRA_FRAME_INFO): Deprecate.
+	
+	* blockframe.c (frame_obstack_alloc, frame_saved_regs_zalloc): New
+ 	function.
+	(generic_get_saved_register): Use FRAME_INIT_SAVED_REGS and
+ 	frame->saved_regs.
+	(frame_cache_obstack): Make static.
+	(get_frame_saved_regs): Deprecate. Copy the saved regs into the
+ 	frame buffer.
+
+	* stack.c (frame_info): Rewrite using frame->saved_regs and
+ 	FRAME_INIT_SAVED_REGS.
+	* findvar.c (find_saved_register): Ditto.
+
+	* config/mn10300/tm-mn10300.h (EXTRA_FRAME_INFO): Delete.
+	(FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS. No-op.
+	* mn10300-tdep.c: Update.
+ 	(analyze_dummy_frame): New function.
+	(struct frame_extra_info): Define.
+	(mn10300_init_extra_frame_info): Update.
+	
+	* config/rs6000/tm-rs6000.h: (EXTRA_FRAME_INFO): Delete.
+ 	(FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS.
+	(FRAME_ARGS_ADDRESS): Replace with function.
+
+	* rs6000-tdep.c (frame_get_saved_regs): Rename from
+ 	frame_get_cache_fsr.
+	(rs6000_init_extra_frame_info): New function.
+	(rs6000_frame_init_saved_regs): Call frame_get_saved_regs.
+	(FUNCTION_START_OFFSET): Delete references, was ZERO.
+	(rs6000_frame_args_address): New function.
+	(frame_initial_stack_address): Update
+	
+	* config/mips/tm-mips.h (EXTRA_FRAME_INFO): Remove saved_regs.
+	(FRAME_INIT_SAVED_REGS): Rename FRAME_FIND_SAVED_REGS, update.
+	* mips-tdep.c (mips_find_saved_regs, read_next_frame_reg,
+ 	init_extra_frame_info, mips_pop_frame): Update.
+	* config/alpha/tm-alpha.h (FRAME_INIT_SAVED_REGS,
+ 	EXTRA_FRAME_INFO), alpha-tdep.c (alpha_find_saved_regs,
+ 	alpha_pop_frame, init_extra_frame_info): Ditto.
+	
+	* i960-tdep.c, m88k-tdep.c, h8300-tdep.c: Update.
+	* config/sparc/tm-sparc.h, config/a29k/tm-a29k.h: Define
+ 	FRAME_INIT_SAVED_REGS as no-op.
+
+	* z8k-tdep.c (z8k_init_frame_saved_regs): Rename
+ 	get_frame_saved_regs.
+	(examine_frame, z8k_skip_prologue): Update.
+	* config/z8k/tm-z8k.h (FRAME_INIT_SAVED_REGS): Define.
+
+1998-12-11  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	From J.T. Conklin  <jtc@redbacknetworks.com>:
+	* i386-stub.c (handle_exception): Add support for 'P' command.
+	(NUMREGS): New macro.
+
+Fri Dec 11 09:07:05 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* i386b-nat.c: Include "expression.h".
+
+	* symtab.h: Don't include "gnu-regex.h".
+	
+	* solib.c (solib_add_common_symbols): Cast parameters passed to
+ 	make_cleanup to use the new make_cleanup_func typedef.
+
+	* inftarg.c: Include "wait.h" after, rather than before, <wait.h>.
+  	"wait.h" was defining all WIF* macro's instead of filling in those
+ 	that <wait.h> missed.
+
+Fri Dec 11 09:52:04 1998  Andrew Cagney  <cagney@chook>
+
+	* mipsm3-nat.c, hppah-nat.c, infptrace.c, i386gnu-nat.c,
+ 	hppab-nat.c, core-aout.c, arm-xdep.c, alpha-nat.c, altos-xdep.c,
+ 	pyr-xdep.c, remote-st.c, remote-os9k.c, tahoe-tdep.c, pyr-tdep.c,
+ 	vax-tdep.c: Replace reg_name with REGISTER_NAME.
+
+Thu Dec 10 15:19:40 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Jim Blandy <jimb@cygnus.com>,
+ 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
+ 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
+ 	Taylor <taylor@cygnus.com>, as part of the project to merge in
+ 	changes originally made by HP; HP did not create ChangeLog
+ 	entries.
+	
+	* annotate.c (annotate_catchpoint): New function.
+
+	* annotate.h (annotate_catchpoint): declare it; add new includes
+ 	(symtab.h and gdbtypes.h).
+
+	* buildsym.h: add external var processing_hp_compilation.
+
+	* coff-solib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): new macro. defined to 0.
+	functionality not implemented for coff.
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): New macro; generate error msg for coff.
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): ditto.
+	(SOLIB_HAVE_LOAD_EVENT): ditto.
+	(SOLIB_LOADED_LIBRARY_PATHNAME): ditto.
+	(SOLIB_HAVE_UNLOAD_EVENT): ditto.
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): ditto.
+	(SOLIB_IN_DYNAMIC_LINKER): ditto.
+	(SOLIB_RESTART): ditto.
+
+	* complaints.h: add ifdef...endif pair at beginning and end of file.
+
+	* dstread.c (dst_symfile_read): the parameter to fileno
+	must be of type FILE *. So cast abfd->iostream in the 
+	call to fileno must be cast as a FILE *, not a GDB_FILE *.
+	This will work because abfd->iostream is declared and 
+	given a value in bdf and bfd will continue to use FILE 
+	rather than GDB_FILE.
+
+	* dwarf2read.c (dwarf_bool_name): change parameter from bool
+	to mybool.  sigh.
+
+	* expression.h: include symtab.h
+	
+	* frame.h (print_only_stack_frame, show_stack_frame,
+	show_frame_info): add prototypes.
+
+	* gdbcmd.h (togglelist, stoplist): declare.
+
+	* gdbcore.h (read_memory_string): declare it.
+	(exec_file_attach): add prototype.
+
+	* inflow.c (terminal_is_ours): make non static.
+
+	* minsyms.c: minor spacing change.
+
+	* parser-defs.h (parse_nested_classes_for_hpacc): add prototype.
+	(find_template_name_end): add prototype.
+
+	* scm-lang.c (scm_unpack): cast svalue to (int).
+
+	* top.h: declare it.
+	
+	* valprint.h (print_binary_chars): new prototype definition.
+	(print_octal_chars): new prototype definition.
+	(print_decimal_chars): new prototype definition.
+
+Thu Dec 10 07:14:56 1998  Andrew Cagney  <cagney@chook>
+
+	* config/arm/tm-arm.h, arm-tdep.c: Replace REGISTER_NAMES with
+ 	REGISTER_NAME.
+	* mn10300-tdep.c, config/mn10300/tm-mn10300.h: Ditto.
+	* sh-tdep.c, config/sh/tm-sh.h: Ditto.
+
+	* defs.h (REGISTER_NAME): Provide default for old targets.
+	* defs.h, infcmd.c: Rename reg_names to gdb_register_names.
+	
+	* tracepoint.c, target.c, parse.c, infcmd.c, remote-udi.c,
+ 	expprint.c, infcmd.c, printcmd.c, eval.c, stack.c, findvar.c,
+ 	remote-udi.c, config/alpha/tm-alpha.h, remote-sim.c, d30v-tdep.c,
+ 	config/mips/tm-mips.h, hppa-tdep.c: Use REGISTER_NAME.
+
+1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
+
+	* config/i960/mon960.mt (SIM_OBJS, SIM): Define.
+
+Tue Dec  8 16:49:24 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Add mentions of newly-added configurations.
+
+1998-12-08  Philippe De Muyter  <phdm@macqel.be>
+
+        * config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
+        must accept a signal number as parameter.
+        * config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
+        * utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
+
+        * inferior.h (register_valid): Variable's type is `SIGNED char', not
+        `char'.
+        * findvar.c (register_valid): Ditto.
+
+        * defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
+        * gdbthread.h (unbind_target_thread_vector): Likewise. 
+
+Tue Dec  8 15:09:44 1998  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+        Merged in m68k-linux patch from Andreas Schwab
+ 
+        1998-12-01  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
+ 
+        * Makefile.in, configure.host, configure.tgt: Add support for
+        m68k-linux.
+        * config/m68k/linux.mh: New file.
+        * config/m68k/linux.mt: New file.
+        * config/m68k/nm-linux.h: New file.
+        * config/m68k/tm-linux.h: New file.
+        * config/m68k/xm-linux.h: New file.
+        * gdb/m68klinux-nat.c: New file.
+        * gdbserver/low-linux.c: Add support for m68k-linux.
+        * gdb/config/m68k/tm-m68k.h (NUM_FREGS): New macro.
+
+1998-12-07  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
+	* config/powerpc/xm-cygwin.h: Ditto.
+
+1998-12-07  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* rs6000-tdep.c (pop_frame): Correctly find the registers saved in
+	the stack frame.  Their offset from the previous stack frame is in
+	fdata.gpr_offset and fdata.fpr_offset, not fdata.offset.
+	(gdb.base/return.exp)
+	* config/rs6000/tm-rs6000.h: Doc fixes.
+
+1998-12-03  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * monitor.c (monitor_read_memory): Zero out pattern buffers
+        before calling re_search.
+        (parse_register_dump): Ditto.
+
+Thu Dec  3 10:37:22 EST 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	FR30 updates - still very preliminary.
+	* configure.tgt
+	* fr30-tdep.c
+	* config/fr30/tm-fr30.h
+	
+Thu Dec  3 16:30:35 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ax-gdb.c: Include target.h.
+
+Tue Dec  3 10:59:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ax-gdb.c (_initialize_ax_gdb), i960-tdep.c (pop_frame),
+ 	monitor.c (flush_monitor_dcache, longlongendswap), remote-array.c
+ 	(hexword2ascii), w89k-rom.c (init_w89k_cmds), z8k-tdep.c
+ 	(init_frame_pc, extract_return_value): Make return type void.
+	* monitor.c (monitor_write_even_block): Make return type explicit.
+	(monotor_read_memory_block): Delete function.
+	* monitor.h: Update.
+	* remote.c (remote_get_threadlist, remote_update_threads),
+ 	remote-array.c (array_get_packet), remote-rdi.c (Fail): Always
+ 	return a value.
+	* m32r-tdep.c (m32r_fix_call_dummy): From Michael Snyder, void
+ 	function.
+	* jv-valprint.c (java_val_print): From Stu Grossman. Return 0 by
+ 	default.
+	
+Wed Dec  2 15:11:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c: Move default definition of 
+	TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
+	* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
+	* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
+	use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
+	(gen_trace_for_expr): new argument, address of tracepoint, 
+	gets passed to new_agent_expr and added to struct agent_expr.
+	(is_nontrivial_conversion): call to new_agent_expr now requires
+	a dummy argument.  (agent_command): use get_current_frame() to
+	get current PC scope; pass it to gen_trace_for_expr.
+	* ax-general.c (new_agent_expr): new argument, address of 
+	tracepoint; store it in new field of struct agent_expr.
+	* ax.h (struct agent_expr): add new field for tracepoint address.
+	* ax-gdb.h: change prototypes to match above changes.
+
+	* m32r-tdep.c (decode_prologue): If no branch or push fp is found,
+	but there's a stack adjust, then use that as the end of prologue.
+	(m32r_skip_prologue): don't skip past the first line if there is 
+	line info.  (m32r_virtual_frame_pointer): new function.
+	(m32r_fix_call_dummy): no return value needed.
+	
+Tue Dec  1 10:59:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ocd.c (remote_timeout), (BDM_BREAKPOINT), monitor.c (readchar),
+ 	remote.c: Cleanup closing of open comments.
+
+Mon Nov 30 16:04:03 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* config/fr30/tm-fr30.h (INNER_THAN): Add parameters.
+
+Mon Nov 30 11:18:48 1998  Andrew Cagney  <cagney@chook>
+
+	* frame.h (FRAME_CHAIN_VALID): Default to
+ 	default_frame_chain_valid.
+	* blockframe.c (default_frame_chain_valid): New function.
+	
+	* frame.h (FRAME_CHAIN_VALID_ALTERNATIVE): Delete references
+	* blockframe.c (alternate_frame_chain_valid): New function.
+	* config/mips/tm-mipsv4.h, config/m88k/tm-delta88v4.h,
+ 	config/m68k/tm-monitor.h, config/m68k/tm-m68kv4.h,
+ 	config/i386/tm-i386v4.h, config/i386/tm-i386nw.h,
+ 	config/h8300/tm-h8300.h: Update.
+
+	* blockframe.c (nonnull_frame_chain_valid): New function.
+	* config/m68k/tm-os68k.h, config/m68k/tm-vx68.h,
+ 	config/m68k/tm-apollo68b.h, config/i960/tm-vx960.h,
+ 	config/arc/tm-arc.h: Update FRAME_CHAIN_VALID.
+
+	* hppa-tdep.c (frame_chain_valid, hppa_frame_chain_valid),
+ 	remote-vx29k.c (get_fp_contents, vx29k_frame_chain_valid),
+ 	arm-tdep.c (frame_chain_valid, arm_frame_chain_valid): Rename
+ 	functions so that they are name space clean.
+	* config/pa/tm-hppa.h, config/a29k/tm-vx29k.h,
+ 	config/arm/tm-arm.h: Update FRAME_CHAIN_VALID.
+	
+	* gould-tdep.c (gould_frame_chain_valid), d30v-tdep.c
+ 	(d30v_frame_chain_valid), d10v-tdep.c (d10v_frame_chain_valid):
+ 	New functions.
+	* config/gould/tm-np1.h, config/gould/tm-pn.h,
+ 	config/d30v/tm-d30v.h, config/d10v/tm-d10v.h: Update
+ 	FRAME_CHAIN_VALID.
+
+Sun Nov 29 11:18:37 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* z8k-tdep.c (z8k_addr_bits_remove), w65-tdep.c
+ 	(w65_addr_bits_remove), h8500-tdep.c (h8500_addr_bits_remove),
+ 	m88k-tdep.c (m88k_addr_bits_remove): Function to clean up an
+ 	address.
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/m88k/tm-m88k.h,
+ 	config/h8500/tm-h8500.h: Define ADDR_BITS_REMOVE to call targets
+ 	corresponding function.
+	* z8k-tdep.c (saved_pc_after_call): Update.
+
+Sat Nov 28 12:24:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h,
+ 	config/v850/tm-v850.h, config/tahoe/tm-tahoe.h,
+ 	config/sparc/tm-sparc.h, config/sh/tm-sh.h,
+ 	config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h,
+ 	config/pa/tm-hppa.h, config/ns32k/tm-umax.h,
+ 	config/ns32k/tm-merlin.h, config/none/tm-none.h,
+ 	config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h,
+ 	config/mips/tm-mips.h, config/m88k/tm-m88k.h,
+ 	config/m68k/tm-m68k.h, config/m32r/tm-m32r.h,
+ 	config/i960/tm-i960.h, config/i386/tm-i386.h,
+ 	config/h8500/tm-h8500.h, config/h8300/tm-h8300.h,
+ 	config/gould/tm-pn.h, config/gould/tm-np1.h, config/arm/tm-arm.h,
+ 	config/convex/tm-convex.h, config/d10v/tm-d10v.h,
+ 	config/alpha/tm-alpha.h, config/a29k/tm-a29k.h: Add parameters to
+ 	macro INNER_THAN.
+
+	* valops.c (push_word, value_push, call_function_by_hand),
+ 	breakpoint.c (bpstat_stop_status), blockframe.c
+ 	(generic_push_dummy_frame, generic_frame_chain_valid), inferior.h
+ 	(PC_IN_CALL_DUMMY), infrun.c (wait_for_inferior): Update use of
+ 	INNER_THAN.
+
+Fri Nov 27 11:00:25 1998  Andrew Cagney  <cagney@chook>
+
+	* target.h (one_stepped): Move global from here.
+	* infrun.c (singlestep_breakpoints_inserted_p): To here. Rename.
+  	Make static.
+	(wait_for_inferior): Update.
+	(resume): Update. Set variable after call to SOFTWARE_SINGLE_STEP.
+	
+	* target.h (NO_SINGLE_STEP): Replace with SOFTWARE_SINGLE_STEP_P
+ 	and SOFTWARE_SINGLE_STEP.
+	* config/sparc/tm-sparc.h, config/rs6000/tm-rs6000.h,
+ 	config/arc/tm-arc.h: Update.
+	* rs6000-tdep.c (rs6000_software_single_step), sparc-tdep.c
+ 	(sparc_software_single_step), arc-tdep.c (arc_single_step): New
+ 	functions. Replace function single_step.
+	
+	* config/mips/tm-mips.h (STEP_SKIPS_DELAY_P): Define.
+	* infrun.c (proceed): Cleanup.
+
+Thu Nov 26 11:19:15 1998  Andrew Cagney  <cagney@amy.cygnus.com>
+
+	* config/alpha/tm-alpha.h (ABOUT_TO_RETURN): Replace macro.
+	* alpha-tdep.c (alpha_about_to_return): With new function.
+	(heuristic_proc_start): Update.
+	* config/mips/tm-mips.h (ABOUT_TO_RETURN), mips-tdep.c
+ 	(heuristic_proc_start, mips_about_to_return): Ditto.
+	* config/ns32k/tm-merlin.h (ABOUT_TO_RETURN),
+ 	config/ns32k/tm-umax.h (ABOUT_TO_RETURN), ns32k-tdep.c
+ 	(ns32k_about_to_return, ns32k_get_enter_addr): Ditto.
+
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h,
+ 	config/tahoe/tm-tahoe.h, config/sparc/tm-sparc.h,
+ 	config/sh/tm-sh.h, config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h,
+ 	config/pa/tm-hppa.h, config/m88k/tm-m88k.h, config/m68k/tm-m68k.h,
+ 	config/i960/tm-i960.h, config/i386/tm-i386.h,
+ 	config/h8500/tm-h8500.h, config/h8300/tm-h8300.h,
+ 	config/gould/tm-pn.h, config/gould/tm-np1.h,
+ 	config/convex/tm-convex.h, config/arm/tm-arm.h,
+ 	config/arc/tm-arc.h, config/a29k/tm-a29k.h: Delete macro
+ 	ABOUT_TO_RETURN.
+	* config/w65/tm-w65.h (RTL, RTS): Delete macros.
+	* h8500-tdep.c (about_to_return): Delete function.
+
+Thu Nov 26 11:19:15 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint
+ 	and little_breakpoint to char[] from char*.
+	* remote-array.c (array_insert_breakpoint): Change bp_addr to
+ 	CORE_ADDR type.
+
+Wed Nov 25 00:13:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* vx-share/xdr_ld.c (xdr_ldtabl): Cast second arg to char**
+ 	instead of char*.
+
+	* configure.tgt (v850): Only build v850ice when cygwin and gui.
+	* configure.in: Add parameter to --enable-build-warnings.
+	* configure: Re-build.
+
+	* c-exp.y (parse_number): Rewrite shift to pacify GCC.
+
+	* config/i960/tm-i960.h (BREAKPOINT): Delete definition - simply
+ 	wrong.
+
+	* monitor.c (compile_pattern): Make val const char*.
+	(monitor_wait_cleanup): Make old_timeout void*, pointing at
+ 	old_timeout.
+	(monitor_wait): Update.
+
+	* remote-udi.c, remote-sim.c, remote-e7000.c, hppa-tdep.c,
+ 	remote-mips.c, sparcl-tdep.c, xcoffread.c: Cast parameters passed
+ 	to make_cleanup to use the new make_cleanup_func typedef.
+
+	* alpha-tdep.c (MASK): Use LONGEST to avoid arithmetic overflow.
+
+	* config/a29k/tm-a29k.h (TRANSPARENT): Rename macro to
+ 	TRANSPARENT_FRAME. Avoid name-space clash.
+	* a29k-tdep.c (init_frame_info): Update.
+
+Wed Nov 25 20:37:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint
+ 	and little_breakpoint to char[] from char*.
+	* mem-break.c (memory_insert_breakpoint,
+ 	memory_remove_breakpoint): Pass address of bplen.
+	* remote-array.c (array_insert_breakpoint): Change bp_addr to
+ 	CORE_ADDR type.
+
+Tue Nov 24 15:46:33 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
+	new target macro.
+	* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
+	* tracepoint.c (encode_actions): Use the new target macro to
+	determine the virtual frame pointer, for collecting locals/args.
+	(add_local_symbols, collect_symbol): add a register/offset pair of
+	arguments so that the virtual frame pointer can be passed in.
+
+1998-11-24  Felix Lee  <flee@cygnus.com>
+
+	* procfs.c (procfs_wait): handle syscall events first.
+	
+	* procfs.c (GDB_GREGSET_TYPE, GDB_FPREGSET_TYPE): new macros.
+	* config/sparc/xm-sun4sol2.h: use them.
+	* core-sol2.c: don't #undef gregset_t and fpregset_t.
+	* sol-thread.c: ditto.
+	* sparc-tdep.c: ditto.
+	
+Tue Nov 24 14:13:10 1998  Andrew Cagney  <cagney@chook>
+
+	* breakpoint.c (memory_breakpoint_size): Delete global.
+	(read_memory_nobpt): Determine real breakpoint address and size
+ 	using BREAKPOINT_FROM_PC.
+
+	* defs.h (breakpoint_from_pc_fn): BREAKPOINT_FROM_PC function
+ 	template.
+	* target.h, mem-break.c (memory_breakpoint_from_pc):
+ 	Rewrite. Always define.  Return NULL when memory breakpoints are
+ 	not supported.
+	(memory_insert_breakpoint, memory_remove_breakpoint): Call
+ 	BREAKPOINT_FROM_PC.
+	* target.h (BREAKPOINT_FROM_PC): Provide default.
+	* gdbint.texinfo (BREAKPOINT_FROM_PC): Document.
+
+	* config/rs6000/tm-rs6000.h (BREAKPOINT): Delete macro.
+ 	(BREAKPOINT_FROM_PC): Define.
+ 	({BIG,LITTLE}_BREAKPOINT): Move macros from here.
+	* rs6000-tdep.c: To here.
+ 	(rs6000_breakpoint_from_pc): New function.
+
+	* config/mn10300/tm-mn10300.h (BREAKPOINT): Delete macro.
+ 	(BREAKPOINT_FROM_PC): Define, call.
+	* mn10300-tdep.c (mn10300_breakpoint_from_pc): New function.
+
+	* config/mips/tm-mips.h ({BIG,LITTLE}_BREAKPOINT,
+ 	IDT_{BIG,LITTLE}_BREAKPOINT, PMON_{BIG,LITTLE}_BREAKPOINT,
+ 	MIPS16_{BIG,LITTLE}_BREAKPOINT): Move macros from here.
+	* mips-tdep.c: To here.
+
+	* config/arm/tm-arm.h ({BIG,LITTLE}_BREAKPOINT): Delete macros.
+ 	({ARM,THUMB}_{BE,LE}_BREAKPOINT): Move macros from here.
+	* arm-tdep.c: To here.
+	
+	* remote-array.c (memory_breakpoint_size): Delete variable.
+	(array_insert_breakpoint): Obtain breakpoint size using
+ 	BREAKPOINT_FROM_PC.
+	* remote-st.c (memory_breakpoint_size, st2000_insert_breakpoint):
+ 	Ditto.
+	* remote-os9k.c (memory_breakpoint_size,
+ 	rombug_insert_breakpoint): Ditto.
+	* remote-e7000.c (memory_breakpoint_size): Ditto.
+
+Mon Nov 23 11:38:40 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* symfile.c (deduce_language_from_filename): rewrite so as to 
+	work from a table of filename extensions, modifiable by the user.
+	(filename_language_table): new data structure.
+	(set_ext_lang_command): new function for new command, "set
+	extension-language".  (info_extension_language_command): new
+	function for new command "info extension-languages".
+	(add_filename_language, init_filename_language_table): new
+	support functions for the above.
+	* language.c (language_enum): new function.  Support for above.
+
+Mon Nov 23 10:47:54 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* config/sh/tm-sh.h, config/mn10200/tm-mn10200.h,
+ 	config/m32r/tm-m32r.h, config/arm/tm-arm.h, config/i960/tm-i960.h,
+ 	config/gould/tm-np1.h, config/d10v/tm-d10v.h,
+ 	config/v850/tm-v850.h, config/pa/tm-hppa.h, config/a29k/tm-a29k.h,
+ 	config/mn10300/tm-mn10300.h, config/mips/tm-mips.h
+ 	(USE_STRUCT_CONVENTION): Cleanup, define macro as function.
+	
+	* sh-tdep.c (sh_use_struct_convention), mn10200-tdep.c
+ 	(mn10200_use_struct_convention), i960-tdep.c
+ 	(i960_use_struct_convention), gould-tdep.c
+ 	(gould_use_struct_convention), d10v-tdep.c
+ 	(d10v_use_struct_convention), v850-tdep.c
+ 	(v850_use_struct_convention), hppa-tdep.c
+ 	(hpha_use_struct_convention), m32r-tdep.c
+ 	(m32r_use_struct_convention), arm-tdep.c
+ 	(arm_use_struct_convention), mn10300-tdep.c
+ 	(mn10300_use_struct_convention), a29k-tdep.c
+ 	(a29k_use_struct_convention), mips-tdep.c
+ 	(mips_use_struct_convention): New functions
+
+	* value.h, values.c (generic_use_struct_convention): New function,
+ 	replace macro.
+	* values.c (USE_STRUCT_CONVENTION): Macro defaults to function
+ 	generic_use_struct_convention.
+
+Sat Nov 21 17:15:40 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* breakpoint.c (bpstat_stop_status): Do not increment hit_count
+	of breakpoint if condition is not true. 
+
+	* coffread.c (coff_symtab_read): Discard C_LABEL's that are not
+	function entry points, to avoid getting them in the stack dump
+	instead of the actual function.
+
+	* config/m68k/delta68.mh (NAT_FILE): Undo 1998-08-18 change;
+ 	without NAT_FILE definition, configure will assume that GDB cannot
+ 	run native.
+	* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
+	* delta68-nat.c (kernel_u_size): New function.
+
+Fri Nov 20 10:13:03 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* buildsym.c (end_symtab): Cleanup PROCESS_LINENUMBER_HOOK.
+
+Thu Nov 19 15:21:04 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* rdi-share/host.h: if compiling under Cygwin, make sure new
+	preprocessor define is defined.  Define it if not.
+	* rdi-share/hostchan.h: ditto
+	* rdi-share/aclocal.m4: regenerate
+	* rdi-share/configure: regenerate
+
+Thu Nov 19 14:43:44 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* configure.in: switch back to checking __CYGWIN32__
+	* configure: regenerate
+
+Thu Nov 19 09:53:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* exec.c (exec_file_command): Cleanup. Replace #if
+ 	NEED_TEXT_START_END with if().
+	* config/pa/nm-hppah.h (NEED_TEXT_START_END): Redefine to be 1.
+	* config/convex/tm-convex.h (NEED_TEXT_START_END): Ditto.
+	* config/gould/tm-np1.h (NEED_TEXT_START_END): Ditto.
+	* config/a29k/tm-a29k.h (NEED_TEXT_START_END): Ditto.
+
+Thu Nov 19 13:06:22 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* main.c: Wait until more time has passed before calling
+	new cygwin_ funcs, revert back to the cygwin32_ ones for now.
+	* win32-nat.c: Ditto.
+
+Wed Nov 18 15:03:17 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* 29k-share/udi/udip2soc.c (UDIConnect): Replace sys_errlist with
+ 	strerror.
+
+Mon Nov 16 14:17:05 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* defs.h: if compiling under Cygwin, define __CYGWIN__ if
+	__CYGWIN32__ is defined and __CYGWIN__ isn't for backwards
+	compatibility.
+
+Fri Nov 13 00:15:08 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	Changes to account for name change from cygwin32 to cygwin and
+	clean up Win32-related ifdefs.
+	
+	* configure.tgt: check for cygwin* instead of cygwin32.
+	New cygwin gdb_target variable loses the "32".
+	* configure.host: check for cygwin* instead of cygwin32.
+	New cygwin gdb_host variable loses the "32".
+	* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
+	rename gdb_cv_os_cygwin32 variable to drop the "32".  Call
+	AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
+	autoconf yet.
+	* configure: regenerate.
+
+	* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h where
+	cygwin path conv protos live, instead of adding a proto here for
+	them here.
+        * {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
+	instead of __CYGWIN32__.
+	* source.c: thoughout, check _WIN32 instead of WIN32.
+	
+	* config/i386/cygwin32.mh: delete.
+	* config/i386/cygwin.mh: new file, was cygwin32.mh.
+	* config/i386/cygwin32.mt: delete.
+	* config/i386/cygwin.mt: new file, was cygwin32.mt.
+	* config/i386/tm-cygwin32.h: delete.
+	* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
+	* config/i386/xm-cygwin32.h: delete.
+	* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
+	* config/i386/xm-windows.h: #include xm-cygwin.h now.
+	* config/powerpc/cygwin32.mh: delete.
+	* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
+	* config/powerpc/cygwin32.mt: delete.
+	* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
+	* config/powerpc/tm-cygwin32.h: delete.
+	* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
+	* config/powerpc/xm-cygwin32.h: delete.
+	* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
+
+	* rdi-share/aclocal.m4: regenerate with aclocal.
+	* rdi-share/configure: regenerate with autoconf.
+	* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c, serpardr.c,
+	unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
+
+Thu Nov 12 17:19:43 1998  John Metzler  <jmetzler@cygnus.com>
+
+        * remote.c (remote_get_threadinfo): Support for remote
+        multithread debugging.
+        (remote_get_threadlist): get a partial list of threads
+        (remote_threadlist_iterator): Step through all the threads
+        (init_remote_threadtests): Optional builtin unit test commands.
+
+        * thread.c (bind_target_thread_vector): Implementa a more dynamic
+        way of accessing target specific thread info functions than 
+        FIND_NEW_THREADS.
+        (target_thread_info): Function to get extended thread information.
+
+        * gdbthread.h: Export internal data structures corresponding to
+        external detailed thread info response. This is more like a 'ps'
+        command than what might be expected of host based threads. This
+        is for embedded systems.
+
+Wed Nov 11 15:47:00 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* procfs.c (proc_set_exec_trap): don't set PR_ASYNC or PR_FORK
+        in the child process for UnixWare (causes processes forked by 
+        the debuggee to hang).
+
+Mon Nov  9 12:00:36 1998  Dave Brolley  <brolley@cygnus.com>
+
+	* config/fr30/fr30.mt: New file.
+	* config/fr30/tm-fr30.h: New file.
+
+1998-11-05  Jim Wilson  <wilson@cygnus.com>
+
+	* remote-vx.c (net_read_registers, net_write_registers, 
+	vx_xver_memory, vx_resume, vx_attach, vx_detach, vx_kill): 
+	Change errno to errno_num.
+	* vx-share/xdr_ptrace.c (xdr_ptrace_return): Likewise.
+	* vx-share/xdr_ptrace.h (struct ptrace_return): Likewise.
+
+Thu Nov  5 08:41:33 1998  Christopher Faylor <cgf@cygnus.com>
+
+	* top.c (gdb_readline): Allow CRLF line termination on systems
+	which define CRLF_SOURCE_FILES.
+	* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
+	a running process, and 3) implement limited support for cygwin
+	signals.
+	(thread_rec): New function.
+	(child_add_thread): Ditto.
+	(child_init_thread_list): Ditto.
+	(child_delete_thread): Ditto.
+	(do_child_fetch_inferior_registers): Ditto.
+	(do_child_store_inferior_registers): Ditto.
+	(handle_output_debug_string): Ditto.
+	(child_fetch_inferior_registers): Use do_* function to perform
+	operation.
+	(child_store_inferior_registers): Ditto.
+	(child_continue): Ditto.
+	(child_thread_alive): Ditto.
+	(cygwin_pid_to_str): Ditto.
+	(handle_load_dll): Reorganize, add first attempt at reading
+	dll names from attached processes.  Change info messages to provide
+	more information when dll is already loaded.
+	(handle_exception): Changes mandated by new thread-aware structures.
+	(child_wait): Track thread creation/destruction.  Handle cygwin
+	signals.
+	(child_create_inferior): Ditto.
+	(child_resume): Ditto.
+	(child_kill_inferior): Ditto.  Close child process handle to avoid a
+	handle leak.
+	(child_ops): Fill out child_ops fields that deal with threads.
+	* config/i386/tm-cygwin32.h: Declare function and macro needed
+	for converting a cygwin "pid" to a string.
+	* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
+	sigsetmask is not defined in cygwin.
+
+Thu Nov  5 08:38:18 1998  Christopher Faylor <cgf@cygnus.com>
+
+	* win32-nat.c: Remove obsolete PPC conditionals.
+
+Wed Nov  4 18:44:31 1998  Dave Brolley  <brolley@cygnus.com>
+
+	* configure.tgt: Add fr30-*-elf*.
+
+1998-11-03  Jim Wilson  <wilson@cygnus.com>
+
+	* c-exp.y (parse_number): Check TARGET_LONG_LONG_BIT when setting
+	high_bit to avoid undefined negative shift.
+
+Mon Nov  2 15:26:33 1998  Geoffrey Noer  <noer@cygnus.com>
+
+        * configure.in: Check cygwin* instead of cygwin32*.
+	* configure: regenerate
+
+Thu Oct 29 10:04:20 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	[Support for trace debugging: registers that were not collected.]
+	* remote.c (remote_fetch_registers): accept 'xxxx' in the register
+	packet, with the meaning "register value is not available".
+	Set register_valid to -1, which will connote "no value available".
+	* findvar.c (read_relative_register_raw_bytes): return failure if
+	register_valid == -1.  (value_of_register): return failure if 
+	register_valid == -1.  (read_var_value): return error if 
+	value_of_register fails for a register variable.
+	(value_from_register): return failure if register_valid == -1.
+	* eval.c (evaluate_subexp_standard): return error if 
+	value_of_register fails for a register used in an expression.
+	* infcmd.c (do_registers_info): display "value not available"
+	for registers for which register_valid == -1.
+
+	* tracepoint.c (set_raw_tracepoint): just save the filename as is
+	from the symbol table, rather than trying to prepend the dir name.
+	Also save the bfd section.  (tracepoints_info): use the section
+	when looking up the function name.
+	* tracepoint.h: add section field to tracepoint struct.
+
+Wed Oct 28 08:01:38 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparcl-tdep.c (send_resp, sparclite_serial_start,
+	sparclite_serial_write): Use remote_timeout instead of hardcoded
+	two second timeout.
+	(download): Fix adjustment of a.out load addresses.
+
+Wed Oct 28 12:32:58 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure.in (--enable-build-warnings): Finish rename from
+ 	--enable-warnings.
+	(enable-build-warnings): Add -Wpointer-arth, allow =* for
+ 	sim/common compatibility.
+	* configure: Re-generate.
+
+Wed Oct 21 08:44:30 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* 29k-share/udi/udip2soc.c: Replace sys_errlist with strerror().
+
+Thu Oct 22 09:56:55 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/rs6000/aix4.mh (NATDEPFILES): Move xcoffread.o from here.
+	* config/rs6000/aix4.mt (TDEPFILES): To here.
+
+Wed Oct 21 10:02:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* rdi-share/unixcomm.c: Provide definitions of SERPORT and PARPORT
+ 	on BSD hosts.
+
+1998-10-19  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in (AM_EXEEXT): Use AC_EXEEXT instead.
+	* configure: Regenerated.
+
+Sat Oct 17 17:39:23 1998  Felix Lee  <flee@cygnus.com>
+
+	* core-sol2.c: #include <sys/types.h>, for sol2.7 weirdness.
+
+Fri Oct 16 15:31:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-tdep.c (decode_prologue): Return failure if we reach 
+	the end of the function without finding the end of the prologue.
+
+1998-10-16  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* command.c copying.c copying.awk core-aout.c core-regset.c
+	  corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c
+	  infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c
+	  symmisc.c valarith.c: Add prototypes.
+
+	* defs.h: Add prototype for utils.c::do_run_cleanups.
+
+	* gdbtypes.c: Add prototypes.
+	(make_pointer_type): Add braces to remove nested if-else ambiguity.
+	(make_reference_type): Ditto.
+
+	* printcmd.c (printf_command): Initialize 'f' and 'string' at 
+	function startup to suppress possibly-used-before-initialized warning.
+
+	* remote-utils.c: Add prototypes.
+	(sr_pollchar): Add braces to remove nested if-else ambiguity.
+
+	* ser-tcp.c: Add prototypes.
+	(wait_for): Add braces to remove nested if-else ambiguity.
+	(tcp_readchar): Ditto.
+
+	* ser-unix.c: Add prototypes.
+	(get_tty_state): Don't define errno here.
+	(hardwire_readchar): Only define 't' if we are compiling in a Cygwin
+	environment.
+
+	* symtab.c: Add prototypes.
+	(find_methods): Add braces to remove nested if-else ambiguity.
+	(search_symbols): Set 'i' to an initial value to suppress a
+	possibly-used-before-initialized warning.
+
+	* valops.c: Add prototypes.
+	(value_cast): Set 'eltype2' to an initial value to suppress a
+	possibly-used-before-initialized warning.
+	(value_of_variable): Add braces to remove nested if-else ambiguity.
+	(value_of_this): Ditto.
+
+	* valprint.c: Add prototypes.
+	(print_floating): Add braces to remove nested if-else ambiguity.
+
+Thu Oct 15 19:50:48 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* tm-sp64.h (SETUP_ARBITRARY_FRAME, FRAME_SPECIFICATION_DYADIC):
+	Remove, nevermore used.
+
+Thu Oct 15 16:55:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* command.c: Include "wait.h" after, rather than before, <wait.h>.
+  	"wait.h" was defining all WIF* macro's instead of filling in those
+ 	that <wait.h> missed.
+
+1998-10-14  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* defs.h: Move _initialize_printcmd, _initialize_stack,
+ 	_initialize_blockframe out of here and in to their respective .c
+ 	files.
+	* blockframe.c: Move _initialize_blockframe prototype to here.
+	* printcmd.c: Move _initialize_printcmd prototype to here.
+	* stack.c: Move _initialize_stack prototype to here.
+
+	* source.c, symtab.h: Move _initialize_source prototype to the .c
+	file.
+	* values.c, value.h: Move _initialize_values prototype to the .c file.
+	* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c 
+	file.
+	* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype 
+        to the .c file.
+
+	* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
+	Standardize comments for the prototype section of these files.
+
+	* configure.in: Look in libc for wctype before looking for it in libc.
+
+Tue Oct 13 18:56:51 1998  Felix Lee  <flee@cygnus.com>
+
+	* sol-thread.c (ps_pstop, etc): simple test for proc_service.h
+ 	version didn't work for sol2.6; pushed it to autoconf.
+	* configure.in (gdb_cv_proc_service_is_old): new test.
+	* acconfig.h (PROC_SERVICE_IS_OLD): new define.
+	* configure, config.in: regenerate.
+
+1998-10-13  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
+	possible nested-if confusion.
+	* breakpoint.c (breakpoint_here_p): Ditto.
+	(breakpoint_inserted_here_p): Ditto.
+	(breakpoint_thread_match): Ditto.
+
+	* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
+	* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability 
+	prototypes.
+
+	* symtab.h: Add prototype for _initialize_source.
+	* value.h: Add prototype for _initialize_value.
+
+	* defs.h: Include sys/types.h or stddef.h to get size_t.
+	(make_cleanup): Add make_cleanup_func typedef and switch to using 
+        a prototype for this function.
+	(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
+	using mmalloc.
+
+	* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c
+ 	dwarf2read.c dwarfread.c elfread.c eval.c exec.c infcmd.c infrun.c
+ 	mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
+ 	symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c
+ 	valops.c: Cast parameters passed to make_cleanup to use the new
+ 	make_cleanup_func typedef.
+
+Tue Oct 13 00:51:48 1998  Felix Lee  <flee@cygnus.com>
+
+	* sol-thread.c (ps_pstop, etc): different solaris versions have
+ 	slightly different prototypes in proc_service.h; compensate.
+
+1998-10-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * Makefile.in (AWK): Unused; remove.
+        * configure.in: Remove unused autoconf checks for MINIX, memcpy,
+        poll, select, strings.h.
+        * config.in: Regenerated.
+        * configure: Regenerated.
+
+1998-10-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Check for sys/debugreg.h, asm/debugreg.h.
+	* i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
+	present.
+
+Sun Oct 11 12:08:07 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* dwarf2read.c (dwarf2_build_psymtabs_hard):  Do not adjust the
+	address range of a compilation unit without children.
+
+	* mdebugread.c (parse_partial_symbols):  Fix handling of stabs
+	continuations, use xmalloc and xrealloc.
+
+Fri Oct  9 18:14:43 1998  Mark Alexander  <marka@cygnus.com>
+
+	* rs6000-tdep.c: Don't include tm.h twice.
+
+1998-10-08  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Remove calls to {pre,post}_add_symbol_hooks.
+	There should be sufficient information/hooks now to eliminate
+	this hack.
+
+	* exec.c (file_command): Add a new hook here to inform ui's
+	when the exec file has changed. Adding it here allows the
+	ui to be informed after symbol reading.
+
+	* gdbcore.h: Add declaration of file_changed_hook.
+
+Thu Oct  8 08:40:42 1998  Mark Alexander  <marka@cygnus.com>
+
+	* rs6000-tdep.c (get_saved_register): Define only if
+	USE_GENERIC_DUMMY_FRAMES is defined.
+
+1998-10-06  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+ 	Eliminate a few warnings from the compiler.
+	* breakpoint.h: Add prototype.
+	* breakpoint.c (do_enable_breakpoint): cast mem_cnt, i to (void).
+	* configure.in: Check if strdup declaration is necessary.
+	* configure: Regenerated.
+	* defs.h: Add prototypes.
+	* gdb_string.h: Only define strdup if necessary.
+	* gdbthread.h: Add prototypes.
+	* printcmd.c: Add prototyptes.
+	(disassemble_command): Remove unused variable 'section'.
+	* symtab.c: Add prototypes.
+	* symtab.h: Include gnu-regex.h, add prototype.
+	* thread.c: Add prototype.
+
+Mon Oct  5 19:44:39 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From David Purves  <purves@apogee.com>:
+	* stabsread.c (rs6000_builtin_type): Create a complex float instead
+	of an error.
+	(read_sun_floating_type): Similarly.
+	(read_range_type): Create a complex float if self_subrange is
+ 	true.
+
+Fri Oct  2 19:42:31 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-lang.c (emit_char c_printchar c_printstr), c-lang.h (c_printstr)
+	ch-lang.c (chill_printstr chill_printchar) c-valprint.c (c_val_print)
+	ch-valprint.c (chill_val_print) expprint.c (print_subexp) f-lang.c
+	(f_printstr f_printchar emit_char) f-valprint.c (f_val_print) 
+	jv-lang.c (java_printchar java_emit_char) jv-valprint.c 
+	(java_value_print java_val_print) language.c (unk_lang_printchar 
+	unk_lang_printstr unk_lang_emit_char) language.h (struct 
+	language_defn LA_PRINT_STRING LA_EMIT_CHAR) m2-lang.c (m2_printstr 
+	m2_printchar emit_char) printcmd.c (print_formatted) scm-lang.c 
+	(scm_printstr) valprint.c (val_print_string) value.h 
+	(val_print_string):  Add emit_char routines to language_desc struct 
+	to allow finer control over language specific character output issues.
+  	Add character width arg to printstr routines to allow handling of 
+	wchar_t/Unicode strings.  Fix c_printstr to handle wide characters.
+  	Supply width argument to LA_PRINT_STRING and val_print_string.
+
+	* jv-lang.c (java_object_type dynamics_objfile java_link_class_type
+	get_dynamics_objfile get_java_object_type) jv-lang.h
+	(get_java_object_type):  Make lots of things static.
+
+	* expprint.c (dump_prefix_expression dump_subexp):  Move opcode name
+	printing to common routine (op_name).
+	* (dump_subexp):  Add support for OP_SCOPE.
+
+Fri Oct  2 16:25:54 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.host (i[3456]86-*-windows): Remove, no longer used.
+	* mswin: Remove directory, no longer used.
+
+Fri Oct  2 18:52:20 1998  Fernando Nasser  <fnasser@cygnus.com>
+
+	* sol-thread.c: Fixed prototypes and calls to supply_fpregset and
+ 	fill_fpregset
+
+1998-10-02  Keith Seitz  <keiths@cygnus.com>
+
+	* remote.c (remote_interrupt): Rewrite to use remote_stop.
+	(remote_interrupt_twice): Remove. remote_stop now handles it.
+	(remote_stop): New function which handles interrupting the
+	remote target so that CLUI and GUI use the same core functions
+	to achieve the same goal.
+	(remote_wait): Change to handle remote_stop properly.
+	[interrupted_already]: New static global to help remote_stop.
+	[remote_ops, extended_remote_ops]: Add remote_stop for to_stop member.
+
+	* target.c: Rename static function "ignore" to "target_ignore" and
+	export it so that gdb can determin if some target vector member is
+	actually not defined. Replace all occurances of ignore.
+
+	* target.h: Export target_ignore.
+
+Fri Oct  2 03:51:48 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* target.c (target_xfer_memory):  Handle requests with zero
+	transfer length right away.
+
+	* values.c (unpack_double):  Set up code, length and signedness of
+	type _after_ checking for typedef.
+
+Thu Oct  1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+	* breakpoint.c (bpstat_stop_status): Do not consider an
+	untripped watchpoint as a "hit".
+
+Thu Oct  1 20:52:39 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* exec.c (exec_file_command), convex-tdep.c (exec_file_command),
+ 	arm-xdep.c (exec_file_command), remote-rdp.c
+ 	(remote_rdp_create_inferior), remote-os9k.c
+ 	(rombug_create_inferior), remote-mm.c (mm_create_inferior),
+ 	remote-eb.c (eb_create_inferior), remote-es.c
+ 	(es1800_create_inferior), remote-rdi.c (arm_rdi_create_inferior),
+ 	remote-sim.c (gdbsim_create_inferior), remote-utils.c
+ 	(gr_create_inferior), remote-st.c (st2000_create_inferior),
+ 	remote-nindy.c (nindy_create_inferior), remote-hms.c
+ 	(hms_create_inferior), remote-e7000.c (e7000_create_inferior),
+ 	remote-array.c (array_create_inferior), remote-adapt.c
+ 	(adapt_create_inferior): Replace "exec" with "executable" in
+ 	messages.
+
+1998-09-25  Keith Seitz  <keiths@cygnus.com>
+
+        * rdi-share/unixcomm.c: If using cygwin32, also use the SERPORT and
+        PARPORT defines for win32.
+        (Unix_MatchValidSerialDevice): For cygwin32, valid serial port names
+        start with "com", not "/dev/tty".
+        (Unix_OpenSerial): Do not use O_NONBLOCK on cygwin32.
+
+        * rdi-share/devsw.c (DevSW_Close): Free the device's state 
+        (SwitcherState) so that the device may be reopened.
+
+        * remote-rdi.c (mywritec): Send all output through gdb's *_unfiltered
+        functions, ignoring non-ASCII chars, so that non-tty UI's can snarf
+        the output from fputs_hook.
+        (mywrite): Ditto.
+        (arm_rdi_open): Set inferior_pid.
+        (arm_rdi_detach): Pop the target off the target stack so that
+        users can attach and detach multiple times.
+        (arm_rdi_close): Close the opened device and reset inferior_pid, too.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Change --enable-warnings to --enable-build-warnings.
+	* configure: Updated.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in (WARN_CFLAGS): Add -Wmissing-prototypes.
+	* configure: Regenerated.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Add --enable-warnings.
+	Adjust whitespace of other --with and --enable options so that
+	configure --help lines up correctly.
+	* aclocal.m4: Ditto.
+	* Makefile.in (WARN_CFLAGS): Add.  Set by configure.
+	* configure: Regenerated.
+
+Thu Sep 24 15:44:34 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-rdi.c: Fix formatting, remove some commented-out code.
+	(init_rdi_ops): Omit needless initializations.
+
+Wed Sep 23 18:21:03 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote.c (remote_address_masked): New function - mask address
+ 	according to REMOTE_ADDRESS_SIZE.
+	(remote_address_size): New global.
+	(hexnumstr): New function - convert arbitrary unsigned to hex.
+	(remote_write_bytes, remote_read_bytes): Use hexnumstr to
+ 	construct packet address.  Mask address when necessary.
+	(_initialize_remote): Add "set remoteaddresssize" command, set
+ 	REMOTE_ADDRESS_SIZE variable.
+
+	* NEWS: Update.
+
+Wed Sep 23 18:08:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote.c (_initialize_remote, packet_command, print_packet):
+	Pretty print code.
+
+Wed Sep 23 12:32:54 1998    <cagney@amy.cygnus.com>
+
+	* remote.c (packet_command): Test REMOTE_DESC to determine if
+ 	remote connection is open.
+
+Tue Sep 22 22:27:24 1998  Mark Alexander  <marka@cygnus.com>
+
+	Patch from Dawn Perchik <dawn@cygnus.com>:
+	* rs6000-tdep.c (pop_frame): Handle generic dummy frames.
+	(push_arguments): Likewise.
+	(frame_saved_pc): Likewise.
+	(rs6000_frame_chain): Likewise.
+	(ppc_push_return_address): New function.
+	(get_saved_register): New function.
+	* config/powerpc/tm-ppc-eabi.h: Add generic dummy frame macros.
+
+Mon Sep 21 19:29:32 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* defs.h utils.c (fputc_filtered):  New function.  Does the obvious...
+	* jv-lang.c (java_printchar):  Fix output of chars > 0xff.  Fold
+	java_emit_char into java_printchar.
+	* language.h (PRINT_LITERAL_FORM):  Reformat for readability.
+
+Mon Sep 21 14:38:03 1998  Catherine Moore <clm@cygnus.com>
+
+	* config/arm/tm-arm.h (*_BREAKPOINT): Define both little endian
+	and big endian breakpoint patterns.
+
+	* arm-tdep.c (arm_break_point_from_pc):  Insert either big endian
+	or little endian breakpoints depending upon target byte order.
+
+Fri Sep 18 07:53:08 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* sol-thread.c (sol_thread_notice_signals):  Use PIDGET when
+	passing pid down to procfs_notice_signals.
+
+Wed Sep 16 14:57:14 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* stabsread.c (resolve_symbol_reference):  Return 1 on success, 0 on
+	failure.
+	* (define_symbol):  Check return value from resolve_symbol_reference,
+	and drop symbol if it fails.
+
+Tue Sep 15 15:24:16 1998  Stu Grossman  <grossman@fencer.cygnus.com>
+
+	* stabsread.c:  Make all complaints static.
+	* Fix formatting of live range splitting code.
+	* (resolve_symbol_reference define_symbol resolve_live_range):  Change
+	errors to complaints so that bad live range symbols won't abort the
+	entire symbol table.  Handle errors by aborting just the current
+	symbol.
+	* (ref_init):  Goes away.  Folded into ref_add().
+	* (REF_MAP_SIZE):  Put parens around parameter so that args like
+	`1 + 2' get handled correctly (yes, this was a real bug).
+	* (ref_add):  Remove check for allocation failures.  Not necessary
+	when using xrealloc().  Fix pointer arithmetic problem when clearing
+	memory.  This and the previous patch prevent random SEGV's when there
+	are lots of live range symbols.
+
+Tue Sep 15 14:02:01 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdi.c: Prevent multiple attempts to close the remote
+	connection. 
+
+Tue Sep 15 10:24:17 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* printcmd.c (examine_i_type): New static - type for instructions.
+	(do_examine): For "i" format, specify examine_i_type.
+	(do_examine): Call value_at_lazy instead of value_at so that
+ 	examine data is only fetched if it is used.
+	(x_command): If examine data was not fetched, set convenience
+ 	variable "__" to void.
+	(_initialize_printcmd): Initialize examine_i_type.
+
+Sun Sep 13 01:34:59 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+ 	* blockframe.c (find_pc_sect_partial_function): use bfd section 
+	  of msymbol for end of section comparison.
+
+Fri Sep 11 14:02:49 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c: clean up several unused variables and such.
+
+Fri Sep 11 12:38:34 EDT 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	* arm-tdep.c (arm_push_arguments): fixed frame construction
+
+Thu Sep 10 20:51:23 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): guard against NULL.
+
+Wed Sep  9 19:37:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dbxread.c (IGNORE_SYMBOL): Remove definition, is never used.
+	* os9kread.c: Remove comment mentioning IGNORE_SYMBOL.
+
+Wed Sep  9 11:39:05 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* blockframe.c(find_pc_sect_partial_function): look for min syms in
+	  the same section when trying to guess the end of a function.
+	* symfile.c(list_overlays_command): use print_address_numeric
+	* remote-sim.c: export simulator_command
+
+1998-09-08  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* breakpoint.c (bpstat_stop_status):  Declare a bp match if the
+	current fp matches the bp->fp OR if the current fp is less than
+	the bp->fp if we're looking at a bp_step_resume breakpoint.
+
+Tue Sep  8 19:42:58 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook,
+	not currently used.
+	* symfile.c (allocate_symtab): Deprecate use of
+	INIT_EXTRA_SYMTAB_INFO here.
+
+Fri Sep  4 15:33:25 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* README: Update remote debugging and testsuite info.
+
+Thu Sep  3 13:50:20 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/mn10300/tm-mn10300.h (FP_REGNUM): Redefine to be a
+	pseudo-register, not the same as a3.
+	(D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define.
+	* mn10300-tdep.c (fix_frame_pointer): New function.
+	(set_movm_offsets): Use register number macros instead of
+	hard-coded constants.
+	(mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM.
+	(mn10300_frame_chain):  Fix to handle redefinition of FP_REGNUM;
+	use register number macros instead of hard-coded constants;
+	add missing parameter to call of mn10300_analyze_prologue.
+	(mn10300_frame_saved_pc): Use register number macros instead of
+	hard-coded constants.
+
+Tue Sep  1 12:04:57 EDT 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	Changes to support/fix ARM/ELF port.  Use MAKE_MSYMBOL_SPECIAL for
+	both ELF and COFF;
+	* elfread.c (elf_symtab_read): use ELF specific macro
+	* coffread.c (coff_symtab_read): use COFF_MAKE_MSYMBOL_SPECIAL()
+	* arm-tdep.c: separate COFF and ELF thumb processing
+			disable --mapcs-float processing
+	* dwarf2read.c: Disabled building of minimal symbols
+	* config/arm/tm-arm.h: new macros for distinguishing arm/thumb
+	* config/mips/tm-mips.h: use ELF specific macro
+
+Mon Aug 31 15:42:10 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* top.c (context_hook): Define.
+
+Tue Aug 25 13:21:58 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* ax-gdb.c (gen_var_ref): Allow for typedef types.
+	(gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto.
+
+Mon Aug 24 18:29:03 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (collect_symbol): Handle register doubles that
+	are stored in two registers.
+
+Mon Aug 24 14:39:08 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sh-stub.c (undoSStep): Improve comment.
+	* sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
+	same method on both 32-bit and 64-bit machines.
+	* sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
+	support hardware breakpoints.
+	* config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
+
+1998-08-20  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * rdi-share/Makefile.am (INCLUDES): Fix typeo.
+        * rdi-share/Makefile.in: Regenerated.
+
+1998-08-19  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'.
+        * rdi-share/Makefile.in: Regenerated.
+
+1998-08-19  Keith Seitz  <keiths@cygnus.com>
+
+	* v850ice.c (v850ice_stop): New function to stop the ICE.
+	(v850ice_load) Pass filename to ICE DLL.
+	(ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb
+	commands -- let the GUI do it so that it can retain control
+	of the display.
+
+Wed Aug 19 15:53:52 1998  Anthony Green  <green@hoser.cygnus.com>
+
+	* i386v4-nat.c: Include sys/reg.h if present.
+
+Wed Aug 19 03:07:53 1998  Richard Henderson  <rth@cygnus.com>
+
+	* config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
+
+1998-08-18  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+        * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to
+        make sure we stop after the frame pointer is locaded and backtrace
+        prints an accurate stack.  Complements changes made on Mon Jul 27
+        10:45:56 1998
+        (decode_line_2): Replaced the whitespace after ">" in a prompt
+        which has been taken away by changes made on Sun Jul 19 02:11:45
+        1998
+
+1998-08-18  Keith Seitz  <keiths@cygnus.com>
+
+	* stack.c: Define new hook, selected_frame_level_changed_hook, which
+	will be called whenever the selected stack level changes.
+	(select_frame): Call the selected_frame_level_changed_hook.
+
+Tue Aug 18 18:03:42 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-rdi.c (arm_rdi_open): Pass serial device name to
+ 	Adp_OpenDevice, and include it in error reports.
+
+1998-08-18  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Add more header files to AC_CHECK_HEADERS.
+	* configure: Regenerated.
+
+	* command.c: Include wait.h or sys/wait.h if present.
+	* inftarg.c: Ditto.
+	* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
+	on autoconf test.
+	* infptrace.c: Ditto.
+
+	* expprint.c: Include ctype.h for isprint prototype.
+	* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
+	* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if 
+	present, based on autoconf test.  
+
+	* utils.c: Include curses.h and term.h if present.
+	(puts_debug): Change 'carriage_return' local variable to return_p
+	to avoid name clash.
+
+	* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
+	determine it with autoconf.
+        * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
+        with autoconf.
+	* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it 
+	with autoconf.
+	* config/i386/nm-i386v.h: Ditto.
+	* config/i386/nm-symmetry.h: Ditto.
+	* config/m88k/xm-cxux.h: Ditto.
+	* config/m88k/xm-dgux.h: Ditto.
+
+	* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
+	* config/m68k/nm-delta68.h: Removed.
+
+Fri Aug 14 11:14:03 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c (set_movm_offsets): Change second argument to
+	be the actual args to movm itself.  All callers changed.  Only set
+	fi->fsr.regs[x] if reg X is saved by the movm instruction.
+
+Fri Aug 14 04:18:23 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* sol-thread.c (lwp_to_thread):  Fix error message for failing
+	td_ta_map_lwp2thr call.
+	(ps_lgetLDT):  Mask off upper bits in GS register when comparing
+	with selector.
+
+Wed Aug 12 16:30:01 1998  Frank Ch. Eigler  <fche@cygnus.com>
+ 
+	* remote-sim.c (simulator_command): Reset register cache after
+	simulator command.
+
+Wed Aug 12 09:00:26 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* expprint.c (dump_prefix/postfix_expression):  Don't try to print
+	type expressions.
+
+Tue Aug 11 11:33:25 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-typeprint.c (c_print_type):  Don't crash if varstring is null.
+	* expprint.c expression.h (dump_expression):  Rename to
+	dump_prefix_expression. 
+	* Print out the expression in normal form.  Call print_longest
+	instead of trying to do it ourselves.
+	* (dump_postfix_expression):  New function, prints out the expression
+	with indentation and better formatting and interpretation.
+	* parse.c (parse_exp_1):  Put calls to dump expressions under ifdef
+	MAINTENANCE_CMDS and expressiondebug variable.
+
+Thu Aug 6 13:20:02 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* infrun.c (wait_for_inferior): use stop_func_name instead of 
+	  stop_func_start to decide that no debug info exists.
+
+Thu Jul 30 13:53:50 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mask_address_p): New variable.
+	(mips_addr_bits_remove): Test mask_address_p to decide whether
+	to mask off the upper 32 bits of addresses.
+	(_initialize_mips_tdep): Add command to set mask_address_p.
+	(mips_call_dummy_address): New function.
+	* config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
+	call mips_call_dummy_address.
+
+1998-07-29  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* symfile.c (add_symbol_file_command): Test for the from_tty
+	parameter and avoid query when not interactive.
+
+Mon Jul 27 16:11:42 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (remote_set_transparent_ranges): new function.
+	Send the start and end addresses of all loadable read-only
+	sections down to the trace target, so that it can treat them
+	as "transparent" (ie. don't care if they were collected or not).
+
+Mon Jul 27 15:38:07 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
+	for setting frame address in optimized code; made unnecessary
+	by compiler fixes.
+
+Mon Jul 27 10:45:56 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* symtab.c (decode_line_1): For minimal symbol, call 
+	find_pc_sect_line() to make sure the line number gets set 
+	properly.
+	(print_symbol_info): Redeclare function void.
+
+1998-07-27  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15.  The
+	stack pointer et al are synthesized from the SP_REGNUM (etc)
+	defines and should not be mentioned in REGISTER_NAMES.
+
+Fri Jul 24 14:41:19 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (encode_actions): Treat register names and simple
+	variable names as special cases and don't convert them to byte-
+	codes: these things can be collected far more efficiently 
+	without invoking the bytecode interpreter.
+
+Fri Jul 24 13:32:46 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
+	work on hosts of any endianness.
+	* config/i386/tm-i386v.h: Ditto.
+
+Fri Jul 24 07:41:12 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10300-tdep.c (set_movm_offsets): New helper function
+	for mn10300_analyze_prologue.
+	(mn10300_analyze_prologue): Simplify by factoring out common code.
+	Fix bugs in setting frame address for optimized code.
+	Use read_memory_nobpt instead of target_read_memory.
+
+Thu Jul 23 17:01:17 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (collect_symbol): handle LOC_ARG case.
+
+Thu Jul 23 15:07:40 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
+	in a function prologue before the SAVE instruction.
+	(sparc_frame_saved_pc): Ditto.
+	* config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
+
+Thu Jul 23 14:58:09 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* i386-tdep.c (i386_get_frame_setup): Recognize function
+	prologues in code compiled with -fcheck-stack.
+
+Thu Jul 23 14:49:27 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* remote-mips.c (remote_mips_insert_hw_breakpoint,
+	remote_mips_remove_hw_breakpoint): New functions for hardware
+	breakpoints on LSI targets.
+	* config/mips/tm-embed.h (target_remove_hw_breakpoint,
+	target_insert_hw_breakpoint): Define to call
+	remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
+	respectively.
+
+1998-07-21  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* source.c (print_source_lines): Print "No such file or directory"
+	just once.
+	(directory_command): same as above; resets if user issues dir.
+
+Sun Jul 19 02:11:45 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* symtab.c (decode_line_2): Instead of printing a prompt
+	and calling command_line_input() without a prompt, just
+	call it with the proper args.  This makes the GUI work too.
+
+Fri Jul 17 9:26:50 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* blockframe.c (find_pc_sect_partial_function): allow for the possi-
+	  bility of multiple symbols at the same address when finding high.
+	* breakpoint.c (resolve_sal_pc): if the function based section lookup
+	  fails, try getting the section from the minimal symbol table.
+	* parse.c (write_exp_msymbol): use symbol_overlayed_address to get
+	  the LMA of a minimal symbol if unmapped.
+	* symtab.c (find_line_symtab): change interface to return symtab 
+	  containing the best linetable found.
+	  (decode_line_1): use find_line_symtab to set val.symtab. This should
+	  improve support for source files with multiple symtabs.
+
+Wed Jul 15 11:51:33 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Fix violations of GNU coding standard.
+
+	* breakpoint.c: Export delete_command.
+
+	* infcmd.c: Export continue_command, stepi_command, and nexti_command.
+
+	* Makefile.in: Add target for v850ice.o.
+
+	* configure.tgt: Add cygwin32 dependencies for v850 ice.
+
+Wed Jul 15 10:58:29 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
+	have an associated directory.
+
+Mon Jul 13 15:21:04 1998  Mark Alexander  <marka@cygnus.com>
+
+	* utils.c (puts_debug): Display non-printable characters in hex
+	instead of octal.
+
+Thu Jul  9 16:16:47 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c (mn10300_generic_register_names): New variable.
+	(set_machine_hook): New function.  Copy the appropriate register
+	names into reg_names.
+	(_initialize_mn10300_tdep): Set up to call set_machine_hook.
+	* tm-mn10300 (NUM_REGS): Bump to 32.
+	(REGISTER_NAMES): Updated accordingly.
+
+
+Tue Jul 7 7:40:13 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
+
+Thu Jul  2 15:57:58 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* breakpoint.c (resolve_sal_pc): Accept absence of innermost
+	Lexical block for breakpoint resolution.
+
+Thu Jul 2 10:22:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
+	section, but just don't add a 2nd minimal symbol if this is an .mdebug 
+	section in an ELF file.
+
+1998-07-01  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* Makefile.in (ax-general.o): Depend on $(defs_h) too.
+	(ax_h): Bother to define this.
+
+Mon Jun 29 19:01:18 1998  Jim Wilson  <wilson@cygnus.com>
+
+        * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
+
+Sun Jun 28 11:35:48 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	Improve support for SunPro F77.
+	* dbxread.c (end_psymtab, process_one_symbol):  Handle minimal
+	symbols with trailing underscore names.
+	* minsyms.c (find_stab_function_addr):  Ditto.
+	* dbxread.c (process_one_symbol):  Ignore N_ALIAS for now.
+	* partial-stab.h (case N_ALIAS):  Ditto.
+	* stabsread.c (read_sun_builtin_type):  Handle boolean types.
+
+Fri Jun 26 14:03:01 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
+	TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
+	new search_symbols.
+	Add prototype for search_symbols and free_search_symbols.
+
+	* symtab.c (list_symbols): Rewrite to use new search_symbols.
+	(file_matches): New helper function for search_symbols.
+	(free_search_symbols): New function which frees data returned from
+	search_symbols.
+	(print_symbol_info): New helper function which prints info about a
+	matched symbol to stdout. Extracted from old list_symbols.
+	(print_msymbol_info): New helper function which prints info about
+	a matched msymbol to stdout. Extracted from old list_symbols.
+	(symtab_symbol_info): Extracted from old list_symbols.
+	(variables_info): Use symtab_symbol_info.
+	(functions_info): Use symtab_symbol_info.
+	(types_info): Use symtab_symbol_info.
+	(rbreak_command): Rewrite to use new search_symbols.
+
+Thu Jun 25 22:38:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
+	alignment for inferior calls.
+
+Wed Jun 24 23:17:12 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
+	of jsr target address.
+
+Tue Jun 23 19:37:46 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL):  Don't
+	zero upper byte of address.
+
+Tue Jun 23 17:32:26 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* rs6000-tdep.c (pop_dummy_frame): use memcpy. 
+	(push_arguments): use memset.
+	(various other places): fix up indentation and long lines.
+
+Tue Jun 23 11:58:35 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in: s/lXext/-lXext/ for Jillian's change.
+
+Tue Jun 23 11:14:04 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* source.c (find_source_lines): fix indentation.
+
+	* config/mips/tm-irix5.h: Modify to work better on irix 6, by
+	making FP registers 8 bytes instead of 4.
+	REGISTER_BYTES: redefine.  REGISTER_BYTE(): redefine.
+	REGISTER_VIRTUAL_TYPE: redefine.  MIPS_LAST_ARG_REGNUM: redefine.
+	* irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
+	* mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish 
+	targets with 8-byte FP registers (don't use TARGET_MIPS64).
+	(STACK_ARGSIZE): new macro, how much space is taken up on the
+	stack for each function argument (don't use TARGET_MIPS64).
+	(mips_push_arguments): modify logic to work better on Irix 6
+	(n32 ABI).
+
+Tue Jun 23 12:29:53 1998  Jillian Ye  <jillian@cygnus.com>
+
+        * configure.in: Add -lXext to mips_extra_libs
+	* configure: Regenerated.
+   
+Sun Jun 21 09:31:12 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
+  	Changed to pass PC as arg and return 1 if valid (0 otherwise).
+	* symtab.h: Change prototype to match.
+	* symtab.c (find_line_pc_range): Use new interface.
+	* breakpoint.c (resolve_sal_pc): Ditto.
+
+Wed Jun 17 15:50:00 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* parse.c (target_map_name_to_register): Check target specific 
+	  aliases *first* so that it can over-ride architectural names
+
+Wed Jun 17 17:13:38 1998  Said Ziouani  (saidz@park-street.cygnus.com)
+
+	* remote-sds.c (sds_start_remote): Fix printf call.
+
+Tue Jun 16 16:32:08 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
+	crash when in "start".
+
+Tue Jun 16 14:38:40 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* dbxread.c: reset function_start_offset after a finishing N_FUN 
+	  is seen.
+	* remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
+	  target vectors as needed.
+
+Sun Jun 14 08:46:25 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
+	  CUR_SYMBOL_VALUE as CORE_ADDR instead of long
+	* buildsym.[ch]: export pending_blocks list
+
+Sat Jun 13 13:02:32 1998  Dawn Perchik (dawn@cygnus.com)
+
+	* remote.c: Fix remote help string to match that of help.exp.
+
+Fri Jun 12 14:22:55 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in (LIBS): Add -lw to the list of libraries if needed.
+
+Thu Jun 11 15:05:10 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* btowc.c: Removed.
+	* configure.in: Don't see if we need to replace btowc().
+	* Makefile.in: Don't include LIBOBJS.
+	* configure: Regenerated.
+	* gnu-regex.c (regex_compile): Only support i18n [:foo:] if
+	we have btowc().
+
+Wed Jun 10 15:39:14 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-exp.y:  Fix problems with parsing "'foo.bar'::func".  
+	Some languages allow symbols with dots.
+
+	* gdbtypes.c (check_stub_method):  Cosmetic.  Use more descriptive
+	names for parameters.
+
+	* jv-exp.y:  Parser now accepts primitive types.
+	* (parse_number):  Use correct ifdef for scanf long double support.
+	* jv-lang.c (java_array_type):  Initial cut at array support.
+
+	* language.c language.h (set_language):  Now returns previous language.
+
+	* symtab.c (find_methods):  Make static.  Cosmetic changes, including
+	indentation, and adding descriptive comments.  Move local variable 
+	defs into the block they are used in.
+	* Don't call check_stub_method any more.  Use gdb_mangle_name to
+	generate the full method name.  find_method doesn't need all the other
+	goobldegook that check_stub_method does.
+	* (gdb_mangle_name):  Use more descriptive names for parameters.  Fix
+	comment.
+	* (lookup_partial_symbol lookup_block_symbol):  Check for java to
+	ensure we can find mangled names.
+	* (decode_line_1):  Move local variable defs into the block they are
+	used in.  (Improves code readability.)
+
+Wed Jun 10 18:04:35 1998  Frank Ch. Eigler  <fche@cygnus.com>
+ 
+	* gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
+	all-positive enum.
+	(create_set_type): Ditto for all-positive set values.
+	* values.c (unpack_field_as_long): Check for typedef in struct
+	field unpacking.
+
+Wed Jun 10 14:06:05 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in: Add some tests for gnu-regex.c's benefit.
+	See if btowc() function is provided in C library.
+	* configure, config.in: Regenerated.
+	* Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
+	if necessary.
+	* btowc.c: New file.
+
+	* gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
+	benefit.
+	Drop namespace preserving defines for now.
+
+Wed Jun 10 11:53:42 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c: Include "gnu-regex.h", not "regex.h".
+
+Wed Jun 10 11:34:07 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
+	to stay consistent with the rest of GDB.
+
+Wed Jun 10 11:27:39 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
+
+Wed Jun 10 10:58:18 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* printcmd.c (disassemble_command): move overlay mapping code
+	"up" into find_pc_partial_function.
+	* blockframe.c (find_pc_partial_function): adjust start address
+	and end address for overlays (mapped vs. unmapped addresses),
+	so that all callers of this function may benefit.
+	* m32r-tdep.c (m32r_skip_prologue): adjust indentation.
+
+Mon Jun  8 16:08:10 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* objfiles.c (add_to_objfile_sections): All targets to define
+	  TARGET_KEEP_SECTION to permit them to retain bfd sections that
+	  GDB would otherwise have discarded.
+
+Fri Jun  5 13:56:19 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
+
+Thu Jun  4 18:35:04 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (init_extended_remote_ops): Make extended_remote_ops
+	by copying from remote_ops, move it and init_remote_ops to
+	usual place at end of file, remove "void" from arg lists.
+
+Thu Jun  4 17:51:06 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
+	on bi-endian machines.
+	(sparc_extract_return_value): Handle values smaller than int on
+	machines with little-endian data.
+	(sparc_target_architecture_hook): Set bi_endian flag.
+
+Thu Jun  4 12:14:48 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* printcmd.c (disassemble_command): Fix off-by-one error for
+	disassembling functions in unmapped overlay sections.
+
+Thu Jun  4 10:15:03 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* remote.c: merged.
+
+        - Jim Blandy  <jimb@zwingli.cygnus.com>
+	(print_packet, remote_packet_command): New functions.
+        (_initialize_remote): Register the remote-packet command.
+        - David Taylor  <taylor@texas.cygnus.com> 
+        (_initialize_remote): remote-compare is now
+        compare-sections.
+        - Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+         (remote_compare_command): added warning, issued in case
+        of mismatch only.
+
+Thu Jun  4 08:25:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* remote.c (remote_compare_command): New function, new command.
+	Compare object file binary image with corresponding memory on
+	remote target.  Report differences.
+
+Tue Jun  2 19:05:04 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_target_architecture_hook): Set target
+	byte order only when it's selectable.
+
+Tue Jun  2 02:01:56 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_target_architecture_hook): New function to
+	set endianness based on machine type.
+	(_initialize_sparc_tdep): Initialize target_architecture_hook.
+	(sparc_print_register_hook): Print PSR and FPSR in fancy format
+	on 32-bit machines.
+	* config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
+	call sparc_print_register_hook instead of using inline code.
+	* config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
+
+Thu May 28 17:19:14 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Check for NULL from getenv on CYGWIN32.
+
+Thu May 28 09:41:44 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* monitor.c (monitor_vsprintf): Handle %%.  Patch courtesy of
+	Felix Lee (flee@cygnus.com)
+
+Thu May 28 00:27:35 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* mips-tdep.c (mips_push_dummy_frame):  Fix calculation of
+	PROC_REG_OFFSET and PROC_FREG_OFFSET.
+
+Mon Apr 27 14:37:49 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
+ 	FP_RAW_REGNUM use the same register location.
+
+	* v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
+ 	FP_REGNUM.
+	(v850_frame_chain): Ditto.
+
+	* config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
+	(NUM_REGS): Update.
+	(FP_REGNUM): Update.
+	(FP_RAW_REGNUM): Define.
+
+Wed May 27 14:22:31 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Convert the path returned from getenv to a posix
+	path on cygwin32 hosts.
+
+Mon May 25 13:31:27 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* remote.c (remote_open_1): If an error occurs starting the remote, 
+	pop the target AND return.
+
+Sat May 23 02:23:09 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* dwarf2read.c (read_subroutine_type):  Set TYPE_FLAG_PROTOTYPED
+	on C++ functions.
+	* valops.c (value_arg_coerce):  Add new argument to indicate whether
+	the function has a prototype, handle integer and float promotions
+	accordingly.
+        (call_function_by_hand):  Always call value_arg_coerce, pass down
+	prototype information.
+
+Fri May 22 10:56:36 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* remote.c (_initialize_remote): Typo extended__remote
+
+Thu May 21 13:14:25 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
+	(_initialize_gnu_nat): Call new init
+	* mac-nat.c (init_child_ops): Ditto.
+	(_initialize_mac_nat): Ditto.
+	* monitor.c (init_base_monitor_ops): Ditto.
+	(_initialize_remote_monitors): Ditto.
+	* ppc-bdm.c (init_bdm_ppc_ops): Ditto.
+	(_initialize_bdm_ppc): Ditto.
+	* remote-adapt.c (init_adapt_ops): Ditto.
+	(_initialize_remote_adapt): Ditto.
+	* remote-array.c (init_array_ops): Ditto.
+	(_initialize_array): Ditto.
+	* remote-bug (init_bug_ops): Ditto.
+	(_initialize_remote_bug): Ditto.
+	* remote-e7000.c (init_e7000_ops): Ditto.
+	(_initialize_remote_e7000): Ditto.
+	* remote-eb.c (init_eb_ops): Ditto.
+	(_initialize_remote_eb): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	(_initialize_es1800): Ditto.
+	* remote-hms.c (init_hms_ops): Ditto.
+	(_initialize_remote_hms): Ditto.
+	* remote-mm.c (init_mm_ops): Ditto.
+	(_initialize_remote_mm): Ditto.
+	* remote-nindy.c (init_nindy_ops): Ditto.
+	(_initialize_nindy): Ditto.
+	* remote_nrom.c (init_nrom_ops): Ditto.
+	(_initialize_remote_nrom): Ditto.
+	* remote-os9k (init_rombug_ops): Ditto.
+	(_initialize_remote_os9k): Ditto.
+	* remote-rdi.c (init_rdi_ops): Ditto.
+	(_initialize_remote_rdi): Ditto.
+	* remote-rdp.c (init_remote_rdp_ops): Ditto.
+	(_initialize_remote_rdp): Ditto.
+	* remote-sds.c (init_sds_ops): Ditto.
+	(_initialize_remote_sds): Ditto.
+	* remote-sim.c (init_gdbsim_ops): Ditto.
+	(_initialize_remote_sim): Ditto.
+	* remote-st.c (init_st2000_ops): Ditto.
+	(_initialize_remote_st2000): Ditto.
+	* remote-udi.c (init_udi_ops): Ditto.
+	(_initialize_remote_udi): Ditto.
+	* remote-vx.c (init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+	(_initialize_vx): Ditto.
+	* remote.c (init_remote_ops): Ditto.
+	(init_extended_remote_ops): Ditto.
+	(_initialize_remote): Ditto.
+	* sparcl-tdep.c (init_sparclite_ops): Ditto.
+	(_initialize_sparcl_tdep): Ditto.
+	* v850ice.c (init_850ice_ops): Ditto.
+	(_initialize_v850ice): Ditto.
+	* win32-nat.c (init_child_ops): Ditto.
+	(_initialize_inftarg): Ditto.
+
+1998-05-21  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (const_var_ref): Don't handle function names.  I don't
+	want to implement all the "usual unary conversion" rules for
+	constants.
+	(gen_usual_unary): Turn "function" values into "pointer to
+	function" values, in accordance with ANSI.
+	(gen_deref): Don't do the usual unary conversions here.  Let the
+	caller do it.  Note that dereferencing a function pointer yields
+	a function designator, which we call an rvalue, not an lvalue.
+	(gen_address_of): Handle functions specially.
+	(gen_struct_ref): Perform the usual unary conversions before
+	calling gen_deref.
+	(gen_expr): In case for the prefix '*' operator, call
+	gen_usual_unary manually.
+
+Wed May 20 15:29:41 1998  Gavin Koch  <gavin@cygnus.com>
+
+	* mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
+	* mips/tm-tx39l.h: Same.
+
+Wed May 20 10:12:11 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* m32r-tdep.c (decode_prologue): Handle frames compiled with -Os.
+        Split out as separate function called by skip prologue and scan
+        prologue. new formula handles optimization in which the prologue
+        is interleaved with the body of the function. Also recognizes new
+        variations of prologue encoding.  Use of frame pointer is
+        essential to debugging, -fno-omit-frame-pointer
+        (m32r_skip_prologue): Call decode prologue, ignore line info
+        (m32r_scan_prologue): Call decode prologue, ignore line info.
+
+Tue May 19 17:23:54 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* w89k-rom.c (_initialize_w89k): Call new init function
+	(init_w89k_cmds): Convert to dynamic initialization of monitor_ops 
+        data structure for forward compatability with additions to the
+        data structure.
+	* dbug-rom.c (_initialize_dbug_rom): ditto
+        (init_dbug_cmds): ditto
+	* m32r-rom.c (_initialize_m32r_rom): ditto
+	(init_m32r_cmds): ditto
+
+Tue May 19 14:54:11 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (memrange_cmp): use const void * args to avoid
+	ANSI compiler warnings.
+
+1998-05-19  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
+	gen_bitfield_ref, gen_expr): Call error, not abort.
+	* ax-general.c (read_const, generic_ext, ax_trace_quick,
+ 	ax_label, ax_const_d, ax_reg, ax_print): Same.
+
+	* tracepoint.c: Remove the $(...) syntax for memranges.
+	(validate_actionline, encode_actions, trace_dump_command): Remove
+	clauses for the $(...) syntax.
+	(parse_and_eval_memrange): Function deleted.
+	(_initialize_tracepoint): Update function description. 
+
+	* ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
+ 	subcommand of "maintenance", as it should have been from the
+	beginning.  #include "gdbcmd.h", to get the declaration for
+	maintenancelist.
+	* Makefile.in: Document that dependency.
+
+Tue May 19 12:00:58 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): new function, to access
+	traceframe_number for use of the GUI.
+
+	* tracepoint.h: added prototype for get_traceframe_number.
+
+Mon May 18 13:34:27 1998  Keith Seitz  <keiths@cygnus.com>
+
+        * dbxread.c (process_one_symbol): If block addresses are relative to
+        function start addresses, reset function_start_address whenever a new
+        source file is seen.
+
+Mon May 18 13:04:27 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): make sure to advance
+	arg pointer even if we fail to parse a useful number.  Otherwise,
+	since this function is called in a loop, it may loop forever!
+	Also change strtol call to allow arbitrary radix.
+	(map_args_over_tracepoints (and other places)): add QUIT; call
+	to loop, to allow breakout using control-C.  Not all loops were
+	analyzed to make sure they could terminate cleanly, but even
+	terminating with a messed-up tracepoint list would be better 
+	than not terminating at all!
+	(tdump_command): check to see if we're connected to a trace-
+	capable target (currently only "remote") before doing anything 
+	else.
+
+Sat May 16 22:21:48 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
+ 	frame struct before extracting saved register offsets.
+
+Fri May 15 22:47:45 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (encode_actions): fix typo in printf format string.
+
+1998-05-15  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Implement a few more tracing operators: ^ | & ~ !
+	* ax-gdb.c (gen_integral_promotions, gen_logical_not,
+	gen_complement): New functions.
+	(gen_binop): New argument MAY_CARRY, indicating whether we need to
+	correct the upper bits of the value after performing the
+	operation.  Callers changed.
+	(gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
+	BINOP_BITWISE_XOR here as well, by calling gen_binop.  Handle
+	UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
+
+	* ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
+	sign extension.
+
+	* ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
+	to match the ANSI C standard better.  Callers changed.
+
+	* ax-gdb.c (gen_traced_pop): Add prototyped declaration.
+
+Fri May 15 18:18:38 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (stringify_collections_list): return a collection
+	of strings rather than a single string.
+	(free_actions_list): new function.
+	(encode_actions): process collection of strings returned by
+	stringify_collections_list.
+
+1998-05-15  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_traced_pop): New function.
+	(gen_expr): Call it for comma operator.
+	(gen_trace_for_expr): Call it, instead of writing it out.
+
+	Add facilities for sending arbitrary packets to the remote agent.
+	There are a bunch of improvements to make (make it generic; handle
+	'O' replies properly), but I just want to get this onto the branch.
+	* remote.c (print_packet, remote_packet_command): New functions.
+	(_initialize_remote): Register the remote-packet command.
+
+Thu May 14 17:52:31 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* tracepoint.c: move actionline_type definition to tracepoint.h.
+	(validate_actionline): make non static.
+
+	* tracepoint.h: move actioline_type definition  from tracepoint.c.
+        (validate_actionline) moved prototype from tracepoint.c.
+
+Thu May 14 11:49:18 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): add additional error
+	checking, remove some dead code.
+	(encode_actions): additional cleanups.
+	(trace_find_command): remove some dead code.
+	(trace_find_pc_command): ditto.
+	(trace_find_tracepoint_command): ditto.
+	(trace_find_line_command): ditto.
+	(trace_find_range_command): ditto.
+	(trace_find_outside_command): ditto.
+
+Thu May 14 5:51:00 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* symtab.c (decode_line_1): set section for "break *<addr>"
+
+Wed May 13 20:58:02 1998  Mark Alexander  <marka@cygnus.com>
+
+	* corefile.c (reopen_exec_file): Reopen the exec file if
+	it has changed.
+
+Wed May 13 15:22:02 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (fetch_instruction): New function.
+	(single_step, sparc_init_extra_frame_info, examine_prologue):
+	Use fetch_instruction instead of read_memory_integer
+	to ensure that instructions are always read as big-endian.
+
+Wed May 13 14:42:21 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: Add AC_FUNC_ALLOCA.
+	* defs.h: Check HAVE_ALLOCA_H rather than sparc.  Add _AIX pragma
+	alloca.
+	* configure: Rebuild.
+	* Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
+	targets.
+
+Wed May 13 11:19:08 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (trace_command): Remove old diagnostic code that was
+	preventing tracepoints from being defined with a full-path filename.
+
+Tue May 12 13:17:35 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Check for typedef in type
+ 	tree before clearing bitfield information.
+
+1998-05-11  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
+	gen_mul and gen_div, and handle `%' op as well.  Correctly tests
+	type of arguments.
+	(gen_expr): Factor out common code in binary arithmetic operators.
+	Add support for `%'.
+	(gen_mul, gen_div): Removed.
+
+Thu May  7 14:49:38 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
+	%o0-%o5 as 64-bit values; compensate for stack bias.
+	(USE_STRUCT_CONVENTION): We only pass pointers to structs
+	if they're larger than 32 bytes.
+	(REG_STRUCT_HAS_ADDR): Ditto.
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
+ 	instead of read_register. If the target is a sparc64 and the frame
+ 	pointer is odd, compensate for the stack bias.
+	(get_saved_register): Use read_sp().
+	(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
+	(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
+ 	save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
+	(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
+ 	CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
+ 	dummy frame.
+	(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
+ 	the FP is odd, compensate for stack bias.
+	(sparc_store_return_value): Right-justify the return value before
+ 	writing it to %o0.
+	(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
+ 	sparc64.
+	(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
+ 	sparc64_write_fp, sp64_push_arguments,
+ 	sparc64_extract_return_value): New functions to support the
+ 	sparc64 ABI.
+
+	* dwarfread.c (handle_producer): Set processing_gcc_compilation to
+ 	the right version number.
+
+	* dwarf2read.c (read_file_scope): Assume we're processing
+	GCC2 output.
+
+Wed May  6 16:34:03 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* somsolib.c: Include gdb_stat.h.
+
+Mon May  4 18:34:01 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* ax-gdb.c (gen_mul): new function; (gen_div): new function;
+	(gen_expr): add support for * and / operators, call gen_mul and
+	gen_div as appropriate.
+
+Mon May  4 16:24:22 1998  Mark Alexander  <marka@cygnus.com>
+
+	* defs.h (make_run_cleanup): Declare.
+	* solib.c (find_solib): Pass correct number of arguments to
+	make_run_cleanup.
+
+Mon May  4 07:08:25 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (trace_actions_command): actions command must set
+	step_count to zero (in case previous actions have set it but the
+	new set does not).
+
+Sat May  2 09:35:07 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* ocd.h:  Add new flags, function codes, and processor types to 
+	support new Wiggler capabilities.
+	* (ocd_write_bytes_size):  New function to allow atomic writes of
+ 	memory in sizes larger than a byte.
+
+	* ser-unix.c (baudtab):  Add 57600, 115200, 230400, and 460800 baud.
+
+Fri May  1 19:51:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Do not override supplied
+ 	bitfield size for a range type value.
+
+	* gdbtypes.c (create_range_type): For a range with positive 
+	lower limit, declare range type as unsigned.
+
+Fri May  1 10:58:34 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* monitor.c: Turn off debug
+
+Fri May  1 09:29:56 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* breakpoint.c (delete_command):  Skip internal breakpoints when
+	all breakpoints are requested.
+
+	* stabsread.c (define_symbol):  Record parameter types from Sunpro
+	function stabs in the TYPE_FIELDS of the function type.
+
+Thu Apr 30 15:59:54 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (config-check-targets, config-check-hosts): Removed.
+
+1998-04-30  Paul Eggert  <eggert@twinsun.com>
+
+        * Makefile.in (maintainer-clean):
+        Don't get ahead of yourself and delete Makefile
+        before running `make'.
+        (local-maintainer-clean, do-maintainer-clean): New rules.
+
+Wed Apr 29 14:02:59 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* ax-gdb.c (gen_add): when adding a pointer and an int, use
+	the size of the pointer, not the int (typo) to decide how
+	to extend the result.
+
+Wed Apr 29 10:20:40 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* monitor.h: Defined additional hooks for dmpregs, configure_hooks
+	and wait_filter. These additions require that all ROM monitor
+	interfaces be recoded to initialize monitor ops using assignments
+	rather than static structure initialization.  Added new bits to
+	flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
+
+        * monitor.c (RDEBUG): Conditional tracing throughout the file.
+        (fromhex): Now recognized upper cse hex digits
+        (monitor_printf_noecho):
+        (monitor_readchar): Tracing interferes with input timing.
+        (monitor_open): Register different memory write functions with
+        dcache_init if MO_HAS_BLOCKWRITES.
+        (flush_monior_dcache): Added as an additional utilty.
+        (monitor-resume): Call continue hook if one has been supplied.
+        (monitor_wait_filter): New function Factored out of monitor wait
+        and used if alternate wait-filter has not been provided.
+        (monitor_wait): call alternate wait filter if provided.  Call
+        monitor_dump_regs, a new function factored out from inline code.
+        (monitor_dump_block): A new function used as a utility when
+        monitors must dump several blocks of registers using different
+        commands.
+        (monitor_dump_regs): Call alternate function if provided. Uses new
+        hook in monitor.h.
+        (monitor_write_memory): Engage previouly added hook
+        MO_FILL_USES_ADDR.
+        (monitor_write_even_block): new function supports writing long
+        blocks of 4byte words.
+        (longlongendswap): new internal function
+        (monitor_write_memory_longlongs): new function writes large blocks
+        using command to enter a long long.
+        (monitor_write-memory_block): new Function figures out which block
+        mod to use.
+        (monitor_read_memory): Can now handle dump formats in which the bytes 
+        preceeding the requested data is not printed.
+
+Tue Apr 28 19:41:33 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
+	`memrange'.
+
+	* tracepoint.c (memrange_cmp): Fixed typo in function intro.
+
+Tue Apr 28 17:41:20 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * symfile.c (overlay_auto_command): Add forgotten parameter
+ 	definitions.
+        (overlay_manual_command, overlay_off_command): Likewise.
+        (overlay_load_command): Likewise.
+        * tracepoint.c (memrange_cmp): Parameters have type void *, not
+        struct memrange *.
+
+Tue Apr 28 11:08:25 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
+
+Mon Apr 27 14:32:21 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
+	make it work on the simulator.
+	(FIX_CALL_DUMMY): Convert to function call instead of inline code.
+	(sparc_fix_call_dummy): Declare.
+	* sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
+	old FIX_CALL_DUMMY macro, with additional fixes for simulator.
+	(sparc_push_dummy_frame): Set registers differently on simulator
+	to prevent corrupted register window save areas.
+
+Mon Apr 27 13:46:40 1998  John Metzler  <jmetzler@cygnus.com>
+
+        * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
+        Convert all static initializations of monitor ops structures to
+        executable initializations in order that additions to the data
+        structure definition can me made without repeating this editing
+        exercise.                                            
+        * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
+        * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
+        * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
+        * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.       
+        * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
+        * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
+        * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
+        * remote-est.c (_initialize_est, init_est_cmds): Ditto.
+        * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
+
+Mon Apr 27 10:43:04 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * gdb_string.h (strdup): Don't specify arguments in prototype.
+
+Sun Apr 26 07:57:21 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+	* rs6000-nat.c (vmap_ldinfo):  Issue warning instead of error if
+	fstat on ldinfo_fd fails.  Use objfile->obfd instead of vp->bfd
+	to check for reference to the same file.
+
+	* target.c (target_read_string):  Handle string transfers at the
+	end of a memory section gracefully.
+
+Fri Apr 24 17:18:56 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* Makefile.in: enable EXEEXT setting
+
+Fri Apr 24 11:53:49 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (add_local_symbols): change type of type from
+	char to int so that type shows up as 'A' or 'L' not 0.
+
+Thu Apr 23 16:37:20 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * README:  Minor changes for 4.17 release.
+
+Thu Apr 23 15:44:39 1998  Per Bothner  <bothner@cygnus.com>
+
+	* symfile.c (deduce_language_from_filename):  .class implies java.
+
+Thu Apr 23 12:52:21 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * configure.in (strerror): Check if function must be declared.
+        * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
+        * gdb_string.h (strerror): Function declaration issued if
+        NEED_DECLARATION_STRERROR.
+        * configure, config.in: Files regenerated.
+
+Thu Apr 23 12:27:43 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * symfile.c (simple_overlay_update_1): Do not prefix array address
+        by `&'.
+        * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
+        * tracepoint.c (encode_actions): Ditto.
+        * language.c, complaints.c, utils.c (varargs.h): Do not include that
+        file here, it is already included indirectly by defs.h.
+        * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
+        value to the appropriate pointer type.
+        * utils.c (floatformat_from_doublest): Ditto.
+        * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
+        (add_memrange): Likewise with xrealloc return value.
+        * stabsread.c (ref_add): Ditto.
+        * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
+        * elfread.c (elf_symfile_read): Ditto.
+        * os9kread.c (os9k_symfile_init): Ditto.
+
+Thu Apr 23 00:32:08 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* config.in: Rebuilt.
+	* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
+	HAVE_LC_MESSAGES): Define.
+
+Wed Apr 22 15:38:56 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* configure: Rebuilt.
+	* configure.in: Call CY_GNU_GETTEXT.
+	* Makefile.in (top_builddir): New macro.
+	(INTL): Define to @INTLLIBS@.
+	(INTL_DEPS): New macro.
+	(CDEPS): Reference INTL_DEPS, not INTL.
+
+Wed Apr 22 12:58:23 1998 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Handle missing shared libraries during the examination of a core
+	dump gracefully.
+	* solib.c (find_solib):  Use catch_errors around call to
+	solib_map_sections. Use warning instead of error if reading of
+	the shared library name fails.
+	(solib_map_sections):  Change return and argument types to make
+	it callable from catch_errors.
+	(symbol_add_stub):  Avoid GDB core dump if solib->abfd is NULL.
+	* irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
+	symbol_add_stub):  Ditto.
+
+Wed Apr 22 14:34:49 1998  Michael Meissner  <meissner@cygnus.com>
+
+	* Makefile.in (INTL*): Add support to link in the intl library,
+	and to add -I options to its source and object directories.
+	(INTERNAL_CFLAGS): Ditto.
+	(C{LIBS,DEPS}): Ditto.
+
+Tue Apr 21 11:20:54 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
+ 	with subtarget-specific `mach', rather than fixed default.
+	* config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
+	disassembly `mach'.
+
+Mon Apr 20 15:35:03 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * coffread.c (decode_base_type): Treat a long field with size greater
+        than TARGET_LONG_BIT as long long.
+        * values.c (value_from_longest): Print code value in error message.
+
+Mon Apr 20 15:32:21 1998   Mark Kettenis  <kettenis@phys.uva.nl>
+
+        * gdb/gdb_string.h (strdup): Declare only if not defined as a
+        macro.
+
+Mon Apr 20 14:18:45 1998  J. Kean Johnston  <jkj@sco.com>
+
+        * procfs.c: Added replacement macros for LWP stuff.  Fixed support 
+        for UnixWare / SVR4.2MP targets and any targets which use
+        multi-file /proc entries.  Fixed support for hardware watchpoints.
+        * solib.c: SCO needs some of the same code as SunOS. Change
+        preprocessor conditionals.
+
+        * config/i386/i386sco5.mt: New file.
+        * config/i386/tm-i386sco5.h: New file.
+        * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
+        * config/i386/nm-i386v42mp.h 
+        (TARGET_HAS_HARDWARE_WATCHPOINTS): define.  
+        Add other macros for hardware assisted watchpoints.
+        * config/i386/nm-i386sco5.h: Correct attributions.
+        (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
+        * config/i386/nm-linux.h (target_remote_watchpoint): Pass
+        'type' through to i386_insert_watchpoint.
+
+Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior): Don't add signalled processes
+	as new threads.
+	* procfs.c (wait_fd): Note if LWP has exited.
+	(procfs_wait): use GETPID to get process ID.
+
+Sat Apr 18 15:21:04 1998  Stan Cox  <scox@cygnus.com>
+
+	* configure.tgt: Added sparc86x support.
+
+Thu Apr 16 13:13:24 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
+	error string if in an ANSI C-ish environment.
+
+Wed Apr 15 18:59:48 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (SPARC_HAS_FPU): Define.
+	(sparc_extract_return_value): New function, required to handle
+	machines without floating point.
+	(sparc_store_return_value): Ditto.
+	* config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
+	sparc_extract_return_value instead of using inline code.
+	(sparc_extract_return_value): Declare.
+	(STORE_RETURN_VALUE): Call sparc_store_return_value instead
+	of using inline code.
+	(sparc_store_return_value): Declare.
+
+Wed Apr 15 12:19:42 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* solib.c (enable_break): Only call warning once
+	instead of three times.
+
+Tue Apr 14 16:52:59 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_extract_struct_value_address): Make it
+	work correctly on little-endian hosts.
+	(sparc_push_arguments): New function.
+	(gdb_print_insn_sparc): New function.
+	(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
+	disassembler, so that SPARClite-specific instructions will
+	be recognized.
+	* sparcl-tdep.c (readchar): Print debugging information.
+	(debug_serial_write): New function, a replacement for SERIAL_WRITE
+	that prints debugging information.
+	* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
+	(sparc_push_arguments): Declare.
+
+Tue Apr 14 15:43:49 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* gdbcfgxref (xref_menu): Call new regex and wild card searches
+	Now you can type in a specific triple like mips64-vr4300-elf or
+	somthing like mips*.h
+	(triple_search, wildcardsearch): The new functions
+
+Mon Apr 13 16:28:07 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* utils.c (warning): added call to warning_hook
+
+	* source.c (find_source_lines): modified to call warning in case
+	of source vs. executable time stamp mismatch. Simplified object
+	file check. Initialized mtime to 0.
+
+	* defs.h: added warning_hook prototype
+
+	* top.c: added warning_hook prototype.
+
+Mon Apr 13 09:54:08 1998  Keith Seitz  <keiths@andros.cygnus.com>
+
+	* config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
+	definition.
+
+Fri Apr 10 22:36:28 1998  Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+        Update support for x86 Solaris 2.
+        * config/i386/tm-i386sol2.h, nm-i386sol2.h:  New configuration
+        files for x86 Solaris 2.                                              
+        * config/i386/i386sol2.mt, i386sol2.mh:  Use them.                    
+        * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY):  New macro, extract  
+        carry flag from a given regset.                                     
+        (IS_STATIC_TRANSFORM_NAME):  New macro, check if a symbol name      
+        is a SunPro transformed name.                                 
+        * i386-tdep.c (sunpro_static_transform_name):  New function to
+        extract the source name from a SunPro transformed name.           
+        * inferior.h (procfs_first_available, procfs_get_pid_fd):        
+        Add prototypes.                                          
+        * infrun.c (wait_for_inferior):  Handle breakpoint hit in
+        signal handler without intervening stop in sigtramp.     
+        * procfs.c (procfs_lwp_creation_handler):  Use PROCFS_GET_CARRY
+        instead of direct access to the status register.               
+        (procfs_get_pid_fd):  New function, returns procfs fd for a given pid.
+        * sol-thread.c (ps_lgetLDT):  New function, returns LDT for a given   
+        lwpid.                                                                
+        (sol_find_new_threads):  Handle failed libthread_db initialization 
+        gracefully.                                                       
+        * stabsread.c (define_symbol):  Use IS_STATIC_TRANSFORM_NAME      
+        to check for a SunPro transformed symbol name.              
+
+Fri Apr 10 10:35:35 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* utils.c (fmthex): A formatting function for hexdumps
+
+	* mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
+ 	bit pattern interpretations. mips_fetch_instruction does not work
+ 	for 16 bit instructions. Some confusion remains about sign
+ 	extension in backward branches.
+	(mips32_relative_offset): Sign extension
+	(mips32_next_pc): Major debugging, bit pattern interpretation
+	(print_unpack): debugging printf
+	(fetch_mips_16): new funtion, key on PC low bit, not symbol table
+	(mips16_next_16): Initial major debugging of this function. Lots
+ 	of bit pattern mistakes.
+	(mips_next_pc): key on low bit of PC, not symbol table.
+	* symfile.c (generic_load): Added a download verification which
+ 	reads back the loaded code. Download chunk size is now a defined
+ 	macro. Fixed a bug in which downloading slips into loading one
+ 	byte at a time. Lower level functions in monitor.c can load long
+ 	sequences of bytes and make use of these fixups.  Referencing
+ 	bfd-start_address directly was incorrectly getting zero for start.
+
+Thu Apr  9 19:20:32 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
+	with dynamic size.
+
+Wed Apr  8 19:21:42 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* top.c (print_gdb_version): Print 1998 now.
+
+Wed Apr  8 16:57:22 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* source.c: Remove obsolete decl of strstr().
+
+Wed Apr  8 16:47:33 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
+	patch of March 23 1998.
+	* breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
+	patch of March 23 1998.
+
+Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): If this is an .mdebug 
+	section in an ELF file, override a symbol's ECOFF section with its 
+	ELF section.  Also, fix stabs continuation where a stabs string 
+	continues for more than one continuation.
+
+Mon Apr  6 09:17:48 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
+ 	using MAX_REGISTER_RAW_SIZE.
+
+Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* infrun.c: Fix prototype of signals_info to match static funtion.
+
+Thu Apr  2 12:47:41 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* sol-thread.c (sol_thread_store_registers): Save & restore new
+ 	value of single updated register to prevent accidental clobbering.
+
+Wed Apr  1 22:01:09 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/sparc/sparclite.mt: Link in the erc32 simulator.
+
+Wed Apr  1 16:30:49 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
+
+        * ns32k-tdep.c (flip_bytes, ns32k_localcount,
+        ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
+        deleted.
+
+        * ns32knbsd-nat.c: New (?) file to support fetching and storing
+        registers on NetBSD hosts.
+
+        * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
+        ns32k-nat.o
+
+        * ns32km3-nat.c (reg_offset): Get order of floating point
+        registers correct. Add extra 32382 register offsets.
+        (REG_ADDRESS): define to point at correct part of thread
+        state. Use calls to "warning" instead of "message".
+
+        * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
+        REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
+        fpu registers.
+
+Wed Apr  1 13:43:07 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * NEWS: m68k-motorola-sysv host support added.
+        * coffread.c (coff_start_symtab): Accept the filename as an argument,
+        set it here.  Callers updated.
+
+Wed Apr  1 23:13:23 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
+ 	FSR and FIR registers.
+	(REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
+	(REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
+
+	* config/mips/tm-mips64.h: Ditto.
+
+Tue Mar 31 21:30:39 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
+	vector to the info structure when disassembling thumb
+	instructions. 
+
+	* coffread.c (coff_symtab_read, read_one_sym,
+	process_coff_symbol):  Support Thumb symbol types. 
+
+	* dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
+	is defined) for function symbols.  
+
+Tue Mar 31 16:39:28 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): change warning to note.
+	(delete_trace_command): suppress y/n query if no tracepoints, or
+	if not from_tty.  (trace_pass_command): reject junk at end of args.
+	(read_actions): an action list consisting only of "end" is discarded.
+	(validate_actionline (for collect command)): an argument beginning
+	with a dollar_sign but not recognized as a special argument is
+	parsed like any other expression -- if it isn't a register name,
+	it's rejected.  Also reject an empty argument to while-stepping.
+	(trace_find_command): reject a negative frame number argument.
+	(_initialize_tracepoint): set $traceframe initially to -1.
+
+Mon Mar 30 16:42:12 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/Makefile.am, rdi-share/aclocal.m4,
+	rdi-share/configure: New files.
+	* rdi-share/configure.in:  Rewritten to be an autoconf input file.
+	* rdi-share/Makefile.in, rdi-share/configure: Generated by 
+	automake/autoconf.
+	* rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
+	to check environment.
+
+Sun Mar 29 15:17:16 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c (trace_start_command): Set trace_running_p.
+	(trace_stop_command): Clear trace_running_p.
+
+Sat Mar 28 15:19:48 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Update for 4.17 release.
+
+Fri Mar 27 10:15:50 1998  David Taylor  <taylor@tito.cygnus.com>
+
+	* tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
+	(encode_actions): Use the new gen_trace_for_expr function
+	instead of expr_to_address_and_size; collect registers when
+	using expressions.  (clear_collection_list): Fix memory leak.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.h (gen_trace_for_expr): Add prototype.
+
+Thu Mar 26 17:24:23 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): Fix memory leak.
+	(encode_actions): Fix memory leak.
+
+Thu Mar 26 16:16:55 1998  David Taylor  <taylor@tito.cygnus.com>
+
+	* tracepoint.c (trace_mention): New function.
+	(trace_command): Call it.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-general.c (ax_reqs): New function.
+	* ax.h (enum agent_flaws, struct agent_reqs): New types.
+	(agent_reqs): New extern prototype.  Well, actually, this was
+	there before, due to a premature checkin.
+ 	(struct aop_map): Add new `data_size' member.
+	* ax-general.c (aop_map): Supply its value.
+	* ax-gdb.c (agent_command): Call ax_reqs, for testing.
+
+	* ax-general.c (ax_print): If we encounter an invalid or
+	incomplete opcode, don't abort; just print an error message.
+
+	* ax-gdb.c: Generate trace bytecodes, as appropriate.
+	(trace_kludge): New variable.
+	(gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
+ 	nicely.
+	(expr_to_agent): Ask for no trace bytecodes.
+	(gen_trace_for_expr): New function.
+	(agent_command): Call it, and display the result appropriately ---
+	no struct axs_value, so no type or kind information.
+
+	* ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
+
+Thu Mar 26 22:29:28 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+        * tracepoint.c (trace_status_command): Recognize a boolean return
+        value from the stub to indicate whether trace experiment is
+        running.  Export this value as a global state variable.
+        (trace_running_p) for use by the GUI. (from Michael Snyder)
+        (trace_pass_command) added call to modify_tracepoint_hook.
+
+        * tracepoint.h export trace_running_p.
+
+Thu Mar 26 13:08:01 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): do not error out if
+	exp->elts[0].opcode is not on short line -- let
+	expr_to_address_and_size handle it.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* tracepoint.c: Include "ax.h", not "agentexpr.h".
+
+	* tracepoint.c (encode_actions): Call expr_to_address_and_size,
+	not simply expr_to_agent.
+
+	* ax-general.c: Comment out code in progress, so everyone else can
+	at least compile.
+
+	* gdbtypes.c: Doc fix.
+
+	* ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
+	* Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
+	(SFILES): Add ax-general.c, ax-gdb.c.
+	(ax_h): New variable.
+	(ax-general.o, ax-gdb.o): New rules.
+
+
+Tue Mar 24 16:22:40 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
+
+	* Makefile.in:  Derive SHELL from configure.
+	* config/d10v/d10v.mt config/m32r/m32r.mt
+	config/mn10200/mn10200.mt config/mn10300/mn10300.mt
+	config/d30v/d30v.mt:  Remove -lm from SIM.  This prevents
+	dependency checking of -lm (under NT native builds).  (It is
+	automatically added by configure if it exists.)
+	* doc/configure mswin/configure nlm/configure
+	testsuite/gdb.base/configure testsuite/gdb.c++/configure
+	testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
+	testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
+	Regenerate with autoconf 2.12.1 to fix shell issues for NT native
+	builds.
+
+Mon Mar 23 18:10:57 1998  Ulrich Drepper  (drepper@cygnus.com)
+
+	* solib.c (solib_create_inferior_hook):  Rewrite previous
+	change to check the type of file via BFD.
+
+Mon Mar 23 13:52:28 1998  Ulrich Drepper  (drepper@cygnus.com) 
+ 
+	* breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
+	like bp_breakpoints.
+	* solib.c (solib_create_inferior_hook): Relocate section addresses
+	if the alleged start address doesn't agree with the PC.
+
+Sat Mar 21 19:34:49 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	merged changes from Foundry (list follows by file/author):
+
+        - Tom Tromey  <tromey@cygnus.com>
+        * Makefile.in (gdbres.o): New target.
+        (WINDRES): New define.
+        * configure: Rebuilt.
+        * configure.in (WINDRES): Define.
+        (CONFIG_OBS): Include gdbres.o on Windows.
+        * gdbtool.ico: New file.
+        * gdb.rc: New file.
+
+        * ser-unix.c
+        - Keith Seitz  <keiths@onions.cygnus.com>
+        (wait_for): Don't reset the timeout_remaining for CYGWIN32,
+        since we now effectively poll the serial port.
+        Don't reset the current_timeout, either, since this member is used
+        by hardwire_readchar to track the timeout and call the ui_loop_hook.
+	(hardwire_readchar): Poll the serial port for Cygwin32. We timeout
+ 	every second, update the UI, and loop around doing this until we
+ 	have hit the real timeout or we get data or an error. This will
+ 	allow the UI to stay active while gdb is "blocked" talking to the
+ 	target.
+       	- Martin M. Hunt  <hunt@cygnus.com>
+	(wait_for): Do reset current_timeout because it is only used to
+ 	keep track of what the current timeout for the scb is.
+
+        * top.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (quit_confirm): Change exit message again
+        for GUI.
+        (pc_changed_hook): Add prototype.
+        - Tom Tromey  <tromey@cygnus.com>
+        (quit_confirm): Added missing `else'.
+        (quit_confirm): Special-case message if init_ui_hook is
+        set.
+
+        * symtab.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (find_pc_sect_line): If no symbol information
+        is found, return correct pc anyway.
+        (find_methods): Comment out an apparently
+        bogus error message because it messes up Foundry.
+
+        * serial.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (_initialize_serial): Add a description of
+        "set remotelogbase".
+
+        * findvar.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (write_register_gen): Add call to
+        pc_changed_hook if the PC is being changed.
+
+        * defs.h
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (pc_changed_hook): Define.
+
+        * command.c
+        -  Martin M. Hunt  <hunt@cygnus.com>
+        (do_setshow_command): If no arguments are supplied,
+        don't dump core, instead print out an error message.
+
+        * breakpoint.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        Make set_raw_breakpoint, set_breakpoint_count,
+        and breakpoint_count non-static so they are accessible from
+        elsewhere.
+        (enable_breakpoint): Enable breakpoint
+        with same disposition instead of changing all breakpoints
+        to donttouch.
+
+        * annotate.h
+	- Keith Seitz  <keiths@onions.cygnus.com>
+        Add declarations for annotation hooks.
+ 
+        * annotate.c
+	- Keith Seitz  <keiths@onions.cygnus.com>
+        Add hooks: annotate_starting_hook, annotate_stopped_hook,
+        annotate_signalled_hook, annotate_exited_hook.
+        (annotate_starting): If hook exists, call it instead.
+        (annotate_stopped): If hook exists, call it instead.
+        (annotate_exited): If hook exists, call it instead.
+        (annotate_signalled): If hook exists, call it instead.
+
+Fri Mar 20 14:45:36 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdbserver/Makefile.in: add dependency on XM_CLIBS.
+	* gdbserver/low-sim.c (registers) force into alignment.
+	(create_inferior): Fix typo on new_argv; add abfd arg to 
+	sim_open, sim_create_inferior.  Add reg_size arg to 
+	sim_fetch_register, sim_store_register.  Make simulator
+	take a single-step to get into a known running state.
+	* gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
+	* gdbserver/server.c: Add remote_debug variable to control 
+	debug output.
+	* gdbserver/server.h: Add prototypes for enable/disable_async_io.
+	* gdbserver/remote-utils.c: add verbose debugging output controlled 
+	by "remote_debug" variable.  Add call to "disable_async_io()"
+	to avoid being killed by async SIGIO signals.
+	* config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
+	so that gdbserver can be built with the m32r simulator.
+
+Fri Mar 20 09:04:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
+ 	types.
+
+	* gdbtypes.c (_initialize_gdbtypes): Initialize new types.
+
+	* mips-tdep.c (do_gp_register_row): Pad register value when GP
+ 	register is smaller than MIPS_REGSIZE.
+
+	* findvar.c (value_of_register): When raw and virtual register
+ 	values identical, check that sizes are consistent.
+
+Thu Mar 19 11:32:15 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* minsyms.c (compare_minimal_symbols): If addresses are identical,
+	then compare on names.  Sorted list should have symbols with 
+	identical addresses AND names adjacent, so dups can be discarded.
+
+Wed Mar 18 12:50:17 1998  Jeff Law  (law@cygnus.com)
+
+	* stabsread.c (define_symbol): Don't look for ',' as a LRS
+	indicator.
+
+Wed Mar 18 10:34:51 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
+
+Fri Mar 13 15:43:53 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * config/mips/xm-mips.h (CC_HAS_LONG_LONG):  Undefine for Ultrix
+        when compiling with native cc, the compiler has broken long long
+        support.
+
+Fri Mar 13 15:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * config/m68k/xm-sun3os4.h:  Remove malloc declarations, they
+        are handled via autoconf now.
+        * remote.c (remote_ops, extended_remote_ops):  Replace static
+        forward declaration by moving the static definition to the top of
+        the file, for old K&R compilers.
+        * tracepoint.c (collect_symbol, trace_start_command):
+        Replace ANSI string concatenation with K&R compatible simple string.
+
+1998-03-11  Fred Fish  <fnf@ninemoons.com>
+
+	* source.c (select_source_symtab): Don't reach error if we have
+	a current_source_symtab from reading in partial symbol table.
+
+Fri Mar  6 13:10:27 1998  Fred Fish  <fnf@cygnus.com>
+
+	* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
+ 	SERIAL_FLUSH_OUTPUT.
+	* serial.h (struct serial_ops): Add drain_output, pointer to
+ 	function that waits for output to drain.
+	(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
+	* ser-unix.c (hardwire_drain_output): New function and prototype.
+
+	* ser-unix.c (hardwire_ops): Add entry for drain_output function.
+	* ser-tcp.c (tcp_ops): Ditto.
+	* ser-ocd.c (ocd_ops): Ditto.
+	* ser-mac.c (mac_ops): Ditto.
+	* ser-go32.c (dos_ops): Ditto.
+	* ser-e7kpc.c (e7000pc_ops): Ditto.
+
+Thu Mar  5 16:07:41 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* sparcl-tdep.c: fix #endif comments
+
+Thu Mar  5 15:10:35 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
+
+Thu Mar  5 14:42:41 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
+	error () so that we abort out of bdm_ppc_open.
+
+Wed Mar  4 16:53:52 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* serial.c (_initialize_serial): Add a description of 
+	"set remotelogbase".
+
+	* command.c (do_setshow_command): If no arguments are supplied,
+	don't dump core, instead print out an error message.
+
+Wed Mar  4 01:39:08 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
+	MAKE_MSYMBOL_SPECIAL
+	* config/mips/tm-mips.h: ditto
+
+Tue Mar  3 17:19:08 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
+	TARGET_PTR_BIT rather from sizeof(char *) on host.
+
+Tue Mar  3 14:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * alpha-nat.c (fetch_osf_core_registers):  Renamed from
+        fetch_aout_core_registers.
+        (alpha_osf_core_fns):  Renamed from alpha_aout_core_fns, change
+        flavour to bfd_target_unknown_flavour for OSF core files.
+
+Mon Mar  2 17:44:13 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* breakpoint.c (_initialize_breakpoint): Make "en" an alias
+	for "enable" (so that it doesn't conflict with "end").
+
+Mon Mar  2 17:04:25 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile (VERSION): Bump to 4.17.1.
+
+Mon Mar  2 16:59:15 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
+
+Mon Mar  2 16:51:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
+
+Mon Mar  2 16:47:11 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * Makefile.in (distclean): Add `rm $(YYFILES)'.
+
+Mon Mar  2 16:45:48 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
+	is unsigned.
+
+Sun Mar  2 15:16:13 1998 Richard Henderson  <rth@cygnus.com>         
+
+        * configure.host, configure.tgt: Add sparc-linux.               
+        * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
+        * config/sparc/*linux*: New files.                         
+
+Mon Mar  2 12:12:41 1998  Anthony Thompson   (athompso@cambridge.arm.com)
+
+	* arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
+	if we're big endian; else call print_insn_little_arm.
+
+Mon Feb 24 11:24:57 1998  Richard Henderson  <rth@cygnus.com>
+
+        * Makefile.in (BISON): Don't even pretend to use yacc.
+        (c-exp.tab.o): Use bison -o to use a unique intermediate file.
+        (f-exp.tab.o, m2-exp.tab.o): Likewise.
+        (jv-exp.tab.o): Likewise.
+
+Tue Feb 24 03:32:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_fetch_register): Don't abort when the
+ 	register size is wrong.
+
+Thu Feb 19 16:49:48 1998 John Metzler  <jmetzler@cygnus.com>
+
+	* target.c (debug_to_fetch_registers,debug_to_store_registers,
+	debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
+	64 bit targets crashed long long printfs.
+
+Tue Feb 17 16:36:22 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* symfile.c (read_target_int_array): rename read_target_long_array
+        and force the sizeof an ovly_table element to sizeof(long),
+        instead of sizeof(int).
+
+Tue Feb 17 18:05:05 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* remote-mips.c (mips_request): Use unsigned long during parsing
+ 	returned value from monitor, to prevent accidental sign extension.
+
+Tue Feb 17 14:28:33 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+        * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
+        * configure.in: Ditto.
+        * configure: Regenerated.
+
+Tue Feb 17 14:07:34 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+        * gdbtypes.c (check_typedef): Do not try to resolve the length of      
+        a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
+        set TYPE_FLAG_TARGET_STUB as well.
+
+Tue Feb 17 14:32:18 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
+ 	Pass register size to sim_{fetch,store}_register.  Check nr of
+ 	register bytes transfered is correct.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-d10v.c (remote_d10v_open): Call push_remote_target
+ 	instead of open_remote_target.
+
+	* remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
+ 	to translate addr/size when defined.
+	(open_remote_target): Delete.
+
+	* target.h (open_remote_target): Delete.
+
+	* config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (d10v_extract_return_value): Wierd.  GCC wants to
+ 	return odd sized register quantities with only half of the first
+ 	register used!
+
+	* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
+ 	size > 8.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
+ 	sizeof type > 1.
+
+Sun Feb 15 16:10:50 1998  Ron Unrau   <runrau@cygnus.com>
+
+	* parse.c (write_dollar_variable): call new function 
+	  target_map_name_to_register to allow targets to define their own 
+	  register name aliases.
+	* infcmd.c (registers_info): use target_map_name_to_register so that
+	  "print $reg" and "info reg $reg" use the same register name aliases.
+
+Fri Feb 13 16:40:30 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
+	* config/i386/xm-i386mk.h: Fix an include.
+	* config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
+
+Thu Feb 12 16:12:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* remote-mips.c (mips_enter_debug): Sleep before sending CR to
+ 	monitor.
+	(mips_exit_debug): Accept any whitespace / verbiage before monitor
+ 	prompt reappears.
+
+Thu Feb 12 18:25:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
+ 	accumulators.
+
+Thu Feb 12 17:10:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* valops.c (value_at): For d10v, make read pointers with
+ 	read_target_unsigned_integer, keep addresses unsigned.
+	(value_fetch_lazy): Ditto.
+
+Thu Feb 12 12:14:02 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-d10v.c: New file.  Layer the d10v GDB->remote memory map
+ 	on top of the remote serial memory transfer functions.
+
+	* config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
+
+	* Makefile.in (remote-d10v.o): Add dependencies.
+
+	* remote.c (remote_open_1): Add arg extended_p, engage extended
+ 	protocol when extended_p.
+	(remote_open, extended_remote_open): Pass !extended_p /
+ 	extended_p to remote_open_1.
+
+	* remote.c (open_remote_target), target.h: New function.
+
+Wed Feb 11 08:41:15 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
+
+Tue Feb 10 17:50:37 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
+	if it exists.
+	Remove static declaration of free_actions.
+
+	* tracepoint.h: Add declaration of free_actions.
+		
+Tue Feb 10 12:17:13 1998  Fred Fish  <fnf@cygnus.com>
+
+	* symtab.c (decode_line_1): Revert change that mistakenly
+	removed assignment of sals[0].pc field.
+
+Mon Feb 10 12:37:47 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
+        `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
+        `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
+        (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
+        is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
+        (FRAME_NUM_ARGS): New macro.
+        * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
+        * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
+        patch.
+
+Mon Feb  9 11:10:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
+ 	D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
+
+	* config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
+	(DMEM_START): Move to 0x00......
+	(STACK_START): Move to 0x00..7ffe.
+	(D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
+
+	* d10v-tdep.c (d10v_xlate_addr): Delete function.
+
+Mon Feb  9 15:10:21 1998  Fred Fish  <fnf@cygnus.com>
+
+	* symtab.c (fixup_psymbol_section): Move forward declaration to
+	top of file with other such decls.  Make it a static function.
+	* symtab.h: Minor formatting tweaks.
+
+Mon Feb  9 13:14:12 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
+ 	Remove redefinition.
+	* config/i960/tm-i960.h (BREAKPOINT): Define.
+
+Mon Feb  9 15:35:38 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (init.c): Ignore errors when making init.c.  Seems
+	necessary to work around bug in Solaris make.
+
+Sun Feb  6 02:44:28 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
+        (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
+        (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
+        because floating-point values return via %fp0.
+        (CLEAR_INSN_CACHE): New macro.
+        * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
+        to use DOUBLEST.
+        (REGISTER_CONVERT_TO_RAW): Ditto.
+        * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
+        call it after having written in child process's memory.
+        * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
+        (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
+
+Fri Feb  6 16:17:30 1998  Jeffrey A Law  (law@cygnus.com)
+
+        * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
+        override.
+        (TARGET_LONG_LONG_BIT): Likewise.
+        (TARGET_PTR_BIT): Likewise.
+
+Fri Feb  6 17:42:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
+ 	D10V_CONVERT_DADDR_TO_RAW): Define.
+
+	* d10v-tdep.c (d10v_push_arguments): Re-write.  Pass arguments in
+ 	registers, regardless of their size, when they fit.
+
+Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (d10v_extract_return_value): For function pointers
+	translate address to IMAP area.
+
+	* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
+ 	struct.
+	(POP_FRAME): Point at generic_pop_current_frame.
+
+	* d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
+ 	handled earlier.
+	(d10v_push_return_address): New function.
+	(d10v_pop_dummy_frame): Delete.
+	(d10v_fix_call_dummy): Delete.
+	(d10v_call_dummy_address): Delete.
+
+	* d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
+ 	frameless.
+
+	* d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
+
+	* config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
+ 	address of structure from first ARG1_REGNUM.
+
+	* d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
+ 	even-odd register pair.  Store 1 and 2 byte args in registers.
+
+	* valops.c (value_fetch_lazy): Ensure that a D10V function pointer
+ 	is fetched in the correct byte order.
+	(value_at): Ditto. Also ensure data pointers are mapped to data
+ 	segment.
+
+	* config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P): 
+
+	* d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
+	(d10v_pop_frame): Replace R13 with LR_REGNUM.
+	(d10v_push_arguments): Replace R2 with ARG1_REGNUM.
+	(d10v_push_arguments): Replace 6 with ARGN_REGNUM.
+	(d10v_extract_return_value): Access return value with RET1_REGNUM.
+
+	* config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
+ 	Define.
+	(STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
+	(STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
+ 	location.
+
+Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* blockframe.c (generic_pop_dummy_frame): Flush the frame, no
+ 	longer valid.
+
+	* blockframe.c (generic_pop_current_frame), frames.h: New
+ 	function.
+
+Thu Feb  5 17:18:16 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_create_inferior): clear_proceed_status
+ 	before /re/starting the simulator.
+
+Thu Feb  5 15:55:31 1998  C. M. Heard (heard@vvnet.com)
+
+        * top.c (do_nothing): Remove signal handler after signal is caught.
+
+Thu Feb  5 11:57:06 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (tracepoint_operation): call free_actions instead
+	of free.  (free_actions): eliminate some memory leaks for actions.
+	(validate_actionline): pass string arg by reference, so we can 
+	change the pointer.  Change all memrange collection arguments to
+	canonical form (literal address and size), to enforce early
+	evaluation.  Accept UNOP_MEMVAL (assembly variables) for 
+	trace collection.  (parse_and_eval_memrange): accept expressions
+	for the address and size fields of a memrange (and evaluate
+	them immediately).  (several places): use -1 instead of zero
+	to distinguish an absolute memrange from a register-relative one.
+	(encode_actions): add handling for UNOP_MEMVAL (assembly variable).
+
+Wed Feb  4 17:40:21 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * Makefile.in (SFILES): add tracepoint.c.
+        (LINTFILES): add @CONFIG_SRCS@.
+        (SOURCES): Ditto.
+        * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
+        * configure: Regenerated.
+
+Tue Feb  3 16:12:32 1998  Gordon W. Ross (gwr@mc.com)
+
+	* infptrace.c (child_resume): Don't try to step if 
+	NO_SINGLE_STEP is defined.
+
+Mon Feb  2 19:06:13 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (VERSION): Bump to 4.16.2.
+
+Mon Feb  2 17:18:25 1998  Richard Henderson  <rth@cygnus.com>
+
+        * alpha-nat.c (fetch_aout_core_registers): Rename from
+        fetch_core_registers.
+        (fetch_elf_core_registers): New function.
+        (supply_gregset): Use ALPHA_REGSET_BASE.
+        (supply_fpregset): Likewise.
+        (fill_fpregset): Likewise.
+        (alpha_aout_core_fns): Rename from alpha_core_fns.
+        (alpha_elf_core_fns): New.
+        * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
+        Disable MMALLOC.
+        * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
+	(TARGET_ELF64): Likewise.
+        (ALPHA_REGSET_BASE): New.
+        * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
+        * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
+
+        * solib.c (elf_locate_base): Add TARGET_ELF64 support.
+        (info_sharedlibary_command): Likewise.
+
+        * configure.host: Match alpha*.
+        * configure.tgt: Likewise.
+
+Fri Jan 30 15:11:38 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
+ 	whether we are in the dynamic symbol resolution code 
+	(wait_for_inferior): invoke it.
+	* solib.c (in_svr4_dynsym_resolve_code): new function
+	(enable_break): record start and end of the dynamic linker
+	text and plt sections for use in in_svr4_dynsym_resolve_code.
+	* solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
+	(in_svr4_dynsym_resolve_code): declare it.
+	* config/nm-gnu.h (solib.h): move inclusion to after definition
+	of SVR4_SHARED_LIBS.
+	* config/nm-sysv4.h (solib.h): ditto.
+	* config/i386/nm-i386sco5.h (solib.h): ditto.
+	* config/i386/nm-linux.h (solib.h): ditto.
+	* config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
+
+Thu Jan 29 19:39:31 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
+	never be defined.
+	* dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
+	Remove, no longer needed.
+	* hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
+	* config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
+	* config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
+	* config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
+
+Wed Jan 28 14:46:52 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Suggested by Chris Walter <walter@budoe.bu.edu>:
+	* dwarfread.c (set_cu_language): Recognize Fortran.
+	* dwarf2read.c (set_cu_language): Ditto.
+	(read_array_type): Fix language test.
+
+Wed Jan 28 12:51:08 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+ 
+        * blockframe.c (generic_frame_chain_valid): A frame pointer may
+        be valid if it is equal to the frame pointer of its caller (ie.
+        not necessarily strictly INNER_THAN).  Allows frameless functions.
+ 
+Wed Jan 28 11:23:25 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.c (monitor_vsprintf): New function to handle
+	printing of large addresses using %A format specifier.
+	(monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
+	instead of vsprintf.
+	* dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
+	to print addresses.
+
+Tue Jan 27 16:14:23 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
+	when using GNU ld.
+
+Mon Jan 26 19:07:46 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
+	Add closing parenthesis.  From HJ Lu.
+
+Mon Jan 26 17:54:45 1998  Mark Alexander  <marka@cygnus.com>
+
+	* dve3900-rom.c: Improve performance by using memory commands
+	that print less fluff.  Minor cosmetic changes.
+	Eliminate compiler warnings.
+
+Sat Jan 24 23:44:43 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* breakpoint.c (enable_breakpoint): Preserve breakpoint
+	disposition when enabling a breakpoint.
+
+	* symtab.c (find_pc_sect_line): If no symbol information
+	is found, return correct pc anyway.
+
+Fri Jan 23 17:26:22 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
+	ns32k-*-mach3*): Fix file names.
+	(i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
+	recognition, no source files for these.
+	* configure.tgt (powerpc-*-aix4*): Remove config, now identical
+	to powerpc-*-aix*.
+	* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
+	no longer needed.
+
+Fri Jan 23 16:49:41 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.c (monitor_write, monitor_readchar): New functions.
+	* monitor.h (monitor_write, monitor_readchar): Declare.
+	* dve3900-rom.c: Add support for fast loading on ethernet connections.
+
+Fri Jan 23 07:47:06 1998  Fred Fish  <fnf@cygnus.com>
+
+	* config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
+	(TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
+	(TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
+	(d10v_write_fp, d10v_read_fp): Add prototypes.
+	* symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
+	* symfile.c (simple_overlay_update, simple_overlay_update_1):
+	Ignore the size of overlay sections.  This check is redundant anyway.
+	* printcmd.c (print_frame_args): Ditto.
+	* valops.c (value_fetch_lazy): Ditto.
+	* values.c (unpack_long): Ditto.
+	* d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
+	d10v_init_extra_frame_info): Fix some minor bugs so the finish command
+ 	works properly.
+	(show_regs): Change num1 and num2 types from "long long" to "LONGEST".
+	(d10v_read_fp, d10v_write_fp): New functions.
+	(d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
+	(d10v_push_arguments): Fix for pointers and structs.
+	(d10v_extract_return_value): Fix for pointers and chars.
+
+Tue Jan 20 18:53:18 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
+	recognition, no source files for these (note that the i386 Mach
+	config is for pre-Mach 3).
+	(mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
+	* config/mips/mipsel64.mt: Remove, never referenced.
+
+Mon Jan 19 14:01:28 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (print_gdb_version): Restore to original message.
+
+Mon Jan 19 13:34:40 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	From cgf@bbc.com (Chris Faylor):
+	* win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
+	let the child exit.
+	(child_kill_inferior): Respond to all debug events as the child is
+	terminating.
+
+	* Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
+	(uninstall): Add $(EXEEXT) to file name to remove.
+	(gdb$(EXEEXT)): Rename target from plain gdb.
+	(gdb1$(EXEEXT)): Rename target from plain gdb1.
+	(clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
+
+1998-01-16  Felix Lee  <flee@cygnus.com>
+
+	* top.c (print_gdb_version): delete stutter.
+
+Thu Jan 15 12:29:13 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
+	to prevent spurous error messages on non-ICE targets.
+
+Wed Jan 14 19:27:02 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
+	Remove, no longer used.
+
+Wed Jan 14 18:11:26 1998  Michael Meissner  <meissner@cygnus.com>
+
+	Patch from Jim Wilson.
+	* d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
+	declare void function before use.
+
+	* config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
+
+Tue Jan 13 16:38:48 1998  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (--with-mmalloc): Add new configure arg to use the
+	mmalloc package.  Default is to not use it.
+	(START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
+	the string "2".
+	* acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
+	* configure: Regenerated.
+	* config.in: Regenerated.
+	* Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
+	(MMALLOC): Set using configure.
+	(MMALLOC_CFLAGS): Set using configure.
+
+	* config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
+	than just defining it.
+	* mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
+	* utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
+	* objfiles.c: ditto.
+	* defs.h: ditto.
+
+	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
+	* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
+	* config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
+	* gdbserver/Makefile.in (MMALLOC_*): Remove.
+	* config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
+	* config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+
+Mon Jan 12 11:46:51 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
+	default to void pointer type (so that their default radix is hex).
+
+	* symtab.c: move rbreak_command from no_class to class_breakpoint
+	so it will be listed under "help breakpoints".
+
+Sat Jan 10 14:58:04 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* rdi-share/hostchan.c: Remove gettimeofday declaration.
+
+Thu Jan  8 11:03:59 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
+ 	to implement the Angel remote debugging interface.
+
+	* Makefile.in: Add build rules for remote-rdi.c and
+	rdi-share/libangsd.a.
+
+	* configure.tgt: Updated from source on branch.
+	* config/arm/tm-arm.h: Updated from source on branch.
+	* arm-tdep.c: Updated from source on branch.
+
+	* rdi-share: New directory, RDI library contributed by ARM.
+
+Mon Jan  5 20:21:59 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
+	* monitor.c (monitor_wait): Echo program output.
+	* dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
+	add MO_PRINT_PROGRAM_OUTPUT flag.
+
+Mon Jan  5 18:21:11 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
+	SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
+	defined.
+	* top.c (return_to_top_level, catch_errors): use the new macros
+	* main.c (SET_TOP_LEVEL): ditto.
+	* config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
+
+Fri Jan  2 18:48:58 1998  Mark Alexander  <marka@cygnus.com>
+
+	* configure.in: Double up brackets in shell case pattern.
+
+Fri Jan  2 17:06:05 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+        * tracepoint.c (finish_tfind_command): improved algorithm for
+        deciding when we've "stepped" into a new stack frame.
+        (map_args_over_tracepoints): loop over tracepoint list "safely", 
+	since list elements may be deleted during loop.
+	(read_actions): add actions to history list.
+
+For older changes see ChangeLog-97
+
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
new file mode 100644
index 0000000..2c6dfb5
--- /dev/null
+++ b/gdb/Makefile.in
@@ -0,0 +1,1619 @@
+# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
+# Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+libdir = @libdir@
+tooldir = $(libdir)/$(target_alias)
+
+datadir = @datadir@
+mandir = @mandir@
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = @infodir@
+includedir = @includedir@
+
+# This can be referenced by `INTLDEPS' as computed by CY_GNU_GETTEXT.
+top_builddir = .
+
+SHELL = @SHELL@
+EXEEXT = @EXEEXT@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+AR = @AR@
+AR_FLAGS = qv
+RANLIB = @RANLIB@
+DLLTOOL = @DLLTOOL@
+WINDRES = @WINDRES@
+
+# If the user configured GDB to include the TUI, the name of the tui
+# library goes here.
+TUI_LIBRARY = @TUI_LIBRARY@
+
+# If the user configured GDB to include the TUI, the all-tui 
+# target goes here.
+BUILD_TUI = @BUILD_TUI@
+
+# Flags that describe where you can find the termcap library.
+# This can be overridden in the host Makefile fragment file.
+TERMCAP = @TERM_LIB@
+
+# If you are compiling with GCC, make sure that either 1) You have the
+# fixed include files where GCC can reach them, or 2) You use the
+# -traditional flag.  Otherwise the ioctl calls in inflow.c
+# will be incorrectly compiled.  The "fixincludes" script in the gcc
+# distribution will fix your include files up.
+CC=@CC@
+
+# Directory containing source files.
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+YACC=@YACC@
+
+YLWRAP = $(srcdir)/../ylwrap
+
+# where to find makeinfo, preferably one designed for texinfo-2
+MAKEINFO=makeinfo
+
+# Set this up with gcc if you have gnu ld and the loader will print out
+# line numbers for undefined references.
+#CC_LD=gcc -static
+CC_LD=$(CC)
+
+# Where is our "include" directory?  Typically $(srcdir)/../include.
+# This is essentially the header file directory for the library
+# routines in libiberty.
+INCLUDE_DIR =  $(srcdir)/../include
+INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
+
+# Where is the "-liberty" library?  Typically in ../libiberty.
+LIBIBERTY = ../libiberty/libiberty.a
+
+# Configured by the --with-mmalloc option to configure.
+MMALLOC = @MMALLOC@
+MMALLOC_CFLAGS = @MMALLOC_CFLAGS@
+
+# Where is the BFD library?  Typically in ../bfd.
+BFD_DIR = ../bfd
+BFD = $(BFD_DIR)/libbfd.a
+BFD_SRC = $(srcdir)/$(BFD_DIR)
+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
+
+# Where is the READLINE library?  Typically in ../readline.
+READLINE_DIR = ../readline
+READLINE = $(READLINE_DIR)/libreadline.a
+READLINE_SRC = $(srcdir)/$(READLINE_DIR)
+READLINE_CFLAGS = -I$(READLINE_SRC)/..
+
+WARN_CFLAGS = @WARN_CFLAGS@
+
+# Where is the INTL library?  Typically in ../intl.
+INTL_DIR = ../intl
+INTL = @INTLLIBS@
+INTL_DEPS = @INTLDEPS@
+INTL_SRC = $(srcdir)/$(INTL_DIR)
+INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+
+# Where is the TUI library?  Typically in tui/.
+TUI_DIR=tui
+TUI_SRC = $(srcdir)/$(TUI_DIR)
+TUI_CFLAGS= -I$(TUI_SRC)
+
+# Opcodes currently live in one of two places.  Either they are in the
+# opcode library, typically ../opcodes, or they are in a header file
+# in INCLUDE_DIR.
+# Where is the "-lopcodes" library, with (some of) the opcode tables and
+# disassemblers?
+OPCODES = ../opcodes/libopcodes.a
+# Where are the other opcode tables which only have header file
+# versions?
+OP_INCLUDE = $(INCLUDE_DIR)/opcode
+OPCODES_CFLAGS = -I$(OP_INCLUDE)
+
+# The simulator is usually nonexistent; targets that include one
+# should set this to list all the .o or .a files to be linked in.
+SIM =
+
+
+ENABLE_CFLAGS= @ENABLE_CFLAGS@
+
+# -I. for config files.
+# -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
+# -I$(srcdir)/config for more generic config files.
+
+# It is also possible that you will need to add -I/usr/include/sys if
+# your system doesn't have fcntl.h in /usr/include (which is where it
+# should be according to Posix).
+DEFS = @DEFS@
+GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config $(DEFS)
+
+# M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
+# from the config directory.
+GLOBAL_CFLAGS = $(MT_CFLAGS) $(MH_CFLAGS)
+#PROFILE_CFLAGS = -pg
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+
+# Need to pass this to testsuite for "make check".  Probably should be
+# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
+# so "make check" has the same result no matter where it is run.
+CXXFLAGS = -g -O
+
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
+	$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
+	$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) \
+	$(INTL_CFLAGS) $(TUI_CFLAGS) $(ENABLE_CFLAGS) $(WARN_CFLAGS)
+
+# LDFLAGS is specifically reserved for setting from the command line
+# when running make.
+
+# Profiling options need to go here to work.
+# I think it's perfectly reasonable for a user to set -pg in CFLAGS
+# and have it work; that's why CFLAGS is here.
+INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) @CONFIG_LDFLAGS@ @HLDFLAGS@
+HLDENV = @HLDENV@
+
+# We are using our own version of REGEX now to be consistent across
+# machines.
+REGEX = gnu-regex.o
+REGEX1 = gnu-regex.o
+
+# If your system is missing alloca(), or, more likely, it's there but
+# it doesn't work, then refer to libiberty.
+
+# Libraries and corresponding dependencies for compiling gdb.
+# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
+# TERMCAP comes after readline, since readline depends on it.
+# MMALLOC comes after anything else that might want an allocation function.
+# LIBIBERTY appears twice on purpose.
+# If you have the Cygnus libraries installed,
+# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
+INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
+	$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+	-lmmalloc -lintl -liberty
+CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(INTL) $(LIBIBERTY) \
+	$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
+	$(MMALLOC) $(LIBIBERTY) $(WIN32LIBS)
+CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
+	$(OPCODES) $(MMALLOC) $(INTL_DEPS) $(LIBIBERTY) @CONFIG_DEPS@
+
+ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
+ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
+
+VERSION=4.18
+DIST=gdb
+
+LINT=/usr/5bin/lint
+LINTFLAGS= $(BFD_CFLAGS)
+
+RUNTEST = `if [ -f $${rootsrc}/../dejagnu/runtest ] ; then \
+		echo $${rootsrc}/../dejagnu/runtest ; else echo runtest; \
+	   fi`
+
+RUNTESTFLAGS=
+
+# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
+# interface to the serial port.  Hopefully if get ported to OS/2, VMS,
+# etc., then there will be (as part of the C library or perhaps as
+# part of libiberty) a POSIX interface.  But at least for now the
+# host-dependent makefile fragment might need to use something else
+# besides ser-unix.o
+SER_HARDWIRE = ser-unix.o
+
+# The `remote' debugging target is supported for most architectures,
+# but not all (e.g. 960)
+REMOTE_OBS = remote.o dcache.o remote-utils.o tracepoint.o ax-general.o ax-gdb.o
+
+# This is remote-sim.o if a simulator is to be linked in.
+SIM_OBS =
+
+ANNOTATE_OBS = annotate.o
+
+# Host and target-dependent makefile fragments come in here.
+@host_makefile_frag@
+@target_makefile_frag@
+# End of host and target-dependent makefile fragments
+
+FLAGS_TO_PASS = \
+	"prefix=$(prefix)" \
+	"exec_prefix=$(exec_prefix)" \
+	"against=$(against)" \
+	"AR=$(AR)" \
+	"AR_FLAGS=$(AR_FLAGS)" \
+	"CC=$(CC)" \
+	"CFLAGS=$(CFLAGS)" \
+	"CHILLFLAGS=$(CHILLFLAGS)" \
+	"CHILL=$(CHILL)" \
+	"CHILL_LIB=$(CHILL_LIB)" \
+	"CXX=$(CXX)" \
+	"CXXFLAGS=$(CXXFLAGS)" \
+	"DLLTOOL=$(DLLTOOL)" \
+	"RANLIB=$(RANLIB)" \
+	"MAKEINFO=$(MAKEINFO)" \
+	"INSTALL=$(INSTALL)" \
+	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+	"INSTALL_DATA=$(INSTALL_DATA)" \
+	"RUNTEST=$(RUNTEST)" \
+	"RUNTESTFLAGS=$(RUNTESTFLAGS)"
+
+# Flags that we pass when building the testsuite.
+
+# empty for native, $(target_alias)/ for cross
+target_subdir = @target_subdir@
+
+CC_FOR_TARGET = ` \
+  if [ -f $${rootme}/../gcc/xgcc ] ; then \
+    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
+    else \
+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
+    fi; \
+  else \
+    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+      echo $(CC); \
+    else \
+      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+    fi; \
+  fi`
+
+CXX = gcc
+CXX_FOR_TARGET = ` \
+  if [ -f $${rootme}/../gcc/xgcc ] ; then \
+    if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
+    else \
+      echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
+    fi; \
+  else \
+    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+      echo $(CXX); \
+    else \
+      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+    fi; \
+  fi`
+
+CHILLFLAGS = $(CFLAGS)
+CHILL = gcc
+CHILL_FOR_TARGET = ` \
+  if [ -f $${rootme}/../gcc/Makefile ] ; then \
+    echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../gcc/ch/runtime/; \
+  else \
+    if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
+      echo $(CC); \
+    else \
+      t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+    fi; \
+  fi`
+CHILL_LIB = ` \
+  if [ -f $${rootme}/../gcc/ch/runtime/libchill.a ] ; then \
+    echo $${rootme}/../gcc/ch/runtime/chillrt0.o \
+      $${rootme}/../gcc/ch/runtime/libchill.a; \
+  else \
+      echo -lchill; \
+  fi`
+
+# The use of $$(x_FOR_TARGET) reduces the command line length by not
+# duplicating the lengthy definition.
+TARGET_FLAGS_TO_PASS = \
+	"prefix=$(prefix)" \
+	"exec_prefix=$(exec_prefix)" \
+	"against=$(against)" \
+	'CC=$$(CC_FOR_TARGET)' \
+	"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+	"CFLAGS=$(CFLAGS)" \
+	"CHILLFLAGS=$(CHILLFLAGS)" \
+	'CHILL=$$(CHILL_FOR_TARGET)' \
+	"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+	"CHILL_LIB=$(CHILL_LIB)" \
+	'CXX=$$(CXX_FOR_TARGET)' \
+	"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+	"CXXFLAGS=$(CXXFLAGS)" \
+	"INSTALL=$(INSTALL)" \
+	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+	"INSTALL_DATA=$(INSTALL_DATA)" \
+	"MAKEINFO=$(MAKEINFO)" \
+	"RUNTEST=$(RUNTEST)" \
+	"RUNTESTFLAGS=$(RUNTESTFLAGS)"
+
+# All source files that go into linking GDB.
+# Links made at configuration time should not be specified here, since
+# SFILES is used in building the distribution archive.
+
+SFILES = ax-general.c ax-gdb.c bcache.c blockframe.c breakpoint.c \
+	buildsym.c c-exp.y c-lang.c c-typeprint.c c-valprint.c \
+	ch-exp.c ch-lang.c ch-typeprint.c ch-valprint.c coffread.c \
+	command.c complaints.c corefile.c cp-valprint.c dbxread.c \
+	demangle.c dwarfread.c dwarf2read.c elfread.c environ.c eval.c \
+	expprint.c f-exp.y f-lang.c f-typeprint.c f-valprint.c \
+	findvar.c gdbarch.c gdbtypes.c infcmd.c inflow.c infrun.c language.c \
+	jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
+	m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
+	mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
+	printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c \
+	scm-valprint.c source.c stabsread.c stack.c symfile.c \
+	symmisc.c symtab.c target.c thread.c top.c tracepoint.c \
+	typeprint.c utils.c valarith.c valops.c valprint.c values.c \
+	serial.c ser-unix.c mdebugread.c os9kread.c \
+	tui/tui.c tui/tui.h tui/tuiCommand.c tui/tuiCommand.h \
+	tui/tuiData.c tui/tuiData.h tui/tuiDataWin.c tui/tuiDataWin.h \
+	tui/tuiDisassem.c tui/tuiDisassem.h tui/tuiGeneralWin.c \
+	tui/tuiGeneralWin.h tui/tuiIO.c tui/tuiIO.h tui/tuiLayout.c \
+	tui/tuiLayout.h tui/tuiRegs.c tui/tuiRegs.h tui/tuiSource.c \
+	tui/tuiSource.h tui/tuiSourceWin.c tui/tuiSourceWin.h \
+	tui/tuiStack.c tui/tuiStack.h tui/tuiWin.c tui/tuiWin.h
+
+LINTFILES = $(SFILES) $(YYFILES) @CONFIG_SRCS@ init.c
+
+# "system" headers.  Using these in dependencies is a rather personal
+# choice. (-rich, summer 1993)
+# (Why would we not want to depend on them?  If one of these changes in a 
+# non-binary-compatible way, it is a real pain to remake the right stuff
+# without these dependencies -kingdon, 13 Mar 1994)
+getopt_h =	$(INCLUDE_DIR)/getopt.h
+floatformat_h =	$(INCLUDE_DIR)/floatformat.h
+bfd_h =		$(BFD_DIR)/bfd.h
+wait_h =	$(INCLUDE_DIR)/wait.h
+dis-asm_h =	$(INCLUDE_DIR)/dis-asm.h 
+remote-sim_h =	$(INCLUDE_DIR)/remote-sim.h
+
+dcache_h = dcache.h
+remote_utils_h = $(dcache_h) serial.h target.h remote-utils.h $(remote-sim_h)
+
+
+readline_headers = \
+	$(READLINE_SRC)/chardefs.h \
+	$(READLINE_SRC)/history.h \
+	$(READLINE_SRC)/keymaps.h \
+	$(READLINE_SRC)/readline.h
+
+udiheaders = \
+	$(srcdir)/29k-share/udi/udiproc.h \
+	$(srcdir)/29k-share/udi/udiphcfg.h \
+	$(srcdir)/29k-share/udi/udiphunix.h \
+	$(srcdir)/29k-share/udi/udiptcfg.h \
+	$(srcdir)/29k-share/udi/udipt29k.h \
+	$(srcdir)/29k-share/udi/udisoc.h
+
+gdbcore_h =	gdbcore.h $(bfd_h)
+
+frame_h =	frame.h
+symtab_h =	symtab.h bcache.h
+gdbtypes_h =	gdbtypes.h
+expression_h =	expression.h
+value_h =	value.h $(symtab_h) $(gdbtypes_h) $(expression_h)
+
+breakpoint_h =	breakpoint.h $(frame_h) $(value_h)
+
+command_h =	command.h
+gdbcmd_h =	gdbcmd.h $(command_h)
+
+defs_h =	defs.h xm.h tm.h nm.h config.status config.h gdbarch.h
+
+inferior_h =	inferior.h $(breakpoint_h)
+tracepoint_h =	tracepoint.h
+ax_h = 		ax.h
+
+# Header files that need to have srcdir added.  Note that in the cases
+# where we use a macro like $(gdbcmd_h), things are carefully arranged
+# so that each .h file is listed exactly once (M-x tags-search works
+# wrong if TAGS has files twice).  Because this is tricky to get
+# right, it is probably easiest just to list .h files here directly.
+
+HFILES_NO_SRCDIR = bcache.h buildsym.h call-cmds.h coff-solib.h defs.h \
+	dst.h environ.h $(gdbcmd_h) gdbcore.h \
+	gdb-stabs.h hpread.h $(inferior_h) language.h minimon.h monitor.h \
+	objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
+	symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
+	c-lang.h ch-lang.h f-lang.h \
+	jv-lang.h \
+	m2-lang.h \
+	complaints.h valprint.h \
+	29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
+	nindy-share/block_io.h nindy-share/coff.h \
+	nindy-share/env.h nindy-share/stop.h \
+	vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
+	vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
+	vx-share/xdr_ptrace.h vx-share/xdr_rdb.h gdbthread.h \
+	dcache.h remote-utils.h top.h somsolib.h
+
+# Header files that already have srcdir in them, or which are in objdir.
+
+HFILES_WITH_SRCDIR = $(udiheaders) ../bfd/bfd.h
+
+
+# GDB "info" files, which should be included in their entirety
+INFOFILES = gdb.info*
+
+REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
+
+POSSLIBS = gnu-regex.c gnu-regex.h
+
+# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
+# default their values the way we do for SER_HARDWIRE; in the future
+# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
+# variables analogous to SER_HARDWIRE which get defaulted in this
+# Makefile.in
+
+DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) \
+	   $(REMOTE_OBS) $(SIM_OBS) @CONFIG_OBS@
+
+SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) @CONFIG_SRCS@
+# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
+# and it's more useful to see it in the .y file.
+TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
+	$(POSSLIBS)
+TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
+
+COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
+	source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
+	symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
+	expprint.o environ.o gdbarch.o gdbtypes.o copying.o $(DEPFILES) \
+	mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
+	exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \
+	dbxread.o coffread.o elfread.o \
+	dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
+	c-lang.o ch-exp.o ch-lang.o f-lang.o \
+	jv-lang.o jv-valprint.o jv-typeprint.o \
+	m2-lang.o \
+	scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
+	c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
+	c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
+	nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
+
+OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
+
+LIBGDB_OBS = 
+
+TSOBS = inflow.o
+
+NTSOBS = standalone.o
+
+NTSSTART = kdb-start.o
+
+SUBDIRS = doc \
+	testsuite \
+	nlm
+
+# For now, shortcut the "configure GDB for fewer languages" stuff.
+YYFILES = c-exp.tab.c \
+	jv-exp.tab.c \
+	f-exp.tab.c m2-exp.tab.c
+YYOBJ = c-exp.tab.o \
+	jv-exp.tab.o \
+	f-exp.tab.o m2-exp.tab.o
+
+# Things which need to be built when making a distribution.
+
+DISTSTUFF = $(YYFILES)
+
+# Prevent Sun make from putting in the machine type.  Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+	$(CC) -c $(INTERNAL_CFLAGS) $<
+
+all: gdb$(EXEEXT)
+	@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
+
+installcheck:
+
+# The check target can not use subdir_do, because subdir_do does not
+# use TARGET_FLAGS_TO_PASS.
+check: force
+	@if [ -f testsuite/Makefile ]; then \
+	  rootme=`pwd`; export rootme; \
+	  rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
+	  cd testsuite; \
+	  $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
+	else true; fi
+
+info dvi install-info clean-info: force
+	@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
+
+gdb.z:gdb.1
+	nroff -man $(srcdir)/gdb.1 | col -b > gdb.t 
+	pack gdb.t ; rm -f gdb.t
+	mv gdb.t.z gdb.z
+
+# Traditionally "install" depends on "all".  But it may be useful
+# not to; for example, if the user has made some trivial change to a 
+# source file and doesn't care about rebuilding or just wants to save the
+# time it takes for make to check that all is up to date.
+# install-only is intended to address that need.
+install: all install-only
+install-only:
+	transformed_name=`t='$(program_transform_name)'; \
+			  echo gdb | sed -e $$t` ; \
+		if test "x$$transformed_name" = x; then \
+		  transformed_name=gdb ; \
+		else \
+		  true ; \
+		fi ; \
+		$(INSTALL_PROGRAM) gdb$(EXEEXT) $(bindir)/$$transformed_name$(EXEEXT) ; \
+		$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
+	@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do 
+
+uninstall: force
+	transformed_name=`t='$(program_transform_name)'; \
+			  echo gdb | sed -e $$t` ; \
+		if test "x$$transformed_name" = x; then \
+		  transformed_name=gdb ; \
+		else \
+		  true ; \
+		fi ; \
+		rm -f $(bindir)/$$transformed_name$(EXEEXT) $(man1dir)/$$transformed_name.1
+	@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do 
+
+# We do this by grepping through sources.  If that turns out to be too slow,
+# maybe we could just require every .o file to have an initialization routine
+# of a given name (remote-udi.o -> _initialize_remote_udi, etc.).
+#
+# Formatting conventions:  The name of the _initialize_* routines must start
+# in column zero, and must not be inside #if.
+#
+# Note that the set of files with init functions might change, or the names
+# of the functions might change, so this files needs to depend on all the
+# object files that will be linked into gdb.
+
+init.c: $(OBS) $(TSOBS)
+	@echo Making init.c
+	@rm -f init.c-tmp
+	@echo '/* Do not modify this file.  */' >init.c-tmp
+	@echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
+	@echo '#include "ansidecl.h"' >>init.c-tmp
+	@echo 'extern void initialize_all_files PARAMS ((void));' >>init.c-tmp
+	@echo 'void initialize_all_files PARAMS ((void)) {' >>init.c-tmp
+	@-echo $(OBS) $(TSOBS) | \
+	tr ' ' '\012' | \
+	sed -e '/^Onindy.o/d' \
+	    -e '/^nindy.o/d' \
+	    -e '/ttyflush.o/d' \
+	    -e '/xdr_ld.o/d' \
+	    -e '/xdr_ptrace.o/d' \
+	    -e '/xdr_rdb.o/d' \
+	    -e '/udr.o/d' \
+	    -e '/udip2soc.o/d' \
+	    -e '/udi2go32.o/d' \
+	    -e '/version.o/d' \
+	    -e '/^[a-z0-9A-Z_]*_[SU].o/d' \
+	    -e '/[a-z0-9A-Z_]*-exp.tab.o/d' \
+	    -e 's/\.o/.c/' \
+	    -e 's|\([^  ][^     ]*\)|$(srcdir)/\1|g' | \
+	while read f; do grep '^_initialize_[a-z_0-9A-Z]* *(' $$f 2>/dev/null; done | \
+	sed -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/  {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
+	@echo '}' >>init.c-tmp
+	@mv init.c-tmp init.c
+
+.PRECIOUS: init.c
+
+# Removing the old gdb first works better if it is running, at least on SunOS.
+gdb$(EXEEXT): $(OBS) $(BUILD_TUI) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
+	rm -f gdb$(EXEEXT)
+	$(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) -o gdb$(EXEEXT) \
+	  init.o $(OBS) $(TSOBS) $(TUI_LIBRARY) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
+
+nlm:	force
+	rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
+
+libgdb:	libgdb-files $(LIBGDB_OBS)
+
+# libproc is not listed here because all-libproc is a dependency of all-gui,
+# not all-gdb, and thus might be built after us.
+LIBGDBDEPS=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
+# libproc needs to be before libiberty for alloca.
+LIBGDBFILES=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) ../libproc/libproc.a \
+  $(ADD_DEPS) $(CDEPS) init.o
+
+libgdb-files: $(LIBGDBDEPS) Makefile.in
+	-rm -f libgdb-files
+	for i in $(LIBGDBFILES); do\
+		echo $$i >> libgdb-files;\
+	done
+
+saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
+	#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
+	#load ./init.c $(SFILES)
+	#unload $(srcdir)/c-exp.y
+	#unload $(srcdir)/jv-exp.y
+	#unload $(srcdir)/m2-exp.y
+	#unload vx-share/*.h
+	#unload nindy-share/[A-Z]*
+	#load c-exp.tab.c
+	#load jv-exp.tab.c
+	#load m2-exp.tab.c
+	#load copying.c version.c
+	#load ../opcodes/libopcodes.a
+	#load ../libiberty/libiberty.a
+	#load ../bfd/libbfd.a
+	#load ../readline/libreadline.a
+	#load ../mmalloc/libmmalloc.a
+	#load ../intl/libintl.a
+	#load -ltermcap 
+	#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
+	echo "Load .c corresponding to:" $(DEPFILES)
+
+
+# A Mach 3.0 program to force gdb back to command level
+
+stop-gdb: stop-gdb.o
+	${CC_LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o stop-gdb \
+	stop-gdb.o $(CLIBS) $(LOADLIBES)
+
+# This is useful when debugging GDB, because some Unix's don't let you run GDB
+# on itself without copying the executable.  So "make gdb1" will make
+# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
+# Removing gdb1 before the copy is the right thing if gdb1 is open
+# in another process.
+gdb1$(EXEEXT): gdb$(EXEEXT)
+	rm -f gdb1$(EXEEXT)
+	cp gdb$(EXEEXT) gdb1$(EXEEXT)
+
+# FIXME. These are not generated by "make depend" because they only are there
+# for some machines.
+# But these rules don't do what we want; we want to hack the foo.o: tm.h
+# dependency to do the right thing.
+tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
+tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
+xm-news1000.h: xm-news.h
+xm-i386-sv32.h: xm-i386.h
+tm-i386gas.h: tm-i386.h
+xm-sun4os4.h: xm-sparc.h
+tm-sun4os4.h: tm-sparc.h
+xm-vaxult.h: xm-vax.h
+xm-vaxbsd.h: xm-vax.h
+
+kdb:	$(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS) $(CDEPS)
+	ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
+	  -lc $(CLIBS)
+
+# Have the TUI library depend on a phony target, so we'll always
+# recurse and make sure it's up to date.  If it is, then the file will
+# be unchanged, and we won't rebuild it.
+# .PHONY: check-tui
+all-tui: 
+	@(cd tui; ${MAKE} ${FLAGS_TO_PASS} all)
+
+# Put the proper machine-specific files first, so M-. on a machine
+# specific routine gets the one for the correct machine.  (FIXME: those
+# files go in twice; we should be removing them from the main list).
+
+# TAGS depends on all the files that go into it so you can rebuild TAGS
+# with `make TAGS' and not have to say `rm TAGS' first.
+
+TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
+	@echo Making TAGS
+	@etags $(srcdir)/$(TM_FILE) \
+	  $(srcdir)/$(XM_FILE) \
+	  $(srcdir)/$(NAT_FILE) \
+	`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
+		echo $(srcdir)/$$i ; \
+	done ; for i in $(TAGFILES_WITH_SRCDIR); do \
+		echo $$i ; \
+	done) | sed -e 's/\.o$$/\.c/'` \
+	`find $(srcdir)/config -name '*.h' -print`
+
+tags: TAGS
+
+clean mostlyclean:
+	@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do 
+	rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp
+	rm -f init.c version.c
+	rm -f gdb$(EXEEXT) core make.log libgdb-files
+	rm -f gdb[0-9]$(EXEEXT)
+
+# This used to depend on c-exp.tab.c m2-exp.tab.c TAGS
+# I believe this is wrong; the makefile standards for distclean just
+# describe removing files; the only sort of "re-create a distribution"
+# functionality described is if the distributed files are unmodified.
+distclean: clean
+	@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do 
+	rm -f nm.h tm.h xm.h config.status config.h stamp-h .gdbinit
+	rm -f y.output yacc.acts yacc.tmp y.tab.h
+	rm -f config.log config.cache
+	rm -f Makefile
+
+maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
+realclean: maintainer-clean
+
+local-maintainer-clean:
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f c-exp.tab.c \
+		jv-exp.tab \
+		f-exp.tab.c m2-exp.tab.c
+	rm -f TAGS $(INFOFILES)
+	rm -f $(YYFILES)
+	rm -f nm.h tm.h xm.h config.status
+
+do-maintainer-clean:
+	@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" \
+		subdir_do
+
+diststuff: $(DISTSTUFF)
+	cd doc; $(MAKE) $(MFLAGS) all-doc
+
+subdir_do: force
+	@for i in $(DODIRS); do \
+		if [ -f ./$$i/Makefile ] ; then \
+			if (cd ./$$i; \
+				$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
+			else exit 1 ; fi ; \
+		else true ; fi ; \
+	done
+
+Makefile: Makefile.in config.status @frags@
+	$(SHELL) config.status
+
+config.h: stamp-h ; @true
+stamp-h: config.in config.status
+	CONFIG_HEADERS=config.h:config.in $(SHELL) config.status
+
+config.status: configure
+	$(SHELL) config.status --recheck
+
+force:
+
+# Documentation!
+# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
+doc/refcard.dvi:
+	cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
+
+# GDB QUICK REFERENCE (PostScript output, common PS fonts)
+doc/refcard.ps:
+	cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
+
+# GDB MANUAL: TeX dvi file
+doc/gdb.dvi:
+	cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
+
+# GDB MANUAL: info file
+doc/gdb.info:
+	cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
+
+# Make copying.c from COPYING
+copying.c: COPYING copying.awk
+	awk -f $(srcdir)/copying.awk < $(srcdir)/COPYING > copying.c
+
+version.c: Makefile
+	echo 'char *version = "$(VERSION)";' >version.c
+	echo 'char *host_name = "$(host_alias)";' >> version.c
+	echo 'char *target_name = "$(target_alias)";' >> version.c
+
+# c-exp.tab.c is generated in objdir from c-exp.y if it doesn't exist
+# in srcdir, then compiled in objdir to c-exp.tab.o.
+
+# If we said c-exp.tab.c rather than ./c-exp.tab.c some makes
+# would sometimes re-write it into $(srcdir)/c-exp.tab.c.
+
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.  Strictly speaking c-exp.tab.c should therefore depend on
+# Makefile.in, but that was a pretty big annoyance.
+c-exp.tab.o: c-exp.tab.c
+c-exp.tab.c: c-exp.y
+	$(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/c-exp.y  y.tab.c c-exp.tmp -- $(YFLAGS) 
+	-sed -e '/extern.*malloc/d' \
+	     -e '/extern.*realloc/d' \
+	     -e '/extern.*free/d' \
+	     -e '/include.*malloc.h/d' \
+	     -e 's/malloc/xmalloc/g' \
+	     -e 's/realloc/xrealloc/g' \
+	     -e '/^#line.*y.tab.c/d' \
+	  < c-exp.tmp > c-exp.new
+	-rm c-exp.tmp
+	mv c-exp.new ./c-exp.tab.c
+
+jv-exp.tab.o: jv-exp.tab.c
+jv-exp.tab.c: jv-exp.y
+	$(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/jv-exp.y  y.tab.c jv-exp.tmp -- $(YFLAGS) 
+	-sed -e '/extern.*malloc/d' \
+	     -e '/extern.*realloc/d' \
+	     -e '/extern.*free/d' \
+	     -e '/include.*malloc.h/d' \
+	     -e 's/malloc/xmalloc/g' \
+	     -e 's/realloc/xrealloc/g' \
+	     -e '/^#line.*y.tab.c/d' \
+	  < jv-exp.tmp > jv-exp.new
+	-rm jv-exp.tmp
+	mv jv-exp.new ./jv-exp.tab.c
+
+f-exp.tab.o: f-exp.tab.c
+f-exp.tab.c: f-exp.y c-exp.tab.c
+	$(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/f-exp.y  y.tab.c f-exp.tmp -- $(YFLAGS) 
+	-sed -e '/extern.*malloc/d' \
+	     -e '/extern.*realloc/d' \
+	     -e '/extern.*free/d' \
+	     -e '/include.*malloc.h/d' \
+	     -e 's/malloc/xmalloc/g' \
+	     -e 's/realloc/xrealloc/g' \
+	     -e '/^#line.*y.tab.c/d' \
+	  < f-exp.tmp > f-exp.new
+	-rm f-exp.tmp
+	mv f-exp.new ./f-exp.tab.c
+
+# m2-exp.tab.c is generated in objdir from m2-exp.y if it doesn't exist
+# in srcdir, then compiled in objdir to m2-exp.tab.o.
+# Remove bogus decls for malloc/realloc/free which conflict with everything
+# else.
+m2-exp.tab.o: m2-exp.tab.c
+m2-exp.tab.c: m2-exp.y
+	$(SHELL) $(YLWRAP) "$(YACC)" $(srcdir)/m2-exp.y  y.tab.c m2-exp.tmp -- $(YFLAGS) 
+	-sed -e '/extern.*malloc/d' \
+	     -e '/extern.*realloc/d' \
+	     -e '/extern.*free/d' \
+	     -e '/include.*malloc.h/d' \
+	     -e 's/malloc/xmalloc/g' \
+	     -e 's/realloc/xrealloc/g' \
+	     -e '/^#line.*y.tab.c/d' \
+	  < m2-exp.tmp > m2-exp.new
+	-rm m2-exp.tmp
+	mv m2-exp.new ./m2-exp.tab.c
+
+# These files are updated atomically, so make never has to remove them
+.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
+.PRECIOUS: jv-exp.tab.c
+
+lint: $(LINTFILES)
+	$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
+	   `echo $(DEPFILES) | sed 's/\.o /\.c /g'`
+
+gdb.cxref: $(SFILES)
+	cxref -I. $(SFILES) >gdb.cxref
+
+force_update:
+
+# GNU Make has an annoying habit of putting *all* the Makefile variables
+# into the environment, unless you include this target as a circumvention.
+# Rumor is that this will be fixed (and this target can be removed)
+# in GNU Make 4.0.
+.NOEXPORT:
+
+# GNU Make 3.63 has a different problem: it keeps tacking command line
+# overrides onto the definition of $(MAKE).  This variable setting
+# will remove them.
+MAKEOVERRIDES=
+
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment.  Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+
+ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
+	29k-share/udi/udi2go32.c \
+	a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
+	altos-xdep.c arm-convert.s \
+	arm-tdep.c arm-xdep.c coff-solib.c \
+	convex-tdep.c convex-xdep.c \
+	core-sol2.c core-regset.c core-aout.c corelow.c \
+	dcache.c delta68-nat.c dpx2-nat.c dstread.c exec.c fork-child.c \
+	go32-xdep.c gould-tdep.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
+	hp300ux-nat.c hppa-tdep.c hppab-nat.c hppah-nat.c \
+        hp-psymtab-read.c hp-symtab-read.c \
+	i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
+	i386aix-nat.c i386m3-nat.c i386v4-nat.c i386ly-tdep.c \
+	i387-tdep.c \
+	i960-tdep.c \
+	infptrace.c inftarg.c irix4-nat.c irix5-nat.c isi-xdep.c \
+	lynx-nat.c m3-nat.c \
+	m68k-tdep.c \
+	m88k-nat.c m88k-tdep.c mac-nat.c mips-nat.c \
+	mips-tdep.c mipsm3-nat.c mipsv4-nat.c news-xdep.c \
+	nindy-share/Onindy.c nindy-share/nindy.c \
+	nindy-share/ttyflush.c nindy-tdep.c \
+	ns32k-tdep.c ns32km3-nat.c osfsolib.c \
+	somread.c somsolib.c $(HPREAD_SOURCE) \
+	procfs.c pyr-tdep.c pyr-xdep.c \
+	remote-adapt.c remote-array.c remote-bug.c remote-e7000.c remote-eb.c \
+	remote-es.c remote-hms.c remote-mips.c \
+	remote-mm.c remote-nindy.c remote-os9k.c remote-rdp.c remote-sim.c \
+	remote-st.c remote-utils.c dcache.c \
+	remote-udi.c remote-vx.c remote-vx29k.c \
+	rs6000-nat.c rs6000-tdep.c \
+	ser-go32.c ser-ocd.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
+	sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
+	symm-tdep.c symm-nat.c \
+	tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
+	vax-tdep.c \
+	vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
+	win32-nat.c \
+	xcoffread.c xcoffsolib.c z8k-tdep.c
+
+udip2soc.o: $(srcdir)/29k-share/udi/udip2soc.c $(udiheaders)
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udip2soc.c
+
+udi2go32.o: $(srcdir)/29k-share/udi/udi2go32.c $(udiheaders)
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udi2go32.c
+
+udr.o: $(srcdir)/29k-share/udi/udr.c $(udiheaders) 
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udr.c
+
+a29k-tdep.o: a29k-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
+
+a68v-nat.o: a68v-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+alpha-nat.o: alpha-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
+
+alpha-tdep.o: alpha-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) $(symtab_h) $(dis-asm.h) gdb_string.h
+
+altos-xdep.o: altos-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+annotate.o: annotate.c $(defs_h) annotate.h $(value_h) target.h $(gdbtypes_h)
+
+arm-tdep.o: arm-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
+	$(gdbcore_h)
+
+bcache.o: bcache.c bcache.h $(defs_h)
+
+blockframe.o: blockframe.c $(defs_h) $(gdbcore_h) $(inferior_h) \
+	objfiles.h symfile.h target.h
+
+breakpoint.o: breakpoint.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) language.h target.h gdbthread.h gdb_string.h
+
+buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	objfiles.h symfile.h $(symtab_h) gdb_string.h
+
+c-lang.o: c-lang.c c-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h parser-defs.h $(symtab_h)
+
+c-typeprint.o: c-typeprint.c c-lang.h $(defs_h) $(expression_h) \
+	$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
+	target.h typeprint.h $(value_h) gdb_string.h
+
+c-valprint.o: c-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h $(symtab_h) valprint.h $(value_h)
+
+f-lang.o: f-lang.c f-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h parser-defs.h $(symtab_h) gdb_string.h
+
+f-typeprint.o: f-typeprint.c f-lang.h $(defs_h) $(expression_h) \
+	$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
+	target.h typeprint.h $(value_h) gdb_string.h
+
+f-valprint.o: f-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h $(symtab_h) valprint.h $(value_h) gdb_string.h
+
+ch-exp.o: ch-exp.c ch-lang.h $(defs_h) language.h parser-defs.h $(bfd_h) symfile.h objfiles.h $(value_h)
+
+ch-lang.o: ch-lang.c ch-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h parser-defs.h $(symtab_h)
+
+ch-typeprint.o: ch-typeprint.c ch-lang.h $(defs_h) $(expression_h) \
+	$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
+	target.h $(value_h) typeprint.h gdb_string.h
+
+ch-valprint.o: ch-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h $(symtab_h) valprint.h $(value_h) c-lang.h
+
+coff-solib.o: coff-solib.c $(defs_h)
+
+coffread.o: coffread.c $(bfd_h) $(breakpoint_h) buildsym.h \
+	complaints.h $(defs_h) $(expression_h) $(gdbtypes_h) objfiles.h \
+	symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h \
+	gdb_string.h
+
+command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+	$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h $(wait_h)
+
+complaints.o: complaints.c complaints.h $(defs_h) $(gdbcmd_h)
+
+convex-tdep.o: convex-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(inferior_h)
+
+convex-xdep.o: convex-xdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h)
+
+copying.o: copying.c $(defs_h) $(gdbcmd_h)
+
+core-aout.o: core-aout.c $(defs_h) $(gdbcore_h) $(value_h) $(inferior_h)
+
+core-sol2.o: core-sol2.c $(command_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h gdb_string.h
+
+core-regset.o: core-regset.c $(command_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h gdb_string.h
+
+corefile.o: corefile.c $(dis-asm_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) target.h language.h gdb_string.h
+
+corelow.o: corelow.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+	target.h gdbthread.h gdb_string.h
+
+cp-valprint.o: cp-valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+	$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h
+
+dcache.o: dcache.c $(dcache_h) $(defs_h) $(gdbcmd_h) gdb_string.h $(gdbcore_h)
+
+dbxread.o: dbxread.c $(breakpoint_h) buildsym.h $(command_h) \
+	complaints.h $(defs_h) $(expression_h) gdb-stabs.h $(gdbcore_h) \
+	$(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \
+	symfile.h $(symtab_h) target.h gdb_string.h
+
+delta68-nat.o: delta68-nat.c $(defs_h)
+
+demangle.o: demangle.c $(defs_h) $(gdbcmd_h) gdb_string.h
+
+dink32-rom.o: dink32-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
+dpx2-nat.o: dpx2-nat.c $(defs_h) $(gdbcore_h) gdb_string.h
+
+dstread.o: dstread.c gdb_string.h
+
+dwarfread.o: dwarfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
+	$(symtab_h) gdb_string.h
+
+dwarf2read.o: dwarf2read.c $(bfd_h) buildsym.h $(defs_h) \
+	$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
+	$(symtab_h) gdb_string.h
+
+elfread.o: elfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h \
+	$(BFD_SRC)/elf-bfd.h $(INCLUDE_DIR)/elf/mips.h
+
+environ.o: environ.c $(defs_h) environ.h $(gdbcore_h) gdb_string.h
+
+eval.o: eval.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
+	$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
+	gdb_string.h
+
+exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
+	target.h language.h gdb_string.h
+
+expprint.o: expprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h parser-defs.h $(symtab_h) $(value_h)
+
+findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
+	gdb_string.h
+
+fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
+
+tracepoint.o: tracepoint.c $(defs_h) $(symtab_h) $(frame_h) $(tracepoint_h) \
+	$(gdbtypes_h) $(expression_h) $(gdbcmd_h) $(value_h) target.h \
+	language.h gdb_string.h $(readline_headers)
+
+gdbarch.o: gdbarch.c $(defs_h) $(bfd_h) $(gdbcmd_h)
+
+gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
+	$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
+	$(value_h) gdb_string.h
+
+gnu-nat.o: process_reply_S.h exc_request_S.h notify_S.h msg_reply_S.h \
+	exc_request_U.h msg_U.h gnu-nat.h
+
+go32-xdep.o: go32-xdep.c
+
+# OBSOLETE gould-tdep.o: gould-tdep.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
+# OBSOLETE	$(gdbcore_h) $(symtab_h)
+
+# OBSOLETE gould-xdep.o: gould-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+h8300-tdep.o: h8300-tdep.c $(defs_h) $(frame_h) $(symtab_h)
+
+h8500-tdep.o: h8500-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) \
+	$(expression_h) $(frame_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) \
+	$(value_h)
+
+hp300ux-nat.o: hp300ux-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+hppa-tdep.o: hppa-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) objfiles.h symfile.h target.h
+
+hppab-nat.o: hppab-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
+
+hppah-nat.o: hppah-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
+
+i386gnu-nat.o: gnu-nat.h
+
+i386-tdep.o: i386-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
+	gdb_string.h
+
+i386aix-nat.o: i386aix-nat.c $(defs_h) $(frame_h) $(inferior_h) \
+	language.h $(gdbcore_h) $(floatformat_h) target.h
+
+i386b-nat.o: i386b-nat.c $(defs_h) 
+
+i386ly-nat.o: i386ly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
+
+i386ly-tdep.o: i386ly-tdep.c $(defs_h) $(inferior_h) target.h $(gdbcore_h)
+
+i386m3-nat.o: i386m3-nat.c $(defs_h) $(inferior_h) $(floatformat_h) target.h
+
+i386mach-nat.o: i386mach-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) 
+
+i386v-nat.o: i386v-nat.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) language.h target.h
+
+i386v4-nat.o: i386v4-nat.c $(defs_h)
+
+i387-tdep.o: i387-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) language.h
+
+i960-tdep.o: i960-tdep.c $(floatformat_h) $(defs_h) $(expression_h) \
+	$(frame_h) $(gdbtypes_h) $(symtab_h) $(value_h) $(gdbcore_h)
+
+infcmd.o: infcmd.c $(defs_h) environ.h $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) target.h language.h gdb_string.h
+
+inflow.o: inflow.c $(bfd_h) $(command_h) $(defs_h) $(inferior_h) \
+	signals.h target.h terminal.h gdbthread.h gdb_string.h
+
+infptrace.o: infptrace.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
+	gdb_string.h $(wait_h) $(command_h)
+
+infrun.o: infrun.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) target.h gdbthread.h gdb_string.h
+
+inftarg.o: inftarg.c $(wait_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+	target.h terminal.h $(command_h)
+
+irix4-nat.o: irix4-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
+irix5-nat.o: irix5-nat.c $(defs_h) $(inferior_h) $(gdbcore_h) target.h \
+	$(symtab_h) symfile.h objfiles.h $(command_h) $(frame_h) gnu-regex.h \
+	language.h gdb_string.h
+
+isi-xdep.o: isi-xdep.c
+
+jv-lang.o: jv-lang.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+	$(expression_h) parser-defs.h language.h symfile.h objfiles.h \
+	gdb_string.h $(value_h) c-lang.h jv-lang.h $(gdbcore_h)
+
+jv-typeprint.o: jv-typeprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+	$(value_h) $(INCLUDE_DIR)/demangle.h jv-lang.h gdb_string.h \
+	typeprint.h
+
+jv-valprint.o: jv-valprint.c $(bfd_h) $(defs_h) $(symtab_h) $(gdbtypes_h) \
+	$(expression_h) $(value_h) $(INCLUDE_DIR)/demangle.h valprint.h \
+	language.h jv-lang.h c-lang.h
+
+language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
+	$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
+	target.h $(value_h) gdb_string.h
+
+lynx-nat.o: lynx-nat.c $(defs_h) $(frame_h) $(inferior_h) $(gdbcore_h) \
+	target.h
+
+m2-lang.o: m2-lang.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h m2-lang.h parser-defs.h $(symtab_h)
+
+m2-typeprint.o: m2-typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(gdbtypes_h) language.h m2-lang.h $(symtab_h) target.h \
+	$(value_h) gdb_string.h
+
+m2-valprint.o: m2-valprint.c $(defs_h) $(gdbtypes_h) $(symtab_h) \
+	valprint.h m2-lang.h
+
+m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
+	$(wait_h) $(gdbcmd_h) $(gdbcore_h)
+
+m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(value_h) \
+	$(gdbcore_h) gdb_string.h
+
+m68kly-nat.o: m68kly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
+
+m68klinux-nat.o: m68klinux-nat.c $(defs_h) $(frame_h) $(inferior_h) \
+	$(language_h) $(gdbcore_h) $(floatformat_h) target.h
+
+m88k-nat.o: m88k-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+mac-nat.o: mac-nat.c $(defs_h) gdb_string.h
+
+main.o: main.c top.h $(defs_h) gdb_string.h
+
+maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
+	$(expression_h) objfiles.h symfile.h
+
+mdebugread.o: mdebugread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
+	$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
+	objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
+	gdb_string.h
+
+mipsm3-nat.o: mipsm3-nat.c $(defs_h) $(inferior_h)
+
+os9kread.o: os9kread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
+        $(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
+        objfiles.h stabsread.h symfile.h $(symtab_h) \
+	target.h gdb_string.h
+
+mem-break.o: mem-break.c $(defs_h) 
+
+minsyms.o: minsyms.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
+	$(symtab_h) gdb_string.h
+
+mips-nat.o: mips-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) 
+
+mips-tdep.o: mips-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) language.h objfiles.h symfile.h gdb_string.h
+
+mipsread.o: mipsread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
+	$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
+	objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
+	gdb_string.h
+
+mipsv4-nat.o: mipsv4-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
+
+monitor.o: monitor.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h gdb_string.h
+
+news-xdep.o: news-xdep.c
+
+Onindy.o: nindy-share/Onindy.c $(wait_h) nindy-share/block_io.h \
+	nindy-share/env.h
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/Onindy.c
+
+nindy.o: nindy-share/nindy.c $(wait_h) nindy-share/block_io.h \
+	nindy-share/env.h
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/nindy.c
+
+nlmread.o: nlmread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	gdb-stabs.h objfiles.h symfile.h $(symtab_h) stabsread.h \
+	gdb_string.h
+
+ns32km3-nat.o: ns32km3-nat.c $(defs_h) $(inferior_h)
+
+ttyflush.o: nindy-share/ttyflush.c
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttyflush.c
+
+nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h)  $(gdbcore_h)
+
+ns32k-tdep.o: ns32k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h)
+
+objfiles.o: objfiles.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
+	$(symtab_h) gdb_string.h
+
+osfsolib.o: osfsolib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+	objfiles.h gnu-regex.h symfile.h target.h language.h gdb_string.h
+
+somread.o: somread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
+
+somsolib.o: somsolib.c $(defs_h)
+
+hpux-thread.o: hpux-thread.c $(defs_h) gdbthread.h target.h inferior.h
+	$(CC) -c $(INTERNAL_CFLAGS) -I$(srcdir)/osf-share \
+	  -I$(srcdir)/osf-share/HP800 -I/usr/include/dce $(srcdir)/hpux-thread.c
+
+# FIXME!!!
+hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
+	gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
+
+hp-psymtab-read.o: hp-psymtab-read.c hpread.h $(bfd_h) buildsym.h complaints.h \
+	$(defs_h) gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
+ 
+hp-symtab-read.o: hp-symtab-read.c hpread.h $(bfd_h) buildsym.h complaints.h \
+	$(defs_h) gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
+# END FIXME!!!  
+
+parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
+	$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
+	gdb_string.h
+
+ppc-bdm.o: ppc-bdm.c $(defs_h) $(gdbcore_h) gdb_string.h $(frame_h) \
+	$(inferior_h) $(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) \
+	objfiles.h gdb-stabs.h serial.h ocd.h
+
+ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
+printcmd.o: printcmd.c $(breakpoint_h) $(defs_h) $(expression_h) \
+	$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
+	symfile.h $(symtab_h) target.h gdb_string.h
+
+procfs.o: procfs.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+	target.h gdb_string.h
+
+pyr-tdep.o: pyr-tdep.c $(defs_h) 
+
+pyr-xdep.o: pyr-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h) 
+
+gnu-regex.o: gnu-regex.c gnu-regex.h $(defs_h) gdb_string.h
+
+remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h terminal.h gdb_string.h
+
+remote-array.o: remote-array.c $(wait_h) $(defs_h) $(gdbcore_h) target.h \
+      gdb_string.h $(command_h) serial.h monitor.h $(remote_utils_h)
+
+remote-rdi.o: remote-rdi.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) gdb_string.h
+
+rdi-share/libangsd.a:	force
+	@dir=rdi-share; \
+	if [ -f ./$${dir}/Makefile ] ; then \
+	  r=`pwd`; export r; \
+	  srcroot=`cd $(srcdir); pwd`; export srcroot; \
+	  (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
+	else \
+	  true; \
+	fi
+
+remote-d10v.o: remote-d10v.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
+remote-rdp.o: remote-rdp.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) gdb_string.h
+
+remote-bug.o: remote-bug.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h terminal.h $(remote_utils_h) gdb_string.h
+
+remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) target.h \
+	$(wait_h) serial.h gdb_string.h
+
+remote-eb.o: remote-eb.c $(wait_h) $(srcdir)/config/a29k/tm-a29k.h \
+	$(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h \
+	gdb_string.h
+
+remote-es.o: remote-es.c $(bfd_h) $(wait_h) $(command_h) $(defs_h) \
+	$(inferior_h) $(remote_utils_h) terminal.h gdb_string.h
+
+remote-hms.o: remote-hms.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) serial.h target.h terminal.h gdb_string.h
+
+remote-mips.o: remote-mips.c $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(inferior_h) serial.h symfile.h target.h
+
+remote-mm.o: remote-mm.c $(bfd_h) $(wait_h) $(defs_h) $(inferior_h) \
+	minimon.h target.h terminal.h gdb_string.h
+
+remote-nindy.o: remote-nindy.c $(floatformat_h) $(wait_h) $(command_h) \
+	$(defs_h) $(gdbcore_h) $(inferior_h) \
+	nindy-share/env.h nindy-share/stop.h $(remote_utils_h) \
+	symfile.h
+
+remote-os9k.o: remote-os9k.c $(defs_h) $(gdbcore_h) $(wait_h) \
+	$(command_h) monitor.h $(remote_utils_h) $(symtab_h) symfile.h \
+	objfiles.h gdb-stabs.h gdb_string.h
+
+remote-sds.o: remote-sds.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
+remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) target.h terminal.h gdb_string.h \
+	$(INCLUDE_DIR)/callback.h
+
+remote-st.o: remote-st.c $(wait_h) $(defs_h) $(gdbcore_h) serial.h \
+	target.h gdb_string.h
+
+remote-udi.o: remote-udi.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h terminal.h $(udiheaders) gdb_string.h
+
+remote-vx.o: remote-vx.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
+	vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
+	vx-share/xdr_rdb.h gdb-stabs.h objfiles.h symfile.h $(bfd_h) \
+	gdb_string.h
+
+remote-vx29k.o: remote-vx29k.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
+        $(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
+        vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
+        vx-share/xdr_rdb.h gdb_string.h
+
+ocd.o: ocd.c ocd.h $(gdbcore_h) gdb_string.h $(frame_h) $(inferior_h) \
+	$(bfd_h) symfile.h target.h $(wait_h) $(gdbcmd_h) objfiles.h \
+	gdb-stabs.h $(dcache_h) serial.h
+
+remote-utils.o: remote-utils.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
+	$(inferior_h) $(remote_utils_h) gdb_string.h
+
+remote.o: remote.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
+
+remote-nrom.o: remote-nrom.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) $(remote_utils_h) symfile.h terminal.h
+
+rom68k-rom.o: rom68k-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
+rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h \
+	xcoffsolib.h
+
+rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
+	target.h xcoffsolib.h
+
+scm-exp.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
+	scm-lang.h scm-tags.h
+
+scm-lang.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
+	scm-lang.h scm-tags.h gdb_string.h $(gdbcore_h)
+
+scm-valprint.o: $(defs_h) $(value_h) parser-defs.h language.h  \
+	scm-lang.h valprint.h $(gdbcore_h)
+
+ser-go32.o: ser-go32.c $(defs_h) serial.h 
+
+ser-mac.o: ser-mac.c $(defs_h) serial.h signals.h
+
+ser-ocd.o: ser-ocd.c $(defs_h) serial.h signals.h gdb_string.h
+
+ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h gdb_string.h
+
+ser-unix.o: ser-unix.c $(defs_h) serial.h 
+
+serial.o: serial.c $(defs_h) serial.h gdb_string.h
+
+sh-tdep.o: sh-tdep.c $(bfd_h) $(dis-asm_h) \
+	$(srcdir)/../opcodes/sh-opc.h $(defs_h) $(expression_h) $(frame_h) \
+	$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(value_h)
+
+sh3-rom.o: sh3-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
+mon960-rom.o: mon960-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
+	$(inferior_h) target.h serial.h terminal.h
+
+solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
+	objfiles.h gnu-regex.h symfile.h target.h gdb_string.h
+
+source.o: source.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
+	$(gdbcore_h) language.h objfiles.h gnu-regex.h symfile.h $(symtab_h) \
+	gdb_string.h
+
+sparc-nat.o: sparc-nat.c $(bfd_h) $(defs_h) $(inferior_h) $(gdbcore_h) \
+	target.h
+
+sparc-tdep.o: sparc-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
+	$(inferior_h) objfiles.h symfile.h target.h gdb_string.h
+
+sparcl-tdep.o: sparcl-tdep.c $(defs_h) $(gdbcore_h) target.h
+
+dsrec.o: dsrec.c $(defs_h) srec.h
+
+stabsread.o: stabsread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
+	$(INCLUDE_DIR)/aout/stab_gnu.h buildsym.h complaints.h $(defs_h) \
+	$(gdbtypes_h) objfiles.h stabsread.h symfile.h $(symtab_h) \
+	gdb_string.h
+
+stack.o: stack.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
+	language.h target.h gdb_string.h
+
+ax-general.o: ax-general.c $(ax_h) $(defs_h)
+ax-gdb.o: ax-gdb.c $(defs_h) $(symtab_h) symfile.h $(gdbtypes_h) \
+	$(value_h) $(expression_h) $(command_h) $(ax_h) $(gdbcmd_h) ax-gdb.h
+
+sun3-nat.o: sun3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
+
+symfile.o: symfile.c $(breakpoint_h) complaints.h $(defs_h) \
+	$(expression_h) $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) \
+	language.h objfiles.h symfile.h $(symtab_h) target.h \
+	gdb_string.h
+
+symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+symm-nat.o: symm-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+symmisc.o: symmisc.c $(bfd_h) $(breakpoint_h) $(command_h) $(defs_h) \
+	$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
+	$(symtab_h) gdb_string.h
+
+symtab.o: symtab.c call-cmds.h $(defs_h) $(expression_h) $(frame_h) \
+	$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
+	gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
+	gdb_string.h
+
+tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
+	$(symtab_h)
+
+target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
+	objfiles.h symfile.h target.h gdb_string.h
+
+thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h)
+
+top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
+	$(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \
+	$(remote_utils_h) gdb_string.h
+
+typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
+	$(value_h) gdb_string.h
+
+ultra3-nat.o: ultra3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+ultra3-xdep.o: ultra3-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+umax-xdep.o: umax-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
+
+utils.o: utils.c $(bfd_h) $(defs_h) $(expression_h) $(gdbcmd_h) \
+	language.h signals.h target.h terminal.h $(readline_headers) \
+	gdb_string.h
+
+valarith.o: valarith.c $(bfd_h) $(defs_h) $(expression_h) \
+	$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
+	gdb_string.h
+
+valops.o: valops.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
+	gdb_string.h
+
+valprint.o: valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
+	$(value_h) gdb_string.h valprint.h
+
+values.o: values.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
+	$(gdbcore_h) $(gdbtypes_h) $(symtab_h) target.h $(value_h) \
+	gdb_string.h scm-lang.h
+
+vax-tdep.o: vax-tdep.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
+
+w65-tdep.o : w65-tdep.c $(gdbcore_h)
+
+win32-nat.o: win32-nat.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
+	gdb_string.h
+
+xdr_ld.o: vx-share/xdr_ld.c $(defs_h) vx-share/vxTypes.h \
+	vx-share/vxWorks.h vx-share/xdr_ld.h
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ld.c
+
+xdr_ptrace.o: vx-share/xdr_ptrace.c $(defs_h) vx-share/vxTypes.h \
+	vx-share/vxWorks.h vx-share/xdr_ptrace.h
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ptrace.c
+
+xdr_rdb.o: vx-share/xdr_rdb.c $(defs_h) vx-share/vxTypes.h \
+	vx-share/vxWorks.h vx-share/xdr_rdb.h
+	$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_rdb.c
+
+xcoffread.o: xcoffread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
+	$(INCLUDE_DIR)/aout/stab_gnu.h $(INCLUDE_DIR)/coff/internal.h \
+	$(INCLUDE_DIR)/coff/rs6000.h $(BFD_SRC)/libcoff.h buildsym.h \
+	complaints.h $(defs_h) $(gdbtypes_h) objfiles.h stabsread.h symfile.h \
+	$(symtab_h) partial-stab.h gdb_string.h
+
+xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h
+
+z8k-tdep.o: z8k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) $(frame_h) \
+	$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(gdbcore_h)
+
+c-exp.tab.o: c-exp.tab.c c-lang.h $(defs_h) $(expression_h) \
+	$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
+	$(bfd_h) objfiles.h symfile.h
+
+jv-exp.tab.o: jv-exp.tab.c jv-lang.h $(defs_h) $(expression_h) \
+	$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
+	$(bfd_h) objfiles.h symfile.h
+
+f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
+	language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h
+
+m2-exp.tab.o: m2-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
+	language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
+	$(bfd_h) objfiles.h symfile.h
+
+### end of the gdb Makefile.in.
diff --git a/gdb/NEWS b/gdb/NEWS
new file mode 100644
index 0000000..e6aaba3
--- /dev/null
+++ b/gdb/NEWS
@@ -0,0 +1,1611 @@
+		What has changed in GDB?
+	     (Organized release by release)
+
+*** Changes in GDB-4.18:
+
+* New native configurations
+
+HP-UX 10.20					hppa*-*-hpux10.20
+HP-UX 11.x					hppa*-*-hpux11.0*
+M68K Linux					m68*-*-linux*
+
+* New targets
+
+Fujitsu FR30					fr30-*-elf*
+Intel StrongARM					strongarm-*-*
+Mitsubishi D30V					d30v-*-*
+
+* OBSOLETE configurations
+
+Gould PowerNode, NP1				np1-*-*, pn-*-*
+
+Configurations that have been declared obsolete will be commented out,
+but the code will be left in place.  If there is no activity to revive
+these configurations before the next release of GDB, the sources will
+be permanently REMOVED.
+
+* ANSI/ISO C
+
+As a compatibility experiment, GDB's source files buildsym.h and
+buildsym.c have been converted to pure standard C, no longer
+containing any K&R compatibility code.  We believe that all systems in
+use today either come with a standard C compiler, or have a GCC port
+available.  If this is not true, please report the affected
+configuration to bug-gdb@gnu.org immediately.  See the README file for
+information about getting a standard C compiler if you don't have one
+already.
+
+* Readline 2.2
+
+GDB now uses readline 2.2.
+
+* set extension-language
+
+You can now control the mapping between filename extensions and source
+languages by using the `set extension-language' command.  For instance,
+you can ask GDB to treat .c files as C++ by saying
+	set extension-language .c c++
+The command `info extensions' lists all of the recognized extensions
+and their associated languages.
+
+* Setting processor type for PowerPC and RS/6000
+
+When GDB is configured for a powerpc*-*-* or an rs6000*-*-* target,
+you can use the `set processor' command to specify what variant of the
+PowerPC family you are debugging.  The command
+
+	set processor NAME
+
+sets the PowerPC/RS6000 variant to NAME.  GDB knows about the
+following PowerPC and RS6000 variants:
+
+  ppc-uisa  PowerPC UISA - a PPC processor as viewed by user-level code
+  rs6000    IBM RS6000 ("POWER") architecture, user-level view
+  403       IBM PowerPC 403
+  403GC     IBM PowerPC 403GC
+  505       Motorola PowerPC 505
+  860       Motorola PowerPC 860 or 850
+  601       Motorola PowerPC 601
+  602       Motorola PowerPC 602
+  603       Motorola/IBM PowerPC 603 or 603e
+  604       Motorola PowerPC 604 or 604e
+  750       Motorola/IBM PowerPC 750 or 750
+
+At the moment, this command just tells GDB what to name the
+special-purpose processor registers.  Since almost all the affected
+registers are inaccessible to user-level programs, this command is
+only useful for remote debugging in its present form.
+
+* HP-UX support
+
+Thanks to a major code donation from Hewlett-Packard, GDB now has much
+more extensive support for HP-UX.  Added features include shared
+library support, kernel threads and hardware watchpoints for 11.00,
+support for HP's ANSI C and C++ compilers, and a compatibility mode
+for xdb and dbx commands.
+
+* Catchpoints
+
+HP's donation includes the new concept of catchpoints, which is a
+generalization of the old catch command.  On HP-UX, it is now possible
+to catch exec, fork, and vfork, as well as library loading.
+
+This means that the existing catch command has changed; its first
+argument now specifies the type of catch to be set up.  See the
+output of "help catch" for a list of catchpoint types.
+
+* Debugging across forks
+
+On HP-UX, you can choose which process to debug when a fork() happens
+in the inferior.
+
+* TUI
+
+HP has donated a curses-based terminal user interface (TUI).  To get
+it, build with --enable-tui.  Although this can be enabled for any
+configuration, at present it only works for native HP debugging.
+
+* GDB remote protocol additions
+
+A new protocol packet 'X' that writes binary data is now available.
+Default behavior is to try 'X', then drop back to 'M' if the stub
+fails to respond.  The settable variable `remotebinarydownload'
+allows explicit control over the use of 'X'.
+
+For 64-bit targets, the memory packets ('M' and 'm') can now contain a
+full 64-bit address.  The command
+
+	set remoteaddresssize 32
+
+can be used to revert to the old behaviour.  For existing remote stubs
+the change should not be noticed, as the additional address information
+will be discarded.
+
+In order to assist in debugging stubs, you may use the maintenance
+command `packet' to send any text string to the stub.  For instance,
+
+	maint packet heythere
+
+sends the packet "$heythere#<checksum>".  Note that it is very easy to
+disrupt a debugging session by sending the wrong packet at the wrong
+time.
+
+The compare-sections command allows you to compare section data on the
+target to what is in the executable file without uploading or
+downloading, by comparing CRC checksums.
+
+* Tracing can collect general expressions
+
+You may now collect general expressions at tracepoints.  This requires
+further additions to the target-side stub; see tracepoint.c and
+doc/agentexpr.texi for further details.
+
+* mask-address variable for Mips
+
+For Mips targets, you may control the zeroing of the upper 32 bits of
+a 64-bit address by entering `set mask-address on'.  This is mainly
+of interest to users of embedded R4xxx and R5xxx processors.
+
+* Higher serial baud rates
+
+GDB's serial code now allows you to specify baud rates 57600, 115200,
+230400, and 460800 baud.  (Note that your host system may not be able
+to achieve all of these rates.)
+
+* i960 simulator
+
+The i960 configuration now includes an initial implementation of a
+builtin simulator, contributed by Jim Wilson.
+
+
+*** Changes in GDB-4.17:
+
+* New native configurations
+
+Alpha GNU/Linux					alpha*-*-linux*
+Unixware 2.x					i[3456]86-unixware2*
+Irix 6.x					mips*-sgi-irix6*
+PowerPC GNU/Linux				powerpc-*-linux*
+PowerPC Solaris					powerpcle-*-solaris*
+Sparc GNU/Linux					sparc-*-linux*
+Motorola sysV68 R3V7.1				m68k-motorola-sysv
+
+* New targets
+
+Argonaut Risc Chip (ARC)			arc-*-*
+Hitachi H8/300S					h8300*-*-*
+Matsushita MN10200 w/simulator			mn10200-*-*
+Matsushita MN10300 w/simulator			mn10300-*-*
+MIPS NEC VR4100					mips64*vr4100*{,el}-*-elf*
+MIPS NEC VR5000					mips64*vr5000*{,el}-*-elf*
+MIPS Toshiba TX39				mips64*tx39*{,el}-*-elf*
+Mitsubishi D10V w/simulator			d10v-*-*
+Mitsubishi M32R/D w/simulator			m32r-*-elf*
+Tsqware Sparclet				sparclet-*-*
+NEC V850 w/simulator				v850-*-*
+
+* New debugging protocols
+
+ARM with RDI protocol				arm*-*-*
+M68K with dBUG monitor				m68*-*-{aout,coff,elf}
+DDB and LSI variants of PMON protocol		mips*-*-*
+PowerPC with DINK32 monitor			powerpc{,le}-*-eabi
+PowerPC with SDS protocol			powerpc{,le}-*-eabi
+Macraigor OCD (Wiggler) devices			powerpc{,le}-*-eabi
+
+* DWARF 2
+
+All configurations can now understand and use the DWARF 2 debugging
+format.  The choice is automatic, if the symbol file contains DWARF 2
+information.
+
+* Java frontend
+
+GDB now includes basic Java language support.  This support is
+only useful with Java compilers that produce native machine code.
+
+* solib-absolute-prefix and solib-search-path
+
+For SunOS and SVR4 shared libraries, you may now set the prefix for
+loading absolute shared library symbol files, and the search path for
+locating non-absolute shared library symbol files.
+
+* Live range splitting
+
+GDB can now effectively debug code for which GCC has performed live
+range splitting as part of its optimization.  See gdb/doc/LRS for
+more details on the expected format of the stabs information.
+
+* Hurd support
+
+GDB's support for the GNU Hurd, including thread debugging, has been
+updated to work with current versions of the Hurd.
+
+* ARM Thumb support
+
+GDB's ARM target configuration now handles the ARM7T (Thumb) 16-bit
+instruction set.  ARM GDB automatically detects when Thumb
+instructions are in use, and adjusts disassembly and backtracing
+accordingly.
+
+* MIPS16 support
+
+GDB's MIPS target configurations now handle the MIP16 16-bit
+instruction set.
+
+* Overlay support
+
+GDB now includes support for overlays; if an executable has been
+linked such that multiple sections are based at the same address, GDB
+will decide which section to use for symbolic info.  You can choose to
+control the decision manually, using overlay commands, or implement
+additional target-side support and use "overlay load-target" to bring
+in the overlay mapping.  Do "help overlay" for more detail.
+
+* info symbol
+
+The command "info symbol <address>" displays information about
+the symbol at the specified address.
+
+* Trace support
+
+The standard remote protocol now includes an extension that allows
+asynchronous collection and display of trace data.  This requires
+extensive support in the target-side debugging stub.  Tracing mode
+includes a new interaction mode in GDB and new commands: see the
+file tracepoint.c for more details.
+
+* MIPS simulator
+
+Configurations for embedded MIPS now include a simulator contributed
+by Cygnus Solutions.  The simulator supports the instruction sets
+of most MIPS variants.
+
+* Sparc simulator
+
+Sparc configurations may now include the ERC32 simulator contributed
+by the European Space Agency.  The simulator is not built into
+Sparc targets by default; configure with --enable-sim to include it.
+
+* set architecture
+
+For target configurations that may include multiple variants of a
+basic architecture (such as MIPS and SH), you may now set the
+architecture explicitly.  "set arch" sets, "info arch" lists
+the possible architectures.
+
+*** Changes in GDB-4.16:
+
+* New native configurations
+
+Windows 95, x86 Windows NT			i[345]86-*-cygwin32
+M68K NetBSD					m68k-*-netbsd*
+PowerPC AIX 4.x					powerpc-*-aix*
+PowerPC MacOS					powerpc-*-macos*
+PowerPC Windows NT				powerpcle-*-cygwin32
+RS/6000 AIX 4.x					rs6000-*-aix4*
+
+* New targets
+
+ARM with RDP protocol				arm-*-*
+I960 with MON960				i960-*-coff
+MIPS VxWorks					mips*-*-vxworks*
+MIPS VR4300 with PMON				mips64*vr4300{,el}-*-elf*
+PowerPC with PPCBUG monitor			powerpc{,le}-*-eabi*
+Hitachi SH3					sh-*-*
+Matra Sparclet					sparclet-*-*
+
+* PowerPC simulator
+
+The powerpc-eabi configuration now includes the PSIM simulator,
+contributed by Andrew Cagney, with assistance from Mike Meissner.
+PSIM is a very elaborate model of the PowerPC, including not only
+basic instruction set execution, but also details of execution unit
+performance and I/O hardware.  See sim/ppc/README for more details.
+
+* Solaris 2.5
+
+GDB now works with Solaris 2.5.
+
+* Windows 95/NT native
+
+GDB will now work as a native debugger on Windows 95 and Windows NT.
+To build it from source, you must use the "gnu-win32" environment,
+which uses a DLL to emulate enough of Unix to run the GNU tools.
+Further information, binaries, and sources are available at
+ftp.cygnus.com, under pub/gnu-win32.
+
+* dont-repeat command
+
+If a user-defined command includes the command `dont-repeat', then the
+command will not be repeated if the user just types return.  This is
+useful if the command is time-consuming to run, so that accidental
+extra keystrokes don't run the same command many times.
+
+* Send break instead of ^C
+
+The standard remote protocol now includes an option to send a break
+rather than a ^C to the target in order to interrupt it.  By default,
+GDB will send ^C; to send a break, set the variable `remotebreak' to 1.
+
+* Remote protocol timeout
+
+The standard remote protocol includes a new variable `remotetimeout'
+that allows you to set the number of seconds before GDB gives up trying
+to read from the target.  The default value is 2.
+
+* Automatic tracking of dynamic object loading (HPUX and Solaris only)
+
+By default GDB will automatically keep track of objects as they are
+loaded and unloaded by the dynamic linker.  By using the command `set
+stop-on-solib-events 1' you can arrange for GDB to stop the inferior
+when shared library events occur, thus allowing you to set breakpoints
+in shared libraries which are explicitly loaded by the inferior.
+
+Note this feature does not work on hpux8.  On hpux9 you must link
+/usr/lib/end.o into your program.  This feature should work
+automatically on hpux10.
+
+* Irix 5.x hardware watchpoint support
+
+Irix 5 configurations now support the use of hardware watchpoints.
+
+* Mips protocol "SYN garbage limit"
+
+When debugging a Mips target using the `target mips' protocol, you
+may set the number of characters that GDB will ignore by setting
+the `syn-garbage-limit'.  A value of -1 means that GDB will ignore
+every character.  The default value is 1050.
+
+* Recording and replaying remote debug sessions
+
+If you set `remotelogfile' to the name of a file, gdb will write to it
+a recording of a remote debug session.  This recording may then be
+replayed back to gdb using "gdbreplay".  See gdbserver/README for
+details.  This is useful when you have a problem with GDB while doing
+remote debugging; you can make a recording of the session and send it
+to someone else, who can then recreate the problem.
+
+* Speedups for remote debugging
+
+GDB includes speedups for downloading and stepping MIPS systems using
+the IDT monitor, fast downloads to the Hitachi SH E7000 emulator,
+and more efficient S-record downloading.
+
+* Memory use reductions and statistics collection
+
+GDB now uses less memory and reports statistics about memory usage.
+Try the `maint print statistics' command, for example.
+
+*** Changes in GDB-4.15:
+
+* Psymtabs for XCOFF
+
+The symbol reader for AIX GDB now uses partial symbol tables.  This
+can greatly improve startup time, especially for large executables.
+
+* Remote targets use caching
+
+Remote targets now use a data cache to speed up communication with the
+remote side.  The data cache could lead to incorrect results because
+it doesn't know about volatile variables, thus making it impossible to
+debug targets which use memory mapped I/O devices. `set remotecache
+off' turns the the data cache off.
+
+* Remote targets may have threads
+
+The standard remote protocol now includes support for multiple threads
+in the target system, using new protocol commands 'H' and 'T'.  See
+gdb/remote.c for details.
+
+* NetROM support
+
+If GDB is configured with `--enable-netrom', then it will include
+support for the NetROM ROM emulator from XLNT Designs.  The NetROM
+acts as though it is a bank of ROM on the target board, but you can
+write into it over the network.  GDB's support consists only of
+support for fast loading into the emulated ROM; to debug, you must use
+another protocol, such as standard remote protocol.  The usual
+sequence is something like
+
+	target nrom <netrom-hostname>
+	load <prog>
+	target remote <netrom-hostname>:1235
+
+* Macintosh host
+
+GDB now includes support for the Apple Macintosh, as a host only.  It
+may be run as either an MPW tool or as a standalone application, and
+it can debug through the serial port.  All the usual GDB commands are
+available, but to the target command, you must supply "serial" as the
+device type instead of "/dev/ttyXX".  See mpw-README in the main
+directory for more information on how to build.  The MPW configuration
+scripts */mpw-config.in support only a few targets, and only the
+mips-idt-ecoff target has been tested.
+
+* Autoconf
+
+GDB configuration now uses autoconf.  This is not user-visible,
+but does simplify configuration and building.
+
+* hpux10
+
+GDB now supports hpux10.
+
+*** Changes in GDB-4.14:
+
+* New native configurations
+
+x86 FreeBSD					i[345]86-*-freebsd
+x86 NetBSD					i[345]86-*-netbsd
+NS32k NetBSD					ns32k-*-netbsd
+Sparc NetBSD					sparc-*-netbsd
+
+* New targets
+
+A29K VxWorks					a29k-*-vxworks
+HP PA PRO embedded (WinBond W89K & Oki OP50N)	hppa*-*-pro*
+CPU32 EST-300 emulator				m68*-*-est*
+PowerPC ELF					powerpc-*-elf
+WDC 65816					w65-*-*
+
+* Alpha OSF/1 support for procfs
+
+GDB now supports procfs under OSF/1-2.x and higher, which makes it
+possible to attach to running processes.  As the mounting of the /proc
+filesystem is optional on the Alpha, GDB automatically determines
+the availability of /proc during startup.  This can lead to problems
+if /proc is unmounted after GDB has been started.
+
+* Arguments to user-defined commands
+
+User commands may accept up to 10 arguments separated by whitespace.
+Arguments are accessed within the user command via $arg0..$arg9.  A
+trivial example:
+define adder
+  print $arg0 + $arg1 + $arg2
+
+To execute the command use:
+adder 1 2 3
+
+Defines the command "adder" which prints the sum of its three arguments.
+Note the arguments are text substitutions, so they may reference variables,
+use complex expressions, or even perform inferior function calls.
+
+* New `if' and `while' commands
+
+This makes it possible to write more sophisticated user-defined
+commands.  Both commands take a single argument, which is the
+expression to evaluate, and must be followed by the commands to
+execute, one per line, if the expression is nonzero, the list being
+terminated by the word `end'.  The `if' command list may include an
+`else' word, which causes the following commands to be executed only
+if the expression is zero.
+
+* Fortran source language mode
+
+GDB now includes partial support for Fortran 77.  It will recognize
+Fortran programs and can evaluate a subset of Fortran expressions, but
+variables and functions may not be handled correctly.  GDB will work
+with G77, but does not yet know much about symbols emitted by other
+Fortran compilers.
+
+* Better HPUX support
+
+Most debugging facilities now work on dynamic executables for HPPAs
+running hpux9 or later.  You can attach to running dynamically linked
+processes, but by default the dynamic libraries will be read-only, so
+for instance you won't be able to put breakpoints in them.  To change
+that behavior do the following before running the program:
+
+	adb -w a.out
+	__dld_flags?W 0x5
+	control-d
+
+This will cause the libraries to be mapped private and read-write.
+To revert to the normal behavior, do this:
+
+	adb -w a.out
+	__dld_flags?W 0x4
+	control-d
+
+You cannot set breakpoints or examine data in the library until after
+the library is loaded if the function/data symbols do not have
+external linkage.
+
+GDB can now also read debug symbols produced by the HP C compiler on
+HPPAs (sorry, no C++, Fortran or 68k support).
+
+* Target byte order now dynamically selectable
+
+You can choose which byte order to use with a target system, via the
+commands "set endian big" and "set endian little", and you can see the
+current setting by using "show endian".  You can also give the command
+"set endian auto", in which case GDB will use the byte order
+associated with the executable.  Currently, only embedded MIPS
+configurations support dynamic selection of target byte order.
+
+* New DOS host serial code
+
+This version uses DPMI interrupts to handle buffered I/O, so you
+no longer need to run asynctsr when debugging boards connected to
+a PC's serial port.
+
+*** Changes in GDB-4.13:
+
+* New "complete" command
+
+This lists all the possible completions for the rest of the line, if it
+were to be given as a command itself.  This is intended for use by emacs.
+
+* Trailing space optional in prompt
+
+"set prompt" no longer adds a space for you after the prompt you set.  This
+allows you to set a prompt which ends in a space or one that does not.
+
+* Breakpoint hit counts
+
+"info break" now displays a count of the number of times the breakpoint
+has been hit.  This is especially useful in conjunction with "ignore"; you
+can ignore a large number of breakpoint hits, look at the breakpoint info
+to see how many times the breakpoint was hit, then run again, ignoring one
+less than that number, and this will get you quickly to the last hit of
+that breakpoint.
+
+* Ability to stop printing at NULL character
+
+"set print null-stop" will cause GDB to stop printing the characters of
+an array when the first NULL is encountered.  This is useful when large
+arrays actually contain only short strings.
+
+* Shared library breakpoints
+
+In SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can now set
+breakpoints in shared libraries before the executable is run.
+
+* Hardware watchpoints
+
+There is a new hardware breakpoint for the watch command for sparclite
+targets.  See gdb/sparclite/hw_breakpoint.note.
+
+Hardware watchpoints are also now supported under Linux.
+ 
+* Annotations
+
+Annotations have been added.  These are for use with graphical interfaces,
+and are still experimental.  Currently only gdba.el uses these.
+
+* Improved Irix 5 support
+
+GDB now works properly with Irix 5.2.
+
+* Improved HPPA support
+
+GDB now works properly with the latest GCC and GAS.
+
+* New native configurations
+
+Sequent PTX4				i[34]86-sequent-ptx4
+HPPA running OSF/1			hppa*-*-osf*
+Atari TT running SVR4			m68*-*-sysv4*
+RS/6000 LynxOS				rs6000-*-lynxos*
+
+* New targets
+
+OS/9000					i[34]86-*-os9k
+MIPS R4000				mips64*{,el}-*-{ecoff,elf}
+Sparc64					sparc64-*-*
+
+* Hitachi SH7000 and E7000-PC ICE support
+
+There is now support for communicating with the Hitachi E7000-PC ICE.
+This is available automatically when GDB is configured for the SH.
+
+* Fixes
+
+As usual, a variety of small fixes and improvements, both generic
+and configuration-specific.  See the ChangeLog for more detail.
+
+*** Changes in GDB-4.12:
+
+* Irix 5 is now supported
+
+* HPPA support
+
+GDB-4.12 on the HPPA has a number of changes which make it unable
+to debug the output from the currently released versions of GCC and
+GAS (GCC 2.5.8 and GAS-2.2 or PAGAS-1.36).  Until the next major release
+of GCC and GAS, versions of these tools designed to work with GDB-4.12
+can be retrieved via anonymous ftp from jaguar.cs.utah.edu:/dist.
+
+
+*** Changes in GDB-4.11:
+
+* User visible changes:
+
+* Remote Debugging
+
+The "set remotedebug" option is now consistent between the mips remote
+target, remote targets using the gdb-specific protocol, UDI (AMD's
+debug protocol for the 29k) and the 88k bug monitor.  It is now an
+integer specifying a debug level (normally 0 or 1, but 2 means more
+debugging info for the mips target).
+
+* DEC Alpha native support
+
+GDB now works on the DEC Alpha.  GCC 2.4.5 does not produce usable
+debug info, but GDB works fairly well with the DEC compiler and should
+work with a future GCC release.  See the README file for a few
+Alpha-specific notes.
+
+* Preliminary thread implementation
+
+GDB now has preliminary thread support for both SGI/Irix and LynxOS.
+
+* LynxOS native and target support for 386
+
+This release has been hosted on LynxOS 2.2, and also can be configured
+to remotely debug programs running under LynxOS (see gdb/gdbserver/README
+for details).
+
+* Improvements in C++ mangling/demangling.
+
+This release has much better g++ debugging, specifically in name 
+mangling/demangling, virtual function calls, print virtual table,
+call methods, ...etc.
+
+*** Changes in GDB-4.10:
+
+ * User visible changes:
+
+Remote debugging using the GDB-specific (`target remote') protocol now
+supports the `load' command.  This is only useful if you have some
+other way of getting the stub to the target system, and you can put it
+somewhere in memory where it won't get clobbered by the download.
+
+Filename completion now works.
+
+When run under emacs mode, the "info line" command now causes the
+arrow to point to the line specified.  Also, "info line" prints
+addresses in symbolic form (as well as hex).
+
+All vxworks based targets now support a user settable option, called
+vxworks-timeout.  This option represents the number of seconds gdb
+should wait for responses to rpc's.  You might want to use this if
+your vxworks target is, perhaps, a slow software simulator or happens
+to be on the far side of a thin network line.
+
+ * DEC alpha support
+
+This release contains support for using a DEC alpha as a GDB host for
+cross debugging.  Native alpha debugging is not supported yet.
+
+
+*** Changes in GDB-4.9:
+
+ * Testsuite
+
+This is the first GDB release which is accompanied by a matching testsuite.
+The testsuite requires installation of dejagnu, which should be available
+via ftp from most sites that carry GNU software.
+
+ * C++ demangling
+
+'Cfront' style demangling has had its name changed to 'ARM' style, to
+emphasize that it was written from the specifications in the C++ Annotated
+Reference Manual, not necessarily to be compatible with AT&T cfront.  Despite
+disclaimers, it still generated too much confusion with users attempting to
+use gdb with AT&T cfront.
+
+ * Simulators
+
+GDB now uses a standard remote interface to a simulator library.
+So far, the library contains simulators for the Zilog Z8001/2, the
+Hitachi H8/300, H8/500 and Super-H.
+
+ * New targets supported
+
+H8/300 simulator 			h8300-hitachi-hms or h8300hms
+H8/500 simulator 			h8500-hitachi-hms or h8500hms
+SH simulator				sh-hitachi-hms    or sh
+Z8000 simulator		  		z8k-zilog-none 	  or z8ksim
+IDT MIPS board over serial line		mips-idt-ecoff
+
+Cross-debugging to GO32 targets is supported.  It requires a custom
+version of the i386-stub.c module which is integrated with the 
+GO32 memory extender.
+
+ * New remote protocols
+
+MIPS remote debugging protocol.
+
+ * New source languages supported
+
+This version includes preliminary support for Chill, a Pascal like language
+used by telecommunications companies.  Chill support is also being integrated
+into the GNU compiler, but we don't know when it will be publically available.
+
+
+*** Changes in GDB-4.8:
+
+ * HP Precision Architecture supported
+
+GDB now supports HP PA-RISC machines running HPUX.  A preliminary
+version of this support was available as a set of patches from the
+University of Utah.  GDB does not support debugging of programs
+compiled with the HP compiler, because HP will not document their file
+format.  Instead, you must use GCC (version 2.3.2 or later) and PA-GAS
+(as available from jaguar.cs.utah.edu:/dist/pa-gas.u4.tar.Z).
+
+Many problems in the preliminary version have been fixed.
+
+ * Faster and better demangling
+
+We have improved template demangling and fixed numerous bugs in the GNU style
+demangler.  It can now handle type modifiers such as `static' or `const'.  Wide
+character types (wchar_t) are now supported.  Demangling of each symbol is now
+only done once, and is cached when the symbol table for a file is read in.
+This results in a small increase in memory usage for C programs, a moderate
+increase in memory usage for C++ programs, and a fantastic speedup in
+symbol lookups.
+
+`Cfront' style demangling still doesn't work with AT&T cfront.  It was written
+from the specifications in the Annotated Reference Manual, which AT&T's
+compiler does not actually implement.
+
+ * G++ multiple inheritance compiler problem
+
+In the 2.3.2 release of gcc/g++, how the compiler resolves multiple
+inheritance lattices was reworked to properly discover ambiguities.  We
+recently found an example which causes this new algorithm to fail in a
+very subtle way, producing bad debug information for those classes.
+The file 'gcc.patch' (in this directory) can be applied to gcc to
+circumvent the problem.  A future GCC release will contain a complete
+fix.
+
+The previous G++ debug info problem (mentioned below for the gdb-4.7
+release) is fixed in gcc version 2.3.2.
+
+ * Improved configure script
+
+The `configure' script will now attempt to guess your system type if
+you don't supply a host system type.  The old scheme of supplying a
+host system triplet is preferable over using this.  All the magic is
+done in the new `config.guess' script.  Examine it for details.
+
+We have also brought our configure script much more in line with the FSF's
+version.  It now supports the --with-xxx options.  In particular,
+`--with-minimal-bfd' can be used to make the GDB binary image smaller.
+The resulting GDB will not be able to read arbitrary object file formats --
+only the format ``expected'' to be used on the configured target system.
+We hope to make this the default in a future release.
+
+ * Documentation improvements
+
+There's new internal documentation on how to modify GDB, and how to
+produce clean changes to the code.  We implore people to read it
+before submitting changes.
+
+The GDB manual uses new, sexy Texinfo conditionals, rather than arcane
+M4 macros.  The new texinfo.tex is provided in this release.  Pre-built
+`info' files are also provided.  To build `info' files from scratch,
+you will need the latest `makeinfo' release, which will be available in
+a future texinfo-X.Y release.
+
+*NOTE*  The new texinfo.tex can cause old versions of TeX to hang.
+We're not sure exactly which versions have this problem, but it has
+been seen in 3.0.  We highly recommend upgrading to TeX version 3.141
+or better.  If that isn't possible, there is a patch in
+`texinfo/tex3patch' that will modify `texinfo/texinfo.tex' to work
+around this problem.
+
+ * New features
+
+GDB now supports array constants that can be used in expressions typed in by
+the user.  The syntax is `{element, element, ...}'.  Ie: you can now type
+`print {1, 2, 3}', and it will build up an array in memory malloc'd in
+the target program.
+
+The new directory `gdb/sparclite' contains a program that demonstrates
+how the sparc-stub.c remote stub runs on a Fujitsu SPARClite processor.
+
+ * New native hosts supported
+
+HP/PA-RISC under HPUX using GNU tools	hppa1.1-hp-hpux
+386 CPUs running SCO Unix 3.2v4		i386-unknown-sco3.2v4
+
+ * New targets supported
+
+AMD 29k family via UDI			a29k-amd-udi  or  udi29k
+
+ * New file formats supported
+
+BFD now supports reading HP/PA-RISC executables (SOM file format?),
+HPUX core files, and SCO 3.2v2 core files.
+
+ * Major bug fixes
+
+Attaching to processes now works again; thanks for the many bug reports.
+
+We have also stomped on a bunch of core dumps caused by
+printf_filtered("%s") problems.
+
+We eliminated a copyright problem on the rpc and ptrace header files
+for VxWorks, which was discovered at the last minute during the 4.7
+release.  You should now be able to build a VxWorks GDB.
+
+You can now interrupt gdb while an attached process is running.  This
+will cause the attached process to stop, and give control back to GDB.
+
+We fixed problems caused by using too many file descriptors
+for reading symbols from object files and libraries.  This was
+especially a problem for programs that used many (~100) shared
+libraries.
+
+The `step' command now only enters a subroutine if there is line number
+information for the subroutine.  Otherwise it acts like the `next'
+command.  Previously, `step' would enter subroutines if there was
+any debugging information about the routine.  This avoids problems
+when using `cc -g1' on MIPS machines.
+
+ * Internal improvements
+
+GDB's internal interfaces have been improved to make it easier to support
+debugging of multiple languages in the future.
+
+GDB now uses a common structure for symbol information internally.
+Minimal symbols (derived from linkage symbols in object files), partial
+symbols (from a quick scan of debug information), and full symbols
+contain a common subset of information, making it easier to write
+shared code that handles any of them.
+
+ * New command line options
+
+We now accept --silent as an alias for --quiet.
+
+ * Mmalloc licensing
+
+The memory-mapped-malloc library is now licensed under the GNU Library
+General Public License.
+
+*** Changes in GDB-4.7:
+
+ * Host/native/target split
+
+GDB has had some major internal surgery to untangle the support for
+hosts and remote targets.  Now, when you configure GDB for a remote
+target, it will no longer load in all of the support for debugging
+local programs on the host.  When fully completed and tested, this will
+ensure that arbitrary host/target combinations are possible.
+
+The primary conceptual shift is to separate the non-portable code in
+GDB into three categories.  Host specific code is required any time GDB
+is compiled on that host, regardless of the target.  Target specific
+code relates to the peculiarities of the target, but can be compiled on
+any host.  Native specific code is everything else:  it can only be
+built when the host and target are the same system.  Child process
+handling and core file support are two common `native' examples.
+
+GDB's use of /proc for controlling Unix child processes is now cleaner.
+It has been split out into a single module under the `target_ops' vector,
+plus two native-dependent functions for each system that uses /proc.
+
+ * New hosts supported
+
+HP/Apollo 68k (under the BSD domain)	m68k-apollo-bsd  or  apollo68bsd
+386 CPUs running various BSD ports	i386-unknown-bsd  or  386bsd
+386 CPUs running SCO Unix		i386-unknown-scosysv322  or  i386sco
+
+ * New targets supported
+
+Fujitsu SPARClite 			sparclite-fujitsu-none  or  sparclite
+68030 and CPU32				m68030-*-*, m68332-*-*
+
+ * New native hosts supported
+
+386 CPUs running various BSD ports	i386-unknown-bsd  or  386bsd
+    (386bsd is not well tested yet)
+386 CPUs running SCO Unix		i386-unknown-scosysv322  or  sco
+
+ * New file formats supported
+
+BFD now supports COFF files for the Zilog Z8000 microprocessor.  It
+supports reading of `a.out.adobe' object files, which are an a.out
+format extended with minimal information about multiple sections.
+
+ * New commands
+
+`show copying' is the same as the old `info copying'.
+`show warranty' is the same as `info warrantee'.
+These were renamed for consistency.  The old commands continue to work.
+
+`info handle' is a new alias for `info signals'.
+
+You can now define pre-command hooks, which attach arbitrary command
+scripts to any command.  The commands in the hook will be executed
+prior to the user's command.  You can also create a hook which will be
+executed whenever the program stops.  See gdb.texinfo.
+
+ * C++ improvements
+
+We now deal with Cfront style name mangling, and can even extract type
+info from mangled symbols.  GDB can automatically figure out which
+symbol mangling style your C++ compiler uses.
+
+Calling of methods and virtual functions has been improved as well.
+
+ * Major bug fixes
+
+The crash that occured when debugging Sun Ansi-C compiled binaries is
+fixed.  This was due to mishandling of the extra N_SO stabs output
+by the compiler.
+
+We also finally got Ultrix 4.2 running in house, and fixed core file
+support, with help from a dozen people on the net.
+
+John M. Farrell discovered that the reason that single-stepping was so
+slow on all of the Mips based platforms (primarily SGI and DEC) was
+that we were trying to demangle and lookup a symbol used for internal
+purposes on every instruction that was being stepped through.  Changing
+the name of that symbol so that it couldn't be mistaken for a C++
+mangled symbol sped things up a great deal.
+
+Rich Pixley sped up symbol lookups in general by getting much smarter
+about when C++ symbol mangling is necessary.  This should make symbol
+completion (TAB on the command line) much faster.  It's not as fast as
+we'd like, but it's significantly faster than gdb-4.6.
+
+ * AMD 29k support
+
+A new user controllable variable 'call_scratch_address' can
+specify the location of a scratch area to be used when GDB
+calls a function in the target.  This is necessary because the
+usual method of putting the scratch area on the stack does not work
+in systems that have separate instruction and data spaces.
+
+We integrated changes to support the 29k UDI (Universal Debugger
+Interface), but discovered at the last minute that we didn't have all
+of the appropriate copyright paperwork.  We are working with AMD to
+resolve this, and hope to have it available soon.
+
+ * Remote interfaces
+
+We have sped up the remote serial line protocol, especially for targets
+with lots of registers.  It now supports a new `expedited status' ('T')
+message which can be used in place of the existing 'S' status message.
+This allows the remote stub to send only the registers that GDB
+needs to make a quick decision about single-stepping or conditional
+breakpoints, eliminating the need to fetch the entire register set for
+each instruction being stepped through.
+
+The GDB remote serial protocol now implements a write-through cache for
+registers, only re-reading the registers if the target has run.
+
+There is also a new remote serial stub for SPARC processors.  You can
+find it in gdb-4.7/gdb/sparc-stub.c.  This was written to support the
+Fujitsu SPARClite processor, but will run on any stand-alone SPARC
+processor with a serial port.
+
+ * Configuration
+
+Configure.in files have become much easier to read and modify.  A new
+`table driven' format makes it more obvious what configurations are
+supported, and what files each one uses.
+
+ * Library changes
+
+There is a new opcodes library which will eventually contain all of the
+disassembly routines and opcode tables.  At present, it only contains
+Sparc and Z8000 routines.  This will allow the assembler, debugger, and
+disassembler (binutils/objdump) to share these routines.
+
+The libiberty library is now copylefted under the GNU Library General
+Public License.  This allows more liberal use, and was done so libg++
+can use it.  This makes no difference to GDB, since the Library License
+grants all the rights from the General Public License.
+
+ * Documentation
+
+The file gdb-4.7/gdb/doc/stabs.texinfo is a (relatively) complete
+reference to the stabs symbol info used by the debugger.  It is (as far
+as we know) the only published document on this fascinating topic.  We
+encourage you to read it, compare it to the stabs information on your
+system, and send improvements on the document in general (to
+bug-gdb@prep.ai.mit.edu).
+
+And, of course, many bugs have been fixed.
+
+
+*** Changes in GDB-4.6:
+
+ * Better support for C++ function names
+
+GDB now accepts as input the "demangled form" of C++ overloaded function
+names and member function names, and can do command completion on such names
+(using TAB, TAB-TAB, and ESC-?).  The names have to be quoted with a pair of
+single quotes.  Examples are 'func (int, long)' and 'obj::operator==(obj&)'.
+Make use of command completion, it is your friend.
+
+GDB also now accepts a variety of C++ mangled symbol formats.  They are
+the GNU g++ style, the Cfront (ARM) style, and the Lucid (lcc) style.
+You can tell GDB which format to use by doing a 'set demangle-style {gnu,
+lucid, cfront, auto}'.  'gnu' is the default.  Do a 'set demangle-style foo'
+for the list of formats.
+
+ * G++ symbol mangling problem
+
+Recent versions of gcc have a bug in how they emit debugging information for
+C++ methods (when using dbx-style stabs).  The file 'gcc.patch' (in this
+directory) can be applied to gcc to fix the problem.  Alternatively, if you
+can't fix gcc, you can #define GCC_MANGLE_BUG when compling gdb/symtab.c. The
+usual symptom is difficulty with setting breakpoints on methods.  GDB complains
+about the method being non-existent.  (We believe that version 2.2.2 of GCC has
+this problem.)
+
+ * New 'maintenance' command
+
+All of the commands related to hacking GDB internals have been moved out of
+the main command set, and now live behind the 'maintenance' command.  This
+can also be abbreviated as 'mt'.  The following changes were made:
+
+	dump-me ->		maintenance dump-me
+	info all-breakpoints ->	maintenance info breakpoints
+	printmsyms ->		maintenance print msyms
+	printobjfiles ->	maintenance print objfiles
+	printpsyms ->		maintenance print psymbols
+	printsyms ->		maintenance print symbols
+
+The following commands are new:
+
+	maintenance demangle	Call internal GDB demangler routine to
+				demangle a C++ link name and prints the result.
+	maintenance print type	Print a type chain for a given symbol
+
+ * Change to .gdbinit file processing
+
+We now read the $HOME/.gdbinit file before processing the argv arguments
+(e.g. reading symbol files or core files).  This allows global parameters to
+be set, which will apply during the symbol reading.  The ./.gdbinit is still
+read after argv processing.
+
+ * New hosts supported
+
+Solaris-2.0 !!!				sparc-sun-solaris2  or  sun4sol2
+
+Linux support				i386-unknown-linux  or  linux
+
+We are also including code to support the HP/PA running BSD and HPUX.  This
+is almost guaranteed not to work, as we didn't have time to test or build it
+for this release.  We are including it so that the more adventurous (or
+masochistic) of you can play with it.  We also had major problems with the
+fact that the compiler that we got from HP doesn't support the -g option.
+It costs extra.
+
+ * New targets supported
+
+Hitachi H8/300				h8300-hitachi-hms  or  h8300hms
+
+ * More smarts about finding #include files
+
+GDB now remembers the compilation directory for all include files, and for
+all files from which C is generated (like yacc and lex sources).  This
+greatly improves GDB's ability to find yacc/lex sources, and include files,
+especially if you are debugging your program from a directory different from
+the one that contains your sources.
+
+We also fixed a bug which caused difficulty with listing and setting
+breakpoints in include files which contain C code.  (In the past, you had to
+try twice in order to list an include file that you hadn't looked at before.)
+
+ * Interesting infernals change
+
+GDB now deals with arbitrary numbers of sections, where the symbols for each
+section must be relocated relative to that section's landing place in the
+target's address space.  This work was needed to support ELF with embedded
+stabs used by Solaris-2.0.
+
+ * Bug fixes (of course!)
+
+There have been loads of fixes for the following things:
+	mips, rs6000, 29k/udi, m68k, g++, type handling, elf/dwarf, m88k,
+	i960, stabs, DOS(GO32), procfs, etc...
+
+See the ChangeLog for details.
+
+*** Changes in GDB-4.5:
+
+ * New machines supported (host and target)
+
+IBM RS6000 running AIX			rs6000-ibm-aix	or rs6000
+
+SGI Irix-4.x				mips-sgi-irix4	or iris4
+
+ * New malloc package
+
+GDB now uses a new memory manager called mmalloc, based on gmalloc.
+Mmalloc is capable of handling mutiple heaps of memory.  It is also
+capable of saving a heap to a file, and then mapping it back in later.
+This can be used to greatly speedup the startup of GDB by using a
+pre-parsed symbol table which lives in a mmalloc managed heap.  For
+more details, please read mmalloc/mmalloc.texi.
+
+ * info proc
+
+The 'info proc' command (SVR4 only) has been enhanced quite a bit.  See
+'help info proc' for details.
+
+ * MIPS ecoff symbol table format
+
+The code that reads MIPS symbol table format is now supported on all hosts.
+Thanks to MIPS for releasing the sym.h and symconst.h files to make this
+possible.
+
+ * File name changes for MS-DOS
+
+Many files in the config directories have been renamed to make it easier to
+support GDB on MS-DOSe systems (which have very restrictive file name
+conventions :-( ).  MS-DOSe host support (under DJ Delorie's GO32
+environment) is close to working but has some remaining problems.  Note
+that debugging of DOS programs is not supported, due to limitations
+in the ``operating system'', but it can be used to host cross-debugging.
+
+ * Cross byte order fixes
+
+Many fixes have been made to support cross debugging of Sparc and MIPS
+targets from hosts whose byte order differs.
+
+ * New -mapped and -readnow options
+
+If memory-mapped files are available on your system through the 'mmap'
+system call, you can use the -mapped option on the `file' or
+`symbol-file' commands to cause GDB to write the symbols from your
+program into a reusable file.  If the program you are debugging is
+called `/path/fred', the mapped symbol file will be `./fred.syms'.
+Future GDB debugging sessions will notice the presence of this file,
+and will quickly map in symbol information from it, rather than reading
+the symbol table from the executable program.  Using the '-mapped'
+option in a GDB `file' or `symbol-file' command has the same effect as
+starting GDB with the '-mapped' command-line option.
+
+You can cause GDB to read the entire symbol table immediately by using
+the '-readnow' option with any of the commands that load symbol table
+information (or on the GDB command line).  This makes the command
+slower, but makes future operations faster.
+
+The -mapped and -readnow options are typically combined in order to
+build a `fred.syms' file that contains complete symbol information.
+A simple GDB invocation to do nothing but build a `.syms' file for future
+use is:
+
+	gdb -batch -nx -mapped -readnow programname
+
+The `.syms' file is specific to the host machine on which GDB is run.
+It holds an exact image of GDB's internal symbol table.  It cannot be
+shared across multiple host platforms.
+
+ * longjmp() handling
+
+GDB is now capable of stepping and nexting over longjmp(), _longjmp(), and
+siglongjmp() without losing control.  This feature has not yet been ported to
+all systems.  It currently works on many 386 platforms, all MIPS-based
+platforms (SGI, DECstation, etc), and Sun3/4.
+
+ * Solaris 2.0
+
+Preliminary work has been put in to support the new Solaris OS from Sun.  At
+this time, it can control and debug processes, but it is not capable of
+reading symbols.
+
+ * Bug fixes
+
+As always, many many bug fixes.  The major areas were with g++, and mipsread.
+People using the MIPS-based platforms should experience fewer mysterious
+crashes and trashed symbol tables.
+
+*** Changes in GDB-4.4:
+
+ * New machines supported (host and target)
+
+SCO Unix on i386 IBM PC clones		i386-sco-sysv	or  i386sco
+	(except core files)
+BSD Reno on Vax				vax-dec-bsd
+Ultrix on Vax				vax-dec-ultrix
+
+ * New machines supported (target)
+
+AMD 29000 embedded, using EBMON		a29k-none-none
+
+ * C++ support
+
+GDB continues to improve its handling of C++.  `References' work better.
+The demangler has also been improved, and now deals with symbols mangled as
+per the Annotated C++ Reference Guide.
+
+GDB also now handles `stabs' symbol information embedded in MIPS
+`ecoff' symbol tables.  Since the ecoff format was not easily
+extensible to handle new languages such as C++, this appeared to be a
+good way to put C++ debugging info into MIPS binaries.  This option
+will be supported in the GNU C compiler, version 2, when it is
+released.
+
+ * New features for SVR4
+
+GDB now handles SVR4 shared libraries, in the same fashion as SunOS
+shared libraries.  Debugging dynamically linked programs should present
+only minor differences from debugging statically linked programs.
+
+The `info proc' command will print out information about any process
+on an SVR4 system (including the one you are debugging).  At the moment,
+it prints the address mappings of the process.
+
+If you bring up GDB on another SVR4 system, please send mail to
+bug-gdb@prep.ai.mit.edu to let us know what changes were reqired (if any).
+
+ * Better dynamic linking support in SunOS
+
+Reading symbols from shared libraries which contain debugging symbols
+now works properly.  However, there remain issues such as automatic
+skipping of `transfer vector' code during function calls, which
+make it harder to debug code in a shared library, than to debug the
+same code linked statically.
+
+ * New Getopt
+
+GDB is now using the latest `getopt' routines from the FSF.  This
+version accepts the -- prefix for options with long names.  GDB will
+continue to accept the old forms (-option and +option) as well.
+Various single letter abbreviations for options have been explicity
+added to the option table so that they won't get overshadowed in the
+future by other options that begin with the same letter.
+
+ * Bugs fixed
+
+The `cleanup_undefined_types' bug that many of you noticed has been squashed.
+Many assorted bugs have been handled.  Many more remain to be handled.
+See the various ChangeLog files (primarily in gdb and bfd) for details.
+
+
+*** Changes in GDB-4.3:
+
+ * New machines supported (host and target)
+
+Amiga 3000 running Amix			m68k-cbm-svr4	or  amix
+NCR 3000 386 running SVR4		i386-ncr-svr4	or  ncr3000
+Motorola Delta 88000 running Sys V	m88k-motorola-sysv  or  delta88
+
+ * Almost SCO Unix support
+
+We had hoped to support:
+SCO Unix on i386 IBM PC clones		i386-sco-sysv	or  i386sco
+(except for core file support), but we discovered very late in the release
+that it has problems with process groups that render gdb unusable.  Sorry
+about that.  I encourage people to fix it and post the fixes.
+
+ * Preliminary ELF and DWARF support
+
+GDB can read ELF object files on System V Release 4, and can handle
+debugging records for C, in DWARF format, in ELF files.  This support
+is preliminary.  If you bring up GDB on another SVR4 system, please
+send mail to bug-gdb@prep.ai.mit.edu to let us know what changes were
+reqired (if any).
+
+ * New Readline
+
+GDB now uses the latest `readline' library.  One user-visible change
+is that two tabs will list possible command completions, which previously
+required typing M-? (meta-question mark, or ESC ?).
+
+ * Bugs fixed
+
+The `stepi' bug that many of you noticed has been squashed.
+Many bugs in C++ have been handled.  Many more remain to be handled.
+See the various ChangeLog files (primarily in gdb and bfd) for details.
+
+ * State of the MIPS world (in case you wondered):
+
+GDB can understand the symbol tables emitted by the compilers
+supplied by most vendors of MIPS-based machines, including DEC.  These
+symbol tables are in a format that essentially nobody else uses.
+
+Some versions of gcc come with an assembler post-processor called
+mips-tfile.  This program is required if you want to do source-level
+debugging of gcc-compiled programs.  I believe FSF does not ship
+mips-tfile with gcc version 1, but it will eventually come with gcc
+version 2.
+
+Debugging of g++ output remains a problem.  g++ version 1.xx does not
+really support it at all.  (If you're lucky, you should be able to get
+line numbers and stack traces to work, but no parameters or local
+variables.)  With some work it should be possible to improve the
+situation somewhat.
+
+When gcc version 2 is released, you will have somewhat better luck.
+However, even then you will get confusing results for inheritance and
+methods.
+
+We will eventually provide full debugging of g++ output on
+DECstations.  This will probably involve some kind of stabs-in-ecoff
+encapulation, but the details have not been worked out yet.
+
+
+*** Changes in GDB-4.2:
+
+ *  Improved configuration
+
+Only one copy of `configure' exists now, and it is not self-modifying.
+Porting BFD is simpler.  
+
+ *  Stepping improved
+
+The `step' and `next' commands now only stop at the first instruction
+of a source line.  This prevents the multiple stops that used to occur
+in switch statements, for-loops, etc.  `Step' continues to stop if a
+function that has debugging information is called within the line.
+
+ *  Bug fixing
+
+Lots of small bugs fixed.  More remain.
+
+ *  New host supported (not target)
+
+Intel 386 PC clone running Mach		i386-none-mach
+
+
+*** Changes in GDB-4.1:
+
+ *  Multiple source language support
+
+GDB now has internal scaffolding to handle several source languages.
+It determines the type of each source file from its filename extension,
+and will switch expression parsing and number formatting to match the
+language of the function in the currently selected stack frame.
+You can also specifically set the language to be used, with
+`set language c' or `set language modula-2'.
+
+ *  GDB and Modula-2
+
+GDB now has preliminary support for the GNU Modula-2 compiler,
+currently under development at the State University of New York at
+Buffalo.  Development of both GDB and the GNU Modula-2 compiler will
+continue through the fall of 1991 and into 1992.
+
+Other Modula-2 compilers are currently not supported, and attempting to
+debug programs compiled with them will likely result in an error as the
+symbol table is read.  Feel free to work on it, though!
+
+There are hooks in GDB for strict type checking and range checking,
+in the `Modula-2 philosophy', but they do not currently work.
+
+ * set write on/off
+
+GDB can now write to executable and core files (e.g. patch
+a variable's value).   You must turn this switch on, specify
+the file ("exec foo" or "core foo"), *then* modify it, e.g.
+by assigning a new value to a variable.  Modifications take
+effect immediately.
+
+ * Automatic SunOS shared library reading
+
+When you run your program, GDB automatically determines where its
+shared libraries (if any) have been loaded, and reads their symbols.
+The `share' command is no longer needed.  This also works when
+examining core files.
+
+ * set listsize
+
+You can specify the number of lines that the `list' command shows.
+The default is 10.
+
+ * New machines supported (host and target)
+
+SGI Iris (MIPS) running Irix V3:  	mips-sgi-irix   or  iris
+Sony NEWS (68K) running NEWSOS 3.x:	m68k-sony-sysv	or  news
+Ultracomputer (29K) running Sym1:	a29k-nyu-sym1	or  ultra3
+
+ * New hosts supported (not targets)
+
+IBM RT/PC:				romp-ibm-aix 	or  rtpc
+
+ * New targets supported (not hosts)
+
+AMD 29000 embedded with COFF		a29k-none-coff
+AMD 29000 embedded with a.out		a29k-none-aout
+Ultracomputer remote kernel debug	a29k-nyu-kern
+
+ * New remote interfaces
+
+AMD 29000 Adapt
+AMD 29000 Minimon
+
+
+*** Changes in GDB-4.0:
+
+ *  New Facilities
+
+Wide output is wrapped at good places to make the output more readable.
+
+Gdb now supports cross-debugging from a host machine of one type to a
+target machine of another type.  Communication with the target system
+is over serial lines.  The ``target'' command handles connecting to the
+remote system; the ``load'' command will download a program into the
+remote system.  Serial stubs for the m68k and i386 are provided.  Gdb
+also supports debugging of realtime processes running under VxWorks,
+using SunRPC Remote Procedure Calls over TCP/IP to talk to a debugger
+stub on the target system.
+
+New CPUs supported include the AMD 29000 and Intel 960.
+
+GDB now reads object files and symbol tables via a ``binary file'' 
+library, which allows a single copy of GDB to debug programs of multiple
+object file types such as a.out and coff.
+
+There is now a GDB reference card in "doc/refcard.tex".  (Make targets
+refcard.dvi and refcard.ps are available to format it).
+
+
+ *  Control-Variable user interface simplified
+
+All variables that control the operation of the debugger can be set
+by the ``set'' command, and displayed by the ``show'' command.
+
+For example, ``set prompt new-gdb=>'' will change your prompt to new-gdb=>.
+``Show prompt'' produces the response:
+Gdb's prompt is new-gdb=>.
+
+What follows are the NEW set commands.  The command ``help set'' will
+print a complete list of old and new set commands.  ``help set FOO''
+will give a longer description of the variable FOO.  ``show'' will show
+all of the variable descriptions and their current settings.
+
+confirm on/off:  Enables warning questions for operations that are
+		 hard to recover from, e.g. rerunning the program while
+		 it is already running.  Default is ON.
+
+editing on/off:  Enables EMACS style command line editing 
+                 of input.  Previous lines can be recalled with 
+		 control-P, the current line can be edited with control-B,
+		 you can search for commands with control-R, etc.
+		 Default is ON.
+
+history filename NAME:  NAME is where the gdb command history 
+			will be stored.  The default is .gdb_history,
+			or the value of the environment variable
+			GDBHISTFILE.
+
+history size N:  The size, in commands, of the command history.  The 
+		 default is 256, or the value of the environment variable
+		 HISTSIZE.
+
+history save on/off: If this value is set to ON, the history file will
+		      be saved after exiting gdb.  If set to OFF, the 
+		      file will not be saved.  The default is OFF.
+
+history expansion on/off: If this value is set to ON, then csh-like 
+			  history expansion will be performed  on 
+			  command line input.  The default is OFF.
+
+radix N:  Sets the default radix for input and output.  It can be set
+	  to 8, 10, or 16.  Note that the argument to "radix" is interpreted
+	  in the current radix, so "set radix 10" is always a no-op.
+
+height N: This integer value is the number of lines on a page. Default
+          is 24, the current `stty rows'' setting, or the ``li#''
+	  setting from the termcap entry matching the environment
+	  variable TERM.
+
+width N:  This integer value is the number of characters on a line.
+	  Default is 80, the current `stty cols'' setting, or the ``co#''
+	  setting from the termcap entry matching the environment
+	  variable TERM.
+
+Note: ``set screensize'' is obsolete. Use ``set height'' and
+``set width'' instead.
+
+print address on/off:  Print memory addresses in various command displays,
+		      such as stack traces and structure values.  Gdb looks
+		      more ``symbolic'' if you turn this off; it looks more
+		      ``machine level'' with it on.  Default is ON.
+
+print array on/off:  Prettyprint arrays.  New convenient format!  Default 
+                    is OFF.
+
+print demangle on/off:   Print C++ symbols in "source" form if on,
+			"raw" form if off.
+
+print asm-demangle on/off:  Same, for assembler level printouts
+			like instructions.
+
+print vtbl on/off:  Prettyprint C++ virtual function tables.  Default is OFF.
+
+
+ *  Support for Epoch Environment.
+
+The epoch environment is a version of Emacs v18 with windowing.  One
+new command, ``inspect'', is identical to ``print'', except that if you
+are running in the epoch environment, the value is printed in its own
+window.
+
+
+ *  Support for Shared Libraries
+
+GDB can now debug programs and core files that use SunOS shared libraries.
+Symbols from a shared library cannot be referenced
+before the shared library has been linked with the program (this
+happens after you type ``run'' and before the function main() is entered).
+At any time after this linking (including when examining core files
+from dynamically linked programs), gdb reads the symbols from each
+shared library when you type the ``sharedlibrary'' command.
+It can be abbreviated ``share''.
+
+sharedlibrary REGEXP:  Load shared object library symbols for files 
+                       matching a unix regular expression.  No argument
+		       indicates to load symbols for all shared libraries.
+
+info sharedlibrary:  Status of loaded shared libraries.
+
+
+ *  Watchpoints
+
+A watchpoint stops execution of a program whenever the value of an
+expression changes.  Checking for this slows down execution
+tremendously whenever you are in the scope of the expression, but is
+quite useful for catching tough ``bit-spreader'' or pointer misuse
+problems.  Some machines such as the 386 have hardware for doing this
+more quickly, and future versions of gdb will use this hardware.
+
+watch EXP:  Set a watchpoint (breakpoint) for an expression.
+
+info watchpoints:  Information about your watchpoints.
+
+delete N:   Deletes watchpoint number N (same as breakpoints).
+disable N:  Temporarily turns off watchpoint number N (same as breakpoints).
+enable N:   Re-enables watchpoint number N (same as breakpoints).
+
+
+ *  C++ multiple inheritance
+
+When used with a GCC version 2 compiler, GDB supports multiple inheritance
+for C++ programs.
+
+ *  C++ exception handling
+
+Gdb now supports limited C++ exception handling.  Besides the existing
+ability to breakpoint on an exception handler, gdb can breakpoint on
+the raising of an exception (before the stack is peeled back to the
+handler's context).
+
+catch FOO:  If there is a FOO exception handler in the dynamic scope,
+	    set a breakpoint to catch exceptions which may be raised there.
+	    Multiple exceptions (``catch foo bar baz'') may be caught.
+
+info catch:  Lists all exceptions which may be caught in the
+             current stack frame.
+
+
+ *  Minor command changes
+
+The command ``call func (arg, arg, ...)'' now acts like the print
+command, except it does not print or save a value if the function's result
+is void.  This is similar to dbx usage.
+
+The ``up'' and ``down'' commands now always print the frame they end up
+at; ``up-silently'' and `down-silently'' can be used in scripts to change
+frames without printing.
+
+ *  New directory command
+
+'dir' now adds directories to the FRONT of the source search path.
+The path starts off empty.  Source files that contain debug information
+about the directory in which they were compiled can be found even
+with an empty path; Sun CC and GCC include this information.  If GDB can't
+find your source file in the current directory, type "dir .".
+
+ * Configuring GDB for compilation
+
+For normal use, type ``./configure host''.  See README or gdb.texinfo
+for more details.
+
+GDB now handles cross debugging.  If you are remotely debugging between 
+two different machines, type ``./configure host -target=targ''.
+Host is the machine where GDB will run; targ is the machine
+where the program that you are debugging will run.
diff --git a/gdb/README b/gdb/README
new file mode 100644
index 0000000..fd791ce
--- /dev/null
+++ b/gdb/README
@@ -0,0 +1,618 @@
+		     README for gdb-4.18 release
+		   Updated 4 Apr 1999 by Jim Blandy
+
+This is GDB, the GNU source-level debugger.
+A summary of new features is in the file `NEWS'.
+
+See the GDB home page at http://www.cygnus.com/gdb/ for up to date
+release information, mailing list links and archives, etc.
+
+
+Unpacking and Installation -- quick overview
+==========================
+
+In this release, the GDB debugger sources, the generic GNU include
+files, the BFD ("binary file description") library, the readline
+library, and other libraries all have directories of their own
+underneath the gdb-4.18 directory.  The idea is that a variety of GNU
+tools can share a common copy of these things.  Be aware of variation
+over time--for example don't try to build gdb with a copy of bfd from
+a release other than the gdb release (such as a binutils or gas
+release), especially if the releases are more than a few weeks apart.
+Configuration scripts and makefiles exist to cruise up and down this
+directory tree and automatically build all the pieces in the right
+order.
+
+When you unpack the gdb-4.18.tar.gz file, you'll find a directory
+called `gdb-4.18', which contains:
+
+  COPYING          config.sub*      libiberty/       opcodes/
+  COPYING.LIB      configure*       mmalloc/         readline/
+  Makefile.in      configure.in     move-if-change*  sim/
+  README           etc/             mpw-README       texinfo/
+  bfd/             gdb/             mpw-build.in     utils/
+  config/          include/         mpw-config.in
+  config.guess*    install.sh*      mpw-configure
+
+To build GDB, you can just do:
+
+	cd gdb-4.18
+	./configure
+	make
+	cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)
+
+This will configure and build all the libraries as well as GDB.
+If `configure' can't determine your system type, specify one as its
+argument, e.g., sun4 or decstation.
+
+If you get compiler warnings during this stage, see the `Reporting Bugs'
+section below; there are a few known problems.
+
+GDB requires an ANSI C compiler.  If you do not have an ANSI C
+compiler for your system, you may be able to download and install the
+GNU CC compiler.  It is available via anonymous FTP from ftp.gnu.org,
+in /pub/gnu/gcc (as a URL, that's ftp://ftp.gnu.org/pub/gnu/gcc).
+
+GDB can be used as a cross-debugger, running on a machine of one type
+while debugging a program running on a machine of another type.  See below.
+
+
+More Documentation
+******************
+
+   All the documentation for GDB comes as part of the machine-readable
+distribution.  The documentation is written in Texinfo format, which is
+a documentation system that uses a single source file to produce both
+on-line information and a printed manual.  You can use one of the Info
+formatting commands to create the on-line version of the documentation
+and TeX (or `texi2roff') to typeset the printed version.
+
+   GDB includes an already formatted copy of the on-line Info version of
+this manual in the `gdb/doc' subdirectory.  The main Info file is
+`gdb-4.18/gdb/doc/gdb.info', and it refers to subordinate files matching
+`gdb.info*' in the same directory.  If necessary, you can print out
+these files, or read them with any editor; but they are easier to read
+using the `info' subsystem in GNU Emacs or the standalone `info' program,
+available as part of the GNU Texinfo distribution.
+
+   If you want to format these Info files yourself, you need one of the
+Info formatting programs, such as `texinfo-format-buffer' or
+`makeinfo'.
+
+   If you have `makeinfo' installed, and are in the top level GDB
+source directory (`gdb-4.18', in the case of version 4.18), you can make
+the Info file by typing:
+
+     cd gdb/doc
+     make info
+
+   If you want to typeset and print copies of this manual, you need
+TeX, a program to print its DVI output files, and `texinfo.tex', the
+Texinfo definitions file.  This file is included in the GDB
+distribution, in the directory `gdb-4.18/texinfo'.
+
+   TeX is a typesetting program; it does not print files directly, but
+produces output files called DVI files.  To print a typeset document,
+you need a program to print DVI files.  If your system has TeX
+installed, chances are it has such a program.  The precise command to
+use depends on your system; `lpr -d' is common; another (for PostScript
+devices) is `dvips'.  The DVI print command may require a file name
+without any extension or a `.dvi' extension.
+
+   TeX also requires a macro definitions file called `texinfo.tex'. 
+This file tells TeX how to typeset a document written in Texinfo
+format.  On its own, TeX cannot read, much less typeset a Texinfo file.
+ `texinfo.tex' is distributed with GDB and is located in the
+`gdb-4.18/texinfo' directory.
+
+   If you have TeX and a DVI printer program installed, you can typeset
+and print this manual.  First switch to the the `gdb' subdirectory of
+the main source directory (for example, to `gdb-4.18/gdb') and then type:
+
+     make gdb.dvi
+
+
+Installing GDB
+**************
+
+   GDB comes with a `configure' script that automates the process of
+preparing GDB for installation; you can then use `make' to build the
+`gdb' program.
+
+   The GDB distribution includes all the source code you need for GDB in
+a single directory, whose name is usually composed by appending the
+version number to `gdb'.
+
+   For example, the GDB version 4.18 distribution is in the `gdb-4.18'
+directory.  That directory contains:
+
+`gdb-4.18/{COPYING,COPYING.LIB}'
+     Standard GNU license files.  Please read them.
+
+`gdb-4.18/bfd'
+     source for the Binary File Descriptor library
+
+`gdb-4.18/config*'
+     script for configuring GDB, along with other support files
+
+`gdb-4.18/gdb'
+     the source specific to GDB itself
+
+`gdb-4.18/include'
+     GNU include files
+
+`gdb-4.18/libiberty'
+     source for the `-liberty' free software library
+
+`gdb-4.18/mmalloc'
+     source for the GNU memory-mapped malloc package
+
+`gdb-4.18/opcodes'
+     source for the library of opcode tables and disassemblers
+
+`gdb-4.18/readline'
+     source for the GNU command-line interface
+
+`gdb-4.18/sim'
+     source for some simulators (ARM, D10V, SPARC, M32R, MIPS, PPC, V850, etc)
+
+`gdb-4.18/intl'
+     source for the GNU gettext library, for internationalization.
+     This is slightly modified from the standalone gettext
+     distribution you can get from GNU.
+
+`gdb-4.18/texinfo'
+     The `texinfo.tex' file, which you need in order to make a printed
+     manual using TeX.
+
+`gdb-4.18/etc'
+     Coding standards, useful files for editing GDB, and other
+     miscellanea.
+
+`gdb-4.18/utils'
+     A grab bag of random utilities.
+
+
+   The simplest way to configure and build GDB is to run `configure'
+from the `gdb-VERSION-NUMBER' source directory, which in this example
+is the `gdb-4.18' directory.
+
+   First switch to the `gdb-VERSION-NUMBER' source directory if you are
+not already in it; then run `configure'.
+
+   For example:
+
+     cd gdb-4.18
+     ./configure
+     make
+
+   Running `configure' followed by `make' builds the `bfd',
+`readline', `mmalloc', and `libiberty' libraries, then `gdb' itself.
+The configured source files, and the binaries, are left in the
+corresponding source directories.
+
+   `configure' is a Bourne-shell (`/bin/sh') script; if your system
+does not recognize this automatically when you run a different shell,
+you may need to run `sh' on it explicitly:
+
+     sh configure
+
+   If you run `configure' from a directory that contains source
+directories for multiple libraries or programs, such as the `gdb-4.18'
+source directory for version 4.18, `configure' creates configuration
+files for every directory level underneath (unless you tell it not to,
+with the `--norecursion' option).
+
+   You can run the `configure' script from any of the subordinate
+directories in the GDB distribution, if you only want to configure that
+subdirectory; but be sure to specify a path to it.
+
+   For example, with version 4.18, type the following to configure only
+the `bfd' subdirectory:
+
+     cd gdb-4.18/bfd
+     ../configure
+
+   You can install `gdb' anywhere; it has no hardwired paths. However,
+you should make sure that the shell on your path (named by the `SHELL'
+environment variable) is publicly readable.  Remember that GDB uses the
+shell to start your program--some systems refuse to let GDB debug child
+processes whose programs are not readable.
+
+
+Compiling GDB in another directory
+==================================
+
+   If you want to run GDB versions for several host or target machines,
+you need a different `gdb' compiled for each combination of host and
+target.  `configure' is designed to make this easy by allowing you to
+generate each configuration in a separate subdirectory, rather than in
+the source directory.  If your `make' program handles the `VPATH'
+feature correctly (GNU `make' and SunOS 'make' are two that should),
+running `make' in each of these directories builds the `gdb' program
+specified there.
+
+   To build `gdb' in a separate directory, run `configure' with the
+`--srcdir' option to specify where to find the source. (You also need
+to specify a path to find `configure' itself from your working
+directory.  If the path to `configure' would be the same as the
+argument to `--srcdir', you can leave out the `--srcdir' option; it
+will be assumed.)
+
+   For example, with version 4.18, you can build GDB in a separate
+directory for a Sun 4 like this:
+
+     cd gdb-4.18
+     mkdir ../gdb-sun4
+     cd ../gdb-sun4
+     ../gdb-4.18/configure sun4
+     make
+
+   When `configure' builds a configuration using a remote source
+directory, it creates a tree for the binaries with the same structure
+(and using the same names) as the tree under the source directory.  In
+the example, you'd find the Sun 4 library `libiberty.a' in the
+directory `gdb-sun4/libiberty', and GDB itself in `gdb-sun4/gdb'.
+
+   One popular reason to build several GDB configurations in separate
+directories is to configure GDB for cross-compiling (where GDB runs on
+one machine--the host--while debugging programs that run on another
+machine--the target).  You specify a cross-debugging target by giving
+the `--target=TARGET' option to `configure'.
+
+   When you run `make' to build a program or library, you must run it
+in a configured directory--whatever directory you were in when you
+called `configure' (or one of its subdirectories).
+
+   The `Makefile' that `configure' generates in each source directory
+also runs recursively.  If you type `make' in a source directory such
+as `gdb-4.18' (or in a separate configured directory configured with
+`--srcdir=PATH/gdb-4.18'), you will build all the required libraries,
+and then build GDB.
+
+   When you have multiple hosts or targets configured in separate
+directories, you can run `make' on them in parallel (for example, if
+they are NFS-mounted on each of the hosts); they will not interfere
+with each other.
+
+
+Specifying names for hosts and targets
+======================================
+
+   The specifications used for hosts and targets in the `configure'
+script are based on a three-part naming scheme, but some short
+predefined aliases are also supported.  The full naming scheme encodes
+three pieces of information in the following pattern:
+
+     ARCHITECTURE-VENDOR-OS
+
+   For example, you can use the alias `sun4' as a HOST argument or in a
+`--target=TARGET' option.  The equivalent full name is
+`sparc-sun-sunos4'.
+
+   The `configure' script accompanying GDB does not provide any query
+facility to list all supported host and target names or aliases. 
+`configure' calls the Bourne shell script `config.sub' to map
+abbreviations to full names; you can read the script, if you wish, or
+you can use it to test your guesses on abbreviations--for example:
+
+     % sh config.sub sun4
+     sparc-sun-sunos4.1.1
+     % sh config.sub sun3
+     m68k-sun-sunos4.1.1
+     % sh config.sub decstation
+     mips-dec-ultrix4.2
+     % sh config.sub hp300bsd
+     m68k-hp-bsd
+     % sh config.sub i386v
+     i386-pc-sysv
+     % sh config.sub i786v
+     Invalid configuration `i786v': machine `i786v' not recognized
+
+`config.sub' is also distributed in the GDB source directory
+(`gdb-4.18', for version 4.18).
+
+
+`configure' options
+===================
+
+   Here is a summary of the `configure' options and arguments that are
+most often useful for building GDB.  `configure' also has several other
+options not listed here.  *note : (configure.info)What Configure Does,
+for a full explanation of `configure'.
+
+     configure [--help]
+               [--prefix=DIR]
+               [--srcdir=PATH]
+               [--norecursion] [--rm]
+	       [--enable-build-warnings]
+               [--target=TARGET]
+	       [--host=HOST]
+	       [HOST]
+
+You may introduce options with a single `-' rather than `--' if you
+prefer; but you may abbreviate option names if you use `--'.
+
+`--help'
+     Display a quick summary of how to invoke `configure'.
+
+`-prefix=DIR'
+     Configure the source to install programs and files under directory
+     `DIR'.
+
+`--srcdir=PATH'
+     *Warning: using this option requires GNU `make', or another `make'
+     that compatibly implements the `VPATH' feature.*
+     Use this option to make configurations in directories separate
+     from the GDB source directories.  Among other things, you can use
+     this to build (or maintain) several configurations simultaneously,
+     in separate directories.  `configure' writes configuration
+     specific files in the current directory, but arranges for them to
+     use the source in the directory PATH.  `configure' will create
+     directories under the working directory in parallel to the source
+     directories below PATH.
+
+`--norecursion'
+     Configure only the directory level where `configure' is executed;
+     do not propagate configuration to subdirectories.
+
+`--rm'
+     Remove the configuration that the other arguments specify.
+
+`--enable-build-warnings'
+     When building the GDB sources, ask the compiler to warn about any
+     code which looks even vaguely suspicious.  You should only using
+     this feature if you're compiling with GNU CC.  It passes the
+     following flags:
+	-Wall
+	-Wpointer-arith
+	-Wstrict-prototypes
+	-Wmissing-prototypes
+	-Wmissing-declarations
+
+`--target=TARGET'
+     Configure GDB for cross-debugging programs running on the specified
+     TARGET.  Without this option, GDB is configured to debug programs
+     that run on the same machine (HOST) as GDB itself.
+
+     There is no convenient way to generate a list of all available
+     targets.
+
+`--host=HOST'
+     Configure GDB to run on the specified HOST.
+
+     There is no convenient way to generate a list of all available
+     hosts.
+
+`HOST ...'
+     Same as `--host=HOST'.  If you omit this, GDB will guess; it's
+     quite accurate.
+
+`configure' accepts other options, for compatibility with configuring
+other GNU tools recursively; but these are the only options that affect
+GDB or its supporting libraries.
+
+
+Languages other than C
+=======================
+
+See the GDB manual (gdb/doc/gdb.texinfo) for information on this.
+
+
+Kernel debugging
+=================
+
+I have't done this myself so I can't really offer any advice.
+Remote debugging over serial lines works fine, but the kernel debugging
+code in here has not been tested in years.  Van Jacobson has
+better kernel debugging, but the UC lawyers won't let FSF have it.
+
+
+Remote debugging
+=================
+
+The files m68k-stub.c, i386-stub.c, and sparc-stub.c are examples of
+remote stubs to be used with remote.c.  They are designed to run
+standalone on an m68k, i386, or SPARC cpu and communicate properly with
+the remote.c stub over a serial line.
+
+The directory gdb/gdbserver/ contains `gdbserver', a program that
+allows remote debugging for Unix applications.  gdbserver is only
+supported for some native configurations, including Sun 3, Sun 4,
+and Linux.
+
+There are a number of remote interfaces for talking to existing ROM
+monitors and other hardware:
+
+	remote-adapt.c	 AMD 29000 "Adapt"
+	remote-array.c   Array Tech RAID controller
+	remote-bug.c	 Motorola BUG monitor
+        remote-d10v.c    GDB protocol, talking to a d10v chip
+	remote-e7000.c	 Hitachi E7000 ICE
+	remote-eb.c	 AMD 29000 "EBMON"
+	remote-es.c	 Ericsson 1800 monitor
+	remote-est.c	 EST emulator
+	remote-hms.c	 Hitachi Micro Systems H8/300 monitor
+	remote-mips.c	 MIPS remote debugging protocol
+	remote-mm.c	 AMD 29000 "minimon"
+	remote-nindy.c   Intel 960 "Nindy"
+	remote-nrom.c	 NetROM ROM emulator
+	remote-os9k.c	 PC running OS/9000
+	remote-rdi.c	 ARM with Angel monitor
+	remote-rdp.c	 ARM with Demon monitor
+	remote-sds.c	 PowerPC SDS monitor
+	remote-sim.c	 Generalized simulator protocol
+	remote-st.c	 Tandem ST-2000 monitor
+	remote-udi.c	 AMD 29000 using the AMD "Universal Debug Interface"
+	remote-vx.c	 VxWorks realtime kernel
+
+Remote-vx.c and the vx-share subdirectory contain a remote interface for the
+VxWorks realtime kernel, which communicates over TCP using the Sun
+RPC library.  This would be a useful starting point for other remote-
+via-ethernet back ends.
+
+Remote-udi.c and the 29k-share subdirectory contain a remote interface
+for AMD 29000 programs, which uses the AMD "Universal Debug Interface".
+This allows GDB to talk to software simulators, emulators, and/or bare
+hardware boards, via network or serial interfaces.  Note that GDB only
+provides an interface that speaks UDI, not a complete solution.  You
+will need something on the other end that also speaks UDI.
+
+
+Reporting Bugs
+===============
+
+The correct address for reporting bugs found in gdb is
+"bug-gdb@gnu.org".  Please email all bugs, and all requests for
+help with GDB, to that address.  Please include the GDB version number
+(e.g., gdb-4.18), and how you configured it (e.g., "sun4" or "mach386
+host, i586-intel-synopsys target").  Since GDB now supports so many
+different configurations, it is important that you be precise about this.
+If at all possible, you should include the actual banner that GDB prints
+when it starts up, or failing that, the actual configure command that
+you used when configuring GDB.
+
+For more information on how/whether to report bugs, see the GDB Bugs
+section of the GDB manual (gdb/doc/gdb.texinfo).
+
+Known bugs:
+
+  * Under Ultrix 4.2 (DECstation-3100) or Alphas under OSF/1, we have
+    seen problems with backtraces after interrupting the inferior out
+    of a read().  The problem is caused by ptrace() returning an
+    incorrect value for the frame pointer register (register 15 or
+    30).  As far as we can tell, this is a kernel problem.  Any help
+    with this would be greatly appreciated.
+
+  * Under Ultrix 4.4 (DECstation-3100), setting the TERMCAP environment
+    variable to a string without a trailing ':' can cause GDB to dump
+    core upon startup.  Although the core file makes it look as though
+    GDB code failed, the crash actually occurs within a call to the
+    termcap library function tgetent().  The problem can be solved by
+    using the GNU Termcap library.
+
+    Alphas running OSF/1 (versions 1.0 through 2.1) have the same buggy
+    termcap code, but GDB behaves strangely rather than crashing.
+
+  * On DECstations there are warnings about shift counts out of range in
+    various BFD modules.  None of them is a cause for alarm, they are actually
+    a result of bugs in the DECstation compiler.
+
+  * Notes for the DEC Alpha using OSF/1:
+    The debugging output of native cc has two known problems; we view these
+    as compiler bugs.
+    The linker miscompacts symbol tables, which causes gdb to confuse the
+    type of variables or results in `struct <illegal>' type outputs.
+    dbx has the same problems with those executables.  A workaround is to
+    specify -Wl,-b when linking, but that will increase the executable size
+    considerably.
+    If a structure has incomplete type in one file (e.g., "struct foo *"
+    without a definition for "struct foo"), gdb will be unable to find the
+    structure definition from another file.
+    It has been reported that the Ultrix 4.3A compiler on decstations has the
+    same problems.
+
+  * Notes for Solaris 2.x, using the SPARCworks cc compiler:
+    You have to compile your program with the -xs option of the SPARCworks
+    compiler to be able to debug your program with gdb.
+    Under Solaris 2.3 you also need patch 101409-03 (Jumbo linker patch).
+    Under Solaris 2.2, if you have patch 101052 installed, make sure
+    that it is at least at revision 101052-06.
+
+  * Under Irix 5 for SGIs, you must have installed the `compiler_dev.hdr'
+    subsystem that is on the IDO CD, otherwise you will get complaints
+    that certain files such as `/usr/include/syms.h' cannot be found.
+
+  * Notes for BSD/386:
+    To compile gdb-4.18 on BSD/386, you must run the configure script and
+    its subscripts with bash.  Here is an easy way to do this:
+
+	bash -c 'CONFIG_SHELL=/bin/bash ./configure'
+
+    (configure will report i386-unknown-bsd).  Then, compile with the
+    standard "make" command.
+
+GDB can produce warnings about symbols that it does not understand.  By
+default, these warnings are disabled.  You can enable them by executing
+`set complaint 10' (which you can put in your ~/.gdbinit if you like).
+I recommend doing this if you are working on a compiler, assembler,
+linker, or GDB, since it will point out problems that you may be able
+to fix.  Warnings produced during symbol reading indicate some mismatch
+between the object file and GDB's symbol reading code.  In many cases,
+it's a mismatch between the specs for the object file format, and what
+the compiler actually outputs or the debugger actually understands.
+
+
+X Windows versus GDB
+=====================
+
+You should check out DDD, the Data Display Debugger.  Here's the blurb
+from the DDD web site, http://www.cs.tu-bs.de/softech/ddd:
+
+    The Data Display Debugger (DDD) is a popular graphical user
+    interface for command-line debuggers such as GDB, DBX, JDB, WDB,
+    XDB, the Perl debugger, and the Python debugger.  Besides ``usual''
+    front-end features such as viewing source texts, DDD has become
+    famous through its interactive graphical data display, where data
+    structures are displayed as graphs. A simple mouse click
+    dereferences pointers or views structure contents, updated each
+    time the program stops. Using DDD, you can reason about your
+    application by watching its data, not just by viewing it execute
+    lines of source code.
+
+Emacs users will very likely enjoy the Grand Unified Debugger mode;
+try typing `M-x gdb RET'.
+
+Those interested in experimenting with a new kind of gdb-mode
+should load gdb/gdba.el into GNU Emacs 19.25 or later.  Comments
+on this mode are also welcome.
+
+
+Writing Code for GDB
+=====================
+
+There is a lot of information about writing code for GDB in the
+internals manual, distributed with GDB in gdb/doc/gdbint.texinfo.  You
+can read it by hand, print it by using TeX and texinfo, or process it
+into an `info' file for use with Emacs' info mode or the standalone
+`info' program.
+
+If you are pondering writing anything but a short patch, especially
+take note of the information about copyrights in the node Submitting
+Patches.  It can take quite a while to get all the paperwork done, so
+we encourage you to start that process as soon as you decide you are
+planning to work on something, or at least well ahead of when you
+think you will be ready to submit the patches.
+
+
+GDB Testsuite
+=============
+
+There is a DejaGNU based testsuite available for testing your newly
+built GDB, or for regression testing GDBs with local modifications.
+
+Running the testsuite requires the prior installation of DejaGNU,
+which is generally available via ftp; you'll need a pretty recent
+release.  Once DejaGNU is installed, you can run the tests in one of
+two ways:
+
+  (1)	cd gdb-4.18/gdb		(assuming you also unpacked gdb)
+	make check
+
+or
+
+  (2)	cd gdb-4.18/gdb/testsuite
+	make site.exp	(builds the site specific file)
+	runtest -tool gdb GDB=../gdb    (or GDB=<somepath> as appropriate)
+
+The second method gives you slightly more control in case of problems with
+building one or more test executables or if you are using the testsuite
+'standalone', without it being part of the GDB source tree.
+
+See the DejaGNU documentation for further details.
+
+
+(this is for editing this file with GNU emacs)
+Local Variables:
+mode: text
+End:
diff --git a/gdb/TODO b/gdb/TODO
new file mode 100644
index 0000000..fcbcd16
--- /dev/null
+++ b/gdb/TODO
@@ -0,0 +1,471 @@
+If you find inaccuracies in this list, please send mail to
+bug-gdb@prep.ai.mit.edu.  If you would like to work on any of these,
+you should consider sending mail to the same address, to find out
+whether anyone else is working on it.
+
+General To Do List
+------------------
+
+This list is probably not up to date, and opinions vary about the
+importance or even desirability of some of the items.
+
+Add an "info bfd" command that displays supported object formats,
+similarly to objdump -i.
+
+START_INFERIOR_TRAPS_EXPECTED need never be defined to 2, since that
+is its default value.  Clean this up.
+
+It should be possible to use symbols from shared libraries before we know
+exactly where the libraries will be loaded.  E.g. "b perror" before running
+the program.  This could maybe be done as an extension of the "breakpoint
+re-evaluation" after new symbols are loaded.
+
+Make single_step() insert and remove breakpoints in one operation.
+
+Speed up single stepping by avoiding extraneous ptrace calls.
+
+Speed up single stepping by not inserting and removing breakpoints
+each time the inferior starts and stops.
+
+Breakpoints should not be inserted and deleted all the time.  Only the
+one(s) there should be removed when we have to step over one.  Support
+breakpoints that don't have to be removed to step over them.
+
+Update gdbint.texinfo to include doc on the directory structure and 
+the various tricks of building gdb.
+
+Do a tutorial in gdb.texinfo on how to do simple things in gdb.
+E.g. how to set a breakpoint that just prints something and continues.
+How to break on aborts.  Etc.
+
+Provide "voodoo" debugging of core files.  This creates a zombie
+process as a child of the debugger, and loads it up with the data,
+stack, and regs of the core file.  This allows you to call functions
+in the executable, to manipulate the data in the core file.
+
+GDB reopens the source file on every line, as you "next" through it.
+
+Referencing the vtbl member of a struct doesn't work.  It prints OK
+if you print the struct, but it gets 0 if you try to deref it.
+
+Persistent command history: A feature where you could save off a list
+of the commands you did, so you can edit it into something that will bring
+the target to the same place every time you source it.
+This would also be useful for automated fast watchpointing; if you go
+past the place where it watchpoints, you just start it over again and
+do it more carefully.
+
+Deal with the SunOS 4.0 and 4.1.1 ptrace bug that loses the registers if
+the stack is paged out.
+
+Finish the C++ exception handling stub routines.  Lint points them out
+as unused statics functions.
+
+Perhaps "i source" should take an argument like that of "list".
+
+See if core-aout.c's fetch_core_registers can be used on more machines.
+E.g. MIPS (mips-xdep.c).
+
+unpack_double() does not handle IEEE float on the target unless the host
+is also IEEE.  Death on a vax.
+
+Set up interface between GDB and INFO so that you can hop into interactive
+INFO and back out again.  When running under Emacs, should use Emacs
+info, else fork the info program.  Installation of GDB should install
+its texinfo files into the info tree automagically, including the readline
+texinfo files.
+
+"help address" ought to find the "help set print address" entry.
+
+Remove the VTBL internal guts from printouts of C++ structs, unless
+vtblprint is set.
+
+Remove "at 0xnnnn" from the "b foo" response, if `print address off' and if
+it matches the source line indicated.
+
+The prompt at end of screen should accept space as well as CR.
+
+Check STORE_RETURN_VALUE on all architectures.  Check near it in tm-sparc.h
+for other bogosities.
+
+Check for storage leaks in GDB, I'm sure there are a lot!
+
+vtblprint of a vtbl should demangle the names it's printing.
+
+Backtrace should point out what the currently selected frame is, in
+its display, perhaps showing "@3 foo (bar, ...)" or ">3 foo (bar,
+...)" rather than "#3 foo (bar, ...)".
+
+"i program" should work for core files, and display more info, like what
+actually caused it to die.
+
+"x/10i" should shorten the long name, if any, on subsequent lines.
+
+Check through the code for FIXME comments and fix them.  dbxread.c,
+blockframe.c, and plenty more. (I count 634 as of 940621 - sts)
+
+"next" over a function that longjumps, never stops until next time you happen
+to get to that spot by accident.  E.g. "n" over execute_command which has
+an error.
+
+"set zeroprint off", don't bother printing members of structs which
+are entirely zero.  Useful for those big structs with few useful
+members.
+
+GDB does four ioctl's for every command, probably switching terminal modes
+to/from inferior or for readline or something.
+
+terminal_ours versus terminal_inferior: cache state.  Switch should be a noop
+if the state is the same, too.
+
+ptype $i6 = void??!
+
+Clean up invalid_float handling so gdb doesn't coredump when it tries to
+access a NaN.  While this might work on SPARC, other machines are not
+configured right.
+
+"b value_at ; commands ; continue ; end" stops EVERY OTHER TIME!
+Then once you enter a command, it does the command, runs two more
+times, and then stops again!  Bizarre...  (This behaviour has been
+modified, but it is not yet 100% predictable when e.g. the commands
+call functions in the child, and while there, the child is interrupted
+with a signal, or hits a breakpoint.)
+
+help completion, help history should work.
+
+Check that we can handle stack trace through varargs AND alloca in same
+function, on 29K.
+
+wait_for_inferior loops forever if wait() gives it an error.
+
+"i frame" shows wrong "arglist at" location, doesn't show where the args
+should be found, only their actual values.
+
+There should be a way for "set" commands to validate the new setting
+before it takes effect.
+
+A mess of floating point opcodes are missing from sparc-opcode.h.
+Also, a little program should test the table for bits that are
+overspecified or underspecified.  E.g. if the must-be-ones bits
+and the must-be-zeroes bits leave some fields unexamined, and the format
+string leaves them unprinted, then point this out.  If multiple
+non-alias patterns match, point this out too.  Finally, there should
+be a sparc-optest.s file that tries each pattern out.  This file
+should end up coming back the same (modulo transformation comments) 
+if fed to "gas" then the .o is fed to gdb for disassembly.
+
+Eliminate all the core_file_command's in all the xdep files.
+Eliminate separate declarations of registers[] everywhere.
+
+"ena d" is ambiguous, why?  "ena delete" seems to think it is a command!
+
+Perhaps move the tdep, xdep, and nat files, into the config
+subdirectories.  If not, at least straighten out their names so that
+they all start with the machine name.
+
+inferior_status should include stop_print_frame.  It won't need to be
+reset in wait_for_inferior after bpstat_stop_status call, then.
+
+i line VAR produces "Line number not known for symbol ``var''.".  I
+thought we were stashing that info now!
+
+We should be able to write to random files at hex offsets like adb.
+
+Make "target xxx" command interruptible.
+
+Handle add_file with separate text, data, and bss addresses.  Maybe
+handle separate addresses for each segment in the object file?
+
+Handle free_named_symtab to cope with multiply-loaded object files
+in a dynamic linking environment.  Should remember the last copy loaded,
+but not get too snowed if it finds references to the older copy.
+
+Generalize and Standardize the RPC interface to a target program,
+improve it beyond the "ptrace" interface, and see if it can become a
+standard for remote debugging.  (This is talking about the vxworks
+interface.  Seems unlikely to me that there will be "a standard" for
+remote debugging anytime soon --kingdon, 8 Nov 1994).
+
+Remove all references to:
+	text_offset
+	data_offset
+	text_data_start
+	text_end
+	exec_data_offset
+	...
+now that we have BFD.  All remaining are in machine dependent files.
+
+When quitting with a running program, if a core file was previously
+examined, you get "Couldn't read float regs from core file"...if 
+indeed it can't.  generic_mourn_inferior...
+
+Have remote targets give a warning on a signal argument to
+target_resume.  Or better yet, extend the protocols so that it works
+like it does on the Unix-like systems.
+
+Sort help and info output.
+
+Re-organize help categories into things that tend to fit on a screen
+and hang together.
+
+renote-nindy.c handles interrupts poorly; it error()s out of badly
+chosen places, e.g. leaving current_frame zero, which causes core dumps
+on the next command.
+
+Add in commands like ADB's for searching for patterns, etc.  We should
+be able to examine and patch raw unsymboled binaries as well in gdb as
+we can in adb.  (E.g. increase the timeout in /bin/login without source).
+
+Those xdep files that call register_addr without defining it are
+probably simply broken.  When reconfiguring this part of gdb, I could
+only make guesses about how to redo some of those files, and I
+probably guessed wrong, or left them "for later" when I have a
+machine that can attempt to build them.
+
+When doing "step" or "next", if a few lines of source are skipped between
+the previous line and the current one, print those lines, not just the
+last line of a multiline statement.
+
+When searching for C++ superclasses in value_cast in valops.c, we must
+not search the "fields", only the "superclasses".  There might be a
+struct with a field name that matches the superclass name.  This can
+happen when the struct was defined before the superclass (before the
+name became a typedef).
+
+Handling of "&" address-of operator needs some serious overhaul
+for ANSI C and consistency on arrays and functions.
+  For "float point[15];":
+ptype &point[4]   ==> Attempt to take address of non-lvalue.
+  For "char *malloc();":
+ptype malloc	  ==> "char *()";  should be same as
+ptype &malloc     ==> "char *(*)()"
+call printf ("%x\n", malloc)   ==> weird value, should be same as
+call printf ("%x\n", &malloc)  ==> correct value
+
+Fix dbxread.c symbol reading in the presence of interrupts.  It
+currently leaves a cleanup to blow away the entire symbol table when a
+QUIT occurs.  (What's wrong with that? -kingdon, 28 Oct 1993).
+
+Mipsread.c reads include files depth-first, because the dependencies
+in the psymtabs are way too inclusive (it seems to me).  Figure out what
+really depends on what, to avoid recursing 20 or 30 times while reading
+real symtabs.
+
+value_add() should be subtracting the lower bound of arrays, if known,
+and possibly checking against the upper bound for error reporting.
+
+mipsread.c symbol table allocation and deallocation should be checked.
+My suspicion is that it's full of memory leaks.
+
+SunOS should have a target_lookup_symbol() for common'd things allocated
+by the shared library linker ld.so.
+
+When listing source lines, check for a preceding \n, to verify that
+the file hasn't changed out from under us.
+
+When listing source lines, eat leading whitespace corresponding to the
+line-number prefix we print.  This avoids long lines wrapping.
+
+mipsread.c needs to check for old symtabs and psymtabs for the same
+files, the way it happens for dbxread.c and coffread.c, for VxWorks
+incremental symbol table reloading.
+
+Get all the remote systems (where the protocol allows it) to be able to
+stop the remote system when the GDB user types ^C (like remote.c
+does).  For ebmon, use ^Ak.
+
+Possible feature: A version of the "disassemble" command which shows
+both source and assembly code ("set symbol-filename on" is a partial
+solution).
+
+investigate "x/s 0" (right now stops early) (I think maybe GDB is
+using a 0 address for bad purposes internally).
+
+Make "info path" and path_command work again (but independent of the
+environment either of gdb or that we'll pass to the inferior).
+
+Make GDB understand the GCC feature for putting octal constants in
+enums.  Make it so overflow on an enum constant does not error_type
+the whole type.  Allow arbitrarily large enums with type attributes.
+Put all this stuff in the testsuite.
+
+Make TYPE_CODE_ERROR with a non-zero TYPE_LENGTH more useful (print
+the value in hex; process type attributes).  Add this to the
+testsuite.  This way future compilers can add new types and old
+versions of GDB can do something halfway reasonable.
+
+Clean up formatting of "info registers" on MIPS and 88k.  See if it
+is possible to do this generically across all target architectures.
+
+GDB gets bfd/corefile.c and gdb/corefile.c confused (this should be easy to
+repeat even with something more recent than GDB 4.9).
+
+Check that unmatched RBRAC doesn't abort().
+
+Fix mdebugread.c:parse_type to do fundamental types right (see
+rs6000_builtin_type in stabsread.c for what "right" is--the point is
+that the debug format fixes the sizes of these things and it shouldn't
+depend on stuff like TARGET_PTR_BIT and so on.  For mdebug, there seem
+to be separate bt* codes for 64 bit and 32 bit things, and GDB should
+be aware of that).  Also use a switch statement for clarity and speed.
+
+Investigate adding symbols in target_load--some targets do, some
+don't.
+
+Put dirname in psymtabs and change lookup*symtab to use dirname (so
+/foo/bar.c works whether compiled by cc /foo/bar.c, or cd /foo; cc
+bar.c).
+
+Merge xcoffread.c and coffread.c.  Use breakpoint_re_set instead of
+fixup_breakpoints.
+
+Fix byte order and int size sins in tm-a29k.h
+(EXTRACT_RETURN_VALUE).  Perhaps should reproduce bug and verify fix
+(or perhaps should just fix it...).
+
+Make a watchpoint on a constant expression an error (or warning
+perhaps)
+
+Make a watchpoint which contains a function call an error (it is
+broken now, making it work is probably not worth the effort).
+
+Re-do calls to signal() in remote.c, and inflow.c (set_sigint_trap and
+so on) to be independent of the debugging target, using target_stop to
+stop the inferior.  Probably the part which is now handled by
+interrupt_query in remote.c can be done without any new features in
+the debugging target.
+
+New test case based on weird.exp but in which type numbers are not
+renumbered (thus multiply defining a type).  This currently causes an
+infinite loop on "p v_comb".
+
+Nuke baseclass_addr.
+
+Nuke USG define.
+
+"source file more recent" loses on re-read
+
+Fix 386 floating point so that floating point registers are real
+registers (but code can deal at run-time if they are missing, like
+mips and 68k).  This would clean up "info float" and related stuff.
+
+Look at Solaris bug in interrupt.exp.  Can get out of syscall with
+PRSABORT (syscall will return EINTR) but merely doing that leads to a
+"can't read memory" error.
+
+gcc -g -c enummask.c then gdb enummask.o, then "p v".  GDB complains
+about not being able to access memory location 0.
+
+-------------------- enummask.c
+enum mask
+{
+  ANIMAL = 0,
+  VEGETABLE = 1,
+  MINERAL = 2,
+  BASIC_CATEGORY = 3,
+
+  WHITE = 0,
+  BLUE = 4,
+  GREEN = 8,
+  BLACK = 0xc,
+  COLOR = 0xc,
+
+  ALIVE = 0x10,
+
+  LARGE = 0x20
+} v;
+
+If try to modify value in file with "set write off" should give
+appropriate error not "cannot access memory at address 0x65e0".
+
+Why do we allow a target to omit standard register names (NO_STD_REGS
+in tm-z8k.h)?  I thought the standard register names were supposed to
+be just that, standard.
+
+Make DEBUG_EXPRESSIONS a maintenance command, dependent on
+MAINTENANCE_COMMANDS.
+
+Allow core file without exec file on RS/6000.
+
+Make sure "shell" with no arguments works right on DOS.
+
+Make gdb.ini (as well as .gdbinit) be checked on all platforms, so
+the same directory can be NFS-mounted on unix or DOS, and work the
+same way.
+
+cd ~/tmp/<M-?> causes infinite loop (where ~/tmp is a directory).
+
+Get SECT_OFF_TEXT stuff out of objfile_relocate (might be needed to
+get RS/6000 to work right, might not be immediately relevant).
+
+Clean up add_toc_to_loadinfo
+
+Think about attached processes and sharing terminal.
+
+John sez in reference to ignoring errors from tcsegpgrp if attach_flag:
+set_tty_state should not have any trouble with attached processes.
+Instead, the tty handling should leave the pgrp of the tty alone when
+attaching to processes (perhaps pass terminal_init_inferior a flag
+saying whether we're attaching).
+
+PAGE_SIZE redefined warnings on AIX.  Probably should be using
+BFD_PAGE_SIZE throughout BFD.
+
+Rewrite proceed, wait_for_inferior, and normal_stop to clean them up.
+Suggestions: 
+
+	1) Make each test in wait_for_inferior a seperate subroutine
+	   call.
+	2) Combine wait_for_inferior and normal_stop to clean up
+	   communication via global variables.
+	3) See if you can find some way to clean up the global
+	   variables that are used; possibly group them by data flow
+	   and information content?
+
+Work out some kind of way to allow running the inferior to be done as
+a sub-execution of, eg. breakpoint command lists.  Currently running
+the inferior interupts any command list execution.  This would require
+some rewriting of wait_for_inferior & friends, and hence should
+probably be done in concert with the above.
+
+Add function arguments to gdb user defined functions.
+
+Add convenience variables that refer to exec file, symbol file,
+selected frame source file, selected frame function, selected frame
+line number, etc.
+
+Add a "suspend" subcommand of the "continue" command to suspend gdb
+while continuing  execution of the subprocess.  Useful when you are
+debugging servers and you want to dodge out and initiate a connection
+to a server running under gdb.
+
+Add stab information to allow reasonable debugging of inline functions
+(possibly they should show up on a stack backtrace?  With a note
+indicating that they weren't "real"?).
+
+Modify the naked "until" command to step until past the current source
+line, rather than past the current pc value.  This is tricky simply
+because the low level routines have no way of specifying a multi-line
+step range, and there is no way of saying "don't print stuff when we
+stop" from above (otherwise could just call step many times).
+
+Modify the handling of symbols grouped through BINCL/EINCL stabs to
+allocate a partial symtab for each BINCL/EINCL grouping.  This will
+seriously decrease the size of inter-psymtab dependencies and hence
+lessen the amount that needs to be read in when a new source file is
+accessed. 
+
+Do an "x/i $pc" after each stepi or nexti.  
+
+Modify all of the disassemblers to use printf_filtered to get correct
+more filtering.
+
+Modify gdb to work correctly with Pascal.
+
+Add a command for searching memory, a la adb.  It specifies size,
+mask, value, start address.  ADB searches until it finds it or hits
+an error (or is interrupted).
+
+# Local Variables:
+# mode: text
+# End:
diff --git a/gdb/a29k-tdep.c b/gdb/a29k-tdep.c
new file mode 100644
index 0000000..b3c0567
--- /dev/null
+++ b/gdb/a29k-tdep.c
@@ -0,0 +1,1040 @@
+/* Target-machine dependent code for the AMD 29000
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995
+   Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Jim Kingdon.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "value.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "gdbcmd.h"
+
+/* If all these bits in an instruction word are zero, it is a "tag word"
+   which precedes a function entry point and gives stack traceback info.
+   This used to be defined as 0xff000000, but that treated 0x00000deb as
+   a tag word, while it is really used as a breakpoint.  */
+#define	TAGWORD_ZERO_MASK	0xff00f800
+
+extern CORE_ADDR text_start;	/* FIXME, kludge... */
+
+/* The user-settable top of the register stack in virtual memory.  We
+   won't attempt to access any stored registers above this address, if set
+   nonzero.  */
+
+static CORE_ADDR rstack_high_address = UINT_MAX;
+
+
+/* Should call_function allocate stack space for a struct return?  */
+/* On the a29k objects over 16 words require the caller to allocate space.  */
+int
+a29k_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 16 * 4);
+}
+
+
+/* Structure to hold cached info about function prologues.  */
+
+struct prologue_info
+{
+  CORE_ADDR pc;			/* First addr after fn prologue */
+  unsigned rsize, msize;	/* register stack frame size, mem stack ditto */
+  unsigned mfp_used : 1;	/* memory frame pointer used */
+  unsigned rsize_valid : 1;	/* Validity bits for the above */
+  unsigned msize_valid : 1;
+  unsigned mfp_valid : 1;
+};
+
+/* Examine the prologue of a function which starts at PC.  Return
+   the first addess past the prologue.  If MSIZE is non-NULL, then
+   set *MSIZE to the memory stack frame size.  If RSIZE is non-NULL,
+   then set *RSIZE to the register stack frame size (not including
+   incoming arguments and the return address & frame pointer stored
+   with them).  If no prologue is found, *RSIZE is set to zero.
+   If no prologue is found, or a prologue which doesn't involve
+   allocating a memory stack frame, then set *MSIZE to zero.
+
+   Note that both msize and rsize are in bytes.  This is not consistent
+   with the _User's Manual_ with respect to rsize, but it is much more
+   convenient.
+
+   If MFP_USED is non-NULL, *MFP_USED is set to nonzero if a memory
+   frame pointer is being used.  */
+
+CORE_ADDR
+examine_prologue (pc, rsize, msize, mfp_used)
+     CORE_ADDR pc;
+     unsigned *msize;
+     unsigned *rsize;
+     int *mfp_used;
+{
+  long insn;
+  CORE_ADDR p = pc;
+  struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc);
+  struct prologue_info *mi = 0;
+
+  if (msymbol != NULL)
+    mi = (struct prologue_info *) msymbol -> info;
+
+  if (mi != 0)
+    {
+      int valid = 1;
+      if (rsize != NULL)
+	{
+	  *rsize = mi->rsize;
+	  valid &= mi->rsize_valid;
+	}
+      if (msize != NULL)
+	{
+	  *msize = mi->msize;
+	  valid &= mi->msize_valid;
+	}
+      if (mfp_used != NULL)
+	{
+	  *mfp_used = mi->mfp_used;
+	  valid &= mi->mfp_valid;
+	}
+      if (valid)
+	return mi->pc;
+    }
+
+  if (rsize != NULL)
+    *rsize = 0;
+  if (msize != NULL)
+    *msize = 0;
+  if (mfp_used != NULL)
+    *mfp_used = 0;
+  
+  /* Prologue must start with subtracting a constant from gr1.
+     Normally this is sub gr1,gr1,<rsize * 4>.  */
+  insn = read_memory_integer (p, 4);
+  if ((insn & 0xffffff00) != 0x25010100)
+    {
+      /* If the frame is large, instead of a single instruction it
+	 might be a pair of instructions:
+	 const <reg>, <rsize * 4>
+	 sub gr1,gr1,<reg>
+	 */
+      int reg;
+      /* Possible value for rsize.  */
+      unsigned int rsize0;
+      
+      if ((insn & 0xff000000) != 0x03000000)
+	{
+	  p = pc;
+	  goto done;
+	}
+      reg = (insn >> 8) & 0xff;
+      rsize0 = (((insn >> 8) & 0xff00) | (insn & 0xff));
+      p += 4;
+      insn = read_memory_integer (p, 4);
+      if ((insn & 0xffffff00) != 0x24010100
+	  || (insn & 0xff) != reg)
+	{
+	  p = pc;
+	  goto done;
+	}
+      if (rsize != NULL)
+	*rsize = rsize0;
+    }
+  else
+    {
+      if (rsize != NULL)
+	*rsize = (insn & 0xff);
+    }
+  p += 4;
+
+  /* Next instruction ought to be asgeu V_SPILL,gr1,rab.  
+   * We don't check the vector number to allow for kernel debugging.  The 
+   * kernel will use a different trap number. 
+   * If this insn is missing, we just keep going; Metaware R2.3u compiler
+   * generates prologue that intermixes initializations and puts the asgeu
+   * way down.
+   */
+  insn = read_memory_integer (p, 4);
+  if ((insn & 0xff00ffff) == (0x5e000100|RAB_HW_REGNUM))
+    {
+      p += 4;
+    }
+
+  /* Next instruction usually sets the frame pointer (lr1) by adding
+     <size * 4> from gr1.  However, this can (and high C does) be
+     deferred until anytime before the first function call.  So it is
+     OK if we don't see anything which sets lr1.  
+     To allow for alternate register sets (gcc -mkernel-registers)  the msp
+     register number is a compile time constant. */
+
+  /* Normally this is just add lr1,gr1,<size * 4>.  */
+  insn = read_memory_integer (p, 4);
+  if ((insn & 0xffffff00) == 0x15810100)
+    p += 4;
+  else
+    {
+      /* However, for large frames it can be
+	 const <reg>, <size *4>
+	 add lr1,gr1,<reg>
+	 */
+      int reg;
+      CORE_ADDR q;
+
+      if ((insn & 0xff000000) == 0x03000000)
+	{
+	  reg = (insn >> 8) & 0xff;
+	  q = p + 4;
+	  insn = read_memory_integer (q, 4);
+	  if ((insn & 0xffffff00) == 0x14810100
+	      && (insn & 0xff) == reg)
+	    p = q;
+	}
+    }
+
+  /* Next comes "add lr{<rsize-1>},msp,0", but only if a memory
+     frame pointer is in use.  We just check for add lr<anything>,msp,0;
+     we don't check this rsize against the first instruction, and
+     we don't check that the trace-back tag indicates a memory frame pointer
+     is in use.  
+     To allow for alternate register sets (gcc -mkernel-registers)  the msp
+     register number is a compile time constant.
+
+     The recommended instruction is actually "sll lr<whatever>,msp,0". 
+     We check for that, too.  Originally Jim Kingdon's code seemed
+     to be looking for a "sub" instruction here, but the mask was set
+     up to lose all the time. */
+  insn = read_memory_integer (p, 4);
+  if (((insn & 0xff80ffff) == (0x15800000|(MSP_HW_REGNUM<<8)))     /* add */
+   || ((insn & 0xff80ffff) == (0x81800000|(MSP_HW_REGNUM<<8))))    /* sll */
+    {
+      p += 4;
+      if (mfp_used != NULL)
+	*mfp_used = 1;
+    }
+
+  /* Next comes a subtraction from msp to allocate a memory frame,
+     but only if a memory frame is
+     being used.  We don't check msize against the trace-back tag.
+
+     To allow for alternate register sets (gcc -mkernel-registers) the msp
+     register number is a compile time constant.
+
+     Normally this is just
+     sub msp,msp,<msize>
+     */
+  insn = read_memory_integer (p, 4);
+  if ((insn & 0xffffff00) == 
+		(0x25000000|(MSP_HW_REGNUM<<16)|(MSP_HW_REGNUM<<8)))
+    {
+      p += 4;
+      if (msize != NULL) 
+	*msize = insn & 0xff;
+    }
+  else
+    {
+      /* For large frames, instead of a single instruction it might
+	 be
+
+	 const <reg>, <msize>
+	 consth <reg>, <msize>     ; optional
+	 sub msp,msp,<reg>
+	 */
+      int reg;
+      unsigned msize0;
+      CORE_ADDR q = p;
+
+      if ((insn & 0xff000000) == 0x03000000)
+	{
+	  reg = (insn >> 8) & 0xff;
+	  msize0 = ((insn >> 8) & 0xff00) | (insn & 0xff);
+	  q += 4;
+	  insn = read_memory_integer (q, 4);
+	  /* Check for consth.  */
+	  if ((insn & 0xff000000) == 0x02000000
+	      && (insn & 0x0000ff00) == reg)
+	    {
+	      msize0 |= (insn << 8) & 0xff000000;
+	      msize0 |= (insn << 16) & 0x00ff0000;
+	      q += 4;
+	      insn = read_memory_integer (q, 4);
+	    }
+	  /* Check for sub msp,msp,<reg>.  */
+          if ((insn & 0xffffff00) == 
+		(0x24000000|(MSP_HW_REGNUM<<16)|(MSP_HW_REGNUM<<8))
+	      && (insn & 0xff) == reg)
+	    {
+	      p = q + 4;
+	      if (msize != NULL)
+		*msize = msize0;
+	    }
+	}
+    }
+
+  /* Next instruction might be asgeu V_SPILL,gr1,rab.  
+   * We don't check the vector number to allow for kernel debugging.  The 
+   * kernel will use a different trap number. 
+   * Metaware R2.3u compiler
+   * generates prologue that intermixes initializations and puts the asgeu
+   * way down after everything else.
+   */
+  insn = read_memory_integer (p, 4);
+  if ((insn & 0xff00ffff) == (0x5e000100|RAB_HW_REGNUM))
+    {
+      p += 4;
+    }
+
+ done:
+  if (msymbol != NULL)
+    {
+      if (mi == 0)
+	{
+	  /* Add a new cache entry.  */
+	  mi = (struct prologue_info *)xmalloc (sizeof (struct prologue_info));
+	  msymbol -> info = (char *)mi;
+	  mi->rsize_valid = 0;
+	  mi->msize_valid = 0;
+	  mi->mfp_valid = 0;
+	}
+      /* else, cache entry exists, but info is incomplete.  */
+      mi->pc = p;
+      if (rsize != NULL)
+	{
+	  mi->rsize = *rsize;
+	  mi->rsize_valid = 1;
+	}
+      if (msize != NULL)
+	{
+	  mi->msize = *msize;
+	  mi->msize_valid = 1;
+	}
+      if (mfp_used != NULL)
+	{
+	  mi->mfp_used = *mfp_used;
+	  mi->mfp_valid = 1;
+	}
+    }
+  return p;
+}
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+CORE_ADDR
+skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  return examine_prologue (pc, NULL, NULL, NULL);
+}
+
+/*
+ * Examine the one or two word tag at the beginning of a function.
+ * The tag word is expect to be at 'p', if it is not there, we fail
+ * by returning 0.  The documentation for the tag word was taken from
+ * page 7-15 of the 29050 User's Manual.  We are assuming that the
+ * m bit is in bit 22 of the tag word, which seems to be the agreed upon
+ * convention today (1/15/92).
+ * msize is return in bytes.
+ */
+
+static int	/* 0/1 - failure/success of finding the tag word  */
+examine_tag (p, is_trans, argcount, msize, mfp_used)
+     CORE_ADDR p;
+     int *is_trans;
+     int *argcount;
+     unsigned *msize;
+     int *mfp_used;
+{
+  unsigned int tag1, tag2;
+
+  tag1 = read_memory_integer (p, 4);
+  if ((tag1 & TAGWORD_ZERO_MASK) != 0)	/* Not a tag word */
+    return 0;
+  if (tag1 & (1<<23)) 			/* A two word tag */
+    {
+       tag2 = read_memory_integer (p-4, 4);
+       if (msize)
+	 *msize = tag2 * 2;
+    }
+  else					/* A one word tag */
+    {
+       if (msize)
+	 *msize = tag1 & 0x7ff;
+    }
+  if (is_trans)
+    *is_trans = ((tag1 & (1<<21)) ? 1 : 0);
+  /* Note that this includes the frame pointer and the return address
+     register, so the actual number of registers of arguments is two less.
+     argcount can be zero, however, sometimes, for strange assembler
+     routines.  */
+  if (argcount)
+    *argcount = (tag1 >> 16) & 0x1f;
+  if (mfp_used)
+    *mfp_used = ((tag1 & (1<<22)) ? 1 : 0); 
+  return 1;
+}
+
+/* Initialize the frame.  In addition to setting "extra" frame info,
+   we also set ->frame because we use it in a nonstandard way, and ->pc
+   because we need to know it to get the other stuff.  See the diagram
+   of stacks and the frame cache in tm-a29k.h for more detail.  */
+
+static void
+init_frame_info (innermost_frame, frame)
+     int innermost_frame;
+     struct frame_info *frame;
+{
+  CORE_ADDR p;
+  long insn;
+  unsigned rsize;
+  unsigned msize;
+  int mfp_used, trans;
+  struct symbol *func;
+
+  p = frame->pc;
+
+  if (innermost_frame)
+    frame->frame = read_register (GR1_REGNUM);
+  else
+    frame->frame = frame->next->frame + frame->next->rsize;
+  
+#if 0 /* CALL_DUMMY_LOCATION == ON_STACK */
+  This wont work;
+#else
+  if (PC_IN_CALL_DUMMY (p, 0, 0))
+#endif
+    {
+      frame->rsize = DUMMY_FRAME_RSIZE;
+      /* This doesn't matter since we never try to get locals or args
+	 from a dummy frame.  */
+      frame->msize = 0;
+      /* Dummy frames always use a memory frame pointer.  */
+      frame->saved_msp = 
+	read_register_stack_integer (frame->frame + DUMMY_FRAME_RSIZE - 4, 4);
+      frame->flags |= (TRANSPARENT_FRAME|MFP_USED);
+      return;
+    }
+    
+  func = find_pc_function (p);
+  if (func != NULL)
+    p = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+  else
+    {
+      /* Search backward to find the trace-back tag.  However,
+	 do not trace back beyond the start of the text segment
+	 (just as a sanity check to avoid going into never-never land).  */
+#if 1
+      while (p >= text_start
+	     && ((insn = read_memory_integer (p, 4)) & TAGWORD_ZERO_MASK) != 0)
+	p -= 4;
+#else /* 0 */
+      char pat[4] = {0, 0, 0, 0};
+      char mask[4];
+      char insn_raw[4];
+      store_unsigned_integer (mask, 4, TAGWORD_ZERO_MASK);
+      /* Enable this once target_search is enabled and tested.  */
+      target_search (4, pat, mask, p, -4, text_start, p+1, &p, &insn_raw);
+      insn = extract_unsigned_integer (insn_raw, 4);
+#endif /* 0 */
+
+      if (p < text_start)
+	{
+	  /* Couldn't find the trace-back tag.
+	     Something strange is going on.  */
+	  frame->saved_msp = 0;
+	  frame->rsize = 0;
+	  frame->msize = 0;
+	  frame->flags = TRANSPARENT_FRAME;
+	  return;
+	}
+      else
+	/* Advance to the first word of the function, i.e. the word
+	   after the trace-back tag.  */
+	p += 4;
+    }
+
+  /* We've found the start of the function.  
+     Try looking for a tag word that indicates whether there is a
+     memory frame pointer and what the memory stack allocation is.
+     If one doesn't exist, try using a more exhaustive search of
+     the prologue.  */
+
+  if (examine_tag(p-4,&trans,(int *)NULL,&msize,&mfp_used)) /* Found good tag */
+      examine_prologue (p, &rsize, 0, 0);
+  else 						/* No tag try prologue */
+      examine_prologue (p, &rsize, &msize, &mfp_used);
+
+  frame->rsize = rsize;
+  frame->msize = msize;
+  frame->flags = 0;
+  if (mfp_used)
+  	frame->flags |= MFP_USED;
+  if (trans)
+  	frame->flags |= TRANSPARENT_FRAME;
+  if (innermost_frame)
+    {
+      frame->saved_msp = read_register (MSP_REGNUM) + msize;
+    }
+  else
+    {
+      if (mfp_used)
+  	 frame->saved_msp =
+	      read_register_stack_integer (frame->frame + rsize - 4, 4);
+      else
+  	    frame->saved_msp = frame->next->saved_msp + msize;
+    }
+}
+
+void
+init_extra_frame_info (frame)
+     struct frame_info *frame;
+{
+  if (frame->next == 0)
+    /* Assume innermost frame.  May produce strange results for "info frame"
+       but there isn't any way to tell the difference.  */
+    init_frame_info (1, frame);
+  else {
+      /* We're in get_prev_frame_info.
+         Take care of everything in init_frame_pc.  */
+      ;
+    }
+}
+
+void
+init_frame_pc (fromleaf, frame)
+     int fromleaf;
+     struct frame_info *frame;
+{
+  frame->pc = (fromleaf ? SAVED_PC_AFTER_CALL (frame->next) :
+	     frame->next ? FRAME_SAVED_PC (frame->next) : read_pc ());
+  init_frame_info (fromleaf, frame);
+}
+
+/* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their
+   offsets being relative to the memory stack pointer (high C) or
+   saved_msp (gcc).  */
+
+CORE_ADDR
+frame_locals_address (fi)
+     struct frame_info *fi;
+{
+  if (fi->flags & MFP_USED) 
+    return fi->saved_msp;
+  else
+    return fi->saved_msp - fi->msize;
+}
+
+/* Routines for reading the register stack.  The caller gets to treat
+   the register stack as a uniform stack in memory, from address $gr1
+   straight through $rfb and beyond.  */
+
+/* Analogous to read_memory except the length is understood to be 4.
+   Also, myaddr can be NULL (meaning don't bother to read), and
+   if actual_mem_addr is non-NULL, store there the address that it
+   was fetched from (or if from a register the offset within
+   registers).  Set *LVAL to lval_memory or lval_register, depending
+   on where it came from.  The contents written into MYADDR are in
+   target format.  */
+void
+read_register_stack (memaddr, myaddr, actual_mem_addr, lval)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     CORE_ADDR *actual_mem_addr;
+     enum lval_type *lval;
+{
+  long rfb = read_register (RFB_REGNUM);
+  long rsp = read_register (RSP_REGNUM);
+
+  /* If we don't do this 'info register' stops in the middle. */
+  if (memaddr >= rstack_high_address) 
+    {
+      /* a bogus value */
+      static char val[] = {~0, ~0, ~0, ~0};
+      /* It's in a local register, but off the end of the stack.  */
+      int regnum = (memaddr - rsp) / 4 + LR0_REGNUM;
+      if (myaddr != NULL)
+	{
+	  /* Provide bogusness */
+	  memcpy (myaddr, val, 4);
+	}
+      supply_register(regnum, val);	/* More bogusness */
+      if (lval != NULL)
+	*lval = lval_register;
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = REGISTER_BYTE (regnum);
+    }
+  /* If it's in the part of the register stack that's in real registers,
+     get the value from the registers.  If it's anywhere else in memory
+     (e.g. in another thread's saved stack), skip this part and get
+     it from real live memory.  */
+  else if (memaddr < rfb && memaddr >= rsp)
+    {
+      /* It's in a register.  */
+      int regnum = (memaddr - rsp) / 4 + LR0_REGNUM;
+      if (regnum > LR0_REGNUM + 127)
+	error ("Attempt to read register stack out of range.");
+      if (myaddr != NULL)
+	read_register_gen (regnum, myaddr);
+      if (lval != NULL)
+	*lval = lval_register;
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = REGISTER_BYTE (regnum);
+    }
+  else
+    {
+      /* It's in the memory portion of the register stack.  */
+      if (myaddr != NULL) 
+	read_memory (memaddr, myaddr, 4);
+      if (lval != NULL)
+	*lval = lval_memory;
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = memaddr;
+    }
+}
+
+/* Analogous to read_memory_integer
+   except the length is understood to be 4.  */
+long
+read_register_stack_integer (memaddr, len)
+     CORE_ADDR memaddr;
+     int len;
+{
+  char buf[4];
+  read_register_stack (memaddr, buf, NULL, NULL);
+  return extract_signed_integer (buf, 4);
+}
+
+/* Copy 4 bytes from GDB memory at MYADDR into inferior memory
+   at MEMADDR and put the actual address written into in
+   *ACTUAL_MEM_ADDR.  */
+static void
+write_register_stack (memaddr, myaddr, actual_mem_addr)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     CORE_ADDR *actual_mem_addr;
+{
+  long rfb = read_register (RFB_REGNUM);
+  long rsp = read_register (RSP_REGNUM);
+  /* If we don't do this 'info register' stops in the middle. */
+  if (memaddr >= rstack_high_address) 
+    {
+      /* It's in a register, but off the end of the stack.  */
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = 0; 
+    }
+  else if (memaddr < rfb)
+    {
+      /* It's in a register.  */
+      int regnum = (memaddr - rsp) / 4 + LR0_REGNUM;
+      if (regnum < LR0_REGNUM || regnum > LR0_REGNUM + 127)
+	error ("Attempt to read register stack out of range.");
+      if (myaddr != NULL)
+	write_register (regnum, *(long *)myaddr);
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = 0;
+    }
+  else
+    {
+      /* It's in the memory portion of the register stack.  */
+      if (myaddr != NULL)
+	write_memory (memaddr, myaddr, 4);
+      if (actual_mem_addr != NULL)
+	*actual_mem_addr = memaddr;
+    }
+}
+
+/* Find register number REGNUM relative to FRAME and put its
+   (raw) contents in *RAW_BUFFER.  Set *OPTIMIZED if the variable
+   was optimized out (and thus can't be fetched).  If the variable
+   was fetched from memory, set *ADDRP to where it was fetched from,
+   otherwise it was fetched from a register.
+
+   The argument RAW_BUFFER must point to aligned memory.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lvalp)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lvalp;
+{
+  struct frame_info *fi;
+  CORE_ADDR addr;
+  enum lval_type lval;
+
+  if (!target_has_registers)
+    error ("No registers.");
+
+  /* Probably now redundant with the target_has_registers check.  */
+  if (frame == 0)
+    return;
+
+  /* Once something has a register number, it doesn't get optimized out.  */
+  if (optimized != NULL)
+    *optimized = 0;
+  if (regnum == RSP_REGNUM)
+    {
+      if (raw_buffer != NULL)
+	{
+	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->frame);
+	}
+      if (lvalp != NULL)
+	*lvalp = not_lval;
+      return;
+    }
+  else if (regnum == PC_REGNUM && frame->next != NULL)
+    {
+      if (raw_buffer != NULL)
+	{
+	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->pc);
+	}
+
+      /* Not sure we have to do this.  */
+      if (lvalp != NULL)
+	*lvalp = not_lval;
+
+      return;
+    }
+  else if (regnum == MSP_REGNUM)
+    {
+      if (raw_buffer != NULL)
+	{
+	  if (frame->next != NULL)
+	    {
+	      store_address (raw_buffer, REGISTER_RAW_SIZE (regnum),
+			     frame->next->saved_msp);
+	    }
+	  else
+	    read_register_gen (MSP_REGNUM, raw_buffer);
+	}
+      /* The value may have been computed, not fetched.  */
+      if (lvalp != NULL)
+	*lvalp = not_lval;
+      return;
+    }
+  else if (regnum < LR0_REGNUM || regnum >= LR0_REGNUM + 128)
+    {
+      /* These registers are not saved over procedure calls,
+	 so just print out the current values.  */
+      if (raw_buffer != NULL)
+	read_register_gen (regnum, raw_buffer);
+      if (lvalp != NULL)
+	*lvalp = lval_register;
+      if (addrp != NULL)
+	*addrp = REGISTER_BYTE (regnum);
+      return;
+    }
+      
+  addr = frame->frame + (regnum - LR0_REGNUM) * 4;
+  if (raw_buffer != NULL)
+    read_register_stack (addr, raw_buffer, &addr, &lval);
+  if (lvalp != NULL)
+    *lvalp = lval;
+  if (addrp != NULL)
+    *addrp = addr;
+}
+
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+void
+pop_frame ()
+{
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR rfb = read_register (RFB_REGNUM);		      
+  CORE_ADDR gr1 = frame->frame + frame->rsize;
+  CORE_ADDR lr1;							      
+  CORE_ADDR original_lr0;
+  int must_fix_lr0 = 0;
+  int i;
+
+  /* If popping a dummy frame, need to restore registers.  */
+  if (PC_IN_CALL_DUMMY (read_register (PC_REGNUM),
+			read_register (SP_REGNUM),
+			FRAME_FP (frame)))
+    {
+      int lrnum = LR0_REGNUM + DUMMY_ARG/4;
+      for (i = 0; i < DUMMY_SAVE_SR128; ++i)
+	write_register (SR_REGNUM (i + 128),read_register (lrnum++));
+      for (i = 0; i < DUMMY_SAVE_SR160; ++i)
+	write_register (SR_REGNUM(i+160), read_register (lrnum++));
+      for (i = 0; i < DUMMY_SAVE_GREGS; ++i)
+	write_register (RETURN_REGNUM + i, read_register (lrnum++));
+      /* Restore the PCs and prepare to restore LR0.  */
+      write_register(PC_REGNUM, read_register (lrnum++));
+      write_register(NPC_REGNUM, read_register (lrnum++));
+      write_register(PC2_REGNUM, read_register (lrnum++));
+      original_lr0 = read_register (lrnum++);
+      must_fix_lr0 = 1;
+    }
+
+  /* Restore the memory stack pointer.  */
+  write_register (MSP_REGNUM, frame->saved_msp);
+  /* Restore the register stack pointer.  */				      
+  write_register (GR1_REGNUM, gr1);
+
+  /* If we popped a dummy frame, restore lr0 now that gr1 has been restored. */
+  if (must_fix_lr0) 
+    write_register (LR0_REGNUM, original_lr0);
+
+  /* Check whether we need to fill registers.  */			      
+  lr1 = read_register (LR0_REGNUM + 1);				      
+  if (lr1 > rfb)							      
+    {									      
+      /* Fill.  */							      
+      int num_bytes = lr1 - rfb;
+      int i;								      
+      long word;
+						      
+      write_register (RAB_REGNUM, read_register (RAB_REGNUM) + num_bytes);  
+      write_register (RFB_REGNUM, lr1);				      
+      for (i = 0; i < num_bytes; i += 4)				      
+        {
+	  /* Note: word is in host byte order.  */
+          word = read_memory_integer (rfb + i, 4);
+          write_register (LR0_REGNUM + ((rfb - gr1) % 0x80) + i / 4, word);
+        }								      
+    }
+  flush_cached_frames ();						      
+}
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+void 
+push_dummy_frame ()
+{
+  long w;
+  CORE_ADDR rab, gr1;
+  CORE_ADDR msp = read_register (MSP_REGNUM);
+  int lrnum, i;
+  CORE_ADDR original_lr0;
+      
+  /* Read original lr0 before changing gr1.  This order isn't really needed
+     since GDB happens to have a snapshot of all the regs and doesn't toss
+     it when gr1 is changed.  But it's The Right Thing To Do.  */
+  original_lr0 = read_register (LR0_REGNUM);
+
+  /* Allocate the new frame. */ 
+  gr1 = read_register (GR1_REGNUM) - DUMMY_FRAME_RSIZE;
+  write_register (GR1_REGNUM, gr1);
+
+#ifdef VXWORKS_TARGET
+  /* We force re-reading all registers to get the new local registers set
+     after gr1 has been modified. This fix is due to the lack of single
+     register read/write operation in the RPC interface between VxGDB and
+     VxWorks. This really must be changed ! */
+
+  vx_read_register (-1);
+
+#endif /* VXWORK_TARGET */
+
+  rab = read_register (RAB_REGNUM);
+  if (gr1 < rab)
+    {
+      /* We need to spill registers.  */
+      int num_bytes = rab - gr1;
+      CORE_ADDR rfb = read_register (RFB_REGNUM);
+      int i;
+      long word;
+
+      write_register (RFB_REGNUM, rfb - num_bytes);
+      write_register (RAB_REGNUM, gr1);
+      for (i = 0; i < num_bytes; i += 4)
+	{
+	  /* Note:  word is in target byte order.  */
+	  read_register_gen (LR0_REGNUM + i / 4, (char *) &word);
+	  write_memory (rfb - num_bytes + i, (char *) &word, 4);
+	}
+    }
+
+  /* There are no arguments in to the dummy frame, so we don't need
+     more than rsize plus the return address and lr1.  */
+  write_register (LR0_REGNUM + 1, gr1 + DUMMY_FRAME_RSIZE + 2 * 4);
+
+  /* Set the memory frame pointer.  */
+  write_register (LR0_REGNUM + DUMMY_FRAME_RSIZE / 4 - 1, msp);
+
+  /* Allocate arg_slop.  */
+  write_register (MSP_REGNUM, msp - 16 * 4);
+
+  /* Save registers.  */
+  lrnum = LR0_REGNUM + DUMMY_ARG/4;
+  for (i = 0; i < DUMMY_SAVE_SR128; ++i)
+    write_register (lrnum++, read_register (SR_REGNUM (i + 128)));
+  for (i = 0; i < DUMMY_SAVE_SR160; ++i)
+    write_register (lrnum++, read_register (SR_REGNUM (i + 160)));
+  for (i = 0; i < DUMMY_SAVE_GREGS; ++i)
+    write_register (lrnum++, read_register (RETURN_REGNUM + i));
+  /* Save the PCs and LR0.  */
+  write_register (lrnum++, read_register (PC_REGNUM));
+  write_register (lrnum++, read_register (NPC_REGNUM));
+  write_register (lrnum++, read_register (PC2_REGNUM));
+
+  /* Why are we saving LR0?  What would clobber it? (the dummy frame should
+     be below it on the register stack, no?).  */
+  write_register (lrnum++, original_lr0);
+}
+
+
+
+/*
+   This routine takes three arguments and makes the cached frames look
+   as if these arguments defined a frame on the cache.  This allows the
+   rest of `info frame' to extract the important arguments without much
+   difficulty.  Since an individual frame on the 29K is determined by
+   three values (FP, PC, and MSP), we really need all three to do a
+   good job.  */
+
+struct frame_info *
+setup_arbitrary_frame (argc, argv)
+     int argc;
+     CORE_ADDR *argv;
+{
+  struct frame_info *frame;
+
+  if (argc != 3)
+    error ("AMD 29k frame specifications require three arguments: rsp pc msp");
+
+  frame = create_new_frame (argv[0], argv[1]);
+
+  if (!frame)
+    fatal ("internal: create_new_frame returned invalid frame id");
+  
+  /* Creating a new frame munges the `frame' value from the current
+     GR1, so we restore it again here.  FIXME, untangle all this
+     29K frame stuff...  */
+  frame->frame = argv[0];
+
+  /* Our MSP is in argv[2].  It'd be intelligent if we could just
+     save this value in the FRAME.  But the way it's set up (FIXME),
+     we must save our caller's MSP.  We compute that by adding our
+     memory stack frame size to our MSP.  */
+  frame->saved_msp = argv[2] + frame->msize;
+
+  return frame;
+}
+
+int
+gdb_print_insn_a29k (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return print_insn_big_a29k (memaddr, info);
+  else
+    return print_insn_little_a29k (memaddr, info);
+}
+
+enum a29k_processor_types processor_type = a29k_unknown;
+
+void
+a29k_get_processor_type ()
+{
+  unsigned int cfg_reg = (unsigned int) read_register (CFG_REGNUM);
+
+  /* Most of these don't have freeze mode.  */
+  processor_type = a29k_no_freeze_mode;
+
+  switch ((cfg_reg >> 28) & 0xf)
+    {
+    case 0:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29000");
+      break;
+    case 1:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29005");
+      break;
+    case 2:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29050");
+      processor_type = a29k_freeze_mode;
+      break;
+    case 3:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29035");
+      break;
+    case 4:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29030");
+      break;
+    case 5:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am2920*");
+      break;
+    case 6:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am2924*");
+      break;
+    case 7:
+      fprintf_filtered (gdb_stderr, "Remote debugging an Am29040");
+      break;
+    default:
+      fprintf_filtered (gdb_stderr, "Remote debugging an unknown Am29k\n");
+      /* Don't bother to print the revision.  */
+      return;
+    }
+  fprintf_filtered (gdb_stderr, " revision %c\n", 'A' + ((cfg_reg >> 24) & 0x0f));
+}
+
+#ifdef GET_LONGJMP_TARGET
+/* Figure out where the longjmp will land.  We expect that we have just entered
+  longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  lr2 (LR2_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+int
+get_longjmp_target(pc)
+     CORE_ADDR *pc;
+{
+  CORE_ADDR jb_addr;
+  char buf[sizeof(CORE_ADDR)];
+
+  jb_addr = read_register(LR2_REGNUM);
+
+  if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, (char *) buf,
+                         sizeof(CORE_ADDR)))
+    return 0;
+
+  *pc = extract_address ((PTR) buf, sizeof(CORE_ADDR));
+  return 1;
+}
+#endif /* GET_LONGJMP_TARGET */
+
+void
+_initialize_a29k_tdep ()
+{
+  extern CORE_ADDR text_end;
+
+  tm_print_insn = gdb_print_insn_a29k;
+
+  /* FIXME, there should be a way to make a CORE_ADDR variable settable. */
+  add_show_from_set
+    (add_set_cmd ("rstack_high_address", class_support, var_uinteger,
+		  (char *)&rstack_high_address,
+		  "Set top address in memory of the register stack.\n\
+Attempts to access registers saved above this address will be ignored\n\
+or will produce the value -1.", &setlist),
+     &showlist);
+
+  /* FIXME, there should be a way to make a CORE_ADDR variable settable. */
+  add_show_from_set
+    (add_set_cmd ("call_scratch_address", class_support, var_uinteger,
+		  (char *)&text_end,
+"Set address in memory where small amounts of RAM can be used\n\
+when making function calls into the inferior.", &setlist),
+     &showlist);
+}
diff --git a/gdb/a68v-nat.c b/gdb/a68v-nat.c
new file mode 100644
index 0000000..95bb3c8
--- /dev/null
+++ b/gdb/a68v-nat.c
@@ -0,0 +1,123 @@
+/* Host-dependent code for Apollo-68ks for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+
+#ifndef _ISP__M68K
+#define _ISP__M68K 1
+#endif
+
+#include <ptrace.h>
+
+extern int errno;
+
+void
+fetch_inferior_registers (ignored)
+    int ignored;
+{
+  struct ptrace_$data_regs_m68k inferior_registers;
+  struct ptrace_$floating_regs_m68k inferior_fp_registers;
+  struct ptrace_$control_regs_m68k inferior_control_registers;
+  extern char registers[];
+
+  ptrace_$init_control(&inferior_control_registers);
+  inferior_fp_registers.size = sizeof(inferior_fp_registers);
+
+  registers_fetched ();
+  
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers,
+	  ptrace_$data_set,
+	  (PTRACE_ARG3_TYPE) &inferior_registers,
+	  ptrace_$data_set);
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	(PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	ptrace_$floating_set_m68k,
+	(PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	ptrace_$floating_set_m68k);
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	(PTRACE_ARG3_TYPE) &inferior_control_registers,
+	ptrace_$control_set_m68k,
+	(PTRACE_ARG3_TYPE) &inferior_control_registers,
+	ptrace_$control_set_m68k);
+
+  bcopy (&inferior_registers, registers, 16 * 4);
+  bcopy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	 sizeof inferior_fp_registers.regs);
+  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_control_registers.sr;
+  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_control_registers.pc;
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct ptrace_$data_regs_m68k inferior_registers;
+  struct ptrace_$floating_regs_m68k inferior_fp_registers;
+  struct ptrace_$control_regs_m68k inferior_control_registers;
+  extern char registers[];
+
+  ptrace_$init_control(&inferior_control_registers);
+  inferior_fp_registers.size = sizeof(inferior_fp_registers);
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	(PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	ptrace_$floating_set_m68k,
+	(PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	ptrace_$floating_set_m68k);
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	(PTRACE_ARG3_TYPE) &inferior_control_registers,
+	ptrace_$control_set_m68k,
+	(PTRACE_ARG3_TYPE) &inferior_control_registers,
+	ptrace_$control_set_m68k);
+
+  bcopy (registers, &inferior_registers, sizeof(inferior_registers));
+
+  bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], inferior_fp_registers.regs,
+	 sizeof inferior_fp_registers.regs);
+
+  inferior_control_registers.sr = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
+  inferior_control_registers.pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
+
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers,
+	  ptrace_$data_set_m68k,
+	  (PTRACE_ARG3_TYPE) &inferior_registers,
+	  ptrace_$data_set_m68k);
+
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	  ptrace_$floating_set_m68k,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	  ptrace_$floating_set_m68k);
+
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_control_registers,
+	  ptrace_$control_set_m68k,
+	  (PTRACE_ARG3_TYPE) &inferior_control_registers,
+	  ptrace_$control_set_m68k);
+}
diff --git a/gdb/abug-rom.c b/gdb/abug-rom.c
new file mode 100644
index 0000000..97ff0f8
--- /dev/null
+++ b/gdb/abug-rom.c
@@ -0,0 +1,169 @@
+/* Remote debugging interface for ABug Rom monitor for GDB, the GNU debugger.
+   Copyright 1995, 1996, 1998 Free Software Foundation, Inc.
+
+   Written by Rob Savoye of Cygnus Support
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+/* Prototypes for local functions. */
+
+static void abug_open PARAMS ((char *args, int from_tty));
+
+static void
+abug_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+
+  switch (regname[0])
+    {
+    case 'S':
+      if (regname[1] != 'R')
+	return;
+      regno = PS_REGNUM;
+      break;
+    case 'P':
+      if (regname[1] != 'C')
+	return;
+      regno = PC_REGNUM;
+      break;
+    case 'D':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + D0_REGNUM;
+      break;
+    case 'A':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + A0_REGNUM;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/*
+ * This array of registers needs to match the indexes used by GDB. The
+ * whole reason this exists is because the various ROM monitors use
+ * different names than GDB does, and don't support all the
+ * registers either. So, typing "info reg sp" becomes an "A7".
+ */
+
+static char *abug_regnames[NUM_REGS] =
+{
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+  "PC",
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops abug_ops;
+
+static char *abug_inits[] = {"\r", NULL};
+
+static struct monitor_ops abug_cmds ;
+
+static void 
+init_abug_cmds(void)
+{
+  abug_cmds.flags =   MO_CLR_BREAK_USES_ADDR;
+  abug_cmds.init =   abug_inits;			/* Init strings */
+  abug_cmds.cont =   "g\r";			/* continue command */
+  abug_cmds.step =   "t\r";			/* single step */
+  abug_cmds.stop =   NULL;				/* interrupt command */
+  abug_cmds.set_break =   "br %x\r";			/* set a breakpoint */
+  abug_cmds.clr_break =   "nobr %x\r";			/* clear a breakpoint */
+  abug_cmds.clr_all_break =   "nobr\r";			/* clear all breakpoints */
+  abug_cmds.fill =   "bf %x:%x %x;b\r";		/* fill (start count val) */
+  abug_cmds.setmem.cmdb =     "ms %x %02x\r";		/* setmem.cmdb (addr, value) */
+  abug_cmds.setmem.cmdw =     "ms %x %04x\r";		/* setmem.cmdw (addr, value) */
+  abug_cmds.setmem.cmdl =     "ms %x %08x\r";		/* setmem.cmdl (addr, value) */
+  abug_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  abug_cmds.setmem.resp_delim =     NULL;			/* setreg.resp_delim */
+  abug_cmds.setmem.term =     NULL;			/* setreg.term */
+  abug_cmds.setmem.term_cmd =     NULL;			/* setreg.term_cmd */
+  abug_cmds.getmem.cmdb =     "md %x:%x;b\r";		/* getmem.cmdb (addr, len) */
+  abug_cmds.getmem.cmdw =     "md %x:%x;b\r";		/* getmem.cmdw (addr, len) */
+  abug_cmds.getmem.cmdl =     "md %x:%x;b\r";		/* getmem.cmdl (addr, len) */
+  abug_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, len) */
+  abug_cmds.getmem.resp_delim =     " ";			/* getmem.resp_delim */
+  abug_cmds.getmem.term =     NULL;			/* getmem.term */
+  abug_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+  abug_cmds.setreg.cmd =     "rm %s %x\r";		/* setreg.cmd (name, value) */
+  abug_cmds.setreg.resp_delim =     "=";			/* setreg.resp_delim */
+  abug_cmds.setreg.term =     "? ";			/* setreg.term */
+  abug_cmds.setreg.term_cmd =     ".\r"	;		/* setreg.term_cmd */
+  abug_cmds.getreg.cmd =     "rm %s\r";			/* getreg.cmd (name) */
+  abug_cmds.getreg.resp_delim =     "=";			/* getreg.resp_delim */
+  abug_cmds.getreg.term =     "? ";			/* getreg.term */
+  abug_cmds.getreg.term_cmd =     ".\r"	;		/* getreg.term_cmd */
+    abug_cmds.dump_registers =   "rd\r";			/* dump_registers */
+  abug_cmds.register_pattern =   "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  abug_cmds.supply_register =   abug_supply_register;	/* supply_register */
+  abug_cmds.load_routine =   NULL;				/* load_routine (defaults to SRECs) */
+  abug_cmds.load =   "lo 0\r";			/* download command */
+  abug_cmds.loadresp =   "\n";				/* load response */
+  abug_cmds.prompt =   "135Bug>";			/* monitor command prompt */
+  abug_cmds.line_term =   "\r";				/* end-of-line terminator */
+  abug_cmds.cmd_end =   NULL;				/* optional command terminator */
+  abug_cmds.target =   &abug_ops;			/* target operations */
+  abug_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  abug_cmds.regnames =   abug_regnames;		/* registers names */
+  abug_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+}; 
+
+static void
+abug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &abug_cmds, from_tty);
+}
+
+void
+_initialize_abug_rom ()
+{
+  init_abug_cmds() ;
+  init_monitor_ops (&abug_ops);
+
+  abug_ops.to_shortname = "abug";
+  abug_ops.to_longname = "ABug monitor";
+  abug_ops.to_doc = "Debug via the ABug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  abug_ops.to_open = abug_open;
+
+  add_target (&abug_ops);
+}
diff --git a/gdb/acconfig.h b/gdb/acconfig.h
new file mode 100644
index 0000000..9ad5020
--- /dev/null
+++ b/gdb/acconfig.h
@@ -0,0 +1,95 @@
+
+/* Whether malloc must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_MALLOC
+
+/* Whether realloc must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_REALLOC
+
+/* Whether free must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_FREE
+
+/* Whether strerror must be declared even if <string.h> is included.  */
+#undef NEED_DECLARATION_STRERROR
+@TOP@
+
+/* Define if pstatus_t type is available */
+#undef HAVE_PSTATUS_T
+
+/* Define if prrun_t type is available */
+#undef HAVE_PRRUN_T
+
+/* Define if fpregset_t type is available. */
+#undef HAVE_FPREGSET_T
+
+/* Define if gregset_t type is available. */
+#undef HAVE_GREGSET_T
+
+/* Define if ioctl argument PIOCSET is available. */
+#undef HAVE_PROCFS_PIOCSET
+
+/* /proc PID entries are directories containing the files
+   ctl as map status */
+#undef HAVE_MULTIPLE_PROC_FDS
+
+/* Define if the `long long' type works.  */
+#undef CC_HAS_LONG_LONG
+
+/* Define if the "ll" format works to print long long ints. */
+#undef PRINTF_HAS_LONG_LONG
+
+/* Define if the "%Lg" format works to print long doubles. */
+#undef PRINTF_HAS_LONG_DOUBLE
+
+/* Define if the "%Lg" format works to scan long doubles. */
+#undef SCANF_HAS_LONG_DOUBLE
+
+/* Define if using Solaris thread debugging.  */
+#undef HAVE_THREAD_DB_LIB
+
+/* Define on a GNU/Linux system to work around problems in sys/procfs.h.  */
+#undef START_INFERIOR_TRAPS_EXPECTED
+#undef sys_quotactl
+
+/* Define if you have HPUX threads */
+#undef HAVE_HPUX_THREAD_SUPPORT
+
+/* Define if you want to use the memory mapped malloc package (mmalloc). */
+#undef USE_MMALLOC
+
+/* Define if the runtime uses a routine from mmalloc before gdb has a chance
+   to initialize mmalloc, and we want to force checking to be used anyway.
+   This may cause spurious memory corruption messages if the runtime tries
+   to explicitly deallocate that memory when gdb calls exit. */
+#undef MMCHECK_FORCE
+
+/* Define to 1 if NLS is requested.  */
+#undef ENABLE_NLS
+
+/* Define as 1 if you have catgets and don't want to use GNU gettext.  */
+#undef HAVE_CATGETS
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
+#undef HAVE_GETTEXT
+
+/* Define as 1 if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if your locale.h file contains LC_MESSAGES.  */
+#undef HAVE_LC_MESSAGES
+
+/* Define if you want to use the full-screen terminal user interface.  */
+#undef TUI
+
+/* Define if <proc_service.h> on solaris uses int instead of
+   size_t, and assorted other type changes. */
+#undef PROC_SERVICE_IS_OLD
+
+/* If you want to specify a default CPU variant, define this to be its
+   name, as a C string.  */
+#undef TARGET_CPU_DEFAULT
+
+/* Set to true if the save_state_t structure is present */
+#define HAVE_STRUCT_SAVE_STATE_T 0
+
+/* Set to true if the save_state_t structure has the ss_wide member */
+#define HAVE_STRUCT_MEMBER_SS_WIDE 0
diff --git a/gdb/acinclude.m4 b/gdb/acinclude.m4
new file mode 100644
index 0000000..43a0b0d
--- /dev/null
+++ b/gdb/acinclude.m4
@@ -0,0 +1,861 @@
+dnl written by Rob Savoye <rob@cygnus.com> for Cygnus Support
+dnl major rewriting for Tcl 7.5 by Don Libes <libes@nist.gov>
+
+dnl gdb/configure.in uses BFD_NEED_DECLARATION, so get its definition.
+sinclude(../bfd/acinclude.m4)
+
+dnl This gets the standard macros, like the TCL, TK, etc ones.
+sinclude(../config/acinclude.m4)
+
+dnl CYGNUS LOCAL: This gets the right posix flag for gcc
+AC_DEFUN(CY_AC_TCL_LYNX_POSIX,
+[AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AC_PROG_CPP])
+AC_MSG_CHECKING([if running LynxOS])
+AC_CACHE_VAL(ac_cv_os_lynx,
+[AC_EGREP_CPP(yes,
+[/*
+ * The old Lynx "cc" only defines "Lynx", but the newer one uses "__Lynx__"
+ */
+#if defined(__Lynx__) || defined(Lynx)
+yes
+#endif
+], ac_cv_os_lynx=yes, ac_cv_os_lynx=no)])
+#
+if test "$ac_cv_os_lynx" = "yes" ; then
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(LYNX)
+  AC_MSG_CHECKING([whether -mposix or -X is available])
+  AC_CACHE_VAL(ac_cv_c_posix_flag,
+  [AC_TRY_COMPILE(,[
+  /*
+   * This flag varies depending on how old the compiler is.
+   * -X is for the old "cc" and "gcc" (based on 1.42).
+   * -mposix is for the new gcc (at least 2.5.8).
+   */
+  #if defined(__GNUC__) && __GNUC__ >= 2
+  choke me
+  #endif
+  ], ac_cv_c_posix_flag=" -mposix", ac_cv_c_posix_flag=" -X")])
+  CC="$CC $ac_cv_c_posix_flag"
+  AC_MSG_RESULT($ac_cv_c_posix_flag)
+  else
+  AC_MSG_RESULT(no)
+fi
+])
+
+#
+# Sometimes the native compiler is a bogus stub for gcc or /usr/ucb/cc. This
+# makes configure think it's cross compiling. If --target wasn't used, then
+# we can't configure, so something is wrong. We don't use the cache
+# here cause if somebody fixes their compiler install, we want this to work.
+AC_DEFUN(CY_AC_C_WORKS,
+[# If we cannot compile and link a trivial program, we can't expect anything to work
+AC_MSG_CHECKING(whether the compiler ($CC) actually works)
+AC_TRY_COMPILE(, [/* don't need anything here */],
+        c_compiles=yes, c_compiles=no)
+
+AC_TRY_LINK(, [/* don't need anything here */],
+        c_links=yes, c_links=no)
+
+if test x"${c_compiles}" = x"no" ; then
+  AC_MSG_ERROR(the native compiler is broken and won't compile.)
+fi
+
+if test x"${c_links}" = x"no" ; then
+  AC_MSG_ERROR(the native compiler is broken and won't link.)
+fi
+AC_MSG_RESULT(yes)
+])
+
+AC_DEFUN(CY_AC_PATH_TCLH, [
+#
+# Ok, lets find the tcl source trees so we can use the headers
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9. We also look for just tcl. We have to
+# be careful that we don't match stuff like tclX by accident.
+# the alternative search directory is involked by --with-tclinclude
+#
+
+no_tcl=true
+AC_MSG_CHECKING(for Tcl private headers. dir=${configdir})
+AC_ARG_WITH(tclinclude, [  --with-tclinclude=DIR   Directory where tcl private headers are], with_tclinclude=${withval})
+AC_CACHE_VAL(ac_cv_c_tclh,[
+# first check to see if --with-tclinclude was specified
+if test x"${with_tclinclude}" != x ; then
+  if test -f ${with_tclinclude}/tclInt.h ; then
+    ac_cv_c_tclh=`(cd ${with_tclinclude}; pwd)`
+  elif test -f ${with_tclinclude}/generic/tclInt.h ; then
+    ac_cv_c_tclh=`(cd ${with_tclinclude}/generic; pwd)`
+  else
+    AC_MSG_ERROR([${with_tclinclude} directory doesn't contain private headers])
+  fi
+fi
+
+# next check if it came with Tcl configuration file
+if test x"${ac_cv_c_tclconfig}" = x ; then
+  if test -f $ac_cv_c_tclconfig/../generic/tclInt.h ; then
+    ac_cv_c_tclh=`(cd $ac_cv_c_tclconfig/..; pwd)`
+  fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[7-9]]* 2>/dev/null` \
+		${srcdir}/../../tcl \
+		`ls -dr ${srcdir}/../../tcl[[7-9]]* 2>/dev/null` \
+		${srcdir}/../../../tcl \
+		`ls -dr ${srcdir}/../../../tcl[[7-9]]* 2>/dev/null ` ; do
+    if test -f $i/generic/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tcl[[7-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tcl[[7-9]]* 2>/dev/null` \
+		/usr/local/src/tcl \
+		/usr/local/lib/tcl \
+		${prefix}/include ; do
+    if test -f $i/generic/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tclh}" = x ; then
+   AC_HEADER_CHECK(tclInt.h, ac_cv_c_tclh=installed, ac_cv_c_tclh="")
+fi
+])
+if test x"${ac_cv_c_tclh}" = x ; then
+  TCLHDIR="# no Tcl private headers found"
+  AC_MSG_ERROR([Can't find Tcl private headers])
+fi
+if test x"${ac_cv_c_tclh}" != x ; then
+  no_tcl=""
+  if test x"${ac_cv_c_tclh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TCLHDIR=""
+  else
+    AC_MSG_RESULT([found in ${ac_cv_c_tclh}])
+    # this hack is cause the TCLHDIR won't print if there is a "-I" in it.
+    TCLHDIR="-I${ac_cv_c_tclh}"
+  fi
+fi
+
+AC_SUBST(TCLHDIR)
+])
+
+
+AC_DEFUN(CY_AC_PATH_TCLCONFIG, [
+#
+# Ok, lets find the tcl configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-tclconfig
+#
+
+if test x"${no_tcl}" = x ; then
+  # we reset no_tcl in case something fails here
+  no_tcl=true
+  AC_ARG_WITH(tclconfig, [  --with-tclconfig=DIR    Directory containing tcl configuration (tclConfig.sh)],
+         with_tclconfig=${withval})
+  AC_MSG_CHECKING([for Tcl configuration])
+  AC_CACHE_VAL(ac_cv_c_tclconfig,[
+
+  # First check to see if --with-tclconfig was specified.
+  if test x"${with_tclconfig}" != x ; then
+    if test -f "${with_tclconfig}/tclConfig.sh" ; then
+      ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tcl installation
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in \
+		../tcl \
+		`ls -dr ../tcl[[7-9]]* 2>/dev/null` \
+		../../tcl \
+		`ls -dr ../../tcl[[7-9]]* 2>/dev/null` \
+		../../../tcl \
+		`ls -dr ../../../tcl[[7-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[7-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    TCLCONFIG="# no Tcl configs found"
+    AC_MSG_WARN(Can't find Tcl configuration definitions)
+  else
+    no_tcl=
+    TCLCONFIG=${ac_cv_c_tclconfig}/tclConfig.sh
+    AC_MSG_RESULT(found $TCLCONFIG)
+  fi
+fi
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TCLCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TCLCONFIG, [
+    . $TCLCONFIG
+
+    AC_SUBST(TCL_VERSION)
+    AC_SUBST(TCL_MAJOR_VERSION)
+    AC_SUBST(TCL_MINOR_VERSION)
+    AC_SUBST(TCL_CC)
+    AC_SUBST(TCL_DEFS)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_LIB_FILE)
+
+dnl don't export, not used outside of configure
+dnl     AC_SUBST(TCL_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_EXEC_PREFIX)
+
+    AC_SUBST(TCL_SHLIB_CFLAGS)
+    AC_SUBST(TCL_SHLIB_LD)
+dnl don't export, not used outside of configure
+    AC_SUBST(TCL_SHLIB_LD_LIBS)
+    AC_SUBST(TCL_SHLIB_SUFFIX)
+dnl not used, don't export to save symbols
+    AC_SUBST(TCL_DL_LIBS)
+    AC_SUBST(TCL_LD_FLAGS)
+dnl don't export, not used outside of configure
+    AC_SUBST(TCL_LD_SEARCH_FLAGS)
+    AC_SUBST(TCL_COMPAT_OBJS)
+    AC_SUBST(TCL_RANLIB)
+    AC_SUBST(TCL_BUILD_LIB_SPEC)
+    AC_SUBST(TCL_LIB_SPEC)
+    AC_SUBST(TCL_LIB_VERSIONS_OK)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_SHARED_LIB_SUFFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_UNSHARED_LIB_SUFFIX)
+])
+
+# Warning: Tk definitions are very similar to Tcl definitions but
+# are not precisely the same.  There are a couple of differences,
+# so don't do changes to Tcl thinking you can cut and paste it do 
+# the Tk differences and later simply substitute "Tk" for "Tcl".
+# Known differences:
+#  - Acceptable Tcl major version #s is 7-9 while Tk is 4-9
+#  - Searching for Tcl includes looking for tclInt.h, Tk looks for tk.h
+#  - Computing major/minor versions is different because Tk depends on
+#    headers to Tcl, Tk, and X.
+#  - Symbols in tkConfig.sh are different than tclConfig.sh
+#  - Acceptable for Tk to be missing but not Tcl.
+
+AC_DEFUN(CY_AC_PATH_TKH, [
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others.  Same logic is used when choosing library
+# and again with Tcl. The search order is the best place to look first, then in
+# decreasing significance. The loop breaks if the trigger file is found.
+# Note the gross little conversion here of srcdir by cd'ing to the found
+# directory. This converts the path from a relative to an absolute, so
+# recursive cache variables for the path will work right. We check all
+# the possible paths in one loop rather than many seperate loops to speed
+# things up.
+# the alternative search directory is involked by --with-tkinclude
+#
+no_tk=true
+AC_MSG_CHECKING(for Tk private headers)
+AC_ARG_WITH(tkinclude, [  --with-tkinclude=DIR    Directory where tk private headers are], with_tkinclude=${withval})
+AC_CACHE_VAL(ac_cv_c_tkh,[
+# first check to see if --with-tkinclude was specified
+if test x"${with_tkinclude}" != x ; then
+  if test -f ${with_tkinclude}/tk.h ; then
+    ac_cv_c_tkh=`(cd ${with_tkinclude}; pwd)`
+  elif test -f ${with_tkinclude}/generic/tk.h ; then
+    ac_cv_c_tkh=`(cd ${with_tkinclude}/generic; pwd)`
+  else
+    AC_MSG_ERROR([${with_tkinclude} directory doesn't contain private headers])
+  fi
+fi
+
+# next check if it came with Tk configuration file
+if test x"${ac_cv_c_tkconfig}" = x ; then
+  if test -f $ac_cv_c_tkconfig/../generic/tk.h ; then
+    ac_cv_c_tkh=`(cd $ac_cv_c_tkconfig/..; pwd)`
+  fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[4-9]]* 2>/dev/null` \
+		${srcdir}/../../tk \
+		`ls -dr ${srcdir}/../../tk[[4-9]]* 2>/dev/null` \
+		${srcdir}/../../../tk \
+		`ls -dr ${srcdir}/../../../tk[[4-9]]* 2>/dev/null ` ; do
+    if test -f $i/generic/tk.h ; then
+      ac_cv_c_tkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tk[[4-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tk[[4-9]]* 2>/dev/null` \
+		/usr/local/src/tk \
+		/usr/local/lib/tk \
+		${prefix}/include ; do
+    if test -f $i/generic/tk.h ; then
+      ac_cv_c_tkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tkh}" = x ; then
+   AC_HEADER_CHECK(tk.h, ac_cv_c_tkh=installed, ac_cv_c_tkh="")
+fi
+])
+if test x"${ac_cv_c_tkh}" != x ; then
+  no_tk=""
+  if test x"${ac_cv_c_tkh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TKHDIR=""
+  else
+    AC_MSG_RESULT([found in ${ac_cv_c_tkh}])
+    # this hack is cause the TKHDIR won't print if there is a "-I" in it.
+    TKHDIR="-I${ac_cv_c_tkh}"
+  fi
+else
+  TKHDIR="# no Tk directory found"
+  AC_MSG_WARN([Can't find Tk private headers])
+  no_tk=true
+fi
+
+AC_SUBST(TKHDIR)
+])
+
+
+AC_DEFUN(CY_AC_PATH_TKCONFIG, [
+#
+# Ok, lets find the tk configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-tkconfig
+#
+
+if test x"${no_tk}" = x ; then
+  # we reset no_tk in case something fails here
+  no_tk=true
+  AC_ARG_WITH(tkconfig, [  --with-tkconfig=DIR     Directory containing tk configuration (tkConfig.sh)],
+         with_tkconfig=${withval})
+  AC_MSG_CHECKING([for Tk configuration])
+  AC_CACHE_VAL(ac_cv_c_tkconfig,[
+
+  # First check to see if --with-tkconfig was specified.
+  if test x"${with_tkconfig}" != x ; then
+    if test -f "${with_tkconfig}/tkConfig.sh" ; then
+      ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tk library
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in \
+		../tk \
+		`ls -dr ../tk[[4-9]]* 2>/dev/null` \
+		../../tk \
+		`ls -dr ../../tk[[4-9]]* 2>/dev/null` \
+		../../../tk \
+		`ls -dr ../../../tk[[4-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[4-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    TKCONFIG="# no Tk configs found"
+    AC_MSG_WARN(Can't find Tk configuration definitions)
+  else
+    no_tk=
+    TKCONFIG=${ac_cv_c_tkconfig}/tkConfig.sh
+    AC_MSG_RESULT(found $TKCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TKCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TKCONFIG, [
+    if test -f "$TKCONFIG" ; then
+      . $TKCONFIG
+    fi
+
+    AC_SUBST(TK_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(TK_MAJOR_VERSION)
+dnl    AC_SUBST(TK_MINOR_VERSION)
+    AC_SUBST(TK_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(TK_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(TK_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TK_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TK_EXEC_PREFIX)
+
+    AC_SUBST(TK_BUILD_INCLUDES)
+    AC_SUBST(TK_XINCLUDES)
+    AC_SUBST(TK_XLIBSW)
+    AC_SUBST(TK_BUILD_LIB_SPEC)
+    AC_SUBST(TK_LIB_SPEC)
+])
+
+# check for Itcl headers. 
+
+AC_DEFUN(CY_AC_PATH_ITCLCONFIG, [
+#
+# Ok, lets find the itcl configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itclconfig
+#
+
+if test x"${no_itcl}" = x ; then
+  # we reset no_itcl in case something fails here
+  no_itcl=true
+  AC_ARG_WITH(itclconfig, [  --with-itclconfig           directory containing itcl configuration (itclConfig.sh)],
+         with_itclconfig=${withval})
+  AC_MSG_CHECKING([for Itcl configuration])
+  AC_CACHE_VAL(ac_cv_c_itclconfig,[
+
+  # First check to see if --with-itclconfig was specified.
+  if test x"${with_itclconfig}" != x ; then
+    if test -f "${with_itclconfig}/itclConfig.sh" ; then
+      ac_cv_c_itclconfig=`(cd ${with_itclconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_itclconfig} directory doesn't contain itclConfig.sh])
+    fi
+  fi
+
+  # then check for a private Itcl library
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in \
+		../itcl/itcl \
+		`ls -dr ../itcl[[4-9]]*/itcl 2>/dev/null` \
+		../../itcl \
+		`ls -dr ../../itcl[[4-9]]*/itcl 2>/dev/null` \
+		../../../itcl \
+		`ls -dr ../../../itcl[[4-9]]*/itcl 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in \
+		${srcdir}/../itcl/itcl \
+		`ls -dr ${srcdir}/../itcl[[4-9]]*/itcl 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    ITCLCONFIG="# no Itcl configs found"
+    AC_MSG_WARN(Can't find Itcl configuration definitions)
+  else
+    no_itcl=
+    ITCLCONFIG=${ac_cv_c_itclconfig}/itclConfig.sh
+    AC_MSG_RESULT(found $ITCLCONFIG)
+  fi
+fi
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_ITCLCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_ITCLCONFIG, [
+    if test -f "$ITCLCONFIG" ; then
+      . $ITCLCONFIG
+    fi
+
+    AC_SUBST(ITCL_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(ITCL_MAJOR_VERSION)
+dnl    AC_SUBST(ITCL_MINOR_VERSION)
+    AC_SUBST(ITCL_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(ITCL_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(ITCL_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITCL_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITCL_EXEC_PREFIX)
+
+    AC_SUBST(ITCL_BUILD_INCLUDES)
+    AC_SUBST(ITCL_BUILD_LIB_SPEC)
+    AC_SUBST(ITCL_LIB_SPEC)
+])
+
+# check for Itcl headers. 
+
+AC_DEFUN(CY_AC_PATH_ITCLH, [
+AC_MSG_CHECKING(for Itcl private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_itclh}" = x ; then
+  for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itcl; do
+    if test -f $i/generic/itcl.h ; then
+      ac_cv_c_itclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_itclh}" = x ; then
+  ITCLHDIR="# no Itcl private headers found"
+  AC_MSG_ERROR([Can't find Itcl private headers])
+fi
+if test x"${ac_cv_c_itclh}" != x ; then
+     ITCLHDIR="-I${ac_cv_c_itclh}"
+fi
+# should always be here
+#     ITCLLIB="../itcl/itcl/unix/libitcl.a"
+AC_SUBST(ITCLHDIR)
+#AC_SUBST(ITCLLIB)
+])
+
+
+AC_DEFUN(CY_AC_PATH_ITKCONFIG, [
+#
+# Ok, lets find the itk configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_itk}" = x ; then
+  # we reset no_itk in case something fails here
+  no_itk=true
+  AC_ARG_WITH(itkconfig, [  --with-itkconfig           directory containing itk configuration (itkConfig.sh)],
+         with_itkconfig=${withval})
+  AC_MSG_CHECKING([for Itk configuration])
+  AC_CACHE_VAL(ac_cv_c_itkconfig,[
+
+  # First check to see if --with-itkconfig was specified.
+  if test x"${with_itkconfig}" != x ; then
+    if test -f "${with_itkconfig}/itkConfig.sh" ; then
+      ac_cv_c_itkconfig=`(cd ${with_itkconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_itkconfig} directory doesn't contain itkConfig.sh])
+    fi
+  fi
+
+  # then check for a private Itk library
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in \
+		../itcl/itk \
+		`ls -dr ../itcl[[4-9]]*/itk 2>/dev/null` \
+		../../itk \
+		`ls -dr ../../itcl[[4-9]]*/itk 2>/dev/null` \
+		../../../itk \
+		`ls -dr ../../../itcl[[4-9]]*/itk 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in \
+		${srcdir}/../itcl/itk \
+		`ls -dr ${srcdir}/../itcl[[4-9]]*/itk 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    ITKCONFIG="# no Itk configs found"
+    AC_MSG_WARN(Can't find Itk configuration definitions)
+  else
+    no_itk=
+    ITKCONFIG=${ac_cv_c_itkconfig}/itkConfig.sh
+    AC_MSG_RESULT(found $ITKCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_ITKCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_ITKCONFIG, [
+    if test -f "$ITKCONFIG" ; then
+      . $ITKCONFIG
+    fi
+
+    AC_SUBST(ITK_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(ITK_MAJOR_VERSION)
+dnl    AC_SUBST(ITK_MINOR_VERSION)
+    AC_SUBST(ITK_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(ITK_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(ITK_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITK_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITK_EXEC_PREFIX)
+
+    AC_SUBST(ITK_BUILD_INCLUDES)
+    AC_SUBST(ITK_BUILD_LIB_SPEC)
+    AC_SUBST(ITK_LIB_SPEC)
+])
+
+AC_DEFUN(CY_AC_PATH_ITKH, [
+AC_MSG_CHECKING(for Itk private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_itkh}" = x ; then
+  for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itk; do
+    if test -f $i/generic/itk.h ; then
+      ac_cv_c_itkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_itkh}" = x ; then
+  ITKHDIR="# no Itk private headers found"
+  AC_MSG_ERROR([Can't find Itk private headers])
+fi
+if test x"${ac_cv_c_itkh}" != x ; then
+     ITKHDIR="-I${ac_cv_c_itkh}"
+fi
+# should always be here
+#     ITKLIB="../itcl/itk/unix/libitk.a"
+AC_SUBST(ITKHDIR)
+#AC_SUBST(ITKLIB)
+])
+
+# check for Tix headers. 
+
+AC_DEFUN(CY_AC_PATH_TIXH, [
+AC_MSG_CHECKING(for Tix private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_tixh}" = x ; then
+  for i in ${srcdir}/../tix ${srcdir}/../../tix ${srcdir}/../../../tix ; do
+    if test -f $i/generic/tix.h ; then
+      ac_cv_c_tixh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_tixh}" = x ; then
+  TIXHDIR="# no Tix private headers found"
+  AC_MSG_ERROR([Can't find Tix private headers])
+fi
+if test x"${ac_cv_c_tixh}" != x ; then
+     TIXHDIR="-I${ac_cv_c_tixh}"
+fi
+AC_SUBST(TIXHDIR)
+])
+
+AC_DEFUN(CY_AC_PATH_TIXCONFIG, [
+#
+# Ok, lets find the tix configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_tix}" = x ; then
+  # we reset no_tix in case something fails here
+  no_tix=true
+  AC_ARG_WITH(tixconfig, [  --with-tixconfig           directory containing tix configuration (tixConfig.sh)],
+         with_tixconfig=${withval})
+  AC_MSG_CHECKING([for Tix configuration])
+  AC_CACHE_VAL(ac_cv_c_tixconfig,[
+
+  # First check to see if --with-tixconfig was specified.
+  if test x"${with_tixconfig}" != x ; then
+    if test -f "${with_tixconfig}/tixConfig.sh" ; then
+      ac_cv_c_tixconfig=`(cd ${with_tixconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tixconfig} directory doesn't contain tixConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tix library
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in \
+		../tix \
+		`ls -dr ../tix 2>/dev/null` \
+		../../tix \
+		`ls -dr ../../tix 2>/dev/null` \
+		../../../tix \
+		`ls -dr ../../../tix 2>/dev/null` ; do
+      echo "**** Looking at $i - with ${configdir}"
+      if test -f "$i/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      echo "**** Looking at $i"
+      if test -f "$i/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  echo "**** Other private locations"
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in \
+		${srcdir}/../tix \
+		`ls -dr ${srcdir}/../tix 2>/dev/null` ; do
+      echo "**** Looking at $i - with ${configdir}"
+      if test -f "$i/${configdir}/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    TIXCONFIG="# no Tix configs found"
+    AC_MSG_WARN(Can't find Tix configuration definitions)
+  else
+    no_tix=
+    TIXCONFIG=${ac_cv_c_tixconfig}/tixConfig.sh
+    AC_MSG_RESULT(found $TIXCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TIXCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TIXCONFIG, [
+    if test -f "$TIXCONFIG" ; then
+      . $TIXCONFIG
+    fi
+
+    AC_SUBST(TIX_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(TIX_MAJOR_VERSION)
+dnl    AC_SUBST(TIX_MINOR_VERSION)
+dnl    AC_SUBST(TIX_DEFS)
+
+dnl not used, don't export to save symbols
+dnl    dnl AC_SUBST(TIX_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(TIX_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TIX_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TIX_EXEC_PREFIX)
+
+dnl    AC_SUBST(TIX_BUILD_INCLUDES)
+    AC_SUBST(TIX_BUILD_LIB_SPEC)
+dnl    AC_SUBST(TIX_LIB_SPEC)
+])
diff --git a/gdb/aclocal.m4 b/gdb/aclocal.m4
new file mode 100644
index 0000000..4fd3658
--- /dev/null
+++ b/gdb/aclocal.m4
@@ -0,0 +1,1307 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl written by Rob Savoye <rob@cygnus.com> for Cygnus Support
+dnl major rewriting for Tcl 7.5 by Don Libes <libes@nist.gov>
+
+dnl gdb/configure.in uses BFD_NEED_DECLARATION, so get its definition.
+sinclude(../bfd/acinclude.m4)
+
+dnl This gets the standard macros, like the TCL, TK, etc ones.
+sinclude(../config/acinclude.m4)
+
+dnl CYGNUS LOCAL: This gets the right posix flag for gcc
+AC_DEFUN(CY_AC_TCL_LYNX_POSIX,
+[AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AC_PROG_CPP])
+AC_MSG_CHECKING([if running LynxOS])
+AC_CACHE_VAL(ac_cv_os_lynx,
+[AC_EGREP_CPP(yes,
+[/*
+ * The old Lynx "cc" only defines "Lynx", but the newer one uses "__Lynx__"
+ */
+#if defined(__Lynx__) || defined(Lynx)
+yes
+#endif
+], ac_cv_os_lynx=yes, ac_cv_os_lynx=no)])
+#
+if test "$ac_cv_os_lynx" = "yes" ; then
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(LYNX)
+  AC_MSG_CHECKING([whether -mposix or -X is available])
+  AC_CACHE_VAL(ac_cv_c_posix_flag,
+  [AC_TRY_COMPILE(,[
+  /*
+   * This flag varies depending on how old the compiler is.
+   * -X is for the old "cc" and "gcc" (based on 1.42).
+   * -mposix is for the new gcc (at least 2.5.8).
+   */
+  #if defined(__GNUC__) && __GNUC__ >= 2
+  choke me
+  #endif
+  ], ac_cv_c_posix_flag=" -mposix", ac_cv_c_posix_flag=" -X")])
+  CC="$CC $ac_cv_c_posix_flag"
+  AC_MSG_RESULT($ac_cv_c_posix_flag)
+  else
+  AC_MSG_RESULT(no)
+fi
+])
+
+#
+# Sometimes the native compiler is a bogus stub for gcc or /usr/ucb/cc. This
+# makes configure think it's cross compiling. If --target wasn't used, then
+# we can't configure, so something is wrong. We don't use the cache
+# here cause if somebody fixes their compiler install, we want this to work.
+AC_DEFUN(CY_AC_C_WORKS,
+[# If we cannot compile and link a trivial program, we can't expect anything to work
+AC_MSG_CHECKING(whether the compiler ($CC) actually works)
+AC_TRY_COMPILE(, [/* don't need anything here */],
+        c_compiles=yes, c_compiles=no)
+
+AC_TRY_LINK(, [/* don't need anything here */],
+        c_links=yes, c_links=no)
+
+if test x"${c_compiles}" = x"no" ; then
+  AC_MSG_ERROR(the native compiler is broken and won't compile.)
+fi
+
+if test x"${c_links}" = x"no" ; then
+  AC_MSG_ERROR(the native compiler is broken and won't link.)
+fi
+AC_MSG_RESULT(yes)
+])
+
+AC_DEFUN(CY_AC_PATH_TCLH, [
+#
+# Ok, lets find the tcl source trees so we can use the headers
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9. We also look for just tcl. We have to
+# be careful that we don't match stuff like tclX by accident.
+# the alternative search directory is involked by --with-tclinclude
+#
+
+no_tcl=true
+AC_MSG_CHECKING(for Tcl private headers. dir=${configdir})
+AC_ARG_WITH(tclinclude, [  --with-tclinclude=DIR   Directory where tcl private headers are], with_tclinclude=${withval})
+AC_CACHE_VAL(ac_cv_c_tclh,[
+# first check to see if --with-tclinclude was specified
+if test x"${with_tclinclude}" != x ; then
+  if test -f ${with_tclinclude}/tclInt.h ; then
+    ac_cv_c_tclh=`(cd ${with_tclinclude}; pwd)`
+  elif test -f ${with_tclinclude}/generic/tclInt.h ; then
+    ac_cv_c_tclh=`(cd ${with_tclinclude}/generic; pwd)`
+  else
+    AC_MSG_ERROR([${with_tclinclude} directory doesn't contain private headers])
+  fi
+fi
+
+# next check if it came with Tcl configuration file
+if test x"${ac_cv_c_tclconfig}" = x ; then
+  if test -f $ac_cv_c_tclconfig/../generic/tclInt.h ; then
+    ac_cv_c_tclh=`(cd $ac_cv_c_tclconfig/..; pwd)`
+  fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[7-9]]* 2>/dev/null` \
+		${srcdir}/../../tcl \
+		`ls -dr ${srcdir}/../../tcl[[7-9]]* 2>/dev/null` \
+		${srcdir}/../../../tcl \
+		`ls -dr ${srcdir}/../../../tcl[[7-9]]* 2>/dev/null ` ; do
+    if test -f $i/generic/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tcl[[7-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tcl[[7-9]]* 2>/dev/null` \
+		/usr/local/src/tcl \
+		/usr/local/lib/tcl \
+		${prefix}/include ; do
+    if test -f $i/generic/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tclh}" = x ; then
+   AC_HEADER_CHECK(tclInt.h, ac_cv_c_tclh=installed, ac_cv_c_tclh="")
+fi
+])
+if test x"${ac_cv_c_tclh}" = x ; then
+  TCLHDIR="# no Tcl private headers found"
+  AC_MSG_ERROR([Can't find Tcl private headers])
+fi
+if test x"${ac_cv_c_tclh}" != x ; then
+  no_tcl=""
+  if test x"${ac_cv_c_tclh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TCLHDIR=""
+  else
+    AC_MSG_RESULT([found in ${ac_cv_c_tclh}])
+    # this hack is cause the TCLHDIR won't print if there is a "-I" in it.
+    TCLHDIR="-I${ac_cv_c_tclh}"
+  fi
+fi
+
+AC_SUBST(TCLHDIR)
+])
+
+
+AC_DEFUN(CY_AC_PATH_TCLCONFIG, [
+#
+# Ok, lets find the tcl configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-tclconfig
+#
+
+if test x"${no_tcl}" = x ; then
+  # we reset no_tcl in case something fails here
+  no_tcl=true
+  AC_ARG_WITH(tclconfig, [  --with-tclconfig=DIR    Directory containing tcl configuration (tclConfig.sh)],
+         with_tclconfig=${withval})
+  AC_MSG_CHECKING([for Tcl configuration])
+  AC_CACHE_VAL(ac_cv_c_tclconfig,[
+
+  # First check to see if --with-tclconfig was specified.
+  if test x"${with_tclconfig}" != x ; then
+    if test -f "${with_tclconfig}/tclConfig.sh" ; then
+      ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tcl installation
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in \
+		../tcl \
+		`ls -dr ../tcl[[7-9]]* 2>/dev/null` \
+		../../tcl \
+		`ls -dr ../../tcl[[7-9]]* 2>/dev/null` \
+		../../../tcl \
+		`ls -dr ../../../tcl[[7-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[7-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tclConfig.sh" ; then
+        ac_cv_c_tclconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tclconfig}" = x ; then
+    TCLCONFIG="# no Tcl configs found"
+    AC_MSG_WARN(Can't find Tcl configuration definitions)
+  else
+    no_tcl=
+    TCLCONFIG=${ac_cv_c_tclconfig}/tclConfig.sh
+    AC_MSG_RESULT(found $TCLCONFIG)
+  fi
+fi
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TCLCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TCLCONFIG, [
+    . $TCLCONFIG
+
+    AC_SUBST(TCL_VERSION)
+    AC_SUBST(TCL_MAJOR_VERSION)
+    AC_SUBST(TCL_MINOR_VERSION)
+    AC_SUBST(TCL_CC)
+    AC_SUBST(TCL_DEFS)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_LIB_FILE)
+
+dnl don't export, not used outside of configure
+dnl     AC_SUBST(TCL_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_EXEC_PREFIX)
+
+    AC_SUBST(TCL_SHLIB_CFLAGS)
+    AC_SUBST(TCL_SHLIB_LD)
+dnl don't export, not used outside of configure
+    AC_SUBST(TCL_SHLIB_LD_LIBS)
+    AC_SUBST(TCL_SHLIB_SUFFIX)
+dnl not used, don't export to save symbols
+    AC_SUBST(TCL_DL_LIBS)
+    AC_SUBST(TCL_LD_FLAGS)
+dnl don't export, not used outside of configure
+    AC_SUBST(TCL_LD_SEARCH_FLAGS)
+    AC_SUBST(TCL_COMPAT_OBJS)
+    AC_SUBST(TCL_RANLIB)
+    AC_SUBST(TCL_BUILD_LIB_SPEC)
+    AC_SUBST(TCL_LIB_SPEC)
+    AC_SUBST(TCL_LIB_VERSIONS_OK)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_SHARED_LIB_SUFFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TCL_UNSHARED_LIB_SUFFIX)
+])
+
+# Warning: Tk definitions are very similar to Tcl definitions but
+# are not precisely the same.  There are a couple of differences,
+# so don't do changes to Tcl thinking you can cut and paste it do 
+# the Tk differences and later simply substitute "Tk" for "Tcl".
+# Known differences:
+#  - Acceptable Tcl major version #s is 7-9 while Tk is 4-9
+#  - Searching for Tcl includes looking for tclInt.h, Tk looks for tk.h
+#  - Computing major/minor versions is different because Tk depends on
+#    headers to Tcl, Tk, and X.
+#  - Symbols in tkConfig.sh are different than tclConfig.sh
+#  - Acceptable for Tk to be missing but not Tcl.
+
+AC_DEFUN(CY_AC_PATH_TKH, [
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others.  Same logic is used when choosing library
+# and again with Tcl. The search order is the best place to look first, then in
+# decreasing significance. The loop breaks if the trigger file is found.
+# Note the gross little conversion here of srcdir by cd'ing to the found
+# directory. This converts the path from a relative to an absolute, so
+# recursive cache variables for the path will work right. We check all
+# the possible paths in one loop rather than many seperate loops to speed
+# things up.
+# the alternative search directory is involked by --with-tkinclude
+#
+no_tk=true
+AC_MSG_CHECKING(for Tk private headers)
+AC_ARG_WITH(tkinclude, [  --with-tkinclude=DIR    Directory where tk private headers are], with_tkinclude=${withval})
+AC_CACHE_VAL(ac_cv_c_tkh,[
+# first check to see if --with-tkinclude was specified
+if test x"${with_tkinclude}" != x ; then
+  if test -f ${with_tkinclude}/tk.h ; then
+    ac_cv_c_tkh=`(cd ${with_tkinclude}; pwd)`
+  elif test -f ${with_tkinclude}/generic/tk.h ; then
+    ac_cv_c_tkh=`(cd ${with_tkinclude}/generic; pwd)`
+  else
+    AC_MSG_ERROR([${with_tkinclude} directory doesn't contain private headers])
+  fi
+fi
+
+# next check if it came with Tk configuration file
+if test x"${ac_cv_c_tkconfig}" = x ; then
+  if test -f $ac_cv_c_tkconfig/../generic/tk.h ; then
+    ac_cv_c_tkh=`(cd $ac_cv_c_tkconfig/..; pwd)`
+  fi
+fi
+
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[4-9]]* 2>/dev/null` \
+		${srcdir}/../../tk \
+		`ls -dr ${srcdir}/../../tk[[4-9]]* 2>/dev/null` \
+		${srcdir}/../../../tk \
+		`ls -dr ${srcdir}/../../../tk[[4-9]]* 2>/dev/null ` ; do
+    if test -f $i/generic/tk.h ; then
+      ac_cv_c_tkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tk[[4-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tk[[4-9]]* 2>/dev/null` \
+		/usr/local/src/tk \
+		/usr/local/lib/tk \
+		${prefix}/include ; do
+    if test -f $i/generic/tk.h ; then
+      ac_cv_c_tkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tkh}" = x ; then
+   AC_HEADER_CHECK(tk.h, ac_cv_c_tkh=installed, ac_cv_c_tkh="")
+fi
+])
+if test x"${ac_cv_c_tkh}" != x ; then
+  no_tk=""
+  if test x"${ac_cv_c_tkh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TKHDIR=""
+  else
+    AC_MSG_RESULT([found in ${ac_cv_c_tkh}])
+    # this hack is cause the TKHDIR won't print if there is a "-I" in it.
+    TKHDIR="-I${ac_cv_c_tkh}"
+  fi
+else
+  TKHDIR="# no Tk directory found"
+  AC_MSG_WARN([Can't find Tk private headers])
+  no_tk=true
+fi
+
+AC_SUBST(TKHDIR)
+])
+
+
+AC_DEFUN(CY_AC_PATH_TKCONFIG, [
+#
+# Ok, lets find the tk configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-tkconfig
+#
+
+if test x"${no_tk}" = x ; then
+  # we reset no_tk in case something fails here
+  no_tk=true
+  AC_ARG_WITH(tkconfig, [  --with-tkconfig=DIR     Directory containing tk configuration (tkConfig.sh)],
+         with_tkconfig=${withval})
+  AC_MSG_CHECKING([for Tk configuration])
+  AC_CACHE_VAL(ac_cv_c_tkconfig,[
+
+  # First check to see if --with-tkconfig was specified.
+  if test x"${with_tkconfig}" != x ; then
+    if test -f "${with_tkconfig}/tkConfig.sh" ; then
+      ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tk library
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in \
+		../tk \
+		`ls -dr ../tk[[4-9]]* 2>/dev/null` \
+		../../tk \
+		`ls -dr ../../tk[[4-9]]* 2>/dev/null` \
+		../../../tk \
+		`ls -dr ../../../tk[[4-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[4-9]]* 2>/dev/null` ; do
+      if test -f "$i/${configdir}/tkConfig.sh" ; then
+        ac_cv_c_tkconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tkconfig}" = x ; then
+    TKCONFIG="# no Tk configs found"
+    AC_MSG_WARN(Can't find Tk configuration definitions)
+  else
+    no_tk=
+    TKCONFIG=${ac_cv_c_tkconfig}/tkConfig.sh
+    AC_MSG_RESULT(found $TKCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TKCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TKCONFIG, [
+    if test -f "$TKCONFIG" ; then
+      . $TKCONFIG
+    fi
+
+    AC_SUBST(TK_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(TK_MAJOR_VERSION)
+dnl    AC_SUBST(TK_MINOR_VERSION)
+    AC_SUBST(TK_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(TK_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(TK_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TK_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TK_EXEC_PREFIX)
+
+    AC_SUBST(TK_BUILD_INCLUDES)
+    AC_SUBST(TK_XINCLUDES)
+    AC_SUBST(TK_XLIBSW)
+    AC_SUBST(TK_BUILD_LIB_SPEC)
+    AC_SUBST(TK_LIB_SPEC)
+])
+
+# check for Itcl headers. 
+
+AC_DEFUN(CY_AC_PATH_ITCLCONFIG, [
+#
+# Ok, lets find the itcl configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itclconfig
+#
+
+if test x"${no_itcl}" = x ; then
+  # we reset no_itcl in case something fails here
+  no_itcl=true
+  AC_ARG_WITH(itclconfig, [  --with-itclconfig           directory containing itcl configuration (itclConfig.sh)],
+         with_itclconfig=${withval})
+  AC_MSG_CHECKING([for Itcl configuration])
+  AC_CACHE_VAL(ac_cv_c_itclconfig,[
+
+  # First check to see if --with-itclconfig was specified.
+  if test x"${with_itclconfig}" != x ; then
+    if test -f "${with_itclconfig}/itclConfig.sh" ; then
+      ac_cv_c_itclconfig=`(cd ${with_itclconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_itclconfig} directory doesn't contain itclConfig.sh])
+    fi
+  fi
+
+  # then check for a private Itcl library
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in \
+		../itcl/itcl \
+		`ls -dr ../itcl[[4-9]]*/itcl 2>/dev/null` \
+		../../itcl \
+		`ls -dr ../../itcl[[4-9]]*/itcl 2>/dev/null` \
+		../../../itcl \
+		`ls -dr ../../../itcl[[4-9]]*/itcl 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    for i in \
+		${srcdir}/../itcl/itcl \
+		`ls -dr ${srcdir}/../itcl[[4-9]]*/itcl 2>/dev/null` ; do
+      if test -f "$i/itclConfig.sh" ; then
+        ac_cv_c_itclconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_itclconfig}" = x ; then
+    ITCLCONFIG="# no Itcl configs found"
+    AC_MSG_WARN(Can't find Itcl configuration definitions)
+  else
+    no_itcl=
+    ITCLCONFIG=${ac_cv_c_itclconfig}/itclConfig.sh
+    AC_MSG_RESULT(found $ITCLCONFIG)
+  fi
+fi
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_ITCLCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_ITCLCONFIG, [
+    if test -f "$ITCLCONFIG" ; then
+      . $ITCLCONFIG
+    fi
+
+    AC_SUBST(ITCL_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(ITCL_MAJOR_VERSION)
+dnl    AC_SUBST(ITCL_MINOR_VERSION)
+    AC_SUBST(ITCL_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(ITCL_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(ITCL_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITCL_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITCL_EXEC_PREFIX)
+
+    AC_SUBST(ITCL_BUILD_INCLUDES)
+    AC_SUBST(ITCL_BUILD_LIB_SPEC)
+    AC_SUBST(ITCL_LIB_SPEC)
+])
+
+# check for Itcl headers. 
+
+AC_DEFUN(CY_AC_PATH_ITCLH, [
+AC_MSG_CHECKING(for Itcl private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_itclh}" = x ; then
+  for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itcl; do
+    if test -f $i/generic/itcl.h ; then
+      ac_cv_c_itclh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_itclh}" = x ; then
+  ITCLHDIR="# no Itcl private headers found"
+  AC_MSG_ERROR([Can't find Itcl private headers])
+fi
+if test x"${ac_cv_c_itclh}" != x ; then
+     ITCLHDIR="-I${ac_cv_c_itclh}"
+fi
+# should always be here
+#     ITCLLIB="../itcl/itcl/unix/libitcl.a"
+AC_SUBST(ITCLHDIR)
+#AC_SUBST(ITCLLIB)
+])
+
+
+AC_DEFUN(CY_AC_PATH_ITKCONFIG, [
+#
+# Ok, lets find the itk configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_itk}" = x ; then
+  # we reset no_itk in case something fails here
+  no_itk=true
+  AC_ARG_WITH(itkconfig, [  --with-itkconfig           directory containing itk configuration (itkConfig.sh)],
+         with_itkconfig=${withval})
+  AC_MSG_CHECKING([for Itk configuration])
+  AC_CACHE_VAL(ac_cv_c_itkconfig,[
+
+  # First check to see if --with-itkconfig was specified.
+  if test x"${with_itkconfig}" != x ; then
+    if test -f "${with_itkconfig}/itkConfig.sh" ; then
+      ac_cv_c_itkconfig=`(cd ${with_itkconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_itkconfig} directory doesn't contain itkConfig.sh])
+    fi
+  fi
+
+  # then check for a private Itk library
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in \
+		../itcl/itk \
+		`ls -dr ../itcl[[4-9]]*/itk 2>/dev/null` \
+		../../itk \
+		`ls -dr ../../itcl[[4-9]]*/itk 2>/dev/null` \
+		../../../itk \
+		`ls -dr ../../../itcl[[4-9]]*/itk 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    for i in \
+		${srcdir}/../itcl/itk \
+		`ls -dr ${srcdir}/../itcl[[4-9]]*/itk 2>/dev/null` ; do
+      if test -f "$i/itkConfig.sh" ; then
+        ac_cv_c_itkconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_itkconfig}" = x ; then
+    ITKCONFIG="# no Itk configs found"
+    AC_MSG_WARN(Can't find Itk configuration definitions)
+  else
+    no_itk=
+    ITKCONFIG=${ac_cv_c_itkconfig}/itkConfig.sh
+    AC_MSG_RESULT(found $ITKCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_ITKCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_ITKCONFIG, [
+    if test -f "$ITKCONFIG" ; then
+      . $ITKCONFIG
+    fi
+
+    AC_SUBST(ITK_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(ITK_MAJOR_VERSION)
+dnl    AC_SUBST(ITK_MINOR_VERSION)
+    AC_SUBST(ITK_DEFS)
+
+dnl not used, don't export to save symbols
+    dnl AC_SUBST(ITK_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(ITK_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITK_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(ITK_EXEC_PREFIX)
+
+    AC_SUBST(ITK_BUILD_INCLUDES)
+    AC_SUBST(ITK_BUILD_LIB_SPEC)
+    AC_SUBST(ITK_LIB_SPEC)
+])
+
+AC_DEFUN(CY_AC_PATH_ITKH, [
+AC_MSG_CHECKING(for Itk private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_itkh}" = x ; then
+  for i in ${srcdir}/../itcl ${srcdir}/../../itcl ${srcdir}/../../../itcl ${srcdir}/../itcl/itk; do
+    if test -f $i/generic/itk.h ; then
+      ac_cv_c_itkh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_itkh}" = x ; then
+  ITKHDIR="# no Itk private headers found"
+  AC_MSG_ERROR([Can't find Itk private headers])
+fi
+if test x"${ac_cv_c_itkh}" != x ; then
+     ITKHDIR="-I${ac_cv_c_itkh}"
+fi
+# should always be here
+#     ITKLIB="../itcl/itk/unix/libitk.a"
+AC_SUBST(ITKHDIR)
+#AC_SUBST(ITKLIB)
+])
+
+# check for Tix headers. 
+
+AC_DEFUN(CY_AC_PATH_TIXH, [
+AC_MSG_CHECKING(for Tix private headers. srcdir=${srcdir})
+if test x"${ac_cv_c_tixh}" = x ; then
+  for i in ${srcdir}/../tix ${srcdir}/../../tix ${srcdir}/../../../tix ; do
+    if test -f $i/generic/tix.h ; then
+      ac_cv_c_tixh=`(cd $i/generic; pwd)`
+      break
+    fi
+  done
+fi
+if test x"${ac_cv_c_tixh}" = x ; then
+  TIXHDIR="# no Tix private headers found"
+  AC_MSG_ERROR([Can't find Tix private headers])
+fi
+if test x"${ac_cv_c_tixh}" != x ; then
+     TIXHDIR="-I${ac_cv_c_tixh}"
+fi
+AC_SUBST(TIXHDIR)
+])
+
+AC_DEFUN(CY_AC_PATH_TIXCONFIG, [
+#
+# Ok, lets find the tix configuration
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-itkconfig
+#
+
+if test x"${no_tix}" = x ; then
+  # we reset no_tix in case something fails here
+  no_tix=true
+  AC_ARG_WITH(tixconfig, [  --with-tixconfig           directory containing tix configuration (tixConfig.sh)],
+         with_tixconfig=${withval})
+  AC_MSG_CHECKING([for Tix configuration])
+  AC_CACHE_VAL(ac_cv_c_tixconfig,[
+
+  # First check to see if --with-tixconfig was specified.
+  if test x"${with_tixconfig}" != x ; then
+    if test -f "${with_tixconfig}/tixConfig.sh" ; then
+      ac_cv_c_tixconfig=`(cd ${with_tixconfig}; pwd)`
+    else
+      AC_MSG_ERROR([${with_tixconfig} directory doesn't contain tixConfig.sh])
+    fi
+  fi
+
+  # then check for a private Tix library
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in \
+		../tix \
+		`ls -dr ../tix 2>/dev/null` \
+		../../tix \
+		`ls -dr ../../tix 2>/dev/null` \
+		../../../tix \
+		`ls -dr ../../../tix 2>/dev/null` ; do
+      echo "**** Looking at $i - with ${configdir}"
+      if test -f "$i/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      echo "**** Looking at $i"
+      if test -f "$i/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i; pwd)`
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  echo "**** Other private locations"
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    for i in \
+		${srcdir}/../tix \
+		`ls -dr ${srcdir}/../tix 2>/dev/null` ; do
+      echo "**** Looking at $i - with ${configdir}"
+      if test -f "$i/${configdir}/tixConfig.sh" ; then
+        ac_cv_c_tixconfig=`(cd $i/${configdir}; pwd)`
+	break
+      fi
+    done
+  fi
+  ])
+  if test x"${ac_cv_c_tixconfig}" = x ; then
+    TIXCONFIG="# no Tix configs found"
+    AC_MSG_WARN(Can't find Tix configuration definitions)
+  else
+    no_tix=
+    TIXCONFIG=${ac_cv_c_tixconfig}/tixConfig.sh
+    AC_MSG_RESULT(found $TIXCONFIG)
+  fi
+fi
+
+])
+
+# Defined as a separate macro so we don't have to cache the values
+# from PATH_TIXCONFIG (because this can also be cached).
+AC_DEFUN(CY_AC_LOAD_TIXCONFIG, [
+    if test -f "$TIXCONFIG" ; then
+      . $TIXCONFIG
+    fi
+
+    AC_SUBST(TIX_VERSION)
+dnl not actually used, don't export to save symbols
+dnl    AC_SUBST(TIX_MAJOR_VERSION)
+dnl    AC_SUBST(TIX_MINOR_VERSION)
+dnl    AC_SUBST(TIX_DEFS)
+
+dnl not used, don't export to save symbols
+dnl    dnl AC_SUBST(TIX_LIB_FILE)
+
+dnl not used outside of configure
+dnl    AC_SUBST(TIX_LIBS)
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TIX_PREFIX)
+
+dnl not used, don't export to save symbols
+dnl    AC_SUBST(TIX_EXEC_PREFIX)
+
+dnl    AC_SUBST(TIX_BUILD_INCLUDES)
+    AC_SUBST(TIX_BUILD_LIB_SPEC)
+dnl    AC_SUBST(TIX_LIB_SPEC)
+])
+
+
+# serial 1
+
+# @defmac AC_PROG_CC_STDC
+# @maindex PROG_CC_STDC
+# @ovindex CC
+# If the C compiler in not in ANSI C mode by default, try to add an option
+# to output variable @code{CC} to make it so.  This macro tries various
+# options that select ANSI C on some system or another.  It considers the
+# compiler to be in ANSI C mode if it handles function prototypes correctly.
+#
+# If you use this macro, you should check after calling it whether the C
+# compiler has been set to accept ANSI C; if not, the shell variable
+# @code{am_cv_prog_cc_stdc} is set to @samp{no}.  If you wrote your source
+# code in ANSI C, you can make an un-ANSIfied copy of it by using the
+# program @code{ansi2knr}, which comes with Ghostscript.
+# @end defmac
+
+AC_DEFUN(AM_PROG_CC_STDC,
+[AC_REQUIRE([AC_PROG_CC])
+AC_BEFORE([$0], [AC_C_INLINE])
+AC_BEFORE([$0], [AC_C_CONST])
+dnl Force this before AC_PROG_CPP.  Some cpp's, eg on HPUX, require
+dnl a magic option to avoid problems with ANSI preprocessor commands
+dnl like #elif.
+dnl FIXME: can't do this because then AC_AIX won't work due to a
+dnl circular dependency.
+dnl AC_BEFORE([$0], [AC_PROG_CPP])
+AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
+AC_CACHE_VAL(am_cv_prog_cc_stdc,
+[am_cv_prog_cc_stdc=no
+ac_save_CC="$CC"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX			-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  AC_TRY_COMPILE(
+[#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+], [
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+],
+[am_cv_prog_cc_stdc="$ac_arg"; break])
+done
+CC="$ac_save_CC"
+])
+if test -z "$am_cv_prog_cc_stdc"; then
+  AC_MSG_RESULT([none needed])
+else
+  AC_MSG_RESULT($am_cv_prog_cc_stdc)
+fi
+case "x$am_cv_prog_cc_stdc" in
+  x|xno) ;;
+  *) CC="$CC $am_cv_prog_cc_stdc" ;;
+esac
+])
+
+# This file is derived from `gettext.m4'.  The difference is that the
+# included macros assume Cygnus-style source and build trees.
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+AC_DEFUN(CY_WITH_NLS,
+  [AC_MSG_CHECKING([whether NLS is requested])
+    dnl Default is enabled NLS
+    AC_ARG_ENABLE(nls,
+      [  --disable-nls           do not use Native Language Support],
+      USE_NLS=$enableval, USE_NLS=yes)
+    AC_MSG_RESULT($USE_NLS)
+    AC_SUBST(USE_NLS)
+
+    USE_INCLUDED_LIBINTL=no
+
+    dnl If we use NLS figure out what method
+    if test "$USE_NLS" = "yes"; then
+      AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH(included-gettext,
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If gettext or catgets are available (in this order) we
+        dnl use this.  Else we have to fall back to GNU NLS library.
+	dnl catgets is only used if permitted by option --with-catgets.
+	nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	AC_CHECK_HEADER(libintl.h,
+	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     AC_CHECK_LIB(intl, bindtextdomain,
+	       [AC_CACHE_CHECK([for gettext in libintl],
+		 gt_cv_func_gettext_libintl,
+		 [AC_TRY_LINK([], [return (int) gettext ("")],
+		 gt_cv_func_gettext_libintl=yes,
+		 gt_cv_func_gettext_libintl=no)])])
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      AC_DEFINE(HAVE_GETTEXT, 1,
+			[Define as 1 if you have gettext and don't want to use GNU gettext.])
+	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+	      if test "$MSGFMT" != "no"; then
+		AC_CHECK_FUNCS(dcgettext)
+		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr],
+		  [CATOBJEXT=.gmo
+		   DATADIRNAME=share],
+		  [CATOBJEXT=.mo
+		   DATADIRNAME=lib])
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	])
+
+	dnl In the standard gettext, we would now check for catgets.
+        dnl However, we never want to use catgets for our releases.
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  dnl Neither gettext nor catgets in included in the C library.
+	  dnl Fall back on GNU gettext library.
+	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        INTLOBJS="\$(GETTOBJS)"
+        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+        AC_SUBST(MSGFMT)
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/../intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=libintl.h
+        nls_cv_header_libgt=libgettext.h
+      fi
+
+      dnl Test whether we really found GNU xgettext.
+      if test "$XGETTEXT" != ":"; then
+	dnl If it is no GNU xgettext we define it as : so that the
+	dnl Makefiles still can work.
+	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found xgettext programs is not GNU xgettext; ignore it])
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=libintl.h
+      nls_cv_header_libgt=libgettext.h
+    fi
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl These rules are solely for the distribution goal.  While doing this
+    dnl we only have to keep exactly one list of the available catalogs
+    dnl in configure.in.
+    for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST(USE_INCLUDED_LIBINTL)
+    AC_SUBST(CATALOGS)
+    AC_SUBST(CATOBJEXT)
+    AC_SUBST(DATADIRNAME)
+    AC_SUBST(GMOFILES)
+    AC_SUBST(INSTOBJEXT)
+    AC_SUBST(INTLDEPS)
+    AC_SUBST(INTLLIBS)
+    AC_SUBST(INTLOBJS)
+    AC_SUBST(POFILES)
+    AC_SUBST(POSUB)
+  ])
+
+AC_DEFUN(CY_GNU_GETTEXT,
+  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+   AC_REQUIRE([AC_PROG_CC])dnl
+   AC_REQUIRE([AC_PROG_RANLIB])dnl
+   AC_REQUIRE([AC_ISC_POSIX])dnl
+   AC_REQUIRE([AC_HEADER_STDC])dnl
+   AC_REQUIRE([AC_C_CONST])dnl
+   AC_REQUIRE([AC_C_INLINE])dnl
+   AC_REQUIRE([AC_TYPE_OFF_T])dnl
+   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+   AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h])
+   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next])
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     AC_CHECK_FUNCS(stpcpy)
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
+   fi
+
+   AM_LC_MESSAGES
+   CY_WITH_NLS
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       AC_MSG_CHECKING(for catalogs to be installed)
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       AC_MSG_RESULT($LINGUAS)
+     fi
+
+     dnl Construct list of names of catalog files to be constructed.
+     if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+   dnl The reference to <locale.h> in the installed <libintl.h> file
+   dnl must be resolved because we cannot expect the users of this
+   dnl to define HAVE_LOCALE_H.
+   if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   AC_SUBST(INCLUDE_LOCALE_H)
+
+   dnl Determine which catalog format we have (if any is needed)
+   dnl For now we know about two different formats:
+   dnl   Linux libc-5 and the normal X/Open format
+   if test -f $srcdir/po2tbl.sed.in; then
+      if test "$CATOBJEXT" = ".cat"; then
+	 AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+	 dnl Transform the SED scripts while copying because some dumb SEDs
+         dnl cannot handle comments.
+	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+      fi
+      dnl po2tbl.sed is always needed.
+      sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+	 $srcdir/po2tbl.sed.in > po2tbl.sed
+   fi
+
+   dnl In the intl/Makefile.in we have a special dependency which makes
+   dnl only sense for gettext.  We comment this out for non-gettext
+   dnl packages.
+   if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   AC_SUBST(GT_NO)
+   AC_SUBST(GT_YES)
+
+   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+   AC_SUBST(MKINSTALLDIRS)
+
+   dnl *** For now the libtool support in intl/Makefile is not for real.
+   l=
+   AC_SUBST(l)
+
+   dnl Generate list of files to be processed by xgettext which will
+   dnl be included in po/Makefile.  But only do this if the po directory
+   dnl exists in srcdir.
+   if test -d $srcdir/po; then
+      test -d po || mkdir po
+      if test "x$srcdir" != "x."; then
+	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+	    posrcprefix="$srcdir/"
+	 else
+	    posrcprefix="../$srcdir/"
+	 fi
+      else
+	 posrcprefix="../"
+      fi
+      rm -f po/POTFILES
+      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	 < $srcdir/po/POTFILES.in > po/POTFILES
+   fi
+  ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+  [if test $ac_cv_header_locale_h = yes; then
+    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      AC_DEFINE(HAVE_LC_MESSAGES, 1,
+		[Define if your locale.h file contains LC_MESSAGES.])
+    fi
+  fi])
+
diff --git a/gdb/alpha-nat.c b/gdb/alpha-nat.c
new file mode 100644
index 0000000..59bd0d8
--- /dev/null
+++ b/gdb/alpha-nat.c
@@ -0,0 +1,297 @@
+/* Low level Alpha interface, for GDB when running native.
+   Copyright 1993, 1995, 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+#include <sys/ptrace.h>
+#ifdef __linux__
+# include <asm/reg.h>
+# include <alpha/ptrace.h>
+#else
+# include <machine/reg.h>
+#endif
+#include <sys/user.h>
+
+/* Prototypes for local functions. */
+
+static void fetch_osf_core_registers PARAMS ((char *,
+					      unsigned, int, CORE_ADDR));
+static void fetch_elf_core_registers PARAMS ((char *,
+					      unsigned, int, CORE_ADDR));
+
+/* Size of elements in jmpbuf */
+
+#define JB_ELEMENT_SIZE 8
+
+/* The definition for JB_PC in machine/reg.h is wrong.
+   And we can't get at the correct definition in setjmp.h as it is
+   not always available (eg. if _POSIX_SOURCE is defined which is the
+   default). As the defintion is unlikely to change (see comment
+   in <setjmp.h>, define the correct value here.  */
+
+#undef JB_PC
+#define JB_PC 2
+
+/* Figure out where the longjmp will land.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  CORE_ADDR jb_addr;
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+
+  jb_addr = read_register(A0_REGNUM);
+
+  if (target_read_memory(jb_addr + JB_PC * JB_ELEMENT_SIZE, raw_buffer,
+			 sizeof(CORE_ADDR)))
+    return 0;
+
+  *pc = extract_address (raw_buffer, sizeof(CORE_ADDR));
+  return 1;
+}
+
+/* Extract the register values out of the core file and store
+   them where `read_register' will find them.
+
+   CORE_REG_SECT points to the register values themselves, read into memory.
+   CORE_REG_SIZE is the size of that area.
+   WHICH says which set of registers we are handling (0 = int, 2 = float
+         on machines where they are discontiguous).
+   REG_ADDR is the offset from u.u_ar0 to the register values relative to
+            core_reg_sect.  This is used with old-fashioned core files to
+	    locate the registers in a large upage-plus-stack ".reg" section.
+	    Original upage address X is at location core_reg_sect+x+reg_addr.
+ */
+
+static void
+fetch_osf_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;
+{
+  register int regno;
+  register int addr;
+  int bad_reg = -1;
+
+  /* Table to map a gdb regnum to an index in the core register section.
+     The floating point register values are garbage in OSF/1.2 core files.  */
+  static int core_reg_mapping[NUM_REGS] =
+  {
+#define EFL (EF_SIZE / 8)
+	EF_V0,	EF_T0,	EF_T1,	EF_T2,	EF_T3,	EF_T4,	EF_T5,	EF_T6,
+	EF_T7,	EF_S0,	EF_S1,	EF_S2,	EF_S3,	EF_S4,	EF_S5,	EF_S6,
+	EF_A0,	EF_A1,	EF_A2,	EF_A3,	EF_A4,	EF_A5,	EF_T8,	EF_T9,
+	EF_T10,	EF_T11,	EF_RA,	EF_T12,	EF_AT,	EF_GP,	EF_SP,	-1,
+	EFL+0,	EFL+1,	EFL+2,	EFL+3,	EFL+4,	EFL+5,	EFL+6,	EFL+7,
+	EFL+8,	EFL+9,	EFL+10,	EFL+11,	EFL+12,	EFL+13,	EFL+14,	EFL+15,
+	EFL+16,	EFL+17,	EFL+18,	EFL+19,	EFL+20,	EFL+21,	EFL+22,	EFL+23,
+	EFL+24,	EFL+25,	EFL+26,	EFL+27,	EFL+28,	EFL+29,	EFL+30,	EFL+31,
+	EF_PC,	-1
+  };
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      if (CANNOT_FETCH_REGISTER (regno))
+	{
+	  supply_register (regno, zerobuf);
+	  continue;
+	}
+      addr = 8 * core_reg_mapping[regno];
+      if (addr < 0 || addr >= core_reg_size)
+	{
+	  if (bad_reg < 0)
+	    bad_reg = regno;
+	}
+      else
+	{
+	  supply_register (regno, core_reg_sect + addr);
+	}
+    }
+  if (bad_reg >= 0)
+    {
+      error ("Register %s not found in core file.", REGISTER_NAME (bad_reg));
+    }
+}
+
+static void
+fetch_elf_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;
+{
+  if (core_reg_size < 32*8)
+    {
+      error ("Core file register section too small (%u bytes).", core_reg_size);
+      return;
+    }
+
+  if (which == 2)
+    {
+      /* The FPU Registers.  */
+      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], core_reg_sect, 31*8);
+      memset (&registers[REGISTER_BYTE (FP0_REGNUM+31)], 0, 8);
+      memset (&register_valid[FP0_REGNUM], 1, 32);
+    }
+  else
+    {
+      /* The General Registers.  */
+      memcpy (&registers[REGISTER_BYTE (V0_REGNUM)], core_reg_sect, 31*8);
+      memcpy (&registers[REGISTER_BYTE (PC_REGNUM)], core_reg_sect+31*8, 8);
+      memset (&registers[REGISTER_BYTE (ZERO_REGNUM)], 0, 8);
+      memset (&register_valid[V0_REGNUM], 1, 32);
+      register_valid[PC_REGNUM] = 1;
+    }
+}
+
+
+/* Map gdb internal register number to a ptrace ``address''.
+   These ``addresses'' are defined in <sys/ptrace.h> */
+
+#define REGISTER_PTRACE_ADDR(regno) \
+   (regno < FP0_REGNUM ? 	GPR_BASE + (regno) \
+  : regno == PC_REGNUM ?	PC	\
+  : regno >= FP0_REGNUM ?	FPR_BASE + ((regno) - FP0_REGNUM) \
+  : 0)
+
+/* Return the ptrace ``address'' of register REGNO. */
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  return REGISTER_PTRACE_ADDR (regno);
+}
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+#if defined(USE_PROC_FS) || defined(HAVE_GREGSET_T)
+#include <sys/procfs.h>
+
+/*
+ * See the comment in m68k-tdep.c regarding the utility of these functions.
+ */
+
+void 
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register long *regp = ALPHA_REGSET_BASE (gregsetp);
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for (regi = 0; regi < 31; regi++)
+    supply_register (regi, (char *)(regp + regi));
+
+  supply_register (PC_REGNUM, (char *)(regp + 31));
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (ZERO_REGNUM, zerobuf);
+  supply_register (FP_REGNUM, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register long *regp = ALPHA_REGSET_BASE (gregsetp);
+
+  for (regi = 0; regi < 31; regi++)
+    if ((regno == -1) || (regno == regi))
+      *(regp + regi) = *(long *) &registers[REGISTER_BYTE (regi)];
+
+  if ((regno == -1) || (regno == PC_REGNUM))
+    *(regp + 31) = *(long *) &registers[REGISTER_BYTE (PC_REGNUM)];
+}
+
+/*
+ * Now we do the same thing for floating-point registers.
+ * Again, see the comments in m68k-tdep.c.
+ */
+
+void
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  register long *regp = ALPHA_REGSET_BASE (fpregsetp);
+
+  for (regi = 0; regi < 32; regi++)
+    supply_register (regi + FP0_REGNUM, (char *)(regp + regi));
+}
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  register long *regp = ALPHA_REGSET_BASE (fpregsetp);
+
+  for (regi = FP0_REGNUM; regi < FP0_REGNUM + 32; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regi - FP0_REGNUM) =
+	    *(long *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+}
+#endif
+
+
+/* Register that we are able to handle alpha core file formats. */
+
+static struct core_fns alpha_osf_core_fns =
+{
+  /* This really is bfd_target_unknown_flavour.  */
+
+  bfd_target_unknown_flavour,
+  fetch_osf_core_registers,
+  NULL
+};
+
+static struct core_fns alpha_elf_core_fns =
+{
+  bfd_target_elf_flavour,
+  fetch_elf_core_registers,
+  NULL
+};
+
+void
+_initialize_core_alpha ()
+{
+  add_core_fns (&alpha_osf_core_fns);
+  add_core_fns (&alpha_elf_core_fns);
+}
diff --git a/gdb/alpha-tdep.c b/gdb/alpha-tdep.c
new file mode 100644
index 0000000..0201016
--- /dev/null
+++ b/gdb/alpha-tdep.c
@@ -0,0 +1,1410 @@
+/* Target-dependent code for the ALPHA architecture, for GDB, the GNU Debugger.
+   Copyright 1993, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "dis-asm.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb_string.h"
+
+/* FIXME: Some of this code should perhaps be merged with mips-tdep.c.  */
+
+/* Prototypes for local functions. */
+
+static alpha_extra_func_info_t push_sigtramp_desc PARAMS ((CORE_ADDR low_addr));
+
+static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
+
+static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+
+static alpha_extra_func_info_t heuristic_proc_desc PARAMS ((CORE_ADDR,
+							    CORE_ADDR,
+							    struct frame_info *));
+
+static alpha_extra_func_info_t find_proc_desc PARAMS ((CORE_ADDR,
+						       struct frame_info *));
+
+#if 0
+static int alpha_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
+#endif
+
+static void reinit_frame_cache_sfunc PARAMS ((char *, int,
+					      struct cmd_list_element *));
+
+static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
+					 alpha_extra_func_info_t proc_desc));
+
+static int alpha_in_prologue PARAMS ((CORE_ADDR pc,
+				alpha_extra_func_info_t proc_desc));
+
+/* Heuristic_proc_start may hunt through the text section for a long
+   time across a 2400 baud serial line.  Allows the user to limit this
+   search.  */
+static unsigned int heuristic_fence_post = 0;
+
+/* Layout of a stack frame on the alpha:
+
+                |				|
+ pdr members:	|  7th ... nth arg,		|
+                |  `pushed' by caller.		|
+                |				|
+----------------|-------------------------------|<--  old_sp == vfp
+   ^  ^  ^  ^	|				|
+   |  |  |  |	|				|
+   |  |localoff	|  Copies of 1st .. 6th		|
+   |  |  |  |	|  argument if necessary.	|
+   |  |  |  v	|				|
+   |  |  |  ---	|-------------------------------|<-- FRAME_LOCALS_ADDRESS
+   |  |  |      |				|
+   |  |  |      |  Locals and temporaries.	|
+   |  |  |      |				|
+   |  |  |      |-------------------------------|
+   |  |  |      |				|
+   |-fregoffset	|  Saved float registers.	|
+   |  |  |      |  F9				|
+   |  |  |      |   .				|
+   |  |  |      |   .				|
+   |  |  |      |  F2				|
+   |  |  v      |				|
+   |  |  -------|-------------------------------|
+   |  |         |				|
+   |  |         |  Saved registers.		|
+   |  |         |  S6				|
+   |-regoffset	|   .				|
+   |  |         |   .				|
+   |  |         |  S0				|
+   |  |         |  pdr.pcreg			|
+   |  v         |				|
+   |  ----------|-------------------------------|
+   |            |				|
+ frameoffset    |  Argument build area, gets	|
+   |            |  7th ... nth arg for any	|
+   |            |  called procedure.		|
+   v            |  				|
+   -------------|-------------------------------|<-- sp
+                |				|
+*/
+
+#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
+#define PROC_HIGH_ADDR(proc) ((proc)->pdr.iline) /* upper address bound */
+#define PROC_DUMMY_FRAME(proc) ((proc)->pdr.iopt) /* frame for CALL_DUMMY */
+#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
+#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
+#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
+#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
+#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
+#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset)
+#define PROC_PC_REG(proc) ((proc)->pdr.pcreg)
+#define PROC_LOCALOFF(proc) ((proc)->pdr.localoff)
+#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym)
+#define _PROC_MAGIC_ 0x0F0F0F0F
+#define PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym == _PROC_MAGIC_)
+#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
+
+struct linked_proc_info
+{
+  struct alpha_extra_func_info info;
+  struct linked_proc_info *next;
+} *linked_proc_desc_table = NULL;
+
+
+/* Under GNU/Linux, signal handler invocations can be identified by the
+   designated code sequence that is used to return from a signal
+   handler.  In particular, the return address of a signal handler
+   points to the following sequence (the first instruction is quadword
+   aligned):
+
+	bis $30,$30,$16
+	addq $31,0x67,$0
+	call_pal callsys
+
+   Each instruction has a unique encoding, so we simply attempt to
+   match the instruction the pc is pointing to with any of the above
+   instructions.  If there is a hit, we know the offset to the start
+   of the designated sequence and can then check whether we really are
+   executing in a designated sequence.  If not, -1 is returned,
+   otherwise the offset from the start of the desingated sequence is
+   returned.
+
+   There is a slight chance of false hits: code could jump into the
+   middle of the designated sequence, in which case there is no
+   guarantee that we are in the middle of a sigreturn syscall.  Don't
+   think this will be a problem in praxis, though.
+*/
+
+long
+alpha_linux_sigtramp_offset (CORE_ADDR pc)
+{
+  unsigned int i[3], w;
+  long off;
+
+  if (read_memory_nobpt(pc, (char *) &w, 4) != 0)
+    return -1;
+
+  off = -1;
+  switch (w)
+    {
+    case 0x47de0410: off = 0; break;	/* bis $30,$30,$16 */
+    case 0x43ecf400: off = 4; break;	/* addq $31,0x67,$0 */
+    case 0x00000083: off = 8; break;	/* call_pal callsys */
+    default:	     return -1;
+    }
+  pc -= off;
+  if (pc & 0x7)
+    {
+      /* designated sequence is not quadword aligned */
+      return -1;
+    }
+
+  if (read_memory_nobpt(pc, (char *) i, sizeof(i)) != 0)
+    return -1;
+
+  if (i[0] == 0x47de0410 && i[1] == 0x43ecf400 && i[2] == 0x00000083)
+    return off;
+
+  return -1;
+}
+
+
+/* Under OSF/1, the __sigtramp routine is frameless and has a frame
+   size of zero, but we are able to backtrace through it.  */
+CORE_ADDR
+alpha_osf_skip_sigtramp_frame (frame, pc)
+     struct frame_info *frame;
+     CORE_ADDR pc;
+{
+  char *name;
+  find_pc_partial_function (pc, &name, (CORE_ADDR *)NULL, (CORE_ADDR *)NULL);
+  if (IN_SIGTRAMP (pc, name))
+    return frame->frame;
+  else
+    return 0;
+}
+
+
+/* Dynamically create a signal-handler caller procedure descriptor for
+   the signal-handler return code starting at address LOW_ADDR.  The
+   descriptor is added to the linked_proc_desc_table.  */
+
+static alpha_extra_func_info_t
+push_sigtramp_desc (low_addr)
+     CORE_ADDR low_addr;
+{
+  struct linked_proc_info *link;
+  alpha_extra_func_info_t proc_desc;
+
+  link = (struct linked_proc_info *)
+    xmalloc (sizeof (struct linked_proc_info));
+  link->next = linked_proc_desc_table;
+  linked_proc_desc_table = link;
+
+  proc_desc = &link->info;
+
+  proc_desc->numargs = 0;
+  PROC_LOW_ADDR (proc_desc)	= low_addr;
+  PROC_HIGH_ADDR (proc_desc)	= low_addr + 3 * 4;
+  PROC_DUMMY_FRAME (proc_desc)	= 0;
+  PROC_FRAME_OFFSET (proc_desc)	= 0x298; /* sizeof(struct sigcontext_struct) */
+  PROC_FRAME_REG (proc_desc)	= SP_REGNUM;
+  PROC_REG_MASK (proc_desc)	= 0xffff;
+  PROC_FREG_MASK (proc_desc)	= 0xffff;
+  PROC_PC_REG (proc_desc)	= 26;
+  PROC_LOCALOFF (proc_desc)	= 0;
+  SET_PROC_DESC_IS_DYN_SIGTRAMP (proc_desc);
+  return (proc_desc);
+}
+
+
+/* Guaranteed to set frame->saved_regs to some values (it never leaves it
+   NULL).  */
+
+void
+alpha_find_saved_regs (frame)
+     struct frame_info *frame;
+{
+  int ireg;
+  CORE_ADDR reg_position;
+  unsigned long mask;
+  alpha_extra_func_info_t proc_desc;
+  int returnreg;
+
+  frame_saved_regs_zalloc (frame);
+
+  /* If it is the frame for __sigtramp, the saved registers are located
+     in a sigcontext structure somewhere on the stack. __sigtramp
+     passes a pointer to the sigcontext structure on the stack.
+     If the stack layout for __sigtramp changes, or if sigcontext offsets
+     change, we might have to update this code.  */
+#ifndef SIGFRAME_PC_OFF
+#define SIGFRAME_PC_OFF		(2 * 8)
+#define SIGFRAME_REGSAVE_OFF	(4 * 8)
+#define SIGFRAME_FPREGSAVE_OFF	(SIGFRAME_REGSAVE_OFF + 32 * 8 + 8)
+#endif
+  if (frame->signal_handler_caller)
+    {
+      CORE_ADDR sigcontext_addr;
+
+      sigcontext_addr = SIGCONTEXT_ADDR (frame);
+      for (ireg = 0; ireg < 32; ireg++)
+	{
+ 	  reg_position = sigcontext_addr + SIGFRAME_REGSAVE_OFF + ireg * 8;
+ 	  frame->saved_regs[ireg] = reg_position;
+	}
+      for (ireg = 0; ireg < 32; ireg++)
+	{
+ 	  reg_position = sigcontext_addr + SIGFRAME_FPREGSAVE_OFF + ireg * 8;
+ 	  frame->saved_regs[FP0_REGNUM + ireg] = reg_position;
+	}
+      frame->saved_regs[PC_REGNUM] = sigcontext_addr + SIGFRAME_PC_OFF;
+      return;
+    }
+
+  proc_desc = frame->proc_desc;
+  if (proc_desc == NULL)
+    /* I'm not sure how/whether this can happen.  Normally when we can't
+       find a proc_desc, we "synthesize" one using heuristic_proc_desc
+       and set the saved_regs right away.  */
+    return;
+
+  /* Fill in the offsets for the registers which gen_mask says
+     were saved.  */
+
+  reg_position = frame->frame + PROC_REG_OFFSET (proc_desc);
+  mask = PROC_REG_MASK (proc_desc);
+
+  returnreg = PROC_PC_REG (proc_desc);
+
+  /* Note that RA is always saved first, regardless of its actual
+     register number.  */
+  if (mask & (1 << returnreg))
+    {
+      frame->saved_regs[returnreg] = reg_position;
+      reg_position += 8;
+      mask &= ~(1 << returnreg); /* Clear bit for RA so we
+				    don't save again later. */
+    }
+
+  for (ireg = 0; ireg <= 31 ; ++ireg)
+    if (mask & (1 << ireg))
+      {
+	frame->saved_regs[ireg] = reg_position;
+	reg_position += 8;
+      }
+
+  /* Fill in the offsets for the registers which float_mask says
+     were saved.  */
+
+  reg_position = frame->frame + PROC_FREG_OFFSET (proc_desc);
+  mask = PROC_FREG_MASK (proc_desc);
+
+  for (ireg = 0; ireg <= 31 ; ++ireg)
+    if (mask & (1 << ireg))
+      {
+	frame->saved_regs[FP0_REGNUM+ireg] = reg_position;
+	reg_position += 8;
+      }
+
+  frame->saved_regs[PC_REGNUM] = frame->saved_regs[returnreg];
+}
+
+static CORE_ADDR
+read_next_frame_reg(fi, regno)
+     struct frame_info *fi;
+     int regno;
+{
+  for (; fi; fi = fi->next)
+    {
+      /* We have to get the saved sp from the sigcontext
+	 if it is a signal handler frame.  */
+      if (regno == SP_REGNUM && !fi->signal_handler_caller)
+	return fi->frame;
+      else
+	{
+	  if (fi->saved_regs == NULL)
+	    alpha_find_saved_regs (fi);
+	  if (fi->saved_regs[regno])
+	    return read_memory_integer(fi->saved_regs[regno], 8);
+	}
+    }
+  return read_register(regno);
+}
+
+CORE_ADDR
+alpha_frame_saved_pc(frame)
+     struct frame_info *frame;
+{
+  alpha_extra_func_info_t proc_desc = frame->proc_desc;
+  /* We have to get the saved pc from the sigcontext
+     if it is a signal handler frame.  */
+  int pcreg = frame->signal_handler_caller ? PC_REGNUM : frame->pc_reg;
+
+  if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+      return read_memory_integer(frame->frame - 8, 8);
+
+  return read_next_frame_reg(frame, pcreg);
+}
+
+CORE_ADDR
+alpha_saved_pc_after_call (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR pc = frame->pc;
+  CORE_ADDR tmp;
+  alpha_extra_func_info_t proc_desc;
+  int pcreg;
+
+  /* Skip over shared library trampoline if necessary.  */
+  tmp = SKIP_TRAMPOLINE_CODE (pc);
+  if (tmp != 0)
+    pc = tmp;
+
+  proc_desc = find_proc_desc (pc, frame->next);
+  pcreg = proc_desc ? PROC_PC_REG (proc_desc) : RA_REGNUM;
+
+  if (frame->signal_handler_caller)
+    return alpha_frame_saved_pc (frame);
+  else
+    return read_register (pcreg);
+}
+
+
+static struct alpha_extra_func_info temp_proc_desc;
+static struct frame_saved_regs temp_saved_regs;
+
+/* Nonzero if instruction at PC is a return instruction.  "ret
+   $zero,($ra),1" on alpha. */
+
+static int
+alpha_about_to_return (pc)
+     CORE_ADDR pc;
+{
+  return read_memory_integer (pc, 4) == 0x6bfa8001;
+}
+
+
+
+/* This fencepost looks highly suspicious to me.  Removing it also
+   seems suspicious as it could affect remote debugging across serial
+   lines.  */
+
+static CORE_ADDR
+heuristic_proc_start(pc)
+    CORE_ADDR pc;
+{
+    CORE_ADDR start_pc = pc;
+    CORE_ADDR fence = start_pc - heuristic_fence_post;
+
+    if (start_pc == 0)	return 0;
+
+    if (heuristic_fence_post == UINT_MAX
+	|| fence < VM_MIN_ADDRESS)
+      fence = VM_MIN_ADDRESS;
+
+    /* search back for previous return */
+    for (start_pc -= 4; ; start_pc -= 4)
+	if (start_pc < fence)
+	  {
+	    /* It's not clear to me why we reach this point when
+	       stop_soon_quietly, but with this test, at least we
+	       don't print out warnings for every child forked (eg, on
+	       decstation).  22apr93 rich@cygnus.com.  */
+	    if (!stop_soon_quietly)
+	      {
+		static int blurb_printed = 0;
+
+		if (fence == VM_MIN_ADDRESS)
+		  warning("Hit beginning of text section without finding");
+		else
+		  warning("Hit heuristic-fence-post without finding");
+		
+		warning("enclosing function for address 0x%lx", pc);
+		if (!blurb_printed)
+		  {
+		    printf_filtered ("\
+This warning occurs if you are debugging a function without any symbols\n\
+(for example, in a stripped executable).  In that case, you may wish to\n\
+increase the size of the search with the `set heuristic-fence-post' command.\n\
+\n\
+Otherwise, you told GDB there was a function where there isn't one, or\n\
+(more likely) you have encountered a bug in GDB.\n");
+		    blurb_printed = 1;
+		  }
+	      }
+
+	    return 0; 
+	  }
+	else if (alpha_about_to_return (start_pc))
+	  break;
+
+    start_pc += 4; /* skip return */
+    return start_pc;
+}
+
+static alpha_extra_func_info_t
+heuristic_proc_desc(start_pc, limit_pc, next_frame)
+    CORE_ADDR start_pc, limit_pc;
+    struct frame_info *next_frame;
+{
+    CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+    CORE_ADDR cur_pc;
+    int frame_size;
+    int has_frame_reg = 0;
+    unsigned long reg_mask = 0;
+    int pcreg = -1;
+
+    if (start_pc == 0)
+      return NULL;
+    memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
+    memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+    PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+
+    if (start_pc + 200 < limit_pc)
+      limit_pc = start_pc + 200;
+    frame_size = 0;
+    for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += 4)
+      {
+        char buf[4];
+	unsigned long word;
+	int status;
+
+	status = read_memory_nobpt (cur_pc, buf, 4); 
+	if (status)
+	  memory_error (status, cur_pc);
+	word = extract_unsigned_integer (buf, 4);
+
+	if ((word & 0xffff0000) == 0x23de0000)		/* lda $sp,n($sp) */
+	  {
+	    if (word & 0x8000)
+	      frame_size += (-word) & 0xffff;
+	    else
+	      /* Exit loop if a positive stack adjustment is found, which
+		 usually means that the stack cleanup code in the function
+		 epilogue is reached.  */
+	      break;
+	  }
+	else if ((word & 0xfc1f0000) == 0xb41e0000	/* stq reg,n($sp) */
+		 && (word & 0xffff0000) != 0xb7fe0000)	/* reg != $zero */
+	  {
+	    int reg = (word & 0x03e00000) >> 21;
+	    reg_mask |= 1 << reg;
+	    temp_saved_regs.regs[reg] = sp + (short)word;
+
+	    /* Starting with OSF/1-3.2C, the system libraries are shipped
+	       without local symbols, but they still contain procedure
+	       descriptors without a symbol reference. GDB is currently
+	       unable to find these procedure descriptors and uses
+	       heuristic_proc_desc instead.
+	       As some low level compiler support routines (__div*, __add*)
+	       use a non-standard return address register, we have to
+	       add some heuristics to determine the return address register,
+	       or stepping over these routines will fail.
+	       Usually the return address register is the first register
+	       saved on the stack, but assembler optimization might
+	       rearrange the register saves.
+	       So we recognize only a few registers (t7, t9, ra) within
+	       the procedure prologue as valid return address registers.
+	       If we encounter a return instruction, we extract the
+	       the return address register from it.
+
+	       FIXME: Rewriting GDB to access the procedure descriptors,
+	       e.g. via the minimal symbol table, might obviate this hack.  */
+	    if (pcreg == -1
+		&& cur_pc < (start_pc + 80)
+		&& (reg == T7_REGNUM || reg == T9_REGNUM || reg == RA_REGNUM))
+	      pcreg = reg;
+	  }
+	else if ((word & 0xffe0ffff) == 0x6be08001)	/* ret zero,reg,1 */
+	  pcreg = (word >> 16) & 0x1f;
+	else if (word == 0x47de040f)			/* bis sp,sp fp */
+	  has_frame_reg = 1;
+      }
+    if (pcreg == -1)
+      {
+	/* If we haven't found a valid return address register yet,
+	   keep searching in the procedure prologue.  */
+	while (cur_pc < (limit_pc + 80) && cur_pc < (start_pc + 80))
+	  {
+	    char buf[4];
+	    unsigned long word;
+
+	    if (read_memory_nobpt (cur_pc, buf, 4))
+	      break;
+	    cur_pc += 4;
+	    word = extract_unsigned_integer (buf, 4);
+
+	    if ((word & 0xfc1f0000) == 0xb41e0000	/* stq reg,n($sp) */
+		&& (word & 0xffff0000) != 0xb7fe0000)	/* reg != $zero */
+	      {
+		int reg = (word & 0x03e00000) >> 21;
+		if (reg == T7_REGNUM || reg == T9_REGNUM || reg == RA_REGNUM)
+		  {
+		    pcreg = reg;
+		    break;
+		  }
+	      }
+	    else if ((word & 0xffe0ffff) == 0x6be08001)	/* ret zero,reg,1 */
+	      {
+		pcreg = (word >> 16) & 0x1f;
+		break;
+	      }
+	  }
+      }
+
+    if (has_frame_reg)
+      PROC_FRAME_REG(&temp_proc_desc) = GCC_FP_REGNUM;
+    else
+      PROC_FRAME_REG(&temp_proc_desc) = SP_REGNUM;
+    PROC_FRAME_OFFSET(&temp_proc_desc) = frame_size;
+    PROC_REG_MASK(&temp_proc_desc) = reg_mask;
+    PROC_PC_REG(&temp_proc_desc) = (pcreg == -1) ? RA_REGNUM : pcreg;
+    PROC_LOCALOFF(&temp_proc_desc) = 0;	/* XXX - bogus */
+    return &temp_proc_desc;
+}
+
+/* This returns the PC of the first inst after the prologue.  If we can't
+   find the prologue, then return 0.  */
+
+static CORE_ADDR
+after_prologue (pc, proc_desc)
+     CORE_ADDR pc;
+     alpha_extra_func_info_t proc_desc;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR func_addr, func_end;
+
+  if (!proc_desc)
+    proc_desc = find_proc_desc (pc, NULL);
+
+  if (proc_desc)
+    {
+      if (PROC_DESC_IS_DYN_SIGTRAMP (proc_desc))
+	return PROC_LOW_ADDR (proc_desc);	/* "prologue" is in kernel */
+
+      /* If function is frameless, then we need to do it the hard way.  I
+	 strongly suspect that frameless always means prologueless... */
+      if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+	  && PROC_FRAME_OFFSET (proc_desc) == 0)
+	return 0;
+    }
+
+  if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    return 0;			/* Unknown */
+
+  sal = find_pc_line (func_addr, 0);
+
+  if (sal.end < func_end)
+    return sal.end;
+
+  /* The line after the prologue is after the end of the function.  In this
+     case, tell the caller to find the prologue the hard way.  */
+
+  return 0;
+}
+
+/* Return non-zero if we *might* be in a function prologue.  Return zero if we
+   are definitively *not* in a function prologue.  */
+
+static int
+alpha_in_prologue (pc, proc_desc)
+     CORE_ADDR pc;
+     alpha_extra_func_info_t proc_desc;
+{
+  CORE_ADDR after_prologue_pc;
+
+  after_prologue_pc = after_prologue (pc, proc_desc);
+
+  if (after_prologue_pc == 0
+      || pc < after_prologue_pc)
+    return 1;
+  else
+    return 0;
+}
+
+static alpha_extra_func_info_t
+find_proc_desc (pc, next_frame)
+    CORE_ADDR pc;
+    struct frame_info *next_frame;
+{
+  alpha_extra_func_info_t proc_desc;
+  struct block *b;
+  struct symbol *sym;
+  CORE_ADDR startaddr;
+
+  /* Try to get the proc_desc from the linked call dummy proc_descs
+     if the pc is in the call dummy.
+     This is hairy. In the case of nested dummy calls we have to find the
+     right proc_desc, but we might not yet know the frame for the dummy
+     as it will be contained in the proc_desc we are searching for.
+     So we have to find the proc_desc whose frame is closest to the current
+     stack pointer.  */
+
+  if (PC_IN_CALL_DUMMY (pc, 0, 0))
+    {
+      struct linked_proc_info *link;
+      CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+      alpha_extra_func_info_t found_proc_desc = NULL;
+      long min_distance = LONG_MAX;
+
+      for (link = linked_proc_desc_table; link; link = link->next)
+	{
+	  long distance = (CORE_ADDR) PROC_DUMMY_FRAME (&link->info) - sp;
+	  if (distance > 0 && distance < min_distance)
+	    {
+	      min_distance = distance;
+	      found_proc_desc = &link->info;
+	    }
+	}
+      if (found_proc_desc != NULL)
+	return found_proc_desc;
+    }
+
+  b = block_for_pc(pc);
+
+  find_pc_partial_function (pc, NULL, &startaddr, NULL);
+  if (b == NULL)
+    sym = NULL;
+  else
+    {
+      if (startaddr > BLOCK_START (b))
+	/* This is the "pathological" case referred to in a comment in
+	   print_frame_info.  It might be better to move this check into
+	   symbol reading.  */
+	sym = NULL;
+      else
+	sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE,
+			     0, NULL);
+    }
+
+  /* If we never found a PDR for this function in symbol reading, then
+     examine prologues to find the information.  */
+  if (sym && ((mips_extra_func_info_t) SYMBOL_VALUE (sym))->pdr.framereg == -1)
+    sym = NULL;
+
+  if (sym)
+    {
+	/* IF this is the topmost frame AND
+	 * (this proc does not have debugging information OR
+	 * the PC is in the procedure prologue)
+	 * THEN create a "heuristic" proc_desc (by analyzing
+	 * the actual code) to replace the "official" proc_desc.
+	 */
+	proc_desc = (alpha_extra_func_info_t)SYMBOL_VALUE(sym);
+	if (next_frame == NULL)
+	  {
+	    if (PROC_DESC_IS_DUMMY (proc_desc) || alpha_in_prologue (pc, proc_desc))
+	      {
+		alpha_extra_func_info_t found_heuristic =
+		  heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+				       pc, next_frame);
+		if (found_heuristic)
+		  {
+		    PROC_LOCALOFF (found_heuristic) =
+		      PROC_LOCALOFF (proc_desc);
+		    PROC_PC_REG (found_heuristic) = PROC_PC_REG (proc_desc);
+		    proc_desc = found_heuristic;
+		  }
+	      }
+	  }
+    }
+  else
+    {
+      long offset;
+
+      /* Is linked_proc_desc_table really necessary?  It only seems to be used
+	 by procedure call dummys.  However, the procedures being called ought
+	 to have their own proc_descs, and even if they don't,
+	 heuristic_proc_desc knows how to create them! */
+
+      register struct linked_proc_info *link;
+      for (link = linked_proc_desc_table; link; link = link->next)
+	  if (PROC_LOW_ADDR(&link->info) <= pc
+	      && PROC_HIGH_ADDR(&link->info) > pc)
+	      return &link->info;
+
+      /* If PC is inside a dynamically generated sigtramp handler,
+	 create and push a procedure descriptor for that code: */
+      offset = DYNAMIC_SIGTRAMP_OFFSET (pc);
+      if (offset >= 0)
+	return push_sigtramp_desc (pc - offset);
+
+      /* If heuristic_fence_post is non-zero, determine the procedure
+	 start address by examining the instructions.
+	 This allows us to find the start address of static functions which
+	 have no symbolic information, as startaddr would have been set to
+	 the preceding global function start address by the
+	 find_pc_partial_function call above.  */
+      if (startaddr == 0 || heuristic_fence_post != 0)
+	startaddr = heuristic_proc_start (pc);
+
+      proc_desc =
+	heuristic_proc_desc (startaddr, pc, next_frame);
+    }
+  return proc_desc;
+}
+
+alpha_extra_func_info_t cached_proc_desc;
+
+CORE_ADDR
+alpha_frame_chain(frame)
+    struct frame_info *frame;
+{
+    alpha_extra_func_info_t proc_desc;
+    CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+
+    if (saved_pc == 0 || inside_entry_file (saved_pc))
+      return 0;
+
+    proc_desc = find_proc_desc(saved_pc, frame);
+    if (!proc_desc)
+      return 0;
+
+    cached_proc_desc = proc_desc;
+
+    /* Fetch the frame pointer for a dummy frame from the procedure
+       descriptor.  */
+    if (PROC_DESC_IS_DUMMY(proc_desc))
+      return (CORE_ADDR) PROC_DUMMY_FRAME(proc_desc);
+
+    /* If no frame pointer and frame size is zero, we must be at end
+       of stack (or otherwise hosed).  If we don't check frame size,
+       we loop forever if we see a zero size frame.  */
+    if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+	&& PROC_FRAME_OFFSET (proc_desc) == 0
+	/* The previous frame from a sigtramp frame might be frameless
+	   and have frame size zero.  */
+	&& !frame->signal_handler_caller)
+      return FRAME_PAST_SIGTRAMP_FRAME (frame, saved_pc);
+    else
+      return read_next_frame_reg(frame, PROC_FRAME_REG(proc_desc))
+	     + PROC_FRAME_OFFSET(proc_desc);
+}
+
+void
+init_extra_frame_info (frame)
+     struct frame_info *frame;
+{
+  /* Use proc_desc calculated in frame_chain */
+  alpha_extra_func_info_t proc_desc =
+    frame->next ? cached_proc_desc : find_proc_desc(frame->pc, frame->next);
+
+  frame->saved_regs = NULL;
+  frame->localoff = 0;
+  frame->pc_reg = RA_REGNUM;
+  frame->proc_desc = proc_desc == &temp_proc_desc ? 0 : proc_desc;
+  if (proc_desc)
+    {
+      /* Get the locals offset and the saved pc register from the
+	 procedure descriptor, they are valid even if we are in the
+	 middle of the prologue.  */
+      frame->localoff = PROC_LOCALOFF(proc_desc);
+      frame->pc_reg = PROC_PC_REG(proc_desc);
+
+      /* Fixup frame-pointer - only needed for top frame */
+
+      /* Fetch the frame pointer for a dummy frame from the procedure
+	 descriptor.  */
+      if (PROC_DESC_IS_DUMMY(proc_desc))
+	frame->frame = (CORE_ADDR) PROC_DUMMY_FRAME(proc_desc);
+
+      /* This may not be quite right, if proc has a real frame register.
+	 Get the value of the frame relative sp, procedure might have been
+	 interrupted by a signal at it's very start.  */
+      else if (frame->pc == PROC_LOW_ADDR (proc_desc)
+	       && !PROC_DESC_IS_DYN_SIGTRAMP (proc_desc))
+	frame->frame = read_next_frame_reg (frame->next, SP_REGNUM);
+      else
+	frame->frame = read_next_frame_reg (frame->next, PROC_FRAME_REG (proc_desc))
+	  + PROC_FRAME_OFFSET (proc_desc);
+
+      if (proc_desc == &temp_proc_desc)
+	{
+	  char *name;
+
+	  /* Do not set the saved registers for a sigtramp frame,
+	     alpha_find_saved_registers will do that for us.
+	     We can't use frame->signal_handler_caller, it is not yet set.  */
+	  find_pc_partial_function (frame->pc, &name,
+				    (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+	  if (!IN_SIGTRAMP (frame->pc, name))
+	    {
+	      frame->saved_regs = (CORE_ADDR*)
+		frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+	      memcpy (frame->saved_regs, temp_saved_regs.regs, SIZEOF_FRAME_SAVED_REGS);
+	      frame->saved_regs[PC_REGNUM]
+		= frame->saved_regs[RA_REGNUM];
+	    }
+	}
+    }
+}
+
+/* ALPHA stack frames are almost impenetrable.  When execution stops,
+   we basically have to look at symbol information for the function
+   that we stopped in, which tells us *which* register (if any) is
+   the base of the frame pointer, and what offset from that register
+   the frame itself is at.  
+
+   This presents a problem when trying to examine a stack in memory
+   (that isn't executing at the moment), using the "frame" command.  We
+   don't have a PC, nor do we have any registers except SP.
+
+   This routine takes two arguments, SP and PC, and tries to make the
+   cached frames look as if these two arguments defined a frame on the
+   cache.  This allows the rest of info frame to extract the important
+   arguments without difficulty.  */
+
+struct frame_info *
+setup_arbitrary_frame (argc, argv)
+     int argc;
+     CORE_ADDR *argv;
+{
+  if (argc != 2)
+    error ("ALPHA frame specifications require two arguments: sp and pc");
+
+  return create_new_frame (argv[0], argv[1]);
+}
+
+/* The alpha passes the first six arguments in the registers, the rest on
+   the stack. The register arguments are eventually transferred to the
+   argument transfer area immediately below the stack by the called function
+   anyway. So we `push' at least six arguments on the stack, `reload' the
+   argument registers and then adjust the stack pointer to point past the
+   sixth argument. This algorithm simplifies the passing of a large struct
+   which extends from the registers to the stack.
+   If the called function is returning a structure, the address of the
+   structure to be returned is passed as a hidden first argument.  */
+
+CORE_ADDR
+alpha_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  register i;
+  int accumulate_size = struct_return ? 8 : 0;
+  int arg_regs_size = ALPHA_NUM_ARG_REGS * 8;
+  struct alpha_arg { char *contents; int len; int offset; };
+  struct alpha_arg *alpha_args =
+      (struct alpha_arg*)alloca (nargs * sizeof (struct alpha_arg));
+  register struct alpha_arg *m_arg;
+  char raw_buffer[sizeof (CORE_ADDR)];
+  int required_arg_regs;
+
+  for (i = 0, m_arg = alpha_args; i < nargs; i++, m_arg++)
+    {
+      value_ptr arg = args[i];
+      struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+      /* Cast argument to long if necessary as the compiler does it too.  */
+      switch (TYPE_CODE (arg_type))
+	{
+	case TYPE_CODE_INT:
+	case TYPE_CODE_BOOL:
+	case TYPE_CODE_CHAR:
+	case TYPE_CODE_RANGE:
+	case TYPE_CODE_ENUM:
+	  if (TYPE_LENGTH (arg_type) < TYPE_LENGTH (builtin_type_long))
+	    {
+	      arg_type = builtin_type_long;
+	      arg = value_cast (arg_type, arg);
+	    }
+	  break;
+	default:
+	  break;
+	}
+      m_arg->len = TYPE_LENGTH (arg_type);
+      m_arg->offset = accumulate_size;
+      accumulate_size = (accumulate_size + m_arg->len + 7) & ~7;
+      m_arg->contents = VALUE_CONTENTS(arg);
+    }
+
+  /* Determine required argument register loads, loading an argument register
+     is expensive as it uses three ptrace calls.  */
+  required_arg_regs = accumulate_size / 8;
+  if (required_arg_regs > ALPHA_NUM_ARG_REGS)
+    required_arg_regs = ALPHA_NUM_ARG_REGS;
+
+  /* Make room for the arguments on the stack.  */
+  if (accumulate_size < arg_regs_size)
+    accumulate_size = arg_regs_size; 
+  sp -= accumulate_size;
+
+  /* Keep sp aligned to a multiple of 16 as the compiler does it too.  */
+  sp &= ~15;
+
+  /* `Push' arguments on the stack.  */
+  for (i = nargs; m_arg--, --i >= 0; )
+    write_memory(sp + m_arg->offset, m_arg->contents, m_arg->len);
+  if (struct_return)
+    {
+      store_address (raw_buffer, sizeof (CORE_ADDR), struct_addr);
+      write_memory (sp, raw_buffer, sizeof (CORE_ADDR));
+    }
+
+  /* Load the argument registers.  */
+  for (i = 0; i < required_arg_regs; i++)
+    {
+      LONGEST val;
+
+      val = read_memory_integer (sp + i * 8, 8);
+      write_register (A0_REGNUM + i, val);
+      write_register (FPA0_REGNUM + i, val);
+    }
+
+  return sp + arg_regs_size;
+}
+
+void
+alpha_push_dummy_frame()
+{
+  int ireg;
+  struct linked_proc_info *link;
+  alpha_extra_func_info_t proc_desc;
+  CORE_ADDR sp = read_register (SP_REGNUM);
+  CORE_ADDR save_address;
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  unsigned long mask;
+
+  link = (struct linked_proc_info *) xmalloc(sizeof (struct linked_proc_info));
+  link->next = linked_proc_desc_table;
+  linked_proc_desc_table = link;
+ 
+  proc_desc = &link->info;
+
+  /*
+   * The registers we must save are all those not preserved across
+   * procedure calls.
+   * In addition, we must save the PC and RA.
+   *
+   * Dummy frame layout:
+   *  (high memory)
+   * 	Saved PC
+   *    Saved F30
+   *    ...
+   *    Saved F0
+   *	Saved R29
+   *	...
+   *	Saved R0
+   *	Saved R26 (RA)
+   *	Parameter build area
+   *  (low memory)
+   */
+
+/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<31. */
+#define MASK(i,j) ((((LONGEST)1 << ((j)+1)) - 1) ^ (((LONGEST)1 << (i)) - 1))
+#define GEN_REG_SAVE_MASK (MASK(0,8) | MASK(16,29))
+#define GEN_REG_SAVE_COUNT 24
+#define FLOAT_REG_SAVE_MASK (MASK(0,1) | MASK(10,30))
+#define FLOAT_REG_SAVE_COUNT 23
+  /* The special register is the PC as we have no bit for it in the save masks.
+     alpha_frame_saved_pc knows where the pc is saved in a dummy frame.  */
+#define SPECIAL_REG_SAVE_COUNT 1
+
+  PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
+  PROC_FREG_MASK(proc_desc) = FLOAT_REG_SAVE_MASK;
+  /* PROC_REG_OFFSET is the offset from the dummy frame to the saved RA,
+     but keep SP aligned to a multiple of 16.  */
+  PROC_REG_OFFSET(proc_desc) =
+    - ((8 * (SPECIAL_REG_SAVE_COUNT
+	    + GEN_REG_SAVE_COUNT
+	    + FLOAT_REG_SAVE_COUNT)
+	+ 15) & ~15);
+  PROC_FREG_OFFSET(proc_desc) =
+    PROC_REG_OFFSET(proc_desc) + 8 * GEN_REG_SAVE_COUNT;
+
+  /* Save general registers.
+     The return address register is the first saved register, all other
+     registers follow in ascending order.
+     The PC is saved immediately below the SP.  */
+  save_address = sp + PROC_REG_OFFSET(proc_desc);
+  store_address (raw_buffer, 8, read_register (RA_REGNUM));
+  write_memory (save_address, raw_buffer, 8);
+  save_address += 8;
+  mask = PROC_REG_MASK(proc_desc) & 0xffffffffL;
+  for (ireg = 0; mask; ireg++, mask >>= 1)
+    if (mask & 1)
+      {
+	if (ireg == RA_REGNUM)
+	  continue;
+	store_address (raw_buffer, 8, read_register (ireg));
+	write_memory (save_address, raw_buffer, 8);
+	save_address += 8;
+      }
+
+  store_address (raw_buffer, 8, read_register (PC_REGNUM));
+  write_memory (sp - 8, raw_buffer, 8);
+
+  /* Save floating point registers.  */
+  save_address = sp + PROC_FREG_OFFSET(proc_desc);
+  mask = PROC_FREG_MASK(proc_desc) & 0xffffffffL;
+  for (ireg = 0; mask; ireg++, mask >>= 1)
+    if (mask & 1)
+      {
+	store_address (raw_buffer, 8, read_register (ireg + FP0_REGNUM));
+	write_memory (save_address, raw_buffer, 8);
+	save_address += 8;
+      }
+
+  /* Set and save the frame address for the dummy.  
+     This is tricky. The only registers that are suitable for a frame save
+     are those that are preserved across procedure calls (s0-s6). But if
+     a read system call is interrupted and then a dummy call is made
+     (see testsuite/gdb.t17/interrupt.exp) the dummy call hangs till the read
+     is satisfied. Then it returns with the s0-s6 registers set to the values
+     on entry to the read system call and our dummy frame pointer would be
+     destroyed. So we save the dummy frame in the proc_desc and handle the
+     retrieval of the frame pointer of a dummy specifically. The frame register
+     is set to the virtual frame (pseudo) register, it's value will always
+     be read as zero and will help us to catch any errors in the dummy frame
+     retrieval code.  */
+  PROC_DUMMY_FRAME(proc_desc) = sp;
+  PROC_FRAME_REG(proc_desc) = FP_REGNUM;
+  PROC_FRAME_OFFSET(proc_desc) = 0;
+  sp += PROC_REG_OFFSET(proc_desc);
+  write_register (SP_REGNUM, sp);
+
+  PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS ();
+  PROC_HIGH_ADDR(proc_desc) = PROC_LOW_ADDR(proc_desc) + 4;
+
+  SET_PROC_DESC_IS_DUMMY(proc_desc);
+  PROC_PC_REG(proc_desc) = RA_REGNUM;
+}
+
+void
+alpha_pop_frame()
+{
+  register int regnum;
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR new_sp = frame->frame;
+
+  alpha_extra_func_info_t proc_desc = frame->proc_desc;
+
+  write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
+  if (frame->saved_regs == NULL)
+    alpha_find_saved_regs (frame);
+  if (proc_desc)
+    {
+      for (regnum = 32; --regnum >= 0; )
+	if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+	  write_register (regnum,
+			  read_memory_integer (frame->saved_regs[regnum],
+					       8));
+      for (regnum = 32; --regnum >= 0; )
+	if (PROC_FREG_MASK(proc_desc) & (1 << regnum))
+	  write_register (regnum + FP0_REGNUM,
+			  read_memory_integer (frame->saved_regs[regnum + FP0_REGNUM], 8));
+    }
+  write_register (SP_REGNUM, new_sp);
+  flush_cached_frames ();
+
+  if (proc_desc && (PROC_DESC_IS_DUMMY(proc_desc)
+		    || PROC_DESC_IS_DYN_SIGTRAMP (proc_desc)))
+    {
+      struct linked_proc_info *pi_ptr, *prev_ptr;
+
+      for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL;
+	   pi_ptr != NULL;
+	   prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
+	{
+	  if (&pi_ptr->info == proc_desc)
+	    break;
+	}
+
+      if (pi_ptr == NULL)
+	error ("Can't locate dummy extra frame info\n");
+
+      if (prev_ptr != NULL)
+	prev_ptr->next = pi_ptr->next;
+      else
+	linked_proc_desc_table = pi_ptr->next;
+
+      free (pi_ptr);
+    }
+}
+
+/* To skip prologues, I use this predicate.  Returns either PC itself
+   if the code at PC does not look like a function prologue; otherwise
+   returns an address that (if we're lucky) follows the prologue.  If
+   LENIENT, then we must skip everything which is involved in setting
+   up the frame (it's OK to skip more, just so long as we don't skip
+   anything which might clobber the registers which are being saved.
+   Currently we must not skip more on the alpha, but we might the lenient
+   stuff some day.  */
+
+CORE_ADDR
+alpha_skip_prologue (pc, lenient)
+     CORE_ADDR pc;
+     int lenient;
+{
+    unsigned long inst;
+    int offset;
+    CORE_ADDR post_prologue_pc;
+    char buf[4];
+
+#ifdef GDB_TARGET_HAS_SHARED_LIBS
+    /* Silently return the unaltered pc upon memory errors.
+       This could happen on OSF/1 if decode_line_1 tries to skip the
+       prologue for quickstarted shared library functions when the
+       shared library is not yet mapped in.
+       Reading target memory is slow over serial lines, so we perform
+       this check only if the target has shared libraries.  */
+    if (target_read_memory (pc, buf, 4))
+      return pc;
+#endif
+
+    /* See if we can determine the end of the prologue via the symbol table.
+       If so, then return either PC, or the PC after the prologue, whichever
+       is greater.  */
+
+    post_prologue_pc = after_prologue (pc, NULL);
+
+    if (post_prologue_pc != 0)
+      return max (pc, post_prologue_pc);
+
+    /* Can't determine prologue from the symbol table, need to examine
+       instructions.  */
+
+    /* Skip the typical prologue instructions. These are the stack adjustment
+       instruction and the instructions that save registers on the stack
+       or in the gcc frame.  */
+    for (offset = 0; offset < 100; offset += 4)
+      {
+	int status;
+
+	status = read_memory_nobpt (pc + offset, buf, 4);
+	if (status)
+	  memory_error (status, pc + offset);
+	inst = extract_unsigned_integer (buf, 4);
+
+	/* The alpha has no delay slots. But let's keep the lenient stuff,
+	   we might need it for something else in the future.  */
+	if (lenient && 0)
+	  continue;
+
+	if ((inst & 0xffff0000) == 0x27bb0000)	/* ldah $gp,n($t12) */
+	    continue;
+	if ((inst & 0xffff0000) == 0x23bd0000)	/* lda $gp,n($gp) */
+	    continue;
+	if ((inst & 0xffff0000) == 0x23de0000)	/* lda $sp,n($sp) */
+	    continue;
+	else if ((inst & 0xfc1f0000) == 0xb41e0000
+		 && (inst & 0xffff0000) != 0xb7fe0000)
+	    continue;				/* stq reg,n($sp) */
+						/* reg != $zero */
+	else if ((inst & 0xfc1f0000) == 0x9c1e0000
+		 && (inst & 0xffff0000) != 0x9ffe0000)
+	    continue;				/* stt reg,n($sp) */
+						/* reg != $zero */
+	else if (inst == 0x47de040f)		/* bis sp,sp,fp */
+	    continue;
+	else
+	    break;
+    }
+    return pc + offset;
+}
+
+#if 0
+/* Is address PC in the prologue (loosely defined) for function at
+   STARTADDR?  */
+
+static int
+alpha_in_lenient_prologue (startaddr, pc)
+     CORE_ADDR startaddr;
+     CORE_ADDR pc;
+{
+  CORE_ADDR end_prologue = alpha_skip_prologue (startaddr, 1);
+  return pc >= startaddr && pc < end_prologue;
+}
+#endif
+
+/* The alpha needs a conversion between register and memory format if
+   the register is a floating point register and
+      memory format is float, as the register format must be double
+   or
+      memory format is an integer with 4 bytes or less, as the representation
+      of integers in floating point registers is different. */
+void
+alpha_register_convert_to_virtual (regnum, valtype, raw_buffer, virtual_buffer)
+    int regnum;
+    struct type *valtype;
+    char *raw_buffer;
+    char *virtual_buffer;
+{
+  if (TYPE_LENGTH (valtype) >= REGISTER_RAW_SIZE (regnum))
+    {
+      memcpy (virtual_buffer, raw_buffer, REGISTER_VIRTUAL_SIZE (regnum));
+      return;
+    }
+
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+    {
+      double d = extract_floating (raw_buffer, REGISTER_RAW_SIZE (regnum));
+      store_floating (virtual_buffer, TYPE_LENGTH (valtype), d);
+    }
+  else if (TYPE_CODE (valtype) == TYPE_CODE_INT && TYPE_LENGTH (valtype) <= 4)
+    {
+      ULONGEST l;
+      l = extract_unsigned_integer (raw_buffer, REGISTER_RAW_SIZE (regnum));
+      l = ((l >> 32) & 0xc0000000) | ((l >> 29) & 0x3fffffff);
+      store_unsigned_integer (virtual_buffer, TYPE_LENGTH (valtype), l);
+    }
+  else
+    error ("Cannot retrieve value from floating point register");
+}
+
+void
+alpha_register_convert_to_raw (valtype, regnum, virtual_buffer, raw_buffer)
+    struct type *valtype;
+    int regnum;
+    char *virtual_buffer;
+    char *raw_buffer;
+{
+  if (TYPE_LENGTH (valtype) >= REGISTER_RAW_SIZE (regnum))
+    {
+      memcpy (raw_buffer, virtual_buffer, REGISTER_RAW_SIZE (regnum));
+      return;
+    }
+
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+    {
+      double d = extract_floating (virtual_buffer, TYPE_LENGTH (valtype));
+      store_floating (raw_buffer, REGISTER_RAW_SIZE (regnum), d);
+    }
+  else if (TYPE_CODE (valtype) == TYPE_CODE_INT && TYPE_LENGTH (valtype) <= 4)
+    {
+      ULONGEST l;
+      if (TYPE_UNSIGNED (valtype))
+	l = extract_unsigned_integer (virtual_buffer, TYPE_LENGTH (valtype));
+      else
+	l = extract_signed_integer (virtual_buffer, TYPE_LENGTH (valtype));
+      l = ((l & 0xc0000000) << 32) | ((l & 0x3fffffff) << 29);
+      store_unsigned_integer (raw_buffer, REGISTER_RAW_SIZE (regnum), l);
+    }
+  else
+    error ("Cannot store value in floating point register");
+}
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   extract and copy its value into `valbuf'.  */
+
+void
+alpha_extract_return_value (valtype, regbuf, valbuf)
+    struct type *valtype;
+    char regbuf[REGISTER_BYTES];
+    char *valbuf;
+{
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+    alpha_register_convert_to_virtual (FP0_REGNUM, valtype,
+				       regbuf + REGISTER_BYTE (FP0_REGNUM),
+				       valbuf);
+  else
+    memcpy (valbuf, regbuf + REGISTER_BYTE (V0_REGNUM), TYPE_LENGTH (valtype));
+}
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   write its value into the appropriate register.  */
+
+void
+alpha_store_return_value (valtype, valbuf)
+    struct type *valtype;
+    char *valbuf;
+{
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  int regnum = V0_REGNUM;
+  int length = TYPE_LENGTH (valtype);
+  
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT)
+    {
+      regnum = FP0_REGNUM;
+      length = REGISTER_RAW_SIZE (regnum);
+      alpha_register_convert_to_raw (valtype, regnum, valbuf, raw_buffer);
+    }
+  else
+    memcpy (raw_buffer, valbuf, length);
+
+  write_register_bytes (REGISTER_BYTE (regnum), raw_buffer, length);
+}
+
+/* Just like reinit_frame_cache, but with the right arguments to be
+   callable as an sfunc.  */
+
+static void
+reinit_frame_cache_sfunc (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  reinit_frame_cache ();
+}
+
+/* This is the definition of CALL_DUMMY_ADDRESS.  It's a heuristic that is used
+   to find a convenient place in the text segment to stick a breakpoint to
+   detect the completion of a target function call (ala call_function_by_hand).
+ */
+
+CORE_ADDR
+alpha_call_dummy_address ()
+{
+  CORE_ADDR entry;
+  struct minimal_symbol *sym;
+
+  entry = entry_point_address ();
+
+  if (entry != 0)
+    return entry;
+
+  sym = lookup_minimal_symbol ("_Prelude", NULL, symfile_objfile);
+
+  if (!sym || MSYMBOL_TYPE (sym) != mst_text)
+    return 0;
+  else
+    return SYMBOL_VALUE_ADDRESS (sym) + 4;
+}
+
+void
+_initialize_alpha_tdep ()
+{
+  struct cmd_list_element *c;
+
+  tm_print_insn = print_insn_alpha;
+
+  /* Let the user set the fence post for heuristic_proc_start.  */
+
+  /* We really would like to have both "0" and "unlimited" work, but
+     command.c doesn't deal with that.  So make it a var_zinteger
+     because the user can always use "999999" or some such for unlimited.  */
+  c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
+		   (char *) &heuristic_fence_post,
+		   "\
+Set the distance searched for the start of a function.\n\
+If you are debugging a stripped executable, GDB needs to search through the\n\
+program for the start of a function.  This command sets the distance of the\n\
+search.  The only need to set it is when debugging a stripped executable.",
+		   &setlist);
+  /* We need to throw away the frame cache when we set this, since it
+     might change our ability to get backtraces.  */
+  c->function.sfunc = reinit_frame_cache_sfunc;
+  add_show_from_set (c, &showlist);
+}
diff --git a/gdb/altos-xdep.c b/gdb/altos-xdep.c
new file mode 100644
index 0000000..5727332
--- /dev/null
+++ b/gdb/altos-xdep.c
@@ -0,0 +1,164 @@
+/* Low level interface to ptrace, for GDB when running under m68k SVR2 Unix
+   on Altos 3068.  Report bugs to Jyrki Kuoppala <jkp@cs.hut.fi>
+   Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+#ifdef USG
+#include <sys/page.h>
+#ifdef ALTOS
+#include <sys/net.h>
+#include <errno.h>
+#endif
+#endif
+
+#include "gdbcore.h"
+#include <sys/user.h>		/* After a.out.h  */
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+
+/* Work with core dump and executable files, for GDB. 
+   This code would be in corefile.c if it weren't machine-dependent. */
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  extern char registers[];
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
+      {
+	struct user u;
+
+	unsigned int reg_offset;
+
+	val = myread (corechan, &u, sizeof u);
+	if (val < 0)
+	  perror_with_name ("Not a core file: reading upage");
+	if (val != sizeof u)
+	  error ("Not a core file: could only read %d bytes", val);
+	data_start = exec_data_start;
+
+#if !defined (NBPG)
+#define NBPG NBPP
+#endif
+#if !defined (UPAGES)
+#define UPAGES USIZE
+#endif
+
+	data_end = data_start + NBPG * u.u_dsize;
+	stack_start = stack_end - NBPG * u.u_ssize;
+	data_offset = NBPG * UPAGES + exec_data_start % NBPG /* Not sure about this //jkp */;
+	stack_offset = NBPG * (UPAGES + u.u_dsize);
+
+	/* Some machines put an absolute address in here and some put
+	   the offset in the upage of the regs.  */
+	reg_offset = (int) u.u_state;
+	if (reg_offset > NBPG * UPAGES)
+	  reg_offset -= KERNEL_U_ADDR;
+
+	memcpy (&core_aouthdr, &u.u_exdata, sizeof (AOUTHDR));
+	printf_unfiltered ("Core file is from \"%s\".\n", u.u_comm);
+
+	/* I don't know where to find this info.
+	   So, for now, mark it as not available.  */
+	N_SET_MAGIC (core_aouthdr, 0);
+
+	/* Read the register values out of the core file and store
+	   them where `read_register' will find them.  */
+
+	{
+	  register int regno;
+
+	  for (regno = 0; regno < NUM_REGS; regno++)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      val = lseek (corechan, register_addr (regno, reg_offset), 0);
+	      if (val < 0
+		  || (val = myread (corechan, buf, sizeof buf)) < 0)
+		{
+		  char * buffer = (char *) alloca (strlen (REGISTER_NAME (regno))
+						   + 30);
+		  strcpy (buffer, "Reading register ");
+		  strcat (buffer, REGISTER_NAME (regno));
+						   
+		  perror_with_name (buffer);
+		}
+
+	      supply_register (regno, buf);
+	    }
+	}
+      }
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	{
+	  corefile = concat (current_directory, "/", filename, NULL);
+	}
+
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+      validate_files ();
+    }
+  else if (from_tty)
+    printf_unfiltered ("No core file now.\n");
+}
diff --git a/gdb/annotate.c b/gdb/annotate.c
new file mode 100644
index 0000000..ec3e424
--- /dev/null
+++ b/gdb/annotate.c
@@ -0,0 +1,577 @@
+/* Annotation routines for GDB.
+   Copyright 1986, 89, 90, 91, 92, 95, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "annotate.h"
+#include "value.h"
+#include "target.h"
+#include "gdbtypes.h"
+#include "breakpoint.h"
+
+
+/* Prototypes for local functions. */
+
+static void print_value_flags PARAMS ((struct type *));
+
+static void breakpoint_changed PARAMS ((struct breakpoint *));
+
+void (*annotate_starting_hook) PARAMS ((void));
+void (*annotate_stopped_hook) PARAMS ((void));
+void (*annotate_signalled_hook) PARAMS ((void));
+void (*annotate_exited_hook) PARAMS ((void));
+
+static void
+print_value_flags (t)
+     struct type *t;
+{
+  if (can_dereference (t))
+    printf_filtered ("*");
+  else
+    printf_filtered ("-");
+}
+
+void
+breakpoints_changed ()
+{
+  if (annotation_level > 1)
+    {
+      target_terminal_ours ();
+      printf_unfiltered ("\n\032\032breakpoints-invalid\n");
+    }
+}
+
+void
+annotate_breakpoint (num)
+     int num;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032breakpoint %d\n", num);
+}
+
+void
+annotate_catchpoint (num)
+     int num;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032catchpoint %d\n", num);
+}
+
+void
+annotate_watchpoint (num)
+     int num;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032watchpoint %d\n", num);
+}
+
+void
+annotate_starting ()
+{
+
+  if (annotate_starting_hook)
+    annotate_starting_hook ();
+  else
+    {
+      if (annotation_level > 1)
+        {
+          printf_filtered ("\n\032\032starting\n");
+        }
+    }
+}
+
+void
+annotate_stopped ()
+{
+  if (annotate_stopped_hook)
+    annotate_stopped_hook ();
+  else
+    {
+      if (annotation_level > 1)
+        printf_filtered ("\n\032\032stopped\n");
+    }
+}
+
+void
+annotate_exited (exitstatus)
+     int exitstatus;
+{
+  if (annotate_exited_hook)
+    annotate_exited_hook ();
+  else
+    {
+      if (annotation_level > 1)
+        printf_filtered ("\n\032\032exited %d\n", exitstatus);
+    }
+}
+
+void
+annotate_signalled ()
+{
+  if (annotate_signalled_hook)
+    annotate_signalled_hook ();
+
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signalled\n");
+}
+
+void
+annotate_signal_name ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal-name\n");
+}
+
+void
+annotate_signal_name_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal-name-end\n");
+}
+
+void
+annotate_signal_string ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal-string\n");
+}
+
+void
+annotate_signal_string_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal-string-end\n");
+}
+
+void
+annotate_signal ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal\n");
+}
+
+void
+annotate_breakpoints_headers ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032breakpoints-headers\n");
+}
+
+void
+annotate_field (num)
+     int num;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032field %d\n", num);
+}
+
+void
+annotate_breakpoints_table ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032breakpoints-table\n");
+}
+
+void
+annotate_record ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032record\n");
+}
+
+void
+annotate_breakpoints_table_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032breakpoints-table-end\n");
+}
+
+void
+annotate_frames_invalid ()
+{
+  if (annotation_level > 1)
+    {
+      target_terminal_ours ();
+      printf_unfiltered ("\n\032\032frames-invalid\n");
+    }
+}
+
+void
+annotate_field_begin (type)
+     struct type *type;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032field-begin ");
+      print_value_flags (type);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_field_name_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032field-name-end\n");
+}
+
+void
+annotate_field_value ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032field-value\n");
+}
+
+void
+annotate_field_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032field-end\n");
+}
+
+void
+annotate_quit ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032quit\n");
+}
+
+void
+annotate_error ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032error\n");
+}
+
+void
+annotate_error_begin ()
+{
+  if (annotation_level > 1)
+    fprintf_filtered (gdb_stderr, "\n\032\032error-begin\n");
+}
+
+void
+annotate_value_history_begin (histindex, type)
+     int histindex;
+     struct type *type;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032value-history-begin %d ", histindex);
+      print_value_flags (type);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_value_begin (type)
+     struct type *type;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032value-begin ");
+      print_value_flags (type);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_value_history_value ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032value-history-value\n");
+}
+
+void
+annotate_value_history_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032value-history-end\n");
+}
+
+void
+annotate_value_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032value-end\n");
+}
+
+void
+annotate_display_begin ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-begin\n");
+}
+
+void
+annotate_display_number_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-number-end\n");
+}
+
+void
+annotate_display_format ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-format\n");
+}
+
+void
+annotate_display_expression ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-expression\n");
+}
+
+void
+annotate_display_expression_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-expression-end\n");
+}
+
+void
+annotate_display_value ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-value\n");
+}
+
+void
+annotate_display_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032display-end\n");
+}
+
+void
+annotate_arg_begin ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032arg-begin\n");
+}
+
+void
+annotate_arg_name_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032arg-name-end\n");
+}
+
+void
+annotate_arg_value (type)
+     struct type *type;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032arg-value ");
+      print_value_flags (type);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_arg_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032arg-end\n");
+}
+
+void
+annotate_source (filename, line, character, mid, pc)
+     char *filename;
+     int line;
+     int character;
+     int mid;
+     CORE_ADDR pc;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032source ");
+  else
+    printf_filtered ("\032\032");
+
+  printf_filtered ("%s:%d:%d:%s:0x", filename,
+		   line, character,
+		   mid ? "middle" : "beg");
+  print_address_numeric (pc, 0, gdb_stdout);
+  printf_filtered ("\n");
+}
+
+void
+annotate_frame_begin (level, pc)
+     int level;
+     CORE_ADDR pc;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032frame-begin %d 0x", level);
+      print_address_numeric (pc, 0, gdb_stdout);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_function_call ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032function-call\n");
+}
+
+void
+annotate_signal_handler_caller ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032signal-handler-caller\n");
+}
+
+void
+annotate_frame_address ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-address\n");
+}
+
+void
+annotate_frame_address_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-address-end\n");
+}
+
+void
+annotate_frame_function_name ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-function-name\n");
+}
+
+void
+annotate_frame_args ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-args\n");
+}
+
+void
+annotate_frame_source_begin ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-source-begin\n");
+}
+
+void
+annotate_frame_source_file ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-source-file\n");
+}
+
+void
+annotate_frame_source_file_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-source-file-end\n");
+}
+
+void
+annotate_frame_source_line ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-source-line\n");
+}
+
+void
+annotate_frame_source_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-source-end\n");
+}
+
+void
+annotate_frame_where ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-where\n");
+}
+
+void
+annotate_frame_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032frame-end\n");
+}
+
+void
+annotate_array_section_begin (index, elttype)
+     int index;
+     struct type *elttype;
+{
+  if (annotation_level > 1)
+    {
+      printf_filtered ("\n\032\032array-section-begin %d ", index);
+      print_value_flags (elttype);
+      printf_filtered ("\n");
+    }
+}
+
+void
+annotate_elt_rep (repcount)
+     unsigned int repcount;
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032elt-rep %u\n", repcount);
+}
+
+void
+annotate_elt_rep_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032elt-rep-end\n");
+}
+
+void
+annotate_elt ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032elt\n");
+}
+
+void
+annotate_array_section_end ()
+{
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032array-section-end\n");
+}
+
+static void
+breakpoint_changed (b)
+     struct breakpoint *b;
+{
+  breakpoints_changed ();
+}
+
+void
+_initialize_annotate ()
+{
+  if (annotation_level > 1)
+    {
+      delete_breakpoint_hook = breakpoint_changed;
+      modify_breakpoint_hook = breakpoint_changed;
+    }
+}
diff --git a/gdb/annotate.h b/gdb/annotate.h
new file mode 100644
index 0000000..59739db
--- /dev/null
+++ b/gdb/annotate.h
@@ -0,0 +1,104 @@
+/* Annotation routines for GDB.
+   Copyright 1986, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "symtab.h"
+#include "gdbtypes.h"
+
+extern void breakpoints_changed PARAMS ((void));
+
+extern void annotate_breakpoint PARAMS ((int));
+extern void annotate_catchpoint PARAMS ((int));
+extern void annotate_watchpoint PARAMS ((int));
+extern void annotate_starting PARAMS ((void));
+extern void annotate_stopped PARAMS ((void));
+extern void annotate_exited PARAMS ((int));
+extern void annotate_signalled PARAMS ((void));
+extern void annotate_signal_name PARAMS ((void));
+extern void annotate_signal_name_end PARAMS ((void));
+extern void annotate_signal_string PARAMS ((void));
+extern void annotate_signal_string_end PARAMS ((void));
+extern void annotate_signal PARAMS ((void));
+
+extern void annotate_breakpoints_headers PARAMS ((void));
+extern void annotate_field PARAMS ((int));
+extern void annotate_breakpoints_table PARAMS ((void));
+extern void annotate_record PARAMS ((void));
+extern void annotate_breakpoints_table_end PARAMS ((void));
+
+extern void annotate_frames_invalid PARAMS ((void));
+
+#ifdef __STDC__
+struct type;
+#endif
+
+extern void annotate_field_begin PARAMS ((struct type *));
+extern void annotate_field_name_end PARAMS ((void));
+extern void annotate_field_value PARAMS ((void));
+extern void annotate_field_end PARAMS ((void));
+
+extern void annotate_quit PARAMS ((void));
+extern void annotate_error PARAMS ((void));
+extern void annotate_error_begin PARAMS ((void));
+
+extern void annotate_value_history_begin PARAMS ((int, struct type *));
+extern void annotate_value_begin PARAMS ((struct type *));
+extern void annotate_value_history_value PARAMS ((void));
+extern void annotate_value_history_end PARAMS ((void));
+extern void annotate_value_end PARAMS ((void));
+
+extern void annotate_display_begin PARAMS ((void));
+extern void annotate_display_number_end PARAMS ((void));
+extern void annotate_display_format PARAMS ((void));
+extern void annotate_display_expression PARAMS ((void));
+extern void annotate_display_expression_end PARAMS ((void));
+extern void annotate_display_value PARAMS ((void));
+extern void annotate_display_end PARAMS ((void));
+
+extern void annotate_arg_begin PARAMS ((void));
+extern void annotate_arg_name_end PARAMS ((void));
+extern void annotate_arg_value PARAMS ((struct type *));
+extern void annotate_arg_end PARAMS ((void));
+
+extern void annotate_source PARAMS ((char *, int, int, int, CORE_ADDR));
+
+extern void annotate_frame_begin PARAMS ((int, CORE_ADDR));
+extern void annotate_function_call PARAMS ((void));
+extern void annotate_signal_handler_caller PARAMS ((void));
+extern void annotate_frame_address PARAMS ((void));
+extern void annotate_frame_address_end PARAMS ((void));
+extern void annotate_frame_function_name PARAMS ((void));
+extern void annotate_frame_args PARAMS ((void));
+extern void annotate_frame_source_begin PARAMS ((void));
+extern void annotate_frame_source_file PARAMS ((void));
+extern void annotate_frame_source_file_end PARAMS ((void));
+extern void annotate_frame_source_line PARAMS ((void));
+extern void annotate_frame_source_end PARAMS ((void));
+extern void annotate_frame_where PARAMS ((void));
+extern void annotate_frame_end PARAMS ((void));
+
+extern void annotate_array_section_begin PARAMS ((int, struct type *));
+extern void annotate_elt_rep PARAMS ((unsigned int));
+extern void annotate_elt_rep_end PARAMS ((void));
+extern void annotate_elt PARAMS ((void));
+extern void annotate_array_section_end PARAMS ((void));
+
+extern void (*annotate_starting_hook) PARAMS ((void));
+extern void (*annotate_stopped_hook) PARAMS ((void));
+extern void (*annotate_signalled_hook) PARAMS ((void));
+extern void (*annotate_exited_hook) PARAMS ((void));
diff --git a/gdb/arc-tdep.c b/gdb/arc-tdep.c
new file mode 100644
index 0000000..9295770
--- /dev/null
+++ b/gdb/arc-tdep.c
@@ -0,0 +1,733 @@
+/* ARC target-dependent stuff.
+   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "floatformat.h"
+#include "symtab.h"
+#include "gdbcmd.h"
+
+/* Current CPU, set with the "set cpu" command.  */
+static int arc_bfd_mach_type;
+char *arc_cpu_type;
+char *tmp_arc_cpu_type;
+
+/* Table of cpu names.  */
+struct {
+  char *name;
+  int value;
+} arc_cpu_type_table[] = {
+  { "base", bfd_mach_arc_base },
+  { NULL, 0 }
+};
+
+/* Used by simulator.  */
+int display_pipeline_p;
+int cpu_timer;
+/* This one must have the same type as used in the emulator.
+   It's currently an enum so this should be ok for now.  */
+int debug_pipeline_p;
+
+#define ARC_CALL_SAVED_REG(r) ((r) >= 16 && (r) < 24)
+
+#define OPMASK	0xf8000000
+
+/* Instruction field accessor macros.
+   See the Programmer's Reference Manual.  */
+#define X_OP(i) (((i) >> 27) & 0x1f)
+#define X_A(i) (((i) >> 21) & 0x3f)
+#define X_B(i) (((i) >> 15) & 0x3f)
+#define X_C(i) (((i) >> 9) & 0x3f)
+#define X_D(i) ((((i) & 0x1ff) ^ 0x100) - 0x100)
+#define X_L(i) (((((i) >> 5) & 0x3ffffc) ^ 0x200000) - 0x200000)
+#define X_N(i) (((i) >> 5) & 3)
+#define X_Q(i) ((i) & 0x1f)
+
+/* Return non-zero if X is a short immediate data indicator.  */
+#define SHIMM_P(x) ((x) == 61 || (x) == 63)
+
+/* Return non-zero if X is a "long" (32 bit) immediate data indicator.  */
+#define LIMM_P(x) ((x) == 62)
+
+/* Build a simple instruction.  */
+#define BUILD_INSN(op, a, b, c, d) \
+  ((((op) & 31) << 27) \
+   | (((a) & 63) << 21) \
+   | (((b) & 63) << 15) \
+   | (((c) & 63) << 9) \
+   | ((d) & 511))
+
+/* Codestream stuff.  */
+static void codestream_read PARAMS ((unsigned int *, int));
+static void codestream_seek PARAMS ((CORE_ADDR));
+static unsigned int codestream_fill PARAMS ((int));
+
+#define CODESTREAM_BUFSIZ 16 
+static CORE_ADDR codestream_next_addr;
+static CORE_ADDR codestream_addr;
+static unsigned int codestream_buf[CODESTREAM_BUFSIZ];
+static int codestream_off;
+static int codestream_cnt;
+
+#define codestream_tell() \
+  (codestream_addr + codestream_off * sizeof (codestream_buf[0]))
+#define codestream_peek() \
+  (codestream_cnt == 0 \
+   ? codestream_fill (1) \
+   : codestream_buf[codestream_off])
+#define codestream_get() \
+  (codestream_cnt-- == 0 \
+   ? codestream_fill (0) \
+   : codestream_buf[codestream_off++])
+
+static unsigned int 
+codestream_fill (peek_flag)
+    int peek_flag;
+{
+  codestream_addr = codestream_next_addr;
+  codestream_next_addr += CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]);
+  codestream_off = 0;
+  codestream_cnt = CODESTREAM_BUFSIZ;
+  read_memory (codestream_addr, (char *) codestream_buf,
+	       CODESTREAM_BUFSIZ * sizeof (codestream_buf[0]));
+  /* FIXME: check return code?  */
+
+  /* Handle byte order differences.  */
+  if (HOST_BYTE_ORDER != TARGET_BYTE_ORDER)
+    {
+      register unsigned int i, j, n = sizeof (codestream_buf[0]);
+      register char tmp, *p;
+      for (i = 0, p = (char *) codestream_buf; i < CODESTREAM_BUFSIZ;
+	   ++i, p += n)
+	for (j = 0; j < n / 2; ++j)
+	  tmp = p[j], p[j] = p[n - 1 - j], p[n - 1 - j] = tmp;
+    }
+  
+  if (peek_flag)
+    return codestream_peek ();
+  else
+    return codestream_get ();
+}
+
+static void
+codestream_seek (place)
+    CORE_ADDR place;
+{
+  codestream_next_addr = place / CODESTREAM_BUFSIZ;
+  codestream_next_addr *= CODESTREAM_BUFSIZ;
+  codestream_cnt = 0;
+  codestream_fill (1);
+  while (codestream_tell () != place)
+    codestream_get ();
+}
+
+/* This function is currently unused but leave in for now.  */
+
+static void
+codestream_read (buf, count)
+     unsigned int *buf;
+     int count;
+{
+  unsigned int *p;
+  int i;
+  p = buf;
+  for (i = 0; i < count; i++)
+    *p++ = codestream_get ();
+}
+
+/* Set up prologue scanning and return the first insn.  */
+
+static unsigned int
+setup_prologue_scan (pc)
+     CORE_ADDR pc;
+{
+  unsigned int insn;
+
+  codestream_seek (pc);
+  insn = codestream_get ();
+
+  return insn;
+}
+
+/*
+ * Find & return amount a local space allocated, and advance codestream to
+ * first register push (if any).
+ * If entry sequence doesn't make sense, return -1, and leave 
+ * codestream pointer random.
+ */
+
+static long
+arc_get_frame_setup (pc)
+     CORE_ADDR pc;
+{
+  unsigned int insn;
+  /* Size of frame or -1 if unrecognizable prologue.  */
+  int frame_size = -1;
+  /* An initial "sub sp,sp,N" may or may not be for a stdarg fn.  */
+  int maybe_stdarg_decr = -1;
+
+  insn = setup_prologue_scan (pc);
+
+  /* The authority for what appears here is the home-grown ABI.
+     The most recent version is 1.2.  */
+
+  /* First insn may be "sub sp,sp,N" if stdarg fn.  */
+  if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
+      == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
+    {
+      maybe_stdarg_decr = X_D (insn);
+      insn = codestream_get ();
+    }
+
+  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))	/* st blink,[sp,4] */
+      == BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
+    {
+      insn = codestream_get ();
+      /* Frame may not be necessary, even though blink is saved.
+	 At least this is something we recognize.  */
+      frame_size = 0;
+    }
+
+  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))		/* st fp,[sp] */
+      == BUILD_INSN (2, 0, SP_REGNUM, FP_REGNUM, 0))
+    {	
+      insn = codestream_get ();
+      if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
+	       != BUILD_INSN (12, FP_REGNUM, SP_REGNUM, SP_REGNUM, 0))
+	return -1;
+
+      /* Check for stack adjustment sub sp,sp,N.  */
+      insn = codestream_peek ();
+      if ((insn & BUILD_INSN (-1, -1, -1, 0, 0))
+	  == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, 0, 0))
+	{
+	  if (LIMM_P (X_C (insn)))
+	    frame_size = codestream_get ();
+	  else if (SHIMM_P (X_C (insn)))
+	    frame_size = X_D (insn);
+	  else
+	    return -1;
+	  if (frame_size < 0)
+	    return -1;
+
+          codestream_get ();
+
+	  /* This sequence is used to get the address of the return
+	     buffer for a function that returns a structure.  */
+	  insn = codestream_peek ();
+	  if (insn & OPMASK == 0x60000000)
+	    codestream_get ();
+	}
+      /* Frameless fn.  */
+      else
+	{
+	  frame_size = 0;
+	}
+    }
+
+  /* If we found a "sub sp,sp,N" and nothing else, it may or may not be a
+     stdarg fn.  The stdarg decrement is not treated as part of the frame size,
+     so we have a dilemma: what do we return?  For now, if we get a
+     "sub sp,sp,N" and nothing else assume this isn't a stdarg fn.  One way
+     to fix this completely would be to add a bit to the function descriptor
+     that says the function is a stdarg function.  */
+
+  if (frame_size < 0 && maybe_stdarg_decr > 0)
+    return maybe_stdarg_decr;
+  return frame_size;
+}
+
+/* Given a pc value, skip it forward past the function prologue by
+   disassembling instructions that appear to be a prologue.
+
+   If FRAMELESS_P is set, we are only testing to see if the function
+   is frameless.  If it is a frameless function, return PC unchanged.
+   This allows a quicker answer.  */
+
+CORE_ADDR
+skip_prologue (pc, frameless_p)
+     CORE_ADDR pc;
+     int frameless_p;
+{
+  unsigned int insn;
+  int i, frame_size;
+
+  if ((frame_size = arc_get_frame_setup (pc)) < 0)
+    return (pc);
+
+  if (frameless_p)
+    return frame_size == 0 ? pc : codestream_tell ();
+
+  /* Skip over register saves.  */
+  for (i = 0; i < 8; i++)
+    {
+      insn = codestream_peek ();
+      if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
+	  != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
+	break; /* not st insn */
+      if (! ARC_CALL_SAVED_REG (X_C (insn)))
+	break;
+      codestream_get ();
+    }
+
+  return codestream_tell ();
+}
+
+/* Return the return address for a frame.
+   This is used to implement FRAME_SAVED_PC.
+   This is taken from frameless_look_for_prologue.  */
+
+CORE_ADDR
+arc_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR func_start;
+  unsigned int insn;
+
+  func_start = get_pc_function_start (frame->pc) + FUNCTION_START_OFFSET;
+  if (func_start == 0)
+    {
+      /* Best guess.  */
+      return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
+    }
+
+  /* The authority for what appears here is the home-grown ABI.
+     The most recent version is 1.2.  */
+
+  insn = setup_prologue_scan (func_start);
+
+  /* First insn may be "sub sp,sp,N" if stdarg fn.  */
+  if ((insn & BUILD_INSN (-1, -1, -1, -1, 0))
+      == BUILD_INSN (10, SP_REGNUM, SP_REGNUM, SHIMM_REGNUM, 0))
+    insn = codestream_get ();
+
+  /* If the next insn is "st blink,[sp,4]" we can get blink from there.
+     Otherwise this is a leaf function and we can use blink.  Note that
+     this still allows for the case where a leaf function saves/clobbers/
+     restores blink.  */
+
+  if ((insn & BUILD_INSN (-1, 0, -1, -1, -1))	/* st blink,[sp,4] */
+      != BUILD_INSN (2, 0, SP_REGNUM, BLINK_REGNUM, 4))
+    return ARC_PC_TO_REAL_ADDRESS (read_register (BLINK_REGNUM));
+  else
+    return ARC_PC_TO_REAL_ADDRESS (read_memory_integer (FRAME_FP (frame) + 4, 4));
+}
+
+/*
+ * Parse the first few instructions of the function to see
+ * what registers were stored.
+ *
+ * The startup sequence can be at the start of the function.
+ * 'st blink,[sp+4], st fp,[sp], mov fp,sp' 
+ *
+ * Local space is allocated just below by sub sp,sp,nnn.
+ * Next, the registers used by this function are stored (as offsets from sp).
+ */
+
+void
+frame_find_saved_regs (fip, fsrp)
+     struct frame_info *fip;
+     struct frame_saved_regs *fsrp;
+{
+  long locals;
+  unsigned int insn;
+  CORE_ADDR dummy_bottom;
+  CORE_ADDR adr;
+  int i, regnum, offset;
+
+  memset (fsrp, 0, sizeof *fsrp);
+
+  /* If frame is the end of a dummy, compute where the beginning would be.  */
+  dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
+
+  /* Check if the PC is in the stack, in a dummy frame.  */
+  if (dummy_bottom <= fip->pc && fip->pc <= fip->frame) 
+    {
+      /* all regs were saved by push_call_dummy () */
+      adr = fip->frame;
+      for (i = 0; i < NUM_REGS; i++) 
+	{
+	  adr -= REGISTER_RAW_SIZE (i);
+	  fsrp->regs[i] = adr;
+	}
+      return;
+    }
+
+  locals = arc_get_frame_setup (get_pc_function_start (fip->pc));
+
+  if (locals >= 0) 
+    {
+      /* Set `adr' to the value of `sp'.  */
+      adr = fip->frame - locals;
+      for (i = 0; i < 8; i++)
+	{
+	  insn = codestream_get ();
+	  if ((insn & BUILD_INSN (-1, 0, -1, 0, 0))
+	       != BUILD_INSN (2, 0, SP_REGNUM, 0, 0))
+	    break;
+          regnum = X_C (insn);
+	  offset = X_D (insn);
+	  fsrp->regs[regnum] = adr + offset;
+	}
+    }
+
+  fsrp->regs[PC_REGNUM] = fip->frame + 4;
+  fsrp->regs[FP_REGNUM] = fip->frame;
+}
+
+void
+push_dummy_frame ()
+{
+  CORE_ADDR sp = read_register (SP_REGNUM);
+  int regnum;
+  char regbuf[MAX_REGISTER_RAW_SIZE];
+
+  read_register_gen (PC_REGNUM, regbuf);
+  write_memory (sp+4, regbuf, REGISTER_SIZE);
+  read_register_gen (FP_REGNUM, regbuf);
+  write_memory (sp, regbuf, REGISTER_SIZE);
+  write_register (FP_REGNUM, sp);
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    {
+      read_register_gen (regnum, regbuf);
+      sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
+    }
+  sp += (2*REGISTER_SIZE);
+  write_register (SP_REGNUM, sp);
+}
+
+void
+pop_frame ()
+{
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR fp;
+  int regnum;
+  struct frame_saved_regs fsr;
+  char regbuf[MAX_REGISTER_RAW_SIZE];
+  
+  fp = FRAME_FP (frame);
+  get_frame_saved_regs (frame, &fsr);
+  for (regnum = 0; regnum < NUM_REGS; regnum++) 
+    {
+      CORE_ADDR adr;
+      adr = fsr.regs[regnum];
+      if (adr)
+	{
+	  read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
+	  write_register_bytes (REGISTER_BYTE (regnum), regbuf,
+				REGISTER_RAW_SIZE (regnum));
+	}
+    }
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
+  write_register (SP_REGNUM, fp + 8);
+  flush_cached_frames ();
+}
+
+/* Simulate single-step.  */
+
+typedef enum
+{
+  NORMAL4, /* a normal 4 byte insn */
+  NORMAL8, /* a normal 8 byte insn */
+  BRANCH4, /* a 4 byte branch insn, including ones without delay slots */
+  BRANCH8, /* an 8 byte branch insn, including ones with delay slots */
+} insn_type;
+
+/* Return the type of INSN and store in TARGET the destination address of a
+   branch if this is one.  */
+/* ??? Need to verify all cases are properly handled.  */
+
+static insn_type
+get_insn_type (insn, pc, target)
+     unsigned long insn;
+     CORE_ADDR pc, *target;
+{
+  unsigned long limm;
+
+  switch (insn >> 27)
+    {
+    case 0 : case 1 : case 2 : /* load/store insns */
+      if (LIMM_P (X_A (insn))
+	  || LIMM_P (X_B (insn))
+	  || LIMM_P (X_C (insn)))
+	return NORMAL8;
+      return NORMAL4;
+    case 4 : case 5 : case 6 : /* branch insns */
+      *target = pc + 4 + X_L (insn);
+      /* ??? It isn't clear that this is always the right answer.
+	 The problem occurs when the next insn is an 8 byte insn.  If the
+	 branch is conditional there's no worry as there shouldn't be an 8
+	 byte insn following.  The programmer may be cheating if s/he knows
+	 the branch will never be taken, but we don't deal with that.
+	 Note that the programmer is also allowed to play games by putting
+	 an insn with long immediate data in the delay slot and then duplicate
+	 the long immediate data at the branch target.  Ugh!  */
+      if (X_N (insn) == 0)
+	return BRANCH4;
+      return BRANCH8;
+    case 7 : /* jump insns */
+      if (LIMM_P (X_B (insn)))
+	{
+	  limm = read_memory_integer (pc + 4, 4);
+	  *target = ARC_PC_TO_REAL_ADDRESS (limm);
+	  return BRANCH8;
+	}
+      if (SHIMM_P (X_B (insn)))
+	*target = ARC_PC_TO_REAL_ADDRESS (X_D (insn));
+      else
+	*target = ARC_PC_TO_REAL_ADDRESS (read_register (X_B (insn)));
+      if (X_Q (insn) == 0 && X_N (insn) == 0)
+	return BRANCH4;
+      return BRANCH8;
+    default : /* arithmetic insns, etc. */
+      if (LIMM_P (X_A (insn))
+	  || LIMM_P (X_B (insn))
+	  || LIMM_P (X_C (insn)))
+	return NORMAL8;
+      return NORMAL4;
+    }
+}
+
+/* single_step() is called just before we want to resume the inferior, if we
+   want to single-step it but there is no hardware or kernel single-step
+   support.  We find all the possible targets of the coming instruction and
+   breakpoint them.
+
+   single_step is also called just after the inferior stops.  If we had
+   set up a simulated single-step, we undo our damage.  */
+
+void
+arc_software_single_step (ignore, insert_breakpoints_p)
+     enum target_signal ignore; /* sig but we don't need it */
+     int insert_breakpoints_p;
+{
+  static CORE_ADDR next_pc, target;
+  static int brktrg_p;
+  typedef char binsn_quantum[BREAKPOINT_MAX];
+  static binsn_quantum break_mem[2];
+
+  if (insert_breakpoints_p)
+    {
+      insn_type type;
+      CORE_ADDR pc;
+      unsigned long insn;
+
+      pc = read_register (PC_REGNUM);
+      insn = read_memory_integer (pc, 4);
+      type = get_insn_type (insn, pc, &target);
+
+      /* Always set a breakpoint for the insn after the branch.  */
+      next_pc = pc + ((type == NORMAL8 || type == BRANCH8) ? 8 : 4);
+      target_insert_breakpoint (next_pc, break_mem[0]);
+
+      brktrg_p = 0;
+
+      if ((type == BRANCH4 || type == BRANCH8)
+	  /* Watch out for branches to the following location.
+	     We just stored a breakpoint there and another call to
+	     target_insert_breakpoint will think the real insn is the
+	     breakpoint we just stored there.  */
+	  && target != next_pc)
+	{
+	  brktrg_p = 1;
+	  target_insert_breakpoint (target, break_mem[1]);
+	}
+
+    }
+  else
+    {
+      /* Remove breakpoints.  */
+      target_remove_breakpoint (next_pc, break_mem[0]);
+
+      if (brktrg_p)
+	target_remove_breakpoint (target, break_mem[1]);
+
+      /* Fix the pc.  */
+      stop_pc -= DECR_PC_AFTER_BREAK;
+      write_pc (stop_pc);
+    }
+}
+
+#ifdef GET_LONGJMP_TARGET
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target(pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR sp, jb_addr;
+
+  sp = read_register (SP_REGNUM);
+
+  if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
+			  buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+#endif /* GET_LONGJMP_TARGET */
+
+/* Disassemble one instruction.  */
+
+static int
+arc_print_insn (vma, info)
+     bfd_vma vma;
+     disassemble_info *info;
+{
+  static int current_mach;
+  static int current_endian;
+  static disassembler_ftype current_disasm;
+
+  if (current_disasm == NULL
+      || arc_bfd_mach_type != current_mach
+      || TARGET_BYTE_ORDER != current_endian)
+    {
+      current_mach = arc_bfd_mach_type;
+      current_endian = TARGET_BYTE_ORDER;
+      current_disasm = arc_get_disassembler (current_mach,
+					     current_endian == BIG_ENDIAN);
+    }
+
+  return (*current_disasm) (vma, info);
+}
+
+/* Command to set cpu type.  */
+
+void
+arc_set_cpu_type_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int i;
+
+  if (tmp_arc_cpu_type == NULL || *tmp_arc_cpu_type == '\0')
+    {
+      printf_unfiltered ("The known ARC cpu types are as follows:\n");
+      for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
+	printf_unfiltered ("%s\n", arc_cpu_type_table[i].name);
+
+      /* Restore the value.  */
+      tmp_arc_cpu_type = strsave (arc_cpu_type);
+
+      return;
+    }
+  
+  if (!arc_set_cpu_type (tmp_arc_cpu_type))
+    {
+      error ("Unknown cpu type `%s'.", tmp_arc_cpu_type);
+      /* Restore its value.  */
+      tmp_arc_cpu_type = strsave (arc_cpu_type);
+    }
+}
+
+static void
+arc_show_cpu_type_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+}
+
+/* Modify the actual cpu type.
+   Result is a boolean indicating success.  */
+
+int
+arc_set_cpu_type (str)
+     char *str;
+{
+  int i, j;
+
+  if (str == NULL)
+    return 0;
+
+  for (i = 0; arc_cpu_type_table[i].name != NULL; ++i)
+    {
+      if (strcasecmp (str, arc_cpu_type_table[i].name) == 0)
+	{
+	  arc_cpu_type = str;
+	  arc_bfd_mach_type = arc_cpu_type_table[i].value;
+	  return 1;
+	}
+    }
+
+  return 0;
+}
+
+void
+_initialize_arc_tdep ()
+{
+  struct cmd_list_element *c;
+
+  c = add_set_cmd ("cpu", class_support, var_string_noescape,
+		   (char *) &tmp_arc_cpu_type,
+		   "Set the type of ARC cpu in use.\n\
+This command has two purposes.  In a multi-cpu system it lets one\n\
+change the cpu being debugged.  It also gives one access to\n\
+cpu-type-specific registers and recognize cpu-type-specific instructions.\
+",
+		   &setlist);
+  c->function.cfunc = arc_set_cpu_type_command;
+  c = add_show_from_set (c, &showlist);
+  c->function.cfunc = arc_show_cpu_type_command;
+
+  /* We have to use strsave here because the `set' command frees it before
+     setting a new value.  */
+  tmp_arc_cpu_type = strsave (DEFAULT_ARC_CPU_TYPE);
+  arc_set_cpu_type (tmp_arc_cpu_type);
+
+  c = add_set_cmd ("displaypipeline", class_support, var_zinteger,
+		   (char *) &display_pipeline_p,
+		   "Set pipeline display (simulator only).\n\
+When enabled, the state of the pipeline after each cycle is displayed.",
+		   &setlist);
+  c = add_show_from_set (c, &showlist);
+
+  c = add_set_cmd ("debugpipeline", class_support, var_zinteger,
+		   (char *) &debug_pipeline_p,
+		   "Set pipeline debug display (simulator only).\n\
+When enabled, debugging information about the pipeline is displayed.",
+		   &setlist);
+  c = add_show_from_set (c, &showlist);
+
+  c = add_set_cmd ("cputimer", class_support, var_zinteger,
+		   (char *) &cpu_timer,
+		   "Set maximum cycle count (simulator only).\n\
+Control will return to gdb if the timer expires.\n\
+A negative value disables the timer.",
+		   &setlist);
+  c = add_show_from_set (c, &showlist);
+
+  tm_print_insn = arc_print_insn;
+}
diff --git a/gdb/arm-convert.s b/gdb/arm-convert.s
new file mode 100644
index 0000000..416132b
--- /dev/null
+++ b/gdb/arm-convert.s
@@ -0,0 +1,16 @@
+	.text
+	.global	_convert_from_extended
+
+_convert_from_extended:
+
+	ldfe	f0,[a1]
+	stfd	f0,[a2]
+	movs	pc,lr
+
+	.global	_convert_to_extended
+
+_convert_to_extended:
+
+	ldfd	f0,[a1]
+	stfe	f0,[a2]
+	movs	pc,lr
diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
new file mode 100644
index 0000000..607dc8f
--- /dev/null
+++ b/gdb/arm-tdep.c
@@ -0,0 +1,1626 @@
+/* Target-dependent code for the Acorn Risc Machine, for GDB, the GNU Debugger.
+   Copyright (C) 1988, 1989, 1991, 1992, 1993, 1995, 1996, 1998, 1999
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "gdb_string.h"
+#include "coff/internal.h"	/* Internal format of COFF symbols in BFD */
+
+/*
+  The following macros are actually wrong.  Neither arm nor thumb can
+  or should set the lsb on addr.
+  The thumb addresses are mod 2, so (addr & 2) would be a good heuristic
+  to use when checking for thumb (see arm_pc_is_thumb() below).
+  Unfortunately, something else depends on these (incorrect) macros, so
+  fixing them actually breaks gdb.  I didn't have time to investigate. Z.R.
+*/
+/* Thumb function addresses are odd (bit 0 is set).  Here are some
+   macros to test, set, or clear bit 0 of addresses.  */
+#define IS_THUMB_ADDR(addr)	((addr) & 1)
+#define MAKE_THUMB_ADDR(addr)	((addr) | 1)
+#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
+
+/* Macros to round N up or down to the next A boundary; A must be
+   a power of two. */
+#define ROUND_DOWN(n,a) 	((n) & ~((a) - 1))
+#define ROUND_UP(n,a) 		(((n) + (a) - 1) & ~((a) - 1))
+  
+/* Should call_function allocate stack space for a struct return?  */
+/* The system C compiler uses a similar structure return convention to gcc */
+int
+arm_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 4);
+}
+
+int
+arm_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;
+{
+#define LOWEST_PC 0x20  /* the first 0x20 bytes are the trap vectors. */
+  return (chain != 0 && (FRAME_SAVED_PC (thisframe) >= LOWEST_PC));
+}
+
+/* Set to true if the 32-bit mode is in use. */
+
+int arm_apcs_32 = 1;
+
+/* Flag set by arm_fix_call_dummy that tells whether the target function
+   is a Thumb function.  This flag is checked by arm_push_arguments.
+   FIXME: Change the PUSH_ARGUMENTS macro (and its use in valops.c) to
+   pass the function address as an additional parameter.  */
+
+static int target_is_thumb;
+
+/* Flag set by arm_fix_call_dummy that tells whether the calling function
+   is a Thumb function.  This flag is checked by arm_pc_is_thumb
+   and arm_call_dummy_breakpoint_offset.  */
+
+static int caller_is_thumb;
+
+/* Tell if the program counter value in MEMADDR is in a Thumb function.  */
+
+int
+arm_pc_is_thumb (memaddr)
+     bfd_vma memaddr;
+{
+  struct minimal_symbol * sym;
+  CORE_ADDR sp;
+
+  /* If bit 0 of the address is set, assume this is a Thumb address. */
+  if (IS_THUMB_ADDR (memaddr))
+    return 1;
+
+  /* Thumb function have a "special" bit set in minimal symbols */
+  sym = lookup_minimal_symbol_by_pc (memaddr);
+  if (sym)
+    {
+      return (MSYMBOL_IS_SPECIAL(sym));
+    }
+  else
+    return 0;
+}
+
+/* Tell if the program counter value in MEMADDR is in a call dummy that
+   is being called from a Thumb function.  */
+
+int
+arm_pc_is_thumb_dummy (memaddr)
+     bfd_vma memaddr;
+{
+  CORE_ADDR sp = read_sp();
+
+  if (PC_IN_CALL_DUMMY (memaddr, sp, sp+64))
+    return caller_is_thumb;
+  else
+    return 0;
+}
+
+CORE_ADDR
+arm_addr_bits_remove (val)
+     CORE_ADDR val;
+{
+  if (arm_pc_is_thumb (val))
+    return (val & (arm_apcs_32 ? 0xfffffffe : 0x03fffffe));
+  else
+    return (val & (arm_apcs_32 ? 0xfffffffc : 0x03fffffc));
+}
+
+CORE_ADDR
+arm_saved_pc_after_call (frame)
+     struct frame_info *frame;
+{
+  return ADDR_BITS_REMOVE (read_register (LR_REGNUM));
+}
+
+/* A typical Thumb prologue looks like this:
+        push    {r7, lr}
+        add     sp, sp, #-28
+        add     r7, sp, #12
+   Sometimes the latter instruction may be replaced by:
+        mov     r7, sp 
+*/
+
+static CORE_ADDR
+thumb_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR current_pc;
+
+  for (current_pc = pc; current_pc < pc + 20; current_pc += 2)
+    {
+      unsigned short insn = read_memory_unsigned_integer (current_pc, 2);
+
+      if (   (insn & 0xfe00) != 0xb400		/* push {..., r7, lr} */
+	  && (insn & 0xff00) != 0xb000		/* add sp, #simm */
+	  && (insn & 0xff00) != 0xaf00		/* add r7, sp, #imm */
+	  && insn != 0x466f			/* mov r7, sp */
+	  && (insn & 0xffc0) != 0x4640)		/* mov r0-r7, r8-r15 */
+	break;
+    }
+
+  return current_pc;
+}
+
+/* APCS (ARM procedure call standard) defines the following prologue:
+
+   mov		ip, sp
+  [stmfd	sp!, {a1,a2,a3,a4}]
+   stmfd	sp!, {...,fp,ip,lr,pc}
+  [stfe		f7, [sp, #-12]!]
+  [stfe		f6, [sp, #-12]!]
+  [stfe		f5, [sp, #-12]!]
+  [stfe		f4, [sp, #-12]!]
+   sub		fp, ip, #nn	// nn == 20 or 4 depending on second ins
+*/
+
+CORE_ADDR
+arm_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  unsigned long inst;
+  CORE_ADDR skip_pc;
+  CORE_ADDR func_addr, func_end;
+  struct symtab_and_line sal;
+
+  /* See what the symbol table says. */
+  if (find_pc_partial_function (pc, NULL, & func_addr, & func_end))
+    {
+      sal = find_pc_line (func_addr, 0);
+      if (sal.line != 0 && sal.end < func_end)
+	return sal.end;
+    }
+
+  /* Check if this is Thumb code.  */
+  if (arm_pc_is_thumb (pc))
+    return thumb_skip_prologue (pc);
+
+  /* Can't find the prologue end in the symbol table, try it the hard way
+     by disassembling the instructions. */
+  skip_pc = pc;
+  inst = read_memory_integer (skip_pc, 4);
+  if (inst != 0xe1a0c00d)  /* mov ip, sp */
+    return pc;
+
+  skip_pc += 4;
+  inst = read_memory_integer (skip_pc, 4);
+  if ((inst & 0xfffffff0) == 0xe92d0000)  /* stmfd sp!,{a1,a2,a3,a4}  */
+    {
+      skip_pc += 4;
+      inst = read_memory_integer (skip_pc, 4);
+    }
+
+  if ((inst & 0xfffff800) != 0xe92dd800)  /* stmfd sp!,{...,fp,ip,lr,pc} */
+    return pc;
+
+  skip_pc += 4;
+  inst = read_memory_integer (skip_pc, 4);
+
+  /* Any insns after this point may float into the code, if it makes
+     for better instruction scheduling, so we skip them only if
+     we find them, but still consdier the function to be frame-ful  */
+
+  /* We may have either one sfmfd instruction here, or several stfe insns,
+     depending on the version of floating point code we support.  */
+  if ((inst & 0xffbf0fff) == 0xec2d0200)  /* sfmfd fn, <cnt>, [sp]! */
+    {
+      skip_pc += 4;
+      inst = read_memory_integer (skip_pc, 4);
+    }
+  else
+    {
+      while ((inst & 0xffff8fff) == 0xed6d0103) /* stfe fn, [sp, #-12]! */
+        {
+          skip_pc += 4;
+          inst = read_memory_integer (skip_pc, 4);
+        }
+    }
+
+  if ((inst & 0xfffff000) == 0xe24cb000) /* sub fp, ip, #nn */
+    skip_pc += 4;
+
+  return skip_pc;
+}
+
+
+
+/* Function: thumb_scan_prologue (helper function for arm_scan_prologue)
+   This function decodes a Thumb function prologue to determine:
+     1) the size of the stack frame
+     2) which registers are saved on it
+     3) the offsets of saved regs
+     4) the offset from the stack pointer to the frame pointer
+   This information is stored in the "extra" fields of the frame_info.
+
+   A typical Thumb function prologue might look like this:
+	push {r7, lr}
+	sub  sp, #28,
+	add  r7, sp, #12
+   Which would create this stack frame (offsets relative to FP)
+     old SP ->	24  stack parameters
+		20  LR
+		16  R7
+     R7 ->       0  local variables (16 bytes)
+     SP ->     -12  additional stack space (12 bytes)
+   The frame size would thus be 36 bytes, and the frame offset would be
+   12 bytes.  The frame register is R7.  */
+	
+static void
+thumb_scan_prologue (fi)
+     struct frame_info * fi;
+{
+  CORE_ADDR prologue_start;
+  CORE_ADDR prologue_end;
+  CORE_ADDR current_pc;
+  int       saved_reg[16];	/* which register has been copied to register n? */
+  int       i;
+
+  if (find_pc_partial_function (fi->pc, NULL, & prologue_start, & prologue_end))
+    {
+      struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+      if (sal.line == 0)		/* no line info, use current PC */
+	prologue_end = fi->pc;
+      else if (sal.end < prologue_end)	/* next line begins after fn end */
+	prologue_end = sal.end;		/* (probably means no prologue)  */
+    }
+  else
+    prologue_end = prologue_start + 40; /* We're in the boondocks: allow for */
+					/* 16 pushes, an add, and "mv fp,sp" */
+
+  prologue_end = min (prologue_end, fi->pc);
+
+  /* Initialize the saved register map.  When register H is copied to
+     register L, we will put H in saved_reg[L].  */
+  for (i = 0; i < 16; i++)
+    saved_reg[i] = i;
+
+  /* Search the prologue looking for instructions that set up the
+     frame pointer, adjust the stack pointer, and save registers.  */
+
+  fi->framesize = 0;
+  for (current_pc = prologue_start; current_pc < prologue_end; current_pc += 2)
+    {
+      unsigned short insn;
+      int regno;
+      int offset;
+
+      insn = read_memory_unsigned_integer (current_pc, 2);
+
+      if ((insn & 0xfe00) == 0xb400)		/* push { rlist } */
+	{
+	  /* Bits 0-7 contain a mask for registers R0-R7.  Bit 8 says
+	     whether to save LR (R14).  */
+	  int mask = (insn & 0xff) | ((insn & 0x100) << 6);
+
+	  /* Calculate offsets of saved R0-R7 and LR. */
+	  for (regno = LR_REGNUM; regno >= 0; regno--)
+	    if (mask & (1 << regno))
+ 	      {
+		fi->framesize += 4;
+		fi->fsr.regs[saved_reg[regno]] = -(fi->framesize);
+		saved_reg[regno] = regno;	/* reset saved register map */
+	      }
+	}
+      else if ((insn & 0xff00) == 0xb000)	/* add sp, #simm */
+	{
+	  offset = (insn & 0x7f) << 2;		/* get scaled offset */
+	  if (insn & 0x80)			/* is it signed? */
+	     offset = -offset;
+	  fi->framesize -= offset;
+	}
+      else if ((insn & 0xff00) == 0xaf00)	/* add r7, sp, #imm */
+	{
+	  fi->framereg = THUMB_FP_REGNUM;
+	  fi->frameoffset = (insn & 0xff) << 2;	/* get scaled offset */
+	}
+      else if (insn == 0x466f)			/* mov r7, sp */
+	{
+	  fi->framereg = THUMB_FP_REGNUM;
+	  fi->frameoffset = 0;
+	  saved_reg[THUMB_FP_REGNUM] = SP_REGNUM;
+	}
+      else if ((insn & 0xffc0) == 0x4640)	/* mov r0-r7, r8-r15 */
+	{
+	  int lo_reg = insn & 7;		/* dest. register (r0-r7) */
+	  int hi_reg = ((insn >> 3) & 7) + 8;	/* source register (r8-15) */
+	  saved_reg[lo_reg] = hi_reg;		/* remember hi reg was saved */
+	}
+      else
+	break;				/* anything else isn't prologue */
+    }
+}
+
+/* Function: check_prologue_cache
+   Check if prologue for this frame's PC has already been scanned.
+   If it has, copy the relevant information about that prologue and
+   return non-zero.  Otherwise do not copy anything and return zero.
+
+   The information saved in the cache includes:
+     * the frame register number;
+     * the size of the stack frame;
+     * the offsets of saved regs (relative to the old SP); and
+     * the offset from the stack pointer to the frame pointer
+
+   The cache contains only one entry, since this is adequate
+   for the typical sequence of prologue scan requests we get.
+   When performing a backtrace, GDB will usually ask to scan
+   the same function twice in a row (once to get the frame chain,
+   and once to fill in the extra frame information).
+*/
+
+static struct frame_info prologue_cache;
+
+static int
+check_prologue_cache (fi)
+     struct frame_info * fi;
+{
+  int i;
+
+  if (fi->pc == prologue_cache.pc)
+    {
+      fi->framereg = prologue_cache.framereg;
+      fi->framesize = prologue_cache.framesize;
+      fi->frameoffset = prologue_cache.frameoffset;
+      for (i = 0; i <= NUM_REGS; i++)
+	fi->fsr.regs[i] = prologue_cache.fsr.regs[i];
+      return 1;
+    }
+  else
+    return 0;
+}
+
+
+/* Function: save_prologue_cache
+   Copy the prologue information from fi to the prologue cache.
+*/
+
+static void
+save_prologue_cache (fi)
+     struct frame_info * fi;
+{
+  int i;
+
+  prologue_cache.pc          = fi->pc;
+  prologue_cache.framereg    = fi->framereg;
+  prologue_cache.framesize   = fi->framesize;
+  prologue_cache.frameoffset = fi->frameoffset;
+  
+  for (i = 0; i <= NUM_REGS; i++)
+    prologue_cache.fsr.regs[i] = fi->fsr.regs[i];
+}
+
+
+/* Function: arm_scan_prologue
+   This function decodes an ARM function prologue to determine:
+     1) the size of the stack frame
+     2) which registers are saved on it
+     3) the offsets of saved regs
+     4) the offset from the stack pointer to the frame pointer
+   This information is stored in the "extra" fields of the frame_info.
+
+   A typical Arm function prologue might look like this:
+	mov    ip, sp
+	stmfd  sp!, {fp, ip, lr, pc}
+	sub    fp, ip, #4
+	sub    sp, sp, #16
+   Which would create this stack frame (offsets relative to FP):
+     IP ->   4	(caller's stack)
+     FP ->   0	PC (points to address of stmfd instruction + 12 in callee)
+	    -4	LR (return address in caller)
+	    -8	IP (copy of caller's SP)
+     	   -12	FP (caller's FP)
+     SP -> -28	Local variables
+   The frame size would thus be 32 bytes, and the frame offset would be
+   28 bytes.  */
+
+static void
+arm_scan_prologue (fi)
+     struct frame_info * fi;
+{
+  int regno, sp_offset, fp_offset;
+  CORE_ADDR prologue_start, prologue_end, current_pc;
+
+  /* Check if this function is already in the cache of frame information. */
+  if (check_prologue_cache (fi))
+    return;
+
+  /* Assume there is no frame until proven otherwise.  */
+  fi->framereg    = SP_REGNUM;
+  fi->framesize   = 0;
+  fi->frameoffset = 0;
+
+  /* Check for Thumb prologue.  */
+  if (arm_pc_is_thumb (fi->pc))
+    {
+      thumb_scan_prologue (fi);
+      save_prologue_cache (fi);
+      return;
+    }
+
+  /* Find the function prologue.  If we can't find the function in
+     the symbol table, peek in the stack frame to find the PC.  */
+  if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end))
+    {
+      /* Assume the prologue is everything between the first instruction
+         in the function and the first source line.  */
+      struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+      if (sal.line == 0)		/* no line info, use current PC */
+	prologue_end = fi->pc;
+      else if (sal.end < prologue_end)	/* next line begins after fn end */
+	prologue_end = sal.end;		/* (probably means no prologue)  */
+    }
+  else
+    {
+      /* Get address of the stmfd in the prologue of the callee; the saved
+         PC is the address of the stmfd + 12.  */
+      prologue_start = (read_memory_integer (fi->frame, 4) & 0x03fffffc) - 12;
+      prologue_end = prologue_start + 40; /* FIXME: should be big enough */
+    }
+
+  /* Now search the prologue looking for instructions that set up the
+     frame pointer, adjust the stack pointer, and save registers.  */
+
+  sp_offset = fp_offset = 0;
+  for (current_pc = prologue_start; current_pc < prologue_end; current_pc += 4)
+    {
+      unsigned int insn = read_memory_unsigned_integer (current_pc, 4);
+
+      if ((insn & 0xffff0000) == 0xe92d0000)	/* stmfd sp!, {..., r7, lr} */
+	{
+	  int mask = insn & 0xffff;
+
+	  /* Calculate offsets of saved registers. */
+	  for (regno = PC_REGNUM; regno >= 0; regno--)
+	    if (mask & (1 << regno))
+	      {
+		sp_offset -= 4;
+		fi->fsr.regs[regno] = sp_offset;
+	      }
+	}
+      else if ((insn & 0xfffff000) == 0xe24cb000)	/* sub fp, ip #n */
+	{
+	  unsigned imm = insn & 0xff;			/* immediate value */
+	  unsigned rot = (insn & 0xf00) >> 7;		/* rotate amount */
+	  imm = (imm >> rot) | (imm << (32-rot));
+	  fp_offset = -imm;
+	  fi->framereg = FP_REGNUM;
+	}
+      else if ((insn & 0xfffff000) == 0xe24dd000)	/* sub sp, sp #n */
+	{
+	  unsigned imm = insn & 0xff;			/* immediate value */
+	  unsigned rot = (insn & 0xf00) >> 7;		/* rotate amount */
+	  imm = (imm >> rot) | (imm << (32-rot));
+	  sp_offset -= imm;
+	}
+      else if ((insn & 0xffff7fff) == 0xed6d0103) /* stfe f?, [sp, -#c]! */
+	{
+	  sp_offset -= 12;
+	  regno = F0_REGNUM + ((insn >> 12) & 0x07);
+	  fi->fsr.regs[regno] = sp_offset;
+	}
+      else if (insn == 0xe1a0c00d)			/* mov ip, sp */
+	continue;
+      else
+	break;	/* not a recognized prologue instruction */
+    }
+
+  /* The frame size is just the negative of the offset (from the original SP)
+     of the last thing thing we pushed on the stack.  The frame offset is
+     [new FP] - [new SP].  */
+  fi->framesize = -sp_offset;
+  fi->frameoffset = fp_offset - sp_offset;
+  
+  save_prologue_cache (fi);
+}
+
+
+/* Function: find_callers_reg
+   Find REGNUM on the stack.  Otherwise, it's in an active register.  One thing
+   we might want to do here is to check REGNUM against the clobber mask, and
+   somehow flag it as invalid if it isn't saved on the stack somewhere.  This
+   would provide a graceful failure mode when trying to get the value of
+   caller-saves registers for an inner frame.  */
+
+static CORE_ADDR
+arm_find_callers_reg (fi, regnum)
+     struct frame_info * fi;
+     int regnum;
+{
+  for (; fi; fi = fi->next)
+    
+#if 0	/* FIXME: enable this code if we convert to new call dummy scheme.  */
+    if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+    else
+#endif
+      if (fi->fsr.regs[regnum] != 0)
+	return read_memory_integer (fi->fsr.regs[regnum], 
+				  REGISTER_RAW_SIZE(regnum));
+  return read_register (regnum);
+}
+
+
+/* Function: frame_chain
+   Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+   For ARM, we save the frame size when we initialize the frame_info.
+
+   The original definition of this function was a macro in tm-arm.h:
+      { In the case of the ARM, the frame's nominal address is the FP value,
+	 and 12 bytes before comes the saved previous FP value as a 4-byte word.  }
+
+      #define FRAME_CHAIN(thisframe)  \
+	((thisframe)->pc >= LOWEST_PC ?    \
+	 read_memory_integer ((thisframe)->frame - 12, 4) :\
+	 0)
+*/
+
+CORE_ADDR
+arm_frame_chain (fi)
+     struct frame_info * fi;
+{
+#if 0	/* FIXME: enable this code if we convert to new call dummy scheme.  */
+  CORE_ADDR fn_start, callers_pc, fp;
+
+  /* is this a dummy frame? */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    return fi->frame;	/* dummy frame same as caller's frame */
+
+  /* is caller-of-this a dummy frame? */
+  callers_pc = FRAME_SAVED_PC(fi);  /* find out who called us: */
+  fp = arm_find_callers_reg (fi, FP_REGNUM);
+  if (PC_IN_CALL_DUMMY (callers_pc, fp, fp))	
+    return fp;		/* dummy frame's frame may bear no relation to ours */
+
+  if (find_pc_partial_function (fi->pc, 0, &fn_start, 0))
+    if (fn_start == entry_point_address ())
+      return 0;		/* in _start fn, don't chain further */
+#endif
+  CORE_ADDR caller_pc, fn_start;
+  struct frame_info caller_fi;
+  int framereg = fi->framereg;
+
+  if (fi->pc < LOWEST_PC)
+    return 0;
+
+  /* If the caller is the startup code, we're at the end of the chain.  */
+  caller_pc = FRAME_SAVED_PC (fi);
+  if (find_pc_partial_function (caller_pc, 0, &fn_start, 0))
+    if (fn_start == entry_point_address ())
+      return 0;
+
+  /* If the caller is Thumb and the caller is ARM, or vice versa,
+     the frame register of the caller is different from ours.
+     So we must scan the prologue of the caller to determine its
+     frame register number. */
+  if (arm_pc_is_thumb (caller_pc) != arm_pc_is_thumb (fi->pc))
+    {
+      memset (& caller_fi, 0, sizeof (caller_fi));
+      caller_fi.pc = caller_pc;
+      arm_scan_prologue (& caller_fi);
+      framereg = caller_fi.framereg;
+    }
+
+  /* If the caller used a frame register, return its value.
+     Otherwise, return the caller's stack pointer.  */
+  if (framereg == FP_REGNUM || framereg == THUMB_FP_REGNUM)
+    return arm_find_callers_reg (fi, framereg);
+  else
+    return fi->frame + fi->framesize;
+}
+
+/* Function: init_extra_frame_info
+   This function actually figures out the frame address for a given pc and
+   sp.  This is tricky  because we sometimes don't use an explicit
+   frame pointer, and the previous stack pointer isn't necessarily recorded
+   on the stack.  The only reliable way to get this info is to
+   examine the prologue.  */
+
+void
+arm_init_extra_frame_info (fi)
+     struct frame_info * fi;
+{
+  int reg;
+
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+
+#if 0	/* FIXME: enable this code if we convert to new call dummy scheme.  */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    {
+      /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+	 by assuming it's always FP.  */
+      fi->frame       = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
+      fi->framesize   = 0;
+      fi->frameoffset = 0;
+      return;
+    }
+  else 
+#endif
+    {
+      arm_scan_prologue (fi);
+
+      if (!fi->next)			/* this is the innermost frame? */
+	fi->frame = read_register (fi->framereg);
+      else			 	/* not the innermost frame */
+	/* If we have an FP,  the callee saved it. */
+	if (fi->framereg == FP_REGNUM || fi->framereg == THUMB_FP_REGNUM)
+	  if (fi->next->fsr.regs[fi->framereg] != 0)
+	    fi->frame = read_memory_integer (fi->next->fsr.regs[fi->framereg],
+					     4);
+
+      /* Calculate actual addresses of saved registers using offsets determined
+         by arm_scan_prologue.  */
+      for (reg = 0; reg < NUM_REGS; reg++)
+	if (fi->fsr.regs[reg] != 0)
+	  fi->fsr.regs[reg] += fi->frame + fi->framesize - fi->frameoffset;
+    }
+}
+
+
+/* Function: frame_saved_pc
+   Find the caller of this frame.  We do this by seeing if LR_REGNUM is saved
+   in the stack anywhere, otherwise we get it from the registers.
+
+   The old definition of this function was a macro:
+     #define FRAME_SAVED_PC(FRAME) \
+	ADDR_BITS_REMOVE (read_memory_integer ((FRAME)->frame - 4, 4))
+*/
+
+CORE_ADDR
+arm_frame_saved_pc (fi)
+     struct frame_info * fi;
+{
+#if 0	/* FIXME: enable this code if we convert to new call dummy scheme.  */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
+  else
+#endif
+    {
+      CORE_ADDR pc = arm_find_callers_reg (fi, LR_REGNUM);
+      return IS_THUMB_ADDR (pc) ? UNMAKE_THUMB_ADDR (pc) : pc;
+    }
+}
+
+
+/* Return the frame address.  On ARM, it is R11; on Thumb it is R7.
+   Examine the Program Status Register to decide which state we're in.  */
+
+CORE_ADDR
+arm_target_read_fp ()
+{
+  if (read_register (PS_REGNUM) & 0x20)		/* Bit 5 is Thumb state bit */
+    return read_register (THUMB_FP_REGNUM);	/* R7 if Thumb */
+  else
+    return read_register (FP_REGNUM);		/* R11 if ARM */
+}
+
+
+/* Calculate the frame offsets of the saved registers (ARM version). */
+void
+arm_frame_find_saved_regs (fi, regaddr)
+     struct frame_info *fi;
+     struct frame_saved_regs *regaddr;
+{
+  memcpy (regaddr, &fi->fsr, sizeof (struct frame_saved_regs));
+}
+
+
+void
+arm_push_dummy_frame ()
+{
+  CORE_ADDR old_sp = read_register (SP_REGNUM);
+  CORE_ADDR sp = old_sp;
+  CORE_ADDR fp, prologue_start;
+  int regnum;
+
+  /* Push the two dummy prologue instructions in reverse order,
+     so that they'll be in the correct low-to-high order in memory.  */
+  /* sub     fp, ip, #4 */
+  sp = push_word (sp, 0xe24cb004);
+  /*  stmdb   sp!, {r0-r10, fp, ip, lr, pc} */
+  prologue_start = sp = push_word (sp, 0xe92ddfff);
+
+  /* push a pointer to the dummy prologue + 12, because when
+     stm instruction stores the PC, it stores the address of the stm
+     instruction itself plus 12.  */
+  fp = sp = push_word (sp, prologue_start + 12);
+  sp = push_word (sp, read_register (PC_REGNUM)); /* FIXME: was PS_REGNUM */
+  sp = push_word (sp, old_sp);
+  sp = push_word (sp, read_register (FP_REGNUM));
+  
+  for (regnum = 10; regnum >= 0; regnum --)
+    sp = push_word (sp, read_register (regnum));
+  
+  write_register (FP_REGNUM, fp);
+  write_register (THUMB_FP_REGNUM, fp);
+  write_register (SP_REGNUM, sp);
+}
+
+/* Fix up the call dummy, based on whether the processor is currently
+   in Thumb or ARM mode, and whether the target function is Thumb
+   or ARM.  There are three different situations requiring three
+   different dummies:
+
+   * ARM calling ARM: uses the call dummy in tm-arm.h, which has already
+     been copied into the dummy parameter to this function.
+   * ARM calling Thumb: uses the call dummy in tm-arm.h, but with the
+     "mov pc,r4" instruction patched to be a "bx r4" instead.
+   * Thumb calling anything: uses the Thumb dummy defined below, which
+     works for calling both ARM and Thumb functions.
+
+   All three call dummies expect to receive the target function address
+   in R4, with the low bit set if it's a Thumb function.
+*/
+
+void
+arm_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
+     char *        dummy;
+     CORE_ADDR     pc;
+     CORE_ADDR     fun;
+     int           nargs;
+     value_ptr *   args;
+     struct type * type;
+     int           gcc_p;
+{
+  static short thumb_dummy[4] =
+  {
+    0xf000, 0xf801,	/*	  bl      label */
+    0xdf18,		/*	  swi     24 */
+    0x4720,		/* label: bx	  r4 */
+  };
+  static unsigned long arm_bx_r4 = 0xe12fff14;	/* bx r4 instruction */
+
+  /* Set flag indicating whether the current PC is in a Thumb function. */
+  caller_is_thumb = arm_pc_is_thumb (read_pc());
+
+  /* If the target function is Thumb, set the low bit of the function address.
+     And if the CPU is currently in ARM mode, patch the second instruction
+     of call dummy to use a BX instruction to switch to Thumb mode.  */
+  target_is_thumb = arm_pc_is_thumb (fun);
+  if (target_is_thumb)
+    {
+      fun |= 1;
+      if (!caller_is_thumb)
+	store_unsigned_integer (dummy + 4, sizeof (arm_bx_r4), arm_bx_r4);
+    }
+
+  /* If the CPU is currently in Thumb mode, use the Thumb call dummy
+     instead of the ARM one that's already been copied.  This will
+     work for both Thumb and ARM target functions.  */
+  if (caller_is_thumb)
+    {
+      int i;
+      char *p = dummy;
+      int len = sizeof (thumb_dummy) / sizeof (thumb_dummy[0]);
+
+      for (i = 0; i < len; i++)
+	{
+	  store_unsigned_integer (p, sizeof (thumb_dummy[0]), thumb_dummy[i]);
+	  p += sizeof (thumb_dummy[0]);
+	}
+    }
+
+  /* Put the target address in r4; the call dummy will copy this to the PC. */
+  write_register (4, fun);
+}
+
+
+/* Return the offset in the call dummy of the instruction that needs
+   to have a breakpoint placed on it.  This is the offset of the 'swi 24'
+   instruction, which is no longer actually used, but simply acts
+   as a place-holder now.
+
+   This implements the CALL_DUMMY_BREAK_OFFSET macro.
+*/
+
+int
+arm_call_dummy_breakpoint_offset ()
+{
+  if (caller_is_thumb)
+    return 4;
+  else
+    return 8;
+}
+
+
+CORE_ADDR
+arm_push_arguments(nargs, args, sp, struct_return, struct_addr)
+     int         nargs;
+     value_ptr * args;
+     CORE_ADDR   sp;
+     int         struct_return;
+     CORE_ADDR   struct_addr;
+{
+  int argreg;
+  int float_argreg;
+  int argnum;
+  int stack_offset;
+  struct stack_arg {
+      char *val;
+      int len;
+      int offset;
+    };
+  struct stack_arg *stack_args =
+      (struct stack_arg*)alloca (nargs * sizeof (struct stack_arg));
+  int nstack_args = 0;
+
+
+  /* Initialize the integer and float register pointers.  */
+  argreg = A1_REGNUM;
+  float_argreg = F0_REGNUM;
+
+  /* the struct_return pointer occupies the first parameter-passing reg */
+  if (struct_return)
+      write_register (argreg++, struct_addr);
+
+  /* The offset onto the stack at which we will start copying parameters
+     (after the registers are used up) begins at 16 in the old ABI.
+     This leaves room for the "home" area for register parameters.  */
+  stack_offset = REGISTER_SIZE * 4;
+
+  /* Process args from left to right.  Store as many as allowed in
+	registers, save the rest to be pushed on the stack */
+  for(argnum = 0; argnum < nargs; argnum++)
+    {
+      char *         val;
+      value_ptr      arg = args[argnum];
+      struct type *  arg_type = check_typedef (VALUE_TYPE (arg));
+      struct type *  target_type = TYPE_TARGET_TYPE (arg_type);
+      int            len = TYPE_LENGTH (arg_type);
+      enum type_code typecode = TYPE_CODE (arg_type);
+      CORE_ADDR      regval;
+      int newarg;
+
+      val = (char *) VALUE_CONTENTS (arg);
+
+      /* If the argument is a pointer to a function, and it's a Thumb
+         function, set the low bit of the pointer.  */
+      if (typecode == TYPE_CODE_PTR
+	  && target_type != NULL
+	  && TYPE_CODE (target_type) == TYPE_CODE_FUNC)
+	{
+	  regval = extract_address (val, len);
+	  if (arm_pc_is_thumb (regval))
+	    store_address (val, len, MAKE_THUMB_ADDR (regval));
+	}
+
+#define MAPCS_FLOAT 0	/* --mapcs-float not implemented by the compiler yet */
+#if MAPCS_FLOAT
+      /* Up to four floating point arguments can be passed in floating
+         point registers on ARM (not on Thumb).  */
+      if (typecode == TYPE_CODE_FLT
+	  && float_argreg <= ARM_LAST_FP_ARG_REGNUM
+	  && !target_is_thumb)
+	{
+	  /* This is a floating point value that fits entirely
+	     in a single register.  */
+	  regval = extract_address (val, len);
+	  write_register (float_argreg++, regval);
+	}
+      else
+#endif
+	{
+	  /* Copy the argument to general registers or the stack in
+	     register-sized pieces.  Large arguments are split between
+	     registers and stack.  */
+	  while (len > 0)
+	    {
+	      if (argreg <= ARM_LAST_ARG_REGNUM)
+		{
+	          int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
+		  regval = extract_address (val, partial_len);
+
+		  /* It's a simple argument being passed in a general
+		     register.  */
+		  write_register (argreg, regval);
+		  argreg++;
+	          len -= partial_len;
+	          val += partial_len;
+		}
+	      else
+		{
+		  /* keep for later pushing */
+		  stack_args[nstack_args].val = val;
+		  stack_args[nstack_args++].len = len;
+		  break;
+		}
+	    }
+	}
+    }
+    /* now do the real stack pushing, process args right to left */
+    while(nstack_args--)
+      {
+	sp -= stack_args[nstack_args].len;
+	write_memory(sp, stack_args[nstack_args].val,
+		stack_args[nstack_args].len);
+      }
+
+  /* Return adjusted stack pointer.  */
+  return sp;
+}
+
+void
+arm_pop_frame ()
+{
+  struct frame_info *frame = get_current_frame();
+  int regnum;
+
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    if (frame->fsr.regs[regnum] != 0)
+      write_register (regnum, 
+		      read_memory_integer (frame->fsr.regs[regnum], 4));
+
+  write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+  write_register (SP_REGNUM, read_register (frame->framereg));
+
+  flush_cached_frames ();
+}
+
+static void
+print_fpu_flags (flags)
+     int flags;
+{
+    if (flags & (1 << 0)) fputs ("IVO ", stdout);
+    if (flags & (1 << 1)) fputs ("DVZ ", stdout);
+    if (flags & (1 << 2)) fputs ("OFL ", stdout);
+    if (flags & (1 << 3)) fputs ("UFL ", stdout);
+    if (flags & (1 << 4)) fputs ("INX ", stdout);
+    putchar ('\n');
+}
+
+void
+arm_float_info ()
+{
+    register unsigned long status = read_register (FPS_REGNUM);
+    int type;
+
+    type = (status >> 24) & 127;
+    printf ("%s FPU type %d\n",
+	    (status & (1<<31)) ? "Hardware" : "Software",
+	    type);
+    fputs ("mask: ", stdout);
+    print_fpu_flags (status >> 16);
+    fputs ("flags: ", stdout);
+    print_fpu_flags (status);
+}
+
+static char *original_register_names[] =
+{ "a1", "a2", "a3", "a4", /*  0  1  2  3 */
+  "v1", "v2", "v3", "v4", /*  4  5  6  7 */
+  "v5", "v6", "sl", "fp", /*  8  9 10 11 */
+  "ip", "sp", "lr", "pc", /* 12 13 14 15 */
+  "f0", "f1", "f2", "f3", /* 16 17 18 19 */
+  "f4", "f5", "f6", "f7", /* 20 21 22 23 */
+  "fps","ps" }            /* 24 25       */;
+
+/* These names are the ones which gcc emits, and 
+   I find them less confusing.  Toggle between them
+   using the `othernames' command. */
+static char *additional_register_names[] =
+{ "r0", "r1", "r2", "r3", /*  0  1  2  3 */
+  "r4", "r5", "r6", "r7", /*  4  5  6  7 */
+  "r8", "r9", "sl", "fp", /*  8  9 10 11 */
+  "ip", "sp", "lr", "pc", /* 12 13 14 15 */
+  "f0", "f1", "f2", "f3", /* 16 17 18 19 */
+  "f4", "f5", "f6", "f7", /* 20 21 22 23 */
+  "fps","ps" }            /* 24 25       */;
+
+char **arm_register_names = original_register_names;
+
+
+static void
+arm_othernames ()
+{
+  static int toggle;
+  arm_register_names = (toggle
+			? additional_register_names
+			: original_register_names);
+  toggle = !toggle;
+}
+
+/* FIXME:  Fill in with the 'right thing', see asm 
+   template in arm-convert.s */
+
+void 
+convert_from_extended (ptr, dbl)
+     void * ptr;
+     double * dbl;
+{
+  *dbl = *(double*)ptr;
+}
+
+void 
+convert_to_extended (dbl, ptr)
+     void * ptr;
+     double * dbl;
+{
+  *(double*)ptr = *dbl;
+}
+
+static int
+condition_true (cond, status_reg)
+     unsigned long cond;
+     unsigned long status_reg;
+{
+  if (cond == INST_AL || cond == INST_NV)
+    return 1;
+
+  switch (cond)
+    {
+    case INST_EQ:
+      return ((status_reg & FLAG_Z) != 0);
+    case INST_NE:
+      return ((status_reg & FLAG_Z) == 0);
+    case INST_CS:
+      return ((status_reg & FLAG_C) != 0);
+    case INST_CC:
+      return ((status_reg & FLAG_C) == 0);
+    case INST_MI:
+      return ((status_reg & FLAG_N) != 0);
+    case INST_PL:
+      return ((status_reg & FLAG_N) == 0);
+    case INST_VS:
+      return ((status_reg & FLAG_V) != 0);
+    case INST_VC:
+      return ((status_reg & FLAG_V) == 0);
+    case INST_HI:
+      return ((status_reg & (FLAG_C | FLAG_Z)) == FLAG_C);
+    case INST_LS:
+      return ((status_reg & (FLAG_C | FLAG_Z)) != FLAG_C);
+    case INST_GE:
+      return (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0));
+    case INST_LT:
+      return (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0));
+    case INST_GT:
+      return (((status_reg & FLAG_Z) == 0) &&
+	      (((status_reg & FLAG_N) == 0) == ((status_reg & FLAG_V) == 0)));
+    case INST_LE:
+      return (((status_reg & FLAG_Z) != 0) ||
+	      (((status_reg & FLAG_N) == 0) != ((status_reg & FLAG_V) == 0)));
+    }
+  return 1;
+}
+
+#define submask(x) ((1L << ((x) + 1)) - 1)
+#define bit(obj,st) (((obj) >> (st)) & 1)
+#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
+#define sbits(obj,st,fn) \
+  ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
+#define BranchDest(addr,instr) \
+  ((CORE_ADDR) (((long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
+#define ARM_PC_32 1
+
+static unsigned long
+shifted_reg_val (inst, carry, pc_val, status_reg)
+     unsigned long inst;
+     int carry;
+     unsigned long pc_val;
+     unsigned long status_reg;
+{
+  unsigned long res, shift;
+  int rm = bits (inst, 0, 3);
+  unsigned long shifttype = bits (inst, 5, 6);
+ 
+  if (bit(inst, 4))
+    {
+      int rs = bits (inst, 8, 11);
+      shift = (rs == 15 ? pc_val + 8 : read_register (rs)) & 0xFF;
+    }
+  else
+    shift = bits (inst, 7, 11);
+ 
+  res = (rm == 15 
+	 ? ((pc_val | (ARM_PC_32 ? 0 : status_reg))
+	    + (bit (inst, 4) ? 12 : 8)) 
+	 : read_register (rm));
+
+  switch (shifttype)
+    {
+    case 0: /* LSL */
+      res = shift >= 32 ? 0 : res << shift;
+      break;
+      
+    case 1: /* LSR */
+      res = shift >= 32 ? 0 : res >> shift;
+      break;
+
+    case 2: /* ASR */
+      if (shift >= 32) shift = 31;
+      res = ((res & 0x80000000L)
+	     ? ~((~res) >> shift) : res >> shift);
+      break;
+
+    case 3: /* ROR/RRX */
+      shift &= 31;
+      if (shift == 0)
+	res = (res >> 1) | (carry ? 0x80000000L : 0);
+      else
+	res = (res >> shift) | (res << (32-shift));
+      break;
+    }
+
+  return res & 0xffffffff;
+}
+
+
+/* Return number of 1-bits in VAL.  */
+
+static int
+bitcount (val)
+     unsigned long val;
+{
+  int nbits;
+  for (nbits = 0; val != 0; nbits++)
+    val &= val - 1;	/* delete rightmost 1-bit in val */
+  return nbits;
+}
+
+
+static CORE_ADDR
+thumb_get_next_pc (pc)
+     CORE_ADDR pc;
+{
+  unsigned long pc_val = ((unsigned long)pc) + 4;	/* PC after prefetch */
+  unsigned short inst1 = read_memory_integer (pc, 2);
+  CORE_ADDR nextpc = pc + 2;		/* default is next instruction */
+  unsigned long offset;
+
+  if ((inst1 & 0xff00) == 0xbd00)	/* pop {rlist, pc} */
+    {
+      CORE_ADDR sp;
+
+      /* Fetch the saved PC from the stack.  It's stored above
+         all of the other registers.  */
+      offset = bitcount (bits (inst1, 0, 7)) * REGISTER_SIZE;
+      sp = read_register (SP_REGNUM);
+      nextpc = (CORE_ADDR) read_memory_integer (sp + offset, 4);
+      nextpc = ADDR_BITS_REMOVE (nextpc);
+      if (nextpc == pc)
+	error ("Infinite loop detected");
+    }
+  else if ((inst1 & 0xf000) == 0xd000)	/* conditional branch */
+    {
+      unsigned long status = read_register (PS_REGNUM);
+      unsigned long cond = bits (inst1, 8, 11); 
+      if (cond != 0x0f && condition_true (cond, status))	/* 0x0f = SWI */
+	nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
+    }
+  else if ((inst1 & 0xf800) == 0xe000)	/* unconditional branch */
+    {
+      nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
+    }
+  else if ((inst1 & 0xf800) == 0xf000)	/* long branch with link */
+    {
+      unsigned short inst2 = read_memory_integer (pc + 2, 2);
+      offset = (sbits (inst1, 0, 10) << 12) + (bits  (inst2, 0, 10) << 1);
+      nextpc = pc_val + offset;
+    }
+
+  return nextpc;
+}
+
+
+CORE_ADDR
+arm_get_next_pc (pc)
+     CORE_ADDR pc;
+{
+  unsigned long pc_val;
+  unsigned long this_instr;
+  unsigned long status;
+  CORE_ADDR nextpc;
+
+  if (arm_pc_is_thumb (pc))
+    return thumb_get_next_pc (pc);
+
+  pc_val = (unsigned long) pc;
+  this_instr = read_memory_integer (pc, 4);
+  status = read_register (PS_REGNUM);
+  nextpc = (CORE_ADDR) (pc_val + 4);  /* Default case */
+
+  if (condition_true (bits (this_instr, 28, 31), status))
+    {
+      switch (bits (this_instr, 24, 27))
+	{
+	case 0x0: case 0x1: /* data processing */
+	case 0x2: case 0x3:
+	  {
+	    unsigned long operand1, operand2, result = 0;
+	    unsigned long rn;
+	    int c;
+ 
+	    if (bits (this_instr, 12, 15) != 15)
+	      break;
+
+	    if (bits (this_instr, 22, 25) == 0
+		&& bits (this_instr, 4, 7) == 9)  /* multiply */
+	      error ("Illegal update to pc in instruction");
+
+	    /* Multiply into PC */
+	    c = (status & FLAG_C) ? 1 : 0;
+	    rn = bits (this_instr, 16, 19);
+	    operand1 = (rn == 15) ? pc_val + 8 : read_register (rn);
+ 
+	    if (bit (this_instr, 25))
+	      {
+		unsigned long immval = bits (this_instr, 0, 7);
+		unsigned long rotate = 2 * bits (this_instr, 8, 11);
+		operand2 = ((immval >> rotate) | (immval << (32-rotate)))
+			   & 0xffffffff;
+	      }
+	    else  /* operand 2 is a shifted register */
+	      operand2 = shifted_reg_val (this_instr, c, pc_val, status);
+ 
+	    switch (bits (this_instr, 21, 24))
+	      {
+	      case 0x0: /*and*/
+		result = operand1 & operand2;
+		break;
+
+	      case 0x1: /*eor*/
+		result = operand1 ^ operand2;
+		break;
+
+	      case 0x2: /*sub*/
+		result = operand1 - operand2;
+		break;
+
+	      case 0x3: /*rsb*/
+		result = operand2 - operand1;
+		break;
+
+	      case 0x4:  /*add*/
+		result = operand1 + operand2;
+		break;
+
+	      case 0x5: /*adc*/
+		result = operand1 + operand2 + c;
+		break;
+
+	      case 0x6: /*sbc*/
+		result = operand1 - operand2 + c;
+		break;
+
+	      case 0x7: /*rsc*/
+		result = operand2 - operand1 + c;
+		break;
+
+	      case 0x8: case 0x9: case 0xa: case 0xb: /* tst, teq, cmp, cmn */
+		result = (unsigned long) nextpc;
+		break;
+
+	      case 0xc: /*orr*/
+		result = operand1 | operand2;
+		break;
+
+	      case 0xd: /*mov*/
+		/* Always step into a function.  */
+		result = operand2;
+                break;
+
+	      case 0xe: /*bic*/
+		result = operand1 & ~operand2;
+		break;
+
+	      case 0xf: /*mvn*/
+		result = ~operand2;
+		break;
+	      }
+	    nextpc = (CORE_ADDR) ADDR_BITS_REMOVE (result);
+
+	    if (nextpc == pc)
+	      error ("Infinite loop detected");
+	    break;
+	  }
+ 
+	case 0x4: case 0x5: /* data transfer */
+	case 0x6: case 0x7:
+	  if (bit (this_instr, 20))
+	    {
+	      /* load */
+	      if (bits (this_instr, 12, 15) == 15)
+		{
+		  /* rd == pc */
+		  unsigned long  rn;
+		  unsigned long base;
+ 
+		  if (bit (this_instr, 22))
+		    error ("Illegal update to pc in instruction");
+
+		  /* byte write to PC */
+		  rn = bits (this_instr, 16, 19);
+		  base = (rn == 15) ? pc_val + 8 : read_register (rn);
+		  if (bit (this_instr, 24))
+		    {
+		      /* pre-indexed */
+		      int c = (status & FLAG_C) ? 1 : 0;
+		      unsigned long offset =
+			(bit (this_instr, 25)
+			 ? shifted_reg_val (this_instr, c, pc_val)
+			 : bits (this_instr, 0, 11));
+
+		      if (bit (this_instr, 23))
+			base += offset;
+		      else
+			base -= offset;
+		    }
+		  nextpc = (CORE_ADDR) read_memory_integer ((CORE_ADDR) base, 
+							    4);
+ 
+		  nextpc = ADDR_BITS_REMOVE (nextpc);
+
+		  if (nextpc == pc)
+		    error ("Infinite loop detected");
+		}
+	    }
+	  break;
+ 
+	case 0x8: case 0x9: /* block transfer */
+	  if (bit (this_instr, 20))
+	    {
+	      /* LDM */
+	      if (bit (this_instr, 15))
+		{
+		  /* loading pc */
+		  int offset = 0;
+
+		  if (bit (this_instr, 23))
+		    {
+		      /* up */
+		      unsigned long reglist = bits (this_instr, 0, 14);
+		      offset = bitcount (reglist) * 4;
+		      if (bit (this_instr, 24)) /* pre */
+			offset += 4;
+		    }
+		  else if (bit (this_instr, 24))
+		    offset = -4;
+ 
+		  {
+		    unsigned long rn_val = 
+		      read_register (bits (this_instr, 16, 19));
+		    nextpc =
+		      (CORE_ADDR) read_memory_integer ((CORE_ADDR) (rn_val
+								    + offset),
+						       4);
+		  }
+		  nextpc = ADDR_BITS_REMOVE (nextpc);
+		  if (nextpc == pc)
+		    error ("Infinite loop detected");
+		}
+	    }
+	  break;
+ 
+	case 0xb:           /* branch & link */
+	case 0xa:           /* branch */
+	  {
+	    nextpc = BranchDest (pc, this_instr);
+
+	    nextpc = ADDR_BITS_REMOVE (nextpc);
+	    if (nextpc == pc)
+	      error ("Infinite loop detected");
+	    break;
+	  }
+ 
+	case 0xc: case 0xd:
+	case 0xe:           /* coproc ops */
+	case 0xf:           /* SWI */
+	  break;
+
+	default:
+	  fprintf (stderr, "Bad bit-field extraction\n");
+	  return (pc);
+	}
+    }
+
+  return nextpc;
+}
+
+#include "bfd-in2.h"
+#include "libcoff.h"
+
+static int
+gdb_print_insn_arm (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info * info;
+{
+  if (arm_pc_is_thumb (memaddr))
+    {
+      static asymbol *                  asym;
+      static combined_entry_type        ce;
+      static struct coff_symbol_struct  csym;
+      static struct _bfd                fake_bfd;
+      static bfd_target                 fake_target;
+
+      if (csym.native == NULL)
+	{
+	  /* Create a fake symbol vector containing a Thumb symbol.  This is
+	     solely so that the code in print_insn_little_arm() and
+	     print_insn_big_arm() in opcodes/arm-dis.c will detect the presence
+	     of a Thumb symbol and switch to decoding Thumb instructions.  */
+	     
+	  fake_target.flavour  = bfd_target_coff_flavour;
+	  fake_bfd.xvec        = & fake_target;
+	  ce.u.syment.n_sclass = C_THUMBEXTFUNC;
+	  csym.native          = & ce;
+	  csym.symbol.the_bfd  = & fake_bfd;
+	  csym.symbol.name     = "fake";
+	  asym                 = (asymbol *) & csym;
+	}
+      
+      memaddr = UNMAKE_THUMB_ADDR (memaddr);
+      info->symbols = & asym;
+    }
+  else
+    info->symbols = NULL;
+  
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return print_insn_big_arm (memaddr, info);
+  else
+    return print_insn_little_arm (memaddr, info);
+}
+
+/* Sequence of bytes for breakpoint instruction.  */
+#define ARM_LE_BREAKPOINT {0xFE,0xDE,0xFF,0xE7} /* Recognized illegal opcodes */
+#define ARM_BE_BREAKPOINT {0xE7,0xFF,0xDE,0xFE} 
+#define THUMB_LE_BREAKPOINT {0xfe,0xdf}       
+#define THUMB_BE_BREAKPOINT {0xdf,0xfe}       
+
+/* The following has been superseded by BREAKPOINT_FOR_PC, but
+   is defined merely to keep mem-break.c happy.  */
+#define LITTLE_BREAKPOINT ARM_LE_BREAKPOINT
+#define BIG_BREAKPOINT    ARM_BE_BREAKPOINT
+
+/* This function implements the BREAKPOINT_FROM_PC macro.  It uses the program
+   counter value to determine whether a 16- or 32-bit breakpoint should be
+   used.  It returns a pointer to a string of bytes that encode a breakpoint
+   instruction, stores the length of the string to *lenptr, and adjusts pc
+   (if necessary) to point to the actual memory location where the
+   breakpoint should be inserted.  */
+
+unsigned char *
+arm_breakpoint_from_pc (pcptr, lenptr)
+     CORE_ADDR * pcptr;
+     int * lenptr;
+{
+  if (arm_pc_is_thumb (*pcptr) || arm_pc_is_thumb_dummy (*pcptr))
+    {
+      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+        {
+          static char thumb_breakpoint[] = THUMB_BE_BREAKPOINT;
+          *pcptr = UNMAKE_THUMB_ADDR (*pcptr);
+          *lenptr = sizeof (thumb_breakpoint);
+          return thumb_breakpoint;
+         }
+      else
+        {
+          static char thumb_breakpoint[] = THUMB_LE_BREAKPOINT;
+          *pcptr = UNMAKE_THUMB_ADDR (*pcptr);
+          *lenptr = sizeof (thumb_breakpoint);
+          return thumb_breakpoint;
+        }
+    }
+  else
+    {
+      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+        {
+          static char arm_breakpoint[] = ARM_BE_BREAKPOINT;
+          *lenptr = sizeof (arm_breakpoint);
+          return arm_breakpoint;
+        }
+      else
+        {
+          static char arm_breakpoint[] = ARM_LE_BREAKPOINT;
+          *lenptr = sizeof (arm_breakpoint);
+          return arm_breakpoint;
+        }
+    }
+}
+/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
+   This implements the IN_SOLIB_CALL_TRAMPOLINE macro.  */
+
+int
+arm_in_call_stub (pc, name)
+     CORE_ADDR pc;
+     char * name;
+{
+  CORE_ADDR start_addr;
+
+  /* Find the starting address of the function containing the PC.  If the
+     caller didn't give us a name, look it up at the same time.  */
+  if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+    return 0;
+
+  return strncmp (name, "_call_via_r", 11) == 0;
+}
+
+
+/* If PC is in a Thumb call or return stub, return the address of the target
+   PC, which is in a register.  The thunk functions are called _called_via_xx,
+   where x is the register name.  The possible names are r0-r9, sl, fp, ip,
+   sp, and lr. */
+
+CORE_ADDR
+arm_skip_stub (pc)
+     CORE_ADDR pc;
+{
+  char * name;
+  CORE_ADDR start_addr;
+
+  /* Find the starting address and name of the function containing the PC.  */
+  if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+    return 0;
+
+  /* Call thunks always start with "_call_via_".  */
+  if (strncmp (name, "_call_via_", 10) == 0)
+    {
+      /* Use the name suffix to determine which register contains
+         the target PC.  */
+      static char *table[15] = 
+	{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+	  "r8", "r9", "sl", "fp", "ip", "sp", "lr"
+	};
+      int regno;
+
+      for (regno = 0; regno <= 14; regno++)
+	if (strcmp (&name[10], table[regno]) == 0)
+	  return read_register (regno);
+    }
+  return 0;	/* not a stub */
+}
+
+
+void
+_initialize_arm_tdep ()
+{
+  tm_print_insn = gdb_print_insn_arm;
+
+  add_com ("othernames", class_obscure, arm_othernames,
+	   "Switch to the other set of register names.");
+
+  /* ??? Maybe this should be a boolean.  */
+  add_show_from_set (add_set_cmd ("apcs32", no_class,
+				  var_zinteger, (char *)&arm_apcs_32,
+				  "Set usage of ARM 32-bit mode.\n", &setlist),
+		     & showlist);
+
+}
+
+/* Test whether the coff symbol specific value corresponds to a Thumb function */
+int
+coff_sym_is_thumb(int val)
+{
+	return (val == C_THUMBEXT ||
+      val == C_THUMBSTAT ||
+      val == C_THUMBEXTFUNC ||
+      val == C_THUMBSTATFUNC ||
+      val == C_THUMBLABEL);
+}
diff --git a/gdb/arm-xdep.c b/gdb/arm-xdep.c
new file mode 100644
index 0000000..f0d806e
--- /dev/null
+++ b/gdb/arm-xdep.c
@@ -0,0 +1,559 @@
+/* Acorn Risc Machine host machine support.
+   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "arm-opcode.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+
+#define N_TXTADDR(hdr) 0x8000
+#define N_DATADDR(hdr) (hdr.a_text + 0x8000)
+
+#include "gdbcore.h"
+
+#include <sys/user.h>		/* After a.out.h  */
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#include <errno.h>
+
+void
+fetch_inferior_registers (regno)
+     int regno;		/* Original value discarded */
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  struct user u;
+  unsigned int offset = (char *) &u.u_ar0 - (char *) &u;
+  offset = ptrace (PT_READ_U, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0)
+      - KERNEL_U_ADDR;
+
+  registers_fetched ();
+  
+  for (regno = 0; regno < 16; regno++)
+    {
+      regaddr = offset + regno * 4;
+      *(int *)&buf[0] = ptrace (PT_READ_U, inferior_pid,
+				(PTRACE_ARG3_TYPE) regaddr, 0);
+      if (regno == PC_REGNUM)
+	  *(int *)&buf[0] = GET_PC_PART(*(int *)&buf[0]);
+      supply_register (regno, buf);
+    }
+  *(int *)&buf[0] = ptrace (PT_READ_U, inferior_pid,
+			    (PTRACE_ARG3_TYPE) (offset + PC*4), 0);
+  supply_register (PS_REGNUM, buf); /* set virtual register ps same as pc */
+
+  /* read the floating point registers */
+  offset = (char *) &u.u_fp_regs - (char *)&u;
+  *(int *)buf = ptrace (PT_READ_U, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0);
+  supply_register (FPS_REGNUM, buf);
+  for (regno = 16; regno < 24; regno++) {
+      regaddr = offset + 4 + 12 * (regno - 16);
+      for (i = 0; i < 12; i += sizeof(int))
+	  *(int *) &buf[i] = ptrace (PT_READ_U, inferior_pid,
+				     (PTRACE_ARG3_TYPE) (regaddr + i), 0);
+      supply_register (regno, buf);
+  }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  struct user u;
+  unsigned long value;
+  unsigned int offset = (char *) &u.u_ar0 - (char *) &u;
+  offset = ptrace (PT_READ_U, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0)
+      - KERNEL_U_ADDR;
+
+  if (regno >= 0) {
+      if (regno >= 16) return;
+      regaddr = offset + 4 * regno;
+      errno = 0;
+      value = read_register(regno);
+      if (regno == PC_REGNUM)
+	  value = SET_PC_PART(read_register (PS_REGNUM), value);
+      ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, value);
+      if (errno != 0)
+	{
+	  sprintf (buf, "writing register number %d", regno);
+	  perror_with_name (buf);
+	}
+    }
+  else for (regno = 0; regno < 15; regno++)
+    {
+      regaddr = offset + regno * 4;
+      errno = 0;
+      value = read_register(regno);
+      if (regno == PC_REGNUM)
+	  value = SET_PC_PART(read_register (PS_REGNUM), value);
+      ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, value);
+      if (errno != 0)
+	{
+	  sprintf (buf, "writing all regs, number %d", regno);
+	  perror_with_name (buf);
+	}
+    }
+}
+
+/* Work with core dump and executable files, for GDB. 
+   This code would be in corefile.c if it weren't machine-dependent. */
+
+/* Structure to describe the chain of shared libraries used
+   by the execfile.
+   e.g. prog shares Xt which shares X11 which shares c. */
+
+struct shared_library {
+    struct exec_header header;
+    char name[SHLIBLEN];
+    CORE_ADDR text_start;	/* CORE_ADDR of 1st byte of text, this file */
+    long data_offset;		/* offset of data section in file */
+    int chan;			/* file descriptor for the file */
+    struct shared_library *shares; /* library this one shares */
+};
+static struct shared_library *shlib = 0;
+
+/* Hook for `exec_file_command' command to call.  */
+
+extern void (*exec_file_display_hook) ();
+   
+static CORE_ADDR unshared_text_start;
+
+/* extended header from exec file (for shared library info) */
+
+static struct exec_header exec_header;
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  extern char registers[];
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
+      {
+	struct user u;
+
+	unsigned int reg_offset, fp_reg_offset;
+
+	val = myread (corechan, &u, sizeof u);
+	if (val < 0)
+	  perror_with_name ("Not a core file: reading upage");
+	if (val != sizeof u)
+	  error ("Not a core file: could only read %d bytes", val);
+
+	/* We are depending on exec_file_command having been called
+	   previously to set exec_data_start.  Since the executable
+	   and the core file share the same text segment, the address
+	   of the data segment will be the same in both.  */
+	data_start = exec_data_start;
+
+	data_end = data_start + NBPG * u.u_dsize;
+	stack_start = stack_end - NBPG * u.u_ssize;
+	data_offset = NBPG * UPAGES;
+	stack_offset = NBPG * (UPAGES + u.u_dsize);
+
+	/* Some machines put an absolute address in here and some put
+	   the offset in the upage of the regs.  */
+	reg_offset = (int) u.u_ar0;
+	if (reg_offset > NBPG * UPAGES)
+	  reg_offset -= KERNEL_U_ADDR;
+	fp_reg_offset = (char *) &u.u_fp_regs - (char *)&u;
+
+	/* I don't know where to find this info.
+	   So, for now, mark it as not available.  */
+	N_SET_MAGIC (core_aouthdr, 0);
+
+	/* Read the register values out of the core file and store
+	   them where `read_register' will find them.  */
+
+	{
+	  register int regno;
+
+	  for (regno = 0; regno < NUM_REGS; regno++)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      if (regno < 16)
+		  val = lseek (corechan, reg_offset + 4 * regno, 0);
+	      else if (regno < 24)
+		  val = lseek (corechan, fp_reg_offset + 4 + 12*(regno - 24), 0);
+	      else if (regno == 24)
+		  val = lseek (corechan, fp_reg_offset, 0);
+	      else if (regno == 25)
+		  val = lseek (corechan, reg_offset + 4 * PC, 0);
+	      if (val < 0
+		  || (val = myread (corechan, buf, sizeof buf)) < 0)
+		{
+		  char * buffer = (char *) alloca (strlen (REGISTER_NAME (regno))
+						   + 30);
+		  strcpy (buffer, "Reading register ");
+		  strcat (buffer, REGISTER_NAME (regno));
+						   
+		  perror_with_name (buffer);
+		}
+
+	      if (regno == PC_REGNUM)
+		  *(int *)buf = GET_PC_PART(*(int *)buf);
+	      supply_register (regno, buf);
+	    }
+	}
+      }
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	{
+	  corefile = concat (current_directory, "/", filename, NULL);
+	}
+
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+      validate_files ();
+    }
+  else if (from_tty)
+    printf ("No core file now.\n");
+}
+
+#if 0
+/* Work with core dump and executable files, for GDB. 
+   This code would be in corefile.c if it weren't machine-dependent. */
+
+/* Structure to describe the chain of shared libraries used
+   by the execfile.
+   e.g. prog shares Xt which shares X11 which shares c. */
+
+struct shared_library {
+    struct exec_header header;
+    char name[SHLIBLEN];
+    CORE_ADDR text_start;	/* CORE_ADDR of 1st byte of text, this file */
+    long data_offset;		/* offset of data section in file */
+    int chan;			/* file descriptor for the file */
+    struct shared_library *shares; /* library this one shares */
+};
+static struct shared_library *shlib = 0;
+
+/* Hook for `exec_file_command' command to call.  */
+
+extern void (*exec_file_display_hook) ();
+   
+static CORE_ADDR unshared_text_start;
+
+/* extended header from exec file (for shared library info) */
+
+static struct exec_header exec_header;
+
+void
+exec_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+
+  /* Eliminate all traces of old exec file.
+     Mark text segment as empty.  */
+
+  if (execfile)
+    free (execfile);
+  execfile = 0;
+  data_start = 0;
+  data_end -= exec_data_start;
+  text_start = 0;
+  unshared_text_start = 0;
+  text_end = 0;
+  exec_data_start = 0;
+  exec_data_end = 0;
+  if (execchan >= 0)
+    close (execchan);
+  execchan = -1;
+  if (shlib) {
+      close_shared_library(shlib);
+      shlib = 0;
+  }
+
+  /* Now open and digest the file the user requested, if any.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+
+      execchan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
+			&execfile);
+      if (execchan < 0)
+	perror_with_name (filename);
+
+      {
+	struct stat st_exec;
+
+#ifdef HEADER_SEEK_FD
+	HEADER_SEEK_FD (execchan);
+#endif
+	
+	val = myread (execchan, &exec_header, sizeof exec_header);
+	exec_aouthdr = exec_header.a_exec;
+
+	if (val < 0)
+	  perror_with_name (filename);
+
+	text_start = 0x8000;
+
+	/* Look for shared library if needed */
+	if (exec_header.a_exec.a_magic & MF_USES_SL)
+	    shlib = open_shared_library(exec_header.a_shlibname, text_start);
+
+	text_offset = N_TXTOFF (exec_aouthdr);
+	exec_data_offset = N_TXTOFF (exec_aouthdr) + exec_aouthdr.a_text;
+
+	if (shlib) {
+	    unshared_text_start = shared_text_end(shlib) & ~0x7fff;
+	    stack_start = shlib->header.a_exec.a_sldatabase;
+	    stack_end = STACK_END_ADDR;
+	} else
+	    unshared_text_start = 0x8000;
+	text_end = unshared_text_start + exec_aouthdr.a_text;
+
+	exec_data_start = unshared_text_start + exec_aouthdr.a_text;
+        exec_data_end = exec_data_start + exec_aouthdr.a_data;
+
+	data_start = exec_data_start;
+	data_end += exec_data_start;
+
+	fstat (execchan, &st_exec);
+	exec_mtime = st_exec.st_mtime;
+      }
+
+      validate_files ();
+    }
+  else if (from_tty)
+    printf ("No executable file now.\n");
+
+  /* Tell display code (if any) about the changed file name.  */
+  if (exec_file_display_hook)
+    (*exec_file_display_hook) (filename);
+}
+#endif
+
+#if 0
+/* Read from the program's memory (except for inferior processes).
+   This function is misnamed, since it only reads, never writes; and
+   since it will use the core file and/or executable file as necessary.
+
+   It should be extended to write as well as read, FIXME, for patching files.
+
+   Return 0 if address could be read, EIO if addresss out of bounds.  */
+
+int
+xfer_core_file (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  register int val;
+  int xferchan;
+  char **xferfile;
+  int fileptr;
+  int returnval = 0;
+
+  while (len > 0)
+    {
+      xferfile = 0;
+      xferchan = 0;
+
+      /* Determine which file the next bunch of addresses reside in,
+	 and where in the file.  Set the file's read/write pointer
+	 to point at the proper place for the desired address
+	 and set xferfile and xferchan for the correct file.
+
+	 If desired address is nonexistent, leave them zero.
+
+	 i is set to the number of bytes that can be handled
+	 along with the next address.
+
+	 We put the most likely tests first for efficiency.  */
+
+      /* Note that if there is no core file
+	 data_start and data_end are equal.  */
+      if (memaddr >= data_start && memaddr < data_end)
+	{
+	  i = min (len, data_end - memaddr);
+	  fileptr = memaddr - data_start + data_offset;
+	  xferfile = &corefile;
+	  xferchan = corechan;
+	}
+      /* Note that if there is no core file
+	 stack_start and stack_end define the shared library data.  */
+      else if (memaddr >= stack_start && memaddr < stack_end)
+	{
+	    if (corechan < 0) {
+		struct shared_library *lib;
+		for (lib = shlib; lib; lib = lib->shares)
+		    if (memaddr >= lib->header.a_exec.a_sldatabase &&
+			memaddr < lib->header.a_exec.a_sldatabase +
+			  lib->header.a_exec.a_data)
+			break;
+		if (lib) {
+		    i = min (len, lib->header.a_exec.a_sldatabase +
+			     lib->header.a_exec.a_data - memaddr);
+		    fileptr = lib->data_offset + memaddr -
+			lib->header.a_exec.a_sldatabase;
+		    xferfile = execfile;
+		    xferchan = lib->chan;
+		}
+	    } else {
+		i = min (len, stack_end - memaddr);
+		fileptr = memaddr - stack_start + stack_offset;
+		xferfile = &corefile;
+		xferchan = corechan;
+	    }
+	}
+      else if (corechan < 0
+	       && memaddr >= exec_data_start && memaddr < exec_data_end)
+	{
+	  i = min (len, exec_data_end - memaddr);
+	  fileptr = memaddr - exec_data_start + exec_data_offset;
+	  xferfile = &execfile;
+	  xferchan = execchan;
+	}
+      else if (memaddr >= text_start && memaddr < text_end)
+	{
+	    struct shared_library *lib;
+	    for (lib = shlib; lib; lib = lib->shares)
+		if (memaddr >= lib->text_start &&
+		    memaddr < lib->text_start + lib->header.a_exec.a_text)
+		    break;
+	    if (lib) {
+		i = min (len, lib->header.a_exec.a_text +
+			 lib->text_start - memaddr);
+		fileptr = memaddr - lib->text_start + text_offset;
+		xferfile = &execfile;
+		xferchan = lib->chan;
+	    } else {
+		i = min (len, text_end - memaddr);
+		fileptr = memaddr - unshared_text_start + text_offset;
+		xferfile = &execfile;
+		xferchan = execchan;
+	    }
+	}
+      else if (memaddr < text_start)
+	{
+	  i = min (len, text_start - memaddr);
+	}
+      else if (memaddr >= text_end
+	       && memaddr < (corechan >= 0? data_start : exec_data_start))
+	{
+	  i = min (len, data_start - memaddr);
+	}
+      else if (corechan >= 0
+	       && memaddr >= data_end && memaddr < stack_start)
+	{
+	  i = min (len, stack_start - memaddr);
+	}
+      else if (corechan < 0 && memaddr >= exec_data_end)
+	{
+	  i = min (len, - memaddr);
+	}
+      else if (memaddr >= stack_end && stack_end != 0)
+	{
+	  i = min (len, - memaddr);
+	}
+      else
+	{
+	  /* Address did not classify into one of the known ranges.
+	     This shouldn't happen; we catch the endpoints.  */
+	  fatal ("Internal: Bad case logic in xfer_core_file.");
+	}
+
+      /* Now we know which file to use.
+	 Set up its pointer and transfer the data.  */
+      if (xferfile)
+	{
+	  if (*xferfile == 0)
+	    if (xferfile == &execfile)
+	      error ("No program file to examine.");
+	    else
+	      error ("No core dump file or running program to examine.");
+	  val = lseek (xferchan, fileptr, 0);
+	  if (val < 0)
+	    perror_with_name (*xferfile);
+	  val = myread (xferchan, myaddr, i);
+	  if (val < 0)
+	    perror_with_name (*xferfile);
+	}
+      /* If this address is for nonexistent memory,
+	 read zeros if reading, or do nothing if writing.
+	 Actually, we never right.  */
+      else
+	{
+	  memset (myaddr, '\0', i);
+	  returnval = EIO;
+	}
+
+      memaddr += i;
+      myaddr += i;
+      len -= i;
+    }
+  return returnval;
+}
+#endif
diff --git a/gdb/ax-gdb.c b/gdb/ax-gdb.c
new file mode 100644
index 0000000..c518e19
--- /dev/null
+++ b/gdb/ax-gdb.c
@@ -0,0 +1,1942 @@
+/* GDB-specific functions for operating on agent expressions
+   Copyright 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* $Id$ */
+
+#include "defs.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "expression.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "frame.h"
+#include "target.h"
+#include "ax.h"
+#include "ax-gdb.h"
+
+/* Probably the best way to read this file is to start with the types
+   and enums in ax-gdb.h, and then look at gen_expr, towards the
+   bottom; that's the main function that looks at the GDB expressions
+   and calls everything else to generate code.
+
+   I'm beginning to wonder whether it wouldn't be nicer to internally
+   generate trees, with types, and then spit out the bytecode in
+   linear form afterwards; we could generate fewer `swap', `ext', and
+   `zero_ext' bytecodes that way; it would make good constant folding
+   easier, too.  But at the moment, I think we should be willing to
+   pay for the simplicity of this code with less-than-optimal bytecode
+   strings.
+
+   Remember, "GBD" stands for "Great Britain, Dammit!"  So be careful.  */ 
+
+
+
+/* Prototypes for local functions. */
+
+/* There's a standard order to the arguments of these functions:
+   union exp_element ** --- pointer into expression
+   struct agent_expr * --- agent expression buffer to generate code into
+   struct axs_value * --- describes value left on top of stack  */
+   
+static struct value *const_var_ref PARAMS ((struct symbol *var));
+static struct value *const_expr PARAMS ((union exp_element **pc));
+static struct value *maybe_const_expr PARAMS ((union exp_element **pc));
+
+static void gen_traced_pop PARAMS ((struct agent_expr *, struct axs_value *));
+
+static void gen_sign_extend PARAMS ((struct agent_expr *, struct type *));
+static void gen_extend PARAMS ((struct agent_expr *, struct type *));
+static void gen_fetch PARAMS ((struct agent_expr *, struct type *));
+static void gen_left_shift PARAMS ((struct agent_expr *, int));
+
+
+static void gen_frame_args_address   PARAMS ((struct agent_expr *));
+static void gen_frame_locals_address PARAMS ((struct agent_expr *));
+static void gen_offset PARAMS ((struct agent_expr *ax, int offset));
+static void gen_sym_offset PARAMS ((struct agent_expr *, struct symbol *));
+static void gen_var_ref PARAMS ((struct agent_expr *ax,
+				 struct axs_value *value,
+				 struct symbol *var));
+
+
+static void gen_int_literal PARAMS ((struct agent_expr *ax,
+				     struct axs_value *value,
+				     LONGEST k, struct type *type));
+
+
+static void require_rvalue PARAMS ((struct agent_expr *ax,
+				    struct axs_value *value));
+static void gen_usual_unary PARAMS ((struct agent_expr *ax,
+				     struct axs_value *value));
+static int type_wider_than PARAMS ((struct type *type1,
+				    struct type *type2));
+static struct type *max_type PARAMS ((struct type *type1, 
+				      struct type *type2));
+static void gen_conversion PARAMS ((struct agent_expr *ax,
+				    struct type *from,
+				    struct type *to));
+static int is_nontrivial_conversion PARAMS ((struct type *from,
+					     struct type *to));
+static void gen_usual_arithmetic PARAMS ((struct agent_expr *ax,
+					  struct axs_value *value1,
+					  struct axs_value *value2));
+static void gen_integral_promotions PARAMS ((struct agent_expr *ax,
+					     struct axs_value *value));
+static void gen_cast PARAMS ((struct agent_expr *ax,
+			      struct axs_value *value,
+			      struct type *type));
+static void gen_scale PARAMS ((struct agent_expr *ax,
+			       enum agent_op op,
+			       struct type *type));
+static void gen_add PARAMS ((struct agent_expr *ax,
+			     struct axs_value *value, 
+			     struct axs_value *value1,
+			     struct axs_value *value2,
+			     char *name));
+static void gen_sub PARAMS ((struct agent_expr *ax,
+			     struct axs_value *value, 
+			     struct axs_value *value1,
+			     struct axs_value *value2));
+static void gen_binop PARAMS ((struct agent_expr *ax,
+			       struct axs_value *value,
+			       struct axs_value *value1,
+			       struct axs_value *value2,
+			       enum agent_op op,
+			       enum agent_op op_unsigned,
+			       int may_carry,
+			       char *name));
+static void gen_logical_not PARAMS ((struct agent_expr *ax,
+				     struct axs_value *value));
+static void gen_complement PARAMS ((struct agent_expr *ax,
+				    struct axs_value *value));
+static void gen_deref PARAMS ((struct agent_expr *, struct axs_value *));
+static void gen_address_of PARAMS ((struct agent_expr *, struct axs_value *));
+static int find_field PARAMS ((struct type *type, char *name));
+static void gen_bitfield_ref PARAMS ((struct agent_expr *ax,
+				      struct axs_value *value,
+				      struct type *type,
+				      int start, int end));
+static void gen_struct_ref PARAMS ((struct agent_expr *ax,
+				    struct axs_value *value,
+				    char *field,
+				    char *operator_name,
+				    char *operand_name));
+static void gen_repeat PARAMS ((union exp_element **pc,
+				struct agent_expr *ax,
+				struct axs_value *value));
+static void gen_sizeof PARAMS ((union exp_element **pc,
+				struct agent_expr *ax,
+				struct axs_value *value));
+static void gen_expr PARAMS ((union exp_element **pc,
+			      struct agent_expr *ax,
+			      struct axs_value *value));
+
+static void print_axs_value PARAMS ((GDB_FILE *f, struct axs_value *value));
+static void agent_command PARAMS ((char *exp, int from_tty));
+
+
+/* Detecting constant expressions.  */
+
+/* If the variable reference at *PC is a constant, return its value.
+   Otherwise, return zero.
+
+   Hey, Wally!  How can a variable reference be a constant?
+
+   Well, Beav, this function really handles the OP_VAR_VALUE operator,
+   not specifically variable references.  GDB uses OP_VAR_VALUE to
+   refer to any kind of symbolic reference: function names, enum
+   elements, and goto labels are all handled through the OP_VAR_VALUE
+   operator, even though they're constants.  It makes sense given the
+   situation.
+
+   Gee, Wally, don'cha wonder sometimes if data representations that
+   subvert commonly accepted definitions of terms in favor of heavily
+   context-specific interpretations are really just a tool of the
+   programming hegemony to preserve their power and exclude the
+   proletariat?  */
+
+static struct value *
+const_var_ref (var)
+     struct symbol *var;
+{
+  struct type *type = SYMBOL_TYPE (var);
+
+  switch (SYMBOL_CLASS (var))
+    {
+    case LOC_CONST:
+      return value_from_longest (type, (LONGEST) SYMBOL_VALUE (var));
+
+    case LOC_LABEL:
+      return value_from_longest (type, (LONGEST) SYMBOL_VALUE_ADDRESS (var));
+
+    default:
+      return 0;
+    }
+}
+
+
+/* If the expression starting at *PC has a constant value, return it.
+   Otherwise, return zero.  If we return a value, then *PC will be
+   advanced to the end of it.  If we return zero, *PC could be
+   anywhere.  */
+static struct value *
+const_expr (pc)
+     union exp_element **pc;
+{
+  enum exp_opcode op = (*pc)->opcode;
+  struct value *v1;
+
+  switch (op)
+    {
+    case OP_LONG:
+      {
+	struct type *type = (*pc)[1].type;
+	LONGEST k = (*pc)[2].longconst;
+	(*pc) += 4;
+	return value_from_longest (type, k);
+      }
+
+    case OP_VAR_VALUE:
+      {
+	struct value *v = const_var_ref ((*pc)[2].symbol);
+	(*pc) += 4;
+	return v;
+      }
+
+    /* We could add more operators in here.  */
+
+    case UNOP_NEG:
+      (*pc)++;
+      v1 = const_expr (pc);
+      if (v1)
+	return value_neg (v1);
+      else
+	return 0;
+
+    default:
+      return 0;
+    }
+}
+
+
+/* Like const_expr, but guarantee also that *PC is undisturbed if the
+   expression is not constant.  */
+static struct value *
+maybe_const_expr (pc)
+     union exp_element **pc;
+{
+  union exp_element *tentative_pc = *pc;
+  struct value *v = const_expr (&tentative_pc);
+
+  /* If we got a value, then update the real PC.  */
+  if (v)
+    *pc = tentative_pc;
+ 
+  return v;
+}
+
+
+/* Generating bytecode from GDB expressions: general assumptions */
+
+/* Here are a few general assumptions made throughout the code; if you
+   want to make a change that contradicts one of these, then you'd
+   better scan things pretty thoroughly.
+
+   - We assume that all values occupy one stack element.  For example,
+     sometimes we'll swap to get at the left argument to a binary
+     operator.  If we decide that void values should occupy no stack
+     elements, or that synthetic arrays (whose size is determined at
+     run time, created by the `@' operator) should occupy two stack
+     elements (address and length), then this will cause trouble.
+
+   - We assume the stack elements are infinitely wide, and that we
+     don't have to worry what happens if the user requests an
+     operation that is wider than the actual interpreter's stack.
+     That is, it's up to the interpreter to handle directly all the
+     integer widths the user has access to.  (Woe betide the language
+     with bignums!)
+
+   - We don't support side effects.  Thus, we don't have to worry about
+     GCC's generalized lvalues, function calls, etc.
+
+   - We don't support floating point.  Many places where we switch on
+     some type don't bother to include cases for floating point; there
+     may be even more subtle ways this assumption exists.  For
+     example, the arguments to % must be integers.
+
+   - We assume all subexpressions have a static, unchanging type.  If
+     we tried to support convenience variables, this would be a
+     problem.
+
+   - All values on the stack should always be fully zero- or
+     sign-extended.
+
+     (I wasn't sure whether to choose this or its opposite --- that
+     only addresses are assumed extended --- but it turns out that
+     neither convention completely eliminates spurious extend
+     operations (if everything is always extended, then you have to
+     extend after add, because it could overflow; if nothing is
+     extended, then you end up producing extends whenever you change
+     sizes), and this is simpler.)  */
+
+
+/* Generating bytecode from GDB expressions: the `trace' kludge  */
+
+/* The compiler in this file is a general-purpose mechanism for
+   translating GDB expressions into bytecode.  One ought to be able to
+   find a million and one uses for it.
+
+   However, at the moment it is HOPELESSLY BRAIN-DAMAGED for the sake
+   of expediency.  Let he who is without sin cast the first stone.
+
+   For the data tracing facility, we need to insert `trace' bytecodes
+   before each data fetch; this records all the memory that the
+   expression touches in the course of evaluation, so that memory will
+   be available when the user later tries to evaluate the expression
+   in GDB.
+
+   This should be done (I think) in a post-processing pass, that walks
+   an arbitrary agent expression and inserts `trace' operations at the
+   appropriate points.  But it's much faster to just hack them
+   directly into the code.  And since we're in a crunch, that's what
+   I've done.
+
+   Setting the flag trace_kludge to non-zero enables the code that
+   emits the trace bytecodes at the appropriate points.  */
+static int trace_kludge;
+
+/* Trace the lvalue on the stack, if it needs it.  In either case, pop
+   the value.  Useful on the left side of a comma, and at the end of
+   an expression being used for tracing.  */
+static void
+gen_traced_pop (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  if (trace_kludge)
+    switch (value->kind)
+      {
+      case axs_rvalue:
+	/* We don't trace rvalues, just the lvalues necessary to
+           produce them.  So just dispose of this value.  */
+	ax_simple (ax, aop_pop);
+	break;
+
+      case axs_lvalue_memory:
+	{
+	  int length = TYPE_LENGTH (value->type);
+
+	  /* There's no point in trying to use a trace_quick bytecode
+	     here, since "trace_quick SIZE pop" is three bytes, whereas
+	     "const8 SIZE trace" is also three bytes, does the same
+	     thing, and the simplest code which generates that will also
+	     work correctly for objects with large sizes.  */
+	  ax_const_l (ax, length);
+	  ax_simple (ax, aop_trace);
+	}
+      break;
+
+      case axs_lvalue_register:
+	/* We need to mention the register somewhere in the bytecode,
+	   so ax_reqs will pick it up and add it to the mask of
+	   registers used.  */
+	ax_reg (ax, value->u.reg);
+	ax_simple (ax, aop_pop);
+	break;
+      }
+  else
+    /* If we're not tracing, just pop the value.  */
+    ax_simple (ax, aop_pop);
+}
+
+
+
+/* Generating bytecode from GDB expressions: helper functions */
+
+/* Assume that the lower bits of the top of the stack is a value of
+   type TYPE, and the upper bits are zero.  Sign-extend if necessary.  */
+static void
+gen_sign_extend (ax, type)
+     struct agent_expr *ax;
+     struct type *type;
+{
+  /* Do we need to sign-extend this?  */
+  if (! TYPE_UNSIGNED (type))
+    ax_ext (ax, type->length * TARGET_CHAR_BIT);
+}
+
+
+/* Assume the lower bits of the top of the stack hold a value of type
+   TYPE, and the upper bits are garbage.  Sign-extend or truncate as
+   needed.  */
+static void
+gen_extend (ax, type)
+     struct agent_expr *ax;
+     struct type *type;
+{
+  int bits = type->length * TARGET_CHAR_BIT;
+  /* I just had to.  */
+  ((TYPE_UNSIGNED (type) ? ax_zero_ext : ax_ext) (ax, bits));
+}
+
+
+/* Assume that the top of the stack contains a value of type "pointer
+   to TYPE"; generate code to fetch its value.  Note that TYPE is the
+   target type, not the pointer type.  */
+static void
+gen_fetch (ax, type)
+     struct agent_expr *ax;
+     struct type *type;
+{
+  if (trace_kludge)
+    {
+      /* Record the area of memory we're about to fetch.  */
+      ax_trace_quick (ax, TYPE_LENGTH (type));
+    }
+
+  switch (type->code)
+    {
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_CHAR:
+      /* It's a scalar value, so we know how to dereference it.  How
+         many bytes long is it?  */
+      switch (type->length)
+	{
+	case 8  / TARGET_CHAR_BIT: ax_simple (ax, aop_ref8 ); break;
+	case 16 / TARGET_CHAR_BIT: ax_simple (ax, aop_ref16); break;
+	case 32 / TARGET_CHAR_BIT: ax_simple (ax, aop_ref32); break;
+	case 64 / TARGET_CHAR_BIT: ax_simple (ax, aop_ref64); break;
+
+	  /* Either our caller shouldn't have asked us to dereference
+	     that pointer (other code's fault), or we're not
+	     implementing something we should be (this code's fault).
+	     In any case, it's a bug the user shouldn't see.  */
+	default:
+	  error ("GDB bug: ax-gdb.c (gen_fetch): strange size");
+	}
+
+      gen_sign_extend (ax, type);
+      break;
+
+    default:
+      /* Either our caller shouldn't have asked us to dereference that
+	 pointer (other code's fault), or we're not implementing
+	 something we should be (this code's fault).  In any case,
+	 it's a bug the user shouldn't see.  */
+      error ("GDB bug: ax-gdb.c (gen_fetch): bad type code");
+    }
+}
+
+
+/* Generate code to left shift the top of the stack by DISTANCE bits, or
+   right shift it by -DISTANCE bits if DISTANCE < 0.  This generates
+   unsigned (logical) right shifts.  */
+static void
+gen_left_shift (ax, distance)
+     struct agent_expr *ax;
+     int distance;
+{
+  if (distance > 0)
+    {
+      ax_const_l (ax, distance);
+      ax_simple (ax, aop_lsh);
+    }
+  else if (distance < 0)
+    {
+      ax_const_l (ax, -distance);
+      ax_simple (ax, aop_rsh_unsigned);
+    }
+}
+
+
+
+/* Generating bytecode from GDB expressions: symbol references */
+
+/* Generate code to push the base address of the argument portion of
+   the top stack frame.  */
+static void
+gen_frame_args_address (ax)
+     struct agent_expr *ax;
+{
+  long frame_reg, frame_offset;
+
+  TARGET_VIRTUAL_FRAME_POINTER (ax->scope, &frame_reg, &frame_offset);
+  ax_reg     (ax, frame_reg);
+  gen_offset (ax, frame_offset);
+}
+
+
+/* Generate code to push the base address of the locals portion of the
+   top stack frame.  */
+static void
+gen_frame_locals_address (ax)
+     struct agent_expr *ax;
+{
+  long frame_reg, frame_offset;
+
+  TARGET_VIRTUAL_FRAME_POINTER (ax->scope, &frame_reg, &frame_offset);
+  ax_reg     (ax, frame_reg);
+  gen_offset (ax, frame_offset);
+}
+
+
+/* Generate code to add OFFSET to the top of the stack.  Try to
+   generate short and readable code.  We use this for getting to
+   variables on the stack, and structure members.  If we were
+   programming in ML, it would be clearer why these are the same
+   thing.  */
+static void
+gen_offset (ax, offset)
+     struct agent_expr *ax;
+     int offset;
+{
+  /* It would suffice to simply push the offset and add it, but this
+     makes it easier to read positive and negative offsets in the
+     bytecode.  */
+  if (offset > 0)
+    {
+      ax_const_l (ax, offset);
+      ax_simple (ax, aop_add);
+    }
+  else if (offset < 0)
+    {
+      ax_const_l (ax, -offset);
+      ax_simple (ax, aop_sub);
+    }
+}
+
+
+/* In many cases, a symbol's value is the offset from some other
+   address (stack frame, base register, etc.)  Generate code to add
+   VAR's value to the top of the stack.  */
+static void
+gen_sym_offset (ax, var)
+     struct agent_expr *ax;
+     struct symbol *var;
+{
+  gen_offset (ax, SYMBOL_VALUE (var));
+}
+
+
+/* Generate code for a variable reference to AX.  The variable is the
+   symbol VAR.  Set VALUE to describe the result.  */
+
+static void
+gen_var_ref (ax, value, var)
+     struct agent_expr *ax;
+     struct axs_value *value;
+     struct symbol *var;
+{
+  /* Dereference any typedefs. */
+  value->type = check_typedef (SYMBOL_TYPE (var));
+
+  /* I'm imitating the code in read_var_value.  */
+  switch (SYMBOL_CLASS (var))
+    {
+    case LOC_CONST:		/* A constant, like an enum value.  */
+      ax_const_l (ax, (LONGEST) SYMBOL_VALUE (var));
+      value->kind = axs_rvalue;
+      break;
+
+    case LOC_LABEL:		/* A goto label, being used as a value.  */
+      ax_const_l (ax, (LONGEST) SYMBOL_VALUE_ADDRESS (var));
+      value->kind = axs_rvalue;
+      break;
+
+    case LOC_CONST_BYTES:
+      error ("GDB bug: ax-gdb.c (gen_var_ref): LOC_CONST_BYTES symbols are not supported");
+
+      /* Variable at a fixed location in memory.  Easy.  */
+    case LOC_STATIC:
+      /* Push the address of the variable.  */
+      ax_const_l (ax, SYMBOL_VALUE_ADDRESS (var));
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_ARG:		/* var lives in argument area of frame */
+      gen_frame_args_address (ax);
+      gen_sym_offset (ax, var);
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_REF_ARG:		/* As above, but the frame slot really
+				   holds the address of the variable.  */
+      gen_frame_args_address (ax);
+      gen_sym_offset (ax, var);
+      /* Don't assume any particular pointer size.  */
+      gen_fetch (ax, lookup_pointer_type (builtin_type_void));
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_LOCAL:		/* var lives in locals area of frame */
+    case LOC_LOCAL_ARG:
+      gen_frame_locals_address (ax);
+      gen_sym_offset (ax, var);
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_BASEREG:		/* relative to some base register */
+    case LOC_BASEREG_ARG:
+      ax_reg (ax, SYMBOL_BASEREG (var));
+      gen_sym_offset (ax, var);
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_TYPEDEF:
+      error ("Cannot compute value of typedef `%s'.",
+	     SYMBOL_SOURCE_NAME (var));
+      break;
+
+    case LOC_BLOCK:
+      ax_const_l (ax, BLOCK_START (SYMBOL_BLOCK_VALUE (var)));
+      value->kind = axs_rvalue;
+      break;
+
+    case LOC_REGISTER:
+    case LOC_REGPARM:
+      /* Don't generate any code at all; in the process of treating
+         this as an lvalue or rvalue, the caller will generate the
+         right code.  */
+      value->kind = axs_lvalue_register;
+      value->u.reg = SYMBOL_VALUE (var);
+      break;
+
+      /* A lot like LOC_REF_ARG, but the pointer lives directly in a
+	 register, not on the stack.  Simpler than LOC_REGISTER and
+	 LOC_REGPARM, because it's just like any other case where the
+	 thing has a real address.  */
+    case LOC_REGPARM_ADDR:
+      ax_reg (ax, SYMBOL_VALUE (var));
+      value->kind = axs_lvalue_memory;
+      break;
+
+    case LOC_UNRESOLVED:
+      {
+	struct minimal_symbol *msym 
+	  = lookup_minimal_symbol (SYMBOL_NAME (var), NULL, NULL);
+	if (! msym)
+	  error ("Couldn't resolve symbol `%s'.", SYMBOL_SOURCE_NAME (var));
+	
+	/* Push the address of the variable.  */
+	ax_const_l (ax, SYMBOL_VALUE_ADDRESS (msym));
+	value->kind = axs_lvalue_memory;
+      }
+    break;
+
+    case LOC_OPTIMIZED_OUT:
+      error ("The variable `%s' has been optimized out.",
+	     SYMBOL_SOURCE_NAME (var));
+      break;
+
+    default:
+      error ("Cannot find value of botched symbol `%s'.",
+	     SYMBOL_SOURCE_NAME (var));
+      break;
+    }
+}
+
+
+
+/* Generating bytecode from GDB expressions: literals */
+
+static void
+gen_int_literal (ax, value, k, type)
+     struct agent_expr *ax;
+     struct axs_value *value;
+     LONGEST k;
+     struct type *type;
+{
+  ax_const_l (ax, k);
+  value->kind = axs_rvalue;
+  value->type = type;
+}
+
+
+
+/* Generating bytecode from GDB expressions: unary conversions, casts */
+
+/* Take what's on the top of the stack (as described by VALUE), and
+   try to make an rvalue out of it.  Signal an error if we can't do
+   that.  */
+static void
+require_rvalue (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  switch (value->kind)
+    {
+    case axs_rvalue:
+      /* It's already an rvalue.  */
+      break;
+
+    case axs_lvalue_memory:
+      /* The top of stack is the address of the object.  Dereference.  */
+      gen_fetch (ax, value->type);
+      break;
+
+    case axs_lvalue_register:
+      /* There's nothing on the stack, but value->u.reg is the
+         register number containing the value.
+
+	 When we add floating-point support, this is going to have to
+	 change.  What about SPARC register pairs, for example?  */
+      ax_reg (ax, value->u.reg);
+      gen_extend (ax, value->type);
+      break;
+    }
+
+  value->kind = axs_rvalue;
+}
+
+
+/* Assume the top of the stack is described by VALUE, and perform the
+   usual unary conversions.  This is motivated by ANSI 6.2.2, but of
+   course GDB expressions are not ANSI; they're the mishmash union of
+   a bunch of languages.  Rah.
+
+   NOTE!  This function promises to produce an rvalue only when the
+   incoming value is of an appropriate type.  In other words, the
+   consumer of the value this function produces may assume the value
+   is an rvalue only after checking its type.
+
+   The immediate issue is that if the user tries to use a structure or
+   union as an operand of, say, the `+' operator, we don't want to try
+   to convert that structure to an rvalue; require_rvalue will bomb on
+   structs and unions.  Rather, we want to simply pass the struct
+   lvalue through unchanged, and let `+' raise an error.  */
+
+static void
+gen_usual_unary (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  /* We don't have to generate any code for the usual integral
+     conversions, since values are always represented as full-width on
+     the stack.  Should we tweak the type?  */
+
+  /* Some types require special handling.  */
+  switch (value->type->code)
+    {
+      /* Functions get converted to a pointer to the function.  */
+    case TYPE_CODE_FUNC:
+      value->type = lookup_pointer_type (value->type);
+      value->kind = axs_rvalue;	/* Should always be true, but just in case.  */
+      break;
+
+      /* Arrays get converted to a pointer to their first element, and
+	 are no longer an lvalue.  */
+    case TYPE_CODE_ARRAY:
+      {
+	struct type *elements = TYPE_TARGET_TYPE (value->type);
+	value->type = lookup_pointer_type (elements);
+	value->kind = axs_rvalue;
+	/* We don't need to generate any code; the address of the array
+	   is also the address of its first element.  */
+      }
+    break;
+
+    /* Don't try to convert structures and unions to rvalues.  Let the
+       consumer signal an error.  */
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+      return;
+
+      /* If the value is an enum, call it an integer.  */
+    case TYPE_CODE_ENUM:
+      value->type = builtin_type_int;
+      break;
+    }
+
+  /* If the value is an lvalue, dereference it.  */
+  require_rvalue (ax, value);
+}
+
+
+/* Return non-zero iff the type TYPE1 is considered "wider" than the
+   type TYPE2, according to the rules described in gen_usual_arithmetic.  */
+static int
+type_wider_than (type1, type2)
+     struct type *type1, *type2;
+{
+  return (TYPE_LENGTH (type1) > TYPE_LENGTH (type2)
+	  || (TYPE_LENGTH (type1) == TYPE_LENGTH (type2)
+	      && TYPE_UNSIGNED (type1)
+	      && ! TYPE_UNSIGNED (type2)));
+}
+
+
+/* Return the "wider" of the two types TYPE1 and TYPE2.  */
+static struct type *
+max_type (type1, type2)
+     struct type *type1, *type2;
+{
+  return type_wider_than (type1, type2) ? type1 : type2;
+}
+
+
+/* Generate code to convert a scalar value of type FROM to type TO.  */
+static void
+gen_conversion (ax, from, to)
+     struct agent_expr *ax;
+     struct type *from, *to;
+{
+  /* Perhaps there is a more graceful way to state these rules.  */
+
+  /* If we're converting to a narrower type, then we need to clear out
+     the upper bits.  */
+  if (TYPE_LENGTH (to) < TYPE_LENGTH (from))
+    gen_extend (ax, from);
+
+  /* If the two values have equal width, but different signednesses,
+     then we need to extend.  */
+  else if (TYPE_LENGTH (to) == TYPE_LENGTH (from))
+    {
+      if (TYPE_UNSIGNED (from) != TYPE_UNSIGNED (to))
+	gen_extend (ax, to);
+    }
+
+  /* If we're converting to a wider type, and becoming unsigned, then
+     we need to zero out any possible sign bits.  */
+  else if (TYPE_LENGTH (to) > TYPE_LENGTH (from))
+    {
+      if (TYPE_UNSIGNED (to))
+	gen_extend (ax, to);
+    }
+}
+
+
+/* Return non-zero iff the type FROM will require any bytecodes to be
+   emitted to be converted to the type TO.  */
+static int
+is_nontrivial_conversion (from, to)
+     struct type *from, *to;
+{
+  struct agent_expr *ax = new_agent_expr (0);
+  int nontrivial;
+
+  /* Actually generate the code, and see if anything came out.  At the
+     moment, it would be trivial to replicate the code in
+     gen_conversion here, but in the future, when we're supporting
+     floating point and the like, it may not be.  Doing things this
+     way allows this function to be independent of the logic in
+     gen_conversion.  */
+  gen_conversion (ax, from, to);
+  nontrivial = ax->len > 0;
+  free_agent_expr (ax);
+  return nontrivial;
+}
+
+
+/* Generate code to perform the "usual arithmetic conversions" (ANSI C
+   6.2.1.5) for the two operands of an arithmetic operator.  This
+   effectively finds a "least upper bound" type for the two arguments,
+   and promotes each argument to that type.  *VALUE1 and *VALUE2
+   describe the values as they are passed in, and as they are left.  */
+static void
+gen_usual_arithmetic (ax, value1, value2)
+     struct agent_expr *ax;
+     struct axs_value *value1, *value2;
+{
+  /* Do the usual binary conversions.  */
+  if (TYPE_CODE (value1->type) == TYPE_CODE_INT
+      && TYPE_CODE (value2->type) == TYPE_CODE_INT)
+    {
+      /* The ANSI integral promotions seem to work this way: Order the
+	 integer types by size, and then by signedness: an n-bit
+	 unsigned type is considered "wider" than an n-bit signed
+	 type.  Promote to the "wider" of the two types, and always
+	 promote at least to int.  */
+      struct type *target = max_type (builtin_type_int,
+				      max_type (value1->type, value2->type));
+
+      /* Deal with value2, on the top of the stack.  */
+      gen_conversion (ax, value2->type, target);
+
+      /* Deal with value1, not on the top of the stack.  Don't
+         generate the `swap' instructions if we're not actually going
+         to do anything.  */
+      if (is_nontrivial_conversion (value1->type, target))
+	{
+	  ax_simple (ax, aop_swap);
+	  gen_conversion (ax, value1->type, target);
+	  ax_simple (ax, aop_swap);
+	}
+
+      value1->type = value2->type = target;
+    }
+}
+
+
+/* Generate code to perform the integral promotions (ANSI 6.2.1.1) on
+   the value on the top of the stack, as described by VALUE.  Assume
+   the value has integral type.  */
+static void
+gen_integral_promotions (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  if (! type_wider_than (value->type, builtin_type_int))
+    {
+      gen_conversion (ax, value->type, builtin_type_int);
+      value->type = builtin_type_int;
+    }
+  else if (! type_wider_than (value->type, builtin_type_unsigned_int))
+    {
+      gen_conversion (ax, value->type, builtin_type_unsigned_int);
+      value->type = builtin_type_unsigned_int;
+    }
+}
+
+
+/* Generate code for a cast to TYPE.  */
+static void
+gen_cast (ax, value, type)
+     struct agent_expr *ax;
+     struct axs_value *value;
+     struct type *type;
+{
+  /* GCC does allow casts to yield lvalues, so this should be fixed
+     before merging these changes into the trunk.  */
+  require_rvalue (ax, value);
+  /* Dereference typedefs. */
+  type = check_typedef (type);
+
+  switch (type->code)
+    {
+    case TYPE_CODE_PTR:
+      /* It's implementation-defined, and I'll bet this is what GCC
+         does.  */
+      break;
+
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_FUNC:
+      error ("Illegal type cast: intended type must be scalar.");
+
+    case TYPE_CODE_ENUM:
+      /* We don't have to worry about the size of the value, because
+         all our integral values are fully sign-extended, and when
+         casting pointers we can do anything we like.  Is there any
+         way for us to actually know what GCC actually does with a
+         cast like this?  */
+      value->type = type;
+      break;
+      
+    case TYPE_CODE_INT:
+      gen_conversion (ax, value->type, type);
+      break;
+
+    case TYPE_CODE_VOID:
+      /* We could pop the value, and rely on everyone else to check
+	 the type and notice that this value doesn't occupy a stack
+	 slot.  But for now, leave the value on the stack, and
+	 preserve the "value == stack element" assumption.  */
+      break;
+
+    default:
+      error ("Casts to requested type are not yet implemented.");
+    }
+
+  value->type = type;
+}
+
+
+
+/* Generating bytecode from GDB expressions: arithmetic */
+
+/* Scale the integer on the top of the stack by the size of the target
+   of the pointer type TYPE.  */
+static void
+gen_scale (ax, op, type)
+     struct agent_expr *ax;
+     enum agent_op op;
+     struct type *type;
+{
+  struct type *element = TYPE_TARGET_TYPE (type);
+
+  if (element->length != 1)
+    {
+      ax_const_l (ax, element->length);
+      ax_simple (ax, op);
+    }
+}
+
+
+/* Generate code for an addition; non-trivial because we deal with
+   pointer arithmetic.  We set VALUE to describe the result value; we
+   assume VALUE1 and VALUE2 describe the two operands, and that
+   they've undergone the usual binary conversions.  Used by both
+   BINOP_ADD and BINOP_SUBSCRIPT.  NAME is used in error messages.  */
+static void
+gen_add (ax, value, value1, value2, name)
+     struct agent_expr *ax;
+     struct axs_value *value, *value1, *value2;
+     char *name;
+{
+  /* Is it INT+PTR?  */
+  if (value1->type->code == TYPE_CODE_INT
+      && value2->type->code == TYPE_CODE_PTR)
+    {
+      /* Swap the values and proceed normally.  */
+      ax_simple (ax, aop_swap);
+      gen_scale (ax, aop_mul, value2->type);
+      ax_simple (ax, aop_add);
+      gen_extend (ax, value2->type); /* Catch overflow.  */
+      value->type = value2->type;
+    }
+
+  /* Is it PTR+INT?  */
+  else if (value1->type->code == TYPE_CODE_PTR
+	   && value2->type->code == TYPE_CODE_INT)
+    {
+      gen_scale (ax, aop_mul, value1->type);
+      ax_simple (ax, aop_add);
+      gen_extend (ax, value1->type); /* Catch overflow.  */
+      value->type = value1->type;
+    }
+
+  /* Must be number + number; the usual binary conversions will have
+     brought them both to the same width.  */
+  else if (value1->type->code == TYPE_CODE_INT
+	   && value2->type->code == TYPE_CODE_INT)
+    {
+      ax_simple (ax, aop_add);
+      gen_extend (ax, value1->type); /* Catch overflow.  */
+      value->type = value1->type;
+    }
+
+  else
+    error ("Illegal combination of types in %s.", name);
+
+  value->kind = axs_rvalue;
+}
+
+
+/* Generate code for an addition; non-trivial because we have to deal
+   with pointer arithmetic.  We set VALUE to describe the result
+   value; we assume VALUE1 and VALUE2 describe the two operands, and
+   that they've undergone the usual binary conversions.  */
+static void
+gen_sub (ax, value, value1, value2)
+     struct agent_expr *ax;
+     struct axs_value *value, *value1, *value2;
+{
+  struct type *element;
+
+  if (value1->type->code == TYPE_CODE_PTR)
+    {
+      /* Is it PTR - INT?  */
+      if (value2->type->code == TYPE_CODE_INT)
+	{
+	  gen_scale (ax, aop_mul, value1->type);
+	  ax_simple (ax, aop_sub);
+	  gen_extend (ax, value1->type); /* Catch overflow.  */
+	  value->type = value1->type;
+	}
+
+      /* Is it PTR - PTR?  Strictly speaking, the types ought to
+	 match, but this is what the normal GDB expression evaluator
+	 tests for.  */
+      else if (value2->type->code == TYPE_CODE_PTR
+	       && (TYPE_LENGTH (TYPE_TARGET_TYPE (value1->type))
+		   == TYPE_LENGTH (TYPE_TARGET_TYPE (value2->type))))
+	{
+	  ax_simple (ax, aop_sub);
+	  gen_scale (ax, aop_div_unsigned, value1->type);
+	  value->type = builtin_type_long; /* FIXME --- should be ptrdiff_t */
+	}
+      else
+	error ("\
+First argument of `-' is a pointer, but second argument is neither\n\
+an integer nor a pointer of the same type.");
+    }
+
+  /* Must be number + number.  */
+  else if (value1->type->code == TYPE_CODE_INT
+	   && value2->type->code == TYPE_CODE_INT)
+    {
+      ax_simple (ax, aop_sub);
+      gen_extend (ax, value1->type); /* Catch overflow.  */
+      value->type = value1->type;
+    }
+  
+  else
+    error ("Illegal combination of types in subtraction.");
+
+  value->kind = axs_rvalue;
+}
+
+/* Generate code for a binary operator that doesn't do pointer magic.
+   We set VALUE to describe the result value; we assume VALUE1 and
+   VALUE2 describe the two operands, and that they've undergone the
+   usual binary conversions.  MAY_CARRY should be non-zero iff the
+   result needs to be extended.  NAME is the English name of the
+   operator, used in error messages */
+static void
+gen_binop (ax, value, value1, value2, op, op_unsigned, may_carry, name)
+     struct agent_expr *ax;
+     struct axs_value *value, *value1, *value2;
+     enum agent_op op, op_unsigned;
+     int may_carry;
+     char *name;
+{
+  /* We only handle INT op INT.  */
+  if ((value1->type->code != TYPE_CODE_INT)
+      || (value2->type->code != TYPE_CODE_INT))
+    error ("Illegal combination of types in %s.", name);
+  
+  ax_simple (ax,
+	     TYPE_UNSIGNED (value1->type) ? op_unsigned : op);
+  if (may_carry)
+    gen_extend (ax, value1->type); /* catch overflow */
+  value->type = value1->type;
+  value->kind = axs_rvalue;
+}
+
+
+static void
+gen_logical_not (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  if (TYPE_CODE (value->type) != TYPE_CODE_INT
+      && TYPE_CODE (value->type) != TYPE_CODE_PTR)
+    error ("Illegal type of operand to `!'.");
+
+  gen_usual_unary (ax, value);
+  ax_simple (ax, aop_log_not);
+  value->type = builtin_type_int;
+}
+
+
+static void
+gen_complement (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  if (TYPE_CODE (value->type) != TYPE_CODE_INT)
+    error ("Illegal type of operand to `~'.");
+
+  gen_usual_unary (ax, value);
+  gen_integral_promotions (ax, value);
+  ax_simple (ax, aop_bit_not);
+  gen_extend (ax, value->type);
+}
+
+
+
+/* Generating bytecode from GDB expressions: * & . -> @ sizeof */
+
+/* Dereference the value on the top of the stack.  */
+static void
+gen_deref (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  /* The caller should check the type, because several operators use
+     this, and we don't know what error message to generate.  */
+  if (value->type->code != TYPE_CODE_PTR)
+    error ("GDB bug: ax-gdb.c (gen_deref): expected a pointer");
+
+  /* We've got an rvalue now, which is a pointer.  We want to yield an
+     lvalue, whose address is exactly that pointer.  So we don't
+     actually emit any code; we just change the type from "Pointer to
+     T" to "T", and mark the value as an lvalue in memory.  Leave it
+     to the consumer to actually dereference it.  */
+  value->type = check_typedef (TYPE_TARGET_TYPE (value->type));
+  value->kind = ((value->type->code == TYPE_CODE_FUNC)
+		 ? axs_rvalue : axs_lvalue_memory);
+}
+
+
+/* Produce the address of the lvalue on the top of the stack.  */
+static void
+gen_address_of (ax, value)
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  /* Special case for taking the address of a function.  The ANSI
+     standard describes this as a special case, too, so this
+     arrangement is not without motivation.  */
+  if (value->type->code == TYPE_CODE_FUNC)
+    /* The value's already an rvalue on the stack, so we just need to
+       change the type.  */
+    value->type = lookup_pointer_type (value->type);
+  else
+    switch (value->kind)
+      {
+      case axs_rvalue:
+	error ("Operand of `&' is an rvalue, which has no address.");
+
+      case axs_lvalue_register:
+	error ("Operand of `&' is in a register, and has no address.");
+
+      case axs_lvalue_memory:
+	value->kind = axs_rvalue;
+	value->type = lookup_pointer_type (value->type);
+	break;
+      }
+}
+
+
+/* A lot of this stuff will have to change to support C++.  But we're
+   not going to deal with that at the moment.  */
+
+/* Find the field in the structure type TYPE named NAME, and return
+   its index in TYPE's field array.  */
+static int
+find_field (type, name)
+     struct type *type;
+     char *name;
+{
+  int i;
+
+  CHECK_TYPEDEF (type);
+
+  /* Make sure this isn't C++.  */
+  if (TYPE_N_BASECLASSES (type) != 0)
+    error ("GDB bug: ax-gdb.c (find_field): derived classes supported");
+
+  for (i = 0; i < TYPE_NFIELDS (type); i++)
+    {
+      char *this_name = TYPE_FIELD_NAME (type, i);
+
+      if (this_name && STREQ (name, this_name))
+	return i;
+
+      if (this_name[0] == '\0')
+	error ("GDB bug: ax-gdb.c (find_field): anonymous unions not supported");
+    }
+
+  error ("Couldn't find member named `%s' in struct/union `%s'",
+	 name, type->tag_name);
+
+  return 0;
+}
+
+
+/* Generate code to push the value of a bitfield of a structure whose
+   address is on the top of the stack.  START and END give the
+   starting and one-past-ending *bit* numbers of the field within the
+   structure.  */
+static void
+gen_bitfield_ref (ax, value, type, start, end)
+     struct agent_expr *ax;
+     struct axs_value *value;
+     struct type *type;
+     int start, end;
+{
+  /* Note that ops[i] fetches 8 << i bits.  */
+  static enum agent_op ops[]
+    = { aop_ref8, aop_ref16, aop_ref32, aop_ref64 };
+  static int num_ops = (sizeof (ops) / sizeof (ops[0]));
+
+  /* We don't want to touch any byte that the bitfield doesn't
+     actually occupy; we shouldn't make any accesses we're not
+     explicitly permitted to.  We rely here on the fact that the
+     bytecode `ref' operators work on unaligned addresses.
+
+     It takes some fancy footwork to get the stack to work the way
+     we'd like.  Say we're retrieving a bitfield that requires three
+     fetches.  Initially, the stack just contains the address:
+		addr
+     For the first fetch, we duplicate the address
+		addr addr
+     then add the byte offset, do the fetch, and shift and mask as
+     needed, yielding a fragment of the value, properly aligned for
+     the final bitwise or:
+                addr frag1
+     then we swap, and repeat the process:
+                frag1 addr                    --- address on top
+		frag1 addr addr               --- duplicate it
+                frag1 addr frag2              --- get second fragment
+                frag1 frag2 addr              --- swap again
+                frag1 frag2 frag3             --- get third fragment
+     Notice that, since the third fragment is the last one, we don't
+     bother duplicating the address this time.  Now we have all the
+     fragments on the stack, and we can simply `or' them together,
+     yielding the final value of the bitfield.  */
+
+  /* The first and one-after-last bits in the field, but rounded down
+     and up to byte boundaries.  */
+  int bound_start = (start / TARGET_CHAR_BIT) * TARGET_CHAR_BIT;
+  int bound_end   = (((end + TARGET_CHAR_BIT - 1)
+		      / TARGET_CHAR_BIT)
+		     * TARGET_CHAR_BIT);
+
+  /* current bit offset within the structure */
+  int offset;
+
+  /* The index in ops of the opcode we're considering.  */
+  int op;
+
+  /* The number of fragments we generated in the process.  Probably
+     equal to the number of `one' bits in bytesize, but who cares?  */
+  int fragment_count;
+
+  /* Dereference any typedefs. */
+  type = check_typedef (type);
+
+  /* Can we fetch the number of bits requested at all?  */
+  if ((end - start) > ((1 << num_ops) * 8))
+    error ("GDB bug: ax-gdb.c (gen_bitfield_ref): bitfield too wide");
+
+  /* Note that we know here that we only need to try each opcode once.
+     That may not be true on machines with weird byte sizes.  */
+  offset = bound_start;
+  fragment_count = 0;
+  for (op = num_ops - 1; op >= 0; op--)
+    {
+      /* number of bits that ops[op] would fetch */
+      int op_size = 8 << op;
+
+      /* The stack at this point, from bottom to top, contains zero or
+	 more fragments, then the address.  */
+      
+      /* Does this fetch fit within the bitfield?  */
+      if (offset + op_size <= bound_end)
+	{
+	  /* Is this the last fragment?  */
+	  int last_frag = (offset + op_size == bound_end);
+
+	  if (! last_frag)
+	    ax_simple (ax, aop_dup); /* keep a copy of the address */
+	  
+	  /* Add the offset.  */
+	  gen_offset (ax, offset / TARGET_CHAR_BIT);
+
+	  if (trace_kludge)
+	    {
+	      /* Record the area of memory we're about to fetch.  */
+	      ax_trace_quick (ax, op_size / TARGET_CHAR_BIT);
+	    }
+
+	  /* Perform the fetch.  */
+	  ax_simple (ax, ops[op]);
+	
+          /* Shift the bits we have to their proper position.
+	     gen_left_shift will generate right shifts when the operand
+	     is negative.
+
+             A big-endian field diagram to ponder:
+              byte 0  byte 1  byte 2  byte 3  byte 4  byte 5  byte 6  byte 7
+             +------++------++------++------++------++------++------++------+
+             xxxxAAAAAAAAAAAAAAAAAAAAAAAAAAAABBBBBBBBBBBBBBBBCCCCCxxxxxxxxxxx
+                             ^               ^               ^    ^
+             bit number      16              32              48   53
+	     These are bit numbers as supplied by GDB.  Note that the
+	     bit numbers run from right to left once you've fetched the
+	     value!
+
+             A little-endian field diagram to ponder:
+              byte 7  byte 6  byte 5  byte 4  byte 3  byte 2  byte 1  byte 0
+             +------++------++------++------++------++------++------++------+
+             xxxxxxxxxxxAAAAABBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCCCCCCCCCCCxxxx
+                            ^               ^               ^           ^   ^
+             bit number     48              32              16          4   0
+
+             In both cases, the most significant end is on the left
+             (i.e. normal numeric writing order), which means that you
+             don't go crazy thinking about `left' and `right' shifts.
+
+             We don't have to worry about masking yet:
+             - If they contain garbage off the least significant end, then we
+               must be looking at the low end of the field, and the right
+               shift will wipe them out.
+             - If they contain garbage off the most significant end, then we
+               must be looking at the most significant end of the word, and
+               the sign/zero extension will wipe them out.
+             - If we're in the interior of the word, then there is no garbage
+               on either end, because the ref operators zero-extend.  */
+	  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	    gen_left_shift (ax, end - (offset + op_size));
+	  else 
+	    gen_left_shift (ax, offset - start);
+
+	  if (! last_frag)
+	    /* Bring the copy of the address up to the top.  */
+	    ax_simple (ax, aop_swap);
+
+	  offset += op_size;
+	  fragment_count++;
+	}
+    }
+
+  /* Generate enough bitwise `or' operations to combine all the
+     fragments we left on the stack.  */
+  while (fragment_count-- > 1)
+    ax_simple (ax, aop_bit_or);
+
+  /* Sign- or zero-extend the value as appropriate.  */
+  ((TYPE_UNSIGNED (type) ? ax_zero_ext : ax_ext) (ax, end - start));
+
+  /* This is *not* an lvalue.  Ugh.  */
+  value->kind = axs_rvalue;
+  value->type = type;
+}
+
+
+/* Generate code to reference the member named FIELD of a structure or
+   union.  The top of the stack, as described by VALUE, should have
+   type (pointer to a)* struct/union.  OPERATOR_NAME is the name of
+   the operator being compiled, and OPERAND_NAME is the kind of thing
+   it operates on; we use them in error messages.  */
+static void
+gen_struct_ref (ax, value, field, operator_name, operand_name)
+     struct agent_expr *ax;
+     struct axs_value *value;
+     char *field;
+     char *operator_name;
+     char *operand_name;
+{
+  struct type *type;
+  int i;
+
+  /* Follow pointers until we reach a non-pointer.  These aren't the C
+     semantics, but they're what the normal GDB evaluator does, so we
+     should at least be consistent.  */
+  while (value->type->code == TYPE_CODE_PTR)
+    {
+      gen_usual_unary (ax, value);
+      gen_deref (ax, value);
+    }
+  type = value->type;
+
+  /* This must yield a structure or a union.  */
+  if (TYPE_CODE (type) != TYPE_CODE_STRUCT
+      && TYPE_CODE (type) != TYPE_CODE_UNION)
+    error ("The left operand of `%s' is not a %s.",
+	   operator_name, operand_name);
+
+  /* And it must be in memory; we don't deal with structure rvalues,
+     or structures living in registers.  */
+  if (value->kind != axs_lvalue_memory)
+    error ("Structure does not live in memory.");
+
+  i = find_field (type, field);
+  
+  /* Is this a bitfield?  */
+  if (TYPE_FIELD_PACKED (type, i))
+    gen_bitfield_ref (ax, value, TYPE_FIELD_TYPE (type, i),
+		      TYPE_FIELD_BITPOS (type, i),
+		      (TYPE_FIELD_BITPOS (type, i)
+		       + TYPE_FIELD_BITSIZE (type, i)));
+  else
+    {
+      gen_offset (ax, TYPE_FIELD_BITPOS (type, i) / TARGET_CHAR_BIT);
+      value->kind = axs_lvalue_memory;
+      value->type = TYPE_FIELD_TYPE (type, i);
+    }
+}
+
+
+/* Generate code for GDB's magical `repeat' operator.  
+   LVALUE @ INT creates an array INT elements long, and whose elements
+   have the same type as LVALUE, located in memory so that LVALUE is
+   its first element.  For example, argv[0]@argc gives you the array
+   of command-line arguments.
+
+   Unfortunately, because we have to know the types before we actually
+   have a value for the expression, we can't implement this perfectly
+   without changing the type system, having values that occupy two
+   stack slots, doing weird things with sizeof, etc.  So we require
+   the right operand to be a constant expression.  */
+static void
+gen_repeat (pc, ax, value)
+     union exp_element **pc;
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  struct axs_value value1;
+  /* We don't want to turn this into an rvalue, so no conversions
+     here.  */
+  gen_expr (pc, ax, &value1);
+  if (value1.kind != axs_lvalue_memory)
+    error ("Left operand of `@' must be an object in memory.");
+
+  /* Evaluate the length; it had better be a constant.  */
+  {
+    struct value *v = const_expr (pc);
+    int length;
+
+    if (! v)
+      error ("Right operand of `@' must be a constant, in agent expressions.");
+    if (v->type->code != TYPE_CODE_INT)
+      error ("Right operand of `@' must be an integer.");
+    length = value_as_long (v);
+    if (length <= 0)
+      error ("Right operand of `@' must be positive.");
+
+    /* The top of the stack is already the address of the object, so
+       all we need to do is frob the type of the lvalue.  */
+    {
+      /* FIXME-type-allocation: need a way to free this type when we are
+	 done with it.  */
+      struct type *range
+	= create_range_type (0, builtin_type_int, 0, length - 1);
+      struct type *array = create_array_type (0, value1.type, range);
+
+      value->kind = axs_lvalue_memory;
+      value->type = array;
+    }
+  }
+}
+
+
+/* Emit code for the `sizeof' operator.
+   *PC should point at the start of the operand expression; we advance it
+   to the first instruction after the operand.  */
+static void
+gen_sizeof (pc, ax, value)
+     union exp_element **pc;
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  /* We don't care about the value of the operand expression; we only
+     care about its type.  However, in the current arrangement, the
+     only way to find an expression's type is to generate code for it.
+     So we generate code for the operand, and then throw it away,
+     replacing it with code that simply pushes its size.  */
+  int start = ax->len;
+  gen_expr (pc, ax, value);
+
+  /* Throw away the code we just generated.  */
+  ax->len = start;
+  
+  ax_const_l (ax, TYPE_LENGTH (value->type));
+  value->kind = axs_rvalue;
+  value->type = builtin_type_int;
+}
+
+
+/* Generating bytecode from GDB expressions: general recursive thingy  */
+
+/* A gen_expr function written by a Gen-X'er guy.
+   Append code for the subexpression of EXPR starting at *POS_P to AX.  */
+static void
+gen_expr (pc, ax, value)
+     union exp_element **pc;
+     struct agent_expr *ax;
+     struct axs_value *value;
+{
+  /* Used to hold the descriptions of operand expressions.  */
+  struct axs_value value1, value2;
+  enum exp_opcode op = (*pc)[0].opcode;
+
+  /* If we're looking at a constant expression, just push its value.  */
+  {
+    struct value *v = maybe_const_expr (pc);
+    
+    if (v)
+      {
+	ax_const_l (ax, value_as_long (v));
+	value->kind = axs_rvalue;
+	value->type = check_typedef (VALUE_TYPE (v));
+	return;
+      }
+  }
+
+  /* Otherwise, go ahead and generate code for it.  */
+  switch (op)
+    {
+      /* Binary arithmetic operators.  */
+    case BINOP_ADD:
+    case BINOP_SUB:
+    case BINOP_MUL:
+    case BINOP_DIV:
+    case BINOP_REM:
+    case BINOP_SUBSCRIPT:
+    case BINOP_BITWISE_AND:
+    case BINOP_BITWISE_IOR:
+    case BINOP_BITWISE_XOR:
+      (*pc)++;
+      gen_expr (pc, ax, &value1);
+      gen_usual_unary (ax, &value1);
+      gen_expr (pc, ax, &value2);
+      gen_usual_unary (ax, &value2);
+      gen_usual_arithmetic (ax, &value1, &value2);
+      switch (op)
+	{
+	case BINOP_ADD:
+	  gen_add (ax, value, &value1, &value2, "addition");
+	  break;
+	case BINOP_SUB:
+	  gen_sub (ax, value, &value1, &value2);
+	  break;
+	case BINOP_MUL:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_mul, aop_mul, 1, "multiplication");
+	  break;
+	case BINOP_DIV:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_div_signed, aop_div_unsigned, 1, "division");
+	  break;
+	case BINOP_REM:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_rem_signed, aop_rem_unsigned, 1, "remainder");
+	  break;
+	case BINOP_SUBSCRIPT:
+	  gen_add (ax, value, &value1, &value2, "array subscripting");
+	  if (TYPE_CODE (value->type) != TYPE_CODE_PTR)
+	    error ("Illegal combination of types in array subscripting.");
+	  gen_deref (ax, value);
+	  break;
+	case BINOP_BITWISE_AND:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_bit_and, aop_bit_and, 0, "bitwise and");
+	  break;
+
+	case BINOP_BITWISE_IOR:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_bit_or, aop_bit_or, 0, "bitwise or");
+	  break;
+
+	case BINOP_BITWISE_XOR:
+	  gen_binop (ax, value, &value1, &value2,
+		     aop_bit_xor, aop_bit_xor, 0, "bitwise exclusive-or");
+	  break;
+
+	default:
+	  /* We should only list operators in the outer case statement
+             that we actually handle in the inner case statement.  */
+	  error ("GDB bug: ax-gdb.c (gen_expr): op case sets don't match");
+	}
+      break;
+
+      /* Note that we need to be a little subtle about generating code
+	 for comma.  In C, we can do some optimizations here because
+	 we know the left operand is only being evaluated for effect.
+	 However, if the tracing kludge is in effect, then we always
+	 need to evaluate the left hand side fully, so that all the
+	 variables it mentions get traced.  */
+    case BINOP_COMMA:
+      (*pc)++;
+      gen_expr (pc, ax, &value1);
+      /* Don't just dispose of the left operand.  We might be tracing,
+	 in which case we want to emit code to trace it if it's an
+	 lvalue.  */
+      gen_traced_pop (ax, &value1);
+      gen_expr (pc, ax, value);
+      /* It's the consumer's responsibility to trace the right operand.  */
+      break;
+      
+    case OP_LONG:		/* some integer constant */
+      {
+	struct type *type = (*pc)[1].type;
+	LONGEST k = (*pc)[2].longconst;
+	(*pc) += 4;
+	gen_int_literal (ax, value, k, type);
+      }
+    break;
+
+    case OP_VAR_VALUE:
+      gen_var_ref (ax, value, (*pc)[2].symbol);
+      (*pc) += 4;
+      break;
+
+    case OP_REGISTER:
+      {
+	int reg = (int) (*pc)[1].longconst;
+	(*pc) += 3;
+	value->kind = axs_lvalue_register;
+	value->u.reg = reg;
+	value->type = REGISTER_VIRTUAL_TYPE (reg);
+      }
+    break;
+
+    case OP_INTERNALVAR:
+      error ("GDB agent expressions cannot use convenience variables.");
+
+    /* Weirdo operator: see comments for gen_repeat for details.  */
+    case BINOP_REPEAT:
+      /* Note that gen_repeat handles its own argument evaluation.  */
+      (*pc)++;
+      gen_repeat (pc, ax, value);
+      break;
+
+    case UNOP_CAST:
+      {
+	struct type *type = (*pc)[1].type;
+	(*pc) += 3;
+	gen_expr (pc, ax, value);
+	gen_cast (ax, value, type);
+      }
+    break;
+
+    case UNOP_MEMVAL:
+      {
+	struct type *type = check_typedef ((*pc)[1].type);
+	(*pc) += 3;
+	gen_expr (pc, ax, value);
+	/* I'm not sure I understand UNOP_MEMVAL entirely.  I think
+	   it's just a hack for dealing with minsyms; you take some
+	   integer constant, pretend it's the address of an lvalue of
+	   the given type, and dereference it.  */
+	if (value->kind != axs_rvalue)
+	  /* This would be weird.  */
+	  error ("GDB bug: ax-gdb.c (gen_expr): OP_MEMVAL operand isn't an rvalue???");
+	value->type = type;
+	value->kind = axs_lvalue_memory;
+      }
+    break;
+
+    case UNOP_NEG:
+      (*pc)++;
+      /* -FOO is equivalent to 0 - FOO.  */
+      gen_int_literal (ax, &value1, (LONGEST) 0, builtin_type_int);
+      gen_usual_unary (ax, &value1); /* shouldn't do much */
+      gen_expr (pc, ax, &value2);
+      gen_usual_unary (ax, &value2);
+      gen_usual_arithmetic (ax, &value1, &value2);
+      gen_sub (ax, value, &value1, &value2);
+      break;
+
+    case UNOP_LOGICAL_NOT:
+      (*pc)++;
+      gen_expr (pc, ax, value);
+      gen_logical_not (ax, value);
+      break;
+
+    case UNOP_COMPLEMENT:
+      (*pc)++;
+      gen_expr (pc, ax, value);
+      gen_complement (ax, value);
+      break;
+
+    case UNOP_IND:
+      (*pc)++;
+      gen_expr (pc, ax, value);
+      gen_usual_unary (ax, value);
+      if (TYPE_CODE (value->type) != TYPE_CODE_PTR)
+	error ("Argument of unary `*' is not a pointer.");
+      gen_deref (ax, value);
+      break;
+
+    case UNOP_ADDR:
+      (*pc)++;
+      gen_expr (pc, ax, value);
+      gen_address_of (ax, value);
+      break;
+
+    case UNOP_SIZEOF:
+      (*pc)++;
+      /* Notice that gen_sizeof handles its own operand, unlike most
+	 of the other unary operator functions.  This is because we
+	 have to throw away the code we generate.  */
+      gen_sizeof (pc, ax, value);
+      break;
+
+    case STRUCTOP_STRUCT:
+    case STRUCTOP_PTR:
+      {
+	int length = (*pc)[1].longconst;
+	char *name = &(*pc)[2].string;
+
+	(*pc) += 4 + BYTES_TO_EXP_ELEM (length + 1);
+	gen_expr (pc, ax, value);
+	if (op == STRUCTOP_STRUCT)
+	  gen_struct_ref (ax, value, name, ".", "structure or union");
+	else if (op == STRUCTOP_PTR)
+	  gen_struct_ref (ax, value, name, "->",
+			  "pointer to a structure or union");
+	else
+	  /* If this `if' chain doesn't handle it, then the case list
+             shouldn't mention it, and we shouldn't be here.  */
+	  error ("GDB bug: ax-gdb.c (gen_expr): unhandled struct case");
+      }
+    break;
+
+    case OP_TYPE:
+      error ("Attempt to use a type name as an expression.");
+
+    default:
+      error ("Unsupported operator in expression.");
+    }
+}
+     
+
+
+#if 0  /* not used */
+/* Generating bytecode from GDB expressions: driver */
+
+/* Given a GDB expression EXPR, produce a string of agent bytecode
+   which computes its value.  Return the agent expression, and set
+   *VALUE to describe its type, and whether it's an lvalue or rvalue.  */
+struct agent_expr *
+expr_to_agent (expr, value)
+     struct expression *expr;
+     struct axs_value *value;
+{
+  struct cleanup *old_chain = 0;
+  struct agent_expr *ax = new_agent_expr ();
+  union exp_element *pc;
+
+  old_chain = make_cleanup ((make_cleanup_func) free_agent_expr, ax);
+
+  pc = expr->elts;
+  trace_kludge = 0;
+  gen_expr (&pc, ax, value);
+
+  /* We have successfully built the agent expr, so cancel the cleanup
+     request.  If we add more cleanups that we always want done, this
+     will have to get more complicated.  */
+  discard_cleanups (old_chain);
+  return ax;
+}
+
+
+/* Given a GDB expression EXPR denoting an lvalue in memory, produce a
+   string of agent bytecode which will leave its address and size on
+   the top of stack.  Return the agent expression.
+
+   Not sure this function is useful at all.  */
+struct agent_expr *
+expr_to_address_and_size (expr)
+     struct expression *expr;
+{
+  struct axs_value value;
+  struct agent_expr *ax = expr_to_agent (expr, &value);
+
+  /* Complain if the result is not a memory lvalue.  */
+  if (value.kind != axs_lvalue_memory)
+    {
+      free_agent_expr (ax);
+      error ("Expression does not denote an object in memory.");
+    }
+
+  /* Push the object's size on the stack.  */
+  ax_const_l (ax, TYPE_LENGTH (value.type));
+
+  return ax;
+}
+#endif /* 0 */
+
+/* Given a GDB expression EXPR, return bytecode to trace its value.
+   The result will use the `trace' and `trace_quick' bytecodes to
+   record the value of all memory touched by the expression.  The
+   caller can then use the ax_reqs function to discover which
+   registers it relies upon.  */
+struct agent_expr *
+gen_trace_for_expr (scope, expr)
+     CORE_ADDR scope;
+     struct expression *expr;
+{
+  struct cleanup *old_chain = 0;
+  struct agent_expr *ax = new_agent_expr (scope);
+  union exp_element *pc;
+  struct axs_value value;
+
+  old_chain = make_cleanup ((make_cleanup_func) free_agent_expr, ax);
+
+  pc = expr->elts;
+  trace_kludge = 1;
+  gen_expr (&pc, ax, &value);
+
+  /* Make sure we record the final object, and get rid of it.  */
+  gen_traced_pop (ax, &value);
+
+  /* Oh, and terminate.  */
+  ax_simple (ax, aop_end);
+
+  /* We have successfully built the agent expr, so cancel the cleanup
+     request.  If we add more cleanups that we always want done, this
+     will have to get more complicated.  */
+  discard_cleanups (old_chain);
+  return ax;
+}
+
+
+
+/* The "agent" command, for testing: compile and disassemble an expression.  */
+
+static void
+print_axs_value (f, value)
+     GDB_FILE *f;
+     struct axs_value *value;
+{
+  switch (value->kind)
+    {
+    case axs_rvalue:
+      fputs_filtered ("rvalue", f);
+      break;
+
+    case axs_lvalue_memory:
+      fputs_filtered ("memory lvalue", f);
+      break;
+
+    case axs_lvalue_register:
+      fprintf_filtered (f, "register %d lvalue", value->u.reg);
+      break;
+    }
+
+  fputs_filtered (" : ", f);
+  type_print (value->type, "", f, -1);
+}
+
+
+static void
+agent_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  struct cleanup *old_chain = 0;
+  struct expression *expr;
+  struct agent_expr *agent;
+  struct agent_reqs reqs;
+  struct frame_info *fi = get_current_frame ();	/* need current scope */
+
+  /* We don't deal with overlay debugging at the moment.  We need to
+     think more carefully about this.  If you copy this code into
+     another command, change the error message; the user shouldn't
+     have to know anything about agent expressions.  */
+  if (overlay_debugging)
+    error ("GDB can't do agent expression translation with overlays.");
+
+  if (exp == 0)
+    error_no_arg ("expression to translate");
+  
+  expr = parse_expression (exp);
+  old_chain = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+  agent = gen_trace_for_expr (fi->pc, expr);
+  make_cleanup ((make_cleanup_func) free_agent_expr, agent);
+  ax_print (gdb_stdout, agent);
+  ax_reqs (agent, &reqs);
+
+  do_cleanups (old_chain);
+  dont_repeat ();
+}
+
+
+/* Initialization code.  */
+
+void _initialize_ax_gdb PARAMS ((void));
+void
+_initialize_ax_gdb ()
+{
+  struct cmd_list_element *c;
+
+  add_cmd ("agent", class_maintenance, agent_command,
+	   "Translate an expression into remote agent bytecode.",
+	   &maintenancelist);
+}
diff --git a/gdb/ax-gdb.h b/gdb/ax-gdb.h
new file mode 100644
index 0000000..bca70d6
--- /dev/null
+++ b/gdb/ax-gdb.h
@@ -0,0 +1,111 @@
+/* GDB-specific functions for operating on agent expressions
+   Copyright 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* $Id$ */
+
+#ifndef AX_GDB_H
+#define AX_GDB_H
+
+
+/* Types and enums */
+
+/* GDB stores expressions in the form of a flattened tree (struct
+   expression), so we just walk that tree and generate agent bytecodes
+   as we go along.
+
+   GDB's normal evaluation uses struct value, which contains the
+   expression's value as well as its address or the register it came
+   from.  The `+' operator uses the value, whereas the unary `&'
+   operator will use the address portion.  The `=' operator will use
+   the address or register number of its left hand side.
+
+   The issues are different when generating agent bytecode.  Given a
+   variable reference expression, we should not necessarily generate
+   code to fetch its value, because the next operator may be `=' or
+   unary `&'.  Instead, when we recurse on a subexpression, we
+   indicate whether we want that expression to produce an lvalue or an
+   rvalue.  If we requested an lvalue, then the recursive call tells
+   us whether it generated code to compute an address on the stack, or
+   whether the lvalue lives in a register.
+
+   The `axs' prefix here means `agent expression, static', because
+   this is all static analysis of the expression, i.e. analysis which
+   doesn't depend on the contents of memory and registers.  */
+
+
+/* Different kinds of agent expression static values.  */
+enum axs_lvalue_kind {
+  /* We generated code to compute the subexpression's value.
+     Constants and arithmetic operators yield this.  */
+  axs_rvalue,
+
+  /* We generated code to yield the subexpression's value's address on
+     the top of the stack.  If the caller needs an rvalue, it should
+     call require_rvalue to produce the rvalue from this address.  */
+  axs_lvalue_memory,
+
+  /* We didn't generate any code, and the stack is undisturbed,
+     because the subexpression's value lives in a register; u.reg is
+     the register number.  If the caller needs an rvalue, it should
+     call require_rvalue to produce the rvalue from this register
+     number.  */
+  axs_lvalue_register
+};
+
+/* Structure describing what we got from a subexpression.  Think of
+   this as parallel to value.h's enum lval_type, except that we're
+   describing a value which will exist when the expression is
+   evaluated in the future, not a value we have in our hand.  */
+struct axs_value {
+  enum axs_lvalue_kind kind;	/* see above */
+
+  /* The type of the subexpression.  Even if lvalue == axs_lvalue_memory,
+     this is the type of the value itself; the value on the stack is a
+     "pointer to" an object of this type. */
+  struct type *type;
+
+  union {
+    /* if kind == axs_lvalue_register, this is the register number */
+    int reg;
+  } u;
+};
+
+
+/* Translating GDB expressions into agent expressions.  */
+
+/* Given a GDB expression EXPR, translate it into the agent bytecode,
+   and return it.  FLAGS are from enum expr_to_agent_flags.  */
+extern struct agent_expr *expr_to_agent PARAMS ((struct expression *EXPR,
+						 struct axs_value *VALUE));
+
+/* Given a GDB expression EXPR denoting an lvalue in memory, produce a
+   string of agent bytecode which will leave its address and size on
+   the top of stack.  Return the agent expression.  */
+extern struct agent_expr *expr_to_address_and_size
+			  PARAMS ((struct expression *EXPR));
+
+/* Given a GDB expression EXPR, return bytecode to trace its value.
+   The result will use the `trace' and `trace_quick' bytecodes to
+   record the value of all memory touched by the expression, and leave
+   no values on the stack.  The caller can then use the ax_reqs
+   function to discover which registers the expression uses.  */
+extern struct agent_expr *gen_trace_for_expr PARAMS ((CORE_ADDR, 
+						      struct expression *));
+
+#endif /* AX_GDB_H */
diff --git a/gdb/ax-general.c b/gdb/ax-general.c
new file mode 100644
index 0000000..76e9bb4
--- /dev/null
+++ b/gdb/ax-general.c
@@ -0,0 +1,552 @@
+/* Functions for manipulating expressions designed to be executed on the agent
+   Copyright 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* $Id$ */
+
+/* Despite what the above comment says about this file being part of
+   GDB, we would like to keep these functions free of GDB
+   dependencies, since we want to be able to use them in contexts
+   outside of GDB (test suites, the stub, etc.)  */
+
+#include "defs.h"
+#include "ax.h"
+
+
+/* Functions for building expressions.  */
+
+/* Allocate a new, empty agent expression.  */
+struct agent_expr *
+new_agent_expr (scope)
+     CORE_ADDR scope;
+{
+  struct agent_expr *x = xmalloc (sizeof (*x));
+  x->len  = 0;
+  x->size = 1;			/* Change this to a larger value once
+				   reallocation code is tested.  */
+  x->buf   = xmalloc (x->size);
+  x->scope = scope;
+
+  return x;
+}
+
+/* Free a agent expression.  */
+void
+free_agent_expr (x)
+     struct agent_expr *x;
+{
+  free (x->buf);
+  free (x);
+}
+
+
+/* Make sure that X has room for at least N more bytes.  This doesn't
+   affect the length, just the allocated size.  */
+static void
+grow_expr (x, n)
+     struct agent_expr *x;
+     int n;
+{
+  if (x->len + n > x->size)
+    {
+      x->size *= 2;
+      if (x->size < x->len + n)
+	x->size = x->len + n + 10;
+      x->buf = xrealloc (x->buf, x->size);
+    }
+}
+
+
+/* Append the low N bytes of VAL as an N-byte integer to the
+   expression X, in big-endian order.  */
+static void
+append_const (x, val, n)
+     struct agent_expr *x;
+     LONGEST val;
+     int n;
+{
+  int i;
+
+  grow_expr (x, n);
+  for (i = n - 1; i >= 0; i--)
+    {
+      x->buf[x->len + i] = val & 0xff;
+      val >>= 8;
+    }
+  x->len += n;
+}
+
+
+/* Extract an N-byte big-endian unsigned integer from expression X at
+   offset O.  */
+static LONGEST
+read_const (x, o, n)
+     struct agent_expr *x;
+     int o, n;
+{
+  int i;
+  LONGEST accum = 0;
+
+  /* Make sure we're not reading off the end of the expression.  */
+  if (o + n > x->len)
+    error ("GDB bug: ax-general.c (read_const): incomplete constant");
+
+  for (i = 0; i < n; i++)
+    accum = (accum << 8) | x->buf[o + i];
+  
+  return accum;
+}
+
+
+/* Append a simple operator OP to EXPR.  */
+void
+ax_simple (x, op)
+     struct agent_expr *x;
+     enum agent_op op;
+{
+  grow_expr (x, 1);
+  x->buf[x->len++] = op;
+}
+
+
+/* Append a sign-extension or zero-extension instruction to EXPR, to
+   extend an N-bit value.  */
+static void
+generic_ext (x, op, n)
+     struct agent_expr *x;
+     enum agent_op op;
+     int n;
+{
+  /* N must fit in a byte.  */
+  if (n < 0 || n > 255)
+    error ("GDB bug: ax-general.c (generic_ext): bit count out of range");
+  /* That had better be enough range.  */
+  if (sizeof (LONGEST) * 8 > 255)
+    error ("GDB bug: ax-general.c (generic_ext): opcode has inadequate range");
+
+  grow_expr (x, 2);
+  x->buf[x->len++] = op;
+  x->buf[x->len++] = n;
+}
+
+
+/* Append a sign-extension instruction to EXPR, to extend an N-bit value.  */
+void
+ax_ext (x, n)
+     struct agent_expr *x;
+     int n;
+{
+  generic_ext (x, aop_ext, n);
+}
+
+
+/* Append a zero-extension instruction to EXPR, to extend an N-bit value.  */
+void
+ax_zero_ext (x, n)
+     struct agent_expr *x;
+     int n;
+{
+  generic_ext (x, aop_zero_ext, n);
+}
+
+
+/* Append a trace_quick instruction to EXPR, to record N bytes.  */
+void
+ax_trace_quick (x, n)
+     struct agent_expr *x;
+     int n;
+{
+  /* N must fit in a byte.  */
+  if (n < 0 || n > 255)
+    error ("GDB bug: ax-general.c (ax_trace_quick): size out of range for trace_quick");
+
+  grow_expr (x, 2);
+  x->buf[x->len++] = aop_trace_quick;
+  x->buf[x->len++] = n;
+}
+
+
+/* Append a goto op to EXPR.  OP is the actual op (must be aop_goto or
+   aop_if_goto).  We assume we don't know the target offset yet,
+   because it's probably a forward branch, so we leave space in EXPR
+   for the target, and return the offset in EXPR of that space, so we
+   can backpatch it once we do know the target offset.  Use ax_label
+   to do the backpatching.  */
+int ax_goto (x, op)
+     struct agent_expr *x;
+     enum agent_op op;
+{
+  grow_expr (x, 3);
+  x->buf[x->len + 0] = op;
+  x->buf[x->len + 1] = 0xff;
+  x->buf[x->len + 2] = 0xff;
+  x->len += 3;
+  return x->len - 2;
+}
+
+/* Suppose a given call to ax_goto returns some value PATCH.  When you
+   know the offset TARGET that goto should jump to, call
+	ax_label (EXPR, PATCH, TARGET)
+   to patch TARGET into the ax_goto instruction.  */
+void
+ax_label (x, patch, target)
+     struct agent_expr *x;
+     int patch;
+     int target;
+{
+  /* Make sure the value is in range.  Don't accept 0xffff as an
+     offset; that's our magic sentinel value for unpatched branches.  */
+  if (target < 0 || target >= 0xffff)
+    error ("GDB bug: ax-general.c (ax_label): label target out of range");
+  
+  x->buf[patch] = (target >> 8) & 0xff;
+  x->buf[patch + 1] = target & 0xff;
+}
+
+
+/* Assemble code to push a constant on the stack.  */
+void
+ax_const_l (x, l)
+     struct agent_expr *x;
+     LONGEST l;
+{
+  static enum agent_op ops[]
+    = { aop_const8, aop_const16, aop_const32, aop_const64 };
+  int size;
+  int op;
+
+  /* How big is the number?  'op' keeps track of which opcode to use.
+     Notice that we don't really care whether the original number was
+     signed or unsigned; we always reproduce the value exactly, and
+     use the shortest representation.  */
+  for (op = 0, size = 8; size < 64; size *= 2, op++)
+    if (-((LONGEST) 1 << size) <= l && l < ((LONGEST) 1 << size))
+      break;
+
+  /* Emit the right opcode... */
+  ax_simple (x, ops[op]);
+
+  /* Emit the low SIZE bytes as an unsigned number.  We know that
+     sign-extending this will yield l.  */
+  append_const (x, l, size / 8);
+
+  /* Now, if it was negative, and not full-sized, sign-extend it.  */
+  if (l < 0 && size < 64)
+    ax_ext (x, size);
+}
+
+
+void
+ax_const_d (x, d)
+     struct agent_expr *x;
+     LONGEST d;
+{
+  /* FIXME: floating-point support not present yet.  */
+  error ("GDB bug: ax-general.c (ax_const_d): floating point not supported yet");
+}
+
+
+/* Assemble code to push the value of register number REG on the
+   stack.  */
+void ax_reg (x, reg)
+     struct agent_expr *x;
+     int reg;
+{
+  /* Make sure the register number is in range.  */
+  if (reg < 0 || reg > 0xffff)
+    error ("GDB bug: ax-general.c (ax_reg): register number out of range");
+  grow_expr (x, 3);
+  x->buf[x->len    ] = aop_reg;
+  x->buf[x->len + 1] = (reg >> 8) & 0xff;
+  x->buf[x->len + 2] = (reg     ) & 0xff;
+  x->len += 3;
+}
+
+
+
+/* Functions for disassembling agent expressions, and otherwise
+   debugging the expression compiler.  */
+
+struct aop_map aop_map[] = {
+  { 0, 0, 0, 0, 0 },
+  { "float", 0, 0, 0, 0 },		   /* 0x01 */
+  { "add", 0, 0, 2, 1 },		   /* 0x02 */
+  { "sub", 0, 0, 2, 1 },		   /* 0x03 */
+  { "mul", 0, 0, 2, 1 },		   /* 0x04 */
+  { "div_signed", 0, 0, 2, 1 },		   /* 0x05 */
+  { "div_unsigned", 0, 0, 2, 1 },	   /* 0x06 */
+  { "rem_signed", 0, 0, 2, 1 },		   /* 0x07 */
+  { "rem_unsigned", 0, 0, 2, 1 },	   /* 0x08 */
+  { "lsh", 0, 0, 2, 1 },		   /* 0x09 */
+  { "rsh_signed", 0, 0, 2, 1 },		   /* 0x0a */
+  { "rsh_unsigned", 0, 0, 2, 1 },	   /* 0x0b */
+  { "trace", 0, 0, 2, 0 },		   /* 0x0c */
+  { "trace_quick", 1, 0, 1, 1 },	   /* 0x0d */
+  { "log_not", 0, 0, 1, 1 },		   /* 0x0e */
+  { "bit_and", 0, 0, 2, 1 },		   /* 0x0f */
+  { "bit_or", 0, 0, 2, 1 },		   /* 0x10 */
+  { "bit_xor", 0, 0, 2, 1 },		   /* 0x11 */
+  { "bit_not", 0, 0, 1, 1 },		   /* 0x12 */
+  { "equal", 0, 0, 2, 1 },		   /* 0x13 */
+  { "less_signed", 0, 0, 2, 1 },	   /* 0x14 */
+  { "less_unsigned", 0, 0, 2, 1 },	   /* 0x15 */
+  { "ext", 1, 0, 1, 1 },		   /* 0x16 */
+  { "ref8", 0, 8, 1, 1 },		   /* 0x17 */
+  { "ref16", 0, 16, 1, 1 },		   /* 0x18 */
+  { "ref32", 0, 32, 1, 1 },		   /* 0x19 */
+  { "ref64", 0, 64, 1, 1 },		   /* 0x1a */
+  { "ref_float", 0, 0, 1, 1 },		   /* 0x1b */
+  { "ref_double", 0, 0, 1, 1 },		   /* 0x1c */
+  { "ref_long_double", 0, 0, 1, 1 },	   /* 0x1d */
+  { "l_to_d", 0, 0, 1, 1 },		   /* 0x1e */
+  { "d_to_l", 0, 0, 1, 1 },		   /* 0x1f */
+  { "if_goto", 2, 0, 1, 0 },		   /* 0x20 */
+  { "goto", 2, 0, 0, 0 },		   /* 0x21 */
+  { "const8", 1, 8, 0, 1 },		   /* 0x22 */
+  { "const16", 2, 16, 0, 1 },		   /* 0x23 */
+  { "const32", 4, 32, 0, 1 },		   /* 0x24 */
+  { "const64", 8, 64, 0, 1 },		   /* 0x25 */
+  { "reg", 2, 0, 0, 1 },		   /* 0x26 */
+  { "end", 0, 0, 0, 0 },		   /* 0x27 */
+  { "dup", 0, 0, 1, 2 },		   /* 0x28 */
+  { "pop", 0, 0, 1, 0 },		   /* 0x29 */
+  { "zero_ext", 1, 0, 1, 1 },		   /* 0x2a */
+  { "swap", 0, 0, 2, 2 },		   /* 0x2b */
+  { 0, 0, 0, 0, 0 },			   /* 0x2c */
+  { 0, 0, 0, 0, 0 },			   /* 0x2d */
+  { 0, 0, 0, 0, 0 },			   /* 0x2e */
+  { 0, 0, 0, 0, 0 },			   /* 0x2f */
+  { "trace16", 2, 0, 1, 1 },		   /* 0x30 */
+};
+
+
+/* Disassemble the expression EXPR, writing to F.  */
+void
+ax_print (f, x)
+     GDB_FILE *f;
+     struct agent_expr *x;
+{
+  int i;
+  int is_float = 0;
+
+  /* Check the size of the name array against the number of entries in
+     the enum, to catch additions that people didn't sync.  */
+  if ((sizeof (aop_map) / sizeof (aop_map[0]))
+      != aop_last)
+    error ("GDB bug: ax-general.c (ax_print): opcode map out of sync");
+  
+  for (i = 0; i < x->len; )
+    {
+      enum agent_op op = x->buf[i];
+
+      if (op >= (sizeof (aop_map) / sizeof (aop_map[0]))
+	  || ! aop_map[op].name)
+	{
+	  fprintf_filtered (f, "%3d  <bad opcode %02x>\n", i, op);
+	  i++;
+	  continue;
+	}
+      if (i + 1 + aop_map[op].op_size > x->len)
+	{
+	  fprintf_filtered (f, "%3d  <incomplete opcode %s>\n",
+			    i, aop_map[op].name);
+	  break;
+	}
+
+      fprintf_filtered (f, "%3d  %s", i, aop_map[op].name);
+      if (aop_map[op].op_size > 0)
+	{
+	  fputs_filtered (" ", f);
+	  
+	  print_longest (f, 'd', 0,
+			 read_const (x, i + 1, aop_map[op].op_size));
+	}
+      fprintf_filtered (f, "\n");
+      i += 1 + aop_map[op].op_size;
+
+      is_float = (op == aop_float);
+    }
+}
+
+
+/* Given an agent expression AX, fill in an agent_reqs structure REQS
+   describing it.  */
+void
+ax_reqs (ax, reqs)
+     struct agent_expr *ax;
+     struct agent_reqs *reqs;
+{
+  int i;
+  int height;
+
+  /* Bit vector for registers used.  */
+  int reg_mask_len = 1;
+  unsigned char *reg_mask = xmalloc (reg_mask_len * sizeof (reg_mask[0]));
+
+  /* Jump target table.  targets[i] is non-zero iff there is a jump to
+     offset i.  */
+  char *targets = (char *) alloca (ax->len * sizeof (targets[0]));
+
+  /* Instruction boundary table.  boundary[i] is non-zero iff an
+     instruction starts at offset i.  */
+  char *boundary = (char *) alloca (ax->len * sizeof (boundary[0]));
+
+  /* Stack height record.  iff either targets[i] or boundary[i] is
+     non-zero, heights[i] is the height the stack should have before
+     executing the bytecode at that point.  */
+  int *heights = (int *) alloca (ax->len * sizeof (heights[0]));
+
+  /* Pointer to a description of the present op.  */
+  struct aop_map *op;
+
+  memset (reg_mask, 0, reg_mask_len * sizeof (reg_mask[0]));
+  memset (targets, 0, ax->len * sizeof (targets[0]));
+  memset (boundary, 0, ax->len * sizeof (boundary[0]));
+
+  reqs->max_height = reqs->min_height = height = 0;
+  reqs->flaw = agent_flaw_none;
+  reqs->max_data_size = 0;
+
+  for (i = 0; i < ax->len; i += 1 + op->op_size)
+    {
+      if (ax->buf[i] > (sizeof (aop_map) / sizeof (aop_map[0])))
+	{
+	  reqs->flaw = agent_flaw_bad_instruction;
+	  free (reg_mask);
+	  return;
+	}
+
+      op = &aop_map[ax->buf[i]];
+
+      if (! op->name)
+	{
+	  reqs->flaw = agent_flaw_bad_instruction;
+	  free (reg_mask);
+	  return;
+	}
+	
+      if (i + 1 + op->op_size > ax->len)
+	{
+	  reqs->flaw = agent_flaw_incomplete_instruction;
+	  free (reg_mask);
+	  return;
+	}
+
+      /* If this instruction is a jump target, does the current stack
+         height match the stack height at the jump source?  */
+      if (targets[i] && (heights[i] != height))
+	{
+	  reqs->flaw = agent_flaw_height_mismatch;
+	  free (reg_mask);
+	  return;
+	}
+
+      boundary[i] = 1;
+      heights[i] = height;
+
+      height -= op->consumed;
+      if (height < reqs->min_height)
+	reqs->min_height = height;
+      height += op->produced;
+      if (height > reqs->max_height)
+	reqs->max_height = height;
+
+      if (op->data_size > reqs->max_data_size)
+	reqs->max_data_size = op->data_size;
+
+      /* For jump instructions, check that the target is a valid
+	 offset.  If it is, record the fact that that location is a
+	 jump target, and record the height we expect there.  */
+      if (aop_goto == op - aop_map
+	  || aop_if_goto == op - aop_map)
+	{
+	  int target = read_const (ax, i + 1, 2);
+	  if (target < 0 || target >= ax->len)
+	    {
+	      reqs->flaw = agent_flaw_bad_jump;
+	      free (reg_mask);
+	      return;
+	    }
+	  /* Have we already found other jumps to the same location?  */
+	  else if (targets[target])
+	    {
+	      if (heights[i] != height)
+		{
+		  reqs->flaw = agent_flaw_height_mismatch;
+		  free (reg_mask);
+		  return;
+		}
+	    }
+	  else
+	    {
+	      targets[target] = 1;
+	      heights[target] = height;
+	    }
+	}
+      
+      /* For unconditional jumps with a successor, check that the
+         successor is a target, and pick up its stack height.  */
+      if (aop_goto == op - aop_map
+	  && i + 3 < ax->len)
+	{
+	  if (! targets[i + 3])
+	    {
+	      reqs->flaw = agent_flaw_hole;
+	      free (reg_mask);
+	      return;
+	    }
+
+	  height = heights[i + 3];
+	}
+
+      /* For reg instructions, record the register in the bit mask.  */
+      if (aop_reg == op - aop_map)
+	{
+	  int reg = read_const (ax, i + 1, 2);
+	  int byte = reg / 8;
+
+	  /* Grow the bit mask if necessary.  */
+	  if (byte >= reg_mask_len)
+	    {
+	      /* It's not appropriate to double here.  This isn't a
+                 string buffer.  */
+	      int new_len = byte + 1;
+	      reg_mask = xrealloc (reg_mask, 
+				   new_len * sizeof (reg_mask[0]));
+	      memset (reg_mask + reg_mask_len, 0,
+		      (new_len - reg_mask_len) * sizeof (reg_mask[0]));
+	      reg_mask_len = new_len;
+	    }
+
+	  reg_mask[byte] |= 1 << (reg % 8);
+	}
+    }
+
+  /* Check that all the targets are on boundaries.  */
+  for (i = 0; i < ax->len; i++)
+    if (targets[i] && !boundary[i])
+      {
+	reqs->flaw = agent_flaw_bad_jump;
+	free (reg_mask);
+	return;
+      }
+
+  reqs->final_height = height;
+  reqs->reg_mask_len = reg_mask_len;
+  reqs->reg_mask = reg_mask;
+}
diff --git a/gdb/ax.h b/gdb/ax.h
new file mode 100644
index 0000000..2ee0f0b
--- /dev/null
+++ b/gdb/ax.h
@@ -0,0 +1,285 @@
+/* Definitions for expressions designed to be executed on the agent
+   Copyright 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* $Id$ */
+
+#ifndef AGENTEXPR_H
+#define AGENTEXPR_H
+
+/* It's sometimes useful to be able to debug programs that you can't
+   really stop for more than a fraction of a second.  To this end, the
+   user can specify a tracepoint (like a breakpoint, but you don't
+   stop at it), and specify a bunch of expressions to record the
+   values of when that tracepoint is reached.  As the program runs,
+   GDB collects the values.  At any point (possibly while values are
+   still being collected), the user can display the collected values.
+
+   This is used with remote debugging; we don't really support it on
+   native configurations.
+
+   This means that expressions are being evaluated by the remote agent,
+   which doesn't have any access to the symbol table information, and
+   needs to be small and simple.
+
+   The agent_expr routines and datatypes are a bytecode language
+   designed to be executed by the agent.  Agent expressions work in
+   terms of fixed-width values, operators, memory references, and
+   register references.  You can evaluate a agent expression just given
+   a bunch of memory and register values to sniff at; you don't need
+   any symbolic information like variable names, types, etc.
+
+   GDB translates source expressions, whose meaning depends on
+   symbolic information, into agent bytecode expressions, whose meaning
+   is independent of symbolic information.  This means the agent can
+   evaluate them on the fly without reference to data only available
+   to the host GDB.  */
+
+
+/* Agent expression data structures.  */
+
+/* The type of an element of the agent expression stack.
+   The bytecode operation indicates which element we should access;
+   the value itself has no typing information.  GDB generates all
+   bytecode streams, so we don't have to worry about type errors.  */
+
+union agent_val {
+  LONGEST l;
+  DOUBLEST d;
+};
+
+/* A buffer containing a agent expression.  */
+struct agent_expr {
+  unsigned char *buf;
+  int len;			/* number of characters used */
+  int size;			/* allocated size */
+  CORE_ADDR scope;
+};
+
+
+
+
+/* The actual values of the various bytecode operations.
+
+   Other independent implementations of the agent bytecode engine will
+   rely on the exact values of these enums, and may not be recompiled
+   when we change this table.  The numeric values should remain fixed
+   whenever possible.  Thus, we assign them values explicitly here (to
+   allow gaps to form safely), and the disassembly table in
+   agentexpr.h behaves like an opcode map.  If you want to see them
+   grouped logically, see doc/agentexpr.texi.  */
+
+enum agent_op {
+  aop_float = 0x01,
+  aop_add = 0x02,
+  aop_sub = 0x03,
+  aop_mul = 0x04,
+  aop_div_signed = 0x05,
+  aop_div_unsigned = 0x06,
+  aop_rem_signed = 0x07,
+  aop_rem_unsigned = 0x08,
+  aop_lsh = 0x09,
+  aop_rsh_signed = 0x0a,
+  aop_rsh_unsigned = 0x0b,
+  aop_trace = 0x0c,
+  aop_trace_quick = 0x0d,
+  aop_log_not = 0x0e,
+  aop_bit_and = 0x0f,
+  aop_bit_or = 0x10,
+  aop_bit_xor = 0x11,
+  aop_bit_not = 0x12,
+  aop_equal = 0x13,
+  aop_less_signed = 0x14,
+  aop_less_unsigned = 0x15,
+  aop_ext = 0x16,
+  aop_ref8 = 0x17,
+  aop_ref16 = 0x18,
+  aop_ref32 = 0x19,
+  aop_ref64 = 0x1a,
+  aop_ref_float = 0x1b,
+  aop_ref_double = 0x1c,
+  aop_ref_long_double = 0x1d,
+  aop_l_to_d = 0x1e,
+  aop_d_to_l = 0x1f,
+  aop_if_goto = 0x20,
+  aop_goto = 0x21,
+  aop_const8 = 0x22,
+  aop_const16 = 0x23,
+  aop_const32 = 0x24,
+  aop_const64 = 0x25,
+  aop_reg = 0x26,
+  aop_end = 0x27,
+  aop_dup = 0x28,
+  aop_pop = 0x29,
+  aop_zero_ext = 0x2a,
+  aop_swap = 0x2b,
+  aop_trace16 = 0x30,
+  aop_last
+};
+
+
+
+/* Functions for building expressions.  */
+
+/* Allocate a new, empty agent expression.  */
+extern struct agent_expr *new_agent_expr PARAMS ((CORE_ADDR));
+
+/* Free a agent expression.  */
+extern void free_agent_expr PARAMS ((struct agent_expr *));
+
+/* Append a simple operator OP to EXPR.  */
+extern void ax_simple PARAMS ((struct agent_expr *EXPR, enum agent_op OP));
+
+/* Append the floating-point prefix, for the next bytecode.  */
+#define ax_float(EXPR) (ax_simple ((EXPR), aop_float))
+
+/* Append a sign-extension instruction to EXPR, to extend an N-bit value.  */
+extern void ax_ext PARAMS ((struct agent_expr *EXPR, int N));
+
+/* Append a zero-extension instruction to EXPR, to extend an N-bit value.  */
+extern void ax_zero_ext PARAMS ((struct agent_expr *EXPR, int N));
+
+/* Append a trace_quick instruction to EXPR, to record N bytes.  */
+extern void ax_trace_quick PARAMS ((struct agent_expr *EXPR, int N));
+
+/* Append a goto op to EXPR.  OP is the actual op (must be aop_goto or
+   aop_if_goto).  We assume we don't know the target offset yet,
+   because it's probably a forward branch, so we leave space in EXPR
+   for the target, and return the offset in EXPR of that space, so we
+   can backpatch it once we do know the target offset.  Use ax_label
+   to do the backpatching.  */
+extern int ax_goto PARAMS ((struct agent_expr *EXPR, enum agent_op OP));
+
+/* Suppose a given call to ax_goto returns some value PATCH.  When you
+   know the offset TARGET that goto should jump to, call
+	ax_label (EXPR, PATCH, TARGET)
+   to patch TARGET into the ax_goto instruction.  */
+extern void ax_label PARAMS ((struct agent_expr *EXPR, int patch, int target));
+
+/* Assemble code to push a constant on the stack.  */
+extern void ax_const_l PARAMS ((struct agent_expr *EXPR, LONGEST l));
+extern void ax_const_d PARAMS ((struct agent_expr *EXPR, LONGEST d));
+
+/* Assemble code to push the value of register number REG on the
+   stack.  */
+extern void ax_reg PARAMS ((struct agent_expr *EXPR, int REG));
+
+
+/* Functions for printing out expressions, and otherwise debugging
+   things.  */
+
+/* Disassemble the expression EXPR, writing to F.  */
+extern void ax_print PARAMS ((GDB_FILE *f, struct agent_expr *EXPR));
+
+/* An entry in the opcode map.  */
+struct aop_map {
+
+  /* The name of the opcode.  Null means that this entry is not a
+     valid opcode --- a hole in the opcode space.  */
+  char *name;
+
+  /* All opcodes take no operands from the bytecode stream, or take
+     unsigned integers of various sizes.  If this is a positive number
+     n, then the opcode is followed by an n-byte operand, which should
+     be printed as an unsigned integer.  If this is zero, then the
+     opcode takes no operands from the bytecode stream.
+
+     If we get more complicated opcodes in the future, don't add other
+     magic values of this; that's a crock.  Add an `enum encoding'
+     field to this, or something like that.  */
+  int op_size;
+
+  /* The size of the data operated upon, in bits, for bytecodes that
+     care about that (ref and const).  Zero for all others.  */
+  int data_size;
+
+  /* Number of stack elements consumed, and number produced.  */
+  int consumed, produced;
+};
+
+/* Map of the bytecodes, indexed by bytecode number.  */
+extern struct aop_map aop_map[];
+
+/* Different kinds of flaws an agent expression might have, as
+   detected by agent_reqs.  */
+enum agent_flaws {
+  agent_flaw_none = 0,		/* code is good */
+
+  /* There is an invalid instruction in the stream.  */
+  agent_flaw_bad_instruction,
+
+  /* There is an incomplete instruction at the end of the expression.  */
+  agent_flaw_incomplete_instruction,
+
+  /* agent_reqs was unable to prove that every jump target is to a
+     valid offset.  Valid offsets are within the bounds of the
+     expression, and to a valid instruction boundary.  */
+  agent_flaw_bad_jump,
+
+  /* agent_reqs was unable to prove to its satisfaction that, for each
+     jump target location, the stack will have the same height whether
+     that location is reached via a jump or by straight execution.  */
+  agent_flaw_height_mismatch,
+
+  /* agent_reqs was unable to prove that every instruction following
+     an unconditional jump was the target of some other jump.  */
+  agent_flaw_hole
+};
+
+/* Structure describing the requirements of a bytecode expression.  */
+struct agent_reqs {
+
+  /* If the following is not equal to agent_flaw_none, the rest of the
+     information in this structure is suspect.  */
+  enum agent_flaws flaw;
+
+  /* Number of elements left on stack at end; may be negative if expr
+     only consumes elements.  */
+  int final_height;
+
+  /* Maximum and minimum stack height, relative to initial height.  */
+  int max_height, min_height;
+
+  /* Largest `ref' or `const' opcode used, in bits.  Zero means the
+     expression has no such instructions.  */
+  int max_data_size;
+
+  /* Bit vector of registers used.  Register R is used iff
+  
+	reg_mask[R / 8] & (1 << (R % 8))
+
+     is non-zero.  Note!  You may not assume that this bitmask is long
+     enough to hold bits for all the registers of the machine; the
+     agent expression code has no idea how many registers the machine
+     has.  However, the bitmask is reg_mask_len bytes long, so the
+     valid register numbers run from 0 to reg_mask_len * 8 - 1.  
+
+     We're assuming eight-bit bytes.  So sue me.
+
+     The caller should free reg_list when done.  */
+  int reg_mask_len;
+  unsigned char *reg_mask;
+};
+
+
+/* Given an agent expression AX, fill in an agent_reqs structure REQS
+   describing it.  */
+extern void ax_reqs PARAMS ((struct agent_expr *ax,
+			     struct agent_reqs *reqs));
+
+#endif /* AGENTEXPR_H */
diff --git a/gdb/bcache.c b/gdb/bcache.c
new file mode 100644
index 0000000..d28515b
--- /dev/null
+++ b/gdb/bcache.c
@@ -0,0 +1,219 @@
+/* Implement a cached obstack.
+   Written by Fred Fish (fnf@cygnus.com)
+   Copyright 1995, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bcache.h"
+#include "gdb_string.h"		/* For memcpy declaration */
+
+/* Prototypes for local functions. */
+
+static unsigned int hash PARAMS ((void *, int));
+
+static void *lookup_cache PARAMS ((void *, int, int, struct bcache *));
+
+/* FIXME:  Incredibly simplistic hash generator.  Probably way too expensive
+ (consider long strings) and unlikely to have good distribution across hash
+ values for typical input. */
+
+static unsigned int
+hash (bytes, count)
+     void *bytes;
+     int count;
+{
+  unsigned int len;
+  unsigned long hashval;
+  unsigned int c;
+  const unsigned char *data = bytes;
+
+  hashval = 0;
+  len = 0;
+  while (count-- > 0)
+    {
+      c = *data++;
+      hashval += c + (c << 17);
+      hashval ^= hashval >> 2;
+      ++len;
+    }
+  hashval += len + (len << 17);
+  hashval ^= hashval >> 2;
+  return (hashval % BCACHE_HASHSIZE);
+}
+
+static void *
+lookup_cache (bytes, count, hashval, bcachep)
+     void *bytes;
+     int count;
+     int hashval;
+     struct bcache *bcachep;
+{
+  void *location = NULL;
+  struct hashlink **hashtablep;
+  struct hashlink *linkp;
+
+  hashtablep = bcachep -> indextable[count];
+  if (hashtablep != NULL)
+    {
+      linkp = hashtablep[hashval];
+      while (linkp != NULL)
+	{
+	  if (memcmp (BCACHE_DATA (linkp), bytes, count) == 0)
+	    {
+	      location = BCACHE_DATA (linkp);
+	      break;
+	    }
+	  linkp = linkp -> next;
+	}
+    }
+  return (location);
+}
+
+void *
+bcache (bytes, count, bcachep)
+     void *bytes;
+     int count;
+     struct bcache *bcachep;
+{
+  int hashval;
+  void *location;
+  struct hashlink *newlink;
+  struct hashlink **linkpp;
+  struct hashlink ***hashtablepp;
+
+  if (count >= BCACHE_MAXLENGTH)
+    {
+      /* Rare enough to just stash unique copies */
+      location = (void *) obstack_alloc (&bcachep->cache, count);
+      bcachep -> cache_bytes += count;
+      memcpy (location, bytes, count);
+      bcachep -> bcache_overflows++;
+    }
+  else
+    {
+      hashval = hash (bytes, count);
+      location = lookup_cache (bytes, count, hashval, bcachep);
+      if (location != NULL)
+	{
+	  bcachep -> cache_savings += count;
+	  bcachep -> cache_hits++;
+	}
+      else
+	{
+	  bcachep -> cache_misses++;
+	  hashtablepp = &bcachep -> indextable[count];
+	  if (*hashtablepp == NULL)
+	    {
+	      *hashtablepp = (struct hashlink **)
+		obstack_alloc (&bcachep->cache, BCACHE_HASHSIZE * sizeof (struct hashlink *));
+	      bcachep -> cache_bytes += BCACHE_HASHSIZE * sizeof (struct hashlink *);
+	      memset (*hashtablepp, 0, BCACHE_HASHSIZE * sizeof (struct hashlink *));
+	    }
+	  linkpp = &(*hashtablepp)[hashval];
+	  newlink = (struct hashlink *)
+	    obstack_alloc (&bcachep->cache, BCACHE_DATA_ALIGNMENT + count);
+	  bcachep -> cache_bytes += BCACHE_DATA_ALIGNMENT + count;
+	  memcpy (BCACHE_DATA (newlink), bytes, count);
+	  newlink -> next = *linkpp;
+	  *linkpp = newlink;
+	  location = BCACHE_DATA (newlink);
+	}
+    }
+  return (location);
+}
+
+#if MAINTENANCE_CMDS
+
+void
+print_bcache_statistics (bcachep, id)
+     struct bcache *bcachep;
+     char *id;
+{
+  struct hashlink **hashtablep;
+  struct hashlink *linkp;
+  int tidx, tcount, hidx, hcount, lcount, lmax, temp, lmaxt, lmaxh;
+
+  for (lmax = lcount = tcount = hcount = tidx = 0; tidx < BCACHE_MAXLENGTH; tidx++)
+    {
+      hashtablep = bcachep -> indextable[tidx];
+      if (hashtablep != NULL)
+	{
+	  tcount++;
+	  for (hidx = 0; hidx < BCACHE_HASHSIZE; hidx++)
+	    {
+	      linkp = hashtablep[hidx];
+	      if (linkp != NULL)
+		{
+		  hcount++;
+		  for (temp = 0; linkp != NULL; linkp = linkp -> next)
+		    {
+		      lcount++;
+		      temp++;
+		    }
+		  if (temp > lmax)
+		    {
+		      lmax = temp;
+		      lmaxt = tidx;
+		      lmaxh = hidx;
+		    }
+		}
+	    }
+	}
+    }
+  printf_filtered ("  Cached '%s' statistics:\n", id);
+  printf_filtered ("    Cache hits: %d\n", bcachep -> cache_hits);
+  printf_filtered ("    Cache misses: %d\n", bcachep -> cache_misses);
+  printf_filtered ("    Cache hit ratio: ");
+  if (bcachep -> cache_hits + bcachep -> cache_misses > 0)
+    {
+      printf_filtered ("%d%%\n", ((bcachep -> cache_hits) * 100) /
+		       (bcachep -> cache_hits + bcachep -> cache_misses));
+    }
+  else
+    {
+      printf_filtered ("(not applicable)\n");
+    }
+  printf_filtered ("    Space used for caching: %d\n", bcachep -> cache_bytes);
+  printf_filtered ("    Space saved by cache hits: %d\n", bcachep -> cache_savings);
+  printf_filtered ("    Number of bcache overflows: %d\n", bcachep -> bcache_overflows);
+  printf_filtered ("    Number of index buckets used: %d\n", tcount);
+  printf_filtered ("    Number of hash table buckets used: %d\n", hcount);
+  printf_filtered ("    Number of chained items: %d\n", lcount);
+  printf_filtered ("    Average hash table population: ");
+  if (tcount > 0)
+    {
+      printf_filtered ("%d%%\n", (hcount * 100) / (tcount * BCACHE_HASHSIZE));
+    }
+  else
+    {
+      printf_filtered ("(not applicable)\n");
+    }
+  printf_filtered ("    Average chain length ");
+  if (hcount > 0)
+    {
+      printf_filtered ("%d\n", lcount / hcount);
+    }
+  else
+    {
+      printf_filtered ("(not applicable)\n");
+    }
+  printf_filtered ("    Maximum chain length %d at %d:%d\n", lmax, lmaxt, lmaxh);
+}
+
+#endif	/* MAINTENANCE_CMDS */
diff --git a/gdb/bcache.h b/gdb/bcache.h
new file mode 100644
index 0000000..cf0c62e
--- /dev/null
+++ b/gdb/bcache.h
@@ -0,0 +1,72 @@
+/* Include file cached obstack implementation.
+   Written by Fred Fish (fnf@cygnus.com)
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef BCACHE_H
+#define BCACHE_H 1
+
+#define BCACHE_HASHLENGTH	12	/* Number of bits in hash value */
+#define BCACHE_HASHSIZE	(1 << BCACHE_HASHLENGTH)
+#define BCACHE_MAXLENGTH	128
+
+/* Note that the user data is stored in data[].  Since it can be any type,
+   it needs to have the same alignment  as the most strict alignment of 
+   any type on the host machine.  So do it the same way obstack does. */
+
+struct hashlink {
+  struct hashlink *next;
+  union {
+    char data[1];
+    double dummy;
+  } d;
+};
+
+/* BCACHE_DATA is used to get the address of the cached data. */
+
+#define BCACHE_DATA(p) ((p)->d.data)
+
+/* BCACHE_DATA_ALIGNMENT is used to get the offset of the start of
+   cached data within the hashlink struct.  This value, plus the
+   size of the cached data, is the amount of space to allocate for
+   a hashlink struct to hold the next pointer and the data. */
+
+#define BCACHE_DATA_ALIGNMENT \
+	(((char *) BCACHE_DATA((struct hashlink*) 0) - (char *) 0))
+
+struct bcache {
+  struct obstack cache;
+  struct hashlink **indextable[BCACHE_MAXLENGTH];
+  int cache_hits;
+  int cache_misses;
+  int cache_bytes;
+  int cache_savings;
+  int bcache_overflows;
+};
+
+extern void *
+bcache PARAMS ((void *bytes, int count, struct bcache *bcachep));
+
+#if MAINTENANCE_CMDS
+
+extern void
+print_bcache_statistics PARAMS ((struct bcache *, char *));
+
+#endif	/* MAINTENANCE_CMDS */
+
+#endif /* BCACHE_H */
diff --git a/gdb/blockframe.c b/gdb/blockframe.c
new file mode 100644
index 0000000..9366ca6
--- /dev/null
+++ b/gdb/blockframe.c
@@ -0,0 +1,1301 @@
+/* Get info from stack frames;
+   convert between frames, blocks, functions and pc values.
+   Copyright 1986, 87, 88, 89, 91, 94, 95, 96, 97, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "frame.h"
+#include "gdbcore.h"
+#include "value.h"		/* for read_register */
+#include "target.h"		/* for target_has_stack */
+#include "inferior.h"		/* for read_pc */
+#include "annotate.h"
+
+/* Prototypes for exported functions. */
+
+void _initialize_blockframe PARAMS ((void));
+
+/* A default FRAME_CHAIN_VALID, in the form that is suitable for most
+   targets.  If FRAME_CHAIN_VALID returns zero it means that the given
+   frame is the outermost one and has no caller. */
+
+int
+default_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;
+{
+  return ((chain) != 0
+	  && !inside_main_func ((thisframe) -> pc)
+	  && !inside_entry_func ((thisframe) -> pc));
+}
+
+/* Use the alternate method of avoiding running up off the end of the
+   frame chain or following frames back into the startup code.  See
+   the comments in objfiles.h. */
+   
+int
+alternate_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;
+{
+  return ((chain) != 0
+	  && !inside_entry_file (FRAME_SAVED_PC (thisframe)));
+}
+
+/* A very simple method of determining a valid frame */
+   
+int
+nonnull_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;
+{
+  return ((chain) != 0);
+}
+
+/* Is ADDR inside the startup file?  Note that if your machine
+   has a way to detect the bottom of the stack, there is no need
+   to call this function from FRAME_CHAIN_VALID; the reason for
+   doing so is that some machines have no way of detecting bottom
+   of stack. 
+
+   A PC of zero is always considered to be the bottom of the stack. */
+
+int
+inside_entry_file (addr)
+     CORE_ADDR addr;
+{
+  if (addr == 0)
+    return 1;
+  if (symfile_objfile == 0)
+    return 0;
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+  /* Do not stop backtracing if the pc is in the call dummy
+     at the entry point.  */
+/* FIXME: Won't always work with zeros for the last two arguments */
+  if (PC_IN_CALL_DUMMY (addr, 0, 0))	
+    return 0;
+#endif
+  return (addr >= symfile_objfile -> ei.entry_file_lowpc &&
+	  addr <  symfile_objfile -> ei.entry_file_highpc);
+}
+
+/* Test a specified PC value to see if it is in the range of addresses
+   that correspond to the main() function.  See comments above for why
+   we might want to do this.
+
+   Typically called from FRAME_CHAIN_VALID.
+
+   A PC of zero is always considered to be the bottom of the stack. */
+
+int
+inside_main_func (pc)
+CORE_ADDR pc;
+{
+  if (pc == 0)
+    return 1;
+  if (symfile_objfile == 0)
+    return 0;
+
+  /* If the addr range is not set up at symbol reading time, set it up now.
+     This is for FRAME_CHAIN_VALID_ALTERNATE. I do this for coff, because
+     it is unable to set it up and symbol reading time. */
+
+  if (symfile_objfile -> ei.main_func_lowpc == INVALID_ENTRY_LOWPC &&
+      symfile_objfile -> ei.main_func_highpc == INVALID_ENTRY_HIGHPC)
+    {
+      struct symbol *mainsym;
+
+      mainsym = lookup_symbol ("main", NULL, VAR_NAMESPACE, NULL, NULL);
+      if (mainsym && SYMBOL_CLASS(mainsym) == LOC_BLOCK)
+        {
+          symfile_objfile->ei.main_func_lowpc = 
+	    BLOCK_START (SYMBOL_BLOCK_VALUE (mainsym));
+          symfile_objfile->ei.main_func_highpc = 
+	    BLOCK_END (SYMBOL_BLOCK_VALUE (mainsym));
+        }
+    }
+  return (symfile_objfile -> ei.main_func_lowpc  <= pc &&
+	  symfile_objfile -> ei.main_func_highpc > pc);
+}
+
+/* Test a specified PC value to see if it is in the range of addresses
+   that correspond to the process entry point function.  See comments
+   in objfiles.h for why we might want to do this.
+
+   Typically called from FRAME_CHAIN_VALID.
+
+   A PC of zero is always considered to be the bottom of the stack. */
+
+int
+inside_entry_func (pc)
+CORE_ADDR pc;
+{
+  if (pc == 0)
+    return 1;
+  if (symfile_objfile == 0)
+    return 0;
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+  /* Do not stop backtracing if the pc is in the call dummy
+     at the entry point.  */
+/* FIXME: Won't always work with zeros for the last two arguments */
+  if (PC_IN_CALL_DUMMY (pc, 0, 0))
+    return 0;
+#endif
+  return (symfile_objfile -> ei.entry_func_lowpc  <= pc &&
+	  symfile_objfile -> ei.entry_func_highpc > pc);
+}
+
+/* Info about the innermost stack frame (contents of FP register) */
+
+static struct frame_info *current_frame;
+
+/* Cache for frame addresses already read by gdb.  Valid only while
+   inferior is stopped.  Control variables for the frame cache should
+   be local to this module.  */
+
+static struct obstack frame_cache_obstack;
+
+void *
+frame_obstack_alloc (size)
+     unsigned long size;
+{
+  return obstack_alloc (&frame_cache_obstack, size);
+}
+
+void
+frame_saved_regs_zalloc (fi)
+     struct frame_info *fi;
+{
+  fi->saved_regs = (CORE_ADDR*)
+    frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+  memset (fi->saved_regs, 0, SIZEOF_FRAME_SAVED_REGS);
+}
+
+
+/* Return the innermost (currently executing) stack frame.  */
+
+struct frame_info *
+get_current_frame ()
+{
+  if (current_frame == NULL)
+    {
+      if (target_has_stack)
+	current_frame = create_new_frame (read_fp (), read_pc ());
+      else
+	error ("No stack.");
+    }
+  return current_frame;
+}
+
+void
+set_current_frame (frame)
+     struct frame_info *frame;
+{
+  current_frame = frame;
+}
+
+/* Create an arbitrary (i.e. address specified by user) or innermost frame.
+   Always returns a non-NULL value.  */
+
+struct frame_info *
+create_new_frame (addr, pc)
+     CORE_ADDR addr;
+     CORE_ADDR pc;
+{
+  struct frame_info *fi;
+  char *name;
+
+  fi = (struct frame_info *)
+    obstack_alloc (&frame_cache_obstack,
+		   sizeof (struct frame_info));
+
+  /* Arbitrary frame */
+  fi->saved_regs = NULL;
+  fi->next = NULL;
+  fi->prev = NULL;
+  fi->frame = addr;
+  fi->pc = pc;
+  find_pc_partial_function (pc, &name, (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+  fi->signal_handler_caller = IN_SIGTRAMP (fi->pc, name);
+
+#ifdef INIT_EXTRA_FRAME_INFO
+  INIT_EXTRA_FRAME_INFO (0, fi);
+#endif
+
+  return fi;
+}
+
+/* Return the frame that called FI.
+   If FI is the original frame (it has no caller), return 0.  */
+
+struct frame_info *
+get_prev_frame (frame)
+     struct frame_info *frame;
+{
+  return get_prev_frame_info (frame);
+}
+
+/* Return the frame that FRAME calls (NULL if FRAME is the innermost
+   frame).  */
+
+struct frame_info *
+get_next_frame (frame)
+     struct frame_info *frame;
+{
+  return frame->next;
+}
+
+/* Flush the entire frame cache.  */
+
+void
+flush_cached_frames ()
+{
+  /* Since we can't really be sure what the first object allocated was */
+  obstack_free (&frame_cache_obstack, 0);
+  obstack_init (&frame_cache_obstack);
+
+  current_frame = NULL;  /* Invalidate cache */
+  select_frame (NULL, -1);
+  annotate_frames_invalid ();
+}
+
+/* Flush the frame cache, and start a new one if necessary.  */
+
+void
+reinit_frame_cache ()
+{
+  flush_cached_frames ();
+
+  /* FIXME: The inferior_pid test is wrong if there is a corefile.  */
+  if (inferior_pid != 0)
+    {
+      select_frame (get_current_frame (), 0);
+    }
+}
+
+/* If a machine allows frameless functions, it should define a macro
+   FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) in param.h.  FI is the struct
+   frame_info for the frame, and FRAMELESS should be set to nonzero
+   if it represents a frameless function invocation.  */
+
+/* Return nonzero if the function for this frame lacks a prologue.  Many
+   machines can define FRAMELESS_FUNCTION_INVOCATION to just call this
+   function.  */
+
+int
+frameless_look_for_prologue (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR func_start, after_prologue;
+  func_start = get_pc_function_start (frame->pc);
+  if (func_start)
+    {
+      func_start += FUNCTION_START_OFFSET;
+      after_prologue = func_start;
+#ifdef SKIP_PROLOGUE_FRAMELESS_P
+      /* This is faster, since only care whether there *is* a prologue,
+	 not how long it is.  */
+      SKIP_PROLOGUE_FRAMELESS_P (after_prologue);
+#else
+      SKIP_PROLOGUE (after_prologue);
+#endif
+      return after_prologue == func_start;
+    }
+  else if (frame->pc == 0)
+    /* A frame with a zero PC is usually created by dereferencing a NULL
+       function pointer, normally causing an immediate core dump of the
+       inferior. Mark function as frameless, as the inferior has no chance
+       of setting up a stack frame.  */
+    return 1;
+  else
+    /* If we can't find the start of the function, we don't really
+       know whether the function is frameless, but we should be able
+       to get a reasonable (i.e. best we can do under the
+       circumstances) backtrace by saying that it isn't.  */
+    return 0;
+}
+
+/* Default a few macros that people seldom redefine.  */
+
+#if !defined (INIT_FRAME_PC)
+#define INIT_FRAME_PC(fromleaf, prev) \
+  prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \
+	      prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+#endif
+
+#ifndef FRAME_CHAIN_COMBINE
+#define	FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
+#endif
+
+/* Return a structure containing various interesting information
+   about the frame that called NEXT_FRAME.  Returns NULL
+   if there is no such frame.  */
+
+struct frame_info *
+get_prev_frame_info (next_frame)
+     struct frame_info *next_frame;
+{
+  CORE_ADDR address = 0;
+  struct frame_info *prev;
+  int fromleaf = 0;
+  char *name;
+
+  /* If the requested entry is in the cache, return it.
+     Otherwise, figure out what the address should be for the entry
+     we're about to add to the cache. */
+
+  if (!next_frame)
+    {
+#if 0
+      /* This screws value_of_variable, which just wants a nice clean
+	 NULL return from block_innermost_frame if there are no frames.
+	 I don't think I've ever seen this message happen otherwise.
+	 And returning NULL here is a perfectly legitimate thing to do.  */
+      if (!current_frame)
+	{
+	  error ("You haven't set up a process's stack to examine.");
+	}
+#endif
+
+      return current_frame;
+    }
+
+  /* If we have the prev one, return it */
+  if (next_frame->prev)
+    return next_frame->prev;
+
+  /* On some machines it is possible to call a function without
+     setting up a stack frame for it.  On these machines, we
+     define this macro to take two args; a frameinfo pointer
+     identifying a frame and a variable to set or clear if it is
+     or isn't leafless.  */
+#ifdef FRAMELESS_FUNCTION_INVOCATION
+  /* Still don't want to worry about this except on the innermost
+     frame.  This macro will set FROMLEAF if NEXT_FRAME is a
+     frameless function invocation.  */
+  if (!(next_frame->next))
+    {
+      FRAMELESS_FUNCTION_INVOCATION (next_frame, fromleaf);
+      if (fromleaf)
+	address = FRAME_FP (next_frame);
+    }
+#endif
+
+  if (!fromleaf)
+    {
+      /* Two macros defined in tm.h specify the machine-dependent
+	 actions to be performed here.
+	 First, get the frame's chain-pointer.
+	 If that is zero, the frame is the outermost frame or a leaf
+	 called by the outermost frame.  This means that if start
+	 calls main without a frame, we'll return 0 (which is fine
+	 anyway).
+
+	 Nope; there's a problem.  This also returns when the current
+	 routine is a leaf of main.  This is unacceptable.  We move
+	 this to after the ffi test; I'd rather have backtraces from
+	 start go curfluy than have an abort called from main not show
+	 main.  */
+      address = FRAME_CHAIN (next_frame);
+      if (!FRAME_CHAIN_VALID (address, next_frame))
+	return 0;
+      address = FRAME_CHAIN_COMBINE (address, next_frame);
+    }
+  if (address == 0)
+    return 0;
+
+  prev = (struct frame_info *)
+    obstack_alloc (&frame_cache_obstack,
+		   sizeof (struct frame_info));
+
+  prev->saved_regs = NULL;
+  if (next_frame)
+    next_frame->prev = prev;
+  prev->next = next_frame;
+  prev->prev = (struct frame_info *) 0;
+  prev->frame = address;
+  prev->signal_handler_caller = 0;
+
+/* This change should not be needed, FIXME!  We should
+   determine whether any targets *need* INIT_FRAME_PC to happen
+   after INIT_EXTRA_FRAME_INFO and come up with a simple way to
+   express what goes on here.
+
+      INIT_EXTRA_FRAME_INFO is called from two places: create_new_frame
+      		(where the PC is already set up) and here (where it isn't).
+      INIT_FRAME_PC is only called from here, always after
+      		INIT_EXTRA_FRAME_INFO.
+   
+   The catch is the MIPS, where INIT_EXTRA_FRAME_INFO requires the PC
+   value (which hasn't been set yet).  Some other machines appear to
+   require INIT_EXTRA_FRAME_INFO before they can do INIT_FRAME_PC.  Phoo.
+
+   We shouldn't need INIT_FRAME_PC_FIRST to add more complication to
+   an already overcomplicated part of GDB.   gnu@cygnus.com, 15Sep92.
+
+   Assuming that some machines need INIT_FRAME_PC after
+   INIT_EXTRA_FRAME_INFO, one possible scheme:
+
+   SETUP_INNERMOST_FRAME()
+     Default version is just create_new_frame (read_fp ()),
+     read_pc ()).  Machines with extra frame info would do that (or the
+     local equivalent) and then set the extra fields.
+   SETUP_ARBITRARY_FRAME(argc, argv)
+     Only change here is that create_new_frame would no longer init extra
+     frame info; SETUP_ARBITRARY_FRAME would have to do that.
+   INIT_PREV_FRAME(fromleaf, prev)
+     Replace INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC.  This should
+     also return a flag saying whether to keep the new frame, or
+     whether to discard it, because on some machines (e.g.  mips) it
+     is really awkward to have FRAME_CHAIN_VALID called *before*
+     INIT_EXTRA_FRAME_INFO (there is no good way to get information
+     deduced in FRAME_CHAIN_VALID into the extra fields of the new frame).
+   std_frame_pc(fromleaf, prev)
+     This is the default setting for INIT_PREV_FRAME.  It just does what
+     the default INIT_FRAME_PC does.  Some machines will call it from
+     INIT_PREV_FRAME (either at the beginning, the end, or in the middle).
+     Some machines won't use it.
+   kingdon@cygnus.com, 13Apr93, 31Jan94, 14Dec94.  */
+
+#ifdef INIT_FRAME_PC_FIRST
+  INIT_FRAME_PC_FIRST (fromleaf, prev);
+#endif
+
+#ifdef INIT_EXTRA_FRAME_INFO
+  INIT_EXTRA_FRAME_INFO(fromleaf, prev);
+#endif
+
+  /* This entry is in the frame queue now, which is good since
+     FRAME_SAVED_PC may use that queue to figure out its value
+     (see tm-sparc.h).  We want the pc saved in the inferior frame. */
+  INIT_FRAME_PC(fromleaf, prev);
+
+  /* If ->frame and ->pc are unchanged, we are in the process of getting
+     ourselves into an infinite backtrace.  Some architectures check this
+     in FRAME_CHAIN or thereabouts, but it seems like there is no reason
+     this can't be an architecture-independent check.  */
+  if (next_frame != NULL)
+    {
+      if (prev->frame == next_frame->frame
+	  && prev->pc == next_frame->pc)
+	{
+	  next_frame->prev = NULL;
+	  obstack_free (&frame_cache_obstack, prev);
+	  return NULL;
+	}
+    }
+
+  find_pc_partial_function (prev->pc, &name,
+			    (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+  if (IN_SIGTRAMP (prev->pc, name))
+    prev->signal_handler_caller = 1;
+
+  return prev;
+}
+
+CORE_ADDR
+get_frame_pc (frame)
+     struct frame_info *frame;
+{
+  return frame->pc;
+}
+
+
+#ifdef FRAME_FIND_SAVED_REGS
+/* XXX - deprecated.  This is a compatibility function for targets
+   that do not yet implement FRAME_INIT_SAVED_REGS.  */
+/* Find the addresses in which registers are saved in FRAME.  */
+
+void
+get_frame_saved_regs (frame, saved_regs_addr)
+     struct frame_info *frame;
+     struct frame_saved_regs *saved_regs_addr;
+{
+  if (frame->saved_regs == NULL)
+    {
+      frame->saved_regs = (CORE_ADDR*)
+	frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+    }
+  if (saved_regs_addr == NULL)
+    {
+      struct frame_saved_regs saved_regs;
+      FRAME_FIND_SAVED_REGS (frame, saved_regs);
+      memcpy (frame->saved_regs, &saved_regs, SIZEOF_FRAME_SAVED_REGS);
+    }
+  else
+    {
+      FRAME_FIND_SAVED_REGS (frame, *saved_regs_addr);
+      memcpy (frame->saved_regs, saved_regs_addr, SIZEOF_FRAME_SAVED_REGS);
+    }
+}
+#endif
+
+/* Return the innermost lexical block in execution
+   in a specified stack frame.  The frame address is assumed valid.  */
+
+struct block *
+get_frame_block (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR pc;
+
+  pc = frame->pc;
+  if (frame->next != 0 && frame->next->signal_handler_caller == 0)
+    /* We are not in the innermost frame and we were not interrupted
+       by a signal.  We need to subtract one to get the correct block,
+       in case the call instruction was the last instruction of the block.
+       If there are any machines on which the saved pc does not point to
+       after the call insn, we probably want to make frame->pc point after
+       the call insn anyway.  */
+    --pc;
+  return block_for_pc (pc);
+}
+
+struct block *
+get_current_block ()
+{
+  return block_for_pc (read_pc ());
+}
+
+CORE_ADDR
+get_pc_function_start (pc)
+     CORE_ADDR pc;
+{
+  register struct block *bl;
+  register struct symbol *symbol;
+  register struct minimal_symbol *msymbol;
+  CORE_ADDR fstart;
+
+  if ((bl = block_for_pc (pc)) != NULL &&
+      (symbol = block_function (bl)) != NULL)
+    {
+      bl = SYMBOL_BLOCK_VALUE (symbol);
+      fstart = BLOCK_START (bl);
+    }
+  else if ((msymbol = lookup_minimal_symbol_by_pc (pc)) != NULL)
+    {
+      fstart = SYMBOL_VALUE_ADDRESS (msymbol);
+    }
+  else
+    {
+      fstart = 0;
+    }
+  return (fstart);
+}
+
+/* Return the symbol for the function executing in frame FRAME.  */
+
+struct symbol *
+get_frame_function (frame)
+     struct frame_info *frame;
+{
+  register struct block *bl = get_frame_block (frame);
+  if (bl == 0)
+    return 0;
+  return block_function (bl);
+}
+
+
+/* Return the blockvector immediately containing the innermost lexical block
+   containing the specified pc value and section, or 0 if there is none.
+   PINDEX is a pointer to the index value of the block.  If PINDEX
+   is NULL, we don't pass this information back to the caller.  */
+
+struct blockvector *
+blockvector_for_pc_sect (pc, section, pindex, symtab)
+     register CORE_ADDR pc;
+     struct sec *section;
+     int *pindex;
+     struct symtab *symtab;
+     
+{
+  register struct block *b;
+  register int bot, top, half;
+  struct blockvector *bl;
+
+  if (symtab == 0)	/* if no symtab specified by caller */
+    {
+      /* First search all symtabs for one whose file contains our pc */
+      if ((symtab = find_pc_sect_symtab (pc, section)) == 0)
+	return 0;
+    }
+
+  bl = BLOCKVECTOR (symtab);
+  b = BLOCKVECTOR_BLOCK (bl, 0);
+
+  /* Then search that symtab for the smallest block that wins.  */
+  /* Use binary search to find the last block that starts before PC.  */
+
+  bot = 0;
+  top = BLOCKVECTOR_NBLOCKS (bl);
+
+  while (top - bot > 1)
+    {
+      half = (top - bot + 1) >> 1;
+      b = BLOCKVECTOR_BLOCK (bl, bot + half);
+      if (BLOCK_START (b) <= pc)
+	bot += half;
+      else
+	top = bot + half;
+    }
+
+  /* Now search backward for a block that ends after PC.  */
+
+  while (bot >= 0)
+    {
+      b = BLOCKVECTOR_BLOCK (bl, bot);
+      if (BLOCK_END (b) >= pc)
+	{
+	  if (pindex)
+	    *pindex = bot;
+	  return bl;
+	}
+      bot--;
+    }
+  return 0;
+}
+
+/* Return the blockvector immediately containing the innermost lexical block
+   containing the specified pc value, or 0 if there is none.
+   Backward compatibility, no section.  */
+
+struct blockvector *
+blockvector_for_pc (pc, pindex)
+     register CORE_ADDR pc;
+     int *pindex;
+{
+  return blockvector_for_pc_sect (pc, find_pc_mapped_section (pc),
+				  pindex, NULL);
+}
+
+/* Return the innermost lexical block containing the specified pc value
+   in the specified section, or 0 if there is none.  */
+
+struct block *
+block_for_pc_sect (pc, section)
+     register CORE_ADDR pc;
+     struct sec *section;
+{
+  register struct blockvector *bl;
+  int index;
+
+  bl = blockvector_for_pc_sect (pc, section, &index, NULL);
+  if (bl)
+    return BLOCKVECTOR_BLOCK (bl, index);
+  return 0;
+}
+
+/* Return the innermost lexical block containing the specified pc value,
+   or 0 if there is none.  Backward compatibility, no section.  */
+
+struct block *
+block_for_pc (pc)
+     register CORE_ADDR pc;
+{
+  return block_for_pc_sect (pc, find_pc_mapped_section (pc));
+}
+
+/* Return the function containing pc value PC in section SECTION.
+   Returns 0 if function is not known.  */
+
+struct symbol *
+find_pc_sect_function (pc, section)
+     CORE_ADDR pc;
+     struct sec *section;
+{
+  register struct block *b = block_for_pc_sect (pc, section);
+  if (b == 0)
+    return 0;
+  return block_function (b);
+}
+
+/* Return the function containing pc value PC.
+   Returns 0 if function is not known.  Backward compatibility, no section */
+
+struct symbol *
+find_pc_function (pc)
+     CORE_ADDR pc;
+{
+  return find_pc_sect_function (pc, find_pc_mapped_section (pc));
+}
+
+/* These variables are used to cache the most recent result
+ * of find_pc_partial_function. */
+
+static CORE_ADDR   cache_pc_function_low     = 0;
+static CORE_ADDR   cache_pc_function_high    = 0;
+static char       *cache_pc_function_name    = 0;
+static struct sec *cache_pc_function_section = NULL;
+
+/* Clear cache, e.g. when symbol table is discarded. */
+
+void
+clear_pc_function_cache()
+{
+  cache_pc_function_low = 0;
+  cache_pc_function_high = 0;
+  cache_pc_function_name = (char *)0;
+  cache_pc_function_section = NULL;
+}
+
+/* Finds the "function" (text symbol) that is smaller than PC but
+   greatest of all of the potential text symbols in SECTION.  Sets
+   *NAME and/or *ADDRESS conditionally if that pointer is non-null.
+   If ENDADDR is non-null, then set *ENDADDR to be the end of the
+   function (exclusive), but passing ENDADDR as non-null means that
+   the function might cause symbols to be read.  This function either
+   succeeds or fails (not halfway succeeds).  If it succeeds, it sets
+   *NAME, *ADDRESS, and *ENDADDR to real information and returns 1.
+   If it fails, it sets *NAME, *ADDRESS, and *ENDADDR to zero and
+   returns 0.  */
+
+int
+find_pc_sect_partial_function (pc, section, name, address, endaddr)
+     CORE_ADDR  pc;
+     asection  *section;
+     char     **name;
+     CORE_ADDR *address;
+     CORE_ADDR *endaddr;
+{
+  struct partial_symtab *pst;
+  struct symbol         *f;
+  struct minimal_symbol *msymbol;
+  struct partial_symbol *psb;
+  struct obj_section    *osect;
+  int i;
+  CORE_ADDR mapped_pc;
+
+  mapped_pc = overlay_mapped_address (pc, section);
+
+  if (mapped_pc >= cache_pc_function_low && 
+      mapped_pc < cache_pc_function_high &&
+      section == cache_pc_function_section)
+    goto return_cached_value;
+
+  /* If sigtramp is in the u area, it counts as a function (especially
+     important for step_1).  */
+#if defined SIGTRAMP_START
+  if (IN_SIGTRAMP (mapped_pc, (char *)NULL))
+    {
+      cache_pc_function_low     = SIGTRAMP_START (mapped_pc);
+      cache_pc_function_high    = SIGTRAMP_END (mapped_pc);
+      cache_pc_function_name    = "<sigtramp>";
+      cache_pc_function_section = section;
+      goto return_cached_value;
+    }
+#endif
+
+  msymbol = lookup_minimal_symbol_by_pc_section (mapped_pc, section);
+  pst = find_pc_sect_psymtab (mapped_pc, section);
+  if (pst)
+    {
+      /* Need to read the symbols to get a good value for the end address.  */
+      if (endaddr != NULL && !pst->readin)
+	{
+	  /* Need to get the terminal in case symbol-reading produces
+	     output.  */
+	  target_terminal_ours_for_output ();
+	  PSYMTAB_TO_SYMTAB (pst);
+	}
+
+      if (pst->readin)
+	{
+	  /* Checking whether the msymbol has a larger value is for the
+	     "pathological" case mentioned in print_frame_info.  */
+	  f = find_pc_sect_function (mapped_pc, section);
+	  if (f != NULL
+	      && (msymbol == NULL
+		  || (BLOCK_START (SYMBOL_BLOCK_VALUE (f))
+		      >= SYMBOL_VALUE_ADDRESS (msymbol))))
+	    {
+	      cache_pc_function_low     = BLOCK_START (SYMBOL_BLOCK_VALUE (f));
+	      cache_pc_function_high    = BLOCK_END   (SYMBOL_BLOCK_VALUE (f));
+	      cache_pc_function_name    = SYMBOL_NAME (f);
+	      cache_pc_function_section = section;
+	      goto return_cached_value;
+	    }
+	}
+      else
+	{
+	  /* Now that static symbols go in the minimal symbol table, perhaps
+	     we could just ignore the partial symbols.  But at least for now
+	     we use the partial or minimal symbol, whichever is larger.  */
+	  psb = find_pc_sect_psymbol (pst, mapped_pc, section);
+
+	  if (psb
+	      && (msymbol == NULL ||
+		  (SYMBOL_VALUE_ADDRESS (psb)
+		   >= SYMBOL_VALUE_ADDRESS (msymbol))))
+	    {
+	      /* This case isn't being cached currently. */
+	      if (address)
+		*address = SYMBOL_VALUE_ADDRESS (psb);
+	      if (name)
+		*name = SYMBOL_NAME (psb);
+	      /* endaddr non-NULL can't happen here.  */
+	      return 1;
+	    }
+	}
+    }
+
+  /* Not in the normal symbol tables, see if the pc is in a known section.
+     If it's not, then give up.  This ensures that anything beyond the end
+     of the text seg doesn't appear to be part of the last function in the
+     text segment.  */
+
+  osect = find_pc_sect_section (mapped_pc, section);
+
+  if (!osect)
+    msymbol = NULL;
+
+  /* Must be in the minimal symbol table.  */
+  if (msymbol == NULL)
+    {
+      /* No available symbol.  */
+      if (name != NULL)
+	*name = 0;
+      if (address != NULL)
+	*address = 0;
+      if (endaddr != NULL)
+	*endaddr = 0;
+      return 0;
+    }
+
+  cache_pc_function_low     = SYMBOL_VALUE_ADDRESS (msymbol);
+  cache_pc_function_name    = SYMBOL_NAME (msymbol);
+  cache_pc_function_section = section;
+
+  /* Use the lesser of the next minimal symbol in the same section, or
+     the end of the section, as the end of the function.  */
+  
+  /* Step over other symbols at this same address, and symbols in
+     other sections, to find the next symbol in this section with
+     a different address.  */
+
+  for (i=1; SYMBOL_NAME (msymbol+i) != NULL; i++)
+    {
+      if (SYMBOL_VALUE_ADDRESS (msymbol+i) != SYMBOL_VALUE_ADDRESS (msymbol) 
+	  && SYMBOL_BFD_SECTION (msymbol+i) == SYMBOL_BFD_SECTION (msymbol))
+	break;
+    }
+
+  if (SYMBOL_NAME (msymbol + i) != NULL
+      && SYMBOL_VALUE_ADDRESS (msymbol + i) < osect->endaddr)
+    cache_pc_function_high = SYMBOL_VALUE_ADDRESS (msymbol + i);
+  else
+    /* We got the start address from the last msymbol in the objfile.
+       So the end address is the end of the section.  */
+    cache_pc_function_high = osect->endaddr;
+
+ return_cached_value:
+
+  if (address)
+    {
+      if (pc_in_unmapped_range (pc, section))
+        *address = overlay_unmapped_address (cache_pc_function_low, section);
+      else
+        *address = cache_pc_function_low;
+    }
+    
+  if (name)
+    *name = cache_pc_function_name;
+
+  if (endaddr)
+    {
+      if (pc_in_unmapped_range (pc, section))
+        {
+	  /* Because the high address is actually beyond the end of
+	     the function (and therefore possibly beyond the end of
+	     the overlay), we must actually convert (high - 1)
+	     and then add one to that. */
+
+	  *endaddr = 1 + overlay_unmapped_address (cache_pc_function_high - 1, 
+						   section);
+        }
+      else
+        *endaddr = cache_pc_function_high;
+    }
+
+  return 1;
+}
+
+/* Backward compatibility, no section argument */
+
+int
+find_pc_partial_function (pc, name, address, endaddr)
+     CORE_ADDR  pc;
+     char     **name;
+     CORE_ADDR *address;
+     CORE_ADDR *endaddr;
+{
+  asection     *section;
+
+  section = find_pc_overlay (pc);
+  return find_pc_sect_partial_function (pc, section, name, address, endaddr);
+}
+
+/* Return the innermost stack frame executing inside of BLOCK,
+   or NULL if there is no such frame.  If BLOCK is NULL, just return NULL.  */
+
+struct frame_info *
+block_innermost_frame (block)
+     struct block *block;
+{
+  struct frame_info *frame;
+  register CORE_ADDR start;
+  register CORE_ADDR end;
+
+  if (block == NULL)
+    return NULL;
+
+  start = BLOCK_START (block);
+  end = BLOCK_END (block);
+
+  frame = NULL;
+  while (1)
+    {
+      frame = get_prev_frame (frame);
+      if (frame == NULL)
+	return NULL;
+      if (frame->pc >= start && frame->pc < end)
+	return frame;
+    }
+}
+
+/* Return the full FRAME which corresponds to the given CORE_ADDR
+   or NULL if no FRAME on the chain corresponds to CORE_ADDR.  */
+
+struct frame_info *
+find_frame_addr_in_frame_chain (frame_addr)
+     CORE_ADDR frame_addr;
+{
+  struct frame_info *frame = NULL;
+
+  if (frame_addr == (CORE_ADDR)0)
+    return NULL;
+
+  while (1)
+    {
+      frame = get_prev_frame (frame);
+      if (frame == NULL)
+	return NULL;
+      if (FRAME_FP (frame) == frame_addr)
+	return frame;
+    }
+}
+
+#ifdef SIGCONTEXT_PC_OFFSET
+/* Get saved user PC for sigtramp from sigcontext for BSD style sigtramp.  */
+
+CORE_ADDR
+sigtramp_saved_pc (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR sigcontext_addr;
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  int ptrbytes = TARGET_PTR_BIT / TARGET_CHAR_BIT;
+  int sigcontext_offs = (2 * TARGET_INT_BIT) / TARGET_CHAR_BIT;
+
+  /* Get sigcontext address, it is the third parameter on the stack.  */
+  if (frame->next)
+    sigcontext_addr = read_memory_integer (FRAME_ARGS_ADDRESS (frame->next)
+					   + FRAME_ARGS_SKIP
+					   + sigcontext_offs,
+					   ptrbytes);
+  else
+    sigcontext_addr = read_memory_integer (read_register (SP_REGNUM)
+					    + sigcontext_offs,
+					   ptrbytes);
+
+  /* Don't cause a memory_error when accessing sigcontext in case the stack
+     layout has changed or the stack is corrupt.  */
+  target_read_memory (sigcontext_addr + SIGCONTEXT_PC_OFFSET, buf, ptrbytes);
+  return extract_unsigned_integer (buf, ptrbytes);
+}
+#endif /* SIGCONTEXT_PC_OFFSET */
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+
+/*
+ * GENERIC DUMMY FRAMES
+ * 
+ * The following code serves to maintain the dummy stack frames for
+ * inferior function calls (ie. when gdb calls into the inferior via
+ * call_function_by_hand).  This code saves the machine state before 
+ * the call in host memory, so we must maintain an independant stack 
+ * and keep it consistant etc.  I am attempting to make this code 
+ * generic enough to be used by many targets.
+ *
+ * The cheapest and most generic way to do CALL_DUMMY on a new target
+ * is probably to define CALL_DUMMY to be empty, CALL_DUMMY_LENGTH to
+ * zero, and CALL_DUMMY_LOCATION to AT_ENTRY.  Then you must remember
+ * to define PUSH_RETURN_ADDRESS, because no call instruction will be
+ * being executed by the target.  Also FRAME_CHAIN_VALID as
+ * generic_frame_chain_valid.  */
+
+static struct dummy_frame *dummy_frame_stack = NULL;
+
+/* Function: find_dummy_frame(pc, fp, sp)
+   Search the stack of dummy frames for one matching the given PC, FP and SP.
+   This is the work-horse for pc_in_call_dummy and read_register_dummy     */
+
+char * 
+generic_find_dummy_frame (pc, fp)
+     CORE_ADDR pc;
+     CORE_ADDR fp;
+{
+  struct dummy_frame * dummyframe;
+
+  if (pc != entry_point_address ())
+    return 0;
+
+  for (dummyframe = dummy_frame_stack; dummyframe != NULL;
+       dummyframe = dummyframe->next)
+    if (fp == dummyframe->fp || fp == dummyframe->sp)
+      /* The frame in question lies between the saved fp and sp, inclusive */
+      return dummyframe->regs;
+
+  return 0;
+}
+
+/* Function: pc_in_call_dummy (pc, fp)
+   Return true if this is a dummy frame created by gdb for an inferior call */
+
+int
+generic_pc_in_call_dummy (pc, fp)
+     CORE_ADDR pc;
+     CORE_ADDR fp;
+{
+  /* if find_dummy_frame succeeds, then PC is in a call dummy */
+  return (generic_find_dummy_frame (pc, fp) != 0);
+}
+
+/* Function: read_register_dummy 
+   Find a saved register from before GDB calls a function in the inferior */
+
+CORE_ADDR
+generic_read_register_dummy (pc, fp, regno)
+     CORE_ADDR pc;
+     CORE_ADDR fp;
+     int regno;
+{
+  char *dummy_regs = generic_find_dummy_frame (pc, fp);
+
+  if (dummy_regs)
+    return extract_address (&dummy_regs[REGISTER_BYTE (regno)],
+			    REGISTER_RAW_SIZE(regno));
+  else
+    return 0;
+}
+
+/* Save all the registers on the dummy frame stack.  Most ports save the
+   registers on the target stack.  This results in lots of unnecessary memory
+   references, which are slow when debugging via a serial line.  Instead, we
+   save all the registers internally, and never write them to the stack.  The
+   registers get restored when the called function returns to the entry point,
+   where a breakpoint is laying in wait.  */
+
+void
+generic_push_dummy_frame ()
+{
+  struct dummy_frame *dummy_frame;
+  CORE_ADDR fp = (get_current_frame ())->frame;
+
+  /* check to see if there are stale dummy frames, 
+     perhaps left over from when a longjump took us out of a 
+     function that was called by the debugger */
+
+  dummy_frame = dummy_frame_stack;
+  while (dummy_frame)
+    if (INNER_THAN (dummy_frame->fp, fp))	/* stale -- destroy! */
+      {
+	dummy_frame_stack = dummy_frame->next;
+	free (dummy_frame);
+	dummy_frame = dummy_frame_stack;
+      }
+    else
+      dummy_frame = dummy_frame->next;
+
+  dummy_frame = xmalloc (sizeof (struct dummy_frame));
+  dummy_frame->pc   = read_register (PC_REGNUM);
+  dummy_frame->sp   = read_register (SP_REGNUM);
+  dummy_frame->fp   = fp;
+  read_register_bytes (0, dummy_frame->regs, REGISTER_BYTES);
+  dummy_frame->next = dummy_frame_stack;
+  dummy_frame_stack = dummy_frame;
+}
+
+/* Function: pop_frame
+   Restore the machine state from either the saved dummy stack or a
+   real stack frame. */
+
+void
+generic_pop_current_frame (pop)
+  void (*pop) PARAMS ((struct frame_info *frame));
+{
+  struct frame_info *frame = get_current_frame ();
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    pop (frame);
+}
+
+/* Function: pop_dummy_frame
+   Restore the machine state from a saved dummy stack frame. */
+
+void
+generic_pop_dummy_frame ()
+{
+  struct dummy_frame *dummy_frame = dummy_frame_stack;
+
+  /* FIXME: what if the first frame isn't the right one, eg..
+     because one call-by-hand function has done a longjmp into another one? */
+
+  if (!dummy_frame)
+    error ("Can't pop dummy frame!");
+  dummy_frame_stack = dummy_frame->next;
+  write_register_bytes (0, dummy_frame->regs, REGISTER_BYTES);
+  flush_cached_frames ();
+  free (dummy_frame);
+}
+
+/* Function: frame_chain_valid 
+   Returns true for a user frame or a call_function_by_hand dummy frame,
+   and false for the CRT0 start-up frame.  Purpose is to terminate backtrace */
+ 
+int
+generic_frame_chain_valid (fp, fi)
+     CORE_ADDR fp;
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(FRAME_SAVED_PC(fi), fp, fp))
+    return 1;   /* don't prune CALL_DUMMY frames */
+  else          /* fall back to default algorithm (see frame.h) */
+    return (fp != 0
+	    && (INNER_THAN (fi->frame, fp) || fi->frame == fp)
+	    && !inside_entry_file (FRAME_SAVED_PC(fi)));
+}
+ 
+/* Function: get_saved_register
+   Find register number REGNUM relative to FRAME and put its (raw,
+   target format) contents in *RAW_BUFFER.  
+
+   Set *OPTIMIZED if the variable was optimized out (and thus can't be
+   fetched).  Note that this is never set to anything other than zero
+   in this implementation.
+
+   Set *LVAL to lval_memory, lval_register, or not_lval, depending on
+   whether the value was fetched from memory, from a register, or in a
+   strange and non-modifiable way (e.g. a frame pointer which was
+   calculated rather than fetched).  We will use not_lval for values
+   fetched from generic dummy frames.
+
+   Set *ADDRP to the address, either in memory on as a REGISTER_BYTE
+   offset into the registers array.  If the value is stored in a dummy
+   frame, set *ADDRP to zero.
+
+   To use this implementation, define a function called
+   "get_saved_register" in your target code, which simply passes all
+   of its arguments to this function.
+
+   The argument RAW_BUFFER must point to aligned memory.  */
+
+void
+generic_get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  if (!target_has_registers)
+    error ("No registers.");
+
+  /* Normal systems don't optimize out things with register numbers.  */
+  if (optimized != NULL)
+    *optimized = 0;
+
+  if (addrp)		/* default assumption: not found in memory */
+    *addrp = 0;
+
+  /* Note: since the current frame's registers could only have been
+     saved by frames INTERIOR TO the current frame, we skip examining
+     the current frame itself: otherwise, we would be getting the
+     previous frame's registers which were saved by the current frame.  */
+
+  while (frame && ((frame = frame->next) != NULL))
+    {
+      if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+	{
+	  if (lval)			/* found it in a CALL_DUMMY frame */
+	    *lval = not_lval;
+	  if (raw_buffer)
+	    memcpy (raw_buffer, 
+		    generic_find_dummy_frame (frame->pc, frame->frame) + 
+		    REGISTER_BYTE (regnum),
+		    REGISTER_RAW_SIZE (regnum));
+	      return;
+	}
+
+      FRAME_INIT_SAVED_REGS (frame);
+      if (frame->saved_regs != NULL
+	  && frame->saved_regs[regnum] != 0)
+	{
+	  if (lval)			/* found it saved on the stack */
+	    *lval = lval_memory;
+	  if (regnum == SP_REGNUM)
+	    {
+	      if (raw_buffer)		/* SP register treated specially */
+		store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), 
+			       frame->saved_regs[regnum]);
+	    }
+	  else
+	    {
+	      if (addrp)		/* any other register */
+		*addrp = frame->saved_regs[regnum];
+	      if (raw_buffer)
+		read_memory (frame->saved_regs[regnum], raw_buffer, 
+			     REGISTER_RAW_SIZE (regnum));
+	    }
+	  return;
+	}
+    }
+
+  /* If we get thru the loop to this point, it means the register was
+     not saved in any frame.  Return the actual live-register value.  */
+
+  if (lval)				/* found it in a live register */
+    *lval = lval_register;
+  if (addrp)
+    *addrp = REGISTER_BYTE (regnum);
+  if (raw_buffer)
+    read_register_gen (regnum, raw_buffer);
+}
+#endif /* USE_GENERIC_DUMMY_FRAMES */
+
+void
+_initialize_blockframe ()
+{
+  obstack_init (&frame_cache_obstack);
+}
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
new file mode 100644
index 0000000..4b05949
--- /dev/null
+++ b/gdb/breakpoint.c
@@ -0,0 +1,6686 @@
+/* Everything about breakpoints, for GDB.
+   Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "value.h"
+#include "command.h"
+#include "inferior.h"
+#include "gdbthread.h"
+#include "target.h"
+#include "language.h"
+#include "gdb_string.h"
+#include "demangle.h"
+#include "annotate.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+/* Prototypes for local functions. */
+
+static void
+catch_command_1 PARAMS ((char *, int, int));
+
+static void
+enable_delete_command PARAMS ((char *, int));
+
+static void
+enable_delete_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+enable_once_command PARAMS ((char *, int));
+
+static void
+enable_once_breakpoint PARAMS ((struct breakpoint *));
+
+static void
+disable_command PARAMS ((char *, int));
+
+static void
+enable_command PARAMS ((char *, int));
+
+static void
+map_breakpoint_numbers PARAMS ((char *,	void (*)(struct breakpoint *)));
+
+static void
+ignore_command PARAMS ((char *, int));
+
+static int breakpoint_re_set_one PARAMS ((PTR));
+
+static void
+clear_command PARAMS ((char *, int));
+
+static void
+catch_command PARAMS ((char *, int));
+
+static void
+handle_gnu_4_16_catch_command PARAMS ((char *, int, int));
+
+static struct symtabs_and_lines
+get_catch_sals PARAMS ((int));
+
+static void
+watch_command PARAMS ((char *, int));
+
+static int
+can_use_hardware_watchpoint PARAMS ((struct value *));
+
+void
+tbreak_command PARAMS ((char *, int));
+
+static void
+break_command_1 PARAMS ((char *, int, int));
+
+static void
+mention PARAMS ((struct breakpoint *));
+
+struct breakpoint *
+set_raw_breakpoint PARAMS ((struct symtab_and_line));
+
+static void
+check_duplicates PARAMS ((CORE_ADDR, asection *));
+
+static void
+describe_other_breakpoints PARAMS ((CORE_ADDR, asection *));
+
+static void
+breakpoints_info PARAMS ((char *, int));
+
+static void
+breakpoint_1 PARAMS ((int, int));
+
+static bpstat
+bpstat_alloc PARAMS ((struct breakpoint *, bpstat));
+
+static int breakpoint_cond_eval PARAMS ((PTR));
+
+static void
+cleanup_executing_breakpoints PARAMS ((PTR));
+
+static void
+commands_command PARAMS ((char *, int));
+
+static void
+condition_command PARAMS ((char *, int));
+
+static int
+get_number PARAMS ((char **));
+
+void
+set_breakpoint_count PARAMS ((int));
+
+#if 0
+static struct breakpoint *
+create_temp_exception_breakpoint PARAMS ((CORE_ADDR));
+#endif
+
+typedef enum {
+  mark_inserted,
+  mark_uninserted
+} insertion_state_t;
+
+static int
+remove_breakpoint PARAMS ((struct breakpoint *, insertion_state_t));
+
+static int print_it_normal PARAMS ((bpstat));
+
+typedef struct {
+  enum exception_event_kind kind;
+  int enable;
+} args_for_catchpoint_enable;
+
+static int watchpoint_check PARAMS ((PTR));
+
+static int cover_target_enable_exception_callback PARAMS ((PTR));
+
+static int print_it_done PARAMS ((bpstat));
+
+static int print_it_noop PARAMS ((bpstat));
+
+static void maintenance_info_breakpoints PARAMS ((char *, int));
+
+#ifdef GET_LONGJMP_TARGET
+static void create_longjmp_breakpoint PARAMS ((char *));
+#endif
+
+static int hw_breakpoint_used_count PARAMS ((void));
+
+static int hw_watchpoint_used_count PARAMS ((enum bptype, int *));
+
+static void hbreak_command PARAMS ((char *, int));
+
+static void thbreak_command PARAMS ((char *, int));
+
+static void watch_command_1 PARAMS ((char *, int, int));
+
+static void rwatch_command PARAMS ((char *, int));
+
+static void awatch_command PARAMS ((char *, int));
+
+static void do_enable_breakpoint PARAMS ((struct breakpoint *, enum bpdisp));
+
+/* Prototypes for exported functions. */
+
+static void
+awatch_command PARAMS ((char *, int));
+
+static void
+do_enable_breakpoint PARAMS ((struct breakpoint *, enum bpdisp));
+
+/* If FALSE, gdb will not use hardware support for watchpoints, even
+   if such is available. */
+static int can_use_hw_watchpoints;
+
+void delete_command PARAMS ((char *, int));
+
+void _initialize_breakpoint PARAMS ((void));
+
+void set_breakpoint_count PARAMS ((int));
+
+extern int addressprint;		/* Print machine addresses? */
+
+#if defined (GET_LONGJMP_TARGET) || defined (SOLIB_ADD)
+static int internal_breakpoint_number = -1;
+#endif
+
+/* Are we executing breakpoint commands?  */
+static int executing_breakpoint_commands;
+
+/* Walk the following statement or block through all breakpoints.
+   ALL_BREAKPOINTS_SAFE does so even if the statment deletes the current
+   breakpoint.  */
+
+#define ALL_BREAKPOINTS(b)  for (b = breakpoint_chain; b; b = b->next)
+
+#define ALL_BREAKPOINTS_SAFE(b,tmp)	\
+	for (b = breakpoint_chain;	\
+	     b? (tmp=b->next, 1): 0;	\
+	     b = tmp)
+
+/* True if SHIFT_INST_REGS defined, false otherwise.  */
+
+int must_shift_inst_regs =
+#if defined(SHIFT_INST_REGS)
+1
+#else
+0
+#endif
+;
+
+/* True if breakpoint hit counts should be displayed in breakpoint info.  */
+
+int show_breakpoint_hit_counts = 1;
+
+/* Chain of all breakpoints defined.  */
+
+struct breakpoint *breakpoint_chain;
+
+/* Number of last breakpoint made.  */
+
+int breakpoint_count;
+
+/* Pointer to current exception event record */ 
+static struct exception_event_record * current_exception_event;
+
+/* Indicator of whether exception catchpoints should be nuked
+   between runs of a program */
+int exception_catchpoints_are_fragile = 0;
+ 
+/* Indicator of when exception catchpoints set-up should be
+   reinitialized -- e.g. when program is re-run */
+int exception_support_initialized = 0;
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been
+   loaded.
+
+   This function must be used only when SOLIB_HAVE_LOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the
+   inferior has stopped in the dynamic linker hook, and becomes
+   invalid as soon as the inferior is continued.  Clients should make
+   a copy of this string if they wish to continue the inferior and
+   then access the string.  */
+
+#ifndef SOLIB_LOADED_LIBRARY_PATHNAME
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) ""
+#endif
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been
+   unloaded.
+
+   This function must be used only when SOLIB_HAVE_UNLOAD_EVENT is
+   TRUE, or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the
+   inferior has stopped in the dynamic linker hook, and becomes
+   invalid as soon as the inferior is continued.  Clients should make
+   a copy of this string if they wish to continue the inferior and
+   then access the string.  */
+
+#ifndef SOLIB_UNLOADED_LIBRARY_PATHNAME
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) ""
+#endif
+
+/* This function is called by the "catch load" command.  It allows the
+   debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is loaded.  */
+
+#ifndef SOLIB_CREATE_CATCH_LOAD_HOOK
+#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error ("catch of library loads not yet implemented on this platform")
+#endif
+
+/* This function is called by the "catch unload" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is
+   unloaded.  */
+
+#ifndef SOLIB_CREATE_CATCH_UNLOAD_HOOK
+#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error ("catch of library unloads not yet implemented on this platform")
+#endif
+
+/* Set breakpoint count to NUM.  */
+
+void
+set_breakpoint_count (num)
+     int num;
+{
+  breakpoint_count = num;
+  set_internalvar (lookup_internalvar ("bpnum"),
+		   value_from_longest (builtin_type_int, (LONGEST) num));
+}
+
+/* Used in run_command to zero the hit count when a new run starts. */
+
+void
+clear_breakpoint_hit_counts ()
+{
+  struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    b->hit_count = 0;
+}
+
+/* Default address, symtab and line to put a breakpoint at
+   for "break" command with no arg.
+   if default_breakpoint_valid is zero, the other three are
+   not valid, and "break" with no arg is an error.
+
+   This set by print_stack_frame, which calls set_default_breakpoint.  */
+
+int default_breakpoint_valid;
+CORE_ADDR default_breakpoint_address;
+struct symtab *default_breakpoint_symtab;
+int default_breakpoint_line;
+
+/* *PP is a string denoting a breakpoint.  Get the number of the breakpoint.
+   Advance *PP after the string and any trailing whitespace.
+
+   Currently the string can either be a number or "$" followed by the name
+   of a convenience variable.  Making it an expression wouldn't work well
+   for map_breakpoint_numbers (e.g. "4 + 5 + 6").  */
+static int
+get_number (pp)
+     char **pp;
+{
+  int retval;
+  char *p = *pp;
+
+  if (p == NULL)
+    /* Empty line means refer to the last breakpoint.  */
+    return breakpoint_count;
+  else if (*p == '$')
+    {
+      /* Make a copy of the name, so we can null-terminate it
+	 to pass to lookup_internalvar().  */
+      char *varname;
+      char *start = ++p;
+      value_ptr val;
+
+      while (isalnum (*p) || *p == '_')
+	p++;
+      varname = (char *) alloca (p - start + 1);
+      strncpy (varname, start, p - start);
+      varname[p - start] = '\0';
+      val = value_of_internalvar (lookup_internalvar (varname));
+      if (TYPE_CODE (VALUE_TYPE (val)) != TYPE_CODE_INT)
+	error (
+"Convenience variables used to specify breakpoints must have integer values."
+	       );
+      retval = (int) value_as_long (val);
+    }
+  else
+    {
+      if (*p == '-')
+	++p;
+      while (*p >= '0' && *p <= '9')
+	++p;
+      if (p == *pp)
+	/* There is no number here.  (e.g. "cond a == b").  */
+	error_no_arg ("breakpoint number");
+      retval = atoi (*pp);
+    }
+  if (!(isspace (*p) || *p == '\0'))
+    error ("breakpoint number expected");
+  while (isspace (*p))
+    p++;
+  *pp = p;
+  return retval;
+}
+
+/* condition N EXP -- set break condition of breakpoint N to EXP.  */
+
+static void
+condition_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register struct breakpoint *b;
+  char *p;
+  register int bnum;
+
+  if (arg == 0)
+    error_no_arg ("breakpoint number");
+
+  p = arg;
+  bnum = get_number (&p);
+
+  ALL_BREAKPOINTS (b)
+    if (b->number == bnum)
+      {
+	if (b->cond)
+	  {
+	    free ((PTR)b->cond);
+	    b->cond = 0;
+	  }
+	if (b->cond_string != NULL)
+	  free ((PTR)b->cond_string);
+
+	if (*p == 0)
+	  {
+	    b->cond = 0;
+	    b->cond_string = NULL;
+	    if (from_tty)
+	      printf_filtered ("Breakpoint %d now unconditional.\n", bnum);
+	  }
+	else
+	  {
+	    arg = p;
+	    /* I don't know if it matters whether this is the string the user
+	       typed in or the decompiled expression.  */
+	    b->cond_string = savestring (arg, strlen (arg));
+	    b->cond = parse_exp_1 (&arg, block_for_pc (b->address), 0);
+	    if (*arg)
+	      error ("Junk at end of expression");
+	  }
+	breakpoints_changed ();
+	return;
+      }
+
+  error ("No breakpoint number %d.", bnum);
+}
+
+/* ARGSUSED */
+static void
+commands_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register struct breakpoint *b;
+  char *p;
+  register int bnum;
+  struct command_line *l;
+
+  /* If we allowed this, we would have problems with when to
+     free the storage, if we change the commands currently
+     being read from.  */
+
+  if (executing_breakpoint_commands)
+    error ("Can't use the \"commands\" command among a breakpoint's commands.");
+
+  p = arg;
+  bnum = get_number (&p);
+  if (p && *p)
+    error ("Unexpected extra arguments following breakpoint number.");
+      
+  ALL_BREAKPOINTS (b)
+    if (b->number == bnum)
+      {
+	char tmpbuf[128];
+	sprintf (tmpbuf, "Type commands for when breakpoint %d is hit, one per line.", bnum);
+	l = read_command_lines (tmpbuf, from_tty);
+	free_command_lines (&b->commands);
+	b->commands = l;
+	breakpoints_changed ();
+	return;
+      }
+  error ("No breakpoint number %d.", bnum);
+}
+
+/* Like target_read_memory() but if breakpoints are inserted, return
+   the shadow contents instead of the breakpoints themselves.
+
+   Read "memory data" from whatever target or inferior we have. 
+   Returns zero if successful, errno value if not.  EIO is used
+   for address out of bounds.  If breakpoints are inserted, returns
+   shadow contents, not the breakpoints themselves.  From breakpoint.c.  */
+
+int
+read_memory_nobpt (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     unsigned len;
+{
+  int status;
+  struct breakpoint *b;
+  CORE_ADDR bp_addr = 0;
+  int bp_size = 0;
+
+  if (BREAKPOINT_FROM_PC (&bp_addr, &bp_size) == NULL)
+    /* No breakpoints on this machine. */
+    return target_read_memory (memaddr, myaddr, len);
+  
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->type == bp_none)
+        warning ("attempted to read through apparently deleted breakpoint #%d?\n", b->number);
+
+      /* memory breakpoint? */
+      if (b->type == bp_watchpoint
+	  || b->type == bp_hardware_watchpoint
+	  || b->type == bp_read_watchpoint
+	  || b->type == bp_access_watchpoint)
+	continue;
+      /* bp in memory? */
+      if (!b->inserted)
+	continue;
+      /* Addresses and length of the part of the breakpoint that
+	 we need to copy.  */
+      /* XXXX The m68k, sh and h8300 have different local and remote
+	 breakpoint values.  BREAKPOINT_FROM_PC still manages to
+	 correctly determine the breakpoints memory address and size
+	 for these targets. */
+      bp_addr = b->address;
+      bp_size = 0;
+      if (BREAKPOINT_FROM_PC (&bp_addr, &bp_size) == NULL)
+	continue;
+      if (bp_size == 0)
+	/* bp isn't valid */
+	continue;
+      if (bp_addr + bp_size <= memaddr)
+	/* The breakpoint is entirely before the chunk of memory we
+	   are reading.  */
+	continue;
+      if (bp_addr >= memaddr + len)
+	/* The breakpoint is entirely after the chunk of memory we are
+	   reading. */
+	continue;
+      /* Copy the breakpoint from the shadow contents, and recurse for
+	 the things before and after.  */
+      {
+	/* Offset within shadow_contents.  */
+	int bptoffset = 0;
+	  
+	if (bp_addr < memaddr)
+	  {
+	    /* Only copy the second part of the breakpoint.  */
+	    bp_size -= memaddr - bp_addr;
+	    bptoffset = memaddr - bp_addr;
+	    bp_addr = memaddr;
+	  }
+	
+	if (bp_addr + bp_size > memaddr + len)
+	  {
+	    /* Only copy the first part of the breakpoint.  */
+	    bp_size -= (bp_addr + bp_size) - (memaddr + len);
+	  }
+	
+	memcpy (myaddr + bp_addr - memaddr, 
+		b->shadow_contents + bptoffset, bp_size);
+	
+	if (bp_addr > memaddr)
+	  {
+	    /* Copy the section of memory before the breakpoint.  */
+	    status = read_memory_nobpt (memaddr, myaddr, bp_addr - memaddr);
+	    if (status != 0)
+	      return status;
+	  }
+	
+	if (bp_addr + bp_size < memaddr + len)
+	  {
+	    /* Copy the section of memory after the breakpoint.  */
+	    status = read_memory_nobpt
+	      (bp_addr + bp_size,
+	       myaddr + bp_addr + bp_size - memaddr,
+	       memaddr + len - (bp_addr + bp_size));
+	    if (status != 0)
+	      return status;
+	  }
+	return 0;
+      }
+    }
+  /* Nothing overlaps.  Just call read_memory_noerr.  */
+  return target_read_memory (memaddr, myaddr, len);
+}
+
+
+/* insert_breakpoints is used when starting or continuing the program.
+   remove_breakpoints is used when the program stops.
+   Both return zero if successful,
+   or an `errno' value if could not write the inferior.  */
+
+int
+insert_breakpoints ()
+{
+  register struct breakpoint *b, *temp;
+  int val = 0;
+  int disabled_breaks = 0;
+
+  static char message1[] = "Error inserting catchpoint %d:\n";
+  static char message[sizeof (message1) + 30];
+
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      if (b->type != bp_watchpoint
+	  && b->type != bp_hardware_watchpoint
+	  && b->type != bp_read_watchpoint
+	  && b->type != bp_access_watchpoint
+	  && b->type != bp_catch_fork
+	  && b->type != bp_catch_vfork
+	  && b->type != bp_catch_exec
+          && b->type != bp_catch_throw
+          && b->type != bp_catch_catch
+	  && b->enable != disabled
+	  && b->enable != shlib_disabled
+          && b->enable != call_disabled
+	  && ! b->inserted
+	  && ! b->duplicate)
+	{
+	  if (b->type == bp_hardware_breakpoint)
+	    val = target_insert_hw_breakpoint(b->address, b->shadow_contents);
+	  else
+	    {
+	      /* Check to see if breakpoint is in an overlay section;
+		 if so, we should set the breakpoint at the LMA address.
+		 Only if the section is currently mapped should we ALSO
+		 set a break at the VMA address. */
+	      if (overlay_debugging && b->section &&
+		  section_is_overlay (b->section))
+		{
+		  CORE_ADDR addr;
+
+		  addr = overlay_unmapped_address (b->address, b->section);
+		  val = target_insert_breakpoint (addr, b->shadow_contents);
+		  /* This would be the time to check val, to see if the
+		     breakpoint write to the load address succeeded.  
+		     However, this might be an ordinary occurrance, eg. if 
+		     the unmapped overlay is in ROM.  */
+		  val = 0;	/* in case unmapped address failed */
+		  if (section_is_mapped (b->section))
+		    val = target_insert_breakpoint (b->address, 
+						    b->shadow_contents);
+		}
+	      else /* ordinary (non-overlay) address */
+		val = target_insert_breakpoint(b->address, b->shadow_contents);
+	    }
+	  if (val)
+	    {
+	      /* Can't set the breakpoint.  */
+#if defined (DISABLE_UNSETTABLE_BREAK)
+	      if (DISABLE_UNSETTABLE_BREAK (b->address))
+		{
+                  /* See also: disable_breakpoints_in_shlibs. */
+		  val = 0;
+		  b->enable = shlib_disabled;
+		  if (!disabled_breaks)
+		    {
+		      target_terminal_ours_for_output ();
+		      fprintf_unfiltered (gdb_stderr,
+					  "Cannot insert breakpoint %d:\n", b->number);
+		      printf_filtered ("Temporarily disabling shared library breakpoints:\n");
+		    }
+		  disabled_breaks = 1;
+		  printf_filtered ("%d ", b->number);
+		}
+	      else
+#endif
+		{
+		  target_terminal_ours_for_output ();
+		  fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+#ifdef ONE_PROCESS_WRITETEXT
+		  fprintf_unfiltered (gdb_stderr,
+				      "The same program may be running in another process.\n");
+#endif
+		  memory_error (val, b->address);	/* which bombs us out */
+		}
+	    }
+	  else
+            b->inserted = 1;
+       }
+    else if (ep_is_exception_catchpoint (b)
+             && b->enable != disabled
+             && b->enable != shlib_disabled
+             && b->enable != call_disabled
+             && ! b->inserted
+             && ! b->duplicate)
+
+      {
+         /* If we get here, we must have a callback mechanism for exception
+            events -- with g++ style embedded label support, we insert
+            ordinary breakpoints and not catchpoints. */ 
+        sprintf (message, message1, b->number); /* Format possible error message */
+ 
+        val = target_insert_breakpoint(b->address, b->shadow_contents);
+        if (val)
+          {
+           /* Couldn't set breakpoint for some reason */ 
+           target_terminal_ours_for_output ();
+           fprintf_unfiltered (gdb_stderr,
+                        "Cannot insert catchpoint %d; disabling it\n", b->number);
+           b->enable = disabled;
+          }
+        else
+          {
+              /* Bp set, now make sure callbacks are enabled */ 
+	    int val;
+	    args_for_catchpoint_enable args;  
+	    args.kind = b->type == bp_catch_catch ? EX_EVENT_CATCH : EX_EVENT_THROW;
+	    args.enable = 1;
+	    val = catch_errors (cover_target_enable_exception_callback,
+				&args,
+				message, RETURN_MASK_ALL);
+	    if (val != 0 && val != -1)
+	      {
+		b->inserted = 1;
+	      }
+	    /* Check if something went wrong; val == 0 can be ignored */ 
+	    if (val == -1)
+	      {
+		/* something went wrong */ 
+		target_terminal_ours_for_output ();
+		fprintf_unfiltered (gdb_stderr, "Cannot insert catchpoint %d; disabling it\n", b->number);
+		b->enable = disabled;
+	      }
+          }
+      }
+
+      else if ((b->type == bp_hardware_watchpoint ||
+		b->type == bp_read_watchpoint ||
+		b->type == bp_access_watchpoint)
+	       && b->enable == enabled
+	       && ! b->inserted
+	       && ! b->duplicate)
+	{
+	  struct frame_info *saved_frame;
+	  int saved_level, within_current_scope;
+	  value_ptr mark = value_mark ();
+	  value_ptr v;
+
+	  /* Save the current frame and level so we can restore it after
+	     evaluating the watchpoint expression on its own frame.  */
+	  saved_frame = selected_frame;
+	  saved_level = selected_frame_level;
+
+	  /* Determine if the watchpoint is within scope.  */
+	  if (b->exp_valid_block == NULL)
+	    within_current_scope = 1;
+	  else
+	    {
+	      struct frame_info *fi;
+
+	      /* There might be no current frame at this moment if we are
+		 resuming from a step over a breakpoint.
+		 Set up current frame before trying to find the watchpoint
+		 frame.  */
+	      get_current_frame ();
+	      fi = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+	      within_current_scope = (fi != NULL);
+	      if (within_current_scope)
+		select_frame (fi, -1);
+	    }
+	
+	  if (within_current_scope)
+	    {
+	      /* Evaluate the expression and cut the chain of values
+		 produced off from the value chain.  */
+	      v = evaluate_expression (b->exp);
+	      value_release_to_mark (mark);
+	    
+	      b->val_chain = v;
+	      b->inserted = 1;
+
+	      /* Look at each value on the value chain.  */
+	      for ( ; v; v=v->next)
+		{
+		  /* If it's a memory location, then we must watch it.  */
+		  if (v->lval == lval_memory)
+		    {
+		      int addr, len, type;
+		    
+		      addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+		      len = TYPE_LENGTH (VALUE_TYPE (v));
+		      type = 0;
+		      if (b->type == bp_read_watchpoint)
+			type = 1;
+		      else if (b->type == bp_access_watchpoint)
+			type = 2;
+
+		      val = target_insert_watchpoint (addr, len, type);
+		      if (val == -1)
+			{
+			  b->inserted = 0;
+			  break;
+			}
+		      val = 0;
+		    }
+		}
+	      /* Failure to insert a watchpoint on any memory value in the
+		 value chain brings us here.  */
+	      if (!b->inserted)
+		warning ("Hardware watchpoint %d: Could not insert watchpoint\n",
+			 b->number);
+	    }
+	  else
+	    {
+	      printf_filtered ("\
+Hardware watchpoint %d deleted because the program has left the block in\n\
+which its expression is valid.\n", b->number);
+	      if (b->related_breakpoint)
+		b->related_breakpoint->disposition = del_at_next_stop;
+	      b->disposition = del_at_next_stop;
+	    }
+
+	  /* Restore the frame and level.  */
+	  if ((saved_frame != selected_frame) ||
+	      (saved_level != selected_frame_level))
+	    select_and_print_frame (saved_frame, saved_level);
+	} 
+      else if ((b->type == bp_catch_fork
+                || b->type == bp_catch_vfork
+                || b->type == bp_catch_exec)
+               && b->enable == enabled
+               && ! b->inserted
+               && ! b->duplicate)
+	{
+	  val = -1;
+          switch (b->type)
+            {
+	    case bp_catch_fork :
+	      val = target_insert_fork_catchpoint (inferior_pid);
+	      break;
+	    case bp_catch_vfork :
+	      val = target_insert_vfork_catchpoint (inferior_pid);
+	      break;
+	    case bp_catch_exec :
+	      val = target_insert_exec_catchpoint (inferior_pid);
+	      break;
+            }
+          if (val < 0)
+            {
+              target_terminal_ours_for_output ();
+              fprintf_unfiltered (gdb_stderr, "Cannot insert catchpoint %d:\n", b->number);
+            }
+          else
+            b->inserted = 1;
+        }
+    }
+  if (disabled_breaks)
+    printf_filtered ("\n");
+
+  return val;
+}
+
+
+int
+remove_breakpoints ()
+{
+  register struct breakpoint *b;
+  int val;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->inserted)
+	{
+	  val = remove_breakpoint (b, mark_uninserted);
+	  if (val != 0)
+	    return val;
+	}
+    }
+  return 0;
+}
+
+int
+reattach_breakpoints (pid)
+  int  pid;
+{
+  register struct breakpoint *b;
+  int val;
+  int  saved_inferior_pid = inferior_pid;
+
+  inferior_pid = pid;  /* Because remove_breakpoint will use this global. */
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->inserted)
+	{
+          remove_breakpoint (b, mark_inserted);
+          if (b->type == bp_hardware_breakpoint)
+            val = target_insert_hw_breakpoint(b->address, b->shadow_contents);
+          else
+            val = target_insert_breakpoint(b->address, b->shadow_contents);
+	  if (val != 0)
+            {
+              inferior_pid = saved_inferior_pid;
+              return val;
+            }
+        }
+    }
+  inferior_pid = saved_inferior_pid;
+  return 0;
+}
+
+void
+update_breakpoints_after_exec ()
+{
+  struct breakpoint *  b;
+  struct breakpoint *  temp;
+
+  /* Doing this first prevents the badness of having delete_breakpoint()
+     write a breakpoint's current "shadow contents" to lift the bp.  That
+     shadow is NOT valid after an exec()! */
+  mark_breakpoints_out ();
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      /* Solib breakpoints must be explicitly reset after an exec(). */
+      if (b->type == bp_shlib_event)
+        {
+          delete_breakpoint (b);
+          continue;
+        }
+
+      /* Step-resume breakpoints are meaningless after an exec(). */
+      if (b->type == bp_step_resume)
+        {
+          delete_breakpoint (b);
+          continue;
+        }
+
+      /* Ditto the sigtramp handler breakpoints. */
+      if (b->type == bp_through_sigtramp)
+        {
+          delete_breakpoint (b);
+          continue;
+        }
+
+      /* Ditto the exception-handling catchpoints. */
+      if ((b->type == bp_catch_catch) || (b->type == bp_catch_throw))
+        {
+          delete_breakpoint (b);
+          continue;
+        }
+
+      /* Don't delete an exec catchpoint, because else the inferior
+         won't stop when it ought!
+
+         Similarly, we probably ought to keep vfork catchpoints, 'cause
+         on this target, we may not be able to stop when the vfork is seen,
+         but only when the subsequent exec is seen.  (And because deleting
+         fork catchpoints here but not vfork catchpoints will seem mysterious
+         to users, keep those too.)
+
+         ??rehrauer: Let's hope that merely clearing out this catchpoint's
+         target address field, if any, is sufficient to have it be reset
+         automagically.  Certainly on HP-UX that's true. */
+      if ((b->type == bp_catch_exec) ||
+          (b->type == bp_catch_vfork) ||
+          (b->type == bp_catch_fork))
+        {
+          b->address = (CORE_ADDR) NULL;
+          continue;
+        }
+
+      /* bp_finish is a special case.  The only way we ought to be able
+         to see one of these when an exec() has happened, is if the user
+         caught a vfork, and then said "finish".  Ordinarily a finish just
+         carries them to the call-site of the current callee, by setting
+         a temporary bp there and resuming.  But in this case, the finish
+         will carry them entirely through the vfork & exec.
+
+         We don't want to allow a bp_finish to remain inserted now.  But
+         we can't safely delete it, 'cause finish_command has a handle to
+         the bp on a bpstat, and will later want to delete it.  There's a
+         chance (and I've seen it happen) that if we delete the bp_finish
+         here, that its storage will get reused by the time finish_command
+         gets 'round to deleting the "use to be a bp_finish" breakpoint.
+         We really must allow finish_command to delete a bp_finish.
+
+         In the absense of a general solution for the "how do we know it's
+         safe to delete something others may have handles to?" problem, what
+         we'll do here is just uninsert the bp_finish, and let finish_command
+         delete it.
+
+         (We know the bp_finish is "doomed" in the sense that it's momentary,
+         and will be deleted as soon as finish_command sees the inferior stopped.
+         So it doesn't matter that the bp's address is probably bogus in the
+         new a.out, unlike e.g., the solib breakpoints.)  */
+      if (b->type == bp_finish)
+        {
+          continue;
+        }
+
+      /* Without a symbolic address, we have little hope of the
+         pre-exec() address meaning the same thing in the post-exec()
+         a.out. */
+      if (b->addr_string == NULL)
+        {
+          delete_breakpoint (b);
+          continue;
+        }
+
+      /* If this breakpoint has survived the above battery of checks, then
+         it must have a symbolic address.  Be sure that it gets reevaluated
+         to a target address, rather than reusing the old evaluation.  */
+      b->address = (CORE_ADDR) NULL;
+    }
+}
+
+int
+detach_breakpoints (pid)
+  int  pid;
+{
+  register struct breakpoint *b;
+  int val;
+  int  saved_inferior_pid = inferior_pid;
+ 
+  if (pid == inferior_pid)
+    error ("Cannot detach breakpoints of inferior_pid");
+ 
+  inferior_pid = pid;  /* Because remove_breakpoint will use this global. */
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->inserted)
+        {
+          val = remove_breakpoint (b, mark_inserted);
+          if (val != 0)
+            {
+              inferior_pid = saved_inferior_pid;
+              return val;
+            }
+        }
+    }
+  inferior_pid = saved_inferior_pid;
+  return 0;
+}
+
+static int
+remove_breakpoint (b, is)
+     struct breakpoint *b;
+     insertion_state_t  is;
+{
+  int val;
+  
+  if (b->type == bp_none)
+    warning ("attempted to remove apparently deleted breakpoint #%d?\n", b->number);
+
+  if (b->type != bp_watchpoint
+      && b->type != bp_hardware_watchpoint
+      && b->type != bp_read_watchpoint
+      && b->type != bp_access_watchpoint
+      && b->type != bp_catch_fork
+      && b->type != bp_catch_vfork
+      && b->type != bp_catch_exec
+      && b->type != bp_catch_catch
+      && b->type != bp_catch_throw)
+      
+    {
+      if (b->type == bp_hardware_breakpoint)
+        val = target_remove_hw_breakpoint(b->address, b->shadow_contents);
+      else
+	{
+	  /* Check to see if breakpoint is in an overlay section;
+	     if so, we should remove the breakpoint at the LMA address.
+	     If that is not equal to the raw address, then we should 
+	     presumable remove the breakpoint there as well.  */
+	  if (overlay_debugging && b->section && 
+	      section_is_overlay (b->section))
+	    {
+	      CORE_ADDR addr;
+
+	      addr = overlay_unmapped_address (b->address, b->section);
+	      val = target_remove_breakpoint (addr, b->shadow_contents);
+	      /* This would be the time to check val, to see if the
+		 shadow breakpoint write to the load address succeeded.  
+		 However, this might be an ordinary occurrance, eg. if 
+		 the unmapped overlay is in ROM.  */
+	      val = 0;	/* in case unmapped address failed */
+	      if (section_is_mapped (b->section))
+		val = target_remove_breakpoint (b->address, 
+						b->shadow_contents);
+	    }
+	  else /* ordinary (non-overlay) address */
+	    val = target_remove_breakpoint(b->address, b->shadow_contents);
+	}
+      if (val)
+	return val;
+      b->inserted = (is == mark_inserted);
+    }
+  else if ((b->type == bp_hardware_watchpoint ||
+            b->type == bp_read_watchpoint ||
+  	    b->type == bp_access_watchpoint)
+	   && b->enable == enabled
+	   && ! b->duplicate)
+    {
+      value_ptr v, n;
+      
+      b->inserted = (is == mark_inserted);
+      /* Walk down the saved value chain.  */
+      for (v = b->val_chain; v; v = v->next)
+	{
+	  /* For each memory reference remove the watchpoint
+	     at that address.  */
+	  if (v->lval == lval_memory)
+	    {
+	      int addr, len, type;
+	      
+	      addr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+	      len = TYPE_LENGTH (VALUE_TYPE (v));
+	      type = 0;
+	      if (b->type == bp_read_watchpoint)
+		type = 1;
+	      else if (b->type == bp_access_watchpoint)
+		type = 2;
+
+	      val = target_remove_watchpoint (addr, len, type);
+	      if (val == -1)
+		b->inserted = 1;
+	      val = 0;
+	    }
+	}
+      /* Failure to remove any of the hardware watchpoints comes here.  */
+      if ((is == mark_uninserted) && (b->inserted))
+	warning ("Hardware watchpoint %d: Could not remove watchpoint\n",
+		 b->number);
+      
+      /* Free the saved value chain.  We will construct a new one
+	 the next time the watchpoint is inserted.  */
+      for (v = b->val_chain; v; v = n)
+	{
+	  n = v->next;
+	  value_free (v);
+	}
+      b->val_chain = NULL;
+    }
+  else if ((b->type == bp_catch_fork ||
+            b->type == bp_catch_vfork ||
+  	    b->type == bp_catch_exec)
+	   && b->enable == enabled
+	   && ! b->duplicate)
+    {
+      val = -1;
+      switch (b->type)
+        {
+          case bp_catch_fork:
+            val = target_remove_fork_catchpoint (inferior_pid);
+            break;
+          case bp_catch_vfork :
+            val = target_remove_vfork_catchpoint (inferior_pid);
+            break;
+          case bp_catch_exec :
+            val = target_remove_exec_catchpoint (inferior_pid);
+            break;
+        }
+      if (val)
+	return val;
+      b->inserted = (is == mark_inserted);
+    }
+  else if ((b->type == bp_catch_catch ||
+            b->type == bp_catch_throw)
+           && b->enable == enabled
+           && ! b->duplicate)
+    {
+
+      val = target_remove_breakpoint(b->address, b->shadow_contents);
+      if (val)
+        return val;
+      b->inserted = (is == mark_inserted);
+    }
+  else if (ep_is_exception_catchpoint (b)
+           && b->inserted /* sometimes previous insert doesn't happen */ 
+           && b->enable == enabled
+           && ! b->duplicate)
+    {
+
+      val = target_remove_breakpoint(b->address, b->shadow_contents);
+      if (val)
+          return val;
+      
+      b->inserted = (is == mark_inserted);
+    }
+
+  return 0;
+}
+
+/* Clear the "inserted" flag in all breakpoints.  */
+
+void
+mark_breakpoints_out ()
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    b->inserted = 0;
+}
+
+/* Clear the "inserted" flag in all breakpoints and delete any breakpoints
+   which should go away between runs of the program.
+
+   Plus other such housekeeping that has to be done for breakpoints
+   between runs.
+
+   Note: this function gets called at the end of a run (by generic_mourn_inferior)
+   and when a run begins (by init_wait_for_inferior). */ 
+
+
+
+void
+breakpoint_init_inferior (context)
+  enum inf_context context;
+{
+  register struct breakpoint *b, *temp;
+  static int warning_needed = 0;
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      b->inserted = 0;
+
+      switch (b->type)
+	{
+	case bp_call_dummy:
+	case bp_watchpoint_scope:
+
+	  /* If the call dummy breakpoint is at the entry point it will
+	     cause problems when the inferior is rerun, so we better
+	     get rid of it. 
+
+	     Also get rid of scope breakpoints.  */
+	  delete_breakpoint (b);
+	  break;
+
+	case bp_watchpoint:
+	case bp_hardware_watchpoint:
+	case bp_read_watchpoint:
+	case bp_access_watchpoint:
+
+	  /* Likewise for watchpoints on local expressions.  */
+	  if (b->exp_valid_block != NULL)
+	    delete_breakpoint (b);
+	  break;
+	default:
+         /* Likewise for exception catchpoints in dynamic-linked
+         executables where required */
+         if (ep_is_exception_catchpoint (b) &&
+            exception_catchpoints_are_fragile)
+          {
+            warning_needed = 1;
+            delete_breakpoint (b);
+          }
+          break;
+	}
+    }
+
+  if (exception_catchpoints_are_fragile)
+    exception_support_initialized = 0;
+
+  /* Don't issue the warning unless it's really needed... */ 
+  if (warning_needed && (context != inf_exited))
+    {
+      warning ("Exception catchpoints from last run were deleted, you must reinsert them explicitly");
+      warning_needed = 0;
+    }  
+}
+
+/* breakpoint_here_p (PC) returns 1 if an enabled breakpoint exists at PC.
+   When continuing from a location with a breakpoint,
+   we actually single step once before calling insert_breakpoints.  */
+
+int
+breakpoint_here_p (pc)
+     CORE_ADDR pc;
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->enable == enabled
+	&& b->enable != shlib_disabled
+	&& b->enable != call_disabled
+	&& b->address == pc)	/* bp is enabled and matches pc */
+      {
+        if (overlay_debugging &&
+	    section_is_overlay (b->section) &&
+	    !section_is_mapped (b->section))
+	  continue;		/* unmapped overlay -- can't be a match */
+        else
+	  return 1;
+      }
+
+  return 0;
+}
+
+/* breakpoint_inserted_here_p (PC) is just like breakpoint_here_p(), but it
+   only returns true if there is actually a breakpoint inserted at PC.  */
+
+int
+breakpoint_inserted_here_p (pc)
+     CORE_ADDR pc;
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->inserted
+	&& b->address == pc)	/* bp is inserted and matches pc */
+      {
+        if (overlay_debugging &&
+	    section_is_overlay (b->section) &&
+	    !section_is_mapped (b->section))
+	  continue;		/* unmapped overlay -- can't be a match */
+        else
+	  return 1;
+      }
+
+  return 0;
+}
+
+/* Return nonzero if FRAME is a dummy frame.  We can't use PC_IN_CALL_DUMMY
+   because figuring out the saved SP would take too much time, at least using
+   get_saved_register on the 68k.  This means that for this function to
+   work right a port must use the bp_call_dummy breakpoint.  */
+
+int
+frame_in_dummy (frame)
+     struct frame_info *frame;
+{
+#ifdef CALL_DUMMY
+#ifdef USE_GENERIC_DUMMY_FRAMES 
+  return generic_pc_in_call_dummy (frame->pc, frame->frame);
+#else
+  struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    {
+      static ULONGEST dummy[] = CALL_DUMMY;
+
+      if (b->type == bp_call_dummy
+	  && b->frame == frame->frame
+
+	  /* We need to check the PC as well as the frame on the sparc,
+	     for signals.exp in the testsuite.  */
+	  && (frame->pc
+	      >= (b->address
+		  - sizeof (dummy) / sizeof (LONGEST) * REGISTER_SIZE))
+	  && frame->pc <= b->address)
+	return 1;
+    }
+#endif	/* GENERIC_DUMMY_FRAMES */
+#endif /* CALL_DUMMY */
+  return 0;
+}
+
+/* breakpoint_match_thread (PC, PID) returns true if the breakpoint at PC
+   is valid for process/thread PID.  */
+
+int
+breakpoint_thread_match (pc, pid)
+     CORE_ADDR pc;
+     int pid;
+{
+  struct breakpoint *b;
+  int thread;
+
+  thread = pid_to_thread_id (pid);
+
+  ALL_BREAKPOINTS (b)
+    if (b->enable != disabled
+	&& b->enable != shlib_disabled
+	&& b->enable != call_disabled
+	&& b->address == pc
+	&& (b->thread == -1 || b->thread == thread))
+      {
+        if (overlay_debugging &&
+	    section_is_overlay (b->section) &&
+	    !section_is_mapped (b->section))
+	  continue;		/* unmapped overlay -- can't be a match */
+        else
+	  return 1;
+      }
+
+  return 0;
+}
+
+
+/* bpstat stuff.  External routines' interfaces are documented
+   in breakpoint.h.  */
+
+int
+ep_is_catchpoint (ep)
+  struct breakpoint *  ep;
+{
+  return
+    (ep->type == bp_catch_load)
+    || (ep->type == bp_catch_unload)
+    || (ep->type == bp_catch_fork)
+    || (ep->type == bp_catch_vfork)
+    || (ep->type == bp_catch_exec)
+    || (ep->type == bp_catch_catch)
+    || (ep->type == bp_catch_throw)
+
+
+    /* ??rehrauer: Add more kinds here, as are implemented... */
+    ;
+}
+ 
+int
+ep_is_shlib_catchpoint (ep)
+  struct breakpoint *  ep;
+{
+  return
+    (ep->type == bp_catch_load)
+    || (ep->type == bp_catch_unload)
+    ;
+}
+
+int
+ep_is_exception_catchpoint (ep)
+  struct breakpoint *  ep;
+{
+  return
+    (ep->type == bp_catch_catch)
+    || (ep->type == bp_catch_throw)
+    ;
+}
+
+/* Clear a bpstat so that it says we are not at any breakpoint.
+   Also free any storage that is part of a bpstat.  */
+
+void
+bpstat_clear (bsp)
+     bpstat *bsp;
+{
+  bpstat p;
+  bpstat q;
+
+  if (bsp == 0)
+    return;
+  p = *bsp;
+  while (p != NULL)
+    {
+      q = p->next;
+      if (p->old_val != NULL)
+	value_free (p->old_val);
+      free ((PTR)p);
+      p = q;
+    }
+  *bsp = NULL;
+}
+
+/* Return a copy of a bpstat.  Like "bs1 = bs2" but all storage that
+   is part of the bpstat is copied as well.  */
+
+bpstat
+bpstat_copy (bs)
+     bpstat bs;
+{
+  bpstat p = NULL;
+  bpstat tmp;
+  bpstat retval = NULL;
+
+  if (bs == NULL)
+    return bs;
+
+  for (; bs != NULL; bs = bs->next)
+    {
+      tmp = (bpstat) xmalloc (sizeof (*tmp));
+      memcpy (tmp, bs, sizeof (*tmp));
+      if (p == NULL)
+	/* This is the first thing in the chain.  */
+	retval = tmp;
+      else
+	p->next = tmp;
+      p = tmp;
+    }
+  p->next = NULL;
+  return retval;
+}
+
+/* Find the bpstat associated with this breakpoint */
+
+bpstat
+bpstat_find_breakpoint(bsp, breakpoint)
+     bpstat bsp;
+     struct breakpoint *breakpoint;
+{
+  if (bsp == NULL) return NULL;
+
+  for (;bsp != NULL; bsp = bsp->next) {
+    if (bsp->breakpoint_at == breakpoint) return bsp;
+  }
+  return NULL;
+}
+
+/* Find a step_resume breakpoint associated with this bpstat.
+   (If there are multiple step_resume bp's on the list, this function
+   will arbitrarily pick one.)
+
+   It is an error to use this function if BPSTAT doesn't contain a
+   step_resume breakpoint.
+
+   See wait_for_inferior's use of this function.  */
+struct breakpoint *
+bpstat_find_step_resume_breakpoint (bsp)
+  bpstat  bsp;
+{
+  if (bsp == NULL)
+    error ("Internal error (bpstat_find_step_resume_breakpoint)");
+
+  for (; bsp != NULL; bsp = bsp->next)
+    {
+      if ((bsp->breakpoint_at != NULL) &&
+          (bsp->breakpoint_at->type == bp_step_resume))
+        return bsp->breakpoint_at;
+    }
+
+  error ("Internal error (no step_resume breakpoint found)");
+}
+
+
+/* Return the breakpoint number of the first breakpoint we are stopped
+   at.  *BSP upon return is a bpstat which points to the remaining
+   breakpoints stopped at (but which is not guaranteed to be good for
+   anything but further calls to bpstat_num).
+   Return 0 if passed a bpstat which does not indicate any breakpoints.  */
+
+int
+bpstat_num (bsp)
+     bpstat *bsp;
+{
+  struct breakpoint *b;
+
+  if ((*bsp) == NULL)
+    return 0;			/* No more breakpoint values */
+  else
+    {
+      b = (*bsp)->breakpoint_at;
+      *bsp = (*bsp)->next;
+      if (b == NULL)
+	return -1;		/* breakpoint that's been deleted since */
+      else
+        return b->number;	/* We have its number */
+    }
+}
+
+/* Modify BS so that the actions will not be performed.  */
+
+void
+bpstat_clear_actions (bs)
+     bpstat bs;
+{
+  for (; bs != NULL; bs = bs->next)
+    {
+      bs->commands = NULL;
+      if (bs->old_val != NULL)
+	{
+	  value_free (bs->old_val);
+	  bs->old_val = NULL;
+	}
+    }
+}
+
+/* Stub for cleaning up our state if we error-out of a breakpoint command */
+/* ARGSUSED */
+static void
+cleanup_executing_breakpoints (ignore)
+     PTR ignore;
+{
+  executing_breakpoint_commands = 0;
+}
+
+/* Execute all the commands associated with all the breakpoints at this
+   location.  Any of these commands could cause the process to proceed
+   beyond this point, etc.  We look out for such changes by checking
+   the global "breakpoint_proceeded" after each command.  */
+
+void
+bpstat_do_actions (bsp)
+     bpstat *bsp;
+{
+  bpstat bs;
+  struct cleanup *old_chain;
+  struct command_line *cmd;
+
+  /* Avoid endless recursion if a `source' command is contained
+     in bs->commands.  */
+  if (executing_breakpoint_commands)
+    return;
+
+  executing_breakpoint_commands = 1;
+  old_chain = make_cleanup (cleanup_executing_breakpoints, 0);
+
+top:
+  /* Note that (as of this writing), our callers all appear to
+     be passing us the address of global stop_bpstat.  And, if
+     our calls to execute_control_command cause the inferior to
+     proceed, that global (and hence, *bsp) will change.
+
+     We must be careful to not touch *bsp unless the inferior
+     has not proceeded. */
+
+  /* This pointer will iterate over the list of bpstat's. */
+  bs = *bsp;
+
+  breakpoint_proceeded = 0;
+  for (; bs != NULL; bs = bs->next)
+    {
+      cmd = bs->commands;
+      while (cmd != NULL)
+	{
+	  execute_control_command (cmd);
+
+	  if (breakpoint_proceeded)
+	    break;
+	  else
+	    cmd = cmd->next;
+	}
+      if (breakpoint_proceeded)
+	/* The inferior is proceeded by the command; bomb out now.
+	   The bpstat chain has been blown away by wait_for_inferior.
+	   But since execution has stopped again, there is a new bpstat
+	   to look at, so start over.  */
+	goto top;
+      else
+	bs->commands = NULL;
+    }
+
+  executing_breakpoint_commands = 0;
+  discard_cleanups (old_chain);
+}
+
+/* This is the normal print_it function for a bpstat.  In the future,
+   much of this logic could (should?) be moved to bpstat_stop_status,
+   by having it set different print_it functions.
+
+   Current scheme: When we stop, bpstat_print() is called.
+   It loops through the bpstat list of things causing this stop,
+   calling the print_it function for each one. The default
+   print_it function, used for breakpoints, is print_it_normal().
+   (Also see print_it_noop() and print_it_done()).
+   
+   Return values from this routine (used by bpstat_print() to
+   decide what to do):
+   1: Means we printed something, and we do *not* desire that
+      something to be followed by a location.
+   0: Means we printed something, and we *do*  desire that
+      something to be followed by a location.
+   -1: Means we printed nothing.  */
+
+static int
+print_it_normal (bs)
+     bpstat bs;
+{
+  /* bs->breakpoint_at can be NULL if it was a momentary breakpoint
+     which has since been deleted.  */
+  if (bs->breakpoint_at == NULL
+      || (bs->breakpoint_at->type != bp_breakpoint
+          && bs->breakpoint_at->type != bp_catch_load
+          && bs->breakpoint_at->type != bp_catch_unload
+          && bs->breakpoint_at->type != bp_catch_fork
+          && bs->breakpoint_at->type != bp_catch_vfork
+          && bs->breakpoint_at->type != bp_catch_exec
+          && bs->breakpoint_at->type != bp_catch_catch
+          && bs->breakpoint_at->type != bp_catch_throw
+	  && bs->breakpoint_at->type != bp_hardware_breakpoint
+	  && bs->breakpoint_at->type != bp_watchpoint
+	  && bs->breakpoint_at->type != bp_read_watchpoint
+	  && bs->breakpoint_at->type != bp_access_watchpoint
+	  && bs->breakpoint_at->type != bp_hardware_watchpoint))
+    return -1;
+
+  if (ep_is_shlib_catchpoint (bs->breakpoint_at))
+    {
+      annotate_catchpoint (bs->breakpoint_at->number);
+      printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
+      if (bs->breakpoint_at->type == bp_catch_load)
+        printf_filtered ("loaded");
+      else if (bs->breakpoint_at->type == bp_catch_unload)
+        printf_filtered ("unloaded");
+      printf_filtered (" %s), ", bs->breakpoint_at->triggered_dll_pathname);
+      return 0;
+    }
+  else if (bs->breakpoint_at->type == bp_catch_fork ||
+      bs->breakpoint_at->type == bp_catch_vfork)
+    {
+      annotate_catchpoint (bs->breakpoint_at->number);
+      printf_filtered ("\nCatchpoint %d (", bs->breakpoint_at->number);
+      if (bs->breakpoint_at->type == bp_catch_fork)
+        printf_filtered ("forked");
+      else if (bs->breakpoint_at->type == bp_catch_vfork)
+        printf_filtered ("vforked");
+      printf_filtered (" process %d), ", bs->breakpoint_at->forked_inferior_pid);
+      return 0;
+    }
+  else if (bs->breakpoint_at->type == bp_catch_exec)
+    {
+      annotate_catchpoint (bs->breakpoint_at->number);
+      printf_filtered ("\nCatchpoint %d (exec'd %s), ",
+                       bs->breakpoint_at->number,
+                       bs->breakpoint_at->exec_pathname);
+      return 0;
+    }
+ else if (bs->breakpoint_at->type == bp_catch_catch)
+    {
+      if (current_exception_event && (CURRENT_EXCEPTION_KIND == EX_EVENT_CATCH))
+        {
+          annotate_catchpoint (bs->breakpoint_at->number);
+          printf_filtered ("\nCatchpoint %d (exception caught), ", bs->breakpoint_at->number);
+          printf_filtered ("throw location ");
+          if (CURRENT_EXCEPTION_THROW_PC && CURRENT_EXCEPTION_THROW_LINE)
+                printf_filtered ("%s:%d",
+                                 CURRENT_EXCEPTION_THROW_FILE,
+                                 CURRENT_EXCEPTION_THROW_LINE);
+          else
+            printf_filtered ("unknown");
+          
+          printf_filtered (", catch location ");
+          if (CURRENT_EXCEPTION_CATCH_PC  && CURRENT_EXCEPTION_CATCH_LINE)
+            printf_filtered ("%s:%d",
+                             CURRENT_EXCEPTION_CATCH_FILE,
+                             CURRENT_EXCEPTION_CATCH_LINE);
+          else
+            printf_filtered ("unknown");
+          
+          printf_filtered ("\n");
+          return 1;   /* don't bother to print location frame info */ 
+        }
+      else
+        {
+          return -1;  /* really throw, some other bpstat will handle it */
+        }
+    }
+  else if (bs->breakpoint_at->type == bp_catch_throw)
+    {
+      if (current_exception_event && (CURRENT_EXCEPTION_KIND == EX_EVENT_THROW))
+        {
+          annotate_catchpoint (bs->breakpoint_at->number);
+          printf_filtered ("\nCatchpoint %d (exception thrown), ", bs->breakpoint_at->number);
+          printf_filtered ("throw location ");
+          if (CURRENT_EXCEPTION_THROW_PC && CURRENT_EXCEPTION_THROW_LINE)
+                printf_filtered ("%s:%d",
+                                 CURRENT_EXCEPTION_THROW_FILE,
+                                 CURRENT_EXCEPTION_THROW_LINE);
+          else
+            printf_filtered ("unknown");
+          
+          printf_filtered (", catch location ");
+          if (CURRENT_EXCEPTION_CATCH_PC  && CURRENT_EXCEPTION_CATCH_LINE)
+            printf_filtered ("%s:%d",
+                             CURRENT_EXCEPTION_CATCH_FILE,
+                             CURRENT_EXCEPTION_CATCH_LINE);
+          else
+            printf_filtered ("unknown");
+          
+          printf_filtered ("\n");
+          return 1;   /* don't bother to print location frame info */ 
+        }
+      else
+        {
+          return -1;  /* really catch, some other bpstat willhandle it */
+        }
+    }
+
+  else if (bs->breakpoint_at->type == bp_breakpoint ||
+      bs->breakpoint_at->type == bp_hardware_breakpoint)
+    {
+      /* I think the user probably only wants to see one breakpoint
+	 number, not all of them.  */
+      annotate_breakpoint (bs->breakpoint_at->number);
+      printf_filtered ("\nBreakpoint %d, ", bs->breakpoint_at->number);
+      return 0;
+    }
+  else if ((bs->old_val != NULL) &&
+	(bs->breakpoint_at->type == bp_watchpoint ||
+	 bs->breakpoint_at->type == bp_access_watchpoint ||
+	 bs->breakpoint_at->type == bp_hardware_watchpoint))
+    {
+      annotate_watchpoint (bs->breakpoint_at->number);
+      mention (bs->breakpoint_at);
+      printf_filtered ("\nOld value = ");
+      value_print (bs->old_val, gdb_stdout, 0, Val_pretty_default);
+      printf_filtered ("\nNew value = ");
+      value_print (bs->breakpoint_at->val, gdb_stdout, 0,
+		   Val_pretty_default);
+      printf_filtered ("\n");
+      value_free (bs->old_val);
+      bs->old_val = NULL;
+      /* More than one watchpoint may have been triggered.  */
+      return -1;
+    }
+  else if (bs->breakpoint_at->type == bp_access_watchpoint ||
+	   bs->breakpoint_at->type == bp_read_watchpoint)
+    {
+      mention (bs->breakpoint_at);
+      printf_filtered ("\nValue = ");
+      value_print (bs->breakpoint_at->val, gdb_stdout, 0,
+                   Val_pretty_default);
+      printf_filtered ("\n");
+      return -1;
+    }
+  /* We can't deal with it.  Maybe another member of the bpstat chain can.  */
+  return -1;
+}
+
+/* Print a message indicating what happened.
+   This is called from normal_stop().
+   The input to this routine is the head of the bpstat list - a list
+   of the eventpoints that caused this stop.
+   This routine calls the "print_it" routine(s) associated
+   with these eventpoints. This will print (for example)
+   the "Breakpoint n," part of the output.
+   The return value of this routine is one of:
+
+   -1: Means we printed nothing
+   0: Means we printed something, and expect subsequent
+      code to print the location. An example is 
+      "Breakpoint 1, " which should be followed by
+      the location.
+   1 : Means we printed something, but there is no need
+       to also print the location part of the message.
+       An example is the catch/throw messages, which
+       don't require a location appended to the end.  */ 
+
+int
+bpstat_print (bs)
+     bpstat bs;
+{
+  int val;
+  
+  if (bs == NULL)
+    return -1;
+
+  val = (*bs->print_it) (bs);
+  if (val >= 0)
+    return val;
+  
+  /* Maybe another breakpoint in the chain caused us to stop.
+     (Currently all watchpoints go on the bpstat whether hit or
+     not.  That probably could (should) be changed, provided care is taken
+     with respect to bpstat_explains_signal).  */
+  if (bs->next)
+    return bpstat_print (bs->next);
+
+  /* We reached the end of the chain without printing anything.  */
+  return -1;
+}
+
+/* Evaluate the expression EXP and return 1 if value is zero.
+   This is used inside a catch_errors to evaluate the breakpoint condition. 
+   The argument is a "struct expression *" that has been cast to char * to 
+   make it pass through catch_errors.  */
+
+static int
+breakpoint_cond_eval (exp)
+     PTR exp;
+{
+  value_ptr mark = value_mark ();
+  int i = !value_true (evaluate_expression ((struct expression *)exp));
+  value_free_to_mark (mark);
+  return i;
+}
+
+/* Allocate a new bpstat and chain it to the current one.  */
+
+static bpstat
+bpstat_alloc (b, cbs)
+     register struct breakpoint *b;
+     bpstat cbs;			/* Current "bs" value */
+{
+  bpstat bs;
+
+  bs = (bpstat) xmalloc (sizeof (*bs));
+  cbs->next = bs;
+  bs->breakpoint_at = b;
+  /* If the condition is false, etc., don't do the commands.  */
+  bs->commands = NULL;
+  bs->old_val = NULL;
+  bs->print_it = print_it_normal;
+  return bs;
+}
+
+/* Possible return values for watchpoint_check (this can't be an enum
+   because of check_errors).  */
+/* The watchpoint has been deleted.  */
+#define WP_DELETED 1
+/* The value has changed.  */
+#define WP_VALUE_CHANGED 2
+/* The value has not changed.  */
+#define WP_VALUE_NOT_CHANGED 3
+
+#define BP_TEMPFLAG 1
+#define BP_HARDWAREFLAG 2
+
+/* Check watchpoint condition.  */
+
+static int
+watchpoint_check (p)
+     PTR p;
+{
+  bpstat bs = (bpstat) p;
+  struct breakpoint *b;
+  struct frame_info *fr;
+  int within_current_scope;
+
+  b = bs->breakpoint_at;
+
+  if (b->exp_valid_block == NULL)
+    within_current_scope = 1;
+  else
+    {
+      /* There is no current frame at this moment.  If we're going to have
+	 any chance of handling watchpoints on local variables, we'll need
+	 the frame chain (so we can determine if we're in scope).  */
+      reinit_frame_cache();
+      fr = find_frame_addr_in_frame_chain (b->watchpoint_frame);
+      within_current_scope = (fr != NULL);
+      if (within_current_scope)
+	/* If we end up stopping, the current frame will get selected
+	   in normal_stop.  So this call to select_frame won't affect
+	   the user.  */
+	select_frame (fr, -1);
+    }
+      
+  if (within_current_scope)
+    {
+      /* We use value_{,free_to_}mark because it could be a
+         *long* time before we return to the command level and
+	 call free_all_values.  We can't call free_all_values because
+	 we might be in the middle of evaluating a function call.  */
+
+      value_ptr mark = value_mark ();
+      value_ptr new_val = evaluate_expression (bs->breakpoint_at->exp);
+      if (!value_equal (b->val, new_val))
+	{
+	  release_value (new_val);
+	  value_free_to_mark (mark);
+	  bs->old_val = b->val;
+	  b->val = new_val;
+	  /* We will stop here */
+	  return WP_VALUE_CHANGED;
+	}
+      else
+	{
+	  /* Nothing changed, don't do anything.  */
+	  value_free_to_mark (mark);
+	  /* We won't stop here */
+	  return WP_VALUE_NOT_CHANGED;
+	}
+    }
+  else
+    {
+      /* This seems like the only logical thing to do because
+	 if we temporarily ignored the watchpoint, then when
+	 we reenter the block in which it is valid it contains
+	 garbage (in the case of a function, it may have two
+	 garbage values, one before and one after the prologue).
+	 So we can't even detect the first assignment to it and
+	 watch after that (since the garbage may or may not equal
+	 the first value assigned).  */
+      printf_filtered ("\
+Watchpoint %d deleted because the program has left the block in\n\
+which its expression is valid.\n", bs->breakpoint_at->number);
+      if (b->related_breakpoint)
+	b->related_breakpoint->disposition = del_at_next_stop;
+      b->disposition = del_at_next_stop;
+
+      return WP_DELETED;
+    }
+}
+
+/* This is used when everything which needs to be printed has
+   already been printed.  But we still want to print the frame.  */
+
+/* Background: When we stop, bpstat_print() is called.
+   It loops through the bpstat list of things causing this stop,
+   calling the print_it function for each one. The default
+   print_it function, used for breakpoints, is print_it_normal().
+   Also see print_it_noop() and print_it_done() are the other 
+   two possibilities. See comments in bpstat_print() and
+   in header of print_it_normal() for more detail.  */
+
+static int
+print_it_done (bs)
+     bpstat bs;
+{
+  return 0;
+}
+
+/* This is used when nothing should be printed for this bpstat entry.  */
+/* Background: When we stop, bpstat_print() is called.
+   It loops through the bpstat list of things causing this stop,
+   calling the print_it function for each one. The default
+   print_it function, used for breakpoints, is print_it_normal().
+   Also see print_it_noop() and print_it_done() are the other 
+   two possibilities. See comments in bpstat_print() and
+   in header of print_it_normal() for more detail.  */
+
+static int
+print_it_noop (bs)
+     bpstat bs;
+{
+  return -1;
+}
+
+/* Get a bpstat associated with having just stopped at address *PC
+   and frame address CORE_ADDRESS.  Update *PC to point at the
+   breakpoint (if we hit a breakpoint).  NOT_A_BREAKPOINT is nonzero
+   if this is known to not be a real breakpoint (it could still be a
+   watchpoint, though).  */
+
+/* Determine whether we stopped at a breakpoint, etc, or whether we
+   don't understand this stop.  Result is a chain of bpstat's such that:
+
+	if we don't understand the stop, the result is a null pointer.
+
+	if we understand why we stopped, the result is not null.
+
+	Each element of the chain refers to a particular breakpoint or
+	watchpoint at which we have stopped.  (We may have stopped for
+	several reasons concurrently.)
+
+	Each element of the chain has valid next, breakpoint_at,
+	commands, FIXME??? fields.  */
+
+bpstat
+bpstat_stop_status (pc, not_a_breakpoint)
+     CORE_ADDR *pc;
+     int not_a_breakpoint;
+{
+  register struct breakpoint *b, *temp;
+  CORE_ADDR bp_addr;
+  /* True if we've hit a breakpoint (as opposed to a watchpoint).  */
+  int real_breakpoint = 0;
+  /* Root of the chain of bpstat's */
+  struct bpstats root_bs[1];
+  /* Pointer to the last thing in the chain currently.  */
+  bpstat bs = root_bs;
+  static char message1[] =
+            "Error evaluating expression for watchpoint %d\n";
+  char message[sizeof (message1) + 30 /* slop */];
+
+  /* Get the address where the breakpoint would have been.  */
+  bp_addr = *pc - DECR_PC_AFTER_BREAK;
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      if (b->enable == disabled
+	  || b->enable == shlib_disabled
+          || b->enable == call_disabled)
+	continue;
+
+      if (b->type != bp_watchpoint
+	  && b->type != bp_hardware_watchpoint
+          && b->type != bp_read_watchpoint
+          && b->type != bp_access_watchpoint
+	  && b->type != bp_hardware_breakpoint
+          && b->type != bp_catch_fork
+          && b->type != bp_catch_vfork
+          && b->type != bp_catch_exec
+          && b->type != bp_catch_catch
+          && b->type != bp_catch_throw)         /* a non-watchpoint bp */
+	if (b->address != bp_addr ||		/* address doesn't match or */
+	    (overlay_debugging &&		/* overlay doesn't match */
+	     section_is_overlay (b->section) &&
+	     !section_is_mapped (b->section)))
+	  continue;
+
+      if (b->type == bp_hardware_breakpoint
+	  && b->address != (*pc - DECR_PC_AFTER_HW_BREAK))
+	continue;
+
+      if (b->type != bp_watchpoint
+	  && b->type != bp_hardware_watchpoint
+	  && b->type != bp_read_watchpoint
+	  && b->type != bp_access_watchpoint
+	  && not_a_breakpoint)
+	continue;
+
+      /* Is this a catchpoint of a load or unload?  If so, did we
+         get a load or unload of the specified library?  If not,
+         ignore it. */
+      if ((b->type == bp_catch_load)
+#if defined(SOLIB_HAVE_LOAD_EVENT)
+          && (!SOLIB_HAVE_LOAD_EVENT(inferior_pid)
+              || ((b->dll_pathname != NULL)
+                  && (strcmp (b->dll_pathname, SOLIB_LOADED_LIBRARY_PATHNAME(inferior_pid)) != 0)))
+#endif
+		  )
+        continue;
+ 
+      if ((b->type == bp_catch_unload)
+#if defined(SOLIB_HAVE_UNLOAD_EVENT)
+          && (!SOLIB_HAVE_UNLOAD_EVENT(inferior_pid)
+              || ((b->dll_pathname != NULL)
+                  && (strcmp (b->dll_pathname, SOLIB_UNLOADED_LIBRARY_PATHNAME(inferior_pid)) != 0)))
+#endif
+	  )
+        continue;
+ 
+      if ((b->type == bp_catch_fork)
+          && ! target_has_forked (inferior_pid, &b->forked_inferior_pid))
+          continue;
+ 
+      if ((b->type == bp_catch_vfork)
+          && ! target_has_vforked (inferior_pid, &b->forked_inferior_pid))
+          continue;
+ 
+      if ((b->type == bp_catch_exec)
+	  && ! target_has_execd (inferior_pid, &b->exec_pathname))
+	continue;
+
+      if (ep_is_exception_catchpoint (b) &&
+          !(current_exception_event = target_get_current_exception_event ()))
+        continue;
+
+      /* Come here if it's a watchpoint, or if the break address matches */
+
+      bs = bpstat_alloc (b, bs);	/* Alloc a bpstat to explain stop */
+
+      /* Watchpoints may change this, if not found to have triggered. */
+      bs->stop = 1;
+      bs->print = 1;
+
+      sprintf (message, message1, b->number);
+      if (b->type == bp_watchpoint || b->type == bp_hardware_watchpoint)
+	{
+	  switch (catch_errors (watchpoint_check, bs, message, RETURN_MASK_ALL))
+	    {
+	    case WP_DELETED:
+	      /* We've already printed what needs to be printed.  */
+	      bs->print_it = print_it_done;
+	      /* Stop.  */
+	      break;
+	    case WP_VALUE_CHANGED:
+	      /* Stop.  */
+	      ++(b->hit_count);
+	      break;
+	    case WP_VALUE_NOT_CHANGED:
+	      /* Don't stop.  */
+	      bs->print_it = print_it_noop;
+	      bs->stop = 0;
+	      /* Don't consider this a hit.  */
+	      --(b->hit_count);
+	      continue;
+	    default:
+	      /* Can't happen.  */
+	      /* FALLTHROUGH */
+	    case 0:
+	      /* Error from catch_errors.  */
+	      printf_filtered ("Watchpoint %d deleted.\n", b->number);
+	      if (b->related_breakpoint)
+		b->related_breakpoint->disposition = del_at_next_stop;
+	      b->disposition = del_at_next_stop;
+	      /* We've already printed what needs to be printed.  */
+	      bs->print_it = print_it_done;
+
+	      /* Stop.  */
+	      break;
+	    }
+	}
+      else if (b->type == bp_read_watchpoint || b->type == bp_access_watchpoint)
+        {
+	  CORE_ADDR addr;
+	  value_ptr v;
+          int found = 0;
+
+	  addr = target_stopped_data_address();
+	  if (addr == 0) continue;
+          for (v = b->val_chain; v; v = v->next)
+            {
+              if (v->lval == lval_memory)
+                {
+                  CORE_ADDR vaddr;
+
+                  vaddr = VALUE_ADDRESS (v) + VALUE_OFFSET (v);
+	          if (addr == vaddr)
+	            found = 1;
+                }
+            }
+	  if (found) 
+	    switch (catch_errors (watchpoint_check, bs, message, RETURN_MASK_ALL))
+   	      {
+                case WP_DELETED:
+                  /* We've already printed what needs to be printed.  */
+                  bs->print_it = print_it_done;
+                  /* Stop.  */
+                  break;
+                case WP_VALUE_CHANGED:
+                case WP_VALUE_NOT_CHANGED:
+                  /* Stop.  */
+		  ++(b->hit_count);
+                  break;
+                default:
+                  /* Can't happen.  */
+                case 0:
+                  /* Error from catch_errors.  */
+                  printf_filtered ("Watchpoint %d deleted.\n", b->number);
+		  if (b->related_breakpoint)
+		    b->related_breakpoint->disposition = del_at_next_stop;
+		  b->disposition = del_at_next_stop;
+                  /* We've already printed what needs to be printed.  */
+                  bs->print_it = print_it_done;
+                  break;
+	      }
+        }
+      else 
+        {
+          /* By definition, an encountered breakpoint is a triggered
+             breakpoint. */
+          ++(b->hit_count);
+
+	  real_breakpoint = 1;
+        }
+
+      if (b->frame && b->frame != (get_current_frame ())->frame &&
+          (b->type == bp_step_resume && 
+           (INNER_THAN (get_current_frame ()->frame, b->frame))))
+	bs->stop = 0;
+      else
+	{
+	  int value_is_zero = 0;
+
+	  if (b->cond)
+	    {
+	      /* Need to select the frame, with all that implies
+		 so that the conditions will have the right context.  */
+	      select_frame (get_current_frame (), 0);
+	      value_is_zero
+		= catch_errors (breakpoint_cond_eval, (b->cond),
+				"Error in testing breakpoint condition:\n",
+				RETURN_MASK_ALL);
+				/* FIXME-someday, should give breakpoint # */
+	      free_all_values ();
+	    }
+	  if (b->cond && value_is_zero)
+	    {
+	      bs->stop = 0;
+	      /* Don't consider this a hit.  */
+	      --(b->hit_count);
+	    }
+	  else if (b->ignore_count > 0)
+	    {
+	      b->ignore_count--;
+	      bs->stop = 0;
+	    }
+	  else
+	    {
+	      /* We will stop here */
+	      if (b->disposition == disable)
+		b->enable = disabled;
+	      bs->commands = b->commands;
+	      if (b->silent)
+		bs->print = 0;
+	      if (bs->commands &&
+		  (STREQ ("silent", bs->commands->line) ||
+		   (xdb_commands && STREQ ("Q", bs->commands->line))))
+		{
+		  bs->commands = bs->commands->next;
+		  bs->print = 0;
+		}
+	    }
+	}
+      /* Print nothing for this entry if we dont stop or if we dont print.  */
+      if (bs->stop == 0 || bs->print == 0)
+	bs->print_it = print_it_noop;
+    }
+
+  bs->next = NULL;		/* Terminate the chain */
+  bs = root_bs->next;		/* Re-grab the head of the chain */
+
+  if (real_breakpoint && bs)
+    {
+      if (bs->breakpoint_at->type == bp_hardware_breakpoint) 
+	{
+	  if (DECR_PC_AFTER_HW_BREAK != 0) 
+	    {
+	      *pc = *pc - DECR_PC_AFTER_HW_BREAK;
+	      write_pc (*pc);
+	    }
+	}
+      else
+	{
+	  if (DECR_PC_AFTER_BREAK != 0 || must_shift_inst_regs)
+	    {
+	      *pc = bp_addr;
+#if defined (SHIFT_INST_REGS)
+	      SHIFT_INST_REGS();
+#else /* No SHIFT_INST_REGS.  */
+	      write_pc (bp_addr);
+#endif /* No SHIFT_INST_REGS.  */
+	    }
+	}
+    }
+
+  /* The value of a hardware watchpoint hasn't changed, but the
+     intermediate memory locations we are watching may have.  */
+  if (bs && ! bs->stop &&
+      (bs->breakpoint_at->type == bp_hardware_watchpoint ||
+       bs->breakpoint_at->type == bp_read_watchpoint ||
+       bs->breakpoint_at->type == bp_access_watchpoint))
+    {
+      remove_breakpoints ();
+      insert_breakpoints ();
+    }
+  return bs;
+}
+
+/* Tell what to do about this bpstat.  */
+struct bpstat_what
+bpstat_what (bs)
+     bpstat bs;
+{
+  /* Classify each bpstat as one of the following.  */
+  enum class {
+    /* This bpstat element has no effect on the main_action.  */
+    no_effect = 0,
+
+    /* There was a watchpoint, stop but don't print.  */
+    wp_silent,
+
+    /* There was a watchpoint, stop and print.  */
+    wp_noisy,
+
+    /* There was a breakpoint but we're not stopping.  */
+    bp_nostop,
+
+    /* There was a breakpoint, stop but don't print.  */
+    bp_silent,
+
+    /* There was a breakpoint, stop and print.  */
+    bp_noisy,
+
+    /* We hit the longjmp breakpoint.  */
+    long_jump,
+
+    /* We hit the longjmp_resume breakpoint.  */
+    long_resume,
+
+    /* We hit the step_resume breakpoint.  */
+    step_resume,
+
+    /* We hit the through_sigtramp breakpoint.  */
+    through_sig,
+
+    /* We hit the shared library event breakpoint.  */
+    shlib_event,
+
+    /* We caught a shared library event.  */
+    catch_shlib_event,
+ 
+    /* This is just used to count how many enums there are.  */
+    class_last
+    };
+
+  /* Here is the table which drives this routine.  So that we can
+     format it pretty, we define some abbreviations for the
+     enum bpstat_what codes.  */
+#define kc BPSTAT_WHAT_KEEP_CHECKING
+#define ss BPSTAT_WHAT_STOP_SILENT
+#define sn BPSTAT_WHAT_STOP_NOISY
+#define sgl BPSTAT_WHAT_SINGLE
+#define slr BPSTAT_WHAT_SET_LONGJMP_RESUME
+#define clr BPSTAT_WHAT_CLEAR_LONGJMP_RESUME
+#define clrs BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE
+#define sr BPSTAT_WHAT_STEP_RESUME
+#define ts BPSTAT_WHAT_THROUGH_SIGTRAMP
+#define shl BPSTAT_WHAT_CHECK_SHLIBS
+#define shlr BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK
+
+/* "Can't happen."  Might want to print an error message.
+   abort() is not out of the question, but chances are GDB is just
+   a bit confused, not unusable.  */
+#define err BPSTAT_WHAT_STOP_NOISY
+
+  /* Given an old action and a class, come up with a new action.  */
+  /* One interesting property of this table is that wp_silent is the same
+     as bp_silent and wp_noisy is the same as bp_noisy.  That is because
+     after stopping, the check for whether to step over a breakpoint
+     (BPSTAT_WHAT_SINGLE type stuff) is handled in proceed() without
+     reference to how we stopped.  We retain separate wp_silent and bp_silent
+     codes in case we want to change that someday.  */
+
+  /* step_resume entries: a step resume breakpoint overrides another
+     breakpoint of signal handling (see comment in wait_for_inferior
+     at first IN_SIGTRAMP where we set the step_resume breakpoint).  */
+  /* We handle the through_sigtramp_breakpoint the same way; having both
+     one of those and a step_resume_breakpoint is probably very rare (?).  */
+
+  static const enum bpstat_what_main_action
+    table[(int)class_last][(int)BPSTAT_WHAT_LAST] =
+      {
+	/*                              old action */
+        /*       kc    ss    sn    sgl    slr   clr    clrs   sr    ts   shl   shlr
+         */
+/*no_effect*/   {kc,   ss,   sn,   sgl,   slr,  clr,   clrs,  sr,   ts,  shl,  shlr},
+/*wp_silent*/   {ss,   ss,   sn,   ss,    ss,   ss,    ss,    sr,   ts,  shl,  shlr},
+/*wp_noisy*/    {sn,   sn,   sn,   sn,    sn,   sn,    sn,    sr,   ts,  shl,  shlr},
+/*bp_nostop*/   {sgl,  ss,   sn,   sgl,   slr,  clrs,  clrs,  sr,   ts,  shl,  shlr},
+/*bp_silent*/   {ss,   ss,   sn,   ss,    ss,   ss,    ss,    sr,   ts,  shl,  shlr},
+/*bp_noisy*/    {sn,   sn,   sn,   sn,    sn,   sn,    sn,    sr,   ts,  shl,  shlr},
+/*long_jump*/   {slr,  ss,   sn,   slr,   err,  err,   err,   sr,   ts,  shl,  shlr},
+/*long_resume*/ {clr,  ss,   sn,   clrs,  err,  err,   err,   sr,   ts,  shl,  shlr},
+/*step_resume*/ {sr,   sr,   sr,   sr,    sr,   sr,    sr,    sr,   ts,  shl,  shlr},
+/*through_sig*/ {ts,   ts,   ts,   ts,    ts,   ts,    ts,    ts,   ts,  shl,  shlr},
+/*shlib*/       {shl,  shl,  shl,  shl,   shl,  shl,   shl,   shl,  ts,  shl,  shlr},
+/*catch_shlib*/ {shlr, shlr, shlr, shlr,  shlr, shlr,  shlr,  shlr, ts,  shlr, shlr}
+              };
+
+#undef kc
+#undef ss
+#undef sn
+#undef sgl
+#undef slr
+#undef clr
+#undef clrs
+#undef err
+#undef sr
+#undef ts
+#undef shl
+#undef shlr
+  enum bpstat_what_main_action current_action = BPSTAT_WHAT_KEEP_CHECKING;
+  struct bpstat_what retval;
+
+  retval.call_dummy = 0;
+  for (; bs != NULL; bs = bs->next)
+    {
+      enum class bs_class = no_effect;
+      if (bs->breakpoint_at == NULL)
+	/* I suspect this can happen if it was a momentary breakpoint
+	   which has since been deleted.  */
+	continue;
+      switch (bs->breakpoint_at->type)
+	{
+	case bp_none:
+	  continue;
+
+	case bp_breakpoint:
+	case bp_hardware_breakpoint:
+	case bp_until:
+	case bp_finish:
+	  if (bs->stop)
+	    {
+	      if (bs->print)
+		bs_class = bp_noisy;
+	      else
+		bs_class = bp_silent;
+	    }
+	  else
+	    bs_class = bp_nostop;
+	  break;
+	case bp_watchpoint:
+	case bp_hardware_watchpoint:
+	case bp_read_watchpoint:
+	case bp_access_watchpoint:
+	  if (bs->stop)
+	    {
+	      if (bs->print)
+		bs_class = wp_noisy;
+	      else
+		bs_class = wp_silent;
+	    }
+	  else
+	    /* There was a watchpoint, but we're not stopping.  This requires
+	       no further action.  */
+	    bs_class = no_effect;
+	  break;
+	case bp_longjmp:
+	  bs_class = long_jump;
+	  break;
+	case bp_longjmp_resume:
+	  bs_class = long_resume;
+	  break;
+	case bp_step_resume:
+	  if (bs->stop)
+	    {
+	      bs_class = step_resume;
+	    }
+	  else
+	    /* It is for the wrong frame.  */
+	    bs_class = bp_nostop;
+	  break;
+	case bp_through_sigtramp:
+	  bs_class = through_sig;
+	  break;
+	case bp_watchpoint_scope:
+	  bs_class = bp_nostop;
+	  break;
+	case bp_shlib_event:
+	  bs_class = shlib_event;
+	  break;
+        case bp_catch_load:
+        case bp_catch_unload:
+          /* Only if this catchpoint triggered should we cause the
+             step-out-of-dld behaviour.  Otherwise, we ignore this
+             catchpoint.  */
+          if (bs->stop)
+            bs_class = catch_shlib_event;
+          else
+            bs_class = no_effect;
+          break;
+        case bp_catch_fork:
+        case bp_catch_vfork:
+	case bp_catch_exec:
+          if (bs->stop)
+            {
+              if (bs->print)
+                bs_class = bp_noisy;
+              else
+                bs_class = bp_silent;
+            }
+          else
+            /* There was a catchpoint, but we're not stopping.  This requires
+               no further action.  */
+            bs_class = no_effect;
+          break;
+        case bp_catch_catch:
+          if (!bs->stop || CURRENT_EXCEPTION_KIND != EX_EVENT_CATCH)
+            bs_class = bp_nostop;
+          else if (bs->stop)
+            bs_class = bs->print ? bp_noisy : bp_silent;
+          break;
+        case bp_catch_throw:
+          if (!bs->stop || CURRENT_EXCEPTION_KIND != EX_EVENT_THROW)
+            bs_class = bp_nostop;
+          else if (bs->stop)
+            bs_class = bs->print ? bp_noisy : bp_silent;
+          break;
+	case bp_call_dummy:
+	  /* Make sure the action is stop (silent or noisy), so infrun.c
+	     pops the dummy frame.  */
+	  bs_class = bp_silent;
+	  retval.call_dummy = 1;
+	  break;
+	}
+      current_action = table[(int)bs_class][(int)current_action];
+    }
+  retval.main_action = current_action;
+  return retval;
+}
+
+/* Nonzero if we should step constantly (e.g. watchpoints on machines
+   without hardware support).  This isn't related to a specific bpstat,
+   just to things like whether watchpoints are set.  */
+
+int 
+bpstat_should_step ()
+{
+  struct breakpoint *b;
+  ALL_BREAKPOINTS (b)
+    if (b->enable == enabled && b->type == bp_watchpoint)
+      return 1;
+  return 0;
+}
+
+/* Nonzero if there are enabled hardware watchpoints. */
+int
+bpstat_have_active_hw_watchpoints ()
+{
+  struct breakpoint *b;
+  ALL_BREAKPOINTS (b)
+    if ((b->enable == enabled) &&
+        (b->inserted) &&
+        ((b->type == bp_hardware_watchpoint) ||
+         (b->type == bp_read_watchpoint) ||
+         (b->type == bp_access_watchpoint)))
+      return 1;
+  return 0;
+}
+
+
+/* Given a bpstat that records zero or more triggered eventpoints, this
+   function returns another bpstat which contains only the catchpoints
+   on that first list, if any. */
+void
+bpstat_get_triggered_catchpoints (ep_list, cp_list)
+  bpstat  ep_list;
+  bpstat *  cp_list;
+{
+  struct bpstats  root_bs[1];
+  bpstat  bs = root_bs;
+  struct breakpoint *  ep;
+  char *  dll_pathname;
+ 
+  bpstat_clear (cp_list);
+  root_bs->next = NULL;
+ 
+  for (; ep_list != NULL; ep_list = ep_list->next )
+    {
+      /* Is this eventpoint a catchpoint?  If not, ignore it. */
+      ep = ep_list->breakpoint_at;
+      if (ep == NULL)
+        break;
+      if ((ep->type != bp_catch_load) && 
+          (ep->type != bp_catch_unload) &&
+          (ep->type != bp_catch_catch) &&
+          (ep->type != bp_catch_throw))   /* pai: (temp) ADD fork/vfork here!!  */
+        continue;
+ 
+      /* Yes; add it to the list. */
+      bs = bpstat_alloc (ep, bs);
+      *bs = *ep_list;
+      bs->next = NULL;
+      bs = root_bs->next;
+ 
+#if defined(SOLIB_ADD)
+      /* Also, for each triggered catchpoint, tag it with the name of
+         the library that caused this trigger.  (We copy the name now,
+         because it's only guaranteed to be available NOW, when the
+         catchpoint triggers.  Clients who may wish to know the name
+         later must get it from the catchpoint itself.) */
+      if (ep->triggered_dll_pathname != NULL)
+        free (ep->triggered_dll_pathname);
+      if (ep->type == bp_catch_load)
+        dll_pathname = SOLIB_LOADED_LIBRARY_PATHNAME (inferior_pid);
+      else
+        dll_pathname = SOLIB_UNLOADED_LIBRARY_PATHNAME (inferior_pid);
+#else
+      dll_pathname = NULL;
+#endif
+      if (dll_pathname)
+	{
+	  ep->triggered_dll_pathname = (char *) xmalloc (strlen (dll_pathname) + 1);
+	  strcpy (ep->triggered_dll_pathname, dll_pathname);
+	}
+      else
+	ep->triggered_dll_pathname = NULL;
+    }
+ 
+  *cp_list = bs;
+}
+
+/* Print information on breakpoint number BNUM, or -1 if all.
+   If WATCHPOINTS is zero, process only breakpoints; if WATCHPOINTS
+   is nonzero, process only watchpoints.  */
+
+typedef struct {
+  enum bptype  type;
+  char *  description;
+} ep_type_description_t;
+
+static void
+breakpoint_1 (bnum, allflag)
+     int bnum;
+     int allflag;
+{
+  register struct breakpoint *b;
+  register struct command_line *l;
+  register struct symbol *sym;
+  CORE_ADDR last_addr = (CORE_ADDR)-1;
+  int found_a_breakpoint = 0;
+  static ep_type_description_t  bptypes[] =
+  {
+    {bp_none,                "?deleted?"},
+    {bp_breakpoint,          "breakpoint"},
+    {bp_hardware_breakpoint, "hw breakpoint"},
+    {bp_until,               "until"},
+    {bp_finish,              "finish"},
+    {bp_watchpoint,          "watchpoint"},
+    {bp_hardware_watchpoint, "hw watchpoint"},
+    {bp_read_watchpoint,     "read watchpoint"},
+    {bp_access_watchpoint,   "acc watchpoint"},
+    {bp_longjmp,             "longjmp"},
+    {bp_longjmp_resume,      "longjmp resume"},
+    {bp_step_resume,         "step resume"},
+    {bp_through_sigtramp,    "sigtramp"},
+    {bp_watchpoint_scope,    "watchpoint scope"},
+    {bp_call_dummy,          "call dummy"},
+    {bp_shlib_event,         "shlib events"},
+    {bp_catch_load,          "catch load"},
+    {bp_catch_unload,        "catch unload"},
+    {bp_catch_fork,          "catch fork"},
+    {bp_catch_vfork,         "catch vfork"},
+    {bp_catch_exec,          "catch exec"},
+    {bp_catch_catch,         "catch catch"},
+    {bp_catch_throw,         "catch throw"}
+   };
+
+  static char *bpdisps[] = {"del", "dstp", "dis", "keep"};
+  static char bpenables[] = "nyn";
+  char wrap_indent[80];
+
+  ALL_BREAKPOINTS (b)
+    if (bnum == -1
+	|| bnum == b->number)
+      {
+/*  We only print out user settable breakpoints unless the allflag is set. */
+	if (!allflag
+	    && b->type != bp_breakpoint
+            && b->type != bp_catch_load
+            && b->type != bp_catch_unload
+            && b->type != bp_catch_fork
+            && b->type != bp_catch_vfork
+            && b->type != bp_catch_exec
+	    && b->type != bp_catch_catch
+	    && b->type != bp_catch_throw
+	    && b->type != bp_hardware_breakpoint
+	    && b->type != bp_watchpoint
+	    && b->type != bp_read_watchpoint
+	    && b->type != bp_access_watchpoint
+	    && b->type != bp_hardware_watchpoint)
+	  continue;
+
+	if (!found_a_breakpoint++)
+	  {
+            annotate_breakpoints_headers ();
+  
+            annotate_field (0);
+            printf_filtered ("Num ");
+            annotate_field (1);
+            printf_filtered ("Type           ");
+            annotate_field (2);
+            printf_filtered ("Disp ");
+            annotate_field (3);
+            printf_filtered ("Enb ");
+            if (addressprint)
+              {
+                annotate_field (4);
+                printf_filtered ("Address    ");
+              }
+            annotate_field (5);
+            printf_filtered ("What\n");
+  
+            annotate_breakpoints_table ();
+          }
+  
+        annotate_record ();
+        annotate_field (0);
+        printf_filtered ("%-3d ", b->number);
+        annotate_field (1);
+        if ((int)b->type > (sizeof(bptypes)/sizeof(bptypes[0])))
+          error ("bptypes table does not describe type #%d.", (int)b->type);
+        if ((int)b->type != bptypes[(int)b->type].type)
+          error ("bptypes table does not describe type #%d?", (int)b->type);
+        printf_filtered ("%-14s ", bptypes[(int)b->type].description);
+        annotate_field (2);
+        printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
+        annotate_field (3);
+	printf_filtered ("%-3c ", bpenables[(int)b->enable]);
+
+	strcpy (wrap_indent, "                           ");
+	if (addressprint)
+	  strcat (wrap_indent, "           ");
+	switch (b->type)
+	  {
+	  case bp_watchpoint:
+	  case bp_hardware_watchpoint:
+	  case bp_read_watchpoint:
+	  case bp_access_watchpoint:
+	    /* Field 4, the address, is omitted (which makes the columns
+	       not line up too nicely with the headers, but the effect
+	       is relatively readable).  */
+	    annotate_field (5);
+	    print_expression (b->exp, gdb_stdout);
+	    break;
+ 
+          case bp_catch_load:
+          case bp_catch_unload:
+            /* Field 4, the address, is omitted (which makes the columns
+               not line up too nicely with the headers, but the effect
+               is relatively readable).  */
+            annotate_field (5);
+            if (b->dll_pathname == NULL)
+              printf_filtered ("<any library> ");
+            else
+              printf_filtered ("library \"%s\" ", b->dll_pathname);
+            break;
+
+          case bp_catch_fork:
+          case bp_catch_vfork:
+	    /* Field 4, the address, is omitted (which makes the columns
+	       not line up too nicely with the headers, but the effect
+	       is relatively readable).  */
+	    annotate_field (5);
+	    if (b->forked_inferior_pid != 0)
+	      printf_filtered ("process %d ", b->forked_inferior_pid);
+            break;
+
+          case bp_catch_exec:
+	    /* Field 4, the address, is omitted (which makes the columns
+	       not line up too nicely with the headers, but the effect
+	       is relatively readable).  */
+	    annotate_field (5);
+	    if (b->exec_pathname != NULL)
+	      printf_filtered ("program \"%s\" ", b->exec_pathname);
+            break;
+          case bp_catch_catch:
+	    /* Field 4, the address, is omitted (which makes the columns
+	       not line up too nicely with the headers, but the effect
+	       is relatively readable).  */
+	    annotate_field (5);
+            printf_filtered ("exception catch ");
+            break;
+          case bp_catch_throw:
+	    /* Field 4, the address, is omitted (which makes the columns
+	       not line up too nicely with the headers, but the effect
+	       is relatively readable).  */
+	    annotate_field (5);
+            printf_filtered ("exception throw ");
+            break;
+
+	  case bp_breakpoint:
+	  case bp_hardware_breakpoint:
+	  case bp_until:
+	  case bp_finish:
+	  case bp_longjmp:
+	  case bp_longjmp_resume:
+	  case bp_step_resume:
+	  case bp_through_sigtramp:
+	  case bp_watchpoint_scope:
+	  case bp_call_dummy:
+	  case bp_shlib_event:
+	    if (addressprint)
+	      {
+	        annotate_field (4);
+		/* FIXME-32x64: need a print_address_numeric with
+                   field width */
+		printf_filtered
+		  ("%s ",
+		   local_hex_string_custom
+		   ((unsigned long) b->address, "08l"));
+	      }
+
+	    annotate_field (5);
+
+	    last_addr = b->address;
+	    if (b->source_file)
+	      {
+		sym = find_pc_sect_function (b->address, b->section);
+		if (sym)
+		  {
+		    fputs_filtered ("in ", gdb_stdout);
+		    fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
+		    wrap_here (wrap_indent);
+		    fputs_filtered (" at ", gdb_stdout);
+		  }
+		fputs_filtered (b->source_file, gdb_stdout);
+		printf_filtered (":%d", b->line_number);
+	      }
+	    else
+	      print_address_symbolic (b->address, gdb_stdout, demangle, " ");
+	    break;
+	  }
+
+        if (b->thread != -1)
+            printf_filtered (" thread %d", b->thread );
+
+	printf_filtered ("\n");
+
+	if (b->frame)
+	  {
+            annotate_field (6);
+
+	    printf_filtered ("\tstop only in stack frame at ");
+	    print_address_numeric (b->frame, 1, gdb_stdout);
+	    printf_filtered ("\n");
+	  }
+
+	if (b->cond)
+	  {
+            annotate_field (7);
+
+	    printf_filtered ("\tstop only if ");
+	    print_expression (b->cond, gdb_stdout);
+	    printf_filtered ("\n");
+	  }
+
+	if (b->thread != -1)
+	  {
+	    /* FIXME should make an annotation for this */
+	    printf_filtered ("\tstop only in thread %d\n", b->thread);
+	  }
+
+        if (show_breakpoint_hit_counts && b->hit_count)
+	  {
+	    /* FIXME should make an annotation for this */
+            if (ep_is_catchpoint (b))
+              printf_filtered ("\tcatchpoint");
+            else
+              printf_filtered ("\tbreakpoint");
+            printf_filtered (" already hit %d time%s\n",
+                             b->hit_count, (b->hit_count == 1 ? "" : "s"));
+	  }
+
+	if (b->ignore_count)
+	  {
+            annotate_field (8);
+
+	    printf_filtered ("\tignore next %d hits\n", b->ignore_count);
+	  }
+
+	if ((l = b->commands))
+	  {
+            annotate_field (9);
+
+	    while (l)
+	      {
+		print_command_line (l, 4);
+		l = l->next;
+	      }
+	  }
+      }
+
+  if (!found_a_breakpoint)
+    {
+      if (bnum == -1)
+        printf_filtered ("No breakpoints or watchpoints.\n");
+      else
+        printf_filtered ("No breakpoint or watchpoint number %d.\n", bnum);
+    }
+  else
+    /* Compare against (CORE_ADDR)-1 in case some compiler decides
+       that a comparison of an unsigned with -1 is always false.  */
+    if (last_addr != (CORE_ADDR)-1)
+      set_next_address (last_addr);
+
+  annotate_breakpoints_table_end ();
+}
+
+/* ARGSUSED */
+static void
+breakpoints_info (bnum_exp, from_tty)
+     char *bnum_exp;
+     int from_tty;
+{
+  int bnum = -1;
+
+  if (bnum_exp)
+    bnum = parse_and_eval_address (bnum_exp);
+
+  breakpoint_1 (bnum, 0);
+}
+
+#if MAINTENANCE_CMDS
+
+/* ARGSUSED */
+void
+maintenance_info_breakpoints (bnum_exp, from_tty)
+     char *bnum_exp;
+     int from_tty;
+{
+  int bnum = -1;
+
+  if (bnum_exp)
+    bnum = parse_and_eval_address (bnum_exp);
+
+  breakpoint_1 (bnum, 1);
+}
+
+#endif
+
+/* Print a message describing any breakpoints set at PC.  */
+
+static void
+describe_other_breakpoints (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  register int others = 0;
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->address == pc)
+      if (overlay_debugging == 0 ||
+	  b->section == section)
+	others++;
+  if (others > 0)
+    {
+      printf_filtered ("Note: breakpoint%s ", (others > 1) ? "s" : "");
+      ALL_BREAKPOINTS (b)
+	if (b->address == pc)
+	  if (overlay_debugging == 0 ||
+	      b->section == section)
+	    {
+	      others--;
+	      printf_filtered
+		("%d%s%s ",
+		 b->number,
+		 ((b->enable == disabled || b->enable == shlib_disabled || b->enable == call_disabled)
+		  ? " (disabled)" : ""),
+		 (others > 1) ? "," : ((others == 1) ? " and" : ""));
+	    }
+      printf_filtered ("also set at pc ");
+      print_address_numeric (pc, 1, gdb_stdout);
+      printf_filtered (".\n");
+    }
+}
+
+/* Set the default place to put a breakpoint
+   for the `break' command with no arguments.  */
+
+void
+set_default_breakpoint (valid, addr, symtab, line)
+     int valid;
+     CORE_ADDR addr;
+     struct symtab *symtab;
+     int line;
+{
+  default_breakpoint_valid = valid;
+  default_breakpoint_address = addr;
+  default_breakpoint_symtab = symtab;
+  default_breakpoint_line = line;
+}
+
+/* Rescan breakpoints at address ADDRESS,
+   marking the first one as "first" and any others as "duplicates".
+   This is so that the bpt instruction is only inserted once.  */
+
+static void
+check_duplicates (address, section)
+     CORE_ADDR address;
+     asection *section;
+{
+  register struct breakpoint *b;
+  register int count = 0;
+
+  if (address == 0)		/* Watchpoints are uninteresting */
+    return;
+
+  ALL_BREAKPOINTS (b)
+    if (b->enable != disabled
+	&& b->enable != shlib_disabled
+	&& b->enable != call_disabled
+	&& b->address == address
+	&& (overlay_debugging == 0 || b->section == section))
+      {
+	count++;
+	b->duplicate = count > 1;
+      }
+}
+
+/* Low level routine to set a breakpoint.
+   Takes as args the three things that every breakpoint must have.
+   Returns the breakpoint object so caller can set other things.
+   Does not set the breakpoint number!
+   Does not print anything.
+
+   ==> This routine should not be called if there is a chance of later
+   error(); otherwise it leaves a bogus breakpoint on the chain.  Validate
+   your arguments BEFORE calling this routine!  */
+
+struct breakpoint *
+set_raw_breakpoint (sal)
+     struct symtab_and_line sal;
+{
+  register struct breakpoint *b, *b1;
+
+  b = (struct breakpoint *) xmalloc (sizeof (struct breakpoint));
+  memset (b, 0, sizeof (*b));
+  b->address = sal.pc;
+  if (sal.symtab == NULL)
+    b->source_file = NULL;
+  else
+    b->source_file = savestring (sal.symtab->filename,
+				 strlen (sal.symtab->filename));
+  b->section = sal.section;
+  b->language = current_language->la_language;
+  b->input_radix = input_radix;
+  b->thread = -1;
+  b->line_number = sal.line;
+  b->enable = enabled;
+  b->next = 0;
+  b->silent = 0;
+  b->ignore_count = 0;
+  b->commands = NULL;
+  b->frame = 0;
+  b->dll_pathname = NULL;
+  b->triggered_dll_pathname = NULL;
+  b->forked_inferior_pid = 0;
+  b->exec_pathname = NULL;
+
+  /* Add this breakpoint to the end of the chain
+     so that a list of breakpoints will come out in order
+     of increasing numbers.  */
+
+  b1 = breakpoint_chain;
+  if (b1 == 0)
+    breakpoint_chain = b;
+  else
+    {
+      while (b1->next)
+	b1 = b1->next;
+      b1->next = b;
+    }
+
+  check_duplicates (sal.pc, sal.section);
+  breakpoints_changed ();
+
+  return b;
+}
+
+#ifdef GET_LONGJMP_TARGET
+
+static void
+create_longjmp_breakpoint (func_name)
+     char *func_name;
+{
+  struct symtab_and_line sal;
+  struct breakpoint *b;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+  if (func_name != NULL)
+    {
+      struct minimal_symbol *m;
+
+      m = lookup_minimal_symbol_text (func_name, NULL, (struct objfile *)NULL);
+      if (m)
+	sal.pc = SYMBOL_VALUE_ADDRESS (m);
+      else
+	return;
+    }
+  sal.section = find_pc_overlay (sal.pc);
+  b = set_raw_breakpoint (sal);
+  if (!b) return;
+
+  b->type = func_name != NULL ? bp_longjmp : bp_longjmp_resume;
+  b->disposition = donttouch;
+  b->enable = disabled;
+  b->silent = 1;
+  if (func_name)
+    b->addr_string = strsave(func_name);
+  b->number = internal_breakpoint_number--;
+}
+
+#endif	/* #ifdef GET_LONGJMP_TARGET */
+
+/* Call this routine when stepping and nexting to enable a breakpoint if we do
+   a longjmp().  When we hit that breakpoint, call
+   set_longjmp_resume_breakpoint() to figure out where we are going. */
+
+void
+enable_longjmp_breakpoint()
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->type == bp_longjmp)
+      {
+	b->enable = enabled;
+	check_duplicates (b->address, b->section);
+      }
+}
+
+void
+disable_longjmp_breakpoint()
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (   b->type == bp_longjmp
+	|| b->type == bp_longjmp_resume)
+      {
+	b->enable = disabled;
+	check_duplicates (b->address, b->section);
+      }
+}
+
+#ifdef SOLIB_ADD
+void
+remove_solib_event_breakpoints ()
+{
+  register struct breakpoint *b, *temp;
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    if (b->type == bp_shlib_event)
+      delete_breakpoint (b);
+}
+
+void
+create_solib_event_breakpoint (address)
+     CORE_ADDR address;
+{
+  struct breakpoint *b;
+  struct symtab_and_line sal;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+  sal.pc = address;
+  sal.section = find_pc_overlay (sal.pc);
+  b = set_raw_breakpoint (sal);
+  b->number = internal_breakpoint_number--;
+  b->disposition = donttouch;
+  b->type = bp_shlib_event;
+}
+
+void
+disable_breakpoints_in_shlibs (silent)
+     int silent;
+{
+  struct breakpoint *  b;
+  int  disabled_shlib_breaks = 0;
+
+  /* See also: insert_breakpoints, under DISABLE_UNSETTABLE_BREAK. */
+  ALL_BREAKPOINTS (b)
+    {
+#if defined (PC_SOLIB)
+      if (((b->type == bp_breakpoint) ||
+           (b->type == bp_hardware_breakpoint)) &&
+          (b->enable != shlib_disabled) &&
+          (b->enable != call_disabled) &&
+          ! b->duplicate &&
+          PC_SOLIB (b->address))
+        {
+          b->enable = shlib_disabled;
+	  if (!silent)
+	    {
+	      if (!disabled_shlib_breaks)
+		{
+		  target_terminal_ours_for_output ();
+		  printf_filtered ("Temporarily disabling shared library breakpoints:\n");
+		}
+	      disabled_shlib_breaks = 1;
+	      printf_filtered ("%d ", b->number);
+	    }
+        }
+#endif
+    }
+  if (disabled_shlib_breaks && !silent)
+    printf_filtered ("\n");
+}
+
+/* Try to reenable any breakpoints in shared libraries.  */
+void
+re_enable_breakpoints_in_shlibs ()
+{
+  struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->enable == shlib_disabled)
+      {
+	char buf[1];
+
+	/* Do not reenable the breakpoint if the shared library
+	   is still not mapped in.  */
+	if (target_read_memory (b->address, buf, 1) == 0)
+	  b->enable = enabled;
+      }
+}
+
+#endif
+
+static void
+create_solib_load_unload_event_breakpoint (hookname, tempflag, dll_pathname, cond_string, bp_kind)
+  char *  hookname;
+  int  tempflag;
+  char *  dll_pathname;
+  char *  cond_string;
+  enum bptype  bp_kind;
+{
+  struct breakpoint *  b;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line  sal;
+  struct cleanup *  old_chain;
+  struct cleanup *  canonical_strings_chain = NULL;
+  int  i;
+  char *  addr_start = hookname;
+  char *  addr_end = NULL;
+  char **  canonical = (char **) NULL;
+  int  thread = -1;  /* All threads. */
+ 
+  /* Set a breakpoint on the specified hook. */
+  sals = decode_line_1 (&hookname, 1, (struct symtab *) NULL, 0, &canonical);
+  addr_end = hookname;
+ 
+  if (sals.nelts == 0)
+    {
+      warning ("Unable to set a breakpoint on dynamic linker callback.");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      return;
+    }
+  if (sals.nelts != 1)
+    {
+      warning ("Unable to set a unique breakpoint on dynamic linker callback.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      return;
+    }
+
+  /* Make sure that all storage allocated in decode_line_1 gets freed in case
+     the following errors out.  */
+  old_chain = make_cleanup (free, sals.sals);
+  if (canonical != (char **)NULL)
+    {
+      make_cleanup (free, canonical);
+      canonical_strings_chain = make_cleanup (null_cleanup, 0);
+      if (canonical[0] != NULL)
+        make_cleanup (free, canonical[0]);
+    }
+ 
+  resolve_sal_pc (&sals.sals[0]);
+ 
+  /* Remove the canonical strings from the cleanup, they are needed below.  */
+  if (canonical != (char **)NULL)
+    discard_cleanups (canonical_strings_chain);
+ 
+  b = set_raw_breakpoint (sals.sals[0]);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->cond = NULL;
+  b->cond_string = (cond_string == NULL) ? NULL : savestring (cond_string, strlen (cond_string));
+  b->thread = thread;
+ 
+  if (canonical != (char **)NULL && canonical[0] != NULL)
+    b->addr_string = canonical[0];
+  else if (addr_start)
+    b->addr_string = savestring (addr_start, addr_end - addr_start);
+ 
+  b->enable = enabled;
+  b->disposition = tempflag ? del : donttouch;
+ 
+  if (dll_pathname == NULL)
+    b->dll_pathname = NULL;
+  else
+    {
+      b->dll_pathname = (char *) xmalloc (strlen (dll_pathname) + 1);
+      strcpy (b->dll_pathname, dll_pathname);
+    }
+  b->type = bp_kind;
+ 
+  mention (b);
+  do_cleanups (old_chain);
+}
+
+void
+create_solib_load_event_breakpoint (hookname, tempflag, dll_pathname, cond_string)
+  char *  hookname;
+  int  tempflag;
+  char *  dll_pathname;
+  char *  cond_string;
+{
+  create_solib_load_unload_event_breakpoint (hookname,
+                                             tempflag,
+                                             dll_pathname,
+                                             cond_string,
+                                             bp_catch_load);
+}
+
+void
+create_solib_unload_event_breakpoint (hookname, tempflag, dll_pathname, cond_string)
+  char *  hookname;
+  int  tempflag;
+  char *  dll_pathname;
+  char *  cond_string;
+{
+  create_solib_load_unload_event_breakpoint (hookname,
+                                             tempflag,
+                                             dll_pathname,
+                                             cond_string,
+                                             bp_catch_unload);
+}
+
+static void
+create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_kind)
+  int  tempflag;
+  char *  cond_string;
+  enum bptype  bp_kind;
+{
+  struct symtab_and_line  sal;
+  struct breakpoint *  b;
+  int  thread = -1;  /* All threads. */
+ 
+  INIT_SAL(&sal);
+  sal.pc = 0;
+  sal.symtab = NULL;
+  sal.line = 0;
+ 
+  b = set_raw_breakpoint (sal);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->cond = NULL;
+  b->cond_string = (cond_string == NULL) ? NULL : savestring (cond_string, strlen (cond_string));
+  b->thread = thread;
+  b->addr_string = NULL;
+  b->enable = enabled;
+  b->disposition = tempflag ? del : donttouch;
+  b->forked_inferior_pid = 0;
+ 
+  b->type = bp_kind;
+ 
+  mention (b);
+}
+
+void
+create_fork_event_catchpoint (tempflag, cond_string)
+  int  tempflag;
+  char *  cond_string;
+{
+  create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_fork);
+}
+ 
+void
+create_vfork_event_catchpoint (tempflag, cond_string)
+  int  tempflag;
+  char *  cond_string;
+{
+  create_fork_vfork_event_catchpoint (tempflag, cond_string, bp_catch_vfork);
+}
+
+void
+create_exec_event_catchpoint (tempflag, cond_string)
+  int  tempflag;
+  char *  cond_string;
+{
+  struct symtab_and_line  sal;
+  struct breakpoint *  b;
+  int  thread = -1;  /* All threads. */
+
+  INIT_SAL(&sal);
+  sal.pc = 0;
+  sal.symtab = NULL;
+  sal.line = 0;
+
+  b = set_raw_breakpoint (sal);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->cond = NULL;
+  b->cond_string = (cond_string == NULL) ? NULL : savestring (cond_string, strlen (cond_string));
+  b->thread = thread;
+  b->addr_string = NULL;
+  b->enable = enabled;
+  b->disposition = tempflag ? del : donttouch;
+
+  b->type = bp_catch_exec;
+
+  mention (b);
+}
+
+static int
+hw_breakpoint_used_count()
+{
+  register struct breakpoint *b;
+  int i = 0;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->type == bp_hardware_breakpoint && b->enable == enabled)
+	i++;
+    }
+
+  return i;
+}
+
+static int
+hw_watchpoint_used_count(type, other_type_used)
+    enum bptype type;
+    int *other_type_used;
+{
+  register struct breakpoint *b;
+  int i = 0;
+
+  *other_type_used = 0;
+  ALL_BREAKPOINTS (b)
+    {
+      if (b->enable == enabled)
+	{
+          if (b->type == type) i++;
+          else if ((b->type == bp_hardware_watchpoint ||
+	       b->type == bp_read_watchpoint ||
+	       b->type == bp_access_watchpoint)
+	       && b->enable == enabled)
+	    *other_type_used = 1;
+        }
+    }
+  return i;
+}
+
+/* Call this after hitting the longjmp() breakpoint.  Use this to set a new
+   breakpoint at the target of the jmp_buf.
+
+   FIXME - This ought to be done by setting a temporary breakpoint that gets
+   deleted automatically... */
+
+void
+set_longjmp_resume_breakpoint(pc, frame)
+     CORE_ADDR pc;
+     struct frame_info *frame;
+{
+  register struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    if (b->type == bp_longjmp_resume)
+      {
+	b->address = pc;
+	b->enable = enabled;
+	if (frame != NULL)
+	  b->frame = frame->frame;
+	else
+	  b->frame = 0;
+	check_duplicates (b->address, b->section);
+	return;
+      }
+}
+
+void
+disable_watchpoints_before_interactive_call_start ()
+{
+  struct breakpoint *  b;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if (((b->type == bp_watchpoint)
+           || (b->type == bp_hardware_watchpoint)
+           || (b->type == bp_read_watchpoint)
+           || (b->type == bp_access_watchpoint)
+           || ep_is_exception_catchpoint (b))
+          && (b->enable == enabled))
+        {
+          b->enable = call_disabled;
+          check_duplicates (b->address, b->section);
+        }
+    }
+}
+
+void
+enable_watchpoints_after_interactive_call_stop ()
+{
+  struct breakpoint *  b;
+
+  ALL_BREAKPOINTS (b)
+    {
+      if (((b->type == bp_watchpoint)
+           || (b->type == bp_hardware_watchpoint)
+           || (b->type == bp_read_watchpoint)
+           || (b->type == bp_access_watchpoint)
+           || ep_is_exception_catchpoint (b))
+          && (b->enable == call_disabled))
+        {
+          b->enable = enabled;
+          check_duplicates (b->address, b->section);
+        }
+    }
+}
+
+
+/* Set a breakpoint that will evaporate an end of command
+   at address specified by SAL.
+   Restrict it to frame FRAME if FRAME is nonzero.  */
+
+struct breakpoint *
+set_momentary_breakpoint (sal, frame, type)
+     struct symtab_and_line sal;
+     struct frame_info *frame;
+     enum bptype type;
+{
+  register struct breakpoint *b;
+  b = set_raw_breakpoint (sal);
+  b->type = type;
+  b->enable = enabled;
+  b->disposition = donttouch;
+  b->frame = (frame ? frame->frame : 0);
+
+  /* If we're debugging a multi-threaded program, then we
+     want momentary breakpoints to be active in only a 
+     single thread of control.  */
+  if (in_thread_list (inferior_pid))
+    b->thread = pid_to_thread_id (inferior_pid);
+
+  return b;
+}
+
+
+/* Tell the user we have just set a breakpoint B.  */
+
+static void
+mention (b)
+     struct breakpoint *b;
+{
+  int say_where = 0;
+
+  /* FIXME: This is misplaced; mention() is called by things (like hitting a
+     watchpoint) other than breakpoint creation.  It should be possible to
+     clean this up and at the same time replace the random calls to
+     breakpoint_changed with this hook, as has already been done for
+     delete_breakpoint_hook and so on.  */
+  if (create_breakpoint_hook)
+    create_breakpoint_hook (b);
+
+  switch (b->type)
+    {
+    case bp_none:
+      printf_filtered ("(apparently deleted?) Eventpoint %d: ", b->number);
+      break;
+    case bp_watchpoint:
+      printf_filtered ("Watchpoint %d: ", b->number);
+      print_expression (b->exp, gdb_stdout);
+      break;
+    case bp_hardware_watchpoint:
+      printf_filtered ("Hardware watchpoint %d: ", b->number);
+      print_expression (b->exp, gdb_stdout);
+      break;
+    case bp_read_watchpoint:
+      printf_filtered ("Hardware read watchpoint %d: ", b->number);
+      print_expression (b->exp, gdb_stdout);
+      break;
+    case bp_access_watchpoint:
+      printf_filtered ("Hardware access (read/write) watchpoint %d: ",b->number);
+      print_expression (b->exp, gdb_stdout);
+      break;
+    case bp_breakpoint:
+      printf_filtered ("Breakpoint %d", b->number);
+      say_where = 1;
+      break;
+    case bp_hardware_breakpoint:
+      printf_filtered ("Hardware assisted breakpoint %d", b->number);
+      say_where = 1;
+      break;
+    case bp_catch_load:
+    case bp_catch_unload:
+      printf_filtered ("Catchpoint %d (%s %s)",
+                       b->number,
+                       (b->type == bp_catch_load) ? "load" : "unload",
+                       (b->dll_pathname != NULL) ? b->dll_pathname : "<any library>");
+      break;
+    case bp_catch_fork:
+    case bp_catch_vfork:
+      printf_filtered ("Catchpoint %d (%s)",
+                       b->number,
+                       (b->type == bp_catch_fork) ? "fork" : "vfork");
+      break;
+    case bp_catch_exec:
+      printf_filtered ("Catchpoint %d (exec)",
+                       b->number);
+      break;
+    case bp_catch_catch:
+    case bp_catch_throw:
+      printf_filtered ("Catchpoint %d (%s)",
+                       b->number,
+                       (b->type == bp_catch_catch) ? "catch" : "throw");
+      break;
+
+    case bp_until:
+    case bp_finish:
+    case bp_longjmp:
+    case bp_longjmp_resume:
+    case bp_step_resume:
+    case bp_through_sigtramp:
+    case bp_call_dummy:
+    case bp_watchpoint_scope:
+    case bp_shlib_event:
+      break;
+    }
+  if (say_where)
+    {
+      if (addressprint || b->source_file == NULL)
+	{
+	  printf_filtered (" at ");
+	  print_address_numeric (b->address, 1, gdb_stdout);
+	}
+      if (b->source_file)
+	printf_filtered (": file %s, line %d.",
+			 b->source_file, b->line_number);
+      TUIDO(((TuiOpaqueFuncPtr)tui_vAllSetHasBreakAt, b, 1));
+      TUIDO(((TuiOpaqueFuncPtr)tuiUpdateAllExecInfos));
+    }
+  printf_filtered ("\n");
+}
+
+
+/* Set a breakpoint according to ARG (function, linenum or *address)
+   flag: first bit  : 0 non-temporary, 1 temporary.
+	 second bit : 0 normal breakpoint, 1 hardware breakpoint. */
+
+static void
+break_command_1 (arg, flag, from_tty)
+     char *arg;
+     int flag, from_tty;
+{
+  int tempflag, hardwareflag;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  register struct expression *cond = 0;
+  register struct breakpoint *b;
+
+  /* Pointers in arg to the start, and one past the end, of the condition.  */
+  char *cond_start = NULL;
+  char *cond_end = NULL;
+  /* Pointers in arg to the start, and one past the end,
+     of the address part.  */
+  char *addr_start = NULL;
+  char *addr_end = NULL;
+  struct cleanup *old_chain;
+  struct cleanup *canonical_strings_chain = NULL;
+  char **canonical = (char **)NULL;
+  int i;
+  int thread;
+
+  hardwareflag = flag & BP_HARDWAREFLAG;
+  tempflag = flag & BP_TEMPFLAG;
+
+  sals.sals = NULL;
+  sals.nelts = 0;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+
+  /* If no arg given, or if first arg is 'if ', use the default breakpoint. */
+
+  if (!arg || (arg[0] == 'i' && arg[1] == 'f' 
+	       && (arg[2] == ' ' || arg[2] == '\t')))
+    {
+      if (default_breakpoint_valid)
+	{
+	  sals.sals = (struct symtab_and_line *) 
+	    xmalloc (sizeof (struct symtab_and_line));
+	  sal.pc = default_breakpoint_address;
+	  sal.line = default_breakpoint_line;
+	  sal.symtab = default_breakpoint_symtab;
+	  sal.section  = find_pc_overlay (sal.pc);
+	  sals.sals[0] = sal;
+	  sals.nelts = 1;
+	}
+      else
+	error ("No default breakpoint address now.");
+    }
+  else
+    {
+      addr_start = arg;
+
+      /* Force almost all breakpoints to be in terms of the
+	 current_source_symtab (which is decode_line_1's default).  This
+	 should produce the results we want almost all of the time while
+	 leaving default_breakpoint_* alone.  */
+      if (default_breakpoint_valid
+	  && (!current_source_symtab
+	      || (arg && (*arg == '+' || *arg == '-'))))
+	sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
+			      default_breakpoint_line, &canonical);
+      else
+	sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, &canonical);
+
+      addr_end = arg;
+    }
+  
+  if (! sals.nelts) 
+    return;
+
+  /* Make sure that all storage allocated in decode_line_1 gets freed in case
+     the following `for' loop errors out.  */
+  old_chain = make_cleanup (free, sals.sals);
+  if (canonical != (char **)NULL)
+    {
+      make_cleanup (free, canonical);
+      canonical_strings_chain = make_cleanup (null_cleanup, 0);
+      for (i = 0; i < sals.nelts; i++)
+	{
+	  if (canonical[i] != NULL)
+	    make_cleanup (free, canonical[i]);
+	}
+    }
+
+  thread = -1;			/* No specific thread yet */
+
+  /* Resolve all line numbers to PC's, and verify that conditions
+     can be parsed, before setting any breakpoints.  */
+  for (i = 0; i < sals.nelts; i++)
+    {
+      char *tok, *end_tok;
+      int toklen;
+
+      resolve_sal_pc (&sals.sals[i]);
+
+      /* It's possible for the PC to be nonzero, but still an illegal
+         value on some targets.
+
+         For example, on HP-UX if you start gdb, and before running the
+         inferior you try to set a breakpoint on a shared library function
+         "foo" where the inferior doesn't call "foo" directly but does
+         pass its address to another function call, then we do find a
+         minimal symbol for the "foo", but it's address is invalid.
+         (Appears to be an index into a table that the loader sets up
+         when the inferior is run.)
+
+         Give the target a chance to bless sals.sals[i].pc before we
+         try to make a breakpoint for it. */
+      if (PC_REQUIRES_RUN_BEFORE_USE(sals.sals[i].pc))
+        {
+          error ("Cannot break on %s without a running program.", addr_start);
+        }
+      
+      tok = arg;
+
+      while (tok && *tok)
+	{
+	  while (*tok == ' ' || *tok == '\t')
+	    tok++;
+
+	  end_tok = tok;
+
+	  while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+	    end_tok++;
+
+	  toklen = end_tok - tok;
+
+	  if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+	    {
+	      tok = cond_start = end_tok + 1;
+	      cond = parse_exp_1 (&tok, block_for_pc (sals.sals[i].pc), 0);
+	      cond_end = tok;
+	    }
+	  else if (toklen >= 1 && strncmp (tok, "thread", toklen) == 0)
+	    {
+	      char *tmptok;
+
+	      tok = end_tok + 1;
+	      tmptok = tok;
+	      thread = strtol (tok, &tok, 0);
+	      if (tok == tmptok)
+		error ("Junk after thread keyword.");
+	      if (!valid_thread_id (thread))
+		error ("Unknown thread %d\n", thread);
+	    }
+	  else
+	    error ("Junk at end of arguments.");
+	}
+    }
+  if (hardwareflag)
+    {
+      int i, target_resources_ok;
+
+      i = hw_breakpoint_used_count ();  
+      target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT (
+		bp_hardware_breakpoint, i + sals.nelts, 0);
+      if (target_resources_ok == 0)
+	error ("No hardware breakpoint support in the target.");
+      else if (target_resources_ok < 0)
+        error ("Hardware breakpoints used exceeds limit.");
+    }
+
+  /* Remove the canonical strings from the cleanup, they are needed below.  */
+  if (canonical != (char **)NULL)
+    discard_cleanups (canonical_strings_chain);
+
+  /* Now set all the breakpoints.  */
+  for (i = 0; i < sals.nelts; i++)
+    {
+      sal = sals.sals[i];
+
+      if (from_tty)
+	describe_other_breakpoints (sal.pc, sal.section);
+
+      b = set_raw_breakpoint (sal);
+      set_breakpoint_count (breakpoint_count + 1);
+      b->number = breakpoint_count;
+      b->type = hardwareflag ? bp_hardware_breakpoint : bp_breakpoint;
+      b->cond = cond;
+      b->thread = thread;
+
+      /* If a canonical line spec is needed use that instead of the
+	 command string.  */
+      if (canonical != (char **)NULL && canonical[i] != NULL)
+	b->addr_string = canonical[i];
+      else if (addr_start)
+	b->addr_string = savestring (addr_start, addr_end - addr_start);
+      if (cond_start)
+	b->cond_string = savestring (cond_start, cond_end - cond_start);
+				     
+      b->enable = enabled;
+      b->disposition = tempflag ? del : donttouch;
+      mention (b);
+    }
+
+  if (sals.nelts > 1)
+    {
+      printf_filtered ("Multiple breakpoints were set.\n");
+      printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+    }
+  do_cleanups (old_chain);
+}
+
+static void
+break_at_finish_at_depth_command_1 (arg, flag, from_tty)
+     char *arg;
+     int flag;
+     int from_tty;
+{
+  struct frame_info *frame;
+  CORE_ADDR low, high, selected_pc = 0;
+  char *extra_args, *level_arg, *addr_string;
+  int extra_args_len = 0, if_arg = 0;
+
+  if (!arg ||
+      (arg[0] == 'i' && arg[1] == 'f' && (arg[2] == ' ' || arg[2] == '\t')))
+    {
+
+      if (default_breakpoint_valid)
+	{
+	  if (selected_frame)
+	    {
+	      selected_pc = selected_frame->pc;
+	      if (arg)
+		if_arg = 1;
+	    }
+	  else
+	    error ("No selected frame.");
+	}
+      else
+	error ("No default breakpoint address now.");
+    }
+  else
+    {
+      extra_args = strchr (arg, ' ');
+      if (extra_args)
+	{
+	  extra_args++;
+	  extra_args_len = strlen (extra_args);
+	  level_arg = (char *) xmalloc (extra_args - arg);
+	  strncpy (level_arg, arg, extra_args - arg - 1);
+	  level_arg[extra_args - arg - 1] = '\0';
+	}
+      else
+	{
+	  level_arg = (char *) xmalloc (strlen (arg) + 1);
+	  strcpy (level_arg, arg);
+	}
+
+      frame = parse_frame_specification (level_arg);
+      if (frame)
+	selected_pc = frame->pc;
+      else
+	selected_pc = 0;
+    }
+  if (if_arg)
+    {
+      extra_args = arg;
+      extra_args_len = strlen (arg); 
+    }
+
+  if (selected_pc)
+    {
+      if (find_pc_partial_function(selected_pc, (char **)NULL, &low, &high))
+	{
+	  addr_string = (char *) xmalloc (26 + extra_args_len);
+	  if (extra_args_len)
+	    sprintf (addr_string, "*0x%x %s", high, extra_args);
+	  else
+	    sprintf (addr_string, "*0x%x", high);
+	  break_command_1 (addr_string, flag, from_tty);
+	  free (addr_string);
+	}
+      else
+	error ("No function contains the specified address");
+    }
+  else
+    error ("Unable to set breakpoint at procedure exit");
+}
+
+
+static void
+break_at_finish_command_1 (arg, flag, from_tty)
+     char *arg;
+     int flag;
+     int from_tty;
+{
+  char *addr_string, *break_string, *beg_addr_string;
+  CORE_ADDR low, high;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  struct cleanup *old_chain;
+  char *extra_args;
+  int extra_args_len = 0;
+  int i, if_arg = 0;
+
+  if (!arg ||
+      (arg[0] == 'i' && arg[1] == 'f' && (arg[2] == ' ' || arg[2] == '\t')))
+    {
+      if (default_breakpoint_valid)
+	{
+	  if (selected_frame)
+	    {
+	      addr_string = (char *) xmalloc (15);
+	      sprintf (addr_string, "*0x%x", selected_frame->pc);
+	      if (arg)
+		if_arg = 1;
+	    }
+	  else
+	    error ("No selected frame.");
+	}
+      else
+	error ("No default breakpoint address now.");
+    }
+  else
+    {
+      addr_string = (char *) xmalloc (strlen (arg) + 1);
+      strcpy (addr_string, arg);
+    }
+
+  if (if_arg)
+    {
+      extra_args = arg;
+      extra_args_len = strlen (arg); 
+    }
+  else
+    if (arg)
+      {
+	/* get the stuff after the function name or address */
+	extra_args = strchr (arg, ' ');
+        if (extra_args)
+	  {
+	    extra_args++;
+	    extra_args_len = strlen (extra_args);
+          }
+      }
+
+  sals.sals = NULL;
+  sals.nelts = 0;
+
+  beg_addr_string = addr_string;  
+  sals = decode_line_1 (&addr_string, 1, (struct symtab *)NULL, 0, 
+			(char ***)NULL);
+
+  free (beg_addr_string);
+  old_chain = make_cleanup (free, sals.sals);
+  for (i = 0; (i < sals.nelts); i++)
+    {
+      sal = sals.sals[i];
+      if (find_pc_partial_function (sal.pc, (char **)NULL, &low, &high))
+	{
+	  break_string = (char *) xmalloc (extra_args_len + 26);
+	  if (extra_args_len)
+	    sprintf (break_string, "*0x%x %s", high, extra_args);
+	  else
+	    sprintf (break_string, "*0x%x", high);
+	  break_command_1 (break_string, flag, from_tty);
+	  free(break_string);
+	}
+      else
+	error ("No function contains the specified address");
+    }
+  if (sals.nelts > 1)
+    {
+      printf_filtered ("Multiple breakpoints were set.\n");
+      printf_filtered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+    }
+  do_cleanups(old_chain);
+}
+
+
+/* Helper function for break_command_1 and disassemble_command.  */
+
+void
+resolve_sal_pc (sal)
+     struct symtab_and_line *sal;
+{
+  CORE_ADDR pc;
+
+  if (sal->pc == 0 && sal->symtab != NULL)
+    {
+      if (!find_line_pc (sal->symtab, sal->line, &pc))
+	error ("No line %d in file \"%s\".",
+	       sal->line, sal->symtab->filename);
+      sal->pc = pc;
+    }
+
+  if (sal->section == 0 && sal->symtab != NULL)
+    {
+      struct blockvector *bv;
+      struct block       *b;
+      struct symbol      *sym;
+      int                 index;
+
+      bv  = blockvector_for_pc_sect (sal->pc, 0, &index, sal->symtab);
+      if (bv != NULL)
+	{
+	  b   = BLOCKVECTOR_BLOCK (bv, index);
+	  sym = block_function (b);
+	  if (sym != NULL)
+	    {
+	      fixup_symbol_section (sym, sal->symtab->objfile);
+	      sal->section = SYMBOL_BFD_SECTION (sym);
+	    }
+	  else
+	    {
+	      /* It really is worthwhile to have the section, so we'll just
+		 have to look harder. This case can be executed if we have 
+		 line numbers but no functions (as can happen in assembly 
+		 source).  */
+
+	      struct minimal_symbol *msym; 
+
+	      msym = lookup_minimal_symbol_by_pc (sal->pc);
+	      if (msym)
+		sal->section = SYMBOL_BFD_SECTION (msym);
+	    }
+	}
+    }
+}
+
+void
+break_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_command_1 (arg, 0, from_tty);
+}
+
+void
+break_at_finish_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_at_finish_command_1 (arg, 0, from_tty);
+}
+
+void
+break_at_finish_at_depth_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_at_finish_at_depth_command_1 (arg, 0, from_tty);
+}
+
+void
+tbreak_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_command_1 (arg, BP_TEMPFLAG, from_tty);
+}
+
+void
+tbreak_at_finish_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_at_finish_command_1 (arg, BP_TEMPFLAG, from_tty);
+}
+
+static void
+hbreak_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_command_1 (arg, BP_HARDWAREFLAG, from_tty);
+}
+
+static void
+thbreak_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  break_command_1 (arg, (BP_TEMPFLAG | BP_HARDWAREFLAG), from_tty);
+}
+
+static void
+stop_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_filtered ("Specify the type of breakpoint to set.\n\
+Usage: stop in <function | address>\n\
+       stop at <line>\n");
+}
+
+static void
+stopin_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int badInput = 0;
+
+  if (arg == (char *)NULL)
+    badInput = 1;
+  else if (*arg != '*')
+    {
+      char *argptr = arg;
+      int hasColon = 0;
+
+      /* look for a ':'.  If this is a line number specification, then say
+	 it is bad, otherwise, it should be an address or function/method
+	 name */
+      while (*argptr && !hasColon)
+        {
+          hasColon = (*argptr == ':');
+          argptr++;
+        }
+
+      if (hasColon)
+        badInput = (*argptr != ':'); /* Not a class::method */
+      else
+        badInput = isdigit(*arg); /* a simple line number */
+    }
+
+  if (badInput)
+    printf_filtered("Usage: stop in <function | address>\n");
+  else
+    break_command_1 (arg, 0, from_tty);
+}
+
+static void
+stopat_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int badInput = 0;
+
+  if (arg == (char *)NULL || *arg == '*') /* no line number */
+    badInput = 1;
+  else
+    {
+      char *argptr = arg;
+      int hasColon = 0;
+
+      /* look for a ':'.  If there is a '::' then get out, otherwise
+	 it is probably a line number. */
+      while (*argptr && !hasColon)
+        {
+          hasColon = (*argptr == ':');
+          argptr++;
+        }
+
+      if (hasColon)
+        badInput = (*argptr == ':'); /* we have class::method */
+      else
+        badInput = !isdigit(*arg); /* not a line number */
+    }
+
+  if (badInput)
+    printf_filtered("Usage: stop at <line>\n");
+  else
+    break_command_1 (arg, 0, from_tty);
+}
+
+/* ARGSUSED */
+/* accessflag:  0: watch write, 1: watch read, 2: watch access(read or write) */
+static void
+watch_command_1 (arg, accessflag, from_tty)
+     char *arg;
+     int accessflag;
+     int from_tty;
+{
+  struct breakpoint *b;
+  struct symtab_and_line sal;
+  struct expression *exp;
+  struct block *exp_valid_block;
+  struct value *val, *mark;
+  struct frame_info *frame;
+  struct frame_info *prev_frame = NULL;
+  char *exp_start = NULL;
+  char *exp_end = NULL;
+  char *tok, *end_tok;
+  int toklen;
+  char *cond_start = NULL;
+  char *cond_end = NULL;
+  struct expression *cond = NULL;
+  int i, other_type_used, target_resources_ok = 0;
+  enum bptype bp_type;
+  int mem_cnt = 0;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+  
+  /* Parse arguments.  */
+  innermost_block = NULL;
+  exp_start = arg;
+  exp = parse_exp_1 (&arg, 0, 0);
+  exp_end = arg;
+  exp_valid_block = innermost_block;
+  mark = value_mark ();
+  val = evaluate_expression (exp);
+  release_value (val);
+  if (VALUE_LAZY (val))
+    value_fetch_lazy (val);
+
+  tok = arg;
+  while (*tok == ' ' || *tok == '\t')
+    tok++;
+  end_tok = tok;
+
+  while (*end_tok != ' ' && *end_tok != '\t' && *end_tok != '\000')
+    end_tok++;
+
+  toklen = end_tok - tok;
+  if (toklen >= 1 && strncmp (tok, "if", toklen) == 0)
+    {
+      tok = cond_start = end_tok + 1;
+      cond = parse_exp_1 (&tok, 0, 0);
+      cond_end = tok;
+    }
+  if (*tok)
+    error("Junk at end of command.");
+
+  if (accessflag == 1) bp_type = bp_read_watchpoint;
+  else if (accessflag == 2) bp_type = bp_access_watchpoint;
+  else bp_type = bp_hardware_watchpoint;
+
+  mem_cnt = can_use_hardware_watchpoint (val);
+  if (mem_cnt == 0 && bp_type != bp_hardware_watchpoint)
+    error ("Expression cannot be implemented with read/access watchpoint.");
+  if (mem_cnt != 0) { 
+    i = hw_watchpoint_used_count (bp_type, &other_type_used);
+    target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+		bp_type, i + mem_cnt, other_type_used);
+    if (target_resources_ok == 0 && bp_type != bp_hardware_watchpoint)
+      error ("Target does not have this type of hardware watchpoint support.");
+    if (target_resources_ok < 0 && bp_type != bp_hardware_watchpoint)
+      error ("Target resources have been allocated for other types of watchpoints.");
+  }
+
+#if defined(HPUXHPPA)
+ /*  On HP-UX if you set a h/w
+     watchpoint before the "run" command, the inferior dies with a e.g.,
+     SIGILL once you start it.  I initially believed this was due to a
+     bad interaction between page protection traps and the initial
+     startup sequence by the dynamic linker.
+
+     However, I tried avoiding that by having HP-UX's implementation of
+     TARGET_CAN_USE_HW_WATCHPOINT return FALSE if there was no inferior_pid
+     yet, which forced slow watches before a "run" or "attach", and it
+     still fails somewhere in the startup code.
+
+     Until I figure out what's happening, I'm disallowing watches altogether
+     before the "run" or "attach" command.  We'll tell the user they must
+     set watches after getting the program started. */
+  if (! target_has_execution)
+    {
+      warning ("can't do that without a running program; try \"break main\", \"run\" first");
+      return;
+    }
+#endif /* HPUXHPPA */
+  
+  /* Now set up the breakpoint.  */
+  b = set_raw_breakpoint (sal);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->disposition = donttouch;
+  b->exp = exp;
+  b->exp_valid_block = exp_valid_block;
+  b->exp_string = savestring (exp_start, exp_end - exp_start);
+  b->val = val;
+  b->cond = cond;
+  if (cond_start)
+    b->cond_string = savestring (cond_start, cond_end - cond_start);
+  else
+    b->cond_string = 0;
+         
+  frame = block_innermost_frame (exp_valid_block);
+  if (frame)
+    {
+      prev_frame = get_prev_frame (frame);
+      b->watchpoint_frame = frame->frame;
+    }
+  else
+    b->watchpoint_frame = (CORE_ADDR)0;
+
+  if (mem_cnt && target_resources_ok > 0)
+    b->type = bp_type;
+  else
+    b->type = bp_watchpoint;
+
+  /* If the expression is "local", then set up a "watchpoint scope"
+     breakpoint at the point where we've left the scope of the watchpoint
+     expression.  */
+  if (innermost_block)
+    {
+      if (prev_frame)
+	{
+	  struct breakpoint *scope_breakpoint;
+	  struct symtab_and_line scope_sal;
+
+	  INIT_SAL (&scope_sal);	/* initialize to zeroes */
+	  scope_sal.pc      = get_frame_pc (prev_frame);
+	  scope_sal.section = find_pc_overlay (scope_sal.pc);
+
+	  scope_breakpoint = set_raw_breakpoint (scope_sal);
+	  set_breakpoint_count (breakpoint_count + 1);
+	  scope_breakpoint->number = breakpoint_count;
+
+	  scope_breakpoint->type = bp_watchpoint_scope;
+	  scope_breakpoint->enable = enabled;
+
+	  /* Automatically delete the breakpoint when it hits.  */
+	  scope_breakpoint->disposition = del;
+
+	  /* Only break in the proper frame (help with recursion).  */
+	  scope_breakpoint->frame = prev_frame->frame;
+
+	  /* Set the address at which we will stop.  */
+	  scope_breakpoint->address = get_frame_pc (prev_frame);
+
+	  /* The scope breakpoint is related to the watchpoint.  We
+	     will need to act on them together.  */
+	  b->related_breakpoint = scope_breakpoint;
+	}
+    }
+  value_free_to_mark (mark);
+  mention (b);
+}
+
+/* Return count of locations need to be watched and can be handled
+   in hardware.  If the watchpoint can not be handled
+   in hardware return zero.  */
+
+#if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
+#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_size) \
+    ((byte_size) <= (REGISTER_SIZE))
+#endif
+
+static int
+can_use_hardware_watchpoint (v)
+     struct value *v;
+{
+  int found_memory_cnt = 0;
+
+  /* Did the user specifically forbid us to use hardware watchpoints? */
+  if (! can_use_hw_watchpoints)
+    return 0;
+	
+  /* Make sure all the intermediate values are in memory.  Also make sure
+     we found at least one memory expression.  Guards against watch 0x12345,
+     which is meaningless, but could cause errors if one tries to insert a 
+     hardware watchpoint for the constant expression.  */
+  for ( ; v; v = v->next)
+    {
+      if (v->lval == lval_memory)
+	{
+	  if (TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT (TYPE_LENGTH (VALUE_TYPE (v))))
+	    found_memory_cnt++;
+        }
+      else if (v->lval != not_lval && v->modifiable == 0)
+	return 0;
+    }
+
+  /* The expression itself looks suitable for using a hardware
+     watchpoint, but give the target machine a chance to reject it.  */
+  return found_memory_cnt;
+}
+
+static void watch_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  watch_command_1 (arg, 0, from_tty);
+}
+
+static void rwatch_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  watch_command_1 (arg, 1, from_tty);
+}
+
+static void awatch_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  watch_command_1 (arg, 2, from_tty);
+}
+
+
+/* Helper routine for the until_command routine in infcmd.c.  Here
+   because it uses the mechanisms of breakpoints.  */
+
+/* ARGSUSED */
+void
+until_break_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  struct frame_info *prev_frame = get_prev_frame (selected_frame);
+  struct breakpoint *breakpoint;
+  struct cleanup *old_chain;
+
+  clear_proceed_status ();
+
+  /* Set a breakpoint where the user wants it and at return from
+     this function */
+  
+  if (default_breakpoint_valid)
+    sals = decode_line_1 (&arg, 1, default_breakpoint_symtab,
+			  default_breakpoint_line, (char ***)NULL);
+  else
+    sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, (char ***)NULL);
+  
+  if (sals.nelts != 1)
+    error ("Couldn't get information on specified line.");
+  
+  sal = sals.sals[0];
+  free ((PTR)sals.sals);		/* malloc'd, so freed */
+  
+  if (*arg)
+    error ("Junk at end of arguments.");
+  
+  resolve_sal_pc (&sal);
+  
+  breakpoint = set_momentary_breakpoint (sal, selected_frame, bp_until);
+  
+  old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+
+  /* Keep within the current frame */
+  
+  if (prev_frame)
+    {
+      sal = find_pc_line (prev_frame->pc, 0);
+      sal.pc = prev_frame->pc;
+      breakpoint = set_momentary_breakpoint (sal, prev_frame, bp_until);
+      make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+    }
+  
+  proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+  do_cleanups(old_chain);
+}
+
+#if 0
+/* These aren't used; I don't konw what they were for.  */
+/* Set a breakpoint at the catch clause for NAME.  */
+static int
+catch_breakpoint (name)
+     char *name;
+{
+}
+
+static int
+disable_catch_breakpoint ()
+{
+}
+
+static int
+delete_catch_breakpoint ()
+{
+}
+
+static int
+enable_catch_breakpoint ()
+{
+}
+#endif /* 0 */
+
+struct sal_chain
+{
+  struct sal_chain *next;
+  struct symtab_and_line sal;
+};
+
+/* Not really used -- invocation in handle_gnu_4_16_catch_command
+   had been commented out in the v.4.16 sources, and stays
+   disabled there now because "catch NAME" syntax isn't allowed.
+   pai/1997-07-11 */
+/* This isn't used; I don't know what it was for.  */
+/* For each catch clause identified in ARGS, run FUNCTION
+   with that clause as an argument.  */
+static struct symtabs_and_lines
+map_catch_names (args, function)
+     char *args;
+     int (*function)();
+{
+  register char *p = args;
+  register char *p1;
+  struct symtabs_and_lines sals;
+#if 0
+  struct sal_chain *sal_chain = 0;
+#endif
+
+  if (p == 0)
+    error_no_arg ("one or more catch names");
+
+  sals.nelts = 0;
+  sals.sals = NULL;
+
+  while (*p)
+    {
+      p1 = p;
+      /* Don't swallow conditional part.  */
+      if (p1[0] == 'i' && p1[1] == 'f'
+	  && (p1[2] == ' ' || p1[2] == '\t'))
+	break;
+
+      if (isalpha (*p1))
+	{
+	  p1++;
+	  while (isalnum (*p1) || *p1 == '_' || *p1 == '$')
+	    p1++;
+	}
+
+      if (*p1 && *p1 != ' ' && *p1 != '\t')
+	error ("Arguments must be catch names.");
+
+      *p1 = 0;
+#if 0
+      if (function (p))
+	{
+	  struct sal_chain *next = (struct sal_chain *)
+	    alloca (sizeof (struct sal_chain));
+	  next->next = sal_chain;
+	  next->sal = get_catch_sal (p);
+	  sal_chain = next;
+	  goto win;
+	}
+#endif
+      printf_unfiltered ("No catch clause for exception %s.\n", p);
+#if 0
+    win:
+#endif
+      p = p1;
+      while (*p == ' ' || *p == '\t') p++;
+    }
+}
+
+/* This shares a lot of code with `print_frame_label_vars' from stack.c.  */
+
+static struct symtabs_and_lines
+get_catch_sals (this_level_only)
+     int this_level_only;
+{
+  register struct blockvector *bl;
+  register struct block *block;
+  int index, have_default = 0;
+  CORE_ADDR pc;
+  struct symtabs_and_lines sals;
+  struct sal_chain *sal_chain = 0;
+  char *blocks_searched;
+
+  /* Not sure whether an error message is always the correct response,
+     but it's better than a core dump.  */
+  if (selected_frame == NULL)
+    error ("No selected frame.");
+  block = get_frame_block (selected_frame);
+  pc = selected_frame->pc;
+
+  sals.nelts = 0;
+  sals.sals = NULL;
+
+  if (block == 0)
+    error ("No symbol table info available.\n");
+
+  bl = blockvector_for_pc (BLOCK_END (block) - 4, &index);
+  blocks_searched = (char *) alloca (BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+  memset (blocks_searched, 0, BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+
+  while (block != 0)
+    {
+      CORE_ADDR end = BLOCK_END (block) - 4;
+      int last_index;
+
+      if (bl != blockvector_for_pc (end, &index))
+	error ("blockvector blotch");
+      if (BLOCKVECTOR_BLOCK (bl, index) != block)
+	error ("blockvector botch");
+      last_index = BLOCKVECTOR_NBLOCKS (bl);
+      index += 1;
+
+      /* Don't print out blocks that have gone by.  */
+      while (index < last_index
+	     && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < pc)
+	index++;
+
+      while (index < last_index
+	     && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < end)
+	{
+	  if (blocks_searched[index] == 0)
+	    {
+	      struct block *b = BLOCKVECTOR_BLOCK (bl, index);
+	      int nsyms;
+	      register int i;
+	      register struct symbol *sym;
+
+	      nsyms = BLOCK_NSYMS (b);
+
+	      for (i = 0; i < nsyms; i++)
+		{
+		  sym = BLOCK_SYM (b, i);
+		  if (STREQ (SYMBOL_NAME (sym), "default"))
+		    {
+		      if (have_default)
+			continue;
+		      have_default = 1;
+		    }
+		  if (SYMBOL_CLASS (sym) == LOC_LABEL)
+		    {
+		      struct sal_chain *next = (struct sal_chain *)
+			alloca (sizeof (struct sal_chain));
+		      next->next = sal_chain;
+		      next->sal = find_pc_line (SYMBOL_VALUE_ADDRESS (sym), 0);
+		      sal_chain = next;
+		    }
+		}
+	      blocks_searched[index] = 1;
+	    }
+	  index++;
+	}
+      if (have_default)
+	break;
+      if (sal_chain && this_level_only)
+	break;
+
+      /* After handling the function's top-level block, stop.
+	 Don't continue to its superblock, the block of
+	 per-file symbols.  */
+      if (BLOCK_FUNCTION (block))
+	break;
+      block = BLOCK_SUPERBLOCK (block);
+    }
+
+  if (sal_chain)
+    {
+      struct sal_chain *tmp_chain;
+
+      /* Count the number of entries.  */
+      for (index = 0, tmp_chain = sal_chain; tmp_chain;
+	   tmp_chain = tmp_chain->next)
+	index++;
+
+      sals.nelts = index;
+      sals.sals = (struct symtab_and_line *)
+	xmalloc (index * sizeof (struct symtab_and_line));
+      for (index = 0; sal_chain; sal_chain = sal_chain->next, index++)
+	sals.sals[index] = sal_chain->sal;
+    }
+
+  return sals;
+}
+
+static void
+ep_skip_leading_whitespace (s)
+    char **  s;
+{
+   if ((s == NULL) || (*s == NULL))
+       return;
+   while (isspace(**s))
+       *s += 1;
+}
+ 
+/* This function examines a string, and attempts to find a token
+   that might be an event name in the leading characters.  If a
+   possible match is found, a pointer to the last character of
+   the token is returned.  Else, NULL is returned. */
+static char *
+ep_find_event_name_end (arg)
+  char *  arg;
+{
+  char *  s = arg;
+  char *  event_name_end = NULL;
+ 
+  /* If we could depend upon the presense of strrpbrk, we'd use that... */
+  if (arg == NULL)
+    return NULL;
+ 
+  /* We break out of the loop when we find a token delimiter.
+   Basically, we're looking for alphanumerics and underscores;
+   anything else delimites the token. */
+  while (*s != '\0')
+    {
+      if (! isalnum(*s) && (*s != '_'))
+        break;
+      event_name_end = s;
+      s++;
+    }
+ 
+  return event_name_end;
+}
+
+ 
+/* This function attempts to parse an optional "if <cond>" clause
+   from the arg string.  If one is not found, it returns NULL.
+ 
+   Else, it returns a pointer to the condition string.  (It does not
+   attempt to evaluate the string against a particular block.)  And,
+   it updates arg to point to the first character following the parsed
+   if clause in the arg string. */
+static char *
+ep_parse_optional_if_clause (arg)
+  char **  arg;
+{
+  char *  cond_string;
+ 
+  if (((*arg)[0] != 'i') || ((*arg)[1] != 'f') || !isspace((*arg)[2]))
+    return NULL;
+ 
+  /* Skip the "if" keyword. */
+  (*arg) += 2;
+ 
+  /* Skip any extra leading whitespace, and record the start of the
+     condition string. */
+  ep_skip_leading_whitespace (arg);
+  cond_string = *arg;
+ 
+  /* Assume that the condition occupies the remainder of the arg string. */
+  (*arg) += strlen (cond_string);
+ 
+  return cond_string;
+}
+ 
+/* This function attempts to parse an optional filename from the arg
+   string.  If one is not found, it returns NULL.
+ 
+   Else, it returns a pointer to the parsed filename.  (This function
+   makes no attempt to verify that a file of that name exists, or is
+   accessible.)  And, it updates arg to point to the first character
+   following the parsed filename in the arg string.
+ 
+   Note that clients needing to preserve the returned filename for
+   future access should copy it to their own buffers. */
+static char *
+ep_parse_optional_filename (arg)
+  char **  arg;
+{
+  static char  filename [1024];
+  char *  arg_p = *arg;
+  int  i;
+  char  c;
+ 
+  if ((*arg_p == '\0') || isspace (*arg_p))
+    return NULL;
+ 
+  for (i=0; ; i++)
+    {
+      c = *arg_p;
+      if (isspace (c))
+        c = '\0';
+      filename[i] = c;
+      if (c == '\0')
+        break;
+      arg_p++;
+    }
+  *arg = arg_p;
+ 
+  return filename;
+}
+ 
+/* Commands to deal with catching events, such as signals, exceptions,
+   process start/exit, etc.  */
+ 
+typedef enum {catch_fork, catch_vfork} catch_fork_kind;
+ 
+static void
+catch_fork_command_1 (fork_kind, arg, tempflag, from_tty)
+  catch_fork_kind  fork_kind;
+  char *  arg;
+  int  tempflag;
+  int  from_tty;
+{
+  char *  cond_string = NULL;
+ 
+  ep_skip_leading_whitespace (&arg);
+ 
+  /* The allowed syntax is:
+        catch [v]fork
+        catch [v]fork if <cond>
+ 
+     First, check if there's an if clause. */
+  cond_string = ep_parse_optional_if_clause (&arg);
+ 
+  if ((*arg != '\0') && !isspace (*arg))
+    error ("Junk at end of arguments.");
+ 
+  /* If this target supports it, create a fork or vfork catchpoint
+     and enable reporting of such events. */
+  switch (fork_kind) {
+    case catch_fork :
+      create_fork_event_catchpoint (tempflag, cond_string);
+      break;
+    case catch_vfork :
+      create_vfork_event_catchpoint (tempflag, cond_string);
+      break;
+    default :
+      error ("unsupported or unknown fork kind; cannot catch it");
+      break;
+  }
+}
+
+static void
+catch_exec_command_1 (arg, tempflag, from_tty)
+  char *  arg;
+  int  tempflag;
+  int  from_tty;
+{
+  char *  cond_string = NULL;
+
+  ep_skip_leading_whitespace (&arg);
+
+  /* The allowed syntax is:
+        catch exec
+        catch exec if <cond>
+
+     First, check if there's an if clause. */
+  cond_string = ep_parse_optional_if_clause (&arg);
+
+  if ((*arg != '\0') && !isspace (*arg))
+    error ("Junk at end of arguments.");
+
+  /* If this target supports it, create an exec catchpoint
+     and enable reporting of such events. */
+  create_exec_event_catchpoint (tempflag, cond_string);
+}
+ 
+#if defined(SOLIB_ADD)
+static void
+catch_load_command_1 (arg, tempflag, from_tty)
+  char *  arg;
+  int  tempflag;
+  int  from_tty;
+{
+  char *  dll_pathname = NULL;
+  char *  cond_string = NULL;
+ 
+  ep_skip_leading_whitespace (&arg);
+ 
+  /* The allowed syntax is:
+        catch load
+        catch load if <cond>
+        catch load <filename>
+        catch load <filename> if <cond>
+ 
+     The user is not allowed to specify the <filename> after an
+     if clause.
+ 
+     We'll ignore the pathological case of a file named "if".
+ 
+     First, check if there's an if clause.  If so, then there
+     cannot be a filename. */
+  cond_string = ep_parse_optional_if_clause (&arg);
+ 
+  /* If there was an if clause, then there cannot be a filename.
+     Else, there might be a filename and an if clause. */
+  if (cond_string == NULL)
+    {
+      dll_pathname = ep_parse_optional_filename (&arg);
+      ep_skip_leading_whitespace (&arg);
+      cond_string = ep_parse_optional_if_clause (&arg);
+    }
+ 
+  if ((*arg != '\0') && !isspace (*arg))
+    error ("Junk at end of arguments.");
+ 
+  /* Create a load breakpoint that only triggers when a load of
+     the specified dll (or any dll, if no pathname was specified)
+     occurs. */
+  SOLIB_CREATE_CATCH_LOAD_HOOK (inferior_pid, tempflag, dll_pathname, cond_string);
+}
+ 
+static void
+catch_unload_command_1 (arg, tempflag, from_tty)
+  char *  arg;
+  int  tempflag;
+  int  from_tty;
+{
+  char *  dll_pathname = NULL;
+  char *  cond_string = NULL;
+ 
+  ep_skip_leading_whitespace (&arg);
+ 
+  /* The allowed syntax is:
+        catch unload
+        catch unload if <cond>
+        catch unload <filename>
+        catch unload <filename> if <cond>
+ 
+     The user is not allowed to specify the <filename> after an
+     if clause.
+ 
+     We'll ignore the pathological case of a file named "if".
+ 
+     First, check if there's an if clause.  If so, then there
+     cannot be a filename. */
+  cond_string = ep_parse_optional_if_clause (&arg);
+ 
+  /* If there was an if clause, then there cannot be a filename.
+     Else, there might be a filename and an if clause. */
+  if (cond_string == NULL)
+    {
+      dll_pathname = ep_parse_optional_filename (&arg);
+      ep_skip_leading_whitespace (&arg);
+      cond_string = ep_parse_optional_if_clause (&arg);
+    }
+ 
+  if ((*arg != '\0') && !isspace (*arg))
+    error ("Junk at end of arguments.");
+ 
+  /* Create an unload breakpoint that only triggers when an unload of
+     the specified dll (or any dll, if no pathname was specified)
+     occurs. */
+  SOLIB_CREATE_CATCH_UNLOAD_HOOK (inferior_pid, tempflag, dll_pathname, cond_string);
+}
+#endif /* SOLIB_ADD */
+
+/* Commands to deal with catching exceptions.  */
+
+/* Set a breakpoint at the specified callback routine for an
+   exception event callback */ 
+
+static void
+create_exception_catchpoint (tempflag, cond_string, ex_event, sal)
+  int tempflag;
+  char * cond_string;
+  enum exception_event_kind ex_event;
+  struct symtab_and_line * sal;
+{
+  struct breakpoint *  b;
+  int  i;
+  int  thread = -1;  /* All threads. */
+
+  if (!sal) /* no exception support? */
+    return;
+
+  b = set_raw_breakpoint (*sal);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->cond = NULL;
+  b->cond_string = (cond_string == NULL) ? NULL : savestring (cond_string, strlen (cond_string));
+  b->thread = thread;
+  b->addr_string = NULL;
+  b->enable = enabled;
+  b->disposition = tempflag ? del : donttouch;
+  switch (ex_event)
+    {
+      case EX_EVENT_THROW:
+        b->type = bp_catch_throw;
+        break;
+      case EX_EVENT_CATCH:
+        b->type = bp_catch_catch;
+        break;
+      default: /* error condition */ 
+        b->type = bp_none;
+        b->enable = disabled;
+        error ("Internal error -- invalid catchpoint kind");
+    }
+  mention (b);
+}
+
+/* Deal with "catch catch" and "catch throw" commands */ 
+
+static void
+catch_exception_command_1 (ex_event, arg, tempflag, from_tty)
+  enum exception_event_kind ex_event;
+  char *  arg;
+  int  tempflag;
+  int  from_tty;
+{
+  char * cond_string = NULL;
+  struct symtab_and_line * sal = NULL;
+  
+  ep_skip_leading_whitespace (&arg);
+  
+  cond_string = ep_parse_optional_if_clause (&arg);
+
+  if ((*arg != '\0') && !isspace (*arg))
+    error ("Junk at end of arguments.");
+
+  if ((ex_event != EX_EVENT_THROW) &&
+      (ex_event != EX_EVENT_CATCH))
+    error ("Unsupported or unknown exception event; cannot catch it");
+
+  /* See if we can find a callback routine */
+  sal = target_enable_exception_callback (ex_event, 1);
+
+  if (sal) 
+    {
+      /* We have callbacks from the runtime system for exceptions.
+         Set a breakpoint on the sal found, if no errors */ 
+      if (sal != (struct symtab_and_line *) -1)
+        create_exception_catchpoint (tempflag, cond_string, ex_event, sal);
+      else
+        return; /* something went wrong with setting up callbacks */ 
+    }
+  else  
+    {
+      /* No callbacks from runtime system for exceptions.
+         Try GNU C++ exception breakpoints using labels in debug info. */
+      if (ex_event == EX_EVENT_CATCH)
+        {
+          handle_gnu_4_16_catch_command (arg, tempflag, from_tty);
+        }
+      else if (ex_event == EX_EVENT_THROW)
+        {
+          /* Set a breakpoint on __raise_exception () */
+          
+          fprintf_filtered (gdb_stderr, "Unsupported with this platform/compiler combination.\n");
+          fprintf_filtered (gdb_stderr, "Perhaps you can achieve the effect you want by setting\n");
+          fprintf_filtered (gdb_stderr, "a breakpoint on __raise_exception().\n");
+        }
+    }
+}
+
+/* Cover routine to allow wrapping target_enable_exception_catchpoints
+   inside a catch_errors */
+
+static int
+cover_target_enable_exception_callback (arg)
+  PTR arg;
+{
+  args_for_catchpoint_enable *args = arg;
+  struct symtab_and_line *sal;
+  sal = target_enable_exception_callback (args->kind, args->enable);
+  if (sal == NULL)
+    return 0;
+  else if (sal == (struct symtab_and_line *) -1)
+    return -1;
+  else
+    return 1; /*is valid*/
+}
+
+
+
+/* This is the original v.4.16 and earlier version of the
+   catch_command_1() function.  Now that other flavours of "catch"
+   have been introduced, and since exception handling can be handled
+   in other ways (through target ops) also, this is used only for the
+   GNU C++ exception handling system.
+   Note: Only the "catch" flavour of GDB 4.16 is handled here.  The
+   "catch NAME" is now no longer allowed in catch_command_1().  Also,
+   there was no code in GDB 4.16 for "catch throw". 
+  
+   Called from catch_exception_command_1 () */
+
+
+static void
+handle_gnu_4_16_catch_command (arg, tempflag, from_tty)
+     char *arg;
+     int tempflag;
+     int from_tty;
+{
+  /* First, translate ARG into something we can deal with in terms
+     of breakpoints.  */
+
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  register struct expression *cond = 0;
+  register struct breakpoint *b;
+  char *save_arg;
+  int i;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+
+  /* If no arg given, or if first arg is 'if ', all active catch clauses
+     are breakpointed. */
+
+  if (!arg || (arg[0] == 'i' && arg[1] == 'f' 
+	       && (arg[2] == ' ' || arg[2] == '\t')))
+    {
+      /* Grab all active catch clauses.  */
+      sals = get_catch_sals (0);
+    }
+  else
+    {
+      /* Grab selected catch clauses.  */
+      error ("catch NAME not implemented");
+
+#if 0
+      /* Not sure why this code has been disabled. I'm leaving
+         it disabled.  We can never come here now anyway
+         since we don't allow the "catch NAME" syntax.
+         pai/1997-07-11 */ 
+
+      /* This isn't used; I don't know what it was for.  */
+      sals = map_catch_names (arg, catch_breakpoint);
+#endif
+    }
+
+  if (! sals.nelts) 
+    return;
+
+  save_arg = arg;
+  for (i = 0; i < sals.nelts; i++)
+    {
+      resolve_sal_pc (&sals.sals[i]);
+      
+      while (arg && *arg)
+	{
+	  if (arg[0] == 'i' && arg[1] == 'f'
+	      && (arg[2] == ' ' || arg[2] == '\t'))
+	    cond = parse_exp_1 ((arg += 2, &arg), 
+				block_for_pc (sals.sals[i].pc), 0);
+	  else
+	    error ("Junk at end of arguments.");
+	}
+      arg = save_arg;
+    }
+
+  for (i = 0; i < sals.nelts; i++)
+    {
+      sal = sals.sals[i];
+
+      if (from_tty)
+	describe_other_breakpoints (sal.pc, sal.section);
+
+      b = set_raw_breakpoint (sal);
+      set_breakpoint_count (breakpoint_count + 1);
+      b->number = breakpoint_count;
+      b->type = bp_breakpoint; /* Important -- this is an ordinary breakpoint.
+                                  For platforms with callback support for exceptions,
+                                  create_exception_catchpoint() will create special
+                                  bp types (bp_catch_catch and bp_catch_throw), and
+                                  there is code in insert_breakpoints() and elsewhere
+                                  that depends on that. */
+
+      b->cond = cond;
+      b->enable = enabled;
+      b->disposition = tempflag ? del : donttouch;
+
+      mention (b);
+    }
+
+  if (sals.nelts > 1)
+    {
+      printf_unfiltered ("Multiple breakpoints were set.\n");
+      printf_unfiltered ("Use the \"delete\" command to delete unwanted breakpoints.\n");
+    }
+  free ((PTR)sals.sals);
+}
+
+#if 0
+/* This creates a temporary internal breakpoint
+   just to placate infrun */
+static struct breakpoint *
+create_temp_exception_breakpoint (pc)
+  CORE_ADDR pc;
+{
+  struct symtab_and_line sal;
+  struct breakpoint *b;
+
+  INIT_SAL(&sal);
+  sal.pc = pc;
+  sal.symtab = NULL;
+  sal.line = 0;
+
+  b = set_raw_breakpoint (sal);
+  if (!b)
+    error ("Internal error -- couldn't set temp exception breakpoint");
+
+  b->type = bp_breakpoint;
+  b->disposition = del;
+  b->enable = enabled;
+  b->silent = 1;
+  b->number = internal_breakpoint_number--;
+  return b;
+}
+#endif
+
+static void
+catch_command_1 (arg, tempflag, from_tty)
+  char *arg;
+  int tempflag;
+  int from_tty;
+{
+ 
+  /* The first argument may be an event name, such as "start" or "load".
+     If so, then handle it as such.  If it doesn't match an event name,
+     then attempt to interpret it as an exception name.  (This latter is
+     the v4.16-and-earlier GDB meaning of the "catch" command.)
+ 
+     First, try to find the bounds of what might be an event name. */
+  char *  arg1_start = arg;
+  char *  arg1_end;
+  int  arg1_length;
+ 
+  if (arg1_start == NULL)
+    {
+      /* Old behaviour was to use pre-v-4.16 syntax */ 
+      /* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
+      /* return; */
+      /* Now, this is not allowed */ 
+      error ("Catch requires an event name.");
+
+    }
+  arg1_end = ep_find_event_name_end (arg1_start);
+  if (arg1_end == NULL)
+    error ("catch requires an event");
+  arg1_length = arg1_end + 1 - arg1_start;
+ 
+  /* Try to match what we found against known event names. */
+  if (strncmp (arg1_start, "signal", arg1_length) == 0)
+    {
+      error ("Catch of signal not yet implemented");
+    }
+  else if (strncmp (arg1_start, "catch", arg1_length) == 0)
+    {
+      catch_exception_command_1 (EX_EVENT_CATCH, arg1_end+1, tempflag, from_tty); 
+    }
+  else if (strncmp (arg1_start, "throw", arg1_length) == 0)
+    {
+      catch_exception_command_1 (EX_EVENT_THROW, arg1_end+1, tempflag, from_tty);
+    }
+  else if (strncmp (arg1_start, "thread_start", arg1_length) == 0)
+    {
+      error ("Catch of thread_start not yet implemented");
+    }
+  else if (strncmp (arg1_start, "thread_exit", arg1_length) == 0)
+    {
+      error ("Catch of thread_exit not yet implemented");
+    }
+  else if (strncmp (arg1_start, "thread_join", arg1_length) == 0)
+    {
+      error ("Catch of thread_join not yet implemented");
+    }
+  else if (strncmp (arg1_start, "start", arg1_length) == 0)
+    {
+      error ("Catch of start not yet implemented");
+    }
+  else if (strncmp (arg1_start, "exit", arg1_length) == 0)
+    {
+      error ("Catch of exit not yet implemented");
+    }
+  else if (strncmp (arg1_start, "fork", arg1_length) == 0)
+    {
+#if defined(CHILD_INSERT_FORK_CATCHPOINT)
+      catch_fork_command_1 (catch_fork, arg1_end+1, tempflag, from_tty);
+#else
+      error ("Catch of fork not yet implemented");
+#endif
+    }
+  else if (strncmp (arg1_start, "vfork", arg1_length) == 0)
+    {
+#if defined(CHILD_INSERT_VFORK_CATCHPOINT)
+      catch_fork_command_1 (catch_vfork, arg1_end+1, tempflag, from_tty);
+#else
+      error ("Catch of vfork not yet implemented");
+#endif
+    }
+  else if (strncmp (arg1_start, "exec", arg1_length) == 0)
+    {
+#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
+      catch_exec_command_1 (arg1_end+1, tempflag, from_tty);
+#else
+      error ("Catch of exec not yet implemented");
+#endif
+    }
+  else if (strncmp (arg1_start, "load", arg1_length) == 0)
+    {
+#if defined(SOLIB_ADD)
+      catch_load_command_1 (arg1_end+1, tempflag, from_tty);
+#else
+      error ("Catch of load not implemented");
+#endif
+    }
+  else if (strncmp (arg1_start, "unload", arg1_length) == 0)
+    {
+#if defined(SOLIB_ADD)
+      catch_unload_command_1 (arg1_end+1, tempflag, from_tty);
+#else
+      error ("Catch of load not implemented");
+#endif
+    }
+  else if (strncmp (arg1_start, "stop", arg1_length) == 0)
+    {
+      error ("Catch of stop not yet implemented");
+    }
+ 
+  /* This doesn't appear to be an event name */
+
+  else
+    {
+      /* Pre-v.4.16 behaviour was to treat the argument
+         as the name of an exception */ 
+      /* catch_throw_command_1 (arg1_start, tempflag, from_tty); */
+      /* Now this is not allowed */ 
+      error ("Unknown event kind specified for catch");
+
+    }
+}
+
+/* Used by the gui, could be made a worker for other things. */
+
+struct breakpoint *
+set_breakpoint_sal (sal)
+     struct symtab_and_line sal;
+{
+  struct breakpoint *b;
+  b = set_raw_breakpoint (sal);
+  set_breakpoint_count (breakpoint_count + 1);
+  b->number = breakpoint_count;
+  b->type = bp_breakpoint;
+  b->cond = 0;
+  b->thread = -1;
+  return b;
+}
+
+#if 0
+/* These aren't used; I don't know what they were for.  */
+/* Disable breakpoints on all catch clauses described in ARGS.  */
+static void
+disable_catch (args)
+     char *args;
+{
+  /* Map the disable command to catch clauses described in ARGS.  */
+}
+
+/* Enable breakpoints on all catch clauses described in ARGS.  */
+static void
+enable_catch (args)
+     char *args;
+{
+  /* Map the disable command to catch clauses described in ARGS.  */
+}
+
+/* Delete breakpoints on all catch clauses in the active scope.  */
+static void
+delete_catch (args)
+     char *args;
+{
+  /* Map the delete command to catch clauses described in ARGS.  */
+}
+#endif /* 0 */
+
+static void
+catch_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  catch_command_1 (arg, 0, from_tty);
+}
+
+
+static void
+tcatch_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  catch_command_1 (arg, 1, from_tty);
+}
+
+
+static void
+clear_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register struct breakpoint *b, *b1;
+  int default_match;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  register struct breakpoint *found;
+  int i;
+
+  if (arg)
+    {
+      sals = decode_line_spec (arg, 1);
+      default_match = 0;
+    }
+  else
+    {
+      sals.sals = (struct symtab_and_line *) 
+	xmalloc (sizeof (struct symtab_and_line));
+      INIT_SAL (&sal);	/* initialize to zeroes */
+      sal.line = default_breakpoint_line;
+      sal.symtab = default_breakpoint_symtab;
+      sal.pc = default_breakpoint_address;
+      if (sal.symtab == 0)
+	error ("No source file specified.");
+
+      sals.sals[0] = sal;
+      sals.nelts = 1;
+
+      default_match = 1;
+    }
+
+  /* For each line spec given, delete bps which correspond
+     to it.  We do this in two loops: the first loop looks at
+     the initial bp(s) in the chain which should be deleted,
+     the second goes down the rest of the chain looking ahead
+     one so it can take those bps off the chain without messing
+     up the chain. */
+
+
+  for (i = 0; i < sals.nelts; i++)
+    {
+      /* If exact pc given, clear bpts at that pc.
+	 If line given (pc == 0), clear all bpts on specified line.
+	 If defaulting, clear all bpts on default line
+         or at default pc.
+       
+		defaulting    sal.pc != 0    tests to do
+       
+                0              1             pc
+                1              1             pc _and_ line
+                0              0             line
+                1              0             <can't happen> */
+
+      sal = sals.sals[i];
+      found = (struct breakpoint *) 0;
+
+
+      while (breakpoint_chain
+             /* Why don't we check here that this is not
+		a watchpoint, etc., as we do below?
+		I can't make it fail, but don't know
+		what's stopping the failure: a watchpoint
+		of the same address as "sal.pc" should
+		wind up being deleted. */
+ 
+             && (  ((sal.pc && (breakpoint_chain->address == sal.pc)) &&
+                   (overlay_debugging == 0 ||
+                    breakpoint_chain->section == sal.section))
+                || ((default_match || (0 == sal.pc))
+                   && breakpoint_chain->source_file != NULL
+                   && sal.symtab != NULL
+                   && STREQ (breakpoint_chain->source_file, sal.symtab->filename)
+                   && breakpoint_chain->line_number == sal.line)))
+
+	{
+	  b1 = breakpoint_chain;
+	  breakpoint_chain = b1->next;
+	  b1->next = found;
+	  found = b1;
+	}
+
+      ALL_BREAKPOINTS (b)
+
+      while (b->next
+             && b->next->type != bp_none
+             && b->next->type != bp_watchpoint
+             && b->next->type != bp_hardware_watchpoint
+             && b->next->type != bp_read_watchpoint
+             && b->next->type != bp_access_watchpoint
+             && (  ((sal.pc && (b->next->address == sal.pc)) &&
+                   (overlay_debugging == 0 ||
+                    b->next->section == sal.section))
+                || ((default_match || (0 == sal.pc))
+                   && b->next->source_file != NULL
+                   && sal.symtab != NULL
+                   && STREQ (b->next->source_file, sal.symtab->filename)
+                   && b->next->line_number == sal.line)))
+
+
+	  {
+	    b1 = b->next;
+	    b->next = b1->next;
+	    b1->next = found;
+	    found = b1;
+	  }
+
+      if (found == 0)
+	{
+	  if (arg)
+	    error ("No breakpoint at %s.", arg);
+	  else
+	    error ("No breakpoint at this line.");
+	}
+
+      if (found->next) from_tty = 1; /* Always report if deleted more than one */
+      if (from_tty) printf_unfiltered ("Deleted breakpoint%s ", found->next ? "s" : "");
+      breakpoints_changed ();
+      while (found)
+	{
+	  if (from_tty) printf_unfiltered ("%d ", found->number);
+	  b1 = found->next;
+	  delete_breakpoint (found);
+	  found = b1;
+	}
+      if (from_tty) putchar_unfiltered ('\n');
+    }
+  free ((PTR)sals.sals);
+}
+
+/* Delete breakpoint in BS if they are `delete' breakpoints and
+   all breakpoints that are marked for deletion, whether hit or not.
+   This is called after any breakpoint is hit, or after errors.  */
+
+void
+breakpoint_auto_delete (bs)
+     bpstat bs;
+{
+  struct breakpoint *b, *temp;
+
+  for (; bs; bs = bs->next)
+    if (bs->breakpoint_at && bs->breakpoint_at->disposition == del 
+	&& bs->stop)
+      delete_breakpoint (bs->breakpoint_at);
+
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      if (b->disposition == del_at_next_stop)
+	delete_breakpoint (b);
+    }
+}
+
+/* Delete a breakpoint and clean up all traces of it in the data structures. */
+
+void
+delete_breakpoint (bpt)
+     struct breakpoint *bpt;
+{
+  register struct breakpoint *b;
+  register bpstat bs;
+
+  if (bpt == NULL)
+    error ("Internal error (attempted to delete a NULL breakpoint)");
+
+
+  /* Has this bp already been deleted?  This can happen because multiple
+     lists can hold pointers to bp's.  bpstat lists are especial culprits.
+
+     One example of this happening is a watchpoint's scope bp.  When the
+     scope bp triggers, we notice that the watchpoint is out of scope, and
+     delete it.  We also delete its scope bp.  But the scope bp is marked
+     "auto-deleting", and is already on a bpstat.  That bpstat is then
+     checked for auto-deleting bp's, which are deleted.
+
+     A real solution to this problem might involve reference counts in bp's,
+     and/or giving them pointers back to their referencing bpstat's, and
+     teaching delete_breakpoint to only free a bp's storage when no more
+     references were extent.  A cheaper bandaid was chosen. */
+  if (bpt->type == bp_none)
+    return;
+
+  if (delete_breakpoint_hook)
+    delete_breakpoint_hook (bpt);
+
+  if (bpt->inserted)
+    remove_breakpoint (bpt, mark_uninserted);
+      
+  if (breakpoint_chain == bpt)
+    breakpoint_chain = bpt->next;
+
+  /* If we have callback-style exception catchpoints, don't go through
+     the adjustments to the C++ runtime library etc. if the inferior
+     isn't actually running.  target_enable_exception_callback for a
+     null target ops vector gives an undesirable error message, so we
+     check here and avoid it. Since currently (1997-09-17) only HP-UX aCC's
+     exceptions are supported in this way, it's OK for now. FIXME */ 
+  if (ep_is_exception_catchpoint (bpt) && target_has_execution)
+    {
+      static char message1[] = "Error in deleting catchpoint %d:\n";
+      static char message[sizeof (message1) + 30];
+      args_for_catchpoint_enable args;
+
+      sprintf (message, message1, bpt->number);	/* Format possible error msg */
+      args.kind = bpt->type == bp_catch_catch ? EX_EVENT_CATCH : EX_EVENT_THROW;
+      args.enable = 0;
+      catch_errors (cover_target_enable_exception_callback, &args,
+		    message, RETURN_MASK_ALL);
+    }
+
+
+  ALL_BREAKPOINTS (b)
+    if (b->next == bpt)
+      {
+	b->next = bpt->next;
+	break;
+      }
+
+  /* Before turning off the visuals for the bp, check to see that
+     there are no other bps at the same address. */
+  if (tui_version)
+    {
+      int clearIt;
+
+      ALL_BREAKPOINTS (b)
+        {
+          clearIt = (b->address != bpt->address);
+          if (!clearIt)
+            break;
+        }
+
+      if (clearIt)
+        {
+          TUIDO(((TuiOpaqueFuncPtr)tui_vAllSetHasBreakAt, bpt, 0));
+          TUIDO(((TuiOpaqueFuncPtr)tuiUpdateAllExecInfos));
+        }
+    }
+
+  check_duplicates (bpt->address, bpt->section);
+  /* If this breakpoint was inserted, and there is another breakpoint
+     at the same address, we need to insert the other breakpoint.  */
+  if (bpt->inserted
+      && bpt->type != bp_hardware_watchpoint
+      && bpt->type != bp_read_watchpoint
+      && bpt->type != bp_access_watchpoint
+      && bpt->type != bp_catch_fork
+      && bpt->type != bp_catch_vfork
+      && bpt->type != bp_catch_exec)
+    {
+      ALL_BREAKPOINTS (b)
+	if (b->address == bpt->address
+	    && b->section == bpt->section
+	    && !b->duplicate
+	    && b->enable != disabled
+	    && b->enable != shlib_disabled
+	    && b->enable != call_disabled)
+	  {
+	    int val;
+	    val = target_insert_breakpoint (b->address, b->shadow_contents);
+	    if (val != 0)
+	      {
+		target_terminal_ours_for_output ();
+		fprintf_unfiltered (gdb_stderr, "Cannot insert breakpoint %d:\n", b->number);
+		memory_error (val, b->address);	/* which bombs us out */
+	      }
+	    else
+	      b->inserted = 1;
+	  }
+    }
+
+  free_command_lines (&bpt->commands);
+  if (bpt->cond)
+    free (bpt->cond);
+  if (bpt->cond_string != NULL)
+    free (bpt->cond_string);
+  if (bpt->addr_string != NULL)
+    free (bpt->addr_string);
+  if (bpt->exp != NULL)
+    free (bpt->exp);
+  if (bpt->exp_string != NULL)
+    free (bpt->exp_string);
+  if (bpt->val != NULL)
+    value_free (bpt->val);
+  if (bpt->source_file != NULL)
+    free (bpt->source_file);
+  if (bpt->dll_pathname != NULL)
+    free (bpt->dll_pathname);
+  if (bpt->triggered_dll_pathname != NULL)
+    free (bpt->triggered_dll_pathname);
+  if (bpt->exec_pathname != NULL)
+    free (bpt->exec_pathname);
+
+  /* Be sure no bpstat's are pointing at it after it's been freed.  */
+  /* FIXME, how can we find all bpstat's?
+     We just check stop_bpstat for now.  */
+  for (bs = stop_bpstat; bs; bs = bs->next)
+    if (bs->breakpoint_at == bpt)
+      {
+	bs->breakpoint_at = NULL;
+
+	/* we'd call bpstat_clear_actions, but that free's stuff and due
+	   to the multiple pointers pointing to one item with no
+	   reference counts found anywhere through out the bpstat's (how
+	   do you spell fragile?), we don't want to free things twice --
+	   better a memory leak than a corrupt malloc pool! */
+	bs->commands = NULL;
+	bs->old_val = NULL;
+      }
+  /* On the chance that someone will soon try again to delete this same
+     bp, we mark it as deleted before freeing its storage. */
+  bpt->type = bp_none;
+
+  free ((PTR)bpt);
+}
+
+void
+delete_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct breakpoint *b, *temp;
+
+  if (arg == 0)
+    {
+      int breaks_to_delete = 0;
+
+      /* Delete all breakpoints if no argument.
+	 Do not delete internal or call-dummy breakpoints, these
+	 have to be deleted with an explicit breakpoint number argument.  */
+      ALL_BREAKPOINTS (b) 
+	{
+	  if (b->type != bp_call_dummy && 
+              b->type != bp_shlib_event && 
+              b->number >= 0)
+	    breaks_to_delete = 1;
+	}
+
+      /* Ask user only if there are some breakpoints to delete.  */
+      if (!from_tty
+	  || (breaks_to_delete && query ("Delete all breakpoints? ")))
+	{
+	  ALL_BREAKPOINTS_SAFE (b, temp) 
+	    {
+	      if (b->type != bp_call_dummy &&
+                  b->type != bp_shlib_event &&
+                  b->number >= 0)
+		delete_breakpoint (b);
+	    }
+	}
+    }
+  else
+    map_breakpoint_numbers (arg, delete_breakpoint);
+}
+
+/* Reset a breakpoint given it's struct breakpoint * BINT.
+   The value we return ends up being the return value from catch_errors.
+   Unused in this case.  */
+
+static int
+breakpoint_re_set_one (bint)
+     PTR bint;
+{
+  struct breakpoint *b = (struct breakpoint *)bint;  /* get past catch_errs */
+  struct value *mark;
+  int i;
+  struct symtabs_and_lines sals;
+  char *s;
+  enum enable save_enable;
+
+  switch (b->type)
+    {
+    case bp_none:
+      warning ("attempted to reset apparently deleted breakpoint #%d?\n", b->number);
+      return 0;
+    case bp_breakpoint:
+    case bp_hardware_breakpoint:
+    case bp_catch_load:
+    case bp_catch_unload:
+      if (b->addr_string == NULL)
+	{
+	  /* Anything without a string can't be re-set. */
+	  delete_breakpoint (b);
+	  return 0;
+	}
+      /* In case we have a problem, disable this breakpoint.  We'll restore
+	 its status if we succeed.  */
+      save_enable = b->enable;
+      b->enable = disabled;
+
+      set_language (b->language);
+      input_radix = b->input_radix;
+      s = b->addr_string;
+      sals = decode_line_1 (&s, 1, (struct symtab *)NULL, 0, (char ***)NULL);
+      for (i = 0; i < sals.nelts; i++)
+	{
+	  resolve_sal_pc (&sals.sals[i]);
+
+	  /* Reparse conditions, they might contain references to the
+	     old symtab.  */
+	  if (b->cond_string != NULL)
+	    {
+	      s = b->cond_string;
+	      if (b->cond)
+		free ((PTR)b->cond);
+	      b->cond = parse_exp_1 (&s, block_for_pc (sals.sals[i].pc), 0);
+	    }
+
+	  /* We need to re-set the breakpoint if the address changes...*/
+	  if (b->address != sals.sals[i].pc
+	      /* ...or new and old breakpoints both have source files, and
+		 the source file name or the line number changes...  */
+	      || (b->source_file != NULL
+		  && sals.sals[i].symtab != NULL
+		  && (!STREQ (b->source_file, sals.sals[i].symtab->filename)
+		      || b->line_number != sals.sals[i].line)
+		  )
+	      /* ...or we switch between having a source file and not having
+		 one.  */
+	      || ((b->source_file == NULL) != (sals.sals[i].symtab == NULL))
+	      )
+	    {
+	      if (b->source_file != NULL)
+		free (b->source_file);
+	      if (sals.sals[i].symtab == NULL)
+		b->source_file = NULL;
+	      else
+		b->source_file =
+		  savestring (sals.sals[i].symtab->filename,
+			      strlen (sals.sals[i].symtab->filename));
+	      b->line_number = sals.sals[i].line;
+	      b->address = sals.sals[i].pc;
+
+             /* Used to check for duplicates here, but that can
+		cause trouble, as it doesn't check for disable
+                breakpoints. */
+
+	      mention (b);
+
+	      /* Might be better to do this just once per breakpoint_re_set,
+		 rather than once for every breakpoint.  */
+	      breakpoints_changed ();
+	    }
+	  b->section = sals.sals[i].section;
+	  b->enable = save_enable;	/* Restore it, this worked. */
+
+
+          /* Now that this is re-enabled, check_duplicates
+	     can be used. */
+          check_duplicates (b->address, b->section);
+
+	}
+      free ((PTR)sals.sals);
+      break;
+
+    case bp_watchpoint:
+    case bp_hardware_watchpoint:
+    case bp_read_watchpoint:
+    case bp_access_watchpoint:
+      innermost_block = NULL;
+      /* The issue arises of what context to evaluate this in.  The same
+	 one as when it was set, but what does that mean when symbols have
+	 been re-read?  We could save the filename and functionname, but
+	 if the context is more local than that, the best we could do would
+	 be something like how many levels deep and which index at that
+	 particular level, but that's going to be less stable than filenames
+	 or functionnames.  */
+      /* So for now, just use a global context.  */
+      if (b->exp)
+	free ((PTR)b->exp);
+      b->exp = parse_expression (b->exp_string);
+      b->exp_valid_block = innermost_block;
+      mark = value_mark ();
+      if (b->val)
+	value_free (b->val);
+      b->val = evaluate_expression (b->exp);
+      release_value (b->val);
+      if (VALUE_LAZY (b->val))
+	value_fetch_lazy (b->val);
+
+      if (b->cond_string != NULL)
+	{
+	  s = b->cond_string;
+	  if (b->cond)
+	    free ((PTR)b->cond);
+	  b->cond = parse_exp_1 (&s, (struct block *)0, 0);
+	}
+      if (b->enable == enabled)
+	mention (b);
+      value_free_to_mark (mark);
+      break;
+    case bp_catch_catch:  
+    case bp_catch_throw:  
+      break;
+    /* We needn't really do anything to reset these, since the mask
+       that requests them is unaffected by e.g., new libraries being
+       loaded. */
+    case bp_catch_fork:
+    case bp_catch_vfork:
+    case bp_catch_exec:
+      break;
+ 
+    default:
+      printf_filtered ("Deleting unknown breakpoint type %d\n", b->type);
+      /* fall through */
+    /* Delete longjmp breakpoints, they will be reset later by
+       breakpoint_re_set.  */
+    case bp_longjmp:
+    case bp_longjmp_resume:
+      delete_breakpoint (b);
+      break;
+
+    /* This breakpoint is special, it's set up when the inferior
+       starts and we really don't want to touch it.  */
+    case bp_shlib_event:
+
+    /* Keep temporary breakpoints, which can be encountered when we step
+       over a dlopen call and SOLIB_ADD is resetting the breakpoints.
+       Otherwise these should have been blown away via the cleanup chain
+       or by breakpoint_init_inferior when we rerun the executable.  */
+    case bp_until:
+    case bp_finish:
+    case bp_watchpoint_scope:
+    case bp_call_dummy:
+    case bp_step_resume:
+      break;
+    }
+
+  return 0;
+}
+
+/* Re-set all breakpoints after symbols have been re-loaded.  */
+void
+breakpoint_re_set ()
+{
+  struct breakpoint *b, *temp;
+  enum language save_language;
+  int save_input_radix;
+  static char message1[] = "Error in re-setting breakpoint %d:\n";
+  char message[sizeof (message1) + 30 /* slop */];
+  
+  save_language = current_language->la_language;
+  save_input_radix = input_radix;
+  ALL_BREAKPOINTS_SAFE (b, temp)
+    {
+      sprintf (message, message1, b->number);	/* Format possible error msg */
+      catch_errors (breakpoint_re_set_one, b, message, RETURN_MASK_ALL);
+    }
+  set_language (save_language);
+  input_radix = save_input_radix;
+
+#ifdef GET_LONGJMP_TARGET
+  create_longjmp_breakpoint ("longjmp");
+  create_longjmp_breakpoint ("_longjmp");
+  create_longjmp_breakpoint ("siglongjmp");
+  create_longjmp_breakpoint ("_siglongjmp");
+  create_longjmp_breakpoint (NULL);
+#endif
+
+#if 0
+  /* Took this out (temporarily at least), since it produces an extra 
+     blank line at startup. This messes up the gdbtests. -PB */
+  /* Blank line to finish off all those mention() messages we just printed.  */
+  printf_filtered ("\n");
+#endif
+}
+
+/* Set ignore-count of breakpoint number BPTNUM to COUNT.
+   If from_tty is nonzero, it prints a message to that effect,
+   which ends with a period (no newline).  */
+
+/* Reset the thread number of this breakpoint:
+
+   - If the breakpoint is for all threads, leave it as-is.
+   - Else, reset it to the current thread for inferior_pid. */
+void
+breakpoint_re_set_thread (b)
+  struct breakpoint *  b;
+{
+  if (b->thread != -1)
+    {
+      if (in_thread_list (inferior_pid))
+        b->thread = pid_to_thread_id (inferior_pid);
+    }
+}
+
+void
+set_ignore_count (bptnum, count, from_tty)
+     int bptnum, count, from_tty;
+{
+  register struct breakpoint *b;
+
+  if (count < 0)
+    count = 0;
+
+  ALL_BREAKPOINTS (b)
+    if (b->number == bptnum)
+      {
+	b->ignore_count = count;
+	if (!from_tty)
+	  return;
+	else if (count == 0)
+	  printf_filtered ("Will stop next time breakpoint %d is reached.",
+			   bptnum);
+	else if (count == 1)
+	  printf_filtered ("Will ignore next crossing of breakpoint %d.",
+			   bptnum);
+	else
+	  printf_filtered ("Will ignore next %d crossings of breakpoint %d.",
+		  count, bptnum);
+	breakpoints_changed ();
+	return;
+      }
+
+  error ("No breakpoint number %d.", bptnum);
+}
+
+/* Clear the ignore counts of all breakpoints.  */
+void
+breakpoint_clear_ignore_counts ()
+{
+  struct breakpoint *b;
+
+  ALL_BREAKPOINTS (b)
+    b->ignore_count = 0;
+}
+
+/* Command to set ignore-count of breakpoint N to COUNT.  */
+
+static void
+ignore_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *p = args;
+  register int num;
+
+  if (p == 0)
+    error_no_arg ("a breakpoint number");
+  
+  num = get_number (&p);
+
+  if (*p == 0)
+    error ("Second argument (specified ignore-count) is missing.");
+
+  set_ignore_count (num,
+		    longest_to_int (value_as_long (parse_and_eval (p))),
+		    from_tty);
+  printf_filtered ("\n");
+  breakpoints_changed ();
+}
+
+/* Call FUNCTION on each of the breakpoints
+   whose numbers are given in ARGS.  */
+
+static void
+map_breakpoint_numbers (args, function)
+     char *args;
+     void (*function) PARAMS ((struct breakpoint *));
+{
+  register char *p = args;
+  char *p1;
+  register int num;
+  register struct breakpoint *b;
+
+  if (p == 0)
+    error_no_arg ("one or more breakpoint numbers");
+
+  while (*p)
+    {
+      p1 = p;
+      
+      num = get_number (&p1);
+
+      ALL_BREAKPOINTS (b)
+	if (b->number == num)
+	  {
+	    struct breakpoint *related_breakpoint = b->related_breakpoint;
+	    function (b);
+	    if (related_breakpoint)
+	      function (related_breakpoint);
+	    goto win;
+	  }
+      printf_unfiltered ("No breakpoint number %d.\n", num);
+    win:
+      p = p1;
+    }
+}
+
+void
+disable_breakpoint (bpt)
+     struct breakpoint *bpt;
+{
+  /* Never disable a watchpoint scope breakpoint; we want to
+     hit them when we leave scope so we can delete both the
+     watchpoint and its scope breakpoint at that time.  */
+  if (bpt->type == bp_watchpoint_scope)
+    return;
+
+  bpt->enable = disabled;
+
+  check_duplicates (bpt->address, bpt->section);
+
+  if (modify_breakpoint_hook)
+    modify_breakpoint_hook (bpt);
+}
+
+/* ARGSUSED */
+static void
+disable_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  register struct breakpoint *bpt;
+  if (args == 0)
+    ALL_BREAKPOINTS (bpt)
+      switch (bpt->type)
+	{
+        case bp_none:
+          warning ("attempted to disable apparently deleted breakpoint #%d?\n", bpt->number);
+          continue;
+	case bp_breakpoint:
+        case bp_catch_load:
+        case bp_catch_unload:
+        case bp_catch_fork:
+        case bp_catch_vfork:
+        case bp_catch_exec:
+	case bp_catch_catch:
+	case bp_catch_throw:
+        case bp_hardware_breakpoint:
+        case bp_watchpoint:
+        case bp_hardware_watchpoint:
+        case bp_read_watchpoint:
+        case bp_access_watchpoint:
+	  disable_breakpoint (bpt);
+	default:
+	  continue;
+	}
+  else
+    map_breakpoint_numbers (args, disable_breakpoint);
+}
+
+static void
+do_enable_breakpoint (bpt, disposition)
+     struct breakpoint *bpt;
+     enum bpdisp disposition;
+{
+  struct frame_info *save_selected_frame = NULL;
+  int save_selected_frame_level = -1;
+  int target_resources_ok, other_type_used;
+  struct value *mark;
+
+  if (bpt->type == bp_hardware_breakpoint)
+    {
+      int i;
+      i = hw_breakpoint_used_count();
+      target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+		bp_hardware_breakpoint, i+1, 0);
+      if (target_resources_ok == 0)
+        error ("No hardware breakpoint support in the target.");
+      else if (target_resources_ok < 0)
+        error ("Hardware breakpoints used exceeds limit.");
+    }
+
+  bpt->enable = enabled;
+  bpt->disposition = disposition;
+  check_duplicates (bpt->address, bpt->section);
+  breakpoints_changed ();
+
+  if (bpt->type == bp_watchpoint || bpt->type == bp_hardware_watchpoint ||
+      bpt->type == bp_read_watchpoint || bpt->type == bp_access_watchpoint)
+    {
+      if (bpt->exp_valid_block != NULL)
+	{
+	  struct frame_info *fr =
+
+          /* Ensure that we have the current frame.  Else, this
+             next query may pessimistically be answered as, "No,
+             not within current scope". */
+          get_current_frame ();
+          fr = find_frame_addr_in_frame_chain (bpt->watchpoint_frame);
+	  if (fr == NULL)
+	    {
+	      printf_filtered ("\
+Cannot enable watchpoint %d because the block in which its expression\n\
+is valid is not currently in scope.\n", bpt->number);
+	      bpt->enable = disabled;
+	      return;
+	    }
+
+	  save_selected_frame = selected_frame;
+	  save_selected_frame_level = selected_frame_level;
+	  select_frame (fr, -1);
+	}
+
+      value_free (bpt->val);
+      mark = value_mark ();
+      bpt->val = evaluate_expression (bpt->exp);
+      release_value (bpt->val);
+      if (VALUE_LAZY (bpt->val))
+	value_fetch_lazy (bpt->val);
+
+      if (bpt->type == bp_hardware_watchpoint ||
+           bpt->type == bp_read_watchpoint ||
+           bpt->type == bp_access_watchpoint)
+      {
+        int i = hw_watchpoint_used_count (bpt->type, &other_type_used);
+        int mem_cnt = can_use_hardware_watchpoint (bpt->val);
+
+        /* Hack around 'unused var' error for some targets here */
+        (void) mem_cnt, i;
+        target_resources_ok = TARGET_CAN_USE_HARDWARE_WATCHPOINT(
+                bpt->type, i + mem_cnt, other_type_used);
+        /* we can consider of type is bp_hardware_watchpoint, convert to 
+	   bp_watchpoint in the following condition */
+        if (target_resources_ok < 0)
+	  {
+             printf_filtered("\
+Cannot enable watchpoint %d because target watch resources\n\
+have been allocated for other watchpoints.\n", bpt->number);
+	     bpt->enable = disabled;
+	     value_free_to_mark (mark);
+	     return;
+          }
+      }
+
+      if (save_selected_frame_level >= 0)
+	select_and_print_frame (save_selected_frame, save_selected_frame_level);
+      value_free_to_mark (mark);
+    }
+  if (modify_breakpoint_hook)
+    modify_breakpoint_hook (bpt);
+}
+
+void
+enable_breakpoint (bpt)
+     struct breakpoint *bpt;
+{
+  do_enable_breakpoint (bpt, bpt->disposition);
+}
+
+/* The enable command enables the specified breakpoints (or all defined
+   breakpoints) so they once again become (or continue to be) effective
+   in stopping the inferior. */
+
+/* ARGSUSED */
+static void
+enable_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  register struct breakpoint *bpt;
+  if (args == 0)
+    ALL_BREAKPOINTS (bpt)
+      switch (bpt->type)
+	{
+        case bp_none:
+          warning ("attempted to enable apparently deleted breakpoint #%d?\n", bpt->number);
+          continue;
+	case bp_breakpoint:
+        case bp_catch_load:
+        case bp_catch_unload:
+        case bp_catch_fork:
+        case bp_catch_vfork:
+        case bp_catch_exec:
+	case bp_catch_catch:
+	case bp_catch_throw:
+	case bp_hardware_breakpoint:
+	case bp_watchpoint:
+	case bp_hardware_watchpoint:
+	case bp_read_watchpoint:
+	case bp_access_watchpoint:
+	  enable_breakpoint (bpt);
+	default:
+	  continue;
+	}
+  else
+    map_breakpoint_numbers (args, enable_breakpoint);
+}
+
+static void
+enable_once_breakpoint (bpt)
+     struct breakpoint *bpt;
+{
+  do_enable_breakpoint (bpt, disable);
+}
+
+/* ARGSUSED */
+static void
+enable_once_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  map_breakpoint_numbers (args, enable_once_breakpoint);
+}
+
+static void
+enable_delete_breakpoint (bpt)
+     struct breakpoint *bpt;
+{
+  do_enable_breakpoint (bpt, del);
+}
+
+/* ARGSUSED */
+static void
+enable_delete_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  map_breakpoint_numbers (args, enable_delete_breakpoint);
+}
+
+/* Use default_breakpoint_'s, or nothing if they aren't valid.  */
+
+struct symtabs_and_lines
+decode_line_spec_1 (string, funfirstline)
+     char *string;
+     int funfirstline;
+{
+  struct symtabs_and_lines sals;
+  if (string == 0)
+    error ("Empty line specification.");
+  if (default_breakpoint_valid)
+    sals = decode_line_1 (&string, funfirstline,
+			  default_breakpoint_symtab, default_breakpoint_line,
+			  (char ***)NULL);
+  else
+    sals = decode_line_1 (&string, funfirstline,
+			  (struct symtab *)NULL, 0, (char ***)NULL);
+  if (*string)
+    error ("Junk at end of line specification: %s", string);
+  return sals;
+}
+
+void
+_initialize_breakpoint ()
+{
+  struct cmd_list_element *c;
+
+  breakpoint_chain = 0;
+  /* Don't bother to call set_breakpoint_count.  $bpnum isn't useful
+     before a breakpoint is set.  */
+  breakpoint_count = 0;
+
+  add_com ("ignore", class_breakpoint, ignore_command,
+	   "Set ignore-count of breakpoint number N to COUNT.\n\
+Usage is `ignore N COUNT'.");
+  if (xdb_commands)
+    add_com_alias("bc", "ignore", class_breakpoint, 1);
+
+  add_com ("commands", class_breakpoint, commands_command,
+	   "Set commands to be executed when a breakpoint is hit.\n\
+Give breakpoint number as argument after \"commands\".\n\
+With no argument, the targeted breakpoint is the last one set.\n\
+The commands themselves follow starting on the next line.\n\
+Type a line containing \"end\" to indicate the end of them.\n\
+Give \"silent\" as the first line to make the breakpoint silent;\n\
+then no output is printed when it is hit, except what the commands print.");
+
+  add_com ("condition", class_breakpoint, condition_command,
+	   "Specify breakpoint number N to break only if COND is true.\n\
+Usage is `condition N COND', where N is an integer and COND is an\n\
+expression to be evaluated whenever breakpoint N is reached.  ");
+
+  add_com ("tbreak", class_breakpoint, tbreak_command,
+	   "Set a temporary breakpoint.  Args like \"break\" command.\n\
+Like \"break\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit.  Equivalent to \"break\" followed\n\
+by using \"enable delete\" on the breakpoint number.");
+  add_com("txbreak", class_breakpoint, tbreak_at_finish_command,
+          "Set temporary breakpoint at procedure exit.  Either there should\n\
+be no argument or the argument must be a depth.\n");
+
+  add_com ("hbreak", class_breakpoint, hbreak_command,
+	   "Set a hardware assisted  breakpoint. Args like \"break\" command.\n\
+Like \"break\" except the breakpoint requires hardware support,\n\
+some target hardware may not have this support.");
+
+  add_com ("thbreak", class_breakpoint, thbreak_command,
+	   "Set a temporary hardware assisted breakpoint. Args like \"break\" command.\n\
+Like \"hbreak\" except the breakpoint is only temporary,\n\
+so it will be deleted when hit.");
+
+  add_prefix_cmd ("enable", class_breakpoint, enable_command,
+		  "Enable some breakpoints.\n\
+Give breakpoint numbers (separated by spaces) as arguments.\n\
+With no subcommand, breakpoints are enabled until you command otherwise.\n\
+This is used to cancel the effect of the \"disable\" command.\n\
+With a subcommand you can enable temporarily.",
+		  &enablelist, "enable ", 1, &cmdlist);
+  if (xdb_commands)
+      add_com("ab", class_breakpoint, enable_command,
+		      "Enable some breakpoints.\n\
+Give breakpoint numbers (separated by spaces) as arguments.\n\
+With no subcommand, breakpoints are enabled until you command otherwise.\n\
+This is used to cancel the effect of the \"disable\" command.\n\
+With a subcommand you can enable temporarily.");
+
+  add_com_alias ("en", "enable", class_breakpoint, 1);
+
+  add_abbrev_prefix_cmd ("breakpoints", class_breakpoint, enable_command,
+		  "Enable some breakpoints.\n\
+Give breakpoint numbers (separated by spaces) as arguments.\n\
+This is used to cancel the effect of the \"disable\" command.\n\
+May be abbreviated to simply \"enable\".\n",
+		  &enablebreaklist, "enable breakpoints ", 1, &enablelist);
+
+  add_cmd ("once", no_class, enable_once_command,
+	   "Enable breakpoints for one hit.  Give breakpoint numbers.\n\
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
+	   &enablebreaklist);
+
+  add_cmd ("delete", no_class, enable_delete_command,
+	   "Enable breakpoints and delete when hit.  Give breakpoint numbers.\n\
+If a breakpoint is hit while enabled in this fashion, it is deleted.",
+	   &enablebreaklist);
+
+  add_cmd ("delete", no_class, enable_delete_command,
+	   "Enable breakpoints and delete when hit.  Give breakpoint numbers.\n\
+If a breakpoint is hit while enabled in this fashion, it is deleted.",
+	   &enablelist);
+
+  add_cmd ("once", no_class, enable_once_command,
+	   "Enable breakpoints for one hit.  Give breakpoint numbers.\n\
+If a breakpoint is hit while enabled in this fashion, it becomes disabled.",
+	   &enablelist);
+
+  add_prefix_cmd ("disable", class_breakpoint, disable_command,
+	   "Disable some breakpoints.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To disable all breakpoints, give no argument.\n\
+A disabled breakpoint is not forgotten, but has no effect until reenabled.",
+		  &disablelist, "disable ", 1, &cmdlist);
+  add_com_alias ("dis", "disable", class_breakpoint, 1);
+  add_com_alias ("disa", "disable", class_breakpoint, 1);
+  if (xdb_commands)
+    add_com("sb", class_breakpoint, disable_command,
+	        "Disable some breakpoints.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To disable all breakpoints, give no argument.\n\
+A disabled breakpoint is not forgotten, but has no effect until reenabled.");
+
+  add_cmd ("breakpoints", class_alias, disable_command,
+	   "Disable some breakpoints.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To disable all breakpoints, give no argument.\n\
+A disabled breakpoint is not forgotten, but has no effect until reenabled.\n\
+This command may be abbreviated \"disable\".",
+	   &disablelist);
+
+  add_prefix_cmd ("delete", class_breakpoint, delete_command,
+	   "Delete some breakpoints or auto-display expressions.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To delete all breakpoints, give no argument.\n\
+\n\
+Also a prefix command for deletion of other GDB objects.\n\
+The \"unset\" command is also an alias for \"delete\".",
+		  &deletelist, "delete ", 1, &cmdlist);
+  add_com_alias ("d", "delete", class_breakpoint, 1);
+  if (xdb_commands)
+    add_com ("db", class_breakpoint, delete_command,
+    	   "Delete some breakpoints.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To delete all breakpoints, give no argument.\n");
+
+  add_cmd ("breakpoints", class_alias, delete_command,
+	   "Delete some breakpoints or auto-display expressions.\n\
+Arguments are breakpoint numbers with spaces in between.\n\
+To delete all breakpoints, give no argument.\n\
+This command may be abbreviated \"delete\".",
+	   &deletelist);
+
+  add_com ("clear", class_breakpoint, clear_command,
+	   concat ("Clear breakpoint at specified line or function.\n\
+Argument may be line number, function name, or \"*\" and an address.\n\
+If line number is specified, all breakpoints in that line are cleared.\n\
+If function is specified, breakpoints at beginning of function are cleared.\n\
+If an address is specified, breakpoints at that address are cleared.\n\n",
+"With no argument, clears all breakpoints in the line that the selected frame\n\
+is executing in.\n\
+\n\
+See also the \"delete\" command which clears breakpoints by number.", NULL));
+
+  add_com ("break", class_breakpoint, break_command,
+	   concat ("Set breakpoint at specified line or function.\n\
+Argument may be line number, function name, or \"*\" and an address.\n\
+If line number is specified, break at start of code for that line.\n\
+If function is specified, break at start of code for that function.\n\
+If an address is specified, break at that exact address.\n",
+"With no arg, uses current execution address of selected stack frame.\n\
+This is useful for breaking on return to a stack frame.\n\
+\n\
+Multiple breakpoints at one place are permitted, and useful if conditional.\n\
+\n\
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
+  add_com_alias ("b", "break", class_run, 1);
+  add_com_alias ("br", "break", class_run, 1);
+  add_com_alias ("bre", "break", class_run, 1);
+  add_com_alias ("brea", "break", class_run, 1);
+
+  add_com("xbreak", class_breakpoint, break_at_finish_command,
+          concat("Set breakpoint at procedure exit. \n\
+Argument may be function name, or \"*\" and an address.\n\
+If function is specified, break at end of code for that function.\n\
+If an address is specified, break at the end of the function that contains \n\
+that exact address.\n",
+"With no arg, uses current execution address of selected stack frame.\n\
+This is useful for breaking on return to a stack frame.\n\
+\n\
+Multiple breakpoints at one place are permitted, and useful if conditional.\n\
+\n\
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.", NULL));
+  add_com_alias ("xb", "xbreak", class_breakpoint, 1);
+  add_com_alias ("xbr", "xbreak", class_breakpoint, 1);
+  add_com_alias ("xbre", "xbreak", class_breakpoint, 1);
+  add_com_alias ("xbrea", "xbreak", class_breakpoint, 1);
+
+  if (xdb_commands)
+    {
+      add_com_alias ("ba", "break", class_breakpoint, 1);
+      add_com_alias ("bu", "ubreak", class_breakpoint, 1);
+      add_com ("bx", class_breakpoint, break_at_finish_at_depth_command,
+          "Set breakpoint at procedure exit.  Either there should\n\
+be no argument or the argument must be a depth.\n");
+    }
+
+  if (dbx_commands)
+    {
+      add_abbrev_prefix_cmd("stop", class_breakpoint, stop_command, 
+           "Break in function/address or break at a line in the current file.",
+           &stoplist, "stop ", 1, &cmdlist);
+      add_cmd("in", class_breakpoint, stopin_command,
+              "Break in function or address.\n", &stoplist);
+      add_cmd("at", class_breakpoint, stopat_command,
+              "Break at a line in the current file.\n", &stoplist);
+      add_com("status", class_info, breakpoints_info, 
+	    concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint     - normal breakpoint\n\
+\twatchpoint     - watchpoint\n\
+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
+breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.", NULL));
+    }
+
+  add_info ("breakpoints", breakpoints_info,
+	    concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint     - normal breakpoint\n\
+\twatchpoint     - watchpoint\n\
+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
+breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.", NULL));
+
+  if (xdb_commands)
+    add_com("lb", class_breakpoint, breakpoints_info,
+	    concat ("Status of user-settable breakpoints, or breakpoint number NUMBER.\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint     - normal breakpoint\n\
+\twatchpoint     - watchpoint\n\
+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
+breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.", NULL));
+
+#if MAINTENANCE_CMDS
+
+  add_cmd ("breakpoints", class_maintenance, maintenance_info_breakpoints,
+	    concat ("Status of all breakpoints, or breakpoint number NUMBER.\n\
+The \"Type\" column indicates one of:\n\
+\tbreakpoint     - normal breakpoint\n\
+\twatchpoint     - watchpoint\n\
+\tlongjmp        - internal breakpoint used to step through longjmp()\n\
+\tlongjmp resume - internal breakpoint at the target of longjmp()\n\
+\tuntil          - internal breakpoint used by the \"until\" command\n\
+\tfinish         - internal breakpoint used by the \"finish\" command\n",
+"The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\n\
+the disposition of the breakpoint after it gets hit.  \"dis\" means that the\n\
+breakpoint will be disabled.  The \"Address\" and \"What\" columns indicate the\n\
+address and file/line number respectively.\n\n",
+"Convenience variable \"$_\" and default examine address for \"x\"\n\
+are set to the address of the last breakpoint listed.\n\n\
+Convenience variable \"$bpnum\" contains the number of the last\n\
+breakpoint set.", NULL),
+	   &maintenanceinfolist);
+
+#endif	/* MAINTENANCE_CMDS */
+
+  add_com ("catch", class_breakpoint, catch_command,
+         "Set catchpoints to catch events.\n\
+Raised signals may be caught:\n\
+\tcatch signal              - all signals\n\
+\tcatch signal <signame>    - a particular signal\n\
+Raised exceptions may be caught:\n\
+\tcatch throw               - all exceptions, when thrown\n\
+\tcatch throw <exceptname>  - a particular exception, when thrown\n\
+\tcatch catch               - all exceptions, when caught\n\
+\tcatch catch <exceptname>  - a particular exception, when caught\n\
+Thread or process events may be caught:\n\
+\tcatch thread_start        - any threads, just after creation\n\
+\tcatch thread_exit         - any threads, just before expiration\n\
+\tcatch thread_join         - any threads, just after joins\n\
+Process events may be caught:\n\
+\tcatch start               - any processes, just after creation\n\
+\tcatch exit                - any processes, just before expiration\n\
+\tcatch fork                - calls to fork()\n\
+\tcatch vfork               - calls to vfork()\n\
+\tcatch exec                - calls to exec()\n\
+Dynamically-linked library events may be caught:\n\
+\tcatch load                - loads of any library\n\
+\tcatch load <libname>      - loads of a particular library\n\
+\tcatch unload              - unloads of any library\n\
+\tcatch unload <libname>    - unloads of a particular library\n\
+The act of your program's execution stopping may also be caught:\n\
+\tcatch stop\n\n\
+C++ exceptions may be caught:\n\
+\tcatch throw               - all exceptions, when thrown\n\
+\tcatch catch               - all exceptions, when caught\n\
+\n\
+Do \"help set follow-fork-mode\" for info on debugging your program\n\
+after a fork or vfork is caught.\n\n\
+Do \"help breakpoints\" for info on other commands dealing with breakpoints.");
+ 
+  add_com ("tcatch", class_breakpoint, tcatch_command,
+         "Set temporary catchpoints to catch events.\n\
+Args like \"catch\" command.\n\
+Like \"catch\" except the catchpoint is only temporary,\n\
+so it will be deleted when hit.  Equivalent to \"catch\" followed\n\
+by using \"enable delete\" on the catchpoint number.");
+ 
+add_com ("watch", class_breakpoint, watch_command,
+
+	   "Set a watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression changes.");
+
+  add_com ("rwatch", class_breakpoint, rwatch_command,
+	   "Set a read watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is read.");
+
+  add_com ("awatch", class_breakpoint, awatch_command,
+	   "Set a watchpoint for an expression.\n\
+A watchpoint stops execution of your program whenever the value of\n\
+an expression is either read or written.");
+
+  add_info ("watchpoints", breakpoints_info,
+	    "Synonym for ``info breakpoints''.");
+
+
+  c = add_set_cmd ("can-use-hw-watchpoints", class_support, var_zinteger,
+                   (char *) &can_use_hw_watchpoints,
+                   "Set debugger's willingness to use watchpoint hardware.\n\
+If zero, gdb will not use hardware for new watchpoints, even if\n\
+such is available.  (However, any hardware watchpoints that were\n\
+created before setting this to nonzero, will continue to use watchpoint\n\
+hardware.)",
+               &setlist);
+  add_show_from_set (c, &showlist);
+
+  can_use_hw_watchpoints = 1;
+}
diff --git a/gdb/breakpoint.h b/gdb/breakpoint.h
new file mode 100644
index 0000000..e2febac
--- /dev/null
+++ b/gdb/breakpoint.h
@@ -0,0 +1,604 @@
+/* Data structures associated with breakpoints in GDB.
+   Copyright (C) 1992, 93, 94, 95, 96, 98, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (BREAKPOINT_H)
+#define BREAKPOINT_H 1
+
+#include "frame.h"
+#include "value.h"
+
+/* This is the maximum number of bytes a breakpoint instruction can take.
+   Feel free to increase it.  It's just used in a few places to size
+   arrays that should be independent of the target architecture.  */
+
+#define	BREAKPOINT_MAX	16
+
+/* Type of breakpoint. */
+/* FIXME In the future, we should fold all other breakpoint-like things into
+   here.  This includes:
+
+   * single-step (for machines where we have to simulate single stepping)
+      (probably, though perhaps it is better for it to look as much as
+      possible like a single-step to wait_for_inferior).  */
+
+enum bptype {
+  bp_none = 0,                  /* Eventpoint has been deleted. */
+  bp_breakpoint,		/* Normal breakpoint */
+  bp_hardware_breakpoint,	/* Hardware assisted breakpoint */
+  bp_until,			/* used by until command */
+  bp_finish,			/* used by finish command */
+  bp_watchpoint,		/* Watchpoint */
+  bp_hardware_watchpoint,	/* Hardware assisted watchpoint */
+  bp_read_watchpoint,		/* read watchpoint, (hardware assisted) */
+  bp_access_watchpoint,		/* access watchpoint, (hardware assisted) */
+  bp_longjmp,			/* secret breakpoint to find longjmp() */
+  bp_longjmp_resume,		/* secret breakpoint to escape longjmp() */
+
+  /* Used by wait_for_inferior for stepping over subroutine calls, for
+     stepping over signal handlers, and for skipping prologues.  */
+  bp_step_resume,
+
+  /* Used by wait_for_inferior for stepping over signal handlers.  */
+  bp_through_sigtramp,
+
+  /* Used to detect when a watchpoint expression has gone out of
+     scope.  These breakpoints are usually not visible to the user.
+
+     This breakpoint has some interesting properties:
+
+       1) There's always a 1:1 mapping between watchpoints
+       on local variables and watchpoint_scope breakpoints.
+
+       2) It automatically deletes itself and the watchpoint it's
+       associated with when hit.
+
+       3) It can never be disabled.  */
+  bp_watchpoint_scope,
+
+  /* The breakpoint at the end of a call dummy.  */
+  /* FIXME: What if the function we are calling longjmp()s out of the
+     call, or the user gets out with the "return" command?  We currently
+     have no way of cleaning up the breakpoint in these (obscure) situations.
+     (Probably can solve this by noticing longjmp, "return", etc., it's
+     similar to noticing when a watchpoint on a local variable goes out
+     of scope (with hardware support for watchpoints)).  */
+  bp_call_dummy,
+
+  /* Some dynamic linkers (HP, maybe Solaris) can arrange for special
+     code in the inferior to run when significant events occur in the
+     dynamic linker (for example a library is loaded or unloaded).
+
+     By placing a breakpoint in this magic code GDB will get control
+     when these significant events occur.  GDB can then re-examine
+     the dynamic linker's data structures to discover any newly loaded
+     dynamic libraries.  */
+  bp_shlib_event,
+ 
+  /* These breakpoints are used to implement the "catch load" command
+     on platforms whose dynamic linkers support such functionality.  */
+  bp_catch_load,
+ 
+  /* These breakpoints are used to implement the "catch unload" command
+     on platforms whose dynamic linkers support such functionality.  */
+  bp_catch_unload,
+ 
+  /* These are not really breakpoints, but are catchpoints that
+     implement the "catch fork", "catch vfork" and "catch exec" commands
+     on platforms whose kernel support such functionality.  (I.e.,
+     kernels which can raise an event when a fork or exec occurs, as
+     opposed to the debugger setting breakpoints on functions named
+     "fork" or "exec".) */
+  bp_catch_fork,
+  bp_catch_vfork,
+  bp_catch_exec,
+
+  /* These are catchpoints to implement "catch catch" and "catch throw"
+     commands for C++ exception handling. */
+  bp_catch_catch,
+  bp_catch_throw
+ 
+};
+
+/* States of enablement of breakpoint. */
+
+enum enable { 
+  disabled,           /* The eventpoint is inactive, and cannot trigger. */
+  enabled,            /* The eventpoint is active, and can trigger. */
+  shlib_disabled,     /* The eventpoint's address is within an unloaded solib.
+                         The eventpoint will be automatically enabled & reset
+                         when that solib is loaded. */
+  call_disabled       /* The eventpoint has been disabled while a call into
+                         the inferior is "in flight", because some eventpoints
+                         interfere with the implementation of a call on some
+                         targets.  The eventpoint will be automatically enabled
+                         & reset when the call "lands" (either completes, or
+                         stops at another eventpoint). */
+};
+
+
+/* Disposition of breakpoint.  Ie: what to do after hitting it. */
+
+enum bpdisp {
+  del,				/* Delete it */
+  del_at_next_stop,		/* Delete at next stop, whether hit or not */
+  disable,			/* Disable it */
+  donttouch			/* Leave it alone */
+};
+
+/* Note that the ->silent field is not currently used by any commands
+   (though the code is in there if it was to be, and set_raw_breakpoint
+   does set it to 0).  I implemented it because I thought it would be
+   useful for a hack I had to put in; I'm going to leave it in because
+   I can see how there might be times when it would indeed be useful */
+
+/* This is for a breakpoint or a watchpoint.  */
+
+struct breakpoint
+{
+  struct breakpoint *next;
+  /* Type of breakpoint. */
+  enum bptype type;
+  /* Zero means disabled; remember the info but don't break here.  */
+  enum enable enable;
+  /* What to do with this breakpoint after we hit it. */
+  enum bpdisp disposition;
+  /* Number assigned to distinguish breakpoints.  */
+  int number;
+
+  /* Address to break at, or NULL if not a breakpoint.  */
+  CORE_ADDR address;
+
+  /* Line number of this address.  Only matters if address is
+     non-NULL.  */
+
+  int line_number;
+
+  /* Source file name of this address.  Only matters if address is
+     non-NULL.  */
+
+  char *source_file;
+
+  /* Non-zero means a silent breakpoint (don't print frame info
+     if we stop here). */
+  unsigned char silent;
+  /* Number of stops at this breakpoint that should
+     be continued automatically before really stopping.  */
+  int ignore_count;
+  /* "Real" contents of byte where breakpoint has been inserted.
+     Valid only when breakpoints are in the program.  Under the complete
+     control of the target insert_breakpoint and remove_breakpoint routines.
+     No other code should assume anything about the value(s) here.  */
+  char shadow_contents[BREAKPOINT_MAX];
+  /* Nonzero if this breakpoint is now inserted.  Only matters if address
+     is non-NULL.  */
+  char inserted;
+  /* Nonzero if this is not the first breakpoint in the list
+     for the given address.  Only matters if address is non-NULL.  */
+  char duplicate;
+  /* Chain of command lines to execute when this breakpoint is hit.  */
+  struct command_line *commands;
+  /* Stack depth (address of frame).  If nonzero, break only if fp
+     equals this.  */
+  CORE_ADDR frame;
+  /* Conditional.  Break only if this expression's value is nonzero.  */
+  struct expression *cond;
+
+  /* String we used to set the breakpoint (malloc'd).  Only matters if
+     address is non-NULL.  */
+  char *addr_string;
+  /* Language we used to set the breakpoint.  */
+  enum language language;
+  /* Input radix we used to set the breakpoint.  */
+  int input_radix;
+  /* String form of the breakpoint condition (malloc'd), or NULL if there
+     is no condition.  */
+  char *cond_string;
+  /* String form of exp (malloc'd), or NULL if none.  */
+  char *exp_string;
+
+  /* The expression we are watching, or NULL if not a watchpoint.  */
+  struct expression *exp;
+  /* The largest block within which it is valid, or NULL if it is
+     valid anywhere (e.g. consists just of global symbols).  */
+  struct block *exp_valid_block;
+  /* Value of the watchpoint the last time we checked it.  */
+  value_ptr val;
+
+  /* Holds the value chain for a hardware watchpoint expression.  */
+  value_ptr val_chain;
+
+  /* Holds the address of the related watchpoint_scope breakpoint
+     when using watchpoints on local variables (might the concept
+     of a related breakpoint be useful elsewhere, if not just call
+     it the watchpoint_scope breakpoint or something like that. FIXME).  */
+  struct breakpoint *related_breakpoint; 
+
+  /* Holds the frame address which identifies the frame this watchpoint
+     should be evaluated in, or NULL if the watchpoint should be evaluated
+     on the outermost frame.  */
+  CORE_ADDR watchpoint_frame;
+
+  /* Thread number for thread-specific breakpoint, or -1 if don't care */
+  int thread;
+
+  /* Count of the number of times this breakpoint was taken, dumped
+     with the info, but not used for anything else.  Useful for
+     seeing how many times you hit a break prior to the program
+     aborting, so you can back up to just before the abort.  */
+  int hit_count;
+
+  /* Filename of a dynamically-linked library (dll), used for bp_catch_load
+     and bp_catch_unload (malloc'd), or NULL if any library is significant.  */
+  char *  dll_pathname;
+ 
+  /* Filename of a dll whose state change (e.g., load or unload)
+     triggered this catchpoint.  This field is only vaid immediately
+     after this catchpoint has triggered.  */
+  char *  triggered_dll_pathname;
+ 
+  /* Process id of a child process whose forking triggered this catchpoint.
+     This field is only vaid immediately after this catchpoint has triggered.  */
+  int  forked_inferior_pid;
+ 
+  /* Filename of a program whose exec triggered this catchpoint.  This
+     field is only vaid immediately after this catchpoint has triggered.  */
+  char *  exec_pathname;
+  
+  asection *section;
+};
+
+/* The following stuff is an abstract data type "bpstat" ("breakpoint status").
+   This provides the ability to determine whether we have stopped at a
+   breakpoint, and what we should do about it.  */
+
+typedef struct bpstats *bpstat;
+
+/* Interface:  */
+/* Clear a bpstat so that it says we are not at any breakpoint.
+   Also free any storage that is part of a bpstat.  */
+extern void bpstat_clear PARAMS ((bpstat *));
+
+/* Return a copy of a bpstat.  Like "bs1 = bs2" but all storage that
+   is part of the bpstat is copied as well.  */
+extern bpstat bpstat_copy PARAMS ((bpstat));
+
+extern bpstat bpstat_stop_status PARAMS ((CORE_ADDR *, int));
+
+/* This bpstat_what stuff tells wait_for_inferior what to do with a
+   breakpoint (a challenging task).  */
+
+enum bpstat_what_main_action {
+  /* Perform various other tests; that is, this bpstat does not
+     say to perform any action (e.g. failed watchpoint and nothing
+     else).  */
+  BPSTAT_WHAT_KEEP_CHECKING,
+
+  /* Rather than distinguish between noisy and silent stops here, it
+     might be cleaner to have bpstat_print make that decision (also
+     taking into account stop_print_frame and source_only).  But the
+     implications are a bit scary (interaction with auto-displays, etc.),
+     so I won't try it.  */
+     
+  /* Stop silently.  */
+  BPSTAT_WHAT_STOP_SILENT,
+
+  /* Stop and print.  */
+  BPSTAT_WHAT_STOP_NOISY,
+
+  /* Remove breakpoints, single step once, then put them back in and
+     go back to what we were doing.  It's possible that this should be
+     removed from the main_action and put into a separate field, to more
+     cleanly handle BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE.  */
+  BPSTAT_WHAT_SINGLE,
+
+  /* Set longjmp_resume breakpoint, remove all other breakpoints,
+     and continue.  The "remove all other breakpoints" part is required
+     if we are also stepping over another breakpoint as well as doing
+     the longjmp handling.  */
+  BPSTAT_WHAT_SET_LONGJMP_RESUME,
+
+  /* Clear longjmp_resume breakpoint, then handle as
+     BPSTAT_WHAT_KEEP_CHECKING.  */
+  BPSTAT_WHAT_CLEAR_LONGJMP_RESUME,
+
+  /* Clear longjmp_resume breakpoint, then handle as BPSTAT_WHAT_SINGLE.  */
+  BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE,
+
+  /* Clear step resume breakpoint, and keep checking.  */
+  BPSTAT_WHAT_STEP_RESUME,
+
+  /* Clear through_sigtramp breakpoint, muck with trap_expected, and keep
+     checking.  */
+  BPSTAT_WHAT_THROUGH_SIGTRAMP,
+
+  /* Check the dynamic linker's data structures for new libraries, then
+     keep checking.  */
+  BPSTAT_WHAT_CHECK_SHLIBS,
+
+  /* Check the dynamic linker's data structures for new libraries, then
+     resume out of the dynamic linker's callback, stop and print.  */
+  BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK,
+
+  /* This is just used to keep track of how many enums there are.  */
+  BPSTAT_WHAT_LAST
+};
+
+struct bpstat_what {
+  enum bpstat_what_main_action main_action;
+
+  /* Did we hit a call dummy breakpoint?  This only goes with a main_action
+     of BPSTAT_WHAT_STOP_SILENT or BPSTAT_WHAT_STOP_NOISY (the concept of
+     continuing from a call dummy without popping the frame is not a
+     useful one).  */
+  int call_dummy;
+};
+
+/* Tell what to do about this bpstat.  */
+struct bpstat_what bpstat_what PARAMS ((bpstat));
+
+/* Find the bpstat associated with a breakpoint.  NULL otherwise. */
+bpstat bpstat_find_breakpoint PARAMS ((bpstat, struct breakpoint *));
+
+/* Find a step_resume breakpoint associated with this bpstat.
+   (If there are multiple step_resume bp's on the list, this function
+   will arbitrarily pick one.)
+
+   It is an error to use this function if BPSTAT doesn't contain a
+   step_resume breakpoint.
+
+   See wait_for_inferior's use of this function.
+   */
+extern struct breakpoint *
+bpstat_find_step_resume_breakpoint PARAMS ((bpstat));
+
+/* Nonzero if a signal that we got in wait() was due to circumstances
+   explained by the BS.  */
+/* Currently that is true if we have hit a breakpoint, or if there is
+   a watchpoint enabled.  */
+#define bpstat_explains_signal(bs) ((bs) != NULL)
+
+/* Nonzero if we should step constantly (e.g. watchpoints on machines
+   without hardware support).  This isn't related to a specific bpstat,
+   just to things like whether watchpoints are set.  */
+extern int bpstat_should_step PARAMS ((void));
+
+/* Nonzero if there are enabled hardware watchpoints. */
+extern int bpstat_have_active_hw_watchpoints PARAMS ((void));
+
+/* Print a message indicating what happened.  Returns nonzero to
+   say that only the source line should be printed after this (zero
+   return means print the frame as well as the source line).  */
+extern int bpstat_print PARAMS ((bpstat));
+
+/* Return the breakpoint number of the first breakpoint we are stopped
+   at.  *BSP upon return is a bpstat which points to the remaining
+   breakpoints stopped at (but which is not guaranteed to be good for
+   anything but further calls to bpstat_num).
+   Return 0 if passed a bpstat which does not indicate any breakpoints.  */
+extern int bpstat_num PARAMS ((bpstat *));
+
+/* Perform actions associated with having stopped at *BSP.  Actually, we just
+   use this for breakpoint commands.  Perhaps other actions will go here
+   later, but this is executed at a late time (from the command loop).  */
+extern void bpstat_do_actions PARAMS ((bpstat *));
+
+/* Modify BS so that the actions will not be performed.  */
+extern void bpstat_clear_actions PARAMS ((bpstat));
+
+/* Given a bpstat that records zero or more triggered eventpoints, this
+   function returns another bpstat which contains only the catchpoints
+   on that first list, if any.
+   */
+extern void bpstat_get_triggered_catchpoints PARAMS ((bpstat, bpstat *));
+ 
+/* Implementation:  */
+struct bpstats
+{
+  /* Linked list because there can be two breakpoints at the
+     same place, and a bpstat reflects the fact that both have been hit.  */
+  bpstat next;
+  /* Breakpoint that we are at.  */
+  struct breakpoint *breakpoint_at;
+  /* Commands left to be done.  */
+  struct command_line *commands;
+  /* Old value associated with a watchpoint.  */
+  value_ptr old_val;
+
+  /* Nonzero if this breakpoint tells us to print the frame.  */
+  char print;
+
+  /* Nonzero if this breakpoint tells us to stop.  */
+  char stop;
+
+  /* Function called by bpstat_print to print stuff associated with
+     this element of the bpstat chain.  Returns 0 or 1 just like
+     bpstat_print, or -1 if it can't deal with it.  */
+  int (*print_it) PARAMS((bpstat bs));
+};
+
+enum inf_context
+{
+  inf_starting,
+  inf_running,
+  inf_exited
+};
+
+
+/* Prototypes for breakpoint-related functions.  */
+
+#ifdef __STDC__		/* Forward declarations for prototypes */
+struct frame_info;
+#endif
+
+extern int breakpoint_here_p PARAMS ((CORE_ADDR));
+
+extern int breakpoint_inserted_here_p PARAMS ((CORE_ADDR));
+
+extern int frame_in_dummy PARAMS ((struct frame_info *));
+
+extern int breakpoint_thread_match PARAMS ((CORE_ADDR, int));
+
+extern void until_break_command PARAMS ((char *, int));
+
+extern void breakpoint_re_set PARAMS ((void));
+
+extern void breakpoint_re_set_thread PARAMS ((struct breakpoint *));
+
+extern int ep_is_exception_catchpoint PARAMS ((struct breakpoint *));
+
+extern struct breakpoint *set_momentary_breakpoint
+  PARAMS ((struct symtab_and_line, struct frame_info *, enum bptype));
+
+extern void set_ignore_count PARAMS ((int, int, int));
+
+extern void set_default_breakpoint PARAMS ((int, CORE_ADDR, struct symtab *, int));
+
+extern void mark_breakpoints_out PARAMS ((void));
+
+extern void breakpoint_init_inferior PARAMS ((enum inf_context));
+
+extern void delete_breakpoint PARAMS ((struct breakpoint *));
+
+extern void breakpoint_auto_delete PARAMS ((bpstat));
+
+extern void breakpoint_clear_ignore_counts PARAMS ((void));
+
+extern void break_command PARAMS ((char *, int));
+
+extern void tbreak_command PARAMS ((char *, int));
+
+extern int insert_breakpoints PARAMS ((void));
+
+extern int remove_breakpoints PARAMS ((void));
+
+/* This function can be used to physically insert eventpoints from the
+   specified traced inferior process, without modifying the breakpoint
+   package's state.  This can be useful for those targets which support
+   following the processes of a fork() or vfork() system call, when both
+   of the resulting two processes are to be followed.  */
+extern int reattach_breakpoints PARAMS ((int));
+
+/* This function can be used to update the breakpoint package's state
+   after an exec() system call has been executed.
+
+   This function causes the following:
+
+     - All eventpoints are marked "not inserted".
+     - All eventpoints with a symbolic address are reset such that
+       the symbolic address must be reevaluated before the eventpoints
+       can be reinserted.
+     - The solib breakpoints are explicitly removed from the breakpoint
+       list.
+     - A step-resume breakpoint, if any, is explicitly removed from the
+       breakpoint list.
+     - All eventpoints without a symbolic address are removed from the
+       breakpoint list. */
+extern void update_breakpoints_after_exec PARAMS ((void));
+
+/* This function can be used to physically remove hardware breakpoints
+   and watchpoints from the specified traced inferior process, without
+   modifying the breakpoint package's state.  This can be useful for
+   those targets which support following the processes of a fork() or
+   vfork() system call, when one of the resulting two processes is to
+   be detached and allowed to run free.
+ 
+   It is an error to use this function on the process whose id is
+   inferior_pid.  */
+extern int detach_breakpoints PARAMS ((int));
+ 
+extern void enable_longjmp_breakpoint PARAMS ((void));
+
+extern void disable_longjmp_breakpoint PARAMS ((void));
+
+extern void set_longjmp_resume_breakpoint PARAMS ((CORE_ADDR,
+						   struct frame_info *));
+/* These functions respectively disable or reenable all currently
+   enabled watchpoints.  When disabled, the watchpoints are marked
+   call_disabled.  When reenabled, they are marked enabled.
+
+   The intended client of these functions is infcmd.c\run_stack_dummy.
+
+   The inferior must be stopped, and all breakpoints removed, when
+   these functions are used.
+
+   The need for these functions is that on some targets (e.g., HP-UX),
+   gdb is unable to unwind through the dummy frame that is pushed as
+   part of the implementation of a call command.  Watchpoints can
+   cause the inferior to stop in places where this frame is visible,
+   and that can cause execution control to become very confused.
+
+   Note that if a user sets breakpoints in an interactively call
+   function, the call_disabled watchpoints will have been reenabled
+   when the first such breakpoint is reached.  However, on targets
+   that are unable to unwind through the call dummy frame, watches
+   of stack-based storage may then be deleted, because gdb will
+   believe that their watched storage is out of scope.  (Sigh.) */
+extern void
+disable_watchpoints_before_interactive_call_start PARAMS ((void));
+
+extern void
+enable_watchpoints_after_interactive_call_stop PARAMS ((void));
+
+ 
+extern void clear_breakpoint_hit_counts PARAMS ((void));
+
+/* The following are for displays, which aren't really breakpoints, but
+   here is as good a place as any for them.  */
+
+extern void disable_current_display PARAMS ((void));
+
+extern void do_displays PARAMS ((void));
+
+extern void disable_display PARAMS ((int));
+
+extern void clear_displays PARAMS ((void));
+
+extern void disable_breakpoint PARAMS ((struct breakpoint *));
+
+extern void enable_breakpoint PARAMS ((struct breakpoint *));
+
+extern void create_solib_event_breakpoint PARAMS ((CORE_ADDR));
+
+extern void remove_solib_event_breakpoints PARAMS ((void));
+
+extern void disable_breakpoints_in_shlibs PARAMS ((int silent));
+
+extern void re_enable_breakpoints_in_shlibs PARAMS ((void));
+
+extern void create_solib_load_event_breakpoint PARAMS ((char *, int, char *, char *));
+ 
+extern void create_solib_unload_event_breakpoint PARAMS ((char *, int, char *, char *));
+ 
+extern void create_fork_event_catchpoint PARAMS ((int, char *));
+ 
+extern void create_vfork_event_catchpoint PARAMS ((int, char *));
+
+extern void create_exec_event_catchpoint PARAMS ((int, char *));
+ 
+/* This function returns TRUE if ep is a catchpoint. */
+extern int ep_is_catchpoint PARAMS ((struct breakpoint *));
+ 
+/* This function returns TRUE if ep is a catchpoint of a
+   shared library (aka dynamically-linked library) event,
+   such as a library load or unload. */
+extern int ep_is_shlib_catchpoint PARAMS ((struct breakpoint *));
+ 
+extern struct breakpoint *set_breakpoint_sal PARAMS ((struct symtab_and_line));
+
+#endif /* !defined (BREAKPOINT_H) */
diff --git a/gdb/buildsym.c b/gdb/buildsym.c
new file mode 100644
index 0000000..24b64be
--- /dev/null
+++ b/gdb/buildsym.c
@@ -0,0 +1,1130 @@
+/* Support routines for building symbol tables in GDB's internal format.
+   Copyright 1986-1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module provides subroutines used for creating and adding to
+   the symbol table.  These routines are called from various symbol-
+   file-reading routines.
+
+   Routines to support specific debugging information formats (stabs,
+   DWARF, etc) belong somewhere else. */
+
+#include "defs.h"
+#include "bfd.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "symfile.h"		/* Needed for "struct complaint" */
+#include "objfiles.h"
+#include "gdbtypes.h"
+#include "complaints.h"
+#include "gdb_string.h"
+
+/* Ask buildsym.h to define the vars it normally declares `extern'.  */
+#define	EXTERN			/**/
+#include "buildsym.h"		/* Our own declarations */
+#undef	EXTERN
+
+/* For cleanup_undefined_types and finish_global_stabs (somewhat
+   questionable--see comment where we call them).  */
+
+#include "stabsread.h"
+
+/* List of free `struct pending' structures for reuse.  */
+
+static struct pending *free_pendings;
+
+/* Non-zero if symtab has line number info.  This prevents an
+   otherwise empty symtab from being tossed.  */
+
+static int have_line_numbers;
+
+static int compare_line_numbers (const void *ln1p, const void *ln2p);
+
+
+/* Initial sizes of data structures.  These are realloc'd larger if
+   needed, and realloc'd down to the size actually used, when
+   completed.  */
+
+#define	INITIAL_CONTEXT_STACK_SIZE	10
+#define	INITIAL_LINE_VECTOR_LENGTH	1000
+
+
+/* Complaints about the symbols we have encountered.  */
+
+struct complaint block_end_complaint =
+{"block end address less than block start address in %s (patched it)", 0, 0};
+
+struct complaint anon_block_end_complaint =
+{"block end address 0x%lx less than block start address 0x%lx (patched it)", 0, 0};
+
+struct complaint innerblock_complaint =
+{"inner block not inside outer block in %s", 0, 0};
+
+struct complaint innerblock_anon_complaint =
+{"inner block (0x%lx-0x%lx) not inside outer block (0x%lx-0x%lx)", 0, 0};
+
+struct complaint blockvector_complaint =
+{"block at 0x%lx out of order", 0, 0};
+
+/* maintain the lists of symbols and blocks */
+
+/* Add a symbol to one of the lists of symbols.  */
+
+void
+add_symbol_to_list (struct symbol *symbol, struct pending **listhead)
+{
+  register struct pending *link;
+
+  /* If this is an alias for another symbol, don't add it.  */
+  if (symbol->ginfo.name && symbol->ginfo.name[0] == '#')
+    return;
+
+  /* We keep PENDINGSIZE symbols in each link of the list. If we
+     don't have a link with room in it, add a new link.  */
+  if (*listhead == NULL || (*listhead)->nsyms == PENDINGSIZE)
+    {
+      if (free_pendings)
+	{
+	  link = free_pendings;
+	  free_pendings = link->next;
+	}
+      else
+	{
+	  link = (struct pending *) xmalloc (sizeof (struct pending));
+	}
+
+      link->next = *listhead;
+      *listhead = link;
+      link->nsyms = 0;
+    }
+
+  (*listhead)->symbol[(*listhead)->nsyms++] = symbol;
+}
+
+/* Find a symbol named NAME on a LIST.  NAME need not be
+   '\0'-terminated; LENGTH is the length of the name.  */
+
+struct symbol *
+find_symbol_in_list (struct pending *list, char *name, int length)
+{
+  int j;
+  char *pp;
+
+  while (list != NULL)
+    {
+      for (j = list->nsyms; --j >= 0;)
+	{
+	  pp = SYMBOL_NAME (list->symbol[j]);
+	  if (*pp == *name && strncmp (pp, name, length) == 0 &&
+	      pp[length] == '\0')
+	    {
+	      return (list->symbol[j]);
+	    }
+	}
+      list = list->next;
+    }
+  return (NULL);
+}
+
+/* At end of reading syms, or in case of quit, really free as many
+   `struct pending's as we can easily find. */
+
+/* ARGSUSED */
+void
+really_free_pendings (int foo)
+{
+  struct pending *next, *next1;
+
+  for (next = free_pendings; next; next = next1)
+    {
+      next1 = next->next;
+      free ((void *) next);
+    }
+  free_pendings = NULL;
+
+  free_pending_blocks ();
+
+  for (next = file_symbols; next != NULL; next = next1)
+    {
+      next1 = next->next;
+      free ((void *) next);
+    }
+  file_symbols = NULL;
+
+  for (next = global_symbols; next != NULL; next = next1)
+    {
+      next1 = next->next;
+      free ((void *) next);
+    }
+  global_symbols = NULL;
+}
+
+/* This function is called to discard any pending blocks. */
+
+void
+free_pending_blocks (void)
+{
+#if 0				/* Now we make the links in the
+				   symbol_obstack, so don't free
+				   them.  */
+  struct pending_block *bnext, *bnext1;
+
+  for (bnext = pending_blocks; bnext; bnext = bnext1)
+    {
+      bnext1 = bnext->next;
+      free ((void *) bnext);
+    }
+#endif
+  pending_blocks = NULL;
+}
+
+/* Take one of the lists of symbols and make a block from it.  Keep
+   the order the symbols have in the list (reversed from the input
+   file).  Put the block on the list of pending blocks.  */
+
+void
+finish_block (struct symbol *symbol, struct pending **listhead,
+	      struct pending_block *old_blocks,
+	      CORE_ADDR start, CORE_ADDR end,
+	      struct objfile *objfile)
+{
+  register struct pending *next, *next1;
+  register struct block *block;
+  register struct pending_block *pblock;
+  struct pending_block *opblock;
+  register int i;
+  register int j;
+
+  /* Count the length of the list of symbols.  */
+
+  for (next = *listhead, i = 0;
+       next;
+       i += next->nsyms, next = next->next)
+    {
+      /* EMPTY */ ;
+    }
+
+  block = (struct block *) obstack_alloc (&objfile->symbol_obstack,
+    (sizeof (struct block) + ((i - 1) * sizeof (struct symbol *))));
+
+  /* Copy the symbols into the block.  */
+
+  BLOCK_NSYMS (block) = i;
+  for (next = *listhead; next; next = next->next)
+    {
+      for (j = next->nsyms - 1; j >= 0; j--)
+	{
+	  BLOCK_SYM (block, --i) = next->symbol[j];
+	}
+    }
+
+  BLOCK_START (block) = start;
+  BLOCK_END (block) = end;
+  /* Superblock filled in when containing block is made */
+  BLOCK_SUPERBLOCK (block) = NULL;
+
+  BLOCK_GCC_COMPILED (block) = processing_gcc_compilation;
+
+  /* Put the block in as the value of the symbol that names it.  */
+
+  if (symbol)
+    {
+      struct type *ftype = SYMBOL_TYPE (symbol);
+      SYMBOL_BLOCK_VALUE (symbol) = block;
+      BLOCK_FUNCTION (block) = symbol;
+
+      if (TYPE_NFIELDS (ftype) <= 0)
+	{
+	  /* No parameter type information is recorded with the
+	     function's type.  Set that from the type of the
+	     parameter symbols. */
+	  int nparams = 0, iparams;
+	  struct symbol *sym;
+	  for (i = 0; i < BLOCK_NSYMS (block); i++)
+	    {
+	      sym = BLOCK_SYM (block, i);
+	      switch (SYMBOL_CLASS (sym))
+		{
+		case LOC_ARG:
+		case LOC_REF_ARG:
+		case LOC_REGPARM:
+		case LOC_REGPARM_ADDR:
+		case LOC_BASEREG_ARG:
+		case LOC_LOCAL_ARG:
+		  nparams++;
+		  break;
+		case LOC_UNDEF:
+		case LOC_CONST:
+		case LOC_STATIC:
+		case LOC_INDIRECT:
+		case LOC_REGISTER:
+		case LOC_LOCAL:
+		case LOC_TYPEDEF:
+		case LOC_LABEL:
+		case LOC_BLOCK:
+		case LOC_CONST_BYTES:
+		case LOC_BASEREG:
+		case LOC_UNRESOLVED:
+		case LOC_OPTIMIZED_OUT:
+		default:
+		  break;
+		}
+	    }
+	  if (nparams > 0)
+	    {
+	      TYPE_NFIELDS (ftype) = nparams;
+	      TYPE_FIELDS (ftype) = (struct field *)
+		TYPE_ALLOC (ftype, nparams * sizeof (struct field));
+
+	      for (i = iparams = 0; iparams < nparams; i++)
+		{
+		  sym = BLOCK_SYM (block, i);
+		  switch (SYMBOL_CLASS (sym))
+		    {
+		    case LOC_ARG:
+		    case LOC_REF_ARG:
+		    case LOC_REGPARM:
+		    case LOC_REGPARM_ADDR:
+		    case LOC_BASEREG_ARG:
+		    case LOC_LOCAL_ARG:
+		      TYPE_FIELD_TYPE (ftype, iparams) = SYMBOL_TYPE (sym);
+		      iparams++;
+		      break;
+		    case LOC_UNDEF:
+		    case LOC_CONST:
+		    case LOC_STATIC:
+		    case LOC_INDIRECT:
+		    case LOC_REGISTER:
+		    case LOC_LOCAL:
+		    case LOC_TYPEDEF:
+		    case LOC_LABEL:
+		    case LOC_BLOCK:
+		    case LOC_CONST_BYTES:
+		    case LOC_BASEREG:
+		    case LOC_UNRESOLVED:
+		    case LOC_OPTIMIZED_OUT:
+		    default:
+		      break;
+		    }
+		}
+	    }
+	}
+    }
+  else
+    {
+      BLOCK_FUNCTION (block) = NULL;
+    }
+
+  /* Now "free" the links of the list, and empty the list.  */
+
+  for (next = *listhead; next; next = next1)
+    {
+      next1 = next->next;
+      next->next = free_pendings;
+      free_pendings = next;
+    }
+  *listhead = NULL;
+
+#if 1
+  /* Check to be sure that the blocks have an end address that is
+     greater than starting address */
+
+  if (BLOCK_END (block) < BLOCK_START (block))
+    {
+      if (symbol)
+	{
+	  complain (&block_end_complaint, SYMBOL_SOURCE_NAME (symbol));
+	}
+      else
+	{
+	  complain (&anon_block_end_complaint, BLOCK_END (block), BLOCK_START (block));
+	}
+      /* Better than nothing */
+      BLOCK_END (block) = BLOCK_START (block);
+    }
+#endif
+
+  /* Install this block as the superblock of all blocks made since the
+     start of this scope that don't have superblocks yet.  */
+
+  opblock = NULL;
+  for (pblock = pending_blocks; pblock != old_blocks; pblock = pblock->next)
+    {
+      if (BLOCK_SUPERBLOCK (pblock->block) == NULL)
+	{
+#if 1
+	  /* Check to be sure the blocks are nested as we receive
+	     them. If the compiler/assembler/linker work, this just
+	     burns a small amount of time.  */
+	  if (BLOCK_START (pblock->block) < BLOCK_START (block) ||
+	      BLOCK_END (pblock->block) > BLOCK_END (block))
+	    {
+	      if (symbol)
+		{
+		  complain (&innerblock_complaint,
+			    SYMBOL_SOURCE_NAME (symbol));
+		}
+	      else
+		{
+		  complain (&innerblock_anon_complaint, BLOCK_START (pblock->block),
+		     BLOCK_END (pblock->block), BLOCK_START (block),
+			    BLOCK_END (block));
+		}
+	      if (BLOCK_START (pblock->block) < BLOCK_START (block))
+		BLOCK_START (pblock->block) = BLOCK_START (block);
+	      if (BLOCK_END (pblock->block) > BLOCK_END (block))
+		BLOCK_END (pblock->block) = BLOCK_END (block);
+	    }
+#endif
+	  BLOCK_SUPERBLOCK (pblock->block) = block;
+	}
+      opblock = pblock;
+    }
+
+  record_pending_block (objfile, block, opblock);
+}
+
+/* Record BLOCK on the list of all blocks in the file.  Put it after
+   OPBLOCK, or at the beginning if opblock is NULL.  This puts the
+   block in the list after all its subblocks.
+
+   Allocate the pending block struct in the symbol_obstack to save
+   time.  This wastes a little space.  FIXME: Is it worth it?  */
+
+void
+record_pending_block (struct objfile *objfile, struct block *block,
+		      struct pending_block *opblock)
+{
+  register struct pending_block *pblock;
+
+  pblock = (struct pending_block *)
+    obstack_alloc (&objfile->symbol_obstack, sizeof (struct pending_block));
+  pblock->block = block;
+  if (opblock)
+    {
+      pblock->next = opblock->next;
+      opblock->next = pblock;
+    }
+  else
+    {
+      pblock->next = pending_blocks;
+      pending_blocks = pblock;
+    }
+}
+
+/* Note that this is only used in this file and in dstread.c, which
+   should be fixed to not need direct access to this function.  When
+   that is done, it can be made static again. */
+
+struct blockvector *
+make_blockvector (struct objfile *objfile)
+{
+  register struct pending_block *next;
+  register struct blockvector *blockvector;
+  register int i;
+
+  /* Count the length of the list of blocks.  */
+
+  for (next = pending_blocks, i = 0; next; next = next->next, i++)
+    {;
+    }
+
+  blockvector = (struct blockvector *)
+    obstack_alloc (&objfile->symbol_obstack,
+		   (sizeof (struct blockvector)
+		    + (i - 1) * sizeof (struct block *)));
+
+  /* Copy the blocks into the blockvector. This is done in reverse
+     order, which happens to put the blocks into the proper order
+     (ascending starting address). finish_block has hair to insert
+     each block into the list after its subblocks in order to make
+     sure this is true.  */
+
+  BLOCKVECTOR_NBLOCKS (blockvector) = i;
+  for (next = pending_blocks; next; next = next->next)
+    {
+      BLOCKVECTOR_BLOCK (blockvector, --i) = next->block;
+    }
+
+#if 0				/* Now we make the links in the
+				   obstack, so don't free them.  */
+  /* Now free the links of the list, and empty the list.  */
+
+  for (next = pending_blocks; next; next = next1)
+    {
+      next1 = next->next;
+      free (next);
+    }
+#endif
+  pending_blocks = NULL;
+
+#if 1				/* FIXME, shut this off after a while
+				   to speed up symbol reading.  */
+  /* Some compilers output blocks in the wrong order, but we depend on
+     their being in the right order so we can binary search. Check the
+     order and moan about it.  FIXME.  */
+  if (BLOCKVECTOR_NBLOCKS (blockvector) > 1)
+    {
+      for (i = 1; i < BLOCKVECTOR_NBLOCKS (blockvector); i++)
+	{
+	  if (BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i - 1))
+	      > BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i)))
+	    {
+
+	      /* FIXME-32x64: loses if CORE_ADDR doesn't fit in a
+	         long.  Possible solutions include a version of
+	         complain which takes a callback, a
+	         sprintf_address_numeric to match
+	         print_address_numeric, or a way to set up a GDB_FILE
+	         which causes sprintf rather than fprintf to be
+	         called.  */
+
+	      complain (&blockvector_complaint,
+			(unsigned long) BLOCK_START (BLOCKVECTOR_BLOCK (blockvector, i)));
+	    }
+	}
+    }
+#endif
+
+  return (blockvector);
+}
+
+/* Start recording information about source code that came from an
+   included (or otherwise merged-in) source file with a different
+   name.  NAME is the name of the file (cannot be NULL), DIRNAME is
+   the directory in which it resides (or NULL if not known).  */
+
+void
+start_subfile (char *name, char *dirname)
+{
+  register struct subfile *subfile;
+
+  /* See if this subfile is already known as a subfile of the current
+     main source file.  */
+
+  for (subfile = subfiles; subfile; subfile = subfile->next)
+    {
+      if (STREQ (subfile->name, name))
+	{
+	  current_subfile = subfile;
+	  return;
+	}
+    }
+
+  /* This subfile is not known.  Add an entry for it. Make an entry
+     for this subfile in the list of all subfiles of the current main
+     source file.  */
+
+  subfile = (struct subfile *) xmalloc (sizeof (struct subfile));
+  subfile->next = subfiles;
+  subfiles = subfile;
+  current_subfile = subfile;
+
+  /* Save its name and compilation directory name */
+  subfile->name = (name == NULL) ? NULL : savestring (name, strlen (name));
+  subfile->dirname =
+    (dirname == NULL) ? NULL : savestring (dirname, strlen (dirname));
+
+  /* Initialize line-number recording for this subfile.  */
+  subfile->line_vector = NULL;
+
+  /* Default the source language to whatever can be deduced from the
+     filename.  If nothing can be deduced (such as for a C/C++ include
+     file with a ".h" extension), then inherit whatever language the
+     previous subfile had.  This kludgery is necessary because there
+     is no standard way in some object formats to record the source
+     language.  Also, when symtabs are allocated we try to deduce a
+     language then as well, but it is too late for us to use that
+     information while reading symbols, since symtabs aren't allocated
+     until after all the symbols have been processed for a given
+     source file. */
+
+  subfile->language = deduce_language_from_filename (subfile->name);
+  if (subfile->language == language_unknown &&
+      subfile->next != NULL)
+    {
+      subfile->language = subfile->next->language;
+    }
+
+  /* Initialize the debug format string to NULL.  We may supply it
+     later via a call to record_debugformat. */
+  subfile->debugformat = NULL;
+
+  /* cfront output is a C program, so in most ways it looks like a C
+     program.  But to demangle we need to set the language to C++.  We
+     can distinguish cfront code by the fact that it has #line
+     directives which specify a file name ending in .C.
+  
+     So if the filename of this subfile ends in .C, then change the
+     language of any pending subfiles from C to C++.  We also accept
+     any other C++ suffixes accepted by deduce_language_from_filename
+     (in particular, some people use .cxx with cfront).  */
+  /* Likewise for f2c.  */
+
+  if (subfile->name)
+    {
+      struct subfile *s;
+      enum language sublang = deduce_language_from_filename (subfile->name);
+
+      if (sublang == language_cplus || sublang == language_fortran)
+	for (s = subfiles; s != NULL; s = s->next)
+	  if (s->language == language_c)
+	    s->language = sublang;
+    }
+
+  /* And patch up this file if necessary.  */
+  if (subfile->language == language_c
+      && subfile->next != NULL
+      && (subfile->next->language == language_cplus
+	  || subfile->next->language == language_fortran))
+    {
+      subfile->language = subfile->next->language;
+    }
+}
+
+/* For stabs readers, the first N_SO symbol is assumed to be the
+   source file name, and the subfile struct is initialized using that
+   assumption.  If another N_SO symbol is later seen, immediately
+   following the first one, then the first one is assumed to be the
+   directory name and the second one is really the source file name.
+
+   So we have to patch up the subfile struct by moving the old name
+   value to dirname and remembering the new name.  Some sanity
+   checking is performed to ensure that the state of the subfile
+   struct is reasonable and that the old name we are assuming to be a
+   directory name actually is (by checking for a trailing '/'). */
+
+void
+patch_subfile_names (struct subfile *subfile, char *name)
+{
+  if (subfile != NULL && subfile->dirname == NULL && subfile->name != NULL
+      && subfile->name[strlen (subfile->name) - 1] == '/')
+    {
+      subfile->dirname = subfile->name;
+      subfile->name = savestring (name, strlen (name));
+      last_source_file = name;
+
+      /* Default the source language to whatever can be deduced from
+         the filename.  If nothing can be deduced (such as for a C/C++
+         include file with a ".h" extension), then inherit whatever
+         language the previous subfile had.  This kludgery is
+         necessary because there is no standard way in some object
+         formats to record the source language.  Also, when symtabs
+         are allocated we try to deduce a language then as well, but
+         it is too late for us to use that information while reading
+         symbols, since symtabs aren't allocated until after all the
+         symbols have been processed for a given source file. */
+
+      subfile->language = deduce_language_from_filename (subfile->name);
+      if (subfile->language == language_unknown &&
+	  subfile->next != NULL)
+	{
+	  subfile->language = subfile->next->language;
+	}
+    }
+}
+
+/* Handle the N_BINCL and N_EINCL symbol types that act like N_SOL for
+   switching source files (different subfiles, as we call them) within
+   one object file, but using a stack rather than in an arbitrary
+   order.  */
+
+void
+push_subfile (void)
+{
+  register struct subfile_stack *tem
+  = (struct subfile_stack *) xmalloc (sizeof (struct subfile_stack));
+
+  tem->next = subfile_stack;
+  subfile_stack = tem;
+  if (current_subfile == NULL || current_subfile->name == NULL)
+    {
+      abort ();
+    }
+  tem->name = current_subfile->name;
+}
+
+char *
+pop_subfile (void)
+{
+  register char *name;
+  register struct subfile_stack *link = subfile_stack;
+
+  if (link == NULL)
+    {
+      abort ();
+    }
+  name = link->name;
+  subfile_stack = link->next;
+  free ((void *) link);
+  return (name);
+}
+
+/* Add a linetable entry for line number LINE and address PC to the
+   line vector for SUBFILE.  */
+
+void
+record_line (register struct subfile *subfile, int line, CORE_ADDR pc)
+{
+  struct linetable_entry *e;
+  /* Ignore the dummy line number in libg.o */
+
+  if (line == 0xffff)
+    {
+      return;
+    }
+
+  /* Make sure line vector exists and is big enough.  */
+  if (!subfile->line_vector)
+    {
+      subfile->line_vector_length = INITIAL_LINE_VECTOR_LENGTH;
+      subfile->line_vector = (struct linetable *)
+	xmalloc (sizeof (struct linetable)
+		 + subfile->line_vector_length * sizeof (struct linetable_entry));
+      subfile->line_vector->nitems = 0;
+      have_line_numbers = 1;
+    }
+
+  if (subfile->line_vector->nitems + 1 >= subfile->line_vector_length)
+    {
+      subfile->line_vector_length *= 2;
+      subfile->line_vector = (struct linetable *)
+	xrealloc ((char *) subfile->line_vector,
+		  (sizeof (struct linetable)
+		   + (subfile->line_vector_length
+		      * sizeof (struct linetable_entry))));
+    }
+
+  e = subfile->line_vector->item + subfile->line_vector->nitems++;
+  e->line = line;
+  e->pc = pc;
+}
+
+/* Needed in order to sort line tables from IBM xcoff files.  Sigh!  */
+
+static int
+compare_line_numbers (const void *ln1p, const void *ln2p)
+{
+  struct linetable_entry *ln1 = (struct linetable_entry *) ln1p;
+  struct linetable_entry *ln2 = (struct linetable_entry *) ln2p;
+
+  /* Note: this code does not assume that CORE_ADDRs can fit in ints.
+     Please keep it that way.  */
+  if (ln1->pc < ln2->pc)
+    return -1;
+
+  if (ln1->pc > ln2->pc)
+    return 1;
+
+  /* If pc equal, sort by line.  I'm not sure whether this is optimum
+     behavior (see comment at struct linetable in symtab.h).  */
+  return ln1->line - ln2->line;
+}
+
+/* Start a new symtab for a new source file.  Called, for example,
+   when a stabs symbol of type N_SO is seen, or when a DWARF
+   TAG_compile_unit DIE is seen.  It indicates the start of data for
+   one original source file.  */
+
+void
+start_symtab (char *name, char *dirname, CORE_ADDR start_addr)
+{
+
+  last_source_file = name;
+  last_source_start_addr = start_addr;
+  file_symbols = NULL;
+  global_symbols = NULL;
+  within_function = 0;
+  have_line_numbers = 0;
+
+  /* Context stack is initially empty.  Allocate first one with room
+     for 10 levels; reuse it forever afterward.  */
+  if (context_stack == NULL)
+    {
+      context_stack_size = INITIAL_CONTEXT_STACK_SIZE;
+      context_stack = (struct context_stack *)
+	xmalloc (context_stack_size * sizeof (struct context_stack));
+    }
+  context_stack_depth = 0;
+
+  /* Initialize the list of sub source files with one entry for this
+     file (the top-level source file).  */
+
+  subfiles = NULL;
+  current_subfile = NULL;
+  start_subfile (name, dirname);
+}
+
+/* Finish the symbol definitions for one main source file, close off
+   all the lexical contexts for that file (creating struct block's for
+   them), then make the struct symtab for that file and put it in the
+   list of all such.
+
+   END_ADDR is the address of the end of the file's text.  SECTION is
+   the section number (in objfile->section_offsets) of the blockvector
+   and linetable.
+
+   Note that it is possible for end_symtab() to return NULL.  In
+   particular, for the DWARF case at least, it will return NULL when
+   it finds a compilation unit that has exactly one DIE, a
+   TAG_compile_unit DIE.  This can happen when we link in an object
+   file that was compiled from an empty source file.  Returning NULL
+   is probably not the correct thing to do, because then gdb will
+   never know about this empty file (FIXME). */
+
+struct symtab *
+end_symtab (CORE_ADDR end_addr, struct objfile *objfile, int section)
+{
+  register struct symtab *symtab = NULL;
+  register struct blockvector *blockvector;
+  register struct subfile *subfile;
+  register struct context_stack *cstk;
+  struct subfile *nextsub;
+
+  /* Finish the lexical context of the last function in the file; pop
+     the context stack.  */
+
+  if (context_stack_depth > 0)
+    {
+      cstk = pop_context ();
+      /* Make a block for the local symbols within.  */
+      finish_block (cstk->name, &local_symbols, cstk->old_blocks,
+		    cstk->start_addr, end_addr, objfile);
+
+      if (context_stack_depth > 0)
+	{
+	  /* This is said to happen with SCO.  The old coffread.c
+	     code simply emptied the context stack, so we do the
+	     same.  FIXME: Find out why it is happening.  This is not
+	     believed to happen in most cases (even for coffread.c);
+	     it used to be an abort().  */
+	  static struct complaint msg =
+	  {"Context stack not empty in end_symtab", 0, 0};
+	  complain (&msg);
+	  context_stack_depth = 0;
+	}
+    }
+
+  /* Reordered executables may have out of order pending blocks; if
+     OBJF_REORDERED is true, then sort the pending blocks.  */
+  if ((objfile->flags & OBJF_REORDERED) && pending_blocks)
+    {
+      /* FIXME!  Remove this horrid bubble sort and use merge sort!!! */
+      int swapped;
+      do
+	{
+	  struct pending_block *pb, *pbnext;
+
+	  pb = pending_blocks;
+	  pbnext = pb->next;
+	  swapped = 0;
+
+	  while (pbnext)
+	    {
+	      /* swap blocks if unordered! */
+
+	      if (BLOCK_START (pb->block) < BLOCK_START (pbnext->block))
+		{
+		  struct block *tmp = pb->block;
+		  pb->block = pbnext->block;
+		  pbnext->block = tmp;
+		  swapped = 1;
+		}
+	      pb = pbnext;
+	      pbnext = pbnext->next;
+	    }
+	}
+      while (swapped);
+    }
+
+  /* Cleanup any undefined types that have been left hanging around
+     (this needs to be done before the finish_blocks so that
+     file_symbols is still good).
+  
+     Both cleanup_undefined_types and finish_global_stabs are stabs
+     specific, but harmless for other symbol readers, since on gdb
+     startup or when finished reading stabs, the state is set so these
+     are no-ops.  FIXME: Is this handled right in case of QUIT?  Can
+     we make this cleaner?  */
+
+  cleanup_undefined_types ();
+  finish_global_stabs (objfile);
+
+  if (pending_blocks == NULL
+      && file_symbols == NULL
+      && global_symbols == NULL
+      && have_line_numbers == 0)
+    {
+      /* Ignore symtabs that have no functions with real debugging
+         info.  */
+      blockvector = NULL;
+    }
+  else
+    {
+      /* Define the STATIC_BLOCK & GLOBAL_BLOCK, and build the
+         blockvector.  */
+      finish_block (0, &file_symbols, 0, last_source_start_addr, end_addr,
+		    objfile);
+      finish_block (0, &global_symbols, 0, last_source_start_addr, end_addr,
+		    objfile);
+      blockvector = make_blockvector (objfile);
+    }
+
+#ifndef PROCESS_LINENUMBER_HOOK
+#define PROCESS_LINENUMBER_HOOK()
+#endif
+  PROCESS_LINENUMBER_HOOK ();	/* Needed for xcoff. */
+
+  /* Now create the symtab objects proper, one for each subfile.  */
+  /* (The main file is the last one on the chain.)  */
+
+  for (subfile = subfiles; subfile; subfile = nextsub)
+    {
+      int linetablesize = 0;
+      symtab = NULL;
+
+      /* If we have blocks of symbols, make a symtab. Otherwise, just
+         ignore this file and any line number info in it.  */
+      if (blockvector)
+	{
+	  if (subfile->line_vector)
+	    {
+	      linetablesize = sizeof (struct linetable) +
+	        subfile->line_vector->nitems * sizeof (struct linetable_entry);
+#if 0
+	      /* I think this is artifact from before it went on the
+	         obstack. I doubt we'll need the memory between now
+	         and when we free it later in this function.  */
+	      /* First, shrink the linetable to make more memory.  */
+	      subfile->line_vector = (struct linetable *)
+		xrealloc ((char *) subfile->line_vector, linetablesize);
+#endif
+
+	      /* Like the pending blocks, the line table may be
+	         scrambled in reordered executables.  Sort it if
+	         OBJF_REORDERED is true.  */
+	      if (objfile->flags & OBJF_REORDERED)
+		qsort (subfile->line_vector->item,
+		       subfile->line_vector->nitems,
+		       sizeof (struct linetable_entry), compare_line_numbers);
+	    }
+
+	  /* Now, allocate a symbol table.  */
+	  symtab = allocate_symtab (subfile->name, objfile);
+
+	  /* Fill in its components.  */
+	  symtab->blockvector = blockvector;
+	  if (subfile->line_vector)
+	    {
+	      /* Reallocate the line table on the symbol obstack */
+	      symtab->linetable = (struct linetable *)
+		obstack_alloc (&objfile->symbol_obstack, linetablesize);
+	      memcpy (symtab->linetable, subfile->line_vector, linetablesize);
+	    }
+	  else
+	    {
+	      symtab->linetable = NULL;
+	    }
+	  symtab->block_line_section = section;
+	  if (subfile->dirname)
+	    {
+	      /* Reallocate the dirname on the symbol obstack */
+	      symtab->dirname = (char *)
+		obstack_alloc (&objfile->symbol_obstack,
+			       strlen (subfile->dirname) + 1);
+	      strcpy (symtab->dirname, subfile->dirname);
+	    }
+	  else
+	    {
+	      symtab->dirname = NULL;
+	    }
+	  symtab->free_code = free_linetable;
+	  symtab->free_ptr = NULL;
+
+	  /* Use whatever language we have been using for this
+	     subfile, not the one that was deduced in allocate_symtab
+	     from the filename.  We already did our own deducing when
+	     we created the subfile, and we may have altered our
+	     opinion of what language it is from things we found in
+	     the symbols. */
+	  symtab->language = subfile->language;
+
+	  /* Save the debug format string (if any) in the symtab */
+	  if (subfile->debugformat != NULL)
+	    {
+	      symtab->debugformat = obsavestring (subfile->debugformat,
+				      strlen (subfile->debugformat),
+					  &objfile->symbol_obstack);
+	    }
+
+	  /* All symtabs for the main file and the subfiles share a
+	     blockvector, so we need to clear primary for everything
+	     but the main file.  */
+
+	  symtab->primary = 0;
+	}
+      if (subfile->name != NULL)
+	{
+	  free ((void *) subfile->name);
+	}
+      if (subfile->dirname != NULL)
+	{
+	  free ((void *) subfile->dirname);
+	}
+      if (subfile->line_vector != NULL)
+	{
+	  free ((void *) subfile->line_vector);
+	}
+      if (subfile->debugformat != NULL)
+	{
+	  free ((void *) subfile->debugformat);
+	}
+
+      nextsub = subfile->next;
+      free ((void *) subfile);
+    }
+
+  /* Set this for the main source file.  */
+  if (symtab)
+    {
+      symtab->primary = 1;
+    }
+
+  last_source_file = NULL;
+  current_subfile = NULL;
+
+  return symtab;
+}
+
+/* Push a context block.  Args are an identifying nesting level
+   (checkable when you pop it), and the starting PC address of this
+   context.  */
+
+struct context_stack *
+push_context (int desc, CORE_ADDR valu)
+{
+  register struct context_stack *new;
+
+  if (context_stack_depth == context_stack_size)
+    {
+      context_stack_size *= 2;
+      context_stack = (struct context_stack *)
+	xrealloc ((char *) context_stack,
+	      (context_stack_size * sizeof (struct context_stack)));
+    }
+
+  new = &context_stack[context_stack_depth++];
+  new->depth = desc;
+  new->locals = local_symbols;
+  new->params = param_symbols;
+  new->old_blocks = pending_blocks;
+  new->start_addr = valu;
+  new->name = NULL;
+
+  local_symbols = NULL;
+  param_symbols = NULL;
+
+  return new;
+}
+
+/* Compute a small integer hash code for the given name. */
+
+int
+hashname (char *name)
+{
+  register char *p = name;
+  register int total = p[0];
+  register int c;
+
+  c = p[1];
+  total += c << 2;
+  if (c)
+    {
+      c = p[2];
+      total += c << 4;
+      if (c)
+	{
+	  total += p[3] << 6;
+	}
+    }
+
+  /* Ensure result is positive.  */
+  if (total < 0)
+    {
+      total += (1000 << 6);
+    }
+  return (total % HASHSIZE);
+}
+
+
+void
+record_debugformat (char *format)
+{
+  current_subfile->debugformat = savestring (format, strlen (format));
+}
+
+/* Merge the first symbol list SRCLIST into the second symbol list
+   TARGETLIST by repeated calls to add_symbol_to_list().  This
+   procedure "frees" each link of SRCLIST by adding it to the
+   free_pendings list.  Caller must set SRCLIST to a null list after
+   calling this function.
+
+   Void return. */
+
+void
+merge_symbol_lists (struct pending **srclist, struct pending **targetlist)
+{
+  register int i;
+
+  if (!srclist || !*srclist)
+    return;
+
+  /* Merge in elements from current link.  */
+  for (i = 0; i < (*srclist)->nsyms; i++)
+    add_symbol_to_list ((*srclist)->symbol[i], targetlist);
+
+  /* Recurse on next.  */
+  merge_symbol_lists (&(*srclist)->next, targetlist);
+
+  /* "Free" the current link.  */
+  (*srclist)->next = free_pendings;
+  free_pendings = (*srclist);
+}
+
+/* Initialize anything that needs initializing when starting to read a
+   fresh piece of a symbol file, e.g. reading in the stuff
+   corresponding to a psymtab.  */
+
+void
+buildsym_init ()
+{
+  free_pendings = NULL;
+  file_symbols = NULL;
+  global_symbols = NULL;
+  pending_blocks = NULL;
+}
+
+/* Initialize anything that needs initializing when a completely new
+   symbol file is specified (not just adding some symbols from another
+   file, e.g. a shared library).  */
+
+void
+buildsym_new_init ()
+{
+  buildsym_init ();
+}
diff --git a/gdb/buildsym.h b/gdb/buildsym.h
new file mode 100644
index 0000000..e3a34c9
--- /dev/null
+++ b/gdb/buildsym.h
@@ -0,0 +1,297 @@
+/* Build symbol tables in GDB's internal format.
+   Copyright 1986-1993, 1996-1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (BUILDSYM_H)
+#define BUILDSYM_H 1
+
+/* This module provides definitions used for creating and adding to
+   the symbol table.  These routines are called from various symbol-
+   file-reading routines.
+
+   They originated in dbxread.c of gdb-4.2, and were split out to
+   make xcoffread.c more maintainable by sharing code.
+
+   Variables declared in this file can be defined by #define-ing the
+   name EXTERN to null.  It is used to declare variables that are
+   normally extern, but which get defined in a single module using
+   this technique.  */
+
+#ifndef EXTERN
+#define	EXTERN extern
+#endif
+
+#define HASHSIZE 127		/* Size of things hashed via
+				   hashname() */
+
+/* Name of source file whose symbol data we are now processing.  This
+   comes from a symbol of type N_SO. */
+
+EXTERN char *last_source_file;
+
+/* Core address of start of text of current source file.  This too
+   comes from the N_SO symbol. */
+
+EXTERN CORE_ADDR last_source_start_addr;
+
+/* The list of sub-source-files within the current individual
+   compilation.  Each file gets its own symtab with its own linetable
+   and associated info, but they all share one blockvector.  */
+
+struct subfile
+  {
+    struct subfile *next;
+    char *name;
+    char *dirname;
+    struct linetable *line_vector;
+    int line_vector_length;
+    enum language language;
+    char *debugformat;
+  };
+
+EXTERN struct subfile *subfiles;
+
+EXTERN struct subfile *current_subfile;
+
+/* Global variable which, when set, indicates that we are processing a
+   .o file compiled with gcc */
+
+EXTERN unsigned char processing_gcc_compilation;
+
+/* When set, we are processing a .o file compiled by sun acc.  This is
+   misnamed; it refers to all stabs-in-elf implementations which use
+   N_UNDF the way Sun does, including Solaris gcc.  Hopefully all
+   stabs-in-elf implementations ever invented will choose to be
+   compatible.  */
+
+EXTERN unsigned char processing_acc_compilation;
+
+/* elz: added this flag to know when a block is compiled with HP
+   compilers (cc, aCC). This is necessary because of the macro
+   COERCE_FLOAT_TO_DOUBLE defined in tm_hppa.h, which causes a
+   coercion of float to double to always occur in parameter passing
+   for a function called by gdb (see the function value_arg_coerce in
+   valops.c). This is necessary only if the target was compiled with
+   gcc, not with HP compilers or with g++ */
+
+EXTERN unsigned char processing_hp_compilation;
+
+/* Count symbols as they are processed, for error messages.  */
+
+EXTERN unsigned int symnum;
+
+/* Record the symbols defined for each context in a list.  We don't
+   create a struct block for the context until we know how long to
+   make it.  */
+
+#define PENDINGSIZE 100
+
+struct pending
+  {
+    struct pending *next;
+    int nsyms;
+    struct symbol *symbol[PENDINGSIZE];
+  };
+
+/* Here are the three lists that symbols are put on.  */
+
+/* static at top level, and types */
+
+EXTERN struct pending *file_symbols;
+
+/* global functions and variables */
+
+EXTERN struct pending *global_symbols;
+
+/* everything local to lexical context */
+
+EXTERN struct pending *local_symbols;
+
+/* func params local to lexical  context */
+
+EXTERN struct pending *param_symbols;
+
+/* Stack representing unclosed lexical contexts (that will become
+   blocks, eventually).  */
+
+struct context_stack
+  {
+    /* Outer locals at the time we entered */
+
+    struct pending *locals;
+
+    /* Pending func params at the time we entered */
+
+    struct pending *params;
+
+    /* Pointer into blocklist as of entry */
+
+    struct pending_block *old_blocks;
+
+    /* Name of function, if any, defining context */
+
+    struct symbol *name;
+
+    /* PC where this context starts */
+
+    CORE_ADDR start_addr;
+
+    /* Temp slot for exception handling. */
+
+    CORE_ADDR end_addr;
+
+    /* For error-checking matching push/pop */
+
+    int depth;
+
+  };
+
+EXTERN struct context_stack *context_stack;
+
+/* Index of first unused entry in context stack.  */
+
+EXTERN int context_stack_depth;
+
+/* Currently allocated size of context stack.  */
+
+EXTERN int context_stack_size;
+
+/* Macro "function" for popping contexts from the stack.  Pushing is
+   done by a real function, push_context.  This returns a pointer to a
+   struct context_stack.  */
+
+#define	pop_context() (&context_stack[--context_stack_depth]);
+
+/* Nonzero if within a function (so symbols should be local, if
+   nothing says specifically).  */
+
+EXTERN int within_function;
+
+/* List of blocks already made (lexical contexts already closed).
+   This is used at the end to make the blockvector.  */
+
+struct pending_block
+  {
+    struct pending_block *next;
+    struct block *block;
+  };
+
+/* Pointer to the head of a linked list of symbol blocks which have
+   already been finalized (lexical contexts already closed) and which
+   are just waiting to be built into a blockvector when finalizing the
+   associated symtab. */
+
+EXTERN struct pending_block *pending_blocks;
+
+
+struct subfile_stack
+  {
+    struct subfile_stack *next;
+    char *name;
+  };
+
+EXTERN struct subfile_stack *subfile_stack;
+
+#define next_symbol_text(objfile) (*next_symbol_text_func)(objfile)
+
+/* Function to invoke get the next symbol.  Return the symbol name. */
+
+EXTERN char *(*next_symbol_text_func) (struct objfile *);
+
+/* Vector of types defined so far, indexed by their type numbers.
+   Used for both stabs and coff.  (In newer sun systems, dbx uses a
+   pair of numbers in parens, as in "(SUBFILENUM,NUMWITHINSUBFILE)".
+   Then these numbers must be translated through the type_translations
+   hash table to get the index into the type vector.)  */
+
+EXTERN struct type **type_vector;
+
+/* Number of elements allocated for type_vector currently.  */
+
+EXTERN int type_vector_length;
+
+/* Initial size of type vector.  Is realloc'd larger if needed, and
+   realloc'd down to the size actually used, when completed.  */
+
+#define	INITIAL_TYPE_VECTOR_LENGTH	160
+
+extern void add_symbol_to_list (struct symbol *symbol,
+				struct pending **listhead);
+
+extern struct symbol *find_symbol_in_list (struct pending *list,
+					   char *name, int length);
+
+extern void finish_block (struct symbol *symbol,
+			  struct pending **listhead,
+			  struct pending_block *old_blocks,
+			  CORE_ADDR start, CORE_ADDR end,
+			  struct objfile *objfile);
+
+extern void really_free_pendings (int foo);
+
+extern void start_subfile (char *name, char *dirname);
+
+extern void patch_subfile_names (struct subfile *subfile, char *name);
+
+extern void push_subfile (void);
+
+extern char *pop_subfile (void);
+
+extern struct symtab *end_symtab (CORE_ADDR end_addr,
+				  struct objfile *objfile, int section);
+
+/* Defined in stabsread.c.  */
+
+extern void scan_file_globals (struct objfile *objfile);
+
+extern void buildsym_new_init (void);
+
+extern void buildsym_init (void);
+
+extern struct context_stack *push_context (int desc, CORE_ADDR valu);
+
+extern void record_line (struct subfile *subfile, int line, CORE_ADDR pc);
+
+extern void start_symtab (char *name, char *dirname, CORE_ADDR start_addr);
+
+extern int hashname (char *name);
+
+extern void free_pending_blocks (void);
+
+/* FIXME: Note that this is used only in buildsym.c and dstread.c,
+   which should be fixed to not need direct access to
+   make_blockvector. */
+
+extern struct blockvector *make_blockvector (struct objfile *objfile);
+
+/* FIXME: Note that this is used only in buildsym.c and dstread.c,
+   which should be fixed to not need direct access to
+   record_pending_block. */
+
+extern void record_pending_block (struct objfile *objfile,
+				  struct block *block,
+				  struct pending_block *opblock);
+
+extern void record_debugformat (char *format);
+
+extern void merge_symbol_lists (struct pending **srclist,
+				struct pending **targetlist);
+
+#undef EXTERN
+
+#endif /* defined (BUILDSYM_H) */
diff --git a/gdb/c-exp.y b/gdb/c-exp.y
new file mode 100644
index 0000000..377f92a
--- /dev/null
+++ b/gdb/c-exp.y
@@ -0,0 +1,1740 @@
+/* YACC parser for C expressions, for GDB.
+   Copyright (C) 1986, 1989, 1990, 1991, 1993, 1994, 1996, 1997
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parse a C expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.
+
+   Note that malloc's and realloc's in this file are transformed to
+   xmalloc and xrealloc respectively by the same sed command in the
+   makefile that remaps any other malloc/realloc inserted by the parser
+   generator.  Doing this with #defines and trying to control the interaction
+   with include files (<malloc.h> and <stdlib.h> for example) just became
+   too messy, particularly when such includes can be inserted at random
+   times by the parser generator.  */
+   
+%{
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "expression.h"
+#include "value.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "c-lang.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h" /* For have_full_symbols and have_partial_symbols */
+
+/* Flag indicating we're dealing with HP-compiled objects */ 
+extern int hp_som_som_object_present;
+
+/* Remap normal yacc parser interface names (yyparse, yylex, yyerror, etc),
+   as well as gratuitiously global symbol names, so we can have multiple
+   yacc generated parsers in gdb.  Note that these are only the variables
+   produced by yacc.  If other parser generators (bison, byacc, etc) produce
+   additional global names that conflict at link time, then those parser
+   generators need to be fixed instead of adding those names to this list. */
+
+#define	yymaxdepth c_maxdepth
+#define	yyparse	c_parse
+#define	yylex	c_lex
+#define	yyerror	c_error
+#define	yylval	c_lval
+#define	yychar	c_char
+#define	yydebug	c_debug
+#define	yypact	c_pact	
+#define	yyr1	c_r1			
+#define	yyr2	c_r2			
+#define	yydef	c_def		
+#define	yychk	c_chk		
+#define	yypgo	c_pgo		
+#define	yyact	c_act		
+#define	yyexca	c_exca
+#define yyerrflag c_errflag
+#define yynerrs	c_nerrs
+#define	yyps	c_ps
+#define	yypv	c_pv
+#define	yys	c_s
+#define	yy_yys	c_yys
+#define	yystate	c_state
+#define	yytmp	c_tmp
+#define	yyv	c_v
+#define	yy_yyv	c_yyv
+#define	yyval	c_val
+#define	yylloc	c_lloc
+#define yyreds	c_reds		/* With YYDEBUG defined */
+#define yytoks	c_toks		/* With YYDEBUG defined */
+#define yylhs	c_yylhs
+#define yylen	c_yylen
+#define yydefred c_yydefred
+#define yydgoto	c_yydgoto
+#define yysindex c_yysindex
+#define yyrindex c_yyrindex
+#define yygindex c_yygindex
+#define yytable	 c_yytable
+#define yycheck	 c_yycheck
+
+#ifndef YYDEBUG
+#define	YYDEBUG	0		/* Default to no yydebug support */
+#endif
+
+int
+yyparse PARAMS ((void));
+
+static int
+yylex PARAMS ((void));
+
+void
+yyerror PARAMS ((char *));
+
+%}
+
+/* Although the yacc "value" of an expression is not used,
+   since the result is stored in the structure being created,
+   other node types do have values.  */
+
+%union
+  {
+    LONGEST lval;
+    struct {
+      LONGEST val;
+      struct type *type;
+    } typed_val_int;
+    struct {
+      DOUBLEST dval;
+      struct type *type;
+    } typed_val_float;
+    struct symbol *sym;
+    struct type *tval;
+    struct stoken sval;
+    struct ttype tsym;
+    struct symtoken ssym;
+    int voidval;
+    struct block *bval;
+    enum exp_opcode opcode;
+    struct internalvar *ivar;
+
+    struct type **tvec;
+    int *ivec;
+  }
+
+%{
+/* YYSTYPE gets defined by %union */
+static int
+parse_number PARAMS ((char *, int, int, YYSTYPE *));
+%}
+
+%type <voidval> exp exp1 type_exp start variable qualified_name lcurly
+%type <lval> rcurly
+%type <tval> type typebase
+%type <tvec> nonempty_typelist
+/* %type <bval> block */
+
+/* Fancy type parsing.  */
+%type <voidval> func_mod direct_abs_decl abs_decl
+%type <tval> ptype
+%type <lval> array_mod
+
+%token <typed_val_int> INT
+%token <typed_val_float> FLOAT
+
+/* Both NAME and TYPENAME tokens represent symbols in the input,
+   and both convey their data as strings.
+   But a TYPENAME is a string that happens to be defined as a typedef
+   or builtin type name (such as int or char)
+   and a NAME is any other symbol.
+   Contexts where this distinction is not important can use the
+   nonterminal "name", which matches either NAME or TYPENAME.  */
+
+%token <sval> STRING
+%token <ssym> NAME /* BLOCKNAME defined below to give it higher precedence. */
+%token <tsym> TYPENAME
+%type <sval> name
+%type <ssym> name_not_typename
+%type <tsym> typename
+
+/* A NAME_OR_INT is a symbol which is not known in the symbol table,
+   but which would parse as a valid number in the current input radix.
+   E.g. "c" when input_radix==16.  Depending on the parse, it will be
+   turned into a name or into a number.  */
+
+%token <ssym> NAME_OR_INT 
+
+%token STRUCT CLASS UNION ENUM SIZEOF UNSIGNED COLONCOLON
+%token TEMPLATE
+%token ERROR
+
+/* Special type cases, put in to allow the parser to distinguish different
+   legal basetypes.  */
+%token SIGNED_KEYWORD LONG SHORT INT_KEYWORD CONST_KEYWORD VOLATILE_KEYWORD DOUBLE_KEYWORD
+
+%token <voidval> VARIABLE
+
+%token <opcode> ASSIGN_MODIFY
+
+/* C++ */
+%token THIS
+%token TRUEKEYWORD
+%token FALSEKEYWORD
+
+
+%left ','
+%left ABOVE_COMMA
+%right '=' ASSIGN_MODIFY
+%right '?'
+%left OROR
+%left ANDAND
+%left '|'
+%left '^'
+%left '&'
+%left EQUAL NOTEQUAL
+%left '<' '>' LEQ GEQ
+%left LSH RSH
+%left '@'
+%left '+' '-'
+%left '*' '/' '%'
+%right UNARY INCREMENT DECREMENT
+%right ARROW '.' '[' '('
+%token <ssym> BLOCKNAME 
+%token <bval> FILENAME
+%type <bval> block
+%left COLONCOLON
+
+
+%%
+
+start   :	exp1
+	|	type_exp
+	;
+
+type_exp:	type
+			{ write_exp_elt_opcode(OP_TYPE);
+			  write_exp_elt_type($1);
+			  write_exp_elt_opcode(OP_TYPE);}
+	;
+
+/* Expressions, including the comma operator.  */
+exp1	:	exp
+	|	exp1 ',' exp
+			{ write_exp_elt_opcode (BINOP_COMMA); }
+	;
+
+/* Expressions, not including the comma operator.  */
+exp	:	'*' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_IND); }
+
+exp	:	'&' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_ADDR); }
+
+exp	:	'-' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_NEG); }
+	;
+
+exp	:	'!' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_LOGICAL_NOT); }
+	;
+
+exp	:	'~' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_COMPLEMENT); }
+	;
+
+exp	:	INCREMENT exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_PREINCREMENT); }
+	;
+
+exp	:	DECREMENT exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_PREDECREMENT); }
+	;
+
+exp	:	exp INCREMENT    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_POSTINCREMENT); }
+	;
+
+exp	:	exp DECREMENT    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_POSTDECREMENT); }
+	;
+
+exp	:	SIZEOF exp       %prec UNARY
+			{ write_exp_elt_opcode (UNOP_SIZEOF); }
+	;
+
+exp	:	exp ARROW name
+			{ write_exp_elt_opcode (STRUCTOP_PTR);
+			  write_exp_string ($3);
+			  write_exp_elt_opcode (STRUCTOP_PTR); }
+	;
+
+exp	:	exp ARROW qualified_name
+			{ /* exp->type::name becomes exp->*(&type::name) */
+			  /* Note: this doesn't work if name is a
+			     static member!  FIXME */
+			  write_exp_elt_opcode (UNOP_ADDR);
+			  write_exp_elt_opcode (STRUCTOP_MPTR); }
+	;
+
+exp	:	exp ARROW '*' exp
+			{ write_exp_elt_opcode (STRUCTOP_MPTR); }
+	;
+
+exp	:	exp '.' name
+			{ write_exp_elt_opcode (STRUCTOP_STRUCT);
+			  write_exp_string ($3);
+			  write_exp_elt_opcode (STRUCTOP_STRUCT); }
+	;
+
+exp	:	exp '.' qualified_name
+			{ /* exp.type::name becomes exp.*(&type::name) */
+			  /* Note: this doesn't work if name is a
+			     static member!  FIXME */
+			  write_exp_elt_opcode (UNOP_ADDR);
+			  write_exp_elt_opcode (STRUCTOP_MEMBER); }
+	;
+
+exp	:	exp '.' '*' exp
+			{ write_exp_elt_opcode (STRUCTOP_MEMBER); }
+	;
+
+exp	:	exp '[' exp1 ']'
+			{ write_exp_elt_opcode (BINOP_SUBSCRIPT); }
+	;
+
+exp	:	exp '(' 
+			/* This is to save the value of arglist_len
+			   being accumulated by an outer function call.  */
+			{ start_arglist (); }
+		arglist ')'	%prec ARROW
+			{ write_exp_elt_opcode (OP_FUNCALL);
+			  write_exp_elt_longcst ((LONGEST) end_arglist ());
+			  write_exp_elt_opcode (OP_FUNCALL); }
+	;
+
+lcurly	:	'{'
+			{ start_arglist (); }
+	;
+
+arglist	:
+	;
+
+arglist	:	exp
+			{ arglist_len = 1; }
+	;
+
+arglist	:	arglist ',' exp   %prec ABOVE_COMMA
+			{ arglist_len++; }
+	;
+
+rcurly	:	'}'
+			{ $$ = end_arglist () - 1; }
+	;
+exp	:	lcurly arglist rcurly	%prec ARROW
+			{ write_exp_elt_opcode (OP_ARRAY);
+			  write_exp_elt_longcst ((LONGEST) 0);
+			  write_exp_elt_longcst ((LONGEST) $3);
+			  write_exp_elt_opcode (OP_ARRAY); }
+	;
+
+exp	:	lcurly type rcurly exp  %prec UNARY
+			{ write_exp_elt_opcode (UNOP_MEMVAL);
+			  write_exp_elt_type ($2);
+			  write_exp_elt_opcode (UNOP_MEMVAL); }
+	;
+
+exp	:	'(' type ')' exp  %prec UNARY
+			{ write_exp_elt_opcode (UNOP_CAST);
+			  write_exp_elt_type ($2);
+			  write_exp_elt_opcode (UNOP_CAST); }
+	;
+
+exp	:	'(' exp1 ')'
+			{ }
+	;
+
+/* Binary operators in order of decreasing precedence.  */
+
+exp	:	exp '@' exp
+			{ write_exp_elt_opcode (BINOP_REPEAT); }
+	;
+
+exp	:	exp '*' exp
+			{ write_exp_elt_opcode (BINOP_MUL); }
+	;
+
+exp	:	exp '/' exp
+			{ write_exp_elt_opcode (BINOP_DIV); }
+	;
+
+exp	:	exp '%' exp
+			{ write_exp_elt_opcode (BINOP_REM); }
+	;
+
+exp	:	exp '+' exp
+			{ write_exp_elt_opcode (BINOP_ADD); }
+	;
+
+exp	:	exp '-' exp
+			{ write_exp_elt_opcode (BINOP_SUB); }
+	;
+
+exp	:	exp LSH exp
+			{ write_exp_elt_opcode (BINOP_LSH); }
+	;
+
+exp	:	exp RSH exp
+			{ write_exp_elt_opcode (BINOP_RSH); }
+	;
+
+exp	:	exp EQUAL exp
+			{ write_exp_elt_opcode (BINOP_EQUAL); }
+	;
+
+exp	:	exp NOTEQUAL exp
+			{ write_exp_elt_opcode (BINOP_NOTEQUAL); }
+	;
+
+exp	:	exp LEQ exp
+			{ write_exp_elt_opcode (BINOP_LEQ); }
+	;
+
+exp	:	exp GEQ exp
+			{ write_exp_elt_opcode (BINOP_GEQ); }
+	;
+
+exp	:	exp '<' exp
+			{ write_exp_elt_opcode (BINOP_LESS); }
+	;
+
+exp	:	exp '>' exp
+			{ write_exp_elt_opcode (BINOP_GTR); }
+	;
+
+exp	:	exp '&' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_AND); }
+	;
+
+exp	:	exp '^' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_XOR); }
+	;
+
+exp	:	exp '|' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_IOR); }
+	;
+
+exp	:	exp ANDAND exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_AND); }
+	;
+
+exp	:	exp OROR exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_OR); }
+	;
+
+exp	:	exp '?' exp ':' exp	%prec '?'
+			{ write_exp_elt_opcode (TERNOP_COND); }
+	;
+			  
+exp	:	exp '=' exp
+			{ write_exp_elt_opcode (BINOP_ASSIGN); }
+	;
+
+exp	:	exp ASSIGN_MODIFY exp
+			{ write_exp_elt_opcode (BINOP_ASSIGN_MODIFY);
+			  write_exp_elt_opcode ($2);
+			  write_exp_elt_opcode (BINOP_ASSIGN_MODIFY); }
+	;
+
+exp	:	INT
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type ($1.type);
+			  write_exp_elt_longcst ((LONGEST)($1.val));
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	NAME_OR_INT
+			{ YYSTYPE val;
+			  parse_number ($1.stoken.ptr, $1.stoken.length, 0, &val);
+			  write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (val.typed_val_int.type);
+			  write_exp_elt_longcst ((LONGEST)val.typed_val_int.val);
+			  write_exp_elt_opcode (OP_LONG);
+			}
+	;
+
+
+exp	:	FLOAT
+			{ write_exp_elt_opcode (OP_DOUBLE);
+			  write_exp_elt_type ($1.type);
+			  write_exp_elt_dblcst ($1.dval);
+			  write_exp_elt_opcode (OP_DOUBLE); }
+	;
+
+exp	:	variable
+	;
+
+exp	:	VARIABLE
+			/* Already written by write_dollar_variable. */
+	;
+
+exp	:	SIZEOF '(' type ')'	%prec UNARY
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_int);
+			  CHECK_TYPEDEF ($3);
+			  write_exp_elt_longcst ((LONGEST) TYPE_LENGTH ($3));
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	STRING
+			{ /* C strings are converted into array constants with
+			     an explicit null byte added at the end.  Thus
+			     the array upper bound is the string length.
+			     There is no such thing in C as a completely empty
+			     string. */
+			  char *sp = $1.ptr; int count = $1.length;
+			  while (count-- > 0)
+			    {
+			      write_exp_elt_opcode (OP_LONG);
+			      write_exp_elt_type (builtin_type_char);
+			      write_exp_elt_longcst ((LONGEST)(*sp++));
+			      write_exp_elt_opcode (OP_LONG);
+			    }
+			  write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_char);
+			  write_exp_elt_longcst ((LONGEST)'\0');
+			  write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_opcode (OP_ARRAY);
+			  write_exp_elt_longcst ((LONGEST) 0);
+			  write_exp_elt_longcst ((LONGEST) ($1.length));
+			  write_exp_elt_opcode (OP_ARRAY); }
+	;
+
+/* C++.  */
+exp	:	THIS
+			{ write_exp_elt_opcode (OP_THIS);
+			  write_exp_elt_opcode (OP_THIS); }
+	;
+
+exp     :       TRUEKEYWORD    
+                        { write_exp_elt_opcode (OP_LONG);
+                          write_exp_elt_type (builtin_type_bool);
+                          write_exp_elt_longcst ((LONGEST) 1);
+                          write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp     :       FALSEKEYWORD   
+                        { write_exp_elt_opcode (OP_LONG);
+                          write_exp_elt_type (builtin_type_bool);
+                          write_exp_elt_longcst ((LONGEST) 0);
+                          write_exp_elt_opcode (OP_LONG); }
+	;
+
+/* end of C++.  */
+
+block	:	BLOCKNAME
+			{
+			  if ($1.sym)
+			    $$ = SYMBOL_BLOCK_VALUE ($1.sym);
+			  else
+			    error ("No file or function \"%s\".",
+				   copy_name ($1.stoken));
+			}
+	|	FILENAME
+			{
+			  $$ = $1;
+			}
+	;
+
+block	:	block COLONCOLON name
+			{ struct symbol *tem
+			    = lookup_symbol (copy_name ($3), $1,
+					     VAR_NAMESPACE, (int *) NULL,
+					     (struct symtab **) NULL);
+			  if (!tem || SYMBOL_CLASS (tem) != LOC_BLOCK)
+			    error ("No function \"%s\" in specified context.",
+				   copy_name ($3));
+			  $$ = SYMBOL_BLOCK_VALUE (tem); }
+	;
+
+variable:	block COLONCOLON name
+			{ struct symbol *sym;
+			  sym = lookup_symbol (copy_name ($3), $1,
+					       VAR_NAMESPACE, (int *) NULL,
+					       (struct symtab **) NULL);
+			  if (sym == 0)
+			    error ("No symbol \"%s\" in specified context.",
+				   copy_name ($3));
+
+			  write_exp_elt_opcode (OP_VAR_VALUE);
+			  /* block_found is set by lookup_symbol.  */
+			  write_exp_elt_block (block_found);
+			  write_exp_elt_sym (sym);
+			  write_exp_elt_opcode (OP_VAR_VALUE); }
+	;
+
+qualified_name:	typebase COLONCOLON name
+			{
+			  struct type *type = $1;
+			  if (TYPE_CODE (type) != TYPE_CODE_STRUCT
+			      && TYPE_CODE (type) != TYPE_CODE_UNION)
+			    error ("`%s' is not defined as an aggregate type.",
+				   TYPE_NAME (type));
+
+			  write_exp_elt_opcode (OP_SCOPE);
+			  write_exp_elt_type (type);
+			  write_exp_string ($3);
+			  write_exp_elt_opcode (OP_SCOPE);
+			}
+	|	typebase COLONCOLON '~' name
+			{
+			  struct type *type = $1;
+			  struct stoken tmp_token;
+			  if (TYPE_CODE (type) != TYPE_CODE_STRUCT
+			      && TYPE_CODE (type) != TYPE_CODE_UNION)
+			    error ("`%s' is not defined as an aggregate type.",
+				   TYPE_NAME (type));
+
+			  tmp_token.ptr = (char*) alloca ($4.length + 2);
+			  tmp_token.length = $4.length + 1;
+			  tmp_token.ptr[0] = '~';
+			  memcpy (tmp_token.ptr+1, $4.ptr, $4.length);
+			  tmp_token.ptr[tmp_token.length] = 0;
+
+			  /* Check for valid destructor name.  */
+			  destructor_name_p (tmp_token.ptr, type);
+			  write_exp_elt_opcode (OP_SCOPE);
+			  write_exp_elt_type (type);
+			  write_exp_string (tmp_token);
+			  write_exp_elt_opcode (OP_SCOPE);
+			}
+	;
+
+variable:	qualified_name
+	|	COLONCOLON name
+			{
+			  char *name = copy_name ($2);
+			  struct symbol *sym;
+			  struct minimal_symbol *msymbol;
+
+			  sym =
+			    lookup_symbol (name, (const struct block *) NULL,
+					   VAR_NAMESPACE, (int *) NULL,
+					   (struct symtab **) NULL);
+			  if (sym)
+			    {
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      write_exp_elt_block (NULL);
+			      write_exp_elt_sym (sym);
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      break;
+			    }
+
+			  msymbol = lookup_minimal_symbol (name, NULL, NULL);
+			  if (msymbol != NULL)
+			    {
+			      write_exp_msymbol (msymbol,
+						 lookup_function_type (builtin_type_int),
+						 builtin_type_int);
+			    }
+			  else
+			    if (!have_full_symbols () && !have_partial_symbols ())
+			      error ("No symbol table is loaded.  Use the \"file\" command.");
+			    else
+			      error ("No symbol \"%s\" in current context.", name);
+			}
+	;
+
+variable:	name_not_typename
+			{ struct symbol *sym = $1.sym;
+
+			  if (sym)
+			    {
+			      if (symbol_read_needs_frame (sym))
+				{
+				  if (innermost_block == 0 ||
+				      contained_in (block_found, 
+						    innermost_block))
+				    innermost_block = block_found;
+				}
+
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      /* We want to use the selected frame, not
+				 another more inner frame which happens to
+				 be in the same block.  */
+			      write_exp_elt_block (NULL);
+			      write_exp_elt_sym (sym);
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			    }
+			  else if ($1.is_a_field_of_this)
+			    {
+			      /* C++: it hangs off of `this'.  Must
+			         not inadvertently convert from a method call
+				 to data ref.  */
+			      if (innermost_block == 0 || 
+				  contained_in (block_found, innermost_block))
+				innermost_block = block_found;
+			      write_exp_elt_opcode (OP_THIS);
+			      write_exp_elt_opcode (OP_THIS);
+			      write_exp_elt_opcode (STRUCTOP_PTR);
+			      write_exp_string ($1.stoken);
+			      write_exp_elt_opcode (STRUCTOP_PTR);
+			    }
+			  else
+			    {
+			      struct minimal_symbol *msymbol;
+			      register char *arg = copy_name ($1.stoken);
+
+			      msymbol =
+				lookup_minimal_symbol (arg, NULL, NULL);
+			      if (msymbol != NULL)
+				{
+				  write_exp_msymbol (msymbol,
+						     lookup_function_type (builtin_type_int),
+						     builtin_type_int);
+				}
+			      else if (!have_full_symbols () && !have_partial_symbols ())
+				error ("No symbol table is loaded.  Use the \"file\" command.");
+			      else
+				error ("No symbol \"%s\" in current context.",
+				       copy_name ($1.stoken));
+			    }
+			}
+	;
+
+
+ptype	:	typebase
+	/* "const" and "volatile" are curently ignored.  A type qualifier
+	   before the type is currently handled in the typebase rule.
+	   The reason for recognizing these here (shift/reduce conflicts)
+	   might be obsolete now that some pointer to member rules have
+	   been deleted.  */
+	|	typebase CONST_KEYWORD
+	|	typebase VOLATILE_KEYWORD
+	|	typebase abs_decl
+		{ $$ = follow_types ($1); }
+	|	typebase CONST_KEYWORD abs_decl
+		{ $$ = follow_types ($1); }
+	|	typebase VOLATILE_KEYWORD abs_decl
+		{ $$ = follow_types ($1); }
+	;
+
+abs_decl:	'*'
+			{ push_type (tp_pointer); $$ = 0; }
+	|	'*' abs_decl
+			{ push_type (tp_pointer); $$ = $2; }
+	|	'&'
+			{ push_type (tp_reference); $$ = 0; }
+	|	'&' abs_decl
+			{ push_type (tp_reference); $$ = $2; }
+	|	direct_abs_decl
+	;
+
+direct_abs_decl: '(' abs_decl ')'
+			{ $$ = $2; }
+	|	direct_abs_decl array_mod
+			{
+			  push_type_int ($2);
+			  push_type (tp_array);
+			}
+	|	array_mod
+			{
+			  push_type_int ($1);
+			  push_type (tp_array);
+			  $$ = 0;
+			}
+
+	| 	direct_abs_decl func_mod
+			{ push_type (tp_function); }
+	|	func_mod
+			{ push_type (tp_function); }
+	;
+
+array_mod:	'[' ']'
+			{ $$ = -1; }
+	|	'[' INT ']'
+			{ $$ = $2.val; }
+	;
+
+func_mod:	'(' ')'
+			{ $$ = 0; }
+	|	'(' nonempty_typelist ')'
+			{ free ((PTR)$2); $$ = 0; }
+	;
+
+/* We used to try to recognize more pointer to member types here, but
+   that didn't work (shift/reduce conflicts meant that these rules never
+   got executed).  The problem is that
+     int (foo::bar::baz::bizzle)
+   is a function type but
+     int (foo::bar::baz::bizzle::*)
+   is a pointer to member type.  Stroustrup loses again!  */
+
+type	:	ptype
+	|	typebase COLONCOLON '*'
+			{ $$ = lookup_member_type (builtin_type_int, $1); }
+	;
+
+typebase  /* Implements (approximately): (type-qualifier)* type-specifier */
+	:	TYPENAME
+			{ $$ = $1.type; }
+	|	INT_KEYWORD
+			{ $$ = builtin_type_int; }
+	|	LONG
+			{ $$ = builtin_type_long; }
+	|	SHORT
+			{ $$ = builtin_type_short; }
+	|	LONG INT_KEYWORD
+			{ $$ = builtin_type_long; }
+	|	UNSIGNED LONG INT_KEYWORD
+			{ $$ = builtin_type_unsigned_long; }
+	|	LONG LONG
+			{ $$ = builtin_type_long_long; }
+	|	LONG LONG INT_KEYWORD
+			{ $$ = builtin_type_long_long; }
+	|	UNSIGNED LONG LONG
+			{ $$ = builtin_type_unsigned_long_long; }
+	|	UNSIGNED LONG LONG INT_KEYWORD
+			{ $$ = builtin_type_unsigned_long_long; }
+	|	SHORT INT_KEYWORD
+			{ $$ = builtin_type_short; }
+	|	UNSIGNED SHORT INT_KEYWORD
+			{ $$ = builtin_type_unsigned_short; }
+	|	DOUBLE_KEYWORD
+			{ $$ = builtin_type_double; }
+	|	LONG DOUBLE_KEYWORD
+			{ $$ = builtin_type_long_double; }
+	|	STRUCT name
+			{ $$ = lookup_struct (copy_name ($2),
+					      expression_context_block); }
+	|	CLASS name
+			{ $$ = lookup_struct (copy_name ($2),
+					      expression_context_block); }
+	|	UNION name
+			{ $$ = lookup_union (copy_name ($2),
+					     expression_context_block); }
+	|	ENUM name
+			{ $$ = lookup_enum (copy_name ($2),
+					    expression_context_block); }
+	|	UNSIGNED typename
+			{ $$ = lookup_unsigned_typename (TYPE_NAME($2.type)); }
+	|	UNSIGNED
+			{ $$ = builtin_type_unsigned_int; }
+	|	SIGNED_KEYWORD typename
+			{ $$ = lookup_signed_typename (TYPE_NAME($2.type)); }
+	|	SIGNED_KEYWORD
+			{ $$ = builtin_type_int; }
+                /* It appears that this rule for templates is never
+                   reduced; template recognition happens by lookahead
+                   in the token processing code in yylex. */         
+	|	TEMPLATE name '<' type '>'
+			{ $$ = lookup_template_type(copy_name($2), $4,
+						    expression_context_block);
+			}
+	/* "const" and "volatile" are curently ignored.  A type qualifier
+	   after the type is handled in the ptype rule.  I think these could
+	   be too.  */
+	|	CONST_KEYWORD typebase { $$ = $2; }
+	|	VOLATILE_KEYWORD typebase { $$ = $2; }
+	;
+
+typename:	TYPENAME
+	|	INT_KEYWORD
+		{
+		  $$.stoken.ptr = "int";
+		  $$.stoken.length = 3;
+		  $$.type = builtin_type_int;
+		}
+	|	LONG
+		{
+		  $$.stoken.ptr = "long";
+		  $$.stoken.length = 4;
+		  $$.type = builtin_type_long;
+		}
+	|	SHORT
+		{
+		  $$.stoken.ptr = "short";
+		  $$.stoken.length = 5;
+		  $$.type = builtin_type_short;
+		}
+	;
+
+nonempty_typelist
+	:	type
+		{ $$ = (struct type **) malloc (sizeof (struct type *) * 2);
+		  $<ivec>$[0] = 1;	/* Number of types in vector */
+		  $$[1] = $1;
+		}
+	|	nonempty_typelist ',' type
+		{ int len = sizeof (struct type *) * (++($<ivec>1[0]) + 1);
+		  $$ = (struct type **) realloc ((char *) $1, len);
+		  $$[$<ivec>$[0]] = $3;
+		}
+	;
+
+name	:	NAME { $$ = $1.stoken; }
+	|	BLOCKNAME { $$ = $1.stoken; }
+	|	TYPENAME { $$ = $1.stoken; }
+	|	NAME_OR_INT  { $$ = $1.stoken; }
+	;
+
+name_not_typename :	NAME
+	|	BLOCKNAME
+/* These would be useful if name_not_typename was useful, but it is just
+   a fake for "variable", so these cause reduce/reduce conflicts because
+   the parser can't tell whether NAME_OR_INT is a name_not_typename (=variable,
+   =exp) or just an exp.  If name_not_typename was ever used in an lvalue
+   context where only a name could occur, this might be useful.
+  	|	NAME_OR_INT
+ */
+	;
+
+%%
+
+/* Take care of parsing a number (anything that starts with a digit).
+   Set yylval and return the token type; update lexptr.
+   LEN is the number of characters in it.  */
+
+/*** Needs some error checking for the float case ***/
+
+static int
+parse_number (p, len, parsed_float, putithere)
+     register char *p;
+     register int len;
+     int parsed_float;
+     YYSTYPE *putithere;
+{
+  /* FIXME: Shouldn't these be unsigned?  We don't deal with negative values
+     here, and we do kind of silly things like cast to unsigned.  */
+  register LONGEST n = 0;
+  register LONGEST prevn = 0;
+  ULONGEST un;
+
+  register int i = 0;
+  register int c;
+  register int base = input_radix;
+  int unsigned_p = 0;
+
+  /* Number of "L" suffixes encountered.  */
+  int long_p = 0;
+
+  /* We have found a "L" or "U" suffix.  */
+  int found_suffix = 0;
+
+  ULONGEST high_bit;
+  struct type *signed_type;
+  struct type *unsigned_type;
+
+  if (parsed_float)
+    {
+      /* It's a float since it contains a point or an exponent.  */
+      char c;
+      int num = 0;	/* number of tokens scanned by scanf */
+      char saved_char = p[len];
+
+      p[len] = 0;	/* null-terminate the token */
+      if (sizeof (putithere->typed_val_float.dval) <= sizeof (float))
+	num = sscanf (p, "%g%c", (float *) &putithere->typed_val_float.dval,&c);
+      else if (sizeof (putithere->typed_val_float.dval) <= sizeof (double))
+	num = sscanf (p, "%lg%c", (double *) &putithere->typed_val_float.dval,&c);
+      else
+	{
+#ifdef SCANF_HAS_LONG_DOUBLE
+	  num = sscanf (p, "%Lg%c", &putithere->typed_val_float.dval,&c);
+#else
+	  /* Scan it into a double, then assign it to the long double.
+	     This at least wins with values representable in the range
+	     of doubles. */
+	  double temp;
+	  num = sscanf (p, "%lg%c", &temp,&c);
+	  putithere->typed_val_float.dval = temp;
+#endif
+	}
+      p[len] = saved_char;	/* restore the input stream */
+      if (num != 1) 		/* check scanf found ONLY a float ... */
+	return ERROR;
+      /* See if it has `f' or `l' suffix (float or long double).  */
+
+      c = tolower (p[len - 1]);
+
+      if (c == 'f')
+	putithere->typed_val_float.type = builtin_type_float;
+      else if (c == 'l')
+	putithere->typed_val_float.type = builtin_type_long_double;
+      else if (isdigit (c) || c == '.')
+	putithere->typed_val_float.type = builtin_type_double;
+      else
+	return ERROR;
+
+      return FLOAT;
+    }
+
+  /* Handle base-switching prefixes 0x, 0t, 0d, 0 */
+  if (p[0] == '0')
+    switch (p[1])
+      {
+      case 'x':
+      case 'X':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 16;
+	    len -= 2;
+	  }
+	break;
+
+      case 't':
+      case 'T':
+      case 'd':
+      case 'D':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 10;
+	    len -= 2;
+	  }
+	break;
+
+      default:
+	base = 8;
+	break;
+      }
+
+  while (len-- > 0)
+    {
+      c = *p++;
+      if (c >= 'A' && c <= 'Z')
+	c += 'a' - 'A';
+      if (c != 'l' && c != 'u')
+	n *= base;
+      if (c >= '0' && c <= '9')
+	{
+	  if (found_suffix)
+	    return ERROR;
+	  n += i = c - '0';
+	}
+      else
+	{
+	  if (base > 10 && c >= 'a' && c <= 'f')
+	    {
+	      if (found_suffix)
+		return ERROR;
+	      n += i = c - 'a' + 10;
+	    }
+	  else if (c == 'l')
+	    {
+	      ++long_p;
+	      found_suffix = 1;
+	    }
+	  else if (c == 'u')
+	    {
+	      unsigned_p = 1;
+	      found_suffix = 1;
+	    }
+	  else
+	    return ERROR;	/* Char not a digit */
+	}
+      if (i >= base)
+	return ERROR;		/* Invalid digit in this base */
+
+      /* Portably test for overflow (only works for nonzero values, so make
+	 a second check for zero).  FIXME: Can't we just make n and prevn
+	 unsigned and avoid this?  */
+      if (c != 'l' && c != 'u' && (prevn >= n) && n != 0)
+	unsigned_p = 1;		/* Try something unsigned */
+
+      /* Portably test for unsigned overflow.
+	 FIXME: This check is wrong; for example it doesn't find overflow
+	 on 0x123456789 when LONGEST is 32 bits.  */
+      if (c != 'l' && c != 'u' && n != 0)
+	{	
+	  if ((unsigned_p && (ULONGEST) prevn >= (ULONGEST) n))
+	    error ("Numeric constant too large.");
+	}
+      prevn = n;
+    }
+
+  /* An integer constant is an int, a long, or a long long.  An L
+     suffix forces it to be long; an LL suffix forces it to be long
+     long.  If not forced to a larger size, it gets the first type of
+     the above that it fits in.  To figure out whether it fits, we
+     shift it right and see whether anything remains.  Note that we
+     can't shift sizeof (LONGEST) * HOST_CHAR_BIT bits or more in one
+     operation, because many compilers will warn about such a shift
+     (which always produces a zero result).  Sometimes TARGET_INT_BIT
+     or TARGET_LONG_BIT will be that big, sometimes not.  To deal with
+     the case where it is we just always shift the value more than
+     once, with fewer bits each time.  */
+
+  un = (ULONGEST)n >> 2;
+  if (long_p == 0
+      && (un >> (TARGET_INT_BIT - 2)) == 0)
+    {
+      high_bit = ((ULONGEST)1) << (TARGET_INT_BIT-1);
+
+      /* A large decimal (not hex or octal) constant (between INT_MAX
+	 and UINT_MAX) is a long or unsigned long, according to ANSI,
+	 never an unsigned int, but this code treats it as unsigned
+	 int.  This probably should be fixed.  GCC gives a warning on
+	 such constants.  */
+
+      unsigned_type = builtin_type_unsigned_int;
+      signed_type = builtin_type_int;
+    }
+  else if (long_p <= 1
+	   && (un >> (TARGET_LONG_BIT - 2)) == 0)
+    {
+      high_bit = ((ULONGEST)1) << (TARGET_LONG_BIT-1);
+      unsigned_type = builtin_type_unsigned_long;
+      signed_type = builtin_type_long;
+    }
+  else
+    {
+      int shift;
+      if (sizeof (ULONGEST) * HOST_CHAR_BIT < TARGET_LONG_LONG_BIT)
+	/* A long long does not fit in a LONGEST.  */
+	shift = (sizeof (ULONGEST) * HOST_CHAR_BIT - 1);
+      else
+	shift = (TARGET_LONG_LONG_BIT - 1);
+      high_bit = (ULONGEST) 1 << shift;
+      unsigned_type = builtin_type_unsigned_long_long;
+      signed_type = builtin_type_long_long;
+    }
+
+   putithere->typed_val_int.val = n;
+
+   /* If the high bit of the worked out type is set then this number
+      has to be unsigned. */
+
+   if (unsigned_p || (n & high_bit)) 
+     {
+       putithere->typed_val_int.type = unsigned_type;
+     }
+   else 
+     {
+       putithere->typed_val_int.type = signed_type;
+     }
+
+   return INT;
+}
+
+struct token
+{
+  char *operator;
+  int token;
+  enum exp_opcode opcode;
+};
+
+static const struct token tokentab3[] =
+  {
+    {">>=", ASSIGN_MODIFY, BINOP_RSH},
+    {"<<=", ASSIGN_MODIFY, BINOP_LSH}
+  };
+
+static const struct token tokentab2[] =
+  {
+    {"+=", ASSIGN_MODIFY, BINOP_ADD},
+    {"-=", ASSIGN_MODIFY, BINOP_SUB},
+    {"*=", ASSIGN_MODIFY, BINOP_MUL},
+    {"/=", ASSIGN_MODIFY, BINOP_DIV},
+    {"%=", ASSIGN_MODIFY, BINOP_REM},
+    {"|=", ASSIGN_MODIFY, BINOP_BITWISE_IOR},
+    {"&=", ASSIGN_MODIFY, BINOP_BITWISE_AND},
+    {"^=", ASSIGN_MODIFY, BINOP_BITWISE_XOR},
+    {"++", INCREMENT, BINOP_END},
+    {"--", DECREMENT, BINOP_END},
+    {"->", ARROW, BINOP_END},
+    {"&&", ANDAND, BINOP_END},
+    {"||", OROR, BINOP_END},
+    {"::", COLONCOLON, BINOP_END},
+    {"<<", LSH, BINOP_END},
+    {">>", RSH, BINOP_END},
+    {"==", EQUAL, BINOP_END},
+    {"!=", NOTEQUAL, BINOP_END},
+    {"<=", LEQ, BINOP_END},
+    {">=", GEQ, BINOP_END}
+  };
+
+/* Read one token, getting characters through lexptr.  */
+
+static int
+yylex ()
+{
+  int c;
+  int namelen;
+  unsigned int i;
+  char *tokstart;
+  char *tokptr;
+  int tempbufindex;
+  static char *tempbuf;
+  static int tempbufsize;
+  struct symbol * sym_class = NULL;
+  char * token_string = NULL;
+  int class_prefix = 0;
+  int unquoted_expr;
+   
+ retry:
+
+  unquoted_expr = 1;
+
+  tokstart = lexptr;
+  /* See if it is a special token of length 3.  */
+  for (i = 0; i < sizeof tokentab3 / sizeof tokentab3[0]; i++)
+    if (STREQN (tokstart, tokentab3[i].operator, 3))
+      {
+	lexptr += 3;
+	yylval.opcode = tokentab3[i].opcode;
+	return tokentab3[i].token;
+      }
+
+  /* See if it is a special token of length 2.  */
+  for (i = 0; i < sizeof tokentab2 / sizeof tokentab2[0]; i++)
+    if (STREQN (tokstart, tokentab2[i].operator, 2))
+      {
+	lexptr += 2;
+	yylval.opcode = tokentab2[i].opcode;
+	return tokentab2[i].token;
+      }
+
+  switch (c = *tokstart)
+    {
+    case 0:
+      return 0;
+
+    case ' ':
+    case '\t':
+    case '\n':
+      lexptr++;
+      goto retry;
+
+    case '\'':
+      /* We either have a character constant ('0' or '\177' for example)
+	 or we have a quoted symbol reference ('foo(int,int)' in C++
+	 for example). */
+      lexptr++;
+      c = *lexptr++;
+      if (c == '\\')
+	c = parse_escape (&lexptr);
+      else if (c == '\'')
+	error ("Empty character constant.");
+
+      yylval.typed_val_int.val = c;
+      yylval.typed_val_int.type = builtin_type_char;
+
+      c = *lexptr++;
+      if (c != '\'')
+	{
+	  namelen = skip_quoted (tokstart) - tokstart;
+	  if (namelen > 2)
+	    {
+	      lexptr = tokstart + namelen;
+              unquoted_expr = 0;
+	      if (lexptr[-1] != '\'')
+		error ("Unmatched single quote.");
+	      namelen -= 2;
+	      tokstart++;
+	      goto tryname;
+	    }
+	  error ("Invalid character constant.");
+	}
+      return INT;
+
+    case '(':
+      paren_depth++;
+      lexptr++;
+      return c;
+
+    case ')':
+      if (paren_depth == 0)
+	return 0;
+      paren_depth--;
+      lexptr++;
+      return c;
+
+    case ',':
+      if (comma_terminates && paren_depth == 0)
+	return 0;
+      lexptr++;
+      return c;
+
+    case '.':
+      /* Might be a floating point number.  */
+      if (lexptr[1] < '0' || lexptr[1] > '9')
+	goto symbol;		/* Nope, must be a symbol. */
+      /* FALL THRU into number case.  */
+
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
+      {
+	/* It's a number.  */
+	int got_dot = 0, got_e = 0, toktype;
+	register char *p = tokstart;
+	int hex = input_radix > 10;
+
+	if (c == '0' && (p[1] == 'x' || p[1] == 'X'))
+	  {
+	    p += 2;
+	    hex = 1;
+	  }
+	else if (c == '0' && (p[1]=='t' || p[1]=='T' || p[1]=='d' || p[1]=='D'))
+	  {
+	    p += 2;
+	    hex = 0;
+	  }
+
+	for (;; ++p)
+	  {
+	    /* This test includes !hex because 'e' is a valid hex digit
+	       and thus does not indicate a floating point number when
+	       the radix is hex.  */
+	    if (!hex && !got_e && (*p == 'e' || *p == 'E'))
+	      got_dot = got_e = 1;
+	    /* This test does not include !hex, because a '.' always indicates
+	       a decimal floating point number regardless of the radix.  */
+	    else if (!got_dot && *p == '.')
+	      got_dot = 1;
+	    else if (got_e && (p[-1] == 'e' || p[-1] == 'E')
+		     && (*p == '-' || *p == '+'))
+	      /* This is the sign of the exponent, not the end of the
+		 number.  */
+	      continue;
+	    /* We will take any letters or digits.  parse_number will
+	       complain if past the radix, or if L or U are not final.  */
+	    else if ((*p < '0' || *p > '9')
+		     && ((*p < 'a' || *p > 'z')
+				  && (*p < 'A' || *p > 'Z')))
+	      break;
+	  }
+	toktype = parse_number (tokstart, p - tokstart, got_dot|got_e, &yylval);
+        if (toktype == ERROR)
+	  {
+	    char *err_copy = (char *) alloca (p - tokstart + 1);
+
+	    memcpy (err_copy, tokstart, p - tokstart);
+	    err_copy[p - tokstart] = 0;
+	    error ("Invalid number \"%s\".", err_copy);
+	  }
+	lexptr = p;
+	return toktype;
+      }
+
+    case '+':
+    case '-':
+    case '*':
+    case '/':
+    case '%':
+    case '|':
+    case '&':
+    case '^':
+    case '~':
+    case '!':
+    case '@':
+    case '<':
+    case '>':
+    case '[':
+    case ']':
+    case '?':
+    case ':':
+    case '=':
+    case '{':
+    case '}':
+    symbol:
+      lexptr++;
+      return c;
+
+    case '"':
+
+      /* Build the gdb internal form of the input string in tempbuf,
+	 translating any standard C escape forms seen.  Note that the
+	 buffer is null byte terminated *only* for the convenience of
+	 debugging gdb itself and printing the buffer contents when
+	 the buffer contains no embedded nulls.  Gdb does not depend
+	 upon the buffer being null byte terminated, it uses the length
+	 string instead.  This allows gdb to handle C strings (as well
+	 as strings in other languages) with embedded null bytes */
+
+      tokptr = ++tokstart;
+      tempbufindex = 0;
+
+      do {
+	/* Grow the static temp buffer if necessary, including allocating
+	   the first one on demand. */
+	if (tempbufindex + 1 >= tempbufsize)
+	  {
+	    tempbuf = (char *) realloc (tempbuf, tempbufsize += 64);
+	  }
+	switch (*tokptr)
+	  {
+	  case '\0':
+	  case '"':
+	    /* Do nothing, loop will terminate. */
+	    break;
+	  case '\\':
+	    tokptr++;
+	    c = parse_escape (&tokptr);
+	    if (c == -1)
+	      {
+		continue;
+	      }
+	    tempbuf[tempbufindex++] = c;
+	    break;
+	  default:
+	    tempbuf[tempbufindex++] = *tokptr++;
+	    break;
+	  }
+      } while ((*tokptr != '"') && (*tokptr != '\0'));
+      if (*tokptr++ != '"')
+	{
+	  error ("Unterminated string in expression.");
+	}
+      tempbuf[tempbufindex] = '\0';	/* See note above */
+      yylval.sval.ptr = tempbuf;
+      yylval.sval.length = tempbufindex;
+      lexptr = tokptr;
+      return (STRING);
+    }
+
+  if (!(c == '_' || c == '$'
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
+    /* We must have come across a bad character (e.g. ';').  */
+    error ("Invalid character '%c' in expression.", c);
+
+  /* It's a name.  See how long it is.  */
+  namelen = 0;
+  for (c = tokstart[namelen];
+       (c == '_' || c == '$' || (c >= '0' && c <= '9')
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') || c == '<');)
+    {
+      /* Template parameter lists are part of the name.
+	 FIXME: This mishandles `print $a<4&&$a>3'.  */
+
+      if (c == '<')
+	{ 
+           if (hp_som_som_object_present)
+             {
+               /* Scan ahead to get rest of the template specification.  Note
+                  that we look ahead only when the '<' adjoins non-whitespace
+                  characters; for comparison expressions, e.g. "a < b > c",
+                  there must be spaces before the '<', etc. */
+               
+               char * p = find_template_name_end (tokstart + namelen);
+               if (p)
+                 namelen = p - tokstart;
+               break;
+             }
+           else
+             { 
+	       int i = namelen;
+	       int nesting_level = 1;
+	       while (tokstart[++i])
+		 {
+		   if (tokstart[i] == '<')
+		     nesting_level++;
+		   else if (tokstart[i] == '>')
+		     {
+		       if (--nesting_level == 0)
+			 break;
+		     }
+		 }
+	       if (tokstart[i] == '>')
+		 namelen = i;
+	       else
+		 break;
+	     }
+	}
+      c = tokstart[++namelen];
+    }
+
+  /* The token "if" terminates the expression and is NOT 
+     removed from the input stream.  */
+  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
+    {
+      return 0;
+    }
+
+  lexptr += namelen;
+
+  tryname:
+
+  /* Catch specific keywords.  Should be done with a data structure.  */
+  switch (namelen)
+    {
+    case 8:
+      if (STREQN (tokstart, "unsigned", 8))
+	return UNSIGNED;
+      if (current_language->la_language == language_cplus
+	  && STREQN (tokstart, "template", 8))
+	return TEMPLATE;
+      if (STREQN (tokstart, "volatile", 8))
+	return VOLATILE_KEYWORD;
+      break;
+    case 6:
+      if (STREQN (tokstart, "struct", 6))
+	return STRUCT;
+      if (STREQN (tokstart, "signed", 6))
+	return SIGNED_KEYWORD;
+      if (STREQN (tokstart, "sizeof", 6))      
+	return SIZEOF;
+      if (STREQN (tokstart, "double", 6))      
+	return DOUBLE_KEYWORD;
+      break;
+    case 5:
+      if (current_language->la_language == language_cplus)
+        {
+          if (STREQN (tokstart, "false", 5))
+            return FALSEKEYWORD;
+          if (STREQN (tokstart, "class", 5))
+            return CLASS;
+        }
+      if (STREQN (tokstart, "union", 5))
+	return UNION;
+      if (STREQN (tokstart, "short", 5))
+	return SHORT;
+      if (STREQN (tokstart, "const", 5))
+	return CONST_KEYWORD;
+      break;
+    case 4:
+      if (STREQN (tokstart, "enum", 4))
+	return ENUM;
+      if (STREQN (tokstart, "long", 4))
+	return LONG;
+      if (current_language->la_language == language_cplus)
+          {
+            if (STREQN (tokstart, "true", 4))
+              return TRUEKEYWORD;
+
+            if (STREQN (tokstart, "this", 4))
+              {
+                static const char this_name[] =
+                { CPLUS_MARKER, 't', 'h', 'i', 's', '\0' };
+                
+                if (lookup_symbol (this_name, expression_context_block,
+                                   VAR_NAMESPACE, (int *) NULL,
+                                   (struct symtab **) NULL))
+                  return THIS;
+              }
+          }
+      break;
+    case 3:
+      if (STREQN (tokstart, "int", 3))
+	return INT_KEYWORD;
+      break;
+    default:
+      break;
+    }
+
+  yylval.sval.ptr = tokstart;
+  yylval.sval.length = namelen;
+
+  if (*tokstart == '$')
+    {
+      write_dollar_variable (yylval.sval);
+      return VARIABLE;
+    }
+  
+  /* Look ahead and see if we can consume more of the input
+     string to get a reasonable class/namespace spec or a
+     fully-qualified name.  This is a kludge to get around the
+     HP aCC compiler's generation of symbol names with embedded
+     colons for namespace and nested classes. */ 
+  if (unquoted_expr)
+    {
+      /* Only do it if not inside single quotes */ 
+      sym_class = parse_nested_classes_for_hpacc (yylval.sval.ptr, yylval.sval.length,
+                                                  &token_string, &class_prefix, &lexptr);
+      if (sym_class)
+        {
+          /* Replace the current token with the bigger one we found */ 
+          yylval.sval.ptr = token_string;
+          yylval.sval.length = strlen (token_string);
+        }
+    }
+  
+  /* Use token-type BLOCKNAME for symbols that happen to be defined as
+     functions or symtabs.  If this is not so, then ...
+     Use token-type TYPENAME for symbols that happen to be defined
+     currently as names of types; NAME for other symbols.
+     The caller is not constrained to care about the distinction.  */
+  {
+    char *tmp = copy_name (yylval.sval);
+    struct symbol *sym;
+    int is_a_field_of_this = 0;
+    int hextype;
+
+    sym = lookup_symbol (tmp, expression_context_block,
+			 VAR_NAMESPACE,
+			 current_language->la_language == language_cplus
+			 ? &is_a_field_of_this : (int *) NULL,
+			 (struct symtab **) NULL);
+    /* Call lookup_symtab, not lookup_partial_symtab, in case there are
+       no psymtabs (coff, xcoff, or some future change to blow away the
+       psymtabs once once symbols are read).  */
+    if (sym && SYMBOL_CLASS (sym) == LOC_BLOCK)
+      {
+	yylval.ssym.sym = sym;
+	yylval.ssym.is_a_field_of_this = is_a_field_of_this;
+	return BLOCKNAME;
+      }
+    else if (!sym)
+      {				/* See if it's a file name. */
+	struct symtab *symtab;
+
+	symtab = lookup_symtab (tmp);
+
+	if (symtab)
+	  {
+	    yylval.bval = BLOCKVECTOR_BLOCK (BLOCKVECTOR (symtab), STATIC_BLOCK);
+	    return FILENAME;
+	  }
+      }
+
+    if (sym && SYMBOL_CLASS (sym) == LOC_TYPEDEF)
+        {
+#if 1
+	  /* Despite the following flaw, we need to keep this code enabled.
+	     Because we can get called from check_stub_method, if we don't
+	     handle nested types then it screws many operations in any
+	     program which uses nested types.  */
+	  /* In "A::x", if x is a member function of A and there happens
+	     to be a type (nested or not, since the stabs don't make that
+	     distinction) named x, then this code incorrectly thinks we
+	     are dealing with nested types rather than a member function.  */
+
+	  char *p;
+	  char *namestart;
+	  struct symbol *best_sym;
+
+	  /* Look ahead to detect nested types.  This probably should be
+	     done in the grammar, but trying seemed to introduce a lot
+	     of shift/reduce and reduce/reduce conflicts.  It's possible
+	     that it could be done, though.  Or perhaps a non-grammar, but
+	     less ad hoc, approach would work well.  */
+
+	  /* Since we do not currently have any way of distinguishing
+	     a nested type from a non-nested one (the stabs don't tell
+	     us whether a type is nested), we just ignore the
+	     containing type.  */
+
+	  p = lexptr;
+	  best_sym = sym;
+	  while (1)
+	    {
+	      /* Skip whitespace.  */
+	      while (*p == ' ' || *p == '\t' || *p == '\n')
+		++p;
+	      if (*p == ':' && p[1] == ':')
+		{
+		  /* Skip the `::'.  */
+		  p += 2;
+		  /* Skip whitespace.  */
+		  while (*p == ' ' || *p == '\t' || *p == '\n')
+		    ++p;
+		  namestart = p;
+		  while (*p == '_' || *p == '$' || (*p >= '0' && *p <= '9')
+			 || (*p >= 'a' && *p <= 'z')
+			 || (*p >= 'A' && *p <= 'Z'))
+		    ++p;
+		  if (p != namestart)
+		    {
+		      struct symbol *cur_sym;
+		      /* As big as the whole rest of the expression, which is
+			 at least big enough.  */
+		      char *ncopy = alloca (strlen (tmp)+strlen (namestart)+3);
+		      char *tmp1;
+
+		      tmp1 = ncopy;
+		      memcpy (tmp1, tmp, strlen (tmp));
+		      tmp1 += strlen (tmp);
+		      memcpy (tmp1, "::", 2);
+		      tmp1 += 2;
+		      memcpy (tmp1, namestart, p - namestart);
+		      tmp1[p - namestart] = '\0';
+		      cur_sym = lookup_symbol (ncopy, expression_context_block,
+					       VAR_NAMESPACE, (int *) NULL,
+					       (struct symtab **) NULL);
+		      if (cur_sym)
+			{
+			  if (SYMBOL_CLASS (cur_sym) == LOC_TYPEDEF)
+			    {
+			      best_sym = cur_sym;
+			      lexptr = p;
+			    }
+			  else
+			    break;
+			}
+		      else
+			break;
+		    }
+		  else
+		    break;
+		}
+	      else
+		break;
+	    }
+
+	  yylval.tsym.type = SYMBOL_TYPE (best_sym);
+#else /* not 0 */
+	  yylval.tsym.type = SYMBOL_TYPE (sym);
+#endif /* not 0 */
+	  return TYPENAME;
+        }
+    if ((yylval.tsym.type = lookup_primitive_typename (tmp)) != 0)
+	return TYPENAME;
+
+    /* Input names that aren't symbols but ARE valid hex numbers,
+       when the input radix permits them, can be names or numbers
+       depending on the parse.  Note we support radixes > 16 here.  */
+    if (!sym && 
+        ((tokstart[0] >= 'a' && tokstart[0] < 'a' + input_radix - 10) ||
+         (tokstart[0] >= 'A' && tokstart[0] < 'A' + input_radix - 10)))
+      {
+ 	YYSTYPE newlval;	/* Its value is ignored.  */
+	hextype = parse_number (tokstart, namelen, 0, &newlval);
+	if (hextype == INT)
+	  {
+	    yylval.ssym.sym = sym;
+	    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
+	    return NAME_OR_INT;
+	  }
+      }
+
+    /* Any other kind of symbol */
+    yylval.ssym.sym = sym;
+    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
+    return NAME;
+  }
+}
+
+void
+yyerror (msg)
+     char *msg;
+{
+  error ("A %s in expression, near `%s'.", (msg ? msg : "error"), lexptr);
+}
diff --git a/gdb/c-lang.c b/gdb/c-lang.c
new file mode 100644
index 0000000..e7aa055
--- /dev/null
+++ b/gdb/c-lang.c
@@ -0,0 +1,527 @@
+/* C language support routines for GDB, the GNU debugger.
+   Copyright 1992, 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "c-lang.h"
+
+static void c_emit_char PARAMS ((int c, GDB_FILE *stream, int quoter));
+
+/* Print the character C on STREAM as part of the contents of a literal
+   string whose delimiter is QUOTER.  Note that that format for printing
+   characters and strings is language specific. */
+
+static void
+c_emit_char (c, stream, quoter)
+     register int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+  c &= 0xFF;			/* Avoid sign bit follies */
+
+  if (PRINT_LITERAL_FORM (c))
+    {
+      if (c == '\\' || c == quoter)
+	{
+	  fputs_filtered ("\\", stream);
+	}
+      fprintf_filtered (stream, "%c", c);
+    }
+  else
+    {
+      switch (c)
+	{
+	case '\n':
+	  fputs_filtered ("\\n", stream);
+	  break;
+	case '\b':
+	  fputs_filtered ("\\b", stream);
+	  break;
+	case '\t':
+	  fputs_filtered ("\\t", stream);
+	  break;
+	case '\f':
+	  fputs_filtered ("\\f", stream);
+	  break;
+	case '\r':
+	  fputs_filtered ("\\r", stream);
+	  break;
+	case '\033':
+	  fputs_filtered ("\\e", stream);
+	  break;
+	case '\007':
+	  fputs_filtered ("\\a", stream);
+	  break;
+	default:
+	  fprintf_filtered (stream, "\\%.3o", (unsigned int) c);
+	  break;
+	}
+    }
+}
+
+void
+c_printchar (c, stream)
+     int c;
+     GDB_FILE *stream;
+{
+  fputc_filtered ('\'', stream);
+  LA_EMIT_CHAR (c, stream, '\'');
+  fputc_filtered ('\'', stream);
+}
+
+/* Print the character string STRING, printing at most LENGTH characters.
+   LENGTH is -1 if the string is nul terminated.  Each character is WIDTH bytes
+   long.  Printing stops early if the number hits print_max; repeat counts are
+   printed as appropriate.  Print ellipses at the end if we had to stop before
+   printing LENGTH characters, or if FORCE_ELLIPSES.  */
+
+void
+c_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  register unsigned int i;
+  unsigned int things_printed = 0;
+  int in_quotes = 0;
+  int need_comma = 0;
+  extern int inspect_it;
+  extern int repeat_count_threshold;
+  extern int print_max;
+
+  /* If the string was not truncated due to `set print elements', and
+     the last byte of it is a null, we don't print that, in traditional C
+     style.  */
+  if (!force_ellipses
+      && length > 0
+      && extract_unsigned_integer (string + (length - 1) * width, width) == '\0')
+    length--;
+
+  if (length == 0)
+    {
+      fputs_filtered ("\"\"", stream);
+      return;
+    }
+
+  for (i = 0; i < length && things_printed < print_max; ++i)
+    {
+      /* Position of the character we are examining
+	 to see whether it is repeated.  */
+      unsigned int rep1;
+      /* Number of repetitions we have detected so far.  */
+      unsigned int reps;
+      unsigned long current_char;
+
+      QUIT;
+
+      if (need_comma)
+	{
+	  fputs_filtered (", ", stream);
+	  need_comma = 0;
+	}
+
+      current_char = extract_unsigned_integer (string + i * width, width);
+
+      rep1 = i + 1;
+      reps = 1;
+      while (rep1 < length
+	     && extract_unsigned_integer (string + rep1 * width, width)
+	        == current_char)
+	{
+	  ++rep1;
+	  ++reps;
+	}
+
+      if (reps > repeat_count_threshold)
+	{
+	  if (in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\\", ", stream);
+	      else
+		fputs_filtered ("\", ", stream);
+	      in_quotes = 0;
+	    }
+	  LA_PRINT_CHAR (current_char, stream);
+	  fprintf_filtered (stream, " <repeats %u times>", reps);
+	  i = rep1 - 1;
+	  things_printed += repeat_count_threshold;
+	  need_comma = 1;
+	}
+      else
+	{
+	  if (!in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\\"", stream);
+	      else
+		fputs_filtered ("\"", stream);
+	      in_quotes = 1;
+	    }
+	  LA_EMIT_CHAR (current_char, stream, '"');
+	  ++things_printed;
+	}
+    }
+
+  /* Terminate the quotes if necessary.  */
+  if (in_quotes)
+    {
+      if (inspect_it)
+	fputs_filtered ("\\\"", stream);
+      else
+	fputs_filtered ("\"", stream);
+    }
+
+  if (force_ellipses || i < length)
+    fputs_filtered ("...", stream);
+}
+
+/* Create a fundamental C type using default reasonable for the current
+   target machine.
+
+   Some object/debugging file formats (DWARF version 1, COFF, etc) do not
+   define fundamental types such as "int" or "double".  Others (stabs or
+   DWARF version 2, etc) do define fundamental types.  For the formats which
+   don't provide fundamental types, gdb can create such types using this
+   function.
+
+   FIXME:  Some compilers distinguish explicitly signed integral types
+   (signed short, signed int, signed long) from "regular" integral types
+   (short, int, long) in the debugging information.  There is some dis-
+   agreement as to how useful this feature is.  In particular, gcc does
+   not support this.  Also, only some debugging formats allow the
+   distinction to be passed on to a debugger.  For now, we always just
+   use "short", "int", or "long" as the type name, for both the implicit
+   and explicitly signed types.  This also makes life easier for the
+   gdb test suite since we don't have to account for the differences
+   in output depending upon what the compiler and debugging format
+   support.  We will probably have to re-examine the issue when gdb
+   starts taking it's fundamental type information directly from the
+   debugging information supplied by the compiler.  fnf@cygnus.com */
+
+struct type *
+c_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  register struct type *type = NULL;
+
+  switch (typeid)
+    {
+      default:
+	/* FIXME:  For now, if we are asked to produce a type not in this
+	   language, create the equivalent of a C integer type with the
+	   name "<?type?>".  When all the dust settles from the type
+	   reconstruction work, this should probably become an error. */
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "<?type?>", objfile);
+        warning ("internal error: no C/C++ fundamental type %d", typeid);
+	break;
+      case FT_VOID:
+	type = init_type (TYPE_CODE_VOID,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "void", objfile);
+	break;
+      case FT_BOOLEAN:
+        type = init_type (TYPE_CODE_BOOL,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+                          0, "bool", objfile);
+                          
+        break;
+      case FT_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "char", objfile);
+        TYPE_FLAGS (type) |= TYPE_FLAG_NOSIGN;
+	break;
+      case FT_SIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "signed char", objfile);
+	break;
+      case FT_UNSIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned char", objfile);
+	break;
+      case FT_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  0, "short", objfile);
+	break;
+      case FT_SIGNED_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  0, "short", objfile);	/* FIXME-fnf */
+	break;
+      case FT_UNSIGNED_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned short", objfile);
+	break;
+      case FT_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "int", objfile);
+	break;
+      case FT_SIGNED_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "int", objfile); /* FIXME -fnf */
+	break;
+      case FT_UNSIGNED_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned int", objfile);
+	break;
+      case FT_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long", objfile);
+	break;
+      case FT_SIGNED_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long", objfile); /* FIXME -fnf */
+	break;
+      case FT_UNSIGNED_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned long", objfile);
+	break;
+      case FT_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long long", objfile);
+	break;
+      case FT_SIGNED_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "signed long long", objfile);
+	break;
+      case FT_UNSIGNED_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned long long", objfile);
+	break;
+      case FT_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+			  0, "float", objfile);
+	break;
+      case FT_DBL_PREC_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "double", objfile);
+	break;
+      case FT_EXT_PREC_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "long double", objfile);
+        break;
+      case FT_TEMPLATE_ARG:
+        type = init_type (TYPE_CODE_TEMPLATE_ARG,
+			  0,
+		          0, "<template arg>", objfile);
+
+	break;
+      }
+  return (type);
+}
+
+
+/* Table mapping opcodes into strings for printing operators
+   and precedences of the operators.  */
+
+const struct op_print c_op_print_tab[] =
+  {
+    {",",  BINOP_COMMA, PREC_COMMA, 0},
+    {"=",  BINOP_ASSIGN, PREC_ASSIGN, 1},
+    {"||", BINOP_LOGICAL_OR, PREC_LOGICAL_OR, 0},
+    {"&&", BINOP_LOGICAL_AND, PREC_LOGICAL_AND, 0},
+    {"|",  BINOP_BITWISE_IOR, PREC_BITWISE_IOR, 0},
+    {"^",  BINOP_BITWISE_XOR, PREC_BITWISE_XOR, 0},
+    {"&",  BINOP_BITWISE_AND, PREC_BITWISE_AND, 0},
+    {"==", BINOP_EQUAL, PREC_EQUAL, 0},
+    {"!=", BINOP_NOTEQUAL, PREC_EQUAL, 0},
+    {"<=", BINOP_LEQ, PREC_ORDER, 0},
+    {">=", BINOP_GEQ, PREC_ORDER, 0},
+    {">",  BINOP_GTR, PREC_ORDER, 0},
+    {"<",  BINOP_LESS, PREC_ORDER, 0},
+    {">>", BINOP_RSH, PREC_SHIFT, 0},
+    {"<<", BINOP_LSH, PREC_SHIFT, 0},
+    {"+",  BINOP_ADD, PREC_ADD, 0},
+    {"-",  BINOP_SUB, PREC_ADD, 0},
+    {"*",  BINOP_MUL, PREC_MUL, 0},
+    {"/",  BINOP_DIV, PREC_MUL, 0},
+    {"%",  BINOP_REM, PREC_MUL, 0},
+    {"@",  BINOP_REPEAT, PREC_REPEAT, 0},
+    {"-",  UNOP_NEG, PREC_PREFIX, 0},
+    {"!",  UNOP_LOGICAL_NOT, PREC_PREFIX, 0},
+    {"~",  UNOP_COMPLEMENT, PREC_PREFIX, 0},
+    {"*",  UNOP_IND, PREC_PREFIX, 0},
+    {"&",  UNOP_ADDR, PREC_PREFIX, 0},
+    {"sizeof ", UNOP_SIZEOF, PREC_PREFIX, 0},
+    {"++", UNOP_PREINCREMENT, PREC_PREFIX, 0},
+    {"--", UNOP_PREDECREMENT, PREC_PREFIX, 0},
+    /* C++  */
+    {"::", BINOP_SCOPE, PREC_PREFIX, 0},
+    {NULL, 0, 0, 0}
+};
+
+struct type ** CONST_PTR (c_builtin_types[]) = 
+{
+  &builtin_type_int,
+  &builtin_type_long,
+  &builtin_type_short,
+  &builtin_type_char,
+  &builtin_type_float,
+  &builtin_type_double,
+  &builtin_type_void,
+  &builtin_type_long_long,
+  &builtin_type_signed_char,
+  &builtin_type_unsigned_char,
+  &builtin_type_unsigned_short,
+  &builtin_type_unsigned_int,
+  &builtin_type_unsigned_long,
+  &builtin_type_unsigned_long_long,
+  &builtin_type_long_double,
+  &builtin_type_complex,
+  &builtin_type_double_complex,
+  0
+};
+
+const struct language_defn c_language_defn = {
+  "c",				/* Language name */
+  language_c,
+  c_builtin_types,
+  range_check_off,
+  type_check_off,
+  c_parse,
+  c_error,
+  evaluate_subexp_standard,
+  c_printchar,			/* Print a character constant */
+  c_printstr,			/* Function to print string constant */
+  c_emit_char,			/* Print a single char */
+  c_create_fundamental_type,	/* Create fundamental type in this language */
+  c_print_type,			/* Print a type using appropriate syntax */
+  c_val_print,			/* Print a value using appropriate syntax */
+  c_value_print,		/* Print a top-level value */
+  {"",     "",    "",  ""},	/* Binary format info */
+  {"0%lo",  "0",   "o", ""},	/* Octal format info */
+  {"%ld",   "",    "d", ""},	/* Decimal format info */
+  {"0x%lx", "0x",  "x", ""},	/* Hex format info */
+  c_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+struct type ** const (cplus_builtin_types[]) = 
+{
+  &builtin_type_int,
+  &builtin_type_long,
+  &builtin_type_short,
+  &builtin_type_char,
+  &builtin_type_float,
+  &builtin_type_double,
+  &builtin_type_void,
+  &builtin_type_long_long,
+  &builtin_type_signed_char,
+  &builtin_type_unsigned_char,
+  &builtin_type_unsigned_short,
+  &builtin_type_unsigned_int,
+  &builtin_type_unsigned_long,
+  &builtin_type_unsigned_long_long,
+  &builtin_type_long_double,
+  &builtin_type_complex,
+  &builtin_type_double_complex,
+  &builtin_type_bool,
+  0
+};
+
+const struct language_defn cplus_language_defn = {
+  "c++",				/* Language name */
+  language_cplus,
+  cplus_builtin_types,
+  range_check_off,
+  type_check_off,
+  c_parse,
+  c_error,
+  evaluate_subexp_standard,
+  c_printchar,			/* Print a character constant */
+  c_printstr,			/* Function to print string constant */
+  c_emit_char,			/* Print a single char */
+  c_create_fundamental_type,	/* Create fundamental type in this language */
+  c_print_type,			/* Print a type using appropriate syntax */
+  c_val_print,			/* Print a value using appropriate syntax */
+  c_value_print,		/* Print a top-level value */
+  {"",      "",    "",   ""},	/* Binary format info */
+  {"0%lo",   "0",   "o",  ""},	/* Octal format info */
+  {"%ld",    "",    "d",  ""},	/* Decimal format info */
+  {"0x%lx",  "0x",  "x",  ""},	/* Hex format info */
+  c_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+const struct language_defn asm_language_defn = {
+  "asm",			/* Language name */
+  language_asm,
+  c_builtin_types,
+  range_check_off,
+  type_check_off,
+  c_parse,
+  c_error,
+  evaluate_subexp_standard,
+  c_printchar,			/* Print a character constant */
+  c_printstr,			/* Function to print string constant */
+  c_emit_char,			/* Print a single char */
+  c_create_fundamental_type,	/* Create fundamental type in this language */
+  c_print_type,			/* Print a type using appropriate syntax */
+  c_val_print,			/* Print a value using appropriate syntax */
+  c_value_print,		/* Print a top-level value */
+  {"",     "",    "",  ""},	/* Binary format info */
+  {"0%lo",  "0",   "o", ""},	/* Octal format info */
+  {"%ld",   "",    "d", ""},	/* Decimal format info */
+  {"0x%lx", "0x",  "x", ""},	/* Hex format info */
+  c_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+void
+_initialize_c_language ()
+{
+  add_language (&c_language_defn);
+  add_language (&cplus_language_defn);
+  add_language (&asm_language_defn);
+}
diff --git a/gdb/c-lang.h b/gdb/c-lang.h
new file mode 100644
index 0000000..28486fd
--- /dev/null
+++ b/gdb/c-lang.h
@@ -0,0 +1,87 @@
+/* C language support definitions for GDB, the GNU debugger.
+   Copyright 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#if !defined (C_LANG_H)
+#define C_LANG_H 1
+
+#include "value.h"
+
+
+extern int
+c_parse PARAMS ((void));	/* Defined in c-exp.y */
+
+extern void
+c_error PARAMS ((char *));	/* Defined in c-exp.y */
+
+extern void			/* Defined in c-typeprint.c */
+c_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+extern int
+c_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *, int, int,
+		     int, enum val_prettyprint));
+
+extern int
+c_value_print PARAMS ((struct value *, GDB_FILE *, int, enum val_prettyprint));
+
+/* These are in c-lang.c: */
+
+extern void c_printchar PARAMS ((int, GDB_FILE*));
+
+extern void c_printstr PARAMS ((GDB_FILE *stream, char *string,
+				unsigned int length, int width,
+				int force_ellipses));
+
+extern struct type * c_create_fundamental_type PARAMS ((struct objfile*, int));
+
+extern struct type ** CONST_PTR (c_builtin_types[]);
+
+/* These are in c-typeprint.c: */
+
+extern void
+c_type_print_base PARAMS ((struct type *, GDB_FILE *, int, int));
+
+extern void
+c_type_print_varspec_prefix PARAMS ((struct type *, GDB_FILE *, int, int));
+
+/* These are in cp-valprint.c */
+
+extern int vtblprint;		/* Controls printing of vtbl's */
+
+extern int static_field_print;
+
+extern void
+cp_print_class_member PARAMS ((char *, struct type *, GDB_FILE *, char *));
+
+extern void
+cp_print_class_method PARAMS ((char *, struct type *, GDB_FILE *));
+
+extern void
+cp_print_value_fields PARAMS ((struct type *, struct type *, char *, int, CORE_ADDR,
+			       GDB_FILE *, int, int, enum val_prettyprint,
+			       struct type**, int));
+
+extern int
+cp_is_vtbl_ptr_type PARAMS ((struct type *));
+
+extern int
+cp_is_vtbl_member PARAMS ((struct type *));
+
+
+#endif	/* !defined (C_LANG_H) */
diff --git a/gdb/c-typeprint.c b/gdb/c-typeprint.c
new file mode 100644
index 0000000..e155503
--- /dev/null
+++ b/gdb/c-typeprint.c
@@ -0,0 +1,1089 @@
+/* Support for printing C and C++ types for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1993, 1994, 1995, 1996, 1998, 1999
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bfd.h"		/* Binary File Description */
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "demangle.h"
+#include "c-lang.h"
+#include "typeprint.h"
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <ctype.h>
+
+/* Flag indicating target was compiled by HP compiler */
+extern int hp_som_som_object_present;
+
+static void
+c_type_print_args PARAMS ((struct type *, GDB_FILE *));
+
+static void
+cp_type_print_derivation_info PARAMS ((GDB_FILE *, struct type *));
+
+void
+c_type_print_varspec_prefix PARAMS ((struct type *, GDB_FILE *, int, int));
+
+static void
+c_type_print_cv_qualifier PARAMS ((struct type *, GDB_FILE *, int, int));
+
+
+
+/* Print a description of a type in the format of a 
+   typedef for the current language.
+   NEW is the new name for a type TYPE. */
+
+void
+c_typedef_print (type, new, stream)
+   struct type *type;
+   struct symbol *new;
+   GDB_FILE *stream;
+{
+  CHECK_TYPEDEF (type);
+   switch (current_language->la_language)
+   {
+#ifdef _LANG_c
+   case language_c:
+   case language_cplus:
+      fprintf_filtered(stream, "typedef ");
+      type_print(type,"",stream,0);
+      if(TYPE_NAME ((SYMBOL_TYPE (new))) == 0
+	 || !STREQ (TYPE_NAME ((SYMBOL_TYPE (new))), SYMBOL_NAME (new)))
+	fprintf_filtered(stream,  " %s", SYMBOL_SOURCE_NAME(new));
+      break;
+#endif
+#ifdef _LANG_m2
+   case language_m2:
+      fprintf_filtered(stream, "TYPE ");
+      if(!TYPE_NAME(SYMBOL_TYPE(new)) ||
+	 !STREQ (TYPE_NAME(SYMBOL_TYPE(new)), SYMBOL_NAME(new)))
+	fprintf_filtered(stream, "%s = ", SYMBOL_SOURCE_NAME(new));
+      else
+	 fprintf_filtered(stream, "<builtin> = ");
+      type_print(type,"",stream,0);
+      break;
+#endif
+#ifdef _LANG_chill
+   case language_chill:
+      fprintf_filtered(stream, "SYNMODE ");
+      if(!TYPE_NAME(SYMBOL_TYPE(new)) ||
+	 !STREQ (TYPE_NAME(SYMBOL_TYPE(new)), SYMBOL_NAME(new)))
+	fprintf_filtered(stream, "%s = ", SYMBOL_SOURCE_NAME(new));
+      else
+	 fprintf_filtered(stream, "<builtin> = ");
+      type_print(type,"",stream,0);
+      break;
+#endif
+   default:
+      error("Language not supported.");
+   }
+   fprintf_filtered(stream, ";\n");
+}
+
+
+/* LEVEL is the depth to indent lines by.  */
+
+void
+c_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  register enum type_code code;
+  int demangled_args;
+
+  if (show > 0)
+    CHECK_TYPEDEF (type);
+
+  c_type_print_base (type, stream, show, level);
+  code = TYPE_CODE (type);
+  if ((varstring != NULL && *varstring != '\0')
+      ||
+      /* Need a space if going to print stars or brackets;
+	 but not if we will print just a type name.  */
+      ((show > 0 || TYPE_NAME (type) == 0)
+       &&
+       (code == TYPE_CODE_PTR || code == TYPE_CODE_FUNC
+	|| code == TYPE_CODE_METHOD
+	|| code == TYPE_CODE_ARRAY
+	|| code == TYPE_CODE_MEMBER
+	|| code == TYPE_CODE_REF)))
+    fputs_filtered (" ", stream);
+  c_type_print_varspec_prefix (type, stream, show, 0);
+
+  if (varstring != NULL)
+    {
+      fputs_filtered (varstring, stream);
+
+      /* For demangled function names, we have the arglist as part of the name,
+	 so don't print an additional pair of ()'s */
+
+      demangled_args = strchr(varstring, '(') != NULL;
+      c_type_print_varspec_suffix (type, stream, show, 0, demangled_args);
+    }
+}
+  
+/* If TYPE is a derived type, then print out derivation information.
+   Print only the actual base classes of this type, not the base classes
+   of the base classes.  I.E.  for the derivation hierarchy:
+
+	class A { int a; };
+	class B : public A {int b; };
+	class C : public B {int c; };
+
+   Print the type of class C as:
+
+   	class C : public B {
+		int c;
+	}
+
+   Not as the following (like gdb used to), which is not legal C++ syntax for
+   derived types and may be confused with the multiple inheritance form:
+
+	class C : public B : public A {
+		int c;
+	}
+
+   In general, gdb should try to print the types as closely as possible to
+   the form that they appear in the source code. 
+   Note that in case of protected derivation gcc will not say 'protected' 
+   but 'private'. The HP's aCC compiler emits specific information for 
+   derivation via protected inheritance, so gdb can print it out */
+
+static void
+cp_type_print_derivation_info (stream, type)
+     GDB_FILE *stream;
+     struct type *type;
+{
+  char *name;
+  int i;
+
+  for (i = 0; i < TYPE_N_BASECLASSES (type); i++)
+    {
+      fputs_filtered (i == 0 ? ": " : ", ", stream);
+      fprintf_filtered (stream, "%s%s ",
+			BASETYPE_VIA_PUBLIC (type, i) ? "public" 
+			: (TYPE_FIELD_PROTECTED (type, i) ? "protected" : "private"),
+			BASETYPE_VIA_VIRTUAL(type, i) ? " virtual" : "");
+      name = type_name_no_tag (TYPE_BASECLASS (type, i));
+      fprintf_filtered (stream, "%s", name ? name : "(null)");
+    }
+  if (i > 0)
+    {
+      fputs_filtered (" ", stream);
+    }
+}
+/* Print the C++ method arguments ARGS to the file STREAM.  */
+ 
+void
+cp_type_print_method_args (args, prefix, varstring, staticp, stream)
+     struct type **args;
+     char *prefix;
+     char *varstring;
+     int staticp;
+     GDB_FILE *stream;
+{
+  int i;
+ 
+  fprintf_symbol_filtered (stream, prefix, language_cplus, DMGL_ANSI);
+  fprintf_symbol_filtered (stream, varstring, language_cplus, DMGL_ANSI);
+  fputs_filtered ("(", stream);
+  if (args && args[!staticp] && args[!staticp]->code != TYPE_CODE_VOID)
+    {
+      i = !staticp;             /* skip the class variable */
+      while (1)
+        {
+          type_print (args[i++], "", stream, 0);
+          if (!args[i])
+            {
+              fprintf_filtered (stream, " ...");
+              break;
+            }
+          else if (args[i]->code != TYPE_CODE_VOID)
+            {
+              fprintf_filtered (stream, ", ");
+            }
+          else break;
+        }
+    }
+  else if (current_language->la_language == language_cplus)
+    {
+      fprintf_filtered (stream, "void");
+    }
+ 
+  fprintf_filtered (stream, ")");
+}
+
+
+/* Print any asterisks or open-parentheses needed before the
+   variable name (to describe its type).
+
+   On outermost call, pass 0 for PASSED_A_PTR.
+   On outermost call, SHOW > 0 means should ignore
+   any typename for TYPE and show its details.
+   SHOW is always zero on recursive calls.  */
+
+void
+c_type_print_varspec_prefix (type, stream, show, passed_a_ptr)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int passed_a_ptr;
+{
+  char *name;
+  if (type == 0)
+    return;
+
+  if (TYPE_NAME (type) && show <= 0)
+    return;
+
+  QUIT;
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_PTR:
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 1);
+      fprintf_filtered (stream, "*");
+      c_type_print_cv_qualifier (type, stream, 1, 0);
+      break;
+
+    case TYPE_CODE_MEMBER:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, "(");
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      fprintf_filtered (stream, " ");
+      name = type_name_no_tag (TYPE_DOMAIN_TYPE (type));
+      if (name)
+	fputs_filtered (name, stream);
+      else
+        c_type_print_base (TYPE_DOMAIN_TYPE (type), stream, 0, passed_a_ptr);
+      fprintf_filtered (stream, "::");
+      break;
+
+    case TYPE_CODE_METHOD:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, "(");
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      if (passed_a_ptr)
+	{
+	  fprintf_filtered (stream, " ");
+	  c_type_print_base (TYPE_DOMAIN_TYPE (type), stream, 0, passed_a_ptr);
+	  fprintf_filtered (stream, "::");
+	}
+      break;
+
+    case TYPE_CODE_REF:
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 1);
+      fprintf_filtered (stream, "&");
+      c_type_print_cv_qualifier (type, stream, 1, 0);
+      break;
+
+    case TYPE_CODE_FUNC:
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      if (passed_a_ptr)
+	fprintf_filtered (stream, "(");
+      break;
+
+    case TYPE_CODE_ARRAY:
+      c_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      if (passed_a_ptr)
+	fprintf_filtered (stream, "(");
+      break;
+
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_RANGE:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_COMPLEX:
+    case TYPE_CODE_TYPEDEF:
+      /* These types need no prefix.  They are listed here so that
+	 gcc -Wall will reveal any types that haven't been handled.  */
+      break;
+    }
+}
+
+/* Print out "const" and "volatile" attributes.
+   TYPE is a pointer to the type being printed out.
+   STREAM is the output destination.
+   NEED_SPACE = 1 indicates an initial white space is needed */
+
+static void
+c_type_print_cv_qualifier (type, stream, need_pre_space, need_post_space)
+  struct type *type;
+  GDB_FILE *stream;
+  int need_pre_space;
+  int need_post_space;
+{
+  int flag = 0;
+  
+  if (TYPE_CONST (type))
+    {
+      if (need_pre_space)
+        fprintf_filtered (stream, " ");
+      fprintf_filtered (stream, "const");
+      flag = 1;
+    }
+  
+  if (TYPE_VOLATILE (type))
+    {
+      if (flag || need_pre_space)
+        fprintf_filtered (stream, " ");
+      fprintf_filtered (stream, "volatile");
+      flag = 1;
+    }
+
+  if (flag && need_post_space)
+    fprintf_filtered (stream, " ");
+}
+
+
+
+
+static void
+c_type_print_args (type, stream)
+     struct type *type;
+     GDB_FILE *stream;
+{
+  int i;
+  struct type **args;
+
+  fprintf_filtered (stream, "(");
+  args = TYPE_ARG_TYPES (type);
+  if (args != NULL)
+    {
+      if (args[1] == NULL)
+	{
+	  fprintf_filtered (stream, "...");
+	}
+      else if ((args[1]->code == TYPE_CODE_VOID) &&
+               (current_language->la_language == language_cplus))
+        {
+          fprintf_filtered (stream, "void");
+        }
+      else
+	{
+	  for (i = 1;
+	       args[i] != NULL && args[i]->code != TYPE_CODE_VOID;
+	       i++)
+	    {
+	      c_print_type (args[i], "", stream, -1, 0);
+	      if (args[i+1] == NULL)
+		{
+		  fprintf_filtered (stream, "...");
+		}
+	      else if (args[i+1]->code != TYPE_CODE_VOID)
+		{
+		  fprintf_filtered (stream, ",");
+		  wrap_here ("    ");
+		}
+	    }
+	}
+    }
+  else if (current_language->la_language == language_cplus)
+    {
+      fprintf_filtered (stream, "void");
+    }
+  
+  fprintf_filtered (stream, ")");
+}
+
+/* Print any array sizes, function arguments or close parentheses
+   needed after the variable name (to describe its type).
+   Args work like c_type_print_varspec_prefix.  */
+
+void
+c_type_print_varspec_suffix (type, stream, show, passed_a_ptr, demangled_args)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int passed_a_ptr;
+     int demangled_args;
+{
+  if (type == 0)
+    return;
+
+  if (TYPE_NAME (type) && show <= 0)
+    return;
+
+  QUIT;
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_ARRAY:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, ")");
+      
+      fprintf_filtered (stream, "[");
+      if (TYPE_LENGTH (type) >= 0 && TYPE_LENGTH (TYPE_TARGET_TYPE (type)) > 0
+	  && TYPE_ARRAY_UPPER_BOUND_TYPE(type) != BOUND_CANNOT_BE_DETERMINED)
+	fprintf_filtered (stream, "%d",
+			  (TYPE_LENGTH (type)
+			   / TYPE_LENGTH (TYPE_TARGET_TYPE (type))));
+      fprintf_filtered (stream, "]");
+      
+      c_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 0, 0);
+      break;
+
+    case TYPE_CODE_MEMBER:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, ")");
+      c_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 0, 0);
+      break;
+
+    case TYPE_CODE_METHOD:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, ")");
+      c_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 0, 0);
+      if (passed_a_ptr)
+	{
+	  c_type_print_args (type, stream);
+	}
+      break;
+
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_REF:
+      c_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 1, 0);
+      break;
+
+    case TYPE_CODE_FUNC:
+      if (passed_a_ptr)
+	fprintf_filtered (stream, ")");
+      if (!demangled_args)
+	{ int i, len = TYPE_NFIELDS (type);
+	  fprintf_filtered (stream, "(");
+          if ((len == 0) && (current_language->la_language == language_cplus))
+            {
+              fprintf_filtered (stream, "void");
+            }
+          else
+            for (i = 0; i < len; i++)
+              {
+                if (i > 0)
+                  {
+                    fputs_filtered (", ", stream);
+                    wrap_here ("    ");
+                  }
+                c_print_type (TYPE_FIELD_TYPE (type, i), "", stream, -1, 0);
+              }
+	  fprintf_filtered (stream, ")");
+	}
+      c_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0,
+				   passed_a_ptr, 0);
+      break;
+
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_RANGE:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_COMPLEX:
+    case TYPE_CODE_TYPEDEF:
+      /* These types do not need a suffix.  They are listed so that
+	 gcc -Wall will report types that may not have been considered.  */
+      break;
+    }
+}
+
+/* Print the name of the type (or the ultimate pointer target,
+   function value or array element), or the description of a
+   structure or union.
+
+   SHOW positive means print details about the type (e.g. enum values),
+   and print structure elements passing SHOW - 1 for show.
+   SHOW negative means just print the type name or struct tag if there is one.
+   If there is no name, print something sensible but concise like
+   "struct {...}".
+   SHOW zero means just print the type name or struct tag if there is one.
+   If there is no name, print something sensible but not as concise like
+   "struct {int x; int y;}".
+
+   LEVEL is the number of spaces to indent by.
+   We increase it for some recursive calls.  */
+
+void
+c_type_print_base (type, stream, show, level)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  register int i;
+  register int len;
+  register int lastval;
+  char *mangled_name;
+  char *demangled_name;
+  char *demangled_no_static;
+  enum {s_none, s_public, s_private, s_protected} section_type;
+  int need_access_label = 0;
+  int j, len2;
+
+  QUIT;
+
+  wrap_here ("    ");
+  if (type == NULL)
+    {
+      fputs_filtered ("<type unknown>", stream);
+      return;
+    }
+
+  /* When SHOW is zero or less, and there is a valid type name, then always
+     just print the type name directly from the type.  */
+  /* If we have "typedef struct foo {. . .} bar;" do we want to print it
+     as "struct foo" or as "bar"?  Pick the latter, because C++ folk tend
+     to expect things like "class5 *foo" rather than "struct class5 *foo".  */
+
+  if (show <= 0
+      && TYPE_NAME (type) != NULL)
+    {
+      c_type_print_cv_qualifier (type, stream, 0, 1);
+      fputs_filtered (TYPE_NAME (type), stream);
+      return;
+    }
+
+  CHECK_TYPEDEF (type);
+	  
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_TYPEDEF:
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_REF:
+    case TYPE_CODE_FUNC:
+    case TYPE_CODE_METHOD:
+      c_type_print_base (TYPE_TARGET_TYPE (type), stream, show, level);
+      break;
+
+    case TYPE_CODE_STRUCT:
+      c_type_print_cv_qualifier (type, stream, 0, 1);
+      /* Note TYPE_CODE_STRUCT and TYPE_CODE_CLASS have the same value,
+       * so we use another means for distinguishing them.
+       */
+      if (HAVE_CPLUS_STRUCT (type)) {
+        switch (TYPE_DECLARED_TYPE(type)) {
+          case DECLARED_TYPE_CLASS:
+	    fprintf_filtered (stream, "class ");
+            break;
+          case DECLARED_TYPE_UNION:
+            fprintf_filtered (stream, "union ");
+            break;
+          case DECLARED_TYPE_STRUCT:
+            fprintf_filtered (stream, "struct ");
+            break;
+          default:
+            /* If there is a CPLUS_STRUCT, assume class if not
+             * otherwise specified in the declared_type field.
+             */
+	    fprintf_filtered (stream, "class ");
+            break;
+        } /* switch */
+      } else {
+        /* If not CPLUS_STRUCT, then assume it's a C struct */ 
+        fprintf_filtered (stream, "struct ");
+      }
+      goto struct_union;
+
+    case TYPE_CODE_UNION:
+      c_type_print_cv_qualifier (type, stream, 0, 1);
+      fprintf_filtered (stream, "union ");
+
+    struct_union:
+
+      /* Print the tag if it exists. 
+       * The HP aCC compiler emits
+       * a spurious "{unnamed struct}"/"{unnamed union}"/"{unnamed enum}"
+       * tag  for unnamed struct/union/enum's, which we don't
+       * want to print.
+       */
+      if (TYPE_TAG_NAME (type) != NULL &&
+          strncmp(TYPE_TAG_NAME(type), "{unnamed", 8))
+	{
+	  fputs_filtered (TYPE_TAG_NAME (type), stream);
+	  if (show > 0)
+	    fputs_filtered (" ", stream);
+	}
+      wrap_here ("    ");
+      if (show < 0)
+	{
+	  /* If we just printed a tag name, no need to print anything else.  */
+	  if (TYPE_TAG_NAME (type) == NULL)
+	    fprintf_filtered (stream, "{...}");
+	}
+      else if (show > 0 || TYPE_TAG_NAME (type) == NULL)
+	{
+	  cp_type_print_derivation_info (stream, type);
+	  
+	  fprintf_filtered (stream, "{\n");
+	  if ((TYPE_NFIELDS (type) == 0) && (TYPE_NFN_FIELDS (type) == 0))
+	    {
+	      if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
+		fprintfi_filtered (level + 4, stream, "<incomplete type>\n");
+	      else
+		fprintfi_filtered (level + 4, stream, "<no data fields>\n");
+	    }
+
+	  /* Start off with no specific section type, so we can print
+	     one for the first field we find, and use that section type
+	     thereafter until we find another type. */
+
+	  section_type = s_none;
+
+          /* For a class, if all members are private, there's no need
+             for a "private:" label; similarly, for a struct or union
+             masquerading as a class, if all members are public, there's
+             no need for a "public:" label. */ 
+
+          if ((TYPE_DECLARED_TYPE (type) == DECLARED_TYPE_CLASS) ||
+               (TYPE_DECLARED_TYPE (type) == DECLARED_TYPE_TEMPLATE))
+            {
+              QUIT;
+              len = TYPE_NFIELDS (type);
+              for (i = TYPE_N_BASECLASSES (type); i < len; i++)
+                if (!TYPE_FIELD_PRIVATE (type, i))
+                  {
+                    need_access_label = 1;
+                    break;
+                  }
+              QUIT;
+              if (!need_access_label)
+                {
+                  len2 = TYPE_NFN_FIELDS (type);
+                  for (j = 0; j < len2; j++)
+                    {
+                      len = TYPE_FN_FIELDLIST_LENGTH (type, j);
+                      for (i = 0; i < len; i++)
+                        if (!TYPE_FN_FIELD_PRIVATE (TYPE_FN_FIELDLIST1 (type, j), i))
+                          {
+                            need_access_label = 1;
+                            break;
+                          }
+                      if (need_access_label)
+                        break;
+                    }
+                }
+            }
+          else if ((TYPE_DECLARED_TYPE (type) == DECLARED_TYPE_STRUCT) ||
+                   (TYPE_DECLARED_TYPE (type) == DECLARED_TYPE_UNION))
+            {
+              QUIT;
+              len = TYPE_NFIELDS (type);
+              for (i = TYPE_N_BASECLASSES (type); i < len; i++)
+                if (TYPE_FIELD_PRIVATE (type, i) || TYPE_FIELD_PROTECTED (type, i))
+                  {
+                    need_access_label = 1;
+                    break;
+                  }
+              QUIT;
+              if (!need_access_label)
+                {
+                  len2 = TYPE_NFN_FIELDS (type);
+                  for (j = 0; j < len2; j++)
+                    {
+                      QUIT;
+                      len = TYPE_FN_FIELDLIST_LENGTH (type, j);
+                      for (i = 0; i < len; i++)
+                        if (TYPE_FN_FIELD_PRIVATE (TYPE_FN_FIELDLIST1 (type, j), i) ||
+                            TYPE_FN_FIELD_PROTECTED (TYPE_FN_FIELDLIST1 (type, j), i))
+                          {
+                            need_access_label = 1;
+                            break;
+                          }
+                      if (need_access_label)
+                        break;
+                    }
+                }
+            }
+
+	  /* If there is a base class for this type,
+	     do not print the field that it occupies.  */
+
+	  len = TYPE_NFIELDS (type);
+	  for (i = TYPE_N_BASECLASSES (type); i < len; i++)
+	    {
+	      QUIT;
+	      /* Don't print out virtual function table.  */
+              /* HP ANSI C++ case */
+              if (TYPE_HAS_VTABLE(type) && (STREQN (TYPE_FIELD_NAME (type, i), "__vfp", 5)))
+                 continue;
+              /* Other compilers */
+              /* pai:: FIXME : check for has_vtable < 0 */
+	      if (STREQN (TYPE_FIELD_NAME (type, i), "_vptr", 5)
+		  && is_cplus_marker ((TYPE_FIELD_NAME (type, i))[5]))
+		continue;
+
+	      /* If this is a C++ class we can print the various C++ section
+		 labels. */
+
+	      if (HAVE_CPLUS_STRUCT (type) && need_access_label)
+		{
+		  if (TYPE_FIELD_PROTECTED (type, i))
+		    {
+		      if (section_type != s_protected)
+			{
+			  section_type = s_protected;
+			  fprintfi_filtered (level + 2, stream,
+					     "protected:\n");
+			}
+		    }
+		  else if (TYPE_FIELD_PRIVATE (type, i))
+		    {
+		      if (section_type != s_private)
+			{
+			  section_type = s_private;
+			  fprintfi_filtered (level + 2, stream, "private:\n");
+			}
+		    }
+		  else
+		    {
+		      if (section_type != s_public)
+			{
+			  section_type = s_public;
+			  fprintfi_filtered (level + 2, stream, "public:\n");
+			}
+		    }
+		}
+
+	      print_spaces_filtered (level + 4, stream);
+	      if (TYPE_FIELD_STATIC (type, i))
+		{
+		  fprintf_filtered (stream, "static ");
+		}
+	      c_print_type (TYPE_FIELD_TYPE (type, i),
+			    TYPE_FIELD_NAME (type, i),
+			    stream, show - 1, level + 4);
+	      if (!TYPE_FIELD_STATIC (type, i)
+		  && TYPE_FIELD_PACKED (type, i))
+		{
+		  /* It is a bitfield.  This code does not attempt
+		     to look at the bitpos and reconstruct filler,
+		     unnamed fields.  This would lead to misleading
+		     results if the compiler does not put out fields
+		     for such things (I don't know what it does).  */
+		  fprintf_filtered (stream, " : %d",
+				    TYPE_FIELD_BITSIZE (type, i));
+		}
+	      fprintf_filtered (stream, ";\n");
+	    }
+
+	  /* If there are both fields and methods, put a space between. */
+	  len = TYPE_NFN_FIELDS (type);
+	  if (len && section_type != s_none)
+	     fprintf_filtered (stream, "\n");
+
+	  /* C++: print out the methods */
+	  for (i = 0; i < len; i++)
+	    {
+	      struct fn_field *f = TYPE_FN_FIELDLIST1 (type, i);
+	      int j, len2 = TYPE_FN_FIELDLIST_LENGTH (type, i);
+	      char *method_name = TYPE_FN_FIELDLIST_NAME (type, i);
+	      char *name = type_name_no_tag (type);
+	      int is_constructor = name && STREQ(method_name, name);
+	      for (j = 0; j < len2; j++)
+		{
+		  char *physname = TYPE_FN_FIELD_PHYSNAME (f, j);
+		  int is_full_physname_constructor = 
+		    ((physname[0] == '_' && physname[1] == '_'
+		      && strchr ("0123456789Qt", physname[2]))
+		     || STREQN (physname, "__ct__", 6)
+		     || DESTRUCTOR_PREFIX_P (physname)
+		     || STREQN (physname, "__dt__", 6));
+
+		  QUIT;
+		  if (TYPE_FN_FIELD_PROTECTED (f, j))
+		    {
+		      if (section_type != s_protected)
+			{
+			  section_type = s_protected;
+			  fprintfi_filtered (level + 2, stream,
+					     "protected:\n");
+			}
+		    }
+		  else if (TYPE_FN_FIELD_PRIVATE (f, j))
+		    {
+		      if (section_type != s_private)
+			{
+			  section_type = s_private;
+			  fprintfi_filtered (level + 2, stream, "private:\n");
+			}
+		    }
+		  else
+		    {
+		      if (section_type != s_public)
+			{
+			  section_type = s_public;
+			  fprintfi_filtered (level + 2, stream, "public:\n");
+			}
+		    }
+
+		  print_spaces_filtered (level + 4, stream);
+		  if (TYPE_FN_FIELD_VIRTUAL_P (f, j))
+		    fprintf_filtered (stream, "virtual ");
+		  else if (TYPE_FN_FIELD_STATIC_P (f, j))
+		    fprintf_filtered (stream, "static ");
+		  if (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)) == 0)
+		    {
+		      /* Keep GDB from crashing here.  */
+		      fprintf_filtered (stream, "<undefined type> %s;\n",
+			       TYPE_FN_FIELD_PHYSNAME (f, j));
+		      break;
+		    }
+		  else if (!is_constructor &&                  /* constructors don't have declared types */
+                           !is_full_physname_constructor &&    /*    " "  */ 
+                           !strstr (method_name, "operator ")) /* Not a type conversion operator */
+                                                               /* (note space -- other operators don't have it) */ 
+		    {
+		      type_print (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)),
+				  "", stream, -1);
+		      fputs_filtered (" ", stream);
+		    }
+		  if (TYPE_FN_FIELD_STUB (f, j))
+		    /* Build something we can demangle.  */
+		    mangled_name = gdb_mangle_name (type, i, j);
+		  else
+		    mangled_name = TYPE_FN_FIELD_PHYSNAME (f, j);
+
+		  demangled_name =
+		    cplus_demangle (mangled_name,
+				    DMGL_ANSI | DMGL_PARAMS);
+		  if (demangled_name == NULL)
+		    {
+		      /* in some cases (for instance with the HP demangling),
+			 if a function has more than 10 arguments, 
+			 the demangling will fail.
+			 Let's try to reconstruct the function signature from 
+			 the symbol information	*/
+		      if (!TYPE_FN_FIELD_STUB (f, j))
+			cp_type_print_method_args (TYPE_FN_FIELD_ARGS (f, j), "",
+						   method_name,
+						   TYPE_FN_FIELD_STATIC_P (f, j),
+						   stream);
+		      else
+			fprintf_filtered (stream, "<badly mangled name '%s'>",
+					  mangled_name);
+		    }
+		  else
+		    {
+		      char *p;
+		      char *demangled_no_class = demangled_name;
+		      
+		      while (p = strchr (demangled_no_class, ':'))
+			{
+			  demangled_no_class = p;
+			  if (*++demangled_no_class == ':')
+			    ++demangled_no_class;
+			}
+		      /* get rid of the static word appended by the demangler */
+		      p = strstr (demangled_no_class, " static");
+		      if (p != NULL)
+			{
+			  int length = p - demangled_no_class;
+			  demangled_no_static = (char *) xmalloc (length + 1);
+			  strncpy (demangled_no_static, demangled_no_class, length);
+                          *(demangled_no_static + length) = '\0';
+			  fputs_filtered (demangled_no_static, stream);
+			  free (demangled_no_static);
+			}
+		      else
+			fputs_filtered (demangled_no_class, stream);
+		      free (demangled_name);
+		    }
+
+		  if (TYPE_FN_FIELD_STUB (f, j))
+		    free (mangled_name);
+
+		  fprintf_filtered (stream, ";\n");
+		}
+	    }
+
+      if (TYPE_LOCALTYPE_PTR (type) && show >= 0)
+        fprintfi_filtered (level, stream, " (Local at %s:%d)\n",
+                           TYPE_LOCALTYPE_FILE (type),
+                           TYPE_LOCALTYPE_LINE (type));
+
+	  fprintfi_filtered (level, stream, "}");
+	}
+      if (TYPE_CODE(type) == TYPE_CODE_TEMPLATE)
+        goto go_back;
+      break;
+
+    case TYPE_CODE_ENUM:
+      c_type_print_cv_qualifier (type, stream, 0, 1);
+      /* HP C supports sized enums */
+      if (hp_som_som_object_present)
+        switch (TYPE_LENGTH (type))
+          {
+            case 1:
+              fputs_filtered ("char ", stream);
+              break;
+            case 2:
+              fputs_filtered ("short ", stream);
+              break;
+            default:
+              break;
+          }
+       fprintf_filtered (stream, "enum ");
+      /* Print the tag name if it exists.
+         The aCC compiler emits a spurious 
+         "{unnamed struct}"/"{unnamed union}"/"{unnamed enum}"
+         tag for unnamed struct/union/enum's, which we don't
+         want to print. */
+      if (TYPE_TAG_NAME (type) != NULL &&
+          strncmp(TYPE_TAG_NAME(type), "{unnamed", 8))
+	{
+	  fputs_filtered (TYPE_TAG_NAME (type), stream);
+	  if (show > 0)
+	    fputs_filtered (" ", stream);
+	}
+
+      wrap_here ("    ");
+      if (show < 0)
+	{
+	  /* If we just printed a tag name, no need to print anything else.  */
+	  if (TYPE_TAG_NAME (type) == NULL)
+	    fprintf_filtered (stream, "{...}");
+	}
+      else if (show > 0 || TYPE_TAG_NAME (type) == NULL)
+	{
+	  fprintf_filtered (stream, "{");
+	  len = TYPE_NFIELDS (type);
+	  lastval = 0;
+	  for (i = 0; i < len; i++)
+	    {
+	      QUIT;
+	      if (i) fprintf_filtered (stream, ", ");
+	      wrap_here ("    ");
+	      fputs_filtered (TYPE_FIELD_NAME (type, i), stream);
+	      if (lastval != TYPE_FIELD_BITPOS (type, i))
+		{
+		  fprintf_filtered (stream, " = %d", TYPE_FIELD_BITPOS (type, i));
+		  lastval = TYPE_FIELD_BITPOS (type, i);
+		}
+	      lastval++;
+	    }
+	  fprintf_filtered (stream, "}");
+	}
+      break;
+
+    case TYPE_CODE_VOID:
+      fprintf_filtered (stream, "void");
+      break;
+
+    case TYPE_CODE_UNDEF:
+      fprintf_filtered (stream, "struct <unknown>");
+      break;
+
+    case TYPE_CODE_ERROR:
+      fprintf_filtered (stream, "<unknown type>");
+      break;
+
+    case TYPE_CODE_RANGE:
+      /* This should not occur */
+      fprintf_filtered (stream, "<range type>");
+      break;
+
+    case TYPE_CODE_TEMPLATE:
+      /* Called on "ptype t" where "t" is a template.
+         Prints the template header (with args), e.g.:
+           template <class T1, class T2> class "
+         and then merges with the struct/union/class code to
+         print the rest of the definition. */
+      c_type_print_cv_qualifier (type, stream, 0, 1);
+      fprintf_filtered (stream, "template <");
+      for (i = 0; i < TYPE_NTEMPLATE_ARGS(type); i++) {
+        struct template_arg templ_arg;
+        templ_arg = TYPE_TEMPLATE_ARG(type, i);
+        fprintf_filtered (stream, "class %s", templ_arg.name);
+        if (i < TYPE_NTEMPLATE_ARGS(type)-1)
+          fprintf_filtered (stream, ", ");
+      }
+      fprintf_filtered (stream, "> class ");
+      /* Yuck, factor this out to a subroutine so we can call
+         it and return to the point marked with the "goback:" label... - RT */
+      goto struct_union; 
+go_back:
+      if (TYPE_NINSTANTIATIONS(type) > 0) {
+        fprintf_filtered (stream, "\ntemplate instantiations:\n");
+        for (i = 0; i < TYPE_NINSTANTIATIONS(type); i++) {
+          fprintf_filtered(stream, "  ");
+          c_type_print_base (TYPE_INSTANTIATION(type, i), stream, 0, level);
+          if (i < TYPE_NINSTANTIATIONS(type)-1) fprintf_filtered(stream, "\n");
+        }
+      }
+      break;
+       
+    default:
+      /* Handle types not explicitly handled by the other cases,
+	 such as fundamental types.  For these, just print whatever
+	 the type name is, as recorded in the type itself.  If there
+	 is no type name, then complain. */
+      if (TYPE_NAME (type) != NULL)
+	{
+          c_type_print_cv_qualifier (type, stream, 0, 1);
+	  fputs_filtered (TYPE_NAME (type), stream);
+	}
+      else
+	{
+	  /* At least for dump_symtab, it is important that this not be
+	     an error ().  */
+	  fprintf_filtered (stream, "<invalid type code %d>",
+			    TYPE_CODE (type));
+	}
+      break;
+    }
+}
+
+
+
+
+
+
+
+
+
diff --git a/gdb/c-valprint.c b/gdb/c-valprint.c
new file mode 100644
index 0000000..7a9c6be
--- /dev/null
+++ b/gdb/c-valprint.c
@@ -0,0 +1,535 @@
+/* Support for printing C values for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "demangle.h"
+#include "valprint.h"
+#include "language.h"
+#include "c-lang.h"
+
+
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+   the inferior at address ADDRESS, onto stdio stream STREAM according to
+   FORMAT (a letter or 0 for natural format).  The data at VALADDR is in
+   target byte order.
+
+   If the data are a string pointer, returns the number of string characters
+   printed.
+
+   If DEREF_REF is nonzero, then dereference references, otherwise just print
+   them like pointers.
+
+   The PRETTY parameter controls prettyprinting.  */
+
+int
+c_val_print (type, valaddr, embedded_offset, address, stream, format, deref_ref, recurse,
+	     pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  register unsigned int i = 0;		/* Number of characters printed */
+  unsigned len;
+  struct type *elttype;
+  unsigned eltlen;
+  LONGEST val;
+  CORE_ADDR addr;
+
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_ARRAY:
+      elttype = check_typedef (TYPE_TARGET_TYPE (type));
+      if (TYPE_LENGTH (type) > 0 && TYPE_LENGTH (TYPE_TARGET_TYPE (type)) > 0)
+	{
+	  eltlen = TYPE_LENGTH (elttype);
+	  len = TYPE_LENGTH (type) / eltlen;
+	  if (prettyprint_arrays)
+	    {
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  /* For an array of chars, print with string syntax.  */
+	  if (eltlen == 1 &&
+	      ((TYPE_CODE (elttype) == TYPE_CODE_INT)
+	       || ((current_language->la_language == language_m2)
+		   && (TYPE_CODE (elttype) == TYPE_CODE_CHAR)))
+	      && (format == 0 || format == 's'))
+	    {
+	      /* If requested, look for the first null char and only print
+		 elements up to it.  */
+	      if (stop_print_at_null)
+		{
+		  int temp_len;
+		  
+		  /* Look for a NULL char. */
+		  for (temp_len = 0;
+		       (valaddr + embedded_offset)[temp_len]
+		       && temp_len < len && temp_len < print_max;
+		       temp_len++);
+		  len = temp_len;
+		}
+	      
+	      LA_PRINT_STRING (stream, valaddr + embedded_offset, len, eltlen, 0);
+	      i = len;
+	    }
+	  else
+	    {
+	      fprintf_filtered (stream, "{");
+	      /* If this is a virtual function table, print the 0th
+		 entry specially, and the rest of the members normally.  */
+	      if (cp_is_vtbl_ptr_type (elttype))
+		{
+		  i = 1;
+		  fprintf_filtered (stream, "%d vtable entries", len - 1);
+		}
+	      else
+		{
+		  i = 0;
+		}
+	      val_print_array_elements (type, valaddr + embedded_offset, address, stream,
+					format, deref_ref, recurse, pretty, i);
+	      fprintf_filtered (stream, "}");
+	    }
+	  break;
+	}
+      /* Array of unspecified length: treat like pointer to first elt.  */
+      addr = address;
+      goto print_unpacked_pointer;
+
+    case TYPE_CODE_PTR:
+      if (format && format != 's')
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	  break;
+	}
+      if (vtblprint && cp_is_vtbl_ptr_type(type))
+	{
+          /* Print the unmangled name if desired.  */
+	  /* Print vtable entry - we only get here if we ARE using
+	     -fvtable_thunks.  (Otherwise, look under TYPE_CODE_STRUCT.) */
+	  print_address_demangle(extract_address (valaddr + embedded_offset, TYPE_LENGTH (type)),
+				 stream, demangle);
+	  break;
+	}
+      elttype = check_typedef (TYPE_TARGET_TYPE (type));
+      if (TYPE_CODE (elttype) == TYPE_CODE_METHOD)
+	{
+	  cp_print_class_method (valaddr + embedded_offset, type, stream);
+	}
+      else if (TYPE_CODE (elttype) == TYPE_CODE_MEMBER)
+	{
+	  cp_print_class_member (valaddr + embedded_offset,
+				 TYPE_DOMAIN_TYPE (TYPE_TARGET_TYPE (type)),
+				 stream, "&");
+	}
+      else
+	{
+	  addr = unpack_pointer (type, valaddr + embedded_offset);
+	print_unpacked_pointer:
+          elttype = check_typedef (TYPE_TARGET_TYPE (type));
+
+	  if (TYPE_CODE (elttype) == TYPE_CODE_FUNC)
+	    {
+	      /* Try to print what function it points to.  */
+	      print_address_demangle (addr, stream, demangle);
+	      /* Return value is irrelevant except for string pointers.  */
+	      return (0);
+	    }
+
+	  if (addressprint && format != 's')
+	    {
+	      print_address_numeric (addr, 1, stream);
+	    }
+
+	  /* For a pointer to char or unsigned char, also print the string
+	     pointed to, unless pointer is null.  */
+	  /* FIXME: need to handle wchar_t here... */
+
+	  if (TYPE_LENGTH (elttype) == 1
+	      && TYPE_CODE (elttype) == TYPE_CODE_INT
+	      && (format == 0 || format == 's')
+	      && addr != 0)
+	    {
+	      i = val_print_string (addr, -1, TYPE_LENGTH (elttype), stream);
+	    }
+	  else if (cp_is_vtbl_member(type))
+  	    {
+	      /* print vtbl's nicely */
+	      CORE_ADDR vt_address = unpack_pointer (type, valaddr + embedded_offset);
+
+	      struct minimal_symbol *msymbol =
+		lookup_minimal_symbol_by_pc (vt_address);
+	      if ((msymbol != NULL) &&
+		  (vt_address == SYMBOL_VALUE_ADDRESS (msymbol)))
+		{
+		  fputs_filtered (" <", stream);
+		  fputs_filtered (SYMBOL_SOURCE_NAME (msymbol), stream);
+		  fputs_filtered (">", stream);
+		}
+	      if (vt_address && vtblprint)
+	        {
+		  value_ptr vt_val;
+	          struct symbol *wsym = (struct symbol *)NULL;
+	          struct type *wtype;
+		  struct symtab *s;
+		  struct block *block = (struct block *)NULL;
+		  int is_this_fld;
+
+		  if (msymbol != NULL)
+              	    wsym = lookup_symbol (SYMBOL_NAME(msymbol), block, 
+				VAR_NAMESPACE, &is_this_fld, &s);
+ 
+		  if (wsym)
+		    {
+	              wtype = SYMBOL_TYPE(wsym);
+		    }
+		  else
+		    {
+		      wtype = TYPE_TARGET_TYPE(type);
+		    }
+		  vt_val = value_at (wtype, vt_address, NULL);
+		  val_print (VALUE_TYPE (vt_val), VALUE_CONTENTS (vt_val), 0,
+			     VALUE_ADDRESS (vt_val), stream, format,
+			     deref_ref, recurse + 1, pretty);
+		  if (pretty)
+		    {
+		      fprintf_filtered (stream, "\n");
+		      print_spaces_filtered (2 + 2 * recurse, stream);
+		    }
+	        }
+	      }
+
+	  /* Return number of characters printed, including the terminating
+	     '\0' if we reached the end.  val_print_string takes care including
+	     the terminating '\0' if necessary.  */
+	  return i;
+	}
+      break;
+
+    case TYPE_CODE_MEMBER:
+      error ("not implemented: member type in c_val_print");
+      break;
+
+    case TYPE_CODE_REF:
+      elttype = check_typedef (TYPE_TARGET_TYPE (type));
+      if (TYPE_CODE (elttype) == TYPE_CODE_MEMBER)
+        {
+	  cp_print_class_member (valaddr + embedded_offset,
+				 TYPE_DOMAIN_TYPE (elttype),
+				 stream, "");
+	  break;
+	}
+      if (addressprint)
+        {
+	  fprintf_filtered (stream, "@");
+	  print_address_numeric
+	    (extract_address (valaddr + embedded_offset,
+			      TARGET_PTR_BIT / HOST_CHAR_BIT), 1, stream);
+	  if (deref_ref)
+	    fputs_filtered (": ", stream);
+        }
+      /* De-reference the reference.  */
+      if (deref_ref)
+	{
+	  if (TYPE_CODE (elttype) != TYPE_CODE_UNDEF)
+	    {
+	      value_ptr deref_val =
+		value_at
+		  (TYPE_TARGET_TYPE (type),
+		   unpack_pointer (lookup_pointer_type (builtin_type_void),
+				   valaddr + embedded_offset),
+		   NULL);
+	      val_print (VALUE_TYPE (deref_val),
+			 VALUE_CONTENTS (deref_val), 
+                         0,
+			 VALUE_ADDRESS (deref_val), 
+                         stream, 
+                         format,
+			 deref_ref, 
+                         recurse, 
+                         pretty);
+	    }
+	  else
+	    fputs_filtered ("???", stream);
+	}
+      break;
+
+    case TYPE_CODE_UNION:
+      if (recurse && !unionprint)
+	{
+	  fprintf_filtered (stream, "{...}");
+	  break;
+	}
+      /* Fall through.  */
+    case TYPE_CODE_STRUCT:
+      if (vtblprint && cp_is_vtbl_ptr_type(type))
+	{
+          /* Print the unmangled name if desired.  */
+	  /* Print vtable entry - we only get here if NOT using
+	     -fvtable_thunks.  (Otherwise, look under TYPE_CODE_PTR.) */
+          print_address_demangle (extract_address (
+	        valaddr + embedded_offset + 
+                TYPE_FIELD_BITPOS (type, VTBL_FNADDR_OFFSET) / 8,
+	        TYPE_LENGTH (TYPE_FIELD_TYPE (type, VTBL_FNADDR_OFFSET))),
+              stream, demangle);
+	}
+      else
+	cp_print_value_fields (type, type, valaddr, embedded_offset, address, stream, format,
+			       recurse, pretty, NULL, 0);
+      break;
+
+    case TYPE_CODE_ENUM:
+      if (format)
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	  break;
+	}
+      len = TYPE_NFIELDS (type);
+      val = unpack_long (type, valaddr + embedded_offset);
+      for (i = 0; i < len; i++)
+	{
+	  QUIT;
+	  if (val == TYPE_FIELD_BITPOS (type, i))
+	    {
+	      break;
+	    }
+	}
+      if (i < len)
+	{
+	  fputs_filtered (TYPE_FIELD_NAME (type, i), stream);
+	}
+      else
+	{
+	  print_longest (stream, 'd', 0, val);
+	}
+      break;
+
+    case TYPE_CODE_FUNC:
+      if (format)
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	  break;
+	}
+      /* FIXME, we should consider, at least for ANSI C language, eliminating
+	 the distinction made between FUNCs and POINTERs to FUNCs.  */
+      fprintf_filtered (stream, "{");
+      type_print (type, "", stream, -1);
+      fprintf_filtered (stream, "} ");
+      /* Try to print what function it points to, and its address.  */
+      print_address_demangle (address, stream, demangle);
+      break;
+
+    case TYPE_CODE_BOOL:
+      format = format ? format : output_format;
+      if (format)
+	print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+      else
+	{
+	  val = unpack_long (type, valaddr + embedded_offset);
+	  if (val == 0)
+	    fputs_filtered ("false", stream);
+	  else if (val == 1)
+	    fputs_filtered ("true", stream);
+	  else
+	    print_longest (stream, 'd', 0, val);
+	}
+      break;
+
+    case TYPE_CODE_RANGE:
+      /* FIXME: create_range_type does not set the unsigned bit in a
+	 range type (I think it probably should copy it from the target
+	 type), so we won't print values which are too large to
+	 fit in a signed integer correctly.  */
+      /* FIXME: Doesn't handle ranges of enums correctly.  (Can't just
+	 print with the target type, though, because the size of our type
+	 and the target type might differ).  */
+      /* FALLTHROUGH */
+
+    case TYPE_CODE_INT:
+      format = format ? format : output_format;
+      if (format)
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	}
+      else
+	{
+	  val_print_type_code_int (type, valaddr + embedded_offset, stream);
+	  /* C and C++ has no single byte int type, char is used instead.
+	     Since we don't know whether the value is really intended to
+	     be used as an integer or a character, print the character
+	     equivalent as well. */
+	  if (TYPE_LENGTH (type) == 1)
+	    {
+	      fputs_filtered (" ", stream);
+	      LA_PRINT_CHAR ((unsigned char) unpack_long (type, valaddr + embedded_offset),
+			     stream);
+	    }
+	}
+      break;
+
+    case TYPE_CODE_CHAR:
+      format = format ? format : output_format;
+      if (format)
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	}
+      else
+	{
+	  fprintf_filtered (stream, TYPE_UNSIGNED (type) ? "%u" : "%d",
+			    unpack_long (type, valaddr + embedded_offset));
+	  fputs_filtered (" ", stream);
+	  LA_PRINT_CHAR ((unsigned char) unpack_long (type, valaddr + embedded_offset), stream);
+	}
+      break;
+
+    case TYPE_CODE_FLT:
+      if (format)
+	{
+	  print_scalar_formatted (valaddr + embedded_offset, type, format, 0, stream);
+	}
+      else
+	{
+	  print_floating (valaddr + embedded_offset, type, stream);
+	}
+      break;
+
+    case TYPE_CODE_METHOD:
+      cp_print_class_method (valaddr + embedded_offset, lookup_pointer_type (type), stream);
+      break;
+
+    case TYPE_CODE_VOID:
+      fprintf_filtered (stream, "void");
+      break;
+
+    case TYPE_CODE_ERROR:
+      fprintf_filtered (stream, "<error type>");
+      break;
+
+    case TYPE_CODE_UNDEF:
+      /* This happens (without TYPE_FLAG_STUB set) on systems which don't use
+	 dbx xrefs (NO_DBX_XREFS in gcc) if a file has a "struct foo *bar"
+	 and no complete type for struct foo in that file.  */
+      fprintf_filtered (stream, "<incomplete type>");
+      break;
+
+    default:
+      error ("Invalid C/C++ type code %d in symbol table.", TYPE_CODE (type));
+    }
+  gdb_flush (stream);
+  return (0);
+}
+
+int
+c_value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  struct type *type = VALUE_TYPE (val);
+  struct type * real_type;
+  int full, top, using_enc;
+ 
+  /* If it is a pointer, indicate what it points to.
+
+     Print type also if it is a reference.
+
+     C++: if it is a member pointer, we will take care
+     of that when we print it.  */
+  if (TYPE_CODE (type) == TYPE_CODE_PTR ||
+      TYPE_CODE (type) == TYPE_CODE_REF)
+    {
+      /* Hack:  remove (char *) for char strings.  Their
+	 type is indicated by the quoted string anyway. */
+      if (TYPE_CODE (type) == TYPE_CODE_PTR &&
+	  TYPE_NAME (type) == NULL &&
+	  TYPE_NAME (TYPE_TARGET_TYPE (type)) != NULL &&
+	  STREQ (TYPE_NAME (TYPE_TARGET_TYPE (type)), "char"))
+	{
+	  /* Print nothing */
+	}
+      else if (objectprint && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_CLASS))
+        {
+          /* Pointer to class, check real type of object */
+	  fprintf_filtered (stream, "(");
+          type = value_rtti_target_type (val, &full, &top, &using_enc);
+          if (type) 
+            {
+              /* RTTI entry found */
+              type = lookup_pointer_type (type);
+              type_print (type, "", stream, -1);
+            }
+          else
+            {
+              /* No RTTI fields, do whatever we can */
+              type = VALUE_ENCLOSING_TYPE (val);
+              type_print (type, "", stream, -1);
+              fprintf_filtered (stream, " ?");
+            }
+	  fprintf_filtered (stream, ") ");
+        }
+      else
+	{
+          /* normal case */ 
+	  fprintf_filtered (stream, "(");
+	  type_print (type, "", stream, -1);
+	  fprintf_filtered (stream, ") ");
+	}
+    }
+  if (objectprint && (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_CLASS))
+    {
+      /* Attempt to determine real type of object */
+      real_type = value_rtti_type (val, &full, &top, &using_enc);
+      if (real_type) 
+        {
+          /* We have RTTI information, so use it */
+          val = value_full_object (val, real_type, full, top, using_enc);
+          fprintf_filtered (stream, "(%s%s) ",
+                            TYPE_NAME (real_type),
+                            full ? "" : " [incomplete object]");
+          /* Print out object: enclosing type is same as real_type if full */
+          return val_print (VALUE_ENCLOSING_TYPE (val), VALUE_CONTENTS_ALL (val), 0,
+                            VALUE_ADDRESS (val), stream, format, 1, 0, pretty);
+        }
+      else if (type != VALUE_ENCLOSING_TYPE (val))
+        {
+          /* No RTTI information, so let's do our best */
+          fprintf_filtered (stream, "(%s ?) ",
+                            TYPE_NAME (VALUE_ENCLOSING_TYPE (val)));
+          return val_print (VALUE_ENCLOSING_TYPE (val), VALUE_CONTENTS_ALL (val), 0,
+                            VALUE_ADDRESS (val), stream, format, 1, 0, pretty);
+        }
+      /* Otherwise, we end up at the return outside this "if" */
+    }
+  
+   return val_print (type, VALUE_CONTENTS_ALL (val), VALUE_EMBEDDED_OFFSET (val),
+		    VALUE_ADDRESS (val),
+		    stream, format, 1, 0, pretty);
+}
diff --git a/gdb/call-cmds.h b/gdb/call-cmds.h
new file mode 100644
index 0000000..4c02004
--- /dev/null
+++ b/gdb/call-cmds.h
@@ -0,0 +1,28 @@
+/* Prototypes for GDB commands that are called internally by other functions.
+   Copyright 1992 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+extern void
+initialize_all_files PARAMS ((void));
+
+extern void
+exec_file_command PARAMS ((char *, int));
+
+extern void
+core_file_command PARAMS ((char *, int));
+
+extern void
+break_command PARAMS ((char *, int));
diff --git a/gdb/ch-exp.c b/gdb/ch-exp.c
new file mode 100644
index 0000000..45436a3
--- /dev/null
+++ b/gdb/ch-exp.c
@@ -0,0 +1,2169 @@
+/* Parser for GNU CHILL (CCITT High-Level Language)  -*- C -*-
+   Copyright (C) 1992, 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parse a Chill expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.
+
+   Note that the language accepted by this parser is more liberal
+   than the one accepted by an actual Chill compiler.  For example, the
+   language rule that a simple name string can not be one of the reserved
+   simple name strings is not enforced (e.g "case" is not treated as a
+   reserved name).  Another example is that Chill is a strongly typed
+   language, and certain expressions that violate the type constraints
+   may still be evaluated if gdb can do so in a meaningful manner, while
+   such expressions would be rejected by the compiler.  The reason for
+   this more liberal behavior is the philosophy that the debugger
+   is intended to be a tool that is used by the programmer when things
+   go wrong, and as such, it should provide as few artificial barriers
+   to it's use as possible.  If it can do something meaningful, even
+   something that violates language contraints that are enforced by the
+   compiler, it should do so without complaint.
+
+ */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "expression.h"
+#include "language.h"
+#include "value.h"
+#include "parser-defs.h"
+#include "ch-lang.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h" /* For have_full_symbols and have_partial_symbols */
+
+#ifdef __GNUC__
+#define INLINE __inline__
+#endif
+
+typedef union
+
+  {
+    LONGEST lval;
+    ULONGEST ulval;
+    struct {
+      LONGEST val;
+      struct type *type;
+    } typed_val;
+    double dval;
+    struct symbol *sym;
+    struct type *tval;
+    struct stoken sval;
+    struct ttype tsym;
+    struct symtoken ssym;
+  }YYSTYPE;
+
+enum ch_terminal {
+  END_TOKEN = 0,
+  /* '\001' ... '\xff' come first. */
+  OPEN_PAREN = '(',
+  TOKEN_NOT_READ = 999,
+  INTEGER_LITERAL,
+  BOOLEAN_LITERAL,
+  CHARACTER_LITERAL,
+  FLOAT_LITERAL,
+  GENERAL_PROCEDURE_NAME,
+  LOCATION_NAME,
+  EMPTINESS_LITERAL,
+  CHARACTER_STRING_LITERAL,
+  BIT_STRING_LITERAL,
+  TYPENAME,
+  DOT_FIELD_NAME, /* '.' followed by <field name> */
+  CASE,
+  OF,
+  ESAC,
+  LOGIOR,
+  ORIF,
+  LOGXOR,
+  LOGAND,
+  ANDIF,
+  NOTEQUAL,
+  GEQ,
+  LEQ,
+  IN,
+  SLASH_SLASH,
+  MOD,
+  REM,
+  NOT,
+  POINTER,
+  RECEIVE,
+  UP,
+  IF,
+  THEN,
+  ELSE,
+  FI,
+  ELSIF,
+  ILLEGAL_TOKEN,
+  NUM,
+  PRED,
+  SUCC,
+  ABS,
+  CARD,
+  MAX_TOKEN,
+  MIN_TOKEN,
+  ADDR_TOKEN,
+  SIZE,
+  UPPER,
+  LOWER,
+  LENGTH,
+  ARRAY,
+  GDB_VARIABLE,
+  GDB_ASSIGNMENT
+};
+
+/* Forward declarations. */
+
+static void write_lower_upper_value PARAMS ((enum exp_opcode, struct type *));
+static enum ch_terminal match_bitstring_literal PARAMS ((void));
+static enum ch_terminal match_integer_literal PARAMS ((void));
+static enum ch_terminal match_character_literal PARAMS ((void));
+static enum ch_terminal match_string_literal PARAMS ((void));
+static enum ch_terminal match_float_literal PARAMS ((void));
+static enum ch_terminal match_float_literal PARAMS ((void));
+static int decode_integer_literal PARAMS ((LONGEST *, char **));
+static int decode_integer_value PARAMS ((int, char **, LONGEST *));
+static char *match_simple_name_string PARAMS ((void));
+static void growbuf_by_size PARAMS ((int));
+static void parse_untyped_expr PARAMS ((void));
+static void parse_if_expression PARAMS ((void));
+static void parse_else_alternative PARAMS ((void));
+static void parse_then_alternative PARAMS ((void));
+static void parse_expr PARAMS ((void));
+static void parse_operand0 PARAMS ((void));
+static void parse_operand1 PARAMS ((void));
+static void parse_operand2 PARAMS ((void));
+static void parse_operand3 PARAMS ((void));
+static void parse_operand4 PARAMS ((void));
+static void parse_operand5 PARAMS ((void));
+static void parse_operand6 PARAMS ((void));
+static void parse_primval PARAMS ((void));
+static void parse_tuple PARAMS ((struct type *));
+static void parse_opt_element_list PARAMS ((struct type *));
+static void parse_tuple_element PARAMS ((struct type *));
+static void parse_named_record_element PARAMS ((void));
+static void parse_call PARAMS ((void));
+static struct type *parse_mode_or_normal_call PARAMS ((void));
+#if 0
+static struct type *parse_mode_call PARAMS ((void));
+#endif
+static void parse_unary_call PARAMS ((void));
+static int parse_opt_untyped_expr PARAMS ((void));
+static void parse_case_label PARAMS ((void));
+static int expect PARAMS ((enum ch_terminal, char *));
+static void parse_expr PARAMS ((void));
+static void parse_primval PARAMS ((void));
+static void parse_untyped_expr PARAMS ((void));
+static int parse_opt_untyped_expr PARAMS ((void));
+static void parse_if_expression_body PARAMS((void));
+static enum ch_terminal ch_lex PARAMS ((void));
+INLINE static enum ch_terminal PEEK_TOKEN PARAMS ((void));
+static enum ch_terminal peek_token_ PARAMS ((int));
+static void forward_token_ PARAMS ((void));
+static void require PARAMS ((enum ch_terminal));
+static int check_token PARAMS ((enum ch_terminal));
+
+#define MAX_LOOK_AHEAD 2
+static enum ch_terminal terminal_buffer[MAX_LOOK_AHEAD+1] = {
+  TOKEN_NOT_READ, TOKEN_NOT_READ, TOKEN_NOT_READ};
+static YYSTYPE yylval;
+static YYSTYPE val_buffer[MAX_LOOK_AHEAD+1];
+
+/*int current_token, lookahead_token;*/
+
+INLINE static enum ch_terminal
+PEEK_TOKEN()
+{
+  if (terminal_buffer[0] == TOKEN_NOT_READ)
+    {
+      terminal_buffer[0] = ch_lex ();
+      val_buffer[0] = yylval;
+    }
+  return terminal_buffer[0];
+}
+#define PEEK_LVAL() val_buffer[0]
+#define PEEK_TOKEN1() peek_token_(1)
+#define PEEK_TOKEN2() peek_token_(2)
+static enum ch_terminal
+peek_token_ (i)
+     int i;
+{
+  if (i > MAX_LOOK_AHEAD)
+    fatal ("internal error - too much lookahead");
+  if (terminal_buffer[i] == TOKEN_NOT_READ)
+    {
+      terminal_buffer[i] = ch_lex ();
+      val_buffer[i] = yylval;
+    }
+  return terminal_buffer[i];
+}
+
+#if 0
+
+static void
+pushback_token (code, node)
+     enum ch_terminal code;
+     YYSTYPE node;
+{
+  int i;
+  if (terminal_buffer[MAX_LOOK_AHEAD] != TOKEN_NOT_READ)
+    fatal ("internal error - cannot pushback token");
+  for (i = MAX_LOOK_AHEAD; i > 0; i--)
+    { 
+      terminal_buffer[i] = terminal_buffer[i - 1]; 
+      val_buffer[i] = val_buffer[i - 1];
+  }
+  terminal_buffer[0] = code;
+  val_buffer[0] = node;
+}
+
+#endif
+
+static void
+forward_token_()
+{
+  int i;
+  for (i = 0; i < MAX_LOOK_AHEAD; i++)
+    {
+      terminal_buffer[i] = terminal_buffer[i+1];
+      val_buffer[i] = val_buffer[i+1];
+    }
+  terminal_buffer[MAX_LOOK_AHEAD] = TOKEN_NOT_READ;
+}
+#define FORWARD_TOKEN() forward_token_()
+
+/* Skip the next token.
+   if it isn't TOKEN, the parser is broken. */
+
+static void
+require(token)
+     enum ch_terminal token;
+{
+  if (PEEK_TOKEN() != token)
+    {
+      char buf[80];
+      sprintf (buf, "internal parser error - expected token %d", (int)token);
+      fatal(buf);
+    }
+  FORWARD_TOKEN();
+}
+
+static int
+check_token (token)
+     enum ch_terminal token;
+{
+  if (PEEK_TOKEN() != token)
+    return 0;
+  FORWARD_TOKEN ();
+  return 1;
+}
+
+/* return 0 if expected token was not found,
+   else return 1.
+*/
+static int
+expect (token, message)
+     enum ch_terminal token;
+     char *message;
+{
+  if (PEEK_TOKEN() != token)
+    {
+      if (message)
+	error (message);
+      else if (token < 256)
+	error ("syntax error - expected a '%c' here \"%s\"", token, lexptr);
+      else
+	error ("syntax error");
+      return 0;
+    }
+  else
+    FORWARD_TOKEN();
+  return 1;
+}
+
+#if 0
+static tree
+parse_opt_name_string (allow_all)
+     int allow_all; /* 1 if ALL is allowed as a postfix */
+{
+  int token = PEEK_TOKEN();
+  tree name;
+  if (token != NAME)
+    {
+      if (token == ALL && allow_all)
+	{
+	  FORWARD_TOKEN ();
+	  return ALL_POSTFIX;
+	}
+      return NULL_TREE;
+    }
+  name = PEEK_LVAL();
+  for (;;)
+    {
+      FORWARD_TOKEN ();
+      token = PEEK_TOKEN();
+      if (token != '!')
+	return name;
+      FORWARD_TOKEN();
+      token = PEEK_TOKEN();
+      if (token == ALL && allow_all)
+	return get_identifier3(IDENTIFIER_POINTER (name), "!", "*");
+      if (token != NAME)
+	{
+	  if (pass == 1)
+	    error ("'%s!' is not followed by an identifier",
+		   IDENTIFIER_POINTER (name));
+	  return name;
+	}
+      name = get_identifier3(IDENTIFIER_POINTER(name),
+			     "!", IDENTIFIER_POINTER(PEEK_LVAL()));
+    }
+}
+
+static tree
+parse_simple_name_string ()
+{
+  int token = PEEK_TOKEN();
+  tree name;
+  if (token != NAME)
+    {
+      error ("expected a name here");
+      return error_mark_node;
+    }
+  name = PEEK_LVAL ();
+  FORWARD_TOKEN ();
+  return name;
+}
+
+static tree
+parse_name_string ()
+{
+  tree name = parse_opt_name_string (0);
+  if (name)
+    return name;
+  if (pass == 1)
+    error ("expected a name string here");
+  return error_mark_node;
+}
+
+/* Matches: <name_string>
+   Returns if pass 1: the identifier.
+   Returns if pass 2: a decl or value for identifier. */
+
+static tree
+parse_name ()
+{
+  tree name = parse_name_string ();
+  if (pass == 1 || ignoring)
+    return name;
+  else
+    {
+      tree decl = lookup_name (name);
+      if (decl == NULL_TREE)
+	{
+	  error ("`%s' undeclared", IDENTIFIER_POINTER (name));
+	  return error_mark_node;
+	}
+      else if (TREE_CODE (TREE_TYPE (decl)) == ERROR_MARK)
+	return error_mark_node;
+      else if (TREE_CODE (decl) == CONST_DECL)
+	return DECL_INITIAL (decl);
+      else if (TREE_CODE (TREE_TYPE (decl)) == REFERENCE_TYPE)
+	return convert_from_reference (decl);
+      else
+	return decl;
+    } 
+}
+#endif
+
+#if 0
+static void
+pushback_paren_expr (expr)
+     tree expr;
+{
+  if (pass == 1 && !ignoring)
+    expr = build1 (PAREN_EXPR, NULL_TREE, expr);
+  pushback_token (EXPR, expr);
+}
+#endif
+
+/* Matches: <case label> */
+
+static void
+parse_case_label ()
+{
+  if (check_token (ELSE))
+    error ("ELSE in tuples labels not implemented");
+  /* Does not handle the case of a mode name.  FIXME */
+  parse_expr ();
+  if (check_token (':'))
+    {
+      parse_expr ();
+      write_exp_elt_opcode (BINOP_RANGE);
+    }
+}
+
+static int
+parse_opt_untyped_expr ()
+{
+  switch (PEEK_TOKEN ())
+    {
+    case ',':
+    case ':':
+    case ')':
+      return 0;
+    default:
+      parse_untyped_expr ();
+      return 1;
+    }
+}
+
+static void
+parse_unary_call ()
+{
+  FORWARD_TOKEN ();
+  expect ('(', NULL);
+  parse_expr ();
+  expect (')', NULL);
+}
+
+/* Parse NAME '(' MODENAME ')'. */
+
+#if 0
+
+static struct type *
+parse_mode_call ()
+{
+  struct type *type;
+  FORWARD_TOKEN ();
+  expect ('(', NULL);
+  if (PEEK_TOKEN () != TYPENAME)
+    error ("expect MODENAME here `%s'", lexptr);
+  type = PEEK_LVAL().tsym.type;
+  FORWARD_TOKEN ();
+  expect (')', NULL);
+  return type;
+}
+
+#endif
+
+static struct type *
+parse_mode_or_normal_call ()
+{
+  struct type *type;
+  FORWARD_TOKEN ();
+  expect ('(', NULL);
+  if (PEEK_TOKEN () == TYPENAME)
+    {
+      type = PEEK_LVAL().tsym.type;
+      FORWARD_TOKEN ();
+    }
+  else
+    {
+      parse_expr ();
+      type = NULL;
+    }
+  expect (')', NULL);
+  return type;
+}
+
+/* Parse something that looks like a function call.
+   Assume we have parsed the function, and are at the '('. */
+
+static void
+parse_call ()
+{
+  int arg_count;
+  require ('(');
+  /* This is to save the value of arglist_len
+     being accumulated for each dimension. */
+  start_arglist ();
+  if (parse_opt_untyped_expr ())
+    {
+      int tok = PEEK_TOKEN ();
+      arglist_len = 1;
+      if (tok == UP || tok == ':')
+	{
+	  FORWARD_TOKEN ();
+	  parse_expr ();
+	  expect (')', "expected ')' to terminate slice");
+	  end_arglist ();
+	  write_exp_elt_opcode (tok == UP ? TERNOP_SLICE_COUNT
+				: TERNOP_SLICE);
+	  return;
+	}
+      while (check_token (','))
+	{
+	  parse_untyped_expr ();
+	  arglist_len++;
+	}
+    }
+  else
+    arglist_len = 0;
+  expect (')', NULL);
+  arg_count = end_arglist ();
+  write_exp_elt_opcode (MULTI_SUBSCRIPT);
+  write_exp_elt_longcst (arg_count);
+  write_exp_elt_opcode (MULTI_SUBSCRIPT);
+}
+
+static void
+parse_named_record_element ()
+{
+  struct stoken label;
+  char buf[256];
+
+  label = PEEK_LVAL ().sval;
+  sprintf (buf, "expected a field name here `%s'", lexptr);
+  expect (DOT_FIELD_NAME, buf);
+  if (check_token (','))
+    parse_named_record_element ();
+  else if (check_token (':'))
+    parse_expr ();
+  else
+    error ("syntax error near `%s' in named record tuple element", lexptr);
+  write_exp_elt_opcode (OP_LABELED);
+  write_exp_string (label);
+  write_exp_elt_opcode (OP_LABELED);
+}
+
+/* Returns one or more TREE_LIST nodes, in reverse order. */
+
+static void
+parse_tuple_element (type)
+     struct type *type;
+{
+  if (PEEK_TOKEN () == DOT_FIELD_NAME)
+    {
+      /* Parse a labelled structure tuple. */
+      parse_named_record_element ();
+      return;
+    }
+
+  if (check_token ('('))
+    {
+      if (check_token ('*'))
+	{
+	  expect (')', "missing ')' after '*' case label list");
+	  if (type)
+	    {
+	      if (TYPE_CODE (type) == TYPE_CODE_ARRAY)
+		{
+		  /* do this as a range from low to high */
+		  struct type *range_type = TYPE_FIELD_TYPE (type, 0);
+		  LONGEST low_bound, high_bound;
+		  if (get_discrete_bounds (range_type, &low_bound, &high_bound) < 0)
+		    error ("cannot determine bounds for (*)");
+		  /* lower bound */
+		  write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_type (range_type);
+		  write_exp_elt_longcst (low_bound);
+		  write_exp_elt_opcode (OP_LONG);
+		  /* upper bound */
+		  write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_type (range_type);
+		  write_exp_elt_longcst (high_bound);
+		  write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_opcode (BINOP_RANGE);
+		}
+	      else
+		error ("(*) in invalid context");
+	    }
+	  else
+	    error ("(*) only possible with modename in front of tuple (mode[..])");
+	}
+      else
+	{
+	  parse_case_label ();
+	  while (check_token (','))
+	    {
+	      parse_case_label ();
+	      write_exp_elt_opcode (BINOP_COMMA);
+	    }
+	  expect (')', NULL);
+	}
+    }
+  else
+    parse_untyped_expr ();
+  if (check_token (':'))
+    {
+      /* A powerset range or a labeled Array. */
+      parse_untyped_expr ();
+      write_exp_elt_opcode (BINOP_RANGE);
+    }
+}
+
+/* Matches:  a COMMA-separated list of tuple elements.
+   Returns a list (of TREE_LIST nodes). */
+static void
+parse_opt_element_list (type)
+     struct type *type;
+{
+  arglist_len = 0;
+  if (PEEK_TOKEN () == ']')
+    return;
+  for (;;)
+    {
+      parse_tuple_element (type);
+      arglist_len++;
+      if (PEEK_TOKEN () == ']')
+	break;
+      if (!check_token (','))
+	error ("bad syntax in tuple");
+    }
+}
+
+/* Parses: '[' elements ']'
+   If modename is non-NULL it prefixed the tuple.  */
+
+static void
+parse_tuple (mode)
+     struct type *mode;
+{
+  struct type *type;
+  if (mode)
+    type = check_typedef (mode);
+  else
+    type = 0;
+  require ('[');
+  start_arglist ();
+  parse_opt_element_list (type);
+  expect (']', "missing ']' after tuple");
+  write_exp_elt_opcode (OP_ARRAY);
+  write_exp_elt_longcst ((LONGEST) 0);
+  write_exp_elt_longcst ((LONGEST) end_arglist () - 1);
+  write_exp_elt_opcode (OP_ARRAY);
+  if (type)
+    {
+      if (TYPE_CODE (type) != TYPE_CODE_ARRAY
+	  && TYPE_CODE (type) != TYPE_CODE_STRUCT
+	  && TYPE_CODE (type) != TYPE_CODE_SET)
+	error ("invalid tuple mode");
+      write_exp_elt_opcode (UNOP_CAST);
+      write_exp_elt_type (mode);
+      write_exp_elt_opcode (UNOP_CAST);
+    }
+}
+
+static void
+parse_primval ()
+{
+  struct type *type;
+  enum exp_opcode op;
+  char *op_name;
+  switch (PEEK_TOKEN ())
+    {
+    case INTEGER_LITERAL: 
+    case CHARACTER_LITERAL:
+      write_exp_elt_opcode (OP_LONG);
+      write_exp_elt_type (PEEK_LVAL ().typed_val.type);
+      write_exp_elt_longcst (PEEK_LVAL ().typed_val.val);
+      write_exp_elt_opcode (OP_LONG);
+      FORWARD_TOKEN ();
+      break;
+    case BOOLEAN_LITERAL:
+      write_exp_elt_opcode (OP_BOOL);
+      write_exp_elt_longcst ((LONGEST) PEEK_LVAL ().ulval);
+      write_exp_elt_opcode (OP_BOOL);
+      FORWARD_TOKEN ();
+      break;
+    case FLOAT_LITERAL:
+      write_exp_elt_opcode (OP_DOUBLE);
+      write_exp_elt_type (builtin_type_double);
+      write_exp_elt_dblcst (PEEK_LVAL ().dval);
+      write_exp_elt_opcode (OP_DOUBLE);
+      FORWARD_TOKEN ();
+      break;
+    case EMPTINESS_LITERAL:
+      write_exp_elt_opcode (OP_LONG);
+      write_exp_elt_type (lookup_pointer_type (builtin_type_void));
+      write_exp_elt_longcst (0);
+      write_exp_elt_opcode (OP_LONG);
+      FORWARD_TOKEN ();
+      break;
+    case CHARACTER_STRING_LITERAL:
+      write_exp_elt_opcode (OP_STRING);
+      write_exp_string (PEEK_LVAL ().sval);
+      write_exp_elt_opcode (OP_STRING);
+      FORWARD_TOKEN ();
+      break;
+    case BIT_STRING_LITERAL:
+      write_exp_elt_opcode (OP_BITSTRING);
+      write_exp_bitstring (PEEK_LVAL ().sval);
+      write_exp_elt_opcode (OP_BITSTRING);
+      FORWARD_TOKEN ();
+      break;
+    case ARRAY:
+      FORWARD_TOKEN ();
+      /* This is pseudo-Chill, similar to C's '(TYPE[])EXPR'
+	 which casts to an artificial array. */
+      expect ('(', NULL);
+      expect (')', NULL);
+      if (PEEK_TOKEN () != TYPENAME)
+	error ("missing MODENAME after ARRAY()");
+      type = PEEK_LVAL().tsym.type;
+      FORWARD_TOKEN ();
+      expect ('(', NULL);
+      parse_expr ();
+      expect (')', "missing right parenthesis");
+      type = create_array_type ((struct type *) NULL, type,
+				create_range_type ((struct type *) NULL,
+						   builtin_type_int, 0, 0));
+      TYPE_ARRAY_UPPER_BOUND_TYPE(type) = BOUND_CANNOT_BE_DETERMINED;
+      write_exp_elt_opcode (UNOP_CAST);
+      write_exp_elt_type (type);
+      write_exp_elt_opcode (UNOP_CAST);
+      break;
+#if 0
+    case CONST:
+    case EXPR:
+      val = PEEK_LVAL();
+      FORWARD_TOKEN ();
+      break;
+#endif
+    case '(':
+      FORWARD_TOKEN ();
+      parse_expr ();
+      expect (')', "missing right parenthesis");
+      break;
+    case '[':
+      parse_tuple (NULL);
+      break;
+    case GENERAL_PROCEDURE_NAME:
+    case LOCATION_NAME:
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      write_exp_elt_block (NULL);
+      write_exp_elt_sym (PEEK_LVAL ().ssym.sym);
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      FORWARD_TOKEN ();
+      break;
+    case GDB_VARIABLE:	/* gdb specific */
+      FORWARD_TOKEN ();
+      break;
+    case NUM:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_CAST);
+      write_exp_elt_type (builtin_type_int);
+      write_exp_elt_opcode (UNOP_CAST);
+      break;
+    case CARD:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_CARD);
+      break;
+    case MAX_TOKEN:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_CHMAX);
+      break;
+    case MIN_TOKEN:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_CHMIN);
+      break;
+    case PRED:      op_name = "PRED"; goto unimplemented_unary_builtin;
+    case SUCC:      op_name = "SUCC"; goto unimplemented_unary_builtin;
+    case ABS:       op_name = "ABS";  goto unimplemented_unary_builtin;
+    unimplemented_unary_builtin:
+      parse_unary_call ();
+      error ("not implemented:  %s builtin function", op_name);
+      break;
+    case ADDR_TOKEN:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_ADDR);
+      break;
+    case SIZE:
+      type = parse_mode_or_normal_call ();
+      if (type)
+	{ write_exp_elt_opcode (OP_LONG);
+	  write_exp_elt_type (builtin_type_int);
+	  CHECK_TYPEDEF (type);
+	  write_exp_elt_longcst ((LONGEST) TYPE_LENGTH (type));
+	  write_exp_elt_opcode (OP_LONG);
+	}
+      else
+	write_exp_elt_opcode (UNOP_SIZEOF);
+      break;
+    case LOWER:
+      op = UNOP_LOWER;
+      goto lower_upper;
+    case UPPER:
+      op = UNOP_UPPER;
+      goto lower_upper;
+    lower_upper:
+      type = parse_mode_or_normal_call ();
+      write_lower_upper_value (op, type);
+      break;
+    case LENGTH:
+      parse_unary_call ();
+      write_exp_elt_opcode (UNOP_LENGTH);
+      break;
+    case TYPENAME:
+      type = PEEK_LVAL ().tsym.type;
+      FORWARD_TOKEN ();
+      switch (PEEK_TOKEN())
+	{
+	case '[':
+	  parse_tuple (type);
+	  break;
+	case '(':
+	  FORWARD_TOKEN ();
+	  parse_expr ();
+	  expect (')', "missing right parenthesis");
+	  write_exp_elt_opcode (UNOP_CAST);
+	  write_exp_elt_type (type);
+	  write_exp_elt_opcode (UNOP_CAST);
+	  break;
+	default:
+	  error ("typename in invalid context");
+	}
+      break;
+      
+    default: 
+      error ("invalid expression syntax at `%s'", lexptr);
+    }
+  for (;;)
+    {
+      switch (PEEK_TOKEN ())
+	{
+	case DOT_FIELD_NAME:
+	  write_exp_elt_opcode (STRUCTOP_STRUCT);
+	  write_exp_string (PEEK_LVAL ().sval);
+	  write_exp_elt_opcode (STRUCTOP_STRUCT);
+	  FORWARD_TOKEN ();
+	  continue;
+	case POINTER:
+	  FORWARD_TOKEN ();
+	  if (PEEK_TOKEN () == TYPENAME)
+	    {
+	      type = PEEK_LVAL ().tsym.type;
+	      write_exp_elt_opcode (UNOP_CAST);
+	      write_exp_elt_type (lookup_pointer_type (type));
+	      write_exp_elt_opcode (UNOP_CAST);
+	      FORWARD_TOKEN ();
+	    }
+	  write_exp_elt_opcode (UNOP_IND);
+	  continue;
+	case OPEN_PAREN:
+	  parse_call ();
+	  continue;
+	case CHARACTER_STRING_LITERAL:
+	case CHARACTER_LITERAL:
+	case BIT_STRING_LITERAL:
+	  /* Handle string repetition. (See comment in parse_operand5.) */
+	  parse_primval ();
+	  write_exp_elt_opcode (MULTI_SUBSCRIPT);
+	  write_exp_elt_longcst (1);
+	  write_exp_elt_opcode (MULTI_SUBSCRIPT);
+	  continue;
+	case END_TOKEN:
+	case TOKEN_NOT_READ:
+	case INTEGER_LITERAL:
+	case BOOLEAN_LITERAL:
+	case FLOAT_LITERAL:
+	case GENERAL_PROCEDURE_NAME:
+	case LOCATION_NAME:
+	case EMPTINESS_LITERAL:
+	case TYPENAME:
+	case CASE:
+	case OF:
+	case ESAC:
+	case LOGIOR:
+	case ORIF:
+	case LOGXOR:
+	case LOGAND:
+	case ANDIF:
+	case NOTEQUAL:
+	case GEQ:
+	case LEQ:
+	case IN:
+	case SLASH_SLASH:
+	case MOD:
+	case REM:
+	case NOT:
+	case RECEIVE:
+	case UP:
+	case IF:
+	case THEN:
+	case ELSE:
+	case FI:
+	case ELSIF:
+	case ILLEGAL_TOKEN:
+	case NUM:
+	case PRED:
+	case SUCC:
+	case ABS:
+	case CARD:
+	case MAX_TOKEN:
+	case MIN_TOKEN:
+	case ADDR_TOKEN:
+	case SIZE:
+	case UPPER:
+	case LOWER:
+	case LENGTH:
+	case ARRAY:
+	case GDB_VARIABLE:
+	case GDB_ASSIGNMENT:
+	  break;
+	}
+      break;
+    }
+  return;
+}
+
+static void
+parse_operand6 ()
+{
+  if (check_token (RECEIVE))
+    {
+      parse_primval ();
+      error ("not implemented:  RECEIVE expression");
+    }
+  else if (check_token (POINTER))
+    {
+      parse_primval ();
+      write_exp_elt_opcode (UNOP_ADDR);
+    }
+  else
+    parse_primval();
+}
+
+static void
+parse_operand5()
+{
+  enum exp_opcode op;
+  /* We are supposed to be looking for a <string repetition operator>,
+     but in general we can't distinguish that from a parenthesized
+     expression.  This is especially difficult if we allow the
+     string operand to be a constant expression (as requested by
+     some users), and not just a string literal.
+     Consider:  LPRN expr RPRN LPRN expr RPRN
+     Is that a function call or string repetition?
+     Instead, we handle string repetition in parse_primval,
+     and build_generalized_call. */
+  switch (PEEK_TOKEN())
+    {
+    case NOT:  op = UNOP_LOGICAL_NOT; break;
+    case '-':  op = UNOP_NEG; break;
+    default:
+      op = OP_NULL;
+    }
+  if (op != OP_NULL)
+    FORWARD_TOKEN();
+  parse_operand6();
+  if (op != OP_NULL)
+    write_exp_elt_opcode (op);
+}
+
+static void
+parse_operand4 ()
+{
+  enum exp_opcode op;
+  parse_operand5();
+  for (;;)
+    {
+      switch (PEEK_TOKEN())
+	{
+	case '*':  op = BINOP_MUL; break;
+	case '/':  op = BINOP_DIV; break;
+	case MOD:  op = BINOP_MOD; break;
+	case REM:  op = BINOP_REM; break;
+	default:
+	  return;
+	}
+      FORWARD_TOKEN();
+      parse_operand5();
+      write_exp_elt_opcode (op);
+    }
+}
+
+static void
+parse_operand3 ()
+{
+  enum exp_opcode op;
+  parse_operand4 ();
+  for (;;)
+    {
+      switch (PEEK_TOKEN())
+	{
+	case '+':    op = BINOP_ADD; break;
+	case '-':    op = BINOP_SUB; break;
+	case SLASH_SLASH: op = BINOP_CONCAT; break;
+	default:
+	  return;
+	}
+      FORWARD_TOKEN();
+      parse_operand4();
+      write_exp_elt_opcode (op);
+    }
+}
+
+static void
+parse_operand2 ()
+{
+  enum exp_opcode op;
+  parse_operand3 ();
+  for (;;)
+    {
+      if (check_token (IN))
+	{
+	  parse_operand3();
+	  write_exp_elt_opcode (BINOP_IN);
+	}
+      else
+	{
+	  switch (PEEK_TOKEN())
+	    {
+	    case '>':      op = BINOP_GTR; break;
+	    case GEQ:      op = BINOP_GEQ; break;
+	    case '<':      op = BINOP_LESS; break;
+	    case LEQ:      op = BINOP_LEQ; break;
+	    case '=':      op = BINOP_EQUAL; break;
+	    case NOTEQUAL: op = BINOP_NOTEQUAL; break;
+	    default:
+	      return;
+	    }
+	  FORWARD_TOKEN();
+	  parse_operand3();
+	  write_exp_elt_opcode (op);
+	}
+    }
+}
+
+static void
+parse_operand1 ()
+{
+  enum exp_opcode op;
+  parse_operand2 ();
+  for (;;)
+    {
+      switch (PEEK_TOKEN())
+	{
+	case LOGAND: op = BINOP_BITWISE_AND; break;
+	case ANDIF:  op = BINOP_LOGICAL_AND; break;
+	default:
+	  return;
+	}
+      FORWARD_TOKEN();
+      parse_operand2();
+      write_exp_elt_opcode (op);
+    }
+}
+
+static void
+parse_operand0 ()
+{ 
+  enum exp_opcode op;
+  parse_operand1();
+  for (;;)
+    {
+      switch (PEEK_TOKEN())
+	{
+	case LOGIOR:  op = BINOP_BITWISE_IOR; break;
+	case LOGXOR:  op = BINOP_BITWISE_XOR; break;
+	case ORIF:    op = BINOP_LOGICAL_OR; break;
+	default:
+	  return;
+	}
+      FORWARD_TOKEN();
+      parse_operand1();
+      write_exp_elt_opcode (op);
+    }
+}
+
+static void
+parse_expr ()
+{
+  parse_operand0 ();
+  if (check_token (GDB_ASSIGNMENT))
+    {
+      parse_expr ();
+      write_exp_elt_opcode (BINOP_ASSIGN);
+    }
+}
+
+static void
+parse_then_alternative ()
+{
+  expect (THEN, "missing 'THEN' in 'IF' expression");
+  parse_expr ();
+}
+
+static void
+parse_else_alternative ()
+{
+  if (check_token (ELSIF))
+    parse_if_expression_body ();
+  else if (check_token (ELSE))
+    parse_expr ();
+  else
+    error ("missing ELSE/ELSIF in IF expression");
+}
+
+/* Matches: <boolean expression> <then alternative> <else alternative> */
+
+static void
+parse_if_expression_body ()
+{
+  parse_expr ();
+  parse_then_alternative ();
+  parse_else_alternative ();
+  write_exp_elt_opcode (TERNOP_COND);
+}
+
+static void
+parse_if_expression ()
+{
+  require (IF);
+  parse_if_expression_body ();
+  expect (FI, "missing 'FI' at end of conditional expression");
+}
+
+/* An <untyped_expr> is a superset of <expr>.  It also includes
+   <conditional expressions> and untyped <tuples>, whose types
+   are not given by their constituents.  Hence, these are only
+   allowed in certain contexts that expect a certain type.
+   You should call convert() to fix up the <untyped_expr>. */
+
+static void
+parse_untyped_expr ()
+{
+  switch (PEEK_TOKEN())
+    {
+    case IF:
+      parse_if_expression ();
+      return;
+    case CASE:
+      error ("not implemented:  CASE expression");
+    case '(':
+      switch (PEEK_TOKEN1())
+	{
+	case IF:
+	case CASE:
+	  goto skip_lprn;
+	case '[':
+	skip_lprn:
+	  FORWARD_TOKEN ();
+	  parse_untyped_expr ();
+	  expect (')', "missing ')'");
+	  return;
+	default: ;
+	  /* fall through */
+	}
+    default:
+      parse_operand0 ();
+    }
+}
+
+int
+chill_parse ()
+{
+  terminal_buffer[0] = TOKEN_NOT_READ;
+  if (PEEK_TOKEN () == TYPENAME && PEEK_TOKEN1 () == END_TOKEN)
+    {
+      write_exp_elt_opcode(OP_TYPE);
+      write_exp_elt_type(PEEK_LVAL ().tsym.type);
+      write_exp_elt_opcode(OP_TYPE);
+      FORWARD_TOKEN ();
+    }
+  else
+    parse_expr ();
+  if (terminal_buffer[0] != END_TOKEN)
+    {
+      if (comma_terminates && terminal_buffer[0] == ',')
+	lexptr--;  /* Put the comma back.  */
+      else
+	error ("Junk after end of expression.");
+    }
+  return 0;
+}
+
+
+/* Implementation of a dynamically expandable buffer for processing input
+   characters acquired through lexptr and building a value to return in
+   yylval. */
+
+static char *tempbuf;		/* Current buffer contents */
+static int tempbufsize;		/* Size of allocated buffer */
+static int tempbufindex;	/* Current index into buffer */
+
+#define GROWBY_MIN_SIZE 64	/* Minimum amount to grow buffer by */
+
+#define CHECKBUF(size) \
+  do { \
+    if (tempbufindex + (size) >= tempbufsize) \
+      { \
+	growbuf_by_size (size); \
+      } \
+  } while (0);
+
+/* Grow the static temp buffer if necessary, including allocating the first one
+   on demand. */
+
+static void
+growbuf_by_size (count)
+     int count;
+{
+  int growby;
+
+  growby = max (count, GROWBY_MIN_SIZE);
+  tempbufsize += growby;
+  if (tempbuf == NULL)
+    {
+      tempbuf = (char *) xmalloc (tempbufsize);
+    }
+  else
+    {
+      tempbuf = (char *) xrealloc (tempbuf, tempbufsize);
+    }
+}
+
+/* Try to consume a simple name string token.  If successful, returns
+   a pointer to a nullbyte terminated copy of the name that can be used
+   in symbol table lookups.  If not successful, returns NULL. */
+
+static char *
+match_simple_name_string ()
+{
+  char *tokptr = lexptr;
+
+  if (isalpha (*tokptr) || *tokptr == '_')
+    {
+      char *result;
+      do {
+	tokptr++;
+      } while (isalnum (*tokptr) || (*tokptr == '_'));
+      yylval.sval.ptr = lexptr;
+      yylval.sval.length = tokptr - lexptr;
+      lexptr = tokptr;
+      result = copy_name (yylval.sval);
+      return result;
+    }
+  return (NULL);
+}
+
+/* Start looking for a value composed of valid digits as set by the base
+   in use.  Note that '_' characters are valid anywhere, in any quantity,
+   and are simply ignored.  Since we must find at least one valid digit,
+   or reject this token as an integer literal, we keep track of how many
+   digits we have encountered. */
+  
+static int
+decode_integer_value (base, tokptrptr, ivalptr)
+  int base;
+  char **tokptrptr;
+  LONGEST *ivalptr;
+{
+  char *tokptr = *tokptrptr;
+  int temp;
+  int digits = 0;
+
+  while (*tokptr != '\0')
+    {
+      temp = *tokptr;
+      if (isupper (temp))
+        temp = tolower (temp);
+      tokptr++;
+      switch (temp)
+	{
+	case '_':
+	  continue;
+	case '0':  case '1':  case '2':  case '3':  case '4':
+	case '5':  case '6':  case '7':  case '8':  case '9':
+	  temp -= '0';
+	  break;
+	case 'a':  case 'b':  case 'c':  case 'd':  case 'e': case 'f':
+	  temp -= 'a';
+	  temp += 10;
+	  break;
+	default:
+	  temp = base;
+	  break;
+	}
+      if (temp < base)
+	{
+	  digits++;
+	  *ivalptr *= base;
+	  *ivalptr += temp;
+	}
+      else
+	{
+	  /* Found something not in domain for current base. */
+	  tokptr--;	/* Unconsume what gave us indigestion. */
+	  break;
+	}
+    }
+  
+  /* If we didn't find any digits, then we don't have a valid integer
+     value, so reject the entire token.  Otherwise, update the lexical
+     scan pointer, and return non-zero for success. */
+  
+  if (digits == 0)
+    {
+      return (0);
+    }
+  else
+    {
+      *tokptrptr = tokptr;
+      return (1);
+    }
+}
+
+static int
+decode_integer_literal (valptr, tokptrptr)
+  LONGEST *valptr;
+  char **tokptrptr;
+{
+  char *tokptr = *tokptrptr;
+  int base = 0;
+  LONGEST ival = 0;
+  int explicit_base = 0;
+  
+  /* Look for an explicit base specifier, which is optional. */
+  
+  switch (*tokptr)
+    {
+    case 'd':
+    case 'D':
+      explicit_base++;
+      base = 10;
+      tokptr++;
+      break;
+    case 'b':
+    case 'B':
+      explicit_base++;
+      base = 2;
+      tokptr++;
+      break;
+    case 'h':
+    case 'H':
+      explicit_base++;
+      base = 16;
+      tokptr++;
+      break;
+    case 'o':
+    case 'O':
+      explicit_base++;
+      base = 8;
+      tokptr++;
+      break;
+    default:
+      base = 10;
+      break;
+    }
+  
+  /* If we found an explicit base ensure that the character after the
+     explicit base is a single quote. */
+  
+  if (explicit_base && (*tokptr++ != '\''))
+    {
+      return (0);
+    }
+  
+  /* Attempt to decode whatever follows as an integer value in the
+     indicated base, updating the token pointer in the process and
+     computing the value into ival.  Also, if we have an explicit
+     base, then the next character must not be a single quote, or we
+     have a bitstring literal, so reject the entire token in this case.
+     Otherwise, update the lexical scan pointer, and return non-zero
+     for success. */
+
+  if (!decode_integer_value (base, &tokptr, &ival))
+    {
+      return (0);
+    }
+  else if (explicit_base && (*tokptr == '\''))
+    {
+      return (0);
+    }
+  else
+    {
+      *valptr = ival;
+      *tokptrptr = tokptr;
+      return (1);
+    }
+}
+
+/*  If it wasn't for the fact that floating point values can contain '_'
+    characters, we could just let strtod do all the hard work by letting it
+    try to consume as much of the current token buffer as possible and
+    find a legal conversion.  Unfortunately we need to filter out the '_'
+    characters before calling strtod, which we do by copying the other
+    legal chars to a local buffer to be converted.  However since we also
+    need to keep track of where the last unconsumed character in the input
+    buffer is, we have transfer only as many characters as may compose a
+    legal floating point value. */
+    
+static enum ch_terminal
+match_float_literal ()
+{
+  char *tokptr = lexptr;
+  char *buf;
+  char *copy;
+  double dval;
+  extern double strtod ();
+  
+  /* Make local buffer in which to build the string to convert.  This is
+     required because underscores are valid in chill floating point numbers
+     but not in the string passed to strtod to convert.  The string will be
+     no longer than our input string. */
+     
+  copy = buf = (char *) alloca (strlen (tokptr) + 1);
+
+  /* Transfer all leading digits to the conversion buffer, discarding any
+     underscores. */
+
+  while (isdigit (*tokptr) || *tokptr == '_')
+    {
+      if (*tokptr != '_')
+	{
+	  *copy++ = *tokptr;
+	}
+      tokptr++;
+    }
+
+  /* Now accept either a '.', or one of [eEdD].  Dot is legal regardless
+     of whether we found any leading digits, and we simply accept it and
+     continue on to look for the fractional part and/or exponent.  One of
+     [eEdD] is legal only if we have seen digits, and means that there
+     is no fractional part.  If we find neither of these, then this is
+     not a floating point number, so return failure. */
+
+  switch (*tokptr++)
+    {
+      case '.':
+        /* Accept and then look for fractional part and/or exponent. */
+	*copy++ = '.';
+	break;
+
+      case 'e':
+      case 'E':
+      case 'd':
+      case 'D':
+	if (copy == buf)
+	  {
+	    return (0);
+	  }
+	*copy++ = 'e';
+	goto collect_exponent;
+	break;
+
+      default:
+	return (0);
+        break;
+    }
+
+  /* We found a '.', copy any fractional digits to the conversion buffer, up
+     to the first nondigit, non-underscore character. */
+
+  while (isdigit (*tokptr) || *tokptr == '_')
+    {
+      if (*tokptr != '_')
+	{
+	  *copy++ = *tokptr;
+	}
+      tokptr++;
+    }
+
+  /* Look for an exponent, which must start with one of [eEdD].  If none
+     is found, jump directly to trying to convert what we have collected
+     so far. */
+
+  switch (*tokptr)
+    {
+      case 'e':
+      case 'E':
+      case 'd':
+      case 'D':
+	*copy++ = 'e';
+	tokptr++;
+	break;
+      default:
+	goto convert_float;
+	break;
+    }
+
+  /* Accept an optional '-' or '+' following one of [eEdD]. */
+
+  collect_exponent:
+  if (*tokptr == '+' || *tokptr == '-')
+    {
+      *copy++ = *tokptr++;
+    }
+
+  /* Now copy an exponent into the conversion buffer.  Note that at the 
+     moment underscores are *not* allowed in exponents. */
+
+  while (isdigit (*tokptr))
+    {
+      *copy++ = *tokptr++;
+    }
+
+  /* If we transfered any chars to the conversion buffer, try to interpret its
+     contents as a floating point value.  If any characters remain, then we
+     must not have a valid floating point string. */
+
+  convert_float:
+  *copy = '\0';
+  if (copy != buf)
+      {
+        dval = strtod (buf, &copy);
+        if (*copy == '\0')
+	  {
+	    yylval.dval = dval;
+	    lexptr = tokptr;
+	    return (FLOAT_LITERAL);
+	  }
+      }
+  return (0);
+}
+
+/* Recognize a string literal.  A string literal is a sequence
+   of characters enclosed in matching single or double quotes, except that
+   a single character inside single quotes is a character literal, which
+   we reject as a string literal.  To embed the terminator character inside
+   a string, it is simply doubled (I.E. "this""is""one""string") */
+
+static enum ch_terminal
+match_string_literal ()
+{
+  char *tokptr = lexptr;
+  int in_ctrlseq = 0;
+  LONGEST ival;
+
+  for (tempbufindex = 0, tokptr++; *tokptr != '\0'; tokptr++)
+    {
+      CHECKBUF (1);
+    tryagain: ;
+      if (in_ctrlseq)
+	{
+	  /* skip possible whitespaces */
+	  while ((*tokptr == ' ' || *tokptr == '\t') && *tokptr)
+	    tokptr++;
+	  if (*tokptr == ')')
+	    {
+	      in_ctrlseq = 0;
+	      tokptr++;
+	      goto tryagain;
+	    }
+	  else if (*tokptr != ',')
+	    error ("Invalid control sequence");
+	  tokptr++;
+	  /* skip possible whitespaces */
+	  while ((*tokptr == ' ' || *tokptr == '\t') && *tokptr)
+	    tokptr++;
+	  if (!decode_integer_literal (&ival, &tokptr))
+	    error ("Invalid control sequence");
+	  tokptr--;
+	}
+      else if (*tokptr == *lexptr)
+	{
+	  if (*(tokptr + 1) == *lexptr)
+	    {
+	      ival = *tokptr++;
+	    }
+	  else
+	    {
+	      break;
+	    }
+	}
+      else if (*tokptr == '^')
+	{
+	  if (*(tokptr + 1) == '(')
+	    {
+	      in_ctrlseq = 1;
+	      tokptr += 2;
+	      if (!decode_integer_literal (&ival, &tokptr))
+		error ("Invalid control sequence");
+	      tokptr--;
+	    }
+	  else if (*(tokptr + 1) == '^')
+	    ival = *tokptr++;
+	  else
+	    error ("Invalid control sequence");
+	}
+      else
+	ival = *tokptr;
+      tempbuf[tempbufindex++] = ival;
+    }
+  if (in_ctrlseq)
+    error ("Invalid control sequence");
+
+  if (*tokptr == '\0'					/* no terminator */
+      || (tempbufindex == 1 && *tokptr == '\''))	/* char literal */
+    {
+      return (0);
+    }
+  else
+    {
+      tempbuf[tempbufindex] = '\0';
+      yylval.sval.ptr = tempbuf;
+      yylval.sval.length = tempbufindex;
+      lexptr = ++tokptr;
+      return (CHARACTER_STRING_LITERAL);
+    }
+}
+
+/* Recognize a character literal.  A character literal is single character
+   or a control sequence, enclosed in single quotes.  A control sequence
+   is a comma separated list of one or more integer literals, enclosed
+   in parenthesis and introduced with a circumflex character.
+
+   EX:  'a'  '^(7)'  '^(7,8)'
+
+   As a GNU chill extension, the syntax C'xx' is also recognized as a 
+   character literal, where xx is a hex value for the character.
+
+   Note that more than a single character, enclosed in single quotes, is
+   a string literal.
+
+   Returns CHARACTER_LITERAL if a match is found.
+   */
+
+static enum ch_terminal
+match_character_literal ()
+{
+  char *tokptr = lexptr;
+  LONGEST ival = 0;
+  
+  if ((*tokptr == 'c' || *tokptr == 'C') && (*(tokptr + 1) == '\''))
+    {
+      /* We have a GNU chill extension form, so skip the leading "C'",
+	 decode the hex value, and then ensure that we have a trailing
+	 single quote character. */
+      tokptr += 2;
+      if (!decode_integer_value (16, &tokptr, &ival) || (*tokptr != '\''))
+	{
+	  return (0);
+	}
+      tokptr++;
+    }
+  else if (*tokptr == '\'')
+    {
+      tokptr++;
+
+      /* Determine which form we have, either a control sequence or the
+	 single character form. */
+      
+      if (*tokptr == '^')
+	{
+	  if (*(tokptr + 1) == '(')
+	    {
+	      /* Match and decode a control sequence.  Return zero if we don't
+		 find a valid integer literal, or if the next unconsumed character
+		 after the integer literal is not the trailing ')'. */
+	      tokptr += 2;
+	      if (!decode_integer_literal (&ival, &tokptr) || (*tokptr++ != ')'))
+		{
+		  return (0);
+		}
+	    }
+	  else if (*(tokptr + 1) == '^')
+	    {
+	      ival = *tokptr;
+	      tokptr += 2;
+	    }
+	  else
+	    /* fail */
+	    error ("Invalid control sequence");
+	}
+      else if (*tokptr == '\'')
+	{
+	  /* this must be duplicated */
+	  ival = *tokptr;
+	  tokptr += 2;
+	}
+      else
+	{
+	  ival = *tokptr++;
+	}
+
+      /* The trailing quote has not yet been consumed.  If we don't find
+	 it, then we have no match. */
+      
+      if (*tokptr++ != '\'')
+	{
+	  return (0);
+	}
+    }
+  else
+    {
+      /* Not a character literal. */
+      return (0);
+    }
+  yylval.typed_val.val = ival;
+  yylval.typed_val.type = builtin_type_chill_char;
+  lexptr = tokptr;
+  return (CHARACTER_LITERAL);
+}
+
+/* Recognize an integer literal, as specified in Z.200 sec 5.2.4.2.
+   Note that according to 5.2.4.2, a single "_" is also a valid integer
+   literal, however GNU-chill requires there to be at least one "digit"
+   in any integer literal. */
+
+static enum ch_terminal
+match_integer_literal ()
+{
+  char *tokptr = lexptr;
+  LONGEST ival;
+  
+  if (!decode_integer_literal (&ival, &tokptr))
+    {
+      return (0);
+    }
+  else 
+    {
+      yylval.typed_val.val = ival;
+#if defined(CC_HAS_LONG_LONG) && defined(__STDC__)
+      if (ival > (LONGEST)2147483647U || ival < -(LONGEST)2147483648U)
+	yylval.typed_val.type = builtin_type_long_long;
+      else
+#endif
+	yylval.typed_val.type = builtin_type_int;
+      lexptr = tokptr;
+      return (INTEGER_LITERAL);
+    }
+}
+
+/* Recognize a bit-string literal, as specified in Z.200 sec 5.2.4.8
+   Note that according to 5.2.4.8, a single "_" is also a valid bit-string
+   literal, however GNU-chill requires there to be at least one "digit"
+   in any bit-string literal. */
+
+static enum ch_terminal
+match_bitstring_literal ()
+{
+  register char *tokptr = lexptr;
+  int bitoffset = 0;
+  int bitcount = 0;
+  int bits_per_char;
+  int digit;
+  
+  tempbufindex = 0;
+  CHECKBUF (1);
+  tempbuf[0] = 0;
+
+  /* Look for the required explicit base specifier. */
+  
+  switch (*tokptr++)
+    {
+    case 'b':
+    case 'B':
+      bits_per_char = 1;
+      break;
+    case 'o':
+    case 'O':
+      bits_per_char = 3;
+      break;
+    case 'h':
+    case 'H':
+      bits_per_char = 4;
+      break;
+    default:
+      return (0);
+      break;
+    }
+
+  /* Ensure that the character after the explicit base is a single quote. */
+  
+  if (*tokptr++ != '\'')
+    {
+      return (0);
+    }
+  
+  while (*tokptr != '\0' && *tokptr != '\'')
+    {
+      digit = *tokptr;
+      if (isupper (digit))
+        digit = tolower (digit);
+      tokptr++;
+      switch (digit)
+	{
+	  case '_':
+	    continue;
+	  case '0':  case '1':  case '2':  case '3':  case '4':
+	  case '5':  case '6':  case '7':  case '8':  case '9':
+	    digit -= '0';
+	    break;
+	  case 'a':  case 'b':  case 'c':  case 'd':  case 'e': case 'f':
+	    digit -= 'a';
+	    digit += 10;
+	    break;
+	  default:
+	    /* this is not a bitstring literal, probably an integer */
+	    return 0;
+	}
+      if (digit >= 1 << bits_per_char)
+	{
+	  /* Found something not in domain for current base. */
+	  error ("Too-large digit in bitstring or integer.");
+	}
+      else
+	{
+	  /* Extract bits from digit, packing them into the bitstring byte. */
+	  int k = TARGET_BYTE_ORDER == BIG_ENDIAN ? bits_per_char - 1 : 0;
+	  for (; TARGET_BYTE_ORDER == BIG_ENDIAN ? k >= 0 : k < bits_per_char;
+	       TARGET_BYTE_ORDER == BIG_ENDIAN ? k-- : k++)
+	    {
+	      bitcount++;
+	      if (digit & (1 << k))
+		{
+		  tempbuf[tempbufindex] |=
+		    (TARGET_BYTE_ORDER == BIG_ENDIAN)
+		      ? (1 << (HOST_CHAR_BIT - 1 - bitoffset))
+			: (1 << bitoffset);
+		}
+	      bitoffset++;
+	      if (bitoffset == HOST_CHAR_BIT)
+		{
+		  bitoffset = 0;
+		  tempbufindex++;
+		  CHECKBUF(1);
+		  tempbuf[tempbufindex] = 0;
+		}
+	    }
+	}
+    }
+  
+  /* Verify that we consumed everything up to the trailing single quote,
+     and that we found some bits (IE not just underbars). */
+
+  if (*tokptr++ != '\'')
+    {
+      return (0);
+    }
+  else 
+    {
+      yylval.sval.ptr = tempbuf;
+      yylval.sval.length = bitcount;
+      lexptr = tokptr;
+      return (BIT_STRING_LITERAL);
+    }
+}
+
+struct token
+{
+  char *operator;
+  int token;
+};
+
+static const struct token idtokentab[] =
+{
+    { "array", ARRAY },
+    { "length", LENGTH },
+    { "lower", LOWER },
+    { "upper", UPPER },
+    { "andif", ANDIF },
+    { "pred", PRED },
+    { "succ", SUCC },
+    { "card", CARD },
+    { "size", SIZE },
+    { "orif", ORIF },
+    { "num", NUM },
+    { "abs", ABS },
+    { "max", MAX_TOKEN },
+    { "min", MIN_TOKEN },
+    { "mod", MOD },
+    { "rem", REM },
+    { "not", NOT },
+    { "xor", LOGXOR },
+    { "and", LOGAND },
+    { "in", IN },
+    { "or", LOGIOR },
+    { "up", UP },
+    { "addr", ADDR_TOKEN },
+    { "null", EMPTINESS_LITERAL }
+};
+
+static const struct token tokentab2[] =
+{
+    { ":=", GDB_ASSIGNMENT },
+    { "//", SLASH_SLASH },
+    { "->", POINTER },
+    { "/=", NOTEQUAL },
+    { "<=", LEQ },
+    { ">=", GEQ }
+};
+
+/* Read one token, getting characters through lexptr.  */
+/* This is where we will check to make sure that the language and the
+   operators used are compatible.  */
+
+static enum ch_terminal
+ch_lex ()
+{
+    unsigned int i;
+    enum ch_terminal token;
+    char *inputname;
+    struct symbol *sym;
+
+    /* Skip over any leading whitespace. */
+    while (isspace (*lexptr))
+	{
+	    lexptr++;
+	}
+    /* Look for special single character cases which can't be the first
+       character of some other multicharacter token. */
+    switch (*lexptr)
+	{
+	    case '\0':
+	        return END_TOKEN;
+	    case ',':
+	    case '=':
+	    case ';':
+	    case '!':
+	    case '+':
+	    case '*':
+	    case '(':
+	    case ')':
+	    case '[':
+	    case ']':
+		return (*lexptr++);
+	}
+    /* Look for characters which start a particular kind of multicharacter
+       token, such as a character literal, register name, convenience
+       variable name, string literal, etc. */
+    switch (*lexptr)
+      {
+	case '\'':
+	case '\"':
+	  /* First try to match a string literal, which is any
+	     sequence of characters enclosed in matching single or double
+	     quotes, except that a single character inside single quotes
+	     is a character literal, so we have to catch that case also. */
+	  token = match_string_literal ();
+	  if (token != 0)
+	    {
+	      return (token);
+	    }
+	  if (*lexptr == '\'')
+	    {
+	      token = match_character_literal ();
+	      if (token != 0)
+		{
+		  return (token);
+		}
+	    }
+	  break;
+        case 'C':
+        case 'c':
+	  token = match_character_literal ();
+	  if (token != 0)
+	    {
+	      return (token);
+	    }
+	  break;
+	case '$':
+	  yylval.sval.ptr = lexptr;
+	  do {
+	    lexptr++;
+	  } while (isalnum (*lexptr) || *lexptr == '_' || *lexptr == '$');
+	  yylval.sval.length = lexptr - yylval.sval.ptr;
+	  write_dollar_variable (yylval.sval);
+	  return GDB_VARIABLE;
+	  break;
+      }
+    /* See if it is a special token of length 2.  */
+    for (i = 0; i < sizeof (tokentab2) / sizeof (tokentab2[0]); i++)
+	{
+	    if (STREQN (lexptr, tokentab2[i].operator, 2))
+		{
+		    lexptr += 2;
+		    return (tokentab2[i].token);
+		}
+	}
+    /* Look for single character cases which which could be the first
+       character of some other multicharacter token, but aren't, or we
+       would already have found it. */
+    switch (*lexptr)
+	{
+	    case '-':
+	    case ':':
+	    case '/':
+	    case '<':
+	    case '>':
+		return (*lexptr++);
+	}
+    /* Look for a float literal before looking for an integer literal, so
+       we match as much of the input stream as possible. */
+    token = match_float_literal ();
+    if (token != 0)
+	{
+	    return (token);
+	}
+    token = match_bitstring_literal ();
+    if (token != 0)
+	{
+	    return (token);
+	}
+    token = match_integer_literal ();
+    if (token != 0)
+	{
+	    return (token);
+	}
+
+    /* Try to match a simple name string, and if a match is found, then
+       further classify what sort of name it is and return an appropriate
+       token.  Note that attempting to match a simple name string consumes
+       the token from lexptr, so we can't back out if we later find that
+       we can't classify what sort of name it is. */
+
+    inputname = match_simple_name_string ();
+
+    if (inputname != NULL)
+      {
+	char *simplename = (char*) alloca (strlen (inputname) + 1);
+
+	char *dptr = simplename, *sptr = inputname;
+	for (; *sptr; sptr++)
+	  *dptr++ = isupper (*sptr) ? tolower(*sptr) : *sptr;
+	*dptr = '\0';
+
+	/* See if it is a reserved identifier. */
+	for (i = 0; i < sizeof (idtokentab) / sizeof (idtokentab[0]); i++)
+	    {
+		if (STREQ (simplename, idtokentab[i].operator))
+		    {
+			return (idtokentab[i].token);
+		    }
+	    }
+
+	/* Look for other special tokens. */
+	if (STREQ (simplename, "true"))
+	    {
+		yylval.ulval = 1;
+		return (BOOLEAN_LITERAL);
+	    }
+	if (STREQ (simplename, "false"))
+	    {
+		yylval.ulval = 0;
+		return (BOOLEAN_LITERAL);
+	    }
+
+	sym = lookup_symbol (inputname, expression_context_block,
+			     VAR_NAMESPACE, (int *) NULL,
+			     (struct symtab **) NULL);
+	if (sym == NULL && strcmp (inputname, simplename) != 0)
+	  {
+	    sym = lookup_symbol (simplename, expression_context_block,
+				 VAR_NAMESPACE, (int *) NULL,
+				 (struct symtab **) NULL);
+	  }
+	if (sym != NULL)
+	  {
+	    yylval.ssym.stoken.ptr = NULL;
+	    yylval.ssym.stoken.length = 0;
+	    yylval.ssym.sym = sym;
+	    yylval.ssym.is_a_field_of_this = 0;	/* FIXME, C++'ism */
+	    switch (SYMBOL_CLASS (sym))
+	      {
+	      case LOC_BLOCK:
+		/* Found a procedure name. */
+		return (GENERAL_PROCEDURE_NAME);
+	      case LOC_STATIC:
+		/* Found a global or local static variable. */
+		return (LOCATION_NAME);
+	      case LOC_REGISTER:
+	      case LOC_ARG:
+	      case LOC_REF_ARG:
+	      case LOC_REGPARM:
+	      case LOC_REGPARM_ADDR:
+	      case LOC_LOCAL:
+	      case LOC_LOCAL_ARG:
+	      case LOC_BASEREG:
+	      case LOC_BASEREG_ARG:
+		if (innermost_block == NULL
+		    || contained_in (block_found, innermost_block))
+		  {
+		    innermost_block = block_found;
+		  }
+		return (LOCATION_NAME);
+		break;
+	      case LOC_CONST:
+	      case LOC_LABEL:
+		return (LOCATION_NAME);
+		break;
+	      case LOC_TYPEDEF:
+		yylval.tsym.type = SYMBOL_TYPE (sym);
+		return TYPENAME;
+	      case LOC_UNDEF:
+	      case LOC_CONST_BYTES:
+	      case LOC_OPTIMIZED_OUT:
+		error ("Symbol \"%s\" names no location.", inputname);
+		break;
+	      case LOC_UNRESOLVED:
+		error ("unhandled SYMBOL_CLASS in ch_lex()");
+		break;
+	      }
+	  }
+	else if (!have_full_symbols () && !have_partial_symbols ())
+	  {
+	    error ("No symbol table is loaded.  Use the \"file\" command.");
+	  }
+	else
+	  {
+	    error ("No symbol \"%s\" in current context.", inputname);
+	  }
+      }
+
+    /* Catch single character tokens which are not part of some
+       longer token. */
+
+    switch (*lexptr)
+      {
+	case '.':			/* Not float for example. */
+	  lexptr++;
+	  while (isspace (*lexptr)) lexptr++;
+	  inputname = match_simple_name_string ();
+	  if (!inputname)
+	    return '.';
+	  return DOT_FIELD_NAME;
+      }
+
+    return (ILLEGAL_TOKEN);
+}
+
+static void
+write_lower_upper_value (opcode, type)
+     enum exp_opcode opcode;  /* Either UNOP_LOWER or UNOP_UPPER */
+     struct type *type;
+{
+  if (type == NULL)
+    write_exp_elt_opcode (opcode);
+  else
+    {
+      struct type *result_type;
+      LONGEST val = type_lower_upper (opcode, type, &result_type);
+      write_exp_elt_opcode (OP_LONG);
+      write_exp_elt_type (result_type);
+      write_exp_elt_longcst (val);
+      write_exp_elt_opcode (OP_LONG);
+    }
+}
+
+void
+chill_error (msg)
+     char *msg;
+{
+  /* Never used. */
+}
diff --git a/gdb/ch-lang.c b/gdb/ch-lang.c
new file mode 100644
index 0000000..c54e8bb
--- /dev/null
+++ b/gdb/ch-lang.c
@@ -0,0 +1,675 @@
+/* Chill language support routines for GDB, the GNU debugger.
+   Copyright 1992, 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "ch-lang.h"
+
+static value_ptr
+evaluate_subexp_chill PARAMS ((struct type *, struct expression *, int *, enum noside));
+
+static value_ptr
+value_chill_max_min PARAMS ((enum exp_opcode, value_ptr));
+
+static value_ptr
+value_chill_card PARAMS ((value_ptr));
+
+static value_ptr
+ value_chill_length PARAMS ((value_ptr));
+
+static struct type *
+chill_create_fundamental_type PARAMS ((struct objfile *, int));
+
+static void
+chill_printstr PARAMS ((GDB_FILE *stream, char *string, unsigned int length, int width, int force_ellipses));
+
+static void
+chill_printchar PARAMS ((int, GDB_FILE *));
+
+/* For now, Chill uses a simple mangling algorithm whereby you simply
+   discard everything after the occurance of two successive CPLUS_MARKER
+   characters to derive the demangled form. */
+
+char *
+chill_demangle (mangled)
+     const char *mangled;
+{
+  const char *joiner = NULL;
+  char *demangled;
+  const char *cp = mangled;
+
+  while (*cp)
+    {
+      if (is_cplus_marker (*cp))
+	{
+	  joiner = cp;
+	  break;
+	}
+      cp++;
+    }
+  if (joiner != NULL && *(joiner + 1) == *joiner)
+    {
+      demangled = savestring (mangled, joiner - mangled);
+    }
+  else
+    {
+      demangled = NULL;
+    }
+  return (demangled);
+}
+
+static void
+chill_printchar (c, stream)
+     register int c;
+     GDB_FILE *stream;
+{
+  c &= 0xFF;			/* Avoid sign bit follies */
+
+  if (PRINT_LITERAL_FORM (c))
+    {
+      if (c == '\'' || c == '^')
+	fprintf_filtered (stream, "'%c%c'", c, c);
+      else
+	fprintf_filtered (stream, "'%c'", c);
+    }
+  else
+    {
+      fprintf_filtered (stream, "'^(%u)'", (unsigned int) c);
+    }
+}
+
+/* Print the character string STRING, printing at most LENGTH characters.
+   Printing stops early if the number hits print_max; repeat counts
+   are printed as appropriate.  Print ellipses at the end if we
+   had to stop before printing LENGTH characters, or if FORCE_ELLIPSES.
+   Note that gdb maintains the length of strings without counting the
+   terminating null byte, while chill strings are typically written with
+   an explicit null byte.  So we always assume an implied null byte
+   until gdb is able to maintain non-null terminated strings as well
+   as null terminated strings (FIXME).
+  */
+
+static void
+chill_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  register unsigned int i;
+  unsigned int things_printed = 0;
+  int in_literal_form = 0;
+  int in_control_form = 0;
+  int need_slashslash = 0;
+  unsigned int c;
+  extern int repeat_count_threshold;
+  extern int print_max;
+
+  if (length == 0)
+    {
+      fputs_filtered ("\"\"", stream);
+      return;
+    }
+
+  for (i = 0; i < length && things_printed < print_max; ++i)
+    {
+      /* Position of the character we are examining
+	 to see whether it is repeated.  */
+      unsigned int rep1;
+      /* Number of repetitions we have detected so far.  */
+      unsigned int reps;
+
+      QUIT;
+
+      if (need_slashslash)
+	{
+	  fputs_filtered ("//", stream);
+	  need_slashslash = 0;
+	}
+
+      rep1 = i + 1;
+      reps = 1;
+      while (rep1 < length && string[rep1] == string[i])
+	{
+	  ++rep1;
+	  ++reps;
+	}
+
+      c = string[i];
+      if (reps > repeat_count_threshold)
+	{
+	  if (in_control_form || in_literal_form)
+	    {
+	      if (in_control_form)
+		fputs_filtered (")", stream);
+	      fputs_filtered ("\"//", stream);
+	      in_control_form = in_literal_form = 0;
+	    }
+	  chill_printchar (c, stream);
+	  fprintf_filtered (stream, "<repeats %u times>", reps);
+	  i = rep1 - 1;
+	  things_printed += repeat_count_threshold;
+	  need_slashslash = 1;
+	}
+      else
+	{
+	  if (! in_literal_form && ! in_control_form)
+	    fputs_filtered ("\"", stream);
+	  if (PRINT_LITERAL_FORM (c))
+	    {
+	      if (!in_literal_form)
+		{
+		  if (in_control_form)
+		    {
+		      fputs_filtered (")", stream);
+		      in_control_form = 0;
+		    }
+		  in_literal_form = 1;
+		}
+	      fprintf_filtered (stream, "%c", c);
+	      if (c == '"' || c == '^')
+		/* duplicate this one as must be done at input */
+		fprintf_filtered (stream, "%c", c);
+	    }
+	  else
+	    {
+	      if (!in_control_form)
+		{
+		  if (in_literal_form)
+		    {
+		      in_literal_form = 0;
+		    }
+		  fputs_filtered ("^(", stream);
+		  in_control_form = 1;
+		}
+	      else
+		fprintf_filtered (stream, ",");
+	      c = c & 0xff;
+	      fprintf_filtered (stream, "%u", (unsigned int) c);
+	    }
+	  ++things_printed;
+	}
+    }
+
+  /* Terminate the quotes if necessary.  */
+  if (in_control_form)
+    {
+      fputs_filtered (")", stream);
+    }
+  if (in_literal_form || in_control_form)
+    {
+      fputs_filtered ("\"", stream);
+    }
+  if (force_ellipses || (i < length))
+    {
+      fputs_filtered ("...", stream);
+    }
+}
+
+static struct type *
+chill_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  register struct type *type = NULL;
+
+  switch (typeid)
+    {
+      default:
+	/* FIXME:  For now, if we are asked to produce a type not in this
+	   language, create the equivalent of a C integer type with the
+	   name "<?type?>".  When all the dust settles from the type
+	   reconstruction work, this should probably become an error. */
+	type = init_type (TYPE_CODE_INT, 2, 0, "<?type?>", objfile);
+        warning ("internal error: no chill fundamental type %d", typeid);
+	break;
+      case FT_VOID:
+	/* FIXME:  Currently the GNU Chill compiler emits some DWARF entries for
+	   typedefs, unrelated to anything directly in the code being compiled,
+	   that have some FT_VOID types.  Just fake it for now. */
+	type = init_type (TYPE_CODE_VOID, 0, 0, "<?VOID?>", objfile);
+	break;
+      case FT_BOOLEAN:
+	type = init_type (TYPE_CODE_BOOL, 1, TYPE_FLAG_UNSIGNED, "BOOL", objfile);
+	break;
+      case FT_CHAR:
+	type = init_type (TYPE_CODE_CHAR, 1, TYPE_FLAG_UNSIGNED, "CHAR", objfile);
+	break;
+      case FT_SIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT, 1, 0, "BYTE", objfile);
+	break;
+      case FT_UNSIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT, 1, TYPE_FLAG_UNSIGNED, "UBYTE", objfile);
+	break;
+      case FT_SHORT:			/* Chill ints are 2 bytes */
+	type = init_type (TYPE_CODE_INT, 2, 0, "INT", objfile);
+	break;
+      case FT_UNSIGNED_SHORT:		/* Chill ints are 2 bytes */
+	type = init_type (TYPE_CODE_INT, 2, TYPE_FLAG_UNSIGNED, "UINT", objfile);
+	break;
+      case FT_INTEGER:			/* FIXME? */
+      case FT_SIGNED_INTEGER:		/* FIXME? */
+      case FT_LONG:			/* Chill longs are 4 bytes */
+      case FT_SIGNED_LONG:		/* Chill longs are 4 bytes */
+	type = init_type (TYPE_CODE_INT, 4, 0, "LONG", objfile);
+	break;
+      case FT_UNSIGNED_INTEGER:		/* FIXME? */
+      case FT_UNSIGNED_LONG:		/* Chill longs are 4 bytes */
+	type = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED, "ULONG", objfile);
+	break;
+      case FT_FLOAT:
+	type = init_type (TYPE_CODE_FLT, 4, 0, "REAL", objfile);
+	break;
+      case FT_DBL_PREC_FLOAT:
+	type = init_type (TYPE_CODE_FLT, 8, 0, "LONG_REAL", objfile);
+	break;
+      }
+  return (type);
+}
+
+
+/* Table of operators and their precedences for printing expressions.  */
+
+static const struct op_print chill_op_print_tab[] = {
+    {"AND", BINOP_LOGICAL_AND, PREC_LOGICAL_AND, 0},
+    {"OR",  BINOP_LOGICAL_OR, PREC_LOGICAL_OR, 0},
+    {"NOT", UNOP_LOGICAL_NOT, PREC_PREFIX, 0},
+    {"MOD", BINOP_MOD, PREC_MUL, 0},
+    {"REM", BINOP_REM, PREC_MUL, 0},
+    {"SIZE",UNOP_SIZEOF, PREC_BUILTIN_FUNCTION, 0},
+    {"LOWER",UNOP_LOWER, PREC_BUILTIN_FUNCTION, 0},
+    {"UPPER",UNOP_UPPER, PREC_BUILTIN_FUNCTION, 0},
+    {"CARD",UNOP_CARD, PREC_BUILTIN_FUNCTION, 0},
+    {"MAX",UNOP_CHMAX, PREC_BUILTIN_FUNCTION, 0},
+    {"MIN",UNOP_CHMIN, PREC_BUILTIN_FUNCTION, 0},
+    {":=",  BINOP_ASSIGN, PREC_ASSIGN, 1},
+    {"=",   BINOP_EQUAL, PREC_EQUAL, 0},
+    {"/=",  BINOP_NOTEQUAL, PREC_EQUAL, 0},
+    {"<=",  BINOP_LEQ, PREC_ORDER, 0},
+    {">=",  BINOP_GEQ, PREC_ORDER, 0},
+    {">",   BINOP_GTR, PREC_ORDER, 0},
+    {"<",   BINOP_LESS, PREC_ORDER, 0},
+    {"+",   BINOP_ADD, PREC_ADD, 0},
+    {"-",   BINOP_SUB, PREC_ADD, 0},
+    {"*",   BINOP_MUL, PREC_MUL, 0},
+    {"/",   BINOP_DIV, PREC_MUL, 0},
+    {"//",  BINOP_CONCAT, PREC_PREFIX, 0},	/* FIXME: precedence? */
+    {"-",   UNOP_NEG, PREC_PREFIX, 0},
+    {"->",  UNOP_IND, PREC_SUFFIX, 1},
+    {"->",  UNOP_ADDR, PREC_PREFIX, 0},
+    {":",   BINOP_RANGE, PREC_ASSIGN, 0},
+    {NULL,  0, 0, 0}
+};
+
+/* The built-in types of Chill.  */
+
+struct type *builtin_type_chill_bool;
+struct type *builtin_type_chill_char;
+struct type *builtin_type_chill_long;
+struct type *builtin_type_chill_ulong;
+struct type *builtin_type_chill_real;
+
+struct type ** CONST_PTR (chill_builtin_types[]) = 
+{
+  &builtin_type_chill_bool,
+  &builtin_type_chill_char,
+  &builtin_type_chill_long,
+  &builtin_type_chill_ulong,
+  &builtin_type_chill_real,
+  0
+};
+
+/* Calculate LOWER or UPPER of TYPE.
+   Returns the result as an integer.
+   *RESULT_TYPE is the appropriate type for the result. */
+
+LONGEST
+type_lower_upper (op, type, result_type)
+     enum exp_opcode op;  /* Either UNOP_LOWER or UNOP_UPPER */
+     struct type *type;
+     struct type **result_type;
+{
+  LONGEST low, high;
+  *result_type = type;
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_STRUCT:
+      *result_type = builtin_type_int;
+      if (chill_varying_type (type))
+	return type_lower_upper (op, TYPE_FIELD_TYPE (type, 1), result_type);
+      break;
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_STRING:
+      type = TYPE_FIELD_TYPE (type, 0);  /* Get index type */
+
+      /* ... fall through ... */
+    case TYPE_CODE_RANGE:
+      *result_type = TYPE_TARGET_TYPE (type);
+      return op == UNOP_LOWER ? TYPE_LOW_BOUND (type) : TYPE_HIGH_BOUND (type);
+
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_CHAR:
+      if (get_discrete_bounds (type, &low, &high) >= 0)
+	{
+	  *result_type = type;
+	  return op == UNOP_LOWER ? low : high;
+	}
+      break;
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_FUNC:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_REF:
+    case TYPE_CODE_COMPLEX:
+    default:
+      break;
+    }
+  error ("unknown mode for LOWER/UPPER builtin");
+}
+
+static value_ptr
+value_chill_length (val)
+     value_ptr val;
+{
+  LONGEST tmp;
+  struct type *type = VALUE_TYPE (val);
+  struct type *ttype;
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_STRING:
+      tmp = type_lower_upper (UNOP_UPPER, type, &ttype)
+	- type_lower_upper (UNOP_LOWER, type, &ttype) + 1;
+      break;
+    case TYPE_CODE_STRUCT:
+      if (chill_varying_type (type))
+	{
+	  tmp = unpack_long (TYPE_FIELD_TYPE (type, 0), VALUE_CONTENTS (val));
+	  break;
+	}
+      /* ... else fall through ... */
+    default:
+      error ("bad argument to LENGTH builtin");
+    }
+  return value_from_longest (builtin_type_int, tmp);
+}
+
+static value_ptr
+value_chill_card (val)
+     value_ptr val;
+{
+  LONGEST tmp = 0;
+  struct type *type = VALUE_TYPE (val);
+  CHECK_TYPEDEF (type);
+
+  if (TYPE_CODE (type) == TYPE_CODE_SET)
+    {
+      struct type *range_type = TYPE_INDEX_TYPE (type);
+      LONGEST lower_bound, upper_bound;
+      int i;
+
+      get_discrete_bounds (range_type, &lower_bound, &upper_bound);
+      for (i = lower_bound; i <= upper_bound; i++)
+	if (value_bit_index (type, VALUE_CONTENTS (val), i) > 0)
+	  tmp++;
+    }
+  else
+    error ("bad argument to CARD builtin");
+
+  return value_from_longest (builtin_type_int, tmp);
+}
+
+static value_ptr
+value_chill_max_min (op, val)
+     enum exp_opcode op;
+     value_ptr val;
+{
+  LONGEST tmp = 0;
+  struct type *type = VALUE_TYPE (val);
+  struct type *elttype;
+  CHECK_TYPEDEF (type);
+
+  if (TYPE_CODE (type) == TYPE_CODE_SET)
+    {
+      LONGEST lower_bound, upper_bound;
+      int i, empty = 1;
+
+      elttype = TYPE_INDEX_TYPE (type);
+      CHECK_TYPEDEF (elttype);
+      get_discrete_bounds (elttype, &lower_bound, &upper_bound);
+
+      if (op == UNOP_CHMAX)
+	{
+	  for (i = upper_bound; i >= lower_bound; i--)
+	    {
+	      if (value_bit_index (type, VALUE_CONTENTS (val), i) > 0)
+		{
+		  tmp = i;
+		  empty = 0;
+		  break;
+		}
+	    }
+	}
+      else
+	{
+	  for (i = lower_bound; i <= upper_bound; i++)
+	    {
+	      if (value_bit_index (type, VALUE_CONTENTS (val), i) > 0)
+		{
+		  tmp = i;
+		  empty = 0;
+		  break;
+		}
+	    }
+	}
+      if (empty)
+	error ("%s for empty powerset", op == UNOP_CHMAX ? "MAX" : "MIN");
+    }
+  else
+    error ("bad argument to %s builtin", op == UNOP_CHMAX ? "MAX" : "MIN");
+
+  return value_from_longest (TYPE_CODE (elttype) == TYPE_CODE_RANGE
+			       ? TYPE_TARGET_TYPE (elttype)
+			       : elttype,
+			     tmp);
+}
+
+static value_ptr
+evaluate_subexp_chill (expect_type, exp, pos, noside)
+     struct type *expect_type;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  int pc = *pos;
+  struct type *type;
+  int tem, nargs;
+  value_ptr arg1;
+  value_ptr *argvec;
+  enum exp_opcode op = exp->elts[*pos].opcode;
+  switch (op)
+    {
+    case MULTI_SUBSCRIPT:
+      if (noside == EVAL_SKIP)
+	break;
+      (*pos) += 3;
+      nargs = longest_to_int (exp->elts[pc + 1].longconst);
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      type = check_typedef (VALUE_TYPE (arg1));
+
+      if (nargs == 1 && TYPE_CODE (type) == TYPE_CODE_INT)
+	{
+	  /* Looks like string repetition. */
+	  value_ptr string = evaluate_subexp_with_coercion (exp, pos, noside);
+	  return value_concat (arg1, string);
+	}
+
+      switch (TYPE_CODE (type))
+	{
+	case TYPE_CODE_PTR:
+	  type = check_typedef (TYPE_TARGET_TYPE (type));
+	  if (!type || TYPE_CODE (type) != TYPE_CODE_FUNC)
+	    error ("reference value used as function");
+	  /* ... fall through ... */
+	case TYPE_CODE_FUNC:
+	  /* It's a function call. */
+	  if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	    break;
+
+	  /* Allocate arg vector, including space for the function to be
+	     called in argvec[0] and a terminating NULL */
+	  argvec = (value_ptr *) alloca (sizeof (value_ptr) * (nargs + 2));
+	  argvec[0] = arg1;
+	  tem = 1;
+	  for (; tem <= nargs && tem <= TYPE_NFIELDS (type); tem++)
+	    {
+	      argvec[tem]
+		= evaluate_subexp_chill (TYPE_FIELD_TYPE (type, tem-1),
+					 exp, pos, noside);
+	    }
+	  for (; tem <= nargs; tem++)
+	    argvec[tem] = evaluate_subexp_with_coercion (exp, pos, noside);
+	  argvec[tem] = 0; /* signal end of arglist */
+
+	  return call_function_by_hand (argvec[0], nargs, argvec + 1);
+	default:
+	  break;
+	}
+
+      while (nargs-- > 0)
+	{
+	  value_ptr index = evaluate_subexp_with_coercion (exp, pos, noside);
+	  arg1 = value_subscript (arg1, index);
+	}
+      return (arg1);
+
+    case UNOP_LOWER:
+    case UNOP_UPPER:
+      (*pos)++;
+      if (noside == EVAL_SKIP)
+	{
+	  (*exp->language_defn->evaluate_exp) (NULL_TYPE, exp, pos, EVAL_SKIP);
+	  goto nosideret;
+	}
+      arg1 = (*exp->language_defn->evaluate_exp) (NULL_TYPE, exp, pos,
+						  EVAL_AVOID_SIDE_EFFECTS);
+      tem = type_lower_upper (op, VALUE_TYPE (arg1), &type);
+      return value_from_longest (type, tem);
+
+    case UNOP_LENGTH:
+      (*pos)++;
+      arg1 = (*exp->language_defn->evaluate_exp) (NULL_TYPE, exp, pos, noside);
+      return value_chill_length (arg1);
+
+    case UNOP_CARD:
+      (*pos)++;
+      arg1 = (*exp->language_defn->evaluate_exp) (NULL_TYPE, exp, pos, noside);
+      return value_chill_card (arg1);
+
+    case UNOP_CHMAX:
+    case UNOP_CHMIN:
+      (*pos)++;
+      arg1 = (*exp->language_defn->evaluate_exp) (NULL_TYPE, exp, pos, noside);
+      return value_chill_max_min (op, arg1);
+
+    case BINOP_COMMA:
+      error ("',' operator used in invalid context");
+
+    default:
+      break;
+    }
+
+  return evaluate_subexp_standard (expect_type, exp, pos, noside);
+ nosideret:
+  return value_from_longest (builtin_type_long, (LONGEST) 1);
+}
+
+const struct language_defn chill_language_defn = {
+  "chill",
+  language_chill,
+  chill_builtin_types,
+  range_check_on,
+  type_check_on,
+  chill_parse,			/* parser */
+  chill_error,			/* parser error function */
+  evaluate_subexp_chill,
+  chill_printchar,		/* print a character constant */
+  chill_printstr,		/* function to print a string constant */
+  NULL,				/* Function to print a single char */
+  chill_create_fundamental_type,/* Create fundamental type in this language */
+  chill_print_type,		/* Print a type using appropriate syntax */
+  chill_val_print,		/* Print a value using appropriate syntax */
+  chill_value_print,		/* Print a top-levl value */
+  {"",      "B'",  "",   ""},	/* Binary format info */
+  {"O'%lo",  "O'",  "o",  ""},	/* Octal format info */
+  {"D'%ld",  "D'",  "d",  ""},	/* Decimal format info */
+  {"H'%lx",  "H'",  "x",  ""},	/* Hex format info */
+  chill_op_print_tab,		/* expression operators for printing */
+  0,				/* arrays are first-class (not c-style) */
+  0,				/* String lower bound */
+  &builtin_type_chill_char,	/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+/* Initialization for Chill */
+
+void
+_initialize_chill_language ()
+{
+  builtin_type_chill_bool =
+    init_type (TYPE_CODE_BOOL, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "BOOL", (struct objfile *) NULL);
+  builtin_type_chill_char =
+    init_type (TYPE_CODE_CHAR, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "CHAR", (struct objfile *) NULL);
+  builtin_type_chill_long =
+    init_type (TYPE_CODE_INT, TARGET_LONG_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "LONG", (struct objfile *) NULL);
+  builtin_type_chill_ulong =
+    init_type (TYPE_CODE_INT, TARGET_LONG_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "ULONG", (struct objfile *) NULL);
+  builtin_type_chill_real =
+    init_type (TYPE_CODE_FLT, TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "LONG_REAL", (struct objfile *) NULL);
+
+  add_language (&chill_language_defn);
+}
diff --git a/gdb/ch-lang.h b/gdb/ch-lang.h
new file mode 100644
index 0000000..6525c30
--- /dev/null
+++ b/gdb/ch-lang.h
@@ -0,0 +1,42 @@
+/* Chill language support definitions for GDB, the GNU debugger.
+   Copyright 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct value;
+#endif
+
+extern int
+chill_parse PARAMS ((void));	/* Defined in ch-exp.y */
+
+extern void
+chill_error PARAMS ((char *));	/* Defined in ch-exp.y */
+
+extern void			/* Defined in ch-typeprint.c */
+chill_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+extern int
+chill_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *, int, int,
+			 int, enum val_prettyprint));
+
+extern int
+chill_value_print PARAMS ((struct value *, GDB_FILE *,
+			   int, enum val_prettyprint));
+
+extern LONGEST
+type_lower_upper PARAMS ((enum exp_opcode, struct type *, struct type **));
diff --git a/gdb/ch-typeprint.c b/gdb/ch-typeprint.c
new file mode 100644
index 0000000..a6b1944
--- /dev/null
+++ b/gdb/ch-typeprint.c
@@ -0,0 +1,346 @@
+/* Support for printing Chill types for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bfd.h"		/* Binary File Description */
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "demangle.h"
+#include "ch-lang.h"
+#include "typeprint.h"
+
+#include "gdb_string.h"
+#include <errno.h>
+
+static void
+chill_type_print_base PARAMS ((struct type *, GDB_FILE *, int, int));
+
+void
+chill_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  if (varstring != NULL && *varstring != '\0')
+    {
+      fputs_filtered (varstring, stream);
+      fputs_filtered (" ", stream);
+    }
+  chill_type_print_base (type, stream, show, level);
+}
+
+/* Print the name of the type (or the ultimate pointer target,
+   function value or array element).
+
+   SHOW nonzero means don't print this type as just its name;
+   show its real definition even if it has a name.
+   SHOW zero means print just typename or tag if there is one
+   SHOW negative means abbreviate structure elements.
+   SHOW is decremented for printing of structure elements.
+
+   LEVEL is the depth to indent by.
+   We increase it for some recursive calls.  */
+
+static void
+chill_type_print_base (type, stream, show, level)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  register int len;
+  register int i;
+  struct type *index_type;
+  struct type *range_type;
+  LONGEST low_bound;
+  LONGEST high_bound;
+
+  QUIT;
+
+  wrap_here ("    ");
+  if (type == NULL)
+    {
+      fputs_filtered ("<type unknown>", stream);
+      return;
+    }
+
+  /* When SHOW is zero or less, and there is a valid type name, then always
+     just print the type name directly from the type. */
+
+  if ((show <= 0) && (TYPE_NAME (type) != NULL))
+    {
+      fputs_filtered (TYPE_NAME (type), stream);
+      return;
+    }
+
+  if (TYPE_CODE (type) != TYPE_CODE_TYPEDEF)
+    CHECK_TYPEDEF (type);
+
+  switch (TYPE_CODE (type))
+    {
+      case TYPE_CODE_TYPEDEF:
+        chill_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+	break;
+      case TYPE_CODE_PTR:
+	if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_VOID)
+	  {
+	    fprintf_filtered (stream,
+			      TYPE_NAME (type) ? TYPE_NAME (type) : "PTR");
+	    break;
+	  }
+	fprintf_filtered (stream, "REF ");
+	chill_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+	break;
+
+      case TYPE_CODE_BOOL:
+	/* FIXME: we should probably just print the TYPE_NAME, in case
+	   anyone ever fixes the compiler to give us the real names
+	   in the presence of the chill equivalent of typedef (assuming
+	   there is one).  */
+	fprintf_filtered (stream,
+			  TYPE_NAME (type) ? TYPE_NAME (type) : "BOOL");
+	break;
+
+      case TYPE_CODE_ARRAY:
+        fputs_filtered ("ARRAY (", stream);
+	range_type = TYPE_FIELD_TYPE (type, 0);
+	if (TYPE_CODE (range_type) != TYPE_CODE_RANGE)
+	  chill_print_type (range_type, "", stream, 0, level);
+	else
+	  {
+	    index_type = TYPE_TARGET_TYPE (range_type);
+	    low_bound = TYPE_FIELD_BITPOS (range_type, 0);
+	    high_bound = TYPE_FIELD_BITPOS (range_type, 1);
+	    print_type_scalar (index_type, low_bound, stream);
+	    fputs_filtered (":", stream);
+	    print_type_scalar (index_type, high_bound, stream);
+	  }
+	fputs_filtered (") ", stream);
+	chill_print_type (TYPE_TARGET_TYPE (type), "", stream, 0, level);
+	break;
+
+      case TYPE_CODE_BITSTRING:
+        fprintf_filtered (stream, "BOOLS (%d)",
+			  TYPE_FIELD_BITPOS (TYPE_FIELD_TYPE(type,0), 1) + 1);
+	break;
+
+      case TYPE_CODE_SET:
+        fputs_filtered ("POWERSET ", stream);
+	chill_print_type (TYPE_INDEX_TYPE (type), "", stream,
+			  show - 1, level);
+	break;
+
+      case TYPE_CODE_STRING:
+	range_type = TYPE_FIELD_TYPE (type, 0);
+	index_type = TYPE_TARGET_TYPE (range_type);
+	high_bound = TYPE_FIELD_BITPOS (range_type, 1);
+        fputs_filtered ("CHARS (", stream);
+	print_type_scalar (index_type, high_bound + 1, stream);
+	fputs_filtered (")", stream);
+	break;
+
+      case TYPE_CODE_MEMBER:
+	fprintf_filtered (stream, "MEMBER ");
+        chill_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+	break;
+      case TYPE_CODE_REF:
+	fprintf_filtered (stream, "/*LOC*/ ");
+        chill_type_print_base (TYPE_TARGET_TYPE (type), stream, show, level);
+	break;
+      case TYPE_CODE_FUNC:
+	fprintf_filtered (stream, "PROC (");
+	len = TYPE_NFIELDS (type);
+	for (i = 0; i < len; i++)
+	  {
+	    struct type *param_type = TYPE_FIELD_TYPE (type, i);
+	    if (i > 0)
+	      {
+		fputs_filtered (", ", stream);
+		wrap_here ("    ");
+	      }
+	    if (TYPE_CODE (param_type) == TYPE_CODE_REF)
+	      {
+		chill_type_print_base (TYPE_TARGET_TYPE (param_type),
+				       stream, 0, level);
+		fputs_filtered (" LOC", stream);
+	      }
+	    else
+	      chill_type_print_base (param_type, stream, show, level);
+	  }
+	fprintf_filtered (stream, ")");
+	if (TYPE_CODE (TYPE_TARGET_TYPE (type)) != TYPE_CODE_VOID)
+	  {
+	    fputs_filtered (" RETURNS (", stream);
+	    chill_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+	    fputs_filtered (")", stream);
+	  }
+	break;
+
+      case TYPE_CODE_STRUCT:
+	if (chill_varying_type (type))
+	  {
+	    chill_type_print_base (TYPE_FIELD_TYPE (type, 1),
+				   stream, 0, level);
+	    fputs_filtered (" VARYING", stream);
+	  }
+	else
+	  {
+	    fprintf_filtered (stream, "STRUCT ");
+
+	    fprintf_filtered (stream, "(\n");
+	    if ((TYPE_NFIELDS (type) == 0) && (TYPE_NFN_FIELDS (type) == 0))
+	      {
+		if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
+		  {
+		    fprintfi_filtered (level + 4, stream, "<incomplete type>\n");
+		  }
+		else
+		  {
+		    fprintfi_filtered (level + 4, stream, "<no data fields>\n");
+		  }
+	      }
+	    else
+	      {
+		len = TYPE_NFIELDS (type);
+		for (i = TYPE_N_BASECLASSES (type); i < len; i++)
+		  {
+		    struct type *field_type = TYPE_FIELD_TYPE (type, i);
+		    QUIT;
+		    print_spaces_filtered (level + 4, stream);
+		    if (TYPE_CODE (field_type) == TYPE_CODE_UNION)
+		      { int j; /* variant number */
+			fputs_filtered ("CASE OF\n", stream);
+			for (j = 0; j < TYPE_NFIELDS (field_type); j++)
+			  { int k; /* variant field index */
+			    struct type *variant_type
+			      = TYPE_FIELD_TYPE (field_type, j);
+			    int var_len = TYPE_NFIELDS (variant_type);
+			    print_spaces_filtered (level + 4, stream);
+			    if (strcmp (TYPE_FIELD_NAME (field_type, j),
+					"else") == 0)
+			      fputs_filtered ("ELSE\n", stream);
+			    else
+			      fputs_filtered (":\n", stream);
+			    if (TYPE_CODE (variant_type) != TYPE_CODE_STRUCT)
+			      error ("variant record confusion");
+			    for (k = 0; k < var_len; k++)
+			      {
+				print_spaces_filtered (level + 8, stream);
+				chill_print_type (TYPE_FIELD_TYPE (variant_type, k),
+						  TYPE_FIELD_NAME (variant_type, k),
+						  stream, show - 1, level + 8);
+				if (k < (var_len - 1))
+				  fputs_filtered (",", stream);
+				fputs_filtered ("\n", stream);
+			      }
+			  }
+			print_spaces_filtered (level + 4, stream);
+			fputs_filtered ("ESAC", stream);
+		      }
+		    else
+		      chill_print_type (field_type,
+					TYPE_FIELD_NAME (type, i),
+					stream, show - 1, level + 4);
+		    if (i < (len - 1))
+		      {
+			fputs_filtered (",", stream);
+		      }
+		    fputs_filtered ("\n", stream);
+		  }
+	      }
+	    fprintfi_filtered (level, stream, ")");
+	  }
+	break;
+
+      case TYPE_CODE_RANGE:
+	  {
+	    struct type *target = TYPE_TARGET_TYPE (type);
+	    if (target && TYPE_NAME (target))
+	      fputs_filtered (TYPE_NAME (target), stream);
+	    else
+	      fputs_filtered ("RANGE", stream);
+	    if (target == NULL)
+	      target = builtin_type_long;
+	    fputs_filtered (" (", stream);
+	    print_type_scalar (target, TYPE_LOW_BOUND (type), stream);
+	    fputs_filtered (":", stream);
+	    print_type_scalar (target, TYPE_HIGH_BOUND (type), stream);
+	    fputs_filtered (")", stream);
+	  }
+	break;
+
+      case TYPE_CODE_ENUM:
+	{
+	  register int lastval = 0;
+	  fprintf_filtered (stream, "SET (");
+	  len = TYPE_NFIELDS (type);
+	  for (i = 0; i < len; i++)
+	    {
+	      QUIT;
+	      if (i) fprintf_filtered (stream, ", ");
+	      wrap_here ("    ");
+	      fputs_filtered (TYPE_FIELD_NAME (type, i), stream);
+	      if (lastval != TYPE_FIELD_BITPOS (type, i))
+		{
+		  fprintf_filtered (stream, " = %d", TYPE_FIELD_BITPOS (type, i));
+		  lastval = TYPE_FIELD_BITPOS (type, i);
+		}
+	      lastval++;
+	    }
+	  fprintf_filtered (stream, ")");
+	}
+	break;
+
+      case TYPE_CODE_VOID:
+      case TYPE_CODE_UNDEF:
+      case TYPE_CODE_ERROR:
+      case TYPE_CODE_UNION:
+      case TYPE_CODE_METHOD:
+	error ("missing language support in chill_type_print_base");
+	break;
+
+      default:
+
+	/* Handle types not explicitly handled by the other cases,
+	   such as fundamental types.  For these, just print whatever
+	   the type name is, as recorded in the type itself.  If there
+	   is no type name, then complain. */
+
+	if (TYPE_NAME (type) != NULL)
+	  {
+	    fputs_filtered (TYPE_NAME (type), stream);
+	  }
+	else
+	  {
+	    error ("Unrecognized type code (%d) in symbol table.",
+		   TYPE_CODE (type));
+	  }
+	break;
+      }
+}
diff --git a/gdb/ch-valprint.c b/gdb/ch-valprint.c
new file mode 100644
index 0000000..663ba64
--- /dev/null
+++ b/gdb/ch-valprint.c
@@ -0,0 +1,630 @@
+/* Support for printing Chill values for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "valprint.h"
+#include "expression.h"
+#include "value.h"
+#include "language.h"
+#include "demangle.h"
+#include "c-lang.h" /* For c_val_print */
+#include "typeprint.h"
+#include "ch-lang.h"
+#include "annotate.h"
+
+static void
+chill_print_value_fields PARAMS ((struct type *, char *, GDB_FILE *, int, int,
+				  enum val_prettyprint, struct type **));
+
+static void
+chill_print_type_scalar PARAMS ((struct type *, LONGEST, GDB_FILE *));
+
+static void
+chill_val_print_array_elements PARAMS ((struct type *, char *, CORE_ADDR, GDB_FILE *,
+					int, int, int, enum val_prettyprint));
+
+
+/* Print integral scalar data VAL, of type TYPE, onto stdio stream STREAM.
+   Used to print data from type structures in a specified type.  For example,
+   array bounds may be characters or booleans in some languages, and this
+   allows the ranges to be printed in their "natural" form rather than as
+   decimal integer values. */
+
+static void
+chill_print_type_scalar (type, val, stream)
+     struct type *type;
+     LONGEST val;
+     GDB_FILE *stream;
+{
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_RANGE:
+      if (TYPE_TARGET_TYPE (type))
+	{
+	  chill_print_type_scalar (TYPE_TARGET_TYPE (type), val, stream);
+	  return;
+	}
+      break;
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_FUNC:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_REF:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_COMPLEX:
+    case TYPE_CODE_TYPEDEF:
+    default:
+      break;
+    }
+  print_type_scalar (type, val, stream);
+}
+
+/* Print the elements of an array.
+   Similar to val_print_array_elements, but prints
+   element indexes (in Chill syntax). */
+
+static void
+chill_val_print_array_elements (type, valaddr, address, stream,
+				format, deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  unsigned int i = 0;
+  unsigned int things_printed = 0;
+  unsigned len;
+  struct type *elttype;
+  struct type *range_type = TYPE_FIELD_TYPE (type, 0);
+  struct type *index_type = TYPE_TARGET_TYPE (range_type);
+  unsigned eltlen;
+  /* Position of the array element we are examining to see
+     whether it is repeated.  */
+  unsigned int rep1;
+  /* Number of repetitions we have detected so far.  */
+  unsigned int reps;
+  LONGEST low_bound =  TYPE_FIELD_BITPOS (range_type, 0);
+      
+  elttype = check_typedef (TYPE_TARGET_TYPE (type));
+  eltlen = TYPE_LENGTH (elttype);
+  len = TYPE_LENGTH (type) / eltlen;
+
+  annotate_array_section_begin (i, elttype);
+
+  for (; i < len && things_printed < print_max; i++)
+    {
+      if (i != 0)
+	{
+	  if (prettyprint_arrays)
+	    {
+	      fprintf_filtered (stream, ",\n");
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  else
+	    {
+	      fprintf_filtered (stream, ", ");
+	    }
+	}
+      wrap_here (n_spaces (2 + 2 * recurse));
+
+      rep1 = i + 1;
+      reps = 1;
+      while ((rep1 < len) && 
+	     !memcmp (valaddr + i * eltlen, valaddr + rep1 * eltlen, eltlen))
+	{
+	  ++reps;
+	  ++rep1;
+	}
+
+      fputs_filtered ("(", stream);
+      chill_print_type_scalar (index_type, low_bound + i, stream);
+      if (reps > 1)
+	{
+	  fputs_filtered (":", stream);
+	  chill_print_type_scalar (index_type, low_bound + i + reps - 1,
+				   stream);
+	  fputs_filtered ("): ", stream);
+	  val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
+		     deref_ref, recurse + 1, pretty);
+
+	  i = rep1 - 1;
+	  things_printed += 1;
+	}
+      else
+	{
+	  fputs_filtered ("): ", stream);
+	  val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
+		     deref_ref, recurse + 1, pretty);
+	  annotate_elt ();
+	  things_printed++;
+	}
+    }
+  annotate_array_section_end ();
+  if (i < len)
+    {
+      fprintf_filtered (stream, "...");
+    }
+}
+
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+   the inferior at address ADDRESS, onto stdio stream STREAM according to
+   FORMAT (a letter or 0 for natural format).  The data at VALADDR is in
+   target byte order.
+
+   If the data are a string pointer, returns the number of string characters
+   printed.
+
+   If DEREF_REF is nonzero, then dereference references, otherwise just print
+   them like pointers.
+
+   The PRETTY parameter controls prettyprinting.  */
+
+int
+chill_val_print (type, valaddr, embedded_offset, address,
+                 stream, format, deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  LONGEST val;
+  unsigned int i = 0;		/* Number of characters printed.  */
+  struct type *elttype;
+  CORE_ADDR addr;
+
+  CHECK_TYPEDEF (type);
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_ARRAY:
+      if (TYPE_LENGTH (type) > 0 && TYPE_LENGTH (TYPE_TARGET_TYPE (type)) > 0)
+	{
+	  if (prettyprint_arrays)
+	    {
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  fprintf_filtered (stream, "[");
+	  chill_val_print_array_elements (type, valaddr, address, stream,
+					  format, deref_ref, recurse, pretty);
+	  fprintf_filtered (stream, "]");
+	}
+      else
+	{
+	  error ("unimplemented in chill_val_print; unspecified array length");
+	}
+      break;
+
+    case TYPE_CODE_INT:
+      format = format ? format : output_format;
+      if (format)
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	}
+      else
+	{
+	  val_print_type_code_int (type, valaddr, stream);
+	}
+      break;
+
+    case TYPE_CODE_CHAR:
+      format = format ? format : output_format;
+      if (format)
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	}
+      else
+	{
+	  LA_PRINT_CHAR ((unsigned char) unpack_long (type, valaddr),
+			 stream);
+	}
+      break;
+
+    case TYPE_CODE_FLT:
+      if (format)
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	}
+      else
+	{
+	  print_floating (valaddr, type, stream);
+	}
+      break;
+
+    case TYPE_CODE_BOOL:
+      format = format ? format : output_format;
+      if (format)
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	}
+      else
+	{
+	  /* FIXME: Why is this using builtin_type_chill_bool not type?  */
+	  val = unpack_long (builtin_type_chill_bool, valaddr);
+	  fprintf_filtered (stream, val ? "TRUE" : "FALSE");
+	}
+      break;
+
+    case TYPE_CODE_UNDEF:
+      /* This happens (without TYPE_FLAG_STUB set) on systems which don't use
+	 dbx xrefs (NO_DBX_XREFS in gcc) if a file has a "struct foo *bar"
+	 and no complete type for struct foo in that file.  */
+      fprintf_filtered (stream, "<incomplete type>");
+      break;
+
+    case TYPE_CODE_PTR:
+      if (format && format != 's')
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	  break;
+	}
+      addr = unpack_pointer (type, valaddr);
+      elttype = check_typedef (TYPE_TARGET_TYPE (type));
+
+      /* We assume a NULL pointer is all zeros ... */
+      if (addr == 0)
+	{
+	  fputs_filtered ("NULL", stream);
+	  return 0;
+	}
+      
+      if (TYPE_CODE (elttype) == TYPE_CODE_FUNC)
+	{
+	  /* Try to print what function it points to.  */
+	  print_address_demangle (addr, stream, demangle);
+	  /* Return value is irrelevant except for string pointers.  */
+	  return (0);
+	}
+      if (addressprint && format != 's')
+	{
+	  print_address_numeric (addr, 1, stream);
+	}
+      
+      /* For a pointer to char or unsigned char, also print the string
+	 pointed to, unless pointer is null.  */
+      if (TYPE_LENGTH (elttype) == 1
+	  && TYPE_CODE (elttype) == TYPE_CODE_CHAR
+	  && (format == 0 || format == 's')
+	  && addr != 0
+	  && /* If print_max is UINT_MAX, the alloca below will fail.
+		In that case don't try to print the string.  */
+	  print_max < UINT_MAX)
+	i = val_print_string (addr, -1, TYPE_LENGTH (elttype), stream);
+
+      /* Return number of characters printed, plus one for the
+	 terminating null if we have "reached the end".  */
+      return (i + (print_max && i != print_max));
+      break;
+
+    case TYPE_CODE_STRING:
+      i = TYPE_LENGTH (type);
+      LA_PRINT_STRING (stream, valaddr, i, 1, 0);
+      /* Return number of characters printed, plus one for the terminating
+	 null if we have "reached the end".  */
+      return (i + (print_max && i != print_max));
+      break;
+
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_SET:
+      elttype = TYPE_INDEX_TYPE (type);
+      CHECK_TYPEDEF (elttype);
+      if (TYPE_FLAGS (elttype) & TYPE_FLAG_STUB)
+	{
+	  fprintf_filtered (stream, "<incomplete type>");
+	  gdb_flush (stream);
+	  break;
+	}
+      {
+	struct type *range = elttype;
+	LONGEST low_bound, high_bound;
+	int i;
+	int is_bitstring = TYPE_CODE (type) == TYPE_CODE_BITSTRING;
+	int need_comma = 0;
+
+	if (is_bitstring)
+	  fputs_filtered ("B'", stream);
+	else
+	  fputs_filtered ("[", stream);
+
+	i = get_discrete_bounds (range, &low_bound, &high_bound);
+      maybe_bad_bstring:
+	if (i < 0)
+	  {
+	    fputs_filtered ("<error value>", stream);
+	    goto done;
+	  }
+
+	for (i = low_bound; i <= high_bound; i++)
+	  {
+	    int element = value_bit_index (type, valaddr, i);
+	    if (element < 0)
+	      {
+		i = element;
+		goto maybe_bad_bstring;
+	      }
+	    if (is_bitstring)
+	      fprintf_filtered (stream, "%d", element);
+	    else if (element)
+	      {
+		if (need_comma)
+		  fputs_filtered (", ", stream);
+		chill_print_type_scalar (range, (LONGEST) i, stream);
+		need_comma = 1;
+
+		/* Look for a continuous range of true elements. */
+		if (i+1 <= high_bound && value_bit_index (type, valaddr, ++i))
+		  {
+		    int j = i; /* j is the upper bound so far of the range */
+		    fputs_filtered (":", stream);
+		    while (i+1 <= high_bound
+			   && value_bit_index (type, valaddr, ++i))
+		      j = i;
+		    chill_print_type_scalar (range, (LONGEST) j, stream);
+		  }
+	      }
+	  }
+      done:
+	if (is_bitstring)
+	  fputs_filtered ("'", stream);
+	else
+	  fputs_filtered ("]", stream);
+      }
+      break;
+
+    case TYPE_CODE_STRUCT:
+      if (chill_varying_type (type))
+	{
+	  struct type *inner = check_typedef (TYPE_FIELD_TYPE (type, 1));
+	  long length = unpack_long (TYPE_FIELD_TYPE (type, 0), valaddr);
+	  char *data_addr = valaddr + TYPE_FIELD_BITPOS (type, 1) / 8;
+	  
+	  switch (TYPE_CODE (inner))
+	    {
+	    case TYPE_CODE_STRING:
+	      if (length > TYPE_LENGTH (type) - 2)
+		{
+		  fprintf_filtered (stream,
+				    "<dynamic length %ld > static length %d> *invalid*",
+				    length, TYPE_LENGTH (type));
+
+		  /* Don't print the string; doing so might produce a
+		     segfault.  */
+		  return length;
+		}
+	      LA_PRINT_STRING (stream, data_addr, length, 1, 0);
+	      return length;
+	    default:
+	      break;
+	    }
+	}
+      chill_print_value_fields (type, valaddr, stream, format, recurse, pretty,
+				0);
+      break;
+
+    case TYPE_CODE_REF:
+      if (addressprint)
+        {
+	  fprintf_filtered (stream, "LOC(");
+	  print_address_numeric
+	    (extract_address (valaddr, TARGET_PTR_BIT / HOST_CHAR_BIT),
+	     1,
+	     stream);
+	  fprintf_filtered (stream, ")");
+	  if (deref_ref)
+	    fputs_filtered (": ", stream);
+        }
+      /* De-reference the reference.  */
+      if (deref_ref)
+	{
+	  if (TYPE_CODE (TYPE_TARGET_TYPE (type)) != TYPE_CODE_UNDEF)
+	    {
+	      value_ptr deref_val =
+		value_at
+		  (TYPE_TARGET_TYPE (type),
+		   unpack_pointer (lookup_pointer_type (builtin_type_void),
+				   valaddr),
+		   NULL);
+	      val_print (VALUE_TYPE (deref_val),
+			 VALUE_CONTENTS (deref_val),
+                         0,
+			 VALUE_ADDRESS (deref_val), stream, format,
+			 deref_ref, recurse + 1, pretty);
+	    }
+	  else
+	    fputs_filtered ("???", stream);
+	}
+      break;
+
+    case TYPE_CODE_ENUM:
+      c_val_print (type, valaddr, 0, address, stream, format,
+		   deref_ref, recurse, pretty);
+      break;
+
+    case TYPE_CODE_RANGE:
+      if (TYPE_TARGET_TYPE (type))
+	chill_val_print (TYPE_TARGET_TYPE (type), valaddr, 0, address, stream,
+			 format, deref_ref, recurse, pretty);
+      break;
+
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_FUNC:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_ERROR:
+    default:
+      /* Let's defer printing to the C printer, rather than
+	 print an error message.  FIXME! */
+      c_val_print (type, valaddr, 0, address, stream, format,
+		   deref_ref, recurse, pretty);
+    }
+  gdb_flush (stream);
+  return (0);
+}
+
+/* Mutually recursive subroutines of cplus_print_value and c_val_print to
+   print out a structure's fields: cp_print_value_fields and cplus_print_value.
+
+   TYPE, VALADDR, STREAM, RECURSE, and PRETTY have the
+   same meanings as in cplus_print_value and c_val_print.
+
+   DONT_PRINT is an array of baseclass types that we
+   should not print, or zero if called from top level.  */
+
+static void
+chill_print_value_fields (type, valaddr, stream, format, recurse, pretty,
+			  dont_print)
+     struct type *type;
+     char *valaddr;
+     GDB_FILE *stream;
+     int format;
+     int recurse;
+     enum val_prettyprint pretty;
+     struct type **dont_print;
+{
+  int i, len;
+  int fields_seen = 0;
+
+  CHECK_TYPEDEF (type);
+
+  fprintf_filtered (stream, "[");
+  len = TYPE_NFIELDS (type);
+  if (len == 0)
+    {
+      fprintf_filtered (stream, "<No data fields>");
+    }
+  else
+    {
+      for (i = 0; i < len; i++)
+	{
+	  if (fields_seen)
+	    {
+	      fprintf_filtered (stream, ", ");
+	    }
+	  fields_seen = 1;
+	  if (pretty)
+	    {
+	      fprintf_filtered (stream, "\n");
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  else 
+	    {
+	      wrap_here (n_spaces (2 + 2 * recurse));
+	    }
+	  fputs_filtered (".", stream);
+	  fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				   language_chill, DMGL_NO_OPTS);
+	  fputs_filtered (": ", stream);
+	  if (TYPE_FIELD_PACKED (type, i))
+	    {
+	      value_ptr v;
+
+	      /* Bitfields require special handling, especially due to byte
+		 order problems.  */
+	      v = value_from_longest (TYPE_FIELD_TYPE (type, i),
+				      unpack_field_as_long (type, valaddr, i));
+
+	      chill_val_print (TYPE_FIELD_TYPE (type, i), VALUE_CONTENTS (v), 0, 0,
+			       stream, format, 0, recurse + 1, pretty);
+	    }
+	  else
+	    {
+	      chill_val_print (TYPE_FIELD_TYPE (type, i), 
+			       valaddr + TYPE_FIELD_BITPOS (type, i) / 8, 0,
+			       0, stream, format, 0, recurse + 1, pretty);
+	    }
+	}
+      if (pretty)
+	{
+	  fprintf_filtered (stream, "\n");
+	  print_spaces_filtered (2 * recurse, stream);
+	}
+    }
+  fprintf_filtered (stream, "]");
+}
+
+int
+chill_value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  struct type *type = VALUE_TYPE (val);
+  struct type *real_type = check_typedef  (type);
+
+  /* If it is a pointer, indicate what it points to.
+
+     Print type also if it is a reference. */
+
+  if (TYPE_CODE (real_type) == TYPE_CODE_PTR ||
+      TYPE_CODE (real_type) == TYPE_CODE_REF)
+    {
+      char *valaddr = VALUE_CONTENTS (val);
+      CORE_ADDR addr = unpack_pointer (type, valaddr);
+      if (TYPE_CODE (type) != TYPE_CODE_PTR || addr != 0)
+	{
+	  int i;
+	  char *name = TYPE_NAME (type);
+	  if (name)
+	    fputs_filtered (name, stream);
+	  else if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_VOID)
+	    fputs_filtered ("PTR", stream);
+	  else
+	    {
+	      fprintf_filtered (stream, "(");
+	      type_print (type, "", stream, -1);
+	      fprintf_filtered (stream, ")");
+	    }
+	  fprintf_filtered (stream, "(");
+	  i = val_print (type, valaddr, 0, VALUE_ADDRESS (val),
+			 stream, format, 1, 0, pretty);
+	  fprintf_filtered (stream, ")");
+	  return i;
+	}
+    }
+  return (val_print (type, VALUE_CONTENTS (val), 0,
+		     VALUE_ADDRESS (val), stream, format, 1, 0, pretty));
+}
+
+
diff --git a/gdb/coff-solib.c b/gdb/coff-solib.c
new file mode 100644
index 0000000..6be6869
--- /dev/null
+++ b/gdb/coff-solib.c
@@ -0,0 +1,134 @@
+/* Handle COFF SVR3 shared libraries for GDB, the GNU Debugger.
+   Copyright 1993 Free Software Foundation, Inc.
+   
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+
+#include "frame.h"
+#include "bfd.h"
+#include "gdbcore.h"
+#include "symtab.h"
+
+/*
+
+GLOBAL FUNCTION
+
+	coff_solib_add -- add a shared library files to the symtab list.  We
+	examine the `.lib' section of the exec file and determine the names of
+	the shared libraries.
+
+	This function is responsible for discovering those names and
+	addresses, and saving sufficient information about them to allow
+	their symbols to be read at a later time.
+
+SYNOPSIS
+
+	void coff_solib_add (char *arg_string, int from_tty,
+			     struct target_ops *target)
+
+DESCRIPTION
+
+*/
+
+void
+coff_solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{	
+  asection *libsect;
+
+  libsect = bfd_get_section_by_name (exec_bfd, ".lib");
+
+  if (libsect)
+    {
+      int libsize;
+      unsigned char *lib;
+      struct libent
+	{
+	  bfd_byte len[4];
+	  bfd_byte nameoffset[4];
+	};
+
+      libsize = bfd_section_size (exec_bfd, libsect);
+
+      lib = (unsigned char *) alloca (libsize);
+
+      bfd_get_section_contents (exec_bfd, libsect, lib, 0, libsize);
+
+      while (libsize > 0)
+	{
+	  struct libent *ent;
+	  struct objfile *objfile;
+	  int len, nameoffset;
+	  char *filename;
+
+	  ent = (struct libent *)lib;
+
+	  len = bfd_get_32 (exec_bfd, ent->len);
+
+	  nameoffset = bfd_get_32 (exec_bfd, ent->nameoffset);
+
+	  if (len <= 0)
+	    break;
+
+	  filename = (char *)ent + nameoffset * 4;
+
+	  objfile = symbol_file_add (filename, from_tty,
+				     0, /* addr */
+				     0, /* not mainline */
+				     0, /* not mapped */
+				     0, /* Not readnow */
+                                     0, /* Not user loaded */
+                                     1); /* Is a solib */
+
+	  libsize -= len * 4;
+	  lib += len * 4;
+	}
+
+      /* Getting new symbols may change our opinion about what is
+	 frameless.  */
+      reinit_frame_cache ();
+    }
+}
+
+/*
+  
+GLOBAL FUNCTION
+  
+	coff_solib_create_inferior_hook -- shared library startup support
+  
+SYNOPSIS
+  
+	void coff_solib_create_inferior_hook()
+  
+DESCRIPTION
+  
+	When gdb starts up the inferior, the kernel maps in the shared
+	libraries.  We get here with the target stopped at it's first
+	instruction, and the libraries already mapped.  At this	point, this
+	function gets called via expansion of the macro
+	SOLIB_CREATE_INFERIOR_HOOK.
+  */
+
+void 
+coff_solib_create_inferior_hook()
+{
+  coff_solib_add ((char *) 0, 0, (struct target_ops *) 0);
+}
diff --git a/gdb/coff-solib.h b/gdb/coff-solib.h
new file mode 100644
index 0000000..43375cc
--- /dev/null
+++ b/gdb/coff-solib.h
@@ -0,0 +1,190 @@
+/* COFF (SVR3) Shared library declarations for GDB, the GNU Debugger.
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct target_ops;
+#endif
+
+/* Called when we free all symtabs, to free the shared library information
+   as well. */
+
+#if 0
+#define CLEAR_SOLIB			coff_clear_solib
+
+extern void
+coff_clear_solib PARAMS ((void));
+#endif
+
+/* Called to add symbols from a shared library to gdb's symbol table. */
+
+#define SOLIB_ADD(filename, from_tty, targ) \
+    coff_solib_add (filename, from_tty, targ)
+
+extern void
+coff_solib_add PARAMS ((char *, int, struct target_ops *));
+
+/* Function to be called when the inferior starts up, to discover the names
+   of shared libraries that are dynamically linked, the base addresses to
+   which they are linked, and sufficient information to read in their symbols
+   at a later time. */
+
+#define SOLIB_CREATE_INFERIOR_HOOK(PID)	coff_solib_create_inferior_hook()
+
+extern void
+coff_solib_create_inferior_hook PARAMS((void));	/* solib.c */
+
+/* Function to be called to remove the connection between debugger and
+   dynamic linker that was established by SOLIB_CREATE_INFERIOR_HOOK.
+   (This operation does not remove shared library information from
+   the debugger, as CLEAR_SOLIB does.)
+
+   This functionality is presently not implemented for this target.
+   */
+#define SOLIB_REMOVE_INFERIOR_HOOK(PID) (0)
+
+/* This function is called by the "catch load" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is loaded.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+
+/* This function is called by the "catch unload" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is unloaded.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+
+/* This function returns TRUE if the dynamic linker has just reported
+   a load of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+/*
+#define SOLIB_HAVE_LOAD_EVENT(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_HAVE_LOAD_EVENT(pid) \
+(0)
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been loaded.
+
+   This function must be used only when SOLIB_HAVE_LOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+
+   Presently, this functionality is not implemented.
+   */
+
+/*
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) \
+(0)
+
+/* This function returns TRUE if the dynamic linker has just reported
+   an unload of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+/*
+#define SOLIB_HAVE_UNLOAD_EVENT(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_HAVE_UNLOAD_EVENT(pid) \
+(0)
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been unloaded.
+
+   This function must be used only when SOLIB_HAVE_UNLOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+
+   Presently, this functionality is not implemented.
+   */
+/*
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) \
+(0)
+
+/* This function returns TRUE if pc is the address of an instruction that
+   lies within the dynamic linker (such as the event hook, or the dld
+   itself).
+
+   This function must be used only when a dynamic linker event has been
+   caught, and the inferior is being stepped out of the hook, or undefined
+   results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+
+/*
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) \
+(0)
+
+/* This function must be called when the inferior is killed, and the program
+   restarted.  This is not the same as CLEAR_SOLIB, in that it doesn't discard
+   any symbol tables.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_RESTART() \
+  (0)
+
+/* If we can't set a breakpoint, and it's in a shared library, just
+   disable it.  */
+
+#if 0
+#define DISABLE_UNSETTABLE_BREAK(addr)	coff_solib_address(addr)
+
+extern int
+solib_address PARAMS ((CORE_ADDR));		/* solib.c */
+#endif
diff --git a/gdb/coffread.c b/gdb/coffread.c
new file mode 100644
index 0000000..340e77f
--- /dev/null
+++ b/gdb/coffread.c
@@ -0,0 +1,2255 @@
+/* Read coff symbol tables and convert to internal format, for GDB.
+   Copyright 1987, 88, 89, 90, 91, 92, 93, 94, 96, 97, 1998
+             Free Software Foundation, Inc.
+   Contributed by David D. Johnson, Brown University (ddj@cs.brown.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "demangle.h"
+#include "breakpoint.h"
+
+#include "bfd.h"
+#include "obstack.h"
+
+#include "gdb_string.h"
+#include <ctype.h>
+
+#include "coff/internal.h"	/* Internal format of COFF symbols in BFD */
+#include "libcoff.h"		/* FIXME secret internal data from BFD */
+
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "gdb-stabs.h"
+#include "stabsread.h"
+#include "complaints.h"
+#include "target.h"
+
+struct coff_symfile_info {
+  file_ptr min_lineno_offset;		/* Where in file lowest line#s are */
+  file_ptr max_lineno_offset;		/* 1+last byte of line#s in file */
+
+  CORE_ADDR textaddr;			/* Addr of .text section. */
+  unsigned int textsize;		/* Size of .text section. */
+  struct stab_section_list *stabsects;	/* .stab sections.  */
+  asection *stabstrsect;		/* Section pointer for .stab section */
+  char *stabstrdata;
+};
+
+/* Translate an external name string into a user-visible name.  */
+#define	EXTERNAL_NAME(string, abfd) \
+	(string[0] == bfd_get_symbol_leading_char(abfd)? string+1: string)
+
+/* To be an sdb debug type, type must have at least a basic or primary
+   derived type.  Using this rather than checking against T_NULL is
+   said to prevent core dumps if we try to operate on Michael Bloom
+   dbx-in-coff file.  */
+
+#define SDB_TYPE(type) (BTYPE(type) | (type & N_TMASK))
+
+/* Convert from an sdb register number to an internal gdb register number.
+   This should be defined in tm.h, if REGISTER_NAMES is not set up
+   to map one to one onto the sdb register numbers.  */
+
+#ifndef SDB_REG_TO_REGNUM
+# define SDB_REG_TO_REGNUM(value)     (value)
+#endif
+
+/* Core address of start and end of text of current source file.
+   This comes from a ".text" symbol where x_nlinno > 0.  */
+
+static CORE_ADDR current_source_start_addr;
+static CORE_ADDR current_source_end_addr;
+
+/* The addresses of the symbol table stream and number of symbols
+   of the object file we are reading (as copied into core).  */
+
+static bfd *nlist_bfd_global;
+static int nlist_nsyms_global;
+
+/* Vector of line number information.  */
+
+static struct linetable *line_vector;
+
+/* Index of next entry to go in line_vector_index.  */
+
+static int line_vector_index;
+
+/* Last line number recorded in the line vector.  */
+
+static int prev_line_number;
+
+/* Number of elements allocated for line_vector currently.  */
+
+static int line_vector_length;
+
+/* Pointers to scratch storage, used for reading raw symbols and auxents.  */
+
+static char *temp_sym;
+static char *temp_aux;
+
+/* Local variables that hold the shift and mask values for the
+   COFF file that we are currently reading.  These come back to us
+   from BFD, and are referenced by their macro names, as well as
+   internally to the BTYPE, ISPTR, ISFCN, ISARY, ISTAG, and DECREF
+   macros from include/coff/internal.h .  */
+
+static unsigned	local_n_btmask;
+static unsigned	local_n_btshft;
+static unsigned	local_n_tmask;
+static unsigned	local_n_tshift;
+
+#define	N_BTMASK	local_n_btmask
+#define	N_BTSHFT	local_n_btshft
+#define	N_TMASK		local_n_tmask
+#define	N_TSHIFT	local_n_tshift
+ 
+/* Local variables that hold the sizes in the file of various COFF structures.
+   (We only need to know this to read them from the file -- BFD will then
+   translate the data in them, into `internal_xxx' structs in the right
+   byte order, alignment, etc.)  */
+
+static unsigned	local_linesz;
+static unsigned	local_symesz;
+static unsigned	local_auxesz;
+
+/* This is set if this is a PE format file.  */
+
+static int pe_file;
+
+/* Chain of typedefs of pointers to empty struct/union types.
+   They are chained thru the SYMBOL_VALUE_CHAIN.  */
+
+static struct symbol *opaque_type_chain[HASHSIZE];
+
+/* Complaints about various problems in the file being read  */
+
+struct complaint ef_complaint = 
+  {"Unmatched .ef symbol(s) ignored starting at symnum %d", 0, 0};
+
+struct complaint ef_stack_complaint = 
+  {"`.ef' symbol without matching `.bf' symbol ignored starting at symnum %d", 0, 0};
+
+struct complaint eb_stack_complaint = 
+  {"`.eb' symbol without matching `.bb' symbol ignored starting at symnum %d", 0, 0};
+
+struct complaint bf_no_aux_complaint =
+  {"`.bf' symbol %d has no aux entry", 0, 0};
+
+struct complaint ef_no_aux_complaint =
+  {"`.ef' symbol %d has no aux entry", 0, 0};
+
+struct complaint lineno_complaint =
+  {"Line number pointer %d lower than start of line numbers", 0, 0};
+
+struct complaint unexpected_type_complaint =
+  {"Unexpected type for symbol %s", 0, 0};
+
+struct complaint bad_sclass_complaint =
+  {"Bad n_sclass for symbol %s", 0, 0};
+
+struct complaint misordered_blocks_complaint =
+  {"Blocks out of order at address %x", 0, 0};
+
+struct complaint tagndx_bad_complaint =
+  {"Symbol table entry for %s has bad tagndx value", 0, 0};
+
+struct complaint eb_complaint = 
+  {"Mismatched .eb symbol ignored starting at symnum %d", 0, 0};
+
+/* Simplified internal version of coff symbol table information */
+
+struct coff_symbol {
+  char *c_name;
+  int c_symnum;		/* symbol number of this entry */
+  int c_naux;		/* 0 if syment only, 1 if syment + auxent, etc */
+  long c_value;
+  int c_sclass;
+  int c_secnum;
+  unsigned int c_type;
+};
+
+static struct type *coff_read_struct_type PARAMS ((int, int, int));
+
+static struct type *decode_base_type PARAMS ((struct coff_symbol *,
+					      unsigned int,
+					      union internal_auxent *));
+
+static struct type *decode_type PARAMS ((struct coff_symbol *, unsigned int,
+					 union internal_auxent *));
+
+static struct type *decode_function_type PARAMS ((struct coff_symbol *,
+						  unsigned int,
+						  union internal_auxent *));
+
+static struct type *coff_read_enum_type PARAMS ((int, int, int));
+
+static struct symbol *process_coff_symbol PARAMS ((struct coff_symbol *,
+						   union internal_auxent *,
+						   struct section_offsets *,
+						   struct objfile *));
+
+static void patch_opaque_types PARAMS ((struct symtab *));
+
+static void patch_type PARAMS ((struct type *, struct type *));
+
+static void enter_linenos PARAMS ((long, int, int, struct section_offsets *));
+
+static void free_linetab PARAMS ((void));
+
+static int init_lineno PARAMS ((bfd *, long, int));
+
+static char *getsymname PARAMS ((struct internal_syment *));
+
+static char *coff_getfilename PARAMS ((union internal_auxent *));
+
+static void free_stringtab PARAMS ((void));
+
+static int init_stringtab PARAMS ((bfd *, long));
+
+static void read_one_sym PARAMS ((struct coff_symbol *,
+				  struct internal_syment *,
+				  union internal_auxent *));
+
+static void coff_symtab_read PARAMS ((long, int, struct section_offsets *,
+				      struct objfile *));
+
+static void find_linenos PARAMS ((bfd *, sec_ptr, PTR));
+
+static void coff_symfile_init PARAMS ((struct objfile *));
+
+static void coff_new_init PARAMS ((struct objfile *));
+
+static void coff_symfile_read PARAMS ((struct objfile *,
+				       struct section_offsets *, int));
+
+static void coff_symfile_finish PARAMS ((struct objfile *));
+
+static void record_minimal_symbol PARAMS ((char *, CORE_ADDR,
+					   enum minimal_symbol_type,
+					   struct objfile *));
+
+static void coff_end_symtab PARAMS ((struct objfile *));
+
+static void complete_symtab PARAMS ((char *, CORE_ADDR, unsigned int));
+
+static void coff_start_symtab PARAMS ((char *));
+
+static void coff_record_line PARAMS ((int, CORE_ADDR));
+
+static struct type *coff_alloc_type PARAMS ((int));
+
+static struct type **coff_lookup_type PARAMS ((int));
+
+static void coff_locate_sections PARAMS ((bfd *, asection *, PTR));
+
+/* We are called once per section from coff_symfile_read.  We
+   need to examine each section we are passed, check to see
+   if it is something we are interested in processing, and
+   if so, stash away some access information for the section.
+
+   FIXME: The section names should not be hardwired strings (what
+   should they be?  I don't think most object file formats have enough
+   section flags to specify what kind of debug section it is
+   -kingdon).  */
+
+static void
+coff_locate_sections (abfd, sectp, csip)
+     bfd *abfd;
+     asection *sectp;
+     PTR csip;
+{
+  register struct coff_symfile_info *csi;
+  const char *name;
+
+  csi = (struct coff_symfile_info *) csip;
+  name = bfd_get_section_name (abfd, sectp);
+  if (STREQ (name, ".text"))
+    {
+      csi->textaddr = bfd_section_vma (abfd, sectp);
+      csi->textsize += bfd_section_size (abfd, sectp);
+    }
+  else if (strncmp (name, ".text", sizeof ".text" - 1) == 0)
+    {
+      csi->textsize += bfd_section_size (abfd, sectp);
+    }
+  else if (STREQ (name, ".stabstr"))
+    {
+      csi->stabstrsect = sectp;
+    }
+  else if (strncmp (name, ".stab", sizeof ".stab" - 1) == 0)
+    {
+      const char *s;
+
+      /* We can have multiple .stab sections if linked with
+         --split-by-reloc.  */
+      for (s = name + sizeof ".stab" - 1; *s != '\0'; s++)
+	if (! isdigit (*s))
+	  break;
+      if (*s == '\0')
+	{
+	  struct stab_section_list *n, **pn;
+
+	  n = ((struct stab_section_list *)
+	       xmalloc (sizeof (struct stab_section_list)));
+	  n->section = sectp;
+	  n->next = NULL;
+	  for (pn = &csi->stabsects; *pn != NULL; pn = &(*pn)->next)
+	    ;
+	  *pn = n;
+
+	  /* This will be run after coffstab_build_psymtabs is called
+             in coff_symfile_read, at which point we no longer need
+             the information.  */
+	  make_cleanup (free, n);
+	}
+    }
+}
+
+/* Return the section_offsets* that CS points to.  */
+static int cs_to_section PARAMS ((struct coff_symbol *, struct objfile *));
+
+struct find_targ_sec_arg {
+  int targ_index;
+  asection **resultp;
+};
+
+static void find_targ_sec PARAMS ((bfd *, asection *, void *));
+
+static void find_targ_sec (abfd, sect, obj)
+     bfd *abfd;
+     asection *sect;
+     PTR obj;
+{
+  struct find_targ_sec_arg *args = (struct find_targ_sec_arg *)obj;
+  if (sect->target_index == args->targ_index)
+    *args->resultp = sect;
+}
+
+/* Return the section number (SECT_OFF_*) that CS points to.  */
+static int
+cs_to_section (cs, objfile)
+     struct coff_symbol *cs;
+     struct objfile *objfile;
+{
+  asection *sect = NULL;
+  struct find_targ_sec_arg args;
+  int off = SECT_OFF_TEXT;
+
+  args.targ_index = cs->c_secnum;
+  args.resultp = &sect;
+  bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+  if (sect != NULL)
+    {
+      /* This is the section.  Figure out what SECT_OFF_* code it is.  */
+      if (bfd_get_section_flags (abfd, sect) & SEC_CODE)
+	off = SECT_OFF_TEXT;
+      else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
+	off = SECT_OFF_DATA;
+      else
+	off = SECT_OFF_BSS;
+    }
+  return off;
+}
+
+/* Return the address of the section of a COFF symbol.  */
+
+static CORE_ADDR cs_section_address PARAMS ((struct coff_symbol *, bfd *));
+
+static CORE_ADDR
+cs_section_address (cs, abfd)
+     struct coff_symbol *cs;
+     bfd *abfd;
+{
+  asection *sect = NULL;
+  struct find_targ_sec_arg args;
+  CORE_ADDR addr = 0;
+
+  args.targ_index = cs->c_secnum;
+  args.resultp = &sect;
+  bfd_map_over_sections (abfd, find_targ_sec, &args);
+  if (sect != NULL)
+    addr = bfd_get_section_vma (objfile->obfd, sect);
+  return addr;
+}
+
+/* Look up a coff type-number index.  Return the address of the slot
+   where the type for that index is stored.
+   The type-number is in INDEX. 
+
+   This can be used for finding the type associated with that index
+   or for associating a new type with the index.  */
+
+static struct type **
+coff_lookup_type (index)
+     register int index;
+{
+  if (index >= type_vector_length)
+    {
+      int old_vector_length = type_vector_length;
+
+      type_vector_length *= 2;
+      if (index /* is still */ >= type_vector_length)
+	type_vector_length = index * 2;
+
+      type_vector = (struct type **)
+	xrealloc ((char *) type_vector,
+		  type_vector_length * sizeof (struct type *));
+      memset (&type_vector[old_vector_length], 0,
+	     (type_vector_length - old_vector_length) * sizeof(struct type *));
+    }
+  return &type_vector[index];
+}
+
+/* Make sure there is a type allocated for type number index
+   and return the type object.
+   This can create an empty (zeroed) type object.  */
+
+static struct type *
+coff_alloc_type (index)
+     int index;
+{
+  register struct type **type_addr = coff_lookup_type (index);
+  register struct type *type = *type_addr;
+
+  /* If we are referring to a type not known at all yet,
+     allocate an empty type for it.
+     We will fill it in later if we find out how.  */
+  if (type == NULL)
+    {
+      type = alloc_type (current_objfile);
+      *type_addr = type;
+    }
+  return type;
+}
+
+/* Record a line number entry for line LINE at address PC.
+   FIXME:  Use record_line instead.  */
+
+static void
+coff_record_line (line, pc)
+     int line;
+     CORE_ADDR pc;
+{
+  struct linetable_entry *e;
+  /* Make sure line vector is big enough.  */
+
+  if (line_vector_index + 2 >= line_vector_length)
+    {
+      line_vector_length *= 2;
+      line_vector = (struct linetable *)
+	xrealloc ((char *) line_vector, sizeof (struct linetable)
+		  + (line_vector_length
+		     * sizeof (struct linetable_entry)));
+    }
+
+  e = line_vector->item + line_vector_index++;
+  e->line = line; e->pc = pc;
+}
+
+/* Start a new symtab for a new source file.
+   This is called when a COFF ".file" symbol is seen;
+   it indicates the start of data for one original source file.  */
+
+static void
+coff_start_symtab (name)
+    char *name;
+{
+  start_symtab (
+		/* We fill in the filename later.  start_symtab puts
+		   this pointer into last_source_file and we put it in
+		   subfiles->name, which end_symtab frees; that's why
+		   it must be malloc'd.  */
+		savestring (name, strlen(name)),
+		/* We never know the directory name for COFF.  */
+		NULL,
+		/* The start address is irrelevant, since we set
+		   last_source_start_addr in coff_end_symtab.  */
+		0);
+  record_debugformat ("COFF");
+
+  /* Initialize the source file line number information for this file.  */
+
+  if (line_vector)		/* Unlikely, but maybe possible? */
+    free ((PTR)line_vector);
+  line_vector_index = 0;
+  line_vector_length = 1000;
+  prev_line_number = -2;	/* Force first line number to be explicit */
+  line_vector = (struct linetable *)
+    xmalloc (sizeof (struct linetable)
+	     + line_vector_length * sizeof (struct linetable_entry));
+}
+
+/* Save the vital information from when starting to read a file,
+   for use when closing off the current file.
+   NAME is the file name the symbols came from, START_ADDR is the first
+   text address for the file, and SIZE is the number of bytes of text.  */
+
+static void
+complete_symtab (name, start_addr, size)
+    char *name;
+    CORE_ADDR start_addr;
+    unsigned int size;
+{
+  if (last_source_file != NULL)
+    free (last_source_file);
+  last_source_file = savestring (name, strlen (name));
+  current_source_start_addr = start_addr;
+  current_source_end_addr = start_addr + size;
+
+  if (current_objfile -> ei.entry_point >= current_source_start_addr &&
+      current_objfile -> ei.entry_point <  current_source_end_addr)
+    {
+      current_objfile -> ei.entry_file_lowpc = current_source_start_addr;
+      current_objfile -> ei.entry_file_highpc = current_source_end_addr;
+    }
+}
+
+/* Finish the symbol definitions for one main source file,
+   close off all the lexical contexts for that file
+   (creating struct block's for them), then make the
+   struct symtab for that file and put it in the list of all such. */
+
+static void
+coff_end_symtab (objfile)
+     struct objfile *objfile;
+{
+  struct symtab *symtab;
+
+  last_source_start_addr = current_source_start_addr;
+
+  /* For no good reason, this file stores the number of entries in a
+     separate variable instead of in line_vector->nitems.  Fix it.  */
+  if (line_vector)
+    line_vector->nitems = line_vector_index;
+
+  /* For COFF, we only have one subfile, so we can just look at
+     subfiles and not worry about there being other elements in the
+     chain.  We fill in various fields now because we didn't know them
+     before (or because doing it now is simply an artifact of how this
+     file used to be written).  */
+  subfiles->line_vector = line_vector;
+
+  symtab = end_symtab (current_source_end_addr, objfile, 0);
+
+  if (symtab != NULL)
+    free_named_symtabs (symtab->filename);
+
+  /* Reinitialize for beginning of new file. */
+  line_vector = 0;
+  line_vector_length = -1;
+  last_source_file = NULL;
+}
+
+static void
+record_minimal_symbol (name, address, type, objfile)
+     char *name;
+     CORE_ADDR address;
+     enum minimal_symbol_type type;
+     struct objfile *objfile;
+{
+  /* We don't want TDESC entry points in the minimal symbol table */
+  if (name[0] == '@') return;
+
+  prim_record_minimal_symbol (name, address, type, objfile);
+}
+
+/* coff_symfile_init ()
+   is the coff-specific initialization routine for reading symbols.
+   It is passed a struct objfile which contains, among other things,
+   the BFD for the file whose symbols are being read, and a slot for
+   a pointer to "private data" which we fill with cookies and other
+   treats for coff_symfile_read ().
+
+   We will only be called if this is a COFF or COFF-like file.
+   BFD handles figuring out the format of the file, and code in symtab.c
+   uses BFD's determination to vector to us.
+
+   The ultimate result is a new symtab (or, FIXME, eventually a psymtab).  */
+
+static void
+coff_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  /* Allocate struct to keep track of stab reading. */
+  objfile->sym_stab_info = (struct dbx_symfile_info *)
+    xmmalloc (objfile->md, sizeof (struct dbx_symfile_info));
+
+  memset ((PTR) objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_private = xmmalloc (objfile->md,
+				   sizeof (struct coff_symfile_info));
+
+  memset (objfile->sym_private, 0, sizeof (struct coff_symfile_info));
+
+  /* COFF objects may be reordered, so set OBJF_REORDERED.  If we
+     find this causes a significant slowdown in gdb then we could
+     set it in the debug symbol readers only when necessary.  */
+  objfile->flags |= OBJF_REORDERED;
+
+  init_entry_point_info (objfile);
+}
+
+/* This function is called for every section; it finds the outer limits
+   of the line table (minimum and maximum file offset) so that the
+   mainline code can read the whole thing for efficiency.  */
+
+/* ARGSUSED */
+static void
+find_linenos (abfd, asect, vpinfo)
+     bfd *abfd;
+     sec_ptr asect;
+     PTR vpinfo;
+{
+  struct coff_symfile_info *info;
+  int size, count;
+  file_ptr offset, maxoff;
+
+/* WARNING WILL ROBINSON!  ACCESSING BFD-PRIVATE DATA HERE!  FIXME!  */
+  count = asect->lineno_count;
+/* End of warning */
+
+  if (count == 0)
+    return;
+  size = count * local_linesz;
+
+  info = (struct coff_symfile_info *)vpinfo;
+/* WARNING WILL ROBINSON!  ACCESSING BFD-PRIVATE DATA HERE!  FIXME!  */
+  offset = asect->line_filepos;
+/* End of warning */
+
+  if (offset < info->min_lineno_offset || info->min_lineno_offset == 0)
+    info->min_lineno_offset = offset;
+
+  maxoff = offset + size;
+  if (maxoff > info->max_lineno_offset)
+    info->max_lineno_offset = maxoff;
+}
+
+
+/* The BFD for this file -- only good while we're actively reading
+   symbols into a psymtab or a symtab.  */
+
+static bfd *symfile_bfd;
+
+/* Read a symbol file, after initialization by coff_symfile_init.  */
+
+/* ARGSUSED */
+static void
+coff_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  struct coff_symfile_info *info;
+  struct dbx_symfile_info *dbxinfo;
+  bfd *abfd = objfile->obfd;
+  coff_data_type *cdata = coff_data (abfd);
+  char *name = bfd_get_filename (abfd);
+  register int val;
+  int num_symbols;
+  int symtab_offset;
+  int stringtab_offset;
+  struct cleanup *back_to;
+  int stabstrsize;
+
+  info = (struct coff_symfile_info *) objfile -> sym_private;
+  dbxinfo = objfile->sym_stab_info;
+  symfile_bfd = abfd;			/* Kludge for swap routines */
+
+/* WARNING WILL ROBINSON!  ACCESSING BFD-PRIVATE DATA HERE!  FIXME!  */
+   num_symbols = bfd_get_symcount (abfd);	/* How many syms */
+   symtab_offset = cdata->sym_filepos;		/* Symbol table file offset */
+   stringtab_offset = symtab_offset +		/* String table file offset */
+		      num_symbols * cdata->local_symesz;
+
+  /* Set a few file-statics that give us specific information about
+     the particular COFF file format we're reading.  */
+  local_linesz   = cdata->local_linesz;
+  local_n_btmask = cdata->local_n_btmask;
+  local_n_btshft = cdata->local_n_btshft;
+  local_n_tmask  = cdata->local_n_tmask;
+  local_n_tshift = cdata->local_n_tshift;
+  local_linesz   = cdata->local_linesz;
+  local_symesz   = cdata->local_symesz;
+  local_auxesz   = cdata->local_auxesz;
+
+  /* Allocate space for raw symbol and aux entries, based on their
+     space requirements as reported by BFD.  */
+  temp_sym = (char *) xmalloc
+	 (cdata->local_symesz + cdata->local_auxesz);
+  temp_aux = temp_sym + cdata->local_symesz;
+  back_to = make_cleanup ((make_cleanup_func) free_current_contents, &temp_sym);
+
+  /* We need to know whether this is a PE file, because in PE files,
+     unlike standard COFF files, symbol values are stored as offsets
+     from the section address, rather than as absolute addresses.
+     FIXME: We should use BFD to read the symbol table, and thus avoid
+     this problem.  */
+  pe_file = strncmp (bfd_get_target (objfile->obfd), "pe", 2) == 0;
+
+/* End of warning */
+
+  /* Read the line number table, all at once.  */
+  info->min_lineno_offset = 0;
+  info->max_lineno_offset = 0;
+  bfd_map_over_sections (abfd, find_linenos, (PTR) info);
+
+  make_cleanup ((make_cleanup_func) free_linetab, 0);
+  val = init_lineno (abfd, info->min_lineno_offset, 
+		     info->max_lineno_offset - info->min_lineno_offset);
+  if (val < 0)
+    error ("\"%s\": error reading line numbers\n", name);
+
+  /* Now read the string table, all at once.  */
+
+  make_cleanup ((make_cleanup_func) free_stringtab, 0);
+  val = init_stringtab (abfd, stringtab_offset);
+  if (val < 0)
+    error ("\"%s\": can't get string table", name);
+
+  init_minimal_symbol_collection ();
+  make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* Now that the executable file is positioned at symbol table,
+     process it and define symbols accordingly.  */
+
+  coff_symtab_read ((long) symtab_offset, num_symbols, section_offsets,
+		    objfile);
+
+  /* Sort symbols alphabetically within each block.  */
+
+  {
+    struct symtab *s;
+
+    for (s = objfile -> symtabs; s != NULL; s = s -> next)
+      sort_symtab_syms (s);
+  }
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile.  */
+
+  install_minimal_symbols (objfile);
+
+  bfd_map_over_sections (abfd, coff_locate_sections, (PTR) info);
+
+  if (info->stabsects)
+    {
+      /* FIXME: dubious.  Why can't we use something normal like
+	 bfd_get_section_contents?  */
+      bfd_seek (abfd, abfd->where, 0);
+
+      stabstrsize = bfd_section_size (abfd, info->stabstrsect);
+
+      coffstab_build_psymtabs (objfile,
+			       section_offsets,
+			       mainline,
+			       info->textaddr, info->textsize,
+			       info->stabsects,
+			       info->stabstrsect->filepos, stabstrsize);
+    }
+
+  do_cleanups (back_to);
+}
+
+static void
+coff_new_init (ignore)
+     struct objfile *ignore;
+{
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+coff_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile -> sym_private != NULL)
+    {
+      mfree (objfile -> md, objfile -> sym_private);
+    }
+}
+
+
+/* Given pointers to a symbol table in coff style exec file,
+   analyze them and create struct symtab's describing the symbols.
+   NSYMS is the number of symbols in the symbol table.
+   We read them one at a time using read_one_sym ().  */
+
+static void
+coff_symtab_read (symtab_offset, nsyms, section_offsets, objfile)
+     long symtab_offset;
+     int nsyms;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+  struct coff_symbol coff_symbol;
+  register struct coff_symbol *cs = &coff_symbol;
+  static struct internal_syment main_sym;
+  static union internal_auxent main_aux;
+  struct coff_symbol fcn_cs_saved;
+  static struct internal_syment fcn_sym_saved;
+  static union internal_auxent fcn_aux_saved;
+  struct symtab *s;
+  /* A .file is open.  */
+  int in_source_file = 0;
+  int next_file_symnum = -1;
+  /* Name of the current file.  */
+  char *filestring = "";
+  int depth = 0;
+  int fcn_first_line = 0;
+  int fcn_last_line = 0;
+  int fcn_start_addr = 0;
+  long fcn_line_ptr = 0;
+  int val;
+  CORE_ADDR tmpaddr;
+
+  /* Work around a stdio bug in SunOS4.1.1 (this makes me nervous....
+     it's hard to know I've really worked around it.  The fix should be
+     harmless, anyway).  The symptom of the bug is that the first
+     fread (in read_one_sym), will (in my example) actually get data
+     from file offset 268, when the fseek was to 264 (and ftell shows
+     264).  This causes all hell to break loose.  I was unable to
+     reproduce this on a short test program which operated on the same
+     file, performing (I think) the same sequence of operations.
+
+     It stopped happening when I put in this (former) rewind().
+
+     FIXME: Find out if this has been reported to Sun, whether it has
+     been fixed in a later release, etc.  */
+
+  bfd_seek (objfile->obfd, 0, 0);
+
+  /* Position to read the symbol table. */
+  val = bfd_seek (objfile->obfd, (long) symtab_offset, 0);
+  if (val < 0)
+    perror_with_name (objfile->name);
+
+  current_objfile = objfile;
+  nlist_bfd_global = objfile->obfd;
+  nlist_nsyms_global = nsyms;
+  last_source_file = NULL;
+  memset (opaque_type_chain, 0, sizeof opaque_type_chain);
+
+  if (type_vector)			/* Get rid of previous one */
+    free ((PTR) type_vector);
+  type_vector_length = 160;
+  type_vector = (struct type **)
+    xmalloc (type_vector_length * sizeof (struct type *));
+  memset (type_vector, 0, type_vector_length * sizeof (struct type *));
+
+  coff_start_symtab ("");
+
+  symnum = 0;
+  while (symnum < nsyms)
+    {
+      QUIT;			/* Make this command interruptable.  */
+
+      read_one_sym (cs, &main_sym, &main_aux);
+
+      if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE)
+	{
+	  if (last_source_file)
+	    coff_end_symtab (objfile);
+
+	  coff_start_symtab ("_globals_");
+	  complete_symtab ("_globals_", 0, 0);
+	  /* done with all files, everything from here on out is globals */
+	}
+
+      /* Special case for file with type declarations only, no text.  */
+      if (!last_source_file && SDB_TYPE (cs->c_type)
+	  && cs->c_secnum == N_DEBUG)
+	complete_symtab (filestring, 0, 0);
+
+      /* Typedefs should not be treated as symbol definitions.  */
+      if (ISFCN (cs->c_type) && cs->c_sclass != C_TPDEF)
+	{
+	  /* Record all functions -- external and static -- in minsyms. */
+	  tmpaddr = cs->c_value + ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	  record_minimal_symbol (cs->c_name, tmpaddr, mst_text, objfile);
+
+	  fcn_line_ptr = main_aux.x_sym.x_fcnary.x_fcn.x_lnnoptr;
+	  fcn_start_addr = tmpaddr;
+	  fcn_cs_saved = *cs;
+	  fcn_sym_saved = main_sym;
+	  fcn_aux_saved = main_aux;
+	  continue;
+	}
+
+      switch (cs->c_sclass)
+	{
+	  case C_EFCN:
+	  case C_EXTDEF:
+	  case C_ULABEL:
+	  case C_USTATIC:
+	  case C_LINE:
+	  case C_ALIAS:
+	  case C_HIDDEN:
+	    complain (&bad_sclass_complaint, cs->c_name);
+	    break;
+
+	  case C_FILE:
+	    /* c_value field contains symnum of next .file entry in table
+	       or symnum of first global after last .file.  */
+	    next_file_symnum = cs->c_value;
+	    if (cs->c_naux > 0)
+	      filestring = coff_getfilename (&main_aux);
+	    else
+	      filestring = "";
+
+	    /* Complete symbol table for last object file
+	       containing debugging information.  */
+	    if (last_source_file)
+	      {
+		coff_end_symtab (objfile);
+		coff_start_symtab (filestring);
+	      }
+	    in_source_file = 1;
+	    break;
+
+	  /* C_LABEL is used for labels and static functions.  Including
+	     it here allows gdb to see static functions when no debug
+	     info is available.  */
+	  case C_LABEL:
+	    /* However, labels within a function can make weird backtraces,
+	       so filter them out (from phdm@macqel.be). */
+	    if (within_function)
+	      break;
+          case C_STAT:
+	  case C_THUMBLABEL:
+	  case C_THUMBSTAT:
+	  case C_THUMBSTATFUNC:
+	    if (cs->c_name[0] == '.')
+	      {
+		if (STREQ (cs->c_name, ".text")) {
+		  /* FIXME:  don't wire in ".text" as section name
+		     or symbol name! */
+		  /* Check for in_source_file deals with case of
+		     a file with debugging symbols
+		     followed by a later file with no symbols.  */
+		  if (in_source_file)
+		    complete_symtab (filestring,
+				     cs->c_value + ANOFFSET (section_offsets, SECT_OFF_TEXT),
+				     main_aux.x_scn.x_scnlen);
+		  in_source_file = 0;
+		}
+		/* flush rest of '.' symbols */
+		break;
+	      }
+	    else if (!SDB_TYPE (cs->c_type)
+		     && cs->c_name[0] == 'L'
+		     && (strncmp (cs->c_name, "LI%", 3) == 0
+			 || strncmp (cs->c_name, "LF%", 3) == 0
+			 || strncmp (cs->c_name,"LC%",3) == 0
+			 || strncmp (cs->c_name,"LP%",3) == 0
+			 || strncmp (cs->c_name,"LPB%",4) == 0
+			 || strncmp (cs->c_name,"LBB%",4) == 0
+			 || strncmp (cs->c_name,"LBE%",4) == 0
+			 || strncmp (cs->c_name,"LPBX%",5) == 0))
+	      /* At least on a 3b1, gcc generates swbeg and string labels
+		 that look like this.  Ignore them.  */
+	      break;
+	    /* fall in for static symbols that don't start with '.' */
+	  case C_THUMBEXT:
+	  case C_THUMBEXTFUNC:
+	  case C_EXT:
+	    {
+	      /* Record it in the minimal symbols regardless of
+		 SDB_TYPE.  This parallels what we do for other debug
+		 formats, and probably is needed to make
+		 print_address_symbolic work right without the (now
+		 gone) "set fast-symbolic-addr off" kludge.  */
+
+	      /* FIXME: should use mst_abs, and not relocate, if absolute.  */
+	      enum minimal_symbol_type ms_type;
+	      int sec;
+
+	      if (cs->c_secnum == N_UNDEF)
+		{
+		  /* This is a common symbol.  See if the target
+		     environment knows where it has been relocated to.  */
+		  CORE_ADDR reladdr;
+		  if (target_lookup_symbol (cs->c_name, &reladdr))
+		    {
+		      /* Error in lookup; ignore symbol.  */
+		      break;
+		    }
+		  tmpaddr = reladdr;
+		  /* The address has already been relocated; make sure that
+		     objfile_relocate doesn't relocate it again.  */
+		  sec = -2;
+		  ms_type = cs->c_sclass == C_EXT
+			    || cs->c_sclass == C_THUMBEXT ?
+			       mst_bss : mst_file_bss;
+		}
+	      else
+		{
+		  sec = cs_to_section (cs, objfile);
+		  tmpaddr = cs->c_value;
+		  if (cs->c_sclass == C_EXT || cs->c_sclass == C_THUMBEXTFUNC
+		      || cs->c_sclass == C_THUMBEXT)
+		    tmpaddr += ANOFFSET (section_offsets, sec);
+
+		  switch (sec)
+		    {
+		    case SECT_OFF_TEXT:
+		    case SECT_OFF_RODATA:
+		      ms_type =
+			cs->c_sclass == C_EXT || cs->c_sclass == C_THUMBEXTFUNC
+					|| cs->c_sclass == C_THUMBEXT ?
+					  mst_text : mst_file_text;
+#ifdef SMASH_TEXT_ADDRESS
+		      if (tmpaddr & 1)	/* FIXME: delete this line */
+			SMASH_TEXT_ADDRESS (tmpaddr);
+#endif
+		      break;
+		    case SECT_OFF_DATA:
+		      ms_type =
+			cs->c_sclass == C_EXT || cs->c_sclass == C_THUMBEXT ?
+			  mst_data : mst_file_data;
+		      break;
+		    case SECT_OFF_BSS:
+		      ms_type =
+			cs->c_sclass == C_EXT || cs->c_sclass == C_THUMBEXT ?
+			  mst_data : mst_file_data;
+		      break;
+		    default:
+		      ms_type = mst_unknown;
+		      break;
+		    }
+		}
+
+	      if (cs->c_name[0] != '@' /* Skip tdesc symbols */)
+		{
+		  struct minimal_symbol *msym;
+
+		  msym = prim_record_minimal_symbol_and_info
+		  (cs->c_name, tmpaddr, ms_type, (char *)cs->c_sclass, sec,
+		   NULL, objfile);
+#ifdef COFF_MAKE_MSYMBOL_SPECIAL
+		  if(msym)
+		    COFF_MAKE_MSYMBOL_SPECIAL(cs->c_sclass, msym);		
+#endif
+		}
+	      if (SDB_TYPE (cs->c_type))
+		{
+		  struct symbol *sym;
+		  sym = process_coff_symbol
+		    (cs, &main_aux, section_offsets, objfile);
+		  SYMBOL_VALUE (sym) = tmpaddr;
+		  SYMBOL_SECTION (sym) = sec;
+		}
+	    }
+	    break;
+
+	  case C_FCN:
+	    if (STREQ (cs->c_name, ".bf"))
+	      {
+		within_function = 1;
+
+		/* value contains address of first non-init type code */
+		/* main_aux.x_sym.x_misc.x_lnsz.x_lnno
+			    contains line number of '{' } */
+		if (cs->c_naux != 1)
+		  complain (&bf_no_aux_complaint, cs->c_symnum);
+		fcn_first_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno;
+
+		/* Might want to check that locals are 0 and
+		   context_stack_depth is zero, and complain if not.  */
+
+		depth = 0;
+		new = push_context (depth, fcn_start_addr);
+		fcn_cs_saved.c_name = getsymname (&fcn_sym_saved);
+		new->name =
+		  process_coff_symbol (&fcn_cs_saved, &fcn_aux_saved,
+				       section_offsets, objfile);
+	      }
+	    else if (STREQ (cs->c_name, ".ef"))
+	      {
+		/* the value of .ef is the address of epilogue code;
+		   not useful for gdb.  */
+		/* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
+			    contains number of lines to '}' */
+
+		if (context_stack_depth <= 0)
+		  {		/* We attempted to pop an empty context stack */
+		    complain (&ef_stack_complaint, cs->c_symnum);
+		    within_function = 0;
+		    break;
+		  }
+
+		new = pop_context ();
+		/* Stack must be empty now.  */
+		if (context_stack_depth > 0 || new == NULL)
+		  {
+		    complain (&ef_complaint, cs->c_symnum);
+		    within_function = 0;
+		    break;
+		  }
+		if (cs->c_naux != 1)
+		  {
+		    complain (&ef_no_aux_complaint, cs->c_symnum);
+		    fcn_last_line = 0x7FFFFFFF;
+		  }
+		else
+		  {
+		    fcn_last_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno;
+		  }
+		enter_linenos (fcn_line_ptr, fcn_first_line, fcn_last_line,
+			       section_offsets);
+
+		finish_block (new->name, &local_symbols, new->old_blocks,
+			      new->start_addr,
+#if defined (FUNCTION_EPILOGUE_SIZE)
+			      /* This macro should be defined only on
+				 machines where the
+				 fcn_aux_saved.x_sym.x_misc.x_fsize
+				 field is always zero.
+				 So use the .bf record information that
+				 points to the epilogue and add the size
+				 of the epilogue.  */
+			      cs->c_value
+			      + FUNCTION_EPILOGUE_SIZE
+			      + ANOFFSET (section_offsets, SECT_OFF_TEXT),
+#else
+			      fcn_cs_saved.c_value
+			      + fcn_aux_saved.x_sym.x_misc.x_fsize
+			      + ANOFFSET (section_offsets, SECT_OFF_TEXT),
+#endif
+			      objfile
+			      );
+		within_function = 0;
+	      }
+	    break;
+
+	  case C_BLOCK:
+	    if (STREQ (cs->c_name, ".bb"))
+	      {
+		tmpaddr = cs->c_value;
+		tmpaddr += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		push_context (++depth, tmpaddr);
+	      }
+	    else if (STREQ (cs->c_name, ".eb"))
+	      {
+		if (context_stack_depth <= 0)
+		  {		/* We attempted to pop an empty context stack */
+		    complain (&eb_stack_complaint, cs->c_symnum);
+		    break;
+		  }
+
+		new = pop_context ();
+		if (depth-- != new->depth)
+		  {
+		    complain (&eb_complaint, symnum);
+		    break;
+		  }
+		if (local_symbols && context_stack_depth > 0)
+		  {
+		    tmpaddr =
+		      cs->c_value + ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		    /* Make a block for the local symbols within.  */
+		    finish_block (0, &local_symbols, new->old_blocks,
+				  new->start_addr, tmpaddr, objfile);
+		  }
+		/* Now pop locals of block just finished.  */
+		local_symbols = new->locals;
+	      }
+	    break;
+
+	  default:
+	    process_coff_symbol (cs, &main_aux, section_offsets, objfile);
+	    break;
+	}
+    }
+
+  if (last_source_file)
+    coff_end_symtab (objfile);
+
+  /* Patch up any opaque types (references to types that are not defined
+     in the file where they are referenced, e.g. "struct foo *bar").  */
+  ALL_OBJFILE_SYMTABS (objfile, s)
+    patch_opaque_types (s);
+
+  current_objfile = NULL;
+}
+
+/* Routines for reading headers and symbols from executable.  */
+
+/* Read the next symbol, swap it, and return it in both internal_syment
+   form, and coff_symbol form.  Also return its first auxent, if any,
+   in internal_auxent form, and skip any other auxents.  */
+
+static void
+read_one_sym (cs, sym, aux)
+    register struct coff_symbol *cs;
+    register struct internal_syment *sym;
+    register union internal_auxent *aux;
+{
+  int i;
+
+  cs->c_symnum = symnum;
+  bfd_read (temp_sym, local_symesz, 1, nlist_bfd_global);
+  bfd_coff_swap_sym_in (symfile_bfd, temp_sym, (char *)sym);
+  cs->c_naux = sym->n_numaux & 0xff;
+  if (cs->c_naux >= 1)
+    {
+    bfd_read (temp_aux, local_auxesz, 1, nlist_bfd_global);
+    bfd_coff_swap_aux_in (symfile_bfd, temp_aux, sym->n_type, sym->n_sclass,
+			  0, cs->c_naux, (char *)aux);
+    /* If more than one aux entry, read past it (only the first aux
+       is important). */
+    for (i = 1; i < cs->c_naux; i++)
+      bfd_read (temp_aux, local_auxesz, 1, nlist_bfd_global);
+    }
+  cs->c_name = getsymname (sym);
+  cs->c_value = sym->n_value;
+  cs->c_sclass = (sym->n_sclass & 0xff);
+  cs->c_secnum = sym->n_scnum;
+  cs->c_type = (unsigned) sym->n_type;
+  if (!SDB_TYPE (cs->c_type))
+    cs->c_type = 0;
+
+#if 0
+  if (cs->c_sclass & 128)
+    printf("thumb symbol %s, class 0x%x\n", cs->c_name, cs->c_sclass);
+#endif
+
+  symnum += 1 + cs->c_naux;
+
+  /* The PE file format stores symbol values as offsets within the
+     section, rather than as absolute addresses.  We correct that
+     here, if the symbol has an appropriate storage class.  FIXME: We
+     should use BFD to read the symbols, rather than duplicating the
+     work here.  */
+  if (pe_file)
+    {
+      switch (cs->c_sclass)
+	{
+	case C_EXT:
+	case C_THUMBEXT:
+	case C_THUMBEXTFUNC:
+	case C_SECTION:
+	case C_NT_WEAK:
+	case C_STAT:
+	case C_THUMBSTAT:
+	case C_THUMBSTATFUNC:
+	case C_LABEL:
+	case C_THUMBLABEL:
+	case C_BLOCK:
+	case C_FCN:
+	case C_EFCN:
+	  if (cs->c_secnum != 0)
+	    cs->c_value += cs_section_address (cs, symfile_bfd);
+	  break;
+	}
+    }
+}
+
+/* Support for string table handling */
+
+static char *stringtab = NULL;
+
+static int
+init_stringtab (abfd, offset)
+    bfd *abfd;
+    long offset;
+{
+  long length;
+  int val;
+  unsigned char lengthbuf[4];
+
+  free_stringtab ();
+
+  /* If the file is stripped, the offset might be zero, indicating no
+     string table.  Just return with `stringtab' set to null. */
+  if (offset == 0)
+    return 0;
+
+  if (bfd_seek (abfd, offset, 0) < 0)
+    return -1;
+
+  val = bfd_read ((char *)lengthbuf, sizeof lengthbuf, 1, abfd);
+  length = bfd_h_get_32 (symfile_bfd, lengthbuf);
+       
+  /* If no string table is needed, then the file may end immediately
+     after the symbols.  Just return with `stringtab' set to null. */
+  if (val != sizeof lengthbuf || length < sizeof lengthbuf)
+    return 0;
+
+  stringtab = (char *) xmalloc (length);
+  /* This is in target format (probably not very useful, and not currently
+     used), not host format.  */
+  memcpy (stringtab, lengthbuf, sizeof lengthbuf);
+  if (length == sizeof length)		/* Empty table -- just the count */
+    return 0;
+
+  val = bfd_read (stringtab + sizeof lengthbuf, length - sizeof lengthbuf, 1, abfd);
+  if (val != length - sizeof lengthbuf || stringtab[length - 1] != '\0')
+    return -1;
+
+  return 0;
+}
+
+static void
+free_stringtab ()
+{
+  if (stringtab)
+    free (stringtab);
+  stringtab = NULL;
+}
+
+static char *
+getsymname (symbol_entry)
+    struct internal_syment *symbol_entry;
+{
+  static char buffer[SYMNMLEN+1];
+  char *result;
+
+  if (symbol_entry->_n._n_n._n_zeroes == 0)
+    {
+      /* FIXME: Probably should be detecting corrupt symbol files by
+	 seeing whether offset points to within the stringtab.  */
+      result = stringtab + symbol_entry->_n._n_n._n_offset;
+    }
+  else
+    {
+      strncpy (buffer, symbol_entry->_n._n_name, SYMNMLEN);
+      buffer[SYMNMLEN] = '\0';
+      result = buffer;
+    }
+  return result;
+}
+
+/* Extract the file name from the aux entry of a C_FILE symbol.  Return
+   only the last component of the name.  Result is in static storage and
+   is only good for temporary use.  */
+
+static char *
+coff_getfilename (aux_entry)
+    union internal_auxent *aux_entry;
+{
+  static char buffer[BUFSIZ];
+  register char *temp;
+  char *result;
+
+  if (aux_entry->x_file.x_n.x_zeroes == 0)
+    strcpy (buffer, stringtab + aux_entry->x_file.x_n.x_offset);
+  else
+    {
+      strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN);
+      buffer[FILNMLEN] = '\0';
+    }
+  result = buffer;
+
+  /* FIXME: We should not be throwing away the information about what
+     directory.  It should go into dirname of the symtab, or some such
+     place.  */
+  if ((temp = strrchr (result, '/')) != NULL)
+    result = temp + 1;
+  return (result);
+}
+
+/* Support for line number handling.  */
+
+static char *linetab = NULL;
+static long linetab_offset;
+static unsigned long linetab_size;
+
+/* Read in all the line numbers for fast lookups later.  Leave them in
+   external (unswapped) format in memory; we'll swap them as we enter
+   them into GDB's data structures.  */
+ 
+static int
+init_lineno (abfd, offset, size)
+    bfd *abfd;
+    long offset;
+    int size;
+{
+  int val;
+
+  linetab_offset = offset;
+  linetab_size = size;
+
+  free_linetab();
+
+  if (size == 0)
+    return 0;
+
+  if (bfd_seek (abfd, offset, 0) < 0)
+    return -1;
+  
+  /* Allocate the desired table, plus a sentinel */
+  linetab = (char *) xmalloc (size + local_linesz);
+
+  val = bfd_read (linetab, size, 1, abfd);
+  if (val != size)
+    return -1;
+
+  /* Terminate it with an all-zero sentinel record */
+  memset (linetab + size, 0, local_linesz);
+
+  return 0;
+}
+
+static void
+free_linetab ()
+{
+  if (linetab)
+    free (linetab);
+  linetab = NULL;
+}
+
+#if !defined (L_LNNO32)
+#define L_LNNO32(lp) ((lp)->l_lnno)
+#endif
+
+static void
+enter_linenos (file_offset, first_line, last_line, section_offsets)
+     long file_offset;
+     register int first_line;
+     register int last_line;
+     struct section_offsets *section_offsets;
+{
+  register char *rawptr;
+  struct internal_lineno lptr;
+
+  if (!linetab)
+    return ;
+  if (file_offset < linetab_offset)
+    {
+      complain (&lineno_complaint, file_offset);
+      if (file_offset > linetab_size)	/* Too big to be an offset? */
+	return;
+      file_offset += linetab_offset;  /* Try reading at that linetab offset */
+    }
+  
+  rawptr = &linetab[file_offset - linetab_offset];
+
+  /* skip first line entry for each function */
+  rawptr += local_linesz;
+  /* line numbers start at one for the first line of the function */
+  first_line--;
+
+  for (;;) {
+    bfd_coff_swap_lineno_in (symfile_bfd, rawptr, &lptr);
+    rawptr += local_linesz;
+    /* The next function, or the sentinel, will have L_LNNO32 zero; we exit. */
+    if (L_LNNO32 (&lptr) && L_LNNO32 (&lptr) <= last_line)
+      coff_record_line (first_line + L_LNNO32 (&lptr),
+			lptr.l_addr.l_paddr
+			+ ANOFFSET (section_offsets, SECT_OFF_TEXT));
+    else
+      break;
+  } 
+}
+
+static void
+patch_type (type, real_type)
+    struct type *type;
+    struct type *real_type;
+{
+  register struct type *target = TYPE_TARGET_TYPE (type);
+  register struct type *real_target = TYPE_TARGET_TYPE (real_type);
+  int field_size = TYPE_NFIELDS (real_target) * sizeof (struct field);
+
+  TYPE_LENGTH (target) = TYPE_LENGTH (real_target);
+  TYPE_NFIELDS (target) = TYPE_NFIELDS (real_target);
+  TYPE_FIELDS (target) = (struct field *) TYPE_ALLOC (target, field_size);
+
+  memcpy (TYPE_FIELDS (target), TYPE_FIELDS (real_target), field_size);
+
+  if (TYPE_NAME (real_target))
+    {
+      if (TYPE_NAME (target))
+	free (TYPE_NAME (target));
+      TYPE_NAME (target) = concat (TYPE_NAME (real_target), NULL);
+    }
+}
+
+/* Patch up all appropriate typedef symbols in the opaque_type_chains
+   so that they can be used to print out opaque data structures properly.  */
+
+static void
+patch_opaque_types (s)
+     struct symtab *s;
+{
+  register struct block *b;
+  register int i;
+  register struct symbol *real_sym;
+  
+  /* Go through the per-file symbols only */
+  b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK);
+  for (i = BLOCK_NSYMS (b) - 1; i >= 0; i--)
+    {
+      /* Find completed typedefs to use to fix opaque ones.
+	 Remove syms from the chain when their types are stored,
+	 but search the whole chain, as there may be several syms
+	 from different files with the same name.  */
+      real_sym = BLOCK_SYM (b, i);
+      if (SYMBOL_CLASS (real_sym) == LOC_TYPEDEF &&
+	  SYMBOL_NAMESPACE (real_sym) == VAR_NAMESPACE &&
+	  TYPE_CODE (SYMBOL_TYPE (real_sym)) == TYPE_CODE_PTR &&
+	  TYPE_LENGTH (TYPE_TARGET_TYPE (SYMBOL_TYPE (real_sym))) != 0)
+	{
+	  register char *name = SYMBOL_NAME (real_sym);
+	  register int hash = hashname (name);
+	  register struct symbol *sym, *prev;
+	  
+	  prev = 0;
+	  for (sym = opaque_type_chain[hash]; sym;)
+	    {
+	      if (name[0] == SYMBOL_NAME (sym)[0] &&
+		  STREQ (name + 1, SYMBOL_NAME (sym) + 1))
+		{
+		  if (prev)
+		    {
+		      SYMBOL_VALUE_CHAIN (prev) = SYMBOL_VALUE_CHAIN (sym);
+		    }
+		  else
+		    {
+		      opaque_type_chain[hash] = SYMBOL_VALUE_CHAIN (sym);
+		    }
+		  
+		  patch_type (SYMBOL_TYPE (sym), SYMBOL_TYPE (real_sym));
+		  
+		  if (prev)
+		    {
+		      sym = SYMBOL_VALUE_CHAIN (prev);
+		    }
+		  else
+		    {
+		      sym = opaque_type_chain[hash];
+		    }
+		}
+	      else
+		{
+		  prev = sym;
+		  sym = SYMBOL_VALUE_CHAIN (sym);
+		}
+	    }
+	}
+    }
+}
+
+static struct symbol *
+process_coff_symbol (cs, aux, section_offsets, objfile)
+     register struct coff_symbol *cs;
+     register union internal_auxent *aux;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  register struct symbol *sym
+    = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+				       sizeof (struct symbol));
+  char *name;
+
+  memset (sym, 0, sizeof (struct symbol));
+  name = cs->c_name;
+  name = EXTERNAL_NAME (name, objfile->obfd);
+  SYMBOL_NAME (sym) = obsavestring (name, strlen (name),
+				    &objfile->symbol_obstack);
+  SYMBOL_LANGUAGE (sym) = language_auto;
+  SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+
+  /* default assumptions */
+  SYMBOL_VALUE (sym) = cs->c_value;
+  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+  SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
+
+  if (ISFCN (cs->c_type))
+    {
+      SYMBOL_VALUE (sym) += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+       SYMBOL_TYPE(sym) = 
+	 lookup_function_type (decode_function_type (cs, cs->c_type, aux));
+
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      if (cs->c_sclass == C_STAT || cs->c_sclass == C_THUMBSTAT
+	  || cs->c_sclass == C_THUMBSTATFUNC)
+	add_symbol_to_list (sym, &file_symbols);
+      else if (cs->c_sclass == C_EXT || cs->c_sclass == C_THUMBEXT
+	       || cs->c_sclass == C_THUMBEXTFUNC)
+	add_symbol_to_list (sym, &global_symbols);
+    }
+  else
+    {
+      SYMBOL_TYPE (sym) = decode_type (cs, cs->c_type, aux);
+      switch (cs->c_sclass)
+	{
+	  case C_NULL:
+	    break;
+
+	  case C_AUTO:
+	    SYMBOL_CLASS (sym) = LOC_LOCAL;
+	    add_symbol_to_list (sym, &local_symbols);
+	    break;
+
+	  case C_THUMBEXT:
+	  case C_THUMBEXTFUNC:
+	  case C_EXT:
+	    SYMBOL_CLASS (sym) = LOC_STATIC;
+	    SYMBOL_VALUE_ADDRESS (sym) = (CORE_ADDR) cs->c_value;
+	    SYMBOL_VALUE_ADDRESS (sym) += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	    add_symbol_to_list (sym, &global_symbols);
+	    break;
+
+	  case C_THUMBSTAT:
+	  case C_THUMBSTATFUNC:
+	  case C_STAT:
+	    SYMBOL_CLASS (sym) = LOC_STATIC;
+	    SYMBOL_VALUE_ADDRESS (sym) = (CORE_ADDR) cs->c_value;
+	    SYMBOL_VALUE_ADDRESS (sym) += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	    if (within_function) {
+	      /* Static symbol of local scope */
+	      add_symbol_to_list (sym, &local_symbols);
+	    }
+	    else {
+	      /* Static symbol at top level of file */
+	      add_symbol_to_list (sym, &file_symbols);
+	    }
+	    break;
+
+#ifdef C_GLBLREG		/* AMD coff */
+	  case C_GLBLREG:
+#endif
+	  case C_REG:
+	    SYMBOL_CLASS (sym) = LOC_REGISTER;
+	    SYMBOL_VALUE (sym) = SDB_REG_TO_REGNUM(cs->c_value);
+	    add_symbol_to_list (sym, &local_symbols);
+	    break;
+
+	  case C_THUMBLABEL:
+	  case C_LABEL:
+	    break;
+
+	  case C_ARG:
+	    SYMBOL_CLASS (sym) = LOC_ARG;
+	    add_symbol_to_list (sym, &local_symbols);
+#if !defined (BELIEVE_PCC_PROMOTION)
+	    if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	      {
+		/* If PCC says a parameter is a short or a char,
+		   aligned on an int boundary, realign it to the
+		   "little end" of the int.  */
+		struct type *temptype;
+		temptype = lookup_fundamental_type (current_objfile,
+						    FT_INTEGER);
+		if (TYPE_LENGTH (SYMBOL_TYPE (sym)) < TYPE_LENGTH (temptype)
+		    && TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_INT
+		    && 0 == SYMBOL_VALUE (sym) % TYPE_LENGTH (temptype))
+		  {
+		    SYMBOL_VALUE (sym) +=
+		      TYPE_LENGTH (temptype)
+			- TYPE_LENGTH (SYMBOL_TYPE (sym));
+		  }
+	      }
+#endif
+	    break;
+
+	  case C_REGPARM:
+	    SYMBOL_CLASS (sym) = LOC_REGPARM;
+	    SYMBOL_VALUE (sym) = SDB_REG_TO_REGNUM(cs->c_value);
+	    add_symbol_to_list (sym, &local_symbols);
+#if !defined (BELIEVE_PCC_PROMOTION)
+	    /* FIXME:  This should retain the current type, since it's just
+	       a register value.  gnu@adobe, 26Feb93 */
+	      {
+	        /* If PCC says a parameter is a short or a char,
+		   it is really an int.  */
+		struct type *temptype;
+		temptype =
+		  lookup_fundamental_type (current_objfile, FT_INTEGER);
+		if (TYPE_LENGTH (SYMBOL_TYPE (sym)) < TYPE_LENGTH (temptype)
+		    && TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_INT)
+		  {
+		    SYMBOL_TYPE (sym) =
+		      (TYPE_UNSIGNED (SYMBOL_TYPE (sym))
+		       ? lookup_fundamental_type (current_objfile,
+						  FT_UNSIGNED_INTEGER)
+		       : temptype);
+		  }
+	      }
+#endif
+	    break;
+	    
+	  case C_TPDEF:
+	    SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	    SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+
+	    /* If type has no name, give it one */
+	    if (TYPE_NAME (SYMBOL_TYPE (sym)) == 0)
+	      {
+		if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_PTR
+		    || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_FUNC)
+		  {
+		    /* If we are giving a name to a type such as "pointer to
+		       foo" or "function returning foo", we better not set
+		       the TYPE_NAME.  If the program contains "typedef char
+		       *caddr_t;", we don't want all variables of type char
+		       * to print as caddr_t.  This is not just a
+		       consequence of GDB's type management; CC and GCC (at
+		       least through version 2.4) both output variables of
+		       either type char * or caddr_t with the type
+		       refering to the C_TPDEF symbol for caddr_t.  If a future
+		       compiler cleans this up it GDB is not ready for it
+		       yet, but if it becomes ready we somehow need to
+		       disable this check (without breaking the PCC/GCC2.4
+		       case).
+
+		       Sigh.
+
+		       Fortunately, this check seems not to be necessary
+		       for anything except pointers or functions.  */
+		    ;
+		  }
+		else
+		  TYPE_NAME (SYMBOL_TYPE (sym)) =
+		    concat (SYMBOL_NAME (sym), NULL);
+	      }
+#ifdef CXUX_TARGET
+	    /* Ignore vendor section for Harris CX/UX targets. */
+            else if (cs->c_name[0] == '$') 
+	      break;
+#endif /* CXUX_TARGET */
+
+	    /* Keep track of any type which points to empty structured type,
+		so it can be filled from a definition from another file.  A
+		simple forward reference (TYPE_CODE_UNDEF) is not an
+		empty structured type, though; the forward references
+		work themselves out via the magic of coff_lookup_type.  */
+	    if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_PTR &&
+		TYPE_LENGTH (TYPE_TARGET_TYPE (SYMBOL_TYPE (sym))) == 0 &&
+		TYPE_CODE   (TYPE_TARGET_TYPE (SYMBOL_TYPE (sym))) !=
+						TYPE_CODE_UNDEF)
+	      {
+		register int i = hashname (SYMBOL_NAME (sym));
+
+		SYMBOL_VALUE_CHAIN (sym) = opaque_type_chain[i];
+		opaque_type_chain[i] = sym;
+	      }
+	    add_symbol_to_list (sym, &file_symbols);
+	    break;
+
+	  case C_STRTAG:
+	  case C_UNTAG:
+	  case C_ENTAG:
+	    SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	    SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+
+            /* Some compilers try to be helpful by inventing "fake"
+               names for anonymous enums, structures, and unions, like
+               "~0fake" or ".0fake".  Thanks, but no thanks... */
+	    if (TYPE_TAG_NAME (SYMBOL_TYPE (sym)) == 0)
+	      if (SYMBOL_NAME(sym) != NULL
+		  && *SYMBOL_NAME(sym) != '~'
+		  && *SYMBOL_NAME(sym) != '.')
+		TYPE_TAG_NAME (SYMBOL_TYPE (sym)) =
+		  concat (SYMBOL_NAME (sym), NULL);
+
+	    add_symbol_to_list (sym, &file_symbols);
+	    break;
+
+	  default:
+	    break;
+	}
+    }
+  return sym;
+}
+
+/* Decode a coff type specifier;  return the type that is meant.  */
+
+static struct type *
+decode_type (cs, c_type, aux)
+     register struct coff_symbol *cs;
+     unsigned int c_type;
+     register union internal_auxent *aux;
+{
+  register struct type *type = 0;
+  unsigned int new_c_type;
+
+  if (c_type & ~N_BTMASK)
+    {
+      new_c_type = DECREF (c_type);
+      if (ISPTR (c_type))
+	{
+	  type = decode_type (cs, new_c_type, aux);
+	  type = lookup_pointer_type (type);
+	}
+      else if (ISFCN (c_type))
+	{
+	  type = decode_type (cs, new_c_type, aux);
+	  type = lookup_function_type (type);
+	}
+      else if (ISARY (c_type))
+	{
+	  int i, n;
+	  register unsigned short *dim;
+	  struct type *base_type, *index_type, *range_type;
+
+	  /* Define an array type.  */
+	  /* auxent refers to array, not base type */
+	  if (aux->x_sym.x_tagndx.l == 0)
+	    cs->c_naux = 0;
+
+	  /* shift the indices down */
+	  dim = &aux->x_sym.x_fcnary.x_ary.x_dimen[0];
+	  i = 1;
+	  n = dim[0];
+	  for (i = 0; *dim && i < DIMNUM - 1; i++, dim++)
+	    *dim = *(dim + 1);
+	  *dim = 0;
+
+	  base_type = decode_type (cs, new_c_type, aux);
+	  index_type = lookup_fundamental_type (current_objfile, FT_INTEGER);
+	  range_type =
+	    create_range_type ((struct type *) NULL, index_type, 0, n - 1);
+	  type =
+	    create_array_type ((struct type *) NULL, base_type, range_type);
+	}
+      return type;
+    }
+
+  /* Reference to existing type.  This only occurs with the
+     struct, union, and enum types.  EPI a29k coff
+     fakes us out by producing aux entries with a nonzero
+     x_tagndx for definitions of structs, unions, and enums, so we
+     have to check the c_sclass field.  SCO 3.2v4 cc gets confused
+     with pointers to pointers to defined structs, and generates
+     negative x_tagndx fields.  */
+  if (cs->c_naux > 0 && aux->x_sym.x_tagndx.l != 0)
+    {
+      if (cs->c_sclass != C_STRTAG
+	  && cs->c_sclass != C_UNTAG
+	  && cs->c_sclass != C_ENTAG
+	  && aux->x_sym.x_tagndx.l >= 0)
+	{
+	  type = coff_alloc_type (aux->x_sym.x_tagndx.l);
+	  return type;
+	}
+      else
+	{
+	  complain (&tagndx_bad_complaint, cs->c_name);
+	  /* And fall through to decode_base_type... */
+	}
+    }
+
+  return decode_base_type (cs, BTYPE (c_type), aux);
+}
+
+/* Decode a coff type specifier for function definition;
+   return the type that the function returns.  */
+
+static struct type *
+decode_function_type (cs, c_type, aux)
+     register struct coff_symbol *cs;
+     unsigned int c_type;
+     register union internal_auxent *aux;
+{
+  if (aux->x_sym.x_tagndx.l == 0)
+    cs->c_naux = 0;	/* auxent refers to function, not base type */
+
+  return decode_type (cs, DECREF (c_type), aux);
+}
+
+/* basic C types */
+
+static struct type *
+decode_base_type (cs, c_type, aux)
+     register struct coff_symbol *cs;
+     unsigned int c_type;
+     register union internal_auxent *aux;
+{
+  struct type *type;
+
+  switch (c_type)
+    {
+      case T_NULL:
+        /* shows up with "void (*foo)();" structure members */
+	return lookup_fundamental_type (current_objfile, FT_VOID);
+
+#if 0
+/* DGUX actually defines both T_ARG and T_VOID to the same value.  */
+#ifdef T_ARG
+      case T_ARG:
+	/* Shows up in DGUX, I think.  Not sure where.  */
+	return lookup_fundamental_type (current_objfile, FT_VOID);	/* shouldn't show up here */
+#endif
+#endif /* 0 */
+
+#ifdef T_VOID
+      case T_VOID:
+	/* Intel 960 COFF has this symbol and meaning.  */
+	return lookup_fundamental_type (current_objfile, FT_VOID);
+#endif
+
+      case T_CHAR:
+	return lookup_fundamental_type (current_objfile, FT_CHAR);
+
+      case T_SHORT:
+	return lookup_fundamental_type (current_objfile, FT_SHORT);
+
+      case T_INT:
+	return lookup_fundamental_type (current_objfile, FT_INTEGER);
+
+      case T_LONG:
+	if (cs->c_sclass == C_FIELD
+	    && aux->x_sym.x_misc.x_lnsz.x_size > TARGET_LONG_BIT)
+	  return lookup_fundamental_type (current_objfile, FT_LONG_LONG);
+	else
+	  return lookup_fundamental_type (current_objfile, FT_LONG);
+
+      case T_FLOAT:
+	return lookup_fundamental_type (current_objfile, FT_FLOAT);
+
+      case T_DOUBLE:
+	return lookup_fundamental_type (current_objfile, FT_DBL_PREC_FLOAT);
+
+      case T_LNGDBL:
+	return lookup_fundamental_type (current_objfile, FT_EXT_PREC_FLOAT);
+
+      case T_STRUCT:
+	if (cs->c_naux != 1)
+	  {
+	    /* anonymous structure type */
+	    type = coff_alloc_type (cs->c_symnum);
+	    TYPE_CODE (type) = TYPE_CODE_STRUCT;
+	    TYPE_NAME (type) = NULL;
+	    /* This used to set the tag to "<opaque>".  But I think setting it
+	       to NULL is right, and the printing code can print it as
+	       "struct {...}".  */
+	    TYPE_TAG_NAME (type) = NULL;
+	    INIT_CPLUS_SPECIFIC(type);
+	    TYPE_LENGTH (type) = 0;
+	    TYPE_FIELDS (type) = 0;
+	    TYPE_NFIELDS (type) = 0;
+	  }
+	else
+	  {
+	    type = coff_read_struct_type (cs->c_symnum,
+				    aux->x_sym.x_misc.x_lnsz.x_size,
+				    aux->x_sym.x_fcnary.x_fcn.x_endndx.l);
+	  }
+	return type;
+
+      case T_UNION:
+	if (cs->c_naux != 1)
+	  {
+	    /* anonymous union type */
+	    type = coff_alloc_type (cs->c_symnum);
+	    TYPE_NAME (type) = NULL;
+	    /* This used to set the tag to "<opaque>".  But I think setting it
+	       to NULL is right, and the printing code can print it as
+	       "union {...}".  */
+	    TYPE_TAG_NAME (type) = NULL;
+	    INIT_CPLUS_SPECIFIC(type);
+	    TYPE_LENGTH (type) = 0;
+	    TYPE_FIELDS (type) = 0;
+	    TYPE_NFIELDS (type) = 0;
+	  }
+	else
+	  {
+	    type = coff_read_struct_type (cs->c_symnum,
+				    aux->x_sym.x_misc.x_lnsz.x_size,
+				    aux->x_sym.x_fcnary.x_fcn.x_endndx.l);
+	  }
+	TYPE_CODE (type) = TYPE_CODE_UNION;
+	return type;
+
+      case T_ENUM:
+	if (cs->c_naux != 1)
+	  {
+	    /* anonymous enum type */
+	    type = coff_alloc_type (cs->c_symnum);
+	    TYPE_CODE (type) = TYPE_CODE_ENUM;
+	    TYPE_NAME (type) = NULL;
+	    /* This used to set the tag to "<opaque>".  But I think setting it
+	       to NULL is right, and the printing code can print it as
+	       "enum {...}".  */
+	    TYPE_TAG_NAME (type) = NULL;
+	    TYPE_LENGTH (type) = 0;
+	    TYPE_FIELDS (type) = 0;
+	    TYPE_NFIELDS(type) = 0;
+	  }
+	else
+	  {
+	    type = coff_read_enum_type (cs->c_symnum,
+					aux->x_sym.x_misc.x_lnsz.x_size,
+					aux->x_sym.x_fcnary.x_fcn.x_endndx.l);
+	  }
+	return type;
+
+      case T_MOE:
+	/* shouldn't show up here */
+	break;
+
+      case T_UCHAR:
+	return lookup_fundamental_type (current_objfile, FT_UNSIGNED_CHAR);
+
+      case T_USHORT:
+	return lookup_fundamental_type (current_objfile, FT_UNSIGNED_SHORT);
+
+      case T_UINT:
+	return lookup_fundamental_type (current_objfile, FT_UNSIGNED_INTEGER);
+
+      case T_ULONG:
+	if (cs->c_sclass == C_FIELD
+	    && aux->x_sym.x_misc.x_lnsz.x_size > TARGET_LONG_BIT)
+	  return lookup_fundamental_type (current_objfile, FT_UNSIGNED_LONG_LONG);
+	else
+	  return lookup_fundamental_type (current_objfile, FT_UNSIGNED_LONG);
+    }
+  complain (&unexpected_type_complaint, cs->c_name);
+  return lookup_fundamental_type (current_objfile, FT_VOID);
+}
+
+/* This page contains subroutines of read_type.  */
+
+/* Read the description of a structure (or union type) and return an
+   object describing the type.  */
+
+static struct type *
+coff_read_struct_type (index, length, lastsym)
+     int index;
+     int length;
+     int lastsym;
+{
+  struct nextfield
+    {
+      struct nextfield *next;
+      struct field field;
+    };
+
+  register struct type *type;
+  register struct nextfield *list = 0;
+  struct nextfield *new;
+  int nfields = 0;
+  register int n;
+  char *name;
+  struct coff_symbol member_sym;
+  register struct coff_symbol *ms = &member_sym;
+  struct internal_syment sub_sym;
+  union internal_auxent sub_aux;
+  int done = 0;
+
+  type = coff_alloc_type (index);
+  TYPE_CODE (type) = TYPE_CODE_STRUCT;
+  INIT_CPLUS_SPECIFIC(type);
+  TYPE_LENGTH (type) = length;
+
+  while (!done && symnum < lastsym && symnum < nlist_nsyms_global)
+    {
+      read_one_sym (ms, &sub_sym, &sub_aux);
+      name = ms->c_name;
+      name = EXTERNAL_NAME (name, current_objfile->obfd);
+
+      switch (ms->c_sclass)
+	{
+	  case C_MOS:
+	  case C_MOU:
+
+	    /* Get space to record the next field's data.  */
+	    new = (struct nextfield *) alloca (sizeof (struct nextfield));
+	    new->next = list;
+	    list = new;
+
+	    /* Save the data.  */
+	    list->field.name =
+	      obsavestring (name,
+			    strlen (name),
+			    &current_objfile->symbol_obstack);
+	    FIELD_TYPE (list->field) = decode_type (ms, ms->c_type, &sub_aux);
+	    FIELD_BITPOS (list->field) = 8 * ms->c_value;
+	    FIELD_BITSIZE (list->field) = 0;
+	    nfields++;
+	    break;
+
+	  case C_FIELD:
+
+	    /* Get space to record the next field's data.  */
+	    new = (struct nextfield *) alloca (sizeof (struct nextfield));
+	    new->next = list;
+	    list = new;
+
+	    /* Save the data.  */
+	    list->field.name =
+	      obsavestring (name,
+			    strlen (name),
+			    &current_objfile->symbol_obstack);
+	    FIELD_TYPE (list->field) = decode_type (ms, ms->c_type, &sub_aux);
+	    FIELD_BITPOS (list->field) = ms->c_value;
+	    FIELD_BITSIZE (list->field) = sub_aux.x_sym.x_misc.x_lnsz.x_size;
+	    nfields++;
+	    break;
+
+	  case C_EOS:
+	    done = 1;
+	    break;
+	}
+    }
+  /* Now create the vector of fields, and record how big it is.  */
+
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nfields);
+
+  /* Copy the saved-up fields into the field vector.  */
+
+  for (n = nfields; list; list = list->next)
+    TYPE_FIELD (type, --n) = list->field;
+
+  return type;
+}
+
+/* Read a definition of an enumeration type,
+   and create and return a suitable type object.
+   Also defines the symbols that represent the values of the type.  */
+
+/* ARGSUSED */
+static struct type *
+coff_read_enum_type (index, length, lastsym)
+     int index;
+     int length;
+     int lastsym;
+{
+  register struct symbol *sym;
+  register struct type *type;
+  int nsyms = 0;
+  int done = 0;
+  struct pending **symlist;
+  struct coff_symbol member_sym;
+  register struct coff_symbol *ms = &member_sym;
+  struct internal_syment sub_sym;
+  union internal_auxent sub_aux;
+  struct pending *osyms, *syms;
+  int o_nsyms;
+  register int n;
+  char *name;
+  int unsigned_enum = 1;
+
+  type = coff_alloc_type (index);
+  if (within_function)
+    symlist = &local_symbols;
+  else
+    symlist = &file_symbols;
+  osyms = *symlist;
+  o_nsyms = osyms ? osyms->nsyms : 0;
+
+  while (!done && symnum < lastsym && symnum < nlist_nsyms_global)
+    {
+      read_one_sym (ms, &sub_sym, &sub_aux);
+      name = ms->c_name;
+      name = EXTERNAL_NAME (name, current_objfile->obfd);
+
+      switch (ms->c_sclass)
+	{
+	  case C_MOE:
+	    sym = (struct symbol *) obstack_alloc
+	      (&current_objfile->symbol_obstack,
+	       sizeof (struct symbol));
+	    memset (sym, 0, sizeof (struct symbol));
+
+	    SYMBOL_NAME (sym) =
+	      obsavestring (name, strlen (name),
+			    &current_objfile->symbol_obstack);
+	    SYMBOL_CLASS (sym) = LOC_CONST;
+	    SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	    SYMBOL_VALUE (sym) = ms->c_value;
+	    add_symbol_to_list (sym, symlist);
+	    nsyms++;
+	    break;
+
+	  case C_EOS:
+	    /* Sometimes the linker (on 386/ix 2.0.2 at least) screws
+	       up the count of how many symbols to read.  So stop
+	       on .eos.  */
+	    done = 1;
+	    break;
+	}
+    }
+
+  /* Now fill in the fields of the type-structure.  */
+
+  if (length > 0)
+    TYPE_LENGTH (type) = length;
+  else
+    TYPE_LENGTH (type) = TARGET_INT_BIT / TARGET_CHAR_BIT; /* Assume ints */
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the values and put them into the type.
+     The symbols can be found in the symlist that we put them on
+     to cause them to be defined.  osyms contains the old value
+     of that symlist; everything up to there was defined by us.  */
+  /* Note that we preserve the order of the enum constants, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+
+  for (syms = *symlist, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+
+      if (syms == osyms)
+	j = o_nsyms;
+      for (; j < syms->nsyms; j++,n++)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  SYMBOL_TYPE (xsym) = type;
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = SYMBOL_VALUE (xsym);
+	  if (SYMBOL_VALUE (xsym) < 0)
+	    unsigned_enum = 0;
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+      if (syms == osyms)
+	break;
+    }
+
+  if (unsigned_enum)
+    TYPE_FLAGS (type) |= TYPE_FLAG_UNSIGNED;
+
+  return type;
+}
+
+/* Register our ability to parse symbols for coff BFD files. */
+
+static struct sym_fns coff_sym_fns =
+{
+  bfd_target_coff_flavour,
+  coff_new_init,	/* sym_new_init: init anything gbl to entire symtab */
+  coff_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  coff_symfile_read,	/* sym_read: read a symbol file into symtab */
+  coff_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,
+			/* sym_offsets:  xlate external to internal form */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_coffread ()
+{
+  add_symtab_fns (&coff_sym_fns);
+}
diff --git a/gdb/command.c b/gdb/command.c
new file mode 100644
index 0000000..58af567
--- /dev/null
+++ b/gdb/command.c
@@ -0,0 +1,1564 @@
+/* Handle lists of commands, their decoding and documentation, for GDB.
+   Copyright 1986, 1989, 1990, 1991, 1998 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcmd.h"
+#include "symtab.h"
+#include "value.h"
+#include <ctype.h>
+#include "gdb_string.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_WAIT_H
+# include <wait.h>
+#else
+# ifdef HAVE_SYS_WAIT_H
+#  include <sys/wait.h>
+# endif
+#endif
+
+#include "wait.h"
+
+/* Prototypes for local functions */
+
+static void undef_cmd_error PARAMS ((char *, char *));
+
+static void show_user PARAMS ((char *, int));
+
+static void show_user_1 PARAMS ((struct cmd_list_element *, GDB_FILE *));
+
+static void make_command PARAMS ((char *, int));
+
+static void shell_escape PARAMS ((char *, int));
+
+static int parse_binary_operation PARAMS ((char *));
+
+static void print_doc_line PARAMS ((GDB_FILE *, char *));
+
+void _initialize_command PARAMS ((void));
+
+/* Add element named NAME.
+   CLASS is the top level category into which commands are broken down
+   for "help" purposes.
+   FUN should be the function to execute the command;
+   it will get a character string as argument, with leading
+   and trailing blanks already eliminated.
+
+   DOC is a documentation string for the command.
+   Its first line should be a complete sentence.
+   It should start with ? for a command that is an abbreviation
+   or with * for a command that most users don't need to know about.
+
+   Add this command to command list *LIST.  
+
+   Returns a pointer to the added command (not necessarily the head 
+   of *LIST). */
+
+struct cmd_list_element *
+add_cmd (name, class, fun, doc, list)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+     struct cmd_list_element **list;
+{
+  register struct cmd_list_element *c
+    = (struct cmd_list_element *) xmalloc (sizeof (struct cmd_list_element));
+  struct cmd_list_element *p;
+
+  delete_cmd (name, list);
+
+  if (*list == NULL || STRCMP ((*list)->name, name) >= 0)
+    {
+      c->next = *list;
+      *list = c;
+    }
+  else
+    {
+      p = *list;
+      while (p->next && STRCMP (p->next->name, name) <= 0)
+        {
+          p = p->next;
+        }
+      c->next = p->next;
+      p->next = c;
+    }
+
+  c->name = name;
+  c->class = class;
+  c->function.cfunc = fun;
+  c->doc = doc;
+  c->hook = NULL;
+  c->prefixlist = NULL;
+  c->prefixname = NULL;
+  c->allow_unknown = 0;
+  c->abbrev_flag = 0;
+  c->completer = make_symbol_completion_list;
+  c->type = not_set_cmd;
+  c->var = NULL;
+  c->var_type = var_boolean;
+  c->enums = NULL;
+  c->user_commands = NULL;
+  c->hookee = NULL;
+  c->cmd_pointer = NULL;
+
+  return c;
+}
+
+/* Same as above, except that the abbrev_flag is set. */
+
+#if 0	/* Currently unused */
+
+struct cmd_list_element *
+add_abbrev_cmd (name, class, fun, doc, list)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+     struct cmd_list_element **list;
+{
+  register struct cmd_list_element *c
+    = add_cmd (name, class, fun, doc, list);
+
+  c->abbrev_flag = 1;
+  return c;
+}
+
+#endif
+
+struct cmd_list_element *
+add_alias_cmd (name, oldname, class, abbrev_flag, list)
+     char *name;
+     char *oldname;
+     enum command_class class;
+     int abbrev_flag;
+     struct cmd_list_element **list;
+{
+  /* Must do this since lookup_cmd tries to side-effect its first arg */
+  char *copied_name;
+  register struct cmd_list_element *old;
+  register struct cmd_list_element *c;
+  copied_name = (char *) alloca (strlen (oldname) + 1);
+  strcpy (copied_name, oldname);
+  old  = lookup_cmd (&copied_name, *list, "", 1, 1);
+
+  if (old == 0)
+    {
+      delete_cmd (name, list);
+      return 0;
+    }
+
+  c = add_cmd (name, class, old->function.cfunc, old->doc, list);
+  c->prefixlist = old->prefixlist;
+  c->prefixname = old->prefixname;
+  c->allow_unknown = old->allow_unknown;
+  c->abbrev_flag = abbrev_flag;
+  c->cmd_pointer = old;
+  return c;
+}
+
+/* Like add_cmd but adds an element for a command prefix:
+   a name that should be followed by a subcommand to be looked up
+   in another command list.  PREFIXLIST should be the address
+   of the variable containing that list.  */
+
+struct cmd_list_element *
+add_prefix_cmd (name, class, fun, doc, prefixlist, prefixname,
+		allow_unknown, list)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+     struct cmd_list_element **prefixlist;
+     char *prefixname;
+     int allow_unknown;
+     struct cmd_list_element **list;
+{
+  register struct cmd_list_element *c = add_cmd (name, class, fun, doc, list);
+  c->prefixlist = prefixlist;
+  c->prefixname = prefixname;
+  c->allow_unknown = allow_unknown;
+  return c;
+}
+
+/* Like add_prefix_cmd but sets the abbrev_flag on the new command. */
+   
+struct cmd_list_element *
+add_abbrev_prefix_cmd (name, class, fun, doc, prefixlist, prefixname,
+		       allow_unknown, list)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+     struct cmd_list_element **prefixlist;
+     char *prefixname;
+     int allow_unknown;
+     struct cmd_list_element **list;
+{
+  register struct cmd_list_element *c = add_cmd (name, class, fun, doc, list);
+  c->prefixlist = prefixlist;
+  c->prefixname = prefixname;
+  c->allow_unknown = allow_unknown;
+  c->abbrev_flag = 1;
+  return c;
+}
+
+/* This is an empty "cfunc".  */
+void
+not_just_help_class_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+}
+
+/* This is an empty "sfunc".  */
+static void empty_sfunc PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+empty_sfunc (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+}
+
+/* Add element named NAME to command list LIST (the list for set
+   or some sublist thereof).
+   CLASS is as in add_cmd.
+   VAR_TYPE is the kind of thing we are setting.
+   VAR is address of the variable being controlled by this command.
+   DOC is the documentation string.  */
+
+struct cmd_list_element *
+add_set_cmd (name, class, var_type, var, doc, list)
+     char *name;
+     enum command_class class;
+     var_types var_type;
+     char *var;
+     char *doc;
+     struct cmd_list_element **list;
+{
+  struct cmd_list_element *c
+    = add_cmd (name, class, NO_FUNCTION, doc, list);
+
+  c->type = set_cmd;
+  c->var_type = var_type;
+  c->var = var;
+  /* This needs to be something besides NO_FUNCTION so that this isn't
+     treated as a help class.  */
+  c->function.sfunc = empty_sfunc;
+  return c;
+}
+
+/* Add element named NAME to command list LIST (the list for set
+   or some sublist thereof).
+   CLASS is as in add_cmd.
+   ENUMLIST is a list of strings which may follow NAME.
+   VAR is address of the variable which will contain the matching string
+     (from ENUMLIST).
+   DOC is the documentation string.  */
+
+struct cmd_list_element *
+add_set_enum_cmd (name, class, enumlist, var, doc, list)
+     char *name;
+     enum command_class class;
+     char *enumlist[];
+     char *var;
+     char *doc;
+     struct cmd_list_element **list;
+{
+  struct cmd_list_element *c
+    = add_set_cmd (name, class, var_enum, var, doc, list);
+  c->enums = enumlist;
+
+  return c;
+}
+
+/* Where SETCMD has already been added, add the corresponding show
+   command to LIST and return a pointer to the added command (not 
+   necessarily the head of LIST).  */
+struct cmd_list_element *
+add_show_from_set (setcmd, list)
+     struct cmd_list_element *setcmd;
+     struct cmd_list_element **list;
+{
+  struct cmd_list_element *showcmd =
+    (struct cmd_list_element *) xmalloc (sizeof (struct cmd_list_element));
+  struct cmd_list_element *p;
+
+  memcpy (showcmd, setcmd, sizeof (struct cmd_list_element));
+  delete_cmd (showcmd->name, list);
+  showcmd->type = show_cmd;
+  
+  /* Replace "set " at start of docstring with "show ".  */
+  if (setcmd->doc[0] == 'S' && setcmd->doc[1] == 'e'
+      && setcmd->doc[2] == 't' && setcmd->doc[3] == ' ')
+    showcmd->doc = concat ("Show ", setcmd->doc + 4, NULL);
+  else
+    fprintf_unfiltered (gdb_stderr, "GDB internal error: Bad docstring for set command\n");
+  
+    if (*list == NULL || STRCMP ((*list)->name, showcmd->name) >= 0)
+    {
+      showcmd->next = *list;
+      *list = showcmd;
+    }
+  else
+    {
+      p = *list;
+      while (p->next && STRCMP (p->next->name, showcmd->name) <= 0)
+        {
+          p = p->next;
+        }
+      showcmd->next = p->next;
+      p->next = showcmd;
+    }
+
+  return showcmd;
+}
+
+/* Remove the command named NAME from the command list.  */
+
+void
+delete_cmd (name, list)
+     char *name;
+     struct cmd_list_element **list;
+{
+  register struct cmd_list_element *c;
+  struct cmd_list_element *p;
+
+  while (*list && STREQ ((*list)->name, name))
+    {
+      if ((*list)->hookee)
+	(*list)->hookee->hook = 0;	/* Hook slips out of its mouth */
+      p = (*list)->next;
+      free ((PTR)*list);
+      *list = p;
+    }
+
+  if (*list)
+    for (c = *list; c->next;)
+      {
+	if (STREQ (c->next->name, name))
+	  {
+	    if (c->next->hookee)
+	      c->next->hookee->hook = 0;  /* hooked cmd gets away.  */
+	    p = c->next->next;
+	    free ((PTR)c->next);
+	    c->next = p;
+	  }
+	else
+	  c = c->next;
+      }
+}
+
+/* This command really has to deal with two things:
+ *     1) I want documentation on *this string* (usually called by
+ * "help commandname").
+ *     2) I want documentation on *this list* (usually called by
+ * giving a command that requires subcommands.  Also called by saying
+ * just "help".)
+ *
+ *   I am going to split this into two seperate comamnds, help_cmd and
+ * help_list. 
+ */
+
+void
+help_cmd (command, stream)
+     char *command;
+     GDB_FILE *stream;
+{
+  struct cmd_list_element *c;
+  extern struct cmd_list_element *cmdlist;
+
+  if (!command)
+    {
+      help_list (cmdlist, "", all_classes, stream);
+      return;
+    }
+
+  c = lookup_cmd (&command, cmdlist, "", 0, 0);
+
+  if (c == 0)
+    return;
+
+  /* There are three cases here.
+     If c->prefixlist is nonzero, we have a prefix command.
+     Print its documentation, then list its subcommands.
+     
+     If c->function is nonzero, we really have a command.
+     Print its documentation and return.
+     
+     If c->function is zero, we have a class name.
+     Print its documentation (as if it were a command)
+     and then set class to the number of this class
+     so that the commands in the class will be listed.  */
+
+  fputs_filtered (c->doc, stream);
+  fputs_filtered ("\n", stream);
+
+  if (c->prefixlist == 0 && c->function.cfunc != NULL)
+    return;
+  fprintf_filtered (stream, "\n");
+
+  /* If this is a prefix command, print it's subcommands */
+  if (c->prefixlist)
+    help_list (*c->prefixlist, c->prefixname, all_commands, stream);
+
+  /* If this is a class name, print all of the commands in the class */
+  if (c->function.cfunc == NULL)
+    help_list (cmdlist, "", c->class, stream);
+
+  if (c->hook)
+    fprintf_filtered (stream, "\nThis command has a hook defined: %s\n",
+		      c->hook->name);
+}
+
+/*
+ * Get a specific kind of help on a command list.
+ *
+ * LIST is the list.
+ * CMDTYPE is the prefix to use in the title string.
+ * CLASS is the class with which to list the nodes of this list (see
+ * documentation for help_cmd_list below),  As usual, ALL_COMMANDS for
+ * everything, ALL_CLASSES for just classes, and non-negative for only things
+ * in a specific class.
+ * and STREAM is the output stream on which to print things.
+ * If you call this routine with a class >= 0, it recurses.
+ */
+void
+help_list (list, cmdtype, class, stream)
+     struct cmd_list_element *list;
+     char *cmdtype;
+     enum command_class class;
+     GDB_FILE *stream;
+{
+  int len;
+  char *cmdtype1, *cmdtype2;
+  
+  /* If CMDTYPE is "foo ", CMDTYPE1 gets " foo" and CMDTYPE2 gets "foo sub"  */
+  len = strlen (cmdtype);
+  cmdtype1 = (char *) alloca (len + 1);
+  cmdtype1[0] = 0;
+  cmdtype2 = (char *) alloca (len + 4);
+  cmdtype2[0] = 0;
+  if (len)
+    {
+      cmdtype1[0] = ' ';
+      strncpy (cmdtype1 + 1, cmdtype, len - 1);
+      cmdtype1[len] = 0;
+      strncpy (cmdtype2, cmdtype, len - 1);
+      strcpy (cmdtype2 + len - 1, " sub");
+    }
+
+  if (class == all_classes)
+    fprintf_filtered (stream, "List of classes of %scommands:\n\n", cmdtype2);
+  else
+    fprintf_filtered (stream, "List of %scommands:\n\n", cmdtype2);
+
+  help_cmd_list (list, class, cmdtype, (int)class >= 0, stream);
+
+  if (class == all_classes)
+    fprintf_filtered (stream, "\n\
+Type \"help%s\" followed by a class name for a list of commands in that class.",
+	     cmdtype1);
+
+  fprintf_filtered (stream, "\n\
+Type \"help%s\" followed by %scommand name for full documentation.\n\
+Command name abbreviations are allowed if unambiguous.\n",
+	   cmdtype1, cmdtype2);
+}
+     
+/* Print only the first line of STR on STREAM.  */
+static void
+print_doc_line (stream, str)
+     GDB_FILE *stream;
+     char *str;
+{
+  static char *line_buffer = 0;
+  static int line_size;
+  register char *p;
+
+  if (!line_buffer)
+    {
+      line_size = 80;
+      line_buffer = (char *) xmalloc (line_size);
+    }
+
+  p = str;
+  while (*p && *p != '\n' && *p != '.' && *p != ',')
+    p++;
+  if (p - str > line_size - 1)
+    {
+      line_size = p - str + 1;
+      free ((PTR)line_buffer);
+      line_buffer = (char *) xmalloc (line_size);
+    }
+  strncpy (line_buffer, str, p - str);
+  line_buffer[p - str] = '\0';
+  if (islower (line_buffer[0]))
+    line_buffer[0] = toupper (line_buffer[0]);
+  fputs_filtered (line_buffer, stream);
+}
+
+/*
+ * Implement a help command on command list LIST.
+ * RECURSE should be non-zero if this should be done recursively on
+ * all sublists of LIST.
+ * PREFIX is the prefix to print before each command name.
+ * STREAM is the stream upon which the output should be written.
+ * CLASS should be:
+ *	A non-negative class number to list only commands in that
+ * class.
+ *	ALL_COMMANDS to list all commands in list.
+ *	ALL_CLASSES  to list all classes in list.
+ *
+ *   Note that RECURSE will be active on *all* sublists, not just the
+ * ones selected by the criteria above (ie. the selection mechanism
+ * is at the low level, not the high-level).
+ */
+void
+help_cmd_list (list, class, prefix, recurse, stream)
+     struct cmd_list_element *list;
+     enum command_class class;
+     char *prefix;
+     int recurse;
+     GDB_FILE *stream;
+{
+  register struct cmd_list_element *c;
+
+  for (c = list; c; c = c->next)
+    {
+      if (c->abbrev_flag == 0 &&
+	  (class == all_commands
+	  || (class == all_classes && c->function.cfunc == NULL)
+	  || (class == c->class && c->function.cfunc != NULL)))
+	{
+	  fprintf_filtered (stream, "%s%s -- ", prefix, c->name);
+	  print_doc_line (stream, c->doc);
+	  fputs_filtered ("\n", stream);
+	}
+      if (recurse
+	  && c->prefixlist != 0
+	  && c->abbrev_flag == 0)
+	help_cmd_list (*c->prefixlist, class, c->prefixname, 1, stream);
+    }
+}
+
+
+/* Search the input clist for 'command'.  Return the command if
+   found (or NULL if not), and return the number of commands
+   found in nfound */
+
+static struct cmd_list_element *
+find_cmd(command, len, clist, ignore_help_classes, nfound)
+     char *command;
+     struct cmd_list_element *clist;
+     int ignore_help_classes;
+     int *nfound;
+{
+  struct cmd_list_element *found, *c;
+
+  found = (struct cmd_list_element *)NULL;
+  *nfound = 0;
+  for (c = clist; c; c = c->next)
+    if (!strncmp (command, c->name, len)
+        && (!ignore_help_classes || c->function.cfunc))
+      {
+        found = c;
+        (*nfound)++;
+        if (c->name[len] == '\0')
+          {
+            *nfound = 1;
+            break;
+          }
+      }
+  return found;
+}
+
+/* This routine takes a line of TEXT and a CLIST in which to start the
+   lookup.  When it returns it will have incremented the text pointer past
+   the section of text it matched, set *RESULT_LIST to point to the list in
+   which the last word was matched, and will return a pointer to the cmd
+   list element which the text matches.  It will return NULL if no match at
+   all was possible.  It will return -1 (cast appropriately, ick) if ambigous
+   matches are possible; in this case *RESULT_LIST will be set to point to
+   the list in which there are ambiguous choices (and *TEXT will be set to
+   the ambiguous text string).
+
+   If the located command was an abbreviation, this routine returns the base
+   command of the abbreviation.
+
+   It does no error reporting whatsoever; control will always return
+   to the superior routine.
+
+   In the case of an ambiguous return (-1), *RESULT_LIST will be set to point
+   at the prefix_command (ie. the best match) *or* (special case) will be NULL
+   if no prefix command was ever found.  For example, in the case of "info a",
+   "info" matches without ambiguity, but "a" could be "args" or "address", so
+   *RESULT_LIST is set to the cmd_list_element for "info".  So in this case
+   RESULT_LIST should not be interpeted as a pointer to the beginning of a
+   list; it simply points to a specific command.  In the case of an ambiguous
+   return *TEXT is advanced past the last non-ambiguous prefix (e.g.
+   "info t" can be "info types" or "info target"; upon return *TEXT has been
+   advanced past "info ").
+
+   If RESULT_LIST is NULL, don't set *RESULT_LIST (but don't otherwise
+   affect the operation).
+
+   This routine does *not* modify the text pointed to by TEXT.
+   
+   If IGNORE_HELP_CLASSES is nonzero, ignore any command list elements which
+   are actually help classes rather than commands (i.e. the function field of
+   the struct cmd_list_element is NULL).  */
+
+struct cmd_list_element *
+lookup_cmd_1 (text, clist, result_list, ignore_help_classes)
+     char **text;
+     struct cmd_list_element *clist, **result_list;
+     int ignore_help_classes;
+{
+  char *p, *command;
+  int len, tmp, nfound;
+  struct cmd_list_element *found, *c;
+
+  while (**text == ' ' || **text == '\t')
+    (*text)++;
+
+  /* Treating underscores as part of command words is important
+     so that "set args_foo()" doesn't get interpreted as
+     "set args _foo()".  */
+  for (p = *text;
+       *p && (isalnum(*p) || *p == '-' || *p == '_' ||
+	      (tui_version &&
+	       (*p == '+' || *p == '<' || *p == '>' || *p == '$')) ||
+	      (xdb_commands && (*p == '!' || *p == '/' || *p == '?')));
+       p++)
+    ;
+
+  /* If nothing but whitespace, return 0.  */
+  if (p == *text)
+    return 0;
+  
+  len = p - *text;
+
+  /* *text and p now bracket the first command word to lookup (and
+     it's length is len).  We copy this into a local temporary */
+
+
+  command = (char *) alloca (len + 1);
+  for (tmp = 0; tmp < len; tmp++)
+    {
+      char x = (*text)[tmp];
+      command[tmp] = x;
+    }
+  command[len] = '\0';
+
+  /* Look it up.  */
+  found = 0;
+  nfound = 0;
+  found = find_cmd(command, len, clist, ignore_help_classes, &nfound);
+
+  /* 
+  ** We didn't find the command in the entered case, so lower case it
+  ** and search again.
+  */
+  if (!found || nfound == 0)
+    {
+      for (tmp = 0; tmp < len; tmp++)
+        {
+          char x = command[tmp];
+          command[tmp] = isupper(x) ? tolower(x) : x;
+        }
+      found = find_cmd(command, len, clist, ignore_help_classes, &nfound);
+    }
+
+  /* If nothing matches, we have a simple failure.  */
+  if (nfound == 0)
+    return 0;
+
+  if (nfound > 1)
+    {
+      if (result_list != NULL)
+	/* Will be modified in calling routine
+	   if we know what the prefix command is.  */
+	*result_list = 0;		
+      return (struct cmd_list_element *) -1; /* Ambiguous.  */
+    }
+
+  /* We've matched something on this list.  Move text pointer forward. */
+
+  *text = p;
+
+  /* If this was an abbreviation, use the base command instead.  */
+
+  if (found->cmd_pointer)
+    found = found->cmd_pointer;
+
+  /* If we found a prefix command, keep looking.  */
+
+  if (found->prefixlist)
+    {
+      c = lookup_cmd_1 (text, *found->prefixlist, result_list,
+			ignore_help_classes);
+      if (!c)
+	{
+	  /* Didn't find anything; this is as far as we got.  */
+	  if (result_list != NULL)
+	    *result_list = clist;
+	  return found;
+	}
+      else if (c == (struct cmd_list_element *) -1)
+	{
+	  /* We've gotten this far properly, but the next step
+	     is ambiguous.  We need to set the result list to the best
+	     we've found (if an inferior hasn't already set it).  */
+	  if (result_list != NULL)
+	    if (!*result_list)
+	      /* This used to say *result_list = *found->prefixlist
+		 If that was correct, need to modify the documentation
+		 at the top of this function to clarify what is supposed
+		 to be going on.  */
+	      *result_list = found;
+	  return c;
+	}
+      else
+	{
+	  /* We matched!  */
+	  return c;
+	}
+    }
+  else
+    {
+      if (result_list != NULL)
+	*result_list = clist;
+      return found;
+    }
+}
+
+/* All this hair to move the space to the front of cmdtype */
+
+static void
+undef_cmd_error (cmdtype, q)
+     char *cmdtype, *q;
+{
+  error ("Undefined %scommand: \"%s\".  Try \"help%s%.*s\".",
+    cmdtype,
+    q,
+    *cmdtype? " ": "",
+    strlen(cmdtype)-1,
+    cmdtype);
+}
+
+/* Look up the contents of *LINE as a command in the command list LIST.
+   LIST is a chain of struct cmd_list_element's.
+   If it is found, return the struct cmd_list_element for that command
+   and update *LINE to point after the command name, at the first argument.
+   If not found, call error if ALLOW_UNKNOWN is zero
+   otherwise (or if error returns) return zero.
+   Call error if specified command is ambiguous,
+   unless ALLOW_UNKNOWN is negative.
+   CMDTYPE precedes the word "command" in the error message.
+
+   If INGNORE_HELP_CLASSES is nonzero, ignore any command list
+   elements which are actually help classes rather than commands (i.e.
+   the function field of the struct cmd_list_element is 0).  */
+
+struct cmd_list_element *
+lookup_cmd (line, list, cmdtype, allow_unknown, ignore_help_classes)
+     char **line;
+     struct cmd_list_element *list;
+     char *cmdtype;
+     int allow_unknown;
+     int ignore_help_classes;
+{
+  struct cmd_list_element *last_list = 0;
+  struct cmd_list_element *c =
+    lookup_cmd_1 (line, list, &last_list, ignore_help_classes);
+#if 0
+  /* This is wrong for complete_command.  */
+  char *ptr = (*line) + strlen (*line) - 1;
+
+  /* Clear off trailing whitespace.  */
+  while (ptr >= *line && (*ptr == ' ' || *ptr == '\t'))
+    ptr--;
+  *(ptr + 1) = '\0';
+#endif
+  
+  if (!c)
+    {
+      if (!allow_unknown)
+	{
+	  if (!*line)
+	    error ("Lack of needed %scommand", cmdtype);
+	  else
+	    {
+	      char *p = *line, *q;
+
+	      while (isalnum(*p) || *p == '-')
+		p++;
+
+	      q = (char *) alloca (p - *line + 1);
+	      strncpy (q, *line, p - *line);
+	      q[p - *line] = '\0';
+	      undef_cmd_error (cmdtype, q);
+	    }
+	}
+      else
+	return 0;
+    }
+  else if (c == (struct cmd_list_element *) -1)
+    {
+      /* Ambigous.  Local values should be off prefixlist or called
+	 values.  */
+      int local_allow_unknown = (last_list ? last_list->allow_unknown :
+				 allow_unknown);
+      char *local_cmdtype = last_list ? last_list->prefixname : cmdtype;
+      struct cmd_list_element *local_list =
+	(last_list ? *(last_list->prefixlist) : list);
+      
+      if (local_allow_unknown < 0)
+	{
+	  if (last_list)
+	    return last_list;	/* Found something.  */
+	  else
+	    return 0;		/* Found nothing.  */
+	}
+      else
+	{
+	  /* Report as error.  */
+	  int amb_len;
+	  char ambbuf[100];
+
+	  for (amb_len = 0;
+	       ((*line)[amb_len] && (*line)[amb_len] != ' '
+		&& (*line)[amb_len] != '\t');
+	       amb_len++)
+	    ;
+	  
+	  ambbuf[0] = 0;
+	  for (c = local_list; c; c = c->next)
+	    if (!strncmp (*line, c->name, amb_len))
+	      {
+		if (strlen (ambbuf) + strlen (c->name) + 6 < (int)sizeof ambbuf)
+		  {
+		    if (strlen (ambbuf))
+		      strcat (ambbuf, ", ");
+		    strcat (ambbuf, c->name);
+		  }
+		else
+		  {
+		    strcat (ambbuf, "..");
+		    break;
+		  }
+	      }
+	  error ("Ambiguous %scommand \"%s\": %s.", local_cmdtype,
+		 *line, ambbuf);
+	  return 0;		/* lint */
+	}
+    }
+  else
+    {
+      /* We've got something.  It may still not be what the caller
+         wants (if this command *needs* a subcommand).  */
+      while (**line == ' ' || **line == '\t')
+	(*line)++;
+
+      if (c->prefixlist && **line && !c->allow_unknown)
+	undef_cmd_error (c->prefixname, *line);
+
+      /* Seems to be what he wants.  Return it.  */
+      return c;
+    }
+  return 0;
+}
+	
+#if 0
+/* Look up the contents of *LINE as a command in the command list LIST.
+   LIST is a chain of struct cmd_list_element's.
+   If it is found, return the struct cmd_list_element for that command
+   and update *LINE to point after the command name, at the first argument.
+   If not found, call error if ALLOW_UNKNOWN is zero
+   otherwise (or if error returns) return zero.
+   Call error if specified command is ambiguous,
+   unless ALLOW_UNKNOWN is negative.
+   CMDTYPE precedes the word "command" in the error message.  */
+
+struct cmd_list_element *
+lookup_cmd (line, list, cmdtype, allow_unknown)
+     char **line;
+     struct cmd_list_element *list;
+     char *cmdtype;
+     int allow_unknown;
+{
+  register char *p;
+  register struct cmd_list_element *c, *found;
+  int nfound;
+  char ambbuf[100];
+  char *processed_cmd;
+  int i, cmd_len;
+
+  /* Skip leading whitespace.  */
+
+  while (**line == ' ' || **line == '\t')
+    (*line)++;
+
+  /* Clear out trailing whitespace.  */
+
+  p = *line + strlen (*line);
+  while (p != *line && (p[-1] == ' ' || p[-1] == '\t'))
+    p--;
+  *p = 0;
+
+  /* Find end of command name.  */
+
+  p = *line;
+  while (*p == '-' || isalnum(*p))
+    p++;
+
+  /* Look up the command name.
+     If exact match, keep that.
+     Otherwise, take command abbreviated, if unique.  Note that (in my
+     opinion) a null string does *not* indicate ambiguity; simply the
+     end of the argument.  */
+
+  if (p == *line)
+    {
+      if (!allow_unknown)
+	error ("Lack of needed %scommand", cmdtype);
+      return 0;
+    }
+  
+  /* Copy over to a local buffer, converting to lowercase on the way.
+     This is in case the command being parsed is a subcommand which
+     doesn't match anything, and that's ok.  We want the original
+     untouched for the routine of the original command.  */
+  
+  processed_cmd = (char *) alloca (p - *line + 1);
+  for (cmd_len = 0; cmd_len < p - *line; cmd_len++)
+    {
+      char x = (*line)[cmd_len];
+      if (isupper(x))
+	processed_cmd[cmd_len] = tolower(x);
+      else
+	processed_cmd[cmd_len] = x;
+    }
+  processed_cmd[cmd_len] = '\0';
+
+  /* Check all possibilities in the current command list.  */
+  found = 0;
+  nfound = 0;
+  for (c = list; c; c = c->next)
+    {
+      if (!strncmp (processed_cmd, c->name, cmd_len))
+	{
+	  found = c;
+	  nfound++;
+	  if (c->name[cmd_len] == 0)
+	    {
+	      nfound = 1;
+	      break;
+	    }
+	}
+    }
+
+  /* Report error for undefined command name.  */
+
+  if (nfound != 1)
+    {
+      if (nfound > 1 && allow_unknown >= 0)
+	{
+	  ambbuf[0] = 0;
+	  for (c = list; c; c = c->next)
+	    if (!strncmp (processed_cmd, c->name, cmd_len))
+	      {
+		if (strlen (ambbuf) + strlen (c->name) + 6 < sizeof ambbuf)
+		  {
+		    if (strlen (ambbuf))
+		      strcat (ambbuf, ", ");
+		    strcat (ambbuf, c->name);
+		  }
+		else
+		  {
+		    strcat (ambbuf, "..");
+		    break;
+		  }
+	      }
+	  error ("Ambiguous %scommand \"%s\": %s.", cmdtype,
+		 processed_cmd, ambbuf);
+	}
+      else if (!allow_unknown)
+	error ("Undefined %scommand: \"%s\".", cmdtype, processed_cmd);
+      return 0;
+    }
+
+  /* Skip whitespace before the argument.  */
+
+  while (*p == ' ' || *p == '\t') p++;
+  *line = p;
+
+  if (found->prefixlist && *p)
+    {
+      c = lookup_cmd (line, *found->prefixlist, found->prefixname,
+		      found->allow_unknown);
+      if (c)
+	return c;
+    }
+
+  return found;
+}
+#endif
+
+/* Helper function for SYMBOL_COMPLETION_FUNCTION.  */
+
+/* Return a vector of char pointers which point to the different
+   possible completions in LIST of TEXT.  
+
+   WORD points in the same buffer as TEXT, and completions should be
+   returned relative to this position.  For example, suppose TEXT is "foo"
+   and we want to complete to "foobar".  If WORD is "oo", return
+   "oobar"; if WORD is "baz/foo", return "baz/foobar".  */
+
+char **
+complete_on_cmdlist (list, text, word)
+     struct cmd_list_element *list;
+     char *text;
+     char *word;
+{
+  struct cmd_list_element *ptr;
+  char **matchlist;
+  int sizeof_matchlist;
+  int matches;
+  int textlen = strlen (text);
+
+  sizeof_matchlist = 10;
+  matchlist = (char **) xmalloc (sizeof_matchlist * sizeof (char *));
+  matches = 0;
+
+  for (ptr = list; ptr; ptr = ptr->next)
+    if (!strncmp (ptr->name, text, textlen)
+	&& !ptr->abbrev_flag
+	&& (ptr->function.cfunc
+	    || ptr->prefixlist))
+      {
+	if (matches == sizeof_matchlist)
+	  {
+	    sizeof_matchlist *= 2;
+	    matchlist = (char **) xrealloc ((char *)matchlist,
+					    (sizeof_matchlist
+					     * sizeof (char *)));
+	  }
+
+	matchlist[matches] = (char *) 
+	  xmalloc (strlen (word) + strlen (ptr->name) + 1);
+	if (word == text)
+	  strcpy (matchlist[matches], ptr->name);
+	else if (word > text)
+	  {
+	    /* Return some portion of ptr->name.  */
+	    strcpy (matchlist[matches], ptr->name + (word - text));
+	  }
+	else
+	  {
+	    /* Return some of text plus ptr->name.  */
+	    strncpy (matchlist[matches], word, text - word);
+	    matchlist[matches][text - word] = '\0';
+	    strcat (matchlist[matches], ptr->name);
+	  }
+	++matches;
+      }
+
+  if (matches == 0)
+    {
+      free ((PTR)matchlist);
+      matchlist = 0;
+    }
+  else
+    {
+      matchlist = (char **) xrealloc ((char *)matchlist, ((matches + 1)
+						* sizeof (char *)));
+      matchlist[matches] = (char *) 0;
+    }
+
+  return matchlist;
+}
+
+/* Helper function for SYMBOL_COMPLETION_FUNCTION.  */
+
+/* Return a vector of char pointers which point to the different
+   possible completions in CMD of TEXT.  
+
+   WORD points in the same buffer as TEXT, and completions should be
+   returned relative to this position.  For example, suppose TEXT is "foo"
+   and we want to complete to "foobar".  If WORD is "oo", return
+   "oobar"; if WORD is "baz/foo", return "baz/foobar".  */
+
+char **
+complete_on_enum (enumlist, text, word)
+     char **enumlist;
+     char *text;
+     char *word;
+{
+  char **matchlist;
+  int sizeof_matchlist;
+  int matches;
+  int textlen = strlen (text);
+  int i;
+  char *name;
+
+  sizeof_matchlist = 10;
+  matchlist = (char **) xmalloc (sizeof_matchlist * sizeof (char *));
+  matches = 0;
+
+  for (i = 0; (name = enumlist[i]) != NULL; i++)
+    if (strncmp (name, text, textlen) == 0)
+      {
+	if (matches == sizeof_matchlist)
+	  {
+	    sizeof_matchlist *= 2;
+	    matchlist = (char **) xrealloc ((char *)matchlist,
+					    (sizeof_matchlist
+					     * sizeof (char *)));
+	  }
+
+	matchlist[matches] = (char *) 
+	  xmalloc (strlen (word) + strlen (name) + 1);
+	if (word == text)
+	  strcpy (matchlist[matches], name);
+	else if (word > text)
+	  {
+	    /* Return some portion of name.  */
+	    strcpy (matchlist[matches], name + (word - text));
+	  }
+	else
+	  {
+	    /* Return some of text plus name.  */
+	    strncpy (matchlist[matches], word, text - word);
+	    matchlist[matches][text - word] = '\0';
+	    strcat (matchlist[matches], name);
+	  }
+	++matches;
+      }
+
+  if (matches == 0)
+    {
+      free ((PTR)matchlist);
+      matchlist = 0;
+    }
+  else
+    {
+      matchlist = (char **) xrealloc ((char *)matchlist, ((matches + 1)
+						* sizeof (char *)));
+      matchlist[matches] = (char *) 0;
+    }
+
+  return matchlist;
+}
+
+static int
+parse_binary_operation (arg)
+     char *arg;
+{
+  int length;
+
+  if (!arg || !*arg)
+    return 1;
+
+  length = strlen (arg);
+
+  while (arg[length - 1] == ' ' || arg[length - 1] == '\t')
+    length--;
+
+  if (!strncmp (arg, "on", length)
+      || !strncmp (arg, "1", length)
+      || !strncmp (arg, "yes", length))
+    return 1;
+  else
+    if (!strncmp (arg, "off", length)
+	|| !strncmp (arg, "0", length)
+	|| !strncmp (arg, "no", length))
+      return 0;
+    else 
+      {
+	error ("\"on\" or \"off\" expected.");
+	return 0;
+      }
+}
+
+/* Do a "set" or "show" command.  ARG is NULL if no argument, or the text
+   of the argument, and FROM_TTY is nonzero if this command is being entered
+   directly by the user (i.e. these are just like any other
+   command).  C is the command list element for the command.  */
+void
+do_setshow_command (arg, from_tty, c)
+     char *arg;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (c->type == set_cmd)
+    {
+      switch (c->var_type)
+	{
+	case var_string:
+	  {
+	    char *new;
+	    char *p;
+	    char *q;
+	    int ch;
+	    
+	    if (arg == NULL)
+	      arg = "";
+	    new = (char *) xmalloc (strlen (arg) + 2);
+	    p = arg; q = new;
+	    while ((ch = *p++) != '\000')
+	      {
+		if (ch == '\\')
+		  {
+		    /* \ at end of argument is used after spaces
+		       so they won't be lost.  */
+		    /* This is obsolete now that we no longer strip
+		       trailing whitespace and actually, the backslash
+		       didn't get here in my test, readline or
+		       something did something funky with a backslash
+		       right before a newline.  */
+		    if (*p == 0)
+		      break;
+		    ch = parse_escape (&p);
+		    if (ch == 0)
+		      break; /* C loses */
+		    else if (ch > 0)
+		      *q++ = ch;
+		  }
+		else
+		  *q++ = ch;
+	      }
+#if 0
+	    if (*(p - 1) != '\\')
+	      *q++ = ' ';
+#endif
+	    *q++ = '\0';
+	    new = (char *) xrealloc (new, q - new);
+	    if (*(char **)c->var != NULL)
+	      free (*(char **)c->var);
+	    *(char **) c->var = new;
+	  }
+	  break;
+	case var_string_noescape:
+	  if (arg == NULL)
+	    arg = "";
+	  if (*(char **)c->var != NULL)
+	    free (*(char **)c->var);
+	  *(char **) c->var = savestring (arg, strlen (arg));
+	  break;
+	case var_filename:
+	  if (arg == NULL)
+	    error_no_arg ("filename to set it to.");
+	  if (*(char **)c->var != NULL)
+	    free (*(char **)c->var);
+	  *(char **)c->var = tilde_expand (arg);
+	  break;
+	case var_boolean:
+	  *(int *) c->var = parse_binary_operation (arg);
+	  break;
+	case var_uinteger:
+	  if (arg == NULL)
+	    error_no_arg ("integer to set it to.");
+	  *(unsigned int *) c->var = parse_and_eval_address (arg);
+	  if (*(unsigned int *) c->var == 0)
+	    *(unsigned int *) c->var = UINT_MAX;
+	  break;
+	case var_integer:
+	  {
+	    unsigned int val;
+	    if (arg == NULL)
+	      error_no_arg ("integer to set it to.");
+	    val = parse_and_eval_address (arg);
+	    if (val == 0)
+	      *(int *) c->var = INT_MAX;
+	    else if (val >= INT_MAX)
+	      error ("integer %u out of range", val);
+	    else
+	      *(int *) c->var = val;
+	    break;
+	  }
+	case var_zinteger:
+	  if (arg == NULL)
+	    error_no_arg ("integer to set it to.");
+	  *(int *) c->var = parse_and_eval_address (arg);
+	  break;
+	case var_enum:
+	  {
+	    int i;
+	    int len;
+	    int nmatches;
+	    char *match = NULL;
+	    char *p;
+
+	    /* if no argument was supplied, print an informative error message */
+	    if (arg == NULL)
+	      {
+		char msg[1024];
+		strcpy (msg, "Requires an argument. Valid arguments are ");
+		for (i = 0; c->enums[i]; i++)
+		  {
+		    if (i != 0)
+		      strcat (msg, ", ");
+		    strcat (msg, c->enums[i]);
+		  }
+		strcat (msg, ".");
+		error (msg);
+	      }
+
+	    p = strchr (arg, ' ');
+	    
+	    if (p)
+	      len = p - arg;
+	    else
+	      len = strlen (arg);
+
+	    nmatches = 0;
+	    for (i = 0; c->enums[i]; i++)
+	      if (strncmp (arg, c->enums[i], len) == 0)
+		{
+		  match = c->enums[i];
+		  nmatches++;
+		}
+
+	    if (nmatches <= 0)
+	      error ("Undefined item: \"%s\".", arg);
+
+	    if (nmatches > 1)
+	      error ("Ambiguous item \"%s\".", arg);
+
+	    *(char **)c->var = match;
+	  }
+	  break;
+	default:
+	  error ("gdb internal error: bad var_type in do_setshow_command");
+	}
+    }
+  else if (c->type == show_cmd)
+    {
+      /* Print doc minus "show" at start.  */
+      print_doc_line (gdb_stdout, c->doc + 5);
+      
+      fputs_filtered (" is ", gdb_stdout);
+      wrap_here ("    ");
+      switch (c->var_type)
+	{
+      case var_string:
+	{
+	  unsigned char *p;
+
+	  fputs_filtered ("\"", gdb_stdout);
+	  if (*(unsigned char **)c->var)
+	    for (p = *(unsigned char **) c->var; *p != '\0'; p++)
+	      gdb_printchar (*p, gdb_stdout, '"');
+	  fputs_filtered ("\"", gdb_stdout);
+	}
+	break;
+      case var_string_noescape:
+      case var_filename:
+      case var_enum:
+	fputs_filtered ("\"", gdb_stdout);
+	if (*(char **)c->var)
+	  fputs_filtered (*(char **) c->var, gdb_stdout);
+	fputs_filtered ("\"", gdb_stdout);
+	break;
+      case var_boolean:
+	fputs_filtered (*(int *) c->var ? "on" : "off", gdb_stdout);
+	break;
+      case var_uinteger:
+	if (*(unsigned int *) c->var == UINT_MAX) {
+	  fputs_filtered ("unlimited", gdb_stdout);
+	  break;
+	}
+	/* else fall through */
+      case var_zinteger:
+	fprintf_filtered (gdb_stdout, "%u", *(unsigned int *) c->var);
+	break;
+      case var_integer:
+	if (*(int *) c->var == INT_MAX)
+	  {
+	    fputs_filtered ("unlimited", gdb_stdout);
+	  }
+	else
+	  fprintf_filtered (gdb_stdout, "%d", *(int *) c->var);
+	break;
+	    
+      default:
+	error ("gdb internal error: bad var_type in do_setshow_command");
+      }
+      fputs_filtered (".\n", gdb_stdout);
+    }
+  else
+    error ("gdb internal error: bad cmd_type in do_setshow_command");
+  (*c->function.sfunc) (NULL, from_tty, c);
+}
+
+/* Show all the settings in a list of show commands.  */
+
+void
+cmd_show_list (list, from_tty, prefix)
+     struct cmd_list_element *list;
+     int from_tty;
+     char *prefix;
+{
+  for (; list != NULL; list = list->next) {
+    /* If we find a prefix, run its list, prefixing our output by its
+       prefix (with "show " skipped).  */
+    if (list->prefixlist && !list->abbrev_flag)
+      cmd_show_list (*list->prefixlist, from_tty, list->prefixname + 5);
+    if (list->type == show_cmd)
+      {
+	fputs_filtered (prefix, gdb_stdout);
+	fputs_filtered (list->name, gdb_stdout);
+	fputs_filtered (":  ", gdb_stdout);
+	do_setshow_command ((char *)NULL, from_tty, list);
+      }
+  }
+}
+
+/* ARGSUSED */
+static void
+shell_escape (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+#ifdef CANT_FORK
+  /* FIXME: what about errors (I don't know how GO32 system() handles
+     them)?  */
+  system (arg);
+#else /* Can fork.  */
+  int rc, status, pid;
+  char *p, *user_shell;
+
+  if ((user_shell = (char *) getenv ("SHELL")) == NULL)
+    user_shell = "/bin/sh";
+
+  /* Get the name of the shell for arg0 */
+  if ((p = strrchr (user_shell, '/')) == NULL)
+    p = user_shell;
+  else
+    p++;			/* Get past '/' */
+
+  if ((pid = fork()) == 0)
+    {
+      if (!arg)
+	execl (user_shell, p, 0);
+      else
+	execl (user_shell, p, "-c", arg, 0);
+
+      fprintf_unfiltered (gdb_stderr, "Cannot execute %s: %s\n", user_shell,
+			  safe_strerror (errno));
+      gdb_flush (gdb_stderr);
+      _exit (0177);
+    }
+
+  if (pid != -1)
+    while ((rc = wait (&status)) != pid && rc != -1)
+      ;
+  else
+    error ("Fork failed");
+#endif /* Can fork.  */
+}
+
+static void
+make_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  char *p;
+
+  if (arg == 0)
+    p = "make";
+  else
+    {
+      p = xmalloc (sizeof("make ") + strlen(arg));
+      strcpy (p, "make ");
+      strcpy (p + sizeof("make ")-1, arg);
+    }
+  
+  shell_escape (p, from_tty);
+}
+
+static void
+show_user_1 (c, stream)
+     struct cmd_list_element *c;
+     GDB_FILE *stream;
+{
+  register struct command_line *cmdlines;
+
+  cmdlines = c->user_commands;
+  if (!cmdlines)
+    return;
+  fputs_filtered ("User command ", stream);
+  fputs_filtered (c->name, stream);
+  fputs_filtered (":\n", stream);
+
+  while (cmdlines)
+    {
+      print_command_line (cmdlines, 4);
+      cmdlines = cmdlines->next;
+    }
+  fputs_filtered ("\n", stream);
+}
+
+/* ARGSUSED */
+static void
+show_user (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct cmd_list_element *c;
+  extern struct cmd_list_element *cmdlist;
+
+  if (args)
+    {
+      c = lookup_cmd (&args, cmdlist, "", 0, 1);
+      if (c->class != class_user)
+	error ("Not a user command.");
+      show_user_1 (c, gdb_stdout);
+    }
+  else
+    {
+      for (c = cmdlist; c; c = c->next)
+	{
+	  if (c->class == class_user)
+	    show_user_1 (c, gdb_stdout);
+	}
+    }
+}
+
+void
+_initialize_command ()
+{
+  add_com ("shell", class_support, shell_escape,
+	   "Execute the rest of the line as a shell command.  \n\
+With no arguments, run an inferior shell.");
+
+  if (xdb_commands)
+    add_com_alias("!", "shell", class_support, 0);
+
+  add_com ("make", class_support, make_command,
+	   "Run the ``make'' program using the rest of the line as arguments.");
+  add_cmd ("user", no_class, show_user, 
+	   "Show definitions of user defined commands.\n\
+Argument is the name of the user defined command.\n\
+With no argument, show definitions of all user defined commands.", &showlist);
+}
diff --git a/gdb/command.h b/gdb/command.h
new file mode 100644
index 0000000..5a20923
--- /dev/null
+++ b/gdb/command.h
@@ -0,0 +1,259 @@
+/* Header file for command-reading library command.c.
+   Copyright (C) 1986, 1989, 1990 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (COMMAND_H)
+#define COMMAND_H 1
+
+/* Not a set/show command.  Note that some commands which begin with
+   "set" or "show" might be in this category, if their syntax does
+   not fall into one of the following categories.  */
+typedef enum cmd_types {
+  not_set_cmd,
+  set_cmd,
+  show_cmd
+} cmd_types;
+
+/* Types of "set" or "show" command.  */
+typedef enum var_types {
+  /* "on" or "off".  *VAR is an integer which is nonzero for on,
+     zero for off.  */
+  var_boolean,
+  /* Unsigned Integer.  *VAR is an unsigned int.  The user can type 0
+     to mean "unlimited", which is stored in *VAR as UINT_MAX.  */
+  var_uinteger,
+
+  /* Like var_uinteger but signed.  *VAR is an int.  The user can type 0
+     to mean "unlimited", which is stored in *VAR as INT_MAX.  */
+  var_integer,
+
+  /* String which the user enters with escapes (e.g. the user types \n and
+     it is a real newline in the stored string).
+     *VAR is a malloc'd string, or NULL if the string is empty.  */
+  var_string,
+  /* String which stores what the user types verbatim.
+     *VAR is a malloc'd string, or NULL if the string is empty.  */
+  var_string_noescape,
+  /* String which stores a filename.
+     *VAR is a malloc'd string, or NULL if the string is empty.  */
+  var_filename,
+  /* ZeroableInteger.  *VAR is an int.  Like Unsigned Integer except
+     that zero really means zero.  */
+  var_zinteger,
+  /* Enumerated type.  Can only have one of the specified values.  *VAR is a
+     char pointer to the name of the element that we find.  */
+  var_enum
+} var_types;
+
+/* This structure records one command'd definition.  */
+
+struct cmd_list_element
+  {
+    /* Points to next command in this list.  */
+    struct cmd_list_element *next;
+
+    /* Name of this command.  */
+    char *name;
+
+    /* Command class; class values are chosen by application program.  */
+    enum command_class class;
+
+    /* Function definition of this command.
+       NO_FUNCTION for command class names and for help topics that
+       are not really commands.  */
+    union
+      {
+	/* If type is not_set_cmd, call it like this:  */
+	void (*cfunc) PARAMS ((char *args, int from_tty));
+
+	/* If type is cmd_set or show_cmd, first set the variables, and
+	   then call this.  */
+	void (*sfunc) PARAMS ((char *args, int from_tty,
+			       struct cmd_list_element *c));
+      } function;
+#   define NO_FUNCTION ((void (*) PARAMS((char *args, int from_tty))) 0)
+
+    /* Documentation of this command (or help topic).
+       First line is brief documentation; remaining lines form, with it,
+       the full documentation.  First line should end with a period.
+       Entire string should also end with a period, not a newline.  */
+    char *doc;
+
+    /* Hook for another command to be executed before this command.  */
+    struct cmd_list_element *hook;
+
+    /* Nonzero identifies a prefix command.  For them, the address
+       of the variable containing the list of subcommands.  */
+    struct cmd_list_element **prefixlist;
+
+    /* For prefix commands only:
+       String containing prefix commands to get here: this one
+       plus any others needed to get to it.  Should end in a space.
+       It is used before the word "command" in describing the
+       commands reached through this prefix.  */
+    char *prefixname;
+
+    /* For prefix commands only:
+       nonzero means do not get an error if subcommand is not
+       recognized; call the prefix's own function in that case.  */
+    char allow_unknown;
+
+    /* Nonzero says this is an abbreviation, and should not
+       be mentioned in lists of commands.
+       This allows "br<tab>" to complete to "break", which it
+       otherwise wouldn't.  */
+    char abbrev_flag;
+
+    /* Completion routine for this command.  TEXT is the text beyond
+       what was matched for the command itself (leading whitespace is
+       skipped).  It stops where we are supposed to stop completing
+       (rl_point) and is '\0' terminated.
+
+       Return value is a malloc'd vector of pointers to possible completions
+       terminated with NULL.  If there are no completions, returning a pointer
+       to a NULL would work but returning NULL itself is also valid.
+       WORD points in the same buffer as TEXT, and completions should be
+       returned relative to this position.  For example, suppose TEXT is "foo"
+       and we want to complete to "foobar".  If WORD is "oo", return
+       "oobar"; if WORD is "baz/foo", return "baz/foobar".  */
+    char ** (*completer) PARAMS ((char *text, char *word));
+
+    /* Type of "set" or "show" command (or SET_NOT_SET if not "set"
+       or "show").  */
+    cmd_types type;
+
+    /* Pointer to variable affected by "set" and "show".  Doesn't matter
+       if type is not_set.  */
+    char *var;
+
+    /* What kind of variable is *VAR?  */
+    var_types var_type;
+
+    /* Pointer to NULL terminated list of enumerated values (like argv).  */
+    char **enums;
+
+    /* Pointer to command strings of user-defined commands */
+    struct command_line *user_commands;
+
+    /* Pointer to command that is hooked by this one,
+       so the hook can be removed when this one is deleted.  */
+    struct cmd_list_element *hookee;
+
+    /* Pointer to command that is aliased by this one, so the
+       aliased command can be located in case it has been hooked.  */
+    struct cmd_list_element *cmd_pointer;
+  };
+
+/* Forward-declarations of the entry-points of command.c.  */
+
+extern struct cmd_list_element *
+add_cmd PARAMS ((char *, enum command_class, void (*fun) (char *, int),
+		 char *, struct cmd_list_element **));
+
+extern struct cmd_list_element *
+add_alias_cmd PARAMS ((char *, char *, enum command_class, int,
+		       struct cmd_list_element **));
+
+extern struct cmd_list_element *
+add_prefix_cmd PARAMS ((char *, enum command_class, void (*fun) (char *, int),
+			char *, struct cmd_list_element **, char *, int,
+			struct cmd_list_element **));
+
+extern struct cmd_list_element *
+add_abbrev_prefix_cmd PARAMS ((char *, enum command_class,
+			       void (*fun) (char *, int), char *,
+			       struct cmd_list_element **, char *, int,
+			       struct cmd_list_element **));
+
+extern struct cmd_list_element *
+lookup_cmd PARAMS ((char **, struct cmd_list_element *, char *, int, int));
+
+extern struct cmd_list_element *
+lookup_cmd_1 PARAMS ((char **, struct cmd_list_element *,
+		      struct cmd_list_element **, int));
+
+extern void
+add_com PARAMS ((char *, enum command_class, void (*fun)(char *, int),
+		 char *));
+
+extern void
+add_com_alias PARAMS ((char *, char *, enum command_class, int));
+
+extern void
+add_info PARAMS ((char *, void (*fun) (char *, int), char *));
+
+extern void
+add_info_alias PARAMS ((char *, char *, int));
+
+extern char **
+complete_on_cmdlist PARAMS ((struct cmd_list_element *, char *, char *));
+
+extern char **
+complete_on_enum PARAMS ((char **enumlist, char *, char *));
+
+extern void
+delete_cmd PARAMS ((char *, struct cmd_list_element **));
+
+extern void
+help_cmd PARAMS ((char *, GDB_FILE *));
+
+extern void
+help_list PARAMS ((struct cmd_list_element *, char *, enum command_class,
+		   GDB_FILE *));
+
+extern void
+help_cmd_list PARAMS ((struct cmd_list_element *, enum command_class, char *,
+		       int, GDB_FILE *));
+
+extern struct cmd_list_element *
+add_set_cmd PARAMS ((char *, enum command_class, var_types, char *, char *,
+		     struct cmd_list_element **));
+
+extern struct cmd_list_element *
+add_set_enum_cmd PARAMS ((char *name, enum command_class, char *list[],
+			  char *var, char *doc, struct cmd_list_element **c));
+
+extern struct cmd_list_element *
+add_show_from_set PARAMS ((struct cmd_list_element *,
+			   struct cmd_list_element **));
+
+/* Do a "set" or "show" command.  ARG is NULL if no argument, or the text
+   of the argument, and FROM_TTY is nonzero if this command is being entered
+   directly by the user (i.e. these are just like any other
+   command).  C is the command list element for the command.  */
+
+extern void
+do_setshow_command PARAMS ((char *, int, struct cmd_list_element *));
+
+/* Do a "show" command for each thing on a command list.  */
+
+extern void
+cmd_show_list PARAMS ((struct cmd_list_element *, int, char *));
+
+extern void
+error_no_arg PARAMS ((char *));
+
+extern void
+dont_repeat PARAMS ((void));
+
+/* Used to mark commands that don't do anything.  If we just leave the
+   function field NULL, the command is interpreted as a help topic, or
+   as a class of commands.  */
+
+extern void
+not_just_help_class_command PARAMS ((char *, int));
+
+#endif /* !defined (COMMAND_H) */
diff --git a/gdb/complaints.c b/gdb/complaints.c
new file mode 100644
index 0000000..e38038d
--- /dev/null
+++ b/gdb/complaints.c
@@ -0,0 +1,166 @@
+/* Support for complaint handling during symbol reading in GDB.
+   Copyright (C) 1990, 1991, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "complaints.h"
+#include "gdbcmd.h"
+
+/* Structure to manage complaints about symbol file contents.  */
+
+struct complaint complaint_root[1] = {
+  {
+    (char *) NULL,	/* Complaint message */
+    0,			/* Complaint counter */
+    complaint_root	/* Next complaint. */
+  }
+};
+
+/* How many complaints about a particular thing should be printed before
+   we stop whining about it?  Default is no whining at all, since so many
+   systems have ill-constructed symbol files.  */
+
+static unsigned int stop_whining = 0;
+
+/* Should each complaint be self explanatory, or should we assume that
+   a series of complaints is being produced? 
+   case 0:  self explanatory message.
+   case 1:  First message of a series that must start off with explanation.
+   case 2:  Subsequent message, when user already knows we are reading
+            symbols and we can just state our piece.  */
+
+static int complaint_series = 0;
+
+/* External variables and functions referenced. */
+
+extern int info_verbose;
+
+
+/* Functions to handle complaints during symbol reading.  */
+
+/* Print a complaint about the input symbols, and link the complaint block
+   into a chain for later handling.  */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+complain (struct complaint *complaint, ...)
+#else
+complain (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, complaint);
+#else
+  struct complaint *complaint;
+
+  va_start (args);
+  complaint = va_arg (args, struct complaint *);
+#endif
+
+  complaint -> counter++;
+  if (complaint -> next == NULL)
+    {
+      complaint -> next = complaint_root -> next;
+      complaint_root -> next = complaint;
+    }
+  if (complaint -> counter > stop_whining)
+    {
+      return;
+    }
+  wrap_here ("");
+
+  switch (complaint_series + (info_verbose << 1))
+    {
+
+      /* Isolated messages, must be self-explanatory.  */
+      case 0:
+        begin_line ();
+        puts_filtered ("During symbol reading, ");
+	wrap_here ("");
+	vprintf_filtered (complaint -> message, args);
+	puts_filtered (".\n");
+	break;
+
+      /* First of a series, without `set verbose'.  */
+      case 1:
+        begin_line ();
+	puts_filtered ("During symbol reading...");
+	vprintf_filtered (complaint -> message, args);
+	puts_filtered ("...");
+	wrap_here ("");
+	complaint_series++;
+	break;
+
+      /* Subsequent messages of a series, or messages under `set verbose'.
+	 (We'll already have produced a "Reading in symbols for XXX..."
+	 message and will clean up at the end with a newline.)  */
+      default:
+	vprintf_filtered (complaint -> message, args);
+	puts_filtered ("...");
+	wrap_here ("");
+    }
+  /* If GDB dumps core, we'd like to see the complaints first.  Presumably
+     GDB will not be sending so many complaints that this becomes a
+     performance hog.  */
+  gdb_flush (gdb_stdout);
+  va_end (args);
+}
+
+/* Clear out all complaint counters that have ever been incremented.
+   If sym_reading is 1, be less verbose about successive complaints,
+   since the messages are appearing all together during a command that
+   reads symbols (rather than scattered around as psymtabs get fleshed
+   out into symtabs at random times).  If noisy is 1, we are in a
+   noisy symbol reading command, and our caller will print enough
+   context for the user to figure it out.  */
+
+void
+clear_complaints (sym_reading, noisy)
+     int sym_reading;
+     int noisy;
+{
+  struct complaint *p;
+
+  for (p = complaint_root -> next; p != complaint_root; p = p -> next)
+    {
+      p -> counter = 0;
+    }
+
+  if (!sym_reading && !noisy && complaint_series > 1)
+    {
+      /* Terminate previous series, since caller won't.  */
+      puts_filtered ("\n");
+    }
+
+  complaint_series = sym_reading ? 1 + noisy : 0;
+}
+
+void
+_initialize_complaints ()
+{
+  add_show_from_set
+    (add_set_cmd ("complaints", class_support, var_zinteger,
+		  (char *) &stop_whining,
+		  "Set max number of complaints about incorrect symbols.",
+		  &setlist),
+     &showlist);
+
+}
diff --git a/gdb/complaints.h b/gdb/complaints.h
new file mode 100644
index 0000000..4b9b5de
--- /dev/null
+++ b/gdb/complaints.h
@@ -0,0 +1,53 @@
+/* Definitions for complaint handling during symbol reading in GDB.
+   Copyright (C) 1990, 1991, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#if !defined (COMPLAINTS_H)
+#define COMPLAINTS_H
+
+
+/* Support for complaining about things in the symbol file that aren't
+   catastrophic.
+
+   Each such thing gets a counter.  The first time we have the problem,
+   during a symbol read, we report it.  At the end of symbol reading,
+   if verbose, we report how many of each problem we had.  */
+
+struct complaint
+{
+  char *message;
+  unsigned counter;
+  struct complaint *next;
+};
+
+/* Root of the chain of complaints that have at some point been issued. 
+   This is used to reset the counters, and/or report the total counts.  */
+
+extern struct complaint complaint_root[1];
+
+/* Functions that handle complaints.  (in complaints.c)  */
+
+extern void
+complain PARAMS ((struct complaint *, ...));
+
+extern void
+clear_complaints PARAMS ((int, int));
+
+
+#endif	/* !defined (COMPLAINTS_H) */
diff --git a/gdb/config.in b/gdb/config.in
new file mode 100644
index 0000000..d6bfe94
--- /dev/null
+++ b/gdb/config.in
@@ -0,0 +1,325 @@
+/* config.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Whether malloc must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_MALLOC
+
+/* Whether realloc must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_REALLOC
+
+/* Whether free must be declared even if <stdlib.h> is included.  */
+#undef NEED_DECLARATION_FREE
+
+/* Whether strerror must be declared even if <string.h> is included.  */
+#undef NEED_DECLARATION_STRERROR
+
+/* Define if on AIX 3.
+   System headers sometimes define this.
+   We just want to avoid a redefinition error message.  */
+#ifndef _ALL_SOURCE
+#undef _ALL_SOURCE
+#endif
+
+/* Define if using alloca.c.  */
+#undef C_ALLOCA
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+#undef HAVE_ALLOCA_H
+
+/* Define if the `long double' type works.  */
+#undef HAVE_LONG_DOUBLE
+
+/* Define if you have a working `mmap' system call.  */
+#undef HAVE_MMAP
+
+/* Define as __inline if that's what the C compiler calls it.  */
+#undef inline
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef off_t
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define to `unsigned' if <sys/types.h> doesn't define.  */
+#undef size_t
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if the `S_IS*' macros in <sys/stat.h> do not work properly.  */
+#undef STAT_MACROS_BROKEN
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Define if ioctl argument PIOCSET is available. */
+#undef HAVE_PROCFS_PIOCSET
+
+/* /proc PID entries are directories containing the files
+   ctl as map status */
+#undef HAVE_MULTIPLE_PROC_FDS
+
+/* Define if the `long long' type works.  */
+#undef CC_HAS_LONG_LONG
+
+/* Define if the "ll" format works to print long long ints. */
+#undef PRINTF_HAS_LONG_LONG
+
+/* Define if the "%Lg" format works to print long doubles. */
+#undef PRINTF_HAS_LONG_DOUBLE
+
+/* Define if the "%Lg" format works to scan long doubles. */
+#undef SCANF_HAS_LONG_DOUBLE
+
+/* Define if using Solaris thread debugging.  */
+#undef HAVE_THREAD_DB_LIB
+
+/* Define on a GNU/Linux system to work around problems in sys/procfs.h.  */
+#undef START_INFERIOR_TRAPS_EXPECTED
+#undef sys_quotactl
+
+/* Define if you have HPUX threads */
+#undef HAVE_HPUX_THREAD_SUPPORT
+
+/* Define if you want to use the memory mapped malloc package (mmalloc). */
+#undef USE_MMALLOC
+
+/* Define if the runtime uses a routine from mmalloc before gdb has a chance
+   to initialize mmalloc, and we want to force checking to be used anyway.
+   This may cause spurious memory corruption messages if the runtime tries
+   to explicitly deallocate that memory when gdb calls exit. */
+#undef MMCHECK_FORCE
+
+/* Define if you want to use the full-screen terminal user interface.  */
+#undef TUI
+
+/* Define if <proc_service.h> on solaris uses int instead of
+   size_t, and assorted other type changes. */
+#undef PROC_SERVICE_IS_OLD
+
+/* Set to true if the save_state_t structure is present */
+#define HAVE_STRUCT_SAVE_STATE_T 0
+
+/* Set to true if the save_state_t structure has the ss_wide member */
+#define HAVE_STRUCT_MEMBER_SS_WIDE 0
+
+/* Define if you have the __argz_count function.  */
+#undef HAVE___ARGZ_COUNT
+
+/* Define if you have the __argz_next function.  */
+#undef HAVE___ARGZ_NEXT
+
+/* Define if you have the __argz_stringify function.  */
+#undef HAVE___ARGZ_STRINGIFY
+
+/* Define if you have the bcopy function.  */
+#undef HAVE_BCOPY
+
+/* Define if you have the btowc function.  */
+#undef HAVE_BTOWC
+
+/* Define if you have the bzero function.  */
+#undef HAVE_BZERO
+
+/* Define if you have the dcgettext function.  */
+#undef HAVE_DCGETTEXT
+
+/* Define if you have the getcwd function.  */
+#undef HAVE_GETCWD
+
+/* Define if you have the getpagesize function.  */
+#undef HAVE_GETPAGESIZE
+
+/* Define if you have the isascii function.  */
+#undef HAVE_ISASCII
+
+/* Define if you have the munmap function.  */
+#undef HAVE_MUNMAP
+
+/* Define if you have the putenv function.  */
+#undef HAVE_PUTENV
+
+/* Define if you have the sbrk function.  */
+#undef HAVE_SBRK
+
+/* Define if you have the setenv function.  */
+#undef HAVE_SETENV
+
+/* Define if you have the setlocale function.  */
+#undef HAVE_SETLOCALE
+
+/* Define if you have the setpgid function.  */
+#undef HAVE_SETPGID
+
+/* Define if you have the sigaction function.  */
+#undef HAVE_SIGACTION
+
+/* Define if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if you have the strcasecmp function.  */
+#undef HAVE_STRCASECMP
+
+/* Define if you have the strchr function.  */
+#undef HAVE_STRCHR
+
+/* Define if you have the <argz.h> header file.  */
+#undef HAVE_ARGZ_H
+
+/* Define if you have the <asm/debugreg.h> header file.  */
+#undef HAVE_ASM_DEBUGREG_H
+
+/* Define if you have the <ctype.h> header file.  */
+#undef HAVE_CTYPE_H
+
+/* Define if you have the <curses.h> header file.  */
+#undef HAVE_CURSES_H
+
+/* Define if you have the <endian.h> header file.  */
+#undef HAVE_ENDIAN_H
+
+/* Define if you have the <limits.h> header file.  */
+#undef HAVE_LIMITS_H
+
+/* Define if you have the <link.h> header file.  */
+#undef HAVE_LINK_H
+
+/* Define if you have the <locale.h> header file.  */
+#undef HAVE_LOCALE_H
+
+/* Define if you have the <malloc.h> header file.  */
+#undef HAVE_MALLOC_H
+
+/* Define if you have the <memory.h> header file.  */
+#undef HAVE_MEMORY_H
+
+/* Define if you have the <nl_types.h> header file.  */
+#undef HAVE_NL_TYPES_H
+
+/* Define if you have the <objlist.h> header file.  */
+#undef HAVE_OBJLIST_H
+
+/* Define if you have the <ptrace.h> header file.  */
+#undef HAVE_PTRACE_H
+
+/* Define if you have the <sgtty.h> header file.  */
+#undef HAVE_SGTTY_H
+
+/* Define if you have the <stddef.h> header file.  */
+#undef HAVE_STDDEF_H
+
+/* Define if you have the <stdlib.h> header file.  */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <sys/debugreg.h> header file.  */
+#undef HAVE_SYS_DEBUGREG_H
+
+/* Define if you have the <sys/param.h> header file.  */
+#undef HAVE_SYS_PARAM_H
+
+/* Define if you have the <sys/procfs.h> header file.  */
+#undef HAVE_SYS_PROCFS_H
+
+/* Define if you have the <sys/ptrace.h> header file.  */
+#undef HAVE_SYS_PTRACE_H
+
+/* Define if you have the <sys/reg.h> header file.  */
+#undef HAVE_SYS_REG_H
+
+/* Define if you have the <sys/wait.h> header file.  */
+#undef HAVE_SYS_WAIT_H
+
+/* Define if you have the <term.h> header file.  */
+#undef HAVE_TERM_H
+
+/* Define if you have the <termio.h> header file.  */
+#undef HAVE_TERMIO_H
+
+/* Define if you have the <termios.h> header file.  */
+#undef HAVE_TERMIOS_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <values.h> header file.  */
+#undef HAVE_VALUES_H
+
+/* Define if you have the <wait.h> header file.  */
+#undef HAVE_WAIT_H
+
+/* Define if you have the <wchar.h> header file.  */
+#undef HAVE_WCHAR_H
+
+/* Define if you have the <wctype.h> header file.  */
+#undef HAVE_WCTYPE_H
+
+/* Define if you have the dl library (-ldl).  */
+#undef HAVE_LIBDL
+
+/* Define if you have the m library (-lm).  */
+#undef HAVE_LIBM
+
+/* Define if you have the w library (-lw).  */
+#undef HAVE_LIBW
+
+/* Define if you have the stpcpy function */
+#undef HAVE_STPCPY
+
+/* Define if your locale.h file contains LC_MESSAGES. */
+#undef HAVE_LC_MESSAGES
+
+/* Define to 1 if NLS is requested */
+#undef ENABLE_NLS
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext. */
+#undef HAVE_GETTEXT
+
+/* Define if malloc is not declared in system header files. */
+#undef NEED_DECLARATION_MALLOC
+
+/* Define if realloc is not declared in system header files. */
+#undef NEED_DECLARATION_REALLOC
+
+/* Define if free is not declared in system header files. */
+#undef NEED_DECLARATION_FREE
+
+/* Define if strerror is not declared in system header files. */
+#undef NEED_DECLARATION_STRERROR
+
+/* Define if strdup is not declared in system header files. */
+#undef NEED_DECLARATION_STRDUP
+
+/* Define if <sys/procfs.h> has pstatus_t. */
+#undef HAVE_PSTATUS_T
+
+/* Define if <sys/procfs.h> has prrun_t. */
+#undef HAVE_PRRUN_T
+
+/* Define if <sys/procfs.h> has gregset_t. */
+#undef HAVE_GREGSET_T
+
+/* Define if <sys/procfs.h> has fpregset_t. */
+#undef HAVE_FPREGSET_T
+
diff --git a/gdb/config/a29k/a29k-kern.mt b/gdb/config/a29k/a29k-kern.mt
new file mode 100644
index 0000000..f1a2e52
--- /dev/null
+++ b/gdb/config/a29k/a29k-kern.mt
@@ -0,0 +1,13 @@
+# Target: Remote AMD 29000 that runs Unix kernel on NYU Ultra3 processor board
+
+# This builds a gdb that should run on a host (we use sun3os4) that
+# then communicates over the serial line to either an Adapt or MiniMon,
+# for use in debugging Unix kernels.
+# As compared to ordinary remote 29K debugging, this changes the register
+# numbering a bit, to hold kernel regs, and adds support for looking at
+# the upage.
+
+TDEPFILES= a29k-tdep.o remote-mm.o remote-adapt.o
+TM_FILE= tm-ultra3.h
+
+MT_CFLAGS = -DKERNEL_DEBUGGING -DNO_HIF_SUPPORT
diff --git a/gdb/config/a29k/a29k-udi.mt b/gdb/config/a29k/a29k-udi.mt
new file mode 100644
index 0000000..15b33e6
--- /dev/null
+++ b/gdb/config/a29k/a29k-udi.mt
@@ -0,0 +1,5 @@
+# Target: AMD 29000 on EB29K board over a serial line
+TDEPFILES= a29k-tdep.o remote-udi.o udip2soc.o udr.o udi2go32.o
+TM_FILE= tm-a29k.h
+
+MT_CFLAGS = $(HOST_IPC)
diff --git a/gdb/config/a29k/a29k.mt b/gdb/config/a29k/a29k.mt
new file mode 100644
index 0000000..a3f5910
--- /dev/null
+++ b/gdb/config/a29k/a29k.mt
@@ -0,0 +1,5 @@
+# Target: AMD 29000
+TDEPFILES= a29k-tdep.o remote-eb.o remote-adapt.o
+TM_FILE= tm-a29k.h
+
+MT_CFLAGS = -DNO_HIF_SUPPORT
diff --git a/gdb/config/a29k/nm-ultra3.h b/gdb/config/a29k/nm-ultra3.h
new file mode 100644
index 0000000..a3bc474
--- /dev/null
+++ b/gdb/config/a29k/nm-ultra3.h
@@ -0,0 +1,26 @@
+/* Host definitions for GDB running on an a29k NYU Ultracomputer
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by David Wood (wood@lab.ultra.nyu.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* If we ever *do* end up using the standard fetch_inferior_registers,
+   this is the right value for U_REGS_OFFSET.  */
+#define	U_REGS_OFFSET	0
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
diff --git a/gdb/config/a29k/tm-a29k.h b/gdb/config/a29k/tm-a29k.h
new file mode 100644
index 0000000..4892ec5
--- /dev/null
+++ b/gdb/config/a29k/tm-a29k.h
@@ -0,0 +1,707 @@
+/* Parameters for target machine AMD 29000, for GDB, the GNU debugger.
+   Copyright 1990, 1991, 1993, 1994 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Jim Kingdon.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parameters for an EB29K (a board which plugs into a PC and is
+   accessed through EBMON software running on the PC, which we
+   use as we'd use a remote stub (see remote-eb.c).
+
+   If gdb is ported to other a29k machines/systems, the
+   machine/system-specific parts should be removed from this file (a
+   la tm-m68k.h).  */
+
+/* Byte order is configurable, but this machine runs big-endian.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Floating point uses IEEE representations.  */
+#define IEEE_FLOAT
+
+/* Recognize our magic number.  */
+#define BADMAG(x) ((x).f_magic != 0572)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc) \
+  { pc = skip_prologue (pc); }
+CORE_ADDR skip_prologue ();
+
+/* Immediately after a function call, return the saved pc.
+   Can't go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) ((frame->flags & TRANSPARENT_FRAME) \
+				    ? read_register (TPC_REGNUM) \
+				    : read_register (LR0_REGNUM))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Stack must be aligned on 32-bit boundaries when synthesizing
+   function calls. */
+
+#define STACK_ALIGN(ADDR) (((ADDR) + 3) & ~3)
+
+/* Sequence of bytes for breakpoint instruction.  */
+/* ASNEQ 0x50, gr1, gr1
+   The trap number 0x50 is chosen arbitrarily.
+   We let the command line (or previously included files) override this
+   setting.  */
+#ifndef BREAKPOINT
+#if TARGET_BYTE_ORDER == BIG_ENDIAN
+#define BREAKPOINT {0x72, 0x50, 0x01, 0x01}
+#else /* Target is little-endian.  */
+#define BREAKPOINT {0x01, 0x01, 0x50, 0x72}
+#endif /* Target is little-endian.  */
+#endif /* BREAKPOINT */
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Allow the register declarations here to be overridden for remote
+   kernel debugging.  */
+#if !defined (REGISTER_NAMES)
+
+/* Number of machine registers */
+
+#define NUM_REGS 205
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.
+
+   FIXME, add floating point registers and support here.
+
+   Also note that this list does not attempt to deal with kernel
+   debugging (in which the first 32 registers are gr64-gr95).  */
+
+#define REGISTER_NAMES \
+{"gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \
+ "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \
+ "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \
+ "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127",		 \
+ "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9",   \
+ "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \
+ "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \
+ "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \
+ "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \
+ "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \
+ "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \
+ "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \
+ "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \
+ "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \
+ "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \
+ "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \
+ "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \
+ "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \
+ "lr124", "lr125", "lr126", "lr127",					 \
+  "AI0", "AI1", "AI2", "AI3", "AI4", "AI5", "AI6", "AI7", "AI8", "AI9",  \
+  "AI10", "AI11", "AI12", "AI13", "AI14", "AI15", "FP",			 \
+  "bp", "fc", "cr", "q",						 \
+  "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr",	 \
+  "pc0", "pc1", "pc2", "mmu", "lru", "fpe", "inte", "fps", "exo", "gr1",  \
+  "alu", "ipc", "ipa", "ipb" }
+
+/*
+ * Converts an sdb register number to an internal gdb register number.
+ * Currently under epi, gr96->0...gr127->31...lr0->32...lr127->159, or...
+ * 		  	gr64->0...gr95->31, lr0->32...lr127->159.
+ */
+#define SDB_REG_TO_REGNUM(value) \
+  (((value) >= 96 && (value) <= 127) ? ((value) - 96) : \
+   ((value) >= 128 && (value) <=  255) ? ((value) - 128 + LR0_REGNUM) : \
+   (value))
+
+/*
+ * Provide the processor register numbers of some registers that are
+ * expected/written in instructions that might change under different
+ * register sets.  Namely, gcc can compile (-mkernel-registers) so that
+ * it uses gr64-gr95 in stead of gr96-gr127.
+ */
+#define MSP_HW_REGNUM	125		/* gr125 */
+#define RAB_HW_REGNUM	126		/* gr126 */
+
+/* Convert Processor Special register #x to REGISTER_NAMES register # */
+#define SR_REGNUM(x) \
+  ((x) < 15  ? VAB_REGNUM + (x)					 \
+   : (x) >= 128 && (x) < 131 ? IPC_REGNUM + (x) - 128		 \
+   : (x) == 131 ? Q_REGNUM					 \
+   : (x) == 132 ? ALU_REGNUM					 \
+   : (x) >= 133 && (x) < 136 ? BP_REGNUM + (x) - 133		 \
+   : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x) - 160		 \
+   : (x) == 164 ? EXO_REGNUM                                     \
+   : (error ("Internal error in SR_REGNUM"), 0))
+#define GR96_REGNUM 0
+
+/* Define the return register separately, so it can be overridden for
+   kernel procedure calling conventions. */
+#define	RETURN_REGNUM	GR96_REGNUM
+#define GR1_REGNUM 200
+/* This needs to be the memory stack pointer, not the register stack pointer,
+   to make call_function work right.  */
+#define SP_REGNUM MSP_REGNUM
+#define FP_REGNUM 33 /* lr1 */
+
+/* Return register for transparent calling convention (gr122).  */
+#define TPC_REGNUM (122 - 96 + GR96_REGNUM)
+
+/* Large Return Pointer (gr123).  */
+#define LRP_REGNUM (123 - 96 + GR96_REGNUM)
+
+/* Static link pointer (gr124).  */
+#define SLP_REGNUM (124 - 96 + GR96_REGNUM)
+
+/* Memory Stack Pointer (gr125).  */
+#define MSP_REGNUM (125 - 96 + GR96_REGNUM)
+
+/* Register allocate bound (gr126).  */
+#define RAB_REGNUM (126 - 96 + GR96_REGNUM)
+
+/* Register Free Bound (gr127).  */
+#define RFB_REGNUM (127 - 96 + GR96_REGNUM)
+
+/* Register Stack Pointer.  */
+#define RSP_REGNUM GR1_REGNUM
+#define LR0_REGNUM 32
+#define BP_REGNUM 177
+#define FC_REGNUM 178
+#define CR_REGNUM 179
+#define Q_REGNUM 180
+#define VAB_REGNUM 181
+#define OPS_REGNUM (VAB_REGNUM + 1)
+#define CPS_REGNUM (VAB_REGNUM + 2)
+#define CFG_REGNUM (VAB_REGNUM + 3)
+#define CHA_REGNUM (VAB_REGNUM + 4)
+#define CHD_REGNUM (VAB_REGNUM + 5)
+#define CHC_REGNUM (VAB_REGNUM + 6)
+#define RBP_REGNUM (VAB_REGNUM + 7)
+#define TMC_REGNUM (VAB_REGNUM + 8)
+#define TMR_REGNUM (VAB_REGNUM + 9)
+#define NPC_REGNUM (VAB_REGNUM + 10)  /* pc0 */
+#define PC_REGNUM  (VAB_REGNUM + 11)  /* pc1 */
+#define PC2_REGNUM (VAB_REGNUM + 12)
+#define MMU_REGNUM (VAB_REGNUM + 13)
+#define LRU_REGNUM (VAB_REGNUM + 14)
+#define FPE_REGNUM (VAB_REGNUM + 15)
+#define INTE_REGNUM (VAB_REGNUM + 16)
+#define FPS_REGNUM (VAB_REGNUM + 17)
+#define EXO_REGNUM (VAB_REGNUM + 18)
+/* gr1 is defined above as 200 = VAB_REGNUM + 19 */
+#define ALU_REGNUM (VAB_REGNUM + 20)
+#define PS_REGNUM  ALU_REGNUM
+#define IPC_REGNUM (VAB_REGNUM + 21)
+#define IPA_REGNUM (VAB_REGNUM + 22)
+#define IPB_REGNUM (VAB_REGNUM + 23)
+
+#endif	/* !defined(REGISTER_NAMES) */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+/* All regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) (4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+
+/* All regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE (4)
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE (4)
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  (((N) == PC_REGNUM || (N) == LRP_REGNUM || (N) == SLP_REGNUM         \
+    || (N) == MSP_REGNUM || (N) == RAB_REGNUM || (N) == RFB_REGNUM     \
+    || (N) == GR1_REGNUM || (N) == FP_REGNUM || (N) == LR0_REGNUM       \
+    || (N) == NPC_REGNUM || (N) == PC2_REGNUM)                           \
+   ? lookup_pointer_type (builtin_type_void) : builtin_type_int)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+/* On the a29k the LRP points to the part of the structure beyond the first
+   16 words.  */
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  write_register (LRP_REGNUM, (ADDR) + 16 * 4);
+
+/* Should call_function allocate stack space for a struct return?  */
+/* On the a29k objects over 16 words require the caller to allocate space.  */
+extern use_struct_convention_fn a29k_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) a29k_use_struct_convention (gcc_p, type)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF)	      \
+  {    	       	       	       	       	       	       	       	       	   \
+    int reg_length = TYPE_LENGTH (TYPE);				   \
+    if (reg_length > 16 * 4)						   \
+      {									   \
+	reg_length = 16 * 4;						   \
+	read_memory (*((int *)(REGBUF) + LRP_REGNUM), (VALBUF) + 16 * 4,   \
+		     TYPE_LENGTH (TYPE) - 16 * 4);			   \
+      }									   \
+    memcpy ((VALBUF), ((int *)(REGBUF))+RETURN_REGNUM, reg_length);	   \
+  }
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  {									  \
+    int reg_length = TYPE_LENGTH (TYPE);				  \
+    if (reg_length > 16 * 4)						  \
+      {									  \
+        reg_length = 16 * 4;						  \
+        write_memory (read_register (LRP_REGNUM),			  \
+		      (char *)(VALBUF) + 16 * 4,			  \
+		      TYPE_LENGTH (TYPE) - 16 * 4);			  \
+      }									  \
+    write_register_bytes (REGISTER_BYTE (RETURN_REGNUM), (char *)(VALBUF),  \
+			  TYPE_LENGTH (TYPE));				  \
+  }
+
+/* The a29k user's guide documents well what the stacks look like.
+   But what isn't so clear there is how this interracts with the
+   symbols, or with GDB.
+   In the following saved_msp, saved memory stack pointer (which functions
+   as a memory frame pointer), means either
+   a register containing the memory frame pointer or, in the case of
+   functions with fixed size memory frames (i.e. those who don't use
+   alloca()), the result of the calculation msp + msize.
+
+   LOC_ARG, LOC_LOCAL - For GCC, these are relative to saved_msp.
+     For high C, these are relative to msp (making alloca impossible).
+   LOC_REGISTER, LOC_REGPARM - The register number is the number at the
+     time the function is running (after the prologue), or in the case
+     of LOC_REGPARM, may be a register number in the range 160-175.
+
+   The compilers do things like store an argument into memory, and then put out
+   a LOC_ARG for it, or put it into global registers and put out a
+   LOC_REGPARM.  Thus is it important to execute the first line of
+   code (i.e. the line of the open brace, i.e. the prologue) of a function
+   before trying to print arguments or anything.
+
+   The following diagram attempts to depict what is going on in memory
+   (see also the _a29k user's guide_) and also how that interacts with
+   GDB frames.  We arbitrarily pick fci->frame to point the same place
+   as the register stack pointer; since we set it ourself in
+   INIT_EXTRA_FRAME_INFO, and access it only through the FRAME_*
+   macros, it doesn't really matter exactly how we
+   do it.  However, note that FRAME_FP is used in two ways in GDB:
+   (1) as a "magic cookie" which uniquely identifies frames (even over
+   calls to the inferior), (2) (in PC_IN_CALL_DUMMY [ON_STACK])
+   as the value of SP_REGNUM before the dummy frame was pushed.  These
+   two meanings would be incompatible for the a29k if we defined
+   CALL_DUMMY_LOCATION == ON_STACK (but we don't, so don't worry about it).
+   Also note that "lr1" below, while called a frame pointer
+   in the user's guide, has only one function:  To determine whether
+   registers need to be filled in the function epilogue.
+
+   Consider the code:
+              < call bar>
+       	loc1: . . .
+        bar:  sub gr1,gr1,rsize_b
+	      . . .
+	      add mfp,msp,0
+	      sub msp,msp,msize_b
+	      . . .
+	      < call foo >
+	loc2: . . .
+        foo:  sub gr1,gr1,rsize_f
+	      . . .
+	      add mfp,msp,0
+	      sub msp,msp,msize_f
+	      . . .
+        loc3: < suppose the inferior stops here >
+
+                   memory stack      register stack
+		   |           |     |____________|
+		   |           |     |____loc1____|
+	  +------->|___________|     |            |   ^
+	  |        | ^         |     |  locals_b  |   |
+	  |        | |         |     |____________|   |
+	  |        | |         |     |            |   | rsize_b
+	  |        | | msize_b |     | args_to_f  |   |
+	  |        | |         |     |____________|   |
+	  |        | |         |     |____lr1_____|   V
+	  |        | V         |     |____loc2____|<----------------+
+	  |   +--->|___________|<---------mfp     |   ^             |
+	  |   |    | ^         |     |  locals_f  |   |             |
+	  |   |    | | msize_f |     |____________|   |             |
+	  |   |    | |         |     |            |   | rsize_f     |
+	  |   |    | V         |     |   args     |   |             |
+	  |   |    |___________|<msp |____________|   |             |
+	  |   |                      |_____lr1____|   V             |
+	  |   |                      |___garbage__| <- gr1 <----+   |
+ 	  |   |                 		                |   |
+          |   |                 		                |   |
+	  |   |	       	       	     pc=loc3	                |   |
+	  |   |         		      	                |   |
+	  |   |         		      	                |   |
+	  |   |            frame cache	      	                |   |
+          |   |       |_________________|     	                |   |
+          |   |       |rsize=rsize_b    |     	                |   |
+          |   |       |msize=msize_b    |     	                |   |
+          +---|--------saved_msp        |     	                |   |
+              |       |frame------------------------------------|---+
+              |       |pc=loc2          |                       |
+              |       |_________________|                       |
+              |       |rsize=rsize_f    |                       |
+              |       |msize=msize_f    |                       |
+              +--------saved_msp        |                       |
+                      |frame------------------------------------+
+                      |pc=loc3          |
+                      |_________________|
+
+   So, is that sufficiently confusing?  Welcome to the 29000.
+   Notes:
+   * The frame for foo uses a memory frame pointer but the frame for
+     bar does not.  In the latter case the saved_msp is
+     computed by adding msize to the saved_msp of the
+     next frame.
+   * msize is in the frame cache only for high C's sake.  */
+
+void read_register_stack ();
+long read_register_stack_integer ();
+
+#define FRAME_INIT_SAVED_REGS(fi) /*no-op*/
+
+#define EXTRA_FRAME_INFO  \
+  CORE_ADDR saved_msp;    \
+  unsigned int rsize;     \
+  unsigned int msize;	  \
+  unsigned char flags;
+
+/* Bits for flags in EXTRA_FRAME_INFO */
+#define TRANSPARENT_FRAME	0x1	/* This is a transparent frame */
+#define MFP_USED		0x2	/* A memory frame pointer is used */
+
+/* Because INIT_FRAME_PC gets passed fromleaf, that's where we init
+   not only ->pc and ->frame, but all the extra stuff, when called from
+   get_prev_frame_info, that is.  */
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  init_extra_frame_info(fci)
+void init_extra_frame_info ();
+
+#define INIT_FRAME_PC(fromleaf, fci) init_frame_pc(fromleaf, fci)
+void init_frame_pc ();
+
+
+/* FRAME_CHAIN takes a FRAME
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+/* On the a29k, the nominal address of a frame is the address on the
+   register stack of the return address (the one next to the incoming
+   arguments, not down at the bottom so nominal address == stack pointer).
+
+   GDB expects "nominal address" to equal contents of FP_REGNUM,
+   at least when it comes time to create the innermost frame.
+   However, that doesn't work for us, so when creating the innermost
+   frame we set ->frame ourselves in INIT_EXTRA_FRAME_INFO.  */
+
+/* These are mostly dummies for the a29k because INIT_FRAME_PC
+   sets prev->frame instead.  */
+/* If rsize is zero, we must be at end of stack (or otherwise hosed).
+   If we don't check rsize, we loop forever if we see rsize == 0.  */
+#define FRAME_CHAIN(thisframe) \
+  ((thisframe)->rsize == 0 \
+   ? 0 \
+   : (thisframe)->frame + (thisframe)->rsize)
+
+/* Determine if the frame has a 'previous' and back-traceable frame. */
+#define FRAME_IS_UNCHAINED(frame)	((frame)->flags & TRANSPARENT_FRAME)
+
+/* Find the previous frame of a transparent routine.
+ * For now lets not try and trace through a transparent routine (we might 
+ * have to assume that all transparent routines are traps).
+ */
+#define FIND_PREV_UNCHAINED_FRAME(frame)	0
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+/* Saved pc (i.e. return address).  */
+#define FRAME_SAVED_PC(fraim) \
+  (read_register_stack_integer ((fraim)->frame + (fraim)->rsize, 4))
+
+/* Local variables (i.e. LOC_LOCAL) are on the memory stack, with their
+   offsets being relative to the memory stack pointer (high C) or
+   saved_msp (gcc).  */
+
+#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address (fi)
+extern CORE_ADDR frame_locals_address ();
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+/* We tried going to the effort of finding the tags word and getting
+   the argcount field from it, to support debugging assembler code.
+   Problem was, the "argcount" field never did hold the argument
+   count.  */
+#define	FRAME_NUM_ARGS(numargs, fi) ((numargs) = -1)
+
+#define FRAME_ARGS_ADDRESS(fi) FRAME_LOCALS_ADDRESS (fi)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Provide our own get_saved_register.  HAVE_REGISTER_WINDOWS is insufficient
+   because registers get renumbered on the a29k without getting saved.  */
+
+#define GET_SAVED_REGISTER
+
+/* Call function stuff.  */
+
+/* The dummy frame looks like this (see also the general frame picture
+   above):
+
+					register stack
+
+	                	      |                |  frame for function
+               	                      |   locals_sproc |  executing at time
+                                      |________________|  of call_function.
+                     		      |	               |  We must not disturb
+                     		      |	args_out_sproc |  it.
+        memory stack 		      |________________|
+                     		      |____lr1_sproc___|<-+
+       |            |		      |__retaddr_sproc_|  | <-- gr1 (at start)
+       |____________|<-msp 0 <-----------mfp_dummy_____|  |
+       |            |  (at start)     |  save regs     |  |
+       | arg_slop   |		      |  pc0,pc1       |  |
+       |            |		      |  pc2,lr0 sproc |  |
+       | (16 words) |		      | gr96-gr124     |  |
+       |____________|<-msp 1--after   | sr160-sr162    |  |
+       |            | PUSH_DUMMY_FRAME| sr128-sr135    |  |
+       | struct ret |                 |________________|  |
+       | 17+        |                 |                |  | 
+       |____________|<- lrp           | args_out_dummy |  |
+       | struct ret |		      |  (16 words)    |  |
+       | 16         |		      |________________|  |
+       | (16 words) |                 |____lr1_dummy___|--+
+       |____________|<- msp 2--after  |_retaddr_dummy__|<- gr1 after
+       |            | struct ret      |                |   PUSH_DUMMY_FRAME
+       | margs17+   | area allocated  |  locals_inf    |
+       |            |                 |________________|    called
+       |____________|<- msp 4--when   |                |    function's
+       |            |   inf called    | args_out_inf   |    frame (set up
+       | margs16    |                 |________________|    by called
+       | (16 words) |                 |_____lr1_inf____|    function).
+       |____________|<- msp 3--after  |       .        |
+       |            |   args pushed   |       .        |
+       |            |	              |       .        |
+                                      |                |
+
+   arg_slop: This area is so that when the call dummy adds 16 words to
+      the msp, it won't end up larger than mfp_dummy (it is needed in the
+      case where margs and struct_ret do not add up to at least 16 words).
+   struct ret:  This area is allocated by GDB if the return value is more
+      than 16 words.  struct ret_16 is not used on the a29k.
+   margs:  Pushed by GDB.  The call dummy copies the first 16 words to
+      args_out_dummy.
+   retaddr_sproc:  Contains the PC at the time we call the function.
+      set by PUSH_DUMMY_FRAME and read by POP_FRAME.
+   retaddr_dummy:  This points to a breakpoint instruction in the dummy.  */
+
+/* Rsize for dummy frame, in bytes.  */
+
+/* Bytes for outgoing args, lr1, and retaddr.  */
+#define DUMMY_ARG (2 * 4 + 16 * 4)
+
+/* Number of special registers (sr128-) to save.  */
+#define DUMMY_SAVE_SR128 8
+/* Number of special registers (sr160-) to save.  */
+#define DUMMY_SAVE_SR160 3
+/* Number of general (gr96- or gr64-) registers to save.  */
+#define DUMMY_SAVE_GREGS 29
+
+#define DUMMY_FRAME_RSIZE \
+(4 /* mfp_dummy */     	  \
+ + 4 * 4  /* pc0, pc1, pc2, lr0 */  \
+ + DUMMY_SAVE_GREGS * 4   \
+ + DUMMY_SAVE_SR160 * 4	  \
+ + DUMMY_SAVE_SR128 * 4	  \
+ + DUMMY_ARG		  \
+ + 4 /* pad to doubleword */ )
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME push_dummy_frame()
+extern void push_dummy_frame ();
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+#define POP_FRAME pop_frame()
+extern void pop_frame ();
+
+/* This sequence of words is the instructions
+   mtsrim cr, 15
+   loadm 0, 0, lr2, msp     ; load first 16 words of arguments into registers
+   add msp, msp, 16 * 4     ; point to the remaining arguments
+ CONST_INSN:
+   const lr0,inf		; (replaced by       half of target addr)
+   consth lr0,inf		; (replaced by other half of target addr)
+   calli lr0, lr0 
+   aseq 0x40,gr1,gr1   ; nop
+ BREAKPT_INSN:
+   asneq 0x50,gr1,gr1  ; breakpoint	(replaced by local breakpoint insn)
+   */
+
+#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER
+#define BS(const)	const
+#else
+#define	BS(const)	(((const) & 0xff) << 24) |	\
+			(((const) & 0xff00) << 8) |	\
+			(((const) & 0xff0000) >> 8) |	\
+			(((const) & 0xff000000) >> 24)
+#endif
+
+/* Position of the "const" and blkt instructions within CALL_DUMMY in bytes. */
+#define CONST_INSN (3 * 4)
+#define BREAKPT_INSN (7 * 4)
+#define CALL_DUMMY {	\
+		BS(0x0400870f),\
+		BS(0x36008200|(MSP_HW_REGNUM)), \
+		BS(0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16)), \
+		BS(0x03ff80ff),	\
+		BS(0x02ff80ff),	\
+		BS(0xc8008080),	\
+		BS(0x70400101),	\
+		BS(0x72500101)}
+#define CALL_DUMMY_LENGTH (8 * 4)
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+/* Helper macro for FIX_CALL_DUMMY.  WORDP is a long * which points to a
+   word in target byte order; bits 0-7 and 16-23 of *WORDP are replaced with
+   bits 0-7 and 8-15 of DATA (which is in host byte order).  */
+
+#if TARGET_BYTE_ORDER == BIG_ENDIAN
+#define STUFF_I16(WORDP, DATA) \
+  { \
+    *((char *)(WORDP) + 3) = ((DATA) & 0xff);\
+    *((char *)(WORDP) + 1) = (((DATA) >> 8) & 0xff);\
+  }
+#else /* Target is little endian.  */
+#define STUFF_I16(WORDP, DATA) \
+  {
+    *(char *)(WORDP) = ((DATA) & 0xff);
+    *((char *)(WORDP) + 2) = (((DATA) >> 8) & 0xff);
+  }
+#endif /* Target is little endian.  */
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+/* Currently this stuffs in the address of the function that we are calling.
+   Since different a29k systems use different breakpoint instructions, it
+   also stuffs BREAKPOINT in the right place (to avoid having to
+   duplicate CALL_DUMMY in each tm-*.h file).  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+  {\
+    STUFF_I16((char *)dummyname + CONST_INSN, fun);		\
+    STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);	\
+  /* FIXME  memcpy ((char *)(dummyname) + BREAKPT_INSN, break_insn, 4); */ \
+  }
+
+/* a29k architecture has separate data & instruction memories -- wired to
+   different pins on the chip -- and can't execute the data memory.
+   Also, there should be space after text_end;
+   we won't get a SIGSEGV or scribble on data space.  */
+
+#define CALL_DUMMY_LOCATION AFTER_TEXT_END
+
+/* Because of this, we need (as a kludge) to know the addresses of the
+   text section.  */
+
+#define	NEED_TEXT_START_END 1
+
+/* How to translate register numbers in the .stab's into gdb's internal register
+   numbers.  We don't translate them, but we warn if an invalid register
+   number is seen.  Note that FIXME, we use the value "sym" as an implicit
+   argument in printing the error message.  It happens to be available where
+   this macro is used.  (This macro definition appeared in a late revision
+   of gdb-3.91.6 and is not well tested.  Also, it should be a "complaint".) */
+
+#define	STAB_REG_TO_REGNUM(num) \
+	(((num) > LR0_REGNUM + 127) \
+	   ? fprintf(stderr, 	\
+		"Invalid register number %d in symbol table entry for %s\n", \
+	         (num), SYMBOL_SOURCE_NAME (sym)), (num)	\
+	   : (num))
+
+extern enum a29k_processor_types {
+  a29k_unknown,
+
+  /* Bit 0x400 of the CPS does *not* identify freeze mode, i.e. 29000,
+     29030, etc.  */
+  a29k_no_freeze_mode,
+
+  /* Bit 0x400 of the CPS does identify freeze mode, i.e. 29050.  */
+  a29k_freeze_mode
+} processor_type;
+
+/* We need three arguments for a general frame specification for the
+   "frame" or "info frame" command.  */
+
+#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv)
+extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *));
diff --git a/gdb/config/a29k/tm-ultra3.h b/gdb/config/a29k/tm-ultra3.h
new file mode 100644
index 0000000..8b96210
--- /dev/null
+++ b/gdb/config/a29k/tm-ultra3.h
@@ -0,0 +1,226 @@
+/* Parameters for NYU Ultracomputer 29000 target, for GDB, the GNU debugger.
+   Copyright 1990, 1991 Free Software Foundation, Inc.
+   Contributed by David Wood @ New York University (wood@nyu.edu). 
+   
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file includes tm-a29k.h, but predefines REGISTER_NAMES and
+   related macros.  The file supports a a29k running our flavor of
+   Unix on our Ultra3 PE Boards.  */
+
+/* Byte order is configurable, but this machine runs big-endian.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.
+ */
+#define NUM_REGS   (EXO_REGNUM + 1)	
+
+#define REGISTER_NAMES { 						 \
+ "gr1",									 \
+ "gr64", "gr65", "gr66", "gr67", "gr68", "gr69", "gr70", "gr71", "gr72", \
+ "gr73", "gr74", "gr75", "gr76", "gr77", "gr78", "gr79", "gr80", "gr81", \
+ "gr82", "gr83", "gr84", "gr85", "gr86", "gr87", "gr88", "gr89", "gr90", \
+ "gr91", "gr92", "gr93", "gr94", "gr95",				 \
+ "gr96", "gr97", "gr98", "gr99", "gr100", "gr101", "gr102", "gr103", "gr104", \
+ "gr105", "gr106", "gr107", "gr108", "gr109", "gr110", "gr111", "gr112", \
+ "gr113", "gr114", "gr115", "gr116", "gr117", "gr118", "gr119", "gr120", \
+ "gr121", "gr122", "gr123", "gr124", "gr125", "gr126", "gr127",		 \
+ "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", "lr8", "lr9",   \
+ "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", "lr16", "lr17", "lr18", \
+ "lr19", "lr20", "lr21", "lr22", "lr23", "lr24", "lr25", "lr26", "lr27", \
+ "lr28", "lr29", "lr30", "lr31", "lr32", "lr33", "lr34", "lr35", "lr36", \
+ "lr37", "lr38", "lr39", "lr40", "lr41", "lr42", "lr43", "lr44", "lr45", \
+ "lr46", "lr47", "lr48", "lr49", "lr50", "lr51", "lr52", "lr53", "lr54", \
+ "lr55", "lr56", "lr57", "lr58", "lr59", "lr60", "lr61", "lr62", "lr63", \
+ "lr64", "lr65", "lr66", "lr67", "lr68", "lr69", "lr70", "lr71", "lr72", \
+ "lr73", "lr74", "lr75", "lr76", "lr77", "lr78", "lr79", "lr80", "lr81", \
+ "lr82", "lr83", "lr84", "lr85", "lr86", "lr87", "lr88", "lr89", "lr90", \
+ "lr91", "lr92", "lr93", "lr94", "lr95", "lr96", "lr97", "lr98", "lr99", \
+ "lr100", "lr101", "lr102", "lr103", "lr104", "lr105", "lr106", "lr107", \
+ "lr108", "lr109", "lr110", "lr111", "lr112", "lr113", "lr114", "lr115", \
+ "lr116", "lr117", "lr118", "lr119", "lr120", "lr121", "lr122", "lr123", \
+ "lr124", "lr125", "lr126", "lr127",					 \
+ "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr",	 \
+ "pc0", "pc1", "pc2", "mmu", "lru",					 \
+ "ipc", "ipa", "ipb", "q", "alu", "bp", "fc", "cr",			 \
+ "fpe", "int", "fps", "exo" }
+
+
+#ifdef KERNEL_DEBUGGING
+# define	PADDR_U_REGNUM	22		/* gr86 */
+# define	RETURN_REGNUM	GR64_REGNUM	
+#else
+# define	RETURN_REGNUM	GR96_REGNUM	
+#endif	/* KERNEL_DEBUGGING */
+
+
+/* Should rename all GR96_REGNUM to RETURN_REGNUM */ 
+#define GR1_REGNUM 	(0)
+#define GR64_REGNUM	1
+#define GR96_REGNUM 	(GR64_REGNUM + 32)
+/* This needs to be the memory stack pointer, not the register stack pointer,
+   to make call_function work right.  */
+#define SP_REGNUM 	MSP_REGNUM
+
+#define FP_REGNUM 	(LR0_REGNUM + 1)	/* lr1 */
+/* Large Return Pointer  */
+#define LRP_REGNUM (123 - 96 + RETURN_REGNUM)
+/* Static link pointer   */
+#define SLP_REGNUM (124 - 96 + RETURN_REGNUM)
+/* Memory Stack Pointer.  */
+#define MSP_REGNUM (125 - 96 + RETURN_REGNUM)
+/* Register allocate bound.  */
+#define RAB_REGNUM (126 - 96 + RETURN_REGNUM)
+/* Register Free Bound.  */
+#define RFB_REGNUM (127 - 96 + RETURN_REGNUM)
+/* Register Stack Pointer.  */
+#define RSP_REGNUM GR1_REGNUM
+#define LR0_REGNUM ( 32 +  GR96_REGNUM) 
+
+/* Protected Special registers */
+#define VAB_REGNUM (LR0_REGNUM +  128)
+#define OPS_REGNUM (VAB_REGNUM + 1)  
+#define CPS_REGNUM (VAB_REGNUM + 2)  
+#define CFG_REGNUM (VAB_REGNUM + 3)  
+#define CHA_REGNUM (VAB_REGNUM + 4)  
+#define CHD_REGNUM (VAB_REGNUM + 5)  
+#define CHC_REGNUM (VAB_REGNUM + 6)  
+#define RBP_REGNUM (VAB_REGNUM + 7)  
+#define TMC_REGNUM (VAB_REGNUM + 8)  
+#define TMR_REGNUM (VAB_REGNUM + 9)  
+#define NPC_REGNUM (VAB_REGNUM + 10)	/* pc0 */
+#define PC_REGNUM  (VAB_REGNUM + 11)  	/* pc1 */
+#define PC2_REGNUM (VAB_REGNUM + 12)  	/* pc2 */
+#define MMU_REGNUM (VAB_REGNUM + 13)
+#define LRU_REGNUM (VAB_REGNUM + 14)
+	/* Register sequence gap */
+/* Unprotected Special registers */
+#define IPC_REGNUM (LRU_REGNUM + 1) 
+#define IPA_REGNUM (IPC_REGNUM + 1) 
+#define IPB_REGNUM (IPC_REGNUM + 2) 
+#define Q_REGNUM   (IPC_REGNUM + 3) 
+#define ALU_REGNUM (IPC_REGNUM + 4) 
+#define PS_REGNUM  ALU_REGNUM
+#define BP_REGNUM  (IPC_REGNUM + 5) 
+#define FC_REGNUM  (IPC_REGNUM + 6) 
+#define CR_REGNUM  (IPC_REGNUM + 7) 
+	/* Register sequence gap */
+#define FPE_REGNUM (CR_REGNUM  + 1) 
+#define INT_REGNUM (FPE_REGNUM + 1) 
+#define FPS_REGNUM (FPE_REGNUM + 2) 
+	/* Register sequence gap */
+#define EXO_REGNUM (FPS_REGNUM + 1) 
+
+/* Special register #x.  */
+#define SR_REGNUM(x) \
+  ((x) < 15  ? VAB_REGNUM + (x)					 \
+   : (x) >= 128 && (x) < 136 ? IPC_REGNUM + (x-128)		 \
+   : (x) >= 160 && (x) < 163 ? FPE_REGNUM + (x-160)		 \
+   : (x) == 164 ? EXO_REGNUM                                     \
+   : (error ("Internal error in SR_REGNUM"), 0))
+
+#ifndef KERNEL_DEBUGGING
+/*
+ * This macro defines the register numbers (from REGISTER_NAMES) that
+ * are effectively unavailable to the user through ptrace().  It allows 
+ * us to include the whole register set in REGISTER_NAMES (inorder to 
+ * better support remote debugging).  If it is used in 
+ * fetch/store_inferior_registers() gdb will not complain about I/O errors 
+ * on fetching these registers.  If all registers in REGISTER_NAMES
+ * are available, then return false (0).
+ */
+#define CANNOT_STORE_REGISTER(regno)		\
+                  (((regno)>=GR64_REGNUM && (regno)<GR64_REGNUM+32) ||	\
+                   ((regno)==VAB_REGNUM) ||	\
+		   ((regno)==OPS_REGNUM) ||	\
+                   ((regno)>=CFG_REGNUM && (regno)<=TMR_REGNUM)     ||	\
+                   ((regno)==MMU_REGNUM) ||	\
+		   ((regno)==LRU_REGNUM) ||	\
+                   ((regno)>=ALU_REGNUM) ||	\
+                   ((regno)==CR_REGNUM)  ||	\
+		   ((regno)==EXO_REGNUM))
+#define CANNOT_FETCH_REGISTER(regno)	CANNOT_STORE_REGISTER(regno)
+#endif /* KERNEL_DEBUGGING */
+
+/*
+ * Converts an sdb register number to an internal gdb register number.
+ * Currently under gcc, gr96->0...gr128->31...lr0->32...lr127->159, or...
+ * 		  	gr64->0...gr95->31, lr0->32...lr127->159.
+ */
+#define SDB_REG_TO_REGNUM(value) (((value)<32) ? ((value)+RETURN_REGNUM) : \
+		 		                 ((value)-32+LR0_REGNUM))
+
+#ifdef KERNEL_DEBUGGING
+  /* ublock virtual address as defined in our sys/param.h */
+  /* FIXME: Should get this from sys/param.h */
+# define UVADDR	((32*0x100000)-8192)    
+#endif
+
+/*
+ * Are we in sigtramp(), needed in infrun.c.  Specific to ultra3, because
+ * we take off the leading '_'.
+ */
+#if !defined(KERNEL_DEBUGGING)
+#ifdef SYM1
+# define IN_SIGTRAMP(pc, name) (name && STREQ ("sigtramp", name))
+#else
+        Need to define IN_SIGTRAMP() for sym2.
+#endif
+#endif /* !KERNEL_DEBUGGING */
+
+#include "a29k/tm-a29k.h"
+
+/**** The following are definitions that override those in tm-a29k.h ****/
+
+/* This sequence of words is the instructions
+   mtsrim cr, 15
+   loadm 0, 0, lr2, msp     ; load first 16 words of arguments into registers
+   add msp, msp, 16 * 4     ; point to the remaining arguments
+  CONST_INSN:
+   const gr96,inf
+   consth gr96,inf
+   calli lr0, gr96
+   aseq 0x40,gr1,gr1   ; nop
+   asneq 0x50,gr1,gr1  ; breakpoint
+   When KERNEL_DEBUGGIN is defined, msp -> gr93, gr96 -> gr64,
+                                    7d  -> 5d,    60  -> 40
+   */
+
+/* Position of the "const" instruction within CALL_DUMMY in bytes.  */
+#undef CALL_DUMMY
+#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER
+#ifdef KERNEL_DEBUGGING /* gr96 -> gr64 */
+#  define CALL_DUMMY {0x0400870f, 0x3600825d, 0x155d5d40, 0x03ff40ff,    \
+                    0x02ff40ff, 0xc8008040, 0x70400101, 0x72500101}
+#else
+#  define CALL_DUMMY {0x0400870f, 0x3600827d, 0x157d7d40, 0x03ff60ff,    \
+                    0x02ff60ff, 0xc8008060, 0x70400101, 0x72500101}
+#endif /* KERNEL_DEBUGGING */
+#else /* Byte order differs.  */
+  you lose
+#endif /* Byte order differs.  */
+
+#if !defined(KERNEL_DEBUGGING)
+# ifdef SYM1
+#  undef  DECR_PC_AFTER_BREAK
+#  define DECR_PC_AFTER_BREAK 0	/* Sym1 kernel does the decrement */
+# else
+    ->"ULTRA3 running other than sym1 OS"!;
+# endif
+#endif /* !KERNEL_DEBUGGING */
+
diff --git a/gdb/config/a29k/tm-vx29k.h b/gdb/config/a29k/tm-vx29k.h
new file mode 100644
index 0000000..487df82
--- /dev/null
+++ b/gdb/config/a29k/tm-vx29k.h
@@ -0,0 +1,229 @@
+/* Target machine description for VxWorks on the 29k, for GDB, the GNU debugger.
+   Copyright 1994 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "a29k/tm-a29k.h"
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (NUM_REGS)
+
+/* Number of registers in a ptrace_getfpregs call. */
+
+/* #define VX_SIZE_FPREGS */
+
+/* This is almost certainly the wrong place for this: */
+#define LR2_REGNUM 34
+
+
+/* Vxworks has its own CALL_DUMMY since it manages breakpoints in the kernel */
+
+#undef CALL_DUMMY
+
+/* Replace the breakpoint instruction in the CALL_DUMMY with a nop.
+   For Vxworks, the breakpoint is set and deleted by calls to
+   CALL_DUMMY_BREAK_SET and CALL_DUMMY_BREAK_DELETE.  */
+
+#if TARGET_BYTE_ORDER == HOST_BYTE_ORDER
+#define CALL_DUMMY {0x0400870f,\
+		0x36008200|(MSP_HW_REGNUM), \
+		0x15000040|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \
+		0x03ff80ff, 0x02ff80ff, 0xc8008080, 0x70400101, 0x70400101}
+#else /* Byte order differs.  */
+#define CALL_DUMMY {0x0f870004,\
+		0x00820036|(MSP_HW_REGNUM << 24), \
+		0x40000015|(MSP_HW_REGNUM<<8)|(MSP_HW_REGNUM<<16), \
+		0xff80ff03, 0xff80ff02, 0x808000c8, 0x01014070, 0x01014070}
+#endif /* Byte order differs.  */
+
+
+/* For the basic CALL_DUMMY definitions, see "tm-29k.h."  We use the
+   same CALL_DUMMY code, but define FIX_CALL_DUMMY (and related macros)
+   locally to handle remote debugging of VxWorks targets.  The difference
+   is in the setting and clearing of the breakpoint at the end of the
+   CALL_DUMMY code fragment; under VxWorks, we can't simply insert a
+   breakpoint instruction into the code, since that would interfere with
+   the breakpoint management mechanism on the target.
+   Note that CALL_DUMMY is a piece of code that is used to call any C function
+   thru VxGDB */
+
+/* The offset of the instruction within the CALL_DUMMY code where we
+   want the inferior to stop after the function call has completed.
+   call_function_by_hand () sets a breakpoint here (via CALL_DUMMY_BREAK_SET),
+   which POP_FRAME later deletes (via CALL_DUMMY_BREAK_DELETE).  */
+ 
+#define CALL_DUMMY_STOP_OFFSET (7 * 4)
+ 
+/* The offset of the first instruction of the CALL_DUMMY code fragment
+   relative to the frame pointer for a dummy frame.  This is equal to
+   the size of the CALL_DUMMY plus the arg_slop area size (see the diagram
+   in "tm-29k.h").  */
+/* PAD : the arg_slop area size doesn't appear to me to be useful since, the
+   call dummy code no longer modify the msp. See below. This must be checked. */
+
+#define CALL_DUMMY_OFFSET_IN_FRAME (CALL_DUMMY_LENGTH + 16 * 4)
+
+/* Insert the specified number of args and function address
+   into a CALL_DUMMY sequence stored at DUMMYNAME, replace the third
+   instruction (add msp, msp, 16*4) with a nop, and leave the final nop.
+   We can't keep using a CALL_DUMMY that modify the msp since, for VxWorks,
+   CALL_DUMMY is stored in the Memory Stack. Adding 16 words to the msp
+   would then make possible for the inferior to overwrite the CALL_DUMMY code,
+   thus creating a lot of trouble when exiting the inferior to come back in
+   a CALL_DUMMY code that no longer exists... Furthermore, ESF are also stored
+   from the msp in the memory stack. If msp is set higher than the dummy code,
+   an ESF may clobber this code. */
+
+#if TARGET_BYTE_ORDER == BIG_ENDIAN
+#define NOP_INSTR  0x70400101
+#else /* Target is little endian */
+#define NOP_INSTR  0x01014070
+#endif
+
+#undef FIX_CALL_DUMMY
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)  \
+  {                                                                   \
+    *(int *)((char *)dummyname + 8) = NOP_INSTR;                      \
+    STUFF_I16((char *)dummyname + CONST_INSN, fun);                   \
+    STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);         \
+  }
+
+/* For VxWorks, CALL_DUMMY must be stored in the stack of the task that is
+   being debugged and executed "in the context of" this task */
+
+#undef CALL_DUMMY_LOCATION
+#define CALL_DUMMY_LOCATION     ON_STACK
+
+/* Set or delete a breakpoint at the location within a CALL_DUMMY code
+   fragment where we want the target program to stop after the function
+   call is complete.  CALL_DUMMY_ADDR is the address of the first
+   instruction in the CALL_DUMMY.  DUMMY_FRAME_ADDR is the value of the
+   frame pointer in the dummy frame.
+
+   NOTE: in the both of the following definitions, we take advantage of
+	 knowledge of the implementation of the target breakpoint operation,
+	 in that we pass a null pointer as the second argument.  It seems
+	 reasonable to assume that any target requiring the use of 
+	 CALL_DUMMY_BREAK_{SET,DELETE} will not store the breakpoint
+	 shadow contents in GDB; in any case, this assumption is vaild
+	 for all VxWorks-related targets.  */
+
+#define CALL_DUMMY_BREAK_SET(call_dummy_addr) \
+  target_insert_breakpoint ((call_dummy_addr) + CALL_DUMMY_STOP_OFFSET, \
+			    (char *) 0)
+
+#define CALL_DUMMY_BREAK_DELETE(dummy_frame_addr) \
+  target_remove_breakpoint ((dummy_frame_addr) - (CALL_DUMMY_OFFSET_IN_FRAME \
+				                  - CALL_DUMMY_STOP_OFFSET), \
+			    (char *) 0)
+
+/* Return nonzero if the pc is executing within a CALL_DUMMY frame.  */
+
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address) \
+  ((pc) >= (sp) \
+    && (pc) <= (sp) + CALL_DUMMY_OFFSET_IN_FRAME + CALL_DUMMY_LENGTH)
+
+/* Defining this prevents us from trying to pass a structure-valued argument
+   to a function called via the CALL_DUMMY mechanism.  This is not handled
+   properly in call_function_by_hand (), and the fix might require re-writing
+   the CALL_DUMMY handling for all targets (at least, a clean solution
+   would probably require this).  Arguably, this should go in "tm-29k.h"
+   rather than here.  */
+   
+#define STRUCT_VAL_ARGS_UNSUPPORTED
+
+#define BKPT_OFFSET	(7 * 4)
+#define BKPT_INSTR	0x72500101
+
+#undef FIX_CALL_DUMMY
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+  {\
+    STUFF_I16((char *)dummyname + CONST_INSN, fun);\
+    STUFF_I16((char *)dummyname + CONST_INSN + 4, fun >> 16);\
+    *(int *)((char *)dummyname + BKPT_OFFSET) = BKPT_INSTR;\
+  }
+
+
+/* Offsets into jmp_buf.  They are derived from VxWorks' REG_SET struct
+   (see VxWorks' setjmp.h). Note that Sun2, Sun3 and SunOS4 and VxWorks have
+   different REG_SET structs, hence different layouts for the jmp_buf struct.
+   Only JB_PC is needed for getting the saved PC value.  */
+
+#define JB_ELEMENT_SIZE 4       /* size of each element in jmp_buf */
+#define JB_PC		3	/* offset of pc (pc1) in jmp_buf */
+ 
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  lr2 (LR2_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* VxWorks adjusts the PC after a breakpoint has been hit.  */
+ 
+#undef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 0
+
+/* Do whatever promotions are appropriate on a value being returned
+   from a function.  VAL is the user-supplied value, and FUNC_TYPE
+   is the return type of the function if known, else 0.
+ 
+   For the Am29k, as far as I understand, if the function return type is known,
+   cast the value to that type; otherwise, ensure that integer return values
+   fill all of gr96.
+
+   This definition really belongs in "tm-29k.h", since it applies
+   to most Am29K-based systems; but once moved into that file, it might
+   need to be redefined for all Am29K-based targets that also redefine
+   STORE_RETURN_VALUE.  For now, to be safe, we define it here.  */
+ 
+#define PROMOTE_RETURN_VALUE(val, func_type) \
+  do {                                                                  \
+      if (func_type)                                                    \
+        val = value_cast (func_type, val);                              \
+      if ((TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT                \
+           || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_ENUM)           \
+          && TYPE_LENGTH (VALUE_TYPE (val)) < REGISTER_RAW_SIZE (0))    \
+        val = value_cast (builtin_type_int, val);                       \
+  } while (0)
+
+extern int vx29k_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define FRAME_CHAIN_VALID(chain, thisframe) vx29k_frame_chain_valid (chain, thisframe)
+
+extern CORE_ADDR frame_saved_call_site ();
+
+#undef PREPARE_TO_INIT_FRAME_INFO
+#define PREPARE_TO_INIT_FRAME_INFO(fci)	do {				      \
+  long current_msp = read_register (MSP_REGNUM);			      \
+  if (PC_IN_CALL_DUMMY (fci->pc, current_msp, 0))			      \
+    {									      \
+      fci->rsize = DUMMY_FRAME_RSIZE;					      \
+      fci->msize = 0;							      \
+      fci->saved_msp =	 						      \
+	read_register_stack_integer (fci->frame + DUMMY_FRAME_RSIZE - 4, 4);  \
+      fci->flags |= (TRANSPARENT|MFP_USED);				      \
+      return;								      \
+    }									      \
+  } while (0)
diff --git a/gdb/config/a29k/ultra3.mh b/gdb/config/a29k/ultra3.mh
new file mode 100644
index 0000000..2f211c5
--- /dev/null
+++ b/gdb/config/a29k/ultra3.mh
@@ -0,0 +1,13 @@
+# Host: NYU Ultracomputer (AMD 29000 running Unix)
+
+CC=u3cc
+
+XM_FILE= xm-ultra3.h
+XDEPFILES= ultra3-xdep.o 
+
+MH_CFLAGS = -DSYM1
+XM_CLIBS = -lsysv -ljobs -ltermlib 
+
+NAT_FILE= nm-ultra3.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o ultra3-nat.o
+
diff --git a/gdb/config/a29k/ultra3.mt b/gdb/config/a29k/ultra3.mt
new file mode 100644
index 0000000..1f5fd2f
--- /dev/null
+++ b/gdb/config/a29k/ultra3.mt
@@ -0,0 +1,6 @@
+# Target: AMD 29000 running Unix on New York University processor board
+TDEPFILES= a29k-tdep.o
+TM_FILE= tm-ultra3.h
+
+# SYM1 is some OS they have.
+MT_CFLAGS = -DSYM1
diff --git a/gdb/config/a29k/vx29k.mt b/gdb/config/a29k/vx29k.mt
new file mode 100644
index 0000000..4d6f5cc
--- /dev/null
+++ b/gdb/config/a29k/vx29k.mt
@@ -0,0 +1,4 @@
+# Target: AMD 29k running VxWorks
+TDEPFILES= a29k-tdep.o remote-vx.o remote-vx29k.o xdr_ld.o xdr_ptrace.o xdr_rdb.o 
+TM_FILE= tm-vx29k.h
+MT_CFLAGS = -DNO_HIF_SUPPORT
diff --git a/gdb/config/a29k/xm-ultra3.h b/gdb/config/a29k/xm-ultra3.h
new file mode 100644
index 0000000..ec0b108
--- /dev/null
+++ b/gdb/config/a29k/xm-ultra3.h
@@ -0,0 +1,52 @@
+/* Host definitions for GDB running on an a29k NYU Ultracomputer
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+   Contributed by David Wood (wood@lab.ultra.nyu.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Here at NYU we have what we call an ULTRA3 PE board.  So
+   ifdefs for ULTRA3 are my doing.  At this point in time,
+   I don't know of any other Unixi running on the a29k.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#define HAVE_WAIT_STRUCT
+
+#ifndef L_SET
+# define L_SET   0 /* set the seek pointer */
+# define L_INCR  1 /* increment the seek pointer */
+# define L_XTND  2 /* extend the file size */
+#endif
+
+#ifndef O_RDONLY
+# define O_RDONLY 0
+# define O_WRONLY 1
+# define O_RDWR	  2
+#endif
+
+#ifndef F_OK
+# define R_OK 4
+# define W_OK 2
+# define X_OK 1
+# define F_OK 0
+#endif
+
+/* System doesn't provide siginterrupt().  */
+#define	NO_SIGINTERRUPT
+
+/* System uses a `short' to hold a process group ID.  */
+#define	SHORT_PGRP
diff --git a/gdb/config/alpha/alpha-linux.mh b/gdb/config/alpha/alpha-linux.mh
new file mode 100644
index 0000000..aa4a069
--- /dev/null
+++ b/gdb/config/alpha/alpha-linux.mh
@@ -0,0 +1,9 @@
+# Host: Little-endian Alpha running Linux
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-alphalinux.h
+NAT_FILE= nm-linux.h
+NATDEPFILES= infptrace.o inftarg.o corelow.o core-regset.o alpha-nat.o \
+	fork-child.o solib.o
+
+MMALLOC = 
+MMALLOC_CFLAGS = -DNO_MMALLOC 
diff --git a/gdb/config/alpha/alpha-linux.mt b/gdb/config/alpha/alpha-linux.mt
new file mode 100644
index 0000000..7789252
--- /dev/null
+++ b/gdb/config/alpha/alpha-linux.mt
@@ -0,0 +1,3 @@
+# Target: Little-endian Alpha
+TDEPFILES= alpha-tdep.o
+TM_FILE= tm-alphalinux.h
diff --git a/gdb/config/alpha/alpha-osf1.mh b/gdb/config/alpha/alpha-osf1.mh
new file mode 100644
index 0000000..6ed0f95
--- /dev/null
+++ b/gdb/config/alpha/alpha-osf1.mh
@@ -0,0 +1,5 @@
+# Host: Little-endian Alpha running OSF/1-1.x
+XDEPFILES= 
+XM_FILE= xm-alphaosf.h
+NAT_FILE= nm-osf.h
+NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o
diff --git a/gdb/config/alpha/alpha-osf1.mt b/gdb/config/alpha/alpha-osf1.mt
new file mode 100644
index 0000000..98f87c1
--- /dev/null
+++ b/gdb/config/alpha/alpha-osf1.mt
@@ -0,0 +1,3 @@
+# Target: Little-endian Alpha
+TDEPFILES= alpha-tdep.o
+TM_FILE= tm-alpha.h
diff --git a/gdb/config/alpha/alpha-osf2.mh b/gdb/config/alpha/alpha-osf2.mh
new file mode 100644
index 0000000..569b6fd
--- /dev/null
+++ b/gdb/config/alpha/alpha-osf2.mh
@@ -0,0 +1,5 @@
+# Host: Little-endian Alpha running OSF/1-2.x using procfs
+XDEPFILES= 
+XM_FILE= xm-alphaosf.h
+NAT_FILE= nm-osf2.h
+NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o procfs.o
diff --git a/gdb/config/alpha/alpha-osf3.mh b/gdb/config/alpha/alpha-osf3.mh
new file mode 100644
index 0000000..4997531
--- /dev/null
+++ b/gdb/config/alpha/alpha-osf3.mh
@@ -0,0 +1,5 @@
+# Host: Little-endian Alpha running OSF/1-3.x and higher using procfs
+XDEPFILES= 
+XM_FILE= xm-alphaosf.h
+NAT_FILE= nm-osf3.h
+NATDEPFILES= infptrace.o inftarg.o corelow.o alpha-nat.o fork-child.o osfsolib.o procfs.o
diff --git a/gdb/config/alpha/nm-linux.h b/gdb/config/alpha/nm-linux.h
new file mode 100644
index 0000000..eedb1a9
--- /dev/null
+++ b/gdb/config/alpha/nm-linux.h
@@ -0,0 +1,66 @@
+/* Native definitions for alpha running Linux.
+   Copyright (C) 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   argument regs.  A0_REGNUM points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* Tell gdb that we can attach and detach other processes */
+#define ATTACH_DETACH
+
+/* ptrace register ``addresses'' are absolute.  */
+
+#define U_REGS_OFFSET 0
+
+#define PTRACE_ARG3_TYPE long
+
+/* ptrace transfers longs, the ptrace man page is lying.  */
+
+#define PTRACE_XFER_TYPE long
+
+/* The alpha does not step over a breakpoint, the manpage is lying again.  */
+
+#define CANNOT_STEP_BREAKPOINT
+
+/* Linux has shared libraries.  */
+
+#define GDB_TARGET_HAS_SHARED_LIBS
+
+/* Support for shared libraries.  */
+
+#include "solib.h"
+
+#ifdef __ELF__
+#define SVR4_SHARED_LIBS
+#define TARGET_ELF64
+#endif
+
+/* This is a lie.  It's actually in stdio.h. */
+
+#define PSIGNAL_IN_SIGNAL_H
+
+/* Given a pointer to either a gregset_t or fpregset_t, return a
+   pointer to the first register.  */
+#define ALPHA_REGSET_BASE(regsetp)  ((long *) (regsetp))
diff --git a/gdb/config/alpha/nm-osf.h b/gdb/config/alpha/nm-osf.h
new file mode 100644
index 0000000..e06140d
--- /dev/null
+++ b/gdb/config/alpha/nm-osf.h
@@ -0,0 +1,56 @@
+/* Native definitions for alpha running OSF/1.
+   Copyright (C) 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   argument regs.  A0_REGNUM points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* ptrace register ``addresses'' are absolute.  */
+
+#define U_REGS_OFFSET 0
+
+/* FIXME: Shouldn't the default definition in inferior.h be int* ? */
+
+#define PTRACE_ARG3_TYPE int*
+
+/* ptrace transfers longs, the ptrace man page is lying.  */
+
+#define PTRACE_XFER_TYPE long
+
+/* The alpha does not step over a breakpoint, the manpage is lying again.  */
+
+#define CANNOT_STEP_BREAKPOINT
+
+/* OSF/1 has shared libraries.  */
+
+#define GDB_TARGET_HAS_SHARED_LIBS
+
+/* Support for shared libraries.  */
+
+#include "solib.h"
+
+/* Given a pointer to either a gregset_t or fpregset_t, return a
+   pointer to the first register.  */
+#define ALPHA_REGSET_BASE(regsetp)     ((regsetp)->regs)
diff --git a/gdb/config/alpha/nm-osf2.h b/gdb/config/alpha/nm-osf2.h
new file mode 100644
index 0000000..01725ef
--- /dev/null
+++ b/gdb/config/alpha/nm-osf2.h
@@ -0,0 +1,54 @@
+/* Native definitions for alpha running OSF/1-2.x, using procfs.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic OSF/1 definitions.  */
+#include "alpha/nm-osf.h"
+
+/* OSF/1-2.x has optional /proc support, try to use it instead of ptrace.  */
+#define USE_PROC_FS
+#define HAVE_OPTIONAL_PROC_FS
+
+/* OSF/1 doesn't provide the standard fault definitions, so don't use them.  */
+#define FAULTED_USE_SIGINFO
+
+/* Don't trace faults under OSF/1, rely on the posting of the appropriate
+   signal if fault tracing is disabled.
+   Tracing T_IFAULT under Alpha OSF/1 causes a `floating point enable'
+   fault from which we cannot continue (except by disabling the
+   tracing).
+   And as OSF/1 doesn't provide the standard fault definitions, the
+   mapping of faults to appropriate signals in procfs_wait is difficult.  */
+#define PROCFS_DONT_TRACE_FAULTS
+
+/* Work around some peculiarities in the OSF/1 procfs implementation.  */
+#define PROCFS_SIGPEND_OFFSET
+#define PROCFS_NEED_PIOCSSIG_FOR_KILL
+#define PROCFS_DONT_PIOCSSIG_CURSIG
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
+
+/* poll() doesn't seem to work properly for /proc in this version of the OS.
+   If we only specify POLLPRI, things hang.  It seems to get better when we set
+   POLLOUT, but that always returns POLLNVAL!!!  Also, POLLOUT causes problems
+   on other OSes.  */
+
+#define LOSING_POLL
diff --git a/gdb/config/alpha/nm-osf3.h b/gdb/config/alpha/nm-osf3.h
new file mode 100644
index 0000000..a1871a6
--- /dev/null
+++ b/gdb/config/alpha/nm-osf3.h
@@ -0,0 +1,26 @@
+/* Native definitions for alpha running OSF/1-3.x and higher, using procfs.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* OSF/1-3.x fixes some OSF/1-2.x procfs peculiarities and adds
+   a new one.  */
+#include "alpha/nm-osf2.h"
+
+#undef PROCFS_NEED_PIOCSSIG_FOR_KILL
+#undef PROCFS_DONT_PIOCSSIG_CURSIG
+#define PROCFS_NEED_CLEAR_CURSIG_FOR_KILL
diff --git a/gdb/config/alpha/tm-alpha.h b/gdb/config/alpha/tm-alpha.h
new file mode 100644
index 0000000..d9b9812
--- /dev/null
+++ b/gdb/config/alpha/tm-alpha.h
@@ -0,0 +1,479 @@
+/* Definitions to make GDB run on an Alpha box under OSF1.  This is
+   also used by the Alpha/Netware and Alpha/Linux targets.
+   Copyright 1993, 1994, 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_ALPHA_H
+#define TM_ALPHA_H
+
+#include "bfd.h"
+#include "coff/sym.h"		/* Needed for PDR below.  */
+#include "coff/symconst.h"
+
+#ifdef __STDC__
+struct frame_info;
+struct type;
+struct value;
+struct symbol;
+#endif
+
+#if !defined (TARGET_BYTE_ORDER)
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+/* Redefine some target bit sizes from the default.  */
+
+#define TARGET_LONG_BIT 64
+#define TARGET_LONG_LONG_BIT 64
+#define TARGET_PTR_BIT 64
+
+/* Floating point is IEEE compliant */
+#define IEEE_FLOAT
+
+/* Number of traps that happen between exec'ing the shell 
+ * to run an inferior, and when we finally get to 
+ * the inferior code.  This is 2 on most implementations.
+ */
+#define START_INFERIOR_TRAPS_EXPECTED 3
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)	pc = alpha_skip_prologue(pc, 0)
+extern CORE_ADDR alpha_skip_prologue PARAMS ((CORE_ADDR addr, int lenient));
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame)	alpha_saved_pc_after_call(frame)
+extern CORE_ADDR
+alpha_saved_pc_after_call PARAMS ((struct frame_info *));
+
+/* Are we currently handling a signal ?  */
+
+#define IN_SIGTRAMP(pc, name)	((name) && STREQ ("__sigtramp", (name)))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define BREAKPOINT {0x80, 0, 0, 0} /* call_pal bpt */
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#ifndef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 4
+#endif
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 8
+
+/* Number of machine registers */
+
+#define NUM_REGS 66
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES 	\
+    {	"v0",	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6", \
+	"t7",	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"fp", \
+	"a0",	"a1",	"a2",	"a3",	"a4",	"a5",	"t8",	"t9", \
+	"t10",	"t11",	"ra",	"t12",	"at",	"gp",	"sp",	"zero", \
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7", \
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15", \
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",\
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",\
+	"pc",	"vfp",						\
+    }
+
+/* Register numbers of various important registers.
+   Note that most of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and FP_REGNUM is a "phony" register number which is too large
+   to be an actual register number as far as the user is concerned
+   but serves to get the desired value when passed to read_register.  */
+
+#define V0_REGNUM 0		/* Function integer return value */
+#define T7_REGNUM 8		/* Return address register for OSF/1 __add* */
+#define GCC_FP_REGNUM 15	/* Used by gcc as frame register */
+#define A0_REGNUM 16		/* Loc of first arg during a subr call */
+#define T9_REGNUM 23		/* Return address register for OSF/1 __div* */
+#define T12_REGNUM 27		/* Contains start addr of current proc */
+#define SP_REGNUM 30		/* Contains address of top of stack */
+#define RA_REGNUM 26		/* Contains return address value */
+#define ZERO_REGNUM 31		/* Read-only register, always 0 */
+#define FP0_REGNUM 32           /* Floating point register 0 */
+#define FPA0_REGNUM 48          /* First float arg during a subr call */
+#define PC_REGNUM 64		/* Contains program counter */
+#define FP_REGNUM 65		/* Virtual frame pointer */
+
+#define CANNOT_FETCH_REGISTER(regno) \
+  ((regno) == FP_REGNUM || (regno) == ZERO_REGNUM)
+#define CANNOT_STORE_REGISTER(regno) \
+  ((regno) == FP_REGNUM || (regno) == ZERO_REGNUM)
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS * 8)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) * 8)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On Alphas, all regs are 8 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) 8
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On Alphas, all regs are 8 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) 8
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.
+   The alpha needs a conversion between register and memory format if
+   the register is a floating point register and
+      memory format is float, as the register format must be double
+   or
+      memory format is an integer with 4 bytes or less, as the representation
+      of integers in floating point registers is different. */
+
+#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM && (N) < FP0_REGNUM + 32)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM, TYPE, FROM, TO) \
+  alpha_register_convert_to_virtual (REGNUM, TYPE, FROM, TO)
+extern void
+alpha_register_convert_to_virtual PARAMS ((int, struct type *, char *, char *));
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE, REGNUM, FROM, TO)	\
+  alpha_register_convert_to_raw (TYPE, REGNUM, FROM, TO)
+extern void
+alpha_register_convert_to_raw PARAMS ((struct type *, int, char *, char *));
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+	(((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32)  \
+	 ? builtin_type_double : builtin_type_long) \
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  Handled by alpha_push_arguments.  */
+
+#define STORE_STRUCT_RETURN(addr, sp)	/**/
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  alpha_extract_return_value(TYPE, REGBUF, VALBUF)
+extern void
+alpha_extract_return_value PARAMS ((struct type *, char *, char *));
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  alpha_store_return_value(TYPE, VALBUF)
+extern void
+alpha_store_return_value PARAMS ((struct type *, char *));
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+/* The address is passed in a0 upon entry to the function, but when
+   the function exits, the compiler has copied the value to v0.  This
+   convention is specified by the System V ABI, so I think we can rely
+   on it.  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  (extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \
+		    REGISTER_RAW_SIZE (V0_REGNUM)))
+
+/* Structures are returned by ref in extra arg0 */
+#define USE_STRUCT_CONVENTION(gcc_p, type)	1
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+#define FRAME_CHAIN(thisframe) (CORE_ADDR) alpha_frame_chain (thisframe)
+extern CORE_ADDR alpha_frame_chain PARAMS ((struct frame_info *));
+
+/* Define other aspects of the stack frame.  */
+
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+/* We handle this differently for alpha, and maybe we should not */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS)  {(FRAMELESS) = 0;}
+
+/* Saved Pc.  */
+
+#define FRAME_SAVED_PC(FRAME)	(alpha_frame_saved_pc(FRAME))
+extern CORE_ADDR
+alpha_frame_saved_pc PARAMS ((struct frame_info *));
+
+/* The alpha has two different virtual pointers for arguments and locals.
+
+   The virtual argument pointer is pointing to the bottom of the argument
+   transfer area, which is located immediately below the virtual frame
+   pointer. Its size is fixed for the native compiler, it is either zero
+   (for the no arguments case) or large enough to hold all argument registers.
+   gcc uses a variable sized argument transfer area. As it has
+   to stay compatible with the native debugging tools it has to use the same
+   virtual argument pointer and adjust the argument offsets accordingly.
+
+   The virtual local pointer is localoff bytes below the virtual frame
+   pointer, the value of localoff is obtained from the PDR.  */
+
+#define ALPHA_NUM_ARG_REGS	6
+
+#define FRAME_ARGS_ADDRESS(fi)	((fi)->frame - (ALPHA_NUM_ARG_REGS * 8))
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame - (fi)->localoff)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(num, fi)	((num) = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+extern void alpha_find_saved_regs PARAMS ((struct frame_info *));
+
+#define FRAME_INIT_SAVED_REGS(frame_info) \
+  do { \
+    if ((frame_info)->saved_regs == NULL) \
+      alpha_find_saved_regs (frame_info); \
+    (frame_info)->saved_regs[SP_REGNUM] = (frame_info)->frame; \
+  } while (0)
+
+
+/* Things needed for making the inferior call functions.  */
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = alpha_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR
+alpha_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME 	alpha_push_dummy_frame()
+extern void
+alpha_push_dummy_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME		alpha_pop_frame()
+extern void
+alpha_pop_frame PARAMS ((void));
+
+/* Alpha OSF/1 inhibits execution of code on the stack.
+   But there is no need for a dummy on the alpha. PUSH_ARGUMENTS
+   takes care of all argument handling and bp_call_dummy takes care
+   of stopping the dummy.  */
+
+#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
+
+/* On the Alpha the call dummy code is never copied to user space,
+   stopping the user call is achieved via a bp_call_dummy breakpoint.
+   But we need a fake CALL_DUMMY definition to enable the proper
+   call_function_by_hand and to avoid zero length array warnings
+   in valops.c  */
+
+#define CALL_DUMMY { 0 }	/* Content doesn't matter. */
+
+#define CALL_DUMMY_START_OFFSET (0)
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+
+extern CORE_ADDR alpha_call_dummy_address PARAMS ((void));
+#define CALL_DUMMY_ADDRESS() alpha_call_dummy_address()
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.
+   We only have to set RA_REGNUM to the dummy breakpoint address
+   and T12_REGNUM (the `procedure value register') to the function address.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)    \
+{									\
+  CORE_ADDR bp_address = CALL_DUMMY_ADDRESS ();			\
+  if (bp_address == 0)							\
+    error ("no place to put call");					\
+  write_register (RA_REGNUM, bp_address);				\
+  write_register (T12_REGNUM, fun);					\
+}
+
+/* There's a mess in stack frame creation.  See comments in blockframe.c
+   near reference to INIT_FRAME_PC_FIRST.  */
+
+#define	INIT_FRAME_PC(fromleaf, prev) /* nada */
+
+#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
+  (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \
+	      (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ());
+
+/* Special symbol found in blocks associated with routines.  We can hang
+   alpha_extra_func_info_t's off of this.  */
+
+#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
+
+/* Specific information about a procedure.
+   This overlays the ALPHA's PDR records, 
+   alpharead.c (ab)uses this to save memory */
+
+typedef struct alpha_extra_func_info {
+	long	numargs;	/* number of args to procedure (was iopt) */
+	PDR	pdr;		/* Procedure descriptor record */
+} *alpha_extra_func_info_t;
+
+/* Define the extra_func_info that mipsread.c needs.
+   FIXME: We should define our own PDR interface, perhaps in a separate
+   header file. This would get rid of the <bfd.h> inclusion in all sources
+   and would abstract the mips/alpha interface from ecoff.  */
+#define mips_extra_func_info alpha_extra_func_info
+#define mips_extra_func_info_t alpha_extra_func_info_t
+
+#define EXTRA_FRAME_INFO \
+  int localoff; \
+  int pc_reg; \
+  alpha_extra_func_info_t proc_desc;
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci)
+extern void
+init_extra_frame_info PARAMS ((struct frame_info *));
+
+#define	PRINT_EXTRA_FRAME_INFO(fi) \
+  { \
+    if (fi && fi->proc_desc && fi->proc_desc->pdr.framereg < NUM_REGS) \
+      printf_filtered (" frame pointer is at %s+%d\n", \
+                       REGISTER_NAME (fi->proc_desc->pdr.framereg), \
+                                 fi->proc_desc->pdr.frameoffset); \
+  }
+
+/* It takes two values to specify a frame on the ALPHA.  Sigh.
+
+   In fact, at the moment, the *PC* is the primary value that sets up
+   a frame.  The PC is looked up to see what function it's in; symbol
+   information from that function tells us which register is the frame
+   pointer base, and what offset from there is the "virtual frame pointer".
+   (This is usually an offset from SP.)  FIXME -- this should be cleaned
+   up so that the primary value is the SP, and the PC is used to disambiguate
+   multiple functions with the same SP that are at different stack levels. */
+
+#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv)
+extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *));
+
+/* This is used by heuristic_proc_start.  It should be shot it the head.  */
+#ifndef VM_MIN_ADDRESS
+#define VM_MIN_ADDRESS (CORE_ADDR)0x120000000
+#endif
+
+/* If PC is in a shared library trampoline code, return the PC
+   where the function itself actually starts.  If not, return 0.  */
+#define SKIP_TRAMPOLINE_CODE(pc)  find_solib_trampoline_target (pc)
+
+/* If the current gcc for for this target does not produce correct debugging
+   information for float parameters, both prototyped and unprototyped, then
+   define this macro.  This forces gdb to  always assume that floats are
+   passed as doubles and then converted in the callee.
+
+   For the alpha, it appears that the debug info marks the parameters as
+   floats regardless of whether the function is prototyped, but the actual
+   values are always passed in as doubles.  Thus by setting this to 1, both
+   types of calls will work. */
+
+#define COERCE_FLOAT_TO_DOUBLE 1
+
+/* Return TRUE if procedure descriptor PROC is a procedure descriptor
+   that refers to a dynamically generated sigtramp function.
+
+   OSF/1 doesn't use dynamic sigtramp functions, so this is always
+   FALSE.  */
+
+#define PROC_DESC_IS_DYN_SIGTRAMP(proc)	(0)
+#define SET_PROC_DESC_IS_DYN_SIGTRAMP(proc)
+
+/* If PC is inside a dynamically generated sigtramp function, return
+   how many bytes the program counter is beyond the start of that
+   function.  Otherwise, return a negative value.
+
+   OSF/1 doesn't use dynamic sigtramp functions, so this always
+   returns -1.  */
+
+#define DYNAMIC_SIGTRAMP_OFFSET(pc)	(-1)
+
+/* Translate a signal handler frame into the address of the sigcontext
+   structure.  */
+
+#define SIGCONTEXT_ADDR(frame) \
+  (read_memory_integer ((frame)->next ? frame->next->frame : frame->frame, 8))
+
+/* If FRAME refers to a sigtramp frame, return the address of the next
+   frame.  */
+
+#define FRAME_PAST_SIGTRAMP_FRAME(frame, pc) \
+  (alpha_osf_skip_sigtramp_frame (frame, pc))
+extern CORE_ADDR alpha_osf_skip_sigtramp_frame PARAMS ((struct frame_info *, CORE_ADDR));
+
+#endif /* TM_ALPHA_H */
diff --git a/gdb/config/alpha/tm-alphalinux.h b/gdb/config/alpha/tm-alphalinux.h
new file mode 100644
index 0000000..d836a70
--- /dev/null
+++ b/gdb/config/alpha/tm-alphalinux.h
@@ -0,0 +1,80 @@
+/* Definitions to make GDB run on an Alpha box under Linux.  The
+   definitions here are used when the _target_ system is running Linux.
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_LINUXALPHA_H
+#define TM_LINUXALPHA_H
+
+#include "alpha/tm-alpha.h"
+
+/* Are we currently handling a signal ?  */
+
+extern long alpha_linux_sigtramp_offset PARAMS ((CORE_ADDR));
+#undef IN_SIGTRAMP
+#define IN_SIGTRAMP(pc, name)	(alpha_linux_sigtramp_offset (pc) >= 0)
+
+/* Get start and end address of sigtramp handler.  */
+
+#define SIGTRAMP_START(pc)	(pc - alpha_linux_sigtramp_offset (pc))
+#define SIGTRAMP_END(pc)	(SIGTRAMP_START(pc) + 3*4)
+
+
+/* Number of traps that happen between exec'ing the shell to run an
+   inferior, and when we finally get to the inferior code.  This is 2
+   on Linux and most implementations.  */
+
+#undef START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Return TRUE if procedure descriptor PROC is a procedure descriptor
+   that refers to a dynamically generated sigtramp function.  */
+
+#undef PROC_DESC_IS_DYN_SIGTRAMP
+#define PROC_SIGTRAMP_MAGIC	0x0e0f0f0f
+#define PROC_DESC_IS_DYN_SIGTRAMP(proc) ((proc)->pdr.isym		\
+					 == PROC_SIGTRAMP_MAGIC)
+#undef SET_PROC_DESC_IS_DYN_SIGTRAMP
+#define SET_PROC_DESC_IS_DYN_SIGTRAMP(proc) ((proc)->pdr.isym		\
+					     = PROC_SIGTRAMP_MAGIC)
+
+/* If PC is inside a dynamically generated sigtramp function, return
+   how many bytes the program counter is beyond the start of that
+   function.  Otherwise, return a negative value.  */
+
+#undef DYNAMIC_SIGTRAMP_OFFSET
+#define DYNAMIC_SIGTRAMP_OFFSET(pc)	(alpha_linux_sigtramp_offset (pc))
+
+/* Translate a signal handler frame into the address of the sigcontext
+   structure.  */
+
+#undef SIGCONTEXT_ADDR
+#define SIGCONTEXT_ADDR(frame)			((frame)->frame - 0x298)
+
+/* If FRAME refers to a sigtramp frame, return the address of the next frame.
+
+   Under Linux, sigtramp handlers have dynamically generated procedure
+   descriptors that make this hack unnecessary.  */
+
+#undef FRAME_PAST_SIGTRAMP_FRAME
+#define FRAME_PAST_SIGTRAMP_FRAME(frame, pc)	(0)
+
+/* We need this for the SOLIB_TRAMPOLINE stuff.  */
+#include "tm-sysv4.h"
+
+#endif /* TM_LINUXALPHA_H */
diff --git a/gdb/config/alpha/xm-alphalinux.h b/gdb/config/alpha/xm-alphalinux.h
new file mode 100644
index 0000000..a7aeab0
--- /dev/null
+++ b/gdb/config/alpha/xm-alphalinux.h
@@ -0,0 +1,29 @@
+/* Host definitions for GDB running on an Alpha under Linux
+   Copyright (C) 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+/* The alpha has no siginterrupt routine.  */
+#define NO_SIGINTERRUPT
+
+#define HAVE_TERMIOS
+#define HAVE_SIGSETMASK	1
+#define USG
diff --git a/gdb/config/alpha/xm-alphaosf.h b/gdb/config/alpha/xm-alphaosf.h
new file mode 100644
index 0000000..40b7fe0
--- /dev/null
+++ b/gdb/config/alpha/xm-alphaosf.h
@@ -0,0 +1,27 @@
+/* Host definitions for GDB running on an alpha under OSF/1
+   Copyright (C) 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+/* The alpha has no siginterrupt routine.  */
+#define NO_SIGINTERRUPT
+
+#define HAVE_TERMIOS
diff --git a/gdb/config/arc/arc.mt b/gdb/config/arc/arc.mt
new file mode 100644
index 0000000..8ee8c3d
--- /dev/null
+++ b/gdb/config/arc/arc.mt
@@ -0,0 +1,3 @@
+# Target: ARC processor
+TDEPFILES = arc-tdep.o
+TM_FILE = tm-arc.h
diff --git a/gdb/config/arc/tm-arc.h b/gdb/config/arc/tm-arc.h
new file mode 100644
index 0000000..e964bef
--- /dev/null
+++ b/gdb/config/arc/tm-arc.h
@@ -0,0 +1,347 @@
+/* Parameters for target machine ARC, for GDB, the GNU debugger.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Used by arc-tdep.c to set the default cpu type.  */
+#define DEFAULT_ARC_CPU_TYPE "base"
+
+/* Byte order is selectable.  */
+#define	TARGET_BYTE_ORDER_SELECTABLE
+
+/* We have IEEE floating point, if we have any float at all.  */
+#define IEEE_FLOAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  SKIP_PROLOGUE_FRAMELESS_P advances
+   the PC past some of the prologue, but stops as soon as it
+   knows that the function has a frame.  Its result is equal
+   to its input PC if the function is frameless, unequal otherwise.  */
+
+#define SKIP_PROLOGUE(pc) \
+  { pc = skip_prologue (pc, 0); }
+#define SKIP_PROLOGUE_FRAMELESS_P(pc) \
+  { pc = skip_prologue (pc, 1); }
+extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR, int));
+
+/* Sequence of bytes for breakpoint instruction.
+   ??? The current value is "sr -1,[-1]" and is for the simulator only.
+   The simulator watches for this and does the right thing.
+   The hardware version will have to associate with each breakpoint
+   the sequence "flag 1; nop; nop; nop".  IE: The breakpoint insn will not
+   be a fixed set of bits but instead will be a branch to a semi-random
+   address.  Presumably this will be cleaned up for "second silicon".  */
+#define BIG_BREAKPOINT { 0x12, 0x1f, 0xff, 0xff }
+#define LITTLE_BREAKPOINT { 0xff, 0xff, 0x1f, 0x12 }
+
+/* Given the exposed pipeline, there isn't any one correct value.
+   However, this value must be 4.  GDB can't handle any other value (other than
+   zero).  See for example infrun.c:
+   "prev_pc != stop_pc - DECR_PC_AFTER_BREAK"  */
+/* FIXME */
+#define DECR_PC_AFTER_BREAK 8
+
+/* We don't have a reliable single step facility.
+   ??? We do have a cycle single step facility, but that won't work.  */
+#define SOFTWARE_SINGLE_STEP_P 1
+extern void arc_software_single_step PARAMS ((unsigned int, int));
+#define SOFTWARE_SINGLE_STEP(sig,bp_p) arc_software_single_step (sig, bp_p)
+
+/* FIXME: Need to set STEP_SKIPS_DELAY.  */
+
+/* Given a pc value as defined by the hardware, return the real address.
+   Remember that on the ARC blink contains that status register which
+   includes PC + flags (so we have to mask out the flags).  */
+#define ARC_PC_TO_REAL_ADDRESS(pc) (((pc) & 0xffffff) << 2)
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function
+   executes some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  (ARC_PC_TO_REAL_ADDRESS (read_register (BLINK_REGNUM)))
+
+/* Stack grows upward */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+#define NUM_REGS 92
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES \
+{ \
+    /*  0 */ "r0",  "r1",  "r2",  "r3",  "r4",  "r5",  "r6",  "r7", \
+    /*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15", \
+    /* 16 */ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
+    /* 24 */ "r24", "r25", "r26", "fp", "sp", "ilink1", "ilink2", "blink", \
+    /* 32 */ "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", \
+    /* 40 */ "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47", \
+    /* 48 */ "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55", \
+    /* 56 */ "r56", "mlo", "mmid", "mhi", "lp_count", \
+    /* 61 */ "status", "sema", "lp_start", "lp_end", "identity", "debug", \
+    /* 67 */ "aux10", "aux11", "aux12", "aux13", "aux14", \
+    /* 72 */ "aux15", "aux16", "aux17", "aux18", "aux19", \
+    /* 77 */ "aux1a", "aux1b", "aux1c", "aux1d", "aux1e", \
+    /* 82 */ "aux1f", "aux20", "aux21", "aux22", \
+    /* 86 */ "aux30", "aux31", "aux32", "aux33", "aux40", \
+    /* 91 */ "pc" \
+}
+
+/* Register numbers of various important registers (used to index
+   into arrays of register names and register values).  */
+
+#define R0_REGNUM   0	   /* First local register		*/
+#define R59_REGNUM 59	   /* Last local register		*/
+#define FP_REGNUM  27	   /* Contains address of executing stack frame */
+#define SP_REGNUM  28      /* stack pointer */
+#define BLINK_REGNUM 31    /* link register */
+#define	STA_REGNUM 61	   /* processor status word */
+#define PC_REGNUM  91	   /* instruction pointer */
+#define AUX_BEG_REGNUM  61 /* aux reg begins */
+#define AUX_END_REGNUM  90 /* aux reg ends, pc not real aux reg */
+
+/* Fake registers used to mark immediate data.  */
+#define SHIMM_FLAG_REGNUM 61
+#define LIMM_REGNUM 62
+#define SHIMM_REGNUM 63
+
+#define AUX_REG_MAP \
+{ \
+   {  0,  1,  2,  3,  4,  5, \
+     16, -1, -1, -1, -1, \
+     -1, -1, -1, -1, -1, \
+     -1, -1, -1, -1, 30, \
+     -1, 32, 33, -1, \
+      48, 49, 50, 51, 64, \
+      0 \
+    }, \
+   {  0,  1,  2,  3,  4,  5, \
+     16, -1, -1, -1, -1, \
+     -1, -1, -1, -1, -1, \
+     -1, -1, -1, -1, 30, \
+     31, 32, 33, -1, \
+     -1, -1, -1, -1, -1, \
+      0 \
+    }, \
+   {  0,  1,  2,  3,  4,  5, \
+      16, 17, 18, 19, 20, \
+      21, 22, 23, 24, 25, \
+      26, 27, 28, 29, 30, \
+      31, 32, 33, 34, \
+     -1, -1, -1, -1, -1, \
+      0 \
+    } \
+}
+   
+#define PFP_REGNUM R0_REGNUM	/* Previous frame pointer	*/
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for register N.  */
+#define REGISTER_BYTE(N) (4*(N))
+
+/* Number of bytes of storage in the actual machine representation
+   for register N. */
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Number of bytes of storage in the program's representation for register N. */
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+#define REGISTER_VIRTUAL_TYPE(N) (builtin_type_int)
+
+
+/* Macros for understanding function return values... */
+
+/* Does the specified function use the "struct returning" convention
+   or the "value returning" convention?  The "value returning" convention
+   almost invariably returns the entire value in registers.  The
+   "struct returning" convention often returns the entire value in
+   memory, and passes a pointer (out of or into the function) saying
+   where the value (is or should go).
+
+   Since this sometimes depends on whether it was compiled with GCC,
+   this is also an argument.  This is used in call_function to build a
+   stack, and in value_being_returned to print return values.
+
+   On arc, a structure is always retunred with pointer in r0. */
+
+#define USE_STRUCT_CONVENTION(gcc_p, type) 1
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  This is only called if USE_STRUCT_CONVENTION for this
+   type is 0.
+*/
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+	memcpy(VALBUF, REGBUF+REGISTER_BYTE(R0_REGNUM), TYPE_LENGTH (TYPE))
+
+/* If USE_STRUCT_CONVENTION produces a 1, 
+   extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one). */
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+   (error("Don't know where large structure is returned on arc"), 0)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format, for "value returning" functions.
+   For 'return' command:  not (yet) implemented for arc.  */
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    error ("Returning values from functions is not implemented in arc gdb")
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    error ("Returning values from functions is not implemented in arc gdb")
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* We cache information about saved registers in the frame structure,
+   to save us from having to re-scan function prologues every time
+   a register in a non-current frame is accessed.  */
+
+#define EXTRA_FRAME_INFO \
+	struct frame_saved_regs *fsr; \
+	CORE_ADDR arg_pointer;
+
+/* Zero the frame_saved_regs pointer when the frame is initialized,
+   so that FRAME_FIND_SAVED_REGS () will know to allocate and
+   initialize a frame_saved_regs struct the first time it is called.
+   Set the arg_pointer to -1, which is not valid; 0 and other values
+   indicate real, cached values.  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+	((fi)->fsr = 0, (fi)->arg_pointer = -1)
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+/* On the arc, we get the chain pointer by reading the PFP saved
+   on the stack. */
+/* The PFP and RPC is in fp and fp+4.  */
+
+#define FRAME_CHAIN(thisframe) \
+  (read_memory_integer (FRAME_FP (thisframe), 4))
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.  */
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  do { \
+    if ((FI)->signal_handler_caller) \
+      (FRAMELESS) = 0; \
+    else \
+      (FRAMELESS) = frameless_look_for_prologue (FI); \
+  } while (0)
+
+/* Where is the PC for a specific frame.
+   A leaf function may never save blink, so we have to check for that here.  */
+
+#define FRAME_SAVED_PC(frame) (arc_frame_saved_pc (frame))
+struct frame_info; /* in case frame.h not included yet */
+CORE_ADDR arc_frame_saved_pc PARAMS ((struct frame_info *));
+
+/* If the argument is on the stack, it will be here.
+   We cache this value in the frame info if we've already looked it up.  */
+/* ??? Is the arg_pointer check necessary?  */
+
+#define FRAME_ARGS_ADDRESS(fi) \
+  (((fi)->arg_pointer != -1) ? (fi)->arg_pointer : (fi)->frame)
+
+/* This is the same except it should return 0 when
+   it does not really know where the args are, rather than guessing.
+   This value is not cached since it is only used infrequently.  */
+
+#define FRAME_LOCALS_ADDRESS(fi)	((fi)->frame)
+
+/* Set NUMARGS to the number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)	(numargs = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Produce the positions of the saved registers in a stack frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info_addr, sr) \
+	frame_find_saved_regs (frame_info_addr, &sr)
+extern void frame_find_saved_regs();		/* See arc-tdep.c */
+
+
+/* Things needed for making calls to functions in the inferior process */
+#define PUSH_DUMMY_FRAME \
+	push_dummy_frame ()
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+#define POP_FRAME \
+	pop_frame ()
+
+/* This sequence of words is the instructions  bl xxxx, flag 1 */
+#define CALL_DUMMY { 0x28000000, 0x1fbe8001 }   
+#define CALL_DUMMY_LENGTH 8
+
+/* Start execution at beginning of dummy */
+#define CALL_DUMMY_START_OFFSET 0 
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at 'dummyname'.*/  
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+{ \
+        int from, to, delta, loc; \
+        loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \
+        from = loc + 4; \
+        to = (int)(fun); \
+        delta = (to - from) >> 2; \
+        *((char *)(dummyname) + 1) = (delta & 0x1); \
+        *((char *)(dummyname) + 2) = ((delta >> 1) & 0xff); \
+        *((char *)(dummyname) + 3) = ((delta >> 9) & 0xff); \
+        *((char *)(dummyname) + 4) = ((delta >> 17) & 0x7); \
+}
+
diff --git a/gdb/config/arm/arm.mh b/gdb/config/arm/arm.mh
new file mode 100644
index 0000000..4fcf0de
--- /dev/null
+++ b/gdb/config/arm/arm.mh
@@ -0,0 +1,5 @@
+# Host: Acorn RISC machine running RISCiX (4.3bsd)
+XDEPFILES= infptrace.o inftarg.o fork-child.o arm-xdep.o arm-convert.o 
+XM_FILE= xm-arm.h
+
+NAT_FILE= nm-arm.h
diff --git a/gdb/config/arm/arm.mt b/gdb/config/arm/arm.mt
new file mode 100644
index 0000000..4933c46
--- /dev/null
+++ b/gdb/config/arm/arm.mt
@@ -0,0 +1,6 @@
+# Target: Acorn RISC machine (ARM) with simulator
+TDEPFILES= arm-tdep.o remote-rdp.o
+TM_FILE= tm-arm.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/arm/libsim.a
diff --git a/gdb/config/arm/nm-arm.h b/gdb/config/arm/nm-arm.h
new file mode 100644
index 0000000..970a885
--- /dev/null
+++ b/gdb/config/arm/nm-arm.h
@@ -0,0 +1,27 @@
+/* Definitions to make GDB run on an ARM under RISCiX (4.3bsd).
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0x01000000 - (UPAGES * NBPG))
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
diff --git a/gdb/config/arm/tm-arm.h b/gdb/config/arm/tm-arm.h
new file mode 100644
index 0000000..b327ac3
--- /dev/null
+++ b/gdb/config/arm/tm-arm.h
@@ -0,0 +1,453 @@
+/* Definitions to make GDB target for an ARM
+   Copyright 1986, 1987, 1989, 1991, 1993, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct type;
+struct value;
+#endif
+
+#define TARGET_BYTE_ORDER_SELECTABLE
+
+/* IEEE format floating point */
+
+#define IEEE_FLOAT
+
+/* FIXME: may need a floatformat_ieee_double_bigbyte_littleword format for
+   BIG_ENDIAN use. -fnf */
+
+#define TARGET_DOUBLE_FORMAT (target_byte_order == BIG_ENDIAN \
+			      ? &floatformat_ieee_double_big \
+			      : &floatformat_ieee_double_littlebyte_bigword)
+
+/* When reading symbols, we need to zap the low bit of the address, which
+   may be set to 1 for Thumb functions.  */
+
+#define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x1)
+
+/* Remove useless bits from addresses in a running program.  */
+
+CORE_ADDR arm_addr_bits_remove PARAMS ((CORE_ADDR));
+
+#define ADDR_BITS_REMOVE(val) (arm_addr_bits_remove (val))
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR arm_skip_prologue PARAMS ((CORE_ADDR pc));
+
+#define SKIP_PROLOGUE(pc) { pc = arm_skip_prologue (pc); }
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) arm_saved_pc_after_call (frame)
+struct frame_info;
+extern CORE_ADDR arm_saved_pc_after_call PARAMS ((struct frame_info *));
+
+/* I don't know the real values for these.  */
+#define TARGET_UPAGES UPAGES
+#define TARGET_NBPG NBPG
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR (0x01000000 - (TARGET_UPAGES * TARGET_NBPG))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* !!!! if we're using RDP, then we're inserting breakpoints and storing
+   their handles instread of what was in memory.  It is nice that
+   this is the same size as a handle - otherwise remote-rdp will
+   have to change. */
+
+/* BREAKPOINT_FROM_PC uses the program counter value to determine whether a
+   16- or 32-bit breakpoint should be used.  It returns a pointer
+   to a string of bytes that encode a breakpoint instruction, stores
+   the length of the string to *lenptr, and adjusts the pc (if necessary) to
+   point to the actual memory location where the breakpoint should be
+   inserted.  */
+
+extern breakpoint_from_pc_fn arm_breakpoint_from_pc;
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) arm_breakpoint_from_pc (pcptr, lenptr)
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* code to execute to print interesting information about the
+ * floating point processor (if any)
+ * No need to define if there is nothing to do.
+ */
+#define FLOAT_INFO { arm_float_info (); }
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+/* Note: I make a fake copy of the pc in register 25 (calling it ps) so
+   that I can clear the status bits from pc (register 15) */
+
+#define NUM_REGS 26
+
+/* An array of names of registers. */
+
+extern char **arm_register_names;
+#define REGISTER_NAME(i) arm_register_names[i]
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define A1_REGNUM 0		/* first integer-like argument */
+#define A4_REGNUM 3		/* last integer-like argument */
+#define AP_REGNUM 11
+#define FP_REGNUM 11		/* Contains address of executing stack frame */
+#define SP_REGNUM 13		/* Contains address of top of stack */
+#define LR_REGNUM 14		/* address to return to from a function call */
+#define PC_REGNUM 15		/* Contains program counter */
+#define F0_REGNUM 16		/* first floating point register */
+#define F3_REGNUM 19		/* last floating point argument register */
+#define F7_REGNUM 23		/* last floating point register */
+#define FPS_REGNUM 24		/* floating point status register */
+#define PS_REGNUM 25		/* Contains processor status */
+
+#define THUMB_FP_REGNUM 7	/* R7 is frame register on Thumb */
+
+#define ARM_NUM_ARG_REGS 	4
+#define ARM_LAST_ARG_REGNUM 	A4_REGNUM
+#define ARM_NUM_FP_ARG_REGS 	4
+#define ARM_LAST_FP_ARG_REGNUM	F3_REGNUM
+
+/* Instruction condition field values.  */
+#define INST_EQ		0x0
+#define INST_NE		0x1
+#define INST_CS		0x2
+#define INST_CC		0x3
+#define INST_MI		0x4
+#define INST_PL		0x5
+#define INST_VS		0x6
+#define INST_VC		0x7
+#define INST_HI		0x8
+#define INST_LS		0x9
+#define INST_GE		0xa
+#define INST_LT		0xb
+#define INST_GT		0xc
+#define INST_LE		0xd
+#define INST_AL		0xe
+#define INST_NV		0xf
+
+#define FLAG_N		0x80000000
+#define FLAG_Z		0x40000000
+#define FLAG_C		0x20000000
+#define FLAG_V		0x10000000
+
+
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (16*4 + 12*8 + 4 + 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) (((N) < F0_REGNUM) ? (N)*4 : \
+			  (((N) < PS_REGNUM) ? 16*4 + ((N) - 16)*12 : \
+			   16*4 + 8*12 + ((N) - FPS_REGNUM) * 4))
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the vax, all regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 12)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the vax, all regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((N) < F0_REGNUM || (N) >= FPS_REGNUM) ? 4 : 8)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 12 
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+#define REGISTER_CONVERTIBLE(N) ((unsigned)(N) - F0_REGNUM < 8)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  convert_from_extended ((FROM), & val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  convert_to_extended (&val, (TO)); \
+}
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (((unsigned)(N) - F0_REGNUM) < 8 ? builtin_type_double : builtin_type_int)
+
+/* The system C compiler uses a similar structure return convention to gcc */
+extern use_struct_convention_fn arm_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) arm_use_struct_convention (gcc_p, type)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (0, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+    convert_from_extended (REGBUF + REGISTER_BYTE (F0_REGNUM), VALBUF);	\
+  else									\
+    memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) {				\
+    char _buf[MAX_REGISTER_RAW_SIZE];					\
+    convert_to_extended (VALBUF, _buf); 					\
+    write_register_bytes (REGISTER_BYTE (F0_REGNUM), _buf, MAX_REGISTER_RAW_SIZE); \
+  } else								\
+    write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Specify that for the native compiler variables for a particular
+   lexical context are listed after the beginning LBRAC instead of
+   before in the executables list of symbols.  */
+#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (!(gcc_p))
+
+
+/* Define other aspects of the stack frame. 
+   We keep the offsets of all saved registers, 'cause we need 'em a lot!
+   We also keep the current size of the stack frame, and the offset of
+   the frame pointer from the stack pointer (for frameless functions, and
+   when we're still in the prologue of a function with a frame) */
+
+#define EXTRA_FRAME_INFO  	\
+  struct frame_saved_regs fsr;	\
+  int framesize;		\
+  int frameoffset;		\
+  int framereg;
+
+extern void arm_init_extra_frame_info PARAMS ((struct frame_info *fi));
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) arm_init_extra_frame_info (fi)
+
+/* Return the frame address.  On ARM, it is R11; on Thumb it is R7.  */
+CORE_ADDR arm_target_read_fp PARAMS ((void));
+#define TARGET_READ_FP() arm_target_read_fp ()
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+#define FRAME_CHAIN(thisframe) (CORE_ADDR) arm_frame_chain (thisframe)
+extern CORE_ADDR arm_frame_chain PARAMS ((struct frame_info *));
+
+extern int arm_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define FRAME_CHAIN_VALID(chain, thisframe) arm_frame_chain_valid (chain, thisframe)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+{							\
+  CORE_ADDR func_start, after_prologue;			\
+  func_start = (get_pc_function_start ((FI)->pc) +	\
+		FUNCTION_START_OFFSET);			\
+  after_prologue = func_start;				\
+  SKIP_PROLOGUE (after_prologue);			\
+  (FRAMELESS) = (after_prologue == func_start);		\
+}
+
+/* Saved Pc.  */
+
+#define FRAME_SAVED_PC(FRAME)	arm_frame_saved_pc (FRAME)
+extern CORE_ADDR arm_frame_saved_pc PARAMS ((struct frame_info *));
+
+#define FRAME_ARGS_ADDRESS(fi) (fi->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+struct frame_saved_regs;
+struct frame_info;
+void frame_find_saved_regs PARAMS((struct frame_info *fi,
+				   struct frame_saved_regs *fsr));
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+ arm_frame_find_saved_regs (frame_info, &(frame_saved_regs));
+
+
+/* Things needed for making the inferior call functions.  */
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = arm_push_arguments ((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR
+arm_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+void arm_push_dummy_frame PARAMS ((void));
+
+#define PUSH_DUMMY_FRAME arm_push_dummy_frame ()
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+void arm_pop_frame PARAMS ((void));
+
+#define POP_FRAME arm_pop_frame ()
+
+/* This sequence of words is the instructions
+
+     mov 	lr,pc
+     mov	pc,r4
+     illegal
+
+   Note this is 12 bytes.  */
+
+#define CALL_DUMMY {0xe1a0e00f, 0xe1a0f004, 0xE7FFDEFE}
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET arm_call_dummy_breakpoint_offset()
+extern int arm_call_dummy_breakpoint_offset PARAMS ((void));
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+   arm_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+
+void arm_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun,
+				 int nargs, struct value **args,
+				 struct type *type, int gcc_p));
+
+CORE_ADDR arm_get_next_pc PARAMS ((CORE_ADDR));
+
+/* Functions for dealing with Thumb call thunks.  */
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name)	arm_in_call_stub (pc, name)
+#define SKIP_TRAMPOLINE_CODE(pc)		arm_skip_stub (pc)
+extern int arm_in_call_stub PARAMS ((CORE_ADDR pc,  char *name));
+extern CORE_ADDR arm_skip_stub PARAMS ((CORE_ADDR pc));
+
+/* Function to determine whether MEMADDR is in a Thumb function.  */
+extern int arm_pc_is_thumb PARAMS ((bfd_vma memaddr));
+
+/* Function to determine whether MEMADDR is in a call dummy called from
+   a Thumb function.  */
+extern int arm_pc_is_thumb_dummy PARAMS ((bfd_vma memaddr));
+
+/* Macros for setting and testing a bit in a minimal symbol that
+   marks it as Thumb function.  The MSB of the minimal symbol's
+   "info" field is used for this purpose. This field is already
+   being used to store the symbol size, so the assumption is
+   that the symbol size cannot exceed 2^31.
+ 
+   COFF_MAKE_MSYMBOL_SPECIAL
+   ELF_MAKE_MSYMBOL_SPECIAL	tests whether the COFF or ELF symbol corresponds 
+                        to a thumb function, and sets a "special" bit in a
+                        minimal symbol to indicate that it does
+   MSYMBOL_SET_SPECIAL	actually sets the "special" bit
+   MSYMBOL_IS_SPECIAL   tests the "special" bit in a minimal symbol
+   MSYMBOL_SIZE         returns the size of the minimal symbol, i.e.
+                        the "info" field with the "special" bit masked out
+*/
+ 
+extern int coff_sym_is_thumb(int val);
+#define MSYMBOL_SET_SPECIAL(msym) \
+    MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) | 0x80000000)
+#define MSYMBOL_IS_SPECIAL(msym) \
+  (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
+#define MSYMBOL_SIZE(msym) \
+  ((long) MSYMBOL_INFO (msym) & 0x7fffffff)
+
+/* Thumb symbol are of type STT_LOPROC, (synonymous with STT_ARM_TFUNC) */
+#define ELF_MAKE_MSYMBOL_SPECIAL(sym,msym) \
+ { if(ELF_ST_TYPE(((elf_symbol_type *)(sym))->internal_elf_sym.st_info) == STT_LOPROC) \
+	MSYMBOL_SET_SPECIAL(msym); }
+  
+#define COFF_MAKE_MSYMBOL_SPECIAL(val,msym) \
+ { if(coff_sym_is_thumb(val)) MSYMBOL_SET_SPECIAL(msym); }
+
+#undef  IN_SIGTRAMP
+#define IN_SIGTRAMP(pc, name) 0
diff --git a/gdb/config/arm/xm-arm.h b/gdb/config/arm/xm-arm.h
new file mode 100644
index 0000000..34c0bd3
--- /dev/null
+++ b/gdb/config/arm/xm-arm.h
@@ -0,0 +1,76 @@
+/* Definitions to make GDB run on an ARM under RISCiX (4.3bsd).
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+
+#if 0
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
+  0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
+  0, 0, 0, 0, 0, 0, 0, 0}
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movl $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("pushl fp");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("pushl 8(sp)");        \
+  asm ("pushl 8(sp)");        \
+  asm ("pushal 0x14(sp)");    \
+  asm ("pushr $037777"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS      \
+{ asm ("popr $037777");    \
+  asm ("subl2 $8,(sp)");   \
+  asm ("movl (sp),sp");    \
+  asm ("rei"); }
+#endif /* 0 */
diff --git a/gdb/config/convex/Convex.notes b/gdb/config/convex/Convex.notes
new file mode 100644
index 0000000..28d336b
--- /dev/null
+++ b/gdb/config/convex/Convex.notes
@@ -0,0 +1,163 @@
+
+@node Convex,,, Top
+@appendix Convex-specific info
+@cindex Convex notes
+
+Scalar registers are 64 bits long, which is a pain since
+left half of an S register frequently contains noise.
+Therefore there are two ways to obtain the value of an S register.
+
+@table @kbd
+@item $s0
+returns the low half of the register as an int
+
+@item $S0
+returns the whole register as a long long
+@end table
+
+You can print the value in floating point by using @samp{p/f $s0} or @samp{p/f $S0}
+to print a single or double precision value.
+
+@cindex vector registers
+Vector registers are handled similarly, with @samp{$V0} denoting the whole
+64-bit register and @kbd{$v0} denoting the 32-bit low half; @samp{p/f $v0}
+or @samp{p/f $V0} can be used to examine the register in floating point.
+The length of the vector registers is taken from @samp{$vl}.  
+
+Individual elements of a vector register are denoted in the obvious way;
+@samp{print $v3[9]} prints the tenth element of register @kbd{v3}, and
+@samp{set $v3[9] = 1234} alters it.
+
+@kbd{$vl} and @kbd{$vs} are int, and @kbd{$vm} is an int vector.
+Elements of @kbd{$vm} can't be assigned to.
+
+@cindex communication registers
+@kindex info comm-registers
+Communication registers have names @kbd{$C0 .. $C63}, with @kbd{$c0 .. $c63}
+denoting the low-order halves.  @samp{info comm-registers} will print them
+all out, and tell which are locked.  (A communication register is
+locked when a value is sent to it, and unlocked when the value is
+received.)  Communication registers are, of course, global to all
+threads, so it does not matter what the currently selected thread is.
+@samp{info comm-reg @var{name}} prints just that one communication
+register; @samp{name} may also be a communication register number
+@samp{nn} or @samp{0xnn}.
+@samp{info comm-reg @var{address}} prints the contents of the resource
+structure at that address.
+
+@kindex info psw
+The command @samp{info psw} prints the processor status word @kbd{$ps}
+bit by bit.
+
+@kindex set base
+GDB normally prints all integers in base 10, but the leading
+@kbd{0x80000000} of pointers is intolerable in decimal, so the default
+output radix has been changed to try to print addresses appropriately.
+The @samp{set base} command can be used to change this.
+
+@table @code
+@item set base 10
+Integer values always print in decimal.
+
+@item set base 16
+Integer values always print in hex.
+
+@item set base
+Go back to the initial state, which prints integer values in hex if they
+look like pointers (specifically, if they start with 0x8 or 0xf in the
+stack), otherwise in decimal.
+@end table
+
+@kindex set pipeline
+When an exception such as a bus error or overflow happens, usually the PC
+is several instructions ahead by the time the exception is detected.
+The @samp{set pipe} command will disable this.
+
+@table @code
+@item set pipeline off
+Forces serial execution of instructions; no vector chaining and no 
+scalar instruction overlap.  With this, exceptions are detected with 
+the PC pointing to the instruction after the one in error.
+
+@item set pipeline on
+Returns to normal, fast, execution.  This is the default.
+@end table
+
+@cindex parallel
+In a parallel program, multiple threads may be executing, each
+with its own registers, stack, and local memory.  When one of them
+hits a breakpoint, that thread is selected.  Other threads do
+not run while the thread is in the breakpoint.
+
+@kindex 1cont
+The selected thread can be single-stepped, given signals, and so
+on.  Any other threads remain stopped.  When a @samp{cont} command is given,
+all threads are resumed.  To resume just the selected thread, use
+the command @samp{1cont}.
+
+@kindex thread
+The @samp{thread} command will show the active threads and the
+instruction they are about to execute.  The selected thread is marked
+with an asterisk.  The command @samp{thread @var{n}} will select thread @var{n},
+shifting the debugger's attention to it for single-stepping,
+registers, local memory, and so on.
+
+@kindex info threads
+The @samp{info threads} command will show what threads, if any, have
+invisibly hit breakpoints or signals and are waiting to be noticed.
+
+@kindex set parallel
+The @samp{set parallel} command controls how many threads can be active.
+
+@table @code
+@item set parallel off
+One thread.  Requests by the program that other threads join in
+(spawn and pfork instructions) do not cause other threads to start up.
+This does the same thing as the @samp{limit concurrency 1} command.
+
+@item set parallel fixed
+All CPUs are assigned to your program whenever it runs.  When it
+executes a pfork or spawn instruction, it begins parallel execution
+immediately.  This does the same thing as the @samp{mpa -f} command.
+
+@item set parallel on
+One or more threads.  Spawn and pfork cause CPUs to join in when and if
+they are free.  This is the default.  It is very good for system
+throughput, but not very good for finding bugs in parallel code.  If you
+suspect a bug in parallel code, you probably want @samp{set parallel fixed.}
+@end table
+
+@subsection Limitations
+
+WARNING: Convex GDB evaluates expressions in long long, because S
+registers are 64 bits long.  However, GDB expression semantics are not
+exactly C semantics.  This is a bug, strictly speaking, but it's not one I
+know how to fix.  If @samp{x} is a program variable of type int, then it
+is also type int to GDB, but @samp{x + 1} is long long, as is @samp{x + y}
+or any other expression requiring computation.  So is the expression
+@samp{1}, or any other constant.  You only really have to watch out for
+calls.  The innocuous expression @samp{list_node (0x80001234)} has an
+argument of type long long.  You must explicitly cast it to int.
+
+It is not possible to continue after an uncaught fatal signal by using
+@samp{signal 0}, @samp{return}, @samp{jump}, or anything else.  The difficulty is with
+Unix, not GDB.
+
+I have made no big effort to make such things as single-stepping a
+@kbd{join} instruction do something reasonable.  If the program seems to
+hang when doing this, type @kbd{ctrl-c} and @samp{cont}, or use
+@samp{thread} to shift to a live thread.  Single-stepping a @kbd{spawn}
+instruction apparently causes new threads to be born with their T bit set;
+this is not handled gracefully.  When a thread has hit a breakpoint, other
+threads may have invisibly hit the breakpoint in the background; if you
+clear the breakpoint gdb will be surprised when threads seem to continue
+to stop at it.  All of these situations produce spurious signal 5 traps;
+if this happens, just type @samp{cont}.  If it becomes a nuisance, use
+@samp{handle 5 nostop}.  (It will ask if you are sure.  You are.)
+
+There is no way in GDB to store a float in a register, as with
+@kbd{set $s0 = 3.1416}.  The identifier @kbd{$s0} denotes an integer,
+and like any C expression which assigns to an integer variable, the
+right-hand side is casted to type int.  If you should need to do
+something like this, you can assign the value to @kbd{@{float@} ($sp-4)}
+and then do @kbd{set $s0 = $sp[-4]}.  Same deal with @kbd{set $v0[69] = 6.9}.
diff --git a/gdb/config/convex/convex.mh b/gdb/config/convex/convex.mh
new file mode 100644
index 0000000..35a121f
--- /dev/null
+++ b/gdb/config/convex/convex.mh
@@ -0,0 +1,3 @@
+# Host: Convex Unix (4bsd)
+XDEPFILES= convex-xdep.o
+XM_FILE= xm-convex.h
diff --git a/gdb/config/convex/convex.mt b/gdb/config/convex/convex.mt
new file mode 100644
index 0000000..eefbeb3
--- /dev/null
+++ b/gdb/config/convex/convex.mt
@@ -0,0 +1,3 @@
+# Target: Convex Unix (4bsd)
+TDEPFILES= convex-tdep.o
+TM_FILE= tm-convex.h
diff --git a/gdb/config/convex/tm-convex.h b/gdb/config/convex/tm-convex.h
new file mode 100644
index 0000000..5eb9f6e
--- /dev/null
+++ b/gdb/config/convex/tm-convex.h
@@ -0,0 +1,511 @@
+/* Definitions to make GDB run on Convex Unix (4bsd)
+   Copyright 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* There is come problem with the debugging symbols generated by the
+   compiler such that the debugging symbol for the first line of a
+   function overlap with the function prologue.  */
+#define PROLOGUE_FIRSTLINE_OVERLAP
+
+/* When convex pcc says CHAR or SHORT, it provides the correct address.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* Symbol types to ignore.  */
+/* 0xc4 is N_MONPT.  Use the numeric value for the benefit of people
+   with (rather) old OS's.  */
+#define IGNORE_SYMBOL(TYPE) \
+    (((TYPE) & ~N_EXT) == N_TBSS       \
+     || ((TYPE) & ~N_EXT) == N_TDATA   \
+     || ((TYPE) & ~N_EXT) == 0xc4)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.
+   Convex prolog is:
+       [sub.w #-,sp]		in one of 3 possible sizes
+       [mov psw,-		fc/vc main program prolog
+        and #-,-		  (skip it because the "mov psw" saves the
+	mov -,psw]		   T bit, so continue gets a surprise trap)
+       [and #-,sp]		fc/vc O2 main program prolog
+       [ld.- -(ap),-]		pcc/gcc register arg loads
+*/
+
+#define SKIP_PROLOGUE(pc)  \
+{ int op, ix;								\
+  op = read_memory_integer (pc, 2);					\
+  if ((op & 0xffc7) == 0x5ac0) pc += 2;					\
+  else if (op == 0x1580) pc += 4;					\
+  else if (op == 0x15c0) pc += 6;					\
+  if ((read_memory_integer (pc, 2) & 0xfff8) == 0x7c40			\
+      && (read_memory_integer (pc + 2, 2) & 0xfff8) == 0x1240		\
+      && (read_memory_integer (pc + 8, 2) & 0xfff8) == 0x7c48)		\
+    pc += 10;								\
+  if (read_memory_integer (pc, 2) == 0x1240) pc += 6;			\
+  for (;;) {								\
+    op = read_memory_integer (pc, 2);					\
+    ix = (op >> 3) & 7;							\
+    if (ix != 6) break;							\
+    if ((op & 0xfcc0) == 0x3000) pc += 4;				\
+    else if ((op & 0xfcc0) == 0x3040) pc += 6;				\
+    else if ((op & 0xfcc0) == 0x2800) pc += 4;				\
+    else if ((op & 0xfcc0) == 0x2840) pc += 6;				\
+    else break;}}
+
+/* Immediately after a function call, return the saved pc.
+   (ignore frame and return *$sp so we can handle both calls and callq) */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+    read_memory_integer (read_register (SP_REGNUM), 4)
+
+/* Address of end of stack space.
+   This is ((USRSTACK + 0xfff) & -0x1000)) from <convex/vmparam.h> but
+   that expression depends on the kernel version; instead, fetch a
+   page-zero pointer and get it from that.  This will be invalid if
+   they ever change the way bkpt signals are delivered.  */
+
+#define STACK_END_ADDR (0xfffff000 & *(unsigned *) 0x80000050)
+
+/* User-mode traps push an extended rtn block,
+   then fault with one of the following PCs */
+
+#define is_trace_pc(pc)  ((unsigned) ((pc) - (*(int *) 0x80000040)) <= 4)
+#define is_arith_pc(pc)  ((unsigned) ((pc) - (*(int *) 0x80000044)) <= 4)
+#define is_break_pc(pc)  ((unsigned) ((pc) - (*(int *) 0x80000050)) <= 4)
+
+/* We need to manipulate trap bits in the psw */
+
+#define PSW_TRAP_FLAGS	0x69670000
+#define PSW_T_BIT	0x08000000
+#define PSW_S_BIT	0x01000000
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction. (bkpt)  */
+
+#define BREAKPOINT {0x7d,0x50}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT but not always.
+   (The break PC needs to be decremented by 2, but we do it when the
+   break frame is recognized and popped.  That way gdb can tell breaks
+   from trace traps with certainty.) */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 8
+
+/* Number of machine registers */
+
+#define NUM_REGS 26
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"pc","psw","fp","ap","a5","a4","a3","a2","a1","sp",\
+			"s7","s6","s5","s4","s3","s2","s1","s0",\
+			"S7","S6","S5","S4","S3","S2","S1","S0"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define S0_REGNUM 25		/* the real S regs */
+#define S7_REGNUM 18
+#define s0_REGNUM 17		/* low-order halves of S regs */
+#define s7_REGNUM 10
+#define SP_REGNUM 9 		/* A regs */
+#define A1_REGNUM 8
+#define A5_REGNUM 4
+#define AP_REGNUM 3
+#define FP_REGNUM 2		/* Contains address of executing stack frame */
+#define PS_REGNUM 1		/* Contains processor status */
+#define PC_REGNUM 0		/* Contains program counter */
+
+/* convert dbx stab register number (from `r' declaration) to a gdb REGNUM */
+
+#define STAB_REG_TO_REGNUM(value) \
+      ((value) < 8 ? S0_REGNUM - (value) : SP_REGNUM - ((value) - 8))
+
+/* Vector register numbers, not handled as ordinary regs.
+   They are treated as convenience variables whose values are read
+   from the inferior when needed.  */
+
+#define V0_REGNUM 0
+#define V7_REGNUM 7
+#define VM_REGNUM 8
+#define VS_REGNUM 9
+#define VL_REGNUM 10
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (4*10 + 8*8)
+
+/* Index within `registers' of the first byte of the space for
+   register N.
+   NB: must match structure of struct syscall_context for correct operation */
+
+#define REGISTER_BYTE(N) ((N) < s7_REGNUM ? 4*(N) : \
+			  (N) < S7_REGNUM ? 44 + 8 * ((N)-s7_REGNUM) : \
+			                    40 + 8 * ((N)-S7_REGNUM))
+
+/* Number of bytes of storage in the actual machine representation
+   for register N. */
+
+#define REGISTER_RAW_SIZE(N) ((N) < S7_REGNUM ? 4 : 8)
+
+/* Number of bytes of storage in the program's representation
+   for register N.   */
+
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+   ((N) < S7_REGNUM ? builtin_type_int : builtin_type_long_long)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (A1_REGNUM, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, &((char *) REGBUF) [REGISTER_BYTE (S0_REGNUM) + \
+			     8 - TYPE_LENGTH (TYPE)],\
+	 TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    write_register_bytes (REGISTER_BYTE (S0_REGNUM), VALBUF, 8)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+    (*(int *) & ((char *) REGBUF) [REGISTER_BYTE (s0_REGNUM)])
+
+/* Define trapped internal variable hooks to read and write
+   vector and communication registers.  */
+
+#define IS_TRAPPED_INTERNALVAR is_trapped_internalvar
+#define VALUE_OF_TRAPPED_INTERNALVAR value_of_trapped_internalvar
+#define SET_TRAPPED_INTERNALVAR set_trapped_internalvar
+
+extern struct value *value_of_trapped_internalvar ();
+
+/* Hooks to read data from soff exec and core files,
+   and to describe the files.  */
+
+#define FILES_INFO_HOOK print_maps
+
+/* Hook to call to print a typeless integer value, normally printed in decimal.
+   For convex, use hex instead if the number looks like an address.  */
+
+#define PRINT_TYPELESS_INTEGER decout
+
+/* For the native compiler, variables for a particular lexical context
+   are listed after the beginning LBRAC instead of before in the
+   executables list of symbols.  Using "gcc_compiled." to distinguish
+   between GCC and native compiler doesn't work on Convex because the
+   linker sorts the symbols to put "gcc_compiled." in the wrong place.
+   desc is nonzero for native, zero for gcc.   */
+#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) (desc != 0)
+
+/* Pcc occaisionally puts an SO where there should be an SOL.   */
+#define PCC_SOL_BROKEN
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame_info with a frame's nominal address in fi->frame,
+   and produces the frame's chain-pointer. */
+
+/* (caller fp is saved at 8(fp)) */
+
+#define FRAME_CHAIN(fi)   (read_memory_integer ((fi)->frame + 8, 4))
+
+/* Define other aspects of the stack frame.  */
+
+/* We need the boundaries of the text in the exec file, as a kludge,
+   for FRAMELESS_FUNCTION_INVOCATION and CALL_DUMMY_LOCATION. */
+
+#define	NEED_TEXT_START_END 1
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.
+   On convex, check at the return address for `callq' -- if so, frameless,
+   otherwise, not.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+{ 									\
+  extern CORE_ADDR text_start, text_end;				\
+  CORE_ADDR call_addr = SAVED_PC_AFTER_CALL (FI);			\
+  (FRAMELESS) = (call_addr >= text_start && call_addr < text_end	\
+		 && read_memory_integer (call_addr - 6, 1) == 0x22);	\
+}
+
+#define FRAME_SAVED_PC(fi) (read_memory_integer ((fi)->frame, 4))
+
+#define FRAME_ARGS_ADDRESS(fi) (read_memory_integer ((fi)->frame + 12, 4))
+
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)  \
+{ numargs = read_memory_integer (FRAME_ARGS_ADDRESS (fi) - 4, 4); \
+  if (numargs < 0 || numargs >= 256) numargs = -1;}
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+/* Normal (short) frames save only PC, FP, (callee's) AP.  To reasonably
+   handle gcc and pcc register variables, scan the code following the
+   call for the instructions the compiler inserts to reload register
+   variables from stack slots and record the stack slots as the saved
+   locations of those registers.  This will occasionally identify some
+   random load as a saved register; this is harmless.  vc does not
+   declare its register allocation actions in the stabs.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)		\
+{ register int regnum;							\
+  register int frame_length =	/* 3 short, 2 long, 1 extended, 0 context */\
+      (read_memory_integer ((frame_info)->frame + 4, 4) >> 25) & 3;	\
+  register CORE_ADDR frame_fp =						\
+      read_memory_integer ((frame_info)->frame + 8, 4);			\
+  register CORE_ADDR next_addr;						\
+  memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);			\
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 0;		\
+  (frame_saved_regs).regs[PS_REGNUM] = (frame_info)->frame + 4;		\
+  (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame + 8;		\
+  (frame_saved_regs).regs[AP_REGNUM] = frame_fp + 12;			\
+  next_addr = (frame_info)->frame + 12;					\
+  if (frame_length < 3)							\
+    for (regnum = A5_REGNUM; regnum < SP_REGNUM; ++regnum)		\
+      (frame_saved_regs).regs[regnum] = (next_addr += 4);		\
+  if (frame_length < 2)							\
+    (frame_saved_regs).regs[SP_REGNUM] = (next_addr += 4);		\
+  next_addr -= 4;							\
+  if (frame_length < 3)							\
+    for (regnum = S7_REGNUM; regnum < S0_REGNUM; ++regnum)		\
+      (frame_saved_regs).regs[regnum] = (next_addr += 8);		\
+  if (frame_length < 2)							\
+    (frame_saved_regs).regs[S0_REGNUM] = (next_addr += 8);		\
+  else									\
+    (frame_saved_regs).regs[SP_REGNUM] = next_addr + 8;			\
+  if (frame_length == 3) {						\
+    CORE_ADDR pc = read_memory_integer ((frame_info)->frame, 4);	\
+    int op, ix, disp;							\
+    op = read_memory_integer (pc, 2);					\
+    if ((op & 0xffc7) == 0x1480) pc += 4; 	/* add.w #-,sp */	\
+    else if ((op & 0xffc7) == 0x58c0) pc += 2;	/* add.w #-,sp */	\
+    op = read_memory_integer (pc, 2);					\
+    if ((op & 0xffc7) == 0x2a06) pc += 4;	/* ld.w -,ap */		\
+    for (;;) {								\
+      op = read_memory_integer (pc, 2);					\
+      ix = (op >> 3) & 7;						\
+      if ((op & 0xfcc0) == 0x2800) {		/* ld.- -,ak */		\
+        regnum = SP_REGNUM - (op & 7);					\
+	disp = read_memory_integer (pc + 2, 2);				\
+	pc += 4;}							\
+      else if ((op & 0xfcc0) == 0x2840) {	/* ld.- -,ak */		\
+        regnum = SP_REGNUM - (op & 7);					\
+	disp = read_memory_integer (pc + 2, 4);				\
+	pc += 6;}							\
+      if ((op & 0xfcc0) == 0x3000) {		/* ld.- -,sk */		\
+        regnum = S0_REGNUM - (op & 7);					\
+	disp = read_memory_integer (pc + 2, 2);				\
+	pc += 4;}							\
+      else if ((op & 0xfcc0) == 0x3040) {	/* ld.- -,sk */		\
+        regnum = S0_REGNUM - (op & 7);					\
+	disp = read_memory_integer (pc + 2, 4);				\
+	pc += 6;}							\
+      else if ((op & 0xff00) == 0x7100) {	/* br crossjump */	\
+        pc += 2 * (char) op;						\
+        continue;}							\
+      else if (op == 0x0140) {			/* jmp crossjump */	\
+        pc = read_memory_integer (pc + 2, 4);				\
+        continue;}							\
+      else break;							\
+      if ((frame_saved_regs).regs[regnum])				\
+	break;								\
+      if (ix == 7) disp += frame_fp;					\
+      else if (ix == 6) disp += read_memory_integer (frame_fp + 12, 4);	\
+      else if (ix != 0) break;						\
+      (frame_saved_regs).regs[regnum] =					\
+	disp - 8 + (1 << ((op >> 8) & 3));				\
+      if (regnum >= S7_REGNUM)						\
+        (frame_saved_regs).regs[regnum - S0_REGNUM + s0_REGNUM] =	\
+	  disp - 4 + (1 << ((op >> 8) & 3));				\
+    }									\
+  }									\
+}
+
+/* Things needed for making the inferior call functions.  */
+
+#define	CALL_DUMMY_LOCATION	BEFORE_TEXT_END
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);			\
+  register int regnum;				    			\
+  char buf[8];					    			\
+  long word;								\
+  for (regnum = S0_REGNUM; regnum >= S7_REGNUM; --regnum) { 		\
+    read_register_bytes (REGISTER_BYTE (regnum), buf, 8); 		\
+    sp = push_bytes (sp, buf, 8);}		    			\
+  for (regnum = SP_REGNUM; regnum >= FP_REGNUM; --regnum) { 		\
+    word = read_register (regnum);					\
+    sp = push_bytes (sp, &word, 4);}   					\
+  word = (read_register (PS_REGNUM) &~ (3<<25)) | (1<<25);		\
+  sp = push_bytes (sp, &word, 4); 					\
+  word = read_register (PC_REGNUM);					\
+  sp = push_bytes (sp, &word, 4);   					\
+  write_register (SP_REGNUM, sp);		    			\
+  write_register (FP_REGNUM, sp);		    			\
+  write_register (AP_REGNUM, sp);}
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  do {\
+  register CORE_ADDR fp = read_register (FP_REGNUM);	    \
+  register int regnum;					    \
+  register int frame_length =	/* 3 short, 2 long, 1 extended, 0 context */ \
+      (read_memory_integer (fp + 4, 4) >> 25) & 3;          \
+  char buf[8];					            \
+  write_register (PC_REGNUM, read_memory_integer (fp, 4));  \
+  write_register (PS_REGNUM, read_memory_integer (fp += 4, 4));  \
+  write_register (FP_REGNUM, read_memory_integer (fp += 4, 4));  \
+  write_register (AP_REGNUM, read_memory_integer (fp += 4, 4));  \
+  if (frame_length < 3) 				     \
+    for (regnum = A5_REGNUM; regnum < SP_REGNUM; ++regnum)   \
+      write_register (regnum, read_memory_integer (fp += 4, 4)); \
+  if (frame_length < 2)					     \
+    write_register (SP_REGNUM, read_memory_integer (fp += 4, 4)); \
+  fp -= 4;							\
+  if (frame_length < 3)  					\
+    for (regnum = S7_REGNUM; regnum < S0_REGNUM; ++regnum) {	\
+      read_memory (fp += 8, buf, 8);				\
+      write_register_bytes (REGISTER_BYTE (regnum), buf, 8);}   \
+  if (frame_length < 2)	{					\
+    read_memory (fp += 8, buf, 8);				\
+    write_register_bytes (REGISTER_BYTE (regnum), buf, 8);}     \
+  else write_register (SP_REGNUM, fp + 8);			\
+  flush_cached_frames ();					\
+} while (0)
+
+/* This sequence of words is the instructions
+     mov sp,ap
+     pshea 69696969
+     calls 32323232
+     bkpt
+   Note this is 16 bytes.  */
+
+#define CALL_DUMMY {0x50860d4069696969LL,0x2140323232327d50LL}
+
+#define CALL_DUMMY_LENGTH 16
+
+#define CALL_DUMMY_START_OFFSET 0
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ *(int *)((char *) dummyname + 4) = nargs;	\
+  *(int *)((char *) dummyname + 10) = fun; }
+
+/* Defs to read soff symbol tables, see dbxread.c */
+
+#define NUMBER_OF_SYMBOLS    ((long) opthdr.o_nsyms)
+#define STRING_TABLE_OFFSET  ((long) filehdr.h_strptr)
+#define SYMBOL_TABLE_OFFSET  ((long) opthdr.o_symptr)
+#define STRING_TABLE_SIZE    ((long) filehdr.h_strsiz)
+#define SIZE_OF_TEXT_SEGMENT ((long) txthdr.s_size)
+#define ENTRY_POINT          ((long) opthdr.o_entry)
+
+#define READ_STRING_TABLE_SIZE(BUFFER) \
+    (BUFFER = STRING_TABLE_SIZE)
+
+#define DECLARE_FILE_HEADERS \
+  FILEHDR filehdr;							\
+  OPTHDR opthdr;							\
+  SCNHDR txthdr
+
+#define READ_FILE_HEADERS(DESC,NAME) \
+{									\
+  int n;								\
+  val = myread (DESC, &filehdr, sizeof filehdr);			\
+  if (val < 0)								\
+    perror_with_name (NAME);						\
+  if (! IS_SOFF_MAGIC (filehdr.h_magic))				\
+    error ("%s: not an executable file.", NAME);			\
+  lseek (DESC, 0L, 0);							\
+  if (myread (DESC, &filehdr, sizeof filehdr) < 0)			\
+    perror_with_name (NAME);						\
+  if (myread (DESC, &opthdr, filehdr.h_opthdr) <= 0)			\
+    perror_with_name (NAME);						\
+  for (n = 0; n < filehdr.h_nscns; n++)					\
+    {									\
+      if (myread (DESC, &txthdr, sizeof txthdr) < 0)			\
+	perror_with_name (NAME);					\
+      if ((txthdr.s_flags & S_TYPMASK) == S_TEXT)			\
+	break;								\
+    }									\
+}
diff --git a/gdb/config/convex/xm-convex.h b/gdb/config/convex/xm-convex.h
new file mode 100644
index 0000000..cfcee4e
--- /dev/null
+++ b/gdb/config/convex/xm-convex.h
@@ -0,0 +1,35 @@
+/* Definitions to make GDB run on Convex Unix (4bsd)
+   Copyright 1989, 1991, 1992, 1996  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#define ATTACH_DETACH
+#define HAVE_WAIT_STRUCT
+#define NO_SIGINTERRUPT
+
+/* Use SIGCONT rather than SIGTSTP because convex Unix occasionally
+   turkeys SIGTSTP.  I think.  */
+
+#define STOP_SIGNAL SIGCONT
+
+/* Hook to call after creating inferior process.  Now init_trace_fun
+   is in the same place.  So re-write this to use the init_trace_fun
+   (making convex a debugging target).  FIXME.  */
+
+#define CREATE_INFERIOR_HOOK create_inferior_hook
diff --git a/gdb/config/d10v/d10v.mt b/gdb/config/d10v/d10v.mt
new file mode 100644
index 0000000..eddb1b3
--- /dev/null
+++ b/gdb/config/d10v/d10v.mt
@@ -0,0 +1,5 @@
+# Target: Mitsubishi D10V processor
+TDEPFILES= d10v-tdep.o remote-d10v.o
+TM_FILE= tm-d10v.h
+SIM_OBS= remote-sim.o
+SIM= ../sim/d10v/libsim.a
diff --git a/gdb/config/d10v/tm-d10v.h b/gdb/config/d10v/tm-d10v.h
new file mode 100644
index 0000000..ef75bc5
--- /dev/null
+++ b/gdb/config/d10v/tm-d10v.h
@@ -0,0 +1,337 @@
+/* Target-specific definition for the Mitsubishi D10V
+   Copyright (C) 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Martin Hunt, hunt@cygnus.com */
+
+#define GDB_TARGET_IS_D10V
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER	BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* these are the addresses the D10V-EVA board maps data */
+/* and instruction memory to. */
+
+#define DMEM_START	0x0000000
+#define IMEM_START	0x1000000
+#define STACK_START	0x0007ffe
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct frame_info;
+struct frame_saved_regs; 
+struct type;
+struct value;
+#endif
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR d10v_skip_prologue ();
+#define SKIP_PROLOGUE(ip) \
+    {(ip) = d10v_skip_prologue(ip);}
+
+
+/* Stack grows downward.  */
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* for a breakpoint, use "dbt || nop" */
+#define BREAKPOINT {0x2f, 0x90, 0x5e, 0x00} 
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+#define DECR_PC_AFTER_BREAK 4
+
+#define REGISTER_NAMES \
+{ "r0", "r1", "r2", "r3", "r4", "r5",  "r6", "r7", \
+    "r8", "r9", "r10","r11","r12", "r13", "r14","r15",\
+    "psw","bpsw","pc","bpc", "cr4", "cr5", "cr6", "rpt_c",\
+    "rpt_s","rpt_e", "mod_s", "mod_e", "cr12", "cr13", "iba", "cr15",\
+    "imap0","imap1","dmap","a0", "a1"\
+    }
+
+#define NUM_REGS 37
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define R0_REGNUM	0
+#define LR_REGNUM 	13
+#define SP_REGNUM 	15
+#define FP_REGNUM	11
+#define PC_REGNUM 	18
+#define PSW_REGNUM 	16
+#define IMAP0_REGNUM	32
+#define IMAP1_REGNUM	33
+#define DMAP_REGNUM	34
+#define A0_REGNUM 	35
+
+/* Say how much memory is needed to store a copy of the register set */
+#define REGISTER_BYTES    ((NUM_REGS-2)*2+16) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  \
+( ((N) > A0_REGNUM) ? ( ((N)-A0_REGNUM)*8 + A0_REGNUM*2 ) : ((N) * 2) )
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : 2 )
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */   
+#define REGISTER_VIRTUAL_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : ( ((N) == PC_REGNUM || (N) == SP_REGNUM) ? 4 : 2 ))
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+( ((N) < A0_REGNUM ) ? ((N) == PC_REGNUM || (N) == SP_REGNUM ? builtin_type_long : builtin_type_short) : builtin_type_long_long)
+
+
+/* convert $pc and $sp to/from virtual addresses */
+#define REGISTER_CONVERTIBLE(N) ((N) == PC_REGNUM || (N) == SP_REGNUM)
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+    ULONGEST x = extract_unsigned_integer ((FROM), REGISTER_RAW_SIZE (REGNUM)); \
+    if (REGNUM == PC_REGNUM) x = (x << 2) | IMEM_START; \
+    else x |= DMEM_START; \
+    store_unsigned_integer ((TO), TYPE_LENGTH(TYPE), x); \
+}
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
+{ \
+    ULONGEST x = extract_unsigned_integer ((FROM), TYPE_LENGTH(TYPE)); \
+    x &= 0x3ffff; \
+    if (REGNUM == PC_REGNUM) x >>= 2; \
+    store_unsigned_integer ((TO), 2, x); \
+}
+
+#define D10V_MAKE_DADDR(x) ((x) | DMEM_START)
+#define D10V_MAKE_IADDR(x) (((x) << 2) | IMEM_START)
+
+#define D10V_DADDR_P(X) (((X) & 0x3000000) == DMEM_START)
+#define D10V_IADDR_P(X) (((X) & 0x3000000) == IMEM_START)
+
+#define D10V_CONVERT_IADDR_TO_RAW(X) (((X) >> 2) & 0xffff)
+#define D10V_CONVERT_DADDR_TO_RAW(X) ((X) & 0xffff)
+
+#define ARG1_REGNUM R0_REGNUM
+#define ARGN_REGNUM 3
+#define RET1_REGNUM R0_REGNUM
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. 
+
+   We store structs through a pointer passed in the first Argument
+   register. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    { write_register (ARG1_REGNUM, (ADDR));  }
+
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  
+
+   Things always get returned in RET1_REGNUM, RET2_REGNUM, ... */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(RET1_REGNUM), VALBUF, TYPE_LENGTH (TYPE))
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+     (extract_address ((REGBUF) + REGISTER_BYTE (ARG1_REGNUM), REGISTER_RAW_SIZE (ARG1_REGNUM)) | DMEM_START)
+
+/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of
+   EXTRACT_RETURN_VALUE?  GCC_P is true if compiled with gcc
+   and TYPE is the type (which is known to be struct, union or array).
+
+   The d10v returns anything less than 8 bytes in size in
+   registers. */
+
+extern use_struct_convention_fn d10v_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) d10v_use_struct_convention (gcc_p, type)
+
+
+
+/* Define other aspects of the stack frame. 
+   we keep a copy of the worked out return pc lying around, since it
+   is a useful bit of info */
+
+#define EXTRA_FRAME_INFO \
+    CORE_ADDR return_pc; \
+    int frameless; \
+    int size;
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+    d10v_init_extra_frame_info(fromleaf, fi) 
+
+extern void d10v_init_extra_frame_info PARAMS (( int fromleaf, struct frame_info *fi ));
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_CHAIN(FRAME)       d10v_frame_chain(FRAME)
+extern int d10v_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define FRAME_CHAIN_VALID(chain, thisframe) d10v_frame_chain_valid (chain, thisframe)
+#define FRAME_SAVED_PC(FRAME)    ((FRAME)->return_pc)   
+#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+/* Immediately after a function call, return the saved pc.  We can't */
+/* use frame->return_pc beause that is determined by reading R13 off the */
+/*stack and that may not be written yet. */
+
+#define SAVED_PC_AFTER_CALL(frame) ((read_register(LR_REGNUM) << 2) | IMEM_START)
+    
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+/* We can't tell how many args there are */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   d10v_frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+extern void d10v_frame_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *));
+
+#define NAMES_HAVE_UNDERSCORE
+
+
+/* DUMMY FRAMES.  Need these to support inferior function calls.  They
+   work like this on D10V: First we set a breakpoint at 0 or __start.
+   Then we push all the registers onto the stack.  Then put the
+   function arguments in the proper registers and set r13 to our
+   breakpoint address.  Finally, the PC is set to the start of the
+   function being called (no JSR/BSR insn).  When it hits the
+   breakpoint, clear the break point and pop the old register contents
+   off the stack.  */
+
+extern void d10v_pop_frame PARAMS ((struct frame_info *frame));
+#define POP_FRAME generic_pop_current_frame (d10v_pop_frame)
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+extern CORE_ADDR d10v_push_return_address PARAMS ((CORE_ADDR pc, CORE_ADDR sp));
+#define PUSH_RETURN_ADDRESS(PC, SP)  d10v_push_return_address (PC, SP)
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+/* #define PC_IN_CALL_DUMMY(pc, sp, frame_address) ( pc == IMEM_START + 4 ) */
+
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+
+/* override the default get_saved_register function with one that
+   takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+#define get_saved_register generic_get_saved_register
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = d10v_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR d10v_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+d10v_extract_return_value(TYPE, REGBUF, VALBUF)
+  extern void
+d10v_extract_return_value PARAMS ((struct type *, char *, char *));
+
+
+#define REGISTER_SIZE 2
+
+#ifdef CC_HAS_LONG_LONG
+#  define LONGEST long long
+#else
+#  define LONGEST long
+#endif 
+#define ULONGEST unsigned LONGEST
+
+void d10v_write_pc PARAMS ((CORE_ADDR val, int pid));
+CORE_ADDR d10v_read_pc PARAMS ((int pid));
+void d10v_write_sp PARAMS ((CORE_ADDR val));
+CORE_ADDR d10v_read_sp PARAMS ((void));
+void d10v_write_fp PARAMS ((CORE_ADDR val));
+CORE_ADDR d10v_read_fp PARAMS ((void));
+
+#define TARGET_READ_PC(pid)		d10v_read_pc (pid)
+#define TARGET_WRITE_PC(val,pid)	d10v_write_pc (val, pid)
+#define TARGET_READ_FP()		d10v_read_fp ()
+#define TARGET_WRITE_FP(val)		d10v_write_fp (val)
+#define TARGET_READ_SP()		d10v_read_sp ()
+#define TARGET_WRITE_SP(val)		d10v_write_sp (val)
+
+/* Number of bits in the appropriate type */
+#define TARGET_INT_BIT (2 * TARGET_CHAR_BIT)
+#define TARGET_PTR_BIT (4 * TARGET_CHAR_BIT)
+#define TARGET_DOUBLE_BIT (4 * TARGET_CHAR_BIT)
+#define TARGET_LONG_DOUBLE_BIT (8 * TARGET_CHAR_BIT)
+
+
+/* For the d10v when talking to the remote d10v board, GDB addresses
+   need to be translated into a format that the d10v rom monitor
+   understands. */
+
+int remote_d10v_translate_xfer_address PARAMS ((CORE_ADDR gdb_addr, int gdb_len, CORE_ADDR *rem_addr));
+#define REMOTE_TRANSLATE_XFER_ADDRESS(GDB_ADDR, GDB_LEN, REM_ADDR, REM_LEN) \
+(REM_LEN) = remote_d10v_translate_xfer_address ((GDB_ADDR), (GDB_LEN), &(REM_ADDR))
+
diff --git a/gdb/config/d30v/d30v.mt b/gdb/config/d30v/d30v.mt
new file mode 100644
index 0000000..da0af2f
--- /dev/null
+++ b/gdb/config/d30v/d30v.mt
@@ -0,0 +1,5 @@
+# Target: Mitsubishi D30V processor
+TDEPFILES= d30v-tdep.o
+TM_FILE= tm-d30v.h
+SIM_OBS= remote-sim.o
+SIM= ../sim/d30v/libsim.a
diff --git a/gdb/config/d30v/tm-d30v.h b/gdb/config/d30v/tm-d30v.h
new file mode 100644
index 0000000..7a69ca3
--- /dev/null
+++ b/gdb/config/d30v/tm-d30v.h
@@ -0,0 +1,325 @@
+/* Target-specific definition for the Mitsubishi D30V
+   Copyright (C) 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_D30V_H
+#define TM_D30V_H
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER	BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* these are the addresses the D30V-EVA board maps data */
+/* and instruction memory to. */
+
+#define DMEM_START	0x20000000
+#define IMEM_START	0x00000000 /* was 0x10000000 */
+#define STACK_START	0x20007ffe
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct frame_info;
+struct frame_saved_regs; 
+struct type;
+struct value;
+#endif
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR d30v_skip_prologue ();
+#define SKIP_PROLOGUE(ip) \
+    {(ip) = d30v_skip_prologue(ip);}
+
+
+/* Stack grows downward.  */
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* for a breakpoint, use "dbt || nop" */
+#define BREAKPOINT {0x00, 0xb0, 0x00, 0x00,\
+		    0x00, 0xf0, 0x00, 0x00}
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+#define DECR_PC_AFTER_BREAK 0
+
+#define REGISTER_NAMES \
+{   "r0",  "r1",  "r2",  "r3",  "r4",  "r5",  "r6",  "r7",	\
+    "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",	\
+    "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",	\
+    "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",	\
+    "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39",	\
+    "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47",	\
+    "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55",	\
+    "r56", "r57", "r58", "r59", "r60", "r61", "r62", "r63",	\
+    "spi", "spu", \
+    "psw", "bpsw", "pc", "bpc", "dpsw", "dpc", "cr6", "rpt_c",	\
+    "rpt_s", "rpt_e", "mod_s", "mod_e", "cr12", "cr13", "iba", "eit_vb",\
+    "int_s", "int_m", "a0", "a1" \
+    }
+
+#define NUM_REGS 86
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define R0_REGNUM	0
+#define FP_REGNUM	61
+#define LR_REGNUM 	62
+#define SP_REGNUM 	63
+#define SPI_REGNUM	64	/* Interrupt stack pointer */
+#define SPU_REGNUM	65	/* User stack pointer */
+#define CREGS_START	66
+
+#define PSW_REGNUM 	(CREGS_START + 0) /* psw, bpsw, or dpsw??? */
+#define     PSW_SM (((unsigned long)0x80000000) >> 0)	/* Stack mode: 0/SPI */
+							/*	       1/SPU */
+#define     PSW_EA (((unsigned long)0x80000000) >> 2)	/* Execution status */
+#define     PSW_DB (((unsigned long)0x80000000) >> 3)	/* Debug mode */
+#define     PSW_DS (((unsigned long)0x80000000) >> 4)	/* Debug EIT status */
+#define     PSW_IE (((unsigned long)0x80000000) >> 5)	/* Interrupt enable */
+#define     PSW_RP (((unsigned long)0x80000000) >> 6)	/* Repeat enable */
+#define     PSW_MD (((unsigned long)0x80000000) >> 7)	/* Modulo enable */
+#define     PSW_F0 (((unsigned long)0x80000000) >> 17)	/* F0 flag */
+#define     PSW_F1 (((unsigned long)0x80000000) >> 19)	/* F1 flag */
+#define     PSW_F2 (((unsigned long)0x80000000) >> 21)	/* F2 flag */
+#define     PSW_F3 (((unsigned long)0x80000000) >> 23)	/* F3 flag */
+#define     PSW_S  (((unsigned long)0x80000000) >> 25)	/* Saturation flag */
+#define     PSW_V  (((unsigned long)0x80000000) >> 27)	/* Overflow flag */
+#define     PSW_VA (((unsigned long)0x80000000) >> 29)	/* Accum. overflow */
+#define     PSW_C  (((unsigned long)0x80000000) >> 31)	/* Carry/Borrow flag */
+
+#define BPSW_REGNUM	(CREGS_START + 1) /* Backup PSW (on interrupt) */
+#define PC_REGNUM 	(CREGS_START + 2) /* pc, bpc, or dpc??? */
+#define BPC_REGNUM 	(CREGS_START + 3) /* Backup PC (on interrupt) */
+#define DPSW_REGNUM	(CREGS_START + 4) /* Backup PSW (on debug trap) */
+#define DPC_REGNUM 	(CREGS_START + 5) /* Backup PC (on debug trap) */
+#define RPT_C_REGNUM	(CREGS_START + 7) /* Loop count */
+#define RPT_S_REGNUM	(CREGS_START + 8) /* Loop start address*/
+#define RPT_E_REGNUM	(CREGS_START + 9) /* Loop end address */
+#define MOD_S_REGNUM	(CREGS_START + 10)
+#define MOD_E_REGNUM	(CREGS_START + 11)
+#define IBA_REGNUM	(CREGS_START + 14) /* Instruction break address */
+#define EIT_VB_REGNUM	(CREGS_START + 15) /* Vector base address */
+#define INT_S_REGNUM	(CREGS_START + 16) /* Interrupt status */
+#define INT_M_REGNUM	(CREGS_START + 17) /* Interrupt mask */
+#define A0_REGNUM 	84
+#define A1_REGNUM 	85
+
+/* Say how much memory is needed to store a copy of the register set */
+#define REGISTER_BYTES    ((NUM_REGS - 2) * 4 + 2 * 8) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  \
+( ((N) >= A0_REGNUM) ? ( ((N) - A0_REGNUM) * 8 + A0_REGNUM * 4 ) : ((N) * 4) )
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) ( ((N) >= A0_REGNUM) ? 8 : 4 )
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */   
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+( ((N) < A0_REGNUM ) ? builtin_type_long : builtin_type_long_long)
+
+/* Writing to r0 is a noop (not an error or exception or anything like
+   that, however).  */
+
+#define CANNOT_STORE_REGISTER(regno) ((regno) == R0_REGNUM)
+
+void d30v_do_registers_info PARAMS ((int regnum, int fpregs));
+
+#define DO_REGISTERS_INFO d30v_do_registers_info
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. 
+
+   We store structs through a pointer passed in R2 */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    { write_register (2, (ADDR));  }
+
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  
+
+   Things always get returned in R2/R3 */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(2), VALBUF, TYPE_LENGTH (TYPE))
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (((CORE_ADDR *)(REGBUF))[2])
+
+
+/* Define other aspects of the stack frame. 
+   we keep a copy of the worked out return pc lying around, since it
+   is a useful bit of info */
+
+#define EXTRA_FRAME_INFO \
+    CORE_ADDR return_pc; \
+    CORE_ADDR dummy; \
+    int frameless; \
+    int size;
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+    d30v_init_extra_frame_info(fromleaf, fi) 
+
+extern void d30v_init_extra_frame_info PARAMS (( int fromleaf, struct frame_info *fi ));
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_CHAIN(FRAME)       d30v_frame_chain(FRAME)
+extern int d30v_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define FRAME_CHAIN_VALID(chain, thisframe) d30v_frame_chain_valid (chain, thisframe)
+#define FRAME_SAVED_PC(FRAME)    ((FRAME)->return_pc)   
+#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+#define INIT_FRAME_PC_FIRST(fromleaf, prev)	d30v_init_frame_pc(fromleaf, prev)
+#define INIT_FRAME_PC(fromleaf, prev)	/* nada */
+
+/* Immediately after a function call, return the saved pc.  We can't */
+/* use frame->return_pc beause that is determined by reading R62 off the */
+/* stack and that may not be written yet. */
+
+#define SAVED_PC_AFTER_CALL(frame) (read_register(LR_REGNUM))
+    
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+/* We can't tell how many args there are */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   d30v_frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+extern void d30v_frame_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *));
+
+#define NAMES_HAVE_UNDERSCORE
+      
+/* DUMMY FRAMES.  Need these to support inferior function calls.
+   They work like this on D30V:
+   First we set a breakpoint at 0 or __start.
+   Then we push all the registers onto the stack.
+   Then put the function arguments in the proper registers and set r13
+   to our breakpoint address.
+   Finally call the function directly.
+   When it hits the breakpoint, clear the break point and pop the old
+   register contents off the stack. */
+
+#define CALL_DUMMY		{ 0 }  
+#define PUSH_DUMMY_FRAME
+#define CALL_DUMMY_START_OFFSET	0	
+#define CALL_DUMMY_LOCATION	AT_ENTRY_POINT
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+
+extern CORE_ADDR d30v_call_dummy_address PARAMS ((void));
+#define CALL_DUMMY_ADDRESS() d30v_call_dummy_address()
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+sp = d30v_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address)	( pc == IMEM_START + 4 )
+
+extern CORE_ADDR d30v_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR,
+					   int, struct value **,
+					   struct type *, int));
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = d30v_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR d30v_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+d30v_extract_return_value(TYPE, REGBUF, VALBUF)
+  extern void
+d30v_extract_return_value PARAMS ((struct type *, char *, char *));
+
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+#define POP_FRAME d30v_pop_frame();
+extern void d30v_pop_frame PARAMS((void));
+
+#define REGISTER_SIZE 4
+
+/* Need to handle SP special, as we need to select between spu and spi.  */
+#if 0				/* XXX until the simulator is fixed */
+#define TARGET_READ_SP() ((read_register (PSW_REGNUM) & PSW_SM) \
+			  ? read_register (SPU_REGNUM) \
+			  : read_register (SPI_REGNUM))
+
+#define TARGET_WRITE_SP(val) ((read_register (PSW_REGNUM) & PSW_SM) \
+			  ? write_register (SPU_REGNUM, (val)) \
+			  : write_register (SPI_REGNUM, (val)))
+#endif
+
+#define STACK_ALIGN(len)	(((len) + 7 ) & ~7)
+
+/* Turn this on to cause remote-sim.c to use sim_set/clear_breakpoint. */
+
+#define SIM_HAS_BREAKPOINTS
+
+#endif /* TM_D30V_H */
diff --git a/gdb/config/fr30/fr30.mt b/gdb/config/fr30/fr30.mt
new file mode 100644
index 0000000..fac307e
--- /dev/null
+++ b/gdb/config/fr30/fr30.mt
@@ -0,0 +1,5 @@
+# Target: Fujitsu FR30 processor
+TDEPFILES= fr30-tdep.o
+TM_FILE= tm-fr30.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/fr30/libsim.a
diff --git a/gdb/config/fr30/tm-fr30.h b/gdb/config/fr30/tm-fr30.h
new file mode 100644
index 0000000..ea32792
--- /dev/null
+++ b/gdb/config/fr30/tm-fr30.h
@@ -0,0 +1,232 @@
+/* Parameters for execution on a Fujitsu FR30 processor.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define FR30_GENREGS		16
+#define FR30_DEDICATEDREGS	8
+#define FR30_REGSIZE		4	/* bytes */
+
+#define NUM_REGS (FR30_GENREGS + FR30_DEDICATEDREGS)
+#define REGISTER_BYTES ((FR30_GENREGS + FR30_DEDICATEDREGS)*FR30_REGSIZE)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+#define REGISTER_BYTE(N) ((N) * FR30_REGSIZE)
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+#define REGISTER_NAMES \
+{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", \
+  "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
+  "pc", "ps", "tbr", "rp", "ssp", "usp", "mdh", "mdl" }
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+#define FUNCTION_START_OFFSET 0
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+#define R0_REGNUM  0
+#define R1_REGNUM  1
+#define R2_REGNUM  2
+#define R3_REGNUM  3
+#define R4_REGNUM  4
+#define R5_REGNUM  5
+#define R6_REGNUM  6
+#define R7_REGNUM  7
+#define R8_REGNUM  8
+#define R9_REGNUM  9
+#define R10_REGNUM  10
+#define R11_REGNUM  11
+#define R12_REGNUM  12
+#define R13_REGNUM  13
+#define FP_REGNUM 14		/* Frame pointer */
+#define SP_REGNUM 15		/* Stack pointer */
+#define PC_REGNUM 16		/* Program counter */
+#define RP_REGNUM 19		/* Return pointer */
+
+#define FIRST_ARGREG	R4_REGNUM	/* first arg (or struct ret val addr) */
+#define LAST_ARGREG	R7_REGNUM	/* fourth (or third arg) */
+#define RETVAL_REG	R4_REGNUM	/* return vaue */
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+#define REGISTER_SIZE FR30_REGSIZE
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+#define REGISTER_RAW_SIZE(N) FR30_REGSIZE
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+#define MAX_REGISTER_RAW_SIZE FR30_REGSIZE 
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+#define MAX_REGISTER_VIRTUAL_SIZE FR30_REGSIZE
+
+extern void fr30_pop_frame PARAMS ((void));
+#define POP_FRAME fr30_pop_frame()
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+#define PUSH_RETURN_ADDRESS(PC, SP)  (write_register(RP_REGNUM, CALL_DUMMY_ADDRESS()), SP)
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+
+/* Number of bytes at start of arglist that are not really args.  */
+#define FRAME_ARGS_SKIP 0
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+    memcpy (VALBUF, REGBUF + REGISTER_BYTE(RETVAL_REG) +  \
+	(TYPE_LENGTH(TYPE) < 4 ? 4 - TYPE_LENGTH(TYPE) : 0), TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  extract_address (REGBUF + REGISTER_BYTE (RETVAL_REG), \
+		   REGISTER_RAW_SIZE (RETVAL_REG))
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (RETVAL_REG, (ADDR)); }
+
+#define FRAME_ARGS_ADDRESS(fi) (fi->frame)
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+#define FRAME_NUM_ARGS(numargs, fi) (numargs = -1)
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct frame_info;
+struct frame_saved_regs;
+struct type;
+struct value;
+#endif
+
+#define EXTRA_FRAME_INFO \
+  struct frame_saved_regs fsr;  \
+  int framesize;		\
+  int frameoffset;		\
+  int framereg;
+
+extern CORE_ADDR fr30_frame_chain PARAMS ((struct frame_info *fi));
+#define FRAME_CHAIN(fi) fr30_frame_chain (fi)
+
+extern CORE_ADDR fr30_frame_saved_pc   PARAMS ((struct frame_info *));
+#define FRAME_SAVED_PC(fi) (fr30_frame_saved_pc (fi))
+
+#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
+
+extern CORE_ADDR fr30_skip_prologue PARAMS ((CORE_ADDR pc));
+#define SKIP_PROLOGUE(pc) pc = fr30_skip_prologue (pc)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr
+
+/* Use INT #BREAKPOINT_INTNUM instruction for breakpoint */
+#define FR30_BREAKOP	0x1f	/* opcode, type D instruction */
+#define BREAKPOINT_INTNUM 9	/* one of the reserved traps */
+#define BREAKPOINT {FR30_BREAKOP, BREAKPOINT_INTNUM}
+
+/* Define this for Wingdb */
+#define TARGET_FR30
+
+/* IEEE format floating point */
+#define IEEE_FLOAT
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+{							\
+  CORE_ADDR func_start, after_prologue;			\
+  func_start = (get_pc_function_start ((FI)->pc) +	\
+		FUNCTION_START_OFFSET);			\
+  after_prologue = func_start;				\
+  SKIP_PROLOGUE (after_prologue);			\
+  (FRAMELESS) = (after_prologue == func_start);		\
+}
+
+extern void fr30_init_extra_frame_info PARAMS ((struct frame_info *fi));
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) fr30_init_extra_frame_info (fi)
+
+#define FRAME_CHAIN_VALID(FP, FI)	generic_frame_chain_valid (FP, FI)
+
+extern CORE_ADDR
+fr30_push_arguments PARAMS ((int nargs, struct value **args, CORE_ADDR sp,
+			     int struct_return,
+			     CORE_ADDR struct_addr));
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = fr30_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+
+/* Fujitsu's ABI requires all structs to be passed using a pointer.
+   That is obviously not very efficient, so I am leaving the definitions
+   to make gdb work with GCC style struct passing, in case we decide
+   to go for better performance, rather than for compatibility with
+   Fujitsu (just change STRUCT_ALWAYS_BY_ADDR to 0) */
+
+#define STRUCT_ALWAYS_BY_ADDR	1
+
+#if(STRUCT_ALWAYS_BY_ADDR)
+#define REG_STRUCT_HAS_ADDR(gcc_p,type)		1
+#else
+/* more standard GCC (optimized) */
+#define REG_STRUCT_HAS_ADDR(gcc_p,type)		\
+		((TYPE_LENGTH(type) > 4) && (TYPE_LENGTH(type) & 0x3))
+#endif
+/* alway return struct by value by input pointer */
+#define USE_STRUCT_CONVENTION(GCC_P, TYPE)	1
diff --git a/gdb/config/gould/np1.mh b/gdb/config/gould/np1.mh
new file mode 100644
index 0000000..322f207
--- /dev/null
+++ b/gdb/config/gould/np1.mh
@@ -0,0 +1,3 @@
+# OBSOLETE # Host: Gould NP1
+# OBSOLETE XDEPFILES= infptrace.o inftarg.o fork-child.o gould-xdep.o
+# OBSOLETE XM_FILE= xm-np1.h
diff --git a/gdb/config/gould/np1.mt b/gdb/config/gould/np1.mt
new file mode 100644
index 0000000..4ea2da5
--- /dev/null
+++ b/gdb/config/gould/np1.mt
@@ -0,0 +1,3 @@
+# OBSOLETE # Target: Gould NP1
+# OBSOLETE TDEPFILES= gould-tdep.o
+# OBSOLETE TM_FILE= tm-np1.h
diff --git a/gdb/config/gould/pn.mh b/gdb/config/gould/pn.mh
new file mode 100644
index 0000000..9d69f90
--- /dev/null
+++ b/gdb/config/gould/pn.mh
@@ -0,0 +1,3 @@
+# OBSOLETE # Host: Gould Powernode
+# OBSOLETE XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+# OBSOLETE XM_FILE= xm-pn.h
diff --git a/gdb/config/gould/pn.mt b/gdb/config/gould/pn.mt
new file mode 100644
index 0000000..7f73fc9
--- /dev/null
+++ b/gdb/config/gould/pn.mt
@@ -0,0 +1,3 @@
+# OBSOLETE # Target: Gould Powernode
+# OBSOLETE TDEPFILES= gould-tdep.o
+# OBSOLETE TM_FILE= tm-pn.h
diff --git a/gdb/config/gould/tm-np1.h b/gdb/config/gould/tm-np1.h
new file mode 100644
index 0000000..7287155
--- /dev/null
+++ b/gdb/config/gould/tm-np1.h
@@ -0,0 +1,490 @@
+/* OBSOLETE /* Parameters for targeting on a Gould NP1, for GDB, the GNU debugger. */
+/* OBSOLETE    Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define GOULD_NPL */
+/* OBSOLETE  */
+/* OBSOLETE #define TARGET_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE  */
+/* OBSOLETE /* N_ENTRY appears in libraries on Gould machines. */
+/* OBSOLETE    Don't know what 0xa4 is; it's mentioned in stab.h */
+/* OBSOLETE    but only in the sdb symbol list.  *x/ */
+/* OBSOLETE #define IGNORE_SYMBOL(type) (type == N_ENTRY || type == 0xa4) */
+/* OBSOLETE  */
+/* OBSOLETE /* We don't want the extra gnu symbols on the machine; */
+/* OBSOLETE    they will interfere with the shared segment symbols.  *x/ */
+/* OBSOLETE #define NO_GNU_STABS */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for text-offset and data info (in NPL a.out format).  *x/ */
+/* OBSOLETE #define	TEXTINFO						\ */
+/* OBSOLETE         text_offset = N_TXTOFF (exec_coffhdr, exec_aouthdr);	\ */
+/* OBSOLETE         exec_data_offset = N_TXTOFF (exec_coffhdr, exec_aouthdr)\ */
+/* OBSOLETE                 + exec_aouthdr.a_text */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for number of symbol table entries *x/ */
+/* OBSOLETE #define NUMBER_OF_SYMBOLS					\ */
+/* OBSOLETE 	(coffhdr.f_nsyms) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for file-offset of symbol table (in NPL a.out format).  *x/ */
+/* OBSOLETE #define SYMBOL_TABLE_OFFSET					\ */
+/* OBSOLETE 	N_SYMOFF (coffhdr) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for file-offset of string table (in NPL a.out format).  *x/ */
+/* OBSOLETE #define STRING_TABLE_OFFSET					\ */
+/* OBSOLETE 	(N_STROFF (coffhdr)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to store the length of the string table data in INTO.  *x/ */
+/* OBSOLETE #define READ_STRING_TABLE_SIZE(INTO)				\ */
+/* OBSOLETE 	{ INTO = hdr.a_stsize; } */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to declare variables to hold the file's header data.  *x/ */
+/* OBSOLETE #define DECLARE_FILE_HEADERS  struct exec hdr;			\ */
+/* OBSOLETE 			      FILHDR coffhdr */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to read the header data from descriptor DESC and validate it. */
+/* OBSOLETE    NAME is the file name, for error messages.  *x/ */
+/* OBSOLETE #define READ_FILE_HEADERS(DESC, NAME)				\ */
+/* OBSOLETE { val = myread (DESC, &coffhdr, sizeof coffhdr);		\ */
+/* OBSOLETE   if (val < 0)							\ */
+/* OBSOLETE     perror_with_name (NAME);					\ */
+/* OBSOLETE   val = myread (DESC, &hdr, sizeof hdr);			\ */
+/* OBSOLETE   if (val < 0)							\ */
+/* OBSOLETE     perror_with_name (NAME);					\ */
+/* OBSOLETE   if (coffhdr.f_magic != GNP1MAGIC)				\ */
+/* OBSOLETE     error ("File \"%s\" not in coff executable format.", NAME);	\ */
+/* OBSOLETE   if (N_BADMAG (hdr))						\ */
+/* OBSOLETE     error ("File \"%s\" not in executable format.", NAME); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Define COFF and other symbolic names needed on NP1 *x/ */
+/* OBSOLETE #define	NS32GMAGIC	GNP1MAGIC */
+/* OBSOLETE #define	NS32SMAGIC	GPNMAGIC */
+/* OBSOLETE  */
+/* OBSOLETE /* Address of blocks in N_LBRAC and N_RBRAC symbols are absolute addresses, */
+/* OBSOLETE    not relative to start of source address.  *x/ */
+/* OBSOLETE #define BLOCK_ADDRESS_ABSOLUTE */
+/* OBSOLETE  */
+/* OBSOLETE /* Offset from address of function to start of its code. */
+/* OBSOLETE    Zero on most machines.  *x/ */
+/* OBSOLETE #define FUNCTION_START_OFFSET	8 */
+/* OBSOLETE  */
+/* OBSOLETE /* Advance PC across any function entry prologue instructions */
+/* OBSOLETE    to reach some "real" code.  One NPL we can have one two startup */
+/* OBSOLETE    sequences depending on the size of the local stack: */
+/* OBSOLETE  */
+/* OBSOLETE    Either: */
+/* OBSOLETE       "suabr b2, #" */
+/* OBSOLETE    of */
+/* OBSOLETE       "lil r4, #", "suabr b2, #(r4)" */
+/* OBSOLETE  */
+/* OBSOLETE    "lwbr b6, #", "stw r1, 8(b2)" */
+/* OBSOLETE    Optional "stwbr b3, c(b2)" */
+/* OBSOLETE    Optional "trr r2,r7"      (Gould first argument register passing) */
+/* OBSOLETE      or */
+/* OBSOLETE    Optional "stw r2,8(b3)"   (Gould first argument register passing) */
+/* OBSOLETE  *x/ */
+/* OBSOLETE #define SKIP_PROLOGUE(pc) { 						\ */
+/* OBSOLETE 	register int op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 	if ((op & 0xffff0000) == 0xFA0B0000) { 				\ */
+/* OBSOLETE 	    pc += 4;							\ */
+/* OBSOLETE 	    op = read_memory_integer ((pc), 4);				\ */
+/* OBSOLETE 	    if ((op & 0xffff0000) == 0x59400000) {			\ */
+/* OBSOLETE 		pc += 4;						\ */
+/* OBSOLETE 	        op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		if ((op & 0xffff0000) == 0x5F000000) {			\ */
+/* OBSOLETE 		    pc += 4;						\ */
+/* OBSOLETE 	            op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		    if (op == 0xD4820008) {				\ */
+/* OBSOLETE 		    	pc += 4;					\ */
+/* OBSOLETE 	            	op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 		    	if (op == 0x5582000C) {				\ */
+/* OBSOLETE 		    	    pc += 4;					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		            if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	        pc += 2;				\ */
+/* OBSOLETE 		            } else {					\ */
+/* OBSOLETE 	                        op = read_memory_integer ((pc), 4);	\ */
+/* OBSOLETE 		                if (op == 0xd5030008) {			\ */
+/* OBSOLETE 		    	            pc += 4;				\ */
+/* OBSOLETE 		                }					\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        } else {					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		            if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	        pc += 2;				\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    }							\ */
+/* OBSOLETE 		}							\ */
+/* OBSOLETE 	    }								\ */
+/* OBSOLETE 	} 								\ */
+/* OBSOLETE 	if ((op & 0xffff0000) == 0x59000000) { 				\ */
+/* OBSOLETE 	    pc += 4;							\ */
+/* OBSOLETE 	    op = read_memory_integer ((pc), 4);				\ */
+/* OBSOLETE 	    if ((op & 0xffff0000) == 0x5F000000) {			\ */
+/* OBSOLETE 		pc += 4;						\ */
+/* OBSOLETE 	        op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		if (op == 0xD4820008) {					\ */
+/* OBSOLETE 		    pc += 4;						\ */
+/* OBSOLETE 	            op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		    if (op == 0x5582000C) {				\ */
+/* OBSOLETE 		    	pc += 4;					\ */
+/* OBSOLETE 	                op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		        if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	    pc += 2;					\ */
+/* OBSOLETE 		        } else {					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 		            if (op == 0xd5030008) {			\ */
+/* OBSOLETE 		    	        pc += 4;				\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    } else {						\ */
+/* OBSOLETE 	                op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		        if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	    pc += 2;					\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    }							\ */
+/* OBSOLETE 		}							\ */
+/* OBSOLETE 	    }								\ */
+/* OBSOLETE 	} 								\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Immediately after a function call, return the saved pc. */
+/* OBSOLETE    Can't go through the frames for this because on some machines */
+/* OBSOLETE    the new frame is not set up until the new function executes */
+/* OBSOLETE    some instructions.  True on NPL! Return address is in R1. */
+/* OBSOLETE    The true return address is REALLY 4 past that location! *x/ */
+/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) \ */
+/* OBSOLETE 	(read_register(R1_REGNUM) + 4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Address of end of stack space.  *x/ */
+/* OBSOLETE #define STACK_END_ADDR 		0x7fffc000 */
+/* OBSOLETE  */
+/* OBSOLETE /* Stack grows downward.  *x/ */
+/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Sequence of bytes for breakpoint instruction. */
+/* OBSOLETE    This is padded out to the size of a machine word.  When it was just */
+/* OBSOLETE    {0x28, 0x09} it gave problems if hit breakpoint on returning from a */
+/* OBSOLETE    function call.  *x/ */
+/* OBSOLETE #define BREAKPOINT 		{0x28, 0x09, 0x0, 0x0} */
+/* OBSOLETE  */
+/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */
+/* OBSOLETE    This is often the number of bytes in BREAKPOINT */
+/* OBSOLETE    but not always.  *x/ */
+/* OBSOLETE #define DECR_PC_AFTER_BREAK	2 */
+/* OBSOLETE  */
+/* OBSOLETE /* Return 1 if P points to an invalid floating point value.  *x/ */
+/* OBSOLETE #define INVALID_FLOAT(p, len) 	((*(short *)p & 0xff80) == 0x8000) */
+/* OBSOLETE  */
+/* OBSOLETE /* Say how long (ordinary) registers are.  This is a piece of bogosity */
+/* OBSOLETE    used in push_word and a few other places; REGISTER_RAW_SIZE is the */
+/* OBSOLETE    real way to know how big a register is.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_SIZE 4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Size of bytes of vector register (NP1 only), 32 elements * sizeof(int) *x/ */
+/* OBSOLETE #define VR_SIZE			128 */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of machine registers *x/ */
+/* OBSOLETE #define NUM_REGS 		27 */
+/* OBSOLETE #define NUM_GEN_REGS		16 */
+/* OBSOLETE #define NUM_CPU_REGS		4 */
+/* OBSOLETE #define NUM_VECTOR_REGS		7 */
+/* OBSOLETE  */
+/* OBSOLETE /* Initializer for an array of names of registers. */
+/* OBSOLETE    There should be NUM_REGS strings in this initializer.  *x/ */
+/* OBSOLETE #define REGISTER_NAMES { \ */
+/* OBSOLETE   "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ */
+/* OBSOLETE   "b0", "b1", "b2", "b3", "b4", "b5", "b6", "b7", \ */
+/* OBSOLETE   "sp", "ps", "pc", "ve", \ */
+/* OBSOLETE   "v1", "v2", "v3", "v4", "v5", "v6", "v7", \ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Register numbers of various important registers. */
+/* OBSOLETE    Note that some of these values are "real" register numbers, */
+/* OBSOLETE    and correspond to the general registers of the machine, */
+/* OBSOLETE    and some are "phony" register numbers which are too large */
+/* OBSOLETE    to be actual register numbers as far as the user is concerned */
+/* OBSOLETE    but do serve to get the desired values when passed to read_register.  *x/ */
+/* OBSOLETE #define R1_REGNUM	1	/* Gr1 => return address of caller *x/ */
+/* OBSOLETE #define R2_REGNUM	2	/* Gr2 => return value from function *x/ */
+/* OBSOLETE #define R4_REGNUM	4	/* Gr4 => register save area *x/ */
+/* OBSOLETE #define R5_REGNUM	5	/* Gr5 => register save area *x/ */
+/* OBSOLETE #define R6_REGNUM	6	/* Gr6 => register save area *x/ */
+/* OBSOLETE #define R7_REGNUM	7	/* Gr7 => register save area *x/ */
+/* OBSOLETE #define B1_REGNUM	9	/* Br1 => start of this code routine *x/ */
+/* OBSOLETE #define SP_REGNUM	10	/* Br2 == (sp) *x/ */
+/* OBSOLETE #define AP_REGNUM	11	/* Br3 == (ap) *x/ */
+/* OBSOLETE #define FP_REGNUM 	16	/* A copy of Br2 saved in trap *x/ */
+/* OBSOLETE #define PS_REGNUM 	17	/* Contains processor status *x/ */
+/* OBSOLETE #define PC_REGNUM 	18	/* Contains program counter *x/ */
+/* OBSOLETE #define VE_REGNUM 	19	/* Vector end (user setup) register *x/ */
+/* OBSOLETE #define V1_REGNUM 	20	/* First vector register *x/ */
+/* OBSOLETE #define V7_REGNUM 	26	/* First vector register *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */
+/* OBSOLETE    register state, the array `registers'.  *x/ */
+/* OBSOLETE #define REGISTER_BYTES \ */
+/* OBSOLETE 	(NUM_GEN_REGS*4 + NUM_VECTOR_REGS*VR_SIZE + NUM_CPU_REGS*4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Index within `registers' of the first byte of the space for */
+/* OBSOLETE    register N.  *x/ */
+/* OBSOLETE #define REGISTER_BYTE(N)  \ */
+/* OBSOLETE 	(((N) < V1_REGNUM) ? ((N) * 4) : (((N) - V1_REGNUM) * VR_SIZE) + 80) */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of bytes of storage in the actual machine representation */
+/* OBSOLETE    for register N.  On the NP1, all normal regs are 4 bytes, but */
+/* OBSOLETE    the vector registers are VR_SIZE*4 bytes long. *x/ */
+/* OBSOLETE #define REGISTER_RAW_SIZE(N) \ */
+/* OBSOLETE 	(((N) < V1_REGNUM) ? 4 : VR_SIZE) */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of bytes of storage in the program's representation */
+/* OBSOLETE    for register N.  On the NP1, all regs are 4 bytes. *x/ */
+/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N) \ */
+/* OBSOLETE 	(((N) < V1_REGNUM) ? 4 : VR_SIZE) */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have.  *x/ */
+/* OBSOLETE #define MAX_REGISTER_RAW_SIZE		VR_SIZE */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have.  *x/ */
+/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE	VR_SIZE */
+/* OBSOLETE  */
+/* OBSOLETE /* Return the GDB type object for the "standard" data type */
+/* OBSOLETE    of data in register N.  *x/ */
+/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N)	\ */
+/* OBSOLETE   ((N) > VE_REGNUM ? builtin_type_np1_vector : builtin_type_int) */
+/* OBSOLETE extern struct type *builtin_type_np1_vector; */
+/* OBSOLETE  */
+/* OBSOLETE /* Store the address of the place in which to copy the structure the */
+/* OBSOLETE    subroutine will return.  This is called from call_function. */
+/* OBSOLETE  */
+/* OBSOLETE    On this machine this is a no-op, because gcc isn't used on it */
+/* OBSOLETE    yet.  So this calling convention is not used. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) push_word(SP + 8, ADDR) */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an arrary REGBUF containing the (raw) register state */
+/* OBSOLETE    a function return value of type TYPE, and copy that, in virtual format, */
+/* OBSOLETE    into VALBUF. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */
+/* OBSOLETE 	memcpy (VALBUF, ((int *)(REGBUF)) + 2, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Write into appropriate registers a function return value */
+/* OBSOLETE    of type TYPE, given in virtual format.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */
+/* OBSOLETE 	write_register_bytes (REGISTER_BYTE (R2_REGNUM), VALBUF,      \ */
+/* OBSOLETE 			      TYPE_LENGTH (TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE    the address in which a function should return its structure value, */
+/* OBSOLETE    as a CORE_ADDR (or an expression that can be used as one).  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*((int *)(REGBUF) + 2)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Both gcc and cc return small structs in registers (i.e. in GDB */
+/* OBSOLETE    terminology, small structs don't use the struct return convention).  *x/ */
+/* OBSOLETE extern use_struct_convention_fn gould_use_struct_convention; */
+/* OBSOLETE #define USE_STRUCT_CONVENTION(gcc_p, type) gould_use_struct_convention (gcc_p, type) */
+/* OBSOLETE  */
+/* OBSOLETE /* Describe the pointer in each stack frame to the previous stack frame */
+/* OBSOLETE    (its caller).  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* FRAME_CHAIN takes a frame's nominal address */
+/* OBSOLETE    and produces the frame's chain-pointer. */
+/* OBSOLETE  */
+/* OBSOLETE    However, if FRAME_CHAIN_VALID returns zero, */
+/* OBSOLETE    it means the given frame is the outermost one and has no caller.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* In the case of the NPL, the frame's norminal address is Br2 and the  */
+/* OBSOLETE    previous routines frame is up the stack X bytes, where X is the */
+/* OBSOLETE    value stored in the code function header xA(Br1). *x/ */
+/* OBSOLETE #define FRAME_CHAIN(thisframe)		(findframe(thisframe)) */
+/* OBSOLETE  */
+/* OBSOLETE extern int gould_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); */
+/* OBSOLETE #define FRAME_CHAIN_VALID(chain, thisframe) gould_frame_chain_valid (chain, thisframe) */
+/* OBSOLETE  */
+/* OBSOLETE /* Define other aspects of the stack frame on NPL.  *x/ */
+/* OBSOLETE #define FRAME_SAVED_PC(FRAME) \ */
+/* OBSOLETE 	(read_memory_integer ((FRAME)->frame + 8, 4)) */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) \ */
+/* OBSOLETE 	((fi)->next ? \ */
+/* OBSOLETE 	 read_memory_integer ((fi)->frame + 12, 4) : \ */
+/* OBSOLETE 	 read_register (AP_REGNUM)) */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi)	((fi)->frame) */
+/* OBSOLETE  */
+/* OBSOLETE /* Set VAL to the number of args passed to frame described by FI. */
+/* OBSOLETE    Can set VAL to -1, meaning no way to tell.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* We can check the stab info to see how */
+/* OBSOLETE    many arg we have.  No info in stack will tell us *x/ */
+/* OBSOLETE #define FRAME_NUM_ARGS(val,fi)		(val = findarg(fi)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Return number of bytes at start of arglist that are not really args.  *x/ */
+/* OBSOLETE #define FRAME_ARGS_SKIP			8 */
+/* OBSOLETE  */
+/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */
+/* OBSOLETE    the addresses of the saved registers of frame described by FRAME_INFO. */
+/* OBSOLETE    This includes special registers such as pc and fp saved in special */
+/* OBSOLETE    ways in the stack frame.  sp is even more special: */
+/* OBSOLETE    the address we return for it IS the sp for the next frame.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)		\ */
+/* OBSOLETE {                                                                       \ */
+/* OBSOLETE   memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);			\ */
+/* OBSOLETE   (frame_saved_regs).regs[SP_REGNUM] = framechain (frame_info);         \ */
+/* OBSOLETE   (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 8;		\ */
+/* OBSOLETE   (frame_saved_regs).regs[R4_REGNUM] = (frame_info)->frame + 0x30;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R5_REGNUM] = (frame_info)->frame + 0x34;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R6_REGNUM] = (frame_info)->frame + 0x38;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R7_REGNUM] = (frame_info)->frame + 0x3C;	\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Things needed for making the inferior call functions.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_LOCATION	BEFORE_TEXT_END */
+/* OBSOLETE #define	NEED_TEXT_START_END 1 */
+/* OBSOLETE  */
+/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define PUSH_DUMMY_FRAME \ */
+/* OBSOLETE { register CORE_ADDR sp = read_register (SP_REGNUM); \ */
+/* OBSOLETE   register int regnum;                               \ */
+/* OBSOLETE   for (regnum = 0; regnum < FP_REGNUM; regnum++)     \ */
+/* OBSOLETE     sp = push_word (sp, read_register (regnum));     \ */
+/* OBSOLETE   sp = push_word (sp, read_register (PS_REGNUM));    \ */
+/* OBSOLETE   sp = push_word (sp, read_register (PC_REGNUM));    \ */
+/* OBSOLETE   write_register (SP_REGNUM, sp);} */
+/* OBSOLETE  */
+/* OBSOLETE /* Discard from the stack the innermost frame,  */
+/* OBSOLETE    restoring all saved registers.  *x/ */
+/* OBSOLETE /* FIXME: Should be using {store,extract}_unsigned_integer.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define POP_FRAME  \ */
+/* OBSOLETE { CORE_ADDR sp = read_register(SP_REGNUM);             \ */
+/* OBSOLETE   ULONGEST reg;                                   \ */
+/* OBSOLETE   int regnum;                                          \ */
+/* OBSOLETE   for(regnum = 0;regnum < FP_REGNUM;regnum++){         \ */
+/* OBSOLETE     sp-=REGISTER_SIZE;                         \ */
+/* OBSOLETE     read_memory(sp,&reg,REGISTER_SIZE);        \ */
+/* OBSOLETE     write_register(regnum,reg);}                       \ */
+/* OBSOLETE   sp-=REGISTER_SIZE;                           \ */
+/* OBSOLETE   read_memory(sp,&reg,REGISTER_SIZE);          \ */
+/* OBSOLETE   write_register(PS_REGNUM,reg);                       \ */
+/* OBSOLETE   sp-=REGISTER_SIZE;                           \ */
+/* OBSOLETE   read_memory(sp,&reg,REGISTER_SIZE);          \ */
+/* OBSOLETE   write_register(PC_REGNUM,reg);} */
+/* OBSOLETE  */
+/* OBSOLETE /* MJD - Size of dummy frame pushed onto stack by PUSH_DUMMY_FRAME *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define DUMMY_FRAME_SIZE (0x48) */
+/* OBSOLETE  */
+/* OBSOLETE /* MJD - The sequence of words in the instructions is */
+/* OBSOLETE    halt */
+/* OBSOLETE    halt */
+/* OBSOLETE    halt */
+/* OBSOLETE    halt */
+/* OBSOLETE    subr    b2,stack size,0             grab stack space for dummy call */
+/* OBSOLETE    labr    b3,x0(b2),0                 set AP_REGNUM to point at arguments */
+/* OBSOLETE    lw      r2,x8(b3),0                 load r2 with first argument     */
+/* OBSOLETE    lwbr    b1,arguments size(b2),0     load address of function to be called */
+/* OBSOLETE    brlnk   r1,x8(b1),0                 call function */
+/* OBSOLETE    halt */
+/* OBSOLETE    halt */
+/* OBSOLETE    labr    b2,stack size(b2),0         give back stack */
+/* OBSOLETE    break                               break */
+/* OBSOLETE    *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY {0x00000000,  \ */
+/* OBSOLETE 		    0x00000000,  \ */
+/* OBSOLETE 		    0x59000000,  \ */
+/* OBSOLETE 		    0x598a0000,  \ */
+/* OBSOLETE 		    0xb5030008,  \ */
+/* OBSOLETE 		    0x5c820000,  \ */
+/* OBSOLETE 		    0x44810008,  \ */
+/* OBSOLETE 		    0x00000000,  \ */
+/* OBSOLETE 		    0x590a0000,  \ */
+/* OBSOLETE 		    0x28090000 } */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_LENGTH 40 */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_START_OFFSET 8 */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_STACK_ADJUST 8 */
+/* OBSOLETE  */
+/* OBSOLETE /* MJD - Fixup CALL_DUMMY for the specific function call. */
+/* OBSOLETE    OK heres the problems */
+/* OBSOLETE    1) On a trap there are two copies of the stack pointer, one in SP_REGNUM */
+/* OBSOLETE       which is read/write and one in FP_REGNUM which is only read. It seems */
+/* OBSOLETE       that when restarting the GOULD NP1 uses FP_REGNUM's value. */
+/* OBSOLETE    2) Loading function address into b1 looks a bit difficult if bigger than */
+/* OBSOLETE       0x0000fffc, infact from what I can tell the compiler sets up table of */
+/* OBSOLETE       function address in base3 through which function calls are referenced. */
+/* OBSOLETE  */
+/* OBSOLETE    OK my solutions */
+/* OBSOLETE      Calculate the size of the dummy stack frame and do adjustments of */
+/* OBSOLETE      SP_REGNUM in the dummy call. */
+/* OBSOLETE      Push function address onto the stack and load it in the dummy call */
+/* OBSOLETE  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, sp, fun, nargs, args, type, gcc_p) \ */
+/* OBSOLETE   {   int i;\ */
+/* OBSOLETE       int arg_len = 0, total_len;\ */
+/* OBSOLETE       old_sp = push_word(old_sp,fun);\ */
+/* OBSOLETE       for(i = nargs - 1;i >= 0;i--)\ */
+/* OBSOLETE 	arg_len += TYPE_LENGTH (VALUE_TYPE (value_arg_coerce (args[i])));\ */
+/* OBSOLETE       if(struct_return)\ */
+/* OBSOLETE 	arg_len += TYPE_LENGTH(value_type);\ */
+/* OBSOLETE       total_len = DUMMY_FRAME_SIZE+CALL_DUMMY_STACK_ADJUST+4+arg_len;\ */
+/* OBSOLETE       dummyname[0] += total_len;\ */
+/* OBSOLETE       dummyname[2] += total_len;\ */
+/* OBSOLETE       dummyname[5] += arg_len+CALL_DUMMY_STACK_ADJUST;\ */
+/* OBSOLETE       dummyname[8] += total_len;} */
+/* OBSOLETE  */
+/* OBSOLETE /* MJD - So the stack should end up looking like this */
+/* OBSOLETE  */
+/* OBSOLETE                    | Normal stack frame  | */
+/* OBSOLETE                    | from normal program | */
+/* OBSOLETE                    | flow                | */
+/* OBSOLETE                    +---------------------+ <- Final sp - 0x08 - argument size */
+/* OBSOLETE                    |                     |    - 0x4 - dummy_frame_size */
+/* OBSOLETE                    | Pushed dummy frame  | */
+/* OBSOLETE                    |  b0-b7, r0-r7       | */
+/* OBSOLETE                    |  pc and ps          | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    +---------------------+ */
+/* OBSOLETE                    | Function address    | */
+/* OBSOLETE                    +---------------------+ <- Final sp - 0x8 - arguments size */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    |  Arguments to       | */
+/* OBSOLETE                    |       Function      | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    +---------------------+ <- Final sp - 0x8 */
+/* OBSOLETE                    | Dummy_stack_adjust  | */
+/* OBSOLETE                    +---------------------+ <- Final sp */
+/* OBSOLETE                    |                     | */
+/* OBSOLETE                    | where call will     | */
+/* OBSOLETE                    |   build frame       | */
+/* OBSOLETE *x/ */
diff --git a/gdb/config/gould/tm-pn.h b/gdb/config/gould/tm-pn.h
new file mode 100644
index 0000000..b44d4ee
--- /dev/null
+++ b/gdb/config/gould/tm-pn.h
@@ -0,0 +1,409 @@
+/* OBSOLETE /* Parameters for targe of a Gould Powernode, for GDB, the GNU debugger. */
+/* OBSOLETE    Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define GOULD_PN */
+/* OBSOLETE  */
+/* OBSOLETE #define TARGET_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE  */
+/* OBSOLETE /* This code appears in libraries on Gould machines.  Ignore it. *x/ */
+/* OBSOLETE #define IGNORE_SYMBOL(type) (type == N_ENTRY) */
+/* OBSOLETE  */
+/* OBSOLETE /* We don't want the extra gnu symbols on the machine; */
+/* OBSOLETE    they will interfere with the shared segment symbols.  *x/ */
+/* OBSOLETE #define NO_GNU_STABS */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for text-offset and data info (in PN a.out format).  *x/ */
+/* OBSOLETE #define	TEXTINFO						\ */
+/* OBSOLETE 	text_offset = N_TXTOFF (exec_coffhdr);			\ */
+/* OBSOLETE 	exec_data_offset = N_TXTOFF (exec_coffhdr)		\ */
+/* OBSOLETE 		+ exec_aouthdr.a_text */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for number of symbol table entries (this used to be checked */
+/* OBSOLETE    in dbxread.c and caused the last psymtab to use this as the end of */
+/* OBSOLETE    text.  I'm not sure whether it would still be necessary).  *x/ */
+/* OBSOLETE #define END_OF_TEXT_DEFAULT					\ */
+/* OBSOLETE 	(0xffffff) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for number of symbol table entries *x/ */
+/* OBSOLETE #define NUMBER_OF_SYMBOLS					\ */
+/* OBSOLETE 	(coffhdr.f_nsyms) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for file-offset of symbol table (in usual a.out format).  *x/ */
+/* OBSOLETE #define SYMBOL_TABLE_OFFSET					\ */
+/* OBSOLETE 	N_SYMOFF (coffhdr) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro for file-offset of string table (in usual a.out format).  *x/ */
+/* OBSOLETE #define STRING_TABLE_OFFSET					\ */
+/* OBSOLETE 	(N_STROFF (coffhdr) + sizeof(int)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to store the length of the string table data in INTO.  *x/ */
+/* OBSOLETE #define READ_STRING_TABLE_SIZE(INTO)				\ */
+/* OBSOLETE 	{ INTO = hdr.a_stsize; } */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to declare variables to hold the file's header data.  *x/ */
+/* OBSOLETE #define DECLARE_FILE_HEADERS  struct old_exec hdr;		\ */
+/* OBSOLETE 			      FILHDR coffhdr */
+/* OBSOLETE  */
+/* OBSOLETE /* Macro to read the header data from descriptor DESC and validate it. */
+/* OBSOLETE    NAME is the file name, for error messages.  *x/ */
+/* OBSOLETE #define READ_FILE_HEADERS(DESC, NAME)				\ */
+/* OBSOLETE { val = myread (DESC, &coffhdr, sizeof coffhdr);		\ */
+/* OBSOLETE   if (val < 0)							\ */
+/* OBSOLETE     perror_with_name (NAME);					\ */
+/* OBSOLETE   val = myread (DESC, &hdr, sizeof hdr);			\ */
+/* OBSOLETE   if (val < 0)							\ */
+/* OBSOLETE     perror_with_name (NAME);					\ */
+/* OBSOLETE   if (coffhdr.f_magic != GNP1MAGIC)				\ */
+/* OBSOLETE     error ("File \"%s\" not in coff executable format.", NAME);	\ */
+/* OBSOLETE   if (N_BADMAG (hdr))						\ */
+/* OBSOLETE     error ("File \"%s\" not in executable format.", NAME); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Define COFF and other symbolic names needed on NP1 *x/ */
+/* OBSOLETE #define	NS32GMAGIC	GDPMAGIC */
+/* OBSOLETE #define	NS32SMAGIC	PN_MAGIC */
+/* OBSOLETE  */
+/* OBSOLETE /* Offset from address of function to start of its code. */
+/* OBSOLETE    Zero on most machines.  *x/ */
+/* OBSOLETE #define FUNCTION_START_OFFSET	4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Advance PC across any function entry prologue instructions */
+/* OBSOLETE    to reach some "real" code.  One PN we can have one or two startup */
+/* OBSOLETE    sequences depending on the size of the local stack: */
+/* OBSOLETE  */
+/* OBSOLETE    Either: */
+/* OBSOLETE       "suabr b2, #" */
+/* OBSOLETE    of */
+/* OBSOLETE       "lil r4, #", "suabr b2, #(r4)" */
+/* OBSOLETE  */
+/* OBSOLETE    "lwbr b6, #", "stw r1, 8(b2)" */
+/* OBSOLETE    Optional "stwbr b3, c(b2)" */
+/* OBSOLETE    Optional "trr r2,r7"      (Gould first argument register passing) */
+/* OBSOLETE      or */
+/* OBSOLETE    Optional "stw r2,8(b3)"   (Gould first argument register passing) */
+/* OBSOLETE  *x/ */
+/* OBSOLETE #define SKIP_PROLOGUE(pc) { 						\ */
+/* OBSOLETE 	register int op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 	if ((op & 0xffff0000) == 0x580B0000) { 				\ */
+/* OBSOLETE 	    pc += 4;							\ */
+/* OBSOLETE 	    op = read_memory_integer ((pc), 4);				\ */
+/* OBSOLETE 	    if ((op & 0xffff0000) == 0x59400000) {			\ */
+/* OBSOLETE 		pc += 4;						\ */
+/* OBSOLETE 	        op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		if ((op & 0xffff0000) == 0x5F000000) {			\ */
+/* OBSOLETE 		    pc += 4;						\ */
+/* OBSOLETE 	            op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		    if (op == 0xD4820008) {				\ */
+/* OBSOLETE 		    	pc += 4;					\ */
+/* OBSOLETE 	            	op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 		    	if (op == 0x5582000C) {				\ */
+/* OBSOLETE 		    	    pc += 4;					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		            if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	        pc += 2;				\ */
+/* OBSOLETE 		            } else {					\ */
+/* OBSOLETE 	                        op = read_memory_integer ((pc), 4);	\ */
+/* OBSOLETE 		                if (op == 0xd5030008) {			\ */
+/* OBSOLETE 		    	            pc += 4;				\ */
+/* OBSOLETE 		                }					\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        } else {					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		            if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	        pc += 2;				\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    }							\ */
+/* OBSOLETE 		}							\ */
+/* OBSOLETE 	    }								\ */
+/* OBSOLETE 	} 								\ */
+/* OBSOLETE 	if ((op & 0xffff0000) == 0x59000000) { 				\ */
+/* OBSOLETE 	    pc += 4;							\ */
+/* OBSOLETE 	    op = read_memory_integer ((pc), 4);				\ */
+/* OBSOLETE 	    if ((op & 0xffff0000) == 0x5F000000) {			\ */
+/* OBSOLETE 		pc += 4;						\ */
+/* OBSOLETE 	        op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		if (op == 0xD4820008) {					\ */
+/* OBSOLETE 		    pc += 4;						\ */
+/* OBSOLETE 	            op = read_memory_integer ((pc), 4);			\ */
+/* OBSOLETE 		    if (op == 0x5582000C) {				\ */
+/* OBSOLETE 		    	pc += 4;					\ */
+/* OBSOLETE 	                op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		        if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	    pc += 2;					\ */
+/* OBSOLETE 		        } else {					\ */
+/* OBSOLETE 	                    op = read_memory_integer ((pc), 4);		\ */
+/* OBSOLETE 		            if (op == 0xd5030008) {			\ */
+/* OBSOLETE 		    	        pc += 4;				\ */
+/* OBSOLETE 		            }						\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    } else {						\ */
+/* OBSOLETE 	                op = read_memory_integer ((pc), 2);		\ */
+/* OBSOLETE 		        if (op == 0x2fa0) {				\ */
+/* OBSOLETE 		    	    pc += 2;					\ */
+/* OBSOLETE 		        }						\ */
+/* OBSOLETE 		    }							\ */
+/* OBSOLETE 		}							\ */
+/* OBSOLETE 	    }								\ */
+/* OBSOLETE 	} 								\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Immediately after a function call, return the saved pc. */
+/* OBSOLETE    Can't go through the frames for this because on some machines */
+/* OBSOLETE    the new frame is not set up until the new function executes */
+/* OBSOLETE    some instructions.  True on PN!  Return address is in R1. */
+/* OBSOLETE    Note: true return location is 4 bytes past R1! *x/ */
+/* OBSOLETE #define SAVED_PC_AFTER_CALL(frame) \ */
+/* OBSOLETE 	(read_register(R1_REGNUM) + 4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Address of end of stack space.  *x/ */
+/* OBSOLETE #define STACK_END_ADDR 		0x480000 */
+/* OBSOLETE  */
+/* OBSOLETE /* Stack grows downward.  *x/ */
+/* OBSOLETE #define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Sequence of bytes for breakpoint instruction.  *x/ */
+/* OBSOLETE #define BREAKPOINT 		{0x28, 0x09} */
+/* OBSOLETE  */
+/* OBSOLETE /* Amount PC must be decremented by after a breakpoint. */
+/* OBSOLETE    This is often the number of bytes in BREAKPOINT */
+/* OBSOLETE    but not always.  *x/ */
+/* OBSOLETE #define DECR_PC_AFTER_BREAK	2 */
+/* OBSOLETE  */
+/* OBSOLETE /* Return 1 if P points to an invalid floating point value.  *x/ */
+/* OBSOLETE #define INVALID_FLOAT(p, len) 	((*(short *)p & 0xff80) == 0x8000) */
+/* OBSOLETE  */
+/* OBSOLETE /* Say how long (ordinary) registers are.  This is a piece of bogosity */
+/* OBSOLETE    used in push_word and a few other places; REGISTER_RAW_SIZE is the */
+/* OBSOLETE    real way to know how big a register is.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define REGISTER_SIZE 4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of machine registers *x/ */
+/* OBSOLETE #define NUM_REGS 		19 */
+/* OBSOLETE #define NUM_GEN_REGS		16 */
+/* OBSOLETE #define NUM_CPU_REGS		3 */
+/* OBSOLETE  */
+/* OBSOLETE /* Initializer for an array of names of registers. */
+/* OBSOLETE    There should be NUM_REGS strings in this initializer.  *x/ */
+/* OBSOLETE #define REGISTER_NAMES { \ */
+/* OBSOLETE   "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ */
+/* OBSOLETE   "b0", "b1", "b2", "b3", "b4", "b5", "b6", "b7", \ */
+/* OBSOLETE   "sp", "ps", "pc", \ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Register numbers of various important registers. */
+/* OBSOLETE    Note that some of these values are "real" register numbers, */
+/* OBSOLETE    and correspond to the general registers of the machine, */
+/* OBSOLETE    and some are "phony" register numbers which are too large */
+/* OBSOLETE    to be actual register numbers as far as the user is concerned */
+/* OBSOLETE    but do serve to get the desired values when passed to read_register.  *x/ */
+/* OBSOLETE #define R1_REGNUM	1	/* Gr1 => return address of caller *x/ */
+/* OBSOLETE #define R4_REGNUM	4	/* Gr4 => register save area *x/ */
+/* OBSOLETE #define R5_REGNUM	5	/* Gr5 => register save area *x/ */
+/* OBSOLETE #define R6_REGNUM	6	/* Gr6 => register save area *x/ */
+/* OBSOLETE #define R7_REGNUM	7	/* Gr7 => register save area *x/ */
+/* OBSOLETE #define B1_REGNUM	9	/* Br1 => start of this code routine *x/ */
+/* OBSOLETE #define FP_REGNUM	10	/* Br2 == (sp) *x/ */
+/* OBSOLETE #define AP_REGNUM	11	/* Br3 == (ap) *x/ */
+/* OBSOLETE #define SP_REGNUM 	16	/* A copy of Br2 saved in trap *x/ */
+/* OBSOLETE #define PS_REGNUM 	17	/* Contains processor status *x/ */
+/* OBSOLETE #define PC_REGNUM 	18	/* Contains program counter *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* Total amount of space needed to store our copies of the machine's */
+/* OBSOLETE    register state, the array `registers'.  *x/ */
+/* OBSOLETE #define REGISTER_BYTES			(NUM_GEN_REGS*4 + NUM_CPU_REGS*4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Index within `registers' of the first byte of the space for */
+/* OBSOLETE    register N.  *x/ */
+/* OBSOLETE #define REGISTER_BYTE(N)  		((N) * 4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of bytes of storage in the actual machine representation */
+/* OBSOLETE    for register N.  On the PN, all normal regs are 4 bytes. *x/ */
+/* OBSOLETE #define REGISTER_RAW_SIZE(N) 		(4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of bytes of storage in the program's representation */
+/* OBSOLETE    for register N.  On the PN, all regs are 4 bytes. *x/ */
+/* OBSOLETE #define REGISTER_VIRTUAL_SIZE(N)	(4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_RAW_SIZE can have.  *x/ */
+/* OBSOLETE #define MAX_REGISTER_RAW_SIZE		(4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Largest value REGISTER_VIRTUAL_SIZE can have.  *x/ */
+/* OBSOLETE #define MAX_REGISTER_VIRTUAL_SIZE	(4) */
+/* OBSOLETE  */
+/* OBSOLETE /* Return the GDB type object for the "standard" data type */
+/* OBSOLETE    of data in register N.  *x/ */
+/* OBSOLETE #define REGISTER_VIRTUAL_TYPE(N)	(builtin_type_int) */
+/* OBSOLETE  */
+/* OBSOLETE /* Store the address of the place in which to copy the structure the */
+/* OBSOLETE    subroutine will return.  This is called from call_function. */
+/* OBSOLETE  */
+/* OBSOLETE    On this machine this is a no-op, because gcc isn't used on it */
+/* OBSOLETE    yet.  So this calling convention is not used. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_STRUCT_RETURN(ADDR, SP) */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an arrary REGBUF containing the (raw) register state */
+/* OBSOLETE    a function return value of type TYPE, and copy that, in virtual format, */
+/* OBSOLETE    into VALBUF. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ */
+/* OBSOLETE 	memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Write into appropriate registers a function return value */
+/* OBSOLETE    of type TYPE, given in virtual format.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define STORE_RETURN_VALUE(TYPE,VALBUF) \ */
+/* OBSOLETE 	write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Extract from an array REGBUF containing the (raw) register state */
+/* OBSOLETE    the address in which a function should return its structure value, */
+/* OBSOLETE    as a CORE_ADDR (or an expression that can be used as one).  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF)) */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Describe the pointer in each stack frame to the previous stack frame */
+/* OBSOLETE    (its caller).  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* FRAME_CHAIN takes a frame's nominal address */
+/* OBSOLETE    and produces the frame's chain-pointer. */
+/* OBSOLETE  */
+/* OBSOLETE    However, if FRAME_CHAIN_VALID returns zero, */
+/* OBSOLETE    it means the given frame is the outermost one and has no caller.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* In the case of the NPL, the frame's norminal address is Br2 and the  */
+/* OBSOLETE    previous routines frame is up the stack X bytes, where X is the */
+/* OBSOLETE    value stored in the code function header xA(Br1). *x/ */
+/* OBSOLETE #define FRAME_CHAIN(thisframe)		(findframe(thisframe)) */
+/* OBSOLETE  */
+/* OBSOLETE extern int gould_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *)); */
+/* OBSOLETE #define FRAME_CHAIN_VALID(chain, thisframe) gould_frame_chain_valid (chain, thisframe) */
+/* OBSOLETE  */
+/* OBSOLETE /* Define other aspects of the stack frame on NPL.  *x/ */
+/* OBSOLETE #define FRAME_SAVED_PC(frame) \ */
+/* OBSOLETE 	(read_memory_integer ((frame)->frame + 8, 4)) */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_ARGS_ADDRESS(fi) \ */
+/* OBSOLETE 	((fi)->next ? \ */
+/* OBSOLETE 	 read_memory_integer ((fi)->frame + 12, 4) : \ */
+/* OBSOLETE 	 read_register (AP_REGNUM)) */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_LOCALS_ADDRESS(fi)	((fi)->frame + 80) */
+/* OBSOLETE  */
+/* OBSOLETE /* Set VAL to the number of args passed to frame described by FI. */
+/* OBSOLETE    Can set VAL to -1, meaning no way to tell.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* We can check the stab info to see how */
+/* OBSOLETE    many arg we have.  No info in stack will tell us *x/ */
+/* OBSOLETE #define FRAME_NUM_ARGS(val,fi)		(val = findarg(fi)) */
+/* OBSOLETE  */
+/* OBSOLETE /* Return number of bytes at start of arglist that are not really args.  *x/ */
+/* OBSOLETE #define FRAME_ARGS_SKIP			8 */
+/* OBSOLETE  */
+/* OBSOLETE /* Put here the code to store, into a struct frame_saved_regs, */
+/* OBSOLETE    the addresses of the saved registers of frame described by FRAME_INFO. */
+/* OBSOLETE    This includes special registers such as pc and fp saved in special */
+/* OBSOLETE    ways in the stack frame.  sp is even more special: */
+/* OBSOLETE    the address we return for it IS the sp for the next frame.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)		\ */
+/* OBSOLETE {                                                                       \ */
+/* OBSOLETE   memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);			\ */
+/* OBSOLETE   (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 8;		\ */
+/* OBSOLETE   (frame_saved_regs).regs[R4_REGNUM] = (frame_info)->frame + 0x30;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R5_REGNUM] = (frame_info)->frame + 0x34;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R6_REGNUM] = (frame_info)->frame + 0x38;	\ */
+/* OBSOLETE   (frame_saved_regs).regs[R7_REGNUM] = (frame_info)->frame + 0x3C;	\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Things needed for making the inferior call functions.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* Push an empty stack frame, to record the current PC, etc.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define PUSH_DUMMY_FRAME \ */
+/* OBSOLETE { register CORE_ADDR sp = read_register (SP_REGNUM);			\ */
+/* OBSOLETE   register int regnum;							\ */
+/* OBSOLETE   sp = push_word (sp, read_register (PC_REGNUM));			\ */
+/* OBSOLETE   sp = push_word (sp, read_register (FP_REGNUM));			\ */
+/* OBSOLETE   write_register (FP_REGNUM, sp);					\ */
+/* OBSOLETE   for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--)			\ */
+/* OBSOLETE     sp = push_word (sp, read_register (regnum));			\ */
+/* OBSOLETE   sp = push_word (sp, read_register (PS_REGNUM));			\ */
+/* OBSOLETE   write_register (SP_REGNUM, sp);  } */
+/* OBSOLETE  */
+/* OBSOLETE /* Discard from the stack the innermost frame,  */
+/* OBSOLETE    restoring all saved registers.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define POP_FRAME  \ */
+/* OBSOLETE { register struct frame_info *frame = get_current_frame ();	 \ */
+/* OBSOLETE   register CORE_ADDR fp;					 \ */
+/* OBSOLETE   register int regnum;						 \ */
+/* OBSOLETE   struct frame_saved_regs fsr;					 \ */
+/* OBSOLETE   struct frame_info *fi;					 \ */
+/* OBSOLETE   fp = frame->frame;						 \ */
+/* OBSOLETE   get_frame_saved_regs (frame, &fsr);				 \ */
+/* OBSOLETE   for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--)		 \ */
+/* OBSOLETE     if (fsr.regs[regnum])					 \ */
+/* OBSOLETE       write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \ */
+/* OBSOLETE   if (fsr.regs[PS_REGNUM])					 \ */
+/* OBSOLETE     write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4)); \ */
+/* OBSOLETE   write_register (FP_REGNUM, read_memory_integer (fp, 4));	 \ */
+/* OBSOLETE   write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));   \ */
+/* OBSOLETE   write_register (SP_REGNUM, fp + 8);				 \ */
+/* OBSOLETE   flush_cached_frames ();					 \ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* This sequence of words is the instructions: */
+/* OBSOLETE      halt */
+/* OBSOLETE      halt */
+/* OBSOLETE      halt */
+/* OBSOLETE      halt */
+/* OBSOLETE      suabr	b2, #<stacksize> */
+/* OBSOLETE      lwbr	b6, #con */
+/* OBSOLETE      stw	r1, 8(b2)	- save caller address, do we care? */
+/* OBSOLETE      lw		r2, 60(b2)	- arg1 */
+/* OBSOLETE      labr	b3, 50(b2) */
+/* OBSOLETE      std	r4, 30(b2)	- save r4-r7 */
+/* OBSOLETE      std	r6, 38(b2) */
+/* OBSOLETE      lwbr	b1, #<func>	- load function call address */
+/* OBSOLETE      brlnk	r1, 8(b1)	- call function */
+/* OBSOLETE      halt */
+/* OBSOLETE      halt */
+/* OBSOLETE      ld		r4, 30(b2)	- restore r4-r7 */
+/* OBSOLETE      ld		r6, 38(b2) */
+/* OBSOLETE  */
+/* OBSOLETE    Setup our stack frame, load argumemts, call and then restore registers. */
+/* OBSOLETE *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* FIXME:  The below defines an m68k CALL_DUMMY, which looks nothing like what */
+/* OBSOLETE    is documented above. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, 0x4e4f4e71} */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_LENGTH 28 */
+/* OBSOLETE  */
+/* OBSOLETE #define CALL_DUMMY_START_OFFSET 12 */
+/* OBSOLETE  */
+/* OBSOLETE /* Insert the specified number of args and function address */
+/* OBSOLETE    into a call sequence of the above form stored at DUMMYNAME.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)     \ */
+/* OBSOLETE { *(int *)((char *) dummyname + 20) = nargs * 4;  \ */
+/* OBSOLETE   *(int *)((char *) dummyname + 14) = fun; } */
diff --git a/gdb/config/gould/xm-np1.h b/gdb/config/gould/xm-np1.h
new file mode 100644
index 0000000..63bc450
--- /dev/null
+++ b/gdb/config/gould/xm-np1.h
@@ -0,0 +1,94 @@
+/* OBSOLETE /* Parameters for execution on a Gould NP1, for GDB, the GNU debugger. */
+/* OBSOLETE    Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE  */
+/* OBSOLETE /* Address of U in kernel space *x/ */
+/* OBSOLETE #define	KERNEL_U_ADDR		0x7fffc000 */
+/* OBSOLETE  */
+/* OBSOLETE /* This is a piece of magic that is given a register number REGNO */
+/* OBSOLETE    and as BLOCKEND the address in the system of the end of the user structure */
+/* OBSOLETE    and stores in ADDR the address in the kernel or core dump */
+/* OBSOLETE    of that register. *x/ */
+/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno) {			\ */
+/* OBSOLETE 	addr = blockend + regno * 4;					\ */
+/* OBSOLETE 	if (regno == VE_REGNUM) addr = blockend - 9 * 4;		\ */
+/* OBSOLETE 	if (regno == PC_REGNUM) addr = blockend - 8 * 4;		\ */
+/* OBSOLETE 	if (regno == PS_REGNUM) addr = blockend - 7 * 4;		\ */
+/* OBSOLETE 	if (regno == FP_REGNUM) addr = blockend - 6 * 4;		\ */
+/* OBSOLETE 	if (regno >= V1_REGNUM) 					\ */
+/* OBSOLETE 	    addr = blockend + 16 * 4 + (regno - V1_REGNUM) * VR_SIZE;	\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Don't try to write the frame pointer.  *x/ */
+/* OBSOLETE #define CANNOT_STORE_REGISTER(regno) ((regno) == FP_REGNUM) */
+/* OBSOLETE  */
+/* OBSOLETE /* */
+/* OBSOLETE  * No KDB support, Yet! *x/ */
+/* OBSOLETE /* Interface definitions for kernel debugger KDB.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* Map machine fault codes into signal numbers. */
+/* OBSOLETE    First subtract 0, divide by 4, then index in a table. */
+/* OBSOLETE    Faults for which the entry in this table is 0 */
+/* OBSOLETE    are not handled by KDB; the program's own trap handler */
+/* OBSOLETE    gets to handle then.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */
+/* OBSOLETE #define FAULT_CODE_UNITS 4 */
+/* OBSOLETE #define FAULT_TABLE    \ */
+/* OBSOLETE { 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ */
+/* OBSOLETE   0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ */
+/* OBSOLETE   0, 0, 0, 0, 0, 0, 0, 0, \ */
+/* OBSOLETE   SIGILL } */
+/* OBSOLETE  */
+/* OBSOLETE /* Start running with a stack stretching from BEG to END. */
+/* OBSOLETE    BEG and END should be symbols meaningful to the assembler. */
+/* OBSOLETE    This is used only for kdb.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define INIT_STACK(beg, end)  \ */
+/* OBSOLETE { asm (".globl end");         \ */
+/* OBSOLETE   asm ("movel $ end, sp");      \ */
+/* OBSOLETE   asm ("clrl fp"); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Push the frame pointer register on the stack.  *x/ */
+/* OBSOLETE #define PUSH_FRAME_PTR        \ */
+/* OBSOLETE   asm ("movel fp, -(sp)"); */
+/* OBSOLETE  */
+/* OBSOLETE /* Copy the top-of-stack to the frame pointer register.  *x/ */
+/* OBSOLETE #define POP_FRAME_PTR  \ */
+/* OBSOLETE   asm ("movl (sp), fp"); */
+/* OBSOLETE  */
+/* OBSOLETE /* After KDB is entered by a fault, push all registers */
+/* OBSOLETE    that GDB thinks about (all NUM_REGS of them), */
+/* OBSOLETE    so that they appear in order of ascending GDB register number. */
+/* OBSOLETE    The fault code will be on the stack beyond the last register.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define PUSH_REGISTERS        \ */
+/* OBSOLETE { asm ("clrw -(sp)");	      \ */
+/* OBSOLETE   asm ("pea 10(sp)");	      \ */
+/* OBSOLETE   asm ("movem $ 0xfffe,-(sp)"); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Assuming the registers (including processor status) have been */
+/* OBSOLETE    pushed on the stack in order of ascending GDB register number, */
+/* OBSOLETE    restore them and return to the address in the saved PC register.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define POP_REGISTERS          \ */
+/* OBSOLETE { asm ("subil $8,28(sp)");     \ */
+/* OBSOLETE   asm ("movem (sp),$ 0xffff"); \ */
+/* OBSOLETE   asm ("rte"); } */
diff --git a/gdb/config/gould/xm-pn.h b/gdb/config/gould/xm-pn.h
new file mode 100644
index 0000000..2540cfc
--- /dev/null
+++ b/gdb/config/gould/xm-pn.h
@@ -0,0 +1,87 @@
+/* OBSOLETE /* Parameters for execution on a Gould PN, for GDB, the GNU debugger. */
+/* OBSOLETE    Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define HOST_BYTE_ORDER BIG_ENDIAN */
+/* OBSOLETE  */
+/* OBSOLETE /* Address of U in kernel space *x/ */
+/* OBSOLETE #define	KERNEL_U_ADDR		0x3fc000 */
+/* OBSOLETE  */
+/* OBSOLETE /* This is a piece of magic that is given a register number REGNO */
+/* OBSOLETE    and as BLOCKEND the address in the system of the end of the user structure */
+/* OBSOLETE    and stores in ADDR the address in the kernel or core dump */
+/* OBSOLETE    of that register. *x/ */
+/* OBSOLETE #define REGISTER_U_ADDR(addr, blockend, regno) {			\ */
+/* OBSOLETE 	addr = blockend + regno * 4;					\ */
+/* OBSOLETE 	if (regno == PC_REGNUM) addr = blockend - 8 * 4;		\ */
+/* OBSOLETE 	if (regno == PS_REGNUM) addr = blockend - 7 * 4;		\ */
+/* OBSOLETE 	if (regno == SP_REGNUM) addr = blockend - 6 * 4;		\ */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* No KDB support, Yet! *x/ */
+/* OBSOLETE /* Interface definitions for kernel debugger KDB.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE /* Map machine fault codes into signal numbers. */
+/* OBSOLETE    First subtract 0, divide by 4, then index in a table. */
+/* OBSOLETE    Faults for which the entry in this table is 0 */
+/* OBSOLETE    are not handled by KDB; the program's own trap handler */
+/* OBSOLETE    gets to handle then.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define FAULT_CODE_ORIGIN 0 */
+/* OBSOLETE #define FAULT_CODE_UNITS 4 */
+/* OBSOLETE #define FAULT_TABLE    \ */
+/* OBSOLETE { 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \ */
+/* OBSOLETE   0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \ */
+/* OBSOLETE   0, 0, 0, 0, 0, 0, 0, 0, \ */
+/* OBSOLETE   SIGILL } */
+/* OBSOLETE  */
+/* OBSOLETE /* Start running with a stack stretching from BEG to END. */
+/* OBSOLETE    BEG and END should be symbols meaningful to the assembler. */
+/* OBSOLETE    This is used only for kdb.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define INIT_STACK(beg, end)  \ */
+/* OBSOLETE { asm (".globl end");         \ */
+/* OBSOLETE   asm ("movel $ end, sp");      \ */
+/* OBSOLETE   asm ("clrl fp"); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Push the frame pointer register on the stack.  *x/ */
+/* OBSOLETE #define PUSH_FRAME_PTR        \ */
+/* OBSOLETE   asm ("movel fp, -(sp)"); */
+/* OBSOLETE  */
+/* OBSOLETE /* Copy the top-of-stack to the frame pointer register.  *x/ */
+/* OBSOLETE #define POP_FRAME_PTR  \ */
+/* OBSOLETE   asm ("movl (sp), fp"); */
+/* OBSOLETE  */
+/* OBSOLETE /* After KDB is entered by a fault, push all registers */
+/* OBSOLETE    that GDB thinks about (all NUM_REGS of them), */
+/* OBSOLETE    so that they appear in order of ascending GDB register number. */
+/* OBSOLETE    The fault code will be on the stack beyond the last register.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define PUSH_REGISTERS        \ */
+/* OBSOLETE { asm ("clrw -(sp)");	      \ */
+/* OBSOLETE   asm ("pea 10(sp)");	      \ */
+/* OBSOLETE   asm ("movem $ 0xfffe,-(sp)"); } */
+/* OBSOLETE  */
+/* OBSOLETE /* Assuming the registers (including processor status) have been */
+/* OBSOLETE    pushed on the stack in order of ascending GDB register number, */
+/* OBSOLETE    restore them and return to the address in the saved PC register.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #define POP_REGISTERS          \ */
+/* OBSOLETE { asm ("subil $8,28(sp)");     \ */
+/* OBSOLETE   asm ("movem (sp),$ 0xffff"); \ */
+/* OBSOLETE   asm ("rte"); } */
diff --git a/gdb/config/h8300/h8300.mt b/gdb/config/h8300/h8300.mt
new file mode 100644
index 0000000..c6e25ab
--- /dev/null
+++ b/gdb/config/h8300/h8300.mt
@@ -0,0 +1,6 @@
+# Target: H8300 with HMS monitor, E7000 ICE and H8 simulator
+TDEPFILES= h8300-tdep.o remote-e7000.o ser-e7kpc.o monitor.o remote-hms.o dsrec.o
+TM_FILE= tm-h8300.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/h8300/libsim.a
diff --git a/gdb/config/h8300/tm-h8300.h b/gdb/config/h8300/tm-h8300.h
new file mode 100644
index 0000000..b398d2f
--- /dev/null
+++ b/gdb/config/h8300/tm-h8300.h
@@ -0,0 +1,303 @@
+/* Parameters for execution on a H8/300 series machine.
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct value;
+struct type;
+#endif
+
+/* 1 if debugging H8/300H application */
+extern int h8300hmode;
+extern int h8300smode;
+
+/* Number of bytes in a word */
+
+#define BINWORD (h8300hmode?4:2)
+
+#define EXTRA_FRAME_INFO 	\
+	struct frame_saved_regs *fsr;	\
+	CORE_ADDR from_pc; \
+	CORE_ADDR args_pointer;\
+        CORE_ADDR locals_pointer ;
+
+/* Zero the frame_saved_regs pointer when the frame is initialized,
+   so that FRAME_FIND_SAVED_REGS () will know to allocate and
+   initialize a frame_saved_regs struct the first time it is called.
+   Set the arg_pointer to -1, which is not valid; 0 and other values
+   indicate real, cached values.  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+	h8300_init_extra_frame_info (fromleaf, fi)
+
+extern void h8300_init_extra_frame_info ();
+
+#define IEEE_FLOAT
+/* Define the bit, byte, and word ordering of the machine.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+#undef TARGET_INT_BIT
+#define TARGET_INT_BIT  16
+#undef TARGET_LONG_BIT
+#define TARGET_LONG_BIT  32
+#undef TARGET_PTR_BIT
+#define TARGET_PTR_BIT  (h8300hmode ? 32:16)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)   {(ip) = h8300_skip_prologue(ip);}
+extern CORE_ADDR h8300_skip_prologue ();
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  read_memory_unsigned_integer (read_register (SP_REGNUM), BINWORD)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/*#define BREAKPOINT {0x7A, 0xFF}*/
+#define BREAKPOINT {0x01, 0x80}  /* Sleep */
+#define REMOTE_BREAKPOINT { 0x57, 0x30}  /* trapa #3 */
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.    */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are.  */
+
+#define REGISTER_SIZE 4
+
+#define NUM_REGS 13  
+
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the H8/300, all regs are 2 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) (h8300hmode ? 4 : 2)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (h8300hmode ? 4 : 2)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+(h8300hmode ? builtin_type_unsigned_long : builtin_type_unsigned_short)
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES \
+  {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp", "ccr","pc","cycles","tick","inst"}
+
+/* An array of names of registers. */
+
+extern char **h8300_register_names;
+#define REGISTER_NAME(i) h8300_register_names[i]
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define ARG0_REGNUM    0	/* first reg in which an arg may be passed */
+#define ARGLAST_REGNUM 2	/* last  reg in which an arg may be passed */
+#define FP_REGNUM      6	/* Contain saddress of executing stack frame */
+#define SP_REGNUM      7	/* Contains address of top of stack */
+#define CCR_REGNUM     8	/* Contains processor status */
+#define PC_REGNUM      9	/* Contains program counter */
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+/* FIXME: Won't work with both h8/300's.  */
+
+extern void h8300_extract_return_value PARAMS((struct type *, char *, char *));
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+    h8300_extract_return_value (TYPE, (char *)(REGBUF), (char *)(VALBUF))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  Assumes floats are passed
+   in d0/d1.  */
+/* FIXME: Won't work with both h8/300's.  */
+
+extern void h8300_store_return_value PARAMS((struct type *, char *));
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    h8300_store_return_value(TYPE, (char *) (VALBUF))
+
+/* struct passing and returning stuff */
+#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP)	\
+	write_register (0, STRUCT_ADDR)
+
+#define USE_STRUCT_CONVENTION(gcc_p, type)	(1)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+     extract_address (REGBUF + REGISTER_BYTE (0), \
+		      REGISTER_RAW_SIZE (0))
+     
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+#define FRAME_CHAIN(FRAME) h8300_frame_chain(FRAME)
+CORE_ADDR h8300_frame_chain PARAMS ((struct frame_info *));
+
+/* In the case of the H8/300, the frame's nominal address
+   is the address of a 2-byte word containing the calling frame's address.  */
+
+/* Use the alternate method of avoiding running up off the end of
+   the frame chain or following frames back into the startup code.
+   See the comments in objfile.h */
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+/* Any function with a frame looks like this
+   SECOND ARG
+   FIRST ARG
+   RET PC
+   SAVED R2
+   SAVED R3
+   SAVED FP   <-FP POINTS HERE
+   LOCALS0
+   LOCALS1    <-SP POINTS HERE
+   */
+
+#define FRAME_SAVED_PC(FRAME) h8300_frame_saved_pc(FRAME)
+
+#define FRAME_ARGS_ADDRESS(fi) frame_args_address(fi)
+
+#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address(fi);
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   h8300_frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+
+typedef unsigned short INSN_WORD;
+
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+
+#define GDB_TARGET_IS_H8300
+
+#define NUM_REALREGS 10
+#define NOP { 0x01, 0x80} /* A sleep insn */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/*
+ * CALL_DUMMY stuff:
+ */
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY			{0}
+#define CALL_DUMMY_LENGTH		(0)
+#define CALL_DUMMY_ADDRESS()		entry_point_address ()
+#define CALL_DUMMY_LOCATION		AT_ENTRY_POINT
+#define CALL_DUMMY_START_OFFSET		(0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET	(0)
+
+extern CORE_ADDR h8300_push_arguments PARAMS ((int nargs, 
+					       struct value **args, 
+					       CORE_ADDR sp,
+					       unsigned char struct_return,
+					       CORE_ADDR struct_addr));
+extern CORE_ADDR h8300_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP)	generic_pc_in_call_dummy (PC, SP)
+#define FIX_CALL_DUMMY(DUMMY, START_SP, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = h8300_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+/* Push an empty stack frame, to record the current PC, etc.  */
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+/* Discard from the stack the innermost frame, restoring all registers.  */
+#define POP_FRAME		h8300_pop_frame ()
+#define PUSH_RETURN_ADDRESS(PC, SP)	h8300_push_return_address (PC, SP)
+
+/* override the standard get_saved_register function with 
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+
diff --git a/gdb/config/h8500/h8500.mt b/gdb/config/h8500/h8500.mt
new file mode 100644
index 0000000..35f6b4d
--- /dev/null
+++ b/gdb/config/h8500/h8500.mt
@@ -0,0 +1,6 @@
+# Target: H8500 with HMS monitor and H8 simulator
+TDEPFILES= h8500-tdep.o monitor.o remote-hms.o dsrec.o
+TM_FILE= tm-h8500.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/h8500/libsim.a
diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h
new file mode 100644
index 0000000..8f7d966
--- /dev/null
+++ b/gdb/config/h8500/tm-h8500.h
@@ -0,0 +1,293 @@
+/* Parameters for execution on a H8/500 series machine.
+   Copyright (C) 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#define GDB_TARGET_IS_H8500
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Define the sizes of integers and pointers.  */
+
+#define TARGET_INT_BIT 16
+
+#define TARGET_LONG_BIT 32
+
+#define TARGET_PTR_BIT (minimum_mode ? 16 : 32)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)   { (ip) = h8500_skip_prologue(ip); }
+extern CORE_ADDR h8500_skip_prologue PARAMS ((CORE_ADDR));
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call()
+extern CORE_ADDR saved_pc_after_call PARAMS ((void));
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Illegal instruction - used by the simulator for breakpoint
+   detection */
+
+#define BREAKPOINT {0x0b}
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are.  */
+
+#define REGISTER_TYPE  unsigned long
+
+/* Say how much memory is needed to store a copy of the register set */
+
+#define REGISTER_BYTES    (NUM_REGS * 4) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) h8500_register_size(N)
+extern int h8500_register_size PARAMS ((int regno));
+
+#define REGISTER_SIZE 4
+
+#define REGISTER_VIRTUAL_SIZE(N) h8500_register_size(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) h8500_register_virtual_type(N)
+extern struct type *h8500_register_virtual_type PARAMS ((int regno));
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES \
+  { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+   "pr0","pr1","pr2","pr3","pr4","pr5","pr6","pr7", \
+    "cp", "dp", "ep", "tp", "sr", "pc"}
+
+/* Register numbers of various important registers.  Note that some of
+   these values are "real" register numbers, and correspond to the
+   general registers of the machine, and some are "phony" register
+   numbers which are too large to be actual register numbers as far as
+   the user is concerned but do serve to get the desired values when
+   passed to read_register.  */
+
+#define R0_REGNUM	0
+#define R1_REGNUM	1
+#define R2_REGNUM	2
+#define R3_REGNUM	3
+#define R4_REGNUM	4
+#define R5_REGNUM	5
+#define R6_REGNUM	6
+#define R7_REGNUM	7
+
+#define PR0_REGNUM	8
+#define PR1_REGNUM	9
+#define PR2_REGNUM	10
+#define PR3_REGNUM	11
+#define PR4_REGNUM	12
+#define PR5_REGNUM	13
+#define PR6_REGNUM	14
+#define PR7_REGNUM	15
+
+#define SEG_C_REGNUM	16	/* Segment registers */
+#define SEG_D_REGNUM	17
+#define SEG_E_REGNUM	18
+#define SEG_T_REGNUM	19
+
+#define CCR_REGNUM      20	/* Contains processor status */
+#define PC_REGNUM       21	/* Contains program counter */
+
+#define NUM_REGS 	22
+
+#define SP_REGNUM       PR7_REGNUM /* Contains address of top of stack */
+#define FP_REGNUM       PR6_REGNUM /* Contains address of executing stack frame */
+
+#define PTR_SIZE (minimum_mode ? 2 : 4)
+#define PTR_MASK (minimum_mode ? 0x0000ffff : 0x00ffffff)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+/*#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (0, (ADDR)); abort(); }*/
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+/* Any function with a frame looks like this
+   SECOND ARG
+   FIRST ARG
+   RET PC
+   SAVED R2
+   SAVED R3
+   SAVED FP   <-FP POINTS HERE
+   LOCALS0
+   LOCALS1    <-SP POINTS HERE
+   
+   */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  ;
+/*       (fci)->frame |= read_register(SEG_T_REGNUM) << 16;*/
+
+#define FRAME_CHAIN(FRAME) h8500_frame_chain(FRAME)
+struct frame_info;
+extern CORE_ADDR h8500_frame_chain PARAMS ((struct frame_info *));
+
+#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
+extern CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *frame));
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   frame_find_saved_regs(frame_info, &(frame_saved_regs))
+struct frame_saved_regs;
+extern void frame_find_saved_regs PARAMS ((struct frame_info *frame_info, struct frame_saved_regs *frame_saved_regs));
+
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME { h8500_pop_frame (); }
+extern void h8500_pop_frame PARAMS ((void));
+
+#define SHORT_INT_MAX 32767
+#define SHORT_INT_MIN -32768
+
+#define NAMES_HAVE_UNDERSCORE
+
+typedef unsigned short INSN_WORD;
+
+extern CORE_ADDR h8500_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) h8500_addr_bits_remove (addr)
+
+#define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+extern void print_register_hook PARAMS ((int));
+
+extern int minimum_mode;
+
+#define CALL_DUMMY_LENGTH 10
+
+/* Fake variables to make it easy to use 24 bit register pointers */
+
+#define IS_TRAPPED_INTERNALVAR h8500_is_trapped_internalvar
+extern int h8500_is_trapped_internalvar PARAMS ((char *name));
+
+#define VALUE_OF_TRAPPED_INTERNALVAR h8500_value_of_trapped_internalvar
+extern struct value * h8500_value_of_trapped_internalvar (/* struct internalvar *var */);
+
+#define SET_TRAPPED_INTERNALVAR h8500_set_trapped_internalvar
+extern void h8500_set_trapped_internalvar (/* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */);
+
+extern CORE_ADDR h8500_read_sp PARAMS ((void));
+extern void h8500_write_sp PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR h8500_read_fp PARAMS ((void));
+extern void h8500_write_fp PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR h8500_read_pc PARAMS ((int));
+extern void h8500_write_pc PARAMS ((CORE_ADDR, int));
+
+#define TARGET_READ_SP() h8500_read_sp()
+#define TARGET_WRITE_SP(x) h8500_write_sp(x)
+
+#define TARGET_READ_PC(pid) h8500_read_pc(pid)
+#define TARGET_WRITE_PC(x,pid) h8500_write_pc(x,pid)
+
+#define TARGET_READ_FP() h8500_read_fp()
+#define TARGET_WRITE_FP(x) h8500_write_fp(x)
diff --git a/gdb/config/i386/cygwin.mh b/gdb/config/i386/cygwin.mh
new file mode 100644
index 0000000..d93acb6
--- /dev/null
+++ b/gdb/config/i386/cygwin.mh
@@ -0,0 +1,6 @@
+MH_CFLAGS=
+XM_FILE=xm-cygwin.h
+XDEPFILES=ser-tcp.o
+NATDEPFILES= win32-nat.o
+NAT_FILE=../nm-empty.h
+XM_CLIBS=
diff --git a/gdb/config/i386/cygwin.mt b/gdb/config/i386/cygwin.mt
new file mode 100644
index 0000000..4dfc0c2
--- /dev/null
+++ b/gdb/config/i386/cygwin.mt
@@ -0,0 +1,6 @@
+# Target: Intel 386 run win32
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-cygwin.h
+
+
+
diff --git a/gdb/config/i386/fbsd.mh b/gdb/config/i386/fbsd.mh
new file mode 100644
index 0000000..499ed48
--- /dev/null
+++ b/gdb/config/i386/fbsd.mh
@@ -0,0 +1,5 @@
+# Host: Intel 386 running FreeBSD
+XDEPFILES= ser-tcp.o
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o core-aout.o i386b-nat.o
+XM_FILE= xm-i386bsd.h
+NAT_FILE= nm-fbsd.h
diff --git a/gdb/config/i386/fbsd.mt b/gdb/config/i386/fbsd.mt
new file mode 100644
index 0000000..e644f1c
--- /dev/null
+++ b/gdb/config/i386/fbsd.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running FreeBSD
+TDEPFILES= i386-tdep.o i387-tdep.o solib.o
+TM_FILE= tm-fbsd.h
diff --git a/gdb/config/i386/gdbserve.mt b/gdb/config/i386/gdbserve.mt
new file mode 100644
index 0000000..d8a7cba
--- /dev/null
+++ b/gdb/config/i386/gdbserve.mt
@@ -0,0 +1,3 @@
+# Target: GDBSERVE.NLM running on a i386
+TDEPFILES=	i386.o
+CPU_FILE=	i386
diff --git a/gdb/config/i386/go32.mh b/gdb/config/i386/go32.mh
new file mode 100644
index 0000000..311ee1c
--- /dev/null
+++ b/gdb/config/i386/go32.mh
@@ -0,0 +1,8 @@
+MH_CFLAGS=-D__GO32__ -D__MSDOS__
+XDEPFILES= go32-xdep.o
+XM_FILE= xm-go32.h
+HOST_IPC=-DDOS_IPC
+SER_HARDWIRE= ser-go32.o
+CC=i386-go32-gcc -O2 -fno-omit-frame-pointer
+
+
diff --git a/gdb/config/i386/i386aix.mh b/gdb/config/i386/i386aix.mh
new file mode 100644
index 0000000..cea05f0
--- /dev/null
+++ b/gdb/config/i386/i386aix.mh
@@ -0,0 +1,10 @@
+# Host: IBM PS/2 (i386) running AIX PS/2
+
+XM_FILE= xm-i386aix.h
+XDEPFILES= 
+
+NAT_FILE= nm-i386aix.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o i386aix-nat.o
+
+# Use gcc. Only coff output can be debugged
+CC=gcc
diff --git a/gdb/config/i386/i386aix.mt b/gdb/config/i386/i386aix.mt
new file mode 100644
index 0000000..12e0e1f
--- /dev/null
+++ b/gdb/config/i386/i386aix.mt
@@ -0,0 +1,7 @@
+# This port, for aix ps/2 (i386), will allow you to debug the coff
+# output generated gcc-2.3.3 + gas.  It will not understand IBM's
+# proprietary debug info.
+#
+# Target: IBM PS/2 (i386) running AIX PS/2
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386aix.h
diff --git a/gdb/config/i386/i386aout.mt b/gdb/config/i386/i386aout.mt
new file mode 100644
index 0000000..1c94ba5
--- /dev/null
+++ b/gdb/config/i386/i386aout.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 with a.out
+TDEPFILES= i386-tdep.o
+TM_FILE= tm-i386v.h
diff --git a/gdb/config/i386/i386bsd.mh b/gdb/config/i386/i386bsd.mh
new file mode 100644
index 0000000..f95c6ed
--- /dev/null
+++ b/gdb/config/i386/i386bsd.mh
@@ -0,0 +1,7 @@
+# Host: Intel 386 running 386BSD
+
+XM_FILE= xm-i386bsd.h
+XDEPFILES= 
+
+NAT_FILE= nm-i386bsd.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o core-aout.o i386b-nat.o
diff --git a/gdb/config/i386/i386bsd.mt b/gdb/config/i386/i386bsd.mt
new file mode 100644
index 0000000..ef61731
--- /dev/null
+++ b/gdb/config/i386/i386bsd.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running BSD
+TM_FILE= tm-i386bsd.h
+TDEPFILES= i386-tdep.o
diff --git a/gdb/config/i386/i386dgux.mh b/gdb/config/i386/i386dgux.mh
new file mode 100644
index 0000000..e05ebcd
--- /dev/null
+++ b/gdb/config/i386/i386dgux.mh
@@ -0,0 +1,9 @@
+# Host: Intel 386 running DGUX, cloned from SVR4
+
+XM_FILE= xm-i386v4.h
+XDEPFILES= ser-tcp.o
+# for network communication
+XM_CLIBS= -lsocket -lnsl
+
+NAT_FILE= nm-i386v4.h
+NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o
diff --git a/gdb/config/i386/i386gnu.mh b/gdb/config/i386/i386gnu.mh
new file mode 100644
index 0000000..4ceac7e
--- /dev/null
+++ b/gdb/config/i386/i386gnu.mh
@@ -0,0 +1,31 @@
+# Host: Intel 386 running the GNU Hurd
+XDEPFILES= i387-tdep.o
+NATDEPFILES= i386gnu-nat.o gnu-nat.o fork-child.o solib.o corelow.o notify_S.o process_reply_S.o msg_reply_S.o msg_U.o exc_request_U.o exc_request_S.o
+XM_FILE= xm-i386gnu.h
+NAT_FILE= nm-gnu.h
+MH_CFLAGS = -D_GNU_SOURCE
+
+XM_CLIBS = -lshouldbeinlibc
+
+# Use our own user stubs for the msg rpcs, so we can make them time out, in
+# case the program is fucked, or we guess the wrong signal thread.
+msg-MIGUFLAGS = -D'MSG_IMPORTS=waittime 1000;'
+
+# ick
+MIG = mig
+MIGCOM = $(MIG) -cc cat - /dev/null
+
+# Reply servers need special massaging of the code mig generates, to make
+# them work correctly for error returns in some cases.
+%_reply_S.h %_reply_S.c: %_reply.defs
+	$(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \
+	| $(MIGCOM) -sheader $*_reply_S.h -server $*_reply_S.raw -user /dev/null -header /dev/null \
+	&& $(AWK) -f $(srcdir)/reply_mig_hack.awk < $*_reply_S.raw > $*_reply_S.c
+# Normal servers
+%_S.h %_S.c: %.defs
+	$(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \
+	| $(MIGCOM) -sheader $*_S.h -server $*_S.c -user /dev/null -header /dev/null
+# User rpc stubs
+%_U.h %_U.c: %.defs
+	$(CPP) $(CPPFLAGS) $($*-MIGUFLAGS) -x c $< \
+	| $(MIGCOM) -sheader /dev/null -server /dev/null -user $*_U.c -header $*_U.h
diff --git a/gdb/config/i386/i386gnu.mt b/gdb/config/i386/i386gnu.mt
new file mode 100644
index 0000000..64fb018
--- /dev/null
+++ b/gdb/config/i386/i386gnu.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386/elf/GNU Hurd
+TDEPFILES= i386-tdep.o
+TM_FILE= tm-i386gnu.h
diff --git a/gdb/config/i386/i386lynx.mh b/gdb/config/i386/i386lynx.mh
new file mode 100644
index 0000000..9cb086f
--- /dev/null
+++ b/gdb/config/i386/i386lynx.mh
@@ -0,0 +1,11 @@
+# Host: Intel 386 running LynxOS
+
+XM_FILE= xm-i386lynx.h
+XM_CLIBS= -lbsd
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-i386lynx.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
+
+GDBSERVER_LIBS= -lbsd
+GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/i386/i386lynx.mt b/gdb/config/i386/i386lynx.mt
new file mode 100644
index 0000000..6704b43
--- /dev/null
+++ b/gdb/config/i386/i386lynx.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running LynxOS
+TDEPFILES= coff-solib.o i386-tdep.o i386ly-tdep.o
+TM_FILE= tm-i386lynx.h
diff --git a/gdb/config/i386/i386m3.mh b/gdb/config/i386/i386m3.mh
new file mode 100644
index 0000000..0a83ebf
--- /dev/null
+++ b/gdb/config/i386/i386m3.mh
@@ -0,0 +1,7 @@
+# Host: Intel 386 running Mach3
+
+XDEPFILES= i387-tdep.o core-aout.o
+NATDEPFILES= i386m3-nat.o m3-nat.o fork-child.o
+NAT_CLIBS= -lmachid -lnetname -lmach
+XM_FILE= xm-i386m3.h
+NAT_FILE= nm-m3.h
diff --git a/gdb/config/i386/i386m3.mt b/gdb/config/i386/i386m3.mt
new file mode 100644
index 0000000..e985ae3
--- /dev/null
+++ b/gdb/config/i386/i386m3.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 with a.out under Mach 3
+TDEPFILES= i386-tdep.o 
+TM_FILE= tm-i386m3.h
diff --git a/gdb/config/i386/i386mach.mh b/gdb/config/i386/i386mach.mh
new file mode 100644
index 0000000..44766c5
--- /dev/null
+++ b/gdb/config/i386/i386mach.mh
@@ -0,0 +1,10 @@
+# Host: Intel 386 running Mach
+
+# This is for mach2, maybe, or is obsolete (and seems to have only
+# host and native, not target).  Once we get the mach3 stuff working,
+# I think it can go away.
+
+XDEPFILES= 
+XM_FILE= xm-i386mach.h
+NAT_FILE= nm-i386mach.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o i386mach-nat.o
diff --git a/gdb/config/i386/i386mk.mh b/gdb/config/i386/i386mk.mh
new file mode 100644
index 0000000..849677c
--- /dev/null
+++ b/gdb/config/i386/i386mk.mh
@@ -0,0 +1,4 @@
+# Host: Intel 386 running Mach3 with OSF 1/MK
+
+XDEPFILES= os-mach3.o i386mach3-xdep.o i387-tdep.o
+XM_FILE= xm-i386osf1mk.h
diff --git a/gdb/config/i386/i386mk.mt b/gdb/config/i386/i386mk.mt
new file mode 100644
index 0000000..fc59442
--- /dev/null
+++ b/gdb/config/i386/i386mk.mt
@@ -0,0 +1,6 @@
+# Target: Intel 386 with a.out in osf 1/mk
+TDEPFILES= i386-tdep.o 
+TM_FILE= tm-i386osf1mk.h
+
+TM_CFLAGS= -I/usr/mach3/include
+TM_CLIBS= /usr/mach3/ccs/lib/libmachid.a /usr/mach3/ccs/lib/libnetname.a /usr/mach3/ccs/lib/libmach.a
diff --git a/gdb/config/i386/i386nw.mt b/gdb/config/i386/i386nw.mt
new file mode 100644
index 0000000..3109c42
--- /dev/null
+++ b/gdb/config/i386/i386nw.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running NetWare
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386nw.h
diff --git a/gdb/config/i386/i386os9k.mt b/gdb/config/i386/i386os9k.mt
new file mode 100644
index 0000000..5a8794d
--- /dev/null
+++ b/gdb/config/i386/i386os9k.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running OS9000
+TDEPFILES= i386-tdep.o remote-os9k.o
+TM_FILE= tm-i386os9k.h
diff --git a/gdb/config/i386/i386sco.mh b/gdb/config/i386/i386sco.mh
new file mode 100644
index 0000000..69076b5
--- /dev/null
+++ b/gdb/config/i386/i386sco.mh
@@ -0,0 +1,13 @@
+# Host: Intel 386 running SCO Unix (pre-SVR4)
+
+XM_FILE= xm-i386sco.h
+XDEPFILES= 
+XM_CLIBS= -lPW
+
+NAT_FILE= nm-i386sco.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o
+
+#msg The SCO C compiler cannot parse symtab.h when value.h has been included.
+#msg This is a bug in the compiler; the code is valid.
+#msg Therefore, you must use GCC to compile GDB on SCO machines.
+CC=gcc -D_POSIX_SOURCE=1
diff --git a/gdb/config/i386/i386sco4.mh b/gdb/config/i386/i386sco4.mh
new file mode 100644
index 0000000..a13f993
--- /dev/null
+++ b/gdb/config/i386/i386sco4.mh
@@ -0,0 +1,12 @@
+# Host: Intel 386 running SCO Unix 3.2v4
+
+XM_FILE= xm-i386sco.h
+XDEPFILES= 
+XM_CLIBS= -lPW
+
+NAT_FILE= nm-i386sco4.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o
+
+# The cc compiler mishandles const in cases like 
+# struct type ** const (c_builtin_types[]) = 
+MH_CFLAGS=-Dconst=
diff --git a/gdb/config/i386/i386sco5.mh b/gdb/config/i386/i386sco5.mh
new file mode 100644
index 0000000..3bea87a
--- /dev/null
+++ b/gdb/config/i386/i386sco5.mh
@@ -0,0 +1,17 @@
+# Host: Intel 386 running SCO OpenServer 5
+# Much like 3.2v4, except we don't have to avoid problems with const
+
+XM_FILE= xm-i386sco.h
+
+#
+# Not all configurations of SCO OpenServer 5 come with the TCP/IP 
+# runtime, but all come with the development system, so we always
+# have socket(), gethostbyname(), and friends.
+#
+XDEPFILES= ser-tcp.o
+XM_CLIBS= -lPW -lsocket
+
+NAT_FILE= nm-i386sco5.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corefile.o core-aout.o \
+	corelow.o i386v-nat.o solib.o
+
diff --git a/gdb/config/i386/i386sco5.mt b/gdb/config/i386/i386sco5.mt
new file mode 100644
index 0000000..54dc68d
--- /dev/null
+++ b/gdb/config/i386/i386sco5.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running SCO Open Server 5
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386sco5.h
diff --git a/gdb/config/i386/i386sol2.mh b/gdb/config/i386/i386sol2.mh
new file mode 100644
index 0000000..ff24294
--- /dev/null
+++ b/gdb/config/i386/i386sol2.mh
@@ -0,0 +1,7 @@
+# Host: Intel 386 running Solaris 2 (SVR4)
+
+XM_FILE= xm-i386v4.h
+XDEPFILES= 
+
+NAT_FILE= nm-i386sol2.h
+NATDEPFILES= core-regset.o procfs.o fork-child.o i386v4-nat.o corelow.o
diff --git a/gdb/config/i386/i386sol2.mt b/gdb/config/i386/i386sol2.mt
new file mode 100644
index 0000000..80b576f
--- /dev/null
+++ b/gdb/config/i386/i386sol2.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running SVR4
+TDEPFILES= i386-tdep.o i387-tdep.o solib.o
+TM_FILE= tm-i386sol2.h
diff --git a/gdb/config/i386/i386v.mh b/gdb/config/i386/i386v.mh
new file mode 100644
index 0000000..d67a30f
--- /dev/null
+++ b/gdb/config/i386/i386v.mh
@@ -0,0 +1,8 @@
+# Host: Intel 386 running System V
+
+XM_FILE= xm-i386v.h
+XDEPFILES= 
+XM_CLIBS= -lPW
+
+NAT_FILE= nm-i386v.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o
diff --git a/gdb/config/i386/i386v.mt b/gdb/config/i386/i386v.mt
new file mode 100644
index 0000000..7242d3e
--- /dev/null
+++ b/gdb/config/i386/i386v.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running System V
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386v.h
diff --git a/gdb/config/i386/i386v32.mh b/gdb/config/i386/i386v32.mh
new file mode 100644
index 0000000..5b4175f
--- /dev/null
+++ b/gdb/config/i386/i386v32.mh
@@ -0,0 +1,9 @@
+# Host: Intel 386 running System V release 3.2
+
+XM_FILE= xm-i386v32.h
+XDEPFILES= 
+XM_CLIBS= -lPW
+
+NAT_FILE= nm-i386v.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o i386v-nat.o
+
diff --git a/gdb/config/i386/i386v4.mh b/gdb/config/i386/i386v4.mh
new file mode 100644
index 0000000..4653887
--- /dev/null
+++ b/gdb/config/i386/i386v4.mh
@@ -0,0 +1,9 @@
+# Host: Intel 386 running SVR4
+
+XM_FILE= xm-i386v4.h
+XDEPFILES= 
+# for network communication
+XM_CLIBS= -lsocket -lnsl
+
+NAT_FILE= nm-i386v4.h
+NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o
diff --git a/gdb/config/i386/i386v4.mt b/gdb/config/i386/i386v4.mt
new file mode 100644
index 0000000..c22b675
--- /dev/null
+++ b/gdb/config/i386/i386v4.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running SVR4
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386v4.h
diff --git a/gdb/config/i386/i386v42mp.mh b/gdb/config/i386/i386v42mp.mh
new file mode 100644
index 0000000..94b6c06
--- /dev/null
+++ b/gdb/config/i386/i386v42mp.mh
@@ -0,0 +1,11 @@
+# Host: Intel 386 running SVR4
+
+XM_FILE= xm-i386v4.h
+XDEPFILES= 
+# for network communication
+XM_CLIBS= -lsocket -lnsl
+
+# we don't want nm-i386v4.h since that defines LOSING_POLL which isn't
+# appropriate for i386v42mp
+NAT_FILE= nm-i386v42mp.h
+NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o i386v4-nat.o
diff --git a/gdb/config/i386/i386v42mp.mt b/gdb/config/i386/i386v42mp.mt
new file mode 100644
index 0000000..0b2dea8
--- /dev/null
+++ b/gdb/config/i386/i386v42mp.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running SVR4.2MP
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-i386v42mp.h
diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh
new file mode 100644
index 0000000..30de91d
--- /dev/null
+++ b/gdb/config/i386/linux.mh
@@ -0,0 +1,7 @@
+# Host: Intel 386 running GNU/Linux
+
+XM_FILE= xm-linux.h
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-linux.h
+NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o core-aout.o core-regset.o i386v-nat.o i386v4-nat.o
diff --git a/gdb/config/i386/linux.mt b/gdb/config/i386/linux.mt
new file mode 100644
index 0000000..66cc97d
--- /dev/null
+++ b/gdb/config/i386/linux.mt
@@ -0,0 +1,5 @@
+# Target: Intel 386 running GNU/Linux
+TDEPFILES= i386-tdep.o i387-tdep.o
+TM_FILE= tm-linux.h
+
+GDBSERVER_DEPFILES= low-linux.o
diff --git a/gdb/config/i386/nbsd.mh b/gdb/config/i386/nbsd.mh
new file mode 100644
index 0000000..c76b897
--- /dev/null
+++ b/gdb/config/i386/nbsd.mh
@@ -0,0 +1,5 @@
+# Host: Intel 386 running NetBSD
+XDEPFILES= ser-tcp.o
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o i386b-nat.o
+XM_FILE= xm-nbsd.h
+NAT_FILE= nm-nbsd.h
diff --git a/gdb/config/i386/nbsd.mt b/gdb/config/i386/nbsd.mt
new file mode 100644
index 0000000..7570850
--- /dev/null
+++ b/gdb/config/i386/nbsd.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running NetBSD
+TDEPFILES= i386-tdep.o i387-tdep.o solib.o
+TM_FILE= tm-nbsd.h
diff --git a/gdb/config/i386/ncr3000.mh b/gdb/config/i386/ncr3000.mh
new file mode 100644
index 0000000..4f60756
--- /dev/null
+++ b/gdb/config/i386/ncr3000.mh
@@ -0,0 +1,16 @@
+# Host: NCR 3000 (Intel 386 running SVR4)
+
+# The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
+# This compiler not only emits obnoxious copyright messages every time
+# you run it, but it chokes and dies on a whole bunch of GNU source
+# files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
+# Unfortunately though, the AT&T compiler sometimes generates code that
+# the assembler barfs on if -g is used, so disable it by default as well.
+CC = /usr/ccs/ATT/cc
+CFLAGS =
+
+XM_FILE= xm-i386v4.h
+XDEPFILES= 
+
+NAT_FILE= nm-i386v4.h
+NATDEPFILES= corelow.o core-regset.o procfs.o fork-child.o i386v4-nat.o
diff --git a/gdb/config/i386/ncr3000.mt b/gdb/config/i386/ncr3000.mt
new file mode 100644
index 0000000..0bbf9b3
--- /dev/null
+++ b/gdb/config/i386/ncr3000.mt
@@ -0,0 +1,3 @@
+# Target: Intel 386 running SVR4
+TDEPFILES= i386-tdep.o i387-tdep.o solib.o
+TM_FILE= tm-i386v4.h
diff --git a/gdb/config/i386/nm-fbsd.h b/gdb/config/i386/nm-fbsd.h
new file mode 100644
index 0000000..727623c
--- /dev/null
+++ b/gdb/config/i386/nm-fbsd.h
@@ -0,0 +1,98 @@
+/* Native-dependent definitions for Intel 386 running BSD Unix, for GDB.
+   Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_FREEBSD_H
+#define NM_FREEBSD_H
+
+/* Be shared lib aware */
+#include "solib.h"
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#include <machine/vmparam.h>
+#define KERNEL_U_ADDR USRSTACK
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = i386_register_u_addr ((blockend),(regno));
+
+extern int
+i386_register_u_addr PARAMS ((int, int));
+
+#define PTRACE_ARG3_TYPE char*
+
+/* make structure definitions match up with those expected in solib.c */
+#define link_object	sod
+#define lo_name		sod_name
+#define lo_library	sod_library
+#define lo_unused	sod_reserved
+#define lo_major	sod_major
+#define lo_minor	sod_minor
+#define lo_next		sod_next
+
+#define link_map	so_map
+#define lm_addr		som_addr
+#define lm_name		som_path
+#define lm_next		som_next
+#define lm_lop		som_sod
+#define lm_lob		som_sodbase
+#define lm_rwt		som_write
+#define lm_ld		som_dynamic
+#define lm_lpd		som_spd
+
+#define link_dynamic_2	section_dispatch_table
+#define ld_loaded	sdt_loaded
+#define ld_need		sdt_sods
+#define ld_rules	sdt_filler1
+#define ld_got		sdt_got
+#define ld_plt		sdt_plt
+#define ld_rel		sdt_rel
+#define ld_hash		sdt_hash
+#define ld_stab		sdt_nzlist
+#define ld_stab_hash	sdt_filler2
+#define ld_buckets	sdt_buckets
+#define ld_symbols	sdt_strings
+#define ld_symb_size	sdt_str_sz
+#define ld_text		sdt_text_sz
+#define ld_plt_sz	sdt_plt_sz
+
+#define rtc_symb	rt_symbol
+#define rtc_sp		rt_sp
+#define rtc_next	rt_next
+
+#define ld_debug	so_debug
+#define ldd_version	dd_version
+#define ldd_in_debugger	dd_in_debugger
+#define ldd_sym_loaded	dd_sym_loaded
+#define ldd_bp_addr	dd_bpt_addr
+#define ldd_bp_inst	dd_bpt_shadow
+#define ldd_cp		dd_cc
+
+#define link_dynamic	_dynamic
+#define ld_version	d_version
+#define ldd		d_debug
+#define ld_un		d_un
+#define ld_2		d_sdt
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
+
+#endif /* NM_FREEBSD_H */
diff --git a/gdb/config/i386/nm-gnu.h b/gdb/config/i386/nm-gnu.h
new file mode 100644
index 0000000..95f25a5
--- /dev/null
+++ b/gdb/config/i386/nm-gnu.h
@@ -0,0 +1,22 @@
+/* Native-dependent definitions for Intel 386 running the GNU Hurd
+   Copyright 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include the generic hurd definitions.  */
+
+#include "nm-gnu.h"
diff --git a/gdb/config/i386/nm-i386aix.h b/gdb/config/i386/nm-i386aix.h
new file mode 100644
index 0000000..4240393
--- /dev/null
+++ b/gdb/config/i386/nm-i386aix.h
@@ -0,0 +1,42 @@
+/* Native support for i386 aix ps/2.
+   Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Changes for IBM AIX PS/2 by Minh Tran-Le (tranle@intellicorp.com)
+ * Revision:	 5-May-93 00:11:35
+ */
+
+#ifndef NM_I386AIX_H
+#define NM_I386AIX_H 1
+
+/* code to execute to print interesting information about the
+ * floating point processor (if any)
+ * No need to define if there is nothing to do.
+ */
+#define FLOAT_INFO { i386_float_info (); }
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+#undef  KERNEL_U_ADDR
+#define KERNEL_U_ADDR 0xf03fd000
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+#endif /* NM_I386AIX_H */
diff --git a/gdb/config/i386/nm-i386bsd.h b/gdb/config/i386/nm-i386bsd.h
new file mode 100644
index 0000000..7366f2d
--- /dev/null
+++ b/gdb/config/i386/nm-i386bsd.h
@@ -0,0 +1,39 @@
+/* Native-dependent definitions for Intel 386 running BSD Unix, for GDB.
+   Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_I386BSD_H
+#define NM_I386BSD_H
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#include <machine/vmparam.h>
+#define KERNEL_U_ADDR USRSTACK
+
+#undef FLOAT_INFO	/* No float info yet */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = i386_register_u_addr ((blockend),(regno));
+
+extern int
+i386_register_u_addr PARAMS ((int, int));
+
+#define PTRACE_ARG3_TYPE char*
+
+#endif /* NM_I386BSD_H */
diff --git a/gdb/config/i386/nm-i386lynx.h b/gdb/config/i386/nm-i386lynx.h
new file mode 100644
index 0000000..e29821f
--- /dev/null
+++ b/gdb/config/i386/nm-i386lynx.h
@@ -0,0 +1,25 @@
+/* Native-dependent definitions for Intel 386 running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_I386LYNX_H
+#define NM_I386LYNX_H
+
+#include "nm-lynx.h"
+
+#endif /* NM_I386LYNX_H */
diff --git a/gdb/config/i386/nm-i386mach.h b/gdb/config/i386/nm-i386mach.h
new file mode 100644
index 0000000..f01d2b1
--- /dev/null
+++ b/gdb/config/i386/nm-i386mach.h
@@ -0,0 +1,26 @@
+/* Native definitions for Mach on an Intel 386
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+/* #define ATTACH_DETACH	1 */
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
diff --git a/gdb/config/i386/nm-i386sco.h b/gdb/config/i386/nm-i386sco.h
new file mode 100644
index 0000000..33ab6de
--- /dev/null
+++ b/gdb/config/i386/nm-i386sco.h
@@ -0,0 +1,41 @@
+/* Native support for i386.
+   Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+   Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if 0
+/* code to execute to print interesting information about the
+   floating point processor (if any)
+   No need to define if there is nothing to do.
+   On the 386, unfortunately this code is host-dependent (and lives
+   in the i386-xdep.c file), so we can't
+   do this unless we *know* we aren't cross-debugging.  FIXME.
+ */
+#define FLOAT_INFO { i386_float_info (); }
+#endif /*0*/
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = i386_register_u_addr ((blockend),(regno));
+
+extern int
+i386_register_u_addr PARAMS ((int, int));
+
+/* When calling functions on SCO, sometimes we get an error writing some
+   of the segment registers.  This would appear to be a kernel
+   bug/non-feature.  */
+#define CANNOT_STORE_REGISTER(regno) ((regno) == 14 || (regno) == 15)
diff --git a/gdb/config/i386/nm-i386sco4.h b/gdb/config/i386/nm-i386sco4.h
new file mode 100644
index 0000000..41daef5
--- /dev/null
+++ b/gdb/config/i386/nm-i386sco4.h
@@ -0,0 +1,32 @@
+/* Native support for SCO 3.2v4.
+   Copyright 1993 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  By Ian Lance Taylor
+   <ian@cygnus.com> based on work by Martin Walker <maw@netcom.com>.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* SCO 3.2v4 is actually just like SCO 3.2v2, except that it
+   additionally supports attaching to a process.  */
+
+#include "i386/nm-i386sco.h"
+
+#define ATTACH_DETACH
+
+/* SCO, in its wisdom, does not provide <sys/ptrace.h>.  infptrace.c
+   does not have defaults for these values.  */
+#define PTRACE_ATTACH 10
+#define PTRACE_DETACH 11
diff --git a/gdb/config/i386/nm-i386sco5.h b/gdb/config/i386/nm-i386sco5.h
new file mode 100644
index 0000000..10e749b
--- /dev/null
+++ b/gdb/config/i386/nm-i386sco5.h
@@ -0,0 +1,39 @@
+/* Native support for SCO OpenServer 5
+   Copyright 1996, 1998 Free Software Foundation, Inc.
+   Re-written by J. Kean Johnston <jkj@sco.com>.
+   Originally written by Robert Lipe <robertl@dgii.com>, based on 
+   work by Ian Lance Taylor <ian@cygnus.com> and 
+   Martin Walker <maw@netcom.com>.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* Basically, its a lot like the older versions ... */
+#include "i386/nm-i386sco.h"
+
+/* ... but it can do a lot of SVR4 type stuff too. */
+#define SVR4_SHARED_LIBS
+#include "solib.h" /* Pick up shared library support */
+
+#define ATTACH_DETACH
+
+/* SCO does not provide <sys/ptrace.h>.  infptrace.c does not 
+   have defaults for these values.  */
+
+#define PTRACE_ATTACH 10
+#define PTRACE_DETACH 11
+
+
diff --git a/gdb/config/i386/nm-i386sol2.h b/gdb/config/i386/nm-i386sol2.h
new file mode 100644
index 0000000..2ae966c
--- /dev/null
+++ b/gdb/config/i386/nm-i386sol2.h
@@ -0,0 +1,35 @@
+/* Native support for i386 running Solaris 2.
+   Copyright 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-sysv4.h"
+
+#ifdef HAVE_THREAD_DB_LIB
+
+#ifdef __STDC__
+struct objfile;
+#endif
+
+#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE)
+
+void sol_thread_new_objfile PARAMS ((struct objfile *objfile));
+
+#define FIND_NEW_THREADS sol_find_new_threads
+void sol_find_new_threads PARAMS ((void));
+
+#endif
diff --git a/gdb/config/i386/nm-i386v.h b/gdb/config/i386/nm-i386v.h
new file mode 100644
index 0000000..8e6877e
--- /dev/null
+++ b/gdb/config/i386/nm-i386v.h
@@ -0,0 +1,36 @@
+/* Native support for i386.
+   Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+   Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if 0
+/* code to execute to print interesting information about the
+   floating point processor (if any)
+   No need to define if there is nothing to do.
+   On the 386, unfortunately this code is host-dependent (and lives
+   in the i386-xdep.c file), so we can't
+   do this unless we *know* we aren't cross-debugging.  FIXME.
+ */
+#define FLOAT_INFO { i386_float_info (); }
+#endif /*0*/
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = i386_register_u_addr ((blockend),(regno));
+
+extern int
+i386_register_u_addr PARAMS ((int, int));
diff --git a/gdb/config/i386/nm-i386v4.h b/gdb/config/i386/nm-i386v4.h
new file mode 100644
index 0000000..8722a40
--- /dev/null
+++ b/gdb/config/i386/nm-i386v4.h
@@ -0,0 +1,24 @@
+/* Native support for i386 running SVR4.
+   Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc.
+   Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-sysv4.h"
+
+/* Poll causes GDB to hang, at least under Unixware 1.1.2.  */
+#define LOSING_POLL
diff --git a/gdb/config/i386/nm-i386v42mp.h b/gdb/config/i386/nm-i386v42mp.h
new file mode 100644
index 0000000..6ffd128
--- /dev/null
+++ b/gdb/config/i386/nm-i386v42mp.h
@@ -0,0 +1,22 @@
+/* Native support for i386 running SVR4.
+   Copyright 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc.
+   Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-sysv4.h"
+
diff --git a/gdb/config/i386/nm-linux.h b/gdb/config/i386/nm-linux.h
new file mode 100644
index 0000000..ad0b8db
--- /dev/null
+++ b/gdb/config/i386/nm-linux.h
@@ -0,0 +1,73 @@
+/* Native support for GNU/Linux, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992, 1996, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_LINUX_H
+#define NM_LINUX_H
+
+#include "i386/nm-i386v.h"
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
+
+/* Tell gdb that we can attach and detach other processes */
+#define ATTACH_DETACH
+
+#define U_REGS_OFFSET 0
+
+/* GNU/Linux supports the 386 hardware debugging registers.  */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) 1
+
+/* After a watchpoint trap, the PC points to the instruction after
+   the one that caused the trap.  Therefore we don't need to step over it.
+   But we do need to reset the status register to avoid another trap.  */
+#define HAVE_CONTINUABLE_WATCHPOINT
+
+#define STOPPED_BY_WATCHPOINT(W)  \
+  i386_stopped_by_watchpoint (inferior_pid)
+
+/* Use these macros for watchpoint insertion/removal.  */
+
+#define target_insert_watchpoint(addr, len, type)  \
+  i386_insert_watchpoint (inferior_pid, addr, len, type)
+
+#define target_remove_watchpoint(addr, len, type)  \
+  i386_remove_watchpoint (inferior_pid, addr, len)
+
+/* We define this if link.h is available, because with ELF we use SVR4 style
+   shared libraries. */
+
+#ifdef HAVE_LINK_H
+#define SVR4_SHARED_LIBS
+#include "solib.h"		/* Support for shared libraries. */
+#endif
+
+extern CORE_ADDR
+i386_stopped_by_watchpoint PARAMS ((int));
+extern int
+i386_insert_watchpoint PARAMS ((int pid, CORE_ADDR addr, int len, int rw));
+extern int
+i386_remove_watchpoint PARAMS ((int pid, CORE_ADDR addr, int len));
+
+#endif /* #ifndef NM_LINUX_H */
diff --git a/gdb/config/i386/nm-m3.h b/gdb/config/i386/nm-m3.h
new file mode 100644
index 0000000..5127091
--- /dev/null
+++ b/gdb/config/i386/nm-m3.h
@@ -0,0 +1,22 @@
+/* Native-dependent definitions for Intel 386 running Mach 3.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include the generic Mach 3 definitions.  */
+
+#include "nm-m3.h"
diff --git a/gdb/config/i386/nm-nbsd.h b/gdb/config/i386/nm-nbsd.h
new file mode 100644
index 0000000..b59fec6
--- /dev/null
+++ b/gdb/config/i386/nm-nbsd.h
@@ -0,0 +1,34 @@
+/* Native-dependent definitions for Intel 386 running NetBSD, for GDB.
+   Copyright 1986, 1987, 1989, 1992, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_NBSD_H
+#define NM_NBSD_H
+
+/* Get generic NetBSD native definitions. */
+#include "nm-nbsd.h"
+
+/* #define FLOAT_INFO	{ i386_float_info(); } */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = i386_register_u_addr ((blockend),(regno));
+
+extern int
+i386_register_u_addr PARAMS ((int, int));
+
+#endif /* NM_NBSD_H */
diff --git a/gdb/config/i386/nm-ptx4.h b/gdb/config/i386/nm-ptx4.h
new file mode 100644
index 0000000..5e6cd56
--- /dev/null
+++ b/gdb/config/i386/nm-ptx4.h
@@ -0,0 +1,62 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-sysv4.h"
+
+#undef USE_PROC_FS
+
+#include "nm-symmetry.h"
+
+#define PTRACE_READ_REGS(pid,regaddr) mptrace (XPT_RREGS, (pid), (regaddr), 0)
+#define PTRACE_WRITE_REGS(pid,regaddr) \
+  mptrace (XPT_WREGS, (pid), (regaddr), 0)
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* We must fetch all the regs before storing, since we store all at once.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+#define CHILD_WAIT
+struct target_waitstatus;
+extern int child_wait PARAMS ((int, struct target_waitstatus *));
+
+/*
+ * ptx does attach as of ptx version 2.1.  Prior to that, the interface
+ * exists but does not work.
+ *
+ * FIXME: Using attach/detach requires using the ptx MPDEBUGGER
+ * interface.  There are still problems with that, so for now don't
+ * enable attach/detach.  If you turn it on anyway, it will mostly
+ * work, but has a number of bugs. -fubar, 2/94.
+ */
+/*#define ATTACH_DETACH 1*/
+#undef ATTACH_DETACH
+#define PTRACE_ATTACH XPT_DEBUG
+#define PTRACE_DETACH XPT_UNDEBUG
+/*
+ * The following drivel is needed because there are two ptrace-ish
+ * calls on ptx: ptrace() and mptrace(), each of which does about half
+ * of the ptrace functions.
+ */
+#define PTRACE_ATTACH_CALL(pid)  ptx_do_attach(pid)
+#define PTRACE_DETACH_CALL(pid, signo) ptx_do_detach(pid, signo)
diff --git a/gdb/config/i386/nm-sun386.h b/gdb/config/i386/nm-sun386.h
new file mode 100644
index 0000000..f7a904b
--- /dev/null
+++ b/gdb/config/i386/nm-sun386.h
@@ -0,0 +1,27 @@
+/* Native support for Sun 386i, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
diff --git a/gdb/config/i386/nm-symmetry.h b/gdb/config/i386/nm-symmetry.h
new file mode 100644
index 0000000..80cf097
--- /dev/null
+++ b/gdb/config/i386/nm-symmetry.h
@@ -0,0 +1,46 @@
+/* Definitions to make GDB run on a Sequent Symmetry under dynix 3.0,
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* We must fetch all the regs before storing, since we store all at once.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+#ifdef _SEQUENT_
+#define CHILD_WAIT
+extern int child_wait PARAMS ((int, struct target_waitstatus *));
+#endif
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#ifdef _SEQUENT_
+#include <sys/param.h>
+#include <sys/user.h>
+#include <sys/mc_vmparam.h>
+/* VA_UAREA is defined in <sys/mc_vmparam.h>, and is dependant upon 
+   sizeof(struct user) */
+#define KERNEL_U_ADDR (VA_UAREA) /* ptx */
+#else
+#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG))	/* dynix */
+#endif
diff --git a/gdb/config/i386/ptx.mh b/gdb/config/i386/ptx.mh
new file mode 100644
index 0000000..e623538
--- /dev/null
+++ b/gdb/config/i386/ptx.mh
@@ -0,0 +1,7 @@
+# Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387
+
+XM_FILE= xm-ptx.h
+XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o core-aout.o
+XM_CLIBS= -lPW -lseq
+
+NAT_FILE= nm-symmetry.h
diff --git a/gdb/config/i386/ptx.mt b/gdb/config/i386/ptx.mt
new file mode 100644
index 0000000..757df33
--- /dev/null
+++ b/gdb/config/i386/ptx.mt
@@ -0,0 +1,3 @@
+# Target: Sequent Symmetry running ptx 2.0, with Weitek 1167 or i387.
+TDEPFILES= symm-tdep.o i387-tdep.o i386-tdep.o
+TM_FILE= tm-ptx.h
diff --git a/gdb/config/i386/ptx4.mh b/gdb/config/i386/ptx4.mh
new file mode 100644
index 0000000..7b9d11b
--- /dev/null
+++ b/gdb/config/i386/ptx4.mh
@@ -0,0 +1,7 @@
+# Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387
+
+XM_FILE= xm-ptx4.h
+XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o core-aout.o solib.o core-regset.o
+XM_CLIBS= -lseq
+
+NAT_FILE= nm-ptx4.h
diff --git a/gdb/config/i386/ptx4.mt b/gdb/config/i386/ptx4.mt
new file mode 100644
index 0000000..f347809
--- /dev/null
+++ b/gdb/config/i386/ptx4.mt
@@ -0,0 +1,3 @@
+# Target: Sequent Symmetry running ptx 4.0, with Weitek 1167 or i387.
+TDEPFILES= symm-tdep.o i387-tdep.o i386-tdep.o
+TM_FILE= tm-ptx4.h
diff --git a/gdb/config/i386/sun386.mh b/gdb/config/i386/sun386.mh
new file mode 100644
index 0000000..d249661
--- /dev/null
+++ b/gdb/config/i386/sun386.mh
@@ -0,0 +1,5 @@
+# Host: Sun 386i
+XDEPFILES= 
+XM_FILE= xm-sun386.h
+NAT_FILE= nm-sun386.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o sun386-nat.o
diff --git a/gdb/config/i386/sun386.mt b/gdb/config/i386/sun386.mt
new file mode 100644
index 0000000..665ca64
--- /dev/null
+++ b/gdb/config/i386/sun386.mt
@@ -0,0 +1,3 @@
+# Target: Sun 386i target configuration file.
+TDEPFILES= i386-tdep.o solib.o
+TM_FILE= tm-sun386.h
diff --git a/gdb/config/i386/symmetry.mh b/gdb/config/i386/symmetry.mh
new file mode 100644
index 0000000..69c05bc
--- /dev/null
+++ b/gdb/config/i386/symmetry.mh
@@ -0,0 +1,5 @@
+# Host: Sequent Symmetry running Dynix 3.0, with Weitek 1167 or i387.
+XDEPFILES=
+XM_FILE= xm-symmetry.h
+NAT_FILE= nm-symmetry.h
+NATDEPFILES= inftarg.o fork-child.o corelow.o core-aout.o symm-nat.o
diff --git a/gdb/config/i386/symmetry.mt b/gdb/config/i386/symmetry.mt
new file mode 100644
index 0000000..a3dba70
--- /dev/null
+++ b/gdb/config/i386/symmetry.mt
@@ -0,0 +1,3 @@
+# Target: Sequent Symmetry running Dynix 3.0, with Weitek 1167 or i387.
+TDEPFILES= i386-tdep.o symm-tdep.o i387-tdep.o
+TM_FILE= tm-symmetry.h
diff --git a/gdb/config/i386/tm-cygwin.h b/gdb/config/i386/tm-cygwin.h
new file mode 100644
index 0000000..b1ad894
--- /dev/null
+++ b/gdb/config/i386/tm-cygwin.h
@@ -0,0 +1,127 @@
+/* Macro definitions for i386 running under the win32 API Unix.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "i386/tm-i386v.h"
+
+#undef MAX_REGISTER_RAW_SIZE
+#undef MAX_REGISTER_VIRTUAL_SIZE
+#undef NUM_REGS
+#undef REGISTER_BYTE
+#undef REGISTER_BYTES
+#undef REGISTER_CONVERTIBLE
+#undef REGISTER_CONVERT_TO_RAW
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#undef REGISTER_NAMES
+#undef REGISTER_RAW_SIZE
+#undef REGISTER_VIRTUAL_SIZE
+#undef REGISTER_VIRTUAL_TYPE
+
+/* Number of machine registers */
+
+#define NUM_REGS 24
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+/* the order of the first 8 registers must match the compiler's 
+ * numbering scheme (which is the same as the 386 scheme)
+ * also, this table must match regmap in i386-pinsn.c.
+ */
+
+#define REGISTER_NAMES { "eax",  "ecx",  "edx",  "ebx",  \
+			 "esp",  "ebp",  "esi",  "edi",  \
+			 "eip",  "ps",   "cs",   "ss",   \
+			 "ds",   "es",   "fs",   "gs",   \
+			 "st",   "st(1)","st(2)","st(3)",\
+                         "st(4)","st(5)","st(6)","st(7)",}
+
+#define FP0_REGNUM 16
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+
+#define REGISTER_BYTES (16 * 4 + 8 * 10)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) (((N) < 16) ? (N) * 4 : (((N) - 16) * 10) + (16 * 4))
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) (((N) < 16) ? 4 : 10)
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((N) < 16) ? 4 : 10)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 10
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#define REGISTER_CONVERTIBLE(N) \
+  ((N < FP0_REGNUM) ? 0 : 1)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+extern void
+i387_to_double PARAMS ((char *, char *));
+
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  i387_to_double ((FROM), (char *)&val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+extern void
+double_to_i387 PARAMS ((char *, char *));
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  double_to_i387((char *)&val, (TO)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N < FP0_REGNUM) ? builtin_type_int : \
+   builtin_type_double)
+
+#define NAMES_HAVE_UNDERSCORE
+
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) skip_trampoline_code (pc, name)
+#define SKIP_TRAMPOLINE_CODE(pc)           skip_trampoline_code (pc, 0)
+extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR pc, char *name));
+
+extern char *cygwin_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) cygwin_pid_to_str (PID)
diff --git a/gdb/config/i386/tm-fbsd.h b/gdb/config/i386/tm-fbsd.h
new file mode 100644
index 0000000..9933e10
--- /dev/null
+++ b/gdb/config/i386/tm-fbsd.h
@@ -0,0 +1,32 @@
+/* Target macro definitions for i386 running FreeBSD
+   Copyright (C) 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "i386/tm-i386bsd.h"
+
+
+#undef NUM_REGS
+#define NUM_REGS 14
+
+
+#undef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) STREQ (name, "_DYNAMIC")
+
+
+extern i386_float_info ();
+#define FLOAT_INFO  i386_float_info ()
diff --git a/gdb/config/i386/tm-i386.h b/gdb/config/i386/tm-i386.h
new file mode 100644
index 0000000..e2039e5
--- /dev/null
+++ b/gdb/config/i386/tm-i386.h
@@ -0,0 +1,307 @@
+/* Macro definitions for GDB on an Intel i[345]86.
+   Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#ifndef TM_I386_H
+#define TM_I386_H 1
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct frame_info;
+struct frame_saved_regs;
+struct type;
+#endif
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* Used for example in valprint.c:print_floating() to enable checking
+   for NaN's */
+
+#define IEEE_FLOAT
+
+/* Number of traps that happen between exec'ing the shell to run an
+   inferior, and when we finally get to the inferior code.  This is 2
+   on most implementations. */
+
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions to reach some
+   "real" code.  */
+
+#define SKIP_PROLOGUE(frompc)   {(frompc) = i386_skip_prologue((frompc));}
+
+extern int i386_skip_prologue PARAMS ((int));
+
+/* Immediately after a function call, return the saved pc.  Can't always go
+   through the frames for this because on some machines the new frame is not
+   set up until the new function executes some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) (read_memory_integer (read_register (SP_REGNUM), 4))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xcc}
+
+/* Amount PC must be decremented by after a breakpoint.  This is often the
+   number of bytes in BREAKPOINT but not always. */
+
+#define DECR_PC_AFTER_BREAK 1
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_FREGS 0 /*8*/		/* Number of FP regs */
+#define NUM_REGS (16 + NUM_FREGS)	/* Basic i*86 regs + FP regs */
+
+/* Initializer for an array of names of registers.  There should be at least
+   NUM_REGS strings in this initializer.  Any excess ones are simply ignored.
+   The order of the first 8 registers must match the compiler's numbering
+   scheme (which is the same as the 386 scheme) and also regmap in the various
+   *-nat.c files. */
+
+#define REGISTER_NAMES { "eax",   "ecx",    "edx",   "ebx", \
+			 "esp",   "ebp",    "esi",   "edi", \
+			 "eip",   "eflags", "cs",    "ss", \
+			 "ds",    "es",     "fs",    "gs", \
+			 "st0",   "st1",    "st2",   "st3", \
+			 "st4",   "st5",    "st6",   "st7", \
+			 }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define FP_REGNUM 5	/* (ebp) Contains address of executing stack frame */
+#define SP_REGNUM 4	/* (usp) Contains address of top of stack */
+#define PC_REGNUM 8	/* (eip) Contains program counter */
+#define PS_REGNUM 9	/* (ps)  Contains processor status */
+
+#define FP0_REGNUM 16   /* (st0) 387 register */
+#define FPC_REGNUM 25	/* 80387 control register */
+
+/* Total amount of space needed to store our copies of the machine's register
+   state, the array `registers'. */
+
+#define REGISTER_BYTES ((NUM_REGS - NUM_FREGS)*4 + NUM_FREGS*10)
+
+/* Index within `registers' of the first byte of the space for register N. */
+
+#define REGISTER_BYTE(N) \
+  (((N) < FP0_REGNUM) ? ((N) * 4) : ((((N) - FP0_REGNUM) * 10) + 64))
+ 
+/* Number of bytes of storage in the actual machine representation for
+   register N.  All registers are 4 bytes, except 387 st(0) - st(7),
+   which are 80 bits each. */
+
+#define REGISTER_RAW_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 10)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((N) < FP0_REGNUM) ? 4 : 8)
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type of data in 
+   register N.  Perhaps si and di should go here, but potentially they
+   could be used for things other than address.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  (((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM) \
+   ? lookup_pointer_type (builtin_type_void) \
+   : (((N) < FP0_REGNUM) \
+      ? builtin_type_int \
+      : builtin_type_double))
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { char buf[REGISTER_SIZE];	\
+    (SP) -= sizeof (ADDR);	\
+    store_address (buf, sizeof (ADDR), ADDR);	\
+    write_memory ((SP), buf, sizeof (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+   i386_extract_return_value ((TYPE),(REGBUF),(VALBUF))
+
+extern void i386_extract_return_value PARAMS ((struct type *, char [], char *));
+
+/* Write into appropriate registers a function return value of type TYPE, given
+   in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  {    	       	       	       	       	       	       	       	       	     \
+    if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				     \
+      write_register_bytes (REGISTER_BYTE (FP0_REGNUM), (VALBUF),	     \
+			    TYPE_LENGTH (TYPE));			     \
+    else								     \
+      write_register_bytes (0, (VALBUF), TYPE_LENGTH (TYPE));  		     \
+  }
+
+/* Extract from an array REGBUF containing the (raw) register state the address
+   in which a function should return its structure value, as a CORE_ADDR (or an
+   expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* The following redefines make backtracing through sigtramp work.
+   They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp
+   from the sigcontext structure which is pushed by the kernel on the
+   user stack, along with a pointer to it.  */
+
+/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
+   chain-pointer.
+   In the case of the i386, the frame's nominal address
+   is the address of a 4-byte word containing the calling frame's address.  */
+
+#define FRAME_CHAIN(thisframe)  \
+  ((thisframe)->signal_handler_caller \
+   ? (thisframe)->frame \
+   : (!inside_entry_file ((thisframe)->pc) \
+      ? read_memory_integer ((thisframe)->frame, 4) \
+      : 0))
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  do { \
+    if ((FI)->signal_handler_caller) \
+      (FRAMELESS) = 0; \
+    else \
+      (FRAMELESS) = frameless_look_for_prologue(FI); \
+  } while (0)
+
+/* Saved Pc.  Get it from sigcontext if within sigtramp.  */
+
+#define FRAME_SAVED_PC(FRAME) \
+  (((FRAME)->signal_handler_caller \
+    ? sigtramp_saved_pc (FRAME) \
+    : read_memory_integer ((FRAME)->frame + 4, 4)) \
+   )
+
+extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *));
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.  Can return -1, meaning no way
+   to tell, which is typical now that the C compiler delays popping them.  */
+
+#define FRAME_NUM_ARGS(numargs, fi) (numargs) = i386_frame_num_args(fi)
+
+extern int i386_frame_num_args PARAMS ((struct frame_info *));
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); }
+
+extern void i386_frame_find_saved_regs PARAMS ((struct frame_info *,
+						struct frame_saved_regs *));
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); }
+
+extern void i386_push_dummy_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  { i386_pop_frame (); }
+
+extern void i386_pop_frame PARAMS ((void));
+
+
+/* this is 
+ *   call 11223344 (32 bit relative)
+ *   int3
+ */
+
+#define CALL_DUMMY { 0x223344e8, 0xcc11 }
+
+#define CALL_DUMMY_LENGTH 8
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET 5
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ \
+	int from, to, delta, loc; \
+	loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH); \
+	from = loc + 5; \
+	to = (int)(fun); \
+	delta = to - from; \
+	*((char *)(dummyname) + 1) = (delta & 0xff); \
+	*((char *)(dummyname) + 2) = ((delta >> 8) & 0xff); \
+	*((char *)(dummyname) + 3) = ((delta >> 16) & 0xff); \
+	*((char *)(dummyname) + 4) = ((delta >> 24) & 0xff); \
+}
+
+extern void print_387_control_word PARAMS ((unsigned int));
+extern void print_387_status_word PARAMS ((unsigned int));
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+#endif /* ifndef TM_I386_H */
diff --git a/gdb/config/i386/tm-i386aix.h b/gdb/config/i386/tm-i386aix.h
new file mode 100644
index 0000000..b0121fa
--- /dev/null
+++ b/gdb/config/i386/tm-i386aix.h
@@ -0,0 +1,67 @@
+/* Macro defintions for IBM AIX PS/2 (i386).
+   Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Changes for IBM AIX PS/2 by Minh Tran-Le (tranle@intellicorp.com).  */
+
+#ifndef TM_I386AIX_H
+#define TM_I386AIX_H 1
+
+#include "i386/tm-i386.h"
+#include <sys/reg.h>
+
+#ifndef I386
+# define I386 1
+#endif
+#ifndef I386_AIX_TARGET
+# define I386_AIX_TARGET 1
+#endif
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#undef  REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(N) \
+  ((N < FP0_REGNUM) ? 0 : 1)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  i387_to_double ((FROM), (char *)&val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+extern void
+i387_to_double PARAMS ((char *, char *));
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#undef REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  double_to_i387((char *)&val, (TO)); \
+}
+extern void
+double_to_i387 PARAMS ((char *, char *));
+
+#endif /* TM_I386AIX_H */
diff --git a/gdb/config/i386/tm-i386bsd.h b/gdb/config/i386/tm-i386bsd.h
new file mode 100644
index 0000000..8b8c3a9
--- /dev/null
+++ b/gdb/config/i386/tm-i386bsd.h
@@ -0,0 +1,43 @@
+/* Macro definitions for i386 running under BSD Unix.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386BSD_H
+#define TM_I386BSD_H 1
+
+#include "i386/tm-i386.h"
+
+/* 386BSD cannot handle the segment registers. */
+/* BSDI can't handle them either.  */
+
+#undef NUM_REGS
+#define NUM_REGS 10
+
+/* On 386 bsd, sigtramp is above the user stack and immediately below
+   the user area. Using constants here allows for cross debugging.
+   These are tested for BSDI but should work on 386BSD.  */
+
+#define SIGTRAMP_START(pc)	0xfdbfdfc0
+#define SIGTRAMP_END(pc)	0xfdbfe000
+
+/* Saved Pc.  Get it from sigcontext if within sigtramp.  */
+
+/* Offset to saved PC in sigcontext, from <sys/signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 20
+
+#endif  /* ifndef TM_I386BSD_H */
diff --git a/gdb/config/i386/tm-i386gnu.h b/gdb/config/i386/tm-i386gnu.h
new file mode 100644
index 0000000..a6e3c08
--- /dev/null
+++ b/gdb/config/i386/tm-i386gnu.h
@@ -0,0 +1,48 @@
+/* Macro definitions for i386, GNU Hurd
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include common definitions for gnu systems */
+#include "nm-gnu.h"
+
+/* Thread flavors used in re-setting the T bit.
+ * @@ this is also bad for cross debugging.
+ */
+#define THREAD_STATE_FLAVOR		i386_THREAD_STATE
+#define THREAD_STATE_SIZE		i386_THREAD_STATE_COUNT
+#define THREAD_STATE_SET_TRACED(state) \
+  	((struct i386_thread_state *)state)->efl |= 0x100
+#define THREAD_STATE_CLEAR_TRACED(state) \
+  	((((struct i386_thread_state *)state)->efl &= ~0x100), 1)
+
+/* we can do it */
+#define ATTACH_DETACH 1
+
+/* Sigh. There should be a file for i386 but no sysv stuff in it */
+#include "i386/tm-i386v.h"
+
+/* I want to test this float info code. See comment in tm-i386v.h */
+#undef FLOAT_INFO
+#define FLOAT_INFO { i386_mach3_float_info (); }
+
+/* Address of end of stack space.
+ * for MACH, see <machine/vmparam.h>
+ * @@@ I don't know what is in the 5 ints...
+ */
+#undef  STACK_END_ADDR
+#define STACK_END_ADDR (0xc0000000-sizeof(int [5]))
diff --git a/gdb/config/i386/tm-i386lynx.h b/gdb/config/i386/tm-i386lynx.h
new file mode 100644
index 0000000..9e732b3
--- /dev/null
+++ b/gdb/config/i386/tm-i386lynx.h
@@ -0,0 +1,33 @@
+/* Macro definitions for Intel 386 running under LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386LYNX_H
+#define TM_I386LYNX_H
+
+#include "tm-lynx.h"
+
+/* Most definitions from sysv could be used. */
+#include "i386/tm-i386.h"
+
+#undef SAVED_PC_AFTER_CALL
+
+#define SAVED_PC_AFTER_CALL i386lynx_saved_pc_after_call
+CORE_ADDR i386lynx_saved_pc_after_call ();
+
+#endif /* TM_I386LYNX_H */
diff --git a/gdb/config/i386/tm-i386m3.h b/gdb/config/i386/tm-i386m3.h
new file mode 100644
index 0000000..2f97505
--- /dev/null
+++ b/gdb/config/i386/tm-i386m3.h
@@ -0,0 +1,60 @@
+/* Macro definitions for i386, Mach 3.0
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include common definitions for Mach3 systems */
+#include "nm-m3.h"
+
+/* Define offsets to access CPROC stack when it does not have
+ * a kernel thread.
+ */
+#define MACHINE_CPROC_SP_OFFSET 20
+#define MACHINE_CPROC_PC_OFFSET 16
+#define MACHINE_CPROC_FP_OFFSET 12
+
+/* Thread flavors used in re-setting the T bit.
+ * @@ this is also bad for cross debugging.
+ */
+#define TRACE_FLAVOR		i386_THREAD_STATE
+#define TRACE_FLAVOR_SIZE	i386_THREAD_STATE_COUNT
+#define TRACE_SET(x,state) \
+  	((struct i386_thread_state *)state)->efl |= 0x100
+#define TRACE_CLEAR(x,state) \
+  	((((struct i386_thread_state *)state)->efl &= ~0x100), 1)
+
+/* we can do it */
+#define ATTACH_DETACH 1
+
+/* Define this if the C compiler puts an underscore at the front
+   of external names before giving them to the linker.  */
+
+#define NAMES_HAVE_UNDERSCORE
+
+/* Sigh. There should be a file for i386 but no sysv stuff in it */
+#include "i386/tm-i386.h"
+
+/* I want to test this float info code. See comment in tm-i386v.h */
+#undef FLOAT_INFO
+#define FLOAT_INFO { i386_mach3_float_info (); }
+
+/* Address of end of stack space.
+ * for MACH, see <machine/vmparam.h>
+ * @@@ I don't know what is in the 5 ints...
+ */
+#undef  STACK_END_ADDR
+#define STACK_END_ADDR (0xc0000000-sizeof(int [5]))
diff --git a/gdb/config/i386/tm-i386mk.h b/gdb/config/i386/tm-i386mk.h
new file mode 100644
index 0000000..3625efb
--- /dev/null
+++ b/gdb/config/i386/tm-i386mk.h
@@ -0,0 +1,25 @@
+/* Macro definitions for i386, Mach 3.0, OSF 1/MK
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Until OSF switches to a newer Mach kernel that has
+ * a different get_emul_vector() interface.
+ */
+#define MK67 1
+
+#include "i386/tm-i386m3.h"
diff --git a/gdb/config/i386/tm-i386nw.h b/gdb/config/i386/tm-i386nw.h
new file mode 100644
index 0000000..e5cdade
--- /dev/null
+++ b/gdb/config/i386/tm-i386nw.h
@@ -0,0 +1,49 @@
+/* Macro definitions for i386 running NetWare.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386NW_H
+#define TM_I386NW_H 1
+
+#include "i386/tm-i386.h"
+
+/* Stop backtracing when we wander into main.  */
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+
+/* Offsets (in target ints) into jmp_buf.  Not defined in any system header
+   file, so we have to step through setjmp/longjmp with a debugger and figure
+   them out.  */
+
+#define JB_ELEMENT_SIZE 4	/* jmp_buf[] is array of ints */
+
+#define JB_PC	6		/* Setjmp()'s return PC saved here */
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+#endif  /* ifndef TM_I386NW_H */
+
diff --git a/gdb/config/i386/tm-i386os9k.h b/gdb/config/i386/tm-i386os9k.h
new file mode 100644
index 0000000..2b48641
--- /dev/null
+++ b/gdb/config/i386/tm-i386os9k.h
@@ -0,0 +1,63 @@
+/* Macro definitions for i386 running under BSD Unix.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386OS9K_H
+#define TM_I386OS9K_H 1
+
+#include "i386/tm-i386.h"
+
+/* Number of machine registers */
+
+#undef  NUM_REGS
+#define NUM_REGS (16)	/* Basic i*86 regs */
+
+/* Initializer for an array of names of registers.  There should be at least
+   NUM_REGS strings in this initializer.  Any excess ones are simply ignored.
+   The order of the first 8 registers must match the compiler's numbering
+   scheme (which is the same as the 386 scheme) and also regmap in the various
+   *-nat.c files. */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \
+                         "esp", "ebp", "esi", "edi", \
+                         "eip", "eflags", "cs", "ss", \
+                         "ds", "es", "fs", "gs", \
+                         }
+
+#define DATABASE_REG 	3		/* ebx */
+
+/* Amount PC must be decremented by after a breakpoint.  This is often the
+   number of bytes in BREAKPOINT but not always (such as now). */
+
+#undef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 0
+
+/* On 386 bsd, sigtramp is above the user stack and immediately below
+   the user area. Using constants here allows for cross debugging.
+   These are tested for BSDI but should work on 386BSD.  */
+#define SIGTRAMP_START(pc)	0xfdbfdfc0
+#define SIGTRAMP_END(pc)	0xfdbfe000
+
+/* Saved Pc.  Get it from sigcontext if within sigtramp.  */
+
+/* Offset to saved PC in sigcontext, from <sys/signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 20
+
+#define BELIEVE_PCC_PROMOTION 1
+
+#endif	/* #ifndef TM_I386OS9K_H */
diff --git a/gdb/config/i386/tm-i386sco5.h b/gdb/config/i386/tm-i386sco5.h
new file mode 100644
index 0000000..ffac5b3
--- /dev/null
+++ b/gdb/config/i386/tm-i386sco5.h
@@ -0,0 +1,62 @@
+/* Macro definitions for GDB on an Intel i386 running SCO Open Server 5.
+   Copyright (C) 1998 Free Software Foundation, Inc.
+   Written by J. Kean Johnston (jkj@sco.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386SCO5_H
+#define TM_I386SCO5_H 1
+
+/* Pick up most of what we need from the generic i386 target include file. */
+
+#include "i386/tm-i386.h"
+
+/* Pick up more stuff from the generic SYSV and SVR4 host include files. */
+#include "i386/tm-i386v.h"
+#include "tm-sysv4.h"
+
+#define KERNEL_U_SIZE kernel_u_size()
+
+/*
+ * SCO is unlike other SVR3 targets in that it has SVR4 style shared
+ * libs, with a slight twist. We expect 3 traps (2 for the exec and
+ * one for the dynamic loader).  After the third trap we insert the
+ * SOLIB breakpoints, then wait for the 4th trap.
+ */
+#undef START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 3
+
+/* We can also do hardware watchpoints */
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) 1
+
+/* After a watchpoint trap, the PC points to the instruction which
+   caused the trap.  But we can continue over it without disabling the
+   trap. */
+#define HAVE_CONTINUABLE_WATCHPOINT
+#define HAVE_STEPPABLE_WATCHPOINT
+
+#define STOPPED_BY_WATCHPOINT(W)  \
+  i386_stopped_by_watchpoint (inferior_pid)
+
+#define target_insert_watchpoint(addr, len, type)  \
+  i386_insert_watchpoint (inferior_pid, addr, len, type)
+
+#define target_remove_watchpoint(addr, len, type)  \
+  i386_remove_watchpoint (inferior_pid, addr, len)
+
+#endif  /* ifndef TM_I386SCO5_H */
diff --git a/gdb/config/i386/tm-i386sol2.h b/gdb/config/i386/tm-i386sol2.h
new file mode 100644
index 0000000..dbd6317
--- /dev/null
+++ b/gdb/config/i386/tm-i386sol2.h
@@ -0,0 +1,64 @@
+/* Macro definitions for GDB on an Intel i386 running Solaris 2.
+   Copyright (C) 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386SOL2_H
+#define TM_I386SOL2_H 1
+
+#include "i386/tm-i386v4.h"
+ 
+/* Signal handler frames under Solaris 2 are recognized by a return address
+   of 0xFFFFFFFF, the third parameter on the signal handler stack is
+   a pointer to an ucontext.  */
+#undef sigtramp_saved_pc
+#undef I386V4_SIGTRAMP_SAVED_PC
+#define SIGCONTEXT_PC_OFFSET (36 + 14 * 4)
+#undef IN_SIGTRAMP
+#define IN_SIGTRAMP(pc, name) (pc == 0xFFFFFFFF)
+
+/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols,
+   and for SunPRO 3.0, N_FUN symbols too.  */
+#define SOFUN_ADDRESS_MAYBE_MISSING
+
+extern char *sunpro_static_transform_name PARAMS ((char *));
+#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x)
+#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '.')
+
+#define FAULTED_USE_SIGINFO
+
+/* Macros to extract process id and thread id from a composite pid/tid */
+#define PIDGET(pid) ((pid) & 0xffff)
+#define TIDGET(pid) (((pid) >> 16) & 0xffff)
+
+/* Macro to extract carry from given regset.  */
+#define PS_FLAG_CARRY 0x1	/* Carry bit in PS */
+#define PROCFS_GET_CARRY(regset) ((regset)[EFL] & PS_FLAG_CARRY)
+
+#ifdef HAVE_THREAD_DB_LIB
+
+extern char *solaris_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) solaris_pid_to_str (PID)
+
+#else
+
+extern char *procfs_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) procfs_pid_to_str (PID)
+
+#endif
+
+#endif  /* ifndef TM_I386SOL2_H */
diff --git a/gdb/config/i386/tm-i386v.h b/gdb/config/i386/tm-i386v.h
new file mode 100644
index 0000000..bb31cb0
--- /dev/null
+++ b/gdb/config/i386/tm-i386v.h
@@ -0,0 +1,163 @@
+/* Macro definitions for i386, Unix System V.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386V_H
+#define TM_I386V_H 1
+
+/* First pick up the generic *86 target file. */
+
+#include "i386/tm-i386.h"
+
+/* Number of traps that happen between exec'ing the shell to run an
+   inferior, and when we finally get to the inferior code.  This is
+   2 on most implementations.  Override here to 4. */
+
+#undef  START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 4
+
+/* Number of machine registers */
+
+#undef  NUM_REGS
+#define NUM_REGS 16
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+/* the order of the first 8 registers must match the compiler's 
+ * numbering scheme (which is the same as the 386 scheme)
+ * also, this table must match regmap in i386-pinsn.c.
+ */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \
+			 "esp", "ebp", "esi", "edi", \
+			 "eip", "ps", "cs", "ss", \
+			 "ds", "es", "fs", "gs", \
+			 }
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#undef  REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) (4)
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#undef  REGISTER_VIRTUAL_SIZE
+#define REGISTER_VIRTUAL_SIZE(N) (4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#undef  MAX_REGISTER_RAW_SIZE
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#undef  MAX_REGISTER_VIRTUAL_SIZE
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+/* Perhaps si and di should go here, but potentially they could be
+   used for things other than address.  */
+
+#undef  REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ?         \
+   lookup_pointer_type (builtin_type_void) : builtin_type_int)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#undef  STORE_STRUCT_RETURN
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { char buf[REGISTER_SIZE];	\
+    (SP) -= sizeof (ADDR);	\
+    store_address (buf, sizeof (ADDR), ADDR);	\
+    write_memory ((SP), buf, sizeof (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#undef  EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy ((VALBUF), (REGBUF), TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#undef  STORE_RETURN_VALUE
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+#undef  FRAME_CHAIN
+#define FRAME_CHAIN(thisframe) \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#undef  FRAMELESS_FUNCTION_INVOCATION
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#undef  FRAME_SAVED_PC
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#undef  FRAME_NUM_ARGS
+#define FRAME_NUM_ARGS(numargs, fi) (numargs) = -1
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct frame_info;
+struct frame_saved_regs;
+#endif
+
+extern int
+i386_frame_num_args PARAMS ((struct frame_info *));
+
+#endif	/* ifndef TM_I386V_H */
diff --git a/gdb/config/i386/tm-i386v4.h b/gdb/config/i386/tm-i386v4.h
new file mode 100644
index 0000000..eafff01
--- /dev/null
+++ b/gdb/config/i386/tm-i386v4.h
@@ -0,0 +1,78 @@
+/* Macro definitions for GDB on an Intel i386 running SVR4.
+   Copyright (C) 1991, 1994 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386V4_H
+#define TM_I386V4_H 1
+
+/* Pick up most of what we need from the generic i386 target include file. */
+
+#include "i386/tm-i386.h"
+
+/* Pick up more stuff from the generic SVR4 host include file. */
+
+#include "tm-sysv4.h"
+
+/* Use the alternate method of determining valid frame chains. */
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+/* Offsets (in target ints) into jmp_buf.  Not defined in any system header
+   file, so we have to step through setjmp/longjmp with a debugger and figure
+   them out.  Note that <setjmp> defines _JBLEN as 10, which is the default
+   if no specific machine is selected, even though we only use 6 slots. */
+
+#define JB_ELEMENT_SIZE sizeof(int)	/* jmp_buf[_JBLEN] is array of ints */
+
+#define JB_EBX	0
+#define JB_ESI	1
+#define JB_EDI	2
+#define JB_EBP	3
+#define JB_ESP	4
+#define JB_EDX	5
+
+#define JB_PC	JB_EDX	/* Setjmp()'s return PC saved in EDX */
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+/* The following redefines make backtracing through sigtramp work.
+   They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp
+   from the ucontext structure which is pushed by the kernel on the
+   user stack. Unfortunately there are three variants of sigtramp handlers.  */
+
+#define I386V4_SIGTRAMP_SAVED_PC
+#define IN_SIGTRAMP(pc, name) ((name)					\
+			       && (STREQ ("_sigreturn", name)		\
+				   || STREQ ("_sigacthandler", name)	\
+				   || STREQ ("sigvechandler", name)))
+
+/* Saved Pc.  Get it from ucontext if within sigtramp.  */
+
+#define sigtramp_saved_pc i386v4_sigtramp_saved_pc
+extern CORE_ADDR i386v4_sigtramp_saved_pc PARAMS ((struct frame_info *));
+
+#endif  /* ifndef TM_I386V4_H */
diff --git a/gdb/config/i386/tm-i386v42mp.h b/gdb/config/i386/tm-i386v42mp.h
new file mode 100644
index 0000000..81df85b
--- /dev/null
+++ b/gdb/config/i386/tm-i386v42mp.h
@@ -0,0 +1,44 @@
+/* Macro definitions for GDB on an Intel i386 running SVR4.2MP
+   Copyright (C) 1991, 1994 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_I386V42MP_H
+#define TM_I386V42MP_H 1
+
+/* pick up more generic x86 sysv4 stuff */
+
+#include "i386/tm-i386v4.h"
+
+/* procfs on this architecture has multiple fds (ctl, as, map, status)
+	including a control fd */
+
+#ifndef HAVE_MULTIPLE_PROC_FDS
+#define HAVE_MULTIPLE_PROC_FDS
+#endif
+
+/* procfs on this architecture communicates with read/write instead
+	of ioctl */
+
+#define PROCFS_USE_READ_WRITE
+
+/* define to select for other sysv4.2mp weirdness */
+
+#define UNIXWARE
+
+#endif  /* ifndef TM_I386V42MP_H */
diff --git a/gdb/config/i386/tm-linux.h b/gdb/config/i386/tm-linux.h
new file mode 100644
index 0000000..417d151
--- /dev/null
+++ b/gdb/config/i386/tm-linux.h
@@ -0,0 +1,38 @@
+/* Definitions to target GDB to GNU/Linux on 386.
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_LINUX_H
+#define TM_LINUX_H
+
+/* FIXME:  If nothing else gets added to this file, it could be removed
+   and configure could just use tm-i386.h instead. -fnf */
+
+#include "i386/tm-i386.h"
+
+/* Offset to saved PC in sigcontext, from <linux/signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 38
+
+/* We need this file for the SOLIB_TRAMPOLINE stuff. */
+
+#include "tm-sysv4.h"
+
+/* The following works around a problem with /usr/include/sys/procfs.h  */
+#define sys_quotactl 1
+
+#endif  /* #ifndef TM_LINUX_H */
diff --git a/gdb/config/i386/tm-nbsd.h b/gdb/config/i386/tm-nbsd.h
new file mode 100644
index 0000000..cf5159f
--- /dev/null
+++ b/gdb/config/i386/tm-nbsd.h
@@ -0,0 +1,42 @@
+/* Macro definitions for i386 running under NetBSD.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_NBSD_H
+#define TM_NBSD_H
+
+#include "i386/tm-i386bsd.h"
+#include "tm-nbsd.h"
+
+#undef NUM_REGS
+#define NUM_REGS 16
+
+#define JB_ELEMENT_SIZE sizeof(int)	/* jmp_buf[_JBLEN] is array of ints */
+#define JB_PC	0			/* Setjmp()'s return PC saved here */
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+#endif /* TM_NBSD_H */
diff --git a/gdb/config/i386/tm-ptx.h b/gdb/config/i386/tm-ptx.h
new file mode 100644
index 0000000..c9f67d7
--- /dev/null
+++ b/gdb/config/i386/tm-ptx.h
@@ -0,0 +1,232 @@
+/* Target machine definitions for GDB on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Symmetry version by Jay Vosburgh (fubar@sequent.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PTX_H
+#define TM_PTX_H 1
+
+/* I don't know if this will work for cross-debugging, even if you do get
+   a copy of the right include file.  */
+
+#include <sys/reg.h>
+
+#ifdef SEQUENT_PTX4
+#include "i386/tm-i386v4.h"
+#else /* !SEQUENT_PTX4 */
+#include "i386/tm-i386v.h"
+#endif
+
+/* Number of traps that happen between exec'ing the shell to run an
+   inferior, and when we finally get to the inferior code.  This is 2
+   on most implementations. Here we have to undo what tm-i386v.h gave
+   us and restore the default. */
+
+#undef START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Amount PC must be decremented by after a breakpoint.  This is often the
+   number of bytes in BREAKPOINT but not always (such as now). */
+
+#undef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 0
+
+#if 0
+ --- this code can't be used unless we know we are running native,
+     since it uses host specific ptrace calls.
+/* code for 80387 fpu.  Functions are from i386-dep.c, copied into
+ * symm-dep.c.
+ */
+#define FLOAT_INFO { i386_float_info(); }
+#endif
+
+/* Number of machine registers */
+
+#undef  NUM_REGS
+#define NUM_REGS 49
+
+/* Initializer for an array of names of registers.  There should be at least
+   NUM_REGS strings in this initializer.  Any excess ones are simply ignored.
+   The order of the first 8 registers must match the compiler's numbering
+   scheme (which is the same as the 386 scheme) and also regmap in the various
+   *-nat.c files. */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES { "eax",  "ecx",    "edx",  "ebx",  \
+			 "esp",  "ebp",    "esi",  "edi",  \
+			 "eip",  "eflags", "st0",  "st1",  \
+			 "st2",  "st3",    "st4",  "st5",  \
+			 "st6",  "st7",    "fp1",  "fp2",  \
+			 "fp3",  "fp4",    "fp5",  "fp6",  \
+			 "fp7",  "fp8",    "fp9",  "fp10", \
+			 "fp11", "fp12",   "fp13", "fp14", \
+			 "fp15", "fp16",   "fp17", "fp18", \
+			 "fp19", "fp20",   "fp21", "fp22", \
+			 "fp23", "fp24",   "fp25", "fp26", \
+			 "fp27", "fp28",   "fp29", "fp30", \
+			 "fp31" }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define EAX_REGNUM	0
+#define ECX_REGNUM	1
+#define EDX_REGNUM	2
+#define EBX_REGNUM	3
+
+#define ESP_REGNUM	4
+#define EBP_REGNUM	5
+
+#define ESI_REGNUM	6
+#define EDI_REGNUM	7
+
+#define EIP_REGNUM	8
+#define EFLAGS_REGNUM	9
+
+#define ST0_REGNUM	10
+#define ST1_REGNUM	11
+#define ST2_REGNUM	12
+#define ST3_REGNUM	13
+
+#define ST4_REGNUM	14
+#define ST5_REGNUM	15
+#define ST6_REGNUM	16
+#define ST7_REGNUM	17
+
+#define FP1_REGNUM 18		/* first 1167 register */
+/* Get %fp2 - %fp31 by addition, since they are contiguous */
+
+#undef  SP_REGNUM
+#define SP_REGNUM ESP_REGNUM	/* Contains address of top of stack */
+#undef  FP_REGNUM
+#define FP_REGNUM EBP_REGNUM	/* Contains address of executing stack frame */
+#undef  PC_REGNUM
+#define PC_REGNUM EIP_REGNUM	/* Contains program counter */
+#undef  PS_REGNUM
+#define PS_REGNUM EFLAGS_REGNUM	/* Contains processor status */
+
+/*
+ * For ptx, this is a little bit bizarre, since the register block
+ * is below the u area in memory.  This means that blockend here ends
+ * up being negative (for the call from coredep.c) since the value in
+ * u.u_ar0 will be less than KERNEL_U_ADDR (and coredep.c passes us
+ * u.u_ar0 - KERNEL_U_ADDR in blockend).  Since we also define
+ * FETCH_INFERIOR_REGISTERS (and supply our own functions for that),
+ * the core file case will be the only use of this function.
+ */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+{ (addr) = ptx_register_u_addr((blockend), (regno)); }
+
+extern int
+ptx_register_u_addr PARAMS ((int, int));
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  10 i*86 registers, 8 i387
+   registers, and 31 Weitek 1167 registers */
+
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES ((10 * 4) + (8 * 10) + (31 * 4))
+
+/* Index within `registers' of the first byte of the space for register N. */
+
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) 		\
+(((N) < ST0_REGNUM) ? ((N) * 4) : \
+ ((N) < FP1_REGNUM) ? (40 + (((N) - ST0_REGNUM) * 10)) : \
+ (40 + 80 + (((N) - FP1_REGNUM) * 4)))
+
+/* Number of bytes of storage in the actual machine representation for
+   register N.  All registers are 4 bytes, except 387 st(0) - st(7),
+   which are 80 bits each. */
+
+#undef  REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) \
+(((N) < ST0_REGNUM) ? 4 : \
+ ((N) < FP1_REGNUM) ? 10 : \
+ 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#undef  MAX_REGISTER_RAW_SIZE
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#undef REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(N) \
+((N < ST0_REGNUM) ? 0 : \
+ (N < FP1_REGNUM) ? 1 : \
+ 0)
+  
+/* Convert data from raw format for register REGNUM
+   to virtual format for register REGNUM.  */
+extern const struct floatformat floatformat_i387_ext; /* from floatformat.h */
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO)	\
+((REGNUM < ST0_REGNUM) ?  (void)memcpy ((TO), (FROM), 4) : \
+ (REGNUM < FP1_REGNUM) ? (void)floatformat_to_double(&floatformat_i387_ext, \
+						       (FROM),(TO)) : \
+ (void)memcpy ((TO), (FROM), 4))
+ 
+/* Convert data from virtual format for register REGNUM
+   to raw format for register REGNUM.  */
+
+#undef REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+((REGNUM < ST0_REGNUM) ?  (void)memcpy ((TO), (FROM), 4) : \
+ (REGNUM < FP1_REGNUM) ? (void)floatformat_from_double(&floatformat_i387_ext, \
+						       (FROM),(TO)) : \
+ (void)memcpy ((TO), (FROM), 4))
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+/*
+ * Note: the 1167 registers (the last line, builtin_type_float) are
+ * generally used in pairs, with each pair being treated as a double.
+ * It it also possible to use them singly as floats.  I'm not sure how
+ * in gdb to treat the register pair pseudo-doubles. -fubar
+ */
+#undef REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+((N < ST0_REGNUM) ? builtin_type_int : \
+ (N < FP1_REGNUM) ? builtin_type_double : \
+ builtin_type_float)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#undef  EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  symmetry_extract_return_value(TYPE, REGBUF, VALBUF)
+
+/*
+#undef  FRAME_FIND_SAVED_REGS
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ ptx_frame_find_saved_regs((frame_info), &(frame_saved_regs)); }
+*/
+
+#endif  /* ifndef TM_PTX_H */
diff --git a/gdb/config/i386/tm-ptx4.h b/gdb/config/i386/tm-ptx4.h
new file mode 100644
index 0000000..a576acc
--- /dev/null
+++ b/gdb/config/i386/tm-ptx4.h
@@ -0,0 +1,24 @@
+/* Target machine definitions for GDB on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Symmetry version by Jay Vosburgh (fubar@sequent.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define SEQUENT_PTX4
+
+#include "tm-ptx.h"
diff --git a/gdb/config/i386/tm-sun386.h b/gdb/config/i386/tm-sun386.h
new file mode 100644
index 0000000..259fd51
--- /dev/null
+++ b/gdb/config/i386/tm-sun386.h
@@ -0,0 +1,205 @@
+/* Parameters for a Sun 386i target machine, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (TM_SUN386_H)
+#define TM_SUN386_H 1
+
+#include "i386/tm-i386.h"
+
+#ifndef sun386
+#define sun386
+#endif
+#define GDB_TARGET_IS_SUN386 1
+#define SUNOS4
+#define USE_MACHINE_REG_H
+
+/* Perhaps some day this will work even without the following #define */
+#define COFF_ENCAPSULATE
+
+#ifdef COFF_ENCAPSULATE
+/* Avoid conflicts between our include files and <sys/exec.h>
+   (maybe not needed anymore).  */
+#define _EXEC_
+#endif
+
+/* sun386 ptrace seems unable to change the frame pointer */
+#define PTRACE_FP_BUG
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR 0xfc000000
+
+/* Number of machine registers */
+
+#undef  NUM_REGS
+#define NUM_REGS 35
+
+/* Initializer for an array of names of registers.  There should be NUM_REGS
+   strings in this initializer.  The order of the first 8 registers must match
+   the compiler's numbering scheme (which is the same as the 386 scheme) also,
+   this table must match regmap in i386-pinsn.c. */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES { "gs", "fs", "es", "ds",		\
+			 "edi", "esi", "ebp", "esp",		\
+			 "ebx", "edx", "ecx", "eax",		\
+			 "retaddr", "trapnum", "errcode", "ip",	\
+			 "cs", "ps", "sp", "ss",		\
+			 "fst0", "fst1", "fst2", "fst3",	\
+			 "fst4", "fst5", "fst6", "fst7",	\
+			 "fctrl", "fstat", "ftag", "fip",	\
+			 "fcs", "fopoff", "fopsel"		\
+			 }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#undef  FP_REGNUM
+#define FP_REGNUM   6	/* (ebp) Contains address of executing stack frame */
+#undef  SP_REGNUM
+#define SP_REGNUM  18	/* (usp) Contains address of top of stack */
+#undef  PS_REGNUM
+#define PS_REGNUM  17	/* (ps)  Contains processor status */
+#undef  PC_REGNUM
+#define PC_REGNUM  15	/* (eip) Contains program counter */
+#undef  FP0_REGNUM
+#define FP0_REGNUM 20	/* Floating point register 0 */
+#undef  FPC_REGNUM
+#define FPC_REGNUM 28	/* 80387 control register */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES (20*4+8*10+7*4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) \
+ ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 160	\
+  : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 10) + 80	\
+  : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#undef  REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 10 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#undef  REGISTER_VIRTUAL_SIZE
+#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 8 : 4)
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#undef  REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(N) (((unsigned)((N) - FP0_REGNUM)) < 8)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#undef  REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  i387_to_double ((FROM), (char *)&val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+extern void
+i387_to_double PARAMS ((char *, char *));
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#undef  REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  double_to_i387((char *)&val, (TO)); \
+}
+extern void
+double_to_i387 PARAMS ((char *, char *));
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#undef  REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (((unsigned)((N) - FP0_REGNUM)) < 8 ? builtin_type_double : builtin_type_int)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#undef  EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF + REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#undef  STORE_RETURN_VALUE
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+#undef  FRAME_CHAIN
+#define FRAME_CHAIN(thisframe) \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#undef  FRAMELESS_FUNCTION_INVOCATION
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+{ (FRAMELESS) = frameless_look_for_prologue (FI); }
+
+#undef  FRAME_SAVED_PC
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#undef  FIX_CALL_DUMMY
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ \
+	*(int *)((char *)(dummyname) + 1) = (int)(fun) - (pc) - 5; \
+}
+
+#endif /* !defined (TM_SUN386_H) */
+
diff --git a/gdb/config/i386/tm-symmetry.h b/gdb/config/i386/tm-symmetry.h
new file mode 100644
index 0000000..11931d4
--- /dev/null
+++ b/gdb/config/i386/tm-symmetry.h
@@ -0,0 +1,321 @@
+/* Target machine definitions for GDB on a Sequent Symmetry under dynix 3.0,
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+   Symmetry version by Jay Vosburgh (fubar@sequent.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_SYMMETRY_H
+#define TM_SYMMETRY_H 1
+
+/* I don't know if this will work for cross-debugging, even if you do get
+   a copy of the right include file.  */
+#include <machine/reg.h>
+
+#include "i386/tm-i386v.h"
+
+#undef START_INFERIOR_TRAPS_EXPECTED
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Amount PC must be decremented by after a breakpoint.  This is often the
+   number of bytes in BREAKPOINT but not always (such as now). */
+
+#undef DECR_PC_AFTER_BREAK
+#define DECR_PC_AFTER_BREAK 0
+
+#if 0
+/* --- this code can't be used unless we know we are running native,
+       since it uses host specific ptrace calls. */
+/* code for 80387 fpu.  Functions are from i386-dep.c, copied into
+ * symm-dep.c.
+ */
+#define FLOAT_INFO { i386_float_info(); }
+#endif
+
+/* Number of machine registers */
+
+#undef NUM_REGS
+#define NUM_REGS 49
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+/* Initializer for an array of names of registers.  There should be at least
+   NUM_REGS strings in this initializer.  Any excess ones are simply ignored.
+   Symmetry registers are in this weird order to match the register numbers
+   in the symbol table entries.  If you change the order, things will probably
+   break mysteriously for no apparent reason.  Also note that the st(0)...
+   st(7) 387 registers are represented as st0...st7.  */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES {     "eax",  "edx",  "ecx",   "st0",  "st1", \
+			     "ebx",  "esi",  "edi",   "st2",  "st3", \
+			     "st4",  "st5",  "st6",   "st7",  "esp", \
+			     "ebp",  "eip",  "eflags","fp1",  "fp2", \
+			     "fp3",  "fp4",  "fp5",   "fp6",  "fp7", \
+			     "fp8",  "fp9",  "fp10",  "fp11", "fp12", \
+			     "fp13", "fp14", "fp15",  "fp16", "fp17", \
+			     "fp18", "fp19", "fp20",  "fp21", "fp22", \
+			     "fp23", "fp24", "fp25",  "fp26", "fp27", \
+			     "fp28", "fp29", "fp30",  "fp31" }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define EAX_REGNUM	0
+#define EDX_REGNUM	1
+#define ECX_REGNUM	2
+#define ST0_REGNUM	3
+#define ST1_REGNUM	4
+#define EBX_REGNUM	5
+#define ESI_REGNUM	6
+#define EDI_REGNUM	7
+#define ST2_REGNUM	8
+#define ST3_REGNUM	9
+
+#define ST4_REGNUM	10
+#define ST5_REGNUM	11
+#define ST6_REGNUM	12
+#define ST7_REGNUM	13
+
+#define FP1_REGNUM 18		/* first 1167 register */
+/* Get %fp2 - %fp31 by addition, since they are contiguous */
+
+#undef  SP_REGNUM
+#define SP_REGNUM 14	/* (usp) Contains address of top of stack */
+#define ESP_REGNUM 14
+#undef  FP_REGNUM
+#define FP_REGNUM 15	/* (ebp) Contains address of executing stack frame */
+#define EBP_REGNUM 15
+#undef  PC_REGNUM
+#define PC_REGNUM 16	/* (eip) Contains program counter */
+#define EIP_REGNUM 16
+#undef  PS_REGNUM
+#define PS_REGNUM 17	/* (ps)  Contains processor status */
+#define EFLAGS_REGNUM 17
+
+/*
+ * Following macro translates i386 opcode register numbers to Symmetry
+ * register numbers.  This is used by i386_frame_find_saved_regs.
+ *
+ *           %eax  %ecx  %edx  %ebx  %esp  %ebp  %esi  %edi
+ * i386        0     1     2     3     4     5     6     7
+ * Symmetry    0     2     1     5    14    15     6     7
+ *
+ */
+#define I386_REGNO_TO_SYMMETRY(n) \
+((n)==0?0 :(n)==1?2 :(n)==2?1 :(n)==3?5 :(n)==4?14 :(n)==5?15 :(n))
+
+/* The magic numbers below are offsets into u_ar0 in the user struct.
+ * They live in <machine/reg.h>.  Gdb calls this macro with blockend
+ * holding u.u_ar0 - KERNEL_U_ADDR.  Only the registers listed are
+ * saved in the u area (along with a few others that aren't useful
+ * here.  See <machine/reg.h>).
+ */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+{ struct user foo;	/* needed for finding fpu regs */ \
+switch (regno) { \
+    case 0: \
+      addr = blockend + EAX * sizeof(int); break; \
+  case 1: \
+      addr = blockend + EDX * sizeof(int); break; \
+  case 2: \
+      addr = blockend + ECX * sizeof(int); break; \
+  case 3:			/* st(0) */ \
+      addr = ((int)&foo.u_fpusave.fpu_stack[0][0] - (int)&foo); \
+      break; \
+  case 4:			/* st(1) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[1][0] - (int)&foo); \
+      break; \
+  case 5: \
+      addr = blockend + EBX * sizeof(int); break; \
+  case 6: \
+      addr = blockend + ESI * sizeof(int); break; \
+  case 7: \
+      addr = blockend + EDI * sizeof(int); break; \
+  case 8:			/* st(2) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[2][0] - (int)&foo); \
+      break; \
+  case 9:			/* st(3) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[3][0] - (int)&foo); \
+      break; \
+  case 10:			/* st(4) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[4][0] - (int)&foo); \
+      break; \
+  case 11:			/* st(5) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[5][0] - (int)&foo); \
+      break; \
+  case 12:			/* st(6) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[6][0] - (int)&foo); \
+      break; \
+  case 13:			/* st(7) */ \
+      addr = ((int) &foo.u_fpusave.fpu_stack[7][0] - (int)&foo); \
+      break; \
+  case 14: \
+      addr = blockend + ESP * sizeof(int); break; \
+  case 15: \
+      addr = blockend + EBP * sizeof(int); break; \
+  case 16: \
+      addr = blockend + EIP * sizeof(int); break; \
+  case 17: \
+      addr = blockend + FLAGS * sizeof(int); break; \
+  case 18:			/* fp1 */ \
+  case 19:			/* fp2 */ \
+  case 20:			/* fp3 */ \
+  case 21:			/* fp4 */ \
+  case 22:			/* fp5 */ \
+  case 23:			/* fp6 */ \
+  case 24:			/* fp7 */ \
+  case 25:			/* fp8 */ \
+  case 26:			/* fp9 */ \
+  case 27:			/* fp10 */ \
+  case 28:			/* fp11 */ \
+  case 29:			/* fp12 */ \
+  case 30:			/* fp13 */ \
+  case 31:			/* fp14 */ \
+  case 32:			/* fp15 */ \
+  case 33:			/* fp16 */ \
+  case 34:			/* fp17 */ \
+  case 35:			/* fp18 */ \
+  case 36:			/* fp19 */ \
+  case 37:			/* fp20 */ \
+  case 38:			/* fp21 */ \
+  case 39:			/* fp22 */ \
+  case 40:			/* fp23 */ \
+  case 41:			/* fp24 */ \
+  case 42:			/* fp25 */ \
+  case 43:			/* fp26 */ \
+  case 44:			/* fp27 */ \
+  case 45:			/* fp28 */ \
+  case 46:			/* fp29 */ \
+  case 47:			/* fp30 */ \
+  case 48:			/* fp31 */ \
+     addr = ((int) &foo.u_fpasave.fpa_regs[(regno)-18] - (int)&foo); \
+  } \
+}
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  10 i*86 registers, 8 i387
+   registers, and 31 Weitek 1167 registers */
+
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES ((10 * 4) + (8 * 10) + (31 * 4))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) 		\
+(((N) < 3) ? ((N) * 4) :		\
+((N) < 5) ? ((((N) - 2) * 10) + 2) :	\
+((N) < 8) ? ((((N) - 5) * 4) + 32) :	\
+((N) < 14) ? ((((N) - 8) * 10) + 44) :	\
+    ((((N) - 14) * 4) + 104))
+
+/* Number of bytes of storage in the actual machine representation
+ * for register N.  All registers are 4 bytes, except 387 st(0) - st(7),
+ * which are 80 bits each. 
+ */
+
+#undef  REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) \
+(((N) < 3) ? 4 :	\
+((N) < 5) ? 10 :	\
+((N) < 8) ? 4 :		\
+((N) < 14) ? 10 :	\
+    4)
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#undef  REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(N) \
+(((N) < 3) ? 0 : \
+((N) < 5) ? 1  : \
+((N) < 8) ? 0  : \
+((N) < 14) ? 1 : \
+    0)
+
+#include "floatformat.h"
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  floatformat_to_double (&floatformat_i387_ext, (FROM), &val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#undef REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  floatformat_from_double (&floatformat_i387_ext, &val, (TO)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#undef REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+((N < 3) ? builtin_type_int : \
+(N < 5) ? builtin_type_double : \
+(N < 8) ? builtin_type_int : \
+(N < 14) ? builtin_type_double : \
+    builtin_type_int)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function.
+   Native cc passes the address in eax, gcc (up to version 2.5.8)
+   passes it on the stack.  gcc should be fixed in future versions to
+   adopt native cc conventions.  */
+
+#undef  STORE_STRUCT_RETURN
+#define STORE_STRUCT_RETURN(ADDR, SP) write_register(0, (ADDR))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#undef  EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  symmetry_extract_return_value(TYPE, REGBUF, VALBUF)
+
+/* The following redefines make backtracing through sigtramp work.
+   They manufacture a fake sigtramp frame and obtain the saved pc in sigtramp
+   from the sigcontext structure which is pushed by the kernel on the
+   user stack, along with a pointer to it.  */
+
+#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigcode", name))
+
+/* Offset to saved PC in sigcontext, from <signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 16
+
+#endif	/* ifndef TM_SYMMETRY_H */
+
diff --git a/gdb/config/i386/xm-cygwin.h b/gdb/config/i386/xm-cygwin.h
new file mode 100644
index 0000000..f0b8227
--- /dev/null
+++ b/gdb/config/i386/xm-cygwin.h
@@ -0,0 +1,34 @@
+/* Definitions for hosting on WIN32, for GDB.
+   Copyright 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#include "fopen-bin.h"
+
+#define GDBINIT_FILENAME "gdb.ini"
+
+#define SLASH_P(X) ((X)=='\\' || (X) == '/')
+#define ROOTED_P(X) ((SLASH_P((X)[0]))|| ((X)[1] ==':'))
+#define SLASH_CHAR '/'
+#define SLASH_STRING "/"
+
+/* Define this if source files use \r\n rather than just \n.  */
+#define CRLF_SOURCE_FILES
+
+#define HAVE_SIGSETMASK 0
diff --git a/gdb/config/i386/xm-go32.h b/gdb/config/i386/xm-go32.h
new file mode 100644
index 0000000..0797833
--- /dev/null
+++ b/gdb/config/i386/xm-go32.h
@@ -0,0 +1,31 @@
+/* Definitions for hosting on GO32, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#include "fopen-bin.h"
+
+/* Define this lseek(n) != nth byte of file */
+#define LSEEK_NOT_LINEAR
+
+#define CANT_FORK
+
+#undef QUIT
+#define QUIT  { pollquit(); }
+
+#define GDBINIT_FILENAME "gdb.ini"
diff --git a/gdb/config/i386/xm-i386aix.h b/gdb/config/i386/xm-i386aix.h
new file mode 100644
index 0000000..652a149
--- /dev/null
+++ b/gdb/config/i386/xm-i386aix.h
@@ -0,0 +1,33 @@
+/* Macro defintions for AIX PS/2 (i386)
+   Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Changed for IBM AIX ps/2 by Minh Tran Le (tranle@intellicorp.com)
+ * Revision:	23-Oct-92 17:42:49
+ */
+
+#include "i386/xm-i386v.h"
+
+#undef HAVE_TERMIO
+#define HAVE_SGTTY
+
+#include <limits.h>
+
+/* Use setpgid instead of setpgrp on AIX */
+#define NEED_POSIX_SETPGID
diff --git a/gdb/config/i386/xm-i386bsd.h b/gdb/config/i386/xm-i386bsd.h
new file mode 100644
index 0000000..e5c4c89
--- /dev/null
+++ b/gdb/config/i386/xm-i386bsd.h
@@ -0,0 +1,22 @@
+/* Host-dependent definitions for Intel 386 running BSD Unix, for GDB.
+   Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#include <machine/limits.h>		/* for INT_MIN */
diff --git a/gdb/config/i386/xm-i386gnu.h b/gdb/config/i386/xm-i386gnu.h
new file mode 100644
index 0000000..60307b2
--- /dev/null
+++ b/gdb/config/i386/xm-i386gnu.h
@@ -0,0 +1,23 @@
+/* Definitions to make GDB run on the GNU Hurd on an Intel 386
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* Do implement the attach and detach commands.  */
+#define ATTACH_DETACH	1
diff --git a/gdb/config/i386/xm-i386lynx.h b/gdb/config/i386/xm-i386lynx.h
new file mode 100644
index 0000000..6078cb6
--- /dev/null
+++ b/gdb/config/i386/xm-i386lynx.h
@@ -0,0 +1,24 @@
+/* Host-dependent definitions for Intel 386 running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* Get generic LynxOS host definitions. */
+
+#include "xm-lynx.h"
diff --git a/gdb/config/i386/xm-i386m3.h b/gdb/config/i386/xm-i386m3.h
new file mode 100644
index 0000000..b667409
--- /dev/null
+++ b/gdb/config/i386/xm-i386m3.h
@@ -0,0 +1,33 @@
+/* Definitions to make GDB run on Mach 3 on an Intel 386
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* Do implement the attach and detach commands.  */
+#define ATTACH_DETACH	1
+
+/* Not needeed */
+#define KERNEL_U_ADDR 0
+
+#ifndef EMULATOR_BASE
+/* For EMULATOR_BASE and EMULATOR_END.
+ * OSF 1/MK has different values in some other place.
+ */
+#include <machine/vmparam.h>
+#endif /* EMULATOR_BASE */
diff --git a/gdb/config/i386/xm-i386mach.h b/gdb/config/i386/xm-i386mach.h
new file mode 100644
index 0000000..eb47bfb
--- /dev/null
+++ b/gdb/config/i386/xm-i386mach.h
@@ -0,0 +1,30 @@
+/* Definitions to make GDB run on Mach on an Intel 386
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG))
+
+/* <errno.h> only defines this if __STDC__!!! */
+extern int errno;
+
+extern char *strdup();
diff --git a/gdb/config/i386/xm-i386mk.h b/gdb/config/i386/xm-i386mk.h
new file mode 100644
index 0000000..661c9cb
--- /dev/null
+++ b/gdb/config/i386/xm-i386mk.h
@@ -0,0 +1,25 @@
+/* Definitions to make GDB run on Mach 3 OSF 1/MK on an Intel 386
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HAVE_TERMIO	1
+
+#define EMULATOR_BASE	0xa0000000
+#define EMULATOR_END	0xa0040000
+
+#include "i386/xm-i386m3.h"
diff --git a/gdb/config/i386/xm-i386sco.h b/gdb/config/i386/xm-i386sco.h
new file mode 100644
index 0000000..31fa7e6
--- /dev/null
+++ b/gdb/config/i386/xm-i386sco.h
@@ -0,0 +1,42 @@
+/* Macro defintions for i386, running SCO Unix System V/386 3.2.
+   Copyright (C) 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* In 3.2v4 <sys/user.h> requires on <sys/dir.h>.  */
+#include <sys/types.h>
+#include <sys/dir.h>
+
+#include "i386/xm-i386v.h"
+
+/* Apparently there is inconsistency among various System V's about what
+   the name of this field is.  */
+#define U_FPSTATE(u) u.u_fps.u_fpstate
+
+/* SCO 3.2v2 and later have job control.  */
+/* SCO 3.2v4 I know has termios; I'm not sure about earlier versions.
+   GDB does not currently support the termio/job control combination.  */
+#undef HAVE_TERMIO
+#define HAVE_TERMIOS
+
+/* SCO's assembler doesn't grok dollar signs in identifiers.
+   So we use dots instead.  This item must be coordinated with G++. */
+#undef CPLUS_MARKER
+#define CPLUS_MARKER '.'
+
+/* Use setpgid instead of setpgrp on SCO */
+#define NEED_POSIX_SETPGID
diff --git a/gdb/config/i386/xm-i386v.h b/gdb/config/i386/xm-i386v.h
new file mode 100644
index 0000000..480dfd6
--- /dev/null
+++ b/gdb/config/i386/xm-i386v.h
@@ -0,0 +1,45 @@
+/* Host support for i386.
+   Copyright 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+   Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu), July 1988.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* I'm running gdb 3.4 under 386/ix 2.0.2, which is a derivative of AT&T's
+Sys V/386 3.2.
+
+On some machines, gdb crashes when it's starting up while calling the
+vendor's termio tgetent() routine.  It always works when run under
+itself (actually, under 3.2, it's not an infinitely recursive bug.)
+After some poking around, it appears that depending on the environment
+size, or whether you're running YP, or the phase of the moon or something,
+the stack is not always long-aligned when main() is called, and tgetent()
+takes strong offense at that.  On some machines this bug never appears, but
+on those where it does, it occurs quite reliably.  */
+#define ALIGN_STACK_ON_STARTUP
+
+/* define USG if you are using sys5 /usr/include's */
+#define USG
+
+#define HAVE_TERMIO
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR 0xe0000000
+
diff --git a/gdb/config/i386/xm-i386v32.h b/gdb/config/i386/xm-i386v32.h
new file mode 100644
index 0000000..daaac80
--- /dev/null
+++ b/gdb/config/i386/xm-i386v32.h
@@ -0,0 +1,24 @@
+/* Macro defintions for i386, running System V 3.2.
+   Copyright (C) 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "i386/xm-i386v.h"
+
+/* Apparently there is inconsistency among various System V's about what
+   the name of this field is.  */
+#define U_FPSTATE(u) u.u_fps.u_fpstate
diff --git a/gdb/config/i386/xm-i386v4.h b/gdb/config/i386/xm-i386v4.h
new file mode 100644
index 0000000..7f782db
--- /dev/null
+++ b/gdb/config/i386/xm-i386v4.h
@@ -0,0 +1,27 @@
+/* Macro definitions for GDB on an Intel i386 running SVR4.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Pick up most of what we need from the generic i386 host include file. */
+
+#include "i386/xm-i386v.h"
+
+/* Pick up more stuff from the generic SVR4 host include file. */
+
+#include "xm-sysv4.h"
diff --git a/gdb/config/i386/xm-linux.h b/gdb/config/i386/xm-linux.h
new file mode 100644
index 0000000..217c6d4
--- /dev/null
+++ b/gdb/config/i386/xm-linux.h
@@ -0,0 +1,36 @@
+/* Native support for GNU/Linux, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef XM_LINUX_H
+#define XM_LINUX_H
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#define HAVE_TERMIOS
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+#define KERNEL_U_ADDR 0x0
+
+#define NEED_POSIX_SETPGID
+
+/* Need R_OK etc, but USG isn't defined.  */
+#include <unistd.h>
+
+#endif	/* #ifndef XM_LINUX_H */
diff --git a/gdb/config/i386/xm-nbsd.h b/gdb/config/i386/xm-nbsd.h
new file mode 100644
index 0000000..b5624ac
--- /dev/null
+++ b/gdb/config/i386/xm-nbsd.h
@@ -0,0 +1,21 @@
+/* Parameters for execution on a i386 running NetBSD, for GDB.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic NetBSD host definitions. */
+#include "xm-nbsd.h"
diff --git a/gdb/config/i386/xm-ptx.h b/gdb/config/i386/xm-ptx.h
new file mode 100644
index 0000000..99b46cc
--- /dev/null
+++ b/gdb/config/i386/xm-ptx.h
@@ -0,0 +1,41 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx, with
+   Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1992, 1993, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
+
+#ifdef _SEQUENT_PTX4_
+#include "xm-sysv4.h"
+#endif /* _SEQUENT_PTX4_ */
+
+/* This machine doesn't have the siginterrupt call.  */
+#define NO_SIGINTERRUPT
+
+#define HAVE_WAIT_STRUCT
+
+#undef HAVE_TERMIO
+#define HAVE_TERMIOS
+#define USG
+
+#define NEED_POSIX_SETPGID
+
+#define USE_O_NOCTTY
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
diff --git a/gdb/config/i386/xm-ptx4.h b/gdb/config/i386/xm-ptx4.h
new file mode 100644
index 0000000..bdbdefd
--- /dev/null
+++ b/gdb/config/i386/xm-ptx4.h
@@ -0,0 +1,25 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx, with
+   Weitek 1167 and i387 support.  Copyright 1986, 1987, 1989, 1992,
+   1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
+
+#include "xm-sysv4.h"
+
+#include "xm-ptx.h"
diff --git a/gdb/config/i386/xm-sun386.h b/gdb/config/i386/xm-sun386.h
new file mode 100644
index 0000000..51c3b58
--- /dev/null
+++ b/gdb/config/i386/xm-sun386.h
@@ -0,0 +1,20 @@
+/* Host support for Sun 386i, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
diff --git a/gdb/config/i386/xm-symmetry.h b/gdb/config/i386/xm-symmetry.h
new file mode 100644
index 0000000..52e9a9a
--- /dev/null
+++ b/gdb/config/i386/xm-symmetry.h
@@ -0,0 +1,28 @@
+/* Definitions to make GDB run on a Sequent Symmetry under
+   dynix 3.1, with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1992, 1993, 1994  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
+
+/* This machine doesn't have the siginterrupt call.  */
+#define NO_SIGINTERRUPT
+
+#define HAVE_WAIT_STRUCT
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
diff --git a/gdb/config/i386/xm-windows.h b/gdb/config/i386/xm-windows.h
new file mode 100644
index 0000000..e083010
--- /dev/null
+++ b/gdb/config/i386/xm-windows.h
@@ -0,0 +1,35 @@
+/* Definitions for hosting on WIN32, built with Microsoft Visual C/C++, for GDB.
+   Copyright 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "i386/xm-cygwin.h"
+
+#undef PRINTF_HAS_LONG_LONG
+#undef HAVE_UNISTD_H
+#undef HAVE_TERMIO_H
+#undef HAVE_TERMIOS_H
+#undef HAVE_SGTTY_H
+#undef HAVE_SBRK
+#define CANT_FORK
+
+#define MALLOC_INCOMPATIBLE
+
+#include <malloc.h>
+
+#define SIGQUIT 3
+#define SIGTRAP 5
diff --git a/gdb/config/i960/mon960.mt b/gdb/config/i960/mon960.mt
new file mode 100644
index 0000000..6cd7345
--- /dev/null
+++ b/gdb/config/i960/mon960.mt
@@ -0,0 +1,6 @@
+# Target: Intel 960 rom monitor
+TDEPFILES= i960-tdep.o monitor.o mon960-rom.o ttyflush.o xmodem.o dsrec.o
+TM_FILE= tm-mon960.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/i960/libsim.a
+
diff --git a/gdb/config/i960/nindy960.mt b/gdb/config/i960/nindy960.mt
new file mode 100644
index 0000000..f37c1da
--- /dev/null
+++ b/gdb/config/i960/nindy960.mt
@@ -0,0 +1,3 @@
+# Target: Intel 80960, in an embedded system under the NINDY monitor
+TDEPFILES= i960-tdep.o nindy-tdep.o remote-nindy.o nindy.o Onindy.o ttyflush.o
+TM_FILE= tm-nindy960.h
diff --git a/gdb/config/i960/tm-i960.h b/gdb/config/i960/tm-i960.h
new file mode 100644
index 0000000..a6d93b0
--- /dev/null
+++ b/gdb/config/i960/tm-i960.h
@@ -0,0 +1,372 @@
+/* Parameters for target machine Intel 960, for GDB, the GNU debugger.
+   Copyright (C) 1990, 1991, 1993 Free Software Foundation, Inc.
+   Contributed by Intel Corporation.
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Definitions to target GDB to any i960.  */
+
+#ifndef I80960
+#define I80960
+#endif
+
+/* Hook for the SYMBOL_CLASS of a parameter when decoding DBX symbol
+   information.  In the i960, parameters can be stored as locals or as
+   args, depending on the type of the debug record.
+
+   From empirical observation, gcc960 uses N_LSYM to indicate
+   arguments passed in registers and then copied immediately
+   to the frame, and N_PSYM to indicate arguments passed in a
+   g14-relative argument block.  */
+
+#define	DBX_PARM_SYMBOL_CLASS(type) ((type == N_LSYM)? LOC_LOCAL_ARG: LOC_ARG)
+
+/* Byte order is configurable, but this machine runs little-endian.  */
+#define	TARGET_BYTE_ORDER	LITTLE_ENDIAN
+
+/* We have IEEE floating point, if we have any float at all.  */
+
+#define IEEE_FLOAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance ip across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)	{ ip = skip_prologue (ip); }
+extern CORE_ADDR skip_prologue ();
+
+/* Immediately after a function call, return the saved ip.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function
+   executes some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) (saved_pc_after_call (frame))
+extern CORE_ADDR saved_pc_after_call ();
+
+/* Stack grows upward */
+
+#define INNER_THAN(lhs,rhs) ((lhs) > (rhs))
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+#define NUM_REGS 40
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES { \
+	/*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+	/*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+	/* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+	/* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+	/* 32 */ "pcw", "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+}
+
+/* Register numbers of various important registers (used to index
+   into arrays of register names and register values).  */
+
+#define R0_REGNUM   0	/* First local register		*/
+#define SP_REGNUM   1	/* Contains address of top of stack */
+#define RIP_REGNUM  2	/* Return instruction pointer (local r2) */
+#define R15_REGNUM 15	/* Last local register		*/
+#define G0_REGNUM  16	/* First global register	*/
+#define G13_REGNUM 29	/* g13 - holds struct return address */
+#define G14_REGNUM 30	/* g14 - ptr to arg block / leafproc return address */
+#define FP_REGNUM  31	/* Contains address of executing stack frame */
+#define	PCW_REGNUM 32	/* process control word */
+#define	ACW_REGNUM 33	/* arithmetic control word */
+#define	TCW_REGNUM 34	/* trace control word */
+#define IP_REGNUM  35	/* instruction pointer */
+#define FP0_REGNUM 36	/* First floating point register */
+
+/* Some registers have more than one name */
+
+#define PC_REGNUM  IP_REGNUM	/* GDB refers to ip as the Program Counter */
+#define PFP_REGNUM R0_REGNUM	/* Previous frame pointer	*/
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES ((36*4) + (4*10))
+
+/* Index within `registers' of the first byte of the space for register N.  */
+
+#define REGISTER_BYTE(N) ( (N) < FP0_REGNUM ? \
+				(4*(N)) : ((10*(N)) - (6*FP0_REGNUM)) )
+
+/* The i960 has register windows, sort of.  */
+
+#define HAVE_REGISTER_WINDOWS
+
+/* Is this register part of the register window system?  A yes answer
+   implies that 1) The name of this register will not be the same in
+   other frames, and 2) This register is automatically "saved" upon
+   subroutine calls and thus there is no need to search more than one
+   stack frame for it.
+   
+   On the i960, in fact, the name of this register in another frame is
+   "mud" -- there is no overlap between the windows.  Each window is
+   simply saved into the stack (true for our purposes, after having been
+   flushed; normally they reside on-chip and are restored from on-chip
+   without ever going to memory).  */
+
+#define REGISTER_IN_WINDOW_P(regnum)	((regnum) <= R15_REGNUM)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the i960, all regs are 4 bytes except for floating
+   point, which are 10.  NINDY only sends us 8 byte values for these,
+   which is a pain, but VxWorks handles this correctly, so we must.  */
+
+#define REGISTER_RAW_SIZE(N)		( (N) < FP0_REGNUM ? 4 : 10 )
+
+/* Number of bytes of storage in the program's representation for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N)	( (N) < FP0_REGNUM ? 4 : 8 )
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion from raw format to virtual
+   format.  */
+
+#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM)
+
+#include "floatformat.h"
+
+#define TARGET_LONG_DOUBLE_FORMAT &floatformat_i960_ext
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO)	\
+{ \
+  DOUBLEST val; \
+  floatformat_to_doublest (&floatformat_i960_ext, (FROM), &val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+{ \
+  DOUBLEST val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  floatformat_from_doublest (&floatformat_i960_ext, &val, (TO)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) ((N) < FP0_REGNUM ? \
+					builtin_type_int : builtin_type_double)
+
+/* Macros for understanding function return values... */
+
+/* Does the specified function use the "struct returning" convention
+   or the "value returning" convention?  The "value returning" convention
+   almost invariably returns the entire value in registers.  The
+   "struct returning" convention often returns the entire value in
+   memory, and passes a pointer (out of or into the function) saying
+   where the value (is or should go).
+
+   Since this sometimes depends on whether it was compiled with GCC,
+   this is also an argument.  This is used in call_function to build a
+   stack, and in value_being_returned to print return values.
+
+   On i960, a structure is returned in registers g0-g3, if it will fit.
+   If it's more than 16 bytes long, g13 pointed to it on entry.  */
+
+extern use_struct_convention_fn i960_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) i960_use_struct_convention (gcc_p, type)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  This is only called if USE_STRUCT_CONVENTION for this
+   type is 0.
+
+   On the i960 we just take as many bytes as we need from G0 through G3.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+	memcpy(VALBUF, REGBUF+REGISTER_BYTE(G0_REGNUM), TYPE_LENGTH (TYPE))
+
+/* If USE_STRUCT_CONVENTION produces a 1, 
+   extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).
+
+   Address of where to put structure was passed in in global
+   register g13 on entry.  God knows what's in g13 now.  The
+   (..., 0) below is to make it appear to return a value, though
+   actually all it does is call error().  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+   (error("Don't know where large structure is returned on i960"), 0)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format, for "value returning" functions.
+  
+   For 'return' command:  not (yet) implemented for i960.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    error ("Returning values from functions is not implemented in i960 gdb")
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    error ("Returning values from functions is not implemented in i960 gdb")
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+/* We cache information about saved registers in the frame structure,
+   to save us from having to re-scan function prologues every time
+   a register in a non-current frame is accessed.  */
+
+#define EXTRA_FRAME_INFO 	\
+	struct frame_saved_regs *fsr;	\
+	CORE_ADDR arg_pointer;
+
+/* Zero the frame_saved_regs pointer when the frame is initialized,
+   so that FRAME_FIND_SAVED_REGS () will know to allocate and
+   initialize a frame_saved_regs struct the first time it is called.
+   Set the arg_pointer to -1, which is not valid; 0 and other values
+   indicate real, cached values.  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+	((fi)->fsr = 0, (fi)->arg_pointer = -1)
+
+/* On the i960, we get the chain pointer by reading the PFP saved
+   on the stack and clearing the status bits.  */
+
+#define FRAME_CHAIN(thisframe) \
+  (read_memory_integer (FRAME_FP(thisframe), 4) & ~0xf)
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type must define FRAME_CHAIN_VALID,
+   since it differs between NINDY and VxWorks, the two currently supported
+   targets types.  We leave it undefined here.  */
+
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  { (FRAMELESS) = (leafproc_return ((FI)->pc) != 0); }
+
+/* Note that in the i960 architecture the return pointer is saved in the
+   *caller's* stack frame.
+  
+   Make sure to zero low-order bits because of bug in 960CA A-step part
+   (instruction addresses should always be word-aligned anyway).  */
+
+#define FRAME_SAVED_PC(frame) \
+			((read_memory_integer(FRAME_CHAIN(frame)+8,4)) & ~3)
+
+/* On the i960, FRAME_ARGS_ADDRESS should return the value of
+   g14 as passed into the frame, if known.  We need a function for this.
+   We cache this value in the frame info if we've already looked it up.  */
+
+#define FRAME_ARGS_ADDRESS(fi) 	\
+  (((fi)->arg_pointer != -1)? (fi)->arg_pointer: frame_args_address (fi, 0))
+extern CORE_ADDR frame_args_address ();		/* i960-tdep.c */
+
+/* This is the same except it should return 0 when
+   it does not really know where the args are, rather than guessing.
+   This value is not cached since it is only used infrequently.  */
+
+#define	FRAME_ARGS_ADDRESS_CORRECT(fi)	(frame_args_address (fi, 1))
+
+#define FRAME_LOCALS_ADDRESS(fi)	(fi)->frame
+
+/* Set NUMARGS to the number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)	(numargs = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Produce the positions of the saved registers in a stack frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info_addr, sr) \
+	frame_find_saved_regs (frame_info_addr, &sr)
+extern void frame_find_saved_regs();		/* See i960-tdep.c */
+
+/* Things needed for making calls to functions in the inferior process */
+
+/* Push an empty stack frame, to record the current ip, etc.
+  
+   Not (yet?) implemented for i960.  */
+
+#define PUSH_DUMMY_FRAME	\
+error("Function calls into the inferior process are not supported on the i960")
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME \
+	pop_frame ()
+
+
+/* This sequence of words is the instructions
+  
+  	callx 0x00000000
+  	fmark
+ */
+
+/* #define CALL_DUMMY { 0x86003000, 0x00000000, 0x66003e00 } */
+
+/* #define CALL_DUMMY_START_OFFSET 0 *//* Start execution at beginning of dummy */
+
+/* Indicate that we don't support calling inferior child functions.  */
+
+#undef CALL_DUMMY
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at 'dummyname'.
+  
+   Ignore arg count on i960.  */
+
+/* #define FIX_CALL_DUMMY(dummyname, fun, nargs) *(((int *)dummyname)+1) = fun */
+
+#undef FIX_CALL_DUMMY
+
+
+/* Interface definitions for kernel debugger KDB */
+/* (Not relevant to i960.) */
diff --git a/gdb/config/i960/tm-mon960.h b/gdb/config/i960/tm-mon960.h
new file mode 100644
index 0000000..e441e05
--- /dev/null
+++ b/gdb/config/i960/tm-mon960.h
@@ -0,0 +1,70 @@
+/* Parameters for Intel 960 running MON960 monitor, for GDB, the GNU debugger.
+   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*****************************************************************************
+ * Definitions to target GDB to an i960 debugged over a serial line.
+ ******************************************************************************/
+
+#include "i960/tm-i960.h"
+
+/* forward declarations */
+#ifdef __STDC__
+struct frame_info;
+#endif
+
+/* redefined from tm-i960.h */
+/* Number of machine registers */
+#undef NUM_REGS 
+#define NUM_REGS 40
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+#undef REGISTER_NAMES 
+#define REGISTER_NAMES { \
+	/*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+	/*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+	/* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+	/* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+	/* 32 */ "pc",  "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+}
+
+/* Override the standard gdb prompt when compiled for this target.  */
+
+#define	DEFAULT_PROMPT	"(gdb960) "
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type defines FRAME_CHAIN_VALID,
+   since it differs between Nindy, Mon960 and VxWorks, the currently supported
+   target types.  */
+
+extern int mon960_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define	FRAME_CHAIN_VALID(chain, thisframe) mon960_frame_chain_valid (chain, thisframe)
+
+/* Sequence of bytes for breakpoint instruction */
+
+#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66}
+
+/* Amount ip must be decremented by after a breakpoint.
+ * This is often the number of bytes in BREAKPOINT but not always.
+ */
+
+#define DECR_PC_AFTER_BREAK 4
diff --git a/gdb/config/i960/tm-nindy960.h b/gdb/config/i960/tm-nindy960.h
new file mode 100644
index 0000000..d0c46c0
--- /dev/null
+++ b/gdb/config/i960/tm-nindy960.h
@@ -0,0 +1,106 @@
+/* Parameters for Intel 960 running NINDY monitor, for GDB, the GNU debugger.
+   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*****************************************************************************
+ * Definitions to target GDB to an i960 debugged over a serial line.
+ ******************************************************************************/
+
+#include "i960/tm-i960.h"
+
+/* forward declarations */
+#ifdef __STDC__
+struct frame_info;
+#endif
+
+/* Override the standard gdb prompt when compiled for this target.  */
+
+#define	DEFAULT_PROMPT	"(gdb960) "
+
+/* Additional command line options accepted by nindy gdb's, for handling
+   the remote-nindy.c interface.  These should really be target-specific
+   rather than architecture-specific.  */
+
+extern int nindy_old_protocol;	/* nonzero if old NINDY serial protocol */
+extern int nindy_initial_brk;	/* Send a BREAK to reset board first */
+extern char *nindy_ttyname;	/* Name of serial port to talk to nindy */
+
+#define	ADDITIONAL_OPTIONS \
+	{"O", no_argument, &nindy_old_protocol, 1},	\
+	{"brk", no_argument, &nindy_initial_brk, 1},	\
+	{"ser", required_argument, 0, 1004},  /* 1004 is magic cookie for ADDL_CASES */
+
+#define	ADDITIONAL_OPTION_CASES	\
+	case 1004:	/* -ser option:  remote nindy auto-start */	\
+	  nindy_ttyname = optarg;	\
+	  break;
+
+#define	ADDITIONAL_OPTION_HELP \
+	"\
+  -O                Use old protocol to talk to a Nindy target\n\
+  -brk              Send a break to a Nindy target to reset it.\n\
+  -ser SERIAL       Open remote Nindy session to SERIAL port.\n\
+"
+
+/* If specified on the command line, open tty for talking to nindy,
+   and download the executable file if one was specified.  */
+
+#define	ADDITIONAL_OPTION_HANDLER	\
+	if (!SET_TOP_LEVEL () && nindy_ttyname) {		\
+	  nindy_open (nindy_ttyname, !batch);			\
+	  if (!SET_TOP_LEVEL () && execarg) {			\
+		target_load (execarg, !batch);			\
+	  }							\
+	}
+
+/* If configured for i960 target, we take control before main loop
+   and demand that we configure for a nindy target.  */
+
+#define	BEFORE_MAIN_LOOP_HOOK	\
+  nindy_before_main_loop();
+
+extern void
+nindy_before_main_loop();		/* In remote-nindy.c */
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type defines FRAME_CHAIN_VALID,
+   since it differs between NINDY and VxWorks, the two currently supported
+   targets types.  */
+
+extern int nindy_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define	FRAME_CHAIN_VALID(chain, thisframe) nindy_frame_chain_valid (chain, thisframe)
+
+extern int
+nindy_frame_chain_valid();		/* See nindy-tdep.c */
+
+/* Sequence of bytes for breakpoint instruction */
+
+#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66}
+
+/* Amount ip must be decremented by after a breakpoint.
+ * This is often the number of bytes in BREAKPOINT but not always.
+ */
+
+#define DECR_PC_AFTER_BREAK 0
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#undef REGISTER_CONVERT_TO_RAW
+#undef REGISTER_CONVERTIBLE
diff --git a/gdb/config/i960/tm-vx960.h b/gdb/config/i960/tm-vx960.h
new file mode 100644
index 0000000..17e2811
--- /dev/null
+++ b/gdb/config/i960/tm-vx960.h
@@ -0,0 +1,53 @@
+/* Parameters for VxWorks Intel 960's, for GDB, the GNU debugger.
+   Copyright (C) 1986-1991 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "i960/tm-i960.h"
+
+/* Under VxWorks the IP isn't filled in.  Skip it, go with RIP, which has
+   the real value.  */
+#undef PC_REGNUM
+#define PC_REGNUM RIP_REGNUM
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+/* We have more complex, useful breakpoints on the target.
+   Amount ip must be decremented by after a breakpoint.  */
+
+#define	DECR_PC_AFTER_BREAK	0
+
+/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
+
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
+
+/* Breakpoint patching is handled at the target end in VxWorks.  */
+/* #define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} */
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (16 + 16 + 3)
+
+/* Number of registers in a ptrace_getfpregs call. */
+
+    /* @@ Can't use this -- the rdb library for the 960 target
+       doesn't support setting or retrieving FP regs.  KR  */
+
+/* #define VX_SIZE_FPREGS (REGISTER_RAW_SIZE (FP0_REGNUM) * 4) */
diff --git a/gdb/config/i960/vxworks960.mt b/gdb/config/i960/vxworks960.mt
new file mode 100644
index 0000000..ad32934
--- /dev/null
+++ b/gdb/config/i960/vxworks960.mt
@@ -0,0 +1,6 @@
+# Target: VxWorks running on an Intel 960
+TDEPFILES= i960-tdep.o remote-vx.o remote-vx960.o xdr_ld.o xdr_ptrace.o xdr_rdb.o
+TM_FILE= tm-vx960.h
+
+# Define this for the vx-share routines, which don't see param.h.
+MT_CFLAGS= -DI80960
diff --git a/gdb/config/m32r/m32r.mt b/gdb/config/m32r/m32r.mt
new file mode 100644
index 0000000..8b95705
--- /dev/null
+++ b/gdb/config/m32r/m32r.mt
@@ -0,0 +1,7 @@
+# Target: Mitsubishi m32r processor
+TDEPFILES= m32r-tdep.o monitor.o m32r-rom.o dsrec.o
+TM_FILE= tm-m32r.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/m32r/libsim.a
+GDBSERVER_DEPFILES= low-sim.o
+GDBSERVER_LIBS = ../../sim/m32r/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a ../../opcodes/libopcodes.a
diff --git a/gdb/config/m32r/tm-m32r.h b/gdb/config/m32r/tm-m32r.h
new file mode 100644
index 0000000..8273b4e
--- /dev/null
+++ b/gdb/config/m32r/tm-m32r.h
@@ -0,0 +1,234 @@
+/* Parameters for execution on a Mitsubishi m32r processor.
+   Copyright 1996, 1997 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Used by mswin.  */
+#define TARGET_M32R 1
+
+/* mvs_check TARGET_BYTE_ORDER BIG_ENDIAN */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* mvs_check REGISTER_NAMES */
+#define REGISTER_NAMES \
+{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+  "r8", "r9", "r10", "r11", "r12", "fp", "lr", "sp", \
+  "psw", "cbr", "spi", "spu", "bpc", "pc", "accl", "acch", \
+    /*  "cond", "sm", "bsm", "ie", "bie", "bcarry",  */ \
+}
+/* mvs_check  NUM_REGS */
+#define NUM_REGS 			24
+
+/* mvs_check  REGISTER_SIZE */
+#define REGISTER_SIZE 			4
+/* mvs_check  MAX_REGISTER_RAW_SIZE */
+#define MAX_REGISTER_RAW_SIZE		4
+
+/* mvs_check  *_REGNUM */
+#define R0_REGNUM	0
+#define STRUCT_RETURN_REGNUM 0
+#define ARG0_REGNUM	0
+#define ARGLAST_REGNUM	3
+#define V0_REGNUM	0
+#define V1_REGNUM	1
+#define FP_REGNUM	13
+#define RP_REGNUM	14
+#define SP_REGNUM	15
+#define PSW_REGNUM	16
+#define CBR_REGNUM	17
+#define SPI_REGNUM	18
+#define SPU_REGNUM	19
+#define BPC_REGNUM	20
+#define PC_REGNUM	21
+#define ACCL_REGNUM	22
+#define ACCH_REGNUM	23
+
+/* mvs_check  REGISTER_BYTES */
+#define REGISTER_BYTES			(NUM_REGS * 4)
+
+/* mvs_check  REGISTER_VIRTUAL_TYPE */
+#define REGISTER_VIRTUAL_TYPE(REG)	builtin_type_int
+
+/* mvs_check  REGISTER_BYTE */
+#define REGISTER_BYTE(REG) 		((REG) * 4)
+/* mvs_check  REGISTER_VIRTUAL_SIZE */
+#define REGISTER_VIRTUAL_SIZE(REG) 	4
+/* mvs_check  REGISTER_RAW_SIZE */
+#define REGISTER_RAW_SIZE(REG)     	4
+
+/* mvs_check  MAX_REGISTER_VIRTUAL_SIZE */
+#define MAX_REGISTER_VIRTUAL_SIZE 	4
+
+/* mvs_check  BREAKPOINT */
+#define BREAKPOINT {0x10, 0xf1}
+
+/* mvs_no_check  FUNCTION_START_OFFSET */
+#define FUNCTION_START_OFFSET 0
+
+/* mvs_check  DECR_PC_AFTER_BREAK */
+#define DECR_PC_AFTER_BREAK 0
+
+/* mvs_check  INNER_THAN */
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* mvs_check  SAVED_PC_AFTER_CALL */
+#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct type;
+struct value;
+#endif
+
+/* Define other aspects of the stack frame. 
+   We keep the offsets of all saved registers, 'cause we need 'em a lot!
+   We also keep the current size of the stack frame, and whether 
+   the frame pointer is valid (for frameless functions, and when we're
+   still in the prologue of a function with a frame) */
+
+/* mvs_check  EXTRA_FRAME_INFO */
+#define EXTRA_FRAME_INFO  	\
+  struct frame_saved_regs fsr;	\
+  int framesize;		\
+  int using_frame_pointer;
+
+
+extern void m32r_init_extra_frame_info PARAMS ((struct frame_info *fi));
+/* mvs_check  INIT_EXTRA_FRAME_INFO */
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) m32r_init_extra_frame_info (fi)
+/* mvs_no_check  INIT_FRAME_PC */
+#define INIT_FRAME_PC		/* Not necessary */
+
+extern void 
+m32r_frame_find_saved_regs PARAMS ((struct frame_info *fi, 
+				    struct frame_saved_regs *regaddr));
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+/* mvs_check  FRAME_FIND_SAVED_REGS */
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   m32r_frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+extern CORE_ADDR m32r_frame_chain PARAMS ((struct frame_info *fi));
+/* mvs_check  FRAME_CHAIN */
+#define FRAME_CHAIN(fi) 		m32r_frame_chain (fi)
+
+#define FRAME_CHAIN_VALID(fp, frame)	generic_frame_chain_valid (fp, frame)
+
+extern CORE_ADDR m32r_find_callers_reg PARAMS ((struct frame_info *fi, 
+						int regnum));
+extern CORE_ADDR m32r_frame_saved_pc PARAMS((struct frame_info *));
+/* mvs_check  FRAME_SAVED_PC */
+#define FRAME_SAVED_PC(fi)		m32r_frame_saved_pc (fi)
+
+/* mvs_check  EXTRACT_RETURN_VALUE */
+#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \
+  memcpy ((VALBUF), \
+	  (char *)(REGBUF) + REGISTER_BYTE (V0_REGNUM) + \
+	  ((TYPE_LENGTH (TYPE) > 4 ? 8 : 4) - TYPE_LENGTH (TYPE)), \
+	  TYPE_LENGTH (TYPE))
+
+/* mvs_check  STORE_RETURN_VALUE */
+#define STORE_RETURN_VALUE(TYPE, VALBUF) \
+  write_register_bytes(REGISTER_BYTE (V0_REGNUM) + \
+		       ((TYPE_LENGTH (TYPE) > 4 ? 8:4) - TYPE_LENGTH (TYPE)),\
+		       (VALBUF), TYPE_LENGTH (TYPE));
+
+extern CORE_ADDR m32r_skip_prologue PARAMS ((CORE_ADDR pc));
+/* mvs_check  SKIP_PROLOGUE */
+#define SKIP_PROLOGUE(pc) pc = m32r_skip_prologue (pc)
+
+/* mvs_no_check  FRAME_ARGS_SKIP */
+#define FRAME_ARGS_SKIP 0
+
+/* mvs_no_check  FRAME_ARGS_ADDRESS */
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+/* mvs_no_check  FRAME_LOCALS_ADDRESS */
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+/* mvs_no_check  FRAME_NUM_ARGS */
+#define FRAME_NUM_ARGS(val, fi) ((val) = -1)
+
+#define COERCE_FLOAT_TO_DOUBLE 1
+
+#define TARGET_WRITE_SP m32r_write_sp
+
+
+
+
+
+
+/* struct passing and returning stuff */
+#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP)	\
+	write_register (0, STRUCT_ADDR)
+
+extern use_struct_convention_fn m32r_use_struct_convention;
+#define USE_STRUCT_CONVENTION(GCC_P, TYPE) m32r_use_struct_convention (GCC_P, TYPE)
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \
+		   REGISTER_RAW_SIZE (V0_REGNUM))
+
+#define REG_STRUCT_HAS_ADDR(gcc_p,type)     (TYPE_LENGTH (type) > 8)
+
+
+/* generic dummy frame stuff */
+
+#define PUSH_DUMMY_FRAME             generic_push_dummy_frame ()
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+
+
+/* target-specific dummy_frame stuff */
+
+extern struct frame_info *m32r_pop_frame PARAMS ((struct frame_info *frame));
+/* mvs_check  POP_FRAME */
+#define POP_FRAME m32r_pop_frame (get_current_frame ())
+
+/* mvs_no_check  STACK_ALIGN */
+/* #define STACK_ALIGN(x) ((x + 3) & ~3) */
+
+extern CORE_ADDR m32r_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+extern CORE_ADDR m32r_push_arguments PARAMS ((int nargs, 
+					      struct value **args, 
+					      CORE_ADDR sp,
+					      unsigned char struct_return,
+					      CORE_ADDR struct_addr));
+
+
+
+/* mvs_no_check  PUSH_ARGUMENTS */
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = m32r_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+#define PUSH_RETURN_ADDRESS(PC, SP)      m32r_push_return_address (PC, SP)
+
+/* override the standard get_saved_register function with 
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_LENGTH            (0)
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define FIX_CALL_DUMMY(DUMMY1, STARTADDR, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
diff --git a/gdb/config/m68k/3b1.mh b/gdb/config/m68k/3b1.mh
new file mode 100644
index 0000000..2516cce
--- /dev/null
+++ b/gdb/config/m68k/3b1.mh
@@ -0,0 +1,12 @@
+# Host: AT&T 3b1/Unix pc
+# I don't think cc has been tried.  -traditional for <sys/ioctl.h>
+# (not sure whether necessary).
+CC= gcc -traditional
+# GCC runs out of virtual memory.
+# A separate CC for pinsn routines is no longer supported, though.
+# FIXME -- someone unlucky enough to have a 3B1, let bug-gcc@prep.ai.mit.edu
+# know what works and what fails on the 3B1.
+#PINSN_CC= cc
+
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+XM_FILE= xm-3b1.h
diff --git a/gdb/config/m68k/3b1.mt b/gdb/config/m68k/3b1.mt
new file mode 100644
index 0000000..4c5d9d4
--- /dev/null
+++ b/gdb/config/m68k/3b1.mt
@@ -0,0 +1,3 @@
+# Target: AT&T 3b1/Unix pc
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-3b1.h
diff --git a/gdb/config/m68k/altos.mh b/gdb/config/m68k/altos.mh
new file mode 100644
index 0000000..1073751
--- /dev/null
+++ b/gdb/config/m68k/altos.mh
@@ -0,0 +1,5 @@
+# Host: Altos 3068 (m68k, System V release 2)
+
+XM_FILE= xm-altos.h
+XDEPFILES= infptrace.o inftarg.o fork-child.o altos-xdep.o
+
diff --git a/gdb/config/m68k/altos.mt b/gdb/config/m68k/altos.mt
new file mode 100644
index 0000000..521e958
--- /dev/null
+++ b/gdb/config/m68k/altos.mt
@@ -0,0 +1,3 @@
+# Target: Altos 3068 (m68k, System V release 2)
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-altos.h
diff --git a/gdb/config/m68k/apollo68b.mh b/gdb/config/m68k/apollo68b.mh
new file mode 100644
index 0000000..6f55497
--- /dev/null
+++ b/gdb/config/m68k/apollo68b.mh
@@ -0,0 +1,6 @@
+# Host: Apollo m68k, BSD mode.
+
+XM_FILE= xm-apollo68b.h
+XDEPFILES= 
+NAT_FILE= nm-apollo68b.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o a68v-nat.o
diff --git a/gdb/config/m68k/apollo68b.mt b/gdb/config/m68k/apollo68b.mt
new file mode 100644
index 0000000..2383d3b
--- /dev/null
+++ b/gdb/config/m68k/apollo68b.mt
@@ -0,0 +1,3 @@
+# Target: Apollo m68k in BSD mode
+TDEPFILES= m68k-tdep.o dstread.o
+TM_FILE= tm-apollo68b.h
diff --git a/gdb/config/m68k/apollo68v.mh b/gdb/config/m68k/apollo68v.mh
new file mode 100644
index 0000000..9204f11
--- /dev/null
+++ b/gdb/config/m68k/apollo68v.mh
@@ -0,0 +1,11 @@
+# Host: Apollo, System V mode (?)
+
+XM_FILE= xm-apollo68v.h
+XM_CLIBS= -lPW
+XDEPFILES= 
+
+NAT_FILE= nm-apollo68v.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o a68v-nat.o
+
+RANLIB=echo >/dev/null
+CC= cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_SYS_FILE
diff --git a/gdb/config/m68k/cisco.mt b/gdb/config/m68k/cisco.mt
new file mode 100644
index 0000000..bc2e921
--- /dev/null
+++ b/gdb/config/m68k/cisco.mt
@@ -0,0 +1,3 @@
+# Target: Cisco Router with 68K processor
+TDEPFILES= m68k-tdep.o corelow.o core-aout.o
+TM_FILE= tm-cisco.h
diff --git a/gdb/config/m68k/delta68.mh b/gdb/config/m68k/delta68.mh
new file mode 100644
index 0000000..5492af0
--- /dev/null
+++ b/gdb/config/m68k/delta68.mh
@@ -0,0 +1,5 @@
+# Host: Motorola Delta Series sysV68 R3V7.1
+
+XM_FILE= xm-delta68.h
+NAT_FILE= nm-delta68.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o delta68-nat.o
diff --git a/gdb/config/m68k/delta68.mt b/gdb/config/m68k/delta68.mt
new file mode 100644
index 0000000..2761329
--- /dev/null
+++ b/gdb/config/m68k/delta68.mt
@@ -0,0 +1,3 @@
+# Motorola Delta Series sysV68 R3V7.1
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-delta68.h
diff --git a/gdb/config/m68k/dpx2.mh b/gdb/config/m68k/dpx2.mh
new file mode 100644
index 0000000..4f22ed53
--- /dev/null
+++ b/gdb/config/m68k/dpx2.mh
@@ -0,0 +1,7 @@
+# Host: Bull DPX2 (68k, System V release 3)
+
+XM_FILE= xm-dpx2.h
+XDEPFILES=
+
+NAT_FILE= nm-dpx2.h
+NATDEPFILES= infptrace.o corelow.o core-aout.o inftarg.o dpx2-nat.o fork-child.o
diff --git a/gdb/config/m68k/dpx2.mt b/gdb/config/m68k/dpx2.mt
new file mode 100644
index 0000000..5bbbbe6
--- /dev/null
+++ b/gdb/config/m68k/dpx2.mt
@@ -0,0 +1,3 @@
+# Target: Bull DPX2 (68k, System V release 3)
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-dpx2.h
diff --git a/gdb/config/m68k/es1800.mt b/gdb/config/m68k/es1800.mt
new file mode 100644
index 0000000..d809c61
--- /dev/null
+++ b/gdb/config/m68k/es1800.mt
@@ -0,0 +1,9 @@
+# Target:  Ericsson ES-1800 emulator (remote) for m68k.
+
+# remote-es.o should perhaps be part of the standard monitor.mt
+# configuration, if it is desirable to reduce the number of different
+# configurations.  However, before that happens remote-es.c has to be
+# fixed to compile on a DOS host.
+
+TDEPFILES= m68k-tdep.o remote-es.o 
+TM_FILE= tm-es1800.h
diff --git a/gdb/config/m68k/hp300bsd.mh b/gdb/config/m68k/hp300bsd.mh
new file mode 100644
index 0000000..3ca0362
--- /dev/null
+++ b/gdb/config/m68k/hp300bsd.mh
@@ -0,0 +1,7 @@
+# Host: Hewlett-Packard 9000 series 300, running BSD
+
+XM_FILE= xm-hp300bsd.h
+XDEPFILES= 
+
+NAT_FILE= nm-hp300bsd.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
diff --git a/gdb/config/m68k/hp300bsd.mt b/gdb/config/m68k/hp300bsd.mt
new file mode 100644
index 0000000..cbcc5ed
--- /dev/null
+++ b/gdb/config/m68k/hp300bsd.mt
@@ -0,0 +1,3 @@
+# Target: Hewlett-Packard 9000 series 300, running BSD
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-hp300bsd.h
diff --git a/gdb/config/m68k/hp300hpux.mh b/gdb/config/m68k/hp300hpux.mh
new file mode 100644
index 0000000..8ceb187
--- /dev/null
+++ b/gdb/config/m68k/hp300hpux.mh
@@ -0,0 +1,8 @@
+# Host: Hewlett-Packard 9000 series 300, running HPUX
+# The following is true because gcc uses a different .o file format
+# than the native HPUX compiler
+
+XM_FILE= xm-hp300hpux.h
+
+NAT_FILE= nm-hp300hpux.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o hp300ux-nat.o corelow.o core-aout.o
diff --git a/gdb/config/m68k/hp300hpux.mt b/gdb/config/m68k/hp300hpux.mt
new file mode 100644
index 0000000..0fa801d
--- /dev/null
+++ b/gdb/config/m68k/hp300hpux.mt
@@ -0,0 +1,8 @@
+# Target: Hewlett-Packard 9000 series 300, running HPUX
+
+#msg Note that GDB can only read symbols from programs that were
+#msg compiled with GCC using GAS.
+#msg
+
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-hp300hpux.h
diff --git a/gdb/config/m68k/isi.mh b/gdb/config/m68k/isi.mh
new file mode 100644
index 0000000..c406b4c
--- /dev/null
+++ b/gdb/config/m68k/isi.mh
@@ -0,0 +1,5 @@
+# Host: ISI Optimum V (3.05) under 4.3bsd.
+# corelow.o commented out because core dumps are broken on this machine,
+# as of GDB 4.8, according to lam@tfs.com
+XDEPFILES= infptrace.o inftarg.o fork-child.o core-aout.o isi-xdep.o
+XM_FILE= xm-isi.h
diff --git a/gdb/config/m68k/isi.mt b/gdb/config/m68k/isi.mt
new file mode 100644
index 0000000..7c4cdee
--- /dev/null
+++ b/gdb/config/m68k/isi.mt
@@ -0,0 +1,3 @@
+# Target: ISI Optimum V (3.05) under 4.3bsd.
+TDEPFILES=
+TM_FILE= tm-isi.h
diff --git a/gdb/config/m68k/linux.mh b/gdb/config/m68k/linux.mh
new file mode 100644
index 0000000..c3850b1
--- /dev/null
+++ b/gdb/config/m68k/linux.mh
@@ -0,0 +1,9 @@
+# Host: Motorola m68k running Linux
+
+XM_FILE= xm-linux.h
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-linux.h
+NATDEPFILES= infptrace.o solib.o inftarg.o fork-child.o corelow.o core-aout.o core-regset.o m68klinux-nat.o
+
+GDBSERVER_DEPFILES= low-linux.o
diff --git a/gdb/config/m68k/linux.mt b/gdb/config/m68k/linux.mt
new file mode 100644
index 0000000..0c0a149
--- /dev/null
+++ b/gdb/config/m68k/linux.mt
@@ -0,0 +1,3 @@
+# Target: Motorola m68k with a.out and ELF
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-linux.h
diff --git a/gdb/config/m68k/m68klynx.mh b/gdb/config/m68k/m68klynx.mh
new file mode 100644
index 0000000..48fdf29
--- /dev/null
+++ b/gdb/config/m68k/m68klynx.mh
@@ -0,0 +1,11 @@
+# Host: Motorola 680x0 running LynxOS
+
+XM_FILE= xm-m68klynx.h
+XM_CLIBS= -lbsd
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-m68klynx.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
+
+GDBSERVER_LIBS= -lbsd
+GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/m68k/m68klynx.mt b/gdb/config/m68k/m68klynx.mt
new file mode 100644
index 0000000..4aeac96
--- /dev/null
+++ b/gdb/config/m68k/m68klynx.mt
@@ -0,0 +1,4 @@
+# Target: Motorola 680x0 running LynxOS
+TDEPFILES= coff-solib.o m68k-tdep.o
+# m68kly-tdep.o
+TM_FILE= tm-m68klynx.h
diff --git a/gdb/config/m68k/m68kv4.mh b/gdb/config/m68k/m68kv4.mh
new file mode 100644
index 0000000..f2db3d9
--- /dev/null
+++ b/gdb/config/m68k/m68kv4.mh
@@ -0,0 +1,7 @@
+# Host: Motorola 680x0 running SVR4 (Commodore Amiga amix or Atari TT ASV)
+
+XM_FILE= xm-m68kv4.h
+XDEPFILES=
+
+NAT_FILE= nm-sysv4.h
+NATDEPFILES= corelow.o core-regset.o solib.o procfs.o fork-child.o
diff --git a/gdb/config/m68k/m68kv4.mt b/gdb/config/m68k/m68kv4.mt
new file mode 100644
index 0000000..fcabb17
--- /dev/null
+++ b/gdb/config/m68k/m68kv4.mt
@@ -0,0 +1,3 @@
+# Target: Motorola 680x0 running SVR4 (Commodore Amiga amix or Atari TT ASV)
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-m68kv4.h
diff --git a/gdb/config/m68k/monitor.mt b/gdb/config/m68k/monitor.mt
new file mode 100644
index 0000000..46b1c55
--- /dev/null
+++ b/gdb/config/m68k/monitor.mt
@@ -0,0 +1,3 @@
+# Target: Motorola m68k embedded (EST emulator, rom68k and bug monitors)
+TDEPFILES= m68k-tdep.o monitor.o remote-est.o cpu32bug-rom.o rom68k-rom.o abug-rom.o dbug-rom.o dsrec.o
+TM_FILE= tm-monitor.h
diff --git a/gdb/config/m68k/nbsd.mh b/gdb/config/m68k/nbsd.mh
new file mode 100644
index 0000000..a9e3942
--- /dev/null
+++ b/gdb/config/m68k/nbsd.mh
@@ -0,0 +1,5 @@
+# Host: Motorola m68k running NetBSD
+XDEPFILES= ser-tcp.o
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o m68knbsd-nat.o
+XM_FILE= xm-nbsd.h
+NAT_FILE= nm-nbsd.h
diff --git a/gdb/config/m68k/nbsd.mt b/gdb/config/m68k/nbsd.mt
new file mode 100644
index 0000000..1ad2882
--- /dev/null
+++ b/gdb/config/m68k/nbsd.mt
@@ -0,0 +1,3 @@
+# Target: Motorola m68k running NetBSD
+TDEPFILES= m68k-tdep.o solib.o
+TM_FILE= tm-nbsd.h
diff --git a/gdb/config/m68k/news.mh b/gdb/config/m68k/news.mh
new file mode 100644
index 0000000..e94af18
--- /dev/null
+++ b/gdb/config/m68k/news.mh
@@ -0,0 +1,5 @@
+# Host: Sony news series 700/800/900 (68020) running NewsOS version 3.
+XDEPFILES= news-xdep.o
+XM_FILE= xm-news.h
+NAT_FILE= nm-news.h
+NATDEPFILES= inftarg.o fork-child.o corelow.o core-aout.o infptrace.o 
diff --git a/gdb/config/m68k/news.mt b/gdb/config/m68k/news.mt
new file mode 100644
index 0000000..42f2417
--- /dev/null
+++ b/gdb/config/m68k/news.mt
@@ -0,0 +1,3 @@
+# Target: Sony news series 700/800/900 (68020) running NewsOS version 3.
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-news.h
diff --git a/gdb/config/m68k/news1000.mh b/gdb/config/m68k/news1000.mh
new file mode 100644
index 0000000..b1bf0a5
--- /dev/null
+++ b/gdb/config/m68k/news1000.mh
@@ -0,0 +1,3 @@
+# Host: Sony news series 1000 (68030) running NewsOS version 3.
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o news-xdep.o
+XM_FILE= xm-news1000.h
diff --git a/gdb/config/m68k/nm-apollo68b.h b/gdb/config/m68k/nm-apollo68b.h
new file mode 100644
index 0000000..4048a8b
--- /dev/null
+++ b/gdb/config/m68k/nm-apollo68b.h
@@ -0,0 +1,41 @@
+/* Macro defintions for an Apollo m68k in BSD mode
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	FETCH_INFERIOR_REGISTERS
+
+/* Tell gdb that we can attach and detach other processes */
+#define ATTACH_DETACH
+
+#define U_REGS_OFFSET 6
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR 0
+
+#undef FLOAT_INFO	/* No float info yet */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = (6 + 4 * (regno))
+
+/* Apollos don't really have a USER area,so trying to read it from the
+ * process address space will fail. It does support a read from a faked
+ * USER area using the "PEEKUSER" ptrace call.
+ */
+#define PT_READ_U 3
diff --git a/gdb/config/m68k/nm-apollo68v.h b/gdb/config/m68k/nm-apollo68v.h
new file mode 100644
index 0000000..3a56f4a
--- /dev/null
+++ b/gdb/config/m68k/nm-apollo68v.h
@@ -0,0 +1,20 @@
+/* Macro defintions for an Apollo.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	FETCH_INFERIOR_REGISTERS
diff --git a/gdb/config/m68k/nm-delta68.h b/gdb/config/m68k/nm-delta68.h
new file mode 100644
index 0000000..cb7ffbf
--- /dev/null
+++ b/gdb/config/m68k/nm-delta68.h
@@ -0,0 +1,21 @@
+/* Macro definitions for a Motorola Delta Series sysV68 R3V7.1.
+   Copyright (C) 1993, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#define KERNEL_U_SIZE kernel_u_size()
diff --git a/gdb/config/m68k/nm-dpx2.h b/gdb/config/m68k/nm-dpx2.h
new file mode 100644
index 0000000..50da268
--- /dev/null
+++ b/gdb/config/m68k/nm-dpx2.h
@@ -0,0 +1,29 @@
+/* Native support for a Bull DPX2.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* KERNEL_U_ADDR is determined upon startup in dpx2-xdep.c. */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = dpx2_register_u_addr ((blockend),(regno));
+
+extern int
+dpx2_register_u_addr PARAMS ((int, int));
+
+/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
+#define	ONE_PROCESS_WRITETEXT
diff --git a/gdb/config/m68k/nm-hp300bsd.h b/gdb/config/m68k/nm-hp300bsd.h
new file mode 100644
index 0000000..7aacbb1
--- /dev/null
+++ b/gdb/config/m68k/nm-hp300bsd.h
@@ -0,0 +1,88 @@
+/* Parameters for Hewlett-Packard 9000/300 native support under bsd.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Detect whether this is 4.3 or 4.4.  */
+
+#include <errno.h>
+#include <sys/param.h>
+#ifdef	BSD4_4
+
+/* BSD 4.4 alpha or better */
+
+/* We can attach to processes using ptrace.  */
+
+#define	ATTACH_DETACH
+#define	PTRACE_ATTACH	10
+#define	PTRACE_DETACH	11
+
+/* The third argument of ptrace is declared as this type.  */
+
+#define	PTRACE_ARG3_TYPE	caddr_t
+
+/* U_REGS_OFFSET is the offset of the registers within the u area for
+   ptrace purposes.  */
+#define U_REGS_OFFSET \
+  ptrace (PT_READ_U, inferior_pid, \
+	  (PTRACE_ARG3_TYPE) \
+	   (offsetof (struct user, u_kproc.kp_proc.p_md.md_regs)), 0) \
+    - USRSTACK
+
+/* No user structure in 4.4, registers are relative to kernel stack
+   which is fixed.  */
+#define KERNEL_U_ADDR	0xFFF00000
+
+/* FIXME: Is ONE_PROCESS_WRITETEXT still true now that the kernel has
+   copy-on-write?  It not, move it to the 4.3-specific section below
+   (now it is in xm-hp300bsd.h).  */
+
+#else
+
+/* This is BSD 4.3 or something like it.  */
+
+/* Get kernel u area address at run-time using BSD style nlist ().  */
+#define KERNEL_U_ADDR_BSD
+
+#endif
+
+/* This was once broken for 4.4, but probably because we had the wrong
+   KERNEL_U_ADDR.  */
+
+/* This is a piece of magic that is given a register number REGNO
+   and as BLOCKEND the address in the system of the end of the user structure
+   and stores in ADDR the address in the kernel or core dump
+   of that register.  */
+
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{									\
+  if (regno < PS_REGNUM)						\
+    addr = (int) &((struct frame *)(blockend))->f_regs[regno];		\
+  else if (regno == PS_REGNUM)						\
+    addr = (int) &((struct frame *)(blockend))->f_stackadj;		\
+  else if (regno == PC_REGNUM)						\
+    addr = (int) &((struct frame *)(blockend))->f_pc;			\
+  else if (regno < FPC_REGNUM)						\
+    addr = (int)							\
+      &((struct user *)0)->u_pcb.pcb_fpregs.fpf_regs[((regno)-FP0_REGNUM)*3];\
+  else if (regno == FPC_REGNUM)						\
+    addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpcr;	\
+  else if (regno == FPS_REGNUM)						\
+    addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpsr;	\
+  else									\
+    addr = (int) &((struct user *)0)->u_pcb.pcb_fpregs.fpf_fpiar;	\
+}
diff --git a/gdb/config/m68k/nm-hp300hpux.h b/gdb/config/m68k/nm-hp300hpux.h
new file mode 100644
index 0000000..83e7b2b
--- /dev/null
+++ b/gdb/config/m68k/nm-hp300hpux.h
@@ -0,0 +1,53 @@
+/* Parameters for native support on HP 9000 model 320, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+/* fetch_inferior_registers is in nat-hp300hpux.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* Get registers from a core file.  The floating point stuff is just
+   guesses.  */
+#define NEED_SYS_CORE_H
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{									\
+  if (regno < PS_REGNUM)						\
+    addr = (int) (&((struct proc_regs *)(blockend))->d0 + regno);	\
+  else if (regno == PS_REGNUM)						\
+    addr = (int) ((char *) (&((struct proc_regs *)(blockend))->ps) - 2); \
+  else if (regno == PC_REGNUM)						\
+    addr = (int) &((struct proc_regs *)(blockend))->pc;			\
+  else if (regno < FPC_REGNUM)						\
+    addr = (int) (((struct proc_regs *)(blockend))->mc68881		\
+		  + ((regno) - FP0_REGNUM) / 2);			\
+  else									\
+    addr = (int) (((struct proc_regs *)(blockend))->p_float		\
+		  + (regno) - FPC_REGNUM);				\
+}
+
+/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
+   with five arguments, so programs written for normal ptrace lose.
+
+   Idiots.
+
+   (They should have just made it varadic).  */
+
+#define FIVE_ARG_PTRACE
diff --git a/gdb/config/m68k/nm-linux.h b/gdb/config/m68k/nm-linux.h
new file mode 100644
index 0000000..d7a44ec
--- /dev/null
+++ b/gdb/config/m68k/nm-linux.h
@@ -0,0 +1,47 @@
+/* Native support for linux, for GDB, the GNU debugger.
+   Copyright (C) 1996,1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_LINUX_H
+#define NM_LINUX_H
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
+
+/* Tell gdb that we can attach and detach other processes */
+#define ATTACH_DETACH
+
+#define U_REGS_OFFSET 0
+
+/* We define this if link.h is available, because with ELF we use SVR4 style
+   shared libraries. */
+
+#ifdef HAVE_LINK_H
+#define SVR4_SHARED_LIBS
+#include "solib.h"		/* Support for shared libraries. */
+#endif
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = m68k_linux_register_u_addr ((blockend),(regno));
+
+extern int
+m68k_linux_register_u_addr PARAMS ((int, int));
+
+#endif /* #ifndef NM_LINUX_H */
diff --git a/gdb/config/m68k/nm-m68klynx.h b/gdb/config/m68k/nm-m68klynx.h
new file mode 100644
index 0000000..62b8d24
--- /dev/null
+++ b/gdb/config/m68k/nm-m68klynx.h
@@ -0,0 +1,25 @@
+/* Native-dependent definitions for Motorola 680x0 running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_M68KLYNX_H
+#define NM_M68KLYNX_H
+
+#include "nm-lynx.h"
+
+#endif /* NM_M68KLYNX_H */
diff --git a/gdb/config/m68k/nm-nbsd.h b/gdb/config/m68k/nm-nbsd.h
new file mode 100644
index 0000000..ce22c4d
--- /dev/null
+++ b/gdb/config/m68k/nm-nbsd.h
@@ -0,0 +1,21 @@
+/* Native-dependent definitions for Motorola m68k running NetBSD, for GDB.
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic NetBSD native definitions. */
+#include "nm-nbsd.h"
diff --git a/gdb/config/m68k/nm-news.h b/gdb/config/m68k/nm-news.h
new file mode 100644
index 0000000..643d217
--- /dev/null
+++ b/gdb/config/m68k/nm-news.h
@@ -0,0 +1,26 @@
+/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger.
+   Copyright 1987, 1989, 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_HEWS_H
+#define NM_NEWS_H 1
+
+/* Supply missing typedef needed in inftarg.c */
+typedef int pid_t;
+
+#endif	/* NM_NEWS_H */
diff --git a/gdb/config/m68k/nm-sun2.h b/gdb/config/m68k/nm-sun2.h
new file mode 100644
index 0000000..9035250
--- /dev/null
+++ b/gdb/config/m68k/nm-sun2.h
@@ -0,0 +1,33 @@
+/* Parameters for execution on a Sun2, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* This is a piece of magic that is given a register number REGNO
+   and as BLOCKEND the address in the system of the end of the user structure
+   and stores in ADDR the address in the kernel or core dump
+   of that register.  */
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{ addr = blockend + regno * 4; }
diff --git a/gdb/config/m68k/nm-sun3.h b/gdb/config/m68k/nm-sun3.h
new file mode 100644
index 0000000..e4ef8f4
--- /dev/null
+++ b/gdb/config/m68k/nm-sun3.h
@@ -0,0 +1,31 @@
+/* Native-only definitions for Sun-3 for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1991, 1992, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* We have to grab the regs since we store all regs at once.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
diff --git a/gdb/config/m68k/nm-sysv4.h b/gdb/config/m68k/nm-sysv4.h
new file mode 100644
index 0000000..6773131
--- /dev/null
+++ b/gdb/config/m68k/nm-sysv4.h
@@ -0,0 +1,22 @@
+/* Native-dependent definitions for Motorola 680x0 running SVR4.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include the generic SVR4 definitions.  */
+
+#include "nm-sysv4.h"
diff --git a/gdb/config/m68k/os68k.mt b/gdb/config/m68k/os68k.mt
new file mode 100644
index 0000000..391dd89
--- /dev/null
+++ b/gdb/config/m68k/os68k.mt
@@ -0,0 +1,3 @@
+# Target: VxWorks running on a 68000
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-os68k.h
diff --git a/gdb/config/m68k/st2000.mt b/gdb/config/m68k/st2000.mt
new file mode 100644
index 0000000..06dfe5c
--- /dev/null
+++ b/gdb/config/m68k/st2000.mt
@@ -0,0 +1,3 @@
+# Target: Tandem ST-2000 phone switch
+TDEPFILES= m68k-tdep.o remote-st.o
+TM_FILE= tm-st2000.h
diff --git a/gdb/config/m68k/sun2os3.mh b/gdb/config/m68k/sun2os3.mh
new file mode 100644
index 0000000..a3ef627
--- /dev/null
+++ b/gdb/config/m68k/sun2os3.mh
@@ -0,0 +1,5 @@
+# Host: Sun 2, running SunOS 3
+XDEPFILES= 
+XM_FILE= xm-sun2.h
+NAT_FILE= nm-sun2.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o sun3-nat.o
diff --git a/gdb/config/m68k/sun2os3.mt b/gdb/config/m68k/sun2os3.mt
new file mode 100644
index 0000000..12b7c7f
--- /dev/null
+++ b/gdb/config/m68k/sun2os3.mt
@@ -0,0 +1,7 @@
+# Target: Sun 2, running SunOS 3
+# The system-supplied assembler re-orders the symbols so that gdb
+# can't find "gcc_compiled.".
+#msg If you compile your program with GCC, use the GNU assembler.
+#msg
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-sun2.h
diff --git a/gdb/config/m68k/sun2os4.mh b/gdb/config/m68k/sun2os4.mh
new file mode 100644
index 0000000..617642d
--- /dev/null
+++ b/gdb/config/m68k/sun2os4.mh
@@ -0,0 +1,5 @@
+# Host: Sun 2, running SunOS 4
+XDEPFILES= 
+XM_FILE= xm-sun2.h
+NAT_FILE= nm-sun2.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o sun3-nat.o
diff --git a/gdb/config/m68k/sun2os4.mt b/gdb/config/m68k/sun2os4.mt
new file mode 100644
index 0000000..d0c56fe
--- /dev/null
+++ b/gdb/config/m68k/sun2os4.mt
@@ -0,0 +1,3 @@
+# Target: Sun 2, running SunOS 4
+TDEPFILES= solib.o m68k-tdep.o
+TM_FILE= tm-sun2os4.h
diff --git a/gdb/config/m68k/sun3os3.mh b/gdb/config/m68k/sun3os3.mh
new file mode 100644
index 0000000..1b93793
--- /dev/null
+++ b/gdb/config/m68k/sun3os3.mh
@@ -0,0 +1,5 @@
+# Host: Sun 3, running SunOS 3
+XDEPFILES= 
+XM_FILE= xm-sun3.h
+NAT_FILE= nm-sun3.h
+NATDEPFILES= fork-child.o inftarg.o infptrace.o corelow.o sun3-nat.o
diff --git a/gdb/config/m68k/sun3os3.mt b/gdb/config/m68k/sun3os3.mt
new file mode 100644
index 0000000..8f9dac8
--- /dev/null
+++ b/gdb/config/m68k/sun3os3.mt
@@ -0,0 +1,8 @@
+# Target: Sun 3, running SunOS 3
+# The system-supplied assembler re-orders the symbols so that gdb
+# can't find "gcc_compiled.".
+#msg If you compile your program with GCC, use the GNU assembler.
+#msg
+
+TDEPFILES= m68k-tdep.o
+TM_FILE= tm-sun3.h
diff --git a/gdb/config/m68k/sun3os4.mh b/gdb/config/m68k/sun3os4.mh
new file mode 100644
index 0000000..5d1bf52
--- /dev/null
+++ b/gdb/config/m68k/sun3os4.mh
@@ -0,0 +1,6 @@
+# Host: Sun 3, running SunOS 4
+XDEPFILES= 
+XM_FILE= xm-sun3os4.h
+NAT_FILE= nm-sun3.h
+NATDEPFILES= fork-child.o inftarg.o infptrace.o corelow.o sun3-nat.o
+GDBSERVER_DEPFILES= low-sun3.o
diff --git a/gdb/config/m68k/sun3os4.mt b/gdb/config/m68k/sun3os4.mt
new file mode 100644
index 0000000..dbc265f
--- /dev/null
+++ b/gdb/config/m68k/sun3os4.mt
@@ -0,0 +1,3 @@
+# Target: Sun 3, running SunOS 4, as a target system
+TDEPFILES= solib.o m68k-tdep.o
+TM_FILE= tm-sun3os4.h
diff --git a/gdb/config/m68k/tm-3b1.h b/gdb/config/m68k/tm-3b1.h
new file mode 100644
index 0000000..f917760
--- /dev/null
+++ b/gdb/config/m68k/tm-3b1.h
@@ -0,0 +1,32 @@
+/* Parameters for targeting GDB to a 3b1.
+   Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The child target can't deal with floating registers.  */
+#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM)
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0x1
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR 0x300000
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-altos.h b/gdb/config/m68k/tm-altos.h
new file mode 100644
index 0000000..2d77fea
--- /dev/null
+++ b/gdb/config/m68k/tm-altos.h
@@ -0,0 +1,57 @@
+/* Target definitions for GDB on an Altos 3068 (m68k running SVR2)
+   Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The child target can't deal with floating registers.  */
+#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM)
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0xe
+
+/* Address of end of stack space.  */
+
+/*#define STACK_END_ADDR (0xffffff)*/
+#define STACK_END_ADDR (0x1000000)
+
+/* Amount PC must be decremented by after a breakpoint.
+   On the Altos, the kernel resets the pc to the trap instr */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* The only reason this is here is the tm-altos.h reference below.  It
+   was moved back here from tm-m68k.h.  FIXME? */
+
+#define SKIP_PROLOGUE(pc)   \
+{ register int op = read_memory_integer (pc, 2);	\
+  if (op == 0047126)					\
+    pc += 4;   /* Skip link #word */			\
+  else if (op == 0044016)				\
+    pc += 6;   /* Skip link #long */			\
+  /* Not sure why branches are here.  */		\
+  /* From tm-isi.h, tm-altos.h */			\
+  else if (op == 0060000)				\
+    pc += 4;   /* Skip bra #word */			\
+  else if (op == 00600377)				\
+    pc += 6;   /* skip bra #long */			\
+  else if ((op & 0177400) == 0060000)			\
+    pc += 2;   /* skip bra #char */			\
+}
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-apollo68b.h b/gdb/config/m68k/tm-apollo68b.h
new file mode 100644
index 0000000..ee10410
--- /dev/null
+++ b/gdb/config/m68k/tm-apollo68b.h
@@ -0,0 +1,59 @@
+/* Parameters for execution on Apollo 68k running BSD.
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Apollos use vector 0xb for the breakpoint vector */
+
+#define BPT_VECTOR 0xb
+
+#include "m68k/tm-m68k.h"
+
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
+
+/* These are the jmp_buf registers I could guess. There are 13 registers
+ * in the buffer. There are 8 data registers, 6 general address registers,
+ * the Frame Pointer, the Stack Pointer, the PC and the SR in the chip. I would
+ * guess that 12 is the SR, but we don't need that anyway. 0 and 1 have
+ * me stumped. 4 appears to be a5 for some unknown reason. If you care
+ * about this, disassemble setjmp to find out. But don't do it with gdb :)
+ */
+
+#undef JB_SP
+#undef JB_FP
+#undef JB_PC
+#undef JB_D0
+#undef JB_D1
+#undef JB_D2
+#undef JB_D3
+#undef JB_D4
+#undef JB_D5
+
+#define JB_SP 2
+#define JB_FP 3
+#define JB_PC 5
+#define JB_D0 6
+#define JB_D1 7
+#define JB_D2 8
+#define JB_D3 9
+#define JB_D4 10
+#define JB_D5 11
+
+/* How to decide if we're in a shared library function.  (Probably a wrong
+   definintion inherited from the VxWorks config file).  */
+#define	IN_SOLIB_CALL_TRAMPOLINE(pc, name) (name && strcmp(name, "<end_of_program>") == 0)
diff --git a/gdb/config/m68k/tm-cisco.h b/gdb/config/m68k/tm-cisco.h
new file mode 100644
index 0000000..c3628d0
--- /dev/null
+++ b/gdb/config/m68k/tm-cisco.h
@@ -0,0 +1,55 @@
+/* Parameters for CISCO m68k.
+   Copyright (C) 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define GDBINIT_FILENAME	".cisco-gdbinit"	/* Init file */
+
+#define DEFAULT_PROMPT		"(cisco-68k-gdb) "	/* Default prompt */
+
+#include "m68k/tm-m68k.h"
+
+/* Offsets (in target ints) into jmp_buf.  Defined in /csc/sys/sun/asm.S. */
+
+#define JB_ELEMENT_SIZE 4
+
+#define JB_PC 0
+#define JB_D2 1
+#define JB_D3 2
+#define JB_D4 3
+#define JB_D5 4
+#define JB_D6 5
+#define JB_D7 6
+#define JB_A2 7
+#define JB_A3 8
+#define JB_A4 9
+#define JB_A5 10
+#define JB_A6 11
+#define JB_SP 12
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* BFD handles finding the registers in the core file, so they are at
+   the start of the BFD .reg section.  */
+#define REGISTER_U_ADDR(addr,blockend,regno) (addr = REGISTER_BYTE (regno))
+#define KERNEL_U_ADDR 0
diff --git a/gdb/config/m68k/tm-delta68.h b/gdb/config/m68k/tm-delta68.h
new file mode 100644
index 0000000..5965bb5
--- /dev/null
+++ b/gdb/config/m68k/tm-delta68.h
@@ -0,0 +1,103 @@
+/* Target definitions for delta68.
+   Copyright 1993, 1994, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0x1
+
+#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled%"
+#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled%"
+
+/* Amount PC must be decremented by after a breakpoint.
+   On the Delta, the kernel decrements it for us.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Not sure what happens if we try to store this register, but
+   phdm@info.ucl.ac.be says we need this define.  */
+
+#define CANNOT_STORE_REGISTER(regno)	(regno == FPI_REGNUM)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+/* When it returns a float/double value, use fp0 in sysV68.  */
+/* When it returns a pointer value, use a0 in sysV68.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF)			\
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+    REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE,			\
+				 &REGBUF[REGISTER_BYTE (FP0_REGNUM)],	\
+				 VALBUF);				\
+  else									\
+    memcpy ((VALBUF),							\
+	    (char *) ((REGBUF) +					\
+		      (TYPE_CODE(TYPE) == TYPE_CODE_PTR ? 8 * 4 :	\
+		       (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)))), \
+	    TYPE_LENGTH(TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+/* When it returns a float/double value, use fp0 in sysV68.  */
+/* When it returns a pointer value, use a0 in sysV68.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+      {									\
+	char raw_buf[REGISTER_RAW_SIZE (FP0_REGNUM)];			\
+	REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buf);	\
+	write_register_bytes (REGISTER_BYTE (FP0_REGNUM),		\
+			      raw_buf, REGISTER_RAW_SIZE (FP0_REGNUM)); \
+      }									\
+  else									\
+    write_register_bytes ((TYPE_CODE(TYPE) == TYPE_CODE_PTR ? 8 * 4 : 0), \
+			  VALBUF, TYPE_LENGTH (TYPE))
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(val, fi)  \
+{ register CORE_ADDR pc = FRAME_SAVED_PC (fi);			\
+  register int insn = 0177777 & read_memory_integer (pc, 2);	\
+  val = 0;							\
+  if (insn == 0047757 || insn == 0157374)  /* lea W(sp),sp or addaw #W,sp */ \
+    val = read_memory_integer (pc + 2, 2);			\
+  else if ((insn & 0170777) == 0050217 /* addql #N, sp */	\
+	   || (insn & 0170777) == 0050117)  /* addqw */		\
+    { val = (insn >> 9) & 7; if (val == 0) val = 8; }		\
+  else if (insn == 0157774) /* addal #WW, sp */			\
+    val = read_memory_integer (pc + 2, 4);			\
+  val >>= 2; }
+
+/* On M68040 versions of sysV68 R3V7.1, ptrace(PT_WRITE_I) does not clear
+   the processor's instruction cache as it should.  */
+#define CLEAR_INSN_CACHE()	clear_insn_cache()
+
+#include "m68k/tm-m68k.h"
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#undef EXTRACT_STRUCT_VALUE_ADDRESS
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF)\
+	(*(CORE_ADDR *)((char*)(REGBUF) + 8 * 4))
diff --git a/gdb/config/m68k/tm-dpx2.h b/gdb/config/m68k/tm-dpx2.h
new file mode 100644
index 0000000..8b1bfda
--- /dev/null
+++ b/gdb/config/m68k/tm-dpx2.h
@@ -0,0 +1,33 @@
+/* Parameters for targeting to a Bull DPX2.
+   Copyright (C) 1986, 1987, 1989, 1991, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0xe
+
+/* Need to get function ends by adding this to epilogue address from .bf
+   record, not using x_fsize field.  */
+#define FUNCTION_EPILOGUE_SIZE 4
+
+/* The child target can't deal with writing floating registers.  */
+#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM)
+
+#include <sys/types.h>
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-es1800.h b/gdb/config/m68k/tm-es1800.h
new file mode 100644
index 0000000..ce2af1d
--- /dev/null
+++ b/gdb/config/m68k/tm-es1800.h
@@ -0,0 +1,59 @@
+/* Parameters for execution on ES-1800 emulator for 68000.
+   The code was originally written by Johan Holmberg TT/SJ Ericsson Telecom
+   AB and later modified by Johan Henriksson TT/SJ. It was adapted to GDB 4.0
+   by Jan Norden TX/DK.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+GDB is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	GDBINIT_FILENAME	".esgdbinit"
+
+#define	DEFAULT_PROMPT		"(esgdb) "
+
+#include "m68k/tm-m68k.h"
+
+/* Longjmp stuff borrowed from sun3 configuration.  Don't know if correct. 
+   FIXME.  */
+/* Offsets (in target ints) into jmp_buf.  Not defined by Sun, but at least
+   documented in a comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_PSL 4
+#define JB_D2 5
+#define JB_D3 6
+#define JB_D4 7
+#define JB_D5 8
+#define JB_D6 9
+#define JB_D7 10
+#define JB_A2 11
+#define JB_A3 12
+#define JB_A4 13
+#define JB_A5 14
+#define JB_A6 15
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
diff --git a/gdb/config/m68k/tm-hp300bsd.h b/gdb/config/m68k/tm-hp300bsd.h
new file mode 100644
index 0000000..cdd75dc
--- /dev/null
+++ b/gdb/config/m68k/tm-hp300bsd.h
@@ -0,0 +1,62 @@
+/* Parameters for target machine Hewlett-Packard 9000/300, running bsd.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Configuration file for HP9000/300 series machine running BSD,
+   including Utah, Mt. Xinu or Berkeley variants.  This is NOT for HP-UX.
+   Problems to hpbsd-bugs@cs.utah.edu.  */
+
+/* GCC is the only compiler used on this OS.  So get this right even if
+   the code which detects gcc2_compiled. is still broken.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint.
+
+   For hp300bsd the normal breakpoint vector is 0x2 (for debugging via
+   ptrace); for remote kernel debugging the breakpoint vector is 0xf.  */
+
+#define BPT_VECTOR 0x2
+#define REMOTE_BPT_VECTOR 0xf
+
+#define TARGET_NBPG 4096
+
+/* For 4.4 this would be 2, but it is OK for us to detect an area a
+   bit bigger than necessary.  This way the same gdb binary can target
+   either 4.3 or 4.4.  */
+
+#define TARGET_UPAGES 3
+
+/* On the HP300, sigtramp is in the u area.  Gak!  User struct is not
+   mapped to the same virtual address in user/kernel address space
+   (hence STACK_END_ADDR as opposed to KERNEL_U_ADDR).  This tests
+   for the whole u area, since we don't necessarily have hp300bsd
+   include files around.  */
+
+/* For 4.4, it is actually right 20 bytes *before* STACK_END_ADDR, so
+   include that in the area we test for.  */
+
+#define SIGTRAMP_START(pc) (STACK_END_ADDR - 20)
+#define SIGTRAMP_END(pc) (STACK_END_ADDR + TARGET_UPAGES * TARGET_NBPG)
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR 0xfff00000
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-hp300hpux.h b/gdb/config/m68k/tm-hp300hpux.h
new file mode 100644
index 0000000..fce0d99
--- /dev/null
+++ b/gdb/config/m68k/tm-hp300hpux.h
@@ -0,0 +1,31 @@
+/* Parameters for execution on an HP 9000 model 320, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* GCC is the only compiler used for stabs on this OS.  So get this
+   right even if the code which detects gcc2_compiled. is still
+   broken.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0x1
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-isi.h b/gdb/config/m68k/tm-isi.h
new file mode 100644
index 0000000..f994524
--- /dev/null
+++ b/gdb/config/m68k/tm-isi.h
@@ -0,0 +1,150 @@
+/* Definitions to target GDB on an ISI Optimum V (3.05) under 4.3bsd.
+   Copyright (C) 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This has not been tested on ISI's running BSD 4.2, but it will probably
+   work.  */
+
+/* Data segment starts at etext rounded up to DATAROUND in {N,Z}MAGIC files */
+
+#define DATAROUND	0x20000
+#define N_DATADDR(hdr)	(hdr.a_magic != OMAGIC ? \
+	(hdr.a_text + DATAROUND) & ~(DATAROUND-1) : hdr.a_text)
+
+/* Text segment starts at sizeof (struct exec) in {N,Z}MAGIC files */
+
+#define N_TXTADDR(hdr)	(hdr.a_magic != OMAGIC ? sizeof (struct exec) : 0)
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.
+   On the ISI, the kernel resets the pc to the trap instr */
+
+#define DECR_PC_AFTER_BREAK 0
+
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(val, fi)  \
+{ register CORE_ADDR pc = FRAME_SAVED_PC (fi);			\
+  register int insn = 0177777 & read_memory_integer (pc, 2);	\
+  val = 0;							\
+  if (insn == 0047757 || insn == 0157374)  /* lea W(sp),sp or addaw #W,sp */ \
+    val = read_memory_integer (pc + 2, 2);			\
+  else if ((insn & 0170777) == 0050217 /* addql #N, sp */	\
+	   || (insn & 0170777) == 0050117)  /* addqw */		\
+    { val = (insn >> 9) & 7; if (val == 0) val = 8; }		\
+  else if (insn == 0157774) /* addal #WW, sp */			\
+    val = read_memory_integer (pc + 2, 4);			\
+  val >>= 2; }
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)		\
+{ register int regnum;							\
+  register int regmask;							\
+  register CORE_ADDR next_addr;						\
+  register CORE_ADDR pc;						\
+  register int insn;							\
+  register int offset;							\
+  memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);			\
+  if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 8*12 - 4 \
+      && (frame_info)->pc <= (frame_info)->frame)				\
+    { next_addr = (frame_info)->frame;					\
+      pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 8*12 - 4; }\
+  else   								\
+    { pc = get_pc_function_start ((frame_info)->pc); 			\
+      /* Verify we have a link a6 instruction next,			\
+	 or a branch followed by a link a6 instruction;			\
+	 if not we lose.  If we win, find the address above the saved   \
+	 regs using the amount of storage from the link instruction.  */\
+retry:									\
+      insn = read_memory_integer (pc, 2);				\
+      if (insn == 044016)						\
+	next_addr = (frame_info)->frame - read_memory_integer (pc += 2, 4), pc+=4; \
+      else if (insn == 047126)						\
+	next_addr = (frame_info)->frame - read_memory_integer (pc += 2, 2), pc+=2; \
+      else if ((insn & 0177400) == 060000)	/* bra insn */		\
+	{ offset = insn & 0377;						\
+          pc += 2;				/* advance past bra */	\
+	  if (offset == 0)			/* bra #word */		\
+	    offset = read_memory_integer (pc, 2), pc += 2;		\
+	  else if (offset == 0377)		/* bra #long */		\
+	    offset = read_memory_integer (pc, 4), pc += 4;		\
+	  pc += offset;							\
+	  goto retry;							\
+      } else goto lose;							\
+      /* If have an addal #-n, sp next, adjust next_addr.  */		\
+      if ((0177777 & read_memory_integer (pc, 2)) == 0157774)		\
+	next_addr += read_memory_integer (pc += 2, 4), pc += 4;		\
+    }									\
+  /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */	\
+  insn = read_memory_integer (pc, 2), pc += 2;				\
+  regmask = read_memory_integer (pc, 2);				\
+  if ((insn & 0177760) == 022700)	/* movl rn, (sp) */		\
+    (frame_saved_regs).regs[(insn&7) + ((insn&010)?8:0)] = next_addr;	\
+  else if ((insn & 0177760) == 024700)	/* movl rn, -(sp) */		\
+    (frame_saved_regs).regs[(insn&7) + ((insn&010)?8:0)] = next_addr-=4; \
+  else if (insn == 0044327)		/* moveml mask, (sp) */		\
+    { pc += 2;								\
+      /* Regmask's low bit is for register 0, the first written */	\
+      next_addr -= 4;							\
+      for (regnum = 0; regnum < 16; regnum++, regmask >>= 1)		\
+	if (regmask & 1)						\
+          (frame_saved_regs).regs[regnum] = (next_addr += 4);		\
+  } else if (insn == 0044347)		/* moveml mask, -(sp) */	\
+    { pc += 2;								\
+      /* Regmask's low bit is for register 15, the first pushed */	\
+      for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1)		\
+	if (regmask & 1)						\
+          (frame_saved_regs).regs[regnum] = (next_addr -= 4); }		\
+  /* clrw -(sp); movw ccr,-(sp) may follow.  */				\
+  if (read_memory_integer (pc, 2) == 041147 				\
+      && read_memory_integer (pc+2, 2) == 042347)			\
+    (frame_saved_regs).regs[PS_REGNUM] = (next_addr -= 4);		\
+  lose: ;								\
+  (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 8;		\
+  (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame;		\
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;		\
+}
+
+/* The only reason this is here is the tm-isi.h reference below.  It
+   was moved back here from tm-m68k.h.  FIXME? */
+
+#define SKIP_PROLOGUE(pc)   \
+{ register int op = read_memory_integer (pc, 2);	\
+  if (op == 0047126)					\
+    pc += 4;   /* Skip link #word */			\
+  else if (op == 0044016)				\
+    pc += 6;   /* Skip link #long */			\
+  /* Not sure why branches are here.  */		\
+  /* From tm-isi.h, tm-altos.h */			\
+  else if (op == 0060000)				\
+    pc += 4;   /* Skip bra #word */			\
+  else if (op == 00600377)				\
+    pc += 6;   /* skip bra #long */			\
+  else if ((op & 0177400) == 0060000)			\
+    pc += 2;   /* skip bra #char */			\
+}
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-linux.h b/gdb/config/m68k/tm-linux.h
new file mode 100644
index 0000000..6c11998
--- /dev/null
+++ b/gdb/config/m68k/tm-linux.h
@@ -0,0 +1,109 @@
+/* Definitions to target GDB to Linux on m680x0
+   Copyright (C) 1996,1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Number of traps that happen between exec'ing the shell to run an
+   inferior, and when we finally get to the inferior code.  This is 2
+   on most implementations.  */
+
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* The following definitions are appropriate when using the ELF
+   format, where floating point values are returned in fp0, pointer
+   values in a0 and other values in d0.  */
+
+/* Extract from an array REGBUF containing the (raw) register state a
+   function return value of type TYPE, and copy that, in virtual
+   format, into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+{									\
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+    {									\
+       REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE,			\
+				    ((char *) (REGBUF)			\
+				     + REGISTER_BYTE (FP0_REGNUM)),	\
+				    VALBUF);				\
+    }									\
+  else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)				\
+    memcpy (VALBUF, (char *) (REGBUF) + REGISTER_BYTE (A0_REGNUM),	\
+	    TYPE_LENGTH (TYPE));					\
+  else									\
+    memcpy (VALBUF,							\
+	    ((char *) (REGBUF)						\
+	     + (TYPE_LENGTH (TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH (TYPE))),	\
+	    TYPE_LENGTH (TYPE));					\
+}
+
+/* Write into appropriate registers a function return value of type
+   TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+{									\
+  if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+    {									\
+      char raw_buffer[REGISTER_RAW_SIZE (FP0_REGNUM)];			\
+      REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buffer);	\
+      write_register_bytes (REGISTER_BYTE (FP0_REGNUM),			\
+			    raw_buffer, TYPE_LENGTH (TYPE));		\
+    }									\
+  else									\
+    {									\
+      if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)				\
+	write_register_bytes (REGISTER_BYTE (A0_REGNUM), VALBUF,	\
+			      TYPE_LENGTH (TYPE));			\
+      write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE));		\
+    }									\
+}
+
+#include "tm-sysv4.h"
+#include "m68k/tm-m68k.h"
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#undef EXTRACT_STRUCT_VALUE_ADDRESS
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  (*(CORE_ADDR *)((char *) (REGBUF) + REGISTER_BYTE (A0_REGNUM)))
+
+/* Offsets (in target ints) into jmp_buf.  */
+
+#define JB_ELEMENT_SIZE 4
+#define JB_PC 7
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+/* Offset to saved PC in sigcontext, from <asm/sigcontext.h>.  */
+#define SIGCONTEXT_PC_OFFSET 26
+
+#undef FRAME_SAVED_PC
+#define FRAME_SAVED_PC(FRAME) \
+  (((FRAME)->signal_handler_caller \
+    ? sigtramp_saved_pc (FRAME) \
+    : read_memory_integer ((FRAME)->frame + 4, 4)))
+
+extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *));
+
+#define IN_SIGTRAMP(pc,name) in_sigtramp (pc)
+extern int in_sigtramp PARAMS ((CORE_ADDR pc));
diff --git a/gdb/config/m68k/tm-m68k.h b/gdb/config/m68k/tm-m68k.h
new file mode 100644
index 0000000..098500c
--- /dev/null
+++ b/gdb/config/m68k/tm-m68k.h
@@ -0,0 +1,393 @@
+/* Parameters for execution on a 68000 series machine.
+   Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Generic 68000 stuff, to be included by other tm-*.h files.  */
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#if !defined(SKIP_PROLOGUE)
+#define SKIP_PROLOGUE(ip)   {(ip) = m68k_skip_prologue(ip);}
+extern CORE_ADDR m68k_skip_prologue PARAMS ((CORE_ADDR ip));
+#endif
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+#endif
+
+extern CORE_ADDR m68k_saved_pc_after_call PARAMS ((struct frame_info *));
+extern void m68k_find_saved_regs PARAMS ((struct frame_info *, struct frame_saved_regs *));
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  m68k_saved_pc_after_call(frame)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Stack must be kept short aligned when doing function calls.  */
+
+#define STACK_ALIGN(ADDR) (((ADDR) + 1) & ~1)
+
+/* Sequence of bytes for breakpoint instruction.
+   This is a TRAP instruction.  The last 4 bits (0xf below) is the
+   vector.  Systems which don't use 0xf should define BPT_VECTOR
+   themselves before including this file.  */
+
+#if !defined (BPT_VECTOR)
+#define BPT_VECTOR 0xf
+#endif
+
+#if !defined (BREAKPOINT)
+#define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)}
+#endif
+
+/* We default to vector 1 for the "remote" target, but allow targets
+   to override.  */
+#if !defined (REMOTE_BPT_VECTOR)
+#define REMOTE_BPT_VECTOR 1
+#endif
+
+#if !defined (REMOTE_BREAKPOINT)
+#define REMOTE_BREAKPOINT {0x4e, (0x40 | REMOTE_BPT_VECTOR)}
+#endif
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+
+#if !defined (DECR_PC_AFTER_BREAK)
+#define DECR_PC_AFTER_BREAK 2
+#endif
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+#define REGISTER_BYTES_FP (16*4 + 8 + 8*12 + 3*4)
+#define REGISTER_BYTES_NOFP (16*4 + 8)
+
+#ifndef NUM_REGS
+#define NUM_REGS 29
+#endif
+
+#define NUM_FREGS (NUM_REGS-24)
+
+#ifndef REGISTER_BYTES_OK
+#define REGISTER_BYTES_OK(b) \
+   ((b) == REGISTER_BYTES_FP \
+    || (b) == REGISTER_BYTES_NOFP)
+#endif
+
+#ifndef REGISTER_BYTES
+#define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
+#endif
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  \
+ ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168	\
+  : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72	\
+  : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the 68000, all regs are 4 bytes
+   except the floating point regs which are 12 bytes.  */
+/* Note that the unsigned cast here forces the result of the
+   subtraction to very high positive values if N < FP0_REGNUM */
+
+#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the 68000, all regs are 4 bytes
+   except the floating point regs which are 8-byte doubles.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 12
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8)
+
+#include "floatformat.h"
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+do									\
+  {									\
+    DOUBLEST dbl_tmp_val;							\
+    floatformat_to_doublest (&floatformat_m68881_ext, (FROM), &dbl_tmp_val); \
+    store_floating ((TO), TYPE_LENGTH (TYPE), dbl_tmp_val);		\
+  } while (0)
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+do									\
+  {									\
+    DOUBLEST dbl_tmp_val;						\
+    dbl_tmp_val = extract_floating ((FROM), TYPE_LENGTH (TYPE));	\
+    floatformat_from_doublest (&floatformat_m68881_ext, &dbl_tmp_val, (TO)); \
+  } while (0)
+
+/* Return the GDB type object for the "standard" data type of data 
+   in register N.  This should be int for D0-D7, double for FP0-FP7,
+   and void pointer for all others (A0-A7, PC, SR, FPCONTROL etc).
+   Note, for registers which contain addresses return pointer to void, 
+   not pointer to char, because we don't want to attempt to print 
+   the string after printing the address.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((unsigned) (N) >= FPC_REGNUM ? lookup_pointer_type (builtin_type_void) : \
+   (unsigned) (N) >= FP0_REGNUM ? builtin_type_double :                     \
+   (unsigned) (N) >=  A0_REGNUM ? lookup_pointer_type (builtin_type_void) : \
+   builtin_type_int)
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES  \
+ {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \
+  "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \
+  "ps", "pc",  \
+  "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
+  "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define D0_REGNUM 0
+#define A0_REGNUM 8
+#define A1_REGNUM 9
+#define FP_REGNUM 14		/* Contains address of executing stack frame */
+#define SP_REGNUM 15		/* Contains address of top of stack */
+#define PS_REGNUM 16		/* Contains processor status */
+#define PC_REGNUM 17		/* Contains program counter */
+#define FP0_REGNUM 18		/* Floating point register 0 */
+#define FPC_REGNUM 26		/* 68881 control register */
+#define FPS_REGNUM 27		/* 68881 status register */
+#define FPI_REGNUM 28		/* 68881 iaddr register */
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (A1_REGNUM, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  This is assuming that floating point values are returned
+   as doubles in d0/d1.  */
+
+#if !defined (EXTRACT_RETURN_VALUE)
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy ((VALBUF),							\
+	  (char *)(REGBUF) +						\
+	         (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)),	\
+	  TYPE_LENGTH(TYPE))
+#endif
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  Assumes floats are passed
+   in d0/d1.  */
+
+#if !defined (STORE_RETURN_VALUE)
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+#endif
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
+   chain-pointer.
+   In the case of the 68000, the frame's nominal address
+   is the address of a 4-byte word containing the calling frame's address.  */
+
+/* If we are chaining from sigtramp, then manufacture a sigtramp frame
+   (which isn't really on the stack.  I'm not sure this is right for anything
+   but BSD4.3 on an hp300.  */
+#define FRAME_CHAIN(thisframe)  \
+  (thisframe->signal_handler_caller \
+   ? thisframe->frame \
+   : (!inside_entry_file ((thisframe)->pc) \
+      ? read_memory_integer ((thisframe)->frame, 4) \
+      : 0))
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  do { \
+    if ((FI)->signal_handler_caller) \
+      (FRAMELESS) = 0; \
+    else \
+      (FRAMELESS) = frameless_look_for_prologue(FI); \
+  } while (0)
+
+/* This was determined by experimentation on hp300 BSD 4.3.  Perhaps
+   it corresponds to some offset in /usr/include/sys/user.h or
+   something like that.  Using some system include file would
+   have the advantage of probably being more robust in the face
+   of OS upgrades, but the disadvantage of being wrong for
+   cross-debugging.  */
+
+#define SIG_PC_FP_OFFSET 530
+
+#define FRAME_SAVED_PC(FRAME) \
+  (((FRAME)->signal_handler_caller \
+    ? ((FRAME)->next \
+       ? read_memory_integer ((FRAME)->next->frame + SIG_PC_FP_OFFSET, 4) \
+       : read_memory_integer (read_register (SP_REGNUM) \
+			      + SIG_PC_FP_OFFSET - 8, 4) \
+       ) \
+    : read_memory_integer ((FRAME)->frame + 4, 4)) \
+   )
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+#if !defined (FRAME_NUM_ARGS)
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+#endif
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#if !defined (FRAME_FIND_SAVED_REGS)
+#define FRAME_FIND_SAVED_REGS(fi,fsr) m68k_find_saved_regs ((fi), &(fsr))
+#endif /* no FIND_FRAME_SAVED_REGS.  */
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
+   by gdb itself:
+
+   These instructions exist only so that m68k_find_saved_regs can parse
+   them as a "prologue"; they are never executed.
+
+	fmovemx fp0-fp7,sp@-			0xf227 0xe0ff
+	moveml d0-a5,sp@-			0x48e7 0xfffc
+	clrw sp@-				0x4267
+	movew ccr,sp@-				0x42e7
+
+   The arguments are pushed at this point by GDB; no code is needed in
+   the dummy for this.  The CALL_DUMMY_START_OFFSET gives the position
+   of the following jsr instruction.  That is where we start
+   executing.
+
+	jsr @#0x32323232			0x4eb9 0x3232 0x3232
+	addal #0x69696969,sp			0xdffc 0x6969 0x6969
+	trap #<your BPT_VECTOR number here>	0x4e4?
+	nop					0x4e71
+
+   Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
+
+   The dummy frame always saves the floating-point registers, whether they
+   actually exist on this target or not.  */
+
+/* FIXME: Wrong to hardwire this as BPT_VECTOR when sometimes it
+   should be REMOTE_BPT_VECTOR.  Best way to fix it would be to define
+   CALL_DUMMY_BREAKPOINT_OFFSET.  */
+
+#define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
+#define CALL_DUMMY_LENGTH 28		/* Size of CALL_DUMMY */
+#define CALL_DUMMY_START_OFFSET 12	/* Offset to jsr instruction*/
+#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 12)
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.
+   We use the BFD routines to store a big-endian value of known size.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)     \
+{ bfd_putb32 (fun,     (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 2);  \
+  bfd_putb32 (nargs*4, (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME	{ m68k_push_dummy_frame (); }
+
+extern void m68k_push_dummy_frame PARAMS ((void));
+
+extern void m68k_pop_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME		{ m68k_pop_frame (); }
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+#define TARGET_M68K
diff --git a/gdb/config/m68k/tm-m68klynx.h b/gdb/config/m68k/tm-m68klynx.h
new file mode 100644
index 0000000..fbe5707
--- /dev/null
+++ b/gdb/config/m68k/tm-m68klynx.h
@@ -0,0 +1,38 @@
+/* Macro definitions for Motorola 680x0 running under LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_M68KLYNX_H
+#define TM_M68KLYNX_H
+
+#include "tm-lynx.h"
+
+/* If PC-2 contains this instruction, then we know what we are in a system
+   call stub, and the return PC is is at SP+4, instead of SP. */
+
+#define SYSCALL_TRAP 0x4e4a	/* trap #10 */
+#define SYSCALL_TRAP_OFFSET 2	/* PC is after trap instruction */
+
+/* Use the generic 68k definitions. */
+
+#include "m68k/tm-m68k.h"
+
+/* Disable dumbshit alternate breakpoint mechanism needed by 68k stub. */
+#undef REMOTE_BREAKPOINT
+
+#endif /* TM_M68KLYNX_H */
diff --git a/gdb/config/m68k/tm-m68kv4.h b/gdb/config/m68k/tm-m68kv4.h
new file mode 100644
index 0000000..6730607
--- /dev/null
+++ b/gdb/config/m68k/tm-m68kv4.h
@@ -0,0 +1,70 @@
+/* Target definitions for GDB on a Motorola 680x0 running SVR4.
+   (Commodore Amiga with amix or Atari TT with ASV)
+   Copyright (C) 1991, 1995 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygint)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0x1
+
+/* How much to decrement the PC after a trap.  Depends on kernel. */
+
+#define DECR_PC_AFTER_BREAK 0		/* No decrement required */
+
+/* Use the alternate method of determining valid frame chains. */
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+#include "tm-sysv4.h"
+#include "m68k/tm-m68k.h"
+
+/* Offsets (in target ints) into jmp_buf.  Not defined in any system header
+   file, so we have to step through setjmp/longjmp with a debugger and figure
+   them out.  As a double check, note that <setjmp> defines _JBLEN as 13,
+   which matches the number of elements we see saved by setjmp(). */
+
+#define JB_ELEMENT_SIZE sizeof(int)	/* jmp_buf[_JBLEN] is array of ints */
+
+#define JB_D2	0
+#define JB_D3	1
+#define JB_D4	2
+#define JB_D5	3
+#define JB_D6	4
+#define JB_D7	5
+#define JB_A1	6
+#define JB_A2	7
+#define JB_A3	8
+#define JB_A4	9
+#define JB_A5	10
+#define JB_A6	11
+#define JB_A7	12
+
+#define JB_PC	JB_A1	/* Setjmp()'s return PC saved in A1 */
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* Convert a DWARF register number to a gdb REGNUM.  */
+#define DWARF_REG_TO_REGNUM(num) ((num) < 16 ? (num) : (num)+FP0_REGNUM-16)
diff --git a/gdb/config/m68k/tm-mac.h b/gdb/config/m68k/tm-mac.h
new file mode 100644
index 0000000..90b4fab
--- /dev/null
+++ b/gdb/config/m68k/tm-mac.h
@@ -0,0 +1,20 @@
+/* Target-dependent definitions for Mac running MacOS.
+   Copyright (C) 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-monitor.h b/gdb/config/m68k/tm-monitor.h
new file mode 100644
index 0000000..7a48d9c
--- /dev/null
+++ b/gdb/config/m68k/tm-monitor.h
@@ -0,0 +1,44 @@
+/* Target machine definitions for a generic m68k monitor/emulator.
+   Copyright (C) 1986, 1987, 1989, 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The definitions here are appropriate for several embedded m68k-based
+   targets, including IDP (rom68k), BCC (cpu32bug), and EST's emulator.  */
+
+/* GCC is probably the only compiler used on this configuration.  So
+   get this right even if the code which detects gcc2_compiled. is
+   still broken.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* The target system handles breakpoints.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* No float registers.  */
+
+/*#define NUM_REGS 18*/
+
+#include "m68k/tm-m68k.h"
+
+/* Need to do this for ELF targets, where we can't figure out the boundaries of
+   the entry file.  This method stops the backtrace when we reach main.  */
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+/* FIXME, should do GET_LONGJMP_TARGET for newlib.  */
diff --git a/gdb/config/m68k/tm-nbsd.h b/gdb/config/m68k/tm-nbsd.h
new file mode 100644
index 0000000..cc86cc8
--- /dev/null
+++ b/gdb/config/m68k/tm-nbsd.h
@@ -0,0 +1,41 @@
+/* Macro definitions for i386 running under NetBSD.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_NBSD_H
+#define TM_NBSD_H
+
+#include <sys/param.h>
+#include <machine/vmparam.h>
+
+/* Define BPT_VECTOR if it is different than the default.
+   This is the vector number used by traps to indicate a breakpoint. */
+
+#define BPT_VECTOR 0x2
+
+/* Address of end of stack space.  */
+#define STACK_END_ADDR USRSTACK
+
+/* For NetBSD, sigtramp is 32 bytes before STACK_END_ADDR.  */
+#define SIGTRAMP_START(pc) (STACK_END_ADDR - 32)
+#define SIGTRAMP_END(pc) (STACK_END_ADDR)
+
+#include "m68k/tm-m68k.h"
+#include "tm-nbsd.h"
+
+#endif /* TM_NBSD_H */
diff --git a/gdb/config/m68k/tm-news.h b/gdb/config/m68k/tm-news.h
new file mode 100644
index 0000000..9fca446
--- /dev/null
+++ b/gdb/config/m68k/tm-news.h
@@ -0,0 +1,75 @@
+/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger.
+   Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* See following cpu type determination macro to get the machine type.
+
+Here is an m-news.h file for gdb.  It supports the 68881 registers.
+                                           by hikichi@srava.sra.junet
+
+* Ptrace for handling floating register has a bug(before NEWS OS version 2.2),
+* After NEWS OS version 3.2, some of ptrace's bug is fixed.
+  But we cannot change the floating register(see adb(1) in OS 3.2) yet.  */
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+/* when it return the floating value, use the FP0 in NEWS.  */
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  { if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \
+      { \
+	REGISTER_CONVERT_TO_VIRTUAL (FP0_REGNUM, TYPE, \
+			             &REGBUF[REGISTER_BYTE (FP0_REGNUM)], \
+				     VALBUF); \
+      } \
+    else \
+      memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)); }
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+/* when it return the floating value, use the FP0 in NEWS.  */
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  { if (TYPE_CODE (TYPE) == TYPE_CODE_FLT) \
+      { \
+	char raw_buf[REGISTER_RAW_SIZE (FP0_REGNUM)]; \
+	REGISTER_CONVERT_TO_RAW (TYPE, FP0_REGNUM, VALBUF, raw_buf); \
+	write_register_bytes (REGISTER_BYTE (FP0_REGNUM), \
+			      raw_buf, REGISTER_RAW_SIZE (FP0_REGNUM)); \
+      } \
+    else \
+      write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE)); }
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(val, fi)  \
+{ register CORE_ADDR pc = FRAME_SAVED_PC (fi);			\
+  register int insn = 0177777 & read_memory_integer (pc, 2);	\
+  val = 0;							\
+  if (insn == 0047757 || insn == 0157374)  /* lea W(sp),sp or addaw #W,sp */ \
+    val = read_memory_integer (pc + 2, 2);			\
+  else if ((insn & 0170777) == 0050217 /* addql #N, sp */	\
+	   || (insn & 0170777) == 0050117)  /* addqw */		\
+    { val = (insn >> 9) & 7; if (val == 0) val = 8; }		\
+  else if (insn == 0157774) /* addal #WW, sp */			\
+    val = read_memory_integer (pc + 2, 4);			\
+  val >>= 2; }
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-os68k.h b/gdb/config/m68k/tm-os68k.h
new file mode 100644
index 0000000..a69573f
--- /dev/null
+++ b/gdb/config/m68k/tm-os68k.h
@@ -0,0 +1,46 @@
+/* Parameters for execution on VxWorks m68k's, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	GDBINIT_FILENAME	".os68gdbinit"
+
+#define	DEFAULT_PROMPT		"(os68k) "
+
+#include "m68k/tm-m68k.h"
+
+/* We have more complex, useful breakpoints on the target.  */
+#undef DECR_PC_AFTER_BREAK
+#define	DECR_PC_AFTER_BREAK	0
+
+/* Takes the current frame-struct pointer and returns the chain-pointer
+   to get to the calling frame.
+
+   If our current frame pointer is zero, we're at the top; else read out
+   the saved FP from memory pointed to by the current FP.  */
+
+#undef	FRAME_CHAIN
+#define FRAME_CHAIN(thisframe) ((thisframe)->frame? read_memory_integer ((thisframe)->frame, 4): 0)
+
+/* If the chain pointer is zero (either because the saved value fetched
+   by FRAME_CHAIN was zero, or because the current FP was zero so FRAME_CHAIN
+   never fetched anything), we are at the top of the stack.  */
+/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
+
+#undef FRAME_CHAIN_VALID
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
diff --git a/gdb/config/m68k/tm-st2000.h b/gdb/config/m68k/tm-st2000.h
new file mode 100644
index 0000000..8ddf0e9
--- /dev/null
+++ b/gdb/config/m68k/tm-st2000.h
@@ -0,0 +1,20 @@
+/* Parameters for a Tandem ST2000 phone switch.
+   Copyright (C) 1986, 1987, 1989, 199 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-sun2.h b/gdb/config/m68k/tm-sun2.h
new file mode 100644
index 0000000..9970f1e
--- /dev/null
+++ b/gdb/config/m68k/tm-sun2.h
@@ -0,0 +1,23 @@
+/* Parameters for execution on a Sun, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The child target can't deal with floating registers.  */
+#define CANNOT_STORE_REGISTER(regno) ((regno) >= FP0_REGNUM)
+
+#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/tm-sun2os4.h b/gdb/config/m68k/tm-sun2os4.h
new file mode 100644
index 0000000..76c7f99
--- /dev/null
+++ b/gdb/config/m68k/tm-sun2os4.h
@@ -0,0 +1,20 @@
+/* Copyright (C) 1990, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m68k/tm-sun2.h"
+#include "tm-sunos.h"
diff --git a/gdb/config/m68k/tm-sun3.h b/gdb/config/m68k/tm-sun3.h
new file mode 100644
index 0000000..be45db4
--- /dev/null
+++ b/gdb/config/m68k/tm-sun3.h
@@ -0,0 +1,107 @@
+/* Parameters for execution on a Sun, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_SUN3_H
+#define TM_SUN3_H
+
+/* Sun3 status includes fpflags, which shows whether the FPU has been used
+   by the process, and whether the FPU was done with an instruction or 
+   was interrupted in the middle of a long instruction.  See
+   <machine/reg.h>.  */
+/*                      a&d, pc,sr, fp, fpstat, fpflags   */
+
+#define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4 + 4)
+
+#define NUM_REGS 31
+
+#define REGISTER_BYTES_OK(b) \
+     ((b) == REGISTER_BYTES \
+      || (b) == REGISTER_BYTES_FP \
+      || (b) == REGISTER_BYTES_NOFP)
+
+/* If PC contains this instruction, then we know what we are in a system
+   call stub, and the return PC is is at SP+4, instead of SP. */
+
+#define SYSCALL_TRAP 0x4e40	/* trap #0 */
+#define SYSCALL_TRAP_OFFSET 0	/* PC points at trap instruction */
+
+#include "m68k/tm-m68k.h"
+
+/* Disable alternate breakpoint mechanism needed by 68k stub. */
+#undef REMOTE_BREAKPOINT
+
+/* Offsets (in target ints) into jmp_buf.  Not defined by Sun, but at least
+   documented in a comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_PSL 4
+#define JB_D2 5
+#define JB_D3 6
+#define JB_D4 7
+#define JB_D5 8
+#define JB_D6 9
+#define JB_D7 10
+#define JB_A2 11
+#define JB_A3 12
+#define JB_A4 13
+#define JB_A5 14
+#define JB_A6 15
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* If sun3 pcc says that a parameter is a short, it's a short.  */
+#define BELIEVE_PCC_PROMOTION_TYPE
+
+/* Can't define BELIEVE_PCC_PROMOTION for SunOS /bin/cc of SunOS 4.1.1.
+   Apparently Sun fixed this for the sparc but not the sun3.  */
+
+/* The code which tries to deal with this bug is never harmful on a sun3.  */
+#define SUN_FIXED_LBRAC_BUG (0)
+
+/* On the sun3 the kernel pushes a sigcontext on the user stack and then
+   `calls' _sigtramp in user code. _sigtramp saves the floating point status
+   on the stack and calls the signal handler function. The stack does not
+   contain enough information to allow a normal backtrace, but sigcontext
+   contains the saved user pc/sp. FRAME_CHAIN and friends in tm-m68k.h and
+   m68k_find_saved_regs deal with this situation by manufacturing a fake frame
+   for _sigtramp.
+   SIG_PC_FP_OFFSET is the offset from the signal handler frame to the
+   saved pc in sigcontext.
+   SIG_SP_FP_OFFSET is the offset from the signal handler frame to the end
+   of sigcontext which is identical to the saved sp at SIG_PC_FP_OFFSET - 4.
+
+   Please note that it is impossible to correctly backtrace from a breakpoint
+   in _sigtramp as _sigtramp modifies the stack pointer a few times.  */
+
+#undef SIG_PC_FP_OFFSET
+#define SIG_PC_FP_OFFSET 324
+#define SIG_SP_FP_OFFSET 332
+
+#endif /* TM_SUN3_H */
diff --git a/gdb/config/m68k/tm-sun3os4.h b/gdb/config/m68k/tm-sun3os4.h
new file mode 100644
index 0000000..927587b
--- /dev/null
+++ b/gdb/config/m68k/tm-sun3os4.h
@@ -0,0 +1,21 @@
+/* Target machine parameters for Sun-3 under SunOS 4.x, for GDB.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m68k/tm-sun3.h"
+#include "tm-sunos.h"
diff --git a/gdb/config/m68k/tm-vx68.h b/gdb/config/m68k/tm-vx68.h
new file mode 100644
index 0000000..e601bda
--- /dev/null
+++ b/gdb/config/m68k/tm-vx68.h
@@ -0,0 +1,91 @@
+/* Target machine description for VxWorks m68k's, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+/* GCC is probably the only compiler used on this configuration.  So
+   get this right even if the code which detects gcc2_compiled. is
+   still broken.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* We have more complex, useful breakpoints on the target.  */
+#define	DECR_PC_AFTER_BREAK	0
+
+#include "m68k/tm-m68k.h"
+
+/* Takes the current frame-struct pointer and returns the chain-pointer
+   to get to the calling frame.
+
+   If our current frame pointer is zero, we're at the top; else read out
+   the saved FP from memory pointed to by the current FP.  */
+
+#undef	FRAME_CHAIN
+#define FRAME_CHAIN(thisframe) ((thisframe)->frame? read_memory_integer ((thisframe)->frame, 4): 0)
+
+/* If the chain pointer is zero (either because the saved value fetched
+   by FRAME_CHAIN was zero, or because the current FP was zero so FRAME_CHAIN
+   never fetched anything), we are at the top of the stack.  */
+/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
+
+#undef	FRAME_CHAIN_VALID
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
+
+/* FIXME, Longjmp information stolen from Sun-3 config.  Dunno if right.  */
+/* Offsets (in target ints) into jmp_buf.  Not defined by Sun, but at least
+   documented in a comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_PSL 4
+#define JB_D2 5
+#define JB_D3 6
+#define JB_D4 7
+#define JB_D5 8
+#define JB_D6 9
+#define JB_D7 10
+#define JB_A2 11
+#define JB_A3 12
+#define JB_A4 13
+#define JB_A5 14
+#define JB_A6 15
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (18)
+
+/* Number of registers in a ptrace_getfpregs call. */
+
+#define VX_SIZE_FPREGS (8 * REGISTER_RAW_SIZE (FP0_REGNUM) \
+			+ (3 * REGISTER_SIZE))
diff --git a/gdb/config/m68k/vxworks68.mt b/gdb/config/m68k/vxworks68.mt
new file mode 100644
index 0000000..8c97744
--- /dev/null
+++ b/gdb/config/m68k/vxworks68.mt
@@ -0,0 +1,3 @@
+# Target: Motorola m68k running VxWorks
+TDEPFILES= m68k-tdep.o remote-vx.o remote-vx68.o xdr_ld.o xdr_ptrace.o xdr_rdb.o
+TM_FILE= tm-vx68.h
diff --git a/gdb/config/m68k/xm-3b1.h b/gdb/config/m68k/xm-3b1.h
new file mode 100644
index 0000000..d1cc7f1
--- /dev/null
+++ b/gdb/config/m68k/xm-3b1.h
@@ -0,0 +1,85 @@
+/* Parameters for execution on a 3b1.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#define HAVE_TERMIO
+#define USG
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR 0x70000
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{ addr = blockend + regno * 4; }
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+
+#endif
diff --git a/gdb/config/m68k/xm-altos.h b/gdb/config/m68k/xm-altos.h
new file mode 100644
index 0000000..ca93bd1
--- /dev/null
+++ b/gdb/config/m68k/xm-altos.h
@@ -0,0 +1,202 @@
+/* Definitions to make GDB run on an Altos 3068 (m68k running SVR2)
+   Copyright (C) 1987,1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* The altos support would make a good base for a port to other USGR2 systems
+   (like the 3b1 and the Convergent miniframe).  */
+
+/* This is only needed in one file, but it's cleaner to put it here than
+   putting in more #ifdef's.  */
+#include <sys/page.h>
+#include <sys/net.h>
+
+#define USG
+
+#define HAVE_TERMIO
+
+#define CBREAK XTABS	/* It takes all kinds... */
+
+#ifndef R_OK
+#define R_OK 4
+#define W_OK 2
+#define X_OK 1
+#define F_OK 0
+#endif
+
+/* Get sys/wait.h ie. from a Sun and edit it a little (mc68000 to m68k) */
+/* Why bother?  */
+#if 0
+#define HAVE_WAIT_STRUCT
+#endif
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values. */
+
+#define KERNEL_U_ADDR 0x1fbf000
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{	if (regno <= SP_REGNUM) \
+	  addr = blockend + regno * 4; \
+	else if (regno == PS_REGNUM) \
+	  addr = blockend + regno * 4 + 4; \
+	else if (regno == PC_REGNUM) \
+	  addr = blockend + regno * 4 + 2; \
+}
+
+#define REGISTER_ADDR(u_ar0, regno)					\
+  (((regno) < PS_REGNUM)						\
+   ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)])	\
+   : (((regno) == PS_REGNUM)						\
+      ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS))		\
+      : (&((struct exception_stack *) (u_ar0))->e_PC)))
+
+#define FP_REGISTER_ADDR(u, regno)					\
+  (((char *)								\
+    (((regno) < FPC_REGNUM)						\
+     ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
+     : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)])))	\
+   - ((char *) (& u)))
+
+
+#ifndef __GNUC__
+#undef USE_GAS
+#define ALTOS_AS
+#else
+#define USE_GAS
+#endif
+
+/* Motorola assembly format */
+#if !defined(USE_GAS) && !defined(ALTOS)
+#define MOTOROLA
+#endif
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#ifdef MOTOROLA
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("move.l $ end, sp");      \
+  asm ("clr.l fp"); }
+#else
+#ifdef ALTOS_AS
+#define INIT_STACK(beg, end)  \
+{ asm ("global end");         \
+  asm ("mov.l &end,%sp");      \
+  asm ("clr.l %fp"); }
+#else
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel $ end, sp");      \
+  asm ("clrl fp"); }
+#endif
+#endif
+
+/* Push the frame pointer register on the stack.  */
+#ifdef MOTOROLA
+#define PUSH_FRAME_PTR        \
+  asm ("move.l fp, -(sp)");
+#else
+#ifdef ALTOS_AS
+#define PUSH_FRAME_PTR        \
+  asm ("mov.l %fp, -(%sp)");
+#else
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+#endif
+#endif
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#ifdef MOTOROLA
+#define POP_FRAME_PTR  \
+  asm ("move.l (sp), fp");
+#else
+#ifdef ALTOS_AS
+#define POP_FRAME_PTR  \
+  asm ("mov.l (%sp), %fp");
+#else
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+#endif
+#endif
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#ifdef MOTOROLA
+#define PUSH_REGISTERS        \
+{ asm ("clr.w -(sp)");	      \
+  asm ("pea (10,sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+#else
+#ifdef ALTOS_AS
+#define PUSH_REGISTERS        \
+{ asm ("clr.w -(%sp)");	      \
+  asm ("pea (10,%sp)");	      \
+  asm ("movm.l &0xfffe,-(%sp)"); }
+#else
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+#endif
+#endif
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#ifdef MOTOROLA
+#define POP_REGISTERS          \
+{ asm ("subi.l $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+#else
+#ifdef ALTOS_AS
+#define POP_REGISTERS          \
+{ asm ("sub.l &8,28(%sp)");     \
+  asm ("movem (%sp),&0xffff"); \
+  asm ("rte"); }
+#else
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+#endif
+#endif
diff --git a/gdb/config/m68k/xm-apollo68b.h b/gdb/config/m68k/xm-apollo68b.h
new file mode 100644
index 0000000..f0defda
--- /dev/null
+++ b/gdb/config/m68k/xm-apollo68b.h
@@ -0,0 +1,24 @@
+/* Macro definitions for an Apollo m68k in BSD mode
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#define ALIGN_STACK_ON_STARTUP
+
+extern char *strdup();
diff --git a/gdb/config/m68k/xm-apollo68v.h b/gdb/config/m68k/xm-apollo68v.h
new file mode 100644
index 0000000..c87ff47
--- /dev/null
+++ b/gdb/config/m68k/xm-apollo68v.h
@@ -0,0 +1,44 @@
+/* Macro defintions for an Apollo.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Changes for 80386 by Pace Willisson (pace@prep.ai.mit.edu)
+ * July 1988
+ */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* I'm running gdb 3.4 under 386/ix 2.0.2, which is a derivative of AT&T's
+Sys V/386 3.2.
+
+On some machines, gdb crashes when it's starting up while calling the
+vendor's termio tgetent() routine.  It always works when run under
+itself (actually, under 3.2, it's not an infinitely recursive bug.)
+After some poking around, it appears that depending on the environment
+size, or whether you're running YP, or the phase of the moon or something,
+the stack is not always long-aligned when main() is called, and tgetent()
+takes strong offense at that.  On some machines this bug never appears, but
+on those where it does, it occurs quite reliably.  */
+#define ALIGN_STACK_ON_STARTUP
+
+/* define USG if you are using sys5 /usr/include's */
+#define USG
+
+#define HAVE_TERMIO
+
diff --git a/gdb/config/m68k/xm-delta68.h b/gdb/config/m68k/xm-delta68.h
new file mode 100644
index 0000000..6ce705c
--- /dev/null
+++ b/gdb/config/m68k/xm-delta68.h
@@ -0,0 +1,36 @@
+/* Macro definitions for a Delta.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* I'm running gdb 4.9 under sysV68 R3V7.1.
+
+   On some machines, gdb crashes when it's starting up while calling the
+   vendor's termio tgetent() routine.  It always works when run under
+   itself (actually, under 3.2, it's not an infinitely recursive bug.)
+   After some poking around, it appears that depending on the environment
+   size, or whether you're running YP, or the phase of the moon or something,
+   the stack is not always long-aligned when main() is called, and tgetent()
+   takes strong offense at that.  On some machines this bug never appears, but
+   on those where it does, it occurs quite reliably.  */
+#define ALIGN_STACK_ON_STARTUP
+
+#define USG
+
+#define HAVE_TERMIO
diff --git a/gdb/config/m68k/xm-dpx2.h b/gdb/config/m68k/xm-dpx2.h
new file mode 100644
index 0000000..e5532e7
--- /dev/null
+++ b/gdb/config/m68k/xm-dpx2.h
@@ -0,0 +1,26 @@
+/* Parameters for execution on a Bull DPX2.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#define HAVE_TERMIOS
+#define USG
+
+/* Avoid redefinition errors */
+#include <limits.h>
diff --git a/gdb/config/m68k/xm-hp300bsd.h b/gdb/config/m68k/xm-hp300bsd.h
new file mode 100644
index 0000000..5e67792
--- /dev/null
+++ b/gdb/config/m68k/xm-hp300bsd.h
@@ -0,0 +1,85 @@
+/* Parameters for hosting on a Hewlett-Packard 9000/300, running bsd.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Configuration file for HP9000/300 series machine running
+ * University of Utah's 4.3bsd (or 4.4BSD) port.  This is NOT for HP-UX.
+ * Problems to hpbsd-bugs@cs.utah.edu
+ */
+
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+#include <sys/param.h>	/* For INT_MIN */
+
+/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
+#define	ONE_PROCESS_WRITETEXT
+
+extern char *strdup PARAMS ((const char *));
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel #end, sp");      \
+  asm ("movel #0,a6"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel a6,sp@-");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl sp@,a6");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea sp@(10)");	      \
+  asm ("movem #0xfffe,sp@-"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil #8,sp@(28)");     \
+  asm ("movem sp@,#0xffff"); \
+  asm ("rte"); }
diff --git a/gdb/config/m68k/xm-hp300hpux.h b/gdb/config/m68k/xm-hp300hpux.h
new file mode 100644
index 0000000..b6d75d6
--- /dev/null
+++ b/gdb/config/m68k/xm-hp300hpux.h
@@ -0,0 +1,150 @@
+/* Parameters for HP 9000 model 320 hosting, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Define this to indicate problems with traps after continuing.  */
+#define HP_OS_BUG
+
+/* Set flag to indicate whether HP's assembler is in use. */
+#ifdef __GNUC__
+#ifdef __HPUX_ASM__
+#define HPUX_ASM
+#endif
+#else /* not GNU C.  */
+#define HPUX_ASM
+#endif /* not GNU C.  */
+
+/* Define this for versions of hp-ux older than 6.0 */
+/* #define HPUX_VERSION_5 */
+
+/* define USG if you are using sys5 /usr/include's */
+#undef USG	/* In case it was defined in the Makefile for cplus-dem.c */
+#define USG
+
+#define HAVE_TERMIOS
+
+#define REGISTER_ADDR(u_ar0, regno)					\
+  (unsigned int)							\
+  (((regno) < PS_REGNUM)						\
+   ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)])	\
+   : (((regno) == PS_REGNUM)						\
+      ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS))		\
+      : (&((struct exception_stack *) (u_ar0))->e_PC)))
+
+#define FP_REGISTER_ADDR(u, regno)					\
+  (((char *)								\
+    (((regno) < FPC_REGNUM)						\
+     ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
+     : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)])))	\
+   - ((char *) (& u)))
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+#ifndef HPUX_ASM
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+
+#else /* HPUX_ASM */
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)						\
+{ asm ("global end");							\
+  asm ("mov.l &end,%sp");						\
+  asm ("clr.l %a6"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR							\
+  asm ("mov.l %fp,-(%sp)");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR							\
+  asm ("mov.l (%sp),%fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS							\
+{ asm ("clr.w -(%sp)");							\
+  asm ("pea 10(%sp)");							\
+  asm ("movm.l &0xfffe,-(%sp)"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS							\
+{ asm ("subi.l &8,28(%sp)");						\
+  asm ("mov.m (%sp),&0xffff");						\
+  asm ("rte"); }
+
+#endif /* HPUX_ASM */
diff --git a/gdb/config/m68k/xm-isi.h b/gdb/config/m68k/xm-isi.h
new file mode 100644
index 0000000..4e75333
--- /dev/null
+++ b/gdb/config/m68k/xm-isi.h
@@ -0,0 +1,92 @@
+/* Definitions to make GDB run on an ISI Optimum V (3.05) under 4.3bsd.
+   Copyright 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* This has not been tested on ISI's running BSD 4.2, but it will probably
+   work.  */
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+/*#define KERNEL_U_ADDR 0x10800000*/
+#define KERNEL_U_ADDR 0
+
+/* expects blockend to be u.u_ar0 */
+extern int rloc[];  	/* Defined in isi-dep.c */
+#define REGISTER_U_ADDR(addr, blockend, regno)                  \
+{       blockend &= UPAGES*NBPG - 1;                            \
+	if (regno < 18) addr = (int)blockend + rloc[regno]*4;  	\
+        else if (regno < 26) addr = (int) &((struct user *)0)->u_68881_regs \
+            + (regno - 18) * 12;                                \
+        else if (regno < 29) addr = (int) &((struct user *)0)->u_68881_regs \
+            + 8 * 12 + (regno - 26) * 4;                        \
+}
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movl $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
diff --git a/gdb/config/m68k/xm-linux.h b/gdb/config/m68k/xm-linux.h
new file mode 100644
index 0000000..7266cff
--- /dev/null
+++ b/gdb/config/m68k/xm-linux.h
@@ -0,0 +1,40 @@
+/* Native support for linux, for GDB, the GNU debugger.
+   Copyright (C) 1996,1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef XM_LINUX_H
+#define XM_LINUX_H
+
+/* Pick up most of what we need from the generic m68k host include file. */
+
+#include "m68k/xm-m68k.h"
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+#define KERNEL_U_ADDR 0x0
+
+#define HAVE_TERMIOS
+#define NEED_POSIX_SETPGID
+
+/* Linux has sigsetjmp and siglongjmp */
+#define HAVE_SIGSETJMP
+
+/* Need R_OK etc, but USG isn't defined.  */
+#include <unistd.h>
+
+#endif	/* #ifndef XM_LINUX_H */
diff --git a/gdb/config/m68k/xm-m68k.h b/gdb/config/m68k/xm-m68k.h
new file mode 100644
index 0000000..5479408
--- /dev/null
+++ b/gdb/config/m68k/xm-m68k.h
@@ -0,0 +1,22 @@
+/* Macro definitions for running gdb on host machines with m68k cpu's.
+   Copyright (C) 1991, Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygint)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
diff --git a/gdb/config/m68k/xm-m68klynx.h b/gdb/config/m68k/xm-m68klynx.h
new file mode 100644
index 0000000..ded6844
--- /dev/null
+++ b/gdb/config/m68k/xm-m68klynx.h
@@ -0,0 +1,24 @@
+/* Host-dependent definitions for Motorola 680x0 running LynxOS, for GDB.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Get generic LynxOS host definitions. */
+
+#include "xm-lynx.h"
diff --git a/gdb/config/m68k/xm-m68kv4.h b/gdb/config/m68k/xm-m68kv4.h
new file mode 100644
index 0000000..2149c8f
--- /dev/null
+++ b/gdb/config/m68k/xm-m68kv4.h
@@ -0,0 +1,28 @@
+/* Host definitions for GDB on a Motorola 680x0 running SVR4.
+   (Commodore Amiga with amix or Atari TT with ASV)
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Pick up most of what we need from the generic m68k host include file. */
+
+#include "m68k/xm-m68k.h"
+
+/* Pick up more stuff from the generic SVR4 host include file. */
+
+#include "xm-sysv4.h"
diff --git a/gdb/config/m68k/xm-mpw.h b/gdb/config/m68k/xm-mpw.h
new file mode 100644
index 0000000..f0585b3
--- /dev/null
+++ b/gdb/config/m68k/xm-mpw.h
@@ -0,0 +1,24 @@
+/* Macro definitions for running GDB on Apple 68k-based Macintoshes.
+   Copyright (C) 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Use angle brackets so that the common xm-mpw.h is found.  */
+
+#include <xm-mpw.h>
diff --git a/gdb/config/m68k/xm-nbsd.h b/gdb/config/m68k/xm-nbsd.h
new file mode 100644
index 0000000..aa28e19
--- /dev/null
+++ b/gdb/config/m68k/xm-nbsd.h
@@ -0,0 +1,21 @@
+/* Parameters for execution on a Motorola m68k running NetBSD, for GDB.
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic NetBSD host definitions. */
+#include "xm-nbsd.h"
diff --git a/gdb/config/m68k/xm-news.h b/gdb/config/m68k/xm-news.h
new file mode 100644
index 0000000..081337b
--- /dev/null
+++ b/gdb/config/m68k/xm-news.h
@@ -0,0 +1,137 @@
+/* Parameters for execution on a Sony/NEWS, for GDB, the GNU debugger.
+   Copyright 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#include <sys/param.h>	/* For INT_MIN */
+
+#define HAVE_WAIT_STRUCT
+
+/* We can't use "isatty" or "fileno" on this machine.  This isn't good,
+   but it will have to do.  */
+#define ISATTY(FP)	((FP) == stdin || (FP) == stdout)
+
+/* THis is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values. */
+
+#define KERNEL_U_ADDR UADDR
+
+/* The offsets in this macro are from /usr/include/machine/reg.h */
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{   static char offsets[] = { \
+	/*d0-d7:*/1,2,3,4,5,6,7,8, \
+	/*a0-a6:*/9,10,11,12,13,14,15, /*sp:*/-4, /*ps:*/0, /*pc:*/-1, \
+	/*fp0-fp7:*/19,22,25,28,31,34,37,40, /*fpc:*/16,17,18 }; \
+	addr = blockend + 4 * offsets[regno]; \
+}
+
+/* NewsOS 3.3 does not define errno in <errno.h>.  */
+extern int errno;
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Use GNU assembler instead of standard assembler */
+#define USE_GAS
+
+/* Motorola assembly format */
+#ifndef USE_GAS
+#define MOTOROLA
+#endif
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#ifdef MOTOROLA
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("move.l $ end, sp");      \
+  asm ("clr.l fp"); }
+#else
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel $ end, sp");      \
+  asm ("clrl fp"); }
+#endif
+
+/* Push the frame pointer register on the stack.  */
+#ifdef MOTOROLA
+#define PUSH_FRAME_PTR        \
+  asm ("move.l fp, -(sp)");
+#else
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+#endif
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#ifdef MOTOROLA
+#define POP_FRAME_PTR  \
+  asm ("move.l (sp), fp");
+#else
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+#endif
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#ifdef MOTOROLA
+#define PUSH_REGISTERS        \
+{ asm ("clr.w -(sp)");	      \
+  asm ("pea (10,sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+#else
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+#endif
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#ifdef MOTOROLA
+#define POP_REGISTERS          \
+{ asm ("subi.l $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+#else
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
+#endif
diff --git a/gdb/config/m68k/xm-news1000.h b/gdb/config/m68k/xm-news1000.h
new file mode 100644
index 0000000..b70234c
--- /dev/null
+++ b/gdb/config/m68k/xm-news1000.h
@@ -0,0 +1,26 @@
+/* Parameters for a Sony/NEWS series 1000 with News-OS version 3,
+   for GDB, the GNU debugger.
+   Copyright (C) 1990 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is required by Sony include files like <sys/user.h> so we
+   get the right offset into the u area.  Relying on the compiler
+   to define this only works for cc, not gcc.  */
+#undef mc68030
+#define mc68030
+#include "m68k/xm-news.h"
diff --git a/gdb/config/m68k/xm-sun2.h b/gdb/config/m68k/xm-sun2.h
new file mode 100644
index 0000000..457451c
--- /dev/null
+++ b/gdb/config/m68k/xm-sun2.h
@@ -0,0 +1,78 @@
+/* Parameters for execution on a Sun, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR 0x2800
+
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel fp, -(sp)");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea 10(sp)");	      \
+  asm ("movem $ 0xfffe,-(sp)"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil $8,28(sp)");     \
+  asm ("movem (sp),$ 0xffff"); \
+  asm ("rte"); }
diff --git a/gdb/config/m68k/xm-sun3.h b/gdb/config/m68k/xm-sun3.h
new file mode 100644
index 0000000..3de7446
--- /dev/null
+++ b/gdb/config/m68k/xm-sun3.h
@@ -0,0 +1,73 @@
+/* Parameters for execution on a Sun, for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
+  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
+  0, 0, 0, 0, 0, 0, 0, 0, \
+  SIGILL }
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movel #end, sp");      \
+  asm ("movel #0,a6"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("movel a6,sp@-");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl sp@,a6");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("clrw -(sp)");	      \
+  asm ("pea sp@(10)");	      \
+  asm ("movem #0xfffe,sp@-"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS          \
+{ asm ("subil #8,sp@(28)");     \
+  asm ("movem sp@,#0xffff"); \
+  asm ("rte"); }
diff --git a/gdb/config/m68k/xm-sun3os4.h b/gdb/config/m68k/xm-sun3os4.h
new file mode 100644
index 0000000..faf3b7d
--- /dev/null
+++ b/gdb/config/m68k/xm-sun3os4.h
@@ -0,0 +1,21 @@
+/* Macro definitions for a sun 3 running os 4.
+   Copyright (C) 1989, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m68k/xm-sun3.h"
+#define FPU
diff --git a/gdb/config/m88k/cxux.mh b/gdb/config/m88k/cxux.mh
new file mode 100644
index 0000000..cb02225
--- /dev/null
+++ b/gdb/config/m88k/cxux.mh
@@ -0,0 +1,7 @@
+# Host: Motorola 88k running CX/UX
+
+XM_FILE= xm-cxux.h
+XDEPFILES= 
+
+NAT_FILE= nm-cxux.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o cxux-nat.o corelow.o core-aout.o
diff --git a/gdb/config/m88k/cxux.mt b/gdb/config/m88k/cxux.mt
new file mode 100644
index 0000000..295de84
--- /dev/null
+++ b/gdb/config/m88k/cxux.mt
@@ -0,0 +1,3 @@
+# Target: Motorola 88k running Harris CX/UX
+TDEPFILES= m88k-tdep.o remote-bug.o
+TM_FILE= tm-cxux.h
diff --git a/gdb/config/m88k/delta88.mh b/gdb/config/m88k/delta88.mh
new file mode 100644
index 0000000..824967a
--- /dev/null
+++ b/gdb/config/m88k/delta88.mh
@@ -0,0 +1,7 @@
+# Host: Motorola 88k running SVR3
+
+XM_FILE= xm-delta88.h
+XDEPFILES= 
+
+NAT_FILE= nm-m88k.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o m88k-nat.o corelow.o core-aout.o
diff --git a/gdb/config/m88k/delta88.mt b/gdb/config/m88k/delta88.mt
new file mode 100644
index 0000000..c8e669b
--- /dev/null
+++ b/gdb/config/m88k/delta88.mt
@@ -0,0 +1,3 @@
+# Target: Motorola 88k running SVR3
+TDEPFILES= m88k-tdep.o
+TM_FILE= tm-delta88.h
diff --git a/gdb/config/m88k/delta88v4.mh b/gdb/config/m88k/delta88v4.mh
new file mode 100644
index 0000000..82be883
--- /dev/null
+++ b/gdb/config/m88k/delta88v4.mh
@@ -0,0 +1,7 @@
+# Host: Motorola 88k running SVR4
+
+XM_FILE= xm-delta88v4.h
+XDEPFILES= 
+
+NAT_FILE= nm-delta88v4.h
+NATDEPFILES= fork-child.o m88k-nat.o corelow.o core-regset.o procfs.o solib.o
diff --git a/gdb/config/m88k/delta88v4.mt b/gdb/config/m88k/delta88v4.mt
new file mode 100644
index 0000000..7797d4b
--- /dev/null
+++ b/gdb/config/m88k/delta88v4.mt
@@ -0,0 +1,3 @@
+# Target: Motorola 88k running SVR4
+TDEPFILES= m88k-tdep.o
+TM_FILE= tm-delta88v4.h
diff --git a/gdb/config/m88k/m88k.mh b/gdb/config/m88k/m88k.mh
new file mode 100644
index 0000000..6933265
--- /dev/null
+++ b/gdb/config/m88k/m88k.mh
@@ -0,0 +1,5 @@
+# Host: Motorola 88000 running DGUX
+XDEPFILES= 
+XM_FILE= xm-dgux.h
+NAT_FILE= nm-m88k.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o m88k-nat.o
diff --git a/gdb/config/m88k/m88k.mt b/gdb/config/m88k/m88k.mt
new file mode 100644
index 0000000..ca3fab4
--- /dev/null
+++ b/gdb/config/m88k/m88k.mt
@@ -0,0 +1,3 @@
+# Target: Motorola 88k Binary Compatibility Standard
+TDEPFILES= m88k-tdep.o remote-bug.o
+TM_FILE= tm-m88k.h
diff --git a/gdb/config/m88k/nm-cxux.h b/gdb/config/m88k/nm-cxux.h
new file mode 100644
index 0000000..fec9536
--- /dev/null
+++ b/gdb/config/m88k/nm-cxux.h
@@ -0,0 +1,32 @@
+/* Native definitions for Motorola 88K running Harris CX/UX
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Override the standard fetch/store definitions.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+        (addr) = m88k_register_u_addr ((blockend),(regno));
+
+#define ATTACH_DETACH
+
+#define PTRACE_ATTACH 128
+#define PTRACE_DETACH 129
+
+
diff --git a/gdb/config/m88k/nm-delta88v4.h b/gdb/config/m88k/nm-delta88v4.h
new file mode 100644
index 0000000..9c1a30e
--- /dev/null
+++ b/gdb/config/m88k/nm-delta88v4.h
@@ -0,0 +1,21 @@
+/* Native machine description for Motorola Delta 88 box, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/nm-m88k.h"
+#include "nm-sysv4.h"
diff --git a/gdb/config/m88k/nm-m88k.h b/gdb/config/m88k/nm-m88k.h
new file mode 100644
index 0000000..95eca0a
--- /dev/null
+++ b/gdb/config/m88k/nm-m88k.h
@@ -0,0 +1,24 @@
+/* Native support macros for m88k, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+        (addr) = m88k_register_u_addr ((blockend),(regno));
diff --git a/gdb/config/m88k/tm-cxux.h b/gdb/config/m88k/tm-cxux.h
new file mode 100644
index 0000000..e59c6da
--- /dev/null
+++ b/gdb/config/m88k/tm-cxux.h
@@ -0,0 +1,59 @@
+/* Target definitions for m88k running Harris CX/UX.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HARRIS_TARGET 1
+
+#define CXUX_TARGET 1
+
+/* Type of X registers, as supplied by the OS */
+
+typedef struct {
+   long w1, w2, w3, w4;
+} X_REGISTER_RAW_TYPE;
+
+#define X_REGISTER_VIRTUAL_TYPE double
+
+#include "m88k/tm-m88k.h"
+
+#define ADD_SHARED_SYMBOL_FILES(args,have_tty)  add_shared_symbol_files ()
+
+#define CONVERT_REGISTER_ADDRESS
+
+/* Always allocate space for both, but recognize that the m88100 has no
+   FP_REGS.  */
+
+#undef ARCH_NUM_REGS
+#define ARCH_NUM_REGS (target_is_m88110 ? (GP_REGS + FP_REGS) : (GP_REGS))
+
+/* Don't need this grotesquerie.  */
+
+#undef SHIFT_INST_REGS
+
+/* Extended registers are treated as 16 bytes by Harris' OS's. 
+   We treat them as 16 bytes here for consistency's sake.  */
+
+#undef REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) ((N) < XFP_REGNUM ? 4 : 16)
+
+#undef REGISTER_BYTE
+#define REGISTER_BYTE(N) \
+  ((N) >= XFP_REGNUM \
+   ? (((GP_REGS) * REGISTER_RAW_SIZE(0)) + \
+      (((N) - XFP_REGNUM) * REGISTER_RAW_SIZE(XFP_REGNUM))) \
+   : ((N) * REGISTER_RAW_SIZE(0)))
diff --git a/gdb/config/m88k/tm-delta88.h b/gdb/config/m88k/tm-delta88.h
new file mode 100644
index 0000000..c0a9c4a
--- /dev/null
+++ b/gdb/config/m88k/tm-delta88.h
@@ -0,0 +1,26 @@
+/* Target machine description for Motorola Delta 88 box, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/tm-m88k.h"
+
+#define DELTA88
+
+#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigcode", (name)))
+#define SIGTRAMP_FRAME_FIXUP(frame) (frame) += 0x20
+#define SIGTRAMP_SP_FIXUP(sp) (sp) = read_memory_integer((sp), 4)
diff --git a/gdb/config/m88k/tm-delta88v4.h b/gdb/config/m88k/tm-delta88v4.h
new file mode 100644
index 0000000..112a4a6
--- /dev/null
+++ b/gdb/config/m88k/tm-delta88v4.h
@@ -0,0 +1,30 @@
+/* Target machine description for Motorola Delta 88 box, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define DELTA88
+
+#include "m88k/tm-m88k.h"
+#include "tm-sysv4.h"
+
+/* If we don't define this, backtraces go on forever.  */
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+#define IN_SIGTRAMP(pc, name) ((name) && (STREQ ("signalhandler", (name)) \
+                                          || STREQ("sigacthandler", (name))))
+#define SIGTRAMP_SP_FIXUP(sp) (sp) = read_memory_integer((sp)+0xcd8, 4)
diff --git a/gdb/config/m88k/tm-m88k.h b/gdb/config/m88k/tm-m88k.h
new file mode 100644
index 0000000..390cdef
--- /dev/null
+++ b/gdb/config/m88k/tm-m88k.h
@@ -0,0 +1,620 @@
+/* Target machine description for generic Motorola 88000, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* g++ support is not yet included.  */
+
+/* Define the bit, byte, and word ordering of the machine.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* We cache information about saved registers in the frame structure,
+   to save us from having to re-scan function prologues every time
+   a register in a non-current frame is accessed.  */
+
+#define EXTRA_FRAME_INFO 	\
+	struct frame_saved_regs *fsr;	\
+	CORE_ADDR locals_pointer;	\
+	CORE_ADDR args_pointer;
+
+/* Zero the frame_saved_regs pointer when the frame is initialized,
+   so that FRAME_FIND_SAVED_REGS () will know to allocate and
+   initialize a frame_saved_regs struct the first time it is called.
+   Set the arg_pointer to -1, which is not valid; 0 and other values
+   indicate real, cached values.  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+	init_extra_frame_info (fromleaf, fi)
+extern void init_extra_frame_info ();
+
+#define IEEE_FLOAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(frompc)   \
+	{ (frompc) = skip_prologue (frompc); }
+extern CORE_ADDR skip_prologue ();
+
+/* The m88k kernel aligns all instructions on 4-byte boundaries.  The
+   kernel also uses the least significant two bits for its own hocus
+   pocus.  When gdb receives an address from the kernel, it needs to
+   preserve those right-most two bits, but gdb also needs to be careful
+   to realize that those two bits are not really a part of the address
+   of an instruction.  Shrug.  */
+
+extern CORE_ADDR m88k_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) m88k_addr_bits_remove (addr)
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  (ADDR_BITS_REMOVE (read_register (SRP_REGNUM)))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+/* instruction 0xF000D1FF is 'tb0 0,r0,511'
+   If Bit bit 0 of r0 is clear (always true),
+   initiate exception processing (trap).
+ */
+#define BREAKPOINT {0xF0, 0x00, 0xD1, 0xFF}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define GP_REGS (38)
+#define FP_REGS (32)
+#define NUM_REGS (GP_REGS + FP_REGS)
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {\
+			  "r0",\
+			  "r1",\
+			  "r2",\
+			  "r3",\
+			  "r4",\
+			  "r5",\
+			  "r6",\
+			  "r7",\
+			  "r8",\
+			  "r9",\
+			  "r10",\
+			  "r11",\
+			  "r12",\
+			  "r13",\
+			  "r14",\
+			  "r15",\
+			  "r16",\
+			  "r17",\
+			  "r18",\
+			  "r19",\
+			  "r20",\
+			  "r21",\
+			  "r22",\
+			  "r23",\
+			  "r24",\
+			  "r25",\
+			  "r26",\
+			  "r27",\
+			  "r28",\
+			  "r29",\
+			  "r30",\
+			  "r31",\
+			  "psr",\
+			  "fpsr",\
+			  "fpcr",\
+			  "sxip",\
+			  "snip",\
+			  "sfip",\
+			  "x0",\
+			  "x1",\
+			  "x2",\
+			  "x3",\
+			  "x4",\
+			  "x5",\
+			  "x6",\
+			  "x7",\
+			  "x8",\
+			  "x9",\
+			  "x10",\
+			  "x11",\
+			  "x12",\
+			  "x13",\
+			  "x14",\
+			  "x15",\
+			  "x16",\
+			  "x17",\
+			  "x18",\
+			  "x19",\
+			  "x20",\
+			  "x21",\
+			  "x22",\
+			  "x23",\
+			  "x24",\
+			  "x25",\
+			  "x26",\
+			  "x27",\
+			  "x28",\
+			  "x29",\
+			  "x30",\
+			  "x31",\
+			  "vbr",\
+			  "dmt0",\
+			  "dmd0",\
+			  "dma0",\
+			  "dmt1",\
+			  "dmd1",\
+			  "dma1",\
+			  "dmt2",\
+			  "dmd2",\
+			  "dma2",\
+			  "sr0",\
+			  "sr1",\
+			  "sr2",\
+			  "sr3",\
+			  "fpecr",\
+			  "fphs1",\
+			  "fpls1",\
+			  "fphs2",\
+			  "fpls2",\
+			  "fppt",\
+			  "fprh",\
+			  "fprl",\
+			  "fpit",\
+			  "fpsr",\
+			  "fpcr",\
+		      }
+
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define R0_REGNUM 0		/* Contains the constant zero */
+#define SRP_REGNUM 1		/* Contains subroutine return pointer */
+#define RV_REGNUM 2		/* Contains simple return values */
+#define SRA_REGNUM 12		/* Contains address of struct return values */
+#define SP_REGNUM 31		/* Contains address of top of stack */
+
+/* Instruction pointer notes...
+
+   On the m88100:
+
+   * cr04 = sxip.  On exception, contains the excepting pc (probably).
+   On rte, is ignored.
+
+   * cr05 = snip.  On exception, contains the NPC (next pc).  On rte,
+   pc is loaded from here.
+
+   * cr06 = sfip.  On exception, contains the NNPC (next next pc).  On
+   rte, the NPC is loaded from here.
+
+   * lower two bits of each are flag bits.  Bit 1 is V means address
+   is valid.  If address is not valid, bit 0 is ignored.  Otherwise,
+   bit 0 is E and asks for an exception to be taken if this
+   instruction is executed.
+
+   On the m88110:
+
+   * cr04 = exip.  On exception, contains the address of the excepting
+   pc (always).  On rte, pc is loaded from here.  Bit 0, aka the D
+   bit, is a flag saying that the offending instruction was in a
+   branch delay slot.  If set, then cr05 contains the NPC.
+
+   * cr05 = enip.  On exception, if the instruction pointed to by cr04
+   was in a delay slot as indicated by the bit 0 of cr04, aka the D
+   bit, the cr05 contains the NPC.  Otherwise ignored.
+
+   * cr06 is invalid  */
+
+/* Note that the Harris Unix kernels emulate the m88100's behavior on
+   the m88110.  */
+
+#define SXIP_REGNUM 35		/* On m88100, Contains Shadow Execute
+				   Instruction Pointer.  */
+#define SNIP_REGNUM 36		/* On m88100, Contains Shadow Next
+				   Instruction Pointer.  */
+#define SFIP_REGNUM 37		/* On m88100, Contains Shadow Fetched
+				   Intruction pointer.  */
+
+#define EXIP_REGNUM 35		/* On m88110, Contains Exception
+				   Executing Instruction Pointer.  */
+#define ENIP_REGNUM 36		/* On m88110, Contains the Exception
+				   Next Instruction Pointer.  */
+
+#define PC_REGNUM SXIP_REGNUM	/* Program Counter */
+#define NPC_REGNUM SNIP_REGNUM	/* Next Program Counter */
+#define NNPC_REGNUM SFIP_REGNUM /* Next Next Program Counter */
+
+#define PSR_REGNUM 32           /* Processor Status Register */
+#define FPSR_REGNUM 33		/* Floating Point Status Register */
+#define FPCR_REGNUM 34		/* Floating Point Control Register */
+#define XFP_REGNUM 38		/* First Extended Float Register */
+#define X0_REGNUM XFP_REGNUM	/* Which also contains the constant zero */
+
+/* This is rather a confusing lie.  Our m88k port using a stack pointer value
+   for the frame address.  Hence, the frame address and the frame pointer are
+   only indirectly related.  The value of this macro is the register number
+   fetched by the machine "independent" portions of gdb when they want to know
+   about a frame address.  Thus, we lie here and claim that FP_REGNUM is
+   SP_REGNUM.  */
+#define FP_REGNUM SP_REGNUM	/* Reg fetched to locate frame when pgm stops */
+#define ACTUAL_FP_REGNUM 30
+
+/* PSR status bit definitions.  */
+
+#define PSR_MODE		0x80000000
+#define PSR_BYTE_ORDER		0x40000000
+#define PSR_SERIAL_MODE		0x20000000
+#define PSR_CARRY		0x10000000
+#define PSR_SFU_DISABLE		0x000003f0
+#define PSR_SFU1_DISABLE	0x00000008
+#define PSR_MXM			0x00000004
+#define PSR_IND			0x00000002
+#define PSR_SFRZ		0x00000001
+
+
+
+/* The following two comments come from the days prior to the m88110
+   port.  The m88110 handles the instruction pointers differently.  I
+   do not know what any m88110 kernels do as the m88110 port I'm
+   working with is for an embedded system.  rich@cygnus.com
+   13-sept-93.  */
+
+/* BCS requires that the SXIP_REGNUM (or PC_REGNUM) contain the
+   address of the next instr to be executed when a breakpoint occurs.
+   Because the kernel gets the next instr (SNIP_REGNUM), the instr in
+   SNIP needs to be put back into SFIP, and the instr in SXIP should
+   be shifted to SNIP */
+
+/* Are you sitting down?  It turns out that the 88K BCS (binary
+   compatibility standard) folks originally felt that the debugger
+   should be responsible for backing up the IPs, not the kernel (as is
+   usually done).  Well, they have reversed their decision, and in
+   future releases our kernel will be handling the backing up of the
+   IPs.  So, eventually, we won't need to do the SHIFT_INST_REGS
+   stuff.  But, for now, since there are 88K systems out there that do
+   need the debugger to do the IP shifting, and since there will be
+   systems where the kernel does the shifting, the code is a little
+   more complex than perhaps it needs to be (we still go inside
+   SHIFT_INST_REGS, and if the shifting hasn't occurred then gdb goes
+   ahead and shifts).  */
+
+extern int target_is_m88110;
+#define SHIFT_INST_REGS() \
+if (!target_is_m88110) \
+{ \
+    CORE_ADDR pc = read_register (PC_REGNUM); \
+    CORE_ADDR npc = read_register (NPC_REGNUM); \
+    if (pc != npc) \
+    { \
+	write_register (NNPC_REGNUM, npc); \
+	write_register (NPC_REGNUM, pc); \
+    } \
+}
+
+    /* Storing the following registers is a no-op. */
+#define CANNOT_STORE_REGISTER(regno)	(((regno) == R0_REGNUM) \
+					 || ((regno) == X0_REGNUM))
+
+  /* Number of bytes of storage in the actual machine representation
+     for register N.  On the m88k,  the general purpose registers are 4
+     bytes and the 88110 extended registers are 10 bytes. */
+
+#define REGISTER_RAW_SIZE(N) ((N) < XFP_REGNUM ? 4 : 10)
+
+  /* Total amount of space needed to store our copies of the machine's
+     register state, the array `registers'.  */
+
+#define REGISTER_BYTES ((GP_REGS * REGISTER_RAW_SIZE(0)) \
+			+ (FP_REGS * REGISTER_RAW_SIZE(XFP_REGNUM)))
+
+  /* Index within `registers' of the first byte of the space for
+     register N.  */
+
+#define REGISTER_BYTE(N) (((N) * REGISTER_RAW_SIZE(0)) \
+			  + ((N) >= XFP_REGNUM \
+			     ? (((N) - XFP_REGNUM) \
+				* REGISTER_RAW_SIZE(XFP_REGNUM)) \
+			     : 0))
+
+  /* Number of bytes of storage in the program's representation for
+     register N.  On the m88k, all registers are 4 bytes excepting the
+     m88110 extended registers which are 8 byte doubles. */
+
+#define REGISTER_VIRTUAL_SIZE(N) ((N) < XFP_REGNUM ? 4 : 8)
+
+  /* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE (REGISTER_RAW_SIZE(XFP_REGNUM))
+
+  /* Largest value REGISTER_VIRTUAL_SIZE can have.
+     Are FPS1, FPS2, FPR "virtual" regisers? */
+
+#define MAX_REGISTER_VIRTUAL_SIZE (REGISTER_RAW_SIZE(XFP_REGNUM))
+
+  /* Nonzero if register N requires conversion
+     from raw format to virtual format.  */
+
+#define REGISTER_CONVERTIBLE(N) ((N) >= XFP_REGNUM)
+
+#include "floatformat.h"
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  double val; \
+  floatformat_to_double (&floatformat_m88110_ext, (FROM), &val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+{ \
+  double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  floatformat_from_double (&floatformat_m88110_ext, &val, (TO)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+((N) >= XFP_REGNUM \
+ ? builtin_type_double \
+ : ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM \
+    ? lookup_pointer_type (builtin_type_void) : builtin_type_int))
+
+/* The 88k call/return conventions call for "small" values to be returned
+   into consecutive registers starting from r2.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy ((VALBUF), &(((char *)REGBUF)[REGISTER_BYTE(RV_REGNUM)]), TYPE_LENGTH (TYPE))
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (2*REGISTER_RAW_SIZE(0), (VALBUF), TYPE_LENGTH (TYPE))
+
+/* In COFF, if PCC says a parameter is a short or a char, do not
+   change it to int (it seems the convention is to change it). */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+extern CORE_ADDR frame_chain ();
+extern int frame_chain_valid ();
+extern int frameless_function_invocation ();
+
+#define FRAME_CHAIN(thisframe) \
+	frame_chain (thisframe)
+
+#define	FRAMELESS_FUNCTION_INVOCATION(frame, fromleaf)	\
+	fromleaf = frameless_function_invocation (frame)
+
+/* Define other aspects of the stack frame.  */
+
+#define FRAME_SAVED_PC(FRAME)	\
+	frame_saved_pc (FRAME)
+extern CORE_ADDR frame_saved_pc ();
+
+#define FRAME_ARGS_ADDRESS(fi)	\
+	frame_args_address (fi)
+extern CORE_ADDR frame_args_address ();
+
+#define FRAME_LOCALS_ADDRESS(fi) \
+	frame_locals_address (fi)
+extern CORE_ADDR frame_locals_address ();
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)  ((numargs) = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+/* On the 88k, parameter registers get stored into the so called "homing"
+   area.  This *always* happens when you compiled with GCC and use -g.
+   Also, (with GCC and -g) the saving of the parameter register values
+   always happens right within the function prologue code, so these register
+   values can generally be relied upon to be already copied into their
+   respective homing slots by the time you will normally try to look at
+   them (we hope).
+
+   Note that homing area stack slots are always at *positive* offsets from
+   the frame pointer.  Thus, the homing area stack slots for the parameter
+   registers (passed values) for a given function are actually part of the
+   frame area of the caller.  This is unusual, but it should not present
+   any special problems for GDB.
+
+   Note also that on the 88k, we are only interested in finding the
+   registers that might have been saved in memory.  This is a subset of
+   the whole set of registers because the standard calling sequence allows
+   the called routine to clobber many registers.
+
+   We could manage to locate values for all of the so called "preserved"
+   registers (some of which may get saved within any particular frame) but
+   that would require decoding all of the tdesc information.  That would be
+   nice information for GDB to have, but it is not strictly manditory if we
+   can live without the ability to look at values within (or backup to)
+   previous frames.
+*/
+
+struct frame_saved_regs;
+struct frame_info;
+
+void frame_find_saved_regs PARAMS((struct frame_info *fi,
+				   struct frame_saved_regs *fsr));
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+        frame_find_saved_regs (frame_info, &frame_saved_regs)
+
+
+#define POP_FRAME pop_frame ()
+extern void pop_frame ();
+
+/* Call function stuff contributed by Kevin Buettner of Motorola.  */
+
+#define CALL_DUMMY_LOCATION AFTER_TEXT_END
+
+extern void m88k_push_dummy_frame();
+#define PUSH_DUMMY_FRAME	m88k_push_dummy_frame()
+
+#define CALL_DUMMY { 				\
+0x67ff00c0,	/*   0:   subu	#sp,#sp,0xc0 */ \
+0x243f0004,	/*   4:   st	#r1,#sp,0x4 */ \
+0x245f0008,	/*   8:   st	#r2,#sp,0x8 */ \
+0x247f000c,	/*   c:   st	#r3,#sp,0xc */ \
+0x249f0010,	/*  10:   st	#r4,#sp,0x10 */ \
+0x24bf0014,	/*  14:   st	#r5,#sp,0x14 */ \
+0x24df0018,	/*  18:   st	#r6,#sp,0x18 */ \
+0x24ff001c,	/*  1c:   st	#r7,#sp,0x1c */ \
+0x251f0020,	/*  20:   st	#r8,#sp,0x20 */ \
+0x253f0024,	/*  24:   st	#r9,#sp,0x24 */ \
+0x255f0028,	/*  28:   st	#r10,#sp,0x28 */ \
+0x257f002c,	/*  2c:   st	#r11,#sp,0x2c */ \
+0x259f0030,	/*  30:   st	#r12,#sp,0x30 */ \
+0x25bf0034,	/*  34:   st	#r13,#sp,0x34 */ \
+0x25df0038,	/*  38:   st	#r14,#sp,0x38 */ \
+0x25ff003c,	/*  3c:   st	#r15,#sp,0x3c */ \
+0x261f0040,	/*  40:   st	#r16,#sp,0x40 */ \
+0x263f0044,	/*  44:   st	#r17,#sp,0x44 */ \
+0x265f0048,	/*  48:   st	#r18,#sp,0x48 */ \
+0x267f004c,	/*  4c:   st	#r19,#sp,0x4c */ \
+0x269f0050,	/*  50:   st	#r20,#sp,0x50 */ \
+0x26bf0054,	/*  54:   st	#r21,#sp,0x54 */ \
+0x26df0058,	/*  58:   st	#r22,#sp,0x58 */ \
+0x26ff005c,	/*  5c:   st	#r23,#sp,0x5c */ \
+0x271f0060,	/*  60:   st	#r24,#sp,0x60 */ \
+0x273f0064,	/*  64:   st	#r25,#sp,0x64 */ \
+0x275f0068,	/*  68:   st	#r26,#sp,0x68 */ \
+0x277f006c,	/*  6c:   st	#r27,#sp,0x6c */ \
+0x279f0070,	/*  70:   st	#r28,#sp,0x70 */ \
+0x27bf0074,	/*  74:   st	#r29,#sp,0x74 */ \
+0x27df0078,	/*  78:   st	#r30,#sp,0x78 */ \
+0x63df0000,	/*  7c:   addu	#r30,#sp,0x0 */ \
+0x145f0000,	/*  80:   ld	#r2,#sp,0x0 */ \
+0x147f0004,	/*  84:   ld	#r3,#sp,0x4 */ \
+0x149f0008,	/*  88:   ld	#r4,#sp,0x8 */ \
+0x14bf000c,	/*  8c:   ld	#r5,#sp,0xc */ \
+0x14df0010,	/*  90:   ld	#r6,#sp,0x10 */ \
+0x14ff0014,	/*  94:   ld	#r7,#sp,0x14 */ \
+0x151f0018,	/*  98:   ld	#r8,#sp,0x18 */ \
+0x153f001c,	/*  9c:   ld	#r9,#sp,0x1c */ \
+0x5c200000,	/*  a0:   or.u	#r1,#r0,0x0 */ \
+0x58210000,	/*  a4:   or	#r1,#r1,0x0 */ \
+0xf400c801,	/*  a8:   jsr	#r1 */ \
+0xf000d1ff	/*  ac:   tb0	0x0,#r0,0x1ff */ \
+}
+
+#define CALL_DUMMY_START_OFFSET 0x80
+#define CALL_DUMMY_LENGTH 0xb0
+
+/* FIXME: byteswapping.  */
+#define FIX_CALL_DUMMY(dummy, pc, fun, nargs, args, type, gcc_p)	\
+{ 									\
+  *(unsigned long *)((char *) (dummy) + 0xa0) |=			\
+	(((unsigned long) (fun)) >> 16);				\
+  *(unsigned long *)((char *) (dummy) + 0xa4) |=			\
+	(((unsigned long) (fun)) & 0xffff);				\
+  pc = text_end;							\
+}
+
+/* Stack must be aligned on 64-bit boundaries when synthesizing
+   function calls. */
+
+#define STACK_ALIGN(addr) (((addr) + 7) & -8)
+
+#define STORE_STRUCT_RETURN(addr, sp) \
+    write_register (SRA_REGNUM, (addr))
+
+#define NEED_TEXT_START_END 1
+
+/* According to the MC88100 RISC Microprocessor User's Manual, section
+   6.4.3.1.2:
+
+   	... can be made to return to a particular instruction by placing a
+	valid instruction address in the SNIP and the next sequential
+	instruction address in the SFIP (with V bits set and E bits clear).
+	The rte resumes execution at the instruction pointed to by the 
+	SNIP, then the SFIP.
+
+   The E bit is the least significant bit (bit 0).  The V (valid) bit is
+   bit 1.  This is why we logical or 2 into the values we are writing
+   below.  It turns out that SXIP plays no role when returning from an
+   exception so nothing special has to be done with it.  We could even
+   (presumably) give it a totally bogus value.
+
+   -- Kevin Buettner
+*/
+ 
+#define TARGET_WRITE_PC(val, pid) { \
+  write_register_pid(SXIP_REGNUM, (long) val, pid); \
+  write_register_pid(SNIP_REGNUM, (long) val | 2, pid); \
+  write_register_pid(SFIP_REGNUM, ((long) val | 2) + 4, pid); \
+}
diff --git a/gdb/config/m88k/xm-cxux.h b/gdb/config/m88k/xm-cxux.h
new file mode 100644
index 0000000..582c613
--- /dev/null
+++ b/gdb/config/m88k/xm-cxux.h
@@ -0,0 +1,66 @@
+/* Host-machine dependent parameters for Motorola 88000, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/xm-m88k.h"
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#if !defined (USG)
+#define USG 1
+#endif
+
+#include <sys/param.h>
+
+#define x_foff _x_x._x_offset
+#define x_fname _x_name
+#define USER ptrace_user
+/*
+#define _BSD_WAIT_FLAVOR
+*/
+
+#define HAVE_TERMIO
+
+#ifndef USIZE
+#define USIZE 2048
+#ifndef UPAGES
+#define UPAGES USIZE
+#endif
+#endif
+#define NBPG NBPC
+
+/* Get rid of any system-imposed stack limit if possible.  */
+
+#define SET_STACK_LIMIT_HUGE
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+/* Since registers r0 through r31 are stored directly in the struct ptrace_user,
+   (for m88k BCS)
+   the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */
+
+#define KERNEL_U_ADDR 0
+
+/* The CX/UX C compiler doesn't permit complex expressions as array bounds. */
+#define STRICT_ANSI_BOUNDS
+
+#define CORE_REGISTER_ADDR(regno, reg_ptr) \
+   m88k_harris_core_register_addr(regno, reg_ptr)
+
diff --git a/gdb/config/m88k/xm-delta88.h b/gdb/config/m88k/xm-delta88.h
new file mode 100644
index 0000000..2166947
--- /dev/null
+++ b/gdb/config/m88k/xm-delta88.h
@@ -0,0 +1,45 @@
+/* Host machine description for Motorola Delta 88 system, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/xm-m88k.h"
+
+#if !defined (USG)
+#define USG 1
+#endif
+
+#include <sys/param.h>
+#include <sys/time.h>
+
+#define HAVE_TERMIO
+
+/*#define USIZE 2048*/
+/*#define NBPG NBPC*/
+/* Might be defined in <sys/param.h>.  I suspect this define was a relic
+   from before when BFD did core files.  */
+/* #define UPAGES USIZE */
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+/* Since registers r0 through r31 are stored directly in the struct ptrace_user,
+   (for m88k BCS)
+   the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */
+
+#define KERNEL_U_ADDR 0
diff --git a/gdb/config/m88k/xm-delta88v4.h b/gdb/config/m88k/xm-delta88v4.h
new file mode 100644
index 0000000..55c9e2d
--- /dev/null
+++ b/gdb/config/m88k/xm-delta88v4.h
@@ -0,0 +1,22 @@
+/* Host machine description for Motorola Delta 88 box, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/xm-m88k.h"
+
+#include "xm-sysv4.h"
diff --git a/gdb/config/m88k/xm-dgux.h b/gdb/config/m88k/xm-dgux.h
new file mode 100644
index 0000000..b3608e7
--- /dev/null
+++ b/gdb/config/m88k/xm-dgux.h
@@ -0,0 +1,58 @@
+/* Host-machine dependent parameters for Motorola 88000, for GDB.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "m88k/xm-m88k.h"
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#if !defined (USG)
+#define USG 1
+#endif
+
+#include <sys/param.h>
+
+#ifdef __GNUC__
+#define memcpy __builtin_memcpy
+/* gcc doesn't have this, at least not gcc 1.92.  */
+/* #define memset __builtin_memset */
+#define strcmp __builtin_strcmp
+#endif
+
+#define x_foff _x_x._x_offset
+#define x_fname _x_name
+#define USER ptrace_user
+#define _BSD_WAIT_FLAVOR
+
+#define HAVE_TERMIO
+
+#ifndef USIZE
+#define USIZE 2048
+#endif
+#define NBPG NBPC
+#define UPAGES USIZE
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+/* Since registers r0 through r31 are stored directly in the struct ptrace_user,
+   (for m88k BCS)
+   the ptrace_user offsets are sufficient and KERNEL_U_ADDRESS can be 0 */
+
+#define KERNEL_U_ADDR 0
diff --git a/gdb/config/m88k/xm-m88k.h b/gdb/config/m88k/xm-m88k.h
new file mode 100644
index 0000000..35620a0
--- /dev/null
+++ b/gdb/config/m88k/xm-m88k.h
@@ -0,0 +1,20 @@
+/* Host-machine dependent parameters for Motorola 88000, for GDB.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
diff --git a/gdb/config/mips/bigmips.mt b/gdb/config/mips/bigmips.mt
new file mode 100644
index 0000000..38f03f2
--- /dev/null
+++ b/gdb/config/mips/bigmips.mt
@@ -0,0 +1,3 @@
+# Target: Big-endian MIPS machine such as Sony News
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-bigmips.h
diff --git a/gdb/config/mips/bigmips64.mt b/gdb/config/mips/bigmips64.mt
new file mode 100644
index 0000000..fcb7b21
--- /dev/null
+++ b/gdb/config/mips/bigmips64.mt
@@ -0,0 +1,3 @@
+# Target: Big-endian MIPS machine such as Sony News
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-bigmips64.h
diff --git a/gdb/config/mips/decstation.mh b/gdb/config/mips/decstation.mh
new file mode 100644
index 0000000..da417b2
--- /dev/null
+++ b/gdb/config/mips/decstation.mh
@@ -0,0 +1,5 @@
+# Host: Little-endian MIPS machine such as DECstation.
+XDEPFILES= 
+XM_FILE= xm-mips.h
+NAT_FILE= nm-mips.h
+NATDEPFILES= infptrace.o inftarg.o corelow.o mips-nat.o fork-child.o
diff --git a/gdb/config/mips/decstation.mt b/gdb/config/mips/decstation.mt
new file mode 100644
index 0000000..1984722
--- /dev/null
+++ b/gdb/config/mips/decstation.mt
@@ -0,0 +1,3 @@
+# Target: Little-endian MIPS machine such as DECstation.
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-mips.h
diff --git a/gdb/config/mips/embed.mt b/gdb/config/mips/embed.mt
new file mode 100644
index 0000000..42ab4aa
--- /dev/null
+++ b/gdb/config/mips/embed.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o remote-array.o
+TM_FILE= tm-embed.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/embed64.mt b/gdb/config/mips/embed64.mt
new file mode 100644
index 0000000..ed60fd2
--- /dev/null
+++ b/gdb/config/mips/embed64.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o remote-array.o
+TM_FILE= tm-embed64.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/embedl.mt b/gdb/config/mips/embedl.mt
new file mode 100644
index 0000000..0ed8b8d
--- /dev/null
+++ b/gdb/config/mips/embedl.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o remote-array.o
+TM_FILE= tm-embedl.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/embedl64.mt b/gdb/config/mips/embedl64.mt
new file mode 100644
index 0000000..28c41be
--- /dev/null
+++ b/gdb/config/mips/embedl64.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o remote-array.o
+TM_FILE= tm-embedl64.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/irix3.mh b/gdb/config/mips/irix3.mh
new file mode 100644
index 0000000..311d697
--- /dev/null
+++ b/gdb/config/mips/irix3.mh
@@ -0,0 +1,6 @@
+# Host: SGI Iris running irix 3.x
+XDEPFILES= 
+XM_FILE= xm-irix3.h
+NAT_FILE= nm-irix3.h
+NATDEPFILES= fork-child.o corelow.o infptrace.o inftarg.o mips-nat.o
+XM_CLIBS=-lbsd
diff --git a/gdb/config/mips/irix3.mt b/gdb/config/mips/irix3.mt
new file mode 100644
index 0000000..b3fa4dd
--- /dev/null
+++ b/gdb/config/mips/irix3.mt
@@ -0,0 +1,3 @@
+# Target: MIPS SGI running Irix 3
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-irix3.h
diff --git a/gdb/config/mips/irix4.mh b/gdb/config/mips/irix4.mh
new file mode 100644
index 0000000..68511e6
--- /dev/null
+++ b/gdb/config/mips/irix4.mh
@@ -0,0 +1,8 @@
+# Host: SGI Iris running irix 4.x
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-irix4.h
+NAT_FILE= nm-irix4.h
+NATDEPFILES= fork-child.o procfs.o irix4-nat.o corelow.o
+XM_CLIBS=-lbsd -lsun
+# use cc in K&R mode, bump up some static compiler tables.
+CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh1100
diff --git a/gdb/config/mips/irix5.mh b/gdb/config/mips/irix5.mh
new file mode 100644
index 0000000..0e27686
--- /dev/null
+++ b/gdb/config/mips/irix5.mh
@@ -0,0 +1,6 @@
+# Host: SGI Iris running irix 5.x
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-irix5.h
+NAT_FILE= nm-irix5.h
+NATDEPFILES= fork-child.o procfs.o irix5-nat.o corelow.o
+XM_CLIBS=-lbsd -lsun
diff --git a/gdb/config/mips/irix5.mt b/gdb/config/mips/irix5.mt
new file mode 100644
index 0000000..5b17bcd
--- /dev/null
+++ b/gdb/config/mips/irix5.mt
@@ -0,0 +1,3 @@
+# Target: MIPS SGI running Irix 5
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-irix5.h
diff --git a/gdb/config/mips/littlemips.mh b/gdb/config/mips/littlemips.mh
new file mode 100644
index 0000000..103919d
--- /dev/null
+++ b/gdb/config/mips/littlemips.mh
@@ -0,0 +1,3 @@
+# Host: Little-endian MIPS machine such as DECstation.
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+XM_FILE= xm-mips.h
diff --git a/gdb/config/mips/littlemips.mt b/gdb/config/mips/littlemips.mt
new file mode 100644
index 0000000..1984722
--- /dev/null
+++ b/gdb/config/mips/littlemips.mt
@@ -0,0 +1,3 @@
+# Target: Little-endian MIPS machine such as DECstation.
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-mips.h
diff --git a/gdb/config/mips/mipsm3.mh b/gdb/config/mips/mipsm3.mh
new file mode 100644
index 0000000..e049d68
--- /dev/null
+++ b/gdb/config/mips/mipsm3.mh
@@ -0,0 +1,7 @@
+# Host: Little endian MIPS machine such as pmax
+# running Mach 3.0 operating system
+
+XDEPFILES= core-aout.o
+NATDEPFILES= mipsm3-nat.o m3-nat.o
+XM_FILE= xm-mipsm3.h
+NAT_FILE= ../nm-m3.h
diff --git a/gdb/config/mips/mipsm3.mt b/gdb/config/mips/mipsm3.mt
new file mode 100644
index 0000000..66856d1
--- /dev/null
+++ b/gdb/config/mips/mipsm3.mt
@@ -0,0 +1,4 @@
+# Target: Little-endian MIPS machine such as pmax
+# running Mach 3.0 operating system
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-mipsm3.h
diff --git a/gdb/config/mips/mipsv4.mh b/gdb/config/mips/mipsv4.mh
new file mode 100644
index 0000000..87cb7e4
--- /dev/null
+++ b/gdb/config/mips/mipsv4.mh
@@ -0,0 +1,4 @@
+# Host: Mips running SVR4
+XM_FILE= xm-mipsv4.h
+NAT_FILE= ../nm-sysv4.h
+NATDEPFILES= fork-child.o procfs.o mipsv4-nat.o corelow.o core-regset.o solib.o
diff --git a/gdb/config/mips/mipsv4.mt b/gdb/config/mips/mipsv4.mt
new file mode 100644
index 0000000..6d3b47d
--- /dev/null
+++ b/gdb/config/mips/mipsv4.mt
@@ -0,0 +1,3 @@
+# Target: MIPS running SVR4
+TDEPFILES= mips-tdep.o
+TM_FILE= tm-mipsv4.h
diff --git a/gdb/config/mips/news-mips.mh b/gdb/config/mips/news-mips.mh
new file mode 100644
index 0000000..620fbaa
--- /dev/null
+++ b/gdb/config/mips/news-mips.mh
@@ -0,0 +1,4 @@
+# Host: Big-endian MIPS machine such as Sony News
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o mips-nat.o
+XM_FILE= xm-news-mips.h
+NAT_FILE= nm-news-mips.h
diff --git a/gdb/config/mips/nm-irix3.h b/gdb/config/mips/nm-irix3.h
new file mode 100644
index 0000000..3f4b064
--- /dev/null
+++ b/gdb/config/mips/nm-irix3.h
@@ -0,0 +1,37 @@
+/* Definitions for SGI irix3 native support.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Don't need special routines for Irix v3 -- we can use infptrace.c */
+#undef FETCH_INFERIOR_REGISTERS
+
+#define U_REGS_OFFSET 0
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   argument regs.  a0 (CALL_ARG0) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
+
+/* Is this really true or is this just a leftover from a DECstation
+   config file?  */
+
+#define	ONE_PROCESS_WRITETEXT
diff --git a/gdb/config/mips/nm-irix4.h b/gdb/config/mips/nm-irix4.h
new file mode 100644
index 0000000..017695c
--- /dev/null
+++ b/gdb/config/mips/nm-irix4.h
@@ -0,0 +1,61 @@
+/* Definitions for native support of irix4.
+
+Copyright (C) 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Let's use /debug instead of all this dangerous mucking about
+ * with ptrace(), which seems *extremely* fragile, anyway.
+ */
+#define USE_PROC_FS
+#define CTL_PROC_NAME_FMT "/debug/%d"
+#define AS_PROC_NAME_FMT "/debug/%d"
+#define MAP_PROC_NAME_FMT "/debug/%d"
+#define STATUS_PROC_NAME_FMT "/debug/%d"
+
+/* Don't need special routines for the SGI -- we can use infptrace.c */
+#undef FETCH_INFERIOR_REGISTERS
+
+#define U_REGS_OFFSET 0
+
+/* Is this really true or is this just a leftover from a DECstation
+   config file?  */
+
+#define	ONE_PROCESS_WRITETEXT
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* Temporary new watchpoint stuff */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+	((type) == bp_hardware_watchpoint)
+
+/* When a hardware watchpoint fires off the PC will be left at the
+   instruction which caused the watchpoint.  It will be necessary for
+   GDB to step over the watchpoint. */
+
+#define STOPPED_BY_WATCHPOINT(W) \
+  procfs_stopped_by_watchpoint(inferior_pid)
+extern int procfs_stopped_by_watchpoint PARAMS ((int));
+
+#define HAVE_NONSTEPPABLE_WATCHPOINT
+
+/* Use these macros for watchpoint insertion/deletion.  */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+#define target_insert_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, len, 2)
+#define target_remove_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, 0, 0)
+extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int));
diff --git a/gdb/config/mips/nm-irix5.h b/gdb/config/mips/nm-irix5.h
new file mode 100644
index 0000000..90d454b
--- /dev/null
+++ b/gdb/config/mips/nm-irix5.h
@@ -0,0 +1,44 @@
+/* Definitions for native support of irix5.
+
+Copyright (C) 1993, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-sysv4.h"
+#undef IN_SOLIB_DYNSYM_RESOLVE_CODE
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* Temporary new watchpoint stuff */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+	((type) == bp_hardware_watchpoint)
+
+/* When a hardware watchpoint fires off the PC will be left at the
+   instruction which caused the watchpoint.  It will be necessary for
+   GDB to step over the watchpoint. */
+
+#define STOPPED_BY_WATCHPOINT(W) \
+  procfs_stopped_by_watchpoint(inferior_pid)
+extern int procfs_stopped_by_watchpoint PARAMS ((int));
+
+#define HAVE_NONSTEPPABLE_WATCHPOINT
+
+/* Use these macros for watchpoint insertion/deletion.  */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+#define target_insert_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, len, 2)
+#define target_remove_watchpoint(addr, len, type) procfs_set_watchpoint (inferior_pid, addr, 0, 0)
+extern int procfs_set_watchpoint PARAMS ((int, CORE_ADDR, int, int));
diff --git a/gdb/config/mips/nm-mips.h b/gdb/config/mips/nm-mips.h
new file mode 100644
index 0000000..6418b86
--- /dev/null
+++ b/gdb/config/mips/nm-mips.h
@@ -0,0 +1,32 @@
+/* Native definitions for GDB on DECstations, Sony News. and MIPS Riscos systems
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+   Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin(af@cs.cmu.edu) at CMU
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   argument regs.  a0 (CALL_ARG0) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+extern int get_longjmp_target PARAMS ((CORE_ADDR *));
diff --git a/gdb/config/mips/nm-news-mips.h b/gdb/config/mips/nm-news-mips.h
new file mode 100644
index 0000000..1ab63ba
--- /dev/null
+++ b/gdb/config/mips/nm-news-mips.h
@@ -0,0 +1,42 @@
+/* Definitions to make GDB run on a mips box under 4.3bsd.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+   Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin(af@cs.cmu.edu) at CMU
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_NEWS_MIPS_H
+#define NM_NEWS_MIPS_H 1
+
+/* Needed for RISC NEWS core files.  */
+#include <machine/machparam.h>
+#include <sys/types.h>
+#define KERNEL_U_ADDR UADDR
+
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+	if (regno < 38) addr = (NBPG*UPAGES) + (regno - 38)*sizeof(int);\
+	else addr = 0; /* ..somewhere in the pcb */
+
+/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
+#define	ONE_PROCESS_WRITETEXT
+
+#include "mips/nm-mips.h"
+
+/* Apparently not in <sys/types.h> */
+typedef int pid_t;
+
+#endif	/* NM_NEWS_MIPS_H */
diff --git a/gdb/config/mips/nm-riscos.h b/gdb/config/mips/nm-riscos.h
new file mode 100644
index 0000000..2d54345
--- /dev/null
+++ b/gdb/config/mips/nm-riscos.h
@@ -0,0 +1,59 @@
+/* This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* MIPS running RISC/os 4.52C.  */
+
+#define PCB_OFFSET(FIELD) ((int)&((struct user*)0)->u_pcb.FIELD)
+
+/* RISC/os 5.0 defines this in machparam.h.  */
+#include <bsd43/machine/machparam.h>
+#define NBPG BSD43_NBPG
+#define UPAGES BSD43_UPAGES
+
+/* Where is this used?  I don't see any uses in mips-nat.c, and I don't think
+   the uses in infptrace.c are used if FETCH_INFERIOR_REGISTERS is defined.
+   Does the compiler react badly to "extern CORE_ADDR kernel_u_addr" (even
+   if never referenced)?  */
+#define KERNEL_U_ADDR BSD43_UADDR
+
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+	      if (regno < FP0_REGNUM) \
+		  addr =  UPAGES*NBPG-EF_SIZE+4*((regno)+EF_AT-1); \
+	      else if (regno < PC_REGNUM) \
+		  addr = PCB_OFFSET(pcb_fpregs[0]) + 4*(regno-FP0_REGNUM); \
+              else if (regno == PS_REGNUM) \
+                  addr = UPAGES*NBPG-EF_SIZE+4*EF_SR; \
+              else if (regno == BADVADDR_REGNUM) \
+  		  addr = UPAGES*NBPG-EF_SIZE+4*EF_BADVADDR; \
+	      else if (regno == LO_REGNUM) \
+		  addr = UPAGES*NBPG-EF_SIZE+4*EF_MDLO; \
+	      else if (regno == HI_REGNUM) \
+		  addr = UPAGES*NBPG-EF_SIZE+4*EF_MDHI; \
+	      else if (regno == CAUSE_REGNUM) \
+		  addr = UPAGES*NBPG-EF_SIZE+4*EF_CAUSE; \
+	      else if (regno == PC_REGNUM) \
+		  addr = UPAGES*NBPG-EF_SIZE+4*EF_EPC; \
+              else if (regno < FCRCS_REGNUM) \
+		  addr = PCB_OFFSET(pcb_fpregs[0]) + 4*(regno-FP0_REGNUM); \
+	      else if (regno == FCRCS_REGNUM) \
+		  addr = PCB_OFFSET(pcb_fpc_csr); \
+	      else if (regno == FCRIR_REGNUM) \
+		  addr = PCB_OFFSET(pcb_fpc_eir); \
+              else \
+                  addr = 0;
+
+#include "mips/nm-mips.h"
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
diff --git a/gdb/config/mips/riscos.mh b/gdb/config/mips/riscos.mh
new file mode 100644
index 0000000..6a3192f
--- /dev/null
+++ b/gdb/config/mips/riscos.mh
@@ -0,0 +1,16 @@
+# Host: MIPS running RISC/os
+
+XM_FILE= xm-riscos.h
+
+NAT_FILE= nm-riscos.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o mips-nat.o
+
+MH_CFLAGS=-Wf,-XNh10000
+
+# ptrace(2) apparently has problems in the BSD environment.  No workaround is
+# known except to select the sysv environment.  Could we use /proc instead?
+# These "sysv environments" and "bsd environments" often end up being a pain.
+#
+# This is not part of CFLAGS because perhaps not all C compilers have this
+# option.
+CC= cc -systype sysv
diff --git a/gdb/config/mips/tm-bigmips.h b/gdb/config/mips/tm-bigmips.h
new file mode 100644
index 0000000..271ceb0
--- /dev/null
+++ b/gdb/config/mips/tm-bigmips.h
@@ -0,0 +1,21 @@
+/* Copyright (C) 1990 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
+
+#include "mips/tm-mips.h"
diff --git a/gdb/config/mips/tm-bigmips64.h b/gdb/config/mips/tm-bigmips64.h
new file mode 100644
index 0000000..8b255a5
--- /dev/null
+++ b/gdb/config/mips/tm-bigmips64.h
@@ -0,0 +1,23 @@
+/* Target machine parameters for MIPS r4000
+   Copyright 1994 Free Software Foundation, Inc.
+   Contributed by Ian Lance Taylor (ian@cygnus.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
+
+#include "mips/tm-mips64.h"
diff --git a/gdb/config/mips/tm-embed.h b/gdb/config/mips/tm-embed.h
new file mode 100644
index 0000000..7bf1759
--- /dev/null
+++ b/gdb/config/mips/tm-embed.h
@@ -0,0 +1,49 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+
+#include "mips/tm-bigmips.h"
+
+#undef DEFAULT_MIPS_TYPE
+#define DEFAULT_MIPS_TYPE "r3051"
+
+/* Watchpoint support */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* Use these macros for watchpoint insertion/deletion.  */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+
+#define target_insert_watchpoint(addr, len, type) \
+	remote_mips_set_watchpoint (addr, len, type)
+int remote_mips_set_watchpoint PARAMS ((CORE_ADDR addr, int len, int type));
+
+#define target_remove_watchpoint(addr, len, type) \
+	remote_mips_remove_watchpoint (addr, len, type)
+int remote_mips_remove_watchpoint PARAMS ((CORE_ADDR addr, int len, int type));
+
+/* We need to remove watchpoints when stepping, else we hit them again! */
+
+#define HAVE_NONSTEPPABLE_WATCHPOINT
+
+#define STOPPED_BY_WATCHPOINT(w) remote_mips_stopped_by_watchpoint ()
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+  remote_mips_can_use_hardware_watchpoint(cnt)
+int remote_mips_can_use_hardware_watchpoint PARAMS ((int cnt));
diff --git a/gdb/config/mips/tm-embed64.h b/gdb/config/mips/tm-embed64.h
new file mode 100644
index 0000000..df90f58
--- /dev/null
+++ b/gdb/config/mips/tm-embed64.h
@@ -0,0 +1,21 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+
+#include "mips/tm-bigmips64.h"
diff --git a/gdb/config/mips/tm-embedl.h b/gdb/config/mips/tm-embedl.h
new file mode 100644
index 0000000..23abcd9
--- /dev/null
+++ b/gdb/config/mips/tm-embedl.h
@@ -0,0 +1,21 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+
+#include "mips/tm-mips.h"
diff --git a/gdb/config/mips/tm-embedl64.h b/gdb/config/mips/tm-embedl64.h
new file mode 100644
index 0000000..c7dca19
--- /dev/null
+++ b/gdb/config/mips/tm-embedl64.h
@@ -0,0 +1,21 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+
+#include "mips/tm-mips64.h"
diff --git a/gdb/config/mips/tm-irix3.h b/gdb/config/mips/tm-irix3.h
new file mode 100644
index 0000000..7e8e53e
--- /dev/null
+++ b/gdb/config/mips/tm-irix3.h
@@ -0,0 +1,81 @@
+/* Target machine description for SGI Iris under Irix, for GDB.
+   Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "mips/tm-bigmips.h"
+
+/* SGI's assembler doesn't grok dollar signs in identifiers.
+   So we use dots instead.  This item must be coordinated with G++. */
+#undef CPLUS_MARKER
+#define CPLUS_MARKER '.'
+
+/* Redefine register numbers for SGI. */
+
+#undef NUM_REGS
+#undef REGISTER_NAMES
+#undef FP0_REGNUM
+#undef PC_REGNUM
+#undef PS_REGNUM
+#undef HI_REGNUM
+#undef LO_REGNUM
+#undef CAUSE_REGNUM
+#undef BADVADDR_REGNUM
+#undef FCRCS_REGNUM
+#undef FCRIR_REGNUM
+
+/* Number of machine registers */
+
+#define NUM_REGS 71
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES 	\
+    {	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3", \
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7", \
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7", \
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"fp",	"ra", \
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7", \
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15", \
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",\
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",\
+	"pc",	"cause", "bad",	"hi",	"lo",	"fsr",  "fir" \
+    }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define FP0_REGNUM 32		/* Floating point register 0 (single float) */
+#define PC_REGNUM 64		/* Contains program counter */
+#define CAUSE_REGNUM 65		/* describes last exception */
+#define BADVADDR_REGNUM 66	/* bad vaddr for addressing exception */
+#define HI_REGNUM 67		/* Multiple/divide temp */
+#define LO_REGNUM 68		/* ... */
+#define FCRCS_REGNUM 69		/* FP control/status */
+#define FCRIR_REGNUM 70		/* FP implementation/revision */
+
+/* Offsets for register values in _sigtramp frame.
+   sigcontext is immediately above the _sigtramp frame on Irix.  */
+#define SIGFRAME_BASE		0x0 
+#define SIGFRAME_PC_OFF		(SIGFRAME_BASE + 2 * 4)
+#define SIGFRAME_REGSAVE_OFF	(SIGFRAME_BASE + 3 * 4)
+#define SIGFRAME_FPREGSAVE_OFF	(SIGFRAME_BASE + 3 * 4 + 32 * 4 + 4)
diff --git a/gdb/config/mips/tm-irix5.h b/gdb/config/mips/tm-irix5.h
new file mode 100644
index 0000000..ad98e88
--- /dev/null
+++ b/gdb/config/mips/tm-irix5.h
@@ -0,0 +1,75 @@
+/* Target machine description for SGI Iris under Irix 5, for GDB.
+   Copyright 1990, 1991, 1992, 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "mips/tm-irix3.h"
+
+#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32
+/*
+ * Irix 6 (n32 ABI) has 32-bit GP regs and 64-bit FP regs
+ */
+
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES (MIPS_NUMREGS * 8 + (NUM_REGS - MIPS_NUMREGS) * MIPS_REGSIZE)
+
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) \
+     (((N) < FP0_REGNUM) ? (N) * MIPS_REGSIZE : \
+      ((N) < FP0_REGNUM + 32) ?     \
+      FP0_REGNUM * MIPS_REGSIZE + \
+      ((N) - FP0_REGNUM) * sizeof(double) : \
+      32 * sizeof(double) + ((N) - 32) * MIPS_REGSIZE)
+
+#undef  REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+	(((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_double \
+	 : ((N) == 32 /*SR*/) ? builtin_type_uint32 \
+	 : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \
+	 : builtin_type_int)
+
+#undef  MIPS_LAST_ARG_REGNUM
+#define MIPS_LAST_ARG_REGNUM 11  /* N32 uses R4 through R11 for args */
+
+#undef  MIPS_NUM_ARG_REGS
+#define MIPS_NUM_ARG_REGS 8
+
+#endif /* N32 */
+
+/* When calling functions on Irix 5 (or any MIPS SVR4 ABI compliant
+   platform) $25 must hold the function address.  Dest_Reg is a macro
+   used in CALL_DUMMY in tm-mips.h.  */
+#undef Dest_Reg
+#define Dest_Reg 25
+
+/* The signal handler trampoline is called _sigtramp.  */
+#undef IN_SIGTRAMP
+#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigtramp", name))
+
+/* Irix 5 saves a full 64 bits for each register.  We skip 2 * 4 to
+   get to the saved PC (the register mask and status register are both
+   32 bits) and then another 4 to get to the lower 32 bits.  We skip
+   the same 4 bytes, plus the 8 bytes for the PC to get to the
+   registers, and add another 4 to get to the lower 32 bits.  We skip
+   8 bytes per register.  */
+#undef SIGFRAME_PC_OFF
+#define SIGFRAME_PC_OFF		(SIGFRAME_BASE + 2 * 4 + 4)
+#undef SIGFRAME_REGSAVE_OFF
+#define SIGFRAME_REGSAVE_OFF	(SIGFRAME_BASE + 2 * 4 + 8 + 4)
+#undef SIGFRAME_FPREGSAVE_OFF
+#define SIGFRAME_FPREGSAVE_OFF	(SIGFRAME_BASE + 2 * 4 + 8 + 32 * 8 + 4)
+#define SIGFRAME_REG_SIZE	8
diff --git a/gdb/config/mips/tm-mips.h b/gdb/config/mips/tm-mips.h
new file mode 100644
index 0000000..6a7091a
--- /dev/null
+++ b/gdb/config/mips/tm-mips.h
@@ -0,0 +1,560 @@
+/* Definitions to make GDB run on a mips box under 4.3bsd.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995
+   Free Software Foundation, Inc.
+   Contributed by Per Bothner (bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin (af@cs.cmu.edu) at CMU..
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_MIPS_H
+#define TM_MIPS_H 1
+
+#ifdef __STDC__
+struct frame_info;
+struct symbol;
+struct type;
+struct value;
+#endif
+
+#include <bfd.h>
+#include "coff/sym.h"		/* Needed for PDR below.  */
+#include "coff/symconst.h"
+
+#if !defined (TARGET_BYTE_ORDER_DEFAULT)
+#define TARGET_BYTE_ORDER_DEFAULT LITTLE_ENDIAN
+#endif
+
+#if !defined (GDB_TARGET_IS_MIPS64)
+#define GDB_TARGET_IS_MIPS64 0
+#endif
+
+#if !defined (MIPS_EABI)
+#define MIPS_EABI 0
+#endif
+
+#if !defined (TARGET_MONITOR_PROMPT)
+#define TARGET_MONITOR_PROMPT "<IDT>"
+#endif
+
+/* PC should be masked to remove possible MIPS16 flag */
+#if !defined (GDB_TARGET_MASK_DISAS_PC)
+#define GDB_TARGET_MASK_DISAS_PC(addr) UNMAKE_MIPS16_ADDR(addr)
+#endif
+#if !defined (GDB_TARGET_UNMASK_DISAS_PC)
+#define GDB_TARGET_UNMASK_DISAS_PC(addr) MAKE_MIPS16_ADDR(addr)
+#endif
+
+/* Floating point is IEEE compliant */
+#define IEEE_FLOAT
+
+/* The name of the usual type of MIPS processor that is in the target
+   system.  */
+
+#define DEFAULT_MIPS_TYPE "generic"
+
+/* Remove useless bits from an instruction address.  */
+
+#define ADDR_BITS_REMOVE(addr) mips_addr_bits_remove(addr)
+CORE_ADDR mips_addr_bits_remove PARAMS ((CORE_ADDR addr));
+
+/* Remove useless bits from the stack pointer.  */
+
+#define TARGET_READ_SP() ADDR_BITS_REMOVE (read_register (SP_REGNUM))
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)	pc = mips_skip_prologue (pc, 0)
+extern CORE_ADDR mips_skip_prologue PARAMS ((CORE_ADDR addr, int lenient));
+
+/* Return non-zero if PC points to an instruction which will cause a step
+   to execute both the instruction at PC and an instruction at PC+4.  */
+extern int mips_step_skips_delay PARAMS ((CORE_ADDR));
+#define STEP_SKIPS_DELAY_P (1)
+#define STEP_SKIPS_DELAY(pc) (mips_step_skips_delay (pc))
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame)	read_register(RA_REGNUM)
+
+/* Are we currently handling a signal */
+
+extern int in_sigtramp PARAMS ((CORE_ADDR, char *));
+#define IN_SIGTRAMP(pc, name)	in_sigtramp(pc, name)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define BIG_ENDIAN 4321
+
+/* BREAKPOINT_FROM_PC uses the program counter value to determine whether a
+   16- or 32-bit breakpoint should be used.  It returns a pointer
+   to a string of bytes that encode a breakpoint instruction, stores
+   the length of the string to *lenptr, and adjusts the pc (if necessary) to
+   point to the actual memory location where the breakpoint should be
+   inserted.  */
+
+extern breakpoint_from_pc_fn mips_breakpoint_from_pc;
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) mips_breakpoint_from_pc(pcptr, lenptr)
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* The size of a register.  This is predefined in tm-mips64.h.  We
+   can't use REGISTER_SIZE because that is used for various other
+   things.  */
+
+#ifndef MIPS_REGSIZE
+#define MIPS_REGSIZE 4
+#endif
+
+/* The sizes of floating point registers.  */
+
+#define MIPS_FPU_SINGLE_REGSIZE 4
+#define MIPS_FPU_DOUBLE_REGSIZE 8
+
+/* Number of machine registers */
+
+#ifndef NUM_REGS
+#define NUM_REGS 90
+#endif
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#ifndef REGISTER_NAMES
+#define REGISTER_NAMES 	\
+    {	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3", \
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7", \
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7", \
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra", \
+	"sr",	"lo",	"hi",	"bad",	"cause","pc",    \
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7", \
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15", \
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",\
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",\
+	"fsr",  "fir",  "fp",	"", \
+	"",	"",	"",	"",	"",	"",	"",	"", \
+	"",	"",	"",	"",	"",	"",	"",	"", \
+    }
+#endif
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define ZERO_REGNUM 0		/* read-only register, always 0 */
+#define V0_REGNUM 2		/* Function integer return value */
+#define A0_REGNUM 4		/* Loc of first arg during a subr call */
+#if MIPS_EABI
+#  define MIPS_LAST_ARG_REGNUM 11 /* EABI uses R4 through R11 for args */
+#  define MIPS_NUM_ARG_REGS 8
+#else
+#  define MIPS_LAST_ARG_REGNUM 7  /* old ABI uses R4 through R7 for args */
+#  define MIPS_NUM_ARG_REGS 4
+#endif
+#define T9_REGNUM 25		/* Contains address of callee in PIC */
+#define SP_REGNUM 29		/* Contains address of top of stack */
+#define RA_REGNUM 31		/* Contains return address value */
+#define PS_REGNUM 32		/* Contains processor status */
+#define HI_REGNUM 34            /* Multiple/divide temp */
+#define LO_REGNUM 33            /* ... */
+#define BADVADDR_REGNUM 35	/* bad vaddr for addressing exception */
+#define CAUSE_REGNUM 36		/* describes last exception */
+#define PC_REGNUM 37		/* Contains program counter */
+#define FP0_REGNUM 38           /* Floating point register 0 (single float) */
+#define FPA0_REGNUM (FP0_REGNUM+12) /* First float argument register */
+#if MIPS_EABI			/* EABI uses F12 through F19 for args */
+#  define MIPS_LAST_FP_ARG_REGNUM (FP0_REGNUM+19)
+#  define MIPS_NUM_FP_ARG_REGS 8
+#else				/* old ABI uses F12 through F15 for args */
+#  define MIPS_LAST_FP_ARG_REGNUM (FP0_REGNUM+15)
+#  define MIPS_NUM_FP_ARG_REGS 4
+#endif
+#define FCRCS_REGNUM 70         /* FP control/status */
+#define FCRIR_REGNUM 71         /* FP implementation/revision */
+#define FP_REGNUM 72		/* Pseudo register that contains true address of executing stack frame */
+#define	UNUSED_REGNUM 73	/* Never used, FIXME */
+#define	FIRST_EMBED_REGNUM 74	/* First CP0 register for embedded use */
+#define	PRID_REGNUM 89		/* Processor ID */
+#define	LAST_EMBED_REGNUM 89	/* Last one */
+
+/* Define DO_REGISTERS_INFO() to do machine-specific formatting
+   of register dumps. */
+
+#define DO_REGISTERS_INFO(_regnum, fp) mips_do_registers_info(_regnum, fp)
+extern void mips_do_registers_info PARAMS ((int, int));
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+
+#define REGISTER_BYTES (NUM_REGS*MIPS_REGSIZE)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) * MIPS_REGSIZE)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N. */
+
+#define REGISTER_RAW_SIZE(N) REGISTER_VIRTUAL_SIZE(N)
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (N))
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type of data in
+   register N.  */
+
+#ifndef REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+	(((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_float \
+	 : ((N) == 32 /*SR*/) ? builtin_type_uint32 \
+	 : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \
+	 : builtin_type_int)
+#endif
+
+/* All mips targets store doubles in a register pair with the least
+   significant register in the lower numbered register.
+   If the target is big endian, double register values need conversion
+   between memory and register formats.  */
+
+#define REGISTER_CONVERT_TO_TYPE(n, type, buffer)			\
+  do {if (TARGET_BYTE_ORDER == BIG_ENDIAN				\
+	  && REGISTER_RAW_SIZE (n) == 4					\
+	  && (n) >= FP0_REGNUM && (n) < FP0_REGNUM + 32			\
+	  && TYPE_CODE(type) == TYPE_CODE_FLT				\
+	  && TYPE_LENGTH(type) == 8) {					\
+        char __temp[4];							\
+	memcpy (__temp, ((char *)(buffer))+4, 4);			\
+	memcpy (((char *)(buffer))+4, (buffer), 4); 			\
+	memcpy (((char *)(buffer)), __temp, 4); }} while (0)
+
+#define REGISTER_CONVERT_FROM_TYPE(n, type, buffer)			\
+  do {if (TARGET_BYTE_ORDER == BIG_ENDIAN				\
+	  && REGISTER_RAW_SIZE (n) == 4					\
+	  && (n) >= FP0_REGNUM && (n) < FP0_REGNUM + 32			\
+	  && TYPE_CODE(type) == TYPE_CODE_FLT				\
+	  && TYPE_LENGTH(type) == 8) {					\
+        char __temp[4];							\
+	memcpy (__temp, ((char *)(buffer))+4, 4);			\
+	memcpy (((char *)(buffer))+4, (buffer), 4); 			\
+	memcpy (((char *)(buffer)), __temp, 4); }} while (0)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  Handled by mips_push_arguments.  */
+
+#define STORE_STRUCT_RETURN(addr, sp)	/**/
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  XXX floats */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  mips_extract_return_value(TYPE, REGBUF, VALBUF)
+extern void
+mips_extract_return_value PARAMS ((struct type *, char [], char *));
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  mips_store_return_value(TYPE, VALBUF)
+extern void mips_store_return_value PARAMS ((struct type *, char *));
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+/* The address is passed in a0 upon entry to the function, but when
+   the function exits, the compiler has copied the value to v0.  This
+   convention is specified by the System V ABI, so I think we can rely
+   on it.  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  (extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \
+		    REGISTER_RAW_SIZE (V0_REGNUM)))
+
+extern use_struct_convention_fn mips_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) mips_use_struct_convention (gcc_p, type)
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+#define FRAME_CHAIN(thisframe) (CORE_ADDR) mips_frame_chain (thisframe)
+extern CORE_ADDR mips_frame_chain PARAMS ((struct frame_info *));
+
+/* Define other aspects of the stack frame.  */
+
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+/* We handle this differently for mips, and maybe we should not */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS)  {(FRAMELESS) = 0;}
+
+/* Saved Pc.  */
+
+#define FRAME_SAVED_PC(FRAME)	(mips_frame_saved_pc(FRAME))
+extern CORE_ADDR mips_frame_saved_pc PARAMS ((struct frame_info *));
+
+#define FRAME_ARGS_ADDRESS(fi)	(fi)->frame
+
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(num, fi)	(num = mips_frame_num_args(fi))
+extern int mips_frame_num_args PARAMS ((struct frame_info *));
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_INIT_SAVED_REGS(frame_info) \
+  do { \
+    if ((frame_info)->saved_regs == NULL) \
+      mips_find_saved_regs (frame_info); \
+    (frame_info)->saved_regs[SP_REGNUM] = (frame_info)->frame; \
+  } while (0)
+extern void mips_find_saved_regs PARAMS ((struct frame_info *));
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Stack must be aligned on 32-bit boundaries when synthesizing
+   function calls.  We don't need STACK_ALIGN, PUSH_ARGUMENTS will
+   handle it. */
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = mips_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR
+mips_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME 	mips_push_dummy_frame()
+extern void mips_push_dummy_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME		mips_pop_frame()
+extern void mips_pop_frame PARAMS ((void));
+
+#define CALL_DUMMY { 0 }
+
+#define CALL_DUMMY_START_OFFSET (0)
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+
+/* On Irix, $t9 ($25) contains the address of the callee (used for PIC).
+   It doesn't hurt to do this on other systems; $t9 will be ignored.  */
+#define FIX_CALL_DUMMY(dummyname, start_sp, fun, nargs, args, rettype, gcc_p) \
+    write_register(T9_REGNUM, fun)
+
+#define CALL_DUMMY_LOCATION AT_ENTRY_POINT
+
+#define CALL_DUMMY_ADDRESS() (mips_call_dummy_address ())
+extern CORE_ADDR mips_call_dummy_address PARAMS ((void));
+
+/* There's a mess in stack frame creation.  See comments in blockframe.c
+   near reference to INIT_FRAME_PC_FIRST.  */
+
+#define	INIT_FRAME_PC(fromleaf, prev) /* nada */
+
+#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
+   mips_init_frame_pc_first(fromleaf, prev)
+extern void mips_init_frame_pc_first PARAMS ((int, struct frame_info *));
+
+/* Special symbol found in blocks associated with routines.  We can hang
+   mips_extra_func_info_t's off of this.  */
+
+#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
+
+/* Specific information about a procedure.
+   This overlays the MIPS's PDR records, 
+   mipsread.c (ab)uses this to save memory */
+
+typedef struct mips_extra_func_info {
+	long	numargs;	/* number of args to procedure (was iopt) */
+	bfd_vma high_addr;      /* upper address bound */
+	long	frame_adjust;	/* offset of FP from SP (used on MIPS16) */
+	PDR	pdr;		/* Procedure descriptor record */
+} *mips_extra_func_info_t;
+
+#define EXTRA_FRAME_INFO \
+  mips_extra_func_info_t proc_desc; \
+  int num_args;
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) init_extra_frame_info(fci)
+extern void init_extra_frame_info PARAMS ((struct frame_info *));
+
+#define	PRINT_EXTRA_FRAME_INFO(fi) \
+  { \
+    if (fi && fi->proc_desc && fi->proc_desc->pdr.framereg < NUM_REGS) \
+      printf_filtered (" frame pointer is at %s+%d\n", \
+                       REGISTER_NAME (fi->proc_desc->pdr.framereg), \
+                                 fi->proc_desc->pdr.frameoffset); \
+  }
+
+/* It takes two values to specify a frame on the MIPS.
+
+   In fact, the *PC* is the primary value that sets up a frame.  The
+   PC is looked up to see what function it's in; symbol information
+   from that function tells us which register is the frame pointer
+   base, and what offset from there is the "virtual frame pointer".
+   (This is usually an offset from SP.)  On most non-MIPS machines,
+   the primary value is the SP, and the PC, if needed, disambiguates
+   multiple functions with the same SP.  But on the MIPS we can't do
+   that since the PC is not stored in the same part of the frame every
+   time.  This does not seem to be a very clever way to set up frames,
+   but there is nothing we can do about that).  */
+
+#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv)
+extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *));
+
+/* Convert a dbx stab register number (from `r' declaration) to a gdb REGNUM */
+
+#define STAB_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-38)
+
+/* Convert a ecoff register number to a gdb REGNUM */
+
+#define ECOFF_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-32)
+
+/* If the current gcc for for this target does not produce correct debugging
+   information for float parameters, both prototyped and unprototyped, then
+   define this macro.  This forces gdb to  always assume that floats are
+   passed as doubles and then converted in the callee.
+
+   For the mips chip, it appears that the debug info marks the parameters as
+   floats regardless of whether the function is prototyped, but the actual
+   values are passed as doubles for the non-prototyped case and floats for
+   the prototyped case.  Thus we choose to make the non-prototyped case work
+   for C and break the prototyped case, since the non-prototyped case is
+   probably much more common.  (FIXME). */
+
+#define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c)
+
+/* Select the default mips disassembler */
+
+#define TM_PRINT_INSN_MACH 0
+
+
+/* These are defined in mdebugread.c and are used in mips-tdep.c  */
+extern CORE_ADDR sigtramp_address, sigtramp_end;
+extern void fixup_sigtramp PARAMS ((void));
+
+/* Defined in mips-tdep.c and used in remote-mips.c */
+extern char *mips_read_processor_type PARAMS ((void));
+
+/* Functions for dealing with MIPS16 call and return stubs.  */
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name)	mips_in_call_stub (pc, name)
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc, name)	mips_in_return_stub (pc, name)
+#define SKIP_TRAMPOLINE_CODE(pc)		mips_skip_stub (pc)
+#define IGNORE_HELPER_CALL(pc)			mips_ignore_helper (pc)
+extern int mips_in_call_stub PARAMS ((CORE_ADDR pc,  char *name));
+extern int mips_in_return_stub PARAMS ((CORE_ADDR pc,  char *name));
+extern CORE_ADDR mips_skip_stub PARAMS ((CORE_ADDR pc));
+extern int mips_ignore_helper PARAMS ((CORE_ADDR pc));
+
+#ifndef TARGET_MIPS
+#define TARGET_MIPS
+#endif
+
+/* Definitions and declarations used by mips-tdep.c and remote-mips.c  */
+#define MIPS_INSTLEN 4		/* Length of an instruction */
+#define MIPS16_INSTLEN 2	/* Length of an instruction on MIPS16*/
+#define MIPS_NUMREGS 32		/* Number of integer or float registers */
+typedef unsigned long t_inst;	/* Integer big enough to hold an instruction */
+
+/* MIPS16 function addresses are odd (bit 0 is set).  Here are some
+   macros to test, set, or clear bit 0 of addresses.  */
+#define IS_MIPS16_ADDR(addr)	 ((addr) & 1)
+#define MAKE_MIPS16_ADDR(addr)	 ((addr) | 1)
+#define UNMAKE_MIPS16_ADDR(addr) ((addr) & ~1)
+
+#endif	/* TM_MIPS_H */
+
+/* Macros for setting and testing a bit in a minimal symbol that
+   marks it as 16-bit function.  The MSB of the minimal symbol's
+   "info" field is used for this purpose. This field is already
+   being used to store the symbol size, so the assumption is
+   that the symbol size cannot exceed 2^31.
+
+   ELF_MAKE_MSYMBOL_SPECIAL
+			tests whether an ELF symbol is "special", i.e. refers
+			to a 16-bit function, and sets a "special" bit in a 
+			minimal symbol to mark it as a 16-bit function
+   MSYMBOL_IS_SPECIAL	tests the "special" bit in a minimal symbol
+   MSYMBOL_SIZE		returns the size of the minimal symbol, i.e.
+			the "info" field with the "special" bit masked out
+*/
+
+#define ELF_MAKE_MSYMBOL_SPECIAL(sym,msym) \
+ { \
+  if (((elf_symbol_type *)(sym))->internal_elf_sym.st_other == STO_MIPS16) { \
+    MSYMBOL_INFO (msym) = (char *) (((long) MSYMBOL_INFO (msym)) | 0x80000000); \
+    SYMBOL_VALUE_ADDRESS (msym) |= 1; \
+  } \
+ }
+   
+#define MSYMBOL_IS_SPECIAL(msym) \
+  (((long) MSYMBOL_INFO (msym) & 0x80000000) != 0)
+#define MSYMBOL_SIZE(msym) \
+  ((long) MSYMBOL_INFO (msym) & 0x7fffffff)
diff --git a/gdb/config/mips/tm-mips64.h b/gdb/config/mips/tm-mips64.h
new file mode 100644
index 0000000..56a8927
--- /dev/null
+++ b/gdb/config/mips/tm-mips64.h
@@ -0,0 +1,54 @@
+/* Target machine parameters for MIPS r4000
+   Copyright 1994, 1996 Free Software Foundation, Inc.
+   Contributed by Ian Lance Taylor (ian@cygnus.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define GDB_TARGET_IS_MIPS64 1
+
+/* Use eight byte registers.  */
+#define MIPS_REGSIZE 8
+
+/* define 8 byte register type */
+#define REGISTER_VIRTUAL_TYPE(N) \
+        (((N) >= FP0_REGNUM && (N) < FP0_REGNUM+32) ? builtin_type_double \
+	 : ((N) == 32 /*SR*/) ? builtin_type_uint32 \
+	 : ((N) >= 70 && (N) <= 89) ? builtin_type_uint32 \
+	 : builtin_type_long_long)
+
+/* Load double words in CALL_DUMMY.  */
+#define OP_LDFPR 065	/* ldc1 */
+#define OP_LDGPR 067	/* ld */
+
+#if defined(MIPS_EABI) && (MIPS_EABI != 0)
+/* Define sizes for 64-bit data types, allow specific targets to override
+   these values.  Doing so may violate the strict EABI, but it's necessary
+   for some MIPS III and MIPS IV machines that want 64bit longs, but 32bit
+   pointers.  */
+#ifndef TARGET_LONG_BIT
+#define TARGET_LONG_BIT      64
+#endif
+#ifndef TARGET_LONG_LONG_BIT
+#define TARGET_LONG_LONG_BIT 64
+#endif
+#ifndef TARGET_PTR_BIT
+#define TARGET_PTR_BIT       64
+#endif
+#endif /* MIPS_EABI */
+
+/* Get the basic MIPS definitions.  */
+#include "tm-mips.h"
diff --git a/gdb/config/mips/tm-mipsm3.h b/gdb/config/mips/tm-mipsm3.h
new file mode 100644
index 0000000..f736604
--- /dev/null
+++ b/gdb/config/mips/tm-mipsm3.h
@@ -0,0 +1,66 @@
+/* Definitions to make GDB run on a mips box under Mach 3.0
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Mach specific definitions for little endian mips (e.g. pmax)
+ * running Mach 3.0
+ *
+ * Author: Jukka Virtanen <jtv@hut.fi>
+ */
+
+/* Include common definitions for Mach3 systems */
+#include "nm-m3.h"
+
+/* Define offsets to access CPROC stack when it does not have
+ * a kernel thread.
+ */
+
+/* From mk/user/threads/mips/csw.s */
+#define SAVED_FP	(12*4)
+#define SAVED_PC	(13*4)
+#define SAVED_BYTES	(14*4)
+
+/* Using these, define our offsets to items strored in
+ * cproc_switch in csw.s
+ */
+#define MACHINE_CPROC_SP_OFFSET SAVED_BYTES
+#define MACHINE_CPROC_PC_OFFSET SAVED_PC
+#define MACHINE_CPROC_FP_OFFSET SAVED_FP
+
+/* Thread flavors used in setting the Trace state.
+ *
+ * In <mach/machine/thread_status.h>
+ */
+#define TRACE_FLAVOR		MIPS_EXC_STATE
+#define TRACE_FLAVOR_SIZE	MIPS_EXC_STATE_COUNT
+#define TRACE_SET(x,state)	((struct mips_exc_state *)state)->cause = EXC_SST;
+#define TRACE_CLEAR(x,state)	0
+
+/* Mach supports attach/detach */
+#define ATTACH_DETACH 1
+
+#include "mips/tm-mips.h"
+
+/* Address of end of user stack space.
+ * for MACH, see <machine/vmparam.h>
+ */
+#undef  STACK_END_ADDR
+#define STACK_END_ADDR USRSTACK
+
+/* Output registers in tabular format */
+#define TABULAR_REGISTER_OUTPUT
diff --git a/gdb/config/mips/tm-mipsv4.h b/gdb/config/mips/tm-mipsv4.h
new file mode 100644
index 0000000..dd7aaa1
--- /dev/null
+++ b/gdb/config/mips/tm-mipsv4.h
@@ -0,0 +1,45 @@
+/* Target machine description for MIPS running SVR4, for GDB.
+   Copyright 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "mips/tm-bigmips.h"
+#include "tm-sysv4.h"
+
+/* When calling functions on a MIPS SVR4 ABI compliant platform
+   $25 must hold the function address.  Dest_Reg is a macro
+   used in CALL_DUMMY in tm-mips.h.  */
+#undef Dest_Reg
+#define Dest_Reg 25
+
+/* The signal handler trampoline is called _sigtramp.  */
+#undef IN_SIGTRAMP
+#define IN_SIGTRAMP(pc, name) ((name) && STREQ ("_sigtramp", name))
+ 
+/* On entry to the signal handler trampoline, an ucontext is already
+   pushed on the stack. We can get at the saved registers via the
+   mcontext which is contained within the ucontext.  */
+#define SIGFRAME_BASE	0
+#define SIGFRAME_REGSAVE_OFF	(SIGFRAME_BASE + 40)
+#define SIGFRAME_PC_OFF		(SIGFRAME_BASE + 40 + 35 * 4)
+#define SIGFRAME_FPREGSAVE_OFF	(SIGFRAME_BASE + 40 + 36 * 4)
+
+/* Use the alternate method of determining valid frame chains. */
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+/* Convert a DWARF register number to a gdb REGNUM.  */
+#define DWARF_REG_TO_REGNUM(num) ((num) < 32 ? (num) : (num)+FP0_REGNUM-32)
diff --git a/gdb/config/mips/tm-tx39.h b/gdb/config/mips/tm-tx39.h
new file mode 100644
index 0000000..ee99a28
--- /dev/null
+++ b/gdb/config/mips/tm-tx39.h
@@ -0,0 +1,39 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define MIPS_EABI 1
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE
+
+#include "mips/tm-bigmips.h"
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES 	\
+    {	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3", \
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7", \
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7", \
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra", \
+	"sr",	"lo",	"hi",	"bad",	"cause","pc", \
+	"",   	"",   	"",   	"",   	"",   	"",   	"",   	"", \
+	"",   	"",   	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",	"", \
+	"",	"",	"",	"",	"",	"",	"",	"", \
+	"",	"", "config", "cache", "debug", "depc", "epc",	"" \
+    }
diff --git a/gdb/config/mips/tm-tx39l.h b/gdb/config/mips/tm-tx39l.h
new file mode 100644
index 0000000..8ceec72
--- /dev/null
+++ b/gdb/config/mips/tm-tx39l.h
@@ -0,0 +1,39 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define MIPS_EABI 1
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE
+
+#include "mips/tm-mips.h"
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES 	\
+    {	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3", \
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7", \
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7", \
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra", \
+	"sr",	"lo",	"hi",	"bad",	"cause","pc", \
+	"",   	"",   	"",   	"",   	"",   	"",   	"",   	"", \
+	"",   	"",   	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",  	"",  	"",  	"",  	"",  	"", \
+	"",  	"",  	"",	"", \
+	"",	"",	"",	"",	"",	"",	"",	"", \
+	"",	"", "config", "cache", "debug", "depc", "epc",	"" \
+    }
diff --git a/gdb/config/mips/tm-vr4100.h b/gdb/config/mips/tm-vr4100.h
new file mode 100644
index 0000000..843f49c
--- /dev/null
+++ b/gdb/config/mips/tm-vr4100.h
@@ -0,0 +1,25 @@
+/* Copyright (C) 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define MIPS_EABI 1
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_NONE
+#define TARGET_MONITOR_PROMPT "<RISQ> "
+#define TARGET_PTR_BIT 64
+
+#include "mips/tm-bigmips64.h"
diff --git a/gdb/config/mips/tm-vr4300.h b/gdb/config/mips/tm-vr4300.h
new file mode 100644
index 0000000..541ca44
--- /dev/null
+++ b/gdb/config/mips/tm-vr4300.h
@@ -0,0 +1,22 @@
+/* Copyright (C) 1993, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define TARGET_MONITOR_PROMPT "<RISQ> "
+
+#include "mips/tm-bigmips64.h"
diff --git a/gdb/config/mips/tm-vr4300el.h b/gdb/config/mips/tm-vr4300el.h
new file mode 100644
index 0000000..75e8693
--- /dev/null
+++ b/gdb/config/mips/tm-vr4300el.h
@@ -0,0 +1,22 @@
+/* Copyright (C) 1993, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define TARGET_MONITOR_PROMPT "<RISQ> "
+
+#include "mips/tm-mips64.h"
diff --git a/gdb/config/mips/tm-vr5000.h b/gdb/config/mips/tm-vr5000.h
new file mode 100644
index 0000000..b834a77
--- /dev/null
+++ b/gdb/config/mips/tm-vr5000.h
@@ -0,0 +1,23 @@
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define TARGET_MONITOR_PROMPT "<RISQ> "
+#define MIPS_EABI 1
+
+#include "mips/tm-bigmips64.h"
diff --git a/gdb/config/mips/tm-vr5000el.h b/gdb/config/mips/tm-vr5000el.h
new file mode 100644
index 0000000..c6897d1
--- /dev/null
+++ b/gdb/config/mips/tm-vr5000el.h
@@ -0,0 +1,23 @@
+/* Copyright (C) 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#define TARGET_MONITOR_PROMPT "<RISQ> "
+#define MIPS_EABI 1
+
+#include "mips/tm-mips64.h"
diff --git a/gdb/config/mips/tm-vxmips.h b/gdb/config/mips/tm-vxmips.h
new file mode 100644
index 0000000..392a929
--- /dev/null
+++ b/gdb/config/mips/tm-vxmips.h
@@ -0,0 +1,31 @@
+/* Target machine description for VxWorks MIPS's, for GDB, the GNU debugger.
+   Copyright 1996 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+#include "mips/tm-mips.h"
+
+/* FIXME: These are almost certainly wrong. */
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (NUM_REGS)
diff --git a/gdb/config/mips/tx39.mt b/gdb/config/mips/tx39.mt
new file mode 100644
index 0000000..8b4c1a9
--- /dev/null
+++ b/gdb/config/mips/tx39.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o dve3900-rom.o monitor.o dsrec.o
+TM_FILE= tm-tx39.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/tx39l.mt b/gdb/config/mips/tx39l.mt
new file mode 100644
index 0000000..3508329
--- /dev/null
+++ b/gdb/config/mips/tx39l.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian mips board, typically an IDT.
+TDEPFILES= mips-tdep.o remote-mips.o dve3900-rom.o monitor.o dsrec.o
+TM_FILE= tm-tx39l.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/vr4100.mt b/gdb/config/mips/vr4100.mt
new file mode 100644
index 0000000..c5ae4f9
--- /dev/null
+++ b/gdb/config/mips/vr4100.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian SIM monitor board.
+TDEPFILES= mips-tdep.o remote-mips.o
+TM_FILE= tm-vr4100.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/vr4300.mt b/gdb/config/mips/vr4300.mt
new file mode 100644
index 0000000..22cb25e
--- /dev/null
+++ b/gdb/config/mips/vr4300.mt
@@ -0,0 +1,5 @@
+# Target: Big-endian SIM monitor board.
+TDEPFILES= mips-tdep.o remote-mips.o
+TM_FILE= tm-vr4300.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/vr4300el.mt b/gdb/config/mips/vr4300el.mt
new file mode 100644
index 0000000..cff7241
--- /dev/null
+++ b/gdb/config/mips/vr4300el.mt
@@ -0,0 +1,5 @@
+# Target: Little-endian SIM monitor board.
+TDEPFILES= mips-tdep.o remote-mips.o
+TM_FILE= tm-vr4300el.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/vr5000.mt b/gdb/config/mips/vr5000.mt
new file mode 100644
index 0000000..316c548
--- /dev/null
+++ b/gdb/config/mips/vr5000.mt
@@ -0,0 +1,7 @@
+# Target: Big-endian SIM monitor board.
+TDEPFILES= mips-tdep.o remote-mips.o
+TM_FILE= tm-vr5000.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
+GDBSERVER_DEPFILES= low-sim.o
+GDBSERVER_LIBS = ../../sim/mips/libsim.a ../../bfd/libbfd.a ../../libiberty/libiberty.a -lm
diff --git a/gdb/config/mips/vr5000el.mt b/gdb/config/mips/vr5000el.mt
new file mode 100644
index 0000000..99687ed
--- /dev/null
+++ b/gdb/config/mips/vr5000el.mt
@@ -0,0 +1,5 @@
+# Target: Little-endian SIM monitor board.
+TDEPFILES= mips-tdep.o remote-mips.o
+TM_FILE= tm-vr5000el.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/mips/libsim.a
diff --git a/gdb/config/mips/vxmips.mt b/gdb/config/mips/vxmips.mt
new file mode 100644
index 0000000..a20cf96
--- /dev/null
+++ b/gdb/config/mips/vxmips.mt
@@ -0,0 +1,3 @@
+# Target: MIPS running VxWorks
+TDEPFILES= mips-tdep.o remote-vx.o remote-vxmips.o xdr_ld.o xdr_ptrace.o xdr_rdb.o
+TM_FILE= tm-vxmips.h
diff --git a/gdb/config/mips/xm-irix3.h b/gdb/config/mips/xm-irix3.h
new file mode 100644
index 0000000..d096594
--- /dev/null
+++ b/gdb/config/mips/xm-irix3.h
@@ -0,0 +1,31 @@
+/* Copyright (C) 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is for the iris. */
+
+#define HAVE_TERMIO
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Override register locations in upage for SGI machines */
+#undef REGISTER_U_ADDR
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+  if (regno < PC_REGNUM)				\
+      addr = regno;					\
+  else							\
+      addr = regno + NSIG_HNDLRS; /* Skip over signal handlers */
diff --git a/gdb/config/mips/xm-irix4.h b/gdb/config/mips/xm-irix4.h
new file mode 100644
index 0000000..14d21f0
--- /dev/null
+++ b/gdb/config/mips/xm-irix4.h
@@ -0,0 +1,33 @@
+/* Definitions for irix4 hosting support.
+
+Copyright (C) 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is for the iris. */
+
+#include "mips/xm-irix3.h"
+
+#define BROKEN_SIGINFO_H	/* <sys/siginfo.h> si_pid & si_uid are bogus */
+
+/* Irix 4.0.1 and later have termios.  Not sure about earlier versions.  */
+#undef HAVE_TERMIO
+#define HAVE_TERMIOS
+
+/* This enables reliable signals (and the associated setjmp/longjmp), and gives
+   bsdish prototypes for getpgrp/setpgrg/setgroups and initgroups.  */
+#define _BSD_COMPAT
diff --git a/gdb/config/mips/xm-irix5.h b/gdb/config/mips/xm-irix5.h
new file mode 100644
index 0000000..a64277b
--- /dev/null
+++ b/gdb/config/mips/xm-irix5.h
@@ -0,0 +1,35 @@
+/* Definitions for irix5 hosting support.
+
+Copyright (C) 1993, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "xm-sysv4.h"
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Override register locations in upage for SGI machines */
+#undef REGISTER_U_ADDR
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+  if (regno < PC_REGNUM)				\
+      addr = regno;					\
+  else							\
+      addr = regno + NSIG_HNDLRS; /* Skip over signal handlers */
+
+/* This enables reliable signals (and the associated setjmp/longjmp), and gives
+   bsdish prototypes for getpgrp/setpgrg/setgroups and initgroups.  */
+#define _BSD_COMPAT
diff --git a/gdb/config/mips/xm-mips.h b/gdb/config/mips/xm-mips.h
new file mode 100644
index 0000000..a2e9a50
--- /dev/null
+++ b/gdb/config/mips/xm-mips.h
@@ -0,0 +1,61 @@
+/* Definitions to make GDB run on a mips box under 4.3bsd.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+   Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin(af@cs.cmu.edu) at CMU
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+#ifdef ultrix
+/* Needed for DECstation core files.  */
+#include <machine/param.h>
+#define KERNEL_U_ADDR UADDR
+
+/* Native Ultrix cc has broken long long support.  */
+#ifndef __GNUC__
+#undef CC_HAS_LONG_LONG
+#endif
+#endif
+
+#if ! defined (__STDC__) && ! defined (offsetof)
+# define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* Only used for core files on DECstations.
+   First four registers at u.u_ar0 are saved arguments, and
+   there is no r0 saved.   Float registers are saved
+   in u_pcb.pcb_fpregs, not relative to u.u_ar0.  */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+	{ \
+	  if (regno < FP0_REGNUM) \
+	    addr = blockend + sizeof(int) * (4 + regno - 1); \
+	  else \
+	    addr = offsetof (struct user, u_pcb.pcb_fpregs[0]) + \
+		   sizeof (int) * (regno - FP0_REGNUM); \
+	}
+
+/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
+#define	ONE_PROCESS_WRITETEXT
+
+/* HAVE_SGTTY also works, last we tried.
+
+   But we have termios, at least as of Ultrix 4.2A, so use it.  */
+#define HAVE_TERMIOS
diff --git a/gdb/config/mips/xm-mipsm3.h b/gdb/config/mips/xm-mipsm3.h
new file mode 100644
index 0000000..6a5a73c
--- /dev/null
+++ b/gdb/config/mips/xm-mipsm3.h
@@ -0,0 +1,32 @@
+/* Definitions to make GDB run on a mips box under 4.3bsd.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+   Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin(af@cs.cmu.edu) at CMU
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+#define KERNEL_U_ADDR 0 /* Not needed. */
+
+/* Only used for core files on DECstations. */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) 		\
+	if (regno < 38) addr = (NBPG*UPAGES) + (regno - 38)*sizeof(int);\
+	else addr = 0; /* ..somewhere in the pcb */
diff --git a/gdb/config/mips/xm-mipsv4.h b/gdb/config/mips/xm-mipsv4.h
new file mode 100644
index 0000000..d80ba43
--- /dev/null
+++ b/gdb/config/mips/xm-mipsv4.h
@@ -0,0 +1,23 @@
+/* Definitions for MIPS running SVR4 hosting support.
+
+Copyright (C) 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "xm-sysv4.h"
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
diff --git a/gdb/config/mips/xm-news-mips.h b/gdb/config/mips/xm-news-mips.h
new file mode 100644
index 0000000..06aac1a
--- /dev/null
+++ b/gdb/config/mips/xm-news-mips.h
@@ -0,0 +1,24 @@
+/* Definitions to make GDB run on a mips box under 4.3bsd.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+   Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
+   and by Alessandro Forin(af@cs.cmu.edu) at CMU
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER BIG_ENDIAN
+#endif
diff --git a/gdb/config/mips/xm-riscos.h b/gdb/config/mips/xm-riscos.h
new file mode 100644
index 0000000..467f32a
--- /dev/null
+++ b/gdb/config/mips/xm-riscos.h
@@ -0,0 +1,28 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HAVE_TERMIO
+
+#if !defined (HOST_BYTE_ORDER)
+#define HOST_BYTE_ORDER BIG_ENDIAN
+#endif
+
+#define USG 1
+
+/* setjmp.h requires uid_t.  */
+#include <sys/types.h>
diff --git a/gdb/config/mn10200/mn10200.mt b/gdb/config/mn10200/mn10200.mt
new file mode 100644
index 0000000..c85a2fb
--- /dev/null
+++ b/gdb/config/mn10200/mn10200.mt
@@ -0,0 +1,6 @@
+# Target: Matsushita mn10200
+TDEPFILES= mn10200-tdep.o
+TM_FILE= tm-mn10200.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/mn10200/libsim.a
diff --git a/gdb/config/mn10200/tm-mn10200.h b/gdb/config/mn10200/tm-mn10200.h
new file mode 100644
index 0000000..671b534
--- /dev/null
+++ b/gdb/config/mn10200/tm-mn10200.h
@@ -0,0 +1,212 @@
+/* Parameters for execution on a Matsushita mn10200 processor.
+   Copyright 1997 Free Software Foundation, Inc. 
+
+   Contributed by Geoffrey Noer <noer@cygnus.com>
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The mn10200 is little endian.  */
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* ints are only 16bits on the mn10200.  */
+#undef TARGET_INT_BIT
+#define TARGET_INT_BIT 16
+
+/* The mn10200 doesn't support long long types.  */
+#undef TARGET_LONG_LONG_BIT
+#define TARGET_LONG_LONG_BIT 32
+
+/* The mn10200 doesn't support double or long double either.  */
+#undef TARGET_DOUBLE_BIT
+#undef TARGET_LONG_DOUBLE_BIT
+#define TARGET_DOUBLE_BIT 32
+#define TARGET_LONG_DOUBLE_BIT 32
+
+/* Not strictly correct, but the machine independent code is not
+   ready to handle any of the basic sizes not being a power of two.  */
+#undef TARGET_PTR_BIT
+#define TARGET_PTR_BIT 32
+
+/* The mn10200 really has 24 bit registers but the simulator reads/writes
+   them as 32bit values, so we claim they're 32bits each.  This may have
+   to be tweaked if the Matsushita emulator/board really deals with them
+   as 24bits each.  */
+#define REGISTER_SIZE 4
+
+#define MAX_REGISTER_RAW_SIZE REGISTER_SIZE
+#define NUM_REGS 11
+
+#define REGISTER_BYTES (NUM_REGS * REGISTER_SIZE)
+
+#define REGISTER_NAMES \
+{ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "sp", \
+  "pc", "mdr", "psw"}
+
+#define FP_REGNUM 6
+#define SP_REGNUM 7
+#define PC_REGNUM 8
+#define MDR_REGNUM 9
+#define PSW_REGNUM 10
+
+/* Treat the registers as 32bit values.  */
+#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_long
+
+#define REGISTER_BYTE(REG) ((REG) * REGISTER_SIZE)
+#define REGISTER_VIRTUAL_SIZE(REG) REGISTER_SIZE
+#define REGISTER_RAW_SIZE(REG) REGISTER_SIZE
+
+#define MAX_REGISTER_VIRTUAL_SIZE REGISTER_SIZE
+
+/* The breakpoint instruction must be the same size as te smallest
+   instruction in the instruction set.
+
+   The Matsushita mn10x00 processors have single byte instructions
+   so we need a single byte breakpoint.  Matsushita hasn't defined
+   one, so we defined it ourselves.
+
+   0xff is the only available single byte insn left on the mn10200.  */
+#define BREAKPOINT {0xff}
+
+#define FUNCTION_START_OFFSET 0
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Stacks grow the normal way.  */
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  (read_memory_integer (read_register (SP_REGNUM), REGISTER_SIZE) & 0xffffff)
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct type;
+struct value;
+#endif
+
+#define EXTRA_FRAME_INFO struct frame_saved_regs fsr; int status; int stack_size;
+
+extern void mn10200_init_extra_frame_info PARAMS ((struct frame_info *));
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) mn10200_init_extra_frame_info (fi)
+#define INIT_FRAME_PC(x,y)
+
+extern void mn10200_frame_find_saved_regs PARAMS ((struct frame_info *,
+						   struct frame_saved_regs *));
+#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr
+
+extern CORE_ADDR mn10200_frame_chain PARAMS ((struct frame_info *));
+#define FRAME_CHAIN(fi) mn10200_frame_chain (fi)
+#define FRAME_CHAIN_VALID(FP, FI)	generic_frame_chain_valid (FP, FI)
+
+extern CORE_ADDR mn10200_find_callers_reg PARAMS ((struct frame_info *, int));
+extern CORE_ADDR mn10200_frame_saved_pc   PARAMS ((struct frame_info *));
+#define FRAME_SAVED_PC(FI) (mn10200_frame_saved_pc (FI))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \
+  { \
+    if (TYPE_LENGTH (TYPE) > 8) \
+      abort (); \
+    else if (TYPE_LENGTH (TYPE) > 2 && TYPE_CODE (TYPE) != TYPE_CODE_PTR) \
+      { \
+	memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), 2); \
+	memcpy (VALBUF + 2, REGBUF + REGISTER_BYTE (1), 2); \
+      } \
+    else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)\
+      { \
+        memcpy (VALBUF, REGBUF + REGISTER_BYTE (4), TYPE_LENGTH (TYPE)); \
+      } \
+    else \
+      { \
+        memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), TYPE_LENGTH (TYPE)); \
+      } \
+  }
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  extract_address (REGBUF + REGISTER_BYTE (4), \
+		   REGISTER_RAW_SIZE (4))
+
+#define STORE_RETURN_VALUE(TYPE, VALBUF) \
+  { \
+    if (TYPE_LENGTH (TYPE) > 8) \
+      abort (); \
+    else if (TYPE_LENGTH (TYPE) > 2 && TYPE_CODE (TYPE) != TYPE_CODE_PTR) \
+      { \
+	write_register_bytes (REGISTER_BYTE (0), VALBUF, 2); \
+	write_register_bytes (REGISTER_BYTE (1), VALBUF + 2, 2); \
+      } \
+    else if (TYPE_CODE (TYPE) == TYPE_CODE_PTR)\
+      { \
+        write_register_bytes (REGISTER_BYTE (4), VALBUF, TYPE_LENGTH (TYPE)); \
+      } \
+    else \
+      { \
+        write_register_bytes (REGISTER_BYTE (0), VALBUF, TYPE_LENGTH (TYPE)); \
+      } \
+  }
+
+#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \
+  (SP) = mn10200_store_struct_return (STRUCT_ADDR, SP)
+
+extern CORE_ADDR mn10200_skip_prologue PARAMS ((CORE_ADDR));
+#define SKIP_PROLOGUE(pc) pc = mn10200_skip_prologue (pc)
+
+#define FRAME_ARGS_SKIP 0
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_NUM_ARGS(val, fi) ((val) = -1)
+
+extern void mn10200_pop_frame PARAMS ((struct frame_info *));
+#define POP_FRAME mn10200_pop_frame (get_current_frame ())
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+
+extern CORE_ADDR mn10200_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+#define PUSH_RETURN_ADDRESS(PC, SP)  mn10200_push_return_address (PC, SP)
+
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+
+extern CORE_ADDR
+mn10200_push_arguments PARAMS ((int, struct value **, CORE_ADDR,
+			     unsigned char, CORE_ADDR));
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = mn10200_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+
+#define REG_STRUCT_HAS_ADDR(gcc_p,TYPE) \
+  	(TYPE_LENGTH (TYPE) > 8)
+
+extern use_struct_convention_fn mn10200_use_struct_convention;
+#define USE_STRUCT_CONVENTION(GCC_P, TYPE) mn10200_use_struct_convention (GCC_P, TYPE)
+
+/* Override the default get_saved_register function with
+   one that takes account of generic CALL_DUMMY frames.  */
+#define GET_SAVED_REGISTER
+
+/* Define this for Wingdb */
+#define TARGET_MN10200
diff --git a/gdb/config/mn10300/mn10300.mt b/gdb/config/mn10300/mn10300.mt
new file mode 100644
index 0000000..fc503bd
--- /dev/null
+++ b/gdb/config/mn10300/mn10300.mt
@@ -0,0 +1,6 @@
+# Target: Matsushita mn10300
+TDEPFILES= mn10300-tdep.o
+TM_FILE= tm-mn10300.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/mn10300/libsim.a
diff --git a/gdb/config/mn10300/tm-mn10300.h b/gdb/config/mn10300/tm-mn10300.h
new file mode 100644
index 0000000..e7d3fd7
--- /dev/null
+++ b/gdb/config/mn10300/tm-mn10300.h
@@ -0,0 +1,165 @@
+/* Parameters for execution on a Matsushita mn10300 processor.
+   Copyright 1996, 1997 Free Software Foundation, Inc. 
+
+   Contributed by Geoffrey Noer <noer@cygnus.com>
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The mn10300 is little endian.  */
+#define TARGET_BYTE_ORDER_DEFAULT LITTLE_ENDIAN
+
+/* All registers are 32bits (phew!).  */
+#define REGISTER_SIZE 4
+#define MAX_REGISTER_RAW_SIZE 4
+#define NUM_REGS 32
+
+#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int
+
+#define REGISTER_BYTE(REG) ((REG) * 4)
+#define REGISTER_VIRTUAL_SIZE(REG) 4
+#define REGISTER_RAW_SIZE(REG) 4
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+#define REGISTER_BYTES (NUM_REGS * REGISTER_SIZE)
+
+extern char **mn10300_register_names;
+#define REGISTER_NAME(i) mn10300_register_names[i]
+
+#define D2_REGNUM 2
+#define D3_REGNUM 3
+#define A2_REGNUM 6
+#define A3_REGNUM 7
+#define SP_REGNUM 8
+#define PC_REGNUM 9
+#define MDR_REGNUM 10
+#define PSW_REGNUM 11
+#define LIR_REGNUM 12
+#define LAR_REGNUM 13
+
+/* Pseudo register that contains true address of executing stack frame */
+#define FP_REGNUM 31
+
+/* BREAKPOINT_FROM_PC uses the program counter value to determine the
+   breakpoint that should be used */
+extern breakpoint_from_pc_fn mn10300_breakpoint_from_pc;
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) mn10300_breakpoint_from_pc (pcptr, lenptr)
+
+#define FUNCTION_START_OFFSET 0
+
+#define DECR_PC_AFTER_BREAK 0
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  read_memory_integer (read_register (SP_REGNUM), 4)
+
+#ifdef __STDC__
+struct frame_info;
+struct type;
+struct value;
+#endif
+
+extern void mn10300_init_extra_frame_info PARAMS ((struct frame_info *));
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) mn10300_init_extra_frame_info (fi)
+#define INIT_FRAME_PC		/* Not necessary */
+
+#define FRAME_INIT_SAVED_REGS(fi) /* handled by init_extra_frame_info */
+
+extern CORE_ADDR mn10300_frame_chain PARAMS ((struct frame_info *));
+#define FRAME_CHAIN(fi) mn10300_frame_chain (fi)
+#define FRAME_CHAIN_VALID(FP, FI)	generic_frame_chain_valid (FP, FI)
+
+extern CORE_ADDR mn10300_find_callers_reg PARAMS ((struct frame_info *, int));
+extern CORE_ADDR mn10300_frame_saved_pc   PARAMS ((struct frame_info *));
+#define FRAME_SAVED_PC(FI) (mn10300_frame_saved_pc (FI))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF. */
+
+#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \
+  if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \
+    memcpy (VALBUF, REGBUF + REGISTER_BYTE (4), TYPE_LENGTH (TYPE)); \
+  else \
+    memcpy (VALBUF, REGBUF + REGISTER_BYTE (0), TYPE_LENGTH (TYPE));
+
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  extract_address (REGBUF + REGISTER_BYTE (4), \
+		   REGISTER_RAW_SIZE (4))
+
+#define STORE_RETURN_VALUE(TYPE, VALBUF) \
+  if (TYPE_CODE (TYPE) == TYPE_CODE_PTR) \
+    write_register_bytes(REGISTER_BYTE (4), VALBUF, TYPE_LENGTH (TYPE)); \
+  else \
+    write_register_bytes(REGISTER_BYTE (0), VALBUF, TYPE_LENGTH (TYPE));
+
+#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP) \
+  (SP) = mn10300_store_struct_return (STRUCT_ADDR, SP)
+
+extern CORE_ADDR mn10300_skip_prologue PARAMS ((CORE_ADDR));
+#define SKIP_PROLOGUE(pc) pc = mn10300_skip_prologue (pc)
+
+#define FRAME_ARGS_SKIP 0
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_NUM_ARGS(val, fi) ((val) = -1)
+
+extern void mn10300_pop_frame PARAMS ((struct frame_info *));
+#define POP_FRAME mn10300_pop_frame (get_current_frame ())
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+
+extern CORE_ADDR mn10300_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+#define PUSH_RETURN_ADDRESS(PC, SP)  mn10300_push_return_address (PC, SP)
+
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+
+extern CORE_ADDR
+mn10300_push_arguments PARAMS ((int, struct value **, CORE_ADDR,
+				unsigned char, CORE_ADDR ));
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = mn10300_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+
+#define REG_STRUCT_HAS_ADDR(gcc_p,TYPE) \
+	(TYPE_LENGTH (TYPE) > 8)
+
+extern use_struct_convention_fn mn10300_use_struct_convention;
+#define USE_STRUCT_CONVENTION(GCC_P, TYPE) mn10300_use_struct_convention (GCC_P, TYPE)
+
+/* override the default get_saved_register function with
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+/* Cons up virtual frame pointer for trace */
+extern void mn10300_virtual_frame_pointer PARAMS ((CORE_ADDR, long *, long *));
+#define TARGET_VIRTUAL_FRAME_POINTER(PC, REGP, OFFP) \
+	mn10300_virtual_frame_pointer ((PC), (REGP), (OFFP))
+
+/* Define this for Wingdb */
+
+#define TARGET_MN10300
diff --git a/gdb/config/nm-empty.h b/gdb/config/nm-empty.h
new file mode 100644
index 0000000..7069d8c
--- /dev/null
+++ b/gdb/config/nm-empty.h
@@ -0,0 +1,2 @@
+/* This is just a dummy file to symlink to when GDB is configured as a
+   cross-only debugger.  */
diff --git a/gdb/config/nm-gnu.h b/gdb/config/nm-gnu.h
new file mode 100644
index 0000000..b7ee4dc
--- /dev/null
+++ b/gdb/config/nm-gnu.h
@@ -0,0 +1,45 @@
+/* Common declarations for the GNU Hurd
+
+   Copyright (C) 1995, 1998 Free Software Foundation, Inc.
+
+   Written by Miles Bader <miles@gnu.ai.mit.edu>
+
+   The GNU Hurd is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License as
+   published by the Free Software Foundation; either version 2, or (at
+   your option) any later version.
+
+   The GNU Hurd is distributed in the hope that it will be useful, but
+   WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#ifndef __NM_GNU_H__
+#define __NM_GNU_H__
+
+#include <unistd.h>
+#include <mach.h>
+#include <mach/exception.h>
+
+#undef target_pid_to_str
+#define target_pid_to_str(pid) gnu_target_pid_to_str(pid)
+extern char *gnu_target_pid_to_str (int pid);
+
+/* Before storing, we need to read all the registers.  */
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Don't do wait_for_inferior on attach.  */
+#define ATTACH_NO_WAIT
+
+/* Use SVR4 style shared library support */
+#define SVR4_SHARED_LIBS
+#include "solib.h"
+#define NO_CORE_OPS
+
+#define MAINTENANCE_CMDS 1
+
+#endif /* __NM_GNU_H__ */
diff --git a/gdb/config/nm-lynx.h b/gdb/config/nm-lynx.h
new file mode 100644
index 0000000..2daf0fa
--- /dev/null
+++ b/gdb/config/nm-lynx.h
@@ -0,0 +1,83 @@
+/* Native-dependent definitions for LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_LYNX_H
+#define NM_LYNX_H
+
+#include <sys/conf.h>
+#include <sys/kernel.h>
+/* sys/kernel.h should define this, but doesn't always, sigh. */
+#ifndef __LYNXOS
+#define __LYNXOS
+#endif
+#include <sys/mem.h>
+#include <sys/signal.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/itimer.h>
+#include <sys/file.h>
+#include <sys/proc.h>
+#include "gdbthread.h"
+
+/* This is the amount to subtract from u.u_ar0 to get the offset in
+   the core file of the register values.  */
+
+#define KERNEL_U_ADDR USRSTACK
+
+#undef FLOAT_INFO	/* No float info yet */
+
+/* As of LynxOS 2.2.2 (beta 8/15/94), this is int.  Previous versions seem to
+   have had no prototype, so I'm not sure why GDB used to define this to
+   char *.  */
+#define PTRACE_ARG3_TYPE int
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* Thread ID of stopped thread.  */
+
+#define WIFTID(x) (((union wait *)&x)->w_tid)
+
+/* Override child_wait in inftarg.c */
+
+#define CHILD_WAIT
+
+/* Override child_resume in infptrace.c */
+
+#define CHILD_RESUME
+
+/* Override child_thread_alive in intarg.c */
+
+#define CHILD_THREAD_ALIVE
+
+#include "target.h"
+
+extern int child_wait PARAMS ((int pid, struct target_waitstatus *status));
+
+/* Lynx needs a special definition of this so that we can
+   print out the pid and thread number seperatly.  */
+
+#undef target_pid_to_str
+
+#define target_pid_to_str(PID) lynx_pid_to_str (PID)
+
+extern char *lynx_pid_to_str PARAMS ((int pid));
+
+#endif /* NM_LYNX_H */
diff --git a/gdb/config/nm-m3.h b/gdb/config/nm-m3.h
new file mode 100644
index 0000000..6ea5256
--- /dev/null
+++ b/gdb/config/nm-m3.h
@@ -0,0 +1,123 @@
+/* Mach 3.0 common definitions and global vars.
+
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_M3_H
+#define NM_M3_H
+
+#include <mach.h>
+
+/* Mach3 doesn't declare errno in <errno.h>.  */
+extern int errno;
+
+/* Task port of our debugged inferior. */
+
+extern task_t inferior_task;
+
+/* Thread port of the current thread in the inferior. */
+
+extern thread_t current_thread;
+
+/* If nonzero, we must suspend/abort && resume threads
+ * when setting or getting the state.
+ */
+extern int must_suspend_thread;
+
+#define PREPARE_TO_PROCEED(select_it) mach3_prepare_to_proceed(select_it)
+
+/* Try to get the privileged host port for authentication to machid
+ *
+ * If you can get this, you may debug anything on this host.
+ *
+ * If you can't, gdb gives it's own task port as the
+ * authentication port
+ */
+#define  mach_privileged_host_port() task_by_pid(-1)
+
+/*
+ * This is the MIG ID number of the emulator/server bsd_execve() RPC call.
+ *
+ * It SHOULD never change, but if it does, gdb `run'
+ * command won't work until you fix this define.
+ * 
+ */
+#define MIG_EXEC_SYSCALL_ID		101000
+
+/* If our_message_port gets a msg with this ID,
+ * GDB suspends it's inferior and enters command level.
+ * (Useful at least if ^C does not work)
+ */
+#define GDB_MESSAGE_ID_STOP			0x41151
+
+/* wait3 WNOHANG is defined in <sys/wait.h> but
+ * for some reason gdb does not want to include
+ * that file.
+ *
+ * If your system defines WNOHANG differently, this has to be changed.
+ */
+#define WNOHANG 1
+
+/* Before storing, we need to read all the registers.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Check if the inferior exists */
+#define MACH_ERROR_NO_INFERIOR \
+  do if (!MACH_PORT_VALID (inferior_task)) \
+  	error ("Inferior task does not exist."); while(0)
+
+/* Error handler for mach calls */
+#define CHK(str,ret)	\
+  do if (ret != KERN_SUCCESS) \
+       error ("Gdb %s [%d] %s : %s\n",__FILE__,__LINE__,str, \
+	      mach_error_string(ret)); while(0)
+
+/* This is from POE9 emulator/emul_stack.h
+ */
+/*
+ * Top of emulator stack holds link and reply port.
+ */
+struct emul_stack_top {
+	struct emul_stack_top	*link;
+	mach_port_t		reply_port;
+};
+
+#define EMULATOR_STACK_SIZE (4096*4)
+
+#define THREAD_ALLOWED_TO_BREAK(mid) mach_thread_for_breakpoint (mid)
+
+#define THREAD_PARSE_ID(arg) mach_thread_parse_id (arg)
+
+#define THREAD_OUTPUT_ID(mid) mach_thread_output_id (mid)
+
+#define ATTACH_TO_THREAD attach_to_thread
+
+/* Don't do wait_for_inferior on attach.  */
+#define ATTACH_NO_WAIT
+
+/* Do Mach 3 dependent operations when ^C or a STOP is requested */
+#define DO_QUIT() mach3_quit ()
+
+#if 0
+/* This is bogus.  It is NOT OK to quit out of target_wait.  */
+/* If in mach_msg() and ^C is typed set immediate_quit */
+#define REQUEST_QUIT() mach3_request_quit ()
+#endif
+
+#endif /* NM_M3_H */
diff --git a/gdb/config/nm-nbsd.h b/gdb/config/nm-nbsd.h
new file mode 100644
index 0000000..bc1d6a6
--- /dev/null
+++ b/gdb/config/nm-nbsd.h
@@ -0,0 +1,86 @@
+/* Native-dependent definitions for NetBSD.
+   Copyright 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#include <machine/vmparam.h>
+
+#define KERNEL_U_ADDR USRSTACK
+
+#define PTRACE_ARG3_TYPE char*
+
+#define FETCH_INFERIOR_REGISTERS
+
+#define ATTACH_DETACH
+
+#include "solib.h"      /* Support for shared libraries. */
+
+/* make structure definitions match up with those expected in solib.c */
+#define link_object	sod
+#define lo_name		sod_name
+#define lo_library	sod_library
+#define lo_unused	sod_reserved
+#define lo_major	sod_major
+#define lo_minor	sod_minor
+#define lo_next		sod_next
+
+#define link_map	so_map
+#define lm_addr		som_addr
+#define lm_name		som_path
+#define lm_next		som_next
+#define lm_lop		som_sod
+#define lm_lob		som_sodbase
+#define lm_rwt		som_write
+#define lm_ld		som_dynamic
+#define lm_lpd		som_spd
+
+#define link_dynamic_2	section_dispatch_table
+#define ld_loaded	sdt_loaded
+#define ld_need		sdt_sods
+#define ld_rules	sdt_filler1
+#define ld_got		sdt_got
+#define ld_plt		sdt_plt
+#define ld_rel		sdt_rel
+#define ld_hash		sdt_hash
+#define ld_stab		sdt_nzlist
+#define ld_stab_hash	sdt_filler2
+#define ld_buckets	sdt_buckets
+#define ld_symbols	sdt_strings
+#define ld_symb_size	sdt_str_sz
+#define ld_text		sdt_text_sz
+#define ld_plt_sz	sdt_plt_sz
+
+#define rtc_symb	rt_symbol
+#define rtc_sp		rt_sp
+#define rtc_next	rt_next
+
+#define ld_debug	so_debug
+#define ldd_version	dd_version
+#define ldd_in_debugger	dd_in_debugger
+#define ldd_sym_loaded	dd_sym_loaded
+#define ldd_bp_addr	dd_bpt_addr
+#define ldd_bp_inst	dd_bpt_shadow
+#define ldd_cp		dd_cc
+
+#define link_dynamic	_dynamic
+#define ld_version	d_version
+#define ldd		d_debug
+#define ld_un		d_un
+#define ld_2		d_sdt
diff --git a/gdb/config/nm-sysv4.h b/gdb/config/nm-sysv4.h
new file mode 100644
index 0000000..b891d4d
--- /dev/null
+++ b/gdb/config/nm-sysv4.h
@@ -0,0 +1,33 @@
+/* Definitions for running gdb on a host machine running any flavor of SVR4.
+   Copyright 1991, 1992, 1998 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Use SVR4 style shared library support */
+
+#define SVR4_SHARED_LIBS
+#include "solib.h"
+
+/* SVR4 has /proc support, so use it instead of ptrace. */
+
+#define USE_PROC_FS
+
+/* SVR4 machines can easily do attach and detach via /proc (procfs.c)
+   support */
+
+#define ATTACH_DETACH
diff --git a/gdb/config/none/nm-none.h b/gdb/config/none/nm-none.h
new file mode 100644
index 0000000..9d630f3
--- /dev/null
+++ b/gdb/config/none/nm-none.h
@@ -0,0 +1,18 @@
+/* Defines needed when configuring for "none".
+   Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
diff --git a/gdb/config/none/none.mh b/gdb/config/none/none.mh
new file mode 100644
index 0000000..33d5e4a
--- /dev/null
+++ b/gdb/config/none/none.mh
@@ -0,0 +1,5 @@
+# Host: "no target".  This can be used to build you
+# a Makefile that only runs administrative commands like 'clean',
+# 'gdb.tar.Z', etc.
+NAT_FILE= nm-none.h
+XM_FILE= xm-none.h
diff --git a/gdb/config/none/none.mt b/gdb/config/none/none.mt
new file mode 100644
index 0000000..300e2dc
--- /dev/null
+++ b/gdb/config/none/none.mt
@@ -0,0 +1,4 @@
+# Target: "no target".
+# This can be used to build you a Makefile that only runs administrative
+# commands like 'clean', 'gdb.tar.Z', etc.
+TM_FILE= tm-none.h
diff --git a/gdb/config/none/tm-none.h b/gdb/config/none/tm-none.h
new file mode 100644
index 0000000..4b16b3b
--- /dev/null
+++ b/gdb/config/none/tm-none.h
@@ -0,0 +1,23 @@
+/* Defines needed when configuring for "none".
+   Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This define is needed so that "gcc -MM" doesn't get errors and fail on
+   source files that use the value of INNER_THAN in preprocessor lines. */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
diff --git a/gdb/config/none/xm-none.h b/gdb/config/none/xm-none.h
new file mode 100644
index 0000000..9d630f3
--- /dev/null
+++ b/gdb/config/none/xm-none.h
@@ -0,0 +1,18 @@
+/* Defines needed when configuring for "none".
+   Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
diff --git a/gdb/config/ns32k/merlin.mh b/gdb/config/ns32k/merlin.mh
new file mode 100644
index 0000000..f9c3e7b
--- /dev/null
+++ b/gdb/config/ns32k/merlin.mh
@@ -0,0 +1,16 @@
+# Host: Merlin running utek 2.1
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+XM_FILE= xm-merlin.h
+
+# FIXME: M_INSTALL is gone from the gdb makefile.  If anyone cares
+# about the Merlin anymore, and the bug which inspired
+# SHELL_FILE/gdb-sh is still there, will need to reinstate it.  Also,
+# this should be done for native only.
+
+# See SHELL_FILE in xm-merlin.h for a explanation of this.
+
+# FIXME: This should use $prefix, but only if SHELL_FILE does too.
+
+M_INSTALL=cp /bin/sh /usr/local/lib/gdb-sh; \
+chmod ogu+rw /usr/local/lib/gdb-sh
+M_UNINSTALL = rm -f /usr/local/lib/gdb-sh
diff --git a/gdb/config/ns32k/merlin.mt b/gdb/config/ns32k/merlin.mt
new file mode 100644
index 0000000..b346077
--- /dev/null
+++ b/gdb/config/ns32k/merlin.mt
@@ -0,0 +1,3 @@
+# Target: Merlin running utek 2.1
+TDEPFILES= ns32k-tdep.o
+TM_FILE= tm-merlin.h
diff --git a/gdb/config/ns32k/nbsd.mh b/gdb/config/ns32k/nbsd.mh
new file mode 100644
index 0000000..aae025b
--- /dev/null
+++ b/gdb/config/ns32k/nbsd.mh
@@ -0,0 +1,5 @@
+# Host: PC532 running NetBSD
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-nbsd.h
+NAT_FILE= nm-nbsd.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o ns32knbsd-nat.o
diff --git a/gdb/config/ns32k/nbsd.mt b/gdb/config/ns32k/nbsd.mt
new file mode 100644
index 0000000..512132a
--- /dev/null
+++ b/gdb/config/ns32k/nbsd.mt
@@ -0,0 +1,3 @@
+# Target: PC532 running NetBSD
+TDEPFILES= ns32k-tdep.o solib.o
+TM_FILE= tm-nbsd.h
diff --git a/gdb/config/ns32k/nm-nbsd.h b/gdb/config/ns32k/nm-nbsd.h
new file mode 100644
index 0000000..cef536e
--- /dev/null
+++ b/gdb/config/ns32k/nm-nbsd.h
@@ -0,0 +1,36 @@
+/* Native-dependent definitions for ns32k running NetBSD, for GDB.
+   Copyright 1986, 1987, 1989, 1992, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_NBSD_H
+#define NM_NBSD_H
+
+/* Get generic NetBSD native definitions. */
+#include "nm-nbsd.h"
+
+#if 0
+#define FLOAT_INFO	{ extern ns32k_float_info(); ns32k_float_info(); }
+#endif
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+	(addr) = ns32k_register_u_addr ((blockend),(regno));
+
+extern int
+ns32k_register_u_addr PARAMS ((int, int));
+
+#endif /* NM_NBSD_H */
diff --git a/gdb/config/ns32k/nm-umax.h b/gdb/config/ns32k/nm-umax.h
new file mode 100644
index 0000000..add6e70
--- /dev/null
+++ b/gdb/config/ns32k/nm-umax.h
@@ -0,0 +1,54 @@
+/* Definitions to make GDB run on an encore under umax 4.2
+   Copyright 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands...  */
+#define ATTACH_DETACH
+
+/* Offset of registers within u area.  */
+#define U_REGS_OFFSET 0
+
+/* called from register_addr() -- blockend not used for now */
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+{ 									\
+  switch (regno) {							\
+  case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:	\
+	addr = PU_R0 - (regno * sizeof (int)); break;			\
+  case SP_REGNUM:							\
+  	addr = PU_SP; break;						\
+  case PC_REGNUM:							\
+  	addr = PU_PC; break;						\
+  case FP_REGNUM:							\
+  	addr = PU_FP; break;						\
+  case PS_REGNUM:							\
+  	addr = PU_PSL; break;						\
+  case FPS_REGNUM:							\
+  	addr = PU_FSR; break;						\
+  case FP0_REGNUM + 0: case FP0_REGNUM + 1:				\
+  case FP0_REGNUM + 2: case FP0_REGNUM + 3: 				\
+  case FP0_REGNUM + 4: case FP0_REGNUM + 5: 				\
+  case FP0_REGNUM + 6: case FP0_REGNUM + 7: 				\
+  	addr = PU_F0 + (regno - FP0_REGNUM) * sizeof (float); break;	\
+  case LP0_REGNUM + 0: case LP0_REGNUM + 1:				\
+  case LP0_REGNUM + 2: case LP0_REGNUM + 3:				\
+  	addr = PU_F0 + (regno - LP0_REGNUM) * sizeof (double); break;	\
+  default:								\
+  	printf ("bad argument to REGISTER_U_ADDR %d\n", regno);		\
+	abort ();							\
+  }									\
+}
diff --git a/gdb/config/ns32k/ns32km3.mh b/gdb/config/ns32k/ns32km3.mh
new file mode 100644
index 0000000..7f0992a
--- /dev/null
+++ b/gdb/config/ns32k/ns32km3.mh
@@ -0,0 +1,7 @@
+# Host: ns32k running Mach3
+
+XDEPFILES=
+NATDEPFILES= m3-nat.o ns32km3-nat.o fork-child.o corelow.o core-aout.o
+NAT_CLIBS= -L/usr/mach/lib -lnetname -lmachid -lmach
+XM_FILE= xm-ns32km3.h
+NAT_FILE= nm-m3.h
diff --git a/gdb/config/ns32k/ns32km3.mt b/gdb/config/ns32k/ns32km3.mt
new file mode 100644
index 0000000..9391176
--- /dev/null
+++ b/gdb/config/ns32k/ns32km3.mt
@@ -0,0 +1,3 @@
+# Target: ns32k with a.out on Mach 3
+TDEPFILES= ns32k-tdep.o 
+TM_FILE= tm-ns32km3.h
diff --git a/gdb/config/ns32k/tm-merlin.h b/gdb/config/ns32k/tm-merlin.h
new file mode 100644
index 0000000..f90c5e7
--- /dev/null
+++ b/gdb/config/ns32k/tm-merlin.h
@@ -0,0 +1,313 @@
+/* Definitions to target GDB to a merlin under utek 2.1
+   Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)   				\
+{ register int op = read_memory_integer (pc, 1);	\
+  if (op == 0x82)					\
+    { op = read_memory_integer (pc+2,1);		\
+      if ((op & 0x80) == 0) pc += 3;			\
+      else if ((op & 0xc0) == 0x80) pc += 4;		\
+      else pc += 6;					\
+    }}
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+	read_memory_integer (read_register (SP_REGNUM), 4)
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR (0x800000)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xf2}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Define this to say that the "svc" insn is followed by
+   codes in memory saying which kind of system call it is.  */
+
+#define NS32K_SVC_IMMED_OPERANDS
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS		25
+
+#define NUM_GENERAL_REGS	8
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",	\
+			"pc", "sp", "fp", "ps",				\
+ 			"fsr",						\
+ 			"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+			"l0", "l1", "l2", "l3", "l4",			\
+ 			}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define AP_REGNUM FP_REGNUM
+#define FP_REGNUM 10		/* Contains address of executing stack frame */
+#define SP_REGNUM 9		/* Contains address of top of stack */
+#define PC_REGNUM 8		/* Contains program counter */
+#define PS_REGNUM 11		/* Contains processor status */
+#define FPS_REGNUM 12		/* Floating point status register */
+#define FP0_REGNUM 13		/* Floating point register 0 */
+#define LP0_REGNUM 21		/* Double register 0 (same as FP0) */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES ((NUM_REGS - 4) * sizeof (int) + 4 * sizeof (double))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \
+	LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N) >= FP0_REGNUM ?		\
+    ((N) >= LP0_REGNUM ?	\
+     builtin_type_double	\
+     : builtin_type_float)	\
+   : builtin_type_int)	
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function.
+
+   On this machine this is a no-op, as gcc doesn't run on it yet.
+   This calling convention is not used. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the Merlin, the frame's nominal address is the FP value,
+   and at that address is saved previous FP value as a 4-byte word.  */
+
+#define FRAME_CHAIN(thisframe)  \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+/* compute base of arguments */
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)			\
+{ CORE_ADDR pc;						\
+  int insn;						\
+  int addr_mode;					\
+  int width;						\
+							\
+  pc = FRAME_SAVED_PC (fi);				\
+  insn = read_memory_integer (pc,2);			\
+  addr_mode = (insn >> 11) & 0x1f;			\
+  insn = insn & 0x7ff;					\
+  if ((insn & 0x7fc) == 0x57c				\
+      && addr_mode == 0x14) /* immediate */		\
+    { if (insn == 0x57c) /* adjspb */			\
+	width = 1;					\
+      else if (insn == 0x57d) /* adjspw */		\
+	width = 2;					\
+      else if (insn == 0x57f) /* adjspd */		\
+	width = 4;					\
+      numargs = read_memory_integer (pc+2,width);	\
+      if (width > 1)					\
+	flip_bytes (&numargs, width);			\
+      numargs = - sign_extend (numargs, width*8) / 4; }	\
+  else numargs = -1;					\
+}
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ int regmask,regnum;						\
+  int localcount;						\
+  CORE_ADDR enter_addr;						\
+  CORE_ADDR next_addr;						\
+								\
+  enter_addr = get_pc_function_start ((frame_info)->pc);	\
+  regmask = read_memory_integer (enter_addr+1, 1);		\
+  localcount = ns32k_localcount (enter_addr);			\
+  next_addr = (frame_info)->frame + localcount;			\
+  for (regnum = 0; regnum < 8; regnum++, regmask >>= 1)		\
+    (frame_saved_regs).regs[regnum]				\
+      = (regmask & 1) ? (next_addr -= 4) : 0;			\
+  (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;	\
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;	\
+  (frame_saved_regs).regs[FP_REGNUM]				\
+     = read_memory_integer ((frame_info)->frame, 4); }
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);	\
+  register int regnum;					\
+  sp = push_word (sp, read_register (PC_REGNUM));	\
+  sp = push_word (sp, read_register (FP_REGNUM));	\
+  write_register (FP_REGNUM, sp);			\
+  for (regnum = 0; regnum < 8; regnum++)  		\
+    sp = push_word (sp, read_register (regnum));	\
+  write_register (SP_REGNUM, sp);  			\
+}
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register struct frame_info *frame = get_current_frame ();	 \
+  register CORE_ADDR fp;					 \
+  register int regnum;						 \
+  struct frame_saved_regs fsr;					 \
+  struct frame_info *fi;						 \
+  fp = frame->frame;						 \
+  get_frame_saved_regs (frame, &fsr);				 \
+  for (regnum = 0; regnum < 8; regnum++)			 \
+    if (fsr.regs[regnum])					 \
+      write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));	 \
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));   \
+  write_register (SP_REGNUM, fp + 8);				 \
+  flush_cached_frames ();					 \
+}
+
+/* This sequence of words is the instructions
+     enter	0xff,0		82 ff 00
+     jsr	@0x00010203	7f ae c0 01 02 03
+     adjspd	0x69696969	7f a5 01 02 03 04
+     bpt			f2
+   Note this is 16 bytes.  */
+
+#define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 }
+
+#define CALL_DUMMY_START_OFFSET	3
+#define CALL_DUMMY_LENGTH	16
+#define CALL_DUMMY_ADDR		5
+#define CALL_DUMMY_NARGS	11
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   		\
+{ int flipped = fun | 0xc0000000;				\
+  flip_bytes (&flipped, 4);					\
+  *((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped;	\
+  flipped = - nargs * 4;					\
+  flip_bytes (&flipped, 4);					\
+  *((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped;	\
+}
diff --git a/gdb/config/ns32k/tm-nbsd.h b/gdb/config/ns32k/tm-nbsd.h
new file mode 100644
index 0000000..6e61de3
--- /dev/null
+++ b/gdb/config/ns32k/tm-nbsd.h
@@ -0,0 +1,79 @@
+/* Macro definitions for ns32k running under NetBSD.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Override number of expected traps from sysv. */
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Most definitions from umax could be used. */
+
+#include "ns32k/tm-umax.h"
+
+/* Generic NetBSD definitions.  */
+
+#include "tm-nbsd.h"
+
+/* Saved Pc.  Get it from sigcontext if within sigtramp.  */
+
+/* Offset to saved PC in sigcontext, from <machine/signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 20
+
+#undef FRAME_SAVED_PC(FRAME)
+#define FRAME_SAVED_PC(FRAME) \
+  (((FRAME)->signal_handler_caller \
+    ? sigtramp_saved_pc (FRAME) \
+    : read_memory_integer ((FRAME)->frame + 4, 4)) \
+   )
+
+
+/* tm-umax.h assumes a 32082 fpu. We have a 32382 fpu. */
+#undef REGISTER_NAMES
+#undef NUM_REGS
+#undef REGISTER_BYTES
+#undef  REGISTER_BYTE
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",	\
+ 			"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+			"sp", "fp", "pc", "ps",				\
+ 			"fsr",						\
+			"l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", "xx",			\
+ 			}
+
+#define NUM_REGS		29
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES \
+  ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \
+   + 8            * REGISTER_RAW_SIZE(LP0_REGNUM))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+/* This is a bit yuck. The even numbered double precision floating
+   point long registers occupy the same space as the even:odd numbered
+   single precision floating point registers, but the extra 32381 fpu
+   registers are at the end. Doing it this way is compatable for both
+   32081 and 32381 equiped machines. */
+
+#define REGISTER_BYTE(N) (((N) < LP0_REGNUM? (N)\
+			   : ((N) - LP0_REGNUM) & 1? (N) - 1 \
+			   : ((N) - LP0_REGNUM + FP0_REGNUM)) * 4)
+
diff --git a/gdb/config/ns32k/tm-ns32km3.h b/gdb/config/ns32k/tm-ns32km3.h
new file mode 100644
index 0000000..27d07d7
--- /dev/null
+++ b/gdb/config/ns32k/tm-ns32km3.h
@@ -0,0 +1,73 @@
+/* Macro definitions for ns532, Mach 3.0
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include common definitions for Mach3 systems */
+#include "nm-m3.h"
+
+/* Define offsets to access CPROC stack when it does not have
+ * a kernel thread.
+ */
+#define MACHINE_CPROC_SP_OFFSET 20
+#define MACHINE_CPROC_PC_OFFSET 16
+#define MACHINE_CPROC_FP_OFFSET 12
+
+#include <ns532/psl.h>
+#include <ns532/vmparam.h>
+
+/* Thread flavors used in re-setting the T bit.
+ * @@ this is also bad for cross debugging.
+ */
+#define TRACE_FLAVOR		NS532_THREAD_STATE
+#define TRACE_FLAVOR_SIZE	NS532_THREAD_STATE_COUNT
+#define TRACE_SET(x,state) \
+  	((struct ns532_thread_state *)state)->psr |= PSR_T
+#define TRACE_CLEAR(x,state) \
+  	((((struct ns532_thread_state *)state)->psr &= ~PSR_T), 1)
+
+/* we can do it */
+#define ATTACH_DETACH 1
+
+/* Address of end of stack space.
+ * for MACH, see <ns532/vmparam.h>
+ */
+#define STACK_END_ADDR USRSTACK
+
+#include "ns32k/tm-umax.h"
+
+/* tm-umax.h assumes a 32082 fpu. We have a 32382 fpu. */
+#undef REGISTER_NAMES
+#undef NUM_REGS
+#undef REGISTER_BYTES
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",	\
+ 			"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+			"sp", "fp", "pc", "ps",				\
+ 			"fsr",						\
+			"l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7", "xx",			\
+ 			}
+
+#define NUM_REGS		29
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES \
+  ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \
+   + 8            * REGISTER_RAW_SIZE(LP0_REGNUM))
diff --git a/gdb/config/ns32k/tm-umax.h b/gdb/config/ns32k/tm-umax.h
new file mode 100644
index 0000000..1fdfb2f
--- /dev/null
+++ b/gdb/config/ns32k/tm-umax.h
@@ -0,0 +1,370 @@
+/* Definitions to make GDB run on an encore under umax 4.2
+   Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is also included by tm-ns32km3.h, as well as being used by umax.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* Need to get function ends by adding this to epilogue address from .bf
+   record, not using x_fsize field.  */
+#define FUNCTION_EPILOGUE_SIZE 4
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)   				\
+{ register unsigned char op = read_memory_integer (pc, 1);	\
+  if (op == 0x82) { op = read_memory_integer (pc+2,1);  \
+  		    if ((op & 0x80) == 0) pc += 3;	\
+		    else if ((op & 0xc0) == 0x80) pc += 4;	\
+		    else pc += 6;			\
+		   }					\
+}
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+	read_memory_integer (read_register (SP_REGNUM), 4)
+
+/* Address of end of stack space.  */
+
+#ifndef STACK_END_ADDR
+#define STACK_END_ADDR (0xfffff000)
+#endif
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xf2}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+#if 0 /* Disable until fixed *correctly*.  */
+#ifndef INVALID_FLOAT
+#ifndef NaN
+#include <nan.h>
+#endif NaN
+
+/* Return 1 if P points to an invalid floating point value.  */
+/* Surely wrong for cross-debugging.  */
+#define INVALID_FLOAT(p, s) \
+	 ((s == sizeof (float))?	\
+		NaF (*(float *) p) :	\
+		NaD (*(double *) p))
+#endif /* INVALID_FLOAT */
+#endif
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS		25
+
+#define NUM_GENERAL_REGS	8
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",	\
+ 			"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+			"sp", "fp", "pc", "ps",				\
+ 			"fsr",						\
+			"l0", "l1", "l2", "l3", "xx",			\
+ 			}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define	R0_REGNUM 0		/* General register 0 */
+#define FP0_REGNUM 8		/* Floating point register 0 */
+#define SP_REGNUM 16		/* Contains address of top of stack */
+#define AP_REGNUM FP_REGNUM
+#define FP_REGNUM 17		/* Contains address of executing stack frame */
+#define PC_REGNUM 18		/* Contains program counter */
+#define PS_REGNUM 19		/* Contains processor status */
+#define FPS_REGNUM 20		/* Floating point status register */
+#define LP0_REGNUM 21		/* Double register 0 (same as FP0) */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES \
+  ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \
+   + 4            * REGISTER_RAW_SIZE(LP0_REGNUM))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \
+	LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+	(((N) < FP0_REGNUM) ?				\
+		builtin_type_int :			\
+		((N) < FP0_REGNUM + 8) ?		\
+			builtin_type_float :		\
+			((N) < LP0_REGNUM) ?		\
+				builtin_type_int :	\
+				builtin_type_double)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function.
+
+   On this machine this is a no-op, because gcc isn't used on it
+   yet.  So this calling convention is not used. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF+REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the ns32000 series, the frame's nominal address is the FP
+   value, and at that address is saved previous FP value as a 4-byte word.  */
+
+#define FRAME_CHAIN(thisframe)  \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+/* Compute base of arguments. */
+
+#define FRAME_ARGS_ADDRESS(fi)	\
+  ((ns32k_get_enter_addr ((fi)->pc) > 1) ? \
+	((fi)->frame) : (read_register (SP_REGNUM) - 4))
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Get the address of the enter opcode for this function, if it is active.
+   Returns positive address > 1 if pc is between enter/exit,
+   1 if pc before enter or after exit, 0 otherwise. */
+
+extern CORE_ADDR ns32k_get_enter_addr ();
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.
+   Encore's C compiler often reuses same area on stack for args,
+   so this will often not work properly.  If the arg names
+   are known, it's likely most of them will be printed. */
+
+#define FRAME_NUM_ARGS(numargs, fi)			\
+{ CORE_ADDR	pc;					\
+  CORE_ADDR	enter_addr;				\
+  unsigned int	insn;					\
+  unsigned int	addr_mode;				\
+  int width;						\
+							\
+  numargs = -1;						\
+  enter_addr = ns32k_get_enter_addr ((fi)->pc);		\
+  if (enter_addr > 0)					\
+    {							\
+      pc = (enter_addr == 1) ?				\
+	SAVED_PC_AFTER_CALL (fi) :			\
+	FRAME_SAVED_PC (fi);				\
+      insn = read_memory_integer (pc,2);		\
+      addr_mode = (insn >> 11) & 0x1f;			\
+      insn = insn & 0x7ff;				\
+      if ((insn & 0x7fc) == 0x57c &&			\
+		addr_mode == 0x14) /* immediate */	\
+	{						\
+	  if (insn == 0x57c) /* adjspb */		\
+  		width = 1;				\
+	  else if (insn == 0x57d) /* adjspw */		\
+  		width = 2;				\
+	  else if (insn == 0x57f) /* adjspd */		\
+  		width = 4;				\
+	  numargs = read_memory_integer (pc+2,width);	\
+	  if (width > 1)				\
+	    flip_bytes (&numargs, width);		\
+	  numargs = - sign_extend (numargs, width*8) / 4;\
+	}						\
+    }							\
+}
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	\
+{ 								\
+  register int	regmask, regnum;				\
+  int		localcount;					\
+  register CORE_ADDR	enter_addr;				\
+  register CORE_ADDR	next_addr;				\
+								\
+  memset (&(frame_saved_regs), '\0', sizeof (frame_saved_regs));	\
+  enter_addr = ns32k_get_enter_addr ((frame_info)->pc);		\
+  if (enter_addr > 1)						\
+    {								\
+      regmask = read_memory_integer (enter_addr+1, 1) & 0xff;	\
+      localcount = ns32k_localcount (enter_addr);		\
+      next_addr = (frame_info)->frame + localcount;		\
+      for (regnum = 0; regnum < 8; regnum++, regmask >>= 1)	\
+	(frame_saved_regs).regs[regnum] = (regmask & 1) ?	\
+					  (next_addr -= 4) : 0;	\
+      (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;\
+      (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;\
+      (frame_saved_regs).regs[FP_REGNUM] =			\
+		  (read_memory_integer ((frame_info)->frame, 4));\
+    }								\
+  else if (enter_addr == 1)					\
+    {								\
+      CORE_ADDR sp = read_register (SP_REGNUM);			\
+      (frame_saved_regs).regs[PC_REGNUM] = sp;			\
+      (frame_saved_regs).regs[SP_REGNUM] = sp + 4;		\
+    }								\
+}
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);\
+  register int regnum;				    \
+  sp = push_word (sp, read_register (PC_REGNUM));   \
+  sp = push_word (sp, read_register (FP_REGNUM));   \
+  write_register (FP_REGNUM, sp);		    \
+  for (regnum = 0; regnum < 8; regnum++)  \
+    sp = push_word (sp, read_register (regnum));    \
+  write_register (SP_REGNUM, sp);  			\
+}
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register struct frame_info *frame = get_current_frame ();	 \
+  register CORE_ADDR fp;					 \
+  register int regnum;						 \
+  struct frame_saved_regs fsr;					 \
+  struct frame_info *fi;						 \
+  fp = frame->frame;						 \
+  get_frame_saved_regs (frame, &fsr);				 \
+  for (regnum = 0; regnum < 8; regnum++)			 \
+    if (fsr.regs[regnum])					 \
+      write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));	 \
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));   \
+  write_register (SP_REGNUM, fp + 8);				 \
+  flush_cached_frames ();					 \
+}
+
+/* This sequence of words is the instructions
+     enter	0xff,0		82 ff 00
+     jsr	@0x00010203	7f ae c0 01 02 03
+     adjspd	0x69696969	7f a5 01 02 03 04
+     bpt			f2
+   Note this is 16 bytes.  */
+
+#define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 }
+
+#define CALL_DUMMY_START_OFFSET	3
+#define CALL_DUMMY_LENGTH	16
+#define CALL_DUMMY_ADDR		5
+#define CALL_DUMMY_NARGS	11
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   		\
+{								\
+	int	flipped;					\
+	flipped = fun | 0xc0000000;				\
+	flip_bytes (&flipped, 4);				\
+	*((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped;	\
+	flipped = - nargs * 4;					\
+	flip_bytes (&flipped, 4);				\
+	*((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped;	\
+}
diff --git a/gdb/config/ns32k/umax.mh b/gdb/config/ns32k/umax.mh
new file mode 100644
index 0000000..e43f6ec
--- /dev/null
+++ b/gdb/config/ns32k/umax.mh
@@ -0,0 +1,5 @@
+# Host: Encore running umax 4.2
+XDEPFILES= umax-xdep.o
+XM_FILE= xm-umax.h
+NAT_FILE= nm-umax.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o
diff --git a/gdb/config/ns32k/umax.mt b/gdb/config/ns32k/umax.mt
new file mode 100644
index 0000000..4c9169d
--- /dev/null
+++ b/gdb/config/ns32k/umax.mt
@@ -0,0 +1,3 @@
+# Target: Encore running umax 4.2
+TDEPFILES= ns32k-tdep.o
+TM_FILE= tm-umax.h
diff --git a/gdb/config/ns32k/xm-merlin.h b/gdb/config/ns32k/xm-merlin.h
new file mode 100644
index 0000000..b8329f6
--- /dev/null
+++ b/gdb/config/ns32k/xm-merlin.h
@@ -0,0 +1,65 @@
+/* Definitions to make GDB run on a merlin under utek 2.1
+   Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <machine/reg.h>
+
+/* This machine doesn't have the siginterrupt call.  */
+#define NO_SIGINTERRUPT
+
+/* Under Utek, a ptrace'd process can be the only active process for
+   an executable.  Therefore instead of /bin/sh use gdb-sh (which should
+   just be a copy of /bin/sh which is world readable and writeable).  */
+/* FIXME: name should be passed in from Makefile so it can use prefix.  */
+#define SHELL_FILE "/usr/local/lib/gdb-sh"
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0xfef000)
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+{ 									\
+  switch (regno) {							\
+  case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:	\
+	addr = blockend + (R0 - regno) * sizeof (int); break;		\
+  case PC_REGNUM:							\
+  	addr = blockend + PC * sizeof (int); break;			\
+  case SP_REGNUM:							\
+  	addr = blockend + SP * sizeof (int); break;			\
+  case FP_REGNUM:							\
+  	addr = blockend + FP * sizeof (int); break;			\
+  case PS_REGNUM:							\
+  	addr = blockend + 12 * sizeof (int); break;			\
+  case FPS_REGNUM:							\
+  	addr = 108; break;						\
+  case FP0_REGNUM + 0: case FP0_REGNUM + 1:				\
+  case FP0_REGNUM + 2: case FP0_REGNUM + 3: 				\
+  case FP0_REGNUM + 4: case FP0_REGNUM + 5: 				\
+  case FP0_REGNUM + 6: case FP0_REGNUM + 7: 				\
+  	addr = 76 + (regno - FP0_REGNUM) * sizeof (float); break;	\
+  case LP0_REGNUM + 0: case LP0_REGNUM + 1:				\
+  case LP0_REGNUM + 2: case LP0_REGNUM + 3:				\
+  	addr = 76 + (regno - LP0_REGNUM) * sizeof (double); break;	\
+  default:								\
+  	printf ("bad argument to REGISTER_U_ADDR %d\n", regno);		\
+	abort ();							\
+  }									\
+}
diff --git a/gdb/config/ns32k/xm-nbsd.h b/gdb/config/ns32k/xm-nbsd.h
new file mode 100644
index 0000000..db8c0bc
--- /dev/null
+++ b/gdb/config/ns32k/xm-nbsd.h
@@ -0,0 +1,21 @@
+/* Parameters for execution on a ns32k running NetBSD, for GDB.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic NetBSD host definitions. */
+#include "xm-nbsd.h"
diff --git a/gdb/config/ns32k/xm-ns32km3.h b/gdb/config/ns32k/xm-ns32km3.h
new file mode 100644
index 0000000..3d08e67
--- /dev/null
+++ b/gdb/config/ns32k/xm-ns32km3.h
@@ -0,0 +1,23 @@
+/* Definitions to make GDB run on Mach 3 on an National ns32k
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* Do implement the attach and detach commands.  */
+#define ATTACH_DETACH	1
diff --git a/gdb/config/ns32k/xm-umax.h b/gdb/config/ns32k/xm-umax.h
new file mode 100644
index 0000000..1bb0071
--- /dev/null
+++ b/gdb/config/ns32k/xm-umax.h
@@ -0,0 +1,26 @@
+/* Definitions to make GDB run on an encore under umax 4.2
+   Copyright 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#define HAVE_WAIT_STRUCT
+
+/* Doesn't have siginterupt.  */
+#define NO_SIGINTERRUPT
+
diff --git a/gdb/config/pa/hppabsd.mh b/gdb/config/pa/hppabsd.mh
new file mode 100644
index 0000000..dfd2d4c
--- /dev/null
+++ b/gdb/config/pa/hppabsd.mh
@@ -0,0 +1,7 @@
+# Host: Hewlett-Packard PA-RISC machine, running BSD
+XDEPFILES=  ser-tcp.o
+XM_FILE= xm-hppab.h
+NAT_FILE= nm-hppab.h
+NATDEPFILES= hppab-nat.o corelow.o core-aout.o inftarg.o fork-child.o somread.o infptrace.o hp-psymtab-read.o hp-symtab-read.o somsolib.o
+
+GDBSERVER_DEPFILES= low-hppabsd.o
diff --git a/gdb/config/pa/hppabsd.mt b/gdb/config/pa/hppabsd.mt
new file mode 100644
index 0000000..0fc0380
--- /dev/null
+++ b/gdb/config/pa/hppabsd.mt
@@ -0,0 +1,3 @@
+# Target: HP PA-RISC running bsd
+TDEPFILES= hppa-tdep.o
+TM_FILE= tm-hppab.h
diff --git a/gdb/config/pa/hppahpux.mh b/gdb/config/pa/hppahpux.mh
new file mode 100644
index 0000000..0d30244
--- /dev/null
+++ b/gdb/config/pa/hppahpux.mh
@@ -0,0 +1,9 @@
+# Host: Hewlett-Packard PA-RISC machine, running HPUX
+
+XM_FILE= xm-hppah.h
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-hppah.h
+NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o somread.o infptrace.o hp-psymtab-read.o hp-symtab-read.o somsolib.o
+
+HOST_IPC=-DBSD_IPC -DPOSIX_WAIT
diff --git a/gdb/config/pa/hppahpux.mt b/gdb/config/pa/hppahpux.mt
new file mode 100644
index 0000000..dddb3f5
--- /dev/null
+++ b/gdb/config/pa/hppahpux.mt
@@ -0,0 +1,3 @@
+# Target: HP PA-RISC running hpux
+TDEPFILES= hppa-tdep.o
+TM_FILE= tm-hppah.h
diff --git a/gdb/config/pa/hppaosf.mh b/gdb/config/pa/hppaosf.mh
new file mode 100644
index 0000000..6bde9c0
--- /dev/null
+++ b/gdb/config/pa/hppaosf.mh
@@ -0,0 +1,9 @@
+# Host: Hewlett-Packard PA-RISC machine, running BSD
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-hppab.h
+NAT_FILE= nm-hppao.h
+NATDEPFILES= fork-child.o m3-nat.o hppam3-nat.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o
+NAT_CLIBS= -lmachid -lnetname -lmach
+
+GDBSERVER_DEPFILES= low-hppabsd.o
+
diff --git a/gdb/config/pa/hppaosf.mt b/gdb/config/pa/hppaosf.mt
new file mode 100644
index 0000000..6754023
--- /dev/null
+++ b/gdb/config/pa/hppaosf.mt
@@ -0,0 +1,3 @@
+# Target: HP PA-RISC running OSF1
+TDEPFILES= hppa-tdep.o
+TM_FILE= tm-hppao.h
diff --git a/gdb/config/pa/hppapro.mt b/gdb/config/pa/hppapro.mt
new file mode 100644
index 0000000..4851b18
--- /dev/null
+++ b/gdb/config/pa/hppapro.mt
@@ -0,0 +1,3 @@
+# Target: PA based debug monitor
+TDEPFILES= hppa-tdep.o op50-rom.o w89k-rom.o monitor.o xmodem.o dsrec.o
+TM_FILE= tm-pro.h
diff --git a/gdb/config/pa/hpux1020.mh b/gdb/config/pa/hpux1020.mh
new file mode 100644
index 0000000..28eae11
--- /dev/null
+++ b/gdb/config/pa/hpux1020.mh
@@ -0,0 +1,11 @@
+# Host: Hewlett-Packard PA-RISC machine, running HPUX 10.20
+
+MH_CFLAGS = -D__HP_CURSES
+
+XM_FILE= xm-hppah.h
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-hppah.h
+NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o infptrace.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o
+
+HOST_IPC=-DBSD_IPC -DPOSIX_WAIT
diff --git a/gdb/config/pa/hpux1020.mt b/gdb/config/pa/hpux1020.mt
new file mode 100644
index 0000000..a856d8c
--- /dev/null
+++ b/gdb/config/pa/hpux1020.mt
@@ -0,0 +1,3 @@
+# Target: HP PA-RISC running hpux
+TDEPFILES= hppa-tdep.o remote-pa.o somsolib.o corelow.o
+TM_FILE= tm-hppah.h
diff --git a/gdb/config/pa/hpux1100.mh b/gdb/config/pa/hpux1100.mh
new file mode 100644
index 0000000..10fbd7e
--- /dev/null
+++ b/gdb/config/pa/hpux1100.mh
@@ -0,0 +1,11 @@
+# Host: Hewlett-Packard PA-RISC machine, running HPUX 11.00
+
+MH_CFLAGS = -D__HP_CURSES
+
+XM_FILE= xm-hppah.h
+XDEPFILES= ser-tcp.o
+
+NAT_FILE= nm-hppah11.h
+NATDEPFILES= hppah-nat.o corelow.o core-aout.o inftarg.o fork-child.o infttrace.o somread.o hp-psymtab-read.o hp-symtab-read.o somsolib.o
+
+HOST_IPC=-DBSD_IPC -DPOSIX_WAIT
diff --git a/gdb/config/pa/hpux1100.mt b/gdb/config/pa/hpux1100.mt
new file mode 100644
index 0000000..405f73a
--- /dev/null
+++ b/gdb/config/pa/hpux1100.mt
@@ -0,0 +1,3 @@
+# Target: HP PA-RISC running HPUX 11.00
+TDEPFILES= hppa-tdep.o remote-pa.o somsolib.o
+TM_FILE= tm-hppah.h
diff --git a/gdb/config/pa/nm-hppab.h b/gdb/config/pa/nm-hppab.h
new file mode 100644
index 0000000..6b63674
--- /dev/null
+++ b/gdb/config/pa/nm-hppab.h
@@ -0,0 +1,135 @@
+/* HPPA PA-RISC machine native support for BSD, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "somsolib.h"
+
+#define U_REGS_OFFSET 0
+
+#define KERNEL_U_ADDR 0
+
+/* What a coincidence! */
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
+
+/* 3rd argument to ptrace is supposed to be a caddr_t.  */
+
+#define	PTRACE_ARG3_TYPE caddr_t
+
+/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
+   with five arguments, so programs written for normal ptrace lose.  */
+#define FIVE_ARG_PTRACE
+
+
+/* This macro defines the register numbers (from REGISTER_NAMES) that
+   are effectively unavailable to the user through ptrace().  It allows
+   us to include the whole register set in REGISTER_NAMES (inorder to
+   better support remote debugging).  If it is used in
+   fetch/store_inferior_registers() gdb will not complain about I/O errors
+   on fetching these registers.  If all registers in REGISTER_NAMES
+   are available, then return false (0).  */
+
+#define CANNOT_STORE_REGISTER(regno)            \
+                   ((regno) == 0) ||     \
+                   ((regno) == PCSQ_HEAD_REGNUM) || \
+                   ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) ||  \
+                   ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
+
+/* fetch_inferior_registers is in hppab-nat.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* attach/detach works to some extent under BSD and HPUX.  So long
+   as the process you're attaching to isn't blocked waiting on io,
+   blocked waiting on a signal, or in a system call things work 
+   fine.  (The problems in those cases are related to the fact that
+   the kernel can't provide complete register information for the
+   target process...  Which really pisses off GDB.)  */
+
+#define ATTACH_DETACH
+
+/* The PA-BSD kernel has support for using the data memory break bit
+   to implement fast watchpoints.
+
+   Watchpoints on the PA act much like traditional page protection
+   schemes, but with some notable differences.
+
+   First, a special bit in the page table entry is used to cause
+   a trap when a specific page is written to.  This avoids having
+   to overload watchpoints on the page protection bits.  This makes
+   it possible for the kernel to easily decide if a trap was caused
+   by a watchpoint or by the user writing to protected memory and can
+   signal the user program differently in each case.  
+   
+   Second, the PA has a bit in the processor status word which causes
+   data memory breakpoints (aka watchpoints) to be disabled for a single
+   instruction.  This bit can be used to avoid the overhead of unprotecting
+   and reprotecting pages when it becomes necessary to step over a watchpoint.
+
+
+   When the kernel receives a trap indicating a write to a page which
+   is being watched, the kernel performs a couple of simple actions.  First
+   is sets the magic "disable memory breakpoint" bit in the processor
+   status word, it then sends a SIGTRAP to the process which caused the
+   trap.
+
+   GDB will take control and catch the signal for the inferior.  GDB then
+   examines the PSW-X bit to determine if the SIGTRAP was caused by a 
+   watchpoint firing.  If so GDB single steps the inferior over the
+   instruction which caused the watchpoint to trigger (note because the
+   kernel disabled the data memory break bit for one instruction no trap
+   will be taken!).  GDB will then determines the appropriate action to
+   take.  (this may include restarting the inferior if the watchpoint
+   fired because of a write to an address on the same page as a watchpoint,
+   but no write to the watched address occured).  */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS	/* Enable the code in procfs.c */
+
+/* The PA can watch any number of locations, there's no need for it to reject
+   anything (generic routines already check that all intermediates are
+   in memory).  */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+	((type) == bp_hardware_watchpoint)
+
+/* When a hardware watchpoint fires off the PC will be left at the
+   instruction which caused the watchpoint.  It will be necessary for
+   GDB to step over the watchpoint.
+
+   On a PA running BSD, it is trivial to identify when it will be
+   necessary to step over a hardware watchpoint as we can examine
+   the PSW-X bit.  If the bit is on, then we trapped because of a 
+   watchpoint, else we trapped for some other reason.  */
+#define STOPPED_BY_WATCHPOINT(W) \
+  ((W).kind == TARGET_WAITKIND_STOPPED \
+   && (W).value.sig == TARGET_SIGNAL_TRAP \
+   && ((int) read_register (IPSW_REGNUM) & 0x00100000))
+
+/* The PA can single step over a watchpoint if the kernel has set the
+   "X" bit in the processor status word (disable data memory breakpoint
+   for one instruction).
+
+   The kernel will always set this bit before notifying the inferior
+   that it hit a watchpoint.  Thus, the inferior can single step over
+   the instruction which caused the watchpoint to fire.  This avoids
+   the traditional need to disable the watchpoint, step the inferior,
+   then enable the watchpoint again.  */
+#define HAVE_STEPPABLE_WATCHPOINT
+
+/* Use these macros for watchpoint insertion/deletion.  */
+/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */
+#define target_insert_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 1)
+#define target_remove_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 0)
diff --git a/gdb/config/pa/nm-hppah.h b/gdb/config/pa/nm-hppah.h
new file mode 100644
index 0000000..0f5ef01
--- /dev/null
+++ b/gdb/config/pa/nm-hppah.h
@@ -0,0 +1,281 @@
+/* Native support for HPPA-RISC machine running HPUX, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define U_REGS_OFFSET 0
+
+#define KERNEL_U_ADDR 0
+
+/* What a coincidence! */
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
+
+/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
+   with five arguments, so programs written for normal ptrace lose.  */
+#define FIVE_ARG_PTRACE
+
+/* We need to figure out where the text region is so that we use the
+   appropriate ptrace operator to manipulate text.  Simply reading/writing
+   user space will crap out HPUX.  */
+#define NEED_TEXT_START_END 1
+
+/* This macro defines the register numbers (from REGISTER_NAMES) that
+   are effectively unavailable to the user through ptrace().  It allows
+   us to include the whole register set in REGISTER_NAMES (inorder to
+   better support remote debugging).  If it is used in
+   fetch/store_inferior_registers() gdb will not complain about I/O errors
+   on fetching these registers.  If all registers in REGISTER_NAMES
+   are available, then return false (0).  */
+
+#define CANNOT_STORE_REGISTER(regno)            \
+                   ((regno) == 0) ||     \
+                   ((regno) == PCSQ_HEAD_REGNUM) || \
+                   ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) ||  \
+                   ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
+
+/* In hppah-nat.c: */
+#define FETCH_INFERIOR_REGISTERS
+#define CHILD_XFER_MEMORY
+#define CHILD_POST_FOLLOW_INFERIOR_BY_CLONE
+#define CHILD_POST_FOLLOW_VFORK
+
+/* While this is for use by threaded programs, it doesn't appear
+ * to hurt non-threaded ones.  This is used in infrun.c: */
+#define PREPARE_TO_PROCEED() hppa_prepare_to_proceed()
+extern int hppa_prepare_to_proceed PARAMS(( void ));
+
+/* In infptrace.c or infttrace.c: */
+#define CHILD_PID_TO_EXEC_FILE
+#define CHILD_POST_STARTUP_INFERIOR
+#define CHILD_ACKNOWLEDGE_CREATED_INFERIOR
+#define CHILD_INSERT_FORK_CATCHPOINT
+#define CHILD_REMOVE_FORK_CATCHPOINT
+#define CHILD_INSERT_VFORK_CATCHPOINT
+#define CHILD_REMOVE_VFORK_CATCHPOINT
+#define CHILD_HAS_FORKED
+#define CHILD_HAS_VFORKED
+#define CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC
+#define CHILD_INSERT_EXEC_CATCHPOINT
+#define CHILD_REMOVE_EXEC_CATCHPOINT
+#define CHILD_HAS_EXECD
+#define CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL
+#define CHILD_HAS_SYSCALL_EVENT
+#define CHILD_POST_ATTACH
+#define CHILD_THREAD_ALIVE
+
+#define REQUIRE_ATTACH(pid) hppa_require_attach(pid)
+extern int hppa_require_attach PARAMS ((int));
+
+#define REQUIRE_DETACH(pid,signal) hppa_require_detach(pid,signal)
+extern int hppa_require_detach PARAMS ((int,int));
+
+/* So we can cleanly use code in infptrace.c.  */
+#define PT_KILL		PT_EXIT
+#define PT_STEP		PT_SINGLE
+#define PT_CONTINUE	PT_CONTIN
+
+/* FIXME HP MERGE : Previously, PT_RDUAREA. this is actually fixed
+   in gdb-hp-snapshot-980509  */
+#define PT_READ_U	PT_RUAREA
+#define PT_WRITE_U	PT_WUAREA
+#define PT_READ_I	PT_RIUSER
+#define PT_READ_D	PT_RDUSER
+#define PT_WRITE_I	PT_WIUSER
+#define PT_WRITE_D	PT_WDUSER
+
+/* attach/detach works to some extent under BSD and HPUX.  So long
+   as the process you're attaching to isn't blocked waiting on io,
+   blocked waiting on a signal, or in a system call things work 
+   fine.  (The problems in those cases are related to the fact that
+   the kernel can't provide complete register information for the
+   target process...  Which really pisses off GDB.)  */
+
+#define ATTACH_DETACH
+
+/* In infptrace or infttrace.c: */
+
+/* Starting with HP-UX 10.30, support is provided (in the form of
+   ttrace requests) for memory-protection-based hardware watchpoints.
+
+   The 10.30 implementation of these functions reside in infttrace.c.
+
+   Stubs of these functions will be provided in infptrace.c, so that
+   10.20 will at least link.  However, the "can I use a fast watchpoint?"
+   query will always return "No" for 10.20. */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* The PA can watch any number of locations (generic routines already check
+   that all intermediates are in watchable memory locations). */
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+        hppa_can_use_hw_watchpoint(type, cnt, ot)
+
+/* The PA can also watch memory regions of arbitrary size, since we're using
+   a page-protection scheme.  (On some targets, apparently watch registers
+   are used, which can only accomodate regions of REGISTER_SIZE.) */
+#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \
+        (1)
+
+/* However, some addresses may not be profitable to use hardware to watch,
+   or may be difficult to understand when the addressed object is out of
+   scope, and hence should be unwatched.  On some targets, this may have
+   severe performance penalties, such that we might as well use regular
+   watchpoints, and save (possibly precious) hardware watchpoints for other
+   locations.
+
+   On HP-UX, we choose not to watch stack-based addresses, because
+
+   [1] Our implementation relies on page protection traps.  The granularity
+   of these is large and so can generate many false hits, which are expensive
+   to respond to.
+
+   [2] Watches of "*p" where we may not know the symbol that p points to,
+   make it difficult to know when the addressed object is out of scope, and
+   hence shouldn't be watched.  Page protection that isn't removed when the
+   addressed object is out of scope will either degrade execution speed
+   (false hits) or give false triggers (when the address is recycled by
+   other calls).
+
+   Since either of these points results in a slow-running inferior, we might
+   as well use normal watchpoints, aka single-step & test. */
+#define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) \
+        hppa_range_profitable_for_hw_watchpoint(pid, start, (LONGEST)(len))
+
+/* On HP-UX, we're using page-protection to implement hardware watchpoints.
+   When an instruction attempts to write to a write-protected memory page,
+   a SIGBUS is raised.  At that point, the write has not actually occurred.
+
+   We must therefore remove page-protections; single-step the inferior (to
+   allow the write to happen); restore page-protections; and check whether
+   any watchpoint triggered.
+
+   If none did, then the write was to a "nearby" location that just happens
+   to fall on the same page as a watched location, and so can be ignored.
+
+   The only intended client of this macro is wait_for_inferior(), in infrun.c.
+   When HAVE_NONSTEPPABLE_WATCHPOINT is true, that function will take care
+   of the stepping & etc. */
+
+#define STOPPED_BY_WATCHPOINT(W) \
+        ((W.kind == TARGET_WAITKIND_STOPPED) && \
+         (stop_signal == TARGET_SIGNAL_BUS) && \
+         ! stepped_after_stopped_by_watchpoint && \
+         bpstat_have_active_hw_watchpoints ())
+
+/* When a hardware watchpoint triggers, we'll move the inferior past it
+   by removing all eventpoints; stepping past the instruction that caused
+   the trigger; reinserting eventpoints; and checking whether any watched
+   location changed. */
+#define HAVE_NONSTEPPABLE_WATCHPOINT
+
+/* Our implementation of "hardware" watchpoints uses memory page-protection
+   faults.  However, HP-UX has unfortunate interactions between these and
+   system calls; basically, it's unsafe to have page protections on when a
+   syscall is running.  Therefore, we also ask for notification of syscall
+   entries and returns.  When the inferior enters a syscall, we disable
+   h/w watchpoints.  When the inferior returns from a syscall, we reenable
+   h/w watchpoints.
+
+   infptrace.c supplies dummy versions of these; infttrace.c is where the
+   meaningful implementations are.
+   */
+#define TARGET_ENABLE_HW_WATCHPOINTS(pid) \
+        hppa_enable_page_protection_events (pid)
+extern void  hppa_enable_page_protection_events PARAMS ((int));
+
+#define TARGET_DISABLE_HW_WATCHPOINTS(pid) \
+        hppa_disable_page_protection_events (pid)
+extern void  hppa_disable_page_protection_events PARAMS ((int));
+
+/* Use these macros for watchpoint insertion/deletion.  */
+#define target_insert_watchpoint(addr, len, type) \
+        hppa_insert_hw_watchpoint (inferior_pid, addr, (LONGEST)(len), type)
+
+#define target_remove_watchpoint(addr, len, type) \
+        hppa_remove_hw_watchpoint (inferior_pid, addr, (LONGEST)(len), type)
+
+/* We call our k-thread processes "threads", rather
+ * than processes.  So we need a new way to print
+ * the string.  Code is in hppah-nat.c.
+ */
+#define target_pid_to_str( pid ) \
+        hppa_pid_to_str( pid )
+extern char * hppa_pid_to_str PARAMS ((pid_t));
+
+#define target_tid_to_str( pid ) \
+        hppa_tid_to_str( pid )
+extern char * hppa_tid_to_str PARAMS ((pid_t));
+
+/* For this, ID can be either a process or thread ID, and the function
+   will describe it appropriately, returning the description as a printable
+   string.
+
+   The function that implements this macro is defined in infptrace.c and
+   infttrace.c.
+   */
+#define target_pid_or_tid_to_str(ID) \
+        hppa_pid_or_tid_to_str (ID)
+extern char * hppa_pid_or_tid_to_str PARAMS ((pid_t));
+
+/* This is used when handling events caused by a call to vfork().  On ptrace-
+   based HP-UXs, when you resume the vforked child, the parent automagically
+   begins running again.  To prevent this runaway, this function is used.
+
+   Note that for vfork on HP-UX, we receive three events of interest:
+
+   1. the vfork event for the new child process
+   2. the exit or exec event of the new child process (actually, you get
+      two exec events on ptrace-based HP-UXs)
+   3. the vfork event for the original parent process
+
+   The first is always received first.  The other two may be received in any
+   order; HP-UX doesn't guarantee an order.
+   */
+#define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) \
+        hppa_ensure_vforking_parent_remains_stopped (PID)
+extern void  hppa_ensure_vforking_parent_remains_stopped PARAMS((int));
+
+/* This is used when handling events caused by a call to vfork().
+
+   On ttrace-based HP-UXs, the parent vfork and child exec arrive more or less
+   together.  That is, you could do two wait()s without resuming either parent
+   or child, and get both events.
+
+   On ptrace-based HP-UXs, you must resume the child after its exec event is
+   delivered or you won't get the parent's vfork.  I.e., you can't just wait()
+   and get the parent vfork, after receiving the child exec.
+   */
+#define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() \
+        hppa_resume_execd_vforking_child_to_get_parent_vfork ()
+extern int  hppa_resume_execd_vforking_child_to_get_parent_vfork PARAMS ((void));
+
+#ifdef HAVE_HPUX_THREAD_SUPPORT
+
+#ifdef __STDC__
+struct objfile;
+#endif
+
+void hpux_thread_new_objfile PARAMS ((struct objfile *objfile));
+#define target_new_objfile(OBJFILE) hpux_thread_new_objfile (OBJFILE)
+
+extern char *hpux_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) hpux_pid_to_str (PID)
+
+#endif /* HAVE_HPUX_THREAD_SUPPORT */
+
+#define HPUXHPPA
diff --git a/gdb/config/pa/nm-hppah11.h b/gdb/config/pa/nm-hppah11.h
new file mode 100644
index 0000000..7a73c24
--- /dev/null
+++ b/gdb/config/pa/nm-hppah11.h
@@ -0,0 +1,22 @@
+/* Native support for HPPA-RISC machine running HPUX 11.x, for GDB.
+   Copyright 1998 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define GDB_NATIVE_HPUX_11
+
+#include "pa/nm-hppah.h"
diff --git a/gdb/config/pa/nm-hppao.h b/gdb/config/pa/nm-hppao.h
new file mode 100644
index 0000000..a09dfd1
--- /dev/null
+++ b/gdb/config/pa/nm-hppao.h
@@ -0,0 +1,56 @@
+/* HPPA PA-RISC machine native support for Lites, for GDB.
+   Copyright 1995 Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "nm-m3.h"
+#define U_REGS_OFFSET 0
+
+#define KERNEL_U_ADDR 0
+
+/* What a coincidence! */
+#define REGISTER_U_ADDR(addr, blockend, regno)				\
+{ addr = (int)(blockend) + REGISTER_BYTE (regno);}
+
+/* This macro defines the register numbers (from REGISTER_NAMES) that
+   are effectively unavailable to the user through ptrace().  It allows
+   us to include the whole register set in REGISTER_NAMES (inorder to
+   better support remote debugging).  If it is used in
+   fetch/store_inferior_registers() gdb will not complain about I/O errors
+   on fetching these registers.  If all registers in REGISTER_NAMES
+   are available, then return false (0).  */
+
+#define CANNOT_STORE_REGISTER(regno)            \
+                   ((regno) == 0) ||     \
+                   ((regno) == PCSQ_HEAD_REGNUM) || \
+                   ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) ||  \
+                   ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
+
+/* fetch_inferior_registers is in hppab-nat.c.  */
+#define FETCH_INFERIOR_REGISTERS
+
+/* attach/detach works to some extent under BSD and HPUX.  So long
+   as the process you're attaching to isn't blocked waiting on io,
+   blocked waiting on a signal, or in a system call things work 
+   fine.  (The problems in those cases are related to the fact that
+   the kernel can't provide complete register information for the
+   target process...  Which really pisses off GDB.)  */
+
+#define ATTACH_DETACH
+
+#define EMULATOR_BASE 0x90100000
+#define EMULATOR_END  0x90200000
diff --git a/gdb/config/pa/tm-hppa.h b/gdb/config/pa/tm-hppa.h
new file mode 100644
index 0000000..559534a
--- /dev/null
+++ b/gdb/config/pa/tm-hppa.h
@@ -0,0 +1,788 @@
+/* Parameters for execution on any Hewlett-Packard PA-RISC machine.
+   Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1995
+   Free Software Foundation, Inc. 
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Forward declarations of some types we use in prototypes */
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct value;
+struct type;
+struct inferior_status;
+#endif
+
+/* Target system byte order. */
+
+#define	TARGET_BYTE_ORDER	BIG_ENDIAN
+
+/* By default assume we don't have to worry about software floating point.  */
+#ifndef SOFT_FLOAT
+#define SOFT_FLOAT 0
+#endif
+
+/* Get at various relevent fields of an instruction word. */
+
+#define MASK_5 0x1f
+#define MASK_11 0x7ff
+#define MASK_14 0x3fff
+#define MASK_21 0x1fffff
+
+/* This macro gets bit fields using HP's numbering (MSB = 0) */
+#ifndef GET_FIELD
+#define GET_FIELD(X, FROM, TO) \
+  ((X) >> (31 - (TO)) & ((1 << ((TO) - (FROM) + 1)) - 1))
+#endif
+
+/* Watch out for NaNs */
+
+#define IEEE_FLOAT
+
+/* On the PA, any pass-by-value structure > 8 bytes is actually
+   passed via a pointer regardless of its type or the compiler
+   used.  */
+
+#define REG_STRUCT_HAS_ADDR(gcc_p,type) \
+  (TYPE_LENGTH (type) > 8)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+     
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc) pc = skip_prologue (pc)
+extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR));
+
+/* If PC is in some function-call trampoline code, return the PC
+   where the function itself actually starts.  If not, return NULL.  */
+
+#define	SKIP_TRAMPOLINE_CODE(pc) skip_trampoline_code (pc, NULL)
+extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *));
+
+/* Return non-zero if we are in an appropriate trampoline. */
+
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \
+   in_solib_call_trampoline (pc, name)
+extern int in_solib_call_trampoline PARAMS ((CORE_ADDR, char *));
+
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc, name) \
+  in_solib_return_trampoline (pc, name)
+extern int in_solib_return_trampoline PARAMS ((CORE_ADDR, char *));
+
+/* Immediately after a function call, return the saved pc.
+   Can't go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#undef	SAVED_PC_AFTER_CALL
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call (frame)
+extern CORE_ADDR saved_pc_after_call PARAMS ((struct frame_info *));
+
+/* Stack grows upward */
+#define INNER_THAN(lhs,rhs) ((lhs) > (rhs))
+
+/* elz: adjust the quantity to the next highest value which is 64-bit aligned.
+   This is used in valops.c, when the sp is adjusted.
+   On hppa the sp must always be kept 64-bit aligned*/
+
+#define STACK_ALIGN(arg) ( ((arg)%8) ? (((arg)+7)&-8) : (arg))
+#define NO_EXTRA_ALIGNMENT_NEEDED 1 
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0x00, 0x01, 0x00, 0x04}
+#define BREAKPOINT32 0x10004
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.
+
+   Not on the PA-RISC */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Sometimes we may pluck out a minimal symbol that has a negative
+   address.
+
+   An example of this occurs when an a.out is linked against a foo.sl.
+   The foo.sl defines a global bar(), and the a.out declares a signature
+   for bar().  However, the a.out doesn't directly call bar(), but passes
+   its address in another call.
+
+   If you have this scenario and attempt to "break bar" before running,
+   gdb will find a minimal symbol for bar() in the a.out.  But that
+   symbol's address will be negative.  What this appears to denote is
+   an index backwards from the base of the procedure linkage table (PLT)
+   into the data linkage table (DLT), the end of which is contiguous
+   with the start of the PLT.  This is clearly not a valid address for
+   us to set a breakpoint on.
+
+   Note that one must be careful in how one checks for a negative address.
+   0xc0000000 is a legitimate address of something in a shared text
+   segment, for example.  Since I don't know what the possible range
+   is of these "really, truly negative" addresses that come from the
+   minimal symbols, I'm resorting to the gross hack of checking the
+   top byte of the address for all 1's.  Sigh.
+   */
+#define PC_REQUIRES_RUN_BEFORE_USE(pc) \
+  (! target_has_stack && (pc & 0xFF000000))
+
+/* return instruction is bv r0(rp) or bv,n r0(rp)*/
+
+#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 4) | 0x2) == 0xE840C002)
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS 128
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.
+   They are in rows of eight entries  */
+
+#define REGISTER_NAMES	\
+ {"flags",  "r1",      "rp",      "r3",    "r4",     "r5",      "r6",     "r7",    \
+  "r8",     "r9",      "r10",     "r11",   "r12",    "r13",     "r14",    "r15",   \
+  "r16",    "r17",     "r18",     "r19",   "r20",    "r21",     "r22",    "r23",   \
+  "r24",    "r25",     "r26",     "dp",    "ret0",   "ret1",    "sp",     "r31",   \
+  "sar",    "pcoqh",   "pcsqh",   "pcoqt", "pcsqt",  "eiem",    "iir",    "isr",   \
+  "ior",    "ipsw",    "goto",    "sr4",   "sr0",    "sr1",     "sr2",    "sr3",   \
+  "sr5",    "sr6",     "sr7",     "cr0",   "cr8",    "cr9",     "ccr",    "cr12",  \
+  "cr13",   "cr24",    "cr25",    "cr26",  "mpsfu_high","mpsfu_low","mpsfu_ovflo","pad",\
+  "fpsr",    "fpe1",   "fpe2",    "fpe3",  "fpe4",   "fpe5",    "fpe6",   "fpe7",  \
+  "fr4",     "fr4R",   "fr5",     "fr5R",  "fr6",    "fr6R",    "fr7",    "fr7R",  \
+  "fr8",     "fr8R",   "fr9",     "fr9R",  "fr10",   "fr10R",   "fr11",   "fr11R", \
+  "fr12",    "fr12R",  "fr13",    "fr13R", "fr14",   "fr14R",   "fr15",   "fr15R", \
+  "fr16",    "fr16R",  "fr17",    "fr17R", "fr18",   "fr18R",   "fr19",   "fr19R", \
+  "fr20",    "fr20R",  "fr21",    "fr21R", "fr22",   "fr22R",   "fr23",   "fr23R", \
+  "fr24",    "fr24R",  "fr25",    "fr25R", "fr26",   "fr26R",   "fr27",   "fr27R", \
+  "fr28",    "fr28R",  "fr29",    "fr29R", "fr30",   "fr30R",   "fr31",   "fr31R"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define R0_REGNUM 0		/* Doesn't actually exist, used as base for
+				   other r registers.  */
+#define FLAGS_REGNUM 0		/* Various status flags */
+#define RP_REGNUM 2		/* return pointer */
+#define FP_REGNUM 3		/* Contains address of executing stack */
+				/* frame */
+#define SP_REGNUM 30		/* Contains address of top of stack */
+#define SAR_REGNUM 32		/* Shift Amount Register */
+#define IPSW_REGNUM 41		/* Interrupt Processor Status Word */
+#define PCOQ_HEAD_REGNUM 33	/* instruction offset queue head */
+#define PCSQ_HEAD_REGNUM 34	/* instruction space queue head */
+#define PCOQ_TAIL_REGNUM 35	/* instruction offset queue tail */
+#define PCSQ_TAIL_REGNUM 36	/* instruction space queue tail */
+#define EIEM_REGNUM 37		/* External Interrupt Enable Mask */
+#define IIR_REGNUM 38		/* Interrupt Instruction Register */
+#define IOR_REGNUM 40		/* Interrupt Offset Register */
+#define SR4_REGNUM 43		/* space register 4 */
+#define RCR_REGNUM 51		/* Recover Counter (also known as cr0) */
+#define CCR_REGNUM 54		/* Coprocessor Configuration Register */
+#define TR0_REGNUM 57		/* Temporary Registers (cr24 -> cr31) */
+#define CR27_REGNUM 60          /* Base register for thread-local storage, cr27 */
+#define FP0_REGNUM 64		/* floating point reg. 0 (fspr)*/
+#define FP4_REGNUM 72
+
+#define ARG0_REGNUM 26          /* The first argument of a callee. */
+#define ARG1_REGNUM 25          /* The second argument of a callee. */
+#define ARG2_REGNUM 24          /* The third argument of a callee. */
+#define ARG3_REGNUM 23          /* The fourth argument of a callee. */
+
+/* compatibility with the rest of gdb. */
+#define PC_REGNUM PCOQ_HEAD_REGNUM
+#define NPC_REGNUM PCOQ_TAIL_REGNUM
+
+/*
+ * Processor Status Word Masks
+ */
+
+#define PSW_T   0x01000000      /* Taken Branch Trap Enable */
+#define PSW_H   0x00800000      /* Higher-Privilege Transfer Trap Enable */
+#define PSW_L   0x00400000      /* Lower-Privilege Transfer Trap Enable */
+#define PSW_N   0x00200000      /* PC Queue Front Instruction Nullified */
+#define PSW_X   0x00100000      /* Data Memory Break Disable */
+#define PSW_B   0x00080000      /* Taken Branch in Previous Cycle */
+#define PSW_C   0x00040000      /* Code Address Translation Enable */
+#define PSW_V   0x00020000      /* Divide Step Correction */
+#define PSW_M   0x00010000      /* High-Priority Machine Check Disable */
+#define PSW_CB  0x0000ff00      /* Carry/Borrow Bits */
+#define PSW_R   0x00000010      /* Recovery Counter Enable */
+#define PSW_Q   0x00000008      /* Interruption State Collection Enable */
+#define PSW_P   0x00000004      /* Protection ID Validation Enable */
+#define PSW_D   0x00000002      /* Data Address Translation Enable */
+#define PSW_I   0x00000001      /* External, Power Failure, Low-Priority */
+                                /* Machine Check Interruption Enable */
+
+/* When fetching register values from an inferior or a core file,
+   clean them up using this macro.  BUF is a char pointer to
+   the raw value of the register in the registers[] array.  */
+
+#define	CLEAN_UP_REGISTER_VALUE(regno, buf) \
+  do {	\
+    if ((regno) == PCOQ_HEAD_REGNUM || (regno) == PCOQ_TAIL_REGNUM) \
+      (buf)[3] &= ~0x3;	\
+  } while (0)
+
+/* Define DO_REGISTERS_INFO() to do machine-specific formatting
+   of register dumps. */
+
+#define DO_REGISTERS_INFO(_regnum, fp) pa_do_registers_info (_regnum, fp)
+extern void pa_do_registers_info PARAMS ((int, int));
+
+#if 0
+#define STRCAT_REGISTER(regnum, fpregs, stream, precision) pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
+extern void pa_do_strcat_registers_info PARAMS ((int, int, GDB_FILE *, enum precision_type));
+#endif
+
+/* PA specific macro to see if the current instruction is nullified. */
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED \
+    (((int)read_register (IPSW_REGNUM) & 0x00200000) && \
+     !((int)read_register (FLAGS_REGNUM) & 0x2))
+#endif
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the PA-RISC, all regs are 4 bytes, including
+   the FP registers (they're accessed as two 4 byte halves).  */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) (N) * 4
+
+/* Number of bytes of storage in the program's representation
+   for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ ((N) < FP4_REGNUM ? builtin_type_int : builtin_type_float)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) {write_register (28, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF. 
+
+   elz: changed what to return when length is > 4: the stored result is 
+   in register 28 and in register 29, with the lower order word being in reg 29, 
+   so we must start reading it from somehere in the middle of reg28
+
+   FIXME: Not sure what to do for soft float here.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  { \
+    if (TYPE_CODE (TYPE) == TYPE_CODE_FLT && !SOFT_FLOAT) \
+      memcpy ((VALBUF), \
+	      ((char *)(REGBUF)) + REGISTER_BYTE (FP4_REGNUM), \
+	      TYPE_LENGTH (TYPE)); \
+    else \
+      memcpy ((VALBUF), \
+	      (char *)(REGBUF) + REGISTER_BYTE (28) + \
+	      (TYPE_LENGTH (TYPE) > 4 ? (8 - TYPE_LENGTH (TYPE)) : (4 - TYPE_LENGTH (TYPE))), \
+	      TYPE_LENGTH (TYPE)); \
+  }
+
+
+ /* elz: decide whether the function returning a value of type type
+    will put it on the stack or in the registers.
+    The pa calling convention says that:
+    register 28 (called ret0 by gdb) contains any ASCII char,
+    and any non_floating point value up to 32-bits.
+    reg 28 and 29 contain non-floating point up tp 64 bits and larger
+    than 32 bits. (higer order word in reg 28).
+    fr4: floating point up to 64 bits
+    sr1: space identifier (32-bit)
+    stack: any lager than 64-bit, with the address in r28
+ */
+extern use_struct_convention_fn hppa_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p,type) hppa_use_struct_convention (gcc_p,type)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.
+
+   For software floating point the return value goes into the integer
+   registers.  But we don't have any flag to key this on, so we always
+   store the value into the integer registers, and if it's a float value,
+   then we put it in the float registers too.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE (28),(VALBUF), TYPE_LENGTH (TYPE)) ; \
+  if (!SOFT_FLOAT) \
+    write_register_bytes ((TYPE_CODE(TYPE) == TYPE_CODE_FLT \
+			   ? REGISTER_BYTE (FP4_REGNUM) \
+			   : REGISTER_BYTE (28)),		\
+			  (VALBUF), TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  (*(int *)((REGBUF) + REGISTER_BYTE (28)))
+
+/* elz: Return a large value, which is stored on the stack at addr.
+   This is defined only for the hppa, at this moment. 
+   The above macro EXTRACT_STRUCT_VALUE_ADDRESS is not called anymore,
+   because it assumes that on exit from a called function which returns
+   a large structure on the stack, the address of the ret structure is 
+   still in register 28. Unfortunately this register is usually overwritten
+   by the called function itself, on hppa. This is specified in the calling
+   convention doc. As far as I know, the only way to get the return value
+   is to have the caller tell us where it told the callee to put it, rather
+   than have the callee tell us.
+*/
+#define VALUE_RETURNED_FROM_STACK(valtype,addr) \
+  hppa_value_returned_from_stack (valtype, addr)
+
+/*
+ * This macro defines the register numbers (from REGISTER_NAMES) that
+ * are effectively unavailable to the user through ptrace().  It allows
+ * us to include the whole register set in REGISTER_NAMES (inorder to
+ * better support remote debugging).  If it is used in
+ * fetch/store_inferior_registers() gdb will not complain about I/O errors
+ * on fetching these registers.  If all registers in REGISTER_NAMES
+ * are available, then return false (0).
+ */
+
+#define CANNOT_STORE_REGISTER(regno)            \
+                   ((regno) == 0) ||     \
+                   ((regno) == PCSQ_HEAD_REGNUM) || \
+                   ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) ||  \
+                   ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM)
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, frame) init_extra_frame_info (fromleaf, frame)
+extern void init_extra_frame_info PARAMS ((int, struct frame_info *));
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address
+   and produces the nominal address of the caller frame.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.
+   In that case, FRAME_CHAIN_COMBINE is not used.  */
+
+/* In the case of the PA-RISC, the frame's nominal address
+   is the address of a 4-byte word containing the calling frame's
+   address (previous FP).  */
+
+#define FRAME_CHAIN(thisframe) frame_chain (thisframe)
+extern CORE_ADDR frame_chain PARAMS ((struct frame_info *));
+
+extern int hppa_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define FRAME_CHAIN_VALID(chain, thisframe) hppa_frame_chain_valid (chain, thisframe)
+
+#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_function_invocation(FI)
+extern int frameless_function_invocation PARAMS ((struct frame_info *));
+
+extern CORE_ADDR hppa_frame_saved_pc PARAMS ((struct frame_info *frame));
+#define FRAME_SAVED_PC(FRAME) hppa_frame_saved_pc (FRAME)
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+  hppa_frame_find_saved_regs (frame_info, &frame_saved_regs)
+extern void
+hppa_frame_find_saved_regs PARAMS ((struct frame_info *,
+				    struct frame_saved_regs *));
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc. */
+
+#define PUSH_DUMMY_FRAME push_dummy_frame (&inf_status)
+extern void push_dummy_frame PARAMS ((struct inferior_status *));
+
+/* Discard from the stack the innermost frame, 
+   restoring all saved registers.  */
+#define POP_FRAME  hppa_pop_frame ()
+extern void hppa_pop_frame PARAMS ((void));
+
+#define INSTRUCTION_SIZE 4
+
+#ifndef PA_LEVEL_0
+
+/* Non-level zero PA's have space registers (but they don't always have
+   floating-point, do they????  */
+
+/* This sequence of words is the instructions
+
+; Call stack frame has already been built by gdb. Since we could be calling 
+; a varargs function, and we do not have the benefit of a stub to put things in
+; the right place, we load the first 4 word of arguments into both the general
+; and fp registers.
+call_dummy
+	ldw -36(sp), arg0
+	ldw -40(sp), arg1
+	ldw -44(sp), arg2
+	ldw -48(sp), arg3
+	ldo -36(sp), r1
+	fldws 0(0, r1), fr4
+	fldds -4(0, r1), fr5
+	fldws -8(0, r1), fr6
+	fldds -12(0, r1), fr7
+	ldil 0, r22			; FUNC_LDIL_OFFSET must point here
+	ldo 0(r22), r22			; FUNC_LDO_OFFSET must point here
+	ldsid (0,r22), r4
+	ldil 0, r1			; SR4EXPORT_LDIL_OFFSET must point here
+	ldo 0(r1), r1			; SR4EXPORT_LDO_OFFSET must point here
+	ldsid (0,r1), r20
+	combt,=,n r4, r20, text_space	; If target is in data space, do a
+	ble 0(sr5, r22)			; "normal" procedure call
+	copy r31, r2
+	break 4, 8 
+	mtsp r21, sr0
+	ble,n 0(sr0, r22)
+text_space				; Otherwise, go through _sr4export,
+	ble (sr4, r1)			; which will return back here.
+	stw r31,-24(r30)
+	break 4, 8
+	mtsp r21, sr0
+	ble,n 0(sr0, r22)
+	nop				; To avoid kernel bugs 
+	nop				; and keep the dummy 8 byte aligned
+
+   The dummy decides if the target is in text space or data space. If
+   it's in data space, there's no problem because the target can
+   return back to the dummy. However, if the target is in text space,
+   the dummy calls the secret, undocumented routine _sr4export, which
+   calls a function in text space and can return to any space. Instead
+   of including fake instructions to represent saved registers, we
+   know that the frame is associated with the call dummy and treat it
+   specially.
+
+   The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 
+   kernels.   If the memory at the location pointed to by the PC is
+   0xffffffff then a ptrace step call will fail (even if the instruction
+   is nullified).
+
+   The code to pop a dummy frame single steps three instructions
+   starting with the last mtsp.  This includes the nullified "instruction"
+   following the ble (which is uninitialized junk).  If the 
+   "instruction" following the last BLE is 0xffffffff, then the ptrace
+   will fail and the dummy frame is not correctly popped.
+
+   By placing a NOP in the delay slot of the BLE instruction we can be 
+   sure that we never try to execute a 0xffffffff instruction and
+   avoid the kernel bug.  The second NOP is needed to keep the call
+   dummy 8 byte aligned.  */
+
+/* Define offsets into the call dummy for the target function address */
+#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9)
+#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10)
+
+/* Define offsets into the call dummy for the _sr4export address */
+#define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12)
+#define SR4EXPORT_LDO_OFFSET (INSTRUCTION_SIZE * 13)
+
+#define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\
+                    0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\
+                    0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\
+                    0x20200000, 0x34210000, 0x002010b4, 0x82842022,\
+                    0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\
+                    0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\
+                    0x00151820, 0xe6c00002, 0x08000240, 0x08000240}
+
+#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 28)
+
+#else /* defined PA_LEVEL_0 */
+
+/* This is the call dummy for a level 0 PA.  Level 0's don't have space
+   registers (or floating point??), so we skip all that inter-space call stuff,
+   and avoid touching the fp regs.
+
+call_dummy
+
+	ldw -36(%sp), %arg0
+	ldw -40(%sp), %arg1
+	ldw -44(%sp), %arg2
+	ldw -48(%sp), %arg3
+	ldil 0, %r31			; FUNC_LDIL_OFFSET must point here
+	ldo 0(%r31), %r31		; FUNC_LDO_OFFSET must point here
+	ble 0(%sr0, %r31)
+	copy %r31, %r2
+	break 4, 8 
+	nop				; restore_pc_queue expects these
+	bv,n 0(%r22)			; instructions to be here...
+	nop
+*/
+
+/* Define offsets into the call dummy for the target function address */
+#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 4)
+#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 5)
+
+#define CALL_DUMMY {0x4bda3fb9, 0x4bd93fb1, 0x4bd83fa9, 0x4bd73fa1,\
+		    0x23e00000, 0x37ff0000, 0xe7e00000, 0x081f0242,\
+		    0x00010004, 0x08000240, 0xeac0c002, 0x08000240}
+
+#define CALL_DUMMY_LENGTH (INSTRUCTION_SIZE * 12)
+
+#endif
+
+#define CALL_DUMMY_START_OFFSET 0
+
+/* If we've reached a trap instruction within the call dummy, then
+   we'll consider that to mean that we've reached the call dummy's
+   end after its successful completion. */
+#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
+  (PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \
+   (read_memory_integer((pc), 4) == BREAKPOINT32))
+
+/*
+ * Insert the specified number of args and function address
+ * into a call sequence of the above form stored at DUMMYNAME.
+ *
+ * On the hppa we need to call the stack dummy through $$dyncall.
+ * Therefore our version of FIX_CALL_DUMMY takes an extra argument,
+ * real_pc, which is the location where gdb should start up the
+ * inferior to do the function call.
+ */
+
+#define FIX_CALL_DUMMY hppa_fix_call_dummy
+
+extern CORE_ADDR
+hppa_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR, int,
+			     struct value **, struct type *, int));
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = hppa_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR
+hppa_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int,
+			     CORE_ADDR));
+
+/* The low two bits of the PC on the PA contain the privilege level.  Some
+   genius implementing a (non-GCC) compiler apparently decided this means
+   that "addresses" in a text section therefore include a privilege level,
+   and thus symbol tables should contain these bits.  This seems like a
+   bonehead thing to do--anyway, it seems to work for our purposes to just
+   ignore those bits.  */
+#define SMASH_TEXT_ADDRESS(addr) ((addr) &= ~0x3)
+
+#define	GDB_TARGET_IS_HPPA
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/*
+ * Unwind table and descriptor.
+ */
+
+struct unwind_table_entry {
+  unsigned int region_start;
+  unsigned int region_end;
+
+  unsigned int Cannot_unwind         :  1;                      /* 0 */
+  unsigned int Millicode             :  1;                      /* 1 */
+  unsigned int Millicode_save_sr0    :  1;                      /* 2 */
+  unsigned int Region_description    :  2;                      /* 3..4 */
+  unsigned int reserved1             :  1;                      /* 5 */
+  unsigned int Entry_SR              :  1;                      /* 6 */
+  unsigned int Entry_FR              :  4; /* number saved */   /* 7..10 */
+  unsigned int Entry_GR              :  5; /* number saved */   /* 11..15 */
+  unsigned int Args_stored           :  1;                      /* 16 */
+  unsigned int Variable_Frame	     :  1;                      /* 17 */
+  unsigned int Separate_Package_Body :  1;                      /* 18 */
+  unsigned int Frame_Extension_Millicode:1;                     /* 19 */
+  unsigned int Stack_Overflow_Check  :  1;                      /* 20 */
+  unsigned int Two_Instruction_SP_Increment:1;                  /* 21 */
+  unsigned int Ada_Region	     :  1;                      /* 22 */
+  unsigned int cxx_info              :  1;                      /* 23 */
+  unsigned int cxx_try_catch         :  1;                      /* 24 */
+  unsigned int sched_entry_seq       :  1;                      /* 25 */
+  unsigned int reserved2	     :  1;                      /* 26 */
+  unsigned int Save_SP               :  1;                      /* 27 */
+  unsigned int Save_RP               :  1;                      /* 28 */
+  unsigned int Save_MRP_in_frame     :  1;                      /* 29 */
+  unsigned int extn_ptr_defined      :  1;                      /* 30 */
+  unsigned int Cleanup_defined       :  1;                      /* 31 */
+
+  unsigned int MPE_XL_interrupt_marker: 1;                      /* 0 */
+  unsigned int HP_UX_interrupt_marker:  1;                      /* 1 */
+  unsigned int Large_frame	     :  1;                      /* 2 */
+  unsigned int Pseudo_SP_Set         :  1;                      /* 3 */
+  unsigned int reserved4             :  1;                      /* 4 */
+  unsigned int Total_frame_size      : 27;                      /* 5..31 */
+
+  /* This is *NOT* part of an actual unwind_descriptor in an object
+     file.  It is *ONLY* part of the "internalized" descriptors that
+     we create from those in a file.
+     */
+  struct {
+    unsigned int  stub_type          : 4;                       /* 0..3 */
+    unsigned int  padding            : 28;                      /* 4..31 */
+  } stub_unwind;
+};
+
+/* HP linkers also generate unwinds for various linker-generated stubs.
+   GDB reads in the stubs from the $UNWIND_END$ subspace, then 
+   "converts" them into normal unwind entries using some of the reserved
+   fields to store the stub type.  */
+
+struct stub_unwind_entry
+{
+  /* The offset within the executable for the associated stub.  */
+  unsigned stub_offset;
+
+  /* The type of stub this unwind entry describes.  */
+  char type;
+
+  /* Unknown.  Not needed by GDB at this time.  */
+  char prs_info;
+
+  /* Length (in instructions) of the associated stub.  */
+  short stub_length;
+};
+
+/* Sizes (in bytes) of the native unwind entries.  */
+#define UNWIND_ENTRY_SIZE 16
+#define STUB_UNWIND_ENTRY_SIZE 8
+
+/* The gaps represent linker stubs used in MPE and space for future
+   expansion.  */
+enum unwind_stub_types
+{
+  LONG_BRANCH = 1,
+  PARAMETER_RELOCATION = 2,
+  EXPORT = 10,
+  IMPORT = 11,
+};
+
+/* We use the objfile->obj_private pointer for two things:
+ *
+ * 1.  An unwind table;
+ *
+ * 2.  A pointer to any associated shared library object.
+ *
+ * #defines are used to help refer to these objects.
+ */
+ 
+/* Info about the unwind table associated with an object file.
+ *
+ * This is hung off of the "objfile->obj_private" pointer, and
+ * is allocated in the objfile's psymbol obstack.  This allows
+ * us to have unique unwind info for each executable and shared
+ * library that we are debugging.
+ */
+struct obj_unwind_info {
+  struct unwind_table_entry *table; /* Pointer to unwind info */
+  struct unwind_table_entry *cache; /* Pointer to last entry we found */
+  int last;		   	    /* Index of last entry */
+};
+
+typedef struct obj_private_struct {
+   struct obj_unwind_info *unwind_info; /* a pointer */
+   struct so_list         *so_info;     /* a pointer  */
+} obj_private_data_t;
+
+#if 0
+extern void target_write_pc PARAMS ((CORE_ADDR, int))
+extern CORE_ADDR target_read_pc PARAMS ((int));
+extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *));
+#endif
+
+#define TARGET_READ_PC(pid) target_read_pc (pid)
+extern CORE_ADDR target_read_pc PARAMS ((int));
+
+#define TARGET_WRITE_PC(v,pid) target_write_pc (v,pid)
+extern void target_write_pc PARAMS ((CORE_ADDR, int));
+
+#define TARGET_READ_FP() target_read_fp (inferior_pid)
+extern CORE_ADDR  target_read_fp PARAMS ((int));
+
+/* For a number of horrible reasons we may have to adjust the location
+   of variables on the stack.  Ugh.  */
+#define HPREAD_ADJUST_STACK_ADDRESS(ADDR) hpread_adjust_stack_address(ADDR)
+
+extern int hpread_adjust_stack_address PARAMS ((CORE_ADDR));
+
+/* If the current gcc for for this target does not produce correct debugging
+   information for float parameters, both prototyped and unprototyped, then
+   define this macro.  This forces gdb to  always assume that floats are
+   passed as doubles and then converted in the callee.
+
+   For the pa, it appears that the debug info marks the parameters as
+   floats regardless of whether the function is prototyped, but the actual
+   values are passed as doubles for the non-prototyped case and floats for
+   the prototyped case.  Thus we choose to make the non-prototyped case work
+   for C and break the prototyped case, since the non-prototyped case is
+   probably much more common.  (FIXME). */
+
+#define COERCE_FLOAT_TO_DOUBLE (current_language -> la_language == language_c)
diff --git a/gdb/config/pa/tm-hppab.h b/gdb/config/pa/tm-hppab.h
new file mode 100644
index 0000000..1cd438d
--- /dev/null
+++ b/gdb/config/pa/tm-hppab.h
@@ -0,0 +1,47 @@
+/* Parameters for execution on an HP PA-RISC machine running BSD, for GDB.
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).  */
+
+/* For BSD:
+
+   The signal context structure pointer is always saved at the base
+   of the frame + 0x4.
+
+   We get the PC & SP directly from the sigcontext structure itself.
+   For other registers we have to dive in a little deeper: 
+
+   The hardware save state pointer is at offset 0x10 within the 
+   signal context structure.
+
+   Within the hardware save state, registers are found in the same order
+   as the register numbers in GDB. */
+
+#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \
+}
+
+#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \
+}
+
+#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \
+{ \
+  int i; \
+  CORE_ADDR TMP; \
+  TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  TMP = read_memory_integer (TMP + 0x10, 4); \
+  for (i = 0; i < NUM_REGS; i++) \
+    { \
+      if (i == SP_REGNUM) \
+	(FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \
+      else \
+	(FSR)->regs[i] = TMP + i * 4; \
+    } \
+}
+
+/* It's mostly just the common stuff.  */
+#include "pa/tm-hppa.h"
diff --git a/gdb/config/pa/tm-hppah.h b/gdb/config/pa/tm-hppah.h
new file mode 100644
index 0000000..a8f1166
--- /dev/null
+++ b/gdb/config/pa/tm-hppah.h
@@ -0,0 +1,79 @@
+/* Parameters for execution on an HP PA-RISC machine, running HPUX, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc. 
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HPUX_SNAP1
+#define HPUX_SNAP2
+
+#include "somsolib.h"
+
+/* Actually, for a PA running HPUX the kernel calls the signal handler
+   without an intermediate trampoline.  Luckily the kernel always sets
+   the return pointer for the signal handler to point to _sigreturn.  */
+#define IN_SIGTRAMP(pc, name) (name && STREQ ("_sigreturn", name))
+
+/* For HPUX:
+
+   The signal context structure pointer is always saved at the base
+   of the frame which "calls" the signal handler.  We only want to find
+   the hardware save state structure, which lives 10 32bit words into
+   sigcontext structure.
+
+   Within the hardware save state structure, registers are found in the
+   same order as the register numbers in GDB.
+
+   At one time we peeked at %r31 rather than the PC queues to determine
+   what instruction took the fault.  This was done on purpose, but I don't
+   remember why.  Looking at the PC queues is really the right way, and
+   I don't remember why that didn't work when this code was originally
+   written.  */
+
+#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + (43 * 4) , 4); \
+}
+
+#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + (40 * 4), 4); \
+}
+
+#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \
+{ \
+  int i; \
+  CORE_ADDR TMP; \
+  TMP = (FRAME)->frame + (10 * 4); \
+  for (i = 0; i < NUM_REGS; i++) \
+    { \
+      if (i == SP_REGNUM) \
+	(FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \
+      else \
+	(FSR)->regs[i] = TMP + i * 4; \
+    } \
+}
+
+/* For HP-UX on PA-RISC we have an implementation
+   for the exception handling target op (in hppa-tdep.c) */
+#define CHILD_ENABLE_EXCEPTION_CALLBACK
+#define CHILD_GET_CURRENT_EXCEPTION_EVENT
+
+/* Mostly it's common to all HPPA's.  */
+#include "pa/tm-hppa.h"
diff --git a/gdb/config/pa/tm-hppao.h b/gdb/config/pa/tm-hppao.h
new file mode 100644
index 0000000..7df4247
--- /dev/null
+++ b/gdb/config/pa/tm-hppao.h
@@ -0,0 +1,96 @@
+/* Parameters for execution on an HP PA-RISC machine running OSF1, for GDB.
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).  */
+
+/* Define offsets to access CPROC stack when it does not have
+ * a kernel thread.
+ */
+#define MACHINE_CPROC_SP_OFFSET 20
+#define MACHINE_CPROC_PC_OFFSET 16
+#define MACHINE_CPROC_FP_OFFSET 12
+
+/*
+ * Software defined PSW masks.
+ */
+#define PSW_SS  0x10000000      /* Kernel managed single step */
+
+/* Thread flavors used in re-setting the T bit.
+ * @@ this is also bad for cross debugging.
+ */
+#define TRACE_FLAVOR		HP800_THREAD_STATE
+#define TRACE_FLAVOR_SIZE	HP800_THREAD_STATE_COUNT
+#define TRACE_SET(x,state) \
+	((struct hp800_thread_state *)state)->cr22 |= PSW_SS
+#define TRACE_CLEAR(x,state) \
+  	((((struct hp800_thread_state *)state)->cr22 &= ~PSW_SS), 1)
+
+/* For OSF1 (Should be close if not identical to BSD, but I haven't
+   tested it yet):
+
+   The signal context structure pointer is always saved at the base
+   of the frame + 0x4.
+
+   We get the PC & SP directly from the sigcontext structure itself.
+   For other registers we have to dive in a little deeper: 
+
+   The hardware save state pointer is at offset 0x10 within the 
+   signal context structure.
+
+   Within the hardware save state, registers are found in the same order
+   as the register numbers in GDB. */
+
+#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \
+}
+
+#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \
+{ \
+  *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \
+}
+
+#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \
+{ \
+  int i; \
+  CORE_ADDR TMP; \
+  TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \
+  TMP = read_memory_integer (TMP + 0x10, 4); \
+  for (i = 0; i < NUM_REGS; i++) \
+    { \
+      if (i == SP_REGNUM) \
+	(FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \
+      else \
+	(FSR)->regs[i] = TMP + i * 4; \
+    } \
+}
+
+/* OSF1 does not need the pc space queue restored.  */
+#define NO_PC_SPACE_QUEUE_RESTORE
+
+/* The mach kernel uses the recovery counter to implement single
+   stepping.  While this greatly simplifies the kernel support
+   necessary for single stepping, it unfortunately does the wrong
+   thing in the presense of a nullified instruction (gives control
+   back two insns after the nullifed insn).  This is an artifact
+   of the HP architecture (recovery counter doesn't tick for
+   nullified insns).
+
+   Do our best to avoid losing in such situations.  */
+#define INSTRUCTION_NULLIFIED \
+(({ \
+    int ipsw = (int)read_register(IPSW_REGNUM); \
+    if (ipsw & PSW_N)  \
+      { \
+        int pcoqt = (int)read_register(PCOQ_TAIL_REGNUM); \
+        write_register(PCOQ_HEAD_REGNUM, pcoqt); \
+        write_register(PCOQ_TAIL_REGNUM, pcoqt + 0x4); \
+        write_register(IPSW_REGNUM, ipsw & ~(PSW_N | PSW_B | PSW_X)); \
+        stop_pc = pcoqt; \
+      } \
+   }), 0) 
+
+/* It's mostly just the common stuff.  */
+
+#include "pa/tm-hppa.h"
diff --git a/gdb/config/pa/tm-pro.h b/gdb/config/pa/tm-pro.h
new file mode 100644
index 0000000..05ecb62
--- /dev/null
+++ b/gdb/config/pa/tm-pro.h
@@ -0,0 +1,14 @@
+/* Parameters for execution on an HP PA-RISC level 0 embedded system.
+   This is based on tm-hppab.h.
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).  */
+
+#define PA_LEVEL_0		/* Disables touching space regs and fp */
+
+/* All the PRO targets use software floating point at the moment.  */
+#define SOFT_FLOAT 1
+
+/* It's mostly just the common stuff.  */
+#include "pa/tm-hppa.h"
+
+#define GDB_TARGET_IS_PA_ELF
diff --git a/gdb/config/pa/xm-hppab.h b/gdb/config/pa/xm-hppab.h
new file mode 100644
index 0000000..9f6467f
--- /dev/null
+++ b/gdb/config/pa/xm-hppab.h
@@ -0,0 +1,27 @@
+/* Parameters for hosting on an HPPA PA-RISC machine, running BSD, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc. 
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is a big-endian host.  */
+
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+#include "pa/xm-pa.h"
diff --git a/gdb/config/pa/xm-hppah.h b/gdb/config/pa/xm-hppah.h
new file mode 100644
index 0000000..2cd47dd
--- /dev/null
+++ b/gdb/config/pa/xm-hppah.h
@@ -0,0 +1,49 @@
+/* Parameters for hosting on an HPPA-RISC machine running HPUX, for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc. 
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Host is big-endian. */
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+#include "pa/xm-pa.h"
+
+#define USG
+
+#ifndef __STDC__
+/* This define is discussed in decode_line_1 in symtab.c  */
+#define HPPA_COMPILER_BUG
+#endif
+
+#define HAVE_TERMIOS
+
+/* HP defines malloc and realloc as returning void *, even for non-ANSI
+   compilations (such as with the native compiler). */
+
+#define MALLOC_INCOMPATIBLE
+
+extern void *
+malloc PARAMS ((size_t));
+
+extern void *
+realloc PARAMS ((void *, size_t));
+
+extern void
+free PARAMS ((void *));
diff --git a/gdb/config/pa/xm-pa.h b/gdb/config/pa/xm-pa.h
new file mode 100644
index 0000000..979609d
--- /dev/null
+++ b/gdb/config/pa/xm-pa.h
@@ -0,0 +1,5 @@
+/* Definitions for all PA machines.  */
+
+/* This was created for "makeva", which is obsolete.  This file can
+   probably go away (unless someone can think of some other host thing
+   which is common to various pa machines).  */
diff --git a/gdb/config/powerpc/aix.mh b/gdb/config/powerpc/aix.mh
new file mode 100644
index 0000000..bac3e30
--- /dev/null
+++ b/gdb/config/powerpc/aix.mh
@@ -0,0 +1,11 @@
+# Host: IBM PowerPC running AIX
+
+XM_FILE= xm-aix.h
+XDEPFILES= 
+
+NAT_FILE= nm-aix.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o xcoffread.o
+
+# When compiled with cc, for debugging, this argument should be passed.
+# We have no idea who our current compiler is though, so we skip it.
+# MH_CFLAGS = -bnodelcsect
diff --git a/gdb/config/powerpc/aix.mt b/gdb/config/powerpc/aix.mt
new file mode 100644
index 0000000..6d03b7d
--- /dev/null
+++ b/gdb/config/powerpc/aix.mt
@@ -0,0 +1,3 @@
+# Target: PowerPC running AIX
+TDEPFILES= rs6000-tdep.o xcoffsolib.o
+TM_FILE= tm-ppc-aix.h
diff --git a/gdb/config/powerpc/cygwin.mh b/gdb/config/powerpc/cygwin.mh
new file mode 100644
index 0000000..0c25709
--- /dev/null
+++ b/gdb/config/powerpc/cygwin.mh
@@ -0,0 +1,5 @@
+MH_CFLAGS=
+XM_FILE=xm-cygwin.h
+XDEP_FILES=ser-tcp.o
+NATDEPFILES=win32-nat.o
+XM_CLIBS=-lkernel32
diff --git a/gdb/config/powerpc/cygwin.mt b/gdb/config/powerpc/cygwin.mt
new file mode 100644
index 0000000..b86b2af
--- /dev/null
+++ b/gdb/config/powerpc/cygwin.mt
@@ -0,0 +1,6 @@
+# Target: Powerpc running cygnus's unix api over win32
+TDEPFILES= rs6000-tdep.o
+TM_FILE= tm-cygwin.h
+
+
+
diff --git a/gdb/config/powerpc/gdbserve.mt b/gdb/config/powerpc/gdbserve.mt
new file mode 100644
index 0000000..7728407
--- /dev/null
+++ b/gdb/config/powerpc/gdbserve.mt
@@ -0,0 +1,3 @@
+# Target: GDBSERVE.NLM running on a Power-PC
+TDEPFILES= ppc.o 
+CPU_FILE= ppc
diff --git a/gdb/config/powerpc/linux.mh b/gdb/config/powerpc/linux.mh
new file mode 100644
index 0000000..0de0e20
--- /dev/null
+++ b/gdb/config/powerpc/linux.mh
@@ -0,0 +1,10 @@
+# Host: PowerPC, running Linux
+
+XM_FILE= xm-linux.h
+XDEPFILES= ser-tcp.o
+XM_CLIBS=
+
+NAT_FILE= ../nm-sysv4.h
+NATDEPFILES= solib.o corelow.o # infptrace.o inftarg.o fork-child.o core-aout.o core-regset.o
+
+GDBSERVER_DEPFILES= low-linux.o
diff --git a/gdb/config/powerpc/macos.mh b/gdb/config/powerpc/macos.mh
new file mode 100644
index 0000000..63b0648
--- /dev/null
+++ b/gdb/config/powerpc/macos.mh
@@ -0,0 +1,4 @@
+# Host: PowerMac (PowerPC running MacOS)
+
+NATDEPFILES= mac-nat.o
+NAT_FILE= nm-macos.h
diff --git a/gdb/config/powerpc/macos.mt b/gdb/config/powerpc/macos.mt
new file mode 100644
index 0000000..07ad0d2
--- /dev/null
+++ b/gdb/config/powerpc/macos.mt
@@ -0,0 +1,3 @@
+# Target: PowerMac (PowerPC running MacOS)
+TDEPFILES= rs6000-tdep.o xcoffread.o
+TM_FILE= tm-macos.h
diff --git a/gdb/config/powerpc/nm-aix.h b/gdb/config/powerpc/nm-aix.h
new file mode 100644
index 0000000..9661d50
--- /dev/null
+++ b/gdb/config/powerpc/nm-aix.h
@@ -0,0 +1,22 @@
+/* IBM PowerPC native-dependent macros for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "rs6000/nm-rs6000.h"
+
+#define PTRACE_ARG3_TYPE int*
diff --git a/gdb/config/powerpc/nm-macos.h b/gdb/config/powerpc/nm-macos.h
new file mode 100644
index 0000000..a1a3d9e
--- /dev/null
+++ b/gdb/config/powerpc/nm-macos.h
@@ -0,0 +1,20 @@
+/* PowerMac native-dependent macros for GDB, the GNU debugger.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Nothing needed, at least so far.  */
diff --git a/gdb/config/powerpc/nm-solaris.h b/gdb/config/powerpc/nm-solaris.h
new file mode 100644
index 0000000..b276a71
--- /dev/null
+++ b/gdb/config/powerpc/nm-solaris.h
@@ -0,0 +1,30 @@
+/* Native-dependent definitions for PowerPC running Solaris.
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include the generic SVR4 definitions.  */
+
+#include <nm-sysv4.h>
+
+/* Before storing, we need to read all the registers.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Solaris PSRVADDR support does not seem to include a place for nPC.  */
+
+#define PRSVADDR_BROKEN
diff --git a/gdb/config/powerpc/ppc-eabi.mt b/gdb/config/powerpc/ppc-eabi.mt
new file mode 100644
index 0000000..c4e21c8
--- /dev/null
+++ b/gdb/config/powerpc/ppc-eabi.mt
@@ -0,0 +1,3 @@
+# Target: PowerPC running eabi
+TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-bdm.o ocd.o remote-sds.o
+TM_FILE= tm-ppc-eabi.h
diff --git a/gdb/config/powerpc/ppc-nw.mt b/gdb/config/powerpc/ppc-nw.mt
new file mode 100644
index 0000000..0eaa23d
--- /dev/null
+++ b/gdb/config/powerpc/ppc-nw.mt
@@ -0,0 +1,3 @@
+# Target: PowerPC running Netware
+TDEPFILES= rs6000-tdep.o
+TM_FILE= tm-ppc-nw.h
diff --git a/gdb/config/powerpc/ppc-sim.mt b/gdb/config/powerpc/ppc-sim.mt
new file mode 100644
index 0000000..c73fef2
--- /dev/null
+++ b/gdb/config/powerpc/ppc-sim.mt
@@ -0,0 +1,6 @@
+# Target: PowerPC running eabi and including the simulator
+TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o dink32-rom.o ppc-bdm.o ocd.o remote-sds.o
+TM_FILE= tm-ppc-eabi.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/ppc/libsim.a
diff --git a/gdb/config/powerpc/ppcle-eabi.mt b/gdb/config/powerpc/ppcle-eabi.mt
new file mode 100644
index 0000000..b336a11
--- /dev/null
+++ b/gdb/config/powerpc/ppcle-eabi.mt
@@ -0,0 +1,3 @@
+# Target: PowerPC running eabi in little endian mode
+TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o ocd.o
+TM_FILE= tm-ppcle-eabi.h
diff --git a/gdb/config/powerpc/ppcle-sim.mt b/gdb/config/powerpc/ppcle-sim.mt
new file mode 100644
index 0000000..f08dafe
--- /dev/null
+++ b/gdb/config/powerpc/ppcle-sim.mt
@@ -0,0 +1,6 @@
+# Target: PowerPC running eabi in little endian mode under the simulator
+TDEPFILES= ser-ocd.o rs6000-tdep.o monitor.o dsrec.o ppcbug-rom.o ppc-bdm.o ocd.o
+TM_FILE= tm-ppcle-eabi.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/ppc/libsim.a
diff --git a/gdb/config/powerpc/solaris.mh b/gdb/config/powerpc/solaris.mh
new file mode 100644
index 0000000..7d3444e
--- /dev/null
+++ b/gdb/config/powerpc/solaris.mh
@@ -0,0 +1,18 @@
+# Host: PowerPC, running Solaris 2
+
+XM_FILE= xm-solaris.h
+XDEPFILES= ser-tcp.o
+XM_CLIBS= -lsocket -lnsl
+
+NAT_FILE= nm-solaris.h
+NATDEPFILES= corelow.o core-sol2.o solib.o procfs.o fork-child.o
+
+# If you are compiling with Sun's compiler, add the -xs option to CC
+# (e.g. `make CC="cc -xs"').
+# Sun's compilers require the -xs option to produce debug information
+# in the final linked executable.  Otherwise they leave it in the .o
+# files only, with undocumented pointers to it in the linked executable.
+# This is commented out because we don't assume that the Sun compiler
+# is in use.
+#MH_CFLAGS=-xs
+HOST_IPC=-DBSD_IPC
diff --git a/gdb/config/powerpc/solaris.mt b/gdb/config/powerpc/solaris.mt
new file mode 100644
index 0000000..a6e421e
--- /dev/null
+++ b/gdb/config/powerpc/solaris.mt
@@ -0,0 +1,3 @@
+# Target: PowerPC, running Solaris 2
+TDEPFILES= rs6000-tdep.o
+TM_FILE= tm-solaris.h
diff --git a/gdb/config/powerpc/tm-cygwin.h b/gdb/config/powerpc/tm-cygwin.h
new file mode 100644
index 0000000..27ae24a
--- /dev/null
+++ b/gdb/config/powerpc/tm-cygwin.h
@@ -0,0 +1,21 @@
+/* Macro definitions PowerPC running under the Cygwin API.
+   Copyright 1996 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "powerpc/tm-ppcle-eabi.h"
+
diff --git a/gdb/config/powerpc/tm-macos.h b/gdb/config/powerpc/tm-macos.h
new file mode 100644
index 0000000..b29d285
--- /dev/null
+++ b/gdb/config/powerpc/tm-macos.h
@@ -0,0 +1,26 @@
+/* Macro definitions for Power PC running MacOS.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+
+#define GDB_TARGET_POWERPC
+
+/* This is no use to us.  */
+#undef PC_LOAD_SEGMENT
diff --git a/gdb/config/powerpc/tm-ppc-aix.h b/gdb/config/powerpc/tm-ppc-aix.h
new file mode 100644
index 0000000..5dfb3c4
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppc-aix.h
@@ -0,0 +1,28 @@
+/* Macro definitions for Power PC running AIX.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#ifndef TM_PPC_AIX_H
+#define TM_PPC_AIX_H
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+
+#define GDB_TARGET_POWERPC
+
+#endif /* TM_PPC_AIX_H */
diff --git a/gdb/config/powerpc/tm-ppc-eabi.h b/gdb/config/powerpc/tm-ppc-eabi.h
new file mode 100644
index 0000000..c2828b2
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppc-eabi.h
@@ -0,0 +1,84 @@
+/* Macro definitions for Power PC running embedded ABI.
+   Copyright 1995, 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PPC_EABI_H
+#define TM_PPC_EABI_H
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+/* except we want to allow single stepping */
+#undef SOFTWARE_SINGLE_STEP_P
+#define SOFTWARE_SINGLE_STEP_P 0
+
+#undef	DEFAULT_LR_SAVE
+#define	DEFAULT_LR_SAVE 4	/* eabi saves LR at 4 off of SP */
+
+#define GDB_TARGET_POWERPC
+
+#undef PC_LOAD_SEGMENT
+#undef PROCESS_LINENUMBER_HOOK
+
+#undef TEXT_SEGMENT_BASE
+#define TEXT_SEGMENT_BASE 1
+
+/* Say that we're using ELF, not XCOFF.  */
+#define ELF_OBJECT_FORMAT 1
+
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+
+/* return true if a given `pc' value is in `call dummy' function. */
+/* FIXME: This just checks for the end of the stack, which is broken
+   for things like stepping through gcc nested function stubs.  */
+#undef PC_IN_CALL_DUMMY
+#define	PC_IN_CALL_DUMMY(STOP_PC, STOP_SP, STOP_FRAME_ADDR)	\
+	(STOP_SP < STOP_PC)
+
+/* generic dummy frame stuff */
+
+
+
+/* target-specific dummy_frame stuff */
+
+extern struct frame_info *rs6000_pop_frame PARAMS ((struct frame_info *frame));
+
+extern CORE_ADDR ppc_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+extern CORE_ADDR rs6000_push_arguments PARAMS ((int nargs, 
+					      struct value **args, 
+					      CORE_ADDR sp,
+					      unsigned char struct_return,
+					      CORE_ADDR struct_addr));
+
+#undef PUSH_DUMMY_FRAME
+#define PUSH_DUMMY_FRAME             generic_push_dummy_frame ()
+
+#define PUSH_RETURN_ADDRESS(PC, SP)      ppc_push_return_address (PC, SP)
+
+/* override the standard get_saved_register function with 
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+#undef CALL_DUMMY_START_OFFSET
+#define CALL_DUMMY_START_OFFSET      0
+
+
+#endif /* TM_PPC_EABI_H */
diff --git a/gdb/config/powerpc/tm-ppc-nw.h b/gdb/config/powerpc/tm-ppc-nw.h
new file mode 100644
index 0000000..38f7211
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppc-nw.h
@@ -0,0 +1,31 @@
+/* Macro definitions for Power PC running Netware.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PPC_NW_H
+#define TM_PPC_NW_H
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+
+#define GDB_TARGET_POWERPC
+
+#undef PC_LOAD_SEGMENT
+#undef PROCESS_LINENUMBER_HOOK
+
+#endif /* TM_PPC_NW_H */
diff --git a/gdb/config/powerpc/tm-ppc-sim.h b/gdb/config/powerpc/tm-ppc-sim.h
new file mode 100644
index 0000000..e4116bc
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppc-sim.h
@@ -0,0 +1,26 @@
+/* Macro definitions for Power PC running embedded ABI under the simulator.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PPC_SIM_H
+#define TM_PPC_SIM_H
+
+#include "powerpc/tm-ppc-eabi.h"
+
+#endif /* TM_PPC_SIM_H */
+
diff --git a/gdb/config/powerpc/tm-ppcle-eabi.h b/gdb/config/powerpc/tm-ppcle-eabi.h
new file mode 100644
index 0000000..355195d
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppcle-eabi.h
@@ -0,0 +1,30 @@
+/* Macro definitions for Power PC running embedded ABI
+   in little endian mode.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PPCLE_EABI_H
+#define TM_PPCLE_EABI_H
+
+/* Use normal ppc-eabi definitions */
+#include "powerpc/tm-ppc-eabi.h"
+
+#undef  TARGET_BYTE_ORDER_DEFAULT
+#define TARGET_BYTE_ORDER_DEFAULT	LITTLE_ENDIAN
+
+#endif /* TM_PPCLE_EABI_H */
diff --git a/gdb/config/powerpc/tm-ppcle-sim.h b/gdb/config/powerpc/tm-ppcle-sim.h
new file mode 100644
index 0000000..76564f2
--- /dev/null
+++ b/gdb/config/powerpc/tm-ppcle-sim.h
@@ -0,0 +1,26 @@
+/* Macro definitions for Power PC running embedded ABI under the simulator.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_PPCLE_SIM_H
+#define TM_PPCLE_SIM_H
+
+#include "powerpc/tm-ppcle-eabi.h"
+
+#endif /* TM_PPCLE_SIM_H */
+
diff --git a/gdb/config/powerpc/tm-solaris.h b/gdb/config/powerpc/tm-solaris.h
new file mode 100644
index 0000000..bd9373f
--- /dev/null
+++ b/gdb/config/powerpc/tm-solaris.h
@@ -0,0 +1,74 @@
+/* Macro definitions for GDB for a PowerPC running Solaris 2
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "powerpc/tm-ppc-eabi.h"
+ 
+/* There are two different signal handler trampolines in Solaris2.  */
+#define IN_SIGTRAMP(pc, name) \
+  ((name) \
+   && (STREQ ("sigacthandler", name) || STREQ ("ucbsigvechandler", name)))
+ 
+/* The signal handler gets a pointer to an ucontext as third argument
+   if it is called from sigacthandler.  This is the offset to the saved
+   PC within it.  sparc_frame_saved_pc knows how to deal with
+   ucbsigvechandler.  */  
+#define SIGCONTEXT_PC_OFFSET 44
+
+#if 0	/* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+#endif  /* 0 */
+
+/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols,
+   and for SunPRO 3.0, N_FUN symbols too.  */
+#define SOFUN_ADDRESS_MAYBE_MISSING
+
+#if 0
+extern char *sunpro_static_transform_name PARAMS ((char *));
+#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x)
+#endif
+
+#define FAULTED_USE_SIGINFO
+
+/* Enable handling of shared libraries for a.out executables.  */
+#define HANDLE_SVR4_EXEC_EMULATORS
diff --git a/gdb/config/powerpc/xm-aix.h b/gdb/config/powerpc/xm-aix.h
new file mode 100644
index 0000000..efd0e74
--- /dev/null
+++ b/gdb/config/powerpc/xm-aix.h
@@ -0,0 +1,30 @@
+/* Parameters for hosting on an PowerPC, for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "xm-aix4.h"
+
+/* This doesn't seem to be declared in any header file I can find.  */
+char *termdef PARAMS ((int, int));
+
+/* UINT_MAX is defined in <sys/limits.h> as a decimal constant (4294967295)
+   which is too large to fit in a signed int when it is parsed by the
+   compiler, so it issues a diagnostic.  Just undef it here so that we
+   use gdb's version in defs.h */
+#undef UINT_MAX
diff --git a/gdb/config/powerpc/xm-cygwin.h b/gdb/config/powerpc/xm-cygwin.h
new file mode 100644
index 0000000..82aa0fb
--- /dev/null
+++ b/gdb/config/powerpc/xm-cygwin.h
@@ -0,0 +1,32 @@
+/* Definitions for hosting on WIN32, for GDB.
+   Copyright 1995, 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+#include "fopen-bin.h"
+
+#define GDBINIT_FILENAME "gdb.ini"
+
+#define SLASH_P(X) ((X)=='\\' || (X) == '/')
+#define ROOTED_P(X) ((SLASH_P((X)[0]))|| ((X)[1] ==':'))
+#define SLASH_CHAR '/'
+#define SLASH_STRING "/"
+
+/* Define this lseek(n) != nth byte of file */
+#define LSEEK_NOT_LINEAR
diff --git a/gdb/config/powerpc/xm-linux.h b/gdb/config/powerpc/xm-linux.h
new file mode 100644
index 0000000..41c8ba7
--- /dev/null
+++ b/gdb/config/powerpc/xm-linux.h
@@ -0,0 +1,21 @@
+/* Host definitions for a Sun 4, for GDB, the GNU debugger.
+   Copyright 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
diff --git a/gdb/config/powerpc/xm-mpw.h b/gdb/config/powerpc/xm-mpw.h
new file mode 100644
index 0000000..6b33ca2
--- /dev/null
+++ b/gdb/config/powerpc/xm-mpw.h
@@ -0,0 +1,22 @@
+/* Macro definitions for running GDB on Apple Power Macintoshes.
+   Copyright (C) 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+#include <xm-mpw.h>
diff --git a/gdb/config/powerpc/xm-solaris.h b/gdb/config/powerpc/xm-solaris.h
new file mode 100644
index 0000000..9ead87a
--- /dev/null
+++ b/gdb/config/powerpc/xm-solaris.h
@@ -0,0 +1,21 @@
+/* Host definitions for a Sun 4, for GDB, the GNU debugger.
+   Copyright 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
diff --git a/gdb/config/pyr/pyramid.mh b/gdb/config/pyr/pyramid.mh
new file mode 100644
index 0000000..cd25e57
--- /dev/null
+++ b/gdb/config/pyr/pyramid.mh
@@ -0,0 +1,8 @@
+# Host: Pyramid under OSx 4.0 (4.2bsd).
+
+#msg If you don't compile GDB with GCC, you'll need to add
+#msg ALLOCA=alloca.o and ALLOCA1=alloca.o to the Makefile.
+#msg 
+
+XDEPFILES= pyr-xdep.o infptrace.o inftarg.o fork-child.o
+XM_FILE= xm-pyr.h
diff --git a/gdb/config/pyr/pyramid.mt b/gdb/config/pyr/pyramid.mt
new file mode 100644
index 0000000..48f9557
--- /dev/null
+++ b/gdb/config/pyr/pyramid.mt
@@ -0,0 +1,3 @@
+# Target: Pyramid under OSx 4.0 (4.2bsd).
+TDEPFILES= pyr-tdep.o
+TM_FILE= tm-pyr.h
diff --git a/gdb/config/pyr/tm-pyr.h b/gdb/config/pyr/tm-pyr.h
new file mode 100644
index 0000000..b97ebe7
--- /dev/null
+++ b/gdb/config/pyr/tm-pyr.h
@@ -0,0 +1,483 @@
+/* Definitions to make GDB run on a Pyramid under OSx 4.0 (4.2bsd).
+   Copyright 1988, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Traditional Unix virtual address spaces have thre regions: text,
+   data and stack.  The text, initialised data, and uninitialised data
+   are represented in separate segments of the a.out file.
+   When a process dumps core, the data and stack regions are written
+   to a core file.  This gives a debugger enough information to
+   reconstruct (and debug) the virtual address space at the time of
+   the coredump.
+   Pyramids have an distinct fourth region of the virtual address
+   space, in which the contents of the windowed registers are stacked
+   in fixed-size frames.  Pyramid refer to this region as the control
+   stack.  Each call (or trap) automatically allocates a new register
+   frame; each return deallocates the current frame and restores the
+   windowed registers to their values before the call.
+
+   When dumping core, the control stack is written to a core files as
+   a third segment. The core-handling functions need to know to deal
+   with it. */ 
+
+/* Tell corefile.c there is an extra segment.  */
+#define REG_STACK_SEGMENT
+
+/* Floating point is IEEE compatible on most Pyramid hardware
+   (Older processors do not have IEEE NaNs).  */
+#define IEEE_FLOAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+/* FIXME -- do we want to skip insns to allocate the local frame?
+   If so, what do they look like?
+   This is becoming harder, since tege@sics.SE wants to change
+   gcc to not output a prologue when no frame is needed.   */
+#define SKIP_PROLOGUE(pc)  do {} while (0)
+
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame)
+
+/* Address of end of stack space.  */
+/* This seems to be right for the 90x comp.vuw.ac.nz.
+   The correct value at any site may be a function of the configured
+   maximum control stack depth.  If so, I don't know where the
+   control-stack depth is configured, so I can't #include it here. */ 
+#define STACK_END_ADDR (0xc00cc000)
+
+/* Register window stack (Control stack) stack definitions
+    - Address of beginning of control stack.
+    - size of control stack frame
+   (Note that since crts0 is usually the first function called,
+    main()'s control stack is one frame (0x80 bytes) beyond this value.  */
+
+#define CONTROL_STACK_ADDR (0xc00cd000)
+
+/* Bytes in a register window -- 16 parameter regs, 16 local regs
+   for each call, is 32 regs * 4 bytes */
+
+#define CONTROL_STACK_FRAME_SIZE (32*4)
+
+/* FIXME.  On a pyr, Data Stack grows downward; control stack goes upwards. 
+   Which direction should we use for INNER_THAN, PC_INNER_THAN ?? */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Stack must be aligned on 32-bit boundaries when synthesizing
+   function calls. */
+
+#define STACK_ALIGN(ADDR) (((ADDR) + 3) & -4)
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xf0, 00, 00, 00}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+/* pyramids have 64, plus one for the PSW; plus perhaps one more for the
+   kernel stack pointer (ksp) and control-stack pointer (CSP) */
+
+#define NUM_REGS 67
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES \
+{"gr0", "gr1", "gr2", "gr3", "gr4", "gr5", "gr6", "gr7", \
+ "gr8", "gr9", "gr10", "gr11", "logpsw", "cfp", "sp", "pc", \
+ "pr0", "pr1", "pr2", "pr3", "pr4", "pr5", "pr6", "pr7", \
+ "pr8", "pr9", "pr10", "pr11", "pr12", "pr13", "pr14", "pr15", \
+ "lr0", "lr1", "lr2", "lr3", "lr4", "lr5", "lr6", "lr7", \
+ "lr8", "lr9", "lr10", "lr11", "lr12", "lr13", "lr14", "lr15", \
+ "tr0", "tr1", "tr2", "tr3", "tr4", "tr5", "tr6", "tr7", \
+ "tr8", "tr9", "tr10", "tr11", "tr12", "tr13", "tr14", "tr15", \
+  "psw", "ksp", "csp"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+/* pseudo-registers: */
+#define PS_REGNUM 64		/* Contains processor status */
+#define PSW_REGNUM 64		/* Contains current psw, whatever it is.*/
+#define CSP_REGNUM 65		/* address of this control stack frame*/
+#define KSP_REGNUM 66		/* Contains process's Kernel Stack Pointer */
+
+#define CFP_REGNUM 13		/* Current data-stack frame ptr */
+#define TR0_REGNUM 48		/* After function call, contains
+				   function result */
+
+/* Registers interesting to the machine-independent part of gdb*/
+
+#define FP_REGNUM CSP_REGNUM	/* Contains address of executing (control)
+				   stack frame */
+#define SP_REGNUM 14		/* Contains address of top of stack -??*/
+#define PC_REGNUM 15		/* Contains program counter */
+
+/* Define DO_REGISTERS_INFO() to do machine-specific formatting
+   of register dumps. */
+
+#define DO_REGISTERS_INFO(_regnum, fp) pyr_do_registers_info(_regnum, fp)
+
+/* need this so we can find the global registers: they never get saved. */
+extern unsigned int global_reg_offset;
+extern unsigned int last_frame_offset;
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (NUM_REGS*4)
+
+/* the Pyramid has register windows.  */
+
+#define HAVE_REGISTER_WINDOWS
+
+/* Is this register part of the register window system?  A yes answer
+   implies that 1) The name of this register will not be the same in
+   other frames, and 2) This register is automatically "saved" (out
+   registers shifting into ins counts) upon subroutine calls and thus
+   there is no need to search more than one stack frame for it. */
+
+#define REGISTER_IN_WINDOW_P(regnum)	\
+  ((regnum) >= 16 && (regnum) < 64)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the Pyramid, all regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the Pyramid, all regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
+
+/* FIXME: It seems impossible for both EXTRACT_RETURN_VALUE and
+   STORE_RETURN_VALUE to be correct. */
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+/****FIXME****/
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (TR0_REGNUM, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+/* Note that on a register-windowing machine (eg, Pyr, SPARC), this is
+   where the value is found after the function call -- ie, it should
+   correspond to GNU CC's FUNCTION_VALUE rather than FUNCTION_OUTGOING_VALUE.*/
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, ((int *)(REGBUF))+TR0_REGNUM, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+/* on pyrs, values are returned in */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(TR0_REGNUM), VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+/* FIXME */
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  ( ((int *)(REGBUF)) [TR0_REGNUM])
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+#define EXTRA_FRAME_INFO \
+	CORE_ADDR bottom;	\
+	CORE_ADDR frame_cfp;	\
+	CORE_ADDR frame_window_addr;
+
+/* The bottom field is misnamed, since it might imply that memory from
+   bottom to frame contains this frame.  That need not be true if
+   stack frames are allocated in different segments (e.g. some on a
+   stack, some on a heap in the data segment).  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  \
+do {								\
+  (fci)->frame_window_addr = (fci)->frame;			\
+  (fci)->bottom =						\
+	  ((fci)->next ?					\
+	   ((fci)->frame == (fci)->next->frame ?			\
+	    (fci)->next->bottom : (fci)->next->frame) :		\
+	   read_register (SP_REGNUM));				\
+  (fci)->frame_cfp =						\
+	  read_register (CFP_REGNUM);				\
+  /***fprintf (stderr,						\
+	   "[[creating new frame for %0x,pc=%0x,csp=%0x]]\n",	\
+	   (fci)->frame, (fci)->pc,(fci)->frame_cfp);*/		\
+} while (0);
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the pyr, the frame's nominal address is the address
+   of parameter register 0.  The previous frame is found 32 words up.   */
+
+#define FRAME_CHAIN(thisframe)	\
+  ( (thisframe) -> frame - CONTROL_STACK_FRAME_SIZE)
+
+ /*((thisframe) >= CONTROL_STACK_ADDR))*/
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.
+
+   I do not understand what this means on a Pyramid, where functions
+   *always* have a control-stack frame, but may or may not have a
+   frame on the data stack.  Since GBD uses the value of the
+   control stack pointer as its "address" of a frame, FRAMELESS
+   is always 1, so does not need to be defined.  */
+
+
+/* Where is the PC for a specific frame */
+
+#define FRAME_SAVED_PC(fi) \
+  ((CORE_ADDR) (read_memory_integer ( (fi) -> frame + 60, 4)))
+
+/* There may be bugs in FRAME_ARGS_ADDRESS and FRAME_LOCALS_ADDRESS;
+   or there may be bugs in accessing the registers that break
+   their definitions.
+   Having the macros expand into functions makes them easier to debug.
+   When the bug is finally located, the inline macro defintions can
+   be un-#if 0ed, and frame_args_addr and frame_locals_address can
+   be deleted from pyr-dep.c */ 
+
+/* If the argument is on the stack, it will be here.  */
+#define FRAME_ARGS_ADDRESS(fi) \
+  frame_args_addr(fi)
+
+#define FRAME_LOCALS_ADDRESS(fi) \
+  frame_locals_address(fi)
+
+/* The following definitions doesn't seem to work.
+   I don't understand why. */
+#if 0
+#define FRAME_ARGS_ADDRESS(fi) \
+   /*(FRAME_FP(fi) + (13*4))*/ (read_register (CFP_REGNUM))
+
+#define FRAME_LOCALS_ADDRESS(fi) \
+  ((fi)->frame +(16*4))
+
+#endif /* 0 */
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(val, fi)  (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   Note that on register window machines, we are currently making the
+   assumption that window registers are being saved somewhere in the
+   frame in which they are being used.  If they are stored in an
+   inferior frame, find_saved_register will break.
+
+   On pyrs, frames of window registers are stored contiguously on a
+   separate stack.  All window registers are always stored.
+   The pc and psw (gr15 and gr14)  are also always saved: the call
+   insn saves them in pr15 and pr14 of the new frame (tr15,tr14 of the
+   old frame).  
+   The data-stack frame pointer (CFP) is only saved in functions which
+   allocate a (data)stack frame (with "adsf").  We detect them by
+   looking at the first insn of the procedure. 
+
+   Other non-window registers (gr0-gr11) are never saved.  Pyramid's C
+   compiler and gcc currently ignore them, so it's not an issue.   */ 
+
+#define FRAME_FIND_SAVED_REGS(fi_p, frame_saved_regs) \
+{  register int regnum;							\
+  register CORE_ADDR pc;						\
+  register CORE_ADDR fn_start_pc;					\
+  register int first_insn;						\
+  register CORE_ADDR prev_cf_addr;					\
+  register int window_ptr;						\
+  if (!fi_p) fatal ("Bad frame info struct in FRAME_FIND_SAVED_REGS");	\
+  memset (&(frame_saved_regs), '\0', sizeof (frame_saved_regs));		\
+									\
+  window_ptr = prev_cf_addr = FRAME_FP(fi_p);				\
+									\
+  for (regnum = 16 ; regnum < 64; regnum++,window_ptr+=4)		\
+  {									\
+    (frame_saved_regs).regs[regnum] = window_ptr;			\
+  }									\
+									\
+  /* In each window, psw, and pc are "saved" in tr14,tr15. */		\
+  /*** psw is sometimes saved in gr12 (so sez <sys/pcb.h>) */		\
+  (frame_saved_regs).regs[PS_REGNUM] = FRAME_FP(fi_p) + (14*4);  	\
+									\
+/*(frame_saved_regs).regs[PC_REGNUM] = (frame_saved_regs).regs[31];*/	\
+  (frame_saved_regs).regs[PC_REGNUM] = FRAME_FP(fi_p) + ((15+32)*4);	\
+									\
+  /* Functions that allocate a frame save sp *where*? */		\
+/*first_insn = read_memory_integer (get_pc_function_start ((fi_p)->pc),4); */ \
+									\
+  fn_start_pc = (get_pc_function_start ((fi_p)->pc));			\
+  first_insn = read_memory_integer(fn_start_pc, 4);			\
+									\
+  if (0x08 == ((first_insn >> 20) &0x0ff)) {				\
+    /* NB: because WINDOW_REGISTER_P(cfp) is false, a saved cfp		\
+       in this frame is only visible in this frame's callers.		\
+       That means the cfp we mark saved is my caller's cfp, ie pr13.	\
+       I don't understand why we don't have to do that for pc, too.  */	\
+									\
+    (frame_saved_regs).regs[CFP_REGNUM] = FRAME_FP(fi_p)+(13*4);	\
+									\
+    (frame_saved_regs).regs[SP_REGNUM] =				\
+	  read_memory_integer (FRAME_FP(fi_p)+((13+32)*4),4);		\
+  }									\
+									\
+/*									\
+ *(frame_saved_regs).regs[CFP_REGNUM] = (frame_saved_regs).regs[61];	\
+ * (frame_saved_regs).regs[SP_REGNUM] =					\
+ *	  read_memory_integer (FRAME_FP(fi_p)+((13+32)*4),4);		\
+ */									\
+									\
+  (frame_saved_regs).regs[CSP_REGNUM] = prev_cf_addr;			\
+}
+
+/* Things needed for making the inferior call functions.  */
+#if 0
+/* These are all lies.  These macro definitions are appropriate for a
+    SPARC. On a pyramid, pushing a dummy frame will
+   surely involve writing the control stack pointer,
+   then saving the pc.  This requires a privileged instruction.
+   Maybe one day Pyramid can be persuaded to add a syscall to do this.
+   Until then, we are out of luck. */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);\
+  register int regnum;				    \
+  sp = push_word (sp, 0); /* arglist */		    \
+  for (regnum = 11; regnum >= 0; regnum--)	    \
+    sp = push_word (sp, read_register (regnum));    \
+  sp = push_word (sp, read_register (PC_REGNUM));   \
+  sp = push_word (sp, read_register (FP_REGNUM));   \
+/*  sp = push_word (sp, read_register (AP_REGNUM));*/   \
+  sp = push_word (sp, (read_register (PS_REGNUM) & 0xffef)   \
+		      + 0x2fff0000);		    \
+  sp = push_word (sp, 0); 			    \
+  write_register (SP_REGNUM, sp);		    \
+  write_register (FP_REGNUM, sp);		    \
+/*  write_register (AP_REGNUM, sp + 17 * sizeof (int));*/ }
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register CORE_ADDR fp = read_register (FP_REGNUM);		 \
+  register int regnum;						 \
+  register int regmask = read_memory_integer (fp + 4, 4);	 \
+  write_register (PS_REGNUM, 					 \
+		  (regmask & 0xffff)				 \
+		  | (read_register (PS_REGNUM) & 0xffff0000));	 \
+  write_register (PC_REGNUM, read_memory_integer (fp + 16, 4));  \
+  write_register (FP_REGNUM, read_memory_integer (fp + 12, 4));  \
+/*  write_register (AP_REGNUM, read_memory_integer (fp + 8, 4));*/   \
+  fp += 16;							 \
+  for (regnum = 0; regnum < 12; regnum++)			 \
+    if (regmask & (0x10000 << regnum))				 \
+      write_register (regnum, read_memory_integer (fp += 4, 4)); \
+  fp = fp + 4 + ((regmask >> 30) & 3);				 \
+  if (regmask & 0x20000000)					 \
+    { regnum = read_memory_integer (fp, 4);			 \
+      fp += (regnum + 1) * 4; }					 \
+  write_register (SP_REGNUM, fp);				 \
+  set_current_frame (read_register (FP_REGNUM)); }
+
+/* This sequence of words is the instructions
+     calls #69, @#32323232
+     bpt
+   Note this is 8 bytes.  */
+
+#define CALL_DUMMY {0x329f69fb, 0x03323232}
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ *((char *) dummyname + 1) = nargs;		\
+  *(int *)((char *) dummyname + 3) = fun; }
+#endif /* 0 */
+
+#define POP_FRAME \
+  { error ("The return command is not supported on this machine."); }
diff --git a/gdb/config/pyr/xm-pyr.h b/gdb/config/pyr/xm-pyr.h
new file mode 100644
index 0000000..f45d10a
--- /dev/null
+++ b/gdb/config/pyr/xm-pyr.h
@@ -0,0 +1,92 @@
+/* Definitions to make GDB run on a Pyramidax under OSx 4.0 (4.2bsd).
+   Copyright 1988, 1989, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Define PYRAMID_CONTROL_FRAME_DEBUGGING to get copious messages
+   about reading the control stack on standard output. This
+   makes gdb unusable as a debugger. */
+
+/* #define PYRAMID_CONTROL_FRAME_DEBUGGING */
+
+/* Define PYRAMID_FRAME_DEBUGGING for ? */
+
+/* use Pyramid's slightly strange ptrace */
+#define PYRAMID_PTRACE
+
+/* Traditional Unix virtual address spaces have thre regions: text,
+   data and stack.  The text, initialised data, and uninitialised data
+   are represented in separate segments of the a.out file.
+   When a process dumps core, the data and stack regions are written
+   to a core file.  This gives a debugger enough information to
+   reconstruct (and debug) the virtual address space at the time of
+   the coredump.
+   Pyramids have an distinct fourth region of the virtual address
+   space, in which the contents of the windowed registers are stacked
+   in fixed-size frames.  Pyramid refer to this region as the control
+   stack.  Each call (or trap) automatically allocates a new register
+   frame; each return deallocates the current frame and restores the
+   windowed registers to their values before the call.
+
+   When dumping core, the control stack is written to a core files as
+   a third segment. The core-handling functions need to know to deal
+   with it. */ 
+
+/* Tell dep.c what the extra segment is.  */
+#define PYRAMID_CORE
+
+#define NO_SIGINTERRUPT
+
+#define HAVE_WAIT_STRUCT
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG))
+
+/* Define offsets of registers in the core file (or maybe u area) */
+#define REGISTER_U_ADDR(addr, blockend, regno)	\
+{ struct user __u;					\
+  addr = blockend  + (regno - 16 ) * 4;			\
+  if (regno == 67) {   					\
+      printf("\\geting reg 67\\");			\
+      addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u;	\
+  } else if (regno == KSP_REGNUM) {			\
+      printf("\\geting KSP (reg %d)\\", KSP_REGNUM);	\
+      addr = (int)(&__u.u_pcb.pcb_ksp) - (int) &__u;	\
+  } else if (regno == CSP_REGNUM) {			\
+      printf("\\geting CSP (reg %d\\",CSP_REGNUM);	\
+      addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u;	\
+  } else if (regno == 64) {				\
+      printf("\\geting reg 64\\");			\
+      addr = (int)(&__u.u_pcb.pcb_csp) - (int) &__u;	\
+   } else if (regno == PS_REGNUM)			\
+      addr = blockend - 4;				\
+  else if (1 && ((16 > regno) && (regno > 11)))		\
+      addr = last_frame_offset + (4 *(regno+32));	\
+  else if (0 && (12 > regno)) 				\
+      addr = global_reg_offset + (4 *regno);		\
+  else if (16 > regno)	 				\
+      addr = global_reg_offset + (4 *regno);		\
+ else							\
+      addr = blockend  + (regno - 16 ) * 4;		\
+}
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+#define FETCH_INFERIOR_REGISTERS
diff --git a/gdb/config/romp/rtbsd.mh b/gdb/config/romp/rtbsd.mh
new file mode 100644
index 0000000..003c42f
--- /dev/null
+++ b/gdb/config/romp/rtbsd.mh
@@ -0,0 +1,8 @@
+# IBM RT/PC running BSD unix. 
+# This file contributed at NYU, where we are using the RT to remote
+# debug an a29k running unix.  No attempt, as of 7/16/91, has been made
+# to support debugging of RT executables.
+XDEPFILES corelow.o core-aout.o infptrace.o inftarg.o fork-child.o
+MH_CFLAGS=-DHOSTING_ONLY	# No debugging of RT executables 
+XM_FILE= xm-rtbsd.h
+CC=gcc -traditional		# hc/pcc just can't cut it.
diff --git a/gdb/config/romp/xm-rtbsd.h b/gdb/config/romp/xm-rtbsd.h
new file mode 100644
index 0000000..d99b57f
--- /dev/null
+++ b/gdb/config/romp/xm-rtbsd.h
@@ -0,0 +1,40 @@
+/* Definitions to host GDB on an IBM RT/PC running BSD Unix. 
+   Copyright 1986, 1987, 1989, 1991, 1992  Free Software Foundation, Inc.
+   Contributed by David Wood @ New York University (wood@lab.ultra.nyu.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This machine is most significant byte first */
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* This OS has the wait structure */
+#define HAVE_WAIT_STRUCT
+
+#ifdef HOSTING_ONLY
+/*
+ * This next two defines are to get GDB up and running as a host to
+ * do remote debugging.  I know there is a gdb for the RT, but there wasn't
+ * an xconfig/rt* file.  
+ */
+#define KERNEL_U_ADDR_BSD  /* This may be correct, but hasn't been tested */
+#define REGISTER_U_ADDR(a,b,c)	   \
+	(printf("GDB can not debug IBM RT/PC BSD executables (yet)\n"),\
+	quit(),0)
+#else
+# include	"GDB for the RT is not included in the distribution" 
+#endif
+
diff --git a/gdb/config/rs6000/aix4.mh b/gdb/config/rs6000/aix4.mh
new file mode 100644
index 0000000..c5bc2da
--- /dev/null
+++ b/gdb/config/rs6000/aix4.mh
@@ -0,0 +1,11 @@
+# Host: IBM RS/6000 running AIX4
+
+XM_FILE= xm-aix4.h
+XDEPFILES= 
+
+NAT_FILE= nm-rs6000.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o
+
+# When compiled with cc, for debugging, this argument should be passed.
+# We have no idea who our current compiler is though, so we skip it.
+# MH_CFLAGS = -bnodelcsect
diff --git a/gdb/config/rs6000/aix4.mt b/gdb/config/rs6000/aix4.mt
new file mode 100644
index 0000000..f213f0f
--- /dev/null
+++ b/gdb/config/rs6000/aix4.mt
@@ -0,0 +1,3 @@
+# Target: IBM RS/6000 running AIX4
+TDEPFILES= rs6000-tdep.o xcoffsolib.o xcoffread.o
+TM_FILE= tm-rs6000-aix4.h
diff --git a/gdb/config/rs6000/nm-rs6000.h b/gdb/config/rs6000/nm-rs6000.h
new file mode 100644
index 0000000..cf0d53d
--- /dev/null
+++ b/gdb/config/rs6000/nm-rs6000.h
@@ -0,0 +1,60 @@
+/* IBM RS/6000 native-dependent macros for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+#define PTRACE_ATTACH PT_ATTACH
+#define PTRACE_DETACH PT_DETACH
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* When a child process is just starting, we sneak in and relocate
+   the symbol table (and other stuff) after the dynamic linker has
+   figured out where they go.  */
+
+#define	SOLIB_CREATE_INFERIOR_HOOK(PID)	\
+  do {					\
+    xcoff_relocate_symtab (PID);	\
+  } while (0)
+
+/* When a target process or core-file has been attached, we sneak in
+   and figure out where the shared libraries have got to.  */
+
+#define	SOLIB_ADD(a, b, c)	\
+  if (inferior_pid)	\
+    /* Attach to process.  */  \
+    xcoff_relocate_symtab (inferior_pid); \
+  else		\
+    /* Core file.  */ \
+    xcoff_relocate_core (c);
+
+extern void xcoff_relocate_symtab PARAMS ((unsigned int));
+#ifdef __STDC__
+struct target_ops;
+#endif
+extern void xcoff_relocate_core PARAMS ((struct target_ops *));
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
diff --git a/gdb/config/rs6000/nm-rs6000ly.h b/gdb/config/rs6000/nm-rs6000ly.h
new file mode 100644
index 0000000..4159822
--- /dev/null
+++ b/gdb/config/rs6000/nm-rs6000ly.h
@@ -0,0 +1,25 @@
+/* Native-dependent definitions for RS6000 running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_RS6000LYNX_H
+#define NM_RS6000LYNX_H
+
+#include "nm-lynx.h"
+
+#endif /* NM_RS6000LYNX_H */
diff --git a/gdb/config/rs6000/rs6000.mh b/gdb/config/rs6000/rs6000.mh
new file mode 100644
index 0000000..600d616
--- /dev/null
+++ b/gdb/config/rs6000/rs6000.mh
@@ -0,0 +1,11 @@
+# Host: IBM RS/6000 running AIX
+
+XM_FILE= xm-rs6000.h
+XDEPFILES= 
+
+NAT_FILE= nm-rs6000.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o rs6000-nat.o
+
+# When compiled with cc, for debugging, this argument should be passed.
+# We have no idea who our current compiler is though, so we skip it.
+# MH_CFLAGS = -bnodelcsect
diff --git a/gdb/config/rs6000/rs6000.mt b/gdb/config/rs6000/rs6000.mt
new file mode 100644
index 0000000..a2294b2
--- /dev/null
+++ b/gdb/config/rs6000/rs6000.mt
@@ -0,0 +1,3 @@
+# Target: IBM RS/6000 running AIX
+TDEPFILES= rs6000-tdep.o xcoffsolib.o xcoffread.o
+TM_FILE= tm-rs6000.h
diff --git a/gdb/config/rs6000/rs6000lynx.mh b/gdb/config/rs6000/rs6000lynx.mh
new file mode 100644
index 0000000..b938152
--- /dev/null
+++ b/gdb/config/rs6000/rs6000lynx.mh
@@ -0,0 +1,11 @@
+# Host: RS6000 running LynxOS
+
+XM_FILE= xm-rs6000ly.h
+XDEPFILES= ser-tcp.o
+XM_CLIBS= -lbsd
+
+NAT_FILE= nm-rs6000ly.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o xcoffread.o
+
+GDBSERVER_LIBS= -lbsd
+GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/rs6000/rs6000lynx.mt b/gdb/config/rs6000/rs6000lynx.mt
new file mode 100644
index 0000000..978030c
--- /dev/null
+++ b/gdb/config/rs6000/rs6000lynx.mt
@@ -0,0 +1,3 @@
+# Target: IBM RS6000 running LynxOS
+TDEPFILES= coff-solib.o rs6000-tdep.o
+TM_FILE= tm-rs6000ly.h
diff --git a/gdb/config/rs6000/tm-rs6000-aix4.h b/gdb/config/rs6000/tm-rs6000-aix4.h
new file mode 100644
index 0000000..f65eae3
--- /dev/null
+++ b/gdb/config/rs6000/tm-rs6000-aix4.h
@@ -0,0 +1,26 @@
+/* Macro definitions for RS/6000 running AIX4.
+   Copyright 1995, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#ifndef TM_RS6000_AIX4_H
+#define TM_RS6000_AIX4_H
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+
+#endif /* TM_RS6000_AIX4_H */
diff --git a/gdb/config/rs6000/tm-rs6000.h b/gdb/config/rs6000/tm-rs6000.h
new file mode 100644
index 0000000..52beec1
--- /dev/null
+++ b/gdb/config/rs6000/tm-rs6000.h
@@ -0,0 +1,564 @@
+/* Parameters for target execution on an RS6000, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1997
+   Free Software Foundation, Inc.
+   Contributed by IBM Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct frame_info;
+struct type;
+struct value;
+#endif
+
+/* Minimum possible text address in AIX */
+
+#define TEXT_SEGMENT_BASE	0x10000000
+
+/* Load segment of a given pc value. */
+
+#define	PC_LOAD_SEGMENT(PC)	pc_load_segment_name(PC)
+extern char *pc_load_segment_name PARAMS ((CORE_ADDR));
+
+/* AIX cc seems to get this right.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* return true if a given `pc' value is in `call dummy' function. */
+/* FIXME: This just checks for the end of the stack, which is broken
+   for things like stepping through gcc nested function stubs.  */
+#define	PC_IN_CALL_DUMMY(STOP_PC, STOP_SP, STOP_FRAME_ADDR)	\
+	(STOP_SP < STOP_PC && STOP_PC < STACK_END_ADDR)
+
+#if 0
+extern unsigned int text_start, data_start;
+extern char *corefile;
+#endif
+extern int inferior_pid;
+
+/* We are missing register descriptions in the system header files. Sigh! */
+
+struct regs {
+	int	gregs [32];		/* general purpose registers */
+	int	pc;			/* program conter	*/
+	int	ps;			/* processor status, or machine state */
+};
+
+struct fp_status {
+	double	fpregs [32];		/* floating GP registers */
+};
+
+
+/* To be used by skip_prologue. */
+
+struct rs6000_framedata {
+  int	offset;				/* total size of frame --- the distance
+					   by which we decrement sp to allocate
+					   the frame */
+  int	saved_gpr;			/* smallest # of saved gpr */
+  int	saved_fpr;			/* smallest # of saved fpr */
+  int	alloca_reg;			/* alloca register number (frame ptr) */
+  char	frameless;			/* true if frameless functions. */
+  char	nosavedpc;			/* true if pc not saved. */
+  int	gpr_offset;			/* offset of saved gprs from prev sp */
+  int	fpr_offset;			/* offset of saved fprs from prev sp */
+  int	lr_offset;			/* offset of saved lr */
+  int	cr_offset;			/* offset of saved cr */
+};
+
+/* Define the byte order of the machine.  */
+
+#define TARGET_BYTE_ORDER_DEFAULT	BIG_ENDIAN
+
+/* AIX's assembler doesn't grok dollar signs in identifiers.
+   So we use dots instead.  This item must be coordinated with G++. */
+#undef CPLUS_MARKER
+#define CPLUS_MARKER '.'
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)						\
+do {									\
+  struct rs6000_framedata _frame;					\
+  pc = skip_prologue (pc, &_frame);					\
+} while (0)
+
+extern CORE_ADDR skip_prologue PARAMS((CORE_ADDR, struct rs6000_framedata *));
+
+
+/* If PC is in some function-call trampoline code, return the PC
+   where the function itself actually starts.  If not, return NULL.  */
+
+#define	SKIP_TRAMPOLINE_CODE(pc)	skip_trampoline_code (pc)
+extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR));
+
+/* Number of trap signals we need to skip over, once the inferior process
+   starts running. */
+
+#define	START_INFERIOR_TRAPS_EXPECTED	2
+
+/* AIX has a couple of strange returns from wait().  */
+
+#define CHILD_SPECIAL_WAITSTATUS(ourstatus, hoststatus) ( \
+  /* "stop after load" status.  */ \
+  (hoststatus) == 0x57c ? (ourstatus)->kind = TARGET_WAITKIND_LOADED, 1 : \
+  \
+  /* signal 0. I have no idea why wait(2) returns with this status word.  */ \
+  /* It looks harmless. */ \
+  (hoststatus) == 0x7f ? (ourstatus)->kind = TARGET_WAITKIND_SPURIOUS, 1 : \
+  \
+  /* A normal waitstatus.  Let the usual macros deal with it.  */ \
+  0)
+
+/* In xcoff, we cannot process line numbers when we see them. This is
+   mainly because we don't know the boundaries of the include files. So,
+   we postpone that, and then enter and sort(?) the whole line table at
+   once, when we are closing the current symbol table in end_symtab(). */
+
+#define	PROCESS_LINENUMBER_HOOK()	aix_process_linenos ()
+extern void aix_process_linenos PARAMS ((void));
+   
+/* Immediately after a function call, return the saved pc.
+   Can't go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define	SAVED_PC_AFTER_CALL(frame) read_register (LR_REGNUM)
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR 0x2ff80000
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* This is how arguments pushed onto stack or passed in registers.
+   Stack must be aligned on 64-bit boundaries when synthesizing
+   function calls.  We don't need STACK_ALIGN, PUSH_ARGUMENTS will
+   handle it. */
+
+#define	PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+  sp = push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR push_arguments PARAMS ((int, struct value **, CORE_ADDR,
+					 int, CORE_ADDR));
+
+/* BREAKPOINT_FROM_PC uses the program counter value to determine the
+   breakpoint that should be used */
+extern breakpoint_from_pc_fn rs6000_breakpoint_from_pc;
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) rs6000_breakpoint_from_pc (pcptr, lenptr)
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+#define REGISTER_SIZE 4
+
+
+/* Return the name of register number REG.  This may return "" to
+   indicate a register number that's not used on this variant.
+   (Register numbers may be sparse for consistency between variants.)  */
+#define REGISTER_NAME(reg) (rs6000_register_name(reg))
+extern char *rs6000_register_name (int reg);
+
+/* Number of machine registers */
+#define NUM_REGS 183
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define FP_REGNUM 1		/* Contains address of executing stack frame */
+#define SP_REGNUM 1		/* Contains address of top of stack */
+#define	TOC_REGNUM 2		/* TOC register */
+#define FP0_REGNUM 32		/* Floating point register 0 */
+#define	GP0_REGNUM 0		/* GPR register 0 */
+#define FP0_REGNUM 32		/* FPR (Floating point) register 0 */
+#define FPLAST_REGNUM 63	/* Last floating point register */  
+
+/* Special purpose registers... */
+/* P.S. keep these in the same order as in /usr/mstsave.h `mstsave'
+   structure, for easier processing */
+
+#define PC_REGNUM 64		/* Program counter (instruction address %iar)*/
+#define PS_REGNUM 65		/* Processor (or machine) status (%msr) */
+#define	CR_REGNUM 66		/* Condition register */
+#define	LR_REGNUM 67		/* Link register */
+#define	CTR_REGNUM 68		/* Count register */
+#define	XER_REGNUM 69		/* Fixed point exception registers */
+#define	MQ_REGNUM 70		/* Multiply/quotient register */
+
+/* These #defines are used to parse core files and talk to ptrace, so they
+   must remain fixed.  */
+#define	FIRST_UISA_SP_REGNUM 64	/* first special register number */
+#define LAST_UISA_SP_REGNUM  70	/* last special register number */
+
+/* This is the offset in REG_NAMES at which the `set processor'
+   command starts plugging in its names.  */
+#define FIRST_VARIANT_REGISTER 66
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.
+	     32 4-byte gpr's
+	     32 8-byte fpr's
+	     7  4-byte UISA special purpose registers, 
+	     16 4-byte segment registers,
+	     32 4-byte standard OEA special-purpose registers,
+   and up to 64 4-byte non-standard OEA special purpose regs.
+   total: (+ (* 32 4) (* 32 8) (* 7 4) (* 16 4) (* 32 4) (* 64 4)) 860 bytes
+   Keep some extra space for now, in case to add more. */
+#define REGISTER_BYTES 880
+
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  \
+ (								\
+  ((N) > FPLAST_REGNUM) ? ((((N) - FPLAST_REGNUM -1) * 4) + 384)\
+  :((N) >= FP0_REGNUM) ? ((((N) - FP0_REGNUM) * 8) + 128)	\
+  :((N) * 4) )
+
+/* Number of bytes of storage in the actual machine representation
+   for register N. */
+/* Note that the unsigned cast here forces the result of the
+   subtraction to very high positive values if N < FP0_REGNUM */
+
+#define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 32 ? 8 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the RS6000, all regs are 4 bytes
+   except the floating point regs which are 8-byte doubles.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 32 ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* convert a dbx stab register number (from `r' declaration) to a gdb REGNUM */
+
+#define STAB_REG_TO_REGNUM(value)	(value)
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.
+   The register format for rs6000 floating point registers is always
+   double, we need a conversion if the memory format is float.  */
+
+#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM && (N) <= FPLAST_REGNUM)
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
+{ \
+  if (TYPE_LENGTH (TYPE) != REGISTER_RAW_SIZE (REGNUM)) \
+    { \
+      double val = extract_floating ((FROM), REGISTER_RAW_SIZE (REGNUM)); \
+      store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+    } \
+  else \
+    memcpy ((TO), (FROM), REGISTER_RAW_SIZE (REGNUM)); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+{ \
+  if (TYPE_LENGTH (TYPE) != REGISTER_RAW_SIZE (REGNUM)) \
+    { \
+      double val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+      store_floating ((TO), REGISTER_RAW_SIZE (REGNUM), val); \
+    } \
+  else \
+    memcpy ((TO), (FROM), REGISTER_RAW_SIZE (REGNUM)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (((unsigned)(N) - FP0_REGNUM) < 32 ? builtin_type_double : builtin_type_int)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+/* in RS6000, struct return addresses are passed as an extra parameter in r3.
+   In function return, callee is not responsible of returning this address back.
+   Since gdb needs to find it, we will store in a designated variable
+   `rs6000_struct_return_address'. */
+
+extern CORE_ADDR rs6000_struct_return_address;
+
+#define STORE_STRUCT_RETURN(ADDR, SP)	\
+  { write_register (3, (ADDR));		\
+    rs6000_struct_return_address = (ADDR); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+/* #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE)) */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  extract_return_value(TYPE,REGBUF,VALBUF)
+extern void extract_return_value PARAMS ((struct type *, char [], char *));
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  {									\
+    if (TYPE_CODE (TYPE) == TYPE_CODE_FLT)				\
+									\
+     /* Floating point values are returned starting from FPR1 and up.	\
+	Say a double_double_double type could be returned in		\
+	FPR1/FPR2/FPR3 triple. */					\
+									\
+      write_register_bytes (REGISTER_BYTE (FP0_REGNUM+1), (VALBUF),	\
+						TYPE_LENGTH (TYPE));	\
+    else								\
+      /* Everything else is returned in GPR3 and up. */			\
+      write_register_bytes (REGISTER_BYTE (GP0_REGNUM+3), (VALBUF),	\
+						TYPE_LENGTH (TYPE));	\
+  }
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF)	rs6000_struct_return_address
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the RS6000, the frame's nominal address
+   is the address of a 4-byte word containing the calling frame's address.  */
+
+#define FRAME_CHAIN(thisframe) rs6000_frame_chain (thisframe)
+CORE_ADDR rs6000_frame_chain PARAMS ((struct frame_info *));
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  FRAMELESS = frameless_function_invocation (FI)
+
+extern int frameless_function_invocation PARAMS((struct frame_info *));
+
+#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
+  prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \
+	      prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+#define INIT_FRAME_PC(fromleaf, prev) /* nothing */
+extern void rs6000_init_extra_frame_info (int fromleaf, struct frame_info *);
+#define	INIT_EXTRA_FRAME_INFO(fromleaf, fi) rs6000_init_extra_frame_info (fromleaf, fi)
+
+/* If the kernel has to deliver a signal, it pushes a sigcontext
+   structure on the stack and then calls the signal handler, passing
+   the address of the sigcontext in an argument register. Usually
+   the signal handler doesn't save this register, so we have to
+   access the sigcontext structure via an offset from the signal handler
+   frame.
+   The following constants were determined by experimentation on AIX 3.2.  */
+#define SIG_FRAME_PC_OFFSET 96
+#define SIG_FRAME_LR_OFFSET 108
+#define SIG_FRAME_FP_OFFSET 284
+
+/* Default offset from SP where the LR is stored */
+#define	DEFAULT_LR_SAVE 8
+
+/* Return saved PC from a frame */
+#define FRAME_SAVED_PC(FRAME)  frame_saved_pc (FRAME)
+
+extern unsigned long frame_saved_pc PARAMS ((struct frame_info *));
+
+extern CORE_ADDR rs6000_frame_args_address PARAMS ((struct frame_info *));
+#define FRAME_ARGS_ADDRESS(FI) rs6000_frame_args_address (FI)
+
+#define FRAME_LOCALS_ADDRESS(FI)	FRAME_ARGS_ADDRESS(FI)
+
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8	/* Not sure on this. FIXMEmgo */
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+/* In the following implementation for RS6000, we did *not* save sp. I am
+   not sure if it will be needed. The following macro takes care of gpr's
+   and fpr's only. */
+
+extern void rs6000_frame_init_saved_regs PARAMS ((struct frame_info *));
+#define FRAME_INIT_SAVED_REGS(FI) rs6000_frame_init_saved_regs (FI)
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+/* Change these names into rs6k_{push, pop}_frame(). FIXMEmgo. */
+
+#define PUSH_DUMMY_FRAME	push_dummy_frame ()
+extern void push_dummy_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, 
+   restoring all saved registers.  */
+
+#define POP_FRAME	pop_frame ()
+extern void pop_frame PARAMS ((void));
+
+/* This sequence of words is the instructions:
+
+	mflr	r0		// 0x7c0802a6
+				// save fpr's
+	stfd	r?, num(r1)	// 0xd8010000 there should be 32 of this??
+				// save gpr's
+	stm	r0, num(r1)	// 0xbc010000
+	stu	r1, num(r1)	// 0x94210000
+
+	// the function we want to branch might be in a different load 
+	// segment. reset the toc register. Note that the actual toc address
+	// will be fix by fix_call_dummy () along with function address.
+
+	st	r2, 0x14(r1)	// 0x90410014 save toc register
+	liu	r2, 0x1234	// 0x3c401234 reset a new toc value 0x12345678
+	oril	r2, r2,0x5678   // 0x60425678	
+
+				// load absolute address 0x12345678 to r0
+	liu	r0, 0x1234	// 0x3c001234
+	oril	r0, r0,0x5678	// 0x60005678
+	mtctr	r0		// 0x7c0903a6 ctr <- r0
+	bctrl			// 0x4e800421 jump subroutine 0x12345678 (%ctr)
+	cror	0xf, 0xf, 0xf	// 0x4def7b82
+	brpt			// 0x7d821008, breakpoint
+	cror	0xf, 0xf, 0xf	// 0x4def7b82 (for 8 byte alignment)
+
+
+  We actually start executing by saving the toc register first, since the pushing 
+  of the registers is done by PUSH_DUMMY_FRAME.  If this were real code,
+  the arguments for the function called by the `bctrl' would be pushed
+  between the `stu' and the `bctrl', and we could allow it to execute through.
+  But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is done,
+  and we cannot allow to push the registers again.
+*/
+	
+#define CALL_DUMMY {0x7c0802a6, 0xd8010000, 0xbc010000, 0x94210000, \
+		    0x90410014, 0x3c401234, 0x60425678,		    \
+		    0x3c001234, 0x60005678, 0x7c0903a6, 0x4e800421, \
+		    0x4def7b82, 0x7d821008, 0x4def7b82 }
+
+
+/* keep this as multiple of 8 (%sp requires 8 byte alignment) */
+#define CALL_DUMMY_LENGTH 56
+
+#define CALL_DUMMY_START_OFFSET 16
+
+/* Insert the specified number of args and function address into a
+   call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+  rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+extern void rs6000_fix_call_dummy PARAMS ((char *, CORE_ADDR, CORE_ADDR,
+					   int, struct value **,
+					   struct type *, int));
+
+/* Hook in rs6000-tdep.c for determining the TOC address when
+   calling functions in the inferior.  */
+extern CORE_ADDR (*find_toc_address_hook) PARAMS ((CORE_ADDR));
+
+/* xcoffread.c provides a function to determine the TOC offset
+   for a given object file.
+   It is used under native AIX configurations for determining the
+   TOC address when calling functions in the inferior.  */
+#ifdef __STDC__
+struct objfile;
+#endif
+extern CORE_ADDR get_toc_offset PARAMS ((struct objfile *));
+
+/* Usually a function pointer's representation is simply the address
+   of the function. On the RS/6000 however, a function pointer is
+   represented by a pointer to a TOC entry. This TOC entry contains
+   three words, the first word is the address of the function, the
+   second word is the TOC pointer (r2), and the third word is the
+   static chain value.  Throughout GDB it is currently assumed that a
+   function pointer contains the address of the function, which is not
+   easy to fix.  In addition, the conversion of a function address to
+   a function pointer would require allocation of a TOC entry in the
+   inferior's memory space, with all its drawbacks.  To be able to
+   call C++ virtual methods in the inferior (which are called via
+   function pointers), find_function_addr uses this macro to get the
+   function address from a function pointer.  */
+
+#define CONVERT_FROM_FUNC_PTR_ADDR(ADDR) \
+  (is_magic_function_pointer (ADDR) ? read_memory_integer (ADDR, 4) : (ADDR))
+extern int is_magic_function_pointer PARAMS ((CORE_ADDR));
+
+/* Flag for machine-specific stuff in shared files.  FIXME */
+#define IBM6000_TARGET
+
+/* RS6000/AIX does not support PT_STEP.  Has to be simulated.  */
+
+#define SOFTWARE_SINGLE_STEP_P 1
+extern void rs6000_software_single_step PARAMS ((unsigned int, int));
+#define SOFTWARE_SINGLE_STEP(sig,bp_p) rs6000_software_single_step (sig, bp_p)
+
+/* If the current gcc for for this target does not produce correct debugging
+   information for float parameters, both prototyped and unprototyped, then
+   define this macro.  This forces gdb to  always assume that floats are
+   passed as doubles and then converted in the callee.
+
+   For the PowerPC, it appears that the debug info marks the parameters as
+   floats regardless of whether the function is prototyped, but the actual
+   values are always passed in as doubles.  Thus by setting this to 1, both
+   types of calls will work. */
+
+#define COERCE_FLOAT_TO_DOUBLE 1
diff --git a/gdb/config/rs6000/tm-rs6000ly.h b/gdb/config/rs6000/tm-rs6000ly.h
new file mode 100644
index 0000000..0946b0f
--- /dev/null
+++ b/gdb/config/rs6000/tm-rs6000ly.h
@@ -0,0 +1,32 @@
+/* Macro definitions for RS6000 running under LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_RS6000LYNX_H
+#define TM_RS6000LYNX_H
+
+#include "tm-lynx.h"
+
+/* Use generic RS6000 definitions. */
+#include "rs6000/tm-rs6000.h"
+
+#undef PC_LOAD_SEGMENT
+
+#define CANNOT_STORE_REGISTER(regno) (regno == PS_REGNUM)
+
+#endif /* TM_RS6000LYNX_H */
diff --git a/gdb/config/rs6000/xm-aix4.h b/gdb/config/rs6000/xm-aix4.h
new file mode 100644
index 0000000..1bc5cae
--- /dev/null
+++ b/gdb/config/rs6000/xm-aix4.h
@@ -0,0 +1,26 @@
+/* Parameters for hosting on an RS6000, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Contributed by IBM Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "xm-aix4.h"
+
+/* AIX 4.x uses nonstandard "int *" as type of third argument to ptrace() */
+
+#define PTRACE_ARG3_TYPE int*
+
diff --git a/gdb/config/rs6000/xm-rs6000.h b/gdb/config/rs6000/xm-rs6000.h
new file mode 100644
index 0000000..44b8b24
--- /dev/null
+++ b/gdb/config/rs6000/xm-rs6000.h
@@ -0,0 +1,107 @@
+/* Parameters for hosting on an RS6000, for GDB, the GNU debugger.
+   Copyright 1986-87, 1989, 1991-96, 1998 Free Software Foundation, Inc.
+   Contributed by IBM Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The following text is taken from config/rs6000.mh:
+ * # The IBM version of /usr/include/rpc/rpc.h has a bug -- it says
+ * # `extern fd_set svc_fdset;' without ever defining the type fd_set.
+ * # Unfortunately this occurs in the vx-share code, which is not configured
+ * # like the rest of GDB (e.g. it doesn't include "defs.h").
+ * # We circumvent this bug by #define-ing fd_set here, but undefining it in
+ * # the xm-rs6000.h file before ordinary modules try to use it.  FIXME, IBM!
+ * MH_CFLAGS='-Dfd_set=int'
+ * So, here we do the undefine...which has to occur before we include
+ * <sys/select.h> below.
+ */
+#undef fd_set
+
+#include <sys/select.h>
+
+/* Big end is at the low address */
+
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+/* At least as of AIX 3.2, we have termios.  */
+#define	HAVE_TERMIOS 1
+/* #define HAVE_TERMIO 1 */
+
+#define	USG 1
+#define	HAVE_SIGSETMASK	1
+
+#define FIVE_ARG_PTRACE
+
+/* This system requires that we open a terminal with O_NOCTTY for it to
+   not become our controlling terminal.  */
+
+#define	USE_O_NOCTTY
+
+/* Brain death inherited from PC's pervades.  */
+#undef NULL
+#define NULL 0
+
+/* The IBM compiler requires this in order to properly compile alloca().  */
+#pragma alloca
+
+/* There is no vfork.  */
+
+#define	vfork	fork
+
+/* Setpgrp() takes arguments, unlike ordinary Sys V's.  */
+
+#define	SETPGRP_ARGS 1
+
+/* AIX doesn't have strdup, so we need to declare it for libiberty */
+extern char *strdup PARAMS ((char *));
+
+/* Signal handler for SIGWINCH `window size changed'. */
+
+#define	SIGWINCH_HANDLER  aix_resizewindow
+extern void aix_resizewindow PARAMS ((int));
+
+/* This doesn't seem to be declared in any header file I can find.  */
+char *termdef PARAMS ((int, int));
+
+/* `lines_per_page' and `chars_per_line' are local to utils.c. Rectify this. */
+
+#define	SIGWINCH_HANDLER_BODY	\
+									\
+/* Respond to SIGWINCH `window size changed' signal, and reset GDB's	\
+   window settings appropriately. */					\
+									\
+void 						\
+aix_resizewindow (signo)			\
+     int signo;					\
+{						\
+  int fd = fileno (stdout);			\
+  if (isatty (fd)) {				\
+    int val;					\
+						\
+    val = atoi (termdef (fd, 'l'));		\
+    if (val > 0)				\
+      lines_per_page = val;			\
+    val = atoi (termdef (fd, 'c'));		\
+    if (val > 0)				\
+      chars_per_line = val;			\
+  }						\
+}
+
+/* setpgrp() messes up controling terminal. The other version of it
+   requires libbsd.a. */
+#define	setpgrp(XX,YY)		setpgid (XX, YY)
+
diff --git a/gdb/config/rs6000/xm-rs6000ly.h b/gdb/config/rs6000/xm-rs6000ly.h
new file mode 100644
index 0000000..f75cfab
--- /dev/null
+++ b/gdb/config/rs6000/xm-rs6000ly.h
@@ -0,0 +1,29 @@
+/* Host-dependent definitions for RS6000 running LynxOS, for GDB.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef XM_RS6000LYNX_H
+#define XM_RS6000LYNX_H
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Get generic LynxOS host definitions. */
+
+#include "xm-lynx.h"
+
+#endif /* XM_RS6000LYNX_H */
diff --git a/gdb/config/sh/sh.mt b/gdb/config/sh/sh.mt
new file mode 100644
index 0000000..a6604d4
--- /dev/null
+++ b/gdb/config/sh/sh.mt
@@ -0,0 +1,6 @@
+# Target: Hitachi Super-H with ICE and simulator
+TDEPFILES= sh-tdep.o monitor.o sh3-rom.o remote-e7000.o ser-e7kpc.o dsrec.o
+TM_FILE= tm-sh.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/sh/libsim.a
diff --git a/gdb/config/sh/tm-sh.h b/gdb/config/sh/tm-sh.h
new file mode 100644
index 0000000..2177909
--- /dev/null
+++ b/gdb/config/sh/tm-sh.h
@@ -0,0 +1,281 @@
+/* Target-specific definition for a Hitachi Super-H.
+   Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct value;
+struct type;
+#endif
+
+#define GDB_TARGET_IS_SH
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER_SELECTABLE
+
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR sh_skip_prologue ();
+#define SKIP_PROLOGUE(ip) \
+    {(ip) = sh_skip_prologue(ip);}
+
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions. 
+
+   The return address is the value saved in the PR register + 4  */
+
+#define SAVED_PC_AFTER_CALL(frame) (ADDR_BITS_REMOVE(read_register(PR_REGNUM)))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Illegal instruction - used by the simulator for breakpoint
+   detection */
+
+#define BREAKPOINT {0xc3, 0xc3}  /* 0xc3c3 is trapa #c3, and it works in big 
+				    and little endian modes  */
+
+#define BIG_REMOTE_BREAKPOINT    { 0xc3, 0x20 }
+#define LITTLE_REMOTE_BREAKPOINT { 0x20, 0xc3 }
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are.  */
+#define REGISTER_TYPE  long
+
+/* Say how much memory is needed to store a copy of the register set */
+#define REGISTER_BYTES    (NUM_REGS*4) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+	((((N) >= FP0_REGNUM && (N) <= FP15_REGNUM)	\
+	  || (N) == FPUL_REGNUM)			\
+	 ? builtin_type_float : builtin_type_int)
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+extern char **sh_register_names;
+#define REGISTER_NAME(i) sh_register_names[i]
+
+#define NUM_REGS 59
+
+/* Register numbers of various important registers.  Note that some of
+   these values are "real" register numbers, and correspond to the
+   general registers of the machine, and some are "phony" register
+   numbers which are too large to be actual register numbers as far as
+   the user is concerned but do serve to get the desired values when
+   passed to read_register.  */
+
+#define R0_REGNUM	0
+#define STRUCT_RETURN_REGNUM 2
+#define ARG0_REGNUM     4
+#define ARGLAST_REGNUM  7
+#define FP_REGNUM 	14
+#define SP_REGNUM 	15
+#define PC_REGNUM 	16
+#define PR_REGNUM 	17
+#define GBR_REGNUM 	18
+#define VBR_REGNUM 	19
+#define MACH_REGNUM 	20
+#define MACL_REGNUM 	21
+#define SR_REGNUM 	22
+#define FPUL_REGNUM	23
+#define FPSCR_REGNUM	24
+#define FP0_REGNUM	25
+#define FP15_REGNUM	40
+#define SSR_REGNUM	41
+#define SPC_REGNUM	42
+#define R0B0_REGNUM	43
+#define R0B1_REGNUM	51
+
+#define NUM_REALREGS	59
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. 
+
+   We store structs through a pointer passed in R0 */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    { write_register (STRUCT_RETURN_REGNUM, (ADDR));  }
+
+extern use_struct_convention_fn sh_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) sh_use_struct_convention (gcc_p, type)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+extern void sh_extract_return_value PARAMS ((struct type *, void *, void *));
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+	sh_extract_return_value (TYPE, REGBUF, VALBUF)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  
+
+   Things always get returned in R0/R1 */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(0), VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+     extract_address (REGBUF, REGISTER_RAW_SIZE (0))
+
+
+/* Define other aspects of the stack frame. 
+   we keep a copy of the worked out return pc lying around, since it
+   is a useful bit of info */
+
+#define EXTRA_FRAME_INFO \
+    CORE_ADDR return_pc; \
+    int leaf_function;   \
+    int f_offset;    
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+    sh_init_extra_frame_info(fromleaf, fi) 
+extern void sh_init_extra_frame_info PARAMS ((int, struct frame_info *));
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_SAVED_PC(FRAME)		((FRAME)->return_pc)
+#define FRAME_ARGS_ADDRESS(fi)   	((fi)->frame)
+#define FRAME_LOCALS_ADDRESS(fi) 	((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+extern void sh_frame_find_saved_regs PARAMS ((struct frame_info *fi, 
+					      struct frame_saved_regs *fsr));
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   sh_frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+#define NAMES_HAVE_UNDERSCORE
+
+typedef unsigned short INSN_WORD;
+
+extern CORE_ADDR sh_push_arguments PARAMS ((int nargs, 
+					    struct value **args, 
+					    CORE_ADDR sp,
+					    unsigned char struct_return,
+					    CORE_ADDR struct_addr));
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_LENGTH            (0)
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define FIX_CALL_DUMMY(DUMMY, STARTADDR, FUNADDR, NARGS, ARGS, TYPE, GCCP) 
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+extern CORE_ADDR sh_push_return_address   PARAMS ((CORE_ADDR, CORE_ADDR));
+#define PUSH_RETURN_ADDRESS(PC, SP)  sh_push_return_address (PC, SP)
+
+
+extern CORE_ADDR sh_frame_chain PARAMS ((struct frame_info *));
+#define FRAME_CHAIN(FRAME)           sh_frame_chain(FRAME)
+#define PUSH_DUMMY_FRAME             generic_push_dummy_frame ()
+#define FRAME_CHAIN_VALID(FP, FRAME) generic_frame_chain_valid (FP, FRAME)
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+    (SP) = sh_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+/* override the standard get_saved_register function with 
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+/* Discard from the stack the innermost frame, restoring all saved
+   registers.  */
+
+extern void sh_pop_frame PARAMS ((void));
+#define POP_FRAME sh_pop_frame();
+
+#define NOP   {0x20, 0x0b}
+
+#define REGISTER_SIZE 4
+
+#define COERCE_FLOAT_TO_DOUBLE 1
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* Need this for WinGDB.  See gdb/mswin/{regdoc.h, gdbwin.c, gui.cpp}.  */
+#define TARGET_SH
diff --git a/gdb/config/sparc/linux.mh b/gdb/config/sparc/linux.mh
new file mode 100644
index 0000000..954398f
--- /dev/null
+++ b/gdb/config/sparc/linux.mh
@@ -0,0 +1,7 @@
+# Host: Sparcstation, running Linux
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-linux.h
+NAT_FILE= nm-linux.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o
+HOST_IPC=-DBSD_IPC
+GDBSERVER_DEPFILES= low-sparc.o
diff --git a/gdb/config/sparc/linux.mt b/gdb/config/sparc/linux.mt
new file mode 100644
index 0000000..ca422e9
--- /dev/null
+++ b/gdb/config/sparc/linux.mt
@@ -0,0 +1,3 @@
+# Target: Sparcstation, running Linux
+TDEPFILES= sparc-tdep.o solib.o
+TM_FILE= tm-linux.h
diff --git a/gdb/config/sparc/nbsd.mh b/gdb/config/sparc/nbsd.mh
new file mode 100644
index 0000000..310838d
--- /dev/null
+++ b/gdb/config/sparc/nbsd.mh
@@ -0,0 +1,6 @@
+# Host: Sun 4 or Sparcstation, running NetBSD
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-nbsd.h
+NAT_FILE= nm-nbsd.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o
+HOST_IPC=-DBSD_IPC
diff --git a/gdb/config/sparc/nbsd.mt b/gdb/config/sparc/nbsd.mt
new file mode 100644
index 0000000..be8a348
--- /dev/null
+++ b/gdb/config/sparc/nbsd.mt
@@ -0,0 +1,3 @@
+# Target: Sun 4 or Sparcstation, running NetBSD
+TDEPFILES= sparc-tdep.o solib.o
+TM_FILE= tm-nbsd.h
diff --git a/gdb/config/sparc/nm-linux.h b/gdb/config/sparc/nm-linux.h
new file mode 100644
index 0000000..b2b2a91
--- /dev/null
+++ b/gdb/config/sparc/nm-linux.h
@@ -0,0 +1,31 @@
+/* Macro definitions for running gdb on a Sparc running Linux.
+   Copyright (C) 1989, 1992, 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <nm-sysv4.h>
+#include "solib.h"
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
+
+/* Linux is svr4ish but not that much */
+#undef USE_PROC_FS      
diff --git a/gdb/config/sparc/nm-nbsd.h b/gdb/config/sparc/nm-nbsd.h
new file mode 100644
index 0000000..016772a
--- /dev/null
+++ b/gdb/config/sparc/nm-nbsd.h
@@ -0,0 +1,57 @@
+/* Native-dependent definitions for Sparc running NetBSD, for GDB.
+   Copyright (C) 1986, 1987, 1989, 1992, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_NBSD_H
+#define NM_NBSD_H
+
+/* Get generic NetBSD native definitions. */
+
+#include "nm-nbsd.h"
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* Before storing, we need to read all the registers.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Make things match up with what is expected in sparc-nat.c.  */
+
+#define regs		trapframe
+#define fp_status	fpstate
+
+#define r_g1		tf_global[1]
+#define r_ps		tf_psr
+#define r_pc		tf_pc
+#define r_npc		tf_npc
+#define r_y		tf_y
+
+#define fpu		fpstate
+#define fpu_regs	fs_regs
+#define fpu_fsr		fs_fsr
+#define fpu_fr		fs_regs
+#define Fpu_fsr		fs_fsr
+#define FPU_FSR_TYPE	int
+
+#define PTRACE_GETREGS	 PT_GETREGS
+#define PTRACE_GETFPREGS PT_GETFPREGS
+#define PTRACE_SETREGS	 PT_SETREGS
+#define PTRACE_SETFPREGS PT_SETFPREGS
+
+#endif /* NM_NBSD_H */
diff --git a/gdb/config/sparc/nm-sparclynx.h b/gdb/config/sparc/nm-sparclynx.h
new file mode 100644
index 0000000..24011dc
--- /dev/null
+++ b/gdb/config/sparc/nm-sparclynx.h
@@ -0,0 +1,25 @@
+/* Native-dependent definitions for Sparc running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef NM_SPARCLYNX_H
+#define NM_SPARCLYNX_H
+
+#include "nm-lynx.h"
+
+#endif /* NM_SPARCLYNX_H */
diff --git a/gdb/config/sparc/nm-sun4os4.h b/gdb/config/sparc/nm-sun4os4.h
new file mode 100644
index 0000000..9da96be
--- /dev/null
+++ b/gdb/config/sparc/nm-sun4os4.h
@@ -0,0 +1,35 @@
+/* Macro definitions for running gdb on a Sun 4 running sunos 4.
+   Copyright (C) 1989, 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Do implement the attach and detach commands.  */
+
+#define ATTACH_DETACH
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+/* Before storing, we need to read all the registers.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Return sizeof user struct to callers in less machine dependent routines */
+
+#define KERNEL_U_SIZE kernel_u_size()
+extern int kernel_u_size PARAMS ((void));
diff --git a/gdb/config/sparc/nm-sun4sol2.h b/gdb/config/sparc/nm-sun4sol2.h
new file mode 100644
index 0000000..f6833f4
--- /dev/null
+++ b/gdb/config/sparc/nm-sun4sol2.h
@@ -0,0 +1,45 @@
+/* Native-dependent definitions for Sparc running SVR4.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Include the generic SVR4 definitions.  */
+
+#include <nm-sysv4.h>
+
+/* Before storing, we need to read all the registers.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
+
+/* Solaris PSRVADDR support does not seem to include a place for nPC.  */
+
+#define PRSVADDR_BROKEN
+
+#ifdef HAVE_THREAD_DB_LIB
+
+#ifdef __STDC__
+struct objfile;
+#endif
+
+#define target_new_objfile(OBJFILE) sol_thread_new_objfile (OBJFILE)
+
+void sol_thread_new_objfile PARAMS ((struct objfile *objfile));
+
+#define FIND_NEW_THREADS sol_find_new_threads
+void sol_find_new_threads PARAMS ((void));
+
+#endif
diff --git a/gdb/config/sparc/sp64.mt b/gdb/config/sparc/sp64.mt
new file mode 100644
index 0000000..8bb1e07
--- /dev/null
+++ b/gdb/config/sparc/sp64.mt
@@ -0,0 +1,9 @@
+# Target: SPARC64
+# solib.o and procfs.o taken out for now.  We don't have shared libraries yet,
+# and the elf version requires procfs.o but the a.out version doesn't.
+# Then again, having procfs.o in a target makefile fragment seems wrong.
+TDEPFILES = sparc-tdep.o
+TM_FILE= tm-sp64.h
+
+# Need gcc for long long support.
+CC = gcc
diff --git a/gdb/config/sparc/sp64sim.mt b/gdb/config/sparc/sp64sim.mt
new file mode 100644
index 0000000..a9c5ac9
--- /dev/null
+++ b/gdb/config/sparc/sp64sim.mt
@@ -0,0 +1,13 @@
+# Target: SPARC64 (with simulator)
+# solib.o and procfs.o taken out for now.  We don't have shared libraries yet,
+# and the elf version requires procfs.o but the a.out version doesn't.
+# Then again, having procfs.o in a target makefile fragment seems wrong.
+TDEPFILES = sparc-tdep.o
+TM_FILE= tm-sp64.h
+
+# Need gcc for long long support.
+CC = gcc
+
+MH_CFLAGS = -I${srcdir}/../sim/sp64
+SIM_OBS = remote-sim.o
+SIM = ../sim/sp64/libsim.a
diff --git a/gdb/config/sparc/sp64sol2.mt b/gdb/config/sparc/sp64sol2.mt
new file mode 100644
index 0000000..ce2f0d8
--- /dev/null
+++ b/gdb/config/sparc/sp64sol2.mt
@@ -0,0 +1,3 @@
+# Target: Ultrasparc, running Solaris 2
+TDEPFILES= sparc-tdep.o
+TM_FILE= tm-sun4sol2.h
diff --git a/gdb/config/sparc/sparc-em.mt b/gdb/config/sparc/sparc-em.mt
new file mode 100644
index 0000000..13b0c6a
--- /dev/null
+++ b/gdb/config/sparc/sparc-em.mt
@@ -0,0 +1,3 @@
+# Target: SPARC embedded
+TDEPFILES= sparc-tdep.o
+TM_FILE= tm-spc-em.h
diff --git a/gdb/config/sparc/sparclet.mt b/gdb/config/sparc/sparclet.mt
new file mode 100644
index 0000000..f08cfd7
--- /dev/null
+++ b/gdb/config/sparc/sparclet.mt
@@ -0,0 +1,3 @@
+# Target: SPARC embedded Sparclet monitor
+TDEPFILES= sparc-tdep.o monitor.o sparclet-rom.o dsrec.o
+TM_FILE= tm-sparclet.h
diff --git a/gdb/config/sparc/sparclite.mt b/gdb/config/sparc/sparclite.mt
new file mode 100644
index 0000000..43cb38c
--- /dev/null
+++ b/gdb/config/sparc/sparclite.mt
@@ -0,0 +1,5 @@
+# Target: Fujitsu SPARClite processor
+TDEPFILES= sparc-tdep.o sparcl-tdep.o 
+TM_FILE= tm-sparclite.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/erc32/libsim.a
diff --git a/gdb/config/sparc/sparclynx.mh b/gdb/config/sparc/sparclynx.mh
new file mode 100644
index 0000000..6fddddd
--- /dev/null
+++ b/gdb/config/sparc/sparclynx.mh
@@ -0,0 +1,11 @@
+# Host: Sparc running LynxOS
+
+XM_FILE= xm-sparclynx.h
+XDEPFILES= ser-tcp.o
+XM_CLIBS= -lbsd
+
+NAT_FILE= nm-sparclynx.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o lynx-nat.o
+
+GDBSERVER_LIBS= -lbsd
+GDBSERVER_DEPFILES= low-lynx.o
diff --git a/gdb/config/sparc/sparclynx.mt b/gdb/config/sparc/sparclynx.mt
new file mode 100644
index 0000000..5e61645
--- /dev/null
+++ b/gdb/config/sparc/sparclynx.mt
@@ -0,0 +1,3 @@
+# Target: Sparc running LynxOS
+TDEPFILES= coff-solib.o sparc-tdep.o
+TM_FILE= tm-sparclynx.h
diff --git a/gdb/config/sparc/sun4os4.mh b/gdb/config/sparc/sun4os4.mh
new file mode 100644
index 0000000..4047c5c
--- /dev/null
+++ b/gdb/config/sparc/sun4os4.mh
@@ -0,0 +1,11 @@
+# Host: Sun 4 or Sparcstation, running SunOS 4
+XDEPFILES= ser-tcp.o
+XM_FILE= xm-sun4os4.h
+NAT_FILE= nm-sun4os4.h
+NATDEPFILES= fork-child.o infptrace.o inftarg.o corelow.o sparc-nat.o
+HOST_IPC=-DBSD_IPC
+GDBSERVER_DEPFILES= low-sparc.o
+# Setting XM_CLIBS=-lresolv would let us use the DNS, but that would screw
+# anyone who wants to use NIS, which includes at least one Cygnus customer
+# (PR 3593).  So leave it this way until/unless we find a resolver which can
+# get names from either DNS or NIS from the same GDB binary.
diff --git a/gdb/config/sparc/sun4os4.mt b/gdb/config/sparc/sun4os4.mt
new file mode 100644
index 0000000..5a4ecb9
--- /dev/null
+++ b/gdb/config/sparc/sun4os4.mt
@@ -0,0 +1,3 @@
+# Target: Sun 4 or Sparcstation, running SunOS 4
+TDEPFILES= sparc-tdep.o solib.o
+TM_FILE= tm-sun4os4.h
diff --git a/gdb/config/sparc/sun4sol2.mh b/gdb/config/sparc/sun4sol2.mh
new file mode 100644
index 0000000..468b362
--- /dev/null
+++ b/gdb/config/sparc/sun4sol2.mh
@@ -0,0 +1,18 @@
+# Host: Sun 4 or Sparcstation, running Solaris 2
+
+XM_FILE= xm-sun4sol2.h
+XDEPFILES= ser-tcp.o
+XM_CLIBS= -lsocket -lnsl
+
+NAT_FILE= nm-sun4sol2.h
+NATDEPFILES= corelow.o core-sol2.o solib.o procfs.o fork-child.o
+
+# If you are compiling with Sun's compiler, add the -xs option to CC
+# (e.g. `make CC="cc -xs"').
+# Sun's compilers require the -xs option to produce debug information
+# in the final linked executable.  Otherwise they leave it in the .o
+# files only, with undocumented pointers to it in the linked executable.
+# This is commented out because we don't assume that the Sun compiler
+# is in use.
+#MH_CFLAGS=-xs
+HOST_IPC=-DBSD_IPC
diff --git a/gdb/config/sparc/sun4sol2.mt b/gdb/config/sparc/sun4sol2.mt
new file mode 100644
index 0000000..af70e9f
--- /dev/null
+++ b/gdb/config/sparc/sun4sol2.mt
@@ -0,0 +1,3 @@
+# Target: Sun 4 or Sparcstation, running Solaris 2
+TDEPFILES= sparc-tdep.o
+TM_FILE= tm-sun4sol2.h
diff --git a/gdb/config/sparc/tm-linux.h b/gdb/config/sparc/tm-linux.h
new file mode 100644
index 0000000..2cc708a
--- /dev/null
+++ b/gdb/config/sparc/tm-linux.h
@@ -0,0 +1,29 @@
+/* Macro definitions for GDB for a Sparc running Linux.
+   Copyright 1989, 1992, 1994, 1995, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_SPARCLINUX_H
+#define TM_SPARCLINUX_H
+
+#include "sparc/tm-sparc.h"
+
+#define SIGCONTEXT_PC_OFFSET 12
+
+#include "tm-sysv4.h"
+
+#endif /* TM_SPARCLINUX_H */
diff --git a/gdb/config/sparc/tm-nbsd.h b/gdb/config/sparc/tm-nbsd.h
new file mode 100644
index 0000000..1a31084
--- /dev/null
+++ b/gdb/config/sparc/tm-nbsd.h
@@ -0,0 +1,27 @@
+/* Macro definitions for Sparc running under NetBSD.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_NBSD_H
+#define TM_NBSD_H
+
+#include "sparc/tm-sparc.h"
+
+#include "tm-nbsd.h"
+
+#endif /* TM_NBSD_H */
diff --git a/gdb/config/sparc/tm-sp64.h b/gdb/config/sparc/tm-sp64.h
new file mode 100644
index 0000000..40a9a62
--- /dev/null
+++ b/gdb/config/sparc/tm-sp64.h
@@ -0,0 +1,378 @@
+/* Target machine sub-parameters for SPARC64, for GDB, the GNU debugger.
+   This is included by other tm-*.h files to define SPARC64 cpu-related info.
+   Copyright 1994, 1995, 1996, 1998 Free Software Foundation, Inc.
+   This is (obviously) based on the SPARC Vn (n<9) port.
+   Contributed by Doug Evans (dje@cygnus.com).
+   Further modified by Bob Manson (manson@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define GDB_TARGET_IS_SPARC64
+
+#ifdef __STDC__
+struct value;
+#endif
+
+/* Eeeew. Ok, we have to assume (for now) that the processor really is
+   in sparc64 mode. While this is the same instruction sequence as
+   on the Sparc, the stack frames are offset by +2047 (and the arguments
+   are 8 bytes instead of 4). */
+/* Instructions are:
+   std  %f10, [ %fp + 0x7a7 ]
+   std  %f8, [ %fp + 0x79f ]
+   std  %f6, [ %fp + 0x797 ]
+   std  %f4, [ %fp + 0x78f ]
+   std  %f2, [ %fp + 0x787 ]
+   std  %f0, [ %fp + 0x77f ]
+   std  %g6, [ %fp + 0x777 ]
+   std  %g4, [ %fp + 0x76f ]
+   std  %g2, [ %fp + 0x767 ]
+   std  %g0, [ %fp + 0x75f ]
+   std  %fp, [ %fp + 0x757 ]
+   std  %i4, [ %fp + 0x74f ]
+   std  %i2, [ %fp + 0x747 ]
+   std  %i0, [ %fp + 0x73f ]
+   nop
+   nop
+   nop
+   nop
+   rd  %tbr, %o0
+   st  %o0, [ %fp + 0x72b ]
+   rd  %tpc, %o0
+   st  %o0, [ %fp + 0x727 ]
+   rd  %psr, %o0
+   st  %o0, [ %fp + 0x723 ]
+   rd  %y, %o0
+   st  %o0, [ %fp + 0x71f ]
+   ldx  [ %sp + 0x8a7 ], %o5
+   ldx  [ %sp + 0x89f ], %o4
+   ldx  [ %sp + 0x897 ], %o3
+   ldx  [ %sp + 0x88f ], %o2
+   ldx  [ %sp + 0x887 ], %o1
+   call  %g0
+   ldx  [ %sp + 0x87f ], %o0
+   nop
+   ta  1
+   nop
+   nop
+   */
+
+#define CALL_DUMMY {		 0x9de3bec0fd3fa7f7LL, 0xf93fa7eff53fa7e7LL,\
+				 0xf13fa7dfed3fa7d7LL, 0xe93fa7cfe53fa7c7LL,\
+				 0xe13fa7bfdd3fa7b7LL, 0xd93fa7afd53fa7a7LL,\
+				 0xd13fa79fcd3fa797LL, 0xc93fa78fc53fa787LL,\
+				 0xc13fa77fcc3fa777LL, 0xc83fa76fc43fa767LL,\
+				 0xc03fa75ffc3fa757LL, 0xf83fa74ff43fa747LL,\
+				 0xf03fa73f01000000LL, 0x0100000001000000LL,\
+				 0x0100000091580000LL, 0xd027a72b93500000LL,\
+				 0xd027a72791480000LL, 0xd027a72391400000LL,\
+				 0xd027a71fda5ba8a7LL, 0xd85ba89fd65ba897LL,\
+				 0xd45ba88fd25ba887LL, 0x9fc02000d05ba87fLL,\
+				 0x0100000091d02001LL, 0x0100000001000000LL }
+
+
+/* 128 is to reserve space to write the %i/%l registers that will be restored
+   when we resume. */
+#define CALL_DUMMY_STACK_ADJUST 128
+
+#define CALL_DUMMY_LENGTH 192
+
+#define CALL_DUMMY_START_OFFSET 148
+
+#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + (5 * 4))
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + (8 * 4))
+
+#include "sparc/tm-sparc.h"
+
+/* Stack must be aligned on 128-bit boundaries when synthesizing
+   function calls. */
+
+#undef  STACK_ALIGN
+#define STACK_ALIGN(ADDR) (((ADDR) + 15 ) & -16)
+
+/* Number of machine registers.  */
+
+#undef  NUM_REGS
+#define NUM_REGS 125
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+/* Some of these registers are only accessible from priviledged mode.
+   They are here for kernel debuggers, etc.  */
+/* FIXME: icc and xcc are currently considered separate registers.
+   This may have to change and consider them as just one (ccr).
+   Let's postpone this as long as we can.  It's nice to be able to set
+   them individually.  */
+/* FIXME: fcc0-3 are currently separate, even though they are also part of
+   fsr.  May have to remove them but let's postpone this as long as
+   possible.  It's nice to be able to set them individually.  */
+/* FIXME: Whether to include f33, f35, etc. here is not clear.
+   There are advantages and disadvantages.  */
+
+#undef  REGISTER_NAMES
+#define REGISTER_NAMES  \
+{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",	\
+  "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7",	\
+  "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7",	\
+  "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7",	\
+								\
+  "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",		\
+  "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",		\
+  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",	\
+  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",	\
+  "f32", "f34", "f36", "f38", "f40", "f42", "f44", "f46",	\
+  "f48", "f50", "f52", "f54", "f56", "f58", "f60", "f62",	\
+                                                                \
+  "pc", "npc", "ccr", "fsr", "fprs", "y", "asi",		\
+  "ver", "tick", "pil", "pstate",				\
+  "tstate", "tba", "tl", "tt", "tpc", "tnpc", "wstate",		\
+  "cwp", "cansave", "canrestore", "cleanwin", "otherwin",	\
+  "asr16", "asr17", "asr18", "asr19", "asr20", "asr21",		\
+  "asr22", "asr23", "asr24", "asr25", "asr26", "asr27",		\
+  "asr28", "asr29", "asr30", "asr31",				\
+  /* These are here at the end to simplify removing them if we have to.  */ \
+  "icc", "xcc", "fcc0", "fcc1", "fcc2", "fcc3"			\
+}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#if 0 /* defined in tm-sparc.h, replicated for doc purposes */
+#define	G0_REGNUM 0             /* %g0 */
+#define	G1_REGNUM 1		/* %g1 */
+#define O0_REGNUM 8		/* %o0 */
+#define	SP_REGNUM 14		/* Contains address of top of stack, \
+				   which is also the bottom of the frame.  */
+#define	RP_REGNUM 15		/* Contains return address value, *before* \
+				   any windows get switched.  */
+#define	O7_REGNUM 15		/* Last local reg not saved on stack frame */
+#define	L0_REGNUM 16		/* First local reg that's saved on stack frame
+				   rather than in machine registers */
+#define	I0_REGNUM 24		/* %i0 */
+#define	FP_REGNUM 30		/* Contains address of executing stack frame */
+#define	I7_REGNUM 31		/* Last local reg saved on stack frame */
+#define	FP0_REGNUM 32		/* Floating point register 0 */
+#endif
+
+#define FP_MAX_REGNUM 80	/* 1 + last fp reg number */
+
+/* #undef v8 misc. regs */
+
+#undef Y_REGNUM
+#undef PS_REGNUM
+#undef WIM_REGNUM
+#undef TBR_REGNUM
+#undef PC_REGNUM
+#undef NPC_REGNUM
+#undef FPS_REGNUM
+#undef CPS_REGNUM
+
+/* v9 misc. and priv. regs */
+
+#define C0_REGNUM FP_MAX_REGNUM			/* Start of control registers */
+#define PC_REGNUM (C0_REGNUM + 0)		/* Current PC */
+#define NPC_REGNUM (C0_REGNUM + 1)		/* Next PC */
+#define CCR_REGNUM (C0_REGNUM + 2)		/* Condition Code Register (%xcc,%icc) */
+#define FSR_REGNUM (C0_REGNUM + 3)		/* Floating Point State */
+#define FPRS_REGNUM (C0_REGNUM + 4)		/* Floating Point Registers State */
+#define	Y_REGNUM (C0_REGNUM + 5)		/* Temp register for multiplication, etc.  */
+#define ASI_REGNUM (C0_REGNUM + 6)		/* Alternate Space Identifier */
+#define VER_REGNUM (C0_REGNUM + 7)		/* Version register */
+#define TICK_REGNUM (C0_REGNUM + 8)		/* Tick register */
+#define PIL_REGNUM (C0_REGNUM + 9)		/* Processor Interrupt Level */
+#define PSTATE_REGNUM (C0_REGNUM + 10)		/* Processor State */
+#define TSTATE_REGNUM (C0_REGNUM + 11)		/* Trap State */
+#define TBA_REGNUM (C0_REGNUM + 12)		/* Trap Base Address */
+#define TL_REGNUM (C0_REGNUM + 13)		/* Trap Level */
+#define TT_REGNUM (C0_REGNUM + 14)		/* Trap Type */
+#define TPC_REGNUM (C0_REGNUM + 15)		/* Trap pc */
+#define TNPC_REGNUM (C0_REGNUM + 16)		/* Trap npc */
+#define WSTATE_REGNUM (C0_REGNUM + 17)		/* Window State */
+#define CWP_REGNUM (C0_REGNUM + 18)		/* Current Window Pointer */
+#define CANSAVE_REGNUM (C0_REGNUM + 19)		/* Savable Windows */
+#define CANRESTORE_REGNUM (C0_REGNUM + 20)	/* Restorable Windows */
+#define CLEANWIN_REGNUM (C0_REGNUM + 21)	/* Clean Windows */
+#define OTHERWIN_REGNUM (C0_REGNUM + 22)	/* Other Windows */
+#define ASR_REGNUM(n) (C0_REGNUM+(23-16)+(n))	/* Ancillary State Register
+						   (n = 16...31) */
+#define ICC_REGNUM (C0_REGNUM + 39)		/* 32 bit condition codes */
+#define XCC_REGNUM (C0_REGNUM + 40)		/* 64 bit condition codes */
+#define FCC0_REGNUM (C0_REGNUM + 41)		/* fp cc reg 0 */
+#define FCC1_REGNUM (C0_REGNUM + 42)		/* fp cc reg 1 */
+#define FCC2_REGNUM (C0_REGNUM + 43)		/* fp cc reg 2 */
+#define FCC3_REGNUM (C0_REGNUM + 44)		/* fp cc reg 3 */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.
+   Some of the registers aren't 64 bits, but it's a lot simpler just to assume
+   they all are (since most of them are).  */
+#undef  REGISTER_BYTES
+#define REGISTER_BYTES (32*8+32*8+45*8)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+#undef  REGISTER_BYTE
+#define REGISTER_BYTE(N) \
+  ((N) < 32 ? (N)*8				\
+   : (N) < 64 ? 32*8 + ((N)-32)*4		\
+   : (N) < C0_REGNUM ? 32*8 + 32*4 + ((N)-64)*8	\
+   : 64*8 + ((N)-C0_REGNUM)*8)
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#undef  REGISTER_SIZE
+#define REGISTER_SIZE 8
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#undef  REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) \
+  ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+
+#undef  REGISTER_VIRTUAL_SIZE
+#define REGISTER_VIRTUAL_SIZE(N) \
+  ((N) < 32 ? 8 : (N) < 64 ? 4 : 8)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+/* tm-sparc.h defines this as 8, but play it safe.  */
+
+#undef  MAX_REGISTER_RAW_SIZE
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+/* tm-sparc.h defines this as 8, but play it safe.  */
+
+#undef  MAX_REGISTER_VIRTUAL_SIZE
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#undef  REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+ ((N) < 32 ? builtin_type_long_long \
+  : (N) < 64 ? builtin_type_float \
+  : (N) < 80 ? builtin_type_double \
+  : builtin_type_long_long)
+
+/* We use to support both 32 bit and 64 bit pointers.
+   We can't anymore because TARGET_PTR_BIT must now be a constant.  */
+#undef  TARGET_PTR_BIT
+#define TARGET_PTR_BIT 64
+
+/* Longs are 64 bits. */
+#undef TARGET_LONG_BIT
+#define TARGET_LONG_BIT 64
+
+#undef TARGET_LONG_LONG_BIT
+#define TARGET_LONG_LONG_BIT 64
+
+/* Does the specified function use the "struct returning" convention
+   or the "value returning" convention?  The "value returning" convention
+   almost invariably returns the entire value in registers.  The
+   "struct returning" convention often returns the entire value in
+   memory, and passes a pointer (out of or into the function) saying
+   where the value (is or should go).
+
+   Since this sometimes depends on whether it was compiled with GCC,
+   this is also an argument.  This is used in call_function to build a
+   stack, and in value_being_returned to print return values. 
+
+   On Sparc64, we only pass pointers to structs if they're larger then
+   32 bytes. Otherwise they're stored in %o0-%o3 (floating-point
+   values go into %fp0-%fp3).  */
+
+
+#undef  USE_STRUCT_CONVENTION
+#define USE_STRUCT_CONVENTION(gcc_p, type) (TYPE_LENGTH (type) > 32)
+
+#undef REG_STRUCT_HAS_ADDR
+#define REG_STRUCT_HAS_ADDR(gcc_p,type) (TYPE_LENGTH (type) > 32)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+/* FIXME: V9 uses %o0 for this.  */
+
+#undef  STORE_STRUCT_RETURN
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { target_write_memory ((SP)+(16*8), (char *)&(ADDR), 8); }
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#undef  FRAME_ARGS_SKIP
+#define FRAME_ARGS_SKIP 136
+
+/* Offsets into jmp_buf.
+   FIXME: This was borrowed from the v8 stuff and will probably have to change
+   for v9.  */
+
+#define JB_ELEMENT_SIZE 8	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+extern CORE_ADDR sparc64_read_sp ();
+extern CORE_ADDR sparc64_read_fp ();
+extern void sparc64_write_sp PARAMS ((CORE_ADDR));
+extern void sparc64_write_fp PARAMS ((CORE_ADDR));
+
+#define TARGET_READ_SP() (sparc64_read_sp ())
+#define TARGET_READ_FP() (sparc64_read_fp ())
+#define TARGET_WRITE_SP(X) (sparc64_write_sp (X))
+#define TARGET_WRITE_FP(X) (sparc64_write_fp (X))
+
+#undef TM_PRINT_INSN_MACH
+#define TM_PRINT_INSN_MACH bfd_mach_sparc_v9a
+
+CORE_ADDR sp64_push_arguments PARAMS ((int, struct value **, CORE_ADDR, unsigned char, CORE_ADDR));
+#undef PUSH_ARGUMENTS
+#define PUSH_ARGUMENTS(A,B,C,D,E) (sp = sp64_push_arguments ((A), (B), (C), (D), (E)))
+
+#undef EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  sparc64_extract_return_value(TYPE, REGBUF, VALBUF, 0)
+extern void
+sparc64_extract_return_value PARAMS ((struct type *, char [], char *, int));
diff --git a/gdb/config/sparc/tm-sp64sim.h b/gdb/config/sparc/tm-sp64sim.h
new file mode 100644
index 0000000..4545f32
--- /dev/null
+++ b/gdb/config/sparc/tm-sp64sim.h
@@ -0,0 +1,50 @@
+/* Macro definitions for GDB with the SPARC64 Simulator.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* ??? This file is based on tm-spc-em.h.  Our contents are probably bogus
+   but it's a good start.  */
+
+#include "sparc/tm-sp64.h"
+#include "tm-sunos.h"
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 8	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
diff --git a/gdb/config/sparc/tm-sparc.h b/gdb/config/sparc/tm-sparc.h
new file mode 100644
index 0000000..ecbe9e2
--- /dev/null
+++ b/gdb/config/sparc/tm-sparc.h
@@ -0,0 +1,584 @@
+/* Target machine sub-parameters for SPARC, for GDB, the GNU debugger.
+   This is included by other tm-*.h files to define SPARC cpu-related info.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+   Contributed by Michael Tiemann (tiemann@mcc.com)
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__
+struct frame_info;
+struct type;
+struct value;
+#endif
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Floating point is IEEE compatible.  */
+#define IEEE_FLOAT
+
+/* If an argument is declared "register", Sun cc will keep it in a register,
+   never saving it onto the stack.  So we better not believe the "p" symbol
+   descriptor stab.  */
+
+#define USE_REGISTER_NOT_ARG
+
+/* When passing a structure to a function, Sun cc passes the address
+   not the structure itself.  It (under SunOS4) creates two symbols,
+   which we need to combine to a LOC_REGPARM.  Gcc version two (as of
+   1.92) behaves like sun cc.  REG_STRUCT_HAS_ADDR is smart enough to
+   distinguish between Sun cc, gcc version 1 and gcc version 2.  */
+
+#define REG_STRUCT_HAS_ADDR(gcc_p,type) (gcc_p != 1)
+
+/* Sun /bin/cc gets this right as of SunOS 4.1.x.  We need to define
+   BELIEVE_PCC_PROMOTION to get this right now that the code which
+   detects gcc2_compiled. is broken.  This loses for SunOS 4.0.x and
+   earlier.  */
+
+#define BELIEVE_PCC_PROMOTION 1
+
+/* For acc, there's no need to correct LBRAC entries by guessing how
+   they should work.  In fact, this is harmful because the LBRAC
+   entries now all appear at the end of the function, not intermixed
+   with the SLINE entries.  n_opt_found detects acc for Solaris binaries;
+   function_stab_type detects acc for SunOS4 binaries.
+
+   For binary from SunOS4 /bin/cc, need to correct LBRAC's.
+
+   For gcc, like acc, don't correct.  */
+
+#define	SUN_FIXED_LBRAC_BUG \
+  (n_opt_found \
+   || function_stab_type == N_STSYM \
+   || function_stab_type == N_GSYM \
+   || processing_gcc_compilation)
+
+/* Do variables in the debug stabs occur after the N_LBRAC or before it?
+   acc: after, gcc: before, SunOS4 /bin/cc: before.  */
+
+#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) \
+  (!(gcc_p) \
+   && (n_opt_found \
+       || function_stab_type == N_STSYM \
+       || function_stab_type == N_GSYM))
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  SKIP_PROLOGUE_FRAMELESS_P advances
+   the PC past some of the prologue, but stops as soon as it
+   knows that the function has a frame.  Its result is equal
+   to its input PC if the function is frameless, unequal otherwise.  */
+
+#define SKIP_PROLOGUE(pc) \
+  { pc = skip_prologue (pc, 0); }
+#define SKIP_PROLOGUE_FRAMELESS_P(pc) \
+  { pc = skip_prologue (pc, 1); }
+extern CORE_ADDR skip_prologue PARAMS ((CORE_ADDR, int));
+
+/* Immediately after a function call, return the saved pc.
+   Can't go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+/* On the Sun 4 under SunOS, the compile will leave a fake insn which
+   encodes the structure size being returned.  If we detect such
+   a fake insn, step past it.  */
+
+#define PC_ADJUST(pc) sparc_pc_adjust(pc)
+extern CORE_ADDR sparc_pc_adjust PARAMS ((CORE_ADDR));
+
+#define SAVED_PC_AFTER_CALL(frame) PC_ADJUST (read_register (RP_REGNUM))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Stack must be aligned on 64-bit boundaries when synthesizing
+   function calls. */
+
+#define STACK_ALIGN(ADDR) (((ADDR) + 7) & -8)
+
+/* Sequence of bytes for breakpoint instruction (ta 1). */
+
+#define BREAKPOINT {0x91, 0xd0, 0x20, 0x01}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS 72
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES  \
+{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",	\
+  "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7",	\
+  "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7",	\
+  "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7",	\
+								\
+  "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+  "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",	\
+  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",	\
+  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",	\
+                                                                \
+  "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr" }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define	G0_REGNUM 0             /* %g0 */
+#define	G1_REGNUM 1		/* %g1 */
+#define O0_REGNUM 8		/* %o0 */
+#define	SP_REGNUM 14		/* Contains address of top of stack, \
+				   which is also the bottom of the frame.  */
+#define	RP_REGNUM 15		/* Contains return address value, *before* \
+				   any windows get switched.  */
+#define	O7_REGNUM 15		/* Last local reg not saved on stack frame */
+#define	L0_REGNUM 16		/* First local reg that's saved on stack frame
+				   rather than in machine registers */
+#define	I0_REGNUM 24		/* %i0 */
+#define	FP_REGNUM 30		/* Contains address of executing stack frame */
+#define	I7_REGNUM 31		/* Last local reg saved on stack frame */
+#define	FP0_REGNUM 32		/* Floating point register 0 */
+#define	Y_REGNUM 64		/* Temp register for multiplication, etc.  */
+#define	PS_REGNUM 65		/* Contains processor status */
+#define PS_FLAG_CARRY 0x100000	/* Carry bit in PS */
+#define	WIM_REGNUM 66		/* Window Invalid Mask (not really supported) */
+#define	TBR_REGNUM 67		/* Trap Base Register (not really supported) */
+#define	PC_REGNUM 68		/* Contains program counter */
+#define	NPC_REGNUM 69           /* Contains next PC */
+#define	FPS_REGNUM 70		/* Floating point status register */
+#define	CPS_REGNUM 71		/* Coprocessor status register */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  On the sparc, `registers'
+   contains the ins and locals, even though they are saved on the
+   stack rather than with the other registers, and this causes hair
+   and confusion in places like pop_frame.  It might be
+   better to remove the ins and locals from `registers', make sure
+   that get_saved_register can get them from the stack (even in the
+   innermost frame), and make this the way to access them.  For the
+   frame pointer we would do that via TARGET_READ_FP.  On the other hand,
+   that is likely to be confusing or worse for flat frames.  */
+
+#define REGISTER_BYTES (32*4+32*4+8*4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+/* ?? */
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* We need to override GET_SAVED_REGISTER so that we can deal with the way
+   outs change into ins in different frames.  HAVE_REGISTER_WINDOWS can't
+   deal with this case and also handle flat frames at the same time.  */
+
+#define GET_SAVED_REGISTER 1
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+/* On the SPARC, all regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) (4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+
+/* On the SPARC, all regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) (4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ ((N) < 32 ? builtin_type_int : (N) < 64 ? builtin_type_float : \
+  builtin_type_int)
+
+/* Writing to %g0 is a noop (not an error or exception or anything like
+   that, however).  */
+
+#define CANNOT_STORE_REGISTER(regno) ((regno) == G0_REGNUM)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function_by_hand. 
+   The ultimate mystery is, tho, what is the value "16"?  */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { char val[4]; \
+    store_unsigned_integer (val, 4, (ADDR)); \
+    write_memory ((SP)+(16*4), val, 4); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  sparc_extract_return_value(TYPE, REGBUF, VALBUF)
+extern void
+sparc_extract_return_value PARAMS ((struct type *, char [], char *));
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  sparc_store_return_value(TYPE, VALBUF)
+extern void sparc_store_return_value PARAMS ((struct type *, char *));
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  (sparc_extract_struct_value_address (REGBUF))
+
+extern CORE_ADDR
+sparc_extract_struct_value_address PARAMS ((char [REGISTER_BYTES]));
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the Sun 4, the frame-chain's nominal address
+   is held in the frame pointer register.
+
+   On the Sun4, the frame (in %fp) is %sp for the previous frame.
+   From the previous frame's %sp, we can find the previous frame's
+   %fp: it is in the save area just above the previous frame's %sp.
+
+   If we are setting up an arbitrary frame, we'll need to know where
+   it ends.  Hence the following.  This part of the frame cache
+   structure should be checked before it is assumed that this frame's
+   bottom is in the stack pointer.
+
+   If there isn't a frame below this one, the bottom of this frame is
+   in the stack pointer.
+
+   If there is a frame below this one, and the frame pointers are
+   identical, it's a leaf frame and the bottoms are the same also.
+
+   Otherwise the bottom of this frame is the top of the next frame.
+
+   The bottom field is misnamed, since it might imply that memory from
+   bottom to frame contains this frame.  That need not be true if
+   stack frames are allocated in different segments (e.g. some on a
+   stack, some on a heap in the data segment).
+
+   GCC 2.6 and later can generate ``flat register window'' code that
+   makes frames by explicitly saving those registers that need to be
+   saved.  %i7 is used as the frame pointer, and the frame is laid out so
+   that flat and non-flat calls can be intermixed freely within a
+   program.  Unfortunately for GDB, this means it must detect and record
+   the flatness of frames.
+
+   Since the prologue in a flat frame also tells us where fp and pc
+   have been stashed (the frame is of variable size, so their location
+   is not fixed), it's convenient to record them in the frame info.  */
+
+#define EXTRA_FRAME_INFO  \
+  CORE_ADDR bottom;  \
+  int in_prologue; \
+  int flat;  \
+  /* Following fields only relevant for flat frames.  */ \
+  CORE_ADDR pc_addr;  \
+  CORE_ADDR fp_addr;  \
+  /* Add this to ->frame to get the value of the stack pointer at the */ \
+  /* time of the register saves.  */ \
+  int sp_offset;
+
+#define FRAME_INIT_SAVED_REGS(fp) /*no-op*/
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci) \
+  sparc_init_extra_frame_info (fromleaf, fci)
+extern void sparc_init_extra_frame_info PARAMS((int, struct frame_info *));
+
+#define	PRINT_EXTRA_FRAME_INFO(fi) \
+  { \
+    if ((fi) && (fi)->flat) \
+      printf_filtered (" flat, pc saved at 0x%x, fp saved at 0x%x\n", \
+                       (fi)->pc_addr, (fi)->fp_addr); \
+  }
+
+#define FRAME_CHAIN(thisframe) (sparc_frame_chain (thisframe))
+extern CORE_ADDR sparc_frame_chain PARAMS ((struct frame_info *));
+
+/* INIT_EXTRA_FRAME_INFO needs the PC to detect flat frames.  */
+
+#define	INIT_FRAME_PC(fromleaf, prev) /* nothing */
+#define INIT_FRAME_PC_FIRST(fromleaf, prev) \
+  (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \
+	      (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ());
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+/* The location of I0 w.r.t SP.  This is actually dependent on how the system's
+   window overflow/underflow routines are written.  Most vendors save the L regs
+   followed by the I regs (at the higher address).  Some vendors get it wrong.
+ */
+
+#define	FRAME_SAVED_L0	0
+#define	FRAME_SAVED_I0	(8 * REGISTER_RAW_SIZE (L0_REGNUM))
+
+/* Where is the PC for a specific frame */
+
+#define FRAME_SAVED_PC(FRAME) sparc_frame_saved_pc (FRAME)
+extern CORE_ADDR sparc_frame_saved_pc PARAMS ((struct frame_info *));
+
+/* If the argument is on the stack, it will be here.  */
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_STRUCT_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 68
+
+/* Things needed for making the inferior call functions.  */
+/*
+ * First of all, let me give my opinion of what the DUMMY_FRAME
+ * actually looks like.
+ *
+ *               |                                 |
+ *               |                                 |
+ *               + - - - - - - - - - - - - - - - - +<-- fp (level 0)
+ *               |                                 |
+ *               |                                 |
+ *               |                                 |
+ *               |                                 |
+ *               |  Frame of innermost program     |
+ *               |           function              |
+ *               |                                 |
+ *               |                                 |
+ *               |                                 |
+ *               |                                 |
+ *               |                                 |
+ *               |---------------------------------|<-- sp (level 0), fp (c)
+ *               |                                 |
+ *     DUMMY     |             fp0-31              |
+ *               |                                 |
+ *               |             ------              |<-- fp - 0x80
+ *     FRAME     |              g0-7               |<-- fp - 0xa0
+ *               |              i0-7               |<-- fp - 0xc0
+ *               |             other               |<-- fp - 0xe0
+ *               |               ?                 |
+ *               |               ?                 |
+ *               |---------------------------------|<-- sp' = fp - 0x140
+ *               |                                 |
+ * xcution start |                                 |
+ * sp' + 0x94 -->|        CALL_DUMMY (x code)      |
+ *               |                                 |
+ *               |                                 |
+ *               |---------------------------------|<-- sp'' = fp - 0x200
+ *               |  align sp to 8 byte boundary    |
+ *               |     ==> args to fn <==          |
+ *  Room for     |                                 |
+ * i & l's + agg | CALL_DUMMY_STACK_ADJUST = 0x0x44|
+ *               |---------------------------------|<-- final sp (variable)
+ *               |                                 |
+ *               |   Where function called will    |
+ *               |           build frame.          |
+ *               |                                 |
+ *               |                                 |
+ *
+ *   I understand everything in this picture except what the space
+ * between fp - 0xe0 and fp - 0x140 is used for.  Oh, and I don't
+ * understand why there's a large chunk of CALL_DUMMY that never gets
+ * executed (its function is superceeded by PUSH_DUMMY_FRAME; they
+ * are designed to do the same thing).
+ *
+ *   PUSH_DUMMY_FRAME saves the registers above sp' and pushes the
+ * register file stack down one.
+ *
+ *   call_function then writes CALL_DUMMY, pushes the args onto the
+ * stack, and adjusts the stack pointer.
+ *
+ *   run_stack_dummy then starts execution (in the middle of
+ * CALL_DUMMY, as directed by call_function).
+ */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME	sparc_push_dummy_frame ()
+#define POP_FRAME	sparc_pop_frame ()
+
+void sparc_push_dummy_frame PARAMS ((void)), sparc_pop_frame PARAMS ((void));
+
+#ifndef CALL_DUMMY
+/* This sequence of words is the instructions
+
+   0:   bc 10 00 01     mov  %g1, %fp
+   4:   9d e3 80 00     save  %sp, %g0, %sp
+   8:   bc 10 00 02     mov  %g2, %fp
+   c:   be 10 00 03     mov  %g3, %i7
+  10:   da 03 a0 58     ld  [ %sp + 0x58 ], %o5
+  14:   d8 03 a0 54     ld  [ %sp + 0x54 ], %o4
+  18:   d6 03 a0 50     ld  [ %sp + 0x50 ], %o3
+  1c:   d4 03 a0 4c     ld  [ %sp + 0x4c ], %o2
+  20:   d2 03 a0 48     ld  [ %sp + 0x48 ], %o1
+  24:   40 00 00 00     call  <fun>
+  28:   d0 03 a0 44     ld  [ %sp + 0x44 ], %o0
+  2c:   01 00 00 00     nop 
+  30:   91 d0 20 01     ta  1
+  34:   01 00 00 00     nop
+
+   NOTES:
+	* the first four instructions are necessary only on the simulator.
+	* this is a multiple of 8 (not only 4) bytes.
+	* the `call' insn is a relative, not an absolute call.
+	* the `nop' at the end is needed to keep the trap from
+	  clobbering things (if NPC pointed to garbage instead).
+*/
+
+#define CALL_DUMMY { 0xbc100001, 0x9de38000, 0xbc100002, 0xbe100003,	\
+		     0xda03a058, 0xd803a054, 0xd603a050, 0xd403a04c,	\
+		     0xd203a048, 0x40000000, 0xd003a044, 0x01000000,	\
+		     0x91d02001, 0x01000000 }
+
+
+/* Size of the call dummy in bytes. */
+
+#define CALL_DUMMY_LENGTH 0x38
+
+/* Offset within call dummy of first instruction to execute. */
+
+#define CALL_DUMMY_START_OFFSET 0
+
+/* Offset within CALL_DUMMY of the 'call' instruction. */
+
+#define CALL_DUMMY_CALL_OFFSET (CALL_DUMMY_START_OFFSET + 0x24)
+
+/* Offset within CALL_DUMMY of the 'ta 1' instruction. */
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 0x30)
+
+#define CALL_DUMMY_STACK_ADJUST 68
+
+#endif
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
+ sparc_fix_call_dummy (dummyname, pc, fun, type, gcc_p)
+void sparc_fix_call_dummy PARAMS ((char *dummy, CORE_ADDR pc, CORE_ADDR fun,
+				   struct type *value_type, int using_gcc));
+
+/* The Sparc returns long doubles on the stack.  */
+
+#define RETURN_VALUE_ON_STACK(TYPE) \
+  (TYPE_CODE(TYPE) == TYPE_CODE_FLT \
+   && TYPE_LENGTH(TYPE) > 8)
+
+/* Sparc has no reliable single step ptrace call */
+
+#define SOFTWARE_SINGLE_STEP_P 1
+extern void sparc_software_single_step PARAMS ((unsigned int, int));
+#define SOFTWARE_SINGLE_STEP(sig,bp_p) sparc_software_single_step (sig,bp_p)
+
+/* We need more arguments in a frame specification for the
+   "frame" or "info frame" command.  */
+
+#define SETUP_ARBITRARY_FRAME(argc, argv) setup_arbitrary_frame (argc, argv)
+extern struct frame_info *setup_arbitrary_frame PARAMS ((int, CORE_ADDR *));
+
+/* To print every pair of float registers as a double, we use this hook.
+   We also print the condition code registers in a readable format
+   (FIXME: can expand this to all control regs).  */
+
+#undef 	PRINT_REGISTER_HOOK
+#define	PRINT_REGISTER_HOOK(regno)	\
+  sparc_print_register_hook (regno)
+extern void sparc_print_register_hook PARAMS ((int regno));
+
+
+/* Optimization for storing registers to the inferior.  The hook
+   DO_DEFERRED_STORES
+   actually executes any deferred stores.  It is called any time
+   we are going to proceed the child, or read its registers.
+   The hook CLEAR_DEFERRED_STORES is called when we want to throw
+   away the inferior process, e.g. when it dies or we kill it.
+   FIXME, this does not handle remote debugging cleanly.  */
+
+extern int deferred_stores;
+#define	DO_DEFERRED_STORES	\
+  if (deferred_stores)		\
+    target_store_registers (-2);
+#define	CLEAR_DEFERRED_STORES	\
+  deferred_stores = 0;
+
+/* If the current gcc for for this target does not produce correct debugging
+   information for float parameters, both prototyped and unprototyped, then
+   define this macro.  This forces gdb to  always assume that floats are
+   passed as doubles and then converted in the callee. */
+
+#define COERCE_FLOAT_TO_DOUBLE 1
+
+/* Select the sparc disassembler */
+
+#define TM_PRINT_INSN_MACH bfd_mach_sparc
+
+/* Arguments smaller than an int must promoted to ints when synthesizing
+   function calls.  */
+
+#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
+    sp = sparc_push_arguments((nargs), (args), (sp), (struct_return), (struct_addr))
+extern CORE_ADDR
+sparc_push_arguments PARAMS ((int, struct value **, CORE_ADDR, int, CORE_ADDR));
diff --git a/gdb/config/sparc/tm-sparclet.h b/gdb/config/sparc/tm-sparclet.h
new file mode 100644
index 0000000..bc43083
--- /dev/null
+++ b/gdb/config/sparc/tm-sparclet.h
@@ -0,0 +1,132 @@
+/* Target machine definitions for GDB for an embedded SPARC.
+   Copyright 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sparc/tm-sparc.h"
+
+#define TARGET_SPARCLET 1
+
+/* Select the sparclet disassembler.  Slightly different instruction set from
+   the V8 sparc.  */
+
+#undef TM_PRINT_INSN_MACH
+#define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclet
+
+/* overrides of tm-sparc.h */
+
+#undef TARGET_BYTE_ORDER
+#define TARGET_BYTE_ORDER_SELECTABLE
+
+/* Sequence of bytes for breakpoint instruction (ta 1). */
+#undef BREAKPOINT
+#define BIG_BREAKPOINT {0x91, 0xd0, 0x20, 0x01}
+#define LITTLE_BREAKPOINT {0x01, 0x20, 0xd0, 0x91}
+
+#undef  NUM_REGS /* formerly "72" */
+/*                WIN  FP   CPU  CCP  ASR  AWR  APSR */
+#define NUM_REGS (32 + 32 + 8  + 8  + 8/*+ 32 + 1*/)
+
+#undef  REGISTER_BYTES /* formerly "(32*4 + 32*4 + 8*4)" */
+#define REGISTER_BYTES (32*4 + 32*4 + 8*4 + 8*4 + 8*4/* + 32*4 + 1*4*/)
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+/* Sparclet has no fp! */
+/* Compiler maps types for floats by number, so can't 
+   change the numbers here. */
+
+#undef REGISTER_NAMES
+#define REGISTER_NAMES  \
+{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",	\
+  "o0", "o1", "o2", "o3", "o4", "o5", "o6", "o7",	\
+  "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7",	\
+  "i0", "i1", "i2", "i3", "i4", "i5", "i6", "i7",	\
+							\
+  "", "", "", "", "", "", "", "", /* no FPU regs */	\
+  "", "", "", "", "", "", "", "", 			\
+  "", "", "", "", "", "", "", "", 			\
+  "", "", "", "", "", "", "", "", 			\
+				  /* no CPSR, FPSR */	\
+  "y", "psr", "wim", "tbr", "pc", "npc", "", "", 	\
+							\
+  "ccsr", "ccpr", "cccrcr", "ccor", "ccobr", "ccibr", "ccir", "", \
+								  \
+  /*       ASR15                 ASR19 (don't display them) */    \
+  "asr1",  "", "asr17", "asr18", "", "asr20", "asr21", "asr22",   \
+/*									  \
+  "awr0",  "awr1",  "awr2",  "awr3",  "awr4",  "awr5",  "awr6",  "awr7",  \
+  "awr8",  "awr9",  "awr10", "awr11", "awr12", "awr13", "awr14", "awr15", \
+  "awr16", "awr17", "awr18", "awr19", "awr20", "awr21", "awr22", "awr23", \
+  "awr24", "awr25", "awr26", "awr27", "awr28", "awr29", "awr30", "awr31", \
+  "apsr",								  \
+ */									  \
+}
+
+/* Remove FP dependant code which was defined in tm-sparc.h */
+#undef	FP0_REGNUM /* Floating point register 0 */
+#undef	FPS_REGNUM /* Floating point status register */
+#undef 	CPS_REGNUM /* Coprocessor status register */
+
+/* sparclet register numbers */
+#define CCSR_REGNUM 72
+
+#undef EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF)                       \
+  {                                                                    \
+    memcpy ((VALBUF),                                                  \
+	    (char *)(REGBUF) + REGISTER_RAW_SIZE (O0_REGNUM) * 8 +     \
+	    (TYPE_LENGTH(TYPE) >= REGISTER_RAW_SIZE (O0_REGNUM)        \
+	     ? 0 : REGISTER_RAW_SIZE (O0_REGNUM) - TYPE_LENGTH(TYPE)), \
+	    TYPE_LENGTH(TYPE));                                        \
+  }
+#undef STORE_RETURN_VALUE
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  {                                                                    \
+    /* Other values are returned in register %o0.  */                  \
+    write_register_bytes (REGISTER_BYTE (O0_REGNUM), (VALBUF),         \
+			  TYPE_LENGTH (TYPE));                         \
+  }
+
+#undef PRINT_REGISTER_HOOK
+#define PRINT_REGISTER_HOOK(regno)
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
diff --git a/gdb/config/sparc/tm-sparclite.h b/gdb/config/sparc/tm-sparclite.h
new file mode 100644
index 0000000..d841f89
--- /dev/null
+++ b/gdb/config/sparc/tm-sparclite.h
@@ -0,0 +1,98 @@
+/* Macro definitions for GDB for a Fujitsu SPARClite.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_SPARCLITE 1
+
+#include "sparc/tm-sparc.h"
+
+/* overrides of tm-sparc.h */
+
+#undef TARGET_BYTE_ORDER
+#define TARGET_BYTE_ORDER_SELECTABLE
+
+/* Select the sparclite disassembler.  Slightly different instruction set from
+   the V8 sparc.  */
+
+#undef TM_PRINT_INSN_MACH
+#define TM_PRINT_INSN_MACH bfd_mach_sparc_sparclite
+
+/* Amount PC must be decremented by after a hardware instruction breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_HW_BREAK 4
+
+#define FRAME_CHAIN_VALID(fp,fi) alternate_frame_chain_valid (fp, fi)
+
+#undef NUM_REGS 
+#define NUM_REGS 80 
+
+#undef REGISTER_BYTES
+#define REGISTER_BYTES (32*4+32*4+8*4+8*4)
+
+#undef REGISTER_NAMES
+#define REGISTER_NAMES  \
+{ "g0", "g1", "g2", "g3", "g4", "g5", "g6", "g7",       \
+  "o0", "o1", "o2", "o3", "o4", "o5", "sp", "o7",       \
+  "l0", "l1", "l2", "l3", "l4", "l5", "l6", "l7",       \
+  "i0", "i1", "i2", "i3", "i4", "i5", "fp", "i7",       \
+                                                                \
+  "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",       \
+  "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
+  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",       \
+  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",       \
+                                                                \
+  "y", "psr", "wim", "tbr", "pc", "npc", "fpsr", "cpsr",        \
+  "dia1", "dia2", "dda1", "dda2", "ddv1", "ddv2", "dcr", "dsr" }
+
+#define DIA1_REGNUM 72          /* debug instr address register 1 */
+#define DIA2_REGNUM 73          /* debug instr address register 2 */
+#define DDA1_REGNUM 74          /* debug data address register 1 */
+#define DDA2_REGNUM 75          /* debug data address register 2 */
+#define DDV1_REGNUM 76          /* debug data value register 1 */
+#define DDV2_REGNUM 77          /* debug data value register 2 */
+#define DCR_REGNUM 78           /* debug control register */
+#define DSR_REGNUM 79           /* debug status regsiter */
+
+#define TARGET_HW_BREAK_LIMIT 2
+#define TARGET_HW_WATCH_LIMIT 2
+
+/* Enable watchpoint macro's */
+
+#define TARGET_HAS_HARDWARE_WATCHPOINTS
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \
+	sparclite_check_watch_resources (type, cnt, ot)
+
+/* When a hardware watchpoint fires off the PC will be left at the
+   instruction which caused the watchpoint.  It will be necessary for
+   GDB to step over the watchpoint. ***
+
+#define STOPPED_BY_WATCHPOINT(W) \
+  ((W).kind == TARGET_WAITKIND_STOPPED \
+   && (W).value.sig == TARGET_SIGNAL_TRAP \
+   && ((int) read_register (IPSW_REGNUM) & 0x00100000))
+*/
+
+/* Use these macros for watchpoint insertion/deletion.  */
+#define target_insert_watchpoint(addr, len, type) sparclite_insert_watchpoint (addr, len, type)
+#define target_remove_watchpoint(addr, len, type) sparclite_remove_watchpoint (addr, len, type)
+#define target_insert_hw_breakpoint(addr, len) sparclite_insert_hw_breakpoint (addr, len)
+#define target_remove_hw_breakpoint(addr, len) sparclite_remove_hw_breakpoint (addr, len)
+#define target_stopped_data_address() sparclite_stopped_data_address()
diff --git a/gdb/config/sparc/tm-sparclynx.h b/gdb/config/sparc/tm-sparclynx.h
new file mode 100644
index 0000000..5a0d908
--- /dev/null
+++ b/gdb/config/sparc/tm-sparclynx.h
@@ -0,0 +1,36 @@
+/* Macro definitions for Sparc running under LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_SPARCLYNX_H
+#define TM_SPARCLYNX_H
+
+#include "tm-lynx.h"
+
+/* Use generic Sparc definitions. */
+#include "sparc/tm-sparc.h"
+
+/* Lynx does this backwards from everybody else */
+
+#undef FRAME_SAVED_I0
+#undef FRAME_SAVED_L0
+
+#define FRAME_SAVED_I0 0
+#define FRAME_SAVED_L0 (8 * REGISTER_RAW_SIZE (I0_REGNUM))
+
+#endif /* TM_SPARCLYNX_H */
diff --git a/gdb/config/sparc/tm-spc-em.h b/gdb/config/sparc/tm-spc-em.h
new file mode 100644
index 0000000..3a9b457
--- /dev/null
+++ b/gdb/config/sparc/tm-spc-em.h
@@ -0,0 +1,46 @@
+/* Target machine definitions for GDB for an embedded SPARC.
+   Copyright 1989, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sparc/tm-sparc.h"
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
diff --git a/gdb/config/sparc/tm-sun4os4.h b/gdb/config/sparc/tm-sun4os4.h
new file mode 100644
index 0000000..985e18c
--- /dev/null
+++ b/gdb/config/sparc/tm-sun4os4.h
@@ -0,0 +1,58 @@
+/* Macro definitions for GDB for a Sun 4 running sunos 4.
+   Copyright 1989, 1992, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sparc/tm-sparc.h"
+#include "tm-sunos.h"
+
+/* Redefine SKIP_TRAMPOLINE_CODE to handle PIC compiled modules
+   in main executables.  */
+
+#undef SKIP_TRAMPOLINE_CODE
+#define SKIP_TRAMPOLINE_CODE(pc)  sunos4_skip_trampoline_code (pc)
+extern CORE_ADDR sunos4_skip_trampoline_code PARAMS ((CORE_ADDR));
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+
+extern char *sunpro_static_transform_name PARAMS ((char *));
+#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x)
+#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '$')
diff --git a/gdb/config/sparc/tm-sun4sol2.h b/gdb/config/sparc/tm-sun4sol2.h
new file mode 100644
index 0000000..7bab6e6
--- /dev/null
+++ b/gdb/config/sparc/tm-sun4sol2.h
@@ -0,0 +1,94 @@
+/* Macro definitions for GDB for a Sun 4 running Solaris 2
+   Copyright 1989, 1992, 1993, 1994, 1995, 1997, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sparc/tm-sparc.h"
+#include "tm-sysv4.h"
+ 
+/* There are two different signal handler trampolines in Solaris2.  */
+#define IN_SIGTRAMP(pc, name) \
+  ((name) \
+   && (STREQ ("sigacthandler", name) || STREQ ("ucbsigvechandler", name)))
+ 
+/* The signal handler gets a pointer to an ucontext as third argument
+   if it is called from sigacthandler.  This is the offset to the saved
+   PC within it.  sparc_frame_saved_pc knows how to deal with
+   ucbsigvechandler.  */  
+#define SIGCONTEXT_PC_OFFSET 44
+
+#if 0	/* FIXME Setjmp/longjmp are not as well doc'd in SunOS 5.x yet */
+
+/* Offsets into jmp_buf.  Not defined by Sun, but at least documented in a
+   comment in <machine/setjmp.h>! */
+
+#define JB_ELEMENT_SIZE 4	/* Size of each element in jmp_buf */
+
+#define JB_ONSSTACK 0
+#define JB_SIGMASK 1
+#define JB_SP 2
+#define JB_PC 3
+#define JB_NPC 4
+#define JB_PSR 5
+#define JB_G1 6
+#define JB_O0 7
+#define JB_WBCNT 8
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+extern int
+get_longjmp_target PARAMS ((CORE_ADDR *));
+
+#define GET_LONGJMP_TARGET(ADDR) get_longjmp_target(ADDR)
+#endif  /* 0 */
+
+/* The SunPRO compiler puts out 0 instead of the address in N_SO symbols,
+   and for SunPRO 3.0, N_FUN symbols too.  */
+#define SOFUN_ADDRESS_MAYBE_MISSING
+
+extern char *sunpro_static_transform_name PARAMS ((char *));
+#define STATIC_TRANSFORM_NAME(x) sunpro_static_transform_name (x)
+#define IS_STATIC_TRANSFORM_NAME(name) ((name)[0] == '$')
+
+#define FAULTED_USE_SIGINFO
+
+/* Enable handling of shared libraries for a.out executables.  */
+#define HANDLE_SVR4_EXEC_EMULATORS
+
+/* Macros to extract process id and thread id from a composite pid/tid */
+#define PIDGET(pid) ((pid) & 0xffff)
+#define TIDGET(pid) (((pid) >> 16) & 0xffff)
+
+/* Macro to extract carry from given regset.  */
+#define PROCFS_GET_CARRY(regset) ((regset)[R_PSR] & PS_FLAG_CARRY)
+
+#ifdef HAVE_THREAD_DB_LIB
+
+extern char *solaris_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) solaris_pid_to_str (PID)
+
+#else
+
+extern char *procfs_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) procfs_pid_to_str (PID)
+
+#endif
diff --git a/gdb/config/sparc/tm-vxsparc.h b/gdb/config/sparc/tm-vxsparc.h
new file mode 100644
index 0000000..6612943
--- /dev/null
+++ b/gdb/config/sparc/tm-vxsparc.h
@@ -0,0 +1,36 @@
+/* Target machine description for VxWorks sparc's, for GDB, the GNU debugger.
+   Copyright 1993 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+#include "sparc/tm-spc-em.h"
+
+/* FIXME: These are almost certainly wrong. */
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (NUM_REGS)
+
+/* Number of registers in a ptrace_getfpregs call. */
+
+/* #define VX_SIZE_FPREGS (don't know how many) */
+
diff --git a/gdb/config/sparc/vxsparc.mt b/gdb/config/sparc/vxsparc.mt
new file mode 100644
index 0000000..9eadd17
--- /dev/null
+++ b/gdb/config/sparc/vxsparc.mt
@@ -0,0 +1,3 @@
+# Target: SPARC running VxWorks
+TDEPFILES= sparc-tdep.o remote-vx.o remote-vxsparc.o xdr_ld.o xdr_ptrace.o xdr_rdb.o
+TM_FILE= tm-vxsparc.h
diff --git a/gdb/config/sparc/xm-linux.h b/gdb/config/sparc/xm-linux.h
new file mode 100644
index 0000000..7d68b63
--- /dev/null
+++ b/gdb/config/sparc/xm-linux.h
@@ -0,0 +1,48 @@
+/* Macro definitions for running gdb on a Sparc running Linux.
+   Copyright (C) 1989, 1993, 1994, 1995, 1996, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef XM_SPARCLINUX_H
+#define XM_SPARCLINUX_H
+
+#include "sparc/xm-sparc.h"
+
+#define HAVE_TERMIOS
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+#define KERNEL_U_ADDR 0x0
+
+#define U_REGS_OFFSET 0
+
+#define NEED_POSIX_SETPGID
+
+/* Need R_OK etc, but USG isn't defined.  */
+#include <unistd.h>
+
+/* If you expect to use the mmalloc package to obtain mapped symbol files,
+   for now you have to specify some parameters that determine how gdb places
+   the mappings in it's address space.  See the comments in map_to_address()
+   for details.  This is expected to only be a short term solution.  Yes it
+   is a kludge.
+   FIXME:  Make this more automatic. */
+
+#define MMAP_BASE_ADDRESS      0xE0000000      /* First mapping here */
+#define MMAP_INCREMENT         0x01000000      /* Increment to next mapping */
+
+#endif /* _XM_SPARCLINUX_H */
diff --git a/gdb/config/sparc/xm-nbsd.h b/gdb/config/sparc/xm-nbsd.h
new file mode 100644
index 0000000..95fe846
--- /dev/null
+++ b/gdb/config/sparc/xm-nbsd.h
@@ -0,0 +1,21 @@
+/* Parameters for execution on a Sparc running NetBSD, for GDB.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Get generic NetBSD host definitions. */
+#include "xm-nbsd.h"
diff --git a/gdb/config/sparc/xm-sparc.h b/gdb/config/sparc/xm-sparc.h
new file mode 100644
index 0000000..06c247e
--- /dev/null
+++ b/gdb/config/sparc/xm-sparc.h
@@ -0,0 +1,22 @@
+/* Host definitions for a Sun 4, for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1996
+   Free Software Foundation, Inc.
+   Contributed by Michael Tiemann (tiemann@mcc.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
diff --git a/gdb/config/sparc/xm-sparclynx.h b/gdb/config/sparc/xm-sparclynx.h
new file mode 100644
index 0000000..7e62628
--- /dev/null
+++ b/gdb/config/sparc/xm-sparclynx.h
@@ -0,0 +1,24 @@
+/* Host-dependent definitions for Sparc running LynxOS, for GDB.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER BIG_ENDIAN
+
+/* Get generic LynxOS host definitions. */
+
+#include "xm-lynx.h"
diff --git a/gdb/config/sparc/xm-sun4os4.h b/gdb/config/sparc/xm-sun4os4.h
new file mode 100644
index 0000000..e50a213
--- /dev/null
+++ b/gdb/config/sparc/xm-sun4os4.h
@@ -0,0 +1,34 @@
+/* Macro definitions for running gdb on a Sun 4 running sunos 4.
+   Copyright (C) 1989, 1993, 1994, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sparc/xm-sparc.h"
+
+#define FPU
+
+/* /usr/include/malloc.h is included by vx-share/xdr_ld, and might
+   declare these using char * not void *.  The following should work with
+   acc, gcc, or /bin/cc.  */
+
+#define MALLOC_INCOMPATIBLE
+#include <malloc.h>
+
+/* SunOS 4.x uses nonstandard "char *" as type of third argument to ptrace() */
+
+#define PTRACE_ARG3_TYPE char*
diff --git a/gdb/config/sparc/xm-sun4sol2.h b/gdb/config/sparc/xm-sun4sol2.h
new file mode 100644
index 0000000..bc49ce4
--- /dev/null
+++ b/gdb/config/sparc/xm-sun4sol2.h
@@ -0,0 +1,49 @@
+/* Macro definitions for running gdb on a Sun 4 running Solaris 2.
+   Copyright 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Most of what we know is generic to SPARC hosts.  */
+
+#include "sparc/xm-sparc.h"
+
+/* Pick up more stuff from the generic SVR4 host include file. */
+
+#include "xm-sysv4.h"
+
+/* gdb wants to use the prgregset_t interface rather than
+   the gregset_t interface, partly because that's what's
+   used in core-sol2.c */
+
+#define GDB_GREGSET_TYPE prgregset_t
+#define GDB_FPREGSET_TYPE prfpregset_t
+
+/* These are not currently used in SVR4 (but should be, FIXME!).  */
+#undef	DO_DEFERRED_STORES
+#undef	CLEAR_DEFERRED_STORES
+
+/* May be needed, may be not?  From Pace Willisson's port.  FIXME.  */
+#define NEED_POSIX_SETPGID
+
+/* solaris doesn't have siginterrupt, though it has sigaction; however,
+   in this case siginterrupt would just be setting the default. */
+#define NO_SIGINTERRUPT
+
+/* On sol2.7, <curses.h> emits a bunch of 'macro redefined'
+   warnings, which makes autoconf think curses.h doesn't
+   exist.  Compensate fot that here. */
+#define HAVE_CURSES_H 1
diff --git a/gdb/config/tahoe/tahoe.mh b/gdb/config/tahoe/tahoe.mh
new file mode 100644
index 0000000..0814c01
--- /dev/null
+++ b/gdb/config/tahoe/tahoe.mh
@@ -0,0 +1,4 @@
+# Host: CCI or Harris Tahoe running BSD Unix
+
+XM_FILE= xm-tahoe.h
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
diff --git a/gdb/config/tahoe/tahoe.mt b/gdb/config/tahoe/tahoe.mt
new file mode 100644
index 0000000..b91a77e
--- /dev/null
+++ b/gdb/config/tahoe/tahoe.mt
@@ -0,0 +1,3 @@
+# Target: CCI or Harris Tahoe running BSD Unix
+TDEPFILES= tahoe-tdep.o
+TM_FILE= tm-tahoe.h
diff --git a/gdb/config/tahoe/tm-tahoe.h b/gdb/config/tahoe/tm-tahoe.h
new file mode 100644
index 0000000..a9df374
--- /dev/null
+++ b/gdb/config/tahoe/tm-tahoe.h
@@ -0,0 +1,289 @@
+/* Definitions to make GDB target for a tahoe running 4.3-Reno.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Ported by the State University of New York at Buffalo by the Distributed
+ * Computer Systems Lab, Department of Computer Science, 1991.
+ */
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+#define BITS_BIG_ENDIAN 0
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 2
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)	\
+{ register int op = (unsigned char) read_memory_integer (pc, 1);  \
+  if (op == 0x11) pc += 2;  /* skip brb */			  \
+  if (op == 0x13) pc += 3;  /* skip brw */			  \
+  if (op == 0x2c &&						  \
+      ((unsigned char) read_memory_integer (pc+2, 1)) == 0x5e)	  \
+    pc += 3;  /* skip subl2 */					  \
+  if (op == 0xe9 &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xae &&  \
+      ((unsigned char) read_memory_integer(pc+3, 1)) == 0x5e)	  \
+     pc += 4;  /* skip movab */					  \
+  if (op == 0xe9 &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xce &&  \
+      ((unsigned char) read_memory_integer(pc+4, 1)) == 0x5e)	  \
+    pc += 5;  /* skip movab */					  \
+  if (op == 0xe9 &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xee &&  \
+      ((unsigned char) read_memory_integer(pc+6, 1)) == 0x5e)	  \
+    pc += 7;  /* skip movab */					  \
+}
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame)
+
+/* Wrong for cross-debugging.  I don't know the real values.  */
+#include <machine/param.h>
+#define TARGET_UPAGES UPAGES
+#define TARGET_NBPG NBPG
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG))
+
+/* On BSD, sigtramp is in the u area.  Can't check the exact
+   addresses because for cross-debugging we don't have target include
+   files around.  This should be close enough.  */
+#define IN_SIGTRAMP(pc, name) ((pc) >= STACK_END_ADDR && (pc < 0xc0000000))
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0x30}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Return 1 if P points to an invalid floating point value.
+   LEN is the length in bytes -- not relevant on the Tahoe. */
+
+#define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000)
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS 19
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ps", "al", "ah"}
+
+#define FP_REGNUM 13		/* Contains address of executing stack frame */
+#define SP_REGNUM 14		/* Contains address of top of stack */
+#define PC_REGNUM 15		/* Contains program counter */
+#define PS_REGNUM 16		/* Contains processor status */
+
+#define AL_REGNUM 17		/* Contains accumulator */
+#define AH_REGNUM 18
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+
+#define REGISTER_BYTES (19*4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the tahoe, all regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the tahoe, all regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (1, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).
+
+   FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the Tahoe, the frame's nominal address is the FP value,
+   and it points to the old FP */
+
+#define FRAME_CHAIN(thisframe)  \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+/* Saved PC */
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame - 8, 4))
+
+/* In most of GDB, getting the args address is too important to
+   just say "I don't know". */
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+/* Address to use as an anchor for finding local variables */
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)  \
+{ numargs = ((0xffff & read_memory_integer(((fi)->frame-4),4)) - 4) >> 2; }
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ register int regnum;     \
+  register int rmask = read_memory_integer ((frame_info)->frame-4, 4) >> 16;\
+  register CORE_ADDR next_addr;     \
+  memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);     \
+  next_addr = (frame_info)->frame - 8;     \
+  for (regnum = 12; regnum >= 0; regnum--, rmask <<= 1)  \
+    (frame_saved_regs).regs[regnum] = (rmask & 0x1000) ? (next_addr -= 4) : 0;\
+  (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;  \
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame - 8;  \
+  (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame;      \
+}
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);	\
+  register int regnum;					\
+printf("PUSH_DUMMY_FRAME\n");				\
+  sp = push_word (sp, read_register (FP_REGNUM));	\
+  write_register (FP_REGNUM, sp);			\
+  sp = push_word (sp, 0x1fff0004);   /*SAVE MASK*/	\
+  sp = push_word (sp, read_register (PC_REGNUM));	\
+  for (regnum = 12; regnum >= 0; regnum--)		\
+    sp = push_word (sp, read_register (regnum));	\
+  write_register (SP_REGNUM, sp);			\
+}
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register CORE_ADDR fp = read_register (FP_REGNUM);			\
+  register int regnum;							\
+  register int regmask = read_memory_integer (fp-4, 4);			\
+printf("POP_FRAME\n");							\
+  regmask >>= 16;                                               	\
+  write_register (SP_REGNUM, fp+4);	                           	\
+  write_register (PC_REGNUM, read_memory_integer(fp-8, 4));	  	\
+  write_register (FP_REGNUM, read_memory_integer(fp, 4));  		\
+  fp -= 8;								\
+  for (regnum = 12; regnum >= 0; regnum--, regmask <<= 1)		\
+    if (regmask & 0x1000)                                            	\
+      write_register (regnum, read_memory_integer (fp-=4, 4));		\
+  flush_cached_frames ();						\
+}
+
+/* This sequence of words is the instructions
+     calls #69, @#32323232
+     bpt
+   Note this is 8 bytes.  */
+
+#define CALL_DUMMY {0xbf699f32, 0x32323230}
+
+/* Start execution at beginning of dummy */
+
+#define CALL_DUMMY_START_OFFSET 0
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, valtype, using_gcc) \
+{ int temp = (int) fun;				\
+  *((char *) dummyname + 1) = nargs;		\
+  memcpy((char *)dummyname+3,&temp,4); }
+
diff --git a/gdb/config/tahoe/xm-tahoe.h b/gdb/config/tahoe/xm-tahoe.h
new file mode 100644
index 0000000..99af344
--- /dev/null
+++ b/gdb/config/tahoe/xm-tahoe.h
@@ -0,0 +1,136 @@
+/* Definitions to make GDB hosted on a tahoe running 4.3-Reno
+   Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by the State University of New York at Buffalo, by the
+   Distributed Computer Systems Lab, Department of Computer Science, 1991.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Make sure the system include files define BIG_ENDIAN, UINT_MAX, const,
+   etc, rather than GDB's files.  */
+#include <stdio.h>
+#include <sys/param.h>
+
+/* Host is big-endian */
+
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0xc0000000 - (TARGET_UPAGES * TARGET_NBPG))
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{ addr = blockend - 100 + regno * 4;			\
+  if (regno == PC_REGNUM) addr = blockend - 8;		\
+  if (regno == PS_REGNUM) addr = blockend - 4;		\
+  if (regno == FP_REGNUM) addr = blockend - 40;	        \
+  if (regno == SP_REGNUM) addr = blockend - 36;         \
+  if (regno == AL_REGNUM) addr = blockend - 20;       \
+  if (regno == AH_REGNUM) addr = blockend - 24;}
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
+  0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
+  0, 0, 0, 0, 0, 0, 0, 0}
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movl $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+
+#define PUSH_FRAME_PTR        \
+  asm ("pushl fp");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("pushl 8(sp)");        \
+  asm ("pushl 8(sp)");        \
+  asm ("pushal 0x41(sp)");    \
+  asm ("pushl r0" );       \
+  asm ("pushl r1" );       \
+  asm ("pushl r2" );       \
+  asm ("pushl r3" );       \
+  asm ("pushl r4" );       \
+  asm ("pushl r5" );       \
+  asm ("pushl r6" );       \
+  asm ("pushl r7" );       \
+  asm ("pushl r8" );       \
+  asm ("pushl r9" );       \
+  asm ("pushl r10" );       \
+  asm ("pushl r11" );       \
+  asm ("pushl r12" );       \
+  asm ("pushl fp" );       \
+  asm ("pushl sp" );       \
+  asm ("pushl pc" );       \
+  asm ("pushl ps" );       \
+  asm ("pushl aclo" );       \
+  asm ("pushl achi" );       \
+}
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS      \
+{                          \
+  asm ("movl (sp)+, achi");   \
+  asm ("movl (sp)+, aclo");   \
+  asm ("movl (sp)+, ps");   \
+  asm ("movl (sp)+, pc");   \
+  asm ("movl (sp)+, sp");   \
+  asm ("movl (sp)+, fp");   \
+  asm ("movl (sp)+, r12");   \
+  asm ("movl (sp)+, r11");   \
+  asm ("movl (sp)+, r10");   \
+  asm ("movl (sp)+, r9");   \
+  asm ("movl (sp)+, r8");   \
+  asm ("movl (sp)+, r7");   \
+  asm ("movl (sp)+, r6");   \
+  asm ("movl (sp)+, r5");   \
+  asm ("movl (sp)+, r4");   \
+  asm ("movl (sp)+, r3");   \
+  asm ("movl (sp)+, r2");   \
+  asm ("movl (sp)+, r1");   \
+  asm ("movl (sp)+, r0");   \
+  asm ("subl2 $8,(sp)");   \
+  asm ("movl (sp),sp");    \
+  asm ("rei"); }
diff --git a/gdb/config/tm-lynx.h b/gdb/config/tm-lynx.h
new file mode 100644
index 0000000..7107241
--- /dev/null
+++ b/gdb/config/tm-lynx.h
@@ -0,0 +1,34 @@
+/* Macro definitions for LynxOS targets.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef TM_LYNX_H
+#define TM_LYNX_H
+
+/* Override number of expected traps from sysv. */
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+#include "coff-solib.h"		/* COFF shared library support */
+
+/* Lynx's signal.h doesn't seem to have any macros for what signal numbers
+   the real-time events are.  */
+#define REALTIME_LO 33
+/* One more than the last one.  */
+#define REALTIME_HI 64
+
+#endif /* TM_LYNX_H */
diff --git a/gdb/config/tm-nbsd.h b/gdb/config/tm-nbsd.h
new file mode 100644
index 0000000..e295d85
--- /dev/null
+++ b/gdb/config/tm-nbsd.h
@@ -0,0 +1,19 @@
+/* Target machine sub-description for NetBSD.
+   This is included by other tm-*.h files to specify NetBSD-specific stuff.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
diff --git a/gdb/config/tm-sunos.h b/gdb/config/tm-sunos.h
new file mode 100644
index 0000000..26ec3cf
--- /dev/null
+++ b/gdb/config/tm-sunos.h
@@ -0,0 +1,31 @@
+/* Target machine sub-description for SunOS version 4.
+   This is included by other tm-*.h files to specify SunOS-specific stuff.
+   Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "solib.h"	/* Support for shared libraries. */
+
+/* Return non-zero if we are in a shared library trampoline code stub. */
+
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) \
+  lookup_solib_trampoline_symbol_by_pc (pc)
+
+/* If PC is in a shared library trampoline code, return the PC
+   where the function itself actually starts.  If not, return 0.  */
+
+#define SKIP_TRAMPOLINE_CODE(pc)  find_solib_trampoline_target (pc)
diff --git a/gdb/config/tm-sysv4.h b/gdb/config/tm-sysv4.h
new file mode 100644
index 0000000..2c08541
--- /dev/null
+++ b/gdb/config/tm-sysv4.h
@@ -0,0 +1,45 @@
+/* Macro definitions for GDB on all SVR4 target systems.
+   Copyright 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* For SVR4 shared libraries, each call to a library routine goes through
+   a small piece of trampoline code in the ".plt" section.
+   The horribly ugly wait_for_inferior() routine uses this macro to detect
+   when we have stepped into one of these fragments.
+   We do not use lookup_solib_trampoline_symbol_by_pc, because
+   we cannot always find the shared library trampoline symbols
+   (e.g. on Irix5).  */
+
+#define IN_SOLIB_CALL_TRAMPOLINE(pc, name) in_plt_section((pc), (name))
+extern int in_plt_section PARAMS ((CORE_ADDR, char *));
+
+/* If PC is in a shared library trampoline code, return the PC
+   where the function itself actually starts.  If not, return 0.  */
+
+#define SKIP_TRAMPOLINE_CODE(pc)  find_solib_trampoline_target (pc)
+
+/* It is unknown which, if any, SVR4 assemblers do not accept dollar signs
+   in identifiers.  The default in G++ is to use dots instead, for all SVR4
+   systems, so we make that our default also.  FIXME: There should be some
+   way to get G++ to tell us what CPLUS_MARKER it is using, perhaps by
+   stashing it in the debugging information as part of the name of an
+   invented symbol ("gcc_cplus_marker$" for example). */
+
+#undef CPLUS_MARKER
+#define CPLUS_MARKER '.'
diff --git a/gdb/config/v850/tm-v850.h b/gdb/config/v850/tm-v850.h
new file mode 100644
index 0000000..14dd7f0
--- /dev/null
+++ b/gdb/config/v850/tm-v850.h
@@ -0,0 +1,174 @@
+/* Parameters for execution on an NEC V850 processor.
+   Copyright 1996
+   Free Software Foundation, Inc. 
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+#define NUM_REGS 66
+
+#define REGISTER_NAMES \
+{ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
+  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
+  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \
+    \
+  "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7", \
+  "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15", \
+  "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23", \
+  "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31", \
+    \
+  "pc", "fp" }
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+extern char **v850_register_names;
+#define REGISTER_NAME(i) v850_register_names[i]
+
+
+#define REGISTER_BYTES (NUM_REGS * 4)
+
+#define REGISTER_SIZE 4
+#define MAX_REGISTER_RAW_SIZE 4
+
+#define R0_REGNUM 0
+#define R1_REGNUM 1
+#define SAVE1_START_REGNUM 2
+#define SAVE1_END_REGNUM 2
+#define SP_REGNUM 3
+#define ARG0_REGNUM 6
+#define ARGLAST_REGNUM 9
+#define V0_REGNUM 10
+#define V1_REGNUM 11
+#define R12_REGNUM 12
+#define SAVE2_START_REGNUM 20
+#define SAVE2_END_REGNUM 29
+#define EP_REGNUM 30
+#define SAVE3_START_REGNUM 31
+#define SAVE3_END_REGNUM 31
+#define RP_REGNUM 31
+#define SR0_REGNUM 32
+#define PS_REGNUM (SR0_REGNUM+5)
+#define CTBP_REGNUM (SR0_REGNUM+20)
+#define PC_REGNUM 64
+#define FP_REGNUM 65
+#define FP_RAW_REGNUM 29
+
+#define TARGET_READ_FP() read_register (FP_RAW_REGNUM)
+#define TARGET_WRITE_FP(VAL) write_register (FP_REGNUM, (VAL))
+
+#define REGISTER_VIRTUAL_TYPE(REG) builtin_type_int
+
+#define REGISTER_BYTE(REG) ((REG) * 4)
+#define REGISTER_VIRTUAL_SIZE(REG) 4
+#define REGISTER_RAW_SIZE(REG) 4
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+#define BREAKPOINT {0x40, 0xF8} /* little-ended */
+
+#define FUNCTION_START_OFFSET 0
+
+#define DECR_PC_AFTER_BREAK 0
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+#define SAVED_PC_AFTER_CALL(fi) read_register (RP_REGNUM)
+
+#ifdef __STDC__
+struct frame_info;
+struct frame_saved_regs;
+struct type;
+struct value;
+#endif
+
+#define EXTRA_FRAME_INFO struct frame_saved_regs fsr;
+
+extern void v850_init_extra_frame_info PARAMS ((struct frame_info *fi));
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) v850_init_extra_frame_info (fi)
+#define INIT_FRAME_PC		/* Not necessary */
+
+extern void v850_frame_find_saved_regs PARAMS ((struct frame_info *fi, struct frame_saved_regs *regaddr));
+#define FRAME_FIND_SAVED_REGS(fi, regaddr) regaddr = fi->fsr
+
+extern CORE_ADDR v850_frame_chain PARAMS ((struct frame_info *fi));
+#define FRAME_CHAIN(fi) v850_frame_chain (fi)
+#define FRAME_CHAIN_VALID(FP, FI)	generic_frame_chain_valid (FP, FI)
+
+extern CORE_ADDR v850_find_callers_reg PARAMS ((struct frame_info *fi, int regnum));
+extern CORE_ADDR v850_frame_saved_pc   PARAMS ((struct frame_info *));
+#define FRAME_SAVED_PC(FI) (v850_frame_saved_pc (FI))
+
+#define EXTRACT_RETURN_VALUE(TYPE, REGBUF, VALBUF) \
+  memcpy (VALBUF, REGBUF + REGISTER_BYTE (V0_REGNUM), TYPE_LENGTH (TYPE))
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+  extract_address (REGBUF + REGISTER_BYTE (V0_REGNUM), \
+		   REGISTER_RAW_SIZE (V0_REGNUM))
+
+#define STORE_RETURN_VALUE(TYPE, VALBUF) \
+  write_register_bytes(REGISTER_BYTE (V0_REGNUM), VALBUF, TYPE_LENGTH (TYPE));
+
+extern CORE_ADDR v850_skip_prologue PARAMS ((CORE_ADDR pc));
+#define SKIP_PROLOGUE(pc) pc = v850_skip_prologue (pc)
+
+#define FRAME_ARGS_SKIP 0
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+#define FRAME_NUM_ARGS(val, fi) ((val) = -1)
+
+extern void v850_pop_frame PARAMS ((struct frame_info *frame));
+#define POP_FRAME v850_pop_frame (get_current_frame ())
+
+#define USE_GENERIC_DUMMY_FRAMES
+#define CALL_DUMMY                   {0}
+#define CALL_DUMMY_START_OFFSET      (0)
+#define CALL_DUMMY_BREAKPOINT_OFFSET (0)
+#define CALL_DUMMY_LOCATION          AT_ENTRY_POINT
+#define FIX_CALL_DUMMY(DUMMY, START, FUNADDR, NARGS, ARGS, TYPE, GCCP)
+#define CALL_DUMMY_ADDRESS()         entry_point_address ()
+extern CORE_ADDR v850_push_return_address PARAMS ((CORE_ADDR, CORE_ADDR));
+#define PUSH_RETURN_ADDRESS(PC, SP)  v850_push_return_address (PC, SP)
+
+
+#define PUSH_DUMMY_FRAME	generic_push_dummy_frame ()
+
+extern CORE_ADDR
+v850_push_arguments PARAMS ((int nargs, struct value **args, CORE_ADDR sp,
+			     unsigned char struct_return,
+			     CORE_ADDR struct_addr));
+#define PUSH_ARGUMENTS(NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR) \
+  (SP) = v850_push_arguments (NARGS, ARGS, SP, STRUCT_RETURN, STRUCT_ADDR)
+
+#define STORE_STRUCT_RETURN(STRUCT_ADDR, SP)
+
+
+#define PC_IN_CALL_DUMMY(PC, SP, FP) generic_pc_in_call_dummy (PC, SP)
+
+extern use_struct_convention_fn v850_use_struct_convention;
+#define USE_STRUCT_CONVENTION(GCC_P, TYPE) v850_use_struct_convention (GCC_P, TYPE);
+
+/* override the default get_saved_register function with
+   one that takes account of generic CALL_DUMMY frames */
+#define GET_SAVED_REGISTER
+
+/* Define this for Wingdb */
+
+#define TARGET_V850
diff --git a/gdb/config/v850/v850.mt b/gdb/config/v850/v850.mt
new file mode 100644
index 0000000..848bc8d
--- /dev/null
+++ b/gdb/config/v850/v850.mt
@@ -0,0 +1,5 @@
+# Target: NEC V850 processor
+TDEPFILES= v850-tdep.o
+TM_FILE= tm-v850.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/v850/libsim.a
diff --git a/gdb/config/vax/nm-vax.h b/gdb/config/vax/nm-vax.h
new file mode 100644
index 0000000..11f7dc9
--- /dev/null
+++ b/gdb/config/vax/nm-vax.h
@@ -0,0 +1,28 @@
+/* Common definitions for GDB native support on Vaxen under 4.2bsd and Ultrix.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define REGISTER_U_ADDR(addr, blockend, regno)		\
+{ addr = blockend - 0110 + regno * 4;			\
+  if (regno == PC_REGNUM) addr = blockend - 8;		\
+  if (regno == PS_REGNUM) addr = blockend - 4;		\
+  if (regno == FP_REGNUM) addr = blockend - 0120;	\
+  if (regno == AP_REGNUM) addr = blockend - 0124;	\
+  if (regno == SP_REGNUM) addr = blockend - 20; }
+
+
diff --git a/gdb/config/vax/tm-vax.h b/gdb/config/vax/tm-vax.h
new file mode 100644
index 0000000..ad10fb7
--- /dev/null
+++ b/gdb/config/vax/tm-vax.h
@@ -0,0 +1,330 @@
+/* Definitions to make GDB run on a vax under 4.2bsd.
+   Copyright 1986, 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 2
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)	\
+{ register int op = (unsigned char) read_memory_integer (pc, 1);  \
+  if (op == 0x11) pc += 2;  /* skip brb */			  \
+  if (op == 0x31) pc += 3;  /* skip brw */			  \
+  if (op == 0xC2 &&						  \
+      ((unsigned char) read_memory_integer (pc+2, 1)) == 0x5E)	  \
+    pc += 3;  /* skip subl2 */					  \
+  if (op == 0x9E &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xAE &&  \
+      ((unsigned char) read_memory_integer(pc+3, 1)) == 0x5E)	  \
+     pc += 4;  /* skip movab */					  \
+  if (op == 0x9E &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xCE &&  \
+      ((unsigned char) read_memory_integer(pc+4, 1)) == 0x5E)	  \
+    pc += 5;  /* skip movab */					  \
+  if (op == 0x9E &&						  \
+      ((unsigned char) read_memory_integer (pc+1, 1)) == 0xEE &&  \
+      ((unsigned char) read_memory_integer(pc+6, 1)) == 0x5E)	  \
+    pc += 7;  /* skip movab */					  \
+}
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) FRAME_SAVED_PC(frame)
+
+#define TARGET_UPAGES 14
+#define TARGET_NBPG 512
+#define STACK_END_ADDR (0x80000000 - (TARGET_UPAGES * TARGET_NBPG))
+
+/* On the VAX, sigtramp is in the u area.  Can't check the exact
+   addresses because for cross-debugging we don't have VAX include
+   files around.  This should be close enough.  */
+#define SIGTRAMP_START(pc)	STACK_END_ADDR
+#define SIGTRAMP_END(pc)	0x80000000
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {3}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Return 1 if P points to an invalid floating point value.
+   LEN is the length in bytes -- not relevant on the Vax.  */
+
+#define INVALID_FLOAT(p, len) ((*(short *) p & 0xff80) == 0x8000)
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+
+#define NUM_REGS 17
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "r11", "ap", "fp", "sp", "pc", "ps"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define AP_REGNUM 12
+#define FP_REGNUM 13		/* Contains address of executing stack frame */
+#define SP_REGNUM 14		/* Contains address of top of stack */
+#define PC_REGNUM 15		/* Contains program counter */
+#define PS_REGNUM 16		/* Contains processor status */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES (17*4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the vax, all regs are 4 bytes.  */
+
+#define REGISTER_RAW_SIZE(N) 4
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the vax, all regs are 4 bytes.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) 4
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (1, (ADDR)); }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, REGBUF, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer. */
+
+/* In the case of the Vax, the frame's nominal address is the FP value,
+   and 12 bytes later comes the saved previous FP value as a 4-byte word.  */
+
+#define FRAME_CHAIN(thisframe)  \
+  (!inside_entry_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame + 12, 4) :\
+   0)
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+/* On the vax, all functions have frames.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS)  {(FRAMELESS) = 0;}
+
+/* Saved Pc.  Get it from sigcontext if within sigtramp.  */
+
+/* Offset to saved PC in sigcontext, from <sys/signal.h>.  */
+#define SIGCONTEXT_PC_OFFSET 12
+
+#define FRAME_SAVED_PC(FRAME) \
+  (((FRAME)->signal_handler_caller \
+    ? sigtramp_saved_pc (FRAME) \
+    : read_memory_integer ((FRAME)->frame + 16, 4)) \
+   )
+
+/* Cannot find the AP register value directly from the FP value.  Must
+   find it saved in the frame called by this one, or in the AP
+   register for the innermost frame.  However, there is no way to tell
+   the difference between the innermost frame and a frame for which we
+   just don't know the frame that it called (e.g. "info frame
+   0x7ffec789").  For the sake of argument suppose that the stack is
+   somewhat trashed (which is one reason that "info frame" exists).
+   So return 0 (indicating we don't know the address of
+   the arglist) if we don't know what frame this frame calls.  */
+#define FRAME_ARGS_ADDRESS_CORRECT(fi) \
+ (((fi)->next                                  \
+   ? read_memory_integer ((fi)->next->frame + 8, 4)   \
+   : /* read_register (AP_REGNUM) */ 0))
+
+/* In most of GDB, getting the args address is too important to
+   just say "I don't know".  This is sometimes wrong for functions
+   that aren't on top of the stack, but c'est la vie.  */
+#define FRAME_ARGS_ADDRESS(fi) \
+ (((fi)->next                                  \
+   ? read_memory_integer ((fi)->next->frame + 8, 4)   \
+   : read_register (AP_REGNUM) /* 0 */))
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)  \
+{ numargs = (0xff & read_memory_integer (FRAME_ARGS_ADDRESS (fi), 1)); }
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 4
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ register int regnum;     \
+  register int regmask = read_memory_integer ((frame_info)->frame+4, 4) >> 16; \
+  register CORE_ADDR next_addr;     \
+  memset (&frame_saved_regs, '\0', sizeof frame_saved_regs);     \
+  next_addr = (frame_info)->frame + 16;     \
+  /* Regmask's low bit is for register 0,     \
+     which is the first one that would be pushed.  */     \
+  for (regnum = 0; regnum < 12; regnum++, regmask >>= 1)  \
+    (frame_saved_regs).regs[regnum] = (regmask & 1) ? (next_addr += 4) : 0;  \
+  (frame_saved_regs).regs[SP_REGNUM] = next_addr + 4;  \
+  if (read_memory_integer ((frame_info)->frame + 4, 4) & 0x20000000)   \
+    (frame_saved_regs).regs[SP_REGNUM] += 4 + 4 * read_memory_integer (next_addr + 4, 4);  \
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 16;  \
+  (frame_saved_regs).regs[FP_REGNUM] = (frame_info)->frame + 12;  \
+  (frame_saved_regs).regs[AP_REGNUM] = (frame_info)->frame + 8;  \
+  (frame_saved_regs).regs[PS_REGNUM] = (frame_info)->frame + 4;  \
+}
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);\
+  register int regnum;				    \
+  sp = push_word (sp, 0); /* arglist */		    \
+  for (regnum = 11; regnum >= 0; regnum--)	    \
+    sp = push_word (sp, read_register (regnum));    \
+  sp = push_word (sp, read_register (PC_REGNUM));   \
+  sp = push_word (sp, read_register (FP_REGNUM));   \
+  sp = push_word (sp, read_register (AP_REGNUM));   \
+  sp = push_word (sp, (read_register (PS_REGNUM) & 0xffef)   \
+		      + 0x2fff0000);		    \
+  sp = push_word (sp, 0); 			    \
+  write_register (SP_REGNUM, sp);		    \
+  write_register (FP_REGNUM, sp);		    \
+  write_register (AP_REGNUM, sp + 17 * sizeof (int)); }
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register CORE_ADDR fp = read_register (FP_REGNUM);		 \
+  register int regnum;						 \
+  register int regmask = read_memory_integer (fp + 4, 4);	 \
+  write_register (PS_REGNUM, 					 \
+		  (regmask & 0xffff)				 \
+		  | (read_register (PS_REGNUM) & 0xffff0000));	 \
+  write_register (PC_REGNUM, read_memory_integer (fp + 16, 4));  \
+  write_register (FP_REGNUM, read_memory_integer (fp + 12, 4));  \
+  write_register (AP_REGNUM, read_memory_integer (fp + 8, 4));   \
+  fp += 16;							 \
+  for (regnum = 0; regnum < 12; regnum++)			 \
+    if (regmask & (0x10000 << regnum))				 \
+      write_register (regnum, read_memory_integer (fp += 4, 4)); \
+  fp = fp + 4 + ((regmask >> 30) & 3);				 \
+  if (regmask & 0x20000000)					 \
+    { regnum = read_memory_integer (fp, 4);			 \
+      fp += (regnum + 1) * 4; }					 \
+  write_register (SP_REGNUM, fp);				 \
+  flush_cached_frames ();					 \
+}
+
+/* This sequence of words is the instructions
+     calls #69, @#32323232
+     bpt
+   Note this is 8 bytes.  */
+
+#define CALL_DUMMY {0x329f69fb, 0x03323232}
+
+#define CALL_DUMMY_START_OFFSET 0  /* Start execution at beginning of dummy */
+
+#define CALL_DUMMY_BREAKPOINT_OFFSET 7
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   \
+{ *((char *) dummyname + 1) = nargs;		\
+  *(int *)((char *) dummyname + 3) = fun; }
+
+/* If vax pcc says CHAR or SHORT, it provides the correct address.  */
+
+#define BELIEVE_PCC_PROMOTION 1
diff --git a/gdb/config/vax/vax.mt b/gdb/config/vax/vax.mt
new file mode 100644
index 0000000..ebdf942
--- /dev/null
+++ b/gdb/config/vax/vax.mt
@@ -0,0 +1,3 @@
+# Target: DEC VAX running BSD or Ultrix
+TDEPFILES= vax-tdep.o
+TM_FILE= tm-vax.h
diff --git a/gdb/config/vax/vaxbsd.mh b/gdb/config/vax/vaxbsd.mh
new file mode 100644
index 0000000..078687d
--- /dev/null
+++ b/gdb/config/vax/vaxbsd.mh
@@ -0,0 +1,13 @@
+# Host: DEC VAX running BSD
+
+# The following types of /bin/cc failures have been observed:
+# 1.  Something in readline.c which I have never seen
+# 2.  ``"values.c", line 816: compiler error: schain botch''
+#msg /bin/cc has been known to fail on VAXen running BSD4.3
+#msg If this occurs, use gcc
+#msg  (but see comments in Makefile.dist about compiling with gcc).
+
+XM_FILE= xm-vaxbsd.h
+XDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
+
+NAT_FILE= nm-vax.h
diff --git a/gdb/config/vax/vaxult.mh b/gdb/config/vax/vaxult.mh
new file mode 100644
index 0000000..4afcbc8
--- /dev/null
+++ b/gdb/config/vax/vaxult.mh
@@ -0,0 +1,7 @@
+# Host: DEC VAX running Ultrix
+
+XM_FILE= xm-vaxult.h
+XDEPFILES= 
+
+NAT_FILE= nm-vax.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
diff --git a/gdb/config/vax/vaxult2.mh b/gdb/config/vax/vaxult2.mh
new file mode 100644
index 0000000..dac73d6
--- /dev/null
+++ b/gdb/config/vax/vaxult2.mh
@@ -0,0 +1,7 @@
+# Host: DEC VAX running Ultrix
+
+XM_FILE= xm-vaxult2.h
+XDEPFILES= 
+
+NAT_FILE= nm-vax.h
+NATDEPFILES= infptrace.o inftarg.o fork-child.o corelow.o core-aout.o
diff --git a/gdb/config/vax/xm-vax.h b/gdb/config/vax/xm-vax.h
new file mode 100644
index 0000000..fea11c7
--- /dev/null
+++ b/gdb/config/vax/xm-vax.h
@@ -0,0 +1,81 @@
+/* Common definitions to make GDB run on Vaxen under 4.2bsd and Ultrix.
+   Copyright (C) 1986, 1987, 1989, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+
+#define KERNEL_U_ADDR (0x80000000 - (UPAGES * NBPG))
+
+/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
+#define	ONE_PROCESS_WRITETEXT
+
+/* Interface definitions for kernel debugger KDB.  */
+
+/* Map machine fault codes into signal numbers.
+   First subtract 0, divide by 4, then index in a table.
+   Faults for which the entry in this table is 0
+   are not handled by KDB; the program's own trap handler
+   gets to handle then.  */
+
+#define FAULT_CODE_ORIGIN 0
+#define FAULT_CODE_UNITS 4
+#define FAULT_TABLE    \
+{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
+  0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
+  0, 0, 0, 0, 0, 0, 0, 0}
+
+/* Start running with a stack stretching from BEG to END.
+   BEG and END should be symbols meaningful to the assembler.
+   This is used only for kdb.  */
+
+#define INIT_STACK(beg, end)  \
+{ asm (".globl end");         \
+  asm ("movl $ end, sp");      \
+  asm ("clrl fp"); }
+
+/* Push the frame pointer register on the stack.  */
+#define PUSH_FRAME_PTR        \
+  asm ("pushl fp");
+
+/* Copy the top-of-stack to the frame pointer register.  */
+#define POP_FRAME_PTR  \
+  asm ("movl (sp), fp");
+
+/* After KDB is entered by a fault, push all registers
+   that GDB thinks about (all NUM_REGS of them),
+   so that they appear in order of ascending GDB register number.
+   The fault code will be on the stack beyond the last register.  */
+
+#define PUSH_REGISTERS        \
+{ asm ("pushl 8(sp)");        \
+  asm ("pushl 8(sp)");        \
+  asm ("pushal 0x14(sp)");    \
+  asm ("pushr $037777"); }
+
+/* Assuming the registers (including processor status) have been
+   pushed on the stack in order of ascending GDB register number,
+   restore them and return to the address in the saved PC register.  */
+
+#define POP_REGISTERS      \
+{ asm ("popr $037777");    \
+  asm ("subl2 $8,(sp)");   \
+  asm ("movl (sp),sp");    \
+  asm ("rei"); }
diff --git a/gdb/config/vax/xm-vaxbsd.h b/gdb/config/vax/xm-vaxbsd.h
new file mode 100644
index 0000000..b42bd70
--- /dev/null
+++ b/gdb/config/vax/xm-vaxbsd.h
@@ -0,0 +1,10 @@
+/* Definitions to make GDB run on a vax under BSD, 4.3 or 4.4. */
+
+/* We have to include these files now, so that GDB will not make
+   competing definitions in defs.h.  */
+#include <machine/endian.h>
+/* This should exist on either 4.3 or 4.4.  4.3 doesn't have limits.h
+   or machine/limits.h.  */
+#include <sys/param.h>
+
+#include "vax/xm-vax.h"
diff --git a/gdb/config/vax/xm-vaxult.h b/gdb/config/vax/xm-vaxult.h
new file mode 100644
index 0000000..24c6437
--- /dev/null
+++ b/gdb/config/vax/xm-vaxult.h
@@ -0,0 +1,12 @@
+/* Definitions to make GDB run on a vax under Ultrix. */
+
+#include "vax/xm-vax.h"
+extern char *strdup();
+
+/* This is required for Ultrix 3.1b, not for later versions.  Ultrix
+   3.1b can't just use xm-vaxult2.h because Ultrix 3.1b does define
+   FD_SET.  Sure, we could have separate configurations for vaxult2,
+   vaxult3, and vaxult, but why bother?  Defining the ptrace constants
+   in infptrace.c isn't going to do any harm; it's not like they are
+   going to change.  */
+#define NO_PTRACE_H
diff --git a/gdb/config/vax/xm-vaxult2.h b/gdb/config/vax/xm-vaxult2.h
new file mode 100644
index 0000000..d0d3d62
--- /dev/null
+++ b/gdb/config/vax/xm-vaxult2.h
@@ -0,0 +1,11 @@
+/* Definitions to make GDB run on a vax under Ultrix. */
+
+#include "vax/xm-vax.h"
+extern char *strdup();
+
+#define NO_PTRACE_H
+
+/* Old versions of ultrix have fd_set but not the FD_* macros.  */
+
+#define FD_SET(bit,fdsetp) ((fdsetp)->fds_bits[(n) / 32] |= (1 << ((n) % 32)))
+#define FD_ZERO(fdsetp) memset (fdsetp, 0, sizeof (*fdsetp))
diff --git a/gdb/config/w65/tm-w65.h b/gdb/config/w65/tm-w65.h
new file mode 100644
index 0000000..2e354bb
--- /dev/null
+++ b/gdb/config/w65/tm-w65.h
@@ -0,0 +1,213 @@
+/* Parameters for execution on a WDC 65816 machine.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#define GDB_TARGET_IS_W65
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+extern CORE_ADDR w65_skip_prologue ();
+
+#define SKIP_PROLOGUE(ip) \
+    {(ip) = w65_skip_prologue(ip);}
+
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions. 
+
+   The return address is the value saved in the PR register + 4  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+  saved_pc_after_call(frame)
+
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Illegal instruction - used by the simulator for breakpoint
+   detection */
+
+#define BREAKPOINT {0xcb} /* WAI */
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+#define DECR_PC_AFTER_BREAK 0
+
+/* Return 1 if P points to an invalid floating point value.  */
+
+#define INVALID_FLOAT(p, len) 0   /* Just a first guess; not checked */
+
+/* Say how long registers are.  */
+/*#define REGISTER_TYPE  int*/
+
+/* Say how much memory is needed to store a copy of the register set */
+#define REGISTER_BYTES    (NUM_REGS*4) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N)     (((N) < 16) ? 2 : 4)
+
+#define REGISTER_VIRTUAL_SIZE(N)  REGISTER_RAW_SIZE(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  (REGISTER_VIRTUAL_SIZE(N) == 2 ? builtin_type_unsigned_short : builtin_type_unsigned_long)
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES \
+  {"r0","r1","r2", "r3", "r4", "r5", "r6", "r7",  \
+   "r8","r9","r10","r11","r12","r13","r14","r15", \
+   "pc","a", "x",  "y",  "dbr","d",  "s",  "p",   \
+   "ticks","cycles","insts"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define SP_REGNUM  22
+#define FP_REGNUM  15
+#define NUM_REGS   27
+#define PC_REGNUM  16
+#define P_REGNUM   23
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. 
+
+   We store structs through a pointer passed in R4 */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    { write_register (4, (ADDR));  }
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
+
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  
+
+   Things always get returned in R4/R5 */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (REGISTER_BYTE(4), VALBUF, TYPE_LENGTH (TYPE))
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_CHAIN(FRAME)       w65_frame_chain(FRAME)
+#define FRAME_SAVED_PC(FRAME)    (w65_frame_saved_pc(FRAME))
+#define FRAME_ARGS_ADDRESS(fi)   (fi)->frame
+#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   frame_find_saved_regs(frame_info, &(frame_saved_regs))
+
+#define NAMES_HAVE_UNDERSCORE
+
+typedef unsigned short INSN_WORD;
+
+extern CORE_ADDR w65_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) w65_addr_bits_remove (addr)
+
+#define CALL_DUMMY_LENGTH 10
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+#define POP_FRAME pop_frame();
+
+
+#define NOP   {0xea}
+
+#define REGISTER_SIZE 4
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+
+#define TARGET_INT_BIT  16
+#define TARGET_LONG_BIT 32
+#define TARGET_PTR_BIT  32
diff --git a/gdb/config/w65/w65.mt b/gdb/config/w65/w65.mt
new file mode 100644
index 0000000..06d2325
--- /dev/null
+++ b/gdb/config/w65/w65.mt
@@ -0,0 +1,8 @@
+# Target: WDC 65816 with simulator
+TDEPFILES= w65-tdep.o
+TM_FILE= tm-w65.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/w65/libsim.a
+
+
diff --git a/gdb/config/xm-aix4.h b/gdb/config/xm-aix4.h
new file mode 100644
index 0000000..87062f7
--- /dev/null
+++ b/gdb/config/xm-aix4.h
@@ -0,0 +1,99 @@
+/* Parameters for hosting on an PowerPC, for GDB, the GNU debugger.
+   Copyright 1995, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The following text is taken from config/rs6000.mh:
+ * # The IBM version of /usr/include/rpc/rpc.h has a bug -- it says
+ * # `extern fd_set svc_fdset;' without ever defining the type fd_set.
+ * # Unfortunately this occurs in the vx-share code, which is not configured
+ * # like the rest of GDB (e.g. it doesn't include "defs.h").
+ * # We circumvent this bug by #define-ing fd_set here, but undefining it in
+ * # the xm-rs6000.h file before ordinary modules try to use it.  FIXME, IBM!
+ * MH_CFLAGS='-Dfd_set=int'
+ * So, here we do the undefine...which has to occur before we include
+ * <sys/select.h> below.
+ */
+#undef fd_set
+
+#include <sys/select.h>
+
+/* Big end is at the low address */
+
+#define	HOST_BYTE_ORDER	BIG_ENDIAN
+
+/* At least as of AIX 3.2, we have termios.  */
+#define	HAVE_TERMIOS 1
+/* #define HAVE_TERMIO 1 */
+
+#define	USG 1
+#define	HAVE_SIGSETMASK	1
+
+#define FIVE_ARG_PTRACE
+
+/* AIX declares the mem functions differently than defs.h does.  AIX is
+   right, but defs.h works on more old systems.  For now, override it.  */
+
+#define MEM_FNS_DECLARED 1
+
+/* This system requires that we open a terminal with O_NOCTTY for it to
+   not become our controlling terminal.  */
+
+#define	USE_O_NOCTTY
+
+/* Brain death inherited from PC's pervades.  */
+#undef NULL
+#define NULL 0
+
+/* The IBM compiler requires this in order to properly compile alloca().  */
+#pragma alloca
+
+/* There is no vfork.  */
+
+#define	vfork	fork
+
+char *termdef();
+
+/* Signal handler for SIGWINCH `window size changed'. */
+
+#define	SIGWINCH_HANDLER  aix_resizewindow
+extern void aix_resizewindow PARAMS ((int));
+
+/* `lines_per_page' and `chars_per_line' are local to utils.c. Rectify this. */
+
+#define	SIGWINCH_HANDLER_BODY	\
+									\
+/* Respond to SIGWINCH `window size changed' signal, and reset GDB's	\
+   window settings appropriately. */					\
+									\
+void 						\
+aix_resizewindow (signo)			\
+     int signo;					\
+{						\
+  int fd = fileno (stdout);			\
+  if (isatty (fd)) {				\
+    int val;					\
+						\
+    val = atoi (termdef (fd, 'l'));		\
+    if (val > 0)				\
+      lines_per_page = val;			\
+    val = atoi (termdef (fd, 'c'));		\
+    if (val > 0)				\
+      chars_per_line = val;			\
+  }						\
+}
diff --git a/gdb/config/xm-lynx.h b/gdb/config/xm-lynx.h
new file mode 100644
index 0000000..d73e2c1
--- /dev/null
+++ b/gdb/config/xm-lynx.h
@@ -0,0 +1,20 @@
+/* Host-dependent definitions for any CPU running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <limits.h>	/* for INT_MIN */
diff --git a/gdb/config/xm-mpw.h b/gdb/config/xm-mpw.h
new file mode 100644
index 0000000..0c473d7
--- /dev/null
+++ b/gdb/config/xm-mpw.h
@@ -0,0 +1,81 @@
+/* Macro definitions for running GDB on Apple Macintoshes.
+   Copyright (C) 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "mpw.h"
+
+#include "fopen-bin.h"
+
+#include "spin.h"
+
+#define CANT_FORK
+
+/* Map these standard functions to versions that can do I/O in a console
+   window. */
+
+#define printf hacked_printf
+#define fprintf hacked_fprintf
+#define vprintf hacked_vfprintf
+#define fputs hacked_fputs
+#define fputc hacked_fputc
+#undef putc
+#define putc hacked_putc
+#define fflush hacked_fflush
+
+#define fgetc hacked_fgetc
+
+#define POSIX_UTIME
+
+/* No declaration of strdup in MPW's string.h, oddly enough. */
+
+char *strdup (char *s1);
+
+/* '.' indicates drivers on the Mac, so we need a different filename. */
+
+#define GDBINIT_FILENAME "_gdbinit"
+
+/* Commas are more common to separate dirnames in a path on Macs. */
+
+#define DIRNAME_SEPARATOR ','
+
+/* This is a real crufty hack. */
+
+#define HAVE_TERMIO
+
+/* Addons to the basic MPW-supported signal list. */
+
+#ifndef SIGQUIT
+#define SIGQUIT (1<<6)
+#endif
+#ifndef SIGHUP
+#define SIGHUP (1<<7)
+#endif
+
+/* If __STDC__ is on, then this definition will be missing. */
+
+#ifndef fileno
+#define fileno(p)	(p)->_file
+#endif
+
+#ifndef R_OK
+#define R_OK 4
+#endif
+
+extern int StandAlone;
+
+extern int mac_app;
diff --git a/gdb/config/xm-nbsd.h b/gdb/config/xm-nbsd.h
new file mode 100644
index 0000000..2332bb5
--- /dev/null
+++ b/gdb/config/xm-nbsd.h
@@ -0,0 +1,32 @@
+/* Host-dependent definitions for any CPU running NetBSD.
+   Copyright 1993, 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* We have to include these files now, so that GDB will not make
+   competing definitions in defs.h.  */
+#include <limits.h>
+
+#include <machine/endian.h>
+#if BYTE_ORDER == BIG_ENDIAN
+#define HOST_BYTE_ORDER BIG_ENDIAN
+#else
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+#endif
+
+/* NetBSD has termios facilities. */
+#define HAVE_TERMIOS
diff --git a/gdb/config/xm-sysv4.h b/gdb/config/xm-sysv4.h
new file mode 100644
index 0000000..06215e6
--- /dev/null
+++ b/gdb/config/xm-sysv4.h
@@ -0,0 +1,39 @@
+/* Definitions for running gdb on a host machine running any flavor of SVR4.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* SVR4 has termios facilities. */
+
+#undef HAVE_TERMIO
+#define HAVE_TERMIOS
+
+/* SVR4 is a derivative of System V Release 3 (USG) */
+
+#define USG
+
+/* Use setpgid(0,0) to run inferior in a separate process group */
+
+#define NEED_POSIX_SETPGID
+
+/* SVR4 has sigsetjmp and siglongjmp */
+#define HAVE_SIGSETJMP
+
+/* We have to include these files now, so that GDB will not make
+   competing definitions in defs.h.  */
+#include <limits.h>
diff --git a/gdb/config/z8k/tm-z8k.h b/gdb/config/z8k/tm-z8k.h
new file mode 100644
index 0000000..babde90
--- /dev/null
+++ b/gdb/config/z8k/tm-z8k.h
@@ -0,0 +1,287 @@
+/* Parameters for execution on a z8000 series machine.
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define IEEE_FLOAT 1
+
+#undef TARGET_INT_BIT
+#undef TARGET_LONG_BIT
+#undef TARGET_SHORT_BIT
+#undef TARGET_PTR_BIT
+
+#define TARGET_SHORT_BIT 16
+#define TARGET_INT_BIT 16
+#define TARGET_LONG_BIT 32
+#define TARGET_PTR_BIT (BIG ? 32: 16)
+
+/* Define the bit, byte, and word ordering of the machine.  */
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)   {(ip) = z8k_skip_prologue(ip);}
+extern CORE_ADDR mz8k_skip_prologue PARAMS ((CORE_ADDR ip));
+
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call(frame)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Sequence of bytes for breakpoint instruction. */
+
+#define BREAKPOINT {0x36,0x00}
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are.  */
+
+#define REGISTER_TYPE unsigned int
+
+#define NUM_REGS 	23   /* 16 registers + 1 ccr + 1 pc + 3 debug
+				regs + fake fp + fake sp*/
+#define REGISTER_BYTES  (NUM_REGS *4)
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the z8k, all but the pc are 2 bytes, but we
+   keep them all as 4 bytes and trim them on I/O */
+
+
+#define REGISTER_RAW_SIZE(N) (((N) < 16)? 2:4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  */
+
+#define REGISTER_VIRTUAL_SIZE(N) REGISTER_RAW_SIZE(N) 
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+ (REGISTER_VIRTUAL_SIZE(N) == 2? builtin_type_unsigned_int : builtin_type_long)
+
+/*#define INIT_FRAME_PC(x,y) init_frame_pc(x,y)*/
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES  \
+ {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
+  "ccr", "pc", "cycles","insts","time","fp","sp"}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define CCR_REGNUM 	16	/* Contains processor status */
+#define PC_REGNUM 	17	/* Contains program counter */
+#define CYCLES_REGNUM 	18
+#define INSTS_REGNUM 	19
+#define TIME_REGNUM 	20
+#define FP_REGNUM 	21	/* Contains fp, whatever memory model */
+#define SP_REGNUM 	22	/* Conatins sp, whatever memory model */
+
+
+
+#define PTR_SIZE (BIG ? 4: 2)
+#define PTR_MASK (BIG ? 0xff00ffff : 0x0000ffff)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) abort();
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  This is assuming that floating point values are returned
+   as doubles in d0/d1.  */
+
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy(VALBUF, REGBUF + REGISTER_BYTE(2), TYPE_LENGTH(TYPE));
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format. */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) abort();
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address and produces the frame's
+   chain-pointer.
+   In the case of the Z8000, the frame's nominal address
+   is the address of a ptr sized byte word containing the calling
+   frame's address.  */
+
+#define FRAME_CHAIN(thisframe) frame_chain(thisframe);
+
+
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+#if !defined (FRAME_NUM_ARGS)
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+#endif
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+#ifdef __STDC__
+struct frame_info;
+#endif
+extern void z8k_frame_init_saved_regs PARAMS ((struct frame_info *));
+#define FRAME_INIT_SAVED_REGS(fi) z8k_frame_init_saved_regs (fi)
+
+
+/* Things needed for making the inferior call functions.
+   It seems like every m68k based machine has almost identical definitions
+   in the individual machine's configuration files.  Most other cpu types
+   (mips, i386, etc) have routines in their *-tdep.c files to handle this
+   for most configurations.  The m68k family should be able to do this as
+   well.  These macros can still be overridden when necessary.  */
+
+/* The CALL_DUMMY macro is the sequence of instructions, as disassembled
+   by gdb itself:
+
+	fmovemx fp0-fp7,sp@-			0xf227 0xe0ff
+	moveml d0-a5,sp@-			0x48e7 0xfffc
+	clrw sp@-				0x4267
+	movew ccr,sp@-				0x42e7
+
+	/..* The arguments are pushed at this point by GDB;
+	no code is needed in the dummy for this.
+	The CALL_DUMMY_START_OFFSET gives the position of 
+	the following jsr instruction.  *../
+
+	jsr @#0x32323232			0x4eb9 0x3232 0x3232
+	addal #0x69696969,sp			0xdffc 0x6969 0x6969
+	trap #<your BPT_VECTOR number here>	0x4e4?
+	nop					0x4e71
+
+   Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
+   We actually start executing at the jsr, since the pushing of the
+   registers is done by PUSH_DUMMY_FRAME.  If this were real code,
+   the arguments for the function called by the jsr would be pushed
+   between the moveml and the jsr, and we could allow it to execute through.
+   But the arguments have to be pushed by GDB after the PUSH_DUMMY_FRAME is
+   done, and we cannot allow the moveml to push the registers again lest
+   they be taken for the arguments.  */
+
+
+#define CALL_DUMMY { 0 }
+#define CALL_DUMMY_LENGTH 24		/* Size of CALL_DUMMY */
+#define CALL_DUMMY_START_OFFSET 8	/* Offset to jsr instruction*/
+
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.
+   We use the BFD routines to store a big-endian value of known size.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)     \
+{ bfd_putb32 (fun,     (char *) dummyname + CALL_DUMMY_START_OFFSET + 2);  \
+  bfd_putb32 (nargs*4, (char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME	{ z8k_push_dummy_frame (); }
+
+extern void z8k_push_dummy_frame PARAMS ((void));
+
+extern void z8k_pop_frame PARAMS ((void));
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME		{ z8k_pop_frame (); }
+
+/* Offset from SP to first arg on stack at first instruction of a function */
+
+#define SP_ARG0 (1 * 4)
+
+extern CORE_ADDR z8k_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) z8k_addr_bits_remove (addr)
+int sim_z8001_mode;
+#define BIG (sim_z8001_mode)
+
+#define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)
+
+#define NO_STD_REGS
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+
+
+#define INIT_EXTRA_SYMTAB_INFO \
+  z8k_set_pointer_size(objfile->obfd->arch_info->bits_per_address);
+
+#define REGISTER_SIZE 4
+
diff --git a/gdb/config/z8k/z8k.mt b/gdb/config/z8k/z8k.mt
new file mode 100644
index 0000000..cb8d043
--- /dev/null
+++ b/gdb/config/z8k/z8k.mt
@@ -0,0 +1,7 @@
+# Target: Z8000 with simulator
+TDEPFILES= z8k-tdep.o
+TM_FILE= tm-z8k.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/z8k/libsim.a
+
diff --git a/gdb/configure b/gdb/configure
new file mode 100755
index 0000000..f70d046
--- /dev/null
+++ b/gdb/configure
@@ -0,0 +1,6279 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --disable-nls           do not use Native Language Support"
+ac_help="$ac_help
+  --with-included-gettext use the GNU gettext library included here"
+ac_help="$ac_help
+  --enable-tui            Enable full-screen terminal user interface"
+ac_help="$ac_help
+  --enable-netrom         Enable NetROM support"
+ac_help="$ac_help
+  --enable-build-warnings Enable build-time compiler warnings if gcc is used"
+ac_help="$ac_help
+  --with-mmalloc          Use memory mapped malloc package"
+ac_help="$ac_help
+  --with-x                use the X Window System"
+ac_help="$ac_help
+  --enable-shared         Use shared libraries"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=main.c
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:546: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:576: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_prog_rejected=no
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  if test -z "$CC"; then
+    case "`uname -s`" in
+    *win32* | *WIN32*)
+      # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:627: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="cl"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ ;;
+    esac
+  fi
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:659: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext << EOF
+
+#line 670 "configure"
+#include "confdefs.h"
+
+main(){return(0);}
+EOF
+if { (eval echo configure:675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:701: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:706: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:734: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:766: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 781 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:787: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 798 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:804: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -nologo -E"
+  cat > conftest.$ac_ext <<EOF
+#line 815 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking for AIX""... $ac_c" 1>&6
+echo "configure:846: checking for AIX" >&5
+cat > conftest.$ac_ext <<EOF
+#line 848 "configure"
+#include "confdefs.h"
+#ifdef _AIX
+  yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "yes" >/dev/null 2>&1; then
+  rm -rf conftest*
+  echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF
+#define _ALL_SOURCE 1
+EOF
+
+else
+  rm -rf conftest*
+  echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:870: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+  echo "$ac_t""yes" 1>&6
+  ISC=yes # If later tests want to check for ISC.
+  cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+  if test "$GCC" = yes; then
+    CC="$CC -posix"
+  else
+    CC="$CC -Xp"
+  fi
+else
+  echo "$ac_t""no" 1>&6
+  ISC=
+fi
+
+
+
+
+echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
+echo "configure:894: checking for ${CC-cc} option to accept ANSI C" >&5
+if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  am_cv_prog_cc_stdc=no
+ac_save_CC="$CC"
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX			-qlanglvl=ansi
+# Ultrix and OSF/1	-std1
+# HP-UX			-Aa -D_HPUX_SOURCE
+# SVR4			-Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  cat > conftest.$ac_ext <<EOF
+#line 910 "configure"
+#include "confdefs.h"
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+
+int main() {
+
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+
+; return 0; }
+EOF
+if { (eval echo configure:947: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_prog_cc_stdc="$ac_arg"; break
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+CC="$ac_save_CC"
+
+fi
+
+if test -z "$am_cv_prog_cc_stdc"; then
+  echo "$ac_t""none needed" 1>&6
+else
+  echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
+fi
+case "x$am_cv_prog_cc_stdc" in
+  x|xno) ;;
+  *) CC="$CC $am_cv_prog_cc_stdc" ;;
+esac
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/.. $srcdir/`cd $srcdir;pwd`/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:1018: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:1039: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1057: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+ALL_LINGUAS=
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:1082: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1111: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1139: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1144 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1152: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  ac_cv_header_stdc=yes
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1169 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "memchr" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1187 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "free" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+  :
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1208 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:1219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  :
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+  cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:1243: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1248 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this.  */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this.  */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this.  */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+   It does not let you subtract one const X* pointer from another in an arm
+   of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this.  */
+  char *t;
+  char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+  *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+  int x[] = {25, 17};
+  const int *foo = &x[0];
+  ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+  typedef const int *iptr;
+  iptr p = 0;
+  ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+  struct s { int j; const int *ap[3]; };
+  struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+  const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1297: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_const=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+  cat >> confdefs.h <<\EOF
+#define const 
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1318: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat > conftest.$ac_ext <<EOF
+#line 1325 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1332: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_inline=$ac_kw; break
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+  inline | yes) ;;
+  no) cat >> confdefs.h <<\EOF
+#define inline 
+EOF
+ ;;
+  *)  cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:1358: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1363 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_off_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:1391: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1396 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_size_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:1426: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1431 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:1438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_header_alloca_h=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:1459: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1464 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:1492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_alloca_works=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+  # that cause trouble.  Some versions do not even contain alloca or
+  # contain a buggy version.  If you still want to use their alloca,
+  # use ar to extract alloca.o from them instead of compiling alloca.c.
+  ALLOCA=alloca.${ac_objext}
+  cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:1524: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1529 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "webecray" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_os_cray=yes
+else
+  rm -rf conftest*
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1554: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1559 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1582: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+  break
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:1609: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_c_stack_direction=0
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1617 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+  static char *addr = 0;
+  auto char dummy;
+  if (addr == 0)
+    {
+      addr = &dummy;
+      return find_stack_direction ();
+    }
+  else
+    return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+  exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:1636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_stack_direction=1
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1661: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1666 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1671: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1700: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1705 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:1753: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1761 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the filesystem buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propogated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h.  */
+# ifndef HAVE_SYS_PARAM_H
+#  define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+	char *data, *data2, *data3;
+	int i, pagesize;
+	int fd;
+
+	pagesize = getpagesize();
+
+	/*
+	 * First, make a file with some known garbage in it.
+	 */
+	data = malloc(pagesize);
+	if (!data)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		*(data + i) = rand();
+	umask(0);
+	fd = creat("conftestmmap", 0600);
+	if (fd < 0)
+		exit(1);
+	if (write(fd, data, pagesize) != pagesize)
+		exit(1);
+	close(fd);
+
+	/*
+	 * Next, try to mmap the file at a fixed address which
+	 * already has something else allocated at it.  If we can,
+	 * also make sure that we see the same garbage.
+	 */
+	fd = open("conftestmmap", O_RDWR);
+	if (fd < 0)
+		exit(1);
+	data2 = malloc(2 * pagesize);
+	if (!data2)
+		exit(1);
+	data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+	if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+	    MAP_PRIVATE | MAP_FIXED, fd, 0L))
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data2 + i))
+			exit(1);
+
+	/*
+	 * Finally, make sure that changes to the mapped area
+	 * do not percolate back to the file as seen by read().
+	 * (This is a bug on some variants of i386 svr4.0.)
+	 */
+	for (i = 0; i < pagesize; ++i)
+		*(data2 + i) = *(data2 + i) + 1;
+	data3 = malloc(pagesize);
+	if (!data3)
+		exit(1);
+	if (read(fd, data3, pagesize) != pagesize)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data3 + i))
+			exit(1);
+	close(fd);
+	unlink("conftestmmap");
+	exit(0);
+}
+
+EOF
+if { (eval echo configure:1901: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+                              
+   for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1929: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1934 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1969: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1974 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2026: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2031 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+   fi
+
+   if test $ac_cv_header_locale_h = yes; then
+    echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:2088: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2093 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+    fi
+  fi
+   echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:2121: checking whether NLS is requested" >&5
+        # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+  enableval="$enable_nls"
+  USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+    echo "$ac_t""$USE_NLS" 1>&6
+    
+
+    USE_INCLUDED_LIBINTL=no
+
+        if test "$USE_NLS" = "yes"; then
+      cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+      echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:2141: checking whether included gettext is requested" >&5
+      # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+  withval="$with_included_gettext"
+  nls_cv_force_use_gnu_gettext=$withval
+else
+  nls_cv_force_use_gnu_gettext=no
+fi
+
+      echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+                        		nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:2160: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2165 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:2187: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2192 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:2215: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lintl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2223 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:2250: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2255 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+	      # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2290: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+	      if test "$MSGFMT" != "no"; then
+		for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2324: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2329 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+		# Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2379: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2415: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		cat > conftest.$ac_ext <<EOF
+#line 2447 "configure"
+#include "confdefs.h"
+
+int main() {
+extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr
+; return 0; }
+EOF
+if { (eval echo configure:2455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  CATOBJEXT=.gmo
+		   DATADIRNAME=share
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CATOBJEXT=.mo
+		   DATADIRNAME=lib
+fi
+rm -f conftest*
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+	        
+        if test "$CATOBJEXT" = "NONE"; then
+	  	  	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+                INTLOBJS="\$(GETTOBJS)"
+        # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2487: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2521: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do 
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2557: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/../intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=libintl.h
+        nls_cv_header_libgt=libgettext.h
+      fi
+
+            if test "$XGETTEXT" != ":"; then
+			if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=libintl.h
+      nls_cv_header_libgt=libgettext.h
+    fi
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+                for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+        
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+  
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:2647: checking for catalogs to be installed" >&5
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       echo "$ac_t""$LINGUAS" 1>&6
+     fi
+
+          if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+            if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   
+
+            if test -f $srcdir/po2tbl.sed.in; then
+      if test "$CATOBJEXT" = ".cat"; then
+	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:2675: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2680 "configure"
+#include "confdefs.h"
+#include <linux/version.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2685: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  msgformat=linux
+else
+  echo "$ac_t""no" 1>&6
+msgformat=xopen
+fi
+
+
+	          	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+      fi
+            sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+	 $srcdir/po2tbl.sed.in > po2tbl.sed
+   fi
+
+            if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   
+   
+
+   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+   
+
+      l=
+   
+
+            if test -d $srcdir/po; then
+      test -d po || mkdir po
+      if test "x$srcdir" != "x."; then
+	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+	    posrcprefix="$srcdir/"
+	 else
+	    posrcprefix="../$srcdir/"
+	 fi
+      else
+	 posrcprefix="../"
+      fi
+      rm -f po/POTFILES
+      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	 < $srcdir/po/POTFILES.in > po/POTFILES
+   fi
+  
+
+
+CONFIG_OBS=
+CONFIG_DEPS=
+CONFIG_SRCS=
+
+configdirs="doc testsuite"
+
+
+. ${srcdir}/configure.host
+
+. ${srcdir}/configure.tgt
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:2772: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2833: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_AR="${ac_tool_prefix}ar"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+  echo "$ac_t""$AR" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2865: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2897: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  RANLIB=":"
+fi
+fi
+
+for ac_prog in 'bison -y' byacc
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2934: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$YACC"; then
+  ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_YACC="$ac_prog"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+YACC="$ac_cv_prog_YACC"
+if test -n "$YACC"; then
+  echo "$ac_t""$YACC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:2986: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2991 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:3008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_type_signal=void
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_type_signal=int
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:3028: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3033 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3041: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  ac_cv_header_stdc=yes
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 3058 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "memchr" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 3076 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "free" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+  :
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3097 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:3108: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  :
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+  cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+
+for ac_hdr in ctype.h curses.h endian.h link.h \
+	memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
+	string.h sys/procfs.h sys/ptrace.h sys/reg.h \
+	term.h termio.h termios.h unistd.h wait.h sys/wait.h \
+	wchar.h wctype.h asm/debugreg.h sys/debugreg.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:3140: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3145 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3150: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
+echo "configure:3177: checking whether stat file-mode macros are broken" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3182 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined(S_ISBLK) && defined(S_IFDIR)
+# if S_ISBLK (S_IFDIR)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISBLK) && defined(S_IFCHR)
+# if S_ISBLK (S_IFCHR)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISLNK) && defined(S_IFREG)
+# if S_ISLNK (S_IFREG)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISSOCK) && defined(S_IFREG)
+# if S_ISSOCK (S_IFREG)
+You lose.
+# endif
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "You lose" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_header_stat_broken=yes
+else
+  rm -rf conftest*
+  ac_cv_header_stat_broken=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_header_stat_broken" 1>&6
+if test $ac_cv_header_stat_broken = yes; then
+  cat >> confdefs.h <<\EOF
+#define STAT_MACROS_BROKEN 1
+EOF
+
+fi
+
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:3234: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3239 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this.  */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this.  */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this.  */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+   It does not let you subtract one const X* pointer from another in an arm
+   of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this.  */
+  char *t;
+  char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+  *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+  int x[] = {25, 17};
+  const int *foo = &x[0];
+  ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+  typedef const int *iptr;
+  iptr p = 0;
+  ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+  struct s { int j; const int *ap[3]; };
+  struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+  const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:3288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_const=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+  cat >> confdefs.h <<\EOF
+#define const 
+EOF
+
+fi
+
+
+for ac_func in setpgid sbrk sigaction isascii bzero bcopy btowc
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3312: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3317 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:3367: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3372 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:3379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_header_alloca_h=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:3400: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3405 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:3433: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_alloca_works=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+  # that cause trouble.  Some versions do not even contain alloca or
+  # contain a buggy version.  If you still want to use their alloca,
+  # use ar to extract alloca.o from them instead of compiling alloca.c.
+  ALLOCA=alloca.${ac_objext}
+  cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:3465: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3470 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "webecray" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_os_cray=yes
+else
+  rm -rf conftest*
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3495: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3500 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+  break
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:3550: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_c_stack_direction=0
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3558 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+  static char *addr = 0;
+  auto char dummy;
+  if (addr == 0)
+    {
+      addr = &dummy;
+      return find_stack_direction ();
+    }
+  else
+    return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+  exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:3577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_stack_direction=1
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+
+echo $ac_n "checking whether malloc must be declared""... $ac_c" 1>&6
+echo "configure:3600: checking whether malloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_malloc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3605 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) malloc
+; return 0; }
+EOF
+if { (eval echo configure:3626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_decl_needed_malloc=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_decl_needed_malloc=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_malloc" 1>&6
+if test $bfd_cv_decl_needed_malloc = yes; then
+  cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_MALLOC 1
+EOF
+
+fi
+
+echo $ac_n "checking whether realloc must be declared""... $ac_c" 1>&6
+echo "configure:3647: checking whether realloc must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_realloc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3652 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) realloc
+; return 0; }
+EOF
+if { (eval echo configure:3673: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_decl_needed_realloc=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_decl_needed_realloc=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_realloc" 1>&6
+if test $bfd_cv_decl_needed_realloc = yes; then
+  cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_REALLOC 1
+EOF
+
+fi
+
+echo $ac_n "checking whether free must be declared""... $ac_c" 1>&6
+echo "configure:3694: checking whether free must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_free'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3699 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) free
+; return 0; }
+EOF
+if { (eval echo configure:3720: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_decl_needed_free=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_decl_needed_free=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_free" 1>&6
+if test $bfd_cv_decl_needed_free = yes; then
+  cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_FREE 1
+EOF
+
+fi
+
+echo $ac_n "checking whether strerror must be declared""... $ac_c" 1>&6
+echo "configure:3741: checking whether strerror must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strerror'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3746 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) strerror
+; return 0; }
+EOF
+if { (eval echo configure:3767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_decl_needed_strerror=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_decl_needed_strerror=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_strerror" 1>&6
+if test $bfd_cv_decl_needed_strerror = yes; then
+  cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRERROR 1
+EOF
+
+fi
+
+echo $ac_n "checking whether strdup must be declared""... $ac_c" 1>&6
+echo "configure:3788: checking whether strdup must be declared" >&5
+if eval "test \"`echo '$''{'bfd_cv_decl_needed_strdup'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3793 "configure"
+#include "confdefs.h"
+
+#include <stdio.h>
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+int main() {
+char *(*pfn) = (char *(*)) strdup
+; return 0; }
+EOF
+if { (eval echo configure:3814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_decl_needed_strdup=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_decl_needed_strdup=yes
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$bfd_cv_decl_needed_strdup" 1>&6
+if test $bfd_cv_decl_needed_strdup = yes; then
+  cat >> confdefs.h <<\EOF
+#define NEED_DECLARATION_STRDUP 1
+EOF
+
+fi
+
+
+
+# The following save_state_t checkery is only necessary for HPUX 
+# versions earlier than 10.20.  When those fade from memory, this 
+# could be expunged. --jsm 1999-03-22
+
+echo $ac_n "checking for HPUX save_state structure""... $ac_c" 1>&6
+echo "configure:3841: checking for HPUX save_state structure" >&5
+cat > conftest.$ac_ext <<EOF
+#line 3843 "configure"
+#include "confdefs.h"
+#include <machine/save_state.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "save_state_t" >/dev/null 2>&1; then
+  rm -rf conftest*
+  gdb_cv_hpux_savestate=yes
+else
+  rm -rf conftest*
+  gdb_cv_hpux_savestate=no
+fi
+rm -f conftest*
+
+cat > conftest.$ac_ext <<EOF
+#line 3858 "configure"
+#include "confdefs.h"
+#include <machine/save_state.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "ss_wide" >/dev/null 2>&1; then
+  rm -rf conftest*
+  gdb_cv_hpux_sswide=yes
+else
+  rm -rf conftest*
+  gdb_cv_hpux_sswide=no
+fi
+rm -f conftest*
+
+if test $gdb_cv_hpux_savestate = yes
+then
+  cat >> confdefs.h <<\EOF
+#define HAVE_STRUCT_SAVE_STATE_T 1
+EOF
+
+fi
+if test $gdb_cv_hpux_sswide = yes
+then
+  cat >> confdefs.h <<\EOF
+#define HAVE_STRUCT_MEMBER_SS_WIDE 1
+EOF
+
+fi
+echo "$ac_t""$gdb_cv_hpux_sswide" 1>&6
+
+
+# If we are configured native on GNU/Linux, work around problems with
+# sys/procfs.h
+# Also detect which type of /proc is in use, such as for Unixware.
+
+if test "${target}" = "${host}"; then
+  case "${host}" in
+  i[3456]86-*-linux*)
+	cat >> confdefs.h <<\EOF
+#define START_INFERIOR_TRAPS_EXPECTED 2
+EOF
+
+	cat >> confdefs.h <<\EOF
+#define sys_quotactl 1
+EOF
+
+	;;
+  esac
+  echo $ac_n "checking for directory proc entries""... $ac_c" 1>&6
+echo "configure:3907: checking for directory proc entries" >&5
+# The [gdb_host != sun4sol2] hack is because Solaris does provide the
+# multiple procfs files as of Solaris 2.6, but GDB can't use it right now.
+  if test "$ac_cv_header_sys_procfs_h" = yes -a "$gdb_host" != sun4sol2 \
+  -a -d /proc/$$ \
+  -a -f /proc/$$/ctl \
+  -a -f /proc/$$/as \
+  -a -f /proc/$$/map \
+  -a -f /proc/$$/status; then
+    echo "$ac_t""yes" 1>&6
+    cat >> confdefs.h <<\EOF
+#define HAVE_MULTIPLE_PROC_FDS 1
+EOF
+
+  else
+    echo "$ac_t""no" 1>&6
+  fi
+fi
+
+if test "$ac_cv_header_sys_procfs_h" = yes; then
+  echo $ac_n "checking for pstatus_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:3928: checking for pstatus_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_pstatus_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3933 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+pstatus_t avar
+; return 0; }
+EOF
+if { (eval echo configure:3940: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_pstatus_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_pstatus_t=no
+   
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_pstatus_t = yes; then
+   cat >> confdefs.h <<\EOF
+#define HAVE_PSTATUS_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_pstatus_t" 1>&6
+
+  echo $ac_n "checking for prrun_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:3962: checking for prrun_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_prrun_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3967 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+prrun_t avar
+; return 0; }
+EOF
+if { (eval echo configure:3974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_prrun_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_prrun_t=no
+   
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_prrun_t = yes; then
+   cat >> confdefs.h <<\EOF
+#define HAVE_PRRUN_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_prrun_t" 1>&6
+
+  echo $ac_n "checking for gregset_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:3996: checking for gregset_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_gregset_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4001 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+gregset_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_gregset_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_gregset_t=no
+   
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_gregset_t = yes; then
+   cat >> confdefs.h <<\EOF
+#define HAVE_GREGSET_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_gregset_t" 1>&6
+
+  echo $ac_n "checking for fpregset_t in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4030: checking for fpregset_t in sys/procfs.h" >&5
+ if eval "test \"`echo '$''{'bfd_cv_have_sys_procfs_type_fpregset_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4035 "configure"
+#include "confdefs.h"
+#include <sys/procfs.h>
+int main() {
+fpregset_t avar
+; return 0; }
+EOF
+if { (eval echo configure:4042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_fpregset_t=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  bfd_cv_have_sys_procfs_type_fpregset_t=no
+   
+fi
+rm -f conftest*
+fi
+
+ if test $bfd_cv_have_sys_procfs_type_fpregset_t = yes; then
+   cat >> confdefs.h <<\EOF
+#define HAVE_FPREGSET_T 1
+EOF
+
+ fi
+ echo "$ac_t""$bfd_cv_have_sys_procfs_type_fpregset_t" 1>&6
+
+
+  
+  echo $ac_n "checking for PIOCSET ioctl entry in sys/procfs.h""... $ac_c" 1>&6
+echo "configure:4066: checking for PIOCSET ioctl entry in sys/procfs.h" >&5
+  if eval "test \"`echo '$''{'gdb_cv_have_procfs_piocset'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4071 "configure"
+#include "confdefs.h"
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/procfs.h>
+
+int main() {
+
+    int dummy;;
+    dummy = ioctl(0, PIOCSET, &dummy);
+  
+; return 0; }
+EOF
+if { (eval echo configure:4084: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  gdb_cv_have_procfs_piocset=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gdb_cv_have_procfs_piocset=no
+fi
+rm -f conftest*
+fi
+
+  echo "$ac_t""$gdb_cv_have_procfs_piocset" 1>&6
+  if test $gdb_cv_have_procfs_piocset = yes; then
+    cat >> confdefs.h <<\EOF
+#define HAVE_PROCFS_PIOCSET 1
+EOF
+
+  fi
+fi
+
+echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
+echo "configure:4106: checking for main in -lm" >&5
+ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lm  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4114 "configure"
+#include "confdefs.h"
+
+int main() {
+main()
+; return 0; }
+EOF
+if { (eval echo configure:4121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lm $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+echo $ac_n "checking for wctype in -lc""... $ac_c" 1>&6
+echo "configure:4150: checking for wctype in -lc" >&5
+ac_lib_var=`echo c'_'wctype | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lc  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4158 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char wctype();
+
+int main() {
+wctype()
+; return 0; }
+EOF
+if { (eval echo configure:4169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  : 
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for wctype in -lw""... $ac_c" 1>&6
+echo "configure:4188: checking for wctype in -lw" >&5
+ac_lib_var=`echo w'_'wctype | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lw  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4196 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char wctype();
+
+int main() {
+wctype()
+; return 0; }
+EOF
+if { (eval echo configure:4207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo w | sed -e 's/^a-zA-Z0-9_/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lw $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+
+
+echo $ac_n "checking for long long support in compiler""... $ac_c" 1>&6
+echo "configure:4239: checking for long long support in compiler" >&5
+if eval "test \"`echo '$''{'gdb_cv_c_long_long'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4244 "configure"
+#include "confdefs.h"
+
+int main() {
+
+  extern long long foo;
+  switch (foo & 2) { case 0: return 1; }
+
+; return 0; }
+EOF
+if { (eval echo configure:4254: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  gdb_cv_c_long_long=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gdb_cv_c_long_long=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gdb_cv_c_long_long" 1>&6
+if test $gdb_cv_c_long_long = yes; then
+  cat >> confdefs.h <<\EOF
+#define CC_HAS_LONG_LONG 1
+EOF
+
+fi
+
+
+echo $ac_n "checking for long long support in printf""... $ac_c" 1>&6
+echo "configure:4276: checking for long long support in printf" >&5
+if eval "test \"`echo '$''{'gdb_cv_printf_has_long_long'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  gdb_cv_printf_has_long_long=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4284 "configure"
+#include "confdefs.h"
+
+int main () {
+  char buf[32];
+  long long l = 0;
+  l = (l << 16) + 0x0123;
+  l = (l << 16) + 0x4567;
+  l = (l << 16) + 0x89ab;
+  l = (l << 16) + 0xcdef;
+  sprintf (buf, "0x%016llx", l);
+  return (strcmp ("0x0123456789abcdef", buf));
+}
+EOF
+if { (eval echo configure:4298: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  gdb_cv_printf_has_long_long=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  gdb_cv_printf_has_long_long=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+if test $gdb_cv_printf_has_long_long = yes; then
+  cat >> confdefs.h <<\EOF
+#define PRINTF_HAS_LONG_LONG 1
+EOF
+
+fi
+echo "$ac_t""$gdb_cv_printf_has_long_long" 1>&6
+
+
+echo $ac_n "checking for long double support in compiler""... $ac_c" 1>&6
+echo "configure:4322: checking for long double support in compiler" >&5
+if eval "test \"`echo '$''{'ac_cv_c_long_double'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4327 "configure"
+#include "confdefs.h"
+
+int main() {
+long double foo;
+; return 0; }
+EOF
+if { (eval echo configure:4334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_long_double=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_long_double=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_long_double" 1>&6
+if test $ac_cv_c_long_double = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_LONG_DOUBLE 1
+EOF
+
+fi
+
+
+echo $ac_n "checking for long double support in printf""... $ac_c" 1>&6
+echo "configure:4356: checking for long double support in printf" >&5
+if eval "test \"`echo '$''{'gdb_cv_printf_has_long_double'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  gdb_cv_printf_has_long_double=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4364 "configure"
+#include "confdefs.h"
+
+int main () {
+  char buf[16];
+  long double f = 3.141592653;
+  sprintf (buf, "%Lg", f);
+  return (strncmp ("3.14159", buf, 7));
+}
+EOF
+if { (eval echo configure:4374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  gdb_cv_printf_has_long_double=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  gdb_cv_printf_has_long_double=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+if test $gdb_cv_printf_has_long_double = yes; then
+  cat >> confdefs.h <<\EOF
+#define PRINTF_HAS_LONG_DOUBLE 1
+EOF
+
+fi
+echo "$ac_t""$gdb_cv_printf_has_long_double" 1>&6
+
+
+echo $ac_n "checking for long double support in scanf""... $ac_c" 1>&6
+echo "configure:4398: checking for long double support in scanf" >&5
+if eval "test \"`echo '$''{'gdb_cv_scanf_has_long_double'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  gdb_cv_scanf_has_long_double=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4406 "configure"
+#include "confdefs.h"
+
+int main () {
+  char *buf = "3.141592653";
+  long double f = 0;
+  sscanf (buf, "%Lg", &f);
+  return !(f > 3.14159 && f < 3.14160);
+}
+EOF
+if { (eval echo configure:4416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  gdb_cv_scanf_has_long_double=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  gdb_cv_scanf_has_long_double=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+if test $gdb_cv_scanf_has_long_double = yes; then
+  cat >> confdefs.h <<\EOF
+#define SCANF_HAS_LONG_DOUBLE 1
+EOF
+
+fi
+echo "$ac_t""$gdb_cv_scanf_has_long_double" 1>&6
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4442: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4447 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:4452: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:4481: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4486 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:4509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:4534: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 4542 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the filesystem buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propogated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h.  */
+# ifndef HAVE_SYS_PARAM_H
+#  define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+	char *data, *data2, *data3;
+	int i, pagesize;
+	int fd;
+
+	pagesize = getpagesize();
+
+	/*
+	 * First, make a file with some known garbage in it.
+	 */
+	data = malloc(pagesize);
+	if (!data)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		*(data + i) = rand();
+	umask(0);
+	fd = creat("conftestmmap", 0600);
+	if (fd < 0)
+		exit(1);
+	if (write(fd, data, pagesize) != pagesize)
+		exit(1);
+	close(fd);
+
+	/*
+	 * Next, try to mmap the file at a fixed address which
+	 * already has something else allocated at it.  If we can,
+	 * also make sure that we see the same garbage.
+	 */
+	fd = open("conftestmmap", O_RDWR);
+	if (fd < 0)
+		exit(1);
+	data2 = malloc(2 * pagesize);
+	if (!data2)
+		exit(1);
+	data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+	if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+	    MAP_PRIVATE | MAP_FIXED, fd, 0L))
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data2 + i))
+			exit(1);
+
+	/*
+	 * Finally, make sure that changes to the mapped area
+	 * do not percolate back to the file as seen by read().
+	 * (This is a bug on some variants of i386 svr4.0.)
+	 */
+	for (i = 0; i < pagesize; ++i)
+		*(data2 + i) = *(data2 + i) + 1;
+	data3 = malloc(pagesize);
+	if (!data3)
+		exit(1);
+	if (read(fd, data3, pagesize) != pagesize)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data3 + i))
+			exit(1);
+	close(fd);
+	unlink("conftestmmap");
+	exit(0);
+}
+
+EOF
+if { (eval echo configure:4682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+
+
+if test ${build} = ${host} -a ${host} = ${target} ; then
+   case ${host_os} in
+   hpux*)
+      echo $ac_n "checking for HPUX/OSF thread support""... $ac_c" 1>&6
+echo "configure:4711: checking for HPUX/OSF thread support" >&5
+      if test -f /usr/include/dce/cma_config.h ; then
+         if test "$GCC" = "yes" ; then
+            echo "$ac_t""yes" 1>&6
+            cat >> confdefs.h <<\EOF
+#define HAVE_HPUX_THREAD_SUPPORT 1
+EOF
+
+            CONFIG_OBS="${CONFIG_OJS} hpux-thread.o"
+            CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
+         else
+            echo "$ac_t""no (suppressed because you are not using GCC)" 1>&6
+         fi
+      else
+         echo "$ac_t""no" 1>&6
+      fi
+      ;;
+   solaris*)
+      echo $ac_n "checking for Solaris thread debugging library""... $ac_c" 1>&6
+echo "configure:4730: checking for Solaris thread debugging library" >&5
+      if test -f /usr/lib/libthread_db.so.1 ; then
+         echo "$ac_t""yes" 1>&6
+         cat >> confdefs.h <<\EOF
+#define HAVE_THREAD_DB_LIB 1
+EOF
+
+         CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
+         CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
+         echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:4740: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4748 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:4759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo dl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-ldl $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+         if test "$GCC" = "yes" ; then
+            # The GNU linker requires the -export-dynamic option to make
+            # all symbols visible in the dynamic symbol table.
+            hold_ldflags=$LDFLAGS
+            echo $ac_n "checking for the ld -export-dynamic flag""... $ac_c" 1>&6
+echo "configure:4791: checking for the ld -export-dynamic flag" >&5
+            LDFLAGS="${LDFLAGS} -Wl,-export-dynamic"
+            cat > conftest.$ac_ext <<EOF
+#line 4794 "configure"
+#include "confdefs.h"
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:4801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  found=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  found=no
+fi
+rm -f conftest*
+            LDFLAGS=$hold_ldflags
+            echo "$ac_t""$found" 1>&6
+            if test $found = yes; then
+               CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -Wl,-export-dynamic"
+            fi
+         fi
+	 # Sun randomly tweaked the prototypes in <proc_service.h>
+	 # at one point.
+	 echo $ac_n "checking if <proc_service.h> is old""... $ac_c" 1>&6
+echo "configure:4820: checking if <proc_service.h> is old" >&5
+	 if eval "test \"`echo '$''{'gdb_cv_proc_service_is_old'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  
+	    cat > conftest.$ac_ext <<EOF
+#line 4826 "configure"
+#include "confdefs.h"
+
+		#include <proc_service.h>
+		ps_err_e ps_pdwrite
+		    (struct ps_prochandle*, psaddr_t, const void*, size_t);
+	    
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:4837: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  gdb_cv_proc_service_is_old=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gdb_cv_proc_service_is_old=yes
+fi
+rm -f conftest*
+	 
+fi
+
+	 echo "$ac_t""$gdb_cv_proc_service_is_old" 1>&6
+	 if test $gdb_cv_proc_service_is_old = yes; then
+	    cat >> confdefs.h <<\EOF
+#define PROC_SERVICE_IS_OLD 1
+EOF
+
+	 fi
+      else
+         echo "$ac_t""no" 1>&6
+      fi
+      ;;
+   esac
+   
+fi
+
+ENABLE_CFLAGS=
+
+# Check whether --enable-tui or --disable-tui was given.
+if test "${enable_tui+set}" = set; then
+  enableval="$enable_tui"
+  
+  case "${enable_tui}" in
+    yes | no) ;;
+    "")  enable_tui=yes ;;
+    *)
+      { echo "configure: error: Bad value for --enable-tui: ${enableval}" 1>&2; exit 1; }
+    ;;
+  esac
+
+fi
+
+case ${enable_tui} in
+  "yes" )
+    cat >> confdefs.h <<\EOF
+#define TUI 1
+EOF
+
+    BUILD_TUI=all-tui
+    TUI_LIBRARY=tui/libtui.a
+  ;;
+  * )
+    BUILD_TUI=
+    TUI_LIBRARY=
+  ;;
+esac
+
+
+
+# Check whether --enable-netrom or --disable-netrom was given.
+if test "${enable_netrom+set}" = set; then
+  enableval="$enable_netrom"
+  case "${enableval}" in
+yes)	enable_netrom=yes ;;
+no)	enable_netrom=no ;;
+*)	{ echo "configure: error: bad value ${enableval} given for netrom option" 1>&2; exit 1; } ;;
+esac
+fi
+
+
+if test "${enable_netrom}" = "yes"; then
+	CONFIG_OBS="${CONFIG_OBS} remote-nrom.o" 
+        CONFIG_SRCS="${CONFIG_SRCS} remote-nrom.c"
+fi
+
+# Check whether --enable-build-warnings or --disable-build-warnings was given.
+if test "${enable_build_warnings+set}" = set; then
+  enableval="$enable_build_warnings"
+  build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations"
+case "${enableval}" in
+  yes)	;;
+  no)	build_warnings="-w";;
+  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${build_warnings} ${t}";;
+  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${t} ${build_warnings}";;
+  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+else
+  build_warnings=""
+fi
+
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+   WARN_CFLAGS="${build_warnings}"
+else
+   WARN_CFLAGS=""
+fi
+
+
+MMALLOC_CFLAGS=
+MMALLOC=
+
+
+
+# Check whether --with-mmalloc or --without-mmalloc was given.
+if test "${with_mmalloc+set}" = set; then
+  withval="$with_mmalloc"
+  case "${withval}" in
+  yes)  want_mmalloc=true ;;
+  no)   want_mmalloc=false;;
+  *)    { echo "configure: error: bad value ${withval} for GDB with-mmalloc option" 1>&2; exit 1; } ;;
+esac
+else
+  want_mmalloc=false
+fi
+
+if test x$want_mmalloc = xtrue; then
+   cat >> confdefs.h <<\EOF
+#define USE_MMALLOC 1
+EOF
+
+   cat >> confdefs.h <<\EOF
+#define MMCHECK_FORCE 1
+EOF
+
+   MMALLOC_CFLAGS="-I$srcdir/../mmalloc"
+   MMALLOC='../mmalloc/libmmalloc.a'
+fi
+
+if test x$gdb_cv_os_cygwin = xyes; then
+  TERM_LIB='`if test -r ../libtermcap/libtermcap.a; then echo ../libtermcap/libtermcap.a; else echo -ltermcap; fi`'
+else
+  TERM_LIB=
+  echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
+echo "configure:4974: checking for tgetent in -lncurses" >&5
+ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lncurses  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4982 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:4993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-lncurses
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for tgetent in -lHcurses""... $ac_c" 1>&6
+echo "configure:5012: checking for tgetent in -lHcurses" >&5
+ac_lib_var=`echo Hcurses'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lHcurses  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5020 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:5031: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-lHcurses
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for tgetent in -ltermlib""... $ac_c" 1>&6
+echo "configure:5050: checking for tgetent in -ltermlib" >&5
+ac_lib_var=`echo termlib'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ltermlib  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5058 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:5069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-ltermlib
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
+echo "configure:5088: checking for tgetent in -ltermcap" >&5
+ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ltermcap  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5096 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:5107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-ltermcap
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for tgetent in -lcurses""... $ac_c" 1>&6
+echo "configure:5126: checking for tgetent in -lcurses" >&5
+ac_lib_var=`echo curses'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lcurses  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5134 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:5145: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-lcurses
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for tgetent in -lterminfo""... $ac_c" 1>&6
+echo "configure:5164: checking for tgetent in -lterminfo" >&5
+ac_lib_var=`echo terminfo'_'tgetent | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lterminfo  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5172 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char tgetent();
+
+int main() {
+tgetent()
+; return 0; }
+EOF
+if { (eval echo configure:5183: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  TERM_LIB=-lterminfo
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+fi
+
+
+  if test "x$TERM_LIB" = x
+  then
+    { echo "configure: error: Could not find a term library" 1>&2; exit 1; }
+  fi
+fi
+
+
+
+# If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:5227: checking for X" >&5
+
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+  withval="$with_x"
+  :
+fi
+
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+  # The user explicitly disabled X.
+  have_x=disabled
+else
+  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+    # Both variables are already set.
+    have_x=yes
+  else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+  cd conftestdir
+  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+  cat > Imakefile <<'EOF'
+acfindx:
+	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+    for ac_extension in a so sl; do
+      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+        test -f $ac_im_libdir/libX11.$ac_extension; then
+        ac_im_usrlibdir=$ac_im_libdir; break
+      fi
+    done
+    # Screen out bogus values from the imake configuration.  They are
+    # bogus both because they are the default anyway, and because
+    # using them would break gcc on systems where it needs fixed includes.
+    case "$ac_im_incroot" in
+	/usr/include) ;;
+	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+    esac
+    case "$ac_im_usrlibdir" in
+	/usr/lib | /lib) ;;
+	*) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
+    esac
+  fi
+  cd ..
+  rm -fr conftestdir
+fi
+
+if test "$ac_x_includes" = NO; then
+  # Guess where to find include files, by looking for this one X11 .h file.
+  test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
+
+  # First, try using that file with no special directory specified.
+cat > conftest.$ac_ext <<EOF
+#line 5289 "configure"
+#include "confdefs.h"
+#include <$x_direct_test_include>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:5294: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  # We can compile using X headers with no special include directory.
+ac_x_includes=
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+  for ac_dir in               \
+    /usr/X11/include          \
+    /usr/X11R6/include        \
+    /usr/X11R5/include        \
+    /usr/X11R4/include        \
+                              \
+    /usr/include/X11          \
+    /usr/include/X11R6        \
+    /usr/include/X11R5        \
+    /usr/include/X11R4        \
+                              \
+    /usr/local/X11/include    \
+    /usr/local/X11R6/include  \
+    /usr/local/X11R5/include  \
+    /usr/local/X11R4/include  \
+                              \
+    /usr/local/include/X11    \
+    /usr/local/include/X11R6  \
+    /usr/local/include/X11R5  \
+    /usr/local/include/X11R4  \
+                              \
+    /usr/X386/include         \
+    /usr/x386/include         \
+    /usr/XFree86/include/X11  \
+                              \
+    /usr/include              \
+    /usr/local/include        \
+    /usr/unsupported/include  \
+    /usr/athena/include       \
+    /usr/local/x11r5/include  \
+    /usr/lpp/Xamples/include  \
+                              \
+    /usr/openwin/include      \
+    /usr/openwin/share/include \
+    ; \
+  do
+    if test -r "$ac_dir/$x_direct_test_include"; then
+      ac_x_includes=$ac_dir
+      break
+    fi
+  done
+fi
+rm -f conftest*
+fi # $ac_x_includes = NO
+
+if test "$ac_x_libraries" = NO; then
+  # Check for the libraries.
+
+  test -z "$x_direct_test_library" && x_direct_test_library=Xt
+  test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+  # See if we find them without any special options.
+  # Don't add to $LIBS permanently.
+  ac_save_LIBS="$LIBS"
+  LIBS="-l$x_direct_test_library $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 5363 "configure"
+#include "confdefs.h"
+
+int main() {
+${x_direct_test_function}()
+; return 0; }
+EOF
+if { (eval echo configure:5370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+    /usr/X11/lib          \
+    /usr/X11R6/lib        \
+    /usr/X11R5/lib        \
+    /usr/X11R4/lib        \
+                          \
+    /usr/lib/X11          \
+    /usr/lib/X11R6        \
+    /usr/lib/X11R5        \
+    /usr/lib/X11R4        \
+                          \
+    /usr/local/X11/lib    \
+    /usr/local/X11R6/lib  \
+    /usr/local/X11R5/lib  \
+    /usr/local/X11R4/lib  \
+                          \
+    /usr/local/lib/X11    \
+    /usr/local/lib/X11R6  \
+    /usr/local/lib/X11R5  \
+    /usr/local/lib/X11R4  \
+                          \
+    /usr/X386/lib         \
+    /usr/x386/lib         \
+    /usr/XFree86/lib/X11  \
+                          \
+    /usr/lib              \
+    /usr/local/lib        \
+    /usr/unsupported/lib  \
+    /usr/athena/lib       \
+    /usr/local/x11r5/lib  \
+    /usr/lpp/Xamples/lib  \
+    /lib/usr/lib/X11	  \
+                          \
+    /usr/openwin/lib      \
+    /usr/openwin/share/lib \
+    ; \
+do
+  for ac_extension in a so sl; do
+    if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+      ac_x_libraries=$ac_dir
+      break 2
+    fi
+  done
+done
+fi
+rm -f conftest*
+fi # $ac_x_libraries = NO
+
+if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+  # Didn't find X anywhere.  Cache the known absence of X.
+  ac_cv_have_x="have_x=no"
+else
+  # Record where we found X for the cache.
+  ac_cv_have_x="have_x=yes \
+	        ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+  fi
+  eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+  echo "$ac_t""$have_x" 1>&6
+  no_x=yes
+else
+  # If each of the values was on the command line, it overrides each guess.
+  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+  # Update the cache value to reflect the command line values.
+  ac_cv_have_x="have_x=yes \
+		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+  echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+fi
+
+
+
+
+
+
+
+
+# Begin stuff to support --enable-shared
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  case "${enableval}" in
+  yes) shared=true ;;
+  no)  shared=false ;;
+  *) shared=true ;;
+esac
+fi
+
+HLDFLAGS=
+HLDENV=
+# If we have shared libraries, try to set rpath reasonably.
+if test "${shared}" = "true"; then
+  case "${host}" in
+  *-*-hpux*)
+    HLDFLAGS='-Wl,+s,+b,$(libdir)'
+    ;;
+  *-*-irix5* | *-*-irix6*)
+    HLDFLAGS='-Wl,-rpath,$(libdir)'
+    ;;
+  *-*-linux*aout*)
+    ;;
+  *-*-linux* | *-pc-linux-gnu)
+    HLDFLAGS='-Wl,-rpath,$(libdir)'
+    ;;
+  *-*-solaris*)
+    HLDFLAGS='-R $(libdir)'
+    ;;
+  *-*-sysv4*)
+    HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
+    ;;
+  esac
+fi
+
+# On SunOS, if the linker supports the -rpath option, use it to
+# prevent ../bfd and ../opcodes from being included in the run time
+# search path.
+case "${host}" in
+  *-*-sunos*)
+    echo 'main () { }' > conftest.c
+    ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
+    if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'No such file' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'some text already loaded' conftest.t >/dev/null 2>&1; then
+      :
+    elif test "${shared}" = "true"; then
+      HLDFLAGS='-Wl,-rpath=$(libdir)'
+    else
+      HLDFLAGS='-Wl,-rpath='
+    fi
+    rm -f conftest.t conftest.c conftest
+    ;;
+esac
+
+
+# End stuff to support --enable-shared
+
+# target_subdir is used by the testsuite to find the target libraries.
+target_subdir=
+if test "${host}" != "${target}"; then
+    target_subdir="${target_alias}/"
+fi
+
+
+frags=
+host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
+if test ! -f ${host_makefile_frag}; then
+{ echo "configure: error: "*** Gdb does not support host ${host}"" 1>&2; exit 1; }
+fi
+frags="$frags $host_makefile_frag"
+
+target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
+if test ! -f ${target_makefile_frag}; then
+{ echo "configure: error: "*** Gdb does not support target ${target}"" 1>&2; exit 1; }
+fi
+frags="$frags $target_makefile_frag"
+
+
+
+
+
+hostfile=`sed -n '
+s/XM_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${host_makefile_frag}`
+
+targetfile=`sed -n '
+s/TM_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${target_makefile_frag}`
+
+# these really aren't orthogonal true/false values of the same condition,
+# but shells are slow enough that I like to reuse the test conditions
+# whenever possible
+if test "${target}" = "${host}"; then
+nativefile=`sed -n '
+s/NAT_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${host_makefile_frag}`
+# else
+# GDBserver is only useful in a "native" enviroment
+# configdirs=`echo $configdirs | sed 's/gdbserver//'`
+fi
+
+
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
+# (NAT_FILE) is not set in config/*/*.m[ht] files, we don't make the
+# corresponding links.  But we have to remove the xm.h files and tm.h
+# files anyway, e.g. when switching from "configure host" to
+# "configure none".
+
+files=
+links=
+rm -f xm.h
+if test "${hostfile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${hostfile}"
+links="${links} xm.h"
+fi
+rm -f tm.h
+if test "${targetfile}" != ""; then
+files="${files} config/${gdb_target_cpu}/${targetfile}"
+links="${links} tm.h"
+fi
+rm -f nm.h
+if test "${nativefile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${nativefile}"
+links="${links} nm.h"
+else
+# A cross-only configuration.
+files="${files} config/nm-empty.h"
+links="${links} nm.h"
+fi
+
+
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:5602: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 5607 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:5618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:5635: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 5640 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:5647: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:5666: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:5676: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
+  else
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+
+subdirs="$configdirs"
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile tui/Makefile .gdbinit:gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@CPP@%$CPP%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@RANLIB@%$RANLIB%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@AR@%$AR%g
+s%@YACC@%$YACC%g
+s%@CONFIG_LDFLAGS@%$CONFIG_LDFLAGS%g
+s%@BUILD_TUI@%$BUILD_TUI%g
+s%@TUI_LIBRARY@%$TUI_LIBRARY%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@MMALLOC_CFLAGS@%$MMALLOC_CFLAGS%g
+s%@MMALLOC@%$MMALLOC%g
+s%@TERM_LIB@%$TERM_LIB%g
+s%@ENABLE_CFLAGS@%$ENABLE_CFLAGS%g
+s%@CONFIG_OBS@%$CONFIG_OBS%g
+s%@CONFIG_DEPS@%$CONFIG_DEPS%g
+s%@CONFIG_SRCS@%$CONFIG_SRCS%g
+s%@HLDFLAGS@%$HLDFLAGS%g
+s%@HLDENV@%$HLDENV%g
+s%@target_subdir@%$target_subdir%g
+/@host_makefile_frag@/r $host_makefile_frag
+s%@host_makefile_frag@%%g
+/@target_makefile_frag@/r $target_makefile_frag
+s%@target_makefile_frag@%%g
+s%@frags@%$frags%g
+s%@EXEEXT@%$EXEEXT%g
+s%@subdirs@%$subdirs%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile tui/Makefile .gdbinit:gdbinit.in"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$files"
+ac_dests="$links"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+  set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+  set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+  echo "linking $srcdir/$ac_source to $ac_dest"
+
+  if test ! -r $srcdir/$ac_source; then
+    { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+  fi
+  rm -f $ac_dest
+
+  # Make relative symlinks.
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+    # The dest file is in a subdirectory.
+    test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+    ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dest_dir_suffix.
+    ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dest_dir_suffix= ac_dots=
+  fi
+
+  case "$srcdir" in
+  [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+  *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+  esac
+
+  # Make a symlink if possible; otherwise try a hard link.
+  if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+    ln $srcdir/$ac_source $ac_dest; then :
+  else
+    { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+  fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+gdb_host_cpu=$gdb_host_cpu
+gdb_target_cpu=$gdb_target_cpu
+nativefile=$nativefile
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+if test "${nativefile}" = ""; then
+sed -e '/^NATDEPFILES[ 	]*=[ 	]*/s//# NATDEPFILES=/' \
+	< Makefile > Makefile.tem
+mv -f Makefile.tem Makefile
+fi
+
+sed -e '/^TM_FILE[ 	]*=/s,^TM_FILE[ 	]*=[ 	]*,&config/'"${gdb_target_cpu}"'/,
+/^XM_FILE[ 	]*=/s,^XM_FILE[ 	]*=[ 	]*,&config/'"${gdb_host_cpu}"'/,
+/^NAT_FILE[ 	]*=/s,^NAT_FILE[ 	]*=[ 	]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
+mv -f Makefile.tmp Makefile
+
+case x$CONFIG_HEADERS in
+xconfig.h:config.in)
+echo > stamp-h ;;
+esac
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+if test "$no_recursion" != yes; then
+
+  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  ac_sub_configure_args=
+  ac_prev=
+  for ac_arg in $ac_configure_args; do
+    if test -n "$ac_prev"; then
+      ac_prev=
+      continue
+    fi
+    case "$ac_arg" in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+      ac_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+      ac_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
+    esac
+  done
+
+  for ac_config_dir in $configdirs; do
+
+    # Do not complain, so a configure script can configure whichever
+    # parts of a large source tree are present.
+    if test ! -d $srcdir/$ac_config_dir; then
+      continue
+    fi
+
+    echo configuring in $ac_config_dir
+
+    case "$srcdir" in
+    .) ;;
+    *)
+      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
+      else
+        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
+      fi
+      ;;
+    esac
+
+    ac_popdir=`pwd`
+    cd $ac_config_dir
+
+      # A "../" for each directory in /$ac_config_dir.
+      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+
+    case "$srcdir" in
+    .) # No --srcdir option.  We are building in place.
+      ac_sub_srcdir=$srcdir ;;
+    /*) # Absolute path.
+      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
+    *) # Relative path.
+      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
+    esac
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_sub_srcdir/configure; then
+      ac_sub_configure=$ac_sub_srcdir/configure
+    elif test -f $ac_sub_srcdir/configure.in; then
+      ac_sub_configure=$ac_configure
+    else
+      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
+      ac_sub_configure=
+    fi
+
+    # The recursion is here.
+    if test -n "$ac_sub_configure"; then
+
+      # Make the cache file name correct relative to the subdirectory.
+      case "$cache_file" in
+      /*) ac_sub_cache_file=$cache_file ;;
+      *) # Relative path.
+        ac_sub_cache_file="$ac_dots$cache_file" ;;
+      esac
+  case "$ac_given_INSTALL" in
+        [/$]*) INSTALL="$ac_given_INSTALL" ;;
+        *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+        esac
+
+      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
+      # The eval makes quoting arguments work.
+      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
+      then :
+      else
+        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
+      fi
+    fi
+
+    cd $ac_popdir
+  done
+fi
+
+
+exit 0
diff --git a/gdb/configure.host b/gdb/configure.host
new file mode 100644
index 0000000..aca63e6
--- /dev/null
+++ b/gdb/configure.host
@@ -0,0 +1,162 @@
+# Mapping of configurations into GDB host definitions.  This is
+# invoked from the autoconf generated configure script.
+
+# This file sets the following shell variables:
+#  gdb_host_cpu		generic name of host's CPU
+#  gdb_host		name of GDB host definition to use
+
+# Map host cpu into the config cpu subdirectory name.
+# The default is $host_cpu.
+
+case "${host_cpu}" in
+
+alpha*)			gdb_host_cpu=alpha ;;
+c[12])			gdb_host_cpu=convex ;;
+hppa*)			gdb_host_cpu=pa ;;
+i[3456]86*)		gdb_host_cpu=i386 ;;
+m68*)			gdb_host_cpu=m68k ;;
+m88*)			gdb_host_cpu=m88k ;;
+# OBSOLETE np1)			gdb_host_cpu=gould ;;
+pyramid)		gdb_host_cpu=pyr ;;
+powerpc*)		gdb_host_cpu=powerpc ;;
+sparc64)		gdb_host_cpu=sparc ;;
+*)			gdb_host_cpu=$host_cpu ;;
+
+esac
+
+# map host info into gdb names.
+
+case "${host}" in
+
+a29k-*-*)		gdb_host=ultra3 ;;
+
+alpha*-*-osf1*)		gdb_host=alpha-osf1 ;;
+alpha*-*-osf2*)		gdb_host=alpha-osf2 ;;
+alpha*-*-osf[3456789]*)	gdb_host=alpha-osf3 ;;
+alpha*-*-linux*)	gdb_host=alpha-linux ;;
+
+arm-*-*)		gdb_host=arm ;;
+
+c[12]-*-*)		gdb_host=convex ;;
+
+hppa*-*-bsd*)		gdb_host=hppabsd ;;
+hppa*-*-hiux*)		gdb_host=hppahpux ;;
+hppa*-*-hpux10.20)	gdb_host=hpux1020 ;;
+hppa*-*-hpux11.0*)	gdb_host=hpux1100 ;;
+hppa*-*-hpux*)		gdb_host=hppahpux ;;
+hppa*-*-osf*)		gdb_host=hppaosf ;;
+
+i[3456]86-ncr-*)	gdb_host=ncr3000 ;;
+i[3456]86-sequent-bsd*)	gdb_host=symmetry ;;  # dynix
+i[3456]86-sequent-sysv4*) gdb_host=ptx4 ;;
+i[3456]86-sequent-sysv*) gdb_host=ptx ;;
+i[3456]86-*-aix*)	gdb_host=i386aix ;;
+i[3456]86-*-bsd*)	gdb_host=i386bsd ;;
+i[3456]86-*-dgux*)	gdb_host=i386dgux ;;
+i[3456]86-*-freebsd*)	gdb_host=fbsd ;;
+i[3456]86-*-netbsd*)	gdb_host=nbsd ;;
+i[3456]86-*-go32*)	gdb_host=go32 ;;
+i[3456]86-*-linux*)	gdb_host=linux ;;
+i[3456]86-*-lynxos*)	gdb_host=i386lynx ;;
+i[3456]86-*-mach3*)	gdb_host=i386m3 ;;
+i[3456]86-*-mach*)	gdb_host=i386mach ;;
+i[3456]86-*-gnu*)	gdb_host=i386gnu ;;
+i[3456]86-*-osf1mk*)	gdb_host=i386mk ;;
+i[3456]86-*-sco3.2v5*)	gdb_host=i386sco5 ;;
+i[3456]86-*-sco3.2v4*)	gdb_host=i386sco4 ;;
+i[3456]86-*-sco*)	gdb_host=i386sco ;;
+i[3456]86-*-solaris*)	gdb_host=i386sol2 ;;
+i[3456]86-*-sunos*)	gdb_host=sun386 ;;
+i[3456]86-*-sysv3.2*)	gdb_host=i386v32 ;;
+i[3456]86-*-sysv32*)	gdb_host=i386v32 ;;
+i[3456]86-*-sysv4.2*)	gdb_host=i386v42mp ;;
+i[3456]86-*-sysv4*)	gdb_host=i386v4 ;;
+i[3456]86-*-sysv5*)	gdb_host=i386v42mp ;;
+i[3456]86-*-unixware2*)	gdb_host=i386v42mp ;;
+i[3456]86-*-unixware*)	gdb_host=i386v4 ;;
+i[3456]86-*-sysv*)	gdb_host=i386v ;;
+i[3456]86-*-isc*)	gdb_host=i386v32 ;;
+i[3456]86-*-cygwin*)	gdb_host=cygwin ;;
+m680[01]0-sun-sunos3*)	gdb_host=sun2os3 ;;
+m680[01]0-sun-sunos4*)	gdb_host=sun2os4 ;;
+m68030-sony-*)		gdb_host=news1000 ;;
+
+m68*-altos-*)		gdb_host=altos ;;
+m68*-apollo*-sysv*)	gdb_host=apollo68v ;;
+m68*-apollo*-bsd*)	gdb_host=apollo68b ;;
+m68*-att-*)		gdb_host=3b1 ;;
+m68*-bull*-sysv*)	gdb_host=dpx2 ;;
+m68*-hp-bsd*)		gdb_host=hp300bsd ;;
+m68*-hp-hpux*)		gdb_host=hp300hpux ;;
+m68*-isi-*)		gdb_host=isi ;;
+m68*-*-linux*)		gdb_host=linux ;;
+m68*-*-lynxos*)		gdb_host=m68klynx ;;
+m68*-*-netbsd*)		gdb_host=nbsd ;;
+m68*-*-sysv4*)		gdb_host=m68kv4 ;;
+m68*-motorola-*)	gdb_host=delta68 ;;
+m68*-sony-*)		gdb_host=news ;;
+m68*-sun-sunos3*)	gdb_host=sun3os3 ;;
+m68*-sun-sunos4*)	gdb_host=sun3os4 ;;
+m68*-sun-*)		gdb_host=sun3os4 ;;
+
+m88*-harris-cxux*)	gdb_host=cxux ;;
+m88*-motorola-sysv4*)	gdb_host=delta88v4 ;;
+m88*-motorola-sysv*)	gdb_host=delta88 ;;
+m88*-*-*)		gdb_host=m88k ;;
+
+mips-dec-mach3*)	gdb_host=mach3 ;;
+mips-dec-*)		gdb_host=decstation ;;
+mips-little-*)		gdb_host=littlemips ;;
+mips-sgi-irix3*)	gdb_host=irix3 ;;
+mips-sgi-irix4*)	gdb_host=irix4 ;;
+mips-sgi-irix5*)	gdb_host=irix5 ;;
+# Close enough for now.
+mips-sgi-irix6*)	gdb_host=irix5 ;;
+mips-sony-*)		gdb_host=news-mips ;;
+mips-*-mach3*)		gdb_host=mipsm3 ;;
+mips-*-sysv4*)		gdb_host=mipsv4 ;;
+mips-*-sysv*)		gdb_host=riscos ;;
+mips-*-riscos*)		gdb_host=riscos ;;
+
+none-*-*)		gdb_host=none ;;
+
+# OBSOLETE np1-*-*)		gdb_host=np1 ;;
+
+ns32k-*-mach3*)		gdb_host=ns32km3 ;;
+ns32k-*-netbsd*)	gdb_host=nbsd ;;
+ns32k-umax-*)		gdb_host=umax ;;
+ns32k-utek-sysv*)	gdb_host=merlin ;;
+
+powerpc-*-aix*)		gdb_host=aix ;;
+powerpcle-*-cygwin*)	gdb_host=cygwin ;;
+powerpcle-*-solaris*)	gdb_host=solaris ;;
+powerpc-*-linux*)	gdb_host=linux ;;
+
+# OBSOLETE pn-*-*)			gdb_host=pn ;;
+
+pyramid-*-*)		gdb_host=pyramid ;;
+
+romp-*-*)		gdb_host=rtbsd ;;
+
+rs6000-*-lynxos*)	gdb_host=rs6000lynx ;;
+rs6000-*-aix4*)		gdb_host=aix4 ;;
+rs6000-*-*)		gdb_host=rs6000 ;;
+
+sparc-*-linux*)		gdb_host=linux ;;
+sparc-*-lynxos*)	gdb_host=sparclynx ;;
+sparc-*-netbsd*)	gdb_host=nbsd ;;
+sparc-*-solaris2*)	gdb_host=sun4sol2 ;;
+sparc-*-sunos4*)	gdb_host=sun4os4 ;;
+sparc-*-sunos5*)	gdb_host=sun4sol2 ;;
+sparc-*-*)		gdb_host=sun4os4 ;;
+sparc64-*-*)		gdb_host=sun4sol2 ;;
+
+strongarm-*-*)		gdb_host=arm ;;
+
+tahoe-*-*)		gdb_host=tahoe ;;
+
+vax-*-bsd*)		gdb_host=vaxbsd ;;
+vax-*-ultrix2*)		gdb_host=vaxult2 ;;
+vax-*-ultrix*)		gdb_host=vaxult ;;
+
+esac
diff --git a/gdb/configure.in b/gdb/configure.in
new file mode 100644
index 0000000..d658118
--- /dev/null
+++ b/gdb/configure.in
@@ -0,0 +1,606 @@
+dnl Autoconf configure script for GDB, the GNU debugger.
+dnl Copyright 1995, 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
+dnl
+dnl This file is part of GDB.
+dnl 
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl 
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+dnl GNU General Public License for more details.
+dnl 
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.13)dnl
+AC_INIT(main.c)
+AC_CONFIG_HEADER(config.h:config.in)
+
+AC_PROG_CC
+AC_AIX
+AC_ISC_POSIX
+AM_PROG_CC_STDC
+
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
+AC_CANONICAL_SYSTEM
+
+dnl gdb doesn't use gettext, but bfd does.  We call this to ensure we
+dnl link with the correct libraries.
+ALL_LINGUAS=
+CY_GNU_GETTEXT
+
+dnl List of object files added by configure.
+
+CONFIG_OBS=
+CONFIG_DEPS=
+CONFIG_SRCS=
+
+configdirs="doc testsuite"
+
+dnl
+changequote(,)dnl
+
+. ${srcdir}/configure.host
+
+. ${srcdir}/configure.tgt
+
+dnl
+changequote([,])dnl
+
+AC_PROG_INSTALL
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_PROG_YACC
+
+AC_ARG_PROGRAM
+
+AC_TYPE_SIGNAL
+
+AC_HEADER_STDC
+
+AC_CHECK_HEADERS(ctype.h curses.h endian.h link.h \
+	memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
+	string.h sys/procfs.h sys/ptrace.h sys/reg.h \
+	term.h termio.h termios.h unistd.h wait.h sys/wait.h \
+	wchar.h wctype.h asm/debugreg.h sys/debugreg.h)
+AC_HEADER_STAT
+
+AC_C_CONST
+
+AC_CHECK_FUNCS(setpgid sbrk sigaction isascii bzero bcopy btowc)
+AC_FUNC_ALLOCA
+
+BFD_NEED_DECLARATION(malloc)
+BFD_NEED_DECLARATION(realloc)
+BFD_NEED_DECLARATION(free)
+BFD_NEED_DECLARATION(strerror)
+BFD_NEED_DECLARATION(strdup)
+
+
+# The following save_state_t checkery is only necessary for HPUX 
+# versions earlier than 10.20.  When those fade from memory, this 
+# could be expunged. --jsm 1999-03-22
+
+AC_MSG_CHECKING(for HPUX save_state structure)
+AC_EGREP_HEADER(save_state_t, machine/save_state.h, 
+                gdb_cv_hpux_savestate=yes, gdb_cv_hpux_savestate=no)
+AC_EGREP_HEADER(ss_wide, machine/save_state.h, gdb_cv_hpux_sswide=yes,
+                gdb_cv_hpux_sswide=no)
+if test $gdb_cv_hpux_savestate = yes
+then
+  AC_DEFINE(HAVE_STRUCT_SAVE_STATE_T, 1)
+fi
+if test $gdb_cv_hpux_sswide = yes
+then
+  AC_DEFINE(HAVE_STRUCT_MEMBER_SS_WIDE, 1)
+fi
+AC_MSG_RESULT($gdb_cv_hpux_sswide)
+
+
+# If we are configured native on GNU/Linux, work around problems with
+# sys/procfs.h
+# Also detect which type of /proc is in use, such as for Unixware.
+
+if test "${target}" = "${host}"; then
+  case "${host}" in
+  i[[3456]]86-*-linux*)
+	AC_DEFINE(START_INFERIOR_TRAPS_EXPECTED,2)
+	AC_DEFINE(sys_quotactl)
+	;;
+  esac
+  AC_MSG_CHECKING(for directory proc entries)
+# The [gdb_host != sun4sol2] hack is because Solaris does provide the
+# multiple procfs files as of Solaris 2.6, but GDB can't use it right now.
+  if test "$ac_cv_header_sys_procfs_h" = yes -a "$gdb_host" != sun4sol2 \
+  -a -d /proc/$$ \
+  -a -f /proc/$$/ctl \
+  -a -f /proc/$$/as \
+  -a -f /proc/$$/map \
+  -a -f /proc/$$/status; then
+    AC_MSG_RESULT(yes)
+    AC_DEFINE(HAVE_MULTIPLE_PROC_FDS)
+  else
+    AC_MSG_RESULT(no)
+  fi
+fi
+
+if test "$ac_cv_header_sys_procfs_h" = yes; then
+  BFD_HAVE_SYS_PROCFS_TYPE(pstatus_t)
+  BFD_HAVE_SYS_PROCFS_TYPE(prrun_t)
+  BFD_HAVE_SYS_PROCFS_TYPE(gregset_t)
+  BFD_HAVE_SYS_PROCFS_TYPE(fpregset_t)
+
+  dnl Check for PIOCSET ioctl entry 
+
+  AC_MSG_CHECKING(for PIOCSET ioctl entry in sys/procfs.h)
+  AC_CACHE_VAL(gdb_cv_have_procfs_piocset,
+  [AC_TRY_COMPILE([#include <unistd.h>
+#include <sys/types.h>
+#include <sys/procfs.h>
+], [
+    int dummy;;
+    dummy = ioctl(0, PIOCSET, &dummy);
+  ],
+  gdb_cv_have_procfs_piocset=yes, gdb_cv_have_procfs_piocset=no)])
+  AC_MSG_RESULT($gdb_cv_have_procfs_piocset)
+  if test $gdb_cv_have_procfs_piocset = yes; then
+    AC_DEFINE(HAVE_PROCFS_PIOCSET)
+  fi
+fi
+
+dnl See if host has libm.  This is usually needed by simulators.
+AC_CHECK_LIB(m, main)
+
+dnl Solaris puts wctype in /usr/lib/libw.a before Solaris 2.6.
+dnl
+dnl A bug in GNU ld 2.9.1 causes a problem if we link in -lw 
+dnl under Solaris 2.6 because it is some funky empty library.
+dnl So only link in libw if we have to.
+AC_CHECK_LIB(c, wctype,: ,AC_CHECK_LIB(w, wctype))
+
+dnl See if compiler supports "long long" type.
+
+AC_MSG_CHECKING(for long long support in compiler)
+AC_CACHE_VAL(gdb_cv_c_long_long,
+[AC_TRY_COMPILE(, [
+  extern long long foo;
+  switch (foo & 2) { case 0: return 1; }
+],
+gdb_cv_c_long_long=yes, gdb_cv_c_long_long=no)])
+AC_MSG_RESULT($gdb_cv_c_long_long)
+if test $gdb_cv_c_long_long = yes; then
+  AC_DEFINE(CC_HAS_LONG_LONG)
+fi
+
+dnl See if the compiler and runtime support printing long long
+
+AC_MSG_CHECKING(for long long support in printf)
+AC_CACHE_VAL(gdb_cv_printf_has_long_long,
+[AC_TRY_RUN([
+int main () {
+  char buf[32];
+  long long l = 0;
+  l = (l << 16) + 0x0123;
+  l = (l << 16) + 0x4567;
+  l = (l << 16) + 0x89ab;
+  l = (l << 16) + 0xcdef;
+  sprintf (buf, "0x%016llx", l);
+  return (strcmp ("0x0123456789abcdef", buf));
+}],
+gdb_cv_printf_has_long_long=yes,
+gdb_cv_printf_has_long_long=no,
+gdb_cv_printf_has_long_long=no)])
+if test $gdb_cv_printf_has_long_long = yes; then
+  AC_DEFINE(PRINTF_HAS_LONG_LONG)
+fi
+AC_MSG_RESULT($gdb_cv_printf_has_long_long)
+
+dnl See if compiler supports "long double" type.  Can't use AC_C_LONG_DOUBLE
+dnl because autoconf complains about cross-compilation issues.  However, this
+dnl code uses the same variables as the macro for compatibility.
+
+AC_MSG_CHECKING(for long double support in compiler)
+AC_CACHE_VAL(ac_cv_c_long_double,
+[AC_TRY_COMPILE(, [long double foo;],
+ac_cv_c_long_double=yes, ac_cv_c_long_double=no)])
+AC_MSG_RESULT($ac_cv_c_long_double)
+if test $ac_cv_c_long_double = yes; then
+  AC_DEFINE(HAVE_LONG_DOUBLE)
+fi
+
+dnl See if the compiler and runtime support printing long doubles
+
+AC_MSG_CHECKING(for long double support in printf)
+AC_CACHE_VAL(gdb_cv_printf_has_long_double,
+[AC_TRY_RUN([
+int main () {
+  char buf[16];
+  long double f = 3.141592653;
+  sprintf (buf, "%Lg", f);
+  return (strncmp ("3.14159", buf, 7));
+}],
+gdb_cv_printf_has_long_double=yes,
+gdb_cv_printf_has_long_double=no,
+gdb_cv_printf_has_long_double=no)])
+if test $gdb_cv_printf_has_long_double = yes; then
+  AC_DEFINE(PRINTF_HAS_LONG_DOUBLE)
+fi
+AC_MSG_RESULT($gdb_cv_printf_has_long_double)
+
+dnl See if the compiler and runtime support scanning long doubles
+
+AC_MSG_CHECKING(for long double support in scanf)
+AC_CACHE_VAL(gdb_cv_scanf_has_long_double,
+[AC_TRY_RUN([
+int main () {
+  char *buf = "3.141592653";
+  long double f = 0;
+  sscanf (buf, "%Lg", &f);
+  return !(f > 3.14159 && f < 3.14160);
+}],
+gdb_cv_scanf_has_long_double=yes,
+gdb_cv_scanf_has_long_double=no,
+gdb_cv_scanf_has_long_double=no)])
+if test $gdb_cv_scanf_has_long_double = yes; then
+  AC_DEFINE(SCANF_HAS_LONG_DOUBLE)
+fi
+AC_MSG_RESULT($gdb_cv_scanf_has_long_double)
+
+AC_FUNC_MMAP
+
+dnl See if thread_db library is around for Solaris thread debugging.  Note that
+dnl we must explicitly test for version 1 of the library because version 0
+dnl (present on Solaris 2.4 or earlier) doesn't have the same API.
+
+dnl Note that we only want this if we are both native (host == target), and
+dnl not doing a canadian cross build (build == host).
+
+if test ${build} = ${host} -a ${host} = ${target} ; then
+   case ${host_os} in
+   hpux*)
+      AC_MSG_CHECKING(for HPUX/OSF thread support)
+      if test -f /usr/include/dce/cma_config.h ; then
+         if test "$GCC" = "yes" ; then
+            AC_MSG_RESULT(yes)
+            AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT)
+            CONFIG_OBS="${CONFIG_OJS} hpux-thread.o"
+            CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
+         else
+            AC_MSG_RESULT(no (suppressed because you are not using GCC))
+         fi
+      else
+         AC_MSG_RESULT(no)
+      fi
+      ;;
+   solaris*)
+      AC_MSG_CHECKING(for Solaris thread debugging library)
+      if test -f /usr/lib/libthread_db.so.1 ; then
+         AC_MSG_RESULT(yes)
+         AC_DEFINE(HAVE_THREAD_DB_LIB)
+         CONFIG_OBS="${CONFIG_OBS} sol-thread.o"
+         CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
+         AC_CHECK_LIB(dl, dlopen)
+         if test "$GCC" = "yes" ; then
+            # The GNU linker requires the -export-dynamic option to make
+            # all symbols visible in the dynamic symbol table.
+            hold_ldflags=$LDFLAGS
+            AC_MSG_CHECKING(for the ld -export-dynamic flag)
+            LDFLAGS="${LDFLAGS} -Wl,-export-dynamic"
+            AC_TRY_LINK(, [int i;], found=yes, found=no)
+            LDFLAGS=$hold_ldflags
+            AC_MSG_RESULT($found)
+            if test $found = yes; then
+               CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -Wl,-export-dynamic"
+            fi
+         fi
+	 # Sun randomly tweaked the prototypes in <proc_service.h>
+	 # at one point.
+	 AC_MSG_CHECKING(if <proc_service.h> is old)
+	 AC_CACHE_VAL(gdb_cv_proc_service_is_old,[
+	    AC_TRY_COMPILE([
+		#include <proc_service.h>
+		ps_err_e ps_pdwrite
+		    (struct ps_prochandle*, psaddr_t, const void*, size_t);
+	    ],, gdb_cv_proc_service_is_old=no,
+	        gdb_cv_proc_service_is_old=yes)
+	 ])
+	 AC_MSG_RESULT($gdb_cv_proc_service_is_old)
+	 if test $gdb_cv_proc_service_is_old = yes; then
+	    AC_DEFINE(PROC_SERVICE_IS_OLD)
+	 fi
+      else
+         AC_MSG_RESULT(no)
+      fi
+      ;;
+   esac
+   AC_SUBST(CONFIG_LDFLAGS)
+fi
+
+dnl Handle optional features that can be enabled.
+ENABLE_CFLAGS=
+
+AC_ARG_ENABLE(tui,
+[  --enable-tui            Enable full-screen terminal user interface],
+[
+  case "${enable_tui}" in
+    yes | no) ;;
+    "")  enable_tui=yes ;;
+    *)
+      AC_MSG_ERROR(Bad value for --enable-tui: ${enableval})
+    ;;
+  esac
+])
+case ${enable_tui} in
+  "yes" )
+    AC_DEFINE(TUI)
+    BUILD_TUI=all-tui
+    TUI_LIBRARY=tui/libtui.a
+  ;;
+  * )
+    BUILD_TUI=
+    TUI_LIBRARY=
+  ;;
+esac
+AC_SUBST(BUILD_TUI)
+AC_SUBST(TUI_LIBRARY)
+
+AC_ARG_ENABLE(netrom,
+[  --enable-netrom         Enable NetROM support],
+[case "${enableval}" in
+yes)	enable_netrom=yes ;;
+no)	enable_netrom=no ;;
+*)	AC_MSG_ERROR(bad value ${enableval} given for netrom option) ;;
+esac])
+
+if test "${enable_netrom}" = "yes"; then
+	CONFIG_OBS="${CONFIG_OBS} remote-nrom.o" 
+        CONFIG_SRCS="${CONFIG_SRCS} remote-nrom.c"
+fi
+
+AC_ARG_ENABLE(build-warnings,
+[  --enable-build-warnings Enable build-time compiler warnings if gcc is used],
+[build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations"
+case "${enableval}" in
+  yes)	;;
+  no)	build_warnings="-w";;
+  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${build_warnings} ${t}";;
+  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
+        build_warnings="${t} ${build_warnings}";;
+  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac],[build_warnings=""])dnl
+
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+   WARN_CFLAGS="${build_warnings}"
+else
+   WARN_CFLAGS=""
+fi
+AC_SUBST(WARN_CFLAGS)
+
+MMALLOC_CFLAGS=
+MMALLOC=
+AC_SUBST(MMALLOC_CFLAGS)
+AC_SUBST(MMALLOC)
+
+AC_ARG_WITH(mmalloc,
+[  --with-mmalloc          Use memory mapped malloc package],
+[case "${withval}" in
+  yes)  want_mmalloc=true ;;
+  no)   want_mmalloc=false;;
+  *)    AC_MSG_ERROR(bad value ${withval} for GDB with-mmalloc option) ;;
+esac],[want_mmalloc=false])dnl
+
+if test x$want_mmalloc = xtrue; then
+   AC_DEFINE(USE_MMALLOC)
+   AC_DEFINE(MMCHECK_FORCE)
+   MMALLOC_CFLAGS="-I$srcdir/../mmalloc"
+   MMALLOC='../mmalloc/libmmalloc.a'
+fi
+
+dnl Figure out which term library to use.
+if test x$gdb_cv_os_cygwin = xyes; then
+  TERM_LIB='`if test -r ../libtermcap/libtermcap.a; then echo ../libtermcap/libtermcap.a; else echo -ltermcap; fi`'
+else
+  TERM_LIB=
+  AC_CHECK_LIB(ncurses, tgetent, TERM_LIB=-lncurses,
+    AC_CHECK_LIB(Hcurses, tgetent, TERM_LIB=-lHcurses,
+      AC_CHECK_LIB(termlib, tgetent, TERM_LIB=-ltermlib,
+        AC_CHECK_LIB(termcap, tgetent, TERM_LIB=-ltermcap,
+	  AC_CHECK_LIB(curses, tgetent, TERM_LIB=-lcurses,
+	    AC_CHECK_LIB(terminfo, tgetent, TERM_LIB=-lterminfo))))))
+
+  if test "x$TERM_LIB" = x
+  then
+    AC_MSG_ERROR(Could not find a term library, e.g. termcap or termlib!)
+  fi
+fi
+AC_SUBST(TERM_LIB)
+
+
+AC_PATH_X
+
+AC_SUBST(ENABLE_CFLAGS)
+
+AC_SUBST(CONFIG_OBS)
+AC_SUBST(CONFIG_DEPS)
+AC_SUBST(CONFIG_SRCS)
+
+# Begin stuff to support --enable-shared
+AC_ARG_ENABLE(shared,
+[  --enable-shared         Use shared libraries],
+[case "${enableval}" in
+  yes) shared=true ;;
+  no)  shared=false ;;
+  *) shared=true ;;
+esac])dnl
+
+HLDFLAGS=
+HLDENV=
+# If we have shared libraries, try to set rpath reasonably.
+if test "${shared}" = "true"; then
+  case "${host}" in
+  *-*-hpux*)
+    HLDFLAGS='-Wl,+s,+b,$(libdir)'
+    ;;
+  *-*-irix5* | *-*-irix6*)
+    HLDFLAGS='-Wl,-rpath,$(libdir)'
+    ;;
+  *-*-linux*aout*)
+    ;;
+  *-*-linux* | *-pc-linux-gnu)
+    HLDFLAGS='-Wl,-rpath,$(libdir)'
+    ;;
+  *-*-solaris*)
+    HLDFLAGS='-R $(libdir)'
+    ;;
+  *-*-sysv4*)
+    HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
+    ;;
+  esac
+fi
+
+# On SunOS, if the linker supports the -rpath option, use it to
+# prevent ../bfd and ../opcodes from being included in the run time
+# search path.
+case "${host}" in
+  *-*-sunos*)
+    echo 'main () { }' > conftest.c
+    ${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
+    if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'No such file' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
+      :
+    elif grep 'some text already loaded' conftest.t >/dev/null 2>&1; then
+      :
+    elif test "${shared}" = "true"; then
+      HLDFLAGS='-Wl,-rpath=$(libdir)'
+    else
+      HLDFLAGS='-Wl,-rpath='
+    fi
+    rm -f conftest.t conftest.c conftest
+    ;;
+esac
+AC_SUBST(HLDFLAGS)
+AC_SUBST(HLDENV)
+# End stuff to support --enable-shared
+
+# target_subdir is used by the testsuite to find the target libraries.
+target_subdir=
+if test "${host}" != "${target}"; then
+    target_subdir="${target_alias}/"
+fi
+AC_SUBST(target_subdir)
+
+frags=
+host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
+if test ! -f ${host_makefile_frag}; then
+AC_MSG_ERROR("*** Gdb does not support host ${host}")
+fi
+frags="$frags $host_makefile_frag"
+
+target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
+if test ! -f ${target_makefile_frag}; then
+AC_MSG_ERROR("*** Gdb does not support target ${target}")
+fi
+frags="$frags $target_makefile_frag"
+
+AC_SUBST_FILE(host_makefile_frag)
+AC_SUBST_FILE(target_makefile_frag)
+AC_SUBST(frags)
+
+changequote(,)dnl
+hostfile=`sed -n '
+s/XM_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${host_makefile_frag}`
+
+targetfile=`sed -n '
+s/TM_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${target_makefile_frag}`
+
+# these really aren't orthogonal true/false values of the same condition,
+# but shells are slow enough that I like to reuse the test conditions
+# whenever possible
+if test "${target}" = "${host}"; then
+nativefile=`sed -n '
+s/NAT_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${host_makefile_frag}`
+# else
+# GDBserver is only useful in a "native" enviroment
+# configdirs=`echo $configdirs | sed 's/gdbserver//'`
+fi
+changequote([,])
+
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
+# (NAT_FILE) is not set in config/*/*.m[ht] files, we don't make the
+# corresponding links.  But we have to remove the xm.h files and tm.h
+# files anyway, e.g. when switching from "configure host" to
+# "configure none".
+
+files=
+links=
+rm -f xm.h
+if test "${hostfile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${hostfile}"
+links="${links} xm.h"
+fi
+rm -f tm.h
+if test "${targetfile}" != ""; then
+files="${files} config/${gdb_target_cpu}/${targetfile}"
+links="${links} tm.h"
+fi
+rm -f nm.h
+if test "${nativefile}" != ""; then
+files="${files} config/${gdb_host_cpu}/${nativefile}"
+links="${links} nm.h"
+else
+# A cross-only configuration.
+files="${files} config/nm-empty.h"
+links="${links} nm.h"
+fi
+
+AC_LINK_FILES($files, $links)
+
+dnl Check for exe extension set on certain hosts (e.g. Win32)
+AC_EXEEXT
+
+AC_CONFIG_SUBDIRS($configdirs)
+AC_OUTPUT(Makefile tui/Makefile .gdbinit:gdbinit.in,
+[
+dnl Autoconf doesn't provide a mechanism for modifying definitions 
+dnl provided by makefile fragments.
+dnl
+if test "${nativefile}" = ""; then
+sed -e '/^NATDEPFILES[[ 	]]*=[[ 	]]*/s//# NATDEPFILES=/' \
+	< Makefile > Makefile.tem
+mv -f Makefile.tem Makefile
+fi
+
+changequote(,)dnl
+sed -e '/^TM_FILE[ 	]*=/s,^TM_FILE[ 	]*=[ 	]*,&config/'"${gdb_target_cpu}"'/,
+/^XM_FILE[ 	]*=/s,^XM_FILE[ 	]*=[ 	]*,&config/'"${gdb_host_cpu}"'/,
+/^NAT_FILE[ 	]*=/s,^NAT_FILE[ 	]*=[ 	]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
+mv -f Makefile.tmp Makefile
+changequote([,])dnl
+
+case x$CONFIG_HEADERS in
+xconfig.h:config.in)
+echo > stamp-h ;;
+esac
+],
+[
+gdb_host_cpu=$gdb_host_cpu
+gdb_target_cpu=$gdb_target_cpu
+nativefile=$nativefile
+])
+
+exit 0
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
new file mode 100644
index 0000000..95fc274
--- /dev/null
+++ b/gdb/configure.tgt
@@ -0,0 +1,282 @@
+# Mappings from configurations to GDB target definitions.  This is
+# invoked from the autoconf generated configure script.
+
+# This file sets the following shell variables:
+#  gdb_target_cpu	generic name of CPU
+#  gdb_target		name of GDB target definition to use
+
+# This file may also modify configdirs.
+
+# Map target cpu into the config cpu subdirectory name.
+# The default is $target_cpu.
+
+case "${target_cpu}" in
+
+alpha*)			gdb_target_cpu=alpha ;;
+c[12])			gdb_target_cpu=convex ;;
+hppa*)			gdb_target_cpu=pa ;;
+i[3456]86*)		gdb_target_cpu=i386 ;;
+m68*)			gdb_target_cpu=m68k ;;
+m88*)			gdb_target_cpu=m88k ;;
+mips*)			gdb_target_cpu=mips ;;
+# OBSOLETE np1)			gdb_target_cpu=gould ;;
+powerpc*)		gdb_target_cpu=powerpc ;;
+# OBSOLETE pn)			gdb_target_cpu=gould ;;
+pyramid)		gdb_target_cpu=pyr ;;
+sparc*)			gdb_target_cpu=sparc ;;
+thumb*)			gdb_target_cpu=arm ;;
+strongarm*)		gdb_target_cpu=arm ;;
+v850*)			gdb_target_cpu=v850 ;;
+*)			gdb_target_cpu=$target_cpu ;;
+
+esac
+
+# map target info into gdb names.
+
+case "${target}" in
+
+a29k-*-aout*)		gdb_target=a29k ;;
+a29k-*-coff*)		gdb_target=a29k ;;
+a29k-*-elf*)		gdb_target=a29k ;;
+a29k-*-ebmon*)		gdb_target=a29k ;;
+a29k-*-kern*)		gdb_target=a29k-kern ;;
+a29k-*-none*)		gdb_target=a29k ;;
+a29k-*-sym1*)		gdb_target=ultra3 ;;
+a29k-*-udi*)		gdb_target=a29k-udi ;;
+a29k-*-vxworks*)        gdb_target=vx29k ;;
+
+alpha*-*-osf*)		gdb_target=alpha-osf1 ;;
+alpha*-*-linux*)	gdb_target=alpha-linux ;;
+
+arc-*-*)		gdb_target=arc ;;
+
+arm-*-* | thumb-*-* | strongarm-*-*)	gdb_target=arm
+
+			# rdi doesn't work for wingdb yet
+			case $gdb_host in
+			windows) ;;
+			*)
+			    configdirs="$configdirs rdi-share"
+			    CONFIG_OBS="$CONFIG_OBS remote-rdi.o rdi-share/libangsd.a"
+			    ;;
+			esac
+			;;
+
+c1-*-*)			gdb_target=convex ;;
+c2-*-*)			gdb_target=convex ;;
+
+d10v-*-*)		gdb_target=d10v ;;
+d30v-*-*)		gdb_target=d30v ;;
+
+h8300-*-*)		gdb_target=h8300 ;;
+h8500-*-*)		gdb_target=h8500 ;;
+
+sh-*-*)			gdb_target=sh ;;
+
+fr30-*-elf*)		gdb_target=fr30 ;;
+
+hppa*-*-bsd*)		gdb_target=hppabsd ;;
+hppa*-*-pro*)		gdb_target=hppapro ;;
+hppa*-*-hpux*)		gdb_target=hppahpux ;;
+hppa*-*-hiux*)		gdb_target=hppahpux ;;
+hppa*-*-osf*)		gdb_target=hppaosf ;;
+
+i[3456]86-sequent-bsd*)	gdb_target=symmetry ;;
+i[3456]86-sequent-sysv4*) gdb_target=ptx4 ;;
+i[3456]86-sequent-sysv*) gdb_target=ptx ;;
+i[3456]86-ncr-*)	gdb_target=ncr3000 ;;
+i[3456]86-*-aout*)	gdb_target=i386aout ;;
+i[3456]86-*-coff*)	gdb_target=i386v ;;
+i[3456]86-*-elf*)	gdb_target=i386v ;;
+i[3456]86-*-aix*)	gdb_target=i386aix ;;
+i[3456]86-*-bsd*)	gdb_target=i386bsd ;;
+i[3456]86-*-freebsd*)	gdb_target=fbsd ;;
+i[3456]86-*-netbsd*)	gdb_target=nbsd ;;
+i[3456]86-*-os9k)	gdb_target=i386os9k ;;
+i[3456]86-*-go32*)	gdb_target=i386aout ;;
+i[3456]86-*-lynxos*)	gdb_target=i386lynx
+		configdirs="${configdirs} gdbserver" ;;
+i[3456]86-*-solaris*)	gdb_target=i386sol2 ;;
+i[3456]86-*-sunos*)	gdb_target=sun386 ;;
+i[3456]86-*-sysv4.2MP)	gdb_target=i386v42mp ;;
+i[3456]86-*-sysv4.2uw2*)	gdb_target=i386v42mp ;;
+i[3456]86-*-sysv4*)	gdb_target=i386v4 ;;
+i[3456]86-*-unixware2*)	gdb_target=i386v42mp ;;
+i[3456]86-*-unixware*)	gdb_target=i386v4 ;;
+i[3456]86-*-sco3.2v4*)	gdb_target=i386sco4 ;;
+i[3456]86-*-sco3.2v5*)	gdb_target=i386sco5 ;;
+i[3456]86-*-sco*)	gdb_target=i386v ;;
+i[3456]86-*-sysv*)	gdb_target=i386v ;;
+i[3456]86-*-linux*)	gdb_target=linux
+		configdirs="${configdirs} gdbserver" ;;
+i[3456]86-pc-linux-gnu)	gdb_target=linux
+		configdirs="${configdirs} gdbserver" ;;
+i[3456]86-*-isc*)	gdb_target=i386v ;;
+i[3456]86-*-mach3*)	gdb_target=i386m3 ;;
+i[3456]86-*-gnu*)	gdb_target=i386gnu ;;
+i[3456]86-*-netware*)	gdb_target=i386nw
+		configdirs="${configdirs} nlm" ;;
+i[3456]86-*-osf1mk*)	gdb_target=i386mk ;;
+i[3456]86-*-cygwin*)	gdb_target=cygwin  ;;
+i960-*-bout*)		gdb_target=vxworks960 ;;
+i960-nindy-coff*)	gdb_target=nindy960 ;;
+i960-*-coff*)		gdb_target=mon960 ;;
+i960-nindy-elf*)	gdb_target=nindy960 ;;
+i960-*-elf*)		gdb_target=mon960 ;;
+
+i960-*-nindy*)		gdb_target=nindy960 ;;
+i960-*-vxworks*)	gdb_target=vxworks960 ;;
+
+m32r-*-elf*)		gdb_target=m32r ;;
+
+m68000-*-sunos3*)	gdb_target=sun2os3 ;;
+m68000-*-sunos4*)	gdb_target=sun2os4 ;;
+
+m68*-apollo*-bsd*)	gdb_target=apollo68b ;;
+m68*-bull-sysv*)	gdb_target=dpx2 ;;
+m68*-hp-bsd*)		gdb_target=hp300bsd ;;
+m68*-hp-hpux*)		gdb_target=hp300hpux ;;
+m68*-altos-*)		gdb_target=altos ;;
+m68*-att-*)		gdb_target=3b1 ;;
+m68*-cisco*-*)		gdb_target=cisco ;;
+m68*-ericsson-*)	gdb_target=es1800 ;;
+m68*-isi-*)		gdb_target=isi ;;
+m68*-motorola-*)	gdb_target=delta68 ;;
+m68*-netx-*)		gdb_target=vxworks68 ;;
+m68*-sony-*)		gdb_target=news ;;
+m68*-tandem-*)		gdb_target=st2000 ;;
+m68*-rom68k-*)          gdb_target=monitor ;;
+m68*-*bug-*)            gdb_target=monitor ;;
+m68*-monitor-*)         gdb_target=monitor ;;
+m68*-est-*)		gdb_target=monitor ;;
+m68*-*-aout*)		gdb_target=monitor ;;
+m68*-*-coff*)		gdb_target=monitor ;;
+m68*-*-elf*)		gdb_target=monitor ;;
+m68*-*-linux*)		gdb_target=linux
+		configdirs="${configdirs} gdbserver" ;;
+m68*-*-lynxos*)		gdb_target=m68klynx
+		configdirs="${configdirs} gdbserver" ;;
+m68*-*-netbsd*)		gdb_target=nbsd ;;
+m68*-*-os68k*)		gdb_target=os68k ;;
+m68*-*-sunos3*)		gdb_target=sun3os3 ;;
+m68*-*-sunos4*)		gdb_target=sun3os4 ;;
+m68*-*-sysv4*)		gdb_target=m68kv4 ;;
+m68*-*-vxworks*)	gdb_target=vxworks68 ;;
+
+m88*-harris-cxux*)	gdb_target=cxux ;;
+m88*-motorola-sysv4*)	gdb_target=delta88v4 ;;
+m88*-motorola-*)	gdb_target=delta88 ;;
+m88*-*-*)		gdb_target=m88k ;;
+
+mips64*-big-*)		gdb_target=bigmips64 ;;
+mips*-big-*)		gdb_target=bigmips ;;
+mips*-dec-mach3*)	gdb_target=mach3 ;;
+mips*-dec-*)		gdb_target=decstation ;;
+mips64*el-*-ecoff*)	gdb_target=embedl64 ;;
+mips64*-*-ecoff*)	gdb_target=embed64 ;;
+mips64*vr4300*el-*-elf*)	gdb_target=vr4300el ;;
+mips64*vr4300*-*-elf*)	gdb_target=vr4300 ;;
+mips64*vr4100*el-*-elf*)	gdb_target=vr4300el ;;
+mips64*vr4100*-*-elf*)	gdb_target=vr4100 ;;
+mips64*vr5000*el-*-elf*)	gdb_target=vr5000el ;;
+mips64*vr5000*-*-elf*)	gdb_target=vr5000
+		configdirs="${configdirs} gdbserver" ;;
+mips*tx39*el*-elf*)	gdb_target=tx39l ;;
+mips*tx39*-elf*)	gdb_target=tx39 ;;
+mips64*el-*-elf*)	gdb_target=embedl64 ;;
+mips64*-*-elf*)		gdb_target=embed64 ;;
+mips*el-*-ecoff*)	gdb_target=embedl ;;
+mips*-*-ecoff*)		gdb_target=embed ;;
+mips*el-*-elf*)		gdb_target=embedl ;;
+mips*-*-elf*)		gdb_target=embed ;;
+mips*-little-*)		gdb_target=littlemips ;;
+mips*-*-lnews*)		gdb_target=embedl ;;
+mips*-sgi-irix5*)	gdb_target=irix5 ;;
+mips*-sgi-irix6*)	gdb_target=irix5 ;;
+mips*-sgi-*)		gdb_target=irix3 ;;
+mips*-sony-*)		gdb_target=bigmips ;;
+mips*-*-mach3*)		gdb_target=mipsm3 ;;
+mips*-*-sysv4*)		gdb_target=mipsv4 ;;
+mips*-*-sysv*)		gdb_target=bigmips ;;
+mips*-*-riscos*)	gdb_target=bigmips ;;
+mips*-*-vxworks*)       gdb_target=vxmips ;;
+
+mn10200-*-*)		gdb_target=mn10200 ;;
+mn10300-*-*)		gdb_target=mn10300 ;;
+
+none-*-*)		gdb_target=none ;;
+
+# OBSOLETE np1-*-*)		gdb_target=np1 ;;
+
+ns32k-*-mach3*)		gdb_target=ns32km3 ;;
+ns32k-*-netbsd*)	gdb_target=nbsd ;;
+ns32k-utek-sysv*)	gdb_target=merlin ;;
+ns32k-utek-*)		gdb_target=umax ;;
+
+# OBSOLETE pn-*-*)			gdb_target=pn ;;
+
+powerpc-*-macos*)	gdb_target=macos ;;
+powerpc-*-netware*)	gdb_target=ppc-nw
+			configdirs="${configdirs} nlm" ;;
+
+powerpc-*-aix*)		gdb_target=aix ;;
+powerpcle-*-cygwin*)	gdb_target=cygwin ;;
+powerpcle-*-solaris*)	gdb_target=solaris ;;
+powerpc-*-eabi* | powerpc-*-linux* | powerpc-*-sysv* | powerpc-*-elf*)
+			if test -f ../sim/ppc/Makefile; then
+			  gdb_target=ppc-sim
+			else
+			  gdb_target=ppc-eabi
+			fi ;;
+powerpcle-*-eabi* | powerpcle-*-sysv* | powerpcle-*-elf*)
+			if test -f ../sim/ppc/Makefile; then
+			  gdb_target=ppcle-sim
+			else
+			  gdb_target=ppcle-eabi
+			fi ;;
+
+pyramid-*-*)		gdb_target=pyramid ;;
+
+rs6000-*-lynxos*)	gdb_target=rs6000lynx ;;
+rs6000-*-aix4*)		gdb_target=aix4 ;;
+rs6000-*-*)		gdb_target=rs6000 ;;
+
+sparc-*-aout*)		gdb_target=sparc-em ;;
+sparc-*-coff*)		gdb_target=sparc-em ;;
+sparc-*-elf*)		gdb_target=sparc-em ;;
+sparc-*-linux*)		gdb_target=linux ;;
+sparc-*-lynxos*)	gdb_target=sparclynx
+		configdirs="${configdirs} gdbserver" ;;
+sparc-*-netbsd*)	gdb_target=nbsd ;;
+sparc-*-solaris2*)	gdb_target=sun4sol2 ;;
+sparc-*-sunos4*)	gdb_target=sun4os4 ;;
+sparc-*-sunos5*)	gdb_target=sun4sol2 ;;
+sparc-*-vxworks*)	gdb_target=vxsparc ;;
+sparc-*-*)		gdb_target=sun4os4 ;;
+sparclet-*-*)		gdb_target=sparclet;;
+sparclite-*-*)		gdb_target=sparclite ;;
+sparc86x-*-*)		gdb_target=sparclite ;;
+# It's not clear what the right solution for "v8plus" systems is yet.
+# For now, stick with sparc-sun-solaris2 since that's what config.guess
+# should return.  Work is still needed to get gdb to print the 64 bit
+# regs (some of which are usable in v8plus) so sp64sol.mt hasn't been
+# deleted though presumably it should be eventually.
+#sparc64-*-solaris2*)	gdb_target=sp64sol2 ;;
+sparc64-*-*)		gdb_target=sp64 ;;
+
+tahoe-*-*)		gdb_target=tahoe ;;
+
+
+vax-*-*)		gdb_target=vax ;;
+
+fr30-*-*)		gdb_target=fr30
+			;;
+
+v850*-*-*)		gdb_target=v850
+			;;
+
+w65-*-*)		gdb_target=w65 ;;
+
+z8k-*-coff*)		gdb_target=z8k ;;
+
+esac
diff --git a/gdb/convex-tdep.c b/gdb/convex-tdep.c
new file mode 100644
index 0000000..8eeb2b3
--- /dev/null
+++ b/gdb/convex-tdep.c
@@ -0,0 +1,1217 @@
+/* Convex stuff for GDB.
+   Copyright (C) 1990, 1991, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "command.h"
+#include "symtab.h"
+#include "value.h"
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+
+#include <signal.h>
+#include <fcntl.h>
+
+#include "gdbcore.h"
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <sys/ioctl.h>
+#include <sys/pcntl.h>
+#include <sys/thread.h>
+#include <sys/proc.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/mman.h>
+
+#include "gdbcmd.h"
+
+exec_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  int n;
+  struct stat st_exec;
+
+  /* Eliminate all traces of old exec file.
+     Mark text segment as empty.  */
+
+  if (execfile)
+    free (execfile);
+  execfile = 0;
+  data_start = 0;
+  data_end = 0;
+  text_start = 0;
+  text_end = 0;
+  exec_data_start = 0;
+  exec_data_end = 0;
+  if (execchan >= 0)
+    close (execchan);
+  execchan = -1;
+
+  n_exec = 0;
+
+  /* Now open and digest the file the user requested, if any.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      execchan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
+			&execfile);
+      if (execchan < 0)
+	perror_with_name (filename);
+
+      if (myread (execchan, &filehdr, sizeof filehdr) < 0)
+	perror_with_name (filename);
+
+      if (! IS_SOFF_MAGIC (filehdr.h_magic))
+	error ("%s: not an executable file.", filename);
+
+      if (myread (execchan, &opthdr, filehdr.h_opthdr) <= 0)
+	perror_with_name (filename);
+
+      /* Read through the section headers.
+	 For text, data, etc, record an entry in the exec file map.
+	 Record text_start and text_end.  */
+
+      lseek (execchan, (long) filehdr.h_scnptr, 0);
+
+      for (n = 0; n < filehdr.h_nscns; n++)
+	{
+	  if (myread (execchan, &scnhdr, sizeof scnhdr) < 0)
+	    perror_with_name (filename);
+
+	  if ((scnhdr.s_flags & S_TYPMASK) >= S_TEXT
+	      && (scnhdr.s_flags & S_TYPMASK) <= S_COMON)
+	    {
+	      exec_map[n_exec].mem_addr = scnhdr.s_vaddr;
+	      exec_map[n_exec].mem_end = scnhdr.s_vaddr + scnhdr.s_size;
+	      exec_map[n_exec].file_addr = scnhdr.s_scnptr;
+	      exec_map[n_exec].type = scnhdr.s_flags & S_TYPMASK;
+	      n_exec++;
+
+	      if ((scnhdr.s_flags & S_TYPMASK) == S_TEXT)
+		{
+		  text_start = scnhdr.s_vaddr;
+		  text_end =  scnhdr.s_vaddr + scnhdr.s_size;
+		}
+	    }
+	}
+
+      fstat (execchan, &st_exec);
+      exec_mtime = st_exec.st_mtime;
+      
+      validate_files ();
+    }
+  else if (from_tty)
+    printf_filtered ("No executable file now.\n");
+
+  /* Tell display code (if any) about the changed file name.  */
+  if (exec_file_display_hook)
+    (*exec_file_display_hook) (filename);
+}
+
+#if 0
+/* Read data from SOFF exec or core file.
+   Return 0 on success, EIO if address out of bounds. */
+
+int
+xfer_core_file (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  register int n;
+  register int val;
+  int xferchan;
+  char **xferfile;
+  int fileptr;
+  int returnval = 0;
+
+  while (len > 0)
+    {
+      xferfile = 0;
+      xferchan = 0;
+
+      /* Determine which file the next bunch of addresses reside in,
+	 and where in the file.  Set the file's read/write pointer
+	 to point at the proper place for the desired address
+	 and set xferfile and xferchan for the correct file.
+	 If desired address is nonexistent, leave them zero.
+	 i is set to the number of bytes that can be handled
+	 along with the next address.  */
+
+      i = len;
+
+      for (n = 0; n < n_core; n++)
+	{
+	  if (memaddr >= core_map[n].mem_addr && memaddr < core_map[n].mem_end
+	      && (core_map[n].thread == -1
+		  || core_map[n].thread == inferior_thread))
+	    {
+	      i = min (len, core_map[n].mem_end - memaddr);
+	      fileptr = core_map[n].file_addr + memaddr - core_map[n].mem_addr;
+	      if (core_map[n].file_addr)
+		{
+		  xferfile = &corefile;
+		  xferchan = corechan;
+		}
+	      break;
+	    }
+	  else if (core_map[n].mem_addr >= memaddr
+		   && core_map[n].mem_addr < memaddr + i)
+ 	    i = core_map[n].mem_addr - memaddr;
+        }
+
+      if (!xferfile) 
+	for (n = 0; n < n_exec; n++)
+	  {
+	    if (memaddr >= exec_map[n].mem_addr
+		&& memaddr < exec_map[n].mem_end)
+	      {
+		i = min (len, exec_map[n].mem_end - memaddr);
+		fileptr = exec_map[n].file_addr + memaddr
+		  - exec_map[n].mem_addr;
+		if (exec_map[n].file_addr)
+		  {
+		    xferfile = &execfile;
+		    xferchan = execchan;
+		  }
+		break;
+	      }
+	    else if (exec_map[n].mem_addr >= memaddr
+		     && exec_map[n].mem_addr < memaddr + i)
+	      i = exec_map[n].mem_addr - memaddr;
+	  }
+
+      /* Now we know which file to use.
+	 Set up its pointer and transfer the data.  */
+      if (xferfile)
+	{
+	  if (*xferfile == 0)
+	    if (xferfile == &execfile)
+	      error ("No program file to examine.");
+	    else
+	      error ("No core dump file or running program to examine.");
+	  val = lseek (xferchan, fileptr, 0);
+	  if (val < 0)
+	    perror_with_name (*xferfile);
+	  val = myread (xferchan, myaddr, i);
+	  if (val < 0)
+	    perror_with_name (*xferfile);
+	}
+      /* If this address is for nonexistent memory,
+	 read zeros if reading, or do nothing if writing.  */
+      else
+	{
+	  memset (myaddr, '\0', i);
+	  returnval = EIO;
+	}
+
+      memaddr += i;
+      myaddr += i;
+      len -= i;
+    }
+  return returnval;
+}
+#endif
+
+/* Here from info files command to print an address map.  */
+
+print_maps ()
+{
+  struct pmap ptrs[200];
+  int n;
+
+  /* ID strings for core and executable file sections */
+
+  static char *idstr[] =
+    {
+      "0", "text", "data", "tdata", "bss", "tbss", 
+      "common", "ttext", "ctx", "tctx", "10", "11", "12",
+    };
+
+  for (n = 0; n < n_core; n++)
+    {
+      core_map[n].which = 0;
+      ptrs[n] = core_map[n];
+    }
+  for (n = 0; n < n_exec; n++)
+    {
+      exec_map[n].which = 1;
+      ptrs[n_core+n] = exec_map[n];
+    }
+
+  qsort (ptrs, n_core + n_exec, sizeof *ptrs, ptr_cmp);
+
+  for (n = 0; n < n_core + n_exec; n++)
+    {
+      struct pmap *p = &ptrs[n];
+      if (n > 0)
+	{
+	  if (p->mem_addr < ptrs[n-1].mem_end)
+	    p->mem_addr = ptrs[n-1].mem_end;
+	  if (p->mem_addr >= p->mem_end)
+	    continue;
+	}
+      printf_filtered ("%08x .. %08x  %-6s  %s\n",
+		       p->mem_addr, p->mem_end, idstr[p->type],
+		       p->which ? execfile : corefile);
+    }
+}
+
+/* Compare routine to put file sections in order.
+   Sort into increasing order on address, and put core file sections
+   before exec file sections if both files contain the same addresses.  */
+
+static ptr_cmp (a, b)
+     struct pmap *a, *b;
+{
+  if (a->mem_addr != b->mem_addr) return a->mem_addr - b->mem_addr;
+  return a->which - b->which;
+}
+
+/* Trapped internal variables are used to handle special registers.
+   A trapped i.v. calls a hook here every time it is dereferenced,
+   to provide a new value for the variable, and it calls a hook here
+   when a new value is assigned, to do something with the value.
+   
+   The vector registers are $vl, $vs, $vm, $vN, $VN (N in 0..7).
+   The communication registers are $cN, $CN (N in 0..63).
+   They not handled as regular registers because it's expensive to
+   read them, and their size varies, and they have too many names.  */
+
+
+/* Return 1 if NAME is a trapped internal variable, else 0. */
+
+int
+is_trapped_internalvar (name)
+     char *name;
+{
+    if ((name[0] == 'c' || name[0] == 'C')
+	&& name[1] >= '0' && name[1] <= '9'
+	&& (name[2] == '\0'
+	    || (name[2] >= '0' && name[2] <= '9'
+		&& name[3] == '\0' && name[1] != '0'))
+	&& atoi (&name[1]) < 64) return 1;
+
+  if ((name[0] == 'v' || name[0] == 'V')
+      && (((name[1] & -8) == '0' && name[2] == '\0')
+	  || STREQ (name, "vl")
+	  || STREQ (name, "vs") 
+	  || STREQ (name, "vm")))
+    return 1;
+  else return 0;
+}
+
+/* Return the value of trapped internal variable VAR */
+
+value
+value_of_trapped_internalvar (var)
+     struct internalvar *var;
+{
+  char *name = var->name;
+  value val;
+  struct type *type;
+  struct type *range_type;
+  long len = *read_vector_register (VL_REGNUM);
+  if (len <= 0 || len > 128) len = 128;
+
+  if (STREQ (name, "vl"))
+    {
+      val = value_from_longest (builtin_type_int,
+			     (LONGEST) *read_vector_register_1 (VL_REGNUM));
+    }
+  else if (STREQ (name, "vs"))
+    {
+      val = value_from_longest (builtin_type_int,
+			     (LONGEST) *read_vector_register_1 (VS_REGNUM));
+    }
+  else if (STREQ (name, "vm"))
+    {
+      long vm[4];
+      long i, *p;
+      memcpy (vm, read_vector_register_1 (VM_REGNUM), sizeof vm);
+      range_type =
+	create_range_type ((struct type *) NULL, builtin_type_int, 0, len - 1);
+      type =
+	create_array_type ((struct type *) NULL, builtin_type_int, range_type);
+      val = allocate_value (type);
+      p = (long *) VALUE_CONTENTS (val);
+      for (i = 0; i < len; i++) 
+	*p++ = !! (vm[3 - (i >> 5)] & (1 << (i & 037)));
+    }
+  else if (name[0] == 'V')
+    {
+      range_type =
+	create_range_type ((struct type *) NULL, builtin_type_int 0, len - 1);
+      type =
+	create_array_type ((struct type *) NULL, builtin_type_long_long,
+			   range_type);
+      val = allocate_value (type);
+      memcpy (VALUE_CONTENTS (val),
+	     read_vector_register_1 (name[1] - '0'),
+	     TYPE_LENGTH (type));
+    }
+  else if (name[0] == 'v')
+    {
+      long *p1, *p2;
+      range_type =
+	create_range_type ((struct type *) NULL, builtin_type_int 0, len - 1);
+      type =
+	create_array_type ((struct type *) NULL, builtin_type_long,
+			   range_type);
+      val = allocate_value (type);
+      p1 = read_vector_register_1 (name[1] - '0');
+      p2 = (long *) VALUE_CONTENTS (val);
+      while (--len >= 0) {p1++; *p2++ = *p1++;}
+    }
+
+  else if (name[0] == 'c')
+    val = value_from_longest (builtin_type_int,
+			   read_comm_register (atoi (&name[1])));
+  else if (name[0] == 'C')
+    val = value_from_longest (builtin_type_long_long,
+			   read_comm_register (atoi (&name[1])));
+
+  VALUE_LVAL (val) = lval_internalvar;
+  VALUE_INTERNALVAR (val) = var;
+  return val;
+}
+
+/* Handle a new value assigned to a trapped internal variable */
+
+void
+set_trapped_internalvar (var, val, bitpos, bitsize, offset)
+     struct internalvar *var;
+     value val;
+     int bitpos, bitsize, offset;
+{ 
+  char *name = var->name;
+  long long newval = value_as_long (val);
+
+  if (STREQ (name, "vl")) 
+    write_vector_register (VL_REGNUM, 0, newval);
+  else if (STREQ (name, "vs"))
+    write_vector_register (VS_REGNUM, 0, newval);
+  else if (name[0] == 'c' || name[0] == 'C')
+    write_comm_register (atoi (&name[1]), newval);
+  else if (STREQ (name, "vm"))
+    error ("can't assign to $vm");
+  else
+    {
+      offset /= bitsize / 8;
+      write_vector_register (name[1] - '0', offset, newval);
+    }
+}
+
+/* Print an integer value when no format was specified.  gdb normally
+   prints these values in decimal, but the the leading 0x80000000 of
+   pointers produces intolerable 10-digit negative numbers.
+   If it looks like an address, print it in hex instead.  */
+
+decout (stream, type, val)
+     GDB_FILE *stream;
+     struct type *type;
+     LONGEST val;
+{
+  long lv = val;
+
+  switch (output_radix)
+    {
+    case 0:
+      if ((lv == val || (unsigned) lv == val)
+	  && ((lv & 0xf0000000) == 0x80000000
+	      || ((lv & 0xf0000000) == 0xf0000000 && lv < STACK_END_ADDR)))
+	{
+	  print_longest (stream, "x", 0, val);
+	  return;
+	}
+
+    case 10:
+      print_longest (stream, TYPE_UNSIGNED (type) ? "u" : "d", 0, val);
+      return;
+
+    case 8:
+      print_longest (stream, "o", 0, val);
+      return;
+
+    case 16:
+      print_longest (stream, "x", 0, val);
+      return;
+    }
+}
+
+/* Change the default output radix to 10 or 16, or set it to 0 (heuristic).
+   This command is mostly obsolete now that the print command allows
+   formats to apply to aggregates, but is still handy occasionally.  */
+
+static void
+set_base_command (arg)
+    char *arg;
+{
+  int new_radix;
+
+  if (!arg)
+    output_radix = 0;
+  else
+    {
+      new_radix = atoi (arg);
+      if (new_radix != 10 && new_radix != 16 && new_radix != 8) 
+	error ("base must be 8, 10 or 16, or null");
+      else output_radix = new_radix;
+    }
+}
+
+/* Turn pipelining on or off in the inferior. */
+
+static void
+set_pipelining_command (arg)
+    char *arg;
+{
+  if (!arg)
+    {
+      sequential = !sequential;
+      printf_filtered ("%s\n", sequential ? "off" : "on");
+    }
+  else if (STREQ (arg, "on"))
+    sequential = 0;
+  else if (STREQ (arg, "off"))
+    sequential = 1;
+  else error ("valid args are `on', to allow instructions to overlap, or\n\
+`off', to prevent it and thereby pinpoint exceptions.");
+}
+
+/* Enable, disable, or force parallel execution in the inferior.  */
+
+static void
+set_parallel_command (arg)
+     char *arg;
+{
+  struct rlimit rl;
+  int prevparallel = parallel;
+
+  if (!strncmp (arg, "fixed", strlen (arg)))
+    parallel = 2;  
+  else if (STREQ (arg, "on"))
+    parallel = 1;
+  else if (STREQ (arg, "off"))
+    parallel = 0;
+  else error ("valid args are `on', to allow multiple threads, or\n\
+`fixed', to force multiple threads, or\n\
+`off', to run with one thread only.");
+
+  if ((prevparallel == 0) != (parallel == 0) && inferior_pid)
+    printf_filtered ("will take effect at next run.\n");
+
+  getrlimit (RLIMIT_CONCUR, &rl);
+  rl.rlim_cur = parallel ? rl.rlim_max : 1;
+  setrlimit (RLIMIT_CONCUR, &rl);
+
+  if (inferior_pid)
+    set_fixed_scheduling (inferior_pid, parallel == 2);
+}
+
+/* Add a new name for an existing command.  */
+
+static void 
+alias_command (arg)
+    char *arg;
+{
+    static char *aliaserr = "usage is `alias NEW OLD', no args allowed";
+    char *newname = arg;
+    struct cmd_list_element *new, *old;
+
+    if (!arg)
+      error_no_arg ("newname oldname");
+	
+    new = lookup_cmd (&arg, cmdlist, "", -1);
+    if (new && !strncmp (newname, new->name, strlen (new->name)))
+      {
+	newname = new->name;
+	if (!(*arg == '-' 
+	      || (*arg >= 'a' && *arg <= 'z')
+	      || (*arg >= 'A' && *arg <= 'Z')
+	      || (*arg >= '0' && *arg <= '9')))
+	  error (aliaserr);
+      }
+    else
+      {
+	arg = newname;
+	while (*arg == '-' 
+	       || (*arg >= 'a' && *arg <= 'z')
+	       || (*arg >= 'A' && *arg <= 'Z')
+	       || (*arg >= '0' && *arg <= '9'))
+	  arg++;
+	if (*arg != ' ' && *arg != '\t')
+	  error (aliaserr);
+	*arg = '\0';
+	arg++;
+      }
+
+    old = lookup_cmd (&arg, cmdlist, "", 0);
+
+    if (*arg != '\0')
+      error (aliaserr);
+
+    if (new && !strncmp (newname, new->name, strlen (new->name)))
+      {
+	char *tem;
+	if (new->class == (int) class_user || new->class == (int) class_alias)
+	  tem = "Redefine command \"%s\"? ";
+	else
+	  tem = "Really redefine built-in command \"%s\"? ";
+	if (!query (tem, new->name))
+	  error ("Command \"%s\" not redefined.", new->name);
+      }
+
+    add_com (newname, class_alias, old->function, old->doc);
+}
+
+
+
+/* Print the current thread number, and any threads with signals in the
+   queue.  */
+
+thread_info ()
+{
+  struct threadpid *p;
+
+  if (have_inferior_p ())
+    {
+      ps.pi_buffer = (char *) &comm_registers;
+      ps.pi_nbytes = sizeof comm_registers;
+      ps.pi_offset = 0;
+      ps.pi_thread = inferior_thread;
+      ioctl (inferior_fd, PIXRDCREGS, &ps);
+    }
+
+  /* FIXME: stop_signal is from target.h but stop_sigcode is a
+     convex-specific thing.  */
+  printf_filtered ("Current thread %d stopped with signal %d.%d (%s).\n",
+		   inferior_thread, stop_signal, stop_sigcode,
+		   subsig_name (stop_signal, stop_sigcode));
+  
+  for (p = signal_stack; p->pid; p--)
+    printf_filtered ("Thread %d stopped with signal %d.%d (%s).\n",
+		     p->thread, p->signo, p->subsig,
+		     subsig_name (p->signo, p->subsig));
+		
+  if (iscrlbit (comm_registers.crctl.lbits.cc, 64+13))
+    printf_filtered ("New thread start pc %#x\n",
+		     (long) (comm_registers.crreg.pcpsw >> 32));
+}
+
+/* Return string describing a signal.subcode number */
+
+static char *
+subsig_name (signo, subcode)
+     int signo, subcode;
+{
+  static char *subsig4[] = {
+    "error exit", "privileged instruction", "unknown",
+    "unknown", "undefined opcode",
+    0};
+  static char *subsig5[] = {0,
+    "breakpoint", "single step", "fork trap", "exec trap", "pfork trap",
+    "join trap", "idle trap", "last thread", "wfork trap",
+    "process breakpoint", "trap instruction",
+    0};
+  static char *subsig8[] = {0,
+    "int overflow", "int divide check", "float overflow",
+    "float divide check", "float underflow", "reserved operand",
+    "sqrt error", "exp error", "ln error", "sin error", "cos error",
+    0};
+  static char *subsig10[] = {0,
+    "invalid inward ring address", "invalid outward ring call",
+    "invalid inward ring return", "invalid syscall gate",
+    "invalid rtn frame length", "invalid comm reg address",
+    "invalid trap gate",
+    0};
+  static char *subsig11[] = {0,
+    "read access denied", "write access denied", "execute access denied",
+    "segment descriptor fault", "page table fault", "data reference fault",
+    "i/o access denied", "levt pte invalid",
+    0};
+
+  static char **subsig_list[] = 
+    {0, 0, 0, 0, subsig4, subsig5, 0, 0, subsig8, 0, subsig10, subsig11, 0};
+
+  int i;
+  char *p;
+
+  if ((p = strsignal (signo)) == NULL)
+    p = "unknown";
+  if (signo >= (sizeof subsig_list / sizeof *subsig_list)
+      || !subsig_list[signo])
+    return p;
+  for (i = 1; subsig_list[signo][i]; i++)
+    if (i == subcode)
+      return subsig_list[signo][subcode];
+  return p;
+}
+
+
+/* Print a compact display of thread status, essentially x/i $pc
+   for all active threads.  */
+
+static void
+threadstat ()
+{
+  int t;
+
+  for (t = 0; t < n_threads; t++)
+    if (thread_state[t] == PI_TALIVE)
+      {
+	printf_filtered ("%d%c %08x%c %d.%d ", t,
+			 (t == inferior_thread ? '*' : ' '), thread_pc[t],
+			 (thread_is_in_kernel[t] ? '#' : ' '),
+			 thread_signal[t], thread_sigcode[t]);
+	print_insn (thread_pc[t], stdout);
+	printf_filtered ("\n");
+      }
+}
+
+/* Change the current thread to ARG.  */
+
+set_thread_command (arg)
+     char *arg;
+{
+    int thread;
+
+    if (!arg)
+      {
+	threadstat ();
+	return;
+      }
+
+    thread = parse_and_eval_address (arg);
+
+    if (thread < 0 || thread > n_threads || thread_state[thread] != PI_TALIVE)
+      error ("no such thread.");
+
+    select_thread (thread);
+
+    stop_pc = read_pc ();
+    flush_cached_frames ();
+    select_frame (get_current_frame (), 0);
+    print_stack_frame (selected_frame, selected_frame_level, -1);
+}
+
+/* Here on CONT command; gdb's dispatch address is changed to come here.
+   Set global variable ALL_CONTINUE to tell resume() that it should
+   start up all threads, and that a thread switch will not blow gdb's
+   mind.  */
+
+static void
+convex_cont_command (proc_count_exp, from_tty)
+     char *proc_count_exp;
+     int from_tty;
+{
+  all_continue = 1;
+  cont_command (proc_count_exp, from_tty);
+}
+
+/* Here on 1CONT command.  Resume only the current thread.  */
+
+one_cont_command (proc_count_exp, from_tty)
+     char *proc_count_exp;
+     int from_tty;
+{
+  cont_command (proc_count_exp, from_tty);
+}
+
+/* Print the contents and lock bits of all communication registers,
+   or just register ARG if ARG is a communication register,
+   or the 3-word resource structure in memory at address ARG.  */
+
+comm_registers_info (arg)
+    char *arg;
+{
+  int i, regnum;
+
+  if (arg)
+    {
+             if (sscanf (arg, "$c%d", &regnum) == 1) {
+	;
+      } else if (sscanf (arg, "$C%d", &regnum) == 1) {
+	;
+      } else {
+	regnum = parse_and_eval_address (arg);
+	if (regnum > 0)
+	  regnum &= ~0x8000;
+      }
+
+      if (regnum >= 64)
+	error ("%s: invalid register name.", arg);
+
+      /* if we got a (user) address, examine the resource struct there */
+
+      if (regnum < 0)
+	{
+	  static int buf[3];
+	  read_memory (regnum, buf, sizeof buf);
+	  printf_filtered ("%08x  %08x%08x%s\n", regnum, buf[1], buf[2],
+			   buf[0] & 0xff ? " locked" : "");
+	  return;
+	}
+    }
+
+  ps.pi_buffer = (char *) &comm_registers;
+  ps.pi_nbytes = sizeof comm_registers;
+  ps.pi_offset = 0;
+  ps.pi_thread = inferior_thread;
+  ioctl (inferior_fd, PIXRDCREGS, &ps);
+
+  for (i = 0; i < 64; i++)
+    if (!arg || i == regnum)
+      printf_filtered ("%2d 0x8%03x %016llx%s\n", i, i,
+		       comm_registers.crreg.r4[i],
+		       (iscrlbit (comm_registers.crctl.lbits.cc, i)
+			? " locked" : ""));
+}
+
+/* Print the psw */
+
+static void 
+psw_info (arg)
+    char *arg;
+{
+  struct pswbit
+    {
+      int bit;
+      int pos;
+      char *text;
+    };
+
+  static struct pswbit pswbit[] =
+    {
+      { 0x80000000, -1, "A carry" }, 
+      { 0x40000000, -1, "A integer overflow" }, 
+      { 0x20000000, -1, "A zero divide" }, 
+      { 0x10000000, -1, "Integer overflow enable" }, 
+      { 0x08000000, -1, "Trace" }, 
+      { 0x06000000, 25, "Frame length" }, 
+      { 0x01000000, -1, "Sequential" }, 
+      { 0x00800000, -1, "S carry" }, 
+      { 0x00400000, -1, "S integer overflow" }, 
+      { 0x00200000, -1, "S zero divide" }, 
+      { 0x00100000, -1, "Zero divide enable" }, 
+      { 0x00080000, -1, "Floating underflow" }, 
+      { 0x00040000, -1, "Floating overflow" }, 
+      { 0x00020000, -1, "Floating reserved operand" }, 
+      { 0x00010000, -1, "Floating zero divide" }, 
+      { 0x00008000, -1, "Floating error enable" }, 
+      { 0x00004000, -1, "Floating underflow enable" }, 
+      { 0x00002000, -1, "IEEE" }, 
+      { 0x00001000, -1, "Sequential stores" }, 
+      { 0x00000800, -1, "Intrinsic error" }, 
+      { 0x00000400, -1, "Intrinsic error enable" }, 
+      { 0x00000200, -1, "Trace thread creates" }, 
+      { 0x00000100, -1, "Thread init trap" }, 
+      { 0x000000e0,  5, "Reserved" },
+      { 0x0000001f,  0, "Intrinsic error code" },
+      {0, 0, 0},
+    };
+
+  long psw;
+  struct pswbit *p;
+
+  if (arg)
+    psw = parse_and_eval_address (arg);
+  else
+    psw = read_register (PS_REGNUM);
+
+  for (p = pswbit; p->bit; p++)
+    {
+      if (p->pos < 0)
+	printf_filtered ("%08x  %s  %s\n", p->bit,
+			 (psw & p->bit) ? "yes" : "no ", p->text);
+      else
+	printf_filtered ("%08x %3d   %s\n", p->bit,
+			 (psw & p->bit) >> p->pos, p->text);
+    }
+}
+
+#include "symtab.h"
+
+/* reg (fmt_field, inst_field) --
+   the {first,second,third} operand of instruction as fmt_field = [ijk]
+   gets the value of the field from the [ijk] position of the instruction */
+
+#define reg(a,b) ((char (*)[3])(op[fmt->a]))[inst.f0.b]
+
+/* lit (fmt_field) -- field [ijk] is a literal (PSW, VL, eg) */
+
+#define lit(i) op[fmt->i]
+
+/* aj[j] -- name for A register j */
+
+#define aj ((char (*)[3])(op[A]))
+
+union inst {
+    struct {
+	unsigned   : 7;
+	unsigned i : 3;
+	unsigned j : 3;
+	unsigned k : 3;
+	unsigned   : 16;
+	unsigned   : 32;
+    } f0;
+    struct {
+	unsigned   : 8;
+	unsigned indir : 1;
+	unsigned len : 1;
+	unsigned j : 3;
+	unsigned k : 3;
+	unsigned   : 16;
+	unsigned   : 32;
+    } f1;
+    unsigned char byte[8];
+    unsigned short half[4];
+    char signed_byte[8];
+    short signed_half[4];
+};
+
+struct opform {
+    int mask;			/* opcode mask */
+    int shift;			/* opcode align */
+    struct formstr *formstr[3];	/* ST, E0, E1 */
+};
+
+struct formstr {
+    unsigned lop:8, rop:5;	/* opcode */
+    unsigned fmt:5;		/* inst format */
+    unsigned i:5, j:5, k:2;	/* operand formats */
+};
+
+#include "opcode/convex.h"
+
+CONST unsigned char formdecode [] = {
+    1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+    9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,9,
+    1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+    1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
+    2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+    2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,
+    3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,
+    4,4,4,4,4,4,4,4,5,5,5,5,6,6,7,8,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+    0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+};
+
+CONST struct opform opdecode[] = {
+    0x7e00, 9, format0, e0_format0, e1_format0,
+    0x3f00, 8, format1, e0_format1, e1_format1,
+    0x1fc0, 6, format2, e0_format2, e1_format2,
+    0x0fc0, 6, format3, e0_format3, e1_format3,
+    0x0700, 8, format4, e0_format4, e1_format4,
+    0x03c0, 6, format5, e0_format5, e1_format5,
+    0x01f8, 3, format6, e0_format6, e1_format6,
+    0x00f8, 3, format7, e0_format7, e1_format7,
+    0x0000, 0, formatx, formatx, formatx,
+    0x0f80, 7, formatx, formatx, formatx,
+    0x0f80, 7, formatx, formatx, formatx,
+};
+
+/* Print the instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+int
+convex_print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     FILE *stream;
+{
+  union inst inst;
+  struct formstr *fmt;
+  register int format, op1, pfx;
+  int l;
+
+  read_memory (memaddr, &inst, sizeof inst);
+
+  /* Remove and note prefix, if present */
+    
+  pfx = inst.half[0];
+  if ((pfx & 0xfff0) == 0x7ef0)
+    {
+      pfx = ((pfx >> 3) & 1) + 1;
+      *(long long *) &inst = *(long long *) &inst.half[1];
+    }
+  else pfx = 0;
+
+  /* Split opcode into format.op1 and look up in appropriate table */
+
+  format = formdecode[inst.byte[0]];
+  op1 = (inst.half[0] & opdecode[format].mask) >> opdecode[format].shift;
+  if (format == 9)
+    {
+      if (pfx)
+	fmt = formatx;
+      else if (inst.f1.j == 0)
+	fmt = &format1a[op1];
+      else if (inst.f1.j == 1)
+	fmt = &format1b[op1];
+      else
+	fmt = formatx;
+    }
+  else
+    fmt = &opdecode[format].formstr[pfx][op1];
+
+  /* Print it */
+
+  if (fmt->fmt == xxx)
+    {
+      /* noninstruction */
+      fprintf (stream, "0x%04x", pfx ? pfx : inst.half[0]);
+      return 2;
+    }
+
+  if (pfx)
+    pfx = 2;
+
+  fprintf (stream, "%s%s%s", lop[fmt->lop], rop[fmt->rop],
+	   &"        "[strlen(lop[fmt->lop]) + strlen(rop[fmt->rop])]);
+
+  switch (fmt->fmt)
+    {
+    case rrr:			/* three register */
+      fprintf (stream, "%s,%s,%s", reg(i,i), reg(j,j), reg(k,k));
+      return pfx + 2;
+
+    case rr:			/* two register */
+      fprintf (stream, "%s,%s", reg(i,j), reg(j,k));
+      return pfx + 2;
+
+    case rxr:			/* two register, reversed i and j fields */
+      fprintf (stream, "%s,%s", reg(i,k), reg(j,j));
+      return pfx + 2;
+
+    case r:			/* one register */
+      fprintf (stream, "%s", reg(i,k));
+      return pfx + 2;
+
+    case nops:			/* no operands */
+      return pfx + 2;
+
+    case nr:			/* short immediate, one register */
+      fprintf (stream, "#%d,%s", inst.f0.j, reg(i,k));
+      return pfx + 2;
+
+    case pcrel:			/* pc relative */
+      print_address (memaddr + 2 * inst.signed_byte[1], stream);
+      return pfx + 2;
+
+    case lr:			/* literal, one register */
+      fprintf (stream, "%s,%s", lit(i), reg(j,k));
+      return pfx + 2;
+
+    case rxl:			/* one register, literal */
+      fprintf (stream, "%s,%s", reg(i,k), lit(j));
+      return pfx + 2;
+
+    case rlr:			/* register, literal, register */
+      fprintf (stream, "%s,%s,%s", reg(i,j), lit(j), reg(k,k));
+      return pfx + 2;
+
+    case rrl:			/* register, register, literal */
+      fprintf (stream, "%s,%s,%s", reg(i,j), reg(j,k), lit(k));
+      return pfx + 2;
+
+    case iml:			/* immediate, literal */
+      if (inst.f1.len)
+	{
+	  fprintf (stream, "#%#x,%s",
+		   (inst.signed_half[1] << 16) + inst.half[2], lit(i));
+	  return pfx + 6;
+	}
+      else
+	{
+	  fprintf (stream, "#%d,%s", inst.signed_half[1], lit(i));
+	  return pfx + 4;
+	}
+
+    case imr:			/* immediate, register */
+      if (inst.f1.len)
+	{
+	  fprintf (stream, "#%#x,%s",
+		   (inst.signed_half[1] << 16) + inst.half[2], reg(i,k));
+	  return pfx + 6;
+	}
+      else
+	{
+	  fprintf (stream, "#%d,%s", inst.signed_half[1], reg(i,k));
+	  return pfx + 4;
+	}
+
+    case a1r:			/* memory, register */
+      l = print_effa (inst, stream);
+      fprintf (stream, ",%s", reg(i,k));
+      return pfx + l;
+
+    case a1l:			/* memory, literal  */
+      l = print_effa (inst, stream);
+      fprintf (stream, ",%s", lit(i));
+      return pfx + l;
+
+    case a2r:			/* register, memory */
+      fprintf (stream, "%s,", reg(i,k));
+      return pfx + print_effa (inst, stream);
+
+    case a2l:			/* literal, memory */
+      fprintf (stream, "%s,", lit(i));
+      return pfx + print_effa (inst, stream);
+
+    case a3:			/* memory */
+      return pfx + print_effa (inst, stream);
+
+    case a4:			/* system call */
+      l = 29; goto a4a5;
+    case a5:			/* trap */
+      l = 27;
+    a4a5:
+      if (inst.f1.len)
+	{
+	  unsigned int m = (inst.signed_half[1] << 16) + inst.half[2];
+	  fprintf (stream, "#%d,#%d", m >> l, m & (-1 >> (32-l)));
+	  return pfx + 6;
+	}
+      else
+	{
+	  unsigned int m = inst.signed_half[1];
+	  fprintf (stream, "#%d,#%d", m >> l, m & (-1 >> (32-l)));
+	  return pfx + 4;
+	}
+    }
+}
+
+
+/* print effective address @nnn(aj), return instruction length */
+
+int print_effa (inst, stream)
+     union inst inst;
+     FILE *stream;
+{
+  int n, l;
+
+  if (inst.f1.len)
+    {
+      n = (inst.signed_half[1] << 16) + inst.half[2];
+      l = 6;
+    }
+  else
+    {
+      n = inst.signed_half[1];
+      l = 4;
+    }
+	
+  if (inst.f1.indir)
+    printf ("@");
+
+  if (!inst.f1.j)
+    {
+      print_address (n, stream);
+      return l;
+    }
+
+  fprintf (stream, (n & 0xf0000000) == 0x80000000 ? "%#x(%s)" : "%d(%s)",
+	   n, aj[inst.f1.j]);
+
+  return l;
+}
+
+
+void
+_initialize_convex_dep ()
+{
+  add_com ("alias", class_support, alias_command,
+	   "Add a new name for an existing command.");
+
+  add_cmd ("base", class_vars, set_base_command,
+	   "Change the integer output radix to 8, 10 or 16\n\
+or use just `set base' with no args to return to the ad-hoc default,\n\
+which is 16 for integers that look like addresses, 10 otherwise.",
+	   &setlist);
+
+  add_cmd ("pipeline", class_run, set_pipelining_command,
+	   "Enable or disable overlapped execution of instructions.\n\
+With `set pipe off', exceptions are reported with\n\
+$pc pointing at the instruction after the faulting one.\n\
+The default is `set pipe on', which runs faster.",
+	   &setlist);
+
+  add_cmd ("parallel", class_run, set_parallel_command,
+	   "Enable or disable multi-threaded execution of parallel code.\n\
+`set parallel off' means run the program on a single CPU.\n\
+`set parallel fixed' means run the program with all CPUs assigned to it.\n\
+`set parallel on' means run the program on any CPUs that are available.",
+	   &setlist);
+
+  add_com ("1cont", class_run, one_cont_command,
+	   "Continue the program, activating only the current thread.\n\
+Args are the same as the `cont' command.");
+
+  add_com ("thread", class_run, set_thread_command,
+	   "Change the current thread, the one under scrutiny and control.\n\
+With no arg, show the active threads, the current one marked with *.");
+
+  add_info ("threads", thread_info,
+	    "List status of active threads.");
+
+  add_info ("comm-registers", comm_registers_info,
+	    "List communication registers and their contents.\n\
+A communication register name as argument means describe only that register.\n\
+An address as argument means describe the resource structure at that address.\n\
+`Locked' means that the register has been sent to but not yet received from.");
+
+  add_info ("psw", psw_info, 
+	    "Display $ps, the processor status word, bit by bit.\n\
+An argument means display that value's interpretation as a psw.");
+
+  add_cmd ("convex", no_class, 0, "Convex-specific commands.\n\
+32-bit registers  $pc $ps $sp $ap $fp $a1-5 $s0-7 $v0-7 $vl $vs $vm $c0-63\n\
+64-bit registers  $S0-7 $V0-7 $C0-63\n\
+\n\
+info threads	    display info on stopped threads waiting to signal\n\
+thread		    display list of active threads\n\
+thread N	    select thread N (its registers, stack, memory, etc.)\n\
+step, next, etc     step selected thread only\n\
+1cont		    continue selected thread only\n\
+cont		    continue all threads\n\
+info comm-registers display contents of comm register(s) or a resource struct\n\
+info psw	    display processor status word $ps\n\
+set base N	    change integer radix used by `print' without a format\n\
+set pipeline off    exceptions are precise, $pc points after the faulting insn\n\
+set pipeline on     normal mode, $pc is somewhere ahead of faulting insn\n\
+set parallel off    program runs on a single CPU\n\
+set parallel fixed  all CPUs are assigned to the program\n\
+set parallel on     normal mode, parallel execution on random available CPUs\n\
+",
+	   &cmdlist);
+
+}
diff --git a/gdb/convex-xdep.c b/gdb/convex-xdep.c
new file mode 100644
index 0000000..8bfc0d8
--- /dev/null
+++ b/gdb/convex-xdep.c
@@ -0,0 +1,966 @@
+/* Convex host-dependent code for GDB.
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "command.h"
+#include "symtab.h"
+#include "value.h"
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+
+#include <signal.h>
+#include <fcntl.h>
+#include "gdbcore.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <sys/ioctl.h>
+#include <sys/pcntl.h>
+#include <sys/thread.h>
+#include <sys/proc.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/mman.h>
+
+#include <convex/vmparam.h>
+#include <convex/filehdr.h>
+#include <convex/opthdr.h>
+#include <convex/scnhdr.h>
+#include <convex/core.h>
+
+/* Per-thread data, read from the inferior at each stop and written
+   back at each resume.  */
+
+/* Number of active threads.
+   Tables are valid for thread numbers less than this.  */
+
+static int n_threads;
+
+#define MAXTHREADS 8
+		
+/* Thread state.  The remaining data is valid only if this is PI_TALIVE.  */
+
+static int thread_state[MAXTHREADS];
+
+/* Stop pc, signal, signal subcode */
+
+static int thread_pc[MAXTHREADS];
+static int thread_signal[MAXTHREADS];
+static int thread_sigcode[MAXTHREADS];	
+
+/* Thread registers.
+   If thread is selected, the regs are in registers[] instead.  */
+
+static char thread_regs[MAXTHREADS][REGISTER_BYTES];
+
+/* 1 if the top frame on the thread's stack was a context frame,
+   meaning that the kernel is up to something and we should not
+   touch the thread at all except to resume it.  */
+
+static char thread_is_in_kernel[MAXTHREADS];
+
+/* The currently selected thread's number.  */
+
+static int inferior_thread;
+
+/* Inferior process's file handle and a process control block
+   to feed args to ioctl with.  */
+
+static int inferior_fd;
+static struct pcntl ps;
+
+/* SOFF file headers for exec or core file.  */
+
+static FILEHDR filehdr;
+static OPTHDR opthdr;
+static SCNHDR scnhdr;
+
+/* Address maps constructed from section headers of exec and core files.
+   Defines process address -> file address translation.  */
+
+struct pmap 
+{
+    long mem_addr;		/* process start address */
+    long mem_end;		/* process end+1 address */
+    long file_addr;		/* file start address */
+    long thread;		/* -1 shared; 0,1,... thread-local */
+    long type;			/* S_TEXT S_DATA S_BSS S_TBSS etc */
+    long which;			/* used to sort map for info files */
+};
+
+static int n_exec, n_core;
+static struct pmap exec_map[100];
+static struct pmap core_map[100];
+
+/* Offsets in the core file of core_context and core_tcontext blocks.  */
+
+static int context_offset;
+static int tcontext_offset[MAXTHREADS];
+
+/* Core file control blocks.  */
+
+static struct core_context_v70 c;
+static struct core_tcontext_v70 tc;
+static struct user u;
+static thread_t th;
+static proc_t pr;
+
+/* The registers of the currently selected thread.  */
+
+extern char registers[REGISTER_BYTES];
+
+/* Vector and communication registers from core dump or from inferior.
+   These are read on demand, ie, not normally valid.  */
+
+static struct vecst vector_registers;
+static struct creg_ctx comm_registers;
+
+/* Flag, set on a vanilla CONT command and cleared when the inferior
+   is continued.  */
+
+static int all_continue;
+
+/* Flag, set when the inferior is continued by a vanilla CONT command,
+   cleared if it is continued for any other purpose.  */
+
+static int thread_switch_ok;
+
+/* Stack of signals recieved from threads but not yet delivered to gdb.  */
+
+struct threadpid 
+{
+    int pid;
+    int thread;
+    int signo;
+    int subsig;
+    int pc;
+};
+
+static struct threadpid signal_stack_bot[100];
+static struct threadpid *signal_stack = signal_stack_bot;
+
+/* How to detect empty stack -- bottom frame is all zero.  */
+
+#define signal_stack_is_empty() (signal_stack->pid == 0)
+
+/* Mode controlled by SET PIPE command, controls the psw SEQ bit
+   which forces each instruction to complete before the next one starts.  */
+
+static int sequential = 0;
+
+/* Mode controlled by the SET PARALLEL command.  Values are:
+   0  concurrency limit 1 thread, dynamic scheduling
+   1  no concurrency limit, dynamic scheduling
+   2  no concurrency limit, fixed scheduling  */
+
+static int parallel = 1;
+
+/* Mode controlled by SET BASE command, output radix for unformatted
+   integer typeout, as in argument lists, aggregates, and so on.
+   Zero means guess whether it's an address (hex) or not (decimal).  */
+
+static int output_radix = 0;
+
+/* Signal subcode at last thread stop.  */
+
+static int stop_sigcode;
+
+/* Hack, see wait() below.  */
+
+static int exec_trap_timer;
+
+#include "gdbcmd.h"
+
+static struct type *vector_type ();
+static long *read_vector_register ();
+static long *read_vector_register_1 ();
+static void write_vector_register ();
+static ULONGEST read_comm_register ();
+static void write_comm_register ();
+static void convex_cont_command ();
+static void thread_continue ();
+static void select_thread ();
+static void scan_stack ();
+static void set_fixed_scheduling ();
+static char *subsig_name ();
+static void psw_info ();
+static sig_noop ();
+static ptr_cmp ();
+
+
+/* Execute ptrace.  Convex V7 replaced ptrace with pattach.
+   Allow ptrace (0) as a no-op.  */
+
+int
+call_ptrace (request, pid, procaddr, buf)
+     int request, pid;
+     PTRACE_ARG3_TYPE procaddr;
+     int buf;
+{
+  if (request == 0)
+    return;
+  error ("no ptrace");
+}
+
+/* Replacement for system execle routine.
+   Convert it to an equivalent exect, which pattach insists on.  */
+
+execle (name, argv)
+     char *name, *argv;
+{
+  char ***envp = (char ***) &argv;
+  while (*envp++) ;
+
+  signal (SIGTRAP, sig_noop);
+  exect (name, &argv, *envp);
+}
+
+/* Stupid handler for stupid trace trap that otherwise causes
+   startup to stupidly hang.  */
+
+static sig_noop () 
+{}
+
+/* Read registers from inferior into registers[] array.
+   For convex, they are already there, read in when the inferior stops.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+}
+
+/* Store our register values back into the inferior.
+   For Convex, do this only once, right before resuming inferior.  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+}
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR. 
+   On failure (cannot read from inferior, usually because address is out
+   of bounds) returns the value of errno. */
+
+int
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  errno = 0;
+  while (len > 0)
+    {
+      /* little-known undocumented max request size */
+      int i = (len < 12288) ? len : 12288;
+
+      lseek (inferior_fd, memaddr, 0);
+      read (inferior_fd, myaddr, i);
+
+      memaddr += i;
+      myaddr += i;
+      len -= i;
+    }
+  if (errno) 
+    memset (myaddr, '\0', len);
+  return errno;
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   Returns errno on failure (cannot write the inferior) */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  errno = 0;
+  lseek (inferior_fd, memaddr, 0);
+  write (inferior_fd, myaddr, len);
+  return errno;
+}
+
+/* Here from create_inferior when the inferior process has been created
+   and started up.  We must do a pattach to grab it for debugging.
+
+   Also, intercept the CONT command by altering its dispatch address.  */
+/* FIXME: This used to be called from a macro CREATE_INFERIOR_HOOK.
+   But now init_trace_fun is in the same place.  So re-write this to
+   use the init_trace_fun (making convex a debugging target).  */
+
+create_inferior_hook (pid)
+    int pid;
+{
+  static char cont[] = "cont";
+  static char cont1[] = "c";
+  char *linep = cont;
+  char *linep1 = cont1;
+  char **line = &linep;
+  char **line1 = &linep1;
+  struct cmd_list_element *c;
+
+  c = lookup_cmd (line, cmdlist, "", 0);
+  c->function = convex_cont_command;
+  c = lookup_cmd (line1, cmdlist, "", 0);
+  c->function = convex_cont_command;
+
+  inferior_fd = pattach (pid, O_EXCL);
+  if (inferior_fd < 0)
+    perror_with_name ("pattach");
+  inferior_thread = 0;
+  set_fixed_scheduling (pid, parallel == 2);
+}
+
+/* Attach process PID for debugging.  */
+
+attach (pid)
+    int pid;
+{
+  int fd = pattach (pid, O_EXCL);
+  if (fd < 0)
+    perror_with_name ("pattach");
+  attach_flag = 1;
+  /* wait for strange kernel reverberations to go away */
+  sleep (1);
+
+  setpgrp (pid, pid);
+
+  inferior_fd = fd;
+  inferior_thread = 0;
+  return pid;
+}
+
+/* Stop debugging the process whose number is PID
+   and continue it with signal number SIGNAL.
+   SIGNAL = 0 means just continue it.  */
+
+void
+detach (signal)
+     int signal;
+{
+  signal_stack = signal_stack_bot;
+  thread_continue (-1, 0, signal);
+  ioctl (inferior_fd, PIXDETACH, &ps);
+  close (inferior_fd);
+  inferior_fd = 0;
+  attach_flag = 0;
+}
+
+/* Kill off the inferior process.  */
+
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ioctl (inferior_fd, PIXTERMINATE, 0);
+  wait (0);
+  target_mourn_inferior ();
+}
+
+/* Read vector register REG, and return a pointer to the value.  */
+
+static long *
+read_vector_register (reg)
+    int reg;
+{
+  if (have_inferior_p ())
+    {
+      errno = 0;
+      ps.pi_buffer = (char *) &vector_registers;
+      ps.pi_nbytes = sizeof vector_registers;
+      ps.pi_offset = 0;
+      ps.pi_thread = inferior_thread;
+      ioctl (inferior_fd, PIXRDVREGS, &ps);
+      if (errno)
+	memset (&vector_registers, '\0', sizeof vector_registers);
+    }
+  else if (corechan >= 0)
+    {
+      lseek (corechan, tcontext_offset[inferior_thread], 0);
+      if (myread (corechan, &tc, sizeof tc) < 0)
+	perror_with_name (corefile);
+      lseek (corechan, tc.core_thread_p, 0);
+      if (myread (corechan, &th, sizeof th) < 0)
+	perror_with_name (corefile);
+      lseek (corechan, tc.core_vregs_p, 0);
+      if (myread (corechan, &vector_registers, 16*128) < 0)
+	perror_with_name (corefile);
+      vector_registers.vm[0] = th.t_vect_ctx.vc_vm[0];
+      vector_registers.vm[1] = th.t_vect_ctx.vc_vm[1];
+      vector_registers.vls = th.t_vect_ctx.vc_vls;
+    }
+
+  return read_vector_register_1 (reg);
+}
+
+/* Return a pointer to vector register REG, which must already have been
+   fetched from the inferior or core file.  */
+
+static long *
+read_vector_register_1 (reg) 
+    int reg;
+{
+  switch (reg)
+    {
+    case VM_REGNUM:
+      return (long *) vector_registers.vm;
+    case VS_REGNUM:
+      return (long *) &vector_registers.vls;
+    case VL_REGNUM:
+      return 1 + (long *) &vector_registers.vls;
+    default:
+      return (long *) &vector_registers.vr[reg];
+    }
+}
+
+/* Write vector register REG, element ELEMENT, new value VAL.
+   NB: must use read-modify-write on the entire vector state,
+   since pattach does not do offsetted writes correctly.  */
+
+static void
+write_vector_register (reg, element, val)
+    int reg, element;
+    ULONGEST val;
+{
+  if (have_inferior_p ())
+    {
+      errno = 0;
+      ps.pi_thread = inferior_thread;
+      ps.pi_offset = 0;
+      ps.pi_buffer = (char *) &vector_registers;
+      ps.pi_nbytes = sizeof vector_registers;
+
+      ioctl (inferior_fd, PIXRDVREGS, &ps);
+
+      switch (reg)
+	{
+	case VL_REGNUM:
+	  vector_registers.vls =
+	    (vector_registers.vls & 0xffffffff00000000LL)
+	      + (unsigned long) val;
+	  break;
+
+	case VS_REGNUM:
+	  vector_registers.vls =
+	    (val << 32) + (unsigned long) vector_registers.vls;
+	  break;
+	    
+	default:
+	  vector_registers.vr[reg].el[element] = val;
+	  break;
+	}
+
+      ioctl (inferior_fd, PIXWRVREGS, &ps);
+
+      if (errno)
+	perror_with_name ("writing vector register");
+    }
+}
+
+/* Return the contents of communication register NUM.  */ 
+
+static ULONGEST 
+read_comm_register (num)
+     int num;
+{
+  if (have_inferior_p ())
+    {
+      ps.pi_buffer = (char *) &comm_registers;
+      ps.pi_nbytes = sizeof comm_registers;
+      ps.pi_offset = 0;
+      ps.pi_thread = inferior_thread;
+      ioctl (inferior_fd, PIXRDCREGS, &ps);
+    }
+  return comm_registers.crreg.r4[num];
+}
+
+/* Store a new value VAL into communication register NUM.  
+   NB: Must use read-modify-write on the whole comm register set
+   since pattach does not do offsetted writes correctly.  */
+
+static void
+write_comm_register (num, val)
+     int num;
+     ULONGEST val;
+{
+  if (have_inferior_p ())
+    {
+      ps.pi_buffer = (char *) &comm_registers;
+      ps.pi_nbytes = sizeof comm_registers;
+      ps.pi_offset = 0;
+      ps.pi_thread = inferior_thread;
+      ioctl (inferior_fd, PIXRDCREGS, &ps);
+      comm_registers.crreg.r4[num] = val;
+      ioctl (inferior_fd, PIXWRCREGS, &ps);
+    }
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+resume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  if (step || signal)
+    thread_continue (inferior_thread, step, signal);
+  else
+    thread_continue (-1, 0, 0);
+}
+
+/* Maybe resume some threads.
+   THREAD is which thread to resume, or -1 to resume them all.
+   STEP and SIGNAL are as in resume.
+
+   Global variable ALL_CONTINUE is set when we are here to do a
+   `cont' command; otherwise we may be doing `finish' or a call or
+   something else that will not tolerate an automatic thread switch.
+
+   If there are stopped threads waiting to deliver signals, and
+   ALL_CONTINUE, do not actually resume anything.  gdb will do a wait
+   and see one of the stopped threads in the queue.  */
+
+static void
+thread_continue (thread, step, signal)
+     int thread, step, signal;
+{
+  int n;
+
+  /* If we are to continue all threads, but not for the CONTINUE command,
+     pay no attention and continue only the selected thread.  */
+
+  if (thread < 0 && ! all_continue)
+    thread = inferior_thread;
+
+  /* If we are not stepping, we have now executed the continue part
+     of a CONTINUE command.  */
+
+  if (! step)
+    all_continue = 0;
+
+  /* Allow wait() to switch threads if this is an all-out continue.  */
+
+  thread_switch_ok = thread < 0;
+
+  /* If there are threads queued up, don't resume.  */
+
+  if (thread_switch_ok && ! signal_stack_is_empty ())
+    return;
+
+  /* OK, do it.  */
+
+  for (n = 0; n < n_threads; n++)
+    if (thread_state[n] == PI_TALIVE)
+      {
+	select_thread (n);
+
+	if ((thread < 0 || n == thread) && ! thread_is_in_kernel[n])
+	  {
+	    /* Blam the trace bits in the stack's saved psws to match 
+	       the desired step mode.  This is required so that
+	       single-stepping a return doesn't restore a psw with a
+	       clear trace bit and fly away, and conversely,
+	       proceeding through a return in a routine that was
+	       stepped into doesn't cause a phantom break by restoring
+	       a psw with the trace bit set. */
+	    scan_stack (PSW_T_BIT, step);
+	    scan_stack (PSW_S_BIT, sequential);
+	  }
+
+	ps.pi_buffer = registers;
+	ps.pi_nbytes = REGISTER_BYTES;
+	ps.pi_offset = 0;
+	ps.pi_thread = n;
+	if (! thread_is_in_kernel[n])
+	  if (ioctl (inferior_fd, PIXWRREGS, &ps))
+	    perror_with_name ("PIXWRREGS");
+
+	if (thread < 0 || n == thread)
+	  {
+	    ps.pi_pc = 1;
+	    ps.pi_signo = signal;
+	    if (ioctl (inferior_fd, step ? PIXSTEP : PIXCONTINUE, &ps) < 0)
+	      perror_with_name ("PIXCONTINUE");
+	  }
+      }
+
+  if (ioctl (inferior_fd, PIXRUN, &ps) < 0)
+    perror_with_name ("PIXRUN");
+}
+
+/* Replacement for system wait routine.  
+
+   The system wait returns with one or more threads stopped by
+   signals.  Put stopped threads on a stack and return them one by
+   one, so that it appears that wait returns one thread at a time.
+
+   Global variable THREAD_SWITCH_OK is set when gdb can tolerate wait
+   returning a new thread.  If it is false, then only one thread is
+   running; we will do a real wait, the thread will do something, and
+   we will return that.  */
+
+pid_t
+wait (w)
+    union wait *w;
+{
+  int pid;
+
+  if (!w)
+    return wait3 (0, 0, 0);
+
+  /* Do a real wait if we were told to, or if there are no queued threads.  */
+
+  if (! thread_switch_ok || signal_stack_is_empty ())
+    {
+      int thread;
+
+      pid = wait3 (w, 0, 0);
+
+      if (!WIFSTOPPED (*w) || pid != inferior_pid)
+	return pid;
+
+      /* The inferior has done something and stopped.  Read in all the
+	 threads' registers, and queue up any signals that happened.  */
+
+      if (ioctl (inferior_fd, PIXGETTHCOUNT, &ps) < 0)
+	perror_with_name ("PIXGETTHCOUNT");
+      
+      n_threads = ps.pi_othdcnt;
+      for (thread = 0; thread < n_threads; thread++)
+	{
+	  ps.pi_thread = thread;
+	  if (ioctl (inferior_fd, PIXGETSUBCODE, &ps) < 0)
+	    perror_with_name ("PIXGETSUBCODE");
+	  thread_state[thread] = ps.pi_otstate;
+
+	  if (ps.pi_otstate == PI_TALIVE)
+	    {
+	      select_thread (thread);
+	      ps.pi_buffer = registers;
+	      ps.pi_nbytes = REGISTER_BYTES;
+	      ps.pi_offset = 0;
+	      ps.pi_thread = thread;
+	      if (ioctl (inferior_fd, PIXRDREGS, &ps) < 0)
+		perror_with_name ("PIXRDREGS");
+
+	      registers_fetched ();
+
+	      thread_pc[thread] = read_pc ();
+	      thread_signal[thread] = ps.pi_osigno;
+	      thread_sigcode[thread] = ps.pi_osigcode;
+
+	      /* If the thread's stack has a context frame
+		 on top, something fucked is going on.  I do not
+		 know what, but do I know this: the only thing you
+		 can do with such a thread is continue it.  */
+
+	      thread_is_in_kernel[thread] = 
+		((read_register (PS_REGNUM) >> 25) & 3) == 0;
+
+	      /* Signals push an extended frame and then fault
+		 with a ridiculous pc.  Pop the frame.  */
+
+	      if (thread_pc[thread] > STACK_END_ADDR)
+		{
+		  POP_FRAME;
+		  if (is_break_pc (thread_pc[thread]))
+		    thread_pc[thread] = read_pc () - 2;
+		  else
+		    thread_pc[thread] = read_pc ();
+		  write_register (PC_REGNUM, thread_pc[thread]);
+		}
+	      
+	      if (ps.pi_osigno || ps.pi_osigcode)
+		{
+		  signal_stack++;
+		  signal_stack->pid = pid;
+		  signal_stack->thread = thread;
+		  signal_stack->signo = thread_signal[thread];
+		  signal_stack->subsig = thread_sigcode[thread];
+		  signal_stack->pc = thread_pc[thread];
+		}
+
+	      /* The following hackery is caused by a unix 7.1 feature:
+		 the inferior's fixed scheduling mode is cleared when
+		 it execs the shell (since the shell is not a parallel
+		 program).  So, note the 5.4 trap we get when
+		 the shell does its exec, then catch the 5.0 trap 
+		 that occurs when the debuggee starts, and set fixed
+		 scheduling mode properly.  */
+
+	      if (ps.pi_osigno == 5 && ps.pi_osigcode == 4)
+		exec_trap_timer = 1;
+	      else
+		exec_trap_timer--;
+	      
+	      if (ps.pi_osigno == 5 && exec_trap_timer == 0)
+		set_fixed_scheduling (pid, parallel == 2);
+	    }
+	}
+
+      if (signal_stack_is_empty ())
+	error ("no active threads?!");
+    }
+
+  /* Select the thread that stopped, and return *w saying why.  */
+
+  select_thread (signal_stack->thread);
+
+ FIXME: need to convert from host sig.
+  stop_signal = signal_stack->signo;
+  stop_sigcode = signal_stack->subsig;
+
+  WSETSTOP (*w, signal_stack->signo);
+  w->w_thread = signal_stack->thread;
+  return (signal_stack--)->pid;
+}
+
+/* Select thread THREAD -- its registers, stack, per-thread memory.
+   This is the only routine that may assign to inferior_thread
+   or thread_regs[].  */
+
+static void
+select_thread (thread)
+     int thread;
+{
+  if (thread == inferior_thread)
+    return;
+
+  memcpy (thread_regs[inferior_thread], registers, REGISTER_BYTES);
+  ps.pi_thread = inferior_thread = thread;
+  if (have_inferior_p ())
+    ioctl (inferior_fd, PISETRWTID, &ps);
+  memcpy (registers, thread_regs[thread], REGISTER_BYTES);
+}
+  
+/* Routine to set or clear a psw bit in the psw and also all psws
+   saved on the stack.  Quits when we get to a frame in which the
+   saved psw is correct. */
+
+static void
+scan_stack (bit, val)
+    long bit, val;
+{
+  long ps = read_register (PS_REGNUM);
+  long fp;
+  if (val ? !(ps & bit) : (ps & bit))
+    {    
+      ps ^= bit;
+      write_register (PS_REGNUM, ps);
+
+      fp = read_register (FP_REGNUM);
+      while (fp & 0x80000000)
+	{
+	  ps = read_memory_integer (fp + 4, 4);
+	  if (val ? (ps & bit) : !(ps & bit))
+	    break;
+	  ps ^= bit;
+	  write_memory (fp + 4, &ps, 4);
+	  fp = read_memory_integer (fp + 8, 4);
+	}
+    }
+}
+
+/* Set fixed scheduling (alliant mode) of process PID to ARG (0 or 1).  */
+
+static void
+set_fixed_scheduling (pid, arg)
+      int arg;
+{
+  struct pattributes pattr;
+  getpattr (pid, &pattr);
+  pattr.pattr_pfixed = arg;
+  setpattr (pid, &pattr);
+}
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int n;
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+  n_core = 0;
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+
+      if (myread (corechan, &filehdr, sizeof filehdr) < 0)
+	perror_with_name (filename);
+
+      if (!IS_CORE_SOFF_MAGIC (filehdr.h_magic))
+	error ("%s: not a core file.\n", filename);
+
+      if (myread (corechan, &opthdr, filehdr.h_opthdr) < 0)
+	perror_with_name (filename);
+
+      /* Read through the section headers.
+	 For text, data, etc, record an entry in the core file map.
+	 For context and tcontext, record the file address of
+	 the context blocks.  */
+
+      lseek (corechan, (long) filehdr.h_scnptr, 0);
+
+      n_threads = 0;
+      for (n = 0; n < filehdr.h_nscns; n++)
+	{
+	  if (myread (corechan, &scnhdr, sizeof scnhdr) < 0)
+	    perror_with_name (filename);
+	  if ((scnhdr.s_flags & S_TYPMASK) >= S_TEXT
+	      && (scnhdr.s_flags & S_TYPMASK) <= S_COMON)
+	    {
+	      core_map[n_core].mem_addr = scnhdr.s_vaddr;
+	      core_map[n_core].mem_end = scnhdr.s_vaddr + scnhdr.s_size;
+	      core_map[n_core].file_addr = scnhdr.s_scnptr;
+	      core_map[n_core].type = scnhdr.s_flags & S_TYPMASK;
+	      if (core_map[n_core].type != S_TBSS
+		  && core_map[n_core].type != S_TDATA
+		  && core_map[n_core].type != S_TTEXT)
+		core_map[n_core].thread = -1;
+	      else if (n_core == 0
+		       || core_map[n_core-1].mem_addr != scnhdr.s_vaddr)
+		core_map[n_core].thread = 0;
+	      else 
+		core_map[n_core].thread = core_map[n_core-1].thread + 1;
+	      n_core++;
+	    }
+	  else if ((scnhdr.s_flags & S_TYPMASK) == S_CONTEXT)
+	    context_offset = scnhdr.s_scnptr;
+	  else if ((scnhdr.s_flags & S_TYPMASK) == S_TCONTEXT) 
+	    tcontext_offset[n_threads++] = scnhdr.s_scnptr;
+	}
+
+      /* Read the context block, struct user, struct proc,
+	 and the comm regs.  */
+
+      lseek (corechan, context_offset, 0);
+      if (myread (corechan, &c, sizeof c) < 0)
+	perror_with_name (filename);
+      lseek (corechan, c.core_user_p, 0);
+      if (myread (corechan, &u, sizeof u) < 0)
+	perror_with_name (filename);
+      lseek (corechan, c.core_proc_p, 0);
+      if (myread (corechan, &pr, sizeof pr) < 0)
+	perror_with_name (filename);
+      comm_registers = pr.p_creg;
+
+      /* Core file apparently is really there.  Make it really exist
+	 for xfer_core_file so we can do read_memory on it. */
+
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	corefile = concat (current_directory, "/", filename, NULL);
+
+      printf_filtered ("Program %s ", u.u_comm);
+
+      /* Read the thread registers and fill in the thread_xxx[] data.  */
+
+      for (n = 0; n < n_threads; n++)
+	{
+	  select_thread (n);
+
+	  lseek (corechan, tcontext_offset[n], 0);
+	  if (myread (corechan, &tc, sizeof tc) < 0)
+	    perror_with_name (corefile);
+	  lseek (corechan, tc.core_thread_p, 0);
+	  if (myread (corechan, &th, sizeof th) < 0)
+	    perror_with_name (corefile);
+
+	  lseek (corechan, tc.core_syscall_context_p, 0);
+	  if (myread (corechan, registers, REGISTER_BYTES) < 0)
+	    perror_with_name (corefile);
+
+	  thread_signal[n] = th.t_cursig;
+	  thread_sigcode[n] = th.t_code;
+	  thread_state[n] = th.t_state;
+	  thread_pc[n] = read_pc ();
+
+	  if (thread_pc[n] > STACK_END_ADDR)
+	    {
+	      POP_FRAME;
+	      if (is_break_pc (thread_pc[n]))
+		thread_pc[n] = read_pc () - 2;
+	      else
+		thread_pc[n] = read_pc ();
+	      write_register (PC_REGNUM, thread_pc[n]);
+	    }
+
+	  printf_filtered ("thread %d received signal %d, %s\n",
+			   n, thread_signal[n],
+			   safe_strsignal (thread_signal[n]));
+	}
+
+      /* Select an interesting thread -- also-rans died with SIGKILL,
+	 so find one that didn't.  */
+
+      for (n = 0; n < n_threads; n++)
+	if (thread_signal[n] != 0 && thread_signal[n] != SIGKILL)
+	  {
+	    select_thread (n);
+	    stop_signal = thread_signal[n];
+	    stop_sigcode = thread_sigcode[n];
+	    break;
+	  }
+
+      core_aouthdr.a_magic = 0;
+
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+      validate_files ();
+
+      print_stack_frame (selected_frame, selected_frame_level, -1);
+    }
+  else if (from_tty)
+    printf_filtered ("No core file now.\n");
+}
diff --git a/gdb/copying.awk b/gdb/copying.awk
new file mode 100644
index 0000000..4f53e92
--- /dev/null
+++ b/gdb/copying.awk
@@ -0,0 +1,77 @@
+BEGIN	{
+	  FS="\"";
+	  print "/* ==> Do not modify this file!!  It is created automatically";
+	  print "   by copying.awk.  Modify copying.awk instead.  <== */";
+	  print ""
+	  print "#include \"defs.h\""
+	  print "#include \"command.h\""
+	  print "#include \"gdbcmd.h\""
+	  print ""
+	  print "static void show_copying_command PARAMS ((char *, int));"
+	  print ""
+	  print "static void show_warranty_command PARAMS ((char *, int));"
+	  print ""
+	  print "void _initialize_copying PARAMS ((void));"
+	  print ""
+	  print "extern int immediate_quit;";
+	  print "static void";
+	  print "show_copying_command (ignore, from_tty)";
+	  print "     char *ignore;";
+	  print "     int from_tty;";
+	  print "{";
+	  print "  immediate_quit++;";
+	}
+NR == 1,/^[ 	]*NO WARRANTY[ 	]*$/	{
+	  if ($0 ~ //)
+	    {
+	      printf "  printf_filtered (\"\\n\");\n";
+	    }
+	  else if ($0 !~ /^[ 	]*NO WARRANTY[ 	]*$/) 
+	    {
+	      printf "  printf_filtered (\"";
+	      for (i = 1; i < NF; i++)
+		printf "%s\\\"", $i;
+	      printf "%s\\n\");\n", $NF;
+	    }
+	}
+/^[	 ]*NO WARRANTY[ 	]*$/	{
+	  print "  immediate_quit--;";
+	  print "}";
+	  print "";
+	  print "static void";
+	  print "show_warranty_command (ignore, from_tty)";
+	  print "     char *ignore;";
+	  print "     int from_tty;";
+	  print "{";
+	  print "  immediate_quit++;";
+	}
+/^[ 	]*NO WARRANTY[ 	]*$/, /^[ 	]*END OF TERMS AND CONDITIONS[ 	]*$/{  
+	  if (! ($0 ~ /^[ 	]*END OF TERMS AND CONDITIONS[ 	]*$/)) 
+	    {
+	      printf "  printf_filtered (\"";
+	      for (i = 1; i < NF; i++)
+		printf "%s\\\"", $i;
+	      printf "%s\\n\");\n", $NF;
+	    }
+	}
+END	{
+	  print "  immediate_quit--;";
+	  print "}";
+	  print "";
+	  print "void"
+	  print "_initialize_copying ()";
+	  print "{";
+	  print "  add_cmd (\"copying\", no_class, show_copying_command,";
+	  print "	   \"Conditions for redistributing copies of GDB.\",";
+	  print "	   &showlist);";
+	  print "  add_cmd (\"warranty\", no_class, show_warranty_command,";
+	  print "	   \"Various kinds of warranty you do not have.\",";
+	  print "	   &showlist);";
+	  print "";
+	  print "  /* For old-timers, allow \"info copying\", etc.  */";
+	  print "  add_info (\"copying\", show_copying_command,";
+	  print "	    \"Conditions for redistributing copies of GDB.\");";
+	  print "  add_info (\"warranty\", show_warranty_command,";
+	  print "	    \"Various kinds of warranty you do not have.\");";
+	  print "}";
+	}
diff --git a/gdb/copying.c b/gdb/copying.c
new file mode 100644
index 0000000..a36db1f
--- /dev/null
+++ b/gdb/copying.c
@@ -0,0 +1,327 @@
+/* ==> Do not modify this file!!  It is created automatically
+   by copying.awk.  Modify copying.awk instead.  <== */
+
+#include "defs.h"
+#include "command.h"
+#include "gdbcmd.h"
+
+static void show_copying_command PARAMS ((char *, int));
+
+static void show_warranty_command PARAMS ((char *, int));
+
+void _initialize_copying PARAMS ((void));
+
+extern int immediate_quit;
+static void
+show_copying_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  immediate_quit++;
+  printf_filtered ("		    GNU GENERAL PUBLIC LICENSE\n");
+  printf_filtered ("		       Version 2, June 1991\n");
+  printf_filtered ("\n");
+  printf_filtered (" Copyright (C) 1989, 1991 Free Software Foundation, Inc.\n");
+  printf_filtered ("                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA\n");
+  printf_filtered (" Everyone is permitted to copy and distribute verbatim copies\n");
+  printf_filtered (" of this license document, but changing it is not allowed.\n");
+  printf_filtered ("\n");
+  printf_filtered ("			    Preamble\n");
+  printf_filtered ("\n");
+  printf_filtered ("  The licenses for most software are designed to take away your\n");
+  printf_filtered ("freedom to share and change it.  By contrast, the GNU General Public\n");
+  printf_filtered ("License is intended to guarantee your freedom to share and change free\n");
+  printf_filtered ("software--to make sure the software is free for all its users.  This\n");
+  printf_filtered ("General Public License applies to most of the Free Software\n");
+  printf_filtered ("Foundation's software and to any other program whose authors commit to\n");
+  printf_filtered ("using it.  (Some other Free Software Foundation software is covered by\n");
+  printf_filtered ("the GNU Library General Public License instead.)  You can apply it to\n");
+  printf_filtered ("your programs, too.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  When we speak of free software, we are referring to freedom, not\n");
+  printf_filtered ("price.  Our General Public Licenses are designed to make sure that you\n");
+  printf_filtered ("have the freedom to distribute copies of free software (and charge for\n");
+  printf_filtered ("this service if you wish), that you receive source code or can get it\n");
+  printf_filtered ("if you want it, that you can change the software or use pieces of it\n");
+  printf_filtered ("in new free programs; and that you know you can do these things.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  To protect your rights, we need to make restrictions that forbid\n");
+  printf_filtered ("anyone to deny you these rights or to ask you to surrender the rights.\n");
+  printf_filtered ("These restrictions translate to certain responsibilities for you if you\n");
+  printf_filtered ("distribute copies of the software, or if you modify it.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  For example, if you distribute copies of such a program, whether\n");
+  printf_filtered ("gratis or for a fee, you must give the recipients all the rights that\n");
+  printf_filtered ("you have.  You must make sure that they, too, receive or can get the\n");
+  printf_filtered ("source code.  And you must show them these terms so they know their\n");
+  printf_filtered ("rights.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  We protect your rights with two steps: (1) copyright the software, and\n");
+  printf_filtered ("(2) offer you this license which gives you legal permission to copy,\n");
+  printf_filtered ("distribute and/or modify the software.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  Also, for each author's protection and ours, we want to make certain\n");
+  printf_filtered ("that everyone understands that there is no warranty for this free\n");
+  printf_filtered ("software.  If the software is modified by someone else and passed on, we\n");
+  printf_filtered ("want its recipients to know that what they have is not the original, so\n");
+  printf_filtered ("that any problems introduced by others will not reflect on the original\n");
+  printf_filtered ("authors' reputations.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  Finally, any free program is threatened constantly by software\n");
+  printf_filtered ("patents.  We wish to avoid the danger that redistributors of a free\n");
+  printf_filtered ("program will individually obtain patent licenses, in effect making the\n");
+  printf_filtered ("program proprietary.  To prevent this, we have made it clear that any\n");
+  printf_filtered ("patent must be licensed for everyone's free use or not licensed at all.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  The precise terms and conditions for copying, distribution and\n");
+  printf_filtered ("modification follow.\n");
+  printf_filtered ("\n");
+  printf_filtered ("		    GNU GENERAL PUBLIC LICENSE\n");
+  printf_filtered ("   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION\n");
+  printf_filtered ("\n");
+  printf_filtered ("  0. This License applies to any program or other work which contains\n");
+  printf_filtered ("a notice placed by the copyright holder saying it may be distributed\n");
+  printf_filtered ("under the terms of this General Public License.  The \"Program\", below,\n");
+  printf_filtered ("refers to any such program or work, and a \"work based on the Program\"\n");
+  printf_filtered ("means either the Program or any derivative work under copyright law:\n");
+  printf_filtered ("that is to say, a work containing the Program or a portion of it,\n");
+  printf_filtered ("either verbatim or with modifications and/or translated into another\n");
+  printf_filtered ("language.  (Hereinafter, translation is included without limitation in\n");
+  printf_filtered ("the term \"modification\".)  Each licensee is addressed as \"you\".\n");
+  printf_filtered ("\n");
+  printf_filtered ("Activities other than copying, distribution and modification are not\n");
+  printf_filtered ("covered by this License; they are outside its scope.  The act of\n");
+  printf_filtered ("running the Program is not restricted, and the output from the Program\n");
+  printf_filtered ("is covered only if its contents constitute a work based on the\n");
+  printf_filtered ("Program (independent of having been made by running the Program).\n");
+  printf_filtered ("Whether that is true depends on what the Program does.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  1. You may copy and distribute verbatim copies of the Program's\n");
+  printf_filtered ("source code as you receive it, in any medium, provided that you\n");
+  printf_filtered ("conspicuously and appropriately publish on each copy an appropriate\n");
+  printf_filtered ("copyright notice and disclaimer of warranty; keep intact all the\n");
+  printf_filtered ("notices that refer to this License and to the absence of any warranty;\n");
+  printf_filtered ("and give any other recipients of the Program a copy of this License\n");
+  printf_filtered ("along with the Program.\n");
+  printf_filtered ("\n");
+  printf_filtered ("You may charge a fee for the physical act of transferring a copy, and\n");
+  printf_filtered ("you may at your option offer warranty protection in exchange for a fee.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  2. You may modify your copy or copies of the Program or any portion\n");
+  printf_filtered ("of it, thus forming a work based on the Program, and copy and\n");
+  printf_filtered ("distribute such modifications or work under the terms of Section 1\n");
+  printf_filtered ("above, provided that you also meet all of these conditions:\n");
+  printf_filtered ("\n");
+  printf_filtered ("    a) You must cause the modified files to carry prominent notices\n");
+  printf_filtered ("    stating that you changed the files and the date of any change.\n");
+  printf_filtered ("\n");
+  printf_filtered ("    b) You must cause any work that you distribute or publish, that in\n");
+  printf_filtered ("    whole or in part contains or is derived from the Program or any\n");
+  printf_filtered ("    part thereof, to be licensed as a whole at no charge to all third\n");
+  printf_filtered ("    parties under the terms of this License.\n");
+  printf_filtered ("\n");
+  printf_filtered ("    c) If the modified program normally reads commands interactively\n");
+  printf_filtered ("    when run, you must cause it, when started running for such\n");
+  printf_filtered ("    interactive use in the most ordinary way, to print or display an\n");
+  printf_filtered ("    announcement including an appropriate copyright notice and a\n");
+  printf_filtered ("    notice that there is no warranty (or else, saying that you provide\n");
+  printf_filtered ("    a warranty) and that users may redistribute the program under\n");
+  printf_filtered ("    these conditions, and telling the user how to view a copy of this\n");
+  printf_filtered ("    License.  (Exception: if the Program itself is interactive but\n");
+  printf_filtered ("    does not normally print such an announcement, your work based on\n");
+  printf_filtered ("    the Program is not required to print an announcement.)\n");
+  printf_filtered ("\n");
+  printf_filtered ("These requirements apply to the modified work as a whole.  If\n");
+  printf_filtered ("identifiable sections of that work are not derived from the Program,\n");
+  printf_filtered ("and can be reasonably considered independent and separate works in\n");
+  printf_filtered ("themselves, then this License, and its terms, do not apply to those\n");
+  printf_filtered ("sections when you distribute them as separate works.  But when you\n");
+  printf_filtered ("distribute the same sections as part of a whole which is a work based\n");
+  printf_filtered ("on the Program, the distribution of the whole must be on the terms of\n");
+  printf_filtered ("this License, whose permissions for other licensees extend to the\n");
+  printf_filtered ("entire whole, and thus to each and every part regardless of who wrote it.\n");
+  printf_filtered ("\n");
+  printf_filtered ("Thus, it is not the intent of this section to claim rights or contest\n");
+  printf_filtered ("your rights to work written entirely by you; rather, the intent is to\n");
+  printf_filtered ("exercise the right to control the distribution of derivative or\n");
+  printf_filtered ("collective works based on the Program.\n");
+  printf_filtered ("\n");
+  printf_filtered ("In addition, mere aggregation of another work not based on the Program\n");
+  printf_filtered ("with the Program (or with a work based on the Program) on a volume of\n");
+  printf_filtered ("a storage or distribution medium does not bring the other work under\n");
+  printf_filtered ("the scope of this License.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  3. You may copy and distribute the Program (or a work based on it,\n");
+  printf_filtered ("under Section 2) in object code or executable form under the terms of\n");
+  printf_filtered ("Sections 1 and 2 above provided that you also do one of the following:\n");
+  printf_filtered ("\n");
+  printf_filtered ("    a) Accompany it with the complete corresponding machine-readable\n");
+  printf_filtered ("    source code, which must be distributed under the terms of Sections\n");
+  printf_filtered ("    1 and 2 above on a medium customarily used for software interchange; or,\n");
+  printf_filtered ("\n");
+  printf_filtered ("    b) Accompany it with a written offer, valid for at least three\n");
+  printf_filtered ("    years, to give any third party, for a charge no more than your\n");
+  printf_filtered ("    cost of physically performing source distribution, a complete\n");
+  printf_filtered ("    machine-readable copy of the corresponding source code, to be\n");
+  printf_filtered ("    distributed under the terms of Sections 1 and 2 above on a medium\n");
+  printf_filtered ("    customarily used for software interchange; or,\n");
+  printf_filtered ("\n");
+  printf_filtered ("    c) Accompany it with the information you received as to the offer\n");
+  printf_filtered ("    to distribute corresponding source code.  (This alternative is\n");
+  printf_filtered ("    allowed only for noncommercial distribution and only if you\n");
+  printf_filtered ("    received the program in object code or executable form with such\n");
+  printf_filtered ("    an offer, in accord with Subsection b above.)\n");
+  printf_filtered ("\n");
+  printf_filtered ("The source code for a work means the preferred form of the work for\n");
+  printf_filtered ("making modifications to it.  For an executable work, complete source\n");
+  printf_filtered ("code means all the source code for all modules it contains, plus any\n");
+  printf_filtered ("associated interface definition files, plus the scripts used to\n");
+  printf_filtered ("control compilation and installation of the executable.  However, as a\n");
+  printf_filtered ("special exception, the source code distributed need not include\n");
+  printf_filtered ("anything that is normally distributed (in either source or binary\n");
+  printf_filtered ("form) with the major components (compiler, kernel, and so on) of the\n");
+  printf_filtered ("operating system on which the executable runs, unless that component\n");
+  printf_filtered ("itself accompanies the executable.\n");
+  printf_filtered ("\n");
+  printf_filtered ("If distribution of executable or object code is made by offering\n");
+  printf_filtered ("access to copy from a designated place, then offering equivalent\n");
+  printf_filtered ("access to copy the source code from the same place counts as\n");
+  printf_filtered ("distribution of the source code, even though third parties are not\n");
+  printf_filtered ("compelled to copy the source along with the object code.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  4. You may not copy, modify, sublicense, or distribute the Program\n");
+  printf_filtered ("except as expressly provided under this License.  Any attempt\n");
+  printf_filtered ("otherwise to copy, modify, sublicense or distribute the Program is\n");
+  printf_filtered ("void, and will automatically terminate your rights under this License.\n");
+  printf_filtered ("However, parties who have received copies, or rights, from you under\n");
+  printf_filtered ("this License will not have their licenses terminated so long as such\n");
+  printf_filtered ("parties remain in full compliance.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  5. You are not required to accept this License, since you have not\n");
+  printf_filtered ("signed it.  However, nothing else grants you permission to modify or\n");
+  printf_filtered ("distribute the Program or its derivative works.  These actions are\n");
+  printf_filtered ("prohibited by law if you do not accept this License.  Therefore, by\n");
+  printf_filtered ("modifying or distributing the Program (or any work based on the\n");
+  printf_filtered ("Program), you indicate your acceptance of this License to do so, and\n");
+  printf_filtered ("all its terms and conditions for copying, distributing or modifying\n");
+  printf_filtered ("the Program or works based on it.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  6. Each time you redistribute the Program (or any work based on the\n");
+  printf_filtered ("Program), the recipient automatically receives a license from the\n");
+  printf_filtered ("original licensor to copy, distribute or modify the Program subject to\n");
+  printf_filtered ("these terms and conditions.  You may not impose any further\n");
+  printf_filtered ("restrictions on the recipients' exercise of the rights granted herein.\n");
+  printf_filtered ("You are not responsible for enforcing compliance by third parties to\n");
+  printf_filtered ("this License.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  7. If, as a consequence of a court judgment or allegation of patent\n");
+  printf_filtered ("infringement or for any other reason (not limited to patent issues),\n");
+  printf_filtered ("conditions are imposed on you (whether by court order, agreement or\n");
+  printf_filtered ("otherwise) that contradict the conditions of this License, they do not\n");
+  printf_filtered ("excuse you from the conditions of this License.  If you cannot\n");
+  printf_filtered ("distribute so as to satisfy simultaneously your obligations under this\n");
+  printf_filtered ("License and any other pertinent obligations, then as a consequence you\n");
+  printf_filtered ("may not distribute the Program at all.  For example, if a patent\n");
+  printf_filtered ("license would not permit royalty-free redistribution of the Program by\n");
+  printf_filtered ("all those who receive copies directly or indirectly through you, then\n");
+  printf_filtered ("the only way you could satisfy both it and this License would be to\n");
+  printf_filtered ("refrain entirely from distribution of the Program.\n");
+  printf_filtered ("\n");
+  printf_filtered ("If any portion of this section is held invalid or unenforceable under\n");
+  printf_filtered ("any particular circumstance, the balance of the section is intended to\n");
+  printf_filtered ("apply and the section as a whole is intended to apply in other\n");
+  printf_filtered ("circumstances.\n");
+  printf_filtered ("\n");
+  printf_filtered ("It is not the purpose of this section to induce you to infringe any\n");
+  printf_filtered ("patents or other property right claims or to contest validity of any\n");
+  printf_filtered ("such claims; this section has the sole purpose of protecting the\n");
+  printf_filtered ("integrity of the free software distribution system, which is\n");
+  printf_filtered ("implemented by public license practices.  Many people have made\n");
+  printf_filtered ("generous contributions to the wide range of software distributed\n");
+  printf_filtered ("through that system in reliance on consistent application of that\n");
+  printf_filtered ("system; it is up to the author/donor to decide if he or she is willing\n");
+  printf_filtered ("to distribute software through any other system and a licensee cannot\n");
+  printf_filtered ("impose that choice.\n");
+  printf_filtered ("\n");
+  printf_filtered ("This section is intended to make thoroughly clear what is believed to\n");
+  printf_filtered ("be a consequence of the rest of this License.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  8. If the distribution and/or use of the Program is restricted in\n");
+  printf_filtered ("certain countries either by patents or by copyrighted interfaces, the\n");
+  printf_filtered ("original copyright holder who places the Program under this License\n");
+  printf_filtered ("may add an explicit geographical distribution limitation excluding\n");
+  printf_filtered ("those countries, so that distribution is permitted only in or among\n");
+  printf_filtered ("countries not thus excluded.  In such case, this License incorporates\n");
+  printf_filtered ("the limitation as if written in the body of this License.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  9. The Free Software Foundation may publish revised and/or new versions\n");
+  printf_filtered ("of the General Public License from time to time.  Such new versions will\n");
+  printf_filtered ("be similar in spirit to the present version, but may differ in detail to\n");
+  printf_filtered ("address new problems or concerns.\n");
+  printf_filtered ("\n");
+  printf_filtered ("Each version is given a distinguishing version number.  If the Program\n");
+  printf_filtered ("specifies a version number of this License which applies to it and \"any\n");
+  printf_filtered ("later version\", you have the option of following the terms and conditions\n");
+  printf_filtered ("either of that version or of any later version published by the Free\n");
+  printf_filtered ("Software Foundation.  If the Program does not specify a version number of\n");
+  printf_filtered ("this License, you may choose any version ever published by the Free Software\n");
+  printf_filtered ("Foundation.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  10. If you wish to incorporate parts of the Program into other free\n");
+  printf_filtered ("programs whose distribution conditions are different, write to the author\n");
+  printf_filtered ("to ask for permission.  For software which is copyrighted by the Free\n");
+  printf_filtered ("Software Foundation, write to the Free Software Foundation; we sometimes\n");
+  printf_filtered ("make exceptions for this.  Our decision will be guided by the two goals\n");
+  printf_filtered ("of preserving the free status of all derivatives of our free software and\n");
+  printf_filtered ("of promoting the sharing and reuse of software generally.\n");
+  printf_filtered ("\n");
+  immediate_quit--;
+}
+
+static void
+show_warranty_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  immediate_quit++;
+  printf_filtered ("			    NO WARRANTY\n");
+  printf_filtered ("\n");
+  printf_filtered ("  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY\n");
+  printf_filtered ("FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN\n");
+  printf_filtered ("OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES\n");
+  printf_filtered ("PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED\n");
+  printf_filtered ("OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF\n");
+  printf_filtered ("MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS\n");
+  printf_filtered ("TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE\n");
+  printf_filtered ("PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,\n");
+  printf_filtered ("REPAIR OR CORRECTION.\n");
+  printf_filtered ("\n");
+  printf_filtered ("  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING\n");
+  printf_filtered ("WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR\n");
+  printf_filtered ("REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,\n");
+  printf_filtered ("INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING\n");
+  printf_filtered ("OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED\n");
+  printf_filtered ("TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY\n");
+  printf_filtered ("YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER\n");
+  printf_filtered ("PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE\n");
+  printf_filtered ("POSSIBILITY OF SUCH DAMAGES.\n");
+  printf_filtered ("\n");
+  immediate_quit--;
+}
+
+void
+_initialize_copying ()
+{
+  add_cmd ("copying", no_class, show_copying_command,
+	   "Conditions for redistributing copies of GDB.",
+	   &showlist);
+  add_cmd ("warranty", no_class, show_warranty_command,
+	   "Various kinds of warranty you do not have.",
+	   &showlist);
+
+  /* For old-timers, allow "info copying", etc.  */
+  add_info ("copying", show_copying_command,
+	    "Conditions for redistributing copies of GDB.");
+  add_info ("warranty", show_warranty_command,
+	    "Various kinds of warranty you do not have.");
+}
diff --git a/gdb/core-aout.c b/gdb/core-aout.c
new file mode 100644
index 0000000..3c1d499
--- /dev/null
+++ b/gdb/core-aout.c
@@ -0,0 +1,147 @@
+/* Extract registers from a "standard" core file, for GDB.
+   Copyright (C) 1988-1998  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Typically used on systems that have a.out format executables.
+   corefile.c is supposed to contain the more machine-independent
+   aspects of reading registers from core files, while this file is
+   more machine specific.  */
+
+#include "defs.h"
+
+#ifdef HAVE_PTRACE_H
+# include <ptrace.h>
+#else
+# ifdef HAVE_SYS_PTRACE_H
+#  include <sys/ptrace.h>
+# endif
+#endif
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include "gdbcore.h"
+#include "value.h" /* For supply_register.  */
+#include "inferior.h" /* For ARCH_NUM_REGS. */
+
+/* These are needed on various systems to expand REGISTER_U_ADDR.  */
+#ifndef USG
+#include <sys/dir.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/user.h>
+#endif
+
+#ifndef CORE_REGISTER_ADDR
+#define CORE_REGISTER_ADDR(regno, regptr) register_addr(regno, regptr)
+#endif /* CORE_REGISTER_ADDR */
+
+#ifdef NEED_SYS_CORE_H
+#include <sys/core.h>
+#endif
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+void _initialize_core_aout PARAMS ((void));
+
+/* Extract the register values out of the core file and store
+   them where `read_register' will find them.
+
+   CORE_REG_SECT points to the register values themselves, read into memory.
+   CORE_REG_SIZE is the size of that area.
+   WHICH says which set of registers we are handling (0 = int, 2 = float
+         on machines where they are discontiguous).
+   REG_ADDR is the offset from u.u_ar0 to the register values relative to
+            core_reg_sect.  This is used with old-fashioned core files to
+	    locate the registers in a large upage-plus-stack ".reg" section.
+	    Original upage address X is at location core_reg_sect+x+reg_addr.
+ */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;
+{
+  int regno;
+  CORE_ADDR addr;
+  int bad_reg = -1;
+  CORE_ADDR reg_ptr = -reg_addr; /* Original u.u_ar0 is -reg_addr. */
+  int numregs = ARCH_NUM_REGS;
+
+  /* If u.u_ar0 was an absolute address in the core file, relativize it now,
+     so we can use it as an offset into core_reg_sect.  When we're done,
+     "register 0" will be at core_reg_sect+reg_ptr, and we can use
+     CORE_REGISTER_ADDR to offset to the other registers.  If this is a modern
+     core file without a upage, reg_ptr will be zero and this is all a big
+     NOP.  */
+  if (reg_ptr > core_reg_size)
+    reg_ptr -= KERNEL_U_ADDR;
+
+  for (regno = 0; regno < numregs; regno++)
+    {
+      addr = CORE_REGISTER_ADDR (regno, reg_ptr);
+      if (addr >= core_reg_size
+	  && bad_reg < 0)
+	bad_reg = regno;
+    else
+      supply_register (regno, core_reg_sect + addr);
+    }
+
+  if (bad_reg >= 0)
+    error ("Register %s not found in core file.", REGISTER_NAME (bad_reg));
+}
+
+
+#ifdef REGISTER_U_ADDR
+
+/* Return the address in the core dump or inferior of register REGNO.
+   BLOCKEND is the address of the end of the user structure.  */
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  CORE_ADDR addr;
+
+  if (regno < 0 || regno >= ARCH_NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  REGISTER_U_ADDR (addr, blockend, regno);
+
+  return addr;
+}
+
+#endif /* REGISTER_U_ADDR */
+
+
+/* Register that we are able to handle aout (trad-core) file formats.  */
+
+static struct core_fns aout_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_aout ()
+{
+  add_core_fns (&aout_core_fns);
+}
diff --git a/gdb/core-regset.c b/gdb/core-regset.c
new file mode 100644
index 0000000..d925abe
--- /dev/null
+++ b/gdb/core-regset.c
@@ -0,0 +1,134 @@
+/* Machine independent GDB support for core files on systems using "regsets".
+   Copyright 1993-1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/*			N  O  T  E  S
+
+This file is used by most systems that implement /proc.  For these systems,
+the general registers are laid out the same way in both the core file and
+the gregset_p structure.  The current exception to this is Irix-4.*, where
+the gregset_p structure is split up into two pieces in the core file.
+
+The general register and floating point register sets are manipulated by
+separate ioctl's.  This file makes the assumption that if FP0_REGNUM is
+defined, then support for the floating point register set is desired,
+regardless of whether or not the actual target has floating point hardware.
+
+ */
+
+#include "defs.h"
+
+#include <time.h>
+#ifdef HAVE_SYS_PROCFS_H
+#include <sys/procfs.h>
+#endif
+#include <fcntl.h>
+#include <errno.h>
+#include "gdb_string.h"
+
+#include "inferior.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcore.h"
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+void _initialize_core_regset PARAMS ((void));
+
+/*
+
+GLOBAL FUNCTION
+
+	fetch_core_registers -- fetch current registers from core file
+
+SYNOPSIS
+
+	void fetch_core_registers (char *core_reg_sect,
+					  unsigned core_reg_size,
+					  int which, CORE_ADDR reg_addr)
+
+DESCRIPTION
+
+	Read the values of either the general register set (WHICH equals 0)
+	or the floating point register set (WHICH equals 2) from the core
+	file data (pointed to by CORE_REG_SECT), and update gdb's idea of
+	their current values.  The CORE_REG_SIZE parameter is ignored.
+
+NOTES
+
+	Use the indicated sizes to validate the gregset and fpregset
+	structures.
+*/
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+#if defined (HAVE_GREGSET_T) && defined (HAVE_FPREGSET_T)
+  gregset_t gregset;
+  fpregset_t fpregset;
+
+  if (which == 0)
+    {
+      if (core_reg_size != sizeof (gregset))
+	{
+	  warning ("wrong size gregset struct in core file");
+	}
+      else
+	{
+	  memcpy ((char *) &gregset, core_reg_sect, sizeof (gregset));
+	  supply_gregset (&gregset);
+	}
+    }
+  else if (which == 2)
+    {
+      if (core_reg_size != sizeof (fpregset))
+	{
+	  warning ("wrong size fpregset struct in core file");
+	}
+      else
+	{
+	  memcpy ((char *) &fpregset, core_reg_sect, sizeof (fpregset));
+#if defined (FP0_REGNUM)
+	  supply_fpregset (&fpregset);
+#endif
+	}
+    }
+#endif	/* defined(HAVE_GREGSET_T) && defined (HAVE_FPREGSET_T) */
+}
+
+
+/* Register that we are able to handle ELF file formats using standard
+   procfs "regset" structures.  */
+
+static struct core_fns regset_core_fns =
+{
+  bfd_target_elf_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_regset ()
+{
+  add_core_fns (&regset_core_fns);
+}
diff --git a/gdb/core-sol2.c b/gdb/core-sol2.c
new file mode 100644
index 0000000..3c69e63
--- /dev/null
+++ b/gdb/core-sol2.c
@@ -0,0 +1,133 @@
+/* Machine independent support for Solaris 2 core files for GDB.
+   Copyright 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/* Solaris comes with two flavours of core files, cores generated by
+   an ELF executable and cores generated by programs that were
+   run under BCP (the part of Solaris which allows it to run SunOS4
+   a.out files).
+   This file combines the core register fetching from core-regset.c
+   and sparc-nat.c to be able to read both flavours.  */
+
+#include "defs.h"
+#include <time.h>
+#include <sys/types.h>
+#include <sys/regset.h>
+#include <sys/procfs.h>
+#include <fcntl.h>
+#include <errno.h>
+#include "gdb_string.h"
+
+#include "inferior.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcore.h"
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+  prgregset_t prgregset;
+  prfpregset_t prfpregset;
+
+  if (which == 0)
+    {
+      if (core_reg_size == sizeof (prgregset))
+	{
+	  memcpy ((char *) &prgregset, core_reg_sect, sizeof (prgregset));
+	  supply_gregset (&prgregset);
+	}
+      else if (core_reg_size == sizeof (struct regs))
+	{
+#define gregs ((struct regs *)core_reg_sect)
+	  /* G0 *always* holds 0.  */
+	  *(int *)&registers[REGISTER_BYTE (0)] = 0;
+
+	  /* The globals and output registers.  */
+	  memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &gregs->r_g1, 
+		  15 * REGISTER_RAW_SIZE (G1_REGNUM));
+	  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = gregs->r_ps;
+	  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = gregs->r_pc;
+	  *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = gregs->r_npc;
+	  *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = gregs->r_y;
+
+	  /* My best guess at where to get the locals and input
+	     registers is exactly where they usually are, right above
+	     the stack pointer.  If the core dump was caused by a bus error
+	     from blowing away the stack pointer (as is possible) then this
+	     won't work, but it's worth the try. */
+	  {
+	    int sp;
+
+	    sp = *(int *)&registers[REGISTER_BYTE (SP_REGNUM)];
+	    if (0 != target_read_memory (sp,
+					 &registers[REGISTER_BYTE (L0_REGNUM)], 
+					 16 * REGISTER_RAW_SIZE (L0_REGNUM)))
+	      {
+		warning ("couldn't read input and local registers from core file\n");
+	      }
+	  }
+	}
+      else
+	{
+	  warning ("wrong size gregset struct in core file");
+	}
+    }
+  else if (which == 2)
+    {
+      if (core_reg_size == sizeof (prfpregset))
+	{
+	  memcpy ((char *) &prfpregset, core_reg_sect, sizeof (prfpregset));
+	  supply_fpregset (&prfpregset);
+	}
+      else if (core_reg_size >= sizeof (struct fpu))
+	{
+#define fpuregs  ((struct fpu *) core_reg_sect)
+	  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &fpuregs->fpu_fr,
+		  sizeof (fpuregs->fpu_fr));
+	  memcpy (&registers[REGISTER_BYTE (FPS_REGNUM)], &fpuregs->fpu_fsr,
+		  sizeof (FPU_FSR_TYPE));
+	}
+      else
+	{
+	  warning ("wrong size fpregset struct in core file");
+	}
+    }
+}
+
+
+/* Register that we are able to handle solaris core file formats. */
+
+static struct core_fns solaris_core_fns =
+{
+  bfd_target_elf_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_solaris ()
+{
+  add_core_fns (&solaris_core_fns);
+}
diff --git a/gdb/corefile.c b/gdb/corefile.c
new file mode 100644
index 0000000..94e56eb
--- /dev/null
+++ b/gdb/corefile.c
@@ -0,0 +1,479 @@
+/* Core dump and executable file functions above target vector, for GDB.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include "frame.h"  /* required by inferior.h */
+#include "inferior.h"
+#include "symtab.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "bfd.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "dis-asm.h"
+#include "language.h"
+#include "gdb_stat.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+extern char registers[];
+
+/* Local function declarations.  */
+
+static void call_extra_exec_file_hooks PARAMS ((char *filename));
+
+/* You can have any number of hooks for `exec_file_command' command to call.
+   If there's only one hook, it is set in exec_file_display hook.
+   If there are two or more hooks, they are set in exec_file_extra_hooks[],
+   and exec_file_display_hook is set to a function that calls all of them.
+   This extra complexity is needed to preserve compatibility with
+   old code that assumed that only one hook could be set, and which called
+   exec_file_display_hook directly.  */
+
+typedef void (*hook_type) PARAMS ((char *));
+
+hook_type exec_file_display_hook;		/* the original hook */
+static hook_type *exec_file_extra_hooks;	/* array of additional hooks */
+static int exec_file_hook_count = 0;		/* size of array */
+
+/* Binary file diddling handle for the core file.  */
+
+bfd *core_bfd = NULL;
+
+
+/* Backward compatability with old way of specifying core files.  */
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  struct target_ops *t;
+
+  dont_repeat ();			/* Either way, seems bogus. */
+
+  t = find_core_target ();
+  if (t != NULL)
+    if (!filename)
+      (t->to_detach) (filename, from_tty);
+    else
+      {
+        /* Yes, we were given the path of a core file.  Do we already
+           have a symbol file?  If not, can we determine it from the
+           core file?  If we can, do so.
+           */
+#ifdef HPUXHPPA
+        if (symfile_objfile == NULL)
+          {
+            char *  symfile;
+            symfile = t->to_core_file_to_sym_file (filename);
+            if (symfile)
+              {
+                char *  symfile_copy = strdup (symfile);
+
+                make_cleanup (free, symfile_copy);
+                symbol_file_command (symfile_copy, from_tty);
+              }
+            else
+              warning ("Unknown symbols for '%s'; use the 'symbol-file' command.", filename);
+          }
+#endif
+        (t->to_open) (filename, from_tty);
+      }
+  else
+    error ("GDB can't read core files on this machine.");
+}
+
+
+/* If there are two or more functions that wish to hook into exec_file_command,
+ * this function will call all of the hook functions. */
+
+static void
+call_extra_exec_file_hooks (filename)
+     char *filename;
+{
+  int i;
+
+  for (i = 0; i < exec_file_hook_count; i++)
+    (*exec_file_extra_hooks[i])(filename);
+}
+
+/* Call this to specify the hook for exec_file_command to call back.
+   This is called from the x-window display code.  */
+
+void
+specify_exec_file_hook (hook)
+     void (*hook) PARAMS ((char *));
+{
+  hook_type *new_array;
+
+  if (exec_file_display_hook != NULL)
+    {
+      /* There's already a hook installed.  Arrange to have both it
+       * and the subsequent hooks called. */
+      if (exec_file_hook_count == 0)
+	{
+	  /* If this is the first extra hook, initialize the hook array. */
+	  exec_file_extra_hooks = (hook_type *) xmalloc (sizeof(hook_type));
+	  exec_file_extra_hooks[0] = exec_file_display_hook;
+	  exec_file_display_hook = call_extra_exec_file_hooks;
+	  exec_file_hook_count = 1;
+	}
+
+      /* Grow the hook array by one and add the new hook to the end.
+         Yes, it's inefficient to grow it by one each time but since
+         this is hardly ever called it's not a big deal.  */
+      exec_file_hook_count++;
+      new_array =
+	(hook_type *) xrealloc (exec_file_extra_hooks,
+				exec_file_hook_count * sizeof(hook_type));
+      exec_file_extra_hooks = new_array;
+      exec_file_extra_hooks[exec_file_hook_count - 1] = hook;
+    }
+  else
+    exec_file_display_hook = hook;
+}
+
+/* The exec file must be closed before running an inferior.
+   If it is needed again after the inferior dies, it must
+   be reopened.  */
+
+void
+close_exec_file ()
+{
+#if 0 /* FIXME */
+  if (exec_bfd)
+    bfd_tempclose (exec_bfd);
+#endif
+}
+
+void
+reopen_exec_file ()
+{
+#if 0 /* FIXME */
+  if (exec_bfd)
+    bfd_reopen (exec_bfd);
+#else
+  char *filename;
+  int res;
+  struct stat st;
+  long mtime;
+
+  /* Don't do anything if the current target isn't exec. */
+  if (exec_bfd == NULL || strcmp (target_shortname, "exec") != 0)
+    return;
+ 
+  /* If the timestamp of the exec file has changed, reopen it. */
+  filename = strdup (bfd_get_filename (exec_bfd));
+  make_cleanup (free, filename);
+  mtime = bfd_get_mtime(exec_bfd);
+  res = stat (filename, &st);
+
+  if (mtime && mtime != st.st_mtime)
+    exec_file_command (filename, 0);
+#endif
+}
+
+/* If we have both a core file and an exec file,
+   print a warning if they don't go together.  */
+
+void
+validate_files ()
+{
+  if (exec_bfd && core_bfd)
+    {
+      if (!core_file_matches_executable_p (core_bfd, exec_bfd))
+	warning ("core file may not match specified executable file.");
+      else if (bfd_get_mtime(exec_bfd) > bfd_get_mtime(core_bfd))
+	warning ("exec file is newer than core file.");
+    }
+}
+
+/* Return the name of the executable file as a string.
+   ERR nonzero means get error if there is none specified;
+   otherwise return 0 in that case.  */
+
+char *
+get_exec_file (err)
+     int err;
+{
+  if (exec_bfd) return bfd_get_filename(exec_bfd);
+  if (!err)     return NULL;
+
+  error ("No executable file specified.\n\
+Use the \"file\" or \"exec-file\" command.");
+  return NULL;
+}
+
+
+/* Report a memory error with error().  */
+
+void
+memory_error (status, memaddr)
+     int status;
+     CORE_ADDR memaddr;
+{
+  if (status == EIO)
+    {
+      /* Actually, address between memaddr and memaddr + len
+	 was out of bounds. */
+      error_begin ();
+      printf_filtered ("Cannot access memory at address ");
+      print_address_numeric (memaddr, 1, gdb_stdout);
+      printf_filtered (".\n");
+      return_to_top_level (RETURN_ERROR);
+    }
+  else
+    {
+      error_begin ();
+      printf_filtered ("Error accessing memory address ");
+      print_address_numeric (memaddr, 1, gdb_stdout);
+      printf_filtered (": %s.\n",
+			 safe_strerror (status));
+      return_to_top_level (RETURN_ERROR);
+    }
+}
+
+/* Same as target_read_memory, but report an error if can't read.  */
+void
+read_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int status;
+  status = target_read_memory (memaddr, myaddr, len);
+  if (status != 0)
+    memory_error (status, memaddr);
+}
+
+void
+read_memory_section (memaddr, myaddr, len, bfd_section)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     asection *bfd_section;
+{
+  int status;
+  status = target_read_memory_section (memaddr, myaddr, len, bfd_section);
+  if (status != 0)
+    memory_error (status, memaddr);
+}
+
+/* Like target_read_memory, but slightly different parameters.  */
+
+int
+dis_asm_read_memory (memaddr, myaddr, len, info)
+     bfd_vma memaddr;
+     bfd_byte *myaddr;
+     int len;
+     disassemble_info *info;
+{
+  return target_read_memory (memaddr, (char *) myaddr, len);
+}
+
+/* Like memory_error with slightly different parameters.  */
+void
+dis_asm_memory_error (status, memaddr, info)
+     int status;
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  memory_error (status, memaddr);
+}
+
+/* Like print_address with slightly different parameters.  */
+void
+dis_asm_print_address (addr, info)
+     bfd_vma addr;
+     struct disassemble_info *info;
+{
+  print_address (addr, info->stream);
+}
+
+/* Same as target_write_memory, but report an error if can't write.  */
+void
+write_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int status;
+
+  status = target_write_memory (memaddr, myaddr, len);
+  if (status != 0)
+    memory_error (status, memaddr);
+}
+
+/* Read an integer from debugged memory, given address and number of bytes.  */
+
+LONGEST
+read_memory_integer (memaddr, len)
+     CORE_ADDR memaddr;
+     int len;
+{
+  char buf[sizeof (LONGEST)];
+
+  read_memory (memaddr, buf, len);
+  return extract_signed_integer (buf, len);
+}
+
+ULONGEST
+read_memory_unsigned_integer (memaddr, len)
+     CORE_ADDR memaddr;
+     int len;
+{
+  char buf[sizeof (ULONGEST)];
+
+  read_memory (memaddr, buf, len);
+  return extract_unsigned_integer (buf, len);
+}
+
+void
+read_memory_string (memaddr, buffer, max_len)
+     CORE_ADDR memaddr;
+     char * buffer;
+     int max_len;
+{
+  register char * cp;
+  register int i;
+  int cnt;
+
+  cp = buffer;
+  while (1)
+    {
+      if (cp - buffer >= max_len)
+        {
+          buffer[max_len - 1] = '\0';
+          break;
+        }
+      cnt = max_len - (cp - buffer);
+      if (cnt > 8)
+	cnt = 8;
+      read_memory (memaddr + (int) (cp - buffer), cp, cnt);
+      for (i = 0; i < cnt && *cp; i++, cp++)
+        ; /* null body */
+
+      if (i < cnt && !*cp)
+        break;
+    }
+}
+
+
+#if 0
+/* Enable after 4.12.  It is not tested.  */
+
+/* Search code.  Targets can just make this their search function, or
+   if the protocol has a less general search function, they can call this
+   in the cases it can't handle.  */
+void
+generic_search (len, data, mask, startaddr, increment, lorange, hirange
+		addr_found, data_found)
+     int len;
+     char *data;
+     char *mask;
+     CORE_ADDR startaddr;
+     int increment;
+     CORE_ADDR lorange;
+     CORE_ADDR hirange;
+     CORE_ADDR *addr_found;
+     char *data_found;
+{
+  int i;
+  CORE_ADDR curaddr = startaddr;
+
+  while (curaddr >= lorange && curaddr < hirange)
+    {
+      read_memory (curaddr, data_found, len);
+      for (i = 0; i < len; ++i)
+	if ((data_found[i] & mask[i]) != data[i])
+	  goto try_again;
+      /* It matches.  */
+      *addr_found = curaddr;
+      return;
+
+    try_again:
+      curaddr += increment;
+    }
+  *addr_found = (CORE_ADDR)0;
+  return;
+}
+#endif /* 0 */
+
+/* The current default bfd target.  Points to storage allocated for
+   gnutarget_string.  */
+char *gnutarget;
+
+/* Same thing, except it is "auto" not NULL for the default case.  */
+static char *gnutarget_string;
+
+static void set_gnutarget_command
+  PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+set_gnutarget_command (ignore, from_tty, c)
+     char *ignore;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (STREQ (gnutarget_string, "auto"))
+    gnutarget = NULL;
+  else
+    gnutarget = gnutarget_string;
+}
+
+/* Set the gnutarget.  */
+void
+set_gnutarget (newtarget)
+     char *newtarget;
+{
+  if (gnutarget_string != NULL)
+    free (gnutarget_string);
+  gnutarget_string = savestring (newtarget, strlen (newtarget));
+  set_gnutarget_command (NULL, 0, NULL);
+}
+
+void
+_initialize_core()
+{
+  struct cmd_list_element *c;
+  c = add_cmd ("core-file", class_files, core_file_command,
+	       "Use FILE as core dump for examining memory and registers.\n\
+No arg means have no core file.  This command has been superseded by the\n\
+`target core' and `detach' commands.", &cmdlist);
+  c->completer = filename_completer;
+
+  c = add_set_cmd ("gnutarget", class_files, var_string_noescape,
+		  (char *) &gnutarget_string,
+		  "Set the current BFD target.\n\
+Use `set gnutarget auto' to specify automatic detection.",
+		  &setlist);
+  c->function.sfunc = set_gnutarget_command;
+  add_show_from_set (c, &showlist);
+
+  if (getenv ("GNUTARGET"))
+    set_gnutarget (getenv ("GNUTARGET"));
+  else
+    set_gnutarget ("auto");
+}
diff --git a/gdb/corelow.c b/gdb/corelow.c
new file mode 100644
index 0000000..e635257
--- /dev/null
+++ b/gdb/corelow.c
@@ -0,0 +1,511 @@
+/* Core dump and executable file functions below target vector, for GDB.
+   Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include "frame.h"  /* required by inferior.h */
+#include "inferior.h"
+#include "symtab.h"
+#include "command.h"
+#include "bfd.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "gdbthread.h"
+
+/* List of all available core_fns.  On gdb startup, each core file register
+   reader calls add_core_fns() to register information on each core format it
+   is prepared to read. */
+
+static struct core_fns *core_file_fns = NULL;
+
+static void core_files_info PARAMS ((struct target_ops *));
+
+#ifdef SOLIB_ADD
+static int solib_add_stub PARAMS ((PTR));
+#endif
+
+static void core_open PARAMS ((char *, int));
+
+static void core_detach PARAMS ((char *, int));
+
+static void core_close PARAMS ((int));
+
+static void get_core_registers PARAMS ((int));
+
+static void add_to_thread_list PARAMS ((bfd *, asection *, PTR));
+
+static int ignore PARAMS ((CORE_ADDR, char *));
+
+static char *core_file_to_sym_file PARAMS ((char *));
+
+static int core_file_thread_alive PARAMS ((int tid));
+
+static void init_core_ops PARAMS ((void));
+
+void _initialize_corelow PARAMS ((void));
+
+struct target_ops core_ops;
+
+/* Link a new core_fns into the global core_file_fns list.  Called on gdb
+   startup by the _initialize routine in each core file register reader, to
+   register information about each format the the reader is prepared to
+   handle. */
+
+void
+add_core_fns (cf)
+     struct core_fns *cf;
+{
+  cf -> next = core_file_fns;
+  core_file_fns = cf;
+}
+
+
+/* Discard all vestiges of any previous core file and mark data and stack
+   spaces as empty.  */
+
+/* ARGSUSED */
+static void
+core_close (quitting)
+     int quitting;
+{
+  char *name;
+
+  if (core_bfd)
+    {
+      inferior_pid = 0;		/* Avoid confusion from thread stuff */
+
+      name = bfd_get_filename (core_bfd);
+      if (!bfd_close (core_bfd))
+	warning ("cannot close \"%s\": %s",
+		 name, bfd_errmsg (bfd_get_error ()));
+      free (name);
+      core_bfd = NULL;
+#ifdef CLEAR_SOLIB
+      CLEAR_SOLIB ();
+#endif
+      if (core_ops.to_sections)
+	{
+	  free ((PTR)core_ops.to_sections);
+	  core_ops.to_sections = NULL;
+	  core_ops.to_sections_end = NULL;
+	}
+    }
+}
+
+#ifdef SOLIB_ADD
+/* Stub function for catch_errors around shared library hacking.  FROM_TTYP
+   is really an int * which points to from_tty.  */
+
+static int 
+solib_add_stub (from_ttyp)
+     PTR from_ttyp;
+{
+  SOLIB_ADD (NULL, *(int *)from_ttyp, &current_target);
+  re_enable_breakpoints_in_shlibs ();
+  return 0;
+}
+#endif /* SOLIB_ADD */
+
+/* Look for sections whose names start with `.reg/' so that we can extract the
+   list of threads in a core file.  */
+
+static void
+add_to_thread_list (abfd, asect, reg_sect_arg)
+     bfd *abfd;
+     asection *asect;
+     PTR reg_sect_arg;
+{
+  int thread_id;
+  asection *reg_sect = (asection *) reg_sect_arg;
+
+  if (strncmp (bfd_section_name (abfd, asect), ".reg/", 5) != 0)
+    return;
+
+  thread_id = atoi (bfd_section_name (abfd, asect) + 5);
+
+  add_thread (thread_id);
+
+/* Warning, Will Robinson, looking at BFD private data! */
+
+  if (reg_sect != NULL
+      && asect->filepos == reg_sect->filepos) /* Did we find .reg? */
+    inferior_pid = thread_id;	/* Yes, make it current */
+}
+
+/* This routine opens and sets up the core file bfd.  */
+
+static void
+core_open (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  const char *p;
+  int siggy;
+  struct cleanup *old_chain;
+  char *temp;
+  bfd *temp_bfd;
+  int ontop;
+  int scratch_chan;
+
+  target_preopen (from_tty);
+  if (!filename)
+    {
+      error (core_bfd ? 
+       "No core file specified.  (Use `detach' to stop debugging a core file.)"
+     : "No core file specified.");
+    }
+
+  filename = tilde_expand (filename);
+  if (filename[0] != '/')
+    {
+      temp = concat (current_directory, "/", filename, NULL);
+      free (filename);
+      filename = temp;
+    }
+
+  old_chain = make_cleanup (free, filename);
+
+  scratch_chan = open (filename, write_files ? O_RDWR : O_RDONLY, 0);
+  if (scratch_chan < 0)
+    perror_with_name (filename);
+
+  temp_bfd = bfd_fdopenr (filename, gnutarget, scratch_chan);
+  if (temp_bfd == NULL)
+    perror_with_name (filename);
+
+  if (!bfd_check_format (temp_bfd, bfd_core))
+    {
+      /* Do it after the err msg */
+      /* FIXME: should be checking for errors from bfd_close (for one thing,
+	 on error it does not free all the storage associated with the
+	 bfd).  */
+      make_cleanup ((make_cleanup_func) bfd_close, temp_bfd);
+      error ("\"%s\" is not a core dump: %s",
+	     filename, bfd_errmsg (bfd_get_error ()));
+    }
+
+  /* Looks semi-reasonable.  Toss the old core file and work on the new.  */
+
+  discard_cleanups (old_chain);		/* Don't free filename any more */
+  unpush_target (&core_ops);
+  core_bfd = temp_bfd;
+  old_chain = make_cleanup ((make_cleanup_func) core_close, core_bfd);
+
+  validate_files ();
+
+  /* Find the data section */
+  if (build_section_table (core_bfd, &core_ops.to_sections,
+			   &core_ops.to_sections_end))
+    error ("\"%s\": Can't find sections: %s",
+	   bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
+
+  ontop = !push_target (&core_ops);
+  discard_cleanups (old_chain);
+
+  p = bfd_core_file_failing_command (core_bfd);
+  if (p)
+    printf_filtered ("Core was generated by `%s'.\n", p);
+
+  siggy = bfd_core_file_failing_signal (core_bfd);
+  if (siggy > 0)
+    printf_filtered ("Program terminated with signal %d, %s.\n", siggy,
+		     safe_strsignal (siggy));
+
+  /* Build up thread list from BFD sections. */
+
+  init_thread_list ();
+  bfd_map_over_sections (core_bfd, add_to_thread_list,
+			 bfd_get_section_by_name (core_bfd, ".reg"));
+
+  if (ontop)
+    {
+      /* Fetch all registers from core file.  */
+      target_fetch_registers (-1);
+
+      /* Add symbols and section mappings for any shared libraries.  */
+#ifdef SOLIB_ADD
+      catch_errors (solib_add_stub, &from_tty, (char *)0,
+		    RETURN_MASK_ALL);
+#endif
+
+      /* Now, set up the frame cache, and print the top of stack.  */
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+      print_stack_frame (selected_frame, selected_frame_level, 1);
+    }
+  else
+    {
+      warning (
+"you won't be able to access this core file until you terminate\n\
+your %s; do ``info files''", target_longname);
+    }
+}
+
+static void
+core_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    error ("Too many arguments");
+  unpush_target (&core_ops);
+  reinit_frame_cache ();
+  if (from_tty)
+    printf_filtered ("No core file now.\n");
+}
+
+/* Get the registers out of a core file.  This is the machine-
+   independent part.  Fetch_core_registers is the machine-dependent
+   part, typically implemented in the xm-file for each architecture.  */
+
+/* We just get all the registers, so we don't use regno.  */
+
+/* ARGSUSED */
+static void
+get_core_registers (regno)
+     int regno;
+{
+  sec_ptr reg_sec;
+  unsigned size;
+  char *the_regs;
+  char secname[30];
+  enum bfd_flavour our_flavour = bfd_get_flavour (core_bfd);
+  struct core_fns *cf = NULL;
+
+  if (core_file_fns == NULL)
+    {
+      fprintf_filtered (gdb_stderr,
+			"Can't fetch registers from this type of core file\n");
+      return;
+    }
+
+  /* Thread support.  If inferior_pid is non-zero, then we have found a core
+     file with threads (or multiple processes).  In that case, we need to
+     use the appropriate register section, else we just use `.reg'. */
+
+  /* XXX - same thing needs to be done for floating-point (.reg2) sections. */
+
+  if (inferior_pid)
+    sprintf (secname, ".reg/%d", inferior_pid);
+  else
+    strcpy (secname, ".reg");
+
+  reg_sec = bfd_get_section_by_name (core_bfd, secname);
+  if (!reg_sec)
+    goto cant;
+  size = bfd_section_size (core_bfd, reg_sec);
+  the_regs = alloca (size);
+  /* Look for the core functions that match this flavor.  Default to the
+     first one if nothing matches. */
+  for (cf = core_file_fns; cf != NULL; cf = cf -> next)
+    {
+      if (our_flavour == cf -> core_flavour)
+	{
+	  break;
+	}
+    }
+  if (cf == NULL)
+    {
+      cf = core_file_fns;
+    }
+  if (cf != NULL &&
+      bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr)0, size) &&
+      cf -> core_read_registers != NULL)
+    {
+      (cf -> core_read_registers (the_regs, size, 0,
+				  (unsigned) bfd_section_vma (abfd,reg_sec)));
+    }
+  else
+    {
+cant:
+      fprintf_filtered (gdb_stderr,
+			"Couldn't fetch registers from core file: %s\n",
+			bfd_errmsg (bfd_get_error ()));
+    }
+
+  /* Now do it again for the float registers, if they exist.  */
+  reg_sec = bfd_get_section_by_name (core_bfd, ".reg2");
+  if (reg_sec)
+    {
+      size = bfd_section_size (core_bfd, reg_sec);
+      the_regs = alloca (size);
+      if (cf != NULL &&
+	  bfd_get_section_contents (core_bfd, reg_sec, the_regs, (file_ptr)0, size) &&
+	  cf -> core_read_registers != NULL)
+	{
+	  (cf -> core_read_registers (the_regs, size, 2,
+				      (unsigned) bfd_section_vma (abfd,reg_sec)));
+	}
+      else
+	{
+	  fprintf_filtered (gdb_stderr, 
+			    "Couldn't fetch register set 2 from core file: %s\n",
+			    bfd_errmsg (bfd_get_error ()));
+	}
+    }
+  registers_fetched ();
+}
+
+static char *
+core_file_to_sym_file (core)
+  char *  core;
+{
+  CONST char *  failing_command;
+  char *  p;
+  char *  temp;
+  bfd *  temp_bfd;
+  int  scratch_chan;
+
+  if (! core)
+    error ("No core file specified.");
+
+  core = tilde_expand (core);
+  if (core[0] != '/')
+    {
+      temp = concat (current_directory, "/", core, NULL);
+      core = temp;
+    }
+
+  scratch_chan = open (core, write_files ? O_RDWR : O_RDONLY, 0);
+  if (scratch_chan < 0)
+    perror_with_name (core);
+
+  temp_bfd = bfd_fdopenr (core, gnutarget, scratch_chan);
+  if (temp_bfd == NULL)
+    perror_with_name (core);
+
+  if (!bfd_check_format (temp_bfd, bfd_core))
+    {
+      /* Do it after the err msg */
+      /* FIXME: should be checking for errors from bfd_close (for one thing,
+	 on error it does not free all the storage associated with the
+	 bfd).  */
+      make_cleanup ((make_cleanup_func) bfd_close, temp_bfd);
+      error ("\"%s\" is not a core dump: %s",
+	     core, bfd_errmsg (bfd_get_error ()));
+    }
+
+  /* Find the data section */
+  if (build_section_table (temp_bfd, &core_ops.to_sections,
+			   &core_ops.to_sections_end))
+    error ("\"%s\": Can't find sections: %s",
+	   bfd_get_filename (temp_bfd), bfd_errmsg (bfd_get_error ()));
+
+  failing_command = bfd_core_file_failing_command (temp_bfd);
+
+  bfd_close (temp_bfd);
+
+  /* If we found a filename, remember that it is probably saved
+     relative to the executable that created it.  If working directory
+     isn't there now, we may not be able to find the executable.  Rather
+     than trying to be sauve about finding it, just check if the file
+     exists where we are now.  If not, then punt and tell our client
+     we couldn't find the sym file.
+     */
+  p = (char *) failing_command;
+  if ((p != NULL) && (access (p, F_OK) != 0))
+    p = NULL;
+
+  return p;
+}
+
+static void
+core_files_info (t)
+  struct target_ops *t;
+{
+  print_section_info (t, core_bfd);
+}
+
+/* If mourn is being called in all the right places, this could be say
+   `gdb internal error' (since generic_mourn calls breakpoint_init_inferior).  */
+
+static int
+ignore (addr, contents)
+     CORE_ADDR addr;
+     char *contents;
+{
+  return 0;
+}
+
+
+/* Okay, let's be honest: threads gleaned from a core file aren't
+   exactly lively, are they?  On the other hand, if we don't claim
+   that each & every one is alive, then we don't get any of them
+   to appear in an "info thread" command, which is quite a useful
+   behaviour.
+   */
+static int
+core_file_thread_alive (tid)
+  int  tid;
+{
+  return 1;
+}
+
+/* Fill in core_ops with its defined operations and properties.  */
+
+static void
+init_core_ops ()
+{
+  core_ops.to_shortname = "core";
+  core_ops.to_longname = "Local core dump file";
+  core_ops.to_doc =
+    "Use a core file as a target.  Specify the filename of the core file.";
+  core_ops.to_open = core_open;
+  core_ops.to_close = core_close;
+  core_ops.to_attach = find_default_attach;
+  core_ops.to_require_attach = find_default_require_attach;
+  core_ops.to_detach = core_detach;
+  core_ops.to_require_detach = find_default_require_detach;
+  core_ops.to_fetch_registers = get_core_registers;
+  core_ops.to_xfer_memory = xfer_memory;
+  core_ops.to_files_info = core_files_info;
+  core_ops.to_insert_breakpoint = ignore;
+  core_ops.to_remove_breakpoint = ignore;
+  core_ops.to_create_inferior = find_default_create_inferior;
+  core_ops.to_clone_and_follow_inferior = find_default_clone_and_follow_inferior;
+  core_ops.to_thread_alive = core_file_thread_alive;
+  core_ops.to_core_file_to_sym_file = core_file_to_sym_file;
+  core_ops.to_stratum = core_stratum;
+  core_ops.to_has_memory = 1;
+  core_ops.to_has_stack = 1;
+  core_ops.to_has_registers = 1;
+  core_ops.to_magic = OPS_MAGIC;	
+}
+
+/* non-zero if we should not do the add_target call in
+   _initialize_corelow; not initialized (i.e., bss) so that
+   the target can initialize it (i.e., data) if appropriate.
+   This needs to be set at compile time because we don't know
+   for sure whether the target's initialize routine is called
+   before us or after us. */
+int coreops_suppress_target;
+
+void
+_initialize_corelow ()
+{
+  init_core_ops ();
+
+  if (!coreops_suppress_target)
+    add_target (&core_ops);
+}
diff --git a/gdb/cp-valprint.c b/gdb/cp-valprint.c
new file mode 100644
index 0000000..eeeb79e
--- /dev/null
+++ b/gdb/cp-valprint.c
@@ -0,0 +1,826 @@
+/* Support for printing C++ values for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1994, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "demangle.h"
+#include "annotate.h"
+#include "gdb_string.h"
+#include "c-lang.h"
+#include "target.h"
+
+/* Indication of presence of HP-compiled object files */ 
+extern int hp_som_som_object_present; /* defined in symtab.c */
+
+
+int vtblprint;			/* Controls printing of vtbl's */
+int objectprint;		/* Controls looking up an object's derived type
+				   using what we find in its vtables.  */
+int static_field_print;	/* Controls printing of static fields. */
+
+static struct obstack dont_print_vb_obstack;
+static struct obstack dont_print_statmem_obstack;
+
+static void
+cp_print_static_field PARAMS ((struct type *, value_ptr, GDB_FILE *, int, int,
+			       enum val_prettyprint));
+
+static void
+cp_print_value PARAMS ((struct type *, struct type *, char *, int, CORE_ADDR, GDB_FILE *,
+			int, int, enum val_prettyprint, struct type **));
+
+static void
+cp_print_hpacc_virtual_table_entries PARAMS ((struct type *, int *, value_ptr, GDB_FILE *,
+                                              int, int, enum val_prettyprint));
+
+
+void
+cp_print_class_method (valaddr, type, stream)
+     char *valaddr;
+     struct type *type;
+     GDB_FILE *stream;
+{
+  struct type *domain;
+  struct fn_field *f = NULL;
+  int j = 0;
+  int len2;
+  int offset;
+  char *kind = "";
+  CORE_ADDR addr;
+  struct symbol *sym;
+  unsigned len;
+  unsigned int i;
+  struct type *target_type = check_typedef (TYPE_TARGET_TYPE (type));
+
+  domain = TYPE_DOMAIN_TYPE (target_type);
+  if (domain == (struct type *)NULL)
+    {
+      fprintf_filtered (stream, "<unknown>");
+      return;
+    }
+  addr = unpack_pointer (lookup_pointer_type (builtin_type_void), valaddr);
+  if (METHOD_PTR_IS_VIRTUAL (addr))
+    {
+      offset = METHOD_PTR_TO_VOFFSET (addr);
+      len = TYPE_NFN_FIELDS (domain);
+      for (i = 0; i < len; i++)
+	{
+	  f = TYPE_FN_FIELDLIST1 (domain, i);
+	  len2 = TYPE_FN_FIELDLIST_LENGTH (domain, i);
+	  
+	  for (j = 0; j < len2; j++)
+	    {
+	      QUIT;
+	      if (TYPE_FN_FIELD_VOFFSET (f, j) == offset)
+		{
+		  if (TYPE_FN_FIELD_STUB (f, j))
+		    check_stub_method (domain, i, j);
+		  kind = "virtual ";
+		  goto common;
+		}
+	    }
+	}
+    }
+  else
+    {
+      sym = find_pc_function (addr);
+      if (sym == 0)
+	{
+          /* 1997-08-01 Currently unsupported with HP aCC */
+          if (hp_som_som_object_present)
+            {
+              fputs_filtered ("?? <not supported with HP aCC>", stream);
+              return;
+            }
+	  error ("invalid pointer to member function");
+	}
+      len = TYPE_NFN_FIELDS (domain);
+      for (i = 0; i < len; i++)
+	{
+	  f = TYPE_FN_FIELDLIST1 (domain, i);
+	  len2 = TYPE_FN_FIELDLIST_LENGTH (domain, i);
+	  
+	  for (j = 0; j < len2; j++)
+	    {
+	      QUIT;
+	      if (TYPE_FN_FIELD_STUB (f, j))
+		check_stub_method (domain, i, j);
+	      if (STREQ (SYMBOL_NAME (sym), TYPE_FN_FIELD_PHYSNAME (f, j)))
+		{
+		  goto common;
+		}
+	    }
+	}
+    }
+  common:
+  if (i < len)
+    {
+      char *demangled_name;
+
+      fprintf_filtered (stream, "&");
+      fprintf_filtered (stream, kind);
+      demangled_name = cplus_demangle (TYPE_FN_FIELD_PHYSNAME (f, j),
+				       DMGL_ANSI | DMGL_PARAMS);
+      if (demangled_name == NULL)
+	fprintf_filtered (stream, "<badly mangled name %s>",
+			  TYPE_FN_FIELD_PHYSNAME (f, j));
+      else
+	{
+	  fputs_filtered (demangled_name, stream);
+	  free (demangled_name);
+	}
+    }
+  else
+    {
+      fprintf_filtered (stream, "(");
+      type_print (type, "", stream, -1);
+      fprintf_filtered (stream, ") %d", (int) addr >> 3);
+    }
+}
+
+/* This was what it was for gcc 2.4.5 and earlier.  */
+static const char vtbl_ptr_name_old[] =
+  { CPLUS_MARKER,'v','t','b','l','_','p','t','r','_','t','y','p','e', 0 };
+/* It was changed to this after 2.4.5.  */
+const char vtbl_ptr_name[] =
+  { '_','_','v','t','b','l','_','p','t','r','_','t','y','p','e', 0 };
+
+/* HP aCC uses different names */
+const char hpacc_vtbl_ptr_name[] =
+  { '_', '_', 'v', 'f', 'p', 0 };
+const char hpacc_vtbl_ptr_type_name[] =
+  { '_', '_', 'v', 'f', 't', 'y', 'p', 0 };
+
+
+/* Return truth value for assertion that TYPE is of the type
+   "pointer to virtual function".  */
+
+int
+cp_is_vtbl_ptr_type(type)
+     struct type *type;
+{
+  char *typename = type_name_no_tag (type);
+
+  return (typename != NULL
+	  && (STREQ (typename, vtbl_ptr_name)
+	      || STREQ (typename, vtbl_ptr_name_old)));
+}
+
+/* Return truth value for the assertion that TYPE is of the type
+   "pointer to virtual function table".  */
+
+int
+cp_is_vtbl_member(type)
+     struct type *type;
+{
+  if (TYPE_CODE (type) == TYPE_CODE_PTR)
+    {
+      type = TYPE_TARGET_TYPE (type);
+      if (TYPE_CODE (type) == TYPE_CODE_ARRAY)
+	{
+	  type = TYPE_TARGET_TYPE (type);
+	  if (TYPE_CODE (type) == TYPE_CODE_STRUCT /* if not using thunks */
+	      || TYPE_CODE (type) == TYPE_CODE_PTR) /* if using thunks */
+	    {
+	      /* Virtual functions tables are full of pointers
+		 to virtual functions. */
+	      return cp_is_vtbl_ptr_type (type);
+	    }
+	}
+    }
+  return 0;
+}
+
+/* Mutually recursive subroutines of cp_print_value and c_val_print to
+   print out a structure's fields: cp_print_value_fields and cp_print_value.
+  
+   TYPE, VALADDR, ADDRESS, STREAM, RECURSE, and PRETTY have the
+   same meanings as in cp_print_value and c_val_print.
+
+   2nd argument REAL_TYPE is used to carry over the type of the derived
+   class across the recursion to base classes. 
+
+   DONT_PRINT is an array of baseclass types that we
+   should not print, or zero if called from top level.  */
+
+void
+cp_print_value_fields (type, real_type, valaddr, offset, address, stream, format, recurse, pretty,
+		       dont_print_vb, dont_print_statmem)
+     struct type *type;
+     struct type *real_type;
+     char *valaddr;
+     int offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int recurse;
+     enum val_prettyprint pretty;
+     struct type **dont_print_vb;
+     int dont_print_statmem;
+{
+  int i, len, n_baseclasses;
+  struct obstack tmp_obstack;
+  char *last_dont_print = obstack_next_free (&dont_print_statmem_obstack);
+  int fields_seen = 0;
+
+  CHECK_TYPEDEF (type);
+
+  fprintf_filtered (stream, "{");
+  len = TYPE_NFIELDS (type);
+  n_baseclasses = TYPE_N_BASECLASSES (type);
+
+  /* First, print out baseclasses such that we don't print
+     duplicates of virtual baseclasses.  */
+
+  if (n_baseclasses > 0)
+    cp_print_value (type, real_type, valaddr, offset, address, stream,
+		    format, recurse+1, pretty, dont_print_vb);
+
+  /* Second, print out data fields */
+
+  /* If there are no data fields, or if the only field is the
+   * vtbl pointer, skip this part */ 
+  if ((len == n_baseclasses) ||
+      ((len - n_baseclasses == 1) &&
+       TYPE_HAS_VTABLE(type) &&
+       STREQN(TYPE_FIELD_NAME (type, n_baseclasses), hpacc_vtbl_ptr_name, 5)) || 
+      !len)
+    fprintf_filtered (stream, "<No data fields>");
+  else
+    {
+      extern int inspect_it;
+
+      if (dont_print_statmem == 0)
+	{
+	  /* If we're at top level, carve out a completely fresh
+	     chunk of the obstack and use that until this particular
+	     invocation returns.  */
+	  tmp_obstack = dont_print_statmem_obstack;
+	  obstack_finish (&dont_print_statmem_obstack);
+	}
+
+      for (i = n_baseclasses; i < len; i++)
+	{
+	  /* If requested, skip printing of static fields.  */
+	  if (!static_field_print && TYPE_FIELD_STATIC (type, i))
+	    continue;
+
+          /* If a vtable pointer appears, we'll print it out later */ 
+          if (TYPE_HAS_VTABLE(type) && STREQN(TYPE_FIELD_NAME (type, i), hpacc_vtbl_ptr_name, 5))
+            continue;
+  
+	  if (fields_seen)
+	    fprintf_filtered (stream, ", ");
+	  else if (n_baseclasses > 0)
+	    {
+	      if (pretty)
+		{
+		  fprintf_filtered (stream, "\n");
+		  print_spaces_filtered (2 + 2 * recurse, stream);
+		  fputs_filtered ("members of ", stream);
+		  fputs_filtered (type_name_no_tag (type), stream);
+		  fputs_filtered (": ", stream);
+		}
+	    }
+	  fields_seen = 1;
+
+	  if (pretty)
+	    {
+	      fprintf_filtered (stream, "\n");
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  else 
+	    {
+	      wrap_here (n_spaces (2 + 2 * recurse));
+	    }
+	  if (inspect_it)
+	    {
+	      if (TYPE_CODE (TYPE_FIELD_TYPE (type, i)) == TYPE_CODE_PTR)
+		fputs_filtered ("\"( ptr \"", stream);
+	      else
+		fputs_filtered ("\"( nodef \"", stream);
+	      if (TYPE_FIELD_STATIC (type, i))
+		fputs_filtered ("static ", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      fputs_filtered ("\" \"", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      fputs_filtered ("\") \"", stream);
+	    }
+	  else
+	    {
+	      annotate_field_begin (TYPE_FIELD_TYPE (type, i));
+
+	      if (TYPE_FIELD_STATIC (type, i))
+		fputs_filtered ("static ", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      annotate_field_name_end ();
+	      /* do not print leading '=' in case of anonymous unions */
+	      if (strcmp (TYPE_FIELD_NAME (type, i), ""))
+		fputs_filtered (" = ", stream);
+	      annotate_field_value ();
+	    }
+
+	  if (!TYPE_FIELD_STATIC (type, i) && TYPE_FIELD_PACKED (type, i))
+	    {
+	      value_ptr v;
+
+	      /* Bitfields require special handling, especially due to byte
+		 order problems.  */
+	      if (TYPE_FIELD_IGNORE (type, i))
+		{
+		   fputs_filtered ("<optimized out or zero length>", stream);
+		}
+	      else
+		{
+	           v = value_from_longest (TYPE_FIELD_TYPE (type, i),
+				   unpack_field_as_long (type, valaddr + offset, i));
+
+                   val_print (TYPE_FIELD_TYPE(type, i), VALUE_CONTENTS (v), 0, 0,
+			      stream, format, 0, recurse + 1, pretty);
+		}
+	    }
+	  else
+	    {
+	      if (TYPE_FIELD_IGNORE (type, i))
+		{
+		   fputs_filtered ("<optimized out or zero length>", stream);
+		}
+	      else if (TYPE_FIELD_STATIC (type, i))
+		{
+		  value_ptr v = value_static_field (type, i);
+		  if (v == NULL)
+		    fputs_filtered ("<optimized out>", stream);
+		  else
+		    cp_print_static_field (TYPE_FIELD_TYPE (type, i), v,
+					   stream, format, recurse + 1,
+					   pretty);
+		}
+	      else
+		{
+	           val_print (TYPE_FIELD_TYPE (type, i), 
+			      valaddr, offset + TYPE_FIELD_BITPOS (type, i) / 8,
+			      address + TYPE_FIELD_BITPOS (type, i) / 8,
+			      stream, format, 0, recurse + 1, pretty);
+		}
+	    }
+	  annotate_field_end ();
+	}
+
+      if (dont_print_statmem == 0)
+	{
+	  /* Free the space used to deal with the printing
+	     of the members from top level.  */
+	  obstack_free (&dont_print_statmem_obstack, last_dont_print);
+	  dont_print_statmem_obstack = tmp_obstack;
+	}
+
+      if (pretty)
+	{
+	  fprintf_filtered (stream, "\n");
+	  print_spaces_filtered (2 * recurse, stream);
+	}
+    } /* if there are data fields */
+  /* Now print out the virtual table pointer if there is one */ 
+  if (TYPE_HAS_VTABLE(type) && STREQN(TYPE_FIELD_NAME (type, n_baseclasses), hpacc_vtbl_ptr_name, 5))
+    {
+      value_ptr v;
+      /* First get the virtual table pointer and print it out*/ 
+
+#if 0
+      fputs_filtered ("__vfp = ", stream);
+#endif
+
+      fputs_filtered (", Virtual table at ", stream);
+
+      /* pai: FIXME 32x64 problem? */
+      /* Not sure what the best notation is in the case where there is no
+         baseclass name.  */
+      v = value_from_longest (lookup_pointer_type (builtin_type_unsigned_long),
+                              * (unsigned long *) (valaddr + offset));
+
+      val_print (VALUE_TYPE (v), VALUE_CONTENTS (v), 0, 0,
+                 stream, format, 0, recurse + 1, pretty);
+      fields_seen = 1;
+
+      if (vtblprint)
+        {
+          /* Print out function pointers in vtable. */
+
+          /* FIXME: then-clause is for non-RRBC layout of virtual
+           * table.  The RRBC case in the else-clause is yet to be
+           * implemented.  The if (1) below should be changed to a
+           * test for whether the executable we have was compiled
+           * with a version of HP aCC that doesn't have RRBC
+           * support. */
+
+          if (1) 
+            {
+              /* no RRBC support; function pointers embedded directly in vtable */
+
+              int vfuncs = count_virtual_fns (real_type);
+
+              fputs_filtered (" {", stream);
+
+              /* FIXME : doesn't work at present */           
+#if 0
+              fprintf_filtered (stream, "%d entr%s: ", vfuncs, vfuncs == 1 ? "y" : "ies");
+#else
+              fputs_filtered ("not implemented", stream);
+
+
+#endif
+
+              /* recursive function that prints all virtual function entries */ 
+#if 0
+              cp_print_hpacc_virtual_table_entries (real_type, &vfuncs, v, stream, format, recurse, pretty);
+#endif
+              fputs_filtered ("}", stream);
+            } /* non-RRBC case */
+          else
+            {
+              /* FIXME -- seem comments above */ 
+              /* RRBC support present; function pointers are found
+               * by indirection through the class segment entries. */
+
+              
+            } /* RRBC case */ 
+        } /* if vtblprint */ 
+
+      if (pretty)
+	{
+	  fprintf_filtered (stream, "\n");
+	  print_spaces_filtered (2 * recurse, stream);
+	}
+
+    } /* if vtable exists */ 
+  
+  fprintf_filtered (stream, "}");
+}
+
+/* Special val_print routine to avoid printing multiple copies of virtual
+   baseclasses.  */
+
+static void
+cp_print_value (type, real_type, valaddr, offset, address, stream, format, recurse, pretty,
+		dont_print_vb)
+     struct type *type;
+     struct type *real_type;
+     char *valaddr;
+     int offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int recurse;
+     enum val_prettyprint pretty;
+     struct type **dont_print_vb;
+{
+  struct obstack tmp_obstack;
+  struct type **last_dont_print
+    = (struct type **)obstack_next_free (&dont_print_vb_obstack);
+  int i, n_baseclasses = TYPE_N_BASECLASSES (type);
+
+  if (dont_print_vb == 0)
+    {
+      /* If we're at top level, carve out a completely fresh
+	 chunk of the obstack and use that until this particular
+	 invocation returns.  */
+      tmp_obstack = dont_print_vb_obstack;
+      /* Bump up the high-water mark.  Now alpha is omega.  */
+      obstack_finish (&dont_print_vb_obstack);
+    }
+
+  for (i = 0; i < n_baseclasses; i++)
+    {
+      int boffset;
+      int skip;
+      struct type *baseclass = check_typedef (TYPE_BASECLASS (type, i));
+      char *basename = TYPE_NAME (baseclass);
+      char *base_valaddr;
+
+      if (BASETYPE_VIA_VIRTUAL (type, i))
+	{
+	  struct type **first_dont_print
+	    = (struct type **)obstack_base (&dont_print_vb_obstack);
+
+	  int j = (struct type **)obstack_next_free (&dont_print_vb_obstack)
+	    - first_dont_print;
+
+	  while (--j >= 0)
+	    if (baseclass == first_dont_print[j])
+	      goto flush_it;
+
+	  obstack_ptr_grow (&dont_print_vb_obstack, baseclass);
+	}
+
+      if (TYPE_HAS_VTABLE (type) && BASETYPE_VIA_VIRTUAL (type, i))
+        {
+          /* Assume HP/Taligent runtime convention */ 
+          find_rt_vbase_offset (type, TYPE_BASECLASS (type, i),
+                                valaddr, offset, &boffset, &skip);
+          if (skip >= 0)
+            error ("Virtual base class offset not found from vtable while printing");
+          base_valaddr = valaddr;
+        }
+      else
+        {
+          boffset = baseclass_offset (type, i , valaddr + offset, address + offset);
+          skip = ((boffset == -1) || (boffset+offset) < 0 ) ? 1 : -1;
+
+          if (BASETYPE_VIA_VIRTUAL (type, i))
+            {
+              /* The virtual base class pointer might have been clobbered by the
+	         user program. Make sure that it still points to a valid memory
+	         location.  */
+
+             if (boffset != -1 && ((boffset+offset) < 0 || (boffset+offset) >= TYPE_LENGTH (type)))
+	       {
+	         base_valaddr = (char *) alloca (TYPE_LENGTH (baseclass));
+	         if (target_read_memory (address + boffset, base_valaddr,
+	    			      TYPE_LENGTH (baseclass)) != 0)
+	           skip = 1;
+	       }
+             else
+               base_valaddr = valaddr;
+            }
+          else
+             base_valaddr = valaddr;
+	}
+
+      /* now do the printing */
+      if (pretty)
+	{
+	  fprintf_filtered (stream, "\n");
+	  print_spaces_filtered (2 * recurse, stream);
+	}
+      fputs_filtered ("<", stream);
+      /* Not sure what the best notation is in the case where there is no
+	 baseclass name.  */
+      fputs_filtered (basename ? basename : "", stream);
+      fputs_filtered ("> = ", stream);
+
+
+      if (skip >= 1)
+	fprintf_filtered (stream, "<invalid address>");
+      else
+	cp_print_value_fields (baseclass, real_type, base_valaddr, offset + boffset, address,
+			       stream, format, recurse, pretty,
+			       (struct type **) obstack_base (&dont_print_vb_obstack),
+			       0);
+      fputs_filtered (", ", stream);
+
+    flush_it:
+      ;
+    }
+
+  if (dont_print_vb == 0)
+    {
+      /* Free the space used to deal with the printing
+	 of this type from top level.  */
+      obstack_free (&dont_print_vb_obstack, last_dont_print);
+      /* Reset watermark so that we can continue protecting
+	 ourselves from whatever we were protecting ourselves.  */
+      dont_print_vb_obstack = tmp_obstack;
+    }
+}
+
+/* Print value of a static member.
+   To avoid infinite recursion when printing a class that contains
+   a static instance of the class, we keep the addresses of all printed
+   static member classes in an obstack and refuse to print them more
+   than once.
+
+   VAL contains the value to print, TYPE, STREAM, RECURSE, and PRETTY
+   have the same meanings as in c_val_print.  */
+
+static void
+cp_print_static_field (type, val, stream, format, recurse, pretty)
+     struct type *type;
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  if (TYPE_CODE (type) == TYPE_CODE_STRUCT)
+    {
+      CORE_ADDR *first_dont_print;
+      int i;
+
+      first_dont_print
+	= (CORE_ADDR *)obstack_base (&dont_print_statmem_obstack);
+      i = (CORE_ADDR *)obstack_next_free (&dont_print_statmem_obstack)
+	- first_dont_print;
+
+      while (--i >= 0)
+	{
+	  if (VALUE_ADDRESS (val) == first_dont_print[i])
+	    {
+	      fputs_filtered ("<same as static member of an already seen type>",
+			      stream);
+	      return;
+	    }
+	}
+
+      obstack_grow (&dont_print_statmem_obstack, (char *) &VALUE_ADDRESS (val),
+		    sizeof (CORE_ADDR));
+
+      CHECK_TYPEDEF (type);
+      cp_print_value_fields (type, type, VALUE_CONTENTS_ALL (val), VALUE_EMBEDDED_OFFSET (val), VALUE_ADDRESS (val),
+			     stream, format, recurse, pretty, NULL, 1);
+      return;
+    }
+  val_print (type, VALUE_CONTENTS_ALL (val), VALUE_EMBEDDED_OFFSET (val), VALUE_ADDRESS (val),
+	     stream, format, 0, recurse, pretty);
+}
+
+void
+cp_print_class_member (valaddr, domain, stream, prefix)
+     char *valaddr;
+     struct type *domain;
+     GDB_FILE *stream;
+     char *prefix;
+{
+  
+  /* VAL is a byte offset into the structure type DOMAIN.
+     Find the name of the field for that offset and
+     print it.  */
+  int extra = 0;
+  int bits = 0;
+  register unsigned int i;
+  unsigned len = TYPE_NFIELDS (domain);
+
+  /* @@ Make VAL into bit offset */
+
+  /* Note: HP aCC generates offsets that are the real byte offsets added
+     to a constant bias 0x20000000 (1 << 29).  This constant bias gets
+     shifted out in the code below -- joyous happenstance! */
+
+  /* Note: HP cfront uses a constant bias of 1; if we support this
+     compiler ever, we will have to adjust the computation below */ 
+  
+  LONGEST val = unpack_long (builtin_type_int, valaddr) << 3;
+  for (i = TYPE_N_BASECLASSES (domain); i < len; i++)
+    {
+      int bitpos = TYPE_FIELD_BITPOS (domain, i);
+      QUIT;
+      if (val == bitpos)
+	break;
+      if (val < bitpos && i != 0)
+	{
+	  /* Somehow pointing into a field.  */
+	  i -= 1;
+	  extra = (val - TYPE_FIELD_BITPOS (domain, i));
+	  if (extra & 0x7)
+	    bits = 1;
+	  else
+	    extra >>= 3;
+	  break;
+	}
+    }
+  if (i < len)
+    {
+      char *name;
+      fprintf_filtered (stream, prefix);
+      name = type_name_no_tag (domain);
+      if (name)
+        fputs_filtered (name, stream);
+      else
+	c_type_print_base (domain, stream, 0, 0);
+      fprintf_filtered (stream, "::");
+      fputs_filtered (TYPE_FIELD_NAME (domain, i), stream);
+      if (extra)
+	fprintf_filtered (stream, " + %d bytes", extra);
+      if (bits)
+	fprintf_filtered (stream, " (offset in bits)");
+    }
+  else
+    fprintf_filtered (stream, "%d", val >> 3);
+}
+
+
+/* This function prints out virtual table entries for a class; it
+ * recurses on the base classes to find all virtual functions
+ * available in a class.
+ *
+ * pai/1997-05-21 Note: As the name suggests, it's currently
+ * implemented for HP aCC runtime only. g++ objects are handled
+ * differently and I have made no attempt to fold that logic in
+ * here. The runtime layout is different for the two cases.  Also,
+ * this currently has only the code for non-RRBC layouts generated by
+ * the HP aCC compiler; RRBC code is stubbed out and will have to be
+ * added later. */
+ 
+
+static void
+cp_print_hpacc_virtual_table_entries (type, vfuncs, v, stream, format, recurse, pretty)
+  struct type * type;
+  int * vfuncs;
+  value_ptr v;
+  GDB_FILE *stream;
+  int format;
+  int recurse;
+  enum val_prettyprint pretty;
+{
+  int fn, oi;
+
+  /* pai: FIXME this function doesn't work. It should handle a given
+   * virtual function only once (latest redefinition in class hierarchy)
+   */
+
+  /* Recursion on other classes that can share the same vtable */ 
+  struct type * pbc = primary_base_class (type);
+  if (pbc)
+    cp_print_hpacc_virtual_table_entries (pbc, vfuncs, v, stream, format, recurse, pretty);
+      
+  /* Now deal with vfuncs declared in this class */
+  for (fn = 0; fn < TYPE_NFN_FIELDS (type); fn++)
+    for (oi = 0; oi < TYPE_FN_FIELDLIST_LENGTH (type, fn); oi++)
+      if (TYPE_FN_FIELD_VIRTUAL_P (TYPE_FN_FIELDLIST1 (type, fn), oi))
+        {
+          char * vf_name;
+
+          /* virtual function offset */
+          int vx = TYPE_FN_FIELD_VOFFSET (TYPE_FN_FIELDLIST1 (type, fn), oi) - 1;
+
+          /* Get the address of the vfunction entry */ 
+          value_ptr vf = value_copy (v);
+          if (VALUE_LAZY (vf))
+            (void) value_fetch_lazy (vf);
+          vf->aligner.contents[0] += 4 * (HP_ACC_VFUNC_START + vx);  /* adjust by offset */ 
+          vf = value_ind (vf);               /* get the entry */ 
+          VALUE_TYPE (vf) = VALUE_TYPE (v);  /* make it a pointer */ 
+
+          /* print out the entry */ 
+          val_print (VALUE_TYPE (vf), VALUE_CONTENTS (vf), 0, 0,
+                     stream, format, 0, recurse + 1, pretty);
+          vf_name = cplus_demangle (TYPE_FN_FIELD_PHYSNAME (TYPE_FN_FIELDLIST1 (type, fn), oi),
+                                    DMGL_ARM);  /* pai: (temp) FIXME Maybe this should be DMGL_ANSI */
+          fprintf_filtered (stream, " %s", vf_name);
+          if (--(*vfuncs) > 0)
+            fputs_filtered (", ", stream);
+        }
+}
+
+
+
+void
+_initialize_cp_valprint ()
+{
+  add_show_from_set
+    (add_set_cmd ("static-members", class_support, var_boolean,
+		  (char *)&static_field_print,
+		  "Set printing of C++ static members.",
+		  &setprintlist),
+     &showprintlist);
+  /* Turn on printing of static fields.  */
+  static_field_print = 1;
+
+  add_show_from_set
+    (add_set_cmd ("vtbl", class_support, var_boolean, (char *)&vtblprint,
+		  "Set printing of C++ virtual function tables.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("object", class_support, var_boolean, (char *)&objectprint,
+	  "Set printing of object's derived type based on vtable info.",
+		  &setprintlist),
+     &showprintlist);
+
+  /* Give people the defaults which they are used to.  */
+  objectprint = 0;
+  vtblprint = 0;
+  obstack_begin (&dont_print_vb_obstack, 32 * sizeof (struct type *));
+  obstack_specify_allocation (&dont_print_statmem_obstack,
+			      32 * sizeof (CORE_ADDR), sizeof (CORE_ADDR),
+			      xmalloc, free);
+}
diff --git a/gdb/cpu32bug-rom.c b/gdb/cpu32bug-rom.c
new file mode 100644
index 0000000..758c8ca
--- /dev/null
+++ b/gdb/cpu32bug-rom.c
@@ -0,0 +1,167 @@
+/* Remote debugging interface for CPU32Bug Rom monitor for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+   Written by Stu Grossman of Cygnus Support
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void cpu32bug_open PARAMS ((char *args, int from_tty));
+
+static void
+cpu32bug_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+
+  switch (regname[0])
+    {
+    case 'S':
+      if (regname[1] != 'R')
+	return;
+      regno = PS_REGNUM;
+      break;
+    case 'P':
+      if (regname[1] != 'C')
+	return;
+      regno = PC_REGNUM;
+      break;
+    case 'D':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + D0_REGNUM;
+      break;
+    case 'A':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + A0_REGNUM;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/*
+ * This array of registers needs to match the indexes used by GDB. The
+ * whole reason this exists is because the various ROM monitors use
+ * different names than GDB does, and don't support all the
+ * registers either. So, typing "info reg sp" becomes an "A7".
+ */
+
+static char *cpu32bug_regnames[NUM_REGS] =
+{
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+  "SR", "PC",
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops cpu32bug_ops;
+
+static char *cpu32bug_inits[] = {"\r", NULL};
+
+static struct monitor_ops cpu32bug_cmds ;
+
+static void 
+init_cpu32bug_cmds(void)
+{
+  cpu32bug_cmds.flags =   MO_CLR_BREAK_USES_ADDR;
+  cpu32bug_cmds.init =   cpu32bug_inits;		/* Init strings */
+  cpu32bug_cmds.cont =   "g\r";			/* continue command */
+  cpu32bug_cmds.step =   "t\r";			/* single step */
+  cpu32bug_cmds.stop =   NULL;				/* interrupt command */
+  cpu32bug_cmds.set_break =   "br %x\r";			/* set a breakpoint */
+  cpu32bug_cmds.clr_break =   "nobr %x\r";			/* clear a breakpoint */
+  cpu32bug_cmds.clr_all_break =   "nobr\r";			/* clear all breakpoints */
+  cpu32bug_cmds.fill =   "bf %x:%x %x;b\r";		/* fill (start count val) */
+  cpu32bug_cmds.setmem.cmdb =     "ms %x %02x\r";		/* setmem.cmdb (addr, value) */
+  cpu32bug_cmds.setmem.cmdw =     "ms %x %04x\r";		/* setmem.cmdw (addr, value) */
+  cpu32bug_cmds.setmem.cmdl =     "ms %x %08x\r";		/* setmem.cmdl (addr, value) */
+  cpu32bug_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  cpu32bug_cmds.setmem.resp_delim =     NULL;			/* setreg.resp_delim */
+  cpu32bug_cmds.setmem.term =     NULL;			/* setreg.term */
+  cpu32bug_cmds.setmem.term_cmd =     NULL;			/* setreg.term_cmd */
+  cpu32bug_cmds.getmem.cmdb =     "md %x:%x;b\r";		/* getmem.cmdb (addr, len) */
+  cpu32bug_cmds.getmem.cmdw =     "md %x:%x;b\r";		/* getmem.cmdw (addr, len) */
+  cpu32bug_cmds.getmem.cmdl =     "md %x:%x;b\r";		/* getmem.cmdl (addr, len) */
+  cpu32bug_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, len) */
+  cpu32bug_cmds.getmem.resp_delim =     " ";			/* getmem.resp_delim */
+  cpu32bug_cmds.getmem.term =     NULL;			/* getmem.term */
+  cpu32bug_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+  cpu32bug_cmds.setreg.cmd =     "rs %s %x\r";		/* setreg.cmd (name, value) */
+  cpu32bug_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  cpu32bug_cmds.setreg.term =     NULL;			/* setreg.term */
+  cpu32bug_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  cpu32bug_cmds.getreg.cmd =     "rs %s\r";			/* getreg.cmd (name) */
+  cpu32bug_cmds.getreg.resp_delim =     "=";			/* getreg.resp_delim */
+  cpu32bug_cmds.getreg.term =     NULL;			/* getreg.term */
+  cpu32bug_cmds.getreg.term_cmd =     NULL ;			/* getreg.term_cmd */
+  cpu32bug_cmds.dump_registers =   "rd\r";			/* dump_registers */
+  cpu32bug_cmds.register_pattern =   "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  cpu32bug_cmds.supply_register =   cpu32bug_supply_register;	/* supply_register */
+  cpu32bug_cmds.load_routine =   NULL;				/* load_routine (defaults to SRECs) */
+  cpu32bug_cmds.load =   "lo\r";			/* download command */
+  cpu32bug_cmds.loadresp =   "\n";				/* load response */
+  cpu32bug_cmds.prompt =   "CPU32Bug>";			/* monitor command prompt */
+  cpu32bug_cmds.line_term =   "\r";				/* end-of-line terminator */
+  cpu32bug_cmds.cmd_end =   NULL;				/* optional command terminator */
+  cpu32bug_cmds.target =   &cpu32bug_ops;		/* target operations */
+  cpu32bug_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  cpu32bug_cmds.regnames =   cpu32bug_regnames;		/* registers names */
+  cpu32bug_cmds.magic =   MONITOR_OPS_MAGIC;		/* magic */
+}; /* init_cpu32bug_cmds */
+
+static void
+cpu32bug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &cpu32bug_cmds, from_tty);
+}
+
+void
+_initialize_cpu32bug_rom ()
+{
+  init_cpu32bug_cmds() ;
+  init_monitor_ops (&cpu32bug_ops);
+
+  cpu32bug_ops.to_shortname = "cpu32bug";
+  cpu32bug_ops.to_longname = "CPU32Bug monitor";
+  cpu32bug_ops.to_doc = "Debug via the CPU32Bug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  cpu32bug_ops.to_open = cpu32bug_open;
+
+  add_target (&cpu32bug_ops);
+}
diff --git a/gdb/cxux-nat.c b/gdb/cxux-nat.c
new file mode 100644
index 0000000..2c4b6f1
--- /dev/null
+++ b/gdb/cxux-nat.c
@@ -0,0 +1,523 @@
+/* Native support for Motorola 88k running Harris CX/UX.
+   Copyright 1988, 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include "gdbcore.h"
+#include <sys/user.h>
+
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "symtab.h"
+
+#ifndef USER			/* added to support BCS ptrace_user */
+#define USER ptrace_user
+#endif
+#include <sys/ioctl.h>
+#include <fcntl.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#include "symtab.h"
+#include "setjmp.h"
+#include "value.h"
+
+#include <sys/ptrace.h>
+
+/* CX/UX provides them already, but as word offsets instead of char offsets */
+#define SXIP_OFFSET (PT_SXIP * 4)
+#define SNIP_OFFSET (PT_SNIP * 4)
+#define SFIP_OFFSET (PT_SFIP * 4)
+#define PSR_OFFSET  (PT_PSR  * sizeof(int))
+#define FPSR_OFFSET (PT_FPSR * sizeof(int))
+#define FPCR_OFFSET (PT_FPCR * sizeof(int))
+
+#define XREGADDR(r) (((char *)&u.pt_x0-(char *)&u) + \
+                     ((r)-X0_REGNUM)*sizeof(X_REGISTER_RAW_TYPE))
+
+extern int have_symbol_file_p();
+
+extern jmp_buf stack_jmp;
+
+extern int errno;
+extern char registers[REGISTER_BYTES];
+
+void
+fetch_inferior_registers (regno)
+     int regno;		/* Original value discarded */
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  struct USER u;
+  unsigned int offset;
+
+  offset = (char *) &u.pt_r0 - (char *) &u; 
+  regaddr = offset; /* byte offset to r0;*/
+
+/*  offset = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0) - KERNEL_U_ADDR; */
+  for (regno = 0; regno < PC_REGNUM; regno++)
+    {
+      /*regaddr = register_addr (regno, offset);*/
+	/* 88k enhancement  */
+        
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+ 	{
+ 	  *(int *) &buf[i] = ptrace (3, inferior_pid,
+				     (PTRACE_ARG3_TYPE) regaddr, 0);
+ 	  regaddr += sizeof (int);
+ 	}
+      supply_register (regno, buf);
+    }
+    /* now load up registers 32-37; special pc registers */
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) PSR_OFFSET,0);
+    supply_register (PSR_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) FPSR_OFFSET,0);
+    supply_register (FPSR_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) FPCR_OFFSET,0);
+    supply_register (FPCR_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3,inferior_pid,
+			       (PTRACE_ARG3_TYPE) SXIP_OFFSET ,0);
+    supply_register (SXIP_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) SNIP_OFFSET,0);
+    supply_register (SNIP_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) SFIP_OFFSET,0);
+    supply_register (SFIP_REGNUM, buf);
+
+    if (target_is_m88110) 
+      {
+        for (regaddr = XREGADDR(X0_REGNUM), regno = X0_REGNUM;
+             regno < NUM_REGS; 
+             regno++, regaddr += 16)
+          {
+            X_REGISTER_RAW_TYPE xval;
+
+            *(int *) &xval.w1 = ptrace (3, inferior_pid,
+                                        (PTRACE_ARG3_TYPE) regaddr, 0);
+            *(int *) &xval.w2 = ptrace (3, inferior_pid,
+                                        (PTRACE_ARG3_TYPE) (regaddr+4), 0);
+            *(int *) &xval.w3 = ptrace (3, inferior_pid,
+                                        (PTRACE_ARG3_TYPE) (regaddr+8), 0);
+            *(int *) &xval.w4 = ptrace (3, inferior_pid,
+                                        (PTRACE_ARG3_TYPE) (regaddr+12), 0);
+            supply_register(regno, (void *)&xval);
+          }
+      }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  struct USER u;
+
+  unsigned int offset = (char *) &u.pt_r0 - (char *) &u;
+
+  regaddr = offset;
+
+  /* Don't try to deal with EXIP_REGNUM or ENIP_REGNUM, because I think either
+     svr3 doesn't run on an 88110, or the kernel isolates the different (not
+     completely sure this is true, but seems to be.  */
+  if (regno >= 0)
+    {
+      /*      regaddr = register_addr (regno, offset); */
+      if (regno < PC_REGNUM)
+	{ 
+	  regaddr = offset + regno * sizeof (int);
+	  errno = 0;
+	  ptrace (6, inferior_pid,
+		  (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
+	  if (errno != 0)
+	    {
+	      sprintf (buf, "writing register number %d", regno);
+	      perror_with_name (buf);
+	    }
+	}
+      else if (regno == PSR_REGNUM)
+        ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) PSR_OFFSET, read_register(regno));
+      else if (regno == FPSR_REGNUM)
+        ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) FPSR_OFFSET, read_register(regno));
+      else if (regno == FPCR_REGNUM)
+        ptrace (6, inferior_pid,
+	        (PTRACE_ARG3_TYPE) FPCR_OFFSET, read_register(regno));
+      else if (regno == SXIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SXIP_OFFSET, read_register(regno));
+      else if (regno == SNIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SNIP_OFFSET, read_register(regno));
+      else if (regno == SFIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SFIP_OFFSET, read_register(regno));
+      else if (target_is_m88110 && regno < NUM_REGS)
+        {
+          X_REGISTER_RAW_TYPE xval;
+          
+          read_register_bytes(REGISTER_BYTE(regno), (char *)&xval, 
+                              sizeof(X_REGISTER_RAW_TYPE));
+          regaddr = XREGADDR(regno);
+          ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, xval.w1);
+          ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr+4, xval.w2);
+          ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr+8, xval.w3);
+          ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr+12, xval.w4);
+        }
+      else
+	printf_unfiltered ("Bad register number for store_inferior routine\n");
+    }
+  else
+    { 
+      for (regno = 0; regno < PC_REGNUM; regno++)
+	{
+	  /*      regaddr = register_addr (regno, offset); */
+	  errno = 0;
+	  regaddr = offset + regno * sizeof (int);
+	  ptrace (6, inferior_pid,
+		  (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
+	  if (errno != 0)
+	    {
+	      sprintf (buf, "writing register number %d", regno);
+	      perror_with_name (buf);
+	    }
+	}
+      ptrace (6, inferior_pid,
+              (PTRACE_ARG3_TYPE) PSR_OFFSET, read_register(regno));
+      ptrace (6, inferior_pid,
+              (PTRACE_ARG3_TYPE) FPSR_OFFSET,read_register(regno));
+      ptrace (6, inferior_pid,
+              (PTRACE_ARG3_TYPE) FPCR_OFFSET,read_register(regno));
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SXIP_OFFSET,read_register(SXIP_REGNUM));
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SNIP_OFFSET,read_register(SNIP_REGNUM));
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SFIP_OFFSET,read_register(SFIP_REGNUM));
+      if (target_is_m88110)
+        {
+          for (regno = X0_REGNUM; regno < NUM_REGS; regno++) 
+            {
+              X_REGISTER_RAW_TYPE xval;
+     
+              read_register_bytes(REGISTER_BYTE(regno), (char *)&xval, 
+                                  sizeof(X_REGISTER_RAW_TYPE));
+              regaddr = XREGADDR(regno);
+              ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, xval.w1);
+              ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) (regaddr+4), xval.w2);
+              ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) (regaddr+8), xval.w3);
+              ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) (regaddr+12), xval.w4);
+            }
+        }
+    }
+}
+
+/* blockend is the address of the end of the user structure */
+
+m88k_register_u_addr (blockend, regnum)
+     int blockend, regnum;
+{
+  struct USER u;
+  int ustart = blockend - sizeof (struct USER);
+
+  if (regnum < PSR_REGNUM)
+      return (ustart + ((int) &u.pt_r0 - (int) &u) +
+              REGISTER_SIZE * regnum);
+  else if (regnum == PSR_REGNUM)
+      return (ustart + ((int) &u.pt_psr) - (int) &u);
+  else if (regnum == FPSR_REGNUM)
+      return (ustart + ((int) &u.pt_fpsr) - (int) &u);
+  else if (regnum == FPCR_REGNUM)
+      return (ustart + ((int) &u.pt_fpcr) - (int) &u);
+  else if (regnum == SXIP_REGNUM)
+      return (ustart + SXIP_OFFSET);
+  else if (regnum == SNIP_REGNUM)
+      return (ustart + SNIP_OFFSET);
+  else if (regnum == SFIP_REGNUM)
+      return (ustart + SFIP_OFFSET);
+  else if (target_is_m88110) 
+      return (ustart + ((int) &u.pt_x0 - (int) &u) +   /* Must be X register */
+               sizeof(u.pt_x0) * (regnum - X0_REGNUM));
+  else
+      return (blockend + REGISTER_SIZE * regnum);
+}
+
+#ifdef USE_PROC_FS
+
+#include <sys/procfs.h>
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+    register int regi;
+    register greg_t *regp = (greg_t *) gregsetp;
+
+    for (regi=0; regi <= SP_REGNUM; regi++)
+	supply_register (regi, (char *) (regp + regi));
+
+    supply_register (SXIP_REGNUM, (char *) (regp + R_XIP));
+    supply_register (SNIP_REGNUM, (char *) (regp + R_NIP));
+    supply_register (SFIP_REGNUM, (char *) (regp + R_FIP));
+    supply_register (PSR_REGNUM, (char *) (regp + R_PSR));
+    supply_register (FPSR_REGNUM, (char *) (regp + R_FPSR));
+    supply_register (FPCR_REGNUM, (char *) (regp + R_FPCR));
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+    int regi;
+    register greg_t *regp = (greg_t *) gregsetp;
+    extern char registers[];
+
+    for (regi = 0 ; regi <= R_R31 ; regi++)
+	if ((regno == -1) || (regno == regi))
+	    *(regp + regi) = *(int *) &registers[REGISTER_BYTE(regi)];
+
+    if ((regno == -1) || (regno == SXIP_REGNUM))
+	*(regp + R_XIP) = *(int *) &registers[REGISTER_BYTE(SXIP_REGNUM)];
+    if ((regno == -1) || (regno == SNIP_REGNUM))
+	*(regp + R_NIP) = *(int *) &registers[REGISTER_BYTE(SNIP_REGNUM)];
+    if ((regno == -1) || (regno == SFIP_REGNUM))
+	*(regp + R_FIP) = *(int *) &registers[REGISTER_BYTE(SFIP_REGNUM)];
+    if ((regno == -1) || (regno == PSR_REGNUM))
+	*(regp + R_PSR) = *(int *) &registers[REGISTER_BYTE(PSR_REGNUM)];
+    if ((regno == -1) || (regno == FPSR_REGNUM))
+	*(regp + R_FPSR) = *(int *) &registers[REGISTER_BYTE(FPSR_REGNUM)];
+    if ((regno == -1) || (regno == FPCR_REGNUM))
+	*(regp + R_FPCR) = *(int *) &registers[REGISTER_BYTE(FPCR_REGNUM)];
+}
+
+#endif /* USE_PROC_FS */
+
+/* This support adds the equivalent of adb's % command.  When
+   the `add-shared-symbol-files' command is given, this routine scans 
+   the dynamic linker's link map and reads the minimal symbols
+   from each shared object file listed in the map. */
+
+struct link_map {
+  unsigned long l_addr;		/* address at which object is mapped */
+  char *l_name;			/* full name of loaded object */
+  void *l_ld;			/* dynamic structure of object */
+  struct link_map *l_next;	/* next link object */
+  struct link_map *l_prev;	/* previous link object */
+};
+
+#define LINKS_MAP_POINTER "_ld_tail"
+#define LIBC_FILE "/usr/lib/libc.so.1"
+#define SHARED_OFFSET 0xf0001000
+
+#ifndef PATH_MAX
+#define PATH_MAX 1023		/* maximum size of path name on OS */
+#endif
+
+void
+add_shared_symbol_files ()
+{
+  void *desc;
+  struct link_map *ld_map, *lm, lms;
+  struct minimal_symbol *minsym; 
+  struct objfile *objfile;
+  char *path_name;
+
+  if (! inferior_pid)
+    {
+      warning ("The program has not yet been started.");
+      return;
+    }
+
+  objfile = symbol_file_add (LIBC_FILE, 0, 0, 0, 0, 1, 0, 0);
+  minsym = lookup_minimal_symbol (LINKS_MAP_POINTER, objfile);
+
+  ld_map = (struct link_map *)
+    read_memory_integer (((int)SYMBOL_VALUE_ADDRESS(minsym) + SHARED_OFFSET), 4);
+  lm = ld_map;
+  while (lm)
+    {
+      int local_errno = 0;
+
+      read_memory ((CORE_ADDR)lm, (char*)&lms, sizeof (struct link_map));
+      if (lms.l_name)
+	{
+	  if (target_read_string ((CORE_ADDR)lms.l_name, &path_name, 
+                                  PATH_MAX, &local_errno))
+	    {
+	      symbol_file_add (path_name, 1, lms.l_addr, 0, 0, 0, 0, 0);
+              free(path_name);
+	    }
+	}
+      /* traverse links in reverse order so that we get the
+	 the symbols the user actually gets. */
+      lm = lms.l_prev;
+    }
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  reinit_frame_cache ();
+}
+
+#if defined(_ES_MP)
+
+#include <sys/regset.h>
+
+unsigned int
+m88k_harris_core_register_addr (regno, reg_ptr)
+     int regno, reg_ptr;
+{
+   unsigned int word_offset;
+
+   switch (regno)
+     {
+     case PSR_REGNUM:
+       word_offset = R_EPSR;
+       break;
+     case FPSR_REGNUM:
+       word_offset = R_FPSR;
+       break;
+     case FPCR_REGNUM:
+       word_offset = R_FPCR;
+       break;
+     case SXIP_REGNUM:
+       word_offset = R_EXIP;
+       break;
+     case SNIP_REGNUM:
+       word_offset = R_ENIP;
+       break;
+     case SFIP_REGNUM:
+       word_offset = R_EFIP;
+       break;
+     default:
+       if (regno <= FP_REGNUM) 
+	 word_offset = regno;
+       else 
+	 word_offset = ((regno - X0_REGNUM) * 4);
+     }
+   return (word_offset * 4);
+}
+
+#endif /* _ES_MP */
+
+void
+_initialize_m88k_nat()
+{
+#ifdef _ES_MP
+   /* Enable 88110 support, as we don't support the 88100 under ES/MP.  */
+
+   target_is_m88110 = 1;
+#elif defined(_CX_UX)
+   /* Determine whether we're running on an 88100 or an 88110.  */
+   target_is_m88110 = (sinfo(SYSMACHINE,0) == SYS5800);
+#endif /* _CX_UX */
+}
+
+#ifdef _ES_MP
+/* Given a pointer to a general register set in /proc format (gregset_t *),
+   unpack the register contents and supply them as gdb's idea of the current
+   register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+
+  for (regi = 0 ; regi < R_R31 ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regi));
+    }
+  supply_register (PSR_REGNUM,  (char *) (regp + R_EPSR));
+  supply_register (FPSR_REGNUM, (char *) (regp + R_FPSR));
+  supply_register (FPCR_REGNUM, (char *) (regp + R_FPCR));
+  supply_register (SXIP_REGNUM, (char *) (regp + R_EXIP));
+  supply_register (SNIP_REGNUM, (char *) (regp + R_ENIP));
+  supply_register (SFIP_REGNUM, (char *) (regp + R_EFIP));
+}
+
+/* Given a pointer to a floating point register set in /proc format
+   (fpregset_t *), unpack the register contents and supply them as gdb's
+   idea of the current floating point register values.  */
+
+void 
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  char *from;
+  
+  for (regi = FP0_REGNUM ; regi <= FPLAST_REGNUM ; regi++)
+    {
+      from = (char *) &((*fpregsetp)[regi-FP0_REGNUM]);
+      supply_register (regi, from);
+    }
+}
+
+#endif /* _ES_MP */
+
+#ifdef _CX_UX
+
+#include <sys/regset.h>
+
+unsigned int m88k_harris_core_register_addr(int regno, int reg_ptr)
+{
+   unsigned int word_offset;
+
+   switch (regno) {
+    case PSR_REGNUM  : word_offset = R_PSR;  break;
+    case FPSR_REGNUM : word_offset = R_FPSR; break;
+    case FPCR_REGNUM : word_offset = R_FPCR; break;
+    case SXIP_REGNUM : word_offset = R_XIP;  break;
+    case SNIP_REGNUM : word_offset = R_NIP;  break;
+    case SFIP_REGNUM : word_offset = R_FIP;  break;
+    default :
+      if (regno <= FP_REGNUM) 
+            word_offset = regno;
+      else 
+            word_offset = ((regno - X0_REGNUM) * 4) + R_X0;
+   }
+   return (word_offset * 4);
+}
+
+#endif /* _CX_UX */
diff --git a/gdb/d10v-tdep.c b/gdb/d10v-tdep.c
new file mode 100644
index 0000000..f4b52f6
--- /dev/null
+++ b/gdb/d10v-tdep.c
@@ -0,0 +1,1028 @@
+/* Target-dependent code for Mitsubishi D10V, for GDB.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*  Contributed by Martin Hunt, hunt@cygnus.com */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "inferior.h"
+#include "dis-asm.h"  
+#include "symfile.h"
+#include "objfiles.h"
+
+void d10v_frame_find_saved_regs PARAMS ((struct frame_info *fi,
+					 struct frame_saved_regs *fsr));
+
+int
+d10v_frame_chain_valid (chain, frame)
+     CORE_ADDR chain;
+     struct frame_info *frame;      /* not used here */
+{
+  return ((chain) != 0 && (frame) != 0 && (frame)->pc > IMEM_START);
+}
+
+
+/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of
+   EXTRACT_RETURN_VALUE?  GCC_P is true if compiled with gcc
+   and TYPE is the type (which is known to be struct, union or array).
+
+   The d10v returns anything less than 8 bytes in size in
+   registers. */
+
+int
+d10v_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 8);
+}
+
+
+/* Discard from the stack the innermost frame, restoring all saved
+   registers.  */
+
+void
+d10v_pop_frame (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR fp;
+  int regnum;
+  struct frame_saved_regs fsr;
+  char raw_buffer[8];
+
+  fp = FRAME_FP (frame);
+  /* fill out fsr with the address of where each */
+  /* register was stored in the frame */
+  get_frame_saved_regs (frame, &fsr);
+  
+  /* now update the current registers with the old values */
+  for (regnum = A0_REGNUM; regnum < A0_REGNUM+2 ; regnum++)
+    {
+      if (fsr.regs[regnum])
+	{
+	  read_memory (fsr.regs[regnum], raw_buffer,  REGISTER_RAW_SIZE(regnum));
+	  write_register_bytes (REGISTER_BYTE (regnum), raw_buffer,  REGISTER_RAW_SIZE(regnum));
+	}
+    }
+  for (regnum = 0; regnum < SP_REGNUM; regnum++)
+    {
+      if (fsr.regs[regnum])
+	{
+	  write_register (regnum, read_memory_unsigned_integer (fsr.regs[regnum], REGISTER_RAW_SIZE(regnum)));
+	}
+    }
+  if (fsr.regs[PSW_REGNUM])
+    {
+      write_register (PSW_REGNUM, read_memory_unsigned_integer (fsr.regs[PSW_REGNUM], REGISTER_RAW_SIZE(PSW_REGNUM)));
+    }
+
+  write_register (PC_REGNUM, read_register (LR_REGNUM));
+  write_register (SP_REGNUM, fp + frame->size);
+  target_store_registers (-1);
+  flush_cached_frames ();
+}
+
+static int 
+check_prologue (op)
+     unsigned short op;
+{
+  /* st  rn, @-sp */
+  if ((op & 0x7E1F) == 0x6C1F)
+    return 1;
+
+  /* st2w  rn, @-sp */
+  if ((op & 0x7E3F) == 0x6E1F)
+    return 1;
+
+  /* subi  sp, n */
+  if ((op & 0x7FE1) == 0x01E1)
+    return 1;
+
+  /* mv  r11, sp */
+  if (op == 0x417E)
+    return 1;
+
+  /* nop */
+  if (op == 0x5E00)
+    return 1;
+
+  /* st  rn, @sp */
+  if ((op & 0x7E1F) == 0x681E)
+    return 1;
+
+  /* st2w  rn, @sp */
+ if ((op & 0x7E3F) == 0x3A1E)
+   return 1;
+
+  return 0;
+}
+
+CORE_ADDR
+d10v_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  unsigned long op;
+  unsigned short op1, op2;
+  CORE_ADDR func_addr, func_end;
+  struct symtab_and_line sal;
+
+  /* If we have line debugging information, then the end of the */
+  /* prologue should the first assembly instruction of  the first source line */
+  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    {
+      sal = find_pc_line (func_addr, 0);
+      if ( sal.end && sal.end < func_end)
+	return sal.end;
+    }
+  
+  if (target_read_memory (pc, (char *)&op, 4))
+    return pc;			/* Can't access it -- assume no prologue. */
+
+  while (1)
+    {
+      op = (unsigned long)read_memory_integer (pc, 4);
+      if ((op & 0xC0000000) == 0xC0000000)
+	{
+	  /* long instruction */
+	  if ( ((op & 0x3FFF0000) != 0x01FF0000) &&   /* add3 sp,sp,n */
+	       ((op & 0x3F0F0000) != 0x340F0000) &&   /* st  rn, @(offset,sp) */
+ 	       ((op & 0x3F1F0000) != 0x350F0000))     /* st2w  rn, @(offset,sp) */
+	    break;
+	}
+      else
+	{
+	  /* short instructions */
+	  if ((op & 0xC0000000) == 0x80000000)
+	    {
+	      op2 = (op & 0x3FFF8000) >> 15;
+	      op1 = op & 0x7FFF;
+	    } 
+	  else 
+	    {
+	      op1 = (op & 0x3FFF8000) >> 15;
+	      op2 = op & 0x7FFF;
+	    }
+	  if (check_prologue(op1))
+	    {
+	      if (!check_prologue(op2))
+		{
+		  /* if the previous opcode was really part of the prologue */
+		  /* and not just a NOP, then we want to break after both instructions */
+		  if (op1 != 0x5E00)
+		    pc += 4;
+		  break;
+		}
+	    }
+	  else
+	    break;
+	}
+      pc += 4;
+    }
+  return pc;
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+*/
+
+CORE_ADDR
+d10v_frame_chain (frame)
+     struct frame_info *frame;
+{
+  struct frame_saved_regs fsr;
+
+  d10v_frame_find_saved_regs (frame, &fsr);
+
+  if (frame->return_pc == IMEM_START || inside_entry_file(frame->return_pc))
+    return (CORE_ADDR)0;
+
+  if (!fsr.regs[FP_REGNUM])
+    {
+      if (!fsr.regs[SP_REGNUM] || fsr.regs[SP_REGNUM] == STACK_START)
+	return (CORE_ADDR)0;
+      
+      return fsr.regs[SP_REGNUM];
+    }
+
+  if (!read_memory_unsigned_integer(fsr.regs[FP_REGNUM], REGISTER_RAW_SIZE(FP_REGNUM)))
+    return (CORE_ADDR)0;
+
+  return D10V_MAKE_DADDR (read_memory_unsigned_integer (fsr.regs[FP_REGNUM], REGISTER_RAW_SIZE (FP_REGNUM)));
+}  
+
+static int next_addr, uses_frame;
+
+static int 
+prologue_find_regs (op, fsr, addr)
+     unsigned short op;
+     struct frame_saved_regs *fsr;
+     CORE_ADDR addr;
+{
+  int n;
+
+  /* st  rn, @-sp */
+  if ((op & 0x7E1F) == 0x6C1F)
+    {
+      n = (op & 0x1E0) >> 5;
+      next_addr -= 2;
+      fsr->regs[n] = next_addr;
+      return 1;
+    }
+
+  /* st2w  rn, @-sp */
+  else if ((op & 0x7E3F) == 0x6E1F)
+    {
+      n = (op & 0x1E0) >> 5;
+      next_addr -= 4;
+      fsr->regs[n] = next_addr;
+      fsr->regs[n+1] = next_addr+2;
+      return 1;
+    }
+
+  /* subi  sp, n */
+  if ((op & 0x7FE1) == 0x01E1)
+    {
+      n = (op & 0x1E) >> 1;
+      if (n == 0)
+	n = 16;
+      next_addr -= n;
+      return 1;
+    }
+
+  /* mv  r11, sp */
+  if (op == 0x417E)
+    {
+      uses_frame = 1;
+      return 1;
+    }
+
+  /* nop */
+  if (op == 0x5E00)
+    return 1;
+
+  /* st  rn, @sp */
+  if ((op & 0x7E1F) == 0x681E)
+    {
+      n = (op & 0x1E0) >> 5;
+      fsr->regs[n] = next_addr;
+      return 1;
+    }
+
+  /* st2w  rn, @sp */
+  if ((op & 0x7E3F) == 0x3A1E)
+    {
+      n = (op & 0x1E0) >> 5;
+      fsr->regs[n] = next_addr;
+      fsr->regs[n+1] = next_addr+2;
+      return 1;
+    }
+
+  return 0;
+}
+
+/* Put here the code to store, into a struct frame_saved_regs, the
+   addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special: the address we
+   return for it IS the sp for the next frame. */
+void
+d10v_frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  CORE_ADDR fp, pc;
+  unsigned long op;
+  unsigned short op1, op2;
+  int i;
+
+  fp = fi->frame;
+  memset (fsr, 0, sizeof (*fsr));
+  next_addr = 0;
+
+  pc = get_pc_function_start (fi->pc);
+
+  uses_frame = 0;
+  while (1)
+    {
+      op = (unsigned long)read_memory_integer (pc, 4);
+      if ((op & 0xC0000000) == 0xC0000000)
+	{
+	  /* long instruction */
+	  if ((op & 0x3FFF0000) == 0x01FF0000)
+	    {
+	      /* add3 sp,sp,n */
+	      short n = op & 0xFFFF;
+	      next_addr += n;
+	    }
+	  else if ((op & 0x3F0F0000) == 0x340F0000)
+	    {
+	      /* st  rn, @(offset,sp) */
+	      short offset = op & 0xFFFF;
+	      short n = (op >> 20) & 0xF;
+	      fsr->regs[n] = next_addr + offset;
+	    }
+	  else if ((op & 0x3F1F0000) == 0x350F0000)
+	    {
+	      /* st2w  rn, @(offset,sp) */
+	      short offset = op & 0xFFFF;
+	      short n = (op >> 20) & 0xF;
+	      fsr->regs[n] = next_addr + offset;
+	      fsr->regs[n+1] = next_addr + offset + 2;
+	    }
+	  else
+	    break;
+	}
+      else
+	{
+	  /* short instructions */
+	  if ((op & 0xC0000000) == 0x80000000)
+	    {
+	      op2 = (op & 0x3FFF8000) >> 15;
+	      op1 = op & 0x7FFF;
+	    } 
+	  else 
+	    {
+	      op1 = (op & 0x3FFF8000) >> 15;
+	      op2 = op & 0x7FFF;
+	    }
+	  if (!prologue_find_regs(op1,fsr,pc) || !prologue_find_regs(op2,fsr,pc))
+	    break;
+	}
+      pc += 4;
+    }
+  
+  fi->size = -next_addr;
+
+  if (!(fp & 0xffff))
+    fp = D10V_MAKE_DADDR (read_register(SP_REGNUM));
+
+  for (i=0; i<NUM_REGS-1; i++)
+    if (fsr->regs[i])
+      {
+	fsr->regs[i] = fp - (next_addr - fsr->regs[i]); 
+      }
+
+  if (fsr->regs[LR_REGNUM])
+    {
+      CORE_ADDR return_pc = read_memory_unsigned_integer (fsr->regs[LR_REGNUM], REGISTER_RAW_SIZE (LR_REGNUM));
+      fi->return_pc = D10V_MAKE_IADDR (return_pc);
+    }
+  else
+    {
+      fi->return_pc = D10V_MAKE_IADDR (read_register(LR_REGNUM));
+    }
+  
+  /* th SP is not normally (ever?) saved, but check anyway */
+  if (!fsr->regs[SP_REGNUM])
+    {
+      /* if the FP was saved, that means the current FP is valid, */
+      /* otherwise, it isn't being used, so we use the SP instead */
+      if (uses_frame)
+	fsr->regs[SP_REGNUM] = read_register(FP_REGNUM) + fi->size;
+      else
+	{
+	  fsr->regs[SP_REGNUM] = fp + fi->size;
+	  fi->frameless = 1;
+	  fsr->regs[FP_REGNUM] = 0;
+	}
+    }
+}
+
+void
+d10v_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  fi->frameless = 0;
+  fi->size = 0;
+  fi->return_pc = 0;
+
+  /* The call dummy doesn't save any registers on the stack, so we can
+     return now.  */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    {
+      return;
+    }
+  else
+    {
+      struct frame_saved_regs dummy;
+      d10v_frame_find_saved_regs (fi, &dummy);
+    }
+}
+
+static void
+show_regs (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int a;
+  printf_filtered ("PC=%04x (0x%x) PSW=%04x RPT_S=%04x RPT_E=%04x RPT_C=%04x\n",
+                   read_register (PC_REGNUM), D10V_MAKE_IADDR (read_register (PC_REGNUM)),
+                   read_register (PSW_REGNUM),
+                   read_register (24),
+                   read_register (25),
+                   read_register (23));
+  printf_filtered ("R0-R7  %04x %04x %04x %04x %04x %04x %04x %04x\n",
+                   read_register (0),
+                   read_register (1),
+                   read_register (2),
+                   read_register (3),
+                   read_register (4),
+                   read_register (5),
+                   read_register (6),
+                   read_register (7));
+  printf_filtered ("R8-R15 %04x %04x %04x %04x %04x %04x %04x %04x\n",
+                   read_register (8), 
+                   read_register (9),
+                   read_register (10),
+                   read_register (11),
+                   read_register (12),
+                   read_register (13),
+                   read_register (14),
+                   read_register (15));
+  printf_filtered ("IMAP0 %04x    IMAP1 %04x    DMAP %04x\n",
+                   read_register (IMAP0_REGNUM),
+                   read_register (IMAP1_REGNUM),
+                   read_register (DMAP_REGNUM));
+  printf_filtered ("A0-A1");
+  for (a = A0_REGNUM; a <= A0_REGNUM + 1; a++)
+    {
+      char num[MAX_REGISTER_RAW_SIZE];
+      int i;
+      printf_filtered ("  ");
+      read_register_gen (a, (char *)&num);
+      for (i = 0; i < MAX_REGISTER_RAW_SIZE; i++)
+	{
+	  printf_filtered ("%02x", (num[i] & 0xff));
+	}
+    }
+  printf_filtered ("\n");
+}
+
+CORE_ADDR
+d10v_read_pc (pid)
+     int pid;
+{
+  int save_pid;
+  CORE_ADDR pc;
+  CORE_ADDR retval;
+
+  save_pid = inferior_pid;
+  inferior_pid = pid;
+  pc = (int) read_register (PC_REGNUM);
+  inferior_pid = save_pid;
+  retval = D10V_MAKE_IADDR (pc);
+  return retval;
+}
+
+void
+d10v_write_pc (val, pid)
+     CORE_ADDR val;
+     int pid;
+{
+  int save_pid;
+
+  save_pid = inferior_pid;
+  inferior_pid = pid;
+  write_register (PC_REGNUM, D10V_CONVERT_IADDR_TO_RAW (val));
+  inferior_pid = save_pid;
+}
+
+CORE_ADDR
+d10v_read_sp ()
+{
+  return (D10V_MAKE_DADDR (read_register (SP_REGNUM)));
+}
+
+void
+d10v_write_sp (val)
+     CORE_ADDR val;
+{
+  write_register (SP_REGNUM, D10V_CONVERT_DADDR_TO_RAW (val));
+}
+
+void
+d10v_write_fp (val)
+     CORE_ADDR val;
+{
+  write_register (FP_REGNUM, D10V_CONVERT_DADDR_TO_RAW (val));
+}
+
+CORE_ADDR
+d10v_read_fp ()
+{
+  return (D10V_MAKE_DADDR (read_register(FP_REGNUM)));
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Needed for targets where we don't actually execute a JSR/BSR instruction */
+ 
+CORE_ADDR
+d10v_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  write_register (LR_REGNUM, D10V_CONVERT_IADDR_TO_RAW (CALL_DUMMY_ADDRESS ()));
+  return sp;
+}
+ 
+
+CORE_ADDR
+d10v_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  int i;
+  int regnum = ARG1_REGNUM;
+  
+  /* Fill in registers and arg lists */
+  for (i = 0; i < nargs; i++)
+    {
+      value_ptr arg = args[i];
+      struct type *type = check_typedef (VALUE_TYPE (arg));
+      char *contents = VALUE_CONTENTS (arg);
+      int len = TYPE_LENGTH (type);
+      /* printf ("push: type=%d len=%d\n", type->code, len); */
+      if (TYPE_CODE (type) == TYPE_CODE_PTR)
+	{
+	  /* pointers require special handling - first convert and
+	     then store */
+	  long val = extract_signed_integer (contents, len);
+	  len = 2;
+	  if (TYPE_TARGET_TYPE (type)
+	      && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
+	    {
+	      /* function pointer */
+	      val = D10V_CONVERT_IADDR_TO_RAW (val);
+	    }
+	  else if (D10V_IADDR_P (val))
+	    {
+	      /* also function pointer! */
+	      val = D10V_CONVERT_DADDR_TO_RAW (val);
+	    }
+	  else
+	    {
+	      /* data pointer */
+	      val &= 0xFFFF;
+	    }
+	  if (regnum <= ARGN_REGNUM)
+	    write_register (regnum++, val & 0xffff);
+	  else
+	    {
+	      char ptr[2];
+	      sp -= 2;
+	      store_address (ptr, val & 0xffff, 2);
+	      write_memory (sp, ptr, 2);
+	    }
+	}
+      else
+	{
+	  int aligned_regnum = (regnum + 1) & ~1;
+	  if (len <= 2 && regnum <= ARGN_REGNUM)
+	    /* fits in a single register, do not align */
+	    {
+	      long val = extract_unsigned_integer (contents, len);
+	      write_register (regnum++, val);
+	    }
+	  else if (len <= (ARGN_REGNUM - aligned_regnum + 1) * 2)
+	    /* value fits in remaining registers, store keeping left
+               aligned */
+	    {
+	      int b;
+	      regnum = aligned_regnum;
+	      for (b = 0; b < (len & ~1); b += 2)
+		{
+		  long val = extract_unsigned_integer (&contents[b], 2);
+		  write_register (regnum++, val);
+		}
+	      if (b < len)
+		{
+		  long val = extract_unsigned_integer (&contents[b], 1);
+		  write_register (regnum++, (val << 8));
+		}
+	    }
+	  else
+	    {
+	      /* arg goes straight on stack */
+	      regnum = ARGN_REGNUM + 1;
+	      sp = (sp - len) & ~1;
+	      write_memory (sp, contents, len);
+	    }
+	}
+    }
+  return sp;
+}
+
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   extract and copy its value into `valbuf'.  */
+
+void
+d10v_extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     char regbuf[REGISTER_BYTES];
+     char *valbuf;
+{
+  int len;
+  /*    printf("RET: TYPE=%d len=%d r%d=0x%x\n",type->code, TYPE_LENGTH (type), RET1_REGNUM - R0_REGNUM, (int) extract_unsigned_integer (regbuf + REGISTER_BYTE(RET1_REGNUM), REGISTER_RAW_SIZE (RET1_REGNUM)));  */
+  if (TYPE_CODE (type) == TYPE_CODE_PTR
+      && TYPE_TARGET_TYPE (type)
+      && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
+    {
+      /* pointer to function */
+      int num;
+      short snum;
+      snum = extract_address (regbuf + REGISTER_BYTE (RET1_REGNUM), REGISTER_RAW_SIZE (RET1_REGNUM));
+      store_address ( valbuf, 4, D10V_MAKE_IADDR(snum));
+    }
+  else if (TYPE_CODE(type) == TYPE_CODE_PTR)
+    {
+      /* pointer to data */
+      int num;
+      short snum;
+      snum = extract_address (regbuf + REGISTER_BYTE (RET1_REGNUM), REGISTER_RAW_SIZE (RET1_REGNUM));
+      store_address ( valbuf, 4, D10V_MAKE_DADDR(snum));
+    }
+  else
+    {
+      len = TYPE_LENGTH (type);
+      if (len == 1)
+	{
+	  unsigned short c = extract_unsigned_integer (regbuf + REGISTER_BYTE (RET1_REGNUM), REGISTER_RAW_SIZE (RET1_REGNUM));
+	  store_unsigned_integer (valbuf, 1, c);
+	}
+      else if ((len & 1) == 0)
+	memcpy (valbuf, regbuf + REGISTER_BYTE (RET1_REGNUM), len);
+      else
+	{
+	  /* For return values of odd size, the first byte is in the
+             least significant part of the first register.  The
+             remaining bytes in remaining registers. Interestingly,
+             when such values are passed in, the last byte is in the
+             most significant byte of that same register - wierd. */
+	  memcpy (valbuf, regbuf + REGISTER_BYTE (RET1_REGNUM) + 1, len);
+	}
+    }
+}
+
+/* The following code implements access to, and display of, the D10V's
+   instruction trace buffer.  The buffer consists of 64K or more
+   4-byte words of data, of which each words includes an 8-bit count,
+   an 8-bit segment number, and a 16-bit instruction address.
+
+   In theory, the trace buffer is continuously capturing instruction
+   data that the CPU presents on its "debug bus", but in practice, the
+   ROMified GDB stub only enables tracing when it continues or steps
+   the program, and stops tracing when the program stops; so it
+   actually works for GDB to read the buffer counter out of memory and
+   then read each trace word.  The counter records where the tracing
+   stops, but there is no record of where it started, so we remember
+   the PC when we resumed and then search backwards in the trace
+   buffer for a word that includes that address.  This is not perfect,
+   because you will miss trace data if the resumption PC is the target
+   of a branch.  (The value of the buffer counter is semi-random, any
+   trace data from a previous program stop is gone.)  */
+
+/* The address of the last word recorded in the trace buffer.  */
+
+#define DBBC_ADDR (0xd80000)
+
+/* The base of the trace buffer, at least for the "Board_0".  */
+
+#define TRACE_BUFFER_BASE (0xf40000)
+
+static void trace_command PARAMS ((char *, int));
+
+static void untrace_command PARAMS ((char *, int));
+
+static void trace_info PARAMS ((char *, int));
+
+static void tdisassemble_command PARAMS ((char *, int));
+
+static void display_trace PARAMS ((int, int));
+
+/* True when instruction traces are being collected.  */
+
+static int tracing;
+
+/* Remembered PC.  */
+
+static CORE_ADDR last_pc;
+
+/* True when trace output should be displayed whenever program stops.  */
+
+static int trace_display;
+
+/* True when trace listing should include source lines.  */
+
+static int default_trace_show_source = 1;
+
+struct trace_buffer {
+  int size;
+  short *counts;
+  CORE_ADDR *addrs;
+} trace_data;
+
+static void
+trace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* Clear the host-side trace buffer, allocating space if needed.  */
+  trace_data.size = 0;
+  if (trace_data.counts == NULL)
+    trace_data.counts = (short *) xmalloc (65536 * sizeof(short));
+  if (trace_data.addrs == NULL)
+    trace_data.addrs = (CORE_ADDR *) xmalloc (65536 * sizeof(CORE_ADDR));
+
+  tracing = 1;
+
+  printf_filtered ("Tracing is now on.\n");
+}
+
+static void
+untrace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  tracing = 0;
+
+  printf_filtered ("Tracing is now off.\n");
+}
+
+static void
+trace_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int i;
+
+  if (trace_data.size)
+    {
+      printf_filtered ("%d entries in trace buffer:\n", trace_data.size);
+
+      for (i = 0; i < trace_data.size; ++i)
+	{
+	  printf_filtered ("%d: %d instruction%s at 0x%x\n",
+			   i, trace_data.counts[i],
+			   (trace_data.counts[i] == 1 ? "" : "s"),
+			   trace_data.addrs[i]);
+	}
+    }
+  else
+    printf_filtered ("No entries in trace buffer.\n");
+
+  printf_filtered ("Tracing is currently %s.\n", (tracing ? "on" : "off"));
+}
+
+/* Print the instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+static int
+print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     GDB_FILE *stream;
+{
+  /* If there's no disassembler, something is very wrong.  */
+  if (tm_print_insn == NULL)
+    abort ();
+
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    tm_print_insn_info.endian = BFD_ENDIAN_BIG;
+  else
+    tm_print_insn_info.endian = BFD_ENDIAN_LITTLE;
+  return (*tm_print_insn) (memaddr, &tm_print_insn_info);
+}
+
+void
+d10v_eva_prepare_to_trace ()
+{
+  if (!tracing)
+    return;
+
+  last_pc = read_register (PC_REGNUM);
+}
+
+/* Collect trace data from the target board and format it into a form
+   more useful for display.  */
+
+void
+d10v_eva_get_trace_data ()
+{
+  int count, i, j, oldsize;
+  int trace_addr, trace_seg, trace_cnt, next_cnt;
+  unsigned int last_trace, trace_word, next_word;
+  unsigned int *tmpspace;
+
+  if (!tracing)
+    return;
+
+  tmpspace = xmalloc (65536 * sizeof(unsigned int));
+
+  last_trace = read_memory_unsigned_integer (DBBC_ADDR, 2) << 2;
+
+  /* Collect buffer contents from the target, stopping when we reach
+     the word recorded when execution resumed.  */
+
+  count = 0;
+  while (last_trace > 0)
+    {
+      QUIT;
+      trace_word =
+	read_memory_unsigned_integer (TRACE_BUFFER_BASE + last_trace, 4);
+      trace_addr = trace_word & 0xffff;
+      last_trace -= 4;
+      /* Ignore an apparently nonsensical entry.  */
+      if (trace_addr == 0xffd5)
+	continue;
+      tmpspace[count++] = trace_word;
+      if (trace_addr == last_pc)
+	break;
+      if (count > 65535)
+	break;
+    }
+
+  /* Move the data to the host-side trace buffer, adjusting counts to
+     include the last instruction executed and transforming the address
+     into something that GDB likes.  */
+
+  for (i = 0; i < count; ++i)
+    {
+      trace_word = tmpspace[i];
+      next_word = ((i == 0) ? 0 : tmpspace[i - 1]);
+      trace_addr = trace_word & 0xffff;
+      next_cnt = (next_word >> 24) & 0xff;
+      j = trace_data.size + count - i - 1;
+      trace_data.addrs[j] = (trace_addr << 2) + 0x1000000;
+      trace_data.counts[j] = next_cnt + 1;
+    }
+
+  oldsize = trace_data.size;
+  trace_data.size += count;
+
+  free (tmpspace);
+
+  if (trace_display)
+    display_trace (oldsize, trace_data.size);
+}
+
+static void
+tdisassemble_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int i, count;
+  CORE_ADDR low, high;
+  char *space_index;
+
+  if (!arg)
+    {
+      low = 0;
+      high = trace_data.size;
+    }
+  else if (!(space_index = (char *) strchr (arg, ' ')))
+    {
+      low = parse_and_eval_address (arg);
+      high = low + 5;
+    }
+  else
+    {
+      /* Two arguments.  */
+      *space_index = '\0';
+      low = parse_and_eval_address (arg);
+      high = parse_and_eval_address (space_index + 1);
+      if (high < low)
+	high = low;
+    }
+
+  printf_filtered ("Dump of trace from %d to %d:\n", low, high);
+
+  display_trace (low, high);
+
+  printf_filtered ("End of trace dump.\n");
+  gdb_flush (gdb_stdout);
+}
+
+static void
+display_trace (low, high)
+     int low, high;
+{
+  int i, count, trace_show_source, first, suppress;
+  CORE_ADDR next_address;
+
+  trace_show_source = default_trace_show_source;
+  if (!have_full_symbols () && !have_partial_symbols())
+    {
+      trace_show_source = 0;
+      printf_filtered ("No symbol table is loaded.  Use the \"file\" command.\n");
+      printf_filtered ("Trace will not display any source.\n");
+    }
+
+  first = 1;
+  suppress = 0;
+  for (i = low; i < high; ++i)
+    {
+      next_address = trace_data.addrs[i];
+      count = trace_data.counts[i]; 
+      while (count-- > 0)
+	{
+	  QUIT;
+	  if (trace_show_source)
+	    {
+	      struct symtab_and_line sal, sal_prev;
+
+	      sal_prev = find_pc_line (next_address - 4, 0);
+	      sal = find_pc_line (next_address, 0);
+
+	      if (sal.symtab)
+		{
+		  if (first || sal.line != sal_prev.line)
+		    print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
+		  suppress = 0;
+		}
+	      else
+		{
+		  if (!suppress)
+		    /* FIXME-32x64--assumes sal.pc fits in long.  */
+		    printf_filtered ("No source file for address %s.\n",
+				     local_hex_string((unsigned long) sal.pc));
+		  suppress = 1;
+		}
+	    }
+	  first = 0;
+	  print_address (next_address, gdb_stdout);
+	  printf_filtered (":");
+	  printf_filtered ("\t");
+	  wrap_here ("    ");
+	  next_address = next_address + print_insn (next_address, gdb_stdout);
+	  printf_filtered ("\n");
+	  gdb_flush (gdb_stdout);
+	}
+    }
+}
+
+extern void (*target_resume_hook) PARAMS ((void));
+extern void (*target_wait_loop_hook) PARAMS ((void));
+
+void
+_initialize_d10v_tdep ()
+{
+  tm_print_insn = print_insn_d10v;
+
+  target_resume_hook = d10v_eva_prepare_to_trace;
+  target_wait_loop_hook = d10v_eva_get_trace_data;
+
+  add_com ("regs", class_vars, show_regs, "Print all registers");
+
+  add_com ("trace", class_support, trace_command,
+	   "Enable tracing of instruction execution.");
+
+  add_com ("untrace", class_support, untrace_command,
+	   "Disable tracing of instruction execution.");
+
+  add_com ("tdisassemble", class_vars, tdisassemble_command,
+	   "Disassemble the trace buffer.\n\
+Two optional arguments specify a range of trace buffer entries\n\
+as reported by info trace (NOT addresses!).");
+
+  add_info ("trace", trace_info,
+	    "Display info about the trace data buffer.");
+
+  add_show_from_set (add_set_cmd ("tracedisplay", no_class,
+				  var_integer, (char *)&trace_display,
+				  "Set automatic display of trace.\n", &setlist),
+		     &showlist);
+  add_show_from_set (add_set_cmd ("tracesource", no_class,
+				  var_integer, (char *)&default_trace_show_source,
+				  "Set display of source code with trace.\n", &setlist),
+		     &showlist);
+
+} 
diff --git a/gdb/d30v-tdep.c b/gdb/d30v-tdep.c
new file mode 100644
index 0000000..ec46463
--- /dev/null
+++ b/gdb/d30v-tdep.c
@@ -0,0 +1,1396 @@
+/* Target-dependent code for Mitsubishi D30V, for GDB.
+   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*  Contributed by Martin Hunt, hunt@cygnus.com */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "inferior.h"
+#include "dis-asm.h"  
+#include "symfile.h"
+#include "objfiles.h"
+
+void d30v_frame_find_saved_regs PARAMS ((struct frame_info *fi,
+					 struct frame_saved_regs *fsr));
+void d30v_frame_find_saved_regs_offsets PARAMS ((struct frame_info *fi,
+						 struct frame_saved_regs *fsr));
+static void d30v_pop_dummy_frame PARAMS ((struct frame_info *fi));
+static void d30v_print_flags PARAMS ((void));
+static void print_flags_command PARAMS ((char *, int));
+
+/* the following defines assume:
+   fp is r61, lr is r62, sp is r63, and ?? is r22
+   if that changes, they will need to be updated */
+
+#define OP_MASK_ALL_BUT_RA	0x0ffc0fff /* throw away Ra, keep the rest */
+
+#define OP_STW_SPM		0x054c0fc0 /* stw Ra, @(sp-) */
+#define OP_STW_SP_R0		0x05400fc0 /* stw Ra, @(sp,r0) */
+#define OP_STW_SP_IMM0		0x05480fc0 /* st Ra, @(sp, 0x0) */
+#define OP_STW_R22P_R0		0x05440580 /* stw Ra, @(r22+,r0) */
+
+#define OP_ST2W_SPM		0x056c0fc0 /* st2w Ra, @(sp-) */
+#define OP_ST2W_SP_R0		0x05600fc0 /* st2w Ra, @(sp, r0) */
+#define OP_ST2W_SP_IMM0		0x05680fc0 /* st2w Ra, @(sp, 0x0) */
+#define OP_ST2W_R22P_R0		0x05640580 /* st2w Ra, @(r22+, r0) */
+
+#define OP_MASK_OPCODE		0x0ffc0000 /* just the opcode, ign operands */
+#define OP_NOP			0x00f00000 /* nop */
+
+#define OP_MASK_ALL_BUT_IMM	0x0fffffc0 /* throw away imm, keep the rest */
+#define OP_SUB_SP_IMM		0x082bffc0 /* sub sp,sp,imm */
+#define OP_ADD_SP_IMM		0x080bffc0 /* add sp,sp,imm */
+#define OP_ADD_R22_SP_IMM	0x08096fc0 /* add r22,sp,imm */
+#define OP_STW_FP_SP_IMM	0x054bdfc0 /* stw fp,@(sp,imm) */
+#define OP_OR_SP_R0_IMM		0x03abf000 /* or sp,r0,imm */
+
+/* no mask */
+#define OP_OR_FP_R0_SP		0x03a3d03f /* or fp,r0,sp */
+#define OP_OR_FP_SP_R0		0x03a3dfc0 /* or fp,sp,r0 */
+#define OP_OR_FP_IMM0_SP	0x03abd03f /* or fp,0x0,sp */
+#define OP_STW_FP_R22P_R0	0x0547d580 /* stw fp,@(r22+,r0) */
+#define OP_STW_LR_R22P_R0	0x0547e580 /* stw lr,@(r22+,r0) */
+
+#define OP_MASK_OP_AND_RB	0x0ff80fc0 /* keep op and rb,throw away rest */
+#define OP_STW_SP_IMM		0x05480fc0 /* stw Ra,@(sp,imm) */
+#define OP_ST2W_SP_IMM		0x05680fc0 /* st2w Ra,@(sp,imm) */
+#define OP_STW_FP_IMM		0x05480f40 /* stw Ra,@(fp,imm) */
+#define OP_STW_FP_R0		0x05400f40 /* stw Ra,@(fp,r0) */
+
+#define OP_MASK_FM_BIT		0x80000000
+#define OP_MASK_CC_BITS		0x70000000
+#define OP_MASK_SUB_INST	0x0fffffff
+
+#define EXTRACT_RA(op)		(((op) >> 12) & 0x3f)
+#define EXTRACT_RB(op)		(((op) >> 6) & 0x3f)
+#define EXTRACT_RC(op)		(((op) & 0x3f)
+#define EXTRACT_UIMM6(op)	((op) & 0x3f)
+#define EXTRACT_IMM6(op)	((((int)EXTRACT_UIMM6(op)) << 26) >> 26)
+#define EXTRACT_IMM26(op)	((((op)&0x0ff00000) >> 2) | ((op)&0x0003ffff))
+#define EXTRACT_IMM32(opl, opr)	((EXTRACT_UIMM6(opl) << 26)|EXTRACT_IMM26(opr))
+
+
+int
+d30v_frame_chain_valid (chain, fi)
+     CORE_ADDR chain;
+     struct frame_info *fi;      /* not used here */
+{
+#if 0
+  return ((chain) != 0 && (fi) != 0 && (fi)->return_pc != 0);
+#else
+  return ((chain) != 0 && (fi) != 0 && (fi)->frame <= chain);
+#endif
+}
+
+/* Discard from the stack the innermost frame, restoring all saved
+   registers.  */
+
+void
+d30v_pop_frame ()
+{
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR fp;
+  int regnum;
+  struct frame_saved_regs fsr;
+  char raw_buffer[8];
+
+  fp = FRAME_FP (frame);
+  if (frame->dummy)
+    {
+      d30v_pop_dummy_frame(frame);
+      return;
+    }
+
+  /* fill out fsr with the address of where each */
+  /* register was stored in the frame */
+  get_frame_saved_regs (frame, &fsr);
+  
+  /* now update the current registers with the old values */
+  for (regnum = A0_REGNUM; regnum < A0_REGNUM+2 ; regnum++)
+    {
+      if (fsr.regs[regnum])
+	{
+	  read_memory (fsr.regs[regnum], raw_buffer, 8);
+	  write_register_bytes (REGISTER_BYTE (regnum), raw_buffer, 8);
+	}
+    }
+  for (regnum = 0; regnum < SP_REGNUM; regnum++)
+    {
+      if (fsr.regs[regnum])
+	{
+	  write_register (regnum, read_memory_unsigned_integer (fsr.regs[regnum], 4));
+	}
+    }
+  if (fsr.regs[PSW_REGNUM])
+    {
+      write_register (PSW_REGNUM, read_memory_unsigned_integer (fsr.regs[PSW_REGNUM], 4));
+    }
+
+  write_register (PC_REGNUM, read_register(LR_REGNUM));
+  write_register (SP_REGNUM, fp + frame->size);
+  target_store_registers (-1);
+  flush_cached_frames ();
+}
+
+static int 
+check_prologue (op)
+     unsigned long op;
+{
+  /* add sp,sp,imm -- observed */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_ADD_SP_IMM)
+    return 1;
+
+  /* add r22,sp,imm -- observed */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_ADD_R22_SP_IMM)
+    return 1;
+
+  /* or  fp,r0,sp -- observed */
+  if (op == OP_OR_FP_R0_SP)
+    return 1;
+
+  /* nop */
+  if ((op & OP_MASK_OPCODE) == OP_NOP)
+    return 1;
+
+  /* stw  Ra,@(sp,r0) */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_SP_R0)
+    return 1;
+
+  /* stw  Ra,@(sp,0x0) */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_SP_IMM0)
+    return 1;
+
+  /* st2w  Ra,@(sp,r0) */
+ if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SP_R0)
+   return 1;
+
+  /* st2w  Ra,@(sp,0x0) */
+ if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SP_IMM0)
+   return 1;
+
+ /* stw fp, @(r22+,r0) -- observed */
+ if (op == OP_STW_FP_R22P_R0)
+   return 1;
+
+ /* stw r62, @(r22+,r0) -- observed */
+ if (op == OP_STW_LR_R22P_R0)
+   return 1;
+
+ /* stw Ra, @(fp,r0) -- observed */
+ if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_FP_R0)
+   return 1;			/* first arg */
+
+ /* stw Ra, @(fp,imm) -- observed */
+ if ((op & OP_MASK_OP_AND_RB) == OP_STW_FP_IMM)
+   return 1;			/* second and subsequent args */
+
+ /* stw fp,@(sp,imm) -- observed */
+ if ((op & OP_MASK_ALL_BUT_IMM) == OP_STW_FP_SP_IMM)
+   return 1;
+
+ /* st2w Ra,@(r22+,r0) */
+ if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_R22P_R0)
+   return 1;
+
+  /* stw  Ra, @(sp-) */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_SPM)
+    return 1;
+
+  /* st2w  Ra, @(sp-) */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SPM)
+    return 1;
+
+  /* sub.?  sp,sp,imm */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_SUB_SP_IMM)
+    return 1;
+
+  return 0;
+}
+
+CORE_ADDR
+d30v_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  unsigned long op[2];
+  unsigned long opl, opr;	/* left / right sub operations */
+  unsigned long fm0, fm1;	/* left / right mode bits */
+  unsigned long cc0, cc1;
+  unsigned long op1, op2;
+  CORE_ADDR func_addr, func_end;
+  struct symtab_and_line sal;
+
+  /* If we have line debugging information, then the end of the */
+  /* prologue should the first assembly instruction of  the first source line */
+  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    {
+      sal = find_pc_line (func_addr, 0);
+      if ( sal.end && sal.end < func_end)
+	return sal.end;
+    }
+  
+  if (target_read_memory (pc, (char *)&op[0], 8))
+    return pc;			/* Can't access it -- assume no prologue. */
+
+  while (1)
+    {
+      opl = (unsigned long)read_memory_integer (pc, 4);
+      opr = (unsigned long)read_memory_integer (pc+4, 4);
+
+      fm0 = (opl & OP_MASK_FM_BIT);
+      fm1 = (opr & OP_MASK_FM_BIT);
+
+      cc0 = (opl & OP_MASK_CC_BITS);
+      cc1 = (opr & OP_MASK_CC_BITS);
+
+      opl = (opl & OP_MASK_SUB_INST);
+      opr = (opr & OP_MASK_SUB_INST);
+
+      if (fm0 && fm1)
+	{
+	  /* long instruction (opl contains the opcode) */
+	  if (((opl & OP_MASK_ALL_BUT_IMM) != OP_ADD_SP_IMM) && /* add sp,sp,imm */
+	      ((opl & OP_MASK_ALL_BUT_IMM) != OP_ADD_R22_SP_IMM) && /* add r22,sp,imm */
+	      ((opl & OP_MASK_OP_AND_RB) != OP_STW_SP_IMM) && /* stw Ra, @(sp,imm) */
+	      ((opl & OP_MASK_OP_AND_RB) != OP_ST2W_SP_IMM)) /* st2w Ra, @(sp,imm) */
+	    break;
+	}
+      else
+	{
+	  /* short instructions */
+	  if (fm0 && !fm1)
+	    {
+	      op1 = opr;
+	      op2 = opl;
+	    } 
+	  else 
+	    {
+	      op1 = opl;
+	      op2 = opr;
+	    }
+	  if (check_prologue(op1))
+	    {
+	      if (!check_prologue(op2))
+		{
+		  /* if the previous opcode was really part of the prologue */
+		  /* and not just a NOP, then we want to break after both instructions */
+		  if ((op1 & OP_MASK_OPCODE) != OP_NOP)
+		    pc += 8;
+		  break;
+		}
+	    }
+	  else
+	    break;
+	}
+      pc += 8;
+    }
+  return pc;
+}
+
+static int end_of_stack;
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+*/
+
+CORE_ADDR
+d30v_frame_chain (frame)
+     struct frame_info *frame;
+{
+  struct frame_saved_regs fsr;
+
+  d30v_frame_find_saved_regs (frame, &fsr);
+
+  if (end_of_stack)
+    return (CORE_ADDR)0;
+
+  if (frame->return_pc == IMEM_START)
+    return (CORE_ADDR)0;
+
+  if (!fsr.regs[FP_REGNUM])
+    {
+      if (!fsr.regs[SP_REGNUM] || fsr.regs[SP_REGNUM] == STACK_START)
+	return (CORE_ADDR)0;
+      
+      return fsr.regs[SP_REGNUM];
+    }
+
+  if (!read_memory_unsigned_integer(fsr.regs[FP_REGNUM],4))
+    return (CORE_ADDR)0;
+
+  return read_memory_unsigned_integer(fsr.regs[FP_REGNUM],4);
+}  
+
+static int next_addr, uses_frame;
+static int frame_size;
+
+static int 
+prologue_find_regs (op, fsr, addr)
+     unsigned long op;
+     struct frame_saved_regs *fsr;
+     CORE_ADDR addr;
+{
+  int n;
+  int offset;
+
+  /* add sp,sp,imm -- observed */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_ADD_SP_IMM)
+    {
+      offset = EXTRACT_IMM6(op);
+      /*next_addr += offset;*/
+      frame_size += -offset;
+      return 1;
+    }
+
+  /* add r22,sp,imm -- observed */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_ADD_R22_SP_IMM)
+    {
+      offset = EXTRACT_IMM6(op);
+      next_addr = (offset - frame_size);
+      return 1;
+    }
+
+  /* stw Ra, @(fp, offset) -- observed */
+  if ((op & OP_MASK_OP_AND_RB) == OP_STW_FP_IMM)
+    {
+      n = EXTRACT_RA(op);
+      offset = EXTRACT_IMM6(op);
+      fsr->regs[n] = (offset - frame_size);
+      return 1;
+    }
+
+  /* stw Ra, @(fp, r0) -- observed */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_FP_R0)
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = (- frame_size);
+      return 1;
+    }
+
+  /* or  fp,0,sp -- observed */
+  if ((op == OP_OR_FP_R0_SP) ||
+      (op == OP_OR_FP_SP_R0) ||
+      (op == OP_OR_FP_IMM0_SP))
+    {
+      uses_frame = 1;
+      return 1;
+    }
+
+  /* nop */
+  if ((op & OP_MASK_OPCODE) == OP_NOP)
+    return 1;
+
+  /* stw Ra,@(r22+,r0) -- observed */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_R22P_R0)
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = next_addr;
+      next_addr += 4;
+      return 1;
+    }
+#if 0				/* subsumed in pattern above */
+  /* stw fp,@(r22+,r0) -- observed */
+  if (op == OP_STW_FP_R22P_R0)
+    {
+      fsr->regs[FP_REGNUM] = next_addr;	/* XXX */
+      next_addr += 4;
+      return 1;
+    }
+
+  /* stw r62,@(r22+,r0) -- observed */
+  if (op == OP_STW_LR_R22P_R0)
+    {
+      fsr->regs[LR_REGNUM] = next_addr;
+      next_addr += 4;
+      return 1;
+    }
+#endif
+  /* st2w Ra,@(r22+,r0) -- observed */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_R22P_R0)
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = next_addr;
+      fsr->regs[n+1] = next_addr + 4;
+      next_addr += 8;
+      return 1;
+    }
+
+  /* stw  rn, @(sp-) */
+  if ((op & OP_MASK_ALL_BUT_RA) == OP_STW_SPM)
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = next_addr;
+      next_addr -= 4;
+      return 1;
+    }
+
+  /* st2w  Ra, @(sp-) */
+  else if ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SPM)
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = next_addr;
+      fsr->regs[n+1] = next_addr+4;
+      next_addr -= 8;
+      return 1;
+    }
+
+  /* sub  sp,sp,imm */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_SUB_SP_IMM)
+    {
+      offset = EXTRACT_IMM6(op);
+      frame_size += -offset;
+      return 1;
+    }
+
+  /* st  rn, @(sp,0) -- observed */
+  if (((op & OP_MASK_ALL_BUT_RA) == OP_STW_SP_R0) ||
+      ((op & OP_MASK_ALL_BUT_RA) == OP_STW_SP_IMM0))
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = (- frame_size);
+      return 1;
+    }
+
+  /* st2w  rn, @(sp,0) */
+  if (((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SP_R0) ||
+      ((op & OP_MASK_ALL_BUT_RA) == OP_ST2W_SP_IMM0))
+    {
+      n = EXTRACT_RA(op);
+      fsr->regs[n] = (- frame_size);
+      fsr->regs[n+1] = (- frame_size) + 4;
+      return 1;
+    }
+
+  /* stw fp,@(sp,imm) -- observed */
+  if ((op & OP_MASK_ALL_BUT_IMM) == OP_STW_FP_SP_IMM)
+    {
+      offset = EXTRACT_IMM6(op);
+      fsr->regs[FP_REGNUM] = (offset - frame_size);
+      return 1;
+    }
+  return 0;
+}
+
+/* Put here the code to store, into a struct frame_saved_regs, the
+   addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special: the address we
+   return for it IS the sp for the next frame. */
+void
+d30v_frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  CORE_ADDR fp, pc;
+  unsigned long opl, opr;
+  unsigned long op1, op2;
+  unsigned long fm0, fm1;
+  int i;
+
+  fp = fi->frame;
+  memset (fsr, 0, sizeof (*fsr));
+  next_addr = 0;
+  frame_size = 0;
+  end_of_stack = 0;
+
+  uses_frame = 0;
+
+  d30v_frame_find_saved_regs_offsets (fi, fsr);
+  
+  fi->size = frame_size;
+
+  if (!fp)
+    fp = read_register(SP_REGNUM);
+
+  for (i=0; i<NUM_REGS-1; i++)
+    if (fsr->regs[i])
+      {
+	fsr->regs[i] = fsr->regs[i] + fp + frame_size;
+      }
+
+  if (fsr->regs[LR_REGNUM])
+    fi->return_pc = read_memory_unsigned_integer(fsr->regs[LR_REGNUM],4);
+  else
+    fi->return_pc = read_register(LR_REGNUM);
+  
+  /* the SP is not normally (ever?) saved, but check anyway */
+  if (!fsr->regs[SP_REGNUM])
+    {
+      /* if the FP was saved, that means the current FP is valid, */
+      /* otherwise, it isn't being used, so we use the SP instead */
+      if (uses_frame)
+	fsr->regs[SP_REGNUM] = read_register(FP_REGNUM) + fi->size;
+      else
+	{
+	  fsr->regs[SP_REGNUM] = fp + fi->size;
+	  fi->frameless = 1;
+	  fsr->regs[FP_REGNUM] = 0;
+	}
+    }
+}
+
+void
+d30v_frame_find_saved_regs_offsets (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  CORE_ADDR fp, pc;
+  unsigned long opl, opr;
+  unsigned long op1, op2;
+  unsigned long fm0, fm1;
+  int i;
+
+  fp = fi->frame;
+  memset (fsr, 0, sizeof (*fsr));
+  next_addr = 0;
+  frame_size = 0;
+  end_of_stack = 0;
+
+  pc = get_pc_function_start (fi->pc);
+
+  uses_frame = 0;
+  while (pc < fi->pc)
+    {
+      opl = (unsigned long)read_memory_integer (pc, 4);
+      opr = (unsigned long)read_memory_integer (pc+4, 4);
+
+      fm0 = (opl & OP_MASK_FM_BIT);
+      fm1 = (opr & OP_MASK_FM_BIT);
+
+      opl = (opl & OP_MASK_SUB_INST);
+      opr = (opr & OP_MASK_SUB_INST);
+
+      if (fm0 && fm1)
+	{
+	  /* long instruction */
+	  if ((opl & OP_MASK_ALL_BUT_IMM) == OP_ADD_SP_IMM)
+	    {
+	      /* add sp,sp,n */
+	      long offset = EXTRACT_IMM32(opl, opr);
+	      frame_size += -offset;
+	    }
+	  else if ((opl & OP_MASK_ALL_BUT_IMM) == OP_ADD_R22_SP_IMM)
+	    {
+	      /* add r22,sp,offset */
+	      long offset = EXTRACT_IMM32(opl,opr);
+	      next_addr = (offset - frame_size);
+	    }
+	  else if ((opl & OP_MASK_OP_AND_RB) == OP_STW_SP_IMM)
+	    {
+	      /* st Ra, @(sp,imm) */
+	      long offset = EXTRACT_IMM32(opl, opr);
+	      short n = EXTRACT_RA(opl);
+	      fsr->regs[n] = (offset - frame_size);
+	    }
+	  else if ((opl & OP_MASK_OP_AND_RB) == OP_ST2W_SP_IMM)
+	    {
+	      /* st2w Ra, @(sp,offset) */
+	      long offset = EXTRACT_IMM32(opl, opr);
+	      short n = EXTRACT_RA(opl);
+	      fsr->regs[n] = (offset - frame_size);
+	      fsr->regs[n+1] = (offset - frame_size) + 4;
+	    }
+	  else if ((opl & OP_MASK_ALL_BUT_IMM) == OP_OR_SP_R0_IMM)
+	    {
+	      end_of_stack = 1;
+	    }
+	  else
+	    break;
+	}
+      else
+	{
+	  /* short instructions */
+	  if (fm0 && !fm1)
+	    {
+	      op2 = opl;
+	      op1 = opr;
+	    } 
+	  else 
+	    {
+	      op1 = opl;
+	      op2 = opr;
+	    }
+	  if (!prologue_find_regs(op1,fsr,pc) || !prologue_find_regs(op2,fsr,pc))
+	    break;
+	}
+      pc += 8;
+    }
+  
+#if 0
+  fi->size = frame_size;
+
+  if (!fp)
+    fp = read_register(SP_REGNUM);
+
+  for (i=0; i<NUM_REGS-1; i++)
+    if (fsr->regs[i])
+      {
+	fsr->regs[i] = fsr->regs[i] + fp + frame_size;
+      }
+
+  if (fsr->regs[LR_REGNUM])
+    fi->return_pc = read_memory_unsigned_integer(fsr->regs[LR_REGNUM],4);
+  else
+    fi->return_pc = read_register(LR_REGNUM);
+  
+  /* the SP is not normally (ever?) saved, but check anyway */
+  if (!fsr->regs[SP_REGNUM])
+    {
+      /* if the FP was saved, that means the current FP is valid, */
+      /* otherwise, it isn't being used, so we use the SP instead */
+      if (uses_frame)
+	fsr->regs[SP_REGNUM] = read_register(FP_REGNUM) + fi->size;
+      else
+	{
+	  fsr->regs[SP_REGNUM] = fp + fi->size;
+	  fi->frameless = 1;
+	  fsr->regs[FP_REGNUM] = 0;
+	}
+    }
+#endif
+}
+
+void
+d30v_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  struct frame_saved_regs dummy;
+
+  if (fi->next && (fi->pc == 0))
+    fi->pc = fi->next->return_pc; 
+
+  d30v_frame_find_saved_regs_offsets (fi, &dummy);
+
+  if (uses_frame == 0)
+    fi->frameless = 1;
+  else
+    fi->frameless = 0;
+
+  if ((fi->next == 0) && (uses_frame == 0))
+    /* innermost frame and it's "frameless",
+       so the fi->frame field is wrong, fix it! */
+    fi->frame = read_sp ();
+
+  if (dummy.regs[LR_REGNUM])
+    {
+      /* it was saved, grab it! */
+      dummy.regs[LR_REGNUM] += (fi->frame + frame_size);
+      fi->return_pc = read_memory_unsigned_integer(dummy.regs[LR_REGNUM],4);
+    }
+  else
+    fi->return_pc = read_register(LR_REGNUM);
+}
+
+void
+d30v_init_frame_pc (fromleaf, prev)
+     int fromleaf;
+     struct frame_info *prev;
+{
+  /* default value, put here so we can breakpoint on it and
+     see if the default value is really the right thing to use */
+  prev->pc = (fromleaf ? SAVED_PC_AFTER_CALL (prev->next) : \
+	      prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+}
+
+static void d30v_print_register PARAMS ((int regnum, int tabular));
+
+static void
+d30v_print_register (regnum, tabular)
+     int regnum;
+     int tabular;
+{
+  if (regnum < A0_REGNUM)
+    {
+      if (tabular)
+	printf_filtered ("%08x", read_register (regnum));
+      else
+	printf_filtered ("0x%x	%d", read_register (regnum),
+			 read_register (regnum));
+    }
+  else
+    {
+      char regbuf[MAX_REGISTER_RAW_SIZE];
+
+      read_relative_register_raw_bytes (regnum, regbuf);
+
+      val_print (REGISTER_VIRTUAL_TYPE (regnum), regbuf, 0, 0,
+		 gdb_stdout, 'x', 1, 0, Val_pretty_default);
+
+      if (!tabular)
+	{
+	  printf_filtered ("	");
+	  val_print (REGISTER_VIRTUAL_TYPE (regnum), regbuf, 0, 0,
+		 gdb_stdout, 'd', 1, 0, Val_pretty_default);
+	}
+    }
+}
+
+static void
+d30v_print_flags ()
+{
+  long psw = read_register (PSW_REGNUM);
+  printf_filtered ("flags #1");
+  printf_filtered ("   (sm) %d", (psw & PSW_SM) != 0);
+  printf_filtered ("   (ea) %d", (psw & PSW_EA) != 0);
+  printf_filtered ("   (db) %d", (psw & PSW_DB) != 0);
+  printf_filtered ("   (ds) %d", (psw & PSW_DS) != 0);
+  printf_filtered ("   (ie) %d", (psw & PSW_IE) != 0);
+  printf_filtered ("   (rp) %d", (psw & PSW_RP) != 0);
+  printf_filtered ("   (md) %d\n", (psw & PSW_MD) != 0);
+
+  printf_filtered ("flags #2");
+  printf_filtered ("   (f0) %d", (psw & PSW_F0) != 0);
+  printf_filtered ("   (f1) %d", (psw & PSW_F1) != 0);
+  printf_filtered ("   (f2) %d", (psw & PSW_F2) != 0);
+  printf_filtered ("   (f3) %d", (psw & PSW_F3) != 0);
+  printf_filtered ("    (s) %d", (psw & PSW_S) != 0);
+  printf_filtered ("    (v) %d", (psw & PSW_V) != 0);
+  printf_filtered ("   (va) %d", (psw & PSW_VA) != 0);
+  printf_filtered ("    (c) %d\n", (psw & PSW_C) != 0);
+}
+
+static void
+print_flags_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  d30v_print_flags ();
+}
+
+void
+d30v_do_registers_info (regnum, fpregs)
+     int regnum;
+     int fpregs;
+{
+  long long num1, num2;
+  long psw;
+
+  if (regnum != -1)
+    {
+      if (REGISTER_NAME (0) == NULL || REGISTER_NAME (0)[0] == '\000')
+	return;
+
+      printf_filtered ("%s ", REGISTER_NAME (regnum));
+      d30v_print_register (regnum, 0);
+
+      printf_filtered ("\n");
+      return;
+    }
+
+  /* Have to print all the registers.  Format them nicely.  */
+
+  printf_filtered ("PC=");
+  print_address (read_pc (), gdb_stdout);
+
+  printf_filtered (" PSW=");
+  d30v_print_register (PSW_REGNUM, 1);
+
+  printf_filtered (" BPC=");
+  print_address (read_register (BPC_REGNUM), gdb_stdout);
+
+  printf_filtered (" BPSW=");
+  d30v_print_register (BPSW_REGNUM, 1);
+  printf_filtered ("\n");
+
+  printf_filtered ("DPC=");
+  print_address (read_register (DPC_REGNUM), gdb_stdout);
+
+  printf_filtered (" DPSW=");
+  d30v_print_register (DPSW_REGNUM, 1);
+
+  printf_filtered (" IBA=");
+  print_address (read_register (IBA_REGNUM), gdb_stdout);
+  printf_filtered ("\n");
+
+  printf_filtered ("RPT_C=");
+  d30v_print_register (RPT_C_REGNUM, 1);
+
+  printf_filtered (" RPT_S=");
+  print_address (read_register (RPT_S_REGNUM), gdb_stdout);
+
+  printf_filtered (" RPT_E=");
+  print_address (read_register (RPT_E_REGNUM), gdb_stdout);
+  printf_filtered ("\n");
+
+  printf_filtered ("MOD_S=");
+  print_address (read_register (MOD_S_REGNUM), gdb_stdout);
+
+  printf_filtered (" MOD_E=");
+  print_address (read_register (MOD_E_REGNUM), gdb_stdout);
+  printf_filtered ("\n");
+
+  printf_filtered ("EIT_VB=");
+  print_address (read_register (EIT_VB_REGNUM), gdb_stdout);
+
+  printf_filtered (" INT_S=");
+  d30v_print_register (INT_S_REGNUM, 1);
+
+  printf_filtered (" INT_M=");
+  d30v_print_register (INT_M_REGNUM, 1);
+  printf_filtered ("\n");
+
+  d30v_print_flags ();
+  for (regnum = 0; regnum <= 63;)
+    {
+      int i;
+
+      printf_filtered ("R%d-R%d ", regnum, regnum + 7);
+      if (regnum < 10)
+	printf_filtered (" ");
+      if (regnum + 7 < 10)
+	printf_filtered (" ");
+
+      for (i = 0; i < 8; i++)
+	{
+	  printf_filtered (" ");
+	  d30v_print_register (regnum++, 1);
+	}
+
+      printf_filtered ("\n");
+    }
+
+  printf_filtered ("A0-A1    ");
+
+  d30v_print_register (A0_REGNUM, 1);
+  printf_filtered ("    ");
+  d30v_print_register (A1_REGNUM, 1);
+  printf_filtered ("\n");
+}
+
+CORE_ADDR
+d30v_fix_call_dummy (dummyname, start_sp, fun, nargs, args, type, gcc_p)
+     char *dummyname;
+     CORE_ADDR start_sp;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  int regnum;
+  CORE_ADDR sp;
+  char buffer[MAX_REGISTER_RAW_SIZE];
+  struct frame_info *frame = get_current_frame ();
+  frame->dummy = start_sp;
+  /*start_sp |= DMEM_START;*/
+
+  sp = start_sp;
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    {
+      sp -= REGISTER_RAW_SIZE(regnum);
+      store_address (buffer, REGISTER_RAW_SIZE(regnum), read_register(regnum));
+      write_memory (sp, buffer, REGISTER_RAW_SIZE(regnum));
+    }
+  write_register (SP_REGNUM, (LONGEST)sp);
+  /* now we need to load LR with the return address */
+  write_register (LR_REGNUM, (LONGEST)d30v_call_dummy_address());  
+  return sp;
+}
+
+static void
+d30v_pop_dummy_frame (fi)
+     struct frame_info *fi;
+{
+  CORE_ADDR sp = fi->dummy;
+  int regnum;
+
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    {
+      sp -= REGISTER_RAW_SIZE(regnum);
+      write_register(regnum, read_memory_unsigned_integer (sp, REGISTER_RAW_SIZE(regnum)));
+    }
+  flush_cached_frames (); /* needed? */
+}
+
+
+CORE_ADDR
+d30v_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  int i, len, index=0, regnum=2;
+  char buffer[4], *contents;
+  LONGEST val;
+  CORE_ADDR ptrs[10];
+
+#if 0
+  /* Pass 1. Put all large args on stack */
+  for (i = 0; i < nargs; i++)
+    {
+      value_ptr arg = args[i];
+      struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+      len = TYPE_LENGTH (arg_type);
+      contents = VALUE_CONTENTS(arg);
+      val = extract_signed_integer (contents, len);
+      if (len > 4)
+	{
+	  /* put on stack and pass pointers */
+	  sp -= len;
+	  write_memory (sp, contents, len);
+	  ptrs[index++] = sp;
+	}
+    }
+#endif
+  index = 0;
+
+  for (i = 0; i < nargs; i++)
+    {
+      value_ptr arg = args[i];
+      struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+      len = TYPE_LENGTH (arg_type);
+      contents = VALUE_CONTENTS(arg);
+      if (len > 4)
+	{
+	  /* we need multiple registers */
+	  int ndx;
+
+	  for (ndx = 0; len > 0; ndx += 8, len -= 8)
+	    {
+	      if (regnum & 1)
+		regnum++;	/* all args > 4 bytes start in even register */
+
+	      if (regnum < 18)
+		{
+		  val = extract_signed_integer (&contents[ndx], 4);
+		  write_register (regnum++, val);
+
+		  if (len >= 8)
+		    val = extract_signed_integer (&contents[ndx+4], 4);
+		  else
+		    val = extract_signed_integer (&contents[ndx+4], len-4);
+		  write_register (regnum++, val);
+		}
+	      else
+		{
+		  /* no more registers available.  put it on the stack */
+
+		  /* all args > 4 bytes are padded to a multiple of 8 bytes
+		   and start on an 8 byte boundary */
+		  if (sp & 7)
+		    sp -= (sp & 7); /* align it */
+
+		  sp -= ((len + 7) & ~7); /* allocate space */
+		  write_memory (sp, &contents[ndx], len);
+		  break;
+		}
+	    }
+	}
+      else
+	{
+	  if (regnum < 18 )
+	    {
+	      val = extract_signed_integer (contents, len);
+	      write_register (regnum++, val);
+	    }
+	  else
+	    {
+	      /* all args are padded to a multiple of 4 bytes (at least) */
+	      sp -= ((len + 3) & ~3);
+	      write_memory (sp, contents, len);
+	    }
+	}
+    }
+  if (sp & 7)
+    /* stack pointer is not on an 8 byte boundary -- align it */
+    sp -= (sp & 7);
+  return sp;
+}
+
+
+/* pick an out-of-the-way place to set the return value */
+/* for an inferior function call.  The link register is set to this  */
+/* value and a momentary breakpoint is set there.  When the breakpoint */
+/* is hit, the dummy frame is popped and the previous environment is */
+/* restored. */
+
+CORE_ADDR
+d30v_call_dummy_address ()
+{
+  CORE_ADDR entry;
+  struct minimal_symbol *sym;
+
+  entry = entry_point_address ();
+
+  if (entry != 0)
+    return entry;
+
+  sym = lookup_minimal_symbol ("_start", NULL, symfile_objfile);
+
+  if (!sym || MSYMBOL_TYPE (sym) != mst_text)
+    return 0;
+  else
+    return SYMBOL_VALUE_ADDRESS (sym);
+}
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   extract and copy its value into `valbuf'.  */
+
+void
+d30v_extract_return_value (valtype, regbuf, valbuf)
+     struct type *valtype;
+     char regbuf[REGISTER_BYTES];
+     char *valbuf;
+{
+  memcpy (valbuf, regbuf + REGISTER_BYTE (2), TYPE_LENGTH (valtype));
+}
+
+/* The following code implements access to, and display of, the D30V's
+   instruction trace buffer.  The buffer consists of 64K or more
+   4-byte words of data, of which each words includes an 8-bit count,
+   an 8-bit segment number, and a 16-bit instruction address.
+
+   In theory, the trace buffer is continuously capturing instruction
+   data that the CPU presents on its "debug bus", but in practice, the
+   ROMified GDB stub only enables tracing when it continues or steps
+   the program, and stops tracing when the program stops; so it
+   actually works for GDB to read the buffer counter out of memory and
+   then read each trace word.  The counter records where the tracing
+   stops, but there is no record of where it started, so we remember
+   the PC when we resumed and then search backwards in the trace
+   buffer for a word that includes that address.  This is not perfect,
+   because you will miss trace data if the resumption PC is the target
+   of a branch.  (The value of the buffer counter is semi-random, any
+   trace data from a previous program stop is gone.)  */
+
+/* The address of the last word recorded in the trace buffer.  */
+
+#define DBBC_ADDR (0xd80000)
+
+/* The base of the trace buffer, at least for the "Board_0".  */
+
+#define TRACE_BUFFER_BASE (0xf40000)
+
+static void trace_command PARAMS ((char *, int));
+
+static void untrace_command PARAMS ((char *, int));
+
+static void trace_info PARAMS ((char *, int));
+
+static void tdisassemble_command PARAMS ((char *, int));
+
+static void display_trace PARAMS ((int, int));
+
+/* True when instruction traces are being collected.  */
+
+static int tracing;
+
+/* Remembered PC.  */
+
+static CORE_ADDR last_pc;
+
+/* True when trace output should be displayed whenever program stops.  */
+
+static int trace_display;
+
+/* True when trace listing should include source lines.  */
+
+static int default_trace_show_source = 1;
+
+struct trace_buffer {
+  int size;
+  short *counts;
+  CORE_ADDR *addrs;
+} trace_data;
+
+static void
+trace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* Clear the host-side trace buffer, allocating space if needed.  */
+  trace_data.size = 0;
+  if (trace_data.counts == NULL)
+    trace_data.counts = (short *) xmalloc (65536 * sizeof(short));
+  if (trace_data.addrs == NULL)
+    trace_data.addrs = (CORE_ADDR *) xmalloc (65536 * sizeof(CORE_ADDR));
+
+  tracing = 1;
+
+  printf_filtered ("Tracing is now on.\n");
+}
+
+static void
+untrace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  tracing = 0;
+
+  printf_filtered ("Tracing is now off.\n");
+}
+
+static void
+trace_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int i;
+
+  if (trace_data.size)
+    {
+      printf_filtered ("%d entries in trace buffer:\n", trace_data.size);
+
+      for (i = 0; i < trace_data.size; ++i)
+	{
+	  printf_filtered ("%d: %d instruction%s at 0x%x\n",
+			   i, trace_data.counts[i],
+			   (trace_data.counts[i] == 1 ? "" : "s"),
+			   trace_data.addrs[i]);
+	}
+    }
+  else
+    printf_filtered ("No entries in trace buffer.\n");
+
+  printf_filtered ("Tracing is currently %s.\n", (tracing ? "on" : "off"));
+}
+
+/* Print the instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+static int
+print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     GDB_FILE *stream;
+{
+  /* If there's no disassembler, something is very wrong.  */
+  if (tm_print_insn == NULL)
+    abort ();
+
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    tm_print_insn_info.endian = BFD_ENDIAN_BIG;
+  else
+    tm_print_insn_info.endian = BFD_ENDIAN_LITTLE;
+  return (*tm_print_insn) (memaddr, &tm_print_insn_info);
+}
+
+void
+d30v_eva_prepare_to_trace ()
+{
+  if (!tracing)
+    return;
+
+  last_pc = read_register (PC_REGNUM);
+}
+
+/* Collect trace data from the target board and format it into a form
+   more useful for display.  */
+
+void
+d30v_eva_get_trace_data ()
+{
+  int count, i, j, oldsize;
+  int trace_addr, trace_seg, trace_cnt, next_cnt;
+  unsigned int last_trace, trace_word, next_word;
+  unsigned int *tmpspace;
+
+  if (!tracing)
+    return;
+
+  tmpspace = xmalloc (65536 * sizeof(unsigned int));
+
+  last_trace = read_memory_unsigned_integer (DBBC_ADDR, 2) << 2;
+
+  /* Collect buffer contents from the target, stopping when we reach
+     the word recorded when execution resumed.  */
+
+  count = 0;
+  while (last_trace > 0)
+    {
+      QUIT;
+      trace_word =
+	read_memory_unsigned_integer (TRACE_BUFFER_BASE + last_trace, 4);
+      trace_addr = trace_word & 0xffff;
+      last_trace -= 4;
+      /* Ignore an apparently nonsensical entry.  */
+      if (trace_addr == 0xffd5)
+	continue;
+      tmpspace[count++] = trace_word;
+      if (trace_addr == last_pc)
+	break;
+      if (count > 65535)
+	break;
+    }
+
+  /* Move the data to the host-side trace buffer, adjusting counts to
+     include the last instruction executed and transforming the address
+     into something that GDB likes.  */
+
+  for (i = 0; i < count; ++i)
+    {
+      trace_word = tmpspace[i];
+      next_word = ((i == 0) ? 0 : tmpspace[i - 1]);
+      trace_addr = trace_word & 0xffff;
+      next_cnt = (next_word >> 24) & 0xff;
+      j = trace_data.size + count - i - 1;
+      trace_data.addrs[j] = (trace_addr << 2) + 0x1000000;
+      trace_data.counts[j] = next_cnt + 1;
+    }
+
+  oldsize = trace_data.size;
+  trace_data.size += count;
+
+  free (tmpspace);
+
+  if (trace_display)
+    display_trace (oldsize, trace_data.size);
+}
+
+static void
+tdisassemble_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int i, count;
+  CORE_ADDR low, high;
+  char *space_index;
+
+  if (!arg)
+    {
+      low = 0;
+      high = trace_data.size;
+    }
+  else if (!(space_index = (char *) strchr (arg, ' ')))
+    {
+      low = parse_and_eval_address (arg);
+      high = low + 5;
+    }
+  else
+    {
+      /* Two arguments.  */
+      *space_index = '\0';
+      low = parse_and_eval_address (arg);
+      high = parse_and_eval_address (space_index + 1);
+      if (high < low)
+	high = low;
+    }
+
+  printf_filtered ("Dump of trace from %d to %d:\n", low, high);
+
+  display_trace (low, high);
+
+  printf_filtered ("End of trace dump.\n");
+  gdb_flush (gdb_stdout);
+}
+
+static void
+display_trace (low, high)
+     int low, high;
+{
+  int i, count, trace_show_source, first, suppress;
+  CORE_ADDR next_address;
+
+  trace_show_source = default_trace_show_source;
+  if (!have_full_symbols () && !have_partial_symbols())
+    {
+      trace_show_source = 0;
+      printf_filtered ("No symbol table is loaded.  Use the \"file\" command.\n");
+      printf_filtered ("Trace will not display any source.\n");
+    }
+
+  first = 1;
+  suppress = 0;
+  for (i = low; i < high; ++i)
+    {
+      next_address = trace_data.addrs[i];
+      count = trace_data.counts[i]; 
+      while (count-- > 0)
+	{
+	  QUIT;
+	  if (trace_show_source)
+	    {
+	      struct symtab_and_line sal, sal_prev;
+
+	      sal_prev = find_pc_line (next_address - 4, 0);
+	      sal = find_pc_line (next_address, 0);
+
+	      if (sal.symtab)
+		{
+		  if (first || sal.line != sal_prev.line)
+		    print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
+		  suppress = 0;
+		}
+	      else
+		{
+		  if (!suppress)
+		    /* FIXME-32x64--assumes sal.pc fits in long.  */
+		    printf_filtered ("No source file for address %s.\n",
+				     local_hex_string((unsigned long) sal.pc));
+		  suppress = 1;
+		}
+	    }
+	  first = 0;
+	  print_address (next_address, gdb_stdout);
+	  printf_filtered (":");
+	  printf_filtered ("\t");
+	  wrap_here ("    ");
+	  next_address = next_address + print_insn (next_address, gdb_stdout);
+	  printf_filtered ("\n");
+	  gdb_flush (gdb_stdout);
+	}
+    }
+}
+
+extern void (*target_resume_hook) PARAMS ((void));
+extern void (*target_wait_loop_hook) PARAMS ((void));
+
+void
+_initialize_d30v_tdep ()
+{
+  tm_print_insn = print_insn_d30v;
+
+  target_resume_hook = d30v_eva_prepare_to_trace;
+  target_wait_loop_hook = d30v_eva_get_trace_data;
+
+  add_info ("flags", print_flags_command, "Print d30v flags.");
+
+  add_com ("trace", class_support, trace_command,
+	   "Enable tracing of instruction execution.");
+
+  add_com ("untrace", class_support, untrace_command,
+ 	   "Disable tracing of instruction execution.");
+
+  add_com ("tdisassemble", class_vars, tdisassemble_command,
+	   "Disassemble the trace buffer.\n\
+Two optional arguments specify a range of trace buffer entries\n\
+as reported by info trace (NOT addresses!).");
+
+  add_info ("trace", trace_info,
+	    "Display info about the trace data buffer.");
+
+  add_show_from_set (add_set_cmd ("tracedisplay", no_class,
+				  var_integer, (char *)&trace_display,
+				  "Set automatic display of trace.\n", &setlist),
+		     &showlist);
+  add_show_from_set (add_set_cmd ("tracesource", no_class,
+				  var_integer, (char *)&default_trace_show_source,
+				  "Set display of source code with trace.\n", &setlist),
+		     &showlist);
+
+} 
diff --git a/gdb/dbug-rom.c b/gdb/dbug-rom.c
new file mode 100644
index 0000000..fa9c974
--- /dev/null
+++ b/gdb/dbug-rom.c
@@ -0,0 +1,164 @@
+/* Remote debugging interface to dBUG ROM monitor for GDB, the GNU debugger.
+   Copyright 1996 Free Software Foundation, Inc.
+
+   Written by Stan Shebs of Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* dBUG is a monitor supplied on various Motorola boards, including
+   m68k, ColdFire, and PowerPC-based designs.  The code here assumes
+   the ColdFire, and (as of 9/25/96) has only been tested with a
+   ColdFire IDP board.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void dbug_open PARAMS ((char *args, int from_tty));
+
+static void
+dbug_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+
+  switch (regname[0])
+    {
+    case 'S':
+      if (regname[1] != 'R')
+	return;
+      regno = PS_REGNUM;
+      break;
+    case 'P':
+      if (regname[1] != 'C')
+	return;
+      regno = PC_REGNUM;
+      break;
+    case 'D':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + D0_REGNUM;
+      break;
+    case 'A':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + A0_REGNUM;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/* This array of registers needs to match the indexes used by GDB. The
+   whole reason this exists is because the various ROM monitors use
+   different names than GDB does, and don't support all the registers
+   either. So, typing "info reg sp" becomes an "A7". */
+
+static char *dbug_regnames[NUM_REGS] =
+{
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+  "SR", "PC"
+  /* no float registers */
+};
+static struct target_ops dbug_ops;
+static struct monitor_ops dbug_cmds ;
+
+static char *dbug_inits[] = {"\r", NULL};
+
+
+static void 
+init_dbug_cmds(void)
+{
+  dbug_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_GETMEM_NEEDS_RANGE | MO_FILL_USES_ADDR;
+  dbug_cmds.init =   dbug_inits;			/* Init strings */
+  dbug_cmds.cont =   "go\r";			/* continue command */
+  dbug_cmds.step =   "step\r";			/* single step */
+  dbug_cmds.stop =   NULL;				/* interrupt command */
+  dbug_cmds.set_break =   "br %x\r";			/* set a breakpoint */
+  dbug_cmds.clr_break =   "br -c %x\r";			/* clear a breakpoint */
+  dbug_cmds.clr_all_break =   "br -c\r";			/* clear all breakpoints */
+  dbug_cmds.fill =   "bf.b %x %x %x";		/* fill (start end val) */
+  dbug_cmds.setmem.cmdb =     "mm.b %x %x\r";		/* setmem.cmdb (addr, value) */
+  dbug_cmds.setmem.cmdw =     "mm.w %x %x\r";		/* setmem.cmdw (addr, value) */
+  dbug_cmds.setmem.cmdl =     "mm.l %x %x\r";		/* setmem.cmdl (addr, value) */
+  dbug_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  dbug_cmds.setmem.resp_delim =     NULL;			/* setmem.resp_delim */
+  dbug_cmds.setmem.term =     NULL;			/* setmem.term */
+  dbug_cmds.setmem.term_cmd =     NULL;			/* setmem.term_cmd */
+  dbug_cmds.getmem.cmdb =     "md.b %x %x\r";		/* getmem.cmdb (addr, addr2) */
+  dbug_cmds.getmem.cmdw =     "md.w %x %x\r";		/* getmem.cmdw (addr, addr2) */
+  dbug_cmds.getmem.cmdl =     "md.l %x %x\r";		/* getmem.cmdl (addr, addr2) */
+  dbug_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, addr2) */
+  dbug_cmds.getmem.resp_delim =     ":";			/* getmem.resp_delim */
+  dbug_cmds.getmem.term =     NULL;			/* getmem.term */
+  dbug_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+  dbug_cmds.setreg.cmd =     "rm %s %x\r";		/* setreg.cmd (name, value) */
+  dbug_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  dbug_cmds.setreg.term =     NULL;			/* setreg.term */
+  dbug_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  dbug_cmds.getreg.cmd =     "rd %s\r";			/* getreg.cmd (name) */
+  dbug_cmds.getreg.resp_delim =     ":";			/* getreg.resp_delim */
+  dbug_cmds.getreg.term =     NULL;			/* getreg.term */
+  dbug_cmds.getreg.term_cmd =     NULL;			/* getreg.term_cmd */
+  dbug_cmds.dump_registers =   "rd\r";			/* dump_registers */
+  dbug_cmds.register_pattern =   "\\(\\w+\\) +:\\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  dbug_cmds.supply_register =   dbug_supply_register;		/* supply_register */
+  dbug_cmds.load_routine =   NULL;				/* load_routine (defaults to SRECs) */
+  dbug_cmds.load =   "dl\r";			/* download command */
+  dbug_cmds.loadresp =   "\n";				/* load response */
+  dbug_cmds.prompt =   "dBUG>";			/* monitor command prompt */
+  dbug_cmds.line_term =   "\r";				/* end-of-line terminator */
+  dbug_cmds.cmd_end =   NULL;				/* optional command terminator */
+  dbug_cmds.target =   &dbug_ops ;			/* target operations */
+  dbug_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  dbug_cmds.regnames =   dbug_regnames;		/* registers names */
+  dbug_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_debug_ops */
+
+static void
+dbug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &dbug_cmds, from_tty);
+}
+
+void
+_initialize_dbug_rom ()
+{
+  init_dbug_cmds() ;
+  init_monitor_ops (&dbug_ops);
+
+  dbug_ops.to_shortname = "dbug";
+  dbug_ops.to_longname = "dBUG monitor";
+  dbug_ops.to_doc = "Debug via the dBUG monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  dbug_ops.to_open = dbug_open;
+
+  add_target (&dbug_ops);
+}
diff --git a/gdb/dbxread.c b/gdb/dbxread.c
new file mode 100644
index 0000000..0749412
--- /dev/null
+++ b/gdb/dbxread.c
@@ -0,0 +1,2738 @@
+/* Read dbx symbol tables and convert to internal format, for GDB.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module provides three functions: dbx_symfile_init,
+   which initializes to read a symbol file; dbx_new_init, which 
+   discards existing cached information when all symbols are being
+   discarded; and dbx_symfile_read, which reads a symbol table
+   from a file.
+
+   dbx_symfile_read only does the minimum work necessary for letting the
+   user "name" things symbolically; it does not read the entire symtab.
+   Instead, it reads the external and static symbols and puts them in partial
+   symbol tables.  When more extensive information is requested of a
+   file, the corresponding partial symbol table is mutated into a full
+   fledged symbol table by going back and reading the symbols
+   for real.  dbx_psymtab_to_symtab() is the function that does this */
+
+#include "defs.h"
+#include "gdb_string.h"
+
+#if defined(USG) || defined(__CYGNUSCLIB__)
+#include <sys/types.h>
+#include <fcntl.h>
+#endif
+
+#include "obstack.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "breakpoint.h"
+#include "command.h"
+#include "target.h"
+#include "gdbcore.h"		/* for bfd stuff */
+#include "libaout.h"	 	/* FIXME Secret internal BFD stuff for a.out */
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "gdb-stabs.h"
+#include "demangle.h"
+#include "language.h"		/* Needed inside partial-stab.h */
+#include "complaints.h"
+
+#include "aout/aout64.h"
+#include "aout/stab_gnu.h"	/* We always use GNU stabs, not native, now */
+
+
+/* This macro returns the size field of a minimal symbol, which is normally
+   stored in the "info" field.  The macro can be overridden for specific
+   targets (e.g. MIPS16) that use the info field for other purposes.  */
+#ifndef MSYMBOL_SIZE
+#define MSYMBOL_SIZE(msym) ((long) MSYMBOL_INFO (msym))
+#endif
+
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct symloc {
+
+  /* Offset within the file symbol table of first local symbol for this
+     file.  */
+
+  int ldsymoff;
+
+  /* Length (in bytes) of the section of the symbol table devoted to
+     this file's symbols (actually, the section bracketed may contain
+     more than just this file's symbols).  If ldsymlen is 0, the only
+     reason for this thing's existence is the dependency list.  Nothing
+     else will happen when it is read in.  */
+
+  int ldsymlen;
+
+  /* The size of each symbol in the symbol file (in external form).  */
+
+  int symbol_size;
+
+  /* Further information needed to locate the symbols if they are in
+     an ELF file.  */
+
+  int symbol_offset;
+  int string_offset;
+  int file_string_offset;
+};
+
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
+#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
+#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
+#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
+
+
+/* Remember what we deduced to be the source language of this psymtab. */
+
+static enum language psymtab_language = language_unknown;
+
+/* Nonzero means give verbose info on gdb action.  From main.c.  */
+
+extern int info_verbose;
+
+/* The BFD for this file -- implicit parameter to next_symbol_text.  */
+
+static bfd *symfile_bfd;
+
+/* The size of each symbol in the symbol file (in external form).
+   This is set by dbx_symfile_read when building psymtabs, and by
+   dbx_psymtab_to_symtab when building symtabs.  */
+
+static unsigned symbol_size;
+
+/* This is the offset of the symbol table in the executable file. */
+
+static unsigned symbol_table_offset;
+
+/* This is the offset of the string table in the executable file. */
+
+static unsigned string_table_offset;
+
+/* For elf+stab executables, the n_strx field is not a simple index
+   into the string table.  Instead, each .o file has a base offset in
+   the string table, and the associated symbols contain offsets from
+   this base.  The following two variables contain the base offset for
+   the current and next .o files. */
+
+static unsigned int file_string_table_offset;
+static unsigned int next_file_string_table_offset;
+
+/* .o and NLM files contain unrelocated addresses which are based at
+   0.  When non-zero, this flag disables some of the special cases for
+   Solaris elf+stab text addresses at location 0. */
+
+static int symfile_relocatable = 0;
+
+/* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are
+   relative to the function start address.  */
+
+static int block_address_function_relative = 0;
+
+/* The lowest text address we have yet encountered.  This is needed
+   because in an a.out file, there is no header field which tells us
+   what address the program is actually going to be loaded at, so we
+   need to make guesses based on the symbols (which *are* relocated to
+   reflect the address it will be loaded at).  */
+
+static CORE_ADDR lowest_text_address;
+
+/* Non-zero if there is any line number info in the objfile.  Prevents
+   end_psymtab from discarding an otherwise empty psymtab.  */
+
+static int has_line_numbers;
+
+/* Complaints about the symbols we have encountered.  */
+
+struct complaint lbrac_complaint = 
+  {"bad block start address patched", 0, 0};
+
+struct complaint string_table_offset_complaint =
+  {"bad string table offset in symbol %d", 0, 0};
+
+struct complaint unknown_symtype_complaint =
+  {"unknown symbol type %s", 0, 0};
+
+struct complaint unknown_symchar_complaint =
+  {"unknown symbol descriptor `%c'", 0, 0};
+
+struct complaint lbrac_rbrac_complaint =
+  {"block start larger than block end", 0, 0};
+
+struct complaint lbrac_unmatched_complaint =
+  {"unmatched N_LBRAC before symtab pos %d", 0, 0};
+
+struct complaint lbrac_mismatch_complaint =
+  {"N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d", 0, 0};
+
+struct complaint repeated_header_complaint =
+  {"\"repeated\" header file %s not previously seen, at symtab pos %d", 0, 0};
+
+struct complaint unclaimed_bincl_complaint =
+  {"N_BINCL %s not in entries for any file, at symtab pos %d", 0, 0};
+
+/* During initial symbol readin, we need to have a structure to keep
+   track of which psymtabs have which bincls in them.  This structure
+   is used during readin to setup the list of dependencies within each
+   partial symbol table. */
+
+struct header_file_location
+{
+  char *name;			/* Name of header file */
+  int instance;			/* See above */
+  struct partial_symtab *pst;	/* Partial symtab that has the
+				   BINCL/EINCL defs for this file */
+};
+
+/* The actual list and controling variables */
+static struct header_file_location *bincl_list, *next_bincl;
+static int bincls_allocated;
+
+/* Local function prototypes */
+
+static void 
+process_now PARAMS ((struct objfile *));
+
+static void
+free_header_files PARAMS ((void));
+
+static void
+init_header_files PARAMS ((void));
+
+static void
+read_ofile_symtab PARAMS ((struct partial_symtab *));
+
+static void
+dbx_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+static void
+dbx_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+
+static void
+read_dbx_dynamic_symtab PARAMS ((struct section_offsets *,
+				 struct objfile *objfile));
+
+static void
+read_dbx_symtab PARAMS ((struct section_offsets *, struct objfile *,
+			 CORE_ADDR, int));
+
+static void
+free_bincl_list PARAMS ((struct objfile *));
+
+static struct partial_symtab *
+find_corresponding_bincl_psymtab PARAMS ((char *, int));
+
+static void
+add_bincl_to_list PARAMS ((struct partial_symtab *, char *, int));
+
+static void
+init_bincl_list PARAMS ((int, struct objfile *));
+
+static char *
+dbx_next_symbol_text PARAMS ((struct objfile *));
+
+static void
+fill_symbuf PARAMS ((bfd *));
+
+static void
+dbx_symfile_init PARAMS ((struct objfile *));
+
+static void
+dbx_new_init PARAMS ((struct objfile *));
+
+static void
+dbx_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+dbx_symfile_finish PARAMS ((struct objfile *));
+
+static void
+record_minimal_symbol PARAMS ((char *, CORE_ADDR, int, struct objfile *));
+
+static void
+add_new_header_file PARAMS ((char *, int));
+
+static void
+add_old_header_file PARAMS ((char *, int));
+
+static void
+add_this_object_header_file PARAMS ((int));
+
+/* Free up old header file tables */
+
+static void
+free_header_files ()
+{
+  if (this_object_header_files)
+    {
+      free ((PTR)this_object_header_files);
+      this_object_header_files = NULL;
+    }
+  n_allocated_this_object_header_files = 0;
+}
+
+/* Allocate new header file tables */
+
+static void
+init_header_files ()
+{
+  n_allocated_this_object_header_files = 10;
+  this_object_header_files = (int *) xmalloc (10 * sizeof (int));
+}
+
+/* Add header file number I for this object file
+   at the next successive FILENUM.  */
+
+static void
+add_this_object_header_file (i)
+     int i;
+{
+  if (n_this_object_header_files == n_allocated_this_object_header_files)
+    {
+      n_allocated_this_object_header_files *= 2;
+      this_object_header_files
+	= (int *) xrealloc ((char *) this_object_header_files,
+			    n_allocated_this_object_header_files * sizeof (int));
+    }
+
+  this_object_header_files[n_this_object_header_files++] = i;
+}
+
+/* Add to this file an "old" header file, one already seen in
+   a previous object file.  NAME is the header file's name.
+   INSTANCE is its instance code, to select among multiple
+   symbol tables for the same header file.  */
+
+static void
+add_old_header_file (name, instance)
+     char *name;
+     int instance;
+{
+  register struct header_file *p = HEADER_FILES (current_objfile);
+  register int i;
+
+  for (i = 0; i < N_HEADER_FILES (current_objfile); i++)
+    if (STREQ (p[i].name, name) && instance == p[i].instance)
+      {
+	add_this_object_header_file (i);
+	return;
+      }
+  complain (&repeated_header_complaint, name, symnum);
+}
+
+/* Add to this file a "new" header file: definitions for its types follow.
+   NAME is the header file's name.
+   Most often this happens only once for each distinct header file,
+   but not necessarily.  If it happens more than once, INSTANCE has
+   a different value each time, and references to the header file
+   use INSTANCE values to select among them.
+
+   dbx output contains "begin" and "end" markers for each new header file,
+   but at this level we just need to know which files there have been;
+   so we record the file when its "begin" is seen and ignore the "end".  */
+
+static void
+add_new_header_file (name, instance)
+     char *name;
+     int instance;
+{
+  register int i;
+  register struct header_file *hfile;
+
+  /* Make sure there is room for one more header file.  */
+
+  i = N_ALLOCATED_HEADER_FILES (current_objfile);
+
+  if (N_HEADER_FILES (current_objfile) == i)
+    {
+      if (i == 0)
+	{
+	  N_ALLOCATED_HEADER_FILES (current_objfile) = 10;
+	  HEADER_FILES (current_objfile) = (struct header_file *)
+	    xmalloc (10 * sizeof (struct header_file));
+	}
+      else
+	{
+	  i *= 2;
+	  N_ALLOCATED_HEADER_FILES (current_objfile) = i;
+	  HEADER_FILES (current_objfile) = (struct header_file *)
+	    xrealloc ((char *) HEADER_FILES (current_objfile),
+		      (i * sizeof (struct header_file)));
+	}
+    }
+
+  /* Create an entry for this header file.  */
+
+  i = N_HEADER_FILES (current_objfile)++;
+  hfile = HEADER_FILES (current_objfile) + i;
+  hfile->name = savestring (name, strlen(name));
+  hfile->instance = instance;
+  hfile->length = 10;
+  hfile->vector
+    = (struct type **) xmalloc (10 * sizeof (struct type *));
+  memset (hfile->vector, 0, 10 * sizeof (struct type *));
+
+  add_this_object_header_file (i);
+}
+
+#if 0
+static struct type **
+explicit_lookup_type (real_filenum, index)
+     int real_filenum, index;
+{
+  register struct header_file *f = &HEADER_FILES (current_objfile)[real_filenum];
+
+  if (index >= f->length)
+    {
+      f->length *= 2;
+      f->vector = (struct type **)
+	xrealloc (f->vector, f->length * sizeof (struct type *));
+      memset (&f->vector[f->length / 2],
+	     '\0', f->length * sizeof (struct type *) / 2);
+    }
+  return &f->vector[index];
+}
+#endif
+
+static void
+record_minimal_symbol (name, address, type, objfile)
+     char *name;
+     CORE_ADDR address;
+     int type;
+     struct objfile *objfile;
+{
+  enum minimal_symbol_type ms_type;
+  int section;
+  asection *bfd_section;
+
+  switch (type)
+    {
+    case N_TEXT | N_EXT:
+      ms_type = mst_text;
+      section = SECT_OFF_TEXT;
+      bfd_section = DBX_TEXT_SECTION (objfile);
+      break;
+    case N_DATA | N_EXT:
+      ms_type = mst_data;
+      section = SECT_OFF_DATA;
+      bfd_section = DBX_DATA_SECTION (objfile);
+      break;
+    case N_BSS | N_EXT:
+      ms_type = mst_bss;
+      section = SECT_OFF_BSS;
+      bfd_section = DBX_BSS_SECTION (objfile);
+      break;
+    case N_ABS | N_EXT:
+      ms_type = mst_abs;
+      section = -1;
+      bfd_section = NULL;
+      break;
+#ifdef N_SETV
+    case N_SETV | N_EXT:
+      ms_type = mst_data;
+      section = SECT_OFF_DATA;
+      bfd_section = DBX_DATA_SECTION (objfile);
+      break;
+    case N_SETV:
+      /* I don't think this type actually exists; since a N_SETV is the result
+	 of going over many .o files, it doesn't make sense to have one
+	 file local.  */
+      ms_type = mst_file_data;
+      section = SECT_OFF_DATA;
+      bfd_section = DBX_DATA_SECTION (objfile);
+      break;
+#endif
+    case N_TEXT:
+    case N_NBTEXT:
+    case N_FN:
+    case N_FN_SEQ:
+      ms_type = mst_file_text;
+      section = SECT_OFF_TEXT;
+      bfd_section = DBX_TEXT_SECTION (objfile);
+      break;
+    case N_DATA:
+      ms_type = mst_file_data;
+
+      /* Check for __DYNAMIC, which is used by Sun shared libraries. 
+	 Record it as global even if it's local, not global, so
+	 lookup_minimal_symbol can find it.  We don't check symbol_leading_char
+	 because for SunOS4 it always is '_'.  */
+      if (name[8] == 'C' && STREQ ("__DYNAMIC", name))
+	ms_type = mst_data;
+
+      /* Same with virtual function tables, both global and static.  */
+      {
+	char *tempstring = name;
+	if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
+	  ++tempstring;
+	if (VTBL_PREFIX_P ((tempstring)))
+	  ms_type = mst_data;
+      }
+      section = SECT_OFF_DATA;
+      bfd_section = DBX_DATA_SECTION (objfile);
+      break;
+    case N_BSS:
+      ms_type = mst_file_bss;
+      section = SECT_OFF_BSS;
+      bfd_section = DBX_BSS_SECTION (objfile);
+      break;
+    default:
+      ms_type = mst_unknown;
+      section = -1;
+      bfd_section = NULL;
+      break;
+  }
+
+  if ((ms_type == mst_file_text || ms_type == mst_text)
+      && address < lowest_text_address)
+    lowest_text_address = address;
+
+  prim_record_minimal_symbol_and_info
+    (name, address, ms_type, NULL, section, bfd_section, objfile);
+}
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to dbx_symfile_init, which 
+   put all the relevant info into a "struct dbx_symfile_info",
+   hung off the objfile structure.
+
+   SECTION_OFFSETS contains offsets relative to which the symbols in the
+   various sections are (depending where the sections were actually loaded).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).  */
+
+static void
+dbx_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;	/* FIXME comments above */
+{
+  bfd *sym_bfd;
+  int val;
+  struct cleanup *back_to;
+
+  val = strlen (objfile->name);
+
+  sym_bfd = objfile->obfd;
+
+  /* .o and .nlm files are relocatables with text, data and bss segs based at
+     0.  This flag disables special (Solaris stabs-in-elf only) fixups for
+     symbols with a value of 0.  */
+
+  symfile_relocatable = bfd_get_file_flags (sym_bfd) & HAS_RELOC;
+
+  /* This is true for Solaris (and all other systems which put stabs
+     in sections, hopefully, since it would be silly to do things
+     differently from Solaris), and false for SunOS4 and other a.out
+     file formats.  */
+  block_address_function_relative =
+    ((0 == strncmp (bfd_get_target (sym_bfd), "elf", 3))
+     || (0 == strncmp (bfd_get_target (sym_bfd), "som", 3))
+     || (0 == strncmp (bfd_get_target (sym_bfd), "coff", 4))
+     || (0 == strncmp (bfd_get_target (sym_bfd), "pe", 2))
+     || (0 == strncmp (bfd_get_target (sym_bfd), "nlm", 3)));
+
+  val = bfd_seek (sym_bfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
+  if (val < 0)
+    perror_with_name (objfile->name);
+
+  /* If we are reinitializing, or if we have never loaded syms yet, init */
+  if (mainline
+      || objfile->global_psymbols.size == 0
+      || objfile->static_psymbols.size == 0)
+    init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
+
+  symbol_size = DBX_SYMBOL_SIZE (objfile);
+  symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
+
+  free_pending_blocks ();
+  back_to = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+  init_minimal_symbol_collection ();
+  make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* Now that the symbol table data of the executable file are all in core,
+     process them and define symbols accordingly.  */
+
+  read_dbx_symtab (section_offsets, objfile,
+		   DBX_TEXT_ADDR (objfile),
+		   DBX_TEXT_SIZE (objfile));
+
+  /* Add the dynamic symbols.  */
+
+  read_dbx_dynamic_symtab (section_offsets, objfile);
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+
+  do_cleanups (back_to);
+}
+
+/* Initialize anything that needs initializing when a completely new
+   symbol file is specified (not just adding some symbols from another
+   file, e.g. a shared library).  */
+
+static void
+dbx_new_init (ignore)
+     struct objfile *ignore;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+  init_header_files ();
+}
+
+
+/* dbx_symfile_init ()
+   is the dbx-specific initialization routine for reading symbols.
+   It is passed a struct objfile which contains, among other things,
+   the BFD for the file whose symbols are being read, and a slot for a pointer
+   to "private data" which we fill with goodies.
+
+   We read the string table into malloc'd space and stash a pointer to it.
+
+   Since BFD doesn't know how to read debug symbols in a format-independent
+   way (and may never do so...), we have to do it ourselves.  We will never
+   be called unless this is an a.out (or very similar) file. 
+   FIXME, there should be a cleaner peephole into the BFD environment here.  */
+
+#define DBX_STRINGTAB_SIZE_SIZE sizeof(long)   /* FIXME */
+
+static void
+dbx_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  int val;
+  bfd *sym_bfd = objfile->obfd;
+  char *name = bfd_get_filename (sym_bfd);
+  asection *text_sect;
+  unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_stab_info = (struct dbx_symfile_info *)
+    xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
+  memset ((PTR) objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+
+  DBX_TEXT_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
+  DBX_DATA_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".data");
+  DBX_BSS_SECTION (objfile) = bfd_get_section_by_name (sym_bfd, ".bss");
+
+  /* FIXME POKING INSIDE BFD DATA STRUCTURES */
+#define	STRING_TABLE_OFFSET	(sym_bfd->origin + obj_str_filepos (sym_bfd))
+#define	SYMBOL_TABLE_OFFSET	(sym_bfd->origin + obj_sym_filepos (sym_bfd))
+
+  /* FIXME POKING INSIDE BFD DATA STRUCTURES */
+
+  DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
+  
+  text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+  if (!text_sect)
+    error ("Can't find .text section in symbol file");
+  DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+  DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
+
+  DBX_SYMBOL_SIZE (objfile) = obj_symbol_entry_size (sym_bfd);
+  DBX_SYMCOUNT (objfile) = bfd_get_symcount (sym_bfd);
+  DBX_SYMTAB_OFFSET (objfile) = SYMBOL_TABLE_OFFSET;
+
+  /* Read the string table and stash it away in the psymbol_obstack.  It is
+     only needed as long as we need to expand psymbols into full symbols,
+     so when we blow away the psymbol the string table goes away as well.
+     Note that gdb used to use the results of attempting to malloc the
+     string table, based on the size it read, as a form of sanity check
+     for botched byte swapping, on the theory that a byte swapped string
+     table size would be so totally bogus that the malloc would fail.  Now
+     that we put in on the psymbol_obstack, we can't do this since gdb gets
+     a fatal error (out of virtual memory) if the size is bogus.  We can
+     however at least check to see if the size is less than the size of
+     the size field itself, or larger than the size of the entire file.
+     Note that all valid string tables have a size greater than zero, since
+     the bytes used to hold the size are included in the count. */
+
+  if (STRING_TABLE_OFFSET == 0)
+    {
+      /* It appears that with the existing bfd code, STRING_TABLE_OFFSET
+	 will never be zero, even when there is no string table.  This
+	 would appear to be a bug in bfd. */
+      DBX_STRINGTAB_SIZE (objfile) = 0;
+      DBX_STRINGTAB (objfile) = NULL;
+    }
+  else
+    {
+      val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
+      if (val < 0)
+	perror_with_name (name);
+      
+      memset ((PTR) size_temp, 0, sizeof (size_temp));
+      val = bfd_read ((PTR) size_temp, sizeof (size_temp), 1, sym_bfd);
+      if (val < 0)
+	{
+	  perror_with_name (name);
+	}
+      else if (val == 0)
+	{
+	  /* With the existing bfd code, STRING_TABLE_OFFSET will be set to
+	     EOF if there is no string table, and attempting to read the size
+	     from EOF will read zero bytes. */
+	  DBX_STRINGTAB_SIZE (objfile) = 0;
+	  DBX_STRINGTAB (objfile) = NULL;
+	}
+      else
+	{
+	  /* Read some data that would appear to be the string table size.
+	     If there really is a string table, then it is probably the right
+	     size.  Byteswap if necessary and validate the size.  Note that
+	     the minimum is DBX_STRINGTAB_SIZE_SIZE.  If we just read some
+	     random data that happened to be at STRING_TABLE_OFFSET, because
+	     bfd can't tell us there is no string table, the sanity checks may
+	     or may not catch this. */
+	  DBX_STRINGTAB_SIZE (objfile) = bfd_h_get_32 (sym_bfd, size_temp);
+	  
+	  if (DBX_STRINGTAB_SIZE (objfile) < sizeof (size_temp)
+	      || DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
+	    error ("ridiculous string table size (%d bytes).",
+		   DBX_STRINGTAB_SIZE (objfile));
+	  
+	  DBX_STRINGTAB (objfile) =
+	    (char *) obstack_alloc (&objfile -> psymbol_obstack,
+				    DBX_STRINGTAB_SIZE (objfile));
+	  OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile));
+	  
+	  /* Now read in the string table in one big gulp.  */
+	  
+	  val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
+	  if (val < 0)
+	    perror_with_name (name);
+	  val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
+			  sym_bfd);
+	  if (val != DBX_STRINGTAB_SIZE (objfile))
+	    perror_with_name (name);
+	}
+    }
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+dbx_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile->sym_stab_info != NULL)
+    {
+      if (HEADER_FILES (objfile) != NULL)
+	{
+	  register int i = N_HEADER_FILES (objfile);
+	  register struct header_file *hfiles = HEADER_FILES (objfile);
+
+	  while (--i >= 0)
+	    {
+	      free (hfiles [i].name);
+	      free (hfiles [i].vector);
+	    }
+	  free ((PTR) hfiles);
+	}
+      mfree (objfile -> md, objfile->sym_stab_info);
+    }
+  free_header_files ();
+}
+
+
+/* Buffer for reading the symbol table entries.  */
+static struct external_nlist symbuf[4096];
+static int symbuf_idx;
+static int symbuf_end;
+
+/* cont_elem is used for continuing information in cfront.
+   It saves information about which types need to be fixed up and 
+   completed after all the stabs are read.  */
+struct cont_elem 
+  {
+    /* sym and stabsstring for continuing information in cfront */
+    struct symbol * sym;
+    char * stabs;
+    /* state dependancies (statics that must be preserved) */
+    int sym_idx;
+    int sym_end;
+    int symnum;
+    int (*func) PARAMS ((struct objfile *, struct symbol *, char *));
+    /* other state dependancies include:
+       (assumption is that these will not change since process_now FIXME!!)
+        stringtab_global
+        n_stabs
+        objfile
+        symfile_bfd */
+};
+
+static struct cont_elem *cont_list = 0;
+static int cont_limit = 0;
+static int cont_count = 0;
+
+/* Arrange for function F to be called with arguments SYM and P later
+   in the stabs reading process.  */
+void 
+process_later (sym, p, f)
+  struct symbol *sym;
+  char *p;
+  int (*f) PARAMS ((struct objfile *, struct symbol *, char *));
+{
+
+  /* Allocate more space for the deferred list.  */
+  if (cont_count >= cont_limit - 1)
+    {
+      cont_limit += 32;	/* chunk size */
+
+      cont_list
+	= (struct cont_elem *) xrealloc (cont_list, 
+					  (cont_limit
+					   * sizeof (struct cont_elem)));
+      if (!cont_list)
+        error ("Virtual memory exhausted\n");
+    }
+
+  /* Save state variables so we can process these stabs later.  */
+  cont_list[cont_count].sym_idx = symbuf_idx;
+  cont_list[cont_count].sym_end = symbuf_end;
+  cont_list[cont_count].symnum = symnum;
+  cont_list[cont_count].sym = sym;
+  cont_list[cont_count].stabs = p;
+  cont_list[cont_count].func = f;
+  cont_count++;
+}
+
+/* Call deferred funtions in CONT_LIST.  */
+
+static void 
+process_now (objfile) 
+  struct objfile *objfile;
+{
+  int i;
+  int save_symbuf_idx;
+  int save_symbuf_end;
+  int save_symnum;
+  struct symbol *sym;
+  char *stabs;
+  int err;
+  int (*func) PARAMS ((struct objfile *, struct symbol *, char *));
+
+  /* Save the state of our caller, we'll want to restore it before
+     returning.  */
+  save_symbuf_idx = symbuf_idx;
+  save_symbuf_end = symbuf_end;
+  save_symnum = symnum;
+
+  /* Iterate over all the deferred stabs.  */
+  for (i = 0; i < cont_count; i++)
+    {
+      /* Restore the state for this deferred stab.  */
+      symbuf_idx = cont_list[i].sym_idx;
+      symbuf_end = cont_list[i].sym_end;  
+      symnum = cont_list[i].symnum;  
+      sym = cont_list[i].sym;
+      stabs = cont_list[i].stabs;
+      func = cont_list[i].func;
+
+      /* Call the function to handle this deferrd stab.  */
+      err = (*func) (objfile, sym, stabs);
+      if (err)
+	error ("Internal error: unable to resolve stab.\n");
+    }
+
+  /* Restore our caller's state.  */
+  symbuf_idx = save_symbuf_idx;
+  symbuf_end = save_symbuf_end;
+  symnum = save_symnum;
+  cont_count = 0;
+}
+
+
+/* Name of last function encountered.  Used in Solaris to approximate
+   object file boundaries.  */
+static char *last_function_name;
+
+/* The address in memory of the string table of the object file we are
+   reading (which might not be the "main" object file, but might be a
+   shared library or some other dynamically loaded thing).  This is
+   set by read_dbx_symtab when building psymtabs, and by
+   read_ofile_symtab when building symtabs, and is used only by
+   next_symbol_text.  FIXME: If that is true, we don't need it when
+   building psymtabs, right?  */
+static char *stringtab_global;
+
+/* These variables are used to control fill_symbuf when the stabs
+   symbols are not contiguous (as may be the case when a COFF file is
+   linked using --split-by-reloc).  */
+static struct stab_section_list *symbuf_sections;
+static unsigned int symbuf_left;
+static unsigned int symbuf_read;
+
+/* Refill the symbol table input buffer
+   and set the variables that control fetching entries from it.
+   Reports an error if no data available.
+   This function can read past the end of the symbol table
+   (into the string table) but this does no harm.  */
+
+static void
+fill_symbuf (sym_bfd)
+     bfd *sym_bfd;
+{
+  unsigned int count;
+  int nbytes;
+
+  if (symbuf_sections == NULL)
+    count = sizeof (symbuf);
+  else
+    {
+      if (symbuf_left <= 0)
+	{
+	  file_ptr filepos = symbuf_sections->section->filepos;
+	  if (bfd_seek (sym_bfd, filepos, SEEK_SET) != 0)
+	    perror_with_name (bfd_get_filename (sym_bfd));
+	  symbuf_left = bfd_section_size (sym_bfd, symbuf_sections->section);
+	  symbol_table_offset = filepos - symbuf_read;
+	  symbuf_sections = symbuf_sections->next;
+	}
+
+      count = symbuf_left;
+      if (count > sizeof (symbuf))
+	count = sizeof (symbuf);
+    }
+
+  nbytes = bfd_read ((PTR)symbuf, count, 1, sym_bfd);
+  if (nbytes < 0)
+    perror_with_name (bfd_get_filename (sym_bfd));
+  else if (nbytes == 0)
+    error ("Premature end of file reading symbol table");
+  symbuf_end = nbytes / symbol_size;
+  symbuf_idx = 0;
+  symbuf_left -= nbytes;
+  symbuf_read += nbytes;
+}
+
+#define SWAP_SYMBOL(symp, abfd) \
+  { \
+    (symp)->n_strx = bfd_h_get_32(abfd,			\
+				(unsigned char *)&(symp)->n_strx);	\
+    (symp)->n_desc = bfd_h_get_16 (abfd,			\
+				(unsigned char *)&(symp)->n_desc);  	\
+    (symp)->n_value = bfd_h_get_32 (abfd,			\
+				(unsigned char *)&(symp)->n_value); 	\
+  }
+
+#define INTERNALIZE_SYMBOL(intern, extern, abfd)			\
+  {									\
+    (intern).n_type = bfd_h_get_8 (abfd, (extern)->e_type);		\
+    (intern).n_strx = bfd_h_get_32 (abfd, (extern)->e_strx);		\
+    (intern).n_desc = bfd_h_get_16 (abfd, (extern)->e_desc);  		\
+    (intern).n_value = bfd_h_get_32 (abfd, (extern)->e_value);		\
+  }
+
+/* Invariant: The symbol pointed to by symbuf_idx is the first one
+   that hasn't been swapped.  Swap the symbol at the same time
+   that symbuf_idx is incremented.  */
+
+/* dbx allows the text of a symbol name to be continued into the
+   next symbol name!  When such a continuation is encountered
+   (a \ at the end of the text of a name)
+   call this function to get the continuation.  */
+
+static char *
+dbx_next_symbol_text (objfile)
+     struct objfile *objfile;
+{
+  struct internal_nlist nlist;
+
+  if (symbuf_idx == symbuf_end)
+    fill_symbuf (symfile_bfd);
+
+  symnum++;
+  INTERNALIZE_SYMBOL(nlist, &symbuf[symbuf_idx], symfile_bfd);
+  OBJSTAT (objfile, n_stabs++);
+
+  symbuf_idx++;
+
+  return nlist.n_strx + stringtab_global + file_string_table_offset;
+}
+
+/* Initialize the list of bincls to contain none and have some
+   allocated.  */
+
+static void
+init_bincl_list (number, objfile)
+     int number;
+     struct objfile *objfile;
+{
+  bincls_allocated = number;
+  next_bincl = bincl_list = (struct header_file_location *)
+    xmmalloc (objfile -> md, bincls_allocated * sizeof(struct header_file_location));
+}
+
+/* Add a bincl to the list.  */
+
+static void
+add_bincl_to_list (pst, name, instance)
+     struct partial_symtab *pst;
+     char *name;
+     int instance;
+{
+  if (next_bincl >= bincl_list + bincls_allocated)
+    {
+      int offset = next_bincl - bincl_list;
+      bincls_allocated *= 2;
+      bincl_list = (struct header_file_location *)
+	xmrealloc (pst->objfile->md, (char *)bincl_list,
+		  bincls_allocated * sizeof (struct header_file_location));
+      next_bincl = bincl_list + offset;
+    }
+  next_bincl->pst = pst;
+  next_bincl->instance = instance;
+  next_bincl++->name = name;
+}
+
+/* Given a name, value pair, find the corresponding
+   bincl in the list.  Return the partial symtab associated
+   with that header_file_location.  */
+
+static struct partial_symtab *
+find_corresponding_bincl_psymtab (name, instance)
+     char *name;
+     int instance;
+{
+  struct header_file_location *bincl;
+
+  for (bincl = bincl_list; bincl < next_bincl; bincl++)
+    if (bincl->instance == instance
+	&& STREQ (name, bincl->name))
+      return bincl->pst;
+
+  complain (&repeated_header_complaint, name, symnum);
+  return (struct partial_symtab *) 0;
+}
+
+/* Free the storage allocated for the bincl list.  */
+
+static void
+free_bincl_list (objfile)
+     struct objfile *objfile;
+{
+  mfree (objfile -> md, (PTR)bincl_list);
+  bincls_allocated = 0;
+}
+
+/* Scan a SunOs dynamic symbol table for symbols of interest and
+   add them to the minimal symbol table.  */
+
+static void
+read_dbx_dynamic_symtab (section_offsets, objfile)
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  bfd *abfd = objfile->obfd;
+  struct cleanup *back_to;
+  int counter;
+  long dynsym_size;
+  long dynsym_count;
+  asymbol **dynsyms;
+  asymbol **symptr;
+  arelent **relptr;
+  long dynrel_size;
+  long dynrel_count;
+  arelent **dynrels;
+  CORE_ADDR sym_value;
+  char *name;
+
+  /* Check that the symbol file has dynamic symbols that we know about.
+     bfd_arch_unknown can happen if we are reading a sun3 symbol file
+     on a sun4 host (and vice versa) and bfd is not configured
+     --with-target=all.  This would trigger an assertion in bfd/sunos.c,
+     so we ignore the dynamic symbols in this case.  */
+  if (bfd_get_flavour (abfd) != bfd_target_aout_flavour
+      || (bfd_get_file_flags (abfd) & DYNAMIC) == 0
+      || bfd_get_arch (abfd) == bfd_arch_unknown)
+    return;
+
+  dynsym_size = bfd_get_dynamic_symtab_upper_bound (abfd);
+  if (dynsym_size < 0)
+    return;
+
+  dynsyms = (asymbol **) xmalloc (dynsym_size);
+  back_to = make_cleanup (free, dynsyms);
+
+  dynsym_count = bfd_canonicalize_dynamic_symtab (abfd, dynsyms);
+  if (dynsym_count < 0)
+    {
+      do_cleanups (back_to);
+      return;
+    }
+
+  /* Enter dynamic symbols into the minimal symbol table
+     if this is a stripped executable.  */
+  if (bfd_get_symcount (abfd) <= 0)
+    {
+      symptr = dynsyms;
+      for (counter = 0; counter < dynsym_count; counter++, symptr++)
+	{
+	  asymbol *sym = *symptr;
+	  asection *sec;
+	  int type;
+
+	  sec = bfd_get_section (sym);
+
+	  /* BFD symbols are section relative.  */
+	  sym_value = sym->value + sec->vma;
+
+	  if (bfd_get_section_flags (abfd, sec) & SEC_CODE)
+	    {
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      type = N_TEXT;
+	    }
+	  else if (bfd_get_section_flags (abfd, sec) & SEC_DATA)
+	    {
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	      type = N_DATA;
+	    }
+	  else if (bfd_get_section_flags (abfd, sec) & SEC_ALLOC)
+	    {
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+	      type = N_BSS;
+	    }
+	  else
+	    continue;
+
+	  if (sym->flags & BSF_GLOBAL)
+	    type |= N_EXT;
+
+	  record_minimal_symbol ((char *) bfd_asymbol_name (sym), sym_value,
+				 type, objfile);
+	}
+    }
+
+  /* Symbols from shared libraries have a dynamic relocation entry
+     that points to the associated slot in the procedure linkage table.
+     We make a mininal symbol table entry with type mst_solib_trampoline
+     at the address in the procedure linkage table.  */
+  dynrel_size = bfd_get_dynamic_reloc_upper_bound (abfd);
+  if (dynrel_size < 0)
+    {
+      do_cleanups (back_to);
+      return;
+    }
+  
+  dynrels = (arelent **) xmalloc (dynrel_size);
+  make_cleanup (free, dynrels);
+
+  dynrel_count = bfd_canonicalize_dynamic_reloc (abfd, dynrels, dynsyms);
+  if (dynrel_count < 0)
+    {
+      do_cleanups (back_to);
+      return;
+    }
+
+  for (counter = 0, relptr = dynrels;
+       counter < dynrel_count;
+       counter++, relptr++)
+    {
+      arelent *rel = *relptr;
+      CORE_ADDR address =
+	rel->address + ANOFFSET (section_offsets, SECT_OFF_DATA);
+
+      switch (bfd_get_arch (abfd))
+	{
+	case bfd_arch_sparc:
+	  if (rel->howto->type != RELOC_JMP_SLOT)
+	    continue;
+	  break;
+	case bfd_arch_m68k:
+	  /* `16' is the type BFD produces for a jump table relocation.  */
+	  if (rel->howto->type != 16)
+	    continue;
+
+	  /* Adjust address in the jump table to point to
+	     the start of the bsr instruction.  */
+	  address -= 2;
+	  break;
+	default:
+	  continue;
+	}
+
+      name = (char *) bfd_asymbol_name (*rel->sym_ptr_ptr);
+      prim_record_minimal_symbol (name, address, mst_solib_trampoline,
+				  objfile);
+    }
+
+  do_cleanups (back_to);
+}
+
+/* Given pointers to an a.out symbol table in core containing dbx
+   style data, setup partial_symtab's describing each source file for
+   which debugging information is available.
+   SYMFILE_NAME is the name of the file we are reading from
+   and SECTION_OFFSETS is the set of offsets for the various sections
+   of the file (a set of zeros if the mainline program).  */
+
+static void
+read_dbx_symtab (section_offsets, objfile, text_addr, text_size)
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+     CORE_ADDR text_addr;
+     int text_size;
+{
+  register struct external_nlist *bufp = 0;	/* =0 avoids gcc -Wall glitch */
+  struct internal_nlist nlist;
+
+  register char *namestring;
+  int nsl;
+  int past_first_source_file = 0;
+  CORE_ADDR last_o_file_start = 0;
+  CORE_ADDR last_function_start = 0;
+  struct cleanup *back_to;
+  bfd *abfd;
+  int textlow_not_set;
+
+  /* Current partial symtab */
+  struct partial_symtab *pst;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+
+  /* FIXME.  We probably want to change stringtab_global rather than add this
+     while processing every symbol entry.  FIXME.  */
+  file_string_table_offset = 0;
+  next_file_string_table_offset = 0;
+
+  stringtab_global = DBX_STRINGTAB (objfile);
+  
+  pst = (struct partial_symtab *) 0;
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  /* Init bincl list */
+  init_bincl_list (20, objfile);
+  back_to = make_cleanup ((make_cleanup_func) free_bincl_list, objfile);
+
+  last_source_file = NULL;
+
+  lowest_text_address = (CORE_ADDR)-1;
+
+  symfile_bfd = objfile->obfd;	/* For next_text_symbol */
+  abfd = objfile->obfd;
+  symbuf_end = symbuf_idx = 0;
+  next_symbol_text_func = dbx_next_symbol_text;
+  textlow_not_set = 1;
+  has_line_numbers = 0;
+
+  for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
+    {
+      /* Get the symbol for this run and pull out some info */
+      QUIT;	/* allow this to be interruptable */
+      if (symbuf_idx == symbuf_end)
+	fill_symbuf (abfd);
+      bufp = &symbuf[symbuf_idx++];
+
+      /*
+       * Special case to speed up readin.
+       */
+      if (bfd_h_get_8 (abfd, bufp->e_type) == N_SLINE)
+	{
+	  has_line_numbers = 1;
+	  continue;
+	}
+
+      INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+      OBJSTAT (objfile, n_stabs++);
+
+      /* Ok.  There is a lot of code duplicated in the rest of this
+         switch statement (for efficiency reasons).  Since I don't
+         like duplicating code, I will do my penance here, and
+         describe the code which is duplicated:
+
+	 *) The assignment to namestring.
+	 *) The call to strchr.
+	 *) The addition of a partial symbol the the two partial
+	    symbol lists.  This last is a large section of code, so
+	    I've imbedded it in the following macro.
+	 */
+      
+/* Set namestring based on nlist.  If the string table index is invalid, 
+   give a fake name, and print a single error message per symbol file read,
+   rather than abort the symbol reading or flood the user with messages.  */
+
+/*FIXME: Too many adds and indirections in here for the inner loop.  */
+#define SET_NAMESTRING()\
+  if (((unsigned)CUR_SYMBOL_STRX + file_string_table_offset) >=		\
+      DBX_STRINGTAB_SIZE (objfile)) {					\
+    complain (&string_table_offset_complaint, symnum);			\
+    namestring = "<bad string table offset>";				\
+  } else								\
+    namestring = CUR_SYMBOL_STRX + file_string_table_offset +		\
+		 DBX_STRINGTAB (objfile)
+
+#define CUR_SYMBOL_TYPE nlist.n_type
+#define CUR_SYMBOL_VALUE nlist.n_value
+#define CUR_SYMBOL_STRX nlist.n_strx
+#define DBXREAD_ONLY
+#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
+  start_psymtab(ofile, secoff, fname, low, symoff, global_syms, static_syms)
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)\
+  end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)
+
+#include "partial-stab.h"
+    }
+
+  /* If there's stuff to be cleaned up, clean it up.  */
+  if (DBX_SYMCOUNT (objfile) > 0			/* We have some syms */
+/*FIXME, does this have a bug at start address 0? */
+      && last_o_file_start
+      && objfile -> ei.entry_point < nlist.n_value
+      && objfile -> ei.entry_point >= last_o_file_start)
+    {
+      objfile -> ei.entry_file_lowpc = last_o_file_start;
+      objfile -> ei.entry_file_highpc = nlist.n_value;
+    }
+
+  if (pst)
+    {
+      /* Don't set pst->texthigh lower than it already is.  */
+      CORE_ADDR text_end =
+	(lowest_text_address == (CORE_ADDR)-1
+	 ? (text_addr + section_offsets->offsets[SECT_OFF_TEXT])
+	 : lowest_text_address)
+	+ text_size;
+
+      end_psymtab (pst, psymtab_include_list, includes_used,
+		   symnum * symbol_size,
+		   text_end > pst->texthigh ? text_end : pst->texthigh,
+		   dependency_list, dependencies_used, textlow_not_set);
+    }
+
+  do_cleanups (back_to);
+}
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+
+struct partial_symtab *
+start_psymtab (objfile, section_offsets,
+	       filename, textlow, ldsymoff, global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     CORE_ADDR textlow;
+     int ldsymoff;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  struct partial_symtab *result =
+      start_psymtab_common(objfile, section_offsets,
+			   filename, textlow, global_syms, static_syms);
+
+  result->read_symtab_private = (char *)
+    obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc));
+  LDSYMOFF(result) = ldsymoff;
+  result->read_symtab = dbx_psymtab_to_symtab;
+  SYMBOL_SIZE(result) = symbol_size;
+  SYMBOL_OFFSET(result) = symbol_table_offset;
+  STRING_OFFSET(result) = string_table_offset;
+  FILE_STRING_OFFSET(result) = file_string_table_offset;
+
+  /* If we're handling an ELF file, drag some section-relocation info
+     for this source file out of the ELF symbol table, to compensate for
+     Sun brain death.  This replaces the section_offsets in this psymtab,
+     if successful.  */
+  elfstab_offset_sections (objfile, result);
+
+  /* Deduce the source language from the filename for this psymtab. */
+  psymtab_language = deduce_language_from_filename (filename);
+
+  return result;
+}
+
+/* Close off the current usage of PST.  
+   Returns PST or NULL if the partial symtab was empty and thrown away.
+
+   FIXME:  List variables and peculiarities of same.  */
+
+struct partial_symtab *
+end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
+	     capping_text, dependency_list, number_dependencies, textlow_not_set)
+     struct partial_symtab *pst;
+     char **include_list;
+     int num_includes;
+     int capping_symbol_offset;
+     CORE_ADDR capping_text;
+     struct partial_symtab **dependency_list;
+     int number_dependencies;
+     int textlow_not_set;
+{
+  int i;
+  struct objfile *objfile = pst -> objfile;
+
+  if (capping_symbol_offset != -1)
+    LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
+  pst->texthigh = capping_text;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  /* Under Solaris, the N_SO symbols always have a value of 0,
+     instead of the usual address of the .o file.  Therefore,
+     we have to do some tricks to fill in texthigh and textlow.
+     The first trick is in partial-stab.h: if we see a static
+     or global function, and the textlow for the current pst
+     is not set (ie: textlow_not_set), then we use that function's
+     address for the textlow of the pst.  */
+
+  /* Now, to fill in texthigh, we remember the last function seen
+     in the .o file (also in partial-stab.h).  Also, there's a hack in
+     bfd/elf.c and gdb/elfread.c to pass the ELF st_size field
+     to here via the misc_info field.  Therefore, we can fill in
+     a reliable texthigh by taking the address plus size of the
+     last function in the file.  */
+
+  if (pst->texthigh == 0 && last_function_name)
+    {
+      char *p;
+      int n;
+      struct minimal_symbol *minsym;
+
+      p = strchr (last_function_name, ':');
+      if (p == NULL)
+	p = last_function_name;
+      n = p - last_function_name;
+      p = alloca (n + 2);
+      strncpy (p, last_function_name, n);
+      p[n] = 0;
+    
+      minsym = lookup_minimal_symbol (p, pst->filename, objfile);
+      if (minsym == NULL)
+	{
+	  /* Sun Fortran appends an underscore to the minimal symbol name,
+	     try again with an appended underscore if the minimal symbol
+	     was not found.  */
+	  p[n] = '_';
+	  p[n + 1] = 0;
+	  minsym = lookup_minimal_symbol (p, pst->filename, objfile);
+	}
+
+      if (minsym)
+	pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) + MSYMBOL_SIZE (minsym);
+
+      last_function_name = NULL;
+    }
+
+  /* this test will be true if the last .o file is only data */
+  if (textlow_not_set)
+    pst->textlow = pst->texthigh;
+  else
+    {
+      struct partial_symtab *p1;
+
+      /* If we know our own starting text address, then walk through all other
+	 psymtabs for this objfile, and if any didn't know their ending text
+	 address, set it to our starting address.  Take care to not set our
+	 own ending address to our starting address, nor to set addresses on
+	 `dependency' files that have both textlow and texthigh zero.  */
+
+      ALL_OBJFILE_PSYMTABS (objfile, p1)
+	{
+	  if (p1->texthigh == 0  && p1->textlow != 0 && p1 != pst)
+	    {
+	      p1->texthigh = pst->textlow;
+	      /* if this file has only data, then make textlow match texthigh */
+	      if (p1->textlow == 0)
+		p1->textlow = p1->texthigh;
+	    }
+	}
+    }
+
+  /* End of kludge for patching Solaris textlow and texthigh.  */
+#endif /* SOFUN_ADDRESS_MAYBE_MISSING.  */
+
+  pst->n_global_syms =
+    objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+  pst->n_static_syms =
+    objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+  pst->number_of_dependencies = number_dependencies;
+  if (number_dependencies)
+    {
+      pst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       number_dependencies * sizeof (struct partial_symtab *));
+      memcpy (pst->dependencies, dependency_list,
+	     number_dependencies * sizeof (struct partial_symtab *));
+    }
+  else
+    pst->dependencies = 0;
+
+  for (i = 0; i < num_includes; i++)
+    {
+      struct partial_symtab *subpst =
+	allocate_psymtab (include_list[i], objfile);
+
+      subpst->section_offsets = pst->section_offsets;
+      subpst->read_symtab_private =
+	  (char *) obstack_alloc (&objfile->psymbol_obstack,
+				  sizeof (struct symloc));
+      LDSYMOFF(subpst) =
+	LDSYMLEN(subpst) =
+	  subpst->textlow =
+	    subpst->texthigh = 0;
+
+      /* We could save slight bits of space by only making one of these,
+	 shared by the entire set of include files.  FIXME-someday.  */
+      subpst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       sizeof (struct partial_symtab *));
+      subpst->dependencies[0] = pst;
+      subpst->number_of_dependencies = 1;
+
+      subpst->globals_offset =
+	subpst->n_global_syms =
+	  subpst->statics_offset =
+	    subpst->n_static_syms = 0;
+
+      subpst->readin = 0;
+      subpst->symtab = 0;
+      subpst->read_symtab = pst->read_symtab;
+    }
+
+  sort_pst_symbols (pst);
+
+  /* If there is already a psymtab or symtab for a file of this name, remove it.
+     (If there is a symtab, more drastic things also happen.)
+     This happens in VxWorks.  */
+  free_named_symtabs (pst->filename);
+
+  if (num_includes == 0
+      && number_dependencies == 0
+      && pst->n_global_syms == 0
+      && pst->n_static_syms == 0
+      && has_line_numbers == 0)
+    {
+      /* Throw away this psymtab, it's empty.  We can't deallocate it, since
+	 it is on the obstack, but we can forget to chain it on the list.  */
+      /* Empty psymtabs happen as a result of header files which don't have
+	 any symbols in them.  There can be a lot of them.  But this check
+	 is wrong, in that a psymtab with N_SLINE entries but nothing else
+	 is not empty, but we don't realize that.  Fixing that without slowing
+	 things down might be tricky.  */
+
+      discard_psymtab (pst);
+
+      /* Indicate that psymtab was thrown away.  */
+      pst = (struct partial_symtab *)NULL;
+    }
+  return pst;
+}
+
+static void
+dbx_psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *old_chain;
+  int i;
+  
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  /* Read in all partial symtabs on which this one is dependent */
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files that need to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...", pst->dependencies[i]->filename);
+	    wrap_here ("");		/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	dbx_psymtab_to_symtab_1 (pst->dependencies[i]);
+      }
+
+  if (LDSYMLEN(pst))		/* Otherwise it's a dummy */
+    {
+      /* Init stuff necessary for reading in symbols */
+      stabsread_init ();
+      buildsym_init ();
+      old_chain = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+      file_string_table_offset = FILE_STRING_OFFSET (pst);
+      symbol_size = SYMBOL_SIZE (pst);
+
+      /* Read in this file's symbols */
+      bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
+      read_ofile_symtab (pst);
+      sort_symtab_syms (pst->symtab);
+
+      do_cleanups (old_chain);
+    }
+
+  pst->readin = 1;
+}
+
+/* Read in all of the symbols for a given psymtab for real.
+   Be verbose about it if the user wants that.  */
+
+static void
+dbx_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  bfd *sym_bfd;
+
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  if (LDSYMLEN(pst) || pst->number_of_dependencies)
+    {
+      /* Print the message now, before reading the string table,
+	 to avoid disconcerting pauses.  */
+      if (info_verbose)
+	{
+	  printf_filtered ("Reading in symbols for %s...", pst->filename);
+	  gdb_flush (gdb_stdout);
+	}
+
+      sym_bfd = pst->objfile->obfd;
+
+      next_symbol_text_func = dbx_next_symbol_text;
+
+      dbx_psymtab_to_symtab_1 (pst);
+
+      /* Match with global symbols.  This only needs to be done once,
+         after all of the symtabs and dependencies have been read in.   */
+      scan_file_globals (pst->objfile);
+
+      /* Finish up the debug error message.  */
+      if (info_verbose)
+	printf_filtered ("done.\n");
+    }
+}
+
+/* Read in a defined section of a specific object file's symbols. */
+  
+static void
+read_ofile_symtab (pst)
+     struct partial_symtab *pst;
+{
+  register char *namestring;
+  register struct external_nlist *bufp;
+  struct internal_nlist nlist;
+  unsigned char type;
+  unsigned max_symnum;
+  register bfd *abfd;
+  struct objfile *objfile;
+  int sym_offset;		/* Offset to start of symbols to read */
+  int sym_size;			/* Size of symbols to read */
+  CORE_ADDR text_offset;	/* Start of text segment for symbols */
+  int text_size;		/* Size of text segment for symbols */
+  struct section_offsets *section_offsets;
+
+  objfile = pst->objfile;
+  sym_offset = LDSYMOFF(pst);
+  sym_size = LDSYMLEN(pst);
+  text_offset = pst->textlow;
+  text_size = pst->texthigh - pst->textlow;
+  section_offsets = pst->section_offsets;
+
+  current_objfile = objfile;
+  subfile_stack = NULL;
+
+  stringtab_global = DBX_STRINGTAB (objfile);
+  last_source_file = NULL;
+
+  abfd = objfile->obfd;
+  symfile_bfd = objfile->obfd;	/* Implicit param to next_text_symbol */
+  symbuf_end = symbuf_idx = 0;
+
+  /* It is necessary to actually read one symbol *before* the start
+     of this symtab's symbols, because the GCC_COMPILED_FLAG_SYMBOL
+     occurs before the N_SO symbol.
+
+     Detecting this in read_dbx_symtab
+     would slow down initial readin, so we look for it here instead.  */
+  if (!processing_acc_compilation && sym_offset >= (int)symbol_size)
+    {
+      bfd_seek (symfile_bfd, sym_offset - symbol_size, SEEK_CUR);
+      fill_symbuf (abfd);
+      bufp = &symbuf[symbuf_idx++];
+      INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+      OBJSTAT (objfile, n_stabs++);
+
+      SET_NAMESTRING ();
+
+      processing_gcc_compilation = 0;
+      if (nlist.n_type == N_TEXT)
+	{
+	  const char *tempstring = namestring;
+
+	  if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 1;
+	  else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 2;
+	  if (tempstring[0] == bfd_get_symbol_leading_char (symfile_bfd))
+	    ++tempstring;
+	  if (STREQN (tempstring, "__gnu_compiled", 14))
+	    processing_gcc_compilation = 2;
+	}
+
+      /* Try to select a C++ demangling based on the compilation unit
+	 producer. */
+
+      if (processing_gcc_compilation)
+	{
+	  if (AUTO_DEMANGLING)
+	    {
+	      set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+	    }
+	}
+    }
+  else
+    {
+      /* The N_SO starting this symtab is the first symbol, so we
+	 better not check the symbol before it.  I'm not this can
+	 happen, but it doesn't hurt to check for it.  */
+      bfd_seek (symfile_bfd, sym_offset, SEEK_CUR);
+      processing_gcc_compilation = 0;
+    }
+
+  if (symbuf_idx == symbuf_end)
+    fill_symbuf (abfd);
+  bufp = &symbuf[symbuf_idx];
+  if (bfd_h_get_8 (abfd, bufp->e_type) != N_SO)
+    error("First symbol in segment of executable not a source symbol");
+
+  max_symnum = sym_size / symbol_size;
+
+  for (symnum = 0;
+       symnum < max_symnum;
+       symnum++)
+    {
+      QUIT;			/* Allow this to be interruptable */
+      if (symbuf_idx == symbuf_end)
+	fill_symbuf(abfd);
+      bufp = &symbuf[symbuf_idx++];
+      INTERNALIZE_SYMBOL (nlist, bufp, abfd);
+      OBJSTAT (objfile, n_stabs++);
+
+      type = bfd_h_get_8 (abfd, bufp->e_type);
+
+      SET_NAMESTRING ();
+
+      if (type & N_STAB) {
+	  process_one_symbol (type, nlist.n_desc, nlist.n_value,
+			      namestring, section_offsets, objfile);
+      }
+      /* We skip checking for a new .o or -l file; that should never
+         happen in this routine. */
+      else if (type == N_TEXT)
+	{
+	  /* I don't think this code will ever be executed, because
+	     the GCC_COMPILED_FLAG_SYMBOL usually is right before
+	     the N_SO symbol which starts this source file.
+	     However, there is no reason not to accept
+	     the GCC_COMPILED_FLAG_SYMBOL anywhere.  */
+
+	  if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 1;
+	  else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 2;
+
+	  if (AUTO_DEMANGLING)
+	    {
+	      set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+	    }
+	}
+      else if (type & N_EXT || type == (unsigned char)N_TEXT
+	       || type == (unsigned char)N_NBTEXT
+	       ) {
+	  /* Global symbol: see if we came across a dbx defintion for
+	     a corresponding symbol.  If so, store the value.  Remove
+	     syms from the chain when their values are stored, but
+	     search the whole chain, as there may be several syms from
+	     different files with the same name. */
+	  /* This is probably not true.  Since the files will be read
+	     in one at a time, each reference to a global symbol will
+	     be satisfied in each file as it appears. So we skip this
+	     section. */
+	  ;
+        }
+    }
+
+  current_objfile = NULL;
+
+  /* In a Solaris elf file, this variable, which comes from the
+     value of the N_SO symbol, will still be 0.  Luckily, text_offset,
+     which comes from pst->textlow is correct. */
+  if (last_source_start_addr == 0)
+    last_source_start_addr = text_offset;
+
+  /* In reordered executables last_source_start_addr may not be the
+     lower bound for this symtab, instead use text_offset which comes
+     from pst->textlow which is correct.  */
+  if (last_source_start_addr > text_offset)
+    last_source_start_addr = text_offset;
+
+  pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT);
+
+  /* Process items which we had to "process_later" due to dependancies 
+     on other stabs.  */
+  process_now (objfile);	
+
+  end_stabs ();
+}
+
+
+/* This handles a single symbol from the symbol-file, building symbols
+   into a GDB symtab.  It takes these arguments and an implicit argument.
+
+   TYPE is the type field of the ".stab" symbol entry.
+   DESC is the desc field of the ".stab" entry.
+   VALU is the value field of the ".stab" entry.
+   NAME is the symbol name, in our address space.
+   SECTION_OFFSETS is a set of amounts by which the sections of this object
+          file were relocated when it was loaded into memory.
+          All symbols that refer
+	  to memory locations need to be offset by these amounts.
+   OBJFILE is the object file from which we are reading symbols.
+ 	       It is used in end_symtab.  */
+
+void
+process_one_symbol (type, desc, valu, name, section_offsets, objfile)
+     int type, desc;
+     CORE_ADDR valu;
+     char *name;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+#ifdef SUN_FIXED_LBRAC_BUG
+  /* If SUN_FIXED_LBRAC_BUG is defined, then it tells us whether we need
+     to correct the address of N_LBRAC's.  If it is not defined, then
+     we never need to correct the addresses.  */
+
+  /* This records the last pc address we've seen.  We depend on there being
+     an SLINE or FUN or SO before the first LBRAC, since the variable does
+     not get reset in between reads of different symbol files.  */
+  static CORE_ADDR last_pc_address;
+#endif
+
+  register struct context_stack *new;
+  /* This remembers the address of the start of a function.  It is used
+     because in Solaris 2, N_LBRAC, N_RBRAC, and N_SLINE entries are
+     relative to the current function's start address.  On systems
+     other than Solaris 2, this just holds the SECT_OFF_TEXT value, and is
+     used to relocate these symbol types rather than SECTION_OFFSETS.  */
+  static CORE_ADDR function_start_offset;
+
+  /* If this is nonzero, we've seen a non-gcc N_OPT symbol for this source
+     file.  Used to detect the SunPRO solaris compiler.  */
+  static int n_opt_found;
+
+  /* The stab type used for the definition of the last function.
+     N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers.  */
+  static int function_stab_type = 0;
+
+  if (!block_address_function_relative)
+    /* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
+       function start address, so just use the text offset.  */
+    function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
+
+  /* Something is wrong if we see real data before
+     seeing a source file name.  */
+
+  if (last_source_file == NULL && type != (unsigned char)N_SO)
+    {
+      /* Ignore any symbols which appear before an N_SO symbol.
+	 Currently no one puts symbols there, but we should deal
+	 gracefully with the case.  A complain()t might be in order,
+	 but this should not be an error ().  */
+      return;
+    }
+
+  switch (type)
+    {
+    case N_FUN:
+    case N_FNAME:
+
+      if (*name == '\000')
+	{
+	  /* This N_FUN marks the end of a function.  This closes off the
+	     current block.  */
+	  within_function = 0;
+	  new = pop_context ();
+
+	  /* Make a block for the local symbols within.  */
+	  finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, new->start_addr + valu,
+			objfile);
+
+	  /* May be switching to an assembler file which may not be using
+	     block relative stabs, so reset the offset.  */
+	  if (block_address_function_relative)
+	    function_start_offset = 0;
+
+	  break;
+	}
+
+      /* Relocate for dynamic loading */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+#ifdef SMASH_TEXT_ADDRESS
+      SMASH_TEXT_ADDRESS (valu);
+#endif
+      goto define_a_symbol;
+
+    case N_LBRAC:
+      /* This "symbol" just indicates the start of an inner lexical
+	 context within a function.  */
+
+      /* Ignore extra outermost context from SunPRO cc and acc.  */
+      if (n_opt_found && desc == 1)
+	break;
+
+      if (block_address_function_relative)
+	/* Relocate for Sun ELF acc fn-relative syms.  */
+	valu += function_start_offset;
+      else
+	/* On most machines, the block addresses are relative to the
+	   N_SO, the linker did not relocate them (sigh).  */
+	valu += last_source_start_addr;
+
+#ifdef SUN_FIXED_LBRAC_BUG
+      if (!SUN_FIXED_LBRAC_BUG && valu < last_pc_address) {
+	/* Patch current LBRAC pc value to match last handy pc value */
+ 	complain (&lbrac_complaint);
+	valu = last_pc_address;
+      }
+#endif
+      new = push_context (desc, valu);
+      break;
+
+    case N_RBRAC:
+      /* This "symbol" just indicates the end of an inner lexical
+	 context that was started with N_LBRAC.  */
+
+      /* Ignore extra outermost context from SunPRO cc and acc.  */
+      if (n_opt_found && desc == 1)
+	break;
+
+      if (block_address_function_relative)
+	/* Relocate for Sun ELF acc fn-relative syms.  */
+	valu += function_start_offset;
+      else
+	/* On most machines, the block addresses are relative to the
+	   N_SO, the linker did not relocate them (sigh).  */
+	valu += last_source_start_addr;
+
+      new = pop_context();
+      if (desc != new->depth)
+	complain (&lbrac_mismatch_complaint, symnum);
+
+      /* Some compilers put the variable decls inside of an
+         LBRAC/RBRAC block.  This macro should be nonzero if this
+	 is true.  DESC is N_DESC from the N_RBRAC symbol.
+	 GCC_P is true if we've detected the GCC_COMPILED_SYMBOL
+	 or the GCC2_COMPILED_SYMBOL.  */
+#if !defined (VARIABLES_INSIDE_BLOCK)
+#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) 0
+#endif
+
+      /* Can only use new->locals as local symbols here if we're in
+         gcc or on a machine that puts them before the lbrack.  */
+      if (!VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
+	local_symbols = new->locals;
+
+      if (context_stack_depth
+	  > !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
+	{
+	  /* This is not the outermost LBRAC...RBRAC pair in the function,
+	     its local symbols preceded it, and are the ones just recovered
+	     from the context stack.  Define the block for them (but don't
+	     bother if the block contains no symbols.  Should we complain
+	     on blocks without symbols?  I can't think of any useful purpose
+	     for them).  */
+	  if (local_symbols != NULL)
+	    {
+	      /* Muzzle a compiler bug that makes end < start.  (which
+		 compilers?  Is this ever harmful?).  */
+	      if (new->start_addr > valu)
+		{
+		  complain (&lbrac_rbrac_complaint);
+		  new->start_addr = valu;
+		}
+	      /* Make a block for the local symbols within.  */
+	      finish_block (0, &local_symbols, new->old_blocks,
+			    new->start_addr, valu, objfile);
+	    }
+	}
+      else
+	{
+	  /* This is the outermost LBRAC...RBRAC pair.  There is no
+	     need to do anything; leave the symbols that preceded it
+	     to be attached to the function's own block.  We need to
+	     indicate that we just moved outside of the function.  */
+	  within_function = 0;
+	}
+
+      if (VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
+	/* Now pop locals of block just finished.  */
+	local_symbols = new->locals;
+      break;
+
+    case N_FN:
+    case N_FN_SEQ:
+      /* This kind of symbol indicates the start of an object file.  */
+      /* Relocate for dynamic loading */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+      break;
+
+    case N_SO:
+      /* This type of symbol indicates the start of data
+	 for one source file.
+	 Finish the symbol table of the previous source file
+	 (if any) and start accumulating a new symbol table.  */
+      /* Relocate for dynamic loading */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+
+      n_opt_found = 0;
+
+#ifdef SUN_FIXED_LBRAC_BUG
+      last_pc_address = valu;	/* Save for SunOS bug circumcision */
+#endif
+
+#ifdef PCC_SOL_BROKEN
+      /* pcc bug, occasionally puts out SO for SOL.  */
+      if (context_stack_depth > 0)
+	{
+	  start_subfile (name, NULL);
+	  break;
+	}
+#endif
+      if (last_source_file)
+	{
+	  /* Check if previous symbol was also an N_SO (with some
+	     sanity checks).  If so, that one was actually the directory
+	     name, and the current one is the real file name.
+	     Patch things up. */	   
+	  if (previous_stab_code == (unsigned char) N_SO)
+	    {
+	      patch_subfile_names (current_subfile, name);
+	      break;		/* Ignore repeated SOs */
+	    }
+	  end_symtab (valu, objfile, SECT_OFF_TEXT);
+	  end_stabs ();
+	}
+
+      /* Null name means this just marks the end of text for this .o file.
+	 Don't start a new symtab in this case.  */
+      if (*name == '\000')
+	break;
+
+      if (block_address_function_relative)
+        function_start_offset = 0;
+
+      start_stabs ();
+      start_symtab (name, NULL, valu);
+      record_debugformat ("stabs");
+      break;
+
+    case N_SOL:
+      /* This type of symbol indicates the start of data for
+	 a sub-source-file, one whose contents were copied or
+	 included in the compilation of the main source file
+	 (whose name was given in the N_SO symbol.)  */
+      /* Relocate for dynamic loading */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+      start_subfile (name, current_subfile->dirname);
+      break;
+
+    case N_BINCL:
+      push_subfile ();
+      add_new_header_file (name, valu);
+      start_subfile (name, current_subfile->dirname);
+      break;
+
+    case N_EINCL:
+      start_subfile (pop_subfile (), current_subfile->dirname);
+      break;
+
+    case N_EXCL:
+      add_old_header_file (name, valu);
+      break;
+
+    case N_SLINE:
+      /* This type of "symbol" really just records
+	 one line-number -- core-address correspondence.
+	 Enter it in the line list for this symbol table.  */
+
+      /* Relocate for dynamic loading and for ELF acc fn-relative syms.  */
+      valu += function_start_offset;
+
+#ifdef SUN_FIXED_LBRAC_BUG
+      last_pc_address = valu;	/* Save for SunOS bug circumcision */
+#endif
+      record_line (current_subfile, desc, valu);
+      break;
+
+    case N_BCOMM:
+      common_block_start (name, objfile);
+      break;
+
+    case N_ECOMM:
+      common_block_end (objfile);
+      break;
+
+    /* The following symbol types need to have the appropriate offset added
+       to their value; then we process symbol definitions in the name.  */
+
+    case N_STSYM:		/* Static symbol in data seg */
+    case N_LCSYM:		/* Static symbol in BSS seg */
+    case N_ROSYM:		/* Static symbol in Read-only data seg */
+     /* HORRID HACK DEPT.  However, it's Sun's furgin' fault.
+	Solaris2's stabs-in-elf makes *most* symbols relative
+	but leaves a few absolute (at least for Solaris 2.1 and version
+	2.0.1 of the SunPRO compiler).  N_STSYM and friends sit on the fence.
+	.stab "foo:S...",N_STSYM 	is absolute (ld relocates it)
+	.stab "foo:V...",N_STSYM	is relative (section base subtracted).
+	This leaves us no choice but to search for the 'S' or 'V'...
+	(or pass the whole section_offsets stuff down ONE MORE function
+	call level, which we really don't want to do).  */
+      {
+	char *p;
+
+	/* .o files and NLMs have non-zero text seg offsets, but don't need
+	   their static syms offset in this fashion.  XXX - This is really a
+	   crock that should be fixed in the solib handling code so that I
+	   don't have to work around it here. */
+
+	if (!symfile_relocatable)
+	  {
+	    p = strchr (name, ':');
+	    if (p != 0 && p[1] == 'S')
+	      {
+		/* The linker relocated it.  We don't want to add an
+		   elfstab_offset_sections-type offset, but we *do* want
+		   to add whatever solib.c passed to symbol_file_add as
+		   addr (this is known to affect SunOS4, and I suspect ELF
+		   too).  Since elfstab_offset_sections currently does not
+		   muck with the text offset (there is no Ttext.text
+		   symbol), we can get addr from the text offset.  If
+		   elfstab_offset_sections ever starts dealing with the
+		   text offset, and we still need to do this, we need to
+		   invent a SECT_OFF_ADDR_KLUDGE or something.  */
+		valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		goto define_a_symbol;
+	      }
+	  }
+	/* Since it's not the kludge case, re-dispatch to the right handler. */
+	switch (type) {
+	case N_STSYM: 	goto case_N_STSYM;
+	case N_LCSYM:	goto case_N_LCSYM;
+	case N_ROSYM:	goto case_N_ROSYM;
+	default:	abort();
+	}
+      }
+
+    case_N_STSYM:		/* Static symbol in data seg */
+    case N_DSLINE:		/* Source line number, data seg */
+      valu += ANOFFSET (section_offsets, SECT_OFF_DATA);
+      goto define_a_symbol;
+
+    case_N_LCSYM:		/* Static symbol in BSS seg */
+    case N_BSLINE:		/* Source line number, bss seg */
+    /*   N_BROWS:	overlaps with N_BSLINE */
+      valu += ANOFFSET (section_offsets, SECT_OFF_BSS);
+      goto define_a_symbol;
+
+    case_N_ROSYM:		/* Static symbol in Read-only data seg */
+      valu += ANOFFSET (section_offsets, SECT_OFF_RODATA);
+      goto define_a_symbol;
+
+    case N_ENTRY:		/* Alternate entry point */
+      /* Relocate for dynamic loading */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+      goto define_a_symbol;
+
+    /* The following symbol types we don't know how to process.  Handle
+       them in a "default" way, but complain to people who care.  */
+    default:
+    case N_CATCH:		/* Exception handler catcher */
+    case N_EHDECL:		/* Exception handler name */
+    case N_PC:			/* Global symbol in Pascal */
+    case N_M2C:			/* Modula-2 compilation unit */
+    /*   N_MOD2:	overlaps with N_EHDECL */
+    case N_SCOPE:		/* Modula-2 scope information */
+    case N_ECOML:		/* End common (local name) */
+    case N_NBTEXT:		/* Gould Non-Base-Register symbols??? */
+    case N_NBDATA:
+    case N_NBBSS:
+    case N_NBSTS:
+    case N_NBLCS:
+      complain (&unknown_symtype_complaint, local_hex_string (type));
+      /* FALLTHROUGH */
+
+    /* The following symbol types don't need the address field relocated,
+       since it is either unused, or is absolute.  */
+    define_a_symbol:
+    case N_GSYM:		/* Global variable */
+    case N_NSYMS:		/* Number of symbols (ultrix) */
+    case N_NOMAP:		/* No map?  (ultrix) */
+    case N_RSYM:		/* Register variable */
+    case N_DEFD:		/* Modula-2 GNU module dependency */
+    case N_SSYM:		/* Struct or union element */
+    case N_LSYM:		/* Local symbol in stack */
+    case N_PSYM:		/* Parameter variable */
+    case N_LENG:		/* Length of preceding symbol type */
+      if (name)
+	{
+	  int deftype;
+	  char *colon_pos = strchr (name, ':');
+	  if (colon_pos == NULL)
+	    deftype = '\0';
+	  else
+	    deftype = colon_pos[1];
+
+	  switch (deftype)
+	    {
+	    case 'f':
+	    case 'F':
+	      function_stab_type = type;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      /* Deal with the SunPRO 3.0 compiler which omits the address
+                 from N_FUN symbols.  */
+	      if (type == N_FUN
+		  && valu == ANOFFSET (section_offsets, SECT_OFF_TEXT))
+		{
+		  struct minimal_symbol *msym;
+		  char *p;
+		  int n;
+
+		  p = strchr (name, ':');
+		  if (p == NULL)
+		    p = name;
+		  n = p - name;
+		  p = alloca (n + 2);
+		  strncpy (p, name, n);
+		  p[n] = 0;
+
+		  msym = lookup_minimal_symbol (p, last_source_file,
+						objfile);
+		  if (msym == NULL)
+		    {
+		      /* Sun Fortran appends an underscore to the minimal
+			 symbol name, try again with an appended underscore
+			 if the minimal symbol was not found.  */
+		      p[n] = '_';
+		      p[n + 1] = 0;
+		      msym = lookup_minimal_symbol (p, last_source_file,
+						    objfile);
+		    }
+		  if (msym)
+		    valu = SYMBOL_VALUE_ADDRESS (msym);
+		}
+#endif
+
+#ifdef SUN_FIXED_LBRAC_BUG
+	      /* The Sun acc compiler, under SunOS4, puts out
+		 functions with N_GSYM or N_STSYM.  The problem is
+		 that the address of the symbol is no good (for N_GSYM
+		 it doesn't even attept an address; for N_STSYM it
+		 puts out an address but then it gets relocated
+		 relative to the data segment, not the text segment).
+		 Currently we can't fix this up later as we do for
+		 some types of symbol in scan_file_globals.
+		 Fortunately we do have a way of finding the address -
+		 we know that the value in last_pc_address is either
+		 the one we want (if we're dealing with the first
+		 function in an object file), or somewhere in the
+		 previous function. This means that we can use the
+		 minimal symbol table to get the address.  */
+
+	      /* Starting with release 3.0, the Sun acc compiler,
+		 under SunOS4, puts out functions with N_FUN and a value
+		 of zero. This gets relocated to the start of the text
+		 segment of the module, which is no good either.
+		 Under SunOS4 we can deal with this as N_SLINE and N_SO
+		 entries contain valid absolute addresses.
+		 Release 3.0 acc also puts out N_OPT entries, which makes
+		 it possible to discern acc from cc or gcc.  */
+
+	      if (type == N_GSYM || type == N_STSYM
+		  || (type == N_FUN
+		      && n_opt_found && !block_address_function_relative))
+		{
+		  struct minimal_symbol *m;
+		  int l = colon_pos - name;
+
+		  m = lookup_minimal_symbol_by_pc (last_pc_address);
+		  if (m && STREQN (SYMBOL_NAME (m), name, l)
+		      && SYMBOL_NAME (m) [l] == '\0')
+		    /* last_pc_address was in this function */
+		    valu = SYMBOL_VALUE (m);
+		  else if (m && SYMBOL_NAME (m+1)
+			   && STREQN (SYMBOL_NAME (m+1), name, l)
+			   && SYMBOL_NAME (m+1) [l] == '\0')
+		    /* last_pc_address was in last function */
+		    valu = SYMBOL_VALUE (m+1);
+		  else
+		    /* Not found - use last_pc_address (for finish_block) */
+		    valu = last_pc_address;
+		}
+
+	      last_pc_address = valu;	/* Save for SunOS bug circumcision */
+#endif
+
+	      if (block_address_function_relative)
+		/* For Solaris 2.0 compilers, the block addresses and
+		   N_SLINE's are relative to the start of the
+		   function.  On normal systems, and when using gcc on
+		   Solaris 2.0, these addresses are just absolute, or
+		   relative to the N_SO, depending on
+		   BLOCK_ADDRESS_ABSOLUTE.  */
+		function_start_offset = valu;	
+
+	      within_function = 1;
+	      if (context_stack_depth > 0)
+		{
+		  new = pop_context ();
+		  /* Make a block for the local symbols within.  */
+		  finish_block (new->name, &local_symbols, new->old_blocks,
+				new->start_addr, valu, objfile);
+		}
+	      /* Stack must be empty now.  */
+	      if (context_stack_depth != 0)
+		complain (&lbrac_unmatched_complaint, symnum);
+
+	      new = push_context (0, valu);
+	      new->name = define_symbol (valu, name, desc, type, objfile);
+	      break;
+
+	    default:
+	      define_symbol (valu, name, desc, type, objfile);
+	      break;
+	    }
+	}
+      break;
+
+    /* We use N_OPT to carry the gcc2_compiled flag.  Sun uses it
+       for a bunch of other flags, too.  Someday we may parse their
+       flags; for now we ignore theirs and hope they'll ignore ours.  */
+    case N_OPT:			/* Solaris 2:  Compiler options */
+      if (name)
+	{
+	  if (STREQ (name, GCC2_COMPILED_FLAG_SYMBOL))
+	    {
+	      processing_gcc_compilation = 2;
+#if 1	      /* Works, but is experimental.  -fnf */
+	      if (AUTO_DEMANGLING)
+		{
+		  set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+		}
+#endif
+	    }
+	  else
+	    n_opt_found = 1;
+	}
+      break;
+
+    /* The following symbol types can be ignored.  */
+    case N_OBJ:			/* Solaris 2:  Object file dir and name */
+    /*   N_UNDF: 		   Solaris 2:  file separator mark */
+    /*   N_UNDF: -- we will never encounter it, since we only process one
+		    file's symbols at once.  */
+    case N_ENDM:		/* Solaris 2:  End of module */
+    case N_MAIN:		/* Name of main routine.  */
+    case N_ALIAS:		/* SunPro F77: alias name, ignore for now.  */
+      break;
+    }
+
+  /* '#' is a GNU C extension to allow one symbol to refer to another
+     related symbol.
+
+     Generally this is used so that an alias can refer to its main
+     symbol.  */  
+  if (name[0] == '#')
+    {
+      /* Initialize symbol reference names and determine if this is 
+         a definition.  If symbol reference is being defined, go 
+         ahead and add it.  Otherwise, just return sym. */
+
+      char *s = name;
+      int refnum;
+
+      /* If this stab defines a new reference ID that is not on the
+	 reference list, then put it on the reference list.
+
+	 We go ahead and advance NAME past the reference, even though
+	 it is not strictly necessary at this time.  */
+      refnum = symbol_reference_defined (&s);
+      if (refnum >= 0)
+	if (!ref_search (refnum))
+	  ref_add (refnum, 0, name, valu);
+      name = s;
+    }
+
+
+  previous_stab_code = type;
+}
+
+/* FIXME: The only difference between this and elfstab_build_psymtabs
+   is the call to install_minimal_symbols for elf, and the support for
+   split sections.  If the differences are really that small, the code
+   should be shared.  */
+
+/* Scan and build partial symbols for an coff symbol file.
+   The coff file has already been processed to get its minimal symbols.
+
+   This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+   rolled into one.
+
+   OBJFILE is the object file we are reading symbols from.
+   ADDR is the address relative to which the symbols are (e.g.
+   the base address of the text segment).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).
+   TEXTADDR is the address of the text section.
+   TEXTSIZE is the size of the text section.
+   STABSECTS is the list of .stab sections in OBJFILE.
+   STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
+   .stabstr section exists.
+
+   This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
+   adjusted for coff details. */
+
+void
+coffstab_build_psymtabs (objfile, section_offsets, mainline, 
+			       textaddr, textsize, stabsects,
+			       stabstroffset, stabstrsize)
+      struct objfile *objfile;
+      struct section_offsets *section_offsets;
+      int mainline;
+      CORE_ADDR textaddr;
+      unsigned int textsize;
+      struct stab_section_list *stabsects;
+      file_ptr stabstroffset;
+      unsigned int stabstrsize;
+{
+  int val;
+  bfd *sym_bfd = objfile->obfd;
+  char *name = bfd_get_filename (sym_bfd);
+  struct dbx_symfile_info *info;
+  unsigned int stabsize;
+
+  /* There is already a dbx_symfile_info allocated by our caller.
+     It might even contain some info from the coff symtab to help us.  */
+  info = objfile->sym_stab_info;
+
+  DBX_TEXT_ADDR (objfile) = textaddr;
+  DBX_TEXT_SIZE (objfile) = textsize;
+
+#define	COFF_STABS_SYMBOL_SIZE	12	/* XXX FIXME XXX */
+  DBX_SYMBOL_SIZE    (objfile) = COFF_STABS_SYMBOL_SIZE;
+  DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
+  
+  if (stabstrsize > bfd_get_size (sym_bfd))
+    error ("ridiculous string table size: %d bytes", stabstrsize);
+  DBX_STRINGTAB (objfile) = (char *)
+    obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+  OBJSTAT (objfile, sz_strtab += stabstrsize+1);
+
+  /* Now read in the string table in one big gulp.  */
+
+  val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
+  if (val < 0)
+    perror_with_name (name);
+  val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
+  if (val != stabstrsize)
+    perror_with_name (name);
+
+  stabsread_new_init ();
+  buildsym_new_init ();
+  free_header_files ();
+  init_header_files ();
+
+  processing_acc_compilation = 1;
+
+  /* In a coff file, we've already installed the minimal symbols that came
+     from the coff (non-stab) symbol table, so always act like an
+     incremental load here. */
+  if (stabsects->next == NULL)
+    {
+      stabsize = bfd_section_size (sym_bfd, stabsects->section);
+      DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+      DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+    }
+  else
+    {
+      struct stab_section_list *stabsect;
+
+      DBX_SYMCOUNT (objfile) = 0;
+      for (stabsect = stabsects; stabsect != NULL; stabsect = stabsect->next)
+	{
+	  stabsize = bfd_section_size (sym_bfd, stabsect->section);
+	  DBX_SYMCOUNT (objfile) += stabsize / DBX_SYMBOL_SIZE (objfile);
+	}
+
+      DBX_SYMTAB_OFFSET (objfile) = stabsects->section->filepos;
+
+      symbuf_sections = stabsects->next;
+      symbuf_left = bfd_section_size (sym_bfd, stabsects->section);
+      symbuf_read = 0;
+    }
+
+  dbx_symfile_read (objfile, section_offsets, 0);
+}
+
+/* Scan and build partial symbols for an ELF symbol file.
+   This ELF file has already been processed to get its minimal symbols,
+   and any DWARF symbols that were in it.
+
+   This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+   rolled into one.
+
+   OBJFILE is the object file we are reading symbols from.
+   ADDR is the address relative to which the symbols are (e.g.
+   the base address of the text segment).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).
+   STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
+   section exists.
+   STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
+   .stabstr section exists.
+
+   This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
+   adjusted for elf details. */
+
+void
+elfstab_build_psymtabs (objfile, section_offsets, mainline, 
+			       staboffset, stabsize,
+			       stabstroffset, stabstrsize)
+      struct objfile *objfile;
+      struct section_offsets *section_offsets;
+      int mainline;
+      file_ptr staboffset;
+      unsigned int stabsize;
+      file_ptr stabstroffset;
+      unsigned int stabstrsize;
+{
+  int val;
+  bfd *sym_bfd = objfile->obfd;
+  char *name = bfd_get_filename (sym_bfd);
+  struct dbx_symfile_info *info;
+  asection *text_sect;
+
+  /* There is already a dbx_symfile_info allocated by our caller.
+     It might even contain some info from the ELF symtab to help us.  */
+  info = objfile->sym_stab_info;
+
+  text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+  if (!text_sect)
+    error ("Can't find .text section in symbol file");
+  DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+  DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
+
+#define	ELF_STABS_SYMBOL_SIZE	12	/* XXX FIXME XXX */
+  DBX_SYMBOL_SIZE    (objfile) = ELF_STABS_SYMBOL_SIZE;
+  DBX_SYMCOUNT       (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
+  DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
+  DBX_SYMTAB_OFFSET  (objfile) = staboffset;
+  
+  if (stabstrsize > bfd_get_size (sym_bfd))
+    error ("ridiculous string table size: %d bytes", stabstrsize);
+  DBX_STRINGTAB (objfile) = (char *)
+    obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
+  OBJSTAT (objfile, sz_strtab += stabstrsize+1);
+
+  /* Now read in the string table in one big gulp.  */
+
+  val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
+  if (val < 0)
+    perror_with_name (name);
+  val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
+  if (val != stabstrsize)
+    perror_with_name (name);
+
+  stabsread_new_init ();
+  buildsym_new_init ();
+  free_header_files ();
+  init_header_files ();
+  install_minimal_symbols (objfile);
+
+  processing_acc_compilation = 1;
+
+  /* In an elf file, we've already installed the minimal symbols that came
+     from the elf (non-stab) symbol table, so always act like an
+     incremental load here. */
+  dbx_symfile_read (objfile, section_offsets, 0);
+}
+
+/* Scan and build partial symbols for a file with special sections for stabs
+   and stabstrings.  The file has already been processed to get its minimal
+   symbols, and any other symbols that might be necessary to resolve GSYMs.
+
+   This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
+   rolled into one.
+
+   OBJFILE is the object file we are reading symbols from.
+   ADDR is the address relative to which the symbols are (e.g. the base address
+	of the text segment).
+   MAINLINE is true if we are reading the main symbol table (as opposed to a
+	    shared lib or dynamically loaded file).
+   STAB_NAME is the name of the section that contains the stabs.
+   STABSTR_NAME is the name of the section that contains the stab strings.
+
+   This routine is mostly copied from dbx_symfile_init and dbx_symfile_read. */
+
+void
+stabsect_build_psymtabs (objfile, section_offsets, mainline, stab_name,
+			 stabstr_name, text_name)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+     char *stab_name;
+     char *stabstr_name;
+     char *text_name;
+{
+  int val;
+  bfd *sym_bfd = objfile->obfd;
+  char *name = bfd_get_filename (sym_bfd);
+  asection *stabsect;
+  asection *stabstrsect;
+  asection *text_sect;
+
+  stabsect = bfd_get_section_by_name (sym_bfd, stab_name);
+  stabstrsect = bfd_get_section_by_name (sym_bfd, stabstr_name);
+
+  if (!stabsect)
+    return;
+
+  if (!stabstrsect)
+    error ("stabsect_build_psymtabs:  Found stabs (%s), but not string section (%s)",
+	   stab_name, stabstr_name);
+
+  objfile->sym_stab_info = (struct dbx_symfile_info *)
+    xmalloc (sizeof (struct dbx_symfile_info));
+  memset (objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+
+  text_sect = bfd_get_section_by_name (sym_bfd, text_name);
+  if (!text_sect)
+    error ("Can't find %s section in symbol file", text_name);
+  DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+  DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
+
+  DBX_SYMBOL_SIZE    (objfile) = sizeof (struct external_nlist);
+  DBX_SYMCOUNT       (objfile) = bfd_section_size (sym_bfd, stabsect)
+    / DBX_SYMBOL_SIZE (objfile);
+  DBX_STRINGTAB_SIZE (objfile) = bfd_section_size (sym_bfd, stabstrsect);
+  DBX_SYMTAB_OFFSET  (objfile) = stabsect->filepos; /* XXX - FIXME: POKING INSIDE BFD DATA STRUCTURES */
+  
+  if (DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
+    error ("ridiculous string table size: %d bytes", DBX_STRINGTAB_SIZE (objfile));
+  DBX_STRINGTAB (objfile) = (char *)
+    obstack_alloc (&objfile->psymbol_obstack, DBX_STRINGTAB_SIZE (objfile) + 1);
+  OBJSTAT (objfile, sz_strtab += DBX_STRINGTAB_SIZE (objfile) + 1);
+
+  /* Now read in the string table in one big gulp.  */
+
+  val = bfd_get_section_contents (sym_bfd, /* bfd */
+				  stabstrsect, /* bfd section */
+				  DBX_STRINGTAB (objfile), /* input buffer */
+				  0, /* offset into section */
+				  DBX_STRINGTAB_SIZE (objfile)); /* amount to read */
+
+  if (!val)
+    perror_with_name (name);
+
+  stabsread_new_init ();
+  buildsym_new_init ();
+  free_header_files ();
+  init_header_files ();
+  install_minimal_symbols (objfile);
+
+  /* Now, do an incremental load */
+
+  processing_acc_compilation = 1;
+  dbx_symfile_read (objfile, section_offsets, 0);
+}
+
+static struct sym_fns aout_sym_fns =
+{
+  bfd_target_aout_flavour,
+  dbx_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  dbx_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  dbx_symfile_read,	/* sym_read: read a symbol file into symtab */
+  dbx_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,
+			/* sym_offsets: parse user's offsets to internal form */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_dbxread ()
+{
+  add_symtab_fns(&aout_sym_fns);
+}
diff --git a/gdb/dcache.c b/gdb/dcache.c
new file mode 100644
index 0000000..a97a940
--- /dev/null
+++ b/gdb/dcache.c
@@ -0,0 +1,558 @@
+/* Caching code.  Typically used by remote back ends for
+   caching remote memory.
+
+   Copyright 1992, 1993, 1995, 1998 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "dcache.h"
+#include "gdbcmd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+
+/* 
+   The data cache could lead to incorrect results because it doesn't know
+   about volatile variables, thus making it impossible to debug
+   functions which use memory mapped I/O devices.
+
+   set remotecache 0
+
+   In those cases.
+
+   In general the dcache speeds up performance, some speed improvement
+   comes from the actual caching mechanism, but the major gain is in
+   the reduction of the remote protocol overhead; instead of reading
+   or writing a large area of memory in 4 byte requests, the cache
+   bundles up the requests into 32 byte (actually LINE_SIZE) chunks.
+   Reducing the overhead to an eighth of what it was.  This is very
+   obvious when displaying a large amount of data,
+
+   eg, x/200x 0 
+
+   caching     |   no    yes 
+   ---------------------------- 
+   first time  |   4 sec  2 sec improvement due to chunking 
+   second time |   4 sec  0 sec improvement due to caching
+
+   The cache structure is unusual, we keep a number of cache blocks
+   (DCACHE_SIZE) and each one caches a LINE_SIZEed area of memory.
+   Within each line we remember the address of the line (always a
+   multiple of the LINE_SIZE) and a vector of bytes over the range.
+   There's another vector which contains the state of the bytes.
+
+   ENTRY_BAD means that the byte is just plain wrong, and has no
+   correspondence with anything else (as it would when the cache is
+   turned on, but nothing has been done to it.
+
+   ENTRY_DIRTY means that the byte has some data in it which should be
+   written out to the remote target one day, but contains correct
+   data.  ENTRY_OK means that the data is the same in the cache as it
+   is in remote memory.
+
+
+   The ENTRY_DIRTY state is necessary because GDB likes to write large
+   lumps of memory in small bits.  If the caching mechanism didn't
+   maintain the DIRTY information, then something like a two byte
+   write would mean that the entire cache line would have to be read,
+   the two bytes modified and then written out again.  The alternative
+   would be to not read in the cache line in the first place, and just
+   write the two bytes directly into target memory.  The trouble with
+   that is that it really nails performance, because of the remote
+   protocol overhead.  This way, all those little writes are bundled
+   up into an entire cache line write in one go, without having to
+   read the cache line in the first place.
+
+
+  */
+
+
+/* This value regulates the number of cache blocks stored.
+   Smaller values reduce the time spent searching for a cache
+   line, and reduce memory requirements, but increase the risk
+   of a line not being in memory */
+
+#define DCACHE_SIZE 64 
+
+/* This value regulates the size of a cache line.  Smaller values
+   reduce the time taken to read a single byte, but reduce overall
+   throughput.  */
+
+#define LINE_SIZE_POWER (5) 
+#define LINE_SIZE (1 << LINE_SIZE_POWER)
+
+/* Each cache block holds LINE_SIZE bytes of data
+   starting at a multiple-of-LINE_SIZE address.  */
+
+#define LINE_SIZE_MASK  ((LINE_SIZE - 1))	
+#define XFORM(x) 	((x) & LINE_SIZE_MASK)
+#define MASK(x)         ((x) & ~LINE_SIZE_MASK)
+
+
+#define ENTRY_BAD   0  /* data at this byte is wrong */
+#define ENTRY_DIRTY 1  /* data at this byte needs to be written back */
+#define ENTRY_OK    2  /* data at this byte is same as in memory */
+
+
+struct dcache_block
+{
+  struct dcache_block *p;	/* next in list */
+  CORE_ADDR addr;		/* Address for which data is recorded.  */
+  char data[LINE_SIZE];		/* bytes at given address */
+  unsigned char state[LINE_SIZE]; /* what state the data is in */
+
+  /* whether anything in state is dirty - used to speed up the 
+     dirty scan. */
+  int anydirty;			
+
+  int refs;
+};
+
+
+struct dcache_struct 
+{
+  /* Function to actually read the target memory. */
+  memxferfunc read_memory;
+
+  /* Function to actually write the target memory */
+  memxferfunc write_memory;
+
+  /* free list */
+  struct dcache_block *free_head;
+  struct dcache_block *free_tail;
+
+  /* in use list */
+  struct dcache_block *valid_head;
+  struct dcache_block *valid_tail;
+
+  /* The cache itself. */
+  struct dcache_block *the_cache;
+
+  /* potentially, if the cache was enabled, and then turned off, and
+     then turned on again, the stuff in it could be stale, so this is
+     used to mark it */
+  int cache_has_stuff;
+} ;
+
+static int dcache_poke_byte PARAMS ((DCACHE *dcache, CORE_ADDR addr, 
+                                     char *ptr));
+
+static int dcache_peek_byte PARAMS ((DCACHE *dcache, CORE_ADDR addr, 
+                                     char *ptr));
+
+static struct dcache_block *dcache_hit PARAMS ((DCACHE *dcache, 
+                                                CORE_ADDR addr));
+
+static int dcache_write_line PARAMS ((DCACHE *dcache,struct dcache_block *db));
+
+static struct dcache_block *dcache_alloc PARAMS ((DCACHE *dcache));
+
+static int dcache_writeback PARAMS ((DCACHE *dcache));
+
+static void dcache_info PARAMS ((char *exp, int tty));
+
+void _initialize_dcache PARAMS ((void));
+
+int remote_dcache = 0;
+
+DCACHE *last_cache; /* Used by info dcache */
+
+
+/* Free all the data cache blocks, thus discarding all cached data.  */
+
+void
+dcache_flush (dcache)
+     DCACHE *dcache;
+{
+  int i;
+  dcache->valid_head = 0;
+  dcache->valid_tail = 0;
+
+  dcache->free_head = 0;
+  dcache->free_tail = 0;
+
+  for (i = 0; i < DCACHE_SIZE; i++)
+    {
+      struct dcache_block *db = dcache->the_cache + i;
+
+      if (!dcache->free_head)
+	dcache->free_head = db;
+      else
+	dcache->free_tail->p = db;
+      dcache->free_tail = db;
+      db->p = 0;
+    }
+
+  dcache->cache_has_stuff = 0;
+
+  return;
+}
+
+/* If addr is present in the dcache, return the address of the block
+   containing it. */
+
+static struct dcache_block *
+dcache_hit (dcache, addr)
+     DCACHE *dcache;
+     CORE_ADDR addr;
+{
+  register struct dcache_block *db;
+
+  /* Search all cache blocks for one that is at this address.  */
+  db = dcache->valid_head;
+
+  while (db)
+    {
+      if (MASK(addr) == db->addr)
+	{
+	  db->refs++;
+	  return db;
+	}
+      db = db->p;
+    }
+
+  return NULL;
+}
+
+/* Make sure that anything in this line which needs to
+   be written is. */
+
+static int
+dcache_write_line (dcache, db)
+     DCACHE *dcache;
+     register struct dcache_block *db;
+{
+  int s;
+  int e;
+  s = 0;
+  if (db->anydirty)
+    {
+      for (s = 0; s < LINE_SIZE; s++)
+	{
+	  if (db->state[s] == ENTRY_DIRTY)
+	    {
+	      int len = 0;
+	      for (e = s ; e < LINE_SIZE; e++, len++)
+		if (db->state[e] != ENTRY_DIRTY)
+		  break;
+	      {
+		/* all bytes from s..s+len-1 need to
+		   be written out */
+		int done = 0;
+		while (done < len) {
+		  int t = dcache->write_memory (db->addr + s + done,
+						db->data + s + done,
+						len - done);
+		  if (t == 0)
+		    return 0;
+		  done += t;
+		}
+		memset (db->state + s, ENTRY_OK, len);
+		s = e;
+	      }
+	    }
+	}
+      db->anydirty = 0;
+    }
+  return 1;
+}
+
+
+/* Get a free cache block, put or keep it on the valid list,
+   and return its address.  The caller should store into the block
+   the address and data that it describes, then remque it from the
+   free list and insert it into the valid list.  This procedure
+   prevents errors from creeping in if a memory retrieval is
+   interrupted (which used to put garbage blocks in the valid
+   list...).  */
+
+static struct dcache_block *
+dcache_alloc (dcache)
+     DCACHE *dcache;
+{
+  register struct dcache_block *db;
+
+  if (remote_dcache == 0)
+    abort ();
+
+  /* Take something from the free list */
+  db = dcache->free_head;
+  if (db)
+    {
+      dcache->free_head = db->p;
+    }
+  else
+    {
+      /* Nothing left on free list, so grab one from the valid list */
+      db = dcache->valid_head;
+      dcache->valid_head = db->p;
+
+      dcache_write_line (dcache, db);
+    }
+
+  /* append this line to end of valid list */
+  if (!dcache->valid_head)
+    dcache->valid_head = db;
+  else
+    dcache->valid_tail->p = db;
+  dcache->valid_tail = db;
+  db->p = 0;
+
+  return db;
+}
+
+/* Using the data cache DCACHE return the contents of the byte at
+   address ADDR in the remote machine.  
+
+   Returns 0 on error. */
+
+static int
+dcache_peek_byte (dcache, addr, ptr)
+     DCACHE *dcache;
+     CORE_ADDR addr;
+     char *ptr;
+{
+  register struct dcache_block *db = dcache_hit (dcache, addr);
+  int ok=1;
+  int done = 0;
+  if (db == 0
+      || db->state[XFORM (addr)] == ENTRY_BAD)
+    {
+      if (db)
+	{
+	  dcache_write_line (dcache, db);
+	}
+    else
+      db = dcache_alloc (dcache);
+      immediate_quit++;
+      db->addr = MASK (addr);
+      while (done < LINE_SIZE) 
+	{
+	  int try =
+	    (*dcache->read_memory)
+	      (db->addr + done,
+	       db->data + done,
+	       LINE_SIZE - done);
+	  if (try == 0)
+	    return 0;
+	  done += try;
+	}
+      immediate_quit--;
+     
+      memset (db->state, ENTRY_OK, sizeof (db->data));
+      db->anydirty = 0;
+    }
+  *ptr = db->data[XFORM (addr)];
+  return ok;
+}
+
+/* Writeback any dirty lines to the remote. */
+static int
+dcache_writeback (dcache)
+     DCACHE *dcache;
+{
+  struct dcache_block *db;
+
+  db = dcache->valid_head;
+
+  while (db)
+    {
+      if (!dcache_write_line (dcache, db))
+	return 0;
+      db = db->p;
+    }
+  return 1;
+}
+
+
+/* Using the data cache DCACHE return the contents of the word at
+   address ADDR in the remote machine.  */
+int
+dcache_fetch (dcache, addr)
+     DCACHE *dcache;
+     CORE_ADDR addr;
+{
+  int res;
+
+  if (dcache_xfer_memory (dcache, addr, (char *)&res, sizeof res, 0) != sizeof res)
+    memory_error (EIO, addr);
+
+  return res;
+}
+
+
+/* Write the byte at PTR into ADDR in the data cache.
+   Return zero on write error.
+ */
+
+static int
+dcache_poke_byte (dcache, addr, ptr)
+     DCACHE *dcache;
+     CORE_ADDR addr;
+     char *ptr;
+{
+  register struct dcache_block *db = dcache_hit (dcache, addr);
+
+  if (!db)
+    {
+      db = dcache_alloc (dcache);
+      db->addr = MASK (addr);
+      memset (db->state, ENTRY_BAD, sizeof (db->data));
+    }
+
+  db->data[XFORM (addr)] = *ptr;
+  db->state[XFORM (addr)] = ENTRY_DIRTY;
+  db->anydirty = 1;
+  return 1;
+}
+
+/* Write the word at ADDR both in the data cache and in the remote machine.  
+   Return zero on write error.
+ */
+
+int
+dcache_poke (dcache, addr, data)
+     DCACHE *dcache;
+     CORE_ADDR addr;
+     int data;
+{
+  if (dcache_xfer_memory (dcache, addr, (char *)&data, sizeof data, 1) != sizeof data)
+    return 0;
+
+  return dcache_writeback (dcache);
+}
+
+
+/* Initialize the data cache.  */
+DCACHE *
+dcache_init (reading, writing)
+     memxferfunc reading;
+     memxferfunc writing;
+{
+  int csize = sizeof (struct dcache_block) * DCACHE_SIZE;
+  DCACHE *dcache;
+
+  dcache = (DCACHE *) xmalloc (sizeof (*dcache));
+  dcache->read_memory = reading;
+  dcache->write_memory = writing;
+
+  dcache->the_cache = (struct dcache_block *) xmalloc (csize);
+  memset (dcache->the_cache, 0, csize);
+
+  dcache_flush (dcache);
+
+  last_cache = dcache;
+  return dcache;
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
+   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is
+   nonzero. 
+
+   Returns length of data written or read; 0 for error.  
+
+   This routine is indended to be called by remote_xfer_ functions. */
+
+int
+dcache_xfer_memory (dcache, memaddr, myaddr, len, should_write)
+     DCACHE *dcache;
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+{
+  int i;
+
+  if (remote_dcache) 
+    {
+      int (*xfunc) PARAMS ((DCACHE *dcache, CORE_ADDR addr, char *ptr));
+      xfunc = should_write ? dcache_poke_byte : dcache_peek_byte;
+
+      for (i = 0; i < len; i++)
+	{
+	  if (!xfunc (dcache, memaddr + i, myaddr + i))
+	    return 0;
+	}
+      dcache->cache_has_stuff = 1;
+      dcache_writeback (dcache);
+    }
+  else 
+    {
+      memxferfunc xfunc;
+      xfunc = should_write ? dcache->write_memory : dcache->read_memory;
+
+      if (dcache->cache_has_stuff)
+	dcache_flush (dcache);
+
+      len = xfunc (memaddr, myaddr, len);
+    }
+  return len;
+}
+
+static void 
+dcache_info (exp, tty)
+     char *exp;
+     int tty;
+{
+  struct dcache_block *p;
+
+  if (!remote_dcache)
+    {
+      printf_filtered ("Dcache not enabled\n");
+      return;
+    }
+  printf_filtered ("Dcache enabled, line width %d, depth %d\n",
+		   LINE_SIZE, DCACHE_SIZE);
+
+  printf_filtered ("Cache state:\n");
+
+  for (p = last_cache->valid_head; p; p = p->p)
+    {
+      int j;
+      printf_filtered ("Line at %08xd, referenced %d times\n",
+		       p->addr, p->refs);
+
+      for (j = 0; j < LINE_SIZE; j++)
+	printf_filtered ("%02x", p->data[j] & 0xFF);
+      printf_filtered ("\n");
+
+      for (j = 0; j < LINE_SIZE; j++)
+	printf_filtered (" %2x", p->state[j]);
+      printf_filtered ("\n");
+    }
+}
+
+void
+_initialize_dcache ()
+{
+  add_show_from_set
+    (add_set_cmd ("remotecache", class_support, var_boolean,
+		  (char *) &remote_dcache,
+		  "\
+Set cache use for remote targets.\n\
+When on, use data caching for remote targets.  For many remote targets\n\
+this option can offer better throughput for reading target memory.\n\
+Unfortunately, gdb does not currently know anything about volatile\n\
+registers and thus data caching will produce incorrect results with\n\
+volatile registers are in use.  By default, this option is on.",
+		  &setlist),
+     &showlist);
+
+  add_info ("dcache", dcache_info,
+	    "Print information on the dcache performance.");
+
+}
diff --git a/gdb/dcache.h b/gdb/dcache.h
new file mode 100644
index 0000000..a0b762a
--- /dev/null
+++ b/gdb/dcache.h
@@ -0,0 +1,50 @@
+/* Declarations for caching.  Typically used by remote back ends for
+   caching remote memory.
+
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef DCACHE_H
+#define DCACHE_H
+
+typedef int (*memxferfunc) PARAMS((CORE_ADDR memaddr,
+			     char *myaddr,
+			     int len));
+
+typedef struct dcache_struct DCACHE;
+
+/* Using the data cache DCACHE return the contents of the word at
+   address ADDR in the remote machine.  */
+int dcache_fetch PARAMS((DCACHE *dcache, CORE_ADDR addr));
+
+/* Flush DCACHE. */
+void dcache_flush PARAMS((DCACHE *dcache));
+
+/* Initialize DCACHE. */
+DCACHE *dcache_init PARAMS((memxferfunc reading, memxferfunc writing));
+
+/* Write the word at ADDR both in the data cache and in the remote machine.  */
+int dcache_poke PARAMS((DCACHE *dcache, CORE_ADDR addr, int data));
+
+/* Simple to call from <remote>_xfer_memory */
+
+int dcache_xfer_memory PARAMS((DCACHE *cache, CORE_ADDR mem, char *my, int len, int should_write));
+
+/* Write the bytes at ADDR into the data cache and the remote machine. */
+int dcache_poke_block PARAMS((DCACHE *cache, CORE_ADDR mem, char* my, int len));
+#endif /* DCACHE_H */
diff --git a/gdb/debugify.c b/gdb/debugify.c
new file mode 100644
index 0000000..841b589
--- /dev/null
+++ b/gdb/debugify.c
@@ -0,0 +1,109 @@
+
+/* Debug macros for developemnt.
+   Copyright 1997
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define DEBUGIFY
+#include "debugify.h"
+#include "config.h"
+
+#include <stdio.h>
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#include <strings.h>
+#endif
+
+#define REDIRECT
+
+static FILE *fout = NULL;
+static char fname[128];
+static int file_cnt = 0;	/* count number of open files */
+
+void 
+puts_dbg (data)
+  const char *data;
+{
+  FILE *fdbg;
+
+  fdbg = fopen ("dbg.log", "a+");
+  if (fdbg == NULL)
+    return;
+  fprintf (fdbg, data);
+  fclose (fdbg);
+}
+
+/* Can't easily get the message back to gdb... write to a log instead. */
+void 
+fputs_dbg (data, fakestream)
+  const char *data;
+  FILE *fakestream;
+{
+#ifdef REDIRECT
+  puts_dbg (data);
+#else /* REDIRECT */
+
+  if (fakestream == stdout || fakestream == stderr || fakestream == NULL)
+    {
+      if (fout == NULL)
+	{
+	  for (file_cnt = 0; file_cnt < 20; file_cnt++)
+	    {
+	      sprintf (fname, "dbg%d.log", file_cnt);
+	      if ((fout = fopen (fname), "r") != NULL)
+		fclose (fout);
+	      else
+		break;
+	    }
+	  fout = fopen (fname, "w");
+	  if (fout == NULL)
+	    return;
+	}
+      fakestream = fout;
+    }
+  fprintf (fakestream, data);
+  fflush (fakestream);
+#endif /* REDIRECT */
+}
+
+void 
+#ifdef ANSI_PROTOTYPES
+printf_dbg (const char *format,...)
+#else
+printf_dbg (va_alist) 
+     va_dcl
+#endif
+{
+  va_list args;
+  char buf[256];
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  char *format;
+
+  va_start (args);
+  format = va_arg (args, char *); 
+#endif
+  vsprintf (buf, format, args);
+  puts_dbg (buf);
+  va_end (args);
+}
diff --git a/gdb/debugify.h b/gdb/debugify.h
new file mode 100644
index 0000000..b4ae92b
--- /dev/null
+++ b/gdb/debugify.h
@@ -0,0 +1,83 @@
+
+/* Debug macros for development.
+   Copyright 1997
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _DEBUGIFY_H_
+#define _DEBUGIFY_H_
+
+#include "ansidecl.h"
+
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#ifdef DEBUGIFY
+#include <assert.h>
+#ifdef TO_SCREEN
+#ifdef _Win32
+#define DBG(x) OutputDebugString x
+#else
+#define DBG(x) printf x
+#endif
+#elif TO_GDB
+#define DBG(x) printf_unfiltered x
+#elif TO_POPUP
+#ifdef _Win32
+#define DBG(x) MessageBox x
+#else
+#define DBG(x) printf x
+#endif
+#else /* default: TO_FILE "gdb.log" */
+#define DBG(x) printf_dbg x
+#endif
+
+#define ASSERT(x) assert(x)
+
+#else /* DEBUGIFY */
+#define DBG(x)
+#define ASSERT(x)
+#endif
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#ifdef REDIRECT
+#define printf_unfiltered printf_dbg
+#define fputs_unfiltered fputs_dbg
+  extern void fputs_dbg PARAMS ((const char *fmt, FILE * fakestream));
+#endif /* REDIRECT */
+
+  extern void puts_dbg PARAMS ((const char *fmt));
+#ifdef ANSI_PROTOTYPES
+  extern void printf_dbg PARAMS ((const char *fmt,...));
+#else
+  extern void printf_dbg PARAMS ((va_alist va_dcl));
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DEBUGIFY_H_ */
diff --git a/gdb/defs.h b/gdb/defs.h
new file mode 100644
index 0000000..c0552a1
--- /dev/null
+++ b/gdb/defs.h
@@ -0,0 +1,1139 @@
+/* Basic, host-specific, and target-specific definitions for GDB.
+   Copyright (C) 1986, 89, 91, 92, 93, 94, 95, 96, 98, 1999
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef DEFS_H
+#define DEFS_H
+
+#include "config.h"		/* Generated by configure */
+#include <stdio.h>
+#include <errno.h>		/* System call error return status */
+#include <limits.h>
+
+#ifdef HAVE_STDDEF_H
+#  include <stddef.h>
+#else
+#  include <sys/types.h>   /* for size_t */
+#endif
+
+/* Just in case they're not defined in stdio.h. */
+
+#ifndef SEEK_SET
+#define SEEK_SET 0
+#endif
+#ifndef SEEK_CUR
+#define SEEK_CUR 1
+#endif
+
+/* First include ansidecl.h so we can use the various macro definitions
+   here and in all subsequent file inclusions.  */
+
+#include "ansidecl.h"
+
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include "libiberty.h"
+
+/* libiberty.h can't declare this one, but evidently we can.  */
+extern char *strsignal PARAMS ((int));
+
+#include "progress.h"
+
+#ifdef USE_MMALLOC
+#include "mmalloc.h"
+#endif
+
+/* For BFD64 and bfd_vma.  */
+#include "bfd.h"
+
+/* An address in the program being debugged.  Host byte order.  Rather
+   than duplicate all the logic in BFD which figures out what type
+   this is (long, long long, etc.) and whether it needs to be 64
+   bits (the host/target interactions are subtle), we just use
+   bfd_vma.  */
+
+typedef bfd_vma CORE_ADDR;
+
+#ifndef min
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#endif
+#ifndef max
+#define max(a, b) ((a) > (b) ? (a) : (b))
+#endif
+
+/* Gdb does *lots* of string compares.  Use macros to speed them up by
+   avoiding function calls if the first characters are not the same. */
+
+#define STRCMP(a,b) (*(a) == *(b) ? strcmp ((a), (b)) : (int)*(a) - (int)*(b))
+#define STREQ(a,b) (*(a) == *(b) ? !strcmp ((a), (b)) : 0)
+#define STREQN(a,b,c) (*(a) == *(b) ? !strncmp ((a), (b), (c)) : 0)
+
+/* The character GNU C++ uses to build identifiers that must be unique from
+   the program's identifiers (such as $this and $$vptr).  */
+#define CPLUS_MARKER '$'	/* May be overridden to '.' for SysV */
+
+/* Check if a character is one of the commonly used C++ marker characters.  */
+extern int is_cplus_marker PARAMS ((int));
+
+/* use tui interface if non-zero */
+extern int tui_version;
+
+#if defined(TUI)
+/* all invocations of TUIDO should have two sets of parens */
+#define TUIDO(x)	tuiDo x
+#else
+#define TUIDO(x)
+#endif
+
+/* enable xdb commands if set */
+extern int xdb_commands;
+
+/* enable dbx commands if set */
+extern int dbx_commands;
+
+extern int quit_flag;
+extern int immediate_quit;
+extern int sevenbit_strings;
+
+extern void quit PARAMS ((void));
+
+#ifdef QUIT
+/* do twice to force compiler warning */
+#define QUIT_FIXME "FIXME"
+#define QUIT_FIXME "ignoring redefinition of QUIT"
+#else
+#define QUIT { \
+  if (quit_flag) quit (); \
+  if (interactive_hook) interactive_hook (); \
+  PROGRESS (1); \
+}
+#endif
+
+/* Command classes are top-level categories into which commands are broken
+   down for "help" purposes.  
+   Notes on classes: class_alias is for alias commands which are not
+   abbreviations of the original command.  class-pseudo is for commands
+   which are not really commands nor help topics ("stop").  */
+
+enum command_class
+{
+  /* Special args to help_list */
+  all_classes = -2, all_commands = -1,
+  /* Classes of commands */
+  no_class = -1, class_run = 0, class_vars, class_stack,
+  class_files, class_support, class_info, class_breakpoint, class_trace,
+  class_alias, class_obscure, class_user, class_maintenance,
+  class_pseudo, class_tui, class_xdb
+};
+
+/* Languages represented in the symbol table and elsewhere.
+   This should probably be in language.h, but since enum's can't
+   be forward declared to satisfy opaque references before their
+   actual definition, needs to be here. */
+
+enum language 
+{
+   language_unknown, 		/* Language not known */
+   language_auto,		/* Placeholder for automatic setting */
+   language_c, 			/* C */
+   language_cplus, 		/* C++ */
+   language_java,		/* Java */
+   language_chill,		/* Chill */
+   language_fortran,		/* Fortran */
+   language_m2,			/* Modula-2 */
+   language_asm,		/* Assembly language */
+   language_scm			/* Scheme / Guile */
+};
+
+enum precision_type
+{
+  single_precision,
+  double_precision,
+  unspecified_precision
+};
+   
+/* the cleanup list records things that have to be undone
+   if an error happens (descriptors to be closed, memory to be freed, etc.)
+   Each link in the chain records a function to call and an
+   argument to give it.
+
+   Use make_cleanup to add an element to the cleanup chain.
+   Use do_cleanups to do all cleanup actions back to a given
+   point in the chain.  Use discard_cleanups to remove cleanups
+   from the chain back to a given point, not doing them.  */
+
+struct cleanup
+{
+  struct cleanup *next;
+  void (*function) PARAMS ((PTR));
+  PTR arg;
+};
+
+
+/* The ability to declare that a function never returns is useful, but
+   not really required to compile GDB successfully, so the NORETURN and
+   ATTR_NORETURN macros normally expand into nothing.  */
+
+/* If compiling with older versions of GCC, a function may be declared
+   "volatile" to indicate that it does not return.  */
+
+#ifndef NORETURN
+# if defined(__GNUC__) \
+     && (__GNUC__ == 1 || (__GNUC__ == 2 && __GNUC_MINOR__ < 7))
+#  define NORETURN volatile
+# else
+#  define NORETURN /* nothing */
+# endif
+#endif
+
+/* GCC 2.5 and later versions define a function attribute "noreturn",
+   which is the preferred way to declare that a function never returns.
+   However GCC 2.7 appears to be the first version in which this fully
+   works everywhere we use it. */
+
+#ifndef ATTR_NORETURN
+# if defined(__GNUC__) && __GNUC__ >= 2 && __GNUC_MINOR__ >= 7
+#  define ATTR_NORETURN __attribute__ ((noreturn))
+# else
+#  define ATTR_NORETURN /* nothing */
+# endif
+#endif
+
+#ifndef ATTR_FORMAT
+# if defined(__GNUC__) && __GNUC__ >= 2 && __GNUC_MINOR__ >= 4 && defined (__ANSI_PROTOTYPES)
+#  define ATTR_FORMAT(type, x, y) __attribute__ ((format(type, x, y)))
+# else
+#  define ATTR_FORMAT(type, x, y) /* nothing */
+# endif
+#endif
+
+/* Needed for various prototypes */
+
+#ifdef __STDC__
+struct symtab;
+struct breakpoint;
+#endif
+
+/* From blockframe.c */
+
+extern int inside_entry_func PARAMS ((CORE_ADDR));
+
+extern int inside_entry_file PARAMS ((CORE_ADDR addr));
+
+extern int inside_main_func PARAMS ((CORE_ADDR pc));
+
+/* From ch-lang.c, for the moment. (FIXME) */
+
+extern char *chill_demangle PARAMS ((const char *));
+
+/* From utils.c */
+
+extern void notice_quit PARAMS ((void));
+
+extern int strcmp_iw PARAMS ((const char *, const char *));
+
+extern char *safe_strerror PARAMS ((int));
+
+extern char *safe_strsignal PARAMS ((int));
+
+extern void init_malloc PARAMS ((void *));
+
+extern void request_quit PARAMS ((int));
+
+extern void do_cleanups PARAMS ((struct cleanup *));
+extern void do_final_cleanups PARAMS ((struct cleanup *));
+extern void do_my_cleanups PARAMS ((struct cleanup **, struct cleanup *));
+extern void do_run_cleanups PARAMS ((struct cleanup *));
+
+extern void discard_cleanups PARAMS ((struct cleanup *));
+extern void discard_final_cleanups PARAMS ((struct cleanup *));
+extern void discard_my_cleanups PARAMS ((struct cleanup **, struct cleanup *));
+
+typedef void (*make_cleanup_func) PARAMS ((void *));
+
+extern struct cleanup *make_cleanup PARAMS ((make_cleanup_func, void *));
+
+extern struct cleanup *make_final_cleanup PARAMS ((make_cleanup_func, void *));
+
+extern struct cleanup *make_my_cleanup PARAMS ((struct cleanup **, 
+                                                make_cleanup_func, void *));
+
+extern struct cleanup *make_run_cleanup PARAMS ((make_cleanup_func, void *));
+
+extern struct cleanup *save_cleanups PARAMS ((void));
+extern struct cleanup *save_final_cleanups PARAMS ((void));
+extern struct cleanup *save_my_cleanups PARAMS ((struct cleanup **));
+
+extern void restore_cleanups PARAMS ((struct cleanup *));
+extern void restore_final_cleanups PARAMS ((struct cleanup *));
+extern void restore_my_cleanups PARAMS ((struct cleanup **, struct cleanup *));
+
+extern void free_current_contents PARAMS ((char **));
+
+extern void null_cleanup PARAMS ((PTR));
+
+extern int myread PARAMS ((int, char *, int));
+
+extern int query PARAMS((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+#if !defined (USE_MMALLOC)
+extern PTR mmalloc PARAMS ((PTR, size_t));
+extern PTR mrealloc PARAMS ((PTR, PTR, size_t));
+extern void mfree PARAMS ((PTR, PTR));
+#endif
+
+/* From demangle.c */
+
+extern void set_demangling_style PARAMS ((char *));
+
+/* From tm.h */
+
+struct type;
+typedef int (use_struct_convention_fn) PARAMS ((int gcc_p, struct type *value_type));
+extern use_struct_convention_fn generic_use_struct_convention;
+
+typedef unsigned char *(breakpoint_from_pc_fn) PARAMS ((CORE_ADDR *pcptr, int *lenptr));
+
+
+
+/* Annotation stuff.  */
+
+extern int annotation_level; /* in stack.c */
+
+extern void begin_line PARAMS ((void));
+
+extern void wrap_here PARAMS ((char *));
+
+extern void reinitialize_more_filter PARAMS ((void));
+
+/* new */
+enum streamtype
+{
+  afile,
+  astring
+};
+
+/* new */
+typedef struct tui_stream
+{
+  enum streamtype ts_streamtype;
+  FILE *ts_filestream;
+  char *ts_strbuf;
+  int ts_buflen;
+} GDB_FILE;
+
+extern GDB_FILE *gdb_stdout;
+extern GDB_FILE *gdb_stderr;
+
+#if 0
+typedef FILE GDB_FILE;
+#define gdb_stdout stdout
+#define gdb_stderr stderr
+#endif
+
+#if defined(TUI)
+#include "tui.h"
+#include "tuiCommand.h"
+#include "tuiData.h"
+#include "tuiIO.h"
+#include "tuiLayout.h"
+#include "tuiWin.h"
+#endif
+
+extern void gdb_fclose PARAMS ((GDB_FILE **));
+
+extern void gdb_flush PARAMS ((GDB_FILE *));
+
+extern GDB_FILE *gdb_fopen PARAMS ((char * name, char * mode));
+
+extern void fputs_filtered PARAMS ((const char *, GDB_FILE *));
+
+extern void fputs_unfiltered PARAMS ((const char *, GDB_FILE *));
+
+extern int fputc_filtered PARAMS ((int c, GDB_FILE *));
+
+extern int fputc_unfiltered PARAMS ((int c, GDB_FILE *));
+
+extern int putchar_unfiltered PARAMS ((int c));
+
+extern void puts_filtered PARAMS ((const char *));
+
+extern void puts_unfiltered PARAMS ((const char *));
+
+extern void puts_debug PARAMS ((char *prefix, char *string, char *suffix));
+
+extern void vprintf_filtered PARAMS ((const char *, va_list))
+     ATTR_FORMAT(printf, 1, 0);
+
+extern void vfprintf_filtered PARAMS ((GDB_FILE *, const char *, va_list))
+     ATTR_FORMAT(printf, 2, 0);
+
+extern void fprintf_filtered PARAMS ((GDB_FILE *, const char *, ...))
+     ATTR_FORMAT(printf, 2, 3);
+
+extern void fprintfi_filtered PARAMS ((int, GDB_FILE *, const char *, ...))
+     ATTR_FORMAT(printf, 3, 4);
+
+extern void printf_filtered PARAMS ((const char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+extern void printfi_filtered PARAMS ((int, const char *, ...))
+     ATTR_FORMAT(printf, 2, 3);
+
+extern void vprintf_unfiltered PARAMS ((const char *, va_list))
+     ATTR_FORMAT(printf, 1, 0);
+
+extern void vfprintf_unfiltered PARAMS ((GDB_FILE *, const char *, va_list))
+     ATTR_FORMAT(printf, 2, 0);
+
+extern void fprintf_unfiltered PARAMS ((GDB_FILE *, const char *, ...))
+     ATTR_FORMAT(printf, 2, 3);
+
+extern void printf_unfiltered PARAMS ((const char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+extern int gdb_file_isatty PARAMS ((GDB_FILE *));
+
+extern GDB_FILE *gdb_file_init_astring PARAMS ((int));
+
+extern void gdb_file_deallocate PARAMS ((GDB_FILE **));
+
+extern char *gdb_file_get_strbuf PARAMS ((GDB_FILE *));
+
+extern void gdb_file_adjust_strbuf PARAMS ((int, GDB_FILE *));
+
+extern void print_spaces PARAMS ((int, GDB_FILE *));
+
+extern void print_spaces_filtered PARAMS ((int, GDB_FILE *));
+
+extern char *n_spaces PARAMS ((int));
+
+extern void gdb_printchar PARAMS ((int, GDB_FILE *, int));
+
+extern void gdb_print_address PARAMS ((void *, GDB_FILE *));
+
+typedef bfd_vma t_addr;
+typedef bfd_vma t_reg;
+extern char* paddr PARAMS ((t_addr addr));
+
+extern char* preg PARAMS ((t_reg reg));
+
+extern char* paddr_nz PARAMS ((t_addr addr));
+
+extern char* preg_nz PARAMS ((t_reg reg));
+
+extern void fprintf_symbol_filtered PARAMS ((GDB_FILE *, char *,
+					     enum language, int));
+
+extern NORETURN void perror_with_name PARAMS ((char *)) ATTR_NORETURN;
+
+extern void print_sys_errmsg PARAMS ((char *, int));
+
+/* From regex.c or libc.  BSD 4.4 declares this with the argument type as
+   "const char *" in unistd.h, so we can't declare the argument
+   as "char *".  */
+
+extern char *re_comp PARAMS ((const char *));
+
+/* From symfile.c */
+
+extern void symbol_file_command PARAMS ((char *, int));
+
+/* From top.c */
+
+extern char *skip_quoted PARAMS ((char *));
+
+extern char *gdb_readline PARAMS ((char *));
+
+extern char *command_line_input PARAMS ((char *, int, char *));
+
+extern void print_prompt PARAMS ((void));
+
+extern int input_from_terminal_p PARAMS ((void));
+
+extern int info_verbose;
+
+/* From printcmd.c */
+
+extern void set_next_address PARAMS ((CORE_ADDR));
+
+extern void print_address_symbolic PARAMS ((CORE_ADDR, GDB_FILE *, int,
+					    char *));
+
+extern void print_address_numeric PARAMS ((CORE_ADDR, int, GDB_FILE *));
+
+extern void print_address PARAMS ((CORE_ADDR, GDB_FILE *));
+
+/* From source.c */
+
+extern int openp PARAMS ((char *, int, char *, int, int, char **));
+
+extern int source_full_path_of PARAMS ((char *, char **));
+
+extern void mod_path PARAMS ((char *, char **));
+
+extern void directory_command PARAMS ((char *, int));
+
+extern void init_source_path PARAMS ((void));
+
+extern char *symtab_to_filename PARAMS ((struct symtab *));
+
+/* From findvar.c */
+
+extern int read_relative_register_raw_bytes PARAMS ((int, char *));
+
+/* From readline (but not in any readline .h files).  */
+
+extern char *tilde_expand PARAMS ((char *));
+
+/* Control types for commands */
+
+enum misc_command_type
+{
+  ok_command,
+  end_command,
+  else_command,
+  nop_command
+};
+
+enum command_control_type
+{
+  simple_control,
+  break_control,
+  continue_control,
+  while_control,
+  if_control,
+  invalid_control
+};
+
+/* Structure for saved commands lines
+   (for breakpoints, defined commands, etc).  */
+
+struct command_line
+{
+  struct command_line *next;
+  char *line;
+  enum command_control_type control_type;
+  int body_count;
+  struct command_line **body_list;
+};
+
+extern struct command_line *read_command_lines PARAMS ((char *, int));
+
+extern void free_command_lines PARAMS ((struct command_line **));
+
+/* String containing the current directory (what getwd would return).  */
+
+extern char *current_directory;
+
+/* Default radixes for input and output.  Only some values supported.  */
+extern unsigned input_radix;
+extern unsigned output_radix;
+
+/* Possibilities for prettyprint parameters to routines which print
+   things.  Like enum language, this should be in value.h, but needs
+   to be here for the same reason.  FIXME:  If we can eliminate this
+   as an arg to LA_VAL_PRINT, then we can probably move it back to
+   value.h. */
+
+enum val_prettyprint
+{
+  Val_no_prettyprint = 0,
+  Val_prettyprint,
+  /* Use the default setting which the user has specified.  */
+  Val_pretty_default
+};
+
+
+/* Host machine definition.  This will be a symlink to one of the
+   xm-*.h files, built by the `configure' script.  */
+
+#include "xm.h"
+
+/* Native machine support.  This will be a symlink to one of the
+   nm-*.h files, built by the `configure' script.  */
+
+#include "nm.h"
+
+/* Target machine definition.  This will be a symlink to one of the
+   tm-*.h files, built by the `configure' script.  */
+
+#include "tm.h"
+
+/* If the xm.h file did not define the mode string used to open the
+   files, assume that binary files are opened the same way as text
+   files */
+#ifndef FOPEN_RB
+#include "fopen-same.h"
+#endif
+
+/* Microsoft C can't deal with const pointers */
+
+#ifdef _MSC_VER
+#define CONST_PTR
+#else
+#define CONST_PTR const
+#endif
+
+/*
+ * Allow things in gdb to be declared "volatile".  If compiling ANSI, it
+ * just works.  If compiling with gcc but non-ansi, redefine to __volatile__.
+ * If non-ansi, non-gcc, then eliminate "volatile" entirely, making those
+ * objects be read-write rather than read-only.
+ */
+
+#ifndef volatile
+#ifndef __STDC__
+# ifdef __GNUC__
+#  define volatile __volatile__
+# else
+#  define volatile /*nothing*/
+# endif /* GNUC */
+#endif /* STDC */
+#endif /* volatile */
+
+/* Defaults for system-wide constants (if not defined by xm.h, we fake it).
+   FIXME: Assumes 2's complement arithmetic */
+
+#if !defined (UINT_MAX)
+#define	UINT_MAX ((unsigned int)(~0))		/* 0xFFFFFFFF for 32-bits */
+#endif
+
+#if !defined (INT_MAX)
+#define	INT_MAX ((int)(UINT_MAX >> 1))		/* 0x7FFFFFFF for 32-bits */
+#endif
+
+#if !defined (INT_MIN)
+#define INT_MIN ((int)((int) ~0 ^ INT_MAX))	/* 0x80000000 for 32-bits */
+#endif
+
+#if !defined (ULONG_MAX)
+#define	ULONG_MAX ((unsigned long)(~0L))	/* 0xFFFFFFFF for 32-bits */
+#endif
+
+#if !defined (LONG_MAX)
+#define	LONG_MAX ((long)(ULONG_MAX >> 1))	/* 0x7FFFFFFF for 32-bits */
+#endif
+
+#ifndef LONGEST
+
+#ifdef BFD64
+
+/* This is to make sure that LONGEST is at least as big as CORE_ADDR.  */
+
+#define LONGEST BFD_HOST_64_BIT
+#define ULONGEST BFD_HOST_U_64_BIT
+
+#else /* No BFD64 */
+
+#  ifdef CC_HAS_LONG_LONG
+#    define LONGEST long long
+#    define ULONGEST unsigned long long
+#  else
+/* BFD_HOST_64_BIT is defined for some hosts that don't have long long
+   (e.g. i386-windows) so try it.  */
+#    ifdef BFD_HOST_64_BIT
+#      define LONGEST BFD_HOST_64_BIT
+#      define ULONGEST BFD_HOST_U_64_BIT
+#    else
+#      define LONGEST long
+#      define ULONGEST unsigned long
+#    endif
+#  endif
+
+#endif /* No BFD64 */
+
+#endif /* ! LONGEST */
+
+/* Convert a LONGEST to an int.  This is used in contexts (e.g. number of
+   arguments to a function, number in a value history, register number, etc.)
+   where the value must not be larger than can fit in an int.  */
+
+extern int longest_to_int PARAMS ((LONGEST));
+
+/* Assorted functions we can declare, now that const and volatile are 
+   defined.  */
+
+extern char *savestring PARAMS ((const char *, int));
+
+extern char *msavestring PARAMS ((void *, const char *, int));
+
+extern char *strsave PARAMS ((const char *));
+
+extern char *mstrsave PARAMS ((void *, const char *));
+
+#ifdef _MSC_VER /* FIXME; was long, but this causes compile errors in msvc if already defined */
+extern PTR xmmalloc PARAMS ((PTR, size_t));
+
+extern PTR xmrealloc PARAMS ((PTR, PTR, size_t));
+#else
+extern PTR xmmalloc PARAMS ((PTR, long));
+
+extern PTR xmrealloc PARAMS ((PTR, PTR, long));
+#endif
+
+extern int parse_escape PARAMS ((char **));
+
+/* compat - handle old targets that just define REGISTER_NAMES */
+#ifndef REGISTER_NAME
+extern char *gdb_register_names[];
+#define REGISTER_NAME(i) gdb_register_names[i]
+#endif
+
+/* Message to be printed before the error message, when an error occurs.  */
+
+extern char *error_pre_print;
+
+/* Message to be printed before the error message, when an error occurs.  */
+
+extern char *quit_pre_print;
+
+/* Message to be printed before the warning message, when a warning occurs.  */
+
+extern char *warning_pre_print;
+
+extern NORETURN void error PARAMS((const char *, ...)) ATTR_NORETURN;
+
+extern void error_begin PARAMS ((void));
+
+extern NORETURN void fatal PARAMS((char *, ...)) ATTR_NORETURN;
+
+extern NORETURN void nomem PARAMS ((long)) ATTR_NORETURN;
+
+/* Reasons for calling return_to_top_level.  */
+enum return_reason {
+  /* User interrupt.  */
+  RETURN_QUIT,
+
+  /* Any other error.  */
+  RETURN_ERROR
+};
+
+#define RETURN_MASK_QUIT (1 << (int)RETURN_QUIT)
+#define RETURN_MASK_ERROR (1 << (int)RETURN_ERROR)
+#define RETURN_MASK_ALL (RETURN_MASK_QUIT | RETURN_MASK_ERROR)
+typedef int return_mask;
+
+extern NORETURN void
+return_to_top_level PARAMS ((enum return_reason)) ATTR_NORETURN;
+
+typedef int (catch_errors_ftype) PARAMS ((PTR));
+extern int catch_errors PARAMS ((catch_errors_ftype *, PTR, char *, return_mask));
+
+extern void warning_begin PARAMS ((void));
+
+extern void warning PARAMS ((const char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+/* Global functions from other, non-gdb GNU thingies.
+   Libiberty thingies are no longer declared here.  We include libiberty.h
+   above, instead.  */
+
+#ifndef GETENV_PROVIDED
+extern char *getenv PARAMS ((const char *));
+#endif
+
+/* From other system libraries */
+
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+
+#ifdef HAVE_STDLIB_H
+#if defined(_MSC_VER) && !defined(__cplusplus)
+/* msvc defines these in stdlib.h for c code */
+#undef min
+#undef max
+#endif
+#include <stdlib.h>
+#endif
+#ifndef min
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#endif
+#ifndef max
+#define max(a, b) ((a) > (b) ? (a) : (b))
+#endif
+
+
+/* We take the address of fclose later, but some stdio's forget
+   to declare this.  We can't always declare it since there's
+   no way to declare the parameters without upsetting some compiler
+   somewhere. */
+
+#ifndef FCLOSE_PROVIDED
+extern int fclose PARAMS ((FILE *));
+#endif
+
+#ifndef atof
+extern double atof PARAMS ((const char *));	/* X3.159-1989  4.10.1.1 */
+#endif
+
+#ifndef MALLOC_INCOMPATIBLE
+
+#ifdef NEED_DECLARATION_MALLOC
+extern PTR malloc ();
+#endif
+
+#ifdef NEED_DECLARATION_REALLOC
+extern PTR realloc ();
+#endif
+
+#ifdef NEED_DECLARATION_FREE
+extern void free ();
+#endif
+
+#endif /* MALLOC_INCOMPATIBLE */
+
+/* Various possibilities for alloca.  */
+#ifndef alloca
+# ifdef __GNUC__
+#  define alloca __builtin_alloca
+# else /* Not GNU C */
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+
+/* We need to be careful not to declare this in a way which conflicts with
+   bison.  Bison never declares it as char *, but under various circumstances
+   (like __hpux) we need to use void *.  */
+#    if defined (__STDC__) || defined (__hpux)
+   extern void *alloca ();
+#    else /* Don't use void *.  */
+   extern char *alloca ();
+#    endif /* Don't use void *.  */
+#   endif /* Not _AIX */
+#  endif /* Not HAVE_ALLOCA_H */
+# endif /* Not GNU C */
+#endif /* alloca not defined */
+
+/* HOST_BYTE_ORDER must be defined to one of these.  */
+
+#ifdef HAVE_ENDIAN_H
+#include <endian.h>
+#endif
+
+#if !defined (BIG_ENDIAN)
+#define BIG_ENDIAN 4321
+#endif
+
+#if !defined (LITTLE_ENDIAN)
+#define LITTLE_ENDIAN 1234
+#endif
+
+/* Dynamic target-system-dependent parameters for GDB. */
+#include "gdbarch.h"
+
+/* Static target-system-dependent parameters for GDB. */
+
+/* Number of bits in a char or unsigned char for the target machine.
+   Just like CHAR_BIT in <limits.h> but describes the target machine.  */
+#if !defined (TARGET_CHAR_BIT)
+#define TARGET_CHAR_BIT 8
+#endif
+
+/* Number of bits in a short or unsigned short for the target machine. */
+#if !defined (TARGET_SHORT_BIT)
+#define TARGET_SHORT_BIT (2 * TARGET_CHAR_BIT)
+#endif
+
+/* Number of bits in an int or unsigned int for the target machine. */
+#if !defined (TARGET_INT_BIT)
+#define TARGET_INT_BIT (4 * TARGET_CHAR_BIT)
+#endif
+
+/* Number of bits in a long or unsigned long for the target machine. */
+#if !defined (TARGET_LONG_BIT)
+#define TARGET_LONG_BIT (4 * TARGET_CHAR_BIT)
+#endif
+
+/* Number of bits in a long long or unsigned long long for the target machine. */
+#if !defined (TARGET_LONG_LONG_BIT)
+#define TARGET_LONG_LONG_BIT (2 * TARGET_LONG_BIT)
+#endif
+
+/* Number of bits in a float for the target machine. */
+#if !defined (TARGET_FLOAT_BIT)
+#define TARGET_FLOAT_BIT (4 * TARGET_CHAR_BIT)
+#endif
+
+/* Number of bits in a double for the target machine. */
+#if !defined (TARGET_DOUBLE_BIT)
+#define TARGET_DOUBLE_BIT (8 * TARGET_CHAR_BIT)
+#endif
+
+/* Number of bits in a long double for the target machine.  */
+#if !defined (TARGET_LONG_DOUBLE_BIT)
+#define TARGET_LONG_DOUBLE_BIT (2 * TARGET_DOUBLE_BIT)
+#endif
+
+/* Number of bits in a pointer for the target machine */
+#if !defined (TARGET_PTR_BIT)
+#define TARGET_PTR_BIT TARGET_INT_BIT
+#endif
+
+/* If we picked up a copy of CHAR_BIT from a configuration file
+   (which may get it by including <limits.h>) then use it to set
+   the number of bits in a host char.  If not, use the same size
+   as the target. */
+
+#if defined (CHAR_BIT)
+#define HOST_CHAR_BIT CHAR_BIT
+#else
+#define HOST_CHAR_BIT TARGET_CHAR_BIT
+#endif
+
+/* The bit byte-order has to do just with numbering of bits in
+   debugging symbols and such.  Conceptually, it's quite separate
+   from byte/word byte order.  */
+
+#if !defined (BITS_BIG_ENDIAN)
+#define BITS_BIG_ENDIAN (TARGET_BYTE_ORDER == BIG_ENDIAN)
+#endif
+
+/* In findvar.c.  */
+
+extern LONGEST extract_signed_integer PARAMS ((void *, int));
+
+extern ULONGEST extract_unsigned_integer PARAMS ((void *, int));
+
+extern int extract_long_unsigned_integer PARAMS ((void *, int, LONGEST *));
+
+extern CORE_ADDR extract_address PARAMS ((void *, int));
+
+extern void store_signed_integer PARAMS ((PTR, int, LONGEST));
+
+extern void store_unsigned_integer PARAMS ((PTR, int, ULONGEST));
+
+extern void store_address PARAMS ((PTR, int, LONGEST));
+
+/* Setup definitions for host and target floating point formats.  We need to
+   consider the format for `float', `double', and `long double' for both target
+   and host.  We need to do this so that we know what kind of conversions need
+   to be done when converting target numbers to and from the hosts DOUBLEST
+   data type.  */
+
+/* This is used to indicate that we don't know the format of the floating point
+   number.  Typically, this is useful for native ports, where the actual format
+   is irrelevant, since no conversions will be taking place.  */
+
+extern const struct floatformat floatformat_unknown;
+
+#if HOST_BYTE_ORDER == BIG_ENDIAN
+#  ifndef HOST_FLOAT_FORMAT
+#    define HOST_FLOAT_FORMAT &floatformat_ieee_single_big
+#  endif
+#  ifndef HOST_DOUBLE_FORMAT
+#    define HOST_DOUBLE_FORMAT &floatformat_ieee_double_big
+#  endif
+#else				/* LITTLE_ENDIAN */
+#  ifndef HOST_FLOAT_FORMAT
+#    define HOST_FLOAT_FORMAT &floatformat_ieee_single_little
+#  endif
+#  ifndef HOST_DOUBLE_FORMAT
+#    define HOST_DOUBLE_FORMAT &floatformat_ieee_double_little
+#  endif
+#endif
+
+#ifndef HOST_LONG_DOUBLE_FORMAT
+#define HOST_LONG_DOUBLE_FORMAT &floatformat_unknown
+#endif
+
+#ifndef TARGET_FLOAT_FORMAT
+#define TARGET_FLOAT_FORMAT (TARGET_BYTE_ORDER == BIG_ENDIAN \
+			     ? &floatformat_ieee_single_big \
+			     : &floatformat_ieee_single_little)
+#endif
+#ifndef TARGET_DOUBLE_FORMAT
+#define TARGET_DOUBLE_FORMAT (TARGET_BYTE_ORDER == BIG_ENDIAN \
+			      ? &floatformat_ieee_double_big \
+			      : &floatformat_ieee_double_little)
+#endif
+
+#ifndef TARGET_LONG_DOUBLE_FORMAT
+#  define TARGET_LONG_DOUBLE_FORMAT &floatformat_unknown
+#endif
+
+/* Use `long double' if the host compiler supports it.  (Note that this is not
+   necessarily any longer than `double'.  On SunOS/gcc, it's the same as
+   double.)  This is necessary because GDB internally converts all floating
+   point values to the widest type supported by the host.
+
+   There are problems however, when the target `long double' is longer than the
+   host's `long double'.  In general, we'll probably reduce the precision of
+   any such values and print a warning.  */
+
+#ifdef HAVE_LONG_DOUBLE
+typedef long double DOUBLEST;
+#else
+typedef double DOUBLEST;
+#endif
+
+extern void floatformat_to_doublest PARAMS ((const struct floatformat *,
+					     char *, DOUBLEST *));
+extern void floatformat_from_doublest PARAMS ((const struct floatformat *,
+					       DOUBLEST *, char *));
+extern DOUBLEST extract_floating PARAMS ((void *, int));
+
+extern void store_floating PARAMS ((void *, int, DOUBLEST));
+
+/* On some machines there are bits in addresses which are not really
+   part of the address, but are used by the kernel, the hardware, etc.
+   for special purposes.  ADDR_BITS_REMOVE takes out any such bits
+   so we get a "real" address such as one would find in a symbol
+   table.  This is used only for addresses of instructions, and even then
+   I'm not sure it's used in all contexts.  It exists to deal with there
+   being a few stray bits in the PC which would mislead us, not as some sort
+   of generic thing to handle alignment or segmentation (it's possible it
+   should be in TARGET_READ_PC instead).  */
+#if !defined (ADDR_BITS_REMOVE)
+#define ADDR_BITS_REMOVE(addr) (addr)
+#endif /* No ADDR_BITS_REMOVE.  */
+
+/* From valops.c */
+
+extern CORE_ADDR push_bytes PARAMS ((CORE_ADDR, char *, int));
+
+extern CORE_ADDR push_word PARAMS ((CORE_ADDR, ULONGEST));
+
+/* Some parts of gdb might be considered optional, in the sense that they
+   are not essential for being able to build a working, usable debugger
+   for a specific environment.  For example, the maintenance commands
+   are there for the benefit of gdb maintainers.  As another example,
+   some environments really don't need gdb's that are able to read N
+   different object file formats.  In order to make it possible (but
+   not necessarily recommended) to build "stripped down" versions of
+   gdb, the following defines control selective compilation of those
+   parts of gdb which can be safely left out when necessary.  Note that
+   the default is to include everything. */
+
+#ifndef MAINTENANCE_CMDS
+#define MAINTENANCE_CMDS 1
+#endif
+
+#ifdef MAINTENANCE_CMDS
+extern int watchdog;
+#endif
+
+/* Hooks for alternate command interfaces.  */
+
+#ifdef __STDC__
+struct target_waitstatus;
+struct cmd_list_element;
+#endif
+
+extern void (*init_ui_hook) PARAMS ((char *argv0));
+extern void (*command_loop_hook) PARAMS ((void));
+extern void (*fputs_unfiltered_hook) PARAMS ((const char *linebuffer,
+					      GDB_FILE *stream));
+extern void (*print_frame_info_listing_hook) PARAMS ((struct symtab *s,
+						      int line, int stopline,
+						      int noerror));
+extern struct frame_info *parse_frame_specification PARAMS ((char *frame_exp));
+extern int  (*query_hook) PARAMS ((const char *, va_list));
+extern void (*warning_hook) PARAMS ((const char *, va_list));
+extern void (*flush_hook) PARAMS ((GDB_FILE *stream));
+extern void (*create_breakpoint_hook) PARAMS ((struct breakpoint *b));
+extern void (*delete_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+extern void (*modify_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+extern void (*target_output_hook) PARAMS ((char *));
+extern void (*interactive_hook) PARAMS ((void));
+extern void (*registers_changed_hook) PARAMS ((void));
+extern void (*readline_begin_hook) PARAMS ((char *, ...));
+extern char * (*readline_hook) PARAMS ((char *));
+extern void (*readline_end_hook) PARAMS ((void));
+extern void (*register_changed_hook) PARAMS ((int regno));
+extern void (*memory_changed_hook) PARAMS ((CORE_ADDR addr, int len));
+extern void (*context_hook) PARAMS ((int));
+extern int (*target_wait_hook) PARAMS ((int pid,
+					struct target_waitstatus *status));
+
+extern void (*call_command_hook) PARAMS ((struct cmd_list_element *c,
+					  char *cmd, int from_tty));
+
+extern NORETURN void (*error_hook) PARAMS ((void)) ATTR_NORETURN;
+
+extern void (*error_begin_hook) PARAMS ((void));
+
+
+/* Inhibit window interface if non-zero. */
+
+extern int use_windows;
+
+/* Symbolic definitions of filename-related things.  */
+/* FIXME, this doesn't work very well if host and executable
+   filesystems conventions are different.  */
+
+#ifndef DIRNAME_SEPARATOR
+#define DIRNAME_SEPARATOR ':'
+#endif
+
+#ifndef SLASH_P
+#if defined(__GO32__)||defined(_WIN32)
+#define SLASH_P(X) ((X)=='\\')
+#else
+#define SLASH_P(X) ((X)=='/')
+#endif
+#endif
+
+#ifndef SLASH_CHAR
+#if defined(__GO32__)||defined(_WIN32)
+#define SLASH_CHAR '\\'
+#else
+#define SLASH_CHAR '/'
+#endif
+#endif
+
+#ifndef SLASH_STRING
+#if defined(__GO32__)||defined(_WIN32)
+#define SLASH_STRING "\\"
+#else
+#define SLASH_STRING "/"
+#endif
+#endif
+
+#ifndef ROOTED_P
+#define ROOTED_P(X) (SLASH_P((X)[0]))
+#endif
+
+/* On some systems, PIDGET is defined to extract the inferior pid from
+   an internal pid that has the thread id and pid in seperate bit
+   fields.  If not defined, then just use the entire internal pid as
+   the actual pid. */
+
+#ifndef PIDGET
+#define PIDGET(pid) (pid)
+#endif
+
+/* If under Cygwin, provide backwards compatibility with older
+   Cygwin compilers that don't define the current cpp define. */
+#ifdef __CYGWIN32__
+#ifndef __CYGWIN__
+#define __CYGWIN__
+#endif
+#endif
+
+#endif /* #ifndef DEFS_H */
diff --git a/gdb/delta68-nat.c b/gdb/delta68-nat.c
new file mode 100644
index 0000000..3995b23
--- /dev/null
+++ b/gdb/delta68-nat.c
@@ -0,0 +1,91 @@
+/* Functions specific to running gdb native on a Motorola Delta Series sysV68.
+   Copyright (C) 1993, 1997-98, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <sys/signal.h>	/* for MAXSIG in sys/user.h */
+#include <sys/types.h>	/* for ushort in sys/dir.h */
+#include <sys/dir.h>	/* for struct direct in sys/user.h */
+#include <sys/user.h>
+
+#include <nlist.h>
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* Return the address in the core dump or inferior of register REGNO.
+   BLOCKEND is the address of the end of the user structure.  */
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int	regno;
+     CORE_ADDR	blockend;
+{
+  static int	sysv68reg[] =
+    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, -1, 15, 16 };
+
+  if (regno >= 0 && regno < sizeof(sysv68reg) / sizeof(sysv68reg[0]))
+    return blockend + sysv68reg[regno] * 4; 
+  else if (regno < FPC_REGNUM)
+    return offsetof (struct user, u_fpu.regs.reg[regno - FP0_REGNUM][0]);
+  else if (regno == FPC_REGNUM)
+    return offsetof (struct user, u_fpu.regs.control);
+  else if (regno == FPS_REGNUM)
+    return offsetof (struct user, u_fpu.regs.status);
+  else if (regno == FPI_REGNUM)
+    return offsetof (struct user, u_fpu.regs.iaddr);
+  else
+    {
+      fprintf_unfiltered (gdb_stderr, "\
+Internal error: invalid register number %d in REGISTER_U_ADDR\n",
+	       regno);
+      return blockend;
+    }
+}
+
+CORE_ADDR kernel_u_addr;
+
+/* Read the value of the u area from the kernel.  */
+void
+_initialize_delta68_nat ()
+{
+  struct nlist nl[2];
+
+  nl[0].n_name = "u";
+  nl[1].n_name = NULL;
+  if (nlist ("/sysV68", nl) == 0 && nl[0].n_scnum != 0)
+    kernel_u_addr = nl[0].n_value;
+  else
+    {
+      perror ("Cannot get kernel u area address");
+      exit (1);
+    }
+}
+
+clear_insn_cache ()
+{
+#ifdef MCT_TEXT /* in sys/signal.h on sysV68 R3V7.1 */
+  memctl(0, 4096, MCT_TEXT);
+#endif
+}
+
+kernel_u_size ()
+{
+  return sizeof (struct user);
+}
diff --git a/gdb/demangle.c b/gdb/demangle.c
new file mode 100644
index 0000000..669d9ab
--- /dev/null
+++ b/gdb/demangle.c
@@ -0,0 +1,237 @@
+/* Basic C++ demangling support for GDB.
+   Copyright 1991, 1992, 1996, 1999 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/*  This file contains support code for C++ demangling that is common
+   to a styles of demangling, and GDB specific. */
+
+#include "defs.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "demangle.h"
+#include "gdb_string.h"
+
+/* Select the default C++ demangling style to use.  The default is "auto",
+   which allows gdb to attempt to pick an appropriate demangling style for
+   the executable it has loaded.  It can be set to a specific style ("gnu",
+   "lucid", "arm", "hp", etc.) in which case gdb will never attempt to do auto
+   selection of the style unless you do an explicit "set demangle auto".
+   To select one of these as the default, set DEFAULT_DEMANGLING_STYLE in
+   the appropriate target configuration file. */
+
+#ifndef DEFAULT_DEMANGLING_STYLE
+#define DEFAULT_DEMANGLING_STYLE AUTO_DEMANGLING_STYLE_STRING
+#endif
+
+/* String name for the current demangling style.  Set by the
+   "set demangle-style" command, printed as part of the output by the
+   "show demangle-style" command. */
+
+static char *current_demangling_style_string;
+
+/* List of supported demangling styles.  Contains the name of the style as
+   seen by the user, and the enum value that corresponds to that style. */
+
+static const struct demangler
+  {
+    char *demangling_style_name;
+    enum demangling_styles demangling_style;
+    char *demangling_style_doc;
+  }
+demanglers[] =
+{
+  {
+    AUTO_DEMANGLING_STYLE_STRING,
+      auto_demangling,
+      "Automatic selection based on executable"
+  }
+  ,
+  {
+    GNU_DEMANGLING_STYLE_STRING,
+      gnu_demangling,
+      "GNU (g++) style demangling"
+  }
+  ,
+  {
+    LUCID_DEMANGLING_STYLE_STRING,
+      lucid_demangling,
+      "Lucid (lcc) style demangling"
+  }
+  ,
+  {
+    ARM_DEMANGLING_STYLE_STRING,
+      arm_demangling,
+      "ARM style demangling"
+  }
+  ,
+  {
+    HP_DEMANGLING_STYLE_STRING,
+      hp_demangling,
+      "HP (aCC) style demangling"
+  }
+  ,
+  {
+    EDG_DEMANGLING_STYLE_STRING,
+      edg_demangling,
+      "EDG style demangling"
+  }
+  ,
+  {
+    NULL, unknown_demangling, NULL
+  }
+};
+
+static void
+set_demangling_command PARAMS ((char *, int, struct cmd_list_element *));
+
+/* Set current demangling style.  Called by the "set demangle-style"
+   command after it has updated the current_demangling_style_string to
+   match what the user has entered.
+
+   If the user has entered a string that matches a known demangling style
+   name in the demanglers[] array then just leave the string alone and update
+   the current_demangling_style enum value to match.
+
+   If the user has entered a string that doesn't match, including an empty
+   string, then print a list of the currently known styles and restore
+   the current_demangling_style_string to match the current_demangling_style
+   enum value.
+
+   Note:  Assumes that current_demangling_style_string always points to
+   a malloc'd string, even if it is a null-string. */
+
+static void
+set_demangling_command (ignore, from_tty, c)
+     char *ignore;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  const struct demangler *dem;
+
+  /*  First just try to match whatever style name the user supplied with
+     one of the known ones.  Don't bother special casing for an empty
+     name, we just treat it as any other style name that doesn't match.
+     If we match, update the current demangling style enum. */
+
+  for (dem = demanglers; dem->demangling_style_name != NULL; dem++)
+    {
+      if (STREQ (current_demangling_style_string,
+		 dem->demangling_style_name))
+	{
+	  current_demangling_style = dem->demangling_style;
+	  break;
+	}
+    }
+
+  /* Check to see if we found a match.  If not, gripe about any non-empty
+     style name and supply a list of valid ones.  FIXME:  This should
+     probably be done with some sort of completion and with help. */
+
+  if (dem->demangling_style_name == NULL)
+    {
+      if (*current_demangling_style_string != '\0')
+	{
+	  printf_unfiltered ("Unknown demangling style `%s'.\n",
+			     current_demangling_style_string);
+	}
+      printf_unfiltered ("The currently understood settings are:\n\n");
+      for (dem = demanglers; dem->demangling_style_name != NULL; dem++)
+	{
+	  printf_unfiltered ("%-10s %s\n", dem->demangling_style_name,
+			     dem->demangling_style_doc);
+	  if (dem->demangling_style == current_demangling_style)
+	    {
+	      free (current_demangling_style_string);
+	      current_demangling_style_string =
+		savestring (dem->demangling_style_name,
+			    strlen (dem->demangling_style_name));
+	    }
+	}
+      if (current_demangling_style == unknown_demangling)
+	{
+	  /* This can happen during initialization if gdb is compiled with
+	     a DEMANGLING_STYLE value that is unknown, so pick the first
+	     one as the default. */
+	  current_demangling_style = demanglers[0].demangling_style;
+	  current_demangling_style_string =
+	    savestring (demanglers[0].demangling_style_name,
+			strlen (demanglers[0].demangling_style_name));
+	  warning ("`%s' style demangling chosen as the default.\n",
+		   current_demangling_style_string);
+	}
+    }
+}
+
+/* Fake a "set demangle-style" command. */
+
+void
+set_demangling_style (style)
+     char *style;
+{
+  if (current_demangling_style_string != NULL)
+    {
+      free (current_demangling_style_string);
+    }
+  current_demangling_style_string = savestring (style, strlen (style));
+  set_demangling_command ((char *) NULL, 0, (struct cmd_list_element *) NULL);
+}
+
+/* In order to allow a single demangler executable to demangle strings
+   using various common values of CPLUS_MARKER, as well as any specific
+   one set at compile time, we maintain a string containing all the
+   commonly used ones, and check to see if the marker we are looking for
+   is in that string.  CPLUS_MARKER is usually '$' on systems where the
+   assembler can deal with that.  Where the assembler can't, it's usually
+   '.' (but on many systems '.' is used for other things).  We put the
+   current defined CPLUS_MARKER first (which defaults to '$'), followed
+   by the next most common value, followed by an explicit '$' in case
+   the value of CPLUS_MARKER is not '$'.
+
+   We could avoid this if we could just get g++ to tell us what the actual
+   cplus marker character is as part of the debug information, perhaps by
+   ensuring that it is the character that terminates the gcc<n>_compiled
+   marker symbol (FIXME). */
+
+static char cplus_markers[] = {CPLUS_MARKER, '.', '$', '\0'};
+
+int
+is_cplus_marker (c)
+     int c;
+{
+  return c && strchr (cplus_markers, c) != NULL;
+}
+
+void
+_initialize_demangler ()
+{
+  struct cmd_list_element *set, *show;
+
+  set = add_set_cmd ("demangle-style", class_support, var_string_noescape,
+		     (char *) &current_demangling_style_string,
+		     "Set the current C++ demangling style.\n\
+Use `set demangle-style' without arguments for a list of demangling styles.",
+		     &setlist);
+  show = add_show_from_set (set, &showlist);
+  set->function.sfunc = set_demangling_command;
+
+  /* Set the default demangling style chosen at compilation time. */
+  set_demangling_style (DEFAULT_DEMANGLING_STYLE);
+  set_cplus_marker_for_demangling (CPLUS_MARKER);
+}
diff --git a/gdb/dink32-rom.c b/gdb/dink32-rom.c
new file mode 100644
index 0000000..c0c2e51
--- /dev/null
+++ b/gdb/dink32-rom.c
@@ -0,0 +1,198 @@
+/* Remote debugging interface for DINK32 (PowerPC) ROM monitor for
+   GDB, the GNU debugger.
+   Copyright 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void dink32_open PARAMS ((char *args, int from_tty));
+
+static void
+dink32_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno = 0, base = 0;
+
+  if (regnamelen < 2 || regnamelen > 4)
+    return;
+
+  switch (regname[0])
+    {
+    case 'R':
+      if (regname[1] < '0' || regname[1] > '9')
+	return;
+      if (regnamelen == 2)
+	regno = regname[1] - '0';
+      else if (regnamelen == 3 && regname[2] >= '0' && regname[2] <= '9')
+	regno = (regname[1] - '0') * 10 + (regname[2] - '0');
+      else
+	return;
+      break;
+    case 'F':
+      if (regname[1] != 'R' || regname[2] < '0' || regname[2] > '9')
+	return;
+      if (regnamelen == 3)
+	regno = 32 + regname[2] - '0';
+      else if (regnamelen == 4 && regname[3] >= '0' && regname[3] <= '9')
+	regno = 32 + (regname[2] - '0') * 10 + (regname[3] - '0');
+      else
+	return;
+      break;
+    case 'I':
+      if (regnamelen != 2 || regname[1] != 'P')
+	return;
+      regno = 64;
+      break;
+    case 'M':
+      if (regnamelen != 3 || regname[1] != 'S' || regname[2] != 'R')
+	return;
+      regno = 65;
+      break;
+    case 'C':
+      if (regnamelen != 2 || regname[1] != 'R')
+	return;
+      regno = 66;
+      break;
+    case 'S':
+      if (regnamelen != 4 || regname[1] != 'P' || regname[2] != 'R')
+	return;
+      else if (regname[3] == '8')
+	regno = 67;
+      else if (regname[3] == '9')
+	regno = 68;
+      else if (regname[3] == '1')
+	regno = 69;
+      else if (regname[3] == '0')
+	regno = 70;
+      else
+	return;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+static void
+dink32_load (monops, filename, from_tty)
+     struct monitor_ops *monops;
+     char *filename;
+     int from_tty;
+{
+  extern int inferior_pid;
+
+  generic_load (filename, from_tty);
+
+  /* Finally, make the PC point at the start address */
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;             /* No process now */
+}
+
+
+/* This array of registers needs to match the indexes used by GDB. The
+   whole reason this exists is because the various ROM monitors use
+   different names than GDB does, and don't support all the registers
+   either.  */
+
+static char *dink32_regnames[NUM_REGS] =
+{
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "r16",  "r17",  "r18",  "r19",  "r20",  "r21",  "r22",  "r23",
+  "r24",  "r25",  "r26",  "r27",  "r28",  "r29",  "r30",  "r31",
+
+  "f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7",
+  "f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15",
+  "f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",
+  "f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",
+
+  "srr0", "msr",  "cr",   "lr",   "ctr",  "xer",  "xer"
+};
+
+static struct target_ops dink32_ops;
+
+static char *dink32_inits[] = {"\r", NULL};
+
+static struct monitor_ops dink32_cmds;
+
+static void
+dink32_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &dink32_cmds, from_tty);
+}
+
+void
+_initialize_dink32_rom ()
+{
+  dink32_cmds.flags = MO_HEX_PREFIX | MO_GETMEM_NEEDS_RANGE | MO_FILL_USES_ADDR | MO_HANDLE_NL | MO_32_REGS_PAIRED | MO_SETREG_INTERACTIVE | MO_SETMEM_INTERACTIVE | MO_GETMEM_16_BOUNDARY | MO_CLR_BREAK_1_BASED | MO_SREC_ACK | MO_SREC_ACK_ROTATE;
+  dink32_cmds.init = dink32_inits;
+  dink32_cmds.cont = "go +\r";
+  dink32_cmds.step = "tr +\r";
+  dink32_cmds.set_break = "bp 0x%x\r";
+  dink32_cmds.clr_break = "bp %d\r";
+#if 0 /* Would need to follow strict alignment rules.. */
+  dink32_cmds.fill = "mf %x %x %x\r";
+#endif
+  dink32_cmds.setmem.cmdb = "mm -b %x\r";
+  dink32_cmds.setmem.cmdw = "mm -w %x\r";
+  dink32_cmds.setmem.cmdl = "mm %x\r";
+  dink32_cmds.setmem.term = " ?  ";
+  dink32_cmds.getmem.cmdb = "md %x\r";
+  dink32_cmds.getmem.resp_delim = "        ";
+  dink32_cmds.setreg.cmd = "rm %s\r";
+  dink32_cmds.setreg.term = " ?  ";
+  dink32_cmds.getreg.cmd = "rd %s\r";
+  dink32_cmds.getreg.resp_delim = ": ";
+  dink32_cmds.dump_registers = "rd r\r";
+  dink32_cmds.register_pattern = "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)";
+  dink32_cmds.supply_register = dink32_supply_register;
+  /* S-record download, via "keyboard port".  */
+  dink32_cmds.load = "dl -k\r";
+  dink32_cmds.loadresp = "Set Input Port : set to Keyboard Port\r";
+#if 0 /* slow load routine not needed if S-records work... */
+  dink32_cmds.load_routine = dink32_load;
+#endif
+  dink32_cmds.prompt = "DINK32_603 >>";
+  dink32_cmds.line_term = "\r";
+  dink32_cmds.target = &dink32_ops;
+  dink32_cmds.stopbits = SERIAL_1_STOPBITS;
+  dink32_cmds.regnames = dink32_regnames;
+  dink32_cmds.magic = MONITOR_OPS_MAGIC;
+
+  init_monitor_ops (&dink32_ops);
+
+  dink32_ops.to_shortname = "dink32";
+  dink32_ops.to_longname = "DINK32 monitor";
+  dink32_ops.to_doc = "Debug using the DINK32 monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  dink32_ops.to_open = dink32_open;
+
+  add_target (&dink32_ops);
+}
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
new file mode 100644
index 0000000..1e03a80
--- /dev/null
+++ b/gdb/doc/ChangeLog
@@ -0,0 +1,1473 @@
+Thu Feb 11 18:00:59 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo: Update the credits.
+
+Mon Feb  8 17:33:57 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo: Fix mistakes noticed in printout of last
+	draft, add Alpha to discussion of heuristic fence post.
+
+Fri Feb  5 17:20:00 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo, remote.texi: Many changes; update to Seventh
+ 	Edition, merge some HP changes into mainline, describe some
+ 	previously undocumented features, describe more of the target
+ 	commands available, eliminate obsolete section on renamed
+ 	commands.
+	* all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.
+
+Wed Jan 20 17:47:45 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo: Make many HPPA conditionals unconditional,
+	including catchpoint description, since now on for all configs.
+	* all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
+	specializations.
+
+Thu Jan 14 17:10:12 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* Makefile.in (GDBvn.texi): Fix match expression to work with
+	current format of VERSION in gdb/Makefile.in.
+	* gdb.texinfo: Fix node ref to match new readline.
+
+Wed Jan 13 10:38:40 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+	* gdb.texinfo: Changes made as part of a project to merge in 
+	  changes made by HP. Documentation makes extensive use of 
+	  @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
+	  on remote debugging. There are differences in documentation
+ 	  (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
+	  the HP manual discusses catchpoints, hardware watchpoints, and
+	  some HPUX specific limitations for shared library support.
+	  
+	  There are also a number of @node changes.
+
+1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gdbint.texinfo (Formatting): Disambiguate a sentence.
+	(C Usage): Same.
+
+Wed Jan  6 11:55:34 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Edith Epstein
+ 	<eepstein@cygnus.com> as part of a project to merge in changes
+ 	made by HP.
+	
+	* HPPA-cfg.texi: new file.
+
+	* all-cfg.texi: set HPPA for HP PA-RISC targets.
+
+	* refcard.tex: change documentation about catch.
+	  removed info catch.
+
+Mon Jan  4 18:29:18 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdbint.texinfo: Expand on GDB's coding standards,
+	specify the use of arg names with prototypes.
+
+1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* gdb.texinfo: Fix tipo.
+
+Sun Dec 13 10:27:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
+ 	TARGET_BYTE_ORDER_SELECTABLE_P.
+
+Thu Dec 10 16:07:09 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.
+
+1998-12-09  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* agentexpr.texi: New file.
+
+Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.
+
+1998-12-03  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* remote.texi: Changed wording that implied that the GDB remote
+	protocol caches register values instead of GDB itself.
+
+Tue Dec  1 17:45:43 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdbint.texinfo: Add some info about symbol readers.
+	(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
+	(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
+	(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
+	(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
+
+Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE): 
+
+Sat Nov 28 13:45:53 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbint.texinfo (INNER_THAN): Update, now takes parameters.
+
+Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbint.texinfo (NO_SINGLE_STEP): Replace with
+ 	SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.
+
+Wed Oct 14 10:02:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbint.texinfo: Fix minor typos.
+
+Wed Sep 30 18:03:19 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdbint.texinfo: Complete overhaul.  Group descriptions more
+	logically, add more info on generic algorithms, remove much
+	obsolete and/or wrong material.
+
+Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* stabs.texinfo (Method Type Descriptor): Expand and correct.
+
+Mon May  4 10:37:12 1998  Brian Youmans (3diff@gnu.org)
+
+	* refcard.tex:  Copyright, address updates.
+
+Tue Apr 21 18:09:56 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo (EDITION, DATE): Update and change to use ordinals
+	for the edition instead of confusing GDB-version-like numbers.
+
+Mon Apr 13 14:05:00 1998  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".
+
+Thu Apr  2 16:52:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * LRS: Reformat a bit to keep text under 80 columns.
+
+Thu Apr  2 16:10:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo: Add some credits, mention bug monitor.
+	* remote.texi: Mention mips monitor targets.
+	* gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
+	
+Mon Feb  2 17:13:03 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
+ 	files, finish sorting of host vs target vs native macros, describe
+ 	some more of them.
+
+Tue Jan 13 16:44:50 1998  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (Host Conditionals): Document change from
+	using NO_MMALLOC to it's inverse, USE_MMALLOC.
+
+Mon Nov 24 13:55:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbint.texinfo (Host Conditionals): Document
+ 	PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.
+
+Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
+	Document LSEEK_NOT_LINEAR.
+
+Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* stabs.texinfo (Stab Section Basics): Make it clear that only
+	some versions of the GNU linker remove the leading N_UNDF symbol.
+
+Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <ian@cygnus.com>
+
+	* stabs.texinfo (String Field): Document type number pairs here,
+	instead of in the Sun specific section.
+	(Include Files): The GNU linker supports the N_BINCL
+	optimization.  Clarify the N_BINCL value, and what it is used
+	for.
+	(Procedures): Document N_FUN with an empty string to mark the end
+	of a function.
+	(Typedefs): Mention that Sun compilers may use N_GSYM for a type.
+	(Sun Differences): Remove this node, as the information is now
+	elsewhere in the main document.
+	(Stab Section Basics): Mention that the GNU linker may optimize
+	stabs and remove the leading N_UNDF symbol.
+
+Mon Dec  9 12:23:32 1996  Roland Pesch  <roland@wrs.com>
+
+	* gdb.texinfo, refcard.tex: Restore author credit
+
+Wed Oct  2 22:01:36 1996  Fred Fish  <fnf@fishfood.ninemoons.com>
+
+	* gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
+	documentation to account for START and END macros taking
+	one arg.
+
+Thu Aug 22 17:59:03 1996  Fred Fish  <fnf@cygnus.com>
+
+	From: Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
+	* gdb.texinfo (Frames): Fix typo.
+
+Tue Jul 23 10:06:20 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
+	a target_signal as arg type, not a pid.
+
+Fri Jul 12 11:10:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* gdb.texinfo:  Document `set assembly-language'.
+
+Thu Jul 11 13:50:28 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.texi: Update list of stubs in the GDB distribution.
+
+Fri Jul  5 15:38:54 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
+  	Also document that some systems can use mmalloc but must define
+ 	this if their C runtime allocates memory that is later freed.
+	(MMCHECK_FORCE): Document new macro.
+	
+Fri Jun 28 22:17:10 1996  Dawn Perchik  <dawn@cygnus.com>
+
+	* remote.texi: Add documentation for target Sparclet.
+
+Mon Jun 24 18:12:22 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
+
+	* Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL, 
+	INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
+	* configure.in: Rewritten for autoconf.
+	* configure: New.
+
+Mon Jun 17 10:43:41 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (DVIPS): New define, set to dvips.
+	(dvi): Add stabs.dvi.
+	(ps): New target.
+	(all-doc): Depend on info, dvi, and ps targets.
+	(STAGESTUFF): Add *.ps and *.dvi files.
+	(clean-info, clean-dvi): Remove.
+	(mostlyclean): Does not depend upon clean-info or clean-dvi,
+	rules completely rewritten.
+	(maintainer-clean): Remove clean-info and clean-dvi
+	dependencies and put their actions in the rules.
+	(gdb.ps): New target
+	(gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove 
+	intermediate TeX files, whether they have 2 or 3 character
+	extensions.
+	(gdbint.ps): Add target and rules.
+	(gdb-internals): Delete unused target.
+	(Makefile): Depends upon config.status also.
+
+Sat Mar 30 15:46:58 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
+	set.
+
+Sat Mar 16 15:10:20 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* gdb.texinfo (Expressions): Fix erroneous array constant example.
+
+Sat Mar 16 13:28:45 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.
+
+Sat Feb 10 03:28:36 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.texinfo (Print settings):  Document
+	`set/show print static-members' commands.
+
+Wed Jan 10 14:16:37 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (Native): Document name change, coredep.c to
+	core-aout.c.
+
+Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* stabs.texinfo (Include Files): Document the values the SunOS4
+	linker creates for N_BINCL/N_EINCL/N_EXCL stabs.
+
+Fri Dec  8 21:08:44 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
+	Fix typo.
+
+Fri Dec  1 11:07:50 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
+	"gdb.tar.Z".
+
+Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (maintainer-clean): New target, synonym for
+	realclean.
+
+Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Update all FSF addresses except those in COPYING* files.
+
+Wed Jul 19 18:43:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Richard Earnshaw (rearnsha@armltd.co.uk):
+	* gdb.texinfo (convenience variables): Document $_exitcode.
+	(quit): Document optional expression to use as exit code.
+
+Thu Jun 22 21:27:33 1995  Victoria Mixon  <victoria@cygnus.com>
+
+	* gdb.texinfo, remote.texi: Brought up to date with various
+	GDB changes.
+
+Tue Jun 20 14:35:38 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.texinfo: Update dates and versions, fix comments about
+	hardware watchpoints in future releases and about the
+	sharedlibrary command.
+
+Mon May  8 09:30:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
+	C_FUN stab.  Other cleanups.
+
+Wed Apr 19 07:02:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.texi (Bootstrapping): Clarify that flush_i_cache is only
+	for the sparc stub.
+
+Tue Apr 11 11:41:49 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* annotate.texi: Clarify which addresses have differing formats
+	depending on the language and which do not.
+
+Tue Mar 28 16:56:22 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* remote.texi (NetWare): Changed example to use BOARD= instead of
+	  NODE= argument to reflect correspoding change to gdbserve.nlm.
+
+Fri Mar 17 06:47:02 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Mention the fact that
+	GDB, as well as AIX dbx, supports the size type attribute.
+
+Thu Mar 16 12:11:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Document types -31 to -34.
+
+Mon Mar 13 16:49:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdb.texinfo (Define):  Document $arg0... arguments to commands,
+	and new 'if' and 'while' commands.
+
+Fri Feb 17 15:24:35 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.
+
+Wed Feb 15 11:59:18 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
+	* remote.texi (NetWare): New node, how to use gdbserve.nlm on
+	  NetWare targets.  Mostly stolen from the Server node.
+
+Fri Feb 10 20:20:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Setting): Talk about the language of a source file
+	versus the working language.  The old documentation did not match
+	what GDB did.
+
+Wed Feb  1 20:26:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Source Files): Document N_SO used to mark the end
+	of a source file.
+
+Mon Jan 23 14:23:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Processes): New node.
+
+Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* remote.texi: Update documentation of set/show mipsfpu.
+
+
+Sun Sep  4 16:47:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbint.texinfo: Removed mentions of some incorrectly placed and
+	obsolete conditionals, described some others.
+
+Mon Aug  1 15:42:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
+	SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.
+
+Mon Aug  1 15:12:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbint.texinfo: Put regex conditionals in their own table.
+
+Tue Jul 26 18:32:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbint.texinfo: Removed mentions of many obsolete conditionals,
+	described or fixed the descriptions of many others.
+
+Sun Jul 17 14:14:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.texinfo: Add some more credits.
+	* gdbint.texinfo: Capitalize GDB consistently, describe some
+	macros and remove some.
+
+Thu Jul 14 18:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbint.texinfo: Removed mentions of many incorrectly placed and
+	obsolete conditionals, described some others.
+
+Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.texinfo (help targets):  Changed to `help target', which
+	is the correct gdb command.
+
+Wed Jun 22 18:00:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* annotate.texi (TODO): New node, for keeping track of annotations
+	suggested but not yet implemented.
+
+Wed Jun  1 16:10:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
+	another symbol, it is not the address itself.
+
+Thu May  5 20:23:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* stabs.texinfo (Stab Section Basics): Add comment about alignment
+	of stabs-in-coff sections.
+
+Wed May  4 06:26:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* annotate.texi: Change edition to 0.5 and date to May 1994.
+	Add index.
+	(Frames): New node, for frame annotation.
+	(Displays): New node, for display annotation.
+
+	* remote.texi (MIPS Remote): Say that set timeout doesn't apply
+	when waiting for your program to stop.
+
+Fri Apr 29 18:24:46 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* annotate.texi (Breakpoint Info): Document annotation of header
+	fields and record annotation.
+
+Thu Apr 28 07:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* annotate.texi: New file, to document annotations.
+
+Thu Apr 21 14:20:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
+	16 I meant to make this change but did not).  Do remove gdb-cfg.texi.
+
+Wed Apr 20 11:22:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stab Section Basics): Say what is in .stab
+	section, and say n_strx field is compilation unit relative.
+	* stabs.texinfo: Don't use @code for a.out when it is the name of
+	an object file format.
+
+Wed Apr 13 20:29:54 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.texinfo: Refer to file names, not path names, per rms
+	convention.
+	(Arguments): Fix typo.
+
+Thu Mar 24 08:09:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Global Variables): Talk about stabs in files
+	where variables are referenced, but not defined.
+
+Wed Mar 23 07:16:36 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Move stuff on @ and # type descriptors from node
+	Cplusplus to new nodes Member Type Descriptor and Method Type
+	Descriptor.  Re-write stuff for #.
+
+Wed Mar 16 08:20:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Print Settings): Don't document "set print
+	fast-symbolic-addr off".  The bug which it worked around was fixed
+	on 25 Feb 94 in coffread.c, so I'm nuking the command.
+
+	* stabs.texinfo (Alternate Entry Points): New node, rewritten from
+	N_ENTRY node.
+
+	* stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.
+
+Tue Mar 15 08:43:02 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
+	references to ieee-float.c.
+
+Fri Mar 11 08:09:40 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Set Breaks): Update documentation for tbreak to
+	match what the code actually does.
+
+Wed Mar  9 19:43:05 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.
+
+Tue Mar  1 17:04:43 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
+	i, and b.
+
+Wed Feb 23 10:44:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* stabs.texinfo: Document N_RBRAC as function relative for COFF as
+	well as for ELF and SOM.  Unify the descriptions of ELF and SOM
+	as "stabs in sections" rather than just saying "ELF and SOM".
+	Also make that stuff apply to COFF.
+
+Fri Feb 18 08:25:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Formatting Documentation): Change GhostScript to
+	Ghostscript.
+
+Fri Feb  4 06:31:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Continuing and Stepping): When talking about "step"
+	versus functions without line numbers, also mention stepping into
+	them as well as "step" when you are in them.  Tell the user how to
+	deal with the situation.  Add comment about "debugging information".
+
+Thu Feb  3 11:39:59 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Enumerations): Document restriction on where
+	enumeration types can appear and still win with GDB.
+
+Wed Feb  2 11:29:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Document format for type
+	-16.
+
+Thu Jan 27 16:53:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Selection, Frame Info): Update information about
+	arbitrary frame specficiations.
+
+Wed Jan 26 15:31:57 1994  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, remote.texi: general editing pass prior to Net release
+
+Tue Jan 25 12:12:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (String Field): Discuss continuing stabs with ?.
+
+Wed Jan 19 06:39:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
+
+	* stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.
+
+Sun Jan 16 12:43:32 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
+	Differences node to Statics node.
+	(Statics): Discuss XCOFF use of V symbol descriptor.
+
+	* Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
+	not clean.
+
+Wed Jan 12 21:29:54 1994  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.texinfo (Print Settings): Document `set print
+	fast-symbolic-addr' and improve the doc for some other
+	`set print's.
+
+Mon Jan  3 17:23:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (String Field): Talk about defining several type
+	numbers at once.
+	Fix lint regarding changing node ELF Transformations to
+	ELF and SOM Transformations.
+
+Fri Dec 31 00:42:43 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).
+
+Tue Dec 28 09:30:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Cross-References): `::' is for nested types only
+	within <>.
+	(Structures): Document static members.
+
+Mon Dec 27 13:55:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Document S type attribute.
+
+Sun Dec 26 20:46:36 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* stabs.texinfo: Add notes about stabs-in-som where appropriate.
+
+Fri Dec  3 19:13:19 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Fix a few typos.
+
+Sun Nov 28 18:06:25 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, remote.texi: formatting improvements
+
+	* gdb.texinfo (New Features): mention threads.
+	(Summary, C): fix xrefs in newly contributed text.
+	(Threads): index entries, clarifications, example
+	(passim): minor typos fixed, phrasing improvements
+
+	* remote.texi (Bootstrapping): rephrase text on ^C and add index
+	entries; (Server): explain use of gdbserver w/real-time systems,
+	add example of conflicting TCP port; (MIPS Remote) break up
+	running text into table, highlighting commands, and add example.
+	
+Wed Nov 24 14:15:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed
+
+Fri Nov 12 16:10:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Nested Symbols): New node.
+	(String Field, Symbol Descriptors, Cross-References): Refer to it.
+
+Thu Nov 11 13:26:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
+	to picking which Bbss.bss symbol to use, and (because there seems to
+	be no good way of doing it) re-write some of the text to make it
+	sound like Bbss.bss isn't such a great idea after all (as currently
+	designed).
+
+	* gdb.texinfo (C): In addition to saying people have to use g++ for
+	good results, say they have to use stabs.  Specifically say cfront
+	doesn't work well.
+	(Summary): Merge in information on Modula-2, Pascal, and Chill from
+	the gdb README.  Add xrefs to places where the support for the various
+	languages is described in detail.
+
+Mon Nov  8 11:47:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Clean up stuff about visibility and virtual
+	characters.
+
+	* stabs.texinfo (N_M2C): Cite Sun doc.
+
+Fri Nov  5 16:27:27 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: updates re threads.
+	* remote.texinfo: avoid index entries starting with digits.
+
+Tue Nov  2 09:08:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Enumerations): Talk about large, negative and
+	octal values.  Clean up cross reference to type attributes.
+	(String Field): Say that GDB 4.11 supports size attribute.
+
+Sun Oct 31 13:31:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
+	is a mandatory step.  Make the stuff about that more concise.
+
+Wed Oct 27 00:25:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Class Names): New node.
+
+	* gdb.texinfo (Command Files): Explain order of init file reading.
+
+	* remote.texi (Bootstrapping): Talk about getting the serial driver
+	to deal with ^C sent by gdb to stop the remote system.
+
+Mon Oct 25 03:25:41 1993  Tom Lord  (lord@cygnus.com)
+
+	* libgdb.texinfo (I/O): incorporated better phrasing from rich.
+
+	* libgdb.texinfo (Defining Commands): made the DOC arg
+	to gdb_define_app_command a char * instead of char **
+	per a suggestion from kingdon.
+
+	* libgdb.texinfo: total rewrite from a different starting
+	premise.
+
+Wed Oct 20 18:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Local Variable Parameters): Re-write paragraph on
+	floats passed as doubles (to improve clarity).
+
+Tue Oct 19 14:21:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo (Source Path): index entries for $cwd, $pdir
+
+	* a4rc.sed: update to work with Andreas Vogel papersize params
+
+	* refcard.tex: use Andreas Vogel simplifications of papersize
+	params; remove useless version info; update copyright date.
+
+Tue Oct 19 10:46:22 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Symbols): Add class NAME to doc for ptype.
+
+Tue Oct 12 09:11:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Files): Say what address the load command loads it at.
+
+	* stabs.texinfo (Common Blocks): Minor cleanups.
+
+	* stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
+	that Sun has backed away from the linker kludge and thus the relevant
+	issue is changes to the SunPRO tools, not the Solaris linker.
+
+	* stabs.texinfo (Traditional Integer Types): Clean up description
+	of octal bounds a little bit.  Document extra leading zeroes.
+
+Thu Oct  7 16:15:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Signaling): Update for symbolic symbol names
+	and add a section explaining the difference between the GDB
+	signal command and the shell kill utility.
+
+Wed Oct  6 13:23:01 1993  Tom Lord  (lord@rtl.cygnus.com)
+
+	* libgdb.texinfo: added `@' to braces that were unescaped.
+
+Mon Oct  4 10:42:18 1993  Tom Lord  (lord@rtl.cygnus.com)
+
+	* libgdb.texinfo: new file.  Spec for the gdb library.
+
+Sun Oct  3 15:26:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Include Files): Fix typo (start -> end).
+
+Thu Sep 30 18:24:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, remote.texi: assorted small improvements, mostly
+	from Melissa at FSF's editing pass.
+
+Thu Sep 30 11:54:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo: Remove stuff about ar and 14 character filenames.
+	I believe this was fixed by the 13 Sep 89 change to print_frame_info.
+	Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
+
+Wed Sep 22 21:22:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.texi (Bootstrapping): Discuss 386 call gates.
+
+Sat Sep 18 17:10:44 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
+
+	* stabs.texinfo (Based Variables): New node.
+
+Thu Sep 16 17:48:55 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Re-write discussions of
+	names, sizes, and formats to suggest how not to lose.
+
+Sat Sep 11 09:35:11 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
+
+	* stabs.texinfo (Methods): Fix typo.
+
+Fri Sep 10 06:34:20 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
+
+	* gdb.texinfo: Fix a few typos.
+
+Wed Sep  8 09:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo: Clarify how well it works with Fortran.
+
+	* stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
+	More on relocating stabs in ELF files.
+
+Tue Sep  7 13:45:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stabs In ELF): Talk about N_FUN value.
+
+Mon Sep  6 19:23:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Local Variable Parameters): Talk about nameless
+	parameters on VAX.
+
+Fri Sep  3 17:06:08 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: @up/@down -> @raisesections/@lowersections
+
+Fri Sep  3 12:04:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Make info author notice match the TeX author notice.
+
+Tue Aug 31 13:21:06 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
+
+	* stabs.texinfo: Initial-caps all words in node names and
+	non-trivial words in section names.
+
+Mon Aug 30 11:13:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Many minor cleanups.
+
+	* stabs.texinfo: Remove @deffn except from Expanded Reference node.
+
+Sat Aug 28 12:08:09 1993  David J. MacKenzie  (djm@edison.eng.umd.edu)
+
+	* stabs.texinfo: Remove full description of big example.
+	It's not really helpful; just use pieces of it where appropriate.
+	Add more Texinfo formatting directives (@samp, etc.).
+	Use @deffn to define stab types.
+	Eliminate some wordiness.  Break up some nodes.
+	Add an (alphabetized) index of symbol types.
+	Use consistent capitalization style in node and section names.
+
+Thu Aug 26 06:36:31 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* gdb.texinfo:  Change typo "Two two" to "The two".
+
+Sun Aug 22 12:15:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (XCOFF-differences): Remove references to
+	non-existent types N_DECL and N_RPSYM.
+
+	* stabs.texinfo (String Field): Say that type attributes bug is
+	fixed in GDB 4.10, since it is.
+
+	* stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.
+
+Sat Aug 21 04:32:28 1993  David MacKenzie  (djm@cygnus.com)
+
+	* stabs.texinfo: Formatting cleanups.
+
+Fri Aug 20 20:49:53 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: When explaining the n_type of a stab, standardize
+	how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
+	no tabs, use @r).
+	(Global Variables): Clean up.
+
+Tue Aug 17 15:57:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stack Variables): Re-write.
+
+Mon Aug 16 21:20:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stabs-in-elf): Talk about getting the start
+	addresses of a source file.  Also revise formatting.
+	Change "object module" or "object file" to "source file".
+	Various: Miscellaneous cleanups.
+
+Thu Aug 12 15:11:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.
+
+Tue Aug 10 16:57:49 1993  Stan Shebs  (shebs@rtl.cygnus.com)
+
+	* gdbint.texinfo: Removed many nonsensical machine-collected
+	host and target conditionals, described some of the remainder.
+
+Tue Aug 10 13:28:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbint.texinfo (Getting Started): Use @itemize, not @table.
+
+	* gdbint.texinfo (Top): Add name to @top line, and re-write the
+	paragraph which follows.
+
+	* gdbint.texinfo (Host): Use @code not @samp for Makefile
+	variables.  Looks better and avoids overful hbox.
+
+Fri Jul 30 18:26:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Procedures): Improve stuff on nested functions.
+
+Thu Jul 29 15:10:58 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* remote.texi: (MIPS Remote) clearer doc for set/show timeout,
+	retransmit-timeout
+
+Thu Jul 29 13:16:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbint.texinfo: Update statement about `some ancient Unix
+	systems, like Ultrix 4.0' to Ultrix 4.2.
+
+Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)
+
+	* h8-cfg.texi, all-cfg.texi: new flag GDBSERVER
+
+	* Makefile.in: depend on remote.texi rather than gdbinv-s.texi
+
+	* remote.texi: (Server) New node on gdbserver.  (Remote Serial,
+	ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.
+
+	* remote.texi: new name for former gdbinv-s.texi
+
+	* gdb.texinfo: use remote.texi rather than gdbinv-s.texi
+
+Wed Jul 28 08:26:24 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* gdbinv-s.texi: Documented timeout and retransmit-timeout
+	variables for MIPS remote debugging protocol.
+
+Mon Jul 26 13:00:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.
+
+Tue Jul 20 16:30:41 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* Makefile.in (refcard.dvi): Use srcdir where necessary.
+
+Mon Jul 19 12:02:50 1993  Roland H. Pesch  (pesch@cygnus.com)
+
+	* gdb.texinfo: repair conditional bugs in text markup
+
+Fri Jul 16 18:57:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
+	to select Modula-2 material.
+
+Thu Jul 15 13:15:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Cleanups regarding statics.
+
+	* gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
+	(Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.
+
+Mon Jul 12 13:37:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: N_MAIN is sometimes used for C.
+
+Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.
+
+Tue Jul  6 12:41:28 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
+	removed from the code by Kingdon. 
+
+Tue Jul  6 12:24:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.texinfo (Break Commands): Remove stuff about flushing terminal
+	input when evaluating breakpoint conditions; the bug has been fixed.
+
+	* gdb.texinfo (Continuing and Stepping): Argument to "continue"
+	sets the ignore count to N-1, not to N.
+
+Thu Jul  1 14:57:42 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* refcard.tex (\hoffset): correct longstanding error to match
+	  intended offset; avoids cutting off edge on some printers
+
+Wed Jun 30 18:23:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Parameters): Say that order of stabs is significant.
+
+Fri Jun 25 21:34:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.
+
+Fri Jun 25 16:15:10 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* Makefile.in: (REFEDITS) new var to control whether PS or CM
+	fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
+	collect sed edits if any, apply to refcard before formatting;
+	(refcard.ps) stop implying PS fonts if PS output requested;
+	(lrefcard.ps) delete extra target for variant PS fonts
+
+	* refcard.tex: parametrize papersize dependent info, collect
+	  in easily replaced spot
+
+	* a4rc.sed: new file, edits to refcard for A4 paper
+
+Fri Jun 25 14:21:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.
+
+Wed Jun 23 15:02:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Negative Type Numbers): Minor character cleanups.
+
+Tue Jun 22 16:31:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Express disapproval of 'D' symbol descriptor
+	politely rather than rudely.
+
+Fri Jun 18 19:42:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Document common blocks.
+
+Fri Jun 18 12:12:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* stabs.texinfo:  Add some basic info about stabs-in-elf.
+
+Fri Jun 18 13:57:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Top): Minor cleanup.
+
+Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
+
+	* Makefile.in (install-info): remove parentdir support
+
+Tue Jun 15 18:11:39 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo (Copying): delete this node and references to it;
+	RMS says this manual need not carry GPL. (passim): Improvements
+	from last round at FSF, largely due to Ian Taylor review, and
+	minor formatting improvements.
+
+	* gdbinv-s.texi (passim): Improvements from last round at FSF,
+	largely due to Ian Taylor review. (Debug Session): minor edits to
+	new text.
+
+Sun Jun 13 12:52:39 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Makefile.in (realclean): Remove info and dvi files too.
+
+Sat Jun 12 16:09:22 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
+	* Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
+	* gdb.texinfo: Change accordingly.
+
+	* stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
+	N_{L,R}BRAC,N_SLINE are relative to.
+
+Fri Jun 11 15:15:55 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* Makefile.in (GDBvn.texi): Update atomically.
+
+Wed Jun  9 10:58:16 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdbinv-s.texi (Debug Session): Document exceptionHook.
+
+Tue Jun  8 13:42:04 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.texinfo (Print Settings): Move all stuff relating to symbolic
+	addresses together.  Also motivate the set print symbol-filename
+	command and suggest other solutions.
+
+Tue Jun  1 22:46:43 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.texinfo (set print elements):  Note that the number of
+	elements is set to unlimited by "set print elements 0".
+
+Mon May 31 08:06:55 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo (Builtin Type Descriptors): Try to clarify what
+	NF_LDOUBLE means.
+	(Stab Types): Include Solaris stab types.
+	(Procedures): Document Solaris extensions.
+
+Thu May 27 06:20:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.texinfo:  Add `set print symbol-filename' doc.
+
+Wed May 26 00:26:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Arrays): Talk about type definition vs. type
+	information.
+
+	* stabs.texinfo (Builtin Type Descriptors): Talk about omitting
+	the trailing semicolon.
+
+Tue May 25 14:49:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
+	and merge in other parts of the document addressing these subjects.
+	gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.
+
+	* stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
+	at the end of a range type.
+
+	* stabs.texinfo (Subranges): "A offset" and "T offset" are not
+	AIX extensions.
+
+Mon May 24 09:00:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Stabs Format):  Misc fixes.
+
+Sat May 22 10:40:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
+	(Traditional builtin types): Document convex convention for long long.
+	(Negative builtin types): Discuss type names, and misc fixes.
+
+Fri May 21 11:20:31 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Builtin Type Descriptors): Document the floating
+	point types used with @samp{R} type descriptor.
+	(Symbol Descriptors): Describe how to handle conflict between
+	different meanings of @samp{P} symbol descriptor.
+
+Thu May 20 13:35:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo: Remove node Quick Reference and put its children
+	directly under the main menu.
+
+	* stabs.texinfo: Many more changes to bring it into line with
+	AIX documentation and reality.  I think it now has all the
+	information from the AIX documentation, except that I burned
+	out when I got to variant records (Pascal and Modula-2) and
+	all the COBOL types.  Oh well, we can add them later when we're
+	worrying more about those languages.
+
+	* stabs.texinfo (Automatic variables): Talk about what it means
+	to omit the symbol descriptor.
+
+Tue May 18 17:59:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabs.texinfo (Parameters): Add "(sometimes)" when describing
+	gcc2 behavior with promoted args.
+
+Fri May 14 21:35:29 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: include readline appendices in info version of manual
+
+Fri May  7 11:56:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdbinv-s.texi (Remote Serial): describe new ^C behavior in
+	target remote.
+
+	* gdb.texinfo (Machine Code): more index entries for disassemble
+
+Fri May  7 10:12:30 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Clarify the intended use of the gdb-testers and gdb-patches
+	mailing lists, and shrink gzip comment.
+
+Thu May  6 16:39:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo (Shell Commands): do not mention SHELL env var in
+	DOSHOST configuration of manual.
+
+	* gdb.texinfo (MIPS Stack): new node.
+
+	* all-config.texi (MIPS) new switch.
+
+	* gdbinv-s.texi (Nindy Options) Remove two instances of future
+	tense; (MIPS Remote) new node.
+
+	* gdb.texinfo (passim) rephrases to work around makeinfo @value
+	bug; (Environment) less passive, other small cleanups in text about
+	.cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
+	(Remote) new MIPS Remote menu entry.
+
+Thu Apr 29 09:36:25 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo: Many changes to include information from the
+	AIX documentation.
+
+	* gdb.texinfo (Environment): Mention pitfall with .cshrc.
+
+Tue Apr 27 14:02:57 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdbint.texinfo (new node Debugging GDB, elsewhere):
+	Move a bunch of information from ../README.
+	(Getting Started): New node.
+
+Fri Apr 23 17:21:13 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdbinv-s.texi, gdb.texinfo: include Hitachi SH target
+
+	* gdb.texinfo: advance manual revision dates to present
+
+	* gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
+	stop using silly Roman numerals in @set variable names
+
+Fri Apr 23 07:30:01 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo (Parameters): Keep trying to get this right.
+
+Wed Apr 21 15:18:47 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo (Parameters): More on "local parameters".
+
+Mon Apr 19 08:00:51 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo (Parameters): Re-do "local parameters" section.
+
+Sun Apr 18 09:47:45 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
+	(Parameters): Rewrite.
+	(xcoff-differences, Sun-differences): Minor changes.
+
+Thu Apr 15 02:35:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* stabs.texinfo:  Minor cleanup.
+
+Wed Apr 14 17:31:00 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdbint.texinfo: Minor xcoff stuff.
+
+Wed Apr  7 14:11:07 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdbint.texinfo:  Update for new config directory structure.
+	Add info about internal type data structures.
+
+Mon Apr  5 09:06:30 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
+	$(srcdir).
+	(gdb-config.texi): Depend on file in $(srcdir).
+
+Fri Apr  2 16:55:13 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo: Fixes about N_SO.
+
+Fri Mar 26 18:00:35 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: include list of nonstandard init file names
+
+	* *-config.texi: new switch GENERIC for text that applies *only*
+	to (usual) multiple-target version of manual
+
+	* gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
+	h8 config
+
+	* gdb.texinfo: depend on latest fixed makeinfo, use conditionals
+	in menus (rather than conditionally selected multiple alternative
+	menus).
+
+	* Makefile.in: define and use DOC_CONFIG var to select
+	configuration for GDB user manual.
+
+	* gdb-config.texi: delete from repository, generate from Makefile.
+
+	* all-config.texi: normal `generic' configuration file, formerly
+	stored as gdb-config.texi
+
+Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
+
+	* Makefile.in: add dvi target to build all .dvi files
+
+Tue Mar 23 16:03:24 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, gdvinv-s.texinfo: formatting improvements.
+
+Fri Mar 19 21:46:50 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
+	host conditionals.
+	* stabs.texinfo:  More array fixes inspired by Jim's.
+
+Fri Mar 19 10:23:34 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* stabs.texinfo: Fixes re arrays and continuations.
+
+	* gdbint.texinfo: Add XCOFF node.
+
+Mon Mar  8 15:52:18 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.texinfo:  Add `set print max-symbolic-offset' doc.
+
+Sun Feb 21 17:09:38 1993  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* stabs.texinfo:  Fix for array types to mention lower bounds.
+
+Thu Feb 18 01:19:49 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.
+
+Wed Feb 17 08:15:24 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.
+
+Thu Feb 11 10:38:40 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
+	by Michael Ben-Gershon <mybg@CS.HUJI.AC.IL>.
+
+Wed Feb 10 23:59:19 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.
+
+Tue Feb  9 18:26:21 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, gdbinv-s.texi: misc updates
+
+Sat Feb  6 10:25:47 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Brief documentation for longjmp support,
+	from an email msg by Stu.
+
+Fri Feb  5 14:10:15 1993  John Gilmore  (gnu@cygnus.com)
+
+	* stabs.texinfo:  Fix description of floating point "range"
+	types (which really define basic types).  Reported by Jim Meehan,
+	<meehan@src.dec.com>.
+
+	* gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.
+
+Thu Feb  4 13:56:46 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* gdbint.texinfo: Slightly expand section on supporting a new
+	object file format.
+
+Thu Feb  4 01:49:04 1993  John Gilmore  (gnu@cygnus.com)
+
+	* Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
+	intermediate file.
+
+Tue Feb  2 12:18:06 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups
+
+Mon Feb  1 15:35:47 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdbinv-s.texi: z8000 simulator target name is just "sim"
+
+	* gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
+	as well as Z8002.
+
+Sat Nov 28 06:51:35 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Add sections on clean design and on how to send
+	in changes.
+
+Mon Nov  9 23:57:02 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Add how to declare the result of make_cleanup.
+
+Mon Oct 26 11:09:47 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.texinfo:  Fix typo, reported by Karl Berry.
+
+Fri Oct 23 00:41:21 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.texinfo:  Add opcodes dir to GDB distribution description.
+
+Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* gdbint.texinfo: fixed a stray email address (needs @@),
+	added @table @code to node "Native Conditionals"
+
+Tue Sep 22 00:34:15 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Describe coding style of GDB.
+
+Mon Sep 21 19:32:16 1992  John Gilmore  (gnu@cygnus.com)
+
+	* stabs.texinfo:  Minor wording changes.
+
+Tue Sep 15 02:57:09 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Improve release doc slightly.
+
+Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
+
+	* gdbint.texinfo:  Improve doc of GDB config macros.
+
+Wed Sep  9 16:52:06 1992  John Gilmore  (gnu@cygnus.com)
+
+	* stabs.texinfo:  Remove Bothner's changes for C++ nested types.
+	These will be reinserted when examined.
+
+Mon Aug 24 01:17:55 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Make a start at documenting all the #if macros
+	in GDB.  At least list them all, and start separating them into
+	host-specific and target-specific.
+
+Tue Aug 18 15:59:13 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdbinv-s.m4.in: refrain from using @cartouche for just a few
+	examples (not consistent w others).  
+	gdb.texinfo: issue disclaimer paragraph on cmdline options only
+	for generic vn of doc
+
+Tue Aug 18 14:53:27 1992  Ian Lance Taylor  (ian@cygnus.com)
+
+	* Makefile.in: always create installation directories.
+
+Tue Aug 18 14:11:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: in h8 config, do not describe searching commands.
+
+Mon Aug 17 18:07:59 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
+	  conditionals; introduce a few generic switches that may be
+	  useful for other cross-dev or dos-hosted configs.
+
+	* gdb.texinfo: fix typo in "info reg" description
+
+Sun Aug 16 01:16:18 1992  John Gilmore  (gnu@cygnus.com)
+
+	* stabs.texinfo:  Minor updates from running TeX over it.
+	* Makefile.in (stabs.dvi, stabs.ps):  Add.
+
+Sat Aug 15 20:52:24 1992  Per Bothner  (bothner@rtl.cygnus.com)
+
+	* stabs.texinfo:  Stabs documentation, written by Julia Menapace.
+	First pass at converting it to texinfo.
+
+Sat Aug 15 03:14:59 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
+	* Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).
+
+Fri Aug 14 21:08:47 1992  John Gilmore  (gnu@cygnus.com)
+
+	* gdbint.texinfo:  Add section on partial symbol tables.
+
+Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)
+
+	* gdb.texinfo:  document `set remotedebug' and `set
+	rstack_high_address'.
+
+Thu May 14 17:09:48 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
+
+	* gdb.texinfo: slight expansion of new text on reading info files
+	* gdbinv-s.m4.in: correct and expand info on cross-debugging
+	H8/300 from DOS.
+
+Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)
+
+	* gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.
+
+Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)
+
+	* gdb.texinfo:  Say how to read the `info' files.
+
+Tue May  5 12:11:38 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: gm4 -> m4.
+
+Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)
+
+	* gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
+	Documentation' ahead of `Installing GDB' to match README.
+	Update shared library doc, -readnow and -mapped, and directory
+	structure (add glob and mmalloc).  Update configure doc.	
+
+Tue Mar 24 23:28:38 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in: remove $(srcdir) from gdb.info rule.
+
+Sat Mar  7 18:44:50 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* Makefile.in: commented out gdb-all.texinfo rule.  This is
+	  temporary.
+
+Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
+
+	* Makefile.in, configure.in: removed traces of namesubdir,
+	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
+	  copyrights to '92, changed some from Cygnus to FSF.
+
+Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)
+
+	* gdb.texinfo:  Improve how we ask for bug reports.
+
+Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: infodir belongs in datadir.
+
+Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: remove spaces following hyphens, bsd make can't
+	  cope.  install using INSTALL_DATA.  added clean-info.  added
+	  standards.text support. 
+
+Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
+
+	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
+	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
+	  and mandir now keyed off datadir by default.
+
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/doc/HPPA-cfg.texi b/gdb/doc/HPPA-cfg.texi
new file mode 100644
index 0000000..88a138c
--- /dev/null
+++ b/gdb/doc/HPPA-cfg.texi
@@ -0,0 +1,114 @@
+@c GDB MANUAL configuration file.  
+@c Copyright (c) 1993 Free Software Foundation, Inc.
+@c
+@c NOTE: While the GDB manual is configurable (by changing these
+@c switches), its configuration is ***NOT*** automatically tied in to
+@c source configuration---because the authors expect that, save in
+@c unusual cases, the most inclusive form of the manual is appropriate
+@c no matter how the program itself is configured.
+@c
+@c The only automatically-varying variable is the GDB version number,
+@c which the Makefile rewrites based on the VERSION variable from
+@c `../Makefile.in'.  
+@c 
+@c GDB version number is recorded in the variable GDBVN
+@include GDBvn.texi
+@c
+@c ----------------------------------------------------------------------
+@c PLATFORM FLAGS:
+@clear GENERIC
+@c
+@c HP PA-RISC target:
+@set HPPA
+@c
+@c Hitachi H8/300 target:
+@clear H8
+@c Hitachi H8/300 target ONLY:
+@clear H8EXCLUSIVE
+@c
+@c remote MIPS target:
+@clear MIPS
+@c
+@c SPARC target:
+@clear SPARC
+@c
+@c AMD 29000 target:
+@clear AMD29K
+@c
+@c Intel 960 target:
+@clear I960
+@c
+@c Tandem ST2000 (phone switch) target:
+@clear ST2000
+@c
+@c Zilog 8000 target:
+@clear Z8K
+@c
+@c Wind River Systems VxWorks environment:
+@clear VXWORKS
+@c
+@c ----------------------------------------------------------------------
+@c DOC FEATURE FLAGS:
+@c 
+@c Bare-board target?
+@clear BARETARGET
+@c
+@c Restrict languages discussed to C?
+@c This is backward.  As time permits, change this to language-specific
+@c switches for what to include.
+@clear CONLY
+@c Discuss Fortran?
+@clear FORTRAN
+@c
+@c Discuss Modula 2?
+@clear MOD2
+@c
+@c Specifically for host machine running DOS?
+@clear DOSHOST
+@c
+@c Talk about CPU simulator targets?
+@clear SIMS
+@c
+@c Remote serial line settings of interest?
+@set SERIAL
+@c
+@c Discuss features requiring Posix or similar OS environment?
+@set POSIX
+@c
+@c Discuss remote serial debugging stub?
+@clear REMOTESTUB
+@c
+@c Discuss gdbserver?
+@set GDBSERVER
+@c
+@c Discuss gdbserve.nlm?
+@set GDBSERVE
+@c
+@c Refrain from discussing how to configure sw and format doc?
+@clear PRECONFIGURED
+@c
+@c Refrain from referring to unfree publications?
+@set FSFDOC
+@c
+@c ----------------------------------------------------------------------
+@c STRINGS:
+@c
+@c Name of GDB program.  Used also for (gdb) prompt string.
+@set GDBP gdb
+@c 
+@c Name of GDB product.  Used in running text.
+@set GDBN GDB
+@c
+@c Name of target.
+@set TARGET HP 9000 Systems
+@c 
+@c Name of host.  Should not be used in generic configs, but generic
+@c value may catch some flubs.
+@set HOST machine specific
+@c
+@c Name of GCC product
+@set NGCC GCC
+@c 
+@c Name of GCC program
+@set GCC gcc
+
diff --git a/gdb/doc/LRS b/gdb/doc/LRS
new file mode 100644
index 0000000..7e25d43
--- /dev/null
+++ b/gdb/doc/LRS
@@ -0,0 +1,197 @@
+What's LRS?
+===========
+
+LRS, or Live Range Splitting is an optimization technique which allows
+a user variable to reside in different locations during different parts
+of a function.
+
+For example, a variable might reside in the stack for part of a function
+and in a register during a loop and in a different register during
+another loop.
+
+Clearly, if a variable may reside in different locations, then the
+compiler must describe to the debugger where the variable resides for
+any given part of the function.
+
+This document describes the debug format for encoding these extensions
+in stabs.
+
+Since these extensions are gcc specific, these additional symbols and
+stabs can be disabled by the gcc command option -gstabs.
+
+
+GNU extensions for LRS under stabs:
+===================================
+
+
+range symbols:
+-------------
+
+    A range symbol will be used to mark the beginning or end of a
+    live range (the range which describes where a symbol is active,
+    or live).  These symbols will later be referenced in the stabs for
+    debug purposes.  For simplicity, we'll use the terms "range_start"
+    and "range_end" to identify the range symbols which mark the beginning
+    and end of a live range respectively.
+
+    Any text symbol which would normally appear in the symbol table
+    (eg. a function name) can be used as range symbol.  If an address
+    is needed to delimit a live range and does not match any of the
+    values of symbols which would normally appear in the symbol table,
+    a new symbol will be added to the table whose value is that address.
+
+    The three new symbol types described below have been added for this 
+    purpose.
+
+    For efficiency, the compiler should use existing symbols as range
+    symbols whenever possible; this reduces the number of additional
+    symbols which need to be added to the symbol table.
+
+    
+New debug symbol type for defining ranges:
+------------------------------------------
+
+    range_off - contains PC function offset for start/end of a live range.
+		Its location is relative to the function start and therefore 
+		eliminates the need for additional relocation.
+
+    This symbol has a values in the text section, and does not have a name.
+
+	    NOTE: the following may not be needed but are included here just 
+		in case.
+	    range - contains PC value of beginning or end of a live range
+		(relocs required).
+
+	    NOTE: the following will be required if we desire LRS debugging
+		to work with old style a.out stabs.
+	    range_abs - contains absolute PC value of start/end of a live 
+		range.  The range_abs debug symbol is provided for 
+		completeness, in case there is a need to describe addresses 
+		in ROM, etc.
+
+
+Live range:
+-----------
+
+    The compiler and debugger view a variable with multiple homes as
+    a primary symbol and aliases for that symbol.  The primary symbol
+    describes the default home of the variable while aliases describe
+    alternate homes for the variable.
+
+    A live range defines the interval of instructions beginning with
+    range_start and ending at range_end-1, and is used to specify a
+    range of instructions where an alias is active or "live".  So,
+    the actual end of the range will be one less than the value of the
+    range_end symbol.
+
+    Ranges do not have to be nested. Eg. Two ranges may intersect while 
+        each range contains subranges which are not in the other range.
+
+    There does not have to be a 1-1 mapping from range_start to
+        range_end symbols.  Eg. Two range_starts can share the same 
+        range_end, while one symbol's range_start can be another symbol's
+        range_end.
+
+    When a variable's storage class changes (eg. from stack to register,
+	or from one register to another), a new symbol entry will be
+	added to the symbol table with stabs describing the new type,
+	and appropriate live ranges refering to the variable's initial
+	symbol index.
+
+    For variables which are defined in the source but optimized away,
+        a symbol should be emitted with the live range l(0,0).
+
+    Live ranges for aliases of a particular variable should always
+	be disjoint.  Overlapping ranges for aliases of the same variable
+	will be treated as an error by the debugger, and the overlapping
+	range will be ignored.
+
+    If no live range information is given, the live range will be assumed to 
+	span the symbol's entire lexical scope.
+
+
+New stabs string identifiers:
+-----------------------------
+
+  "id" in "#id" in the following section refers to a numeric value.
+
+  New stab syntax for live range:  l(<ref_from>,<ref_to>) 
+
+    <ref_from> - "#id" where #id identifies the text symbol (range symbol) to
+		use as the start of live range (range_start).  The value for 
+		the referenced text symbol is the starting address of the 
+		live range.
+
+    <ref_to> - "#id" where #id identifies the text symbol (range symbol) to
+		use as the end of live range (range_end).  The value for 
+		the referenced text symbol is ONE BYTE PAST the ending 
+		address of the live range.
+
+
+  New stab syntax for identifying symbols.
+
+    <def> - "#id="
+
+	    Uses:
+	      <def><name>:<typedef1>...
+		  When used in front of a symbol name, "#id=" defines a
+		  unique reference number for this symbol.  The reference
+		  number can be used later when defining aliases for this
+		  symbol.
+	      <def>
+		  When used as the entire stab string, "#id=" identifies this 
+		  nameless symbol as being the symbol for which "#id" refers to.
+
+
+    <ref> - "#id" where "#id" refers to the symbol for which the string 
+		"#id=" identifies.
+	    Uses:
+	      <ref>:<typedef2>;<liverange>;<liverange>...
+		  Defines an alias for the symbol identified by the reference
+		  number ID.
+	      l(<ref1>,<ref2>)
+		  When used within a live range, "#id" refers to the text 
+		  symbol identified by "#id=" to use as the range symbol.
+
+    <liverange> - "l(<ref_from>,<ref_to>)" - specifies a live range for a 
+		symbol.  Multiple "l" specifiers can be combined to represent 
+		mutiple live ranges, separated by semicolons.
+
+
+
+
+Example:
+========
+
+Consider a program of the form:
+
+    void foo(){
+      int a = ...;
+      ...
+      while (b--)
+       c += a;
+      ..
+      d = a;
+      ..
+    }
+
+Assume that "a" lives in the stack at offset -8, except for inside the
+loop where "a" resides in register "r5".
+
+The way to describe this is to create a stab for the variable "a" which
+describes "a" as living in the stack and an alias for the variable "a"
+which describes it as living in register "r5" in the loop.
+
+Let's assume that "#1" and "#2" are symbols which bound the area where
+"a" lives in a register.
+
+The stabs to describe "a" and its alias would look like this:
+
+        .stabs "#3=a:1",128,0,8,-8
+        .stabs "#3:r1;l(#1,#2)",64,0,0,5
+
+
+This design implies that the debugger will keep a chain of aliases for
+any given variable with aliases and that chain will be searched first
+to find out if an alias is active.  If no alias is active, then the
+debugger will assume that the main variable is active.
diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
new file mode 100644
index 0000000..4bcd62e
--- /dev/null
+++ b/gdb/doc/Makefile.in
@@ -0,0 +1,340 @@
+##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
+
+# Makefile for GDB documentation.
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+
+infodir = @infodir@
+
+SHELL = @SHELL@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+# main GDB source directory
+gdbdir = $(srcdir)/..
+
+# where to find texinfo; GDB dist should include a recent one
+TEXIDIR=${gdbdir}/../texinfo
+
+# where to find makeinfo, preferably one designed for texinfo-2
+MAKEINFO=makeinfo
+
+# where to find texi2roff, ditto
+TEXI2ROFF=texi2roff
+
+# Where is the source dir for the READLINE library doc?  
+# Traditionally readline is in .. or .
+READLINE_DIR = ${gdbdir}/../readline/doc
+
+SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
+
+# There may be alternate predefined collections of switches to configure
+# the GDB manual.  Normally this is not done in synch with the software
+# config system, since this choice tends to be independent; most people
+# want a doc config of `all' for a generic manual, regardless of sw config.
+DOC_CONFIG = all
+
+# This list of sed edits will edit the GDB reference card
+# for what fonts and what papersize to use.
+# By default (NO edits applied), the refcard uses:
+#    - Computer Modern (CM) fonts
+#    - US letter paper (8.5x11in)
+# List some of the following files for alternative fonts and paper:
+#  a4rc.sed     use A4 paper (297 x 210 mm)
+#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
+# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
+# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
+#      for A4, CM fonts:    REFEDITS = a4rc.sed
+#      for US, PS fonts:    REFEDITS = psrc.sed
+#      for default:
+REFEDITS =
+
+# Don Knuth's TeX formatter
+TEX = tex
+
+# auxiliary program for sorting Texinfo indices
+TEXINDEX = texindex
+
+# Program to generate Postscript files from DVI files.
+DVIPS = dvips
+
+# Main GDB manual's source files
+SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
+
+SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
+
+SFILES_DOC = $(SFILES_LOCAL) \
+                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
+
+#### Host, target, and site specific Makefile fragments come in here.
+###
+
+all install:
+
+info: gdb.info gdbint.info stabs.info
+dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
+ps: gdb.ps gdbint.ps stabs.ps refcard.ps
+all-doc: info dvi ps
+
+install-info: info
+	for i in *.info* ; do \
+		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
+	done
+
+STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
+
+# Copy the object files from a particular stage into a subdirectory.
+stage1: force
+	-mkdir stage1
+	-mv $(STAGESTUFF) stage1
+
+stage2: force
+	-mkdir stage2
+	-mv $(STAGESTUFF) stage2
+
+stage3: force
+	-mkdir stage3
+	-mv $(STAGESTUFF) stage3
+
+against=stage2
+
+comparison: force
+	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
+
+de-stage1: force
+	-(cd stage1 ; mv -f * ..)
+	-rmdir stage1
+
+de-stage2: force
+	-(cd stage2 ; mv -f * ..)
+	-rmdir stage2
+
+de-stage3: force
+	-(cd stage3 ; mv -f * ..)
+	-rmdir stage3
+
+# The "least clean" level of cleaning.  Get rid of files which are
+# automatically generated files that are just intermediate files,
+# 
+mostlyclean:
+	rm -f gdb.mm gdb.ms gdb.me links2roff
+	rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
+	rm -f sedref.dvi sedref.tex tmp.sed
+
+clean: mostlyclean
+	rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi
+
+distclean: clean
+	rm -f Makefile config.status
+
+# GDBvn.texi, the dvi files, the info files, and the postscript files, 
+# are all part of the distribution, so it should not be removed by
+# "clean" or "distclean".  Use maintainer-clean to remove them.
+
+maintainer-clean realclean: distclean
+	rm -f GDBvn.texi *.info* *.dvi *.ps
+
+# GDB QUICK REFERENCE (dvi output)
+refcard.dvi : refcard.tex $(REFEDITS)
+	if [ -z "$(REFEDITS)" ]; then \
+		cp $(srcdir)/refcard.tex sedref.tex ; \
+	else \
+		echo > tmp.sed ; \
+		for f in "$(REFEDITS)" ; do \
+			cat $(srcdir)/$$f >>tmp.sed ; done ; \
+		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
+	fi
+	$(SET_TEXINPUTS) $(TEX) sedref.tex
+	mv sedref.dvi refcard.dvi
+	rm -f sedref.log sedref.tex tmp.sed
+
+refcard.ps : refcard.dvi
+	$(DVIPS) -t landscape -o $@ $?
+
+# File to record current GDB version number (copied from main dir Makefile.in)
+GDBvn.texi : ${gdbdir}/Makefile.in
+	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
+	mv GDBvn.new GDBvn.texi
+
+# Updated atomically
+.PRECIOUS: GDBvn.texi
+
+# Choose configuration for GDB manual (normally `all'; normally not tied into
+# `configure' script because most users prefer generic version of manual,
+# not one for their binary config---which may not be specifically
+# defined anyways).
+gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
+	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
+
+# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
+# If your texinfo or makeinfo don't support these, get a new texinfo release
+#
+# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
+#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
+#   source directory for the benefit of people who *don't* use this makefile,
+#   VPATH will often tell make not to bother building it, because the one
+#   in the srcdir is up to date.  (if not, then make should build one here).
+
+# GDB MANUAL: TeX dvi file
+gdb.dvi: ${SFILES_DOC}
+	if [ ! -f ./GDBvn.texi ]; then \
+		ln -s $(srcdir)/GDBvn.texi . || \
+		ln $(srcdir)/GDBvn.texi . || \
+		cp $(srcdir)/GDBvn.texi . ; else true; fi
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	$(TEXINDEX) gdb.??
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
+		gdb.tp* gdb.vr*
+
+gdb.ps: gdb.dvi
+	$(DVIPS) -o $@ $?
+
+# GDB MANUAL: info file
+# We're using texinfo2, and older makeinfo's may not be able to
+# cope with all the markup.  
+gdb.info: ${SFILES_DOC}
+	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
+
+# GDB MANUAL: roff translations
+# Try to use a recent texi2roff.  v2 was put on prep in jan91.
+# If you want an index, see texi2roff doc for postprocessing 
+# and add -i to texi2roff invocations below.
+# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
+#    corresponding -e lines when later texi2roff's are current)
+# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
+# + @c's deleted explicitly because texi2roff sees texinfo commands in them
+# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
+# + @alphaenumerate is ridiculously new, turned into @enumerate
+
+# texi2roff doesn't have a notion of include dirs, so we have to fake 
+# it out for gdb manual's include files---but only if not configured
+# in main sourcedir.
+links2roff: $(SFILES_INCLUDED)
+	if [ ! -f gdb.texinfo ]; then \
+		ln -s $(SFILES_INCLUDED) . || \
+		ln $(SFILES_INCLUDED)    . || \
+		cp $(SFILES_INCLUDED)    . ; \
+	fi
+	touch links2roff
+
+#  "Readline" appendices.  Get them also due to lack of includes, 
+# regardless of whether or not configuring in main sourcedir.
+# @ftable removed due to bug in texi2roff-2; if your texi2roff
+# is newer, try just ln or cp
+rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
+		sed -e 's/^@ftable/@table/g' \
+		-e 's/^@end ftable/@end table/g' \
+		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
+
+inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
+	ln -s ${READLINE_DIR}/inc-hist.texi . || \
+	ln ${READLINE_DIR}/inc-hist.texi . || \
+	cp ${READLINE_DIR}/inc-hist.texi .
+
+# gdb manual suitable for [gtn]roff -me
+gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -me | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.me 
+
+# gdb manual suitable for [gtn]roff -ms
+gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -ms | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.ms 
+
+# gdb manual suitable for [tn]roff -mm
+# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
+#   try leaving them in
+gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e '/@noindent/d' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -mm | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.mm 
+
+
+# GDB INTERNALS MANUAL: TeX dvi file
+gdbint.dvi : gdbint.texinfo
+	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
+	$(TEXINDEX) gdbint.??
+	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
+	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
+		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
+
+gdbint.ps : gdbint.dvi
+	$(DVIPS) -o $@ $?
+
+# GDB INTERNALS MANUAL: info file
+
+gdbint.info: gdbint.texinfo
+	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
+
+stabs.info: stabs.texinfo
+	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
+
+# STABS DOCUMENTATION: TeX dvi file
+stabs.dvi : stabs.texinfo
+	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
+	$(TEXINDEX) stabs.??
+	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
+	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
+		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
+
+stabs.ps: stabs.dvi
+	$(DVIPS) -o $@ $?
+
+force:
+
+Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
+	$(SHELL) ./config.status
diff --git a/gdb/doc/a4rc.sed b/gdb/doc/a4rc.sed
new file mode 100644
index 0000000..2292290
--- /dev/null
+++ b/gdb/doc/a4rc.sed
@@ -0,0 +1,11 @@
+/--- Papersize params:/,/--- end papersize params/c\
+%------- Papersize params:\
+%%  A4 paper (297x210mm)\
+%%\
+\\totalwidth=297mm   % total width of paper\
+\\totalheight=210mm  % total height of paper\
+\\hmargin=5mm        % horizontal margin width\
+\\vmargin=10mm       % vertical margin width\
+\\secskip=.6pc       % space between refcard secs\
+\\lskip=1pt          % extra skip between \\sec entries\
+%------- end papersize params
diff --git a/gdb/doc/agentexpr.texi b/gdb/doc/agentexpr.texi
new file mode 100644
index 0000000..4b790f5
--- /dev/null
+++ b/gdb/doc/agentexpr.texi
@@ -0,0 +1,839 @@
+\input texinfo
+@c %**start of header
+@setfilename agentexpr.info
+@settitle GDB Agent Expressions
+@setchapternewpage off
+@c %**end of header
+
+Revision: $Id$
+
+@node The GDB Agent Expression Mechanism
+@chapter The GDB Agent Expression Mechanism
+
+In some applications, it is not feasable for the debugger to interrupt
+the program's execution long enough for the developer to learn anything
+helpful about its behavior.  If the program's correctness depends on its
+real-time behavior, delays introduced by a debugger might cause the
+program to fail, even when the code itself is correct.  It is useful to
+be able to observe the program's behavior without interrupting it.
+
+Using GDB's @code{trace} and @code{collect} commands, the user can
+specify locations in the program, and arbitrary expressions to evaluate
+when those locations are reached.  Later, using the @code{tfind}
+command, she can examine the values those expressions had when the
+program hit the trace points.  The expressions may also denote objects
+in memory --- structures or arrays, for example --- whose values GDB
+should record; while visiting a particular tracepoint, the user may
+inspect those objects as if they were in memory at that moment.
+However, because GDB records these values without interacting with the
+user, it can do so quickly and unobtrusively, hopefully not disturbing
+the program's behavior.
+
+When GDB is debugging a remote target, the GDB @dfn{agent} code running
+on the target computes the values of the expressions itself.  To avoid
+having a full symbolic expression evaluator on the agent, GDB translates
+expressions in the source language into a simpler bytecode language, and
+then sends the bytecode to the agent; the agent then executes the
+bytecode, and records the values for GDB to retrieve later.
+
+The bytecode language is simple; there are forty-odd opcodes, the bulk
+of which are the usual vocabulary of C operands (addition, subtraction,
+shifts, and so on) and various sizes of literals and memory reference
+operations.  The bytecode interpreter operates strictly on machine-level
+values --- various sizes of integers and floating point numbers --- and
+requires no information about types or symbols; thus, the interpreter's
+internal data structures are simple, and each bytecode requires only a
+few native machine instructions to implement it.  The interpreter is
+small, and strict limits on the memory and time required to evaluate an
+expression are easy to determine, making it suitable for use by the
+debugging agent in real-time applications.
+
+@menu
+* General Bytecode Design::     Overview of the interpreter.
+* Bytecode Descriptions::       What each one does.
+* Using Agent Expressions::     How agent expressions fit into the big picture.
+* Varying Target Capabilities:: How to discover what the target can do.
+* Tracing on Symmetrix::        Special info for implementation on EMC's
+                                boxes.
+* Rationale::                   Why we did it this way.
+@end menu
+
+
+@c @node Rationale
+@c @section Rationale
+
+
+@node General Bytecode Design
+@section General Bytecode Design
+
+The agent represents bytecode expressions as an array of bytes.  Each
+instruction is one byte long (thus the term @dfn{bytecode}).  Some
+instructions are followed by operand bytes; for example, the @code{goto}
+instruction is followed by a destination for the jump.
+
+The bytecode interpreter is a stack-based machine; most instructions pop
+their operands off the stack, perform some operation, and push the
+result back on the stack for the next instruction to consume.  Each
+element of the stack may contain either a integer or a floating point
+value; these values are as many bits wide as the largest integer that
+can be directly manipulated in the source language.  Stack elements
+carry no record of their type; bytecode could push a value as an
+integer, then pop it as a floating point value.  However, GDB will not
+generate code which does this.  In C, one might define the type of a
+stack element as follows:
+@example
+union agent_val @{
+  LONGEST l;
+  DOUBLEST d;
+@};
+@end example
+@noindent
+where @code{LONGEST} and @code{DOUBLEST} are @code{typedef} names for
+the largest integer and floating point types on the machine.
+
+By the time the bytecode interpreter reaches the end of the expression,
+the value of the expression should be the only value left on the stack.
+For tracing applications, @code{trace} bytecodes in the expression will
+have recorded the necessary data, and the value on the stack may be
+discarded.  For other applications, like conditional breakpoints, the
+value may be useful.
+
+Separate from the stack, the interpreter has two registers:
+@table @code
+@item pc
+The address of the next bytecode to execute.
+
+@item start
+The address of the start of the bytecode expression, necessary for
+interpreting the @code{goto} and @code{if_goto} instructions.
+
+@end table
+@noindent
+Neither of these registers is directly visible to the bytecode language
+itself, but they are useful for defining the meanings of the bytecode
+operations.
+
+There are no instructions to perform side effects on the running
+program, or call the program's functions; we assume that these
+expressions are only used for unobtrusive debugging, not for patching
+the running code.  
+
+Most bytecode instructions do not distinguish between the various sizes
+of values, and operate on full-width values; the upper bits of the
+values are simply ignored, since they do not usually make a difference
+to the value computed.  The exceptions to this rule are:
+@table @asis
+
+@item memory reference instructions (@code{ref}@var{n})
+There are distinct instructions to fetch different word sizes from
+memory.  Once on the stack, however, the values are treated as full-size
+integers.  They may need to be sign-extended; the @code{ext} instruction
+exists for this purpose.
+
+@item the sign-extension instruction (@code{ext} @var{n})
+These clearly need to know which portion of their operand is to be
+extended to occupy the full length of the word.
+
+@end table
+
+If the interpreter is unable to evaluate an expression completely for
+some reason (a memory location is inaccessible, or a divisor is zero,
+for example), we say that interpretation ``terminates with an error''.
+This means that the problem is reported back to the interpreter's caller
+in some helpful way.  In general, code using agent expressions should
+assume that they may attempt to divide by zero, fetch arbitrary memory
+locations, and misbehave in other ways.
+
+Even complicated C expressions compile to a few bytecode instructions;
+for example, the expression @code{x + y * z} would typically produce
+code like the following, assuming that @code{x} and @code{y} live in
+registers, and @code{z} is a global variable holding a 32-bit
+@code{int}:
+@example
+reg 1
+reg 2
+const32 @i{address of z}
+ref32
+ext 32
+mul
+add
+end
+@end example
+
+In detail, these mean:
+@table @code
+
+@item reg 1
+Push the value of register 1 (presumably holding @code{x}) onto the
+stack.
+
+@item reg 2
+Push the value of register 2 (holding @code{y}).
+
+@item const32 @i{address of z}
+Push the address of @code{z} onto the stack.
+
+@item ref32
+Fetch a 32-bit word from the address at the top of the stack; replace
+the address on the stack with the value.  Thus, we replace the address
+of @code{z} with @code{z}'s value.
+
+@item ext 32
+Sign-extend the value on the top of the stack from 32 bits to full
+length.  This is necessary because @code{z} is a signed integer.
+
+@item mul
+Pop the top two numbers on the stack, multiply them, and push their
+product.  Now the top of the stack contains the value of the expression
+@code{y * z}.
+
+@item add
+Pop the top two numbers, add them, and push the sum.  Now the top of the
+stack contains the value of @code{x + y * z}.
+
+@item end
+Stop executing; the value left on the stack top is the value to be
+recorded.
+
+@end table
+
+
+@node Bytecode Descriptions
+@section Bytecode Descriptions
+
+Each bytecode description has the following form:
+
+@table @asis
+
+@item @code{add} (0x02): @var{a} @var{b} @result{} @var{a+b}
+
+Pop the top two stack items, @var{a} and @var{b}, as integers; push
+their sum, as an integer.
+
+@end table
+
+In this example, @code{add} is the name of the bytecode, and
+@code{(0x02)} is the one-byte value used to encode the bytecode, in
+hexidecimal.  The phrase ``@var{a} @var{b} @result{} @var{a+b}'' shows
+the stack before and after the bytecode executes.  Beforehand, the stack
+must contain at least two values, @var{a} and @var{b}; since the top of
+the stack is to the right, @var{b} is on the top of the stack, and
+@var{a} is underneath it.  After execution, the bytecode will have
+popped @var{a} and @var{b} from the stack, and replaced them with a
+single value, @var{a+b}.  There may be other values on the stack below
+those shown, but the bytecode affects only those shown.
+
+Here is another example:
+
+@table @asis
+
+@item @code{const8} (0x22) @var{n}: @result{} @var{n}
+Push the 8-bit integer constant @var{n} on the stack, without sign
+extension.
+
+@end table
+
+In this example, the bytecode @code{const8} takes an operand @var{n}
+directly from the bytecode stream; the operand follows the @code{const8}
+bytecode itself.  We write any such operands immediately after the name
+of the bytecode, before the colon, and describe the exact encoding of
+the operand in the bytecode stream in the body of the bytecode
+description.
+
+For the @code{const8} bytecode, there are no stack items given before
+the @result{}; this simply means that the bytecode consumes no values
+from the stack.  If a bytecode consumes no values, or produces no
+values, the list on either side of the @result{} may be empty.
+
+If a value is written as @var{a}, @var{b}, or @var{n}, then the bytecode
+treats it as an integer.  If a value is written is @var{addr}, then the
+bytecode treats it as an address.
+
+We do not fully describe the floating point operations here; although
+this design can be extended in a clean way to handle floating point
+values, they are not of immediate interest to the customer, so we avoid
+describing them, to save time.
+
+
+@table @asis
+
+@item @code{float} (0x01): @result{}
+
+Prefix for floating-point bytecodes.  Not implemented yet.
+
+@item @code{add} (0x02): @var{a} @var{b} @result{} @var{a+b}
+Pop two integers from the stack, and push their sum, as an integer.
+
+@item @code{sub} (0x03): @var{a} @var{b} @result{} @var{a-b}
+Pop two integers from the stack, subtract the top value from the
+next-to-top value, and push the difference.
+
+@item @code{mul} (0x04): @var{a} @var{b} @result{} @var{a*b}
+Pop two integers from the stack, multiply them, and push the product on
+the stack.  Note that, when one multiplies two @var{n}-bit numbers
+yielding another @var{n}-bit number, it is irrelevant whether the
+numbers are signed or not; the results are the same.
+
+@item @code{div_signed} (0x05): @var{a} @var{b} @result{} @var{a/b}
+Pop two signed integers from the stack; divide the next-to-top value by
+the top value, and push the quotient.  If the divisor is zero, terminate
+with an error.
+
+@item @code{div_unsigned} (0x06): @var{a} @var{b} @result{} @var{a/b}
+Pop two unsigned integers from the stack; divide the next-to-top value
+by the top value, and push the quotient.  If the divisor is zero,
+terminate with an error.
+
+@item @code{rem_signed} (0x07): @var{a} @var{b} @result{} @var{a modulo b}
+Pop two signed integers from the stack; divide the next-to-top value by
+the top value, and push the remainder.  If the divisor is zero,
+terminate with an error.
+
+@item @code{rem_unsigned} (0x08): @var{a} @var{b} @result{} @var{a modulo b}
+Pop two unsigned integers from the stack; divide the next-to-top value
+by the top value, and push the remainder.  If the divisor is zero,
+terminate with an error.
+
+@item @code{lsh} (0x09): @var{a} @var{b} @result{} @var{a<<b}
+Pop two integers from the stack; let @var{a} be the next-to-top value,
+and @var{b} be the top value.  Shift @var{a} left by @var{b} bits, and
+push the result.
+
+@item @code{rsh_signed} (0x0a): @var{a} @var{b} @result{} @var{@code{(signed)}a>>b}
+Pop two integers from the stack; let @var{a} be the next-to-top value,
+and @var{b} be the top value.  Shift @var{a} right by @var{b} bits,
+inserting copies of the top bit at the high end, and push the result.
+
+@item @code{rsh_unsigned} (0x0b): @var{a} @var{b} @result{} @var{a>>b}
+Pop two integers from the stack; let @var{a} be the next-to-top value,
+and @var{b} be the top value.  Shift @var{a} right by @var{b} bits,
+inserting zero bits at the high end, and push the result.
+
+@item @code{log_not} (0x0e): @var{a} @result{} @var{!a}
+Pop an integer from the stack; if it is zero, push the value one;
+otherwise, push the value zero.
+
+@item @code{bit_and} (0x0f): @var{a} @var{b} @result{} @var{a&b}
+Pop two integers from the stack, and push their bitwise @code{and}.
+
+@item @code{bit_or} (0x10): @var{a} @var{b} @result{} @var{a|b}
+Pop two integers from the stack, and push their bitwise @code{or}.
+
+@item @code{bit_xor} (0x11): @var{a} @var{b} @result{} @var{a^b}
+Pop two integers from the stack, and push their bitwise
+exclusive-@code{or}.
+
+@item @code{bit_not} (0x12): @var{a} @result{} @var{~a}
+Pop an integer from the stack, and push its bitwise complement.
+
+@item @code{equal} (0x13): @var{a} @var{b} @result{} @var{a=b}
+Pop two integers from the stack; if they are equal, push the value one;
+otherwise, push the value zero.
+
+@item @code{less_signed} (0x14): @var{a} @var{b} @result{} @var{a<b}
+Pop two signed integers from the stack; if the next-to-top value is less
+than the top value, push the value one; otherwise, push the value zero.
+
+@item @code{less_unsigned} (0x15): @var{a} @var{b} @result{} @var{a<b}
+Pop two unsigned integers from the stack; if the next-to-top value is less
+than the top value, push the value one; otherwise, push the value zero.
+
+@item @code{ext} (0x16) @var{n}: @var{a} @result{} @var{a}, sign-extended from @var{n} bits
+Pop an unsigned value from the stack; treating it as an @var{n}-bit
+twos-complement value, extend it to full length.  This means that all
+bits to the left of bit @var{n-1} (where the least significant bit is bit
+0) are set to the value of bit @var{n-1}.  Note that @var{n} may be
+larger than or equal to the width of the stack elements of the bytecode
+engine; in this case, the bytecode should have no effect.
+
+The number of source bits to preserve, @var{n}, is encoded as a single
+byte unsigned integer following the @code{ext} bytecode.
+
+@item @code{zero_ext} (0x2a) @var{n}: @var{a} @result{} @var{a}, zero-extended from @var{n} bits
+Pop an unsigned value from the stack; zero all but the bottom @var{n}
+bits.  This means that all bits to the left of bit @var{n-1} (where the
+least significant bit is bit 0) are set to the value of bit @var{n-1}.
+
+The number of source bits to preserve, @var{n}, is encoded as a single
+byte unsigned integer following the @code{zero_ext} bytecode.
+
+@item @code{ref8} (0x17): @var{addr} @result{} @var{a}
+@itemx @code{ref16} (0x18): @var{addr} @result{} @var{a}
+@itemx @code{ref32} (0x19): @var{addr} @result{} @var{a}
+@itemx @code{ref64} (0x1a): @var{addr} @result{} @var{a}
+Pop an address @var{addr} from the stack.  For bytecode
+@code{ref}@var{n}, fetch an @var{n}-bit value from @var{addr}, using the
+natural target endianness.  Push the fetched value as an unsigned
+integer.
+
+Note that @var{addr} may not be aligned in any particular way; the
+@code{ref@var{n}} bytecodes should operate correctly for any address.
+
+If attempting to access memory at @var{addr} would cause a processor
+exception of some sort, terminate with an error.
+
+@item @code{ref_float} (0x1b): @var{addr} @result{} @var{d}
+@itemx @code{ref_double} (0x1c): @var{addr} @result{} @var{d}
+@itemx @code{ref_long_double} (0x1d): @var{addr} @result{} @var{d}
+@itemx @code{l_to_d} (0x1e): @var{a} @result{} @var{d}
+@itemx @code{d_to_l} (0x1f): @var{d} @result{} @var{a}
+Not implemented yet.
+
+@item @code{dup} (0x28): @var{a} => @var{a} @var{a}
+Push another copy of the stack's top element.
+
+@item @code{swap} (0x2b): @var{a} @var{b} => @var{b} @var{a}
+Exchange the top two items on the stack.
+
+@item @code{pop} (0x29): @var{a} =>
+Discard the top value on the stack.
+
+@item @code{if_goto} (0x20) @var{offset}: @var{a} @result{}
+Pop an integer off the stack; if it is non-zero, branch to the given
+offset in the bytecode string.  Otherwise, continue to the next
+instruction in the bytecode stream.  In other words, if @var{a} is
+non-zero, set the @code{pc} register to @code{start} + @var{offset}.
+Thus, an offset of zero denotes the beginning of the expression.
+
+The @var{offset} is stored as a sixteen-bit unsigned value, stored
+immediately following the @code{if_goto} bytecode.  It is always stored
+most signficant byte first, regardless of the target's normal
+endianness.  The offset is not guaranteed to fall at any particular
+alignment within the bytecode stream; thus, on machines where fetching a
+16-bit on an unaligned address raises an exception, you should fetch the
+offset one byte at a time.
+
+@item @code{goto} (0x21) @var{offset}: @result{}
+Branch unconditionally to @var{offset}; in other words, set the
+@code{pc} register to @code{start} + @var{offset}.
+
+The offset is stored in the same way as for the @code{if_goto} bytecode.
+
+@item @code{const8} (0x22) @var{n}: @result{} @var{n}
+@itemx @code{const16} (0x23) @var{n}: @result{} @var{n}
+@itemx @code{const32} (0x24) @var{n}: @result{} @var{n}
+@itemx @code{const64} (0x25) @var{n}: @result{} @var{n}
+Push the integer constant @var{n} on the stack, without sign extension.
+To produce a small negative value, push a small twos-complement value,
+and then sign-extend it using the @code{ext} bytecode.
+
+The constant @var{n} is stored in the appropriate number of bytes
+following the @code{const}@var{b} bytecode.  The constant @var{n} is
+always stored most significant byte first, regardless of the target's
+normal endianness.  The constant is not guaranteed to fall at any
+particular alignment within the bytecode stream; thus, on machines where
+fetching a 16-bit on an unaligned address raises an exception, you
+should fetch @var{n} one byte at a time.
+
+@item @code{reg} (0x26) @var{n}: @result{} @var{a}
+Push the value of register number @var{n}, without sign extension.  The
+registers are numbered following GDB's conventions.
+
+The register number @var{n} is encoded as a 16-bit unsigned integer
+immediately following the @code{reg} bytecode.  It is always stored most
+signficant byte first, regardless of the target's normal endianness.
+The register number is not guaranteed to fall at any particular
+alignment within the bytecode stream; thus, on machines where fetching a
+16-bit on an unaligned address raises an exception, you should fetch the
+register number one byte at a time.
+
+@item @code{trace} (0x0c): @var{addr} @var{size} @result{}
+Record the contents of the @var{size} bytes at @var{addr} in a trace
+buffer, for later retrieval by GDB.
+
+@item @code{trace_quick} (0x0d) @var{size}: @var{addr} @result{} @var{addr}
+Record the contents of the @var{size} bytes at @var{addr} in a trace
+buffer, for later retrieval by GDB.  @var{size} is a single byte
+unsigned integer following the @code{trace} opcode.
+
+This bytecode is equivalent to the sequence @code{dup const8 @var{size}
+trace}, but we provide it anyway to save space in bytecode strings.
+
+@item @code{trace16} (0x30) @var{size}: @var{addr} @result{} @var{addr}
+Identical to trace_quick, except that @var{size} is a 16-bit big-endian
+unsigned integer, not a single byte.  This should probably have been
+named @code{trace_quick16}, for consistency.
+
+@item @code{end} (0x27): @result{}
+Stop executing bytecode; the result should be the top element of the
+stack.  If the purpose of the expression was to compute an lvalue or a
+range of memory, then the next-to-top of the stack is the lvalue's
+address, and the top of the stack is the lvalue's size, in bytes.
+
+@end table
+
+
+@node Using Agent Expressions
+@section Using Agent Expressions
+
+Here is a sketch of a full non-stop debugging cycle, showing how agent
+expressions fit into the process.
+
+@itemize @bullet
+
+@item
+The user selects trace points in the program's code at which GDB should
+collect data.
+
+@item
+The user specifies expressions to evaluate at each trace point.  These
+expressions may denote objects in memory, in which case those objects'
+contents are recorded as the program runs, or computed values, in which
+case the values themselves are recorded.
+
+@item
+GDB transmits the tracepoints and their associated expressions to the
+GDB agent, running on the debugging target.
+
+@item
+The agent arranges to be notified when a trace point is hit.  Note that,
+on some systems, the target operating system is completely responsible
+for collecting the data; see @ref{Tracing on Symmetrix}.
+
+@item
+When execution on the target reaches a trace point, the agent evaluates
+the expressions associated with that trace point, and records the
+resulting values and memory ranges.
+
+@item
+Later, when the user selects a given trace event and inspects the
+objects and expression values recorded, GDB talks to the agent to
+retrieve recorded data as necessary to meet the user's requests.  If the
+user asks to see an object whose contents have not been recorded, GDB
+reports an error.
+
+@end itemize
+
+
+@node Varying Target Capabilities
+@section Varying Target Capabilities
+
+Some targets don't support floating-point, and some would rather not
+have to deal with @code{long long} operations.  Also, different targets
+will have different stack sizes, and different bytecode buffer lengths.
+
+Thus, GDB needs a way to ask the target about itself.  We haven't worked
+out the details yet, but in general, GDB should be able to send the
+target a packet asking it to describe itself.  The reply should be a
+packet whose length is explicit, so we can add new information to the
+packet in future revisions of the agent, without confusing old versions
+of GDB, and it should contain a version number.  It should contain at
+least the following information:
+
+@itemize @bullet
+
+@item
+whether floating point is supported
+
+@item
+whether @code{long long} is supported
+
+@item
+maximum acceptable size of bytecode stack
+
+@item
+maximum acceptable length of bytecode expressions
+
+@item
+which registers are actually available for collection
+
+@item
+whether the target supports disabled tracepoints
+
+@end itemize
+
+
+
+@node Tracing on Symmetrix
+@section Tracing on Symmetrix
+
+This section documents the API used by the GDB agent to collect data on
+Symmetrix systems.
+
+Cygnus originally implemented these tracing features to help EMC
+Corporation debug their Symmetrix high-availability disk drives.  The
+Symmetrix application code already includes substantial tracing
+facilities; the GDB agent for the Symmetrix system uses those facilities
+for its own data collection, via the API described here.
+
+@deftypefn Function DTC_RESPONSE adbg_find_memory_in_frame (FRAME_DEF *@var{frame}, char *@var{address}, char **@var{buffer}, unsigned int *@var{size})
+Search the trace frame @var{frame} for memory saved from @var{address}.
+If the memory is available, provide the address of the buffer holding
+it; otherwise, provide the address of the next saved area.
+
+@itemize @bullet
+
+@item
+If the memory at @var{address} was saved in @var{frame}, set
+@code{*@var{buffer}} to point to the buffer in which that memory was
+saved, set @code{*@var{size}} to the number of bytes from @var{address}
+that are saved at @code{*@var{buffer}}, and return
+@code{OK_TARGET_RESPONSE}.  (Clearly, in this case, the function will
+always set @code{*@var{size}} to a value greater than zero.)
+
+@item
+If @var{frame} does not record any memory at @var{address}, set
+@code{*@var{size}} to the distance from @var{address} to the start of
+the saved region with the lowest address higher than @var{address}.  If
+there is no memory saved from any higher address, set @code{*@var{size}}
+to zero.  Return @code{NOT_FOUND_TARGET_RESPONSE}.
+@end itemize
+
+These two possibilities allow the caller to either retrieve the data, or
+walk the address space to the next saved area.
+@end deftypefn
+
+This function allows the GDB agent to map the regions of memory saved in
+a particular frame, and retrieve their contents efficiently.
+
+This function also provides a clean interface between the GDB agent and
+the Symmetrix tracing structures, making it easier to adapt the GDB
+agent to future versions of the Symmetrix system, and vice versa.  This
+function searches all data saved in @var{frame}, whether the data is
+there at the request of a bytecode expression, or because it falls in
+one of the format's memory ranges, or because it was saved from the top
+of the stack.  EMC can arbitrarily change and enhance the tracing
+mechanism, but as long as this function works properly, all collected
+memory is visible to GDB.
+
+The function itself is straightforward to implement.  A single pass over
+the trace frame's stack area, memory ranges, and expression blocks can
+yield the address of the buffer (if the requested address was saved),
+and also note the address of the next higher range of memory, to be
+returned when the search fails.
+
+As an example, suppose the trace frame @code{f} has saved sixteen bytes
+from address @code{0x8000} in a buffer at @code{0x1000}, and thirty-two
+bytes from address @code{0xc000} in a buffer at @code{0x1010}.  Here are
+some sample calls, and the effect each would have:
+
+@table @code
+
+@item adbg_find_memory_in_frame (f, (char*) 0x8000, &buffer, &size)
+This would set @code{buffer} to @code{0x1000}, set @code{size} to
+sixteen, and return @code{OK_TARGET_RESPONSE}, since @code{f} saves
+sixteen bytes from @code{0x8000} at @code{0x1000}.
+
+@item adbg_find_memory_in_frame (f, (char *) 0x8004, &buffer, &size)
+This would set @code{buffer} to @code{0x1004}, set @code{size} to
+twelve, and return @code{OK_TARGET_RESPONSE}, since @file{f} saves the
+twelve bytes from @code{0x8004} starting four bytes into the buffer at
+@code{0x1000}.  This shows that request addresses may fall in the middle
+of saved areas; the function should return the address and size of the
+remainder of the buffer.
+
+@item adbg_find_memory_in_frame (f, (char *) 0x8100, &buffer, &size)
+This would set @code{size} to @code{0x3f00} and return
+@code{NOT_FOUND_TARGET_RESPONSE}, since there is no memory saved in
+@code{f} from the address @code{0x8100}, and the next memory available
+is at @code{0x8100 + 0x3f00}, or @code{0xc000}.  This shows that request
+addresses may fall outside of all saved memory ranges; the function
+should indicate the next saved area, if any.
+
+@item adbg_find_memory_in_frame (f, (char *) 0x7000, &buffer, &size)
+This would set @code{size} to @code{0x1000} and return
+@code{NOT_FOUND_TARGET_RESPONSE}, since the next saved memory is at
+@code{0x7000 + 0x1000}, or @code{0x8000}.
+
+@item adbg_find_memory_in_frame (f, (char *) 0xf000, &buffer, &size)
+This would set @code{size} to zero, and return
+@code{NOT_FOUND_TARGET_RESPONSE}.  This shows how the function tells the
+caller that no further memory ranges have been saved.
+
+@end table
+
+As another example, here is a function which will print out the
+addresses of all memory saved in the trace frame @code{frame} on the
+Symmetrix INLINES console:
+@example
+void
+print_frame_addresses (FRAME_DEF *frame)
+@{
+  char *addr;
+  char *buffer;
+  unsigned long size;
+
+  addr = 0;
+  for (;;)
+    @{
+      /* Either find out how much memory we have here, or discover
+         where the next saved region is.  */
+      if (adbg_find_memory_in_frame (frame, addr, &buffer, &size)
+          == OK_TARGET_RESPONSE)
+        printp ("saved %x to %x\n", addr, addr + size);
+      if (size == 0)
+        break;
+      addr += size;
+    @}
+@}
+@end example
+
+Note that there is not necessarily any connection between the order in
+which the data is saved in the trace frame, and the order in which
+@code{adbg_find_memory_in_frame} will return those memory ranges.  The
+code above will always print the saved memory regions in order of
+increasing address, while the underlying frame structure might store the
+data in a random order.
+
+[[This section should cover the rest of the Symmetrix functions the stub
+relies upon, too.]]
+
+@node Rationale
+@section Rationale
+
+Some of the design decisions apparent above are arguable.
+
+@table @b
+
+@item What about stack overflow/underflow?
+GDB should be able to query the target to discover its stack size.
+Given that information, GDB can determine at translation time whether a
+given expression will overflow the stack.  But this spec isn't about
+what kinds of error-checking GDB ought to do.
+
+@item Why are you doing everything in LONGEST?
+
+Speed isn't important, but agent code size is; using LONGEST brings in a
+bunch of support code to do things like division, etc.  So this is a
+serious concern.
+
+First, note that you don't need different bytecodes for different
+operand sizes.  You can generate code without @emph{knowing} how big the
+stack elements actually are on the target.  If the target only supports
+32-bit ints, and you don't send any 64-bit bytecodes, everything just
+works.  The observation here is that the MIPS and the Alpha have only
+fixed-size registers, and you can still get C's semantics even though
+most instructions only operate on full-sized words.  You just need to
+make sure everything is properly sign-extended at the right times.  So
+there is no need for 32- and 64-bit variants of the bytecodes.  Just
+implement everything using the largest size you support.
+
+GDB should certainly check to see what sizes the target supports, so the
+user can get an error earlier, rather than later.  But this information
+is not necessary for correctness.
+
+
+@item Why don't you have @code{>} or @code{<=} operators?
+I want to keep the interpreter small, and we don't need them.  We can
+combine the @code{less_} opcodes with @code{log_not}, and swap the order
+of the operands, yielding all four asymmetrical comparison operators.
+For example, @code{(x <= y)} is @code{! (x > y)}, which is @code{! (y <
+x)}.
+
+@item Why do you have @code{log_not}?
+@itemx Why do you have @code{ext}?
+@itemx Why do you have @code{zero_ext}?
+These are all easily synthesized from other instructions, but I expect
+them to be used frequently, and they're simple, so I include them to
+keep bytecode strings short.
+
+@code{log_not} is equivalent to @code{const8 0 equal}; it's used in half
+the relational operators.
+
+@code{ext @var{n}} is equivalent to @code{const8 @var{s-n} lsh const8
+@var{s-n} rsh_signed}, where @var{s} is the size of the stack elements;
+it follows @code{ref@var{m}} and @var{reg} bytecodes when the value
+should be signed.  See the next bulleted item.
+
+@code{zero_ext @var{n}} is equivalent to @code{const@var{m} @var{mask}
+log_and}; it's used whenever we push the value of a register, because we
+can't assume the upper bits of the register aren't garbage.
+
+@item Why not have sign-extending variants of the @code{ref} operators?
+Because that would double the number of @code{ref} operators, and we
+need the @code{ext} bytecode anyway for accessing bitfields.
+
+@item Why not have constant-address variants of the @code{ref} operators?
+Because that would double the number of @code{ref} operators again, and
+@code{const32 @var{address} ref32} is only one byte longer.
+
+@item Why do the @code{ref@var{n}} operators have to support unaligned fetches?
+GDB will generate bytecode that fetches multi-byte values at unaligned
+addresses whenever the executable's debugging information tells it to.
+Furthermore, GDB does not know the value the pointer will have when GDB
+generates the bytecode, so it cannot determine whether a particular
+fetch will be aligned or not.
+
+In particular, structure bitfields may be several bytes long, but follow
+no alignment rules; members of packed structures are not necessarily
+aligned either.
+
+In general, there are many cases where unaligned references occur in
+correct C code, either at the programmer's explicit request, or at the
+compiler's discretion.  Thus, it is simpler to make the GDB agent
+bytecodes work correctly in all circumstances than to make GDB guess in
+each case whether the compiler did the usual thing.
+
+@item Why are there no side-effecting operators?
+Because our current client doesn't want them?  That's a cheap answer.  I
+think the real answer is that I'm afraid of implementing function
+calls.  We should re-visit this issue after the present contract is
+delivered.
+
+@item Why aren't the @code{goto} ops PC-relative?
+The interpreter has the base address around anyway for PC bounds
+checking, and it seemed simpler.
+
+@item Why is there only one offset size for the @code{goto} ops?
+Offsets are currently sixteen bits.  I'm not happy with this situation
+either:
+
+Suppose we have multiple branch ops with different offset sizes.  As I
+generate code left-to-right, all my jumps are forward jumps (there are
+no loops in expressions), so I never know the target when I emit the
+jump opcode.  Thus, I have to either always assume the largest offset
+size, or do jump relaxation on the code after I generate it, which seems
+like a big waste of time.
+
+I can imagine a reasonable expression being longer than 256 bytes.  I
+can't imagine one being longer than 64k.  Thus, we need 16-bit offsets.
+This kind of reasoning is so bogus, but relaxation is pathetic.
+
+The other approach would be to generate code right-to-left.  Then I'd
+always know my offset size.  That might be fun.
+
+@item Where is the function call bytecode?
+
+When we add side-effects, we should add this.
+
+@item Why does the @code{reg} bytecode take a 16-bit register number?
+
+Intel's IA64-architecture, Merced, has 128 general-purpose registers,
+and 128 floating-point registers, and I'm sure it has some random
+control registers.
+
+@item Why do we need @code{trace} and @code{trace_quick}?
+Because GDB needs to record all the memory contents and registers an
+expression touches.  If the user wants to evaluate an expression
+@code{x->y->z}, the agent must record the values of @code{x} and
+@code{x->y} as well as the value of @code{x->y->z}.
+
+@item Don't the @code{trace} bytecodes make the interpreter less general?
+They do mean that the interpreter contains special-purpose code, but
+that doesn't mean the interpreter can only be used for that purpose.  If
+an expression doesn't use the @code{trace} bytecodes, they don't get in
+its way.
+
+@item Why doesn't @code{trace_quick} consume its arguments the way everything else does?
+In general, you do want your operators to consume their arguments; it's
+consistent, and generally reduces the amount of stack rearrangement
+necessary.  However, @code{trace_quick} is a kludge to save space; it
+only exists so we needn't write @code{dup const8 @var{SIZE} trace}
+before every memory reference.  Therefore, it's okay for it not to
+consume its arguments; it's meant for a specific context in which we
+know exactly what it should do with the stack.  If we're going to have a
+kludge, it should be an effective kludge.
+
+@item Why does @code{trace16} exist?
+That opcode was added by the customer that contracted Cygnus for the
+data tracing work.  I personally think it is unnecessary; objects that
+large will be quite rare, so it is okay to use @code{dup const16
+@var{size} trace} in those cases.
+
+Whatever we decide to do with @code{trace16}, we should at least leave
+opcode 0x30 reserved, to remain compatible with the customer who added
+it.
+
+@end table
+
+@bye
diff --git a/gdb/doc/all-cfg.texi b/gdb/doc/all-cfg.texi
new file mode 100644
index 0000000..74d8090
--- /dev/null
+++ b/gdb/doc/all-cfg.texi
@@ -0,0 +1,112 @@
+@c GDB MANUAL configuration file.  
+@c Copyright (c) 1993 Free Software Foundation, Inc.
+@c
+@c NOTE: While the GDB manual is configurable (by changing these
+@c switches), its configuration is ***NOT*** automatically tied in to
+@c source configuration---because the authors expect that, save in
+@c unusual cases, the most inclusive form of the manual is appropriate
+@c no matter how the program itself is configured.
+@c
+@c The only automatically-varying variable is the GDB version number,
+@c which the Makefile rewrites based on the VERSION variable from
+@c `../Makefile.in'.  
+@c 
+@c GDB version number is recorded in the variable GDBVN
+@include GDBvn.texi
+@c
+@c ----------------------------------------------------------------------
+@c PLATFORM FLAGS:
+@set GENERIC
+@c
+@c HP PA-RISC target ONLY:
+@clear HPPA
+@c
+@c Hitachi H8/300 target:
+@set H8
+@c Hitachi H8/300 target ONLY:
+@clear H8EXCLUSIVE
+@c
+@c remote MIPS target:
+@set MIPS
+@c
+@c SPARC target:
+@set SPARC
+@set SPARCLET
+@c
+@c AMD 29000 target:
+@set AMD29K
+@c
+@c Intel 960 target:
+@set I960
+@c
+@c Tandem ST2000 (phone switch) target:
+@set ST2000
+@c
+@c Zilog 8000 target:
+@set Z8K
+@c
+@c Wind River Systems VxWorks environment:
+@set VXWORKS
+@c
+@c ----------------------------------------------------------------------
+@c DOC FEATURE FLAGS:
+@c 
+@c Bare-board target?
+@clear BARETARGET
+@c
+@c Restrict languages discussed to C?
+@c This is backward.  As time permits, change this to language-specific
+@c switches for what to include.
+@clear CONLY
+@c Discuss Fortran?
+@set FORTRAN
+@c
+@c Discuss Modula 2?
+@set MOD2
+@c
+@c Specifically for host machine running DOS?
+@clear DOSHOST
+@c
+@c Talk about CPU simulator targets?
+@set SIMS
+@c
+@c Remote serial line settings of interest?
+@set SERIAL
+@c
+@c Discuss features requiring Posix or similar OS environment?
+@set POSIX
+@c
+@c Discuss remote serial debugging stub?
+@set REMOTESTUB
+@c
+@c Discuss gdbserver?
+@set GDBSERVER
+@c
+@c Discuss gdbserve.nlm?
+@set GDBSERVE
+@c
+@c Refrain from discussing how to configure sw and format doc?
+@clear PRECONFIGURED
+@c
+@c Refrain from referring to unfree publications?
+@set FSFDOC
+@c
+@c ----------------------------------------------------------------------
+@c STRINGS:
+@c
+@c Name of GDB program.  Used also for (gdb) prompt string.
+@set GDBP gdb
+@c 
+@c Name of GDB product.  Used in running text.
+@set GDBN GDB
+@c
+@c Name of host.  Should not be used in generic configs, but generic
+@c value may catch some flubs.
+@set HOST machine specific
+@c
+@c Name of GCC product
+@set NGCC GCC
+@c 
+@c Name of GCC program
+@set GCC gcc
+
diff --git a/gdb/doc/annotate.texi b/gdb/doc/annotate.texi
new file mode 100644
index 0000000..9d5850d
--- /dev/null
+++ b/gdb/doc/annotate.texi
@@ -0,0 +1,717 @@
+\input texinfo   @c -*-texinfo-*-
+@c %**start of header
+@setfilename annotate.info
+@settitle GDB Annotations
+@setchapternewpage off
+@c %**end of header
+
+@set EDITION 0.5
+@set DATE May 1994
+
+@ifinfo
+This file documents GDB annotations.
+
+This is Edition @value{EDITION}, @value{DATE}, of @cite{GDB
+Annotations}.  Copyright 1994 Free Software Foundation
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ifinfo
+
+@titlepage
+@title GDB Annotations
+@subtitle Edition @value{EDITION}
+@subtitle @value{DATE}
+@author Cygnus Support
+@page
+@vskip 0pt plus 1filll
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+Copyright @copyright{} 1994 Free Software Foundation
+@end titlepage
+
+@ifinfo
+@node Top
+@top GDB Annotations
+
+This file describes annotations in GDB, the GNU symbolic debugger.
+Annotations are designed to interface GDB to graphical user interfaces
+or other similar programs which want to interact with GDB at a
+relatively high level.
+
+This is Edition @value{EDITION}, @value{DATE}.
+
+@menu
+* General::             What annotations are; the general syntax.
+* Server::              Issuing a command without affecting user state.
+* Values::              Values are marked as such.
+* Frames::              Stack frames are annotated.
+* Displays::            GDB can be told to display something periodically.
+* Prompting::           Annotations marking GDB's need for input.
+* Errors::              Annotations for error messages.
+* Breakpoint Info::     Information on breakpoints.
+* Invalidation::        Some annotations describe things now invalid.
+* Running::             Whether the program is running, how it stopped, etc.
+* Source::              Annotations describing source code.
+* TODO::                Annotations which might be added in the future.
+* Index::               Index
+@end menu
+@end ifinfo
+
+@node General
+@chapter What is an Annotation?
+
+To produce annotations, start GDB with the @code{--annotate=2} option.
+
+Annotations start with a newline character, two @samp{control-z}
+characters, and the name of the annotation.  If there is no additional
+information associated with this annotation, the name of the annotation
+is followed immediately by a newline.  If there is additional
+information, the name of the annotation is followed by a space, the
+additional information, and a newline.  The additional information
+cannot contain newline characters.
+
+Any output not beginning with a newline and two @samp{control-z}
+characters denotes literal output from GDB.  Currently there is no need
+for GDB to output a newline followed by two @samp{control-z} characters,
+but if there was such a need, the annotations could be extended with an
+@samp{escape} annotation which means those three characters as output.
+
+A simple example of starting up GDB with annotations is:
+
+@example
+$ gdb --annotate=2
+GDB is free software and you are welcome to distribute copies of it
+ under certain conditions; type "show copying" to see the conditions.
+There is absolutely no warranty for GDB; type "show warranty" for details.
+GDB 4.12.3 (sparc-sun-sunos4.1.3), 
+Copyright 1994 Free Software Foundation, Inc.
+
+^Z^Zpre-prompt
+(gdb) 
+^Z^Zprompt
+quit
+
+^Z^Zpost-prompt
+$ 
+@end example
+
+Here @samp{quit} is input to GDB; the rest is output from GDB.  The three
+lines beginning @samp{^Z^Z} (where @samp{^Z} denotes a @samp{control-z}
+character) are annotations; the rest is output from GDB.
+
+@node Server
+@chapter The Server Prefix
+
+To issue a command to GDB without affecting certain aspects of the state
+which is seen by users, prefix it with @samp{server }.  This means that
+this command will not affect the command history, nor will it affect
+GDB's notion of which command to repeat if @key{RET} is pressed on a
+line by itself.
+
+The server prefix does not affect the recording of values into the value
+history; to print a value without recording it into the value history,
+use the @code{output} command instead of the @code{print} command.
+
+@node Values
+@chapter Values
+
+When a value is printed in various contexts, GDB uses annotations to
+delimit the value from the surrounding text.
+
+@findex value-history-begin
+@findex value-history-value
+@findex value-history-end
+If a value is printed using @code{print} and added to the value history,
+the annotation looks like
+
+@example
+^Z^Zvalue-history-begin @var{history-number} @var{value-flags}
+@var{history-string}
+^Z^Zvalue-history-value
+@var{the-value}
+^Z^Zvalue-history-end
+@end example
+
+where @var{history-number} is the number it is getting in the value
+history, @var{history-string} is a string, such as @samp{$5 = }, which
+introduces the value to the user, @var{the-value} is the output
+corresponding to the value itself, and @var{value-flags} is @samp{*} for
+a value which can be dereferenced and @samp{-} for a value which cannot.
+
+@findex value-begin
+@findex value-end
+If the value is not added to the value history (it is an invalid float
+or it is printed with the @code{output} command), the annotation is similar:
+
+@example
+^Z^Zvalue-begin @var{value-flags}
+@var{the-value}
+^Z^Zvalue-end
+@end example
+
+@findex arg-begin
+@findex arg-name-end
+@findex arg-value
+@findex arg-end
+When GDB prints an argument to a function (for example, in the output
+from the @code{backtrace} command), it annotates it as follows:
+
+@example
+^Z^Zarg-begin
+@var{argument-name}
+^Z^Zarg-name-end
+@var{separator-string}
+^Z^Zarg-value @var{value-flags}
+@var{the-value}
+^Z^Zarg-end
+@end example
+
+where @var{argument-name} is the name of the argument,
+@var{separator-string} is text which separates the name from the value
+for the user's benefit (such as @samp{=}), and @var{value-flags} and
+@var{the-value} have the same meanings as in a
+@code{value-history-begin} annotation.
+
+@findex field-begin
+@findex field-name-end
+@findex field-value
+@findex field-end
+When printing a structure, GDB annotates it as follows:
+
+@example
+^Z^Zfield-begin @var{value-flags}
+@var{field-name}
+^Z^Zfield-name-end
+@var{separator-string}
+^Z^Zfield-value
+@var{the-value}
+^Z^Zfield-end
+@end example
+
+where @var{field-name} is the name of the field, @var{separator-string}
+is text which separates the name from the value for the user's benefit
+(such as @samp{=}), and @var{value-flags} and @var{the-value} have the
+same meanings as in a @code{value-history-begin} annotation.
+
+When printing an array, GDB annotates it as follows:
+
+@example
+^Z^Zarray-section-begin @var{array-index} @var{value-flags}
+@end example
+
+where @var{array-index} is the index of the first element being
+annotated and @var{value-flags} has the same meaning as in a
+@code{value-history-begin} annotation.  This is followed by any number
+of elements, where is element can be either a single element:
+
+@findex elt
+@example
+@samp{,} @var{whitespace}         ; @r{omitted for the first element}
+@var{the-value}
+^Z^Zelt
+@end example
+
+or a repeated element
+
+@findex elt-rep
+@findex elt-rep-end
+@example
+@samp{,} @var{whitespace}         ; @r{omitted for the first element}
+@var{the-value}
+^Z^Zelt-rep @var{number-of-repititions}
+@var{repetition-string}
+^Z^Zelt-rep-end
+@end example
+
+In both cases, @var{the-value} is the output for the value of the
+element and @var{whitespace} can contain spaces, tabs, and newlines.  In
+the repeated case, @var{number-of-repititons} is the number of
+consecutive array elements which contain that value, and
+@var{repetition-string} is a string which is designed to convey to the
+user that repitition is being depicted.
+
+@findex array-section-end
+Once all the array elements have been output, the array annotation is
+ended with
+
+@example
+^Z^Zarray-section-end
+@end example
+
+@node Frames
+@chapter Frames
+
+Whenever GDB prints a frame, it annotates it.  For example, this applies
+to frames printed when GDB stops, output from commands such as
+@code{backtrace} or @code{up}, etc.
+
+@findex frame-begin
+The frame annotation begins with
+
+@example
+^Z^Zframe-begin @var{level} @var{address}
+@var{level-string}
+@end example
+
+where @var{level} is the number of the frame (0 is the innermost frame,
+and other frames have positive numbers), @var{address} is the address of
+the code executing in that frame, and @var{level-string} is a string
+designed to convey the level to the user.  @var{address} is in the form
+@samp{0x} followed by one or more lowercase hex digits (note that this
+does not depend on the language).  The frame ends with
+
+@findex frame-end
+@example
+^Z^Zframe-end
+@end example
+
+Between these annotations is the main body of the frame, which can
+consist of
+
+@itemize @bullet
+@item
+@findex function-call
+@example
+^Z^Zfunction-call
+@var{function-call-string}
+@end example
+
+where @var{function-call-string} is text designed to convey to the user
+that this frame is associated with a function call made by GDB to a
+function in the program being debugged.
+
+@item
+@findex signal-handler-caller
+@example
+^Z^Zsignal-handler-caller
+@var{signal-handler-caller-string}
+@end example
+
+where @var{signal-handler-caller-string} is text designed to convey to
+the user that this frame is associated with whatever mechanism is used
+by this operating system to call a signal handler (it is the frame which
+calls the signal handler, not the frame for the signal handler itself).
+
+@item
+A normal frame.
+
+@findex frame-address
+@findex frame-address-end
+This can optionally (depending on whether this is thought of as
+interesting information for the user to see) begin with
+
+@example
+^Z^Zframe-address
+@var{address}
+^Z^Zframe-address-end
+@var{separator-string}
+@end example
+
+where @var{address} is the address executing in the frame (the same
+address as in the @code{frame-begin} annotation, but printed in a form
+which is intended for user consumption---in particular, the syntax varies
+depending on the language), and @var{separator-string} is a string
+intended to separate this address from what follows for the user's
+benefit.
+
+@findex frame-function-name
+@findex frame-args
+Then comes
+
+@example
+^Z^Zframe-function-name
+@var{function-name}
+^Z^Zframe-args
+@var{arguments}
+@end example
+
+where @var{function-name} is the name of the function executing in the
+frame, or @samp{??} if not known, and @var{arguments} are the arguments
+to the frame, with parentheses around them (each argument is annotated
+individually as well @pxref{Values}).
+
+@findex frame-source-begin
+@findex frame-source-file
+@findex frame-source-file-end
+@findex frame-source-line
+@findex frame-source-end
+If source information is available, a reference to it is then printed:
+
+@example
+^Z^Zframe-source-begin
+@var{source-intro-string}
+^Z^Zframe-source-file
+@var{filename}
+^Z^Zframe-source-file-end
+:
+^Z^Zframe-source-line
+@var{line-number}
+^Z^Zframe-source-end
+@end example
+
+where @var{source-intro-string} separates for the user's benefit the
+reference from the text which precedes it, @var{filename} is the name of
+the source file, and @var{line-number} is the line number within that
+file (the first line is line 1).
+
+@findex frame-where
+If GDB prints some information about where the frame is from (which
+library, which load segment, etc.; currently only done on the RS/6000),
+it is annotated with
+
+@example
+^Z^Zframe-where
+@var{information}
+@end example
+
+Then, if source is to actually be displayed for this frame (for example,
+this is not true for output from the @code{backtrace} command), then a
+@code{source} annotation (@pxref{Source}) is displayed.  Unlike most
+annotations, this is output instead of the normal text which would be
+output, not in addition.
+@end itemize
+
+@node Displays
+@chapter Displays
+
+@findex display-begin
+@findex display-number-end
+@findex display-format
+@findex display-expression
+@findex display-expression-end
+@findex display-value
+@findex display-end
+When GDB is told to display something using the @code{display} command,
+the results of the display are annotated:
+
+@example
+^Z^Zdisplay-begin
+@var{number}
+^Z^Zdisplay-number-end
+@var{number-separator}
+^Z^Zdisplay-format
+@var{format}
+^Z^Zdisplay-expression
+@var{expression}
+^Z^Zdisplay-expression-end
+@var{expression-separator}
+^Z^Zdisplay-value
+@var{value}
+^Z^Zdisplay-end
+@end example
+
+where @var{number} is the number of the display, @var{number-separator}
+is intended to separate the number from what follows for the user,
+@var{format} includes information such as the size, format, or other
+information about how the value is being displayed, @var{expression} is
+the expression being displayed, @var{expression-separator} is intended
+to separate the expression from the text that follows for the user,
+and @var{value} is the actual value being displayed.
+
+@node Prompting
+@chapter Annotation for GDB Input
+
+When GDB prompts for input, it annotates this fact so it is possible
+to know when to send output, when the output from a given command is
+over, etc.
+
+Different kinds of input each have a different @dfn{input type}.  Each
+input type has three annotations: a @code{pre-} annotation, which
+denotes the beginning of any prompt which is being output, a plain
+annotation, which denotes the end of the prompt, and then a @code{post-}
+annotation which denotes the end of any echo which may (or may not) be
+associated with the input.  For example, the @code{prompt} input type
+features the following annotations:
+
+@example
+^Z^Zpre-prompt
+^Z^Zprompt
+^Z^Zpost-prompt
+@end example
+
+The input types are
+
+@table @code
+@findex pre-prompt
+@findex prompt
+@findex post-prompt
+@item prompt
+When GDB is prompting for a command (the main GDB prompt).
+
+@findex pre-commands
+@findex commands
+@findex post-commands
+@item commands
+When GDB prompts for a set of commands, like in the @code{commands}
+command.  The annotations are repeated for each command which is input.
+
+@findex pre-overload-choice
+@findex overload-choice
+@findex post-overload-choice
+@item overload-choice
+When GDB wants the user to select between various overloaded functions.
+
+@findex pre-query
+@findex query
+@findex post-query
+@item query
+When GDB wants the user to confirm a potentially dangerous operation.
+
+@findex pre-prompt-for-continue
+@findex prompt-for-continue
+@findex post-prompt-for-continue
+@item prompt-for-continue
+When GDB is asking the user to press return to continue.  Note: Don't
+expect this to work well; instead use @code{set height 0} to disable
+prompting.  This is because the counting of lines is buggy in the
+presence of annotations.
+@end table
+
+@node Errors
+@chapter Errors
+
+@findex quit
+@example
+^Z^Zquit
+@end example
+
+This annotation occurs right before GDB responds to an interrupt.
+
+@findex error
+@example
+^Z^Zerror
+@end example
+
+This annotation occurs right before GDB responds to an error.
+
+Quit and error annotations indicate that any annotations which GDB was
+in the middle of may end abruptly.  For example, if a
+@code{value-history-begin} annotation is followed by a @code{error}, one
+cannot expect to receive the matching @code{value-history-end}.  One
+cannot expect not to receive it either, however; an error annotation
+does not necessarily mean that GDB is immediately returning all the way
+to the top level.
+
+@findex error-begin
+A quit or error annotation may be preceded by
+
+@example
+^Z^Zerror-begin
+@end example
+
+Any output between that and the quit or error annotation is the error
+message.
+
+Warning messages are not yet annotated.
+@c If we want to change that, need to fix warning(), type_error(),
+@c range_error(), and possibly other places.
+
+@node Breakpoint Info
+@chapter Information on Breakpoints
+
+The output from the @code{info breakpoints} command is annotated as follows:
+
+@findex breakpoints-headers
+@findex breakpoints-table
+@example
+^Z^Zbreakpoints-headers
+@var{header-entry}
+^Z^Zbreakpoints-table
+@end example
+
+where @var{header-entry} has the same syntax as an entry (see below) but
+instead of containing data, it contains strings which are intended to
+convey the meaning of each field to the user.  This is followed by any
+number of entries.  If a field does not apply for this entry, it is
+omitted.  Fields may contain trailing whitespace.  Each entry consists
+of:
+
+@findex record
+@findex field
+@example
+^Z^Zrecord
+^Z^Zfield 0
+@var{number}
+^Z^Zfield 1
+@var{type}
+^Z^Zfield 2
+@var{disposition}
+^Z^Zfield 3
+@var{enable}
+^Z^Zfield 4
+@var{address}
+^Z^Zfield 5
+@var{what}
+^Z^Zfield 6
+@var{frame}
+^Z^Zfield 7
+@var{condition}
+^Z^Zfield 8
+@var{ignore-count}
+^Z^Zfield 9
+@var{commands}
+@end example
+
+Note that @var{address} is intended for user consumption---the syntax
+varies depending on the language.
+
+The output ends with
+
+@findex breakpoints-table-end
+@example
+^Z^Zbreakpoints-table-end
+@end example
+
+@node Invalidation
+@chapter Invalidation Notices
+
+The following annotations say that certain pieces of state may have
+changed.
+
+@table @code
+@findex frames-invalid
+@item ^Z^Zframes-invalid
+
+The frames (for example, output from the @code{backtrace} command) may
+have changed.
+
+@findex breakpoints-invalid
+@item ^Z^Zbreakpoints-invalid
+
+The breakpoints may have changed.  For example, the user just added or
+deleted a breakpoint.
+@end table
+
+@node Running
+@chapter Running the Program
+
+@findex starting
+@findex stopping
+When the program starts executing due to a GDB command such as
+@code{step} or @code{continue}, 
+
+@example
+^Z^Zstarting
+@end example
+
+is output.  When the program stops, 
+
+@example
+^Z^Zstopped
+@end example
+
+is output.  Before the @code{stopped} annotation, a variety of
+annotations describe how the program stopped.
+
+@table @code
+@findex exited
+@item ^Z^Zexited @var{exit-status}
+The program exited, and @var{exit-status} is the exit status (zero for
+successful exit, otherwise nonzero).
+
+@findex signalled
+@findex signal-name
+@findex signal-name-end
+@findex signal-string
+@findex signal-string-end
+@item ^Z^Zsignalled
+The program exited with a signal.  After the @code{^Z^Zsignalled}, the
+annotation continues:
+
+@example
+@var{intro-text}
+^Z^Zsignal-name
+@var{name}
+^Z^Zsignal-name-end
+@var{middle-text}
+^Z^Zsignal-string
+@var{string}
+^Z^Zsignal-string-end
+@var{end-text}
+@end example
+
+where @var{name} is the name of the signal, such as @code{SIGILL} or
+@code{SIGSEGV}, and @var{string} is the explanation of the signal, such
+as @code{Illegal Instruction} or @code{Segmentation fault}.
+@var{intro-text}, @var{middle-text}, and @var{end-text} are for the
+user's benefit and have no particular format.
+
+@findex signal
+@item ^Z^Zsignal
+The syntax of this annotation is just like @code{signalled}, but GDB is
+just saying that the program received the signal, not that it was
+terminated with it.
+
+@findex breakpoint
+@item ^Z^Zbreakpoint @var{number}
+The program hit breakpoint number @var{number}.
+
+@findex watchpoint
+@item ^Z^Zwatchpoint @var{number}
+The program hit watchpoint number @var{number}.
+@end table
+
+@node Source
+@chapter Displaying Source
+
+@findex source
+The following annotation is used instead of displaying source code:
+
+@example
+^Z^Zsource @var{filename}:@var{line}:@var{character}:@var{middle}:@var{addr}
+@end example
+
+where @var{filename} is an absolute file name indicating which source
+file, @var{line} is the line number within that file (where 1 is the
+first line in the file), @var{character} is the character position
+within the file (where 0 is the first character in the file) (for most
+debug formats this will necessarily point to the beginning of a line),
+@var{middle} is @samp{middle} if @var{addr} is in the middle of the
+line, or @samp{beg} if @var{addr} is at the beginning of the line, and
+@var{addr} is the address in the target program associated with the
+source which is being displayed.  @var{addr} is in the form @samp{0x}
+followed by one or more lowercase hex digits (note that this does not
+depend on the language).
+
+@node TODO
+@chapter Annotations We Might Want in the Future
+
+@format
+    - target-invalid
+      the target might have changed (registers, heap contents, or
+      execution status).  For performance, we might eventually want
+      to hit `registers-invalid' and `all-registers-invalid' with
+      greater precision
+
+    - systematic annotation for set/show parameters (including
+      invalidation notices).
+
+    - similarly, `info' returns a list of candidates for invalidation
+      notices.
+@end format
+
+@node Index
+@unnumbered Index
+
+@printindex fn
+
+@bye
diff --git a/gdb/doc/configure b/gdb/doc/configure
new file mode 100755
index 0000000..8c5591c
--- /dev/null
+++ b/gdb/doc/configure
@@ -0,0 +1,862 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.2 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.2"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=refcard.tex
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:556: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/doc/configure.in b/gdb/doc/configure.in
new file mode 100644
index 0000000..460efc2
--- /dev/null
+++ b/gdb/doc/configure.in
@@ -0,0 +1,4 @@
+AC_PREREQ(2.12.1)
+AC_INIT(refcard.tex)
+AC_PROG_INSTALL
+AC_OUTPUT(Makefile)
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
new file mode 100644
index 0000000..fc920bb
--- /dev/null
+++ b/gdb/doc/gdb.texinfo
@@ -0,0 +1,10316 @@
+\input texinfo      @c -*-texinfo-*-
+@c Copyright 1988-1999
+@c Free Software Foundation, Inc.
+@c
+@c %**start of header 
+@c makeinfo ignores cmds prev to setfilename, so its arg cannot make use
+@c of @set vars.  However, you can override filename with makeinfo -o.
+@setfilename gdb.info
+@c
+@include gdb-cfg.texi
+@c
+@ifset GENERIC
+@settitle Debugging with @value{GDBN}
+@end ifset
+@ifclear GENERIC
+@settitle Debugging with @value{GDBN} (@value{TARGET})
+@end ifclear
+@setchapternewpage odd
+@c %**end of header
+
+@iftex
+@c @smallbook
+@c @cropmarks
+@end iftex
+
+@finalout
+@syncodeindex ky cp
+
+@c readline appendices use @vindex
+@syncodeindex vr cp
+
+@c !!set GDB manual's edition---not the same as GDB version!
+@set EDITION Seventh
+
+@c !!set GDB manual's revision date
+@set DATE February 1999
+
+@c THIS MANUAL REQUIRES TEXINFO-2 macros and info-makers to format properly.
+
+@ifinfo
+@c This is a dir.info fragment to support semi-automated addition of
+@c manuals to an info tree.  zoo@cygnus.com is developing this facility.
+@format
+START-INFO-DIR-ENTRY
+* Gdb: (gdb).                     The @sc{gnu} debugger.
+END-INFO-DIR-ENTRY
+@end format
+@end ifinfo
+@c
+@c
+@ifinfo
+This file documents the @sc{gnu} debugger @value{GDBN}.
+
+
+This is the @value{EDITION} Edition, @value{DATE}, 
+of @cite{Debugging with @value{GDBN}: the @sc{gnu} Source-Level Debugger}
+for @value{GDBN} Version @value{GDBVN}.
+
+Copyright (C) 1988-1999 Free Software Foundation, Inc.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ifinfo
+
+@titlepage
+@title Debugging with @value{GDBN}
+@subtitle The @sc{gnu} Source-Level Debugger
+@ifclear GENERIC
+@subtitle (@value{TARGET})
+@end ifclear
+@sp 1
+@ifclear HPPA
+@subtitle @value{EDITION} Edition, for @value{GDBN} version @value{GDBVN}
+@subtitle @value{DATE}
+@author Richard M. Stallman and Roland H. Pesch
+@end ifclear
+@ifset HPPA
+@subtitle Edition @value{EDITION}, for @value{HPVER} (based on @value{GDBN} @value{GDBVN})
+@subtitle @value{DATE}
+@author Richard M. Stallman and Roland H. Pesch (modified by HP)
+@end ifset
+@page
+@ifclear HPPA
+@tex
+{\parskip=0pt
+\hfill (Send bugs and comments on @value{GDBN} to bug-gdb\@prep.ai.mit.edu.)\par
+\hfill {\it Debugging with @value{GDBN}}\par
+\hfill \TeX{}info \texinfoversion\par
+}
+@end tex
+@end ifclear
+@ifset HPPA
+@tex
+{\parskip=0pt
+\hfill {\it Debugging with @value{GDBN}}\par
+\hfill \TeX{}info \texinfoversion\par
+}
+@end tex
+@end ifset
+
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1988-1999 Free Software Foundation, Inc. 
+@sp 2
+@ifclear HPPA
+Published by the Free Software Foundation @*
+59 Temple Place - Suite 330, @*
+Boston, MA 02111-1307 USA @*
+Printed copies are available for $20 each. @*
+ISBN 1-882114-11-6 @*
+@end ifclear
+                
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end titlepage
+@page
+
+@ifinfo
+@node Top, Summary, (dir), (dir)
+@top Debugging with @value{GDBN}
+
+This file describes @value{GDBN}, the @sc{gnu} symbolic debugger.
+
+This is the @value{EDITION} Edition, @value{DATE}, for @value{GDBN} Version 
+@value{GDBVN}.
+
+Copyright (C) 1988-1999 Free Software Foundation, Inc.
+@menu
+* Summary::                     Summary of @value{GDBN}
+@ifclear BARETARGET
+* Sample Session::              A sample @value{GDBN} session
+@end ifclear
+
+* Invocation::                  Getting in and out of @value{GDBN}
+* Commands::                    @value{GDBN} commands
+* Running::                     Running programs under @value{GDBN}
+* Stopping::                    Stopping and continuing
+* Stack::                       Examining the stack
+* Source::                      Examining source files
+* Data::                        Examining data
+@ifclear CONLY
+* Languages::                   Using @value{GDBN} with different languages
+@end ifclear
+
+@ifset CONLY
+* C::                           C language support
+@end ifset
+
+* Symbols::                     Examining the symbol table
+* Altering::                    Altering execution
+* GDB Files::                   @value{GDBN} files
+* Targets::                     Specifying a debugging target
+* Controlling GDB::             Controlling @value{GDBN}
+* Sequences::                   Canned sequences of commands
+@ifclear DOSHOST
+* Emacs::                       Using @value{GDBN} under @sc{gnu} Emacs
+@end ifclear
+
+* GDB Bugs::                    Reporting bugs in @value{GDBN}
+
+@ifclear PRECONFIGURED
+@ifclear HPPA
+* Formatting Documentation::    How to format and print @value{GDBN} documentation
+@end ifclear
+
+@end ifclear
+
+* Command Line Editing::        Command Line Editing
+* Using History Interactively:: Using History Interactively
+* Installing GDB::              Installing GDB
+* Index::                       Index
+
+ --- The Detailed Node Listing ---
+
+Summary of @value{GDBN}
+
+* Free Software::               Freely redistributable software
+* Contributors::                Contributors to GDB
+
+Getting In and Out of @value{GDBN}
+
+* Invoking GDB::                How to start @value{GDBN}
+* Quitting GDB::                How to quit @value{GDBN}
+* Shell Commands::              How to use shell commands inside @value{GDBN}
+
+Invoking @value{GDBN}
+
+* File Options::                Choosing files
+* Mode Options::                Choosing modes
+
+@value{GDBN} Commands
+
+* Command Syntax::              How to give commands to @value{GDBN}
+* Completion::                  Command completion
+* Help::                        How to ask @value{GDBN} for help
+
+Running Programs Under @value{GDBN}
+
+* Compilation::                 Compiling for debugging
+* Starting::                    Starting your program
+@ifclear BARETARGET
+* Arguments::                   Your program's arguments
+* Environment::                 Your program's environment
+@end ifclear
+
+* Working Directory::           Your program's working directory
+* Input/Output::                Your program's input and output
+* Attach::                      Debugging an already-running process
+* Kill Process::                Killing the child process
+@ifclear HPPA
+* Process Information::         Additional process information
+@end ifclear
+
+* Threads::                     Debugging programs with multiple threads
+* Processes::                   Debugging programs with multiple processes
+
+Stopping and Continuing
+
+* Breakpoints::                 Breakpoints, watchpoints, and catchpoints
+* Continuing and Stepping::     Resuming execution
+@ifset POSIX
+* Signals::                     Signals
+@end ifset
+@ifclear BARETARGET
+* Thread Stops::                Stopping and starting multi-thread programs
+@end ifclear
+
+Breakpoints and watchpoints
+
+* Set Breaks::                  Setting breakpoints
+* Set Watchpoints::             Setting watchpoints
+* Set Catchpoints::             Setting catchpoints
+* Delete Breaks::               Deleting breakpoints
+* Disabling::                   Disabling breakpoints
+* Conditions::                  Break conditions
+* Break Commands::              Breakpoint command lists
+@ifclear CONLY
+* Breakpoint Menus::            Breakpoint menus
+@end ifclear
+
+Examining the Stack
+
+* Frames::                      Stack frames
+* Backtrace::                   Backtraces
+* Selection::                   Selecting a frame
+* Frame Info::                  Information on a frame
+* Alpha/MIPS Stack::            Alpha and MIPS machines and the function stack
+
+Examining Source Files
+
+* List::                        Printing source lines
+@ifclear DOSHOST
+* Search::                      Searching source files
+@end ifclear
+* Source Path::                 Specifying source directories
+* Machine Code::                Source and machine code
+
+Examining Data
+
+* Expressions::                 Expressions
+* Variables::                   Program variables
+* Arrays::                      Artificial arrays
+* Output Formats::              Output formats
+* Memory::                      Examining memory
+* Auto Display::                Automatic display
+* Print Settings::              Print settings
+* Value History::               Value history
+* Convenience Vars::            Convenience variables
+* Registers::                   Registers
+@ifclear HAVE-FLOAT
+* Floating Point Hardware::     Floating point hardware
+@end ifclear
+
+Using @value{GDBN} with Different Languages
+
+* Setting::                     Switching between source languages
+* Show::                        Displaying the language
+@ifset MOD2
+* Checks::                      Type and range checks
+@end ifset
+
+* Support::                     Supported languages
+
+Switching between source languages
+
+* Filenames::                   Filename extensions and languages.
+* Manually::                    Setting the working language manually
+* Automatically::               Having @value{GDBN} infer the source language
+
+@ifset MOD2
+Type and range checking
+
+* Type Checking::               An overview of type checking
+* Range Checking::              An overview of range checking
+@end ifset
+
+Supported languages
+
+@ifset MOD2
+* C::                           C and C++
+
+C Language Support
+
+* C Operators::                 C operators
+
+C Language Support
+@end ifset
+
+* C Operators::                 C and C++ operators
+* C Constants::                 C and C++ constants
+* Cplus expressions::           C++ expressions
+* C Defaults::                  Default settings for C and C++
+@ifset MOD2
+* C Checks::                    C and C++ type and range checks
+@end ifset
+* Debugging C::                 @value{GDBN} and C
+* Debugging C plus plus::       @value{GDBN} features for C++
+
+@ifset MOD2
+Modula-2
+
+* M2 Operators::                Built-in operators
+* Built-In Func/Proc::          Built-in functions and procedures
+* M2 Constants::                Modula-2 constants
+* M2 Defaults::                 Default settings for Modula-2
+* Deviations::                  Deviations from standard Modula-2
+* M2 Checks::                   Modula-2 type and range checks
+* M2 Scope::                    The scope operators @code{::} and @code{.}
+* GDB/M2::                      @value{GDBN} and Modula-2
+@end ifset
+
+Altering Execution
+
+* Assignment::                  Assignment to variables
+* Jumping::                     Continuing at a different address
+@ifclear BARETARGET
+* Signaling::                   Giving your program a signal
+@end ifclear
+* Returning::                   Returning from a function
+* Calling::                     Calling your program's functions
+* Patching::                    Patching your program
+
+@value{GDBN} Files
+
+* Files::                       Commands to specify files
+* Symbol Errors::               Errors reading symbol files
+
+Specifying a Debugging Target
+
+* Active Targets::              Active targets
+* Target Commands::             Commands for managing targets
+@ifclear HPPA
+* Byte Order::                  Choosing target byte order
+* Remote::                      Remote debugging
+
+Remote debugging
+@end ifclear
+
+@ifset REMOTESTUB
+* Remote Serial::               @value{GDBN} remote serial protocol
+@end ifset
+
+@ifset I960
+* i960-Nindy Remote::		@value{GDBN} with a remote i960 (Nindy)
+@end ifset
+
+@ifset AMD29K
+* UDI29K Remote::               The UDI protocol for AMD29K
+* EB29K Remote::		The EBMON protocol for AMD29K
+@end ifset
+
+@ifset VXWORKS
+* VxWorks Remote::		@value{GDBN} and VxWorks
+@end ifset
+
+@ifset ST2000
+* ST2000 Remote::               @value{GDBN} with a Tandem ST2000
+@end ifset
+
+@ifset H8
+* Hitachi Remote::              @value{GDBN} and Hitachi Microprocessors
+@end ifset
+
+@ifset MIPS
+* MIPS Remote::			@value{GDBN} and MIPS boards
+@end ifset
+
+@ifset SIMS
+* Simulator::                   Simulated CPU target
+@end ifset
+
+Controlling @value{GDBN}
+
+* Prompt::                      Prompt
+* Editing::                     Command editing
+* History::                     Command history
+* Screen Size::                 Screen size
+* Numbers::                     Numbers
+* Messages/Warnings::           Optional warnings and messages
+
+Canned Sequences of Commands
+
+* Define::                      User-defined commands
+* Hooks::                       User-defined command hooks
+* Command Files::               Command files
+* Output::                      Commands for controlled output
+
+Reporting Bugs in @value{GDBN}
+
+* Bug Criteria::                Have you found a bug?
+* Bug Reporting::               How to report bugs
+
+Installing @value{GDBN}
+
+* Separate Objdir::             Compiling @value{GDBN} in another directory
+* Config Names::                Specifying names for hosts and targets
+* Configure Options::           Summary of options for configure
+@end menu
+
+@end ifinfo
+
+@node Summary, Sample Session, Top, Top
+@unnumbered Summary of @value{GDBN}
+
+The purpose of a debugger such as @value{GDBN} is to allow you to see what is
+going on ``inside'' another program while it executes---or what another
+program was doing at the moment it crashed.
+
+@value{GDBN} can do four main kinds of things (plus other things in support of
+these) to help you catch bugs in the act:
+
+@itemize @bullet
+@item
+Start your program, specifying anything that might affect its behavior.
+
+@item
+Make your program stop on specified conditions.
+
+@item
+Examine what has happened, when your program has stopped.
+
+@item
+Change things in your program, so you can experiment with correcting the
+effects of one bug and go on to learn about another.
+@end itemize
+
+@ifclear CONLY
+You can use @value{GDBN} to debug programs written in C or C++.
+@c "MOD2" used as a "miscellaneous languages" flag here.
+@c This is acceptable while there is no real doc for Chill and Pascal.
+@ifclear MOD2
+For more information, see @ref{Support,,Supported languages}.
+@end ifclear
+@ifset MOD2
+For more information, see @ref{C,,C and C++}.
+
+Support for Modula-2 and Chill is partial.  For information on Modula-2,
+see @ref{Modula-2,,Modula-2}.  There is no further documentation on Chill yet.
+
+Debugging Pascal programs which use sets, subranges, file variables, or nested
+functions does not currently work.  @value{GDBN} does not support
+entering expressions, printing values, or similar features using Pascal syntax.
+@end ifset
+
+@ifset FORTRAN
+@cindex Fortran
+@value{GDBN} can be used to debug programs written in Fortran, although
+it does not yet support entering expressions, printing values, or
+similar features using Fortran syntax.  It may be necessary to refer to
+some variables with a trailing underscore.
+@end ifset
+@end ifclear
+
+@ifset HPPA
+This version of the manual documents HP Wildebeest (WDB) Version 0.75,
+implemented on HP 9000 systems running Release 10.20, 10.30, or 11.0 of
+the HP-UX operating system.  HP WDB 0.75 can be used to debug code
+generated by the HP ANSI C and HP ANSI C++ compilers as well as the
+@sc{gnu} C and C++ compilers.  It does not support the debugging of
+Fortran, Modula-2, or Chill programs.
+@end ifset
+
+@menu
+* Free Software::               Freely redistributable software
+* Contributors::                Contributors to GDB
+@end menu
+
+@node Free Software, Contributors, Summary, Summary
+@unnumberedsec Free software
+
+@value{GDBN} is @dfn{free software}, protected by the @sc{gnu} 
+General Public License
+(GPL).  The GPL gives you the freedom to copy or adapt a licensed
+program---but every person getting a copy also gets with it the
+freedom to modify that copy (which means that they must get access to
+the source code), and the freedom to distribute further copies.
+Typical software companies use copyrights to limit your freedoms; the
+Free Software Foundation uses the GPL to preserve these freedoms.
+
+Fundamentally, the General Public License is a license which says that
+you have these freedoms and that you cannot take these freedoms away
+from anyone else.
+
+@node Contributors,  , Free Software, Summary
+@unnumberedsec Contributors to GDB
+
+Richard Stallman was the original author of GDB, and of many other
+@sc{gnu} programs.  Many others have contributed to its development.
+This section attempts to credit major contributors.  One of the virtues
+of free software is that everyone is free to contribute to it; with
+regret, we cannot actually acknowledge everyone here.  The file
+@file{ChangeLog} in the @value{GDBN} distribution approximates a
+blow-by-blow account.
+
+Changes much prior to version 2.0 are lost in the mists of time.
+
+@quotation
+@emph{Plea:} Additions to this section are particularly welcome.  If you
+or your friends (or enemies, to be evenhanded) have been unfairly
+omitted from this list, we would like to add your names!
+@end quotation
+
+So that they may not regard their many labors as thankless, we
+particularly thank those who shepherded @value{GDBN} through major
+releases:
+Jim Blandy (release 4.18);
+Jason Molenda (release 4.17);
+Stan Shebs (release 4.14);
+Fred Fish (releases 4.16, 4.15, 4.13, 4.12, 4.11, 4.10, and 4.9);
+Stu Grossman and John Gilmore (releases 4.8, 4.7, 4.6, 4.5, and 4.4);
+John Gilmore (releases 4.3, 4.2, 4.1, 4.0, and 3.9);
+Jim Kingdon (releases 3.5, 3.4, and 3.3);
+and Randy Smith (releases 3.2, 3.1, and 3.0).
+
+Richard Stallman, assisted at various times by Peter TerMaat, Chris
+Hanson, and Richard Mlynarik, handled releases through 2.8.
+
+@ifclear CONLY
+Michael Tiemann is the author of most of the @sc{gnu} C++ support in GDB,
+with significant additional contributions from Per Bothner.  James
+Clark wrote the @sc{gnu} C++ demangler.  Early work on C++ was by Peter
+TerMaat (who also did much general update work leading to release 3.0).
+@end ifclear
+
+@value{GDBN} 4 uses the BFD subroutine library to examine multiple
+object-file formats; BFD was a joint project of David V.
+Henkel-Wallace, Rich Pixley, Steve Chamberlain, and John Gilmore.
+
+David Johnson wrote the original COFF support; Pace Willison did
+the original support for encapsulated COFF.
+
+Brent Benson of Harris Computer Systems contributed DWARF 2 support.
+
+Adam de Boor and Bradley Davis contributed the ISI Optimum V support.
+Per Bothner, Noboyuki Hikichi, and Alessandro Forin contributed MIPS
+support.
+Jean-Daniel Fekete contributed Sun 386i support.
+Chris Hanson improved the HP9000 support.
+Noboyuki Hikichi and Tomoyuki Hasei contributed Sony/News OS 3 support.
+David Johnson contributed Encore Umax support.
+Jyrki Kuoppala contributed Altos 3068 support.
+Jeff Law contributed HP PA and SOM support.
+Keith Packard contributed NS32K support.
+Doug Rabson contributed Acorn Risc Machine support.
+Bob Rusk contributed Harris Nighthawk CX-UX support.
+Chris Smith contributed Convex support (and Fortran debugging).
+Jonathan Stone contributed Pyramid support.
+Michael Tiemann contributed SPARC support.
+Tim Tucker contributed support for the Gould NP1 and Gould Powernode.
+Pace Willison contributed Intel 386 support.
+Jay Vosburgh contributed Symmetry support.
+
+Andreas Schwab contributed M68K Linux support.
+
+Rich Schaefer and Peter Schauer helped with support of SunOS shared
+libraries.
+
+Jay Fenlason and Roland McGrath ensured that @value{GDBN} and GAS agree
+about several machine instruction sets.
+
+Patrick Duval, Ted Goldstein, Vikram Koka and Glenn Engel helped develop
+remote debugging.  Intel Corporation, Wind River Systems, AMD, and ARM
+contributed remote debugging modules for the i960, VxWorks, A29K UDI,
+and RDI targets, respectively.
+
+Brian Fox is the author of the readline libraries providing
+command-line editing and command history.
+
+Andrew Beers of SUNY Buffalo wrote the language-switching code,
+@ifset MOD2
+the Modula-2 support,
+@end ifset
+and contributed the Languages chapter of this manual.
+
+Fred Fish wrote most of the support for Unix System Vr4.  
+@ifclear CONLY
+He also enhanced the command-completion support to cover C++ overloaded
+symbols.
+@end ifclear
+
+Hitachi America, Ltd. sponsored the support for H8/300, H8/500, and
+Super-H processors.
+
+NEC sponsored the support for the v850, Vr4xxx, and Vr5xxx processors.
+
+Mitsubishi sponsored the support for D10V, D30V, and M32R/D processors.
+
+Toshiba sponsored the support for the TX39 Mips processor.
+
+Matsushita sponsored the support for the MN10200 and MN10300 processors.
+
+Fujitsu sponsored the support for SPARClite and FR30 processors
+
+Kung Hsu, Jeff Law, and Rick Sladkey added support for hardware
+watchpoints.
+
+Michael Snyder added support for tracepoints.
+
+Stu Grossman wrote gdbserver.
+
+Jim Kingdon, Peter Schauer, Ian Taylor, and Stu Grossman made
+nearly innumerable bug fixes and cleanups throughout GDB.
+
+The following people at the Hewlett-Packard Company contributed
+support for the PA-RISC 2.0 architecture, HP-UX 10.20, 10.30, and 11.0
+(narrow mode), HP's implementation of kernel threads, HP's aC++
+compiler, and the terminal user interface: Ben Krepp, Richard Title,
+John Bishop, Susan Macchia, Kathy Mann, Satish Pai, India Paul, Steve
+Rehrauer, and Elena Zannoni.  Kim Haase provided HP-specific
+information in this manual.
+
+Cygnus Solutions has sponsored GDB maintenance and much of its
+development since 1991.  Cygnus engineers who have worked on GDB
+fulltime include Mark Alexander, Jim Blandy, Per Bothner, Edith Epstein,
+Chris Faylor, Fred Fish, Martin Hunt, Jim Ingham, John Gilmore, Stu
+Grossman, Kung Hsu, Jim Kingdon, John Metzler, Fernando Nasser, Geoffrey
+Noer, Dawn Perchik, Rich Pixley, Zdenek Radouch, Keith Seitz, Stan
+Shebs, David Taylor, and Elena Zannoni.  In addition, Dave Brolley, Ian
+Carmichael, Steve Chamberlain, Nick Clifton, JT Conklin, Stan Cox, DJ
+Delorie, Ulrich Drepper, Frank Eigler, Doug Evans, Sean Fagan, David
+Henkel-Wallace, Richard Henderson, Jeff Holcomb, Jeff Law, Jim Lemke,
+Tom Lord, Bob Manson, Michael Meissner, Jason Merrill, Catherine Moore,
+Drew Moseley, Ken Raeburn, Gavin Romig-Koch, Rob Savoye, Jamie Smith,
+Mike Stump, Ian Taylor, Angela Thomas, Michael Tiemann, Tom Tromey, Ron
+Unrau, Jim Wilson, and David Zuhn have made contributions both large
+and small.
+
+
+@ifclear BARETARGET
+@node Sample Session, Invocation, Summary, Top
+@chapter A Sample @value{GDBN} Session
+
+You can use this manual at your leisure to read all about @value{GDBN}.
+However, a handful of commands are enough to get started using the
+debugger.  This chapter illustrates those commands.
+
+@iftex
+In this sample session, we emphasize user input like this: @b{input},
+to make it easier to pick out from the surrounding output.
+@end iftex
+
+@c FIXME: this example may not be appropriate for some configs, where
+@c FIXME...primary interest is in remote use.
+
+One of the preliminary versions of @sc{gnu} @code{m4} (a generic macro
+processor) exhibits the following bug: sometimes, when we change its
+quote strings from the default, the commands used to capture one macro
+definition within another stop working.  In the following short @code{m4}
+session, we define a macro @code{foo} which expands to @code{0000}; we
+then use the @code{m4} built-in @code{defn} to define @code{bar} as the
+same thing.  However, when we change the open quote string to
+@code{<QUOTE>} and the close quote string to @code{<UNQUOTE>}, the same
+procedure fails to define a new synonym @code{baz}:
+
+@smallexample
+$ @b{cd gnu/m4}
+$ @b{./m4}
+@b{define(foo,0000)}
+
+@b{foo}
+0000
+@b{define(bar,defn(`foo'))}
+
+@b{bar}
+0000
+@b{changequote(<QUOTE>,<UNQUOTE>)}
+
+@b{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
+@b{baz}
+@b{C-d}
+m4: End of input: 0: fatal error: EOF in string
+@end smallexample
+
+@noindent
+Let us use @value{GDBN} to try to see what is going on.
+
+@ifclear HPPA
+@smallexample
+$ @b{@value{GDBP} m4}
+@c FIXME: this falsifies the exact text played out, to permit smallbook
+@c FIXME... format to come out better.
+@value{GDBN} is free software and you are welcome to distribute copies
+ of it under certain conditions; type "show copying" to see 
+ the conditions.
+There is absolutely no warranty for @value{GDBN}; type "show warranty" 
+ for details.
+
+@value{GDBN} @value{GDBVN}, Copyright 1999 Free Software Foundation, Inc...
+(@value{GDBP})
+@end smallexample
+@end ifclear
+@ifset HPPA
+@smallexample
+$ @b{@value{GDBP} m4}
+Wildebeest is free software and you are welcome to distribute copies of
+it under certain conditions; type "show copying" to see the conditions.
+There is absolutely no warranty for Wildebeest; type "show warranty"
+for details.
+
+Hewlett-Packard Wildebeest 0.75 (based on GDB 4.16)
+(built for PA-RISC 1.1 or 2.0, HP-UX 10.20)
+Copyright 1996, 1997 Free Software Foundation, Inc.
+(@value{GDBP})
+@end smallexample
+@end ifset
+
+@noindent
+@value{GDBN} reads only enough symbol data to know where to find the
+rest when needed; as a result, the first prompt comes up very quickly.
+We now tell @value{GDBN} to use a narrower display width than usual, so
+that examples fit in this manual.
+
+@smallexample
+(@value{GDBP}) @b{set width 70}
+@end smallexample
+
+@noindent
+We need to see how the @code{m4} built-in @code{changequote} works.
+Having looked at the source, we know the relevant subroutine is
+@code{m4_changequote}, so we set a breakpoint there with the @value{GDBN}
+@code{break} command.
+
+@smallexample
+(@value{GDBP}) @b{break m4_changequote}
+Breakpoint 1 at 0x62f4: file builtin.c, line 879.
+@end smallexample
+
+@noindent
+Using the @code{run} command, we start @code{m4} running under @value{GDBN}
+control; as long as control does not reach the @code{m4_changequote}
+subroutine, the program runs as usual:
+
+@smallexample
+(@value{GDBP}) @b{run}
+Starting program: /work/Editorial/gdb/gnu/m4/m4
+@b{define(foo,0000)}
+
+@b{foo}
+0000
+@end smallexample
+
+@noindent
+To trigger the breakpoint, we call @code{changequote}.  @value{GDBN}
+suspends execution of @code{m4}, displaying information about the
+context where it stops.
+
+@smallexample
+@b{changequote(<QUOTE>,<UNQUOTE>)}
+
+Breakpoint 1, m4_changequote (argc=3, argv=0x33c70) 
+    at builtin.c:879
+879         if (bad_argc(TOKEN_DATA_TEXT(argv[0]),argc,1,3))
+@end smallexample
+
+@noindent
+Now we use the command @code{n} (@code{next}) to advance execution to
+the next line of the current function.
+
+@smallexample
+(@value{GDBP}) @b{n}
+882         set_quotes((argc >= 2) ? TOKEN_DATA_TEXT(argv[1])\
+ : nil,
+@end smallexample
+
+@noindent
+@code{set_quotes} looks like a promising subroutine.  We can go into it
+by using the command @code{s} (@code{step}) instead of @code{next}.
+@code{step} goes to the next line to be executed in @emph{any}
+subroutine, so it steps into @code{set_quotes}.
+
+@smallexample
+(@value{GDBP}) @b{s}
+set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
+    at input.c:530
+530         if (lquote != def_lquote)
+@end smallexample
+
+@noindent
+The display that shows the subroutine where @code{m4} is now
+suspended (and its arguments) is called a stack frame display.  It
+shows a summary of the stack.  We can use the @code{backtrace}
+command (which can also be spelled @code{bt}), to see where we are
+in the stack as a whole: the @code{backtrace} command displays a
+stack frame for each active subroutine.
+
+@smallexample
+(@value{GDBP}) @b{bt}
+#0  set_quotes (lq=0x34c78 "<QUOTE>", rq=0x34c88 "<UNQUOTE>")
+    at input.c:530
+#1  0x6344 in m4_changequote (argc=3, argv=0x33c70) 
+    at builtin.c:882
+#2  0x8174 in expand_macro (sym=0x33320) at macro.c:242
+#3  0x7a88 in expand_token (obs=0x0, t=209696, td=0xf7fffa30)
+    at macro.c:71
+#4  0x79dc in expand_input () at macro.c:40
+#5  0x2930 in main (argc=0, argv=0xf7fffb20) at m4.c:195
+@end smallexample
+
+@noindent
+We step through a few more lines to see what happens.  The first two
+times, we can use @samp{s}; the next two times we use @code{n} to avoid
+falling into the @code{xstrdup} subroutine.
+
+@smallexample
+(@value{GDBP}) @b{s}
+0x3b5c  532         if (rquote != def_rquote)
+(@value{GDBP}) @b{s}
+0x3b80  535         lquote = (lq == nil || *lq == '\0') ?  \
+def_lquote : xstrdup(lq);
+(@value{GDBP}) @b{n}
+536         rquote = (rq == nil || *rq == '\0') ? def_rquote\
+ : xstrdup(rq);
+(@value{GDBP}) @b{n}
+538         len_lquote = strlen(rquote);
+@end smallexample
+
+@noindent
+The last line displayed looks a little odd; we can examine the variables
+@code{lquote} and @code{rquote} to see if they are in fact the new left
+and right quotes we specified.  We use the command @code{p}
+(@code{print}) to see their values.
+
+@smallexample
+(@value{GDBP}) @b{p lquote}
+$1 = 0x35d40 "<QUOTE>"
+(@value{GDBP}) @b{p rquote}
+$2 = 0x35d50 "<UNQUOTE>"
+@end smallexample
+
+@noindent
+@code{lquote} and @code{rquote} are indeed the new left and right quotes.
+To look at some context, we can display ten lines of source
+surrounding the current line with the @code{l} (@code{list}) command.
+
+@smallexample
+(@value{GDBP}) @b{l}
+533             xfree(rquote);
+534
+535         lquote = (lq == nil || *lq == '\0') ? def_lquote\
+ : xstrdup (lq);
+536         rquote = (rq == nil || *rq == '\0') ? def_rquote\
+ : xstrdup (rq);
+537
+538         len_lquote = strlen(rquote);
+539         len_rquote = strlen(lquote);
+540     @}
+541
+542     void
+@end smallexample
+
+@noindent
+Let us step past the two lines that set @code{len_lquote} and
+@code{len_rquote}, and then examine the values of those variables.
+
+@smallexample
+(@value{GDBP}) @b{n}
+539         len_rquote = strlen(lquote);
+(@value{GDBP}) @b{n}
+540     @}
+(@value{GDBP}) @b{p len_lquote}
+$3 = 9
+(@value{GDBP}) @b{p len_rquote}
+$4 = 7
+@end smallexample
+
+@noindent
+That certainly looks wrong, assuming @code{len_lquote} and
+@code{len_rquote} are meant to be the lengths of @code{lquote} and
+@code{rquote} respectively.  We can set them to better values using
+the @code{p} command, since it can print the value of
+any expression---and that expression can include subroutine calls and
+assignments.
+
+@smallexample
+(@value{GDBP}) @b{p len_lquote=strlen(lquote)}
+$5 = 7
+(@value{GDBP}) @b{p len_rquote=strlen(rquote)}
+$6 = 9
+@end smallexample
+
+@noindent
+Is that enough to fix the problem of using the new quotes with the
+@code{m4} built-in @code{defn}?  We can allow @code{m4} to continue
+executing with the @code{c} (@code{continue}) command, and then try the
+example that caused trouble initially:
+
+@smallexample
+(@value{GDBP}) @b{c}
+Continuing.
+
+@b{define(baz,defn(<QUOTE>foo<UNQUOTE>))}
+
+baz
+0000
+@end smallexample
+
+@noindent
+Success!  The new quotes now work just as well as the default ones.  The
+problem seems to have been just the two typos defining the wrong
+lengths.  We allow @code{m4} exit by giving it an EOF as input:
+
+@smallexample
+@b{C-d}
+Program exited normally.
+@end smallexample
+
+@noindent
+The message @samp{Program exited normally.} is from @value{GDBN}; it
+indicates @code{m4} has finished executing.  We can end our @value{GDBN}
+session with the @value{GDBN} @code{quit} command.
+
+@smallexample
+(@value{GDBP}) @b{quit}
+@end smallexample
+@end ifclear
+
+@node Invocation, Commands, Sample Session, Top
+@chapter Getting In and Out of @value{GDBN}
+
+This chapter discusses how to start @value{GDBN}, and how to get out of it.
+The essentials are: 
+@itemize @bullet
+@item 
+type @samp{@value{GDBP}} to start GDB.
+@item 
+type @kbd{quit} or @kbd{C-d} to exit.
+@end itemize
+
+@menu
+* Invoking GDB::                How to start @value{GDBN}
+* Quitting GDB::                How to quit @value{GDBN}
+* Shell Commands::              How to use shell commands inside @value{GDBN}
+@end menu
+
+@node Invoking GDB, Quitting GDB, Invocation, Invocation
+@section Invoking @value{GDBN}
+
+@ifset H8EXCLUSIVE
+For details on starting up @value{GDBP} as a
+remote debugger attached to a Hitachi microprocessor, see @ref{Hitachi
+Remote,,@value{GDBN} and Hitachi Microprocessors}.
+@end ifset
+
+Invoke @value{GDBN} by running the program @code{@value{GDBP}}.  Once started,
+@value{GDBN} reads commands from the terminal until you tell it to exit.
+
+You can also run @code{@value{GDBP}} with a variety of arguments and options,
+to specify more of your debugging environment at the outset.
+
+@ifset GENERIC
+The command-line options described here are designed
+to cover a variety of situations; in some environments, some of these
+options may effectively be unavailable.  
+@end ifset
+
+The most usual way to start @value{GDBN} is with one argument,
+specifying an executable program:
+
+@example
+@value{GDBP} @var{program}
+@end example
+
+@ifclear BARETARGET
+@noindent
+You can also start with both an executable program and a core file
+specified:
+
+@example
+@value{GDBP} @var{program} @var{core}
+@end example
+
+You can, instead, specify a process ID as a second argument, if you want
+to debug a running process:
+
+@example
+@value{GDBP} @var{program} 1234
+@end example
+
+@noindent
+would attach @value{GDBN} to process @code{1234} (unless you also have a file
+named @file{1234}; @value{GDBN} does check for a core file first).
+
+@ifclear HPPA
+Taking advantage of the second command-line argument requires a fairly
+complete operating system; when you use @value{GDBN} as a remote debugger
+attached to a bare board, there may not be any notion of ``process'',
+and there is often no way to get a core dump.
+@end ifclear
+@end ifclear
+
+You can run @code{gdb} without printing the front material, which describes
+@value{GDBN}'s non-warranty, by specifying @code{-silent}:
+
+@smallexample
+@value{GDBP} -silent
+@end smallexample
+
+@noindent
+You can further control how @value{GDBN} starts up by using command-line
+options.  @value{GDBN} itself can remind you of the options available.
+
+@noindent
+Type
+
+@example
+@value{GDBP} -help
+@end example
+
+@noindent
+to display all available options and briefly describe their use
+(@samp{@value{GDBP} -h} is a shorter equivalent).
+
+All options and command line arguments you give are processed
+in sequential order.  The order makes a difference when the
+@samp{-x} option is used.
+
+
+@menu
+@ifclear GENERIC
+@ifset REMOTESTUB
+* Remote Serial::               @value{GDBN} remote serial protocol
+@end ifset
+@ifset I960
+* i960-Nindy Remote::		@value{GDBN} with a remote i960 (Nindy)
+@end ifset
+@ifset AMD29K
+* UDI29K Remote::               The UDI protocol for AMD29K
+* EB29K Remote::		The EBMON protocol for AMD29K
+@end ifset
+@ifset VXWORKS
+* VxWorks Remote::		@value{GDBN} and VxWorks
+@end ifset
+@ifset ST2000
+* ST2000 Remote::               @value{GDBN} with a Tandem ST2000
+@end ifset
+@ifset H8
+* Hitachi Remote::              @value{GDBN} and Hitachi Microprocessors
+@end ifset
+@ifset MIPS
+* MIPS Remote::			@value{GDBN} and MIPS boards
+@end ifset
+@ifset SPARCLET
+* Sparclet Remote::             @value{GDBN} and Sparclet boards
+@end ifset
+@ifset SIMS
+* Simulator::                   Simulated CPU target
+@end ifset
+@end ifclear
+@c remnant makeinfo bug requires this blank line after *two* end-ifblahs:
+
+* File Options::                Choosing files
+* Mode Options::                Choosing modes
+@end menu
+
+@ifclear GENERIC
+@ifclear HPPA
+@include remote.texi
+@end ifclear
+@end ifclear
+
+@node File Options
+@subsection Choosing files
+
+@ifclear BARETARGET
+When @value{GDBN} starts, it reads any arguments other than options as
+specifying an executable file and core file (or process ID).  This is
+the same as if the arguments were specified by the @samp{-se} and
+@samp{-c} options respectively.  (@value{GDBN} reads the first argument
+that does not have an associated option flag as equivalent to the
+@samp{-se} option followed by that argument; and the second argument
+that does not have an associated option flag, if any, as equivalent to
+the @samp{-c} option followed by that argument.)
+@end ifclear
+@ifset BARETARGET
+When @value{GDBN} starts, it reads any argument other than options as
+specifying an executable file.  This is the same as if the argument was
+specified by the @samp{-se} option.
+@end ifset
+
+Many options have both long and short forms; both are shown in the
+following list.  @value{GDBN} also recognizes the long forms if you truncate
+them, so long as enough of the option is present to be unambiguous.
+(If you prefer, you can flag option arguments with @samp{--} rather
+than @samp{-}, though we illustrate the more usual convention.)
+
+@table @code
+@item -symbols @var{file}
+@itemx -s @var{file}
+Read symbol table from file @var{file}.
+
+@item -exec @var{file}
+@itemx -e @var{file}
+Use file @var{file} as the executable file to execute when
+@ifset BARETARGET
+appropriate.
+@end ifset
+@ifclear BARETARGET
+appropriate, and for examining pure data in conjunction with a core
+dump.
+@end ifclear
+
+@item -se @var{file}
+Read symbol table from file @var{file} and use it as the executable
+file.
+
+@ifclear BARETARGET
+@item -core @var{file}
+@itemx -c @var{file}
+Use file @var{file} as a core dump to examine.
+
+@item -c @var{number}
+Connect to process ID @var{number}, as with the @code{attach} command
+(unless there is a file in core-dump format named @var{number}, in which
+case @samp{-c} specifies that file as a core dump to read).
+@end ifclear
+
+@item -command @var{file}
+@itemx -x @var{file}
+Execute @value{GDBN} commands from file @var{file}.  @xref{Command
+Files,, Command files}.
+
+@item -directory @var{directory}
+@itemx -d @var{directory}
+Add @var{directory} to the path to search for source files.
+
+@ifclear BARETARGET
+@ifclear HPPA
+@item -m
+@itemx -mapped
+@emph{Warning: this option depends on operating system facilities that are not
+supported on all systems.}@*
+If memory-mapped files are available on your system through the @code{mmap}
+system call, you can use this option 
+to have @value{GDBN} write the symbols from your
+program into a reusable file in the current directory.  If the program you are debugging is
+called @file{/tmp/fred}, the mapped symbol file is @file{./fred.syms}.
+Future @value{GDBN} debugging sessions notice the presence of this file,
+and can quickly map in symbol information from it, rather than reading
+the symbol table from the executable program.
+
+The @file{.syms} file is specific to the host machine where @value{GDBN}
+is run.  It holds an exact image of the internal @value{GDBN} symbol
+table.  It cannot be shared across multiple host platforms.
+@end ifclear
+@end ifclear
+
+@ifclear HPPA
+@item -r
+@itemx -readnow
+Read each symbol file's entire symbol table immediately, rather than
+the default, which is to read it incrementally as it is needed.
+This makes startup slower, but makes future operations faster.
+@end ifclear
+@end table
+
+@ifclear BARETARGET
+@ifclear HPPA
+The @code{-mapped} and @code{-readnow} options are typically combined in
+order to build a @file{.syms} file that contains complete symbol
+information.  (@xref{Files,,Commands to specify files}, for
+information on @file{.syms} files.) A simple GDB invocation to do
+nothing but build a @file{.syms} file for future use is:
+
+@example
+	gdb -batch -nx -mapped -readnow programname
+@end example
+@end ifclear
+@end ifclear
+
+@node Mode Options,  , File Options, Invoking GDB
+@subsection Choosing modes
+
+You can run @value{GDBN} in various alternative modes---for example, in
+batch mode or quiet mode.
+
+@table @code
+@item -nx
+@itemx -n
+Do not execute commands from any initialization files (normally called
+@file{.gdbinit}, or @file{gdb.ini} on PCs).  Normally, the commands in
+these files are executed after all the command options and arguments
+have been processed.  @xref{Command Files,,Command files}.
+
+@item -quiet
+@itemx -q
+``Quiet''.  Do not print the introductory and copyright messages.  These
+messages are also suppressed in batch mode.
+
+@item -batch
+Run in batch mode.  Exit with status @code{0} after processing all the
+command files specified with @samp{-x} (and all commands from
+initialization files, if not inhibited with @samp{-n}).  Exit with
+nonzero status if an error occurs in executing the @value{GDBN} commands
+in the command files.
+
+Batch mode may be useful for running @value{GDBN} as a filter, for example to
+download and run a program on another computer; in order to make this
+more useful, the message
+
+@example
+Program exited normally.
+@end example
+
+@noindent
+(which is ordinarily issued whenever a program running under @value{GDBN} control
+terminates) is not issued when running in batch mode.
+
+@item -cd @var{directory}
+Run @value{GDBN} using @var{directory} as its working directory,
+instead of the current directory.
+
+@ifclear DOSHOST
+@item -fullname
+@itemx -f
+@sc{gnu} Emacs sets this option when it runs @value{GDBN} as a subprocess.  It tells @value{GDBN}
+to output the full file name and line number in a standard,
+recognizable fashion each time a stack frame is displayed (which
+includes each time your program stops).  This recognizable format looks
+like two @samp{\032} characters, followed by the file name, line number
+and character position separated by colons, and a newline.  The
+Emacs-to-@value{GDBN} interface program uses the two @samp{\032} characters as
+a signal to display the source code for the frame.
+@end ifclear
+
+@ifset SERIAL
+@ifclear HPPA
+@item -b @var{bps}
+Set the line speed (baud rate or bits per second) of any serial
+interface used by @value{GDBN} for remote debugging.
+@end ifclear
+
+@item -tty @var{device}
+Run using @var{device} for your program's standard input and output.
+@c FIXME: kingdon thinks there is more to -tty.  Investigate.
+@end ifset
+
+@ifset HPPA
+@item -tui
+Use a Terminal User Interface.  For information, use your Web browser to
+read the file @file{TUI.html}, which is usually installed in the
+directory @code{/opt/langtools/wdb/doc} on HP-UX systems.  Do not use
+this option if you run @value{GDBN} from Emacs (see @pxref{Emacs, ,Using
+@value{GDBN} under @sc{gnu} Emacs}).
+
+@item -xdb
+Run in XDB compatibility mode, allowing the use of certain XDB commands.
+For information, see the file @file{xdb_trans.html}, which is usually
+installed in the directory @code{/opt/langtools/wdb/doc} on HP-UX
+systems.
+@end ifset
+@end table
+
+@node Quitting GDB, Shell Commands, Invoking GDB, Invocation
+@section Quitting @value{GDBN}
+@cindex exiting @value{GDBN}
+@cindex leaving @value{GDBN}
+
+@table @code
+@kindex quit @r{[}@var{expression}@r{]}
+@kindex q
+@item quit
+To exit @value{GDBN}, use the @code{quit} command (abbreviated @code{q}), or 
+type an end-of-file character (usually @kbd{C-d}).  If you do not supply 
+@var{expression}, @value{GDBN} will terminate normally; otherwise it will 
+terminate using the result of @var{expression} as the error code.
+@end table
+
+@cindex interrupt
+An interrupt (often @kbd{C-c}) does not exit from @value{GDBN}, but rather
+terminates the action of any @value{GDBN} command that is in progress and
+returns to @value{GDBN} command level.  It is safe to type the interrupt
+character at any time because @value{GDBN} does not allow it to take effect
+until a time when it is safe.
+
+@ifclear BARETARGET
+If you have been using @value{GDBN} to control an attached process or
+device, you can release it with the @code{detach} command
+(@pxref{Attach, ,Debugging an already-running process}).
+@end ifclear
+
+@node Shell Commands,  , Quitting GDB, Invocation
+@section Shell commands
+
+If you need to execute occasional shell commands during your
+debugging session, there is no need to leave or suspend @value{GDBN}; you can
+just use the @code{shell} command.
+
+@table @code
+@kindex shell
+@cindex shell escape
+@item shell @var{command string}
+Invoke a standard shell to execute @var{command string}.
+@ifclear DOSHOST
+If it exists, the environment variable @code{SHELL} determines which
+shell to run.  Otherwise @value{GDBN} uses @code{/bin/sh}.
+@end ifclear
+@end table
+
+The utility @code{make} is often needed in development environments.
+You do not have to use the @code{shell} command for this purpose in
+@value{GDBN}:
+
+@table @code
+@kindex make
+@cindex calling make
+@item make @var{make-args}
+Execute the @code{make} program with the specified
+arguments.  This is equivalent to @samp{shell make @var{make-args}}.
+@end table
+
+@node Commands, Running, Invocation, Top
+@chapter @value{GDBN} Commands
+
+You can abbreviate a @value{GDBN} command to the first few letters of the command
+name, if that abbreviation is unambiguous; and you can repeat certain
+@value{GDBN} commands by typing just @key{RET}.  You can also use the @key{TAB}
+key to get @value{GDBN} to fill out the rest of a word in a command (or to
+show you the alternatives available, if there is more than one possibility).
+
+@menu
+* Command Syntax::              How to give commands to @value{GDBN}
+* Completion::                  Command completion
+* Help::                        How to ask @value{GDBN} for help
+@end menu
+
+@node Command Syntax, Completion, Commands, Commands
+@section Command syntax
+
+A @value{GDBN} command is a single line of input.  There is no limit on
+how long it can be.  It starts with a command name, which is followed by
+arguments whose meaning depends on the command name.  For example, the
+command @code{step} accepts an argument which is the number of times to
+step, as in @samp{step 5}.  You can also use the @code{step} command
+with no arguments.  Some command names do not allow any arguments.
+
+@cindex abbreviation
+@value{GDBN} command names may always be truncated if that abbreviation is
+unambiguous.  Other possible command abbreviations are listed in the
+documentation for individual commands.  In some cases, even ambiguous
+abbreviations are allowed; for example, @code{s} is specially defined as
+equivalent to @code{step} even though there are other commands whose
+names start with @code{s}.  You can test abbreviations by using them as
+arguments to the @code{help} command.
+
+@cindex repeating commands
+@kindex RET
+A blank line as input to @value{GDBN} (typing just @key{RET}) means to
+repeat the previous command. Certain commands (for example, @code{run})
+will not repeat this way; these are commands whose unintentional
+repetition might cause trouble and which you are unlikely to want to
+repeat.
+
+The @code{list} and @code{x} commands, when you repeat them with
+@key{RET}, construct new arguments rather than repeating
+exactly as typed.  This permits easy scanning of source or memory.
+
+@value{GDBN} can also use @key{RET} in another way: to partition lengthy
+output, in a way similar to the common utility @code{more}
+(@pxref{Screen Size,,Screen size}).  Since it is easy to press one
+@key{RET} too many in this situation, @value{GDBN} disables command
+repetition after any command that generates this sort of display.
+
+@kindex #
+@cindex comment
+Any text from a @kbd{#} to the end of the line is a comment; it does
+nothing.  This is useful mainly in command files (@pxref{Command
+Files,,Command files}).
+
+@node Completion, Help, Command Syntax, Commands
+@section Command completion
+
+@cindex completion
+@cindex word completion
+@value{GDBN} can fill in the rest of a word in a command for you, if there is
+only one possibility; it can also show you what the valid possibilities
+are for the next word in a command, at any time.  This works for @value{GDBN}
+commands, @value{GDBN} subcommands, and the names of symbols in your program.
+
+Press the @key{TAB} key whenever you want @value{GDBN} to fill out the rest
+of a word.  If there is only one possibility, @value{GDBN} fills in the
+word, and waits for you to finish the command (or press @key{RET} to
+enter it).  For example, if you type
+
+@c FIXME "@key" does not distinguish its argument sufficiently to permit
+@c complete accuracy in these examples; space introduced for clarity.
+@c If texinfo enhancements make it unnecessary, it would be nice to
+@c replace " @key" by "@key" in the following...
+@example
+(@value{GDBP}) info bre @key{TAB}
+@end example
+
+@noindent
+@value{GDBN} fills in the rest of the word @samp{breakpoints}, since that is
+the only @code{info} subcommand beginning with @samp{bre}:
+
+@example
+(@value{GDBP}) info breakpoints
+@end example
+
+@noindent
+You can either press @key{RET} at this point, to run the @code{info
+breakpoints} command, or backspace and enter something else, if
+@samp{breakpoints} does not look like the command you expected.  (If you
+were sure you wanted @code{info breakpoints} in the first place, you
+might as well just type @key{RET} immediately after @samp{info bre},
+to exploit command abbreviations rather than command completion).
+
+If there is more than one possibility for the next word when you press
+@key{TAB}, @value{GDBN} sounds a bell.  You can either supply more
+characters and try again, or just press @key{TAB} a second time;
+@value{GDBN} displays all the possible completions for that word.  For
+example, you might want to set a breakpoint on a subroutine whose name
+begins with @samp{make_}, but when you type @kbd{b make_@key{TAB}} @value{GDBN}
+just sounds the bell.  Typing @key{TAB} again displays all the
+function names in your program that begin with those characters, for
+example:
+
+@example
+(@value{GDBP}) b make_ @key{TAB}
+@exdent @value{GDBN} sounds bell; press @key{TAB} again, to see:
+make_a_section_from_file     make_environ               
+make_abs_section             make_function_type         
+make_blockvector             make_pointer_type          
+make_cleanup                 make_reference_type        
+make_command                 make_symbol_completion_list
+(@value{GDBP}) b make_
+@end example
+
+@noindent
+After displaying the available possibilities, @value{GDBN} copies your
+partial input (@samp{b make_} in the example) so you can finish the
+command.
+
+If you just want to see the list of alternatives in the first place, you
+can press @kbd{M-?} rather than pressing @key{TAB} twice. @kbd{M-?}
+means @kbd{@key{META} ?}.  You can type this
+@ifclear DOSHOST
+either by holding down a
+key designated as the @key{META} shift on your keyboard (if there is
+one) while typing @kbd{?}, or
+@end ifclear
+as @key{ESC} followed by @kbd{?}.
+
+@cindex quotes in commands
+@cindex completion of quoted strings
+Sometimes the string you need, while logically a ``word'', may contain
+parentheses or other characters that @value{GDBN} normally excludes from its
+notion of a word.  To permit word completion to work in this situation,
+you may enclose words in @code{'} (single quote marks) in @value{GDBN} commands.
+
+@ifclear CONLY
+The most likely situation where you might need this is in typing the
+name of a C++ function.  This is because C++ allows function overloading
+(multiple definitions of the same function, distinguished by argument
+type).  For example, when you want to set a breakpoint you may need to
+distinguish whether you mean the version of @code{name} that takes an
+@code{int} parameter, @code{name(int)}, or the version that takes a
+@code{float} parameter, @code{name(float)}.  To use the word-completion
+facilities in this situation, type a single quote @code{'} at the
+beginning of the function name.  This alerts @value{GDBN} that it may need to
+consider more information than usual when you press @key{TAB} or
+@kbd{M-?} to request word completion:
+
+@example
+(@value{GDBP}) b 'bubble( @key{M-?}
+bubble(double,double)    bubble(int,int)
+(@value{GDBP}) b 'bubble(
+@end example
+
+In some cases, @value{GDBN} can tell that completing a name requires using
+quotes.  When this happens, @value{GDBN} inserts the quote for you (while
+completing as much as it can) if you do not type the quote in the first
+place:
+
+@example
+(@value{GDBP}) b bub @key{TAB}
+@exdent @value{GDBN} alters your input line to the following, and rings a bell:
+(@value{GDBP}) b 'bubble(
+@end example
+
+@noindent
+In general, @value{GDBN} can tell that a quote is needed (and inserts it) if
+you have not yet started typing the argument list when you ask for
+completion on an overloaded symbol.
+
+For more information about overloaded functions, @pxref{Cplus
+expressions, ,C++ expressions}.  You can use the command @code{set
+overload-resolution off} to disable overload resolution;
+@pxref{Debugging C plus plus, ,@value{GDBN} features for C++}.
+@end ifclear
+
+
+@node Help,  , Completion, Commands
+@section Getting help
+@cindex online documentation
+@kindex help
+
+You can always ask @value{GDBN} itself for information on its commands, 
+using the command @code{help}.
+
+@table @code
+@kindex h
+@item help
+@itemx h
+You can use @code{help} (abbreviated @code{h}) with no arguments to
+display a short list of named classes of commands:
+
+@smallexample
+(@value{GDBP}) help
+List of classes of commands:
+
+running -- Running the program
+stack -- Examining the stack
+data -- Examining data
+breakpoints -- Making program stop at certain points
+files -- Specifying and examining files
+status -- Status inquiries
+support -- Support facilities
+user-defined -- User-defined commands
+aliases -- Aliases of other commands
+obscure -- Obscure features
+
+Type "help" followed by a class name for a list of 
+commands in that class.
+Type "help" followed by command name for full 
+documentation.
+Command name abbreviations are allowed if unambiguous.
+(@value{GDBP})
+@end smallexample
+
+@item help @var{class}
+Using one of the general help classes as an argument, you can get a
+list of the individual commands in that class.  For example, here is the
+help display for the class @code{status}:
+
+@smallexample
+(@value{GDBP}) help status
+Status inquiries.
+
+List of commands:
+
+@c Line break in "show" line falsifies real output, but needed
+@c to fit in smallbook page size.
+show -- Generic command for showing things set
+ with "set"
+info -- Generic command for printing status
+
+Type "help" followed by command name for full 
+documentation.
+Command name abbreviations are allowed if unambiguous.
+(@value{GDBP})
+@end smallexample
+
+@item help @var{command}
+With a command name as @code{help} argument, @value{GDBN} displays a
+short paragraph on how to use that command.
+
+@kindex complete
+@item complete @var{args}
+The @code{complete @var{args}} command lists all the possible completions
+for the beginning of a command.  Use @var{args} to specify the beginning of the
+command you want completed.  For example:
+
+@smallexample
+complete i
+@end smallexample
+
+@noindent results in:
+
+@smallexample
+@group
+info
+inspect
+ignore
+@end group
+@end smallexample
+
+@noindent This is intended for use by @sc{gnu} Emacs.
+@end table
+
+In addition to @code{help}, you can use the @value{GDBN} commands @code{info}
+and @code{show} to inquire about the state of your program, or the state
+of @value{GDBN} itself.  Each command supports many topics of inquiry; this
+manual introduces each of them in the appropriate context.  The listings
+under @code{info} and under @code{show} in the Index point to
+all the sub-commands.  @xref{Index}.
+
+@c @group
+@table @code
+@kindex info
+@kindex i
+@item info
+This command (abbreviated @code{i}) is for describing the state of your
+program.  For example, you can list the arguments given to your program
+with @code{info args}, list the registers currently in use with @code{info
+registers}, or list the breakpoints you have set with @code{info breakpoints}.
+You can get a complete list of the @code{info} sub-commands with
+@w{@code{help info}}.
+
+@kindex set
+@item set
+You can assign the result of an expression to an environment variable with 
+@code{set}.  For example, you can set the @value{GDBN} prompt to a $-sign with
+@code{set prompt $}.
+
+@kindex show
+@item show
+In contrast to @code{info}, @code{show} is for describing the state of 
+@value{GDBN} itself.
+You can change most of the things you can @code{show}, by using the
+related command @code{set}; for example, you can control what number
+system is used for displays with @code{set radix}, or simply inquire
+which is currently in use with @code{show radix}.
+
+@kindex info set
+To display all the settable parameters and their current
+values, you can use @code{show} with no arguments; you may also use
+@code{info set}.  Both commands produce the same display.
+@c FIXME: "info set" violates the rule that "info" is for state of
+@c FIXME...program.  Ck w/ GNU: "info set" to be called something else,
+@c FIXME...or change desc of rule---eg "state of prog and debugging session"?
+@end table
+@c @end group
+
+Here are three miscellaneous @code{show} subcommands, all of which are
+exceptional in lacking corresponding @code{set} commands:
+
+@table @code
+@kindex show version
+@cindex version number
+@item show version
+Show what version of @value{GDBN} is running.  You should include this
+information in @value{GDBN} bug-reports.  If multiple versions of @value{GDBN} are in
+use at your site, you may occasionally want to determine which version
+of @value{GDBN} you are running; as @value{GDBN} evolves, new commands are introduced,
+and old ones may wither away.  The version number is also announced
+when you start @value{GDBN}.
+
+@kindex show copying
+@item show copying
+Display information about permission for copying @value{GDBN}.
+
+@kindex show warranty
+@item show warranty
+Display the @sc{gnu} ``NO WARRANTY'' statement.
+@end table
+
+@node Running, Stopping, Commands, Top
+@chapter Running Programs Under @value{GDBN}
+
+When you run a program under @value{GDBN}, you must first generate
+debugging information when you compile it.
+@ifclear BARETARGET
+You may start @value{GDBN} with its arguments, if any, in an environment 
+of your choice.  You may redirect your program's input and output, debug an
+already running process, or kill a child process.
+@end ifclear
+
+@menu
+* Compilation::                 Compiling for debugging
+* Starting::                    Starting your program
+@ifclear BARETARGET
+* Arguments::                   Your program's arguments
+* Environment::                 Your program's environment
+@end ifclear
+
+* Working Directory::           Your program's working directory
+* Input/Output::                Your program's input and output
+* Attach::                      Debugging an already-running process
+* Kill Process::                Killing the child process
+@ifclear HPPA
+* Process Information::         Additional process information
+@end ifclear
+
+* Threads::                     Debugging programs with multiple threads
+* Processes::                   Debugging programs with multiple processes
+@end menu
+
+@node Compilation, Starting, Running, Running
+@section Compiling for debugging
+
+In order to debug a program effectively, you need to generate
+debugging information when you compile it.  This debugging information
+is stored in the object file; it describes the data type of each
+variable or function and the correspondence between source line numbers
+and addresses in the executable code.
+
+To request debugging information, specify the @samp{-g} option when you run
+the compiler.
+
+Many C compilers are unable to handle the @samp{-g} and @samp{-O}
+options together.  Using those compilers, you cannot generate optimized
+executables containing debugging information.
+
+@ifclear HPPA
+@value{NGCC}, the @sc{gnu} C compiler, supports @samp{-g} with or without
+@end ifclear
+@ifset HPPA
+The HP ANSI C and C++ compilers, as well as @value{NGCC}, the @sc{gnu} C
+compiler, support @samp{-g} with or without
+@end ifset
+@samp{-O}, making it possible to debug optimized code.  We recommend
+that you @emph{always} use @samp{-g} whenever you compile a program.
+You may think your program is correct, but there is no sense in pushing
+your luck.
+
+@cindex optimized code, debugging
+@cindex debugging optimized code
+When you debug a program compiled with @samp{-g -O}, remember that the
+optimizer is rearranging your code; the debugger shows you what is
+really there.  Do not be too surprised when the execution path does not
+exactly match your source file!  An extreme example: if you define a
+variable, but never use it, @value{GDBN} never sees that
+variable---because the compiler optimizes it out of existence.
+
+Some things do not work as well with @samp{-g -O} as with just
+@samp{-g}, particularly on machines with instruction scheduling.  If in
+doubt, recompile with @samp{-g} alone, and if this fixes the problem,
+please report it to us as a bug (including a test case!).
+
+Older versions of the @sc{gnu} C compiler permitted a variant option
+@w{@samp{-gg}} for debugging information.  @value{GDBN} no longer supports this
+format; if your @sc{gnu} C compiler has this option, do not use it.
+
+@need 2000
+@node Starting, Arguments, Compilation, Running
+@section Starting your program
+@cindex starting
+@cindex running
+
+@table @code
+@kindex run
+@item run
+@itemx r
+Use the @code{run} command to start your program under @value{GDBN}.  You must
+first specify the program name
+@ifset VXWORKS
+(except on VxWorks)
+@end ifset
+with an argument to @value{GDBN} (@pxref{Invocation, ,Getting In and
+Out of @value{GDBN}}), or by using the @code{file} or @code{exec-file}
+command (@pxref{Files, ,Commands to specify files}).
+
+@end table
+
+@ifclear BARETARGET
+If you are running your program in an execution environment that
+supports processes, @code{run} creates an inferior process and makes
+that process run your program.  (In environments without processes,
+@code{run} jumps to the start of your program.)
+
+The execution of a program is affected by certain information it
+receives from its superior.  @value{GDBN} provides ways to specify this
+information, which you must do @emph{before} starting your program.  (You
+can change it after starting your program, but such changes only affect
+your program the next time you start it.)  This information may be
+divided into four categories:
+
+@table @asis
+@item The @emph{arguments.}
+Specify the arguments to give your program as the arguments of the
+@code{run} command.  If a shell is available on your target, the shell
+is used to pass the arguments, so that you may use normal conventions
+(such as wildcard expansion or variable substitution) in describing
+the arguments.
+In Unix systems, you can control which shell is used with the
+@code{SHELL} environment variable.
+@xref{Arguments, ,Your program's arguments}.
+
+@item The @emph{environment.}
+Your program normally inherits its environment from @value{GDBN}, but you can
+use the @value{GDBN} commands @code{set environment} and @code{unset
+environment} to change parts of the environment that affect
+your program.  @xref{Environment, ,Your program's environment}.
+
+@item The @emph{working directory.}
+Your program inherits its working directory from @value{GDBN}.  You can set
+the @value{GDBN} working directory with the @code{cd} command in @value{GDBN}.
+@xref{Working Directory, ,Your program's working directory}.
+
+@item The @emph{standard input and output.}
+Your program normally uses the same device for standard input and
+standard output as @value{GDBN} is using.  You can redirect input and output
+in the @code{run} command line, or you can use the @code{tty} command to
+set a different device for your program.
+@xref{Input/Output, ,Your program's input and output}.
+
+@cindex pipes
+@emph{Warning:} While input and output redirection work, you cannot use
+pipes to pass the output of the program you are debugging to another
+program; if you attempt this, @value{GDBN} is likely to wind up debugging the
+wrong program.
+@end table
+@end ifclear
+
+When you issue the @code{run} command, your program begins to execute
+immediately.  @xref{Stopping, ,Stopping and continuing}, for discussion
+of how to arrange for your program to stop.  Once your program has
+stopped, you may call functions in your program, using the @code{print}
+or @code{call} commands.  @xref{Data, ,Examining Data}.
+
+If the modification time of your symbol file has changed since the last
+time @value{GDBN} read its symbols, @value{GDBN} discards its symbol
+table, and reads it again.  When it does this, @value{GDBN} tries to retain
+your current breakpoints.
+
+@ifclear BARETARGET
+@node Arguments, Environment, Starting, Running
+@section Your program's arguments
+
+@cindex arguments (to your program)
+The arguments to your program can be specified by the arguments of the
+@code{run} command.  
+They are passed to a shell, which expands wildcard characters and
+performs redirection of I/O, and thence to your program.  Your
+@code{SHELL} environment variable (if it exists) specifies what shell
+@value{GDBN} uses.  If you do not define @code{SHELL}, @value{GDBN} uses
+@code{/bin/sh}.
+
+@code{run} with no arguments uses the same arguments used by the previous
+@code{run}, or those set by the @code{set args} command.
+
+@kindex set args
+@table @code
+@item set args
+Specify the arguments to be used the next time your program is run.  If
+@code{set args} has no arguments, @code{run} executes your program
+with no arguments.  Once you have run your program with arguments,
+using @code{set args} before the next @code{run} is the only way to run
+it again without arguments.
+
+@kindex show args
+@item show args
+Show the arguments to give your program when it is started.
+@end table
+
+@node Environment, Working Directory, Arguments, Running
+@section Your program's environment
+
+@cindex environment (of your program)
+The @dfn{environment} consists of a set of environment variables and
+their values.  Environment variables conventionally record such things as
+your user name, your home directory, your terminal type, and your search
+path for programs to run.  Usually you set up environment variables with
+the shell and they are inherited by all the other programs you run.  When
+debugging, it can be useful to try running your program with a modified
+environment without having to start @value{GDBN} over again.
+
+@table @code
+@kindex path
+@item path @var{directory}
+Add @var{directory} to the front of the @code{PATH} environment variable
+(the search path for executables), for both @value{GDBN} and your program.
+You may specify several directory names, separated by @samp{:} or
+whitespace.  If @var{directory} is already in the path, it is moved to
+the front, so it is searched sooner.
+
+You can use the string @samp{$cwd} to refer to whatever is the current
+working directory at the time @value{GDBN} searches the path.  If you
+use @samp{.} instead, it refers to the directory where you executed the
+@code{path} command.  @value{GDBN} replaces @samp{.} in the
+@var{directory} argument (with the current path) before adding
+@var{directory} to the search path.
+@c 'path' is explicitly nonrepeatable, but RMS points out it is silly to
+@c document that, since repeating it would be a no-op.
+
+@kindex show paths
+@item show paths
+Display the list of search paths for executables (the @code{PATH}
+environment variable).
+
+@kindex show environment
+@item show environment @r{[}@var{varname}@r{]}
+Print the value of environment variable @var{varname} to be given to
+your program when it starts.  If you do not supply @var{varname},
+print the names and values of all environment variables to be given to
+your program.  You can abbreviate @code{environment} as @code{env}.
+
+@kindex set environment
+@item set environment @var{varname} @r{[}=@r{]} @var{value}
+Set environment variable @var{varname} to @var{value}.  The value
+changes for your program only, not for @value{GDBN} itself.  @var{value} may
+be any string; the values of environment variables are just strings, and
+any interpretation is supplied by your program itself.  The @var{value}
+parameter is optional; if it is eliminated, the variable is set to a
+null value.
+@c "any string" here does not include leading, trailing
+@c blanks. Gnu asks: does anyone care?
+
+For example, this command:
+
+@example
+set env USER = foo
+@end example
+
+@noindent
+tells a Unix program, when subsequently run, that its user is named
+@samp{foo}.  (The spaces around @samp{=} are used for clarity here; they
+are not actually required.)
+
+@kindex unset environment
+@item unset environment @var{varname}
+Remove variable @var{varname} from the environment to be passed to your
+program.  This is different from @samp{set env @var{varname} =};
+@code{unset environment} removes the variable from the environment,
+rather than assigning it an empty value.
+@end table
+
+@emph{Warning:} @value{GDBN} runs your program using the shell indicated
+by your @code{SHELL} environment variable if it exists (or
+@code{/bin/sh} if not).  If your @code{SHELL} variable names a shell
+that runs an initialization file---such as @file{.cshrc} for C-shell, or
+@file{.bashrc} for BASH---any variables you set in that file affect
+your program.  You may wish to move setting of environment variables to
+files that are only run when you sign on, such as @file{.login} or
+@file{.profile}.
+
+@node Working Directory, Input/Output, Environment, Running
+@section Your program's working directory
+
+@cindex working directory (of your program)
+Each time you start your program with @code{run}, it inherits its
+working directory from the current working directory of @value{GDBN}.
+The @value{GDBN} working directory is initially whatever it inherited
+from its parent process (typically the shell), but you can specify a new
+working directory in @value{GDBN} with the @code{cd} command.
+
+The @value{GDBN} working directory also serves as a default for the commands
+that specify files for @value{GDBN} to operate on.  @xref{Files, ,Commands to
+specify files}.
+
+@table @code
+@kindex cd
+@item cd @var{directory}
+Set the @value{GDBN} working directory to @var{directory}.
+
+@kindex pwd
+@item pwd
+Print the @value{GDBN} working directory.
+@end table
+
+@node Input/Output, Attach, Working Directory, Running
+@section Your program's input and output
+
+@cindex redirection
+@cindex i/o
+@cindex terminal
+By default, the program you run under @value{GDBN} does input and output to
+the same terminal that @value{GDBN} uses.  @value{GDBN} switches the terminal 
+to its own terminal modes to interact with you, but it records the terminal
+modes your program was using and switches back to them when you continue
+running your program.
+
+@table @code
+@kindex info terminal
+@item info terminal
+Displays information recorded by @value{GDBN} about the terminal modes your
+program is using.
+@end table
+
+You can redirect your program's input and/or output using shell
+redirection with the @code{run} command.  For example,
+
+@example
+run > outfile
+@end example
+
+@noindent
+starts your program, diverting its output to the file @file{outfile}.
+
+@kindex tty
+@cindex controlling terminal
+Another way to specify where your program should do input and output is
+with the @code{tty} command.  This command accepts a file name as
+argument, and causes this file to be the default for future @code{run}
+commands.  It also resets the controlling terminal for the child
+process, for future @code{run} commands.  For example,
+
+@example
+tty /dev/ttyb
+@end example
+
+@noindent
+directs that processes started with subsequent @code{run} commands
+default to do input and output on the terminal @file{/dev/ttyb} and have
+that as their controlling terminal.
+
+An explicit redirection in @code{run} overrides the @code{tty} command's
+effect on the input/output device, but not its effect on the controlling
+terminal.
+
+When you use the @code{tty} command or redirect input in the @code{run}
+command, only the input @emph{for your program} is affected.  The input
+for @value{GDBN} still comes from your terminal.
+
+@node Attach, Kill Process, Input/Output, Running
+@section Debugging an already-running process
+@kindex attach
+@cindex attach
+
+@table @code
+@item attach @var{process-id}
+This command attaches to a running process---one that was started
+outside @value{GDBN}.  (@code{info files} shows your active
+targets.)  The command takes as argument a process ID.  The usual way to
+find out the process-id of a Unix process is with the @code{ps} utility,
+or with the @samp{jobs -l} shell command.
+
+@code{attach} does not repeat if you press @key{RET} a second time after
+executing the command.
+@end table
+
+To use @code{attach}, your program must be running in an environment
+which supports processes; for example, @code{attach} does not work for
+programs on bare-board targets that lack an operating system.  You must
+also have permission to send the process a signal.
+
+When you use @code{attach}, the debugger finds the program running in
+the process first by looking in the current working directory, then (if
+the program is not found) by using the source file search path
+(@pxref{Source Path, ,Specifying source directories}).  You can also use
+the @code{file} command to load the program.  @xref{Files, ,Commands to
+Specify Files}.
+
+The first thing @value{GDBN} does after arranging to debug the specified
+process is to stop it.  You can examine and modify an attached process
+with all the @value{GDBN} commands that are ordinarily available when you start
+@ifclear HPPA
+processes with @code{run}.  You can insert breakpoints; you can step and
+@end ifclear
+@ifset HPPA
+processes with @code{run}.  You can insert breakpoints (except in shared
+libraries); you can step and
+@end ifset
+continue; you can modify storage.  If you would rather the process
+continue running, you may use the @code{continue} command after
+attaching @value{GDBN} to the process.
+
+@table @code
+@kindex detach
+@item detach
+When you have finished debugging the attached process, you can use the
+@code{detach} command to release it from @value{GDBN} control.  Detaching
+the process continues its execution.  After the @code{detach} command,
+that process and @value{GDBN} become completely independent once more, and you
+are ready to @code{attach} another process or start one with @code{run}.
+@code{detach} does not repeat if you press @key{RET} again after
+executing the command.
+@end table
+
+If you exit @value{GDBN} or use the @code{run} command while you have an
+attached process, you kill that process.  By default, @value{GDBN} asks
+for confirmation if you try to do either of these things; you can
+control whether or not you need to confirm by using the @code{set
+confirm} command (@pxref{Messages/Warnings, ,Optional warnings and
+messages}).
+
+@ifset HPPA
+@node Kill Process, Threads, Attach, Running
+@section Killing the child process
+@end ifset
+@ifclear HPPA
+@node Kill Process, Process Information, Attach, Running
+@section Killing the child process
+@end ifclear
+
+@table @code
+@kindex kill
+@item kill
+Kill the child process in which your program is running under @value{GDBN}.
+@end table
+
+This command is useful if you wish to debug a core dump instead of a
+running process.  @value{GDBN} ignores any core dump file while your program
+is running.
+
+On some operating systems, a program cannot be executed outside @value{GDBN}
+while you have breakpoints set on it inside @value{GDBN}.  You can use the
+@code{kill} command in this situation to permit running your program
+outside the debugger.
+
+The @code{kill} command is also useful if you wish to recompile and
+relink your program, since on many systems it is impossible to modify an
+executable file while it is running in a process.  In this case, when you
+next type @code{run}, @value{GDBN} notices that the file has changed, and
+reads the symbol table again (while trying to preserve your current
+breakpoint settings).
+
+@ifclear HPPA
+@node Process Information, Threads, Kill Process, Running
+@section Additional process information
+
+@kindex /proc
+@cindex process image
+Some operating systems provide a facility called @samp{/proc} that can
+be used to examine the image of a running process using file-system
+subroutines.  If @value{GDBN} is configured for an operating system with this
+facility, the command @code{info proc} is available to report on several
+kinds of information about the process running your program.  
+@code{info proc} works only on SVR4 systems that support @code{procfs}.
+
+@table @code
+@kindex info proc
+@item info proc
+Summarize available information about the process.
+
+@kindex info proc mappings
+@item info proc mappings
+Report on the address ranges accessible in the program, with information
+on whether your program may read, write, or execute each range.
+
+@kindex info proc times
+@item info proc times
+Starting time, user CPU time, and system CPU time for your program and
+its children.
+
+@kindex info proc id
+@item info proc id
+Report on the process IDs related to your program: its own process ID,
+the ID of its parent, the process group ID, and the session ID.
+
+@kindex info proc status
+@item info proc status
+General information on the state of the process.  If the process is
+stopped, this report includes the reason for stopping, and any signal
+received.
+
+@item info proc all
+Show all the above information about the process.
+@end table
+@end ifclear
+
+@ifset HPPA
+@node Threads, Processes, Kill Process, Running
+@section Debugging programs with multiple threads
+@end ifset
+@ifclear HPPA
+@node Threads, Processes, Process Information, Running
+@section Debugging programs with multiple threads
+@end ifclear
+
+@cindex threads of execution
+@cindex multiple threads
+@cindex switching threads
+In some operating systems, such as HP-UX and Solaris, a single program
+may have more than one @dfn{thread} of execution.  The precise semantics
+of threads differ from one operating system to another, but in general
+the threads of a single program are akin to multiple processes---except
+that they share one address space (that is, they can all examine and
+modify the same variables).  On the other hand, each thread has its own
+registers and execution stack, and perhaps private memory.
+
+@value{GDBN} provides these facilities for debugging multi-thread
+programs:
+
+@itemize @bullet
+@item automatic notification of new threads
+@item @samp{thread @var{threadno}}, a command to switch among threads
+@item @samp{info threads}, a command to inquire about existing threads
+@item @samp{thread apply [@var{threadno}] [@var{all}] @var{args}}, 
+a command to apply a command to a list of threads
+@item thread-specific breakpoints
+@end itemize
+
+@ifclear HPPA
+@quotation
+@emph{Warning:} These facilities are not yet available on every
+@value{GDBN} configuration where the operating system supports threads.
+If your @value{GDBN} does not support threads, these commands have no
+effect.  For example, a system without thread support shows no output
+from @samp{info threads}, and always rejects the @code{thread} command,
+like this:
+
+@smallexample
+(@value{GDBP}) info threads
+(@value{GDBP}) thread 1
+Thread ID 1 not known.  Use the "info threads" command to
+see the IDs of currently known threads.
+@end smallexample
+@c FIXME to implementors: how hard would it be to say "sorry, this GDB
+@c                        doesn't support threads"?
+@end quotation
+@end ifclear
+
+@cindex focus of debugging
+@cindex current thread
+The @value{GDBN} thread debugging facility allows you to observe all
+threads while your program runs---but whenever @value{GDBN} takes
+control, one thread in particular is always the focus of debugging.
+This thread is called the @dfn{current thread}.  Debugging commands show
+program information from the perspective of the current thread.
+
+@ifclear HPPA
+@kindex New @var{systag}
+@cindex thread identifier (system)
+@c FIXME-implementors!! It would be more helpful if the [New...] message
+@c included GDB's numeric thread handle, so you could just go to that
+@c thread without first checking `info threads'.
+Whenever @value{GDBN} detects a new thread in your program, it displays
+the target system's identification for the thread with a message in the
+form @samp{[New @var{systag}]}.  @var{systag} is a thread identifier
+whose form varies depending on the particular system.  For example, on
+LynxOS, you might see
+
+@example
+[New process 35 thread 27]
+@end example
+
+@noindent
+when @value{GDBN} notices a new thread.  In contrast, on an SGI system,
+the @var{systag} is simply something like @samp{process 368}, with no
+further qualifier.
+
+@c FIXME!! (1) Does the [New...] message appear even for the very first
+@c         thread of a program, or does it only appear for the
+@c         second---i.e., when it becomes obvious we have a multithread
+@c         program?
+@c         (2) *Is* there necessarily a first thread always?  Or do some
+@c         multithread systems permit starting a program with multiple
+@c         threads ab initio?      
+
+@cindex thread number
+@cindex thread identifier (GDB)
+For debugging purposes, @value{GDBN} associates its own thread
+number---always a single integer---with each thread in your program.
+
+@table @code
+@kindex info threads
+@item info threads
+Display a summary of all threads currently in your
+program.  @value{GDBN} displays for each thread (in this order):
+
+@enumerate
+@item the thread number assigned by @value{GDBN}
+
+@item the target system's thread identifier (@var{systag})
+
+@item the current stack frame summary for that thread
+@end enumerate
+
+@noindent
+An asterisk @samp{*} to the left of the @value{GDBN} thread number
+indicates the current thread.
+
+For example, 
+@end table
+@c end table here to get a little more width for example
+
+@smallexample
+(@value{GDBP}) info threads
+  3 process 35 thread 27  0x34e5 in sigpause ()
+  2 process 35 thread 23  0x34e5 in sigpause ()
+* 1 process 35 thread 13  main (argc=1, argv=0x7ffffff8)
+    at threadtest.c:68
+@end smallexample
+@end ifclear
+@ifset HPPA
+
+@cindex thread number
+@cindex thread identifier (GDB)
+For debugging purposes, @value{GDBN} associates its own thread
+number---a small integer assigned in thread-creation order---with each
+thread in your program.
+
+@kindex New @var{systag}
+@cindex thread identifier (system)
+@c FIXME-implementors!! It would be more helpful if the [New...] message
+@c included GDB's numeric thread handle, so you could just go to that
+@c thread without first checking `info threads'.
+Whenever @value{GDBN} detects a new thread in your program, it displays
+both @value{GDBN}'s thread number and the target system's identification for the thread with a message in the
+form @samp{[New @var{systag}]}.  @var{systag} is a thread identifier
+whose form varies depending on the particular system.  For example, on
+HP-UX, you see
+
+@example
+[New thread 2 (system thread 26594)]
+@end example
+
+@noindent
+when @value{GDBN} notices a new thread. 
+
+@table @code
+@kindex info threads
+@item info threads
+Display a summary of all threads currently in your
+program.  @value{GDBN} displays for each thread (in this order):
+
+@enumerate
+@item the thread number assigned by @value{GDBN}
+
+@item the target system's thread identifier (@var{systag})
+
+@item the current stack frame summary for that thread
+@end enumerate
+
+@noindent
+An asterisk @samp{*} to the left of the @value{GDBN} thread number
+indicates the current thread.
+
+For example, 
+@end table
+@c end table here to get a little more width for example
+
+@example
+(@value{GDBP}) info threads
+    * 3 system thread 26607  worker (wptr=0x7b09c318 "@@") at quicksort.c:137
+      2 system thread 26606  0x7b0030d8 in __ksleep () from /usr/lib/libc.2
+      1 system thread 27905  0x7b003498 in _brk () from /usr/lib/libc.2
+@end example
+@end ifset
+
+@table @code
+@kindex thread @var{threadno}
+@item thread @var{threadno}
+Make thread number @var{threadno} the current thread.  The command
+argument @var{threadno} is the internal @value{GDBN} thread number, as
+shown in the first field of the @samp{info threads} display.
+@value{GDBN} responds by displaying the system identifier of the thread
+you selected, and its current stack frame summary:
+
+@smallexample
+@c FIXME!! This example made up; find a @value{GDBN} w/threads and get real one
+(@value{GDBP}) thread 2
+@ifclear HPPA
+[Switching to process 35 thread 23]
+@end ifclear
+@ifset HPPA
+[Switching to thread 2 (system thread 26594)]
+@end ifset
+0x34e5 in sigpause ()
+@end smallexample
+
+@noindent
+As with the @samp{[New @dots{}]} message, the form of the text after
+@samp{Switching to} depends on your system's conventions for identifying
+threads.  
+
+@kindex thread apply
+@item thread apply [@var{threadno}] [@var{all}]  @var{args}
+The @code{thread apply} command allows you to apply a command to one or
+more threads.  Specify the numbers of the threads that you want affected
+with the command argument @var{threadno}.  @var{threadno} is the internal
+@value{GDBN} thread number, as shown in the first field of the @samp{info
+threads} display.  To apply a command to all threads, use 
+@code{thread apply all} @var{args}. 
+@end table
+
+@cindex automatic thread selection
+@cindex switching threads automatically
+@cindex threads, automatic switching
+Whenever @value{GDBN} stops your program, due to a breakpoint or a
+signal, it automatically selects the thread where that breakpoint or
+signal happened.  @value{GDBN} alerts you to the context switch with a
+message of the form @samp{[Switching to @var{systag}]} to identify the
+thread.
+
+@xref{Thread Stops,,Stopping and starting multi-thread programs}, for
+more information about how @value{GDBN} behaves when you stop and start
+programs with multiple threads.
+
+@xref{Set Watchpoints,,Setting watchpoints}, for information about
+watchpoints in programs with multiple threads.
+@end ifclear
+
+@ifclear HPPA
+@node Processes,  , Threads, Running
+@section Debugging programs with multiple processes
+
+@cindex fork, debugging programs which call
+@cindex multiple processes
+@cindex processes, multiple
+@value{GDBN} has no special support for debugging programs which create
+additional processes using the @code{fork} function.  When a program
+forks, @value{GDBN} will continue to debug the parent process and the
+child process will run unimpeded.  If you have set a breakpoint in any
+code which the child then executes, the child will get a @code{SIGTRAP}
+signal which (unless it catches the signal) will cause it to terminate.
+
+However, if you want to debug the child process there is a workaround
+which isn't too painful.  Put a call to @code{sleep} in the code which
+the child process executes after the fork.  It may be useful to sleep
+only if a certain environment variable is set, or a certain file exists,
+so that the delay need not occur when you don't want to run @value{GDBN}
+on the child.  While the child is sleeping, use the @code{ps} program to
+get its process ID.  Then tell @value{GDBN} (a new invocation of
+@value{GDBN} if you are also debugging the parent process) to attach to
+the child process (see @ref{Attach}).  From that point on you can debug
+the child process just like any other process which you attached to.
+@end ifclear
+@ifset HPPA
+@node Processes,  , Threads, Running
+@section Debugging programs with multiple processes
+
+@cindex fork, debugging programs which call
+@cindex multiple processes
+@cindex processes, multiple
+
+@value{GDBN} provides support for debugging programs that create
+additional processes using the @code{fork} or @code{vfork} function.
+
+By default, when a program forks, @value{GDBN} will continue to debug
+the parent process and the child process will run unimpeded.
+
+If you want to follow the child process instead of the parent process,
+use the command @w{@code{set follow-fork-mode}}.
+
+@table @code
+@kindex set follow-fork-mode
+@item set follow-fork-mode @var{mode}
+Set the debugger response to a program call of @code{fork} or
+@code{vfork}.  A call to @code{fork} or @code{vfork} creates a new
+process.  The @var{mode} can be:
+
+@table @code
+@item parent
+The original process is debugged after a fork.  The child process runs
+unimpeded.
+
+@item child
+The new process is debugged after a fork.  The parent process runs
+unimpeded.
+
+@item ask
+The debugger will ask for one of the above choices.
+@end table
+
+@item show follow-fork-mode
+Display the current debugger response to a fork or vfork call.
+@end table
+
+If you ask to debug a child process and a @code{vfork} is followed by an
+@code{exec}, @value{GDBN} executes the new target up to the first
+breakpoint in the new target.  If you have a breakpoint set on
+@code{main} in your original program, the breakpoint will also be set on
+the child process's @code{main}.
+
+When a child process is spawned by @code{vfork}, you cannot debug the
+child or parent until an @code{exec} call completes.
+
+If you issue a @code{run} command to @value{GDBN} after an @code{exec}
+call executes, the new target restarts.  To restart the parent process,
+use the @code{file} command with the parent executable name as its
+argument.
+
+You can use the @code{catch} command to make @value{GDBN} stop whenever
+a @code{fork}, @code{vfork}, or @code{exec} call is made.  @xref{Set
+Catchpoints, ,Setting catchpoints}.
+@end ifset
+
+@node Stopping, Stack, Running, Top
+@chapter Stopping and Continuing
+
+The principal purposes of using a debugger are so that you can stop your
+program before it terminates; or so that, if your program runs into
+trouble, you can investigate and find out why.
+
+Inside @value{GDBN}, your program may stop for any of several reasons, such
+as
+@ifclear BARETARGET
+a signal,
+@end ifclear
+a breakpoint, or reaching a new line after a @value{GDBN}
+command such as @code{step}.  You may then examine and change
+variables, set new breakpoints or remove old ones, and then continue
+execution.  Usually, the messages shown by @value{GDBN} provide ample
+explanation of the status of your program---but you can also explicitly
+request this information at any time.
+
+@table @code
+@kindex info program
+@item info program
+Display information about the status of your program: whether it is
+running or not,
+@ifclear BARETARGET
+what process it is,
+@end ifclear
+and why it stopped.
+@end table
+
+@menu
+* Breakpoints::                 Breakpoints, watchpoints, and catchpoints
+* Continuing and Stepping::     Resuming execution
+@ifset POSIX
+* Signals::                     Signals
+@end ifset
+
+@ifclear BARETARGET
+* Thread Stops::                Stopping and starting multi-thread programs
+@end ifclear
+
+@end menu
+
+@node Breakpoints, Continuing and Stepping, Stopping, Stopping
+@section Breakpoints, watchpoints, and catchpoints
+
+@cindex breakpoints
+A @dfn{breakpoint} makes your program stop whenever a certain point in
+the program is reached.  For each breakpoint, you can add conditions to
+control in finer detail whether your program stops.  You can set
+breakpoints with the @code{break} command and its variants (@pxref{Set
+Breaks, ,Setting breakpoints}), to specify the place where your program
+should stop by line number, function name or exact address in the
+program.
+
+In HP-UX, SunOS 4.x, SVR4, and Alpha OSF/1 configurations, you can set
+breakpoints in shared libraries before the executable is run.  There is
+a minor limitation on HP-UX systems: you must wait until the executable
+is run in order to set breakpoints in shared library routines that are
+not called directly by the program (for example, routines that are
+arguments in a @code{pthread_create} call).
+
+@cindex watchpoints
+@cindex memory tracing
+@cindex breakpoint on memory address
+@cindex breakpoint on variable modification
+A @dfn{watchpoint} is a special breakpoint that stops your program
+when the value of an expression changes.  You must use a different
+command to set watchpoints (@pxref{Set Watchpoints, ,Setting
+watchpoints}), but aside from that, you can manage a watchpoint like
+any other breakpoint: you enable, disable, and delete both breakpoints
+and watchpoints using the same commands.
+
+You can arrange to have values from your program displayed automatically
+whenever @value{GDBN} stops at a breakpoint.  @xref{Auto Display,,
+Automatic display}.
+
+@cindex catchpoints
+@cindex breakpoint on events
+A @dfn{catchpoint} is another special breakpoint that stops your program
+when a certain kind of event occurs, such as the throwing of a C++
+exception or the loading of a library.  As with watchpoints, you use a
+different command to set a catchpoint (@pxref{Set Catchpoints, ,Setting
+catchpoints}), but aside from that, you can manage a catchpoint like any
+other breakpoint.  (To stop when your program receives a signal, use the
+@code{handle} command; @pxref{Signals, ,Signals}.)
+
+@cindex breakpoint numbers
+@cindex numbers for breakpoints
+@value{GDBN} assigns a number to each breakpoint, watchpoint, or
+catchpoint when you create it; these numbers are successive integers
+starting with one.  In many of the commands for controlling various
+features of breakpoints you use the breakpoint number to say which
+breakpoint you want to change.  Each breakpoint may be @dfn{enabled} or
+@dfn{disabled}; if disabled, it has no effect on your program until you
+enable it again.
+
+@menu
+* Set Breaks::                  Setting breakpoints
+* Set Watchpoints::             Setting watchpoints
+* Set Catchpoints::             Setting catchpoints
+* Delete Breaks::               Deleting breakpoints
+* Disabling::                   Disabling breakpoints
+* Conditions::                  Break conditions
+* Break Commands::              Breakpoint command lists
+@ifclear CONLY
+* Breakpoint Menus::            Breakpoint menus
+@end ifclear
+
+@c  @ifclear BARETARGET
+@c  * Error in Breakpoints::        ``Cannot insert breakpoints''
+@c  @end ifclear
+@end menu
+
+@node Set Breaks, Set Watchpoints, Breakpoints, Breakpoints
+@subsection Setting breakpoints
+
+@c FIXME LMB what does GDB do if no code on line of breakpt?  
+@c       consider in particular declaration with/without initialization.
+@c
+@c FIXME 2 is there stuff on this already? break at fun start, already init?
+
+@kindex break
+@kindex b
+@kindex $bpnum
+@cindex latest breakpoint
+Breakpoints are set with the @code{break} command (abbreviated
+@code{b}).  The debugger convenience variable @samp{$bpnum} records the 
+number of the breakpoints you've set most recently; see @ref{Convenience
+Vars,, Convenience variables}, for a discussion of what you can do with
+convenience variables.
+
+You have several ways to say where the breakpoint should go.
+
+@table @code
+@item break @var{function}
+Set a breakpoint at entry to function @var{function}.  
+@ifclear CONLY
+When using source languages that permit overloading of symbols, such as
+C++, @var{function} may refer to more than one possible place to break.
+@xref{Breakpoint Menus,,Breakpoint menus}, for a discussion of that situation.
+@end ifclear
+
+@item break +@var{offset}
+@itemx break -@var{offset}
+Set a breakpoint some number of lines forward or back from the position
+at which execution stopped in the currently selected frame.
+
+@item break @var{linenum}
+Set a breakpoint at line @var{linenum} in the current source file.
+That file is the last file whose source text was printed.  This
+breakpoint stops your program just before it executes any of the
+code on that line.
+
+@item break @var{filename}:@var{linenum}
+Set a breakpoint at line @var{linenum} in source file @var{filename}.
+
+@item break @var{filename}:@var{function}
+Set a breakpoint at entry to function @var{function} found in file
+@var{filename}.  Specifying a file name as well as a function name is
+superfluous except when multiple files contain similarly named
+functions.
+
+@item break *@var{address}
+Set a breakpoint at address @var{address}.  You can use this to set
+breakpoints in parts of your program which do not have debugging
+information or source files.
+
+@item break
+When called without any arguments, @code{break} sets a breakpoint at
+the next instruction to be executed in the selected stack frame
+(@pxref{Stack, ,Examining the Stack}).  In any selected frame but the
+innermost, this makes your program stop as soon as control
+returns to that frame.  This is similar to the effect of a
+@code{finish} command in the frame inside the selected frame---except
+that @code{finish} does not leave an active breakpoint.  If you use
+@code{break} without an argument in the innermost frame, @value{GDBN} stops
+the next time it reaches the current location; this may be useful
+inside loops.
+
+@value{GDBN} normally ignores breakpoints when it resumes execution, until at
+least one instruction has been executed.  If it did not do this, you
+would be unable to proceed past a breakpoint without first disabling the
+breakpoint.  This rule applies whether or not the breakpoint already
+existed when your program stopped.
+
+@item break @dots{} if @var{cond}
+Set a breakpoint with condition @var{cond}; evaluate the expression
+@var{cond} each time the breakpoint is reached, and stop only if the
+value is nonzero---that is, if @var{cond} evaluates as true.
+@samp{@dots{}} stands for one of the possible arguments described
+above (or no argument) specifying where to break.  @xref{Conditions,
+,Break conditions}, for more information on breakpoint conditions.
+
+@kindex tbreak
+@item tbreak @var{args}
+Set a breakpoint enabled only for one stop.  @var{args} are the
+same as for the @code{break} command, and the breakpoint is set in the same
+way, but the breakpoint is automatically deleted after the first time your
+program stops there.  @xref{Disabling, ,Disabling breakpoints}.
+
+@ifclear HPPA
+@kindex hbreak
+@item hbreak @var{args}
+Set a hardware-assisted breakpoint.  @var{args} are the same as for the 
+@code{break} command and the breakpoint is set in the same way, but the 
+breakpoint requires hardware support and some target hardware may not
+have this support.  The main purpose of this is EPROM/ROM code
+debugging, so you can set a breakpoint at an instruction without 
+changing the instruction.  This can be used with the new trap-generation 
+provided by SPARClite DSU.  DSU will generate traps when a program accesses
+some data or instruction address that is assigned to the debug registers.  
+However the hardware breakpoint registers can only take two data breakpoints,
+and @value{GDBN} will reject this command if more than two are used.  
+Delete or disable unused hardware breakpoints before setting
+new ones.  @xref{Conditions, ,Break conditions}.
+
+@kindex thbreak
+@item thbreak @var{args}
+Set a hardware-assisted breakpoint enabled only for one stop.  @var{args}
+are the same as for the @code{hbreak} command and the breakpoint is set in
+the same way.  However, like the @code{tbreak} command,  
+the breakpoint is automatically deleted after the
+first time your program stops there.  Also, like the @code{hbreak}
+command, the breakpoint requires hardware support and some target hardware 
+may not have this support.  @xref{Disabling, ,Disabling breakpoints}.  
+Also @xref{Conditions, ,Break conditions}.
+@end ifclear
+
+@kindex rbreak
+@cindex regular expression
+@item rbreak @var{regex}
+@c FIXME what kind of regexp?
+Set breakpoints on all functions matching the regular expression
+@var{regex}.  This command
+sets an unconditional breakpoint on all matches, printing a list of all
+breakpoints it set.  Once these breakpoints are set, they are treated
+just like the breakpoints set with the @code{break} command.  You can
+delete them, disable them, or make them conditional the same way as any
+other breakpoint.
+
+@ifclear CONLY
+When debugging C++ programs, @code{rbreak} is useful for setting
+breakpoints on overloaded functions that are not members of any special
+classes.
+@end ifclear
+
+@kindex info breakpoints
+@cindex @code{$_} and @code{info breakpoints}
+@item info breakpoints @r{[}@var{n}@r{]}
+@itemx info break @r{[}@var{n}@r{]}
+@itemx info watchpoints @r{[}@var{n}@r{]}
+Print a table of all breakpoints, watchpoints, and catchpoints set and
+not deleted, with the following columns for each breakpoint:
+
+@table @emph
+@item Breakpoint Numbers
+@item Type
+Breakpoint, watchpoint, or catchpoint.
+@item Disposition
+Whether the breakpoint is marked to be disabled or deleted when hit.
+@item Enabled or Disabled
+Enabled breakpoints are marked with @samp{y}.  @samp{n} marks breakpoints
+that are not enabled.
+@item Address
+Where the breakpoint is in your program, as a memory address
+@item What
+Where the breakpoint is in the source for your program, as a file and
+line number.
+@end table
+
+@noindent
+If a breakpoint is conditional, @code{info break} shows the condition on
+the line following the affected breakpoint; breakpoint commands, if any,
+are listed after that.
+
+@noindent
+@code{info break} with a breakpoint
+number @var{n} as argument lists only that breakpoint.  The
+convenience variable @code{$_} and the default examining-address for
+the @code{x} command are set to the address of the last breakpoint
+listed (@pxref{Memory, ,Examining memory}).  
+
+@noindent
+@code{info break} displays a count of the number of times the breakpoint
+has been hit.  This is especially useful in conjunction with the
+@code{ignore} command.  You can ignore a large number of breakpoint
+hits, look at the breakpoint info to see how many times the breakpoint
+was hit, and then run again, ignoring one less than that number.  This
+will get you quickly to the last hit of that breakpoint.
+@end table
+
+@value{GDBN} allows you to set any number of breakpoints at the same place in
+your program.  There is nothing silly or meaningless about this.  When
+the breakpoints are conditional, this is even useful
+(@pxref{Conditions, ,Break conditions}).
+
+@cindex negative breakpoint numbers
+@cindex internal @value{GDBN} breakpoints
+@value{GDBN} itself sometimes sets breakpoints in your program for special
+purposes, such as proper handling of @code{longjmp} (in C programs).
+These internal breakpoints are assigned negative numbers, starting with
+@code{-1}; @samp{info breakpoints} does not display them.
+
+You can see these breakpoints with the @value{GDBN} maintenance command
+@samp{maint info breakpoints}.
+
+@table @code
+@kindex maint info breakpoints
+@item maint info breakpoints
+Using the same format as @samp{info breakpoints}, display both the
+breakpoints you've set explicitly, and those @value{GDBN} is using for
+internal purposes.  Internal breakpoints are shown with negative
+breakpoint numbers.  The type column identifies what kind of breakpoint
+is shown:
+
+@table @code
+@item breakpoint
+Normal, explicitly set breakpoint.
+
+@item watchpoint
+Normal, explicitly set watchpoint.
+
+@item longjmp
+Internal breakpoint, used to handle correctly stepping through
+@code{longjmp} calls.
+
+@item longjmp resume
+Internal breakpoint at the target of a @code{longjmp}.
+
+@item until
+Temporary internal breakpoint used by the @value{GDBN} @code{until} command.
+
+@item finish
+Temporary internal breakpoint used by the @value{GDBN} @code{finish} command.
+
+@ifset HPPA
+@item shlib events
+Shared library events.
+@end ifset
+@end table
+@end table
+
+
+@node Set Watchpoints, Set Catchpoints, Set Breaks, Breakpoints
+@subsection Setting watchpoints
+
+@cindex setting watchpoints
+@cindex software watchpoints
+@cindex hardware watchpoints
+You can use a watchpoint to stop execution whenever the value of an
+expression changes, without having to predict a particular place where
+this may happen.
+
+Depending on your system, watchpoints may be implemented in software or
+hardware.  GDB does software watchpointing by single-stepping your
+program and testing the variable's value each time, which is hundreds of
+times slower than normal execution.  (But this may still be worth it, to
+catch errors where you have no clue what part of your program is the
+culprit.)
+
+On some systems, such as HP-UX and Linux, GDB includes support for
+hardware watchpoints, which do not slow down the running of your
+program.
+
+@table @code
+@kindex watch
+@item watch @var{expr}
+Set a watchpoint for an expression.  @value{GDBN} will break when @var{expr}
+is written into by the program and its value changes.
+
+@kindex rwatch
+@item rwatch @var{expr}
+Set a watchpoint that will break when watch @var{expr} is read by the program.
+If you use both watchpoints, both must be set with the @code{rwatch}
+command.
+
+@kindex awatch
+@item awatch @var{expr}
+Set a watchpoint that will break when @var{args} is read and written into
+by the program.  If you use both watchpoints, both must be set with the
+@code{awatch} command.
+
+@kindex info watchpoints
+@item info watchpoints
+This command prints a list of watchpoints, breakpoints, and catchpoints;
+it is the same as @code{info break}.
+@end table
+
+@value{GDBN} sets a @dfn{hardware watchpoint} if possible.  Hardware
+watchpoints execute very quickly, and the debugger reports a change in
+value at the exact instruction where the change occurs.  If @value{GDBN}
+cannot set a hardware watchpoint, it sets a software watchpoint, which
+executes more slowly and reports the change in value at the next
+statement, not the instruction, after the change occurs.
+
+When you issue the @code{watch} command, @value{GDBN} reports
+
+@example
+Hardware watchpoint @var{num}: @var{expr}
+@end example
+
+@noindent
+if it was able to set a hardware watchpoint.
+
+The SPARClite DSU will generate traps when a program accesses
+some data or instruction address that is assigned to the debug registers.  
+For the data addresses, DSU facilitates the @code{watch} command.
+However the hardware breakpoint registers can only take two data watchpoints,
+and both watchpoints must be the same kind.  For example, you can set two
+watchpoints with @code{watch} commands, two with @code{rwatch}
+commands, @strong{or} two with @code{awatch} commands, but you cannot set one
+watchpoint with one command and the other with a different command. 
+@value{GDBN} will reject the command if you try to mix watchpoints.
+Delete or disable unused watchpoint commands before setting new ones.
+
+If you call a function interactively using @code{print} or @code{call},
+any watchpoints you have set will be inactive until GDB reaches another
+kind of breakpoint or the call completes.
+
+@ifclear BARETARGET
+@quotation
+@cindex watchpoints and threads
+@cindex threads and watchpoints
+@ifclear HPPA
+@emph{Warning:} In multi-thread programs, watchpoints have only limited
+usefulness.  With the current watchpoint implementation, @value{GDBN}
+can only watch the value of an expression @emph{in a single thread}.  If
+you are confident that the expression can only change due to the current
+thread's activity (and if you are also confident that no other thread
+can become current), then you can use watchpoints as usual.  However,
+@value{GDBN} may not notice when a non-current thread's activity changes
+the expression.
+@end ifclear
+@ifset HPPA
+@emph{Warning:} In multi-thread programs, software watchpoints have only
+limited usefulness.  If @value{GDBN} creates a software watchpoint, it
+can only watch the value of an expression @emph{in a single thread}.  If
+you are confident that the expression can only change due to the current
+thread's activity (and if you are also confident that no other thread
+can become current), then you can use software watchpoints as usual.
+However, @value{GDBN} may not notice when a non-current thread's
+activity changes the expression.  (Hardware watchpoints, in contrast,
+watch an expression in all threads.)
+@end ifset
+@end quotation
+@end ifclear
+
+@node Set Catchpoints, Delete Breaks, Set Watchpoints, Breakpoints
+@subsection Setting catchpoints
+@cindex catchpoints
+@cindex exception handlers
+@cindex event handling
+
+You can use @dfn{catchpoints} to cause the debugger to stop for certain
+kinds of program events, such as C++ exceptions or the loading of a
+shared library.  Use the @code{catch} command to set a catchpoint.
+
+@table @code
+@kindex catch
+@item catch @var{event}
+Stop when @var{event} occurs.  @var{event} can be any of the following:
+@table @code
+@item throw
+@kindex catch throw
+The throwing of a C++ exception.
+
+@item catch
+@kindex catch catch
+The catching of a C++ exception.
+
+@item exec
+@kindex catch exec
+A call to @code{exec}.  This is currently only available for HP-UX.
+
+@item fork
+@kindex catch fork
+A call to @code{fork}.  This is currently only available for HP-UX.
+
+@item vfork
+@kindex catch vfork
+A call to @code{vfork}.  This is currently only available for HP-UX.
+
+@item load
+@itemx load @var{libname}
+@kindex catch load
+The dynamic loading of any shared library, or the loading of the library
+@var{libname}.  This is currently only available for HP-UX.
+
+@item unload
+@itemx unload @var{libname}
+@kindex catch unload
+The unloading of any dynamically loaded shared library, or the unloading
+of the library @var{libname}.  This is currently only available for HP-UX.
+@end table
+
+@item tcatch @var{event}
+Set a catchpoint that is enabled only for one stop.  The catchpoint is
+automatically deleted after the first time the event is caught.
+
+@end table
+
+Use the @code{info break} command to list the current catchpoints.
+
+There are currently some limitations to C++ exception handling
+(@code{catch throw} and @code{catch catch}) in @value{GDBN}:
+
+@itemize @bullet
+@item
+If you call a function interactively, @value{GDBN} normally returns
+control to you when the function has finished executing.  If the call
+raises an exception, however, the call may bypass the mechanism that
+returns control to you and cause your program either to abort or to
+simply continue running until it hits a breakpoint, catches a signal
+that @value{GDBN} is listening for, or exits.  This is the case even if
+you set a catchpoint for the exception; catchpoints on exceptions are
+disabled within interactive calls.
+
+@item
+You cannot raise an exception interactively.
+
+@item
+You cannot install an exception handler interactively.
+@end itemize
+
+@cindex raise exceptions
+Sometimes @code{catch} is not the best way to debug exception handling:
+if you need to know exactly where an exception is raised, it is better to
+stop @emph{before} the exception handler is called, since that way you
+can see the stack before any unwinding takes place.  If you set a
+breakpoint in an exception handler instead, it may not be easy to find
+out where the exception was raised.
+
+To stop just before an exception handler is called, you need some
+knowledge of the implementation.  In the case of @sc{gnu} C++, exceptions are
+raised by calling a library function named @code{__raise_exception}
+which has the following ANSI C interface:
+
+@example
+    /* @var{addr} is where the exception identifier is stored.
+       ID is the exception identifier.  */
+    void __raise_exception (void **@var{addr}, void *@var{id});
+@end example
+
+@noindent
+To make the debugger catch all exceptions before any stack
+unwinding takes place, set a breakpoint on @code{__raise_exception}
+(@pxref{Breakpoints, ,Breakpoints; watchpoints; and exceptions}).
+
+With a conditional breakpoint (@pxref{Conditions, ,Break conditions})
+that depends on the value of @var{id}, you can stop your program when
+a specific exception is raised.  You can use multiple conditional
+breakpoints to stop your program when any of a number of exceptions are
+raised.
+
+
+@node Delete Breaks, Disabling, Set Catchpoints, Breakpoints
+@subsection Deleting breakpoints
+
+@cindex clearing breakpoints, watchpoints, catchpoints
+@cindex deleting breakpoints, watchpoints, catchpoints
+It is often necessary to eliminate a breakpoint, watchpoint, or
+catchpoint once it has done its job and you no longer want your program
+to stop there.  This is called @dfn{deleting} the breakpoint.  A
+breakpoint that has been deleted no longer exists; it is forgotten.
+
+With the @code{clear} command you can delete breakpoints according to
+where they are in your program.  With the @code{delete} command you can
+delete individual breakpoints, watchpoints, or catchpoints by specifying
+their breakpoint numbers.
+
+It is not necessary to delete a breakpoint to proceed past it.  @value{GDBN}
+automatically ignores breakpoints on the first instruction to be executed
+when you continue execution without changing the execution address.
+
+@table @code
+@kindex clear
+@item clear
+Delete any breakpoints at the next instruction to be executed in the
+selected stack frame (@pxref{Selection, ,Selecting a frame}).  When
+the innermost frame is selected, this is a good way to delete a
+breakpoint where your program just stopped.
+
+@item clear @var{function}
+@itemx clear @var{filename}:@var{function}
+Delete any breakpoints set at entry to the function @var{function}.
+
+@item clear @var{linenum}
+@itemx clear @var{filename}:@var{linenum}
+Delete any breakpoints set at or within the code of the specified line.
+
+@cindex delete breakpoints
+@kindex delete
+@kindex d
+@item delete @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
+Delete the breakpoints, watchpoints, or catchpoints of the numbers
+specified as arguments.  If no argument is specified, delete all
+breakpoints (@value{GDBN} asks confirmation, unless you have @code{set
+confirm off}).  You can abbreviate this command as @code{d}.
+@end table
+
+@node Disabling, Conditions, Delete Breaks, Breakpoints
+@subsection Disabling breakpoints
+
+@kindex disable breakpoints
+@kindex enable breakpoints
+Rather than deleting a breakpoint, watchpoint, or catchpoint, you might
+prefer to @dfn{disable} it.  This makes the breakpoint inoperative as if
+it had been deleted, but remembers the information on the breakpoint so
+that you can @dfn{enable} it again later.
+
+You disable and enable breakpoints, watchpoints, and catchpoints with
+the @code{enable} and @code{disable} commands, optionally specifying one
+or more breakpoint numbers as arguments.  Use @code{info break} or
+@code{info watch} to print a list of breakpoints, watchpoints, and
+catchpoints if you do not know which numbers to use.
+
+A breakpoint, watchpoint, or catchpoint can have any of four different
+states of enablement:
+
+@itemize @bullet
+@item
+Enabled.  The breakpoint stops your program.  A breakpoint set
+with the @code{break} command starts out in this state.
+@item
+Disabled.  The breakpoint has no effect on your program.
+@item
+Enabled once.  The breakpoint stops your program, but then becomes
+disabled.  A breakpoint set with the @code{tbreak} command starts out in
+this state.
+@item
+Enabled for deletion.  The breakpoint stops your program, but
+immediately after it does so it is deleted permanently.
+@end itemize
+
+You can use the following commands to enable or disable breakpoints,
+watchpoints, and catchpoints:
+
+@table @code
+@kindex disable breakpoints
+@kindex disable
+@kindex dis
+@item disable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
+Disable the specified breakpoints---or all breakpoints, if none are
+listed.  A disabled breakpoint has no effect but is not forgotten.  All
+options such as ignore-counts, conditions and commands are remembered in
+case the breakpoint is enabled again later.  You may abbreviate
+@code{disable} as @code{dis}.
+
+@kindex enable breakpoints
+@kindex enable
+@item enable @r{[}breakpoints@r{]} @r{[}@var{bnums}@dots{}@r{]}
+Enable the specified breakpoints (or all defined breakpoints).  They
+become effective once again in stopping your program.
+
+@item enable @r{[}breakpoints@r{]} once @var{bnums}@dots{}
+Enable the specified breakpoints temporarily.  @value{GDBN} disables any
+of these breakpoints immediately after stopping your program.
+
+@item enable @r{[}breakpoints@r{]} delete @var{bnums}@dots{}
+Enable the specified breakpoints to work once, then die.  @value{GDBN}
+deletes any of these breakpoints as soon as your program stops there.
+@end table
+
+Except for a breakpoint set with @code{tbreak} (@pxref{Set Breaks,
+,Setting breakpoints}), breakpoints that you set are initially enabled;
+subsequently, they become disabled or enabled only when you use one of
+the commands above.  (The command @code{until} can set and delete a
+breakpoint of its own, but it does not change the state of your other
+breakpoints; see @ref{Continuing and Stepping, ,Continuing and
+stepping}.)
+
+@node Conditions, Break Commands, Disabling, Breakpoints
+@subsection Break conditions
+@cindex conditional breakpoints
+@cindex breakpoint conditions
+
+@c FIXME what is scope of break condition expr?  Context where wanted?
+@c      in particular for a watchpoint?  
+The simplest sort of breakpoint breaks every time your program reaches a
+specified place.  You can also specify a @dfn{condition} for a
+breakpoint.  A condition is just a Boolean expression in your
+programming language (@pxref{Expressions, ,Expressions}).  A breakpoint with
+a condition evaluates the expression each time your program reaches it,
+and your program stops only if the condition is @emph{true}.
+
+This is the converse of using assertions for program validation; in that
+situation, you want to stop when the assertion is violated---that is,
+when the condition is false.  In C, if you want to test an assertion expressed
+by the condition @var{assert}, you should set the condition
+@samp{! @var{assert}} on the appropriate breakpoint.
+
+Conditions are also accepted for watchpoints; you may not need them,
+since a watchpoint is inspecting the value of an expression anyhow---but
+it might be simpler, say, to just set a watchpoint on a variable name,
+and specify a condition that tests whether the new value is an interesting
+one.
+
+Break conditions can have side effects, and may even call functions in
+your program.  This can be useful, for example, to activate functions
+that log program progress, or to use your own print functions to
+format special data structures. The effects are completely predictable
+unless there is another enabled breakpoint at the same address.  (In
+that case, @value{GDBN} might see the other breakpoint first and stop your
+program without checking the condition of this one.)  Note that
+breakpoint commands are usually more convenient and flexible for the
+purpose of performing side effects when a breakpoint is reached
+(@pxref{Break Commands, ,Breakpoint command lists}).
+
+Break conditions can be specified when a breakpoint is set, by using
+@samp{if} in the arguments to the @code{break} command.  @xref{Set
+Breaks, ,Setting breakpoints}.  They can also be changed at any time
+with the @code{condition} command.
+@ifclear HPPA
+@c The watch command now seems to recognize the if keyword.
+@c catch doesn't, though.
+The @code{watch} command does not recognize the @code{if} keyword;
+@code{condition} is the only way to impose a further condition on a
+watchpoint.
+@end ifclear
+@ifset HPPA
+You can also use the @code{if} keyword with the @code{watch} command.
+The @code{catch} command does not recognize the @code{if} keyword;
+@code{condition} is the only way to impose a further condition on a
+catchpoint.
+@end ifset
+
+@table @code
+@kindex condition
+@item condition @var{bnum} @var{expression}
+Specify @var{expression} as the break condition for breakpoint,
+watchpoint, or catchpoint number @var{bnum}.  After you set a condition,
+breakpoint @var{bnum} stops your program only if the value of
+@var{expression} is true (nonzero, in C).  When you use
+@code{condition}, @value{GDBN} checks @var{expression} immediately for
+syntactic correctness, and to determine whether symbols in it have
+referents in the context of your breakpoint.
+@c FIXME so what does GDB do if there is no referent?  Moreover, what
+@c about watchpoints?
+@value{GDBN} does
+not actually evaluate @var{expression} at the time the @code{condition}
+command is given, however.  @xref{Expressions, ,Expressions}.
+
+@item condition @var{bnum}
+Remove the condition from breakpoint number @var{bnum}.  It becomes
+an ordinary unconditional breakpoint.
+@end table
+
+@cindex ignore count (of breakpoint)
+A special case of a breakpoint condition is to stop only when the
+breakpoint has been reached a certain number of times.  This is so
+useful that there is a special way to do it, using the @dfn{ignore
+count} of the breakpoint.  Every breakpoint has an ignore count, which
+is an integer.  Most of the time, the ignore count is zero, and
+therefore has no effect.  But if your program reaches a breakpoint whose
+ignore count is positive, then instead of stopping, it just decrements
+the ignore count by one and continues.  As a result, if the ignore count
+value is @var{n}, the breakpoint does not stop the next @var{n} times
+your program reaches it.
+
+@table @code
+@kindex ignore
+@item ignore @var{bnum} @var{count}
+Set the ignore count of breakpoint number @var{bnum} to @var{count}.
+The next @var{count} times the breakpoint is reached, your program's
+execution does not stop; other than to decrement the ignore count, @value{GDBN}
+takes no action.
+
+To make the breakpoint stop the next time it is reached, specify
+a count of zero.
+
+When you use @code{continue} to resume execution of your program from a
+breakpoint, you can specify an ignore count directly as an argument to
+@code{continue}, rather than using @code{ignore}.  @xref{Continuing and
+Stepping,,Continuing and stepping}.
+
+If a breakpoint has a positive ignore count and a condition, the
+condition is not checked.  Once the ignore count reaches zero,
+@value{GDBN} resumes checking the condition.
+
+You could achieve the effect of the ignore count with a condition such
+as @w{@samp{$foo-- <= 0}} using a debugger convenience variable that
+is decremented each time.  @xref{Convenience Vars, ,Convenience
+variables}.
+@end table
+
+Ignore counts apply to breakpoints, watchpoints, and catchpoints.
+
+
+@node Break Commands, Breakpoint Menus, Conditions, Breakpoints
+@subsection Breakpoint command lists
+
+@cindex breakpoint commands
+You can give any breakpoint (or watchpoint or catchpoint) a series of
+commands to execute when your program stops due to that breakpoint.  For
+example, you might want to print the values of certain expressions, or
+enable other breakpoints.
+
+@table @code
+@kindex commands
+@kindex end
+@item commands @r{[}@var{bnum}@r{]}
+@itemx @dots{} @var{command-list} @dots{}
+@itemx end
+Specify a list of commands for breakpoint number @var{bnum}.  The commands
+themselves appear on the following lines.  Type a line containing just
+@code{end} to terminate the commands.
+
+To remove all commands from a breakpoint, type @code{commands} and
+follow it immediately with @code{end}; that is, give no commands.
+
+With no @var{bnum} argument, @code{commands} refers to the last
+breakpoint, watchpoint, or catchpoint set (not to the breakpoint most
+recently encountered).
+@end table
+
+Pressing @key{RET} as a means of repeating the last @value{GDBN} command is
+disabled within a @var{command-list}.
+
+You can use breakpoint commands to start your program up again.  Simply
+use the @code{continue} command, or @code{step}, or any other command
+that resumes execution.
+
+Any other commands in the command list, after a command that resumes
+execution, are ignored.  This is because any time you resume execution
+(even with a simple @code{next} or @code{step}), you may encounter
+another breakpoint---which could have its own command list, leading to
+ambiguities about which list to execute.
+
+@kindex silent
+If the first command you specify in a command list is @code{silent}, the
+usual message about stopping at a breakpoint is not printed.  This may
+be desirable for breakpoints that are to print a specific message and
+then continue.  If none of the remaining commands print anything, you
+see no sign that the breakpoint was reached.  @code{silent} is
+meaningful only at the beginning of a breakpoint command list.
+
+The commands @code{echo}, @code{output}, and @code{printf} allow you to
+print precisely controlled output, and are often useful in silent
+breakpoints.  @xref{Output, ,Commands for controlled output}.
+
+For example, here is how you could use breakpoint commands to print the
+value of @code{x} at entry to @code{foo} whenever @code{x} is positive.
+
+@example
+break foo if x>0
+commands
+silent
+printf "x is %d\n",x
+cont
+end
+@end example
+
+One application for breakpoint commands is to compensate for one bug so
+you can test for another.  Put a breakpoint just after the erroneous line
+of code, give it a condition to detect the case in which something
+erroneous has been done, and give it commands to assign correct values
+to any variables that need them.  End with the @code{continue} command
+so that your program does not stop, and start with the @code{silent}
+command so that no output is produced.  Here is an example:
+
+@example
+break 403
+commands
+silent
+set x = y + 4
+cont
+end
+@end example
+
+@ifclear CONLY
+@node Breakpoint Menus,  , Break Commands, Breakpoints
+@subsection Breakpoint menus
+@cindex overloading
+@cindex symbol overloading
+
+Some programming languages (notably C++) permit a single function name
+to be defined several times, for application in different contexts.
+This is called @dfn{overloading}.  When a function name is overloaded,
+@samp{break @var{function}} is not enough to tell @value{GDBN} where you want
+a breakpoint.  If you realize this is a problem, you can use
+something like @samp{break @var{function}(@var{types})} to specify which
+particular version of the function you want.  Otherwise, @value{GDBN} offers
+you a menu of numbered choices for different possible breakpoints, and
+waits for your selection with the prompt @samp{>}.  The first two
+options are always @samp{[0] cancel} and @samp{[1] all}.  Typing @kbd{1}
+sets a breakpoint at each definition of @var{function}, and typing
+@kbd{0} aborts the @code{break} command without setting any new
+breakpoints.
+
+For example, the following session excerpt shows an attempt to set a
+breakpoint at the overloaded symbol @code{String::after}.
+We choose three particular definitions of that function name:
+
+@c FIXME! This is likely to change to show arg type lists, at least
+@smallexample
+@group
+(@value{GDBP}) b String::after
+[0] cancel
+[1] all
+[2] file:String.cc; line number:867
+[3] file:String.cc; line number:860
+[4] file:String.cc; line number:875
+[5] file:String.cc; line number:853
+[6] file:String.cc; line number:846
+[7] file:String.cc; line number:735
+> 2 4 6
+Breakpoint 1 at 0xb26c: file String.cc, line 867.
+Breakpoint 2 at 0xb344: file String.cc, line 875.
+Breakpoint 3 at 0xafcc: file String.cc, line 846.
+Multiple breakpoints were set.
+Use the "delete" command to delete unwanted
+ breakpoints.
+(@value{GDBP})
+@end group
+@end smallexample
+@end ifclear
+
+@c  @ifclear BARETARGET
+@c  @node Error in Breakpoints
+@c  @subsection ``Cannot insert breakpoints''
+@c
+@c  FIXME!! 14/6/95  Is there a real example of this?  Let's use it.
+@c
+@c  Under some operating systems, breakpoints cannot be used in a program if
+@c  any other process is running that program.  In this situation,
+@c  attempting to run or continue a program with a breakpoint causes 
+@c  @value{GDBN} to stop the other process.
+@c
+@c  When this happens, you have three ways to proceed:
+@c
+@c  @enumerate
+@c  @item
+@c  Remove or disable the breakpoints, then continue.
+@c
+@c  @item
+@c  Suspend @value{GDBN}, and copy the file containing your program to a new 
+@c  name.  Resume @value{GDBN} and use the @code{exec-file} command to specify
+@c  that @value{GDBN} should run your program under that name.  
+@c  Then start your program again.
+@c
+@c  @item
+@c  Relink your program so that the text segment is nonsharable, using the
+@c  linker option @samp{-N}.  The operating system limitation may not apply
+@c  to nonsharable executables.
+@c  @end enumerate
+@c  @end ifclear
+
+@node Continuing and Stepping, Signals, Breakpoints, Stopping
+@section Continuing and stepping
+
+@cindex stepping
+@cindex continuing
+@cindex resuming execution
+@dfn{Continuing} means resuming program execution until your program
+completes normally.  In contrast, @dfn{stepping} means executing just
+one more ``step'' of your program, where ``step'' may mean either one
+line of source code, or one machine instruction (depending on what
+particular command you use).  Either when continuing
+or when stepping, your program may stop even sooner, due to 
+@ifset BARETARGET
+a breakpoint.
+@end ifset
+@ifclear BARETARGET
+a breakpoint or a signal.  (If due to a signal, you may want to use
+@code{handle}, or use @samp{signal 0} to resume execution.
+@xref{Signals, ,Signals}.)
+@end ifclear
+
+@table @code
+@kindex continue
+@kindex c
+@kindex fg
+@item continue @r{[}@var{ignore-count}@r{]}
+@itemx c @r{[}@var{ignore-count}@r{]}
+@itemx fg @r{[}@var{ignore-count}@r{]}
+Resume program execution, at the address where your program last stopped;
+any breakpoints set at that address are bypassed.  The optional argument
+@var{ignore-count} allows you to specify a further number of times to
+ignore a breakpoint at this location; its effect is like that of
+@code{ignore} (@pxref{Conditions, ,Break conditions}).
+
+The argument @var{ignore-count} is meaningful only when your program
+stopped due to a breakpoint.  At other times, the argument to
+@code{continue} is ignored.
+
+The synonyms @code{c} and @code{fg} are provided purely for convenience,
+and have exactly the same behavior as @code{continue}.
+@end table
+
+To resume execution at a different place, you can use @code{return}
+(@pxref{Returning, ,Returning from a function}) to go back to the
+calling function; or @code{jump} (@pxref{Jumping, ,Continuing at a
+different address}) to go to an arbitrary location in your program.
+
+A typical technique for using stepping is to set a breakpoint
+(@pxref{Breakpoints, ,Breakpoints; watchpoints; and catchpoints}) at the
+beginning of the function or the section of your program where a problem
+is believed to lie, run your program until it stops at that breakpoint,
+and then step through the suspect area, examining the variables that are
+interesting, until you see the problem happen.
+
+@table @code
+@kindex step
+@kindex s
+@item step
+Continue running your program until control reaches a different source
+line, then stop it and return control to @value{GDBN}.  This command is
+abbreviated @code{s}.
+
+@quotation
+@c "without debugging information" is imprecise; actually "without line
+@c numbers in the debugging information".  (gcc -g1 has debugging info but
+@c not line numbers).  But it seems complex to try to make that
+@c distinction here.
+@emph{Warning:} If you use the @code{step} command while control is
+within a function that was compiled without debugging information,
+execution proceeds until control reaches a function that does have
+debugging information.  Likewise, it will not step into a function which
+is compiled without debugging information.  To step through functions
+without debugging information, use the @code{stepi} command, described
+below.
+@end quotation
+
+The @code{step} command now only stops at the first instruction of a
+source line.  This prevents the multiple stops that used to occur in
+switch statements, for loops, etc.  @code{step} continues to stop if a
+function that has debugging information is called within the line.
+
+Also, the @code{step} command now only enters a subroutine if there is line
+number information for the subroutine.  Otherwise it acts like the
+@code{next} command.  This avoids problems when using @code{cc -gl} 
+on MIPS machines.  Previously, @code{step} entered subroutines if there
+was any debugging information about the routine.  
+
+@item step @var{count}
+Continue running as in @code{step}, but do so @var{count} times.  If a
+breakpoint is reached,
+@ifclear BARETARGET
+or a signal not related to stepping occurs before @var{count} steps,
+@end ifclear
+stepping stops right away.
+
+@kindex next
+@kindex n
+@item next @r{[}@var{count}@r{]}
+Continue to the next source line in the current (innermost) stack frame.
+This is similar to @code{step}, but function calls that appear within the line
+of code are executed without stopping.  Execution stops when control
+reaches a different line of code at the original stack level that was 
+executing when you gave the @code{next} command.  This command is abbreviated
+@code{n}.
+
+An argument @var{count} is a repeat count, as for @code{step}.
+
+
+@c  FIX ME!!  Do we delete this, or is there a way it fits in with
+@c  the following paragraph?   ---  Vctoria
+@c
+@c  @code{next} within a function that lacks debugging information acts like
+@c  @code{step}, but any function calls appearing within the code of the
+@c  function are executed without stopping.
+
+The @code{next} command now only stops at the first instruction of a
+source line.  This prevents the multiple stops that used to occur in
+switch statements, for loops, etc. 
+
+@kindex finish
+@item finish
+Continue running until just after function in the selected stack frame
+returns.  Print the returned value (if any).
+
+Contrast this with the @code{return} command (@pxref{Returning,
+,Returning from a function}).
+
+@kindex until
+@kindex u
+@item until
+@itemx u
+Continue running until a source line past the current line, in the
+current stack frame, is reached.  This command is used to avoid single
+stepping through a loop more than once.  It is like the @code{next}
+command, except that when @code{until} encounters a jump, it
+automatically continues execution until the program counter is greater
+than the address of the jump.
+
+This means that when you reach the end of a loop after single stepping
+though it, @code{until} makes your program continue execution until it
+exits the loop.  In contrast, a @code{next} command at the end of a loop
+simply steps back to the beginning of the loop, which forces you to step
+through the next iteration.
+
+@code{until} always stops your program if it attempts to exit the current
+stack frame.
+
+@code{until} may produce somewhat counterintuitive results if the order
+of machine code does not match the order of the source lines.  For
+example, in the following excerpt from a debugging session, the @code{f}
+(@code{frame}) command shows that execution is stopped at line
+@code{206}; yet when we use @code{until}, we get to line @code{195}:
+
+@example
+(@value{GDBP}) f
+#0  main (argc=4, argv=0xf7fffae8) at m4.c:206
+206                 expand_input();
+(@value{GDBP}) until
+195             for ( ; argc > 0; NEXTARG) @{
+@end example
+
+This happened because, for execution efficiency, the compiler had
+generated code for the loop closure test at the end, rather than the
+start, of the loop---even though the test in a C @code{for}-loop is
+written before the body of the loop.  The @code{until} command appeared
+to step back to the beginning of the loop when it advanced to this
+expression; however, it has not really gone to an earlier
+statement---not in terms of the actual machine code.
+
+@code{until} with no argument works by means of single
+instruction stepping, and hence is slower than @code{until} with an
+argument.
+
+@item until @var{location}
+@itemx u @var{location}
+Continue running your program until either the specified location is
+reached, or the current stack frame returns.  @var{location} is any of
+the forms of argument acceptable to @code{break} (@pxref{Set Breaks,
+,Setting breakpoints}).  This form of the command uses breakpoints,
+and hence is quicker than @code{until} without an argument.
+
+@kindex stepi
+@kindex si
+@item stepi
+@itemx si
+Execute one machine instruction, then stop and return to the debugger.
+
+It is often useful to do @samp{display/i $pc} when stepping by machine
+instructions.  This makes @value{GDBN} automatically display the next
+instruction to be executed, each time your program stops.  @xref{Auto
+Display,, Automatic display}.
+
+An argument is a repeat count, as in @code{step}.
+
+@need 750
+@kindex nexti
+@kindex ni
+@item nexti
+@itemx ni
+Execute one machine instruction, but if it is a function call,
+proceed until the function returns.
+
+An argument is a repeat count, as in @code{next}.
+@end table
+
+@ifset POSIX
+@node Signals, Thread Stops, Continuing and Stepping, Stopping
+@section Signals
+@cindex signals
+
+A signal is an asynchronous event that can happen in a program.  The
+operating system defines the possible kinds of signals, and gives each
+kind a name and a number.  For example, in Unix @code{SIGINT} is the
+signal a program gets when you type an interrupt (often @kbd{C-c});
+@code{SIGSEGV} is the signal a program gets from referencing a place in
+memory far away from all the areas in use; @code{SIGALRM} occurs when
+the alarm clock timer goes off (which happens only if your program has
+requested an alarm).
+
+@cindex fatal signals
+Some signals, including @code{SIGALRM}, are a normal part of the
+functioning of your program.  Others, such as @code{SIGSEGV}, indicate
+errors; these signals are @dfn{fatal} (kill your program immediately) if the
+program has not specified in advance some other way to handle the signal.
+@code{SIGINT} does not indicate an error in your program, but it is normally
+fatal so it can carry out the purpose of the interrupt: to kill the program.
+
+@value{GDBN} has the ability to detect any occurrence of a signal in your
+program.  You can tell @value{GDBN} in advance what to do for each kind of
+signal.
+
+@cindex handling signals
+Normally, @value{GDBN} is set up to ignore non-erroneous signals like @code{SIGALRM}
+(so as not to interfere with their role in the functioning of your program)
+but to stop your program immediately whenever an error signal happens.
+You can change these settings with the @code{handle} command.
+
+@table @code
+@kindex info signals
+@item info signals
+Print a table of all the kinds of signals and how @value{GDBN} has been told to
+handle each one.  You can use this to see the signal numbers of all
+the defined types of signals.
+
+@code{info handle} is the new alias for @code{info signals}.
+
+@kindex handle
+@item handle @var{signal} @var{keywords}@dots{}
+Change the way @value{GDBN} handles signal @var{signal}.  @var{signal} can 
+be the number of a signal or its name (with or without the @samp{SIG} at the
+beginning).  The @var{keywords} say what change to make.
+@end table
+
+@c @group
+The keywords allowed by the @code{handle} command can be abbreviated.
+Their full names are:
+
+@table @code
+@item nostop
+@value{GDBN} should not stop your program when this signal happens.  It may
+still print a message telling you that the signal has come in.
+
+@item stop
+@value{GDBN} should stop your program when this signal happens.  This implies
+the @code{print} keyword as well.
+
+@item print
+@value{GDBN} should print a message when this signal happens.
+
+@item noprint
+@value{GDBN} should not mention the occurrence of the signal at all.  This
+implies the @code{nostop} keyword as well.
+
+@item pass
+@value{GDBN} should allow your program to see this signal; your program
+can handle the signal, or else it may terminate if the signal is fatal
+and not handled.
+
+@item nopass
+@value{GDBN} should not allow your program to see this signal.
+@end table
+@c @end group
+
+When a signal stops your program, the signal is not visible until you
+continue.  Your program sees the signal then, if @code{pass} is in
+effect for the signal in question @emph{at that time}.  In other words,
+after @value{GDBN} reports a signal, you can use the @code{handle}
+command with @code{pass} or @code{nopass} to control whether your
+program sees that signal when you continue.
+
+You can also use the @code{signal} command to prevent your program from
+seeing a signal, or cause it to see a signal it normally would not see,
+or to give it any signal at any time.  For example, if your program stopped
+due to some sort of memory reference error, you might store correct
+values into the erroneous variables and continue, hoping to see more
+execution; but your program would probably terminate immediately as
+a result of the fatal signal once it saw the signal.  To prevent this,
+you can continue with @samp{signal 0}.  @xref{Signaling, ,Giving your
+program a signal}. 
+@end ifset
+
+@ifclear BARETARGET
+@node Thread Stops,  , Signals, Stopping
+@section Stopping and starting multi-thread programs
+
+When your program has multiple threads (@pxref{Threads,, Debugging
+programs with multiple threads}), you can choose whether to set
+breakpoints on all threads, or on a particular thread.
+
+@table @code
+@cindex breakpoints and threads
+@cindex thread breakpoints
+@kindex break @dots{} thread @var{threadno}
+@item break @var{linespec} thread @var{threadno}
+@itemx break @var{linespec} thread @var{threadno} if @dots{}
+@var{linespec} specifies source lines; there are several ways of
+writing them, but the effect is always to specify some source line.
+
+Use the qualifier @samp{thread @var{threadno}} with a breakpoint command
+to specify that you only want @value{GDBN} to stop the program when a
+particular thread reaches this breakpoint.  @var{threadno} is one of the
+numeric thread identifiers assigned by @value{GDBN}, shown in the first
+column of the @samp{info threads} display.
+
+If you do not specify @samp{thread @var{threadno}} when you set a
+breakpoint, the breakpoint applies to @emph{all} threads of your
+program.
+
+You can use the @code{thread} qualifier on conditional breakpoints as
+well; in this case, place @samp{thread @var{threadno}} before the
+breakpoint condition, like this:
+
+@smallexample
+(gdb) break frik.c:13 thread 28 if bartab > lim
+@end smallexample
+
+@end table
+
+@cindex stopped threads
+@cindex threads, stopped
+Whenever your program stops under @value{GDBN} for any reason,
+@emph{all} threads of execution stop, not just the current thread.  This
+allows you to examine the overall state of the program, including
+switching between threads, without worrying that things may change
+underfoot.
+
+@cindex continuing threads
+@cindex threads, continuing
+Conversely, whenever you restart the program, @emph{all} threads start
+executing.  @emph{This is true even when single-stepping} with commands
+like @code{step} or @code{next}.  
+
+In particular, @value{GDBN} cannot single-step all threads in lockstep.
+Since thread scheduling is up to your debugging target's operating
+system (not controlled by @value{GDBN}), other threads may
+execute more than one statement while the current thread completes a
+single step.  Moreover, in general other threads stop in the middle of a
+statement, rather than at a clean statement boundary, when the program
+stops.
+
+You might even find your program stopped in another thread after
+continuing or even single-stepping.  This happens whenever some other
+thread runs into a breakpoint, a signal, or an exception before the
+first thread completes whatever you requested.
+
+On some OSes, you can lock the OS scheduler and thus allow only a single
+thread to run.
+
+@table @code
+@item set scheduler-locking @var{mode}
+Set the scheduler locking mode.  If it is @code{off}, then there is no
+locking and any thread may run at any time.  If @code{on}, then only the
+current thread may run when the inferior is resumed.  The @code{step}
+mode optimizes for single-stepping.  It stops other threads from
+``seizing the prompt'' by preempting the current thread while you are
+stepping.  Other threads will only rarely (or never) get a chance to run
+when you step.  They are more likely to run when you ``next'' over a
+function call, and they are completely free to run when you use commands
+like ``continue'', ``until'', or ``finish''.  However, unless another
+thread hits a breakpoint during its timeslice, they will never steal the
+GDB prompt away from the thread that you are debugging.
+
+@item show scheduler-locking
+Display the current scheduler locking mode.
+@end table
+
+@end ifclear
+
+
+@node Stack, Source, Stopping, Top
+@chapter Examining the Stack
+
+When your program has stopped, the first thing you need to know is where it
+stopped and how it got there.
+
+@cindex call stack
+Each time your program performs a function call, information about the call 
+is generated. 
+That information includes the location of the call in your program, 
+the arguments of the call, 
+and the local variables of the function being called.
+The information is saved in a block of data called a @dfn{stack frame}.  
+The stack frames are allocated in a region of memory called the @dfn{call
+stack}.
+
+When your program stops, the @value{GDBN} commands for examining the
+stack allow you to see all of this information.
+
+@cindex selected frame
+One of the stack frames is @dfn{selected} by @value{GDBN} and many
+@value{GDBN} commands refer implicitly to the selected frame.  In
+particular, whenever you ask @value{GDBN} for the value of a variable in
+your program, the value is found in the selected frame.  There are
+special @value{GDBN} commands to select whichever frame you are
+interested in. @xref{Selection, ,Selecting a frame}.
+
+When your program stops, @value{GDBN} automatically selects the
+currently executing frame and describes it briefly, similar to the 
+@code{frame} command (@pxref{Frame Info, ,Information about a frame}).
+
+@menu
+* Frames::                      Stack frames
+* Backtrace::                   Backtraces
+* Selection::                   Selecting a frame
+* Frame Info::                  Information on a frame
+* Alpha/MIPS Stack::            Alpha and MIPS machines and the function stack
+
+@end menu
+
+@node Frames, Backtrace, Stack, Stack
+@section Stack frames
+
+@cindex frame
+@cindex stack frame
+The call stack is divided up into contiguous pieces called @dfn{stack
+frames}, or @dfn{frames} for short; each frame is the data associated
+with one call to one function.  The frame contains the arguments given
+to the function, the function's local variables, and the address at
+which the function is executing.
+
+@cindex initial frame
+@cindex outermost frame
+@cindex innermost frame
+When your program is started, the stack has only one frame, that of the
+function @code{main}.  This is called the @dfn{initial} frame or the
+@dfn{outermost} frame.  Each time a function is called, a new frame is
+made.  Each time a function returns, the frame for that function invocation
+is eliminated.  If a function is recursive, there can be many frames for
+the same function.  The frame for the function in which execution is
+actually occurring is called the @dfn{innermost} frame.  This is the most
+recently created of all the stack frames that still exist.
+
+@cindex frame pointer
+Inside your program, stack frames are identified by their addresses.  A
+stack frame consists of many bytes, each of which has its own address; each
+kind of computer has a convention for choosing one byte whose
+address serves as the address of the frame.  Usually this address is kept
+in a register called the @dfn{frame pointer register} while execution is
+going on in that frame.
+
+@cindex frame number
+@value{GDBN} assigns numbers to all existing stack frames, starting with
+zero for the innermost frame, one for the frame that called it,
+and so on upward.  These numbers do not really exist in your program;
+they are assigned by @value{GDBN} to give you a way of designating stack
+frames in @value{GDBN} commands.
+
+@c below produces an acceptable overful hbox. --mew 13aug1993
+@cindex frameless execution
+Some compilers provide a way to compile functions so that they operate
+without stack frames.  (For example, the @code{@value{GCC}} option
+@samp{-fomit-frame-pointer} generates functions without a frame.)
+This is occasionally done with heavily used library functions to save
+the frame setup time.  @value{GDBN} has limited facilities for dealing
+with these function invocations.  If the innermost function invocation
+has no stack frame, @value{GDBN} nevertheless regards it as though
+it had a separate frame, which is numbered zero as usual, allowing
+correct tracing of the function call chain.  However, @value{GDBN} has
+no provision for frameless functions elsewhere in the stack.
+
+@table @code
+@kindex frame
+@item frame @var{args}
+The @code{frame} command allows you to move from one stack frame to another, 
+and to print the stack frame you select.  @var{args} may be either the
+address of the frame or the stack frame number.  Without an argument, 
+@code{frame} prints the current stack frame.  
+
+@kindex select-frame
+@item select-frame
+The @code{select-frame} command allows you to move from one stack frame
+to another without printing the frame.  This is the silent version of
+@code{frame}.
+@end table
+
+@node Backtrace, Selection, Frames, Stack
+@section Backtraces
+
+@cindex backtraces
+@cindex tracebacks
+@cindex stack traces
+A backtrace is a summary of how your program got where it is.  It shows one
+line per frame, for many frames, starting with the currently executing
+frame (frame zero), followed by its caller (frame one), and on up the
+stack.
+
+@table @code
+@kindex backtrace
+@kindex bt
+@item backtrace
+@itemx bt
+Print a backtrace of the entire stack: one line per frame for all
+frames in the stack.
+
+You can stop the backtrace at any time by typing the system interrupt
+character, normally @kbd{C-c}.
+
+@item backtrace @var{n}
+@itemx bt @var{n}
+Similar, but print only the innermost @var{n} frames.
+
+@item backtrace -@var{n}
+@itemx bt -@var{n}
+Similar, but print only the outermost @var{n} frames.
+@end table
+
+@kindex where
+@kindex info stack
+@kindex info s
+The names @code{where} and @code{info stack} (abbreviated @code{info s})
+are additional aliases for @code{backtrace}.
+
+Each line in the backtrace shows the frame number and the function name.
+The program counter value is also shown---unless you use @code{set
+print address off}.  The backtrace also shows the source file name and
+line number, as well as the arguments to the function.  The program
+counter value is omitted if it is at the beginning of the code for that
+line number.
+
+Here is an example of a backtrace.  It was made with the command
+@samp{bt 3}, so it shows the innermost three frames.
+
+@smallexample
+@group
+#0  m4_traceon (obs=0x24eb0, argc=1, argv=0x2b8c8) 
+    at builtin.c:993
+#1  0x6e38 in expand_macro (sym=0x2b600) at macro.c:242
+#2  0x6840 in expand_token (obs=0x0, t=177664, td=0xf7fffb08)
+    at macro.c:71
+(More stack frames follow...)
+@end group
+@end smallexample
+
+@noindent
+The display for frame zero does not begin with a program counter
+value, indicating that your program has stopped at the beginning of the
+code for line @code{993} of @code{builtin.c}.
+
+@node Selection, Frame Info, Backtrace, Stack
+@section Selecting a frame
+
+Most commands for examining the stack and other data in your program work on
+whichever stack frame is selected at the moment.  Here are the commands for
+selecting a stack frame; all of them finish by printing a brief description
+of the stack frame just selected.
+
+@table @code
+@kindex frame
+@kindex f
+@item frame @var{n}
+@itemx f @var{n}
+Select frame number @var{n}.  Recall that frame zero is the innermost
+(currently executing) frame, frame one is the frame that called the
+innermost one, and so on.  The highest-numbered frame is the one for
+@code{main}.
+
+@item frame @var{addr}
+@itemx f @var{addr}
+Select the frame at address @var{addr}.  This is useful mainly if the
+chaining of stack frames has been damaged by a bug, making it
+impossible for @value{GDBN} to assign numbers properly to all frames.  In
+addition, this can be useful when your program has multiple stacks and
+switches between them.
+
+@ifclear H8EXCLUSIVE
+@ifclear HPPA
+On the SPARC architecture, @code{frame} needs two addresses to
+select an arbitrary frame: a frame pointer and a stack pointer.
+
+On the MIPS and Alpha architecture, it needs two addresses: a stack
+pointer and a program counter.
+
+On the 29k architecture, it needs three addresses: a register stack
+pointer, a program counter, and a memory stack pointer.
+@c note to future updaters: this is conditioned on a flag
+@c SETUP_ARBITRARY_FRAME in the tm-*.h files.  The above is up to date
+@c as of 27 Jan 1994.
+@end ifclear
+@end ifclear
+
+@kindex up
+@item up @var{n}
+Move @var{n} frames up the stack.  For positive numbers @var{n}, this
+advances toward the outermost frame, to higher frame numbers, to frames
+that have existed longer.  @var{n} defaults to one.
+
+@kindex down
+@kindex do
+@item down @var{n}
+Move @var{n} frames down the stack.  For positive numbers @var{n}, this
+advances toward the innermost frame, to lower frame numbers, to frames
+that were created more recently.  @var{n} defaults to one.  You may
+abbreviate @code{down} as @code{do}.
+@end table
+
+All of these commands end by printing two lines of output describing the
+frame.  The first line shows the frame number, the function name, the
+arguments, and the source file and line number of execution in that
+frame.  The second line shows the text of that source line.  
+
+@need 1000
+For example:
+
+@smallexample
+@group
+(@value{GDBP}) up
+#1  0x22f0 in main (argc=1, argv=0xf7fffbf4, env=0xf7fffbfc)
+    at env.c:10
+10              read_input_file (argv[i]);
+@end group
+@end smallexample
+
+After such a printout, the @code{list} command with no arguments
+prints ten lines centered on the point of execution in the frame.
+@xref{List, ,Printing source lines}.
+
+@table @code
+@kindex down-silently
+@kindex up-silently
+@item up-silently @var{n}
+@itemx down-silently @var{n}
+These two commands are variants of @code{up} and @code{down},
+respectively; they differ in that they do their work silently, without
+causing display of the new frame.  They are intended primarily for use
+in @value{GDBN} command scripts, where the output might be unnecessary and
+distracting.
+@end table
+
+@node Frame Info, Alpha/MIPS Stack, Selection, Stack
+@section Information about a frame
+
+There are several other commands to print information about the selected
+stack frame.
+
+@table @code
+@item frame
+@itemx f
+When used without any argument, this command does not change which
+frame is selected, but prints a brief description of the currently
+selected stack frame.  It can be abbreviated @code{f}.  With an
+argument, this command is used to select a stack frame.
+@xref{Selection, ,Selecting a frame}.
+
+@kindex info frame
+@kindex info f
+@item info frame
+@itemx info f
+This command prints a verbose description of the selected stack frame,
+including:
+
+@itemize @bullet
+@item 
+the address of the frame 
+@item
+the address of the next frame down (called by this frame)
+@item
+the address of the next frame up (caller of this frame)
+@item
+the language in which the source code corresponding to this frame is written
+@item
+the address of the frame's arguments
+@item
+the program counter saved in it (the address of execution in the caller frame)
+@item
+which registers were saved in the frame
+@end itemize
+
+@noindent The verbose description is useful when
+something has gone wrong that has made the stack format fail to fit
+the usual conventions.
+
+@item info frame @var{addr}
+@itemx info f @var{addr}
+Print a verbose description of the frame at address @var{addr}, without
+selecting that frame.  The selected frame remains unchanged by this
+command.  This requires the same kind of address (more than one for some
+architectures) that you specify in the @code{frame} command.
+@xref{Selection, ,Selecting a frame}.
+
+@kindex info args
+@item info args
+Print the arguments of the selected frame, each on a separate line.
+
+@item info locals
+@kindex info locals
+Print the local variables of the selected frame, each on a separate
+line.  These are all variables (declared either static or automatic)
+accessible at the point of execution of the selected frame.
+
+@ifclear CONLY
+@ifclear HPPA
+@kindex info catch
+@cindex catch exceptions
+@cindex exception handlers
+@item info catch
+Print a list of all the exception handlers that are active in the
+current stack frame at the current point of execution.  To see other
+exception handlers, visit the associated frame (using the @code{up},
+@code{down}, or @code{frame} commands); then type @code{info catch}.
+@xref{Set Catchpoints, , Setting catchpoints}.
+@end ifclear
+@end ifclear
+@end table
+
+@node Alpha/MIPS Stack,  , Frame Info, Stack
+@section MIPS/Alpha machines and the function stack
+
+@cindex stack on Alpha
+@cindex stack on MIPS
+@cindex Alpha stack
+@cindex MIPS stack
+Alpha- and MIPS-based computers use an unusual stack frame, which
+sometimes requires @value{GDBN} to search backward in the object code to
+find the beginning of a function.
+
+@cindex response time, MIPS debugging
+To improve response time (especially for embedded applications, where
+@value{GDBN} may be restricted to a slow serial line for this search)
+you may want to limit the size of this search, using one of these
+commands:
+
+@table @code
+@cindex @code{heuristic-fence-post} (Alpha,MIPS)
+@item set heuristic-fence-post @var{limit}
+Restrict @value{GDBN} to examining at most @var{limit} bytes in its search
+for the beginning of a function.  A value of @var{0} (the default)
+means there is no limit.  However, except for @var{0}, the larger the
+limit the more bytes @code{heuristic-fence-post} must search and 
+therefore the longer it takes to run.
+
+@item show heuristic-fence-post
+Display the current limit.
+@end table
+
+@noindent
+These commands are available @emph{only} when @value{GDBN} is configured
+for debugging programs on Alpha or MIPS processors.
+
+
+@node Source, Data, Stack, Top
+@chapter Examining Source Files
+
+@value{GDBN} can print parts of your program's source, since the debugging
+information recorded in the program tells @value{GDBN} what source files were
+used to build it.  When your program stops, @value{GDBN} spontaneously prints
+the line where it stopped.  Likewise, when you select a stack frame
+(@pxref{Selection, ,Selecting a frame}), @value{GDBN} prints the line where
+execution in that frame has stopped.  You can print other portions of
+source files by explicit command.
+
+@ifclear DOSHOST
+If you use @value{GDBN} through its @sc{gnu} Emacs interface, you may prefer 
+to use
+Emacs facilities to view source; @pxref{Emacs, ,Using @value{GDBN} under @sc{gnu} Emacs}.
+@end ifclear
+
+@menu
+* List::                        Printing source lines
+@ifclear DOSHOST
+* Search::                      Searching source files
+@end ifclear
+
+* Source Path::                 Specifying source directories
+* Machine Code::                Source and machine code
+@end menu
+
+@node List, Search, Source, Source
+@section Printing source lines
+
+@kindex list
+@kindex l
+To print lines from a source file, use the @code{list} command
+(abbreviated @code{l}).  By default, ten lines are printed.  
+There are several ways to specify what part of the file you want to print.
+
+Here are the forms of the @code{list} command most commonly used:
+
+@table @code
+@item list @var{linenum}
+Print lines centered around line number @var{linenum} in the
+current source file.
+
+@item list @var{function}
+Print lines centered around the beginning of function
+@var{function}.
+
+@item list
+Print more lines.  If the last lines printed were printed with a
+@code{list} command, this prints lines following the last lines
+printed; however, if the last line printed was a solitary line printed
+as part of displaying a stack frame (@pxref{Stack, ,Examining the
+Stack}), this prints lines centered around that line.
+
+@item list -
+Print lines just before the lines last printed.
+@end table
+
+By default, @value{GDBN} prints ten source lines with any of these forms of
+the @code{list} command.  You can change this using @code{set listsize}:
+
+@table @code
+@kindex set listsize
+@item set listsize @var{count}
+Make the @code{list} command display @var{count} source lines (unless
+the @code{list} argument explicitly specifies some other number).
+
+@kindex show listsize
+@item show listsize
+Display the number of lines that @code{list} prints.
+@end table
+
+Repeating a @code{list} command with @key{RET} discards the argument,
+so it is equivalent to typing just @code{list}.  This is more useful
+than listing the same lines again.  An exception is made for an
+argument of @samp{-}; that argument is preserved in repetition so that
+each repetition moves up in the source file.
+
+@cindex linespec
+In general, the @code{list} command expects you to supply zero, one or two
+@dfn{linespecs}.  Linespecs specify source lines; there are several ways
+of writing them but the effect is always to specify some source line.
+Here is a complete description of the possible arguments for @code{list}:
+
+@table @code
+@item list @var{linespec}
+Print lines centered around the line specified by @var{linespec}.
+
+@item list @var{first},@var{last}
+Print lines from @var{first} to @var{last}.  Both arguments are
+linespecs.
+
+@item list ,@var{last}
+Print lines ending with @var{last}.
+
+@item list @var{first},
+Print lines starting with @var{first}.
+
+@item list +
+Print lines just after the lines last printed.
+
+@item list -
+Print lines just before the lines last printed.
+
+@item list
+As described in the preceding table.
+@end table
+
+Here are the ways of specifying a single source line---all the
+kinds of linespec.
+
+@table @code
+@item @var{number}
+Specifies line @var{number} of the current source file.
+When a @code{list} command has two linespecs, this refers to
+the same source file as the first linespec.
+
+@item +@var{offset}
+Specifies the line @var{offset} lines after the last line printed.
+When used as the second linespec in a @code{list} command that has
+two, this specifies the line @var{offset} lines down from the
+first linespec.
+
+@item -@var{offset}
+Specifies the line @var{offset} lines before the last line printed.
+
+@item @var{filename}:@var{number}
+Specifies line @var{number} in the source file @var{filename}.
+
+@item @var{function}
+Specifies the line that begins the body of the function @var{function}.
+For example: in C, this is the line with the open brace.
+
+@item @var{filename}:@var{function}
+Specifies the line of the open-brace that begins the body of the
+function @var{function} in the file @var{filename}.  You only need the
+file name with a function name to avoid ambiguity when there are
+identically named functions in different source files.
+
+@item *@var{address}
+Specifies the line containing the program address @var{address}.
+@var{address} may be any expression.
+@end table
+
+@ifclear DOSHOST
+@node Search, Source Path, List, Source
+@section Searching source files
+@cindex searching
+@kindex reverse-search
+
+There are two commands for searching through the current source file for a
+regular expression.
+
+@table @code
+@kindex search
+@kindex forward-search
+@item forward-search @var{regexp}
+@itemx search @var{regexp}
+The command @samp{forward-search @var{regexp}} checks each line,
+starting with the one following the last line listed, for a match for
+@var{regexp}.  It lists the line that is found.  You can use the 
+synonym @samp{search @var{regexp}} or abbreviate the command name as
+@code{fo}.
+
+@item reverse-search @var{regexp}
+The command @samp{reverse-search @var{regexp}} checks each line, starting
+with the one before the last line listed and going backward, for a match
+for @var{regexp}.  It lists the line that is found.  You can abbreviate
+this command as @code{rev}.
+@end table
+@end ifclear
+
+@node Source Path, Machine Code, Search, Source
+@section Specifying source directories
+
+@cindex source path
+@cindex directories for source files
+Executable programs sometimes do not record the directories of the source
+files from which they were compiled, just the names.  Even when they do,
+the directories could be moved between the compilation and your debugging
+session.  @value{GDBN} has a list of directories to search for source files;
+this is called the @dfn{source path}.  Each time @value{GDBN} wants a source file,
+it tries all the directories in the list, in the order they are present
+in the list, until it finds a file with the desired name.  Note that
+the executable search path is @emph{not} used for this purpose.  Neither is
+the current working directory, unless it happens to be in the source
+path.
+
+If @value{GDBN} cannot find a source file in the source path, and the
+object program records a directory, @value{GDBN} tries that directory
+too.  If the source path is empty, and there is no record of the
+compilation directory, @value{GDBN} looks in the current directory as a
+last resort.
+
+Whenever you reset or rearrange the source path, @value{GDBN} clears out
+any information it has cached about where source files are found and where
+each line is in the file.
+
+@kindex directory
+@kindex dir
+When you start @value{GDBN}, its source path is empty.
+To add other directories, use the @code{directory} command.
+
+@table @code
+@item directory @var{dirname} @dots{}
+@item dir @var{dirname} @dots{}
+Add directory @var{dirname} to the front of the source path.  Several
+directory names may be given to this command, separated by @samp{:} or
+whitespace.  You may specify a directory that is already in the source
+path; this moves it forward, so @value{GDBN} searches it sooner.
+
+@kindex cdir
+@kindex cwd
+@kindex $cdir
+@kindex $cwd
+@cindex compilation directory
+@cindex current directory
+@cindex working directory
+@cindex directory, current
+@cindex directory, compilation
+You can use the string @samp{$cdir} to refer to the compilation
+directory (if one is recorded), and @samp{$cwd} to refer to the current
+working directory.  @samp{$cwd} is not the same as @samp{.}---the former
+tracks the current working directory as it changes during your @value{GDBN}
+session, while the latter is immediately expanded to the current
+directory at the time you add an entry to the source path.
+
+@item directory
+Reset the source path to empty again.  This requires confirmation.
+
+@c RET-repeat for @code{directory} is explicitly disabled, but since
+@c repeating it would be a no-op we do not say that.  (thanks to RMS)
+
+@item show directories
+@kindex show directories
+Print the source path: show which directories it contains.
+@end table
+
+If your source path is cluttered with directories that are no longer of
+interest, @value{GDBN} may sometimes cause confusion by finding the wrong
+versions of source.  You can correct the situation as follows:
+
+@enumerate
+@item
+Use @code{directory} with no argument to reset the source path to empty.
+
+@item
+Use @code{directory} with suitable arguments to reinstall the
+directories you want in the source path.  You can add all the
+directories in one command.
+@end enumerate
+
+@node Machine Code,  , Source Path, Source
+@section Source and machine code
+
+You can use the command @code{info line} to map source lines to program
+addresses (and vice versa), and the command @code{disassemble} to display
+a range of addresses as machine instructions.  When run under @sc{gnu} Emacs
+mode, the @code{info line} command now causes the arrow to point to the
+line specified.  Also, @code{info line} prints addresses in symbolic form as 
+well as hex.
+
+@table @code
+@kindex info line
+@item info line @var{linespec}
+Print the starting and ending addresses of the compiled code for
+source line @var{linespec}.  You can specify source lines in any of
+the ways understood by the @code{list} command (@pxref{List, ,Printing
+source lines}).
+@end table
+
+For example, we can use @code{info line} to discover the location of
+the object code for the first line of function
+@code{m4_changequote}:
+
+@smallexample
+(@value{GDBP}) info line m4_changecom
+Line 895 of "builtin.c" starts at pc 0x634c and ends at 0x6350.
+@end smallexample
+
+@noindent
+We can also inquire (using @code{*@var{addr}} as the form for
+@var{linespec}) what source line covers a particular address:
+@smallexample
+(@value{GDBP}) info line *0x63ff
+Line 926 of "builtin.c" starts at pc 0x63e4 and ends at 0x6404.
+@end smallexample
+
+@cindex @code{$_} and @code{info line}
+After @code{info line}, the default address for the @code{x} command
+is changed to the starting address of the line, so that @samp{x/i} is
+sufficient to begin examining the machine code (@pxref{Memory,
+,Examining memory}).  Also, this address is saved as the value of the
+convenience variable @code{$_} (@pxref{Convenience Vars, ,Convenience
+variables}).
+
+@table @code
+@kindex disassemble
+@cindex assembly instructions
+@cindex instructions, assembly
+@cindex machine instructions
+@cindex listing machine instructions
+@item disassemble
+This specialized command dumps a range of memory as machine
+instructions.  The default memory range is the function surrounding the
+program counter of the selected frame.  A single argument to this
+command is a program counter value; @value{GDBN} dumps the function
+surrounding this value.  Two arguments specify a range of addresses
+(first inclusive, second exclusive) to dump.
+@end table
+
+@ifclear H8EXCLUSIVE
+The following example shows the disassembly of a range of addresses of
+HP PA-RISC 2.0 code:
+
+@smallexample
+(@value{GDBP}) disas 0x32c4 0x32e4
+Dump of assembler code from 0x32c4 to 0x32e4:
+0x32c4 <main+204>:      addil 0,dp
+0x32c8 <main+208>:      ldw 0x22c(sr0,r1),r26
+0x32cc <main+212>:      ldil 0x3000,r31
+0x32d0 <main+216>:      ble 0x3f8(sr4,r31)
+0x32d4 <main+220>:      ldo 0(r31),rp
+0x32d8 <main+224>:      addil -0x800,dp
+0x32dc <main+228>:      ldo 0x588(r1),r26
+0x32e0 <main+232>:      ldil 0x3000,r31
+End of assembler dump.
+@end smallexample
+@end ifclear
+
+@ifset H8EXCLUSIVE
+For example, here is the beginning of the output for the
+disassembly of a function @code{fact}:
+
+
+@smallexample
+(@value{GDBP}) disas fact
+Dump of assembler code for function fact:
+to 0x808c:
+0x802c <fact>: 6d f2		mov.w r2,@@-r7
+0x802e <fact+2>:  6d f3		mov.w r3,@@-r7
+0x8030 <fact+4>:  6d f6		mov.w r6,@@-r7
+0x8032 <fact+6>:  0d 76		mov.w r7,r6
+0x8034 <fact+8>:  6f 70 00 08	mov.w @@(0x8,r7),r0
+0x8038 <fact+12>  19 11		sub.w	r1,r1
+ .
+ .
+ . 
+@end smallexample
+@end ifset
+
+Some architectures have more than one commonly-used set of instruction
+mnemonics or other syntax.
+
+@table @code
+@kindex set assembly-language
+@cindex assembly instructions
+@cindex instructions, assembly
+@cindex machine instructions
+@cindex listing machine instructions
+@item set assembly-language @var{instruction-set}
+Select the instruction set to use when disassembling the
+program via the @code{disassemble} or @code{x/i} commands.
+
+Currently this command is only defined for the Intel x86 family.  You
+can set @var{instruction-set} to either @code{i386} or @code{i8086}.
+The default is @code{i386}.
+@end table
+
+
+@node Data, Languages, Source, Top
+@chapter Examining Data
+
+@cindex printing data
+@cindex examining data
+@kindex print
+@kindex inspect
+@c "inspect" is not quite a synonym if you are using Epoch, which we do not
+@c document because it is nonstandard...  Under Epoch it displays in a
+@c different window or something like that.
+The usual way to examine data in your program is with the @code{print}
+command (abbreviated @code{p}), or its synonym @code{inspect}.  
+@ifclear CONLY
+It evaluates and prints the value of an expression of the language your
+program is written in (@pxref{Languages, ,Using @value{GDBN} with Different
+Languages}).
+@end ifclear
+
+@table @code
+@item print @var{exp}
+@itemx print /@var{f} @var{exp}
+@var{exp} is an expression (in the source language).  By default the
+value of @var{exp} is printed in a format appropriate to its data type;
+you can choose a different format by specifying @samp{/@var{f}}, where
+@var{f} is a letter specifying the format; @pxref{Output Formats,,Output
+formats}.
+
+@item print
+@itemx print /@var{f}
+If you omit @var{exp}, @value{GDBN} displays the last value again (from the
+@dfn{value history}; @pxref{Value History, ,Value history}).  This allows you to
+conveniently inspect the same value in an alternative format.
+@end table
+
+A more low-level way of examining data is with the @code{x} command.
+It examines data in memory at a specified address and prints it in a
+specified format.  @xref{Memory, ,Examining memory}.
+
+If you are interested in information about types, or about how the fields
+of a struct
+@ifclear CONLY
+or class
+@end ifclear
+are declared, use the @code{ptype @var{exp}}
+command rather than @code{print}. @xref{Symbols, ,Examining the Symbol Table}.
+
+@menu
+* Expressions::                 Expressions
+* Variables::                   Program variables
+* Arrays::                      Artificial arrays
+* Output Formats::              Output formats
+* Memory::                      Examining memory
+* Auto Display::                Automatic display
+* Print Settings::              Print settings
+* Value History::               Value history
+* Convenience Vars::            Convenience variables
+* Registers::                   Registers
+@ifclear HAVE-FLOAT
+* Floating Point Hardware::     Floating point hardware
+@end ifclear
+
+@end menu
+
+@node Expressions, Variables, Data, Data
+@section Expressions
+
+@cindex expressions
+@code{print} and many other @value{GDBN} commands accept an expression and
+compute its value.  Any kind of constant, variable or operator defined
+by the programming language you are using is valid in an expression in
+@value{GDBN}.  This includes conditional expressions, function calls, casts
+and string constants.  It unfortunately does not include symbols defined
+by preprocessor @code{#define} commands.
+
+@value{GDBN} now supports array constants in expressions input by
+the user.  The syntax is @var{@{element, element@dots{}@}}.  For example,
+you can now use the command @code{print @{1, 2, 3@}} to build up an array in 
+memory that is malloc'd in the target program.
+
+@ifclear CONLY
+Because C is so widespread, most of the expressions shown in examples in
+this manual are in C.  @xref{Languages, , Using @value{GDBN} with Different
+Languages}, for information on how to use expressions in other
+languages.
+
+In this section, we discuss operators that you can use in @value{GDBN}
+expressions regardless of your programming language.
+
+Casts are supported in all languages, not just in C, because it is so
+useful to cast a number into a pointer in order to examine a structure
+at that address in memory.
+@c FIXME: casts supported---Mod2 true?
+@end ifclear
+
+@value{GDBN} supports these operators, in addition to those common
+to programming languages:
+
+@table @code
+@item @@
+@samp{@@} is a binary operator for treating parts of memory as arrays.
+@xref{Arrays, ,Artificial arrays}, for more information.
+
+@item ::
+@samp{::} allows you to specify a variable in terms of the file or
+function where it is defined.  @xref{Variables, ,Program variables}.
+
+@cindex @{@var{type}@}
+@cindex type casting memory
+@cindex memory, viewing as typed object
+@cindex casts, to view memory
+@item @{@var{type}@} @var{addr}
+Refers to an object of type @var{type} stored at address @var{addr} in
+memory.  @var{addr} may be any expression whose value is an integer or
+pointer (but parentheses are required around binary operators, just as in
+a cast).  This construct is allowed regardless of what kind of data is
+normally supposed to reside at @var{addr}.
+@end table
+
+@node Variables, Arrays, Expressions, Data
+@section Program variables
+
+The most common kind of expression to use is the name of a variable
+in your program.
+
+Variables in expressions are understood in the selected stack frame
+(@pxref{Selection, ,Selecting a frame}); they must be either:
+
+@itemize @bullet
+@item
+global (or file-static)
+@end itemize
+
+@noindent or 
+
+@itemize @bullet
+@item
+visible according to the scope rules of the
+programming language from the point of execution in that frame
+@end itemize  
+
+@noindent This means that in the function
+
+@example
+foo (a)
+     int a;
+@{
+  bar (a);
+  @{
+    int b = test ();
+    bar (b);
+  @}
+@}
+@end example
+
+@noindent
+you can examine and use the variable @code{a} whenever your program is
+executing within the function @code{foo}, but you can only use or
+examine the variable @code{b} while your program is executing inside
+the block where @code{b} is declared.
+
+@cindex variable name conflict
+There is an exception: you can refer to a variable or function whose
+scope is a single source file even if the current execution point is not
+in this file.  But it is possible to have more than one such variable or
+function with the same name (in different source files).  If that
+happens, referring to that name has unpredictable effects.  If you wish,
+you can specify a static variable in a particular function or file,
+using the colon-colon notation:
+
+@cindex colon-colon
+@iftex
+@c info cannot cope with a :: index entry, but why deprive hard copy readers?
+@kindex ::
+@end iftex
+@example
+@var{file}::@var{variable}
+@var{function}::@var{variable}
+@end example
+
+@noindent
+Here @var{file} or @var{function} is the name of the context for the
+static @var{variable}.  In the case of file names, you can use quotes to
+make sure @value{GDBN} parses the file name as a single word---for example,
+to print a global value of @code{x} defined in @file{f2.c}:
+
+@example
+(@value{GDBP}) p 'f2.c'::x
+@end example
+
+@ifclear CONLY
+@cindex C++ scope resolution
+This use of @samp{::} is very rarely in conflict with the very similar
+use of the same notation in C++.  @value{GDBN} also supports use of the C++
+scope resolution operator in @value{GDBN} expressions.
+@c FIXME: Um, so what happens in one of those rare cases where it's in
+@c conflict??  --mew
+@end ifclear
+
+@cindex wrong values
+@cindex variable values, wrong
+@quotation
+@emph{Warning:} Occasionally, a local variable may appear to have the
+wrong value at certain points in a function---just after entry to a new
+scope, and just before exit.
+@end quotation
+You may see this problem when you are stepping by machine instructions.
+This is because, on most machines, it takes more than one instruction to
+set up a stack frame (including local variable definitions); if you are
+stepping by machine instructions, variables may appear to have the wrong
+values until the stack frame is completely built.  On exit, it usually
+also takes more than one machine instruction to destroy a stack frame;
+after you begin stepping through that group of instructions, local
+variable definitions may be gone.
+
+This may also happen when the compiler does significant optimizations.
+To be sure of always seeing accurate values, turn off all optimization
+when compiling.
+
+@node Arrays, Output Formats, Variables, Data
+@section Artificial arrays
+
+@cindex artificial array
+@kindex @@
+It is often useful to print out several successive objects of the
+same type in memory; a section of an array, or an array of
+dynamically determined size for which only a pointer exists in the
+program.
+
+You can do this by referring to a contiguous span of memory as an
+@dfn{artificial array}, using the binary operator @samp{@@}.  The left
+operand of @samp{@@} should be the first element of the desired array
+and be an individual object.  The right operand should be the desired length
+of the array.  The result is an array value whose elements are all of
+the type of the left argument.  The first element is actually the left
+argument; the second element comes from bytes of memory immediately
+following those that hold the first element, and so on.  Here is an
+example.  If a program says
+
+@example
+int *array = (int *) malloc (len * sizeof (int));
+@end example
+
+@noindent
+you can print the contents of @code{array} with
+
+@example
+p *array@@len
+@end example
+
+The left operand of @samp{@@} must reside in memory.  Array values made
+with @samp{@@} in this way behave just like other arrays in terms of
+subscripting, and are coerced to pointers when used in expressions.
+Artificial arrays most often appear in expressions via the value history
+(@pxref{Value History, ,Value history}), after printing one out.
+
+Another way to create an artificial array is to use a cast.
+This re-interprets a value as if it were an array.
+The value need not be in memory:
+@example
+(@value{GDBP}) p/x (short[2])0x12345678
+$1 = @{0x1234, 0x5678@}
+@end example
+
+As a convenience, if you leave the array length out (as in
+@samp{(@var{type})[])@var{value}}) gdb calculates the size to fill
+the value (as @samp{sizeof(@var{value})/sizeof(@var{type})}:
+@example
+(@value{GDBP}) p/x (short[])0x12345678
+$2 = @{0x1234, 0x5678@}
+@end example
+
+Sometimes the artificial array mechanism is not quite enough; in
+moderately complex data structures, the elements of interest may not
+actually be adjacent---for example, if you are interested in the values
+of pointers in an array.  One useful work-around in this situation is
+to use a convenience variable (@pxref{Convenience Vars, ,Convenience
+variables}) as a counter in an expression that prints the first
+interesting value, and then repeat that expression via @key{RET}.  For
+instance, suppose you have an array @code{dtab} of pointers to
+structures, and you are interested in the values of a field @code{fv}
+in each structure.  Here is an example of what you might type:
+
+@example
+set $i = 0
+p dtab[$i++]->fv
+@key{RET}
+@key{RET}
+@dots{}
+@end example
+
+@node Output Formats, Memory, Arrays, Data
+@section Output formats
+
+@cindex formatted output
+@cindex output formats
+By default, @value{GDBN} prints a value according to its data type.  Sometimes
+this is not what you want.  For example, you might want to print a number
+in hex, or a pointer in decimal.  Or you might want to view data in memory
+at a certain address as a character string or as an instruction.  To do
+these things, specify an @dfn{output format} when you print a value.
+
+The simplest use of output formats is to say how to print a value
+already computed.  This is done by starting the arguments of the
+@code{print} command with a slash and a format letter.  The format
+letters supported are:
+
+@table @code
+@item x
+Regard the bits of the value as an integer, and print the integer in
+hexadecimal.
+
+@item d
+Print as integer in signed decimal.
+
+@item u
+Print as integer in unsigned decimal.
+
+@item o
+Print as integer in octal.
+
+@item t
+Print as integer in binary.  The letter @samp{t} stands for ``two''.
+@footnote{@samp{b} cannot be used because these format letters are also
+used with the @code{x} command, where @samp{b} stands for ``byte'';
+@pxref{Memory,,Examining memory}.}
+
+@item a
+@cindex unknown address, locating
+Print as an address, both absolute in hexadecimal and as an offset from
+the nearest preceding symbol.  You can use this format used to discover
+where (in what function) an unknown address is located:
+
+@example
+(@value{GDBP}) p/a 0x54320
+$3 = 0x54320 <_initialize_vx+396>
+@end example
+
+@item c
+Regard as an integer and print it as a character constant.
+
+@item f
+Regard the bits of the value as a floating point number and print
+using typical floating point syntax.
+@end table
+
+For example, to print the program counter in hex (@pxref{Registers}), type
+
+@example
+p/x $pc
+@end example
+
+@noindent
+Note that no space is required before the slash; this is because command
+names in @value{GDBN} cannot contain a slash.
+
+To reprint the last value in the value history with a different format,
+you can use the @code{print} command with just a format and no
+expression.  For example, @samp{p/x} reprints the last value in hex.
+
+@node Memory, Auto Display, Output Formats, Data
+@section Examining memory
+
+You can use the command @code{x} (for ``examine'') to examine memory in
+any of several formats, independently of your program's data types.
+
+@cindex examining memory
+@table @code
+@kindex x
+@item x/@var{nfu} @var{addr}
+@itemx x @var{addr}
+@itemx x
+Use the @code{x} command to examine memory.
+@end table
+
+@var{n}, @var{f}, and @var{u} are all optional parameters that specify how
+much memory to display and how to format it; @var{addr} is an
+expression giving the address where you want to start displaying memory.
+If you use defaults for @var{nfu}, you need not type the slash @samp{/}.
+Several commands set convenient defaults for @var{addr}.
+
+@table @r
+@item @var{n}, the repeat count
+The repeat count is a decimal integer; the default is 1.  It specifies
+how much memory (counting by units @var{u}) to display.
+@c This really is **decimal**; unaffected by 'set radix' as of GDB
+@c 4.1.2.
+
+@item @var{f}, the display format
+The display format is one of the formats used by @code{print},
+@samp{s} (null-terminated string), or @samp{i} (machine instruction).
+The default is @samp{x} (hexadecimal) initially.
+The default changes each time you use either @code{x} or @code{print}.
+
+@item @var{u}, the unit size
+The unit size is any of
+
+@table @code
+@item b
+Bytes.
+@item h
+Halfwords (two bytes).
+@item w
+Words (four bytes).  This is the initial default.
+@item g
+Giant words (eight bytes).
+@end table
+
+Each time you specify a unit size with @code{x}, that size becomes the
+default unit the next time you use @code{x}.  (For the @samp{s} and
+@samp{i} formats, the unit size is ignored and is normally not written.)
+
+@item @var{addr}, starting display address
+@var{addr} is the address where you want @value{GDBN} to begin displaying
+memory.  The expression need not have a pointer value (though it may);
+it is always interpreted as an integer address of a byte of memory.
+@xref{Expressions, ,Expressions}, for more information on expressions.  The default for
+@var{addr} is usually just after the last address examined---but several
+other commands also set the default address: @code{info breakpoints} (to
+the address of the last breakpoint listed), @code{info line} (to the
+starting address of a line), and @code{print} (if you use it to display
+a value from memory).
+@end table
+
+For example, @samp{x/3uh 0x54320} is a request to display three halfwords
+(@code{h}) of memory, formatted as unsigned decimal integers (@samp{u}),
+starting at address @code{0x54320}.  @samp{x/4xw $sp} prints the four
+words (@samp{w}) of memory above the stack pointer (here, @samp{$sp};
+@pxref{Registers}) in hexadecimal (@samp{x}).
+
+Since the letters indicating unit sizes are all distinct from the
+letters specifying output formats, you do not have to remember whether
+unit size or format comes first; either order works.  The output
+specifications @samp{4xw} and @samp{4wx} mean exactly the same thing.
+(However, the count @var{n} must come first; @samp{wx4} does not work.)
+
+Even though the unit size @var{u} is ignored for the formats @samp{s}
+and @samp{i}, you might still want to use a count @var{n}; for example,
+@samp{3i} specifies that you want to see three machine instructions,
+including any operands.  The command @code{disassemble} gives an
+alternative way of inspecting machine instructions; @pxref{Machine
+Code,,Source and machine code}.
+
+All the defaults for the arguments to @code{x} are designed to make it
+easy to continue scanning memory with minimal specifications each time
+you use @code{x}.  For example, after you have inspected three machine
+instructions with @samp{x/3i @var{addr}}, you can inspect the next seven
+with just @samp{x/7}.  If you use @key{RET} to repeat the @code{x} command,
+the repeat count @var{n} is used again; the other arguments default as
+for successive uses of @code{x}.
+
+@cindex @code{$_}, @code{$__}, and value history
+The addresses and contents printed by the @code{x} command are not saved
+in the value history because there is often too much of them and they
+would get in the way.  Instead, @value{GDBN} makes these values available for
+subsequent use in expressions as values of the convenience variables
+@code{$_} and @code{$__}.  After an @code{x} command, the last address
+examined is available for use in expressions in the convenience variable
+@code{$_}.  The contents of that address, as examined, are available in
+the convenience variable @code{$__}.
+
+If the @code{x} command has a repeat count, the address and contents saved
+are from the last memory unit printed; this is not the same as the last
+address printed if several units were printed on the last line of output.
+
+@node Auto Display, Print Settings, Memory, Data
+@section Automatic display
+@cindex automatic display
+@cindex display of expressions
+
+If you find that you want to print the value of an expression frequently
+(to see how it changes), you might want to add it to the @dfn{automatic
+display list} so that @value{GDBN} prints its value each time your program stops.
+Each expression added to the list is given a number to identify it;
+to remove an expression from the list, you specify that number.
+The automatic display looks like this:
+
+@example
+2: foo = 38
+3: bar[5] = (struct hack *) 0x3804
+@end example
+
+@noindent
+This display shows item numbers, expressions and their current values.  As with
+displays you request manually using @code{x} or @code{print}, you can
+specify the output format you prefer; in fact, @code{display} decides
+whether to use @code{print} or @code{x} depending on how elaborate your
+format specification is---it uses @code{x} if you specify a unit size,
+or one of the two formats (@samp{i} and @samp{s}) that are only
+supported by @code{x}; otherwise it uses @code{print}.
+
+@table @code
+@kindex display
+@item display @var{exp}
+Add the expression @var{exp} to the list of expressions to display
+each time your program stops.  @xref{Expressions, ,Expressions}.
+
+@code{display} does not repeat if you press @key{RET} again after using it.
+
+@item display/@var{fmt} @var{exp}
+For @var{fmt} specifying only a display format and not a size or
+count, add the expression @var{exp} to the auto-display list but
+arrange to display it each time in the specified format @var{fmt}.
+@xref{Output Formats,,Output formats}.
+
+@item display/@var{fmt} @var{addr}
+For @var{fmt} @samp{i} or @samp{s}, or including a unit-size or a
+number of units, add the expression @var{addr} as a memory address to
+be examined each time your program stops.  Examining means in effect
+doing @samp{x/@var{fmt} @var{addr}}.  @xref{Memory, ,Examining memory}.
+@end table
+
+For example, @samp{display/i $pc} can be helpful, to see the machine
+instruction about to be executed each time execution stops (@samp{$pc}
+is a common name for the program counter; @pxref{Registers}).
+
+@table @code
+@kindex delete display
+@kindex undisplay
+@item undisplay @var{dnums}@dots{}
+@itemx delete display @var{dnums}@dots{}
+Remove item numbers @var{dnums} from the list of expressions to display.
+
+@code{undisplay} does not repeat if you press @key{RET} after using it.
+(Otherwise you would just get the error @samp{No display number @dots{}}.)
+
+@kindex disable display
+@item disable display @var{dnums}@dots{}
+Disable the display of item numbers @var{dnums}.  A disabled display
+item is not printed automatically, but is not forgotten.  It may be
+enabled again later.
+
+@kindex enable display
+@item enable display @var{dnums}@dots{}
+Enable display of item numbers @var{dnums}.  It becomes effective once
+again in auto display of its expression, until you specify otherwise.
+
+@item display
+Display the current values of the expressions on the list, just as is
+done when your program stops.
+
+@kindex info display
+@item info display
+Print the list of expressions previously set up to display
+automatically, each one with its item number, but without showing the
+values.  This includes disabled expressions, which are marked as such.
+It also includes expressions which would not be displayed right now
+because they refer to automatic variables not currently available.
+@end table
+
+If a display expression refers to local variables, then it does not make
+sense outside the lexical context for which it was set up.  Such an
+expression is disabled when execution enters a context where one of its
+variables is not defined.  For example, if you give the command
+@code{display last_char} while inside a function with an argument
+@code{last_char}, @value{GDBN} displays this argument while your program
+continues to stop inside that function.  When it stops elsewhere---where
+there is no variable @code{last_char}---the display is disabled
+automatically.  The next time your program stops where @code{last_char}
+is meaningful, you can enable the display expression once again.
+
+@node Print Settings, Value History, Auto Display, Data
+@section Print settings
+
+@cindex format options
+@cindex print settings
+@value{GDBN} provides the following ways to control how arrays, structures,
+and symbols are printed.
+
+@noindent
+These settings are useful for debugging programs in any language:
+
+@table @code
+@kindex set print address
+@item set print address
+@itemx set print address on
+@value{GDBN} prints memory addresses showing the location of stack
+traces, structure values, pointer values, breakpoints, and so forth,
+even when it also displays the contents of those addresses.  The default
+is @code{on}.  For example, this is what a stack frame display looks like with
+@code{set print address on}:
+
+@smallexample
+@group
+(@value{GDBP}) f
+#0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>")
+    at input.c:530
+530         if (lquote != def_lquote)
+@end group
+@end smallexample
+
+@item set print address off
+Do not print addresses when displaying their contents.  For example,
+this is the same stack frame displayed with @code{set print address off}:
+
+@smallexample
+@group
+(@value{GDBP}) set print addr off
+(@value{GDBP}) f
+#0  set_quotes (lq="<<", rq=">>") at input.c:530
+530         if (lquote != def_lquote)
+@end group
+@end smallexample
+
+You can use @samp{set print address off} to eliminate all machine
+dependent displays from the @value{GDBN} interface.  For example, with
+@code{print address off}, you should get the same text for backtraces on
+all machines---whether or not they involve pointer arguments.
+
+@kindex show print address
+@item show print address
+Show whether or not addresses are to be printed.
+@end table
+
+When @value{GDBN} prints a symbolic address, it normally prints the
+closest earlier symbol plus an offset.  If that symbol does not uniquely
+identify the address (for example, it is a name whose scope is a single
+source file), you may need to clarify.  One way to do this is with
+@code{info line}, for example @samp{info line *0x4537}.  Alternately,
+you can set @value{GDBN} to print the source file and line number when
+it prints a symbolic address:
+
+@table @code
+@kindex set print symbol-filename
+@item set print symbol-filename on
+Tell @value{GDBN} to print the source file name and line number of a
+symbol in the symbolic form of an address.
+
+@item set print symbol-filename off
+Do not print source file name and line number of a symbol.  This is the
+default.
+
+@kindex show print symbol-filename
+@item show print symbol-filename
+Show whether or not @value{GDBN} will print the source file name and
+line number of a symbol in the symbolic form of an address.
+@end table
+
+Another situation where it is helpful to show symbol filenames and line
+numbers is when disassembling code; @value{GDBN} shows you the line
+number and source file that corresponds to each instruction.
+
+Also, you may wish to see the symbolic form only if the address being
+printed is reasonably close to the closest earlier symbol:
+
+@table @code
+@kindex set print max-symbolic-offset
+@item set print max-symbolic-offset @var{max-offset}
+Tell @value{GDBN} to only display the symbolic form of an address if the
+offset between the closest earlier symbol and the address is less than
+@var{max-offset}.  The default is 0, which tells @value{GDBN} 
+to always print the symbolic form of an address if any symbol precedes it.
+
+@kindex show print max-symbolic-offset
+@item show print max-symbolic-offset
+Ask how large the maximum offset is that @value{GDBN} prints in a
+symbolic address.
+@end table
+
+@cindex wild pointer, interpreting
+@cindex pointer, finding referent
+If you have a pointer and you are not sure where it points, try
+@samp{set print symbol-filename on}.  Then you can determine the name
+and source file location of the variable where it points, using
+@samp{p/a @var{pointer}}.  This interprets the address in symbolic form.
+For example, here @value{GDBN} shows that a variable @code{ptt} points
+at another variable @code{t}, defined in @file{hi2.c}:
+
+@example
+(@value{GDBP}) set print symbol-filename on
+(@value{GDBP}) p/a ptt
+$4 = 0xe008 <t in hi2.c>
+@end example
+
+@quotation
+@emph{Warning:} For pointers that point to a local variable, @samp{p/a}
+does not show the symbol name and filename of the referent, even with
+the appropriate @code{set print} options turned on.
+@end quotation
+
+Other settings control how different kinds of objects are printed:
+
+@table @code
+@kindex set print array
+@item set print array
+@itemx set print array on
+Pretty print arrays.  This format is more convenient to read,
+but uses more space.  The default is off.
+
+@item set print array off
+Return to compressed format for arrays.
+
+@kindex show print array
+@item show print array
+Show whether compressed or pretty format is selected for displaying
+arrays.
+
+@kindex set print elements
+@item set print elements @var{number-of-elements}
+Set a limit on how many elements of an array @value{GDBN} will print.
+If @value{GDBN} is printing a large array, it stops printing after it has
+printed the number of elements set by the @code{set print elements} command.
+This limit also applies to the display of strings.
+Setting  @var{number-of-elements} to zero means that the printing is unlimited.
+
+@kindex show print elements
+@item show print elements
+Display the number of elements of a large array that @value{GDBN} will print.
+If the number is 0, then the printing is unlimited.
+
+@kindex set print null-stop
+@item set print null-stop
+Cause @value{GDBN} to stop printing the characters of an array when the first
+@sc{NULL} is encountered.  This is useful when large arrays actually
+contain only short strings.
+
+@kindex set print pretty
+@item set print pretty on
+Cause @value{GDBN} to print structures in an indented format with one member 
+per line, like this:
+
+@smallexample
+@group
+$1 = @{
+  next = 0x0,
+  flags = @{
+    sweet = 1,
+    sour = 1
+  @},
+  meat = 0x54 "Pork"
+@}
+@end group
+@end smallexample
+
+@item set print pretty off
+Cause @value{GDBN} to print structures in a compact format, like this:
+
+@smallexample
+@group
+$1 = @{next = 0x0, flags = @{sweet = 1, sour = 1@}, \
+meat = 0x54 "Pork"@}
+@end group
+@end smallexample
+
+@noindent
+This is the default format.
+
+@kindex show print pretty
+@item show print pretty
+Show which format @value{GDBN} is using to print structures.
+
+@kindex set print sevenbit-strings
+@item set print sevenbit-strings on
+Print using only seven-bit characters; if this option is set,
+@value{GDBN} displays any eight-bit characters (in strings or
+character values) using the notation @code{\}@var{nnn}.  This setting is
+best if you are working in English (@sc{ascii}) and you use the
+high-order bit of characters as a marker or ``meta'' bit.
+
+@item set print sevenbit-strings off
+Print full eight-bit characters.  This allows the use of more
+international character sets, and is the default.
+
+@kindex show print sevenbit-strings
+@item show print sevenbit-strings
+Show whether or not @value{GDBN} is printing only seven-bit characters.
+
+@kindex set print union
+@item set print union on
+Tell @value{GDBN} to print unions which are contained in structures.  This 
+is the default setting.
+
+@item set print union off
+Tell @value{GDBN} not to print unions which are contained in structures.
+
+@kindex show print union
+@item show print union
+Ask @value{GDBN} whether or not it will print unions which are contained in
+structures.
+
+For example, given the declarations
+
+@smallexample
+typedef enum @{Tree, Bug@} Species;
+typedef enum @{Big_tree, Acorn, Seedling@} Tree_forms;
+typedef enum @{Caterpillar, Cocoon, Butterfly@} 
+              Bug_forms;
+
+struct thing @{
+  Species it;
+  union @{
+    Tree_forms tree;
+    Bug_forms bug;
+  @} form;
+@};
+
+struct thing foo = @{Tree, @{Acorn@}@};
+@end smallexample
+
+@noindent
+with @code{set print union on} in effect @samp{p foo} would print
+
+@smallexample
+$1 = @{it = Tree, form = @{tree = Acorn, bug = Cocoon@}@}
+@end smallexample
+
+@noindent
+and with @code{set print union off} in effect it would print
+
+@smallexample
+$1 = @{it = Tree, form = @{...@}@}
+@end smallexample
+@end table
+
+@ifclear CONLY
+@need 1000
+@noindent
+These settings are of interest when debugging C++ programs:
+
+@table @code
+@cindex demangling
+@kindex set print demangle
+@item set print demangle
+@itemx set print demangle on
+Print C++ names in their source form rather than in the encoded
+(``mangled'') form passed to the assembler and linker for type-safe
+linkage.  The default is @samp{on}.
+
+@kindex show print demangle
+@item show print demangle
+Show whether C++ names are printed in mangled or demangled form.
+
+@kindex set print asm-demangle
+@item set print asm-demangle
+@itemx set print asm-demangle on
+Print C++ names in their source form rather than their mangled form, even
+in assembler code printouts such as instruction disassemblies.
+The default is off.
+
+@kindex show print asm-demangle
+@item show print asm-demangle
+Show whether C++ names in assembly listings are printed in mangled
+or demangled form.
+
+@kindex set demangle-style
+@cindex C++ symbol decoding style
+@cindex symbol decoding style, C++
+@item set demangle-style @var{style}
+Choose among several encoding schemes used by different compilers to
+represent C++ names.  The choices for @var{style} are currently:
+
+@table @code
+@item auto
+Allow @value{GDBN} to choose a decoding style by inspecting your program.
+
+@item gnu
+Decode based on the @sc{gnu} C++ compiler (@code{g++}) encoding algorithm.  
+@ifclear HPPA
+This is the default.
+@end ifclear
+
+@item hp
+Decode based on the HP ANSI C++ (@code{aCC}) encoding algorithm.
+
+@item lucid
+Decode based on the Lucid C++ compiler (@code{lcc}) encoding algorithm.
+
+@item arm
+Decode using the algorithm in the @cite{C++ Annotated Reference Manual}.
+@strong{Warning:} this setting alone is not sufficient to allow
+debugging @code{cfront}-generated executables.  @value{GDBN} would
+require further enhancement to permit that.
+
+@end table
+If you omit @var{style}, you will see a list of possible formats.
+
+@kindex show demangle-style
+@item show demangle-style
+Display the encoding style currently in use for decoding C++ symbols.
+
+@kindex set print object
+@item set print object
+@itemx set print object on
+When displaying a pointer to an object, identify the @emph{actual}
+(derived) type of the object rather than the @emph{declared} type, using
+the virtual function table.
+
+@item set print object off
+Display only the declared type of objects, without reference to the
+virtual function table.  This is the default setting.
+
+@kindex show print object
+@item show print object
+Show whether actual, or declared, object types are displayed.
+
+@kindex set print static-members
+@item set print static-members
+@itemx set print static-members on
+Print static members when displaying a C++ object.  The default is on.
+
+@item set print static-members off
+Do not print static members when displaying a C++ object.
+
+@kindex show print static-members
+@item show print static-members
+Show whether C++ static members are printed, or not.
+
+@c These don't work with HP ANSI C++ yet.
+@kindex set print vtbl
+@item set print vtbl
+@itemx set print vtbl on
+Pretty print C++ virtual function tables.  The default is off.
+@ifset HPPA
+(The @code{vtbl} commands do not work on programs compiled with the HP
+ANSI C++ compiler (@code{aCC}).)
+@end ifset
+
+@item set print vtbl off
+Do not pretty print C++ virtual function tables.
+
+@kindex show print vtbl
+@item show print vtbl
+Show whether C++ virtual function tables are pretty printed, or not.
+@end table
+@end ifclear
+
+@node Value History, Convenience Vars, Print Settings, Data
+@section Value history
+
+@cindex value history
+Values printed by the @code{print} command are saved in the @value{GDBN} 
+@dfn{value history}.  This allows you to refer to them in other expressions.  
+Values are kept until the symbol table is re-read or discarded 
+(for example with the @code{file} or @code{symbol-file} commands).  
+When the symbol table changes, the value history is discarded, 
+since the values may contain pointers back to the types defined in the 
+symbol table.
+
+@cindex @code{$}
+@cindex @code{$$}
+@cindex history number
+The values printed are given @dfn{history numbers} by which you can
+refer to them.  These are successive integers starting with one.
+@code{print} shows you the history number assigned to a value by
+printing @samp{$@var{num} = } before the value; here @var{num} is the
+history number.
+
+To refer to any previous value, use @samp{$} followed by the value's
+history number.  The way @code{print} labels its output is designed to
+remind you of this.  Just @code{$} refers to the most recent value in
+the history, and @code{$$} refers to the value before that.
+@code{$$@var{n}} refers to the @var{n}th value from the end; @code{$$2}
+is the value just prior to @code{$$}, @code{$$1} is equivalent to
+@code{$$}, and @code{$$0} is equivalent to @code{$}.
+
+For example, suppose you have just printed a pointer to a structure and
+want to see the contents of the structure.  It suffices to type
+
+@example
+p *$
+@end example
+
+If you have a chain of structures where the component @code{next} points
+to the next one, you can print the contents of the next one with this:
+
+@example
+p *$.next
+@end example
+
+@noindent
+You can print successive links in the chain by repeating this
+command---which you can do by just typing @key{RET}.
+
+Note that the history records values, not expressions.  If the value of
+@code{x} is 4 and you type these commands:
+
+@example
+print x
+set x=5
+@end example
+
+@noindent
+then the value recorded in the value history by the @code{print} command
+remains 4 even though the value of @code{x} has changed.
+
+@table @code
+@kindex show values
+@item show values
+Print the last ten values in the value history, with their item numbers.
+This is like @samp{p@ $$9} repeated ten times, except that @code{show
+values} does not change the history.
+
+@item show values @var{n}
+Print ten history values centered on history item number @var{n}.
+
+@item show values +
+Print ten history values just after the values last printed.  If no more
+values are available, @code{show values +} produces no display.
+@end table
+
+Pressing @key{RET} to repeat @code{show values @var{n}} has exactly the
+same effect as @samp{show values +}.
+
+@node Convenience Vars, Registers, Value History, Data
+@section Convenience variables
+
+@cindex convenience variables
+@value{GDBN} provides @dfn{convenience variables} that you can use within
+@value{GDBN} to hold on to a value and refer to it later.  These variables
+exist entirely within @value{GDBN}; they are not part of your program, and
+setting a convenience variable has no direct effect on further execution
+of your program.  That is why you can use them freely.
+
+Convenience variables are prefixed with @samp{$}.  Any name preceded by
+@samp{$} can be used for a convenience variable, unless it is one of
+the predefined machine-specific register names (@pxref{Registers}).
+(Value history references, in contrast, are @emph{numbers} preceded
+by @samp{$}.  @xref{Value History, ,Value history}.)
+
+You can save a value in a convenience variable with an assignment
+expression, just as you would set a variable in your program.
+For example:
+
+@example
+set $foo = *object_ptr
+@end example
+
+@noindent
+would save in @code{$foo} the value contained in the object pointed to by
+@code{object_ptr}.
+
+Using a convenience variable for the first time creates it, but its
+value is @code{void} until you assign a new value.  You can alter the
+value with another assignment at any time.
+
+Convenience variables have no fixed types.  You can assign a convenience
+variable any type of value, including structures and arrays, even if
+that variable already has a value of a different type.  The convenience
+variable, when used as an expression, has the type of its current value.
+
+@table @code
+@kindex show convenience
+@item show convenience
+Print a list of convenience variables used so far, and their values.
+Abbreviated @code{show con}.
+@end table
+
+One of the ways to use a convenience variable is as a counter to be
+incremented or a pointer to be advanced.  For example, to print
+a field from successive elements of an array of structures:
+
+@example
+set $i = 0
+print bar[$i++]->contents
+@end example
+
+@noindent Repeat that command by typing @key{RET}.
+
+Some convenience variables are created automatically by @value{GDBN} and given
+values likely to be useful.
+
+@table @code
+@kindex $_
+@item $_
+The variable @code{$_} is automatically set by the @code{x} command to
+the last address examined (@pxref{Memory, ,Examining memory}).  Other
+commands which provide a default address for @code{x} to examine also
+set @code{$_} to that address; these commands include @code{info line}
+and @code{info breakpoint}.  The type of @code{$_} is @code{void *}
+except when set by the @code{x} command, in which case it is a pointer
+to the type of @code{$__}.
+
+@kindex $__
+@item $__
+The variable @code{$__} is automatically set by the @code{x} command
+to the value found in the last address examined.  Its type is chosen
+to match the format in which the data was printed.
+
+@item $_exitcode
+@kindex $_exitcode
+The variable @code{$_exitcode} is automatically set to the exit code when
+the program being debugged terminates.
+@end table
+
+@ifset HPPA
+If you refer to a function or variable name that begins with a dollar
+sign, @value{GDBN} searches for a user or system name first, before it
+searches for a convenience variable.
+@end ifset
+
+@node Registers, Floating Point Hardware, Convenience Vars, Data
+@section Registers
+
+@cindex registers
+You can refer to machine register contents, in expressions, as variables
+with names starting with @samp{$}.  The names of registers are different
+for each machine; use @code{info registers} to see the names used on
+your machine.
+
+@table @code
+@kindex info registers
+@item info registers
+Print the names and values of all registers except floating-point
+registers (in the selected stack frame).
+
+@kindex info all-registers
+@cindex floating point registers
+@item info all-registers
+Print the names and values of all registers, including floating-point
+registers.
+
+@item info registers @var{regname} @dots{}
+Print the @dfn{relativized} value of each specified register @var{regname}.
+As discussed in detail below, register values are normally relative to 
+the selected stack frame.  @var{regname} may be any register name valid on 
+the machine you are using, with or without the initial @samp{$}.
+@end table
+
+@value{GDBN} has four ``standard'' register names that are available (in
+expressions) on most machines---whenever they do not conflict with an
+architecture's canonical mnemonics for registers.  The register names
+@code{$pc} and @code{$sp} are used for the program counter register and
+the stack pointer.  @code{$fp} is used for a register that contains a
+pointer to the current stack frame, and @code{$ps} is used for a
+register that contains the processor status.  For example,
+you could print the program counter in hex with
+
+@example
+p/x $pc
+@end example
+
+@noindent
+or print the instruction to be executed next with
+
+@example
+x/i $pc
+@end example
+
+@noindent
+or add four to the stack pointer@footnote{This is a way of removing
+one word from the stack, on machines where stacks grow downward in
+memory (most machines, nowadays).  This assumes that the innermost
+stack frame is selected; setting @code{$sp} is not allowed when other
+stack frames are selected.  To pop entire frames off the stack,
+regardless of machine architecture, use @code{return};
+@pxref{Returning, ,Returning from a function}.} with
+
+@example
+set $sp += 4
+@end example
+
+Whenever possible, these four standard register names are available on
+your machine even though the machine has different canonical mnemonics,
+so long as there is no conflict.  The @code{info registers} command
+shows the canonical names.  For example, on the SPARC, @code{info
+registers} displays the processor status register as @code{$psr} but you
+can also refer to it as @code{$ps}.
+
+@value{GDBN} always considers the contents of an ordinary register as an
+integer when the register is examined in this way.  Some machines have
+special registers which can hold nothing but floating point; these
+registers are considered to have floating point values.  There is no way
+to refer to the contents of an ordinary register as floating point value
+(although you can @emph{print} it as a floating point value with
+@samp{print/f $@var{regname}}).
+
+Some registers have distinct ``raw'' and ``virtual'' data formats.  This
+means that the data format in which the register contents are saved by
+the operating system is not the same one that your program normally
+sees.  For example, the registers of the 68881 floating point
+coprocessor are always saved in ``extended'' (raw) format, but all C
+programs expect to work with ``double'' (virtual) format.  In such
+cases, @value{GDBN} normally works with the virtual format only (the format 
+that makes sense for your program), but the @code{info registers} command
+prints the data in both formats.
+
+Normally, register values are relative to the selected stack frame
+(@pxref{Selection, ,Selecting a frame}).  This means that you get the
+value that the register would contain if all stack frames farther in
+were exited and their saved registers restored.  In order to see the
+true contents of hardware registers, you must select the innermost
+frame (with @samp{frame 0}).
+
+However, @value{GDBN} must deduce where registers are saved, from the machine
+code generated by your compiler.  If some registers are not saved, or if
+@value{GDBN} is unable to locate the saved registers, the selected stack
+frame makes no difference.
+
+@ifset AMD29K
+@table @code
+@kindex set rstack_high_address
+@cindex AMD 29K register stack
+@cindex register stack, AMD29K
+@item set rstack_high_address @var{address}
+On AMD 29000 family processors, registers are saved in a separate
+``register stack''.  There is no way for @value{GDBN} to determine the extent
+of this stack.  Normally, @value{GDBN} just assumes that the stack is ``large
+enough''.  This may result in @value{GDBN} referencing memory locations that
+do not exist.  If necessary, you can get around this problem by
+specifying the ending address of the register stack with the @code{set
+rstack_high_address} command.  The argument should be an address, which
+you probably want to precede with @samp{0x} to specify in
+hexadecimal.
+
+@kindex show rstack_high_address
+@item show rstack_high_address
+Display the current limit of the register stack, on AMD 29000 family
+processors.
+@end table
+@end ifset
+
+@ifclear HAVE-FLOAT
+@node Floating Point Hardware,  , Registers, Data
+@section Floating point hardware
+@cindex floating point
+
+Depending on the configuration, @value{GDBN} may be able to give
+you more information about the status of the floating point hardware.
+
+@table @code
+@kindex info float
+@item info float
+Display hardware-dependent information about the floating
+point unit.  The exact contents and layout vary depending on the
+floating point chip.  Currently, @samp{info float} is supported on
+the ARM and x86 machines.
+@end table
+@end ifclear
+
+@ifclear CONLY
+@node Languages, Symbols, Data, Top
+@chapter Using @value{GDBN} with Different Languages
+@cindex languages
+
+@ifset MOD2
+Although programming languages generally have common aspects, they are
+rarely expressed in the same manner.  For instance, in ANSI C,
+dereferencing a pointer @code{p} is accomplished by @code{*p}, but in
+Modula-2, it is accomplished by @code{p^}.  Values can also be
+represented (and displayed) differently.  Hex numbers in C appear as 
+@samp{0x1ae}, while in Modula-2 they appear as @samp{1AEH}.
+@end ifset
+
+@cindex working language
+Language-specific information is built into @value{GDBN} for some languages,
+allowing you to express operations like the above in your program's
+native language, and allowing @value{GDBN} to output values in a manner
+consistent with the syntax of your program's native language.  The
+language you use to build expressions is called the @dfn{working
+language}.
+
+@menu
+* Setting::                     Switching between source languages
+* Show::                        Displaying the language
+@ifset MOD2
+* Checks::                      Type and range checks
+@end ifset
+
+* Support::                     Supported languages
+@end menu
+
+@node Setting, Show, Languages, Languages
+@section Switching between source languages
+
+There are two ways to control the working language---either have @value{GDBN}
+set it automatically, or select it manually yourself.  You can use the
+@code{set language} command for either purpose.  On startup, @value{GDBN}
+defaults to setting the language automatically.  The working language is
+used to determine how expressions you type are interpreted, how values
+are printed, etc.
+
+In addition to the working language, every source file that
+@value{GDBN} knows about has its own working language.  For some object
+file formats, the compiler might indicate which language a particular
+source file is in.  However, most of the time @value{GDBN} infers the
+language from the name of the file.  The language of a source file
+controls whether C++ names are demangled---this way @code{backtrace} can
+show each frame appropriately for its own language.  There is no way to
+set the language of a source file from within @value{GDBN}.  
+
+This is most commonly a problem when you use a program, such
+as @code{cfront} or @code{f2c}, that generates C but is written in 
+another language.  In that case, make the
+program use @code{#line} directives in its C output; that way
+@value{GDBN} will know the correct language of the source code of the original
+program, and will display that source code, not the generated C code.
+
+@menu
+* Filenames::                   Filename extensions and languages.
+* Manually::                    Setting the working language manually
+* Automatically::               Having @value{GDBN} infer the source language
+@end menu
+
+@node Filenames, Manually, Setting, Setting
+@subsection List of filename extensions and languages
+
+If a source file name ends in one of the following extensions, then
+@value{GDBN} infers that its language is the one indicated.
+
+@table @file
+
+@item .c
+C source file
+
+@item .C
+@itemx .cc
+@itemx .cp
+@itemx .cpp
+@itemx .cxx
+@itemx .c++
+C++ source file
+
+@item .f
+@itemx .F
+Fortran source file
+
+@ifclear HPPA
+@item .ch
+@itemx .c186
+@itemx .c286
+CHILL source file.
+@end ifclear
+
+@ifset MOD2
+@item .mod
+Modula-2 source file
+@end ifset
+
+@item .s
+@itemx .S
+Assembler source file.  This actually behaves almost like C, but
+@value{GDBN} does not skip over function prologues when stepping.
+@end table
+
+In addition, you may set the language associated with a filename
+extension.  @xref{Show, , Displaying the language}.
+
+@node Manually, Automatically, Filenames, Setting
+@subsection Setting the working language
+
+If you allow @value{GDBN} to set the language automatically,
+expressions are interpreted the same way in your debugging session and
+your program.
+
+@kindex set language
+If you wish, you may set the language manually.  To do this, issue the
+command @samp{set language @var{lang}}, where @var{lang} is the name of
+a language, such as 
+@ifclear MOD2
+@code{c}.
+@end ifclear
+@ifset MOD2
+@code{c} or @code{modula-2}.
+@end ifset
+For a list of the supported languages, type @samp{set language}.
+
+@ifclear MOD2
+Setting the language manually prevents @value{GDBN} from updating the
+working language automatically.  For example, if you used the @code{c}
+setting to debug a C++ program, names might not be demangled properly,
+overload resolution would not work, user-defined operators might not be
+interpreted correctly, and so on.
+@end ifclear
+@ifset MOD2
+Setting the language manually prevents @value{GDBN} from updating the working
+language automatically.  This can lead to confusion if you try
+to debug a program when the working language is not the same as the
+source language, when an expression is acceptable to both
+languages---but means different things.  For instance, if the current
+source file were written in C, and @value{GDBN} was parsing Modula-2, a
+command such as:
+
+@example
+print a = b + c
+@end example
+
+@noindent
+might not have the effect you intended.  In C, this means to add
+@code{b} and @code{c} and place the result in @code{a}.  The result
+printed would be the value of @code{a}.  In Modula-2, this means to compare
+@code{a} to the result of @code{b+c}, yielding a @code{BOOLEAN} value.
+@end ifset
+
+@node Automatically,  , Manually, Setting
+@subsection Having @value{GDBN} infer the source language
+
+To have @value{GDBN} set the working language automatically, use
+@samp{set language local} or @samp{set language auto}.  @value{GDBN}
+then infers the working language.  That is, when your program stops in a
+frame (usually by encountering a breakpoint), @value{GDBN} sets the
+working language to the language recorded for the function in that
+frame.  If the language for a frame is unknown (that is, if the function
+or block corresponding to the frame was defined in a source file that
+does not have a recognized extension), the current working language is
+not changed, and @value{GDBN} issues a warning.
+
+This may not seem necessary for most programs, which are written
+entirely in one source language.  However, program modules and libraries
+written in one source language can be used by a main program written in
+a different source language.  Using @samp{set language auto} in this
+case frees you from having to set the working language manually.
+
+@ifset MOD2
+@node Show, Checks, Setting, Languages
+@section Displaying the language
+@end ifset
+@ifclear MOD2
+@node Show, Support, Setting, Languages
+@section Displaying the language
+@end ifclear
+
+The following commands help you find out which language is the
+working language, and also what language source files were written in.
+
+@kindex show language
+@kindex info frame
+@kindex info source
+@table @code
+@item show language
+Display the current working language.  This is the
+language you can use with commands such as @code{print} to
+build and compute expressions that may involve variables in your program.
+
+@item info frame
+Display the source language for this frame.  This language becomes the 
+working language if you use an identifier from this frame.
+@xref{Frame Info, ,Information about a frame}, to identify the other 
+information listed here.
+
+@item info source
+Display the source language of this source file.
+@xref{Symbols, ,Examining the Symbol Table}, to identify the other 
+information listed here.
+@end table
+
+In unusual circumstances, you may have source files with extensions
+not in the standard list.  You can then set the extension associated
+with a language explicitly:
+
+@kindex set extension-language
+@kindex info extensions
+@table @code
+@item set extension-language @var{.ext} @var{language}
+Set source files with extension @var{.ext} to be assumed to be in
+the source language @var{language}.
+
+@item info extensions
+List all the filename extensions and the associated languages.
+@end table
+
+@ifset MOD2
+@node Checks, Support, Show, Languages
+@section Type and range checking
+
+@quotation
+@emph{Warning:} In this release, the @value{GDBN} commands for type and range
+checking are included, but they do not yet have any effect.  This
+section documents the intended facilities.
+@end quotation
+@c FIXME remove warning when type/range code added
+
+Some languages are designed to guard you against making seemingly common
+errors through a series of compile- and run-time checks.  These include
+checking the type of arguments to functions and operators, and making
+sure mathematical overflows are caught at run time.  Checks such as
+these help to ensure a program's correctness once it has been compiled
+by eliminating type mismatches, and providing active checks for range
+errors when your program is running.
+
+@value{GDBN} can check for conditions like the above if you wish.
+Although @value{GDBN} does not check the statements in your program, it
+can check expressions entered directly into @value{GDBN} for evaluation via
+the @code{print} command, for example.  As with the working language,
+@value{GDBN} can also decide whether or not to check automatically based on
+your program's source language.  @xref{Support, ,Supported languages},
+for the default settings of supported languages.
+
+@menu
+* Type Checking::               An overview of type checking
+* Range Checking::              An overview of range checking
+@end menu
+
+@cindex type checking
+@cindex checks, type
+@node Type Checking, Range Checking, Checks, Checks
+@subsection An overview of type checking
+
+Some languages, such as Modula-2, are strongly typed, meaning that the
+arguments to operators and functions have to be of the correct type,
+otherwise an error occurs.  These checks prevent type mismatch
+errors from ever causing any run-time problems.  For example,
+
+@smallexample
+1 + 2 @result{} 3
+@exdent but
+@error{} 1 + 2.3
+@end smallexample
+
+The second example fails because the @code{CARDINAL} 1 is not
+type-compatible with the @code{REAL} 2.3.
+
+For the expressions you use in @value{GDBN} commands, you can tell the 
+@value{GDBN} type checker to skip checking; 
+to treat any mismatches as errors and abandon the expression; 
+or to only issue warnings when type mismatches occur, 
+but evaluate the expression anyway.  When you choose the last of
+these, @value{GDBN} evaluates expressions like the second example above, but
+also issues a warning.
+
+Even if you turn type checking off, there may be other reasons 
+related to type that prevent @value{GDBN} from evaluating an expression.  
+For instance, @value{GDBN} does not know how to add an @code{int} and 
+a @code{struct foo}.  These particular type errors have nothing to do 
+with the language in use, and usually arise from expressions, such as 
+the one described above, which make little sense to evaluate anyway.
+
+Each language defines to what degree it is strict about type.  For
+instance, both Modula-2 and C require the arguments to arithmetical
+operators to be numbers.  In C, enumerated types and pointers can be
+represented as numbers, so that they are valid arguments to mathematical
+operators.  @xref{Support, ,Supported languages}, for further
+details on specific languages.
+
+@value{GDBN} provides some additional commands for controlling the type checker:
+
+@kindex set check
+@kindex set check type
+@kindex show check type
+@table @code
+@item set check type auto
+Set type checking on or off based on the current working language.
+@xref{Support, ,Supported languages}, for the default settings for
+each language.
+
+@item set check type on
+@itemx set check type off
+Set type checking on or off, overriding the default setting for the
+current working language.  Issue a warning if the setting does not
+match the language default.  If any type mismatches occur in
+evaluating an expression while typechecking is on, @value{GDBN} prints a
+message and aborts evaluation of the expression.
+
+@item set check type warn
+Cause the type checker to issue warnings, but to always attempt to
+evaluate the expression.  Evaluating the expression may still
+be impossible for other reasons.  For example, @value{GDBN} cannot add
+numbers and structures.
+
+@item show type
+Show the current setting of the type checker, and whether or not @value{GDBN} 
+is setting it automatically.
+@end table
+
+@cindex range checking
+@cindex checks, range
+@node Range Checking,  , Type Checking, Checks
+@subsection An overview of range checking
+
+In some languages (such as Modula-2), it is an error to exceed the
+bounds of a type; this is enforced with run-time checks.  Such range
+checking is meant to ensure program correctness by making sure
+computations do not overflow, or indices on an array element access do
+not exceed the bounds of the array.
+
+For expressions you use in @value{GDBN} commands, you can tell
+@value{GDBN} to treat range errors in one of three ways: ignore them,
+always treat them as errors and abandon the expression, or issue
+warnings but evaluate the expression anyway.
+
+A range error can result from numerical overflow, from exceeding an
+array index bound, or when you type a constant that is not a member
+of any type.  Some languages, however, do not treat overflows as an
+error.  In many implementations of C, mathematical overflow causes the
+result to ``wrap around'' to lower values---for example, if @var{m} is
+the largest integer value, and @var{s} is the smallest, then
+
+@example
+@var{m} + 1 @result{} @var{s}
+@end example
+
+This, too, is specific to individual languages, and in some cases
+specific to individual compilers or machines.  @xref{Support, ,
+Supported languages}, for further details on specific languages.
+
+@value{GDBN} provides some additional commands for controlling the range checker:
+
+@kindex set check
+@kindex set check range
+@kindex show check range
+@table @code
+@item set check range auto
+Set range checking on or off based on the current working language.
+@xref{Support, ,Supported languages}, for the default settings for
+each language.
+
+@item set check range on
+@itemx set check range off
+Set range checking on or off, overriding the default setting for the
+current working language.  A warning is issued if the setting does not
+match the language default.  If a range error occurs, then a message
+is printed and evaluation of the expression is aborted.
+
+@item set check range warn
+Output messages when the @value{GDBN} range checker detects a range error,
+but attempt to evaluate the expression anyway.  Evaluating the
+expression may still be impossible for other reasons, such as accessing
+memory that the process does not own (a typical example from many Unix
+systems).
+
+@item show range
+Show the current setting of the range checker, and whether or not it is
+being set automatically by @value{GDBN}.
+@end table
+@end ifset
+
+@ifset MOD2
+@node Support,  , Checks, Languages
+@section Supported languages
+@end ifset
+@ifclear MOD2
+@node Support,  , Show, Languages
+@section Supported languages
+@end ifclear
+
+@ifset MOD2
+@value{GDBN} supports C, C++, Fortran, Chill, assembly, and Modula-2.
+@end ifset
+@ifclear MOD2
+@value{GDBN} supports C, C++, Fortran, Chill, and assembly.
+@end ifclear
+Some @value{GDBN} features may be used in expressions regardless of the
+language you use: the @value{GDBN} @code{@@} and @code{::} operators,
+and the @samp{@{type@}addr} construct (@pxref{Expressions,
+,Expressions}) can be used with the constructs of any supported
+language.
+
+The following sections detail to what degree each source language is
+supported by @value{GDBN}.  These sections are not meant to be language
+tutorials or references, but serve only as a reference guide to what the
+@value{GDBN} expression parser accepts, and what input and output
+formats should look like for different languages.  There are many good
+books written on each of these languages; please look to these for a
+language reference or tutorial.
+
+@ifset MOD2
+@menu
+* C::                           C and C++
+* Modula-2::                    Modula-2
+@end menu
+
+@node C, Modula-2, , Support
+@subsection C and C++
+@cindex C and C++
+@cindex expressions in C or C++
+@end ifset
+
+Since C and C++ are so closely related, many features of @value{GDBN} apply
+to both languages.  Whenever this is the case, we discuss those languages
+together.
+
+@ifclear MOD2
+@c Cancel this below, under same condition, at end of this chapter!
+@raisesections
+@end ifclear
+
+@ifclear HPPA
+@cindex C++
+@kindex g++
+@cindex @sc{gnu} C++
+The C++ debugging facilities are jointly implemented by the C++
+compiler and @value{GDBN}.  Therefore, to debug your C++ code
+effectively, you must compile your C++ programs with a supported
+C++ compiler, such as @sc{gnu} @code{g++}, or the HP ANSI C++
+compiler (@code{aCC}).
+
+For best results when using @sc{gnu} C++, use the stabs debugging
+format.  You can select that format explicitly with the @code{g++}
+command-line options @samp{-gstabs} or @samp{-gstabs+}.  See
+@ref{Debugging Options,,Options for Debugging Your Program or @sc{gnu}
+CC, gcc.info, Using @sc{gnu} CC}, for more information.
+@end ifclear
+@ifset HPPA
+@cindex C++
+@kindex g++
+@cindex @sc{gnu} C++
+You can use @value{GDBN} to debug C programs compiled with either the HP
+C compiler (@code{cc}) or the GNU C compiler (@code{gcc}), and to debug
+programs compiled with either the HP ANSI C++ compiler (@code{aCC}) or
+the @sc{gnu} C++ compiler (@code{g++}).
+
+If you compile with the @sc{gnu} C++ compiler, use the stabs debugging
+format for best results when debugging.  You can select that format
+explicitly with the @code{g++} command-line options @samp{-gstabs} or
+@samp{-gstabs+}.  See @ref{Debugging Options,,Options for Debugging Your
+Program or @sc{gnu} CC, gcc.info, Using @sc{gnu} CC}, for more
+information.
+@end ifset
+@end ifclear
+
+@ifset CONLY
+@node C, Symbols, Data, Top
+@chapter C Language Support
+@cindex C language
+@cindex expressions in C
+
+Information specific to the C language is built into @value{GDBN} so that you
+can use C expressions while debugging.  This also permits @value{GDBN} to
+output values in a manner consistent with C conventions.
+
+@menu
+* C Operators::                 C operators
+@end menu
+@end ifset
+
+@ifclear CONLY
+@menu
+* C Operators::                 C and C++ operators
+* C Constants::                 C and C++ constants
+* Cplus expressions::           C++ expressions
+* C Defaults::                  Default settings for C and C++
+@ifset MOD2
+* C Checks::                    C and C++ type and range checks
+@end ifset
+
+* Debugging C::                 @value{GDBN} and C
+* Debugging C plus plus::       @value{GDBN} features for C++
+@end menu
+@end ifclear
+
+@ifclear CONLY
+@cindex C and C++ operators
+@node C Operators, C Constants, , C
+@subsubsection C and C++ operators
+@end ifclear
+@ifset CONLY
+@cindex C operators
+@node C Operators, C Constants, C, C
+@section C operators
+@end ifset
+
+Operators must be defined on values of specific types.  For instance,
+@code{+} is defined on numbers, but not on structures.  Operators are
+often defined on groups of types.  
+
+@ifclear CONLY
+For the purposes of C and C++, the following definitions hold:
+@end ifclear
+
+@itemize @bullet
+@item
+@ifclear HPPA
+@emph{Integral types} include @code{int} with any of its storage-class
+specifiers; @code{char}; and @code{enum}.
+@end ifclear
+@ifset HPPA
+@emph{Integral types} include @code{int} with any of its storage-class
+specifiers; @code{char}; @code{enum}; and, for C++, @code{bool}.
+@end ifset
+
+@item
+@emph{Floating-point types} include @code{float} and @code{double}.
+
+@item
+@emph{Pointer types} include all types defined as @code{(@var{type}
+*)}.
+
+@item
+@emph{Scalar types} include all of the above.
+@end itemize
+
+@noindent
+The following operators are supported.  They are listed here
+in order of increasing precedence:
+
+@table @code
+@item ,
+The comma or sequencing operator.  Expressions in a comma-separated list
+are evaluated from left to right, with the result of the entire
+expression being the last expression evaluated.
+
+@item =
+Assignment.  The value of an assignment expression is the value
+assigned.  Defined on scalar types.
+
+@item @var{op}=
+Used in an expression of the form @w{@code{@var{a} @var{op}= @var{b}}},
+and translated to @w{@code{@var{a} = @var{a op b}}}.
+@w{@code{@var{op}=}} and @code{=} have the same precendence.
+@var{op} is any one of the operators @code{|}, @code{^}, @code{&},
+@code{<<}, @code{>>}, @code{+}, @code{-}, @code{*}, @code{/}, @code{%}.
+
+@item ?:
+The ternary operator.  @code{@var{a} ? @var{b} : @var{c}} can be thought
+of as:  if @var{a} then @var{b} else @var{c}.  @var{a} should be of an
+integral type.
+
+@item ||
+Logical @sc{or}.  Defined on integral types.
+
+@item &&
+Logical @sc{and}.  Defined on integral types.
+
+@item |
+Bitwise @sc{or}.  Defined on integral types.
+
+@item ^
+Bitwise exclusive-@sc{or}.  Defined on integral types.
+
+@item &
+Bitwise @sc{and}.  Defined on integral types.
+
+@item ==@r{, }!=
+Equality and inequality.  Defined on scalar types.  The value of these
+expressions is 0 for false and non-zero for true.
+
+@item <@r{, }>@r{, }<=@r{, }>=
+Less than, greater than, less than or equal, greater than or equal.
+Defined on scalar types.  The value of these expressions is 0 for false
+and non-zero for true.
+
+@item <<@r{, }>>
+left shift, and right shift.  Defined on integral types.
+
+@item @@
+The @value{GDBN} ``artificial array'' operator (@pxref{Expressions, ,Expressions}).
+
+@item +@r{, }-
+Addition and subtraction.  Defined on integral types, floating-point types and
+pointer types.
+
+@item *@r{, }/@r{, }%
+Multiplication, division, and modulus.  Multiplication and division are
+defined on integral and floating-point types.  Modulus is defined on
+integral types.
+
+@item ++@r{, }--
+Increment and decrement.  When appearing before a variable, the
+operation is performed before the variable is used in an expression;
+when appearing after it, the variable's value is used before the
+operation takes place.
+
+@item *
+Pointer dereferencing.  Defined on pointer types.  Same precedence as
+@code{++}.
+
+@item &
+Address operator.  Defined on variables.  Same precedence as @code{++}.
+
+@ifclear CONLY
+For debugging C++, @value{GDBN} implements a use of @samp{&} beyond what is
+allowed in the C++ language itself: you can use @samp{&(&@var{ref})}
+(or, if you prefer, simply @samp{&&@var{ref}}) to examine the address
+where a C++ reference variable (declared with @samp{&@var{ref}}) is
+stored.
+@end ifclear
+
+@item -
+Negative.  Defined on integral and floating-point types.  Same
+precedence as @code{++}.
+
+@item !
+Logical negation.  Defined on integral types.  Same precedence as
+@code{++}.
+
+@item ~
+Bitwise complement operator.  Defined on integral types.  Same precedence as
+@code{++}.
+
+
+@item .@r{, }->
+Structure member, and pointer-to-structure member.  For convenience,
+@value{GDBN} regards the two as equivalent, choosing whether to dereference a
+pointer based on the stored type information.
+Defined on @code{struct} and @code{union} data.
+
+@ifset HPPA
+@item .*@r{, }->*
+Dereferences of pointers to members.
+@end ifset
+
+@item []
+Array indexing.  @code{@var{a}[@var{i}]} is defined as
+@code{*(@var{a}+@var{i})}.  Same precedence as @code{->}.
+
+@item ()
+Function parameter list.  Same precedence as @code{->}.
+
+@ifclear CONLY
+@item ::
+C++ scope resolution operator.  Defined on
+@code{struct}, @code{union}, and @code{class} types.
+@end ifclear
+
+@item ::
+Doubled colons
+@ifclear CONLY
+also
+@end ifclear
+represent the @value{GDBN} scope operator (@pxref{Expressions,
+,Expressions}).
+@ifclear CONLY
+Same precedence as @code{::}, above.
+@end ifclear
+@end table
+
+@ifset HPPA
+If an operator is redefined in the user code, @value{GDBN} usually
+attempts to invoke the redefined version instead of using the operator's
+predefined meaning.
+@end ifset
+
+@ifclear CONLY
+@menu
+* C Constants::             
+@end menu
+
+@ifset MOD2
+@node C Constants, Cplus expressions, C Operators, C
+@subsubsection C and C++ constants
+@end ifset
+@ifclear MOD2
+@node C Constants, Cplus expressions, C Operators, Support
+@subsubsection C and C++ constants
+@end ifclear
+
+@cindex C and C++ constants
+@value{GDBN} allows you to express the constants of C and C++ in the
+following ways:
+@end ifclear
+@ifset CONLY
+@cindex C constants
+@node C Constants, Debugging C, C Operators, C
+@section C constants
+
+@value{GDBN} allows you to express the constants of C in the
+following ways:
+@end ifset
+
+@itemize @bullet
+@item
+Integer constants are a sequence of digits.  Octal constants are
+specified by a leading @samp{0} (i.e. zero), and hexadecimal constants by
+a leading @samp{0x} or @samp{0X}.  Constants may also end with a letter
+@samp{l}, specifying that the constant should be treated as a
+@code{long} value.
+
+@item
+Floating point constants are a sequence of digits, followed by a decimal
+point, followed by a sequence of digits, and optionally followed by an
+exponent.  An exponent is of the form:
+@samp{@w{e@r{[[}+@r{]|}-@r{]}@var{nnn}}}, where @var{nnn} is another
+sequence of digits.  The @samp{+} is optional for positive exponents.
+
+@item
+Enumerated constants consist of enumerated identifiers, or their
+integral equivalents.
+
+@item
+Character constants are a single character surrounded by single quotes
+(@code{'}), or a number---the ordinal value of the corresponding character
+(usually its @sc{ASCII} value).  Within quotes, the single character may
+be represented by a letter or by @dfn{escape sequences}, which are of
+the form @samp{\@var{nnn}}, where @var{nnn} is the octal representation
+of the character's ordinal value; or of the form @samp{\@var{x}}, where
+@samp{@var{x}} is a predefined special character---for example,
+@samp{\n} for newline.
+
+@item
+String constants are a sequence of character constants surrounded
+by double quotes (@code{"}).
+
+@item
+Pointer constants are an integral value.  You can also write pointers
+to constants using the C operator @samp{&}.
+
+@item
+Array constants are comma-separated lists surrounded by braces @samp{@{}
+and @samp{@}}; for example, @samp{@{1,2,3@}} is a three-element array of
+integers, @samp{@{@{1,2@}, @{3,4@}, @{5,6@}@}} is a three-by-two array,
+and @samp{@{&"hi", &"there", &"fred"@}} is a three-element array of pointers.
+@end itemize
+
+@ifclear CONLY
+@menu
+* Cplus expressions::           
+* C Defaults::                  
+@ifset MOD2
+* C Checks::                    
+@end ifset
+
+* Debugging C::                 
+@end menu
+
+@ifset MOD2
+@node Cplus expressions, C Defaults, C Constants, C
+@subsubsection C++ expressions
+@end ifset
+@ifclear MOD2
+@node Cplus expressions, C Defaults, C Constants, Support
+@subsubsection C++ expressions
+@end ifclear
+
+@cindex expressions in C++
+@value{GDBN} expression handling can interpret most C++ expressions.
+
+@ifclear HPPA
+@cindex C++ support, not in @sc{coff}
+@cindex @sc{coff} versus C++
+@cindex C++ and object formats
+@cindex object formats and C++
+@cindex a.out and C++
+@cindex @sc{ecoff} and C++
+@cindex @sc{xcoff} and C++
+@cindex @sc{elf}/stabs and C++
+@cindex @sc{elf}/@sc{dwarf} and C++
+@c FIXME!! GDB may eventually be able to debug C++ using DWARF; check
+@c periodically whether this has happened...
+@quotation
+@emph{Warning:} @value{GDBN} can only debug C++ code if you use the
+proper compiler.  Typically, C++ debugging depends on the use of
+additional debugging information in the symbol table, and thus requires
+special support.  In particular, if your compiler generates a.out, MIPS
+@sc{ecoff}, RS/6000 @sc{xcoff}, or @sc{elf} with stabs extensions to the
+symbol table, these facilities are all available.  (With @sc{gnu} CC,
+you can use the @samp{-gstabs} option to request stabs debugging
+extensions explicitly.)  Where the object code format is standard
+@sc{coff} or @sc{dwarf} in @sc{elf}, on the other hand, most of the C++
+support in @value{GDBN} does @emph{not} work.
+@end quotation
+@end ifclear
+
+@enumerate
+
+@cindex member functions
+@item
+Member function calls are allowed; you can use expressions like
+
+@example
+count = aml->GetOriginal(x, y)
+@end example
+
+@kindex this
+@cindex namespace in C++
+@item
+While a member function is active (in the selected stack frame), your
+expressions have the same namespace available as the member function;
+that is, @value{GDBN} allows implicit references to the class instance
+pointer @code{this} following the same rules as C++.
+
+@ifclear HPPA
+@cindex call overloaded functions
+@cindex type conversions in C++
+@item
+You can call overloaded functions; @value{GDBN} resolves the function
+call to the right definition, with one restriction---you must use
+arguments of the type required by the function that you want to call.
+@value{GDBN} does not perform conversions requiring constructors or
+user-defined type operators.
+@end ifclear
+@ifset HPPA
+@cindex call overloaded functions
+@cindex overloaded functions
+@cindex type conversions in C++
+@item
+You can call overloaded functions; @value{GDBN} resolves the function
+call to the right definition, with some restrictions.  GDB does not
+perform overload resolution involving user-defined type conversions,
+calls to constructors, or instantiations of templates that do not exist
+in the program.  It also cannot handle ellipsis argument lists or
+default arguments.
+
+It does perform integral conversions and promotions, floating-point
+promotions, arithmetic conversions, pointer conversions, conversions of
+class objects to base classes, and standard conversions such as those of
+functions or arrays to pointers; it requires an exact match on the
+number of function arguments.
+
+Overload resolution is always performed, unless you have specified
+@code{set overload-resolution off}.  @xref{Debugging C plus plus,
+,@value{GDBN} features for C++}.
+
+You must specify@code{set overload-resolution off} in order to use an
+explicit function signature to call an overloaded function, as in
+@smallexample
+p 'foo(char,int)'('x', 13)
+@end smallexample
+The @value{GDBN} command-completion facility can simplify this;
+@pxref{Completion, ,Command completion}.
+
+@end ifset
+
+@cindex reference declarations
+@item
+@value{GDBN} understands variables declared as C++ references; you can use 
+them in expressions just as you do in C++ source---they are automatically
+dereferenced.
+
+In the parameter list shown when @value{GDBN} displays a frame, the values of
+reference variables are not displayed (unlike other variables); this
+avoids clutter, since references are often used for large structures.
+The @emph{address} of a reference variable is always shown, unless
+you have specified @samp{set print address off}.
+
+@item
+@value{GDBN} supports the C++ name resolution operator @code{::}---your
+expressions can use it just as expressions in your program do.  Since
+one scope may be defined in another, you can use @code{::} repeatedly if
+necessary, for example in an expression like
+@samp{@var{scope1}::@var{scope2}::@var{name}}.  @value{GDBN} also allows
+resolving name scope by reference to source files, in both C and C++
+debugging (@pxref{Variables, ,Program variables}).
+@end enumerate
+
+@ifset HPPA
+In addition, @value{GDBN} supports calling virtual functions correctly,
+printing out virtual bases of objects, calling functions in a base
+subobject, casting objects, and invoking user-defined operators.
+@end ifset
+
+@ifset MOD2
+@node C Defaults, C Checks, Cplus expressions, C
+@subsubsection C and C++ defaults
+@end ifset
+@ifclear MOD2
+@node C Defaults, Debugging C, Cplus expressions, Support
+@subsubsection C and C++ defaults
+@end ifclear
+@cindex C and C++ defaults
+
+@ifclear HPPA
+If you allow @value{GDBN} to set type and range checking automatically, they
+both default to @code{off} whenever the working language changes to
+C or C++.  This happens regardless of whether you or @value{GDBN}
+selects the working language.
+@end ifclear
+
+If you allow @value{GDBN} to set the language automatically, it
+recognizes source files whose names end with @file{.c}, @file{.C}, or
+@file{.cc}, etc, and when @value{GDBN} enters code compiled from one of
+these files, it sets the working language to C or C++.
+@xref{Automatically, ,Having @value{GDBN} infer the source language},
+for further details.
+
+@ifset MOD2
+@c Type checking is (a) primarily motivated by Modula-2, and (b)
+@c unimplemented.  If (b) changes, it might make sense to let this node
+@c appear even if Mod-2 does not, but meanwhile ignore it. roland 16jul93.
+@node C Checks, Debugging C, C Defaults, C Constants
+@subsubsection C and C++ type and range checks
+@cindex C and C++ checks
+
+By default, when @value{GDBN} parses C or C++ expressions, type checking
+is not used.  However, if you turn type checking on, @value{GDBN}
+considers two variables type equivalent if:
+
+@itemize @bullet
+@item
+The two variables are structured and have the same structure, union, or
+enumerated tag.
+
+@item
+The two variables have the same type name, or types that have been
+declared equivalent through @code{typedef}.
+
+@ignore
+@c leaving this out because neither J Gilmore nor R Pesch understand it.
+@c FIXME--beers?
+@item
+The two @code{struct}, @code{union}, or @code{enum} variables are
+declared in the same declaration.  (Note: this may not be true for all C
+compilers.)
+@end ignore
+@end itemize
+
+Range checking, if turned on, is done on mathematical operations.  Array
+indices are not checked, since they are often used to index a pointer
+that is not itself an array.
+@end ifset
+@end ifclear
+
+@ifclear CONLY
+@ifset MOD2
+@node Debugging C, Debugging C plus plus, C Checks, C
+@subsubsection @value{GDBN} and C
+@end ifset
+@ifclear MOD2
+@node Debugging C, Debugging C plus plus, C Defaults, Support
+@subsubsection @value{GDBN} and C
+@end ifclear
+@end ifclear
+@ifset CONLY
+@node Debugging C,  , C Constants, C
+@section @value{GDBN} and C
+@end ifset
+
+The @code{set print union} and @code{show print union} commands apply to
+the @code{union} type.  When set to @samp{on}, any @code{union} that is
+inside a @code{struct}
+@ifclear CONLY
+or @code{class}
+@end ifclear
+is also printed.
+Otherwise, it appears as @samp{@{...@}}.
+
+The @code{@@} operator aids in the debugging of dynamic arrays, formed
+with pointers and a memory allocation function.  @xref{Expressions,
+,Expressions}.
+
+@ifclear CONLY
+@menu
+* Debugging C plus plus::       
+@end menu
+
+@ifset MOD2
+@node Debugging C plus plus,  , Debugging C, C
+@subsubsection @value{GDBN} features for C++
+@end ifset
+@ifclear MOD2
+@node Debugging C plus plus,  , Debugging C, Support
+@subsubsection @value{GDBN} features for C++
+@end ifclear
+
+@cindex commands for C++
+Some @value{GDBN} commands are particularly useful with C++, and some are
+designed specifically for use with C++.  Here is a summary:
+
+@table @code
+@cindex break in overloaded functions
+@item @r{breakpoint menus}
+When you want a breakpoint in a function whose name is overloaded,
+@value{GDBN} breakpoint menus help you specify which function definition
+you want.  @xref{Breakpoint Menus,,Breakpoint menus}.
+
+@cindex overloading in C++
+@item rbreak @var{regex}
+Setting breakpoints using regular expressions is helpful for setting
+breakpoints on overloaded functions that are not members of any special
+classes.
+@xref{Set Breaks, ,Setting breakpoints}.
+
+@cindex C++ exception handling
+@item catch throw
+@itemx catch catch
+Debug C++ exception handling using these commands.  @xref{Set
+Catchpoints, , Setting catchpoints}.
+
+@cindex inheritance
+@item ptype @var{typename}
+Print inheritance relationships as well as other information for type
+@var{typename}.
+@xref{Symbols, ,Examining the Symbol Table}.
+
+@cindex C++ symbol display
+@item set print demangle
+@itemx show print demangle
+@itemx set print asm-demangle
+@itemx show print asm-demangle
+Control whether C++ symbols display in their source form, both when
+displaying code as C++ source and when displaying disassemblies.
+@xref{Print Settings, ,Print settings}.
+
+@item set print object
+@itemx show print object
+Choose whether to print derived (actual) or declared types of objects.
+@xref{Print Settings, ,Print settings}.
+
+@item set print vtbl
+@itemx show print vtbl
+Control the format for printing virtual function tables.
+@xref{Print Settings, ,Print settings}.
+@ifset HPPA
+(The @code{vtbl} commands do not work on programs compiled with the HP
+ANSI C++ compiler (@code{aCC}).)
+
+@kindex set overload-resolution
+@cindex overloaded functions
+@item set overload-resolution on
+Enable overload resolution for C++ expression evaluation.  The default
+is on.  For overloaded functions, @value{GDBN} evaluates the arguments
+and searches for a function whose signature matches the argument types,
+using the standard C++ conversion rules (@pxref{Cplus expressions, ,C++
+expressions} for details).  If it cannot find a match, it emits a
+message.
+
+@item set overload-resolution off
+Disable overload resolution for C++ expression evaluation.  For
+overloaded functions that are not class member functions, @value{GDBN}
+chooses the first function of the specified name that it finds in the
+symbol table, whether or not its arguments are of the correct type.  For
+overloaded functions that are class member functions, @value{GDBN}
+searches for a function whose signature @emph{exactly} matches the
+argument types.
+@end ifset
+
+@item @r{Overloaded symbol names}
+You can specify a particular definition of an overloaded symbol, using
+the same notation that is used to declare such symbols in C++: type
+@code{@var{symbol}(@var{types})} rather than just @var{symbol}.  You can
+also use the @value{GDBN} command-line word completion facilities to list the
+available choices, or to finish the type list for you.
+@xref{Completion,, Command completion}, for details on how to do this.
+@end table
+@ifclear MOD2
+@c cancels "raisesections" under same conditions near bgn of chapter
+@lowersections
+@end ifclear
+
+@ifset MOD2
+@node Modula-2,  ,C , Support
+@subsection Modula-2
+@cindex Modula-2
+
+The extensions made to @value{GDBN} to support Modula-2 only support
+output from the @sc{gnu} Modula-2 compiler (which is currently being
+developed).  Other Modula-2 compilers are not currently supported, and
+attempting to debug executables produced by them is most likely
+to give an error as @value{GDBN} reads in the executable's symbol
+table.
+
+@cindex expressions in Modula-2
+@menu
+* M2 Operators::                Built-in operators
+* Built-In Func/Proc::          Built-in functions and procedures
+* M2 Constants::                Modula-2 constants
+* M2 Defaults::                 Default settings for Modula-2
+* Deviations::                  Deviations from standard Modula-2
+* M2 Checks::                   Modula-2 type and range checks
+* M2 Scope::                    The scope operators @code{::} and @code{.}
+* GDB/M2::                      @value{GDBN} and Modula-2
+@end menu
+
+@node M2 Operators, Built-In Func/Proc, Modula-2, Modula-2
+@subsubsection Operators
+@cindex Modula-2 operators
+
+Operators must be defined on values of specific types.  For instance,
+@code{+} is defined on numbers, but not on structures.  Operators are
+often defined on groups of types.  For the purposes of Modula-2, the
+following definitions hold:
+
+@itemize @bullet
+
+@item
+@emph{Integral types} consist of @code{INTEGER}, @code{CARDINAL}, and
+their subranges.
+
+@item
+@emph{Character types} consist of @code{CHAR} and its subranges.
+
+@item
+@emph{Floating-point types} consist of @code{REAL}.
+
+@item
+@emph{Pointer types} consist of anything declared as @code{POINTER TO
+@var{type}}.
+
+@item
+@emph{Scalar types} consist of all of the above.
+
+@item
+@emph{Set types} consist of @code{SET} and @code{BITSET} types.
+
+@item
+@emph{Boolean types} consist of @code{BOOLEAN}.
+@end itemize
+
+@noindent
+The following operators are supported, and appear in order of
+increasing precedence:
+
+@table @code
+@item ,
+Function argument or array index separator.
+
+@item :=
+Assignment.  The value of @var{var} @code{:=} @var{value} is
+@var{value}.
+
+@item <@r{, }>
+Less than, greater than on integral, floating-point, or enumerated
+types.
+
+@item <=@r{, }>=
+Less than, greater than, less than or equal to, greater than or equal to
+on integral, floating-point and enumerated types, or set inclusion on
+set types.  Same precedence as @code{<}.
+
+@item =@r{, }<>@r{, }#
+Equality and two ways of expressing inequality, valid on scalar types.
+Same precedence as @code{<}.  In @value{GDBN} scripts, only @code{<>} is
+available for inequality, since @code{#} conflicts with the script
+comment character.
+
+@item IN
+Set membership.  Defined on set types and the types of their members.
+Same precedence as @code{<}.
+
+@item OR
+Boolean disjunction.  Defined on boolean types.
+
+@item AND@r{, }&
+Boolean conjuction.  Defined on boolean types.
+
+@item @@
+The @value{GDBN} ``artificial array'' operator (@pxref{Expressions, ,Expressions}).
+
+@item +@r{, }-
+Addition and subtraction on integral and floating-point types, or union
+and difference on set types.
+
+@item *
+Multiplication on integral and floating-point types, or set intersection
+on set types.
+
+@item /
+Division on floating-point types, or symmetric set difference on set
+types.  Same precedence as @code{*}.
+
+@item DIV@r{, }MOD
+Integer division and remainder.  Defined on integral types.  Same
+precedence as @code{*}.
+
+@item -
+Negative. Defined on @code{INTEGER} and @code{REAL} data.
+
+@item ^
+Pointer dereferencing.  Defined on pointer types.
+
+@item NOT
+Boolean negation.  Defined on boolean types.  Same precedence as
+@code{^}.
+
+@item .
+@code{RECORD} field selector.  Defined on @code{RECORD} data.  Same
+precedence as @code{^}.
+
+@item []
+Array indexing.  Defined on @code{ARRAY} data.  Same precedence as @code{^}.
+
+@item ()
+Procedure argument list.  Defined on @code{PROCEDURE} objects.  Same precedence
+as @code{^}.
+
+@item ::@r{, }.
+@value{GDBN} and Modula-2 scope operators.
+@end table
+
+@quotation
+@emph{Warning:} Sets and their operations are not yet supported, so @value{GDBN}
+treats the use of the operator @code{IN}, or the use of operators
+@code{+}, @code{-}, @code{*}, @code{/}, @code{=}, , @code{<>}, @code{#},
+@code{<=}, and @code{>=} on sets as an error.
+@end quotation
+
+@cindex Modula-2 built-ins
+@node Built-In Func/Proc, M2 Constants, M2 Operators, Modula-2
+@subsubsection Built-in functions and procedures
+
+Modula-2 also makes available several built-in procedures and functions.
+In describing these, the following metavariables are used:
+
+@table @var
+
+@item a
+represents an @code{ARRAY} variable.
+
+@item c
+represents a @code{CHAR} constant or variable.
+
+@item i
+represents a variable or constant of integral type.
+
+@item m
+represents an identifier that belongs to a set.  Generally used in the
+same function with the metavariable @var{s}.  The type of @var{s} should
+be @code{SET OF @var{mtype}} (where @var{mtype} is the type of @var{m}).
+
+@item n
+represents a variable or constant of integral or floating-point type.
+
+@item r
+represents a variable or constant of floating-point type.
+
+@item t
+represents a type.
+
+@item v
+represents a variable.
+
+@item x
+represents a variable or constant of one of many types.  See the
+explanation of the function for details.
+@end table
+
+All Modula-2 built-in procedures also return a result, described below.
+
+@table @code
+@item ABS(@var{n})
+Returns the absolute value of @var{n}.
+
+@item CAP(@var{c})
+If @var{c} is a lower case letter, it returns its upper case
+equivalent, otherwise it returns its argument
+
+@item CHR(@var{i})
+Returns the character whose ordinal value is @var{i}.
+
+@item DEC(@var{v})
+Decrements the value in the variable @var{v}.  Returns the new value.
+
+@item DEC(@var{v},@var{i})
+Decrements the value in the variable @var{v} by @var{i}.  Returns the
+new value.
+
+@item EXCL(@var{m},@var{s})
+Removes the element @var{m} from the set @var{s}.  Returns the new
+set.
+
+@item FLOAT(@var{i})
+Returns the floating point equivalent of the integer @var{i}.
+
+@item HIGH(@var{a})
+Returns the index of the last member of @var{a}.
+
+@item INC(@var{v})
+Increments the value in the variable @var{v}.  Returns the new value.
+
+@item INC(@var{v},@var{i})
+Increments the value in the variable @var{v} by @var{i}.  Returns the
+new value.
+
+@item INCL(@var{m},@var{s})
+Adds the element @var{m} to the set @var{s} if it is not already
+there.  Returns the new set.
+
+@item MAX(@var{t})
+Returns the maximum value of the type @var{t}.
+
+@item MIN(@var{t})
+Returns the minimum value of the type @var{t}.
+
+@item ODD(@var{i})
+Returns boolean TRUE if @var{i} is an odd number.
+
+@item ORD(@var{x})
+Returns the ordinal value of its argument.  For example, the ordinal
+value of a character is its ASCII value (on machines supporting the
+ASCII character set).  @var{x} must be of an ordered type, which include
+integral, character and enumerated types.
+
+@item SIZE(@var{x})
+Returns the size of its argument.  @var{x} can be a variable or a type.
+
+@item TRUNC(@var{r})
+Returns the integral part of @var{r}.
+
+@item VAL(@var{t},@var{i})
+Returns the member of the type @var{t} whose ordinal value is @var{i}.
+@end table
+
+@quotation
+@emph{Warning:}  Sets and their operations are not yet supported, so
+@value{GDBN} treats the use of procedures @code{INCL} and @code{EXCL} as
+an error.
+@end quotation
+
+@cindex Modula-2 constants
+@node M2 Constants, M2 Defaults, Built-In Func/Proc, Modula-2
+@subsubsection Constants
+
+@value{GDBN} allows you to express the constants of Modula-2 in the following
+ways:
+
+@itemize @bullet
+
+@item
+Integer constants are simply a sequence of digits.  When used in an
+expression, a constant is interpreted to be type-compatible with the
+rest of the expression.  Hexadecimal integers are specified by a
+trailing @samp{H}, and octal integers by a trailing @samp{B}.
+
+@item
+Floating point constants appear as a sequence of digits, followed by a
+decimal point and another sequence of digits.  An optional exponent can
+then be specified, in the form @samp{E@r{[}+@r{|}-@r{]}@var{nnn}}, where
+@samp{@r{[}+@r{|}-@r{]}@var{nnn}} is the desired exponent.  All of the
+digits of the floating point constant must be valid decimal (base 10)
+digits.
+
+@item
+Character constants consist of a single character enclosed by a pair of
+like quotes, either single (@code{'}) or double (@code{"}).  They may
+also be expressed by their ordinal value (their ASCII value, usually)
+followed by a @samp{C}.
+
+@item
+String constants consist of a sequence of characters enclosed by a
+pair of like quotes, either single (@code{'}) or double (@code{"}).
+Escape sequences in the style of C are also allowed.  @xref{C
+Constants, ,C and C++ constants}, for a brief explanation of escape
+sequences.
+
+@item
+Enumerated constants consist of an enumerated identifier.
+
+@item
+Boolean constants consist of the identifiers @code{TRUE} and
+@code{FALSE}.
+
+@item
+Pointer constants consist of integral values only.
+
+@item
+Set constants are not yet supported.
+@end itemize
+
+@node M2 Defaults, Deviations, M2 Constants, Modula-2
+@subsubsection Modula-2 defaults
+@cindex Modula-2 defaults
+
+If type and range checking are set automatically by @value{GDBN}, they
+both default to @code{on} whenever the working language changes to
+Modula-2.  This happens regardless of whether you, or @value{GDBN},
+selected the working language.
+
+If you allow @value{GDBN} to set the language automatically, then entering
+code compiled from a file whose name ends with @file{.mod} sets the
+working language to Modula-2. @xref{Automatically, ,Having @value{GDBN} set
+the language automatically}, for further details.
+
+@node Deviations, M2 Checks, M2 Defaults, Modula-2
+@subsubsection Deviations from standard Modula-2
+@cindex Modula-2, deviations from
+
+A few changes have been made to make Modula-2 programs easier to debug.
+This is done primarily via loosening its type strictness:
+
+@itemize @bullet
+@item
+Unlike in standard Modula-2, pointer constants can be formed by
+integers.  This allows you to modify pointer variables during
+debugging.  (In standard Modula-2, the actual address contained in a
+pointer variable is hidden from you; it can only be modified
+through direct assignment to another pointer variable or expression that
+returned a pointer.)
+
+@item
+C escape sequences can be used in strings and characters to represent
+non-printable characters.  @value{GDBN} prints out strings with these
+escape sequences embedded.  Single non-printable characters are
+printed using the @samp{CHR(@var{nnn})} format.
+
+@item
+The assignment operator (@code{:=}) returns the value of its right-hand
+argument.
+
+@item
+All built-in procedures both modify @emph{and} return their argument.
+@end itemize
+
+@node M2 Checks, M2 Scope, Deviations, Modula-2
+@subsubsection Modula-2 type and range checks
+@cindex Modula-2 checks
+
+@quotation
+@emph{Warning:} in this release, @value{GDBN} does not yet perform type or
+range checking.
+@end quotation
+@c FIXME remove warning when type/range checks added
+
+@value{GDBN} considers two Modula-2 variables type equivalent if:
+
+@itemize @bullet
+@item
+They are of types that have been declared equivalent via a @code{TYPE
+@var{t1} = @var{t2}} statement
+
+@item
+They have been declared on the same line.  (Note:  This is true of the
+@sc{gnu} Modula-2 compiler, but it may not be true of other compilers.)
+@end itemize
+
+As long as type checking is enabled, any attempt to combine variables
+whose types are not equivalent is an error.
+
+Range checking is done on all mathematical operations, assignment, array
+index bounds, and all built-in functions and procedures.
+
+@node M2 Scope, GDB/M2, M2 Checks, Modula-2
+@subsubsection The scope operators @code{::} and @code{.}
+@cindex scope
+@kindex .
+@cindex colon, doubled as scope operator
+@ifinfo
+@kindex colon-colon
+@c Info cannot handle :: but TeX can.
+@end ifinfo
+@iftex
+@kindex ::
+@end iftex
+
+There are a few subtle differences between the Modula-2 scope operator
+(@code{.}) and the @value{GDBN} scope operator (@code{::}).  The two have
+similar syntax:
+
+@example
+
+@var{module} . @var{id}
+@var{scope} :: @var{id}
+@end example
+
+@noindent
+where @var{scope} is the name of a module or a procedure,
+@var{module} the name of a module, and @var{id} is any declared
+identifier within your program, except another module.
+
+Using the @code{::} operator makes @value{GDBN} search the scope
+specified by @var{scope} for the identifier @var{id}.  If it is not
+found in the specified scope, then @value{GDBN} searches all scopes
+enclosing the one specified by @var{scope}.
+
+Using the @code{.} operator makes @value{GDBN} search the current scope for
+the identifier specified by @var{id} that was imported from the
+definition module specified by @var{module}.  With this operator, it is
+an error if the identifier @var{id} was not imported from definition
+module @var{module}, or if @var{id} is not an identifier in
+@var{module}.
+
+@node GDB/M2,  , M2 Scope, Modula-2
+@subsubsection @value{GDBN} and Modula-2
+
+Some @value{GDBN} commands have little use when debugging Modula-2 programs.
+Five subcommands of @code{set print} and @code{show print} apply
+specifically to C and C++: @samp{vtbl}, @samp{demangle},
+@samp{asm-demangle}, @samp{object}, and @samp{union}.  The first four
+apply to C++, and the last to the C @code{union} type, which has no direct
+analogue in Modula-2.
+
+The @code{@@} operator (@pxref{Expressions, ,Expressions}), while available
+while using any language, is not useful with Modula-2.  Its
+intent is to aid the debugging of @dfn{dynamic arrays}, which cannot be
+created in Modula-2 as they can in C or C++.  However, because an
+address can be specified by an integral constant, the construct
+@samp{@{@var{type}@}@var{adrexp}} is still useful.  (@pxref{Expressions, ,Expressions})
+
+@cindex @code{#} in Modula-2
+In @value{GDBN} scripts, the Modula-2 inequality operator @code{#} is
+interpreted as the beginning of a comment.  Use @code{<>} instead.
+@end ifset
+@end ifclear
+
+@node Symbols, Altering, Languages, Top
+@chapter Examining the Symbol Table
+
+The commands described in this section allow you to inquire about the
+symbols (names of variables, functions and types) defined in your
+program.  This information is inherent in the text of your program and
+does not change as your program executes.  @value{GDBN} finds it in your
+program's symbol table, in the file indicated when you started @value{GDBN}
+(@pxref{File Options, ,Choosing files}), or by one of the
+file-management commands (@pxref{Files, ,Commands to specify files}).
+
+@cindex symbol names
+@cindex names of symbols
+@cindex quoting names
+Occasionally, you may need to refer to symbols that contain unusual
+characters, which @value{GDBN} ordinarily treats as word delimiters.  The
+most frequent case is in referring to static variables in other
+source files (@pxref{Variables,,Program variables}).  File names
+are recorded in object files as debugging symbols, but @value{GDBN} would
+ordinarily parse a typical file name, like @file{foo.c}, as the three words
+@samp{foo} @samp{.} @samp{c}.  To allow @value{GDBN} to recognize
+@samp{foo.c} as a single symbol, enclose it in single quotes; for example,
+
+@example
+p 'foo.c'::x
+@end example
+
+@noindent
+looks up the value of @code{x} in the scope of the file @file{foo.c}.
+
+@table @code
+@kindex info address
+@item info address @var{symbol}
+Describe where the data for @var{symbol} is stored.  For a register
+variable, this says which register it is kept in.  For a non-register
+local variable, this prints the stack-frame offset at which the variable
+is always stored.
+
+Note the contrast with @samp{print &@var{symbol}}, which does not work
+at all for a register variable, and for a stack local variable prints
+the exact address of the current instantiation of the variable.
+
+@kindex whatis
+@item whatis @var{exp}
+Print the data type of expression @var{exp}.  @var{exp} is not
+actually evaluated, and any side-effecting operations (such as
+assignments or function calls) inside it do not take place.
+@xref{Expressions, ,Expressions}.
+
+@item whatis
+Print the data type of @code{$}, the last value in the value history.
+
+@kindex ptype
+@item ptype @var{typename}
+Print a description of data type @var{typename}.  @var{typename} may be
+the name of a type, or for C code it may have the form
+@ifclear CONLY
+@samp{class @var{class-name}},
+@end ifclear
+@samp{struct @var{struct-tag}}, @samp{union @var{union-tag}} or
+@samp{enum @var{enum-tag}}.
+
+@item ptype @var{exp}
+@itemx ptype
+Print a description of the type of expression @var{exp}.  @code{ptype}
+differs from @code{whatis} by printing a detailed description, instead
+of just the name of the type.
+
+For example, for this variable declaration:
+
+@example
+struct complex @{double real; double imag;@} v;
+@end example
+
+@noindent
+the two commands give this output:
+
+@example
+@group
+(@value{GDBP}) whatis v
+type = struct complex
+(@value{GDBP}) ptype v
+type = struct complex @{
+    double real;
+    double imag;
+@}
+@end group
+@end example
+
+@noindent
+As with @code{whatis}, using @code{ptype} without an argument refers to
+the type of @code{$}, the last value in the value history.
+
+@kindex info types
+@item info types @var{regexp}
+@itemx info types
+Print a brief description of all types whose name matches @var{regexp}
+(or all types in your program, if you supply no argument).  Each
+complete typename is matched as though it were a complete line; thus,
+@samp{i type value} gives information on all types in your program whose
+name includes the string @code{value}, but @samp{i type ^value$} gives
+information only on types whose complete name is @code{value}.
+
+This command differs from @code{ptype} in two ways: first, like
+@code{whatis}, it does not print a detailed description; second, it
+lists all source files where a type is defined.
+
+@kindex info source
+@item info source
+Show the name of the current source file---that is, the source file for
+the function containing the current point of execution---and the language
+it was written in.
+
+@kindex info sources
+@item info sources
+Print the names of all source files in your program for which there is
+debugging information, organized into two lists: files whose symbols
+have already been read, and files whose symbols will be read when needed.
+
+@kindex info functions
+@item info functions
+Print the names and data types of all defined functions.
+
+@item info functions @var{regexp}
+Print the names and data types of all defined functions
+whose names contain a match for regular expression @var{regexp}.
+Thus, @samp{info fun step} finds all functions whose names
+include @code{step}; @samp{info fun ^step} finds those whose names
+start with @code{step}.
+
+@kindex info variables
+@item info variables
+Print the names and data types of all variables that are declared
+outside of functions (i.e., excluding local variables).
+
+@item info variables @var{regexp}
+Print the names and data types of all variables (except for local
+variables) whose names contain a match for regular expression
+@var{regexp}.
+
+@ignore
+This was never implemented.
+@kindex info methods
+@item info methods
+@itemx info methods @var{regexp}
+The @code{info methods} command permits the user to examine all defined
+methods within C++ program, or (with the @var{regexp} argument) a
+specific set of methods found in the various C++ classes.  Many
+C++ classes provide a large number of methods.  Thus, the output
+from the @code{ptype} command can be overwhelming and hard to use.  The
+@code{info-methods} command filters the methods, printing only those
+which match the regular-expression @var{regexp}.
+@end ignore
+
+@ifclear HPPA
+@cindex reloading symbols
+Some systems allow individual object files that make up your program to
+be replaced without stopping and restarting your program.
+@ifset VXWORKS
+For example, in VxWorks you can simply recompile a defective object file
+and keep on running.
+@end ifset
+If you are running on one of these systems, you can allow @value{GDBN} to
+reload the symbols for automatically relinked modules:
+
+@table @code
+@kindex set symbol-reloading
+@item set symbol-reloading on
+Replace symbol definitions for the corresponding source file when an
+object file with a particular name is seen again.
+
+@item set symbol-reloading off
+Do not replace symbol definitions when re-encountering object files of
+the same name.  This is the default state; if you are not running on a
+system that permits automatically relinking modules, you should leave
+@code{symbol-reloading} off, since otherwise @value{GDBN} may discard symbols
+when linking large programs, that may contain several modules (from
+different directories or libraries) with the same name.
+
+@kindex show symbol-reloading
+@item show symbol-reloading
+Show the current @code{on} or @code{off} setting.
+@end table
+@end ifclear
+
+@ifset HPPA
+@kindex set opaque-type-resolution
+@item set opaque-type-resolution on
+Tell @value{GDBN} to resolve opaque types.  An opaque type is a type
+declared as a pointer to a @code{struct}, @code{class}, or
+@code{union}---for example, @code{struct MyType *}---that is used in one
+source file although the full declaration of @code{struct MyType} is in
+another source file.  The default is on.
+
+A change in the setting of this subcommand will not take effect until
+the next time symbols for a file are loaded.
+
+@item set opaque-type-resolution off
+Tell @value{GDBN} not to resolve opaque types.  In this case, the type
+is printed as follows:
+@smallexample
+@{<no data fields>@}
+@end smallexample
+
+@kindex show opaque-type-resolution
+@item show opaque-type-resolution
+Show whether opaque types are resolved or not.
+@end ifset
+
+@kindex maint print symbols
+@cindex symbol dump
+@kindex maint print psymbols
+@cindex partial symbol dump
+@item maint print symbols @var{filename}
+@itemx maint print psymbols @var{filename}
+@itemx maint print msymbols @var{filename}
+Write a dump of debugging symbol data into the file @var{filename}.
+These commands are used to debug the @value{GDBN} symbol-reading code.  Only
+symbols with debugging data are included.  If you use @samp{maint print
+symbols}, @value{GDBN} includes all the symbols for which it has already
+collected full details: that is, @var{filename} reflects symbols for
+only those files whose symbols @value{GDBN} has read.  You can use the
+command @code{info sources} to find out which files these are.  If you
+use @samp{maint print psymbols} instead, the dump shows information about
+symbols that @value{GDBN} only knows partially---that is, symbols defined in
+files that @value{GDBN} has skimmed, but not yet read completely.  Finally,
+@samp{maint print msymbols} dumps just the minimal symbol information
+required for each object file from which @value{GDBN} has read some symbols.
+@xref{Files, ,Commands to specify files}, for a discussion of how
+@value{GDBN} reads symbols (in the description of @code{symbol-file}).
+@end table
+
+@node Altering, GDB Files, Symbols, Top
+@chapter Altering Execution
+
+Once you think you have found an error in your program, you might want to
+find out for certain whether correcting the apparent error would lead to
+correct results in the rest of the run.  You can find the answer by
+experiment, using the @value{GDBN} features for altering execution of the
+program.
+
+For example, you can store new values into variables or memory
+locations,
+@ifclear BARETARGET
+give your program a signal, restart it
+@end ifclear
+@ifset BARETARGET
+restart your program
+@end ifset
+at a different address, or even return prematurely from a function.
+
+@menu
+* Assignment::                  Assignment to variables
+* Jumping::                     Continuing at a different address
+@ifclear BARETARGET
+* Signaling::                   Giving your program a signal
+@end ifclear
+
+* Returning::                   Returning from a function
+* Calling::                     Calling your program's functions
+* Patching::                    Patching your program
+@end menu
+
+@node Assignment, Jumping, Altering, Altering
+@section Assignment to variables
+
+@cindex assignment
+@cindex setting variables
+To alter the value of a variable, evaluate an assignment expression.
+@xref{Expressions, ,Expressions}.  For example,
+
+@example
+print x=4
+@end example
+
+@noindent
+stores the value 4 into the variable @code{x}, and then prints the
+value of the assignment expression (which is 4).  
+@ifclear CONLY
+@xref{Languages, ,Using @value{GDBN} with Different Languages}, for more
+information on operators in supported languages.
+@end ifclear
+
+@kindex set variable
+@cindex variables, setting
+If you are not interested in seeing the value of the assignment, use the
+@code{set} command instead of the @code{print} command.  @code{set} is
+really the same as @code{print} except that the expression's value is
+not printed and is not put in the value history (@pxref{Value History,
+,Value history}).  The expression is evaluated only for its effects.
+
+@ifclear HPPA
+If the beginning of the argument string of the @code{set} command
+appears identical to a @code{set} subcommand, use the @code{set
+variable} command instead of just @code{set}.  This command is identical
+to @code{set} except for its lack of subcommands.  For example, if your
+program has a variable @code{width}, you get an error if you try to set
+a new value with just @samp{set width=13}, because @value{GDBN} has the
+command @code{set width}:
+
+@example
+(@value{GDBP}) whatis width
+type = double
+(@value{GDBP}) p width
+$4 = 13
+(@value{GDBP}) set width=47
+Invalid syntax in expression.
+@end example
+
+@noindent
+The invalid expression, of course, is @samp{=47}.  In
+order to actually set the program's variable @code{width}, use
+
+@example
+(@value{GDBP}) set var width=47
+@end example
+@end ifclear
+@ifset HPPA
+Because the @code{set} command has many subcommands that can conflict
+with the names of program variables, it is a good idea to use the
+@code{set variable} command instead of just @code{set}.  For example, if
+your program has a variable @code{g}, you run into problems if you try
+to set a new value with just @samp{set g=4}, because @value{GDBN} has
+the command @code{set gnutarget}, abbreviated @code{set g}:
+
+@example
+@group
+(@value{GDBP}) whatis g
+type = double
+(@value{GDBP}) p g
+$1 = 1
+(@value{GDBP}) set g=4
+(gdb) p g
+$2 = 1
+(@value{GDBP}) r
+The program being debugged has been started already.
+Start it from the beginning? (y or n) y
+Starting program: /home/smith/cc_progs/a.out
+"/home/smith/cc_progs/a.out": can't open to read symbols: Invalid bfd target.
+(@value{GDBP}) show g
+The current BFD target is "=4".
+@end group
+@end example
+
+@noindent
+The program variable @code{g} did not change, and you silently set the
+@code{gnutarget} to an invalid value.  In order to set the variable
+@code{g}, use
+
+@example
+(@value{GDBP}) set var g=4
+@end example
+@end ifset
+
+@value{GDBN} allows more implicit conversions in assignments than C; you can
+freely store an integer value into a pointer variable or vice versa,
+and you can convert any structure to any other structure that is the
+same length or shorter.
+@comment FIXME: how do structs align/pad in these conversions?
+@comment        /doc@cygnus.com 18dec1990
+
+To store values into arbitrary places in memory, use the @samp{@{@dots{}@}}
+construct to generate a value of specified type at a specified address
+(@pxref{Expressions, ,Expressions}).  For example, @code{@{int@}0x83040} refers
+to memory location @code{0x83040} as an integer (which implies a certain size
+and representation in memory), and
+
+@example
+set @{int@}0x83040 = 4
+@end example
+
+@noindent
+stores the value 4 into that memory location.
+
+@node Jumping, Signaling, Assignment, Altering
+@section Continuing at a different address
+
+Ordinarily, when you continue your program, you do so at the place where
+it stopped, with the @code{continue} command.  You can instead continue at
+an address of your own choosing, with the following commands:
+
+@table @code
+@kindex jump
+@item jump @var{linespec}
+Resume execution at line @var{linespec}.  Execution stops again
+immediately if there is a breakpoint there.  @xref{List, ,Printing
+source lines}, for a description of the different forms of
+@var{linespec}.  It is common practice to use the @code{tbreak} command
+in conjunction with @code{jump}.  @xref{Set Breaks, ,Setting
+breakpoints}.
+
+The @code{jump} command does not change the current stack frame, or
+the stack pointer, or the contents of any memory location or any
+register other than the program counter.  If line @var{linespec} is in
+a different function from the one currently executing, the results may
+be bizarre if the two functions expect different patterns of arguments or
+of local variables.  For this reason, the @code{jump} command requests
+confirmation if the specified line is not in the function currently
+executing.  However, even bizarre results are predictable if you are
+well acquainted with the machine-language code of your program.
+
+@item jump *@var{address}
+Resume execution at the instruction at address @var{address}.
+@end table
+
+@ifclear HPPA
+@c Doesn't work on HP-UX; have to set $pcoqh and $pcoqt.
+You can get much the same effect as the @code{jump} command by storing a
+new value into the register @code{$pc}.  The difference is that this
+does not start your program running; it only changes the address of where it
+@emph{will} run when you continue.  For example,
+
+@example
+set $pc = 0x485
+@end example
+
+@noindent
+makes the next @code{continue} command or stepping command execute at
+address @code{0x485}, rather than at the address where your program stopped.
+@xref{Continuing and Stepping, ,Continuing and stepping}.
+@end ifclear
+
+The most common occasion to use the @code{jump} command is to back
+up---perhaps with more breakpoints set---over a portion of a program
+that has already executed, in order to examine its execution in more
+detail.
+
+@ifclear BARETARGET
+@c @group
+@node Signaling, Returning, Jumping, Altering
+@section Giving your program a signal
+
+@table @code
+@kindex signal
+@item signal @var{signal}
+Resume execution where your program stopped, but immediately give it the
+signal @var{signal}.  @var{signal} can be the name or the number of a
+signal.  For example, on many systems @code{signal 2} and @code{signal
+SIGINT} are both ways of sending an interrupt signal.
+
+Alternatively, if @var{signal} is zero, continue execution without
+giving a signal.  This is useful when your program stopped on account of
+a signal and would ordinary see the signal when resumed with the
+@code{continue} command; @samp{signal 0} causes it to resume without a
+signal.
+
+@code{signal} does not repeat when you press @key{RET} a second time
+after executing the command.
+@end table
+@c @end group
+
+Invoking the @code{signal} command is not the same as invoking the
+@code{kill} utility from the shell.  Sending a signal with @code{kill}
+causes @value{GDBN} to decide what to do with the signal depending on
+the signal handling tables (@pxref{Signals}).  The @code{signal} command
+passes the signal directly to your program.
+
+@end ifclear
+
+@node Returning, Calling, Signaling, Altering
+@section Returning from a function
+
+@table @code
+@cindex returning from a function
+@kindex return
+@item return
+@itemx return @var{expression}
+You can cancel execution of a function call with the @code{return}
+command.  If you give an
+@var{expression} argument, its value is used as the function's return
+value.
+@end table
+
+When you use @code{return}, @value{GDBN} discards the selected stack frame
+(and all frames within it).  You can think of this as making the
+discarded frame return prematurely.  If you wish to specify a value to
+be returned, give that value as the argument to @code{return}.
+
+This pops the selected stack frame (@pxref{Selection, ,Selecting a
+frame}), and any other frames inside of it, leaving its caller as the
+innermost remaining frame.  That frame becomes selected.  The
+specified value is stored in the registers used for returning values
+of functions.
+
+The @code{return} command does not resume execution; it leaves the
+program stopped in the state that would exist if the function had just
+returned.  In contrast, the @code{finish} command (@pxref{Continuing
+and Stepping, ,Continuing and stepping}) resumes execution until the
+selected stack frame returns naturally.
+
+@node Calling, Patching, Returning, Altering
+@section Calling program functions
+
+@cindex calling functions
+@kindex call
+@table @code
+@item call @var{expr}
+Evaluate the expression @var{expr} without displaying @code{void}
+returned values.
+@end table
+
+You can use this variant of the @code{print} command if you want to
+execute a function from your program, but without cluttering the output
+with @code{void} returned values.  If the result is not void, it 
+is printed and saved in the value history. 
+
+@ifclear HPPA
+For the A29K, a user-controlled variable @code{call_scratch_address},
+specifies the location of a scratch area to be used when @value{GDBN}
+calls a function in the target.  This is necessary because the usual
+method of putting the scratch area on the stack does not work in systems
+that have separate instruction and data spaces.
+@end ifclear
+
+@node Patching,  , Calling, Altering
+@section Patching programs
+@cindex patching binaries
+@cindex writing into executables
+@ifclear BARETARGET
+@cindex writing into corefiles
+@end ifclear
+
+By default, @value{GDBN} opens the file containing your program's executable
+code
+@ifclear BARETARGET
+(or the corefile)
+@end ifclear
+read-only.  This prevents accidental alterations
+to machine code; but it also prevents you from intentionally patching
+your program's binary.
+
+If you'd like to be able to patch the binary, you can specify that
+explicitly with the @code{set write} command.  For example, you might
+want to turn on internal debugging flags, or even to make emergency
+repairs.
+
+@table @code
+@kindex set write
+@item set write on
+@itemx set write off
+If you specify @samp{set write on}, @value{GDBN} opens executable 
+@ifclear BARETARGET
+and core
+@end ifclear
+files for both reading and writing; if you specify @samp{set write
+off} (the default), @value{GDBN} opens them read-only.
+
+If you have already loaded a file, you must load it again (using the
+@code{exec-file}
+@ifclear BARETARGET
+or @code{core-file}
+@end ifclear
+command) after changing @code{set write}, for your new setting to take
+effect.
+
+@item show write
+@kindex show write
+Display whether executable files 
+@ifclear BARETARGET
+and core files 
+@end ifclear
+are opened for writing as well as reading.
+@end table
+
+@node GDB Files, Targets, Altering, Top
+@chapter @value{GDBN} Files
+
+@value{GDBN} needs to know the file name of the program to be debugged, both in
+order to read its symbol table and in order to start your program.  
+@ifclear BARETARGET
+To debug a core dump of a previous run, you must also tell @value{GDBN}
+the name of the core dump file.
+@end ifclear
+
+@menu
+* Files::                       Commands to specify files
+* Symbol Errors::               Errors reading symbol files
+@end menu
+
+@node Files, Symbol Errors, GDB Files, GDB Files
+@section Commands to specify files
+@cindex symbol table
+
+@ifclear BARETARGET
+@cindex core dump file
+You may want to specify executable and core dump file names.
+The usual way to do this is at start-up time, using the arguments to 
+@value{GDBN}'s start-up commands (@pxref{Invocation, ,
+Getting In and Out of @value{GDBN}}).
+@end ifclear
+@ifset BARETARGET
+The usual way to specify an executable file name is with
+the command argument given when you start @value{GDBN}, (@pxref{Invocation,
+,Getting In and Out of @value{GDBN}}.
+@end ifset
+
+Occasionally it is necessary to change to a different file during a
+@value{GDBN} session.  Or you may run @value{GDBN} and forget to specify
+a file you want to use.  In these situations the @value{GDBN} commands
+to specify new files are useful.
+
+@table @code
+@cindex executable file
+@kindex file
+@item file @var{filename}
+Use @var{filename} as the program to be debugged.  It is read for its
+symbols and for the contents of pure memory.  It is also the program
+executed when you use the @code{run} command.  If you do not specify a
+directory and the file is not found in the @value{GDBN} working directory, 
+@value{GDBN} uses the environment variable @code{PATH} as a list of 
+directories to search, just as the shell does when looking for a program 
+to run.  You can change the value of this variable, for both @value{GDBN} 
+and your program, using the @code{path} command.
+
+@ifclear HPPA
+On systems with memory-mapped files, an auxiliary file
+@file{@var{filename}.syms} may hold symbol table information for
+@var{filename}.  If so, @value{GDBN} maps in the symbol table from
+@file{@var{filename}.syms}, starting up more quickly.  See the
+descriptions of the file options @samp{-mapped} and @samp{-readnow}
+(available on the command line, and with the commands @code{file},
+@code{symbol-file}, or @code{add-symbol-file}, described below), 
+for more information.
+@end ifclear
+
+@item file
+@code{file} with no argument makes @value{GDBN} discard any information it
+has on both executable file and the symbol table.
+
+@kindex exec-file
+@item exec-file @r{[} @var{filename} @r{]}
+Specify that the program to be run (but not the symbol table) is found
+in @var{filename}.  @value{GDBN} searches the environment variable @code{PATH}
+if necessary to locate your program.  Omitting @var{filename} means to
+discard information on the executable file.
+
+@kindex symbol-file
+@item symbol-file @r{[} @var{filename} @r{]}
+Read symbol table information from file @var{filename}.  @code{PATH} is
+searched when necessary.  Use the @code{file} command to get both symbol
+table and program to run from the same file.
+
+@code{symbol-file} with no argument clears out @value{GDBN} information on your
+program's symbol table.
+
+The @code{symbol-file} command causes @value{GDBN} to forget the contents 
+of its convenience variables, the value history, and all breakpoints and
+auto-display expressions.  This is because they may contain pointers to
+the internal data recording symbols and data types, which are part of
+the old symbol table data being discarded inside @value{GDBN}.
+
+@code{symbol-file} does not repeat if you press @key{RET} again after
+executing it once.
+
+When @value{GDBN} is configured for a particular environment, it
+understands debugging information in whatever format is the standard
+generated for that environment; you may use either a @sc{gnu} compiler, or
+other compilers that adhere to the local conventions.
+@ifclear HPPA
+Best results are usually obtained from @sc{gnu} compilers; for example,
+using @code{@value{GCC}} you can generate debugging information for
+optimized code.
+@end ifclear
+
+For most kinds of object files, with the exception of old SVR3 systems
+using COFF, the @code{symbol-file} command does not normally read the
+symbol table in full right away.  Instead, it scans the symbol table
+quickly to find which source files and which symbols are present.  The
+details are read later, one source file at a time, as they are needed.
+
+The purpose of this two-stage reading strategy is to make @value{GDBN}
+start up faster.  For the most part, it is invisible except for
+occasional pauses while the symbol table details for a particular source
+file are being read.  (The @code{set verbose} command can turn these
+pauses into messages if desired.  @xref{Messages/Warnings, ,Optional
+warnings and messages}.)
+
+@ifclear HPPA
+We have not implemented the two-stage strategy for COFF yet.  When the
+symbol table is stored in COFF format, @code{symbol-file} reads the
+symbol table data in full right away.  Note that ``stabs-in-COFF''
+still does the two-stage strategy, since the debug info is actually
+in stabs format.
+
+@kindex readnow
+@cindex reading symbols immediately
+@cindex symbols, reading immediately
+@kindex mapped
+@cindex memory-mapped symbol file
+@cindex saving symbol table
+@item symbol-file @var{filename} @r{[} -readnow @r{]} @r{[} -mapped @r{]}
+@itemx file @var{filename} @r{[} -readnow @r{]} @r{[} -mapped @r{]}
+You can override the @value{GDBN} two-stage strategy for reading symbol
+tables by using the @samp{-readnow} option with any of the commands that
+load symbol table information, if you want to be sure @value{GDBN} has the
+entire symbol table available.  
+@end ifclear
+
+@ifclear BARETARGET
+@ifclear HPPA
+If memory-mapped files are available on your system through the
+@code{mmap} system call, you can use another option, @samp{-mapped}, to
+cause @value{GDBN} to write the symbols for your program into a reusable
+file.  Future @value{GDBN} debugging sessions map in symbol information
+from this auxiliary symbol file (if the program has not changed), rather
+than spending time reading the symbol table from the executable
+program.  Using the @samp{-mapped} option has the same effect as
+starting @value{GDBN} with the @samp{-mapped} command-line option.
+
+You can use both options together, to make sure the auxiliary symbol
+file has all the symbol information for your program.
+
+The auxiliary symbol file for a program called @var{myprog} is called
+@samp{@var{myprog}.syms}.  Once this file exists (so long as it is newer
+than the corresponding executable), @value{GDBN} always attempts to use
+it when you debug @var{myprog}; no special options or commands are
+needed.
+
+The @file{.syms} file is specific to the host machine where you run
+@value{GDBN}.  It holds an exact image of the internal @value{GDBN}
+symbol table.  It cannot be shared across multiple host platforms.
+@end ifclear
+
+@c FIXME: for now no mention of directories, since this seems to be in
+@c flux.  13mar1992 status is that in theory GDB would look either in
+@c current dir or in same dir as myprog; but issues like competing
+@c GDB's, or clutter in system dirs, mean that in practice right now
+@c only current dir is used.  FFish says maybe a special GDB hierarchy
+@c (eg rooted in val of env var GDBSYMS) could exist for mappable symbol
+@c files.
+
+@kindex core
+@kindex core-file
+@item core-file @r{[} @var{filename} @r{]}
+Specify the whereabouts of a core dump file to be used as the ``contents
+of memory''.  Traditionally, core files contain only some parts of the
+address space of the process that generated them; @value{GDBN} can access the
+executable file itself for other parts.
+
+@code{core-file} with no argument specifies that no core file is
+to be used.
+
+Note that the core file is ignored when your program is actually running
+under @value{GDBN}.  So, if you have been running your program and you wish to
+debug a core file instead, you must kill the subprocess in which the
+program is running.  To do this, use the @code{kill} command
+(@pxref{Kill Process, ,Killing the child process}).
+@end ifclear
+
+@ifclear BARETARGET
+@ifclear HPPA
+@kindex add-symbol-file
+@cindex dynamic linking
+@item add-symbol-file @var{filename} @var{address}
+@itemx add-symbol-file @var{filename} @var{address} @r{[} -readnow @r{]} @r{[} -mapped @r{]}
+The @code{add-symbol-file} command reads additional symbol table information
+from the file @var{filename}.  You would use this command when @var{filename}
+has been dynamically loaded (by some other means) into the program that
+is running.  @var{address} should be the memory address at which the
+file has been loaded; @value{GDBN} cannot figure this out for itself.
+You can specify @var{address} as an expression.
+
+The symbol table of the file @var{filename} is added to the symbol table
+originally read with the @code{symbol-file} command.  You can use the
+@code{add-symbol-file} command any number of times; the new symbol data thus
+read keeps adding to the old.  To discard all old symbol data instead,
+use the @code{symbol-file} command.
+
+@code{add-symbol-file} does not repeat if you press @key{RET} after using it.
+
+You can use the @samp{-mapped} and @samp{-readnow} options just as with
+the @code{symbol-file} command, to change how @value{GDBN} manages the symbol
+table information for @var{filename}.
+
+@kindex add-shared-symbol-file
+@item add-shared-symbol-file
+The @code{add-shared-symbol-file} command can be used only under Harris' CXUX
+operating system for the Motorola 88k.  @value{GDBN} automatically looks for 
+shared libraries, however if @value{GDBN} does not find yours, you can run 
+@code{add-shared-symbol-file}.  It takes no arguments.
+@end ifclear
+@end ifclear
+
+@ifclear HPPA
+@kindex section
+@item section
+The @code{section} command changes the base address of section SECTION of 
+the exec file to ADDR.  This can be used if the exec file does not contain 
+section addresses, (such as in the a.out format), or when the addresses 
+specified in the file itself are wrong.  Each section must be changed 
+separately.  The ``info files'' command lists all the sections and their 
+addresses.
+@end ifclear
+
+@kindex info files
+@kindex info target
+@item info files
+@itemx info target
+@code{info files} and @code{info target} are synonymous; both print
+the current target (@pxref{Targets, ,Specifying a Debugging Target}),
+including the
+@ifclear BARETARGET
+names of the executable and core dump files
+@end ifclear
+@ifset BARETARGET
+name of the executable file
+@end ifset
+currently in use by @value{GDBN}, and the files from which symbols were
+loaded.  The command @code{help target} lists all possible targets
+rather than current ones.
+@end table
+
+All file-specifying commands allow both absolute and relative file names
+as arguments.  @value{GDBN} always converts the file name to an absolute file
+name and remembers it that way.
+
+@ifclear BARETARGET
+@cindex shared libraries
+@ifclear HPPA
+@c added HP-UX -- Kim (HP writer)
+@value{GDBN} supports HP-UX, SunOS, SVr4, Irix 5, and IBM RS/6000 shared
+libraries.
+@end ifclear
+@ifset HPPA
+@value{GDBN} supports HP-UX shared libraries.
+@end ifset
+@value{GDBN} automatically loads symbol definitions from shared libraries
+when you use the @code{run} command, or when you examine a core file.
+(Before you issue the @code{run} command, @value{GDBN} does not understand
+references to a function in a shared library, however---unless you are
+debugging a core file).
+@ifset HPPA
+If the program loads a library explicitly, @value{GDBN} automatically
+loads the symbols at the time of the @code{shl_load} call.
+@end ifset
+@c FIXME: some @value{GDBN} release may permit some refs to undef
+@c FIXME...symbols---eg in a break cmd---assuming they are from a shared
+@c FIXME...lib; check this from time to time when updating manual
+
+@table @code
+@kindex info sharedlibrary
+@kindex info share
+@item info share
+@itemx info sharedlibrary
+Print the names of the shared libraries which are currently loaded.
+
+@kindex sharedlibrary
+@kindex share
+@item sharedlibrary @var{regex}
+@itemx share @var{regex}
+
+Load shared object library symbols for files matching a
+Unix regular expression.
+As with files loaded automatically, it only loads shared libraries
+required by your program for a core file or after typing @code{run}.  If
+@var{regex} is omitted all shared libraries required by your program are
+loaded.
+@end table
+
+@ifset HPPA
+@value{GDBN} detects the loading of a shared library and automatically
+reads in symbols from the newly loaded library, up to a threshold that
+is initially set but that you can modify if you wish.
+
+Beyond that threshold, symbols from shared libraries must be explicitly
+loaded.  To load these symbols, use the command @code{sharedlibrary}
+@var{filename}.  The base address of the shared library is determined
+automatically by @value{GDBN} and need not be specified.
+
+To display or set the threshold, use the commands:
+
+@table @code
+@kindex set auto-solib-add
+@item set auto-solib-add @var{threshold}
+Set the autoloading size threshold, in megabytes.  If @var{threshold} is
+nonzero, symbols from all shared object libraries will be loaded
+automatically when the inferior begins execution or when the dynamic
+linker informs @value{GDBN} that a new library has been loaded, until
+the symbol table of the program and libraries exceeds this threshold.
+Otherwise, symbols must be loaded manually, using the
+@code{sharedlibrary} command.  The default threshold is 100 megabytes.
+
+@kindex show auto-solib-add
+@item show auto-solib-add
+Display the current autoloading size threshold, in megabytes.
+@end table
+@end ifset
+
+@end ifclear
+
+@node Symbol Errors,  , Files, GDB Files
+@section Errors reading symbol files
+
+While reading a symbol file, @value{GDBN} occasionally encounters problems,
+such as symbol types it does not recognize, or known bugs in compiler
+output.  By default, @value{GDBN} does not notify you of such problems, since
+they are relatively common and primarily of interest to people
+debugging compilers.  If you are interested in seeing information
+about ill-constructed symbol tables, you can either ask @value{GDBN} to print
+only one message about each such type of problem, no matter how many
+times the problem occurs; or you can ask @value{GDBN} to print more messages,
+to see how many times the problems occur, with the @code{set
+complaints} command (@pxref{Messages/Warnings, ,Optional warnings and
+messages}).
+
+The messages currently printed, and their meanings, include:
+
+@table @code
+@item inner block not inside outer block in @var{symbol}
+
+The symbol information shows where symbol scopes begin and end
+(such as at the start of a function or a block of statements).  This
+error indicates that an inner scope block is not fully contained
+in its outer scope blocks.
+
+@value{GDBN} circumvents the problem by treating the inner block as if it had
+the same scope as the outer block.  In the error message, @var{symbol}
+may be shown as ``@code{(don't know)}'' if the outer block is not a
+function.
+
+@item block at @var{address} out of order
+
+The symbol information for symbol scope blocks should occur in
+order of increasing addresses.  This error indicates that it does not
+do so.
+
+@value{GDBN} does not circumvent this problem, and has trouble
+locating symbols in the source file whose symbols it is reading.  (You
+can often determine what source file is affected by specifying
+@code{set verbose on}.  @xref{Messages/Warnings, ,Optional warnings and
+messages}.)
+
+@item bad block start address patched
+
+The symbol information for a symbol scope block has a start address
+smaller than the address of the preceding source line.  This is known
+to occur in the SunOS 4.1.1 (and earlier) C compiler.
+
+@value{GDBN} circumvents the problem by treating the symbol scope block as
+starting on the previous source line.
+
+@item bad string table offset in symbol @var{n}
+
+@cindex foo
+Symbol number @var{n} contains a pointer into the string table which is
+larger than the size of the string table.
+
+@value{GDBN} circumvents the problem by considering the symbol to have the
+name @code{foo}, which may cause other problems if many symbols end up
+with this name.
+
+@item unknown symbol type @code{0x@var{nn}}
+
+The symbol information contains new data types that @value{GDBN} does not yet
+know how to read.  @code{0x@var{nn}} is the symbol type of the misunderstood
+information, in hexadecimal.
+
+@value{GDBN} circumvents the error by ignoring this symbol information.  This
+usually allows you to debug your program, though certain symbols
+are not accessible.  If you encounter such a problem and feel like
+debugging it, you can debug @code{@value{GDBP}} with itself, breakpoint on
+@code{complain}, then go up to the function @code{read_dbx_symtab} and
+examine @code{*bufp} to see the symbol.
+
+@item stub type has NULL name
+@value{GDBN} could not find the full definition for
+@ifclear CONLY
+a struct or class.
+@end ifclear
+@ifset CONLY
+a struct.
+@end ifset
+
+@ifclear CONLY
+@item const/volatile indicator missing (ok if using g++ v1.x), got@dots{}
+
+The symbol information for a C++ member function is missing some
+information that recent versions of the compiler should have output
+for it.
+@end ifclear
+
+@item info mismatch between compiler and debugger
+
+@value{GDBN} could not parse a type specification output by the compiler.
+@end table
+
+@node Targets, Controlling GDB, GDB Files, Top
+@chapter Specifying a Debugging Target
+@cindex debugging target
+@kindex target
+
+A @dfn{target} is the execution environment occupied by your program.
+@ifclear HPPA
+@ifclear BARETARGET
+Often, @value{GDBN} runs in the same host environment as your program; in
+that case, the debugging target is specified as a side effect when you
+use the @code{file} or @code{core} commands.  When you need more
+flexibility---for example, running @value{GDBN} on a physically separate
+host, or controlling a standalone system over a serial port or a
+realtime system over a TCP/IP connection---you 
+@end ifclear
+@end ifclear
+@ifset HPPA
+On HP-UX systems, @value{GDBN} has been configured to support debugging
+of processes running on the PA-RISC architecture.  This means that the
+only possible targets are:
+
+@itemize @bullet
+@item
+An executable that has been compiled and linked to run on HP-UX
+
+@item
+A live HP-UX process, either started by @value{GDBN} (with the
+@code{run} command) or started outside of @value{GDBN} and attached to
+(with the @code{attach} command)
+
+@item
+A core file generated by an HP-UX process that previously aborted
+execution
+@end itemize
+
+@value{GDBN} on HP-UX has not been configured to support remote
+debugging, or to support programs running on other platforms. You
+@end ifset
+@ifset BARETARGET
+You
+@end ifset
+can use the @code{target} command to specify one of the target types
+configured for @value{GDBN} (@pxref{Target Commands, ,Commands for managing
+targets}).
+
+@menu
+* Active Targets::              Active targets
+* Target Commands::             Commands for managing targets
+@ifset REMOTESTUB
+* Byte Order::                  Choosing target byte order
+* Remote::                      Remote debugging
+@end ifset
+
+@end menu
+
+@node Active Targets, Target Commands, Targets, Targets
+@section Active targets
+@cindex stacking targets
+@cindex active targets
+@cindex multiple targets
+
+@ifclear BARETARGET
+There are three classes of targets: processes, core files, and
+executable files.  @value{GDBN} can work concurrently on up to three active
+targets, one in each class.  This allows you to (for example) start a
+process and inspect its activity without abandoning your work on a core
+file.
+
+For example, if you execute @samp{gdb a.out}, then the executable file
+@code{a.out} is the only active target.  If you designate a core file as
+well---presumably from a prior run that crashed and coredumped---then
+@value{GDBN} has two active targets and uses them in tandem, looking
+first in the corefile target, then in the executable file, to satisfy
+requests for memory addresses.  (Typically, these two classes of target
+are complementary, since core files contain only a program's
+read-write memory---variables and so on---plus machine status, while
+executable files contain only the program text and initialized data.)
+@end ifclear
+
+When you type @code{run}, your executable file becomes an active process
+target as well.  When a process target is active, all @value{GDBN} commands
+requesting memory addresses refer to that target; addresses in an 
+@ifclear BARETARGET
+active core file or 
+@end ifclear
+executable file target are obscured while the process
+target is active.
+
+@ifset BARETARGET
+Use the @code{exec-file} command to select a
+new executable target (@pxref{Files, ,Commands to specify
+files}).
+@end ifset
+@ifclear BARETARGET
+Use the @code{core-file} and @code{exec-file} commands to select a
+new core file or executable target (@pxref{Files, ,Commands to specify
+files}).  To specify as a target a process that is already running, use
+the @code{attach} command (@pxref{Attach, ,Debugging an
+already-running process}).
+@end ifclear
+
+@node Target Commands, Byte Order, Active Targets, Targets
+@section Commands for managing targets
+
+@table @code
+@item target @var{type} @var{parameters}
+Connects the @value{GDBN} host environment to a target
+@ifset BARETARGET
+machine.
+@end ifset
+@ifclear BARETARGET
+machine or process.  A target is typically a protocol for talking to
+debugging facilities.  You use the argument @var{type} to specify the
+type or protocol of the target machine.
+
+Further @var{parameters} are interpreted by the target protocol, but
+typically include things like device names or host names to connect
+with, process numbers, and baud rates.
+@end ifclear
+
+The @code{target} command does not repeat if you press @key{RET} again
+after executing the command.
+
+@kindex help target
+@item help target
+Displays the names of all targets available.  To display targets
+currently selected, use either @code{info target} or @code{info files}
+(@pxref{Files, ,Commands to specify files}).
+
+@item help target @var{name}
+Describe a particular target, including any parameters necessary to
+select it.
+
+@kindex set gnutarget
+@item set gnutarget @var{args}
+@value{GDBN} uses its own library BFD to read your files.  @value{GDBN} 
+knows whether it is reading an @dfn{executable},
+a @dfn{core}, or a @dfn{.o} file; however, you can specify the file format 
+with the @code{set gnutarget} command.  Unlike most @code{target} commands, 
+with @code{gnutarget} the @code{target} refers to a program, not a machine.
+
+@emph{Warning:} To specify a file format with @code{set gnutarget},
+you must know the actual BFD name.
+
+@noindent @xref{Files, , Commands to specify files}.
+
+@kindex show gnutarget  
+@item show gnutarget
+Use the @code{show gnutarget} command to display what file format
+@code{gnutarget} is set to read.  If you have not set @code{gnutarget},
+@value{GDBN} will determine the file format for each file automatically,
+and @code{show gnutarget} displays @samp{The current BDF target is "auto"}.
+@end table
+
+@ifclear HPPA
+Here are some common targets (available, or not, depending on the GDB
+configuration):
+@end ifclear
+@ifset HPPA
+These are the valid targets on HP-UX systems:
+@end ifset
+
+@table @code
+@kindex target exec
+@item target exec @var{program}
+An executable file.  @samp{target exec @var{program}} is the same as
+@samp{exec-file @var{program}}.
+
+@ifclear BARETARGET
+@kindex target core
+@item target core @var{filename}
+A core dump file.  @samp{target core @var{filename}} is the same as
+@samp{core-file @var{filename}}.
+@end ifclear
+
+@kindex target remote
+@item target remote @var{dev}
+Remote serial target in GDB-specific protocol.  The argument @var{dev}
+specifies what serial device to use for the connection (e.g.
+@file{/dev/ttya}). @xref{Remote, ,Remote debugging}.  @code{target remote}
+now supports the @code{load} command.  This is only useful if you have
+some other way of getting the stub to the target system, and you can put
+it somewhere in memory where it won't get clobbered by the download.
+
+@ifclear HPPA
+@kindex target sim
+@item target sim
+CPU simulator.  @xref{Simulator,,Simulated CPU Target}.
+@end ifclear
+@end table
+
+The following targets are all CPU-specific, and only available for
+specific configurations.
+@c should organize by CPU
+
+@table @code
+
+@kindex target abug
+@item target abug @var{dev}
+ABug ROM monitor for M68K.
+
+@kindex target adapt
+@item target adapt @var{dev}
+Adapt monitor for A29K.
+
+@kindex target amd-eb
+@item target amd-eb @var{dev} @var{speed} @var{PROG}
+@cindex AMD EB29K
+Remote PC-resident AMD EB29K board, attached over serial lines.
+@var{dev} is the serial device, as for @code{target remote};
+@var{speed} allows you to specify the linespeed; and @var{PROG} is the
+name of the program to be debugged, as it appears to DOS on the PC.
+@xref{EB29K Remote, ,The EBMON protocol for AMD29K}.
+
+@kindex target array
+@item target array @var{dev}
+Array Tech LSI33K RAID controller board.
+
+@kindex target bug
+@item target bug @var{dev}
+BUG monitor, running on a MVME187 (m88k) board.
+
+@kindex target cpu32bug
+@item target cpu32bug @var{dev}
+CPU32BUG monitor, running on a CPU32 (M68K) board.
+
+@kindex target dbug
+@item target dbug @var{dev}
+dBUG ROM monitor for Motorola ColdFire.
+
+@kindex target ddb
+@item target ddb @var{dev}
+NEC's DDB monitor for Mips Vr4300.
+
+@kindex target dink32
+@item target dink32 @var{dev}
+DINK32 ROM monitor for PowerPC.
+
+@kindex target e7000
+@item target e7000 @var{dev}
+E7000 emulator for Hitachi H8 and SH.
+
+@kindex target es1800
+@item target es1800 @var{dev}
+ES-1800 emulator for M68K.
+
+@kindex target est
+@item target est @var{dev}
+EST-300 ICE monitor, running on a CPU32 (M68K) board.
+
+@kindex target hms
+@item target hms @var{dev}
+A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host.
+@ifclear H8EXCLUSIVE
+Use special commands @code{device} and @code{speed} to control the serial
+line and the communications speed used.
+@xref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}.
+
+@kindex target lsi
+@item target lsi @var{dev}
+LSI ROM monitor for Mips.
+
+@kindex target m32r
+@item target m32r @var{dev}
+Mitsubishi M32R/D ROM monitor.
+
+@kindex target mips
+@item target mips @var{dev}
+IDT/SIM ROM monitor for Mips.
+
+@kindex target mon960
+@item target mon960 @var{dev}
+MON960 monitor for Intel i960.
+
+@kindex target nindy
+@item target nindy @var{devicename}
+An Intel 960 board controlled by a Nindy Monitor.  @var{devicename} is
+the name of the serial device to use for the connection, e.g.
+@file{/dev/ttya}.  @xref{i960-Nindy Remote, ,@value{GDBN} with a remote i960 (Nindy)}.
+
+@kindex target nrom
+@item target nrom @var{dev}
+NetROM ROM emulator.  This target only supports downloading.
+
+@kindex target op50n
+@item target op50n @var{dev}
+OP50N monitor, running on an OKI HPPA board.
+
+@kindex target pmon
+@item target pmon @var{dev}
+PMON ROM monitor for Mips.
+
+@kindex target ppcbug
+@item target ppcbug @var{dev}
+@kindex target ppcbug1
+@item target ppcbug1 @var{dev}
+PPCBUG ROM monitor for PowerPC.
+
+@kindex target r3900
+@item target r3900 @var{dev}
+Densan DVE-R3900 ROM monitor for Toshiba R3900 Mips.
+
+@kindex target rdi
+@item target rdi @var{dev}
+ARM Angel monitor, via RDI library interface.
+ 
+@kindex target rdp
+@item target rdp @var{dev}
+ARM Demon monitor.
+
+@kindex target rom68k
+@item target rom68k @var{dev}
+ROM 68K monitor, running on an M68K IDP board.
+
+@kindex target rombug
+@item target rombug @var{dev}
+ROMBUG ROM monitor for OS/9000.
+
+@kindex target sds
+@item target sds @var{dev}
+SDS monitor, running on a PowerPC board (such as Motorola's ADS).
+
+@kindex target sparclite
+@item target sparclite @var{dev}
+Fujitsu sparclite boards, used only for the purpose of loading.  
+You must use an additional command to debug the program. 
+For example: target remote @var{dev} using @value{GDBN} standard 
+remote protocol.
+
+@kindex target sh3
+@kindex target sh3e
+@item target sh3 @var{dev}
+@item target sh3e @var{dev}
+Hitachi SH-3 and SH-3E target systems.
+
+@kindex target st2000
+@item target st2000 @var{dev} @var{speed}
+A Tandem ST2000 phone switch, running Tandem's STDBUG protocol.  @var{dev}
+is the name of the device attached to the ST2000 serial line;
+@var{speed} is the communication line speed.  The arguments are not used
+if @value{GDBN} is configured to connect to the ST2000 using TCP or Telnet.
+@xref{ST2000 Remote,,@value{GDBN} with a Tandem ST2000}.
+
+@kindex target udi
+@item target udi @var{keyword}
+Remote AMD29K target, using the AMD UDI protocol.  The @var{keyword}
+argument specifies which 29K board or simulator to use.  @xref{UDI29K
+Remote,,The UDI protocol for AMD29K}.
+
+@kindex target vxworks
+@item target vxworks @var{machinename}
+A VxWorks system, attached via TCP/IP.  The argument @var{machinename}
+is the target system's machine name or IP address.
+@xref{VxWorks Remote, ,@value{GDBN} and VxWorks}.
+
+@kindex target w89k
+@item target w89k @var{dev}
+W89K monitor, running on a Winbond HPPA board.
+
+@end ifclear
+@end table
+
+@ifset GENERIC
+Different targets are available on different configurations of @value{GDBN}; 
+your configuration may have more or fewer targets.
+@end ifset
+
+Many remote targets require you to download the executable's code
+once you've successfully established a connection.
+
+@table @code
+
+@kindex load @var{filename}
+@item load @var{filename}
+@ifset GENERIC
+Depending on what remote debugging facilities are configured into
+@value{GDBN}, the @code{load} command may be available.  Where it exists, it
+is meant to make @var{filename} (an executable) available for debugging
+on the remote system---by downloading, or dynamic linking, for example.
+@code{load} also records the @var{filename} symbol table in @value{GDBN}, like
+the @code{add-symbol-file} command.
+
+If your @value{GDBN} does not have a @code{load} command, attempting to
+execute it gets the error message ``@code{You can't do that when your
+target is @dots{}}''
+@end ifset
+
+The file is loaded at whatever address is specified in the executable.
+For some object file formats, you can specify the load address when you
+link the program; for other formats, like a.out, the object file format
+specifies a fixed address.
+@c FIXME! This would be a good place for an xref to the GNU linker doc.
+
+@ifset VXWORKS
+On VxWorks, @code{load} links @var{filename} dynamically on the
+current target system as well as adding its symbols in @value{GDBN}.
+@end ifset
+
+@ifset I960
+@cindex download to Nindy-960
+With the Nindy interface to an Intel 960 board, @code{load}
+downloads @var{filename} to the 960 as well as adding its symbols in
+@value{GDBN}.
+@end ifset
+
+@ifset H8
+@cindex download to H8/300 or H8/500
+@cindex H8/300 or H8/500 download
+@cindex download to Hitachi SH
+@cindex Hitachi SH download
+When you select remote debugging to a Hitachi SH, H8/300, or H8/500 board
+(@pxref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}),
+the @code{load} command downloads your program to the Hitachi board and also
+opens it as the current executable target for @value{GDBN} on your host
+(like the @code{file} command).
+@end ifset
+
+@code{load} does not repeat if you press @key{RET} again after using it.
+@end table
+
+@ifset REMOTESTUB
+@node Byte Order, Remote, Target Commands, Targets
+@section Choosing target byte order
+@cindex choosing target byte order
+@cindex target byte order
+@kindex set endian big
+@kindex set endian little
+@kindex set endian auto
+@kindex show endian
+
+Some types of processors, such as the MIPS, PowerPC, and Hitachi SH,
+offer the ability to run either big-endian or little-endian byte
+orders.  Usually the executable or symbol will include a bit to
+designate the endian-ness, and you will not need to worry about
+which to use.  However, you may still find it useful to adjust
+GDB's idea of processor endian-ness manually.
+
+@table @code
+@kindex set endian big
+@item set endian big
+Instruct @value{GDBN} to assume the target is big-endian.
+
+@kindex set endian little
+@item set endian little
+Instruct @value{GDBN} to assume the target is little-endian.
+
+@kindex set endian auto
+@item set endian auto
+Instruct @value{GDBN} to use the byte order associated with the
+executable.
+
+@item show endian
+Display @value{GDBN}'s current idea of the target byte order.
+
+@end table
+
+Note that these commands merely adjust interpretation of symbolic
+data on the host, and that they have absolutely no effect on the
+target system.
+
+@node Remote,  , Byte Order, Targets
+@section Remote debugging
+@cindex remote debugging
+
+If you are trying to debug a program running on a machine that cannot run
+@value{GDBN} in the usual way, it is often useful to use remote debugging.  
+For example, you might use remote debugging on an operating system kernel, 
+or on a small system which does not have a general purpose operating system
+powerful enough to run a full-featured debugger.
+
+Some configurations of @value{GDBN} have special serial or TCP/IP interfaces
+to make this work with particular debugging targets.  In addition,
+@value{GDBN} comes with a generic serial protocol (specific to @value{GDBN}, 
+but not specific to any particular target system) which you can use if you
+write the remote stubs---the code that runs on the remote system to
+communicate with @value{GDBN}.
+
+Other remote targets may be available in your
+configuration of @value{GDBN}; use @code{help target} to list them.
+@end ifset
+
+@ifset GENERIC
+@c Text on starting up GDB in various specific cases; it goes up front
+@c in manuals configured for any of those particular situations, here
+@c otherwise.
+@menu
+@ifset REMOTESTUB
+* Remote Serial::               @value{GDBN} remote serial protocol
+@end ifset
+@ifset I960
+* i960-Nindy Remote::		@value{GDBN} with a remote i960 (Nindy)
+@end ifset
+@ifset AMD29K
+* UDI29K Remote::               The UDI protocol for AMD29K
+* EB29K Remote::		The EBMON protocol for AMD29K
+@end ifset
+@ifset VXWORKS
+* VxWorks Remote::		@value{GDBN} and VxWorks
+@end ifset
+@ifset ST2000
+* ST2000 Remote::               @value{GDBN} with a Tandem ST2000
+@end ifset
+@ifset H8
+* Hitachi Remote::              @value{GDBN} and Hitachi Microprocessors
+@end ifset
+@ifset MIPS
+* MIPS Remote::			@value{GDBN} and MIPS boards
+@end ifset
+@ifset SPARCLET
+* Sparclet Remote::             @value{GDBN} and Sparclet boards
+@end ifset
+@ifset SIMS
+* Simulator::                   Simulated CPU target
+@end ifset
+@end menu
+
+@include remote.texi
+@end ifset
+
+@node Controlling GDB
+@chapter Controlling @value{GDBN}
+
+You can alter the way @value{GDBN} interacts with you by using
+the @code{set} command.  For commands controlling how @value{GDBN} displays
+data, @pxref{Print Settings, ,Print settings}; other settings are described 
+here.
+
+@menu
+* Prompt::                      Prompt
+* Editing::                     Command editing
+* History::                     Command history
+* Screen Size::                 Screen size
+* Numbers::                     Numbers
+* Messages/Warnings::           Optional warnings and messages
+@end menu
+
+@node Prompt, Editing, Controlling GDB, Controlling GDB
+@section Prompt
+
+@cindex prompt
+
+@value{GDBN} indicates its readiness to read a command by printing a string
+called the @dfn{prompt}.  This string is normally @samp{(@value{GDBP})}.  You
+can change the prompt string with the @code{set prompt} command.  For
+instance, when debugging @value{GDBN} with @value{GDBN}, it is useful to change
+the prompt in one of the @value{GDBN} sessions so that you can always tell 
+which one you are talking to.
+
+@emph{Note:}  @code{set prompt} no longer adds a space for you after the
+prompt you set.  This allows you to set a prompt which ends in a space
+or a prompt that does not.
+
+@table @code
+@kindex set prompt
+@item set prompt @var{newprompt}
+Directs @value{GDBN} to use @var{newprompt} as its prompt string henceforth.
+
+@kindex show prompt
+@item show prompt
+Prints a line of the form: @samp{Gdb's prompt is: @var{your-prompt}}
+@end table
+
+@node Editing, History, Prompt, Controlling GDB
+@section Command editing
+@cindex readline
+@cindex command line editing
+
+@value{GDBN} reads its input commands via the @dfn{readline} interface.  This
+@sc{gnu} library provides consistent behavior for programs which provide a
+command line interface to the user.  Advantages are @sc{gnu} Emacs-style
+or @dfn{vi}-style inline editing of commands, @code{csh}-like history
+substitution, and a storage and recall of command history across
+debugging sessions.
+
+You may control the behavior of command line editing in @value{GDBN} with the
+command @code{set}.
+
+@table @code
+@kindex set editing
+@cindex editing
+@item set editing
+@itemx set editing on
+Enable command line editing (enabled by default).
+
+@item set editing off
+Disable command line editing.
+
+@kindex show editing
+@item show editing
+Show whether command line editing is enabled.
+@end table
+
+@node History, Screen Size, Editing, Controlling GDB
+@section Command history
+
+@value{GDBN} can keep track of the commands you type during your
+debugging sessions, so that you can be certain of precisely what
+happened.  Use these commands to manage the @value{GDBN} command
+history facility.
+
+@table @code
+@cindex history substitution
+@cindex history file
+@kindex set history filename
+@kindex GDBHISTFILE
+@item set history filename @var{fname}
+Set the name of the @value{GDBN} command history file to @var{fname}.
+This is the file where @value{GDBN} reads an initial command history
+list, and where it writes the command history from this session when it
+exits.  You can access this list through history expansion or through
+the history command editing characters listed below.  This file defaults
+to the value of the environment variable @code{GDBHISTFILE}, or to
+@file{./.gdb_history} if this variable is not set.
+
+@cindex history save
+@kindex set history save
+@item set history save
+@itemx set history save on
+Record command history in a file, whose name may be specified with the
+@code{set history filename} command.  By default, this option is disabled.
+
+@item set history save off
+Stop recording command history in a file.
+
+@cindex history size
+@kindex set history size
+@item set history size @var{size}
+Set the number of commands which @value{GDBN} keeps in its history list.
+This defaults to the value of the environment variable
+@code{HISTSIZE}, or to 256 if this variable is not set.
+@end table
+
+@cindex history expansion
+History expansion assigns special meaning to the character @kbd{!}.
+@ifset have-readline-appendices
+@xref{Event Designators}.
+@end ifset
+
+Since @kbd{!} is also the logical not operator in C, history expansion
+is off by default. If you decide to enable history expansion with the
+@code{set history expansion on} command, you may sometimes need to
+follow @kbd{!} (when it is used as logical not, in an expression) with
+a space or a tab to prevent it from being expanded.  The readline
+history facilities do not attempt substitution on the strings
+@kbd{!=} and @kbd{!(}, even when history expansion is enabled.
+
+The commands to control history expansion are:
+
+@table @code
+@kindex set history expansion
+@item set history expansion on
+@itemx set history expansion
+Enable history expansion.  History expansion is off by default.
+
+@item set history expansion off
+Disable history expansion.
+
+The readline code comes with more complete documentation of
+editing and history expansion features.  Users unfamiliar with @sc{gnu} Emacs
+or @code{vi} may wish to read it.
+@ifset have-readline-appendices
+@xref{Command Line Editing}.
+@end ifset
+
+@c @group
+@kindex show history
+@item show history
+@itemx show history filename
+@itemx show history save
+@itemx show history size
+@itemx show history expansion
+These commands display the state of the @value{GDBN} history parameters.
+@code{show history} by itself displays all four states.
+@c @end group
+@end table
+
+@table @code
+@kindex show commands
+@item show commands
+Display the last ten commands in the command history.
+
+@item show commands @var{n}
+Print ten commands centered on command number @var{n}.
+
+@item show commands +
+Print ten commands just after the commands last printed.
+@end table
+
+@node Screen Size, Numbers, History, Controlling GDB
+@section Screen size
+@cindex size of screen
+@cindex pauses in output
+
+Certain commands to @value{GDBN} may produce large amounts of
+information output to the screen.  To help you read all of it,
+@value{GDBN} pauses and asks you for input at the end of each page of
+output.  Type @key{RET} when you want to continue the output, or @kbd{q}
+to discard the remaining output.  Also, the screen width setting
+determines when to wrap lines of output.  Depending on what is being
+printed, @value{GDBN} tries to break the line at a readable place,
+rather than simply letting it overflow onto the following line.
+
+Normally @value{GDBN} knows the size of the screen from the termcap data base
+together with the value of the @code{TERM} environment variable and the
+@code{stty rows} and @code{stty cols} settings. If this is not correct,
+you can override it with the @code{set height} and @code{set
+width} commands:
+
+@table @code
+@kindex set height
+@kindex set width
+@kindex show width
+@kindex show height
+@item set height @var{lpp}
+@itemx show height
+@itemx set width @var{cpl}
+@itemx show width
+These @code{set} commands specify a screen height of @var{lpp} lines and
+a screen width of @var{cpl} characters.  The associated @code{show}
+commands display the current settings.
+
+If you specify a height of zero lines, @value{GDBN} does not pause during 
+output no matter how long the output is.  This is useful if output is to a 
+file or to an editor buffer.
+
+Likewise, you can specify @samp{set width 0} to prevent @value{GDBN}
+from wrapping its output.
+@end table
+
+@node Numbers, Messages/Warnings, Screen Size, Controlling GDB
+@section Numbers
+@cindex number representation
+@cindex entering numbers
+
+You can always enter numbers in octal, decimal, or hexadecimal in @value{GDBN} by
+the usual conventions: octal numbers begin with @samp{0}, decimal
+numbers end with @samp{.}, and hexadecimal numbers begin with @samp{0x}.
+Numbers that begin with none of these are, by default, entered in base
+10; likewise, the default display for numbers---when no particular
+format is specified---is base 10.  You can change the default base for
+both input and output with the @code{set radix} command.
+
+@table @code
+@kindex set input-radix
+@item set input-radix @var{base}
+Set the default base for numeric input.  Supported choices
+for @var{base} are decimal 8, 10, or 16.  @var{base} must itself be
+specified either unambiguously or using the current default radix; for
+example, any of
+
+@smallexample
+set radix 012
+set radix 10.
+set radix 0xa
+@end smallexample
+
+@noindent
+sets the base to decimal.  On the other hand, @samp{set radix 10}
+leaves the radix unchanged no matter what it was.
+
+@kindex set output-radix
+@item set output-radix @var{base}
+Set the default base for numeric display.  Supported choices
+for @var{base} are decimal 8, 10, or 16.  @var{base} must itself be
+specified either unambiguously or using the current default radix.
+
+@kindex show input-radix
+@item show input-radix
+Display the current default base for numeric input.
+
+@kindex show output-radix
+@item show output-radix
+Display the current default base for numeric display.
+@end table
+
+@node Messages/Warnings,  , Numbers, Controlling GDB
+@section Optional warnings and messages
+
+By default, @value{GDBN} is silent about its inner workings.  If you are running
+on a slow machine, you may want to use the @code{set verbose} command.
+This makes @value{GDBN} tell you when it does a lengthy internal operation, so
+you will not think it has crashed.
+
+Currently, the messages controlled by @code{set verbose} are those
+which announce that the symbol table for a source file is being read;
+see @code{symbol-file} in @ref{Files, ,Commands to specify files}.
+
+@table @code
+@kindex set verbose
+@item set verbose on
+Enables @value{GDBN} output of certain informational messages.
+
+@item set verbose off
+Disables @value{GDBN} output of certain informational messages.
+
+@kindex show verbose
+@item show verbose
+Displays whether @code{set verbose} is on or off.
+@end table
+
+By default, if @value{GDBN} encounters bugs in the symbol table of an object
+file, it is silent; but if you are debugging a compiler, you may find
+this information useful (@pxref{Symbol Errors, ,Errors reading symbol files}).
+
+@table @code
+@kindex set complaints
+@item set complaints @var{limit}
+Permits @value{GDBN} to output @var{limit} complaints about each type of unusual
+symbols before becoming silent about the problem.  Set @var{limit} to
+zero to suppress all complaints; set it to a large number to prevent
+complaints from being suppressed.
+
+@kindex show complaints
+@item show complaints
+Displays how many symbol complaints @value{GDBN} is permitted to produce.
+@end table
+
+By default, @value{GDBN} is cautious, and asks what sometimes seems to be a
+lot of stupid questions to confirm certain commands.  For example, if
+you try to run a program which is already running:
+
+@example
+(@value{GDBP}) run
+The program being debugged has been started already.
+Start it from the beginning? (y or n)
+@end example
+
+If you are willing to unflinchingly face the consequences of your own
+commands, you can disable this ``feature'':
+
+@table @code
+@kindex set confirm
+@cindex flinching
+@cindex confirmation
+@cindex stupid questions
+@item set confirm off
+Disables confirmation requests.
+
+@item set confirm on
+Enables confirmation requests (the default).
+
+@kindex show confirm
+@item show confirm
+Displays state of confirmation requests.
+@end table
+
+@node Sequences, Emacs, Controlling GDB, Top
+@chapter Canned Sequences of Commands
+
+Aside from breakpoint commands (@pxref{Break Commands, ,Breakpoint
+command lists}), @value{GDBN} provides two ways to store sequences of commands
+for execution as a unit: user-defined commands and command files.
+
+@menu
+* Define::                      User-defined commands
+* Hooks::                       User-defined command hooks
+* Command Files::               Command files
+* Output::                      Commands for controlled output
+@end menu
+
+@node Define, Hooks, Sequences, Sequences
+@section User-defined commands
+
+@cindex user-defined command
+A @dfn{user-defined command} is a sequence of @value{GDBN} commands to which 
+you assign a new name as a command.  This is done with the @code{define}
+command.  User commands may accept up to 10 arguments separated by whitespace.
+Arguments are accessed within the user command via @var{$arg0@dots{}$arg9}.
+A trivial example:
+
+@smallexample
+define adder
+  print $arg0 + $arg1 + $arg2
+@end smallexample
+
+@noindent To execute the command use:
+
+@smallexample
+adder 1 2 3
+@end smallexample
+
+@noindent This defines the command @code{adder}, which prints the sum of
+its three arguments.  Note the arguments are text substitutions, so they may 
+reference variables, use complex expressions, or even perform inferior
+functions calls.
+
+@table @code
+@kindex define
+@item define @var{commandname}
+Define a command named @var{commandname}.  If there is already a command
+by that name, you are asked to confirm that you want to redefine it.
+
+The definition of the command is made up of other @value{GDBN} command lines,
+which are given following the @code{define} command.  The end of these
+commands is marked by a line containing @code{end}.
+
+@kindex if
+@kindex else
+@item if
+Takes a single argument, which is an expression to evaluate.
+It is followed by a series of commands that are executed
+only if the expression is true (nonzero).
+There can then optionally be a line @code{else}, followed
+by a series of commands that are only executed if the expression
+was false.  The end of the list is marked by a line containing @code{end}.
+
+@kindex while
+@item while
+The syntax is similar to @code{if}: the command takes a single argument,
+which is an expression to evaluate, and must be followed by the commands to
+execute, one per line, terminated by an @code{end}.
+The commands are executed repeatedly as long as the expression
+evaluates to true.
+
+@kindex document
+@item document @var{commandname}
+Document the user-defined command @var{commandname}, so that it can be
+accessed by @code{help}.  The command @var{commandname} must already be 
+defined.  This command reads lines of documentation just as @code{define} 
+reads the lines of the command definition, ending with @code{end}.  
+After the @code{document} command is finished, @code{help} on command 
+@var{commandname} displays the documentation you have written.
+
+You may use the @code{document} command again to change the
+documentation of a command.  Redefining the command with @code{define}
+does not change the documentation.
+
+@kindex help user-defined
+@item help user-defined
+List all user-defined commands, with the first line of the documentation
+(if any) for each.
+
+@kindex show user
+@item show user
+@itemx show user @var{commandname}
+Display the @value{GDBN} commands used to define @var{commandname} (but not its
+documentation).  If no @var{commandname} is given, display the
+definitions for all user-defined commands.
+@end table
+
+When user-defined commands are executed, the
+commands of the definition are not printed.  An error in any command
+stops execution of the user-defined command.
+
+If used interactively, commands that would ask for confirmation proceed
+without asking when used inside a user-defined command.  Many @value{GDBN} 
+commands that normally print messages to say what they are doing omit the 
+messages when used in a user-defined command.
+
+@node Hooks, Command Files, Define, Sequences
+@section User-defined command hooks
+@cindex command files
+
+You may define @emph{hooks}, which are a special kind of user-defined
+command.  Whenever you run the command @samp{foo}, if the user-defined
+command @samp{hook-foo} exists, it is executed (with no arguments)
+before that command.
+
+In addition, a pseudo-command, @samp{stop} exists.  Defining
+(@samp{hook-stop}) makes the associated commands execute every time
+execution stops in your program: before breakpoint commands are run,
+displays are printed, or the stack frame is printed.
+
+@ifclear BARETARGET
+For example, to ignore @code{SIGALRM} signals while
+single-stepping, but treat them normally during normal execution,
+you could define:
+
+@example
+define hook-stop
+handle SIGALRM nopass
+end
+
+define hook-run
+handle SIGALRM pass
+end
+
+define hook-continue
+handle SIGLARM pass
+end
+@end example
+@end ifclear
+
+You can define a hook for any single-word command in @value{GDBN}, but
+not for command aliases; you should define a hook for the basic command
+name, e.g.  @code{backtrace} rather than @code{bt}.
+@c FIXME!  So how does Joe User discover whether a command is an alias
+@c or not?
+If an error occurs during the execution of your hook, execution of
+@value{GDBN} commands stops and @value{GDBN} issues a prompt
+(before the command that you actually typed had a chance to run).
+
+If you try to define a hook which does not match any known command, you
+get a warning from the @code{define} command.
+
+@node Command Files, Output, Hooks, Sequences
+@section Command files
+
+@cindex command files
+A command file for @value{GDBN} is a file of lines that are @value{GDBN} 
+commands.  Comments (lines starting with @kbd{#}) may also be included.  
+An empty line in a command file does nothing; it does not mean to repeat 
+the last command, as it would from the terminal.
+
+@cindex init file
+@cindex @file{.gdbinit}
+When you start @value{GDBN}, it automatically executes commands from its
+@dfn{init files}.  These are files named @file{.gdbinit} on Unix, or
+@file{gdb.ini} on DOS/Windows.  @value{GDBN} reads the init file (if
+any) in your home directory, then processes command line options and
+operands, and then reads the init file (if any) in the current working
+directory.  This is so the init file in your home directory can set
+options (such as @code{set complaints}) which affect the processing of
+the command line options and operands.  The init files are not executed
+if you use the @samp{-nx} option; @pxref{Mode Options, ,Choosing modes}.
+
+@ifset GENERIC
+@cindex init file name
+On some configurations of @value{GDBN}, the init file is known by a
+different name (these are typically environments where a specialized
+form of @value{GDBN} may need to coexist with other forms, hence a
+different name for the specialized version's init file).  These are the
+environments with special init file names:
+
+@kindex .vxgdbinit
+@itemize @bullet
+@item
+VxWorks (Wind River Systems real-time OS): @samp{.vxgdbinit}
+
+@kindex .os68gdbinit
+@item
+OS68K (Enea Data Systems real-time OS): @samp{.os68gdbinit}
+
+@kindex .esgdbinit
+@item
+ES-1800 (Ericsson Telecom AB M68000 emulator): @samp{.esgdbinit}
+@end itemize
+@end ifset
+
+You can also request the execution of a command file with the
+@code{source} command:
+
+@table @code
+@kindex source
+@item source @var{filename}
+Execute the command file @var{filename}.
+@end table
+
+The lines in a command file are executed sequentially.  They are not
+printed as they are executed.  An error in any command terminates execution
+of the command file.
+
+Commands that would ask for confirmation if used interactively proceed
+without asking when used in a command file.  Many @value{GDBN} commands that
+normally print messages to say what they are doing omit the messages
+when called from command files.
+
+@node Output,  , Command Files, Sequences
+@section Commands for controlled output
+
+During the execution of a command file or a user-defined command, normal
+@value{GDBN} output is suppressed; the only output that appears is what is
+explicitly printed by the commands in the definition.  This section
+describes three commands useful for generating exactly the output you
+want.
+
+@table @code
+@kindex echo
+@item echo @var{text}
+@c I do not consider backslash-space a standard C escape sequence
+@c because it is not in ANSI.
+Print @var{text}.  Nonprinting characters can be included in
+@var{text} using C escape sequences, such as @samp{\n} to print a
+newline.  @strong{No newline is printed unless you specify one.}
+In addition to the standard C escape sequences, a backslash followed
+by a space stands for a space.  This is useful for displaying a
+string with spaces at the beginning or the end, since leading and
+trailing spaces are otherwise trimmed from all arguments.  
+To print @samp{@w{ }and foo =@w{ }}, use the command
+@samp{echo \@w{ }and foo = \@w{ }}.
+
+A backslash at the end of @var{text} can be used, as in C, to continue
+the command onto subsequent lines.  For example,
+
+@example
+echo This is some text\n\
+which is continued\n\
+onto several lines.\n
+@end example
+
+produces the same output as
+
+@example
+echo This is some text\n
+echo which is continued\n
+echo onto several lines.\n
+@end example
+
+@kindex output
+@item output @var{expression}
+Print the value of @var{expression} and nothing but that value: no
+newlines, no @samp{$@var{nn} = }.  The value is not entered in the
+value history either.  @xref{Expressions, ,Expressions}, for more information 
+on expressions.
+
+@item output/@var{fmt} @var{expression}
+Print the value of @var{expression} in format @var{fmt}.  You can use
+the same formats as for @code{print}.  @xref{Output Formats,,Output
+formats}, for more information.
+
+@kindex printf
+@item printf @var{string}, @var{expressions}@dots{}
+Print the values of the @var{expressions} under the control of
+@var{string}.  The @var{expressions} are separated by commas and may be
+either numbers or pointers.  Their values are printed as specified by
+@var{string}, exactly as if your program were to execute the C
+subroutine
+
+@example
+printf (@var{string}, @var{expressions}@dots{});
+@end example
+
+For example, you can print two values in hex like this:
+
+@smallexample
+printf "foo, bar-foo = 0x%x, 0x%x\n", foo, bar-foo
+@end smallexample
+
+The only backslash-escape sequences that you can use in the format
+string are the simple ones that consist of backslash followed by a
+letter.
+@end table
+
+@ifclear DOSHOST
+@node Emacs, GDB Bugs, Sequences, Top
+@chapter Using @value{GDBN} under @sc{gnu} Emacs
+
+@cindex Emacs
+@cindex @sc{gnu} Emacs
+A special interface allows you to use @sc{gnu} Emacs to view (and
+edit) the source files for the program you are debugging with
+@value{GDBN}.
+
+To use this interface, use the command @kbd{M-x gdb} in Emacs.  Give the
+executable file you want to debug as an argument.  This command starts
+@value{GDBN} as a subprocess of Emacs, with input and output through a newly
+created Emacs buffer.
+@ifset HPPA
+(Do not use the @code{-tui} option to run @value{GDBN} from Emacs.)
+@end ifset
+
+Using @value{GDBN} under Emacs is just like using @value{GDBN} normally except for two
+things:
+
+@itemize @bullet
+@item
+All ``terminal'' input and output goes through the Emacs buffer.
+@end itemize
+
+This applies both to @value{GDBN} commands and their output, and to the input
+and output done by the program you are debugging.
+
+This is useful because it means that you can copy the text of previous
+commands and input them again; you can even use parts of the output
+in this way.
+
+All the facilities of Emacs' Shell mode are available for interacting
+with your program.  In particular, you can send signals the usual
+way---for example, @kbd{C-c C-c} for an interrupt, @kbd{C-c C-z} for a
+stop.
+
+@itemize @bullet
+@item
+@value{GDBN} displays source code through Emacs.
+@end itemize
+
+Each time @value{GDBN} displays a stack frame, Emacs automatically finds the
+source file for that frame and puts an arrow (@samp{=>}) at the
+left margin of the current line.  Emacs uses a separate buffer for
+source display, and splits the screen to show both your @value{GDBN} session
+and the source.
+
+Explicit @value{GDBN} @code{list} or search commands still produce output as
+usual, but you probably have no reason to use them from Emacs.
+
+@quotation
+@emph{Warning:} If the directory where your program resides is not your
+current directory, it can be easy to confuse Emacs about the location of
+the source files, in which case the auxiliary display buffer does not
+appear to show your source.  @value{GDBN} can find programs by searching your
+environment's @code{PATH} variable, so the @value{GDBN} input and output
+session proceeds normally; but Emacs does not get enough information
+back from @value{GDBN} to locate the source files in this situation.  To
+avoid this problem, either start @value{GDBN} mode from the directory where
+your program resides, or specify an absolute file name when prompted for the
+@kbd{M-x gdb} argument.
+
+A similar confusion can result if you use the @value{GDBN} @code{file} command to
+switch to debugging a program in some other location, from an existing
+@value{GDBN} buffer in Emacs.
+@end quotation
+
+By default, @kbd{M-x gdb} calls the program called @file{gdb}.  If
+you need to call @value{GDBN} by a different name (for example, if you keep
+several configurations around, with different names) you can set the
+Emacs variable @code{gdb-command-name}; for example,
+
+@example
+(setq gdb-command-name "mygdb")
+@end example
+
+@noindent
+(preceded by @kbd{ESC ESC}, or typed in the @code{*scratch*} buffer, or
+in your @file{.emacs} file) makes Emacs call the program named
+``@code{mygdb}'' instead.
+
+In the @value{GDBN} I/O buffer, you can use these special Emacs commands in
+addition to the standard Shell mode commands:
+
+@table @kbd
+@item C-h m
+Describe the features of Emacs' @value{GDBN} Mode.
+
+@item M-s
+Execute to another source line, like the @value{GDBN} @code{step} command; also
+update the display window to show the current file and location.
+
+@item M-n
+Execute to next source line in this function, skipping all function
+calls, like the @value{GDBN} @code{next} command.  Then update the display window
+to show the current file and location.
+
+@item M-i
+Execute one instruction, like the @value{GDBN} @code{stepi} command; update
+display window accordingly.
+
+@item M-x gdb-nexti
+Execute to next instruction, using the @value{GDBN} @code{nexti} command; update
+display window accordingly.
+
+@item C-c C-f
+Execute until exit from the selected stack frame, like the @value{GDBN}
+@code{finish} command.
+
+@item M-c
+Continue execution of your program, like the @value{GDBN} @code{continue}
+command.
+
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-p}.
+
+@item M-u
+Go up the number of frames indicated by the numeric argument
+(@pxref{Arguments, , Numeric Arguments, Emacs, The @sc{gnu} Emacs Manual}),
+like the @value{GDBN} @code{up} command.
+
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-u}.
+
+@item M-d
+Go down the number of frames indicated by the numeric argument, like the
+@value{GDBN} @code{down} command.
+
+@emph{Warning:} In Emacs v19, this command is @kbd{C-c C-d}.
+
+@item C-x &
+Read the number where the cursor is positioned, and insert it at the end
+of the @value{GDBN} I/O buffer.  For example, if you wish to disassemble code
+around an address that was displayed earlier, type @kbd{disassemble};
+then move the cursor to the address display, and pick up the
+argument for @code{disassemble} by typing @kbd{C-x &}.
+
+You can customize this further by defining elements of the list
+@code{gdb-print-command}; once it is defined, you can format or
+otherwise process numbers picked up by @kbd{C-x &} before they are
+inserted.  A numeric argument to @kbd{C-x &} indicates that you
+wish special formatting, and also acts as an index to pick an element of the
+list.  If the list element is a string, the number to be inserted is
+formatted using the Emacs function @code{format}; otherwise the number
+is passed as an argument to the corresponding list element.
+@end table
+
+In any source file, the Emacs command @kbd{C-x SPC} (@code{gdb-break})
+tells @value{GDBN} to set a breakpoint on the source line point is on.
+
+If you accidentally delete the source-display buffer, an easy way to get
+it back is to type the command @code{f} in the @value{GDBN} buffer, to
+request a frame display; when you run under Emacs, this recreates
+the source buffer if necessary to show you the context of the current
+frame.
+
+The source files displayed in Emacs are in ordinary Emacs buffers
+which are visiting the source files in the usual way.  You can edit
+the files with these buffers if you wish; but keep in mind that @value{GDBN}
+communicates with Emacs in terms of line numbers.  If you add or
+delete lines from the text, the line numbers that @value{GDBN} knows cease
+to correspond properly with the code.
+
+@c The following dropped because Epoch is nonstandard.  Reactivate
+@c if/when v19 does something similar. ---doc@cygnus.com 19dec1990
+@ignore
+@kindex Emacs Epoch environment
+@kindex Epoch
+@kindex inspect
+
+Version 18 of @sc{gnu} Emacs has a built-in window system 
+called the @code{epoch}
+environment.  Users of this environment can use a new command,
+@code{inspect} which performs identically to @code{print} except that
+each value is printed in its own window.
+@end ignore
+@end ifclear
+
+@node GDB Bugs
+@c links whacked to pacify makeinfo
+@c , Command Line Editing, Emacs, Top
+@chapter Reporting Bugs in @value{GDBN}
+@cindex bugs in @value{GDBN}
+@cindex reporting bugs in @value{GDBN}
+
+Your bug reports play an essential role in making @value{GDBN} reliable.
+
+Reporting a bug may help you by bringing a solution to your problem, or it
+may not.  But in any case the principal function of a bug report is to help
+the entire community by making the next version of @value{GDBN} work better.  Bug
+reports are your contribution to the maintenance of @value{GDBN}.
+
+In order for a bug report to serve its purpose, you must include the
+information that enables us to fix the bug.
+
+@menu
+* Bug Criteria::                Have you found a bug?
+* Bug Reporting::               How to report bugs
+@end menu
+
+@node Bug Criteria, Bug Reporting, GDB Bugs, GDB Bugs
+@section Have you found a bug?
+@cindex bug criteria
+
+If you are not sure whether you have found a bug, here are some guidelines:
+
+@itemize @bullet
+@cindex fatal signal
+@cindex debugger crash
+@cindex crash of debugger
+@item
+If the debugger gets a fatal signal, for any input whatever, that is a
+@value{GDBN} bug.  Reliable debuggers never crash.
+
+@cindex error on valid input
+@item
+If @value{GDBN} produces an error message for valid input, that is a
+bug.  (Note that if you're cross debugging, the problem may also be
+somewhere in the connection to the target.)
+
+@cindex invalid input
+@item
+If @value{GDBN} does not produce an error message for invalid input,
+that is a bug.  However, you should note that your idea of
+``invalid input'' might be our idea of ``an extension'' or ``support
+for traditional practice''.
+
+@item
+If you are an experienced user of debugging tools, your suggestions
+for improvement of @value{GDBN} are welcome in any case.
+@end itemize
+
+@node Bug Reporting,  , Bug Criteria, GDB Bugs
+@section How to report bugs
+@cindex bug reports
+@cindex @value{GDBN} bugs, reporting
+
+@ifclear HPPA
+A number of companies and individuals offer support for @sc{gnu} products.
+If you obtained @value{GDBN} from a support organization, we recommend you
+contact that organization first.
+
+You can find contact information for many support companies and
+individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs
+distribution.
+@c should add a web page ref...
+
+In any event, we also recommend that you send bug reports for
+@value{GDBN} to this addresses:
+
+@example
+bug-gdb@@prep.ai.mit.edu
+@end example
+
+@strong{Do not send bug reports to @samp{info-gdb}, or to
+@samp{help-gdb}, or to any newsgroups.} Most users of @value{GDBN} do
+not want to receive bug reports.  Those that do have arranged to receive
+@samp{bug-gdb}.
+
+The mailing list @samp{bug-gdb} has a newsgroup @samp{gnu.gdb.bug} which
+serves as a repeater.  The mailing list and the newsgroup carry exactly
+the same messages.  Often people think of posting bug reports to the
+newsgroup instead of mailing them.  This appears to work, but it has one
+problem which can be crucial: a newsgroup posting often lacks a mail
+path back to the sender.  Thus, if we need to ask for more information,
+we may be unable to reach you.  For this reason, it is better to send
+bug reports to the mailing list.
+
+As a last resort, send bug reports on paper to:
+
+@example
+@sc{gnu} Debugger Bugs
+Free Software Foundation Inc.
+59 Temple Place - Suite 330
+Boston, MA 02111-1307
+USA
+@end example
+@end ifclear
+
+@ifset HPPA
+If you obtained HP GDB as part of your HP ANSI C or HP ANSI C++ compiler
+kit, report problems to your HP Support Representative.
+
+If you obtained HP GDB from the Hewlett-Packard Web site, report
+problems by electronic mail to @code{wdb-www@@ch.hp.com}.
+@end ifset
+
+The fundamental principle of reporting bugs usefully is this:
+@strong{report all the facts}.  If you are not sure whether to state a
+fact or leave it out, state it!
+
+Often people omit facts because they think they know what causes the
+problem and assume that some details do not matter.  Thus, you might
+assume that the name of the variable you use in an example does not matter.
+Well, probably it does not, but one cannot be sure.  Perhaps the bug is a
+stray memory reference which happens to fetch from the location where that
+name is stored in memory; perhaps, if the name were different, the contents
+of that location would fool the debugger into doing the right thing despite
+the bug.  Play it safe and give a specific, complete example.  That is the
+easiest thing for you to do, and the most helpful.
+
+Keep in mind that the purpose of a bug report is to enable us to fix the
+bug.  It may be that the bug has been reported previously, but neither
+you nor we can know that unless your bug report is complete and
+self-contained.
+
+Sometimes people give a few sketchy facts and ask, ``Does this ring a
+bell?''  Those bug reports are useless, and we urge everyone to
+@emph{refuse to respond to them} except to chide the sender to report
+bugs properly.
+
+To enable us to fix the bug, you should include all these things:
+
+@itemize @bullet
+@item
+The version of @value{GDBN}.  @value{GDBN} announces it if you start
+with no arguments; you can also print it at any time using @code{show
+version}.
+
+Without this, we will not know whether there is any point in looking for
+the bug in the current version of @value{GDBN}.
+
+@item
+The type of machine you are using, and the operating system name and
+version number.
+
+@ifclear HPPA
+@item
+What compiler (and its version) was used to compile @value{GDBN}---e.g.
+``@value{GCC}--2.8.1''.
+@end ifclear
+
+@item
+What compiler (and its version) was used to compile the program you are
+debugging---e.g.  ``@value{GCC}--2.8.1'', or ``HP92453-01 A.10.32.03 HP
+C Compiler''.  For GCC, you can say @code{gcc --version} to get this
+information; for other compilers, see the documentation for those
+compilers.
+
+@item
+The command arguments you gave the compiler to compile your example and
+observe the bug.  For example, did you use @samp{-O}?  To guarantee
+you will not omit something important, list them all.  A copy of the
+Makefile (or the output from make) is sufficient.
+
+If we were to try to guess the arguments, we would probably guess wrong
+and then we might not encounter the bug.
+
+@item
+A complete input script, and all necessary source files, that will
+reproduce the bug.
+
+@item
+A description of what behavior you observe that you believe is
+incorrect.  For example, ``It gets a fatal signal.''
+
+Of course, if the bug is that @value{GDBN} gets a fatal signal, then we
+will certainly notice it.  But if the bug is incorrect output, we might
+not notice unless it is glaringly wrong.  You might as well not give us
+a chance to make a mistake.
+
+Even if the problem you experience is a fatal signal, you should still
+say so explicitly.  Suppose something strange is going on, such as, your
+copy of @value{GDBN} is out of synch, or you have encountered a bug in
+the C library on your system.  (This has happened!)  Your copy might
+crash and ours would not.  If you told us to expect a crash, then when
+ours fails to crash, we would know that the bug was not happening for
+us.  If you had not told us to expect a crash, then we would not be able
+to draw any conclusion from our observations.
+
+@ifclear HPPA
+@item
+If you wish to suggest changes to the @value{GDBN} source, send us context
+diffs.  If you even discuss something in the @value{GDBN} source, refer to
+it by context, not by line number.
+
+The line numbers in our development sources will not match those in your
+sources.  Your line numbers would convey no useful information to us.
+@end ifclear
+@end itemize
+
+Here are some things that are not necessary:
+
+@itemize @bullet
+@item
+A description of the envelope of the bug.
+
+Often people who encounter a bug spend a lot of time investigating
+which changes to the input file will make the bug go away and which
+changes will not affect it.
+
+This is often time consuming and not very useful, because the way we
+will find the bug is by running a single example under the debugger
+with breakpoints, not by pure deduction from a series of examples.
+We recommend that you save your time for something else.
+
+Of course, if you can find a simpler example to report @emph{instead}
+of the original one, that is a convenience for us.  Errors in the
+output will be easier to spot, running under the debugger will take
+less time, and so on.
+
+However, simplification is not vital; if you do not want to do this,
+report the bug anyway and send us the entire test case you used.
+
+@item
+A patch for the bug.
+
+A patch for the bug does help us if it is a good one.  But do not omit
+the necessary information, such as the test case, on the assumption that
+a patch is all we need.  We might see problems with your patch and decide
+to fix the problem another way, or we might not understand it at all.
+
+Sometimes with a program as complicated as @value{GDBN} it is very hard to
+construct an example that will make the program follow a certain path
+through the code.  If you do not send us the example, we will not be able
+to construct one, so we will not be able to verify that the bug is fixed.
+
+And if we cannot understand what bug you are trying to fix, or why your
+patch should be an improvement, we will not install it.  A test case will
+help us to understand.
+
+@item
+A guess about what the bug is or what it depends on.
+
+Such guesses are usually wrong.  Even we cannot guess right about such
+things without first using the debugger to find the facts.
+@end itemize
+
+@c The readline documentation is distributed with the readline code 
+@c and consists of the two following files:
+@c     rluser.texinfo
+@c     inc-hist.texi
+@c Use -I with makeinfo to point to the appropriate directory,
+@c environment var TEXINPUTS with TeX.
+@include rluser.texinfo
+@include inc-hist.texi
+
+
+@ifclear PRECONFIGURED
+@ifclear HPPA
+@node Formatting Documentation
+@c links whacked to pacify makeinfo
+@c , Installing GDB, Renamed Commands, Top
+@appendix Formatting Documentation
+
+@cindex @value{GDBN} reference card
+@cindex reference card
+The @value{GDBN} 4 release includes an already-formatted reference card, ready
+for printing with PostScript or Ghostscript, in the @file{gdb}
+subdirectory of the main source directory@footnote{In
+@file{gdb-@value{GDBVN}/gdb/refcard.ps} of the version @value{GDBVN}
+release.}.  If you can use PostScript or Ghostscript with your printer,
+you can print the reference card immediately with @file{refcard.ps}.
+
+The release also includes the source for the reference card.  You
+can format it, using @TeX{}, by typing:
+
+@example
+make refcard.dvi
+@end example
+
+The @value{GDBN} reference card is designed to print in @dfn{landscape} 
+mode on US ``letter'' size paper; 
+that is, on a sheet 11 inches wide by 8.5 inches
+high.  You will need to specify this form of printing as an option to
+your @sc{dvi} output program.
+
+@cindex documentation
+
+All the documentation for @value{GDBN} comes as part of the machine-readable
+distribution.  The documentation is written in Texinfo format, which is
+a documentation system that uses a single source file to produce both
+on-line information and a printed manual.  You can use one of the Info
+formatting commands to create the on-line version of the documentation
+and @TeX{} (or @code{texi2roff}) to typeset the printed version.
+
+@value{GDBN} includes an already formatted copy of the on-line Info
+version of this manual in the @file{gdb} subdirectory.  The main Info
+file is @file{gdb-@value{GDBVN}/gdb/gdb.info}, and it refers to
+subordinate files matching @samp{gdb.info*} in the same directory.  If
+necessary, you can print out these files, or read them with any editor;
+but they are easier to read using the @code{info} subsystem in @sc{gnu}
+Emacs or the standalone @code{info} program, available as part of the
+@sc{gnu} Texinfo distribution.
+
+If you want to format these Info files yourself, you need one of the
+Info formatting programs, such as @code{texinfo-format-buffer} or
+@code{makeinfo}.
+
+If you have @code{makeinfo} installed, and are in the top level
+@value{GDBN} source directory (@file{gdb-@value{GDBVN}}, in the case of
+version @value{GDBVN}), you can make the Info file by typing:
+
+@example
+cd gdb
+make gdb.info
+@end example
+
+If you want to typeset and print copies of this manual, you need @TeX{},
+a program to print its @sc{dvi} output files, and @file{texinfo.tex}, the
+Texinfo definitions file.
+
+@TeX{} is a typesetting program; it does not print files directly, but
+produces output files called @sc{dvi} files.  To print a typeset
+document, you need a program to print @sc{dvi} files.  If your system
+has @TeX{} installed, chances are it has such a program.  The precise
+command to use depends on your system; @kbd{lpr -d} is common; another
+(for PostScript devices) is @kbd{dvips}.  The @sc{dvi} print command may
+require a file name without any extension or a @samp{.dvi} extension.
+
+@TeX{} also requires a macro definitions file called
+@file{texinfo.tex}.  This file tells @TeX{} how to typeset a document
+written in Texinfo format.  On its own, @TeX{} cannot either read or
+typeset a Texinfo file.  @file{texinfo.tex} is distributed with GDB
+and is located in the @file{gdb-@var{version-number}/texinfo}
+directory.
+
+If you have @TeX{} and a @sc{dvi} printer program installed, you can
+typeset and print this manual.  First switch to the the @file{gdb}
+subdirectory of the main source directory (for example, to
+@file{gdb-@value{GDBVN}/gdb}) and type:
+
+@example
+make gdb.dvi
+@end example
+
+Then give @file{gdb.dvi} to your @sc{dvi} printing program.
+@end ifclear
+
+@node Installing GDB, Index, Using History Interactively, Top
+@appendix Installing @value{GDBN}
+@cindex configuring @value{GDBN}
+@cindex installation
+
+@ifset HPPA
+If you obtain @value{GDBN} (HP WDB 0.75) as part of your HP ANSI C or
+HP ANSI C++ Developer's Kit at HP-UX Release 11.0, you do not have to
+take any special action to build or install @value{GDBN}.
+
+If you obtain @value{GDBN} (HP WDB 0.75) from an HP web site, you may
+download either a @code{swinstall}-able package or a source tree, or
+both.
+
+Most customers will want to install the @value{GDBN} binary that is part
+of the @code{swinstall}-able package.  To do so, use a command of the
+form
+
+@smallexample
+/usr/sbin/swinstall -s @var{package-name} WDB
+@end smallexample
+
+Alternatively, it is possible to build @value{GDBN} from the source
+distribution.  Sophisticated customers who want to modify the debugger
+sources to tailor @value{GDBN} to their their needs may wish to do this.
+The source distribution consists of a @code{tar}'ed source tree rooted
+at @file{gdb-4.16/...}.  The instructions that follow describe how to
+build a @file{gdb} executable from this source tree.  HP believes that
+these instructions apply to the WDB source tree that it distributes.
+However, HP does not explicitly support building a @file{gdb} for any
+non-HP platform from the WDB source tree.  It may work, but HP has not
+tested it for any platforms other than those described in the WDB 0.75
+Release Notes.
+@end ifset
+
+@value{GDBN} comes with a @code{configure} script that automates the process
+of preparing @value{GDBN} for installation; you can then use @code{make} to
+build the @code{gdb} program.
+@iftex
+@c irrelevant in info file; it's as current as the code it lives with.
+@footnote{If you have a more recent version of @value{GDBN} than @value{GDBVN},
+look at the @file{README} file in the sources; we may have improved the
+installation procedures since publishing this manual.}
+@end iftex
+
+The @value{GDBN} distribution includes all the source code you need for 
+@value{GDBN} in a single directory, whose name is usually composed by 
+appending the version number to @samp{gdb}.
+
+For example, the @value{GDBN} version @value{GDBVN} distribution is in the
+@file{gdb-@value{GDBVN}} directory.  That directory contains:
+
+@table @code
+@item gdb-@value{GDBVN}/configure @r{(and supporting files)}
+script for configuring @value{GDBN} and all its supporting libraries
+
+@item gdb-@value{GDBVN}/gdb
+the source specific to @value{GDBN} itself
+
+@item gdb-@value{GDBVN}/bfd
+source for the Binary File Descriptor library
+
+@item gdb-@value{GDBVN}/include
+@sc{gnu} include files
+
+@item gdb-@value{GDBVN}/libiberty
+source for the @samp{-liberty} free software library
+
+@item gdb-@value{GDBVN}/opcodes
+source for the library of opcode tables and disassemblers
+
+@item gdb-@value{GDBVN}/readline
+source for the @sc{gnu} command-line interface
+
+@item gdb-@value{GDBVN}/glob
+source for the @sc{gnu} filename pattern-matching subroutine
+
+@item gdb-@value{GDBVN}/mmalloc
+source for the @sc{gnu} memory-mapped malloc package
+@end table
+
+The simplest way to configure and build @value{GDBN} is to run @code{configure}
+from the @file{gdb-@var{version-number}} source directory, which in
+this example is the @file{gdb-@value{GDBVN}} directory.
+
+First switch to the @file{gdb-@var{version-number}} source directory
+if you are not already in it; then run @code{configure}.  Pass the
+identifier for the platform on which @value{GDBN} will run as an
+argument.
+
+For example:
+
+@example
+cd gdb-@value{GDBVN}
+./configure @var{host}
+make
+@end example
+
+@noindent
+where @var{host} is an identifier such as @samp{sun4} or
+@samp{decstation}, that identifies the platform where @value{GDBN} will run.
+(You can often leave off @var{host}; @code{configure} tries to guess the
+correct value by examining your system.)
+
+Running @samp{configure @var{host}} and then running @code{make} builds the
+@file{bfd}, @file{readline}, @file{mmalloc}, and @file{libiberty}
+libraries, then @code{gdb} itself.  The configured source files, and the
+binaries, are left in the corresponding source directories.
+
+@need 750
+@code{configure} is a Bourne-shell (@code{/bin/sh}) script; if your
+system does not recognize this automatically when you run a different
+shell, you may need to run @code{sh} on it explicitly:
+
+@example
+sh configure @var{host}
+@end example
+
+If you run @code{configure} from a directory that contains source
+directories for multiple libraries or programs, such as the
+@file{gdb-@value{GDBVN}} source directory for version @value{GDBVN}, @code{configure}
+creates configuration files for every directory level underneath (unless
+you tell it not to, with the @samp{--norecursion} option).
+
+You can run the @code{configure} script from any of the
+subordinate directories in the @value{GDBN} distribution if you only want to
+configure that subdirectory, but be sure to specify a path to it.
+
+For example, with version @value{GDBVN}, type the following to configure only
+the @code{bfd} subdirectory:
+
+@example
+@group
+cd gdb-@value{GDBVN}/bfd
+../configure @var{host}
+@end group
+@end example
+
+You can install @code{@value{GDBP}} anywhere; it has no hardwired paths.
+However, you should make sure that the shell on your path (named by
+the @samp{SHELL} environment variable) is publicly readable.  Remember
+that @value{GDBN} uses the shell to start your program---some systems refuse to
+let @value{GDBN} debug child processes whose programs are not readable.
+
+@menu
+* Separate Objdir::             Compiling @value{GDBN} in another directory
+* Config Names::                Specifying names for hosts and targets
+* Configure Options::           Summary of options for configure
+@end menu
+
+@node Separate Objdir, Config Names, Installing GDB, Installing GDB
+@section Compiling @value{GDBN} in another directory
+
+If you want to run @value{GDBN} versions for several host or target machines,
+you need a different @code{gdb} compiled for each combination of
+host and target.  @code{configure} is designed to make this easy by
+allowing you to generate each configuration in a separate subdirectory,
+rather than in the source directory.  If your @code{make} program
+handles the @samp{VPATH} feature (@sc{gnu} @code{make} does), running
+@code{make} in each of these directories builds the @code{gdb}
+program specified there.
+
+To build @code{gdb} in a separate directory, run @code{configure}
+with the @samp{--srcdir} option to specify where to find the source.
+(You also need to specify a path to find @code{configure}
+itself from your working directory.  If the path to @code{configure}
+would be the same as the argument to @samp{--srcdir}, you can leave out
+the @samp{--srcdir} option; it is assumed.)
+
+For example, with version @value{GDBVN}, you can build @value{GDBN} in a 
+separate directory for a Sun 4 like this:
+
+@example
+@group
+cd gdb-@value{GDBVN}
+mkdir ../gdb-sun4
+cd ../gdb-sun4
+../gdb-@value{GDBVN}/configure sun4
+make
+@end group
+@end example
+
+When @code{configure} builds a configuration using a remote source
+directory, it creates a tree for the binaries with the same structure
+(and using the same names) as the tree under the source directory.  In
+the example, you'd find the Sun 4 library @file{libiberty.a} in the
+directory @file{gdb-sun4/libiberty}, and @value{GDBN} itself in
+@file{gdb-sun4/gdb}.
+
+One popular reason to build several @value{GDBN} configurations in separate
+directories is to configure @value{GDBN} for cross-compiling (where 
+@value{GDBN} runs on one machine---the @dfn{host}---while debugging 
+programs that run on another machine---the @dfn{target}).  
+You specify a cross-debugging target by
+giving the @samp{--target=@var{target}} option to @code{configure}.
+
+When you run @code{make} to build a program or library, you must run
+it in a configured directory---whatever directory you were in when you
+called @code{configure} (or one of its subdirectories).
+
+The @code{Makefile} that @code{configure} generates in each source
+directory also runs recursively.  If you type @code{make} in a source
+directory such as @file{gdb-@value{GDBVN}} (or in a separate configured
+directory configured with @samp{--srcdir=@var{dirname}/gdb-@value{GDBVN}}), you
+will build all the required libraries, and then build GDB.
+
+When you have multiple hosts or targets configured in separate
+directories, you can run @code{make} on them in parallel (for example,
+if they are NFS-mounted on each of the hosts); they will not interfere
+with each other.
+
+@node Config Names, Configure Options, Separate Objdir, Installing GDB
+@section Specifying names for hosts and targets
+
+The specifications used for hosts and targets in the @code{configure}
+script are based on a three-part naming scheme, but some short predefined
+aliases are also supported.  The full naming scheme encodes three pieces
+of information in the following pattern:
+
+@example
+@var{architecture}-@var{vendor}-@var{os}
+@end example
+
+For example, you can use the alias @code{sun4} as a @var{host} argument,
+or as the value for @var{target} in a @code{--target=@var{target}}
+option.  The equivalent full name is @samp{sparc-sun-sunos4}.
+
+The @code{configure} script accompanying @value{GDBN} does not provide
+any query facility to list all supported host and target names or
+aliases.  @code{configure} calls the Bourne shell script
+@code{config.sub} to map abbreviations to full names; you can read the
+script, if you wish, or you can use it to test your guesses on
+abbreviations---for example:
+
+@smallexample
+% sh config.sub i386-linux
+i386-pc-linux-gnu
+% sh config.sub alpha-linux
+alpha-unknown-linux-gnu
+% sh config.sub hp9k700
+hppa1.1-hp-hpux
+% sh config.sub sun4
+sparc-sun-sunos4.1.1
+% sh config.sub sun3
+m68k-sun-sunos4.1.1
+% sh config.sub i986v
+Invalid configuration `i986v': machine `i986v' not recognized
+@end smallexample
+
+@noindent
+@code{config.sub} is also distributed in the @value{GDBN} source
+directory (@file{gdb-@value{GDBVN}}, for version @value{GDBVN}).
+
+@node Configure Options,  , Config Names, Installing GDB
+@section @code{configure} options
+
+Here is a summary of the @code{configure} options and arguments that
+are most often useful for building @value{GDBN}.  @code{configure} also has
+several other options not listed here.  @inforef{What Configure
+Does,,configure.info}, for a full explanation of @code{configure}.
+
+@example
+configure @r{[}--help@r{]}
+          @r{[}--prefix=@var{dir}@r{]}
+          @r{[}--exec-prefix=@var{dir}@r{]}
+          @r{[}--srcdir=@var{dirname}@r{]}
+          @r{[}--norecursion@r{]} @r{[}--rm@r{]}
+          @r{[}--target=@var{target}@r{]}
+          @var{host}
+@end example
+
+@noindent
+You may introduce options with a single @samp{-} rather than
+@samp{--} if you prefer; but you may abbreviate option names if you use
+@samp{--}.
+
+@table @code
+@item --help
+Display a quick summary of how to invoke @code{configure}.
+
+@item --prefix=@var{dir}
+Configure the source to install programs and files under directory
+@file{@var{dir}}.
+
+@item --exec-prefix=@var{dir}
+Configure the source to install programs under directory
+@file{@var{dir}}.
+
+@c avoid splitting the warning from the explanation:
+@need 2000
+@item --srcdir=@var{dirname}
+@strong{Warning: using this option requires @sc{gnu} @code{make}, or another
+@code{make} that implements the @code{VPATH} feature.}@*
+Use this option to make configurations in directories separate from the
+@value{GDBN} source directories.  Among other things, you can use this to
+build (or maintain) several configurations simultaneously, in separate
+directories.  @code{configure} writes configuration specific files in
+the current directory, but arranges for them to use the source in the
+directory @var{dirname}.  @code{configure} creates directories under
+the working directory in parallel to the source directories below
+@var{dirname}.
+
+@item --norecursion
+Configure only the directory level where @code{configure} is executed; do not
+propagate configuration to subdirectories.
+
+@item --target=@var{target}
+Configure @value{GDBN} for cross-debugging programs running on the specified
+@var{target}.  Without this option, @value{GDBN} is configured to debug
+programs that run on the same machine (@var{host}) as @value{GDBN} itself.
+
+There is no convenient way to generate a list of all available targets.
+
+@item @var{host} @dots{}
+Configure @value{GDBN} to run on the specified @var{host}.
+
+There is no convenient way to generate a list of all available hosts.
+@end table
+
+There are many other options available as well, but they are generally
+needed for special purposes only.
+@end ifclear
+
+ 
+@node Index,  , Installing GDB, Top
+@unnumbered Index
+
+@printindex cp
+
+@tex
+% I think something like @colophon should be in texinfo.  In the
+% meantime:
+\long\def\colophon{\hbox to0pt{}\vfill
+\centerline{The body of this manual is set in}
+\centerline{\fontname\tenrm,}
+\centerline{with headings in {\bf\fontname\tenbf}}
+\centerline{and examples in {\tt\fontname\tentt}.}
+\centerline{{\it\fontname\tenit\/},}
+\centerline{{\bf\fontname\tenbf}, and}
+\centerline{{\sl\fontname\tensl\/}}
+\centerline{are used for emphasis.}\vfill}
+\page\colophon
+% Blame: doc@cygnus.com, 1991.
+@end tex
+
+@contents
+@bye
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
new file mode 100644
index 0000000..99f081d
--- /dev/null
+++ b/gdb/doc/gdbint.texinfo
@@ -0,0 +1,2711 @@
+\input texinfo
+@setfilename gdbint.info
+
+@ifinfo
+@format
+START-INFO-DIR-ENTRY
+* Gdb-Internals: (gdbint).	The GNU debugger's internals.
+END-INFO-DIR-ENTRY
+@end format
+@end ifinfo
+
+@ifinfo
+This file documents the internals of the GNU debugger GDB.
+
+Copyright 1990-1999 Free Software Foundation, Inc.
+Contributed by Cygnus Solutions.  Written by John Gilmore.
+Second Edition by Stan Shebs.
+
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
+
+@ignore
+Permission is granted to process this file through Tex and print the
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy or distribute modified versions of this
+manual under the terms of the GPL (for which purpose this text may be
+regarded as a program in the language TeX).
+@end ifinfo
+
+@setchapternewpage off
+@settitle GDB Internals
+
+@titlepage
+@title{GDB Internals}
+@subtitle{A guide to the internals of the GNU debugger}
+@author John Gilmore
+@author Cygnus Solutions
+@author Second Edition:
+@author Stan Shebs
+@author Cygnus Solutions
+@page
+@tex
+\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
+\xdef\manvers{\$Revision$}  % For use in headers, footers too
+{\parskip=0pt
+\hfill Cygnus Solutions\par
+\hfill \manvers\par
+\hfill \TeX{}info \texinfoversion\par
+}
+@end tex
+
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1990-1999 Free Software Foundation, Inc.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@end titlepage
+
+@node Top
+@c Perhaps this should be the title of the document (but only for info,
+@c not for TeX).  Existing GNU manuals seem inconsistent on this point.
+@top Scope of this Document
+
+This document documents the internals of the GNU debugger, GDB.  It
+includes description of GDB's key algorithms and operations, as well
+as the mechanisms that adapt GDB to specific hosts and targets.
+
+@menu
+* Requirements::
+* Overall Structure::
+* Algorithms::
+* User Interface::
+* Symbol Handling::
+* Language Support::
+* Host Definition::
+* Target Architecture Definition::
+* Target Vector Definition::
+* Native Debugging::
+* Support Libraries::
+* Coding::
+* Porting GDB::
+* Hints::
+@end menu
+
+@node Requirements
+
+@chapter Requirements
+
+Before diving into the internals, you should understand the formal
+requirements and other expectations for GDB.  Although some of these may
+seem obvious, there have been proposals for GDB that have run counter to
+these requirements.
+
+First of all, GDB is a debugger.  It's not designed to be a front panel
+for embedded systems.  It's not a text editor.  It's not a shell.  It's
+not a programming environment.
+
+GDB is an interactive tool.  Although a batch mode is available, GDB's
+primary role is to interact with a human programmer.
+
+GDB should be responsive to the user.  A programmer hot on the trail of
+a nasty bug, and operating under a looming deadline, is going to be very
+impatient of everything, including the response time to debugger
+commands.
+
+GDB should be relatively permissive, such as for expressions.  While the
+compiler should be picky (or have the option to be made picky), since
+source code lives for a long time usually, the programmer doing
+debugging shouldn't be spending time figuring out to mollify the
+debugger.
+
+GDB will be called upon to deal with really large programs.  Executable
+sizes of 50 to 100 megabytes occur regularly, and we've heard reports of
+programs approaching 1 gigabyte in size.
+
+GDB should be able to run everywhere.  No other debugger is available
+for even half as many configurations as GDB supports.
+
+
+@node Overall Structure
+
+@chapter Overall Structure
+
+GDB consists of three major subsystems: user interface, symbol handling
+(the ``symbol side''), and target system handling (the ``target side'').
+
+Ther user interface consists of several actual interfaces, plus
+supporting code.
+
+The symbol side consists of object file readers, debugging info
+interpreters, symbol table management, source language expression
+parsing, type and value printing.
+
+The target side consists of execution control, stack frame analysis, and
+physical target manipulation.
+
+The target side/symbol side division is not formal, and there are a
+number of exceptions.  For instance, core file support involves symbolic
+elements (the basic core file reader is in BFD) and target elements (it
+supplies the contents of memory and the values of registers).  Instead,
+this division is useful for understanding how the minor subsystems
+should fit together.
+
+@section The Symbol Side
+
+The symbolic side of GDB can be thought of as ``everything you can do in
+GDB without having a live program running''.  For instance, you can look
+at the types of variables, and evaluate many kinds of expressions.
+
+@section The Target Side
+
+The target side of GDB is the ``bits and bytes manipulator''.  Although
+it may make reference to symbolic info here and there, most of the
+target side will run with only a stripped executable available -- or
+even no executable at all, in remote debugging cases.
+
+Operations such as disassembly, stack frame crawls, and register
+display, are able to work with no symbolic info at all.  In some cases,
+such as disassembly, GDB will use symbolic info to present addresses
+relative to symbols rather than as raw numbers, but it will work either
+way.
+
+@section Configurations
+
+@dfn{Host} refers to attributes of the system where GDB runs.
+@dfn{Target} refers to the system where the program being debugged
+executes.  In most cases they are the same machine, in which case a
+third type of @dfn{Native} attributes come into play.
+
+Defines and include files needed to build on the host are host support.
+Examples are tty support, system defined types, host byte order, host
+float format.
+
+Defines and information needed to handle the target format are target
+dependent.  Examples are the stack frame format, instruction set,
+breakpoint instruction, registers, and how to set up and tear down the stack
+to call a function.
+
+Information that is only needed when the host and target are the same,
+is native dependent.  One example is Unix child process support; if the
+host and target are not the same, doing a fork to start the target
+process is a bad idea.  The various macros needed for finding the
+registers in the @code{upage}, running @code{ptrace}, and such are all
+in the native-dependent files.
+
+Another example of native-dependent code is support for features that
+are really part of the target environment, but which require
+@code{#include} files that are only available on the host system.  Core
+file handling and @code{setjmp} handling are two common cases.
+
+When you want to make GDB work ``native'' on a particular machine, you
+have to include all three kinds of information.
+
+
+@node Algorithms
+
+@chapter Algorithms
+
+GDB uses a number of debugging-specific algorithms.  They are often not
+very complicated, but get lost in the thicket of special cases and
+real-world issues.  This chapter describes the basic algorithms and
+mentions some of the specific target definitions that they use.
+
+@section Frames
+
+A frame is a construct that GDB uses to keep track of calling and called
+functions.
+
+@code{FRAME_FP} in the machine description has no meaning to the
+machine-independent part of GDB, except that it is used when setting up
+a new frame from scratch, as follows:
+
+@example
+      create_new_frame (read_register (FP_REGNUM), read_pc ()));
+@end example
+
+Other than that, all the meaning imparted to @code{FP_REGNUM} is
+imparted by the machine-dependent code.  So, @code{FP_REGNUM} can have
+any value that is convenient for the code that creates new frames.
+(@code{create_new_frame} calls @code{INIT_EXTRA_FRAME_INFO} if it is
+defined; that is where you should use the @code{FP_REGNUM} value, if
+your frames are nonstandard.)
+
+Given a GDB frame, define @code{FRAME_CHAIN} to determine the address of
+the calling function's frame.  This will be used to create a new GDB
+frame struct, and then @code{INIT_EXTRA_FRAME_INFO} and
+@code{INIT_FRAME_PC} will be called for the new frame.
+
+@section Breakpoint Handling
+
+In general, a breakpoint is a user-designated location in the program
+where the user wants to regain control if program execution ever reaches
+that location.
+
+There are two main ways to implement breakpoints; either as ``hardware''
+breakpoints or as ``software'' breakpoints.
+
+Hardware breakpoints are sometimes available as a builtin debugging
+features with some chips.  Typically these work by having dedicated
+register into which the breakpoint address may be stored.  If the PC
+ever matches a value in a breakpoint registers, the CPU raises an
+exception and reports it to GDB.  Another possibility is when an
+emulator is in use; many emulators include circuitry that watches the
+address lines coming out from the processor, and force it to stop if the
+address matches a breakpoint's address.  A third possibility is that the
+target already has the ability to do breakpoints somehow; for instance,
+a ROM monitor may do its own software breakpoints.  So although these
+are not literally ``hardware breakpoints'', from GDB's point of view
+they work the same; GDB need not do nothing more than set the breakpoint
+and wait for something to happen.
+
+Since they depend on hardware resources, hardware breakpoints may be
+limited in number; when the user asks for more, GDB will start trying to
+set software breakpoints.
+
+Software breakpoints require GDB to do somewhat more work.  The basic
+theory is that GDB will replace a program instruction a trap, illegal
+divide, or some other instruction that will cause an exception, and then
+when it's encountered, GDB will take the exception and stop the program.
+When the user says to continue, GDB will restore the original
+instruction, single-step, re-insert the trap, and continue on.
+
+Since it literally overwrites the program being tested, the program area
+must be writeable, so this technique won't work on programs in ROM.  It
+can also distort the behavior of programs that examine themselves,
+although the situation would be highly unusual.
+
+Also, the software breakpoint instruction should be the smallest size of
+instruction, so it doesn't overwrite an instruction that might be a jump
+target, and cause disaster when the program jumps into the middle of the
+breakpoint instruction.  (Strictly speaking, the breakpoint must be no
+larger than the smallest interval between instructions that may be jump
+targets; perhaps there is an architecture where only even-numbered
+instructions may jumped to.)  Note that it's possible for an instruction
+set not to have any instructions usable for a software breakpoint,
+although in practice only the ARC has failed to define such an
+instruction.
+
+The basic definition of the software breakpoint is the macro
+@code{BREAKPOINT}.
+
+Basic breakpoint object handling is in @file{breakpoint.c}.  However,
+much of the interesting breakpoint action is in @file{infrun.c}.
+
+@section Single Stepping
+
+@section Signal Handling
+
+@section Thread Handling
+
+@section Inferior Function Calls
+
+@section Longjmp Support
+
+GDB has support for figuring out that the target is doing a
+@code{longjmp} and for stopping at the target of the jump, if we are
+stepping.  This is done with a few specialized internal breakpoints,
+which are visible in the @code{maint info breakpoint} command.
+
+To make this work, you need to define a macro called
+@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
+structure and extract the longjmp target address.  Since @code{jmp_buf}
+is target specific, you will need to define it in the appropriate
+@file{tm-@var{xyz}.h} file.  Look in @file{tm-sun4os4.h} and
+@file{sparc-tdep.c} for examples of how to do this.
+
+@node User Interface
+
+@chapter User Interface
+
+GDB has several user interfaces.  Although the command-line interface
+is the most common and most familiar, there are others.
+
+@section Command Interpreter
+
+The command interpreter in GDB is fairly simple.  It is designed to
+allow for the set of commands to be augmented dynamically, and also
+has a recursive subcommand capability, where the first argument to
+a command may itself direct a lookup on a different command list.
+
+For instance, the @code{set} command just starts a lookup on the
+@code{setlist} command list, while @code{set thread} recurses
+to the @code{set_thread_cmd_list}.
+
+To add commands in general, use @code{add_cmd}.  @code{add_com} adds to
+the main command list, and should be used for those commands.  The usual
+place to add commands is in the @code{_initialize_@var{xyz}} routines at the
+ends of most source files.
+
+@section Console Printing
+
+@section TUI
+
+@section libgdb
+
+@code{libgdb} was an abortive project of years ago.  The theory was to
+provide an API to GDB's functionality.
+
+@node Symbol Handling
+
+@chapter Symbol Handling
+
+Symbols are a key part of GDB's operation.  Symbols include variables,
+functions, and types.
+
+@section Symbol Reading
+
+GDB reads symbols from ``symbol files''.  The usual symbol file is the
+file containing the program which GDB is debugging.  GDB can be directed
+to use a different file for symbols (with the @code{symbol-file}
+command), and it can also read more symbols via the ``add-file'' and
+``load'' commands, or while reading symbols from shared libraries.
+
+Symbol files are initially opened by code in @file{symfile.c} using the
+BFD library.  BFD identifies the type of the file by examining its
+header.  @code{symfile_init} then uses this identification to locate a
+set of symbol-reading functions.
+
+Symbol reading modules identify themselves to GDB by calling
+@code{add_symtab_fns} during their module initialization.  The argument
+to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the
+name (or name prefix) of the symbol format, the length of the prefix,
+and pointers to four functions.  These functions are called at various
+times to process symbol-files whose identification matches the specified
+prefix.
+
+The functions supplied by each module are:
+
+@table @code
+@item @var{xyz}_symfile_init(struct sym_fns *sf)
+
+Called from @code{symbol_file_add} when we are about to read a new
+symbol file.  This function should clean up any internal state (possibly
+resulting from half-read previous files, for example) and prepare to
+read a new symbol file. Note that the symbol file which we are reading
+might be a new "main" symbol file, or might be a secondary symbol file
+whose symbols are being added to the existing symbol table.
+
+The argument to @code{@var{xyz}_symfile_init} is a newly allocated
+@code{struct sym_fns} whose @code{bfd} field contains the BFD for the
+new symbol file being read.  Its @code{private} field has been zeroed,
+and can be modified as desired.  Typically, a struct of private
+information will be @code{malloc}'d, and a pointer to it will be placed
+in the @code{private} field.
+
+There is no result from @code{@var{xyz}_symfile_init}, but it can call
+@code{error} if it detects an unavoidable problem.
+
+@item @var{xyz}_new_init()
+
+Called from @code{symbol_file_add} when discarding existing symbols.
+This function need only handle the symbol-reading module's internal
+state; the symbol table data structures visible to the rest of GDB will
+be discarded by @code{symbol_file_add}.  It has no arguments and no
+result.  It may be called after @code{@var{xyz}_symfile_init}, if a new
+symbol table is being read, or may be called alone if all symbols are
+simply being discarded.
+
+@item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
+
+Called from @code{symbol_file_add} to actually read the symbols from a
+symbol-file into a set of psymtabs or symtabs.
+
+@code{sf} points to the struct sym_fns originally passed to
+@code{@var{xyz}_sym_init} for possible initialization.  @code{addr} is
+the offset between the file's specified start address and its true
+address in memory.  @code{mainline} is 1 if this is the main symbol
+table being read, and 0 if a secondary symbol file (e.g. shared library
+or dynamically loaded file) is being read.@refill
+@end table
+
+In addition, if a symbol-reading module creates psymtabs when
+@var{xyz}_symfile_read is called, these psymtabs will contain a pointer
+to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called
+from any point in the GDB symbol-handling code.
+
+@table @code
+@item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst)
+
+Called from @code{psymtab_to_symtab} (or the PSYMTAB_TO_SYMTAB macro) if
+the psymtab has not already been read in and had its @code{pst->symtab}
+pointer set.  The argument is the psymtab to be fleshed-out into a
+symtab.  Upon return, pst->readin should have been set to 1, and
+pst->symtab should contain a pointer to the new corresponding symtab, or
+zero if there were no symbols in that part of the symbol file.
+@end table
+
+@section Partial Symbol Tables
+
+GDB has three types of symbol tables.
+
+@itemize @bullet
+
+@item full symbol tables (symtabs).  These contain the main information
+about symbols and addresses.
+
+@item partial symbol tables (psymtabs).  These contain enough
+information to know when to read the corresponding part of the full
+symbol table.
+
+@item minimal symbol tables (msymtabs).  These contain information
+gleaned from non-debugging symbols.
+
+@end itemize
+
+This section describes partial symbol tables.
+
+A psymtab is constructed by doing a very quick pass over an executable
+file's debugging information.  Small amounts of information are
+extracted -- enough to identify which parts of the symbol table will
+need to be re-read and fully digested later, when the user needs the
+information.  The speed of this pass causes GDB to start up very
+quickly.  Later, as the detailed rereading occurs, it occurs in small
+pieces, at various times, and the delay therefrom is mostly invisible to
+the user.
+@c (@xref{Symbol Reading}.)
+
+The symbols that show up in a file's psymtab should be, roughly, those
+visible to the debugger's user when the program is not running code from
+that file.  These include external symbols and types, static symbols and
+types, and enum values declared at file scope.
+
+The psymtab also contains the range of instruction addresses that the
+full symbol table would represent.
+
+The idea is that there are only two ways for the user (or much of the
+code in the debugger) to reference a symbol:
+
+@itemize @bullet
+
+@item by its address
+(e.g. execution stops at some address which is inside a function in this
+file).  The address will be noticed to be in the range of this psymtab,
+and the full symtab will be read in.  @code{find_pc_function},
+@code{find_pc_line}, and other @code{find_pc_@dots{}} functions handle
+this.
+
+@item by its name
+(e.g. the user asks to print a variable, or set a breakpoint on a
+function).  Global names and file-scope names will be found in the
+psymtab, which will cause the symtab to be pulled in.  Local names will
+have to be qualified by a global name, or a file-scope name, in which
+case we will have already read in the symtab as we evaluated the
+qualifier.  Or, a local symbol can be referenced when we are "in" a
+local scope, in which case the first case applies.  @code{lookup_symbol}
+does most of the work here.
+
+@end itemize
+
+The only reason that psymtabs exist is to cause a symtab to be read in
+at the right moment.  Any symbol that can be elided from a psymtab,
+while still causing that to happen, should not appear in it.  Since
+psymtabs don't have the idea of scope, you can't put local symbols in
+them anyway.  Psymtabs don't have the idea of the type of a symbol,
+either, so types need not appear, unless they will be referenced by
+name.
+
+It is a bug for GDB to behave one way when only a psymtab has been read,
+and another way if the corresponding symtab has been read in.  Such bugs
+are typically caused by a psymtab that does not contain all the visible
+symbols, or which has the wrong instruction address ranges.
+
+The psymtab for a particular section of a symbol-file (objfile) could be
+thrown away after the symtab has been read in.  The symtab should always
+be searched before the psymtab, so the psymtab will never be used (in a
+bug-free environment).  Currently, psymtabs are allocated on an obstack,
+and all the psymbols themselves are allocated in a pair of large arrays
+on an obstack, so there is little to be gained by trying to free them
+unless you want to do a lot more work.
+
+@section Types
+
+Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
+
+These are the fundamental types that GDB uses internally.  Fundamental
+types from the various debugging formats (stabs, ELF, etc) are mapped
+into one of these.  They are basically a union of all fundamental types
+that gdb knows about for all the languages that GDB knows about.
+
+Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
+
+Each time GDB builds an internal type, it marks it with one of these
+types.  The type may be a fundamental type, such as TYPE_CODE_INT, or a
+derived type, such as TYPE_CODE_PTR which is a pointer to another type.
+Typically, several FT_* types map to one TYPE_CODE_* type, and are
+distinguished by other members of the type struct, such as whether the
+type is signed or unsigned, and how many bits it uses.
+
+Builtin Types (e.g., builtin_type_void, builtin_type_char).
+
+These are instances of type structs that roughly correspond to
+fundamental types and are created as global types for GDB to use for
+various ugly historical reasons.  We eventually want to eliminate these.
+Note for example that builtin_type_int initialized in gdbtypes.c is
+basically the same as a TYPE_CODE_INT type that is initialized in
+c-lang.c for an FT_INTEGER fundamental type.  The difference is that the
+builtin_type is not associated with any particular objfile, and only one
+instance exists, while c-lang.c builds as many TYPE_CODE_INT types as
+needed, with each one associated with some particular objfile.
+
+@section Object File Formats
+
+@subsection a.out
+
+The @file{a.out} format is the original file format for Unix.  It
+consists of three sections: text, data, and bss, which are for program
+code, initialized data, and uninitialized data, respectively.
+
+The @file{a.out} format is so simple that it doesn't have any reserved
+place for debugging information.  (Hey, the original Unix hackers used
+@file{adb}, which is a machine-language debugger.)  The only debugging
+format for @file{a.out} is stabs, which is encoded as a set of normal
+symbols with distinctive attributes.
+
+The basic @file{a.out} reader is in @file{dbxread.c}.
+
+@subsection COFF
+
+The COFF format was introduced with System V Release 3 (SVR3) Unix.
+COFF files may have multiple sections, each prefixed by a header.  The
+number of sections is limited.
+
+The COFF specification includes support for debugging.  Although this
+was a step forward, the debugging information was woefully limited.  For
+instance, it was not possible to represent code that came from an
+included file.
+
+The COFF reader is in @file{coffread.c}.
+
+@subsection ECOFF
+
+ECOFF is an extended COFF originally introduced for Mips and Alpha
+workstations.
+
+The basic ECOFF reader is in @file{mipsread.c}.
+
+@subsection XCOFF
+
+The IBM RS/6000 running AIX uses an object file format called XCOFF.
+The COFF sections, symbols, and line numbers are used, but debugging
+symbols are dbx-style stabs whose strings are located in the
+@samp{.debug} section (rather than the string table).  For more
+information, see @xref{Top,,,stabs,The Stabs Debugging Format}.
+
+The shared library scheme has a clean interface for figuring out what
+shared libraries are in use, but the catch is that everything which
+refers to addresses (symbol tables and breakpoints at least) needs to be
+relocated for both shared libraries and the main executable.  At least
+using the standard mechanism this can only be done once the program has
+been run (or the core file has been read).
+
+@subsection PE
+
+Windows 95 and NT use the PE (Portable Executable) format for their
+executables.  PE is basically COFF with additional headers.
+
+While BFD includes special PE support, GDB needs only the basic
+COFF reader.
+
+@subsection ELF
+
+The ELF format came with System V Release 4 (SVR4) Unix.  ELF is similar
+to COFF in being organized into a number of sections, but it removes
+many of COFF's limitations.
+
+The basic ELF reader is in @file{elfread.c}.
+
+@subsection SOM
+
+SOM is HP's object file and debug format (not to be confused with IBM's
+SOM, which is a cross-language ABI).
+
+The SOM reader is in @file{hpread.c}.
+
+@subsection Other File Formats
+
+Other file formats that have been supported by GDB include Netware
+Loadable Modules (@file{nlmread.c}.
+
+@section Debugging File Formats
+
+This section describes characteristics of debugging information that
+are independent of the object file format.
+
+@subsection stabs
+
+@code{stabs} started out as special symbols within the @code{a.out}
+format.  Since then, it has been encapsulated into other file
+formats, such as COFF and ELF.
+
+While @file{dbxread.c} does some of the basic stab processing,
+including for encapsulated versions, @file{stabsread.c} does
+the real work.
+
+@subsection COFF
+
+The basic COFF definition includes debugging information.  The level
+of support is minimal and non-extensible, and is not often used.
+
+@subsection Mips debug (Third Eye)
+
+ECOFF includes a definition of a special debug format.
+
+The file @file{mdebugread.c} implements reading for this format.
+
+@subsection DWARF 1
+
+DWARF 1 is a debugging format that was originally designed to be
+used with ELF in SVR4 systems.
+
+@c CHILL_PRODUCER
+@c GCC_PRODUCER
+@c GPLUS_PRODUCER
+@c LCC_PRODUCER
+@c If defined, these are the producer strings in a DWARF 1 file.  All of
+@c these have reasonable defaults already.
+
+The DWARF 1 reader is in @file{dwarfread.c}.
+
+@subsection DWARF 2
+
+DWARF 2 is an improved but incompatible version of DWARF 1.
+
+The DWARF 2 reader is in @file{dwarf2read.c}.
+
+@subsection SOM
+
+Like COFF, the SOM definition includes debugging information.
+
+@section Adding a New Symbol Reader to GDB
+
+If you are using an existing object file format (a.out, COFF, ELF, etc),
+there is probably little to be done.
+
+If you need to add a new object file format, you must first add it to
+BFD.  This is beyond the scope of this document.
+
+You must then arrange for the BFD code to provide access to the
+debugging symbols.  Generally GDB will have to call swapping routines
+from BFD and a few other BFD internal routines to locate the debugging
+information.  As much as possible, GDB should not depend on the BFD
+internal data structures.
+
+For some targets (e.g., COFF), there is a special transfer vector used
+to call swapping routines, since the external data structures on various
+platforms have different sizes and layouts.  Specialized routines that
+will only ever be implemented by one object file format may be called
+directly.  This interface should be described in a file
+@file{bfd/libxyz.h}, which is included by GDB.
+
+
+@node Language Support
+
+@chapter Language Support
+
+GDB's language support is mainly driven by the symbol reader, although
+it is possible for the user to set the source language manually.
+
+GDB chooses the source language by looking at the extension of the file
+recorded in the debug info; @code{.c} means C, @code{.f} means Fortran,
+etc.  It may also use a special-purpose language identifier if the debug
+format supports it, such as DWARF.
+
+@section Adding a Source Language to GDB
+
+To add other languages to GDB's expression parser, follow the following
+steps:
+
+@table @emph
+@item Create the expression parser.
+
+This should reside in a file @file{@var{lang}-exp.y}.  Routines for
+building parsed expressions into a @samp{union exp_element} list are in
+@file{parse.c}.
+
+Since we can't depend upon everyone having Bison, and YACC produces
+parsers that define a bunch of global names, the following lines
+@emph{must} be included at the top of the YACC parser, to prevent the
+various parsers from defining the same global names:
+
+@example
+#define yyparse 	@var{lang}_parse
+#define yylex 	@var{lang}_lex
+#define yyerror 	@var{lang}_error
+#define yylval 	@var{lang}_lval
+#define yychar 	@var{lang}_char
+#define yydebug 	@var{lang}_debug
+#define yypact  	@var{lang}_pact 
+#define yyr1		@var{lang}_r1   
+#define yyr2		@var{lang}_r2   
+#define yydef		@var{lang}_def  
+#define yychk		@var{lang}_chk  
+#define yypgo		@var{lang}_pgo  
+#define yyact  	@var{lang}_act  
+#define yyexca  	@var{lang}_exca
+#define yyerrflag  	@var{lang}_errflag
+#define yynerrs  	@var{lang}_nerrs
+@end example
+
+At the bottom of your parser, define a @code{struct language_defn} and
+initialize it with the right values for your language.  Define an
+@code{initialize_@var{lang}} routine and have it call
+@samp{add_language(@var{lang}_language_defn)} to tell the rest of GDB
+that your language exists.  You'll need some other supporting variables
+and functions, which will be used via pointers from your
+@code{@var{lang}_language_defn}.  See the declaration of @code{struct
+language_defn} in @file{language.h}, and the other @file{*-exp.y} files,
+for more information.
+
+@item Add any evaluation routines, if necessary
+
+If you need new opcodes (that represent the operations of the language),
+add them to the enumerated type in @file{expression.h}.  Add support
+code for these operations in @code{eval.c:evaluate_subexp()}.  Add cases
+for new opcodes in two functions from @file{parse.c}:
+@code{prefixify_subexp()} and @code{length_of_subexp()}.  These compute
+the number of @code{exp_element}s that a given operation takes up.
+
+@item Update some existing code
+
+Add an enumerated identifier for your language to the enumerated type
+@code{enum language} in @file{defs.h}.
+
+Update the routines in @file{language.c} so your language is included.
+These routines include type predicates and such, which (in some cases)
+are language dependent.  If your language does not appear in the switch
+statement, an error is reported.
+
+Also included in @file{language.c} is the code that updates the variable
+@code{current_language}, and the routines that translate the
+@code{language_@var{lang}} enumerated identifier into a printable
+string.
+
+Update the function @code{_initialize_language} to include your
+language.  This function picks the default language upon startup, so is
+dependent upon which languages that GDB is built for.
+
+Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading
+code so that the language of each symtab (source file) is set properly.
+This is used to determine the language to use at each stack frame level.
+Currently, the language is set based upon the extension of the source
+file.  If the language can be better inferred from the symbol
+information, please set the language of the symtab in the symbol-reading
+code.
+
+Add helper code to @code{expprint.c:print_subexp()} to handle any new
+expression opcodes you have added to @file{expression.h}.  Also, add the
+printed representations of your operators to @code{op_print_tab}.
+
+@item Add a place of call
+
+Add a call to @code{@var{lang}_parse()} and @code{@var{lang}_error} in
+@code{parse.c:parse_exp_1()}.
+
+@item Use macros to trim code
+
+The user has the option of building GDB for some or all of the
+languages.  If the user decides to build GDB for the language
+@var{lang}, then every file dependent on @file{language.h} will have the
+macro @code{_LANG_@var{lang}} defined in it.  Use @code{#ifdef}s to
+leave out large routines that the user won't need if he or she is not
+using your language.
+
+Note that you do not need to do this in your YACC parser, since if GDB
+is not build for @var{lang}, then @file{@var{lang}-exp.tab.o} (the
+compiled form of your parser) is not linked into GDB at all.
+
+See the file @file{configure.in} for how GDB is configured for different
+languages.
+
+@item Edit @file{Makefile.in}
+
+Add dependencies in @file{Makefile.in}.  Make sure you update the macro
+variables such as @code{HFILES} and @code{OBJS}, otherwise your code may
+not get linked in, or, worse yet, it may not get @code{tar}red into the
+distribution!
+
+@end table
+
+
+@node Host Definition
+
+@chapter Host Definition
+
+With the advent of autoconf, it's rarely necessary to have host
+definition machinery anymore.
+
+@section Adding a New Host
+
+Most of GDB's host configuration support happens via autoconf.  It
+should be rare to need new host-specific definitions.  GDB still uses
+the host-specific definitions and files listed below, but these mostly
+exist for historical reasons, and should eventually disappear.
+
+Several files control GDB's configuration for host systems:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting on machine @var{xyz}.
+In particular, this lists the required machine-dependent object files,
+by defining @samp{XDEPFILES=@dots{}}.  Also specifies the header file
+which describes host @var{xyz}, by defining @code{XM_FILE=
+xm-@var{xyz}.h}.  You can also define @code{CC}, @code{SYSV_DEFINE},
+@code{XM_CFLAGS}, @code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS},
+etc.; see @file{Makefile.in}.
+
+@item gdb/config/@var{arch}/xm-@var{xyz}.h
+(@file{xm.h} is a link to this file, created by configure).  Contains C
+macro definitions describing the host system environment, such as byte
+order, host C compiler and library.
+
+@item gdb/@var{xyz}-xdep.c
+Contains any miscellaneous C code required for this machine as a host.
+On most machines it doesn't exist at all.  If it does exist, put
+@file{@var{xyz}-xdep.o} into the @code{XDEPFILES} line in
+@file{gdb/config/@var{arch}/@var{xyz}.mh}.
+
+@end table
+
+@subheading Generic Host Support Files
+
+There are some ``generic'' versions of routines that can be used by
+various systems.  These can be customized in various ways by macros
+defined in your @file{xm-@var{xyz}.h} file.  If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.
+
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o}
+into @code{XDEPFILES}.
+
+@table @file
+
+@item ser-unix.c
+This contains serial line support for Unix systems.  This is always
+included, via the makefile variable @code{SER_HARDWIRE}; override this
+variable in the @file{.mh} file to avoid it.
+
+@item ser-go32.c
+This contains serial line support for 32-bit programs running under DOS,
+using the GO32 execution environment.
+
+@item ser-tcp.c
+This contains generic TCP support using sockets.
+
+@end table
+
+@section Host Conditionals
+
+When GDB is configured and compiled, various macros are defined or left
+undefined, to control compilation based on the attributes of the host
+system.  These macros and their meanings (or if the meaning is not
+documented here, then one of the source files where they are used is
+indicated) are:
+
+@table @code
+
+@item GDBINIT_FILENAME
+The default name of GDB's initialization file (normally @file{.gdbinit}).
+
+@item MEM_FNS_DECLARED
+Your host config file defines this if it includes declarations of
+@code{memcpy} and @code{memset}.  Define this to avoid conflicts between
+the native include files and the declarations in @file{defs.h}.
+
+@item NO_SYS_FILE
+Define this if your system does not have a @code{<sys/file.h>}.
+
+@item SIGWINCH_HANDLER
+If your host defines @code{SIGWINCH}, you can define this to be the name
+of a function to be called if @code{SIGWINCH} is received.
+
+@item SIGWINCH_HANDLER_BODY
+Define this to expand into code that will define the function named by
+the expansion of @code{SIGWINCH_HANDLER}.
+
+@item ALIGN_STACK_ON_STARTUP
+Define this if your system is of a sort that will crash in
+@code{tgetent} if the stack happens not to be longword-aligned when
+@code{main} is called.  This is a rare situation, but is known to occur
+on several different types of systems.
+
+@item CRLF_SOURCE_FILES
+Define this if host files use @code{\r\n} rather than @code{\n} as a
+line terminator.  This will cause source file listings to omit @code{\r}
+characters when printing and it will allow \r\n line endings of files
+which are "sourced" by gdb.  It must be possible to open files in binary
+mode using @code{O_BINARY} or, for fopen, @code{"rb"}.
+
+@item DEFAULT_PROMPT
+The default value of the prompt string (normally @code{"(gdb) "}).
+
+@item DEV_TTY
+The name of the generic TTY device, defaults to @code{"/dev/tty"}.
+
+@item FCLOSE_PROVIDED
+Define this if the system declares @code{fclose} in the headers included
+in @code{defs.h}.  This isn't needed unless your compiler is unusually
+anal.
+
+@item FOPEN_RB
+Define this if binary files are opened the same way as text files.
+
+@item GETENV_PROVIDED
+Define this if the system declares @code{getenv} in its headers included
+in @code{defs.h}. This isn't needed unless your compiler is unusually
+anal.
+
+@item HAVE_MMAP
+In some cases, use the system call @code{mmap} for reading symbol
+tables.  For some machines this allows for sharing and quick updates.
+
+@item HAVE_SIGSETMASK
+Define this if the host system has job control, but does not define
+@code{sigsetmask()}.  Currently, this is only true of the RS/6000.
+
+@item HAVE_TERMIO
+Define this if the host system has @code{termio.h}.
+
+@item HOST_BYTE_ORDER
+The ordering of bytes in the host.  This must be defined to be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
+
+@item INT_MAX
+@item INT_MIN
+@item LONG_MAX
+@item UINT_MAX
+@item ULONG_MAX
+Values for host-side constants.
+
+@item ISATTY
+Substitute for isatty, if not available.
+
+@item LONGEST
+This is the longest integer type available on the host.  If not defined,
+it will default to @code{long long} or @code{long}, depending on
+@code{CC_HAS_LONG_LONG}.
+
+@item CC_HAS_LONG_LONG
+Define this if the host C compiler supports ``long long''.  This is set
+by the configure script.
+
+@item PRINTF_HAS_LONG_LONG
+Define this if the host can handle printing of long long integers via
+the printf format directive ``ll''. This is set by the configure script.
+
+@item HAVE_LONG_DOUBLE
+Define this if the host C compiler supports ``long double''.  This is
+set by the configure script.
+
+@item PRINTF_HAS_LONG_DOUBLE
+Define this if the host can handle printing of long double float-point
+numbers via the printf format directive ``Lg''. This is set by the
+configure script.
+
+@item SCANF_HAS_LONG_DOUBLE
+Define this if the host can handle the parsing of long double
+float-point numbers via the scanf format directive directive
+``Lg''. This is set by the configure script.
+
+@item LSEEK_NOT_LINEAR
+Define this if @code{lseek (n)} does not necessarily move to byte number
+@code{n} in the file.  This is only used when reading source files.  It
+is normally faster to define @code{CRLF_SOURCE_FILES} when possible.
+
+@item L_SET
+This macro is used as the argument to lseek (or, most commonly,
+bfd_seek).  FIXME, should be replaced by SEEK_SET instead, which is the
+POSIX equivalent.
+
+@item MAINTENANCE_CMDS
+If the value of this is 1, then a number of optional maintenance
+commands are compiled in.
+
+@item MALLOC_INCOMPATIBLE
+Define this if the system's prototype for @code{malloc} differs from the
+@sc{ANSI} definition.
+
+@item MMAP_BASE_ADDRESS
+When using HAVE_MMAP, the first mapping should go at this address.
+
+@item MMAP_INCREMENT
+when using HAVE_MMAP, this is the increment between mappings.
+
+@item NEED_POSIX_SETPGID
+Define this to use the POSIX version of @code{setpgid} to determine
+whether job control is available.
+
+@item NORETURN
+If defined, this should be one or more tokens, such as @code{volatile},
+that can be used in both the declaration and definition of functions to
+indicate that they never return.  The default is already set correctly
+if compiling with GCC.  This will almost never need to be defined.
+
+@item ATTR_NORETURN
+If defined, this should be one or more tokens, such as
+@code{__attribute__ ((noreturn))}, that can be used in the declarations
+of functions to indicate that they never return.  The default is already
+set correctly if compiling with GCC.  This will almost never need to be
+defined.
+
+@item USE_MMALLOC
+GDB will use the @code{mmalloc} library for memory allocation for symbol
+reading if this symbol is defined.  Be careful defining it since there
+are systems on which @code{mmalloc} does not work for some reason.  One
+example is the DECstation, where its RPC library can't cope with our
+redefinition of @code{malloc} to call @code{mmalloc}.  When defining
+@code{USE_MMALLOC}, you will also have to set @code{MMALLOC} in the
+Makefile, to point to the mmalloc library.  This define is set when you
+configure with --with-mmalloc.
+
+@item NO_MMCHECK
+Define this if you are using @code{mmalloc}, but don't want the overhead
+of checking the heap with @code{mmcheck}.  Note that on some systems,
+the C runtime makes calls to malloc prior to calling @code{main}, and if
+@code{free} is ever called with these pointers after calling
+@code{mmcheck} to enable checking, a memory corruption abort is certain
+to occur.  These systems can still use mmalloc, but must define
+NO_MMCHECK.
+
+@item MMCHECK_FORCE
+Define this to 1 if the C runtime allocates memory prior to
+@code{mmcheck} being called, but that memory is never freed so we don't
+have to worry about it triggering a memory corruption abort.  The
+default is 0, which means that @code{mmcheck} will only install the heap
+checking functions if there has not yet been any memory allocation
+calls, and if it fails to install the functions, gdb will issue a
+warning.  This is currently defined if you configure using
+--with-mmalloc.
+
+@item NO_SIGINTERRUPT
+Define this to indicate that siginterrupt() is not available.
+
+@item R_OK
+Define if this is not in a system .h file.
+
+@item SEEK_CUR
+@item SEEK_SET
+Define these to appropriate value for the system lseek(), if not already
+defined.
+
+@item STOP_SIGNAL
+This is the signal for stopping GDB.  Defaults to SIGTSTP.  (Only
+redefined for the Convex.)
+
+@item USE_O_NOCTTY
+Define this if the interior's tty should be opened with the O_NOCTTY
+flag.  (FIXME: This should be a native-only flag, but @file{inflow.c} is
+always linked in.)
+
+@item USG
+Means that System V (prior to SVR4) include files are in use.  (FIXME:
+This symbol is abused in @file{infrun.c}, @file{regex.c},
+@file{remote-nindy.c}, and @file{utils.c} for other things, at the
+moment.)
+
+@item lint
+Define this to help placate lint in some situations.
+
+@item volatile
+Define this to override the defaults of @code{__volatile__} or
+@code{/**/}.
+
+@end table
+
+
+@node Target Architecture Definition
+
+@chapter Target Architecture Definition
+
+GDB's target architecture defines what sort of machine-language programs
+GDB can work with, and how it works with them.
+
+At present, the target architecture definition consists of a number of C
+macros.
+
+@section Registers and Memory
+
+GDB's model of the target machine is rather simple.  GDB assumes the
+machine includes a bank of registers and a block of memory.  Each
+register may have a different size.
+
+GDB does not have a magical way to match up with the compiler's idea of
+which registers are which; however, it is critical that they do match up
+accurately.  The only way to make this work is to get accurate
+information about the order that the compiler uses, and to reflect that
+in the @code{REGISTER_NAME} and related macros.
+
+GDB can handle big-endian, little-endian, and bi-endian architectures.
+
+@section Frame Interpretation
+
+@section Inferior Call Setup
+
+@section Compiler Characteristics
+
+@section Target Conditionals
+
+This section describes the macros that you can use to define the target
+machine.
+
+@table @code
+
+@item ADDITIONAL_OPTIONS
+@item ADDITIONAL_OPTION_CASES
+@item ADDITIONAL_OPTION_HANDLER
+@item ADDITIONAL_OPTION_HELP
+These are a set of macros that allow the addition of additional command
+line options to GDB.  They are currently used only for the unsupported
+i960 Nindy target, and should not be used in any other configuration.
+
+@item ADDR_BITS_REMOVE (addr)
+If a raw machine address includes any bits that are not really part of
+the address, then define this macro to expand into an expression that
+zeros those bits in @var{addr}.  For example, the two low-order bits of
+a Motorola 88K address may be used by some kernels for their own
+purposes, since addresses must always be 4-byte aligned, and so are of
+no use for addressing.  Those bits should be filtered out with an
+expression such as @code{((addr) & ~3)}.
+
+@item BEFORE_MAIN_LOOP_HOOK
+Define this to expand into any code that you want to execute before the
+main loop starts.  Although this is not, strictly speaking, a target
+conditional, that is how it is currently being used.  Note that if a
+configuration were to define it one way for a host and a different way
+for the target, GDB will probably not compile, let alone run correctly.
+This is currently used only for the unsupported i960 Nindy target, and
+should not be used in any other configuration.
+
+@item BELIEVE_PCC_PROMOTION
+Define if the compiler promotes a short or char parameter to an int, but
+still reports the parameter as its original type, rather than the
+promoted type.
+
+@item BELIEVE_PCC_PROMOTION_TYPE
+Define this if GDB should believe the type of a short argument when
+compiled by pcc, but look within a full int space to get its value.
+Only defined for Sun-3 at present.
+
+@item BITS_BIG_ENDIAN
+Define this if the numbering of bits in the targets does *not* match the
+endianness of the target byte order.  A value of 1 means that the bits
+are numbered in a big-endian order, 0 means little-endian.
+
+@item BREAKPOINT
+This is the character array initializer for the bit pattern to put into
+memory where a breakpoint is set.  Although it's common to use a trap
+instruction for a breakpoint, it's not required; for instance, the bit
+pattern could be an invalid instruction.  The breakpoint must be no
+longer than the shortest instruction of the architecture.
+
+@item BIG_BREAKPOINT
+@item LITTLE_BREAKPOINT
+Similar to BREAKPOINT, but used for bi-endian targets.
+
+@item REMOTE_BREAKPOINT
+@item LITTLE_REMOTE_BREAKPOINT
+@item BIG_REMOTE_BREAKPOINT
+Similar to BREAKPOINT, but used for remote targets.
+
+@item BREAKPOINT_FROM_PC (pcptr, lenptr)
+
+Use the program counter to determine the contents and size of a
+breakpoint instruction.  It returns a pointer to a string of bytes that
+encode a breakpoint instruction, stores the length of the string to
+*lenptr, and adjusts pc (if necessary) to point to the actual memory
+location where the breakpoint should be inserted.
+
+Although it is common to use a trap instruction for a breakpoint, it's
+not required; for instance, the bit pattern could be an invalid
+instruction.  The breakpoint must be no longer than the shortest
+instruction of the architecture.
+
+Replaces all the other BREAKPOINTs.
+
+@item CALL_DUMMY
+valops.c
+@item CALL_DUMMY_LOCATION
+inferior.h
+@item CALL_DUMMY_STACK_ADJUST
+valops.c
+
+@item CANNOT_FETCH_REGISTER (regno)
+A C expression that should be nonzero if @var{regno} cannot be fetched
+from an inferior process.  This is only relevant if
+@code{FETCH_INFERIOR_REGISTERS} is not defined.
+
+@item CANNOT_STORE_REGISTER (regno)
+A C expression that should be nonzero if @var{regno} should not be
+written to the target.  This is often the case for program counters,
+status words, and other special registers.  If this is not defined, GDB
+will assume that all registers may be written.
+
+@item DO_DEFERRED_STORES
+@item CLEAR_DEFERRED_STORES
+Define this to execute any deferred stores of registers into the inferior,
+and to cancel any deferred stores.
+
+Currently only implemented correctly for native Sparc configurations?
+
+@item CPLUS_MARKER
+Define this to expand into the character that G++ uses to distinguish
+compiler-generated identifiers from programmer-specified identifiers.
+By default, this expands into @code{'$'}.  Most System V targets should
+define this to @code{'.'}.
+
+@item DBX_PARM_SYMBOL_CLASS
+Hook for the @code{SYMBOL_CLASS} of a parameter when decoding DBX symbol
+information.  In the i960, parameters can be stored as locals or as
+args, depending on the type of the debug record.
+
+@item DECR_PC_AFTER_BREAK
+Define this to be the amount by which to decrement the PC after the
+program encounters a breakpoint.  This is often the number of bytes in
+BREAKPOINT, though not always.  For most targets this value will be 0.
+
+@item DECR_PC_AFTER_HW_BREAK
+Similarly, for hardware breakpoints.
+
+@item DISABLE_UNSETTABLE_BREAK addr
+If defined, this should evaluate to 1 if @var{addr} is in a shared
+library in which breakpoints cannot be set and so should be disabled.
+
+@item DO_REGISTERS_INFO
+If defined, use this to print the value of a register or all registers.
+
+@item END_OF_TEXT_DEFAULT
+This is an expression that should designate the end of the text section
+(? FIXME ?)
+
+@item EXTRACT_RETURN_VALUE(type,regbuf,valbuf)
+Define this to extract a function's return value of type @var{type} from
+the raw register state @var{regbuf} and copy that, in virtual format,
+into @var{valbuf}.
+ 
+@item EXTRACT_STRUCT_VALUE_ADDRESS(regbuf)
+Define this to extract from an array @var{regbuf} containing the (raw)
+register state, the address in which a function should return its
+structure value, as a CORE_ADDR (or an expression that can be used as
+one).
+
+@item FLOAT_INFO
+If defined, then the `info float' command will print information about
+the processor's floating point unit.
+
+@item FP_REGNUM
+The number of the frame pointer register.
+
+@item FRAMELESS_FUNCTION_INVOCATION(fi, frameless)
+Define this to set the variable @var{frameless} to 1 if the function
+invocation represented by @var{fi} does not have a stack frame
+associated with it.  Otherwise set it to 0.
+
+@item FRAME_ARGS_ADDRESS_CORRECT
+stack.c
+
+@item FRAME_CHAIN(frame)
+Given @var{frame}, return a pointer to the calling frame.
+
+@item FRAME_CHAIN_COMBINE(chain,frame)
+Define this to take the frame chain pointer and the frame's nominal
+address and produce the nominal address of the caller's frame.
+Presently only defined for HP PA.
+
+@item FRAME_CHAIN_VALID(chain,thisframe)
+
+Define this to be an expression that returns zero if the given frame is
+an outermost frame, with no caller, and nonzero otherwise.  Three common
+definitions are available. @code{default_frame_chain_valid} (the
+default) is nonzero if the chain pointer is nonzero and given frame's PC
+is not inside the startup file (such as @file{crt0.o}).
+@code{alternate_frame_chain_valid} is nonzero if the chain pointer is
+nonzero and the given frame's PC is not in @code{main()} or a known
+entry point function (such as @code{_start()}).
+
+@item FRAME_INIT_SAVED_REGS(frame)
+See @file{frame.h}.  Determines the address of all registers in the
+current stack frame storing each in @code{frame->saved_regs}.  Space for
+@code{frame->saved_regs} shall be allocated by
+@code{FRAME_INIT_SAVED_REGS} using either
+@code{frame_saved_regs_zalloc} or @code{frame_obstack_alloc}.
+
+@var{FRAME_FIND_SAVED_REGS} and @var{EXTRA_FRAME_INFO} are deprecated.
+
+@item FRAME_NUM_ARGS (val, fi)
+For the frame described by @var{fi}, set @var{val} to the number of arguments
+that are being passed.
+
+@item FRAME_SAVED_PC(frame)
+Given @var{frame}, return the pc saved there.  That is, the return
+address.
+
+@item FUNCTION_EPILOGUE_SIZE
+For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the
+function end symbol is 0.  For such targets, you must define
+@code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a
+function's epilogue.
+
+@item GCC_COMPILED_FLAG_SYMBOL
+@item GCC2_COMPILED_FLAG_SYMBOL
+If defined, these are the names of the symbols that GDB will look for to
+detect that GCC compiled the file.  The default symbols are
+@code{gcc_compiled.} and @code{gcc2_compiled.}, respectively. (Currently
+only defined for the Delta 68.)
+
+@item GDB_TARGET_IS_HPPA
+This determines whether horrible kludge code in dbxread.c and
+partial-stab.h is used to mangle multiple-symbol-table files from
+HPPA's.  This should all be ripped out, and a scheme like elfread.c
+used.
+
+@item GDB_TARGET_IS_MACH386
+@item GDB_TARGET_IS_SUN3
+@item GDB_TARGET_IS_SUN386
+Kludges that should go away.
+
+@item GET_LONGJMP_TARGET
+For most machines, this is a target-dependent parameter.  On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
+
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint.  It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer.  It examines the current state of the machine as needed.
+
+@item GET_SAVED_REGISTER
+Define this if you need to supply your own definition for the function
+@code{get_saved_register}.  Currently this is only done for the a29k.
+
+@item HAVE_REGISTER_WINDOWS
+Define this if the target has register windows.
+@item REGISTER_IN_WINDOW_P (regnum)
+Define this to be an expression that is 1 if the given register is in
+the window.
+
+@item IBM6000_TARGET
+Shows that we are configured for an IBM RS/6000 target.  This
+conditional should be eliminated (FIXME) and replaced by
+feature-specific macros.  It was introduced in haste and we are
+repenting at leisure.
+
+@item IEEE_FLOAT
+Define this if the target system uses IEEE-format floating point numbers.
+
+@item INIT_EXTRA_FRAME_INFO (fromleaf, frame)
+If additional information about the frame is required this should be
+stored in @code{frame->extra_info}.  Space for @code{frame->extra_info}
+is allocated using @code{frame_obstack_alloc}.
+
+@item INIT_FRAME_PC (fromleaf, prev)
+This is a C statement that sets the pc of the frame pointed to by
+@var{prev}.  [By default...]
+
+@item INNER_THAN (lhs,rhs)
+Returns non-zero if stack address @var{lhs} is inner than (nearer to the
+stack top) stack address @var{rhs}. Define this as @code{lhs < rhs} if
+the target's stack grows downward in memory, or @code{lhs > rsh} if the
+stack grows upward.
+
+@item IN_SIGTRAMP (pc, name)
+Define this to return true if the given @var{pc} and/or @var{name}
+indicates that the current function is a sigtramp.
+
+@item SIGTRAMP_START (pc)
+@item SIGTRAMP_END (pc)
+Define these to be the start and end address of the sigtramp for the
+given @var{pc}.  On machines where the address is just a compile time
+constant, the macro expansion will typically just ignore the supplied
+@var{pc}.
+
+@item IN_SOLIB_CALL_TRAMPOLINE pc name
+Define this to evaluate to nonzero if the program is stopped in the
+trampoline that connects to a shared library.
+
+@item IN_SOLIB_RETURN_TRAMPOLINE pc name
+Define this to evaluate to nonzero if the program is stopped in the
+trampoline that returns from a shared library.
+
+@item IS_TRAPPED_INTERNALVAR (name)
+This is an ugly hook to allow the specification of special actions that
+should occur as a side-effect of setting the value of a variable
+internal to GDB.  Currently only used by the h8500.  Note that this
+could be either a host or target conditional.
+
+@item NEED_TEXT_START_END
+Define this if GDB should determine the start and end addresses of the
+text section.  (Seems dubious.)
+
+@item NO_HIF_SUPPORT
+(Specific to the a29k.)
+
+@item SOFTWARE_SINGLE_STEP_P
+Define this as 1 if the target does not have a hardware single-step
+mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined.
+
+@item SOFTWARE_SINGLE_STEP(signal,insert_breapoints_p)
+A function that inserts or removes (dependant on
+@var{insert_breapoints_p}) breakpoints at each possible destinations of
+the next instruction. See @code{sparc-tdep.c} and @code{rs6000-tdep.c}
+for examples.
+
+@item PCC_SOL_BROKEN
+(Used only in the Convex target.)
+
+@item PC_IN_CALL_DUMMY
+inferior.h
+
+@item PC_LOAD_SEGMENT
+If defined, print information about the load segment for the program
+counter.  (Defined only for the RS/6000.)
+
+@item PC_REGNUM
+If the program counter is kept in a register, then define this macro to
+be the number of that register.  This need be defined only if
+@code{TARGET_WRITE_PC} is not defined.
+
+@item NPC_REGNUM
+The number of the ``next program counter'' register, if defined.
+
+@item NNPC_REGNUM
+The number of the ``next next program counter'' register, if defined.
+Currently, this is only defined for the Motorola 88K.
+
+@item PRINT_REGISTER_HOOK (regno)
+If defined, this must be a function that prints the contents of the
+given register to standard output.
+
+@item PRINT_TYPELESS_INTEGER
+This is an obscure substitute for @code{print_longest} that seems to
+have been defined for the Convex target.
+
+@item PROCESS_LINENUMBER_HOOK
+A hook defined for XCOFF reading.
+
+@item PROLOGUE_FIRSTLINE_OVERLAP
+(Only used in unsupported Convex configuration.)
+
+@item PS_REGNUM
+If defined, this is the number of the processor status register.  (This
+definition is only used in generic code when parsing "$ps".)
+
+@item POP_FRAME
+Used in @samp{call_function_by_hand} to remove an artificial stack
+frame.
+
+@item PUSH_ARGUMENTS (nargs, args, sp, struct_return, struct_addr)
+Define this to push arguments onto the stack for inferior function call.
+
+@item PUSH_DUMMY_FRAME
+Used in @samp{call_function_by_hand} to create an artificial stack frame.
+
+@item REGISTER_BYTES
+The total amount of space needed to store GDB's copy of the machine's
+register state.
+
+@item REGISTER_NAME(i)
+Return the name of register @var{i} as a string.  May return @var{NULL}
+or @var{NUL} to indicate that register @var{i} is not valid.
+
+@item REG_STRUCT_HAS_ADDR (gcc_p, type)
+Define this to return 1 if the given type will be passed by pointer
+rather than directly.
+
+@item SDB_REG_TO_REGNUM
+Define this to convert sdb register numbers into GDB regnums.  If not
+defined, no conversion will be done.
+
+@item SHIFT_INST_REGS
+(Only used for m88k targets.)
+
+@item SKIP_PROLOGUE (pc)
+A C statement that advances the @var{pc} across any function entry
+prologue instructions so as to reach ``real'' code.
+
+@item SKIP_PROLOGUE_FRAMELESS_P
+A C statement that should behave similarly, but that can stop as soon as
+the function is known to have a frame.  If not defined,
+@code{SKIP_PROLOGUE} will be used instead.
+
+@item SKIP_TRAMPOLINE_CODE (pc)
+If the target machine has trampoline code that sits between callers and
+the functions being called, then define this macro to return a new PC
+that is at the start of the real function.
+
+@item SP_REGNUM
+Define this to be the number of the register that serves as the stack
+pointer.
+
+@item STAB_REG_TO_REGNUM
+Define this to convert stab register numbers (as gotten from `r'
+declarations) into GDB regnums.  If not defined, no conversion will be
+done.
+
+@item STACK_ALIGN (addr)
+Define this to adjust the address to the alignment required for the
+processor's stack.
+
+@item STEP_SKIPS_DELAY (addr)
+Define this to return true if the address is of an instruction with a
+delay slot.  If a breakpoint has been placed in the instruction's delay
+slot, GDB will single-step over that instruction before resuming
+normally.  Currently only defined for the Mips.
+
+@item STORE_RETURN_VALUE (type, valbuf)
+A C expression that stores a function return value of type @var{type},
+where @var{valbuf} is the address of the value to be stored.
+
+@item SUN_FIXED_LBRAC_BUG
+(Used only for Sun-3 and Sun-4 targets.)
+
+@item SYMBOL_RELOADING_DEFAULT
+The default value of the `symbol-reloading' variable.  (Never defined in
+current sources.)
+
+@item TARGET_BYTE_ORDER_DEFAULT
+The ordering of bytes in the target.  This must be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.  This macro replaces
+@var{TARGET_BYTE_ORDER} which is deprecated.
+
+@item TARGET_BYTE_ORDER_SELECTABLE_P
+Non-zero if the target has both @code{BIG_ENDIAN} and
+@code{LITTLE_ENDIAN} variants.  This macro replaces
+@var{TARGET_BYTE_ORDER_SELECTABLE} which is deprecated.
+
+@item TARGET_CHAR_BIT
+Number of bits in a char; defaults to 8.
+
+@item TARGET_COMPLEX_BIT
+Number of bits in a complex number; defaults to @code{2 * TARGET_FLOAT_BIT}.
+
+@item TARGET_DOUBLE_BIT
+Number of bits in a double float; defaults to @code{8 * TARGET_CHAR_BIT}.
+
+@item TARGET_DOUBLE_COMPLEX_BIT
+Number of bits in a double complex; defaults to @code{2 * TARGET_DOUBLE_BIT}.
+
+@item TARGET_FLOAT_BIT
+Number of bits in a float; defaults to @code{4 * TARGET_CHAR_BIT}.
+
+@item TARGET_INT_BIT
+Number of bits in an integer; defaults to @code{4 * TARGET_CHAR_BIT}.
+
+@item TARGET_LONG_BIT
+Number of bits in a long integer; defaults to @code{4 * TARGET_CHAR_BIT}.
+
+@item TARGET_LONG_DOUBLE_BIT
+Number of bits in a long double float;
+defaults to @code{2 * TARGET_DOUBLE_BIT}.
+
+@item TARGET_LONG_LONG_BIT
+Number of bits in a long long integer; defaults to @code{2 * TARGET_LONG_BIT}.
+
+@item TARGET_PTR_BIT
+Number of bits in a pointer; defaults to @code{TARGET_INT_BIT}.
+
+@item TARGET_SHORT_BIT
+Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}.
+
+@item TARGET_READ_PC
+@item TARGET_WRITE_PC (val, pid)
+@item TARGET_READ_SP
+@item TARGET_WRITE_SP
+@item TARGET_READ_FP
+@item TARGET_WRITE_FP
+These change the behavior of @code{read_pc}, @code{write_pc},
+@code{read_sp}, @code{write_sp}, @code{read_fp} and @code{write_fp}.
+For most targets, these may be left undefined.  GDB will call the read
+and write register functions with the relevant @code{_REGNUM} argument.
+
+These macros are useful when a target keeps one of these registers in a
+hard to get at place; for example, part in a segment register and part
+in an ordinary register.
+
+@item TARGET_VIRTUAL_FRAME_POINTER(pc,regp,offsetp)
+Returns a @code{(register, offset)} pair representing the virtual 
+frame pointer in use at the code address @code{"pc"}.  If virtual 
+frame pointers are not used, a default definition simply returns 
+@code{FP_REGNUM}, with an offset of zero.
+
+@item USE_STRUCT_CONVENTION (gcc_p, type)
+If defined, this must be an expression that is nonzero if a value of the
+given @var{type} being returned from a function must have space
+allocated for it on the stack.  @var{gcc_p} is true if the function
+being considered is known to have been compiled by GCC; this is helpful
+for systems where GCC is known to use different calling convention than
+other compilers.
+
+@item VARIABLES_INSIDE_BLOCK (desc, gcc_p)
+For dbx-style debugging information, if the compiler puts variable
+declarations inside LBRAC/RBRAC blocks, this should be defined to be
+nonzero.  @var{desc} is the value of @code{n_desc} from the
+@code{N_RBRAC} symbol, and @var{gcc_p} is true if GDB has noticed the
+presence of either the @code{GCC_COMPILED_SYMBOL} or the
+@code{GCC2_COMPILED_SYMBOL}.  By default, this is 0.
+
+@item OS9K_VARIABLES_INSIDE_BLOCK (desc, gcc_p)
+Similarly, for OS/9000.  Defaults to 1.
+
+@end table
+
+Motorola M68K target conditionals.
+
+@table @code
+
+@item BPT_VECTOR
+Define this to be the 4-bit location of the breakpoint trap vector.  If
+not defined, it will default to @code{0xf}.
+
+@item REMOTE_BPT_VECTOR
+Defaults to @code{1}.
+
+@end table
+
+@section Adding a New Target
+
+The following files define a target to GDB:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{ttt}.mt
+Contains a Makefile fragment specific to this target.  Specifies what
+object files are needed for target @var{ttt}, by defining
+@samp{TDEPFILES=@dots{}}.  Also specifies the header file which
+describes @var{ttt}, by defining @samp{TM_FILE= tm-@var{ttt}.h}.  You
+can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS}, but
+these are now deprecated and may go away in future versions of GDB.
+
+@item gdb/config/@var{arch}/tm-@var{ttt}.h
+(@file{tm.h} is a link to this file, created by configure).  Contains
+macro definitions about the target machine's registers, stack frame
+format and instructions.
+
+@item gdb/@var{ttt}-tdep.c
+Contains any miscellaneous code required for this target machine.  On
+some machines it doesn't exist at all.  Sometimes the macros in
+@file{tm-@var{ttt}.h} become very complicated, so they are implemented
+as functions here instead, and the macro is simply defined to call the
+function.  This is vastly preferable, since it is easier to understand
+and debug.
+
+@item gdb/config/@var{arch}/tm-@var{arch}.h
+This often exists to describe the basic layout of the target machine's
+processor chip (registers, stack, etc).  If used, it is included by
+@file{tm-@var{ttt}.h}.  It can be shared among many targets that use the
+same processor.
+
+@item gdb/@var{arch}-tdep.c
+Similarly, there are often common subroutines that are shared by all
+target machines that use this particular architecture.
+
+@end table
+
+If you are adding a new operating system for an existing CPU chip, add a
+@file{config/tm-@var{os}.h} file that describes the operating system
+facilities that are unusual (extra symbol table info; the breakpoint
+instruction needed; etc).  Then write a @file{@var{arch}/tm-@var{os}.h}
+that just @code{#include}s @file{tm-@var{arch}.h} and
+@file{config/tm-@var{os}.h}.
+
+
+@node Target Vector Definition
+
+@chapter Target Vector Definition
+
+The target vector defines the interface between GDB's abstract handling
+of target systems, and the nitty-gritty code that actually exercises
+control over a process or a serial port.  GDB includes some 30-40
+different target vectors; however, each configuration of GDB includes
+only a few of them.
+
+@section File Targets
+
+Both executables and core files have target vectors.
+
+@section Standard Protocol and Remote Stubs
+
+GDB's file @file{remote.c} talks a serial protocol to code that runs in
+the target system.  GDB provides several sample ``stubs'' that can be
+integrated into target programs or operating systems for this purpose;
+they are named @file{*-stub.c}.
+
+The GDB user's manual describes how to put such a stub into your target
+code.  What follows is a discussion of integrating the SPARC stub into a
+complicated operating system (rather than a simple program), by Stu
+Grossman, the author of this stub.
+
+The trap handling code in the stub assumes the following upon entry to
+trap_low:
+
+@enumerate
+
+@item %l1 and %l2 contain pc and npc respectively at the time of the trap
+
+@item traps are disabled
+
+@item you are in the correct trap window
+
+@end enumerate
+
+As long as your trap handler can guarantee those conditions, then there
+is no reason why you shouldn't be able to `share' traps with the stub.
+The stub has no requirement that it be jumped to directly from the
+hardware trap vector.  That is why it calls @code{exceptionHandler()},
+which is provided by the external environment.  For instance, this could
+setup the hardware traps to actually execute code which calls the stub
+first, and then transfers to its own trap handler.
+
+For the most point, there probably won't be much of an issue with
+`sharing' traps, as the traps we use are usually not used by the kernel,
+and often indicate unrecoverable error conditions.  Anyway, this is all
+controlled by a table, and is trivial to modify.  The most important
+trap for us is for @code{ta 1}.  Without that, we can't single step or
+do breakpoints.  Everything else is unnecessary for the proper operation
+of the debugger/stub.
+
+From reading the stub, it's probably not obvious how breakpoints work.
+They are simply done by deposit/examine operations from GDB.
+
+@section ROM Monitor Interface
+
+@section Custom Protocols
+
+@section Transport Layer
+
+@section Builtin Simulator
+
+
+@node Native Debugging
+
+@chapter Native Debugging
+
+Several files control GDB's configuration for native support:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting @emph{or native} on
+machine @var{xyz}.  In particular, this lists the required
+native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}.
+Also specifies the header file which describes native support on
+@var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}.  You can also
+define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS},
+@samp{NAT_CDEPS}, etc.; see @file{Makefile.in}.
+
+@item gdb/config/@var{arch}/nm-@var{xyz}.h
+(@file{nm.h} is a link to this file, created by configure).  Contains C
+macro definitions describing the native system environment, such as
+child process control and core file support.
+
+@item gdb/@var{xyz}-nat.c
+Contains any miscellaneous C code required for this native support of
+this machine.  On some machines it doesn't exist at all.
+
+@end table
+
+There are some ``generic'' versions of routines that can be used by
+various systems.  These can be customized in various ways by macros
+defined in your @file{nm-@var{xyz}.h} file.  If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.
+
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-nat.c}, and put @code{@var{xyz}-nat.o}
+into @code{NATDEPFILES}.
+
+@table @file
+
+@item inftarg.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use ptrace and wait to control the child.
+
+@item procfs.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use /proc to control the child.
+
+@item fork-child.c
+This does the low-level grunge that uses Unix system calls to do a "fork
+and exec" to start up a child process.
+
+@item infptrace.c
+This is the low level interface to inferior processes for systems using
+the Unix @code{ptrace} call in a vanilla way.
+
+@end table
+
+@section Native core file Support
+
+@table @file
+
+@item core-aout.c::fetch_core_registers()
+Support for reading registers out of a core file.  This routine calls
+@code{register_addr()}, see below.  Now that BFD is used to read core
+files, virtually all machines should use @code{core-aout.c}, and should
+just provide @code{fetch_core_registers} in @code{@var{xyz}-nat.c} (or
+@code{REGISTER_U_ADDR} in @code{nm-@var{xyz}.h}).
+
+@item core-aout.c::register_addr()
+If your @code{nm-@var{xyz}.h} file defines the macro
+@code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to
+set @code{addr} to the offset within the @samp{user} struct of GDB
+register number @code{regno}.  @code{blockend} is the offset within the
+``upage'' of @code{u.u_ar0}.  If @code{REGISTER_U_ADDR} is defined,
+@file{core-aout.c} will define the @code{register_addr()} function and
+use the macro in it.  If you do not define @code{REGISTER_U_ADDR}, but
+you are using the standard @code{fetch_core_registers()}, you will need
+to define your own version of @code{register_addr()}, put it into your
+@code{@var{xyz}-nat.c} file, and be sure @code{@var{xyz}-nat.o} is in
+the @code{NATDEPFILES} list.  If you have your own
+@code{fetch_core_registers()}, you may not need a separate
+@code{register_addr()}.  Many custom @code{fetch_core_registers()}
+implementations simply locate the registers themselves.@refill
+
+@end table
+
+When making GDB run native on a new operating system, to make it
+possible to debug core files, you will need to either write specific
+code for parsing your OS's core files, or customize
+@file{bfd/trad-core.c}.  First, use whatever @code{#include} files your
+machine uses to define the struct of registers that is accessible
+(possibly in the u-area) in a core file (rather than
+@file{machine/reg.h}), and an include file that defines whatever header
+exists on a core file (e.g. the u-area or a @samp{struct core}).  Then
+modify @code{trad_unix_core_file_p()} to use these values to set up the
+section information for the data segment, stack segment, any other
+segments in the core file (perhaps shared library contents or control
+information), ``registers'' segment, and if there are two discontiguous
+sets of registers (e.g.  integer and float), the ``reg2'' segment.  This
+section information basically delimits areas in the core file in a
+standard way, which the section-reading routines in BFD know how to seek
+around in.
+
+Then back in GDB, you need a matching routine called
+@code{fetch_core_registers()}.  If you can use the generic one, it's in
+@file{core-aout.c}; if not, it's in your @file{@var{xyz}-nat.c} file.
+It will be passed a char pointer to the entire ``registers'' segment,
+its length, and a zero; or a char pointer to the entire ``regs2''
+segment, its length, and a 2.  The routine should suck out the supplied
+register values and install them into GDB's ``registers'' array.
+
+If your system uses @file{/proc} to control processes, and uses ELF
+format core files, then you may be able to use the same routines for
+reading the registers out of processes and out of core files.
+
+@section ptrace
+
+@section /proc
+
+@section win32
+
+@section shared libraries
+
+@section Native Conditionals
+
+When GDB is configured and compiled, various macros are defined or left
+undefined, to control compilation when the host and target systems are
+the same.  These macros should be defined (or left undefined) in
+@file{nm-@var{system}.h}.
+
+@table @code
+
+@item ATTACH_DETACH
+If defined, then GDB will include support for the @code{attach} and
+@code{detach} commands.
+
+@item CHILD_PREPARE_TO_STORE
+If the machine stores all registers at once in the child process, then
+define this to ensure that all values are correct.  This usually entails
+a read from the child.
+
+[Note that this is incorrectly defined in @file{xm-@var{system}.h} files
+currently.]
+
+@item FETCH_INFERIOR_REGISTERS
+Define this if the native-dependent code will provide its own routines
+@code{fetch_inferior_registers} and @code{store_inferior_registers} in
+@file{@var{HOST}-nat.c}.  If this symbol is @emph{not} defined, and
+@file{infptrace.c} is included in this configuration, the default
+routines in @file{infptrace.c} are used for these functions.
+
+@item FILES_INFO_HOOK
+(Only defined for Convex.)
+
+@item FP0_REGNUM
+This macro is normally defined to be the number of the first floating
+point register, if the machine has such registers.  As such, it would
+appear only in target-specific code.  However, /proc support uses this
+to decide whether floats are in use on this target.
+
+@item GET_LONGJMP_TARGET
+For most machines, this is a target-dependent parameter.  On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
+
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint.  It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer.  It examines the current state of the machine as needed.
+
+@item KERNEL_U_ADDR
+Define this to the address of the @code{u} structure (the ``user
+struct'', also known as the ``u-page'') in kernel virtual memory.  GDB
+needs to know this so that it can subtract this address from absolute
+addresses in the upage, that are obtained via ptrace or from core files.
+On systems that don't need this value, set it to zero.
+
+@item KERNEL_U_ADDR_BSD
+Define this to cause GDB to determine the address of @code{u} at
+runtime, by using Berkeley-style @code{nlist} on the kernel's image in
+the root directory.
+
+@item KERNEL_U_ADDR_HPUX
+Define this to cause GDB to determine the address of @code{u} at
+runtime, by using HP-style @code{nlist} on the kernel's image in the
+root directory.
+
+@item ONE_PROCESS_WRITETEXT
+Define this to be able to, when a breakpoint insertion fails, warn the
+user that another process may be running with the same executable.
+
+@item PROC_NAME_FMT
+Defines the format for the name of a @file{/proc} device.  Should be
+defined in @file{nm.h} @emph{only} in order to override the default
+definition in @file{procfs.c}.
+
+@item PTRACE_FP_BUG
+mach386-xdep.c
+
+@item PTRACE_ARG3_TYPE
+The type of the third argument to the @code{ptrace} system call, if it
+exists and is different from @code{int}.
+
+@item REGISTER_U_ADDR
+Defines the offset of the registers in the ``u area''.
+
+@item SHELL_COMMAND_CONCAT
+If defined, is a string to prefix on the shell command used to start the
+inferior.
+
+@item SHELL_FILE
+If defined, this is the name of the shell to use to run the inferior.
+Defaults to @code{"/bin/sh"}.
+
+@item SOLIB_ADD (filename, from_tty, targ)
+Define this to expand into an expression that will cause the symbols in
+@var{filename} to be added to GDB's symbol table.
+
+@item SOLIB_CREATE_INFERIOR_HOOK
+Define this to expand into any shared-library-relocation code that you
+want to be run just after the child process has been forked.
+
+@item START_INFERIOR_TRAPS_EXPECTED
+When starting an inferior, GDB normally expects to trap twice; once when
+the shell execs, and once when the program itself execs.  If the actual
+number of traps is something other than 2, then define this macro to
+expand into the number expected.
+
+@item SVR4_SHARED_LIBS
+Define this to indicate that SVR4-style shared libraries are in use.
+
+@item USE_PROC_FS
+This determines whether small routines in @file{*-tdep.c}, which
+translate register values between GDB's internal representation and the
+/proc representation, are compiled.
+
+@item U_REGS_OFFSET
+This is the offset of the registers in the upage.  It need only be
+defined if the generic ptrace register access routines in
+@file{infptrace.c} are being used (that is, @file{infptrace.c} is
+configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined).  If
+the default value from @file{infptrace.c} is good enough, leave it
+undefined.
+
+The default value means that u.u_ar0 @emph{points to} the location of
+the registers.  I'm guessing that @code{#define U_REGS_OFFSET 0} means
+that u.u_ar0 @emph{is} the location of the registers.
+
+@item CLEAR_SOLIB
+objfiles.c
+
+@item DEBUG_PTRACE
+Define this to debug ptrace calls.
+
+@end table
+
+
+@node Support Libraries
+
+@chapter Support Libraries
+
+@section BFD
+
+BFD provides support for GDB in several ways:
+
+@table @emph
+
+@item identifying executable and core files
+BFD will identify a variety of file types, including a.out, coff, and
+several variants thereof, as well as several kinds of core files.
+
+@item access to sections of files
+BFD parses the file headers to determine the names, virtual addresses,
+sizes, and file locations of all the various named sections in files
+(such as the text section or the data section).  GDB simply calls BFD to
+read or write section X at byte offset Y for length Z.
+
+@item specialized core file support
+BFD provides routines to determine the failing command name stored in a
+core file, the signal with which the program failed, and whether a core
+file matches (i.e. could be a core dump of) a particular executable
+file.
+
+@item locating the symbol information
+GDB uses an internal interface of BFD to determine where to find the
+symbol information in an executable file or symbol-file.  GDB itself
+handles the reading of symbols, since BFD does not ``understand'' debug
+symbols, but GDB uses BFD's cached information to find the symbols,
+string table, etc.
+
+@end table
+
+@section opcodes
+
+The opcodes library provides GDB's disassembler.  (It's a separate
+library because it's also used in binutils, for @file{objdump}).
+
+@section readline
+
+@section mmalloc
+
+@section libiberty
+
+@section gnu-regex
+
+Regex conditionals.
+
+@table @code
+
+@item C_ALLOCA
+
+@item NFAILURES
+
+@item RE_NREGS
+
+@item SIGN_EXTEND_CHAR
+
+@item SWITCH_ENUM_BUG
+
+@item SYNTAX_TABLE
+
+@item Sword
+
+@item sparc
+
+@end table
+
+@section include
+
+@node Coding
+
+@chapter Coding
+
+This chapter covers topics that are lower-level than the major
+algorithms of GDB.
+
+@section Cleanups
+
+Cleanups are a structured way to deal with things that need to be done
+later.  When your code does something (like @code{malloc} some memory,
+or open a file) that needs to be undone later (e.g. free the memory or
+close the file), it can make a cleanup.  The cleanup will be done at
+some future point: when the command is finished, when an error occurs,
+or when your code decides it's time to do cleanups.
+
+You can also discard cleanups, that is, throw them away without doing
+what they say.  This is only done if you ask that it be done.
+
+Syntax:
+
+@table @code
+
+@item struct cleanup *@var{old_chain};
+Declare a variable which will hold a cleanup chain handle.
+
+@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
+Make a cleanup which will cause @var{function} to be called with
+@var{arg} (a @code{char *}) later.  The result, @var{old_chain}, is a
+handle that can be passed to @code{do_cleanups} or
+@code{discard_cleanups} later.  Unless you are going to call
+@code{do_cleanups} or @code{discard_cleanups} yourself, you can ignore
+the result from @code{make_cleanup}.
+
+@item do_cleanups (@var{old_chain});
+Perform all cleanups done since @code{make_cleanup} returned
+@var{old_chain}.  E.g.:
+@example
+make_cleanup (a, 0); 
+old = make_cleanup (b, 0); 
+do_cleanups (old);
+@end example
+@noindent
+will call @code{b()} but will not call @code{a()}.  The cleanup that
+calls @code{a()} will remain in the cleanup chain, and will be done
+later unless otherwise discarded.@refill
+
+@item discard_cleanups (@var{old_chain});
+Same as @code{do_cleanups} except that it just removes the cleanups from
+the chain and does not call the specified functions.
+
+@end table
+
+Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify
+that they ``should not be called when cleanups are not in place''.  This
+means that any actions you need to reverse in the case of an error or
+interruption must be on the cleanup chain before you call these
+functions, since they might never return to your code (they
+@samp{longjmp} instead).
+
+@section Wrapping Output Lines
+
+Output that goes through @code{printf_filtered} or @code{fputs_filtered}
+or @code{fputs_demangled} needs only to have calls to @code{wrap_here}
+added in places that would be good breaking points.  The utility
+routines will take care of actually wrapping if the line width is
+exceeded.
+
+The argument to @code{wrap_here} is an indentation string which is
+printed @emph{only} if the line breaks there.  This argument is saved
+away and used later.  It must remain valid until the next call to
+@code{wrap_here} or until a newline has been printed through the
+@code{*_filtered} functions.  Don't pass in a local variable and then
+return!
+
+It is usually best to call @code{wrap_here()} after printing a comma or
+space.  If you call it before printing a space, make sure that your
+indentation properly accounts for the leading space that will print if
+the line wraps there.
+
+Any function or set of functions that produce filtered output must
+finish by printing a newline, to flush the wrap buffer, before switching
+to unfiltered (``@code{printf}'') output.  Symbol reading routines that
+print warnings are a good example.
+
+@section GDB Coding Standards
+
+GDB follows the GNU coding standards, as described in
+@file{etc/standards.texi}.  This file is also available for anonymous
+FTP from GNU archive sites.  GDB takes a strict interpretation of the
+standard; in general, when the GNU standard recommends a practice but
+does not require it, GDB requires it.
+
+GDB follows an additional set of coding standards specific to GDB,
+as described in the following sections.
+
+You can configure with @samp{--enable-build-warnings} to get GCC to
+check on a number of these rules.  GDB sources ought not to engender any
+complaints, unless they are caused by bogus host systems.  (The exact
+set of enabled warnings is currently @samp{-Wall -Wpointer-arith
+-Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations}.
+
+@subsection Formatting
+
+The standard GNU recommendations for formatting must be followed
+strictly.
+
+Note that while in a definition, the function's name must be in column
+zero; in a function declaration, the name must be on the same line as
+the return type.
+
+In addition, there must be a space between a function or macro name and
+the opening parenthesis of its argument list (except for macro
+definitions, as required by C).  There must not be a space after an open
+paren/bracket or before a close paren/bracket.
+
+While additional whitespace is generally helpful for reading, do not use
+more than one blank line to separate blocks, and avoid adding whitespace
+after the end of a program line (as of 1/99, some 600 lines had whitespace
+after the semicolon).  Excess whitespace causes difficulties for diff and
+patch.
+
+@subsection Comments
+
+The standard GNU requirements on comments must be followed strictly.
+
+Block comments must appear in the following form, with no `/*'- or
+'*/'-only lines, and no leading `*':
+
+@example @code
+/* Wait for control to return from inferior to debugger.  If inferior
+   gets a signal, we may decide to start it up again instead of
+   returning.  That is why there is a loop in this function.  When
+   this function actually returns it means the inferior should be left
+   stopped and GDB should read more commands.  */
+@end example
+
+(Note that this format is encouraged by Emacs; tabbing for a multi-line
+comment works correctly, and M-Q fills the block consistently.)
+
+Put a blank line between the block comments preceding function or
+variable definitions, and the definition itself.
+
+In general, put function-body comments on lines by themselves, rather
+than trying to fit them into the 20 characters left at the end of a
+line, since either the comment or the code will inevitably get longer
+than will fit, and then somebody will have to move it anyhow.
+
+@subsection C Usage
+
+Code must not depend on the sizes of C data types, the format of the
+host's floating point numbers, the alignment of anything, or the order
+of evaluation of expressions.
+
+Use functions freely.  There are only a handful of compute-bound areas
+in GDB that might be affected by the overhead of a function call, mainly
+in symbol reading.  Most of GDB's performance is limited by the target
+interface (whether serial line or system call).
+
+However, use functions with moderation.  A thousand one-line functions
+are just as hard to understand as a single thousand-line function.
+
+@subsection Function Prototypes
+
+Prototypes must be used to @emph{declare} functions but never to
+@emph{define} them.  Prototypes for GDB functions must include both the
+argument type and name, with the name matching that used in the actual
+function definition.
+
+For the sake of compatibility with pre-ANSI compilers, define prototypes
+with the @code{PARAMS} macro:
+
+@example @code
+extern int memory_remove_breakpoint PARAMS ((CORE_ADDR addr,
+                                             char *contents_cache));
+@end example
+
+Note the double parentheses around the parameter types.  This allows an
+arbitrary number of parameters to be described, without freaking out the
+C preprocessor.  When the function has no parameters, it should be
+described like:
+
+@example @code
+extern void noprocess PARAMS ((void));
+@end example
+
+The @code{PARAMS} macro expands to its argument in ANSI C, or to a
+simple @code{()} in traditional C.
+
+All external functions should have a @code{PARAMS} declaration in a
+header file that callers include, except for @code{_initialize_*}
+functions, which must be external so that @file{init.c} construction
+works, but shouldn't be visible to random source files.
+
+All static functions must be declared in a block near the top of the
+source file.
+
+@subsection Clean Design
+
+In addition to getting the syntax right, there's the little question of
+semantics.  Some things are done in certain ways in GDB because long
+experience has shown that the more obvious ways caused various kinds of
+trouble.
+
+You can't assume the byte order of anything that comes from a target
+(including @var{value}s, object files, and instructions).  Such things
+must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in GDB, or one of
+the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}.
+
+You can't assume that you know what interface is being used to talk to
+the target system.  All references to the target must go through the
+current @code{target_ops} vector.
+
+You can't assume that the host and target machines are the same machine
+(except in the ``native'' support modules).  In particular, you can't
+assume that the target machine's header files will be available on the
+host machine.  Target code must bring along its own header files --
+written from scratch or explicitly donated by their owner, to avoid
+copyright problems.
+
+Insertion of new @code{#ifdef}'s will be frowned upon.  It's much better
+to write the code portably than to conditionalize it for various
+systems.
+
+New @code{#ifdef}'s which test for specific compilers or manufacturers
+or operating systems are unacceptable.  All @code{#ifdef}'s should test
+for features.  The information about which configurations contain which
+features should be segregated into the configuration files.  Experience
+has proven far too often that a feature unique to one particular system
+often creeps into other systems; and that a conditional based on some
+predefined macro for your current system will become worthless over
+time, as new versions of your system come out that behave differently
+with regard to this feature.
+
+Adding code that handles specific architectures, operating systems,
+target interfaces, or hosts, is not acceptable in generic code.  If a
+hook is needed at that point, invent a generic hook and define it for
+your configuration, with something like:
+
+@example
+#ifdef	WRANGLE_SIGNALS
+   WRANGLE_SIGNALS (signo);
+#endif
+@end example
+
+In your host, target, or native configuration file, as appropriate,
+define @code{WRANGLE_SIGNALS} to do the machine-dependent thing.  Take a
+bit of care in defining the hook, so that it can be used by other ports
+in the future, if they need a hook in the same place.
+
+If the hook is not defined, the code should do whatever "most" machines
+want.  Using @code{#ifdef}, as above, is the preferred way to do this,
+but sometimes that gets convoluted, in which case use
+
+@example
+#ifndef SPECIAL_FOO_HANDLING
+#define SPECIAL_FOO_HANDLING(pc, sp) (0)
+#endif
+@end example
+
+where the macro is used or in an appropriate header file.
+
+Whether to include a @dfn{small} hook, a hook around the exact pieces of
+code which are system-dependent, or whether to replace a whole function
+with a hook depends on the case.  A good example of this dilemma can be
+found in @code{get_saved_register}.  All machines that GDB 2.8 ran on
+just needed the @code{FRAME_FIND_SAVED_REGS} hook to find the saved
+registers.  Then the SPARC and Pyramid came along, and
+@code{HAVE_REGISTER_WINDOWS} and @code{REGISTER_IN_WINDOW_P} were
+introduced.  Then the 29k and 88k required the @code{GET_SAVED_REGISTER}
+hook.  The first three are examples of small hooks; the latter replaces
+a whole function.  In this specific case, it is useful to have both
+kinds; it would be a bad idea to replace all the uses of the small hooks
+with @code{GET_SAVED_REGISTER}, since that would result in much
+duplicated code.  Other times, duplicating a few lines of code here or
+there is much cleaner than introducing a large number of small hooks.
+
+Another way to generalize GDB along a particular interface is with an
+attribute struct.  For example, GDB has been generalized to handle
+multiple kinds of remote interfaces -- not by #ifdef's everywhere, but
+by defining the "target_ops" structure and having a current target (as
+well as a stack of targets below it, for memory references).  Whenever
+something needs to be done that depends on which remote interface we are
+using, a flag in the current target_ops structure is tested (e.g.
+`target_has_stack'), or a function is called through a pointer in the
+current target_ops structure.  In this way, when a new remote interface
+is added, only one module needs to be touched -- the one that actually
+implements the new remote interface.  Other examples of
+attribute-structs are BFD access to multiple kinds of object file
+formats, or GDB's access to multiple source languages.
+
+Please avoid duplicating code.  For example, in GDB 3.x all the code
+interfacing between @code{ptrace} and the rest of GDB was duplicated in
+@file{*-dep.c}, and so changing something was very painful.  In GDB 4.x,
+these have all been consolidated into @file{infptrace.c}.
+@file{infptrace.c} can deal with variations between systems the same way
+any system-independent file would (hooks, #if defined, etc.), and
+machines which are radically different don't need to use infptrace.c at
+all.
+
+
+@node Porting GDB
+
+@chapter Porting GDB
+
+Most of the work in making GDB compile on a new machine is in specifying
+the configuration of the machine.  This is done in a dizzying variety of
+header files and configuration scripts, which we hope to make more
+sensible soon.  Let's say your new host is called an @var{xyz} (e.g.
+@samp{sun4}), and its full three-part configuration name is
+@code{@var{arch}-@var{xvend}-@var{xos}} (e.g.  @samp{sparc-sun-sunos4}).
+In particular:
+
+In the top level directory, edit @file{config.sub} and add @var{arch},
+@var{xvend}, and @var{xos} to the lists of supported architectures,
+vendors, and operating systems near the bottom of the file.  Also, add
+@var{xyz} as an alias that maps to
+@code{@var{arch}-@var{xvend}-@var{xos}}.  You can test your changes by
+running
+
+@example
+./config.sub @var{xyz}
+@end example
+@noindent
+and
+@example
+./config.sub @code{@var{arch}-@var{xvend}-@var{xos}}
+@end example
+@noindent
+which should both respond with @code{@var{arch}-@var{xvend}-@var{xos}}
+and no error messages.
+
+You need to port BFD, if that hasn't been done already.  Porting BFD is
+beyond the scope of this manual.
+
+To configure GDB itself, edit @file{gdb/configure.host} to recognize
+your system and set @code{gdb_host} to @var{xyz}, and (unless your
+desired target is already available) also edit @file{gdb/configure.tgt},
+setting @code{gdb_target} to something appropriate (for instance,
+@var{xyz}).
+
+Finally, you'll need to specify and define GDB's host-, native-, and
+target-dependent @file{.h} and @file{.c} files used for your
+configuration.
+
+@section Configuring GDB for Release
+
+From the top level directory (containing @file{gdb}, @file{bfd},
+@file{libiberty}, and so on):
+@example
+make -f Makefile.in gdb.tar.gz
+@end example
+
+This will properly configure, clean, rebuild any files that are
+distributed pre-built (e.g. @file{c-exp.tab.c} or @file{refcard.ps}),
+and will then make a tarfile.  (If the top level directory has already
+been configured, you can just do @code{make gdb.tar.gz} instead.)
+
+This procedure requires:
+@itemize @bullet
+@item symbolic links
+@item @code{makeinfo} (texinfo2 level)
+@item @TeX{}
+@item @code{dvips}
+@item @code{yacc} or @code{bison}
+@end itemize
+@noindent
+@dots{} and the usual slew of utilities (@code{sed}, @code{tar}, etc.).
+
+@subheading TEMPORARY RELEASE PROCEDURE FOR DOCUMENTATION
+
+@file{gdb.texinfo} is currently marked up using the texinfo-2 macros,
+which are not yet a default for anything (but we have to start using
+them sometime).
+
+For making paper, the only thing this implies is the right generation of
+@file{texinfo.tex} needs to be included in the distribution.
+
+For making info files, however, rather than duplicating the texinfo2
+distribution, generate @file{gdb-all.texinfo} locally, and include the
+files @file{gdb.info*} in the distribution.  Note the plural;
+@code{makeinfo} will split the document into one overall file and five
+or so included files.
+
+@node Hints
+
+@chapter Hints
+
+Check the @file{README} file, it often has useful information that does not
+appear anywhere else in the directory.
+
+@menu
+* Getting Started::		Getting started working on GDB
+* Debugging GDB::		Debugging GDB with itself
+@end menu
+
+@node Getting Started,,, Hints
+
+@section Getting Started
+
+GDB is a large and complicated program, and if you first starting to
+work on it, it can be hard to know where to start.  Fortunately, if you
+know how to go about it, there are ways to figure out what is going on.
+
+This manual, the GDB Internals manual, has information which applies
+generally to many parts of GDB.
+
+Information about particular functions or data structures are located in
+comments with those functions or data structures.  If you run across a
+function or a global variable which does not have a comment correctly
+explaining what is does, this can be thought of as a bug in GDB; feel
+free to submit a bug report, with a suggested comment if you can figure
+out what the comment should say.  If you find a comment which is
+actually wrong, be especially sure to report that.
+
+Comments explaining the function of macros defined in host, target, or
+native dependent files can be in several places.  Sometimes they are
+repeated every place the macro is defined.  Sometimes they are where the
+macro is used.  Sometimes there is a header file which supplies a
+default definition of the macro, and the comment is there.  This manual
+also documents all the available macros.
+@c (@pxref{Host Conditionals}, @pxref{Target
+@c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
+@c Conditionals})
+
+Start with the header files.  Once you some idea of how GDB's internal
+symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you
+will find it much easier to understand the code which uses and creates
+those symbol tables.
+
+You may wish to process the information you are getting somehow, to
+enhance your understanding of it.  Summarize it, translate it to another
+language, add some (perhaps trivial or non-useful) feature to GDB, use
+the code to predict what a test case would do and write the test case
+and verify your prediction, etc.  If you are reading code and your eyes
+are starting to glaze over, this is a sign you need to use a more active
+approach.
+
+Once you have a part of GDB to start with, you can find more
+specifically the part you are looking for by stepping through each
+function with the @code{next} command.  Do not use @code{step} or you
+will quickly get distracted; when the function you are stepping through
+calls another function try only to get a big-picture understanding
+(perhaps using the comment at the beginning of the function being
+called) of what it does.  This way you can identify which of the
+functions being called by the function you are stepping through is the
+one which you are interested in.  You may need to examine the data
+structures generated at each stage, with reference to the comments in
+the header files explaining what the data structures are supposed to
+look like.
+
+Of course, this same technique can be used if you are just reading the
+code, rather than actually stepping through it.  The same general
+principle applies---when the code you are looking at calls something
+else, just try to understand generally what the code being called does,
+rather than worrying about all its details.
+
+A good place to start when tracking down some particular area is with a
+command which invokes that feature.  Suppose you want to know how
+single-stepping works.  As a GDB user, you know that the @code{step}
+command invokes single-stepping.  The command is invoked via command
+tables (see @file{command.h}); by convention the function which actually
+performs the command is formed by taking the name of the command and
+adding @samp{_command}, or in the case of an @code{info} subcommand,
+@samp{_info}.  For example, the @code{step} command invokes the
+@code{step_command} function and the @code{info display} command invokes
+@code{display_info}.  When this convention is not followed, you might
+have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run GDB on
+itself and set a breakpoint in @code{execute_command}.
+
+If all of the above fail, it may be appropriate to ask for information
+on @code{bug-gdb}.  But @emph{never} post a generic question like ``I was
+wondering if anyone could give me some tips about understanding
+GDB''---if we had some magic secret we would put it in this manual.
+Suggestions for improving the manual are always welcome, of course.
+
+@node Debugging GDB,,,Hints
+
+@section Debugging GDB with itself
+
+If GDB is limping on your machine, this is the preferred way to get it
+fully functional.  Be warned that in some ancient Unix systems, like
+Ultrix 4.2, a program can't be running in one process while it is being
+debugged in another.  Rather than typing the command @code{@w{./gdb
+./gdb}}, which works on Suns and such, you can copy @file{gdb} to
+@file{gdb2} and then type @code{@w{./gdb ./gdb2}}.
+
+When you run GDB in the GDB source directory, it will read a
+@file{.gdbinit} file that sets up some simple things to make debugging
+gdb easier.  The @code{info} command, when executed without a subcommand
+in a GDB being debugged by gdb, will pop you back up to the top level
+gdb.  See @file{.gdbinit} for details.
+
+If you use emacs, you will probably want to do a @code{make TAGS} after
+you configure your distribution; this will put the machine dependent
+routines for your local machine where they will be accessed first by
+@kbd{M-.}
+
+Also, make sure that you've either compiled GDB with your local cc, or
+have run @code{fixincludes} if you are compiling with gcc.
+
+@section Submitting Patches
+
+Thanks for thinking of offering your changes back to the community of
+GDB users.  In general we like to get well designed enhancements.
+Thanks also for checking in advance about the best way to transfer the
+changes.
+
+The GDB maintainers will only install ``cleanly designed'' patches.  You
+may not always agree on what is clean design.
+@c @pxref{Coding Style}, @pxref{Clean Design}.
+
+If the maintainers don't have time to put the patch in when it arrives,
+or if there is any question about a patch, it goes into a large queue
+with everyone else's patches and bug reports.
+
+The legal issue is that to incorporate substantial changes requires a
+copyright assignment from you and/or your employer, granting ownership
+of the changes to the Free Software Foundation.  You can get the
+standard document for doing this by sending mail to
+@code{gnu@@prep.ai.mit.edu} and asking for it.  I recommend that people
+write in "All programs owned by the Free Software Foundation" as "NAME
+OF PROGRAM", so that changes in many programs (not just GDB, but GAS,
+Emacs, GCC, etc) can be contributed with only one piece of legalese
+pushed through the bureacracy and filed with the FSF.  I can't start
+merging changes until this paperwork is received by the FSF (their
+rules, which I follow since I maintain it for them).
+
+Technically, the easiest way to receive changes is to receive each
+feature as a small context diff or unidiff, suitable for "patch".
+Each message sent to me should include the changes to C code and
+header files for a single feature, plus ChangeLog entries for each
+directory where files were modified, and diffs for any changes needed
+to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi).  If there
+are a lot of changes for a single feature, they can be split down
+into multiple messages.
+
+In this way, if I read and like the feature, I can add it to the
+sources with a single patch command, do some testing, and check it in.
+If you leave out the ChangeLog, I have to write one.  If you leave
+out the doc, I have to puzzle out what needs documenting.  Etc.
+
+The reason to send each change in a separate message is that I will
+not install some of the changes.  They'll be returned to you with
+questions or comments.  If I'm doing my job, my message back to you
+will say what you have to fix in order to make the change acceptable.
+The reason to have separate messages for separate features is so
+that other changes (which I @emph{am} willing to accept) can be installed
+while one or more changes are being reworked.  If multiple features
+are sent in a single message, I tend to not put in the effort to sort
+out the acceptable changes from the unacceptable, so none of the
+features get installed until all are acceptable.
+
+If this sounds painful or authoritarian, well, it is.  But I get a lot
+of bug reports and a lot of patches, and most of them don't get
+installed because I don't have the time to finish the job that the bug
+reporter or the contributor could have done.  Patches that arrive
+complete, working, and well designed, tend to get installed on the day
+they arrive.  The others go into a queue and get installed if and when
+I scan back over the queue -- which can literally take months
+sometimes.  It's in both our interests to make patch installation easy
+-- you get your changes installed, and I make some forward progress on
+GDB in a normal 12-hour day (instead of them having to wait until I
+have a 14-hour or 16-hour day to spend cleaning up patches before I
+can install them).
+
+Please send patches directly to the GDB maintainers at
+@code{gdb-patches@@cygnus.com}.
+
+@section Obsolete Conditionals
+
+Fragments of old code in GDB sometimes reference or set the following
+configuration macros.  They should not be used by new code, and old uses
+should be removed as those parts of the debugger are otherwise touched.
+
+@table @code
+
+@item STACK_END_ADDR
+This macro used to define where the end of the stack appeared, for use
+in interpreting core file formats that don't record this address in the
+core file itself.  This information is now configured in BFD, and GDB
+gets the info portably from there.  The values in GDB's configuration
+files should be moved into BFD configuration files (if needed there),
+and deleted from all of GDB's config files.
+
+Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR
+is so old that it has never been converted to use BFD.  Now that's old!
+
+@item PYRAMID_CONTROL_FRAME_DEBUGGING
+pyr-xdep.c
+@item PYRAMID_CORE
+pyr-xdep.c
+@item PYRAMID_PTRACE
+pyr-xdep.c
+
+@item REG_STACK_SEGMENT
+exec.c
+
+@end table
+
+
+@contents
+@bye
diff --git a/gdb/doc/libgdb.texinfo b/gdb/doc/libgdb.texinfo
new file mode 100644
index 0000000..4fadcb2
--- /dev/null
+++ b/gdb/doc/libgdb.texinfo
@@ -0,0 +1,878 @@
+\input texinfo   @c -*-texinfo-*-
+@c %**start of header
+@setfilename libgdb.info
+@settitle Libgdb
+@setchapternewpage off
+@c %**end of header
+
+@ifinfo
+This file documents libgdb, the GNU symbolic debugger in a library.
+
+This is Edition 0.3, Oct 1993, of @cite{Libgdb}.
+Copyright 1993 Cygnus Support
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided also that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+
+Permission is granted to copy and distribute translations of this manual
+into another language, under the above conditions for modified versions.
+@end ifinfo
+
+@c  This title page illustrates only one of the
+@c  two methods of forming a title page.
+
+@titlepage
+@title Libgdb
+@subtitle Version 0.3
+@subtitle Oct 1993
+@author Thomas Lord
+
+@c  The following two commands
+@c  start the copyright page.
+@page
+@vskip 0pt plus 1filll
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+Copyright @copyright{} 1993 Cygnus Support
+@end titlepage
+
+@ifinfo
+@node Top, Overview, (dir), (dir)
+
+This info file documents libgdb: an API for GDB, the GNU symbolic debugger.
+
+@menu
+* Overview::	             The basics of libgdb and this document.
+* Interpreter::              Libgdb is an Interpreter-Based Server.
+* Top Level::                You Provide the Top Level for the Libgdb
+                                Command Interpreter .
+* I/O::                      How the Server's I/O Can be Used.
+* Invoking::                 Invoking the Interpreter, Executing
+                                Commands. 
+* Defining Commands::        How New Commands are Created.
+* Variables::                How Builtin Variables are Defined.
+* Asynchronous::             Scheduling Asynchronous Computations.
+* Commands::                 Debugger Commands for Libgdb Applications
+@end menu
+
+@end ifinfo
+@node    Overview, Interpreter, top,      top
+@comment node-name,     next,           previous, up
+@chapter Overview
+@cindex overview
+@cindex definitions
+
+@heading Function and Purpose
+
+Libgdb is a package which provides an API to the functionality of GDB,
+the GNU symbolic debugger.  It is specifically intended to support the
+development of a symbolic debugger with a graphic interface.
+
+
+@heading This Document
+
+This document is a specification of the libgdb API.  It is written in
+the form of a programmer's manual.  So the goal of this document is to
+explain what functions make up the API, and how they can be used in a
+running application.
+
+
+@heading Terminology
+
+In this document, @dfn{libgdb} refers to a library containing the
+functions defined herein, @dfn{application} refers to any program built
+with that library.
+
+
+@heading Dependencies
+
+Programs which are linked with libgdb must be linked with libbfd,
+libopcodes, libiberty, and libmmalloc.
+
+@heading Acknowledgments
+
+Essential contributions to this design were made by Stu Grossman, Jim
+Kingdon, and Rich Pixley.
+
+@node Interpreter, Top Level, Overview, Top
+@comment  node-name,  next,  previous,  up
+@chapter Libgdb is an Interpreter Based Server
+@cindex interpreter
+@cindex server
+
+To understand libgdb, it is necessary to understand how the library is
+structured.  Historically, GDB is written as a small interpreter for a
+simple command language.  The commands of the language perform useful
+debugging functions.
+
+Libgdb is built from GDB by turning the interpreter into a debugging
+server.  The server reads debugging commands from any source and
+interprets them, directing the output arbitrarily.
+
+In addition to changing GDB from a tty-based program to a server, a
+number of new GDB commands have been added to make the server more
+useful for a program with a graphic interface.
+
+Finally, libgdb includes provisions for asynchronous processing within
+the application.
+
+Most operations that can be carried out with libgdb involve the GDB
+command interpreter.  The usual mode of operation is that the operation
+is expressed as a string of GDB commands, which the interpreter is then
+invoked to carry out.  The output from commands executed in this manner
+can be redirected in a variety of useful ways for further processing by
+the application.
+
+The command interpreter provides an extensive system of hooks so an
+application can monitor any aspect of the debugging library's state.  An
+application can set its own breakpoints and attach commands and
+conditions to those.  It is possible to attach hooks to any debugger
+command; the hooks are invoked whenever that command is about to be
+invoked.  By means of these, the displays of a graphical interface can
+be kept fully up to date at all times.
+
+We show you how to define new primitives in the command language.  By
+defining new primitives and using them in breakpoint scripts and command
+hooks, an application can schedule the execution of arbitrary C-code at
+almost any point of interest in the operation of libgdb.
+
+We show you how to define new GDB convenience variables for which your
+code computes a value on demand.  Referring to such variables in a
+breakpoint condition is a convenient way to conditionalize breakpoints
+in novel ways.
+
+To summarize: in libgdb, the gdb command language is turned into a
+debugging server.  The server takes commands as input, and the server's
+output is redirectable.  An application uses libgdb by formatting
+debugging commands and invoking the interpreter.  The application might
+maintain breakpoints, watchpoints and many kinds of hooks.  An application
+can define new primitives for the interpreter.
+
+@node Top Level, I/O, Interpreter, Top
+@chapter You Provide the Top Level for the Libgdb Command Interpreter
+@cindex {top level}
+
+When you use libgdb, your code is providing a @dfn{top level} for the
+command language interpreter.  The top level is significant because it
+provides commands for the the interpreter to execute.  In addition, the
+top level is responsible for handling some kinds of errors, and
+performing certain cleanup operations on behalf of the interpreter.
+
+@heading Initialization
+
+Before calling any other libgdb functions, call this:
+
+@deftypefun void gdb_init (void)
+Perform one-time initialization for libgdb.
+@end deftypefun
+
+An application may wish to evaluate specific gdb commands as part of its
+own initialization.  The details of how this can be accomplished are
+explained below.
+
+@heading The Top-Level Loop
+
+There is a strong presumption in libgdb that the application has
+the form of a loop.  Here is what such a loop might look like:
+
+@example
+while (gdb_still_going ())
+  @{
+    if (!GDB_TOP_LEVEL ())
+      @{
+        char * command;
+        gdb_start_top_loop ();
+        command = process_events ();
+        gdb_execute_command (command);
+        gdb_finish_top_loop ();
+      @}
+    @}
+@end example
+
+The function @code{gdb_still_going} returns 1 until the gdb command
+`quit' is run.
+
+The macro @code{GDB_TOP_LEVEL} invokes setjmp to set the top level error
+handler.  When a command results in an error, the interpreter exits with
+a longjmp. There is nothing special libgdb requires of the top level
+error handler other than it be present and that it restart the top level
+loop.  Errors are explained in detail in a later chapter.
+
+Each time through the top level loop two important things happen: a
+debugger command is constructed on the basis of user input, and the
+interpreter is invoked to execute that command.  In the sample code, the
+call to the imaginary function @code{process_events} represents the
+point at which a graphical interface should read input events until
+ready to execute a debugger command.  The call to
+@code{gdb_execute_command} invokes the command interpreter (what happens
+to the output from the command will be explained later).
+
+Libgdb manages some resources using the top-level loop.  The primary
+reason for this is error-handling: even if a command terminates with an
+error, it may already have allocated resources which need to be freed.
+The freeing of such resources takes place at the top-level, regardless
+of how the the command exits.  The calls to @code{gdb_start_top_loop}
+and @code{gdb_finish_top_loop} let libgdb know when it is safe to
+perform operations associated with these resources.
+
+@heading Breakpoint Commands
+
+Breakpoint commands are scripts of GDB operations associated with 
+particular breakpoints.  When a breakpoint is reached, its associated
+commands are executed.
+
+Breakpoint commands are invoked by the libgdb function
+@code{gdb_finish_top_loop}.  
+
+Notice that if control returns to the top-level error handler, the
+execution of breakpoint commands is bypassed.  This can happen as a
+result of errors during either @code{gdb_execute_command} or
+@code{gdb_finish_top_loop}.
+
+@heading Application Initialization
+
+Sometimes it is inconvenient to execute commands via a command loop for
+example, the commands an application uses to initialize itself.  An
+alternative to @code{execute_command} is @code{execute_catching_errors}.
+When @code{execute_catching_errors} is used, no top level error handler
+need be in effect, and it is not necessary to call
+@code{gdb_start_top_loop} or @code{gdb_finish_top_loop}.
+
+
+@heading Cleanup
+
+The debugger command ``quit'' performs all necessary cleanup for libgdb.
+After it has done so, it changes the return value of
+@code{gdb_still_going} to 0 and returns to the top level error handler.
+
+
+@node I/O, Invoking, Top Level, Top
+@comment  node-name,  next,  previous,  up
+@chapter How the Server's I/O Can be Used
+@cindex I/O
+
+In the last chapter it was pointed out that a libgdb application is
+responsible for providing commands for the interpreter to execute.
+However some commands require further input (for example, the ``quit''
+command might ask for confirmation).  Almost all commands produce output
+of some kind.  The purpose of this section is to explain how libgdb
+performs its I/O, and how an application can take advantage of
+this.
+
+
+@heading I/O Vectors
+
+Libgdb has no fixed strategy for I/O.  Instead, all operations are
+performed by functions called via structures of function pointers.
+Applications supply theses structures and can change them at any
+time.
+
+@deftp Type {struct gdb_input_vector}
+@deftpx Type {struct gdb_output_vector}
+These structures contain a set of function pointers.  Each function
+determines how a particular type of i/o is performed.  The details of
+these strucutres are explained below.
+
+The application allocates these structures, initializes them to all bits
+zero, fills in the function pointers, and then registers names for them
+them with libgdb.
+@end deftp
+
+@deftypefun void gdb_name_input_vector (@var{name}, @var{vec})
+@deftypefunx void gdb_remove_input_vector (@var{name}, @var{vec})
+@deftypefunx void gdb_name_output_vector (@var{name}, @var{vec})
+@deftypefunx void gdb_remove_input_vector (@var{name}, @var{vec})
+@example
+  char * @var{name};
+  struct gdb_output_vector * @var{vec};
+@end example
+These functions are used to give and remove names to i/o vectors.  Note
+that if a name is used twice, the most recent definition applies.
+@end deftypefun
+
+
+
+@subheading Output
+
+An output vector is a structure with at least these fields: 
+
+@example
+struct gdb_output_vector
+@{
+  /* output */
+  void (*put_string) (struct gdb_output_vector *, char * str);
+@}
+@end example
+
+Use the function @code{memset} or something equivalent to initialize an
+output vector to all bits zero.  Then fill in the function pointer with
+your function.
+
+A debugger command can produce three kinds of output: error messages
+(such as when trying to delete a non-existent breakpoint), informational
+messages (such as the notification printed when a breakpoint is hit),
+and the output specifically requested by a command (for example, the
+value printed by the ``print'' command).  At any given time, then,
+libgdb has three output vectors.  These are called the @dfn{error},
+@dfn{info}, @dfn{value} vector respectively.  
+
+@subheading Input
+
+@example
+struct gdb_input_vector
+@{
+  int (*query) (struct gdb_input_vector *,
+                char * prompt,
+                int quit_allowed);
+  int * (*selection) (struct gdb_input_vector *,
+                      char * prompt,
+                      char ** choices);
+  char * (*read_string) (struct gdb_input_vector *,
+                         char * prompt);
+  char ** (*read_strings) (struct gdb_input_vector *,
+                           char * prompt);
+@}
+@end example
+
+Use the function @code{memset} or something equivalent to initialize an
+input vector to all bits zero.  Then fill in the function pointers with
+your functions.
+
+There are four kinds of input requests explicitly made by libgdb.
+
+A @dfn{query} is a yes or no question.  The user can respond to a query
+with an affirmative or negative answer, or by telling gdb to abort the
+command (in some cases an abort is not permitted).  Query should return
+'y' or 'n' or 0 to abort.
+
+A @dfn{selection} is a list of options from which the user selects a subset.
+Selections should return a NULL terminated array of integers, which are
+indexes into the array of choices.  It can return NULL instead to abort
+the command.  The array returned by this function will be passed to
+@code{free} by libgdb.
+
+A @dfn{read_string} asks the user to supply an arbitrary string.  It may
+return NULL to abort the command.  The string returned by @code{read_string}
+should be allocated by @code{malloc}; it will be freed by libgdb.
+
+A @dfn{read_strings} asks the user to supply multiple lines of input
+(for example, the body of a command created using `define').  It, too,
+may return NULL to abort.  The array and the strings returned by this
+function will be freed by libgdb.
+
+@heading I/O Redirection from the Application Top-Level
+
+@deftypefun struct gdb_io_vecs gdb_set_io (struct gdb_io_vecs *)
+@example
+
+struct gdb_io_vecs
+@{
+  struct gdb_input_vector * input;
+  struct gdb_output_vector * error;
+  struct gdb_output_vector * info;
+  struct gdb_output_vector * value;
+@}
+@end example
+
+This establishes a new set of i/o vectors, and returns the old setting.
+Any of the pointers in this structure may be NULL, indicating that the
+current value should be used.
+
+This function is useful for setting up i/o vectors before any libgdb
+commands have been invoked (hence before any input or output has taken
+place).
+@end deftypefun
+
+It is explained in a later chapter how to redirect output temporarily.
+(@xref{Invoking}.)
+
+@heading I/O Redirection in Debugger Commands
+
+A libgdb application creates input and output vectors and assigns them names.
+Which input and output vectors are used by libgdb is established by
+executing these debugger commands: 
+
+@defun {set input-vector} name
+@defunx {set error-output-vector} name
+@defunx {set info-output-vector} name
+@defunx {set value-output-vector} name
+Choose an I/O vector by name.
+@end defun
+
+
+A few debugger commands are for use only within commands defined using
+the debugger command `define' (they have no effect at other times).
+These commands exist so that an application can maintain hooks which
+redirect output without affecting the global I/O vectors.
+
+@defun with-input-vector name
+@defunx with-error-output-vector name
+@defunx with-info-output-vector name
+@defunx with-value-output-vector name
+Set an I/O vector, but only temporarily.  The setting has effect only
+within the command definition in which it occurs.
+@end defun
+
+
+@heading Initial Conditions
+
+When libgdb is initialized, a set of default I/O vectors is put in
+place.  The default vectors are called @code{default-input-vector},
+@code{default-output-vector}, &c.  
+
+The default query function always returns `y'.  Other input functions
+always abort.  The default output functions discard output silently.
+
+
+@node Invoking, Defining Commands, I/O, Top
+@chapter Invoking the Interpreter, Executing Commands
+@cindex {executing commands}
+@cindex {invoking the interpreter}
+
+This section introduces the libgdb functions which invoke the command
+interpreter. 
+
+@deftypefun void gdb_execute_command (@var{command})
+@example
+char * @var{command};
+@end example
+Interpret the argument debugger command.  An error handler must be set
+when this function is called. (@xref{Top Level}.)
+@end deftypefun
+
+It is possible to override the current I/O vectors for the duration of a
+single command:
+
+@deftypefun void gdb_execute_with_io (@var{command}, @var{vecs})
+@example 
+char * @var{command};
+struct gdb_io_vecs * @var{vecs};
+
+struct gdb_io_vecs
+@{
+  struct gdb_input_vector * input;
+  struct gdb_output_vector * error;
+  struct gdb_output_vector * info;
+  struct gdb_output_vector * value;
+@}
+@end example
+
+Execute @var{command}, temporarily using the i/o vectors in @var{vecs}.
+
+Any of the vectors may be NULL, indicating that the current value should
+be used.  An error handler must be in place when this function is used.
+@end deftypefun
+
+@deftypefun {struct gdb_str_output} gdb_execute_for_strings (@var{cmd})
+@example
+char * cmd;
+@end example
+@deftypefunx {struct gdb_str_output} gdb_execute_for_strings2 (@var{cmd}, @var{input})
+@example
+char * cmd;
+struct gdb_input_vector * input;
+@end example
+@page
+@example
+struct gdb_str_output
+@{
+  char * error;
+  char * info;
+  char * value;
+@};
+@end example
+
+Execute @var{cmd}, collecting its output as strings.  If no error
+occurs, all three strings will be present in the structure, the
+empty-string rather than NULL standing for no output of a particular
+kind. 
+
+If the command aborts with an error, then the @code{value} field will be
+NULL, though the other two strings will be present.
+
+In all cases, the strings returned are allocated by malloc and should be
+freed by the caller.
+
+The first form listed uses the current input vector, but overrides the
+current output vector.  The second form additionally allows the input
+vector to be overridden.
+
+This function does not require that an error handler be installed.
+@end deftypefun
+
+@deftypefun void execute_catching_errors (@var{command})
+@example
+char * @var{command};
+@end example
+Like @code{execute_command} except that no error handler is required.
+@end deftypefun
+
+@deftypefun void execute_with_text (@var{command}, @var{text})
+@example
+char * @var{command};
+char ** @var{text};
+@end example
+Like @code{execute_catching_errors}, except that the input vector is
+overridden.  The new input vector handles only calls to @code{query} (by
+returning 'y') and calls to @code{read_strings} by returning a copy of
+@var{text} and the strings it points to.
+
+This form of execute_command is useful for commands like @code{define},
+@code{document}, and @code{commands}.
+@end deftypefun
+
+
+
+@node Defining Commands, Variables, Invoking, Top
+@comment  node-name,  next,  previous,  up
+@chapter How New Commands are Created
+@cindex {commands, defining}
+
+Applications are, of course, free to take advantage of the existing GDB
+macro definition capability (the @code{define} and @code{document}
+functions).  
+
+In addition, an application can add new primitives to the GDB command
+language.
+
+@deftypefun void gdb_define_app_command (@var{name}, @var{fn}, @var{doc})
+@example
+char * @var{name};
+gdb_cmd_fn @var{fn};
+char * @var{doc};
+
+typedef void (*gdb_cmd_fn) (char * args);
+@end example
+
+Create a new command call @var{name}.  The new command is in the
+@code{application} help class.  When invoked, the command-line arguments
+to the command are passed as a single string.
+
+Calling this function twice with the same name replaces an earlier
+definition, but application commands can not replace builtin commands of
+the same name.
+
+The documentation string of the command is set to a copy the string
+@var{doc}.
+@end deftypefun
+
+@node Variables, Asynchronous, Defining Commands, Top
+@comment  node-name,  next,  previous,  up
+@chapter How Builtin Variables are Defined
+@cindex {variables, defining}
+
+Convenience variables provide a way for values maintained by libgdb to
+be referenced in expressions (e.g. @code{$bpnum}).  Libgdb includes a
+means by which the application can define new, integer valued
+convenience variables:
+@page
+@deftypefun void gdb_define_int_var (@var{name}, @var{fn}, @var{fn_arg})
+@example
+char * @var{name};
+int (*@var{fn}) (void *);
+void * @var{fn_arg};
+@end example
+This function defines (or undefines) a convenience variable called @var{name}.
+If @var{fn} is NULL, the variable becomes undefined.  Otherwise,
+@var{fn} is a function which, when passed @var{fn_arg} returns the value
+of the newly defined variable.
+
+No libgdb functions should be called by @var{fn}.
+@end deftypefun
+
+One use for this function is to create breakpoint conditions computed in
+novel ways.  This is done by defining a convenience variable and
+referring to that variable in a breakpoint condition expression.
+
+
+@node Asynchronous, Commands, Variables, Top
+@chapter Scheduling Asynchronous Computations
+@cindex asynchronous
+
+
+A running libgdb function can take a long time.  Libgdb includes a hook
+so that an application can run intermittently during long debugger
+operations.
+
+@deftypefun void gdb_set_poll_fn (@var{fn}, @var{fn_arg})
+@example
+void (*@var{fn})(void * fn_arg, int (*gdb_poll)());
+void * @var{fn_arg};
+@end example
+Arrange to call @var{fn} periodically during lengthy debugger operations.
+If @var{fn} is NULL, polling is turned off.  @var{fn} should take two
+arguments: an opaque pointer passed as @var{fn_arg} to
+@code{gdb_set_poll_fn}, and a function pointer.  The function pointer
+passed to @var{fn} is provided by libgdb and points to a function that
+returns 0 when the poll function should return.  That is, when
+@code{(*gdb_poll)()} returns 0, libgdb is ready to continue @var{fn}
+should return quickly.
+
+It is possible that @code{(*gdb_poll)()} will return 0 the first time it
+is called, so it is reasonable for an application to do minimal processing
+before checking whether to return.
+
+No libgdb functions should be called from an application's poll function,
+with one exception: @code{gdb_request_quit}.
+@end deftypefun
+
+
+@deftypefun void gdb_request_quit (void)
+This function, if called from a poll function, requests that the
+currently executing libgdb command be interrupted as soon as possible,
+and that control be returned to the top-level via an error.
+
+The quit is not immediate.  It will not occur until at least after the
+application's poll function returns.
+@end deftypefun 
+
+@node Commands, Top, Asynchronous, Top
+@comment  node-name,  next,  previous,  up
+@chapter Debugger Commands for Libgdb Applications
+
+The debugger commands available to libgdb applications are the same commands
+available interactively via GDB.  This section is an overview of the
+commands newly created as part of libgdb.
+
+This section is not by any means a complete reference to the GDB command
+language.  See the GDB manual for such a reference.
+
+@menu
+* Command Hooks::    Setting Hooks to Execute With Debugger Commands.
+* View Commands::    View Commands Mirror Show Commands
+* Breakpoints::      The Application Can Have Its Own Breakpoints
+@end menu
+
+@node Command Hooks, View Commands, Commands, Commands
+@comment  node-name,  next,  previous,  up
+@section Setting Hooks to Execute With Debugger Commands.
+
+Debugger commands support hooks.  A command hook is executed just before
+the interpreter invokes the hooked command.
+
+There are two hooks allowed for every command.  By convention, one hook
+is for use by users, the other is for use by the application.
+
+A user hook is created for a command XYZZY by using
+@code{define-command} to create a command called @code{hook-XYZZY}.
+
+An application hook is created for a command XYZZY by using
+@code{define-command} to create a command called @code{apphook-XYZZY}.
+
+Application hooks are useful for interfaces which wish to continuously
+monitor certain aspects of debugger state.  The application can set a
+hook on all commands that might modify the watched state.  When the hook
+is executed, it can use i/o redirection to notify parts of the
+application that previous data may be out of date.  After the top-level loop
+resumes, the application can recompute any values that may have changed.
+(@xref{I/O}.)
+
+@node View Commands, Breakpoints, Command Hooks, Commands
+@comment  node-name,  next,  previous,  up
+@section View Commands Mirror Show Commands
+
+The GDB command language contains many @code{set} and @code{show}
+commands.  These commands are used to modify or examine parameters to
+the debugger.
+
+It is difficult to get the current state of a parameter from the
+@code{show} command because @code{show} is very verbose.
+
+@example
+(gdb) show check type
+Type checking is "auto; currently off".
+(gdb) show width
+Number of characters gdb thinks are in a line is 80.
+@end example
+
+For every @code{show} command, libgdb includes a @code{view} command.
+@code{view} is like @code{show} without the verbose commentary:
+
+@example
+(gdb) view check type
+auto; currently off
+(gdb) view width
+80
+@end example
+
+(The precise format of the ouput from @code{view} is subject to change.
+In particular, @code{view} may one-day print values which can be used as
+arguments to the corresponding @code{set} command.)
+
+@node Breakpoints, Structured Output, View Commands, Commands
+@comment  node-name,  next,  previous,  up
+@section The Application Can Have Its Own Breakpoints
+
+The GDB breakpoint commands were written with a strong presumption that
+all breakpoints are managed by a human user.  Therefore, the command
+language contains commands like `delete' which affect all breakpoints
+without discrimination.
+
+In libgdb, there is added support for breakpoints and watchpoints which
+are set by the application and which should not be affected by ordinary,
+indiscriminate commands.  These are called @dfn{protected} breakpoints.
+
+@deffn {Debugger Command} break-protected ...
+@deffnx {Debugger Command} watch-protected ...
+These work like @code{break} and @code{watch} except that the resulting
+breakpoint is given a negative number.  Negative numbered breakpoints do
+not appear in the output of @code{info breakpoints} but do in that of
+@code{info all-breakpoints}.  Negative numbered breakpoints are not
+affected by commands which ordinarily affect `all' breakpoints (e.g.
+@code{delete} with no arguments).
+
+Note that libgdb itself creates protected breakpoints, so programs
+should not rely on being able to allocate particular protected
+breakpoint numbers for themselves.
+@end deffn
+
+More than one breakpoint may be set at a given location.  Libgdb adds
+the concept of @dfn{priority} to breakpoints.  A priority is an integer,
+assigned to each breakpoint.  When a breakpoint is reached, the
+conditions of all breakpoints at the same location are evaluated in
+order of ascending priority.  When breakpoint commands are executed,
+they are also executed in ascending priority (until all have been
+executed, an error occurs, or one set of commands continues the
+target).
+
+@deffn {Debugger Command} priority n bplist
+Set the priority for breakpoints @var{bplist} to @var{n}.
+By default, breakpoints are assigned a priority of zero.
+@end deffn
+
+@node Structured Output, Commands, Breakpoints, Commands
+@comment  node-name,  next,  previous,  up
+@section  Structured Output, The @code{Explain} Command
+
+(This section may be subject to considerable revision.)
+
+When GDB prints a the value of an expression, the printed representation
+contains information that can be usefully fed back into future commands
+and expressions.  For example, 
+
+@example
+(gdb) print foo
+$16 = @{v = 0x38ae0, v_length = 40@}
+@end example
+
+On the basis of this output, a user knows, for example, that
+@code{$16.v} refers to a pointer valued @code{0x38ae0}
+
+A new output command helps to make information like this available to
+the application.
+
+@deffn {Debugger Command} explain expression
+@deffnx {Debugger Command} explain /format expression
+Print the value of @var{expression} in the manner of the @code{print}
+command, but embed that output in a list syntax containing information
+about the structure of the output.
+@end deffn
+
+As an example, @code{explain argv} might produce this output:
+
+@example
+(exp-attribute
+   ((expression "$19")
+    (type "char **")
+    (address "48560")
+    (deref-expression "*$19"))
+   "$19 = 0x3800\n")
+@end example
+
+The syntax of output from @code{explain} is:
+
+@example
+<explanation> :=    <quoted-string>
+                  | (exp-concat <explanation> <explanation>*)
+                  | (exp-attribute <property-list> <explanation>)
+
+<property-list> := ( <property-pair>* )
+
+<property-pair> := ( <property-name> <quoted-string> )
+@end example
+
+The string-concatenation of all of the @code{<quoted-string>} (except
+those in property lists) yields the output generated by the equivalent
+@code{print} command.  Quoted strings may contain quotes and backslashes
+if they are escaped by backslash.  "\n" in a quoted string stands for
+newline; unescaped newlines do not occur within the strings output by
+@code{explain}.
+
+Property names are made up of alphabetic characters, dashes, and
+underscores.
+
+The set of properties is open-ended.  As GDB acquires support for new
+source languages and other new capabilities, new property types may be
+added to the output of this command.  Future commands may offer
+applications some selectivity concerning which properties are reported.
+
+The initial set of properties defined includes: 
+
+@itemize @bullet
+@item @code{expression}
+
+This is an expression, such as @code{$42} or @code{$42.x}.  The
+expression can be used to refer to the value printed in the attributed
+part of the string.
+
+@item @code{type}
+
+This is a user-readable name for the type of the attributed value.
+
+@item @code{address}
+
+If the value is stored in a target register, this is a register number.
+If the value is stored in a GDB convenience variable, this is an integer
+that is unique among all the convenience variables.  Otherwise, this is
+the address in the target where the value is stored.
+
+@item @code{deref-expression}
+
+If the attributed value is a pointer type, this is an expression that
+refers to the dereferenced value.
+@end itemize
+
+Here is a larger example, using the same object passed to @code{print}
+in an earlier example of this section.
+
+@example
+(gdb) explain foo
+(exp-attribute
+  ( (expression "$16")
+    (type "struct bytecode_vector")
+    (address 14336) )
+  (exp-concat
+    "$16 = @{"
+    (exp-attribute
+      ( (expression "$16.v")
+        (type "char *")
+        (address 14336)
+        (deref-expression "*$16.v") )
+      "v = 0x38ae0")
+    (exp-attribute
+      ( (expression "$16.v_length")
+        (type "int")
+        (address 14340) )
+      ", v_length = 40")
+     "@}\n"))
+@end example
+
+It is undefined how libgdb will indent these lines of output or 
+where newlines will be included.
+
+@bye
diff --git a/gdb/doc/lpsrc.sed b/gdb/doc/lpsrc.sed
new file mode 100644
index 0000000..1c7af4a
--- /dev/null
+++ b/gdb/doc/lpsrc.sed
@@ -0,0 +1,13 @@
+/font defs: ---/,/end font defs ---/c\
+%-------------------- PostScript (long names) font defs: -----------------\
+\\font\\bbf=Times-Bold at 10pt\
+\\font\\vbbf=Times-Bold at 12pt\
+\\font\\smrm=Times-Roman at 6pt\
+\\font\\brm=Times-Roman at 10pt\
+\\font\\rm=Times-Roman at 8pt\
+\\font\\it=Times-Italic at 8pt\
+\\font\\tt=Courier at 8pt\
+% Used only for \copyright, replacing plain TeX macro.\
+\\font\\sym=Symbol at 7pt\
+\\def\\copyright{{\\sym\\char'323}}\
+%-------------------- end font defs ---------------------------------
diff --git a/gdb/doc/psrc.sed b/gdb/doc/psrc.sed
new file mode 100644
index 0000000..9bb557e
--- /dev/null
+++ b/gdb/doc/psrc.sed
@@ -0,0 +1,13 @@
+/font defs: ---/,/end font defs ---/c\
+%-------------------- PostScript (K Berry names) font defs: --------------\
+\\font\\bbf=ptmb at 10pt\
+\\font\\vbbf=ptmb at 12pt\
+\\font\\smrm=ptmr at 6pt\
+\\font\\brm=ptmr at 10pt\
+\\font\\rm=ptmr at 8pt\
+\\font\\it=ptmri at 8pt\
+\\font\\tt=pcrr at 8pt\
+% Used only for \copyright, replacing plain TeX macro.\
+\\font\\sym=psyr at 7pt\
+\\def\\copyright{{\\sym\\char'323}}\
+%-------------------- end font defs ---------------------------------
diff --git a/gdb/doc/refcard.tex b/gdb/doc/refcard.tex
new file mode 100644
index 0000000..d2b72de
--- /dev/null
+++ b/gdb/doc/refcard.tex
@@ -0,0 +1,645 @@
+%%%%%%%%%%%%%%%% gdb-refcard.tex %%%%%%%%%%%%%%%%
+
+%This file is TeX source for a reference card describing GDB, the GNU debugger.
+%Copyright (C) 1991, 1992, 1993, 1998 Free Software Foundation, Inc.
+%Permission is granted to make and distribute verbatim copies of
+%this reference provided the copyright notices and permission notices
+%are preserved on all copies.
+%
+%TeX markup is a programming language; accordingly this file is source
+%for a program to generate a reference.
+%
+%This program is free software; you can redistribute it and/or modify
+%it under the terms of the GNU General Public License as published by
+%the Free Software Foundation; either version 2, or (at your option)
+%any later version.
+%
+%This program is distributed in the hope that it will be useful, but
+%WITHOUT ANY WARRANTY; without even the implied warranty of
+%MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+%General Public License for more details.
+%
+%You can find a copy of the GNU General Public License at the URL
+%http://www.gnu.org/copyleft/gpl.html; or write to the Free Software
+%Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+%
+%You can contact the maintainer at:  doc@cygnus.com
+%
+%                                Documentation Department
+%                                Cygnus Solutions
+%                                1325 Chesapeake Terrace
+%                                Sunnyvale, CA 94089  USA
+%
+%                                +1 800 CYGNUS-1
+%
+%
+%
+% 22-AUG-1993 Andreas Vogel
+%
+%   Modifications made in order to handle different papersizes correctly.
+%   You only have to set the total width and height of the paper, the
+%   horizontal and vertical margin space measured from *paper edge*
+%   and the interline and interspec spacing.
+%   In order to support a new papersize, you have to fiddle with the
+%   latter four dimensions. Just try out a few values.
+%   All other values will be computed at process time so it should be
+%   quite easy to support different paper sizes - only four values to
+%   guess :-)
+%
+%   To find the configuration places, just search for the string
+%   "CONFIGURATION".
+%
+%   Andreas Vogel (av@ssw.de)
+%
+%
+%
+% Uncomment the following `magnification' command if you want to print
+% out in a larger font.  Caution!  You may need larger paper.  You had
+% best avoid using 3-column output if you try this.  See the ``Three
+% column format'' section below if you want to print in three column
+% format.
+%
+%\magnification=\magstep 1
+%
+% NOTE ON INTENTIONAL OMISSIONS: This reference card includes most GDB
+% commands, but due to space constraints there are some things I chose
+% to omit.  In general, not all synonyms for commands are covered, nor
+% all variations of a command.
+% The GDB-under-Emacs section omits gdb-mode functions without default
+% keybindings.  GDB startup options are not described.
+% set print sevenbit-strings, set symbol-reloading omitted.
+% printsyms, printpsyms, omitted since they're for GDB maintenance primarily
+% share omitted due to obsolescence
+% set check range/type omitted at least til code is in GDB.
+%
+%-------------------- Three column format -----------------------
+
+%%%% --- To disable three column format, comment out this entire section
+
+% Three-column format for landscape printing
+
+%-------- Papersize defs:
+
+\newdimen\totalwidth \newdimen\totalheight
+\newdimen\hmargin    \newdimen\vmargin
+\newdimen\secskip    \newdimen\lskip
+\newdimen\barwidth   \newdimen\barheight
+\newdimen\intersecwidth
+
+%%
+%%  START CONFIGURATION - PAPERSIZE DEFINITIONS
+%------- Papersize params:
+%%  US letter paper (8.5x11in)
+%%
+\totalwidth=11in    % total width of paper
+\totalheight=8.5in  % total height of paper
+\hmargin=.25in      % horizontal margin width
+\vmargin=.25in      % vertical margin width
+\secskip=1pc        % space between refcard secs
+\lskip=2pt          % extra skip between \sec entries
+%------- end papersize params
+%%
+%%  change according to personal taste, not papersize dependent
+%%
+\barwidth=.1pt       % width of the cropmark bar
+\barheight=2pt       % height of the cropmark bar
+\intersecwidth=0.5em % width between \itmwid and \dfnwid
+%%
+%%  END CONFIGURATION - PAPERSIZE DEFINITIONS
+%%
+
+%%
+%%  values to be computed - nothing to configure
+%%
+\newdimen\fullhsize     % width of area without margins
+\newdimen\itmwid        % width of item column
+\newdimen\dfnwid        % width of definition column
+\newdimen\temp          % only for temporary use
+
+%%
+%%  adjust the offsets so the margins are measured *from paper edge*
+%%
+\hoffset=-1in \advance \hoffset by \hmargin
+\voffset=-1in \advance \voffset by \vmargin
+
+%%
+%%  fullhsize = totalwidth - (2 * hmargin)
+%%
+\fullhsize=\totalwidth
+\temp=\hmargin \multiply \temp by 2 \advance \fullhsize by -\temp
+
+%%
+%%  hsize = (fullhsize - (4 * hmargin) - (2 * barwidth)) / 3
+%%
+\hsize=\fullhsize
+\temp=\hmargin \multiply \temp by 4 \advance \hsize by -\temp
+\temp=\barwidth \multiply \temp by 2 \advance \hsize by -\temp
+\divide \hsize by 3
+
+%%
+%%  vsize = totalheight - (2 * vmargin)
+%%
+\vsize=\totalheight
+\temp=\vmargin \multiply \temp by 2 \advance \vsize by -\temp
+
+%%
+%%  itmwid = (hsize - intersecwidth) * 1/3
+%%  dfnwid = (hsize - intersecwidth) * 2/3
+%%
+\temp=\hsize \advance \temp by -\intersecwidth \divide \temp by 3
+\itmwid=\temp
+\dfnwid=\hsize \advance \dfnwid by -\itmwid
+
+%-------- end papersize defs
+
+
+\def\fulline{\hbox to \fullhsize}
+\let\lcr=L \newbox\leftcolumn\newbox\centercolumn
+\output={\if L\lcr
+            \global\setbox\leftcolumn=\columnbox \global\let\lcr=C
+	 \else
+            \if C\lcr
+               \global\setbox\centercolumn=\columnbox \global\let\lcr=R
+            \else \tripleformat \global\let\lcr=L
+            \fi
+         \fi
+%         \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+      }
+
+%%
+%%  START CONFIGURATION - ALTERNATIVE FOLDING GUIDES
+%%
+%%  For NO printed folding guide,
+%%  comment out other \def\vdecor's and uncomment:
+
+%\def\vdecor{\hskip\hmargin plus1fil\hskip\barwidth plus1fil\hskip\hmargin plus1fil}
+
+%%  For SOLID LINE folding guide,
+%%  comment out other \def\vdecor's and uncomment:
+
+%\def\vdecor{\hskip\hmargin plus1fil \vrule width \barwidth \hskip\hmargin plus1fil}
+
+%%  For SMALL MARKS NEAR TOP AND BOTTOM as folding guide,
+%%  comment out other \def\vdecor's and uncomment:
+
+\def\vdecor{\hskip\hmargin plus1fil
+\vbox to \vsize{\hbox to \barwidth{\vrule height\barheight width\barwidth}\vfill
+\hbox to \barwidth{\vrule height\barheight width\barwidth}}%THIS PERCENT SIGN IS ESSENTIAL
+\hskip\hmargin plus1fil}
+
+%%
+%%  END CONFIGURATION - ALTERNATIVES FOR FOLDING GUIDES
+%%
+
+\def\tripleformat{\shipout\vbox{\fulline{\box\leftcolumn\vdecor
+					 \box\centercolumn\vdecor
+					 \columnbox}
+			       }
+                 \advancepageno}
+\def\columnbox{\leftline{\pagebody}}
+\def\bye{\par\vfill
+         \supereject
+         \if R\lcr \null\vfill\eject\fi
+         \end}
+
+%-------------------- end three column format -----------------------
+
+%-------------------- Computer Modern font defs: --------------------
+\font\bbf=cmbx10
+\font\vbbf=cmbx12
+\font\smrm=cmr6
+\font\brm=cmr10
+\font\rm=cmr7
+\font\it=cmti7
+\font\tt=cmtt8
+%-------------------- end font defs ---------------------------------
+
+%
+\hyphenpenalty=5000\tolerance=2000\raggedright\raggedbottom
+\normalbaselineskip=9pt\baselineskip=9pt
+%
+\parindent=0pt
+\parskip=0pt
+\footline={\vbox to0pt{\hss}}
+%
+\def\ctl#1{{\tt C-#1}}
+\def\opt#1{{\brm[{\rm #1}]}}
+\def\xtra#1{\noalign{\smallskip{\tt#1}}}
+%
+\long\def\sec#1;#2\endsec{\vskip \secskip
+\halign{%
+%COL 1 (of halign):
+\vtop{\hsize=\itmwid\tt
+##\par\vskip \lskip }\hfil
+%COL 2 (of halign):
+&\vtop{\hsize=\dfnwid\hangafter=1\hangindent=\intersecwidth
+\rm ##\par\vskip \lskip}\cr
+%Tail of \long\def fills in halign body with \sec args:
+\noalign{{\bbf #1}\vskip \lskip}
+#2
+}
+}
+
+{\vbbf GDB QUICK REFERENCE}\hfil{\smrm GDB Version 4}\qquad
+
+\sec Essential Commands;
+gdb {\it program} \opt{{\it core}}&debug {\it program} \opt{using
+coredump {\it core}}\cr
+b \opt{\it file\tt:}{\it function}&set breakpoint at {\it function} \opt{in \it file}\cr
+run \opt{{\it arglist}}&start your program \opt{with {\it arglist}}\cr
+bt& backtrace: display program stack\cr
+p {\it expr}&display the value of an expression\cr
+c &continue running your program\cr
+n &next line, stepping over function calls\cr
+s &next line, stepping into function calls\cr
+\endsec
+
+\sec Starting GDB;
+gdb&start GDB, with no debugging files\cr
+gdb {\it program}&begin debugging {\it program}\cr
+gdb {\it program core}&debug coredump {\it core} produced by {\it
+program}\cr
+gdb --help&describe command line options\cr
+\endsec
+
+\sec Stopping GDB;
+quit&exit GDB; also {\tt q} or {\tt EOF} (eg \ctl{d})\cr
+INTERRUPT&(eg \ctl{c}) terminate current command, or send to running process\cr
+\endsec
+
+\sec Getting Help;
+help&list classes of commands\cr
+help {\it class}&one-line descriptions for commands in {\it class}\cr
+help {\it command}&describe {\it command}\cr
+\endsec
+
+\sec Executing your Program;
+run {\it arglist}&start your program with {\it arglist}\cr
+run&start your program with current argument list\cr
+run $\ldots$ <{\it inf} >{\it outf}&start your program with input, output
+redirected\cr
+\cr
+kill&kill running program\cr
+\cr
+tty {\it dev}&use {\it dev} as stdin and stdout for next {\tt run}\cr
+set args {\it arglist}&specify {\it arglist} for next
+{\tt run}\cr
+set args&specify empty argument list\cr
+show args&display argument list\cr
+\cr
+show env&show all environment variables\cr
+show env {\it var}&show value of environment variable {\it var}\cr
+set env {\it var} {\it string}&set environment variable {\it var}\cr
+unset env {\it var}&remove {\it var} from environment\cr
+\endsec
+
+\sec Shell Commands;
+cd {\it dir}&change working directory to {\it dir}\cr
+pwd&Print working directory\cr
+make $\ldots$&call ``{\tt make}''\cr
+shell {\it cmd}&execute arbitrary shell command string\cr
+\endsec
+
+\vfill
+\line{\smrm \opt{ } surround optional arguments \hfill $\ldots$ show
+one or more arguments}
+\vskip\baselineskip
+\centerline{\smrm \copyright 1998 Free Software Foundation, Inc.\qquad Permissions on back}
+\eject
+\sec Breakpoints and Watchpoints;
+break \opt{\it file\tt:}{\it line}\par
+b \opt{\it file\tt:}{\it line}&set breakpoint at {\it line} number \opt{in \it file}\par 
+eg:\quad{\tt break main.c:37}\quad\cr
+break \opt{\it file\tt:}{\it func}&set breakpoint at {\it
+func} \opt{in \it file}\cr
+break +{\it offset}\par
+break -{\it offset}&set break at {\it offset} lines from current stop\cr
+break *{\it addr}&set breakpoint at address {\it addr}\cr
+break&set breakpoint at next instruction\cr
+break $\ldots$ if {\it expr}&break conditionally on nonzero {\it expr}\cr
+cond {\it n} \opt{\it expr}&new conditional expression on breakpoint
+{\it n}; make unconditional if no {\it expr}\cr
+tbreak $\ldots$&temporary break; disable when reached\cr
+rbreak {\it regex}&break on all functions matching {\it regex}\cr
+watch {\it expr}&set a watchpoint for expression {\it expr}\cr
+catch {\it event}&break at {\it event}, which may be {\tt catch}, {\tt throw},
+{\tt exec}, {\tt fork}, {\tt vfork}, {\tt load}, or {\tt unload}.\cr
+\cr
+info break&show defined breakpoints\cr
+info watch&show defined watchpoints\cr
+\cr
+clear&delete breakpoints at next instruction\cr
+clear \opt{\it file\tt:}{\it fun}&delete breakpoints at entry to {\it fun}()\cr
+clear \opt{\it file\tt:}{\it line}&delete breakpoints on source line \cr
+delete \opt{{\it n}}&delete breakpoints
+\opt{or breakpoint {\it n}}\cr
+\cr
+disable \opt{{\it n}}&disable breakpoints
+\opt{or breakpoint {\it n}}
+\cr
+enable \opt{{\it n}}&enable breakpoints 
+\opt{or breakpoint {\it n}}
+\cr
+enable once \opt{{\it n}}&enable breakpoints \opt{or breakpoint {\it n}}; 
+disable again when reached
+\cr
+enable del \opt{{\it n}}&enable breakpoints \opt{or breakpoint {\it n}}; 
+delete when reached
+\cr
+\cr
+ignore {\it n} {\it count}&ignore breakpoint {\it n}, {\it count}
+times\cr
+\cr
+commands {\it n}\par
+\qquad \opt{\tt silent}\par
+\qquad {\it command-list}&execute GDB {\it command-list} every time breakpoint {\it n} is reached. \opt{{\tt silent} suppresses default
+display}\cr
+end&end of {\it command-list}\cr
+\endsec
+
+\sec Program Stack;
+backtrace \opt{\it n}\par
+bt \opt{\it n}&print trace of all frames in stack; or of {\it n}
+frames---innermost if {\it n}{\tt >0}, outermost if {\it n}{\tt <0}\cr
+frame \opt{\it n}&select frame number {\it n} or frame at address {\it
+n}; if no {\it n}, display current frame\cr
+up {\it n}&select frame {\it n} frames up\cr
+down {\it n}&select frame {\it n} frames down\cr
+info frame \opt{\it addr}&describe selected frame, or frame at
+{\it addr}\cr
+info args&arguments of selected frame\cr
+info locals&local variables of selected frame\cr
+info reg \opt{\it rn}$\ldots$\par
+info all-reg \opt{\it rn}&register values \opt{for regs {\it rn\/}} in
+selected frame; {\tt all-reg} includes floating point\cr
+\endsec
+
+\vfill\eject
+\sec Execution Control;
+continue \opt{\it count}\par
+c \opt{\it count}&continue running; if {\it count} specified, ignore
+this breakpoint next {\it count} times\cr
+\cr
+step \opt{\it count}\par
+s \opt{\it count}&execute until another line reached; repeat {\it count} times if
+specified\cr
+stepi \opt{\it count}\par
+si \opt{\it count}&step by machine instructions rather than source
+lines\cr
+\cr
+next \opt{\it count}\par
+n \opt{\it count}&execute next line, including any function calls\cr
+nexti \opt{\it count}\par
+ni \opt{\it count}&next machine instruction rather than source
+line\cr
+\cr
+until \opt{\it location}&run until next instruction (or {\it
+location})\cr
+finish&run until selected stack frame returns\cr
+return \opt{\it expr}&pop selected stack frame without executing
+\opt{setting return value}\cr
+signal {\it num}&resume execution with signal {\it s} (none if {\tt 0})\cr
+jump {\it line}\par
+jump *{\it address}&resume execution at specified {\it line} number or
+{\it address}\cr
+set var={\it expr}&evaluate {\it expr} without displaying it; use for
+altering program variables\cr
+\endsec
+
+\sec Display;
+print \opt{\tt/{\it f}\/} \opt{\it expr}\par
+p \opt{\tt/{\it f}\/} \opt{\it expr}&show value of {\it expr} \opt{or
+last value \tt \$} according to format {\it f}:\cr
+\qquad x&hexadecimal\cr
+\qquad d&signed decimal\cr
+\qquad u&unsigned decimal\cr
+\qquad o&octal\cr
+\qquad t&binary\cr
+\qquad a&address, absolute and relative\cr
+\qquad c&character\cr
+\qquad f&floating point\cr
+call \opt{\tt /{\it f}\/} {\it expr}&like {\tt print} but does not display
+{\tt void}\cr
+x \opt{\tt/{\it Nuf}\/} {\it expr}&examine memory at address {\it expr};
+optional format spec follows slash\cr
+\quad {\it N}&count of how many units to display\cr
+\quad {\it u}&unit size; one of\cr
+&{\tt\qquad b}\ individual bytes\cr
+&{\tt\qquad h}\ halfwords (two bytes)\cr
+&{\tt\qquad w}\ words (four bytes)\cr
+&{\tt\qquad g}\ giant words (eight bytes)\cr
+\quad {\it f}&printing format.  Any {\tt print} format, or\cr
+&{\tt\qquad s}\ null-terminated string\cr
+&{\tt\qquad i}\ machine instructions\cr
+disassem \opt{\it addr}&display memory as machine instructions\cr
+\endsec
+
+\sec Automatic Display;
+display \opt{\tt/\it f\/} {\it expr}&show value of {\it expr} each time
+program stops \opt{according to format {\it f}\/}\cr
+display&display all enabled expressions on list\cr
+undisplay {\it n}&remove number(s) {\it n} from list of
+automatically displayed expressions\cr
+disable disp {\it n}&disable display for expression(s) number {\it
+n}\cr
+enable disp {\it n}&enable display for expression(s) number {\it
+n}\cr
+info display&numbered list of display expressions\cr
+\endsec
+
+\vfill\eject
+
+\sec Expressions;
+{\it expr}&an expression in C, C++, or Modula-2 (including function calls), or:\cr
+{\it addr\/}@{\it len}&an array of {\it len} elements beginning at {\it
+addr}\cr
+{\it file}::{\it nm}&a variable or function {\it nm} defined in {\it
+file}\cr
+$\tt\{${\it type}$\tt\}${\it addr}&read memory at {\it addr} as specified
+{\it type}\cr
+\$&most recent displayed value\cr
+\${\it n}&{\it n}th displayed value\cr
+\$\$&displayed value previous to \$\cr
+\$\${\it n}&{\it n}th displayed value back from \$\cr
+\$\_&last address examined with {\tt x}\cr
+\$\_\_&value at address \$\_\cr
+\${\it var}&convenience variable; assign any value\cr
+\cr
+show values \opt{{\it n}}&show last 10 values \opt{or surrounding
+\${\it n}}\cr
+show conv&display all convenience variables\cr
+\endsec
+
+\sec Symbol Table;
+info address {\it s}&show where symbol {\it s} is stored\cr
+info func \opt{\it regex}&show names, types of defined functions
+(all, or matching {\it regex})\cr
+info var \opt{\it regex}&show names, types of global variables (all,
+or matching {\it regex})\cr
+whatis \opt{\it expr}\par
+ptype \opt{\it expr}&show data type of {\it expr} \opt{or \tt \$}
+without evaluating; {\tt ptype} gives more detail\cr
+ptype {\it type}&describe type, struct, union, or enum\cr
+\endsec
+
+\sec GDB Scripts;
+source {\it script}&read, execute GDB commands from file {\it
+script}\cr
+\cr
+define {\it cmd}\par
+\qquad {\it command-list}&create new GDB command {\it cmd}; 
+execute script defined by {\it command-list}\cr
+end&end of {\it command-list}\cr
+document {\it cmd}\par
+\qquad {\it help-text}&create online documentation 
+for new GDB command {\it cmd}\cr
+end&end of {\it help-text}\cr
+\endsec
+
+\sec Signals;
+handle {\it signal} {\it act}&specify GDB actions for {\it signal}:\cr
+\quad print&announce signal\cr
+\quad noprint&be silent for signal\cr
+\quad stop&halt execution on signal\cr
+\quad nostop&do not halt execution\cr
+\quad pass&allow your program to handle signal\cr
+\quad nopass&do not allow your program to see signal\cr
+info signals&show table of signals, GDB action for each\cr
+\endsec
+
+\sec Debugging Targets;
+target {\it type} {\it param}&connect to target machine, process, or file\cr
+help target&display available targets\cr
+attach {\it param}&connect to another process\cr
+detach&release target from GDB control\cr
+\endsec
+
+\vfill\eject
+\sec Controlling GDB;
+set {\it param} {\it value}&set one of GDB's internal parameters\cr
+show {\it param}&display current setting of parameter\cr
+\xtra{\rm Parameters understood by {\tt set} and {\tt show}:}
+\quad complaint {\it limit}&number of messages on unusual symbols\cr
+\quad confirm {\it on/off}&enable or disable cautionary queries\cr
+\quad editing {\it on/off}&control {\tt readline} command-line editing\cr
+\quad height {\it lpp}&number of lines before pause in display\cr
+\quad language {\it lang}&Language for GDB expressions ({\tt auto}, {\tt c} or
+{\tt modula-2})\cr
+\quad listsize {\it n}&number of lines shown by {\tt list}\cr
+\quad prompt {\it str}&use {\it str} as GDB prompt\cr
+\quad radix {\it base}&octal, decimal, or hex number representation\cr
+\quad verbose {\it on/off}&control messages when loading
+symbols\cr
+\quad width {\it cpl}&number of characters before line folded\cr
+\quad write {\it on/off}&Allow or forbid patching binary, core files
+(when reopened with {\tt exec} or {\tt core})
+\cr
+\quad history $\ldots$\par
+\quad h $\ldots$&groups with the following options:\cr
+\quad h exp {\it off/on}&disable/enable {\tt readline} history expansion\cr
+\quad h file {\it filename}&file for recording GDB command history\cr
+\quad h size {\it size}&number of commands kept in history list\cr
+\quad h save {\it off/on}&control use of external file for
+command history\cr
+\cr
+\quad print $\ldots$\par
+\quad p $\ldots$&groups with the following options:\cr
+\quad p address {\it on/off}&print memory addresses in stacks,
+values\cr
+\quad p  array {\it off/on}&compact or attractive format for
+arrays\cr
+\quad p demangl {\it on/off}&source (demangled) or internal form for C++
+symbols\cr
+\quad p asm-dem {\it on/off}&demangle C++ symbols in
+machine-instruction output\cr
+\quad p elements {\it limit}&number of array elements to display\cr
+\quad p object {\it on/off}&print C++ derived types for objects\cr
+\quad p pretty {\it off/on}&struct display: compact or indented\cr
+\quad p union {\it on/off}&display of union members\cr
+\quad p vtbl {\it off/on}&display of C++ virtual function
+tables\cr
+\cr
+show commands&show last 10 commands\cr
+show commands {\it n}&show 10 commands around number {\it n}\cr
+show commands +&show next 10 commands\cr
+\endsec
+
+\sec Working Files;
+file \opt{\it file}&use {\it file} for both symbols and executable;
+with no arg, discard both\cr
+core \opt{\it file}&read {\it file} as coredump; or discard\cr
+exec \opt{\it file}&use {\it file} as executable only; or discard\cr
+symbol \opt{\it file}&use symbol table from {\it file}; or discard\cr
+load {\it file}&dynamically link {\it file\/} and add its symbols\cr
+add-sym {\it file} {\it addr}&read additional symbols from {\it file},
+dynamically loaded at {\it addr}\cr
+info files&display working files and targets in use\cr
+path {\it dirs}&add {\it dirs} to front of path searched for
+executable and symbol files\cr
+show path&display executable and symbol file path\cr
+info share&list names of shared libraries currently loaded\cr
+\endsec
+
+\vfill\eject
+\sec Source Files;
+dir {\it names}&add directory {\it names} to front of source path\cr
+dir&clear source path\cr
+show dir&show current source path\cr
+\cr
+list&show next ten lines of source\cr
+list -&show previous ten lines\cr
+list {\it lines}&display source surrounding {\it lines}, 
+specified as:\cr
+\quad{\opt{\it file\tt:}\it num}&line number \opt{in named file}\cr
+\quad{\opt{\it file\tt:}\it function}&beginning of function \opt{in
+named file}\cr
+\quad{\tt +\it off}&{\it off} lines after last printed\cr
+\quad{\tt -\it off}&{\it off} lines previous to last printed\cr
+\quad{\tt*\it address}&line containing {\it address}\cr
+list {\it f},{\it l}&from line {\it f} to line {\it l}\cr
+info line {\it num}&show starting, ending addresses of compiled code for
+source line {\it num}\cr
+info source&show name of current source file\cr
+info sources&list all source files in use\cr
+forw {\it regex}&search following source lines for {\it regex}\cr
+rev {\it regex}&search preceding source lines for {\it regex}\cr
+\endsec
+
+\sec GDB under GNU Emacs;
+M-x gdb&run GDB under Emacs\cr
+\ctl{h} m&describe GDB mode\cr
+M-s&step one line ({\tt step})\cr
+M-n&next line ({\tt next})\cr
+M-i&step one instruction ({\tt stepi})\cr
+\ctl{c} \ctl{f}&finish current stack frame ({\tt finish})\cr
+M-c&continue ({\tt cont})\cr
+M-u&up {\it arg} frames ({\tt up})\cr
+M-d&down {\it arg} frames ({\tt down})\cr
+\ctl{x} \&&copy number from point, insert at end\cr
+\ctl{x} SPC&(in source file) set break at point\cr
+\endsec
+
+\sec GDB License;
+show copying&Display GNU General Public License\cr
+show warranty&There is NO WARRANTY for GDB.  Display full no-warranty
+statement.\cr 
+\endsec
+
+
+\vfill
+{\smrm\parskip=6pt
+\centerline{Copyright \copyright 1991, '92, '93, '98 Free Software Foundation, Inc.}
+\centerline{Roland H. Pesch}
+\centerline{The author assumes no responsibility for any errors on this card.}
+
+This card may be freely distributed under the terms of the GNU
+General Public License.
+
+\centerline{Please contribute to development of this card by
+annotating it.  Improvements can be sent to bug-gdb@gnu.org.}
+
+GDB itself is free software; you are welcome to distribute copies of
+it under the terms of the GNU General Public License.  There is
+absolutely no warranty for GDB.
+}
+\end
diff --git a/gdb/doc/remote.texi b/gdb/doc/remote.texi
new file mode 100644
index 0000000..816b658
--- /dev/null
+++ b/gdb/doc/remote.texi
@@ -0,0 +1,1708 @@
+@c								-*- Texinfo -*-
+@c Copyright (c) 1990 1991 1992 1993 Free Software Foundation, Inc.
+@c This file is part of the source for the GDB manual.
+@c This text diverted to "Remote Debugging" section in general case;
+@c however, if we're doing a manual specifically for one of these, it
+@c belongs up front (in "Getting In and Out" chapter).
+
+@ifset REMOTESTUB
+@node Remote Serial
+@subsection The @value{GDBN} remote serial protocol
+
+@cindex remote serial debugging, overview
+To debug a program running on another machine (the debugging
+@dfn{target} machine), you must first arrange for all the usual
+prerequisites for the program to run by itself.  For example, for a C
+program, you need:
+
+@enumerate
+@item
+A startup routine to set up the C runtime environment; these usually
+have a name like @file{crt0}.  The startup routine may be supplied by
+your hardware supplier, or you may have to write your own.
+
+@item 
+You probably need a C subroutine library to support your program's
+subroutine calls, notably managing input and output.
+
+@item
+A way of getting your program to the other machine---for example, a
+download program.  These are often supplied by the hardware
+manufacturer, but you may have to write your own from hardware
+documentation.
+@end enumerate
+
+The next step is to arrange for your program to use a serial port to
+communicate with the machine where @value{GDBN} is running (the @dfn{host}
+machine).  In general terms, the scheme looks like this:
+
+@table @emph
+@item On the host,
+@value{GDBN} already understands how to use this protocol; when everything
+else is set up, you can simply use the @samp{target remote} command
+(@pxref{Targets,,Specifying a Debugging Target}).
+
+@item On the target,
+you must link with your program a few special-purpose subroutines that
+implement the @value{GDBN} remote serial protocol.  The file containing these
+subroutines is called  a @dfn{debugging stub}.
+
+@ifset GDBSERVER
+On certain remote targets, you can use an auxiliary program
+@code{gdbserver} instead of linking a stub into your program.
+@xref{Server,,Using the @code{gdbserver} program}, for details.
+@end ifset
+@end table
+
+The debugging stub is specific to the architecture of the remote
+machine; for example, use @file{sparc-stub.c} to debug programs on
+@sc{sparc} boards.
+
+@cindex remote serial stub list
+These working remote stubs are distributed with @value{GDBN}:
+
+@table @code
+
+@item i386-stub.c
+@kindex i386-stub.c
+@cindex Intel
+@cindex i386
+For Intel 386 and compatible architectures.
+
+@item m68k-stub.c
+@kindex m68k-stub.c
+@cindex Motorola 680x0
+@cindex m680x0
+For Motorola 680x0 architectures.
+
+@item sh-stub.c
+@kindex sh-stub.c
+@cindex Hitachi
+@cindex SH
+For Hitachi SH architectures.
+
+@item sparc-stub.c
+@kindex sparc-stub.c
+@cindex Sparc
+For @sc{sparc} architectures.
+
+@item sparcl-stub.c
+@kindex sparcl-stub.c
+@cindex Fujitsu
+@cindex SparcLite
+For Fujitsu @sc{sparclite} architectures.
+
+@end table
+
+The @file{README} file in the @value{GDBN} distribution may list other
+recently added stubs.
+
+@menu
+* Stub Contents::       What the stub can do for you
+* Bootstrapping::       What you must do for the stub
+* Debug Session::       Putting it all together
+* Protocol::            Outline of the communication protocol
+@ifset GDBSERVER
+* Server::		Using the `gdbserver' program
+@end ifset
+@ifset GDBSERVE
+* NetWare::		Using the `gdbserve.nlm' program
+@end ifset
+@end menu
+
+@node Stub Contents
+@subsubsection What the stub can do for you
+
+@cindex remote serial stub
+The debugging stub for your architecture supplies these three
+subroutines:
+
+@table @code
+@item set_debug_traps
+@kindex set_debug_traps
+@cindex remote serial stub, initialization
+This routine arranges for @code{handle_exception} to run when your
+program stops.  You must call this subroutine explicitly near the
+beginning of your program.
+
+@item handle_exception
+@kindex handle_exception
+@cindex remote serial stub, main routine
+This is the central workhorse, but your program never calls it
+explicitly---the setup code arranges for @code{handle_exception} to
+run when a trap is triggered.
+
+@code{handle_exception} takes control when your program stops during
+execution (for example, on a breakpoint), and mediates communications
+with @value{GDBN} on the host machine.  This is where the communications
+protocol is implemented; @code{handle_exception} acts as the @value{GDBN}
+representative on the target machine; it begins by sending summary
+information on the state of your program, then continues to execute,
+retrieving and transmitting any information @value{GDBN} needs, until you
+execute a @value{GDBN} command that makes your program resume; at that point,
+@code{handle_exception} returns control to your own code on the target
+machine. 
+
+@item breakpoint
+@cindex @code{breakpoint} subroutine, remote
+Use this auxiliary subroutine to make your program contain a
+breakpoint.  Depending on the particular situation, this may be the only
+way for @value{GDBN} to get control.  For instance, if your target
+machine has some sort of interrupt button, you won't need to call this;
+pressing the interrupt button transfers control to
+@code{handle_exception}---in effect, to @value{GDBN}.  On some machines,
+simply receiving characters on the serial port may also trigger a trap;
+again, in that situation, you don't need to call @code{breakpoint} from
+your own program---simply running @samp{target remote} from the host
+@value{GDBN} session gets control.  
+
+Call @code{breakpoint} if none of these is true, or if you simply want
+to make certain your program stops at a predetermined point for the
+start of your debugging session.
+@end table
+
+@node Bootstrapping
+@subsubsection What you must do for the stub
+
+@cindex remote stub, support routines
+The debugging stubs that come with @value{GDBN} are set up for a particular
+chip architecture, but they have no information about the rest of your
+debugging target machine.
+
+First of all you need to tell the stub how to communicate with the
+serial port.
+
+@table @code
+@item int getDebugChar()
+@kindex getDebugChar
+Write this subroutine to read a single character from the serial port.
+It may be identical to @code{getchar} for your target system; a
+different name is used to allow you to distinguish the two if you wish.
+
+@item void putDebugChar(int)
+@kindex putDebugChar
+Write this subroutine to write a single character to the serial port.
+It may be identical to @code{putchar} for your target system; a 
+different name is used to allow you to distinguish the two if you wish.
+@end table
+
+@cindex control C, and remote debugging
+@cindex interrupting remote targets
+If you want @value{GDBN} to be able to stop your program while it is
+running, you need to use an interrupt-driven serial driver, and arrange
+for it to stop when it receives a @code{^C} (@samp{\003}, the control-C
+character).  That is the character which @value{GDBN} uses to tell the
+remote system to stop.
+
+Getting the debugging target to return the proper status to @value{GDBN}
+probably requires changes to the standard stub; one quick and dirty way
+is to just execute a breakpoint instruction (the ``dirty'' part is that
+@value{GDBN} reports a @code{SIGTRAP} instead of a @code{SIGINT}).
+
+Other routines you need to supply are:
+
+@table @code
+@item void exceptionHandler (int @var{exception_number}, void *@var{exception_address})
+@kindex exceptionHandler
+Write this function to install @var{exception_address} in the exception
+handling tables.  You need to do this because the stub does not have any
+way of knowing what the exception handling tables on your target system
+are like (for example, the processor's table might be in @sc{rom},
+containing entries which point to a table in @sc{ram}).
+@var{exception_number} is the exception number which should be changed;
+its meaning is architecture-dependent (for example, different numbers
+might represent divide by zero, misaligned access, etc).  When this
+exception occurs, control should be transferred directly to
+@var{exception_address}, and the processor state (stack, registers,
+and so on) should be just as it is when a processor exception occurs.  So if
+you want to use a jump instruction to reach @var{exception_address}, it
+should be a simple jump, not a jump to subroutine.
+
+For the 386, @var{exception_address} should be installed as an interrupt
+gate so that interrupts are masked while the handler runs.  The gate
+should be at privilege level 0 (the most privileged level).  The
+@sc{sparc} and 68k stubs are able to mask interrup themselves without
+help from @code{exceptionHandler}.
+
+@item void flush_i_cache()
+@kindex flush_i_cache
+(sparc and sparclite only) Write this subroutine to flush the
+instruction cache, if any, on your target machine.  If there is no
+instruction cache, this subroutine may be a no-op.
+
+On target machines that have instruction caches, @value{GDBN} requires this
+function to make certain that the state of your program is stable.
+@end table
+
+@noindent
+You must also make sure this library routine is available:
+
+@table @code
+@item void *memset(void *, int, int)
+@kindex memset
+This is the standard library function @code{memset} that sets an area of
+memory to a known value.  If you have one of the free versions of
+@code{libc.a}, @code{memset} can be found there; otherwise, you must
+either obtain it from your hardware manufacturer, or write your own.
+@end table
+
+If you do not use the GNU C compiler, you may need other standard
+library subroutines as well; this varies from one stub to another,
+but in general the stubs are likely to use any of the common library
+subroutines which @code{gcc} generates as inline code.
+
+
+@node Debug Session
+@subsubsection Putting it all together
+
+@cindex remote serial debugging summary
+In summary, when your program is ready to debug, you must follow these
+steps.
+
+@enumerate
+@item
+Make sure you have the supporting low-level routines
+(@pxref{Bootstrapping,,What you must do for the stub}):
+@display
+@code{getDebugChar}, @code{putDebugChar},
+@code{flush_i_cache}, @code{memset}, @code{exceptionHandler}.
+@end display
+
+@item
+Insert these lines near the top of your program:
+
+@example
+set_debug_traps();
+breakpoint();
+@end example
+
+@item
+For the 680x0 stub only, you need to provide a variable called
+@code{exceptionHook}.  Normally you just use:
+
+@example
+void (*exceptionHook)() = 0;
+@end example
+
+but if before calling @code{set_debug_traps}, you set it to point to a
+function in your program, that function is called when
+@code{@value{GDBN}} continues after stopping on a trap (for example, bus
+error).  The function indicated by @code{exceptionHook} is called with
+one parameter: an @code{int} which is the exception number.
+
+@item
+Compile and link together: your program, the @value{GDBN} debugging stub for
+your target architecture, and the supporting subroutines.
+
+@item
+Make sure you have a serial connection between your target machine and
+the @value{GDBN} host, and identify the serial port on the host.
+
+@item
+@c The "remote" target now provides a `load' command, so we should
+@c document that.  FIXME.
+Download your program to your target machine (or get it there by
+whatever means the manufacturer provides), and start it.
+
+@item
+To start remote debugging, run @value{GDBN} on the host machine, and specify
+as an executable file the program that is running in the remote machine.
+This tells @value{GDBN} how to find your program's symbols and the contents
+of its pure text.
+
+@cindex serial line, @code{target remote}
+Then establish communication using the @code{target remote} command.
+Its argument specifies how to communicate with the target
+machine---either via a devicename attached to a direct serial line, or a
+TCP port (usually to a terminal server which in turn has a serial line
+to the target).  For example, to use a serial line connected to the
+device named @file{/dev/ttyb}:
+
+@example
+target remote /dev/ttyb
+@end example
+
+@cindex TCP port, @code{target remote}
+To use a TCP connection, use an argument of the form
+@code{@var{host}:port}.  For example, to connect to port 2828 on a
+terminal server named @code{manyfarms}:
+
+@example
+target remote manyfarms:2828
+@end example
+@end enumerate
+
+Now you can use all the usual commands to examine and change data and to
+step and continue the remote program.
+
+To resume the remote program and stop debugging it, use the @code{detach}
+command.
+
+@cindex interrupting remote programs
+@cindex remote programs, interrupting
+Whenever @value{GDBN} is waiting for the remote program, if you type the
+interrupt character (often @key{C-C}), @value{GDBN} attempts to stop the
+program.  This may or may not succeed, depending in part on the hardware
+and the serial drivers the remote system uses.  If you type the
+interrupt character once again, @value{GDBN} displays this prompt:
+
+@example
+Interrupted while waiting for the program.
+Give up (and stop debugging it)?  (y or n)
+@end example
+
+If you type @kbd{y}, @value{GDBN} abandons the remote debugging session.
+(If you decide you want to try again later, you can use @samp{target
+remote} again to connect once more.)  If you type @kbd{n}, @value{GDBN}
+goes back to waiting.
+
+@node Protocol
+@subsubsection Communication protocol
+
+@cindex debugging stub, example
+@cindex remote stub, example
+@cindex stub example, remote debugging
+The stub files provided with @value{GDBN} implement the target side of the
+communication protocol, and the @value{GDBN} side is implemented in the
+@value{GDBN} source file @file{remote.c}.  Normally, you can simply allow
+these subroutines to communicate, and ignore the details.  (If you're
+implementing your own stub file, you can still ignore the details: start
+with one of the existing stub files.  @file{sparc-stub.c} is the best
+organized, and therefore the easiest to read.)
+
+However, there may be occasions when you need to know something about
+the protocol---for example, if there is only one serial port to your
+target machine, you might want your program to do something special if
+it recognizes a packet meant for @value{GDBN}.
+
+@cindex protocol, @value{GDBN} remote serial
+@cindex serial protocol, @value{GDBN} remote
+@cindex remote serial protocol
+All @value{GDBN} commands and responses (other than acknowledgements, which
+are single characters) are sent as a packet which includes a
+checksum.  A packet is introduced with the character @samp{$}, and ends
+with the character @samp{#} followed by a two-digit checksum:
+
+@example
+$@var{packet info}#@var{checksum}
+@end example
+
+@cindex checksum, for @value{GDBN} remote
+@noindent
+@var{checksum} is computed as the modulo 256 sum of the @var{packet
+info} characters.
+
+When either the host or the target machine receives a packet, the first
+response expected is an acknowledgement: a single character, either
+@samp{+} (to indicate the package was received correctly) or @samp{-}
+(to request retransmission).
+
+The host (@value{GDBN}) sends commands, and the target (the debugging stub
+incorporated in your program) sends data in response.  The target also
+sends data when your program stops.
+
+Command packets are distinguished by their first character, which
+identifies the kind of command.
+
+These are some of the commands currently supported (for a complete list of 
+commands, look in @file{gdb/remote.c.}):
+
+@table @code
+@item g
+Requests the values of CPU registers.
+
+@item G
+Sets the values of CPU registers.
+
+@item m@var{addr},@var{count}
+Read @var{count} bytes at location @var{addr}.
+
+@item M@var{addr},@var{count}:@dots{}
+Write @var{count} bytes at location @var{addr}.
+
+@need 500
+@item c
+@itemx c@var{addr}
+Resume execution at the current address (or at @var{addr} if supplied).
+
+@need 500
+@item s
+@itemx s@var{addr}
+Step the target program for one instruction, from either the current
+program counter or from @var{addr} if supplied.
+
+@item k
+Kill the target program.
+
+@item ?
+Report the most recent signal.  To allow you to take advantage of the
+@value{GDBN} signal handling commands, one of the functions of the debugging
+stub is to report CPU traps as the corresponding POSIX signal values.
+
+@item T
+Allows the remote stub to send only the registers that @value{GDBN} needs
+to make a quick decision about single-stepping or conditional breakpoints.
+This eliminates the need to fetch the entire register set for each instruction
+being stepped through.
+
+@value{GDBN} now implements a write-through cache for registers and only
+re-reads the registers if the target has run.
+@end table
+
+@kindex set remotedebug
+@kindex show remotedebug
+@cindex packets, reporting on stdout
+@cindex serial connections, debugging
+If you have trouble with the serial connection, you can use the command
+@code{set remotedebug}.  This makes @value{GDBN} report on all packets sent
+back and forth across the serial line to the remote machine.  The
+packet-debugging information is printed on the @value{GDBN} standard output
+stream.  @code{set remotedebug off} turns it off, and @code{show
+remotedebug} shows you its current state.
+
+@ifset GDBSERVER
+@node Server
+@subsubsection Using the @code{gdbserver} program
+
+@kindex gdbserver
+@cindex remote connection without stubs
+@code{gdbserver} is a control program for Unix-like systems, which
+allows you to connect your program with a remote @value{GDBN} via
+@code{target remote}---but without linking in the usual debugging stub.
+
+@code{gdbserver} is not a complete replacement for the debugging stubs,
+because it requires essentially the same operating-system facilities
+that @value{GDBN} itself does.  In fact, a system that can run
+@code{gdbserver} to connect to a remote @value{GDBN} could also run
+@value{GDBN} locally!  @code{gdbserver} is sometimes useful nevertheless,
+because it is a much smaller program than @value{GDBN} itself.  It is
+also easier to port than all of @value{GDBN}, so you may be able to get
+started more quickly on a new system by using @code{gdbserver}.
+Finally, if you develop code for real-time systems, you may find that
+the tradeoffs involved in real-time operation make it more convenient to
+do as much development work as possible on another system, for example
+by cross-compiling.  You can use @code{gdbserver} to make a similar
+choice for debugging.
+
+@value{GDBN} and @code{gdbserver} communicate via either a serial line
+or a TCP connection, using the standard @value{GDBN} remote serial
+protocol.
+
+@table @emph
+@item On the target machine,
+you need to have a copy of the program you want to debug.
+@code{gdbserver} does not need your program's symbol table, so you can
+strip the program if necessary to save space.  @value{GDBN} on the host
+system does all the symbol handling.
+
+To use the server, you must tell it how to communicate with @value{GDBN};
+the name of your program; and the arguments for your program.  The
+syntax is:
+
+@smallexample
+target> gdbserver @var{comm} @var{program} [ @var{args} @dots{} ]
+@end smallexample
+
+@var{comm} is either a device name (to use a serial line) or a TCP
+hostname and portnumber.  For example, to debug Emacs with the argument
+@samp{foo.txt} and communicate with @value{GDBN} over the serial port
+@file{/dev/com1}:
+
+@smallexample
+target> gdbserver /dev/com1 emacs foo.txt
+@end smallexample
+
+@code{gdbserver} waits passively for the host @value{GDBN} to communicate
+with it.
+
+To use a TCP connection instead of a serial line:
+
+@smallexample
+target> gdbserver host:2345 emacs foo.txt
+@end smallexample
+
+The only difference from the previous example is the first argument,
+specifying that you are communicating with the host @value{GDBN} via
+TCP.  The @samp{host:2345} argument means that @code{gdbserver} is to
+expect a TCP connection from machine @samp{host} to local TCP port 2345.
+(Currently, the @samp{host} part is ignored.)  You can choose any number
+you want for the port number as long as it does not conflict with any
+TCP ports already in use on the target system (for example, @code{23} is
+reserved for @code{telnet}).@footnote{If you choose a port number that
+conflicts with another service, @code{gdbserver} prints an error message
+and exits.} You must use the same port number with the host @value{GDBN}
+@code{target remote} command.
+
+@item On the @value{GDBN} host machine,
+you need an unstripped copy of your program, since @value{GDBN} needs
+symbols and debugging information.  Start up @value{GDBN} as usual,
+using the name of the local copy of your program as the first argument.
+(You may also need the @w{@samp{--baud}} option if the serial line is
+running at anything other than 9600 bps.)  After that, use @code{target
+remote} to establish communications with @code{gdbserver}.  Its argument
+is either a device name (usually a serial device, like
+@file{/dev/ttyb}), or a TCP port descriptor in the form
+@code{@var{host}:@var{PORT}}.  For example:
+
+@smallexample
+(@value{GDBP}) target remote /dev/ttyb
+@end smallexample
+
+@noindent
+communicates with the server via serial line @file{/dev/ttyb}, and
+
+@smallexample
+(@value{GDBP}) target remote the-target:2345
+@end smallexample
+
+@noindent
+communicates via a TCP connection to port 2345 on host @w{@file{the-target}}.
+For TCP connections, you must start up @code{gdbserver} prior to using
+the @code{target remote} command.  Otherwise you may get an error whose
+text depends on the host system, but which usually looks something like
+@samp{Connection refused}.
+@end table
+@end ifset
+
+@ifset GDBSERVE
+@node NetWare
+@subsubsection Using the @code{gdbserve.nlm} program
+
+@kindex gdbserve.nlm
+@code{gdbserve.nlm} is a control program for NetWare systems, which
+allows you to connect your program with a remote @value{GDBN} via
+@code{target remote}.
+
+@value{GDBN} and @code{gdbserve.nlm} communicate via a serial line,
+using the standard @value{GDBN} remote serial protocol.
+
+@table @emph
+@item On the target machine,
+you need to have a copy of the program you want to debug.
+@code{gdbserve.nlm} does not need your program's symbol table, so you
+can strip the program if necessary to save space.  @value{GDBN} on the
+host system does all the symbol handling.
+
+To use the server, you must tell it how to communicate with
+@value{GDBN}; the name of your program; and the arguments for your
+program.  The syntax is:
+
+@smallexample 
+load gdbserve [ BOARD=@var{board} ] [ PORT=@var{port} ]
+              [ BAUD=@var{baud} ] @var{program} [ @var{args} @dots{} ]
+@end smallexample
+
+@var{board} and @var{port} specify the serial line; @var{baud} specifies
+the baud rate used by the connection.  @var{port} and @var{node} default
+to 0, @var{baud} defaults to 9600 bps.
+
+For example, to debug Emacs with the argument @samp{foo.txt}and
+communicate with @value{GDBN} over serial port number 2 or board 1 
+using a 19200 bps connection:
+
+@smallexample
+load gdbserve BOARD=1 PORT=2 BAUD=19200 emacs foo.txt
+@end smallexample
+
+@item On the @value{GDBN} host machine,
+you need an unstripped copy of your program, since @value{GDBN} needs
+symbols and debugging information.  Start up @value{GDBN} as usual,
+using the name of the local copy of your program as the first argument.
+(You may also need the @w{@samp{--baud}} option if the serial line is
+running at anything other than 9600 bps.  After that, use @code{target
+remote} to establish communications with @code{gdbserve.nlm}.  Its
+argument is a device name (usually a serial device, like
+@file{/dev/ttyb}).  For example:
+
+@smallexample
+(@value{GDBP}) target remote /dev/ttyb
+@end smallexample
+
+@noindent
+communications with the server via serial line @file{/dev/ttyb}.
+@end table
+@end ifset
+
+@end ifset
+
+@ifset I960
+@node i960-Nindy Remote
+@subsection @value{GDBN} with a remote i960 (Nindy)
+
+@cindex Nindy
+@cindex i960
+@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems.  When
+@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can
+tell @value{GDBN} how to connect to the 960 in several ways:
+
+@itemize @bullet
+@item
+Through command line options specifying serial port, version of the
+Nindy protocol, and communications speed;
+
+@item
+By responding to a prompt on startup;
+
+@item
+By using the @code{target} command at any point during your @value{GDBN}
+session.  @xref{Target Commands, ,Commands for managing targets}.
+
+@end itemize
+
+@menu
+* Nindy Startup::               Startup with Nindy
+* Nindy Options::               Options for Nindy
+* Nindy Reset::                 Nindy reset command
+@end menu
+
+@node Nindy Startup
+@subsubsection Startup with Nindy
+
+If you simply start @code{@value{GDBP}} without using any command-line
+options, you are prompted for what serial port to use, @emph{before} you
+reach the ordinary @value{GDBN} prompt:
+
+@example
+Attach /dev/ttyNN -- specify NN, or "quit" to quit:  
+@end example
+
+@noindent
+Respond to the prompt with whatever suffix (after @samp{/dev/tty})
+identifies the serial port you want to use.  You can, if you choose,
+simply start up with no Nindy connection by responding to the prompt
+with an empty line.  If you do this and later wish to attach to Nindy,
+use @code{target} (@pxref{Target Commands, ,Commands for managing targets}).
+
+@node Nindy Options
+@subsubsection Options for Nindy
+
+These are the startup options for beginning your @value{GDBN} session with a
+Nindy-960 board attached:
+
+@table @code
+@item -r @var{port}
+Specify the serial port name of a serial interface to be used to connect
+to the target system.  This option is only available when @value{GDBN} is
+configured for the Intel 960 target architecture.  You may specify
+@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
+device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
+suffix for a specific @code{tty} (e.g. @samp{-r a}).
+
+@item -O
+(An uppercase letter ``O'', not a zero.)  Specify that @value{GDBN} should use
+the ``old'' Nindy monitor protocol to connect to the target system.
+This option is only available when @value{GDBN} is configured for the Intel 960
+target architecture.
+
+@quotation
+@emph{Warning:} if you specify @samp{-O}, but are actually trying to
+connect to a target system that expects the newer protocol, the connection
+fails, appearing to be a speed mismatch.  @value{GDBN} repeatedly
+attempts to reconnect at several different line speeds.  You can abort
+this process with an interrupt.
+@end quotation
+
+@item -brk
+Specify that @value{GDBN} should first send a @code{BREAK} signal to the target
+system, in an attempt to reset it, before connecting to a Nindy target.
+
+@quotation
+@emph{Warning:} Many target systems do not have the hardware that this
+requires; it only works with a few boards.
+@end quotation
+@end table
+
+The standard @samp{-b} option controls the line speed used on the serial
+port.
+
+@c @group
+@node Nindy Reset
+@subsubsection Nindy reset command
+
+@table @code
+@item reset
+@kindex reset
+For a Nindy target, this command sends a ``break'' to the remote target
+system; this is only useful if the target has been equipped with a
+circuit to perform a hard reset (or some other interesting action) when
+a break is detected.
+@end table
+@c @end group
+@end ifset
+
+@ifset AMD29K
+@node UDI29K Remote
+@subsection The UDI protocol for AMD29K
+
+@cindex UDI
+@cindex AMD29K via UDI
+@value{GDBN} supports AMD's UDI (``Universal Debugger Interface'')
+protocol for debugging the a29k processor family.  To use this
+configuration with AMD targets running the MiniMON monitor, you need the
+program @code{MONTIP}, available from AMD at no charge.  You can also
+use @value{GDBN} with the UDI-conformant a29k simulator program
+@code{ISSTIP}, also available from AMD.
+
+@table @code
+@item target udi @var{keyword}
+@kindex udi
+Select the UDI interface to a remote a29k board or simulator, where
+@var{keyword} is an entry in the AMD configuration file @file{udi_soc}.
+This file contains keyword entries which specify parameters used to
+connect to a29k targets.  If the @file{udi_soc} file is not in your
+working directory, you must set the environment variable @samp{UDICONF}
+to its pathname.
+@end table
+
+@node EB29K Remote
+@subsection The EBMON protocol for AMD29K
+
+@cindex EB29K board
+@cindex running 29K programs
+
+AMD distributes a 29K development board meant to fit in a PC, together
+with a DOS-hosted monitor program called @code{EBMON}.  As a shorthand
+term, this development system is called the ``EB29K''.  To use
+@value{GDBN} from a Unix system to run programs on the EB29K board, you
+must first connect a serial cable between the PC (which hosts the EB29K
+board) and a serial port on the Unix system.  In the following, we
+assume you've hooked the cable between the PC's @file{COM1} port and
+@file{/dev/ttya} on the Unix system.
+
+@menu
+* Comms (EB29K)::               Communications setup
+* gdb-EB29K::                   EB29K cross-debugging
+* Remote Log::                  Remote log
+@end menu
+
+@node Comms (EB29K)
+@subsubsection Communications setup
+
+The next step is to set up the PC's port, by doing something like this
+in DOS on the PC:
+
+@example
+C:\> MODE com1:9600,n,8,1,none
+@end example
+
+@noindent
+This example---run on an MS DOS 4.0 system---sets the PC port to 9600
+bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
+you must match the communications parameters when establishing the Unix
+end of the connection as well.
+@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
+@c       mean?  It's optional; leave it out? ---doc@cygnus.com, 25feb91 
+
+To give control of the PC to the Unix side of the serial line, type
+the following at the DOS console:
+
+@example
+C:\> CTTY com1
+@end example
+
+@noindent
+(Later, if you wish to return control to the DOS console, you can use
+the command @code{CTTY con}---but you must send it over the device that
+had control, in our example over the @file{COM1} serial line).
+
+From the Unix host, use a communications program such as @code{tip} or
+@code{cu} to communicate with the PC; for example,
+
+@example
+cu -s 9600 -l /dev/ttya
+@end example
+
+@noindent
+The @code{cu} options shown specify, respectively, the linespeed and the
+serial port to use.  If you use @code{tip} instead, your command line
+may look something like the following:
+
+@example
+tip -9600 /dev/ttya
+@end example
+
+@noindent
+Your system may require a different name where we show
+@file{/dev/ttya} as the argument to @code{tip}.  The communications
+parameters, including which port to use, are associated with the
+@code{tip} argument in the ``remote'' descriptions file---normally the
+system table @file{/etc/remote}.
+@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
+@c the DOS side's comms setup?  cu can support -o (odd
+@c parity), -e (even parity)---apparently no settings for no parity or
+@c for character size.  Taken from stty maybe...?  John points out tip
+@c can set these as internal variables, eg ~s parity=none; man stty
+@c suggests that it *might* work to stty these options with stdin or
+@c stdout redirected... ---doc@cygnus.com, 25feb91
+
+@kindex EBMON
+Using the @code{tip} or @code{cu} connection, change the DOS working
+directory to the directory containing a copy of your 29K program, then
+start the PC program @code{EBMON} (an EB29K control program supplied
+with your board by AMD).  You should see an initial display from
+@code{EBMON} similar to the one that follows, ending with the
+@code{EBMON} prompt @samp{#}---
+
+@example
+C:\> G:
+
+G:\> CD \usr\joe\work29k
+
+G:\USR\JOE\WORK29K> EBMON
+Am29000 PC Coprocessor Board Monitor, version 3.0-18
+Copyright 1990 Advanced Micro Devices, Inc.
+Written by Gibbons and Associates, Inc.
+
+Enter '?' or 'H' for help
+
+PC Coprocessor Type   = EB29K
+I/O Base              = 0x208
+Memory Base           = 0xd0000
+
+Data Memory Size      = 2048KB
+Available I-RAM Range = 0x8000 to 0x1fffff
+Available D-RAM Range = 0x80002000 to 0x801fffff
+
+PageSize              = 0x400
+Register Stack Size   = 0x800
+Memory Stack Size     = 0x1800
+
+CPU PRL               = 0x3
+Am29027 Available     = No
+Byte Write Available  = Yes
+
+# ~.
+@end example
+
+Then exit the @code{cu} or @code{tip} program (done in the example by
+typing @code{~.} at the @code{EBMON} prompt).  @code{EBMON} keeps
+running, ready for @value{GDBN} to take over.
+
+For this example, we've assumed what is probably the most convenient
+way to make sure the same 29K program is on both the PC and the Unix
+system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
+PC as a file system on the Unix host.  If you do not have PC/NFS or
+something similar connecting the two systems, you must arrange some
+other way---perhaps floppy-disk transfer---of getting the 29K program
+from the Unix system to the PC; @value{GDBN} does @emph{not} download it over the
+serial line.
+
+@node gdb-EB29K
+@subsubsection EB29K cross-debugging
+
+Finally, @code{cd} to the directory containing an image of your 29K
+program on the Unix system, and start @value{GDBN}---specifying as argument the
+name of your 29K program:
+
+@example
+cd /usr/joe/work29k
+@value{GDBP} myfoo
+@end example
+
+@need 500
+Now you can use the @code{target} command:
+
+@example
+target amd-eb /dev/ttya 9600 MYFOO
+@c FIXME: test above 'target amd-eb' as spelled, with caps!  caps are meant to
+@c emphasize that this is the name as seen by DOS (since I think DOS is
+@c single-minded about case of letters).  ---doc@cygnus.com, 25feb91
+@end example
+
+@noindent
+In this example, we've assumed your program is in a file called
+@file{myfoo}.  Note that the filename given as the last argument to
+@code{target amd-eb} should be the name of the program as it appears to DOS.
+In our example this is simply @code{MYFOO}, but in general it can include
+a DOS path, and depending on your transfer mechanism may not resemble
+the name on the Unix side.
+
+At this point, you can set any breakpoints you wish; when you are ready
+to see your program run on the 29K board, use the @value{GDBN} command
+@code{run}.
+
+To stop debugging the remote program, use the @value{GDBN} @code{detach}
+command.
+
+To return control of the PC to its console, use @code{tip} or @code{cu}
+once again, after your @value{GDBN} session has concluded, to attach to
+@code{EBMON}.  You can then type the command @code{q} to shut down
+@code{EBMON}, returning control to the DOS command-line interpreter.
+Type @code{CTTY con} to return command input to the main DOS console,
+and type @kbd{~.} to leave @code{tip} or @code{cu}.
+
+@node Remote Log
+@subsubsection Remote log
+@kindex eb.log
+@cindex log file for EB29K
+
+The @code{target amd-eb} command creates a file @file{eb.log} in the
+current working directory, to help debug problems with the connection.
+@file{eb.log} records all the output from @code{EBMON}, including echoes
+of the commands sent to it.  Running @samp{tail -f} on this file in
+another window often helps to understand trouble with @code{EBMON}, or
+unexpected events on the PC side of the connection.
+
+@end ifset
+
+@ifset ST2000
+@node ST2000 Remote
+@subsection @value{GDBN} with a Tandem ST2000
+
+To connect your ST2000 to the host system, see the manufacturer's
+manual.  Once the ST2000 is physically attached, you can run:
+
+@example
+target st2000 @var{dev} @var{speed}
+@end example
+
+@noindent
+to establish it as your debugging environment.  @var{dev} is normally
+the name of a serial device, such as @file{/dev/ttya}, connected to the
+ST2000 via a serial line.  You can instead specify @var{dev} as a TCP
+connection (for example, to a serial line attached via a terminal
+concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
+
+The @code{load} and @code{attach} commands are @emph{not} defined for
+this target; you must load your program into the ST2000 as you normally
+would for standalone operation.  @value{GDBN} reads debugging information
+(such as symbols) from a separate, debugging version of the program
+available on your host computer.
+@c FIXME!! This is terribly vague; what little content is here is
+@c basically hearsay.
+
+@cindex ST2000 auxiliary commands
+These auxiliary @value{GDBN} commands are available to help you with the ST2000
+environment:
+
+@table @code
+@item st2000 @var{command}
+@kindex st2000 @var{cmd}
+@cindex STDBUG commands (ST2000)
+@cindex commands to STDBUG (ST2000)
+Send a @var{command} to the STDBUG monitor.  See the manufacturer's
+manual for available commands.
+
+@item connect
+@cindex connect (to STDBUG)
+Connect the controlling terminal to the STDBUG command monitor.  When
+you are done interacting with STDBUG, typing either of two character
+sequences gets you back to the @value{GDBN} command prompt:
+@kbd{@key{RET}~.} (Return, followed by tilde and period) or
+@kbd{@key{RET}~@key{C-d}} (Return, followed by tilde and control-D).
+@end table
+@end ifset
+
+@ifset VXWORKS
+@node VxWorks Remote
+@subsection @value{GDBN} and VxWorks
+@cindex VxWorks
+
+@value{GDBN} enables developers to spawn and debug tasks running on networked
+VxWorks targets from a Unix host.  Already-running tasks spawned from
+the VxWorks shell can also be debugged.  @value{GDBN} uses code that runs on
+both the Unix host and on the VxWorks target.  The program
+@code{gdb} is installed and executed on the Unix host.  (It may be
+installed with the name @code{vxgdb}, to distinguish it from a
+@value{GDBN} for debugging programs on the host itself.)
+
+@table @code
+@item VxWorks-timeout @var{args}
+@kindex vxworks-timeout
+All VxWorks-based targets now support the option @code{vxworks-timeout}.  
+This option is set by the user, and  @var{args} represents the number of 
+seconds @value{GDBN} waits for responses to rpc's.  You might use this if 
+your VxWorks target is a slow software simulator or is on the far side 
+of a thin network line.
+@end table
+
+The following information on connecting to VxWorks was current when
+this manual was produced; newer releases of VxWorks may use revised
+procedures.
+
+@kindex INCLUDE_RDB
+To use @value{GDBN} with VxWorks, you must rebuild your VxWorks kernel
+to include the remote debugging interface routines in the VxWorks
+library @file{rdb.a}.  To do this, define @code{INCLUDE_RDB} in the
+VxWorks configuration file @file{configAll.h} and rebuild your VxWorks
+kernel.  The resulting kernel contains @file{rdb.a}, and spawns the
+source debugging task @code{tRdbTask} when VxWorks is booted.  For more
+information on configuring and remaking VxWorks, see the manufacturer's
+manual.
+@c VxWorks, see the @cite{VxWorks Programmer's Guide}.
+
+Once you have included @file{rdb.a} in your VxWorks system image and set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}.  From your Unix host, run @code{gdb} (or @code{vxgdb},
+depending on your installation).
+
+@value{GDBN} comes up showing the prompt:
+
+@example
+(vxgdb)
+@end example
+
+@menu
+* VxWorks Connection::          Connecting to VxWorks
+* VxWorks Download::            VxWorks download
+* VxWorks Attach::              Running tasks
+@end menu
+
+@node VxWorks Connection
+@subsubsection Connecting to VxWorks
+
+The @value{GDBN} command @code{target} lets you connect to a VxWorks target on the
+network.  To connect to a target whose host name is ``@code{tt}'', type:
+
+@example
+(vxgdb) target vxworks tt
+@end example
+
+@need 750
+@value{GDBN} displays messages like these:
+
+@smallexample
+Attaching remote machine across net... 
+Connected to tt.
+@end smallexample
+
+@need 1000
+@value{GDBN} then attempts to read the symbol tables of any object modules
+loaded into the VxWorks target since it was last booted.  @value{GDBN} locates
+these files by searching the directories listed in the command search
+path (@pxref{Environment, ,Your program's environment}); if it fails
+to find an object file, it displays a message such as:
+
+@example
+prog.o: No such file or directory.
+@end example
+
+When this happens, add the appropriate directory to the search path with
+the @value{GDBN} command @code{path}, and execute the @code{target}
+command again.
+
+@node VxWorks Download
+@subsubsection VxWorks download
+
+@cindex download to VxWorks
+If you have connected to the VxWorks target and you want to debug an
+object that has not yet been loaded, you can use the @value{GDBN}
+@code{load} command to download a file from Unix to VxWorks
+incrementally.  The object file given as an argument to the @code{load}
+command is actually opened twice: first by the VxWorks target in order
+to download the code, then by @value{GDBN} in order to read the symbol
+table.  This can lead to problems if the current working directories on
+the two systems differ.  If both systems have NFS mounted the same
+filesystems, you can avoid these problems by using absolute paths.
+Otherwise, it is simplest to set the working directory on both systems
+to the directory in which the object file resides, and then to reference
+the file by its name, without any path.  For instance, a program
+@file{prog.o} may reside in @file{@var{vxpath}/vw/demo/rdb} in VxWorks
+and in @file{@var{hostpath}/vw/demo/rdb} on the host.  To load this
+program, type this on VxWorks:
+
+@example
+-> cd "@var{vxpath}/vw/demo/rdb"
+@end example
+v
+Then, in @value{GDBN}, type:
+
+@example
+(vxgdb) cd @var{hostpath}/vw/demo/rdb 
+(vxgdb) load prog.o
+@end example
+
+@value{GDBN} displays a response similar to this:
+
+@smallexample
+Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
+@end smallexample
+
+You can also use the @code{load} command to reload an object module
+after editing and recompiling the corresponding source file.  Note that
+this makes @value{GDBN} delete all currently-defined breakpoints,
+auto-displays, and convenience variables, and to clear the value
+history.  (This is necessary in order to preserve the integrity of
+debugger data structures that reference the target system's symbol
+table.)
+
+@node VxWorks Attach
+@subsubsection Running tasks
+
+@cindex running VxWorks tasks
+You can also attach to an existing task using the @code{attach} command as
+follows:
+
+@example
+(vxgdb) attach @var{task}
+@end example
+
+@noindent
+where @var{task} is the VxWorks hexadecimal task ID.  The task can be running
+or suspended when you attach to it.  Running tasks are suspended at
+the time of attachment.
+@end ifset
+
+@ifset SPARCLET
+@node Sparclet Remote
+@subsection @value{GDBN} and Sparclet
+@cindex Sparclet
+
+@value{GDBN} enables developers to debug tasks running on 
+Sparclet targets from a Unix host.  
+@value{GDBN} uses code that runs on
+both the Unix host and on the Sparclet target.  The program
+@code{gdb} is installed and executed on the Unix host.  
+
+@table @code
+@item timeout @var{args}
+@kindex remotetimeout
+@value{GDBN} now supports the option @code{remotetimeout}.  
+This option is set by the user, and  @var{args} represents the number of 
+seconds @value{GDBN} waits for responses.  
+@end table
+
+@kindex Compiling
+When compiling for debugging, include the options "-g" to get debug 
+information and "-Ttext" to relocate the program to where you wish to
+load it on the target.  You may also want to add the options "-n" or 
+"-N" in order to reduce the size of the sections.
+
+@example
+sparclet-aout-gcc prog.c -Ttext 0x12010000 -g -o prog -N
+@end example
+
+You can use objdump to verify that the addresses are what you intended.
+
+@example
+sparclet-aout-objdump --headers --syms prog
+@end example
+
+@kindex Running
+Once you have set
+your Unix execution search path to find @value{GDBN}, you are ready to
+run @value{GDBN}.  From your Unix host, run @code{gdb} 
+(or @code{sparclet-aout-gdb}, depending on your installation).
+
+@value{GDBN} comes up showing the prompt:
+
+@example
+(gdbslet)
+@end example
+
+@menu
+* Sparclet File::                Setting the file to debug
+* Sparclet Connection::          Connecting to Sparclet
+* Sparclet Download::            Sparclet download
+* Sparclet Execution::           Running and debugging 
+@end menu
+
+@node Sparclet File
+@subsubsection Setting file to debug
+
+The @value{GDBN} command @code{file} lets you choose with program to debug.
+
+@example
+(gdbslet) file prog
+@end example
+
+@need 1000
+@value{GDBN} then attempts to read the symbol table of @file{prog}.
+@value{GDBN} locates
+the file by searching the directories listed in the command search
+path.
+If the file was compiled with debug information (option "-g"), source
+files will be searched as well.
+@value{GDBN} locates
+the source files by searching the directories listed in the directory search
+path (@pxref{Environment, ,Your program's environment}).
+If it fails
+to find a file, it displays a message such as:
+
+@example
+prog: No such file or directory.
+@end example
+
+When this happens, add the appropriate directories to the search paths with
+the @value{GDBN} commands @code{path} and @code{dir}, and execute the 
+@code{target} command again.
+
+@node Sparclet Connection
+@subsubsection Connecting to Sparclet
+
+The @value{GDBN} command @code{target} lets you connect to a Sparclet target.
+To connect to a target on serial port ``@code{ttya}'', type:
+
+@example
+(gdbslet) target sparclet /dev/ttya
+Remote target sparclet connected to /dev/ttya
+main () at ../prog.c:3 
+@end example
+
+@need 750
+@value{GDBN} displays messages like these:
+
+@smallexample
+Connected to ttya.
+@end smallexample
+
+@node Sparclet Download
+@subsubsection Sparclet download
+
+@cindex download to Sparclet
+Once connected to the Sparclet target, 
+you can use the @value{GDBN}
+@code{load} command to download the file from the host to the target.
+The file name and load offset should be given as arguments to the @code{load}
+command.
+Since the file format is aout, the program must be loaded to the starting 
+address.  You can use objdump to find out what this value is.  The load
+offset is an offset which is added to the VMA (virtual memory address)
+of each of the file's sections.
+For instance, if the program
+@file{prog} was linked to text address 0x1201000, with data at 0x12010160
+and bss at 0x12010170, in @value{GDBN}, type:
+
+@example
+(gdbslet) load prog 0x12010000
+Loading section .text, size 0xdb0 vma 0x12010000
+@end example
+
+If the code is loaded at a different address then what the program was linked 
+to, you may need to use the @code{section} and @code{add-symbol-file} commands 
+to tell @value{GDBN} where to map the symbol table.
+
+@node Sparclet Execution
+@subsubsection Running and debugging
+
+@cindex running and debugging Sparclet programs
+You can now begin debugging the task using @value{GDBN}'s execution control
+commands, @code{b}, @code{step}, @code{run}, etc.  See the @value{GDBN} 
+manual for the list of commands.
+
+@example
+(gdbslet) b main
+Breakpoint 1 at 0x12010000: file prog.c, line 3.
+(gdbslet) run 
+Starting program: prog
+Breakpoint 1, main (argc=1, argv=0xeffff21c) at prog.c:3
+3        char *symarg = 0;
+(gdbslet) step
+4        char *execarg = "hello!";
+(gdbslet)                           
+@end example
+
+@end ifset
+
+@ifset H8
+@node Hitachi Remote
+@subsection @value{GDBN} and Hitachi microprocessors
+@value{GDBN} needs to know these things to talk to your
+Hitachi SH, H8/300, or H8/500: 
+
+@enumerate
+@item
+that you want to use @samp{target hms}, the remote debugging interface
+for Hitachi microprocessors, or @samp{target e7000}, the in-circuit
+emulator for the Hitachi SH and the Hitachi 300H.  (@samp{target hms} is
+the default when GDB is configured specifically for the Hitachi SH,
+H8/300, or H8/500.)
+
+@item
+what serial device connects your host to your Hitachi board (the first
+serial device available on your host is the default).
+
+@ifclear H8EXCLUSIVE
+@c this is only for Unix hosts, not of interest to Hitachi
+@item
+what speed to use over the serial device.
+@end ifclear
+@end enumerate
+
+@menu
+* Hitachi Boards::      Connecting to Hitachi boards.
+* Hitachi ICE::         Using the E7000 In-Circuit Emulator.
+* Hitachi Special::     Special @value{GDBN} commands for Hitachi micros.
+@end menu
+
+@node Hitachi Boards
+@subsubsection Connecting to Hitachi boards
+
+@ifclear H8EXCLUSIVE
+@c only for Unix hosts
+@kindex device
+@cindex serial device, Hitachi micros
+Use the special @code{@value{GDBP}} command @samp{device @var{port}} if you
+need to explicitly set the serial device.  The default @var{port} is the
+first available port on your host.  This is only necessary on Unix
+hosts, where it is typically something like @file{/dev/ttya}.
+
+@kindex speed
+@cindex serial line speed, Hitachi micros
+@code{@value{GDBP}} has another special command to set the communications
+speed: @samp{speed @var{bps}}.  This command also is only used from Unix
+hosts; on DOS hosts, set the line speed as usual from outside GDB with
+the DOS @kbd{mode} command (for instance, @w{@samp{mode
+com2:9600,n,8,1,p}} for a 9600 bps connection).
+
+The @samp{device} and @samp{speed} commands are available only when you
+use a Unix host to debug your Hitachi microprocessor programs.  If you
+use a DOS host,
+@end ifclear
+@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
+called @code{asynctsr} to communicate with the development board
+through a PC serial port.  You must also use the DOS @code{mode} command
+to set up the serial port on the DOS side.
+
+@ifset DOSHOST
+The following sample session illustrates the steps needed to start a
+program under @value{GDBN} control on an H8/300.  The example uses a
+sample H8/300 program called @file{t.x}.  The procedure is the same for
+the Hitachi SH and the H8/500.
+
+First hook up your development board.  In this example, we use a
+board attached to serial port @code{COM2}; if you use a different serial
+port, substitute its name in the argument of the @code{mode} command.
+When you call @code{asynctsr}, the auxiliary comms program used by the
+degugger, you give it just the numeric part of the serial port's name;
+for example, @samp{asyncstr 2} below runs @code{asyncstr} on
+@code{COM2}.
+
+@example
+C:\H8300\TEST> asynctsr 2
+C:\H8300\TEST> mode com2:9600,n,8,1,p
+
+Resident portion of MODE loaded
+
+COM2: 9600, n, 8, 1, p
+
+@end example
+
+@quotation
+@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
+@code{asynctsr}.  If you also run PC-NFS on your DOS host, you may need to
+disable it, or even boot without it, to use @code{asynctsr} to control
+your development board.
+@end quotation
+
+@kindex target hms
+Now that serial communications are set up, and the development board is
+connected, you can start up @value{GDBN}.  Call @code{@value{GDBP}} with
+the name of your program as the argument.  @code{@value{GDBP}} prompts
+you, as usual, with the prompt @samp{(@value{GDBP})}.  Use two special
+commands to begin your debugging session: @samp{target hms} to specify
+cross-debugging to the Hitachi board, and the @code{load} command to
+download your program to the board.  @code{load} displays the names of
+the program's sections, and a @samp{*} for each 2K of data downloaded.
+(If you want to refresh @value{GDBN} data on symbols or on the
+executable file without downloading, use the @value{GDBN} commands
+@code{file} or @code{symbol-file}.  These commands, and @code{load}
+itself, are described in @ref{Files,,Commands to specify files}.)
+
+@smallexample
+(eg-C:\H8300\TEST) @value{GDBP} t.x
+GDB is free software and you are welcome to distribute copies
+ of it under certain conditions; type "show copying" to see 
+ the conditions.
+There is absolutely no warranty for GDB; type "show warranty" 
+for details.
+GDB @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
+(gdb) target hms
+Connected to remote H8/300 HMS system.
+(gdb) load t.x
+.text   : 0x8000 .. 0xabde ***********
+.data   : 0xabde .. 0xad30 *
+.stack  : 0xf000 .. 0xf014 *
+@end smallexample
+
+At this point, you're ready to run or debug your program.  From here on,
+you can use all the usual @value{GDBN} commands.  The @code{break} command
+sets breakpoints; the @code{run} command starts your program;
+@code{print} or @code{x} display data; the @code{continue} command
+resumes execution after stopping at a breakpoint.  You can use the
+@code{help} command at any time to find out more about @value{GDBN} commands.
+
+Remember, however, that @emph{operating system} facilities aren't
+available on your development board; for example, if your program hangs,
+you can't send an interrupt---but you can press the @sc{reset} switch!
+
+Use the @sc{reset} button on the development board
+@itemize @bullet
+@item
+to interrupt your program (don't use @kbd{ctl-C} on the DOS host---it has
+no way to pass an interrupt signal to the development board); and
+
+@item
+to return to the @value{GDBN} command prompt after your program finishes
+normally.  The communications protocol provides no other way for @value{GDBN}
+to detect program completion.
+@end itemize
+
+In either case, @value{GDBN} sees the effect of a @sc{reset} on the
+development board as a ``normal exit'' of your program.
+@end ifset
+
+@node Hitachi ICE
+@subsubsection Using the E7000 in-circuit emulator
+
+@kindex target e7000
+You can use the E7000 in-circuit emulator to develop code for either the
+Hitachi SH or the H8/300H.  Use one of these forms of the @samp{target
+e7000} command to connect @value{GDBN} to your E7000:
+
+@table @code
+@item target e7000 @var{port} @var{speed}
+Use this form if your E7000 is connected to a serial port.  The
+@var{port} argument identifies what serial port to use (for example,
+@samp{com2}).  The third argument is the line speed in bits per second
+(for example, @samp{9600}).
+
+@item target e7000 @var{hostname}
+If your E7000 is installed as a host on a TCP/IP network, you can just
+specify its hostname; @value{GDBN} uses @code{telnet} to connect.
+@end table
+
+@node Hitachi Special
+@subsubsection Special @value{GDBN} commands for Hitachi micros
+
+Some @value{GDBN} commands are available only on the H8/300 or the
+H8/500 configurations:
+
+@table @code
+@kindex set machine
+@kindex show machine
+@item set machine h8300
+@itemx set machine h8300h
+Condition @value{GDBN} for one of the two variants of the H8/300
+architecture with @samp{set machine}.  You can use @samp{show machine}
+to check which variant is currently in effect.
+
+@kindex set memory @var{mod}
+@cindex memory models, H8/500
+@item set memory @var{mod}
+@itemx show memory
+Specify which H8/500 memory model (@var{mod}) you are using with
+@samp{set memory}; check which memory model is in effect with @samp{show
+memory}.  The accepted values for @var{mod} are @code{small},
+@code{big}, @code{medium}, and @code{compact}.
+@end table
+
+@end ifset
+
+@ifset MIPS
+@node MIPS Remote
+@subsection @value{GDBN} and remote MIPS boards
+
+@cindex MIPS boards
+@value{GDBN} can use the MIPS remote debugging protocol to talk to a
+MIPS board attached to a serial line.  This is available when
+you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
+
+@need 1000
+Use these @value{GDBN} commands to specify the connection to your target board:
+
+@table @code
+@item target mips @var{port}
+@kindex target mips @var{port}
+To run a program on the board, start up @code{@value{GDBP}} with the
+name of your program as the argument.  To connect to the board, use the
+command @samp{target mips @var{port}}, where @var{port} is the name of
+the serial port connected to the board.  If the program has not already
+been downloaded to the board, you may use the @code{load} command to
+download it.  You can then use all the usual @value{GDBN} commands.
+
+For example, this sequence connects to the target board through a serial
+port, and loads and runs a program called @var{prog} through the
+debugger:
+
+@example
+host$ @value{GDBP} @var{prog}
+GDB is free software and @dots{}
+(gdb) target mips /dev/ttyb
+(gdb) load @var{prog}
+(gdb) run
+@end example
+
+@item target mips @var{hostname}:@var{portnumber}
+On some @value{GDBN} host configurations, you can specify a TCP
+connection (for instance, to a serial line managed by a terminal
+concentrator) instead of a serial port, using the syntax
+@samp{@var{hostname}:@var{portnumber}}.
+
+@item target pmon @var{port}
+@kindex target pmon @var{port}
+
+@item target ddb @var{port}
+@kindex target ddb @var{port}
+
+@item target lsi @var{port}
+@kindex target lsi @var{port}
+
+@end table
+
+
+@noindent
+@value{GDBN} also supports these special commands for MIPS targets:
+
+@table @code
+@item set processor @var{args}
+@itemx show processor
+@kindex set processor @var{args}
+@kindex show processor
+Use the @code{set processor} command to set the type of MIPS
+processor when you want to access processor-type-specific registers.
+For example, @code{set processor @var{r3041}} tells @value{GDBN} 
+to use the CPO registers appropriate for the 3041 chip.
+Use the @code{show processor} command to see what MIPS processor @value{GDBN} 
+is using.  Use the @code{info reg} command to see what registers
+@value{GDBN} is using. 
+
+@item set mipsfpu double
+@itemx set mipsfpu single
+@itemx set mipsfpu none
+@itemx show mipsfpu
+@kindex set mipsfpu
+@kindex show mipsfpu
+@cindex MIPS remote floating point
+@cindex floating point, MIPS remote
+If your target board does not support the MIPS floating point
+coprocessor, you should use the command @samp{set mipsfpu none} (if you
+need this, you may wish to put the command in your @value{GDBINIT}
+file).  This tells @value{GDBN} how to find the return value of
+functions which return floating point values.  It also allows
+@value{GDBN} to avoid saving the floating point registers when calling
+functions on the board.  If you are using a floating point coprocessor
+with only single precision floating point support, as on the @sc{r4650}
+processor, use the command @samp{set mipsfpu single}.  The default
+double precision floating point coprocessor may be selected using
+@samp{set mipsfpu double}.
+
+In previous versions the only choices were double precision or no
+floating point, so @samp{set mipsfpu on} will select double precision
+and @samp{set mipsfpu off} will select no floating point.
+
+As usual, you can inquire about the @code{mipsfpu} variable with
+@samp{show mipsfpu}.
+
+@item set remotedebug @var{n}
+@itemx show remotedebug
+@kindex set remotedebug
+@kindex show remotedebug
+@cindex @code{remotedebug}, MIPS protocol
+@cindex MIPS @code{remotedebug} protocol
+@c FIXME! For this to be useful, you must know something about the MIPS
+@c FIXME...protocol.  Where is it described?
+You can see some debugging information about communications with the board
+by setting the @code{remotedebug} variable.  If you set it to @code{1} using
+@samp{set remotedebug 1}, every packet is displayed.  If you set it
+to @code{2}, every character is displayed.  You can check the current value
+at any time with the command @samp{show remotedebug}.
+
+@item set timeout @var{seconds}
+@itemx set retransmit-timeout @var{seconds}
+@itemx show timeout
+@itemx show retransmit-timeout
+@cindex @code{timeout}, MIPS protocol
+@cindex @code{retransmit-timeout}, MIPS protocol
+@kindex set timeout
+@kindex show timeout
+@kindex set retransmit-timeout
+@kindex show retransmit-timeout
+You can control the timeout used while waiting for a packet, in the MIPS
+remote protocol, with the @code{set timeout @var{seconds}} command.  The
+default is 5 seconds.  Similarly, you can control the timeout used while
+waiting for an acknowledgement of a packet with the @code{set
+retransmit-timeout @var{seconds}} command.  The default is 3 seconds.
+You can inspect both values with @code{show timeout} and @code{show
+retransmit-timeout}.  (These commands are @emph{only} available when
+@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
+
+The timeout set by @code{set timeout} does not apply when @value{GDBN}
+is waiting for your program to stop.  In that case, @value{GDBN} waits
+forever because it has no way of knowing how long the program is going
+to run before stopping.
+@end table
+@end ifset
+
+@ifset SIMS
+@node Simulator
+@subsection Simulated CPU target
+
+@ifset GENERIC
+@cindex simulator
+@cindex simulator, Z8000
+@cindex Z8000 simulator
+@cindex simulator, H8/300 or H8/500
+@cindex H8/300 or H8/500 simulator
+@cindex simulator, Hitachi SH
+@cindex Hitachi SH simulator
+@cindex CPU simulator
+For some configurations, @value{GDBN} includes a CPU simulator that you
+can use instead of a hardware CPU to debug your programs.
+Currently, simulators are available for ARM, D10V, D30V, FR30, H8/300,
+H8/500, i960, M32R, MIPS, MN10200, MN10300, PowerPC, SH, Sparc, V850,
+W65, and Z8000.
+@end ifset
+
+@ifclear GENERIC
+@ifset H8
+@cindex simulator, H8/300 or H8/500
+@cindex Hitachi H8/300 or H8/500 simulator
+@cindex simulator, Hitachi SH
+@cindex Hitachi SH simulator
+When configured for debugging Hitachi microprocessor targets,
+@value{GDBN} includes a CPU simulator for the target chip (a Hitachi SH,
+H8/300, or H8/500).
+@end ifset
+
+@ifset Z8K
+@cindex simulator, Z8000
+@cindex Zilog Z8000 simulator
+When configured for debugging Zilog Z8000 targets, @value{GDBN} includes
+a Z8000 simulator.
+@end ifset
+@end ifclear
+
+@ifset Z8K
+For the Z8000 family, @samp{target sim} simulates either the Z8002 (the
+unsegmented variant of the Z8000 architecture) or the Z8001 (the
+segmented variant).  The simulator recognizes which architecture is
+appropriate by inspecting the object code.
+@end ifset
+
+@table @code
+@item target sim @var{args}
+@kindex sim
+@kindex target sim
+Debug programs on a simulated CPU.  If the simulator supports setup
+options, specify them via @var{args}.
+@end table
+
+@noindent
+After specifying this target, you can debug programs for the simulated
+CPU in the same style as programs for your host computer; use the
+@code{file} command to load a new program image, the @code{run} command
+to run your program, and so on.
+
+As well as making available all the usual machine registers (see
+@code{info reg}), the Z8000 simulator provides three additional items
+of information as specially named registers:
+
+@table @code
+@item cycles
+Counts clock-ticks in the simulator.
+
+@item insts
+Counts instructions run in the simulator.
+
+@item time
+Execution time in 60ths of a second. 
+@end table
+
+You can refer to these values in @value{GDBN} expressions with the usual
+conventions; for example, @w{@samp{b fputc if $cycles>5000}} sets a
+conditional breakpoint that suspends only after at least 5000
+simulated clock ticks.
+@end ifset
+
+@c need to add much more detail about sims!
diff --git a/gdb/doc/stabs.texinfo b/gdb/doc/stabs.texinfo
new file mode 100644
index 0000000..a4f0bc9
--- /dev/null
+++ b/gdb/doc/stabs.texinfo
@@ -0,0 +1,4019 @@
+\input texinfo
+@setfilename stabs.info
+
+@c @finalout
+
+@ifinfo
+@format
+START-INFO-DIR-ENTRY
+* Stabs: (stabs).                 The "stabs" debugging information format.
+END-INFO-DIR-ENTRY
+@end format
+@end ifinfo
+
+@ifinfo
+This document describes the stabs debugging symbol tables.
+
+Copyright 1992, 93, 94, 95, 97, 1998 Free Software Foundation, Inc.
+Contributed by Cygnus Support.  Written by Julia Menapace, Jim Kingdon,
+and David MacKenzie.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@ignore
+Permission is granted to process this file through Tex and print the
+results, provided the printed document carries copying permission
+notice identical to this one except for the removal of this paragraph
+(this paragraph not being relevant to the printed manual).
+
+@end ignore
+Permission is granted to copy or distribute modified versions of this
+manual under the terms of the GPL (for which purpose this text may be
+regarded as a program in the language TeX).
+@end ifinfo
+
+@setchapternewpage odd
+@settitle STABS
+@titlepage
+@title The ``stabs'' debug format
+@author Julia Menapace, Jim Kingdon, David MacKenzie
+@author Cygnus Support
+@page
+@tex
+\def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
+\xdef\manvers{\$Revision$}  % For use in headers, footers too
+{\parskip=0pt
+\hfill Cygnus Support\par
+\hfill \manvers\par
+\hfill \TeX{}info \texinfoversion\par
+}
+@end tex
+
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1992, 93, 94, 95, 97, 1998 Free Software Foundation, Inc.
+Contributed by Cygnus Support.
+
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+
+@end titlepage
+
+@ifinfo
+@node Top
+@top The "stabs" representation of debugging information
+
+This document describes the stabs debugging format.
+
+@menu
+* Overview::			Overview of stabs
+* Program Structure::		Encoding of the structure of the program
+* Constants::			Constants
+* Variables::
+* Types::			Type definitions
+* Symbol Tables::		Symbol information in symbol tables
+* Cplusplus::			Stabs specific to C++
+* Stab Types::			Symbol types in a.out files
+* Symbol Descriptors::		Table of symbol descriptors
+* Type Descriptors::		Table of type descriptors
+* Expanded Reference::		Reference information by stab type
+* Questions::			Questions and anomolies
+* Stab Sections::		In some object file formats, stabs are
+                                in sections.
+* Symbol Types Index::          Index of symbolic stab symbol type names.
+@end menu
+@end ifinfo
+
+
+@node Overview
+@chapter Overview of Stabs
+
+@dfn{Stabs} refers to a format for information that describes a program
+to a debugger.  This format was apparently invented by
+Peter Kessler at
+the University of California at Berkeley, for the @code{pdx} Pascal
+debugger; the format has spread widely since then.
+
+This document is one of the few published sources of documentation on
+stabs.  It is believed to be comprehensive for stabs used by C.  The
+lists of symbol descriptors (@pxref{Symbol Descriptors}) and type
+descriptors (@pxref{Type Descriptors}) are believed to be completely
+comprehensive.  Stabs for COBOL-specific features and for variant
+records (used by Pascal and Modula-2) are poorly documented here.
+
+@c FIXME: Need to document all OS9000 stuff in GDB; see all references
+@c to os9k_stabs in stabsread.c.
+
+Other sources of information on stabs are @cite{Dbx and Dbxtool
+Interfaces}, 2nd edition, by Sun, 1988, and @cite{AIX Version 3.2 Files
+Reference}, Fourth Edition, September 1992, "dbx Stabstring Grammar" in
+the a.out section, page 2-31.  This document is believed to incorporate
+the information from those two sources except where it explicitly directs
+you to them for more information.
+
+@menu
+* Flow::			Overview of debugging information flow
+* Stabs Format::		Overview of stab format
+* String Field::		The string field
+* C Example::			A simple example in C source
+* Assembly Code::		The simple example at the assembly level
+@end menu
+
+@node Flow
+@section Overview of Debugging Information Flow
+
+The GNU C compiler compiles C source in a @file{.c} file into assembly
+language in a @file{.s} file, which the assembler translates into
+a @file{.o} file, which the linker combines with other @file{.o} files and
+libraries to produce an executable file.
+
+With the @samp{-g} option, GCC puts in the @file{.s} file additional
+debugging information, which is slightly transformed by the assembler
+and linker, and carried through into the final executable.  This
+debugging information describes features of the source file like line
+numbers, the types and scopes of variables, and function names,
+parameters, and scopes.
+
+For some object file formats, the debugging information is encapsulated
+in assembler directives known collectively as @dfn{stab} (symbol table)
+directives, which are interspersed with the generated code.  Stabs are
+the native format for debugging information in the a.out and XCOFF
+object file formats.  The GNU tools can also emit stabs in the COFF and
+ECOFF object file formats.
+
+The assembler adds the information from stabs to the symbol information
+it places by default in the symbol table and the string table of the
+@file{.o} file it is building.  The linker consolidates the @file{.o}
+files into one executable file, with one symbol table and one string
+table.  Debuggers use the symbol and string tables in the executable as
+a source of debugging information about the program.
+
+@node Stabs Format
+@section Overview of Stab Format
+
+There are three overall formats for stab assembler directives,
+differentiated by the first word of the stab.  The name of the directive
+describes which combination of four possible data fields follows.  It is
+either @code{.stabs} (string), @code{.stabn} (number), or @code{.stabd}
+(dot).  IBM's XCOFF assembler uses @code{.stabx} (and some other
+directives such as @code{.file} and @code{.bi}) instead of
+@code{.stabs}, @code{.stabn} or @code{.stabd}.
+
+The overall format of each class of stab is:
+
+@example
+.stabs "@var{string}",@var{type},@var{other},@var{desc},@var{value}
+.stabn @var{type},@var{other},@var{desc},@var{value}
+.stabd @var{type},@var{other},@var{desc}
+.stabx "@var{string}",@var{value},@var{type},@var{sdb-type}
+@end example
+
+@c what is the correct term for "current file location"?  My AIX
+@c assembler manual calls it "the value of the current location counter".
+For @code{.stabn} and @code{.stabd}, there is no @var{string} (the
+@code{n_strx} field is zero; see @ref{Symbol Tables}).  For
+@code{.stabd}, the @var{value} field is implicit and has the value of
+the current file location.  For @code{.stabx}, the @var{sdb-type} field
+is unused for stabs and can always be set to zero.  The @var{other}
+field is almost always unused and can be set to zero.
+
+The number in the @var{type} field gives some basic information about
+which type of stab this is (or whether it @emph{is} a stab, as opposed
+to an ordinary symbol).  Each valid type number defines a different stab
+type; further, the stab type defines the exact interpretation of, and
+possible values for, any remaining @var{string}, @var{desc}, or
+@var{value} fields present in the stab.  @xref{Stab Types}, for a list
+in numeric order of the valid @var{type} field values for stab directives.
+
+@node String Field
+@section The String Field
+
+For most stabs the string field holds the meat of the
+debugging information.  The flexible nature of this field
+is what makes stabs extensible.  For some stab types the string field
+contains only a name.  For other stab types the contents can be a great
+deal more complex.
+
+The overall format of the string field for most stab types is:
+
+@example
+"@var{name}:@var{symbol-descriptor} @var{type-information}"
+@end example
+
+@var{name} is the name of the symbol represented by the stab; it can
+contain a pair of colons (@pxref{Nested Symbols}).  @var{name} can be
+omitted, which means the stab represents an unnamed object.  For
+example, @samp{:t10=*2} defines type 10 as a pointer to type 2, but does
+not give the type a name.  Omitting the @var{name} field is supported by
+AIX dbx and GDB after about version 4.8, but not other debuggers.  GCC
+sometimes uses a single space as the name instead of omitting the name
+altogether; apparently that is supported by most debuggers.
+
+The @var{symbol-descriptor} following the @samp{:} is an alphabetic
+character that tells more specifically what kind of symbol the stab
+represents. If the @var{symbol-descriptor} is omitted, but type
+information follows, then the stab represents a local variable.  For a
+list of symbol descriptors, see @ref{Symbol Descriptors}.  The @samp{c}
+symbol descriptor is an exception in that it is not followed by type
+information.  @xref{Constants}.
+
+@var{type-information} is either a @var{type-number}, or
+@samp{@var{type-number}=}.  A @var{type-number} alone is a type
+reference, referring directly to a type that has already been defined.
+
+The @samp{@var{type-number}=} form is a type definition, where the
+number represents a new type which is about to be defined.  The type
+definition may refer to other types by number, and those type numbers
+may be followed by @samp{=} and nested definitions.  Also, the Lucid
+compiler will repeat @samp{@var{type-number}=} more than once if it
+wants to define several type numbers at once.
+
+In a type definition, if the character that follows the equals sign is
+non-numeric then it is a @var{type-descriptor}, and tells what kind of
+type is about to be defined.  Any other values following the
+@var{type-descriptor} vary, depending on the @var{type-descriptor}.
+@xref{Type Descriptors}, for a list of @var{type-descriptor} values.  If
+a number follows the @samp{=} then the number is a @var{type-reference}.
+For a full description of types, @ref{Types}.
+
+A @var{type-number} is often a single number.  The GNU and Sun tools
+additionally permit a @var{type-number} to be a pair
+(@var{file-number},@var{filetype-number}) (the parentheses appear in the
+string, and serve to distinguish the two cases).  The @var{file-number}
+is a number starting with 1 which is incremented for each seperate
+source file in the compilation (e.g., in C, each header file gets a
+different number).  The @var{filetype-number} is a number starting with
+1 which is incremented for each new type defined in the file.
+(Separating the file number and the type number permits the
+@code{N_BINCL} optimization to succeed more often; see @ref{Include
+Files}).
+
+There is an AIX extension for type attributes.  Following the @samp{=}
+are any number of type attributes.  Each one starts with @samp{@@} and
+ends with @samp{;}.  Debuggers, including AIX's dbx and GDB 4.10, skip
+any type attributes they do not recognize.  GDB 4.9 and other versions
+of dbx may not do this.  Because of a conflict with C++
+(@pxref{Cplusplus}), new attributes should not be defined which begin
+with a digit, @samp{(}, or @samp{-}; GDB may be unable to distinguish
+those from the C++ type descriptor @samp{@@}.  The attributes are:
+
+@table @code
+@item a@var{boundary}
+@var{boundary} is an integer specifying the alignment.  I assume it
+applies to all variables of this type.
+
+@item p@var{integer}
+Pointer class (for checking).  Not sure what this means, or how
+@var{integer} is interpreted.
+
+@item P
+Indicate this is a packed type, meaning that structure fields or array
+elements are placed more closely in memory, to save memory at the
+expense of speed.
+
+@item s@var{size}
+Size in bits of a variable of this type.  This is fully supported by GDB
+4.11 and later.
+
+@item S
+Indicate that this type is a string instead of an array of characters,
+or a bitstring instead of a set.  It doesn't change the layout of the
+data being represented, but does enable the debugger to know which type
+it is.
+@end table
+
+All of this can make the string field quite long.  All versions of GDB,
+and some versions of dbx, can handle arbitrarily long strings.  But many
+versions of dbx (or assemblers or linkers, I'm not sure which)
+cretinously limit the strings to about 80 characters, so compilers which
+must work with such systems need to split the @code{.stabs} directive
+into several @code{.stabs} directives.  Each stab duplicates every field
+except the string field.  The string field of every stab except the last
+is marked as continued with a backslash at the end (in the assembly code
+this may be written as a double backslash, depending on the assembler).
+Removing the backslashes and concatenating the string fields of each
+stab produces the original, long string.  Just to be incompatible (or so
+they don't have to worry about what the assembler does with
+backslashes), AIX can use @samp{?} instead of backslash.
+
+@node C Example
+@section A Simple Example in C Source
+
+To get the flavor of how stabs describe source information for a C
+program, let's look at the simple program:
+
+@example
+main()
+@{
+        printf("Hello world");
+@}
+@end example
+
+When compiled with @samp{-g}, the program above yields the following
+@file{.s} file.  Line numbers have been added to make it easier to refer
+to parts of the @file{.s} file in the description of the stabs that
+follows.
+
+@node Assembly Code
+@section The Simple Example at the Assembly Level
+
+This simple ``hello world'' example demonstrates several of the stab
+types used to describe C language source files.
+
+@example
+1  gcc2_compiled.:
+2  .stabs "/cygint/s1/users/jcm/play/",100,0,0,Ltext0
+3  .stabs "hello.c",100,0,0,Ltext0
+4  .text
+5  Ltext0:
+6  .stabs "int:t1=r1;-2147483648;2147483647;",128,0,0,0
+7  .stabs "char:t2=r2;0;127;",128,0,0,0
+8  .stabs "long int:t3=r1;-2147483648;2147483647;",128,0,0,0
+9  .stabs "unsigned int:t4=r1;0;-1;",128,0,0,0
+10 .stabs "long unsigned int:t5=r1;0;-1;",128,0,0,0
+11 .stabs "short int:t6=r1;-32768;32767;",128,0,0,0
+12 .stabs "long long int:t7=r1;0;-1;",128,0,0,0
+13 .stabs "short unsigned int:t8=r1;0;65535;",128,0,0,0
+14 .stabs "long long unsigned int:t9=r1;0;-1;",128,0,0,0
+15 .stabs "signed char:t10=r1;-128;127;",128,0,0,0
+16 .stabs "unsigned char:t11=r1;0;255;",128,0,0,0
+17 .stabs "float:t12=r1;4;0;",128,0,0,0
+18 .stabs "double:t13=r1;8;0;",128,0,0,0
+19 .stabs "long double:t14=r1;8;0;",128,0,0,0
+20 .stabs "void:t15=15",128,0,0,0
+21      .align 4
+22 LC0:
+23      .ascii "Hello, world!\12\0"
+24      .align 4
+25      .global _main
+26      .proc 1
+27 _main:
+28 .stabn 68,0,4,LM1
+29 LM1:
+30      !#PROLOGUE# 0
+31      save %sp,-136,%sp
+32      !#PROLOGUE# 1
+33      call ___main,0
+34      nop
+35 .stabn 68,0,5,LM2
+36 LM2:
+37 LBB2:
+38      sethi %hi(LC0),%o1
+39      or %o1,%lo(LC0),%o0
+40      call _printf,0
+41      nop
+42 .stabn 68,0,6,LM3
+43 LM3:
+44 LBE2:
+45 .stabn 68,0,6,LM4
+46 LM4:
+47 L1:
+48      ret
+49      restore
+50 .stabs "main:F1",36,0,0,_main
+51 .stabn 192,0,0,LBB2
+52 .stabn 224,0,0,LBE2
+@end example
+
+@node Program Structure
+@chapter Encoding the Structure of the Program
+
+The elements of the program structure that stabs encode include the name
+of the main function, the names of the source and include files, the
+line numbers, procedure names and types, and the beginnings and ends of
+blocks of code.
+
+@menu
+* Main Program::		Indicate what the main program is
+* Source Files::		The path and name of the source file
+* Include Files::               Names of include files
+* Line Numbers::
+* Procedures::
+* Nested Procedures::
+* Block Structure::
+* Alternate Entry Points::      Entering procedures except at the beginning.
+@end menu
+
+@node Main Program
+@section Main Program
+
+@findex N_MAIN
+Most languages allow the main program to have any name.  The
+@code{N_MAIN} stab type tells the debugger the name that is used in this
+program.  Only the string field is significant; it is the name of
+a function which is the main program.  Most C compilers do not use this
+stab (they expect the debugger to assume that the name is @code{main}),
+but some C compilers emit an @code{N_MAIN} stab for the @code{main}
+function.  I'm not sure how XCOFF handles this.
+
+@node Source Files
+@section Paths and Names of the Source Files
+
+@findex N_SO
+Before any other stabs occur, there must be a stab specifying the source
+file.  This information is contained in a symbol of stab type
+@code{N_SO}; the string field contains the name of the file.  The
+value of the symbol is the start address of the portion of the
+text section corresponding to that file.
+
+With the Sun Solaris2 compiler, the desc field contains a
+source-language code.
+@c Do the debuggers use it?  What are the codes? -djm
+
+Some compilers (for example, GCC2 and SunOS4 @file{/bin/cc}) also
+include the directory in which the source was compiled, in a second
+@code{N_SO} symbol preceding the one containing the file name.  This
+symbol can be distinguished by the fact that it ends in a slash.  Code
+from the @code{cfront} C++ compiler can have additional @code{N_SO} symbols for
+nonexistent source files after the @code{N_SO} for the real source file;
+these are believed to contain no useful information.
+
+For example:
+
+@example
+.stabs "/cygint/s1/users/jcm/play/",100,0,0,Ltext0     # @r{100 is N_SO}
+.stabs "hello.c",100,0,0,Ltext0
+        .text
+Ltext0:
+@end example
+
+@findex C_FILE
+Instead of @code{N_SO} symbols, XCOFF uses a @code{.file} assembler
+directive which assembles to a @code{C_FILE} symbol; explaining this in
+detail is outside the scope of this document.
+
+@c FIXME: Exactly when should the empty N_SO be used?  Why?
+If it is useful to indicate the end of a source file, this is done with
+an @code{N_SO} symbol with an empty string for the name.  The value is
+the address of the end of the text section for the file.  For some
+systems, there is no indication of the end of a source file, and you
+just need to figure it ended when you see an @code{N_SO} for a different
+source file, or a symbol ending in @code{.o} (which at least some
+linkers insert to mark the start of a new @code{.o} file).
+
+@node Include Files
+@section Names of Include Files
+
+There are several schemes for dealing with include files: the
+traditional @code{N_SOL} approach, Sun's @code{N_BINCL} approach, and the
+XCOFF @code{C_BINCL} approach (which despite the similar name has little in
+common with @code{N_BINCL}).
+
+@findex N_SOL
+An @code{N_SOL} symbol specifies which include file subsequent symbols
+refer to.  The string field is the name of the file and the value is the
+text address corresponding to the end of the previous include file and
+the start of this one.  To specify the main source file again, use an
+@code{N_SOL} symbol with the name of the main source file.
+
+@findex N_BINCL
+@findex N_EINCL
+@findex N_EXCL
+The @code{N_BINCL} approach works as follows.  An @code{N_BINCL} symbol
+specifies the start of an include file.  In an object file, only the
+string is significant; the linker puts data into some of the other
+fields.  The end of the include file is marked by an @code{N_EINCL}
+symbol (which has no string field).  In an object file, there is no
+significant data in the @code{N_EINCL} symbol.  @code{N_BINCL} and
+@code{N_EINCL} can be nested.
+
+If the linker detects that two source files have identical stabs between
+an @code{N_BINCL} and @code{N_EINCL} pair (as will generally be the case
+for a header file), then it only puts out the stabs once.  Each
+additional occurance is replaced by an @code{N_EXCL} symbol.  I believe
+the GNU linker and the Sun (both SunOS4 and Solaris) linker are the only
+ones which supports this feature.
+
+A linker which supports this feature will set the value of a
+@code{N_BINCL} symbol to the total of all the characters in the stabs
+strings included in the header file, omitting any file numbers.  The
+value of an @code{N_EXCL} symbol is the same as the value of the
+@code{N_BINCL} symbol it replaces.  This information can be used to
+match up @code{N_EXCL} and @code{N_BINCL} symbols which have the same
+filename.  The @code{N_EINCL} value, and the values of the other and
+description fields for all three, appear to always be zero.
+
+@findex C_BINCL
+@findex C_EINCL
+For the start of an include file in XCOFF, use the @file{.bi} assembler
+directive, which generates a @code{C_BINCL} symbol.  A @file{.ei}
+directive, which generates a @code{C_EINCL} symbol, denotes the end of
+the include file.  Both directives are followed by the name of the
+source file in quotes, which becomes the string for the symbol.
+The value of each symbol, produced automatically by the assembler
+and linker, is the offset into the executable of the beginning
+(inclusive, as you'd expect) or end (inclusive, as you would not expect)
+of the portion of the COFF line table that corresponds to this include
+file.  @code{C_BINCL} and @code{C_EINCL} do not nest.
+
+@node Line Numbers
+@section Line Numbers
+
+@findex N_SLINE
+An @code{N_SLINE} symbol represents the start of a source line.  The
+desc field contains the line number and the value contains the code
+address for the start of that source line.  On most machines the address
+is absolute; for stabs in sections (@pxref{Stab Sections}), it is
+relative to the function in which the @code{N_SLINE} symbol occurs.
+
+@findex N_DSLINE
+@findex N_BSLINE
+GNU documents @code{N_DSLINE} and @code{N_BSLINE} symbols for line
+numbers in the data or bss segments, respectively.  They are identical
+to @code{N_SLINE} but are relocated differently by the linker.  They
+were intended to be used to describe the source location of a variable
+declaration, but I believe that GCC2 actually puts the line number in
+the desc field of the stab for the variable itself.  GDB has been
+ignoring these symbols (unless they contain a string field) since
+at least GDB 3.5.
+
+For single source lines that generate discontiguous code, such as flow
+of control statements, there may be more than one line number entry for
+the same source line.  In this case there is a line number entry at the
+start of each code range, each with the same line number.
+
+XCOFF does not use stabs for line numbers.  Instead, it uses COFF line
+numbers (which are outside the scope of this document).  Standard COFF
+line numbers cannot deal with include files, but in XCOFF this is fixed
+with the @code{C_BINCL} method of marking include files (@pxref{Include
+Files}).
+
+@node Procedures
+@section Procedures
+
+@findex N_FUN, for functions
+@findex N_FNAME
+@findex N_STSYM, for functions (Sun acc)
+@findex N_GSYM, for functions (Sun acc)
+All of the following stabs normally use the @code{N_FUN} symbol type.
+However, Sun's @code{acc} compiler on SunOS4 uses @code{N_GSYM} and
+@code{N_STSYM}, which means that the value of the stab for the function
+is useless and the debugger must get the address of the function from
+the non-stab symbols instead.  On systems where non-stab symbols have
+leading underscores, the stabs will lack underscores and the debugger
+needs to know about the leading underscore to match up the stab and the
+non-stab symbol.  BSD Fortran is said to use @code{N_FNAME} with the
+same restriction; the value of the symbol is not useful (I'm not sure it
+really does use this, because GDB doesn't handle this and no one has
+complained).
+
+@findex C_FUN
+A function is represented by an @samp{F} symbol descriptor for a global
+(extern) function, and @samp{f} for a static (local) function.  For
+a.out, the value of the symbol is the address of the start of the
+function; it is already relocated.  For stabs in ELF, the SunPRO
+compiler version 2.0.1 and GCC put out an address which gets relocated
+by the linker.  In a future release SunPRO is planning to put out zero,
+in which case the address can be found from the ELF (non-stab) symbol.
+Because looking things up in the ELF symbols would probably be slow, I'm
+not sure how to find which symbol of that name is the right one, and
+this doesn't provide any way to deal with nested functions, it would
+probably be better to make the value of the stab an address relative to
+the start of the file, or just absolute.  See @ref{ELF Linker
+Relocation} for more information on linker relocation of stabs in ELF
+files.  For XCOFF, the stab uses the @code{C_FUN} storage class and the
+value of the stab is meaningless; the address of the function can be
+found from the csect symbol (XTY_LD/XMC_PR).
+
+The type information of the stab represents the return type of the
+function; thus @samp{foo:f5} means that foo is a function returning type
+5.  There is no need to try to get the line number of the start of the
+function from the stab for the function; it is in the next
+@code{N_SLINE} symbol.
+
+@c FIXME: verify whether the "I suspect" below is true or not.
+Some compilers (such as Sun's Solaris compiler) support an extension for
+specifying the types of the arguments.  I suspect this extension is not
+used for old (non-prototyped) function definitions in C.  If the
+extension is in use, the type information of the stab for the function
+is followed by type information for each argument, with each argument
+preceded by @samp{;}.  An argument type of 0 means that additional
+arguments are being passed, whose types and number may vary (@samp{...}
+in ANSI C).  GDB has tolerated this extension (parsed the syntax, if not
+necessarily used the information) since at least version 4.8; I don't
+know whether all versions of dbx tolerate it.  The argument types given
+here are not redundant with the symbols for the formal parameters
+(@pxref{Parameters}); they are the types of the arguments as they are
+passed, before any conversions might take place.  For example, if a C
+function which is declared without a prototype takes a @code{float}
+argument, the value is passed as a @code{double} but then converted to a
+@code{float}.  Debuggers need to use the types given in the arguments
+when printing values, but when calling the function they need to use the
+types given in the symbol defining the function.
+
+If the return type and types of arguments of a function which is defined
+in another source file are specified (i.e., a function prototype in ANSI
+C), traditionally compilers emit no stab; the only way for the debugger
+to find the information is if the source file where the function is
+defined was also compiled with debugging symbols.  As an extension the
+Solaris compiler uses symbol descriptor @samp{P} followed by the return
+type of the function, followed by the arguments, each preceded by
+@samp{;}, as in a stab with symbol descriptor @samp{f} or @samp{F}.
+This use of symbol descriptor @samp{P} can be distinguished from its use
+for register parameters (@pxref{Register Parameters}) by the fact that it has
+symbol type @code{N_FUN}.
+
+The AIX documentation also defines symbol descriptor @samp{J} as an
+internal function.  I assume this means a function nested within another
+function.  It also says symbol descriptor @samp{m} is a module in
+Modula-2 or extended Pascal.
+
+Procedures (functions which do not return values) are represented as
+functions returning the @code{void} type in C.  I don't see why this couldn't
+be used for all languages (inventing a @code{void} type for this purpose if
+necessary), but the AIX documentation defines @samp{I}, @samp{P}, and
+@samp{Q} for internal, global, and static procedures, respectively.
+These symbol descriptors are unusual in that they are not followed by
+type information.
+
+The following example shows a stab for a function @code{main} which
+returns type number @code{1}.  The @code{_main} specified for the value
+is a reference to an assembler label which is used to fill in the start
+address of the function.
+
+@example
+.stabs "main:F1",36,0,0,_main      # @r{36 is N_FUN}
+@end example
+
+The stab representing a procedure is located immediately following the
+code of the procedure.  This stab is in turn directly followed by a
+group of other stabs describing elements of the procedure.  These other
+stabs describe the procedure's parameters, its block local variables, and
+its block structure.
+
+If functions can appear in different sections, then the debugger may not
+be able to find the end of a function.  Recent versions of GCC will mark
+the end of a function with an @code{N_FUN} symbol with an empty string
+for the name.  The value is the address of the end of the current
+function.  Without such a symbol, there is no indication of the address
+of the end of a function, and you must assume that it ended at the
+starting address of the next function or at the end of the text section
+for the program.
+
+@node Nested Procedures
+@section Nested Procedures
+
+For any of the symbol descriptors representing procedures, after the
+symbol descriptor and the type information is optionally a scope
+specifier.  This consists of a comma, the name of the procedure, another
+comma, and the name of the enclosing procedure.  The first name is local
+to the scope specified, and seems to be redundant with the name of the
+symbol (before the @samp{:}).  This feature is used by GCC, and
+presumably Pascal, Modula-2, etc., compilers, for nested functions.
+
+If procedures are nested more than one level deep, only the immediately
+containing scope is specified.  For example, this code:
+
+@example
+int
+foo (int x)
+@{
+  int bar (int y)
+    @{
+      int baz (int z)
+        @{
+          return x + y + z;
+        @}
+      return baz (x + 2 * y);
+    @}
+  return x + bar (3 * x);
+@}
+@end example
+
+@noindent
+produces the stabs:
+
+@example
+.stabs "baz:f1,baz,bar",36,0,0,_baz.15         # @r{36 is N_FUN}
+.stabs "bar:f1,bar,foo",36,0,0,_bar.12
+.stabs "foo:F1",36,0,0,_foo
+@end example
+
+@node Block Structure
+@section Block Structure
+
+@findex N_LBRAC
+@findex N_RBRAC
+@c For GCC 2.5.8 or so stabs-in-coff, these are absolute instead of
+@c function relative (as documented below).  But GDB has never been able
+@c to deal with that (it had wanted them to be relative to the file, but
+@c I just fixed that (between GDB 4.12 and 4.13)), so it is function
+@c relative just like ELF and SOM and the below documentation.
+The program's block structure is represented by the @code{N_LBRAC} (left
+brace) and the @code{N_RBRAC} (right brace) stab types.  The variables
+defined inside a block precede the @code{N_LBRAC} symbol for most
+compilers, including GCC.  Other compilers, such as the Convex, Acorn
+RISC machine, and Sun @code{acc} compilers, put the variables after the
+@code{N_LBRAC} symbol.  The values of the @code{N_LBRAC} and
+@code{N_RBRAC} symbols are the start and end addresses of the code of
+the block, respectively.  For most machines, they are relative to the
+starting address of this source file.  For the Gould NP1, they are
+absolute.  For stabs in sections (@pxref{Stab Sections}), they are
+relative to the function in which they occur.
+
+The @code{N_LBRAC} and @code{N_RBRAC} stabs that describe the block
+scope of a procedure are located after the @code{N_FUN} stab that
+represents the procedure itself.
+
+Sun documents the desc field of @code{N_LBRAC} and
+@code{N_RBRAC} symbols as containing the nesting level of the block.
+However, dbx seems to not care, and GCC always sets desc to
+zero.
+
+@findex .bb
+@findex .be
+@findex C_BLOCK
+For XCOFF, block scope is indicated with @code{C_BLOCK} symbols.  If the
+name of the symbol is @samp{.bb}, then it is the beginning of the block;
+if the name of the symbol is @samp{.be}; it is the end of the block.
+
+@node Alternate Entry Points
+@section Alternate Entry Points
+
+@findex N_ENTRY
+@findex C_ENTRY
+Some languages, like Fortran, have the ability to enter procedures at
+some place other than the beginning.  One can declare an alternate entry
+point.  The @code{N_ENTRY} stab is for this; however, the Sun FORTRAN
+compiler doesn't use it.  According to AIX documentation, only the name
+of a @code{C_ENTRY} stab is significant; the address of the alternate
+entry point comes from the corresponding external symbol.  A previous
+revision of this document said that the value of an @code{N_ENTRY} stab
+was the address of the alternate entry point, but I don't know the
+source for that information.
+
+@node Constants
+@chapter Constants
+
+The @samp{c} symbol descriptor indicates that this stab represents a
+constant.  This symbol descriptor is an exception to the general rule
+that symbol descriptors are followed by type information.  Instead, it
+is followed by @samp{=} and one of the following:
+
+@table @code
+@item b @var{value}
+Boolean constant.  @var{value} is a numeric value; I assume it is 0 for
+false or 1 for true.
+
+@item c @var{value}
+Character constant.  @var{value} is the numeric value of the constant.
+
+@item e @var{type-information} , @var{value}
+Constant whose value can be represented as integral.
+@var{type-information} is the type of the constant, as it would appear
+after a symbol descriptor (@pxref{String Field}).  @var{value} is the
+numeric value of the constant.  GDB 4.9 does not actually get the right
+value if @var{value} does not fit in a host @code{int}, but it does not
+do anything violent, and future debuggers could be extended to accept
+integers of any size (whether unsigned or not).  This constant type is
+usually documented as being only for enumeration constants, but GDB has
+never imposed that restriction; I don't know about other debuggers.
+
+@item i @var{value}
+Integer constant.  @var{value} is the numeric value.  The type is some
+sort of generic integer type (for GDB, a host @code{int}); to specify
+the type explicitly, use @samp{e} instead.
+
+@item r @var{value}
+Real constant.  @var{value} is the real value, which can be @samp{INF}
+(optionally preceded by a sign) for infinity, @samp{QNAN} for a quiet
+NaN (not-a-number), or @samp{SNAN} for a signalling NaN.  If it is a
+normal number the format is that accepted by the C library function
+@code{atof}.
+
+@item s @var{string}
+String constant.  @var{string} is a string enclosed in either @samp{'}
+(in which case @samp{'} characters within the string are represented as
+@samp{\'} or @samp{"} (in which case @samp{"} characters within the
+string are represented as @samp{\"}).
+
+@item S @var{type-information} , @var{elements} , @var{bits} , @var{pattern}
+Set constant.  @var{type-information} is the type of the constant, as it
+would appear after a symbol descriptor (@pxref{String Field}).
+@var{elements} is the number of elements in the set (does this means
+how many bits of @var{pattern} are actually used, which would be
+redundant with the type, or perhaps the number of bits set in
+@var{pattern}?  I don't get it), @var{bits} is the number of bits in the
+constant (meaning it specifies the length of @var{pattern}, I think),
+and @var{pattern} is a hexadecimal representation of the set.  AIX
+documentation refers to a limit of 32 bytes, but I see no reason why
+this limit should exist.  This form could probably be used for arbitrary
+constants, not just sets; the only catch is that @var{pattern} should be
+understood to be target, not host, byte order and format.
+@end table
+
+The boolean, character, string, and set constants are not supported by
+GDB 4.9, but it ignores them.  GDB 4.8 and earlier gave an error
+message and refused to read symbols from the file containing the
+constants.
+
+The above information is followed by @samp{;}.
+
+@node Variables
+@chapter Variables
+
+Different types of stabs describe the various ways that variables can be
+allocated: on the stack, globally, in registers, in common blocks,
+statically, or as arguments to a function.
+
+@menu
+* Stack Variables::		Variables allocated on the stack.
+* Global Variables::		Variables used by more than one source file.
+* Register Variables::		Variables in registers.
+* Common Blocks::		Variables statically allocated together.
+* Statics::			Variables local to one source file.
+* Based Variables::		Fortran pointer based variables.
+* Parameters::			Variables for arguments to functions.
+@end menu
+
+@node Stack Variables
+@section Automatic Variables Allocated on the Stack
+
+If a variable's scope is local to a function and its lifetime is only as
+long as that function executes (C calls such variables
+@dfn{automatic}), it can be allocated in a register (@pxref{Register
+Variables}) or on the stack.
+
+@findex N_LSYM, for stack variables
+@findex C_LSYM
+Each variable allocated on the stack has a stab with the symbol
+descriptor omitted.  Since type information should begin with a digit,
+@samp{-}, or @samp{(}, only those characters precluded from being used
+for symbol descriptors.  However, the Acorn RISC machine (ARM) is said
+to get this wrong: it puts out a mere type definition here, without the
+preceding @samp{@var{type-number}=}.  This is a bad idea; there is no
+guarantee that type descriptors are distinct from symbol descriptors.
+Stabs for stack variables use the @code{N_LSYM} stab type, or
+@code{C_LSYM} for XCOFF.
+
+The value of the stab is the offset of the variable within the
+local variables.  On most machines this is an offset from the frame
+pointer and is negative.  The location of the stab specifies which block
+it is defined in; see @ref{Block Structure}.
+
+For example, the following C code:
+
+@example
+int
+main ()
+@{
+  int x;
+@}
+@end example
+
+produces the following stabs:
+
+@example
+.stabs "main:F1",36,0,0,_main   # @r{36 is N_FUN}
+.stabs "x:1",128,0,0,-12        # @r{128 is N_LSYM}
+.stabn 192,0,0,LBB2             # @r{192 is N_LBRAC}
+.stabn 224,0,0,LBE2             # @r{224 is N_RBRAC}
+@end example
+
+@xref{Procedures} for more information on the @code{N_FUN} stab, and
+@ref{Block Structure} for more information on the @code{N_LBRAC} and
+@code{N_RBRAC} stabs.
+
+@node Global Variables
+@section Global Variables
+
+@findex N_GSYM
+@findex C_GSYM
+@c FIXME: verify for sure that it really is C_GSYM on XCOFF
+A variable whose scope is not specific to just one source file is
+represented by the @samp{G} symbol descriptor.  These stabs use the
+@code{N_GSYM} stab type (C_GSYM for XCOFF).  The type information for
+the stab (@pxref{String Field}) gives the type of the variable.
+
+For example, the following source code:
+
+@example
+char g_foo = 'c';
+@end example
+
+@noindent
+yields the following assembly code:
+
+@example
+.stabs "g_foo:G2",32,0,0,0     # @r{32 is N_GSYM}
+     .global _g_foo
+     .data
+_g_foo:
+     .byte 99
+@end example
+
+The address of the variable represented by the @code{N_GSYM} is not
+contained in the @code{N_GSYM} stab.  The debugger gets this information
+from the external symbol for the global variable.  In the example above,
+the @code{.global _g_foo} and @code{_g_foo:} lines tell the assembler to
+produce an external symbol.
+
+Some compilers, like GCC, output @code{N_GSYM} stabs only once, where
+the variable is defined.  Other compilers, like SunOS4 /bin/cc, output a
+@code{N_GSYM} stab for each compilation unit which references the
+variable.
+
+@node Register Variables
+@section Register Variables
+
+@findex N_RSYM
+@findex C_RSYM
+@c According to an old version of this manual, AIX uses C_RPSYM instead
+@c of C_RSYM.  I am skeptical; this should be verified.
+Register variables have their own stab type, @code{N_RSYM}
+(@code{C_RSYM} for XCOFF), and their own symbol descriptor, @samp{r}.
+The stab's value is the number of the register where the variable data
+will be stored.
+@c .stabs "name:type",N_RSYM,0,RegSize,RegNumber (Sun doc)
+
+AIX defines a separate symbol descriptor @samp{d} for floating point
+registers.  This seems unnecessary; why not just just give floating
+point registers different register numbers?  I have not verified whether
+the compiler actually uses @samp{d}.
+
+If the register is explicitly allocated to a global variable, but not
+initialized, as in:
+
+@example
+register int g_bar asm ("%g5");
+@end example
+
+@noindent
+then the stab may be emitted at the end of the object file, with
+the other bss symbols.
+
+@node Common Blocks
+@section Common Blocks
+
+A common block is a statically allocated section of memory which can be
+referred to by several source files.  It may contain several variables.
+I believe Fortran is the only language with this feature.
+
+@findex N_BCOMM
+@findex N_ECOMM
+@findex C_BCOMM
+@findex C_ECOMM
+A @code{N_BCOMM} stab begins a common block and an @code{N_ECOMM} stab
+ends it.  The only field that is significant in these two stabs is the
+string, which names a normal (non-debugging) symbol that gives the
+address of the common block.  According to IBM documentation, only the
+@code{N_BCOMM} has the name of the common block (even though their
+compiler actually puts it both places).
+
+@findex N_ECOML
+@findex C_ECOML
+The stabs for the members of the common block are between the
+@code{N_BCOMM} and the @code{N_ECOMM}; the value of each stab is the
+offset within the common block of that variable.  IBM uses the
+@code{C_ECOML} stab type, and there is a corresponding @code{N_ECOML}
+stab type, but Sun's Fortran compiler uses @code{N_GSYM} instead.  The
+variables within a common block use the @samp{V} symbol descriptor (I
+believe this is true of all Fortran variables).  Other stabs (at least
+type declarations using @code{C_DECL}) can also be between the
+@code{N_BCOMM} and the @code{N_ECOMM}.
+
+@node Statics
+@section Static Variables
+
+Initialized static variables are represented by the @samp{S} and
+@samp{V} symbol descriptors.  @samp{S} means file scope static, and
+@samp{V} means procedure scope static.  One exception: in XCOFF, IBM's
+xlc compiler always uses @samp{V}, and whether it is file scope or not
+is distinguished by whether the stab is located within a function.
+
+@c This is probably not worth mentioning; it is only true on the sparc
+@c for `double' variables which although declared const are actually in
+@c the data segment (the text segment can't guarantee 8 byte alignment).
+@c (although GCC
+@c 2.4.5 has a bug in that it uses @code{N_FUN}, so neither dbx nor GDB can
+@c find the variables)
+@findex N_STSYM
+@findex N_LCSYM
+@findex N_FUN, for variables
+@findex N_ROSYM
+In a.out files, @code{N_STSYM} means the data section, @code{N_FUN}
+means the text section, and @code{N_LCSYM} means the bss section.  For
+those systems with a read-only data section separate from the text
+section (Solaris), @code{N_ROSYM} means the read-only data section.
+
+For example, the source lines:
+
+@example
+static const int var_const = 5;
+static int var_init = 2;
+static int var_noinit;
+@end example
+
+@noindent
+yield the following stabs:
+
+@example
+.stabs "var_const:S1",36,0,0,_var_const      # @r{36 is N_FUN}
+@dots{}
+.stabs "var_init:S1",38,0,0,_var_init        # @r{38 is N_STSYM}
+@dots{}
+.stabs "var_noinit:S1",40,0,0,_var_noinit    # @r{40 is N_LCSYM}
+@end example
+
+@findex C_STSYM
+@findex C_BSTAT
+@findex C_ESTAT
+In XCOFF files, the stab type need not indicate the section;
+@code{C_STSYM} can be used for all statics.  Also, each static variable
+is enclosed in a static block.  A @code{C_BSTAT} (emitted with a
+@samp{.bs} assembler directive) symbol begins the static block; its
+value is the symbol number of the csect symbol whose value is the
+address of the static block, its section is the section of the variables
+in that static block, and its name is @samp{.bs}.  A @code{C_ESTAT}
+(emitted with a @samp{.es} assembler directive) symbol ends the static
+block; its name is @samp{.es} and its value and section are ignored.
+
+In ECOFF files, the storage class is used to specify the section, so the
+stab type need not indicate the section.
+
+In ELF files, for the SunPRO compiler version 2.0.1, symbol descriptor
+@samp{S} means that the address is absolute (the linker relocates it)
+and symbol descriptor @samp{V} means that the address is relative to the
+start of the relevant section for that compilation unit.  SunPRO has
+plans to have the linker stop relocating stabs; I suspect that their the
+debugger gets the address from the corresponding ELF (not stab) symbol.
+I'm not sure how to find which symbol of that name is the right one.
+The clean way to do all this would be to have a the value of a symbol
+descriptor @samp{S} symbol be an offset relative to the start of the
+file, just like everything else, but that introduces obvious
+compatibility problems.  For more information on linker stab relocation,
+@xref{ELF Linker Relocation}.
+
+@node Based Variables
+@section Fortran Based Variables
+
+Fortran (at least, the Sun and SGI dialects of FORTRAN-77) has a feature
+which allows allocating arrays with @code{malloc}, but which avoids
+blurring the line between arrays and pointers the way that C does.  In
+stabs such a variable uses the @samp{b} symbol descriptor.
+
+For example, the Fortran declarations
+
+@example
+real foo, foo10(10), foo10_5(10,5)
+pointer (foop, foo)
+pointer (foo10p, foo10)
+pointer (foo105p, foo10_5)
+@end example
+
+produce the stabs
+
+@example
+foo:b6
+foo10:bar3;1;10;6
+foo10_5:bar3;1;5;ar3;1;10;6
+@end example
+
+In this example, @code{real} is type 6 and type 3 is an integral type
+which is the type of the subscripts of the array (probably
+@code{integer}).
+
+The @samp{b} symbol descriptor is like @samp{V} in that it denotes a
+statically allocated symbol whose scope is local to a function; see
+@xref{Statics}.  The value of the symbol, instead of being the address
+of the variable itself, is the address of a pointer to that variable.
+So in the above example, the value of the @code{foo} stab is the address
+of a pointer to a real, the value of the @code{foo10} stab is the
+address of a pointer to a 10-element array of reals, and the value of
+the @code{foo10_5} stab is the address of a pointer to a 5-element array
+of 10-element arrays of reals.
+
+@node Parameters
+@section Parameters
+
+Formal parameters to a function are represented by a stab (or sometimes
+two; see below) for each parameter.  The stabs are in the order in which
+the debugger should print the parameters (i.e., the order in which the
+parameters are declared in the source file).  The exact form of the stab
+depends on how the parameter is being passed.
+
+@findex N_PSYM
+@findex C_PSYM
+Parameters passed on the stack use the symbol descriptor @samp{p} and
+the @code{N_PSYM} symbol type (or @code{C_PSYM} for XCOFF).  The value
+of the symbol is an offset used to locate the parameter on the stack;
+its exact meaning is machine-dependent, but on most machines it is an
+offset from the frame pointer.
+
+As a simple example, the code:
+
+@example
+main (argc, argv)
+     int argc;
+     char **argv;
+@end example
+
+produces the stabs:
+
+@example
+.stabs "main:F1",36,0,0,_main                 # @r{36 is N_FUN}
+.stabs "argc:p1",160,0,0,68                   # @r{160 is N_PSYM}
+.stabs "argv:p20=*21=*2",160,0,0,72
+@end example
+
+The type definition of @code{argv} is interesting because it contains
+several type definitions.  Type 21 is pointer to type 2 (char) and
+@code{argv} (type 20) is pointer to type 21.
+
+@c FIXME: figure out what these mean and describe them coherently.
+The following symbol descriptors are also said to go with @code{N_PSYM}.
+The value of the symbol is said to be an offset from the argument
+pointer (I'm not sure whether this is true or not).
+
+@example
+pP (<<??>>)
+pF Fortran function parameter
+X  (function result variable)
+@end example
+
+@menu
+* Register Parameters::
+* Local Variable Parameters::
+* Reference Parameters::
+* Conformant Arrays::
+@end menu
+
+@node Register Parameters
+@subsection Passing Parameters in Registers
+
+If the parameter is passed in a register, then traditionally there are
+two symbols for each argument:
+
+@example
+.stabs "arg:p1" . . .       ; N_PSYM
+.stabs "arg:r1" . . .       ; N_RSYM
+@end example
+
+Debuggers use the second one to find the value, and the first one to
+know that it is an argument.
+
+@findex C_RPSYM
+@findex N_RSYM, for parameters
+Because that approach is kind of ugly, some compilers use symbol
+descriptor @samp{P} or @samp{R} to indicate an argument which is in a
+register.  Symbol type @code{C_RPSYM} is used in XCOFF and @code{N_RSYM}
+is used otherwise.  The symbol's value is the register number.  @samp{P}
+and @samp{R} mean the same thing; the difference is that @samp{P} is a
+GNU invention and @samp{R} is an IBM (XCOFF) invention.  As of version
+4.9, GDB should handle either one.
+
+There is at least one case where GCC uses a @samp{p} and @samp{r} pair
+rather than @samp{P}; this is where the argument is passed in the
+argument list and then loaded into a register.
+
+According to the AIX documentation, symbol descriptor @samp{D} is for a
+parameter passed in a floating point register.  This seems
+unnecessary---why not just use @samp{R} with a register number which
+indicates that it's a floating point register?  I haven't verified
+whether the system actually does what the documentation indicates.
+
+@c FIXME: On the hppa this is for any type > 8 bytes, I think, and not
+@c for small structures (investigate).
+On the sparc and hppa, for a @samp{P} symbol whose type is a structure
+or union, the register contains the address of the structure.  On the
+sparc, this is also true of a @samp{p} and @samp{r} pair (using Sun
+@code{cc}) or a @samp{p} symbol.  However, if a (small) structure is
+really in a register, @samp{r} is used.  And, to top it all off, on the
+hppa it might be a structure which was passed on the stack and loaded
+into a register and for which there is a @samp{p} and @samp{r} pair!  I
+believe that symbol descriptor @samp{i} is supposed to deal with this
+case (it is said to mean "value parameter by reference, indirect
+access"; I don't know the source for this information), but I don't know
+details or what compilers or debuggers use it, if any (not GDB or GCC).
+It is not clear to me whether this case needs to be dealt with
+differently than parameters passed by reference (@pxref{Reference Parameters}).
+
+@node Local Variable Parameters
+@subsection Storing Parameters as Local Variables
+
+There is a case similar to an argument in a register, which is an
+argument that is actually stored as a local variable.  Sometimes this
+happens when the argument was passed in a register and then the compiler
+stores it as a local variable.  If possible, the compiler should claim
+that it's in a register, but this isn't always done.
+
+If a parameter is passed as one type and converted to a smaller type by
+the prologue (for example, the parameter is declared as a @code{float},
+but the calling conventions specify that it is passed as a
+@code{double}), then GCC2 (sometimes) uses a pair of symbols.  The first
+symbol uses symbol descriptor @samp{p} and the type which is passed.
+The second symbol has the type and location which the parameter actually
+has after the prologue.  For example, suppose the following C code
+appears with no prototypes involved:
+
+@example
+void
+subr (f)
+     float f;
+@{
+@end example
+
+if @code{f} is passed as a double at stack offset 8, and the prologue
+converts it to a float in register number 0, then the stabs look like:
+
+@example
+.stabs "f:p13",160,0,3,8   # @r{160 is @code{N_PSYM}, here 13 is @code{double}}
+.stabs "f:r12",64,0,3,0    # @r{64 is @code{N_RSYM}, here 12 is @code{float}}
+@end example
+
+In both stabs 3 is the line number where @code{f} is declared
+(@pxref{Line Numbers}).
+
+@findex N_LSYM, for parameter
+GCC, at least on the 960, has another solution to the same problem.  It
+uses a single @samp{p} symbol descriptor for an argument which is stored
+as a local variable but uses @code{N_LSYM} instead of @code{N_PSYM}.  In
+this case, the value of the symbol is an offset relative to the local
+variables for that function, not relative to the arguments; on some
+machines those are the same thing, but not on all.
+
+@c This is mostly just background info; the part that logically belongs
+@c here is the last sentence.  
+On the VAX or on other machines in which the calling convention includes
+the number of words of arguments actually passed, the debugger (GDB at
+least) uses the parameter symbols to keep track of whether it needs to
+print nameless arguments in addition to the formal parameters which it
+has printed because each one has a stab.  For example, in 
+
+@example
+extern int fprintf (FILE *stream, char *format, @dots{});
+@dots{}
+fprintf (stdout, "%d\n", x);
+@end example
+
+there are stabs for @code{stream} and @code{format}.  On most machines,
+the debugger can only print those two arguments (because it has no way
+of knowing that additional arguments were passed), but on the VAX or
+other machines with a calling convention which indicates the number of
+words of arguments, the debugger can print all three arguments.  To do
+so, the parameter symbol (symbol descriptor @samp{p}) (not necessarily
+@samp{r} or symbol descriptor omitted symbols) needs to contain the
+actual type as passed (for example, @code{double} not @code{float} if it
+is passed as a double and converted to a float).
+
+@node Reference Parameters
+@subsection Passing Parameters by Reference
+
+If the parameter is passed by reference (e.g., Pascal @code{VAR}
+parameters), then the symbol descriptor is @samp{v} if it is in the
+argument list, or @samp{a} if it in a register.  Other than the fact
+that these contain the address of the parameter rather than the
+parameter itself, they are identical to @samp{p} and @samp{R},
+respectively.  I believe @samp{a} is an AIX invention; @samp{v} is
+supported by all stabs-using systems as far as I know.
+
+@node Conformant Arrays
+@subsection Passing Conformant Array Parameters
+
+@c Is this paragraph correct?  It is based on piecing together patchy
+@c information and some guesswork
+Conformant arrays are a feature of Modula-2, and perhaps other
+languages, in which the size of an array parameter is not known to the
+called function until run-time.  Such parameters have two stabs: a
+@samp{x} for the array itself, and a @samp{C}, which represents the size
+of the array.  The value of the @samp{x} stab is the offset in the
+argument list where the address of the array is stored (it this right?
+it is a guess); the value of the @samp{C} stab is the offset in the
+argument list where the size of the array (in elements? in bytes?) is
+stored.
+
+@node Types
+@chapter Defining Types
+
+The examples so far have described types as references to previously
+defined types, or defined in terms of subranges of or pointers to
+previously defined types.  This chapter describes the other type
+descriptors that may follow the @samp{=} in a type definition.
+
+@menu
+* Builtin Types::		Integers, floating point, void, etc.
+* Miscellaneous Types::		Pointers, sets, files, etc.
+* Cross-References::		Referring to a type not yet defined.
+* Subranges::			A type with a specific range.
+* Arrays::			An aggregate type of same-typed elements.
+* Strings::			Like an array but also has a length.
+* Enumerations::		Like an integer but the values have names.
+* Structures::			An aggregate type of different-typed elements.
+* Typedefs::			Giving a type a name.
+* Unions::			Different types sharing storage.
+* Function Types::
+@end menu
+
+@node Builtin Types
+@section Builtin Types
+
+Certain types are built in (@code{int}, @code{short}, @code{void},
+@code{float}, etc.); the debugger recognizes these types and knows how
+to handle them.  Thus, don't be surprised if some of the following ways
+of specifying builtin types do not specify everything that a debugger
+would need to know about the type---in some cases they merely specify
+enough information to distinguish the type from other types.
+
+The traditional way to define builtin types is convolunted, so new ways
+have been invented to describe them.  Sun's @code{acc} uses special
+builtin type descriptors (@samp{b} and @samp{R}), and IBM uses negative
+type numbers.  GDB accepts all three ways, as of version 4.8; dbx just
+accepts the traditional builtin types and perhaps one of the other two
+formats.  The following sections describe each of these formats.
+
+@menu
+* Traditional Builtin Types::	Put on your seatbelts and prepare for kludgery
+* Builtin Type Descriptors::	Builtin types with special type descriptors
+* Negative Type Numbers::	Builtin types using negative type numbers
+@end menu
+
+@node Traditional Builtin Types
+@subsection Traditional Builtin Types
+
+This is the traditional, convoluted method for defining builtin types.
+There are several classes of such type definitions: integer, floating
+point, and @code{void}.
+
+@menu
+* Traditional Integer Types::
+* Traditional Other Types::
+@end menu
+
+@node Traditional Integer Types
+@subsubsection Traditional Integer Types
+
+Often types are defined as subranges of themselves.  If the bounding values
+fit within an @code{int}, then they are given normally.  For example:
+
+@example
+.stabs "int:t1=r1;-2147483648;2147483647;",128,0,0,0    # @r{128 is N_LSYM}
+.stabs "char:t2=r2;0;127;",128,0,0,0
+@end example
+
+Builtin types can also be described as subranges of @code{int}:
+
+@example
+.stabs "unsigned short:t6=r1;0;65535;",128,0,0,0
+@end example
+
+If the lower bound of a subrange is 0 and the upper bound is -1,
+the type is an unsigned integral type whose bounds are too
+big to describe in an @code{int}.  Traditionally this is only used for
+@code{unsigned int} and @code{unsigned long}:
+
+@example
+.stabs "unsigned int:t4=r1;0;-1;",128,0,0,0
+@end example
+
+For larger types, GCC 2.4.5 puts out bounds in octal, with one or more
+leading zeroes.  In this case a negative bound consists of a number
+which is a 1 bit (for the sign bit) followed by a 0 bit for each bit in
+the number (except the sign bit), and a positive bound is one which is a
+1 bit for each bit in the number (except possibly the sign bit).  All
+known versions of dbx and GDB version 4 accept this (at least in the
+sense of not refusing to process the file), but GDB 3.5 refuses to read
+the whole file containing such symbols.  So GCC 2.3.3 did not output the
+proper size for these types.  As an example of octal bounds, the string
+fields of the stabs for 64 bit integer types look like:
+
+@c .stabs directives, etc., omitted to make it fit on the page.
+@example
+long int:t3=r1;001000000000000000000000;000777777777777777777777;
+long unsigned int:t5=r1;000000000000000000000000;001777777777777777777777;
+@end example
+
+If the lower bound of a subrange is 0 and the upper bound is negative,
+the type is an unsigned integral type whose size in bytes is the
+absolute value of the upper bound.  I believe this is a Convex
+convention for @code{unsigned long long}.
+
+If the lower bound of a subrange is negative and the upper bound is 0,
+the type is a signed integral type whose size in bytes is
+the absolute value of the lower bound.  I believe this is a Convex
+convention for @code{long long}.  To distinguish this from a legitimate
+subrange, the type should be a subrange of itself.  I'm not sure whether
+this is the case for Convex.
+
+@node Traditional Other Types
+@subsubsection Traditional Other Types
+
+If the upper bound of a subrange is 0 and the lower bound is positive,
+the type is a floating point type, and the lower bound of the subrange
+indicates the number of bytes in the type:
+
+@example
+.stabs "float:t12=r1;4;0;",128,0,0,0
+.stabs "double:t13=r1;8;0;",128,0,0,0
+@end example
+
+However, GCC writes @code{long double} the same way it writes
+@code{double}, so there is no way to distinguish.
+
+@example
+.stabs "long double:t14=r1;8;0;",128,0,0,0
+@end example
+
+Complex types are defined the same way as floating-point types; there is
+no way to distinguish a single-precision complex from a double-precision
+floating-point type.
+
+The C @code{void} type is defined as itself:
+
+@example
+.stabs "void:t15=15",128,0,0,0
+@end example
+
+I'm not sure how a boolean type is represented.
+
+@node Builtin Type Descriptors
+@subsection Defining Builtin Types Using Builtin Type Descriptors
+
+This is the method used by Sun's @code{acc} for defining builtin types.
+These are the type descriptors to define builtin types:
+
+@table @code
+@c FIXME: clean up description of width and offset, once we figure out
+@c what they mean
+@item b @var{signed} @var{char-flag} @var{width} ; @var{offset} ; @var{nbits} ;
+Define an integral type.  @var{signed} is @samp{u} for unsigned or
+@samp{s} for signed.  @var{char-flag} is @samp{c} which indicates this
+is a character type, or is omitted.  I assume this is to distinguish an
+integral type from a character type of the same size, for example it
+might make sense to set it for the C type @code{wchar_t} so the debugger
+can print such variables differently (Solaris does not do this).  Sun
+sets it on the C types @code{signed char} and @code{unsigned char} which
+arguably is wrong.  @var{width} and @var{offset} appear to be for small
+objects stored in larger ones, for example a @code{short} in an
+@code{int} register.  @var{width} is normally the number of bytes in the
+type.  @var{offset} seems to always be zero.  @var{nbits} is the number
+of bits in the type.
+
+Note that type descriptor @samp{b} used for builtin types conflicts with
+its use for Pascal space types (@pxref{Miscellaneous Types}); they can
+be distinguished because the character following the type descriptor
+will be a digit, @samp{(}, or @samp{-} for a Pascal space type, or
+@samp{u} or @samp{s} for a builtin type.
+
+@item w
+Documented by AIX to define a wide character type, but their compiler
+actually uses negative type numbers (@pxref{Negative Type Numbers}).
+
+@item R @var{fp-type} ; @var{bytes} ;
+Define a floating point type.  @var{fp-type} has one of the following values:
+
+@table @code
+@item 1 (NF_SINGLE)
+IEEE 32-bit (single precision) floating point format.
+
+@item 2 (NF_DOUBLE)
+IEEE 64-bit (double precision) floating point format.
+
+@item 3 (NF_COMPLEX)
+@item 4 (NF_COMPLEX16)
+@item 5 (NF_COMPLEX32)
+@c "GDB source" really means @file{include/aout/stab_gnu.h}, but trying
+@c to put that here got an overfull hbox.
+These are for complex numbers.  A comment in the GDB source describes
+them as Fortran @code{complex}, @code{double complex}, and
+@code{complex*16}, respectively, but what does that mean?  (i.e., Single
+precision?  Double precison?).
+
+@item 6 (NF_LDOUBLE)
+Long double.  This should probably only be used for Sun format
+@code{long double}, and new codes should be used for other floating
+point formats (@code{NF_DOUBLE} can be used if a @code{long double} is
+really just an IEEE double, of course).
+@end table
+
+@var{bytes} is the number of bytes occupied by the type.  This allows a
+debugger to perform some operations with the type even if it doesn't
+understand @var{fp-type}.
+
+@item g @var{type-information} ; @var{nbits}
+Documented by AIX to define a floating type, but their compiler actually
+uses negative type numbers (@pxref{Negative Type Numbers}).
+
+@item c @var{type-information} ; @var{nbits}
+Documented by AIX to define a complex type, but their compiler actually
+uses negative type numbers (@pxref{Negative Type Numbers}).
+@end table
+
+The C @code{void} type is defined as a signed integral type 0 bits long:
+@example
+.stabs "void:t19=bs0;0;0",128,0,0,0
+@end example
+The Solaris compiler seems to omit the trailing semicolon in this case.
+Getting sloppy in this way is not a swift move because if a type is
+embedded in a more complex expression it is necessary to be able to tell
+where it ends.
+
+I'm not sure how a boolean type is represented.
+
+@node Negative Type Numbers
+@subsection Negative Type Numbers
+
+This is the method used in XCOFF for defining builtin types.
+Since the debugger knows about the builtin types anyway, the idea of
+negative type numbers is simply to give a special type number which
+indicates the builtin type.  There is no stab defining these types.
+
+There are several subtle issues with negative type numbers.
+
+One is the size of the type.  A builtin type (for example the C types
+@code{int} or @code{long}) might have different sizes depending on
+compiler options, the target architecture, the ABI, etc.  This issue
+doesn't come up for IBM tools since (so far) they just target the
+RS/6000; the sizes indicated below for each size are what the IBM
+RS/6000 tools use.  To deal with differing sizes, either define separate
+negative type numbers for each size (which works but requires changing
+the debugger, and, unless you get both AIX dbx and GDB to accept the
+change, introduces an incompatibility), or use a type attribute
+(@pxref{String Field}) to define a new type with the appropriate size
+(which merely requires a debugger which understands type attributes,
+like AIX dbx or GDB).  For example,
+
+@example
+.stabs "boolean:t10=@@s8;-16",128,0,0,0
+@end example
+
+defines an 8-bit boolean type, and
+
+@example
+.stabs "boolean:t10=@@s64;-16",128,0,0,0
+@end example
+
+defines a 64-bit boolean type.
+
+A similar issue is the format of the type.  This comes up most often for
+floating-point types, which could have various formats (particularly
+extended doubles, which vary quite a bit even among IEEE systems).
+Again, it is best to define a new negative type number for each
+different format; changing the format based on the target system has
+various problems.  One such problem is that the Alpha has both VAX and
+IEEE floating types.  One can easily imagine one library using the VAX
+types and another library in the same executable using the IEEE types.
+Another example is that the interpretation of whether a boolean is true
+or false can be based on the least significant bit, most significant
+bit, whether it is zero, etc., and different compilers (or different
+options to the same compiler) might provide different kinds of boolean.
+
+The last major issue is the names of the types.  The name of a given
+type depends @emph{only} on the negative type number given; these do not
+vary depending on the language, the target system, or anything else.
+One can always define separate type numbers---in the following list you
+will see for example separate @code{int} and @code{integer*4} types
+which are identical except for the name.  But compatibility can be
+maintained by not inventing new negative type numbers and instead just
+defining a new type with a new name.  For example:
+
+@example
+.stabs "CARDINAL:t10=-8",128,0,0,0
+@end example
+
+Here is the list of negative type numbers.  The phrase @dfn{integral
+type} is used to mean twos-complement (I strongly suspect that all
+machines which use stabs use twos-complement; most machines use
+twos-complement these days).
+
+@table @code
+@item -1
+@code{int}, 32 bit signed integral type.
+
+@item -2
+@code{char}, 8 bit type holding a character.   Both GDB and dbx on AIX
+treat this as signed.  GCC uses this type whether @code{char} is signed
+or not, which seems like a bad idea.  The AIX compiler (@code{xlc}) seems to
+avoid this type; it uses -5 instead for @code{char}.
+
+@item -3
+@code{short}, 16 bit signed integral type.
+
+@item -4
+@code{long}, 32 bit signed integral type.
+
+@item -5
+@code{unsigned char}, 8 bit unsigned integral type.
+
+@item -6
+@code{signed char}, 8 bit signed integral type.
+
+@item -7
+@code{unsigned short}, 16 bit unsigned integral type.
+
+@item -8
+@code{unsigned int}, 32 bit unsigned integral type.
+
+@item -9
+@code{unsigned}, 32 bit unsigned integral type.
+
+@item -10
+@code{unsigned long}, 32 bit unsigned integral type.
+
+@item -11
+@code{void}, type indicating the lack of a value.
+
+@item -12
+@code{float}, IEEE single precision.
+
+@item -13
+@code{double}, IEEE double precision.
+
+@item -14
+@code{long double}, IEEE double precision.  The compiler claims the size
+will increase in a future release, and for binary compatibility you have
+to avoid using @code{long double}.  I hope when they increase it they
+use a new negative type number.
+
+@item -15
+@code{integer}.  32 bit signed integral type.
+
+@item -16
+@code{boolean}.  32 bit type.  GDB and GCC assume that zero is false,
+one is true, and other values have unspecified meaning.  I hope this
+agrees with how the IBM tools use the type.
+
+@item -17
+@code{short real}.  IEEE single precision.
+
+@item -18
+@code{real}.  IEEE double precision.
+
+@item -19
+@code{stringptr}.  @xref{Strings}.
+
+@item -20
+@code{character}, 8 bit unsigned character type.
+
+@item -21
+@code{logical*1}, 8 bit type.  This Fortran type has a split
+personality in that it is used for boolean variables, but can also be
+used for unsigned integers.  0 is false, 1 is true, and other values are
+non-boolean.
+
+@item -22
+@code{logical*2}, 16 bit type.  This Fortran type has a split
+personality in that it is used for boolean variables, but can also be
+used for unsigned integers.  0 is false, 1 is true, and other values are
+non-boolean.
+
+@item -23
+@code{logical*4}, 32 bit type.  This Fortran type has a split
+personality in that it is used for boolean variables, but can also be
+used for unsigned integers.  0 is false, 1 is true, and other values are
+non-boolean.
+
+@item -24
+@code{logical}, 32 bit type.  This Fortran type has a split
+personality in that it is used for boolean variables, but can also be
+used for unsigned integers.  0 is false, 1 is true, and other values are
+non-boolean.
+
+@item -25
+@code{complex}.  A complex type consisting of two IEEE single-precision
+floating point values.
+
+@item -26
+@code{complex}.  A complex type consisting of two IEEE double-precision
+floating point values.
+
+@item -27
+@code{integer*1}, 8 bit signed integral type.
+
+@item -28
+@code{integer*2}, 16 bit signed integral type.
+
+@item -29
+@code{integer*4}, 32 bit signed integral type.
+
+@item -30
+@code{wchar}.  Wide character, 16 bits wide, unsigned (what format?
+Unicode?).
+
+@item -31
+@code{long long}, 64 bit signed integral type.
+
+@item -32
+@code{unsigned long long}, 64 bit unsigned integral type.
+
+@item -33
+@code{logical*8}, 64 bit unsigned integral type.
+
+@item -34
+@code{integer*8}, 64 bit signed integral type.
+@end table
+
+@node Miscellaneous Types
+@section Miscellaneous Types
+
+@table @code
+@item b @var{type-information} ; @var{bytes}
+Pascal space type.  This is documented by IBM; what does it mean?
+
+This use of the @samp{b} type descriptor can be distinguished
+from its use for builtin integral types (@pxref{Builtin Type
+Descriptors}) because the character following the type descriptor is
+always a digit, @samp{(}, or @samp{-}.
+
+@item B @var{type-information}
+A volatile-qualified version of @var{type-information}.  This is
+a Sun extension.  References and stores to a variable with a
+volatile-qualified type must not be optimized or cached; they
+must occur as the user specifies them.
+
+@item d @var{type-information}
+File of type @var{type-information}.  As far as I know this is only used
+by Pascal.
+
+@item k @var{type-information}
+A const-qualified version of @var{type-information}.  This is a Sun
+extension.  A variable with a const-qualified type cannot be modified.
+
+@item M @var{type-information} ; @var{length}
+Multiple instance type.  The type seems to composed of @var{length}
+repetitions of @var{type-information}, for example @code{character*3} is
+represented by @samp{M-2;3}, where @samp{-2} is a reference to a
+character type (@pxref{Negative Type Numbers}).  I'm not sure how this
+differs from an array.  This appears to be a Fortran feature.
+@var{length} is a bound, like those in range types; see @ref{Subranges}.
+
+@item S @var{type-information}
+Pascal set type.  @var{type-information} must be a small type such as an
+enumeration or a subrange, and the type is a bitmask whose length is
+specified by the number of elements in @var{type-information}.
+
+In CHILL, if it is a bitstring instead of a set, also use the @samp{S}
+type attribute (@pxref{String Field}).
+
+@item * @var{type-information}
+Pointer to @var{type-information}.
+@end table
+
+@node Cross-References
+@section Cross-References to Other Types
+
+A type can be used before it is defined; one common way to deal with
+that situation is just to use a type reference to a type which has not
+yet been defined.
+
+Another way is with the @samp{x} type descriptor, which is followed by
+@samp{s} for a structure tag, @samp{u} for a union tag, or @samp{e} for
+a enumerator tag, followed by the name of the tag, followed by @samp{:}.
+If the name contains @samp{::} between a @samp{<} and @samp{>} pair (for
+C++ templates), such a @samp{::} does not end the name---only a single
+@samp{:} ends the name; see @ref{Nested Symbols}.
+
+For example, the following C declarations:
+
+@example
+struct foo;
+struct foo *bar;
+@end example
+
+@noindent
+produce:
+
+@example
+.stabs "bar:G16=*17=xsfoo:",32,0,0,0
+@end example
+
+Not all debuggers support the @samp{x} type descriptor, so on some
+machines GCC does not use it.  I believe that for the above example it
+would just emit a reference to type 17 and never define it, but I
+haven't verified that.
+
+Modula-2 imported types, at least on AIX, use the @samp{i} type
+descriptor, which is followed by the name of the module from which the
+type is imported, followed by @samp{:}, followed by the name of the
+type.  There is then optionally a comma followed by type information for
+the type.  This differs from merely naming the type (@pxref{Typedefs}) in
+that it identifies the module; I don't understand whether the name of
+the type given here is always just the same as the name we are giving
+it, or whether this type descriptor is used with a nameless stab
+(@pxref{String Field}), or what.  The symbol ends with @samp{;}.
+
+@node Subranges
+@section Subrange Types
+
+The @samp{r} type descriptor defines a type as a subrange of another
+type.  It is followed by type information for the type of which it is a
+subrange, a semicolon, an integral lower bound, a semicolon, an
+integral upper bound, and a semicolon.  The AIX documentation does not
+specify the trailing semicolon, in an effort to specify array indexes
+more cleanly, but a subrange which is not an array index has always
+included a trailing semicolon (@pxref{Arrays}).
+
+Instead of an integer, either bound can be one of the following:
+
+@table @code
+@item A @var{offset}
+The bound is passed by reference on the stack at offset @var{offset}
+from the argument list.  @xref{Parameters}, for more information on such
+offsets.
+
+@item T @var{offset}
+The bound is passed by value on the stack at offset @var{offset} from
+the argument list.
+
+@item a @var{register-number}
+The bound is pased by reference in register number
+@var{register-number}.
+
+@item t @var{register-number}
+The bound is passed by value in register number @var{register-number}.
+
+@item J
+There is no bound.
+@end table
+
+Subranges are also used for builtin types; see @ref{Traditional Builtin Types}.
+
+@node Arrays
+@section Array Types
+
+Arrays use the @samp{a} type descriptor.  Following the type descriptor
+is the type of the index and the type of the array elements.  If the
+index type is a range type, it ends in a semicolon; otherwise
+(for example, if it is a type reference), there does not
+appear to be any way to tell where the types are separated.  In an
+effort to clean up this mess, IBM documents the two types as being
+separated by a semicolon, and a range type as not ending in a semicolon
+(but this is not right for range types which are not array indexes,
+@pxref{Subranges}).  I think probably the best solution is to specify
+that a semicolon ends a range type, and that the index type and element
+type of an array are separated by a semicolon, but that if the index
+type is a range type, the extra semicolon can be omitted.  GDB (at least
+through version 4.9) doesn't support any kind of index type other than a
+range anyway; I'm not sure about dbx.
+
+It is well established, and widely used, that the type of the index,
+unlike most types found in the stabs, is merely a type definition, not
+type information (@pxref{String Field}) (that is, it need not start with
+@samp{@var{type-number}=} if it is defining a new type).  According to a
+comment in GDB, this is also true of the type of the array elements; it
+gives @samp{ar1;1;10;ar1;1;10;4} as a legitimate way to express a two
+dimensional array.  According to AIX documentation, the element type
+must be type information.  GDB accepts either.
+
+The type of the index is often a range type, expressed as the type
+descriptor @samp{r} and some parameters.  It defines the size of the
+array.  In the example below, the range @samp{r1;0;2;} defines an index
+type which is a subrange of type 1 (integer), with a lower bound of 0
+and an upper bound of 2.  This defines the valid range of subscripts of
+a three-element C array.
+
+For example, the definition:
+
+@example
+char char_vec[3] = @{'a','b','c'@};
+@end example
+
+@noindent
+produces the output:
+
+@example
+.stabs "char_vec:G19=ar1;0;2;2",32,0,0,0
+     .global _char_vec
+     .align 4
+_char_vec:
+     .byte 97
+     .byte 98
+     .byte 99
+@end example
+
+If an array is @dfn{packed}, the elements are spaced more
+closely than normal, saving memory at the expense of speed.  For
+example, an array of 3-byte objects might, if unpacked, have each
+element aligned on a 4-byte boundary, but if packed, have no padding.
+One way to specify that something is packed is with type attributes
+(@pxref{String Field}).  In the case of arrays, another is to use the
+@samp{P} type descriptor instead of @samp{a}.  Other than specifying a
+packed array, @samp{P} is identical to @samp{a}.
+
+@c FIXME-what is it?  A pointer?
+An open array is represented by the @samp{A} type descriptor followed by
+type information specifying the type of the array elements.
+
+@c FIXME: what is the format of this type?  A pointer to a vector of pointers?
+An N-dimensional dynamic array is represented by
+
+@example
+D @var{dimensions} ; @var{type-information}
+@end example
+
+@c Does dimensions really have this meaning?  The AIX documentation
+@c doesn't say.
+@var{dimensions} is the number of dimensions; @var{type-information}
+specifies the type of the array elements.
+
+@c FIXME: what is the format of this type?  A pointer to some offsets in
+@c another array?
+A subarray of an N-dimensional array is represented by
+
+@example
+E @var{dimensions} ; @var{type-information}
+@end example
+
+@c Does dimensions really have this meaning?  The AIX documentation
+@c doesn't say.
+@var{dimensions} is the number of dimensions; @var{type-information}
+specifies the type of the array elements.
+
+@node Strings
+@section Strings
+
+Some languages, like C or the original Pascal, do not have string types,
+they just have related things like arrays of characters.  But most
+Pascals and various other languages have string types, which are
+indicated as follows:
+
+@table @code
+@item n @var{type-information} ; @var{bytes}
+@var{bytes} is the maximum length.  I'm not sure what
+@var{type-information} is; I suspect that it means that this is a string
+of @var{type-information} (thus allowing a string of integers, a string
+of wide characters, etc., as well as a string of characters).  Not sure
+what the format of this type is.  This is an AIX feature.
+
+@item z @var{type-information} ; @var{bytes}
+Just like @samp{n} except that this is a gstring, not an ordinary
+string.  I don't know the difference.
+
+@item N
+Pascal Stringptr.  What is this?  This is an AIX feature.
+@end table
+
+Languages, such as CHILL which have a string type which is basically
+just an array of characters use the @samp{S} type attribute
+(@pxref{String Field}).
+
+@node Enumerations
+@section Enumerations
+
+Enumerations are defined with the @samp{e} type descriptor.
+
+@c FIXME: Where does this information properly go?  Perhaps it is
+@c redundant with something we already explain.
+The source line below declares an enumeration type at file scope.
+The type definition is located after the @code{N_RBRAC} that marks the end of
+the previous procedure's block scope, and before the @code{N_FUN} that marks
+the beginning of the next procedure's block scope.  Therefore it does not
+describe a block local symbol, but a file local one.
+
+The source line:
+
+@example
+enum e_places @{first,second=3,last@};
+@end example
+
+@noindent
+generates the following stab:
+
+@example
+.stabs "e_places:T22=efirst:0,second:3,last:4,;",128,0,0,0
+@end example
+
+The symbol descriptor (@samp{T}) says that the stab describes a
+structure, enumeration, or union tag.  The type descriptor @samp{e},
+following the @samp{22=} of the type definition narrows it down to an
+enumeration type.  Following the @samp{e} is a list of the elements of
+the enumeration.  The format is @samp{@var{name}:@var{value},}.  The
+list of elements ends with @samp{;}.  The fact that @var{value} is
+specified as an integer can cause problems if the value is large.  GCC
+2.5.2 tries to output it in octal in that case with a leading zero,
+which is probably a good thing, although GDB 4.11 supports octal only in
+cases where decimal is perfectly good.  Negative decimal values are
+supported by both GDB and dbx.
+
+There is no standard way to specify the size of an enumeration type; it
+is determined by the architecture (normally all enumerations types are
+32 bits).  Type attributes can be used to specify an enumeration type of
+another size for debuggers which support them; see @ref{String Field}.
+
+Enumeration types are unusual in that they define symbols for the
+enumeration values (@code{first}, @code{second}, and @code{third} in the
+above example), and even though these symbols are visible in the file as
+a whole (rather than being in a more local namespace like structure
+member names), they are defined in the type definition for the
+enumeration type rather than each having their own symbol.  In order to
+be fast, GDB will only get symbols from such types (in its initial scan
+of the stabs) if the type is the first thing defined after a @samp{T} or
+@samp{t} symbol descriptor (the above example fulfills this
+requirement).  If the type does not have a name, the compiler should
+emit it in a nameless stab (@pxref{String Field}); GCC does this.
+
+@node Structures
+@section Structures
+
+The encoding of structures in stabs can be shown with an example.
+
+The following source code declares a structure tag and defines an
+instance of the structure in global scope. Then a @code{typedef} equates the
+structure tag with a new type.  Seperate stabs are generated for the
+structure tag, the structure @code{typedef}, and the structure instance.  The
+stabs for the tag and the @code{typedef} are emited when the definitions are
+encountered.  Since the structure elements are not initialized, the
+stab and code for the structure variable itself is located at the end
+of the program in the bss section.
+
+@example
+struct s_tag @{
+  int   s_int;
+  float s_float;
+  char  s_char_vec[8];
+  struct s_tag* s_next;
+@} g_an_s;
+
+typedef struct s_tag s_typedef;
+@end example
+
+The structure tag has an @code{N_LSYM} stab type because, like the
+enumeration, the symbol has file scope.  Like the enumeration, the
+symbol descriptor is @samp{T}, for enumeration, structure, or tag type.
+The type descriptor @samp{s} following the @samp{16=} of the type
+definition narrows the symbol type to structure.
+
+Following the @samp{s} type descriptor is the number of bytes the
+structure occupies, followed by a description of each structure element.
+The structure element descriptions are of the form @var{name:type, bit
+offset from the start of the struct, number of bits in the element}.
+
+@c FIXME: phony line break.  Can probably be fixed by using an example
+@c with fewer fields.
+@example
+# @r{128 is N_LSYM}
+.stabs "s_tag:T16=s20s_int:1,0,32;s_float:12,32,32;
+        s_char_vec:17=ar1;0;7;2,64,64;s_next:18=*16,128,32;;",128,0,0,0
+@end example
+
+In this example, the first two structure elements are previously defined
+types.  For these, the type following the @samp{@var{name}:} part of the
+element description is a simple type reference.  The other two structure
+elements are new types.  In this case there is a type definition
+embedded after the @samp{@var{name}:}.  The type definition for the
+array element looks just like a type definition for a standalone array.
+The @code{s_next} field is a pointer to the same kind of structure that
+the field is an element of.  So the definition of structure type 16
+contains a type definition for an element which is a pointer to type 16.
+
+If a field is a static member (this is a C++ feature in which a single
+variable appears to be a field of every structure of a given type) it
+still starts out with the field name, a colon, and the type, but then
+instead of a comma, bit position, comma, and bit size, there is a colon
+followed by the name of the variable which each such field refers to.
+
+If the structure has methods (a C++ feature), they follow the non-method
+fields; see @ref{Cplusplus}.
+
+@node Typedefs
+@section Giving a Type a Name
+
+@findex N_LSYM, for types
+@findex C_DECL, for types
+To give a type a name, use the @samp{t} symbol descriptor.  The type
+is specified by the type information (@pxref{String Field}) for the stab.
+For example,
+
+@example
+.stabs "s_typedef:t16",128,0,0,0     # @r{128 is N_LSYM}
+@end example
+
+specifies that @code{s_typedef} refers to type number 16.  Such stabs
+have symbol type @code{N_LSYM} (or @code{C_DECL} for XCOFF).  (The Sun
+documentation mentions using @code{N_GSYM} in some cases).
+
+If you are specifying the tag name for a structure, union, or
+enumeration, use the @samp{T} symbol descriptor instead.  I believe C is
+the only language with this feature.
+
+If the type is an opaque type (I believe this is a Modula-2 feature),
+AIX provides a type descriptor to specify it.  The type descriptor is
+@samp{o} and is followed by a name.  I don't know what the name
+means---is it always the same as the name of the type, or is this type
+descriptor used with a nameless stab (@pxref{String Field})?  There
+optionally follows a comma followed by type information which defines
+the type of this type.  If omitted, a semicolon is used in place of the
+comma and the type information, and the type is much like a generic
+pointer type---it has a known size but little else about it is
+specified.
+
+@node Unions
+@section Unions
+
+@example
+union u_tag @{
+  int  u_int;
+  float u_float;
+  char* u_char;
+@} an_u;
+@end example
+
+This code generates a stab for a union tag and a stab for a union
+variable.  Both use the @code{N_LSYM} stab type.  If a union variable is
+scoped locally to the procedure in which it is defined, its stab is
+located immediately preceding the @code{N_LBRAC} for the procedure's block
+start.
+
+The stab for the union tag, however, is located preceding the code for
+the procedure in which it is defined.  The stab type is @code{N_LSYM}.  This
+would seem to imply that the union type is file scope, like the struct
+type @code{s_tag}.  This is not true.  The contents and position of the stab
+for @code{u_type} do not convey any infomation about its procedure local
+scope.
+
+@c FIXME: phony line break.  Can probably be fixed by using an example
+@c with fewer fields.
+@smallexample
+# @r{128 is N_LSYM}
+.stabs "u_tag:T23=u4u_int:1,0,32;u_float:12,0,32;u_char:21,0,32;;",
+       128,0,0,0
+@end smallexample
+
+The symbol descriptor @samp{T}, following the @samp{name:} means that
+the stab describes an enumeration, structure, or union tag.  The type
+descriptor @samp{u}, following the @samp{23=} of the type definition,
+narrows it down to a union type definition.  Following the @samp{u} is
+the number of bytes in the union.  After that is a list of union element
+descriptions.  Their format is @var{name:type, bit offset into the
+union, number of bytes for the element;}.
+
+The stab for the union variable is:
+
+@example
+.stabs "an_u:23",128,0,0,-20     # @r{128 is N_LSYM}
+@end example
+
+@samp{-20} specifies where the variable is stored (@pxref{Stack
+Variables}).
+
+@node Function Types
+@section Function Types
+
+Various types can be defined for function variables.  These types are
+not used in defining functions (@pxref{Procedures}); they are used for
+things like pointers to functions.
+
+The simple, traditional, type is type descriptor @samp{f} is followed by
+type information for the return type of the function, followed by a
+semicolon.
+
+This does not deal with functions for which the number and types of the
+parameters are part of the type, as in Modula-2 or ANSI C.  AIX provides
+extensions to specify these, using the @samp{f}, @samp{F}, @samp{p}, and
+@samp{R} type descriptors.
+
+First comes the type descriptor.  If it is @samp{f} or @samp{F}, this
+type involves a function rather than a procedure, and the type
+information for the return type of the function follows, followed by a
+comma.  Then comes the number of parameters to the function and a
+semicolon.  Then, for each parameter, there is the name of the parameter
+followed by a colon (this is only present for type descriptors @samp{R}
+and @samp{F} which represent Pascal function or procedure parameters),
+type information for the parameter, a comma, 0 if passed by reference or
+1 if passed by value, and a semicolon.  The type definition ends with a
+semicolon.
+
+For example, this variable definition:
+
+@example
+int (*g_pf)();
+@end example
+
+@noindent
+generates the following code:
+
+@example
+.stabs "g_pf:G24=*25=f1",32,0,0,0
+    .common _g_pf,4,"bss"
+@end example
+
+The variable defines a new type, 24, which is a pointer to another new
+type, 25, which is a function returning @code{int}.
+
+@node Symbol Tables
+@chapter Symbol Information in Symbol Tables
+
+This chapter describes the format of symbol table entries
+and how stab assembler directives map to them.  It also describes the
+transformations that the assembler and linker make on data from stabs.
+
+@menu
+* Symbol Table Format::
+* Transformations On Symbol Tables::
+@end menu
+
+@node Symbol Table Format
+@section Symbol Table Format
+
+Each time the assembler encounters a stab directive, it puts
+each field of the stab into a corresponding field in a symbol table
+entry of its output file.  If the stab contains a string field, the
+symbol table entry for that stab points to a string table entry
+containing the string data from the stab.  Assembler labels become
+relocatable addresses.  Symbol table entries in a.out have the format:
+
+@c FIXME: should refer to external, not internal.
+@example
+struct internal_nlist @{
+  unsigned long n_strx;         /* index into string table of name */
+  unsigned char n_type;         /* type of symbol */
+  unsigned char n_other;        /* misc info (usually empty) */
+  unsigned short n_desc;        /* description field */
+  bfd_vma n_value;              /* value of symbol */
+@};
+@end example
+
+If the stab has a string, the @code{n_strx} field holds the offset in
+bytes of the string within the string table.  The string is terminated
+by a NUL character.  If the stab lacks a string (for example, it was
+produced by a @code{.stabn} or @code{.stabd} directive), the
+@code{n_strx} field is zero.
+
+Symbol table entries with @code{n_type} field values greater than 0x1f
+originated as stabs generated by the compiler (with one random
+exception).  The other entries were placed in the symbol table of the
+executable by the assembler or the linker.
+
+@node Transformations On Symbol Tables
+@section Transformations on Symbol Tables
+
+The linker concatenates object files and does fixups of externally
+defined symbols.
+
+You can see the transformations made on stab data by the assembler and
+linker by examining the symbol table after each pass of the build.  To
+do this, use @samp{nm -ap}, which dumps the symbol table, including
+debugging information, unsorted.  For stab entries the columns are:
+@var{value}, @var{other}, @var{desc}, @var{type}, @var{string}.  For
+assembler and linker symbols, the columns are: @var{value}, @var{type},
+@var{string}.
+
+The low 5 bits of the stab type tell the linker how to relocate the
+value of the stab.  Thus for stab types like @code{N_RSYM} and
+@code{N_LSYM}, where the value is an offset or a register number, the
+low 5 bits are @code{N_ABS}, which tells the linker not to relocate the
+value.
+
+Where the value of a stab contains an assembly language label,
+it is transformed by each build step.  The assembler turns it into a
+relocatable address and the linker turns it into an absolute address.
+
+@menu
+* Transformations On Static Variables::
+* Transformations On Global Variables::
+* Stab Section Transformations::	   For some object file formats,
+                                           things are a bit different.
+@end menu
+
+@node Transformations On Static Variables
+@subsection Transformations on Static Variables
+
+This source line defines a static variable at file scope:
+
+@example
+static int s_g_repeat
+@end example
+
+@noindent
+The following stab describes the symbol:
+
+@example
+.stabs "s_g_repeat:S1",38,0,0,_s_g_repeat
+@end example
+
+@noindent
+The assembler transforms the stab into this symbol table entry in the
+@file{.o} file.  The location is expressed as a data segment offset.
+
+@example
+00000084 - 00 0000 STSYM s_g_repeat:S1
+@end example
+
+@noindent
+In the symbol table entry from the executable, the linker has made the
+relocatable address absolute.
+
+@example
+0000e00c - 00 0000 STSYM s_g_repeat:S1
+@end example
+
+@node Transformations On Global Variables
+@subsection Transformations on Global Variables
+
+Stabs for global variables do not contain location information. In
+this case, the debugger finds location information in the assembler or
+linker symbol table entry describing the variable.  The source line:
+
+@example
+char g_foo = 'c';
+@end example
+
+@noindent
+generates the stab:
+
+@example
+.stabs "g_foo:G2",32,0,0,0
+@end example
+
+The variable is represented by two symbol table entries in the object
+file (see below).  The first one originated as a stab.  The second one
+is an external symbol.  The upper case @samp{D} signifies that the
+@code{n_type} field of the symbol table contains 7, @code{N_DATA} with
+local linkage.  The stab's value is zero since the value is not used for
+@code{N_GSYM} stabs.  The value of the linker symbol is the relocatable
+address corresponding to the variable.
+
+@example
+00000000 - 00 0000  GSYM g_foo:G2
+00000080 D _g_foo
+@end example
+
+@noindent
+These entries as transformed by the linker.  The linker symbol table
+entry now holds an absolute address:
+
+@example
+00000000 - 00 0000  GSYM g_foo:G2
+@dots{}
+0000e008 D _g_foo
+@end example
+
+@node Stab Section Transformations
+@subsection Transformations of Stabs in separate sections
+
+For object file formats using stabs in separate sections (@pxref{Stab
+Sections}), use @code{objdump --stabs} instead of @code{nm} to show the
+stabs in an object or executable file.  @code{objdump} is a GNU utility;
+Sun does not provide any equivalent.
+
+The following example is for a stab whose value is an address is
+relative to the compilation unit (@pxref{ELF Linker Relocation}).  For
+example, if the source line
+
+@example
+static int ld = 5;
+@end example
+
+appears within a function, then the assembly language output from the
+compiler contains:
+
+@example
+.Ddata.data:
+@dots{}
+        .stabs "ld:V(0,3)",0x26,0,4,.L18-Ddata.data    # @r{0x26 is N_STSYM}
+@dots{}
+.L18:
+        .align 4
+        .word 0x5
+@end example
+
+Because the value is formed by subtracting one symbol from another, the
+value is absolute, not relocatable, and so the object file contains
+
+@example
+Symnum n_type n_othr n_desc n_value  n_strx String
+31     STSYM  0      4      00000004 680    ld:V(0,3)
+@end example
+
+without any relocations, and the executable file also contains
+
+@example
+Symnum n_type n_othr n_desc n_value  n_strx String
+31     STSYM  0      4      00000004 680    ld:V(0,3)
+@end example
+
+@node Cplusplus
+@chapter GNU C++ Stabs
+
+@menu
+* Class Names::			C++ class names are both tags and typedefs.
+* Nested Symbols::		C++ symbol names can be within other types.
+* Basic Cplusplus Types::
+* Simple Classes::
+* Class Instance::
+* Methods::			Method definition
+* Method Type Descriptor::      The @samp{#} type descriptor
+* Member Type Descriptor::      The @samp{@@} type descriptor
+* Protections::
+* Method Modifiers::
+* Virtual Methods::
+* Inheritence::
+* Virtual Base Classes::
+* Static Members::
+@end menu
+
+@node Class Names
+@section C++ Class Names
+
+In C++, a class name which is declared with @code{class}, @code{struct},
+or @code{union}, is not only a tag, as in C, but also a type name.  Thus
+there should be stabs with both @samp{t} and @samp{T} symbol descriptors
+(@pxref{Typedefs}).
+
+To save space, there is a special abbreviation for this case.  If the
+@samp{T} symbol descriptor is followed by @samp{t}, then the stab
+defines both a type name and a tag.
+
+For example, the C++ code
+
+@example
+struct foo @{int x;@};
+@end example
+
+can be represented as either
+
+@example
+.stabs "foo:T19=s4x:1,0,32;;",128,0,0,0       # @r{128 is N_LSYM}
+.stabs "foo:t19",128,0,0,0
+@end example
+
+or
+
+@example
+.stabs "foo:Tt19=s4x:1,0,32;;",128,0,0,0
+@end example
+
+@node Nested Symbols
+@section Defining a Symbol Within Another Type
+
+In C++, a symbol (such as a type name) can be defined within another type.
+@c FIXME: Needs example.
+
+In stabs, this is sometimes represented by making the name of a symbol
+which contains @samp{::}.  Such a pair of colons does not end the name
+of the symbol, the way a single colon would (@pxref{String Field}).  I'm
+not sure how consistently used or well thought out this mechanism is.
+So that a pair of colons in this position always has this meaning,
+@samp{:} cannot be used as a symbol descriptor.
+
+For example, if the string for a stab is @samp{foo::bar::baz:t5=*6},
+then @code{foo::bar::baz} is the name of the symbol, @samp{t} is the
+symbol descriptor, and @samp{5=*6} is the type information.
+
+@node Basic Cplusplus Types
+@section Basic Types For C++
+
+<< the examples that follow are based on a01.C >>
+
+
+C++ adds two more builtin types to the set defined for C.  These are
+the unknown type and the vtable record type.  The unknown type, type
+16, is defined in terms of itself like the void type.
+
+The vtable record type, type 17, is defined as a structure type and
+then as a structure tag.  The structure has four fields: delta, index,
+pfn, and delta2.  pfn is the function pointer.
+
+<< In boilerplate $vtbl_ptr_type, what are the fields delta,
+index, and delta2 used for? >>
+
+This basic type is present in all C++ programs even if there are no
+virtual methods defined.
+
+@display
+.stabs "struct_name:sym_desc(type)type_def(17)=type_desc(struct)struct_bytes(8)
+        elem_name(delta):type_ref(short int),bit_offset(0),field_bits(16);
+        elem_name(index):type_ref(short int),bit_offset(16),field_bits(16);
+        elem_name(pfn):type_def(18)=type_desc(ptr to)type_ref(void),
+                                    bit_offset(32),field_bits(32);
+        elem_name(delta2):type_def(short int);bit_offset(32),field_bits(16);;"
+        N_LSYM, NIL, NIL
+@end display
+
+@smallexample
+.stabs "$vtbl_ptr_type:t17=s8
+        delta:6,0,16;index:6,16,16;pfn:18=*15,32,32;delta2:6,32,16;;"
+        ,128,0,0,0
+@end smallexample
+
+@display
+.stabs "name:sym_dec(struct tag)type_ref($vtbl_ptr_type)",N_LSYM,NIL,NIL,NIL
+@end display
+
+@example
+.stabs "$vtbl_ptr_type:T17",128,0,0,0
+@end example
+
+@node Simple Classes
+@section Simple Class Definition
+
+The stabs describing C++ language features are an extension of the
+stabs describing C.  Stabs representing C++ class types elaborate
+extensively on the stab format used to describe structure types in C.
+Stabs representing class type variables look just like stabs
+representing C language variables.
+
+Consider the following very simple class definition.
+
+@example
+class baseA @{
+public:
+        int Adat;
+        int Ameth(int in, char other);
+@};
+@end example
+
+The class @code{baseA} is represented by two stabs.  The first stab describes
+the class as a structure type.  The second stab describes a structure
+tag of the class type.  Both stabs are of stab type @code{N_LSYM}.  Since the
+stab is not located between an @code{N_FUN} and an @code{N_LBRAC} stab this indicates
+that the class is defined at file scope.  If it were, then the @code{N_LSYM}
+would signify a local variable.
+
+A stab describing a C++ class type is similar in format to a stab
+describing a C struct, with each class member shown as a field in the
+structure.  The part of the struct format describing fields is
+expanded to include extra information relevent to C++ class members.
+In addition, if the class has multiple base classes or virtual
+functions the struct format outside of the field parts is also
+augmented.
+
+In this simple example the field part of the C++ class stab
+representing member data looks just like the field part of a C struct
+stab.  The section on protections describes how its format is
+sometimes extended for member data.
+
+The field part of a C++ class stab representing a member function
+differs substantially from the field part of a C struct stab.  It
+still begins with @samp{name:} but then goes on to define a new type number
+for the member function, describe its return type, its argument types,
+its protection level, any qualifiers applied to the method definition,
+and whether the method is virtual or not.  If the method is virtual
+then the method description goes on to give the vtable index of the
+method, and the type number of the first base class defining the
+method.
+
+When the field name is a method name it is followed by two colons rather
+than one.  This is followed by a new type definition for the method.
+This is a number followed by an equal sign and the type of the method.
+Normally this will be a type declared using the @samp{#} type
+descriptor; see @ref{Method Type Descriptor}; static member functions
+are declared using the @samp{f} type descriptor instead; see
+@ref{Function Types}.
+
+The format of an overloaded operator method name differs from that of
+other methods.  It is @samp{op$::@var{operator-name}.} where
+@var{operator-name} is the operator name such as @samp{+} or @samp{+=}.
+The name ends with a period, and any characters except the period can
+occur in the @var{operator-name} string.
+
+The next part of the method description represents the arguments to the
+method, preceeded by a colon and ending with a semi-colon.  The types of
+the arguments are expressed in the same way argument types are expressed
+in C++ name mangling.  In this example an @code{int} and a @code{char}
+map to @samp{ic}.
+
+This is followed by a number, a letter, and an asterisk or period,
+followed by another semicolon.  The number indicates the protections
+that apply to the member function.  Here the 2 means public.  The
+letter encodes any qualifier applied to the method definition.  In
+this case, @samp{A} means that it is a normal function definition.  The dot
+shows that the method is not virtual.  The sections that follow
+elaborate further on these fields and describe the additional
+information present for virtual methods.
+
+
+@display
+.stabs "class_name:sym_desc(type)type_def(20)=type_desc(struct)struct_bytes(4)
+        field_name(Adat):type(int),bit_offset(0),field_bits(32);
+
+        method_name(Ameth)::type_def(21)=type_desc(method)return_type(int);
+        :arg_types(int char);
+        protection(public)qualifier(normal)virtual(no);;"
+        N_LSYM,NIL,NIL,NIL
+@end display
+
+@smallexample
+.stabs "baseA:t20=s4Adat:1,0,32;Ameth::21=##1;:ic;2A.;;",128,0,0,0
+
+.stabs "class_name:sym_desc(struct tag)",N_LSYM,NIL,NIL,NIL
+
+.stabs "baseA:T20",128,0,0,0
+@end smallexample
+
+@node Class Instance
+@section Class Instance
+
+As shown above, describing even a simple C++ class definition is
+accomplished by massively extending the stab format used in C to
+describe structure types.  However, once the class is defined, C stabs
+with no modifications can be used to describe class instances.  The
+following source:
+
+@example
+main () @{
+        baseA AbaseA;
+@}
+@end example
+
+@noindent
+yields the following stab describing the class instance.  It looks no
+different from a standard C stab describing a local variable.
+
+@display
+.stabs "name:type_ref(baseA)", N_LSYM, NIL, NIL, frame_ptr_offset
+@end display
+
+@example
+.stabs "AbaseA:20",128,0,0,-20
+@end example
+
+@node Methods
+@section Method Definition
+
+The class definition shown above declares Ameth.  The C++ source below
+defines Ameth:
+
+@example
+int
+baseA::Ameth(int in, char other)
+@{
+        return in;
+@};
+@end example
+
+
+This method definition yields three stabs following the code of the
+method.  One stab describes the method itself and following two describe
+its parameters.  Although there is only one formal argument all methods
+have an implicit argument which is the @code{this} pointer.  The @code{this}
+pointer is a pointer to the object on which the method was called.  Note
+that the method name is mangled to encode the class name and argument
+types.  Name mangling is described in the @sc{arm} (@cite{The Annotated
+C++ Reference Manual}, by Ellis and Stroustrup, @sc{isbn}
+0-201-51459-1); @file{gpcompare.texi} in Cygnus GCC distributions
+describes the differences between GNU mangling and @sc{arm}
+mangling.
+@c FIXME: Use @xref, especially if this is generally installed in the
+@c info tree.
+@c FIXME: This information should be in a net release, either of GCC or
+@c GDB.  But gpcompare.texi doesn't seem to be in the FSF GCC.
+
+@example
+.stabs "name:symbol_desriptor(global function)return_type(int)",
+        N_FUN, NIL, NIL, code_addr_of_method_start
+
+.stabs "Ameth__5baseAic:F1",36,0,0,_Ameth__5baseAic
+@end example
+
+Here is the stab for the @code{this} pointer implicit argument.  The
+name of the @code{this} pointer is always @code{this}.  Type 19, the
+@code{this} pointer is defined as a pointer to type 20, @code{baseA},
+but a stab defining @code{baseA} has not yet been emited.  Since the
+compiler knows it will be emited shortly, here it just outputs a cross
+reference to the undefined symbol, by prefixing the symbol name with
+@samp{xs}.
+
+@example
+.stabs "name:sym_desc(register param)type_def(19)=
+        type_desc(ptr to)type_ref(baseA)=
+        type_desc(cross-reference to)baseA:",N_RSYM,NIL,NIL,register_number
+
+.stabs "this:P19=*20=xsbaseA:",64,0,0,8
+@end example
+
+The stab for the explicit integer argument looks just like a parameter
+to a C function.  The last field of the stab is the offset from the
+argument pointer, which in most systems is the same as the frame
+pointer.
+
+@example
+.stabs "name:sym_desc(value parameter)type_ref(int)",
+        N_PSYM,NIL,NIL,offset_from_arg_ptr
+
+.stabs "in:p1",160,0,0,72
+@end example
+
+<< The examples that follow are based on A1.C >>
+
+@node Method Type Descriptor
+@section The @samp{#} Type Descriptor
+
+This is used to describe a class method.  This is a function which takes
+an extra argument as its first argument, for the @code{this} pointer.
+
+If the @samp{#} is immediately followed by another @samp{#}, the second
+one will be followed by the return type and a semicolon.  The class and
+argument types are not specified, and must be determined by demangling
+the name of the method if it is available.
+
+Otherwise, the single @samp{#} is followed by the class type, a comma,
+the return type, a comma, and zero or more parameter types separated by
+commas.  The list of arguments is terminated by a semicolon.  In the
+debugging output generated by gcc, a final argument type of @code{void}
+indicates a method which does not take a variable number of arguments.
+If the final argument type of @code{void} does not appear, the method
+was declared with an ellipsis.
+
+Note that although such a type will normally be used to describe fields
+in structures, unions, or classes, for at least some versions of the
+compiler it can also be used in other contexts.
+
+@node Member Type Descriptor
+@section The @samp{@@} Type Descriptor
+
+The @samp{@@} type descriptor is for a member (class and variable) type.
+It is followed by type information for the offset basetype, a comma, and
+type information for the type of the field being pointed to.  (FIXME:
+this is acknowledged to be gibberish.  Can anyone say what really goes
+here?).
+
+Note that there is a conflict between this and type attributes
+(@pxref{String Field}); both use type descriptor @samp{@@}.
+Fortunately, the @samp{@@} type descriptor used in this C++ sense always
+will be followed by a digit, @samp{(}, or @samp{-}, and type attributes
+never start with those things.
+
+@node Protections
+@section Protections
+
+In the simple class definition shown above all member data and
+functions were publicly accessable.  The example that follows
+contrasts public, protected and privately accessable fields and shows
+how these protections are encoded in C++ stabs.
+
+If the character following the @samp{@var{field-name}:} part of the
+string is @samp{/}, then the next character is the visibility.  @samp{0}
+means private, @samp{1} means protected, and @samp{2} means public.
+Debuggers should ignore visibility characters they do not recognize, and
+assume a reasonable default (such as public) (GDB 4.11 does not, but
+this should be fixed in the next GDB release).  If no visibility is
+specified the field is public.  The visibility @samp{9} means that the
+field has been optimized out and is public (there is no way to specify
+an optimized out field with a private or protected visibility).
+Visibility @samp{9} is not supported by GDB 4.11; this should be fixed
+in the next GDB release.
+
+The following C++ source:
+
+@example
+class vis @{
+private:
+        int   priv;
+protected:
+        char  prot;
+public:
+        float pub;
+@};
+@end example
+
+@noindent
+generates the following stab:
+
+@example
+# @r{128 is N_LSYM}
+.stabs "vis:T19=s12priv:/01,0,32;prot:/12,32,8;pub:12,64,32;;",128,0,0,0
+@end example
+
+@samp{vis:T19=s12} indicates that type number 19 is a 12 byte structure
+named @code{vis} The @code{priv} field has public visibility
+(@samp{/0}), type int (@samp{1}), and offset and size @samp{,0,32;}.
+The @code{prot} field has protected visibility (@samp{/1}), type char
+(@samp{2}) and offset and size @samp{,32,8;}.  The @code{pub} field has
+type float (@samp{12}), and offset and size @samp{,64,32;}.
+
+Protections for member functions are signified by one digit embeded in
+the field part of the stab describing the method.  The digit is 0 if
+private, 1 if protected and 2 if public.  Consider the C++ class
+definition below:
+
+@example
+class all_methods @{
+private:
+        int   priv_meth(int in)@{return in;@};
+protected:
+        char  protMeth(char in)@{return in;@};
+public:
+        float pubMeth(float in)@{return in;@};
+@};
+@end example
+
+It generates the following stab.  The digit in question is to the left
+of an @samp{A} in each case.  Notice also that in this case two symbol
+descriptors apply to the class name struct tag and struct type.
+
+@display
+.stabs "class_name:sym_desc(struct tag&type)type_def(21)=
+        sym_desc(struct)struct_bytes(1)
+        meth_name::type_def(22)=sym_desc(method)returning(int);
+        :args(int);protection(private)modifier(normal)virtual(no);
+        meth_name::type_def(23)=sym_desc(method)returning(char);
+        :args(char);protection(protected)modifier(normal)virual(no);
+        meth_name::type_def(24)=sym_desc(method)returning(float);
+        :args(float);protection(public)modifier(normal)virtual(no);;",
+        N_LSYM,NIL,NIL,NIL
+@end display
+
+@smallexample
+.stabs "all_methods:Tt21=s1priv_meth::22=##1;:i;0A.;protMeth::23=##2;:c;1A.;
+        pubMeth::24=##12;:f;2A.;;",128,0,0,0
+@end smallexample
+
+@node Method Modifiers
+@section Method Modifiers (@code{const}, @code{volatile}, @code{const volatile})
+
+<< based on a6.C >>
+
+In the class example described above all the methods have the normal
+modifier.  This method modifier information is located just after the
+protection information for the method.  This field has four possible
+character values.  Normal methods use @samp{A}, const methods use
+@samp{B}, volatile methods use @samp{C}, and const volatile methods use
+@samp{D}.  Consider the class definition below:
+
+@example
+class A @{
+public:
+        int ConstMeth (int arg) const @{ return arg; @};
+        char VolatileMeth (char arg) volatile @{ return arg; @};
+        float ConstVolMeth (float arg) const volatile @{return arg; @};
+@};
+@end example
+
+This class is described by the following stab:
+
+@display
+.stabs "class(A):sym_desc(struct)type_def(20)=type_desc(struct)struct_bytes(1)
+        meth_name(ConstMeth)::type_def(21)sym_desc(method)
+        returning(int);:arg(int);protection(public)modifier(const)virtual(no);
+        meth_name(VolatileMeth)::type_def(22)=sym_desc(method)
+        returning(char);:arg(char);protection(public)modifier(volatile)virt(no)
+        meth_name(ConstVolMeth)::type_def(23)=sym_desc(method)
+        returning(float);:arg(float);protection(public)modifer(const volatile)
+        virtual(no);;", @dots{}
+@end display
+
+@example
+.stabs "A:T20=s1ConstMeth::21=##1;:i;2B.;VolatileMeth::22=##2;:c;2C.;
+             ConstVolMeth::23=##12;:f;2D.;;",128,0,0,0
+@end example
+
+@node Virtual Methods
+@section Virtual Methods
+
+<< The following examples are based on a4.C >>
+
+The presence of virtual methods in a class definition adds additional
+data to the class description.  The extra data is appended to the
+description of the virtual method and to the end of the class
+description.  Consider the class definition below:
+
+@example
+class A @{
+public:
+        int Adat;
+        virtual int A_virt (int arg) @{ return arg; @};
+@};
+@end example
+
+This results in the stab below describing class A.  It defines a new
+type (20) which is an 8 byte structure.  The first field of the class
+struct is @samp{Adat}, an integer, starting at structure offset 0 and
+occupying 32 bits.
+
+The second field in the class struct is not explicitly defined by the
+C++ class definition but is implied by the fact that the class
+contains a virtual method.  This field is the vtable pointer.  The
+name of the vtable pointer field starts with @samp{$vf} and continues with a
+type reference to the class it is part of.  In this example the type
+reference for class A is 20 so the name of its vtable pointer field is
+@samp{$vf20}, followed by the usual colon.
+
+Next there is a type definition for the vtable pointer type (21).
+This is in turn defined as a pointer to another new type (22).
+
+Type 22 is the vtable itself, which is defined as an array, indexed by
+a range of integers between 0 and 1, and whose elements are of type
+17.  Type 17 was the vtable record type defined by the boilerplate C++
+type definitions, as shown earlier.
+
+The bit offset of the vtable pointer field is 32.  The number of bits
+in the field are not specified when the field is a vtable pointer.
+
+Next is the method definition for the virtual member function @code{A_virt}.
+Its description starts out using the same format as the non-virtual
+member functions described above, except instead of a dot after the
+@samp{A} there is an asterisk, indicating that the function is virtual.
+Since is is virtual some addition information is appended to the end
+of the method description.
+
+The first number represents the vtable index of the method.  This is a
+32 bit unsigned number with the high bit set, followed by a
+semi-colon.
+
+The second number is a type reference to the first base class in the
+inheritence hierarchy defining the virtual member function.  In this
+case the class stab describes a base class so the virtual function is
+not overriding any other definition of the method.  Therefore the
+reference is to the type number of the class that the stab is
+describing (20).
+
+This is followed by three semi-colons.  One marks the end of the
+current sub-section, one marks the end of the method field, and the
+third marks the end of the struct definition.
+
+For classes containing virtual functions the very last section of the
+string part of the stab holds a type reference to the first base
+class.  This is preceeded by @samp{~%} and followed by a final semi-colon.
+
+@display
+.stabs "class_name(A):type_def(20)=sym_desc(struct)struct_bytes(8)
+        field_name(Adat):type_ref(int),bit_offset(0),field_bits(32);
+        field_name(A virt func ptr):type_def(21)=type_desc(ptr to)type_def(22)=
+        sym_desc(array)index_type_ref(range of int from 0 to 1);
+        elem_type_ref(vtbl elem type),
+        bit_offset(32);
+        meth_name(A_virt)::typedef(23)=sym_desc(method)returning(int);
+        :arg_type(int),protection(public)normal(yes)virtual(yes)
+        vtable_index(1);class_first_defining(A);;;~%first_base(A);",
+        N_LSYM,NIL,NIL,NIL
+@end display
+
+@c FIXME: bogus line break.
+@example
+.stabs "A:t20=s8Adat:1,0,32;$vf20:21=*22=ar1;0;1;17,32;
+        A_virt::23=##1;:i;2A*-2147483647;20;;;~%20;",128,0,0,0
+@end example
+
+@node Inheritence
+@section Inheritence
+
+Stabs describing C++ derived classes include additional sections that
+describe the inheritence hierarchy of the class.  A derived class stab
+also encodes the number of base classes.  For each base class it tells
+if the base class is virtual or not, and if the inheritence is private
+or public.  It also gives the offset into the object of the portion of
+the object corresponding to each base class.
+
+This additional information is embeded in the class stab following the
+number of bytes in the struct.  First the number of base classes
+appears bracketed by an exclamation point and a comma.
+
+Then for each base type there repeats a series: a virtual character, a
+visibilty character, a number, a comma, another number, and a
+semi-colon.
+
+The virtual character is @samp{1} if the base class is virtual and
+@samp{0} if not.  The visibility character is @samp{2} if the derivation
+is public, @samp{1} if it is protected, and @samp{0} if it is private.
+Debuggers should ignore virtual or visibility characters they do not
+recognize, and assume a reasonable default (such as public and
+non-virtual) (GDB 4.11 does not, but this should be fixed in the next
+GDB release).
+
+The number following the virtual and visibility characters is the offset
+from the start of the object to the part of the object pertaining to the
+base class.
+
+After the comma, the second number is a type_descriptor for the base
+type.  Finally a semi-colon ends the series, which repeats for each
+base class.
+
+The source below defines three base classes @code{A}, @code{B}, and
+@code{C} and the derived class @code{D}.
+
+
+@example
+class A @{
+public:
+        int Adat;
+        virtual int A_virt (int arg) @{ return arg; @};
+@};
+
+class B @{
+public:
+        int B_dat;
+        virtual int B_virt (int arg) @{return arg; @};
+@};
+
+class C @{
+public:
+        int Cdat;
+        virtual int C_virt (int arg) @{return arg; @};
+@};
+
+class D : A, virtual B, public C @{
+public:
+        int Ddat;
+        virtual int A_virt (int arg ) @{ return arg+1; @};
+        virtual int B_virt (int arg)  @{ return arg+2; @};
+        virtual int C_virt (int arg)  @{ return arg+3; @};
+        virtual int D_virt (int arg)  @{ return arg; @};
+@};
+@end example
+
+Class stabs similar to the ones described earlier are generated for
+each base class.
+
+@c FIXME!!! the linebreaks in the following example probably make the
+@c examples literally unusable, but I don't know any other way to get
+@c them on the page.
+@c One solution would be to put some of the type definitions into
+@c separate stabs, even if that's not exactly what the compiler actually
+@c emits.
+@smallexample
+.stabs "A:T20=s8Adat:1,0,32;$vf20:21=*22=ar1;0;1;17,32;
+        A_virt::23=##1;:i;2A*-2147483647;20;;;~%20;",128,0,0,0
+
+.stabs "B:Tt25=s8Bdat:1,0,32;$vf25:21,32;B_virt::26=##1;
+        :i;2A*-2147483647;25;;;~%25;",128,0,0,0
+
+.stabs "C:Tt28=s8Cdat:1,0,32;$vf28:21,32;C_virt::29=##1;
+        :i;2A*-2147483647;28;;;~%28;",128,0,0,0
+@end smallexample
+
+In the stab describing derived class @code{D} below, the information about
+the derivation of this class is encoded as follows.
+
+@display
+.stabs "derived_class_name:symbol_descriptors(struct tag&type)=
+        type_descriptor(struct)struct_bytes(32)!num_bases(3),
+        base_virtual(no)inheritence_public(no)base_offset(0),
+        base_class_type_ref(A);
+        base_virtual(yes)inheritence_public(no)base_offset(NIL),
+        base_class_type_ref(B);
+        base_virtual(no)inheritence_public(yes)base_offset(64),
+        base_class_type_ref(C); @dots{}
+@end display
+
+@c FIXME! fake linebreaks.
+@smallexample
+.stabs "D:Tt31=s32!3,000,20;100,25;0264,28;$vb25:24,128;Ddat:
+        1,160,32;A_virt::32=##1;:i;2A*-2147483647;20;;B_virt:
+        :32:i;2A*-2147483647;25;;C_virt::32:i;2A*-2147483647;
+        28;;D_virt::32:i;2A*-2147483646;31;;;~%20;",128,0,0,0
+@end smallexample
+
+@node Virtual Base Classes
+@section Virtual Base Classes
+
+A derived class object consists of a concatination in memory of the data
+areas defined by each base class, starting with the leftmost and ending
+with the rightmost in the list of base classes.  The exception to this
+rule is for virtual inheritence.  In the example above, class @code{D}
+inherits virtually from base class @code{B}.  This means that an
+instance of a @code{D} object will not contain its own @code{B} part but
+merely a pointer to a @code{B} part, known as a virtual base pointer.
+
+In a derived class stab, the base offset part of the derivation
+information, described above, shows how the base class parts are
+ordered.  The base offset for a virtual base class is always given as 0.
+Notice that the base offset for @code{B} is given as 0 even though
+@code{B} is not the first base class.  The first base class @code{A}
+starts at offset 0.
+
+The field information part of the stab for class @code{D} describes the field
+which is the pointer to the virtual base class @code{B}. The vbase pointer
+name is @samp{$vb} followed by a type reference to the virtual base class.
+Since the type id for @code{B} in this example is 25, the vbase pointer name
+is @samp{$vb25}.
+
+@c FIXME!! fake linebreaks below
+@smallexample
+.stabs "D:Tt31=s32!3,000,20;100,25;0264,28;$vb25:24,128;Ddat:1,
+       160,32;A_virt::32=##1;:i;2A*-2147483647;20;;B_virt::32:i;
+       2A*-2147483647;25;;C_virt::32:i;2A*-2147483647;28;;D_virt:
+       :32:i;2A*-2147483646;31;;;~%20;",128,0,0,0
+@end smallexample
+
+Following the name and a semicolon is a type reference describing the
+type of the virtual base class pointer, in this case 24.  Type 24 was
+defined earlier as the type of the @code{B} class @code{this} pointer.  The
+@code{this} pointer for a class is a pointer to the class type.
+
+@example
+.stabs "this:P24=*25=xsB:",64,0,0,8
+@end example
+
+Finally the field offset part of the vbase pointer field description
+shows that the vbase pointer is the first field in the @code{D} object,
+before any data fields defined by the class.  The layout of a @code{D}
+class object is a follows, @code{Adat} at 0, the vtable pointer for
+@code{A} at 32, @code{Cdat} at 64, the vtable pointer for C at 96, the
+virtual base pointer for @code{B} at 128, and @code{Ddat} at 160.
+
+
+@node Static Members
+@section Static Members
+
+The data area for a class is a concatenation of the space used by the
+data members of the class.  If the class has virtual methods, a vtable
+pointer follows the class data.  The field offset part of each field
+description in the class stab shows this ordering.
+
+<< How is this reflected in stabs?  See Cygnus bug #677 for some info.  >>
+
+@node Stab Types
+@appendix Table of Stab Types
+
+The following are all the possible values for the stab type field, for
+a.out files, in numeric order.  This does not apply to XCOFF, but
+it does apply to stabs in sections (@pxref{Stab Sections}).  Stabs in
+ECOFF use these values but add 0x8f300 to distinguish them from non-stab
+symbols.
+
+The symbolic names are defined in the file @file{include/aout/stabs.def}.
+
+@menu
+* Non-Stab Symbol Types::	Types from 0 to 0x1f
+* Stab Symbol Types::		Types from 0x20 to 0xff
+@end menu
+
+@node Non-Stab Symbol Types
+@appendixsec Non-Stab Symbol Types
+
+The following types are used by the linker and assembler, not by stab
+directives.  Since this document does not attempt to describe aspects of
+object file format other than the debugging format, no details are
+given.
+
+@c Try to get most of these to fit on a single line.
+@iftex
+@tableindent=1.5in
+@end iftex
+
+@table @code
+@item 0x0     N_UNDF
+Undefined symbol
+
+@item 0x2     N_ABS
+File scope absolute symbol
+
+@item 0x3     N_ABS | N_EXT
+External absolute symbol
+
+@item 0x4     N_TEXT
+File scope text symbol
+
+@item 0x5     N_TEXT | N_EXT
+External text symbol
+
+@item 0x6     N_DATA
+File scope data symbol
+
+@item 0x7     N_DATA | N_EXT
+External data symbol
+
+@item 0x8     N_BSS
+File scope BSS symbol
+
+@item 0x9     N_BSS | N_EXT
+External BSS symbol
+
+@item 0x0c    N_FN_SEQ
+Same as @code{N_FN}, for Sequent compilers
+
+@item 0x0a    N_INDR
+Symbol is indirected to another symbol
+
+@item 0x12    N_COMM
+Common---visible after shared library dynamic link
+
+@item 0x14 N_SETA
+@itemx 0x15 N_SETA | N_EXT
+Absolute set element
+
+@item 0x16 N_SETT
+@itemx 0x17 N_SETT | N_EXT
+Text segment set element
+
+@item 0x18 N_SETD
+@itemx 0x19 N_SETD | N_EXT
+Data segment set element
+
+@item 0x1a N_SETB
+@itemx 0x1b N_SETB | N_EXT
+BSS segment set element
+
+@item 0x1c N_SETV
+@itemx 0x1d N_SETV | N_EXT
+Pointer to set vector
+
+@item 0x1e N_WARNING
+Print a warning message during linking
+
+@item 0x1f    N_FN
+File name of a @file{.o} file
+@end table
+
+@node Stab Symbol Types
+@appendixsec Stab Symbol Types
+
+The following symbol types indicate that this is a stab.  This is the
+full list of stab numbers, including stab types that are used in
+languages other than C.
+
+@table @code
+@item 0x20     N_GSYM
+Global symbol; see @ref{Global Variables}.
+
+@item 0x22     N_FNAME
+Function name (for BSD Fortran); see @ref{Procedures}.
+
+@item 0x24     N_FUN
+Function name (@pxref{Procedures}) or text segment variable
+(@pxref{Statics}).
+
+@item 0x26 N_STSYM
+Data segment file-scope variable; see @ref{Statics}.
+
+@item 0x28 N_LCSYM
+BSS segment file-scope variable; see @ref{Statics}.
+
+@item 0x2a N_MAIN
+Name of main routine; see @ref{Main Program}.
+
+@item 0x2c N_ROSYM
+Variable in @code{.rodata} section; see @ref{Statics}.
+
+@item 0x30     N_PC
+Global symbol (for Pascal); see @ref{N_PC}.
+
+@item 0x32     N_NSYMS
+Number of symbols (according to Ultrix V4.0); see @ref{N_NSYMS}.
+
+@item 0x34     N_NOMAP
+No DST map; see @ref{N_NOMAP}.
+
+@c FIXME: describe this solaris feature in the body of the text (see
+@c comments in include/aout/stab.def).
+@item 0x38 N_OBJ
+Object file (Solaris2).
+
+@c See include/aout/stab.def for (a little) more info.
+@item 0x3c N_OPT
+Debugger options (Solaris2).
+
+@item 0x40     N_RSYM
+Register variable; see @ref{Register Variables}.
+
+@item 0x42     N_M2C
+Modula-2 compilation unit; see @ref{N_M2C}.
+
+@item 0x44     N_SLINE
+Line number in text segment; see @ref{Line Numbers}.
+
+@item 0x46     N_DSLINE
+Line number in data segment; see @ref{Line Numbers}.
+
+@item 0x48     N_BSLINE
+Line number in bss segment; see @ref{Line Numbers}.
+
+@item 0x48     N_BROWS
+Sun source code browser, path to @file{.cb} file; see @ref{N_BROWS}.
+
+@item 0x4a     N_DEFD
+GNU Modula2 definition module dependency; see @ref{N_DEFD}.
+
+@item 0x4c N_FLINE
+Function start/body/end line numbers (Solaris2).
+
+@item 0x50     N_EHDECL
+GNU C++ exception variable; see @ref{N_EHDECL}.
+
+@item 0x50     N_MOD2
+Modula2 info "for imc" (according to Ultrix V4.0); see @ref{N_MOD2}.
+
+@item 0x54     N_CATCH
+GNU C++ @code{catch} clause; see @ref{N_CATCH}.
+
+@item 0x60     N_SSYM
+Structure of union element; see @ref{N_SSYM}.
+
+@item 0x62 N_ENDM
+Last stab for module (Solaris2).
+
+@item 0x64     N_SO
+Path and name of source file; see @ref{Source Files}.
+
+@item 0x80 N_LSYM
+Stack variable (@pxref{Stack Variables}) or type (@pxref{Typedefs}).
+
+@item 0x82     N_BINCL
+Beginning of an include file (Sun only); see @ref{Include Files}.
+
+@item 0x84     N_SOL
+Name of include file; see @ref{Include Files}.
+
+@item 0xa0     N_PSYM
+Parameter variable; see @ref{Parameters}.
+
+@item 0xa2     N_EINCL
+End of an include file; see @ref{Include Files}.
+
+@item 0xa4     N_ENTRY
+Alternate entry point; see @ref{Alternate Entry Points}.
+
+@item 0xc0     N_LBRAC
+Beginning of a lexical block; see @ref{Block Structure}.
+
+@item 0xc2     N_EXCL
+Place holder for a deleted include file; see @ref{Include Files}.
+
+@item 0xc4     N_SCOPE
+Modula2 scope information (Sun linker); see @ref{N_SCOPE}.
+
+@item 0xe0     N_RBRAC
+End of a lexical block; see @ref{Block Structure}.
+
+@item 0xe2     N_BCOMM
+Begin named common block; see @ref{Common Blocks}.
+
+@item 0xe4     N_ECOMM
+End named common block; see @ref{Common Blocks}.
+
+@item 0xe8     N_ECOML
+Member of a common block; see @ref{Common Blocks}.
+
+@c FIXME: How does this really work?  Move it to main body of document.
+@item 0xea N_WITH
+Pascal @code{with} statement: type,,0,0,offset (Solaris2).
+
+@item 0xf0     N_NBTEXT
+Gould non-base registers; see @ref{Gould}.
+
+@item 0xf2     N_NBDATA
+Gould non-base registers; see @ref{Gould}.
+
+@item 0xf4     N_NBBSS
+Gould non-base registers; see @ref{Gould}.
+
+@item 0xf6     N_NBSTS
+Gould non-base registers; see @ref{Gould}.
+
+@item 0xf8     N_NBLCS
+Gould non-base registers; see @ref{Gould}.
+@end table
+
+@c Restore the default table indent
+@iftex
+@tableindent=.8in
+@end iftex
+
+@node Symbol Descriptors
+@appendix Table of Symbol Descriptors
+
+The symbol descriptor is the character which follows the colon in many
+stabs, and which tells what kind of stab it is.  @xref{String Field},
+for more information about their use.
+
+@c Please keep this alphabetical
+@table @code
+@c In TeX, this looks great, digit is in italics.  But makeinfo insists
+@c on putting it in `', not realizing that @var should override @code.
+@c I don't know of any way to make makeinfo do the right thing.  Seems
+@c like a makeinfo bug to me.
+@item @var{digit}
+@itemx (
+@itemx -
+Variable on the stack; see @ref{Stack Variables}.
+
+@item :
+C++ nested symbol; see @xref{Nested Symbols}
+
+@item a
+Parameter passed by reference in register; see @ref{Reference Parameters}.
+
+@item b
+Based variable; see @ref{Based Variables}.
+
+@item c
+Constant; see @ref{Constants}.
+
+@item C
+Conformant array bound (Pascal, maybe other languages); @ref{Conformant
+Arrays}.  Name of a caught exception (GNU C++).  These can be
+distinguished because the latter uses @code{N_CATCH} and the former uses
+another symbol type.
+
+@item d
+Floating point register variable; see @ref{Register Variables}.
+
+@item D
+Parameter in floating point register; see @ref{Register Parameters}.
+
+@item f
+File scope function; see @ref{Procedures}.
+
+@item F
+Global function; see @ref{Procedures}.
+
+@item G
+Global variable; see @ref{Global Variables}.
+
+@item i
+@xref{Register Parameters}.
+
+@item I
+Internal (nested) procedure; see @ref{Nested Procedures}.
+
+@item J
+Internal (nested) function; see @ref{Nested Procedures}.
+
+@item L
+Label name (documented by AIX, no further information known).
+
+@item m
+Module; see @ref{Procedures}.
+
+@item p
+Argument list parameter; see @ref{Parameters}.
+
+@item pP
+@xref{Parameters}.
+
+@item pF
+Fortran Function parameter; see @ref{Parameters}.
+
+@item P
+Unfortunately, three separate meanings have been independently invented
+for this symbol descriptor.  At least the GNU and Sun uses can be
+distinguished by the symbol type.  Global Procedure (AIX) (symbol type
+used unknown); see @ref{Procedures}.  Register parameter (GNU) (symbol
+type @code{N_PSYM}); see @ref{Parameters}.  Prototype of function
+referenced by this file (Sun @code{acc}) (symbol type @code{N_FUN}).
+
+@item Q
+Static Procedure; see @ref{Procedures}.
+
+@item R
+Register parameter; see @ref{Register Parameters}.
+
+@item r
+Register variable; see @ref{Register Variables}.
+
+@item S
+File scope variable; see @ref{Statics}.
+
+@item s
+Local variable (OS9000).
+
+@item t
+Type name; see @ref{Typedefs}.
+
+@item T
+Enumeration, structure, or union tag; see @ref{Typedefs}.
+
+@item v
+Parameter passed by reference; see @ref{Reference Parameters}.
+
+@item V
+Procedure scope static variable; see @ref{Statics}.
+
+@item x
+Conformant array; see @ref{Conformant Arrays}.
+
+@item X
+Function return variable; see @ref{Parameters}.
+@end table
+
+@node Type Descriptors
+@appendix Table of Type Descriptors
+
+The type descriptor is the character which follows the type number and
+an equals sign.  It specifies what kind of type is being defined.
+@xref{String Field}, for more information about their use.
+
+@table @code
+@item @var{digit}
+@itemx (
+Type reference; see @ref{String Field}.
+
+@item -
+Reference to builtin type; see @ref{Negative Type Numbers}.
+
+@item #
+Method (C++); see @ref{Method Type Descriptor}.
+
+@item *
+Pointer; see @ref{Miscellaneous Types}.
+
+@item &
+Reference (C++).
+
+@item @@
+Type Attributes (AIX); see @ref{String Field}.  Member (class and variable)
+type (GNU C++); see @ref{Member Type Descriptor}.
+
+@item a
+Array; see @ref{Arrays}.
+
+@item A
+Open array; see @ref{Arrays}.
+
+@item b
+Pascal space type (AIX); see @ref{Miscellaneous Types}.  Builtin integer
+type (Sun); see @ref{Builtin Type Descriptors}.  Const and volatile
+qualfied type (OS9000).
+
+@item B
+Volatile-qualified type; see @ref{Miscellaneous Types}.
+
+@item c
+Complex builtin type (AIX); see @ref{Builtin Type Descriptors}.
+Const-qualified type (OS9000).
+
+@item C
+COBOL Picture type.  See AIX documentation for details.
+
+@item d
+File type; see @ref{Miscellaneous Types}.
+
+@item D
+N-dimensional dynamic array; see @ref{Arrays}.
+
+@item e
+Enumeration type; see @ref{Enumerations}.
+
+@item E
+N-dimensional subarray; see @ref{Arrays}.
+
+@item f
+Function type; see @ref{Function Types}.
+
+@item F
+Pascal function parameter; see @ref{Function Types}
+
+@item g
+Builtin floating point type; see @ref{Builtin Type Descriptors}.
+
+@item G
+COBOL Group.  See AIX documentation for details.
+
+@item i
+Imported type (AIX); see @ref{Cross-References}.  Volatile-qualified
+type (OS9000).
+
+@item k
+Const-qualified type; see @ref{Miscellaneous Types}.
+
+@item K
+COBOL File Descriptor.  See AIX documentation for details.
+
+@item M
+Multiple instance type; see @ref{Miscellaneous Types}.
+
+@item n
+String type; see @ref{Strings}.
+
+@item N
+Stringptr; see @ref{Strings}.
+
+@item o
+Opaque type; see @ref{Typedefs}.
+
+@item p
+Procedure; see @ref{Function Types}.
+
+@item P
+Packed array; see @ref{Arrays}.
+
+@item r
+Range type; see @ref{Subranges}.
+
+@item R
+Builtin floating type; see @ref{Builtin Type Descriptors} (Sun).  Pascal
+subroutine parameter; see @ref{Function Types} (AIX).  Detecting this
+conflict is possible with careful parsing (hint: a Pascal subroutine
+parameter type will always contain a comma, and a builtin type
+descriptor never will).
+
+@item s
+Structure type; see @ref{Structures}.
+
+@item S
+Set type; see @ref{Miscellaneous Types}.
+
+@item u
+Union; see @ref{Unions}.
+
+@item v
+Variant record.  This is a Pascal and Modula-2 feature which is like a
+union within a struct in C.  See AIX documentation for details.
+
+@item w
+Wide character; see @ref{Builtin Type Descriptors}.
+
+@item x
+Cross-reference; see @ref{Cross-References}.
+
+@item Y
+Used by IBM's xlC C++ compiler (for structures, I think).
+
+@item z
+gstring; see @ref{Strings}.
+@end table
+
+@node Expanded Reference
+@appendix Expanded Reference by Stab Type
+
+@c FIXME: This appendix should go away; see N_PSYM or N_SO for an example.
+
+For a full list of stab types, and cross-references to where they are
+described, see @ref{Stab Types}.  This appendix just covers certain
+stabs which are not yet described in the main body of this document;
+eventually the information will all be in one place.
+
+Format of an entry:
+
+The first line is the symbol type (see @file{include/aout/stab.def}).
+
+The second line describes the language constructs the symbol type
+represents.
+
+The third line is the stab format with the significant stab fields
+named and the rest NIL.
+
+Subsequent lines expand upon the meaning and possible values for each
+significant stab field.
+
+Finally, any further information.
+
+@menu
+* N_PC::			Pascal global symbol
+* N_NSYMS::			Number of symbols
+* N_NOMAP::			No DST map
+* N_M2C::			Modula-2 compilation unit
+* N_BROWS::			Path to .cb file for Sun source code browser
+* N_DEFD::			GNU Modula2 definition module dependency
+* N_EHDECL::			GNU C++ exception variable
+* N_MOD2::			Modula2 information "for imc"
+* N_CATCH::			GNU C++ "catch" clause
+* N_SSYM::			Structure or union element
+* N_SCOPE::			Modula2 scope information (Sun only)
+* Gould::			non-base register symbols used on Gould systems
+* N_LENG::			Length of preceding entry
+@end menu
+
+@node N_PC
+@section N_PC
+
+@deffn @code{.stabs} N_PC
+@findex N_PC
+Global symbol (for Pascal).
+
+@example
+"name" -> "symbol_name"  <<?>>
+value  -> supposedly the line number (stab.def is skeptical)
+@end example
+
+@display
+@file{stabdump.c} says:
+
+global pascal symbol: name,,0,subtype,line
+<< subtype? >>
+@end display
+@end deffn
+
+@node N_NSYMS
+@section N_NSYMS
+
+@deffn @code{.stabn} N_NSYMS
+@findex N_NSYMS
+Number of symbols (according to Ultrix V4.0).
+
+@display
+        0, files,,funcs,lines (stab.def)
+@end display
+@end deffn
+
+@node N_NOMAP
+@section N_NOMAP
+
+@deffn @code{.stabs} N_NOMAP
+@findex N_NOMAP
+No DST map for symbol (according to Ultrix V4.0).  I think this means a
+variable has been optimized out.
+
+@display
+        name, ,0,type,ignored (stab.def)
+@end display
+@end deffn
+
+@node N_M2C
+@section N_M2C
+
+@deffn @code{.stabs} N_M2C
+@findex N_M2C
+Modula-2 compilation unit.
+
+@example
+"string" -> "unit_name,unit_time_stamp[,code_time_stamp]"
+desc   -> unit_number
+value  -> 0 (main unit)
+          1 (any other unit)
+@end example
+
+See @cite{Dbx and Dbxtool Interfaces}, 2nd edition, by Sun, 1988, for
+more information.
+
+@end deffn
+
+@node N_BROWS
+@section N_BROWS
+
+@deffn @code{.stabs} N_BROWS
+@findex N_BROWS
+Sun source code browser, path to @file{.cb} file
+
+<<?>>
+"path to associated @file{.cb} file"
+
+Note: N_BROWS has the same value as N_BSLINE.
+@end deffn
+
+@node N_DEFD
+@section N_DEFD
+
+@deffn @code{.stabn} N_DEFD
+@findex N_DEFD
+GNU Modula2 definition module dependency.
+
+GNU Modula-2 definition module dependency.  The value is the
+modification time of the definition file.  The other field is non-zero
+if it is imported with the GNU M2 keyword @code{%INITIALIZE}.  Perhaps
+@code{N_M2C} can be used if there are enough empty fields?
+@end deffn
+
+@node N_EHDECL
+@section N_EHDECL
+
+@deffn @code{.stabs} N_EHDECL
+@findex N_EHDECL
+GNU C++ exception variable <<?>>.
+
+"@var{string} is variable name"
+
+Note: conflicts with @code{N_MOD2}.
+@end deffn
+
+@node N_MOD2
+@section N_MOD2
+
+@deffn @code{.stab?} N_MOD2
+@findex N_MOD2
+Modula2 info "for imc" (according to Ultrix V4.0)
+
+Note: conflicts with @code{N_EHDECL}  <<?>>
+@end deffn
+
+@node N_CATCH
+@section N_CATCH
+
+@deffn @code{.stabn} N_CATCH
+@findex N_CATCH
+GNU C++ @code{catch} clause
+
+GNU C++ @code{catch} clause.  The value is its address.  The desc field
+is nonzero if this entry is immediately followed by a @code{CAUGHT} stab
+saying what exception was caught.  Multiple @code{CAUGHT} stabs means
+that multiple exceptions can be caught here.  If desc is 0, it means all
+exceptions are caught here.
+@end deffn
+
+@node N_SSYM
+@section N_SSYM
+
+@deffn @code{.stabn} N_SSYM
+@findex N_SSYM
+Structure or union element.
+
+The value is the offset in the structure.
+
+<<?looking at structs and unions in C I didn't see these>>
+@end deffn
+
+@node N_SCOPE
+@section N_SCOPE
+
+@deffn @code{.stab?} N_SCOPE
+@findex N_SCOPE
+Modula2 scope information (Sun linker)
+<<?>>
+@end deffn
+
+@node Gould
+@section Non-base registers on Gould systems
+
+@deffn @code{.stab?} N_NBTEXT
+@deffnx @code{.stab?} N_NBDATA
+@deffnx @code{.stab?} N_NBBSS
+@deffnx @code{.stab?} N_NBSTS
+@deffnx @code{.stab?} N_NBLCS
+@findex N_NBTEXT
+@findex N_NBDATA
+@findex N_NBBSS
+@findex N_NBSTS
+@findex N_NBLCS
+These are used on Gould systems for non-base registers syms.
+
+However, the following values are not the values used by Gould; they are
+the values which GNU has been documenting for these values for a long
+time, without actually checking what Gould uses.  I include these values
+only because perhaps some someone actually did something with the GNU
+information (I hope not, why GNU knowingly assigned wrong values to
+these in the header file is a complete mystery to me).
+
+@example
+240    0xf0     N_NBTEXT  ??
+242    0xf2     N_NBDATA  ??
+244    0xf4     N_NBBSS   ??
+246    0xf6     N_NBSTS   ??
+248    0xf8     N_NBLCS   ??
+@end example
+@end deffn
+
+@node N_LENG
+@section N_LENG
+
+@deffn @code{.stabn} N_LENG
+@findex N_LENG
+Second symbol entry containing a length-value for the preceding entry.
+The value is the length.
+@end deffn
+
+@node Questions
+@appendix Questions and Anomalies
+
+@itemize @bullet
+@item
+@c I think this is changed in GCC 2.4.5 to put the line number there.
+For GNU C stabs defining local and global variables (@code{N_LSYM} and
+@code{N_GSYM}), the desc field is supposed to contain the source
+line number on which the variable is defined.  In reality the desc
+field is always 0.  (This behavior is defined in @file{dbxout.c} and
+putting a line number in desc is controlled by @samp{#ifdef
+WINNING_GDB}, which defaults to false). GDB supposedly uses this
+information if you say @samp{list @var{var}}.  In reality, @var{var} can
+be a variable defined in the program and GDB says @samp{function
+@var{var} not defined}.
+
+@item
+In GNU C stabs, there seems to be no way to differentiate tag types:
+structures, unions, and enums (symbol descriptor @samp{T}) and typedefs
+(symbol descriptor @samp{t}) defined at file scope from types defined locally
+to a procedure or other more local scope.  They all use the @code{N_LSYM}
+stab type.  Types defined at procedure scope are emited after the
+@code{N_RBRAC} of the preceding function and before the code of the
+procedure in which they are defined.  This is exactly the same as
+types defined in the source file between the two procedure bodies.
+GDB overcompensates by placing all types in block #1, the block for
+symbols of file scope.  This is true for default, @samp{-ansi} and
+@samp{-traditional} compiler options. (Bugs gcc/1063, gdb/1066.)
+
+@item
+What ends the procedure scope?  Is it the proc block's @code{N_RBRAC} or the
+next @code{N_FUN}?  (I believe its the first.)
+@end itemize
+
+@node Stab Sections
+@appendix Using Stabs in Their Own Sections
+
+Many object file formats allow tools to create object files with custom
+sections containing any arbitrary data.  For any such object file
+format, stabs can be embedded in special sections.  This is how stabs
+are used with ELF and SOM, and aside from ECOFF and XCOFF, is how stabs
+are used with COFF.
+
+@menu
+* Stab Section Basics::    How to embed stabs in sections
+* ELF Linker Relocation::  Sun ELF hacks
+@end menu
+
+@node Stab Section Basics
+@appendixsec How to Embed Stabs in Sections
+
+The assembler creates two custom sections, a section named @code{.stab}
+which contains an array of fixed length structures, one struct per stab,
+and a section named @code{.stabstr} containing all the variable length
+strings that are referenced by stabs in the @code{.stab} section.  The
+byte order of the stabs binary data depends on the object file format.
+For ELF, it matches the byte order of the ELF file itself, as determined
+from the @code{EI_DATA} field in the @code{e_ident} member of the ELF
+header.  For SOM, it is always big-endian (is this true??? FIXME).  For
+COFF, it matches the byte order of the COFF headers.  The meaning of the
+fields is the same as for a.out (@pxref{Symbol Table Format}), except
+that the @code{n_strx} field is relative to the strings for the current
+compilation unit (which can be found using the synthetic N_UNDF stab
+described below), rather than the entire string table.
+
+The first stab in the @code{.stab} section for each compilation unit is
+synthetic, generated entirely by the assembler, with no corresponding
+@code{.stab} directive as input to the assembler.  This stab contains
+the following fields:
+
+@table @code
+@item n_strx
+Offset in the @code{.stabstr} section to the source filename.
+
+@item n_type
+@code{N_UNDF}.
+
+@item n_other
+Unused field, always zero.
+This may eventually be used to hold overflows from the count in
+the @code{n_desc} field.
+
+@item n_desc
+Count of upcoming symbols, i.e., the number of remaining stabs for this
+source file.
+
+@item n_value
+Size of the string table fragment associated with this source file, in
+bytes.
+@end table
+
+The @code{.stabstr} section always starts with a null byte (so that string
+offsets of zero reference a null string), followed by random length strings,
+each of which is null byte terminated.
+
+The ELF section header for the @code{.stab} section has its
+@code{sh_link} member set to the section number of the @code{.stabstr}
+section, and the @code{.stabstr} section has its ELF section
+header @code{sh_type} member set to @code{SHT_STRTAB} to mark it as a
+string table.  SOM and COFF have no way of linking the sections together
+or marking them as string tables.
+
+For COFF, the @code{.stab} and @code{.stabstr} sections may be simply
+concatenated by the linker.  GDB then uses the @code{n_desc} fields to
+figure out the extent of the original sections.  Similarly, the
+@code{n_value} fields of the header symbols are added together in order
+to get the actual position of the strings in a desired @code{.stabstr}
+section.  Although this design obviates any need for the linker to
+relocate or otherwise manipulate @code{.stab} and @code{.stabstr}
+sections, it also requires some care to ensure that the offsets are
+calculated correctly.  For instance, if the linker were to pad in
+between the @code{.stabstr} sections before concatenating, then the
+offsets to strings in the middle of the executable's @code{.stabstr}
+section would be wrong.
+
+The GNU linker is able to optimize stabs information by merging
+duplicate strings and removing duplicate header file information
+(@pxref{Include Files}).  When some versions of the GNU linker optimize
+stabs in sections, they remove the leading @code{N_UNDF} symbol and
+arranges for all the @code{n_strx} fields to be relative to the start of
+the @code{.stabstr} section.
+
+@node ELF Linker Relocation
+@appendixsec Having the Linker Relocate Stabs in ELF 
+
+This section describes some Sun hacks for Stabs in ELF; it does not
+apply to COFF or SOM.
+
+To keep linking fast, you don't want the linker to have to relocate very
+many stabs.  Making sure this is done for @code{N_SLINE},
+@code{N_RBRAC}, and @code{N_LBRAC} stabs is the most important thing
+(see the descriptions of those stabs for more information).  But Sun's
+stabs in ELF has taken this further, to make all addresses in the
+@code{n_value} field (functions and static variables) relative to the
+source file.  For the @code{N_SO} symbol itself, Sun simply omits the
+address.  To find the address of each section corresponding to a given
+source file, the compiler puts out symbols giving the address of each
+section for a given source file.  Since these are ELF (not stab)
+symbols, the linker relocates them correctly without having to touch the
+stabs section.  They are named @code{Bbss.bss} for the bss section,
+@code{Ddata.data} for the data section, and @code{Drodata.rodata} for
+the rodata section.  For the text section, there is no such symbol (but
+there should be, see below).  For an example of how these symbols work,
+@xref{Stab Section Transformations}.  GCC does not provide these symbols;
+it instead relies on the stabs getting relocated.  Thus addresses which
+would normally be relative to @code{Bbss.bss}, etc., are already
+relocated.  The Sun linker provided with Solaris 2.2 and earlier
+relocates stabs using normal ELF relocation information, as it would do
+for any section.  Sun has been threatening to kludge their linker to not
+do this (to speed up linking), even though the correct way to avoid
+having the linker do these relocations is to have the compiler no longer
+output relocatable values.  Last I heard they had been talked out of the
+linker kludge.  See Sun point patch 101052-01 and Sun bug 1142109.  With
+the Sun compiler this affects @samp{S} symbol descriptor stabs
+(@pxref{Statics}) and functions (@pxref{Procedures}).  In the latter
+case, to adopt the clean solution (making the value of the stab relative
+to the start of the compilation unit), it would be necessary to invent a
+@code{Ttext.text} symbol, analogous to the @code{Bbss.bss}, etc.,
+symbols.  I recommend this rather than using a zero value and getting
+the address from the ELF symbols.
+
+Finding the correct @code{Bbss.bss}, etc., symbol is difficult, because
+the linker simply concatenates the @code{.stab} sections from each
+@file{.o} file without including any information about which part of a
+@code{.stab} section comes from which @file{.o} file.  The way GDB does
+this is to look for an ELF @code{STT_FILE} symbol which has the same
+name as the last component of the file name from the @code{N_SO} symbol
+in the stabs (for example, if the file name is @file{../../gdb/main.c},
+it looks for an ELF @code{STT_FILE} symbol named @code{main.c}).  This
+loses if different files have the same name (they could be in different
+directories, a library could have been copied from one system to
+another, etc.).  It would be much cleaner to have the @code{Bbss.bss}
+symbols in the stabs themselves.  Having the linker relocate them there
+is no more work than having the linker relocate ELF symbols, and it
+solves the problem of having to associate the ELF and stab symbols.
+However, no one has yet designed or implemented such a scheme.
+
+@node Symbol Types Index
+@unnumbered Symbol Types Index
+
+@printindex fn
+
+@contents
+@bye
diff --git a/gdb/dpx2-nat.c b/gdb/dpx2-nat.c
new file mode 100644
index 0000000..21dc135
--- /dev/null
+++ b/gdb/dpx2-nat.c
@@ -0,0 +1,83 @@
+/* DPX2 host interface.
+   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+
+#include "gdb_string.h"
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/user.h>
+#include <sys/reg.h>
+#include <sys/utsname.h>
+
+
+/* this table must line up with REGISTER_NAMES in tm-68k.h */
+/* symbols like 'A0' come from <sys/reg.h> */
+static int regmap[] = 
+{
+  R0, R1, R2, R3, R4, R5, R6, R7,
+  A0, A1, A2, A3, A4, A5, A6, SP,
+  PS, PC,
+  FP0, FP1, FP2, FP3, FP4, FP5, FP6, FP7,
+  FP_CR, FP_SR, FP_IAR
+};
+
+/* blockend is the value of u.u_ar0, and points to the
+ * place where D0 is stored
+ */
+
+int
+dpx2_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+  if (regnum < FP0_REGNUM)
+    return (blockend + 4 * regmap[regnum]);
+  else
+    return (int) &(((struct user *)0)->u_fpstate[regmap[regnum]]);
+}
+
+/* This is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.
+   Unfortunately this is not provided in the system header files.
+   To make matters worse, this value also differs between
+   the dpx/2200 and dpx/2300 models and nlist is not available on the dpx2.
+   We use utsname() to decide on which model we are running.
+   FIXME: This breaks cross examination of core files (it would not be hard
+   to check whether u.u_ar0 is between 0x7fff5000 and 0x7fffc000 and if so
+   use 0x7fff5000 and if not use 0x7fffc000.  FIXME).  */
+
+#define KERNEL_U_ADDR_200 0x7fff5000
+#define KERNEL_U_ADDR_300 0x7fffc000
+
+CORE_ADDR kernel_u_addr;
+
+void
+_initialize_dpx2_nat ()
+{
+  struct utsname uts;
+
+  if (uname (&uts) == 0 && strcmp (uts.machine, "DPX/2200") == 0)
+    kernel_u_addr = KERNEL_U_ADDR_200;
+  else
+    kernel_u_addr = KERNEL_U_ADDR_300;
+}
diff --git a/gdb/dsrec.c b/gdb/dsrec.c
new file mode 100644
index 0000000..06c2929
--- /dev/null
+++ b/gdb/dsrec.c
@@ -0,0 +1,312 @@
+/* S-record download support for GDB, the GNU debugger.
+   Copyright 1995, 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+#include "srec.h"
+#include <time.h>
+
+int (*ui_load_progress_hook) PARAMS ((char *, unsigned long));
+extern void report_transfer_performance PARAMS ((unsigned long, time_t, time_t));
+
+extern int remote_debug;
+
+static int make_srec PARAMS ((char *srec, CORE_ADDR targ_addr, bfd *abfd,
+			      asection *sect, int sectoff, int *maxrecsize,
+			      int flags));
+
+/* Download an executable by converting it to S records.  DESC is a
+    serial_t to send the data to.  FILE is the name of the file to be
+    loaded.  LOAD_OFFSET is the offset into memory to load data into.
+    It is usually specified by the user and is useful with the a.out
+    file format.  MAXRECSIZE is the length in chars of the largest
+    S-record the host can accomodate.  This is measured from the
+    starting `S' to the last char of the checksum.  FLAGS is various
+    random flags, and HASHMARK is non-zero to cause a `#' to be
+    printed out for each record loaded.  WAITACK, if non-NULL, is a
+    function that waits for an acknowledgement after each S-record,
+    and returns non-zero if the ack is read correctly.  */
+
+void
+load_srec (desc, file, load_offset, maxrecsize, flags, hashmark, waitack)
+     serial_t desc;
+     const char *file;
+     bfd_vma load_offset;
+     int maxrecsize;
+     int flags;
+     int hashmark;
+     int (*waitack) PARAMS ((void));
+{
+  bfd *abfd;
+  asection *s;
+  char *srec;
+  int i;
+  int reclen;
+  time_t start_time, end_time;
+  unsigned long data_count = 0;
+
+  srec = (char *) alloca (maxrecsize + 1);
+
+  abfd = bfd_openr (file, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", file);
+      return;
+    }
+
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+
+  start_time = time (NULL);
+
+  /* Write a type 0 header record. no data for a type 0, and there
+     is no data, so len is 0.  */
+
+  reclen = maxrecsize;
+  make_srec (srec, 0, NULL, (asection *)1, 0, &reclen, flags);
+  if (remote_debug)
+    {
+      srec[reclen] = '\0';
+      puts_debug ("sent -->", srec, "<--");
+    }
+  SERIAL_WRITE (desc, srec, reclen);
+
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	int numbytes;
+	bfd_vma addr = bfd_get_section_vma (abfd, s) + load_offset;
+	bfd_size_type size = bfd_get_section_size_before_reloc (s);
+	char * section_name = (char *)bfd_get_section_name (abfd, s);
+	printf_filtered ("%s\t: 0x%08x .. 0x%08x  ",
+			 section_name, (int) addr, (int) addr + size);
+	gdb_flush (gdb_stdout);
+
+	data_count += size;
+
+	for (i = 0; i < size; i += numbytes)
+	  {
+	    reclen = maxrecsize;
+	    numbytes = make_srec (srec, (CORE_ADDR) (addr + i), abfd, s,
+				  i, &reclen, flags);
+
+	    if (remote_debug)
+	      {
+		srec[reclen] = '\0';
+		puts_debug ("sent -->", srec, "<--");
+	      }
+
+	    /* Repeatedly send the S-record until a good
+	       acknowledgement is sent back.  */
+	    do
+	      {
+	        SERIAL_WRITE (desc, srec, reclen);
+		if (ui_load_progress_hook)
+		  if (ui_load_progress_hook (section_name, (unsigned long) i))
+		    error ("Canceled the download");
+	      }
+	    while (waitack != NULL && !waitack ());
+
+	    if (hashmark)
+	      {
+		putchar_unfiltered ('#');
+		gdb_flush (gdb_stdout);
+	      }
+	  }			/* Per-packet (or S-record) loop */
+
+	if (ui_load_progress_hook)
+	  if (ui_load_progress_hook (section_name, (unsigned long) i))
+	    error ("Canceled the download");
+	putchar_unfiltered ('\n');
+      }
+
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+
+  end_time = time (NULL);
+  
+  /* Write a terminator record.  */
+
+  reclen = maxrecsize;
+  make_srec (srec, abfd->start_address, NULL, NULL, 0, &reclen, flags);
+
+  if (remote_debug)
+    {
+      srec[reclen] = '\0';
+      puts_debug ("sent -->", srec, "<--");
+    }
+
+  SERIAL_WRITE (desc, srec, reclen);
+
+  /* Some monitors need these to wake up properly.  (Which ones? -sts)  */
+  SERIAL_WRITE (desc, "\r\r", 2);
+  if (remote_debug)
+    puts_debug ("sent -->", "\r\r", "<---");
+
+  SERIAL_FLUSH_INPUT (desc);
+
+  report_transfer_performance (data_count, start_time, end_time);
+}
+
+/*
+ * make_srec -- make an srecord. This writes each line, one at a
+ *	time, each with it's own header and trailer line.
+ *	An srecord looks like this:
+ *
+ * byte count-+     address
+ * start ---+ |        |       data        +- checksum
+ *	    | |        |                   |
+ *	  S01000006F6B692D746573742E73726563E4
+ *	  S315000448600000000000000000FC00005900000000E9
+ *	  S31A0004000023C1400037DE00F023604000377B009020825000348D
+ *	  S30B0004485A0000000000004E
+ *	  S70500040000F6
+ *
+ *	S<type><length><address><data><checksum>
+ *
+ *      Where
+ *      - length
+ *        is the number of bytes following upto the checksum. Note that
+ *        this is not the number of chars following, since it takes two
+ *        chars to represent a byte.
+ *      - type
+ *        is one of:
+ *        0) header record
+ *        1) two byte address data record
+ *        2) three byte address data record
+ *        3) four byte address data record
+ *        7) four byte address termination record
+ *        8) three byte address termination record
+ *        9) two byte address termination record
+ *       
+ *      - address
+ *        is the start address of the data following, or in the case of
+ *        a termination record, the start address of the image
+ *      - data
+ *        is the data.
+ *      - checksum
+ *	  is the sum of all the raw byte data in the record, from the length
+ *        upwards, modulo 256 and subtracted from 255.
+ *
+ * This routine returns the length of the S-record.
+ *
+ */
+
+static int
+make_srec (srec, targ_addr, abfd, sect, sectoff, maxrecsize, flags)
+     char *srec;
+     CORE_ADDR targ_addr;
+     bfd *abfd;
+     asection *sect;
+     int sectoff;
+     int *maxrecsize;
+     int flags;
+{
+  unsigned char checksum;
+  int tmp;
+  const static char hextab[] = "0123456789ABCDEF";
+  const static char data_code_table[] = "123";
+  const static char term_code_table[] = "987";
+  const static char header_code_table[] = "000";
+  const static char *formats[] = { "S%c%02X%04X",
+				   "S%c%02X%06X",
+				   "S%c%02X%08X" };
+  char const *code_table;
+  int addr_size;
+  int payload_size;
+  char *binbuf;
+  char *p;
+
+  if (sect)
+    {
+      tmp = flags;		/* Data or header record */
+      code_table = abfd ? data_code_table : header_code_table;
+      binbuf = alloca (*maxrecsize/2);
+    }
+  else
+    {
+      tmp = flags >> SREC_TERM_SHIFT; /* Term record */
+      code_table = term_code_table;
+    }
+
+  if ((tmp & SREC_2_BYTE_ADDR) && (targ_addr <= 0xffff))
+    addr_size = 2;
+  else if ((tmp & SREC_3_BYTE_ADDR) && (targ_addr <= 0xffffff))
+    addr_size = 3;
+  else if (tmp & SREC_4_BYTE_ADDR)
+    addr_size = 4;
+  else
+    fatal ("make_srec:  Bad address (0x%x), or bad flags (0x%x).",
+	   targ_addr, flags);
+
+  /* Now that we know the address size, we can figure out how much
+     data this record can hold.  */
+
+  if (sect && abfd)
+    {
+      payload_size = (*maxrecsize - (1 + 1 + 2 + addr_size * 2 + 2)) / 2;
+      payload_size = min (payload_size, sect->_raw_size - sectoff);
+
+      bfd_get_section_contents (abfd, sect, binbuf, sectoff, payload_size);
+    }
+  else
+    payload_size = 0;		/* Term or header packets have no payload */
+
+  /* Output the header.  */
+
+  sprintf (srec, formats[addr_size - 2], code_table[addr_size - 2],
+	   addr_size + payload_size + 1, (int)targ_addr);
+
+  /* Note that the checksum is calculated on the raw data, not the
+     hexified data.  It includes the length, address and the data
+     portions of the packet.  */
+
+  checksum = 0;
+  
+  checksum += (payload_size + addr_size + 1	/* Packet length */
+	       + (targ_addr & 0xff)		/* Address... */
+	       + ((targ_addr >>  8) & 0xff)
+	       + ((targ_addr >> 16) & 0xff)
+	       + ((targ_addr >> 24) & 0xff));
+  
+  p = srec + 1 + 1 + 2 + addr_size * 2;
+
+  /* Build the Srecord.  */
+  for (tmp = 0; tmp < payload_size; tmp++)
+    {
+      unsigned char k;
+
+      k = binbuf[tmp];
+      *p++ = hextab [k >> 4];
+      *p++ = hextab [k & 0xf];
+      checksum += k;
+    }
+
+  checksum = ~checksum;
+
+  *p++ = hextab[checksum >> 4];
+  *p++ = hextab[checksum & 0xf];
+  *p++ = '\r';
+
+  *maxrecsize = p - srec;
+  return payload_size;
+}
diff --git a/gdb/dst.h b/gdb/dst.h
new file mode 100644
index 0000000..252a3a8
--- /dev/null
+++ b/gdb/dst.h
@@ -0,0 +1,1659 @@
+/* <apollo/dst.h> */
+/* Apollo object module DST (debug symbol table) description */
+
+#ifndef apollo_dst_h
+#define apollo_dst_h 
+
+#if defined(apollo) && !defined(__GNUC__)
+#define ALIGNED1  __attribute( (aligned(1)) )
+#else
+/* Remove attribute directives from non-Apollo code: */
+#define ALIGNED1   /* nil */
+#endif
+
+
+
+/* Identification of this version of the debug symbol table.  Producers of the
+   debug symbol table must write these values into the version number field of
+   the compilation unit record in .blocks .
+*/
+#define dst_version_major    1    
+#define dst_version_minor    3    
+
+
+/*
+** Enumeration of debug record types appearing in .blocks and .symbols ...
+*/
+typedef enum
+    {
+    dst_typ_pad,                   /*  0 */
+    dst_typ_comp_unit,             /*  1 */
+    dst_typ_section_tab,           /*  2 */
+    dst_typ_file_tab,              /*  3 */
+    dst_typ_block,                 /*  4 */
+    dst_typ_5,
+    dst_typ_var,
+    dst_typ_pointer,               /*  7 */
+    dst_typ_array,                 /*  8 */
+    dst_typ_subrange,              /*  9 */
+    dst_typ_set,                   /* 10 */
+    dst_typ_implicit_enum,         /* 11 */
+    dst_typ_explicit_enum,         /* 12 */
+    dst_typ_short_rec,             /* 13 */
+    dst_typ_old_record,
+    dst_typ_short_union,           /* 15 */
+    dst_typ_old_union,
+    dst_typ_file,                  /* 17 */
+    dst_typ_offset,                /* 18 */
+    dst_typ_alias,                 /* 19 */
+    dst_typ_signature,             /* 20 */
+    dst_typ_21,
+    dst_typ_old_label,		   /* 22 */
+    dst_typ_scope,		   /* 23 */
+    dst_typ_end_scope,             /* 24 */
+    dst_typ_25,
+    dst_typ_26,
+    dst_typ_string_tab,            /* 27 */
+    dst_typ_global_name_tab,       /* 28 */
+    dst_typ_forward,               /* 29 */
+    dst_typ_aux_size,              /* 30 */
+    dst_typ_aux_align,             /* 31 */
+    dst_typ_aux_field_size,        /* 32 */
+    dst_typ_aux_field_off,         /* 33 */
+    dst_typ_aux_field_align,       /* 34 */
+    dst_typ_aux_qual,              /* 35 */
+    dst_typ_aux_var_bound,         /* 36 */
+    dst_typ_extension,             /* 37 */
+    dst_typ_string,                /* 38 */
+    dst_typ_old_entry,
+    dst_typ_const,                 /* 40 */
+    dst_typ_reference,             /* 41 */
+    dst_typ_record,                /* 42 */
+    dst_typ_union,                 /* 43 */
+    dst_typ_aux_type_deriv,        /* 44 */
+    dst_typ_locpool,               /* 45 */
+    dst_typ_variable,              /* 46 */
+    dst_typ_label,                 /* 47 */
+    dst_typ_entry,                 /* 48 */
+    dst_typ_aux_lifetime,          /* 49 */
+    dst_typ_aux_ptr_base,          /* 50 */
+    dst_typ_aux_src_range,         /* 51 */
+    dst_typ_aux_reg_val,           /* 52 */
+    dst_typ_aux_unit_names,        /* 53 */
+    dst_typ_aux_sect_info,         /* 54 */
+    dst_typ_END_OF_ENUM
+    }    
+    dst_rec_type_t;
+
+
+/*
+** Dummy bounds for variably dimensioned arrays:
+*/
+#define dst_dummy_array_size  100
+
+
+/*
+** Reference to another item in the symbol table.
+**
+** The value of a dst_rel_offset_t is the relative offset from the start of the
+** referencing record to the start of the referenced record, string, etc. 
+**
+** The value of a NIL dst_rel_offset_t is zero.
+*/
+
+typedef long dst_rel_offset_t  ALIGNED1;
+
+
+/* FIXME: Here and many places we make assumptions about sizes of host
+   data types, structure layout, etc.  Only needs to be fixed if we care
+   about cross-debugging, though.  */
+
+/*
+** Section-relative reference. 
+**
+** The section index field is an index into the local compilation unit's
+** section table (see dst_rec_section_tab_t)--NOT into the object module
+** section table!
+**
+** The sect_offset field is the offset in bytes into the section.
+**
+** A NIL dst_sect_ref_t has a sect_index field of zero.  Indexes originate
+** at one.
+*/
+
+typedef struct
+    {
+    unsigned short  sect_index;
+    unsigned long   sect_offset ALIGNED1;
+    }
+    dst_sect_ref_t;
+
+#define dst_sect_index_nil    0
+#define dst_sect_index_origin 1
+
+
+/*
+** Source location descriptor.
+**
+** The file_index field is an index into the local compilation unit's
+** file table (see dst_rec_file_tab_t).
+**
+** A NIL dst_src_loc_t has a file_index field of zero.  Indexes originate
+** at one.
+*/
+
+typedef struct
+    {
+    boolean  reserved    :  1;  /* reserved for future use */
+    int      file_index  : 11;  /* index into .blocks source file list */
+    int      line_number : 20;  /* source line number */
+    }
+    dst_src_loc_t;
+
+#define dst_file_index_nil    0
+#define dst_file_index_origin 1
+
+
+/*
+** Standard (primitive) type codes.
+*/
+
+typedef enum
+    {
+    dst_non_std_type,
+    dst_int8_type,         /* 8 bit integer */
+    dst_int16_type,        /* 16 bit integer */
+    dst_int32_type,        /* 32 bit integer */
+    dst_uint8_type,        /* 8 bit unsigned integer */
+    dst_uint16_type,       /* 16 bit unsigned integer */
+    dst_uint32_type,       /* 32 bit unsigned integer */
+    dst_real32_type,       /* single precision ieee floatining point */
+    dst_real64_type,       /* double precision ieee floatining point */
+    dst_complex_type,      /* single precision complex */    
+    dst_dcomplex_type,     /* double precision complex */
+    dst_bool8_type,        /* boolean =logical*1 */
+    dst_bool16_type,       /* boolean =logical*2 */
+    dst_bool32_type,       /* boolean =logical*4 */
+    dst_char_type,         /* 8 bit ascii character */
+    dst_string_type,       /* string of 8 bit ascii characters */
+    dst_ptr_type,          /* univ_pointer */
+    dst_set_type,          /* generic 256 bit set */
+    dst_proc_type,         /* generic procedure (signature not specified) */
+    dst_func_type,         /* generic function (signature not specified) */
+    dst_void_type,         /* c void type */
+    dst_uchar_type,        /* c unsigned char */
+    dst_std_type_END_OF_ENUM
+    }    
+    dst_std_type_t;
+
+
+/*
+** General data type descriptor
+**
+** If the user_defined_type bit is clear, then the type is a standard type, and
+** the remaining bits contain the dst_std_type_t of the type.  If the bit is
+** set, then the type is defined in a separate dst record, which is referenced
+** by the remaining bits as a dst_rel_offset_t.
+*/
+
+typedef union
+    {
+    struct
+        {
+        boolean         user_defined_type :  1;  /* tag field */
+        int             must_be_zero      : 23;  /* 23 bits of pad */
+        dst_std_type_t  dtc               :  8;  /* 8 bit primitive data */
+        }
+        std_type;
+   
+    struct
+        {
+        boolean         user_defined_type :  1;  /* tag field */
+        int             doffset           : 31;  /* offset to type record */
+        }
+        user_type;
+    }
+    dst_type_t ALIGNED1;
+
+/* The user_type.doffset field is a 31-bit signed value.  Some versions of C
+   do not support signed bit fields.  The following macro will extract that
+   field as a signed value:
+*/
+#define dst_user_type_offset(type_rec) \
+    ( ((int) ((type_rec).user_type.doffset << 1)) >> 1 )
+
+
+/*================================================*/
+/*========== RECORDS IN .blocks SECTION ==========*/
+/*================================================*/
+
+/*-----------------------
+  COMPILATION UNIT record 
+  -----------------------
+  This must be the first record in each .blocks section.
+  Provides a set of information describing the output of a single compilation
+  and pointers to additional information for the compilation unit.
+*/
+
+typedef enum
+    { 
+    dst_pc_code_locs,          /* ranges in loc strings are pc ranges */
+    dst_comp_unit_END_OF_ENUM
+    }    
+    dst_comp_unit_flag_t;
+
+typedef enum
+    {
+    dst_lang_unk,          /* unknown language */
+    dst_lang_pas,          /* Pascal */
+    dst_lang_ftn,          /* FORTRAN */
+    dst_lang_c,            /* C */
+    dst_lang_mod2,         /* Modula-2 */
+    dst_lang_asm_m68k,     /* 68K assembly language */
+    dst_lang_asm_a88k,     /* AT assembly language */
+    dst_lang_ada,          /* Ada */
+    dst_lang_cxx,          /* C++ */
+    dst_lang_END_OF_ENUM
+    }    
+    dst_lang_type_t;
+
+typedef struct
+    {
+    struct
+        {
+        unsigned char major_part;         /* = dst_version_major */
+        unsigned char minor_part;         /* = dst_version_minor */
+        }           
+        version;                          /* version of dst */
+    unsigned short    flags;              /* mask of dst_comp_unit_flag_t */
+    unsigned short   lang_type;          /* source language */
+    unsigned short    number_of_blocks;   /* number of blocks records */
+    dst_rel_offset_t  root_block_offset;  /* offset to root block (module?) */
+    dst_rel_offset_t  section_table       /* offset to section table record */;
+    dst_rel_offset_t  file_table;         /* offset to file table record */
+    unsigned long     data_size;          /* total size of .blocks data */
+    }
+    dst_rec_comp_unit_t ALIGNED1;
+
+
+/*--------------------
+  SECTION TABLE record
+  --------------------
+  There must be one section table associated with each compilation unit.
+  Other debug records refer to sections via their index in this table.  The
+  section base addresses in the table are virtual addresses of the sections,
+  relocated by the linker.
+*/
+
+typedef struct
+    {
+    unsigned short  number_of_sections;   /* size of array: */    
+    unsigned long   section_base[dst_dummy_array_size] ALIGNED1;
+    }
+    dst_rec_section_tab_t ALIGNED1;
+
+
+/*-----------------
+  FILE TABLE record
+  -----------------
+  There must be one file table associated with each compilation unit describing
+  the source (and include) files used by each compilation unit.  Other debug 
+  records refer to files via their index in this table.  The first entry is the
+  primary source file.
+*/
+
+typedef struct
+    {
+    long              dtm;        /* time last modified (time_$clock_t) */
+    dst_rel_offset_t  noffset;    /* offset to name string for source file */
+    }
+    dst_file_desc_t;
+
+typedef struct
+    {
+    unsigned short   number_of_files;    /* size of array: */
+    dst_file_desc_t  files[dst_dummy_array_size] ALIGNED1;
+    }
+    dst_rec_file_tab_t ALIGNED1;
+
+
+/*-----------------
+  NAME TABLE record
+  -----------------
+  A name table record may appear as an auxiliary record to the file table,
+  providing additional qualification of the file indexes for languages that 
+  need it (i.e. Ada).  Name table entries parallel file table entries of the
+  same file index.
+*/
+
+typedef struct
+    {
+    unsigned short    number_of_names;    /* size of array: */
+    dst_rel_offset_t  names[dst_dummy_array_size] ALIGNED1;
+    }
+    dst_rec_name_tab_t ALIGNED1;
+
+
+/*--------------
+  BLOCK record
+  --------------
+  Describes a lexical program block--a procedure, function, module, etc.
+*/
+
+/* Block types.  These may be used in any way desired by the compiler writers. 
+   The debugger uses them only to give a description to the user of the type of
+   a block.  The debugger makes no other assumptions about the meaning of any
+   of these.  For example, the fact that a block is executable (e.g., program)
+   or not (e.g., module) is expressed in block attributes (see below), not
+   guessed at from the block type.
+*/    
+typedef enum
+    {
+    dst_block_module,          /* some pascal = modula = ada types */
+    dst_block_program,         
+    dst_block_procedure,      
+    dst_block_function,        /* C function */
+    dst_block_subroutine,      /* some fortran block types */
+    dst_block_block_data,      
+    dst_block_stmt_function,  
+    dst_block_package,         /* a few particular to Ada */
+    dst_block_package_body,  
+    dst_block_subunit,        
+    dst_block_task,            
+    dst_block_file,            /* a C outer scope? */
+    dst_block_class,           /* C++ or Simula */
+    dst_block_END_OF_ENUM
+    }    
+    dst_block_type_t;
+
+/* Block attributes.  This is the information used by the debugger to represent
+   the semantics of blocks.
+*/
+typedef enum
+    {
+    dst_block_main_entry,      /* the block's entry point is a main entry into
+                                  the compilation unit */    
+    dst_block_executable,      /* the block has an entry point */
+    dst_block_attr_END_OF_ENUM
+    }    
+    dst_block_attr_t;
+
+/* Code range.  Each block has associated with it one or more code ranges. An
+   individual code range is identified by a range of source (possibly nil) and
+   a range of executable code.  For example, a block which has its executable
+   code spread over multiple sections will have one code range per section.
+*/
+typedef struct
+    {
+    unsigned long   code_size;      /* size of executable code (in bytes ) */
+    dst_sect_ref_t  code_start;     /* starting address of executable code */
+    dst_sect_ref_t  lines_start;    /* start of line number tables */
+    }
+    dst_code_range_t;
+
+typedef struct
+    {
+    dst_block_type_t  block_type : 8; 
+    unsigned short    flags      : 8;       /* mask of dst_block_attr_t flags */
+    dst_rel_offset_t  sibling_block_off;    /* offset to next sibling block */
+    dst_rel_offset_t  child_block_off;      /* offset to first contained block */
+    dst_rel_offset_t  noffset;              /* offset to block name string */    
+    dst_sect_ref_t    symbols_start;        /* start of debug symbols  */
+    unsigned short    n_of_code_ranges;     /* size of array... */
+    dst_code_range_t  code_ranges[dst_dummy_array_size] ALIGNED1;
+    }
+    dst_rec_block_t ALIGNED1;
+
+
+/*--------------------------
+  AUX SECT INFO TABLE record
+  --------------------------
+  Appears as an auxiliary to a block record.  Expands code range information
+  by providing references into additional, language-dependent sections for 
+  information related to specific code ranges of the block.  Sect info table
+  entries parallel code range array entries of the same index.
+*/
+
+typedef struct
+    {
+    unsigned char    tag;               /* currently can only be zero */
+    unsigned char    number_of_refs;    /* size of array: */
+    dst_sect_ref_t   refs[dst_dummy_array_size] ALIGNED1;
+    }
+    dst_rec_sect_info_tab_t ALIGNED1;
+
+/*=================================================*/
+/*========== RECORDS IN .symbols SECTION ==========*/
+/*=================================================*/
+
+/*-----------------
+  CONSTANT record
+  -----------------
+  Describes a symbolic constant.
+*/
+
+typedef struct
+    {
+    float    r;      /* real part */
+    float    i;      /* imaginary part */
+    }
+    dst_complex_t;
+
+typedef struct
+    {
+    double    dr;     /* real part */
+    double    di;     /* imaginary part */
+    }
+    dst_double_complex_t;
+
+/* The following record provides a way of describing constant values with 
+   non-standard type and no limit on size. 
+*/
+typedef union
+    {
+    char    char_data[dst_dummy_array_size];
+    short   int_data [dst_dummy_array_size];
+    long    long_data[dst_dummy_array_size];
+    }
+    dst_big_kon_t;
+
+/* Representation of the value of a general constant.
+*/
+typedef struct
+    {
+    unsigned short            length;     /* size of constant value (bytes) */
+
+    union
+        {
+        unsigned short        kon_int8;
+        short                 kon_int16;
+        long                  kon_int32   ALIGNED1;
+        float                 kon_real    ALIGNED1;
+        double                kon_dbl     ALIGNED1;
+        dst_complex_t         kon_cplx    ALIGNED1;
+        dst_double_complex_t  kon_dcplx   ALIGNED1;
+        char                  kon_char;
+        dst_big_kon_t         kon         ALIGNED1;
+        }                    
+        val;                              /* value data of constant */
+    }
+    dst_const_t ALIGNED1;
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;        /* offset to name string */
+    dst_src_loc_t      src_loc;        /* file/line of const definition */
+    dst_type_t         type_desc;      /* type of this (manifest) constant */
+    dst_const_t        value; 
+    }
+    dst_rec_const_t ALIGNED1;
+
+/*----------------
+  VARIABLE record
+  ----------------
+  Describes a program variable.
+*/
+
+/* Variable attributes.  These define certain variable semantics to the
+   debugger.
+*/
+typedef enum
+    {
+    dst_var_attr_read_only,      /* is read-only (a program literal) */
+    dst_var_attr_volatile,       /* same as compiler's VOLATILE attribute */
+    dst_var_attr_global,         /* is a global definition or reference */    
+    dst_var_attr_compiler_gen,   /* is compiler-generated */
+    dst_var_attr_static,         /* has static location */
+    dst_var_attr_END_OF_ENUM
+    }    
+    dst_var_attr_t;
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;       /* offset to name string */
+    dst_rel_offset_t  loffset;       /* offset to loc string */
+    dst_src_loc_t     src_loc;       /* file/line of variable definition */
+    dst_type_t        type_desc;     /* type descriptor */
+    unsigned short    attributes;    /* mask of dst_var_attr_t flags */
+    }
+    dst_rec_variable_t ALIGNED1;
+
+
+/*----------------
+  old VAR record
+ -----------------
+ Used by older compilers to describe a variable
+*/
+
+typedef enum
+    {
+    dst_var_loc_unknown,	/* Actually defined as "unknown" */
+    dst_var_loc_abs,		/* Absolute address */
+    dst_var_loc_sect_off,	/* Absolute address as a section offset */
+    dst_var_loc_ind_sect_off,	/* An indexed section offset ???? */
+    dst_var_loc_reg,		/* register */
+    dst_var_loc_reg_rel,	/* register relative - usually fp */
+    dst_var_loc_ind_reg_rel,	/* Indexed register relative */
+    dst_var_loc_ftn_ptr_based,	/* Fortran pointer based */
+    dst_var_loc_pc_rel,		/* PC relative. Really. */
+    dst_var_loc_external,	/* External */
+    dst_var_loc_END_OF_ENUM
+    }
+    dst_var_loc_t;
+
+/* Locations come in two versions. The sort, and the long. The difference
+ * between the short and the long is the addition of a statement number
+ * field to the start andend of the range of the long, and and unkown
+ * purpose field in the middle. Also, loc_type and loc_index aren't
+ * bitfields in the long version.
+ */
+
+typedef	struct
+    {
+    unsigned short	loc_type : 4;
+    unsigned short	loc_index : 12;
+    long		location;
+    short		start_line;	/* start_line and end_line? */
+    short		end_line;	/* I'm guessing here.	    */
+    } dst_var_loc_short_t;
+
+typedef struct
+    {
+    unsigned short	loc_type;
+    unsigned short	loc_index;
+    long		location;
+    short		unknown;	/* Always 0003 or 3b3c. Why? */
+    short		start_statement;
+    short		start_line;
+    short		end_statement;
+    short		end_line;
+    } dst_var_loc_long_t;
+
+
+typedef struct
+    {
+    dst_rel_offset_t	noffset;	/* offset to name string */
+    dst_src_loc_t	src_loc;	/* file/line of description */
+    dst_type_t		type_desc;	/* Type description */
+    unsigned short	attributes;	/* mask of dst_var_attr_t flags */
+    unsigned short	no_of_locs : 15;/* Number of locations */
+    unsigned short	short_locs : 1;	/* True if short locations. */
+    union
+	{
+	dst_var_loc_short_t shorts[dst_dummy_array_size];
+	dst_var_loc_long_t longs[dst_dummy_array_size];
+	} locs;
+    } dst_rec_var_t;
+
+/*----------------
+  old LABEL record
+ -----------------
+ Used by older compilers to describe a label
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t	noffset;	/* offset to name string */
+    dst_src_loc_t	src_loc;	/* file/line of description */
+    char		location[12];	/* location string */
+    }
+    dst_rec_old_label_t ALIGNED1;
+
+/*----------------
+  POINTER record
+  ----------------
+  Describes a pointer type.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;    /* offset to the name string for this type */
+    dst_src_loc_t     src_loc;    /* file/line of definition */
+    dst_type_t        type_desc;  /* base type of this pointer */
+    }
+    dst_rec_pointer_t ALIGNED1;
+
+
+/*-------------
+  ARRAY record
+  -------------
+  Describes an array type.
+
+  Multidimensional arrays are described with a number of dst_rec_array_t 
+  records, one per array dimension, each linked to the next through the
+  elem_type_desc.doffset field.  Each record must have its multi_dim flag
+  set.
+
+  If column_major is true (as with FORTRAN arrays) then the last array bound in
+  the declaration is the first array index in memory, which is the opposite of
+  the usual case (as with Pascal and C arrays).
+
+  Variable array bounds are described by auxiliary records; if aux_var_bound
+  records are present, the lo_bound and hi_bound fields of this record are
+  ignored by the debugger.
+
+  span_comp identifies one of the language-dependent ways in which the distance
+  between successive array elements (span) is calculated.  
+     dst_use_span_field    -- the span is the value of span field.
+     dst_compute_from_prev -- the span is the size of the previous dimension.
+     dst_compute_from_next -- the span is the size of the next dimension.
+  In the latter two cases, the span field contains an amount of padding to add
+  to the size of the appropriate dimension to calculate the span.
+*/
+
+typedef enum
+    {
+    dst_use_span_field,  
+    dst_compute_from_prev,
+    dst_compute_from_next,        
+    dst_span_comp_END_OF_ENUM
+    }
+    dst_span_comp_t;
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;           /* offset to name string */
+    dst_src_loc_t     src_loc;           /* file/line of definition */
+    dst_type_t        elem_type_desc;    /* array element type */    
+    dst_type_t        indx_type_desc;    /* array index type */
+    long              lo_bound;          /* lower bound of index */
+    long              hi_bound;          /* upper bound of index */
+    unsigned long     span;              /* see above */
+    unsigned long     size;              /* total array size (bytes) */
+    boolean           multi_dim : 1;
+    boolean           is_packed : 1;     /* true if packed array */    
+    boolean           is_signed : 1;     /* true if packed elements are signed */
+    dst_span_comp_t   span_comp : 2;     /* how to compute span */
+    boolean           column_major : 1;
+    unsigned short    reserved  : 2;     /* must be zero */
+    unsigned short    elem_size : 8;     /* element size if packed (bits) */
+    }    
+    dst_rec_array_t ALIGNED1;
+
+
+/*-----------------
+  SUBRANGE record
+  -----------------
+  Describes a subrange type.
+*/
+
+/* Variable subrange bounds are described by auxiliary records; if aux_var_bound
+   records are present, the lo_bound and hi_bound fields of this record are
+   ignored by the debugger.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;       /* offset to name string */
+    dst_src_loc_t     src_loc;       /* file/line of subrange definition */
+    dst_type_t        type_desc;     /* parent type */    
+    long              lo_bound;      /* lower bound of subrange */
+    long              hi_bound;      /* upper bound of subrange */
+    unsigned short    size;          /* storage size (bytes) */
+    }
+    dst_rec_subrange_t ALIGNED1;
+
+
+/*---------------
+  STRING record 
+  ---------------
+  Describes a string type.
+*/
+
+/* Variable subrange bounds are described by auxiliary records; if aux_var_bound
+   records are present, the lo_bound and hi_bound fields of this record are
+   ignored by the debugger.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;          /* offset to name string */
+    dst_src_loc_t     src_loc;          /* file/line of string definition */
+    dst_type_t        elem_type_desc;   /* element type */    
+    dst_type_t        indx_type_desc;   /* index type */
+    long              lo_bound;         /* lower bound */
+    long              hi_bound;         /* upper bound */
+    unsigned long     size;             /* total string size (bytes) if fixed */
+    }
+    dst_rec_string_t ALIGNED1;
+
+
+/*---------------
+  SET record 
+  ---------------
+  Describes a set type.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;       /* offset to name string */
+    dst_src_loc_t     src_loc;       /* file/line of definition */
+    dst_type_t        type_desc;     /* element type */    
+    unsigned short    nbits;         /* number of bits in set */
+    unsigned short    size;          /* storage size (bytes) */
+    }
+    dst_rec_set_t ALIGNED1;
+
+
+/*-----------------------------
+  IMPLICIT ENUMERATION record 
+  -----------------------------
+  Describes an enumeration type with implicit element values = 0, 1, 2, ...
+  (Pascal-style).
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;      /* offset to name string */    
+    dst_src_loc_t      src_loc;      /* file/line of definition */
+    unsigned short     nelems;       /* number of elements in enumeration */
+    unsigned short     size;         /* storage size (bytes) */
+    /* offsets to name strings of elements 0, 1, 2, ... */
+    dst_rel_offset_t   elem_noffsets[dst_dummy_array_size]; 
+    }
+    dst_rec_implicit_enum_t ALIGNED1;
+
+
+/*-----------------------------
+  EXPLICIT ENUMERATION record 
+  -----------------------------
+  Describes an enumeration type with explicitly assigned element values
+  (C-style).
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;       /* offset to element name string */
+    long               value;         /* element value */
+    }
+    dst_enum_elem_t;
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;       /* offset to name string */
+    dst_src_loc_t      src_loc;       /* file/line of definition */
+    unsigned short     nelems;        /* number of elements in enumeration */
+    unsigned short     size;          /* storage size (bytes) */
+    /* name/value pairs, one describing each enumeration value: */
+    dst_enum_elem_t    elems[dst_dummy_array_size]; 
+    }
+    dst_rec_explicit_enum_t ALIGNED1;
+
+
+/*-----------------------
+  RECORD / UNION record 
+  -----------------------
+  Describes a record (struct) or union.
+
+  If the record is larger than 2**16 bytes then an attached aux record
+  specifies its size.  Also, if the record is stored in short form then
+  attached records specify field offsets larger than 2**16 bytes.
+
+  Whether the fields[] array or sfields[] array is used is selected by
+  the dst_rec_type_t of the overall dst record.
+*/
+
+/*
+   Record field descriptor, short form.  This form handles only fields which
+   are an even number of bytes long, located some number of bytes from the
+   start of the record.
+*/
+typedef struct
+    {
+    dst_rel_offset_t  noffset;     /* offset to field name string */
+    dst_type_t        type_desc;   /* field type */
+    unsigned short    foffset;     /* field offset from start of record (bytes) */
+    }
+    dst_short_field_t ALIGNED1;
+
+typedef struct
+    {
+    dst_rel_offset_t	noffset;	/* offset to name string */
+    dst_type_t		type_desc;	/* field type */
+    unsigned short	foffset;	/* byte offset */
+    unsigned short	is_packed : 1;	/* True if field is packed */
+    unsigned short	bit_offset : 6;	/* Bit offset */
+    unsigned short	size : 6;	/* Size in bits */
+    unsigned short	sign : 1;	/* True if signed */
+    unsigned short	pad : 2;	/* Padding. Must be 0 */
+    }
+    dst_old_field_t ALIGNED1;
+
+/* Tag enumeration for long record field descriptor:
+*/
+typedef enum
+    {
+    dst_field_byte,
+    dst_field_bit,
+    dst_field_loc,
+    dst_field_END_OF_ENUM
+    }
+    dst_field_format_t;
+
+/*
+   Record field descriptor, long form.  The format of the field information
+   is identified by the format_tag, which contains one of the above values.
+   The field_byte variant is equivalent to the short form of field descriptor.
+   The field_bit variant handles fields which are any number of bits long,
+   located some number of bits from the start of the record.  The field_loc
+   variant allows the location of the field to be described by a general loc
+   string.
+*/
+typedef struct
+    {
+    dst_rel_offset_t   noffset;                 /* offset to name of field */
+    dst_type_t         type_desc;               /* type of field */
+    union
+        {
+        struct {
+            dst_field_format_t format_tag: 2;   /* dst_field_byte */
+            unsigned long      offset: 30;      /* offset of field in bytes */
+            }
+            field_byte ALIGNED1;
+        struct {
+            dst_field_format_t format_tag: 2;   /* dst_field_bit */
+            unsigned long      nbits: 6;        /* bit size of field */
+            unsigned long      is_signed: 1;    /* signed/unsigned attribute */
+            unsigned long      bit_offset: 3;   /* bit offset from byte boundary */
+            int                pad: 4;          /* must be zero */
+            unsigned short     byte_offset;     /* offset of byte boundary */
+            }
+            field_bit ALIGNED1;
+        struct {
+            dst_field_format_t format_tag: 2;   /* dst_field_loc */
+            int                loffset: 30;     /* dst_rel_offset_t to loc string */
+            }
+            field_loc ALIGNED1;
+        }
+        f ALIGNED1;
+    }
+    dst_field_t;
+
+/* The field_loc.loffset field is a 30-bit signed value.  Some versions of C do
+   not support signed bit fields.  The following macro will extract that field
+   as a signed value:
+*/
+#define dst_field_loffset(field_rec) \
+    ( ((int) ((field_rec).f.field_loc.loffset << 2)) >> 2 )
+
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;      /* offset to record name string */
+    dst_src_loc_t      src_loc;      /* file/line where this record is defined */
+    unsigned short      size;        /* storage size (bytes) */
+    unsigned short      nfields;     /* number of fields in this record */
+    union
+        {
+        dst_field_t        fields[dst_dummy_array_size];
+        dst_short_field_t  sfields[dst_dummy_array_size];
+	dst_old_field_t	   ofields[dst_dummy_array_size];
+        }
+        f;                           /* array of fields */
+    }
+    dst_rec_record_t ALIGNED1;
+
+
+/*-------------
+  FILE record
+  -------------
+  Describes a file type.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;       /* offset to name string */
+    dst_src_loc_t     src_loc;       /* file/line where type was defined */
+    dst_type_t        type_desc;     /* file element type */
+    }
+    dst_rec_file_t ALIGNED1;
+
+
+/*---------------
+  OFFSET record 
+  ---------------
+   Describes a Pascal offset type.
+   (This type, an undocumented Domain Pascal extension, is currently not
+   supported by the debugger)
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;           /* offset to the name string */
+    dst_src_loc_t      src_loc;           /* file/line of definition */
+    dst_type_t         area_type_desc;    /* area type */    
+    dst_type_t         base_type_desc;    /* base type */
+    long               lo_bound;          /* low bound of the offset range */
+    long               hi_bound;          /* high bound of the offset range */
+    long               bias;              /* bias */    
+    unsigned short     scale;             /* scale factor */
+    unsigned short     size;              /* storage size (bytes) */
+    }
+    dst_rec_offset_t ALIGNED1;
+
+
+/*--------------
+  ALIAS record 
+  --------------
+  Describes a type alias (e.g., typedef).
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;      /* offset to name string */
+    dst_src_loc_t      src_loc;      /* file/line of definition */
+    dst_type_t         type_desc;    /* parent type */
+    }
+    dst_rec_alias_t ALIGNED1;
+
+
+/*------------------
+  SIGNATURE record
+  ------------------
+  Describes a procedure/function type.
+*/
+
+/* Enumeration of argument semantics.  Note that most are mutually
+   exclusive.
+*/
+typedef enum
+    {
+    dst_arg_attr_val,          /* passed by value */
+    dst_arg_attr_ref,          /* passed by reference */
+    dst_arg_attr_name,         /* passed by name */
+    dst_arg_attr_in,           /* readable in the callee */
+    dst_arg_attr_out,          /* writable in the callee */    
+    dst_arg_attr_hidden,       /* not visible in the caller */
+    dst_arg_attr_END_OF_ENUM
+    }    
+    dst_arg_attr_t;
+
+/* Argument descriptor.  Actually points to a variable record for most of the
+   information.
+*/
+typedef struct
+    {
+    dst_rel_offset_t  var_offset;     /* offset to variable record */
+    unsigned short    attributes;     /* a mask of dst_arg_attr_t flags */
+    }
+    dst_arg_t ALIGNED1;
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;    /* offset to name string */
+    dst_src_loc_t      src_loc;    /* file/line of function definition */
+    dst_rel_offset_t   result;     /* offset to function result variable record */
+    unsigned short     nargs;      /* number of arguments */
+    dst_arg_t          args[dst_dummy_array_size]; 
+    }
+    dst_rec_signature_t ALIGNED1;
+
+/*--------------
+  SCOPE record
+  --------------
+  Obsolete. Use the new ENTRY type instead.
+  Old compilers may put this in as the first entry in a function,
+  terminated by an end of scope entry.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t	noffset;	/* Name offset */
+    dst_src_loc_t	start_line;	/* Starting line */
+    dst_src_loc_t	end_line;	/* Ending line */
+    }
+    dst_rec_scope_t ALIGNED1;
+
+/*--------------
+  ENTRY record
+  --------------
+  Describes a procedure/function entry point.  An entry record is to a
+  signature record roughly as a variable record is to a type descriptor record.
+
+  The entry_number field is keyed to the entry numbers in .lines -- the 
+  debugger locates the code location of an entry by searching the line
+  number table for an entry numbered with the value of entry_number.  The
+  main entry is numbered zero.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t  noffset;           /* offset to entry name string */
+    dst_rel_offset_t  loffset;           /* where to jump to call this entry */
+    dst_src_loc_t     src_loc;           /* file/line of definition */
+    dst_rel_offset_t  sig_desc;          /* offset to signature descriptor */
+    unsigned int      entry_number: 8;
+    int               pad: 8;            /* must be zero */
+    }
+    dst_rec_entry_t ALIGNED1;
+
+/*-----------------------
+  Old format ENTRY record
+  -----------------------
+  Supposedly obsolete but still used by some compilers.
+ */
+
+typedef struct
+    {
+    dst_rel_offset_t	noffset;	/* Offset to entry name string */
+    dst_src_loc_t	src_loc;	/* Location in source */
+    dst_rel_offset_t	sig_desc;	/* Signature description */
+    char		unknown[36];
+    }
+    dst_rec_old_entry_t ALIGNED1;
+
+/*--------------
+  LABEL record 
+  --------------
+  Describes a program label.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   noffset;        /* offset to label string */
+    dst_rel_offset_t   loffset;        /* offset to loc string */
+    dst_src_loc_t      src_loc;        /* file/line of definition */
+    }
+    dst_rec_label_t ALIGNED1;
+
+
+/*-----------------------
+  AUXILIARY SIZE record
+  -----------------------
+  May appear in the auxiliary record list of any type or variable record to
+  modify the default size of the type or variable.
+*/
+
+typedef struct
+    {
+    unsigned long  size;       /* size (bytes) */
+    }
+    dst_rec_aux_size_t ALIGNED1;
+
+
+/*-----------------------
+  AUXILIARY ALIGN record
+  -----------------------
+  May appear in the auxiliary record list of any type or variable record to
+  modify the default alignment of the type or variable.
+*/
+
+typedef struct
+    {
+    unsigned short    alignment;  /* # of low order zero bits */
+    }
+    dst_rec_aux_align_t ALIGNED1;
+
+
+/*-----------------------------
+  AUXILIARY FIELD SIZE record
+  -----------------------------
+  May appear in the auxiliary record list of any RECORD/UNION record to 
+  modify the default size of a field.
+*/
+
+typedef struct
+    {
+    unsigned short field_no;       /* field number */
+    unsigned long  size;           /* size (bits) */
+    }
+    dst_rec_aux_field_size_t ALIGNED1;
+
+
+
+/*-----------------------------
+  AUXILIARY FIELD OFFSET record
+  -----------------------------
+  May appear in the auxiliary record list of any RECORD/UNION record to 
+  specify a field offset larger than 2**16.
+*/
+
+typedef struct
+    {
+    unsigned short field_no;       /* field number */
+    unsigned long  foffset;        /* offset */
+    }
+    dst_rec_aux_field_off_t ALIGNED1;
+
+
+/*-----------------------------
+  AUXILIARY FIELD ALIGN record
+  -----------------------------
+  May appear in the auxiliary record list of any RECORD/UNION record to 
+  modify the default alignment of a field.
+*/
+
+typedef struct
+    {
+    unsigned short field_no;       /* field number */
+    unsigned short alignment;      /* number of low order zero bits */
+    }
+    dst_rec_aux_field_align_t ALIGNED1;
+
+
+/*----------------------------
+  AUXILIARY VAR BOUND record
+  ----------------------------
+  May appear in the auxiliary record list of any ARRAY, SUBRANGE or STRING
+  record to describe a variable bound for the range of the type.
+*/
+
+typedef enum
+    {
+    dst_low_bound,       /* the low bound is variable */
+    dst_high_bound,      /* the high bound is variable */
+    dst_var_bound_END_OF_ENUM
+    }
+    dst_var_bound_t;
+
+typedef struct
+    {
+    unsigned short    which;              /* which bound */
+    dst_rel_offset_t   voffset ALIGNED1;   /* variable that defines bound */
+    }    
+    dst_rec_aux_var_bound_t ALIGNED1;
+
+
+/*----------------------------------
+  AUXILIARY TYPE DERIVATION record 
+  ----------------------------------
+  May appear in the auxiliary record list of any RECORD/UNION record to denote
+  class inheritance of that type from a parent type.
+
+  Inheritance implies that it is possible to convert the inheritor type to the
+  inherited type, retaining those fields which were inherited.  To allow this,
+  orig_field_no, a field number into the record type, is provided.  If 
+  orig_is_pointer is false, then the start of the inherited record is located
+  at the location of the field indexed by orig_field_no.  If orig_is_pointer
+  is true, then it is located at the address contained in the field indexed
+  by orig_field_no (assumed to be a pointer).
+*/
+
+typedef struct
+    {
+    dst_type_t     parent_type;             /* reference to inherited type */
+    unsigned short orig_field_no;
+    boolean        orig_is_pointer: 1;
+    int            unused: 15;              /* must be zero */
+    }
+    dst_rec_aux_type_deriv_t ALIGNED1;
+
+
+/*------------------------------------
+  AUXILIARY VARIABLE LIFETIME record
+  ------------------------------------
+  May appear in the auxiliary record list of a VARIABLE record to add location
+  information for an additional variable lifetime.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t loffset;
+    }
+    dst_rec_aux_lifetime_t ALIGNED1;
+
+
+/*-------------------------------
+  AUXILIARY POINTER BASE record 
+  -------------------------------
+  May appear in the auxiliary record list of a VARIABLE record to provide a
+  pointer base to substitute for references to any such bases in the location
+  string of the variable.  A pointer base is another VARIABLE record.  When
+  the variable is evaluated by the debugger, it uses the current value of the
+  pointer base variable in computing its location.
+
+  This is useful for representing FORTRAN pointer-based variables.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t voffset;
+    }
+    dst_rec_aux_ptr_base_t ALIGNED1;
+
+
+/*---------------------------------
+  AUXILIARY REGISTER VALUE record 
+  ---------------------------------
+  May appear in the auxiliary record list of an ENTRY record to specify
+  a register that must be set to a specific value before jumping to the entry
+  point in a debugger "call".  The debugger must set the debuggee register,
+  specified by the register code, to the value of the *address* to which the
+  location string resolves.  If the address is register-relative, then the
+  call cannot be made unless the current stack frame is the lexical parent
+  of the entry.  An example of this is when a (Pascal) nested procedure
+  contains references to its parent's variables, which it accesses through
+  a static link register.  The static link register must be set to some
+  address relative to the parent's stack base register.
+*/
+
+typedef struct
+    {
+    unsigned short    reg;        /* identifies register to set (isp enum) */
+    dst_rel_offset_t  loffset;    /* references a location string */
+    }
+    dst_rec_aux_reg_val_t ALIGNED1;
+
+
+/*==========================================================*/
+/*========== RECORDS USED IN .blocks AND .symbols ==========*/
+/*==========================================================*/
+
+/*---------------------
+  STRING TABLE record
+  ---------------------
+  A string table record contains any number of null-terminated, variable length
+  strings.   The length field gives the size in bytes of the text field, which
+  can be any size.
+
+  The global name table shares this format.  This record appears in the
+  .blocks section.  Each string in the table identifies a global defined in
+  the current compilation unit.
+
+  The loc pool record shares this format as well.  Loc strings are described
+  elsewhere.
+*/
+
+typedef struct
+    {
+    unsigned long length;               
+    char          text[dst_dummy_array_size];
+    }
+    dst_rec_string_tab_t ALIGNED1;
+
+
+/*-----------------------
+  AUXILIARY QUAL record 
+  -----------------------
+  May appear in the auxiliary record list of any BLOCK, VARIABLE, or type record
+  to provide it with a fully-qualified, language-dependent name.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   lang_qual_name;
+    }
+    dst_rec_aux_qual_t ALIGNED1;
+
+
+/*----------------
+  FORWARD record
+  ----------------
+  Reference to a record somewhere else.  This allows identical definitions in
+  different scopes to share data.
+*/
+
+typedef struct
+    {
+    dst_rel_offset_t   rec_off;
+    }
+    dst_rec_forward_t ALIGNED1;
+
+
+/*-------------------------------
+  AUXILIARY SOURCE RANGE record
+  -------------------------------
+  May appear in the auxiliary record list of any BLOCK record to specify a
+  range of source lines over which the block is active.
+*/
+
+typedef struct
+    {
+    dst_src_loc_t   first_line;             /* first source line */
+    dst_src_loc_t   last_line;              /* last source line */
+    }
+    dst_rec_aux_src_range_t ALIGNED1;
+
+
+/*------------------
+  EXTENSION record 
+  ------------------
+  Provision for "foreign" records, such as might be generated by a non-Apollo
+  compiler.  Apollo software will ignore these.
+*/
+
+typedef struct
+    {
+    unsigned short  rec_size;   /* record size (bytes) */
+    unsigned short  ext_type;   /* defined by whoever generates it */
+    unsigned short  ext_data;   /* place-holder for arbitrary amount of data */
+    }
+    dst_rec_extension_t ALIGNED1;
+
+
+/*
+** DEBUG SYMBOL record -- The wrapper for all .blocks and .symbols records.
+**
+** This record ties together all previous .blocks and .symbols records 
+** together in a union with a common header.  The rec_type field of the
+** header identifies the record type.  The rec_flags field currently only
+** defines auxiliary record lists. 
+**
+** If a record carries with it a non-null auxiliary record list, its
+** dst_flag_has_aux_recs flag is set, and each of the records that follow
+** it are treated as its auxiliary records, until the end of the compilation
+** unit or scope is reached, or until an auxiliary record with its
+** dst_flag_last_aux_rec flag set is reached.
+*/
+
+typedef enum
+    {
+    dst_flag_has_aux_recs,
+    dst_flag_last_aux_rec,
+    dst_rec_flag_END_OF_ENUM
+    }    
+    dst_rec_flags_t;
+
+typedef struct
+    {
+    dst_rec_type_t    rec_type : 8;     /* record type */
+    int               rec_flags: 8;     /* mask of dst_rec_flags_t */
+    union                               /* switched on rec_type field above */
+        {
+           /* dst_typ_pad requires no additional fields */
+        dst_rec_comp_unit_t        comp_unit_;
+        dst_rec_section_tab_t      section_tab_;
+        dst_rec_file_tab_t         file_tab_;  
+        dst_rec_block_t            block_;   
+	dst_rec_var_t		   var_;
+        dst_rec_pointer_t          pointer_;   
+        dst_rec_array_t            array_; 
+        dst_rec_subrange_t         subrange_;
+        dst_rec_set_t              set_;
+        dst_rec_implicit_enum_t    implicit_enum_;   
+        dst_rec_explicit_enum_t    explicit_enum_;
+           /* dst_typ_short_{rec,union} are represented by 'rec' (below) */
+        dst_rec_file_t             file_;   
+        dst_rec_offset_t           offset_;   
+        dst_rec_alias_t            alias_; 
+        dst_rec_signature_t        signature_;
+	dst_rec_old_label_t	   old_label_;
+	dst_rec_scope_t		   scope_;
+           /* dst_typ_end_scope requires no additional fields */
+        dst_rec_string_tab_t       string_tab_;   
+           /* dst_typ_global_name_tab is represented by 'string_tab' (above) */
+        dst_rec_forward_t          forward_;   
+        dst_rec_aux_size_t         aux_size_;   
+        dst_rec_aux_align_t        aux_align_;  
+        dst_rec_aux_field_size_t   aux_field_size_; 
+        dst_rec_aux_field_off_t    aux_field_off_;
+        dst_rec_aux_field_align_t  aux_field_align_;
+        dst_rec_aux_qual_t         aux_qual_;   
+        dst_rec_aux_var_bound_t    aux_var_bound_;  
+        dst_rec_extension_t        extension_;
+        dst_rec_string_t           string_;  
+        dst_rec_const_t            const_; 
+           /* dst_typ_reference is represented by 'pointer' (above) */
+        dst_rec_record_t           record_; 
+           /* dst_typ_union is represented by 'record' (above) */
+        dst_rec_aux_type_deriv_t   aux_type_deriv_; 
+           /* dst_typ_locpool is represented by 'string_tab' (above) */
+        dst_rec_variable_t         variable_;  
+        dst_rec_label_t            label_; 
+        dst_rec_entry_t            entry_; 
+        dst_rec_aux_lifetime_t     aux_lifetime_;
+        dst_rec_aux_ptr_base_t     aux_ptr_base_;
+        dst_rec_aux_src_range_t    aux_src_range_;  
+        dst_rec_aux_reg_val_t      aux_reg_val_;
+        dst_rec_name_tab_t         aux_unit_names_;
+        dst_rec_sect_info_tab_t    aux_sect_info_;
+        }
+        rec_data    ALIGNED1;
+    }
+    dst_rec_t, *dst_rec_ptr_t;
+
+
+/*===============================================*/
+/*========== .lines SECTION DEFINITIONS =========*/
+/*===============================================*/
+/*
+  The .lines section contains a sequence of line number tables.  There is no
+  record structure within the section.  The start of the table for a routine
+  is pointed to by the block record, and the end of the table is signaled by
+  an escape code.
+
+  A line number table is a sequence of bytes.  The default entry contains a line
+  number delta (-7..+7) in the high 4 bits and a pc delta (0..15) in the low 4 
+  bits. Special cases, including when one or both of the values is too large
+  to fit in 4 bits and other special cases are handled through escape entries.
+  Escape entries are identified by the value 0x8 in the high 4 bits.  The low 4
+  bits are occupied by a function code.  Some escape entries are followed by
+  additional arguments, which may be bytes, words, or longwords.  This data is
+  not aligned. 
+
+  The initial PC offset, file number and line number are zero.  Normally, the
+  table begins with a dst_ln_file escape which establishes the initial file
+  and line number.  All PC deltas are unsigned (thus the table is ordered by
+  increasing PC); line number deltas are signed.  The table ends with a 
+  dst_ln_end escape, which is followed by a final table entry whose PC delta
+  gives the code size of the last statement.
+
+  Escape     Semantic
+  ---------  ------------------------------------------------------------
+  file       Changes file state.  The current source file remains constant
+             until another file escape.  Though the line number state is
+             also updated by a file escape, a file escape does NOT 
+             constitute a line table entry.
+
+  statement  Alters the statement number of the next table entry.  By 
+             default, all table entries refer to the first statement on a
+             line.  Statement number one is the second statement, and so on.
+
+  entry      Identifies the next table entry as the position of an entry 
+             point for the current block.  The PC position should follow 
+             any procedure prologue code.  An argument specifies the entry
+             number, which is keyed to the entry number of the corresponding
+             .symbols ENTRY record.
+
+  exit       Identifies the next table entry as the last position within 
+             the current block before a procedure epiloge and subsequent
+             procedure exit.
+
+  gap        By default, the executable code corresponding to a table entry 
+             is assumed to extend to the beginning of the next table entry.
+             If this is not the case--there is a "hole" in the table--then
+             a gap escape should follow the first table entry to specify
+             where the code for that entry ends.
+*/
+
+#define dst_ln_escape_flag    -8    
+
+/*
+  Escape function codes:
+*/
+typedef enum
+    {
+    dst_ln_pad,          /* pad byte */
+    dst_ln_file,         /* file escape.  Next 4 bytes are a dst_src_loc_t */
+    dst_ln_dln1_dpc1,    /* 1 byte line delta, 1 byte pc delta */    
+    dst_ln_dln2_dpc2,    /* 2 bytes line delta, 2 bytes pc delta */
+    dst_ln_ln4_pc4,      /* 4 bytes ABSOLUTE line number, 4 bytes ABSOLUTE pc */
+    dst_ln_dln1_dpc0,    /* 1 byte line delta, pc delta = 0 */
+    dst_ln_ln_off_1,     /* statement escape, stmt # = 1 (2nd stmt on line) */
+    dst_ln_ln_off,       /* statement escape, stmt # = next byte */
+    dst_ln_entry,        /* entry escape, next byte is entry number */    
+    dst_ln_exit,         /* exit escape */
+    dst_ln_stmt_end,     /* gap escape, 4 bytes pc delta */
+    dst_ln_escape_11,    /* reserved */
+    dst_ln_escape_12,    /* reserved */
+    dst_ln_escape_13,    /* reserved */
+    dst_ln_nxt_byte,     /* next byte contains the real escape code */
+    dst_ln_end,          /* end escape, final entry follows */
+    dst_ln_escape_END_OF_ENUM
+    }    
+    dst_ln_escape_t;
+
+/*
+  Line number table entry
+*/
+typedef union
+    {
+    struct
+        {
+        unsigned int    ln_delta : 4;           /* 4 bit line number delta */
+        unsigned int    pc_delta : 4;           /* 4 bit pc delta */
+        }
+        delta;
+    
+    struct
+        {
+        unsigned int    esc_flag : 4;       /* alias for ln_delta */
+        dst_ln_escape_t esc_code : 4;       /* escape function code */
+        }
+        esc;
+    
+    char               sdata;                  /* signed data byte */    
+    unsigned char      udata;                  /* unsigned data byte */
+    }
+    dst_ln_entry_t,
+    *dst_ln_entry_ptr_t,
+    dst_ln_table_t[dst_dummy_array_size];
+
+/* The following macro will extract the ln_delta field as a signed value:
+*/
+#define dst_ln_ln_delta(ln_rec) \
+    ( ((short) ((ln_rec).delta.ln_delta << 12)) >> 12 )
+
+
+
+
+typedef struct dst_sec_struct {
+	char	*buffer;
+	long	position;
+	long	size;
+	long	base;
+} dst_sec;
+
+
+/* Macros for access to the data */
+
+#define DST_comp_unit(x) 	((x)->rec_data.comp_unit_)
+#define DST_section_tab(x) 	((x)->rec_data.section_tab_)
+#define DST_file_tab(x) 	((x)->rec_data.file_tab_)
+#define DST_block(x) 		((x)->rec_data.block_)
+#define	DST_var(x)		((x)->rec_data.var_)
+#define DST_pointer(x) 		((x)->rec_data.pointer_)
+#define DST_array(x) 		((x)->rec_data.array_)
+#define DST_subrange(x) 	((x)->rec_data.subrange_)
+#define DST_set(x)	 	((x)->rec_data.set_)
+#define DST_implicit_enum(x) 	((x)->rec_data.implicit_enum_)
+#define DST_explicit_enum(x) 	((x)->rec_data.explicit_enum_)
+#define DST_short_rec(x) 	((x)->rec_data.record_)
+#define DST_short_union(x) 	((x)->rec_data.record_)
+#define DST_file(x) 		((x)->rec_data.file_)
+#define DST_offset(x) 		((x)->rec_data.offset_)
+#define DST_alias(x)	 	((x)->rec_data.alias_)
+#define DST_signature(x) 	((x)->rec_data.signature_)
+#define DST_old_label(x) 	((x)->rec_data.old_label_)
+#define DST_scope(x) 		((x)->rec_data.scope_)
+#define DST_string_tab(x) 	((x)->rec_data.string_tab_)
+#define DST_global_name_tab(x) 	((x)->rec_data.string_tab_)
+#define DST_forward(x) 		((x)->rec_data.forward_)
+#define DST_aux_size(x) 	((x)->rec_data.aux_size_)
+#define DST_aux_align(x) 	((x)->rec_data.aux_align_)
+#define DST_aux_field_size(x) 	((x)->rec_data.aux_field_size_)
+#define DST_aux_field_off(x) 	((x)->rec_data.aux_field_off_)
+#define DST_aux_field_align(x) 	((x)->rec_data.aux_field_align_)
+#define DST_aux_qual(x) 	((x)->rec_data.aux_qual_)
+#define DST_aux_var_bound(x) 	((x)->rec_data.aux_var_bound_)
+#define DST_extension(x) 	((x)->rec_data.extension_)
+#define DST_string(x) 		((x)->rec_data.string_)
+#define DST_const(x) 		((x)->rec_data.const_)
+#define DST_reference(x) 	((x)->rec_data.pointer_)
+#define DST_record(x) 		((x)->rec_data.record_)
+#define DST_union(x) 		((x)->rec_data.record_)
+#define DST_aux_type_deriv(x) 	((x)->rec_data.aux_type_deriv_)
+#define DST_locpool(x) 		((x)->rec_data.string_tab_)
+#define DST_variable(x) 	((x)->rec_data.variable_)
+#define DST_label(x) 		((x)->rec_data.label_)
+#define DST_entry(x) 		((x)->rec_data.entry_)
+#define DST_aux_lifetime(x) 	((x)->rec_data.aux_lifetime_)
+#define DST_aux_ptr_base(x) 	((x)->rec_data.aux_ptr_base_)
+#define DST_aux_src_range(x) 	((x)->rec_data.aux_src_range_)
+#define DST_aux_reg_val(x) 	((x)->rec_data.aux_reg_val_)
+#define DST_aux_unit_names(x) 	((x)->rec_data.aux_unit_names_)
+#define DST_aux_sect_info(x) 	((x)->rec_data.aux_sect_info_)
+
+
+/*
+ * Type codes for loc strings. I'm not entirely certain about all of
+ * these, but they seem to work.
+ *				troy@cbme.unsw.EDU.AU
+ * If you find a variable whose location can't be decoded, you should
+ * find out it's code using "dstdump -s filename". It will record an
+ * entry for the variable, and give a text representation of what
+ * the locstring means. Before that explaination there will be a
+ * number. In the LOCSTRING table, that number will appear before
+ * the start of the location string. Location string codes are
+ * five bit codes with a 3 bit argument. Check the high 5 bits of
+ * the one byte code, and figure out where it goes in here.
+ * Then figure out exactly what the meaning is and code it in
+ * dstread.c
+ *
+ * Note that ranged locs mean that the variable is in different locations
+ * depending on the current PC. We ignore these because (a) gcc can't handle
+ * them, and (b), If you don't use high levels of optimisation they won't
+ * occur.
+ */
+typedef enum
+{
+	dst_lsc_end,		/* End of string */
+	dst_lsc_indirect,	/* Indirect through previous. Arg == 6 */
+				/* Or register ax (x=arg) */
+	dst_lsc_dreg,		/* register dx (x=arg) */
+	dst_lsc_03,
+	dst_lsc_section,	/* Section (arg+1) */
+	dst_lsc_05,
+	dst_lsc_06,
+	dst_lsc_add,		/* Add (arg+1)*2 */
+	dst_lsc_sub,		/* Subtract (arg+1)*2 */
+	dst_lsc_09,
+	dst_lsc_0a,
+	dst_lsc_sec_byte,	/* Section of next byte+1 */
+	dst_lsc_add_byte,	/* Add next byte (arg == 5) or next word
+				 * (arg == 6)
+				 */
+	dst_lsc_sub_byte,	/* Subtract next byte. (arg == 1) or next
+				 * word (arg == 6 ?)
+				 */
+	dst_lsc_sbreg,		/* Stack base register (frame pointer). Arg==0*/
+	dst_lsc_0f,
+	dst_lsc_ranged,		/* location is pc dependent */
+	dst_lsc_11,
+	dst_lsc_12,
+	dst_lsc_13,
+	dst_lsc_14,
+	dst_lsc_15,
+	dst_lsc_16,
+	dst_lsc_17,
+	dst_lsc_18,
+	dst_lsc_19,
+	dst_lsc_1a,
+	dst_lsc_1b,
+	dst_lsc_1c,
+	dst_lsc_1d,
+	dst_lsc_1e,
+	dst_lsc_1f
+} dst_loc_string_code_t;
+
+/* If the following occurs after an addition/subtraction, that addition
+ * or subtraction should be multiplied by 256. It's a complete byte, not
+ * a code.
+ */
+
+#define	dst_multiply_256	((char) 0x73)
+
+typedef struct
+{
+	char	code : 5;
+	char	arg : 3;
+} dst_loc_header_t ALIGNED1;
+
+typedef union
+{
+	dst_loc_header_t header;
+	char	data;
+} dst_loc_entry_t ALIGNED1;
+
+#undef ALIGNED1
+#endif  /* apollo_dst_h */
diff --git a/gdb/dstread.c b/gdb/dstread.c
new file mode 100644
index 0000000..d23f9f6
--- /dev/null
+++ b/gdb/dstread.c
@@ -0,0 +1,1665 @@
+/* Read apollo DST symbol tables and convert to internal format, for GDB.
+   Contributed by Troy Rollo, University of NSW (troy@cbme.unsw.edu.au).
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "breakpoint.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "obstack.h"
+
+#include "gdb_string.h"
+
+#include "dst.h"
+
+CORE_ADDR cur_src_start_addr, cur_src_end_addr;
+dst_sec	blocks_info, lines_info, symbols_info;
+
+/* Vector of line number information.  */
+
+static struct linetable *line_vector;
+
+/* Index of next entry to go in line_vector_index.  */
+
+static int line_vector_index;
+
+/* Last line number recorded in the line vector.  */
+
+static int prev_line_number;
+
+/* Number of elements allocated for line_vector currently.  */
+
+static int line_vector_length;
+
+static int
+init_dst_sections PARAMS ((int));
+
+static void
+read_dst_symtab PARAMS ((struct objfile *));
+
+static void
+find_dst_sections PARAMS ((bfd *, sec_ptr, PTR));
+
+static void
+dst_symfile_init PARAMS ((struct objfile *));
+
+static void
+dst_new_init PARAMS ((struct objfile *));
+
+static void
+dst_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+dst_symfile_finish PARAMS ((struct objfile *));
+
+static void
+dst_end_symtab PARAMS ((struct objfile *));
+
+static void
+complete_symtab PARAMS ((char *, CORE_ADDR, unsigned int));
+
+static void
+dst_start_symtab PARAMS ((void));
+
+static void
+dst_record_line PARAMS ((int, CORE_ADDR));
+
+/* Manage the vector of line numbers.  */
+/* FIXME: Use record_line instead.  */
+
+static void
+dst_record_line (line, pc)
+     int line;
+     CORE_ADDR pc;
+{
+  struct linetable_entry *e;
+  /* Make sure line vector is big enough.  */
+
+  if (line_vector_index + 2 >= line_vector_length)
+    {
+      line_vector_length *= 2;
+      line_vector = (struct linetable *)
+	xrealloc ((char *) line_vector, sizeof (struct linetable)
+		  + (line_vector_length
+		     * sizeof (struct linetable_entry)));
+    }
+
+  e = line_vector->item + line_vector_index++;
+  e->line = line; e->pc = pc;
+}
+
+/* Start a new symtab for a new source file.
+   It indicates the start of data for one original source file.  */
+/* FIXME: use start_symtab, like coffread.c now does.  */
+
+static void
+dst_start_symtab ()
+{
+  /* Initialize the source file line number information for this file.  */
+
+  if (line_vector)		/* Unlikely, but maybe possible? */
+    free ((PTR)line_vector);
+  line_vector_index = 0;
+  line_vector_length = 1000;
+  prev_line_number = -2;	/* Force first line number to be explicit */
+  line_vector = (struct linetable *)
+    xmalloc (sizeof (struct linetable)
+	     + line_vector_length * sizeof (struct linetable_entry));
+}
+
+/* Save the vital information from when starting to read a file,
+   for use when closing off the current file.
+   NAME is the file name the symbols came from, START_ADDR is the first
+   text address for the file, and SIZE is the number of bytes of text.  */
+
+static void
+complete_symtab (name, start_addr, size)
+    char *name;
+    CORE_ADDR start_addr;
+    unsigned int size;
+{
+  last_source_file = savestring (name, strlen (name));
+  cur_src_start_addr = start_addr;
+  cur_src_end_addr = start_addr + size;
+
+  if (current_objfile -> ei.entry_point >= cur_src_start_addr &&
+      current_objfile -> ei.entry_point <  cur_src_end_addr)
+    {
+      current_objfile -> ei.entry_file_lowpc = cur_src_start_addr;
+      current_objfile -> ei.entry_file_highpc = cur_src_end_addr;
+    }
+}
+
+/* Finish the symbol definitions for one main source file,
+   close off all the lexical contexts for that file
+   (creating struct block's for them), then make the
+   struct symtab for that file and put it in the list of all such. */
+/* FIXME: Use end_symtab, like coffread.c now does.  */
+
+static void
+dst_end_symtab (objfile)
+     struct objfile *objfile;
+{
+  register struct symtab *symtab;
+  register struct blockvector *blockvector;
+  register struct linetable *lv;
+
+  /* Create the blockvector that points to all the file's blocks.  */
+
+  blockvector = make_blockvector (objfile);
+
+  /* Now create the symtab object for this source file.  */
+  symtab = allocate_symtab (last_source_file, objfile);
+
+  /* Fill in its components.  */
+  symtab->blockvector = blockvector;
+  symtab->free_code = free_linetable;
+  symtab->free_ptr = 0;
+  symtab->filename = last_source_file;
+  symtab->dirname = NULL;
+  symtab->debugformat = obsavestring ("Apollo DST", 10,
+				      &objfile -> symbol_obstack);
+  lv = line_vector;
+  lv->nitems = line_vector_index;
+  symtab->linetable = (struct linetable *)
+    xrealloc ((char *) lv, (sizeof (struct linetable)
+		   + lv->nitems * sizeof (struct linetable_entry)));
+
+  free_named_symtabs (symtab->filename);
+
+  /* Reinitialize for beginning of new file. */
+  line_vector = 0;
+  line_vector_length = -1;
+  last_source_file = NULL;
+}
+
+/* dst_symfile_init ()
+   is the dst-specific initialization routine for reading symbols.
+
+   We will only be called if this is a DST or DST-like file.
+   BFD handles figuring out the format of the file, and code in symtab.c
+   uses BFD's determination to vector to us.
+
+   The ultimate result is a new symtab (or, FIXME, eventually a psymtab).  */
+
+static void
+dst_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  asection	*section;
+  bfd *abfd = objfile->obfd;
+
+  init_entry_point_info (objfile);
+
+}
+
+/* This function is called for every section; it finds the outer limits
+   of the line table (minimum and maximum file offset) so that the
+   mainline code can read the whole thing for efficiency.  */
+
+/* ARGSUSED */
+static void
+find_dst_sections (abfd, asect, vpinfo)
+     bfd *abfd;
+     sec_ptr asect;
+     PTR vpinfo;
+{
+  int size, count;
+  long base;
+  file_ptr offset, maxoff;
+  dst_sec *section;
+
+/* WARNING WILL ROBINSON!  ACCESSING BFD-PRIVATE DATA HERE!  FIXME!  */
+  size = asect->_raw_size;
+  offset = asect->filepos;
+  base = asect->vma;
+/* End of warning */
+
+  section = NULL;
+  if (!strcmp(asect->name, ".blocks"))
+    section = &blocks_info;
+  else if (!strcmp(asect->name, ".lines"))
+    section = &lines_info;
+  else if (!strcmp(asect->name, ".symbols"))
+    section = &symbols_info;
+  if (!section)
+    return;
+  section->size = size;
+  section->position = offset;
+  section->base = base;
+}
+
+
+/* The BFD for this file -- only good while we're actively reading
+   symbols into a psymtab or a symtab.  */
+
+static bfd *symfile_bfd;
+
+/* Read a symbol file, after initialization by dst_symfile_init.  */
+/* FIXME!  Addr and Mainline are not used yet -- this will not work for
+   shared libraries or add_file!  */
+
+/* ARGSUSED */
+static void
+dst_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile->obfd;
+  char *name = bfd_get_filename (abfd);
+  int desc;
+  register int val;
+  int num_symbols;
+  int symtab_offset;
+  int stringtab_offset;
+
+  symfile_bfd = abfd;			/* Kludge for swap routines */
+
+/* WARNING WILL ROBINSON!  ACCESSING BFD-PRIVATE DATA HERE!  FIXME!  */
+   desc = fileno ((FILE *)(abfd->iostream));	/* File descriptor */
+
+  /* Read the line number table, all at once.  */
+  bfd_map_over_sections (abfd, find_dst_sections, (PTR)NULL);
+
+  val = init_dst_sections (desc);
+  if (val < 0)
+    error ("\"%s\": error reading debugging symbol tables\n", name);
+
+  init_minimal_symbol_collection ();
+  make_cleanup (discard_minimal_symbols, 0);
+
+  /* Now that the executable file is positioned at symbol table,
+     process it and define symbols accordingly.  */
+
+  read_dst_symtab (objfile);
+
+  /* Sort symbols alphabetically within each block.  */
+
+  {
+    struct symtab *s;
+    for (s = objfile -> symtabs; s != NULL; s = s -> next)
+      {
+	sort_symtab_syms (s);
+      }
+  }
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+}
+
+static void
+dst_new_init (ignore)
+     struct objfile *ignore;
+{
+	/* Nothin' to do */
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+dst_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+    /* Nothing to do */
+}
+
+
+/* Get the next line number from the DST. Returns 0 when we hit an
+ * end directive or cannot continue for any other reason.
+ *
+ * Note that ordinary pc deltas are multiplied by two. Apparently
+ * this is what was really intended.
+ */
+static int
+get_dst_line(buffer, pc)
+    signed char **buffer;
+    long *pc;
+{
+	static last_pc = 0;
+	static long last_line = 0;
+	static int last_file = 0;
+	dst_ln_entry_ptr_t entry;
+	int size;
+	dst_src_loc_t *src_loc;
+
+	if (*pc != -1)
+	{
+		last_pc = *pc;
+		*pc = -1;
+	}
+	entry = (dst_ln_entry_ptr_t) *buffer;
+
+	while (dst_ln_ln_delta(*entry) == dst_ln_escape_flag)
+	{
+		switch(entry->esc.esc_code)
+		{
+		case dst_ln_pad:
+			size = 1;         /* pad byte */
+			break;
+		case dst_ln_file:
+		        /* file escape.  Next 4 bytes are a dst_src_loc_t */
+			size = 5;
+			src_loc = (dst_src_loc_t *) (*buffer + 1);
+			last_line = src_loc->line_number;
+			last_file = src_loc->file_index;
+			break;
+		case dst_ln_dln1_dpc1:
+			/* 1 byte line delta, 1 byte pc delta */    
+			last_line += (*buffer)[1];
+			last_pc += 2 * (unsigned char) (*buffer)[2];
+			dst_record_line(last_line, last_pc);
+			size = 3;
+			break;
+		case dst_ln_dln2_dpc2:
+			/* 2 bytes line delta, 2 bytes pc delta */
+			last_line += *(short *) (*buffer + 1);
+			last_pc += 2 * (*(short *) (*buffer + 3));
+			size = 5;
+			dst_record_line(last_line, last_pc);
+			break;
+		case dst_ln_ln4_pc4:
+			/* 4 bytes ABSOLUTE line number, 4 bytes ABSOLUTE pc */
+			last_line = *(unsigned long *) (*buffer + 1);
+			last_pc = *(unsigned long *) (*buffer + 5);
+			size = 9;
+			dst_record_line(last_line, last_pc);
+			break;
+		case dst_ln_dln1_dpc0:
+			/* 1 byte line delta, pc delta = 0 */
+			size = 2;
+			last_line+= (*buffer)[1];
+			break;
+		 case dst_ln_ln_off_1:
+			/* statement escape, stmt # = 1 (2nd stmt on line) */
+			size = 1;
+			break;
+		case dst_ln_ln_off:
+			/* statement escape, stmt # = next byte */
+			size = 2;
+			break;
+		case dst_ln_entry:
+			/* entry escape, next byte is entry number */    
+			size = 2;
+			break;
+		case dst_ln_exit:
+			/* exit escape */
+			size = 1;
+			break;
+		case dst_ln_stmt_end:
+			/* gap escape, 4 bytes pc delta */
+			size = 5;
+			/* last_pc += 2 * (*(long *) (*buffer + 1)); */
+			/* Apparently this isn't supposed to actually modify
+			 * the pc value. Totally weird.
+			 */
+			break;
+		 case dst_ln_escape_11:
+		 case dst_ln_escape_12:
+		 case dst_ln_escape_13:
+			size = 1;
+			break;
+		 case dst_ln_nxt_byte:
+			/* This shouldn't happen. If it does, we're SOL */
+			return 0;
+			break;
+		 case dst_ln_end:
+			/* end escape, final entry follows */
+			return 0;
+		}
+		*buffer += (size < 0) ? -size : size;
+		entry = (dst_ln_entry_ptr_t) *buffer;
+	}
+	last_line += dst_ln_ln_delta(*entry);
+	last_pc += entry->delta.pc_delta * 2;
+	(*buffer)++;
+	dst_record_line(last_line, last_pc);
+	return 1;
+}
+
+static	void
+enter_all_lines(buffer, address)
+    char *buffer;
+    long address;
+{
+    if (buffer)
+	while (get_dst_line(&buffer, &address));
+}
+
+static int
+get_dst_entry(buffer, ret_entry)
+    char *buffer;
+    dst_rec_ptr_t *ret_entry;
+{
+    int size;
+    dst_rec_ptr_t entry;
+    static int last_type;
+    int	ar_size;
+    static unsigned lu3;
+
+    entry = (dst_rec_ptr_t) buffer;
+    switch(entry->rec_type)
+    {
+    case dst_typ_pad:
+	size = 0;
+	break;
+    case dst_typ_comp_unit:
+	size = sizeof(DST_comp_unit(entry));
+	break;
+    case dst_typ_section_tab:
+	size = sizeof(DST_section_tab(entry))
+		+ ((int) DST_section_tab(entry).number_of_sections
+		   - dst_dummy_array_size) * sizeof(long);
+	break;
+    case dst_typ_file_tab:
+	size = sizeof(DST_file_tab(entry))
+		+ ((int) DST_file_tab(entry).number_of_files
+		   - dst_dummy_array_size) * sizeof(dst_file_desc_t);
+	break;
+    case dst_typ_block:
+	size = sizeof(DST_block(entry))
+		+ ((int) DST_block(entry).n_of_code_ranges
+		   - dst_dummy_array_size) * sizeof(dst_code_range_t);
+	break;
+    case dst_typ_5:
+	size = -1;
+	break;
+    case dst_typ_var:
+	size = sizeof(DST_var(entry)) -
+		sizeof(dst_var_loc_long_t) * dst_dummy_array_size +
+		DST_var(entry).no_of_locs *
+		( DST_var(entry).short_locs ?
+		  sizeof(dst_var_loc_short_t):
+		  sizeof(dst_var_loc_long_t));
+	break;
+    case dst_typ_pointer:
+	size = sizeof(DST_pointer(entry));
+	break;
+    case dst_typ_array:
+	size = sizeof(DST_array(entry));
+	break;
+    case dst_typ_subrange:
+	size = sizeof(DST_subrange(entry));
+	break;
+    case dst_typ_set:
+	size = sizeof(DST_set(entry));
+	break;
+    case dst_typ_implicit_enum:
+	size = sizeof(DST_implicit_enum(entry))
+		+ ((int) DST_implicit_enum(entry).nelems
+		   - dst_dummy_array_size) * sizeof(dst_rel_offset_t);
+	break;
+    case dst_typ_explicit_enum:
+	size = sizeof(DST_explicit_enum(entry))
+		+ ((int) DST_explicit_enum(entry).nelems
+		   - dst_dummy_array_size) * sizeof(dst_enum_elem_t);
+	break;
+    case dst_typ_short_rec:
+	size = sizeof(DST_short_rec(entry))
+		+ DST_short_rec(entry).nfields * sizeof(dst_short_field_t)
+		- dst_dummy_array_size * sizeof(dst_field_t);
+	break;
+    case dst_typ_short_union:
+	size = sizeof(DST_short_union(entry))
+		+ DST_short_union(entry).nfields * sizeof(dst_short_field_t)
+		- dst_dummy_array_size * sizeof(dst_field_t);
+	break;
+    case dst_typ_file:
+	size = sizeof(DST_file(entry));
+	break;
+    case dst_typ_offset:
+	size = sizeof(DST_offset(entry));
+	break;
+    case dst_typ_alias:
+	size = sizeof(DST_alias(entry));
+	break;
+    case dst_typ_signature:
+	size = sizeof(DST_signature(entry)) +
+		((int) DST_signature(entry).nargs -
+		 dst_dummy_array_size) * sizeof(dst_arg_t);
+	break;
+    case dst_typ_21:
+	size = -1;
+	break;
+    case dst_typ_old_label:
+	size = sizeof(DST_old_label(entry));
+	break;
+    case dst_typ_scope:
+	size = sizeof(DST_scope(entry));
+	break;
+    case dst_typ_end_scope:
+	size = 0;
+	break;
+    case dst_typ_25:
+    case dst_typ_26:
+	size = -1;
+	break;
+    case dst_typ_string_tab:
+    case dst_typ_global_name_tab:
+	size = sizeof(DST_string_tab(entry))
+		+ DST_string_tab(entry).length
+		- dst_dummy_array_size;
+	break;
+    case dst_typ_forward:
+	size = sizeof(DST_forward(entry));
+	get_dst_entry((char *) entry + DST_forward(entry).rec_off, &entry);
+	break;
+    case dst_typ_aux_size:
+	size = sizeof(DST_aux_size(entry));
+	break;
+    case dst_typ_aux_align:
+	size = sizeof(DST_aux_align(entry));
+	break;
+    case dst_typ_aux_field_size:
+	size = sizeof(DST_aux_field_size(entry));
+	break;
+    case dst_typ_aux_field_off:
+	size = sizeof(DST_aux_field_off(entry));
+	break;
+    case dst_typ_aux_field_align:
+	size = sizeof(DST_aux_field_align(entry));
+	break;
+    case dst_typ_aux_qual:
+	size = sizeof(DST_aux_qual(entry));
+	break;
+    case dst_typ_aux_var_bound:
+	size = sizeof(DST_aux_var_bound(entry));
+	break;
+    case dst_typ_extension:
+	size = DST_extension(entry).rec_size;
+	break;
+    case dst_typ_string:
+	size = sizeof(DST_string(entry));
+	break;
+    case dst_typ_old_entry:
+	size = 48; /* Obsolete entry type */
+	break;
+    case dst_typ_const:
+	size = sizeof(DST_const(entry))
+		+ DST_const(entry).value.length
+		- sizeof(DST_const(entry).value.val);
+	break;
+    case dst_typ_reference:
+	size = sizeof(DST_reference(entry));
+	break;
+    case dst_typ_old_record:
+    case dst_typ_old_union:
+    case dst_typ_record:
+    case dst_typ_union:
+	size = sizeof(DST_record(entry))
+		+ ((int) DST_record(entry).nfields
+		   - dst_dummy_array_size) * sizeof(dst_field_t);
+	break;
+    case dst_typ_aux_type_deriv:
+	size = sizeof(DST_aux_type_deriv(entry));
+	break;
+    case dst_typ_locpool:
+	size = sizeof(DST_locpool(entry))
+		+ ((int) DST_locpool(entry).length -
+		   dst_dummy_array_size);
+	break;
+    case dst_typ_variable:
+	size = sizeof(DST_variable(entry));
+	break;
+    case dst_typ_label:
+	size = sizeof(DST_label(entry));
+	break;
+    case dst_typ_entry:
+	size = sizeof(DST_entry(entry));
+	break;
+    case dst_typ_aux_lifetime:
+	size = sizeof(DST_aux_lifetime(entry));
+	break;
+    case dst_typ_aux_ptr_base:
+	size = sizeof(DST_aux_ptr_base(entry));
+	break;
+    case dst_typ_aux_src_range:
+	size = sizeof(DST_aux_src_range(entry));
+	break;
+    case dst_typ_aux_reg_val:
+	size = sizeof(DST_aux_reg_val(entry));
+	break;
+    case dst_typ_aux_unit_names:
+	size = sizeof(DST_aux_unit_names(entry))
+		+ ((int) DST_aux_unit_names(entry).number_of_names
+		   - dst_dummy_array_size) * sizeof(dst_rel_offset_t);
+	break;
+    case dst_typ_aux_sect_info:
+	size = sizeof(DST_aux_sect_info(entry))
+		+ ((int) DST_aux_sect_info(entry).number_of_refs
+		   - dst_dummy_array_size) * sizeof(dst_sect_ref_t);
+	break;
+    default:
+	size = -1;
+	break;
+    }
+    if (size == -1)
+    {
+	fprintf_unfiltered(gdb_stderr, "Warning: unexpected DST entry type (%d) found\nLast valid entry was of type: %d\n",
+		(int) entry->rec_type,
+		last_type);
+	fprintf_unfiltered(gdb_stderr, "Last unknown_3 value: %d\n", lu3);
+	size = 0;
+    }
+    else
+	last_type = entry->rec_type;
+    if (size & 1) /* Align on a word boundary */
+	size++;
+   size += 2;
+   *ret_entry = entry;
+   return size;
+}
+
+static	int next_dst_entry(buffer, entry, table)
+    char **buffer;
+    dst_rec_ptr_t *entry;
+    dst_sec *table;
+{
+    if (*buffer - table->buffer >= table->size)
+    {
+	*entry = NULL;
+	return 0;
+    }
+    *buffer += get_dst_entry(*buffer, entry);
+    return 1;
+}
+
+#define NEXT_BLK(a, b) next_dst_entry(a, b, &blocks_info)
+#define NEXT_SYM(a, b) next_dst_entry(a, b, &symbols_info)
+#define	DST_OFFSET(a, b) ((char *) (a) + (b))
+
+static	dst_rec_ptr_t	section_table = NULL;
+
+char *
+get_sec_ref(ref)
+    dst_sect_ref_t *ref;
+{
+	dst_sec *section = NULL;
+	long offset;
+
+	if (!section_table || !ref->sect_index)
+		return NULL;
+	offset = DST_section_tab(section_table).section_base[ref->sect_index-1]
+		+ ref->sect_offset;
+	if (offset >= blocks_info.base &&
+	    offset < blocks_info.base + blocks_info.size)
+		section = &blocks_info;
+	else if (offset >= symbols_info.base &&
+		 offset < symbols_info.base + symbols_info.size)
+		section = &symbols_info;
+	else if (offset >= lines_info.base &&
+		 offset < lines_info.base + lines_info.size)
+		section = &lines_info;
+	if (!section)
+		return NULL;
+	return section->buffer + (offset - section->base);
+}
+
+CORE_ADDR
+dst_get_addr(int section, long offset)
+{
+	if (!section_table || !section)
+		return 0;
+	return DST_section_tab(section_table).section_base[section-1] + offset;
+}
+
+CORE_ADDR
+dst_sym_addr(ref)
+    dst_sect_ref_t *ref;
+{
+	if (!section_table || !ref->sect_index)
+		return 0;
+	return DST_section_tab(section_table).section_base[ref->sect_index-1]
+		+ ref->sect_offset;
+}
+
+static struct type *
+create_new_type(objfile)
+    struct objfile *objfile;
+{
+	struct type *type;
+
+	type = (struct type *)
+		obstack_alloc (&objfile->symbol_obstack, sizeof (struct type));
+	memset(type, 0, sizeof(struct type));
+	return type;
+}
+
+static struct symbol *
+create_new_symbol(objfile, name)
+    struct objfile *objfile;
+    char *name;
+{
+	struct symbol *sym = (struct symbol *)
+	       obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol));
+	memset (sym, 0, sizeof (struct symbol));
+	SYMBOL_NAME (sym) = obsavestring (name, strlen (name),
+					  &objfile->symbol_obstack);
+	SYMBOL_VALUE (sym) = 0;
+	SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+
+	SYMBOL_CLASS (sym) = LOC_BLOCK;
+	return sym;
+};
+
+static struct type *
+decode_dst_type PARAMS ((struct objfile *, dst_rec_ptr_t));
+
+static struct type *
+decode_type_desc(objfile, type_desc, base)
+	struct objfile *objfile;
+	dst_type_t *type_desc;
+	dst_rec_ptr_t base;
+{
+	struct type *type;
+	dst_rec_ptr_t entry;
+	if (type_desc->std_type.user_defined_type)
+	{
+		entry = (dst_rec_ptr_t) DST_OFFSET(base,
+					dst_user_type_offset(*type_desc));
+		type = decode_dst_type(objfile, entry);
+	}
+	else
+	{
+		switch(type_desc->std_type.dtc)
+		{
+		case dst_int8_type:
+			type = builtin_type_signed_char;
+			break;
+		case dst_int16_type:
+			type = builtin_type_short;
+			break;
+		case dst_int32_type:
+			type = builtin_type_long;
+			break;
+		case dst_uint8_type:
+			type = builtin_type_unsigned_char;
+			break;
+		case dst_uint16_type:
+			type = builtin_type_unsigned_short;
+			break;
+		case dst_uint32_type:
+			type = builtin_type_unsigned_long;
+			break;
+		case dst_real32_type:
+			type = builtin_type_float;
+			break;
+		case dst_real64_type:
+			type = builtin_type_double;
+			break;
+		case dst_complex_type:
+			type = builtin_type_complex;
+			break;
+		case dst_dcomplex_type:
+			type = builtin_type_double_complex;
+			break;
+		case dst_bool8_type:
+			type = builtin_type_char;
+			break;
+		case dst_bool16_type:
+			type = builtin_type_short;
+			break;
+		case dst_bool32_type:
+			type = builtin_type_long;
+			break;
+		case dst_char_type:
+			type = builtin_type_char;
+			break;
+		/* The next few are more complex. I will take care
+		 * of them properly at a later point.
+		 */
+		case dst_string_type:
+			type = builtin_type_void;
+			break;
+		case dst_ptr_type:
+			type = builtin_type_void;
+			break;
+		case dst_set_type:
+			type = builtin_type_void;
+			break;
+		case dst_proc_type:
+			type = builtin_type_void;
+			break;
+		case dst_func_type:
+			type = builtin_type_void;
+			break;
+		/* Back tto some ordinary ones */
+		case dst_void_type:
+			type = builtin_type_void;
+			break;
+		case dst_uchar_type:
+			type = builtin_type_unsigned_char;
+			break;
+		default:
+			type = builtin_type_void;
+			break;
+		}
+	} 
+	return type;
+}
+
+struct	structure_list
+    {
+    struct structure_list *next;
+    struct type *type;
+    };
+
+static struct structure_list *struct_list = NULL;
+
+static struct type *
+find_dst_structure(name)
+    char *name;
+{
+	struct structure_list *element;
+
+	for (element = struct_list; element; element = element->next)
+		if (!strcmp(name, TYPE_NAME(element->type)))
+			return element->type;
+	return NULL;
+}
+
+
+static struct type *
+decode_dst_structure(objfile, entry, code, version)
+    struct objfile *objfile;
+    dst_rec_ptr_t entry;
+    int code;
+    int version;
+{
+	struct	type *type, *child_type;
+	char	*struct_name;
+	char	*name, *field_name;
+	int	i;
+	int	fieldoffset, fieldsize;
+	dst_type_t type_desc;
+	struct structure_list *element;
+
+	struct_name = DST_OFFSET(entry, DST_record(entry).noffset);
+	name = concat( (code == TYPE_CODE_UNION)?"union ":"struct ",
+			struct_name, NULL);
+	type = find_dst_structure(name);
+	if (type)
+	{
+		free((PTR) name);
+		return type;
+	}
+	type = create_new_type(objfile);
+	TYPE_NAME(type) = obstack_copy0 (&objfile->symbol_obstack,
+						name, strlen(name));
+	free((PTR) name);
+	TYPE_CODE(type) = code;
+	TYPE_LENGTH(type) = DST_record(entry).size;
+	TYPE_NFIELDS(type) = DST_record(entry).nfields;
+	TYPE_FIELDS(type) = (struct field *)
+	       obstack_alloc (&objfile->symbol_obstack, sizeof (struct field) *
+					DST_record(entry).nfields);
+	fieldoffset = fieldsize = 0;
+	INIT_CPLUS_SPECIFIC(type);
+	element = (struct structure_list *)
+				xmalloc(sizeof(struct structure_list));
+	element->type = type;
+	element->next = struct_list;
+	struct_list = element;
+	for (i = 0; i < DST_record(entry).nfields; i++)
+	{
+		switch (version)
+		{
+		case 2:
+			field_name = DST_OFFSET(entry,
+					DST_record(entry).f.ofields[i].noffset);
+			fieldoffset = DST_record(entry).f.ofields[i].foffset*8 +
+				      DST_record(entry).f.ofields[i].bit_offset;
+			fieldsize = DST_record(entry).f.ofields[i].size;
+			type_desc = DST_record(entry).f.ofields[i].type_desc;
+			break;
+		case 1:
+			field_name = DST_OFFSET(entry,
+					DST_record(entry).f.fields[i].noffset);
+			type_desc = DST_record(entry).f.fields[i].type_desc;
+			switch(DST_record(entry).f.fields[i].f.field_loc.format_tag)
+			{
+			case dst_field_byte:
+				fieldoffset = DST_record(entry).f.
+					fields[i].f.field_byte.offset * 8;
+				fieldsize = -1;
+				break;
+			case dst_field_bit:
+				fieldoffset = DST_record(entry).f.
+					fields[i].f.field_bit.byte_offset * 8 +
+					      DST_record(entry).f.
+					fields[i].f.field_bit.bit_offset;
+				fieldsize = DST_record(entry).f.
+					fields[i].f.field_bit.nbits;
+				break;
+			case dst_field_loc:
+				fieldoffset += fieldsize;
+				fieldsize = -1;
+				break;
+			}
+			break;
+		case 0:
+			field_name = DST_OFFSET(entry,
+					DST_record(entry).f.sfields[i].noffset);
+			fieldoffset = DST_record(entry).f.sfields[i].foffset;
+			type_desc = DST_record(entry).f.sfields[i].type_desc;
+			if (i < DST_record(entry).nfields - 1)
+				fieldsize = DST_record(entry).f.sfields[i+1].foffset;
+			else
+				fieldsize = DST_record(entry).size;
+			fieldsize -= fieldoffset;
+			fieldoffset *= 8;
+			fieldsize *= 8;
+		}
+		TYPE_FIELDS(type)[i].name = 
+			obstack_copy0 (&objfile->symbol_obstack,
+						field_name, strlen(field_name));
+		TYPE_FIELDS(type)[i].type = decode_type_desc(objfile,
+						&type_desc,
+						entry);
+		if (fieldsize == -1)
+			fieldsize = TYPE_LENGTH(TYPE_FIELDS(type)[i].type) *
+					8;
+		TYPE_FIELDS(type)[i].bitsize = fieldsize;
+		TYPE_FIELDS(type)[i].bitpos = fieldoffset;
+	}
+	return type;
+}
+
+static struct type *
+decode_dst_type(objfile, entry)
+    struct objfile *objfile;
+    dst_rec_ptr_t entry;
+{
+	struct type *child_type, *type, *range_type, *index_type;
+
+	switch(entry->rec_type)
+	{
+	case dst_typ_var:
+		return decode_type_desc(objfile,
+				 	&DST_var(entry).type_desc,
+					entry);
+		break;
+	case dst_typ_variable:
+		return decode_type_desc(objfile,
+				 	&DST_variable(entry).type_desc,
+					entry);
+		break;
+	case dst_typ_short_rec:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_STRUCT,0);
+	case dst_typ_short_union:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_UNION, 0);
+	case dst_typ_union:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_UNION, 1);
+	case dst_typ_record:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_STRUCT,1);
+	case dst_typ_old_union:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_UNION, 2);
+	case dst_typ_old_record:
+		return decode_dst_structure(objfile, entry, TYPE_CODE_STRUCT,2);
+	case dst_typ_pointer:
+		return make_pointer_type(
+				decode_type_desc(objfile,
+					&DST_pointer(entry).type_desc,
+					entry),
+				NULL);
+	case dst_typ_array:
+		child_type = decode_type_desc(objfile,
+					     &DST_pointer(entry).type_desc,
+					     entry);
+		index_type = lookup_fundamental_type(objfile,
+							FT_INTEGER);
+		range_type = create_range_type ((struct type *) NULL,
+				index_type, DST_array(entry).lo_bound,
+					DST_array(entry).hi_bound);
+		return create_array_type ((struct type *) NULL, child_type,
+					range_type);
+	case dst_typ_alias:
+		return decode_type_desc(objfile,
+					&DST_alias(entry).type_desc,
+					entry);
+	default:
+		return builtin_type_int;
+	}
+}
+
+struct	symbol_list {
+	struct symbol_list *next;
+	struct symbol *symbol;
+};
+
+static	struct	symbol_list *dst_global_symbols = NULL;
+static	int	total_globals = 0;
+
+static void
+decode_dst_locstring(locstr, sym)
+    char *locstr;
+    struct symbol *sym;
+{
+	dst_loc_entry_t *entry, *next_entry;
+	CORE_ADDR	temp;
+	int count = 0;
+
+	while(1)
+	{
+		if (count++ == 100)
+		{
+			fprintf_unfiltered(gdb_stderr, "Error reading locstring\n");
+			break;
+		}
+		entry = (dst_loc_entry_t *) locstr;
+		next_entry = (dst_loc_entry_t *) (locstr + 1);
+		switch (entry->header.code)
+		{
+		case dst_lsc_end:	/* End of string */
+			return;
+		case dst_lsc_indirect:/* Indirect through previous. Arg == 6 */
+					/* Or register ax x == arg */
+			if (entry->header.arg < 6)
+			{
+				SYMBOL_CLASS(sym) = LOC_REGISTER;
+				SYMBOL_VALUE(sym) = entry->header.arg + 8;
+			}
+			/* We predict indirects */
+			locstr++;
+			break;
+		case dst_lsc_dreg:
+			SYMBOL_CLASS(sym) = LOC_REGISTER;
+			SYMBOL_VALUE(sym) = entry->header.arg;
+			locstr++;
+			break;
+		case dst_lsc_section:/* Section (arg+1) */
+			SYMBOL_VALUE(sym) = dst_get_addr(entry->header.arg+1, 0);
+			locstr++;
+			break;
+		case dst_lsc_sec_byte: /* Section (next_byte+1) */
+			SYMBOL_VALUE(sym) = dst_get_addr(locstr[1]+1, 0);
+			locstr+=2;
+			break;
+		case dst_lsc_add:	/* Add (arg+1)*2 */
+		case dst_lsc_sub:	/* Subtract (arg+1)*2 */
+			temp = (entry->header.arg + 1) * 2;
+			locstr++;
+			if (*locstr == dst_multiply_256)
+			{
+				temp <<= 8;
+				locstr++;
+			}
+			switch(entry->header.code)
+			{
+			case dst_lsc_add:
+				if (SYMBOL_CLASS(sym) == LOC_LOCAL)
+					SYMBOL_CLASS(sym) = LOC_ARG;
+				SYMBOL_VALUE(sym) += temp;
+				break;
+			case dst_lsc_sub:
+				SYMBOL_VALUE(sym) -= temp;
+				break;
+			}
+			break;
+		case dst_lsc_add_byte:
+		case dst_lsc_sub_byte:
+			switch (entry->header.arg & 0x03)
+			{
+			case 1:
+				temp = (unsigned char) locstr[1];
+				locstr += 2;
+				break;
+			case 2:
+				temp = * (unsigned short *) (locstr + 1);
+				locstr += 3;
+				break;
+			case 3:
+				temp = * (unsigned long *) (locstr + 1);
+				locstr += 5;
+				break;
+			}
+			if (*locstr == dst_multiply_256)
+			{
+				temp <<= 8;
+				locstr++;
+			}
+			switch(entry->header.code)
+			{
+			case dst_lsc_add_byte:
+				if (SYMBOL_CLASS(sym) == LOC_LOCAL)
+					SYMBOL_CLASS(sym) = LOC_ARG;
+				SYMBOL_VALUE(sym) += temp;
+				break;
+			case dst_lsc_sub_byte:
+				SYMBOL_VALUE(sym) -= temp;
+				break;
+			}
+			break;
+		case dst_lsc_sbreg:	/* Stack base register (frame pointer). Arg==0*/
+			if (next_entry->header.code != dst_lsc_indirect)
+			{
+				SYMBOL_VALUE(sym) = 0;
+				SYMBOL_CLASS(sym) = LOC_STATIC;
+				return;
+			}
+			SYMBOL_VALUE(sym) = 0;
+			SYMBOL_CLASS(sym) = LOC_LOCAL;
+			locstr++;
+			break;
+		default:
+			SYMBOL_VALUE(sym) = 0;
+			SYMBOL_CLASS(sym) = LOC_STATIC;
+			return;
+		}
+	}
+}
+
+static struct symbol_list *
+process_dst_symbols(objfile, entry, name, nsyms_ret)
+    struct objfile *objfile;
+    dst_rec_ptr_t entry;
+    char *name;
+    int *nsyms_ret;
+{
+	struct symbol_list *list = NULL, *element;
+	struct symbol *sym;
+	char *symname;
+	int nsyms = 0;
+	char *location;
+	long line;
+	dst_type_t symtype;
+	struct type *type;
+	dst_var_attr_t attr;
+	dst_var_loc_t loc_type;
+	unsigned loc_index;
+	long	loc_value;
+
+	if (!entry)
+	{
+		*nsyms_ret = 0;
+		return NULL;
+	}
+	location = (char *) entry;
+	while (NEXT_SYM(&location, &entry) &&
+	       entry->rec_type != dst_typ_end_scope)
+	{
+		if (entry->rec_type == dst_typ_var)
+		{
+			if (DST_var(entry).short_locs)
+			{
+				loc_type = DST_var(entry).locs.shorts[0].loc_type;
+				loc_index = DST_var(entry).locs.shorts[0].loc_index;
+				loc_value = DST_var(entry).locs.shorts[0].location;
+			}
+			else
+			{
+				loc_type = DST_var(entry).locs.longs[0].loc_type;
+				loc_index = DST_var(entry).locs.longs[0].loc_index;
+				loc_value = DST_var(entry).locs.longs[0].location;
+			}
+			if (loc_type == dst_var_loc_external)
+				continue;
+			symname = DST_OFFSET(entry, DST_var(entry).noffset);
+			line = DST_var(entry).src_loc.line_number;
+			symtype = DST_var(entry).type_desc;
+			attr = DST_var(entry).attributes;
+		}
+		else if (entry->rec_type == dst_typ_variable)
+		{
+			symname = DST_OFFSET(entry,
+						DST_variable(entry).noffset);
+			line = DST_variable(entry).src_loc.line_number;
+			symtype = DST_variable(entry).type_desc;
+			attr = DST_variable(entry).attributes;
+		}
+		else
+		{
+			continue;
+		}
+		if (symname && name && !strcmp(symname, name))
+			/* It's the function return value */
+			continue;
+		sym = create_new_symbol(objfile, symname);
+
+		if ((attr & (1<<dst_var_attr_global)) ||
+		    (attr & (1<<dst_var_attr_static)))
+			SYMBOL_CLASS(sym) = LOC_STATIC;
+		else
+			SYMBOL_CLASS(sym) = LOC_LOCAL;
+		SYMBOL_LINE(sym) = line;
+		SYMBOL_TYPE(sym) = decode_type_desc(objfile, &symtype,
+						entry);
+		SYMBOL_VALUE(sym) = 0;
+		switch (entry->rec_type)
+		{
+		case dst_typ_var:
+			switch(loc_type)
+			{
+			case dst_var_loc_abs:
+				SYMBOL_VALUE_ADDRESS(sym) = loc_value;
+				break;
+			case dst_var_loc_sect_off:
+			case dst_var_loc_ind_sect_off: /* What is this? */
+				SYMBOL_VALUE_ADDRESS(sym) = dst_get_addr(
+						loc_index,
+						loc_value);
+				break;
+			case dst_var_loc_ind_reg_rel: /* What is this? */
+			case dst_var_loc_reg_rel:
+				/* If it isn't fp relative, specify the
+				 * register it's relative to.
+				 */
+				if (loc_index)
+				{
+					sym->aux_value.basereg = loc_index;
+				}
+				SYMBOL_VALUE(sym) = loc_value;
+				if (loc_value > 0 &&
+				    SYMBOL_CLASS(sym) == LOC_BASEREG)
+					SYMBOL_CLASS(sym) = LOC_BASEREG_ARG;
+				break;
+			case dst_var_loc_reg:
+				SYMBOL_VALUE(sym) = loc_index;
+				SYMBOL_CLASS(sym) = LOC_REGISTER;
+				break;
+			}
+			break;
+		case dst_typ_variable:
+			/* External variable..... don't try to interpret
+			 * its nonexistant locstring.
+			 */
+			if (DST_variable(entry).loffset == -1)
+				continue;
+			decode_dst_locstring(DST_OFFSET(entry,
+						DST_variable(entry).loffset),
+					     sym);
+		}
+		element = (struct symbol_list *)
+				xmalloc(sizeof(struct symbol_list));
+		
+		if (attr & (1<<dst_var_attr_global))
+		{
+			element->next = dst_global_symbols;
+			dst_global_symbols = element;
+			total_globals++;
+		}
+		else
+		{
+			element->next = list;
+			list = element;
+			nsyms++;
+		}
+		element->symbol = sym;
+	}
+	*nsyms_ret = nsyms;
+	return list;
+}
+
+
+static struct symbol *
+process_dst_function(objfile, entry, name, address)
+    struct objfile *objfile;
+    dst_rec_ptr_t entry;
+    char *name;
+    CORE_ADDR address;
+{
+	struct	symbol *sym;
+	struct	type *type, *ftype;
+	dst_rec_ptr_t sym_entry, typ_entry;
+	char *location;
+	struct symbol_list *element;
+
+	type = builtin_type_int;
+	sym = create_new_symbol(objfile, name);
+	SYMBOL_CLASS(sym) = LOC_BLOCK;
+
+	if (entry)
+	{
+		location = (char *) entry;
+		do
+		{
+			NEXT_SYM(&location, &sym_entry);
+		} while (sym_entry && sym_entry->rec_type != dst_typ_signature);
+
+		if (sym_entry)
+		{
+			SYMBOL_LINE(sym) =
+				DST_signature(sym_entry).src_loc.line_number;
+			if (DST_signature(sym_entry).result)
+			{
+				typ_entry = (dst_rec_ptr_t)
+					    DST_OFFSET(sym_entry,
+					    DST_signature(sym_entry).result);
+				type = decode_dst_type(objfile, typ_entry);
+			}
+		}
+	}
+
+	if (!type->function_type)
+	{
+		ftype = create_new_type(objfile);
+		type->function_type = ftype;
+		ftype->target_type = type;
+		ftype->code = TYPE_CODE_FUNC;
+	}
+	SYMBOL_TYPE(sym) = type->function_type;
+
+	/* Now add ourselves to the global symbols list */
+	element = (struct symbol_list *)
+			xmalloc(sizeof(struct symbol_list));
+
+	element->next = dst_global_symbols;
+	dst_global_symbols = element;
+	total_globals++;
+	element->symbol = sym;
+
+	return sym;
+}
+
+static struct block *
+process_dst_block(objfile, entry)
+    struct objfile *objfile;
+    dst_rec_ptr_t entry;
+{
+	struct	block	*block;
+	struct	symbol	*function = NULL;
+	CORE_ADDR address;
+	long	size;
+	char	*name;
+	dst_rec_ptr_t child_entry, symbol_entry;
+	struct block *child_block;
+	int	total_symbols = 0;
+	char	fake_name[20];
+	static	long	fake_seq = 0;
+	struct symbol_list *symlist, *nextsym;
+	int	symnum;
+
+	if (DST_block(entry).noffset)
+		name = DST_OFFSET(entry, DST_block(entry).noffset);
+	else
+		name = NULL;
+	if (DST_block(entry).n_of_code_ranges)
+	{
+		address = dst_sym_addr(
+				&DST_block(entry).code_ranges[0].code_start);
+		size = DST_block(entry).code_ranges[0].code_size;
+	}
+	else
+	{
+		address = -1;
+		size = 0;
+	}
+	symbol_entry = (dst_rec_ptr_t) get_sec_ref(&DST_block(entry).symbols_start);
+	switch(DST_block(entry).block_type)
+	{
+	/* These are all really functions. Even the "program" type.
+	 * This is because the Apollo OS was written in Pascal, and
+	 * in Pascal, the main procedure is described as the Program.
+	 * Cute, huh?
+	 */
+	case dst_block_procedure:
+	case dst_block_function:
+	case dst_block_subroutine:
+	case dst_block_program:
+		prim_record_minimal_symbol(name, address, mst_text, objfile);
+		function = process_dst_function(
+			objfile,
+			symbol_entry,
+			name,
+			address);
+		enter_all_lines(get_sec_ref(&DST_block(entry).code_ranges[0].lines_start), address);
+		break;
+	case dst_block_block_data:
+		break;
+
+	default:
+		/* GDB has to call it something, and the module name
+		 * won't cut it
+		 */
+		sprintf(fake_name, "block_%08lx", fake_seq++);
+		function = process_dst_function(
+			objfile, NULL, fake_name, address);
+		break;
+	}
+	symlist = process_dst_symbols(objfile, symbol_entry,
+					name, &total_symbols);
+	block = (struct block *)
+	    obstack_alloc (&objfile->symbol_obstack,
+				sizeof (struct block) +
+				(total_symbols - 1) * sizeof (struct symbol *));
+
+	symnum = 0;
+	while (symlist)
+	{
+		nextsym = symlist->next;
+
+		block->sym[symnum] = symlist->symbol;
+
+		free((PTR) symlist);
+		symlist = nextsym;
+		symnum++;
+	}
+	BLOCK_NSYMS (block) = total_symbols;
+	BLOCK_START (block) = address;
+	BLOCK_END (block) = address + size;
+	BLOCK_SUPERBLOCK (block) = 0;
+	if (function)
+	{
+		SYMBOL_BLOCK_VALUE (function) = block;
+		BLOCK_FUNCTION (block) = function;
+	}
+	else
+		BLOCK_FUNCTION (block) = 0;
+
+	if (DST_block(entry).child_block_off)
+	{
+		child_entry = (dst_rec_ptr_t) DST_OFFSET(entry,
+					DST_block(entry).child_block_off);
+		while (child_entry)
+		{
+			child_block = process_dst_block(objfile, child_entry);
+			if (child_block)
+			{
+				if (BLOCK_START(child_block) <
+				     BLOCK_START(block) ||
+				    BLOCK_START(block) == -1)
+					BLOCK_START(block) =
+					     BLOCK_START(child_block);
+				if (BLOCK_END(child_block) >
+				     BLOCK_END(block) ||
+				    BLOCK_END(block) == -1)
+					BLOCK_END(block) =
+					     BLOCK_END(child_block);
+				BLOCK_SUPERBLOCK (child_block) = block;
+			}
+			if (DST_block(child_entry).sibling_block_off)
+				child_entry = (dst_rec_ptr_t) DST_OFFSET(
+					child_entry,
+					DST_block(child_entry).sibling_block_off);
+			else
+				child_entry = NULL;
+		}
+	}
+	record_pending_block (objfile, block, NULL);
+	return block;
+}
+
+
+static void
+read_dst_symtab (objfile)
+     struct objfile *objfile;
+{
+	char	*buffer;
+	dst_rec_ptr_t entry, file_table, root_block;
+	char	*source_file;
+	struct	block *block, *global_block;
+	int	symnum;
+	struct symbol_list *nextsym;
+	int	module_num = 0;
+	struct	structure_list *element;
+
+	current_objfile = objfile;
+	buffer = blocks_info.buffer;
+	while (NEXT_BLK(&buffer, &entry))
+	{
+		if (entry->rec_type == dst_typ_comp_unit)
+		{
+			file_table = (dst_rec_ptr_t) DST_OFFSET(entry,
+					DST_comp_unit(entry).file_table);
+			section_table = (dst_rec_ptr_t) DST_OFFSET(entry,
+					DST_comp_unit(entry).section_table);
+			root_block = (dst_rec_ptr_t) DST_OFFSET(entry,
+					DST_comp_unit(entry).root_block_offset);
+			source_file = DST_OFFSET(file_table,
+					DST_file_tab(file_table).files[0].noffset);
+			/* Point buffer to the start of the next comp_unit */
+			buffer = DST_OFFSET(entry,
+					DST_comp_unit(entry).data_size);
+			dst_start_symtab();
+
+			block = process_dst_block(objfile, root_block);
+
+			global_block = (struct block *)
+				    obstack_alloc (&objfile->symbol_obstack,
+					sizeof (struct block) +
+					(total_globals - 1) *
+					sizeof (struct symbol *));
+			BLOCK_NSYMS(global_block) = total_globals;
+			for (symnum = 0; symnum < total_globals; symnum++)
+			{
+				nextsym = dst_global_symbols->next;
+
+				global_block->sym[symnum] =
+						dst_global_symbols->symbol;
+
+				free((PTR) dst_global_symbols);
+				dst_global_symbols = nextsym;
+			}
+			dst_global_symbols = NULL;
+			total_globals = 0;
+			BLOCK_FUNCTION(global_block) = 0;
+			BLOCK_START(global_block) = BLOCK_START(block);
+			BLOCK_END(global_block) = BLOCK_END(block);
+			BLOCK_SUPERBLOCK(global_block) = 0;
+			BLOCK_SUPERBLOCK(block) = global_block;
+			record_pending_block (objfile, global_block, NULL);
+
+			complete_symtab(source_file,
+					BLOCK_START(block), 
+					BLOCK_END(block) - BLOCK_START(block));
+			module_num++;
+			dst_end_symtab(objfile);
+		}
+	}
+	if (module_num)
+		prim_record_minimal_symbol("<end_of_program>",
+				BLOCK_END(block), mst_text, objfile);
+	/* One more faked symbol to make sure nothing can ever run off the
+	 * end of the symbol table. This one represents the end of the
+	 * text space. It used to be (CORE_ADDR) -1 (effectively the highest
+	 * int possible), but some parts of gdb treated it as a signed
+	 * number and failed comparisons. We could equally use 7fffffff,
+	 * but no functions are ever mapped to an address higher than
+	 * 40000000
+	 */
+	prim_record_minimal_symbol("<end_of_text>",
+				(CORE_ADDR) 0x40000000,
+				mst_text, objfile);
+	while (struct_list)
+	{
+		element = struct_list;
+		struct_list = element->next;
+		free((PTR) element);
+	}
+}
+
+
+/* Support for line number handling */
+static char *linetab = NULL;
+static long linetab_offset;
+static unsigned long linetab_size;
+
+/* Read in all the line numbers for fast lookups later.  Leave them in
+   external (unswapped) format in memory; we'll swap them as we enter
+   them into GDB's data structures.  */
+static int
+init_one_section(chan, secinfo)
+    int chan;
+    dst_sec *secinfo;
+{
+  if (secinfo->size == 0
+      || lseek(chan, secinfo->position, 0) == -1
+      || (secinfo->buffer = xmalloc(secinfo->size)) == NULL
+      || myread(chan, secinfo->buffer, secinfo->size) == -1)
+	return 0;
+  else
+	return 1;
+}
+ 
+static int
+init_dst_sections (chan)
+    int chan;
+{
+
+  if (!init_one_section(chan, &blocks_info) ||
+      !init_one_section(chan, &lines_info) ||
+      !init_one_section(chan, &symbols_info))
+    return -1;
+  else
+    return 0;
+}
+
+/* Fake up support for relocating symbol addresses.  FIXME.  */
+
+struct section_offsets dst_symfile_faker = {0};
+
+struct section_offsets *
+dst_symfile_offsets (objfile, addr)
+     struct objfile *objfile;
+     CORE_ADDR addr;
+{
+  objfile->num_sections = 1;
+  return &dst_symfile_faker;
+}
+
+/* Register our ability to parse symbols for DST BFD files */
+
+static struct sym_fns dst_sym_fns =
+{
+  /* FIXME: Can this be integrated with coffread.c?  If not, should it be
+     a separate flavour like ecoff?  */
+  (enum bfd_flavour)-2,
+
+  dst_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  dst_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  dst_symfile_read,	/* sym_read: read a symbol file into symtab */
+  dst_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  dst_symfile_offsets, /* sym_offsets:  xlate external to internal form */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_dstread ()
+{
+  add_symtab_fns(&dst_sym_fns);
+}
diff --git a/gdb/dve3900-rom.c b/gdb/dve3900-rom.c
new file mode 100644
index 0000000..c76da77
--- /dev/null
+++ b/gdb/dve3900-rom.c
@@ -0,0 +1,962 @@
+/* Remote debugging interface for Densan DVE-R3900 ROM monitor for
+   GDB, the GNU debugger.
+   Copyright 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "inferior.h"
+#include "command.h"
+#include "gdb_string.h"
+#include <time.h>
+
+/* Type of function passed to bfd_map_over_sections.  */
+
+typedef void (*section_map_func) PARAMS ((bfd *abfd, asection *sect, PTR obj));
+
+/* Packet escape character used by Densan monitor.  */
+
+#define PESC 0xdc
+
+/* Maximum packet size.  This is actually smaller than necessary
+   just to be safe.  */
+
+#define MAXPSIZE 1024
+
+/* External functions.  */
+
+extern void report_transfer_performance PARAMS ((unsigned long,
+						 time_t, time_t));
+
+/* Certain registers are "bitmapped", in that the monitor can only display
+   them or let the user modify them as a series of named bitfields.
+   This structure describes a field in a bitmapped register.  */
+
+struct bit_field
+{
+  char *prefix;		/* string appearing before the value */
+  char *suffix;		/* string appearing after the value */
+  char *user_name;	/* name used by human when entering field value */
+  int  length;		/* number of bits in the field */
+  int  start;		/* starting (least significant) bit number of field */
+};
+        
+/* Local functions for register manipulation.  */
+
+static void r3900_supply_register PARAMS ((char *regname, int regnamelen,
+					   char *val, int vallen));
+static void fetch_bad_vaddr PARAMS ((void));
+static unsigned long fetch_fields PARAMS ((struct bit_field *bf));
+static void fetch_bitmapped_register PARAMS ((int regno,
+						   struct bit_field *bf));
+static void r3900_fetch_registers PARAMS ((int regno));
+static void store_bitmapped_register PARAMS ((int regno,
+						    struct bit_field *bf));
+static void r3900_store_registers PARAMS ((int regno));
+
+/* Local functions for fast binary loading.  */
+
+static void write_long PARAMS ((char *buf, long n));
+static void write_long_le PARAMS ((char *buf, long n));
+static int  debug_readchar PARAMS ((int hex));
+static void debug_write PARAMS ((unsigned char *buf, int buflen));
+static void ignore_packet PARAMS ((void));
+static void send_packet PARAMS ((char type, unsigned char *buf, int buflen,
+				 int seq));
+static void process_read_request PARAMS ((unsigned char *buf, int buflen));
+static void count_section PARAMS ((bfd *abfd, asection *s,
+				   unsigned int *section_count));
+static void load_section PARAMS ((bfd *abfd, asection *s,
+				  unsigned int *data_count));
+static void r3900_load PARAMS ((char *filename, int from_tty));
+
+/* Miscellaneous local functions.  */
+
+static void r3900_open PARAMS ((char *args, int from_tty));
+
+
+/* Pointers to static functions in monitor.c for fetching and storing
+   registers.  We can't use these function in certain cases where the Densan
+   monitor acts perversely: for registers that it displays in bit-map
+   format, and those that can't be modified at all.  In those cases
+   we have to use our own functions to fetch and store their values.  */
+
+static void (*orig_monitor_fetch_registers) PARAMS ((int regno));
+static void (*orig_monitor_store_registers) PARAMS ((int regno));
+
+/* Pointer to static function in monitor. for loading programs.
+   We use this function for loading S-records via the serial link.  */
+
+static void (*orig_monitor_load) PARAMS ((char *file, int from_tty));
+
+/* This flag is set if a fast ethernet download should be used.  */
+
+static int ethernet = 0;
+
+/* This array of registers needs to match the indexes used by GDB. The
+   whole reason this exists is because the various ROM monitors use
+   different names than GDB does, and don't support all the registers
+   either.  */
+
+static char *r3900_regnames[NUM_REGS] =
+{
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "r16",  "r17",  "r18",  "r19",  "r20",  "r21",  "r22",  "r23",
+  "r24",  "r25",  "r26",  "r27",  "r28",  "r29",  "r30",  "r31",
+
+  "S", 		/* PS_REGNUM */
+  "l",		/* LO_REGNUM */
+  "h",		/* HI_REGNUM */
+  "B",		/* BADVADDR_REGNUM */
+  "Pcause",	/* CAUSE_REGNUM */
+  "p"		/* PC_REGNUM */
+};
+
+
+/* Table of register names produced by monitor's register dump command.  */
+
+static struct reg_entry
+{
+  char *name;
+  int regno;
+} reg_table[] =
+{
+  { "r0_zero", 0 },  { "r1_at",   1 },  { "r2_v0",   2 },  { "r3_v1",   3 },
+  { "r4_a0",   4 },  { "r5_a1",   5 },  { "r6_a2",   6 },  { "r7_a3",   7 },
+  { "r8_t0",   8 },  { "r9_t1",   9 },  { "r10_t2", 10 },  { "r11_t3", 11 },
+  { "r12_t4", 12 },  { "r13_t5", 13 },  { "r14_t6", 14 },  { "r15_t7", 15 },
+  { "r16_s0", 16 },  { "r17_s1", 17 },  { "r18_s2", 18 },  { "r19_s3", 19 },
+  { "r20_s4", 20 },  { "r21_s5", 21 },  { "r22_s6", 22 },  { "r23_s7", 23 },
+  { "r24_t8", 24 },  { "r25_t9", 25 },  { "r26_k0", 26 },  { "r27_k1", 27 },
+  { "r28_gp", 28 },  { "r29_sp", 29 },  { "r30_fp", 30 },  { "r31_ra", 31 },
+  { "HI",     HI_REGNUM },
+  { "LO",     LO_REGNUM },
+  { "PC",     PC_REGNUM },
+  { "BadV",   BADVADDR_REGNUM },
+  { NULL,     0 }
+};
+
+
+/* The monitor displays the cache register along with the status register,
+   as if they were a single register.  So when we want to fetch the
+   status register, parse but otherwise ignore the fields of the
+   cache register that the monitor displays.  Register fields that should
+   be ignored have a length of zero in the tables below.  */
+
+static struct bit_field status_fields [] =
+{
+  /* Status register portion */
+  { "SR[<CU=",	" ",	"cu",	4, 28 },
+  { "RE=",	" ",	"re",	1, 25 },
+  { "BEV=",	" ",	"bev",	1, 22 },
+  { "TS=",	" ",	"ts",	1, 21 },
+  { "Nmi=",	" ",	"nmi",	1, 20 },
+  { "INT=",	" ",	"int",  6, 10 },
+  { "SW=",	">]",	"sw",   2,  8 },
+  { "[<KUO=",	" ",	"kuo",  1,  5 },
+  { "IEO=",	" ",	"ieo",  1,  4 },
+  { "KUP=",	" ",	"kup",  1,  3 },
+  { "IEP=",	" ",	"iep",  1,  2 },
+  { "KUC=",	" ",	"kuc",  1,  1 },
+  { "IEC=",	">]",	"iec",  1,  0 },
+
+  /* Cache register portion (dummy for parsing only) */
+  { "CR[<IalO="," ",	"ialo",	0, 13 },
+  { "DalO=",	" ",	"dalo",	0, 12 },
+  { "IalP=",	" ",	"ialp",	0, 11 },
+  { "DalP=",	" ",	"dalp",	0, 10 },
+  { "IalC=",	" ",	"ialc",	0,  9 },
+  { "DalC=",	">] ",	"dalc",	0,  8 },
+
+  { NULL,	NULL,	0,  0 }		/* end of table marker */
+};
+
+
+#if 0	/* FIXME: Enable when we add support for modifying cache register.  */
+static struct bit_field cache_fields [] =
+{
+  /* Status register portion (dummy for parsing only) */
+  { "SR[<CU=",	" ",	"cu",	0, 28 },
+  { "RE=",	" ",	"re",	0, 25 },
+  { "BEV=",	" ",	"bev",	0, 22 },
+  { "TS=",	" ",	"ts",	0, 21 },
+  { "Nmi=",	" ",	"nmi",	0, 20 },
+  { "INT=",	" ",	"int",  0, 10 },
+  { "SW=",	">]",	"sw",   0,  8 },
+  { "[<KUO=",	" ",	"kuo",  0,  5 },
+  { "IEO=",	" ",	"ieo",  0,  4 },
+  { "KUP=",	" ",	"kup",  0,  3 },
+  { "IEP=",	" ",	"iep",  0,  2 },
+  { "KUC=",	" ",	"kuc",  0,  1 },
+  { "IEC=",	">]",	"iec",  0,  0 },
+
+  /* Cache register portion  */
+  { "CR[<IalO="," ",	"ialo",	1, 13 },
+  { "DalO=",	" ",	"dalo",	1, 12 },
+  { "IalP=",	" ",	"ialp",	1, 11 },
+  { "DalP=",	" ",	"dalp",	1, 10 },
+  { "IalC=",	" ",	"ialc",	1,  9 },
+  { "DalC=",	">] ",	"dalc",	1,  8 },
+
+  { NULL,	NULL,	NULL,	0,  0 }		/* end of table marker */
+};
+#endif
+
+
+static struct bit_field cause_fields[] = 
+{
+  { "<BD=",	" ",	"bd",   1, 31 },
+  { "CE=",	" ",	"ce",   2, 28 },
+  { "IP=",	" ",	"ip",   6, 10 },
+  { "SW=", 	" ",	"sw",   2,  8 },
+  { "EC=", 	">]" ,	"ec",   5,  2 },
+
+  { NULL,	NULL,	NULL,	0,  0 }		/* end of table marker */
+};
+
+
+/* The monitor prints register values in the form
+
+	regname = xxxx xxxx
+
+   We look up the register name in a table, and remove the embedded space in
+   the hex value before passing it to monitor_supply_register.  */
+
+static void
+r3900_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno = -1;
+  int i;
+  char valbuf[10];
+  char *p;
+
+  /* Perform some sanity checks on the register name and value.  */
+  if (regnamelen < 2 || regnamelen > 7 || vallen != 9)
+    return;
+
+  /* Look up the register name.  */
+  for (i = 0; reg_table[i].name != NULL; i++)
+    {
+      int rlen = strlen (reg_table[i].name);
+      if (rlen == regnamelen && strncmp (regname, reg_table[i].name, rlen) == 0)
+	{
+	  regno = reg_table[i].regno;
+	  break;
+	}
+    }
+  if (regno == -1)
+    return;
+
+  /* Copy the hex value to a buffer and eliminate the embedded space. */
+  for (i = 0, p = valbuf; i < vallen; i++)
+    if (val[i] != ' ')
+      *p++ = val[i];
+  *p = '\0';
+
+  monitor_supply_register (regno, valbuf);
+}
+
+
+/* Fetch the BadVaddr register.  Unlike the other registers, this
+   one can't be modified, and the monitor won't even prompt to let
+   you modify it.  */
+
+static void
+fetch_bad_vaddr()
+{
+  char buf[20];
+
+  monitor_printf ("xB\r");
+  monitor_expect ("BadV=", NULL, 0);
+  monitor_expect_prompt (buf, sizeof(buf));
+  monitor_supply_register (BADVADDR_REGNUM, buf);
+}
+
+    
+/* Read a series of bit fields from the monitor, and return their
+   combined binary value.  */
+
+static unsigned long
+fetch_fields (bf)
+     struct bit_field *bf;
+{
+  char buf[20];
+  unsigned long val = 0;
+  unsigned long bits;
+
+  for ( ; bf->prefix != NULL; bf++)
+    {
+      monitor_expect (bf->prefix, NULL, 0);		/* get prefix */
+      monitor_expect (bf->suffix, buf, sizeof (buf));	/* hex value, suffix */
+      if (bf->length != 0)
+        {
+	  bits = strtoul (buf, NULL, 16);	/* get field value */
+	  bits &= ((1 << bf->length) - 1);	/* mask out useless bits */
+	  val |= bits << bf->start;		/* insert into register */
+	}
+	  
+    }
+
+  return val;
+}
+
+
+static void
+fetch_bitmapped_register (regno, bf)
+     int regno;
+     struct bit_field *bf;
+{
+  unsigned long val;
+  unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+
+  monitor_printf ("x%s\r", r3900_regnames[regno]);
+  val = fetch_fields (bf);
+  monitor_printf (".\r");
+  monitor_expect_prompt (NULL, 0);
+
+  /* supply register stores in target byte order, so swap here */
+
+  store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val);
+  supply_register (regno, regbuf);
+
+}
+
+
+/* Fetch all registers (if regno is -1), or one register from the
+   monitor.  For most registers, we can use the generic monitor_
+   monitor_fetch_registers function.  But others are displayed in
+   a very unusual fashion by the monitor, and must be handled specially.  */
+
+static void
+r3900_fetch_registers (regno)
+     int regno;
+{
+  switch (regno)
+    {
+    case BADVADDR_REGNUM:
+      fetch_bad_vaddr ();
+      return;
+    case PS_REGNUM:
+      fetch_bitmapped_register (PS_REGNUM, status_fields);
+      return;
+    case CAUSE_REGNUM:
+      fetch_bitmapped_register (CAUSE_REGNUM, cause_fields);
+      return;
+    default:
+      orig_monitor_fetch_registers (regno);
+    }
+}
+
+
+/* Write the new value of the bitmapped register to the monitor.  */
+
+static void
+store_bitmapped_register (regno, bf)
+     int regno;
+     struct bit_field *bf;
+{
+  unsigned long oldval, newval;
+
+  /* Fetch the current value of the register.  */
+  monitor_printf ("x%s\r", r3900_regnames[regno]);
+  oldval = fetch_fields (bf);
+  newval = read_register (regno);
+
+  /* To save time, write just the fields that have changed.  */
+  for ( ; bf->prefix != NULL; bf++)
+    {
+      if (bf->length != 0)
+        {
+	  unsigned long oldbits, newbits, mask;
+
+	  mask = (1 << bf->length) - 1;
+	  oldbits = (oldval >> bf->start) & mask;
+	  newbits = (newval >> bf->start) & mask;
+	  if (oldbits != newbits)
+	    monitor_printf ("%s %x ", bf->user_name, newbits);
+	}
+    }
+
+  monitor_printf (".\r");
+  monitor_expect_prompt (NULL, 0);
+}
+
+
+static void
+r3900_store_registers (regno)
+     int regno;
+{
+  switch (regno)
+    {
+    case PS_REGNUM:
+      store_bitmapped_register (PS_REGNUM, status_fields);
+      return;
+    case CAUSE_REGNUM:
+      store_bitmapped_register (CAUSE_REGNUM, cause_fields);
+      return;
+    default:
+      orig_monitor_store_registers (regno);
+    }
+}
+
+
+/* Write a 4-byte integer to the buffer in big-endian order.  */
+
+static void
+write_long (buf, n)
+     char *buf;
+     long n;
+{
+  buf[0] = (n >> 24) & 0xff;
+  buf[1] = (n >> 16) & 0xff;
+  buf[2] = (n >> 8) & 0xff;
+  buf[3] = n & 0xff;
+}
+
+
+/* Write a 4-byte integer to the buffer in little-endian order.  */
+
+static void
+write_long_le (buf, n)
+     char *buf;
+     long n;
+{
+  buf[0] = n & 0xff;
+  buf[1] = (n >> 8) & 0xff;
+  buf[2] = (n >> 16) & 0xff;
+  buf[3] = (n >> 24) & 0xff;
+}
+
+
+/* Read a character from the monitor.  If remote debugging is on,
+   print the received character.  If HEX is non-zero, print the
+   character in hexadecimal; otherwise, print it in ASCII.  */
+
+static int
+debug_readchar (hex)
+     int hex;
+{
+  char buf [10];
+  int c = monitor_readchar ();
+
+  if (remote_debug > 0)
+    {
+      if (hex)
+	sprintf (buf, "[%02x]", c & 0xff);
+      else if (c == '\0')
+	strcpy (buf, "\\0");
+      else 
+	{
+	  buf[0] = c;
+	  buf[1] = '\0';
+	}
+      puts_debug ("Read -->", buf, "<--");
+    }
+  return c;
+}
+
+
+/* Send a buffer of characters to the monitor.  If remote debugging is on,
+   print the sent buffer in hex.  */
+
+static void
+debug_write (buf, buflen)
+     unsigned char *buf;
+     int buflen;
+{
+  char s[10];
+
+  monitor_write (buf, buflen);
+
+  if (remote_debug > 0)
+    {
+      while (buflen-- > 0)
+	{
+	  sprintf (s, "[%02x]", *buf & 0xff);
+	  puts_debug ("Sent -->", s, "<--");
+	  buf++;
+	}
+    }
+}
+
+
+/* Ignore a packet sent to us by the monitor.  It send packets
+   when its console is in "communications interface" mode.   A packet
+   is of this form:
+
+      start of packet flag (one byte: 0xdc)
+      packet type (one byte)
+      length (low byte)
+      length (high byte)
+      data (length bytes)
+
+   The last two bytes of the data field are a checksum, but we don't
+   bother to verify it.
+*/
+
+static void
+ignore_packet ()
+{
+  int c;
+  int len;  
+
+  /* Ignore lots of trash (messages about section addresses, for example)
+     until we see the start of a packet.  */
+  for (len = 0; len < 256; len++)
+    {
+      c = debug_readchar (0);
+      if (c == PESC)
+	break;
+    }
+  if (len == 8)
+    error ("Packet header byte not found; %02x seen instead.", c);
+
+  /* Read the packet type and length.  */
+  c = debug_readchar (1);			/* type */
+
+  c = debug_readchar (1);			/* low byte of length */
+  len = c & 0xff;
+
+  c = debug_readchar (1);			/* high byte of length */
+  len += (c & 0xff) << 8;
+
+  /* Ignore the rest of the packet.  */
+  while (len-- > 0)
+    c = debug_readchar (1);
+}
+
+
+/* Encapsulate some data into a packet and send it to the monitor.
+
+   The 'p' packet is a special case.  This is a packet we send
+   in response to a read ('r') packet from the monitor.  This function
+   appends a one-byte sequence number to the data field of such a packet.
+*/
+
+static void
+send_packet (type, buf, buflen, seq)
+     char type;
+     unsigned char *buf;
+     int buflen, seq;
+{
+  unsigned char hdr[4];
+  int len = buflen;
+  int sum, i;
+
+  /* If this is a 'p' packet, add one byte for a sequence number.  */
+  if (type == 'p')
+    len++;
+
+  /* If the buffer has a non-zero length, add two bytes for a checksum.  */
+  if (len > 0)
+    len += 2;
+
+  /* Write the packet header.  */
+  hdr[0] = PESC;
+  hdr[1] = type;
+  hdr[2] = len & 0xff;
+  hdr[3] = (len >> 8) & 0xff;
+  debug_write (hdr, sizeof (hdr));
+
+  if (len)
+    {
+      /* Write the packet data.  */
+      debug_write (buf, buflen);
+
+      /* Write the sequence number if this is a 'p' packet.  */
+      if (type == 'p')
+	{
+	  hdr[0] = seq;
+	  debug_write (hdr, 1);
+	}
+
+      /* Write the checksum.  */
+      sum = 0;
+      for (i = 0; i < buflen; i++)
+	{
+	  int tmp = (buf[i] & 0xff);
+	  if (i & 1)
+	    sum += tmp;
+	  else
+	    sum += tmp << 8;
+	}
+      if (type == 'p')
+        {
+	  if (buflen & 1)
+	    sum += (seq & 0xff);
+	  else
+	    sum += (seq & 0xff) << 8;
+	}
+      sum = (sum & 0xffff) + ((sum >> 16) & 0xffff);
+      sum += (sum >> 16) & 1;
+      sum = ~sum;  
+
+      hdr[0] = (sum >> 8) & 0xff;
+      hdr[1] = sum & 0xff;
+      debug_write (hdr, 2);
+    }
+}
+
+
+/* Respond to an expected read request from the monitor by sending
+   data in chunks.  Handle all acknowledgements and handshaking packets.
+
+   The monitor expects a response consisting of a one or more 'p' packets,
+   each followed by a portion of the data requested.  The 'p' packet
+   contains only a four-byte integer, the value of which is the number
+   of bytes of data we are about to send.  Following the 'p' packet,
+   the monitor expects the data bytes themselves in raw, unpacketized,
+   form, without even a checksum.
+ */
+
+static void
+process_read_request (buf, buflen)
+     unsigned char *buf;
+     int buflen;
+{
+  unsigned char len[4];
+  int i, chunk;
+  unsigned char seq;
+
+  /* Discard the read request.  FIXME: we have to hope it's for
+     the exact number of bytes we want to send; should check for this.  */
+  ignore_packet ();
+
+  for (i = chunk = 0, seq = 0; i < buflen; i += chunk, seq++)
+    {
+      /* Don't send more than MAXPSIZE bytes at a time.  */
+      chunk = buflen - i;
+      if (chunk > MAXPSIZE)
+	chunk = MAXPSIZE;
+
+      /* Write a packet containing the number of bytes we are sending.  */
+      write_long_le (len, chunk);
+      send_packet ('p', len, sizeof (len), seq);
+
+      /* Write the data in raw form following the packet.  */
+      debug_write (&buf[i], chunk);
+
+      /* Discard the ACK packet.  */
+      ignore_packet ();
+    }
+
+  /* Send an "end of data" packet.  */
+  send_packet ('e', "", 0, 0);
+}
+
+
+/* Count loadable sections (helper function for r3900_load).  */
+
+static void
+count_section (abfd, s, section_count)
+     bfd      *abfd;
+     asection *s;
+     unsigned int *section_count;
+{
+  if (s->flags & SEC_LOAD && bfd_section_size (abfd, s) != 0)
+    (*section_count)++;
+}
+
+
+/* Load a single BFD section (helper function for r3900_load).
+
+   WARNING: this code is filled with assumptions about how
+   the Densan monitor loads programs.  The monitor issues
+   packets containing read requests, but rather than respond
+   to them in an general way, we expect them to following
+   a certain pattern.
+   
+   For example, we know that the monitor will start loading by
+   issuing an 8-byte read request for the binary file header.
+   We know this is coming and ignore the actual contents
+   of the read request packet.
+*/
+
+static void
+load_section (abfd, s, data_count)
+     bfd      *abfd;
+     asection *s;
+     unsigned int *data_count;
+{
+  if (s->flags & SEC_LOAD)
+    {
+      bfd_size_type section_size = bfd_section_size (abfd, s);
+      bfd_vma       section_base = bfd_section_lma  (abfd, s);
+      unsigned char *buffer;
+      unsigned char header[8];
+
+      /* Don't output zero-length sections.  */
+      if (section_size == 0)
+        return;
+      if (data_count)
+	*data_count += section_size;
+
+      /* Print some fluff about the section being loaded.  */
+      printf_filtered ("Loading section %s, size 0x%lx lma ",
+		       bfd_section_name (abfd, s), (long)section_size);
+      print_address_numeric (section_base, 1, gdb_stdout);
+      printf_filtered ("\n");
+      gdb_flush (gdb_stdout);
+
+      /* Write the section header (location and size).  */
+      write_long (&header[0], (long)section_base);
+      write_long (&header[4], (long)section_size);
+      process_read_request (header, sizeof (header));
+
+      /* Read the section contents into a buffer, write it out,
+         then free the buffer.  */
+      buffer = (unsigned char *) xmalloc (section_size);
+      bfd_get_section_contents (abfd, s, buffer, 0, section_size);
+      process_read_request (buffer, section_size);
+      free (buffer);
+  }
+}
+
+
+/* When the ethernet is used as the console port on the Densan board,
+   we can use the "Rm" command to do a fast binary load.  The format
+   of the download data is:
+
+	number of sections (4 bytes)
+	starting address (4 bytes)
+	repeat for each section:
+	    location address (4 bytes)
+	    section size (4 bytes)
+	    binary data
+
+   The 4-byte fields are all in big-endian order.
+
+   Using this command is tricky because we have to put the monitor
+   into a special funky "communications interface" mode, in which
+   it sends and receives packets of data along with the normal prompt.
+ */
+
+static void
+r3900_load (filename, from_tty) 
+    char *filename;
+    int from_tty;
+{
+  bfd *abfd;
+  unsigned int data_count = 0;
+  time_t start_time, end_time;	/* for timing of download */
+  int section_count = 0;
+  unsigned char buffer[8];
+
+  /* If we are not using the ethernet, use the normal monitor load,
+     which sends S-records over the serial link.  */
+  if (!ethernet)
+    {
+      orig_monitor_load (filename, from_tty);
+      return;
+    }
+
+  /* Open the file.  */
+  if (filename == NULL || filename[0] == 0)
+    filename = get_exec_file (1);
+  abfd = bfd_openr (filename, 0);
+  if (!abfd)
+    error ("Unable to open file %s\n", filename);
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    error ("File is not an object file\n");
+
+  /* Output the "vconsi" command to get the monitor in the communication
+     state where it will accept a load command.  This will cause
+     the monitor to emit a packet before each prompt, so ignore the packet.  */
+  monitor_printf ("vconsi\r");
+  ignore_packet ();
+  monitor_expect_prompt (NULL, 0);
+
+  /* Output the "Rm" (load) command and respond to the subsequent "open"
+     packet by sending an ACK packet.  */
+  monitor_printf ("Rm\r");
+  ignore_packet ();
+  send_packet ('a', "", 0, 0);
+  
+  /* Output the fast load header (number of sections and starting address).  */
+  bfd_map_over_sections ((bfd *) abfd, (section_map_func) count_section,
+			 &section_count);
+  write_long (&buffer[0], (long)section_count);
+  if (exec_bfd)
+    write_long (&buffer[4], (long)bfd_get_start_address (exec_bfd));
+  else
+    write_long (&buffer[4], 0);
+  process_read_request (buffer, sizeof (buffer));
+
+  /* Output the section data.  */
+  start_time = time (NULL);
+  bfd_map_over_sections (abfd, (section_map_func) load_section, &data_count);
+  end_time = time (NULL);
+
+  /* Acknowledge the close packet and put the monitor back into
+     "normal" mode so it won't send packets any more.  */
+  ignore_packet ();
+  send_packet ('a', "", 0, 0);
+  monitor_expect_prompt (NULL, 0);
+  monitor_printf ("vconsx\r");
+  monitor_expect_prompt (NULL, 0);
+
+  /* Print start address and download performance information.  */
+  printf_filtered ("Start address 0x%lx\n", (long)bfd_get_start_address (abfd));
+  report_transfer_performance (data_count, start_time, end_time);
+
+  /* Finally, make the PC point at the start address */
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;             /* No process now */
+
+  /* This is necessary because many things were based on the PC at the
+     time that we attached to the monitor, which is no longer valid
+     now that we have loaded new code (and just changed the PC).
+     Another way to do this might be to call normal_stop, except that
+     the stack may not be valid, and things would get horribly
+     confused... */
+  clear_symtab_users ();
+}
+
+
+/* Commands to send to the monitor when first connecting:
+    * The bare carriage return forces a prompt from the monitor
+      (monitor doesn't prompt immediately after a reset).
+    * The "vconsx" switches the monitor back to interactive mode
+      in case an aborted download had left it in packet mode.
+    * The "Xtr" command causes subsequent "t" (trace) commands to display
+      the general registers only.
+    * The "Xxr" command does the same thing for the "x" (examine
+      registers) command.
+    * The "bx" command clears all breakpoints.
+*/
+
+static char *r3900_inits[] = {"\r", "vconsx\r", "Xtr\r", "Xxr\r", "bx\r", NULL};
+static char *dummy_inits[] = { NULL };
+
+static struct target_ops r3900_ops;
+static struct monitor_ops r3900_cmds;
+
+static void
+r3900_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[64];
+  int i;
+
+  monitor_open (args, &r3900_cmds, from_tty);
+
+  /* We have to handle sending the init strings ourselves, because
+     the first two strings we send (carriage returns) may not be echoed
+     by the monitor, but the rest will be.  */
+  monitor_printf_noecho ("\r\r");
+  for (i = 0; r3900_inits[i] != NULL; i++)
+    {
+      monitor_printf (r3900_inits[i]);
+      monitor_expect_prompt (NULL, 0);
+    }
+
+  /* Attempt to determine whether the console device is ethernet or serial.
+     This will tell us which kind of load to use (S-records over a serial
+     link, or the Densan fast binary multi-section format over the net).  */
+
+  ethernet = 0;
+  monitor_printf ("v\r");
+  if (monitor_expect ("console device :", NULL, 0) != -1)
+      if (monitor_expect ("\n", buf, sizeof (buf)) != -1)
+	if (strstr (buf, "ethernet") != NULL)
+	  ethernet = 1;
+  monitor_expect_prompt (NULL, 0);
+}
+
+void
+_initialize_r3900_rom ()
+{
+  r3900_cmds.flags = MO_NO_ECHO_ON_OPEN |
+		     MO_ADDR_BITS_REMOVE |
+		     MO_CLR_BREAK_USES_ADDR |
+		     MO_GETMEM_READ_SINGLE |
+		     MO_PRINT_PROGRAM_OUTPUT;
+
+  r3900_cmds.init = dummy_inits;
+  r3900_cmds.cont = "g\r";
+  r3900_cmds.step = "t\r";
+  r3900_cmds.set_break = "b %A\r";		/* COREADDR */
+  r3900_cmds.clr_break = "b %A,0\r";		/* COREADDR */
+  r3900_cmds.fill = "fx %A s %x %x\r";		/* COREADDR, len, val */
+
+  r3900_cmds.setmem.cmdb = "sx %A %x\r";	/* COREADDR, val */
+  r3900_cmds.setmem.cmdw = "sh %A %x\r";	/* COREADDR, val */
+  r3900_cmds.setmem.cmdl = "sw %A %x\r";	/* COREADDR, val */
+
+  r3900_cmds.getmem.cmdb = "sx %A\r";		/* COREADDR */
+  r3900_cmds.getmem.cmdw = "sh %A\r";		/* COREADDR */
+  r3900_cmds.getmem.cmdl = "sw %A\r";		/* COREADDR */
+  r3900_cmds.getmem.resp_delim = " : ";
+  r3900_cmds.getmem.term = " ";
+  r3900_cmds.getmem.term_cmd = ".\r";
+
+  r3900_cmds.setreg.cmd = "x%s %x\r";		/* regname, val */
+
+  r3900_cmds.getreg.cmd = "x%s\r";		/* regname */
+  r3900_cmds.getreg.resp_delim = "=";
+  r3900_cmds.getreg.term = " ";
+  r3900_cmds.getreg.term_cmd = ".\r";
+
+  r3900_cmds.dump_registers = "x\r";
+  r3900_cmds.register_pattern =
+	"\\([a-zA-Z0-9_]+\\) *=\\([0-9a-f]+ [0-9a-f]+\\b\\)";
+  r3900_cmds.supply_register = r3900_supply_register;
+  /* S-record download, via "keyboard port".  */
+  r3900_cmds.load = "r0\r";
+  r3900_cmds.prompt = "#";
+  r3900_cmds.line_term = "\r";
+  r3900_cmds.target = &r3900_ops;
+  r3900_cmds.stopbits = SERIAL_1_STOPBITS;
+  r3900_cmds.regnames = r3900_regnames;
+  r3900_cmds.magic = MONITOR_OPS_MAGIC;
+
+  init_monitor_ops (&r3900_ops);
+
+  r3900_ops.to_shortname = "r3900";
+  r3900_ops.to_longname = "R3900 monitor";
+  r3900_ops.to_doc = "Debug using the DVE R3900 monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  r3900_ops.to_open = r3900_open;
+
+  /* Override the functions to fetch and store registers.  But save the
+     addresses of the default functions, because we will use those functions
+     for "normal" registers.  */
+
+  orig_monitor_fetch_registers = r3900_ops.to_fetch_registers;
+  orig_monitor_store_registers = r3900_ops.to_store_registers;
+  r3900_ops.to_fetch_registers = r3900_fetch_registers;
+  r3900_ops.to_store_registers = r3900_store_registers;
+
+  /* Override the load function, but save the address of the default
+     function to use when loading S-records over a serial link.  */
+  orig_monitor_load = r3900_ops.to_load;
+  r3900_ops.to_load = r3900_load;
+
+  add_target (&r3900_ops);
+}
diff --git a/gdb/dwarf2read.c b/gdb/dwarf2read.c
new file mode 100644
index 0000000..cf52066
--- /dev/null
+++ b/gdb/dwarf2read.c
@@ -0,0 +1,5865 @@
+/* DWARF 2 debugging format support for GDB.
+   Copyright 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+
+   Adapted by Gary Funck (gary@intrepid.com), Intrepid Technology,
+   Inc.  with support from Florida State University (under contract
+   with the Ada Joint Program Office), and Silicon Graphics, Inc.
+   Initial contribution by Brent Benson, Harris Computer Systems, Inc.,
+   based on Fred Fish's (Cygnus Support) implementation of DWARF 1
+   support in dwarfread.c
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or (at
+your option) any later version.
+
+This program is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "elf-bfd.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "elf/dwarf2.h"
+#include "buildsym.h"
+#include "demangle.h"
+#include "expression.h"
+#include "language.h"
+#include "complaints.h"
+
+#include <fcntl.h>
+#include "gdb_string.h"
+#include <sys/types.h>
+
+/* .debug_info header for a compilation unit 
+   Because of alignment constraints, this structure has padding and cannot
+   be mapped directly onto the beginning of the .debug_info section.  */
+typedef struct comp_unit_header
+  {
+    unsigned int length;	/* length of the .debug_info
+				   contribution */
+    unsigned short version;	/* version number -- 2 for DWARF
+				   version 2 */
+    unsigned int abbrev_offset;	/* offset into .debug_abbrev section */
+    unsigned char addr_size;	/* byte size of an address -- 4 */
+  }
+_COMP_UNIT_HEADER;
+#define _ACTUAL_COMP_UNIT_HEADER_SIZE 11
+
+/* .debug_pubnames header
+   Because of alignment constraints, this structure has padding and cannot
+   be mapped directly onto the beginning of the .debug_info section.  */
+typedef struct pubnames_header
+  {
+    unsigned int length;	/* length of the .debug_pubnames
+				   contribution  */
+    unsigned char version;	/* version number -- 2 for DWARF
+				   version 2 */
+    unsigned int info_offset;	/* offset into .debug_info section */
+    unsigned int info_size;	/* byte size of .debug_info section
+				   portion */
+  }
+_PUBNAMES_HEADER;
+#define _ACTUAL_PUBNAMES_HEADER_SIZE 13
+
+/* .debug_pubnames header
+   Because of alignment constraints, this structure has padding and cannot
+   be mapped directly onto the beginning of the .debug_info section.  */
+typedef struct aranges_header
+  {
+    unsigned int length;	/* byte len of the .debug_aranges
+				   contribution */
+    unsigned short version;	/* version number -- 2 for DWARF
+				   version 2 */
+    unsigned int info_offset;	/* offset into .debug_info section */
+    unsigned char addr_size;	/* byte size of an address */
+    unsigned char seg_size;	/* byte size of segment descriptor */
+  }
+_ARANGES_HEADER;
+#define _ACTUAL_ARANGES_HEADER_SIZE 12
+
+/* .debug_line statement program prologue
+   Because of alignment constraints, this structure has padding and cannot
+   be mapped directly onto the beginning of the .debug_info section.  */
+typedef struct statement_prologue
+  {
+    unsigned int total_length;	/* byte length of the statement
+				   information */
+    unsigned short version;	/* version number -- 2 for DWARF
+				   version 2 */
+    unsigned int prologue_length;	/* # bytes between prologue &
+					   stmt program */
+    unsigned char minimum_instruction_length;	/* byte size of
+						   smallest instr */
+    unsigned char default_is_stmt;	/* initial value of is_stmt
+					   register */
+    char line_base;
+    unsigned char line_range;
+    unsigned char opcode_base;	/* number assigned to first special
+				   opcode */
+    unsigned char *standard_opcode_lengths;
+  }
+_STATEMENT_PROLOGUE;
+
+/* offsets and sizes of debugging sections */
+
+static file_ptr dwarf_info_offset;
+static file_ptr dwarf_abbrev_offset;
+static file_ptr dwarf_line_offset;
+static file_ptr dwarf_pubnames_offset;
+static file_ptr dwarf_aranges_offset;
+static file_ptr dwarf_loc_offset;
+static file_ptr dwarf_macinfo_offset;
+static file_ptr dwarf_str_offset;
+
+static unsigned int dwarf_info_size;
+static unsigned int dwarf_abbrev_size;
+static unsigned int dwarf_line_size;
+static unsigned int dwarf_pubnames_size;
+static unsigned int dwarf_aranges_size;
+static unsigned int dwarf_loc_size;
+static unsigned int dwarf_macinfo_size;
+static unsigned int dwarf_str_size;
+
+/* names of the debugging sections */
+
+#define INFO_SECTION     ".debug_info"
+#define ABBREV_SECTION   ".debug_abbrev"
+#define LINE_SECTION     ".debug_line"
+#define PUBNAMES_SECTION ".debug_pubnames"
+#define ARANGES_SECTION  ".debug_aranges"
+#define LOC_SECTION      ".debug_loc"
+#define MACINFO_SECTION  ".debug_macinfo"
+#define STR_SECTION      ".debug_str"
+
+/* local data types */
+
+/* The data in a compilation unit header looks like this.  */
+struct comp_unit_head
+  {
+    unsigned int length;
+    short version;
+    unsigned int abbrev_offset;
+    unsigned char addr_size;
+  };
+
+/* The data in the .debug_line statement prologue looks like this.  */
+struct line_head
+  {
+    unsigned int total_length;
+    unsigned short version;
+    unsigned int prologue_length;
+    unsigned char minimum_instruction_length;
+    unsigned char default_is_stmt;
+    int line_base;
+    unsigned char line_range;
+    unsigned char opcode_base;
+    unsigned char *standard_opcode_lengths;
+  };
+
+/* When we construct a partial symbol table entry we only
+   need this much information. */
+struct partial_die_info
+  {
+    enum dwarf_tag tag;
+    unsigned char has_children;
+    unsigned char is_external;
+    unsigned char is_declaration;
+    unsigned char has_type;
+    unsigned int offset;
+    unsigned int abbrev;
+    char *name;
+    CORE_ADDR lowpc;
+    CORE_ADDR highpc;
+    struct dwarf_block *locdesc;
+    unsigned int language;
+    char *sibling;
+  };
+
+/* This data structure holds the information of an abbrev. */
+struct abbrev_info
+  {
+    unsigned int number;	/* number identifying abbrev */
+    enum dwarf_tag tag;		/* dwarf tag */
+    int has_children;		/* boolean */
+    unsigned int num_attrs;	/* number of attributes */
+    struct attr_abbrev *attrs;	/* an array of attribute descriptions */
+    struct abbrev_info *next;	/* next in chain */
+  };
+
+struct attr_abbrev
+  {
+    enum dwarf_attribute name;
+    enum dwarf_form form;
+  };
+
+/* This data structure holds a complete die structure. */
+struct die_info
+  {
+    enum dwarf_tag tag;		 /* Tag indicating type of die */
+    unsigned short has_children; /* Does the die have children */
+    unsigned int abbrev;	 /* Abbrev number */
+    unsigned int offset;	 /* Offset in .debug_info section */
+    unsigned int num_attrs;	 /* Number of attributes */
+    struct attribute *attrs;	 /* An array of attributes */
+    struct die_info *next_ref;	 /* Next die in ref hash table */
+    struct die_info *next;	 /* Next die in linked list */
+    struct type *type;		 /* Cached type information */
+  };
+
+/* Attributes have a name and a value */
+struct attribute
+  {
+    enum dwarf_attribute name;
+    enum dwarf_form form;
+    union
+      {
+	char *str;
+	struct dwarf_block *blk;
+	unsigned int unsnd;
+	int snd;
+	CORE_ADDR addr;
+      }
+    u;
+  };
+
+/* Get at parts of an attribute structure */
+
+#define DW_STRING(attr)    ((attr)->u.str)
+#define DW_UNSND(attr)     ((attr)->u.unsnd)
+#define DW_BLOCK(attr)     ((attr)->u.blk)
+#define DW_SND(attr)       ((attr)->u.snd)
+#define DW_ADDR(attr)	   ((attr)->u.addr)
+
+/* Blocks are a bunch of untyped bytes. */
+struct dwarf_block
+  {
+    unsigned int size;
+    char *data;
+  };
+
+/* We only hold one compilation unit's abbrevs in
+   memory at any one time.  */
+#ifndef ABBREV_HASH_SIZE
+#define ABBREV_HASH_SIZE 121
+#endif
+#ifndef ATTR_ALLOC_CHUNK
+#define ATTR_ALLOC_CHUNK 4
+#endif
+
+static struct abbrev_info *dwarf2_abbrevs[ABBREV_HASH_SIZE];
+
+/* A hash table of die offsets for following references.  */
+#ifndef REF_HASH_SIZE
+#define REF_HASH_SIZE 1021
+#endif
+
+static struct die_info *die_ref_table[REF_HASH_SIZE];
+
+/* Obstack for allocating temporary storage used during symbol reading.  */
+static struct obstack dwarf2_tmp_obstack;
+
+/* Offset to the first byte of the current compilation unit header,
+   for resolving relative reference dies. */
+static unsigned int cu_header_offset;
+
+/* Allocate fields for structs, unions and enums in this size.  */
+#ifndef DW_FIELD_ALLOC_CHUNK
+#define DW_FIELD_ALLOC_CHUNK 4
+#endif
+
+/* The language we are debugging.  */
+static enum language cu_language;
+static const struct language_defn *cu_language_defn;
+
+/* Actually data from the sections.  */
+static char *dwarf_info_buffer;
+static char *dwarf_abbrev_buffer;
+static char *dwarf_line_buffer;
+
+/* A zeroed version of a partial die for initialization purposes.  */
+static struct partial_die_info zeroed_partial_die;
+
+/* The generic symbol table building routines have separate lists for
+   file scope symbols and all all other scopes (local scopes).  So
+   we need to select the right one to pass to add_symbol_to_list().
+   We do it by keeping a pointer to the correct list in list_in_scope.
+
+   FIXME:  The original dwarf code just treated the file scope as the first
+   local scope, and all other local scopes as nested local scopes, and worked
+   fine.  Check to see if we really need to distinguish these
+   in buildsym.c.  */
+static struct pending **list_in_scope = &file_symbols;
+
+/* FIXME: The following variables pass additional information from
+   decode_locdesc to the caller.  */
+static int optimized_out;	/* Kludge to identify optimized out variables */
+static int isreg;		/* Kludge to identify register variables */
+static int offreg;		/* Kludge to identify basereg references */
+static int basereg;		/* Which base register is it relative to?  */
+static int islocal;		/* Kludge to identify local variables */
+
+/* DW_AT_frame_base values for the current function.
+   frame_base_reg is -1 if DW_AT_frame_base is missing, otherwise it
+   contains the register number for the frame register.
+   frame_base_offset is the offset from the frame register to the
+   virtual stack frame. */
+static int frame_base_reg;
+static CORE_ADDR frame_base_offset;
+
+/* This value is added to each symbol value.  FIXME:  Generalize to 
+   the section_offsets structure used by dbxread (once this is done,
+   pass the appropriate section number to end_symtab).  */
+static CORE_ADDR baseaddr;	/* Add to each symbol value */
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.
+   The complete dwarf information for an objfile is kept in the
+   psymbol_obstack, so that absolute die references can be handled.
+   Most of the information in this structure is related to an entire
+   object file and could be passed via the sym_private field of the objfile.
+   It is however conceivable that dwarf2 might not be the only type
+   of symbols read from an object file.  */
+
+struct dwarf2_pinfo
+{
+  /* Pointer to start of dwarf info buffer for the objfile.  */
+
+  char *dwarf_info_buffer;
+
+  /* Offset in dwarf_info_buffer for this compilation unit. */
+
+  unsigned long dwarf_info_offset;
+
+  /* Pointer to start of dwarf abbreviation buffer for the objfile.  */
+
+  char *dwarf_abbrev_buffer;
+
+  /* Size of dwarf abbreviation section for the objfile.  */
+
+  unsigned int dwarf_abbrev_size;
+
+  /* Pointer to start of dwarf line buffer for the objfile.  */
+
+  char *dwarf_line_buffer;
+};
+
+#define PST_PRIVATE(p) ((struct dwarf2_pinfo *)(p)->read_symtab_private)
+#define DWARF_INFO_BUFFER(p) (PST_PRIVATE(p)->dwarf_info_buffer)
+#define DWARF_INFO_OFFSET(p) (PST_PRIVATE(p)->dwarf_info_offset)
+#define DWARF_ABBREV_BUFFER(p) (PST_PRIVATE(p)->dwarf_abbrev_buffer)
+#define DWARF_ABBREV_SIZE(p) (PST_PRIVATE(p)->dwarf_abbrev_size)
+#define DWARF_LINE_BUFFER(p) (PST_PRIVATE(p)->dwarf_line_buffer)
+
+/* Maintain an array of referenced fundamental types for the current
+   compilation unit being read.  For DWARF version 1, we have to construct
+   the fundamental types on the fly, since no information about the
+   fundamental types is supplied.  Each such fundamental type is created by
+   calling a language dependent routine to create the type, and then a
+   pointer to that type is then placed in the array at the index specified
+   by it's FT_<TYPENAME> value.  The array has a fixed size set by the
+   FT_NUM_MEMBERS compile time constant, which is the number of predefined
+   fundamental types gdb knows how to construct.  */
+static struct type *ftypes[FT_NUM_MEMBERS];	/* Fundamental types */
+
+/* FIXME: We might want to set this from BFD via bfd_arch_bits_per_byte,
+   but this would require a corresponding change in unpack_field_as_long
+   and friends.  */
+static int bits_per_byte = 8;
+
+/* The routines that read and process dies for a C struct or C++ class
+   pass lists of data member fields and lists of member function fields
+   in an instance of a field_info structure, as defined below.  */
+struct field_info
+{
+  /* List of data member and baseclasses fields. */
+  struct nextfield
+    {
+      struct nextfield *next;
+      int accessibility;
+      int virtuality;
+      struct field field;
+    } *fields;
+
+  /* Number of fields.  */
+  int nfields;
+
+  /* Number of baseclasses.  */
+  int nbaseclasses;
+
+  /* Set if the accesibility of one of the fields is not public.  */
+  int non_public_fields;
+
+  /* Member function fields array, entries are allocated in the order they
+     are encountered in the object file.  */
+  struct nextfnfield
+    {
+      struct nextfnfield *next;
+      struct fn_field fnfield;
+    } *fnfields;
+
+  /* Member function fieldlist array, contains name of possibly overloaded
+     member function, number of overloaded member functions and a pointer
+     to the head of the member function field chain.  */
+  struct fnfieldlist
+    {
+      char *name;
+      int length;
+      struct nextfnfield *head;
+    } *fnfieldlists;
+
+  /* Number of entries in the fnfieldlists array.  */
+  int nfnfields;
+};
+
+/* FIXME: Kludge to mark a varargs function type for C++ member function
+   argument processing.  */
+#define TYPE_FLAG_VARARGS	(1 << 10)
+
+/* Dwarf2 has no clean way to discern C++ static and non-static member
+   functions. G++ helps GDB by marking the first parameter for non-static
+   member functions (which is the this pointer) as artificial.
+   We pass this information between dwarf2_add_member_fn and
+   read_subroutine_type via TYPE_FIELD_ARTIFICIAL.  */
+#define TYPE_FIELD_ARTIFICIAL	TYPE_FIELD_BITPOS
+
+/* Various complaints about symbol reading that don't abort the process */
+
+static struct complaint dwarf2_const_ignored =
+{
+  "type qualifier 'const' ignored", 0, 0
+};
+static struct complaint dwarf2_volatile_ignored =
+{
+  "type qualifier 'volatile' ignored", 0, 0
+};
+static struct complaint dwarf2_non_const_array_bound_ignored =
+{
+  "non-constant array bounds form '%s' ignored", 0, 0
+};
+static struct complaint dwarf2_missing_line_number_section =
+{
+  "missing .debug_line section", 0, 0
+};
+static struct complaint dwarf2_mangled_line_number_section =
+{
+  "mangled .debug_line section", 0, 0
+};
+static struct complaint dwarf2_unsupported_die_ref_attr =
+{
+  "unsupported die ref attribute form: '%s'", 0, 0
+};
+static struct complaint dwarf2_unsupported_stack_op =
+{
+  "unsupported stack op: '%s'", 0, 0
+};
+static struct complaint dwarf2_unsupported_tag =
+{
+  "unsupported tag: '%s'", 0, 0
+};
+static struct complaint dwarf2_unsupported_at_encoding =
+{
+  "unsupported DW_AT_encoding: '%s'", 0, 0
+};
+static struct complaint dwarf2_unsupported_at_frame_base =
+{
+  "unsupported DW_AT_frame_base for function '%s'", 0, 0
+};
+static struct complaint dwarf2_unexpected_tag =
+{
+  "unexepected tag in read_type_die: '%s'", 0, 0
+};
+static struct complaint dwarf2_missing_at_frame_base =
+{
+  "DW_AT_frame_base missing for DW_OP_fbreg", 0, 0
+};
+static struct complaint dwarf2_bad_static_member_name =
+{
+  "unrecognized static data member name '%s'", 0, 0
+};
+static struct complaint dwarf2_unsupported_accessibility =
+{
+  "unsupported accessibility %d", 0, 0
+};
+static struct complaint dwarf2_bad_member_name_complaint =
+{
+  "cannot extract member name from '%s'", 0, 0
+};
+static struct complaint dwarf2_missing_member_fn_type_complaint =
+{
+  "member function type missing for '%s'", 0, 0
+};
+static struct complaint dwarf2_vtbl_not_found_complaint =
+{
+  "virtual function table pointer not found when defining class '%s'", 0, 0
+};
+static struct complaint dwarf2_absolute_sibling_complaint =
+{
+  "ignoring absolute DW_AT_sibling", 0, 0
+};
+static struct complaint dwarf2_const_value_length_mismatch =
+{
+  "const value length mismatch for '%s', got %d, expected %d", 0, 0
+};
+static struct complaint dwarf2_unsupported_const_value_attr =
+{
+  "unsupported const value attribute form: '%s'", 0, 0
+};
+
+/* Remember the addr_size read from the dwarf.
+   If a target expects to link compilation units with differing address
+   sizes, gdb needs to be sure that the appropriate size is here for
+   whatever scope is currently getting read. */
+static int address_size;
+
+/* Some elf32 object file formats while linked for a 32 bit address
+   space contain debug information that has assumed 64 bit
+   addresses. Eg 64 bit MIPS target produced by GCC/GAS/LD where the
+   symbol table contains 32bit address values while its .debug_info
+   section contains 64 bit address values.
+   ADDRESS_SIGNIFICANT_SIZE specifies the number significant bits in
+   the ADDRESS_SIZE bytes read from the file */
+static int address_significant_size;
+
+/* Externals references.  */
+extern int info_verbose;	/* From main.c; nonzero => verbose */
+
+/* local function prototypes */
+
+static void dwarf2_locate_sections PARAMS ((bfd *, asection *, PTR));
+
+#if 0
+static void dwarf2_build_psymtabs_easy PARAMS ((struct objfile *,
+						struct section_offsets *,
+						int));
+#endif
+
+static void dwarf2_build_psymtabs_hard PARAMS ((struct objfile *,
+						struct section_offsets *,
+						int));
+
+static char *scan_partial_symbols PARAMS ((char *, struct objfile *,
+					   CORE_ADDR *, CORE_ADDR *));
+
+static void add_partial_symbol PARAMS ((struct partial_die_info *,
+					struct objfile *));
+
+static void dwarf2_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+static void psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+
+static char *dwarf2_read_section PARAMS ((struct objfile *, file_ptr,
+					  unsigned int));
+
+static void dwarf2_read_abbrevs PARAMS ((bfd *, unsigned int));
+
+static void dwarf2_empty_abbrev_table PARAMS ((PTR));
+
+static struct abbrev_info *dwarf2_lookup_abbrev PARAMS ((unsigned int));
+
+static char *read_partial_die PARAMS ((struct partial_die_info *,
+				       bfd *, char *, int *));
+
+static char *read_full_die PARAMS ((struct die_info **, bfd *, char *));
+
+static char *read_attribute PARAMS ((struct attribute *, struct attr_abbrev *,
+				     bfd *, char *));
+
+static unsigned int read_1_byte PARAMS ((bfd *, char *));
+
+static int read_1_signed_byte PARAMS ((bfd *, char *));
+
+static unsigned int read_2_bytes PARAMS ((bfd *, char *));
+
+static unsigned int read_4_bytes PARAMS ((bfd *, char *));
+
+static unsigned int read_8_bytes PARAMS ((bfd *, char *));
+
+static CORE_ADDR read_address PARAMS ((bfd *, char *));
+
+static char *read_n_bytes PARAMS ((bfd *, char *, unsigned int));
+
+static char *read_string PARAMS ((bfd *, char *, unsigned int *));
+
+static unsigned int read_unsigned_leb128 PARAMS ((bfd *, char *,
+						  unsigned int *));
+
+static int read_signed_leb128 PARAMS ((bfd *, char *, unsigned int *));
+
+static void set_cu_language PARAMS ((unsigned int));
+
+static struct attribute *dwarf_attr PARAMS ((struct die_info *,
+					     unsigned int));
+
+static void dwarf_decode_lines PARAMS ((unsigned int, char *, bfd *));
+
+static void dwarf2_start_subfile PARAMS ((char *, char *));
+
+static struct symbol *new_symbol PARAMS ((struct die_info *, struct type *,
+					  struct objfile *));
+
+static void dwarf2_const_value PARAMS ((struct attribute *, struct symbol *,
+					struct objfile *));
+
+static struct type *die_type PARAMS ((struct die_info *, struct objfile *));
+
+static struct type *die_containing_type PARAMS ((struct die_info *,
+						 struct objfile *));
+
+#if 0
+static struct type *type_at_offset PARAMS ((unsigned int, struct objfile *));
+#endif
+
+static struct type *tag_type_to_type PARAMS ((struct die_info *,
+					      struct objfile *));
+
+static void read_type_die PARAMS ((struct die_info *, struct objfile *));
+
+static void read_typedef PARAMS ((struct die_info *, struct objfile *));
+
+static void read_base_type PARAMS ((struct die_info *, struct objfile *));
+
+static void read_file_scope PARAMS ((struct die_info *, struct objfile *));
+
+static void read_func_scope PARAMS ((struct die_info *, struct objfile *));
+
+static void read_lexical_block_scope PARAMS ((struct die_info *,
+					      struct objfile *));
+
+static int dwarf2_get_pc_bounds PARAMS ((struct die_info *,
+					 CORE_ADDR *, CORE_ADDR *,
+					 struct objfile *));
+
+static void dwarf2_add_field PARAMS ((struct field_info *, struct die_info *,
+				      struct objfile *));
+
+static void dwarf2_attach_fields_to_type PARAMS ((struct field_info *,
+						  struct type *, 
+						  struct objfile *));
+
+static char *skip_member_fn_name PARAMS ((char *));
+
+static void dwarf2_add_member_fn PARAMS ((struct field_info *,
+					  struct die_info *, struct type *,
+					  struct objfile *objfile));
+
+static void dwarf2_attach_fn_fields_to_type PARAMS ((struct field_info *,
+						     struct type *,
+						     struct objfile *));
+
+static void read_structure_scope PARAMS ((struct die_info *, struct objfile *));
+
+static void read_common_block PARAMS ((struct die_info *, struct objfile *));
+
+static void read_enumeration PARAMS ((struct die_info *, struct objfile *));
+
+static struct type *dwarf_base_type PARAMS ((int, int, struct objfile *));
+
+static CORE_ADDR decode_locdesc PARAMS ((struct dwarf_block *,
+					 struct objfile *));
+
+static void read_array_type PARAMS ((struct die_info *, struct objfile *));
+
+static void read_tag_pointer_type PARAMS ((struct die_info *,
+					   struct objfile *));
+
+static void read_tag_ptr_to_member_type PARAMS ((struct die_info *,
+						 struct objfile *));
+
+static void read_tag_reference_type PARAMS ((struct die_info *,
+					     struct objfile *));
+
+static void read_tag_const_type PARAMS ((struct die_info *, struct objfile *));
+
+static void read_tag_volatile_type PARAMS ((struct die_info *,
+					    struct objfile *));
+
+static void read_tag_string_type PARAMS ((struct die_info *,
+					  struct objfile *));
+
+static void read_subroutine_type PARAMS ((struct die_info *,
+					  struct objfile *));
+
+struct die_info *read_comp_unit PARAMS ((char *, bfd *));
+
+static void free_die_list PARAMS ((struct die_info *));
+
+static void process_die PARAMS ((struct die_info *, struct objfile *));
+
+static char *dwarf2_linkage_name PARAMS ((struct die_info *));
+
+static char *dwarf_tag_name PARAMS ((unsigned int));
+
+static char *dwarf_attr_name PARAMS ((unsigned int));
+
+static char *dwarf_form_name PARAMS ((unsigned int));
+
+static char *dwarf_stack_op_name PARAMS ((unsigned int));
+
+static char *dwarf_bool_name PARAMS ((unsigned int));
+
+static char *dwarf_type_encoding_name PARAMS ((unsigned int));
+
+#if 0
+static char *dwarf_cfi_name PARAMS ((unsigned int));
+
+struct die_info *copy_die PARAMS ((struct die_info *));
+#endif
+
+struct die_info *sibling_die PARAMS ((struct die_info *));
+
+void dump_die PARAMS ((struct die_info *));
+
+void dump_die_list PARAMS ((struct die_info *));
+
+void store_in_ref_table PARAMS ((unsigned int, struct die_info *));
+
+static void dwarf2_empty_die_ref_table PARAMS ((void));
+
+static unsigned int dwarf2_get_ref_die_offset PARAMS ((struct attribute *));
+
+struct die_info *follow_die_ref PARAMS ((unsigned int));
+
+static struct type *dwarf2_fundamental_type PARAMS ((struct objfile *, int));
+
+/* memory allocation interface */
+
+static void dwarf2_free_tmp_obstack PARAMS ((PTR));
+
+static struct dwarf_block *dwarf_alloc_block PARAMS ((void));
+
+static struct abbrev_info *dwarf_alloc_abbrev PARAMS ((void));
+
+static struct die_info *dwarf_alloc_die PARAMS ((void));
+
+/* Try to locate the sections we need for DWARF 2 debugging
+   information and return true if we have enough to do something.  */
+
+int
+dwarf2_has_info (abfd)
+     bfd *abfd;
+{
+  dwarf_info_offset = dwarf_abbrev_offset = dwarf_line_offset = 0;
+  bfd_map_over_sections (abfd, dwarf2_locate_sections, NULL);
+  if (dwarf_info_offset && dwarf_abbrev_offset)
+    {
+      return 1;
+    }
+  else
+    {
+      return 0;
+    }
+}
+
+/* This function is mapped across the sections and remembers the
+   offset and size of each of the debugging sections we are interested
+   in.  */
+
+static void
+dwarf2_locate_sections (ignore_abfd, sectp, ignore_ptr)
+     bfd *ignore_abfd;
+     asection *sectp;
+     PTR ignore_ptr;
+{
+  if (STREQ (sectp->name, INFO_SECTION))
+    {
+      dwarf_info_offset = sectp->filepos;
+      dwarf_info_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, ABBREV_SECTION))
+    {
+      dwarf_abbrev_offset = sectp->filepos;
+      dwarf_abbrev_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, LINE_SECTION))
+    {
+      dwarf_line_offset = sectp->filepos;
+      dwarf_line_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, PUBNAMES_SECTION))
+    {
+      dwarf_pubnames_offset = sectp->filepos;
+      dwarf_pubnames_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, ARANGES_SECTION))
+    {
+      dwarf_aranges_offset = sectp->filepos;
+      dwarf_aranges_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, LOC_SECTION))
+    {
+      dwarf_loc_offset = sectp->filepos;
+      dwarf_loc_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, MACINFO_SECTION))
+    {
+      dwarf_macinfo_offset = sectp->filepos;
+      dwarf_macinfo_size = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp->name, STR_SECTION))
+    {
+      dwarf_str_offset = sectp->filepos;
+      dwarf_str_size = bfd_get_section_size_before_reloc (sectp);
+    }
+}
+
+/* Build a partial symbol table.  */
+
+void
+dwarf2_build_psymtabs (objfile, section_offsets, mainline)
+    struct objfile *objfile;
+    struct section_offsets *section_offsets;
+    int mainline;
+{
+
+  /* We definitely need the .debug_info and .debug_abbrev sections */
+
+  dwarf_info_buffer = dwarf2_read_section (objfile,
+					   dwarf_info_offset,
+					   dwarf_info_size);
+  dwarf_abbrev_buffer = dwarf2_read_section (objfile,
+					     dwarf_abbrev_offset,
+					     dwarf_abbrev_size);
+  dwarf_line_buffer = dwarf2_read_section (objfile,
+					   dwarf_line_offset,
+					   dwarf_line_size);
+
+  if (mainline || objfile->global_psymbols.size == 0 ||
+      objfile->static_psymbols.size == 0)
+    {
+      init_psymbol_list (objfile, 1024);
+    }
+
+#if 0
+  if (dwarf_aranges_offset && dwarf_pubnames_offset)
+    {
+      /* Things are significanlty easier if we have .debug_aranges and
+         .debug_pubnames sections */
+
+      dwarf2_build_psymtabs_easy (objfile, section_offsets, mainline);
+    }
+  else
+#endif
+    /* only test this case for now */
+    {		
+      /* In this case we have to work a bit harder */
+      dwarf2_build_psymtabs_hard (objfile, section_offsets, mainline);
+    }
+}
+
+#if 0
+/* Build the partial symbol table from the information in the
+   .debug_pubnames and .debug_aranges sections.  */
+
+static void
+dwarf2_build_psymtabs_easy (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile->obfd;
+  char *aranges_buffer, *pubnames_buffer;
+  char *aranges_ptr, *pubnames_ptr;
+  unsigned int entry_length, version, info_offset, info_size;
+
+  pubnames_buffer = dwarf2_read_section (objfile,
+					 dwarf_pubnames_offset,
+					 dwarf_pubnames_size);
+  pubnames_ptr = pubnames_buffer;
+  while ((pubnames_ptr - pubnames_buffer) < dwarf_pubnames_size)
+    {
+      entry_length = read_4_bytes (abfd, pubnames_ptr);
+      pubnames_ptr += 4;
+      version = read_1_byte (abfd, pubnames_ptr);
+      pubnames_ptr += 1;
+      info_offset = read_4_bytes (abfd, pubnames_ptr);
+      pubnames_ptr += 4;
+      info_size = read_4_bytes (abfd, pubnames_ptr);
+      pubnames_ptr += 4;
+    }
+
+  aranges_buffer = dwarf2_read_section (objfile,
+					dwarf_aranges_offset,
+					dwarf_aranges_size);
+
+}
+#endif
+
+/* Build the partial symbol table by doing a quick pass through the
+   .debug_info and .debug_abbrev sections.  */
+
+static void
+dwarf2_build_psymtabs_hard (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  /* Instead of reading this into a big buffer, we should probably use
+     mmap()  on architectures that support it. (FIXME) */
+  bfd *abfd = objfile->obfd;
+  char *info_ptr, *abbrev_ptr;
+  char *beg_of_comp_unit;
+  struct comp_unit_head cu_header;
+  struct partial_die_info comp_unit_die;
+  struct partial_symtab *pst;
+  struct cleanup *back_to;
+  int comp_unit_has_pc_info;
+  CORE_ADDR lowpc, highpc;
+
+  /* Number of bytes of any addresses that are signficant */
+  address_significant_size = get_elf_backend_data (abfd)->s->arch_size / 8;
+
+  info_ptr = dwarf_info_buffer;
+  abbrev_ptr = dwarf_abbrev_buffer;
+
+  obstack_init (&dwarf2_tmp_obstack);
+  back_to = make_cleanup (dwarf2_free_tmp_obstack, NULL);
+
+  while ((unsigned int) (info_ptr - dwarf_info_buffer)
+	  + ((info_ptr - dwarf_info_buffer) % 4) < dwarf_info_size)
+    {
+      beg_of_comp_unit = info_ptr;
+      cu_header.length = read_4_bytes (abfd, info_ptr);
+      info_ptr += 4;
+      cu_header.version = read_2_bytes (abfd, info_ptr);
+      info_ptr += 2;
+      cu_header.abbrev_offset = read_4_bytes (abfd, info_ptr);
+      info_ptr += 4;
+      cu_header.addr_size = read_1_byte (abfd, info_ptr);
+      info_ptr += 1;
+      address_size = cu_header.addr_size;
+
+      if (cu_header.version != 2)
+	{
+	  error ("Dwarf Error: wrong version in compilation unit header.");
+	  return;
+	}
+      if (cu_header.abbrev_offset >= dwarf_abbrev_size)
+	{
+	  error ("Dwarf Error: bad offset (0x%lx) in compilation unit header (offset 0x%lx + 6).",
+		 (long) cu_header.abbrev_offset,
+		 (long) (beg_of_comp_unit - dwarf_info_buffer));
+	  return;
+	}
+      if (beg_of_comp_unit + cu_header.length + 4
+	  > dwarf_info_buffer + dwarf_info_size)
+	{
+	  error ("Dwarf Error: bad length (0x%lx) in compilation unit header (offset 0x%lx + 0).",
+		 (long) cu_header.length,
+		 (long) (beg_of_comp_unit - dwarf_info_buffer));
+	  return;
+	}
+      if (address_size < address_significant_size)
+	{
+	  error ("Dwarf Error: bad address size (%ld) in compilation unit header (offset 0x%lx + 11).",
+		 (long) cu_header.addr_size,
+		 (long) (beg_of_comp_unit - dwarf_info_buffer));
+	}
+
+      /* Read the abbrevs for this compilation unit into a table */
+      dwarf2_read_abbrevs (abfd, cu_header.abbrev_offset);
+      make_cleanup (dwarf2_empty_abbrev_table, NULL);
+
+      /* Read the compilation unit die */
+      info_ptr = read_partial_die (&comp_unit_die, abfd,
+				   info_ptr, &comp_unit_has_pc_info);
+
+      /* Set the language we're debugging */
+      set_cu_language (comp_unit_die.language);
+
+      /* Allocate a new partial symbol table structure */
+      pst = start_psymtab_common (objfile, section_offsets,
+			          comp_unit_die.name ? comp_unit_die.name : "",
+				  comp_unit_die.lowpc,
+				  objfile->global_psymbols.next,
+				  objfile->static_psymbols.next);
+
+      pst->read_symtab_private = (char *)
+	obstack_alloc (&objfile->psymbol_obstack, sizeof (struct dwarf2_pinfo));
+      cu_header_offset = beg_of_comp_unit - dwarf_info_buffer;
+      DWARF_INFO_BUFFER(pst) = dwarf_info_buffer;
+      DWARF_INFO_OFFSET(pst) = beg_of_comp_unit - dwarf_info_buffer;
+      DWARF_ABBREV_BUFFER(pst) = dwarf_abbrev_buffer;
+      DWARF_ABBREV_SIZE(pst) = dwarf_abbrev_size;
+      DWARF_LINE_BUFFER(pst) = dwarf_line_buffer;
+      baseaddr = ANOFFSET (section_offsets, 0);
+
+      /* Store the function that reads in the rest of the symbol table */
+      pst->read_symtab = dwarf2_psymtab_to_symtab;
+
+      /* Check if comp unit has_children.
+         If so, read the rest of the partial symbols from this comp unit.
+         If not, there's no more debug_info for this comp unit. */
+      if (comp_unit_die.has_children)
+	{
+	  info_ptr = scan_partial_symbols (info_ptr, objfile, &lowpc, &highpc);
+
+	  /* If the compilation unit didn't have an explicit address range,
+	     then use the information extracted from its child dies.  */
+	  if (!comp_unit_has_pc_info)
+	    {
+	      comp_unit_die.lowpc  = lowpc;
+	      comp_unit_die.highpc = highpc;
+	    }
+	}
+      pst->textlow  = comp_unit_die.lowpc + baseaddr;
+      pst->texthigh = comp_unit_die.highpc + baseaddr;
+
+      pst->n_global_syms = objfile->global_psymbols.next -
+	(objfile->global_psymbols.list + pst->globals_offset);
+      pst->n_static_syms = objfile->static_psymbols.next -
+	(objfile->static_psymbols.list + pst->statics_offset);
+      sort_pst_symbols (pst);
+
+      /* If there is already a psymtab or symtab for a file of this
+         name, remove it. (If there is a symtab, more drastic things
+         also happen.) This happens in VxWorks.  */
+      free_named_symtabs (pst->filename);
+
+      info_ptr = beg_of_comp_unit + cu_header.length + 4;
+    }
+  do_cleanups (back_to);
+}
+
+/* Read in all interesting dies to the end of the compilation unit.  */
+
+static char *
+scan_partial_symbols (info_ptr, objfile, lowpc, highpc)
+     char *info_ptr;
+     struct objfile *objfile;
+     CORE_ADDR *lowpc;
+     CORE_ADDR *highpc;
+{
+  bfd *abfd = objfile->obfd;
+  struct partial_die_info pdi;
+
+  /* This function is called after we've read in the comp_unit_die in
+     order to read its children.  We start the nesting level at 1 since
+     we have pushed 1 level down in order to read the comp unit's children.
+     The comp unit itself is at level 0, so we stop reading when we pop
+     back to that level. */
+
+  int nesting_level = 1;
+  int has_pc_info;
+  
+  *lowpc  = ((CORE_ADDR) -1);
+  *highpc = ((CORE_ADDR) 0);
+
+  while (nesting_level)
+    {
+      info_ptr = read_partial_die (&pdi, abfd, info_ptr, &has_pc_info);
+
+      if (pdi.name)
+	{
+	  switch (pdi.tag)
+	    {
+	    case DW_TAG_subprogram:
+	      if (has_pc_info)
+		{
+		  if (pdi.lowpc < *lowpc)
+		    {
+		      *lowpc = pdi.lowpc;
+		    }
+		  if (pdi.highpc > *highpc)
+		    {
+		      *highpc = pdi.highpc;
+		    }
+		  if ((pdi.is_external || nesting_level == 1)
+		      && !pdi.is_declaration)
+		    {
+		      add_partial_symbol (&pdi, objfile);
+		    }
+		}
+	      break;
+	    case DW_TAG_variable:
+	    case DW_TAG_typedef:
+	    case DW_TAG_class_type:
+	    case DW_TAG_structure_type:
+	    case DW_TAG_union_type:
+	    case DW_TAG_enumeration_type:
+	      if ((pdi.is_external || nesting_level == 1)
+		  && !pdi.is_declaration)
+		{
+		  add_partial_symbol (&pdi, objfile);
+		}
+	      break;
+	    case DW_TAG_enumerator:
+	      /* File scope enumerators are added to the partial symbol
+		 table.  */
+	      if (nesting_level == 2)
+		add_partial_symbol (&pdi, objfile);
+	      break;
+	    case DW_TAG_base_type:
+	      /* File scope base type definitions are added to the partial
+		 symbol table.  */
+	      if (nesting_level == 1)
+		add_partial_symbol (&pdi, objfile);
+	      break;
+	    default:
+	      break;
+	    }
+	}
+
+      /* If the die has a sibling, skip to the sibling.
+	 Do not skip enumeration types, we want to record their
+	 enumerators.  */
+      if (pdi.sibling && pdi.tag != DW_TAG_enumeration_type)
+	{
+	  info_ptr = pdi.sibling;
+	}
+      else if (pdi.has_children)
+	{
+	  /* Die has children, but the optional DW_AT_sibling attribute
+	     is missing.  */
+	  nesting_level++;
+	}
+
+      if (pdi.tag == 0)
+	{
+	  nesting_level--;
+	}
+    }
+
+  /* If we didn't find a lowpc, set it to highpc to avoid complaints
+     from `maint check'.  */
+  if (*lowpc == ((CORE_ADDR) -1))
+    *lowpc = *highpc;
+  return info_ptr;
+}
+
+static void
+add_partial_symbol (pdi, objfile)
+     struct partial_die_info *pdi;
+     struct objfile *objfile;
+{
+  CORE_ADDR addr = 0;
+
+  switch (pdi->tag)
+    {
+    case DW_TAG_subprogram:
+      if (pdi->is_external)
+	{
+	  /*prim_record_minimal_symbol (pdi->name, pdi->lowpc + baseaddr,
+				      mst_text, objfile);*/
+	  add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			       VAR_NAMESPACE, LOC_BLOCK,
+			       &objfile->global_psymbols,
+			       0, pdi->lowpc + baseaddr, cu_language, objfile);
+	}
+      else
+	{
+	  /*prim_record_minimal_symbol (pdi->name, pdi->lowpc + baseaddr,
+				      mst_file_text, objfile);*/
+	  add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			       VAR_NAMESPACE, LOC_BLOCK,
+			       &objfile->static_psymbols,
+			       0, pdi->lowpc + baseaddr, cu_language, objfile);
+	}
+      break;
+    case DW_TAG_variable:
+      if (pdi->is_external)
+	{
+	  /* Global Variable.
+	     Don't enter into the minimal symbol tables as there is
+	     a minimal symbol table entry from the ELF symbols already.
+	     Enter into partial symbol table if it has a location
+	     descriptor or a type.
+	     If the location descriptor is missing, new_symbol will create
+	     a LOC_UNRESOLVED symbol, the address of the variable will then
+	     be determined from the minimal symbol table whenever the variable
+	     is referenced.
+	     The address for the partial symbol table entry is not
+	     used by GDB, but it comes in handy for debugging partial symbol
+	     table building.  */
+
+	  if (pdi->locdesc)
+	    addr = decode_locdesc (pdi->locdesc, objfile);
+	  if (pdi->locdesc || pdi->has_type)
+	    add_psymbol_to_list (pdi->name, strlen (pdi->name),
+				 VAR_NAMESPACE, LOC_STATIC,
+				 &objfile->global_psymbols,
+				 0, addr + baseaddr, cu_language, objfile);
+	}
+      else
+	{
+	  /* Static Variable. Skip symbols without location descriptors.  */
+	  if (pdi->locdesc == NULL)
+	    return;
+	  addr = decode_locdesc (pdi->locdesc, objfile);
+	  /*prim_record_minimal_symbol (pdi->name, addr + baseaddr,
+				      mst_file_data, objfile);*/
+	  add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			       VAR_NAMESPACE, LOC_STATIC,
+			       &objfile->static_psymbols,
+			       0, addr + baseaddr, cu_language, objfile);
+	}
+      break;
+    case DW_TAG_typedef:
+    case DW_TAG_base_type:
+      add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			   VAR_NAMESPACE, LOC_TYPEDEF,
+			   &objfile->static_psymbols,
+			   0, (CORE_ADDR) 0, cu_language, objfile);
+      break;
+    case DW_TAG_class_type:
+    case DW_TAG_structure_type:
+    case DW_TAG_union_type:
+    case DW_TAG_enumeration_type:
+      /* Skip aggregate types without children, these are external
+	 references.  */
+      if (pdi->has_children == 0)
+	return;
+      add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			   STRUCT_NAMESPACE, LOC_TYPEDEF,
+			   &objfile->static_psymbols,
+			   0, (CORE_ADDR) 0, cu_language, objfile);
+
+      if (cu_language == language_cplus)
+	{
+	  /* For C++, these implicitly act as typedefs as well. */
+	  add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			       VAR_NAMESPACE, LOC_TYPEDEF,
+			       &objfile->static_psymbols,
+			       0, (CORE_ADDR) 0, cu_language, objfile);
+	}
+      break;
+    case DW_TAG_enumerator:
+      add_psymbol_to_list (pdi->name, strlen (pdi->name),
+			   VAR_NAMESPACE, LOC_CONST,
+			   &objfile->static_psymbols,
+			   0, (CORE_ADDR) 0, cu_language, objfile);
+      break;
+    default:
+      break;
+    }
+}
+
+/* Expand this partial symbol table into a full symbol table.  */
+
+static void
+dwarf2_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  /* FIXME: This is barely more than a stub.  */
+  if (pst != NULL)
+    {
+      if (pst->readin)
+	{
+	  warning ("bug: psymtab for %s is already read in.", pst->filename);
+	}
+      else
+	{
+	  if (info_verbose)
+	    {
+	      printf_filtered ("Reading in symbols for %s...", pst->filename);
+	      gdb_flush (gdb_stdout);
+	    }
+
+	  psymtab_to_symtab_1 (pst);
+
+	  /* Finish up the debug error message.  */
+	  if (info_verbose)
+	    printf_filtered ("done.\n");
+	}
+    }
+}
+
+static void
+psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct objfile *objfile = pst->objfile;
+  bfd *abfd = objfile->obfd;
+  struct comp_unit_head cu_header;
+  struct die_info *dies;
+  unsigned long offset;
+  CORE_ADDR lowpc, highpc;
+  struct die_info *child_die;
+  char *info_ptr;
+  struct symtab *symtab;
+  struct cleanup *back_to;
+
+  /* Set local variables from the partial symbol table info.  */
+  offset = DWARF_INFO_OFFSET(pst);
+  dwarf_info_buffer = DWARF_INFO_BUFFER(pst);
+  dwarf_abbrev_buffer = DWARF_ABBREV_BUFFER(pst);
+  dwarf_abbrev_size = DWARF_ABBREV_SIZE(pst);
+  dwarf_line_buffer = DWARF_LINE_BUFFER(pst);
+  baseaddr = ANOFFSET (pst->section_offsets, 0);
+  cu_header_offset = offset;
+  info_ptr = dwarf_info_buffer + offset;
+
+  obstack_init (&dwarf2_tmp_obstack);
+  back_to = make_cleanup (dwarf2_free_tmp_obstack, NULL);
+
+  buildsym_init ();
+  make_cleanup ((make_cleanup_func) really_free_pendings, NULL);
+
+  /* read in the comp_unit header  */
+  cu_header.length = read_4_bytes (abfd, info_ptr);
+  info_ptr += 4;
+  cu_header.version = read_2_bytes (abfd, info_ptr);
+  info_ptr += 2;
+  cu_header.abbrev_offset = read_4_bytes (abfd, info_ptr);
+  info_ptr += 4;
+  cu_header.addr_size = read_1_byte (abfd, info_ptr);
+  info_ptr += 1;
+
+  /* Read the abbrevs for this compilation unit  */
+  dwarf2_read_abbrevs (abfd, cu_header.abbrev_offset);
+  make_cleanup (dwarf2_empty_abbrev_table, NULL);
+
+  dies = read_comp_unit (info_ptr, abfd);
+
+  make_cleanup ((make_cleanup_func) free_die_list, dies);
+
+  /* Do line number decoding in read_file_scope () */
+  process_die (dies, objfile);
+
+  if (!dwarf2_get_pc_bounds (dies, &lowpc, &highpc, objfile))
+    {
+      /* Some compilers don't define a DW_AT_high_pc attribute for
+	 the compilation unit.   If the DW_AT_high_pc is missing,
+	 synthesize it, by scanning the DIE's below the compilation unit.  */
+      highpc = 0;
+      if (dies->has_children)
+	{
+	  child_die = dies->next;
+	  while (child_die && child_die->tag)
+	    {
+	      if (child_die->tag == DW_TAG_subprogram)
+		{
+		  CORE_ADDR low, high;
+
+		  if (dwarf2_get_pc_bounds (child_die, &low, &high, objfile))
+		    {
+		      highpc = max (highpc, high);
+		    }
+		}
+	      child_die = sibling_die (child_die);
+	    }
+	}
+    }
+  symtab = end_symtab (highpc + baseaddr, objfile, 0);
+
+  /* Set symtab language to language from DW_AT_language.
+     If the compilation is from a C file generated by language preprocessors,
+     do not set the language if it was already deduced by start_subfile.  */
+  if (symtab != NULL
+      && !(cu_language == language_c && symtab->language != language_c))
+    {
+      symtab->language = cu_language;
+    }
+  pst->symtab = symtab;
+  pst->readin = 1;
+  sort_symtab_syms (pst->symtab);
+
+  do_cleanups (back_to);
+}
+
+/* Process a die and its children.  */
+
+static void
+process_die (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  switch (die->tag)
+    {
+    case DW_TAG_padding:
+      break;
+    case DW_TAG_compile_unit:
+      read_file_scope (die, objfile);
+      break;
+    case DW_TAG_subprogram:
+      read_subroutine_type (die, objfile);
+      read_func_scope (die, objfile);
+      break;
+    case DW_TAG_inlined_subroutine:
+      /* FIXME:  These are ignored for now.
+	 They could be used to set breakpoints on all inlined instances
+	 of a function and make GDB `next' properly over inlined functions.  */
+      break;
+    case DW_TAG_lexical_block:
+      read_lexical_block_scope (die, objfile);
+      break;
+    case DW_TAG_class_type:
+    case DW_TAG_structure_type:
+    case DW_TAG_union_type:
+      read_structure_scope (die, objfile);
+      break;
+    case DW_TAG_enumeration_type:
+      read_enumeration (die, objfile);
+      break;
+    case DW_TAG_subroutine_type:
+      read_subroutine_type (die, objfile);
+      break;
+    case DW_TAG_array_type:
+      read_array_type (die, objfile);
+      break;
+    case DW_TAG_pointer_type:
+      read_tag_pointer_type (die, objfile);
+      break;
+    case DW_TAG_ptr_to_member_type:
+      read_tag_ptr_to_member_type (die, objfile);
+      break;
+    case DW_TAG_reference_type:
+      read_tag_reference_type (die, objfile);
+      break;
+    case DW_TAG_string_type:
+      read_tag_string_type (die, objfile);
+      break;
+    case DW_TAG_base_type:
+      read_base_type (die, objfile);
+      if (dwarf_attr (die, DW_AT_name))
+	{
+	  /* Add a typedef symbol for the base type definition.  */
+	  new_symbol (die, die->type, objfile);
+	}
+      break;
+    case DW_TAG_common_block:
+      read_common_block (die, objfile);
+      break;
+    case DW_TAG_common_inclusion:
+      break;
+    default:
+      new_symbol (die, NULL, objfile);
+      break;
+    }
+}
+
+static void
+read_file_scope (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  unsigned int line_offset = 0;
+  CORE_ADDR lowpc  = ((CORE_ADDR) -1);
+  CORE_ADDR highpc = ((CORE_ADDR) 0);
+  struct attribute *attr;
+  char *name = "<unknown>";
+  char *comp_dir = NULL;
+  struct die_info *child_die;
+  bfd *abfd = objfile->obfd;
+
+  if (!dwarf2_get_pc_bounds (die, &lowpc, &highpc, objfile))
+    {
+      if (die->has_children)
+	{
+	  child_die = die->next;
+	  while (child_die && child_die->tag)
+	    {
+	      if (child_die->tag == DW_TAG_subprogram)
+		{
+		  CORE_ADDR low, high;
+
+		  if (dwarf2_get_pc_bounds (child_die, &low, &high, objfile))
+		    {
+		      lowpc = min (lowpc, low);
+		      highpc = max (highpc, high);
+		    }
+		}
+	      child_die = sibling_die (child_die);
+	    }
+	}
+    }
+
+  /* If we didn't find a lowpc, set it to highpc to avoid complaints
+     from finish_block.  */
+  if (lowpc == ((CORE_ADDR) -1))
+    lowpc = highpc;
+  lowpc += baseaddr;
+  highpc += baseaddr;
+
+  attr = dwarf_attr (die, DW_AT_name);
+  if (attr)
+    {
+      name = DW_STRING (attr);
+    }
+  attr = dwarf_attr (die, DW_AT_comp_dir);
+  if (attr)
+    {
+      comp_dir = DW_STRING (attr);
+      if (comp_dir)
+	{
+	  /* Irix 6.2 native cc prepends <machine>.: to the compilation
+	     directory, get rid of it.  */
+	  char *cp = strchr (comp_dir, ':');
+
+	  if (cp && cp != comp_dir && cp[-1] == '.' && cp[1] == '/')
+	    comp_dir = cp + 1;
+	}
+    }
+
+  if (objfile->ei.entry_point >= lowpc &&
+      objfile->ei.entry_point < highpc)
+    {
+      objfile->ei.entry_file_lowpc = lowpc;
+      objfile->ei.entry_file_highpc = highpc;
+    }
+
+  attr = dwarf_attr (die, DW_AT_language);
+  if (attr)
+    {
+      set_cu_language (DW_UNSND (attr));
+    }
+
+  /* We assume that we're processing GCC output. */
+  processing_gcc_compilation = 2;
+#if 0
+    /* FIXME:Do something here.  */
+    if (dip->at_producer != NULL)
+    {
+      handle_producer (dip->at_producer);
+    }
+#endif
+
+  /* The compilation unit may be in a different language or objfile,
+     zero out all remembered fundamental types.  */
+  memset (ftypes, 0, FT_NUM_MEMBERS * sizeof (struct type *));
+
+  start_symtab (name, comp_dir, lowpc);
+  record_debugformat ("DWARF 2");
+
+  /* Decode line number information if present.  */
+  attr = dwarf_attr (die, DW_AT_stmt_list);
+  if (attr)
+    {
+      line_offset = DW_UNSND (attr);
+      dwarf_decode_lines (line_offset, comp_dir, abfd);
+    }
+
+  /* Process all dies in compilation unit.  */
+  if (die->has_children)
+    {
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  process_die (child_die, objfile);
+	  child_die = sibling_die (child_die);
+	}
+    }
+}
+
+static void
+read_func_scope (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+  CORE_ADDR lowpc;
+  CORE_ADDR highpc;
+  struct die_info *child_die;
+  struct attribute *attr;
+  char *name;
+
+  name = dwarf2_linkage_name (die);
+
+  /* Ignore functions with missing or empty names and functions with
+     missing or invalid low and high pc attributes.  */
+  if (name == NULL || !dwarf2_get_pc_bounds (die, &lowpc, &highpc, objfile))
+    return;
+
+  lowpc += baseaddr;
+  highpc += baseaddr;
+
+  if (objfile->ei.entry_point >= lowpc &&
+      objfile->ei.entry_point < highpc)
+    {
+      objfile->ei.entry_func_lowpc = lowpc;
+      objfile->ei.entry_func_highpc = highpc;
+    }
+
+  if (STREQ (name, "main"))	/* FIXME: hardwired name */
+    {
+      objfile->ei.main_func_lowpc = lowpc;
+      objfile->ei.main_func_highpc = highpc;
+    }
+
+  /* Decode DW_AT_frame_base location descriptor if present, keep result
+     for DW_OP_fbreg operands in decode_locdesc.  */
+  frame_base_reg = -1;
+  frame_base_offset = 0;
+  attr = dwarf_attr (die, DW_AT_frame_base);
+  if (attr)
+    {
+      CORE_ADDR addr = decode_locdesc (DW_BLOCK (attr), objfile);
+      if (isreg)
+	frame_base_reg = addr;
+      else if (offreg)
+	{
+	  frame_base_reg = basereg;
+	  frame_base_offset = addr;
+	}
+      else
+	complain (&dwarf2_unsupported_at_frame_base, name);
+    }
+
+  new = push_context (0, lowpc);
+  new->name = new_symbol (die, die->type, objfile);
+  list_in_scope = &local_symbols;
+
+  if (die->has_children)
+    {
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  process_die (child_die, objfile);
+	  child_die = sibling_die (child_die);
+	}
+    }
+
+  new = pop_context ();
+  /* Make a block for the local symbols within.  */
+  finish_block (new->name, &local_symbols, new->old_blocks,
+		lowpc, highpc, objfile);
+  list_in_scope = &file_symbols;
+}
+
+/* Process all the DIES contained within a lexical block scope.  Start
+   a new scope, process the dies, and then close the scope.  */
+
+static void
+read_lexical_block_scope (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+  CORE_ADDR lowpc, highpc;
+  struct die_info *child_die;
+
+  /* Ignore blocks with missing or invalid low and high pc attributes.  */
+  if (!dwarf2_get_pc_bounds (die, &lowpc, &highpc, objfile))
+    return;
+  lowpc += baseaddr;
+  highpc += baseaddr;
+
+  push_context (0, lowpc);
+  if (die->has_children)
+    {
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  process_die (child_die, objfile);
+	  child_die = sibling_die (child_die);
+	}
+    }
+  new = pop_context ();
+
+  if (local_symbols != NULL)
+    {
+      finish_block (0, &local_symbols, new->old_blocks, new->start_addr,
+		    highpc, objfile);
+    }
+  local_symbols = new->locals;
+}
+
+/* Get low and high pc attributes from a die.
+   Return 1 if the attributes are present and valid, otherwise, return 0.  */
+
+static int
+dwarf2_get_pc_bounds (die, lowpc, highpc, objfile)
+     struct die_info *die;
+     CORE_ADDR *lowpc;
+     CORE_ADDR *highpc;
+     struct objfile *objfile;
+{
+  struct attribute *attr;
+  CORE_ADDR low;
+  CORE_ADDR high;
+
+  attr = dwarf_attr (die, DW_AT_low_pc);
+  if (attr)
+    low = DW_ADDR (attr);
+  else
+    return 0;
+  attr = dwarf_attr (die, DW_AT_high_pc);
+  if (attr)
+    high = DW_ADDR (attr);
+  else
+    return 0;
+
+  if (high < low)
+    return 0;
+
+  /* When using the GNU linker, .gnu.linkonce. sections are used to
+     eliminate duplicate copies of functions and vtables and such.
+     The linker will arbitrarily choose one and discard the others.
+     The AT_*_pc values for such functions refer to local labels in
+     these sections.  If the section from that file was discarded, the
+     labels are not in the output, so the relocs get a value of 0.
+     If this is a discarded function, mark the pc bounds as invalid,
+     so that GDB will ignore it.  */
+  if (low == 0 && (bfd_get_file_flags (objfile->obfd) & HAS_RELOC) == 0)
+    return 0;
+
+  *lowpc = low;
+  *highpc = high;
+  return 1;
+}
+
+/* Add an aggregate field to the field list.  */
+
+static void
+dwarf2_add_field (fip, die, objfile)
+     struct field_info *fip;
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct nextfield *new_field;
+  struct attribute *attr;
+  struct field *fp;
+  char *fieldname = "";
+
+  /* Allocate a new field list entry and link it in.  */
+  new_field = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+  make_cleanup (free, new_field);
+  memset (new_field, 0, sizeof (struct nextfield));
+  new_field->next = fip->fields;
+  fip->fields = new_field;
+  fip->nfields++;
+
+  /* Handle accessibility and virtuality of field.
+     The default accessibility for members is public, the default
+     accessibility for inheritance is private.  */
+  if (die->tag != DW_TAG_inheritance)
+    new_field->accessibility = DW_ACCESS_public;
+  else
+    new_field->accessibility = DW_ACCESS_private;
+  new_field->virtuality = DW_VIRTUALITY_none;
+
+  attr = dwarf_attr (die, DW_AT_accessibility);
+  if (attr)
+    new_field->accessibility = DW_UNSND (attr);
+  if (new_field->accessibility != DW_ACCESS_public)
+    fip->non_public_fields = 1;
+  attr = dwarf_attr (die, DW_AT_virtuality);
+  if (attr)
+    new_field->virtuality = DW_UNSND (attr);
+
+  fp = &new_field->field;
+  if (die->tag == DW_TAG_member)
+    {
+      /* Get type of field.  */
+      fp->type = die_type (die, objfile);
+
+      /* Get bit size of field (zero if none).  */
+      attr = dwarf_attr (die, DW_AT_bit_size);
+      if (attr)
+	{
+	  FIELD_BITSIZE (*fp) = DW_UNSND (attr);
+	}
+      else
+	{
+	  FIELD_BITSIZE (*fp) = 0;
+	}
+
+      /* Get bit offset of field.  */
+      attr = dwarf_attr (die, DW_AT_data_member_location);
+      if (attr)
+	{
+	  FIELD_BITPOS (*fp) =
+	    decode_locdesc (DW_BLOCK (attr), objfile) * bits_per_byte;
+	}
+      else
+	FIELD_BITPOS (*fp) = 0;
+      attr = dwarf_attr (die, DW_AT_bit_offset);
+      if (attr)
+	{
+	  if (BITS_BIG_ENDIAN)
+	    {
+	      /* For big endian bits, the DW_AT_bit_offset gives the
+		 additional bit offset from the MSB of the containing
+		 anonymous object to the MSB of the field.  We don't
+		 have to do anything special since we don't need to
+		 know the size of the anonymous object.  */
+	      FIELD_BITPOS (*fp) += DW_UNSND (attr);
+	    }
+	  else
+	    {
+	      /* For little endian bits, compute the bit offset to the
+		 MSB of the anonymous object, subtract off the number of
+		 bits from the MSB of the field to the MSB of the
+		 object, and then subtract off the number of bits of
+		 the field itself.  The result is the bit offset of
+		 the LSB of the field.  */
+	      int anonymous_size;
+	      int bit_offset = DW_UNSND (attr);
+
+	      attr = dwarf_attr (die, DW_AT_byte_size);
+	      if (attr)
+		{
+		  /* The size of the anonymous object containing
+		     the bit field is explicit, so use the
+		     indicated size (in bytes).  */
+		  anonymous_size = DW_UNSND (attr);
+		}
+	      else
+		{
+		  /* The size of the anonymous object containing
+		     the bit field must be inferred from the type
+		     attribute of the data member containing the
+		     bit field.  */
+		  anonymous_size = TYPE_LENGTH (fp->type);
+		}
+	      FIELD_BITPOS (*fp) += anonymous_size * bits_per_byte
+		- bit_offset - FIELD_BITSIZE (*fp);
+	    }
+	}
+
+      /* Get name of field.  */
+      attr = dwarf_attr (die, DW_AT_name);
+      if (attr && DW_STRING (attr))
+	fieldname = DW_STRING (attr);
+      fp->name = obsavestring (fieldname, strlen (fieldname),
+			       &objfile->type_obstack);
+
+      /* Change accessibility for artificial fields (e.g. virtual table
+	 pointer or virtual base class pointer) to private.  */
+      if (dwarf_attr (die, DW_AT_artificial))
+	{
+	  new_field->accessibility = DW_ACCESS_private;
+	  fip->non_public_fields = 1;
+	}
+    }
+  else if (die->tag == DW_TAG_variable)
+    {
+      char *physname;
+      char *cp;
+
+      /* C++ static member.
+	 Get physical name, extract field name from physical name.  */
+      physname = dwarf2_linkage_name (die);
+      if (physname == NULL)
+	return;
+
+      cp = physname;
+      while (*cp && !is_cplus_marker (*cp))
+	cp++;
+      if (*cp)
+	fieldname = cp + 1;
+      if (*fieldname == '\0')
+	{
+	  complain (&dwarf2_bad_static_member_name, physname);
+	}
+
+      SET_FIELD_PHYSNAME (*fp, obsavestring (physname, strlen (physname),
+					    &objfile->type_obstack));
+      FIELD_TYPE (*fp) = die_type (die, objfile);
+      FIELD_NAME (*fp) = obsavestring (fieldname, strlen (fieldname),
+			       &objfile->type_obstack);
+    }
+  else if (die->tag == DW_TAG_inheritance)
+    {
+      /* C++ base class field.  */
+      attr = dwarf_attr (die, DW_AT_data_member_location);
+      if (attr)
+	FIELD_BITPOS (*fp) = decode_locdesc (DW_BLOCK (attr), objfile) * bits_per_byte;
+      FIELD_BITSIZE (*fp) = 0;
+      FIELD_TYPE (*fp) = die_type (die, objfile);
+      FIELD_NAME (*fp) = type_name_no_tag (fp->type);
+      fip->nbaseclasses++;
+    }
+}
+
+/* Create the vector of fields, and attach it to the type.  */
+
+static void
+dwarf2_attach_fields_to_type (fip, type, objfile)
+     struct field_info *fip;
+     struct type *type;
+     struct objfile *objfile;
+{
+  int nfields = fip->nfields;
+
+  /* Record the field count, allocate space for the array of fields,
+     and create blank accessibility bitfields if necessary.  */
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nfields);
+  memset (TYPE_FIELDS (type), 0, sizeof (struct field) * nfields);
+
+  if (fip->non_public_fields)
+    {
+      ALLOCATE_CPLUS_STRUCT_TYPE (type);
+
+      TYPE_FIELD_PRIVATE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PRIVATE_BITS (type), nfields);
+
+      TYPE_FIELD_PROTECTED_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PROTECTED_BITS (type), nfields);
+
+      TYPE_FIELD_IGNORE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_IGNORE_BITS (type), nfields);
+    }
+
+  /* If the type has baseclasses, allocate and clear a bit vector for
+     TYPE_FIELD_VIRTUAL_BITS.  */
+  if (fip->nbaseclasses)
+    {
+      int num_bytes = B_BYTES (fip->nbaseclasses);
+      char *pointer;
+
+      ALLOCATE_CPLUS_STRUCT_TYPE (type);
+      pointer = (char *) TYPE_ALLOC (type, num_bytes);
+      TYPE_FIELD_VIRTUAL_BITS (type) = (B_TYPE *) pointer;
+      B_CLRALL (TYPE_FIELD_VIRTUAL_BITS (type), fip->nbaseclasses);
+      TYPE_N_BASECLASSES (type) = fip->nbaseclasses;
+    }
+
+  /* Copy the saved-up fields into the field vector.  Start from the head
+     of the list, adding to the tail of the field array, so that they end
+     up in the same order in the array in which they were added to the list.  */
+  while (nfields-- > 0)
+    {
+      TYPE_FIELD (type, nfields) = fip->fields->field;
+      switch (fip->fields->accessibility)
+	{
+	  case DW_ACCESS_private:
+	    SET_TYPE_FIELD_PRIVATE (type, nfields);
+	    break;
+
+	  case DW_ACCESS_protected:
+	    SET_TYPE_FIELD_PROTECTED (type, nfields);
+	    break;
+
+	  case DW_ACCESS_public:
+	    break;
+
+	  default:
+	    /* Unknown accessibility.  Complain and treat it as public.  */
+	    {
+	      complain (&dwarf2_unsupported_accessibility,
+			fip->fields->accessibility);
+	    }
+	    break;
+	}
+      if (nfields < fip->nbaseclasses)
+	{
+	  switch (fip->fields->virtuality)
+	    {
+	      case DW_VIRTUALITY_virtual:
+	      case DW_VIRTUALITY_pure_virtual:
+		SET_TYPE_FIELD_VIRTUAL (type, nfields);
+		break;
+	    }
+	}
+      fip->fields = fip->fields->next;
+    }
+}
+
+/* Skip to the end of a member function name in a mangled name.  */
+
+static char *
+skip_member_fn_name (physname)
+     char *physname;
+{
+  char *endname = physname;
+
+  /* Skip over leading underscores.  */
+  while (*endname == '_')
+    endname++;
+
+  /* Find two succesive underscores.  */
+  do
+    endname = strchr (endname, '_');
+  while (endname != NULL && *++endname != '_');
+
+  if (endname == NULL)
+    {
+      complain (&dwarf2_bad_member_name_complaint, physname);
+      endname = physname;
+    }
+  else
+    {
+      /* Take care of trailing underscores.  */
+      if (endname[1] != '_')
+        endname--;
+    }
+  return endname;
+}
+
+/* Add a member function to the proper fieldlist.  */
+
+static void
+dwarf2_add_member_fn (fip, die, type, objfile)
+     struct field_info *fip;
+     struct die_info *die;
+     struct type *type;
+     struct objfile *objfile;
+{
+  struct attribute *attr;
+  struct fnfieldlist *flp;
+  int i;
+  struct fn_field *fnp;
+  char *fieldname;
+  char *physname;
+  struct nextfnfield *new_fnfield;
+
+  /* Extract member function name from mangled name.  */
+  physname = dwarf2_linkage_name (die);
+  if (physname == NULL)
+    return;
+  if ((physname[0] == '_' && physname[1] == '_'
+        && strchr ("0123456789Qt", physname[2]))
+      || DESTRUCTOR_PREFIX_P (physname))
+    {
+      /* Constructor and destructor field names are set to the name
+	 of the class, but without template parameter lists.
+	 The name might be missing for anonymous aggregates.  */
+      if (TYPE_TAG_NAME (type))
+	{
+	  char *p = strchr (TYPE_TAG_NAME (type), '<');
+
+	  if (p == NULL)
+	    fieldname = TYPE_TAG_NAME (type);
+	  else
+	    fieldname = obsavestring (TYPE_TAG_NAME (type),
+				      p - TYPE_TAG_NAME (type),
+				      &objfile->type_obstack);
+	}
+      else
+	{
+	  char *anon_name = "";
+	  fieldname = obsavestring (anon_name, strlen (anon_name),
+				    &objfile->type_obstack);
+	}
+    }
+  else
+    {
+      char *endname = skip_member_fn_name (physname);
+
+      /* Ignore member function if we were unable not extract the member
+	 function name.  */
+      if (endname == physname)
+	return;
+      fieldname = obsavestring (physname, endname - physname,
+				&objfile->type_obstack);
+    }
+
+  /* Look up member function name in fieldlist.  */
+  for (i = 0; i < fip->nfnfields; i++)
+    {
+      if (STREQ (fip->fnfieldlists[i].name, fieldname))
+	break;
+    }
+
+  /* Create new list element if necessary.  */
+  if (i < fip->nfnfields)
+    flp = &fip->fnfieldlists[i];
+  else
+    {
+      if ((fip->nfnfields % DW_FIELD_ALLOC_CHUNK) == 0)
+	{
+	  fip->fnfieldlists = (struct fnfieldlist *)
+	    xrealloc (fip->fnfieldlists,
+		      (fip->nfnfields + DW_FIELD_ALLOC_CHUNK)
+		        * sizeof (struct fnfieldlist));
+	  if (fip->nfnfields == 0)
+	    make_cleanup ((make_cleanup_func) free_current_contents, 
+                          &fip->fnfieldlists);
+	}
+      flp = &fip->fnfieldlists[fip->nfnfields];
+      flp->name = fieldname;
+      flp->length = 0;
+      flp->head = NULL;
+      fip->nfnfields++;
+    }
+
+  /* Create a new member function field and chain it to the field list
+     entry. */
+  new_fnfield = (struct nextfnfield *) xmalloc (sizeof (struct nextfnfield));
+  make_cleanup (free, new_fnfield);
+  memset (new_fnfield, 0, sizeof (struct nextfnfield));
+  new_fnfield->next = flp->head;
+  flp->head = new_fnfield;
+  flp->length++;
+
+  /* Fill in the member function field info.  */
+  fnp = &new_fnfield->fnfield;
+  fnp->physname = obsavestring (physname, strlen (physname),
+				&objfile->type_obstack);
+  fnp->type = alloc_type (objfile);
+  if (die->type && TYPE_CODE (die->type) == TYPE_CODE_FUNC)
+    {
+      struct type *return_type = TYPE_TARGET_TYPE (die->type);
+      struct type **arg_types;
+      int nparams = TYPE_NFIELDS (die->type);
+      int iparams;
+
+      /* Copy argument types from the subroutine type.  */
+      arg_types = (struct type **)
+	TYPE_ALLOC (fnp->type, (nparams + 1) * sizeof (struct type *));
+      for (iparams = 0; iparams < nparams; iparams++)
+	arg_types[iparams] = TYPE_FIELD_TYPE (die->type, iparams);
+
+      /* Set last entry in argument type vector.  */
+      if (TYPE_FLAGS (die->type) & TYPE_FLAG_VARARGS)
+	arg_types[nparams] = NULL;
+      else
+	arg_types[nparams] = dwarf2_fundamental_type (objfile, FT_VOID);
+
+      smash_to_method_type (fnp->type, type, return_type, arg_types);
+
+      /* Handle static member functions.
+	 Dwarf2 has no clean way to discern C++ static and non-static
+	 member functions. G++ helps GDB by marking the first
+	 parameter for non-static member functions (which is the
+	 this pointer) as artificial. We obtain this information
+	 from read_subroutine_type via TYPE_FIELD_ARTIFICIAL.  */
+      if (nparams == 0 || TYPE_FIELD_ARTIFICIAL (die->type, 0) == 0)
+	fnp->voffset = VOFFSET_STATIC;
+    }
+  else
+    complain (&dwarf2_missing_member_fn_type_complaint, physname);
+
+  /* Get fcontext from DW_AT_containing_type if present.  */
+  if (dwarf_attr (die, DW_AT_containing_type) != NULL)
+    fnp->fcontext = die_containing_type (die, objfile);
+
+  /* dwarf2 doesn't have stubbed physical names, so the setting of is_const
+     and is_volatile is irrelevant, as it is needed by gdb_mangle_name only.  */
+
+  /* Get accessibility.  */
+  attr = dwarf_attr (die, DW_AT_accessibility);
+  if (attr)
+    {
+      switch (DW_UNSND (attr))
+	{
+	  case DW_ACCESS_private:
+	    fnp->is_private = 1;
+	    break;
+	  case DW_ACCESS_protected:
+	    fnp->is_protected = 1;
+	    break;
+	}
+    }
+
+  /* Get index in virtual function table if it is a virtual member function.  */
+  attr = dwarf_attr (die, DW_AT_vtable_elem_location);
+  if (attr)
+    fnp->voffset = decode_locdesc (DW_BLOCK (attr), objfile) + 2;
+}
+
+/* Create the vector of member function fields, and attach it to the type.  */
+
+static void
+dwarf2_attach_fn_fields_to_type (fip, type, objfile)
+     struct field_info *fip;
+     struct type *type;
+     struct objfile *objfile;
+{
+  struct fnfieldlist *flp;
+  int total_length = 0;
+  int i;
+
+  ALLOCATE_CPLUS_STRUCT_TYPE (type);
+  TYPE_FN_FIELDLISTS (type) = (struct fn_fieldlist *)
+    TYPE_ALLOC (type, sizeof (struct fn_fieldlist) * fip->nfnfields);
+
+  for (i = 0, flp = fip->fnfieldlists; i < fip->nfnfields; i++, flp++)
+    {
+      struct nextfnfield *nfp = flp->head;
+      struct fn_fieldlist *fn_flp = &TYPE_FN_FIELDLIST (type, i);
+      int k;
+
+      TYPE_FN_FIELDLIST_NAME (type, i) = flp->name;
+      TYPE_FN_FIELDLIST_LENGTH (type, i) = flp->length;
+      fn_flp->fn_fields = (struct fn_field *)
+	TYPE_ALLOC (type, sizeof (struct fn_field) * flp->length);
+      for (k = flp->length; (k--, nfp); nfp = nfp->next)
+        fn_flp->fn_fields[k] = nfp->fnfield;
+
+      total_length += flp->length;
+    }
+
+  TYPE_NFN_FIELDS (type) = fip->nfnfields;
+  TYPE_NFN_FIELDS_TOTAL (type) = total_length;
+}
+
+/* Called when we find the DIE that starts a structure or union scope
+   (definition) to process all dies that define the members of the
+   structure or union.
+
+   NOTE: we need to call struct_type regardless of whether or not the
+   DIE has an at_name attribute, since it might be an anonymous
+   structure or union.  This gets the type entered into our set of
+   user defined types.
+
+   However, if the structure is incomplete (an opaque struct/union)
+   then suppress creating a symbol table entry for it since gdb only
+   wants to find the one with the complete definition.  Note that if
+   it is complete, we just call new_symbol, which does it's own
+   checking about whether the struct/union is anonymous or not (and
+   suppresses creating a symbol table entry itself).  */
+
+static void
+read_structure_scope (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct attribute *attr;
+
+  type = alloc_type (objfile);
+
+  INIT_CPLUS_SPECIFIC (type);
+  attr = dwarf_attr (die, DW_AT_name);
+  if (attr && DW_STRING (attr))
+    {
+      TYPE_TAG_NAME (type) = obsavestring (DW_STRING (attr),
+					   strlen (DW_STRING (attr)),
+					   &objfile->type_obstack);
+    }
+
+  if (die->tag == DW_TAG_structure_type)
+    {
+      TYPE_CODE (type) = TYPE_CODE_STRUCT;
+    }
+  else if (die->tag == DW_TAG_union_type)
+    {
+      TYPE_CODE (type) = TYPE_CODE_UNION;
+    }
+  else
+    {
+      /* FIXME: TYPE_CODE_CLASS is currently defined to TYPE_CODE_STRUCT
+	 in gdbtypes.h.  */
+      TYPE_CODE (type) = TYPE_CODE_CLASS;
+    }
+
+  attr = dwarf_attr (die, DW_AT_byte_size);
+  if (attr)
+    {
+      TYPE_LENGTH (type) = DW_UNSND (attr);
+    }
+  else
+    {
+      TYPE_LENGTH (type) = 0;
+    }
+
+  /* We need to add the type field to the die immediately so we don't
+     infinitely recurse when dealing with pointers to the structure
+     type within the structure itself. */
+  die->type = type;
+
+  if (die->has_children)
+    {
+      struct field_info fi;
+      struct die_info *child_die;
+      struct cleanup *back_to = make_cleanup (null_cleanup, NULL);
+
+      memset (&fi, 0, sizeof (struct field_info));
+
+      child_die = die->next;
+
+      while (child_die && child_die->tag)
+	{
+	  if (child_die->tag == DW_TAG_member)
+	    {
+	      dwarf2_add_field (&fi, child_die, objfile);
+	    }
+	  else if (child_die->tag == DW_TAG_variable)
+	    {
+	      /* C++ static member.  */
+	      dwarf2_add_field (&fi, child_die, objfile);
+	    }
+	  else if (child_die->tag == DW_TAG_subprogram)
+	    {
+	      /* C++ member function. */
+	      process_die (child_die, objfile);
+	      dwarf2_add_member_fn (&fi, child_die, type, objfile);
+	    }
+	  else if (child_die->tag == DW_TAG_inheritance)
+	    {
+	      /* C++ base class field.  */
+	      dwarf2_add_field (&fi, child_die, objfile);
+	    }
+	  else
+	    {
+	      process_die (child_die, objfile);
+	    }
+	  child_die = sibling_die (child_die);
+	}
+
+      /* Attach fields and member functions to the type.  */
+      if (fi.nfields)
+	dwarf2_attach_fields_to_type (&fi, type, objfile);
+      if (fi.nfnfields)
+	{
+	  dwarf2_attach_fn_fields_to_type (&fi, type, objfile);
+
+          /* Get the type which refers to the base class (possibly this
+	     class itself) which contains the vtable pointer for the current
+	     class from the DW_AT_containing_type attribute.  */
+
+	  if (dwarf_attr (die, DW_AT_containing_type) != NULL)
+	    {
+	      struct type *t = die_containing_type (die, objfile);
+
+	      TYPE_VPTR_BASETYPE (type) = t;
+	      if (type == t)
+		{
+		  static const char vptr_name[] = { '_','v','p','t','r','\0' };
+		  int i;
+
+		  /* Our own class provides vtbl ptr.  */
+		  for (i = TYPE_NFIELDS (t) - 1;
+		       i >= TYPE_N_BASECLASSES (t);
+		       --i)
+		    {
+		      char *fieldname = TYPE_FIELD_NAME (t, i);
+
+		      if (STREQN (fieldname, vptr_name, strlen (vptr_name) - 1)
+			  && is_cplus_marker (fieldname[strlen (vptr_name)]))
+			{
+			  TYPE_VPTR_FIELDNO (type) = i;
+			  break;
+			}
+		    }
+
+		  /* Complain if virtual function table field not found.  */
+		  if (i < TYPE_N_BASECLASSES (t))
+		    complain (&dwarf2_vtbl_not_found_complaint,
+			      TYPE_TAG_NAME (type) ? TYPE_TAG_NAME (type) : "");
+		}
+	      else
+		{
+		  TYPE_VPTR_FIELDNO (type) = TYPE_VPTR_FIELDNO (t);
+		}
+	    }
+	}
+
+      new_symbol (die, type, objfile);
+
+      do_cleanups (back_to);
+    }
+  else
+    {
+      /* No children, must be stub. */
+      TYPE_FLAGS (type) |= TYPE_FLAG_STUB;
+    }
+
+  die->type = type;
+}
+
+/* Given a pointer to a die which begins an enumeration, process all
+   the dies that define the members of the enumeration.
+
+   This will be much nicer in draft 6 of the DWARF spec when our
+   members will be dies instead squished into the DW_AT_element_list
+   attribute.
+
+   NOTE: We reverse the order of the element list.  */
+
+static void
+read_enumeration (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct die_info *child_die;
+  struct type *type;
+  struct field *fields;
+  struct attribute *attr;
+  struct symbol *sym;
+  int num_fields;
+  int unsigned_enum = 1;
+
+  type = alloc_type (objfile);
+
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  attr = dwarf_attr (die, DW_AT_name);
+  if (attr && DW_STRING (attr))
+    {
+      TYPE_TAG_NAME (type) = obsavestring (DW_STRING (attr),
+					   strlen (DW_STRING (attr)),
+					   &objfile->type_obstack);
+    }
+
+  attr = dwarf_attr (die, DW_AT_byte_size);
+  if (attr)
+    {
+      TYPE_LENGTH (type) = DW_UNSND (attr);
+    }
+  else
+    {
+      TYPE_LENGTH (type) = 0;
+    }
+
+  num_fields = 0;
+  fields = NULL;
+  if (die->has_children)
+    {
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  if (child_die->tag != DW_TAG_enumerator)
+	    {
+	      process_die (child_die, objfile);
+	    }
+	  else
+	    {
+	      attr = dwarf_attr (child_die, DW_AT_name);
+	      if (attr)
+		{
+		  sym = new_symbol (child_die, type, objfile);
+		  if (SYMBOL_VALUE (sym) < 0)
+		    unsigned_enum = 0;
+
+		  if ((num_fields % DW_FIELD_ALLOC_CHUNK) == 0)
+		    {
+		      fields = (struct field *)
+			xrealloc (fields,
+				  (num_fields + DW_FIELD_ALLOC_CHUNK)
+				    * sizeof (struct field));
+		    }
+
+		  FIELD_NAME (fields[num_fields]) = SYMBOL_NAME (sym);
+		  FIELD_TYPE (fields[num_fields]) = NULL;
+		  FIELD_BITPOS (fields[num_fields]) = SYMBOL_VALUE (sym);
+		  FIELD_BITSIZE (fields[num_fields]) = 0;
+
+		  num_fields++;
+		}
+	    }
+
+	  child_die = sibling_die (child_die);
+	}
+
+      if (num_fields)
+	{
+	  TYPE_NFIELDS (type) = num_fields;
+	  TYPE_FIELDS (type) = (struct field *)
+	    TYPE_ALLOC (type, sizeof (struct field) * num_fields);
+	  memcpy (TYPE_FIELDS (type), fields,
+		  sizeof (struct field) * num_fields);
+	  free (fields);
+	}
+      if (unsigned_enum)
+	TYPE_FLAGS (type) |= TYPE_FLAG_UNSIGNED;
+    }
+  die->type = type;
+  new_symbol (die, type, objfile);
+}
+
+/* Extract all information from a DW_TAG_array_type DIE and put it in
+   the DIE's type field.  For now, this only handles one dimensional
+   arrays.  */
+
+static void
+read_array_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct die_info *child_die;
+  struct type *type = NULL;
+  struct type *element_type, *range_type, *index_type;
+  struct type **range_types = NULL;
+  struct attribute *attr;
+  int ndim = 0;
+  struct cleanup *back_to;
+
+  /* Return if we've already decoded this type. */
+  if (die->type)
+    {
+      return;
+    }
+
+  element_type = die_type (die, objfile);
+
+  /* Irix 6.2 native cc creates array types without children for
+     arrays with unspecified length.  */
+  if (die->has_children == 0)
+    {
+      index_type = dwarf2_fundamental_type (objfile, FT_INTEGER);
+      range_type = create_range_type (NULL, index_type, 0, -1);
+      die->type = create_array_type (NULL, element_type, range_type);
+      return;
+    }
+
+  back_to = make_cleanup (null_cleanup, NULL);
+  child_die = die->next;
+  while (child_die && child_die->tag)
+    {
+      if (child_die->tag == DW_TAG_subrange_type)
+	{
+	  unsigned int low, high;
+
+	  /* Default bounds to an array with unspecified length.  */
+	  low = 0;
+	  high = -1;
+	  if (cu_language == language_fortran)
+	    {
+	      /* FORTRAN implies a lower bound of 1, if not given.  */
+	      low = 1;
+	    }
+
+	  index_type = die_type (child_die, objfile);
+	  attr = dwarf_attr (child_die, DW_AT_lower_bound);
+	  if (attr)
+	    {
+	      if (attr->form == DW_FORM_sdata)
+		{
+		  low = DW_SND (attr);
+		}
+	      else if (attr->form == DW_FORM_udata
+	               || attr->form == DW_FORM_data1
+	               || attr->form == DW_FORM_data2
+	               || attr->form == DW_FORM_data4)
+		{
+		  low = DW_UNSND (attr);
+		}
+	      else
+		{
+		  complain (&dwarf2_non_const_array_bound_ignored,
+			    dwarf_form_name (attr->form));
+#ifdef FORTRAN_HACK
+		  die->type = lookup_pointer_type (element_type);
+		  return;
+#else
+		  low = 0;
+#endif
+		}
+	    }
+	  attr = dwarf_attr (child_die, DW_AT_upper_bound);
+	  if (attr)
+	    {
+	      if (attr->form == DW_FORM_sdata)
+		{
+		  high = DW_SND (attr);
+		}
+	      else if (attr->form == DW_FORM_udata
+	               || attr->form == DW_FORM_data1
+	               || attr->form == DW_FORM_data2
+	               || attr->form == DW_FORM_data4)
+		{
+		  high = DW_UNSND (attr);
+		}
+	      else if (attr->form == DW_FORM_block1)
+		{
+		  /* GCC encodes arrays with unspecified or dynamic length
+		     with a DW_FORM_block1 attribute.
+		     FIXME: GDB does not yet know how to handle dynamic
+		     arrays properly, treat them as arrays with unspecified
+		     length for now.  */
+		  high = -1;
+		}
+	      else
+		{
+		  complain (&dwarf2_non_const_array_bound_ignored,
+			    dwarf_form_name (attr->form));
+#ifdef FORTRAN_HACK
+		  die->type = lookup_pointer_type (element_type);
+		  return;
+#else
+		  high = 1;
+#endif
+		}
+	    }
+
+	  /* Create a range type and save it for array type creation.  */
+	  if ((ndim % DW_FIELD_ALLOC_CHUNK) == 0)
+	    {
+	      range_types = (struct type **)
+		xrealloc (range_types, (ndim + DW_FIELD_ALLOC_CHUNK)
+				         * sizeof (struct type *));
+	      if (ndim == 0)
+		make_cleanup ((make_cleanup_func) free_current_contents, 
+                              &range_types);
+	    }
+	  range_types[ndim++] = create_range_type (NULL, index_type, low, high);
+	}
+      child_die = sibling_die (child_die);
+    }
+
+  /* Dwarf2 dimensions are output from left to right, create the
+     necessary array types in backwards order.  */
+  type = element_type;
+  while (ndim-- > 0)
+    type = create_array_type (NULL, type, range_types[ndim]);
+
+  do_cleanups (back_to);
+
+  /* Install the type in the die. */
+  die->type = type;
+}
+
+/* First cut: install each common block member as a global variable.  */
+
+static void
+read_common_block (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct die_info *child_die;
+  struct attribute *attr;
+  struct symbol *sym;
+  CORE_ADDR base = (CORE_ADDR) 0;
+
+  attr = dwarf_attr (die, DW_AT_location);
+  if (attr)
+    {
+      base = decode_locdesc (DW_BLOCK (attr), objfile);
+    }
+  if (die->has_children)
+    {
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  sym = new_symbol (child_die, NULL, objfile);
+	  attr = dwarf_attr (child_die, DW_AT_data_member_location);
+	  if (attr)
+	    {
+	      SYMBOL_VALUE_ADDRESS (sym) =
+		base + decode_locdesc (DW_BLOCK (attr), objfile);
+	      add_symbol_to_list (sym, &global_symbols);
+	    }
+	  child_die = sibling_die (child_die);
+	}
+    }
+}
+
+/* Extract all information from a DW_TAG_pointer_type DIE and add to
+   the user defined type vector.  */
+
+static void
+read_tag_pointer_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct attribute *attr;
+
+  if (die->type)
+    {
+      return;
+    }
+
+  type = lookup_pointer_type (die_type (die, objfile));
+  attr = dwarf_attr (die, DW_AT_byte_size);
+  if (attr)
+    {
+      TYPE_LENGTH (type) = DW_UNSND (attr);
+    }
+  else
+    {
+      TYPE_LENGTH (type) = address_size;
+    }
+  die->type = type;
+}
+
+/* Extract all information from a DW_TAG_ptr_to_member_type DIE and add to
+   the user defined type vector.  */
+
+static void
+read_tag_ptr_to_member_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct type *to_type;
+  struct type *domain;
+
+  if (die->type)
+    {
+      return;
+    }
+
+  type = alloc_type (objfile);
+  to_type = die_type (die, objfile);
+  domain = die_containing_type (die, objfile);
+  smash_to_member_type (type, domain, to_type);
+
+  die->type = type;
+}
+
+/* Extract all information from a DW_TAG_reference_type DIE and add to
+   the user defined type vector.  */
+
+static void
+read_tag_reference_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct attribute *attr;
+
+  if (die->type)
+    {
+      return;
+    }
+
+  type = lookup_reference_type (die_type (die, objfile));
+  attr = dwarf_attr (die, DW_AT_byte_size);
+  if (attr)
+    {
+      TYPE_LENGTH (type) = DW_UNSND (attr);
+    }
+  else
+    {
+      TYPE_LENGTH (type) = address_size;
+    }
+  die->type = type;
+}
+
+static void
+read_tag_const_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  if (die->type)
+    {
+      return;
+    }
+
+  complain (&dwarf2_const_ignored);
+  die->type = die_type (die, objfile);
+}
+
+static void
+read_tag_volatile_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  if (die->type)
+    {
+      return;
+    }
+
+  complain (&dwarf2_volatile_ignored);
+  die->type = die_type (die, objfile);
+}
+
+/* Extract all information from a DW_TAG_string_type DIE and add to
+   the user defined type vector.  It isn't really a user defined type,
+   but it behaves like one, with other DIE's using an AT_user_def_type
+   attribute to reference it.  */
+
+static void
+read_tag_string_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type, *range_type, *index_type, *char_type;
+  struct attribute *attr;
+  unsigned int length;
+
+  if (die->type)
+    {
+      return;
+    }
+
+  attr = dwarf_attr (die, DW_AT_string_length);
+  if (attr)
+    {
+      length = DW_UNSND (attr);
+    }
+  else
+    {
+      length = 1;
+    }
+  index_type = dwarf2_fundamental_type (objfile, FT_INTEGER);
+  range_type = create_range_type (NULL, index_type, 1, length);
+  char_type = dwarf2_fundamental_type (objfile, FT_CHAR);
+  type = create_string_type (char_type, range_type);
+  die->type = type;
+}
+
+/* Handle DIES due to C code like:
+
+   struct foo
+     {
+       int (*funcp)(int a, long l);
+       int b;
+     };
+
+   ('funcp' generates a DW_TAG_subroutine_type DIE)
+*/
+
+static void
+read_subroutine_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;		/* Type that this function returns */
+  struct type *ftype;		/* Function that returns above type */
+  struct attribute *attr;
+
+  /* Decode the type that this subroutine returns */
+  if (die->type)
+    {
+      return;
+    }
+  type = die_type (die, objfile);
+  ftype = lookup_function_type (type);
+
+  /* All functions in C++ have prototypes.  */
+  attr = dwarf_attr (die, DW_AT_prototyped);
+  if ((attr && (DW_UNSND (attr) != 0))
+      || cu_language == language_cplus)
+    TYPE_FLAGS (ftype) |= TYPE_FLAG_PROTOTYPED;
+
+  if (die->has_children)
+    {
+      struct die_info *child_die;
+      int nparams = 0;
+      int iparams = 0;
+
+      /* Count the number of parameters.
+         FIXME: GDB currently ignores vararg functions, but knows about
+         vararg member functions.  */
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  if (child_die->tag == DW_TAG_formal_parameter)
+	    nparams++;
+	  else if (child_die->tag == DW_TAG_unspecified_parameters)
+	    TYPE_FLAGS (ftype) |= TYPE_FLAG_VARARGS;
+	  child_die = sibling_die (child_die);
+	}
+
+      /* Allocate storage for parameters and fill them in.  */
+      TYPE_NFIELDS (ftype) = nparams;
+      TYPE_FIELDS (ftype) = (struct field *)
+	TYPE_ALLOC (ftype, nparams * sizeof (struct field));
+
+      child_die = die->next;
+      while (child_die && child_die->tag)
+	{
+	  if (child_die->tag == DW_TAG_formal_parameter)
+	    {
+	      /* Dwarf2 has no clean way to discern C++ static and non-static
+		 member functions. G++ helps GDB by marking the first
+		 parameter for non-static member functions (which is the
+		 this pointer) as artificial. We pass this information
+		 to dwarf2_add_member_fn via TYPE_FIELD_ARTIFICIAL.  */
+	      attr = dwarf_attr (child_die, DW_AT_artificial);
+	      if (attr)
+		TYPE_FIELD_ARTIFICIAL (ftype, iparams) = DW_UNSND (attr);
+	      else
+		TYPE_FIELD_ARTIFICIAL (ftype, iparams) = 0;
+	      TYPE_FIELD_TYPE (ftype, iparams) = die_type (child_die, objfile);
+	      iparams++;
+	    }
+	  child_die = sibling_die (child_die);
+	}
+    }
+
+  die->type = ftype;
+}
+
+static void
+read_typedef (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+
+  if (!die->type)
+    {
+      struct attribute *attr;
+      struct type *xtype;
+
+      xtype = die_type (die, objfile);
+
+      type = alloc_type (objfile);
+      TYPE_CODE (type) = TYPE_CODE_TYPEDEF;
+      TYPE_FLAGS (type) |= TYPE_FLAG_TARGET_STUB;
+      TYPE_TARGET_TYPE (type) = xtype;
+      attr = dwarf_attr (die, DW_AT_name);
+      if (attr && DW_STRING (attr))
+	TYPE_NAME (type) = obsavestring (DW_STRING (attr),
+					 strlen (DW_STRING (attr)),
+					 &objfile->type_obstack);
+
+      die->type = type;
+    }
+}
+
+/* Find a representation of a given base type and install
+   it in the TYPE field of the die.  */
+
+static void
+read_base_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct attribute *attr;
+  int encoding = 0, size = 0;
+
+  /* If we've already decoded this die, this is a no-op. */
+  if (die->type)
+    {
+      return;
+    }
+
+  attr = dwarf_attr (die, DW_AT_encoding);
+  if (attr)
+    {
+      encoding = DW_UNSND (attr);
+    }
+  attr = dwarf_attr (die, DW_AT_byte_size);
+  if (attr)
+    {
+      size = DW_UNSND (attr);
+    }
+  attr = dwarf_attr (die, DW_AT_name);
+  if (attr && DW_STRING (attr))
+    {
+      enum type_code code = TYPE_CODE_INT;
+      int is_unsigned = 0;
+
+      switch (encoding)
+	{
+	case DW_ATE_address:
+	  /* Turn DW_ATE_address into a void * pointer.  */
+	  code = TYPE_CODE_PTR;
+	  is_unsigned = 1;
+	  break;
+	case DW_ATE_boolean:
+	  code = TYPE_CODE_BOOL;
+	  is_unsigned = 1;
+	  break;
+	case DW_ATE_complex_float:
+	  code = TYPE_CODE_COMPLEX;
+	  break;
+	case DW_ATE_float:
+	  code = TYPE_CODE_FLT;
+	  break;
+	case DW_ATE_signed:
+	case DW_ATE_signed_char:
+	  break;
+	case DW_ATE_unsigned:
+	case DW_ATE_unsigned_char:
+	  is_unsigned = 1;
+	  break;
+	default:
+	  complain (&dwarf2_unsupported_at_encoding,
+		    dwarf_type_encoding_name (encoding));
+	  break;
+	}
+      type = init_type (code, size, is_unsigned, DW_STRING (attr), objfile);
+      if (encoding == DW_ATE_address)
+	TYPE_TARGET_TYPE (type) = dwarf2_fundamental_type (objfile, FT_VOID);
+    }
+  else
+    {
+      type = dwarf_base_type (encoding, size, objfile);
+    }
+  die->type = type;
+}
+
+/* Read a whole compilation unit into a linked list of dies.  */
+
+struct die_info *
+read_comp_unit (info_ptr, abfd)
+    char *info_ptr;
+    bfd *abfd;
+{
+  struct die_info *first_die, *last_die, *die;
+  char *cur_ptr;
+  int nesting_level;
+
+  /* Reset die reference table, we are building a new one now. */
+  dwarf2_empty_die_ref_table ();
+
+  cur_ptr = info_ptr;
+  nesting_level = 0;
+  first_die = last_die = NULL;
+  do
+    {
+      cur_ptr = read_full_die (&die, abfd, cur_ptr);
+      if (die->has_children)
+	{
+	  nesting_level++;
+	}
+      if (die->tag == 0)
+	{
+	  nesting_level--;
+	}
+
+      die->next = NULL;
+
+      /* Enter die in reference hash table */
+      store_in_ref_table (die->offset, die);
+
+      if (!first_die)
+	{
+	  first_die = last_die = die;
+	}
+      else
+	{
+	  last_die->next = die;
+	  last_die = die;
+	}
+    }
+  while (nesting_level > 0);
+  return first_die;
+}
+
+/* Free a linked list of dies.  */
+
+static void
+free_die_list (dies)
+     struct die_info *dies;
+{
+  struct die_info *die, *next;
+
+  die = dies;
+  while (die)
+    {
+      next = die->next;
+      free (die->attrs);
+      free (die);
+      die = next;
+    }
+}
+
+/* Read the contents of the section at OFFSET and of size SIZE from the
+   object file specified by OBJFILE into the psymbol_obstack and return it.  */
+
+static char *
+dwarf2_read_section (objfile, offset, size)
+     struct objfile *objfile;
+     file_ptr offset;
+     unsigned int size;
+{
+  bfd *abfd = objfile->obfd;
+  char *buf;
+
+  if (size == 0)
+    return NULL;
+
+  buf = (char *) obstack_alloc (&objfile->psymbol_obstack, size);
+  if ((bfd_seek (abfd, offset, SEEK_SET) != 0) ||
+      (bfd_read (buf, size, 1, abfd) != size))
+    {
+      buf = NULL;
+      error ("Dwarf Error: Can't read DWARF data from '%s'",
+        bfd_get_filename (abfd));
+    }
+  return buf;
+}
+
+/* In DWARF version 2, the description of the debugging information is
+   stored in a separate .debug_abbrev section.  Before we read any
+   dies from a section we read in all abbreviations and install them
+   in a hash table.  */
+
+static void
+dwarf2_read_abbrevs (abfd, offset)
+     bfd * abfd;
+     unsigned int offset;
+{
+  char *abbrev_ptr;
+  struct abbrev_info *cur_abbrev;
+  unsigned int abbrev_number, bytes_read, abbrev_name;
+  unsigned int abbrev_form, hash_number;
+
+  /* empty the table */
+  dwarf2_empty_abbrev_table (NULL);
+
+  abbrev_ptr = dwarf_abbrev_buffer + offset;
+  abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+  abbrev_ptr += bytes_read;
+
+  /* loop until we reach an abbrev number of 0 */
+  while (abbrev_number)
+    {
+      cur_abbrev = dwarf_alloc_abbrev ();
+
+      /* read in abbrev header */
+      cur_abbrev->number = abbrev_number;
+      cur_abbrev->tag = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+      abbrev_ptr += bytes_read;
+      cur_abbrev->has_children = read_1_byte (abfd, abbrev_ptr);
+      abbrev_ptr += 1;
+
+      /* now read in declarations */
+      abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+      abbrev_ptr += bytes_read;
+      abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+      abbrev_ptr += bytes_read;
+      while (abbrev_name)
+	{
+	  if ((cur_abbrev->num_attrs % ATTR_ALLOC_CHUNK) == 0)
+	    {
+	      cur_abbrev->attrs = (struct attr_abbrev *)
+		xrealloc (cur_abbrev->attrs,
+			  (cur_abbrev->num_attrs + ATTR_ALLOC_CHUNK)
+			    * sizeof (struct attr_abbrev));
+	    }
+	  cur_abbrev->attrs[cur_abbrev->num_attrs].name = abbrev_name;
+	  cur_abbrev->attrs[cur_abbrev->num_attrs++].form = abbrev_form;
+	  abbrev_name = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+	  abbrev_ptr += bytes_read;
+	  abbrev_form = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+	  abbrev_ptr += bytes_read;
+	}
+
+      hash_number = abbrev_number % ABBREV_HASH_SIZE;
+      cur_abbrev->next = dwarf2_abbrevs[hash_number];
+      dwarf2_abbrevs[hash_number] = cur_abbrev;
+
+      /* Get next abbreviation.
+         Under Irix6 the abbreviations for a compilation unit are not
+	 always properly terminated with an abbrev number of 0.
+	 Exit loop if we encounter an abbreviation which we have
+	 already read (which means we are about to read the abbreviations
+	 for the next compile unit) or if the end of the abbreviation
+	 table is reached.  */
+      if ((unsigned int) (abbrev_ptr - dwarf_abbrev_buffer)
+	    >= dwarf_abbrev_size)
+	break;
+      abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
+      abbrev_ptr += bytes_read;
+      if (dwarf2_lookup_abbrev (abbrev_number) != NULL)
+	break;
+    }
+}
+
+/* Empty the abbrev table for a new compilation unit.  */
+
+/* ARGSUSED */
+static void
+dwarf2_empty_abbrev_table (ignore)
+     PTR ignore;
+{
+  int i;
+  struct abbrev_info *abbrev, *next;
+
+  for (i = 0; i < ABBREV_HASH_SIZE; ++i)
+    {
+      next = NULL;
+      abbrev = dwarf2_abbrevs[i];
+      while (abbrev)
+	{
+	  next = abbrev->next;
+	  free (abbrev->attrs);
+	  free (abbrev);
+	  abbrev = next;
+	}
+      dwarf2_abbrevs[i] = NULL;
+    }
+}
+
+/* Lookup an abbrev_info structure in the abbrev hash table.  */
+
+static struct abbrev_info *
+dwarf2_lookup_abbrev (number)
+     unsigned int number;
+{
+  unsigned int hash_number;
+  struct abbrev_info *abbrev;
+
+  hash_number = number % ABBREV_HASH_SIZE;
+  abbrev = dwarf2_abbrevs[hash_number];
+
+  while (abbrev)
+    {
+      if (abbrev->number == number)
+	return abbrev;
+      else
+	abbrev = abbrev->next;
+    }
+  return NULL;
+}
+
+/* Read a minimal amount of information into the minimal die structure.  */
+
+static char *
+read_partial_die (part_die, abfd, info_ptr, has_pc_info)
+     struct partial_die_info *part_die;
+     bfd * abfd;
+     char *info_ptr;
+     int *has_pc_info;
+{
+  unsigned int abbrev_number, bytes_read, i;
+  struct abbrev_info *abbrev;
+  struct attribute attr;
+  struct attribute spec_attr;
+  int found_spec_attr = 0;
+  int has_low_pc_attr  = 0;
+  int has_high_pc_attr = 0;
+
+  *part_die = zeroed_partial_die;
+  *has_pc_info = 0;
+  abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+  info_ptr += bytes_read;
+  if (!abbrev_number)
+    return info_ptr;
+
+  abbrev = dwarf2_lookup_abbrev (abbrev_number);
+  if (!abbrev)
+    {
+      error ("Dwarf Error: Could not find abbrev number %d.", abbrev_number);
+    }
+  part_die->offset = info_ptr - dwarf_info_buffer;
+  part_die->tag = abbrev->tag;
+  part_die->has_children = abbrev->has_children;
+  part_die->abbrev = abbrev_number;
+
+  for (i = 0; i < abbrev->num_attrs; ++i)
+    {
+      info_ptr = read_attribute (&attr, &abbrev->attrs[i], abfd, info_ptr);
+
+      /* Store the data if it is of an attribute we want to keep in a
+	 partial symbol table.  */
+      switch (attr.name)
+	{
+	case DW_AT_name:
+
+	  /* Prefer DW_AT_MIPS_linkage_name over DW_AT_name.  */
+	  if (part_die->name == NULL)
+	    part_die->name = DW_STRING (&attr);
+	  break;
+	case DW_AT_MIPS_linkage_name:
+	  part_die->name = DW_STRING (&attr);
+	  break;
+	case DW_AT_low_pc:
+	  has_low_pc_attr = 1;
+	  part_die->lowpc = DW_ADDR (&attr);
+	  break;
+	case DW_AT_high_pc:
+	  has_high_pc_attr = 1;
+	  part_die->highpc = DW_ADDR (&attr);
+	  break;
+	case DW_AT_location:
+	  part_die->locdesc = DW_BLOCK (&attr);
+	  break;
+	case DW_AT_language:
+	  part_die->language = DW_UNSND (&attr);
+	  break;
+	case DW_AT_external:
+	  part_die->is_external = DW_UNSND (&attr);
+	  break;
+	case DW_AT_declaration:
+	  part_die->is_declaration = DW_UNSND (&attr);
+	  break;
+	case DW_AT_type:
+	  part_die->has_type = 1;
+	  break;
+	case DW_AT_abstract_origin:
+	case DW_AT_specification:
+	  found_spec_attr = 1;
+	  spec_attr = attr;
+	  break;
+	case DW_AT_sibling:
+	  /* Ignore absolute siblings, they might point outside of
+	     the current compile unit.  */
+	  if (attr.form == DW_FORM_ref_addr)
+	    complain(&dwarf2_absolute_sibling_complaint);
+	  else
+	    part_die->sibling =
+	      dwarf_info_buffer + dwarf2_get_ref_die_offset (&attr);
+	  break;
+	default:
+	  break;
+	}
+    }
+
+  /* If we found a reference attribute and the die has no name, try
+     to find a name in the referred to die.  */
+
+  if (found_spec_attr && part_die->name == NULL)
+    {
+      struct partial_die_info spec_die;
+      char *spec_ptr;
+      int dummy;
+
+      spec_ptr = dwarf_info_buffer + dwarf2_get_ref_die_offset (&spec_attr);
+      read_partial_die (&spec_die, abfd, spec_ptr, &dummy);
+      if (spec_die.name)
+	{
+	  part_die->name = spec_die.name;
+
+	  /* Copy DW_AT_external attribute if it is set.  */
+	  if (spec_die.is_external)
+	    part_die->is_external = spec_die.is_external;
+	}
+    }
+
+  /* When using the GNU linker, .gnu.linkonce. sections are used to
+     eliminate duplicate copies of functions and vtables and such.
+     The linker will arbitrarily choose one and discard the others.
+     The AT_*_pc values for such functions refer to local labels in
+     these sections.  If the section from that file was discarded, the
+     labels are not in the output, so the relocs get a value of 0.
+     If this is a discarded function, mark the pc bounds as invalid,
+     so that GDB will ignore it.  */
+  if (has_low_pc_attr && has_high_pc_attr
+      && part_die->lowpc < part_die->highpc
+      && (part_die->lowpc != 0
+	  || (bfd_get_file_flags (abfd) & HAS_RELOC)))
+    *has_pc_info = 1;
+  return info_ptr;
+}
+
+/* Read the die from the .debug_info section buffer.  And set diep to
+   point to a newly allocated die with its information.  */
+
+static char *
+read_full_die (diep, abfd, info_ptr)
+     struct die_info **diep;
+     bfd *abfd;
+     char *info_ptr;
+{
+  unsigned int abbrev_number, bytes_read, i, offset;
+  struct abbrev_info *abbrev;
+  struct die_info *die;
+
+  offset = info_ptr - dwarf_info_buffer;
+  abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+  info_ptr += bytes_read;
+  if (!abbrev_number)
+    {
+      die = dwarf_alloc_die ();
+      die->tag = 0;
+      die->abbrev = abbrev_number;
+      die->type = NULL;
+      *diep = die;
+      return info_ptr;
+    }
+
+  abbrev = dwarf2_lookup_abbrev (abbrev_number);
+  if (!abbrev)
+    {
+      error ("Dwarf Error: could not find abbrev number %d.", abbrev_number);
+    }
+  die = dwarf_alloc_die ();
+  die->offset = offset;
+  die->tag = abbrev->tag;
+  die->has_children = abbrev->has_children;
+  die->abbrev = abbrev_number;
+  die->type = NULL;
+
+  die->num_attrs = abbrev->num_attrs;
+  die->attrs = (struct attribute *)
+    xmalloc (die->num_attrs * sizeof (struct attribute));
+
+  for (i = 0; i < abbrev->num_attrs; ++i)
+    {
+      info_ptr = read_attribute (&die->attrs[i], &abbrev->attrs[i],
+				 abfd, info_ptr);
+    }
+
+  *diep = die;
+  return info_ptr;
+}
+
+/* Read an attribute described by an abbreviated attribute.  */
+
+static char *
+read_attribute (attr, abbrev, abfd, info_ptr)
+     struct attribute *attr;
+     struct attr_abbrev *abbrev;
+     bfd *abfd;
+     char *info_ptr;
+{
+  unsigned int bytes_read;
+  struct dwarf_block *blk;
+
+  attr->name = abbrev->name;
+  attr->form = abbrev->form;
+  switch (abbrev->form)
+    {
+    case DW_FORM_addr:
+    case DW_FORM_ref_addr:
+      DW_ADDR (attr) = read_address (abfd, info_ptr);
+      info_ptr += address_size;
+      break;
+    case DW_FORM_block2:
+      blk = dwarf_alloc_block ();
+      blk->size = read_2_bytes (abfd, info_ptr);
+      info_ptr += 2;
+      blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+      info_ptr += blk->size;
+      DW_BLOCK (attr) = blk;
+      break;
+    case DW_FORM_block4:
+      blk = dwarf_alloc_block ();
+      blk->size = read_4_bytes (abfd, info_ptr);
+      info_ptr += 4;
+      blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+      info_ptr += blk->size;
+      DW_BLOCK (attr) = blk;
+      break;
+    case DW_FORM_data2:
+      DW_UNSND (attr) = read_2_bytes (abfd, info_ptr);
+      info_ptr += 2;
+      break;
+    case DW_FORM_data4:
+      DW_UNSND (attr) = read_4_bytes (abfd, info_ptr);
+      info_ptr += 4;
+      break;
+    case DW_FORM_data8:
+      DW_UNSND (attr) = read_8_bytes (abfd, info_ptr);
+      info_ptr += 8;
+      break;
+    case DW_FORM_string:
+      DW_STRING (attr) = read_string (abfd, info_ptr, &bytes_read);
+      info_ptr += bytes_read;
+      break;
+    case DW_FORM_block:
+      blk = dwarf_alloc_block ();
+      blk->size = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+      info_ptr += bytes_read;
+      blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+      info_ptr += blk->size;
+      DW_BLOCK (attr) = blk;
+      break;
+    case DW_FORM_block1:
+      blk = dwarf_alloc_block ();
+      blk->size = read_1_byte (abfd, info_ptr);
+      info_ptr += 1;
+      blk->data = read_n_bytes (abfd, info_ptr, blk->size);
+      info_ptr += blk->size;
+      DW_BLOCK (attr) = blk;
+      break;
+    case DW_FORM_data1:
+      DW_UNSND (attr) = read_1_byte (abfd, info_ptr);
+      info_ptr += 1;
+      break;
+    case DW_FORM_flag:
+      DW_UNSND (attr) = read_1_byte (abfd, info_ptr);
+      info_ptr += 1;
+      break;
+    case DW_FORM_sdata:
+      DW_SND (attr) = read_signed_leb128 (abfd, info_ptr, &bytes_read);
+      info_ptr += bytes_read;
+      break;
+    case DW_FORM_udata:
+      DW_UNSND (attr) = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+      info_ptr += bytes_read;
+      break;
+    case DW_FORM_ref1:
+      DW_UNSND (attr) = read_1_byte (abfd, info_ptr);
+      info_ptr += 1;
+      break;
+    case DW_FORM_ref2:
+      DW_UNSND (attr) = read_2_bytes (abfd, info_ptr);
+      info_ptr += 2;
+      break;
+    case DW_FORM_ref4:
+      DW_UNSND (attr) = read_4_bytes (abfd, info_ptr);
+      info_ptr += 4;
+      break;
+    case DW_FORM_ref_udata:
+      DW_UNSND (attr) = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
+      info_ptr += bytes_read;
+      break;
+    case DW_FORM_strp:
+    case DW_FORM_indirect:
+    default:
+      error ("Dwarf Error: Cannot handle %s in DWARF reader.",
+	     dwarf_form_name (abbrev->form));
+    }
+  return info_ptr;
+}
+
+/* read dwarf information from a buffer */
+
+static unsigned int
+read_1_byte (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_8 (abfd, (bfd_byte *) buf);
+}
+
+static int
+read_1_signed_byte (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_signed_8 (abfd, (bfd_byte *) buf);
+}
+
+static unsigned int
+read_2_bytes (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_16 (abfd, (bfd_byte *) buf);
+}
+
+static int
+read_2_signed_bytes (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_signed_16 (abfd, (bfd_byte *) buf);
+}
+
+static unsigned int
+read_4_bytes (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_32 (abfd, (bfd_byte *) buf);
+}
+
+static int
+read_4_signed_bytes (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_signed_32 (abfd, (bfd_byte *) buf);
+}
+
+static unsigned int
+read_8_bytes (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  return bfd_get_64 (abfd, (bfd_byte *) buf);
+}
+
+static CORE_ADDR
+read_address (abfd, buf)
+     bfd *abfd;
+     char *buf;
+{
+  CORE_ADDR retval = 0;
+
+  switch (address_size)
+    {
+    case 4:
+      retval = bfd_get_32 (abfd, (bfd_byte *) buf);
+      break;
+    case 8:
+      retval = bfd_get_64 (abfd, (bfd_byte *) buf);
+      break;
+    default:
+      /* *THE* alternative is 8, right? */
+      abort ();
+    }
+  /* If the address being read is larger than the address that is
+     applicable for the object file format then mask it down to the
+     correct size.  Take care to avoid unnecessary shift or shift
+     overflow */
+  if (address_size > address_significant_size
+      && address_significant_size < sizeof (CORE_ADDR))
+    {
+      CORE_ADDR mask = ((CORE_ADDR) 0) - 1;
+      retval &= ~(mask << (address_significant_size * 8));
+    }
+  return retval;
+}
+
+static char *
+read_n_bytes (abfd, buf, size)
+     bfd * abfd;
+     char *buf;
+     unsigned int size;
+{
+  /* If the size of a host char is 8 bits, we can return a pointer
+     to the buffer, otherwise we have to copy the data to a buffer
+     allocated on the temporary obstack.  */
+#if HOST_CHAR_BIT == 8
+  return buf;
+#else
+  char *ret;
+  unsigned int i;
+
+  ret = obstack_alloc (&dwarf2_tmp_obstack, size);
+  for (i = 0; i < size; ++i)
+    {
+      ret[i] = bfd_get_8 (abfd, (bfd_byte *) buf);
+      buf++;
+    }
+  return ret;
+#endif
+}
+
+static char *
+read_string (abfd, buf, bytes_read_ptr)
+     bfd *abfd;
+     char *buf;
+     unsigned int *bytes_read_ptr;
+{
+  /* If the size of a host char is 8 bits, we can return a pointer
+     to the string, otherwise we have to copy the string to a buffer
+     allocated on the temporary obstack.  */
+#if HOST_CHAR_BIT == 8
+  if (*buf == '\0')
+    {
+      *bytes_read_ptr = 1;
+      return NULL;
+    }
+  *bytes_read_ptr = strlen (buf) + 1;
+  return buf;
+#else
+  int byte;
+  unsigned int i = 0;
+
+  while ((byte = bfd_get_8 (abfd, (bfd_byte *) buf)) != 0)
+    {
+      obstack_1grow (&dwarf2_tmp_obstack, byte);
+      i++;
+      buf++;
+    }
+  if (i == 0)
+    {
+      *bytes_read_ptr = 1;
+      return NULL;
+    }
+  obstack_1grow (&dwarf2_tmp_obstack, '\0');
+  *bytes_read_ptr = i + 1;
+  return obstack_finish (&dwarf2_tmp_obstack);
+#endif
+}
+
+static unsigned int
+read_unsigned_leb128 (abfd, buf, bytes_read_ptr)
+     bfd *abfd;
+     char *buf;
+     unsigned int *bytes_read_ptr;
+{
+  unsigned int result, num_read;
+  int i, shift;
+  unsigned char byte;
+
+  result = 0;
+  shift = 0;
+  num_read = 0;
+  i = 0;
+  while (1)
+    {
+      byte = bfd_get_8 (abfd, (bfd_byte *) buf);
+      buf++;
+      num_read++;
+      result |= ((byte & 127) << shift);
+      if ((byte & 128) == 0)
+	{
+	  break;
+	}
+      shift += 7;
+    }
+  *bytes_read_ptr = num_read;
+  return result;
+}
+
+static int
+read_signed_leb128 (abfd, buf, bytes_read_ptr)
+     bfd *abfd;
+     char *buf;
+     unsigned int *bytes_read_ptr;
+{
+  int result;
+  int i, shift, size, num_read;
+  unsigned char byte;
+
+  result = 0;
+  shift = 0;
+  size = 32;
+  num_read = 0;
+  i = 0;
+  while (1)
+    {
+      byte = bfd_get_8 (abfd, (bfd_byte *) buf);
+      buf++;
+      num_read++;
+      result |= ((byte & 127) << shift);
+      shift += 7;
+      if ((byte & 128) == 0)
+	{
+	  break;
+	}
+    }
+  if ((shift < size) && (byte & 0x40))
+    {
+      result |= -(1 << shift);
+    }
+  *bytes_read_ptr = num_read;
+  return result;
+}
+
+static void
+set_cu_language (lang)
+     unsigned int lang;
+{
+  switch (lang)
+    {
+    case DW_LANG_C89:
+    case DW_LANG_C:
+      cu_language = language_c;
+      break;
+    case DW_LANG_C_plus_plus:
+      cu_language = language_cplus;
+      break;
+    case DW_LANG_Fortran77:
+    case DW_LANG_Fortran90:
+      cu_language = language_fortran;
+      break;
+    case DW_LANG_Mips_Assembler:
+      cu_language = language_asm;
+      break;
+    case DW_LANG_Ada83:
+    case DW_LANG_Cobol74:
+    case DW_LANG_Cobol85:
+    case DW_LANG_Pascal83:
+    case DW_LANG_Modula2:
+    default:
+      cu_language = language_unknown;
+      break;
+    }
+  cu_language_defn = language_def (cu_language);
+}
+
+/* Return the named attribute or NULL if not there.  */
+
+static struct attribute *
+dwarf_attr (die, name)
+     struct die_info *die;
+     unsigned int name;
+{
+  unsigned int i;
+  struct attribute *spec = NULL;
+
+  for (i = 0; i < die->num_attrs; ++i)
+    {
+      if (die->attrs[i].name == name)
+	{
+	  return &die->attrs[i];
+	}
+      if (die->attrs[i].name == DW_AT_specification
+	  || die->attrs[i].name == DW_AT_abstract_origin)
+	spec = &die->attrs[i];
+    }
+  if (spec)
+    {
+      struct die_info *ref_die =
+	follow_die_ref (dwarf2_get_ref_die_offset (spec));
+
+      if (ref_die)
+	return dwarf_attr (ref_die, name);
+    }
+    
+  return NULL;
+}
+
+/* Decode the line number information for the compilation unit whose
+   line number info is at OFFSET in the .debug_line section.
+   The compilation directory of the file is passed in COMP_DIR.  */
+
+struct filenames
+{
+  unsigned int num_files;
+  struct fileinfo
+  {
+    char *name;
+    unsigned int dir;
+    unsigned int time;
+    unsigned int size;
+  }
+  *files;
+};
+
+struct directories
+{
+  unsigned int num_dirs;
+  char **dirs;
+};
+
+static void
+dwarf_decode_lines (offset, comp_dir, abfd)
+     unsigned int offset;
+     char *comp_dir;
+     bfd *abfd;
+{
+  char *line_ptr;
+  char *line_end;
+  struct line_head lh;
+  struct cleanup *back_to;
+  unsigned int i, bytes_read;
+  char *cur_file, *cur_dir;
+  unsigned char op_code, extended_op, adj_opcode;
+
+#define FILE_ALLOC_CHUNK 5
+#define DIR_ALLOC_CHUNK 5
+
+  struct filenames files;
+  struct directories dirs;
+
+  if (dwarf_line_buffer == NULL)
+    {
+      complain (&dwarf2_missing_line_number_section);
+      return;
+    }
+
+  files.num_files = 0;
+  files.files = NULL;
+
+  dirs.num_dirs = 0;
+  dirs.dirs = NULL;
+
+  line_ptr = dwarf_line_buffer + offset;
+
+  /* read in the prologue */
+  lh.total_length = read_4_bytes (abfd, line_ptr);
+  line_ptr += 4;
+  line_end = line_ptr + lh.total_length;
+  lh.version = read_2_bytes (abfd, line_ptr);
+  line_ptr += 2;
+  lh.prologue_length = read_4_bytes (abfd, line_ptr);
+  line_ptr += 4;
+  lh.minimum_instruction_length = read_1_byte (abfd, line_ptr);
+  line_ptr += 1;
+  lh.default_is_stmt = read_1_byte (abfd, line_ptr);
+  line_ptr += 1;
+  lh.line_base = read_1_signed_byte (abfd, line_ptr);
+  line_ptr += 1;
+  lh.line_range = read_1_byte (abfd, line_ptr);
+  line_ptr += 1;
+  lh.opcode_base = read_1_byte (abfd, line_ptr);
+  line_ptr += 1;
+  lh.standard_opcode_lengths = (unsigned char *)
+    xmalloc (lh.opcode_base * sizeof (unsigned char));
+  back_to = make_cleanup ((make_cleanup_func) free_current_contents, 
+                          &lh.standard_opcode_lengths);
+
+  lh.standard_opcode_lengths[0] = 1;
+  for (i = 1; i < lh.opcode_base; ++i)
+    {
+      lh.standard_opcode_lengths[i] = read_1_byte (abfd, line_ptr);
+      line_ptr += 1;
+    }
+
+  /* Read directory table  */
+  while ((cur_dir = read_string (abfd, line_ptr, &bytes_read)) != NULL)
+    {
+      line_ptr += bytes_read;
+      if ((dirs.num_dirs % DIR_ALLOC_CHUNK) == 0)
+	{
+	  dirs.dirs = (char **)
+	    xrealloc (dirs.dirs,
+		      (dirs.num_dirs + DIR_ALLOC_CHUNK) * sizeof (char *));
+	  if (dirs.num_dirs == 0)
+	    make_cleanup ((make_cleanup_func) free_current_contents, &dirs.dirs);
+	}
+      dirs.dirs[dirs.num_dirs++] = cur_dir;
+    }
+  line_ptr += bytes_read;
+
+  /* Read file name table */
+  while ((cur_file = read_string (abfd, line_ptr, &bytes_read)) != NULL)
+    {
+      line_ptr += bytes_read;
+      if ((files.num_files % FILE_ALLOC_CHUNK) == 0)
+	{
+	  files.files = (struct fileinfo *)
+	    xrealloc (files.files,
+		      (files.num_files + FILE_ALLOC_CHUNK)
+			* sizeof (struct fileinfo));
+	  if (files.num_files == 0)
+	    make_cleanup ((make_cleanup_func) free_current_contents, 
+                          &files.files);
+	}
+      files.files[files.num_files].name = cur_file;
+      files.files[files.num_files].dir =
+	read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+      line_ptr += bytes_read;
+      files.files[files.num_files].time =
+	read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+      line_ptr += bytes_read;
+      files.files[files.num_files].size =
+	read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+      line_ptr += bytes_read;
+      files.num_files++;
+    }
+  line_ptr += bytes_read;
+
+  /* Read the statement sequences until there's nothing left.  */
+  while (line_ptr < line_end)
+    {
+      /* state machine registers  */
+      CORE_ADDR address = 0;
+      unsigned int file = 1;
+      unsigned int line = 1;
+      unsigned int column = 0;
+      int is_stmt = lh.default_is_stmt;
+      int basic_block = 0;
+      int end_sequence = 0;
+
+      /* Start a subfile for the current file of the state machine.  */
+      if (files.num_files >= file)
+	{
+	  /* The file and directory tables are 0 based, the references
+	     are 1 based.  */
+	  dwarf2_start_subfile (files.files[file - 1].name,
+				(files.files[file - 1].dir
+				 ? dirs.dirs[files.files[file - 1].dir - 1]
+				 : comp_dir));
+	}
+
+      /* Decode the table. */
+      while (! end_sequence)
+	{
+	  op_code = read_1_byte (abfd, line_ptr);
+	  line_ptr += 1;
+	  switch (op_code)
+	    {
+	    case DW_LNS_extended_op:
+	      line_ptr += 1;	/* ignore length */
+	      extended_op = read_1_byte (abfd, line_ptr);
+	      line_ptr += 1;
+	      switch (extended_op)
+		{
+		case DW_LNE_end_sequence:
+		  end_sequence = 1;
+		  record_line (current_subfile, line, address);
+		  break;
+		case DW_LNE_set_address:
+		  address = read_address (abfd, line_ptr) + baseaddr;
+		  line_ptr += address_size;
+		  break;
+		case DW_LNE_define_file:
+		  cur_file = read_string (abfd, line_ptr, &bytes_read);
+		  line_ptr += bytes_read;
+		  if ((files.num_files % FILE_ALLOC_CHUNK) == 0)
+		    {
+		      files.files = (struct fileinfo *)
+			xrealloc (files.files,
+				  (files.num_files + FILE_ALLOC_CHUNK)
+				    * sizeof (struct fileinfo));
+		      if (files.num_files == 0)
+			make_cleanup ((make_cleanup_func) free_current_contents, 
+                                      &files.files);
+		    }
+		  files.files[files.num_files].name = cur_file;
+		  files.files[files.num_files].dir =
+		    read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+		  line_ptr += bytes_read;
+		  files.files[files.num_files].time =
+		    read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+		  line_ptr += bytes_read;
+		  files.files[files.num_files].size =
+		    read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+		  line_ptr += bytes_read;
+		  files.num_files++;
+		  break;
+		default:
+		  complain (&dwarf2_mangled_line_number_section);
+		  goto done;
+		}
+	      break;
+	    case DW_LNS_copy:
+	      record_line (current_subfile, line, address);
+	      basic_block = 0;
+	      break;
+	    case DW_LNS_advance_pc:
+	      address += lh.minimum_instruction_length
+		* read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+	      line_ptr += bytes_read;
+	      break;
+	    case DW_LNS_advance_line:
+	      line += read_signed_leb128 (abfd, line_ptr, &bytes_read);
+	      line_ptr += bytes_read;
+	      break;
+	    case DW_LNS_set_file:
+	      /* The file and directory tables are 0 based, the references
+		 are 1 based.  */
+	      file = read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+	      line_ptr += bytes_read;
+	      dwarf2_start_subfile
+		(files.files[file - 1].name,
+		 (files.files[file - 1].dir
+		  ? dirs.dirs[files.files[file - 1].dir - 1]
+		  : comp_dir));
+	      break;
+	    case DW_LNS_set_column:
+	      column = read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+	      line_ptr += bytes_read;
+	      break;
+	    case DW_LNS_negate_stmt:
+	      is_stmt = (!is_stmt);
+	      break;
+	    case DW_LNS_set_basic_block:
+	      basic_block = 1;
+	      break;
+	    case DW_LNS_const_add_pc:
+	      address += (255 - lh.opcode_base) / lh.line_range;
+	      break;
+	    case DW_LNS_fixed_advance_pc:
+	      address += read_2_bytes (abfd, line_ptr);
+	      line_ptr += 2;
+	      break;
+	    default:		/* special operand */
+	      adj_opcode = op_code - lh.opcode_base;
+	      address += (adj_opcode / lh.line_range)
+		* lh.minimum_instruction_length;
+	      line += lh.line_base + (adj_opcode % lh.line_range);
+	      /* append row to matrix using current values */
+	      record_line (current_subfile, line, address);
+	      basic_block = 1;
+	    }
+	}
+    }
+done:
+  do_cleanups (back_to);
+}
+
+/* Start a subfile for DWARF.  FILENAME is the name of the file and
+   DIRNAME the name of the source directory which contains FILENAME
+   or NULL if not known.
+   This routine tries to keep line numbers from identical absolute and
+   relative file names in a common subfile.
+
+   Using the `list' example from the GDB testsuite, which resides in
+   /srcdir and compiling it with Irix6.2 cc in /compdir using a filename
+   of /srcdir/list0.c yields the following debugging information for list0.c:
+
+	DW_AT_name:		/srcdir/list0.c
+	DW_AT_comp_dir:		/compdir
+	files.files[0].name:	list0.h		
+	files.files[0].dir:	/srcdir
+	files.files[1].name:	list0.c		
+	files.files[1].dir:	/srcdir
+
+   The line number information for list0.c has to end up in a single
+   subfile, so that `break /srcdir/list0.c:1' works as expected.  */
+
+static void
+dwarf2_start_subfile (filename, dirname)
+     char *filename;
+     char *dirname;
+{
+  /* If the filename isn't absolute, try to match an existing subfile
+     with the full pathname.  */
+
+  if (*filename != '/' && dirname != NULL)
+    {
+      struct subfile *subfile;
+      char *fullname = concat (dirname, "/", filename, NULL);
+
+      for (subfile = subfiles; subfile; subfile = subfile->next)
+	{
+	  if (STREQ (subfile->name, fullname))
+	    {
+	      current_subfile = subfile;
+	      free (fullname);
+	      return;
+	    }
+	}
+      free (fullname);
+    }
+  start_subfile (filename, dirname);
+}
+
+/* Given a pointer to a DWARF information entry, figure out if we need
+   to make a symbol table entry for it, and if so, create a new entry
+   and return a pointer to it.
+   If TYPE is NULL, determine symbol type from the die, otherwise
+   used the passed type.
+  */
+
+static struct symbol *
+new_symbol (die, type, objfile)
+     struct die_info *die;
+     struct type *type;
+     struct objfile *objfile;
+{
+  struct symbol *sym = NULL;
+  char *name;
+  struct attribute *attr = NULL;
+  struct attribute *attr2 = NULL;
+  CORE_ADDR addr;
+
+  name = dwarf2_linkage_name (die);
+  if (name)
+    {
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      OBJSTAT (objfile, n_syms++);
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = obsavestring (name, strlen (name),
+					&objfile->symbol_obstack);
+
+      /* Default assumptions.
+	 Use the passed type or decode it from the die.  */
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      if (type != NULL)
+	SYMBOL_TYPE (sym) = type;
+      else
+	SYMBOL_TYPE (sym) = die_type (die, objfile);
+      attr = dwarf_attr (die, DW_AT_decl_line);
+      if (attr)
+	{
+	  SYMBOL_LINE (sym) = DW_UNSND (attr);
+	}
+
+      /* If this symbol is from a C++ compilation, then attempt to
+         cache the demangled form for future reference.  This is a
+         typical time versus space tradeoff, that was decided in favor
+         of time because it sped up C++ symbol lookups by a factor of
+         about 20. */
+
+      SYMBOL_LANGUAGE (sym) = cu_language;
+      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+      switch (die->tag)
+	{
+	case DW_TAG_label:
+	  attr = dwarf_attr (die, DW_AT_low_pc);
+	  if (attr)
+	    {
+	      SYMBOL_VALUE_ADDRESS (sym) = DW_ADDR (attr) + baseaddr;
+	    }
+	  SYMBOL_CLASS (sym) = LOC_LABEL;
+	  break;
+	case DW_TAG_subprogram:
+	  /* SYMBOL_BLOCK_VALUE (sym) will be filled in later by
+	     finish_block.  */
+	  SYMBOL_CLASS (sym) = LOC_BLOCK;
+	  attr2 = dwarf_attr (die, DW_AT_external);
+	  if (attr2 && (DW_UNSND (attr2) != 0))
+	    {
+	      add_symbol_to_list (sym, &global_symbols);
+	    }
+	  else
+	    {
+	      add_symbol_to_list (sym, list_in_scope);
+	    }
+	  break;
+	case DW_TAG_variable:
+	  /* Compilation with minimal debug info may result in variables
+	     with missing type entries. Change the misleading `void' type
+	     to something sensible.  */
+	  if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_VOID)
+	    SYMBOL_TYPE (sym) = init_type (TYPE_CODE_INT,
+					   TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+					   "<variable, no debug info>",
+					   objfile);
+	  attr = dwarf_attr (die, DW_AT_const_value);
+	  if (attr)
+	    {
+	      dwarf2_const_value (attr, sym, objfile);
+	      attr2 = dwarf_attr (die, DW_AT_external);
+	      if (attr2 && (DW_UNSND (attr2) != 0))
+		add_symbol_to_list (sym, &global_symbols);
+	      else
+		add_symbol_to_list (sym, list_in_scope);
+	      break;
+	    }
+	  attr = dwarf_attr (die, DW_AT_location);
+	  if (attr)
+	    {
+	      attr2 = dwarf_attr (die, DW_AT_external);
+	      if (attr2 && (DW_UNSND (attr2) != 0))
+		{
+		  SYMBOL_VALUE_ADDRESS (sym) =
+		    decode_locdesc (DW_BLOCK (attr), objfile);
+		  add_symbol_to_list (sym, &global_symbols);
+
+	 	  /* In shared libraries the address of the variable
+		     in the location descriptor might still be relocatable,
+		     so its value could be zero.
+		     Enter the symbol as a LOC_UNRESOLVED symbol, if its
+		     value is zero, the address of the variable will then
+		     be determined from the minimal symbol table whenever
+		     the variable is referenced.  */
+		  if (SYMBOL_VALUE_ADDRESS (sym))
+		    {
+		      SYMBOL_VALUE_ADDRESS (sym) += baseaddr;
+		      SYMBOL_CLASS (sym) = LOC_STATIC;
+		    }
+		  else
+		    SYMBOL_CLASS (sym) = LOC_UNRESOLVED;
+		}
+	      else
+		{
+		  SYMBOL_VALUE (sym) = addr =
+		    decode_locdesc (DW_BLOCK (attr), objfile);
+		  add_symbol_to_list (sym, list_in_scope);
+		  if (optimized_out)
+		    {
+		      SYMBOL_CLASS (sym) = LOC_OPTIMIZED_OUT;
+		    }
+		  else if (isreg)
+		    {
+		      SYMBOL_CLASS (sym) = LOC_REGISTER;
+		    }
+		  else if (offreg)
+		    {
+		      SYMBOL_CLASS (sym) = LOC_BASEREG;
+		      SYMBOL_BASEREG (sym) = basereg;
+		    }
+		  else if (islocal)
+		    {
+		      SYMBOL_CLASS (sym) = LOC_LOCAL;
+		    }
+		  else
+		    {
+		      SYMBOL_CLASS (sym) = LOC_STATIC;
+		      SYMBOL_VALUE_ADDRESS (sym) = addr + baseaddr;
+		    }
+		}
+	    }
+	  else
+	    {
+	      /* We do not know the address of this symbol.
+		 If it is an external symbol and we have type information
+		 for it, enter the symbol as a LOC_UNRESOLVED symbol.
+		 The address of the variable will then be determined from
+		 the minimal symbol table whenever the variable is
+		 referenced.  */
+	      attr2 = dwarf_attr (die, DW_AT_external);
+	      if (attr2 && (DW_UNSND (attr2) != 0)
+		  && dwarf_attr (die, DW_AT_type) != NULL)
+		{
+		  SYMBOL_CLASS (sym) = LOC_UNRESOLVED;
+		  add_symbol_to_list (sym, &global_symbols);
+		}
+	    }
+	  break;
+	case DW_TAG_formal_parameter:
+	  attr = dwarf_attr (die, DW_AT_location);
+	  if (attr)
+	    {
+	      SYMBOL_VALUE (sym) = decode_locdesc (DW_BLOCK (attr), objfile);
+	      if (isreg)
+		{
+		  SYMBOL_CLASS (sym) = LOC_REGPARM;
+		}
+	      else if (offreg)
+		{
+		  SYMBOL_CLASS (sym) = LOC_BASEREG_ARG;
+		  SYMBOL_BASEREG (sym) = basereg;
+		}
+	      else
+		{
+		  SYMBOL_CLASS (sym) = LOC_ARG;
+		}
+	    }
+	  attr = dwarf_attr (die, DW_AT_const_value);
+	  if (attr)
+	    {
+	      dwarf2_const_value (attr, sym, objfile);
+	    }
+	  add_symbol_to_list (sym, list_in_scope);
+	  break;
+	case DW_TAG_unspecified_parameters:
+	  /* From varargs functions; gdb doesn't seem to have any
+	     interest in this information, so just ignore it for now.
+	     (FIXME?) */
+	  break;
+	case DW_TAG_class_type:
+	case DW_TAG_structure_type:
+	case DW_TAG_union_type:
+	case DW_TAG_enumeration_type:
+	  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	  SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+	  add_symbol_to_list (sym, list_in_scope);
+
+	  /* The semantics of C++ state that "struct foo { ... }" also
+	     defines a typedef for "foo". Synthesize a typedef symbol so
+	     that "ptype foo" works as expected.  */
+	  if (cu_language == language_cplus)
+	    {
+	      struct symbol *typedef_sym = (struct symbol *)
+		obstack_alloc (&objfile->symbol_obstack,
+			       sizeof (struct symbol));
+	      *typedef_sym = *sym;
+	      SYMBOL_NAMESPACE (typedef_sym) = VAR_NAMESPACE;
+	      if (TYPE_NAME (SYMBOL_TYPE (sym)) == 0)
+		TYPE_NAME (SYMBOL_TYPE (sym)) =
+		  obsavestring (SYMBOL_NAME (sym),
+				strlen (SYMBOL_NAME (sym)),
+				&objfile->type_obstack);
+	      add_symbol_to_list (typedef_sym, list_in_scope);
+	    }
+	  break;
+	case DW_TAG_typedef:
+	case DW_TAG_base_type:
+	  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	  add_symbol_to_list (sym, list_in_scope);
+	  break;
+	case DW_TAG_enumerator:
+	  attr = dwarf_attr (die, DW_AT_const_value);
+	  if (attr)
+	    {
+	      dwarf2_const_value (attr, sym, objfile);
+	    }
+	  add_symbol_to_list (sym, list_in_scope);
+	  break;
+	default:
+	  /* Not a tag we recognize.  Hopefully we aren't processing
+	     trash data, but since we must specifically ignore things
+	     we don't recognize, there is nothing else we should do at
+	     this point. */
+	  complain (&dwarf2_unsupported_tag, dwarf_tag_name (die->tag));
+	  break;
+	}
+    }
+  return (sym);
+}
+
+/* Copy constant value from an attribute to a symbol.  */
+
+static void
+dwarf2_const_value (attr, sym, objfile)
+     struct attribute *attr;
+     struct symbol *sym;
+     struct objfile *objfile;
+{
+  struct dwarf_block *blk;
+
+  switch (attr->form)
+    {
+    case DW_FORM_addr:
+      if (TYPE_LENGTH (SYMBOL_TYPE (sym)) != (unsigned int) address_size)
+	complain (&dwarf2_const_value_length_mismatch, SYMBOL_NAME (sym),
+		  address_size, TYPE_LENGTH (SYMBOL_TYPE (sym)));
+      SYMBOL_VALUE_BYTES (sym) = (char *)
+	obstack_alloc (&objfile->symbol_obstack, address_size);
+      store_address (SYMBOL_VALUE_BYTES (sym), address_size, DW_ADDR (attr));
+      SYMBOL_CLASS (sym) = LOC_CONST_BYTES;
+      break;
+    case DW_FORM_block1:
+    case DW_FORM_block2:
+    case DW_FORM_block4:
+    case DW_FORM_block:
+      blk = DW_BLOCK (attr);
+      if (TYPE_LENGTH (SYMBOL_TYPE (sym)) != blk->size)
+	complain (&dwarf2_const_value_length_mismatch, SYMBOL_NAME (sym),
+		  blk->size, TYPE_LENGTH (SYMBOL_TYPE (sym)));
+      SYMBOL_VALUE_BYTES (sym) = (char *)
+	obstack_alloc (&objfile->symbol_obstack, blk->size);
+      memcpy (SYMBOL_VALUE_BYTES (sym), blk->data, blk->size);
+      SYMBOL_CLASS (sym) = LOC_CONST_BYTES;
+      break;
+    case DW_FORM_data2:
+    case DW_FORM_data4:
+    case DW_FORM_data8:
+    case DW_FORM_data1:
+    case DW_FORM_sdata:
+    case DW_FORM_udata:
+      SYMBOL_VALUE (sym) = DW_UNSND (attr);
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      break;
+    default:
+      complain (&dwarf2_unsupported_const_value_attr,
+		dwarf_form_name (attr->form));
+      SYMBOL_VALUE (sym) = 0;
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      break;
+    }
+}
+
+/* Return the type of the die in question using its DW_AT_type attribute.  */
+
+static struct type *
+die_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct attribute *type_attr;
+  struct die_info *type_die;
+  unsigned int ref;
+
+  type_attr = dwarf_attr (die, DW_AT_type);
+  if (!type_attr)
+    {
+      /* A missing DW_AT_type represents a void type.  */
+      return dwarf2_fundamental_type (objfile, FT_VOID);
+    }
+  else
+    {
+      ref = dwarf2_get_ref_die_offset (type_attr);
+      type_die = follow_die_ref (ref);
+      if (!type_die)
+	{
+	  error ("Dwarf Error: Cannot find referent at offset %d.", ref);
+	  return NULL;
+	}
+    }
+  type = tag_type_to_type (type_die, objfile);
+  if (!type)
+    {
+      dump_die (type_die);
+      error ("Dwarf Error: Problem turning type die at offset into gdb type.");
+    }
+  return type;
+}
+
+/* Return the containing type of the die in question using its
+   DW_AT_containing_type attribute.  */
+
+static struct type *
+die_containing_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  struct type *type = NULL;
+  struct attribute *type_attr;
+  struct die_info *type_die = NULL;
+  unsigned int ref;
+
+  type_attr = dwarf_attr (die, DW_AT_containing_type);
+  if (type_attr)
+    {
+      ref = dwarf2_get_ref_die_offset (type_attr);
+      type_die = follow_die_ref (ref);
+      if (!type_die)
+	{
+	  error ("Dwarf Error: Cannot find referent at offset %d.", ref);
+	  return NULL;
+	}
+      type = tag_type_to_type (type_die, objfile);
+    }
+  if (!type)
+    {
+      if (type_die)
+	dump_die (type_die);
+      error ("Dwarf Error: Problem turning containing type into gdb type.");
+    }
+  return type;
+}
+
+#if 0
+static struct type *
+type_at_offset (offset, objfile)
+     unsigned int offset;
+     struct objfile *objfile;
+{
+  struct die_info *die;
+  struct type *type;
+
+  die = follow_die_ref (offset);
+  if (!die)
+    {
+      error ("Dwarf Error: Cannot find type referent at offset %d.", offset);
+      return NULL;
+    }
+  type = tag_type_to_type (die, objfile);
+  return type;
+}
+#endif
+
+static struct type *
+tag_type_to_type (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  if (die->type)
+    {
+      return die->type;
+    }
+  else
+    {
+      read_type_die (die, objfile);
+      if (!die->type)
+	{
+	  dump_die (die);
+	  error ("Dwarf Error: Cannot find type of die.");
+	}
+      return die->type;
+    }
+}
+
+static void
+read_type_die (die, objfile)
+     struct die_info *die;
+     struct objfile *objfile;
+{
+  switch (die->tag)
+    {
+    case DW_TAG_class_type:
+    case DW_TAG_structure_type:
+    case DW_TAG_union_type:
+      read_structure_scope (die, objfile);
+      break;
+    case DW_TAG_enumeration_type:
+      read_enumeration (die, objfile);
+      break;
+    case DW_TAG_subprogram:
+    case DW_TAG_subroutine_type:
+      read_subroutine_type (die, objfile);
+      break;
+    case DW_TAG_array_type:
+      read_array_type (die, objfile);
+      break;
+    case DW_TAG_pointer_type:
+      read_tag_pointer_type (die, objfile);
+      break;
+    case DW_TAG_ptr_to_member_type:
+      read_tag_ptr_to_member_type (die, objfile);
+      break;
+    case DW_TAG_reference_type:
+      read_tag_reference_type (die, objfile);
+      break;
+    case DW_TAG_const_type:
+      read_tag_const_type (die, objfile);
+      break;
+    case DW_TAG_volatile_type:
+      read_tag_volatile_type (die, objfile);
+      break;
+    case DW_TAG_string_type:
+      read_tag_string_type (die, objfile);
+      break;
+    case DW_TAG_typedef:
+      read_typedef (die, objfile);
+      break;
+    case DW_TAG_base_type:
+      read_base_type (die, objfile);
+      break;
+    default:
+      complain (&dwarf2_unexpected_tag, dwarf_tag_name (die->tag));
+      break;
+    }
+}
+
+static struct type *
+dwarf_base_type (encoding, size, objfile)
+     int encoding;
+     int size;
+     struct objfile *objfile;
+{
+  /* FIXME - this should not produce a new (struct type *)
+     every time.  It should cache base types.  */
+  struct type *type;
+  switch (encoding)
+    {
+    case DW_ATE_address:
+      type = dwarf2_fundamental_type (objfile, FT_VOID);
+      return type;
+    case DW_ATE_boolean:
+      type = dwarf2_fundamental_type (objfile, FT_BOOLEAN);
+      return type;
+    case DW_ATE_complex_float:
+      if (size == 16)
+	{
+	  type = dwarf2_fundamental_type (objfile, FT_DBL_PREC_COMPLEX);
+	}
+      else
+	{
+	  type = dwarf2_fundamental_type (objfile, FT_COMPLEX);
+	}
+      return type;
+    case DW_ATE_float:
+      if (size == 8)
+	{
+	  type = dwarf2_fundamental_type (objfile, FT_DBL_PREC_FLOAT);
+	}
+      else
+	{
+	  type = dwarf2_fundamental_type (objfile, FT_FLOAT);
+	}
+      return type;
+    case DW_ATE_signed:
+      switch (size)
+	{
+	case 1:
+	  type = dwarf2_fundamental_type (objfile, FT_SIGNED_CHAR);
+	  break;
+	case 2:
+	  type = dwarf2_fundamental_type (objfile, FT_SIGNED_SHORT);
+	  break;
+	default:
+	case 4:
+	  type = dwarf2_fundamental_type (objfile, FT_SIGNED_INTEGER);
+	  break;
+	}
+      return type;
+    case DW_ATE_signed_char:
+      type = dwarf2_fundamental_type (objfile, FT_SIGNED_CHAR);
+      return type;
+    case DW_ATE_unsigned:
+      switch (size)
+	{
+	case 1:
+	  type = dwarf2_fundamental_type (objfile, FT_UNSIGNED_CHAR);
+	  break;
+	case 2:
+	  type = dwarf2_fundamental_type (objfile, FT_UNSIGNED_SHORT);
+	  break;
+	default:
+	case 4:
+	  type = dwarf2_fundamental_type (objfile, FT_UNSIGNED_INTEGER);
+	  break;
+	}
+      return type;
+    case DW_ATE_unsigned_char:
+      type = dwarf2_fundamental_type (objfile, FT_UNSIGNED_CHAR);
+      return type;
+    default:
+      type = dwarf2_fundamental_type (objfile, FT_SIGNED_INTEGER);
+      return type;
+    }
+}
+
+#if 0
+struct die_info *
+copy_die (old_die)
+     struct die_info *old_die;
+{
+  struct die_info *new_die;
+  int i, num_attrs;
+
+  new_die = (struct die_info *) xmalloc (sizeof (struct die_info));
+  memset (new_die, 0, sizeof (struct die_info));
+
+  new_die->tag = old_die->tag;
+  new_die->has_children = old_die->has_children;
+  new_die->abbrev = old_die->abbrev;
+  new_die->offset = old_die->offset;
+  new_die->type = NULL;
+
+  num_attrs = old_die->num_attrs;
+  new_die->num_attrs = num_attrs;
+  new_die->attrs = (struct attribute *)
+    xmalloc (num_attrs * sizeof (struct attribute));
+
+  for (i = 0; i < old_die->num_attrs; ++i)
+    {
+      new_die->attrs[i].name = old_die->attrs[i].name;
+      new_die->attrs[i].form = old_die->attrs[i].form;
+      new_die->attrs[i].u.addr = old_die->attrs[i].u.addr;
+    }
+
+  new_die->next = NULL;
+  return new_die;
+}
+#endif
+
+/* Return sibling of die, NULL if no sibling.  */
+
+struct die_info *
+sibling_die (die)
+     struct die_info *die;
+{
+  int nesting_level = 0;
+
+  if (!die->has_children)
+    {
+      if (die->next && (die->next->tag == 0))
+	{
+	  return NULL;
+	}
+      else
+	{
+	  return die->next;
+	}
+    }
+  else
+    {
+      do
+	{
+	  if (die->has_children)
+	    {
+	      nesting_level++;
+	    }
+	  if (die->tag == 0)
+	    {
+	      nesting_level--;
+	    }
+	  die = die->next;
+	}
+      while (nesting_level);
+      if (die && (die->tag == 0))
+	{
+	  return NULL;
+	}
+      else
+	{
+	  return die;
+	}
+    }
+}
+
+/* Get linkage name of a die, return NULL if not found.  */
+
+static char *
+dwarf2_linkage_name (die)
+     struct die_info *die;
+{
+  struct attribute *attr;
+
+  attr = dwarf_attr (die, DW_AT_MIPS_linkage_name);
+  if (attr && DW_STRING (attr))
+    return DW_STRING (attr);
+  attr = dwarf_attr (die, DW_AT_name);
+  if (attr && DW_STRING (attr))
+    return DW_STRING (attr);
+  return NULL;
+}
+
+/* Convert a DIE tag into its string name.  */
+
+static char *
+dwarf_tag_name (tag)
+     register unsigned tag;
+{
+  switch (tag)
+    {
+    case DW_TAG_padding:
+      return "DW_TAG_padding";
+    case DW_TAG_array_type:
+      return "DW_TAG_array_type";
+    case DW_TAG_class_type:
+      return "DW_TAG_class_type";
+    case DW_TAG_entry_point:
+      return "DW_TAG_entry_point";
+    case DW_TAG_enumeration_type:
+      return "DW_TAG_enumeration_type";
+    case DW_TAG_formal_parameter:
+      return "DW_TAG_formal_parameter";
+    case DW_TAG_imported_declaration:
+      return "DW_TAG_imported_declaration";
+    case DW_TAG_label:
+      return "DW_TAG_label";
+    case DW_TAG_lexical_block:
+      return "DW_TAG_lexical_block";
+    case DW_TAG_member:
+      return "DW_TAG_member";
+    case DW_TAG_pointer_type:
+      return "DW_TAG_pointer_type";
+    case DW_TAG_reference_type:
+      return "DW_TAG_reference_type";
+    case DW_TAG_compile_unit:
+      return "DW_TAG_compile_unit";
+    case DW_TAG_string_type:
+      return "DW_TAG_string_type";
+    case DW_TAG_structure_type:
+      return "DW_TAG_structure_type";
+    case DW_TAG_subroutine_type:
+      return "DW_TAG_subroutine_type";
+    case DW_TAG_typedef:
+      return "DW_TAG_typedef";
+    case DW_TAG_union_type:
+      return "DW_TAG_union_type";
+    case DW_TAG_unspecified_parameters:
+      return "DW_TAG_unspecified_parameters";
+    case DW_TAG_variant:
+      return "DW_TAG_variant";
+    case DW_TAG_common_block:
+      return "DW_TAG_common_block";
+    case DW_TAG_common_inclusion:
+      return "DW_TAG_common_inclusion";
+    case DW_TAG_inheritance:
+      return "DW_TAG_inheritance";
+    case DW_TAG_inlined_subroutine:
+      return "DW_TAG_inlined_subroutine";
+    case DW_TAG_module:
+      return "DW_TAG_module";
+    case DW_TAG_ptr_to_member_type:
+      return "DW_TAG_ptr_to_member_type";
+    case DW_TAG_set_type:
+      return "DW_TAG_set_type";
+    case DW_TAG_subrange_type:
+      return "DW_TAG_subrange_type";
+    case DW_TAG_with_stmt:
+      return "DW_TAG_with_stmt";
+    case DW_TAG_access_declaration:
+      return "DW_TAG_access_declaration";
+    case DW_TAG_base_type:
+      return "DW_TAG_base_type";
+    case DW_TAG_catch_block:
+      return "DW_TAG_catch_block";
+    case DW_TAG_const_type:
+      return "DW_TAG_const_type";
+    case DW_TAG_constant:
+      return "DW_TAG_constant";
+    case DW_TAG_enumerator:
+      return "DW_TAG_enumerator";
+    case DW_TAG_file_type:
+      return "DW_TAG_file_type";
+    case DW_TAG_friend:
+      return "DW_TAG_friend";
+    case DW_TAG_namelist:
+      return "DW_TAG_namelist";
+    case DW_TAG_namelist_item:
+      return "DW_TAG_namelist_item";
+    case DW_TAG_packed_type:
+      return "DW_TAG_packed_type";
+    case DW_TAG_subprogram:
+      return "DW_TAG_subprogram";
+    case DW_TAG_template_type_param:
+      return "DW_TAG_template_type_param";
+    case DW_TAG_template_value_param:
+      return "DW_TAG_template_value_param";
+    case DW_TAG_thrown_type:
+      return "DW_TAG_thrown_type";
+    case DW_TAG_try_block:
+      return "DW_TAG_try_block";
+    case DW_TAG_variant_part:
+      return "DW_TAG_variant_part";
+    case DW_TAG_variable:
+      return "DW_TAG_variable";
+    case DW_TAG_volatile_type:
+      return "DW_TAG_volatile_type";
+    case DW_TAG_MIPS_loop:
+      return "DW_TAG_MIPS_loop";
+    case DW_TAG_format_label:
+      return "DW_TAG_format_label";
+    case DW_TAG_function_template:
+      return "DW_TAG_function_template";
+    case DW_TAG_class_template:
+      return "DW_TAG_class_template";
+    default:
+      return "DW_TAG_<unknown>";
+    }
+}
+
+/* Convert a DWARF attribute code into its string name.  */
+
+static char *
+dwarf_attr_name (attr)
+     register unsigned attr;
+{
+  switch (attr)
+    {
+    case DW_AT_sibling:
+      return "DW_AT_sibling";
+    case DW_AT_location:
+      return "DW_AT_location";
+    case DW_AT_name:
+      return "DW_AT_name";
+    case DW_AT_ordering:
+      return "DW_AT_ordering";
+    case DW_AT_subscr_data:
+      return "DW_AT_subscr_data";
+    case DW_AT_byte_size:
+      return "DW_AT_byte_size";
+    case DW_AT_bit_offset:
+      return "DW_AT_bit_offset";
+    case DW_AT_bit_size:
+      return "DW_AT_bit_size";
+    case DW_AT_element_list:
+      return "DW_AT_element_list";
+    case DW_AT_stmt_list:
+      return "DW_AT_stmt_list";
+    case DW_AT_low_pc:
+      return "DW_AT_low_pc";
+    case DW_AT_high_pc:
+      return "DW_AT_high_pc";
+    case DW_AT_language:
+      return "DW_AT_language";
+    case DW_AT_member:
+      return "DW_AT_member";
+    case DW_AT_discr:
+      return "DW_AT_discr";
+    case DW_AT_discr_value:
+      return "DW_AT_discr_value";
+    case DW_AT_visibility:
+      return "DW_AT_visibility";
+    case DW_AT_import:
+      return "DW_AT_import";
+    case DW_AT_string_length:
+      return "DW_AT_string_length";
+    case DW_AT_common_reference:
+      return "DW_AT_common_reference";
+    case DW_AT_comp_dir:
+      return "DW_AT_comp_dir";
+    case DW_AT_const_value:
+      return "DW_AT_const_value";
+    case DW_AT_containing_type:
+      return "DW_AT_containing_type";
+    case DW_AT_default_value:
+      return "DW_AT_default_value";
+    case DW_AT_inline:
+      return "DW_AT_inline";
+    case DW_AT_is_optional:
+      return "DW_AT_is_optional";
+    case DW_AT_lower_bound:
+      return "DW_AT_lower_bound";
+    case DW_AT_producer:
+      return "DW_AT_producer";
+    case DW_AT_prototyped:
+      return "DW_AT_prototyped";
+    case DW_AT_return_addr:
+      return "DW_AT_return_addr";
+    case DW_AT_start_scope:
+      return "DW_AT_start_scope";
+    case DW_AT_stride_size:
+      return "DW_AT_stride_size";
+    case DW_AT_upper_bound:
+      return "DW_AT_upper_bound";
+    case DW_AT_abstract_origin:
+      return "DW_AT_abstract_origin";
+    case DW_AT_accessibility:
+      return "DW_AT_accessibility";
+    case DW_AT_address_class:
+      return "DW_AT_address_class";
+    case DW_AT_artificial:
+      return "DW_AT_artificial";
+    case DW_AT_base_types:
+      return "DW_AT_base_types";
+    case DW_AT_calling_convention:
+      return "DW_AT_calling_convention";
+    case DW_AT_count:
+      return "DW_AT_count";
+    case DW_AT_data_member_location:
+      return "DW_AT_data_member_location";
+    case DW_AT_decl_column:
+      return "DW_AT_decl_column";
+    case DW_AT_decl_file:
+      return "DW_AT_decl_file";
+    case DW_AT_decl_line:
+      return "DW_AT_decl_line";
+    case DW_AT_declaration:
+      return "DW_AT_declaration";
+    case DW_AT_discr_list:
+      return "DW_AT_discr_list";
+    case DW_AT_encoding:
+      return "DW_AT_encoding";
+    case DW_AT_external:
+      return "DW_AT_external";
+    case DW_AT_frame_base:
+      return "DW_AT_frame_base";
+    case DW_AT_friend:
+      return "DW_AT_friend";
+    case DW_AT_identifier_case:
+      return "DW_AT_identifier_case";
+    case DW_AT_macro_info:
+      return "DW_AT_macro_info";
+    case DW_AT_namelist_items:
+      return "DW_AT_namelist_items";
+    case DW_AT_priority:
+      return "DW_AT_priority";
+    case DW_AT_segment:
+      return "DW_AT_segment";
+    case DW_AT_specification:
+      return "DW_AT_specification";
+    case DW_AT_static_link:
+      return "DW_AT_static_link";
+    case DW_AT_type:
+      return "DW_AT_type";
+    case DW_AT_use_location:
+      return "DW_AT_use_location";
+    case DW_AT_variable_parameter:
+      return "DW_AT_variable_parameter";
+    case DW_AT_virtuality:
+      return "DW_AT_virtuality";
+    case DW_AT_vtable_elem_location:
+      return "DW_AT_vtable_elem_location";
+
+#ifdef MIPS
+    case DW_AT_MIPS_fde:
+      return "DW_AT_MIPS_fde";
+    case DW_AT_MIPS_loop_begin:
+      return "DW_AT_MIPS_loop_begin";
+    case DW_AT_MIPS_tail_loop_begin:
+      return "DW_AT_MIPS_tail_loop_begin";
+    case DW_AT_MIPS_epilog_begin:
+      return "DW_AT_MIPS_epilog_begin";
+    case DW_AT_MIPS_loop_unroll_factor:
+      return "DW_AT_MIPS_loop_unroll_factor";
+    case DW_AT_MIPS_software_pipeline_depth:
+      return "DW_AT_MIPS_software_pipeline_depth";
+    case DW_AT_MIPS_linkage_name:
+      return "DW_AT_MIPS_linkage_name";
+#endif
+
+    case DW_AT_sf_names:
+      return "DW_AT_sf_names";
+    case DW_AT_src_info:
+      return "DW_AT_src_info";
+    case DW_AT_mac_info:
+      return "DW_AT_mac_info";
+    case DW_AT_src_coords:
+      return "DW_AT_src_coords";
+    case DW_AT_body_begin:
+      return "DW_AT_body_begin";
+    case DW_AT_body_end:
+      return "DW_AT_body_end";
+    default:
+      return "DW_AT_<unknown>";
+    }
+}
+
+/* Convert a DWARF value form code into its string name.  */
+
+static char *
+dwarf_form_name (form)
+     register unsigned form;
+{
+  switch (form)
+    {
+    case DW_FORM_addr:
+      return "DW_FORM_addr";
+    case DW_FORM_block2:
+      return "DW_FORM_block2";
+    case DW_FORM_block4:
+      return "DW_FORM_block4";
+    case DW_FORM_data2:
+      return "DW_FORM_data2";
+    case DW_FORM_data4:
+      return "DW_FORM_data4";
+    case DW_FORM_data8:
+      return "DW_FORM_data8";
+    case DW_FORM_string:
+      return "DW_FORM_string";
+    case DW_FORM_block:
+      return "DW_FORM_block";
+    case DW_FORM_block1:
+      return "DW_FORM_block1";
+    case DW_FORM_data1:
+      return "DW_FORM_data1";
+    case DW_FORM_flag:
+      return "DW_FORM_flag";
+    case DW_FORM_sdata:
+      return "DW_FORM_sdata";
+    case DW_FORM_strp:
+      return "DW_FORM_strp";
+    case DW_FORM_udata:
+      return "DW_FORM_udata";
+    case DW_FORM_ref_addr:
+      return "DW_FORM_ref_addr";
+    case DW_FORM_ref1:
+      return "DW_FORM_ref1";
+    case DW_FORM_ref2:
+      return "DW_FORM_ref2";
+    case DW_FORM_ref4:
+      return "DW_FORM_ref4";
+    case DW_FORM_ref8:
+      return "DW_FORM_ref8";
+    case DW_FORM_ref_udata:
+      return "DW_FORM_ref_udata";
+    case DW_FORM_indirect:
+      return "DW_FORM_indirect";
+    default:
+      return "DW_FORM_<unknown>";
+    }
+}
+
+/* Convert a DWARF stack opcode into its string name.  */
+
+static char *
+dwarf_stack_op_name (op)
+     register unsigned op;
+{
+  switch (op)
+    {
+    case DW_OP_addr:
+      return "DW_OP_addr";
+    case DW_OP_deref:
+      return "DW_OP_deref";
+    case DW_OP_const1u:
+      return "DW_OP_const1u";
+    case DW_OP_const1s:
+      return "DW_OP_const1s";
+    case DW_OP_const2u:
+      return "DW_OP_const2u";
+    case DW_OP_const2s:
+      return "DW_OP_const2s";
+    case DW_OP_const4u:
+      return "DW_OP_const4u";
+    case DW_OP_const4s:
+      return "DW_OP_const4s";
+    case DW_OP_const8u:
+      return "DW_OP_const8u";
+    case DW_OP_const8s:
+      return "DW_OP_const8s";
+    case DW_OP_constu:
+      return "DW_OP_constu";
+    case DW_OP_consts:
+      return "DW_OP_consts";
+    case DW_OP_dup:
+      return "DW_OP_dup";
+    case DW_OP_drop:
+      return "DW_OP_drop";
+    case DW_OP_over:
+      return "DW_OP_over";
+    case DW_OP_pick:
+      return "DW_OP_pick";
+    case DW_OP_swap:
+      return "DW_OP_swap";
+    case DW_OP_rot:
+      return "DW_OP_rot";
+    case DW_OP_xderef:
+      return "DW_OP_xderef";
+    case DW_OP_abs:
+      return "DW_OP_abs";
+    case DW_OP_and:
+      return "DW_OP_and";
+    case DW_OP_div:
+      return "DW_OP_div";
+    case DW_OP_minus:
+      return "DW_OP_minus";
+    case DW_OP_mod:
+      return "DW_OP_mod";
+    case DW_OP_mul:
+      return "DW_OP_mul";
+    case DW_OP_neg:
+      return "DW_OP_neg";
+    case DW_OP_not:
+      return "DW_OP_not";
+    case DW_OP_or:
+      return "DW_OP_or";
+    case DW_OP_plus:
+      return "DW_OP_plus";
+    case DW_OP_plus_uconst:
+      return "DW_OP_plus_uconst";
+    case DW_OP_shl:
+      return "DW_OP_shl";
+    case DW_OP_shr:
+      return "DW_OP_shr";
+    case DW_OP_shra:
+      return "DW_OP_shra";
+    case DW_OP_xor:
+      return "DW_OP_xor";
+    case DW_OP_bra:
+      return "DW_OP_bra";
+    case DW_OP_eq:
+      return "DW_OP_eq";
+    case DW_OP_ge:
+      return "DW_OP_ge";
+    case DW_OP_gt:
+      return "DW_OP_gt";
+    case DW_OP_le:
+      return "DW_OP_le";
+    case DW_OP_lt:
+      return "DW_OP_lt";
+    case DW_OP_ne:
+      return "DW_OP_ne";
+    case DW_OP_skip:
+      return "DW_OP_skip";
+    case DW_OP_lit0:
+      return "DW_OP_lit0";
+    case DW_OP_lit1:
+      return "DW_OP_lit1";
+    case DW_OP_lit2:
+      return "DW_OP_lit2";
+    case DW_OP_lit3:
+      return "DW_OP_lit3";
+    case DW_OP_lit4:
+      return "DW_OP_lit4";
+    case DW_OP_lit5:
+      return "DW_OP_lit5";
+    case DW_OP_lit6:
+      return "DW_OP_lit6";
+    case DW_OP_lit7:
+      return "DW_OP_lit7";
+    case DW_OP_lit8:
+      return "DW_OP_lit8";
+    case DW_OP_lit9:
+      return "DW_OP_lit9";
+    case DW_OP_lit10:
+      return "DW_OP_lit10";
+    case DW_OP_lit11:
+      return "DW_OP_lit11";
+    case DW_OP_lit12:
+      return "DW_OP_lit12";
+    case DW_OP_lit13:
+      return "DW_OP_lit13";
+    case DW_OP_lit14:
+      return "DW_OP_lit14";
+    case DW_OP_lit15:
+      return "DW_OP_lit15";
+    case DW_OP_lit16:
+      return "DW_OP_lit16";
+    case DW_OP_lit17:
+      return "DW_OP_lit17";
+    case DW_OP_lit18:
+      return "DW_OP_lit18";
+    case DW_OP_lit19:
+      return "DW_OP_lit19";
+    case DW_OP_lit20:
+      return "DW_OP_lit20";
+    case DW_OP_lit21:
+      return "DW_OP_lit21";
+    case DW_OP_lit22:
+      return "DW_OP_lit22";
+    case DW_OP_lit23:
+      return "DW_OP_lit23";
+    case DW_OP_lit24:
+      return "DW_OP_lit24";
+    case DW_OP_lit25:
+      return "DW_OP_lit25";
+    case DW_OP_lit26:
+      return "DW_OP_lit26";
+    case DW_OP_lit27:
+      return "DW_OP_lit27";
+    case DW_OP_lit28:
+      return "DW_OP_lit28";
+    case DW_OP_lit29:
+      return "DW_OP_lit29";
+    case DW_OP_lit30:
+      return "DW_OP_lit30";
+    case DW_OP_lit31:
+      return "DW_OP_lit31";
+    case DW_OP_reg0:
+      return "DW_OP_reg0";
+    case DW_OP_reg1:
+      return "DW_OP_reg1";
+    case DW_OP_reg2:
+      return "DW_OP_reg2";
+    case DW_OP_reg3:
+      return "DW_OP_reg3";
+    case DW_OP_reg4:
+      return "DW_OP_reg4";
+    case DW_OP_reg5:
+      return "DW_OP_reg5";
+    case DW_OP_reg6:
+      return "DW_OP_reg6";
+    case DW_OP_reg7:
+      return "DW_OP_reg7";
+    case DW_OP_reg8:
+      return "DW_OP_reg8";
+    case DW_OP_reg9:
+      return "DW_OP_reg9";
+    case DW_OP_reg10:
+      return "DW_OP_reg10";
+    case DW_OP_reg11:
+      return "DW_OP_reg11";
+    case DW_OP_reg12:
+      return "DW_OP_reg12";
+    case DW_OP_reg13:
+      return "DW_OP_reg13";
+    case DW_OP_reg14:
+      return "DW_OP_reg14";
+    case DW_OP_reg15:
+      return "DW_OP_reg15";
+    case DW_OP_reg16:
+      return "DW_OP_reg16";
+    case DW_OP_reg17:
+      return "DW_OP_reg17";
+    case DW_OP_reg18:
+      return "DW_OP_reg18";
+    case DW_OP_reg19:
+      return "DW_OP_reg19";
+    case DW_OP_reg20:
+      return "DW_OP_reg20";
+    case DW_OP_reg21:
+      return "DW_OP_reg21";
+    case DW_OP_reg22:
+      return "DW_OP_reg22";
+    case DW_OP_reg23:
+      return "DW_OP_reg23";
+    case DW_OP_reg24:
+      return "DW_OP_reg24";
+    case DW_OP_reg25:
+      return "DW_OP_reg25";
+    case DW_OP_reg26:
+      return "DW_OP_reg26";
+    case DW_OP_reg27:
+      return "DW_OP_reg27";
+    case DW_OP_reg28:
+      return "DW_OP_reg28";
+    case DW_OP_reg29:
+      return "DW_OP_reg29";
+    case DW_OP_reg30:
+      return "DW_OP_reg30";
+    case DW_OP_reg31:
+      return "DW_OP_reg31";
+    case DW_OP_breg0:
+      return "DW_OP_breg0";
+    case DW_OP_breg1:
+      return "DW_OP_breg1";
+    case DW_OP_breg2:
+      return "DW_OP_breg2";
+    case DW_OP_breg3:
+      return "DW_OP_breg3";
+    case DW_OP_breg4:
+      return "DW_OP_breg4";
+    case DW_OP_breg5:
+      return "DW_OP_breg5";
+    case DW_OP_breg6:
+      return "DW_OP_breg6";
+    case DW_OP_breg7:
+      return "DW_OP_breg7";
+    case DW_OP_breg8:
+      return "DW_OP_breg8";
+    case DW_OP_breg9:
+      return "DW_OP_breg9";
+    case DW_OP_breg10:
+      return "DW_OP_breg10";
+    case DW_OP_breg11:
+      return "DW_OP_breg11";
+    case DW_OP_breg12:
+      return "DW_OP_breg12";
+    case DW_OP_breg13:
+      return "DW_OP_breg13";
+    case DW_OP_breg14:
+      return "DW_OP_breg14";
+    case DW_OP_breg15:
+      return "DW_OP_breg15";
+    case DW_OP_breg16:
+      return "DW_OP_breg16";
+    case DW_OP_breg17:
+      return "DW_OP_breg17";
+    case DW_OP_breg18:
+      return "DW_OP_breg18";
+    case DW_OP_breg19:
+      return "DW_OP_breg19";
+    case DW_OP_breg20:
+      return "DW_OP_breg20";
+    case DW_OP_breg21:
+      return "DW_OP_breg21";
+    case DW_OP_breg22:
+      return "DW_OP_breg22";
+    case DW_OP_breg23:
+      return "DW_OP_breg23";
+    case DW_OP_breg24:
+      return "DW_OP_breg24";
+    case DW_OP_breg25:
+      return "DW_OP_breg25";
+    case DW_OP_breg26:
+      return "DW_OP_breg26";
+    case DW_OP_breg27:
+      return "DW_OP_breg27";
+    case DW_OP_breg28:
+      return "DW_OP_breg28";
+    case DW_OP_breg29:
+      return "DW_OP_breg29";
+    case DW_OP_breg30:
+      return "DW_OP_breg30";
+    case DW_OP_breg31:
+      return "DW_OP_breg31";
+    case DW_OP_regx:
+      return "DW_OP_regx";
+    case DW_OP_fbreg:
+      return "DW_OP_fbreg";
+    case DW_OP_bregx:
+      return "DW_OP_bregx";
+    case DW_OP_piece:
+      return "DW_OP_piece";
+    case DW_OP_deref_size:
+      return "DW_OP_deref_size";
+    case DW_OP_xderef_size:
+      return "DW_OP_xderef_size";
+    case DW_OP_nop:
+      return "DW_OP_nop";
+    default:
+      return "OP_<unknown>";
+    }
+}
+
+static char *
+dwarf_bool_name (mybool)
+     unsigned mybool;
+{
+  if (mybool)
+    return "TRUE";
+  else
+    return "FALSE";
+}
+
+/* Convert a DWARF type code into its string name.  */
+
+static char *
+dwarf_type_encoding_name (enc)
+     register unsigned enc;
+{
+  switch (enc)
+    {
+    case DW_ATE_address:
+      return "DW_ATE_address";
+    case DW_ATE_boolean:
+      return "DW_ATE_boolean";
+    case DW_ATE_complex_float:
+      return "DW_ATE_complex_float";
+    case DW_ATE_float:
+      return "DW_ATE_float";
+    case DW_ATE_signed:
+      return "DW_ATE_signed";
+    case DW_ATE_signed_char:
+      return "DW_ATE_signed_char";
+    case DW_ATE_unsigned:
+      return "DW_ATE_unsigned";
+    case DW_ATE_unsigned_char:
+      return "DW_ATE_unsigned_char";
+    default:
+      return "DW_ATE_<unknown>";
+    }
+}
+
+/* Convert a DWARF call frame info operation to its string name. */
+
+#if 0
+static char *
+dwarf_cfi_name (cfi_opc)
+     register unsigned cfi_opc;
+{
+  switch (cfi_opc)
+    {
+    case DW_CFA_advance_loc:
+      return "DW_CFA_advance_loc";
+    case DW_CFA_offset:
+      return "DW_CFA_offset";
+    case DW_CFA_restore:
+      return "DW_CFA_restore";
+    case DW_CFA_nop:
+      return "DW_CFA_nop";
+    case DW_CFA_set_loc:
+      return "DW_CFA_set_loc";
+    case DW_CFA_advance_loc1:
+      return "DW_CFA_advance_loc1";
+    case DW_CFA_advance_loc2:
+      return "DW_CFA_advance_loc2";
+    case DW_CFA_advance_loc4:
+      return "DW_CFA_advance_loc4";
+    case DW_CFA_offset_extended:
+      return "DW_CFA_offset_extended";
+    case DW_CFA_restore_extended:
+      return "DW_CFA_restore_extended";
+    case DW_CFA_undefined:
+      return "DW_CFA_undefined";
+    case DW_CFA_same_value:
+      return "DW_CFA_same_value";
+    case DW_CFA_register:
+      return "DW_CFA_register";
+    case DW_CFA_remember_state:
+      return "DW_CFA_remember_state";
+    case DW_CFA_restore_state:
+      return "DW_CFA_restore_state";
+    case DW_CFA_def_cfa:
+      return "DW_CFA_def_cfa";
+    case DW_CFA_def_cfa_register:
+      return "DW_CFA_def_cfa_register";
+    case DW_CFA_def_cfa_offset:
+      return "DW_CFA_def_cfa_offset";
+      /* SGI/MIPS specific */
+    case DW_CFA_MIPS_advance_loc8:
+      return "DW_CFA_MIPS_advance_loc8";
+    default:
+      return "DW_CFA_<unknown>";
+    }
+}
+#endif
+
+void
+dump_die (die)
+     struct die_info *die;
+{
+  unsigned int i;
+
+  fprintf (stderr, "Die: %s (abbrev = %d, offset = %d)\n",
+	   dwarf_tag_name (die->tag), die->abbrev, die->offset);
+  fprintf (stderr, "\thas children: %s\n",
+	   dwarf_bool_name (die->has_children));
+
+  fprintf (stderr, "\tattributes:\n");
+  for (i = 0; i < die->num_attrs; ++i)
+    {
+      fprintf (stderr, "\t\t%s (%s) ",
+	       dwarf_attr_name (die->attrs[i].name),
+	       dwarf_form_name (die->attrs[i].form));
+      switch (die->attrs[i].form)
+	{
+	case DW_FORM_ref_addr:
+	case DW_FORM_addr:
+	  fprintf (stderr, "address: ");
+	  print_address_numeric (DW_ADDR (&die->attrs[i]), 1, gdb_stderr);
+	  break;
+	case DW_FORM_block2:
+	case DW_FORM_block4:
+	case DW_FORM_block:
+	case DW_FORM_block1:
+	  fprintf (stderr, "block: size %d", DW_BLOCK (&die->attrs[i])->size);
+	  break;
+	case DW_FORM_data1:
+	case DW_FORM_data2:
+	case DW_FORM_data4:
+	case DW_FORM_ref1:
+	case DW_FORM_ref2:
+	case DW_FORM_ref4:
+	case DW_FORM_udata:
+	case DW_FORM_sdata:
+	  fprintf (stderr, "constant: %d", DW_UNSND (&die->attrs[i]));
+	  break;
+	case DW_FORM_string:
+	  fprintf (stderr, "string: \"%s\"",
+		   DW_STRING (&die->attrs[i])
+		     ? DW_STRING (&die->attrs[i]) : "");
+	  break;
+	case DW_FORM_flag:
+	  if (DW_UNSND (&die->attrs[i]))
+	    fprintf (stderr, "flag: TRUE");
+	  else
+	    fprintf (stderr, "flag: FALSE");
+	  break;
+	case DW_FORM_strp:	/* we do not support separate string
+				   section yet */
+	case DW_FORM_indirect:	/* we do not handle indirect yet */
+	case DW_FORM_data8:	/* we do not have 64 bit quantities */
+	default:
+	  fprintf (stderr, "unsupported attribute form: %d.",
+			   die->attrs[i].form);
+	}
+      fprintf (stderr, "\n");
+    }
+}
+
+void
+dump_die_list (die)
+     struct die_info *die;
+{
+  while (die)
+    {
+      dump_die (die);
+      die = die->next;
+    }
+}
+
+void
+store_in_ref_table (offset, die)
+     unsigned int offset;
+     struct die_info *die;
+{
+  int h;
+  struct die_info *old;
+
+  h = (offset % REF_HASH_SIZE);
+  old = die_ref_table[h];
+  die->next_ref = old;
+  die_ref_table[h] = die;
+}
+
+
+static void
+dwarf2_empty_die_ref_table ()
+{
+  memset (die_ref_table, 0, sizeof (die_ref_table));
+}
+
+static unsigned int
+dwarf2_get_ref_die_offset (attr)
+     struct attribute *attr;
+{
+  unsigned int result = 0;
+
+  switch (attr->form)
+    {
+    case DW_FORM_ref_addr:
+      result = DW_ADDR (attr);
+      break;
+    case DW_FORM_ref1:
+    case DW_FORM_ref2:
+    case DW_FORM_ref4:
+    case DW_FORM_ref_udata:
+      result = cu_header_offset + DW_UNSND (attr);
+      break;
+    default:
+      complain (&dwarf2_unsupported_die_ref_attr, dwarf_form_name (attr->form));
+    }
+  return result;
+}
+
+struct die_info *
+follow_die_ref (offset)
+     unsigned int offset;
+{
+  struct die_info *die;
+  int h;
+
+  h = (offset % REF_HASH_SIZE);
+  die = die_ref_table[h];
+  while (die)
+    {
+      if (die->offset == offset)
+	{
+	  return die;
+	}
+      die = die->next_ref;
+    }
+  return NULL;
+}
+
+static struct type *
+dwarf2_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  if (typeid < 0 || typeid >= FT_NUM_MEMBERS)
+    {
+      error ("Dwarf Error: internal error - invalid fundamental type id %d.",
+	     typeid);
+    }
+
+  /* Look for this particular type in the fundamental type vector.  If
+     one is not found, create and install one appropriate for the
+     current language and the current target machine. */
+
+  if (ftypes[typeid] == NULL)
+    {
+      ftypes[typeid] = cu_language_defn->la_fund_type (objfile, typeid);
+    }
+
+  return (ftypes[typeid]);
+}
+
+/* Decode simple location descriptions.
+   Given a pointer to a dwarf block that defines a location, compute
+   the location and return the value.
+
+   FIXME: This is a kludge until we figure out a better
+   way to handle the location descriptions.
+   Gdb's design does not mesh well with the DWARF2 notion of a location
+   computing interpreter, which is a shame because the flexibility goes unused.
+   FIXME: Implement more operations as necessary.
+
+   A location description containing no operations indicates that the
+   object is optimized out. The global optimized_out flag is set for
+   those, the return value is meaningless.
+
+   When the result is a register number, the global isreg flag is set,
+   otherwise it is cleared.
+
+   When the result is a base register offset, the global offreg flag is set
+   and the register number is returned in basereg, otherwise it is cleared.
+
+   When the DW_OP_fbreg operation is encountered without a corresponding
+   DW_AT_frame_base attribute, the global islocal flag is set.
+   Hopefully the machine dependent code knows how to set up a virtual
+   frame pointer for the local references.
+ 
+   Note that stack[0] is unused except as a default error return.
+   Note that stack overflow is not yet handled.  */
+
+static CORE_ADDR
+decode_locdesc (blk, objfile)
+     struct dwarf_block *blk;
+     struct objfile *objfile;
+{
+  int i;
+  int size = blk->size;
+  char *data = blk->data;
+  CORE_ADDR stack[64];
+  int stacki;
+  unsigned int bytes_read, unsnd;
+  unsigned char op;
+
+  i = 0;
+  stacki = 0;
+  stack[stacki] = 0;
+  isreg = 0;
+  offreg = 0;
+  islocal = 0;
+  optimized_out = 1;
+
+  while (i < size)
+    {
+      optimized_out = 0;
+      op = data[i++];
+      switch (op)
+	{
+	case DW_OP_reg0:
+	case DW_OP_reg1:
+	case DW_OP_reg2:
+	case DW_OP_reg3:
+	case DW_OP_reg4:
+	case DW_OP_reg5:
+	case DW_OP_reg6:
+	case DW_OP_reg7:
+	case DW_OP_reg8:
+	case DW_OP_reg9:
+	case DW_OP_reg10:
+	case DW_OP_reg11:
+	case DW_OP_reg12:
+	case DW_OP_reg13:
+	case DW_OP_reg14:
+	case DW_OP_reg15:
+	case DW_OP_reg16:
+	case DW_OP_reg17:
+	case DW_OP_reg18:
+	case DW_OP_reg19:
+	case DW_OP_reg20:
+	case DW_OP_reg21:
+	case DW_OP_reg22:
+	case DW_OP_reg23:
+	case DW_OP_reg24:
+	case DW_OP_reg25:
+	case DW_OP_reg26:
+	case DW_OP_reg27:
+	case DW_OP_reg28:
+	case DW_OP_reg29:
+	case DW_OP_reg30:
+	case DW_OP_reg31:
+	  isreg = 1;
+	  stack[++stacki] = op - DW_OP_reg0;
+	  break;
+
+	case DW_OP_regx:
+	  isreg = 1;
+	  unsnd = read_unsigned_leb128 (NULL, (data + i), &bytes_read);
+	  i += bytes_read;
+#if defined(HARRIS_TARGET) && defined(_M88K)
+	  /* The Harris 88110 gdb ports have long kept their special reg
+	     numbers between their gp-regs and their x-regs.  This is
+	     not how our dwarf is generated.  Punt. */
+	  unsnd += 6;
+#endif
+	  stack[++stacki] = unsnd;
+	  break;
+
+	case DW_OP_breg0:
+	case DW_OP_breg1:
+	case DW_OP_breg2:
+	case DW_OP_breg3:
+	case DW_OP_breg4:
+	case DW_OP_breg5:
+	case DW_OP_breg6:
+	case DW_OP_breg7:
+	case DW_OP_breg8:
+	case DW_OP_breg9:
+	case DW_OP_breg10:
+	case DW_OP_breg11:
+	case DW_OP_breg12:
+	case DW_OP_breg13:
+	case DW_OP_breg14:
+	case DW_OP_breg15:
+	case DW_OP_breg16:
+	case DW_OP_breg17:
+	case DW_OP_breg18:
+	case DW_OP_breg19:
+	case DW_OP_breg20:
+	case DW_OP_breg21:
+	case DW_OP_breg22:
+	case DW_OP_breg23:
+	case DW_OP_breg24:
+	case DW_OP_breg25:
+	case DW_OP_breg26:
+	case DW_OP_breg27:
+	case DW_OP_breg28:
+	case DW_OP_breg29:
+	case DW_OP_breg30:
+	case DW_OP_breg31:
+	  offreg = 1;
+	  basereg = op - DW_OP_breg0;
+	  stack[++stacki] = read_signed_leb128 (NULL, (data + i), &bytes_read);
+	  i += bytes_read;
+	  break;
+
+	case DW_OP_fbreg:
+	  stack[++stacki] = read_signed_leb128 (NULL, (data + i), &bytes_read);
+	  i += bytes_read;
+	  if (frame_base_reg >= 0)
+	    {
+	      offreg = 1;
+	      basereg = frame_base_reg;
+	      stack[stacki] += frame_base_offset;
+	    }
+	  else
+	    {
+	      complain (&dwarf2_missing_at_frame_base);
+	      islocal = 1;
+	    }
+	  break;
+
+	case DW_OP_addr:
+	  stack[++stacki] = read_address (objfile->obfd, &data[i]);
+	  i += address_size;
+	  break;
+
+	case DW_OP_const1u:
+	  stack[++stacki] = read_1_byte (objfile->obfd, &data[i]);
+	  i += 1;
+	  break;
+
+	case DW_OP_const1s:
+	  stack[++stacki] = read_1_signed_byte (objfile->obfd, &data[i]);
+	  i += 1;
+	  break;
+
+	case DW_OP_const2u:
+	  stack[++stacki] = read_2_bytes (objfile->obfd, &data[i]);
+	  i += 2;
+	  break;
+
+	case DW_OP_const2s:
+	  stack[++stacki] = read_2_signed_bytes (objfile->obfd, &data[i]);
+	  i += 2;
+	  break;
+
+	case DW_OP_const4u:
+	  stack[++stacki] = read_4_bytes (objfile->obfd, &data[i]);
+	  i += 4;
+	  break;
+
+	case DW_OP_const4s:
+	  stack[++stacki] = read_4_signed_bytes (objfile->obfd, &data[i]);
+	  i += 4;
+	  break;
+
+	case DW_OP_constu:
+	  stack[++stacki] = read_unsigned_leb128 (NULL, (data + i),
+							 &bytes_read);
+	  i += bytes_read;
+	  break;
+
+	case DW_OP_consts:
+	  stack[++stacki] = read_signed_leb128 (NULL, (data + i), &bytes_read);
+	  i += bytes_read;
+	  break;
+
+	case DW_OP_plus:
+	  stack[stacki - 1] += stack[stacki];
+	  stacki--;
+	  break;
+
+	case DW_OP_plus_uconst:
+	  stack[stacki] += read_unsigned_leb128 (NULL, (data + i), &bytes_read);
+	  i += bytes_read;
+	  break;
+
+	case DW_OP_minus:
+	  stack[stacki - 1] = stack[stacki] - stack[stacki - 1];
+	  stacki--;
+	  break;
+
+	default:
+	  complain (&dwarf2_unsupported_stack_op, dwarf_stack_op_name(op));
+	  return (stack[stacki]);
+	}
+    }
+  return (stack[stacki]);
+}
+
+/* memory allocation interface */
+
+/* ARGSUSED */
+static void
+dwarf2_free_tmp_obstack (ignore)
+     PTR ignore;
+{
+  obstack_free (&dwarf2_tmp_obstack, NULL);
+}
+
+static struct dwarf_block *
+dwarf_alloc_block ()
+{
+  struct dwarf_block *blk;
+
+  blk = (struct dwarf_block *)
+    obstack_alloc (&dwarf2_tmp_obstack, sizeof (struct dwarf_block));
+  return (blk);
+}
+
+static struct abbrev_info *
+dwarf_alloc_abbrev ()
+{
+  struct abbrev_info *abbrev;
+
+  abbrev = (struct abbrev_info *) xmalloc (sizeof (struct abbrev_info));
+  memset (abbrev, 0, sizeof (struct abbrev_info));
+  return (abbrev);
+}
+
+static struct die_info *
+dwarf_alloc_die ()
+{
+  struct die_info *die;
+
+  die = (struct die_info *) xmalloc (sizeof (struct die_info));
+  memset (die, 0, sizeof (struct die_info));
+  return (die);
+}
diff --git a/gdb/dwarfread.c b/gdb/dwarfread.c
new file mode 100644
index 0000000..9de0312
--- /dev/null
+++ b/gdb/dwarfread.c
@@ -0,0 +1,3915 @@
+/* DWARF debugging format support for GDB.
+   Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1998
+   Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.  Portions based on dbxread.c,
+   mipsread.c, coffread.c, and dwarfread.c from a Data General SVR4 gdb port.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+
+FIXME: Do we need to generate dependencies in partial symtabs?
+(Perhaps we don't need to).
+
+FIXME: Resolve minor differences between what information we put in the
+partial symbol table and what dbxread puts in.  For example, we don't yet
+put enum constants there.  And dbxread seems to invent a lot of typedefs
+we never see.  Use the new printpsym command to see the partial symbol table
+contents.
+
+FIXME: Figure out a better way to tell gdb about the name of the function
+contain the user's entry point (I.E. main())
+
+FIXME: See other FIXME's and "ifdef 0" scattered throughout the code for
+other things to work on, if you get bored. :-)
+
+*/
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "elf/dwarf.h"
+#include "buildsym.h"
+#include "demangle.h"
+#include "expression.h"	/* Needed for enum exp_opcode in language.h, sigh... */
+#include "language.h"
+#include "complaints.h"
+
+#include <fcntl.h>
+#include "gdb_string.h"
+
+/* Some macros to provide DIE info for complaints. */
+
+#define DIE_ID (curdie!=NULL ? curdie->die_ref : 0)
+#define DIE_NAME (curdie!=NULL && curdie->at_name!=NULL) ? curdie->at_name : ""
+
+/* Complaints that can be issued during DWARF debug info reading. */
+
+struct complaint no_bfd_get_N =
+{
+  "DIE @ 0x%x \"%s\", no bfd support for %d byte data object", 0, 0
+};
+
+struct complaint malformed_die =
+{
+  "DIE @ 0x%x \"%s\", malformed DIE, bad length (%d bytes)", 0, 0
+};
+
+struct complaint bad_die_ref =
+{
+  "DIE @ 0x%x \"%s\", reference to DIE (0x%x) outside compilation unit", 0, 0
+};
+
+struct complaint unknown_attribute_form =
+{
+  "DIE @ 0x%x \"%s\", unknown attribute form (0x%x)", 0, 0
+};
+
+struct complaint unknown_attribute_length =
+{
+  "DIE @ 0x%x \"%s\", unknown attribute length, skipped remaining attributes", 0, 0
+};
+
+struct complaint unexpected_fund_type =
+{
+  "DIE @ 0x%x \"%s\", unexpected fundamental type 0x%x", 0, 0
+};
+
+struct complaint unknown_type_modifier =
+{
+  "DIE @ 0x%x \"%s\", unknown type modifier %u", 0, 0
+};
+
+struct complaint volatile_ignored =
+{
+  "DIE @ 0x%x \"%s\", type modifier 'volatile' ignored", 0, 0
+};
+
+struct complaint const_ignored =
+{
+  "DIE @ 0x%x \"%s\", type modifier 'const' ignored", 0, 0
+};
+
+struct complaint botched_modified_type =
+{
+  "DIE @ 0x%x \"%s\", botched modified type decoding (mtype 0x%x)", 0, 0
+};
+
+struct complaint op_deref2 =
+{
+  "DIE @ 0x%x \"%s\", OP_DEREF2 address 0x%x not handled", 0, 0
+};
+
+struct complaint op_deref4 =
+{
+  "DIE @ 0x%x \"%s\", OP_DEREF4 address 0x%x not handled", 0, 0
+};
+
+struct complaint basereg_not_handled =
+{
+  "DIE @ 0x%x \"%s\", BASEREG %d not handled", 0, 0
+};
+
+struct complaint dup_user_type_allocation =
+{
+  "DIE @ 0x%x \"%s\", internal error: duplicate user type allocation", 0, 0
+};
+
+struct complaint dup_user_type_definition =
+{
+  "DIE @ 0x%x \"%s\", internal error: duplicate user type definition", 0, 0
+};
+
+struct complaint missing_tag =
+{
+  "DIE @ 0x%x \"%s\", missing class, structure, or union tag", 0, 0
+};
+
+struct complaint bad_array_element_type =
+{
+  "DIE @ 0x%x \"%s\", bad array element type attribute 0x%x", 0, 0
+};
+
+struct complaint subscript_data_items =
+{
+  "DIE @ 0x%x \"%s\", can't decode subscript data items", 0, 0
+};
+
+struct complaint unhandled_array_subscript_format =
+{
+  "DIE @ 0x%x \"%s\", array subscript format 0x%x not handled yet", 0, 0
+};
+
+struct complaint unknown_array_subscript_format =
+{
+  "DIE @ 0x%x \"%s\", unknown array subscript format %x", 0, 0
+};
+
+struct complaint not_row_major =
+{
+  "DIE @ 0x%x \"%s\", array not row major; not handled correctly", 0, 0
+};
+
+struct complaint missing_at_name =
+{
+  "DIE @ 0x%x, AT_name tag missing", 0, 0
+};
+
+typedef unsigned int DIE_REF;	/* Reference to a DIE */
+
+#ifndef GCC_PRODUCER
+#define GCC_PRODUCER "GNU C "
+#endif
+
+#ifndef GPLUS_PRODUCER
+#define GPLUS_PRODUCER "GNU C++ "
+#endif
+
+#ifndef LCC_PRODUCER
+#define LCC_PRODUCER "NCR C/C++"
+#endif
+
+#ifndef CHILL_PRODUCER
+#define CHILL_PRODUCER "GNU Chill "
+#endif
+
+/* Provide a default mapping from a DWARF register number to a gdb REGNUM.  */
+#ifndef DWARF_REG_TO_REGNUM
+#define DWARF_REG_TO_REGNUM(num) (num)
+#endif
+
+/* Flags to target_to_host() that tell whether or not the data object is
+   expected to be signed.  Used, for example, when fetching a signed
+   integer in the target environment which is used as a signed integer
+   in the host environment, and the two environments have different sized
+   ints.  In this case, *somebody* has to sign extend the smaller sized
+   int. */
+
+#define GET_UNSIGNED	0	/* No sign extension required */
+#define GET_SIGNED	1	/* Sign extension required */
+
+/* Defines for things which are specified in the document "DWARF Debugging
+   Information Format" published by UNIX International, Programming Languages
+   SIG.  These defines are based on revision 1.0.0, Jan 20, 1992. */
+
+#define SIZEOF_DIE_LENGTH	4
+#define SIZEOF_DIE_TAG		2
+#define SIZEOF_ATTRIBUTE	2
+#define SIZEOF_FORMAT_SPECIFIER	1
+#define SIZEOF_FMT_FT		2
+#define SIZEOF_LINETBL_LENGTH	4
+#define SIZEOF_LINETBL_LINENO	4
+#define SIZEOF_LINETBL_STMT	2
+#define SIZEOF_LINETBL_DELTA	4
+#define SIZEOF_LOC_ATOM_CODE	1
+
+#define FORM_FROM_ATTR(attr)	((attr) & 0xF)	/* Implicitly specified */
+
+/* Macros that return the sizes of various types of data in the target
+   environment.
+
+   FIXME:  Currently these are just compile time constants (as they are in
+   other parts of gdb as well).  They need to be able to get the right size
+   either from the bfd or possibly from the DWARF info.  It would be nice if
+   the DWARF producer inserted DIES that describe the fundamental types in
+   the target environment into the DWARF info, similar to the way dbx stabs
+   producers produce information about their fundamental types. */
+
+#define TARGET_FT_POINTER_SIZE(objfile)	(TARGET_PTR_BIT / TARGET_CHAR_BIT)
+#define TARGET_FT_LONG_SIZE(objfile)	(TARGET_LONG_BIT / TARGET_CHAR_BIT)
+
+/* The Amiga SVR4 header file <dwarf.h> defines AT_element_list as a
+   FORM_BLOCK2, and this is the value emitted by the AT&T compiler.
+   However, the Issue 2 DWARF specification from AT&T defines it as
+   a FORM_BLOCK4, as does the latest specification from UI/PLSIG.
+   For backwards compatibility with the AT&T compiler produced executables
+   we define AT_short_element_list for this variant. */
+
+#define	AT_short_element_list	 (0x00f0|FORM_BLOCK2)
+
+/* External variables referenced. */
+
+extern int info_verbose;		/* From main.c; nonzero => verbose */
+extern char *warning_pre_print;		/* From utils.c */
+
+/* The DWARF debugging information consists of two major pieces,
+   one is a block of DWARF Information Entries (DIE's) and the other
+   is a line number table.  The "struct dieinfo" structure contains
+   the information for a single DIE, the one currently being processed.
+
+   In order to make it easier to randomly access the attribute fields
+   of the current DIE, which are specifically unordered within the DIE,
+   each DIE is scanned and an instance of the "struct dieinfo"
+   structure is initialized.
+
+   Initialization is done in two levels.  The first, done by basicdieinfo(),
+   just initializes those fields that are vital to deciding whether or not
+   to use this DIE, how to skip past it, etc.  The second, done by the
+   function completedieinfo(), fills in the rest of the information.
+
+   Attributes which have block forms are not interpreted at the time
+   the DIE is scanned, instead we just save pointers to the start
+   of their value fields.
+
+   Some fields have a flag <name>_p that is set when the value of the
+   field is valid (I.E. we found a matching attribute in the DIE).  Since
+   we may want to test for the presence of some attributes in the DIE,
+   such as AT_low_pc, without restricting the values of the field,
+   we need someway to note that we found such an attribute.
+   
+ */
+   
+typedef char BLOCK;
+
+struct dieinfo {
+  char *		die;		/* Pointer to the raw DIE data */
+  unsigned long 	die_length;	/* Length of the raw DIE data */
+  DIE_REF		die_ref;	/* Offset of this DIE */
+  unsigned short	die_tag;	/* Tag for this DIE */
+  unsigned long		at_padding;
+  unsigned long		at_sibling;
+  BLOCK *		at_location;
+  char *		at_name;
+  unsigned short	at_fund_type;
+  BLOCK *		at_mod_fund_type;
+  unsigned long		at_user_def_type;
+  BLOCK *		at_mod_u_d_type;
+  unsigned short	at_ordering;
+  BLOCK *		at_subscr_data;
+  unsigned long		at_byte_size;
+  unsigned short	at_bit_offset;
+  unsigned long		at_bit_size;
+  BLOCK *		at_element_list;
+  unsigned long		at_stmt_list;
+  CORE_ADDR		at_low_pc;
+  CORE_ADDR		at_high_pc;
+  unsigned long		at_language;
+  unsigned long		at_member;
+  unsigned long		at_discr;
+  BLOCK *		at_discr_value;
+  BLOCK *		at_string_length;
+  char *		at_comp_dir;
+  char *		at_producer;
+  unsigned long		at_start_scope;
+  unsigned long		at_stride_size;
+  unsigned long		at_src_info;
+  char *		at_prototyped;
+  unsigned int		has_at_low_pc:1;
+  unsigned int		has_at_stmt_list:1;
+  unsigned int		has_at_byte_size:1;
+  unsigned int		short_element_list:1;
+
+  /* Kludge to identify register variables */
+
+  unsigned int		isreg;
+
+  /* Kludge to identify optimized out variables */
+
+  unsigned int		optimized_out;
+
+  /* Kludge to identify basereg references.
+     Nonzero if we have an offset relative to a basereg.  */
+
+  unsigned int		offreg;
+
+  /* Kludge to identify which base register is it relative to.  */
+
+  unsigned int		basereg;
+};
+
+static int diecount;	/* Approximate count of dies for compilation unit */
+static struct dieinfo *curdie;	/* For warnings and such */
+
+static char *dbbase;	/* Base pointer to dwarf info */
+static int dbsize;	/* Size of dwarf info in bytes */
+static int dbroff;	/* Relative offset from start of .debug section */
+static char *lnbase;	/* Base pointer to line section */
+
+/* This value is added to each symbol value.  FIXME:  Generalize to 
+   the section_offsets structure used by dbxread (once this is done,
+   pass the appropriate section number to end_symtab).  */
+static CORE_ADDR baseaddr;	/* Add to each symbol value */
+
+/* The section offsets used in the current psymtab or symtab.  FIXME,
+   only used to pass one value (baseaddr) at the moment.  */
+static struct section_offsets *base_section_offsets;
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct dwfinfo {
+  /* Always the absolute file offset to the start of the ".debug"
+     section for the file containing the DIE's being accessed.  */
+  file_ptr dbfoff;
+  /* Relative offset from the start of the ".debug" section to the
+     first DIE to be accessed.  When building the partial symbol
+     table, this value will be zero since we are accessing the
+     entire ".debug" section.  When expanding a partial symbol
+     table entry, this value will be the offset to the first
+     DIE for the compilation unit containing the symbol that
+     triggers the expansion.  */
+  int dbroff;
+  /* The size of the chunk of DIE's being examined, in bytes.  */
+  int dblength;
+  /* The absolute file offset to the line table fragment.  Ignored
+     when building partial symbol tables, but used when expanding
+     them, and contains the absolute file offset to the fragment
+     of the ".line" section containing the line numbers for the
+     current compilation unit.  */
+  file_ptr lnfoff;
+};
+
+#define DBFOFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->dbfoff)
+#define DBROFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->dbroff)
+#define DBLENGTH(p) (((struct dwfinfo *)((p)->read_symtab_private))->dblength)
+#define LNFOFF(p) (((struct dwfinfo *)((p)->read_symtab_private))->lnfoff)
+
+/* The generic symbol table building routines have separate lists for
+   file scope symbols and all all other scopes (local scopes).  So
+   we need to select the right one to pass to add_symbol_to_list().
+   We do it by keeping a pointer to the correct list in list_in_scope.
+
+   FIXME:  The original dwarf code just treated the file scope as the first
+   local scope, and all other local scopes as nested local scopes, and worked
+   fine.  Check to see if we really need to distinguish these in buildsym.c */
+
+struct pending **list_in_scope = &file_symbols;
+
+/* DIES which have user defined types or modified user defined types refer to
+   other DIES for the type information.  Thus we need to associate the offset
+   of a DIE for a user defined type with a pointer to the type information.
+
+   Originally this was done using a simple but expensive algorithm, with an
+   array of unsorted structures, each containing an offset/type-pointer pair.
+   This array was scanned linearly each time a lookup was done.  The result
+   was that gdb was spending over half it's startup time munging through this
+   array of pointers looking for a structure that had the right offset member.
+
+   The second attempt used the same array of structures, but the array was
+   sorted using qsort each time a new offset/type was recorded, and a binary
+   search was used to find the type pointer for a given DIE offset.  This was
+   even slower, due to the overhead of sorting the array each time a new
+   offset/type pair was entered.
+
+   The third attempt uses a fixed size array of type pointers, indexed by a
+   value derived from the DIE offset.  Since the minimum DIE size is 4 bytes,
+   we can divide any DIE offset by 4 to obtain a unique index into this fixed
+   size array.  Since each element is a 4 byte pointer, it takes exactly as
+   much memory to hold this array as to hold the DWARF info for a given
+   compilation unit.  But it gets freed as soon as we are done with it.
+   This has worked well in practice, as a reasonable tradeoff between memory
+   consumption and speed, without having to resort to much more complicated
+   algorithms. */
+
+static struct type **utypes;	/* Pointer to array of user type pointers */
+static int numutypes;		/* Max number of user type pointers */
+
+/* Maintain an array of referenced fundamental types for the current
+   compilation unit being read.  For DWARF version 1, we have to construct
+   the fundamental types on the fly, since no information about the
+   fundamental types is supplied.  Each such fundamental type is created by
+   calling a language dependent routine to create the type, and then a
+   pointer to that type is then placed in the array at the index specified
+   by it's FT_<TYPENAME> value.  The array has a fixed size set by the
+   FT_NUM_MEMBERS compile time constant, which is the number of predefined
+   fundamental types gdb knows how to construct. */
+
+static struct type *ftypes[FT_NUM_MEMBERS];  /* Fundamental types */
+
+/* Record the language for the compilation unit which is currently being
+   processed.  We know it once we have seen the TAG_compile_unit DIE,
+   and we need it while processing the DIE's for that compilation unit.
+   It is eventually saved in the symtab structure, but we don't finalize
+   the symtab struct until we have processed all the DIE's for the
+   compilation unit.  We also need to get and save a pointer to the 
+   language struct for this language, so we can call the language
+   dependent routines for doing things such as creating fundamental
+   types. */
+
+static enum language cu_language;
+static const struct language_defn *cu_language_defn;
+
+/* Forward declarations of static functions so we don't have to worry
+   about ordering within this file.  */
+
+static void
+free_utypes PARAMS ((PTR));
+
+static int
+attribute_size PARAMS ((unsigned int));
+
+static CORE_ADDR
+target_to_host PARAMS ((char *, int, int, struct objfile *));
+
+static void
+add_enum_psymbol PARAMS ((struct dieinfo *, struct objfile *));
+
+static void
+handle_producer PARAMS ((char *));
+
+static void
+read_file_scope PARAMS ((struct dieinfo *, char *, char *, struct objfile *));
+
+static void
+read_func_scope PARAMS ((struct dieinfo *, char *, char *, struct objfile *));
+
+static void
+read_lexical_block_scope PARAMS ((struct dieinfo *, char *, char *,
+				  struct objfile *));
+
+static void
+scan_partial_symbols PARAMS ((char *, char *, struct objfile *));
+
+static void
+scan_compilation_units PARAMS ((char *, char *, file_ptr,
+				file_ptr, struct objfile *));
+
+static void
+add_partial_symbol PARAMS ((struct dieinfo *, struct objfile *));
+
+static void
+basicdieinfo PARAMS ((struct dieinfo *, char *, struct objfile *));
+
+static void
+completedieinfo PARAMS ((struct dieinfo *, struct objfile *));
+
+static void
+dwarf_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+static void
+psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+
+static void
+read_ofile_symtab PARAMS ((struct partial_symtab *));
+
+static void
+process_dies PARAMS ((char *, char *, struct objfile *));
+
+static void
+read_structure_scope PARAMS ((struct dieinfo *, char *, char *,
+			      struct objfile *));
+
+static struct type *
+decode_array_element_type PARAMS ((char *));
+
+static struct type *
+decode_subscript_data_item PARAMS ((char *, char *));
+
+static void
+dwarf_read_array_type PARAMS ((struct dieinfo *));
+
+static void
+read_tag_pointer_type PARAMS ((struct dieinfo *dip));
+
+static void
+read_tag_string_type PARAMS ((struct dieinfo *dip));
+
+static void
+read_subroutine_type PARAMS ((struct dieinfo *, char *, char *));
+
+static void
+read_enumeration PARAMS ((struct dieinfo *, char *, char *, struct objfile *));
+
+static struct type *
+struct_type PARAMS ((struct dieinfo *, char *, char *, struct objfile *));
+
+static struct type *
+enum_type PARAMS ((struct dieinfo *, struct objfile *));
+
+static void
+decode_line_numbers PARAMS ((char *));
+
+static struct type *
+decode_die_type PARAMS ((struct dieinfo *));
+
+static struct type *
+decode_mod_fund_type PARAMS ((char *));
+
+static struct type *
+decode_mod_u_d_type PARAMS ((char *));
+
+static struct type *
+decode_modified_type PARAMS ((char *, unsigned int, int));
+
+static struct type *
+decode_fund_type PARAMS ((unsigned int));
+
+static char *
+create_name PARAMS ((char *, struct obstack *));
+
+static struct type *
+lookup_utype PARAMS ((DIE_REF));
+
+static struct type *
+alloc_utype PARAMS ((DIE_REF, struct type *));
+
+static struct symbol *
+new_symbol PARAMS ((struct dieinfo *, struct objfile *));
+
+static void
+synthesize_typedef PARAMS ((struct dieinfo *, struct objfile *,
+			    struct type *));
+
+static int
+locval PARAMS ((struct dieinfo *));
+
+static void
+set_cu_language PARAMS ((struct dieinfo *));
+
+static struct type *
+dwarf_fundamental_type PARAMS ((struct objfile *, int));
+
+
+/*
+
+LOCAL FUNCTION
+
+	dwarf_fundamental_type -- lookup or create a fundamental type
+
+SYNOPSIS
+
+	struct type *
+	dwarf_fundamental_type (struct objfile *objfile, int typeid)
+
+DESCRIPTION
+
+	DWARF version 1 doesn't supply any fundamental type information,
+	so gdb has to construct such types.  It has a fixed number of
+	fundamental types that it knows how to construct, which is the
+	union of all types that it knows how to construct for all languages
+	that it knows about.  These are enumerated in gdbtypes.h.
+
+	As an example, assume we find a DIE that references a DWARF
+	fundamental type of FT_integer.  We first look in the ftypes
+	array to see if we already have such a type, indexed by the
+	gdb internal value of FT_INTEGER.  If so, we simply return a
+	pointer to that type.  If not, then we ask an appropriate
+	language dependent routine to create a type FT_INTEGER, using
+	defaults reasonable for the current target machine, and install
+	that type in ftypes for future reference.
+
+RETURNS
+
+	Pointer to a fundamental type.
+
+*/
+
+static struct type *
+dwarf_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  if (typeid < 0 || typeid >= FT_NUM_MEMBERS)
+    {
+      error ("internal error - invalid fundamental type id %d", typeid);
+    }
+
+  /* Look for this particular type in the fundamental type vector.  If one is
+     not found, create and install one appropriate for the current language
+     and the current target machine. */
+
+  if (ftypes[typeid] == NULL)
+    {
+      ftypes[typeid] = cu_language_defn -> la_fund_type(objfile, typeid);
+    }
+
+  return (ftypes[typeid]);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	set_cu_language -- set local copy of language for compilation unit
+
+SYNOPSIS
+
+	void
+	set_cu_language (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Decode the language attribute for a compilation unit DIE and
+	remember what the language was.  We use this at various times
+	when processing DIE's for a given compilation unit.
+
+RETURNS
+
+	No return value.
+
+ */
+
+static void
+set_cu_language (dip)
+     struct dieinfo *dip;
+{
+  switch (dip -> at_language)
+    {
+      case LANG_C89:
+      case LANG_C:
+        cu_language = language_c;
+	break;
+      case LANG_C_PLUS_PLUS:
+	cu_language = language_cplus;
+	break;
+      case LANG_CHILL:
+	cu_language = language_chill;
+	break;
+      case LANG_MODULA2:
+	cu_language = language_m2;
+	break;
+      case LANG_FORTRAN77:
+      case LANG_FORTRAN90:
+	cu_language = language_fortran;
+	break;
+      case LANG_ADA83:
+      case LANG_COBOL74:
+      case LANG_COBOL85:
+      case LANG_PASCAL83:
+	/* We don't know anything special about these yet. */
+	cu_language = language_unknown;
+	break;
+      default:
+	/* If no at_language, try to deduce one from the filename */
+	cu_language = deduce_language_from_filename (dip -> at_name);
+	break;
+    }
+  cu_language_defn = language_def (cu_language);
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	dwarf_build_psymtabs -- build partial symtabs from DWARF debug info
+
+SYNOPSIS
+
+	void dwarf_build_psymtabs (struct objfile *objfile,
+	     struct section_offsets *section_offsets,
+	     int mainline, file_ptr dbfoff, unsigned int dbfsize,
+	     file_ptr lnoffset, unsigned int lnsize)
+
+DESCRIPTION
+
+	This function is called upon to build partial symtabs from files
+	containing DIE's (Dwarf Information Entries) and DWARF line numbers.
+
+	It is passed a bfd* containing the DIES
+	and line number information, the corresponding filename for that
+	file, a base address for relocating the symbols, a flag indicating
+	whether or not this debugging information is from a "main symbol
+	table" rather than a shared library or dynamically linked file,
+	and file offset/size pairs for the DIE information and line number
+	information.
+
+RETURNS
+
+	No return value.
+
+ */
+
+void
+dwarf_build_psymtabs (objfile, section_offsets, mainline, dbfoff, dbfsize,
+		      lnoffset, lnsize)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+     file_ptr dbfoff;
+     unsigned int dbfsize;
+     file_ptr lnoffset;
+     unsigned int lnsize;
+{
+  bfd *abfd = objfile->obfd;
+  struct cleanup *back_to;
+  
+  current_objfile = objfile;
+  dbsize = dbfsize;
+  dbbase = xmalloc (dbsize);
+  dbroff = 0;
+  if ((bfd_seek (abfd, dbfoff, SEEK_SET) != 0) ||
+      (bfd_read (dbbase, dbsize, 1, abfd) != dbsize))
+    {
+      free (dbbase);
+      error ("can't read DWARF data from '%s'", bfd_get_filename (abfd));
+    }
+  back_to = make_cleanup (free, dbbase);
+  
+  /* If we are reinitializing, or if we have never loaded syms yet, init.
+     Since we have no idea how many DIES we are looking at, we just guess
+     some arbitrary value. */
+  
+  if (mainline || objfile -> global_psymbols.size == 0 ||
+      objfile -> static_psymbols.size == 0)
+    {
+      init_psymbol_list (objfile, 1024);
+    }
+  
+  /* Save the relocation factor where everybody can see it.  */
+
+  base_section_offsets = section_offsets;
+  baseaddr = ANOFFSET (section_offsets, 0);
+
+  /* Follow the compilation unit sibling chain, building a partial symbol
+     table entry for each one.  Save enough information about each compilation
+     unit to locate the full DWARF information later. */
+  
+  scan_compilation_units (dbbase, dbbase + dbsize, dbfoff, lnoffset, objfile);
+  
+  do_cleanups (back_to);
+  current_objfile = NULL;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_lexical_block_scope -- process all dies in a lexical block
+
+SYNOPSIS
+
+	static void read_lexical_block_scope (struct dieinfo *dip,
+		char *thisdie, char *enddie)
+
+DESCRIPTION
+
+	Process all the DIES contained within a lexical block scope.
+	Start a new scope, process the dies, and then close the scope.
+
+ */
+
+static void
+read_lexical_block_scope (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+
+  push_context (0, dip -> at_low_pc);
+  process_dies (thisdie + dip -> die_length, enddie, objfile);
+  new = pop_context ();
+  if (local_symbols != NULL)
+    {
+      finish_block (0, &local_symbols, new -> old_blocks, new -> start_addr,
+		    dip -> at_high_pc, objfile);
+    }
+  local_symbols = new -> locals;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	lookup_utype -- look up a user defined type from die reference
+
+SYNOPSIS
+
+	static type *lookup_utype (DIE_REF die_ref)
+
+DESCRIPTION
+
+	Given a DIE reference, lookup the user defined type associated with
+	that DIE, if it has been registered already.  If not registered, then
+	return NULL.  Alloc_utype() can be called to register an empty
+	type for this reference, which will be filled in later when the
+	actual referenced DIE is processed.
+ */
+
+static struct type *
+lookup_utype (die_ref)
+     DIE_REF die_ref;
+{
+  struct type *type = NULL;
+  int utypeidx;
+  
+  utypeidx = (die_ref - dbroff) / 4;
+  if ((utypeidx < 0) || (utypeidx >= numutypes))
+    {
+      complain (&bad_die_ref, DIE_ID, DIE_NAME);
+    }
+  else
+    {
+      type = *(utypes + utypeidx);
+    }
+  return (type);
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	alloc_utype  -- add a user defined type for die reference
+
+SYNOPSIS
+
+	static type *alloc_utype (DIE_REF die_ref, struct type *utypep)
+
+DESCRIPTION
+
+	Given a die reference DIE_REF, and a possible pointer to a user
+	defined type UTYPEP, register that this reference has a user
+	defined type and either use the specified type in UTYPEP or
+	make a new empty type that will be filled in later.
+
+	We should only be called after calling lookup_utype() to verify that
+	there is not currently a type registered for DIE_REF.
+ */
+
+static struct type *
+alloc_utype (die_ref, utypep)
+     DIE_REF die_ref;
+     struct type *utypep;
+{
+  struct type **typep;
+  int utypeidx;
+  
+  utypeidx = (die_ref - dbroff) / 4;
+  typep = utypes + utypeidx;
+  if ((utypeidx < 0) || (utypeidx >= numutypes))
+    {
+      utypep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+      complain (&bad_die_ref, DIE_ID, DIE_NAME);
+    }
+  else if (*typep != NULL)
+    {
+      utypep = *typep;
+      complain (&dup_user_type_allocation, DIE_ID, DIE_NAME);
+    }
+  else
+    {
+      if (utypep == NULL)
+	{
+	  utypep = alloc_type (current_objfile);
+	}
+      *typep = utypep;
+    }
+  return (utypep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	free_utypes -- free the utypes array and reset pointer & count
+
+SYNOPSIS
+
+	static void free_utypes (PTR dummy)
+
+DESCRIPTION
+
+	Called via do_cleanups to free the utypes array, reset the pointer to NULL,
+	and set numutypes back to zero.  This ensures that the utypes does not get
+	referenced after being freed.
+ */
+
+static void
+free_utypes (dummy)
+     PTR dummy;
+{
+  free (utypes);
+  utypes = NULL;
+  numutypes = 0;
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	decode_die_type -- return a type for a specified die
+
+SYNOPSIS
+
+	static struct type *decode_die_type (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Given a pointer to a die information structure DIP, decode the
+	type of the die and return a pointer to the decoded type.  All
+	dies without specific types default to type int.
+ */
+
+static struct type *
+decode_die_type (dip)
+     struct dieinfo *dip;
+{
+  struct type *type = NULL;
+  
+  if (dip -> at_fund_type != 0)
+    {
+      type = decode_fund_type (dip -> at_fund_type);
+    }
+  else if (dip -> at_mod_fund_type != NULL)
+    {
+      type = decode_mod_fund_type (dip -> at_mod_fund_type);
+    }
+  else if (dip -> at_user_def_type)
+    {
+      if ((type = lookup_utype (dip -> at_user_def_type)) == NULL)
+	{
+	  type = alloc_utype (dip -> at_user_def_type, NULL);
+	}
+    }
+  else if (dip -> at_mod_u_d_type)
+    {
+      type = decode_mod_u_d_type (dip -> at_mod_u_d_type);
+    }
+  else
+    {
+      type = dwarf_fundamental_type (current_objfile, FT_VOID);
+    }
+  return (type);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	struct_type -- compute and return the type for a struct or union
+
+SYNOPSIS
+
+	static struct type *struct_type (struct dieinfo *dip, char *thisdie,
+	    char *enddie, struct objfile *objfile)
+
+DESCRIPTION
+
+	Given pointer to a die information structure for a die which
+	defines a union or structure (and MUST define one or the other),
+	and pointers to the raw die data that define the range of dies which
+	define the members, compute and return the user defined type for the
+	structure or union.
+ */
+
+static struct type *
+struct_type (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct nextfield {
+    struct nextfield *next;
+    struct field field;
+  };
+  struct nextfield *list = NULL;
+  struct nextfield *new;
+  int nfields = 0;
+  int n;
+  struct dieinfo mbr;
+  char *nextdie;
+  int anonymous_size;
+  
+  if ((type = lookup_utype (dip -> die_ref)) == NULL)
+    {
+      /* No forward references created an empty type, so install one now */
+      type = alloc_utype (dip -> die_ref, NULL);
+    }
+  INIT_CPLUS_SPECIFIC(type);
+  switch (dip -> die_tag)
+    {
+      case TAG_class_type:
+        TYPE_CODE (type) = TYPE_CODE_CLASS;
+	break;
+      case TAG_structure_type:
+        TYPE_CODE (type) = TYPE_CODE_STRUCT;
+	break;
+      case TAG_union_type:
+	TYPE_CODE (type) = TYPE_CODE_UNION;
+	break;
+      default:
+	/* Should never happen */
+	TYPE_CODE (type) = TYPE_CODE_UNDEF;
+	complain (&missing_tag, DIE_ID, DIE_NAME);
+	break;
+    }
+  /* Some compilers try to be helpful by inventing "fake" names for
+     anonymous enums, structures, and unions, like "~0fake" or ".0fake".
+     Thanks, but no thanks... */
+  if (dip -> at_name != NULL
+      && *dip -> at_name != '~'
+      && *dip -> at_name != '.')
+    {
+      TYPE_TAG_NAME (type) = obconcat (&objfile -> type_obstack,
+				       "", "", dip -> at_name);
+    }
+  /* Use whatever size is known.  Zero is a valid size.  We might however
+     wish to check has_at_byte_size to make sure that some byte size was
+     given explicitly, but DWARF doesn't specify that explicit sizes of
+     zero have to present, so complaining about missing sizes should 
+     probably not be the default. */
+  TYPE_LENGTH (type) = dip -> at_byte_size;
+  thisdie += dip -> die_length;
+  while (thisdie < enddie)
+    {
+      basicdieinfo (&mbr, thisdie, objfile);
+      completedieinfo (&mbr, objfile);
+      if (mbr.die_length <= SIZEOF_DIE_LENGTH)
+	{
+	  break;
+	}
+      else if (mbr.at_sibling != 0)
+	{
+	  nextdie = dbbase + mbr.at_sibling - dbroff;
+	}
+      else
+	{
+	  nextdie = thisdie + mbr.die_length;
+	}
+      switch (mbr.die_tag)
+	{
+	case TAG_member:
+	  /* Get space to record the next field's data.  */
+	  new = (struct nextfield *) alloca (sizeof (struct nextfield));
+	  new -> next = list;
+	  list = new;
+	  /* Save the data.  */
+	  list -> field.name =
+	      obsavestring (mbr.at_name, strlen (mbr.at_name),
+			    &objfile -> type_obstack);
+	  FIELD_TYPE (list->field) = decode_die_type (&mbr);
+	  FIELD_BITPOS (list->field) = 8 * locval (&mbr);
+	  /* Handle bit fields. */
+	  FIELD_BITSIZE (list->field) = mbr.at_bit_size;
+	  if (BITS_BIG_ENDIAN)
+	    {
+	      /* For big endian bits, the at_bit_offset gives the
+		 additional bit offset from the MSB of the containing
+		 anonymous object to the MSB of the field.  We don't
+		 have to do anything special since we don't need to
+		 know the size of the anonymous object. */
+	      FIELD_BITPOS (list->field) += mbr.at_bit_offset;
+	    }
+	  else
+	    {
+	      /* For little endian bits, we need to have a non-zero
+		 at_bit_size, so that we know we are in fact dealing
+		 with a bitfield.  Compute the bit offset to the MSB
+		 of the anonymous object, subtract off the number of
+		 bits from the MSB of the field to the MSB of the
+		 object, and then subtract off the number of bits of
+		 the field itself.  The result is the bit offset of
+		 the LSB of the field. */
+	      if (mbr.at_bit_size > 0)
+		{
+		  if (mbr.has_at_byte_size)
+		    {
+		      /* The size of the anonymous object containing
+			 the bit field is explicit, so use the
+			 indicated size (in bytes). */
+		      anonymous_size = mbr.at_byte_size;
+		    }
+		  else
+		    {
+		      /* The size of the anonymous object containing
+			 the bit field matches the size of an object
+			 of the bit field's type.  DWARF allows
+			 at_byte_size to be left out in such cases, as
+			 a debug information size optimization. */
+		      anonymous_size = TYPE_LENGTH (list -> field.type);
+		    }
+		  FIELD_BITPOS (list->field) +=
+		    anonymous_size * 8 - mbr.at_bit_offset - mbr.at_bit_size;
+		}
+	    }
+	  nfields++;
+	  break;
+	default:
+	  process_dies (thisdie, nextdie, objfile);
+	  break;
+	}
+      thisdie = nextdie;
+    }
+  /* Now create the vector of fields, and record how big it is.  We may
+     not even have any fields, if this DIE was generated due to a reference
+     to an anonymous structure or union.  In this case, TYPE_FLAG_STUB is
+     set, which clues gdb in to the fact that it needs to search elsewhere
+     for the full structure definition. */
+  if (nfields == 0)
+    {
+      TYPE_FLAGS (type) |= TYPE_FLAG_STUB;
+    }
+  else
+    {
+      TYPE_NFIELDS (type) = nfields;
+      TYPE_FIELDS (type) = (struct field *)
+	TYPE_ALLOC (type, sizeof (struct field) * nfields);
+      /* Copy the saved-up fields into the field vector.  */
+      for (n = nfields; list; list = list -> next)
+	{
+	  TYPE_FIELD (type, --n) = list -> field;
+	}	
+    }
+  return (type);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_structure_scope -- process all dies within struct or union
+
+SYNOPSIS
+
+	static void read_structure_scope (struct dieinfo *dip,
+		char *thisdie, char *enddie, struct objfile *objfile)
+
+DESCRIPTION
+
+	Called when we find the DIE that starts a structure or union
+	scope (definition) to process all dies that define the members
+	of the structure or union.  DIP is a pointer to the die info
+	struct for the DIE that names the structure or union.
+
+NOTES
+
+	Note that we need to call struct_type regardless of whether or not
+	the DIE has an at_name attribute, since it might be an anonymous
+	structure or union.  This gets the type entered into our set of
+	user defined types.
+
+	However, if the structure is incomplete (an opaque struct/union)
+	then suppress creating a symbol table entry for it since gdb only
+	wants to find the one with the complete definition.  Note that if
+	it is complete, we just call new_symbol, which does it's own
+	checking about whether the struct/union is anonymous or not (and
+	suppresses creating a symbol table entry itself).
+	
+ */
+
+static void
+read_structure_scope (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct symbol *sym;
+  
+  type = struct_type (dip, thisdie, enddie, objfile);
+  if (!(TYPE_FLAGS (type) & TYPE_FLAG_STUB))
+    {
+      sym = new_symbol (dip, objfile);
+      if (sym != NULL)
+	{
+	  SYMBOL_TYPE (sym) = type;
+	  if (cu_language == language_cplus)
+	    {
+	      synthesize_typedef (dip, objfile, type);
+	    }
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_array_element_type -- decode type of the array elements
+
+SYNOPSIS
+
+	static struct type *decode_array_element_type (char *scan, char *end)
+
+DESCRIPTION
+
+	As the last step in decoding the array subscript information for an
+	array DIE, we need to decode the type of the array elements.  We are
+	passed a pointer to this last part of the subscript information and
+	must return the appropriate type.  If the type attribute is not
+	recognized, just warn about the problem and return type int.
+ */
+
+static struct type *
+decode_array_element_type (scan)
+     char *scan;
+{
+  struct type *typep;
+  DIE_REF die_ref;
+  unsigned short attribute;
+  unsigned short fundtype;
+  int nbytes;
+  
+  attribute = target_to_host (scan, SIZEOF_ATTRIBUTE, GET_UNSIGNED,
+			      current_objfile);
+  scan += SIZEOF_ATTRIBUTE;
+  if ((nbytes = attribute_size (attribute)) == -1)
+    {
+      complain (&bad_array_element_type, DIE_ID, DIE_NAME, attribute);
+      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+    }
+  else
+    {
+      switch (attribute)
+	{
+	  case AT_fund_type:
+	    fundtype = target_to_host (scan, nbytes, GET_UNSIGNED,
+				       current_objfile);
+	    typep = decode_fund_type (fundtype);
+	    break;
+	  case AT_mod_fund_type:
+	    typep = decode_mod_fund_type (scan);
+	    break;
+	  case AT_user_def_type:
+	    die_ref = target_to_host (scan, nbytes, GET_UNSIGNED,
+				      current_objfile);
+	    if ((typep = lookup_utype (die_ref)) == NULL)
+	      {
+		typep = alloc_utype (die_ref, NULL);
+	      }
+	    break;
+	  case AT_mod_u_d_type:
+	    typep = decode_mod_u_d_type (scan);
+	    break;
+	  default:
+	    complain (&bad_array_element_type, DIE_ID, DIE_NAME, attribute);
+	    typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+	    break;
+	  }
+    }
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_subscript_data_item -- decode array subscript item
+
+SYNOPSIS
+
+	static struct type *
+	decode_subscript_data_item (char *scan, char *end)
+
+DESCRIPTION
+
+	The array subscripts and the data type of the elements of an
+	array are described by a list of data items, stored as a block
+	of contiguous bytes.  There is a data item describing each array
+	dimension, and a final data item describing the element type.
+	The data items are ordered the same as their appearance in the
+	source (I.E. leftmost dimension first, next to leftmost second,
+	etc).
+
+	The data items describing each array dimension consist of four
+	parts: (1) a format specifier, (2) type type of the subscript
+	index, (3) a description of the low bound of the array dimension,
+	and (4) a description of the high bound of the array dimension.
+
+	The last data item is the description of the type of each of
+	the array elements.
+
+	We are passed a pointer to the start of the block of bytes
+	containing the remaining data items, and a pointer to the first
+	byte past the data.  This function recursively decodes the
+	remaining data items and returns a type.
+
+	If we somehow fail to decode some data, we complain about it
+	and return a type "array of int".
+
+BUGS
+	FIXME:  This code only implements the forms currently used
+	by the AT&T and GNU C compilers.
+
+	The end pointer is supplied for error checking, maybe we should
+	use it for that...
+ */
+
+static struct type *
+decode_subscript_data_item (scan, end)
+     char *scan;
+     char *end;
+{
+  struct type *typep = NULL;	/* Array type we are building */
+  struct type *nexttype;	/* Type of each element (may be array) */
+  struct type *indextype;	/* Type of this index */
+  struct type *rangetype;
+  unsigned int format;
+  unsigned short fundtype;
+  unsigned long lowbound;
+  unsigned long highbound;
+  int nbytes;
+  
+  format = target_to_host (scan, SIZEOF_FORMAT_SPECIFIER, GET_UNSIGNED,
+			   current_objfile);
+  scan += SIZEOF_FORMAT_SPECIFIER;
+  switch (format)
+    {
+    case FMT_ET:
+      typep = decode_array_element_type (scan);
+      break;
+    case FMT_FT_C_C:
+      fundtype = target_to_host (scan, SIZEOF_FMT_FT, GET_UNSIGNED,
+				 current_objfile);
+      indextype = decode_fund_type (fundtype);
+      scan += SIZEOF_FMT_FT;
+      nbytes = TARGET_FT_LONG_SIZE (current_objfile);
+      lowbound = target_to_host (scan, nbytes, GET_UNSIGNED, current_objfile);
+      scan += nbytes;
+      highbound = target_to_host (scan, nbytes, GET_UNSIGNED, current_objfile);
+      scan += nbytes;
+      nexttype = decode_subscript_data_item (scan, end);
+      if (nexttype == NULL)
+	{
+	  /* Munged subscript data or other problem, fake it. */
+	  complain (&subscript_data_items, DIE_ID, DIE_NAME);
+	  nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+	}
+      rangetype = create_range_type ((struct type *) NULL, indextype,
+				      lowbound, highbound);
+      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
+      break;
+    case FMT_FT_C_X:
+    case FMT_FT_X_C:
+    case FMT_FT_X_X:
+    case FMT_UT_C_C:
+    case FMT_UT_C_X:
+    case FMT_UT_X_C:
+    case FMT_UT_X_X:
+      complain (&unhandled_array_subscript_format, DIE_ID, DIE_NAME, format);
+      nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+      rangetype = create_range_type ((struct type *) NULL, nexttype, 0, 0);
+      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
+      break;
+    default:
+      complain (&unknown_array_subscript_format, DIE_ID, DIE_NAME, format);
+      nexttype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+      rangetype = create_range_type ((struct type *) NULL, nexttype, 0, 0);
+      typep = create_array_type ((struct type *) NULL, nexttype, rangetype);
+      break;
+    }
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	dwarf_read_array_type -- read TAG_array_type DIE
+
+SYNOPSIS
+
+	static void dwarf_read_array_type (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Extract all information from a TAG_array_type DIE and add to
+	the user defined type vector.
+ */
+
+static void
+dwarf_read_array_type (dip)
+     struct dieinfo *dip;
+{
+  struct type *type;
+  struct type *utype;
+  char *sub;
+  char *subend;
+  unsigned short blocksz;
+  int nbytes;
+  
+  if (dip -> at_ordering != ORD_row_major)
+    {
+      /* FIXME:  Can gdb even handle column major arrays? */
+      complain (&not_row_major, DIE_ID, DIE_NAME);
+    }
+  if ((sub = dip -> at_subscr_data) != NULL)
+    {
+      nbytes = attribute_size (AT_subscr_data);
+      blocksz = target_to_host (sub, nbytes, GET_UNSIGNED, current_objfile);
+      subend = sub + nbytes + blocksz;
+      sub += nbytes;
+      type = decode_subscript_data_item (sub, subend);
+      if ((utype = lookup_utype (dip -> die_ref)) == NULL)
+	{
+	  /* Install user defined type that has not been referenced yet. */
+	  alloc_utype (dip -> die_ref, type);
+	}
+      else if (TYPE_CODE (utype) == TYPE_CODE_UNDEF)
+	{
+	  /* Ick!  A forward ref has already generated a blank type in our
+	     slot, and this type probably already has things pointing to it
+	     (which is what caused it to be created in the first place).
+	     If it's just a place holder we can plop our fully defined type
+	     on top of it.  We can't recover the space allocated for our
+	     new type since it might be on an obstack, but we could reuse
+	     it if we kept a list of them, but it might not be worth it
+	     (FIXME). */
+	  *utype = *type;
+	}
+      else
+	{
+	  /* Double ick!  Not only is a type already in our slot, but
+	     someone has decorated it.  Complain and leave it alone. */
+	  complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_tag_pointer_type -- read TAG_pointer_type DIE
+
+SYNOPSIS
+
+	static void read_tag_pointer_type (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Extract all information from a TAG_pointer_type DIE and add to
+	the user defined type vector.
+ */
+
+static void
+read_tag_pointer_type (dip)
+     struct dieinfo *dip;
+{
+  struct type *type;
+  struct type *utype;
+  
+  type = decode_die_type (dip);
+  if ((utype = lookup_utype (dip -> die_ref)) == NULL)
+    {
+      utype = lookup_pointer_type (type);
+      alloc_utype (dip -> die_ref, utype);
+    }
+  else
+    {
+      TYPE_TARGET_TYPE (utype) = type;
+      TYPE_POINTER_TYPE (type) = utype;
+
+      /* We assume the machine has only one representation for pointers!  */
+      /* FIXME:  Possably a poor assumption  */
+      TYPE_LENGTH (utype) = TARGET_PTR_BIT / TARGET_CHAR_BIT ;
+      TYPE_CODE (utype) = TYPE_CODE_PTR;
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_tag_string_type -- read TAG_string_type DIE
+
+SYNOPSIS
+
+	static void read_tag_string_type (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Extract all information from a TAG_string_type DIE and add to
+	the user defined type vector.  It isn't really a user defined
+	type, but it behaves like one, with other DIE's using an
+	AT_user_def_type attribute to reference it.
+ */
+
+static void
+read_tag_string_type (dip)
+     struct dieinfo *dip;
+{
+  struct type *utype;
+  struct type *indextype;
+  struct type *rangetype;
+  unsigned long lowbound = 0;
+  unsigned long highbound;
+
+  if (dip -> has_at_byte_size)
+    {
+      /* A fixed bounds string */
+      highbound = dip -> at_byte_size - 1;
+    }
+  else
+    {
+      /* A varying length string.  Stub for now.  (FIXME) */
+      highbound = 1;
+    }
+  indextype = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+  rangetype = create_range_type ((struct type *) NULL, indextype, lowbound,
+				 highbound);
+      
+  utype = lookup_utype (dip -> die_ref);
+  if (utype == NULL)
+    {
+      /* No type defined, go ahead and create a blank one to use. */
+      utype = alloc_utype (dip -> die_ref, (struct type *) NULL);
+    }
+  else
+    {
+      /* Already a type in our slot due to a forward reference. Make sure it
+	 is a blank one.  If not, complain and leave it alone. */
+      if (TYPE_CODE (utype) != TYPE_CODE_UNDEF)
+	{
+	  complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
+	  return;
+	}
+    }
+
+  /* Create the string type using the blank type we either found or created. */
+  utype = create_string_type (utype, rangetype);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_subroutine_type -- process TAG_subroutine_type dies
+
+SYNOPSIS
+
+	static void read_subroutine_type (struct dieinfo *dip, char thisdie,
+		char *enddie)
+
+DESCRIPTION
+
+	Handle DIES due to C code like:
+
+	struct foo {
+	    int (*funcp)(int a, long l);  (Generates TAG_subroutine_type DIE)
+	    int b;
+	};
+
+NOTES
+
+	The parameter DIES are currently ignored.  See if gdb has a way to
+	include this info in it's type system, and decode them if so.  Is
+	this what the type structure's "arg_types" field is for?  (FIXME)
+ */
+
+static void
+read_subroutine_type (dip, thisdie, enddie)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+{
+  struct type *type;		/* Type that this function returns */
+  struct type *ftype;		/* Function that returns above type */
+  
+  /* Decode the type that this subroutine returns */
+
+  type = decode_die_type (dip);
+
+  /* Check to see if we already have a partially constructed user
+     defined type for this DIE, from a forward reference. */
+
+  if ((ftype = lookup_utype (dip -> die_ref)) == NULL)
+    {
+      /* This is the first reference to one of these types.  Make
+	 a new one and place it in the user defined types. */
+      ftype = lookup_function_type (type);
+      alloc_utype (dip -> die_ref, ftype);
+    }
+  else if (TYPE_CODE (ftype) == TYPE_CODE_UNDEF)
+    {
+      /* We have an existing partially constructed type, so bash it
+	 into the correct type. */
+      TYPE_TARGET_TYPE (ftype) = type;
+      TYPE_LENGTH (ftype) = 1;
+      TYPE_CODE (ftype) = TYPE_CODE_FUNC;
+    }
+  else
+    {
+      complain (&dup_user_type_definition, DIE_ID, DIE_NAME);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_enumeration -- process dies which define an enumeration
+
+SYNOPSIS
+
+	static void read_enumeration (struct dieinfo *dip, char *thisdie,
+		char *enddie, struct objfile *objfile)
+
+DESCRIPTION
+
+	Given a pointer to a die which begins an enumeration, process all
+	the dies that define the members of the enumeration.
+
+NOTES
+
+	Note that we need to call enum_type regardless of whether or not we
+	have a symbol, since we might have an enum without a tag name (thus
+	no symbol for the tagname).
+ */
+
+static void
+read_enumeration (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct symbol *sym;
+  
+  type = enum_type (dip, objfile);
+  sym = new_symbol (dip, objfile);
+  if (sym != NULL)
+    {
+      SYMBOL_TYPE (sym) = type;
+      if (cu_language == language_cplus)
+	{
+	  synthesize_typedef (dip, objfile, type);
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	enum_type -- decode and return a type for an enumeration
+
+SYNOPSIS
+
+	static type *enum_type (struct dieinfo *dip, struct objfile *objfile)
+
+DESCRIPTION
+
+	Given a pointer to a die information structure for the die which
+	starts an enumeration, process all the dies that define the members
+	of the enumeration and return a type pointer for the enumeration.
+
+	At the same time, for each member of the enumeration, create a
+	symbol for it with namespace VAR_NAMESPACE and class LOC_CONST,
+	and give it the type of the enumeration itself.
+
+NOTES
+
+	Note that the DWARF specification explicitly mandates that enum
+	constants occur in reverse order from the source program order,
+	for "consistency" and because this ordering is easier for many
+	compilers to generate. (Draft 6, sec 3.8.5, Enumeration type
+	Entries).  Because gdb wants to see the enum members in program
+	source order, we have to ensure that the order gets reversed while
+	we are processing them.
+ */
+
+static struct type *
+enum_type (dip, objfile)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct nextfield {
+    struct nextfield *next;
+    struct field field;
+  };
+  struct nextfield *list = NULL;
+  struct nextfield *new;
+  int nfields = 0;
+  int n;
+  char *scan;
+  char *listend;
+  unsigned short blocksz;
+  struct symbol *sym;
+  int nbytes;
+  int unsigned_enum = 1;
+  
+  if ((type = lookup_utype (dip -> die_ref)) == NULL)
+    {
+      /* No forward references created an empty type, so install one now */
+      type = alloc_utype (dip -> die_ref, NULL);
+    }
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  /* Some compilers try to be helpful by inventing "fake" names for
+     anonymous enums, structures, and unions, like "~0fake" or ".0fake".
+     Thanks, but no thanks... */
+  if (dip -> at_name != NULL
+      && *dip -> at_name != '~'
+      && *dip -> at_name != '.')
+    {
+      TYPE_TAG_NAME (type) = obconcat (&objfile -> type_obstack,
+				       "", "", dip -> at_name);
+    }
+  if (dip -> at_byte_size != 0)
+    {
+      TYPE_LENGTH (type) = dip -> at_byte_size;
+    }
+  if ((scan = dip -> at_element_list) != NULL)
+    {
+      if (dip -> short_element_list)
+	{
+	  nbytes = attribute_size (AT_short_element_list);
+	}
+      else
+	{
+	  nbytes = attribute_size (AT_element_list);
+	}
+      blocksz = target_to_host (scan, nbytes, GET_UNSIGNED, objfile);
+      listend = scan + nbytes + blocksz;
+      scan += nbytes;
+      while (scan < listend)
+	{
+	  new = (struct nextfield *) alloca (sizeof (struct nextfield));
+	  new -> next = list;
+	  list = new;
+	  FIELD_TYPE (list->field) = NULL;
+	  FIELD_BITSIZE (list->field) = 0;
+	  FIELD_BITPOS (list->field) =
+	    target_to_host (scan, TARGET_FT_LONG_SIZE (objfile), GET_SIGNED,
+			    objfile);
+	  scan += TARGET_FT_LONG_SIZE (objfile);
+	  list -> field.name = obsavestring (scan, strlen (scan),
+					     &objfile -> type_obstack);
+	  scan += strlen (scan) + 1;
+	  nfields++;
+	  /* Handcraft a new symbol for this enum member. */
+	  sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+						 sizeof (struct symbol));
+	  memset (sym, 0, sizeof (struct symbol));
+	  SYMBOL_NAME (sym) = create_name (list -> field.name,
+					   &objfile->symbol_obstack);
+	  SYMBOL_INIT_LANGUAGE_SPECIFIC (sym, cu_language);
+	  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	  SYMBOL_CLASS (sym) = LOC_CONST;
+	  SYMBOL_TYPE (sym) = type;
+	  SYMBOL_VALUE (sym) = FIELD_BITPOS (list->field);
+	  if (SYMBOL_VALUE (sym) < 0)
+	    unsigned_enum = 0;
+	  add_symbol_to_list (sym, list_in_scope);
+	}
+      /* Now create the vector of fields, and record how big it is. This is
+	 where we reverse the order, by pulling the members off the list in
+	 reverse order from how they were inserted.  If we have no fields
+	 (this is apparently possible in C++) then skip building a field
+	 vector. */
+      if (nfields > 0)
+	{
+	  if (unsigned_enum)
+	    TYPE_FLAGS (type) |= TYPE_FLAG_UNSIGNED;
+	  TYPE_NFIELDS (type) = nfields;
+	  TYPE_FIELDS (type) = (struct field *)
+	    obstack_alloc (&objfile->symbol_obstack, sizeof (struct field) * nfields);
+	  /* Copy the saved-up fields into the field vector.  */
+	  for (n = 0; (n < nfields) && (list != NULL); list = list -> next)
+	    {
+	      TYPE_FIELD (type, n++) = list -> field;
+	    }	
+	}
+    }
+  return (type);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_func_scope -- process all dies within a function scope
+
+DESCRIPTION
+
+	Process all dies within a given function scope.  We are passed
+	a die information structure pointer DIP for the die which
+	starts the function scope, and pointers into the raw die data
+	that define the dies within the function scope.
+
+	For now, we ignore lexical block scopes within the function.
+	The problem is that AT&T cc does not define a DWARF lexical
+	block scope for the function itself, while gcc defines a
+	lexical block scope for the function.  We need to think about
+	how to handle this difference, or if it is even a problem.
+	(FIXME)
+ */
+
+static void
+read_func_scope (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+  
+  /* AT_name is absent if the function is described with an
+     AT_abstract_origin tag.
+     Ignore the function description for now to avoid GDB core dumps.
+     FIXME: Add code to handle AT_abstract_origin tags properly.  */
+  if (dip -> at_name == NULL)
+    {
+      complain (&missing_at_name, DIE_ID);
+      return;
+    }
+
+  if (objfile -> ei.entry_point >= dip -> at_low_pc &&
+      objfile -> ei.entry_point <  dip -> at_high_pc)
+    {
+      objfile -> ei.entry_func_lowpc = dip -> at_low_pc;
+      objfile -> ei.entry_func_highpc = dip -> at_high_pc;
+    }
+  if (STREQ (dip -> at_name, "main"))	/* FIXME: hardwired name */
+    {
+      objfile -> ei.main_func_lowpc = dip -> at_low_pc;
+      objfile -> ei.main_func_highpc = dip -> at_high_pc;
+    }
+  new = push_context (0, dip -> at_low_pc);
+  new -> name = new_symbol (dip, objfile);
+  list_in_scope = &local_symbols;
+  process_dies (thisdie + dip -> die_length, enddie, objfile);
+  new = pop_context ();
+  /* Make a block for the local symbols within.  */
+  finish_block (new -> name, &local_symbols, new -> old_blocks,
+		new -> start_addr, dip -> at_high_pc, objfile);
+  list_in_scope = &file_symbols;
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	handle_producer -- process the AT_producer attribute
+
+DESCRIPTION
+
+	Perform any operations that depend on finding a particular
+	AT_producer attribute.
+
+ */
+
+static void
+handle_producer (producer)
+     char *producer;
+{
+
+  /* If this compilation unit was compiled with g++ or gcc, then set the
+     processing_gcc_compilation flag. */
+
+  if (STREQN (producer, GCC_PRODUCER, strlen (GCC_PRODUCER)))
+    {
+      char version = producer[strlen (GCC_PRODUCER)];
+      processing_gcc_compilation = (version == '2' ? 2 : 1);
+    }
+  else
+    {
+      processing_gcc_compilation =
+	STREQN (producer, GPLUS_PRODUCER, strlen (GPLUS_PRODUCER))
+	|| STREQN (producer, CHILL_PRODUCER, strlen (CHILL_PRODUCER));
+    }
+
+  /* Select a demangling style if we can identify the producer and if
+     the current style is auto.  We leave the current style alone if it
+     is not auto.  We also leave the demangling style alone if we find a
+     gcc (cc1) producer, as opposed to a g++ (cc1plus) producer. */
+
+  if (AUTO_DEMANGLING)
+    {
+      if (STREQN (producer, GPLUS_PRODUCER, strlen (GPLUS_PRODUCER)))
+	{
+	  set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+	}
+      else if (STREQN (producer, LCC_PRODUCER, strlen (LCC_PRODUCER)))
+	{
+	  set_demangling_style (LUCID_DEMANGLING_STYLE_STRING);
+	}
+    }
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	read_file_scope -- process all dies within a file scope
+
+DESCRIPTION
+
+	Process all dies within a given file scope.  We are passed a
+	pointer to the die information structure for the die which
+	starts the file scope, and pointers into the raw die data which
+	mark the range of dies within the file scope.
+
+	When the partial symbol table is built, the file offset for the line
+	number table for each compilation unit is saved in the partial symbol
+	table entry for that compilation unit.  As the symbols for each
+	compilation unit are read, the line number table is read into memory
+	and the variable lnbase is set to point to it.  Thus all we have to
+	do is use lnbase to access the line number table for the current
+	compilation unit.
+ */
+
+static void
+read_file_scope (dip, thisdie, enddie, objfile)
+     struct dieinfo *dip;
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  struct cleanup *back_to;
+  struct symtab *symtab;
+  
+  if (objfile -> ei.entry_point >= dip -> at_low_pc &&
+      objfile -> ei.entry_point <  dip -> at_high_pc)
+    {
+      objfile -> ei.entry_file_lowpc = dip -> at_low_pc;
+      objfile -> ei.entry_file_highpc = dip -> at_high_pc;
+    }
+  set_cu_language (dip);
+  if (dip -> at_producer != NULL)
+    {
+      handle_producer (dip -> at_producer);
+    }
+  numutypes = (enddie - thisdie) / 4;
+  utypes = (struct type **) xmalloc (numutypes * sizeof (struct type *));
+  back_to = make_cleanup (free_utypes, NULL);
+  memset (utypes, 0, numutypes * sizeof (struct type *));
+  memset (ftypes, 0, FT_NUM_MEMBERS * sizeof (struct type *));
+  start_symtab (dip -> at_name, dip -> at_comp_dir, dip -> at_low_pc);
+  record_debugformat ("DWARF 1");
+  decode_line_numbers (lnbase);
+  process_dies (thisdie + dip -> die_length, enddie, objfile);
+
+  symtab = end_symtab (dip -> at_high_pc, objfile, 0);
+  if (symtab != NULL)
+    {
+      symtab -> language = cu_language;
+    }      
+  do_cleanups (back_to);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	process_dies -- process a range of DWARF Information Entries
+
+SYNOPSIS
+
+	static void process_dies (char *thisdie, char *enddie,
+				  struct objfile *objfile)
+
+DESCRIPTION
+
+	Process all DIE's in a specified range.  May be (and almost
+	certainly will be) called recursively.
+ */
+
+static void
+process_dies (thisdie, enddie, objfile)
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  char *nextdie;
+  struct dieinfo di;
+  
+  while (thisdie < enddie)
+    {
+      basicdieinfo (&di, thisdie, objfile);
+      if (di.die_length < SIZEOF_DIE_LENGTH)
+	{
+	  break;
+	}
+      else if (di.die_tag == TAG_padding)
+	{
+	  nextdie = thisdie + di.die_length;
+	}
+      else
+	{
+	  completedieinfo (&di, objfile);
+	  if (di.at_sibling != 0)
+	    {
+	      nextdie = dbbase + di.at_sibling - dbroff;
+	    }
+	  else
+	    {
+	      nextdie = thisdie + di.die_length;
+	    }
+#ifdef SMASH_TEXT_ADDRESS
+	  /* I think that these are always text, not data, addresses.  */
+	  SMASH_TEXT_ADDRESS (di.at_low_pc);
+	  SMASH_TEXT_ADDRESS (di.at_high_pc);
+#endif
+	  switch (di.die_tag)
+	    {
+	    case TAG_compile_unit:
+	      /* Skip Tag_compile_unit if we are already inside a compilation
+		 unit, we are unable to handle nested compilation units
+		 properly (FIXME).  */
+	      if (current_subfile == NULL)
+		read_file_scope (&di, thisdie, nextdie, objfile);
+	      else
+		nextdie = thisdie + di.die_length;
+	      break;
+	    case TAG_global_subroutine:
+	    case TAG_subroutine:
+	      if (di.has_at_low_pc)
+		{
+		  read_func_scope (&di, thisdie, nextdie, objfile);
+		}
+	      break;
+	    case TAG_lexical_block:
+	      read_lexical_block_scope (&di, thisdie, nextdie, objfile);
+	      break;
+	    case TAG_class_type:
+	    case TAG_structure_type:
+	    case TAG_union_type:
+	      read_structure_scope (&di, thisdie, nextdie, objfile);
+	      break;
+	    case TAG_enumeration_type:
+	      read_enumeration (&di, thisdie, nextdie, objfile);
+	      break;
+	    case TAG_subroutine_type:
+	      read_subroutine_type (&di, thisdie, nextdie);
+	      break;
+	    case TAG_array_type:
+	      dwarf_read_array_type (&di);
+	      break;
+	    case TAG_pointer_type:
+	      read_tag_pointer_type (&di);
+	      break;
+	    case TAG_string_type:
+	      read_tag_string_type (&di);
+	      break;
+	    default:
+	      new_symbol (&di, objfile);
+	      break;
+	    }
+	}
+      thisdie = nextdie;
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_line_numbers -- decode a line number table fragment
+
+SYNOPSIS
+
+	static void decode_line_numbers (char *tblscan, char *tblend,
+		long length, long base, long line, long pc)
+
+DESCRIPTION
+
+	Translate the DWARF line number information to gdb form.
+
+	The ".line" section contains one or more line number tables, one for
+	each ".line" section from the objects that were linked.
+
+	The AT_stmt_list attribute for each TAG_source_file entry in the
+	".debug" section contains the offset into the ".line" section for the
+	start of the table for that file.
+
+	The table itself has the following structure:
+
+	<table length><base address><source statement entry>
+	4 bytes       4 bytes       10 bytes
+
+	The table length is the total size of the table, including the 4 bytes
+	for the length information.
+
+	The base address is the address of the first instruction generated
+	for the source file.
+
+	Each source statement entry has the following structure:
+
+	<line number><statement position><address delta>
+	4 bytes      2 bytes             4 bytes
+
+	The line number is relative to the start of the file, starting with
+	line 1.
+
+	The statement position either -1 (0xFFFF) or the number of characters
+	from the beginning of the line to the beginning of the statement.
+
+	The address delta is the difference between the base address and
+	the address of the first instruction for the statement.
+
+	Note that we must copy the bytes from the packed table to our local
+	variables before attempting to use them, to avoid alignment problems
+	on some machines, particularly RISC processors.
+
+BUGS
+
+	Does gdb expect the line numbers to be sorted?  They are now by
+	chance/luck, but are not required to be.  (FIXME)
+
+	The line with number 0 is unused, gdb apparently can discover the
+	span of the last line some other way. How?  (FIXME)
+ */
+
+static void
+decode_line_numbers (linetable)
+     char *linetable;
+{
+  char *tblscan;
+  char *tblend;
+  unsigned long length;
+  unsigned long base;
+  unsigned long line;
+  unsigned long pc;
+  
+  if (linetable != NULL)
+    {
+      tblscan = tblend = linetable;
+      length = target_to_host (tblscan, SIZEOF_LINETBL_LENGTH, GET_UNSIGNED,
+			       current_objfile);
+      tblscan += SIZEOF_LINETBL_LENGTH;
+      tblend += length;
+      base = target_to_host (tblscan, TARGET_FT_POINTER_SIZE (objfile),
+			     GET_UNSIGNED, current_objfile);
+      tblscan += TARGET_FT_POINTER_SIZE (objfile);
+      base += baseaddr;
+      while (tblscan < tblend)
+	{
+	  line = target_to_host (tblscan, SIZEOF_LINETBL_LINENO, GET_UNSIGNED,
+				 current_objfile);
+	  tblscan += SIZEOF_LINETBL_LINENO + SIZEOF_LINETBL_STMT;
+	  pc = target_to_host (tblscan, SIZEOF_LINETBL_DELTA, GET_UNSIGNED,
+			       current_objfile);
+	  tblscan += SIZEOF_LINETBL_DELTA;
+	  pc += base;
+	  if (line != 0)
+	    {
+	      record_line (current_subfile, line, pc);
+	    }
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	locval -- compute the value of a location attribute
+
+SYNOPSIS
+
+	static int locval (struct dieinfo *dip)
+
+DESCRIPTION
+
+	Given pointer to a string of bytes that define a location, compute
+	the location and return the value.
+	A location description containing no atoms indicates that the
+	object is optimized out. The optimized_out flag is set for those,
+	the return value is meaningless.
+
+	When computing values involving the current value of the frame pointer,
+	the value zero is used, which results in a value relative to the frame
+	pointer, rather than the absolute value.  This is what GDB wants
+	anyway.
+    
+	When the result is a register number, the isreg flag is set, otherwise
+	it is cleared.  This is a kludge until we figure out a better
+	way to handle the problem.  Gdb's design does not mesh well with the
+	DWARF notion of a location computing interpreter, which is a shame
+	because the flexibility goes unused.
+
+NOTES
+
+	Note that stack[0] is unused except as a default error return.
+	Note that stack overflow is not yet handled.
+ */
+
+static int
+locval (dip)
+     struct dieinfo *dip;
+{
+  unsigned short nbytes;
+  unsigned short locsize;
+  auto long stack[64];
+  int stacki;
+  char *loc;
+  char *end;
+  int loc_atom_code;
+  int loc_value_size;
+  
+  loc = dip -> at_location;
+  nbytes = attribute_size (AT_location);
+  locsize = target_to_host (loc, nbytes, GET_UNSIGNED, current_objfile);
+  loc += nbytes;
+  end = loc + locsize;
+  stacki = 0;
+  stack[stacki] = 0;
+  dip -> isreg = 0;
+  dip -> offreg = 0;
+  dip -> optimized_out = 1;
+  loc_value_size = TARGET_FT_LONG_SIZE (current_objfile);
+  while (loc < end)
+    {
+      dip -> optimized_out = 0;
+      loc_atom_code = target_to_host (loc, SIZEOF_LOC_ATOM_CODE, GET_UNSIGNED,
+				      current_objfile);
+      loc += SIZEOF_LOC_ATOM_CODE;
+      switch (loc_atom_code)
+	{
+	  case 0:
+	    /* error */
+	    loc = end;
+	    break;
+	  case OP_REG:
+	    /* push register (number) */
+	    stack[++stacki]
+	      = DWARF_REG_TO_REGNUM (target_to_host (loc, loc_value_size,
+						     GET_UNSIGNED,
+						     current_objfile));
+	    loc += loc_value_size;
+	    dip -> isreg = 1;
+	    break;
+	  case OP_BASEREG:
+	    /* push value of register (number) */
+	    /* Actually, we compute the value as if register has 0, so the
+	       value ends up being the offset from that register.  */
+	    dip -> offreg = 1;
+	    dip -> basereg = target_to_host (loc, loc_value_size, GET_UNSIGNED,
+					     current_objfile);
+	    loc += loc_value_size;
+	    stack[++stacki] = 0;
+	    break;
+	  case OP_ADDR:
+	    /* push address (relocated address) */
+	    stack[++stacki] = target_to_host (loc, loc_value_size,
+					      GET_UNSIGNED, current_objfile);
+	    loc += loc_value_size;
+	    break;
+	  case OP_CONST:
+	    /* push constant (number)   FIXME: signed or unsigned! */
+	    stack[++stacki] = target_to_host (loc, loc_value_size,
+					      GET_SIGNED, current_objfile);
+	    loc += loc_value_size;
+	    break;
+	  case OP_DEREF2:
+	    /* pop, deref and push 2 bytes (as a long) */
+	    complain (&op_deref2, DIE_ID, DIE_NAME, stack[stacki]);
+	    break;
+	  case OP_DEREF4:	/* pop, deref and push 4 bytes (as a long) */
+	    complain (&op_deref4, DIE_ID, DIE_NAME, stack[stacki]);
+	    break;
+	  case OP_ADD:	/* pop top 2 items, add, push result */
+	    stack[stacki - 1] += stack[stacki];
+	    stacki--;
+	    break;
+	}
+    }
+  return (stack[stacki]);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	read_ofile_symtab -- build a full symtab entry from chunk of DIE's
+
+SYNOPSIS
+
+	static void read_ofile_symtab (struct partial_symtab *pst)
+
+DESCRIPTION
+
+	When expanding a partial symbol table entry to a full symbol table
+	entry, this is the function that gets called to read in the symbols
+	for the compilation unit.  A pointer to the newly constructed symtab,
+	which is now the new first one on the objfile's symtab list, is
+	stashed in the partial symbol table entry.
+ */
+
+static void
+read_ofile_symtab (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *back_to;
+  unsigned long lnsize;
+  file_ptr foffset;
+  bfd *abfd;
+  char lnsizedata[SIZEOF_LINETBL_LENGTH];
+
+  abfd = pst -> objfile -> obfd;
+  current_objfile = pst -> objfile;
+
+  /* Allocate a buffer for the entire chunk of DIE's for this compilation
+     unit, seek to the location in the file, and read in all the DIE's. */
+
+  diecount = 0;
+  dbsize = DBLENGTH (pst);
+  dbbase = xmalloc (dbsize);
+  dbroff = DBROFF(pst);
+  foffset = DBFOFF(pst) + dbroff;
+  base_section_offsets = pst->section_offsets;
+  baseaddr = ANOFFSET (pst->section_offsets, 0);
+  if (bfd_seek (abfd, foffset, SEEK_SET) ||
+      (bfd_read (dbbase, dbsize, 1, abfd) != dbsize))
+    {
+      free (dbbase);
+      error ("can't read DWARF data");
+    }
+  back_to = make_cleanup (free, dbbase);
+
+  /* If there is a line number table associated with this compilation unit
+     then read the size of this fragment in bytes, from the fragment itself.
+     Allocate a buffer for the fragment and read it in for future 
+     processing. */
+
+  lnbase = NULL;
+  if (LNFOFF (pst))
+    {
+      if (bfd_seek (abfd, LNFOFF (pst), SEEK_SET) ||
+	  (bfd_read ((PTR) lnsizedata, sizeof (lnsizedata), 1, abfd) !=
+	   sizeof (lnsizedata)))
+	{
+	  error ("can't read DWARF line number table size");
+	}
+      lnsize = target_to_host (lnsizedata, SIZEOF_LINETBL_LENGTH,
+			       GET_UNSIGNED, pst -> objfile);
+      lnbase = xmalloc (lnsize);
+      if (bfd_seek (abfd, LNFOFF (pst), SEEK_SET) ||
+	  (bfd_read (lnbase, lnsize, 1, abfd) != lnsize))
+	{
+	  free (lnbase);
+	  error ("can't read DWARF line numbers");
+	}
+      make_cleanup (free, lnbase);
+    }
+
+  process_dies (dbbase, dbbase + dbsize, pst -> objfile);
+  do_cleanups (back_to);
+  current_objfile = NULL;
+  pst -> symtab = pst -> objfile -> symtabs;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	psymtab_to_symtab_1 -- do grunt work for building a full symtab entry
+
+SYNOPSIS
+
+	static void psymtab_to_symtab_1 (struct partial_symtab *pst)
+
+DESCRIPTION
+
+	Called once for each partial symbol table entry that needs to be
+	expanded into a full symbol table entry.
+
+*/
+
+static void
+psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  int i;
+  struct cleanup *old_chain;
+  
+  if (pst != NULL)
+    {
+      if (pst->readin)
+	{
+	  warning ("psymtab for %s already read in.  Shouldn't happen.",
+		   pst -> filename);
+	}
+      else
+	{
+	  /* Read in all partial symtabs on which this one is dependent */
+	  for (i = 0; i < pst -> number_of_dependencies; i++)
+	    {
+	      if (!pst -> dependencies[i] -> readin)
+		{
+		  /* Inform about additional files that need to be read in. */
+		  if (info_verbose)
+		    {
+		      fputs_filtered (" ", gdb_stdout);
+		      wrap_here ("");
+		      fputs_filtered ("and ", gdb_stdout);
+		      wrap_here ("");
+		      printf_filtered ("%s...",
+				       pst -> dependencies[i] -> filename);
+		      wrap_here ("");
+		      gdb_flush (gdb_stdout);		/* Flush output */
+		    }
+		  psymtab_to_symtab_1 (pst -> dependencies[i]);
+		}
+	    }	  
+	  if (DBLENGTH (pst))		/* Otherwise it's a dummy */
+	    {
+	      buildsym_init ();
+	      old_chain = make_cleanup ((make_cleanup_func) 
+                                        really_free_pendings, 0);
+	      read_ofile_symtab (pst);
+	      if (info_verbose)
+		{
+		  printf_filtered ("%d DIE's, sorting...", diecount);
+		  wrap_here ("");
+		  gdb_flush (gdb_stdout);
+		}
+	      sort_symtab_syms (pst -> symtab);
+	      do_cleanups (old_chain);
+	    }
+	  pst -> readin = 1;
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	dwarf_psymtab_to_symtab -- build a full symtab entry from partial one
+
+SYNOPSIS
+
+	static void dwarf_psymtab_to_symtab (struct partial_symtab *pst)
+
+DESCRIPTION
+
+	This is the DWARF support entry point for building a full symbol
+	table entry from a partial symbol table entry.  We are passed a
+	pointer to the partial symbol table entry that needs to be expanded.
+
+*/
+
+static void
+dwarf_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+
+  if (pst != NULL)
+    {
+      if (pst -> readin)
+	{
+	  warning ("psymtab for %s already read in.  Shouldn't happen.",
+		   pst -> filename);
+	}
+      else
+	{
+	  if (DBLENGTH (pst) || pst -> number_of_dependencies)
+	    {
+	      /* Print the message now, before starting serious work, to avoid
+		 disconcerting pauses.  */
+	      if (info_verbose)
+		{
+		  printf_filtered ("Reading in symbols for %s...",
+				   pst -> filename);
+		  gdb_flush (gdb_stdout);
+		}
+	      
+	      psymtab_to_symtab_1 (pst);
+	      
+#if 0	      /* FIXME:  Check to see what dbxread is doing here and see if
+		 we need to do an equivalent or is this something peculiar to
+		 stabs/a.out format.
+		 Match with global symbols.  This only needs to be done once,
+		 after all of the symtabs and dependencies have been read in.
+		 */
+	      scan_file_globals (pst -> objfile);
+#endif
+	      
+	      /* Finish up the verbose info message.  */
+	      if (info_verbose)
+		{
+		  printf_filtered ("done.\n");
+		  gdb_flush (gdb_stdout);
+		}
+	    }
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	add_enum_psymbol -- add enumeration members to partial symbol table
+
+DESCRIPTION
+
+	Given pointer to a DIE that is known to be for an enumeration,
+	extract the symbolic names of the enumeration members and add
+	partial symbols for them.
+*/
+
+static void
+add_enum_psymbol (dip, objfile)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+{
+  char *scan;
+  char *listend;
+  unsigned short blocksz;
+  int nbytes;
+  
+  if ((scan = dip -> at_element_list) != NULL)
+    {
+      if (dip -> short_element_list)
+	{
+	  nbytes = attribute_size (AT_short_element_list);
+	}
+      else
+	{
+	  nbytes = attribute_size (AT_element_list);
+	}
+      blocksz = target_to_host (scan, nbytes, GET_UNSIGNED, objfile);
+      scan += nbytes;
+      listend = scan + blocksz;
+      while (scan < listend)
+	{
+	  scan += TARGET_FT_LONG_SIZE (objfile);
+	  add_psymbol_to_list (scan, strlen (scan), VAR_NAMESPACE, LOC_CONST,
+			       &objfile -> static_psymbols, 0, 0, cu_language,
+			       objfile);
+	  scan += strlen (scan) + 1;
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	add_partial_symbol -- add symbol to partial symbol table
+
+DESCRIPTION
+
+	Given a DIE, if it is one of the types that we want to
+	add to a partial symbol table, finish filling in the die info
+	and then add a partial symbol table entry for it.
+
+NOTES
+
+	The caller must ensure that the DIE has a valid name attribute.
+*/
+
+static void
+add_partial_symbol (dip, objfile)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+{
+  switch (dip -> die_tag)
+    {
+    case TAG_global_subroutine:
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+				VAR_NAMESPACE, LOC_BLOCK,
+				&objfile -> global_psymbols,
+				0, dip -> at_low_pc, cu_language, objfile);
+      break;
+    case TAG_global_variable:
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+			   VAR_NAMESPACE, LOC_STATIC,
+			   &objfile -> global_psymbols,
+			   0, 0, cu_language, objfile);
+      break;
+    case TAG_subroutine:
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+				VAR_NAMESPACE, LOC_BLOCK,
+				&objfile -> static_psymbols,
+				0, dip -> at_low_pc, cu_language, objfile);
+      break;
+    case TAG_local_variable:
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+			   VAR_NAMESPACE, LOC_STATIC,
+			   &objfile -> static_psymbols,
+			   0, 0, cu_language, objfile);
+      break;
+    case TAG_typedef:
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+			   VAR_NAMESPACE, LOC_TYPEDEF,
+			   &objfile -> static_psymbols,
+			   0, 0, cu_language, objfile);
+      break;
+    case TAG_class_type:
+    case TAG_structure_type:
+    case TAG_union_type:
+    case TAG_enumeration_type:
+      /* Do not add opaque aggregate definitions to the psymtab.  */
+      if (!dip -> has_at_byte_size)
+	break;
+      add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+			   STRUCT_NAMESPACE, LOC_TYPEDEF,
+			   &objfile -> static_psymbols,
+			   0, 0, cu_language, objfile);
+      if (cu_language == language_cplus)
+	{
+	  /* For C++, these implicitly act as typedefs as well. */
+	  add_psymbol_to_list (dip -> at_name, strlen (dip -> at_name),
+			       VAR_NAMESPACE, LOC_TYPEDEF,
+			       &objfile -> static_psymbols,
+			       0, 0, cu_language, objfile);
+	}
+      break;
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	scan_partial_symbols -- scan DIE's within a single compilation unit
+
+DESCRIPTION
+
+	Process the DIE's within a single compilation unit, looking for
+	interesting DIE's that contribute to the partial symbol table entry
+	for this compilation unit.
+
+NOTES
+
+	There are some DIE's that may appear both at file scope and within
+	the scope of a function.  We are only interested in the ones at file
+	scope, and the only way to tell them apart is to keep track of the
+	scope.  For example, consider the test case:
+
+		static int i;
+		main () { int j; }
+
+	for which the relevant DWARF segment has the structure:
+	
+		0x51:
+		0x23   global subrtn   sibling     0x9b
+		                       name        main
+		                       fund_type   FT_integer
+		                       low_pc      0x800004cc
+		                       high_pc     0x800004d4
+		                            
+		0x74:
+		0x23   local var       sibling     0x97
+		                       name        j
+		                       fund_type   FT_integer
+		                       location    OP_BASEREG 0xe
+		                                   OP_CONST 0xfffffffc
+		                                   OP_ADD
+		0x97:
+		0x4         
+		
+		0x9b:
+		0x1d   local var       sibling     0xb8
+		                       name        i
+		                       fund_type   FT_integer
+		                       location    OP_ADDR 0x800025dc
+		                            
+		0xb8:
+		0x4         
+
+	We want to include the symbol 'i' in the partial symbol table, but
+	not the symbol 'j'.  In essence, we want to skip all the dies within
+	the scope of a TAG_global_subroutine DIE.
+
+	Don't attempt to add anonymous structures or unions since they have
+	no name.  Anonymous enumerations however are processed, because we
+	want to extract their member names (the check for a tag name is
+	done later).
+
+	Also, for variables and subroutines, check that this is the place
+	where the actual definition occurs, rather than just a reference
+	to an external.
+ */
+
+static void
+scan_partial_symbols (thisdie, enddie, objfile)
+     char *thisdie;
+     char *enddie;
+     struct objfile *objfile;
+{
+  char *nextdie;
+  char *temp;
+  struct dieinfo di;
+  
+  while (thisdie < enddie)
+    {
+      basicdieinfo (&di, thisdie, objfile);
+      if (di.die_length < SIZEOF_DIE_LENGTH)
+	{
+	  break;
+	}
+      else
+	{
+	  nextdie = thisdie + di.die_length;
+	  /* To avoid getting complete die information for every die, we
+	     only do it (below) for the cases we are interested in. */
+	  switch (di.die_tag)
+	    {
+	    case TAG_global_subroutine:
+	    case TAG_subroutine:
+	      completedieinfo (&di, objfile);
+	      if (di.at_name && (di.has_at_low_pc || di.at_location))
+		{
+		  add_partial_symbol (&di, objfile);
+		  /* If there is a sibling attribute, adjust the nextdie
+		     pointer to skip the entire scope of the subroutine.
+		     Apply some sanity checking to make sure we don't 
+		     overrun or underrun the range of remaining DIE's */
+		  if (di.at_sibling != 0)
+		    {
+		      temp = dbbase + di.at_sibling - dbroff;
+		      if ((temp < thisdie) || (temp >= enddie))
+			{
+			  complain (&bad_die_ref, DIE_ID, DIE_NAME,
+				    di.at_sibling);
+			}
+		      else
+			{
+			  nextdie = temp;
+			}
+		    }
+		}
+	      break;
+	    case TAG_global_variable:
+	    case TAG_local_variable:
+	      completedieinfo (&di, objfile);
+	      if (di.at_name && (di.has_at_low_pc || di.at_location))
+		{
+		  add_partial_symbol (&di, objfile);
+		}
+	      break;
+	    case TAG_typedef:
+	    case TAG_class_type:
+	    case TAG_structure_type:
+	    case TAG_union_type:
+	      completedieinfo (&di, objfile);
+	      if (di.at_name)
+		{
+		  add_partial_symbol (&di, objfile);
+		}
+	      break;
+	    case TAG_enumeration_type:
+	      completedieinfo (&di, objfile);
+	      if (di.at_name)
+		{
+		  add_partial_symbol (&di, objfile);
+		}
+	      add_enum_psymbol (&di, objfile);
+	      break;
+	    }
+	}
+      thisdie = nextdie;
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	scan_compilation_units -- build a psymtab entry for each compilation
+
+DESCRIPTION
+
+	This is the top level dwarf parsing routine for building partial
+	symbol tables.
+
+	It scans from the beginning of the DWARF table looking for the first
+	TAG_compile_unit DIE, and then follows the sibling chain to locate
+	each additional TAG_compile_unit DIE.
+   
+	For each TAG_compile_unit DIE it creates a partial symtab structure,
+	calls a subordinate routine to collect all the compilation unit's
+	global DIE's, file scope DIEs, typedef DIEs, etc, and then links the
+	new partial symtab structure into the partial symbol table.  It also
+	records the appropriate information in the partial symbol table entry
+	to allow the chunk of DIE's and line number table for this compilation
+	unit to be located and re-read later, to generate a complete symbol
+	table entry for the compilation unit.
+
+	Thus it effectively partitions up a chunk of DIE's for multiple
+	compilation units into smaller DIE chunks and line number tables,
+	and associates them with a partial symbol table entry.
+
+NOTES
+
+	If any compilation unit has no line number table associated with
+	it for some reason (a missing at_stmt_list attribute, rather than
+	just one with a value of zero, which is valid) then we ensure that
+	the recorded file offset is zero so that the routine which later
+	reads line number table fragments knows that there is no fragment
+	to read.
+
+RETURNS
+
+	Returns no value.
+
+ */
+
+static void
+scan_compilation_units (thisdie, enddie, dbfoff, lnoffset, objfile)
+     char *thisdie;
+     char *enddie;
+     file_ptr dbfoff;
+     file_ptr lnoffset;
+     struct objfile *objfile;
+{
+  char *nextdie;
+  struct dieinfo di;
+  struct partial_symtab *pst;
+  int culength;
+  int curoff;
+  file_ptr curlnoffset;
+
+  while (thisdie < enddie)
+    {
+      basicdieinfo (&di, thisdie, objfile);
+      if (di.die_length < SIZEOF_DIE_LENGTH)
+	{
+	  break;
+	}
+      else if (di.die_tag != TAG_compile_unit)
+	{
+	  nextdie = thisdie + di.die_length;
+	}
+      else
+	{
+	  completedieinfo (&di, objfile);
+	  set_cu_language (&di);
+	  if (di.at_sibling != 0)
+	    {
+	      nextdie = dbbase + di.at_sibling - dbroff;
+	    }
+	  else
+	    {
+	      nextdie = thisdie + di.die_length;
+	    }
+	  curoff = thisdie - dbbase;
+	  culength = nextdie - thisdie;
+	  curlnoffset = di.has_at_stmt_list ? lnoffset + di.at_stmt_list : 0;
+
+	  /* First allocate a new partial symbol table structure */
+
+	  pst = start_psymtab_common (objfile, base_section_offsets,
+				      di.at_name, di.at_low_pc,
+				      objfile -> global_psymbols.next,
+				      objfile -> static_psymbols.next);
+
+	  pst -> texthigh = di.at_high_pc;
+	  pst -> read_symtab_private = (char *)
+	      obstack_alloc (&objfile -> psymbol_obstack,
+			     sizeof (struct dwfinfo));
+	  DBFOFF (pst) = dbfoff;
+	  DBROFF (pst) = curoff;
+	  DBLENGTH (pst) = culength;
+	  LNFOFF (pst)  = curlnoffset;
+	  pst -> read_symtab = dwarf_psymtab_to_symtab;
+
+	  /* Now look for partial symbols */
+
+	  scan_partial_symbols (thisdie + di.die_length, nextdie, objfile);
+
+	  pst -> n_global_syms = objfile -> global_psymbols.next -
+	    (objfile -> global_psymbols.list + pst -> globals_offset);
+	  pst -> n_static_syms = objfile -> static_psymbols.next - 
+	    (objfile -> static_psymbols.list + pst -> statics_offset);
+	  sort_pst_symbols (pst);
+	  /* If there is already a psymtab or symtab for a file of this name,
+	     remove it. (If there is a symtab, more drastic things also
+	     happen.)  This happens in VxWorks.  */
+	  free_named_symtabs (pst -> filename);
+	}
+      thisdie = nextdie;      
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	new_symbol -- make a symbol table entry for a new symbol
+
+SYNOPSIS
+
+	static struct symbol *new_symbol (struct dieinfo *dip,
+					  struct objfile *objfile)
+
+DESCRIPTION
+
+	Given a pointer to a DWARF information entry, figure out if we need
+	to make a symbol table entry for it, and if so, create a new entry
+	and return a pointer to it.
+ */
+
+static struct symbol *
+new_symbol (dip, objfile)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+{
+  struct symbol *sym = NULL;
+  
+  if (dip -> at_name != NULL)
+    {
+      sym = (struct symbol *) obstack_alloc (&objfile -> symbol_obstack,
+					     sizeof (struct symbol));
+      OBJSTAT (objfile, n_syms++);
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = create_name (dip -> at_name,
+				       &objfile->symbol_obstack);
+      /* default assumptions */
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      SYMBOL_TYPE (sym) = decode_die_type (dip);
+
+      /* If this symbol is from a C++ compilation, then attempt to cache the
+	 demangled form for future reference.  This is a typical time versus
+	 space tradeoff, that was decided in favor of time because it sped up
+	 C++ symbol lookups by a factor of about 20. */
+
+      SYMBOL_LANGUAGE (sym) = cu_language;
+      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile -> symbol_obstack);
+      switch (dip -> die_tag)
+	{
+	case TAG_label:
+	  SYMBOL_VALUE_ADDRESS (sym) = dip -> at_low_pc;
+	  SYMBOL_CLASS (sym) = LOC_LABEL;
+	  break;
+	case TAG_global_subroutine:
+	case TAG_subroutine:
+	  SYMBOL_VALUE_ADDRESS (sym) = dip -> at_low_pc;
+	  SYMBOL_TYPE (sym) = lookup_function_type (SYMBOL_TYPE (sym));
+	  if (dip -> at_prototyped)
+	    TYPE_FLAGS (SYMBOL_TYPE (sym)) |= TYPE_FLAG_PROTOTYPED;
+	  SYMBOL_CLASS (sym) = LOC_BLOCK;
+	  if (dip -> die_tag == TAG_global_subroutine)
+	    {
+	      add_symbol_to_list (sym, &global_symbols);
+	    }
+	  else
+	    {
+	      add_symbol_to_list (sym, list_in_scope);
+	    }
+	  break;
+	case TAG_global_variable:
+	  if (dip -> at_location != NULL)
+	    {
+	      SYMBOL_VALUE_ADDRESS (sym) = locval (dip);
+	      add_symbol_to_list (sym, &global_symbols);
+	      SYMBOL_CLASS (sym) = LOC_STATIC;
+	      SYMBOL_VALUE (sym) += baseaddr;
+	    }
+	  break;
+	case TAG_local_variable:
+	  if (dip -> at_location != NULL)
+	    {
+	      int loc = locval (dip);
+	      if (dip -> optimized_out)
+		{
+		  SYMBOL_CLASS (sym) = LOC_OPTIMIZED_OUT;
+		}
+	      else if (dip -> isreg)
+		{
+		  SYMBOL_CLASS (sym) = LOC_REGISTER;
+		}
+	      else if (dip -> offreg)
+		{
+		  SYMBOL_CLASS (sym) = LOC_BASEREG;
+		  SYMBOL_BASEREG (sym) = dip -> basereg;
+		}
+	      else
+		{
+		  SYMBOL_CLASS (sym) = LOC_STATIC;
+		  SYMBOL_VALUE (sym) += baseaddr;
+		}
+	      if (SYMBOL_CLASS (sym) == LOC_STATIC)
+		{
+		  /* LOC_STATIC address class MUST use SYMBOL_VALUE_ADDRESS,
+		     which may store to a bigger location than SYMBOL_VALUE. */
+		  SYMBOL_VALUE_ADDRESS (sym) = loc;
+		}
+	      else
+		{
+		  SYMBOL_VALUE (sym) = loc;
+		}
+	      add_symbol_to_list (sym, list_in_scope);
+	    }
+	  break;
+	case TAG_formal_parameter:
+	  if (dip -> at_location != NULL)
+	    {
+	      SYMBOL_VALUE (sym) = locval (dip);
+	    }
+	  add_symbol_to_list (sym, list_in_scope);
+	  if (dip -> isreg)
+	    {
+	      SYMBOL_CLASS (sym) = LOC_REGPARM;
+	    }
+	  else if (dip -> offreg)
+	    {
+	      SYMBOL_CLASS (sym) = LOC_BASEREG_ARG;
+	      SYMBOL_BASEREG (sym) = dip -> basereg;
+	    }
+	  else
+	    {
+	      SYMBOL_CLASS (sym) = LOC_ARG;
+	    }
+	  break;
+	case TAG_unspecified_parameters:
+	  /* From varargs functions; gdb doesn't seem to have any interest in
+	     this information, so just ignore it for now. (FIXME?) */
+	  break;
+	case TAG_class_type:
+	case TAG_structure_type:
+	case TAG_union_type:
+	case TAG_enumeration_type:
+	  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	  SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+	  add_symbol_to_list (sym, list_in_scope);
+	  break;
+	case TAG_typedef:
+	  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+	  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	  add_symbol_to_list (sym, list_in_scope);
+	  break;
+	default:
+	  /* Not a tag we recognize.  Hopefully we aren't processing trash
+	     data, but since we must specifically ignore things we don't
+	     recognize, there is nothing else we should do at this point. */
+	  break;
+	}
+    }
+  return (sym);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	synthesize_typedef -- make a symbol table entry for a "fake" typedef
+
+SYNOPSIS
+
+	static void synthesize_typedef (struct dieinfo *dip,
+					struct objfile *objfile,
+					struct type *type);
+
+DESCRIPTION
+
+	Given a pointer to a DWARF information entry, synthesize a typedef
+	for the name in the DIE, using the specified type.
+
+	This is used for C++ class, structs, unions, and enumerations to
+	set up the tag name as a type.
+
+ */
+
+static void
+synthesize_typedef (dip, objfile, type)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+     struct type *type;
+{
+  struct symbol *sym = NULL;
+  
+  if (dip -> at_name != NULL)
+    {
+      sym = (struct symbol *)
+	obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
+      OBJSTAT (objfile, n_syms++);
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = create_name (dip -> at_name,
+				       &objfile->symbol_obstack);
+      SYMBOL_INIT_LANGUAGE_SPECIFIC (sym, cu_language);
+      SYMBOL_TYPE (sym) = type;
+      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, list_in_scope);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_mod_fund_type -- decode a modified fundamental type
+
+SYNOPSIS
+
+	static struct type *decode_mod_fund_type (char *typedata)
+
+DESCRIPTION
+
+	Decode a block of data containing a modified fundamental
+	type specification.  TYPEDATA is a pointer to the block,
+	which starts with a length containing the size of the rest
+	of the block.  At the end of the block is a fundmental type
+	code value that gives the fundamental type.  Everything
+	in between are type modifiers.
+
+	We simply compute the number of modifiers and call the general
+	function decode_modified_type to do the actual work.
+*/
+
+static struct type *
+decode_mod_fund_type (typedata)
+     char *typedata;
+{
+  struct type *typep = NULL;
+  unsigned short modcount;
+  int nbytes;
+  
+  /* Get the total size of the block, exclusive of the size itself */
+
+  nbytes = attribute_size (AT_mod_fund_type);
+  modcount = target_to_host (typedata, nbytes, GET_UNSIGNED, current_objfile);
+  typedata += nbytes;
+
+  /* Deduct the size of the fundamental type bytes at the end of the block. */
+
+  modcount -= attribute_size (AT_fund_type);
+
+  /* Now do the actual decoding */
+
+  typep = decode_modified_type (typedata, modcount, AT_mod_fund_type);
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_mod_u_d_type -- decode a modified user defined type
+
+SYNOPSIS
+
+	static struct type *decode_mod_u_d_type (char *typedata)
+
+DESCRIPTION
+
+	Decode a block of data containing a modified user defined
+	type specification.  TYPEDATA is a pointer to the block,
+	which consists of a two byte length, containing the size
+	of the rest of the block.  At the end of the block is a
+	four byte value that gives a reference to a user defined type.
+	Everything in between are type modifiers.
+
+	We simply compute the number of modifiers and call the general
+	function decode_modified_type to do the actual work.
+*/
+
+static struct type *
+decode_mod_u_d_type (typedata)
+     char *typedata;
+{
+  struct type *typep = NULL;
+  unsigned short modcount;
+  int nbytes;
+  
+  /* Get the total size of the block, exclusive of the size itself */
+
+  nbytes = attribute_size (AT_mod_u_d_type);
+  modcount = target_to_host (typedata, nbytes, GET_UNSIGNED, current_objfile);
+  typedata += nbytes;
+
+  /* Deduct the size of the reference type bytes at the end of the block. */
+
+  modcount -= attribute_size (AT_user_def_type);
+
+  /* Now do the actual decoding */
+
+  typep = decode_modified_type (typedata, modcount, AT_mod_u_d_type);
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_modified_type -- decode modified user or fundamental type
+
+SYNOPSIS
+
+	static struct type *decode_modified_type (char *modifiers,
+	    unsigned short modcount, int mtype)
+
+DESCRIPTION
+
+	Decode a modified type, either a modified fundamental type or
+	a modified user defined type.  MODIFIERS is a pointer to the
+	block of bytes that define MODCOUNT modifiers.  Immediately
+	following the last modifier is a short containing the fundamental
+	type or a long containing the reference to the user defined
+	type.  Which one is determined by MTYPE, which is either
+	AT_mod_fund_type or AT_mod_u_d_type to indicate what modified
+	type we are generating.
+
+	We call ourself recursively to generate each modified type,`
+	until MODCOUNT reaches zero, at which point we have consumed
+	all the modifiers and generate either the fundamental type or
+	user defined type.  When the recursion unwinds, each modifier
+	is applied in turn to generate the full modified type.
+
+NOTES
+
+	If we find a modifier that we don't recognize, and it is not one
+	of those reserved for application specific use, then we issue a
+	warning and simply ignore the modifier.
+
+BUGS
+
+	We currently ignore MOD_const and MOD_volatile.  (FIXME)
+
+ */
+
+static struct type *
+decode_modified_type (modifiers, modcount, mtype)
+     char *modifiers;
+     unsigned int modcount;
+     int mtype;
+{
+  struct type *typep = NULL;
+  unsigned short fundtype;
+  DIE_REF die_ref;
+  char modifier;
+  int nbytes;
+  
+  if (modcount == 0)
+    {
+      switch (mtype)
+	{
+	case AT_mod_fund_type:
+	  nbytes = attribute_size (AT_fund_type);
+	  fundtype = target_to_host (modifiers, nbytes, GET_UNSIGNED,
+				     current_objfile);
+	  typep = decode_fund_type (fundtype);
+	  break;
+	case AT_mod_u_d_type:
+	  nbytes = attribute_size (AT_user_def_type);
+	  die_ref = target_to_host (modifiers, nbytes, GET_UNSIGNED,
+				    current_objfile);
+	  if ((typep = lookup_utype (die_ref)) == NULL)
+	    {
+	      typep = alloc_utype (die_ref, NULL);
+	    }
+	  break;
+	default:
+	  complain (&botched_modified_type, DIE_ID, DIE_NAME, mtype);
+	  typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+	  break;
+	}
+    }
+  else
+    {
+      modifier = *modifiers++;
+      typep = decode_modified_type (modifiers, --modcount, mtype);
+      switch (modifier)
+	{
+	  case MOD_pointer_to:
+	    typep = lookup_pointer_type (typep);
+	    break;
+	  case MOD_reference_to:
+	    typep = lookup_reference_type (typep);
+	    break;
+	  case MOD_const:
+	    complain (&const_ignored, DIE_ID, DIE_NAME);  /* FIXME */
+	    break;
+	  case MOD_volatile:
+	    complain (&volatile_ignored, DIE_ID, DIE_NAME); /* FIXME */
+	    break;
+	  default:
+	    if (!(MOD_lo_user <= (unsigned char) modifier
+		  && (unsigned char) modifier <= MOD_hi_user))
+	      {
+		complain (&unknown_type_modifier, DIE_ID, DIE_NAME, modifier);
+	      }
+	    break;
+	}
+    }
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	decode_fund_type -- translate basic DWARF type to gdb base type
+
+DESCRIPTION
+
+	Given an integer that is one of the fundamental DWARF types,
+	translate it to one of the basic internal gdb types and return
+	a pointer to the appropriate gdb type (a "struct type *").
+
+NOTES
+
+	For robustness, if we are asked to translate a fundamental
+	type that we are unprepared to deal with, we return int so
+	callers can always depend upon a valid type being returned,
+	and so gdb may at least do something reasonable by default.
+	If the type is not in the range of those types defined as
+	application specific types, we also issue a warning.
+*/
+
+static struct type *
+decode_fund_type (fundtype)
+     unsigned int fundtype;
+{
+  struct type *typep = NULL;
+  
+  switch (fundtype)
+    {
+
+    case FT_void:
+      typep = dwarf_fundamental_type (current_objfile, FT_VOID);
+      break;
+    
+    case FT_boolean:		/* Was FT_set in AT&T version */
+      typep = dwarf_fundamental_type (current_objfile, FT_BOOLEAN);
+      break;
+
+    case FT_pointer:		/* (void *) */
+      typep = dwarf_fundamental_type (current_objfile, FT_VOID);
+      typep = lookup_pointer_type (typep);
+      break;
+    
+    case FT_char:
+      typep = dwarf_fundamental_type (current_objfile, FT_CHAR);
+      break;
+    
+    case FT_signed_char:
+      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_CHAR);
+      break;
+
+    case FT_unsigned_char:
+      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_CHAR);
+      break;
+    
+    case FT_short:
+      typep = dwarf_fundamental_type (current_objfile, FT_SHORT);
+      break;
+
+    case FT_signed_short:
+      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_SHORT);
+      break;
+    
+    case FT_unsigned_short:
+      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_SHORT);
+      break;
+    
+    case FT_integer:
+      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+      break;
+
+    case FT_signed_integer:
+      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_INTEGER);
+      break;
+    
+    case FT_unsigned_integer:
+      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_INTEGER);
+      break;
+    
+    case FT_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_LONG);
+      break;
+
+    case FT_signed_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_LONG);
+      break;
+    
+    case FT_unsigned_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_LONG);
+      break;
+    
+    case FT_long_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_LONG_LONG);
+      break;
+
+    case FT_signed_long_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_SIGNED_LONG_LONG);
+      break;
+
+    case FT_unsigned_long_long:
+      typep = dwarf_fundamental_type (current_objfile, FT_UNSIGNED_LONG_LONG);
+      break;
+
+    case FT_float:
+      typep = dwarf_fundamental_type (current_objfile, FT_FLOAT);
+      break;
+    
+    case FT_dbl_prec_float:
+      typep = dwarf_fundamental_type (current_objfile, FT_DBL_PREC_FLOAT);
+      break;
+    
+    case FT_ext_prec_float:
+      typep = dwarf_fundamental_type (current_objfile, FT_EXT_PREC_FLOAT);
+      break;
+    
+    case FT_complex:
+      typep = dwarf_fundamental_type (current_objfile, FT_COMPLEX);
+      break;
+    
+    case FT_dbl_prec_complex:
+      typep = dwarf_fundamental_type (current_objfile, FT_DBL_PREC_COMPLEX);
+      break;
+    
+    case FT_ext_prec_complex:
+      typep = dwarf_fundamental_type (current_objfile, FT_EXT_PREC_COMPLEX);
+      break;
+    
+    }
+
+  if (typep == NULL)
+    {
+      typep = dwarf_fundamental_type (current_objfile, FT_INTEGER);
+      if (!(FT_lo_user <= fundtype && fundtype <= FT_hi_user))
+	{
+	  complain (&unexpected_fund_type, DIE_ID, DIE_NAME, fundtype);
+	}
+    }
+    
+  return (typep);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	create_name -- allocate a fresh copy of a string on an obstack
+
+DESCRIPTION
+
+	Given a pointer to a string and a pointer to an obstack, allocates
+	a fresh copy of the string on the specified obstack.
+
+*/
+
+static char *
+create_name (name, obstackp)
+     char *name;
+     struct obstack *obstackp;
+{
+  int length;
+  char *newname;
+
+  length = strlen (name) + 1;
+  newname = (char *) obstack_alloc (obstackp, length);
+  strcpy (newname, name);
+  return (newname);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	basicdieinfo -- extract the minimal die info from raw die data
+
+SYNOPSIS
+
+	void basicdieinfo (char *diep, struct dieinfo *dip,
+			   struct objfile *objfile)
+
+DESCRIPTION
+
+	Given a pointer to raw DIE data, and a pointer to an instance of a
+	die info structure, this function extracts the basic information
+	from the DIE data required to continue processing this DIE, along
+	with some bookkeeping information about the DIE.
+
+	The information we absolutely must have includes the DIE tag,
+	and the DIE length.  If we need the sibling reference, then we
+	will have to call completedieinfo() to process all the remaining
+	DIE information.
+
+	Note that since there is no guarantee that the data is properly
+	aligned in memory for the type of access required (indirection
+	through anything other than a char pointer), and there is no
+	guarantee that it is in the same byte order as the gdb host,
+	we call a function which deals with both alignment and byte
+	swapping issues.  Possibly inefficient, but quite portable.
+
+	We also take care of some other basic things at this point, such
+	as ensuring that the instance of the die info structure starts
+	out completely zero'd and that curdie is initialized for use
+	in error reporting if we have a problem with the current die.
+
+NOTES
+
+	All DIE's must have at least a valid length, thus the minimum
+	DIE size is SIZEOF_DIE_LENGTH.  In order to have a valid tag, the
+	DIE size must be at least SIZEOF_DIE_TAG larger, otherwise they
+	are forced to be TAG_padding DIES.
+
+	Padding DIES must be at least SIZEOF_DIE_LENGTH in length, implying
+	that if a padding DIE is used for alignment and the amount needed is
+	less than SIZEOF_DIE_LENGTH, then the padding DIE has to be big
+	enough to align to the next alignment boundry.
+
+	We do some basic sanity checking here, such as verifying that the
+	length of the die would not cause it to overrun the recorded end of
+	the buffer holding the DIE info.  If we find a DIE that is either
+	too small or too large, we force it's length to zero which should
+	cause the caller to take appropriate action.
+ */
+
+static void
+basicdieinfo (dip, diep, objfile)
+     struct dieinfo *dip;
+     char *diep;
+     struct objfile *objfile;
+{
+  curdie = dip;
+  memset (dip, 0, sizeof (struct dieinfo));
+  dip -> die = diep;
+  dip -> die_ref = dbroff + (diep - dbbase);
+  dip -> die_length = target_to_host (diep, SIZEOF_DIE_LENGTH, GET_UNSIGNED,
+				      objfile);
+  if ((dip -> die_length < SIZEOF_DIE_LENGTH) ||
+      ((diep + dip -> die_length) > (dbbase + dbsize)))
+    {
+      complain (&malformed_die, DIE_ID, DIE_NAME, dip -> die_length);
+      dip -> die_length = 0;
+    }
+  else if (dip -> die_length < (SIZEOF_DIE_LENGTH + SIZEOF_DIE_TAG))
+    {
+      dip -> die_tag = TAG_padding;
+    }
+  else
+    {
+      diep += SIZEOF_DIE_LENGTH;
+      dip -> die_tag = target_to_host (diep, SIZEOF_DIE_TAG, GET_UNSIGNED,
+				       objfile);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	completedieinfo -- finish reading the information for a given DIE
+
+SYNOPSIS
+
+	void completedieinfo (struct dieinfo *dip, struct objfile *objfile)
+
+DESCRIPTION
+
+	Given a pointer to an already partially initialized die info structure,
+	scan the raw DIE data and finish filling in the die info structure
+	from the various attributes found.
+   
+	Note that since there is no guarantee that the data is properly
+	aligned in memory for the type of access required (indirection
+	through anything other than a char pointer), and there is no
+	guarantee that it is in the same byte order as the gdb host,
+	we call a function which deals with both alignment and byte
+	swapping issues.  Possibly inefficient, but quite portable.
+
+NOTES
+
+	Each time we are called, we increment the diecount variable, which
+	keeps an approximate count of the number of dies processed for
+	each compilation unit.  This information is presented to the user
+	if the info_verbose flag is set.
+
+ */
+
+static void
+completedieinfo (dip, objfile)
+     struct dieinfo *dip;
+     struct objfile *objfile;
+{
+  char *diep;			/* Current pointer into raw DIE data */
+  char *end;			/* Terminate DIE scan here */
+  unsigned short attr;		/* Current attribute being scanned */
+  unsigned short form;		/* Form of the attribute */
+  int nbytes;			/* Size of next field to read */
+  
+  diecount++;
+  diep = dip -> die;
+  end = diep + dip -> die_length;
+  diep += SIZEOF_DIE_LENGTH + SIZEOF_DIE_TAG;
+  while (diep < end)
+    {
+      attr = target_to_host (diep, SIZEOF_ATTRIBUTE, GET_UNSIGNED, objfile);
+      diep += SIZEOF_ATTRIBUTE;
+      if ((nbytes = attribute_size (attr)) == -1)
+	{
+	  complain (&unknown_attribute_length, DIE_ID, DIE_NAME);
+	  diep = end;
+	  continue;
+	}
+      switch (attr)
+	{
+	case AT_fund_type:
+	  dip -> at_fund_type = target_to_host (diep, nbytes, GET_UNSIGNED,
+						objfile);
+	  break;
+	case AT_ordering:
+	  dip -> at_ordering = target_to_host (diep, nbytes, GET_UNSIGNED,
+					       objfile);
+	  break;
+	case AT_bit_offset:
+	  dip -> at_bit_offset = target_to_host (diep, nbytes, GET_UNSIGNED,
+						 objfile);
+	  break;
+	case AT_sibling:
+	  dip -> at_sibling = target_to_host (diep, nbytes, GET_UNSIGNED,
+					      objfile);
+	  break;
+	case AT_stmt_list:
+	  dip -> at_stmt_list = target_to_host (diep, nbytes, GET_UNSIGNED,
+						objfile);
+	  dip -> has_at_stmt_list = 1;
+	  break;
+	case AT_low_pc:
+	  dip -> at_low_pc = target_to_host (diep, nbytes, GET_UNSIGNED,
+					     objfile);
+	  dip -> at_low_pc += baseaddr;
+	  dip -> has_at_low_pc = 1;
+	  break;
+	case AT_high_pc:
+	  dip -> at_high_pc = target_to_host (diep, nbytes, GET_UNSIGNED,
+					      objfile);
+	  dip -> at_high_pc += baseaddr;
+	  break;
+	case AT_language:
+	  dip -> at_language = target_to_host (diep, nbytes, GET_UNSIGNED,
+					       objfile);
+	  break;
+	case AT_user_def_type:
+	  dip -> at_user_def_type = target_to_host (diep, nbytes,
+						    GET_UNSIGNED, objfile);
+	  break;
+	case AT_byte_size:
+	  dip -> at_byte_size = target_to_host (diep, nbytes, GET_UNSIGNED,
+						objfile);
+	  dip -> has_at_byte_size = 1;
+	  break;
+	case AT_bit_size:
+	  dip -> at_bit_size = target_to_host (diep, nbytes, GET_UNSIGNED,
+					       objfile);
+	  break;
+	case AT_member:
+	  dip -> at_member = target_to_host (diep, nbytes, GET_UNSIGNED,
+					     objfile);
+	  break;
+	case AT_discr:
+	  dip -> at_discr = target_to_host (diep, nbytes, GET_UNSIGNED,
+					    objfile);
+	  break;
+	case AT_location:
+	  dip -> at_location = diep;
+	  break;
+	case AT_mod_fund_type:
+	  dip -> at_mod_fund_type = diep;
+	  break;
+	case AT_subscr_data:
+	  dip -> at_subscr_data = diep;
+	  break;
+	case AT_mod_u_d_type:
+	  dip -> at_mod_u_d_type = diep;
+	  break;
+	case AT_element_list:
+	  dip -> at_element_list = diep;
+	  dip -> short_element_list = 0;
+	  break;
+	case AT_short_element_list:
+	  dip -> at_element_list = diep;
+	  dip -> short_element_list = 1;
+	  break;
+	case AT_discr_value:
+	  dip -> at_discr_value = diep;
+	  break;
+	case AT_string_length:
+	  dip -> at_string_length = diep;
+	  break;
+	case AT_name:
+	  dip -> at_name = diep;
+	  break;
+	case AT_comp_dir:
+	  /* For now, ignore any "hostname:" portion, since gdb doesn't
+	     know how to deal with it.  (FIXME). */
+	  dip -> at_comp_dir = strrchr (diep, ':');
+	  if (dip -> at_comp_dir != NULL)
+	    {
+	      dip -> at_comp_dir++;
+	    }
+	  else
+	    {
+	      dip -> at_comp_dir = diep;
+	    }
+	  break;
+	case AT_producer:
+	  dip -> at_producer = diep;
+	  break;
+	case AT_start_scope:
+	  dip -> at_start_scope = target_to_host (diep, nbytes, GET_UNSIGNED,
+						  objfile);
+	  break;
+	case AT_stride_size:
+	  dip -> at_stride_size = target_to_host (diep, nbytes, GET_UNSIGNED,
+						  objfile);
+	  break;
+	case AT_src_info:
+	  dip -> at_src_info = target_to_host (diep, nbytes, GET_UNSIGNED,
+					       objfile);
+	  break;
+	case AT_prototyped:
+	  dip -> at_prototyped = diep;
+	  break;
+	default:
+	  /* Found an attribute that we are unprepared to handle.  However
+	     it is specifically one of the design goals of DWARF that
+	     consumers should ignore unknown attributes.  As long as the
+	     form is one that we recognize (so we know how to skip it),
+	     we can just ignore the unknown attribute. */
+	  break;
+	}
+      form = FORM_FROM_ATTR (attr);
+      switch (form)
+	{
+	case FORM_DATA2:
+	  diep += 2;
+	  break;
+	case FORM_DATA4:
+	case FORM_REF:
+	  diep += 4;
+	  break;
+	case FORM_DATA8:
+	  diep += 8;
+	  break;
+	case FORM_ADDR:
+	  diep += TARGET_FT_POINTER_SIZE (objfile);
+	  break;
+	case FORM_BLOCK2:
+	  diep += 2 + target_to_host (diep, nbytes, GET_UNSIGNED, objfile);
+	  break;
+	case FORM_BLOCK4:
+	  diep += 4 + target_to_host (diep, nbytes, GET_UNSIGNED, objfile);
+	  break;
+	case FORM_STRING:
+	  diep += strlen (diep) + 1;
+	  break;
+	default:
+	  complain (&unknown_attribute_form, DIE_ID, DIE_NAME, form);
+	  diep = end;
+	  break;
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	target_to_host -- swap in target data to host
+
+SYNOPSIS
+
+	target_to_host (char *from, int nbytes, int signextend,
+			struct objfile *objfile)
+
+DESCRIPTION
+
+	Given pointer to data in target format in FROM, a byte count for
+	the size of the data in NBYTES, a flag indicating whether or not
+	the data is signed in SIGNEXTEND, and a pointer to the current
+	objfile in OBJFILE, convert the data to host format and return
+	the converted value.
+
+NOTES
+
+	FIXME:  If we read data that is known to be signed, and expect to
+	use it as signed data, then we need to explicitly sign extend the
+	result until the bfd library is able to do this for us.
+
+	FIXME: Would a 32 bit target ever need an 8 byte result?
+
+ */
+
+static CORE_ADDR
+target_to_host (from, nbytes, signextend, objfile)
+     char *from;
+     int nbytes;
+     int signextend;		/* FIXME:  Unused */
+     struct objfile *objfile;
+{
+  CORE_ADDR rtnval;
+
+  switch (nbytes)
+    {
+      case 8:
+        rtnval = bfd_get_64 (objfile -> obfd, (bfd_byte *) from);
+	break;
+      case 4:
+	rtnval = bfd_get_32 (objfile -> obfd, (bfd_byte *) from);
+	break;
+      case 2:
+	rtnval = bfd_get_16 (objfile -> obfd, (bfd_byte *) from);
+	break;
+      case 1:
+	rtnval = bfd_get_8 (objfile -> obfd, (bfd_byte *) from);
+	break;
+      default:
+	complain (&no_bfd_get_N, DIE_ID, DIE_NAME, nbytes);
+	rtnval = 0;
+	break;
+    }
+  return (rtnval);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	attribute_size -- compute size of data for a DWARF attribute
+
+SYNOPSIS
+
+	static int attribute_size (unsigned int attr)
+
+DESCRIPTION
+
+	Given a DWARF attribute in ATTR, compute the size of the first
+	piece of data associated with this attribute and return that
+	size.
+
+	Returns -1 for unrecognized attributes.
+
+ */
+
+static int
+attribute_size (attr)
+     unsigned int attr;
+{
+  int nbytes;			/* Size of next data for this attribute */
+  unsigned short form;		/* Form of the attribute */
+
+  form = FORM_FROM_ATTR (attr);
+  switch (form)
+    {
+      case FORM_STRING:		/* A variable length field is next */
+        nbytes = 0;
+	break;
+      case FORM_DATA2:		/* Next 2 byte field is the data itself */
+      case FORM_BLOCK2:		/* Next 2 byte field is a block length */
+	nbytes = 2;
+	break;
+      case FORM_DATA4:		/* Next 4 byte field is the data itself */
+      case FORM_BLOCK4:		/* Next 4 byte field is a block length */
+      case FORM_REF:		/* Next 4 byte field is a DIE offset */
+	nbytes = 4;
+	break;
+      case FORM_DATA8:		/* Next 8 byte field is the data itself */
+	nbytes = 8;
+	break;
+      case FORM_ADDR:		/* Next field size is target sizeof(void *) */
+	nbytes = TARGET_FT_POINTER_SIZE (objfile);
+	break;
+      default:
+	complain (&unknown_attribute_form, DIE_ID, DIE_NAME, form);
+	nbytes = -1;
+	break;
+      }
+  return (nbytes);
+}
diff --git a/gdb/elfread.c b/gdb/elfread.c
new file mode 100644
index 0000000..417039e
--- /dev/null
+++ b/gdb/elfread.c
@@ -0,0 +1,849 @@
+/* Read ELF (Executable and Linking Format) object files for GDB.
+   Copyright 1991, 92, 93, 94, 95, 96, 1998 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "elf-bfd.h"
+#include "elf/mips.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "gdb-stabs.h"
+#include "complaints.h"
+#include "demangle.h"
+
+/* The struct elfinfo is available only during ELF symbol table and
+   psymtab reading.  It is destroyed at the complation of psymtab-reading.
+   It's local to elf_symfile_read.  */
+
+struct elfinfo {
+  file_ptr dboffset;		/* Offset to dwarf debug section */
+  unsigned int dbsize;		/* Size of dwarf debug section */
+  file_ptr lnoffset;		/* Offset to dwarf line number section */
+  unsigned int lnsize;		/* Size of dwarf line number section */
+  asection *stabsect;		/* Section pointer for .stab section */
+  asection *stabindexsect;	/* Section pointer for .stab.index section */
+  asection *mdebugsect;		/* Section pointer for .mdebug section */
+};
+
+/* Various things we might complain about... */
+
+struct complaint section_info_complaint = 
+  {"elf/stab section information %s without a preceding file symbol", 0, 0};
+
+struct complaint section_info_dup_complaint = 
+  {"duplicated elf/stab section information for %s", 0, 0};
+
+struct complaint stab_info_mismatch_complaint = 
+  {"elf/stab section information missing for %s", 0, 0};
+
+struct complaint stab_info_questionable_complaint = 
+  {"elf/stab section information questionable for %s", 0, 0};
+
+static void
+elf_symfile_init PARAMS ((struct objfile *));
+
+static void
+elf_new_init PARAMS ((struct objfile *));
+
+static void
+elf_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+elf_symfile_finish PARAMS ((struct objfile *));
+
+static void
+elf_symtab_read PARAMS ((bfd *,  CORE_ADDR, struct objfile *, int));
+
+static void
+free_elfinfo PARAMS ((void *));
+
+static struct minimal_symbol *
+record_minimal_symbol_and_info PARAMS ((char *, CORE_ADDR,
+					enum minimal_symbol_type, char *,
+					asection *bfd_section,
+					struct objfile *));
+
+static void
+elf_locate_sections PARAMS ((bfd *, asection *, void *));
+
+/* We are called once per section from elf_symfile_read.  We
+   need to examine each section we are passed, check to see
+   if it is something we are interested in processing, and
+   if so, stash away some access information for the section.
+
+   For now we recognize the dwarf debug information sections and
+   line number sections from matching their section names.  The
+   ELF definition is no real help here since it has no direct
+   knowledge of DWARF (by design, so any debugging format can be
+   used).
+
+   We also recognize the ".stab" sections used by the Sun compilers
+   released with Solaris 2.
+
+   FIXME: The section names should not be hardwired strings (what
+   should they be?  I don't think most object file formats have enough
+   section flags to specify what kind of debug section it is
+   -kingdon).  */
+
+static void
+elf_locate_sections (ignore_abfd, sectp, eip)
+     bfd *ignore_abfd;
+     asection *sectp;
+     PTR eip;
+{
+  register struct elfinfo *ei;
+
+  ei = (struct elfinfo *) eip;
+  if (STREQ (sectp -> name, ".debug"))
+    {
+      ei -> dboffset = sectp -> filepos;
+      ei -> dbsize = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp -> name, ".line"))
+    {
+      ei -> lnoffset = sectp -> filepos;
+      ei -> lnsize = bfd_get_section_size_before_reloc (sectp);
+    }
+  else if (STREQ (sectp -> name, ".stab"))
+    {
+      ei -> stabsect = sectp;
+    }
+  else if (STREQ (sectp -> name, ".stab.index"))
+    {
+      ei -> stabindexsect = sectp;
+    }
+  else if (STREQ (sectp -> name, ".mdebug"))
+    {
+      ei -> mdebugsect = sectp;
+    }
+}
+
+#if 0	/* Currently unused */
+
+char *
+elf_interpreter (abfd)
+     bfd *abfd;
+{
+  sec_ptr interp_sec;
+  unsigned size;
+  char *interp = NULL;
+
+  interp_sec = bfd_get_section_by_name (abfd, ".interp");
+  if (interp_sec)
+    {
+      size = bfd_section_size (abfd, interp_sec);
+      interp = alloca (size);
+      if (bfd_get_section_contents (abfd, interp_sec, interp, (file_ptr)0,
+				    size))
+	{
+	  interp = savestring (interp, size - 1);
+	}
+      else
+	{
+	  interp = NULL;
+	}
+    }
+  return (interp);
+}
+
+#endif
+
+static struct minimal_symbol *
+record_minimal_symbol_and_info (name, address, ms_type, info, bfd_section,
+				objfile)
+     char *name;
+     CORE_ADDR address;
+     enum minimal_symbol_type ms_type;
+     char *info;		/* FIXME, is this really char *? */
+     asection *bfd_section;
+     struct objfile *objfile;
+{
+  int section;
+
+  /* Guess the section from the type.  This is likely to be wrong in
+     some cases.  */
+  switch (ms_type)
+    {
+    case mst_text:
+    case mst_file_text:
+      section = SECT_OFF_TEXT;
+#ifdef SMASH_TEXT_ADDRESS
+      SMASH_TEXT_ADDRESS (address);
+#endif
+      break;
+    case mst_data:
+    case mst_file_data:
+      section = SECT_OFF_DATA;
+      break;
+    case mst_bss:
+    case mst_file_bss:
+      section = SECT_OFF_BSS;
+      break;
+    default:
+      section = -1;
+      break;
+    }
+
+  return prim_record_minimal_symbol_and_info
+    (name, address, ms_type, info, section, bfd_section, objfile);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	elf_symtab_read -- read the symbol table of an ELF file
+
+SYNOPSIS
+
+	void elf_symtab_read (bfd *abfd, CORE_ADDR addr,
+			      struct objfile *objfile, int dynamic)
+
+DESCRIPTION
+
+	Given an open bfd, a base address to relocate symbols to, and a
+	flag that specifies whether or not this bfd is for an executable
+	or not (may be shared library for example), add all the global
+	function and data symbols to the minimal symbol table.
+
+	In stabs-in-ELF, as implemented by Sun, there are some local symbols
+	defined in the ELF symbol table, which can be used to locate
+	the beginnings of sections from each ".o" file that was linked to
+	form the executable objfile.  We gather any such info and record it
+	in data structures hung off the objfile's private data.
+
+*/
+
+static void
+elf_symtab_read (abfd, addr, objfile, dynamic)
+     bfd *abfd;
+     CORE_ADDR addr;
+     struct objfile *objfile;
+     int dynamic;
+{
+  long storage_needed;
+  asymbol *sym;
+  asymbol **symbol_table;
+  long number_of_symbols;
+  long i;
+  int index;
+  struct cleanup *back_to;
+  CORE_ADDR symaddr;
+  enum minimal_symbol_type ms_type;
+  /* If sectinfo is nonNULL, it contains section info that should end up
+     filed in the objfile.  */
+  struct stab_section_info *sectinfo = NULL;
+  /* If filesym is nonzero, it points to a file symbol, but we haven't
+     seen any section info for it yet.  */
+  asymbol *filesym = 0;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  /* Name of filesym, as saved on the symbol_obstack.  */
+  char *filesymname = obsavestring ("", 0, &objfile->symbol_obstack);
+#endif
+  struct dbx_symfile_info *dbx = objfile->sym_stab_info;
+  unsigned long size;
+  int stripped = (bfd_get_symcount (abfd) == 0);
+ 
+  if (dynamic)
+    {
+      storage_needed = bfd_get_dynamic_symtab_upper_bound (abfd);
+
+      /* Nothing to be done if there is no dynamic symtab.  */
+      if (storage_needed < 0)
+	return;
+    }
+  else
+    {
+      storage_needed = bfd_get_symtab_upper_bound (abfd);
+      if (storage_needed < 0)
+	error ("Can't read symbols from %s: %s", bfd_get_filename (abfd),
+	       bfd_errmsg (bfd_get_error ()));
+    }
+  if (storage_needed > 0)
+    {
+      symbol_table = (asymbol **) xmalloc (storage_needed);
+      back_to = make_cleanup (free, symbol_table);
+      if (dynamic)
+        number_of_symbols = bfd_canonicalize_dynamic_symtab (abfd,
+							     symbol_table);
+      else
+        number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table);
+      if (number_of_symbols < 0)
+	error ("Can't read symbols from %s: %s", bfd_get_filename (abfd),
+	       bfd_errmsg (bfd_get_error ()));
+      for (i = 0; i < number_of_symbols; i++)
+	{
+	  sym = symbol_table[i];
+	  if (sym -> name == NULL || *sym -> name == '\0')
+	    {
+	      /* Skip names that don't exist (shouldn't happen), or names
+		 that are null strings (may happen). */
+	      continue;
+	    }
+
+	  if (dynamic
+	      && sym -> section == &bfd_und_section
+	      && (sym -> flags & BSF_FUNCTION))
+	    {
+	      struct minimal_symbol *msym;
+
+	      /* Symbol is a reference to a function defined in
+		 a shared library.
+		 If its value is non zero then it is usually the address
+		 of the corresponding entry in the procedure linkage table,
+		 relative to the base address.
+		 If its value is zero then the dynamic linker has to resolve
+		 the symbol. We are unable to find any meaningful address
+		 for this symbol in the executable file, so we skip it.  */
+	      symaddr = sym -> value;
+	      if (symaddr == 0)
+		continue;
+	      symaddr += addr;
+	      msym = record_minimal_symbol_and_info
+		((char *) sym -> name, symaddr,
+		mst_solib_trampoline, NULL, sym -> section, objfile);
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      if (msym != NULL)
+		msym->filename = filesymname;
+#endif
+	      continue;
+	    }
+
+	  /* If it is a nonstripped executable, do not enter dynamic
+	     symbols, as the dynamic symbol table is usually a subset
+	     of the main symbol table.  */
+	  if (dynamic && !stripped)
+	    continue;
+	  if (sym -> flags & BSF_FILE)
+	    {
+	      /* STT_FILE debugging symbol that helps stabs-in-elf debugging.
+		 Chain any old one onto the objfile; remember new sym.  */
+	      if (sectinfo != NULL)
+		{
+		  sectinfo -> next = dbx -> stab_section_info;
+		  dbx -> stab_section_info = sectinfo;
+		  sectinfo = NULL;
+		}
+	      filesym = sym;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      filesymname =
+		obsavestring ((char *)filesym->name, strlen (filesym->name),
+			      &objfile->symbol_obstack);
+#endif
+	    }
+	  else if (sym -> flags & (BSF_GLOBAL | BSF_LOCAL | BSF_WEAK))
+	    {
+	      struct minimal_symbol *msym;
+
+	      /* Select global/local/weak symbols.  Note that bfd puts abs
+		 symbols in their own section, so all symbols we are
+		 interested in will have a section. */
+	      /* Bfd symbols are section relative. */
+	      symaddr = sym -> value + sym -> section -> vma;
+	      /* Relocate all non-absolute symbols by base address.  */
+	      if (sym -> section != &bfd_abs_section)
+		{
+		  symaddr += addr;
+		}
+	      /* For non-absolute symbols, use the type of the section
+		 they are relative to, to intuit text/data.  Bfd provides
+		 no way of figuring this out for absolute symbols. */
+	      if (sym -> section == &bfd_abs_section)
+		{
+		  /* This is a hack to get the minimal symbol type
+		     right for Irix 5, which has absolute adresses
+		     with special section indices for dynamic symbols. */
+		  unsigned short shndx =
+		    ((elf_symbol_type *) sym)->internal_elf_sym.st_shndx;
+
+		  switch (shndx)
+		    {
+		    case SHN_MIPS_TEXT:
+		      ms_type = mst_text;
+		      break;
+		    case SHN_MIPS_DATA:
+		      ms_type = mst_data;
+		      break;
+		    case SHN_MIPS_ACOMMON:
+		      ms_type = mst_bss;
+		      break;
+		    default:
+		      ms_type = mst_abs;
+		    }
+
+		  /* If it is an Irix dynamic symbol, skip section name
+		     symbols, relocate all others. */
+		  if (ms_type != mst_abs)
+		    {
+		      if (sym->name[0] == '.')
+			continue;
+		      symaddr += addr;
+		    }
+		}
+	      else if (sym -> section -> flags & SEC_CODE)
+		{
+		  if (sym -> flags & BSF_GLOBAL)
+		    {
+		      ms_type = mst_text;
+		    }
+		  else if ((sym->name[0] == '.' && sym->name[1] == 'L')
+			   || ((sym -> flags & BSF_LOCAL)
+			       && sym->name[0] == '$'
+			       && sym->name[1] == 'L'))
+		    /* Looks like a compiler-generated label.  Skip it.
+		       The assembler should be skipping these (to keep
+		       executables small), but apparently with gcc on the
+		       delta m88k SVR4, it loses.  So to have us check too
+		       should be harmless (but I encourage people to fix this
+		       in the assembler instead of adding checks here).  */
+		    continue;
+#ifdef HARRIS_TARGET
+		  else if (sym->name[0] == '.' && sym->name[1] == '.')
+		    {
+		      /* Looks like a Harris compiler generated label for the
+			 purpose of marking instructions that are relevant to
+			 DWARF dies.  The assembler can't get rid of these 
+			 because they are relocatable addresses that the
+			 linker needs to resolve. */
+		      continue;
+		    }
+#endif	  
+		  else
+		    {
+		      ms_type = mst_file_text;
+		    }
+		}
+	      else if (sym -> section -> flags & SEC_ALLOC)
+		{
+		  if (sym -> flags & BSF_GLOBAL)
+		    {
+		      if (sym -> section -> flags & SEC_LOAD)
+			{
+			  ms_type = mst_data;
+			}
+		      else
+			{
+			  ms_type = mst_bss;
+			}
+		    }
+		  else if (sym -> flags & BSF_LOCAL)
+		    {
+		      /* Named Local variable in a Data section.  Check its
+			 name for stabs-in-elf.  The STREQ macro checks the
+			 first character inline, so we only actually do a
+			 strcmp function call on names that start with 'B'
+			 or 'D' */
+		      index = SECT_OFF_MAX;
+		      if (STREQ ("Bbss.bss", sym -> name))
+			{
+			  index = SECT_OFF_BSS;
+			}
+		      else if (STREQ ("Ddata.data", sym -> name))
+			{
+			  index = SECT_OFF_DATA;
+			}
+		      else if (STREQ ("Drodata.rodata", sym -> name))
+			{
+			  index = SECT_OFF_RODATA;
+			}
+		      if (index != SECT_OFF_MAX)
+			{
+			  /* Found a special local symbol.  Allocate a
+			     sectinfo, if needed, and fill it in.  */
+			  if (sectinfo == NULL)
+			    {
+			      sectinfo = (struct stab_section_info *)
+				xmmalloc (objfile -> md, sizeof (*sectinfo));
+			      memset ((PTR) sectinfo, 0, sizeof (*sectinfo));
+			      if (filesym == NULL)
+				{
+				  complain (&section_info_complaint,
+					    sym -> name);
+				}
+			      else
+				{
+				  sectinfo -> filename =
+				    (char *) filesym -> name;
+				}
+			    }
+			  if (sectinfo -> sections[index] != 0)
+			    {
+			      complain (&section_info_dup_complaint,
+					sectinfo -> filename);
+			    }
+			  /* Bfd symbols are section relative. */
+			  symaddr = sym -> value + sym -> section -> vma;
+			  /* Relocate non-absolute symbols by base address.  */
+			  if (sym -> section != &bfd_abs_section)
+			    {
+			      symaddr += addr;
+			    }
+			  sectinfo -> sections[index] = symaddr;
+			  /* The special local symbols don't go in the
+			     minimal symbol table, so ignore this one. */
+			  continue;
+			}
+		      /* Not a special stabs-in-elf symbol, do regular
+			 symbol processing. */
+		      if (sym -> section -> flags & SEC_LOAD)
+			{
+			  ms_type = mst_file_data;
+			}
+		      else
+			{
+			  ms_type = mst_file_bss;
+			}
+		    }
+		  else
+		    {
+		      ms_type = mst_unknown;
+		    }
+		}
+	      else
+		{
+		  /* FIXME:  Solaris2 shared libraries include lots of
+		     odd "absolute" and "undefined" symbols, that play 
+		     hob with actions like finding what function the PC
+		     is in.  Ignore them if they aren't text, data, or bss.  */
+		  /* ms_type = mst_unknown; */
+		  continue;		/* Skip this symbol. */
+		}
+	      /* Pass symbol size field in via BFD.  FIXME!!!  */
+	      size = ((elf_symbol_type *) sym) -> internal_elf_sym.st_size;
+	      msym = record_minimal_symbol_and_info
+		((char *) sym -> name, symaddr,
+		 ms_type, (PTR) size, sym -> section, objfile);
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      if (msym != NULL)
+		msym->filename = filesymname;
+#endif
+#ifdef ELF_MAKE_MSYMBOL_SPECIAL
+	      ELF_MAKE_MSYMBOL_SPECIAL(sym,msym);
+#endif
+	    }
+	}
+      do_cleanups (back_to);
+    }
+}
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to elf_symfile_init, which 
+   currently does nothing.
+
+   SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
+   in each section.  We simplify it down to a single offset for all
+   symbols.  FIXME.
+
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).
+
+   This function only does the minimum work necessary for letting the
+   user "name" things symbolically; it does not read the entire symtab.
+   Instead, it reads the external and static symbols and puts them in partial
+   symbol tables.  When more extensive information is requested of a
+   file, the corresponding partial symbol table is mutated into a full
+   fledged symbol table by going back and reading the symbols
+   for real.
+
+   We look for sections with specific names, to tell us what debug
+   format to look for:  FIXME!!!
+
+   dwarf_build_psymtabs() builds psymtabs for DWARF symbols;
+   elfstab_build_psymtabs() handles STABS symbols;
+   mdebug_build_psymtabs() handles ECOFF debugging information.
+
+   Note that ELF files have a "minimal" symbol table, which looks a lot
+   like a COFF symbol table, but has only the minimal information necessary
+   for linking.  We process this also, and use the information to
+   build gdb's minimal symbol table.  This gives us some minimal debugging
+   capability even for files compiled without -g.  */
+
+static void
+elf_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile->obfd;
+  struct elfinfo ei;
+  struct cleanup *back_to;
+  CORE_ADDR offset;
+
+  init_minimal_symbol_collection ();
+  back_to = make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  memset ((char *) &ei, 0, sizeof (ei));
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_stab_info = (struct dbx_symfile_info *)
+    xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
+  memset ((char *) objfile->sym_stab_info, 0, sizeof (struct dbx_symfile_info));
+  make_cleanup (free_elfinfo, (PTR) objfile);
+
+  /* Process the normal ELF symbol table first.  This may write some 
+     chain of info into the dbx_symfile_info in objfile->sym_stab_info,
+     which can later be used by elfstab_offset_sections.  */
+
+  /* FIXME, should take a section_offsets param, not just an offset.  */
+  offset = ANOFFSET (section_offsets, 0);
+  elf_symtab_read (abfd, offset, objfile, 0);
+
+  /* Add the dynamic symbols.  */
+
+  elf_symtab_read (abfd, offset, objfile, 1);
+
+  /* Now process debugging information, which is contained in
+     special ELF sections. */
+
+  /* If we are reinitializing, or if we have never loaded syms yet,
+     set table to empty.  MAINLINE is cleared so that *_read_psymtab
+     functions do not all also re-initialize the psymbol table. */
+  if (mainline)
+    {
+      init_psymbol_list (objfile, 0);
+      mainline = 0;
+    }
+
+  /* We first have to find them... */
+  bfd_map_over_sections (abfd, elf_locate_sections, (PTR) &ei);
+
+  /* ELF debugging information is inserted into the psymtab in the
+     order of least informative first - most informative last.  Since
+     the psymtab table is searched `most recent insertion first' this
+     increases the probability that more detailed debug information
+     for a section is found.
+
+     For instance, an object file might contain both .mdebug (XCOFF)
+     and .debug_info (DWARF2) sections then .mdebug is inserted first
+     (searched last) and DWARF2 is inserted last (searched first).  If
+     we don't do this then the XCOFF info is found first - for code in
+     an included file XCOFF info is useless. */
+
+  if (ei.mdebugsect)
+    {
+      const struct ecoff_debug_swap *swap;
+
+      /* .mdebug section, presumably holding ECOFF debugging
+	 information.  */
+      swap = get_elf_backend_data (abfd)->elf_backend_ecoff_debug_swap;
+      if (swap)
+	elfmdebug_build_psymtabs (objfile, swap, ei.mdebugsect,
+				  section_offsets);
+    }
+  if (ei.stabsect)
+    {
+      asection *str_sect;
+
+      /* Stab sections have an associated string table that looks like
+	 a separate section.  */
+      str_sect = bfd_get_section_by_name (abfd, ".stabstr");
+
+      /* FIXME should probably warn about a stab section without a stabstr.  */
+      if (str_sect)
+	elfstab_build_psymtabs (objfile,
+				section_offsets,
+				mainline,
+				ei.stabsect->filepos,
+				bfd_section_size (abfd, ei.stabsect),
+				str_sect->filepos,
+				bfd_section_size (abfd, str_sect));
+    }
+  if (dwarf2_has_info (abfd))
+    {
+      /* DWARF 2 sections */
+      dwarf2_build_psymtabs (objfile, section_offsets, mainline);
+    }
+  else if (ei.dboffset && ei.lnoffset)
+    {
+      /* DWARF sections */
+      dwarf_build_psymtabs (objfile,
+			    section_offsets, mainline,
+			    ei.dboffset, ei.dbsize,
+			    ei.lnoffset, ei.lnsize);
+    }
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+
+  do_cleanups (back_to);
+}
+
+/* This cleans up the objfile's sym_stab_info pointer, and the chain of
+   stab_section_info's, that might be dangling from it.  */
+
+static void
+free_elfinfo (objp)
+     PTR objp;
+{
+  struct objfile *objfile = (struct objfile *)objp;
+  struct dbx_symfile_info *dbxinfo = objfile->sym_stab_info;
+  struct stab_section_info *ssi, *nssi;
+
+  ssi = dbxinfo->stab_section_info;
+  while (ssi)
+    {
+      nssi = ssi->next;
+      mfree (objfile->md, ssi);
+      ssi = nssi;
+    }
+
+  dbxinfo->stab_section_info = 0;	/* Just say No mo info about this.  */
+}
+
+
+/* Initialize anything that needs initializing when a completely new symbol
+   file is specified (not just adding some symbols from another file, e.g. a
+   shared library).
+
+   We reinitialize buildsym, since we may be reading stabs from an ELF file.  */
+
+static void
+elf_new_init (ignore)
+     struct objfile *ignore;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+elf_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile -> sym_stab_info != NULL)
+    {
+      mfree (objfile -> md, objfile -> sym_stab_info);
+    }
+}
+
+/* ELF specific initialization routine for reading symbols.
+
+   It is passed a pointer to a struct sym_fns which contains, among other
+   things, the BFD for the file whose symbols are being read, and a slot for
+   a pointer to "private data" which we can fill with goodies.
+
+   For now at least, we have nothing in particular to do, so this function is
+   just a stub. */
+
+static void
+elf_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  /* ELF objects may be reordered, so set OBJF_REORDERED.  If we
+     find this causes a significant slowdown in gdb then we could
+     set it in the debug symbol readers only when necessary.  */
+  objfile->flags |= OBJF_REORDERED;
+}
+
+/* When handling an ELF file that contains Sun STABS debug info,
+   some of the debug info is relative to the particular chunk of the
+   section that was generated in its individual .o file.  E.g.
+   offsets to static variables are relative to the start of the data
+   segment *for that module before linking*.  This information is
+   painfully squirreled away in the ELF symbol table as local symbols
+   with wierd names.  Go get 'em when needed.  */
+
+void
+elfstab_offset_sections (objfile, pst)
+     struct objfile *objfile;
+     struct partial_symtab *pst;
+{
+  char *filename = pst->filename;
+  struct dbx_symfile_info *dbx = objfile->sym_stab_info;
+  struct stab_section_info *maybe = dbx->stab_section_info;
+  struct stab_section_info *questionable = 0;
+  int i;
+  char *p;
+
+  /* The ELF symbol info doesn't include path names, so strip the path
+     (if any) from the psymtab filename.  */
+  while (0 != (p = strchr (filename, '/')))
+    filename = p+1;
+
+  /* FIXME:  This linear search could speed up significantly
+     if it was chained in the right order to match how we search it,
+     and if we unchained when we found a match. */
+  for (; maybe; maybe = maybe->next)
+    {
+      if (filename[0] == maybe->filename[0]
+	  && STREQ (filename, maybe->filename))
+	{
+	  /* We found a match.  But there might be several source files
+	     (from different directories) with the same name.  */
+	  if (0 == maybe->found)
+	    break;
+	  questionable = maybe;		/* Might use it later.  */
+	}
+    }
+
+  if (maybe == 0 && questionable != 0)
+    {
+      complain (&stab_info_questionable_complaint, filename);
+      maybe = questionable;
+    }
+
+  if (maybe)
+    {
+      /* Found it!  Allocate a new psymtab struct, and fill it in.  */
+      maybe->found++;
+      pst->section_offsets = (struct section_offsets *)
+	obstack_alloc (&objfile -> psymbol_obstack,
+		       sizeof (struct section_offsets) +
+	       sizeof (pst->section_offsets->offsets) * (SECT_OFF_MAX-1));
+
+      for (i = 0; i < SECT_OFF_MAX; i++)
+	ANOFFSET (pst->section_offsets, i) = maybe->sections[i];
+      return;
+    }
+
+  /* We were unable to find any offsets for this file.  Complain.  */
+  if (dbx->stab_section_info)		/* If there *is* any info, */
+    complain (&stab_info_mismatch_complaint, filename);
+}
+
+/* Register that we are able to handle ELF object file formats.  */
+
+static struct sym_fns elf_sym_fns =
+{
+  bfd_target_elf_flavour,
+  elf_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  elf_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  elf_symfile_read,	/* sym_read: read a symbol file into symtab */
+  elf_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,
+			/* sym_offsets:  Translate ext. to int. relocation */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_elfread ()
+{
+  add_symtab_fns (&elf_sym_fns);
+}
diff --git a/gdb/environ.c b/gdb/environ.c
new file mode 100644
index 0000000..77296be
--- /dev/null
+++ b/gdb/environ.c
@@ -0,0 +1,194 @@
+/* environ.c -- library for manipulating environments for GNU.
+   Copyright (C) 1986, 1989 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define max(a, b) ((a) > (b) ? (a) : (b))
+
+#include "defs.h"
+#include "environ.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+
+
+/* Return a new environment object.  */
+
+struct environ *
+make_environ ()
+{
+  register struct environ *e;
+
+  e = (struct environ *) xmalloc (sizeof (struct environ));
+
+  e->allocated = 10;
+  e->vector = (char **) xmalloc ((e->allocated + 1) * sizeof (char *));
+  e->vector[0] = 0;
+  return e;
+}
+
+/* Free an environment and all the strings in it.  */
+
+void
+free_environ (e)
+     register struct environ *e;
+{
+  register char **vector = e->vector;
+
+  while (*vector)
+    free (*vector++);
+
+  free (e);
+}
+
+/* Copy the environment given to this process into E.
+   Also copies all the strings in it, so we can be sure
+   that all strings in these environments are safe to free.  */
+
+void
+init_environ (e)
+     register struct environ *e;
+{
+  extern char **environ;
+  register int i;
+
+  if (environ == NULL)
+    return;
+
+  for (i = 0; environ[i]; i++) /*EMPTY*/;
+
+  if (e->allocated < i)
+    {
+      e->allocated = max (i, e->allocated + 10);
+      e->vector = (char **) xrealloc ((char *)e->vector,
+				      (e->allocated + 1) * sizeof (char *));
+    }
+
+  memcpy (e->vector, environ, (i + 1) * sizeof (char *));
+
+  while (--i >= 0)
+    {
+      register int len = strlen (e->vector[i]);
+      register char *new = (char *) xmalloc (len + 1);
+      memcpy (new, e->vector[i], len + 1);
+      e->vector[i] = new;
+    }
+}
+
+/* Return the vector of environment E.
+   This is used to get something to pass to execve.  */
+
+char **
+environ_vector (e)
+     struct environ *e;
+{
+  return e->vector;
+}
+
+/* Return the value in environment E of variable VAR.  */
+
+char *
+get_in_environ (e, var)
+     const struct environ *e;
+     const char *var;
+{
+  register int len = strlen (var);
+  register char **vector = e->vector;
+  register char *s;
+
+  for (; (s = *vector) != NULL; vector++)
+    if (STREQN (s, var, len) && s[len] == '=')
+      return &s[len + 1];
+
+  return 0;
+}
+
+/* Store the value in E of VAR as VALUE.  */
+
+void
+set_in_environ (e, var, value)
+     struct environ *e;
+     const char *var;
+     const char *value;
+{
+  register int i;
+  register int len = strlen (var);
+  register char **vector = e->vector;
+  register char *s;
+
+  for (i = 0; (s = vector[i]) != NULL; i++)
+    if (STREQN (s, var, len) && s[len] == '=')
+      break;
+
+  if (s == 0)
+    {
+      if (i == e->allocated)
+	{
+	  e->allocated += 10;
+	  vector = (char **) xrealloc ((char *)vector,
+				       (e->allocated + 1) * sizeof (char *));
+	  e->vector = vector;
+	}
+      vector[i + 1] = 0;
+    }
+  else
+    free (s);
+
+  s = (char *) xmalloc (len + strlen (value) + 2);
+  strcpy (s, var);
+  strcat (s, "=");
+  strcat (s, value);
+  vector[i] = s;
+
+  /* This used to handle setting the PATH and GNUTARGET variables
+     specially.  The latter has been replaced by "set gnutarget"
+     (which has worked since GDB 4.11).  The former affects searching
+     the PATH to find SHELL, and searching the PATH to find the
+     argument of "symbol-file" or "exec-file".  Maybe we should have
+     some kind of "set exec-path" for that.  But in any event, having
+     "set env" affect anything besides the inferior is a bad idea.
+     What if we want to change the environment we pass to the program
+     without afecting GDB's behavior?  */
+
+  return;
+}
+
+/* Remove the setting for variable VAR from environment E.  */
+
+void
+unset_in_environ (e, var)
+     struct environ *e;
+     char *var;
+{
+  register int len = strlen (var);
+  register char **vector = e->vector;
+  register char *s;
+
+  for (; (s = *vector) != NULL; vector++)
+    {
+      if (STREQN (s, var, len) && s[len] == '=')
+	{
+	  free (s);
+	  /* Walk through the vector, shuffling args down by one, including
+	     the NULL terminator.  Can't use memcpy() here since the regions
+	     overlap, and memmove() might not be available. */
+	  while ((vector[0] = vector[1]) != NULL)
+	    {
+	      vector++;
+	    }
+	  break;
+	}
+    }
+}
diff --git a/gdb/environ.h b/gdb/environ.h
new file mode 100644
index 0000000..87a538a
--- /dev/null
+++ b/gdb/environ.h
@@ -0,0 +1,58 @@
+/* Header for environment manipulation library.
+   Copyright 1989, 1992 Free Software Foundation.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (ENVIRON_H)
+#define ENVIRON_H 1
+
+/* We manipulate environments represented as these structures.  */
+
+struct environ
+{
+  /* Number of usable slots allocated in VECTOR.
+     VECTOR always has one slot not counted here,
+     to hold the terminating zero.  */
+  int allocated;
+  /* A vector of slots, ALLOCATED + 1 of them.
+     The first few slots contain strings "VAR=VALUE"
+     and the next one contains zero.
+     Then come some unused slots.  */
+  char **vector;
+};
+
+extern struct environ *
+make_environ PARAMS ((void));
+
+extern void
+free_environ PARAMS ((struct environ *));
+
+extern void
+init_environ PARAMS ((struct environ *));
+
+extern char *
+get_in_environ PARAMS ((const struct environ *, const char *));
+
+extern void
+set_in_environ PARAMS ((struct environ *, const char *,
+			const char *));
+
+extern void
+unset_in_environ PARAMS ((struct environ *, char *));
+
+extern char **
+environ_vector PARAMS ((struct environ *));
+
+#endif	/* defined (ENVIRON_H) */
diff --git a/gdb/eval.c b/gdb/eval.c
new file mode 100644
index 0000000..d3c3465
--- /dev/null
+++ b/gdb/eval.c
@@ -0,0 +1,1989 @@
+/* Evaluate expressions for GDB.
+   Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "expression.h"
+#include "target.h"
+#include "frame.h"
+#include "demangle.h"
+#include "language.h"	/* For CAST_IS_CONVERSION */
+#include "f-lang.h"	/* for array bound stuff */
+
+/* Defined in symtab.c */ 
+extern int hp_som_som_object_present;
+
+/* This is defined in valops.c */ 
+extern int overload_resolution;
+
+
+/* Prototypes for local functions. */
+
+static value_ptr evaluate_subexp_for_sizeof PARAMS ((struct expression *,
+						     int *));
+
+static value_ptr evaluate_subexp_for_address PARAMS ((struct expression *,
+						      int *, enum noside));
+
+static value_ptr evaluate_subexp PARAMS ((struct type *, struct expression *,
+					  int *, enum noside));
+
+static char *get_label PARAMS ((struct expression *, int *));
+
+static value_ptr
+evaluate_struct_tuple PARAMS ((value_ptr, struct expression *, int *,
+			       enum noside, int));
+
+static LONGEST
+init_array_element PARAMS ((value_ptr, value_ptr, struct expression *,
+			    int *, enum noside, LONGEST, LONGEST));
+
+#ifdef __GNUC__
+inline
+#endif
+static value_ptr
+evaluate_subexp (expect_type, exp, pos, noside)
+     struct type *expect_type;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  return (*exp->language_defn->evaluate_exp) (expect_type, exp, pos, noside);
+}
+
+/* Parse the string EXP as a C expression, evaluate it,
+   and return the result as a number.  */
+
+CORE_ADDR
+parse_and_eval_address (exp)
+     char *exp;
+{
+  struct expression *expr = parse_expression (exp);
+  register CORE_ADDR addr;
+  register struct cleanup *old_chain = 
+      make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+  addr = value_as_pointer (evaluate_expression (expr));
+  do_cleanups (old_chain);
+  return addr;
+}
+
+/* Like parse_and_eval_address but takes a pointer to a char * variable
+   and advanced that variable across the characters parsed.  */
+
+CORE_ADDR
+parse_and_eval_address_1 (expptr)
+     char **expptr;
+{
+  struct expression *expr = parse_exp_1 (expptr, (struct block *)0, 0);
+  register CORE_ADDR addr;
+  register struct cleanup *old_chain =
+      make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+  addr = value_as_pointer (evaluate_expression (expr));
+  do_cleanups (old_chain);
+  return addr;
+}
+
+value_ptr
+parse_and_eval (exp)
+     char *exp;
+{
+  struct expression *expr = parse_expression (exp);
+  register value_ptr val;
+  register struct cleanup *old_chain
+    = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+  val = evaluate_expression (expr);
+  do_cleanups (old_chain);
+  return val;
+}
+
+/* Parse up to a comma (or to a closeparen)
+   in the string EXPP as an expression, evaluate it, and return the value.
+   EXPP is advanced to point to the comma.  */
+
+value_ptr
+parse_to_comma_and_eval (expp)
+     char **expp;
+{
+  struct expression *expr = parse_exp_1 (expp, (struct block *) 0, 1);
+  register value_ptr val;
+  register struct cleanup *old_chain
+    = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+  val = evaluate_expression (expr);
+  do_cleanups (old_chain);
+  return val;
+}
+
+/* Evaluate an expression in internal prefix form
+   such as is constructed by parse.y.
+
+   See expression.h for info on the format of an expression.  */
+
+value_ptr
+evaluate_expression (exp)
+     struct expression *exp;
+{
+  int pc = 0;
+  return evaluate_subexp (NULL_TYPE, exp, &pc, EVAL_NORMAL);
+}
+
+/* Evaluate an expression, avoiding all memory references
+   and getting a value whose type alone is correct.  */
+
+value_ptr
+evaluate_type (exp)
+     struct expression *exp;
+{
+  int pc = 0;
+  return evaluate_subexp (NULL_TYPE, exp, &pc, EVAL_AVOID_SIDE_EFFECTS);
+}
+
+/* If the next expression is an OP_LABELED, skips past it,
+   returning the label.  Otherwise, does nothing and returns NULL. */
+
+static char*
+get_label (exp, pos)
+     register struct expression *exp;
+     int *pos;
+{
+  if (exp->elts[*pos].opcode == OP_LABELED)
+    {
+      int pc = (*pos)++;
+      char *name = &exp->elts[pc + 2].string;
+      int tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      return name;
+    }
+  else
+    return NULL;
+}
+
+/* This function evaluates tupes (in Chill) or brace-initializers
+   (in C/C++) for structure types.  */
+
+static value_ptr
+evaluate_struct_tuple (struct_val, exp, pos, noside, nargs)
+     value_ptr struct_val;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+     int nargs;
+{
+  struct type *struct_type = check_typedef (VALUE_TYPE (struct_val));
+  struct type *substruct_type = struct_type;
+  struct type *field_type;
+  int fieldno = -1;
+  int variantno = -1;
+  int subfieldno = -1;
+   while (--nargs >= 0)
+    {
+      int pc = *pos;
+      value_ptr val = NULL;
+      int nlabels = 0;
+      int bitpos, bitsize;
+      char *addr;
+      
+      /* Skip past the labels, and count them. */
+      while (get_label (exp, pos) != NULL)
+	nlabels++;
+
+      do
+	{
+	  char *label = get_label (exp, &pc);
+	  if (label)
+	    {
+	      for (fieldno = 0; fieldno < TYPE_NFIELDS (struct_type);
+		   fieldno++)
+		{
+		  char *field_name = TYPE_FIELD_NAME (struct_type, fieldno);
+		  if (field_name != NULL && STREQ (field_name, label))
+		    {
+		      variantno = -1;
+		      subfieldno = fieldno;
+		      substruct_type = struct_type;
+		      goto found;
+		    }
+		}
+	      for (fieldno = 0; fieldno < TYPE_NFIELDS (struct_type);
+		   fieldno++)
+		{
+		  char *field_name = TYPE_FIELD_NAME (struct_type, fieldno);
+		  field_type = TYPE_FIELD_TYPE (struct_type, fieldno);
+		  if ((field_name == 0 || *field_name == '\0')
+		      && TYPE_CODE (field_type) == TYPE_CODE_UNION)
+		    {
+		      variantno = 0;
+		      for (; variantno < TYPE_NFIELDS (field_type);
+			   variantno++)
+			{
+			  substruct_type
+			    = TYPE_FIELD_TYPE (field_type, variantno);
+			  if (TYPE_CODE (substruct_type) == TYPE_CODE_STRUCT)
+			    { 
+			      for (subfieldno = 0;
+				   subfieldno < TYPE_NFIELDS (substruct_type);
+				   subfieldno++)
+				{
+				  if (STREQ (TYPE_FIELD_NAME (substruct_type,
+							      subfieldno),
+					     label))
+				    {
+				      goto found;
+				    }
+				}
+			    }
+			}
+		    }
+		}
+	      error ("there is no field named %s", label);
+	    found:
+	      ;
+	    }
+	  else
+	    {
+	      /* Unlabelled tuple element - go to next field. */
+	      if (variantno >= 0)
+		{
+		  subfieldno++;
+		  if (subfieldno >= TYPE_NFIELDS (substruct_type))
+		    {
+		      variantno = -1;
+		      substruct_type = struct_type;
+		    }
+		}
+	      if (variantno < 0)
+		{
+		  fieldno++;
+		  subfieldno = fieldno;
+		  if (fieldno >= TYPE_NFIELDS (struct_type))
+		    error ("too many initializers");
+		  field_type = TYPE_FIELD_TYPE (struct_type, fieldno);
+		  if (TYPE_CODE (field_type) == TYPE_CODE_UNION
+		      && TYPE_FIELD_NAME (struct_type, fieldno)[0] == '0')
+		    error ("don't know which variant you want to set");
+		}
+	    }
+
+	  /* Here, struct_type is the type of the inner struct,
+	     while substruct_type is the type of the inner struct.
+	     These are the same for normal structures, but a variant struct
+	     contains anonymous union fields that contain substruct fields.
+	     The value fieldno is the index of the top-level (normal or
+	     anonymous union) field in struct_field, while the value
+	     subfieldno is the index of the actual real (named inner) field
+	     in substruct_type. */
+
+	  field_type = TYPE_FIELD_TYPE (substruct_type, subfieldno);
+	  if (val == 0)
+	    val = evaluate_subexp (field_type, exp, pos, noside);
+
+	  /* Now actually set the field in struct_val. */
+
+	  /* Assign val to field fieldno. */
+	  if (VALUE_TYPE (val) != field_type)
+	    val = value_cast (field_type, val);
+
+	  bitsize = TYPE_FIELD_BITSIZE (substruct_type, subfieldno);
+	  bitpos = TYPE_FIELD_BITPOS (struct_type, fieldno);
+	  if (variantno >= 0)
+	    bitpos += TYPE_FIELD_BITPOS (substruct_type, subfieldno);
+	  addr = VALUE_CONTENTS (struct_val) + bitpos / 8;
+	  if (bitsize)
+	    modify_field (addr, value_as_long (val),
+			  bitpos % 8, bitsize);
+	  else
+	    memcpy (addr, VALUE_CONTENTS (val),
+		    TYPE_LENGTH (VALUE_TYPE (val)));
+	} while (--nlabels > 0);
+    }
+  return struct_val;
+}
+
+/* Recursive helper function for setting elements of array tuples for Chill.
+   The target is ARRAY (which has bounds LOW_BOUND to HIGH_BOUND);
+   the element value is ELEMENT;
+   EXP, POS and NOSIDE are as usual.
+   Evaluates index expresions and sets the specified element(s) of
+   ARRAY to ELEMENT.
+   Returns last index value.  */
+
+static LONGEST
+init_array_element (array, element, exp, pos, noside, low_bound, high_bound)
+     value_ptr array, element;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+     LONGEST low_bound, high_bound;
+{
+  LONGEST index;
+  int element_size = TYPE_LENGTH (VALUE_TYPE (element));
+  if (exp->elts[*pos].opcode == BINOP_COMMA)
+    {
+      (*pos)++;
+      init_array_element (array, element, exp, pos, noside,
+			  low_bound, high_bound);
+      return init_array_element (array, element,
+				 exp, pos, noside, low_bound, high_bound);
+    }
+  else if (exp->elts[*pos].opcode == BINOP_RANGE)
+    {
+      LONGEST low, high;
+      (*pos)++;
+      low = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+      high = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+      if (low < low_bound || high > high_bound)
+	error ("tuple range index out of range");
+      for (index = low ; index <= high; index++)
+	{
+	  memcpy (VALUE_CONTENTS_RAW (array)
+		  + (index - low_bound) * element_size,
+		  VALUE_CONTENTS (element), element_size);
+	}
+    }
+  else
+    {
+      index = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+      if (index < low_bound || index > high_bound)
+	error ("tuple index out of range");
+      memcpy (VALUE_CONTENTS_RAW (array) + (index - low_bound) * element_size,
+	      VALUE_CONTENTS (element), element_size);
+    }
+  return index;
+}
+
+value_ptr
+evaluate_subexp_standard (expect_type, exp, pos, noside)
+     struct type *expect_type;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  enum exp_opcode op;
+  int tem, tem2, tem3;
+  register int pc, pc2 = 0, oldpos;
+  register value_ptr arg1 = NULL, arg2 = NULL, arg3;
+  struct type *type;
+  int nargs;
+  value_ptr *argvec;
+  int upper, lower, retcode; 
+  int code;
+  int ix;
+  long mem_offset;
+  struct symbol * sym;
+  struct type ** arg_types;
+  int save_pos1;
+
+  /* This expect_type crap should not be used for C.  C expressions do
+     not have any notion of expected types, never has and (goddess
+     willing) never will.  The C++ code uses it for some twisted
+     purpose (I haven't investigated but I suspect it just the usual
+     combination of Stroustrup figuring out some crazy language
+     feature and Tiemann figuring out some crazier way to try to
+     implement it).  CHILL has the tuple stuff; I don't know enough
+     about CHILL to know whether expected types is the way to do it.
+     FORTRAN I don't know.  */
+  if (exp->language_defn->la_language != language_cplus
+      && exp->language_defn->la_language != language_chill)
+    expect_type = NULL_TYPE;
+
+  pc = (*pos)++;
+  op = exp->elts[pc].opcode;
+
+  switch (op)
+    {
+    case OP_SCOPE:
+      tem = longest_to_int (exp->elts[pc + 2].longconst);
+      (*pos) += 4 + BYTES_TO_EXP_ELEM (tem + 1);
+      arg1 = value_struct_elt_for_reference (exp->elts[pc + 1].type,
+					     0,
+					     exp->elts[pc + 1].type,
+					     &exp->elts[pc + 3].string,
+					     expect_type);
+      if (arg1 == NULL)
+	error ("There is no field named %s", &exp->elts[pc + 3].string);
+      return arg1;
+
+    case OP_LONG:
+      (*pos) += 3;
+      return value_from_longest (exp->elts[pc + 1].type,
+				 exp->elts[pc + 2].longconst);
+
+    case OP_DOUBLE:
+      (*pos) += 3;
+      return value_from_double (exp->elts[pc + 1].type,
+				exp->elts[pc + 2].doubleconst);
+
+    case OP_VAR_VALUE:
+      (*pos) += 3;
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  struct symbol * sym = exp->elts[pc + 2].symbol;
+	  enum lval_type lv;
+
+	  switch (SYMBOL_CLASS (sym))
+	    {
+	    case LOC_CONST:
+	    case LOC_LABEL:
+	    case LOC_CONST_BYTES:
+	      lv = not_lval;
+	      break;
+
+	    case LOC_REGISTER:
+	    case LOC_REGPARM:
+	      lv = lval_register;
+	      break;
+
+	    default:
+	      lv = lval_memory;
+	      break;
+	    }
+
+	  return value_zero (SYMBOL_TYPE (sym), lv);
+	}
+      else
+	return value_of_variable (exp->elts[pc + 2].symbol,
+				  exp->elts[pc + 1].block);
+
+    case OP_LAST:
+      (*pos) += 2;
+      return
+	access_value_history (longest_to_int (exp->elts[pc + 1].longconst));
+
+    case OP_REGISTER:
+      {
+	int regno     = longest_to_int (exp->elts[pc + 1].longconst);
+	value_ptr val = value_of_register (regno);
+
+	(*pos) += 2;
+	if (val == NULL)
+	  error ("Value of register %s not available.", REGISTER_NAME (regno));
+	else
+	  return val;
+      }
+    case OP_BOOL:
+      (*pos) += 2;
+      return value_from_longest (LA_BOOL_TYPE,
+				   exp->elts[pc + 1].longconst);
+
+    case OP_INTERNALVAR:
+      (*pos) += 2;
+      return value_of_internalvar (exp->elts[pc + 1].internalvar);
+
+    case OP_STRING:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return value_string (&exp->elts[pc + 2].string, tem);
+
+    case OP_BITSTRING:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos)
+	+= 3 + BYTES_TO_EXP_ELEM ((tem + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return value_bitstring (&exp->elts[pc + 2].string, tem);
+      break;
+
+    case OP_ARRAY:
+      (*pos) += 3;
+      tem2 = longest_to_int (exp->elts[pc + 1].longconst);
+      tem3 = longest_to_int (exp->elts[pc + 2].longconst);
+      nargs = tem3 - tem2 + 1;
+      type = expect_type ? check_typedef (expect_type) : NULL_TYPE;
+
+      if (expect_type != NULL_TYPE && noside != EVAL_SKIP
+	  && TYPE_CODE (type) == TYPE_CODE_STRUCT)
+	{
+	  value_ptr rec = allocate_value (expect_type);
+	  memset (VALUE_CONTENTS_RAW (rec), '\0', TYPE_LENGTH (type));
+	  return evaluate_struct_tuple (rec, exp, pos, noside, nargs);
+	}
+
+      if (expect_type != NULL_TYPE && noside != EVAL_SKIP
+	  && TYPE_CODE (type) == TYPE_CODE_ARRAY)
+	{
+	  struct type *range_type = TYPE_FIELD_TYPE (type, 0);
+	  struct type *element_type = TYPE_TARGET_TYPE (type);
+	  value_ptr array = allocate_value (expect_type);
+	  int element_size = TYPE_LENGTH (check_typedef (element_type));
+	  LONGEST low_bound, high_bound, index;
+	  if (get_discrete_bounds (range_type, &low_bound, &high_bound) < 0)
+	    {
+	      low_bound = 0;
+	      high_bound = (TYPE_LENGTH (type) / element_size) - 1;
+	    }
+	  index = low_bound;
+	  memset (VALUE_CONTENTS_RAW (array), 0, TYPE_LENGTH (expect_type));
+	  for (tem = nargs;  --nargs >= 0;  )
+	    {
+	      value_ptr element;
+	      int index_pc = 0;
+	      if (exp->elts[*pos].opcode == BINOP_RANGE)
+		{
+		  index_pc = ++(*pos);
+		  evaluate_subexp (NULL_TYPE, exp, pos, EVAL_SKIP);
+		}
+	      element = evaluate_subexp (element_type, exp, pos, noside);
+	      if (VALUE_TYPE (element) != element_type)
+		element = value_cast (element_type, element);
+	      if (index_pc)
+		{
+		  int continue_pc = *pos;
+		  *pos = index_pc;
+		  index = init_array_element (array, element, exp, pos, noside,
+					      low_bound, high_bound);
+		  *pos = continue_pc;
+		}
+	      else
+		{
+		  if (index > high_bound)
+		    /* to avoid memory corruption */
+		    error ("Too many array elements");
+		  memcpy (VALUE_CONTENTS_RAW (array)
+			  + (index - low_bound) * element_size,
+			  VALUE_CONTENTS (element),
+			  element_size);
+		}
+	      index++;
+	    }
+	  return array;
+	}
+
+      if (expect_type != NULL_TYPE && noside != EVAL_SKIP
+	  && TYPE_CODE (type) == TYPE_CODE_SET)
+	{
+	  value_ptr set = allocate_value (expect_type);
+	  char *valaddr = VALUE_CONTENTS_RAW (set);
+	  struct type *element_type = TYPE_INDEX_TYPE (type);
+	  struct type *check_type = element_type;
+	  LONGEST low_bound, high_bound;
+
+	  /* get targettype of elementtype */
+	  while (TYPE_CODE (check_type) == TYPE_CODE_RANGE ||
+		 TYPE_CODE (check_type) == TYPE_CODE_TYPEDEF)
+	    check_type = TYPE_TARGET_TYPE (check_type);
+
+	  if (get_discrete_bounds (element_type, &low_bound, &high_bound) < 0)
+	    error ("(power)set type with unknown size");
+	  memset (valaddr, '\0', TYPE_LENGTH (type));
+	  for (tem = 0; tem < nargs; tem++)
+	    {
+	      LONGEST range_low, range_high;
+	      struct type *range_low_type, *range_high_type;
+	      value_ptr elem_val;
+	      if (exp->elts[*pos].opcode == BINOP_RANGE)
+		{
+		  (*pos)++;
+		  elem_val = evaluate_subexp (element_type, exp, pos, noside);
+		  range_low_type = VALUE_TYPE (elem_val);
+		  range_low = value_as_long (elem_val);
+		  elem_val = evaluate_subexp (element_type, exp, pos, noside);
+		  range_high_type = VALUE_TYPE (elem_val);
+		  range_high = value_as_long (elem_val);
+		}
+	      else
+		{
+		  elem_val = evaluate_subexp (element_type, exp, pos, noside);
+		  range_low_type = range_high_type = VALUE_TYPE (elem_val);
+		  range_low = range_high = value_as_long (elem_val);
+		}
+	      /* check types of elements to avoid mixture of elements from
+		 different types. Also check if type of element is "compatible"
+		 with element type of powerset */
+	      if (TYPE_CODE (range_low_type) == TYPE_CODE_RANGE)
+		range_low_type = TYPE_TARGET_TYPE (range_low_type);
+	      if (TYPE_CODE (range_high_type) == TYPE_CODE_RANGE)
+		range_high_type = TYPE_TARGET_TYPE (range_high_type);
+	      if ((TYPE_CODE (range_low_type) != TYPE_CODE (range_high_type)) ||
+		  (TYPE_CODE (range_low_type) == TYPE_CODE_ENUM &&
+		   (range_low_type != range_high_type)))
+		/* different element modes */
+		error ("POWERSET tuple elements of different mode");
+	      if ((TYPE_CODE (check_type) != TYPE_CODE (range_low_type)) ||
+		  (TYPE_CODE (check_type) == TYPE_CODE_ENUM &&
+		   range_low_type != check_type))
+		error ("incompatible POWERSET tuple elements");
+	      if (range_low > range_high)
+		{
+		  warning ("empty POWERSET tuple range");
+		  continue;
+		}
+	      if (range_low < low_bound || range_high > high_bound)
+		error ("POWERSET tuple element out of range");
+	      range_low -= low_bound;
+	      range_high -= low_bound;
+	      for ( ; range_low <= range_high; range_low++)
+		{
+		  int bit_index = (unsigned) range_low % TARGET_CHAR_BIT;
+		  if (BITS_BIG_ENDIAN)
+		    bit_index = TARGET_CHAR_BIT - 1 - bit_index;
+		  valaddr [(unsigned) range_low / TARGET_CHAR_BIT]
+		    |= 1 << bit_index;
+		}
+	    }
+	  return set;
+	}
+
+      argvec = (value_ptr *) alloca (sizeof (value_ptr) * nargs);
+      for (tem = 0; tem < nargs; tem++)
+	{
+	  /* Ensure that array expressions are coerced into pointer objects. */
+	  argvec[tem] = evaluate_subexp_with_coercion (exp, pos, noside);
+	}
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return value_array (tem2, tem3, argvec);
+
+    case TERNOP_SLICE:
+      {
+	value_ptr array = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	int lowbound
+	  = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+	int upper
+	  = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+	if (noside == EVAL_SKIP)
+	  goto nosideret;
+	return value_slice (array, lowbound, upper - lowbound + 1);
+      }
+
+    case TERNOP_SLICE_COUNT:
+      {
+	value_ptr array = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	int lowbound
+	  = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+	int length
+	  = value_as_long (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+	return value_slice (array, lowbound, length);
+      }
+
+    case TERNOP_COND:
+      /* Skip third and second args to evaluate the first one.  */
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (value_logical_not (arg1))
+	{
+	  evaluate_subexp (NULL_TYPE, exp, pos, EVAL_SKIP);
+	  return evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	}
+      else
+	{
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  evaluate_subexp (NULL_TYPE, exp, pos, EVAL_SKIP);
+	  return arg2;
+	}
+
+    case OP_FUNCALL:
+      (*pos) += 2;
+      op = exp->elts[*pos].opcode;
+      nargs = longest_to_int (exp->elts[pc + 1].longconst);
+      /* Allocate arg vector, including space for the function to be
+	 called in argvec[0] and a terminating NULL */
+      argvec = (value_ptr *) alloca (sizeof (value_ptr) * (nargs + 3));
+      if (op == STRUCTOP_MEMBER || op == STRUCTOP_MPTR)
+	{
+	  LONGEST fnptr;
+
+          /* 1997-08-01 Currently we do not support function invocation
+             via pointers-to-methods with HP aCC. Pointer does not point
+             to the function, but possibly to some thunk. */
+          if (hp_som_som_object_present)
+            {
+              error ("Not implemented: function invocation through pointer to method with HP aCC");
+            }
+
+	  nargs++;
+	  /* First, evaluate the structure into arg2 */
+	  pc2 = (*pos)++;
+
+	  if (noside == EVAL_SKIP)
+	    goto nosideret;
+
+	  if (op == STRUCTOP_MEMBER)
+	    {
+	      arg2 = evaluate_subexp_for_address (exp, pos, noside);
+	    }
+	  else
+	    {
+	      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	    }
+
+	  /* If the function is a virtual function, then the
+	     aggregate value (providing the structure) plays
+	     its part by providing the vtable.  Otherwise,
+	     it is just along for the ride: call the function
+	     directly.  */
+
+	  arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+
+	  fnptr = value_as_long (arg1);
+
+	  if (METHOD_PTR_IS_VIRTUAL(fnptr))
+	    {
+	      int fnoffset = METHOD_PTR_TO_VOFFSET(fnptr);
+	      struct type *basetype;
+	      struct type *domain_type =
+		  TYPE_DOMAIN_TYPE (TYPE_TARGET_TYPE (VALUE_TYPE (arg1)));
+	      int i, j;
+	      basetype = TYPE_TARGET_TYPE (VALUE_TYPE (arg2));
+	      if (domain_type != basetype)
+		  arg2 = value_cast(lookup_pointer_type (domain_type), arg2);
+	      basetype = TYPE_VPTR_BASETYPE (domain_type);
+	      for (i = TYPE_NFN_FIELDS (basetype) - 1; i >= 0; i--)
+		{
+		  struct fn_field *f = TYPE_FN_FIELDLIST1 (basetype, i);
+		  /* If one is virtual, then all are virtual.  */
+		  if (TYPE_FN_FIELD_VIRTUAL_P (f, 0))
+		    for (j = TYPE_FN_FIELDLIST_LENGTH (basetype, i) - 1; j >= 0; --j)
+		      if ((int) TYPE_FN_FIELD_VOFFSET (f, j) == fnoffset)
+			{
+			  value_ptr temp = value_ind (arg2);
+			  arg1 = value_virtual_fn_field (&temp, f, j, domain_type, 0);
+			  arg2 = value_addr (temp);
+			  goto got_it;
+			}
+		}
+	      if (i < 0)
+		error ("virtual function at index %d not found", fnoffset);
+	    }
+	  else
+	    {
+	      VALUE_TYPE (arg1) = lookup_pointer_type (TYPE_TARGET_TYPE (VALUE_TYPE (arg1)));
+	    }
+	got_it:
+
+	  /* Now, say which argument to start evaluating from */
+	  tem = 2;
+	}
+      else if (op == STRUCTOP_STRUCT || op == STRUCTOP_PTR)
+	{
+	  /* Hair for method invocations */
+	  int tem2;
+
+	  nargs++;
+	  /* First, evaluate the structure into arg2 */
+	  pc2 = (*pos)++;
+	  tem2 = longest_to_int (exp->elts[pc2 + 1].longconst);
+	  *pos += 3 + BYTES_TO_EXP_ELEM (tem2 + 1);
+	  if (noside == EVAL_SKIP)
+	    goto nosideret;
+
+	  if (op == STRUCTOP_STRUCT)
+	    {
+	      /* If v is a variable in a register, and the user types
+		 v.method (), this will produce an error, because v has
+		 no address.
+
+		 A possible way around this would be to allocate a
+		 copy of the variable on the stack, copy in the
+		 contents, call the function, and copy out the
+		 contents.  I.e. convert this from call by reference
+		 to call by copy-return (or whatever it's called).
+		 However, this does not work because it is not the
+		 same: the method being called could stash a copy of
+		 the address, and then future uses through that address
+		 (after the method returns) would be expected to
+		 use the variable itself, not some copy of it.  */
+	      arg2 = evaluate_subexp_for_address (exp, pos, noside);
+	    }
+	  else
+	    {
+	      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	    }
+	  /* Now, say which argument to start evaluating from */
+	  tem = 2;
+	}
+      else
+	{
+	  /* Non-method function call */
+	  save_pos1 = *pos;
+	  argvec[0] = evaluate_subexp_with_coercion (exp, pos, noside);
+	  tem = 1;
+	  type = VALUE_TYPE (argvec[0]);
+	  if (type && TYPE_CODE (type) == TYPE_CODE_PTR)
+	    type = TYPE_TARGET_TYPE (type);
+	  if (type && TYPE_CODE (type) == TYPE_CODE_FUNC)
+	    {
+	      for (; tem <= nargs && tem <= TYPE_NFIELDS (type); tem++)
+		{
+                  /* pai: FIXME This seems to be coercing arguments before
+                   * overload resolution has been done! */
+		  argvec[tem] = evaluate_subexp (TYPE_FIELD_TYPE (type, tem-1),
+						 exp, pos, noside);
+		}
+	    }
+	}
+
+      /* Evaluate arguments */
+      for (; tem <= nargs; tem++)
+	{
+	  /* Ensure that array expressions are coerced into pointer objects. */
+	  argvec[tem] = evaluate_subexp_with_coercion (exp, pos, noside);
+	}
+
+      /* signal end of arglist */
+      argvec[tem] = 0;
+
+      if (op == STRUCTOP_STRUCT || op == STRUCTOP_PTR)
+	{
+	  int static_memfuncp;
+	  value_ptr temp = arg2;
+	  char tstr[256];
+          struct fn_field * fns_ptr;
+          int num_fns;
+          struct type * basetype;
+          int boffset;
+
+          /* Method invocation : stuff "this" as first parameter */
+          /* pai: this used to have lookup_pointer_type for some reason,
+           * but temp is already a pointer to the object */
+	  argvec[1] = value_from_longest (VALUE_TYPE (temp),
+                                          VALUE_ADDRESS (temp)+VALUE_OFFSET (temp));
+          /* Name of method from expression */ 
+          strcpy(tstr, &exp->elts[pc2+2].string);
+          
+          if (overload_resolution && (exp->language_defn->la_language == language_cplus))
+            {
+              /* Language is C++, do some overload resolution before evaluation */
+              value_ptr valp = NULL;
+              
+              /* Prepare list of argument types for overload resolution */ 
+              arg_types = (struct type **) xmalloc (nargs * (sizeof (struct type *)));
+              for (ix=1; ix <= nargs; ix++)
+                arg_types[ix-1] = VALUE_TYPE (argvec[ix]);
+
+              (void) find_overload_match (arg_types, nargs, tstr,
+                                          1 /* method */, 0 /* strict match */,
+                                          arg2 /* the object */, NULL,
+                                          &valp, NULL, &static_memfuncp);
+
+
+              argvec[1] = arg2;  /* the ``this'' pointer */
+              argvec[0] = valp;  /* use the method found after overload resolution */ 
+            }
+          else /* Non-C++ case -- or no overload resolution */ 
+            {
+              temp = arg2;
+              argvec[0] = value_struct_elt (&temp, argvec+1, tstr,
+                                            &static_memfuncp,
+                                            op == STRUCTOP_STRUCT
+                                            ? "structure" : "structure pointer");
+              argvec[1] = arg2; /* the ``this'' pointer */
+            }
+
+	  if (static_memfuncp)
+	    {
+	      argvec[1] = argvec[0];
+	      nargs--;
+	      argvec++;
+	    }
+	}
+      else if (op == STRUCTOP_MEMBER || op == STRUCTOP_MPTR)
+	{
+	  argvec[1] = arg2;
+	  argvec[0] = arg1;
+	}
+      else
+        { 
+	  /* Non-member function being called */
+
+          if (overload_resolution && (exp->language_defn->la_language == language_cplus))
+            {
+              /* Language is C++, do some overload resolution before evaluation */
+             struct symbol * symp;
+
+              /* Prepare list of argument types for overload resolution */ 
+              arg_types = (struct type **) xmalloc (nargs * (sizeof (struct type *)));
+              for (ix=1; ix <= nargs; ix++)
+                arg_types[ix-1] = VALUE_TYPE (argvec[ix]);
+
+              (void) find_overload_match (arg_types, nargs, NULL /* no need for name */,
+                                          0 /* not method */, 0 /* strict match */,
+                                          NULL, exp->elts[5].symbol /* the function */,
+                                          NULL, &symp, NULL);
+              
+              /* Now fix the expression being evaluated */ 
+              exp->elts[5].symbol = symp;
+              argvec[0] = evaluate_subexp_with_coercion (exp, &save_pos1, noside);
+            } 
+          else
+            {
+              /* Not C++, or no overload resolution allowed */ 
+              /* nothing to be done; argvec already correctly set up */ 
+            }
+        }
+
+    do_call_it:
+
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  /* If the return type doesn't look like a function type, call an
+	     error.  This can happen if somebody tries to turn a variable into
+	     a function call. This is here because people often want to
+	     call, eg, strcmp, which gdb doesn't know is a function.  If
+	     gdb isn't asked for it's opinion (ie. through "whatis"),
+	     it won't offer it. */
+
+	  struct type *ftype =
+	    TYPE_TARGET_TYPE (VALUE_TYPE (argvec[0]));
+
+	  if (ftype)
+	    return allocate_value (TYPE_TARGET_TYPE (VALUE_TYPE (argvec[0])));
+	  else
+	    error ("Expression of type other than \"Function returning ...\" used as function");
+	}
+      if (argvec[0] == NULL)
+        error ("Cannot evaluate function -- may be inlined");
+      return call_function_by_hand (argvec[0], nargs, argvec + 1);
+      /* pai: FIXME save value from call_function_by_hand, then adjust pc by adjust_fn_pc if +ve  */
+
+    case OP_F77_UNDETERMINED_ARGLIST: 
+
+      /* Remember that in F77, functions, substring ops and 
+         array subscript operations cannot be disambiguated 
+         at parse time.  We have made all array subscript operations, 
+         substring operations as well as function calls  come here 
+         and we now have to discover what the heck this thing actually was.  
+	 If it is a function, we process just as if we got an OP_FUNCALL. */
+
+      nargs = longest_to_int (exp->elts[pc+1].longconst);
+      (*pos) += 2;
+
+      /* First determine the type code we are dealing with.  */ 
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      type = check_typedef (VALUE_TYPE (arg1));
+      code = TYPE_CODE (type);
+
+      switch (code) 
+	{
+	case TYPE_CODE_ARRAY:
+	  goto multi_f77_subscript;
+
+	case TYPE_CODE_STRING:
+	  goto op_f77_substr;
+
+	case TYPE_CODE_PTR:
+	case TYPE_CODE_FUNC:
+	  /* It's a function call. */
+	  /* Allocate arg vector, including space for the function to be
+	     called in argvec[0] and a terminating NULL */
+	  argvec = (value_ptr *) alloca (sizeof (value_ptr) * (nargs + 2));
+	  argvec[0] = arg1;
+	  tem = 1;
+	  for (; tem <= nargs; tem++)
+	    argvec[tem] = evaluate_subexp_with_coercion (exp, pos, noside);
+	  argvec[tem] = 0; /* signal end of arglist */
+	  goto do_call_it;
+
+	default:
+              error ("Cannot perform substring on this type"); 
+	}
+
+    op_f77_substr:
+      /* We have a substring operation on our hands here, 
+         let us get the string we will be dealing with */
+
+      /* Now evaluate the 'from' and 'to' */
+
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+
+      if (nargs < 2)
+	return value_subscript (arg1, arg2);
+
+      arg3 = evaluate_subexp_with_coercion (exp, pos, noside);
+
+      if (noside == EVAL_SKIP)
+        goto nosideret;
+      
+      tem2 = value_as_long (arg2);
+      tem3 = value_as_long (arg3);
+      
+      return value_slice (arg1, tem2, tem3 - tem2 + 1);
+
+    case OP_COMPLEX:
+      /* We have a complex number, There should be 2 floating 
+	 point numbers that compose it */ 
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside); 
+
+      return value_literal_complex (arg1, arg2, builtin_type_f_complex_s16);
+
+    case STRUCTOP_STRUCT:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	return value_zero (lookup_struct_elt_type (VALUE_TYPE (arg1),
+						   &exp->elts[pc + 2].string,
+						   0),
+			   lval_memory);
+      else
+	{
+	  value_ptr temp = arg1;
+	  return value_struct_elt (&temp, NULL, &exp->elts[pc + 2].string,
+				   NULL, "structure");
+	}
+
+    case STRUCTOP_PTR:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	return value_zero (lookup_struct_elt_type (VALUE_TYPE (arg1),
+						   &exp->elts[pc + 2].string,
+						   0),
+			   lval_memory);
+      else
+	{
+	  value_ptr temp = arg1;
+	  return value_struct_elt (&temp, NULL, &exp->elts[pc + 2].string,
+				   NULL, "structure pointer");
+	}
+
+    case STRUCTOP_MEMBER:
+      arg1 = evaluate_subexp_for_address (exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+
+      /* With HP aCC, pointers to methods do not point to the function code */ 
+      if (hp_som_som_object_present &&
+          (TYPE_CODE (VALUE_TYPE (arg2)) == TYPE_CODE_PTR) &&
+          (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg2))) == TYPE_CODE_METHOD))
+        error ("Pointers to methods not supported with HP aCC"); /* 1997-08-19 */
+        
+      mem_offset = value_as_long (arg2);
+      goto handle_pointer_to_member;
+
+    case STRUCTOP_MPTR:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+
+      /* With HP aCC, pointers to methods do not point to the function code */ 
+      if (hp_som_som_object_present &&
+          (TYPE_CODE (VALUE_TYPE (arg2)) == TYPE_CODE_PTR) &&
+          (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg2))) == TYPE_CODE_METHOD))
+        error ("Pointers to methods not supported with HP aCC"); /* 1997-08-19 */
+
+      mem_offset = value_as_long (arg2);
+
+handle_pointer_to_member:
+      /* HP aCC generates offsets that have bit #29 set; turn it off to get
+         a real offset to the member. */
+      if (hp_som_som_object_present)
+        {
+          if (!mem_offset) /* no bias -> really null */ 
+            error ("Attempted dereference of null pointer-to-member");
+          mem_offset &= ~0x20000000;
+        }
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      type = check_typedef (VALUE_TYPE (arg2));
+      if (TYPE_CODE (type) != TYPE_CODE_PTR)
+	goto bad_pointer_to_member;
+      type = check_typedef (TYPE_TARGET_TYPE (type));
+      if (TYPE_CODE (type) == TYPE_CODE_METHOD)
+	error ("not implemented: pointer-to-method in pointer-to-member construct");
+      if (TYPE_CODE (type) != TYPE_CODE_MEMBER)
+	goto bad_pointer_to_member;
+      /* Now, convert these values to an address.  */
+      arg1 = value_cast (lookup_pointer_type (TYPE_DOMAIN_TYPE (type)),
+			 arg1);
+      arg3 = value_from_longest (lookup_pointer_type (TYPE_TARGET_TYPE (type)),
+				 value_as_long (arg1) + mem_offset);
+      return value_ind (arg3);
+bad_pointer_to_member:
+      error("non-pointer-to-member value used in pointer-to-member construct");
+
+    case BINOP_CONCAT:
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+	return value_concat (arg1, arg2);
+
+    case BINOP_ASSIGN:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+
+      /* Do special stuff for HP aCC pointers to members */ 
+      if (hp_som_som_object_present)
+        {
+          /* 1997-08-19 Can't assign HP aCC pointers to methods. No details of
+             the implementation yet; but the pointer appears to point to a code
+             sequence (thunk) in memory -- in any case it is *not* the address
+             of the function as it would be in a naive implementation. */ 
+          if ((TYPE_CODE (VALUE_TYPE (arg1)) == TYPE_CODE_PTR) &&
+              (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg1))) == TYPE_CODE_METHOD))
+            error ("Assignment to pointers to methods not implemented with HP aCC");
+
+          /* HP aCC pointers to data members require a constant bias */ 
+          if ((TYPE_CODE (VALUE_TYPE (arg1)) == TYPE_CODE_PTR) &&
+              (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg1))) == TYPE_CODE_MEMBER))
+              {
+                unsigned int * ptr = (unsigned int *) VALUE_CONTENTS (arg2); /* forces evaluation */ 
+                *ptr |= 0x20000000; /* set 29th bit */
+              }
+        }
+                                                    
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+	return value_assign (arg1, arg2);
+
+    case BINOP_ASSIGN_MODIFY:
+      (*pos) += 2;
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      op = exp->elts[pc + 1].opcode;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, BINOP_ASSIGN_MODIFY, op, noside);
+      else if (op == BINOP_ADD)
+	arg2 = value_add (arg1, arg2);
+      else if (op == BINOP_SUB)
+	arg2 = value_sub (arg1, arg2);
+      else
+	arg2 = value_binop (arg1, arg2, op);
+      return value_assign (arg1, arg2);
+
+    case BINOP_ADD:
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+	return value_add (arg1, arg2);
+
+    case BINOP_SUB:
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+	return value_sub (arg1, arg2);
+
+    case BINOP_MUL:
+    case BINOP_DIV:
+    case BINOP_REM:
+    case BINOP_MOD:
+    case BINOP_LSH:
+    case BINOP_RSH:
+    case BINOP_BITWISE_AND:
+    case BINOP_BITWISE_IOR:
+    case BINOP_BITWISE_XOR:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+	if (noside == EVAL_AVOID_SIDE_EFFECTS
+	    && (op == BINOP_DIV || op == BINOP_REM || op == BINOP_MOD))
+	  return value_zero (VALUE_TYPE (arg1), not_lval);
+      else
+	return value_binop (arg1, arg2, op);
+
+    case BINOP_RANGE:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      error ("':' operator used in invalid context");
+
+    case BINOP_SUBSCRIPT:
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+      else
+        {
+	  /* If the user attempts to subscript something that is not an
+	     array or pointer type (like a plain int variable for example),
+	     then report this as an error. */
+
+	  COERCE_REF (arg1);
+	  type = check_typedef (VALUE_TYPE (arg1));
+	  if (TYPE_CODE (type) != TYPE_CODE_ARRAY
+	      && TYPE_CODE (type) != TYPE_CODE_PTR)
+	    {
+	      if (TYPE_NAME (type))
+		error ("cannot subscript something of type `%s'",
+		       TYPE_NAME (type));
+	      else
+		error ("cannot subscript requested type");
+	    }
+
+	  if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	    return value_zero (TYPE_TARGET_TYPE (type), VALUE_LVAL (arg1));
+	  else
+	    return value_subscript (arg1, arg2);
+        }
+
+    case BINOP_IN:
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return value_in (arg1, arg2);
+      
+    case MULTI_SUBSCRIPT:
+      (*pos) += 2;
+      nargs = longest_to_int (exp->elts[pc + 1].longconst);
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      while (nargs-- > 0)
+	{
+	  arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+	  /* FIXME:  EVAL_SKIP handling may not be correct. */
+	  if (noside == EVAL_SKIP)
+	    {
+	      if (nargs > 0)
+		{
+		  continue;
+		}
+	      else
+		{
+		  goto nosideret;
+		}
+	    }
+	  /* FIXME:  EVAL_AVOID_SIDE_EFFECTS handling may not be correct. */
+	  if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	    {
+	      /* If the user attempts to subscript something that has no target
+		 type (like a plain int variable for example), then report this
+		 as an error. */
+	      
+	      type = TYPE_TARGET_TYPE (check_typedef (VALUE_TYPE (arg1)));
+	      if (type != NULL)
+		{
+		  arg1 = value_zero (type, VALUE_LVAL (arg1));
+		  noside = EVAL_SKIP;
+		  continue;
+		}
+	      else
+		{
+		  error ("cannot subscript something of type `%s'",
+			 TYPE_NAME (VALUE_TYPE (arg1)));
+		}
+	    }
+	  
+	  if (binop_user_defined_p (op, arg1, arg2))
+	    {
+	      arg1 = value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	    }
+	  else
+	    {
+	      arg1 = value_subscript (arg1, arg2);
+	    }
+	}
+      return (arg1);
+
+    multi_f77_subscript:
+      { 
+	int subscript_array[MAX_FORTRAN_DIMS+1]; /* 1-based array of 
+						    subscripts, max == 7 */
+	int array_size_array[MAX_FORTRAN_DIMS+1];
+	int ndimensions=1,i;
+	struct type *tmp_type; 
+	int offset_item;   /* The array offset where the item lives */ 
+
+	if (nargs > MAX_FORTRAN_DIMS)
+	  error ("Too many subscripts for F77 (%d Max)", MAX_FORTRAN_DIMS);
+
+	tmp_type = check_typedef (VALUE_TYPE (arg1));
+	ndimensions = calc_f77_array_dims (type);
+
+	if (nargs != ndimensions)
+	  error ("Wrong number of subscripts");
+
+	/* Now that we know we have a legal array subscript expression 
+	   let us actually find out where this element exists in the array. */ 
+
+	offset_item = 0; 
+	for (i = 1; i <= nargs; i++)
+	  {
+	    /* Evaluate each subscript, It must be a legal integer in F77 */ 
+	    arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+
+	    /* Fill in the subscript and array size arrays */ 
+
+	    subscript_array[i] = value_as_long (arg2);
+               
+	    retcode = f77_get_dynamic_upperbound (tmp_type, &upper);
+	    if (retcode == BOUND_FETCH_ERROR)
+	      error ("Cannot obtain dynamic upper bound"); 
+
+	    retcode = f77_get_dynamic_lowerbound (tmp_type, &lower); 
+	    if (retcode == BOUND_FETCH_ERROR)
+	      error("Cannot obtain dynamic lower bound"); 
+
+	    array_size_array[i] = upper - lower + 1;
+               
+	    /* Zero-normalize subscripts so that offsetting will work. */ 
+               
+	    subscript_array[i] -= lower;
+
+	    /* If we are at the bottom of a multidimensional 
+	       array type then keep a ptr to the last ARRAY
+	       type around for use when calling value_subscript()
+	       below. This is done because we pretend to value_subscript
+	       that we actually have a one-dimensional array 
+	       of base element type that we apply a simple 
+	       offset to. */ 
+
+	    if (i < nargs) 
+	      tmp_type = check_typedef (TYPE_TARGET_TYPE (tmp_type)); 
+	  }
+
+	/* Now let us calculate the offset for this item */
+
+	offset_item = subscript_array[ndimensions]; 
+         
+	for (i = ndimensions - 1; i >= 1; i--)
+	  offset_item = 
+	    array_size_array[i] * offset_item + subscript_array[i];
+
+	/* Construct a value node with the value of the offset */
+
+	arg2 = value_from_longest (builtin_type_f_integer, offset_item); 
+
+	/* Let us now play a dirty trick: we will take arg1 
+	   which is a value node pointing to the topmost level
+	   of the multidimensional array-set and pretend
+	   that it is actually a array of the final element 
+	   type, this will ensure that value_subscript()
+	   returns the correct type value */
+
+	VALUE_TYPE (arg1) = tmp_type; 
+	return value_ind (value_add (value_coerce_array (arg1), arg2));
+      }
+
+    case BINOP_LOGICAL_AND:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	{
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  goto nosideret;
+	}
+      
+      oldpos = *pos;
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, EVAL_AVOID_SIDE_EFFECTS);
+      *pos = oldpos;
+      
+      if (binop_user_defined_p (op, arg1, arg2)) 
+	{
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_logical_not (arg1);
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos,
+				  (tem ? EVAL_SKIP : noside));
+	  return value_from_longest (LA_BOOL_TYPE,
+				  (LONGEST) (!tem && !value_logical_not (arg2)));
+	}
+
+    case BINOP_LOGICAL_OR:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	{
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  goto nosideret;
+	}
+      
+      oldpos = *pos;
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, EVAL_AVOID_SIDE_EFFECTS);
+      *pos = oldpos;
+      
+      if (binop_user_defined_p (op, arg1, arg2)) 
+	{
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_logical_not (arg1);
+	  arg2 = evaluate_subexp (NULL_TYPE, exp, pos,
+				  (!tem ? EVAL_SKIP : noside));
+	  return value_from_longest (LA_BOOL_TYPE,
+				  (LONGEST) (!tem || !value_logical_not (arg2)));
+	}
+
+    case BINOP_EQUAL:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_equal (arg1, arg2);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) tem);
+	}
+
+    case BINOP_NOTEQUAL:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_equal (arg1, arg2);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) ! tem);
+	}
+
+    case BINOP_LESS:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_less (arg1, arg2);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) tem);
+	}
+
+    case BINOP_GTR:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_less (arg2, arg1);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) tem);
+	}
+
+    case BINOP_GEQ:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else
+	{
+	  tem = value_less (arg2, arg1) || value_equal (arg1, arg2);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) tem);
+	}
+
+    case BINOP_LEQ:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (VALUE_TYPE (arg1), exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (binop_user_defined_p (op, arg1, arg2))
+	{
+	  return value_x_binop (arg1, arg2, op, OP_NULL, noside);
+	}
+      else 
+	{
+	  tem = value_less (arg1, arg2) || value_equal (arg1, arg2);
+	  return value_from_longest (LA_BOOL_TYPE, (LONGEST) tem);
+	}
+
+    case BINOP_REPEAT:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      arg2 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      type = check_typedef (VALUE_TYPE (arg2));
+      if (TYPE_CODE (type) != TYPE_CODE_INT)
+	error ("Non-integral right operand for \"@\" operator.");
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  return allocate_repeat_value (VALUE_TYPE (arg1),
+					longest_to_int (value_as_long (arg2)));
+	}
+      else
+	return value_repeat (arg1, longest_to_int (value_as_long (arg2)));
+
+    case BINOP_COMMA:
+      evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      return evaluate_subexp (NULL_TYPE, exp, pos, noside);
+
+    case UNOP_NEG:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (unop_user_defined_p (op, arg1))
+	return value_x_unop (arg1, op, noside);
+      else
+	return value_neg (arg1);
+
+    case UNOP_COMPLEMENT:
+      /* C++: check for and handle destructor names.  */
+      op = exp->elts[*pos].opcode;
+
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (unop_user_defined_p (UNOP_COMPLEMENT, arg1))
+	return value_x_unop (arg1, UNOP_COMPLEMENT, noside);
+      else
+	return value_complement (arg1);
+
+    case UNOP_LOGICAL_NOT:
+      arg1 = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (unop_user_defined_p (op, arg1))
+	return value_x_unop (arg1, op, noside);
+      else
+	return value_from_longest (LA_BOOL_TYPE,
+				   (LONGEST) value_logical_not (arg1));
+
+    case UNOP_IND:
+      if (expect_type && TYPE_CODE (expect_type) == TYPE_CODE_PTR)
+        expect_type = TYPE_TARGET_TYPE (check_typedef (expect_type));
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if ((TYPE_TARGET_TYPE (VALUE_TYPE (arg1))) &&
+	  ((TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg1))) == TYPE_CODE_METHOD) ||
+	   (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (arg1))) == TYPE_CODE_MEMBER)))
+        error ("Attempt to dereference pointer to member without an object");
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (unop_user_defined_p (op, arg1))
+	return value_x_unop (arg1, op, noside);
+      else if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  type = check_typedef (VALUE_TYPE (arg1));
+	  if (TYPE_CODE (type) == TYPE_CODE_PTR
+	      || TYPE_CODE (type) == TYPE_CODE_REF
+	      /* In C you can dereference an array to get the 1st elt.  */
+	      || TYPE_CODE (type) == TYPE_CODE_ARRAY
+	      )
+	    return value_zero (TYPE_TARGET_TYPE (type),
+			       lval_memory);
+	  else if (TYPE_CODE (type) == TYPE_CODE_INT)
+	    /* GDB allows dereferencing an int.  */
+	    return value_zero (builtin_type_int, lval_memory);
+	  else
+	    error ("Attempt to take contents of a non-pointer value.");
+	}
+      return value_ind (arg1);
+
+    case UNOP_ADDR:
+      /* C++: check for and handle pointer to members.  */
+      
+      op = exp->elts[*pos].opcode;
+
+      if (noside == EVAL_SKIP)
+	{
+	  if (op == OP_SCOPE)
+	    {
+	      int temm = longest_to_int (exp->elts[pc+3].longconst);
+	      (*pos) += 3 + BYTES_TO_EXP_ELEM (temm + 1);
+	    }
+	  else
+	    evaluate_subexp (expect_type, exp, pos, EVAL_SKIP);
+	  goto nosideret;
+	}
+      else 
+        {
+          value_ptr retvalp = evaluate_subexp_for_address (exp, pos, noside);
+          /* If HP aCC object, use bias for pointers to members */ 
+          if (hp_som_som_object_present &&
+              (TYPE_CODE (VALUE_TYPE (retvalp)) == TYPE_CODE_PTR) &&
+              (TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (retvalp))) == TYPE_CODE_MEMBER))
+            {
+              unsigned int * ptr = (unsigned int *) VALUE_CONTENTS (retvalp); /* forces evaluation */
+              *ptr |= 0x20000000; /* set 29th bit */
+            }
+          return retvalp;
+        }
+      
+    case UNOP_SIZEOF:
+      if (noside == EVAL_SKIP)
+	{
+	  evaluate_subexp (NULL_TYPE, exp, pos, EVAL_SKIP);
+	  goto nosideret;
+	}
+      return evaluate_subexp_for_sizeof (exp, pos);
+
+    case UNOP_CAST:
+      (*pos) += 2;
+      type = exp->elts[pc + 1].type;
+      arg1 = evaluate_subexp (type, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (type != VALUE_TYPE (arg1))
+	arg1 = value_cast (type, arg1);
+      return arg1;
+
+    case UNOP_MEMVAL:
+      (*pos) += 2;
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	return value_zero (exp->elts[pc + 1].type, lval_memory);
+      else
+	return value_at_lazy (exp->elts[pc + 1].type,
+			      value_as_pointer (arg1),
+			      NULL);
+
+    case UNOP_PREINCREMENT:
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      else if (unop_user_defined_p (op, arg1))
+	{
+	  return value_x_unop (arg1, op, noside);
+	}
+      else
+	{
+	  arg2 = value_add (arg1, value_from_longest (builtin_type_char, 
+						   (LONGEST) 1));
+	  return value_assign (arg1, arg2);
+	}
+
+    case UNOP_PREDECREMENT:
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      else if (unop_user_defined_p (op, arg1))
+	{
+	  return value_x_unop (arg1, op, noside);
+	}
+      else
+	{
+	  arg2 = value_sub (arg1, value_from_longest (builtin_type_char, 
+						   (LONGEST) 1));
+	  return value_assign (arg1, arg2);
+	}
+
+    case UNOP_POSTINCREMENT:
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      else if (unop_user_defined_p (op, arg1))
+	{
+	  return value_x_unop (arg1, op, noside);
+	}
+      else
+	{
+	  arg2 = value_add (arg1, value_from_longest (builtin_type_char, 
+						   (LONGEST) 1));
+	  value_assign (arg1, arg2);
+	  return arg1;
+	}
+
+    case UNOP_POSTDECREMENT:
+      arg1 = evaluate_subexp (expect_type, exp, pos, noside);
+      if (noside == EVAL_SKIP || noside == EVAL_AVOID_SIDE_EFFECTS)
+	return arg1;
+      else if (unop_user_defined_p (op, arg1))
+	{
+	  return value_x_unop (arg1, op, noside);
+	}
+      else
+	{
+	  arg2 = value_sub (arg1, value_from_longest (builtin_type_char, 
+						   (LONGEST) 1));
+	  value_assign (arg1, arg2);
+	  return arg1;
+	}
+	
+    case OP_THIS:
+      (*pos) += 1;
+      return value_of_this (1);
+
+    case OP_TYPE:
+      error ("Attempt to use a type name as an expression");
+
+    default:
+      /* Removing this case and compiling with gcc -Wall reveals that
+	 a lot of cases are hitting this case.  Some of these should
+	 probably be removed from expression.h (e.g. do we need a BINOP_SCOPE
+	 and an OP_SCOPE?); others are legitimate expressions which are
+	 (apparently) not fully implemented.
+
+	 If there are any cases landing here which mean a user error,
+	 then they should be separate cases, with more descriptive
+	 error messages.  */
+
+      error ("\
+GDB does not (yet) know how to evaluate that kind of expression");
+    }
+
+ nosideret:
+  return value_from_longest (builtin_type_long, (LONGEST) 1);
+}
+
+/* Evaluate a subexpression of EXP, at index *POS,
+   and return the address of that subexpression.
+   Advance *POS over the subexpression.
+   If the subexpression isn't an lvalue, get an error.
+   NOSIDE may be EVAL_AVOID_SIDE_EFFECTS;
+   then only the type of the result need be correct.  */
+
+static value_ptr
+evaluate_subexp_for_address (exp, pos, noside)
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  enum exp_opcode op;
+  register int pc;
+  struct symbol *var;
+
+  pc = (*pos);
+  op = exp->elts[pc].opcode;
+
+  switch (op)
+    {
+    case UNOP_IND:
+      (*pos)++;
+      return evaluate_subexp (NULL_TYPE, exp, pos, noside);
+
+    case UNOP_MEMVAL:
+      (*pos) += 3;
+      return value_cast (lookup_pointer_type (exp->elts[pc + 1].type),
+			 evaluate_subexp (NULL_TYPE, exp, pos, noside));
+
+    case OP_VAR_VALUE:
+      var = exp->elts[pc + 2].symbol;
+
+      /* C++: The "address" of a reference should yield the address
+       * of the object pointed to. Let value_addr() deal with it. */
+      if (TYPE_CODE (SYMBOL_TYPE (var)) == TYPE_CODE_REF)
+        goto default_case;
+
+      (*pos) += 4;
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  struct type *type =
+	    lookup_pointer_type (SYMBOL_TYPE (var));
+	  enum address_class sym_class = SYMBOL_CLASS (var);
+
+	  if (sym_class == LOC_CONST
+	      || sym_class == LOC_CONST_BYTES
+	      || sym_class == LOC_REGISTER
+	      || sym_class == LOC_REGPARM)
+	    error ("Attempt to take address of register or constant.");
+
+	return
+	  value_zero (type, not_lval);
+	}
+      else
+	return
+	  locate_var_value
+	    (var,
+	     block_innermost_frame (exp->elts[pc + 1].block));
+
+    default:
+    default_case:
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  value_ptr x = evaluate_subexp (NULL_TYPE, exp, pos, noside);
+	  if (VALUE_LVAL (x) == lval_memory)
+	    return value_zero (lookup_pointer_type (VALUE_TYPE (x)),
+			       not_lval);
+	  else
+	    error ("Attempt to take address of non-lval");
+	}
+      return value_addr (evaluate_subexp (NULL_TYPE, exp, pos, noside));
+    }
+}
+
+/* Evaluate like `evaluate_subexp' except coercing arrays to pointers.
+   When used in contexts where arrays will be coerced anyway, this is
+   equivalent to `evaluate_subexp' but much faster because it avoids
+   actually fetching array contents (perhaps obsolete now that we have
+   VALUE_LAZY).
+
+   Note that we currently only do the coercion for C expressions, where
+   arrays are zero based and the coercion is correct.  For other languages,
+   with nonzero based arrays, coercion loses.  Use CAST_IS_CONVERSION
+   to decide if coercion is appropriate.
+
+   */
+
+value_ptr
+evaluate_subexp_with_coercion (exp, pos, noside)
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  register enum exp_opcode op;
+  register int pc;
+  register value_ptr val;
+  struct symbol *var;
+
+  pc = (*pos);
+  op = exp->elts[pc].opcode;
+
+  switch (op)
+    {
+    case OP_VAR_VALUE:
+      var = exp->elts[pc + 2].symbol;
+      if (TYPE_CODE (check_typedef (SYMBOL_TYPE (var))) == TYPE_CODE_ARRAY
+	  && CAST_IS_CONVERSION)
+	{
+	  (*pos) += 4;
+	  val =
+	    locate_var_value
+	      (var, block_innermost_frame (exp->elts[pc + 1].block));
+	  return value_cast (lookup_pointer_type (TYPE_TARGET_TYPE (SYMBOL_TYPE (var))),
+			     val);
+	}
+      /* FALLTHROUGH */
+
+    default:
+      return evaluate_subexp (NULL_TYPE, exp, pos, noside);
+    }
+}
+
+/* Evaluate a subexpression of EXP, at index *POS,
+   and return a value for the size of that subexpression.
+   Advance *POS over the subexpression.  */
+
+static value_ptr
+evaluate_subexp_for_sizeof (exp, pos)
+     register struct expression *exp;
+     register int *pos;
+{
+  enum exp_opcode op;
+  register int pc;
+  struct type *type;
+  value_ptr val;
+
+  pc = (*pos);
+  op = exp->elts[pc].opcode;
+
+  switch (op)
+    {
+      /* This case is handled specially
+	 so that we avoid creating a value for the result type.
+	 If the result type is very big, it's desirable not to
+	 create a value unnecessarily.  */
+    case UNOP_IND:
+      (*pos)++;
+      val = evaluate_subexp (NULL_TYPE, exp, pos, EVAL_AVOID_SIDE_EFFECTS);
+      type = check_typedef (VALUE_TYPE (val));
+      if (TYPE_CODE (type) != TYPE_CODE_PTR
+	  && TYPE_CODE (type) != TYPE_CODE_REF
+	  && TYPE_CODE (type) != TYPE_CODE_ARRAY)
+	error ("Attempt to take contents of a non-pointer value.");
+      type = check_typedef (TYPE_TARGET_TYPE (type));
+      return value_from_longest (builtin_type_int, (LONGEST)
+		      TYPE_LENGTH (type));
+
+    case UNOP_MEMVAL:
+      (*pos) += 3;
+      type = check_typedef (exp->elts[pc + 1].type);
+      return value_from_longest (builtin_type_int,
+				 (LONGEST) TYPE_LENGTH (type));
+
+    case OP_VAR_VALUE:
+      (*pos) += 4;
+      type = check_typedef (SYMBOL_TYPE (exp->elts[pc + 2].symbol));
+      return
+	value_from_longest (builtin_type_int, (LONGEST) TYPE_LENGTH (type));
+
+    default:
+      val = evaluate_subexp (NULL_TYPE, exp, pos, EVAL_AVOID_SIDE_EFFECTS);
+      return value_from_longest (builtin_type_int,
+			      (LONGEST) TYPE_LENGTH (VALUE_TYPE (val)));
+    }
+}
+
+/* Parse a type expression in the string [P..P+LENGTH). */
+
+struct type *
+parse_and_eval_type (p, length)
+     char *p;
+     int length;
+{
+    char *tmp = (char *)alloca (length + 4);
+    struct expression *expr;
+    tmp[0] = '(';
+    memcpy (tmp+1, p, length);
+    tmp[length+1] = ')';
+    tmp[length+2] = '0';
+    tmp[length+3] = '\0';
+    expr = parse_expression (tmp);
+    if (expr->elts[0].opcode != UNOP_CAST)
+	error ("Internal error in eval_type.");
+    return expr->elts[1].type;
+}
+
+int
+calc_f77_array_dims (array_type)
+     struct type *array_type;
+{
+  int ndimen = 1;
+  struct type *tmp_type;
+
+  if ((TYPE_CODE(array_type) != TYPE_CODE_ARRAY))
+    error ("Can't get dimensions for a non-array type");
+   
+  tmp_type = array_type; 
+
+  while ((tmp_type = TYPE_TARGET_TYPE (tmp_type)))
+    {
+      if (TYPE_CODE (tmp_type) == TYPE_CODE_ARRAY)
+	++ndimen;
+    }
+  return ndimen; 
+}
diff --git a/gdb/exc_request.defs b/gdb/exc_request.defs
new file mode 100644
index 0000000..9b5ed2e
--- /dev/null
+++ b/gdb/exc_request.defs
@@ -0,0 +1,51 @@
+/* 
+ * Mach Operating System
+ * Copyright (c) 1993,1991,1990,1989,1988,1987 Carnegie Mellon University
+ * All Rights Reserved.
+ * 
+ * Permission to use, copy, modify and distribute this software and its
+ * documentation is hereby granted, provided that both the copyright
+ * notice and this permission notice appear in all copies of the
+ * software, derivative works or modified versions, and any portions
+ * thereof, and that both notices appear in supporting documentation.
+ * 
+ * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
+ * CONDITION.  CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
+ * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
+ * 
+ * Carnegie Mellon requests users of this software to return to
+ * 
+ *  Software Distribution Coordinator  or  Software.Distribution@CS.CMU.EDU
+ *  School of Computer Science
+ *  Carnegie Mellon University
+ *  Pittsburgh PA 15213-3890
+ * 
+ * any improvements or extensions that they make and grant Carnegie Mellon
+ * the rights to redistribute these changes.
+ */
+
+/*
+ * Abstract:
+ *	MiG definitions file for Mach exception interface (request half).
+ */
+
+subsystem exc 2400;
+
+#include <mach/std_types.defs>
+
+#ifdef USERPREFIX
+userprefix USERPREFIX;
+#endif
+
+#ifdef SERVERPREFIX
+serverprefix SERVERPREFIX;
+#endif
+
+simpleroutine exception_raise_request (
+	exception_port	: mach_port_t;
+	replyport reply : mach_port_send_once_t;
+	thread		: mach_port_t;
+	task		: mach_port_t;
+	exception	: integer_t;
+	code		: integer_t;
+	subcode		: integer_t);
diff --git a/gdb/exec.c b/gdb/exec.c
new file mode 100644
index 0000000..87aed01
--- /dev/null
+++ b/gdb/exec.c
@@ -0,0 +1,762 @@
+/* Work with executable files, for GDB. 
+   Copyright 1988, 1989, 1991, 1992, 1993, 1994, 1997, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <fcntl.h>
+#include "gdb_string.h"
+
+#include "gdbcore.h"
+
+#include <ctype.h>
+#include "gdb_stat.h"
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+#include "xcoffsolib.h"
+
+struct vmap *map_vmap PARAMS ((bfd *, bfd *));
+
+void (*file_changed_hook) PARAMS ((char *));
+
+/* Prototypes for local functions */
+
+static void add_to_section_table PARAMS ((bfd *, sec_ptr, PTR));
+
+static void exec_close PARAMS ((int));
+
+static void file_command PARAMS ((char *, int));
+
+static void set_section_command PARAMS ((char *, int));
+
+static void exec_files_info PARAMS ((struct target_ops *));
+
+static void bfdsec_to_vmap PARAMS ((bfd *, sec_ptr, PTR));
+
+static int ignore PARAMS ((CORE_ADDR, char *));
+
+static void init_exec_ops PARAMS ((void));
+
+void _initialize_exec PARAMS ((void));
+
+extern int info_verbose;
+
+/* The target vector for executable files.  */
+
+struct target_ops exec_ops;
+
+/* The Binary File Descriptor handle for the executable file.  */
+
+bfd *exec_bfd = NULL;
+
+/* Whether to open exec and core files read-only or read-write.  */
+
+int write_files = 0;
+
+/* Text start and end addresses (KLUDGE) if needed */
+
+#ifndef NEED_TEXT_START_END
+#define NEED_TEXT_START_END (0)
+#endif
+CORE_ADDR text_start = 0;
+CORE_ADDR text_end   = 0;
+
+struct vmap *vmap;
+
+/* ARGSUSED */
+static void
+exec_close (quitting)
+     int quitting;
+{
+  int need_symtab_cleanup = 0;
+  struct vmap *vp, *nxt;
+  
+  for (nxt = vmap; nxt != NULL; )
+    {
+      vp = nxt;
+      nxt = vp->nxt;
+
+      /* if there is an objfile associated with this bfd,
+	 free_objfile() will do proper cleanup of objfile *and* bfd. */
+		   
+      if (vp->objfile)
+	{
+	  free_objfile (vp->objfile);
+	  need_symtab_cleanup = 1;
+	}
+      else if (vp->bfd != exec_bfd)
+	/* FIXME-leak: We should be freeing vp->name too, I think.  */
+	if (!bfd_close (vp->bfd))
+	  warning ("cannot close \"%s\": %s",
+		   vp->name, bfd_errmsg (bfd_get_error ()));
+
+      /* FIXME: This routine is #if 0'd in symfile.c.  What should we
+	 be doing here?  Should we just free everything in
+	 vp->objfile->symtabs?  Should free_objfile do that?
+	 FIXME-as-well: free_objfile already free'd vp->name, so it isn't
+	 valid here.  */
+      free_named_symtabs (vp->name);
+      free (vp);
+    }
+
+  vmap = NULL;
+
+  if (exec_bfd)
+    {
+      char *name = bfd_get_filename (exec_bfd);
+
+      if (!bfd_close (exec_bfd))
+	warning ("cannot close \"%s\": %s",
+		 name, bfd_errmsg (bfd_get_error ()));
+      free (name);
+      exec_bfd = NULL;
+    }
+
+  if (exec_ops.to_sections)
+    {
+      free ((PTR)exec_ops.to_sections);
+      exec_ops.to_sections = NULL;
+      exec_ops.to_sections_end = NULL;
+    }
+}
+
+/*  Process the first arg in ARGS as the new exec file.
+
+    This function is intended to be behave essentially the same
+    as exec_file_command, except that the latter will detect when
+    a target is being debugged, and will ask the user whether it
+    should be shut down first.  (If the answer is "no", then the
+    new file is ignored.)
+
+    This file is used by exec_file_command, to do the work of opening
+    and processing the exec file after any prompting has happened.
+
+    And, it is used by child_attach, when the attach command was
+    given a pid but not a exec pathname, and the attach command could
+    figure out the pathname from the pid.  (In this case, we shouldn't
+    ask the user whether the current target should be shut down --
+    we're supplying the exec pathname late for good reason.) */
+
+void
+exec_file_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  char *filename;
+
+  /* Remove any previous exec file.  */
+  unpush_target (&exec_ops);
+
+  /* Now open and digest the file the user requested, if any.  */
+
+  if (args)
+    {
+      char *scratch_pathname;
+      int scratch_chan;
+      
+      /* Scan through the args and pick up the first non option arg
+	 as the filename.  */
+
+      argv = buildargv (args);
+      if (argv == NULL)
+	nomem (0);
+
+      make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+
+      for (; (*argv != NULL) && (**argv == '-'); argv++) {;}
+      if (*argv == NULL)
+	error ("no exec file name was specified");
+
+      filename = tilde_expand (*argv);
+      make_cleanup (free, filename);
+      
+      scratch_chan = openp (getenv ("PATH"), 1, filename, 
+			    write_files? O_RDWR|O_BINARY: O_RDONLY|O_BINARY, 0,
+			    &scratch_pathname);
+#if defined(__GO32__) || defined(_WIN32)
+      if (scratch_chan < 0)
+      {
+	char *exename = alloca (strlen (filename) + 5);
+	strcat (strcpy (exename, filename), ".exe");
+	scratch_chan = openp (getenv ("PATH"), 1, exename, write_files ?
+		O_RDWR|O_BINARY : O_RDONLY|O_BINARY, 0, &scratch_pathname);
+      }
+#endif
+      if (scratch_chan < 0)
+	perror_with_name (filename);
+      exec_bfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan);
+
+      if (!exec_bfd)
+	error ("\"%s\": could not open as an executable file: %s",
+	       scratch_pathname, bfd_errmsg (bfd_get_error ()));
+
+      /* At this point, scratch_pathname and exec_bfd->name both point to the
+	 same malloc'd string.  However exec_close() will attempt to free it
+	 via the exec_bfd->name pointer, so we need to make another copy and
+	 leave exec_bfd as the new owner of the original copy. */
+      scratch_pathname = strdup (scratch_pathname);
+      make_cleanup (free, scratch_pathname);
+      
+      if (!bfd_check_format (exec_bfd, bfd_object))
+	{
+	  /* Make sure to close exec_bfd, or else "run" might try to use
+	     it.  */
+	  exec_close (0);
+	  error ("\"%s\": not in executable format: %s",
+		 scratch_pathname, bfd_errmsg (bfd_get_error ()));
+	}
+
+      /* FIXME - This should only be run for RS6000, but the ifdef is a poor
+	 way to accomplish.  */
+#ifdef IBM6000_TARGET
+      /* Setup initial vmap. */
+
+      map_vmap (exec_bfd, 0);
+      if (vmap == NULL)
+	{
+	  /* Make sure to close exec_bfd, or else "run" might try to use
+	     it.  */
+	  exec_close (0);
+	  error ("\"%s\": can't find the file sections: %s",
+		 scratch_pathname, bfd_errmsg (bfd_get_error ()));
+	}
+#endif /* IBM6000_TARGET */
+
+      if (build_section_table (exec_bfd, &exec_ops.to_sections,
+				&exec_ops.to_sections_end))
+	{
+	  /* Make sure to close exec_bfd, or else "run" might try to use
+	     it.  */
+	  exec_close (0);
+	  error ("\"%s\": can't find the file sections: %s", 
+		 scratch_pathname, bfd_errmsg (bfd_get_error ()));
+	}
+
+      /* text_end is sometimes used for where to put call dummies.  A
+	 few ports use these for other purposes too.  */
+      if (NEED_TEXT_START_END)
+	{
+	  struct section_table *p;
+	  
+	  /* Set text_start to the lowest address of the start of any
+	     readonly code section and set text_end to the highest
+	     address of the end of any readonly code section.  */
+	  /* FIXME: The comment above does not match the code.  The
+	     code checks for sections with are either code *or*
+	     readonly.  */
+	  text_start = ~(CORE_ADDR)0;
+	  text_end = (CORE_ADDR)0;
+	  for (p = exec_ops.to_sections; p < exec_ops.to_sections_end; p++)
+	    if (bfd_get_section_flags (p->bfd, p->the_bfd_section)
+		& (SEC_CODE | SEC_READONLY))
+	      {
+		if (text_start > p->addr) 
+		  text_start = p->addr;
+		if (text_end < p->endaddr)
+		  text_end = p->endaddr;
+	      }
+	}
+
+      validate_files ();
+
+      set_gdbarch_from_file (exec_bfd);
+
+      push_target (&exec_ops);
+
+      /* Tell display code (if any) about the changed file name.  */
+      if (exec_file_display_hook)
+	(*exec_file_display_hook) (filename);
+    }
+  else if (from_tty)
+    printf_unfiltered ("No executable file now.\n");
+}
+
+/*  Process the first arg in ARGS as the new exec file.
+
+    Note that we have to explicitly ignore additional args, since we can
+    be called from file_command(), which also calls symbol_file_command()
+    which can take multiple args. */
+
+void
+exec_file_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  char *filename;
+
+  target_preopen (from_tty);
+
+  exec_file_attach (args, from_tty);
+}
+
+/* Set both the exec file and the symbol file, in one command.  
+   What a novelty.  Why did GDB go through four major releases before this
+   command was added?  */
+
+static void
+file_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  /* FIXME, if we lose on reading the symbol file, we should revert
+     the exec file, but that's rough.  */
+  exec_file_command (arg, from_tty);
+  symbol_file_command (arg, from_tty);
+  if (file_changed_hook)
+    file_changed_hook (arg);
+}
+
+
+/* Locate all mappable sections of a BFD file. 
+   table_pp_char is a char * to get it through bfd_map_over_sections;
+   we cast it back to its proper type.  */
+
+static void
+add_to_section_table (abfd, asect, table_pp_char)
+     bfd *abfd;
+     sec_ptr asect;
+     PTR table_pp_char;
+{
+  struct section_table **table_pp = (struct section_table **)table_pp_char;
+  flagword aflag;
+
+  aflag = bfd_get_section_flags (abfd, asect);
+  if (!(aflag & SEC_ALLOC))
+    return;
+  if (0 == bfd_section_size (abfd, asect))
+    return;
+  (*table_pp)->bfd = abfd;
+  (*table_pp)->the_bfd_section = asect;
+  (*table_pp)->addr = bfd_section_vma (abfd, asect);
+  (*table_pp)->endaddr = (*table_pp)->addr + bfd_section_size (abfd, asect);
+  (*table_pp)++;
+}
+
+/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
+   Returns 0 if OK, 1 on error.  */
+
+int
+build_section_table (some_bfd, start, end)
+     bfd *some_bfd;
+     struct section_table **start, **end;
+{
+  unsigned count;
+
+  count = bfd_count_sections (some_bfd);
+  if (*start)
+    free ((PTR)*start);
+  *start = (struct section_table *) xmalloc (count * sizeof (**start));
+  *end = *start;
+  bfd_map_over_sections (some_bfd, add_to_section_table, (char *)end);
+  if (*end > *start + count)
+    abort();
+  /* We could realloc the table, but it probably loses for most files.  */
+  return 0;
+}
+
+static void
+bfdsec_to_vmap(abfd, sect, arg3) 
+     bfd *abfd;
+     sec_ptr sect;
+     PTR arg3;
+{
+  struct vmap_and_bfd *vmap_bfd = (struct vmap_and_bfd *) arg3;
+  struct vmap *vp;
+
+  vp = vmap_bfd->pvmap;
+
+  if ((bfd_get_section_flags (abfd, sect) & SEC_LOAD) == 0)
+    return;
+
+  if (STREQ (bfd_section_name (abfd, sect), ".text"))
+    {
+      vp->tstart = bfd_section_vma (abfd, sect);
+      vp->tend = vp->tstart + bfd_section_size (abfd, sect);
+      vp->tvma = bfd_section_vma (abfd, sect);
+      vp->toffs = sect->filepos;
+    }
+  else if (STREQ (bfd_section_name (abfd, sect), ".data"))
+    {
+      vp->dstart = bfd_section_vma (abfd, sect);
+      vp->dend = vp->dstart + bfd_section_size (abfd, sect);
+      vp->dvma = bfd_section_vma (abfd, sect);
+    }
+  /* Silently ignore other types of sections. (FIXME?)  */
+}
+
+/* Make a vmap for ABFD which might be a member of the archive ARCH.
+   Return the new vmap.  */
+
+struct vmap *
+map_vmap (abfd, arch)
+     bfd *abfd;
+     bfd *arch;
+{
+  struct vmap_and_bfd vmap_bfd;
+  struct vmap *vp, **vpp;
+
+  vp = (struct vmap *) xmalloc (sizeof (*vp));
+  memset ((char *) vp, '\0', sizeof (*vp));
+  vp->nxt = 0;
+  vp->bfd = abfd;
+  vp->name = bfd_get_filename (arch ? arch : abfd);
+  vp->member = arch ? bfd_get_filename (abfd) : "";
+  
+  vmap_bfd.pbfd = arch;
+  vmap_bfd.pvmap = vp;
+  bfd_map_over_sections (abfd, bfdsec_to_vmap, &vmap_bfd);
+
+  /* Find the end of the list and append. */
+  for (vpp = &vmap; *vpp; vpp = &(*vpp)->nxt)
+    ;
+  *vpp = vp;
+
+  return vp;
+}
+
+/* Read or write the exec file.
+
+   Args are address within a BFD file, address within gdb address-space,
+   length, and a flag indicating whether to read or write.
+
+   Result is a length:
+
+	0:    We cannot handle this address and length.
+	> 0:  We have handled N bytes starting at this address.
+	      (If N == length, we did it all.)  We might be able
+	      to handle more bytes beyond this length, but no
+	      promises.
+	< 0:  We cannot handle this address, but if somebody
+	      else handles (-N) bytes, we can start from there.
+
+    The same routine is used to handle both core and exec files;
+    we just tail-call it with more arguments to select between them.  */
+
+int
+xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;
+{
+  boolean res;
+  struct section_table *p;
+  CORE_ADDR nextsectaddr, memend;
+  boolean (*xfer_fn) PARAMS ((bfd *, sec_ptr, PTR, file_ptr, bfd_size_type));
+  asection *section;
+
+  if (len <= 0)
+    abort();
+
+  if (overlay_debugging)
+    {
+      section = find_pc_overlay (memaddr);
+      if (pc_in_unmapped_range (memaddr, section))
+	memaddr = overlay_mapped_address (memaddr, section);
+    }
+
+  memend = memaddr + len;
+  xfer_fn = write ? bfd_set_section_contents : bfd_get_section_contents;
+  nextsectaddr = memend;
+
+#if 0 /* Stu's implementation */
+/* If a section has been specified, try to use it.  Note that we cannot use the
+   specified section directly.  This is because it usually comes from the
+   symbol file, which may be different from the exec or core file.  Instead, we
+   have to lookup the specified section by name in the bfd associated with
+   to_sections.  */
+
+  if (target_memory_bfd_section)
+    {
+      asection *s;
+      bfd *abfd;
+      asection *target_section;
+      bfd *target_bfd;
+
+      s = target_memory_bfd_section;
+      abfd = s->owner;
+
+      target_bfd = target->to_sections->bfd;
+      target_section = bfd_get_section_by_name (target_bfd, bfd_section_name (abfd, s));
+
+      if (target_section)
+	{
+	  bfd_vma sec_addr;
+	  bfd_size_type sec_size;
+
+	  sec_addr = bfd_section_vma (target_bfd, target_section);
+	  sec_size = target_section->_raw_size;
+
+	  /* Make sure the requested memory starts inside the section.  */
+
+	  if (memaddr >= sec_addr
+	      && memaddr < sec_addr + sec_size)
+	    {
+	      /* Cut back length in case request overflows the end of the section. */
+	      len = min (len, sec_addr + sec_size - memaddr);
+
+	      res = xfer_fn (target_bfd, target_section, myaddr, memaddr - sec_addr, len);
+
+	      return res ? len : 0;
+	    }
+	}
+    }
+#endif /* 0, Stu's implementation */
+  for (p = target->to_sections; p < target->to_sections_end; p++)
+    {
+      if (overlay_debugging && section && p->the_bfd_section &&
+	  strcmp (section->name, p->the_bfd_section->name) != 0)
+	continue;	/* not the section we need */
+      if (memaddr >= p->addr)
+ 	if (memend <= p->endaddr)
+	  {
+	    /* Entire transfer is within this section.  */
+	    res = xfer_fn (p->bfd, p->the_bfd_section, myaddr,
+			   memaddr - p->addr, len);
+	    return (res != 0) ? len : 0;
+	  }
+	else if (memaddr >= p->endaddr)
+	  {
+	    /* This section ends before the transfer starts.  */
+	    continue;
+	  }
+	else 
+	  {
+	    /* This section overlaps the transfer.  Just do half.  */
+	    len = p->endaddr - memaddr;
+	    res = xfer_fn (p->bfd, p->the_bfd_section, myaddr,
+			   memaddr - p->addr, len);
+	    return (res != 0) ? len : 0;
+	  }
+      else
+	nextsectaddr = min (nextsectaddr, p->addr);
+    }
+
+  if (nextsectaddr >= memend)
+    return 0;				/* We can't help */
+  else
+    return - (nextsectaddr - memaddr);	/* Next boundary where we can help */
+}
+
+#ifdef FIXME
+#ifdef REG_STACK_SEGMENT
+/* MOVE TO BFD... */
+    /* Pyramids and AM29000s have an extra segment in the virtual address space
+       for the (control) stack of register-window frames.  The AM29000 folk
+       call it the "register stack" rather than the "memory stack".  */
+    else if (memaddr >= reg_stack_start && memaddr < reg_stack_end)
+      {
+	i = min (len, reg_stack_end - memaddr);
+	fileptr = memaddr - reg_stack_start + reg_stack_offset;
+	wanna_xfer = coredata;
+      }
+#endif				/* REG_STACK_SEGMENT */
+#endif /* FIXME */
+
+void
+print_section_info (t, abfd)
+  struct target_ops *t;
+  bfd *abfd;
+{
+  struct section_table *p;
+
+  printf_filtered ("\t`%s', ", bfd_get_filename(abfd));
+  wrap_here ("        ");
+  printf_filtered ("file type %s.\n", bfd_get_target(abfd));
+  if (abfd == exec_bfd)
+    {
+      printf_filtered ("\tEntry point: ");
+      print_address_numeric (bfd_get_start_address (abfd), 1, gdb_stdout);
+      printf_filtered ("\n");
+    }
+  for (p = t->to_sections; p < t->to_sections_end; p++)
+    {
+      /* FIXME-32x64 need a print_address_numeric with field width */
+      printf_filtered ("\t%s", local_hex_string_custom ((unsigned long) p->addr, "08l"));
+      printf_filtered (" - %s", local_hex_string_custom ((unsigned long) p->endaddr, "08l"));
+      if (info_verbose)
+	printf_filtered (" @ %s",
+			 local_hex_string_custom ((unsigned long) p->the_bfd_section->filepos, "08l"));
+      printf_filtered (" is %s", bfd_section_name (p->bfd, p->the_bfd_section));
+      if (p->bfd != abfd)
+	{
+	  printf_filtered (" in %s", bfd_get_filename (p->bfd));
+	}
+      printf_filtered ("\n");
+    }
+}
+
+static void
+exec_files_info (t)
+     struct target_ops *t;
+{
+  print_section_info (t, exec_bfd);
+
+  if (vmap)
+    {
+      struct vmap *vp;
+
+      printf_unfiltered ("\tMapping info for file `%s'.\n", vmap->name);
+      printf_unfiltered ("\t  %8.8s   %8.8s   %8.8s   %8.8s %8.8s %s\n",
+		       "tstart", "tend", "dstart", "dend", "section",
+		       "file(member)");
+
+    for (vp = vmap; vp; vp = vp->nxt)
+      printf_unfiltered ("\t0x%8.8x 0x%8.8x 0x%8.8x 0x%8.8x %s%s%s%s\n",
+			 vp->tstart, vp->tend, vp->dstart, vp->dend, vp->name,
+			 *vp->member ? "(" : "", vp->member,
+			 *vp->member ? ")" : "");
+    }
+}
+
+static void
+set_section_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct section_table *p;
+  char *secname;
+  unsigned seclen;
+  unsigned long secaddr;
+  char secprint[100];
+  long offset;
+
+  if (args == 0)
+    error ("Must specify section name and its virtual address");
+
+  /* Parse out section name */
+  for (secname = args; !isspace(*args); args++) ;
+  seclen = args - secname;
+
+  /* Parse out new virtual address */
+  secaddr = parse_and_eval_address (args);
+
+  for (p = exec_ops.to_sections; p < exec_ops.to_sections_end; p++) {
+    if (!strncmp (secname, bfd_section_name (exec_bfd, p->the_bfd_section), seclen)
+	&& bfd_section_name (exec_bfd, p->the_bfd_section)[seclen] == '\0') {
+      offset = secaddr - p->addr;
+      p->addr += offset;
+      p->endaddr += offset;
+      if (from_tty)
+	exec_files_info(&exec_ops);
+      return;
+    }
+  } 
+  if (seclen >= sizeof (secprint))
+    seclen = sizeof (secprint) - 1;
+  strncpy (secprint, secname, seclen);
+  secprint[seclen] = '\0';
+  error ("Section %s not found", secprint);
+}
+
+/* If mourn is being called in all the right places, this could be say
+   `gdb internal error' (since generic_mourn calls
+   breakpoint_init_inferior).  */
+
+static int
+ignore (addr, contents)
+     CORE_ADDR addr;
+     char *contents;
+{
+  return 0;
+}
+
+/* Fill in the exec file target vector.  Very few entries need to be
+   defined.  */
+
+void
+init_exec_ops ()
+{
+  exec_ops.to_shortname = "exec";
+  exec_ops.to_longname = "Local exec file";
+  exec_ops.to_doc = "Use an executable file as a target.\n\
+Specify the filename of the executable file.";
+  exec_ops.to_open = exec_file_command;
+  exec_ops.to_close = exec_close;
+  exec_ops.to_attach = find_default_attach;
+  exec_ops.to_require_attach = find_default_require_attach;
+  exec_ops.to_require_detach = find_default_require_detach;
+  exec_ops.to_xfer_memory = xfer_memory;
+  exec_ops.to_files_info = exec_files_info;
+  exec_ops.to_insert_breakpoint = ignore;
+  exec_ops.to_remove_breakpoint = ignore;
+  exec_ops.to_create_inferior = find_default_create_inferior;
+  exec_ops.to_clone_and_follow_inferior = find_default_clone_and_follow_inferior;
+  exec_ops.to_stratum = file_stratum;
+  exec_ops.to_has_memory = 1;
+  exec_ops.to_magic = OPS_MAGIC;	
+}
+
+void
+_initialize_exec ()
+{
+  struct cmd_list_element *c;
+
+  init_exec_ops ();
+
+  if (!dbx_commands)
+    {
+      c = add_cmd ("file", class_files, file_command,
+		   "Use FILE as program to be debugged.\n\
+It is read for its symbols, for getting the contents of pure memory,\n\
+and it is the program executed when you use the `run' command.\n\
+If FILE cannot be found as specified, your execution directory path\n\
+($PATH) is searched for a command of that name.\n\
+No arg means to have no executable file and no symbols.", &cmdlist);
+      c->completer = filename_completer;
+    }
+
+  c = add_cmd ("exec-file", class_files, exec_file_command,
+	   "Use FILE as program for getting contents of pure memory.\n\
+If FILE cannot be found as specified, your execution directory path\n\
+is searched for a command of that name.\n\
+No arg means have no executable file.", &cmdlist);
+  c->completer = filename_completer;
+
+  add_com ("section", class_files, set_section_command,
+   "Change the base address of section SECTION of the exec file to ADDR.\n\
+This can be used if the exec file does not contain section addresses,\n\
+(such as in the a.out format), or when the addresses specified in the\n\
+file itself are wrong.  Each section must be changed separately.  The\n\
+``info files'' command lists all the sections and their addresses.");
+
+  add_show_from_set
+    (add_set_cmd ("write", class_support, var_boolean, (char *)&write_files,
+		  "Set writing into executable and core files.",
+		  &setlist),
+     &showlist);
+  
+  add_target (&exec_ops);
+}
diff --git a/gdb/expprint.c b/gdb/expprint.c
new file mode 100644
index 0000000..939919a
--- /dev/null
+++ b/gdb/expprint.c
@@ -0,0 +1,903 @@
+/* Print in infix form a struct expression.
+   Copyright (C) 1986, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "language.h"
+#include "parser-defs.h"
+
+#ifdef HAVE_CTYPE_H
+#include <ctype.h>
+#endif
+
+/* Prototypes for local functions */
+
+static void
+print_subexp PARAMS ((struct expression *, int *, GDB_FILE *, enum precedence));
+
+void
+print_expression (exp, stream)
+     struct expression *exp;
+     GDB_FILE *stream;
+{
+  int pc = 0;
+  print_subexp (exp, &pc, stream, PREC_NULL);
+}
+
+/* Print the subexpression of EXP that starts in position POS, on STREAM.
+   PREC is the precedence of the surrounding operator;
+   if the precedence of the main operator of this subexpression is less,
+   parentheses are needed here.  */
+
+static void
+print_subexp (exp, pos, stream, prec)
+     register struct expression *exp;
+     register int *pos;
+     GDB_FILE *stream;
+     enum precedence prec;
+{
+  register unsigned tem;
+  register const struct op_print *op_print_tab;
+  register int pc;
+  unsigned nargs;
+  register char *op_str;
+  int assign_modify = 0;
+  enum exp_opcode opcode;
+  enum precedence myprec = PREC_NULL;
+  /* Set to 1 for a right-associative operator.  */
+  int assoc = 0;
+  value_ptr val;
+  char *tempstr = NULL;
+
+  op_print_tab = exp->language_defn->la_op_print_tab;
+  pc = (*pos)++;
+  opcode = exp->elts[pc].opcode;
+  switch (opcode)
+    {
+    /* Common ops */
+
+    case OP_SCOPE:
+      myprec = PREC_PREFIX;
+      assoc = 0;
+      fputs_filtered (type_name_no_tag (exp->elts[pc + 1].type), stream);
+      fputs_filtered ("::", stream);
+      nargs = longest_to_int (exp->elts[pc + 2].longconst);
+      (*pos) += 4 + BYTES_TO_EXP_ELEM (nargs + 1);
+      fputs_filtered (&exp->elts[pc + 3].string, stream);
+      return;
+
+    case OP_LONG:
+      (*pos) += 3;
+      value_print (value_from_longest (exp->elts[pc + 1].type,
+				       exp->elts[pc + 2].longconst),
+		   stream, 0, Val_no_prettyprint);
+      return;
+
+    case OP_DOUBLE:
+      (*pos) += 3;
+      value_print (value_from_double (exp->elts[pc + 1].type,
+				      exp->elts[pc + 2].doubleconst),
+		   stream, 0, Val_no_prettyprint);
+      return;
+
+    case OP_VAR_VALUE:
+      {
+	struct block *b;
+	(*pos) += 3;
+	b = exp->elts[pc + 1].block;
+	if (b != NULL
+	    && BLOCK_FUNCTION (b) != NULL
+	    && SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)) != NULL)
+	  {
+	    fputs_filtered (SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)), stream);
+	    fputs_filtered ("::", stream);
+	  }
+	fputs_filtered (SYMBOL_SOURCE_NAME (exp->elts[pc + 2].symbol), stream);
+      }
+      return;
+
+    case OP_LAST:
+      (*pos) += 2;
+      fprintf_filtered (stream, "$%d",
+			longest_to_int (exp->elts[pc + 1].longconst));
+      return;
+
+    case OP_REGISTER:
+      (*pos) += 2;
+      fprintf_filtered (stream, "$%s",
+	       REGISTER_NAME (longest_to_int (exp->elts[pc + 1].longconst)));
+      return;
+
+    case OP_BOOL:
+      (*pos) += 2;
+      fprintf_filtered (stream, "%s",
+			longest_to_int (exp->elts[pc + 1].longconst)
+			? "TRUE" : "FALSE");
+      return;
+
+    case OP_INTERNALVAR:
+      (*pos) += 2;
+      fprintf_filtered (stream, "$%s",
+	       internalvar_name (exp->elts[pc + 1].internalvar));
+      return;
+
+    case OP_FUNCALL:
+      (*pos) += 2;
+      nargs = longest_to_int (exp->elts[pc + 1].longconst);
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered (" (", stream);
+      for (tem = 0; tem < nargs; tem++)
+	{
+	  if (tem != 0)
+	    fputs_filtered (", ", stream);
+	  print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+	}
+      fputs_filtered (")", stream);
+      return;
+
+    case OP_NAME:
+    case OP_EXPRSTRING:
+      nargs = longest_to_int (exp -> elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
+      fputs_filtered (&exp->elts[pc + 2].string, stream);
+      return;
+
+    case OP_STRING:
+      nargs = longest_to_int (exp -> elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
+      /* LA_PRINT_STRING will print using the current repeat count threshold.
+	 If necessary, we can temporarily set it to zero, or pass it as an
+	 additional parameter to LA_PRINT_STRING.  -fnf */
+      LA_PRINT_STRING (stream, &exp->elts[pc + 2].string, nargs, 1, 0);
+      return;
+
+    case OP_BITSTRING:
+      nargs = longest_to_int (exp -> elts[pc + 1].longconst);
+      (*pos)
+	+= 3 + BYTES_TO_EXP_ELEM ((nargs + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT);
+      fprintf_unfiltered (stream, "B'<unimplemented>'");
+      return;
+
+    case OP_ARRAY:
+      (*pos) += 3;
+      nargs = longest_to_int (exp->elts[pc + 2].longconst);
+      nargs -= longest_to_int (exp->elts[pc + 1].longconst);
+      nargs++;
+      tem = 0;
+      if (exp->elts[pc + 4].opcode == OP_LONG
+	  && exp->elts[pc + 5].type == builtin_type_char
+	  && exp->language_defn->la_language == language_c)
+	{
+	  /* Attempt to print C character arrays using string syntax.
+	     Walk through the args, picking up one character from each
+	     of the OP_LONG expression elements.  If any array element
+	     does not match our expection of what we should find for
+	     a simple string, revert back to array printing.  Note that
+	     the last expression element is an explicit null terminator
+	     byte, which doesn't get printed. */
+	  tempstr = alloca (nargs);
+	  pc += 4;
+	  while (tem < nargs)
+	    {
+	      if (exp->elts[pc].opcode != OP_LONG
+		  || exp->elts[pc + 1].type != builtin_type_char)
+		{
+		  /* Not a simple array of char, use regular array printing. */
+		  tem = 0;
+		  break;
+		}
+	      else
+		{
+		  tempstr[tem++] =
+		    longest_to_int (exp->elts[pc + 2].longconst);
+		  pc += 4;
+		}
+	    }
+	}
+      if (tem > 0)
+	{
+	  LA_PRINT_STRING (stream, tempstr, nargs - 1, 1, 0);
+	  (*pos) = pc;
+	}
+      else
+	{
+	  int is_chill = exp->language_defn->la_language == language_chill;
+	  fputs_filtered (is_chill ? " [" : " {", stream);
+	  for (tem = 0; tem < nargs; tem++)
+	    {
+	      if (tem != 0)
+		{
+		  fputs_filtered (", ", stream);
+		}
+	      print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+	    }
+	  fputs_filtered (is_chill ? "]" : "}", stream);
+	}
+      return;
+
+    case OP_LABELED:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+
+      if (exp->language_defn->la_language == language_chill)
+	{
+	  fputs_filtered (".", stream);
+	  fputs_filtered (&exp->elts[pc + 2].string, stream);
+	  fputs_filtered (exp->elts[*pos].opcode == OP_LABELED ? ", "
+			  : ": ",
+			  stream);
+	}
+      else
+	{
+	  /* Gcc support both these syntaxes.  Unsure which is preferred.  */
+#if 1
+	  fputs_filtered (&exp->elts[pc + 2].string, stream);
+	  fputs_filtered (": ", stream);
+#else
+	  fputs_filtered (".", stream);
+	  fputs_filtered (&exp->elts[pc + 2].string, stream);
+	  fputs_filtered ("=", stream);
+#endif
+	}
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      return;
+
+    case TERNOP_COND:
+      if ((int) prec > (int) PREC_COMMA)
+	fputs_filtered ("(", stream);
+      /* Print the subexpressions, forcing parentheses
+	 around any binary operations within them.
+	 This is more parentheses than are strictly necessary,
+	 but it looks clearer.  */
+      print_subexp (exp, pos, stream, PREC_HYPER);
+      fputs_filtered (" ? ", stream);
+      print_subexp (exp, pos, stream, PREC_HYPER);
+      fputs_filtered (" : ", stream);
+      print_subexp (exp, pos, stream, PREC_HYPER);
+      if ((int) prec > (int) PREC_COMMA)
+	fputs_filtered (")", stream);
+      return;
+
+    case TERNOP_SLICE:
+    case TERNOP_SLICE_COUNT:
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered ("(", stream);
+      print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+      fputs_filtered (opcode == TERNOP_SLICE ? " : " : " UP ", stream);
+      print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+      fputs_filtered (")", stream);
+      return;
+
+    case STRUCTOP_STRUCT:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered (".", stream);
+      fputs_filtered (&exp->elts[pc + 2].string, stream);
+      return;
+
+    /* Will not occur for Modula-2 */
+    case STRUCTOP_PTR:
+      tem = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered ("->", stream);
+      fputs_filtered (&exp->elts[pc + 2].string, stream);
+      return;
+
+    case BINOP_SUBSCRIPT:
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered ("[", stream);
+      print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+      fputs_filtered ("]", stream);
+      return;
+
+    case UNOP_POSTINCREMENT:
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered ("++", stream);
+      return;
+
+    case UNOP_POSTDECREMENT:
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fputs_filtered ("--", stream);
+      return;
+
+    case UNOP_CAST:
+      (*pos) += 2;
+      if ((int) prec > (int) PREC_PREFIX)
+        fputs_filtered ("(", stream);
+      fputs_filtered ("(", stream);
+      type_print (exp->elts[pc + 1].type, "", stream, 0);
+      fputs_filtered (") ", stream);
+      print_subexp (exp, pos, stream, PREC_PREFIX);
+      if ((int) prec > (int) PREC_PREFIX)
+        fputs_filtered (")", stream);
+      return;
+
+    case UNOP_MEMVAL:
+      (*pos) += 2;
+      if ((int) prec > (int) PREC_PREFIX)
+        fputs_filtered ("(", stream);
+      if (exp->elts[pc + 1].type->code == TYPE_CODE_FUNC &&
+	  exp->elts[pc + 3].opcode == OP_LONG) {
+	/* We have a minimal symbol fn, probably.  It's encoded
+	   as a UNOP_MEMVAL (function-type) of an OP_LONG (int, address).
+	   Swallow the OP_LONG (including both its opcodes); ignore
+	   its type; print the value in the type of the MEMVAL.  */
+	(*pos) += 4;
+	val = value_at_lazy (exp->elts[pc + 1].type,
+			     (CORE_ADDR) exp->elts[pc + 5].longconst,
+			     NULL);
+	value_print (val, stream, 0, Val_no_prettyprint);
+      } else {
+	fputs_filtered ("{", stream);
+	type_print (exp->elts[pc + 1].type, "", stream, 0);
+	fputs_filtered ("} ", stream);
+        print_subexp (exp, pos, stream, PREC_PREFIX);
+      }
+      if ((int) prec > (int) PREC_PREFIX)
+        fputs_filtered (")", stream);
+      return;
+
+    case BINOP_ASSIGN_MODIFY:
+      opcode = exp->elts[pc + 1].opcode;
+      (*pos) += 2;
+      myprec = PREC_ASSIGN;
+      assoc = 1;
+      assign_modify = 1;
+      op_str = "???";
+      for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
+	if (op_print_tab[tem].opcode == opcode)
+	  {
+	    op_str = op_print_tab[tem].string;
+	    break;
+	  }
+      if (op_print_tab[tem].opcode != opcode)
+	/* Not found; don't try to keep going because we don't know how
+	   to interpret further elements.  */
+	error ("Invalid expression");
+      break;
+
+    /* C++ ops */
+
+    case OP_THIS:
+      ++(*pos);
+      fputs_filtered ("this", stream);
+      return;
+
+    /* Modula-2 ops */
+
+    case MULTI_SUBSCRIPT:
+      (*pos) += 2;
+      nargs = longest_to_int (exp->elts[pc + 1].longconst);
+      print_subexp (exp, pos, stream, PREC_SUFFIX);
+      fprintf_unfiltered (stream, " [");
+      for (tem = 0; tem < nargs; tem++)
+	{
+	  if (tem != 0)
+	    fprintf_unfiltered (stream, ", ");
+	  print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
+	}
+      fprintf_unfiltered (stream, "]");
+      return;
+
+    case BINOP_VAL:
+      (*pos)+=2;
+      fprintf_unfiltered(stream,"VAL(");
+      type_print(exp->elts[pc+1].type,"",stream,0);
+      fprintf_unfiltered(stream,",");
+      print_subexp(exp,pos,stream,PREC_PREFIX);
+      fprintf_unfiltered(stream,")");
+      return;
+      
+    case BINOP_INCL:
+    case BINOP_EXCL:
+      error("print_subexp:  Not implemented.");
+
+    /* Default ops */
+
+    default:
+      op_str = "???";
+      for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
+	if (op_print_tab[tem].opcode == opcode)
+	  {
+	    op_str = op_print_tab[tem].string;
+	    myprec = op_print_tab[tem].precedence;
+	    assoc = op_print_tab[tem].right_assoc;
+	    break;
+	  }
+      if (op_print_tab[tem].opcode != opcode)
+	/* Not found; don't try to keep going because we don't know how
+	   to interpret further elements.  For example, this happens
+	   if opcode is OP_TYPE.  */
+	error ("Invalid expression");
+   }
+
+  /* Note that PREC_BUILTIN will always emit parentheses. */
+  if ((int) myprec < (int) prec)
+    fputs_filtered ("(", stream);
+  if ((int) opcode > (int) BINOP_END)
+    {
+      if (assoc)
+	{
+	  /* Unary postfix operator.  */
+	  print_subexp (exp, pos, stream, PREC_SUFFIX);
+	  fputs_filtered (op_str, stream);
+	}
+      else
+	{
+	  /* Unary prefix operator.  */
+	  fputs_filtered (op_str, stream);
+	  if (myprec == PREC_BUILTIN_FUNCTION)
+	    fputs_filtered ("(", stream);
+	  print_subexp (exp, pos, stream, PREC_PREFIX);
+	  if (myprec == PREC_BUILTIN_FUNCTION)
+	    fputs_filtered (")", stream);
+	}
+    }
+  else
+    {
+      /* Binary operator.  */
+      /* Print left operand.
+	 If operator is right-associative,
+	 increment precedence for this operand.  */
+      print_subexp (exp, pos, stream,
+		    (enum precedence) ((int) myprec + assoc));
+      /* Print the operator itself.  */
+      if (assign_modify)
+	fprintf_filtered (stream, " %s= ", op_str);
+      else if (op_str[0] == ',')
+	fprintf_filtered (stream, "%s ", op_str);
+      else
+	fprintf_filtered (stream, " %s ", op_str);
+      /* Print right operand.
+	 If operator is left-associative,
+	 increment precedence for this operand.  */
+      print_subexp (exp, pos, stream,
+		    (enum precedence) ((int) myprec + !assoc));
+    }
+
+  if ((int) myprec < (int) prec)
+    fputs_filtered (")", stream);
+}
+
+/* Return the operator corresponding to opcode OP as
+   a string.   NULL indicates that the opcode was not found in the
+   current language table.  */
+char *
+op_string(op)
+   enum exp_opcode op;
+{
+  int tem;
+  register const struct op_print *op_print_tab;
+
+  op_print_tab = current_language->la_op_print_tab;
+  for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
+    if (op_print_tab[tem].opcode == op)
+      return op_print_tab[tem].string;
+  return NULL;
+}
+
+#ifdef MAINTENANCE_CMDS
+
+/* Support for dumping the raw data from expressions in a human readable
+   form.  */
+
+static char * op_name PARAMS ((int opcode));
+
+static char *
+op_name (opcode)
+	int opcode;
+{
+  switch (opcode)
+    {
+    default:
+      {
+	static char buf[30];
+
+	sprintf (buf, "<unknown %d>", opcode);
+	return buf;
+      }
+    case OP_NULL: return "OP_NULL";
+    case BINOP_ADD: return "BINOP_ADD";
+    case BINOP_SUB: return "BINOP_SUB";
+    case BINOP_MUL: return "BINOP_MUL";
+    case BINOP_DIV: return "BINOP_DIV";
+    case BINOP_REM: return "BINOP_REM";
+    case BINOP_MOD: return "BINOP_MOD";
+    case BINOP_LSH: return "BINOP_LSH";
+    case BINOP_RSH: return "BINOP_RSH";
+    case BINOP_LOGICAL_AND: return "BINOP_LOGICAL_AND";
+    case BINOP_LOGICAL_OR: return "BINOP_LOGICAL_OR";
+    case BINOP_BITWISE_AND: return "BINOP_BITWISE_AND";
+    case BINOP_BITWISE_IOR: return "BINOP_BITWISE_IOR";
+    case BINOP_BITWISE_XOR: return "BINOP_BITWISE_XOR";
+    case BINOP_EQUAL: return "BINOP_EQUAL";
+    case BINOP_NOTEQUAL: return "BINOP_NOTEQUAL";
+    case BINOP_LESS: return "BINOP_LESS";
+    case BINOP_GTR: return "BINOP_GTR";
+    case BINOP_LEQ: return "BINOP_LEQ";
+    case BINOP_GEQ: return "BINOP_GEQ";
+    case BINOP_REPEAT: return "BINOP_REPEAT";
+    case BINOP_ASSIGN: return "BINOP_ASSIGN";
+    case BINOP_COMMA: return "BINOP_COMMA";
+    case BINOP_SUBSCRIPT: return "BINOP_SUBSCRIPT";
+    case MULTI_SUBSCRIPT: return "MULTI_SUBSCRIPT";
+    case BINOP_EXP: return "BINOP_EXP";
+    case BINOP_MIN: return "BINOP_MIN";
+    case BINOP_MAX: return "BINOP_MAX";
+    case BINOP_SCOPE: return "BINOP_SCOPE";
+    case STRUCTOP_MEMBER: return "STRUCTOP_MEMBER";
+    case STRUCTOP_MPTR: return "STRUCTOP_MPTR";
+    case BINOP_INTDIV: return "BINOP_INTDIV";
+    case BINOP_ASSIGN_MODIFY: return "BINOP_ASSIGN_MODIFY";
+    case BINOP_VAL: return "BINOP_VAL";
+    case BINOP_INCL: return "BINOP_INCL";
+    case BINOP_EXCL: return "BINOP_EXCL";
+    case BINOP_CONCAT: return "BINOP_CONCAT";
+    case BINOP_RANGE: return "BINOP_RANGE";
+    case BINOP_END: return "BINOP_END";
+    case TERNOP_COND: return "TERNOP_COND";
+    case TERNOP_SLICE: return "TERNOP_SLICE";
+    case TERNOP_SLICE_COUNT: return "TERNOP_SLICE_COUNT";
+    case OP_LONG: return "OP_LONG";
+    case OP_DOUBLE: return "OP_DOUBLE";
+    case OP_VAR_VALUE: return "OP_VAR_VALUE";
+    case OP_LAST: return "OP_LAST";
+    case OP_REGISTER: return "OP_REGISTER";
+    case OP_INTERNALVAR: return "OP_INTERNALVAR";
+    case OP_FUNCALL: return "OP_FUNCALL";
+    case OP_STRING: return "OP_STRING";
+    case OP_BITSTRING: return "OP_BITSTRING";
+    case OP_ARRAY: return "OP_ARRAY";
+    case UNOP_CAST: return "UNOP_CAST";
+    case UNOP_MEMVAL: return "UNOP_MEMVAL";
+    case UNOP_NEG: return "UNOP_NEG";
+    case UNOP_LOGICAL_NOT: return "UNOP_LOGICAL_NOT";
+    case UNOP_COMPLEMENT: return "UNOP_COMPLEMENT";
+    case UNOP_IND: return "UNOP_IND";
+    case UNOP_ADDR: return "UNOP_ADDR";
+    case UNOP_PREINCREMENT: return "UNOP_PREINCREMENT";
+    case UNOP_POSTINCREMENT: return "UNOP_POSTINCREMENT";
+    case UNOP_PREDECREMENT: return "UNOP_PREDECREMENT";
+    case UNOP_POSTDECREMENT: return "UNOP_POSTDECREMENT";
+    case UNOP_SIZEOF: return "UNOP_SIZEOF";
+    case UNOP_LOWER: return "UNOP_LOWER";
+    case UNOP_UPPER: return "UNOP_UPPER";
+    case UNOP_LENGTH: return "UNOP_LENGTH";
+    case UNOP_PLUS: return "UNOP_PLUS";
+    case UNOP_CAP: return "UNOP_CAP";
+    case UNOP_CHR: return "UNOP_CHR";
+    case UNOP_ORD: return "UNOP_ORD";
+    case UNOP_ABS: return "UNOP_ABS";
+    case UNOP_FLOAT: return "UNOP_FLOAT";
+    case UNOP_HIGH: return "UNOP_HIGH";
+    case UNOP_MAX: return "UNOP_MAX";
+    case UNOP_MIN: return "UNOP_MIN";
+    case UNOP_ODD: return "UNOP_ODD";
+    case UNOP_TRUNC: return "UNOP_TRUNC";
+    case OP_BOOL: return "OP_BOOL";
+    case OP_M2_STRING: return "OP_M2_STRING";
+    case STRUCTOP_STRUCT: return "STRUCTOP_STRUCT";
+    case STRUCTOP_PTR: return "STRUCTOP_PTR";
+    case OP_THIS: return "OP_THIS";
+    case OP_SCOPE: return "OP_SCOPE";
+    case OP_TYPE: return "OP_TYPE";
+    case OP_LABELED: return "OP_LABELED";
+    }
+}
+
+void
+dump_prefix_expression (exp, stream, note)
+     struct expression *exp;
+     GDB_FILE *stream;
+     char *note;
+{
+  int elt;
+  char *opcode_name;
+  char *eltscan;
+  int eltsize;
+
+  fprintf_filtered (stream, "Dump of expression @ ");
+  gdb_print_address (exp, stream);
+  fprintf_filtered (stream, ", %s:\nExpression: `", note);
+  if (exp->elts[0].opcode != OP_TYPE)
+    print_expression (exp, stream);
+  else
+    fprintf_filtered (stream, "Type printing not yet supported....");
+  fprintf_filtered (stream, "'\n\tLanguage %s, %d elements, %d bytes each.\n",
+		    exp->language_defn->la_name, exp -> nelts,
+		    sizeof (union exp_element));
+  fprintf_filtered (stream, "\t%5s  %20s  %16s  %s\n", "Index", "Opcode",
+		    "Hex Value", "String Value");
+  for (elt = 0; elt < exp -> nelts; elt++)
+    {
+      fprintf_filtered (stream, "\t%5d  ", elt);
+      opcode_name = op_name (exp -> elts[elt].opcode);
+
+      fprintf_filtered (stream, "%20s  ", opcode_name);
+      print_longest (stream, 'd', 0, exp -> elts[elt].longconst);
+      fprintf_filtered (stream, "  ");
+
+      for (eltscan = (char *) &exp->elts[elt],
+	     eltsize = sizeof (union exp_element) ;
+	   eltsize-- > 0;
+	   eltscan++)
+	{
+	  fprintf_filtered (stream, "%c",
+			    isprint (*eltscan) ? (*eltscan & 0xFF) : '.');
+	}
+      fprintf_filtered (stream, "\n");
+    }
+}
+
+static int dump_subexp PARAMS ((struct expression *exp, GDB_FILE *stream, int elt));
+
+static int
+dump_subexp (exp, stream, elt)
+     struct expression *exp;
+     GDB_FILE *stream;
+     int elt;
+{
+  static int indent = 0;
+  int i;
+
+  fprintf_filtered (stream, "\n");
+  fprintf_filtered (stream, "\t%5d  ", elt);
+
+  for (i = 1; i <= indent; i++)
+    fprintf_filtered (stream, " ");
+  indent += 2;
+
+  fprintf_filtered (stream, "%-20s  ", op_name (exp->elts[elt].opcode));
+
+  switch (exp -> elts[elt++].opcode)
+    {
+    case TERNOP_COND:
+    case TERNOP_SLICE:
+    case TERNOP_SLICE_COUNT:
+      elt = dump_subexp (exp, stream, elt);
+    case BINOP_ADD:
+    case BINOP_SUB:
+    case BINOP_MUL:
+    case BINOP_DIV:
+    case BINOP_REM:
+    case BINOP_MOD:
+    case BINOP_LSH:
+    case BINOP_RSH:
+    case BINOP_LOGICAL_AND:
+    case BINOP_LOGICAL_OR:
+    case BINOP_BITWISE_AND:
+    case BINOP_BITWISE_IOR:
+    case BINOP_BITWISE_XOR:
+    case BINOP_EQUAL:
+    case BINOP_NOTEQUAL:
+    case BINOP_LESS:
+    case BINOP_GTR:
+    case BINOP_LEQ:
+    case BINOP_GEQ:
+    case BINOP_REPEAT:
+    case BINOP_ASSIGN:
+    case BINOP_COMMA:
+    case BINOP_SUBSCRIPT:
+    case BINOP_EXP:
+    case BINOP_MIN:
+    case BINOP_MAX:
+    case BINOP_SCOPE:
+    case BINOP_INTDIV:
+    case BINOP_ASSIGN_MODIFY:
+    case BINOP_VAL:
+    case BINOP_INCL:
+    case BINOP_EXCL:
+    case BINOP_CONCAT:
+    case BINOP_IN:
+    case BINOP_RANGE:
+    case BINOP_END:
+      elt = dump_subexp (exp, stream, elt);
+    case UNOP_NEG:
+    case UNOP_LOGICAL_NOT:
+    case UNOP_COMPLEMENT:
+    case UNOP_IND:
+    case UNOP_ADDR:
+    case UNOP_PREINCREMENT:
+    case UNOP_POSTINCREMENT:
+    case UNOP_PREDECREMENT:
+    case UNOP_POSTDECREMENT:
+    case UNOP_SIZEOF:
+    case UNOP_PLUS:
+    case UNOP_CAP:
+    case UNOP_CHR:
+    case UNOP_ORD:
+    case UNOP_ABS:
+    case UNOP_FLOAT:
+    case UNOP_HIGH:
+    case UNOP_MAX:
+    case UNOP_MIN:
+    case UNOP_ODD:
+    case UNOP_TRUNC:
+    case UNOP_LOWER:
+    case UNOP_UPPER:
+    case UNOP_LENGTH:
+    case UNOP_CARD:
+    case UNOP_CHMAX:
+    case UNOP_CHMIN:
+      elt = dump_subexp (exp, stream, elt);
+      break;
+    case OP_LONG:
+      fprintf_filtered (stream, "Type @0x%x (", exp->elts[elt].type);
+      type_print (exp->elts[elt].type, NULL, stream, 0);
+      fprintf_filtered (stream, "), value %ld (0x%lx)",
+			(long)exp->elts[elt+1].longconst,
+			(long)exp->elts[elt+1].longconst);
+      elt += 3;
+      break;
+    case OP_DOUBLE:
+      fprintf_filtered (stream, "Type @0x%x (", exp->elts[elt].type);
+      type_print (exp->elts[elt].type, NULL, stream, 0);
+      fprintf_filtered (stream, "), value %g",
+			(double)exp->elts[elt+1].doubleconst);
+      elt += 3;
+      break;
+    case OP_VAR_VALUE:
+      fprintf_filtered (stream, "Block @0x%x, symbol @0x%x (%s)",
+			exp->elts[elt].block,
+			exp->elts[elt+1].symbol,
+			SYMBOL_NAME (exp->elts[elt+1].symbol));
+      elt += 3;
+      break;
+    case OP_LAST:
+      fprintf_filtered (stream, "History element %ld",
+			(long)exp->elts[elt].longconst);
+      elt += 2;
+      break;
+    case OP_REGISTER:
+      fprintf_filtered (stream, "Register %ld",
+			(long)exp->elts[elt].longconst);
+      elt += 2;
+      break;
+    case OP_INTERNALVAR:
+      fprintf_filtered (stream, "Internal var @0x%x (%s)",
+			exp->elts[elt].internalvar,
+			exp->elts[elt].internalvar->name);
+      elt += 2;
+      break;
+    case OP_FUNCALL:
+      {
+	int nargs;
+
+	nargs = longest_to_int (exp->elts[elt].longconst);
+
+	fprintf_filtered (stream, "Number of args: %d", nargs);
+	elt += 2;
+
+	for (i = 1; i <= nargs + 1; i++)
+	  elt = dump_subexp (exp, stream, elt);
+      }
+      break;
+    case OP_ARRAY:
+      {
+	int lower, upper;
+	int i;
+
+	lower = longest_to_int (exp->elts[elt].longconst);
+	upper = longest_to_int (exp->elts[elt + 1].longconst);
+
+	fprintf_filtered (stream, "Bounds [%d:%d]", lower, upper);
+	elt += 3;
+
+	for (i = 1; i <= upper - lower + 1; i++)
+	  elt = dump_subexp (exp, stream, elt);
+      }
+      break;
+    case UNOP_MEMVAL:
+    case UNOP_CAST:
+      fprintf_filtered (stream, "Type @0x%x (",
+			  exp->elts[elt].type);
+      type_print (exp->elts[elt].type, NULL, stream, 0);
+      fprintf_filtered (stream, ")");
+      elt = dump_subexp (exp, stream, elt + 2);
+      break;
+    case OP_TYPE:
+      fprintf_filtered (stream, "Type @0x%x (",
+			  exp->elts[elt].type);
+      type_print (exp->elts[elt].type, NULL, stream, 0);
+      fprintf_filtered (stream, ")");
+      elt += 2;
+      break;
+    case STRUCTOP_STRUCT:
+    case STRUCTOP_PTR:
+      {
+	char *elem_name;
+	int len;
+
+	len = longest_to_int (exp->elts[elt].longconst);
+	elem_name = &exp->elts[elt + 1].string;
+
+	fprintf_filtered (stream, "Element name: `%.*s'", len, elem_name);
+	elt = dump_subexp (exp, stream, elt + 3 + BYTES_TO_EXP_ELEM (len + 1));
+      }
+      break;
+    case OP_SCOPE:
+      {
+	char *elem_name;
+	int len;
+
+	fprintf_filtered (stream, "Type @0x%x (", exp->elts[elt].type);
+	type_print (exp->elts[elt].type, NULL, stream, 0);
+	fprintf_filtered (stream, ") ");
+
+	len = longest_to_int (exp->elts[elt + 1].longconst);
+	elem_name = &exp->elts[elt + 2].string;
+
+	fprintf_filtered (stream, "Field name: `%.*s'", len, elem_name);
+	elt += 4 + BYTES_TO_EXP_ELEM (len + 1);
+      }
+      break;
+    default:
+    case OP_NULL:
+    case STRUCTOP_MEMBER:
+    case STRUCTOP_MPTR:
+    case MULTI_SUBSCRIPT:
+    case OP_F77_UNDETERMINED_ARGLIST:
+    case OP_COMPLEX:
+    case OP_STRING:
+    case OP_BITSTRING:
+    case OP_BOOL:
+    case OP_M2_STRING:
+    case OP_THIS:
+    case OP_LABELED:
+    case OP_NAME:
+    case OP_EXPRSTRING:
+      fprintf_filtered (stream, "Unknown format");
+    }
+
+  indent -= 2;
+
+  return elt;
+}
+
+void
+dump_postfix_expression (exp, stream, note)
+     struct expression *exp;
+     GDB_FILE *stream;
+     char *note;
+{
+  int elt;
+
+  fprintf_filtered (stream, "Dump of expression @ ");
+  gdb_print_address (exp, stream);
+  fprintf_filtered (stream, ", %s:\nExpression: `", note);
+  if (exp->elts[0].opcode != OP_TYPE)
+    print_expression (exp, stream);
+  else
+    fputs_filtered ("Type printing not yet supported....", stream);
+  fprintf_filtered (stream, "'\n\tLanguage %s, %d elements, %d bytes each.\n",
+		    exp->language_defn->la_name, exp -> nelts,
+		    sizeof (union exp_element));
+  fputs_filtered ("\n", stream);
+
+  for (elt = 0; elt < exp -> nelts;)
+    elt = dump_subexp (exp, stream, elt);
+  fputs_filtered ("\n", stream);
+}
+
+#endif	/* MAINTENANCE_CMDS */
diff --git a/gdb/expression.h b/gdb/expression.h
new file mode 100644
index 0000000..310b2e2
--- /dev/null
+++ b/gdb/expression.h
@@ -0,0 +1,382 @@
+/* Definitions for expressions stored in reversed prefix form, for GDB.
+   Copyright 1986, 1989, 1992, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (EXPRESSION_H)
+#define EXPRESSION_H 1
+
+
+#include "symtab.h"  /* Needed for "struct block" type. */
+
+
+/* Definitions for saved C expressions.  */
+
+/* An expression is represented as a vector of union exp_element's.
+   Each exp_element is an opcode, except that some opcodes cause
+   the following exp_element to be treated as a long or double constant
+   or as a variable.  The opcodes are obeyed, using a stack for temporaries.
+   The value is left on the temporary stack at the end.  */
+
+/* When it is necessary to include a string,
+   it can occupy as many exp_elements as it needs.
+   We find the length of the string using strlen,
+   divide to find out how many exp_elements are used up,
+   and skip that many.  Strings, like numbers, are indicated
+   by the preceding opcode.  */
+
+enum exp_opcode
+{
+  /* Used when it's necessary to pass an opcode which will be ignored,
+     or to catch uninitialized values.  */
+  OP_NULL,
+
+/* BINOP_... operate on two values computed by following subexpressions,
+   replacing them by one result value.  They take no immediate arguments.  */
+
+  BINOP_ADD,		/* + */
+  BINOP_SUB,		/* - */
+  BINOP_MUL,		/* * */
+  BINOP_DIV,		/* / */
+  BINOP_REM,		/* % */
+  BINOP_MOD,		/* mod (Knuth 1.2.4) */
+  BINOP_LSH,		/* << */
+  BINOP_RSH,		/* >> */
+  BINOP_LOGICAL_AND,	/* && */
+  BINOP_LOGICAL_OR,	/* || */
+  BINOP_BITWISE_AND,	/* & */
+  BINOP_BITWISE_IOR,	/* | */
+  BINOP_BITWISE_XOR,	/* ^ */
+  BINOP_EQUAL,		/* == */
+  BINOP_NOTEQUAL,	/* != */
+  BINOP_LESS,		/* < */
+  BINOP_GTR,		/* > */
+  BINOP_LEQ,		/* <= */
+  BINOP_GEQ,		/* >= */
+  BINOP_REPEAT,		/* @ */
+  BINOP_ASSIGN,		/* = */
+  BINOP_COMMA,		/* , */
+  BINOP_SUBSCRIPT,	/* x[y] */
+  BINOP_EXP,		/* Exponentiation */
+
+  /* C++.  */
+
+  BINOP_MIN,		/* <? */
+  BINOP_MAX,		/* >? */
+  BINOP_SCOPE,		/* :: */
+
+  /* STRUCTOP_MEMBER is used for pointer-to-member constructs.
+     X . * Y translates into X STRUCTOP_MEMBER Y.  */
+  STRUCTOP_MEMBER,
+
+  /* STRUCTOP_MPTR is used for pointer-to-member constructs
+     when X is a pointer instead of an aggregate.  */
+  STRUCTOP_MPTR,
+
+  /* end of C++.  */
+
+  /* For Modula-2 integer division DIV */
+  BINOP_INTDIV,
+
+  BINOP_ASSIGN_MODIFY,	/* +=, -=, *=, and so on.
+			   The following exp_element is another opcode,
+			   a BINOP_, saying how to modify.
+			   Then comes another BINOP_ASSIGN_MODIFY,
+			   making three exp_elements in total.  */
+
+  /* Modula-2 standard (binary) procedures */
+  BINOP_VAL,
+  BINOP_INCL,
+  BINOP_EXCL,
+
+  /* Concatenate two operands, such as character strings or bitstrings.
+     If the first operand is a integer expression, then it means concatenate
+     the second operand with itself that many times. */
+  BINOP_CONCAT,
+
+  /* For Chill and Pascal. */
+  BINOP_IN, /* Returns 1 iff ARG1 IN ARG2. */
+
+  /* This is the "colon operator" used various places in Chill. */
+  BINOP_RANGE,
+
+  /* This must be the highest BINOP_ value, for expprint.c.  */
+  BINOP_END,
+
+  /* Operates on three values computed by following subexpressions.  */
+  TERNOP_COND,		/* ?: */
+
+  /* A sub-string/sub-array.  Chill syntax:  OP1(OP2:OP3).
+     Return elements OP2 through OP3 of OP1.  */
+  TERNOP_SLICE,
+
+  /* A sub-string/sub-array.  Chill syntax:  OP1(OP2 UP OP3).
+     Return OP3 elements of OP1, starting with element OP2. */
+  TERNOP_SLICE_COUNT,
+
+  /* Multidimensional subscript operator, such as Modula-2 x[a,b,...].
+     The dimensionality is encoded in the operator, like the number of
+     function arguments in OP_FUNCALL, I.E. <OP><dimension><OP>.
+     The value of the first following subexpression is subscripted
+     by each of the next following subexpressions, one per dimension. */
+   MULTI_SUBSCRIPT,
+
+  /* The OP_... series take immediate following arguments.
+     After the arguments come another OP_... (the same one)
+     so that the grouping can be recognized from the end.  */
+
+  /* OP_LONG is followed by a type pointer in the next exp_element
+     and the long constant value in the following exp_element.
+     Then comes another OP_LONG.
+     Thus, the operation occupies four exp_elements.  */
+  OP_LONG,
+
+  /* OP_DOUBLE is similar but takes a DOUBLEST constant instead of a long.  */
+  OP_DOUBLE,
+
+  /* OP_VAR_VALUE takes one struct block * in the following element,
+     and one struct symbol * in the following exp_element, followed by
+     another OP_VAR_VALUE, making four exp_elements.  If the block is
+     non-NULL, evaluate the symbol relative to the innermost frame
+     executing in that block; if the block is NULL use the selected frame.  */
+  OP_VAR_VALUE,
+
+  /* OP_LAST is followed by an integer in the next exp_element.
+     The integer is zero for the last value printed,
+     or it is the absolute number of a history element.
+     With another OP_LAST at the end, this makes three exp_elements.  */
+  OP_LAST,
+
+  /* OP_REGISTER is followed by an integer in the next exp_element.
+     This is the number of a register to fetch (as an int).
+     With another OP_REGISTER at the end, this makes three exp_elements.  */
+  OP_REGISTER,
+
+  /* OP_INTERNALVAR is followed by an internalvar ptr in the next exp_element.
+     With another OP_INTERNALVAR at the end, this makes three exp_elements.  */
+  OP_INTERNALVAR,
+
+  /* OP_FUNCALL is followed by an integer in the next exp_element.
+     The integer is the number of args to the function call.
+     That many plus one values from following subexpressions
+     are used, the first one being the function.
+     The integer is followed by a repeat of OP_FUNCALL,
+     making three exp_elements.  */
+  OP_FUNCALL,
+
+  /* This is EXACTLY like OP_FUNCALL but is semantically different.  
+     In F77, array subscript expressions, substring expressions
+     and function calls are  all exactly the same syntactically. They may 
+     only be dismabiguated at runtime.  Thus this operator, which 
+     indicates that we have found something of the form <name> ( <stuff> ) */ 
+  OP_F77_UNDETERMINED_ARGLIST,
+  
+  /* The following OP is a special one, it introduces a F77 complex
+     literal. It is followed by exactly two args that are doubles.  */ 
+  OP_COMPLEX,
+
+  /* OP_STRING represents a string constant.
+     Its format is the same as that of a STRUCTOP, but the string
+     data is just made into a string constant when the operation
+     is executed.  */
+  OP_STRING,
+
+  /* OP_BITSTRING represents a packed bitstring constant.
+     Its format is the same as that of a STRUCTOP, but the bitstring
+     data is just made into a bitstring constant when the operation
+     is executed.  */
+  OP_BITSTRING,
+
+  /* OP_ARRAY creates an array constant out of the following subexpressions.
+     It is followed by two exp_elements, the first containing an integer
+     that is the lower bound of the array and the second containing another
+     integer that is the upper bound of the array.  The second integer is
+     followed by a repeat of OP_ARRAY, making four exp_elements total.
+     The bounds are used to compute the number of following subexpressions
+     to consume, as well as setting the bounds in the created array constant.
+     The type of the elements is taken from the type of the first subexp,
+     and they must all match. */
+  OP_ARRAY,
+
+  /* UNOP_CAST is followed by a type pointer in the next exp_element.
+     With another UNOP_CAST at the end, this makes three exp_elements.
+     It casts the value of the following subexpression.  */
+  UNOP_CAST,
+
+  /* UNOP_MEMVAL is followed by a type pointer in the next exp_element
+     With another UNOP_MEMVAL at the end, this makes three exp_elements.
+     It casts the contents of the word addressed by the value of the
+     following subexpression.  */
+  UNOP_MEMVAL,
+
+  /* UNOP_... operate on one value from a following subexpression
+     and replace it with a result.  They take no immediate arguments.  */
+
+  UNOP_NEG,		/* Unary - */
+  UNOP_LOGICAL_NOT,	/* Unary ! */
+  UNOP_COMPLEMENT,	/* Unary ~ */
+  UNOP_IND,		/* Unary * */
+  UNOP_ADDR,		/* Unary & */
+  UNOP_PREINCREMENT,	/* ++ before an expression */
+  UNOP_POSTINCREMENT,	/* ++ after an expression */
+  UNOP_PREDECREMENT,	/* -- before an expression */
+  UNOP_POSTDECREMENT,	/* -- after an expression */
+  UNOP_SIZEOF,		/* Unary sizeof (followed by expression) */
+
+  UNOP_PLUS,		/* Unary plus */
+
+  UNOP_CAP,		/* Modula-2 standard (unary) procedures */
+  UNOP_CHR,
+  UNOP_ORD,
+  UNOP_ABS,
+  UNOP_FLOAT,
+  UNOP_HIGH,
+  UNOP_MAX,
+  UNOP_MIN,
+  UNOP_ODD,
+  UNOP_TRUNC,
+
+  /* Chill builtin functions. */
+  UNOP_LOWER, UNOP_UPPER, UNOP_LENGTH, UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN,
+
+  OP_BOOL,		/* Modula-2 builtin BOOLEAN type */
+  OP_M2_STRING,		/* Modula-2 string constants */
+
+  /* STRUCTOP_... operate on a value from a following subexpression
+     by extracting a structure component specified by a string
+     that appears in the following exp_elements (as many as needed).
+     STRUCTOP_STRUCT is used for "." and STRUCTOP_PTR for "->".
+     They differ only in the error message given in case the value is
+     not suitable or the structure component specified is not found.
+
+     The length of the string follows the opcode, followed by
+     BYTES_TO_EXP_ELEM(length) elements containing the data of the
+     string, followed by the length again and the opcode again.  */
+
+  STRUCTOP_STRUCT,
+  STRUCTOP_PTR,
+
+  /* C++ */
+  /* OP_THIS is just a placeholder for the class instance variable.
+     It just comes in a tight (OP_THIS, OP_THIS) pair.  */
+  OP_THIS,
+
+  /* OP_SCOPE surrounds a type name and a field name.  The type
+     name is encoded as one element, but the field name stays as
+     a string, which, of course, is variable length.  */
+  OP_SCOPE,
+
+  /* Used to represent named structure field values in brace initializers
+     (or tuples as they are called in Chill).
+     The gcc C syntax is NAME:VALUE or .NAME=VALUE, the Chill syntax is
+     .NAME:VALUE.  Multiple labels (as in the Chill syntax
+     .NAME1,.NAME2:VALUE) is represented as if it were
+     .NAME1:(.NAME2:VALUE) (though that is not valid Chill syntax).
+
+     The NAME is represented as for STRUCTOP_STRUCT;  VALUE follows. */
+  OP_LABELED,
+
+  /* OP_TYPE is for parsing types, and used with the "ptype" command
+     so we can look up types that are qualified by scope, either with
+     the GDB "::" operator, or the Modula-2 '.' operator. */
+  OP_TYPE,
+
+  /* An un-looked-up identifier. */
+  OP_NAME,
+
+  /* An unparsed expression.  Used for Scheme (for now at least) */
+  OP_EXPRSTRING
+};
+
+union exp_element
+{
+  enum exp_opcode opcode;
+  struct symbol *symbol;
+  LONGEST longconst;
+  DOUBLEST doubleconst;
+  /* Really sizeof (union exp_element) characters (or less for the last
+     element of a string).  */
+  char string;
+  struct type *type;
+  struct internalvar *internalvar;
+  struct block *block;
+};
+
+struct expression
+{
+  const struct language_defn *language_defn;  /* language it was entered in */
+  int nelts;
+  union exp_element elts[1];
+};
+
+/* Macros for converting between number of expression elements and bytes
+   to store that many expression elements. */
+
+#define EXP_ELEM_TO_BYTES(elements) \
+    ((elements) * sizeof (union exp_element))
+#define BYTES_TO_EXP_ELEM(bytes) \
+    (((bytes) + sizeof (union exp_element) - 1) / sizeof (union exp_element))
+
+/* From parse.c */
+
+extern struct expression *parse_expression PARAMS ((char *));
+
+extern struct expression *parse_exp_1 PARAMS ((char **, struct block *, int));
+
+/* The innermost context required by the stack and register variables
+   we've encountered so far.  To use this, set it to NULL, then call
+   parse_<whatever>, then look at it.  */
+extern struct block *innermost_block;
+
+/* From eval.c */
+
+/* Values of NOSIDE argument to eval_subexp.  */
+
+enum noside
+{
+  EVAL_NORMAL,
+  EVAL_SKIP,			/* Only effect is to increment pos.  */
+  EVAL_AVOID_SIDE_EFFECTS	/* Don't modify any variables or
+				   call any functions.  The value
+				   returned will have the correct
+				   type, and will have an
+				   approximately correct lvalue
+				   type (inaccuracy: anything that is
+				   listed as being in a register in
+				   the function in which it was
+				   declared will be lval_register).  */
+};
+
+extern struct value* evaluate_subexp_standard
+PARAMS ((struct type *, struct expression *, int*, enum noside));
+
+/* From expprint.c */
+
+extern void print_expression PARAMS ((struct expression *, GDB_FILE *));
+
+extern char *op_string PARAMS ((enum exp_opcode));
+
+#ifdef MAINTENANCE_CMDS
+extern void dump_prefix_expression PARAMS ((struct expression *,
+					    GDB_FILE *,
+					    char *));
+extern void dump_postfix_expression PARAMS ((struct expression *,
+					     GDB_FILE *,
+					     char *));
+#endif /* MAINTENANCE_CMDS */
+
+#endif	/* !defined (EXPRESSION_H) */
diff --git a/gdb/f-exp.y b/gdb/f-exp.y
new file mode 100644
index 0000000..4a1f747
--- /dev/null
+++ b/gdb/f-exp.y
@@ -0,0 +1,1174 @@
+/* YACC parser for Fortran expressions, for GDB.
+   Copyright 1986, 1989, 1990, 1991, 1993, 1994
+             Free Software Foundation, Inc.
+   Contributed by Motorola.  Adapted from the C parser by Farooq Butt
+   (fmbutt@engage.sps.mot.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This was blantantly ripped off the C expression parser, please 
+   be aware of that as you look at its basic structure -FMB */ 
+
+/* Parse a F77 expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.
+
+   Note that malloc's and realloc's in this file are transformed to
+   xmalloc and xrealloc respectively by the same sed command in the
+   makefile that remaps any other malloc/realloc inserted by the parser
+   generator.  Doing this with #defines and trying to control the interaction
+   with include files (<malloc.h> and <stdlib.h> for example) just became
+   too messy, particularly when such includes can be inserted at random
+   times by the parser generator.  */
+   
+%{
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "expression.h"
+#include "value.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "f-lang.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h" /* For have_full_symbols and have_partial_symbols */
+
+/* Remap normal yacc parser interface names (yyparse, yylex, yyerror, etc),
+   as well as gratuitiously global symbol names, so we can have multiple
+   yacc generated parsers in gdb.  Note that these are only the variables
+   produced by yacc.  If other parser generators (bison, byacc, etc) produce
+   additional global names that conflict at link time, then those parser
+   generators need to be fixed instead of adding those names to this list. */
+
+#define	yymaxdepth f_maxdepth
+#define	yyparse	f_parse
+#define	yylex	f_lex
+#define	yyerror	f_error
+#define	yylval	f_lval
+#define	yychar	f_char
+#define	yydebug	f_debug
+#define	yypact	f_pact	
+#define	yyr1	f_r1			
+#define	yyr2	f_r2			
+#define	yydef	f_def		
+#define	yychk	f_chk		
+#define	yypgo	f_pgo		
+#define	yyact	f_act		
+#define	yyexca	f_exca
+#define yyerrflag f_errflag
+#define yynerrs	f_nerrs
+#define	yyps	f_ps
+#define	yypv	f_pv
+#define	yys	f_s
+#define	yy_yys	f_yys
+#define	yystate	f_state
+#define	yytmp	f_tmp
+#define	yyv	f_v
+#define	yy_yyv	f_yyv
+#define	yyval	f_val
+#define	yylloc	f_lloc
+#define yyreds	f_reds		/* With YYDEBUG defined */
+#define yytoks	f_toks		/* With YYDEBUG defined */
+#define yylhs	f_yylhs
+#define yylen	f_yylen
+#define yydefred f_yydefred
+#define yydgoto	f_yydgoto
+#define yysindex f_yysindex
+#define yyrindex f_yyrindex
+#define yygindex f_yygindex
+#define yytable	 f_yytable
+#define yycheck	 f_yycheck
+
+#ifndef YYDEBUG
+#define	YYDEBUG	1		/* Default to no yydebug support */
+#endif
+
+int yyparse PARAMS ((void));
+
+static int yylex PARAMS ((void));
+
+void yyerror PARAMS ((char *));
+
+static void growbuf_by_size PARAMS ((int));
+
+static int match_string_literal PARAMS ((void));
+
+%}
+
+/* Although the yacc "value" of an expression is not used,
+   since the result is stored in the structure being created,
+   other node types do have values.  */
+
+%union
+  {
+    LONGEST lval;
+    struct {
+      LONGEST val;
+      struct type *type;
+    } typed_val;
+    DOUBLEST dval;
+    struct symbol *sym;
+    struct type *tval;
+    struct stoken sval;
+    struct ttype tsym;
+    struct symtoken ssym;
+    int voidval;
+    struct block *bval;
+    enum exp_opcode opcode;
+    struct internalvar *ivar;
+
+    struct type **tvec;
+    int *ivec;
+  }
+
+%{
+/* YYSTYPE gets defined by %union */
+static int parse_number PARAMS ((char *, int, int, YYSTYPE *));
+%}
+
+%type <voidval> exp  type_exp start variable 
+%type <tval> type typebase
+%type <tvec> nonempty_typelist
+/* %type <bval> block */
+
+/* Fancy type parsing.  */
+%type <voidval> func_mod direct_abs_decl abs_decl
+%type <tval> ptype
+
+%token <typed_val> INT
+%token <dval> FLOAT
+
+/* Both NAME and TYPENAME tokens represent symbols in the input,
+   and both convey their data as strings.
+   But a TYPENAME is a string that happens to be defined as a typedef
+   or builtin type name (such as int or char)
+   and a NAME is any other symbol.
+   Contexts where this distinction is not important can use the
+   nonterminal "name", which matches either NAME or TYPENAME.  */
+
+%token <sval> STRING_LITERAL
+%token <lval> BOOLEAN_LITERAL
+%token <ssym> NAME 
+%token <tsym> TYPENAME
+%type <sval> name
+%type <ssym> name_not_typename
+%type <tsym> typename
+
+/* A NAME_OR_INT is a symbol which is not known in the symbol table,
+   but which would parse as a valid number in the current input radix.
+   E.g. "c" when input_radix==16.  Depending on the parse, it will be
+   turned into a name or into a number.  */
+
+%token <ssym> NAME_OR_INT 
+
+%token  SIZEOF 
+%token ERROR
+
+/* Special type cases, put in to allow the parser to distinguish different
+   legal basetypes.  */
+%token INT_KEYWORD INT_S2_KEYWORD LOGICAL_S1_KEYWORD LOGICAL_S2_KEYWORD 
+%token LOGICAL_KEYWORD REAL_KEYWORD REAL_S8_KEYWORD REAL_S16_KEYWORD 
+%token COMPLEX_S8_KEYWORD COMPLEX_S16_KEYWORD COMPLEX_S32_KEYWORD 
+%token BOOL_AND BOOL_OR BOOL_NOT   
+%token <lval> CHARACTER 
+
+%token <voidval> VARIABLE
+
+%token <opcode> ASSIGN_MODIFY
+
+%left ','
+%left ABOVE_COMMA
+%right '=' ASSIGN_MODIFY
+%right '?'
+%left BOOL_OR
+%right BOOL_NOT
+%left BOOL_AND
+%left '|'
+%left '^'
+%left '&'
+%left EQUAL NOTEQUAL
+%left LESSTHAN GREATERTHAN LEQ GEQ
+%left LSH RSH
+%left '@'
+%left '+' '-'
+%left '*' '/' '%'
+%right UNARY 
+%right '('
+
+
+%%
+
+start   :	exp
+	|	type_exp
+	;
+
+type_exp:	type
+			{ write_exp_elt_opcode(OP_TYPE);
+			  write_exp_elt_type($1);
+			  write_exp_elt_opcode(OP_TYPE); }
+	;
+
+exp     :       '(' exp ')'
+        		{ }
+        ;
+
+/* Expressions, not including the comma operator.  */
+exp	:	'*' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_IND); }
+
+exp	:	'&' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_ADDR); }
+
+exp	:	'-' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_NEG); }
+	;
+
+exp	:	BOOL_NOT exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_LOGICAL_NOT); }
+	;
+
+exp	:	'~' exp    %prec UNARY
+			{ write_exp_elt_opcode (UNOP_COMPLEMENT); }
+	;
+
+exp	:	SIZEOF exp       %prec UNARY
+			{ write_exp_elt_opcode (UNOP_SIZEOF); }
+	;
+
+/* No more explicit array operators, we treat everything in F77 as 
+   a function call.  The disambiguation as to whether we are 
+   doing a subscript operation or a function call is done 
+   later in eval.c.  */
+
+exp	:	exp '(' 
+			{ start_arglist (); }
+		arglist ')'	
+			{ write_exp_elt_opcode (OP_F77_UNDETERMINED_ARGLIST);
+			  write_exp_elt_longcst ((LONGEST) end_arglist ());
+			  write_exp_elt_opcode (OP_F77_UNDETERMINED_ARGLIST); }
+	;
+
+arglist	:
+	;
+
+arglist	:	exp
+			{ arglist_len = 1; }
+	;
+
+arglist :      substring
+                        { arglist_len = 2;}
+   
+arglist	:	arglist ',' exp   %prec ABOVE_COMMA
+			{ arglist_len++; }
+	;
+
+substring:	exp ':' exp   %prec ABOVE_COMMA
+			{ } 
+	;
+
+
+complexnum:     exp ',' exp 
+                	{ }                          
+        ;
+
+exp	:	'(' complexnum ')'
+                	{ write_exp_elt_opcode(OP_COMPLEX); }
+	;
+
+exp	:	'(' type ')' exp  %prec UNARY
+			{ write_exp_elt_opcode (UNOP_CAST);
+			  write_exp_elt_type ($2);
+			  write_exp_elt_opcode (UNOP_CAST); }
+	;
+
+/* Binary operators in order of decreasing precedence.  */
+
+exp	:	exp '@' exp
+			{ write_exp_elt_opcode (BINOP_REPEAT); }
+	;
+
+exp	:	exp '*' exp
+			{ write_exp_elt_opcode (BINOP_MUL); }
+	;
+
+exp	:	exp '/' exp
+			{ write_exp_elt_opcode (BINOP_DIV); }
+	;
+
+exp	:	exp '%' exp
+			{ write_exp_elt_opcode (BINOP_REM); }
+	;
+
+exp	:	exp '+' exp
+			{ write_exp_elt_opcode (BINOP_ADD); }
+	;
+
+exp	:	exp '-' exp
+			{ write_exp_elt_opcode (BINOP_SUB); }
+	;
+
+exp	:	exp LSH exp
+			{ write_exp_elt_opcode (BINOP_LSH); }
+	;
+
+exp	:	exp RSH exp
+			{ write_exp_elt_opcode (BINOP_RSH); }
+	;
+
+exp	:	exp EQUAL exp
+			{ write_exp_elt_opcode (BINOP_EQUAL); }
+	;
+
+exp	:	exp NOTEQUAL exp
+			{ write_exp_elt_opcode (BINOP_NOTEQUAL); }
+	;
+
+exp	:	exp LEQ exp
+			{ write_exp_elt_opcode (BINOP_LEQ); }
+	;
+
+exp	:	exp GEQ exp
+			{ write_exp_elt_opcode (BINOP_GEQ); }
+	;
+
+exp	:	exp LESSTHAN exp
+			{ write_exp_elt_opcode (BINOP_LESS); }
+	;
+
+exp	:	exp GREATERTHAN exp
+			{ write_exp_elt_opcode (BINOP_GTR); }
+	;
+
+exp	:	exp '&' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_AND); }
+	;
+
+exp	:	exp '^' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_XOR); }
+	;
+
+exp	:	exp '|' exp
+			{ write_exp_elt_opcode (BINOP_BITWISE_IOR); }
+	;
+
+exp     :       exp BOOL_AND exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_AND); }
+	;
+
+
+exp	:	exp BOOL_OR exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_OR); }
+	;
+
+exp	:	exp '=' exp
+			{ write_exp_elt_opcode (BINOP_ASSIGN); }
+	;
+
+exp	:	exp ASSIGN_MODIFY exp
+			{ write_exp_elt_opcode (BINOP_ASSIGN_MODIFY);
+			  write_exp_elt_opcode ($2);
+			  write_exp_elt_opcode (BINOP_ASSIGN_MODIFY); }
+	;
+
+exp	:	INT
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type ($1.type);
+			  write_exp_elt_longcst ((LONGEST)($1.val));
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	NAME_OR_INT
+			{ YYSTYPE val;
+			  parse_number ($1.stoken.ptr, $1.stoken.length, 0, &val);
+			  write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (val.typed_val.type);
+			  write_exp_elt_longcst ((LONGEST)val.typed_val.val);
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	FLOAT
+			{ write_exp_elt_opcode (OP_DOUBLE);
+			  write_exp_elt_type (builtin_type_f_real_s8);
+			  write_exp_elt_dblcst ($1);
+			  write_exp_elt_opcode (OP_DOUBLE); }
+	;
+
+exp	:	variable
+	;
+
+exp	:	VARIABLE
+	;
+
+exp	:	SIZEOF '(' type ')'	%prec UNARY
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_f_integer);
+			  CHECK_TYPEDEF ($3);
+			  write_exp_elt_longcst ((LONGEST) TYPE_LENGTH ($3));
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp     :       BOOLEAN_LITERAL
+			{ write_exp_elt_opcode (OP_BOOL);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_BOOL);
+			}
+        ;
+
+exp	:	STRING_LITERAL
+			{
+			  write_exp_elt_opcode (OP_STRING);
+			  write_exp_string ($1);
+			  write_exp_elt_opcode (OP_STRING);
+			}
+	;
+
+variable:	name_not_typename
+			{ struct symbol *sym = $1.sym;
+
+			  if (sym)
+			    {
+			      if (symbol_read_needs_frame (sym))
+				{
+				  if (innermost_block == 0 ||
+				      contained_in (block_found, 
+						    innermost_block))
+				    innermost_block = block_found;
+				}
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      /* We want to use the selected frame, not
+				 another more inner frame which happens to
+				 be in the same block.  */
+			      write_exp_elt_block (NULL);
+			      write_exp_elt_sym (sym);
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      break;
+			    }
+			  else
+			    {
+			      struct minimal_symbol *msymbol;
+			      register char *arg = copy_name ($1.stoken);
+
+			      msymbol =
+				lookup_minimal_symbol (arg, NULL, NULL);
+			      if (msymbol != NULL)
+				{
+				  write_exp_msymbol (msymbol,
+						     lookup_function_type (builtin_type_int),
+						     builtin_type_int);
+				}
+			      else if (!have_full_symbols () && !have_partial_symbols ())
+				error ("No symbol table is loaded.  Use the \"file\" command.");
+			      else
+				error ("No symbol \"%s\" in current context.",
+				       copy_name ($1.stoken));
+			    }
+			}
+	;
+
+
+type    :       ptype
+        ;
+
+ptype	:	typebase
+	|	typebase abs_decl
+		{
+		  /* This is where the interesting stuff happens.  */
+		  int done = 0;
+		  int array_size;
+		  struct type *follow_type = $1;
+		  struct type *range_type;
+		  
+		  while (!done)
+		    switch (pop_type ())
+		      {
+		      case tp_end:
+			done = 1;
+			break;
+		      case tp_pointer:
+			follow_type = lookup_pointer_type (follow_type);
+			break;
+		      case tp_reference:
+			follow_type = lookup_reference_type (follow_type);
+			break;
+		      case tp_array:
+			array_size = pop_type_int ();
+			if (array_size != -1)
+			  {
+			    range_type =
+			      create_range_type ((struct type *) NULL,
+						 builtin_type_f_integer, 0,
+						 array_size - 1);
+			    follow_type =
+			      create_array_type ((struct type *) NULL,
+						 follow_type, range_type);
+			  }
+			else
+			  follow_type = lookup_pointer_type (follow_type);
+			break;
+		      case tp_function:
+			follow_type = lookup_function_type (follow_type);
+			break;
+		      }
+		  $$ = follow_type;
+		}
+	;
+
+abs_decl:	'*'
+			{ push_type (tp_pointer); $$ = 0; }
+	|	'*' abs_decl
+			{ push_type (tp_pointer); $$ = $2; }
+	|	'&'
+			{ push_type (tp_reference); $$ = 0; }
+	|	'&' abs_decl
+			{ push_type (tp_reference); $$ = $2; }
+	|	direct_abs_decl
+	;
+
+direct_abs_decl: '(' abs_decl ')'
+			{ $$ = $2; }
+	| 	direct_abs_decl func_mod
+			{ push_type (tp_function); }
+	|	func_mod
+			{ push_type (tp_function); }
+	;
+
+func_mod:	'(' ')'
+			{ $$ = 0; }
+	|	'(' nonempty_typelist ')'
+			{ free ((PTR)$2); $$ = 0; }
+	;
+
+typebase  /* Implements (approximately): (type-qualifier)* type-specifier */
+	:	TYPENAME
+			{ $$ = $1.type; }
+	|	INT_KEYWORD
+			{ $$ = builtin_type_f_integer; }
+	|	INT_S2_KEYWORD 
+			{ $$ = builtin_type_f_integer_s2; }
+	|	CHARACTER 
+			{ $$ = builtin_type_f_character; }
+	|	LOGICAL_KEYWORD 
+			{ $$ = builtin_type_f_logical;} 
+	|	LOGICAL_S2_KEYWORD
+			{ $$ = builtin_type_f_logical_s2;}
+	|	LOGICAL_S1_KEYWORD 
+			{ $$ = builtin_type_f_logical_s1;}
+	|	REAL_KEYWORD 
+			{ $$ = builtin_type_f_real;}
+	|       REAL_S8_KEYWORD
+			{ $$ = builtin_type_f_real_s8;}
+	|	REAL_S16_KEYWORD
+			{ $$ = builtin_type_f_real_s16;}
+	|	COMPLEX_S8_KEYWORD
+			{ $$ = builtin_type_f_complex_s8;}
+	|	COMPLEX_S16_KEYWORD 
+			{ $$ = builtin_type_f_complex_s16;}
+	|	COMPLEX_S32_KEYWORD 
+			{ $$ = builtin_type_f_complex_s32;}
+	;
+
+typename:	TYPENAME
+	;
+
+nonempty_typelist
+	:	type
+		{ $$ = (struct type **) malloc (sizeof (struct type *) * 2);
+		  $<ivec>$[0] = 1;	/* Number of types in vector */
+		  $$[1] = $1;
+		}
+	|	nonempty_typelist ',' type
+		{ int len = sizeof (struct type *) * (++($<ivec>1[0]) + 1);
+		  $$ = (struct type **) realloc ((char *) $1, len);
+		  $$[$<ivec>$[0]] = $3;
+		}
+	;
+
+name	:	NAME
+			{ $$ = $1.stoken; }
+	|	TYPENAME
+			{ $$ = $1.stoken; }
+	|	NAME_OR_INT
+			{ $$ = $1.stoken; }
+	;
+
+name_not_typename :	NAME
+/* These would be useful if name_not_typename was useful, but it is just
+   a fake for "variable", so these cause reduce/reduce conflicts because
+   the parser can't tell whether NAME_OR_INT is a name_not_typename (=variable,
+   =exp) or just an exp.  If name_not_typename was ever used in an lvalue
+   context where only a name could occur, this might be useful.
+  	|	NAME_OR_INT
+   */
+	;
+
+%%
+
+/* Take care of parsing a number (anything that starts with a digit).
+   Set yylval and return the token type; update lexptr.
+   LEN is the number of characters in it.  */
+
+/*** Needs some error checking for the float case ***/
+
+static int
+parse_number (p, len, parsed_float, putithere)
+     register char *p;
+     register int len;
+     int parsed_float;
+     YYSTYPE *putithere;
+{
+  register LONGEST n = 0;
+  register LONGEST prevn = 0;
+  register int i;
+  register int c;
+  register int base = input_radix;
+  int unsigned_p = 0;
+  int long_p = 0;
+  ULONGEST high_bit;
+  struct type *signed_type;
+  struct type *unsigned_type;
+
+  if (parsed_float)
+    {
+      /* It's a float since it contains a point or an exponent.  */
+      /* [dD] is not understood as an exponent by atof, change it to 'e'.  */
+      char *tmp, *tmp2;
+
+      tmp = strsave (p);
+      for (tmp2 = tmp; *tmp2; ++tmp2)
+	if (*tmp2 == 'd' || *tmp2 == 'D')
+	  *tmp2 = 'e';
+      putithere->dval = atof (tmp);
+      free (tmp);
+      return FLOAT;
+    }
+
+  /* Handle base-switching prefixes 0x, 0t, 0d, 0 */
+  if (p[0] == '0')
+    switch (p[1])
+      {
+      case 'x':
+      case 'X':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 16;
+	    len -= 2;
+	  }
+	break;
+	
+      case 't':
+      case 'T':
+      case 'd':
+      case 'D':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 10;
+	    len -= 2;
+	  }
+	break;
+	
+      default:
+	base = 8;
+	break;
+      }
+  
+  while (len-- > 0)
+    {
+      c = *p++;
+      if (c >= 'A' && c <= 'Z')
+	c += 'a' - 'A';
+      if (c != 'l' && c != 'u')
+	n *= base;
+      if (c >= '0' && c <= '9')
+	n += i = c - '0';
+      else
+	{
+	  if (base > 10 && c >= 'a' && c <= 'f')
+	    n += i = c - 'a' + 10;
+	  else if (len == 0 && c == 'l') 
+            long_p = 1;
+	  else if (len == 0 && c == 'u')
+	    unsigned_p = 1;
+	  else
+	    return ERROR;	/* Char not a digit */
+	}
+      if (i >= base)
+	return ERROR;		/* Invalid digit in this base */
+      
+      /* Portably test for overflow (only works for nonzero values, so make
+	 a second check for zero).  */
+      if ((prevn >= n) && n != 0)
+	unsigned_p=1;		/* Try something unsigned */
+      /* If range checking enabled, portably test for unsigned overflow.  */
+      if (RANGE_CHECK && n != 0)
+	{
+	  if ((unsigned_p && (unsigned)prevn >= (unsigned)n))
+	    range_error("Overflow on numeric constant.");	 
+	}
+      prevn = n;
+    }
+  
+  /* If the number is too big to be an int, or it's got an l suffix
+     then it's a long.  Work out if this has to be a long by
+     shifting right and and seeing if anything remains, and the
+     target int size is different to the target long size.
+     
+     In the expression below, we could have tested
+     (n >> TARGET_INT_BIT)
+     to see if it was zero,
+     but too many compilers warn about that, when ints and longs
+     are the same size.  So we shift it twice, with fewer bits
+     each time, for the same result.  */
+  
+  if ((TARGET_INT_BIT != TARGET_LONG_BIT 
+       && ((n >> 2) >> (TARGET_INT_BIT-2)))   /* Avoid shift warning */
+      || long_p)
+    {
+      high_bit = ((ULONGEST)1) << (TARGET_LONG_BIT-1);
+      unsigned_type = builtin_type_unsigned_long;
+      signed_type = builtin_type_long;
+    }
+  else 
+    {
+      high_bit = ((ULONGEST)1) << (TARGET_INT_BIT-1);
+      unsigned_type = builtin_type_unsigned_int;
+      signed_type = builtin_type_int;
+    }    
+  
+  putithere->typed_val.val = n;
+  
+  /* If the high bit of the worked out type is set then this number
+     has to be unsigned. */
+  
+  if (unsigned_p || (n & high_bit)) 
+    putithere->typed_val.type = unsigned_type;
+  else 
+    putithere->typed_val.type = signed_type;
+  
+  return INT;
+}
+
+struct token
+{
+  char *operator;
+  int token;
+  enum exp_opcode opcode;
+};
+
+static const struct token dot_ops[] =
+{
+  { ".and.", BOOL_AND, BINOP_END },
+  { ".AND.", BOOL_AND, BINOP_END },
+  { ".or.", BOOL_OR, BINOP_END },
+  { ".OR.", BOOL_OR, BINOP_END },
+  { ".not.", BOOL_NOT, BINOP_END },
+  { ".NOT.", BOOL_NOT, BINOP_END },
+  { ".eq.", EQUAL, BINOP_END },
+  { ".EQ.", EQUAL, BINOP_END },
+  { ".eqv.", EQUAL, BINOP_END },
+  { ".NEQV.", NOTEQUAL, BINOP_END },
+  { ".neqv.", NOTEQUAL, BINOP_END },
+  { ".EQV.", EQUAL, BINOP_END },
+  { ".ne.", NOTEQUAL, BINOP_END },
+  { ".NE.", NOTEQUAL, BINOP_END },
+  { ".le.", LEQ, BINOP_END },
+  { ".LE.", LEQ, BINOP_END },
+  { ".ge.", GEQ, BINOP_END },
+  { ".GE.", GEQ, BINOP_END },
+  { ".gt.", GREATERTHAN, BINOP_END },
+  { ".GT.", GREATERTHAN, BINOP_END },
+  { ".lt.", LESSTHAN, BINOP_END },
+  { ".LT.", LESSTHAN, BINOP_END },
+  { NULL, 0, 0 }
+};
+
+struct f77_boolean_val 
+{
+  char *name;
+  int value;
+}; 
+
+static const struct f77_boolean_val boolean_values[]  = 
+{
+  { ".true.", 1 },
+  { ".TRUE.", 1 },
+  { ".false.", 0 },
+  { ".FALSE.", 0 },
+  { NULL, 0 }
+};
+
+static const struct token f77_keywords[] = 
+{
+  { "complex_16", COMPLEX_S16_KEYWORD, BINOP_END },
+  { "complex_32", COMPLEX_S32_KEYWORD, BINOP_END },
+  { "character", CHARACTER, BINOP_END },
+  { "integer_2", INT_S2_KEYWORD, BINOP_END },
+  { "logical_1", LOGICAL_S1_KEYWORD, BINOP_END },
+  { "logical_2", LOGICAL_S2_KEYWORD, BINOP_END },
+  { "complex_8", COMPLEX_S8_KEYWORD, BINOP_END },
+  { "integer", INT_KEYWORD, BINOP_END },
+  { "logical", LOGICAL_KEYWORD, BINOP_END },
+  { "real_16", REAL_S16_KEYWORD, BINOP_END },
+  { "complex", COMPLEX_S8_KEYWORD, BINOP_END },
+  { "sizeof", SIZEOF, BINOP_END },
+  { "real_8", REAL_S8_KEYWORD, BINOP_END },
+  { "real", REAL_KEYWORD, BINOP_END },
+  { NULL, 0, 0 }
+}; 
+
+/* Implementation of a dynamically expandable buffer for processing input
+   characters acquired through lexptr and building a value to return in
+   yylval. Ripped off from ch-exp.y */ 
+
+static char *tempbuf;		/* Current buffer contents */
+static int tempbufsize;		/* Size of allocated buffer */
+static int tempbufindex;	/* Current index into buffer */
+
+#define GROWBY_MIN_SIZE 64	/* Minimum amount to grow buffer by */
+
+#define CHECKBUF(size) \
+  do { \
+    if (tempbufindex + (size) >= tempbufsize) \
+      { \
+	growbuf_by_size (size); \
+      } \
+  } while (0);
+
+
+/* Grow the static temp buffer if necessary, including allocating the first one
+   on demand. */
+
+static void
+growbuf_by_size (count)
+     int count;
+{
+  int growby;
+
+  growby = max (count, GROWBY_MIN_SIZE);
+  tempbufsize += growby;
+  if (tempbuf == NULL)
+    tempbuf = (char *) malloc (tempbufsize);
+  else
+    tempbuf = (char *) realloc (tempbuf, tempbufsize);
+}
+
+/* Blatantly ripped off from ch-exp.y. This routine recognizes F77 
+   string-literals. 
+   
+   Recognize a string literal.  A string literal is a nonzero sequence
+   of characters enclosed in matching single quotes, except that
+   a single character inside single quotes is a character literal, which
+   we reject as a string literal.  To embed the terminator character inside
+   a string, it is simply doubled (I.E. 'this''is''one''string') */
+
+static int
+match_string_literal ()
+{
+  char *tokptr = lexptr;
+
+  for (tempbufindex = 0, tokptr++; *tokptr != '\0'; tokptr++)
+    {
+      CHECKBUF (1);
+      if (*tokptr == *lexptr)
+	{
+	  if (*(tokptr + 1) == *lexptr)
+	    tokptr++;
+	  else
+	    break;
+	}
+      tempbuf[tempbufindex++] = *tokptr;
+    }
+  if (*tokptr == '\0'					/* no terminator */
+      || tempbufindex == 0)				/* no string */
+    return 0;
+  else
+    {
+      tempbuf[tempbufindex] = '\0';
+      yylval.sval.ptr = tempbuf;
+      yylval.sval.length = tempbufindex;
+      lexptr = ++tokptr;
+      return STRING_LITERAL;
+    }
+}
+
+/* Read one token, getting characters through lexptr.  */
+
+static int
+yylex ()
+{
+  int c;
+  int namelen;
+  unsigned int i,token;
+  char *tokstart;
+  
+ retry:
+  
+  tokstart = lexptr;
+  
+  /* First of all, let us make sure we are not dealing with the 
+     special tokens .true. and .false. which evaluate to 1 and 0.  */
+  
+  if (*lexptr == '.')
+    { 
+      for (i = 0; boolean_values[i].name != NULL; i++)
+	{
+	  if STREQN (tokstart, boolean_values[i].name,
+		    strlen (boolean_values[i].name))
+	    {
+	      lexptr += strlen (boolean_values[i].name); 
+	      yylval.lval = boolean_values[i].value; 
+	      return BOOLEAN_LITERAL;
+	    }
+	}
+    }
+  
+  /* See if it is a special .foo. operator */
+  
+  for (i = 0; dot_ops[i].operator != NULL; i++)
+    if (STREQN (tokstart, dot_ops[i].operator, strlen (dot_ops[i].operator)))
+      {
+	lexptr += strlen (dot_ops[i].operator);
+	yylval.opcode = dot_ops[i].opcode;
+	return dot_ops[i].token;
+      }
+  
+  switch (c = *tokstart)
+    {
+    case 0:
+      return 0;
+      
+    case ' ':
+    case '\t':
+    case '\n':
+      lexptr++;
+      goto retry;
+      
+    case '\'':
+      token = match_string_literal ();
+      if (token != 0)
+	return (token);
+      break;
+      
+    case '(':
+      paren_depth++;
+      lexptr++;
+      return c;
+      
+    case ')':
+      if (paren_depth == 0)
+	return 0;
+      paren_depth--;
+      lexptr++;
+      return c;
+      
+    case ',':
+      if (comma_terminates && paren_depth == 0)
+	return 0;
+      lexptr++;
+      return c;
+      
+    case '.':
+      /* Might be a floating point number.  */
+      if (lexptr[1] < '0' || lexptr[1] > '9')
+	goto symbol;		/* Nope, must be a symbol. */
+      /* FALL THRU into number case.  */
+      
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
+      {
+        /* It's a number.  */
+	int got_dot = 0, got_e = 0, got_d = 0, toktype;
+	register char *p = tokstart;
+	int hex = input_radix > 10;
+	
+	if (c == '0' && (p[1] == 'x' || p[1] == 'X'))
+	  {
+	    p += 2;
+	    hex = 1;
+	  }
+	else if (c == '0' && (p[1]=='t' || p[1]=='T' || p[1]=='d' || p[1]=='D'))
+	  {
+	    p += 2;
+	    hex = 0;
+	  }
+	
+	for (;; ++p)
+	  {
+	    if (!hex && !got_e && (*p == 'e' || *p == 'E'))
+	      got_dot = got_e = 1;
+	    else if (!hex && !got_d && (*p == 'd' || *p == 'D'))
+	      got_dot = got_d = 1;
+	    else if (!hex && !got_dot && *p == '.')
+	      got_dot = 1;
+	    else if (((got_e && (p[-1] == 'e' || p[-1] == 'E'))
+		     || (got_d && (p[-1] == 'd' || p[-1] == 'D')))
+		     && (*p == '-' || *p == '+'))
+	      /* This is the sign of the exponent, not the end of the
+		 number.  */
+	      continue;
+	    /* We will take any letters or digits.  parse_number will
+	       complain if past the radix, or if L or U are not final.  */
+	    else if ((*p < '0' || *p > '9')
+		     && ((*p < 'a' || *p > 'z')
+			 && (*p < 'A' || *p > 'Z')))
+	      break;
+	  }
+	toktype = parse_number (tokstart, p - tokstart, got_dot|got_e|got_d,
+				&yylval);
+        if (toktype == ERROR)
+          {
+	    char *err_copy = (char *) alloca (p - tokstart + 1);
+	    
+	    memcpy (err_copy, tokstart, p - tokstart);
+	    err_copy[p - tokstart] = 0;
+	    error ("Invalid number \"%s\".", err_copy);
+	  }
+	lexptr = p;
+	return toktype;
+      }
+      
+    case '+':
+    case '-':
+    case '*':
+    case '/':
+    case '%':
+    case '|':
+    case '&':
+    case '^':
+    case '~':
+    case '!':
+    case '@':
+    case '<':
+    case '>':
+    case '[':
+    case ']':
+    case '?':
+    case ':':
+    case '=':
+    case '{':
+    case '}':
+    symbol:
+      lexptr++;
+      return c;
+    }
+  
+  if (!(c == '_' || c == '$'
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
+    /* We must have come across a bad character (e.g. ';').  */
+    error ("Invalid character '%c' in expression.", c);
+  
+  namelen = 0;
+  for (c = tokstart[namelen];
+       (c == '_' || c == '$' || (c >= '0' && c <= '9') 
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')); 
+       c = tokstart[++namelen]);
+  
+  /* The token "if" terminates the expression and is NOT 
+     removed from the input stream.  */
+  
+  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
+    return 0;
+  
+  lexptr += namelen;
+  
+  /* Catch specific keywords.  */
+  
+  for (i = 0; f77_keywords[i].operator != NULL; i++)
+    if (STREQN(tokstart, f77_keywords[i].operator,
+               strlen(f77_keywords[i].operator)))
+      {
+	/* 	lexptr += strlen(f77_keywords[i].operator); */ 
+	yylval.opcode = f77_keywords[i].opcode;
+	return f77_keywords[i].token;
+      }
+  
+  yylval.sval.ptr = tokstart;
+  yylval.sval.length = namelen;
+  
+  if (*tokstart == '$')
+    {
+      write_dollar_variable (yylval.sval);
+      return VARIABLE;
+    }
+  
+  /* Use token-type TYPENAME for symbols that happen to be defined
+     currently as names of types; NAME for other symbols.
+     The caller is not constrained to care about the distinction.  */
+  {
+    char *tmp = copy_name (yylval.sval);
+    struct symbol *sym;
+    int is_a_field_of_this = 0;
+    int hextype;
+    
+    sym = lookup_symbol (tmp, expression_context_block,
+			 VAR_NAMESPACE,
+			 current_language->la_language == language_cplus
+			 ? &is_a_field_of_this : NULL,
+			 NULL);
+    if (sym && SYMBOL_CLASS (sym) == LOC_TYPEDEF)
+      {
+	yylval.tsym.type = SYMBOL_TYPE (sym);
+	return TYPENAME;
+      }
+    if ((yylval.tsym.type = lookup_primitive_typename (tmp)) != 0)
+      return TYPENAME;
+    
+    /* Input names that aren't symbols but ARE valid hex numbers,
+       when the input radix permits them, can be names or numbers
+       depending on the parse.  Note we support radixes > 16 here.  */
+    if (!sym
+	&& ((tokstart[0] >= 'a' && tokstart[0] < 'a' + input_radix - 10)
+	    || (tokstart[0] >= 'A' && tokstart[0] < 'A' + input_radix - 10)))
+      {
+ 	YYSTYPE newlval;	/* Its value is ignored.  */
+	hextype = parse_number (tokstart, namelen, 0, &newlval);
+	if (hextype == INT)
+	  {
+	    yylval.ssym.sym = sym;
+	    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
+	    return NAME_OR_INT;
+	  }
+      }
+    
+    /* Any other kind of symbol */
+    yylval.ssym.sym = sym;
+    yylval.ssym.is_a_field_of_this = is_a_field_of_this;
+    return NAME;
+  }
+}
+
+void
+yyerror (msg)
+     char *msg;
+{
+  error ("A %s in expression, near `%s'.", (msg ? msg : "error"), lexptr);
+}
diff --git a/gdb/f-lang.c b/gdb/f-lang.c
new file mode 100644
index 0000000..4ee66d5
--- /dev/null
+++ b/gdb/f-lang.c
@@ -0,0 +1,973 @@
+/* Fortran language support routines for GDB, the GNU debugger.
+   Copyright 1993, 1994, 1996 Free Software Foundation, Inc.
+   Contributed by Motorola.  Adapted from the C parser by Farooq Butt
+   (fmbutt@engage.sps.mot.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "f-lang.h"
+
+/* The built-in types of F77.  FIXME: integer*4 is missing, plain
+   logical is missing (builtin_type_logical is logical*4).  */
+
+struct type *builtin_type_f_character;
+struct type *builtin_type_f_logical;
+struct type *builtin_type_f_logical_s1;
+struct type *builtin_type_f_logical_s2;
+struct type *builtin_type_f_integer; 
+struct type *builtin_type_f_integer_s2;
+struct type *builtin_type_f_real;
+struct type *builtin_type_f_real_s8;
+struct type *builtin_type_f_real_s16;
+struct type *builtin_type_f_complex_s8;
+struct type *builtin_type_f_complex_s16;
+struct type *builtin_type_f_complex_s32;
+struct type *builtin_type_f_void;
+
+/* Following is dubious stuff that had been in the xcoff reader. */
+
+struct saved_fcn
+{
+  long                         line_offset;  /* Line offset for function */ 
+  struct saved_fcn             *next;      
+}; 
+
+
+struct saved_bf_symnum 
+{
+  long       symnum_fcn;  /* Symnum of function (i.e. .function directive) */
+  long       symnum_bf;   /* Symnum of .bf for this function */ 
+  struct saved_bf_symnum *next;  
+}; 
+
+typedef struct saved_fcn           SAVED_FUNCTION, *SAVED_FUNCTION_PTR; 
+typedef struct saved_bf_symnum     SAVED_BF, *SAVED_BF_PTR; 
+
+/* Local functions */
+
+#if 0
+static void clear_function_list PARAMS ((void));
+static long get_bf_for_fcn PARAMS ((long));
+static void clear_bf_list PARAMS ((void));
+static void patch_all_commons_by_name PARAMS ((char *, CORE_ADDR, int));
+static SAVED_F77_COMMON_PTR find_first_common_named PARAMS ((char *));
+static void add_common_entry PARAMS ((struct symbol *));
+static void add_common_block PARAMS ((char *, CORE_ADDR, int, char *));
+static SAVED_FUNCTION *allocate_saved_function_node PARAMS ((void));
+static SAVED_BF_PTR allocate_saved_bf_node PARAMS ((void));
+static COMMON_ENTRY_PTR allocate_common_entry_node PARAMS ((void));
+static SAVED_F77_COMMON_PTR allocate_saved_f77_common_node PARAMS ((void));
+static void patch_common_entries PARAMS ((SAVED_F77_COMMON_PTR, CORE_ADDR, int));
+#endif
+
+static struct type *f_create_fundamental_type PARAMS ((struct objfile *, int));
+static void f_printstr PARAMS ((GDB_FILE *stream, char *string, unsigned int length, int width, int force_ellipses));
+static void f_printchar PARAMS ((int c, GDB_FILE *stream));
+static void f_emit_char PARAMS ((int c, GDB_FILE *stream, int quoter));
+
+/* Print the character C on STREAM as part of the contents of a literal
+   string whose delimiter is QUOTER.  Note that that format for printing
+   characters and strings is language specific.
+   FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true F77 version.  */
+
+static void
+f_emit_char (c, stream, quoter)
+     register int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+  c &= 0xFF;			/* Avoid sign bit follies */
+  
+  if (PRINT_LITERAL_FORM (c))
+    {
+      if (c == '\\' || c == quoter)
+	fputs_filtered ("\\", stream);
+      fprintf_filtered (stream, "%c", c);
+    }
+  else
+    {
+      switch (c)
+	{
+	case '\n':
+	  fputs_filtered ("\\n", stream);
+	  break;
+	case '\b':
+	  fputs_filtered ("\\b", stream);
+	  break;
+	case '\t':
+	  fputs_filtered ("\\t", stream);
+	  break;
+	case '\f':
+	  fputs_filtered ("\\f", stream);
+	  break;
+	case '\r':
+	  fputs_filtered ("\\r", stream);
+	  break;
+	case '\033':
+	  fputs_filtered ("\\e", stream);
+	  break;
+	case '\007':
+	  fputs_filtered ("\\a", stream);
+	  break;
+	default:
+	  fprintf_filtered (stream, "\\%.3o", (unsigned int) c);
+	  break;
+	}
+    }
+}
+
+/* FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true F77version. */
+
+static void
+f_printchar (c, stream)
+     int c;
+     GDB_FILE *stream;
+{
+  fputs_filtered ("'", stream);
+  LA_EMIT_CHAR (c, stream, '\'');
+  fputs_filtered ("'", stream);
+}
+
+/* Print the character string STRING, printing at most LENGTH characters.
+   Printing stops early if the number hits print_max; repeat counts
+   are printed as appropriate.  Print ellipses at the end if we
+   had to stop before printing LENGTH characters, or if FORCE_ELLIPSES.
+   FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true F77 version. */
+
+static void
+f_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  register unsigned int i;
+  unsigned int things_printed = 0;
+  int in_quotes = 0;
+  int need_comma = 0;
+  extern int inspect_it;
+  extern int repeat_count_threshold;
+  extern int print_max;
+  
+  if (length == 0)
+    {
+      fputs_filtered ("''", gdb_stdout);
+      return;
+    }
+  
+  for (i = 0; i < length && things_printed < print_max; ++i)
+    {
+      /* Position of the character we are examining
+	 to see whether it is repeated.  */
+      unsigned int rep1;
+      /* Number of repetitions we have detected so far.  */
+      unsigned int reps;
+      
+      QUIT;
+      
+      if (need_comma)
+	{
+	  fputs_filtered (", ", stream);
+	  need_comma = 0;
+	}
+      
+      rep1 = i + 1;
+      reps = 1;
+      while (rep1 < length && string[rep1] == string[i])
+	{
+	  ++rep1;
+	  ++reps;
+	}
+      
+      if (reps > repeat_count_threshold)
+	{
+	  if (in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\', ", stream);
+	      else
+		fputs_filtered ("', ", stream);
+	      in_quotes = 0;
+	    }
+	  f_printchar (string[i], stream);
+	  fprintf_filtered (stream, " <repeats %u times>", reps);
+	  i = rep1 - 1;
+	  things_printed += repeat_count_threshold;
+	  need_comma = 1;
+	}
+      else
+	{
+	  if (!in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\'", stream);
+	      else
+		fputs_filtered ("'", stream);
+	      in_quotes = 1;
+	    }
+	  LA_EMIT_CHAR (string[i], stream, '"');
+	  ++things_printed;
+	}
+    }
+  
+  /* Terminate the quotes if necessary.  */
+  if (in_quotes)
+    {
+      if (inspect_it)
+	fputs_filtered ("\\'", stream);
+      else
+	fputs_filtered ("'", stream);
+    }
+  
+  if (force_ellipses || i < length)
+    fputs_filtered ("...", stream);
+}
+
+/* FIXME:  This is a copy of c_create_fundamental_type(), before
+   all the non-C types were stripped from it.  Needs to be fixed
+   by an experienced F77 programmer. */
+
+static struct type *
+f_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  register struct type *type = NULL;
+  
+  switch (typeid)
+    {
+    case FT_VOID:
+      type = init_type (TYPE_CODE_VOID,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			0, "VOID", objfile);
+      break;
+    case FT_BOOLEAN:
+      type = init_type (TYPE_CODE_BOOL,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "boolean", objfile);
+      break;
+    case FT_STRING:
+      type = init_type (TYPE_CODE_STRING,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			0, "string", objfile);
+      break;
+    case FT_CHAR:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			0, "character", objfile);
+      break;
+    case FT_SIGNED_CHAR:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			0, "integer*1", objfile);
+      break;
+    case FT_UNSIGNED_CHAR:
+      type = init_type (TYPE_CODE_BOOL,
+			TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "logical*1", objfile);
+      break;
+    case FT_SHORT:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			0, "integer*2", objfile);
+      break;
+    case FT_SIGNED_SHORT:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			0, "short", objfile);	/* FIXME-fnf */
+      break;
+    case FT_UNSIGNED_SHORT:
+      type = init_type (TYPE_CODE_BOOL,
+			TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "logical*2", objfile);
+      break;
+    case FT_INTEGER:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_INT_BIT / TARGET_CHAR_BIT,
+			0, "integer*4", objfile);
+      break;
+    case FT_SIGNED_INTEGER:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_INT_BIT / TARGET_CHAR_BIT,
+			0, "integer", objfile); /* FIXME -fnf */
+      break;
+    case FT_UNSIGNED_INTEGER:
+      type = init_type (TYPE_CODE_BOOL, 
+			TARGET_INT_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "logical*4", objfile);
+      break;
+    case FT_FIXED_DECIMAL:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_INT_BIT / TARGET_CHAR_BIT,
+			0, "fixed decimal", objfile);
+      break;
+    case FT_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			0, "long", objfile);
+      break;
+    case FT_SIGNED_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			0, "long", objfile); /* FIXME -fnf */
+      break;
+    case FT_UNSIGNED_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "unsigned long", objfile);
+      break;
+    case FT_LONG_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			0, "long long", objfile);
+      break;
+    case FT_SIGNED_LONG_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			0, "signed long long", objfile);
+      break;
+    case FT_UNSIGNED_LONG_LONG:
+      type = init_type (TYPE_CODE_INT,
+			TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, "unsigned long long", objfile);
+      break;
+    case FT_FLOAT:
+      type = init_type (TYPE_CODE_FLT,
+			TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+			0, "real", objfile);
+      break;
+    case FT_DBL_PREC_FLOAT:
+      type = init_type (TYPE_CODE_FLT,
+			TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			0, "real*8", objfile);
+      break;
+    case FT_FLOAT_DECIMAL:
+      type = init_type (TYPE_CODE_FLT,
+			TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			0, "floating decimal", objfile);
+      break;
+    case FT_EXT_PREC_FLOAT:
+      type = init_type (TYPE_CODE_FLT,
+			TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+			0, "real*16", objfile);
+      break;
+    case FT_COMPLEX:
+      type = init_type (TYPE_CODE_COMPLEX,
+			2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+			0, "complex*8", objfile);
+      TYPE_TARGET_TYPE (type) = builtin_type_f_real;
+      break;
+    case FT_DBL_PREC_COMPLEX:
+      type = init_type (TYPE_CODE_COMPLEX,
+			2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			0, "complex*16", objfile);
+      TYPE_TARGET_TYPE (type) = builtin_type_f_real_s8;
+      break;
+    case FT_EXT_PREC_COMPLEX:
+      type = init_type (TYPE_CODE_COMPLEX,
+			2 * TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+			0, "complex*32", objfile);
+      TYPE_TARGET_TYPE (type) = builtin_type_f_real_s16;
+      break;
+    default:
+      /* FIXME:  For now, if we are asked to produce a type not in this
+	 language, create the equivalent of a C integer type with the
+	 name "<?type?>".  When all the dust settles from the type
+	 reconstruction work, this should probably become an error. */
+      type = init_type (TYPE_CODE_INT,
+			TARGET_INT_BIT / TARGET_CHAR_BIT,
+			0, "<?type?>", objfile);
+      warning ("internal error: no F77 fundamental type %d", typeid);
+      break;
+    }
+  return (type);
+}
+
+
+/* Table of operators and their precedences for printing expressions.  */
+
+static const struct op_print f_op_print_tab[] = {
+  { "+",     BINOP_ADD, PREC_ADD, 0 },
+  { "+",     UNOP_PLUS, PREC_PREFIX, 0 },
+  { "-",     BINOP_SUB, PREC_ADD, 0 },
+  { "-",     UNOP_NEG, PREC_PREFIX, 0 },
+  { "*",     BINOP_MUL, PREC_MUL, 0 },
+  { "/",     BINOP_DIV, PREC_MUL, 0 },
+  { "DIV",   BINOP_INTDIV, PREC_MUL, 0 },
+  { "MOD",   BINOP_REM, PREC_MUL, 0 },
+  { "=",     BINOP_ASSIGN, PREC_ASSIGN, 1 },
+  { ".OR.",  BINOP_LOGICAL_OR, PREC_LOGICAL_OR, 0 },
+  { ".AND.", BINOP_LOGICAL_AND, PREC_LOGICAL_AND, 0 },
+  { ".NOT.", UNOP_LOGICAL_NOT, PREC_PREFIX, 0 },
+  { ".EQ.",  BINOP_EQUAL, PREC_EQUAL, 0 },
+  { ".NE.",  BINOP_NOTEQUAL, PREC_EQUAL, 0 },
+  { ".LE.",  BINOP_LEQ, PREC_ORDER, 0 },
+  { ".GE.",  BINOP_GEQ, PREC_ORDER, 0 },
+  { ".GT.",  BINOP_GTR, PREC_ORDER, 0 },
+  { ".LT.",  BINOP_LESS, PREC_ORDER, 0 },
+  { "**",    UNOP_IND, PREC_PREFIX, 0 },
+  { "@",     BINOP_REPEAT, PREC_REPEAT, 0 },
+  { NULL,    0, 0, 0 }
+};
+
+struct type ** CONST_PTR (f_builtin_types[]) = 
+{
+  &builtin_type_f_character,
+  &builtin_type_f_logical,
+  &builtin_type_f_logical_s1,
+  &builtin_type_f_logical_s2,
+  &builtin_type_f_integer,
+  &builtin_type_f_integer_s2,
+  &builtin_type_f_real,
+  &builtin_type_f_real_s8,
+  &builtin_type_f_real_s16,
+  &builtin_type_f_complex_s8,
+  &builtin_type_f_complex_s16,
+#if 0
+  &builtin_type_f_complex_s32,
+#endif
+  &builtin_type_f_void,
+  0
+};
+
+/* This is declared in c-lang.h but it is silly to import that file for what
+   is already just a hack. */
+extern int
+c_value_print PARAMS ((struct value *, GDB_FILE *, int, enum val_prettyprint));
+
+const struct language_defn f_language_defn = {
+  "fortran",
+  language_fortran,
+  f_builtin_types,
+  range_check_on,
+  type_check_on,
+  f_parse,			/* parser */
+  f_error,			/* parser error function */
+  evaluate_subexp_standard,
+  f_printchar,			/* Print character constant */
+  f_printstr,			/* function to print string constant */
+  f_emit_char,			/* Function to print a single character */
+  f_create_fundamental_type,	/* Create fundamental type in this language */
+  f_print_type,		        /* Print a type using appropriate syntax */
+  f_val_print,			/* Print a value using appropriate syntax */
+  c_value_print,  /* FIXME */
+  {"",      "",   "",   ""},	/* Binary format info */
+  {"0%o",  "0",   "o", ""},	/* Octal format info */
+  {"%d",   "",    "d", ""},	/* Decimal format info */
+  {"0x%x", "0x",  "x", ""},	/* Hex format info */
+  f_op_print_tab,		/* expression operators for printing */
+  0,				/* arrays are first-class (not c-style) */
+  1,				/* String lower bound */
+  &builtin_type_f_character,	/* Type of string elements */ 
+  LANG_MAGIC
+  };
+
+void
+_initialize_f_language ()
+{
+  builtin_type_f_void =
+    init_type (TYPE_CODE_VOID, 1,
+	       0,
+	       "VOID", (struct objfile *) NULL);
+  
+  builtin_type_f_character =
+    init_type (TYPE_CODE_INT, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "character", (struct objfile *) NULL);
+  
+  builtin_type_f_logical_s1 =
+    init_type (TYPE_CODE_BOOL, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "logical*1", (struct objfile *) NULL);
+  
+  builtin_type_f_integer_s2 =
+    init_type (TYPE_CODE_INT, TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "integer*2", (struct objfile *) NULL);
+  
+  builtin_type_f_logical_s2 =
+    init_type (TYPE_CODE_BOOL, TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "logical*2", (struct objfile *) NULL);
+  
+  builtin_type_f_integer =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "integer", (struct objfile *) NULL);
+  
+  builtin_type_f_logical =
+    init_type (TYPE_CODE_BOOL, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "logical*4", (struct objfile *) NULL);
+  
+  builtin_type_f_real =
+    init_type (TYPE_CODE_FLT, TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "real", (struct objfile *) NULL);
+  
+  builtin_type_f_real_s8 =
+    init_type (TYPE_CODE_FLT, TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "real*8", (struct objfile *) NULL);
+  
+  builtin_type_f_real_s16 =
+    init_type (TYPE_CODE_FLT, TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "real*16", (struct objfile *) NULL);
+  
+  builtin_type_f_complex_s8 =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "complex*8", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (builtin_type_f_complex_s8) = builtin_type_f_real;
+  
+  builtin_type_f_complex_s16 =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "complex*16", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (builtin_type_f_complex_s16) = builtin_type_f_real_s8;
+  
+  /* We have a new size == 4 double floats for the
+     complex*32 data type */
+  
+  builtin_type_f_complex_s32 = 
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "complex*32", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (builtin_type_f_complex_s32) = builtin_type_f_real_s16;
+
+  builtin_type_string =
+    init_type (TYPE_CODE_STRING, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "character string", (struct objfile *) NULL); 
+  
+  add_language (&f_language_defn);
+}
+
+#if 0
+static SAVED_BF_PTR
+allocate_saved_bf_node()
+{
+  SAVED_BF_PTR new;
+  
+  new = (SAVED_BF_PTR) xmalloc (sizeof (SAVED_BF));
+  return(new);
+}
+
+static SAVED_FUNCTION *
+allocate_saved_function_node()
+{
+  SAVED_FUNCTION *new;
+  
+  new = (SAVED_FUNCTION *) xmalloc (sizeof (SAVED_FUNCTION));
+  return(new);
+}
+
+static SAVED_F77_COMMON_PTR allocate_saved_f77_common_node()
+{
+  SAVED_F77_COMMON_PTR new;
+  
+  new = (SAVED_F77_COMMON_PTR) xmalloc (sizeof (SAVED_F77_COMMON));
+  return(new);
+}
+
+static COMMON_ENTRY_PTR allocate_common_entry_node()
+{
+  COMMON_ENTRY_PTR new;
+  
+  new = (COMMON_ENTRY_PTR) xmalloc (sizeof (COMMON_ENTRY));
+  return(new);
+}
+#endif
+
+SAVED_F77_COMMON_PTR head_common_list=NULL;     /* Ptr to 1st saved COMMON  */
+SAVED_F77_COMMON_PTR tail_common_list=NULL;     /* Ptr to last saved COMMON  */
+SAVED_F77_COMMON_PTR current_common=NULL;       /* Ptr to current COMMON */
+
+#if 0
+static SAVED_BF_PTR saved_bf_list=NULL;          /* Ptr to (.bf,function) 
+                                                    list*/
+static SAVED_BF_PTR saved_bf_list_end=NULL;      /* Ptr to above list's end */
+static SAVED_BF_PTR current_head_bf_list=NULL;   /* Current head of above list
+						  */
+
+static SAVED_BF_PTR tmp_bf_ptr;                  /* Generic temporary for use 
+                                                    in macros */ 
+
+/* The following function simply enters a given common block onto 
+   the global common block chain */
+
+static void
+add_common_block(name,offset,secnum,func_stab)
+     char *name;
+     CORE_ADDR offset;
+     int secnum;
+     char *func_stab;
+{
+  SAVED_F77_COMMON_PTR tmp;
+  char *c,*local_copy_func_stab; 
+  
+  /* If the COMMON block we are trying to add has a blank 
+     name (i.e. "#BLNK_COM") then we set it to __BLANK
+     because the darn "#" character makes GDB's input 
+     parser have fits. */ 
+  
+  
+  if (STREQ(name,BLANK_COMMON_NAME_ORIGINAL) ||
+      STREQ(name,BLANK_COMMON_NAME_MF77))
+    {
+      
+      free(name);
+      name = alloca(strlen(BLANK_COMMON_NAME_LOCAL) + 1); 
+      strcpy(name,BLANK_COMMON_NAME_LOCAL); 
+    }
+  
+  tmp = allocate_saved_f77_common_node();
+  
+  local_copy_func_stab = xmalloc (strlen(func_stab) + 1);
+  strcpy(local_copy_func_stab,func_stab); 
+  
+  tmp->name = xmalloc(strlen(name) + 1);
+  
+  /* local_copy_func_stab is a stabstring, let us first extract the 
+     function name from the stab by NULLing out the ':' character. */ 
+  
+  
+  c = NULL; 
+  c = strchr(local_copy_func_stab,':');
+  
+  if (c)
+    *c = '\0';
+  else
+    error("Malformed function STAB found in add_common_block()");
+  
+  
+  tmp->owning_function = xmalloc (strlen(local_copy_func_stab) + 1); 
+  
+  strcpy(tmp->owning_function,local_copy_func_stab); 
+  
+  strcpy(tmp->name,name);
+  tmp->offset = offset; 
+  tmp->next = NULL;
+  tmp->entries = NULL;
+  tmp->secnum = secnum; 
+  
+  current_common = tmp;
+  
+  if (head_common_list == NULL)
+    {
+      head_common_list = tail_common_list = tmp;
+    }
+  else
+    {
+      tail_common_list->next = tmp; 
+      tail_common_list = tmp;
+    }
+}
+#endif
+
+/* The following function simply enters a given common entry onto 
+   the "current_common" block that has been saved away. */ 
+
+#if 0
+static void
+add_common_entry(entry_sym_ptr)
+     struct symbol *entry_sym_ptr; 
+{
+  COMMON_ENTRY_PTR tmp;
+  
+  
+  
+  /* The order of this list is important, since 
+     we expect the entries to appear in decl.
+     order when we later issue "info common" calls */ 
+  
+  tmp = allocate_common_entry_node();
+  
+  tmp->next = NULL;
+  tmp->symbol = entry_sym_ptr;
+  
+  if (current_common == NULL)
+    error("Attempt to add COMMON entry with no block open!");
+  else         
+    {
+      if (current_common->entries == NULL)
+	{
+	  current_common->entries = tmp;
+	  current_common->end_of_entries = tmp; 
+	}
+      else
+	{
+	  current_common->end_of_entries->next = tmp; 
+	  current_common->end_of_entries = tmp; 
+	}
+    }
+}
+#endif
+
+/* This routine finds the first encountred COMMON block named "name" */ 
+
+#if 0
+static SAVED_F77_COMMON_PTR
+find_first_common_named(name)
+     char *name; 
+{
+  
+  SAVED_F77_COMMON_PTR tmp;
+  
+  tmp = head_common_list;
+  
+  while (tmp != NULL)
+    {
+      if (STREQ(tmp->name,name))
+	return(tmp);
+      else
+	tmp = tmp->next;
+    }
+  return(NULL); 
+}
+#endif
+
+/* This routine finds the first encountred COMMON block named "name" 
+   that belongs to function funcname */ 
+
+SAVED_F77_COMMON_PTR find_common_for_function(name, funcname)
+     char *name;
+     char *funcname; 
+{
+  
+  SAVED_F77_COMMON_PTR tmp;
+  
+  tmp = head_common_list;
+  
+  while (tmp != NULL)
+    {
+      if (STREQ(tmp->name,name) && STREQ(tmp->owning_function,funcname))
+	return(tmp);
+      else
+	tmp = tmp->next;
+    }
+  return(NULL); 
+}
+
+
+#if 0
+
+/* The following function is called to patch up the offsets 
+   for the statics contained in the COMMON block named
+   "name."  */ 
+
+static void
+patch_common_entries (blk, offset, secnum)
+     SAVED_F77_COMMON_PTR blk;
+     CORE_ADDR offset;
+     int secnum;
+{
+  COMMON_ENTRY_PTR entry;
+  
+  blk->offset = offset;  /* Keep this around for future use. */ 
+  
+  entry = blk->entries;
+  
+  while (entry != NULL)
+    {
+      SYMBOL_VALUE (entry->symbol) += offset; 
+      SYMBOL_SECTION (entry->symbol) = secnum;
+      
+      entry = entry->next;
+    }
+  blk->secnum = secnum; 
+}
+
+/* Patch all commons named "name" that need patching.Since COMMON
+   blocks occur with relative infrequency, we simply do a linear scan on
+   the name.  Eventually, the best way to do this will be a
+   hashed-lookup.  Secnum is the section number for the .bss section
+   (which is where common data lives). */
+
+static void
+patch_all_commons_by_name (name, offset, secnum)
+     char *name;
+     CORE_ADDR offset;
+     int secnum;
+{
+  
+  SAVED_F77_COMMON_PTR tmp;
+  
+  /* For blank common blocks, change the canonical reprsentation 
+     of a blank name */
+  
+  if ((STREQ(name,BLANK_COMMON_NAME_ORIGINAL)) ||
+      (STREQ(name,BLANK_COMMON_NAME_MF77)))
+    {
+      free(name);
+      name = alloca(strlen(BLANK_COMMON_NAME_LOCAL) + 1); 
+      strcpy(name,BLANK_COMMON_NAME_LOCAL); 
+    }
+  
+  tmp = head_common_list;
+  
+  while (tmp != NULL)
+    {
+      if (COMMON_NEEDS_PATCHING(tmp))
+	if (STREQ(tmp->name,name))
+	  patch_common_entries(tmp,offset,secnum); 
+      
+      tmp = tmp->next;
+    }   
+}
+#endif
+
+/* This macro adds the symbol-number for the start of the function 
+   (the symbol number of the .bf) referenced by symnum_fcn to a 
+   list.  This list, in reality should be a FIFO queue but since 
+   #line pragmas sometimes cause line ranges to get messed up 
+   we simply create a linear list.  This list can then be searched 
+   first by a queueing algorithm and upon failure fall back to 
+   a linear scan. */ 
+
+#if 0
+#define ADD_BF_SYMNUM(bf_sym,fcn_sym) \
+  \
+  if (saved_bf_list == NULL) \
+{ \
+    tmp_bf_ptr = allocate_saved_bf_node(); \
+      \
+	tmp_bf_ptr->symnum_bf = (bf_sym); \
+	  tmp_bf_ptr->symnum_fcn = (fcn_sym);  \
+	    tmp_bf_ptr->next = NULL; \
+	      \
+		current_head_bf_list = saved_bf_list = tmp_bf_ptr; \
+		  saved_bf_list_end = tmp_bf_ptr; \
+		  } \
+else \
+{  \
+     tmp_bf_ptr = allocate_saved_bf_node(); \
+       \
+         tmp_bf_ptr->symnum_bf = (bf_sym);  \
+	   tmp_bf_ptr->symnum_fcn = (fcn_sym);  \
+	     tmp_bf_ptr->next = NULL;  \
+	       \
+		 saved_bf_list_end->next = tmp_bf_ptr;  \
+		   saved_bf_list_end = tmp_bf_ptr; \
+		   } 
+#endif
+
+/* This function frees the entire (.bf,function) list */ 
+
+#if 0
+static void 
+  clear_bf_list()
+{
+  
+  SAVED_BF_PTR tmp = saved_bf_list;
+  SAVED_BF_PTR next = NULL; 
+  
+  while (tmp != NULL)
+    {
+      next = tmp->next;
+      free(tmp);
+      tmp=next;
+    }
+  saved_bf_list = NULL;
+}
+#endif
+
+int global_remote_debug;
+
+#if 0
+
+static long
+get_bf_for_fcn (the_function)
+     long the_function;
+{
+  SAVED_BF_PTR tmp;
+  int nprobes = 0;
+  
+  /* First use a simple queuing algorithm (i.e. look and see if the 
+     item at the head of the queue is the one you want)  */
+  
+  if (saved_bf_list == NULL)
+    fatal ("cannot get .bf node off empty list"); 
+  
+  if (current_head_bf_list != NULL) 
+    if (current_head_bf_list->symnum_fcn == the_function)
+      {
+	if (global_remote_debug) 
+	  fprintf(stderr,"*"); 
+
+	tmp = current_head_bf_list; 
+	current_head_bf_list = current_head_bf_list->next;
+	return(tmp->symnum_bf); 
+      }
+  
+  /* If the above did not work (probably because #line directives were 
+     used in the sourcefile and they messed up our internal tables) we now do
+     the ugly linear scan */
+  
+  if (global_remote_debug) 
+    fprintf(stderr,"\ndefaulting to linear scan\n"); 
+  
+  nprobes = 0; 
+  tmp = saved_bf_list;
+  while (tmp != NULL)
+    {
+      nprobes++; 
+      if (tmp->symnum_fcn == the_function)
+	{ 
+	  if (global_remote_debug)
+	    fprintf(stderr,"Found in %d probes\n",nprobes);
+	  current_head_bf_list = tmp->next;
+	  return(tmp->symnum_bf);
+	} 
+      tmp= tmp->next; 
+    }
+  
+  return(-1); 
+}
+
+static SAVED_FUNCTION_PTR saved_function_list=NULL; 
+static SAVED_FUNCTION_PTR saved_function_list_end=NULL; 
+
+static void
+clear_function_list()
+{
+  SAVED_FUNCTION_PTR tmp = saved_function_list;
+  SAVED_FUNCTION_PTR next = NULL; 
+  
+  while (tmp != NULL)
+    {
+      next = tmp->next;
+      free(tmp);
+      tmp = next;
+    }
+  
+  saved_function_list = NULL;
+}
+#endif
+
diff --git a/gdb/f-lang.h b/gdb/f-lang.h
new file mode 100644
index 0000000..c6b8f02
--- /dev/null
+++ b/gdb/f-lang.h
@@ -0,0 +1,96 @@
+/* Fortran language support definitions for GDB, the GNU debugger.
+   Copyright 1992, 1993, 1994 Free Software Foundation, Inc.
+   Contributed by Motorola.  Adapted from the C definitions by Farooq Butt
+   (fmbutt@engage.sps.mot.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+extern int f_parse PARAMS ((void));
+
+extern void f_error PARAMS ((char *));	/* Defined in f-exp.y */
+
+extern void f_print_type PARAMS ((struct type *, char *,
+				  GDB_FILE *, int, int));
+
+extern int f_val_print PARAMS ((struct type *, char *, int, 
+				CORE_ADDR, GDB_FILE *,
+				int, int, int, enum val_prettyprint));
+
+/* Language-specific data structures */ 
+
+struct common_entry
+{
+  struct symbol *symbol;                    /* The symbol node corresponding
+					       to this component */ 
+  struct common_entry *next;                /* The next component */ 
+};
+
+struct saved_f77_common
+{
+  char *name;                                /* Name of COMMON */
+  char *owning_function;                     /* Name of parent function */ 
+  int secnum;                                /* Section # of .bss */ 
+  CORE_ADDR offset;                          /* Offset from .bss for 
+						this block */
+  struct common_entry *entries;              /* List of block's components */
+  struct common_entry *end_of_entries;       /* ptr. to end of components */ 
+  struct saved_f77_common *next;              /* Next saved COMMON block */ 
+};
+
+typedef struct saved_f77_common    SAVED_F77_COMMON, *SAVED_F77_COMMON_PTR;
+
+typedef struct common_entry        COMMON_ENTRY, *COMMON_ENTRY_PTR;
+
+extern SAVED_F77_COMMON_PTR head_common_list;   /* Ptr to 1st saved COMMON  */
+extern SAVED_F77_COMMON_PTR tail_common_list;   /* Ptr to last saved COMMON  */
+extern SAVED_F77_COMMON_PTR current_common;     /* Ptr to current COMMON */
+
+extern SAVED_F77_COMMON_PTR find_common_for_function PARAMS ((char *, char *));
+
+#define UNINITIALIZED_SECNUM -1 
+#define COMMON_NEEDS_PATCHING(blk) ((blk)->secnum == UNINITIALIZED_SECNUM)
+
+#define BLANK_COMMON_NAME_ORIGINAL "#BLNK_COM"  /* XLF assigned  */
+#define BLANK_COMMON_NAME_MF77     "__BLNK__"   /* MF77 assigned  */
+#define BLANK_COMMON_NAME_LOCAL    "__BLANK"    /* Local GDB */
+
+#define BOUND_FETCH_OK 1
+#define BOUND_FETCH_ERROR -999
+
+/* When reasonable array bounds cannot be fetched, such as when 
+you ask to 'mt print symbols' and there is no stack frame and 
+therefore no way of knowing the bounds of stack-based arrays, 
+we have to assign default bounds, these are as good as any... */ 
+
+#define DEFAULT_UPPER_BOUND 999999
+#define DEFAULT_LOWER_BOUND -999999
+
+extern char *real_main_name;   /* Name of main function */ 
+extern int  real_main_c_value;   /* C_value field of main function */ 
+
+extern int f77_get_dynamic_upperbound PARAMS ((struct type *, int *));
+
+extern int f77_get_dynamic_lowerbound PARAMS ((struct type *, int *));
+
+extern void f77_get_dynamic_array_length PARAMS ((struct type *)); 
+
+extern int calc_f77_array_dims PARAMS ((struct type *));
+
+#define DEFAULT_DOTMAIN_NAME_IN_MF77            ".MAIN_"
+#define DEFAULT_MAIN_NAME_IN_MF77               "MAIN_"
+#define DEFAULT_DOTMAIN_NAME_IN_XLF_BUGGY       ".main "
+#define DEFAULT_DOTMAIN_NAME_IN_XLF             ".main"
diff --git a/gdb/f-typeprint.c b/gdb/f-typeprint.c
new file mode 100644
index 0000000..09bb3eb
--- /dev/null
+++ b/gdb/f-typeprint.c
@@ -0,0 +1,458 @@
+/* Support for printing Fortran types for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1993, 1994 Free Software Foundation, Inc.
+   Contributed by Motorola.  Adapted from the C version by Farooq Butt
+   (fmbutt@engage.sps.mot.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bfd.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "demangle.h"
+#include "f-lang.h"
+#include "typeprint.h"
+#include "frame.h"  /* ??? */
+
+#include "gdb_string.h"
+#include <errno.h>
+
+#if 0	/* Currently unused */
+static void f_type_print_args PARAMS ((struct type *, GDB_FILE *));
+#endif
+
+static void print_equivalent_f77_float_type PARAMS ((struct type *,
+						     GDB_FILE *));
+
+static void f_type_print_varspec_suffix PARAMS ((struct type *, GDB_FILE *,
+						 int, int, int));
+
+void f_type_print_varspec_prefix PARAMS ((struct type *, GDB_FILE *,
+					  int, int));
+
+void f_type_print_base PARAMS ((struct type *, GDB_FILE *, int, int));
+
+
+/* LEVEL is the depth to indent lines by.  */
+
+void
+f_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  register enum type_code code;
+  int demangled_args;
+
+  f_type_print_base (type, stream, show, level);
+  code = TYPE_CODE (type);
+  if ((varstring != NULL && *varstring != '\0')
+      ||
+      /* Need a space if going to print stars or brackets;
+	 but not if we will print just a type name.  */
+      ((show > 0 || TYPE_NAME (type) == 0)
+       &&
+       (code == TYPE_CODE_PTR || code == TYPE_CODE_FUNC
+	|| code == TYPE_CODE_METHOD
+	|| code == TYPE_CODE_ARRAY
+	|| code == TYPE_CODE_MEMBER
+	|| code == TYPE_CODE_REF)))
+    fputs_filtered (" ", stream);
+  f_type_print_varspec_prefix (type, stream, show, 0);
+
+  fputs_filtered (varstring, stream);
+
+  /* For demangled function names, we have the arglist as part of the name,
+     so don't print an additional pair of ()'s */
+
+  demangled_args = varstring[strlen(varstring) - 1] == ')';
+  f_type_print_varspec_suffix (type, stream, show, 0, demangled_args);
+}
+
+/* Print any asterisks or open-parentheses needed before the
+   variable name (to describe its type).
+
+   On outermost call, pass 0 for PASSED_A_PTR.
+   On outermost call, SHOW > 0 means should ignore
+   any typename for TYPE and show its details.
+   SHOW is always zero on recursive calls.  */
+
+void
+f_type_print_varspec_prefix (type, stream, show, passed_a_ptr)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int passed_a_ptr;
+{
+  if (type == 0)
+    return;
+
+  if (TYPE_NAME (type) && show <= 0)
+    return;
+
+  QUIT;
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_PTR:
+      f_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 1);
+      break;
+
+    case TYPE_CODE_FUNC:
+      f_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      if (passed_a_ptr)
+	fprintf_filtered (stream, "(");
+      break;
+
+    case TYPE_CODE_ARRAY:
+      f_type_print_varspec_prefix (TYPE_TARGET_TYPE (type), stream, 0, 0);
+      break;
+
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_RANGE:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_REF:
+    case TYPE_CODE_COMPLEX:
+    case TYPE_CODE_TYPEDEF:
+      /* These types need no prefix.  They are listed here so that
+	 gcc -Wall will reveal any types that haven't been handled.  */
+      break;
+    }
+}
+
+#if 0	/* Currently unused */
+
+static void
+f_type_print_args (type, stream)
+     struct type *type;
+     GDB_FILE *stream;
+{
+  int i;
+  struct type **args;
+
+  fprintf_filtered (stream, "(");
+  args = TYPE_ARG_TYPES (type);
+  if (args != NULL)
+    {
+      if (args[1] == NULL)
+	{
+	  fprintf_filtered (stream, "...");
+	}
+      else
+	{
+	  for (i = 1; args[i] != NULL && args[i]->code != TYPE_CODE_VOID; i++)
+	    {
+	      f_print_type (args[i], "", stream, -1, 0);
+	      if (args[i+1] == NULL)
+		fprintf_filtered (stream, "...");
+	      else if (args[i+1]->code != TYPE_CODE_VOID)
+		{
+		  fprintf_filtered (stream, ",");
+		  wrap_here ("    ");
+		}
+	    }
+	}
+    }
+  fprintf_filtered (stream, ")");
+}
+
+#endif	/* 0 */
+
+/* Print any array sizes, function arguments or close parentheses
+   needed after the variable name (to describe its type).
+   Args work like c_type_print_varspec_prefix.  */
+
+static void
+f_type_print_varspec_suffix (type, stream, show, passed_a_ptr, demangled_args)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int passed_a_ptr;
+     int demangled_args;
+{
+  int upper_bound, lower_bound;
+  int lower_bound_was_default = 0;
+  static int arrayprint_recurse_level = 0;
+  int retcode;
+
+  if (type == 0)
+    return;
+
+  if (TYPE_NAME (type) && show <= 0)
+    return;
+
+  QUIT;
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_ARRAY:
+      arrayprint_recurse_level++;
+
+      if (arrayprint_recurse_level == 1)
+	fprintf_filtered(stream,"(");
+
+      if (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_ARRAY)
+	f_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 0, 0);
+
+      retcode = f77_get_dynamic_lowerbound (type,&lower_bound);
+
+      lower_bound_was_default = 0;
+
+      if (retcode == BOUND_FETCH_ERROR)
+	fprintf_filtered (stream,"???");
+      else
+	if (lower_bound == 1) /* The default */
+	  lower_bound_was_default = 1;
+	else
+	  fprintf_filtered (stream,"%d",lower_bound);
+
+      if (lower_bound_was_default)
+	lower_bound_was_default = 0;
+      else
+	fprintf_filtered(stream,":");
+
+      /* Make sure that, if we have an assumed size array, we
+	 print out a warning and print the upperbound as '*' */
+
+      if (TYPE_ARRAY_UPPER_BOUND_TYPE(type) == BOUND_CANNOT_BE_DETERMINED)
+	fprintf_filtered (stream, "*");
+       else
+	 {
+	   retcode = f77_get_dynamic_upperbound(type,&upper_bound);
+
+	   if (retcode == BOUND_FETCH_ERROR)
+	     fprintf_filtered(stream,"???");
+	   else
+	     fprintf_filtered(stream,"%d",upper_bound);
+	 }
+
+      if (TYPE_CODE (TYPE_TARGET_TYPE (type)) != TYPE_CODE_ARRAY)
+	f_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 0, 0);
+      if (arrayprint_recurse_level == 1)
+	fprintf_filtered (stream, ")");
+      else
+	fprintf_filtered(stream,",");
+      arrayprint_recurse_level--;
+      break;
+
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_REF:
+      f_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0, 1, 0);
+      fprintf_filtered(stream,")");
+      break;
+
+    case TYPE_CODE_FUNC:
+      f_type_print_varspec_suffix (TYPE_TARGET_TYPE (type), stream, 0,
+				 passed_a_ptr, 0);
+      if (passed_a_ptr)
+	fprintf_filtered (stream, ")");
+
+      fprintf_filtered (stream, "()");
+      break;
+
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_RANGE:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_COMPLEX:
+    case TYPE_CODE_TYPEDEF:
+      /* These types do not need a suffix.  They are listed so that
+	 gcc -Wall will report types that may not have been considered.  */
+      break;
+    }
+}
+
+static void
+print_equivalent_f77_float_type (type, stream)
+     struct type *type;
+     GDB_FILE *stream;
+{
+  /* Override type name "float" and make it the
+     appropriate real. XLC stupidly outputs -12 as a type
+     for real when it really should be outputting -18 */
+
+  fprintf_filtered (stream, "real*%d", TYPE_LENGTH (type));
+}
+
+/* Print the name of the type (or the ultimate pointer target,
+   function value or array element), or the description of a
+   structure or union.
+
+   SHOW nonzero means don't print this type as just its name;
+   show its real definition even if it has a name.
+   SHOW zero means print just typename or struct tag if there is one
+   SHOW negative means abbreviate structure elements.
+   SHOW is decremented for printing of structure elements.
+
+   LEVEL is the depth to indent by.
+   We increase it for some recursive calls.  */
+
+void
+f_type_print_base (type, stream, show, level)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  int retcode;
+  int upper_bound;
+
+  QUIT;
+
+  wrap_here ("    ");
+  if (type == NULL)
+    {
+      fputs_filtered ("<type unknown>", stream);
+      return;
+    }
+
+  /* When SHOW is zero or less, and there is a valid type name, then always
+     just print the type name directly from the type. */
+
+  if ((show <= 0) && (TYPE_NAME (type) != NULL))
+    {
+      if (TYPE_CODE (type) == TYPE_CODE_FLT)
+	print_equivalent_f77_float_type (type, stream);
+      else
+	fputs_filtered (TYPE_NAME (type), stream);
+      return;
+    }
+
+  if (TYPE_CODE (type) != TYPE_CODE_TYPEDEF)
+    CHECK_TYPEDEF (type);
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_TYPEDEF:
+      f_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+      break;
+
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_FUNC:
+      f_type_print_base (TYPE_TARGET_TYPE (type), stream, show, level);
+      break;
+
+   case TYPE_CODE_PTR:
+      fprintf_filtered (stream, "PTR TO -> ( ");
+      f_type_print_base (TYPE_TARGET_TYPE (type), stream, 0, level);
+      break;
+
+    case TYPE_CODE_VOID:
+      fprintf_filtered (stream, "VOID");
+      break;
+
+    case TYPE_CODE_UNDEF:
+      fprintf_filtered (stream, "struct <unknown>");
+      break;
+
+    case TYPE_CODE_ERROR:
+      fprintf_filtered (stream, "<unknown type>");
+      break;
+
+    case TYPE_CODE_RANGE:
+      /* This should not occur */
+      fprintf_filtered (stream, "<range type>");
+      break;
+
+    case TYPE_CODE_CHAR:
+      /* Override name "char" and make it "character" */
+      fprintf_filtered (stream, "character");
+      break;
+
+    case TYPE_CODE_INT:
+      /* There may be some character types that attempt to come
+         through as TYPE_CODE_INT since dbxstclass.h is so
+         C-oriented, we must change these to "character" from "char".  */
+
+      if (STREQ (TYPE_NAME (type), "char"))
+	fprintf_filtered (stream, "character");
+      else
+	goto default_case;
+      break;
+
+    case TYPE_CODE_COMPLEX:
+      fprintf_filtered (stream, "complex*%d", TYPE_LENGTH (type));
+      break;
+
+    case TYPE_CODE_FLT:
+      print_equivalent_f77_float_type (type, stream);
+      break;
+
+    case TYPE_CODE_STRING:
+      /* Strings may have dynamic upperbounds (lengths) like arrays. */
+
+      if (TYPE_ARRAY_UPPER_BOUND_TYPE (type) == BOUND_CANNOT_BE_DETERMINED)
+	fprintf_filtered (stream, "character*(*)");
+      else
+	{
+	  retcode = f77_get_dynamic_upperbound (type, &upper_bound);
+
+	  if (retcode == BOUND_FETCH_ERROR)
+	    fprintf_filtered (stream, "character*???");
+	  else
+	    fprintf_filtered (stream, "character*%d", upper_bound);
+	}
+      break;
+
+    default_case:
+    default:
+      /* Handle types not explicitly handled by the other cases,
+	 such as fundamental types.  For these, just print whatever
+	 the type name is, as recorded in the type itself.  If there
+	 is no type name, then complain. */
+      if (TYPE_NAME (type) != NULL)
+	fputs_filtered (TYPE_NAME (type), stream);
+      else
+	error ("Invalid type code (%d) in symbol table.", TYPE_CODE (type));
+      break;
+    }
+}
diff --git a/gdb/f-valprint.c b/gdb/f-valprint.c
new file mode 100644
index 0000000..bb0b1d0
--- /dev/null
+++ b/gdb/f-valprint.c
@@ -0,0 +1,767 @@
+/* Support for printing Fortran values for GDB, the GNU debugger.
+   Copyright 1993, 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Motorola.  Adapted from the C definitions by Farooq Butt
+   (fmbutt@engage.sps.mot.com), additionally worked over by Stan Shebs.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "demangle.h"
+#include "valprint.h"
+#include "language.h"
+#include "f-lang.h" 
+#include "frame.h"
+#include "gdbcore.h"
+#include "command.h"
+
+#if 0
+static int there_is_a_visible_common_named PARAMS ((char *));
+#endif
+
+static void info_common_command PARAMS ((char *, int));
+static void list_all_visible_commons PARAMS ((char *));
+static void f77_print_array PARAMS ((struct type *, char *, CORE_ADDR,
+				     GDB_FILE *, int, int, int,
+				     enum val_prettyprint));
+static void f77_print_array_1 PARAMS ((int, int, struct type *, char *,
+				       CORE_ADDR, GDB_FILE *, int, int, int,
+				       enum val_prettyprint));
+static void f77_create_arrayprint_offset_tbl PARAMS ((struct type *,
+						      GDB_FILE *));
+static void f77_get_dynamic_length_of_aggregate PARAMS ((struct type *));
+
+int f77_array_offset_tbl[MAX_FORTRAN_DIMS+1][2];
+
+/* Array which holds offsets to be applied to get a row's elements
+   for a given array. Array also holds the size of each subarray.  */
+
+/* The following macro gives us the size of the nth dimension, Where 
+   n is 1 based. */ 
+
+#define F77_DIM_SIZE(n) (f77_array_offset_tbl[n][1])
+
+/* The following gives us the offset for row n where n is 1-based. */ 
+
+#define F77_DIM_OFFSET(n) (f77_array_offset_tbl[n][0])
+
+int 
+f77_get_dynamic_lowerbound (type, lower_bound)
+     struct type *type;
+     int *lower_bound; 
+{
+  CORE_ADDR current_frame_addr;   
+  CORE_ADDR ptr_to_lower_bound; 
+  
+  switch (TYPE_ARRAY_LOWER_BOUND_TYPE (type))
+    {
+    case BOUND_BY_VALUE_ON_STACK:
+      current_frame_addr = selected_frame->frame;
+      if (current_frame_addr > 0) 
+	{
+	  *lower_bound = 
+	    read_memory_integer (current_frame_addr + 
+				 TYPE_ARRAY_LOWER_BOUND_VALUE (type),
+				 4);
+	}
+      else
+	{
+	  *lower_bound = DEFAULT_LOWER_BOUND; 
+	  return BOUND_FETCH_ERROR; 
+	}
+      break; 
+      
+    case BOUND_SIMPLE:
+      *lower_bound = TYPE_ARRAY_LOWER_BOUND_VALUE (type);
+      break; 
+      
+    case BOUND_CANNOT_BE_DETERMINED: 
+      error ("Lower bound may not be '*' in F77"); 
+      break; 
+      
+    case BOUND_BY_REF_ON_STACK:
+      current_frame_addr = selected_frame->frame;
+      if (current_frame_addr > 0) 
+	{
+	  ptr_to_lower_bound = 
+	    read_memory_integer (current_frame_addr + 
+				 TYPE_ARRAY_LOWER_BOUND_VALUE (type),
+				 4);
+	  *lower_bound = read_memory_integer (ptr_to_lower_bound, 4); 
+	}
+      else
+	{
+	  *lower_bound = DEFAULT_LOWER_BOUND; 
+	  return BOUND_FETCH_ERROR; 
+	}
+      break; 
+      
+    case BOUND_BY_REF_IN_REG: 
+    case BOUND_BY_VALUE_IN_REG: 
+    default: 
+      error ("??? unhandled dynamic array bound type ???");
+      break; 
+    }
+  return BOUND_FETCH_OK;
+}
+
+int 
+f77_get_dynamic_upperbound (type, upper_bound)
+     struct type *type;
+     int *upper_bound;
+{
+  CORE_ADDR current_frame_addr = 0;
+  CORE_ADDR ptr_to_upper_bound; 
+  
+  switch (TYPE_ARRAY_UPPER_BOUND_TYPE (type))
+    {
+    case BOUND_BY_VALUE_ON_STACK:
+      current_frame_addr = selected_frame->frame;
+      if (current_frame_addr > 0) 
+	{
+	  *upper_bound = 
+	    read_memory_integer (current_frame_addr + 
+				 TYPE_ARRAY_UPPER_BOUND_VALUE (type),
+				 4);
+	}
+      else
+	{
+	  *upper_bound = DEFAULT_UPPER_BOUND; 
+	  return BOUND_FETCH_ERROR; 
+	}
+      break; 
+      
+    case BOUND_SIMPLE:
+      *upper_bound = TYPE_ARRAY_UPPER_BOUND_VALUE (type);
+      break; 
+      
+    case BOUND_CANNOT_BE_DETERMINED: 
+      /* we have an assumed size array on our hands. Assume that 
+	 upper_bound == lower_bound so that we show at least 
+	 1 element.If the user wants to see more elements, let 
+	 him manually ask for 'em and we'll subscript the 
+	 array and show him */
+      f77_get_dynamic_lowerbound (type, upper_bound);
+      break; 
+      
+    case BOUND_BY_REF_ON_STACK:
+      current_frame_addr = selected_frame->frame;
+      if (current_frame_addr > 0) 
+	{
+	  ptr_to_upper_bound = 
+	    read_memory_integer (current_frame_addr + 
+				 TYPE_ARRAY_UPPER_BOUND_VALUE (type),
+				 4);
+	  *upper_bound = read_memory_integer(ptr_to_upper_bound, 4); 
+	}
+      else
+	{
+	  *upper_bound = DEFAULT_UPPER_BOUND; 
+	  return BOUND_FETCH_ERROR;
+	}
+      break; 
+      
+    case BOUND_BY_REF_IN_REG: 
+    case BOUND_BY_VALUE_IN_REG: 
+    default: 
+      error ("??? unhandled dynamic array bound type ???");
+      break; 
+    }
+  return BOUND_FETCH_OK;
+}
+
+/* Obtain F77 adjustable array dimensions */ 
+
+static void
+f77_get_dynamic_length_of_aggregate (type)
+     struct type *type;
+{
+  int upper_bound = -1;
+  int lower_bound = 1; 
+  int retcode; 
+  
+  /* Recursively go all the way down into a possibly multi-dimensional
+     F77 array and get the bounds.  For simple arrays, this is pretty
+     easy but when the bounds are dynamic, we must be very careful 
+     to add up all the lengths correctly.  Not doing this right 
+     will lead to horrendous-looking arrays in parameter lists.
+     
+     This function also works for strings which behave very 
+     similarly to arrays.  */ 
+  
+  if (TYPE_CODE(TYPE_TARGET_TYPE (type)) == TYPE_CODE_ARRAY
+      || TYPE_CODE(TYPE_TARGET_TYPE (type)) == TYPE_CODE_STRING)
+    f77_get_dynamic_length_of_aggregate (TYPE_TARGET_TYPE (type));
+  
+  /* Recursion ends here, start setting up lengths.  */ 
+  retcode = f77_get_dynamic_lowerbound (type, &lower_bound); 
+  if (retcode == BOUND_FETCH_ERROR)
+    error ("Cannot obtain valid array lower bound"); 
+  
+  retcode = f77_get_dynamic_upperbound (type, &upper_bound); 
+  if (retcode == BOUND_FETCH_ERROR)
+    error ("Cannot obtain valid array upper bound"); 
+  
+  /* Patch in a valid length value. */ 
+  
+  TYPE_LENGTH (type) =
+    (upper_bound - lower_bound + 1) * TYPE_LENGTH (check_typedef (TYPE_TARGET_TYPE (type)));
+}       
+
+/* Function that sets up the array offset,size table for the array 
+   type "type".  */ 
+
+static void 
+f77_create_arrayprint_offset_tbl (type, stream)
+     struct type *type;
+     GDB_FILE *stream;
+{
+  struct type *tmp_type;
+  int eltlen;
+  int ndimen = 1;
+  int upper, lower, retcode; 
+  
+  tmp_type = type; 
+  
+  while ((TYPE_CODE (tmp_type) == TYPE_CODE_ARRAY)) 
+    {
+      if (TYPE_ARRAY_UPPER_BOUND_TYPE (tmp_type) == BOUND_CANNOT_BE_DETERMINED)
+	fprintf_filtered (stream, "<assumed size array> "); 
+      
+      retcode = f77_get_dynamic_upperbound (tmp_type, &upper);
+      if (retcode == BOUND_FETCH_ERROR)
+	error ("Cannot obtain dynamic upper bound"); 
+      
+      retcode = f77_get_dynamic_lowerbound(tmp_type,&lower); 
+      if (retcode == BOUND_FETCH_ERROR)
+	error("Cannot obtain dynamic lower bound"); 
+      
+      F77_DIM_SIZE (ndimen) = upper - lower + 1;
+      
+      tmp_type = TYPE_TARGET_TYPE (tmp_type);
+      ndimen++; 
+    }
+  
+  /* Now we multiply eltlen by all the offsets, so that later we 
+     can print out array elements correctly.  Up till now we 
+     know an offset to apply to get the item but we also 
+     have to know how much to add to get to the next item */
+  
+  ndimen--;
+  eltlen = TYPE_LENGTH (tmp_type); 
+  F77_DIM_OFFSET (ndimen) = eltlen;
+  while (--ndimen > 0)
+    {
+      eltlen *= F77_DIM_SIZE (ndimen + 1);
+      F77_DIM_OFFSET (ndimen) = eltlen;
+    }
+}
+
+/* Actual function which prints out F77 arrays, Valaddr == address in 
+   the superior.  Address == the address in the inferior.  */
+
+static void 
+f77_print_array_1 (nss, ndimensions, type, valaddr, address, 
+		   stream, format, deref_ref, recurse, pretty)
+     int nss;
+     int ndimensions; 
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  int i;
+  
+  if (nss != ndimensions)
+    {
+      for (i = 0; i< F77_DIM_SIZE(nss); i++)
+	{
+	  fprintf_filtered (stream, "( ");
+	  f77_print_array_1 (nss + 1, ndimensions, TYPE_TARGET_TYPE (type),
+			    valaddr + i * F77_DIM_OFFSET (nss),
+			    address + i * F77_DIM_OFFSET (nss), 
+			    stream, format, deref_ref, recurse, pretty);
+	  fprintf_filtered (stream, ") ");
+	}
+    }
+  else
+    {
+      for (i = 0; (i < F77_DIM_SIZE (nss) && i < print_max); i++)
+	{
+	  val_print (TYPE_TARGET_TYPE (type),
+		     valaddr + i * F77_DIM_OFFSET (ndimensions),
+                     0,
+		     address + i * F77_DIM_OFFSET (ndimensions),
+		     stream, format, deref_ref, recurse, pretty); 
+
+	  if (i != (F77_DIM_SIZE (nss) - 1))
+	    fprintf_filtered (stream, ", "); 
+	  
+	  if (i == print_max - 1)
+	    fprintf_filtered (stream, "...");
+	}
+    }
+}
+
+/* This function gets called to print an F77 array, we set up some 
+   stuff and then immediately call f77_print_array_1() */
+
+static void 
+f77_print_array (type, valaddr, address, stream, format, deref_ref, recurse, 
+		 pretty)
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  int ndimensions; 
+  
+  ndimensions = calc_f77_array_dims (type); 
+  
+  if (ndimensions > MAX_FORTRAN_DIMS || ndimensions < 0)
+    error ("Type node corrupt! F77 arrays cannot have %d subscripts (%d Max)",
+	   ndimensions, MAX_FORTRAN_DIMS);
+  
+  /* Since F77 arrays are stored column-major, we set up an 
+     offset table to get at the various row's elements. The 
+     offset table contains entries for both offset and subarray size. */ 
+  
+  f77_create_arrayprint_offset_tbl (type, stream); 
+  
+  f77_print_array_1 (1, ndimensions, type, valaddr, address, stream, format, 
+                     deref_ref, recurse, pretty);
+}
+
+
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+   the inferior at address ADDRESS, onto stdio stream STREAM according to
+   FORMAT (a letter or 0 for natural format).  The data at VALADDR is in
+   target byte order.
+   
+   If the data are a string pointer, returns the number of string characters
+   printed.
+   
+   If DEREF_REF is nonzero, then dereference references, otherwise just print
+   them like pointers.
+   
+   The PRETTY parameter controls prettyprinting.  */
+
+int
+f_val_print (type, valaddr, embedded_offset, address, stream, format, deref_ref, recurse,
+	     pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  register unsigned int i = 0;		/* Number of characters printed */
+  struct type *elttype;
+  LONGEST val;
+  CORE_ADDR addr;
+  
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_STRING: 
+      f77_get_dynamic_length_of_aggregate (type);
+      LA_PRINT_STRING (stream, valaddr, TYPE_LENGTH (type), 1, 0);
+      break;
+      
+    case TYPE_CODE_ARRAY:
+      fprintf_filtered (stream, "("); 
+      f77_print_array (type, valaddr, address, stream, format, 
+		       deref_ref, recurse, pretty); 
+      fprintf_filtered (stream, ")");
+      break;
+#if 0
+      /* Array of unspecified length: treat like pointer to first elt.  */
+      valaddr = (char *) &address;
+      /* FALL THROUGH */
+#endif 
+    case TYPE_CODE_PTR:
+      if (format && format != 's')
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	  break;
+	}
+      else
+	{
+	  addr = unpack_pointer (type, valaddr);
+	  elttype = check_typedef (TYPE_TARGET_TYPE (type));
+	  
+	  if (TYPE_CODE (elttype) == TYPE_CODE_FUNC)
+	    {
+	      /* Try to print what function it points to.  */
+	      print_address_demangle (addr, stream, demangle);
+	      /* Return value is irrelevant except for string pointers.  */
+	      return 0;
+	    }
+	  
+	  if (addressprint && format != 's')
+	    fprintf_filtered (stream, "0x%x", addr);
+	  
+	  /* For a pointer to char or unsigned char, also print the string
+	     pointed to, unless pointer is null.  */
+	  if (TYPE_LENGTH (elttype) == 1
+	      && TYPE_CODE (elttype) == TYPE_CODE_INT
+	      && (format == 0 || format == 's')
+	      && addr != 0)
+	    i = val_print_string (addr, -1, TYPE_LENGTH (elttype), stream);
+	  
+	  /* Return number of characters printed, plus one for the
+	     terminating null if we have "reached the end".  */
+	  return (i + (print_max && i != print_max));
+	}
+      break;
+      
+    case TYPE_CODE_FUNC:
+      if (format)
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	  break;
+	}
+      /* FIXME, we should consider, at least for ANSI C language, eliminating
+	 the distinction made between FUNCs and POINTERs to FUNCs.  */
+      fprintf_filtered (stream, "{");
+      type_print (type, "", stream, -1);
+      fprintf_filtered (stream, "} ");
+      /* Try to print what function it points to, and its address.  */
+      print_address_demangle (address, stream, demangle);
+      break;
+      
+    case TYPE_CODE_INT:
+      format = format ? format : output_format;
+      if (format)
+	print_scalar_formatted (valaddr, type, format, 0, stream);
+      else
+	{
+	  val_print_type_code_int (type, valaddr, stream);
+	  /* C and C++ has no single byte int type, char is used instead.
+	     Since we don't know whether the value is really intended to
+	     be used as an integer or a character, print the character
+	     equivalent as well. */
+	  if (TYPE_LENGTH (type) == 1)
+	    {
+	      fputs_filtered (" ", stream);
+	      LA_PRINT_CHAR ((unsigned char) unpack_long (type, valaddr),
+			     stream);
+	    }
+	}
+      break;
+      
+    case TYPE_CODE_FLT:
+      if (format)
+	print_scalar_formatted (valaddr, type, format, 0, stream);
+      else
+	print_floating (valaddr, type, stream);
+      break;
+      
+    case TYPE_CODE_VOID:
+      fprintf_filtered (stream, "VOID");
+      break;
+      
+    case TYPE_CODE_ERROR:
+      fprintf_filtered (stream, "<error type>");
+      break;
+      
+    case TYPE_CODE_RANGE:
+      /* FIXME, we should not ever have to print one of these yet.  */
+      fprintf_filtered (stream, "<range type>");
+      break;
+      
+    case TYPE_CODE_BOOL:
+      format = format ? format : output_format;
+      if (format)
+	print_scalar_formatted (valaddr, type, format, 0, stream);
+      else
+	{
+          val = 0; 
+          switch (TYPE_LENGTH(type))
+	    {
+	    case 1:
+	      val = unpack_long (builtin_type_f_logical_s1, valaddr);
+	      break ; 
+	      
+	    case 2: 
+	      val = unpack_long (builtin_type_f_logical_s2, valaddr);
+	      break ; 
+	      
+	    case 4: 
+	      val = unpack_long (builtin_type_f_logical, valaddr);
+	      break ; 
+	      
+	    default:
+	      error ("Logicals of length %d bytes not supported",
+		     TYPE_LENGTH (type));
+	      
+	    }
+	  
+          if (val == 0) 
+	    fprintf_filtered (stream, ".FALSE.");
+          else 
+	    if (val == 1) 
+	      fprintf_filtered (stream, ".TRUE.");
+	    else
+	      /* Not a legitimate logical type, print as an integer.  */
+	      {
+		/* Bash the type code temporarily.  */
+		TYPE_CODE (type) = TYPE_CODE_INT;
+		f_val_print (type, valaddr, 0, address, stream, format, 
+			     deref_ref, recurse, pretty); 
+		/* Restore the type code so later uses work as intended. */
+		TYPE_CODE (type) = TYPE_CODE_BOOL; 
+	      }
+	}
+      break;
+      
+    case TYPE_CODE_COMPLEX:
+      switch (TYPE_LENGTH (type))
+	{
+	case 8:  type = builtin_type_f_real;  break;
+	case 16:  type = builtin_type_f_real_s8;  break;
+	case 32:  type = builtin_type_f_real_s16;  break;
+	default:
+	  error ("Cannot print out complex*%d variables", TYPE_LENGTH(type)); 
+	}
+      fputs_filtered ("(", stream);
+      print_floating (valaddr, type, stream);
+      fputs_filtered (",", stream);
+      print_floating (valaddr, type, stream);
+      fputs_filtered (")", stream);
+      break;
+      
+    case TYPE_CODE_UNDEF:
+      /* This happens (without TYPE_FLAG_STUB set) on systems which don't use
+	 dbx xrefs (NO_DBX_XREFS in gcc) if a file has a "struct foo *bar"
+	 and no complete type for struct foo in that file.  */
+      fprintf_filtered (stream, "<incomplete type>");
+      break;
+      
+    default:
+      error ("Invalid F77 type code %d in symbol table.", TYPE_CODE (type));
+    }
+  gdb_flush (stream);
+  return 0;
+}
+
+static void
+list_all_visible_commons (funname)
+     char *funname;
+{
+  SAVED_F77_COMMON_PTR  tmp;
+  
+  tmp = head_common_list;
+  
+  printf_filtered ("All COMMON blocks visible at this level:\n\n");
+  
+  while (tmp != NULL)
+    {
+      if (STREQ(tmp->owning_function,funname))
+	printf_filtered ("%s\n", tmp->name); 
+      
+      tmp = tmp->next;
+    }
+}
+
+/* This function is used to print out the values in a given COMMON 
+   block. It will always use the most local common block of the 
+   given name */ 
+
+static void 
+info_common_command (comname, from_tty)
+     char *comname;
+     int from_tty;
+{
+  SAVED_F77_COMMON_PTR  the_common; 
+  COMMON_ENTRY_PTR entry; 
+  struct frame_info *fi;
+  register char *funname = 0;
+  struct symbol *func;
+  
+  /* We have been told to display the contents of F77 COMMON 
+     block supposedly visible in this function.  Let us 
+     first make sure that it is visible and if so, let 
+     us display its contents */ 
+  
+  fi = selected_frame; 
+  
+  if (fi == NULL)
+    error ("No frame selected"); 
+  
+  /* The following is generally ripped off from stack.c's routine 
+     print_frame_info() */ 
+  
+  func = find_pc_function (fi->pc);
+  if (func)
+    {
+      /* In certain pathological cases, the symtabs give the wrong
+	 function (when we are in the first function in a file which
+	 is compiled without debugging symbols, the previous function
+	 is compiled with debugging symbols, and the "foo.o" symbol
+	 that is supposed to tell us where the file with debugging symbols
+	 ends has been truncated by ar because it is longer than 15
+	 characters).
+	 
+	 So look in the minimal symbol tables as well, and if it comes
+	 up with a larger address for the function use that instead.
+	 I don't think this can ever cause any problems; there shouldn't
+	 be any minimal symbols in the middle of a function.
+	 FIXME:  (Not necessarily true.  What about text labels) */
+      
+      struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (fi->pc);
+      
+      if (msymbol != NULL
+	  && (SYMBOL_VALUE_ADDRESS (msymbol) 
+	      > BLOCK_START (SYMBOL_BLOCK_VALUE (func))))
+	funname = SYMBOL_NAME (msymbol);
+      else
+	funname = SYMBOL_NAME (func);
+    }
+  else
+    {
+      register struct minimal_symbol *msymbol =
+	lookup_minimal_symbol_by_pc (fi->pc);
+      
+      if (msymbol != NULL)
+	funname = SYMBOL_NAME (msymbol);
+    }
+  
+  /* If comname is NULL, we assume the user wishes to see the 
+     which COMMON blocks are visible here and then return */ 
+  
+  if (comname == 0)
+    {
+      list_all_visible_commons (funname);
+      return; 
+    }
+  
+  the_common = find_common_for_function (comname,funname); 
+  
+  if (the_common)
+    {
+      if (STREQ(comname,BLANK_COMMON_NAME_LOCAL))
+	printf_filtered ("Contents of blank COMMON block:\n");
+      else 
+	printf_filtered ("Contents of F77 COMMON block '%s':\n",comname); 
+      
+      printf_filtered ("\n"); 
+      entry = the_common->entries; 
+      
+      while (entry != NULL)
+	{
+	  printf_filtered ("%s = ",SYMBOL_NAME(entry->symbol)); 
+	  print_variable_value (entry->symbol, fi, gdb_stdout); 
+	  printf_filtered ("\n"); 
+	  entry = entry->next; 
+	}
+    }
+  else 
+    printf_filtered ("Cannot locate the common block %s in function '%s'\n",
+		    comname, funname);
+}
+
+/* This function is used to determine whether there is a
+   F77 common block visible at the current scope called 'comname'. */ 
+
+#if 0
+static int
+there_is_a_visible_common_named (comname)
+     char *comname;
+{
+  SAVED_F77_COMMON_PTR  the_common; 
+  struct frame_info *fi;
+  register char *funname = 0;
+  struct symbol *func;
+  
+  if (comname == NULL)
+    error ("Cannot deal with NULL common name!"); 
+  
+  fi = selected_frame; 
+  
+  if (fi == NULL)
+    error ("No frame selected"); 
+  
+  /* The following is generally ripped off from stack.c's routine 
+     print_frame_info() */ 
+  
+  func = find_pc_function (fi->pc);
+  if (func)
+    {
+      /* In certain pathological cases, the symtabs give the wrong
+	 function (when we are in the first function in a file which
+	 is compiled without debugging symbols, the previous function
+	 is compiled with debugging symbols, and the "foo.o" symbol
+	 that is supposed to tell us where the file with debugging symbols
+	 ends has been truncated by ar because it is longer than 15
+	 characters).
+	 
+	 So look in the minimal symbol tables as well, and if it comes
+	 up with a larger address for the function use that instead.
+	 I don't think this can ever cause any problems; there shouldn't
+	 be any minimal symbols in the middle of a function.
+	 FIXME:  (Not necessarily true.  What about text labels) */
+      
+      struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (fi->pc);
+      
+      if (msymbol != NULL
+	  && (SYMBOL_VALUE_ADDRESS (msymbol) 
+	      > BLOCK_START (SYMBOL_BLOCK_VALUE (func))))
+	funname = SYMBOL_NAME (msymbol);
+      else
+	funname = SYMBOL_NAME (func);
+    }
+  else
+    {
+      register struct minimal_symbol *msymbol = 
+	lookup_minimal_symbol_by_pc (fi->pc);
+      
+      if (msymbol != NULL)
+	funname = SYMBOL_NAME (msymbol);
+    }
+  
+  the_common = find_common_for_function (comname, funname); 
+  
+  return (the_common ? 1 : 0);
+}
+#endif
+
+void
+_initialize_f_valprint ()
+{
+  add_info ("common", info_common_command,
+	    "Print out the values contained in a Fortran COMMON block.");
+  if (xdb_commands)
+    add_com("lc", class_info, info_common_command,
+	    "Print out the values contained in a Fortran COMMON block.");
+}
diff --git a/gdb/findvar.c b/gdb/findvar.c
new file mode 100644
index 0000000..5bfecc2
--- /dev/null
+++ b/gdb/findvar.c
@@ -0,0 +1,1630 @@
+/* Find a variable's value in memory, for GDB, the GNU debugger.
+   Copyright 1986, 87, 89, 91, 94, 95, 96, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "frame.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdb_string.h"
+#include "floatformat.h"
+#include "symfile.h"	/* for overlay functions */
+
+/* This is used to indicate that we don't know the format of the floating point
+   number.  Typically, this is useful for native ports, where the actual format
+   is irrelevant, since no conversions will be taking place.  */
+
+const struct floatformat floatformat_unknown;
+
+/* Registers we shouldn't try to store.  */
+#if !defined (CANNOT_STORE_REGISTER)
+#define CANNOT_STORE_REGISTER(regno) 0
+#endif
+
+static void write_register_gen PARAMS ((int, char *));
+
+/* Basic byte-swapping routines.  GDB has needed these for a long time...
+   All extract a target-format integer at ADDR which is LEN bytes long.  */
+
+#if TARGET_CHAR_BIT != 8 || HOST_CHAR_BIT != 8
+  /* 8 bit characters are a pretty safe assumption these days, so we
+     assume it throughout all these swapping routines.  If we had to deal with
+     9 bit characters, we would need to make len be in bits and would have
+     to re-write these routines...  */
+  you lose
+#endif
+
+LONGEST
+extract_signed_integer (addr, len)
+     PTR addr;
+     int len;
+{
+  LONGEST retval;
+  unsigned char *p;
+  unsigned char *startaddr = (unsigned char *)addr;
+  unsigned char *endaddr = startaddr + len;
+
+  if (len > (int) sizeof (LONGEST))
+    error ("\
+That operation is not available on integers of more than %d bytes.",
+	   sizeof (LONGEST));
+
+  /* Start at the most significant end of the integer, and work towards
+     the least significant.  */
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      p = startaddr;
+      /* Do the sign extension once at the start.  */
+      retval = ((LONGEST)*p ^ 0x80) - 0x80;
+      for (++p; p < endaddr; ++p)
+	retval = (retval << 8) | *p;
+    }
+  else
+    {
+      p = endaddr - 1;
+      /* Do the sign extension once at the start.  */
+      retval = ((LONGEST)*p ^ 0x80) - 0x80;
+      for (--p; p >= startaddr; --p)
+	retval = (retval << 8) | *p;
+    }
+  return retval;
+}
+
+ULONGEST
+extract_unsigned_integer (addr, len)
+     PTR addr;
+     int len;
+{
+  ULONGEST retval;
+  unsigned char *p;
+  unsigned char *startaddr = (unsigned char *)addr;
+  unsigned char *endaddr = startaddr + len;
+
+  if (len > (int) sizeof (ULONGEST))
+    error ("\
+That operation is not available on integers of more than %d bytes.",
+	   sizeof (ULONGEST));
+
+  /* Start at the most significant end of the integer, and work towards
+     the least significant.  */
+  retval = 0;
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = startaddr; p < endaddr; ++p)
+	retval = (retval << 8) | *p;
+    }
+  else
+    {
+      for (p = endaddr - 1; p >= startaddr; --p)
+	retval = (retval << 8) | *p;
+    }
+  return retval;
+}
+
+/* Sometimes a long long unsigned integer can be extracted as a
+   LONGEST value.  This is done so that we can print these values
+   better.  If this integer can be converted to a LONGEST, this
+   function returns 1 and sets *PVAL.  Otherwise it returns 0.  */
+
+int
+extract_long_unsigned_integer (addr, orig_len, pval)
+     PTR addr;
+     int orig_len;
+     LONGEST *pval;
+{
+  char *p, *first_addr;
+  int len;
+
+  len = orig_len;
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = (char *) addr;
+	   len > (int) sizeof (LONGEST) && p < (char *) addr + orig_len;
+	   p++)
+	{
+	  if (*p == 0)
+	    len--;
+	  else
+	    break;
+	}
+      first_addr = p;
+    }
+  else
+    {
+      first_addr = (char *) addr;
+      for (p = (char *) addr + orig_len - 1;
+	   len > (int) sizeof (LONGEST) && p >= (char *) addr;
+	   p--)
+	{
+	  if (*p == 0)
+	    len--;
+	  else
+	    break;
+	}
+    }
+
+  if (len <= (int) sizeof (LONGEST))
+    {
+      *pval = (LONGEST) extract_unsigned_integer (first_addr,
+						  sizeof (LONGEST));
+      return 1;
+    }
+
+  return 0;
+}
+
+CORE_ADDR
+extract_address (addr, len)
+     PTR addr;
+     int len;
+{
+  /* Assume a CORE_ADDR can fit in a LONGEST (for now).  Not sure
+     whether we want this to be true eventually.  */
+  return (CORE_ADDR)extract_unsigned_integer (addr, len);
+}
+
+void
+store_signed_integer (addr, len, val)
+     PTR addr;
+     int len;
+     LONGEST val;
+{
+  unsigned char *p;
+  unsigned char *startaddr = (unsigned char *)addr;
+  unsigned char *endaddr = startaddr + len;
+
+  /* Start at the least significant end of the integer, and work towards
+     the most significant.  */
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = endaddr - 1; p >= startaddr; --p)
+	{
+	  *p = val & 0xff;
+	  val >>= 8;
+	}
+    }
+  else
+    {
+      for (p = startaddr; p < endaddr; ++p)
+	{
+	  *p = val & 0xff;
+	  val >>= 8;
+	}
+    }
+}
+
+void
+store_unsigned_integer (addr, len, val)
+     PTR addr;
+     int len;
+     ULONGEST val;
+{
+  unsigned char *p;
+  unsigned char *startaddr = (unsigned char *)addr;
+  unsigned char *endaddr = startaddr + len;
+
+  /* Start at the least significant end of the integer, and work towards
+     the most significant.  */
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = endaddr - 1; p >= startaddr; --p)
+	{
+	  *p = val & 0xff;
+	  val >>= 8;
+	}
+    }
+  else
+    {
+      for (p = startaddr; p < endaddr; ++p)
+	{
+	  *p = val & 0xff;
+	  val >>= 8;
+	}
+    }
+}
+
+/* Store the literal address "val" into
+   gdb-local memory pointed to by "addr"
+   for "len" bytes. */
+void
+store_address (addr, len, val)
+     PTR addr;
+     int len;
+     LONGEST val;
+{
+  if( TARGET_BYTE_ORDER == BIG_ENDIAN
+      &&  len != sizeof( LONGEST )) {
+    /* On big-endian machines (e.g., HPPA 2.0, narrow mode)
+     * just letting this fall through to the call below will
+     * lead to the wrong bits being stored.
+     *
+     * Only the simplest case is fixed here, the others just
+     * get the old behavior.
+     */
+    if( (len == sizeof( CORE_ADDR ))
+	&&  (sizeof( LONGEST ) == 2 * sizeof( CORE_ADDR ))) {
+      /* Watch out!  The high bits are garbage! */
+      CORE_ADDR coerce[2];
+      *(LONGEST*)&coerce = val;
+
+      store_unsigned_integer (addr, len, coerce[1] ); /* BIG_ENDIAN code! */
+      return;
+    }
+  }
+  store_unsigned_integer (addr, len, val);
+}
+
+/* Swap LEN bytes at BUFFER between target and host byte-order.  */
+#define SWAP_FLOATING(buffer,len) \
+  do                                                                    \
+    {                                                                   \
+      if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER)                         \
+        {                                                               \
+          char tmp;                                                     \
+          char *p = (char *)(buffer);                                   \
+          char *q = ((char *)(buffer)) + len - 1;                       \
+          for (; p < q; p++, q--)                                       \
+            {                                                           \
+              tmp = *q;                                                 \
+              *q = *p;                                                  \
+              *p = tmp;                                                 \
+            }                                                           \
+        }                                                               \
+    }                                                                   \
+  while (0)
+
+/* Extract a floating-point number from a target-order byte-stream at ADDR.
+   Returns the value as type DOUBLEST.
+
+   If the host and target formats agree, we just copy the raw data into the
+   appropriate type of variable and return, letting the host increase precision
+   as necessary.  Otherwise, we call the conversion routine and let it do the
+   dirty work.  */
+
+DOUBLEST
+extract_floating (addr, len)
+     PTR addr;
+     int len;
+{
+  DOUBLEST dretval;
+
+  if (len == sizeof (float))
+    {
+      if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
+	{
+	  float retval;
+
+	  memcpy (&retval, addr, sizeof (retval));
+	  return retval;
+	}
+      else
+	floatformat_to_doublest (TARGET_FLOAT_FORMAT, addr, &dretval);
+    }
+  else if (len == sizeof (double))
+    {
+      if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
+	{
+	  double retval;
+
+	  memcpy (&retval, addr, sizeof (retval));
+	  return retval;
+	}
+      else
+	floatformat_to_doublest (TARGET_DOUBLE_FORMAT, addr, &dretval);
+    }
+  else if (len == sizeof (DOUBLEST))
+    {
+      if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
+	{
+	  DOUBLEST retval;
+
+	  memcpy (&retval, addr, sizeof (retval));
+	  return retval;
+	}
+      else
+	floatformat_to_doublest (TARGET_LONG_DOUBLE_FORMAT, addr, &dretval);
+    }
+  else
+    {
+      error ("Can't deal with a floating point number of %d bytes.", len);
+    }
+
+  return dretval;
+}
+
+void
+store_floating (addr, len, val)
+     PTR addr;
+     int len;
+     DOUBLEST val;
+{
+  if (len == sizeof (float))
+    {
+      if (HOST_FLOAT_FORMAT == TARGET_FLOAT_FORMAT)
+	{
+	  float floatval = val;
+
+	  memcpy (addr, &floatval, sizeof (floatval));
+	}
+      else
+	floatformat_from_doublest (TARGET_FLOAT_FORMAT, &val, addr);
+    }
+  else if (len == sizeof (double))
+    {
+      if (HOST_DOUBLE_FORMAT == TARGET_DOUBLE_FORMAT)
+	{
+	  double doubleval = val;
+
+	  memcpy (addr, &doubleval, sizeof (doubleval));
+	}
+      else
+	floatformat_from_doublest (TARGET_DOUBLE_FORMAT, &val, addr);
+    }
+  else if (len == sizeof (DOUBLEST))
+    {
+      if (HOST_LONG_DOUBLE_FORMAT == TARGET_LONG_DOUBLE_FORMAT)
+	memcpy (addr, &val, sizeof (val));
+      else
+	floatformat_from_doublest (TARGET_LONG_DOUBLE_FORMAT, &val, addr);
+    }
+  else
+    {
+      error ("Can't deal with a floating point number of %d bytes.", len);
+    }
+}
+
+#if !defined (GET_SAVED_REGISTER)
+
+/* Return the address in which frame FRAME's value of register REGNUM
+   has been saved in memory.  Or return zero if it has not been saved.
+   If REGNUM specifies the SP, the value we return is actually
+   the SP value, not an address where it was saved.  */
+
+CORE_ADDR
+find_saved_register (frame, regnum)
+     struct frame_info *frame;
+     int regnum;
+{
+  register struct frame_info *frame1 = NULL;
+  register CORE_ADDR addr = 0;
+
+  if (frame == NULL)		/* No regs saved if want current frame */
+    return 0;
+
+#ifdef HAVE_REGISTER_WINDOWS
+  /* We assume that a register in a register window will only be saved
+     in one place (since the name changes and/or disappears as you go
+     towards inner frames), so we only call get_frame_saved_regs on
+     the current frame.  This is directly in contradiction to the
+     usage below, which assumes that registers used in a frame must be
+     saved in a lower (more interior) frame.  This change is a result
+     of working on a register window machine; get_frame_saved_regs
+     always returns the registers saved within a frame, within the
+     context (register namespace) of that frame. */
+
+  /* However, note that we don't want this to return anything if
+     nothing is saved (if there's a frame inside of this one).  Also,
+     callers to this routine asking for the stack pointer want the
+     stack pointer saved for *this* frame; this is returned from the
+     next frame.  */
+     
+  if (REGISTER_IN_WINDOW_P(regnum))
+    {
+      frame1 = get_next_frame (frame);
+      if (!frame1) return 0;	/* Registers of this frame are active.  */
+      
+      /* Get the SP from the next frame in; it will be this
+	 current frame.  */
+      if (regnum != SP_REGNUM)
+	frame1 = frame;	
+	  
+      FRAME_INIT_SAVED_REGS (frame1);
+      return frame1->saved_regs[regnum];	/* ... which might be zero */
+    }
+#endif /* HAVE_REGISTER_WINDOWS */
+
+  /* Note that this next routine assumes that registers used in
+     frame x will be saved only in the frame that x calls and
+     frames interior to it.  This is not true on the sparc, but the
+     above macro takes care of it, so we should be all right. */
+  while (1)
+    {
+      QUIT;
+      frame1 = get_prev_frame (frame1);
+      if (frame1 == 0 || frame1 == frame)
+	break;
+      FRAME_INIT_SAVED_REGS (frame1);
+      if (frame1->saved_regs[regnum])
+	addr = frame1->saved_regs[regnum];
+    }
+
+  return addr;
+}
+
+/* Find register number REGNUM relative to FRAME and put its (raw,
+   target format) contents in *RAW_BUFFER.  Set *OPTIMIZED if the
+   variable was optimized out (and thus can't be fetched).  Set *LVAL
+   to lval_memory, lval_register, or not_lval, depending on whether
+   the value was fetched from memory, from a register, or in a strange
+   and non-modifiable way (e.g. a frame pointer which was calculated
+   rather than fetched).  Set *ADDRP to the address, either in memory
+   on as a REGISTER_BYTE offset into the registers array.
+
+   Note that this implementation never sets *LVAL to not_lval.  But
+   it can be replaced by defining GET_SAVED_REGISTER and supplying
+   your own.
+
+   The argument RAW_BUFFER must point to aligned memory.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  CORE_ADDR addr;
+
+  if (!target_has_registers)
+    error ("No registers.");
+
+  /* Normal systems don't optimize out things with register numbers.  */
+  if (optimized != NULL)
+    *optimized = 0;
+  addr = find_saved_register (frame, regnum);
+  if (addr != 0)
+    {
+      if (lval != NULL)
+	*lval = lval_memory;
+      if (regnum == SP_REGNUM)
+	{
+	  if (raw_buffer != NULL)
+	    {
+	      /* Put it back in target format.  */
+	      store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), (LONGEST)addr);
+	    }
+	  if (addrp != NULL)
+	    *addrp = 0;
+	  return;
+	}
+      if (raw_buffer != NULL)
+	read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
+    }
+  else
+    {
+      if (lval != NULL)
+	*lval = lval_register;
+      addr = REGISTER_BYTE (regnum);
+      if (raw_buffer != NULL)
+	read_register_gen (regnum, raw_buffer);
+    }
+  if (addrp != NULL)
+    *addrp = addr;
+}
+#endif /* GET_SAVED_REGISTER.  */
+
+/* Copy the bytes of register REGNUM, relative to the input stack frame,
+   into our memory at MYADDR, in target byte order.
+   The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
+
+   Returns 1 if could not be read, 0 if could.  */
+
+int
+read_relative_register_raw_bytes_for_frame (regnum, myaddr, frame)
+     int regnum;
+     char *myaddr;
+     struct frame_info *frame;
+{
+  int optim;
+  if (regnum == FP_REGNUM && frame)
+    {
+      /* Put it back in target format. */
+      store_address (myaddr, REGISTER_RAW_SIZE(FP_REGNUM),
+		     (LONGEST)FRAME_FP(frame));
+
+      return 0;
+    }
+
+  get_saved_register (myaddr, &optim, (CORE_ADDR *) NULL, frame,
+                      regnum, (enum lval_type *)NULL);
+
+  if (register_valid [regnum] < 0)
+    return 1;	/* register value not available */
+
+  return optim;
+}
+
+/* Copy the bytes of register REGNUM, relative to the current stack frame,
+   into our memory at MYADDR, in target byte order.
+   The number of bytes copied is REGISTER_RAW_SIZE (REGNUM).
+
+   Returns 1 if could not be read, 0 if could.  */
+
+int
+read_relative_register_raw_bytes (regnum, myaddr)
+     int regnum;
+     char *myaddr;
+{
+  return read_relative_register_raw_bytes_for_frame (regnum, myaddr, 
+						     selected_frame);
+}
+
+/* Return a `value' with the contents of register REGNUM
+   in its virtual format, with the type specified by
+   REGISTER_VIRTUAL_TYPE.  
+
+   NOTE: returns NULL if register value is not available.
+   Caller will check return value or die!  */
+
+value_ptr
+value_of_register (regnum)
+     int regnum;
+{
+  CORE_ADDR addr;
+  int optim;
+  register value_ptr reg_val;
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  enum lval_type lval;
+
+  get_saved_register (raw_buffer, &optim, &addr,
+		      selected_frame, regnum, &lval);
+
+  if (register_valid[regnum] < 0)
+    return NULL;	/* register value not available */
+
+  reg_val = allocate_value (REGISTER_VIRTUAL_TYPE (regnum));
+
+  /* Convert raw data to virtual format if necessary.  */
+
+#ifdef REGISTER_CONVERTIBLE
+  if (REGISTER_CONVERTIBLE (regnum))
+    {
+      REGISTER_CONVERT_TO_VIRTUAL (regnum, REGISTER_VIRTUAL_TYPE (regnum),
+				   raw_buffer, VALUE_CONTENTS_RAW (reg_val));
+    }
+  else
+#endif
+    if (REGISTER_RAW_SIZE (regnum) == REGISTER_VIRTUAL_SIZE (regnum))
+      memcpy (VALUE_CONTENTS_RAW (reg_val), raw_buffer,
+	      REGISTER_RAW_SIZE (regnum));
+    else
+      fatal ("Register \"%s\" (%d) has conflicting raw (%d) and virtual (%d) size",
+	     REGISTER_NAME (regnum), regnum,
+	     REGISTER_RAW_SIZE (regnum), REGISTER_VIRTUAL_SIZE (regnum));
+  VALUE_LVAL (reg_val) = lval;
+  VALUE_ADDRESS (reg_val) = addr;
+  VALUE_REGNO (reg_val) = regnum;
+  VALUE_OPTIMIZED_OUT (reg_val) = optim;
+  return reg_val;
+}
+
+/* Low level examining and depositing of registers.
+
+   The caller is responsible for making
+   sure that the inferior is stopped before calling the fetching routines,
+   or it will get garbage.  (a change from GDB version 3, in which
+   the caller got the value from the last stop).  */
+
+/* Contents of the registers in target byte order.
+   We allocate some extra slop since we do a lot of memcpy's around 
+   `registers', and failing-soft is better than failing hard.  */
+
+char registers[REGISTER_BYTES + /* SLOP */ 256];
+
+/* Nonzero if that register has been fetched,
+   -1 if register value not available. */
+SIGNED char register_valid[NUM_REGS];
+
+/* The thread/process associated with the current set of registers.  For now,
+   -1 is special, and means `no current process'.  */
+int registers_pid = -1;
+
+/* Indicate that registers may have changed, so invalidate the cache.  */
+
+void
+registers_changed ()
+{
+  int i;
+  int numregs = ARCH_NUM_REGS;
+
+  registers_pid = -1;
+
+  /* Force cleanup of any alloca areas if using C alloca instead of
+     a builtin alloca.  This particular call is used to clean up
+     areas allocated by low level target code which may build up
+     during lengthy interactions between gdb and the target before
+     gdb gives control to the user (ie watchpoints).  */
+  alloca (0);
+
+  for (i = 0; i < numregs; i++)
+    register_valid[i] = 0;
+
+  if (registers_changed_hook)
+    registers_changed_hook ();
+}
+
+/* Indicate that all registers have been fetched, so mark them all valid.  */
+void
+registers_fetched ()
+{
+  int i;
+  int numregs = ARCH_NUM_REGS;
+  for (i = 0; i < numregs; i++)
+    register_valid[i] = 1;
+}
+
+/* read_register_bytes and write_register_bytes are generally a *BAD* idea.
+   They are inefficient because they need to check for partial updates, which
+   can only be done by scanning through all of the registers and seeing if the
+   bytes that are being read/written fall inside of an invalid register.  [The
+    main reason this is necessary is that register sizes can vary, so a simple
+    index won't suffice.]  It is far better to call read_register_gen if you
+   want to get at the raw register contents, as it only takes a regno as an
+   argument, and therefore can't do a partial register update.  It would also
+   be good to have a write_register_gen for similar reasons.
+
+   Prior to the recent fixes to check for partial updates, both read and
+   write_register_bytes always checked to see if any registers were stale, and
+   then called target_fetch_registers (-1) to update the whole set.  This
+   caused really slowed things down for remote targets.  */
+
+/* Copy INLEN bytes of consecutive data from registers
+   starting with the INREGBYTE'th byte of register data
+   into memory at MYADDR.  */
+
+void
+read_register_bytes (inregbyte, myaddr, inlen)
+     int inregbyte;
+     char *myaddr;
+     int inlen;
+{
+  int inregend = inregbyte + inlen;
+  int regno;
+
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+
+  /* See if we are trying to read bytes from out-of-date registers.  If so,
+     update just those registers.  */
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      int regstart, regend;
+      int startin, endin;
+
+      if (register_valid[regno])
+	continue;
+
+      if (REGISTER_NAME (regno) == NULL || *REGISTER_NAME (regno) == '\0')
+	continue;
+
+      regstart = REGISTER_BYTE (regno);
+      regend = regstart + REGISTER_RAW_SIZE (regno);
+
+      startin = regstart >= inregbyte && regstart < inregend;
+      endin = regend > inregbyte && regend <= inregend;
+
+      if (!startin && !endin)
+	continue;
+
+      /* We've found an invalid register where at least one byte will be read.
+	 Update it from the target.  */
+
+      target_fetch_registers (regno);
+
+      if (!register_valid[regno])
+	error ("read_register_bytes:  Couldn't update register %d.", regno);
+    }
+
+  if (myaddr != NULL)
+    memcpy (myaddr, &registers[inregbyte], inlen);
+}
+
+/* Read register REGNO into memory at MYADDR, which must be large enough
+   for REGISTER_RAW_BYTES (REGNO).  Target byte-order.
+   If the register is known to be the size of a CORE_ADDR or smaller,
+   read_register can be used instead.  */
+void
+read_register_gen (regno, myaddr)
+     int regno;
+     char *myaddr;
+{
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+
+  if (!register_valid[regno])
+    target_fetch_registers (regno);
+  memcpy (myaddr, &registers[REGISTER_BYTE (regno)],
+	  REGISTER_RAW_SIZE (regno));
+}
+
+/* Write register REGNO at MYADDR to the target.  MYADDR points at
+   REGISTER_RAW_BYTES(REGNO), which must be in target byte-order.  */
+
+static void
+write_register_gen (regno, myaddr)
+     int regno;
+     char *myaddr;
+{
+  int size;
+
+  /* On the sparc, writing %g0 is a no-op, so we don't even want to change
+     the registers array if something writes to this register.  */
+  if (CANNOT_STORE_REGISTER (regno))
+    return;
+
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+
+  size = REGISTER_RAW_SIZE(regno);
+
+  /* If we have a valid copy of the register, and new value == old value,
+     then don't bother doing the actual store. */
+
+  if (register_valid [regno]
+      && memcmp (&registers[REGISTER_BYTE (regno)], myaddr, size) == 0)
+    return;
+  
+  target_prepare_to_store ();
+
+  memcpy (&registers[REGISTER_BYTE (regno)], myaddr, size);
+
+  register_valid [regno] = 1;
+
+  target_store_registers (regno);
+}
+
+/* Copy INLEN bytes of consecutive data from memory at MYADDR
+   into registers starting with the MYREGSTART'th byte of register data.  */
+
+void
+write_register_bytes (myregstart, myaddr, inlen)
+     int myregstart;
+     char *myaddr;
+     int inlen;
+{
+  int myregend = myregstart + inlen;
+  int regno;
+
+  target_prepare_to_store ();
+
+  /* Scan through the registers updating any that are covered by the range
+     myregstart<=>myregend using write_register_gen, which does nice things
+     like handling threads, and avoiding updates when the new and old contents
+     are the same.  */
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      int regstart, regend;
+      int startin, endin;
+      char regbuf[MAX_REGISTER_RAW_SIZE];
+
+      regstart = REGISTER_BYTE (regno);
+      regend = regstart + REGISTER_RAW_SIZE (regno);
+
+      startin = regstart >= myregstart && regstart < myregend;
+      endin = regend > myregstart && regend <= myregend;
+
+      if (!startin && !endin)
+	continue;		/* Register is completely out of range */
+
+      if (startin && endin)	/* register is completely in range */
+	{
+	  write_register_gen (regno, myaddr + (regstart - myregstart));
+	  continue;
+	}
+
+      /* We may be doing a partial update of an invalid register.  Update it
+	 from the target before scribbling on it.  */
+      read_register_gen (regno, regbuf);
+
+      if (startin)
+	memcpy (registers + regstart,
+		myaddr + regstart - myregstart,
+		myregend - regstart);
+      else			/* endin */
+	memcpy (registers + myregstart,
+		myaddr,
+		regend - myregstart);
+      target_store_registers (regno);
+    }
+}
+
+/* Return the raw contents of register REGNO, regarding it as an integer.  */
+/* This probably should be returning LONGEST rather than CORE_ADDR.  */
+
+CORE_ADDR
+read_register (regno)
+     int regno;
+{
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+
+  if (!register_valid[regno])
+    target_fetch_registers (regno);
+
+  return (CORE_ADDR)extract_address (&registers[REGISTER_BYTE (regno)],
+				     REGISTER_RAW_SIZE(regno));
+}
+
+CORE_ADDR
+read_register_pid (regno, pid)
+     int regno, pid;
+{
+  int save_pid;
+  CORE_ADDR retval;
+
+  if (pid == inferior_pid)
+    return read_register (regno);
+
+  save_pid = inferior_pid;
+
+  inferior_pid = pid;
+
+  retval = read_register (regno);
+
+  inferior_pid = save_pid;
+
+  return retval;
+}
+
+/* Store VALUE, into the raw contents of register number REGNO.
+   This should probably write a LONGEST rather than a CORE_ADDR */
+
+void
+write_register (regno, val)
+     int regno;
+     LONGEST val;
+{
+  PTR buf;
+  int size;
+
+  /* On the sparc, writing %g0 is a no-op, so we don't even want to change
+     the registers array if something writes to this register.  */
+  if (CANNOT_STORE_REGISTER (regno))
+    return;
+
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+
+  size = REGISTER_RAW_SIZE(regno);
+  buf = alloca (size);
+  store_signed_integer (buf, size, (LONGEST)val);
+
+  /* If we have a valid copy of the register, and new value == old value,
+     then don't bother doing the actual store. */
+
+  if (register_valid [regno]
+      && memcmp (&registers[REGISTER_BYTE (regno)], buf, size) == 0)
+    return;
+  
+  target_prepare_to_store ();
+
+  memcpy (&registers[REGISTER_BYTE (regno)], buf, size);
+
+  register_valid [regno] = 1;
+
+  target_store_registers (regno);
+}
+
+void
+write_register_pid (regno, val, pid)
+     int regno;
+     CORE_ADDR val;
+     int pid;
+{
+  int save_pid;
+
+  if (pid == inferior_pid)
+    {
+      write_register (regno, val);
+      return;
+    }
+
+  save_pid = inferior_pid;
+
+  inferior_pid = pid;
+
+  write_register (regno, val);
+
+  inferior_pid = save_pid;
+}
+
+/* Record that register REGNO contains VAL.
+   This is used when the value is obtained from the inferior or core dump,
+   so there is no need to store the value there.
+
+   If VAL is a NULL pointer, then it's probably an unsupported register.  We
+   just set it's value to all zeros.  We might want to record this fact, and
+   report it to the users of read_register and friends.
+*/
+
+void
+supply_register (regno, val)
+     int regno;
+     char *val;
+{
+#if 1
+  if (registers_pid != inferior_pid)
+    {
+      registers_changed ();
+      registers_pid = inferior_pid;
+    }
+#endif
+
+  register_valid[regno] = 1;
+  if (val)
+    memcpy (&registers[REGISTER_BYTE (regno)], val, REGISTER_RAW_SIZE (regno));
+  else
+    memset (&registers[REGISTER_BYTE (regno)], '\000', REGISTER_RAW_SIZE (regno));
+
+  /* On some architectures, e.g. HPPA, there are a few stray bits in some
+     registers, that the rest of the code would like to ignore.  */
+#ifdef CLEAN_UP_REGISTER_VALUE
+  CLEAN_UP_REGISTER_VALUE(regno, &registers[REGISTER_BYTE(regno)]);
+#endif
+}
+
+
+/* This routine is getting awfully cluttered with #if's.  It's probably
+   time to turn this into READ_PC and define it in the tm.h file.
+   Ditto for write_pc.  */
+
+CORE_ADDR
+read_pc_pid (pid)
+     int pid;
+{
+  int  saved_inferior_pid;
+  CORE_ADDR  pc_val;
+
+  /* In case pid != inferior_pid. */
+  saved_inferior_pid = inferior_pid;
+  inferior_pid = pid;
+  
+#ifdef TARGET_READ_PC
+  pc_val = TARGET_READ_PC (pid);
+#else
+  pc_val = ADDR_BITS_REMOVE ((CORE_ADDR) read_register_pid (PC_REGNUM, pid));
+#endif
+
+  inferior_pid = saved_inferior_pid;
+  return pc_val;
+}
+
+CORE_ADDR
+read_pc ()
+{
+  return read_pc_pid (inferior_pid);
+}
+
+void
+write_pc_pid (pc, pid)
+     CORE_ADDR pc;
+     int pid;
+{
+  int  saved_inferior_pid;
+
+  /* In case pid != inferior_pid. */
+  saved_inferior_pid = inferior_pid;
+  inferior_pid = pid;
+  
+#ifdef TARGET_WRITE_PC
+  TARGET_WRITE_PC (pc, pid);
+#else
+  write_register_pid (PC_REGNUM, pc, pid);
+#ifdef NPC_REGNUM
+  write_register_pid (NPC_REGNUM, pc + 4, pid);
+#ifdef NNPC_REGNUM
+  write_register_pid (NNPC_REGNUM, pc + 8, pid);
+#endif
+#endif
+#endif
+
+  inferior_pid = saved_inferior_pid;
+}
+
+void
+write_pc (pc)
+     CORE_ADDR pc;
+{
+  write_pc_pid (pc, inferior_pid);
+}
+
+/* Cope with strage ways of getting to the stack and frame pointers */
+
+CORE_ADDR
+read_sp ()
+{
+#ifdef TARGET_READ_SP
+  return TARGET_READ_SP ();
+#else
+  return read_register (SP_REGNUM);
+#endif
+}
+
+void
+write_sp (val)
+     CORE_ADDR val;
+{
+#ifdef TARGET_WRITE_SP
+  TARGET_WRITE_SP (val);
+#else
+  write_register (SP_REGNUM, val);
+#endif
+}
+
+CORE_ADDR
+read_fp ()
+{
+#ifdef TARGET_READ_FP
+  return TARGET_READ_FP ();
+#else
+  return read_register (FP_REGNUM);
+#endif
+}
+
+void
+write_fp (val)
+     CORE_ADDR val;
+{
+#ifdef TARGET_WRITE_FP
+  TARGET_WRITE_FP (val);
+#else
+  write_register (FP_REGNUM, val);
+#endif
+}
+
+/* Will calling read_var_value or locate_var_value on SYM end
+   up caring what frame it is being evaluated relative to?  SYM must
+   be non-NULL.  */
+int
+symbol_read_needs_frame (sym)
+     struct symbol *sym;
+{
+  switch (SYMBOL_CLASS (sym))
+    {
+      /* All cases listed explicitly so that gcc -Wall will detect it if
+	 we failed to consider one.  */
+    case LOC_REGISTER:
+    case LOC_ARG:
+    case LOC_REF_ARG:
+    case LOC_REGPARM:
+    case LOC_REGPARM_ADDR:
+    case LOC_LOCAL:
+    case LOC_LOCAL_ARG:
+    case LOC_BASEREG:
+    case LOC_BASEREG_ARG:
+    case LOC_THREAD_LOCAL_STATIC:
+      return 1;
+
+    case LOC_UNDEF:
+    case LOC_CONST:
+    case LOC_STATIC:
+    case LOC_INDIRECT:
+    case LOC_TYPEDEF:
+
+    case LOC_LABEL:
+      /* Getting the address of a label can be done independently of the block,
+	 even if some *uses* of that address wouldn't work so well without
+	 the right frame.  */
+
+    case LOC_BLOCK:
+    case LOC_CONST_BYTES:
+    case LOC_UNRESOLVED:
+    case LOC_OPTIMIZED_OUT:
+      return 0;
+    }
+  return 1;
+}
+
+/* Given a struct symbol for a variable,
+   and a stack frame id, read the value of the variable
+   and return a (pointer to a) struct value containing the value. 
+   If the variable cannot be found, return a zero pointer.
+   If FRAME is NULL, use the selected_frame.  */
+
+value_ptr
+read_var_value (var, frame)
+     register struct symbol *var;
+     struct frame_info *frame;
+{
+  register value_ptr v;
+  struct type *type = SYMBOL_TYPE (var);
+  CORE_ADDR addr;
+  register int len;
+
+  v = allocate_value (type);
+  VALUE_LVAL (v) = lval_memory;	/* The most likely possibility.  */
+  VALUE_BFD_SECTION (v) = SYMBOL_BFD_SECTION (var);
+
+  len = TYPE_LENGTH (type);
+
+  if (frame == NULL) frame = selected_frame;
+
+  switch (SYMBOL_CLASS (var))
+    {
+    case LOC_CONST:
+      /* Put the constant back in target format.  */
+      store_signed_integer (VALUE_CONTENTS_RAW (v), len,
+			    (LONGEST) SYMBOL_VALUE (var));
+      VALUE_LVAL (v) = not_lval;
+      return v;
+
+    case LOC_LABEL:
+      /* Put the constant back in target format.  */
+      if (overlay_debugging)
+	store_address (VALUE_CONTENTS_RAW (v), len, 
+		       (LONGEST)symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
+							   SYMBOL_BFD_SECTION (var)));
+      else
+	store_address (VALUE_CONTENTS_RAW (v), len,
+		       (LONGEST)SYMBOL_VALUE_ADDRESS (var));
+      VALUE_LVAL (v) = not_lval;
+      return v;
+
+    case LOC_CONST_BYTES:
+      {
+	char *bytes_addr;
+	bytes_addr = SYMBOL_VALUE_BYTES (var);
+	memcpy (VALUE_CONTENTS_RAW (v), bytes_addr, len);
+	VALUE_LVAL (v) = not_lval;
+	return v;
+      }
+
+    case LOC_STATIC:
+      if (overlay_debugging)
+	addr = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (var),
+					 SYMBOL_BFD_SECTION (var));
+      else
+	addr = SYMBOL_VALUE_ADDRESS (var);
+      break;
+
+    case LOC_INDIRECT:
+      /* The import slot does not have a real address in it from the
+         dynamic loader (dld.sl on HP-UX), if the target hasn't begun
+         execution yet, so check for that. */ 
+      if (!target_has_execution)
+        error ("\
+Attempt to access variable defined in different shared object or load module when\n\
+addresses have not been bound by the dynamic loader. Try again when executable is running.");
+      
+      addr = SYMBOL_VALUE_ADDRESS (var);
+      addr = read_memory_unsigned_integer
+	(addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+      break;
+
+    case LOC_ARG:
+      if (frame == NULL)
+	return 0;
+      addr = FRAME_ARGS_ADDRESS (frame);
+      if (!addr)
+	return 0;
+      addr += SYMBOL_VALUE (var);
+      break;
+
+    case LOC_REF_ARG:
+      if (frame == NULL)
+	return 0;
+      addr = FRAME_ARGS_ADDRESS (frame);
+      if (!addr)
+	return 0;
+      addr += SYMBOL_VALUE (var);
+      addr = read_memory_unsigned_integer
+	(addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+      break;
+
+    case LOC_LOCAL:
+    case LOC_LOCAL_ARG:
+      if (frame == NULL)
+	return 0;
+      addr = FRAME_LOCALS_ADDRESS (frame);
+      addr += SYMBOL_VALUE (var);
+      break;
+
+    case LOC_BASEREG:
+    case LOC_BASEREG_ARG:
+      {
+	char buf[MAX_REGISTER_RAW_SIZE];
+	get_saved_register (buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
+			    NULL);
+	addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
+	addr += SYMBOL_VALUE (var);
+	break;
+      }
+			    
+    case LOC_THREAD_LOCAL_STATIC:
+      {
+        char buf[MAX_REGISTER_RAW_SIZE];
+        
+        get_saved_register(buf, NULL, NULL, frame, SYMBOL_BASEREG (var),
+			    NULL);
+        addr = extract_address (buf, REGISTER_RAW_SIZE (SYMBOL_BASEREG (var)));
+        addr += SYMBOL_VALUE (var );
+        break;
+      }
+      
+    case LOC_TYPEDEF:
+      error ("Cannot look up value of a typedef");
+      break;
+
+    case LOC_BLOCK:
+      if (overlay_debugging)
+	VALUE_ADDRESS (v) = symbol_overlayed_address 
+	  (BLOCK_START (SYMBOL_BLOCK_VALUE (var)), SYMBOL_BFD_SECTION (var));
+      else
+	VALUE_ADDRESS (v) = BLOCK_START (SYMBOL_BLOCK_VALUE (var));
+      return v;
+
+    case LOC_REGISTER:
+    case LOC_REGPARM:
+    case LOC_REGPARM_ADDR:
+      {
+	struct block *b;
+	int regno = SYMBOL_VALUE (var);
+	value_ptr regval;
+
+	if (frame == NULL)
+	  return 0;
+	b = get_frame_block (frame);
+
+	if (SYMBOL_CLASS (var) == LOC_REGPARM_ADDR)
+	  {
+	    regval = value_from_register (lookup_pointer_type (type),
+					  regno, 
+					  frame);
+
+	    if (regval == NULL)
+	      error ("Value of register variable not available.");
+
+	    addr   = value_as_pointer (regval);
+	    VALUE_LVAL (v) = lval_memory;
+	  }
+	else
+	  {
+	    regval = value_from_register (type, regno, frame);
+
+	    if (regval == NULL)
+	      error ("Value of register variable not available.");
+	    return regval;
+	  }
+      }
+      break;
+
+    case LOC_UNRESOLVED:
+      {
+	struct minimal_symbol *msym;
+
+	msym = lookup_minimal_symbol (SYMBOL_NAME (var), NULL, NULL);
+	if (msym == NULL)
+	  return 0;
+	if (overlay_debugging)
+	  addr = symbol_overlayed_address (SYMBOL_VALUE_ADDRESS (msym),
+					   SYMBOL_BFD_SECTION (msym));
+	else
+	  addr = SYMBOL_VALUE_ADDRESS (msym);
+      }
+      break;
+
+    case LOC_OPTIMIZED_OUT:
+      VALUE_LVAL (v) = not_lval;
+      VALUE_OPTIMIZED_OUT (v) = 1;
+      return v;
+
+    default:
+      error ("Cannot look up value of a botched symbol.");
+      break;
+    }
+
+  VALUE_ADDRESS (v) = addr;
+  VALUE_LAZY (v) = 1;
+  return v;
+}
+
+/* Return a value of type TYPE, stored in register REGNUM, in frame
+   FRAME. 
+
+   NOTE: returns NULL if register value is not available.
+   Caller will check return value or die!  */
+
+value_ptr
+value_from_register (type, regnum, frame)
+     struct type *type;
+     int regnum;
+     struct frame_info *frame;
+{
+  char raw_buffer [MAX_REGISTER_RAW_SIZE];
+  CORE_ADDR addr;
+  int optim;
+  value_ptr v = allocate_value (type);
+  char *value_bytes = 0;
+  int value_bytes_copied = 0;
+  int num_storage_locs;
+  enum lval_type lval;
+  int len;
+
+  CHECK_TYPEDEF (type);
+  len = TYPE_LENGTH (type);
+
+  VALUE_REGNO (v) = regnum;
+
+  num_storage_locs = (len > REGISTER_VIRTUAL_SIZE (regnum) ?
+		      ((len - 1) / REGISTER_RAW_SIZE (regnum)) + 1 :
+		      1);
+
+  if (num_storage_locs > 1
+#ifdef GDB_TARGET_IS_H8500
+      || TYPE_CODE (type) == TYPE_CODE_PTR
+#endif
+      )
+    {
+      /* Value spread across multiple storage locations.  */
+      
+      int local_regnum;
+      int mem_stor = 0, reg_stor = 0;
+      int mem_tracking = 1;
+      CORE_ADDR last_addr = 0;
+      CORE_ADDR first_addr = 0;
+
+      value_bytes = (char *) alloca (len + MAX_REGISTER_RAW_SIZE);
+
+      /* Copy all of the data out, whereever it may be.  */
+
+#ifdef GDB_TARGET_IS_H8500
+/* This piece of hideosity is required because the H8500 treats registers
+   differently depending upon whether they are used as pointers or not.  As a
+   pointer, a register needs to have a page register tacked onto the front.
+   An alternate way to do this would be to have gcc output different register
+   numbers for the pointer & non-pointer form of the register.  But, it
+   doesn't, so we're stuck with this.  */
+
+      if (TYPE_CODE (type) == TYPE_CODE_PTR
+	  && len > 2)
+	{
+	  int page_regnum;
+
+	  switch (regnum)
+	    {
+	    case R0_REGNUM: case R1_REGNUM: case R2_REGNUM: case R3_REGNUM:
+	      page_regnum = SEG_D_REGNUM;
+	      break;
+	    case R4_REGNUM: case R5_REGNUM:
+	      page_regnum = SEG_E_REGNUM;
+	      break;
+	    case R6_REGNUM: case R7_REGNUM:
+	      page_regnum = SEG_T_REGNUM;
+	      break;
+	    }
+
+	  value_bytes[0] = 0;
+	  get_saved_register (value_bytes + 1,
+			      &optim,
+			      &addr,
+			      frame,
+			      page_regnum,
+			      &lval);
+
+	  if (register_valid[page_regnum] == -1)
+	    return NULL;	/* register value not available */
+
+	  if (lval == lval_register)
+	    reg_stor++;
+	  else
+	    mem_stor++;
+	  first_addr = addr;
+	  last_addr = addr;
+
+	  get_saved_register (value_bytes + 2,
+			      &optim,
+			      &addr,
+			      frame,
+			      regnum,
+			      &lval);
+
+	  if (register_valid[regnum] == -1)
+	    return NULL;	/* register value not available */
+
+	  if (lval == lval_register)
+	    reg_stor++;
+	  else
+	    {
+	      mem_stor++;
+	      mem_tracking = mem_tracking && (addr == last_addr);
+	    }
+	  last_addr = addr;
+	}
+      else
+#endif				/* GDB_TARGET_IS_H8500 */
+	for (local_regnum = regnum;
+	     value_bytes_copied < len;
+	     (value_bytes_copied += REGISTER_RAW_SIZE (local_regnum),
+	      ++local_regnum))
+	  {
+	    get_saved_register (value_bytes + value_bytes_copied,
+				&optim,
+				&addr,
+				frame,
+				local_regnum,
+				&lval);
+
+	  if (register_valid[local_regnum] == -1)
+	    return NULL;	/* register value not available */
+
+	    if (regnum == local_regnum)
+	      first_addr = addr;
+	    if (lval == lval_register)
+	      reg_stor++;
+	    else
+	      {
+		mem_stor++;
+	      
+		mem_tracking =
+		  (mem_tracking
+		   && (regnum == local_regnum
+		       || addr == last_addr));
+	      }
+	    last_addr = addr;
+	  }
+
+      if ((reg_stor && mem_stor)
+	  || (mem_stor && !mem_tracking))
+	/* Mixed storage; all of the hassle we just went through was
+	   for some good purpose.  */
+	{
+	  VALUE_LVAL (v) = lval_reg_frame_relative;
+	  VALUE_FRAME (v) = FRAME_FP (frame);
+	  VALUE_FRAME_REGNUM (v) = regnum;
+	}
+      else if (mem_stor)
+	{
+	  VALUE_LVAL (v) = lval_memory;
+	  VALUE_ADDRESS (v) = first_addr;
+	}
+      else if (reg_stor)
+	{
+	  VALUE_LVAL (v) = lval_register;
+	  VALUE_ADDRESS (v) = first_addr;
+	}
+      else
+	fatal ("value_from_register: Value not stored anywhere!");
+
+      VALUE_OPTIMIZED_OUT (v) = optim;
+
+      /* Any structure stored in more than one register will always be
+	 an integral number of registers.  Otherwise, you'd need to do
+	 some fiddling with the last register copied here for little
+	 endian machines.  */
+
+      /* Copy into the contents section of the value.  */
+      memcpy (VALUE_CONTENTS_RAW (v), value_bytes, len);
+
+      /* Finally do any conversion necessary when extracting this
+         type from more than one register.  */
+#ifdef REGISTER_CONVERT_TO_TYPE
+      REGISTER_CONVERT_TO_TYPE(regnum, type, VALUE_CONTENTS_RAW(v));
+#endif
+      return v;
+    }
+
+  /* Data is completely contained within a single register.  Locate the
+     register's contents in a real register or in core;
+     read the data in raw format.  */
+
+  get_saved_register (raw_buffer, &optim, &addr, frame, regnum, &lval);
+
+  if (register_valid[regnum] == -1)
+    return NULL;	/* register value not available */
+
+  VALUE_OPTIMIZED_OUT (v) = optim;
+  VALUE_LVAL (v) = lval;
+  VALUE_ADDRESS (v) = addr;
+
+  /* Convert raw data to virtual format if necessary.  */
+  
+#ifdef REGISTER_CONVERTIBLE
+  if (REGISTER_CONVERTIBLE (regnum))
+    {
+      REGISTER_CONVERT_TO_VIRTUAL (regnum, type,
+				   raw_buffer, VALUE_CONTENTS_RAW (v));
+    }
+  else
+#endif
+    {
+      /* Raw and virtual formats are the same for this register.  */
+
+      if (TARGET_BYTE_ORDER == BIG_ENDIAN && len < REGISTER_RAW_SIZE (regnum))
+	{
+  	  /* Big-endian, and we want less than full size.  */
+	  VALUE_OFFSET (v) = REGISTER_RAW_SIZE (regnum) - len;
+	}
+
+      memcpy (VALUE_CONTENTS_RAW (v), raw_buffer + VALUE_OFFSET (v), len);
+    }
+  
+  return v;
+}
+
+/* Given a struct symbol for a variable or function,
+   and a stack frame id, 
+   return a (pointer to a) struct value containing the properly typed
+   address.  */
+
+value_ptr
+locate_var_value (var, frame)
+     register struct symbol *var;
+     struct frame_info *frame;
+{
+  CORE_ADDR addr = 0;
+  struct type *type = SYMBOL_TYPE (var);
+  value_ptr lazy_value;
+
+  /* Evaluate it first; if the result is a memory address, we're fine.
+     Lazy evaluation pays off here. */
+
+  lazy_value = read_var_value (var, frame);
+  if (lazy_value == 0)
+    error ("Address of \"%s\" is unknown.", SYMBOL_SOURCE_NAME (var));
+
+  if (VALUE_LAZY (lazy_value)
+      || TYPE_CODE (type) == TYPE_CODE_FUNC)
+    {
+      value_ptr val;
+
+      addr = VALUE_ADDRESS (lazy_value);
+      val =  value_from_longest (lookup_pointer_type (type), (LONGEST) addr);
+      VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (lazy_value);
+      return val;
+    }
+
+  /* Not a memory address; check what the problem was.  */
+  switch (VALUE_LVAL (lazy_value)) 
+    {
+    case lval_register:
+    case lval_reg_frame_relative:
+      error ("Address requested for identifier \"%s\" which is in a register.",
+	     SYMBOL_SOURCE_NAME (var));
+      break;
+
+    default:
+      error ("Can't take address of \"%s\" which isn't an lvalue.",
+	     SYMBOL_SOURCE_NAME (var));
+      break;
+    }
+  return 0;  /* For lint -- never reached */
+}
diff --git a/gdb/fork-child.c b/gdb/fork-child.c
new file mode 100644
index 0000000..f3504bc
--- /dev/null
+++ b/gdb/fork-child.c
@@ -0,0 +1,616 @@
+/* Fork a Unix child process, and set up to debug it, for GDB.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1996 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"		/* required by inferior.h */
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "terminal.h"
+#include "gdbthread.h"
+
+#include <signal.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#define DEBUGGING 0
+
+/* This just gets used as a default if we can't find SHELL */
+#ifndef SHELL_FILE
+#define SHELL_FILE "/bin/sh"
+#endif
+
+extern char **environ;
+
+/* This function breaks up an argument string into an argument
+ * vector suitable for passing to execvp().
+ * E.g., on "run a b c d" this routine would get as input
+ * the string "a b c d", and as output it would fill in argv with
+ * the four arguments "a", "b", "c", "d".
+ */
+static void
+breakup_args (
+	       scratch,
+	       argv)
+     char *scratch;
+     char **argv;
+{
+  char *cp = scratch;
+
+#if DEBUGGING
+  printf ("breakup_args: input = %s\n", scratch);
+#endif
+  for (;;)
+    {
+
+      /* Scan past leading separators */
+      while (*cp == ' ' || *cp == '\t' || *cp == '\n')
+	{
+	  cp++;
+	}
+
+      /* Break if at end of string */
+      if (*cp == '\0')
+	break;
+
+      /* Take an arg */
+      *argv++ = cp;
+
+      /* Scan for next arg separator */
+      cp = strchr (cp, ' ');
+      if (cp == NULL)
+	cp = strchr (cp, '\t');
+      if (cp == NULL)
+	cp = strchr (cp, '\n');
+
+      /* No separators => end of string => break */
+      if (cp == NULL)
+	break;
+
+      /* Replace the separator with a terminator */
+      *cp++ = '\0';
+    }
+
+  /* execv requires a null-terminated arg vector */
+  *argv = NULL;
+
+}
+
+
+/* Start an inferior Unix child process and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  SHELL_FILE is the shell file,
+   or NULL if we should pick one.  Errors reported with error().  */
+
+void
+fork_inferior (exec_file, allargs, env, traceme_fun, init_trace_fun,
+	       pre_trace_fun, shell_file)
+     char *exec_file;
+     char *allargs;
+     char **env;
+     void (*traceme_fun) PARAMS ((void));
+     void (*init_trace_fun) PARAMS ((int));
+     void (*pre_trace_fun) PARAMS ((void));
+     char *shell_file;
+{
+  int pid;
+  char *shell_command;
+  static char default_shell_file[] = SHELL_FILE;
+  int len;
+  /* Set debug_fork then attach to the child while it sleeps, to debug. */
+  static int debug_fork = 0;
+  /* This is set to the result of setpgrp, which if vforked, will be visible
+     to you in the parent process.  It's only used by humans for debugging.  */
+  static int debug_setpgrp = 657473;
+  char **save_our_env;
+  int shell = 0;
+  char **argv;
+  char *tryname;
+
+  /* If no exec file handed to us, get it from the exec-file command -- with
+     a good, common error message if none is specified.  */
+  if (exec_file == 0)
+    exec_file = get_exec_file (1);
+
+  /* STARTUP_WITH_SHELL is defined in inferior.h.
+   * If 0, we'll just do a fork/exec, no shell, so don't
+   * bother figuring out what shell.
+   */
+  if (STARTUP_WITH_SHELL)
+    {
+      /* Figure out what shell to start up the user program under. */
+      if (shell_file == NULL)
+	shell_file = getenv ("SHELL");
+      if (shell_file == NULL)
+	shell_file = default_shell_file;
+      shell = 1;
+    }
+
+#if DEBUGGING
+  printf ("shell is %s\n", shell_file);
+#endif
+
+  /* Multiplying the length of exec_file by 4 is to account for the fact
+     that it may expand when quoted; it is a worst-case number based on
+     every character being '.  */
+  len = 5 + 4 * strlen (exec_file) + 1 + strlen (allargs) + 1 + /*slop*/ 12;
+  /* If desired, concat something onto the front of ALLARGS.
+     SHELL_COMMAND is the result.  */
+#ifdef SHELL_COMMAND_CONCAT
+  shell_command = (char *) alloca (strlen (SHELL_COMMAND_CONCAT) + len);
+  strcpy (shell_command, SHELL_COMMAND_CONCAT);
+#else
+  shell_command = (char *) alloca (len);
+  shell_command[0] = '\0';
+#endif
+
+  if (!shell)
+    {
+      /* We're going to call execvp. Create argv */
+      /* Largest case: every other character is a separate arg */
+#if DEBUGGING
+      printf ("allocating argv, length = %d\n",
+	      (
+		(strlen (allargs) + 1) / (unsigned) 2
+		+ 2
+	      ) * sizeof (*argv)
+	);
+#endif
+      argv = (char **) xmalloc (((strlen (allargs) + 1) / (unsigned) 2 + 2) * sizeof (*argv));
+      argv[0] = exec_file;
+      breakup_args (allargs, &argv[1]);
+
+    }
+  else
+    {
+
+      /* We're going to call a shell */
+
+      /* Now add exec_file, quoting as necessary.  */
+
+      char *p;
+      int need_to_quote;
+
+      strcat (shell_command, "exec ");
+
+      /* Quoting in this style is said to work with all shells.  But csh
+       on IRIX 4.0.1 can't deal with it.  So we only quote it if we need
+       to.  */
+      p = exec_file;
+      while (1)
+	{
+	  switch (*p)
+	    {
+	    case '\'':
+	    case '"':
+	    case '(':
+	    case ')':
+	    case '$':
+	    case '&':
+	    case ';':
+	    case '<':
+	    case '>':
+	    case ' ':
+	    case '\n':
+	    case '\t':
+	      need_to_quote = 1;
+	      goto end_scan;
+
+	    case '\0':
+	      need_to_quote = 0;
+	      goto end_scan;
+
+	    default:
+	      break;
+	    }
+	  ++p;
+	}
+    end_scan:
+      if (need_to_quote)
+	{
+	  strcat (shell_command, "'");
+	  for (p = exec_file; *p != '\0'; ++p)
+	    {
+	      if (*p == '\'')
+		strcat (shell_command, "'\\''");
+	      else
+		strncat (shell_command, p, 1);
+	    }
+	  strcat (shell_command, "'");
+	}
+      else
+	strcat (shell_command, exec_file);
+
+      strcat (shell_command, " ");
+      strcat (shell_command, allargs);
+
+    }
+
+  /* exec is said to fail if the executable is open.  */
+  close_exec_file ();
+
+  /* Retain a copy of our environment variables, since the child will
+     replace the value of  environ  and if we're vforked, we have to
+     restore it.  */
+  save_our_env = environ;
+
+  /* Tell the terminal handling subsystem what tty we plan to run on;
+     it will just record the information for later.  */
+
+  new_tty_prefork (inferior_io_terminal);
+
+  /* It is generally good practice to flush any possible pending stdio
+     output prior to doing a fork, to avoid the possibility of both the
+     parent and child flushing the same data after the fork. */
+
+  gdb_flush (gdb_stdout);
+  gdb_flush (gdb_stderr);
+
+  /* If there's any initialization of the target layers that must happen
+   to prepare to handle the child we're about fork, do it now...
+   */
+  if (pre_trace_fun != NULL)
+    (*pre_trace_fun) ();
+
+#if defined(USG) && !defined(HAVE_VFORK)
+  pid = fork ();
+#else
+  if (debug_fork)
+    pid = fork ();
+  else
+    pid = vfork ();
+#endif
+
+  if (pid < 0)
+    perror_with_name ("vfork");
+
+  if (pid == 0)
+    {
+      if (debug_fork)
+	sleep (debug_fork);
+
+      /* Run inferior in a separate process group.  */
+      debug_setpgrp = gdb_setpgid ();
+      if (debug_setpgrp == -1)
+	perror ("setpgrp failed in child");
+
+      /* Ask the tty subsystem to switch to the one we specified earlier
+	 (or to share the current terminal, if none was specified).  */
+
+      new_tty ();
+
+      /* Changing the signal handlers for the inferior after
+	 a vfork can also change them for the superior, so we don't mess
+	 with signals here.  See comments in
+	 initialize_signals for how we get the right signal handlers
+	 for the inferior.  */
+
+      /* "Trace me, Dr. Memory!" */
+      (*traceme_fun) ();
+      /* The call above set this process (the "child") as debuggable
+       * by the original gdb process (the "parent").  Since processes
+       * (unlike people) can have only one parent, if you are
+       * debugging gdb itself (and your debugger is thus _already_ the
+       * controller/parent for this child),  code from here on out
+       * is undebuggable.  Indeed, you probably got an error message
+       * saying "not parent".  Sorry--you'll have to use print statements!
+       */
+
+      /* There is no execlpe call, so we have to set the environment
+	 for our child in the global variable.  If we've vforked, this
+	 clobbers the parent, but environ is restored a few lines down
+	 in the parent.  By the way, yes we do need to look down the
+	 path to find $SHELL.  Rich Pixley says so, and I agree.  */
+      environ = env;
+
+      /* If we decided above to start up with a shell,
+       * we exec the shell,
+       * "-c" says to interpret the next arg as a shell command
+       * to execute, and this command is "exec <target-program> <args>".
+       * "-f" means "fast startup" to the c-shell, which means
+       * don't do .cshrc file. Doing .cshrc may cause fork/exec
+       * events which will confuse debugger start-up code.
+       */
+      if (shell)
+	{
+#if 0
+
+	  /* HP change is problematic. The -f option has different meanings
+	   for different shells. It is particularly inappropriate for
+	   bourne shells. */
+	  execlp (shell_file, shell_file, "-f", "-c", shell_command, (char *) 0);
+#else
+	  execlp (shell_file, shell_file, "-c", shell_command, (char *) 0);
+#endif
+
+
+	  /* If we get here, it's an error */
+	  fprintf_unfiltered (gdb_stderr, "Cannot exec %s: %s.\n", shell_file,
+			      safe_strerror (errno));
+	  gdb_flush (gdb_stderr);
+	  _exit (0177);
+	}
+      else
+	{
+	  /* Otherwise, we directly exec the target program with execvp. */
+	  int i;
+	  char *errstring;
+#if DEBUGGING
+	  printf ("about to exec target, exec_file = %s\n", exec_file);
+	  i = 0;
+	  while (argv[i] != NULL)
+	    {
+	      printf ("strlen(argv[%d]) is %d\n", i, strlen (argv[i]));
+	      printf ("argv[%d] is %s\n", i, argv[i]);
+	      i++;
+	    }
+#endif
+	  execvp (exec_file, argv);
+
+	  /* If we get here, it's an error */
+	  errstring = safe_strerror (errno);
+	  fprintf_unfiltered (gdb_stderr, "Cannot exec %s ", exec_file);
+
+	  i = 1;
+	  while (argv[i] != NULL)
+	    {
+	      if (i != 1)
+		fprintf_unfiltered (gdb_stderr, " ");
+	      fprintf_unfiltered (gdb_stderr, "%s", argv[i]);
+	      i++;
+	    }
+	  fprintf_unfiltered (gdb_stderr, ".\n");
+	  /* This extra info seems to be useless
+        fprintf_unfiltered (gdb_stderr, "Got error %s.\n", errstring);
+         */
+	  gdb_flush (gdb_stderr);
+	  _exit (0177);
+	}
+    }
+
+  /* Restore our environment in case a vforked child clob'd it.  */
+  environ = save_our_env;
+
+  init_thread_list ();
+
+  inferior_pid = pid;		/* Needed for wait_for_inferior stuff below */
+
+  /* Now that we have a child process, make it our target, and
+     initialize anything target-vector-specific that needs initializing.  */
+
+  (*init_trace_fun) (pid);
+
+  /* We are now in the child process of interest, having exec'd the
+     correct program, and are poised at the first instruction of the
+     new program.  */
+
+  /* Allow target dependant code to play with the new process.  This might be
+     used to have target-specific code initialize a variable in the new process
+     prior to executing the first instruction.  */
+  TARGET_CREATE_INFERIOR_HOOK (pid);
+
+#ifdef SOLIB_CREATE_INFERIOR_HOOK
+  SOLIB_CREATE_INFERIOR_HOOK (pid);
+#endif
+}
+
+/* An inferior Unix process CHILD_PID has been created by a call to
+   fork() (or variants like vfork).  It is presently stopped, and waiting
+   to be resumed.  clone_and_follow_inferior will fork the debugger,
+   and that clone will "follow" (attach to) CHILD_PID.  The original copy
+   of the debugger will not touch CHILD_PID again.
+
+   Also, the original debugger will set FOLLOWED_CHILD FALSE, while the
+   clone will set it TRUE.
+   */
+void
+clone_and_follow_inferior (child_pid, followed_child)
+     int child_pid;
+     int *followed_child;
+{
+  extern int auto_solib_add;
+
+  int debugger_pid;
+  int status;
+  char pid_spelling[100];	/* Arbitrary but sufficient length. */
+
+  /* This semaphore is used to coordinate the two debuggers' handoff
+     of CHILD_PID.  The original debugger will detach from CHILD_PID,
+     and then the clone debugger will attach to it.  (It must be done
+     this way because on some targets, only one process at a time can
+     trace another.  Thus, the original debugger must relinquish its
+     tracing rights before the clone can pick them up.)
+     */
+#define SEM_TALK (1)
+#define SEM_LISTEN (0)
+  int handoff_semaphore[2];	/* Original "talks" to [1], clone "listens" to [0] */
+  int talk_value = 99;
+  int listen_value;
+
+  /* Set debug_fork then attach to the child while it sleeps, to debug. */
+  static int debug_fork = 0;
+
+  /* It is generally good practice to flush any possible pending stdio
+     output prior to doing a fork, to avoid the possibility of both the
+     parent and child flushing the same data after the fork. */
+
+  gdb_flush (gdb_stdout);
+  gdb_flush (gdb_stderr);
+
+  /* Open the semaphore pipes.
+     */
+  status = pipe (handoff_semaphore);
+  if (status < 0)
+    error ("error getting pipe for handoff semaphore");
+
+  /* Clone the debugger. */
+#if defined(USG) && !defined(HAVE_VFORK)
+  debugger_pid = fork ();
+#else
+  if (debug_fork)
+    debugger_pid = fork ();
+  else
+    debugger_pid = vfork ();
+#endif
+
+  if (debugger_pid < 0)
+    perror_with_name ("fork");
+
+  /* Are we the original debugger?  If so, we must relinquish all claims
+   to CHILD_PID. */
+  if (debugger_pid != 0)
+    {
+      char signal_spelling[100];/* Arbitrary but sufficient length */
+
+      /* Detach from CHILD_PID.  Deliver a "stop" signal when we do, though,
+       so that it remains stopped until the clone debugger can attach
+       to it.
+       */
+      detach_breakpoints (child_pid);
+
+      sprintf (signal_spelling, "%d", target_signal_to_host (TARGET_SIGNAL_STOP));
+      target_require_detach (child_pid, signal_spelling, 1);
+
+      /* Notify the clone debugger that it should attach to CHILD_PID. */
+      write (handoff_semaphore[SEM_TALK], &talk_value, sizeof (talk_value));
+
+      *followed_child = 0;
+    }
+
+  /* We're the child. */
+  else
+    {
+      if (debug_fork)
+	sleep (debug_fork);
+
+      /* The child (i.e., the cloned debugger) must now attach to
+         CHILD_PID.  inferior_pid is presently set to the parent process
+         of the fork, while CHILD_PID should be the child process of the
+         fork.
+
+         Wait until the original debugger relinquishes control of CHILD_PID,
+         though.
+         */
+      read (handoff_semaphore[SEM_LISTEN], &listen_value, sizeof (listen_value));
+
+      /* Note that we DON'T want to actually detach from inferior_pid,
+         because that would allow it to run free.  The original
+         debugger wants to retain control of the process.  So, we
+         just reset inferior_pid to CHILD_PID, and then ensure that all
+         breakpoints are really set in CHILD_PID.
+         */
+      target_mourn_inferior ();
+
+      /* Ask the tty subsystem to switch to the one we specified earlier
+         (or to share the current terminal, if none was specified).  */
+
+      new_tty ();
+
+      dont_repeat ();
+      sprintf (pid_spelling, "%d", child_pid);
+      target_require_attach (pid_spelling, 1);
+
+      /* Perform any necessary cleanup, after attachment.  (This form
+         of attaching can behave differently on some targets than the
+         standard method, where a process formerly not under debugger
+         control was suddenly attached to..)
+         */
+      target_post_follow_inferior_by_clone ();
+
+      *followed_child = 1;
+    }
+
+  /* Discard the handoff sempahore. */
+  (void) close (handoff_semaphore[SEM_LISTEN]);
+  (void) close (handoff_semaphore[SEM_TALK]);
+}
+
+/* Accept NTRAPS traps from the inferior.  */
+
+void
+startup_inferior (ntraps)
+     int ntraps;
+{
+  int pending_execs = ntraps;
+  int terminal_initted;
+
+  /* The process was started by the fork that created it,
+     but it will have stopped one instruction after execing the shell.
+     Here we must get it up to actual execution of the real program.  */
+
+  clear_proceed_status ();
+
+  init_wait_for_inferior ();
+
+  terminal_initted = 0;
+
+  if (STARTUP_WITH_SHELL)
+    inferior_ignoring_startup_exec_events = ntraps;
+  else
+    inferior_ignoring_startup_exec_events = 0;
+  inferior_ignoring_leading_exec_events =
+    target_reported_exec_events_per_exec_call () - 1;
+
+#ifdef STARTUP_INFERIOR
+  STARTUP_INFERIOR (pending_execs);
+#else
+  while (1)
+    {
+      stop_soon_quietly = 1;	/* Make wait_for_inferior be quiet */
+      wait_for_inferior ();
+      if (stop_signal != TARGET_SIGNAL_TRAP)
+	{
+	  /* Let shell child handle its own signals in its own way */
+	  /* FIXME, what if child has exit()ed?  Must exit loop somehow */
+	  resume (0, stop_signal);
+	}
+      else
+	{
+	  /* We handle SIGTRAP, however; it means child did an exec.  */
+	  if (!terminal_initted)
+	    {
+	      /* Now that the child has exec'd we know it has already set its
+		 process group.  On POSIX systems, tcsetpgrp will fail with
+		 EPERM if we try it before the child's setpgid.  */
+
+	      /* Set up the "saved terminal modes" of the inferior
+		 based on what modes we are starting it with.  */
+	      target_terminal_init ();
+
+	      /* Install inferior's terminal modes.  */
+	      target_terminal_inferior ();
+
+	      terminal_initted = 1;
+	    }
+
+	  pending_execs = pending_execs - 1;
+	  if (0 == pending_execs)
+	    break;
+
+	  resume (0, TARGET_SIGNAL_0);	/* Just make it go on */
+	}
+    }
+#endif /* STARTUP_INFERIOR */
+  stop_soon_quietly = 0;
+}
diff --git a/gdb/fr30-tdep.c b/gdb/fr30-tdep.c
new file mode 100644
index 0000000..0d442da
--- /dev/null
+++ b/gdb/fr30-tdep.c
@@ -0,0 +1,552 @@
+/* Target-dependent code for the Fujitsu FR30.
+   Copyright 1999, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+#include "symfile.h"
+
+/* Function: pop_frame
+   This routine gets called when either the user uses the `return'
+   command, or the call dummy breakpoint gets hit.  */
+
+void
+fr30_pop_frame ()
+{
+  struct frame_info *frame = get_current_frame();
+  int regnum;
+  CORE_ADDR sp = read_register(SP_REGNUM);
+
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    {
+      write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+
+      for (regnum = 0; regnum < NUM_REGS; regnum++)
+	if (frame->fsr.regs[regnum] != 0) {
+	  write_register (regnum,
+		  read_memory_unsigned_integer (frame->fsr.regs[regnum],
+			REGISTER_RAW_SIZE(regnum)));
+	}
+      write_register (SP_REGNUM, sp + frame->framesize);
+    }
+  flush_cached_frames ();
+}
+
+/* Function: skip_prologue
+   Return the address of the first code past the prologue of the function.  */
+
+CORE_ADDR
+fr30_skip_prologue(CORE_ADDR pc)
+{
+  CORE_ADDR func_addr, func_end;
+
+  /* See what the symbol table says */
+
+  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    {
+      struct symtab_and_line sal;
+
+      sal = find_pc_line (func_addr, 0);
+
+      if (sal.line != 0 && sal.end < func_end) {
+	return sal.end;
+	}
+    }
+
+/* Either we didn't find the start of this function (nothing we can do),
+   or there's no line info, or the line after the prologue is after
+   the end of the function (there probably isn't a prologue). */
+
+  return pc;
+}
+
+
+/* Function: push_arguments
+   Setup arguments and RP for a call to the target.  First four args
+   go in FIRST_ARGREG -> LAST_ARGREG, subsequent args go on stack...
+   Structs are passed by reference.  XXX not right now Z.R.
+   64 bit quantities (doubles and long longs) may be split between
+   the regs and the stack.
+   When calling a function that returns a struct, a pointer to the struct
+   is passed in as a secret first argument (always in FIRST_ARGREG).
+
+   Stack space for the args has NOT been allocated: that job is up to us.
+*/
+
+CORE_ADDR
+fr30_push_arguments(nargs, args, sp, struct_return, struct_addr)
+     int         nargs;
+     value_ptr * args;
+     CORE_ADDR   sp;
+     int         struct_return;
+     CORE_ADDR   struct_addr;
+{
+  int argreg;
+  int argnum;
+  int stack_offset;
+  struct stack_arg {
+      char *val;
+      int len;
+      int offset;
+    };
+  struct stack_arg *stack_args =
+      (struct stack_arg*)alloca (nargs * sizeof (struct stack_arg));
+  int nstack_args = 0;
+
+  argreg = FIRST_ARGREG;
+
+  /* the struct_return pointer occupies the first parameter-passing reg */
+  if (struct_return)
+      write_register (argreg++, struct_addr);
+
+  stack_offset = 0;
+
+  /* Process args from left to right.  Store as many as allowed in
+	registers, save the rest to be pushed on the stack */
+  for(argnum = 0; argnum < nargs; argnum++)
+    {
+      char *         val;
+      value_ptr      arg = args[argnum];
+      struct type *  arg_type = check_typedef (VALUE_TYPE (arg));
+      struct type *  target_type = TYPE_TARGET_TYPE (arg_type);
+      int            len = TYPE_LENGTH (arg_type);
+      enum type_code typecode = TYPE_CODE (arg_type);
+      CORE_ADDR      regval;
+      int newarg;
+
+      val = (char *) VALUE_CONTENTS (arg);
+
+	{
+	  /* Copy the argument to general registers or the stack in
+	     register-sized pieces.  Large arguments are split between
+	     registers and stack.  */
+	  while (len > 0)
+	    {
+	      if (argreg <= LAST_ARGREG)
+		{
+	          int partial_len = len < REGISTER_SIZE ? len : REGISTER_SIZE;
+		  regval = extract_address (val, partial_len);
+
+		  /* It's a simple argument being passed in a general
+		     register.  */
+		  write_register (argreg, regval);
+		  argreg++;
+	          len -= partial_len;
+	          val += partial_len;
+		}
+	      else
+		{
+		  /* keep for later pushing */
+		  stack_args[nstack_args].val = val;
+		  stack_args[nstack_args++].len = len;
+		  break;
+		}
+	    }
+	}
+    }
+    /* now do the real stack pushing, process args right to left */
+    while(nstack_args--)
+      {
+	sp -= stack_args[nstack_args].len;
+	write_memory(sp, stack_args[nstack_args].val,
+		stack_args[nstack_args].len);
+      }
+
+  /* Return adjusted stack pointer.  */
+  return sp;
+}
+
+_initialize_fr30_tdep()
+{
+	extern int print_insn_fr30(bfd_vma, disassemble_info *);
+
+	tm_print_insn = print_insn_fr30;
+}
+
+/* Function: check_prologue_cache
+   Check if prologue for this frame's PC has already been scanned.
+   If it has, copy the relevant information about that prologue and
+   return non-zero.  Otherwise do not copy anything and return zero.
+
+   The information saved in the cache includes:
+     * the frame register number;
+     * the size of the stack frame;
+     * the offsets of saved regs (relative to the old SP); and
+     * the offset from the stack pointer to the frame pointer
+
+   The cache contains only one entry, since this is adequate
+   for the typical sequence of prologue scan requests we get.
+   When performing a backtrace, GDB will usually ask to scan
+   the same function twice in a row (once to get the frame chain,
+   and once to fill in the extra frame information).
+*/
+
+static struct frame_info prologue_cache;
+
+static int
+check_prologue_cache (fi)
+     struct frame_info * fi;
+{
+  int i;
+
+  if (fi->pc == prologue_cache.pc)
+    {
+      fi->framereg = prologue_cache.framereg;
+      fi->framesize = prologue_cache.framesize;
+      fi->frameoffset = prologue_cache.frameoffset;
+      for (i = 0; i <= NUM_REGS; i++)
+	fi->fsr.regs[i] = prologue_cache.fsr.regs[i];
+      return 1;
+    }
+  else
+    return 0;
+}
+
+
+/* Function: save_prologue_cache
+   Copy the prologue information from fi to the prologue cache.
+*/
+
+static void
+save_prologue_cache (fi)
+     struct frame_info * fi;
+{
+  int i;
+
+  prologue_cache.pc          = fi->pc;
+  prologue_cache.framereg    = fi->framereg;
+  prologue_cache.framesize   = fi->framesize;
+  prologue_cache.frameoffset = fi->frameoffset;
+  
+  for (i = 0; i <= NUM_REGS; i++) {
+    prologue_cache.fsr.regs[i] = fi->fsr.regs[i];
+  }
+}
+
+
+/* Function: scan_prologue
+   Scan the prologue of the function that contains PC, and record what
+   we find in PI.  PI->fsr must be zeroed by the called.  Returns the
+   pc after the prologue.  Note that the addresses saved in pi->fsr
+   are actually just frame relative (negative offsets from the frame
+   pointer).  This is because we don't know the actual value of the
+   frame pointer yet.  In some circumstances, the frame pointer can't
+   be determined till after we have scanned the prologue.  */
+
+static void
+fr30_scan_prologue (fi)
+     struct frame_info * fi;
+{
+  int sp_offset, fp_offset;
+  CORE_ADDR prologue_start, prologue_end, current_pc;
+
+  /* Check if this function is already in the cache of frame information. */
+  if (check_prologue_cache (fi))
+    return;
+
+  /* Assume there is no frame until proven otherwise.  */
+  fi->framereg    = SP_REGNUM;
+  fi->framesize   = 0;
+  fi->frameoffset = 0;
+
+  /* Find the function prologue.  If we can't find the function in
+     the symbol table, peek in the stack frame to find the PC.  */
+  if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end))
+    {
+      /* Assume the prologue is everything between the first instruction
+         in the function and the first source line.  */
+      struct symtab_and_line sal = find_pc_line (prologue_start, 0);
+
+      if (sal.line == 0)		/* no line info, use current PC */
+	prologue_end = fi->pc;
+      else if (sal.end < prologue_end)	/* next line begins after fn end */
+	prologue_end = sal.end;		/* (probably means no prologue)  */
+    }
+  else
+    {
+      /* XXX Z.R. What now??? The following is entirely bogus */
+      prologue_start = (read_memory_integer (fi->frame, 4) & 0x03fffffc) - 12;
+      prologue_end = prologue_start + 40;
+    }
+
+  /* Now search the prologue looking for instructions that set up the
+     frame pointer, adjust the stack pointer, and save registers.  */
+
+  sp_offset = fp_offset = 0;
+  for (current_pc = prologue_start; current_pc < prologue_end; current_pc += 2)
+    {
+      unsigned int insn;
+
+      insn = read_memory_unsigned_integer (current_pc, 2);
+
+      if ((insn & 0xfe00) == 0x8e00)			/* stm0 or stm1 */
+	{
+	  int reg, mask = insn & 0xff;
+
+	  /* scan in one sweep - create virtual 16-bit mask from either insn's mask */
+          if((insn & 0x0100) == 0)
+	    {
+	      mask <<= 8;  /* stm0 - move to upper byte in virtual mask */
+	    }
+
+	  /* Calculate offsets of saved registers (to be turned later into addresses). */
+	  for (reg = R4_REGNUM; reg <= R11_REGNUM; reg++)
+	    if (mask & (1 << (15 - reg)))
+	      {
+		sp_offset -= 4;
+		fi->fsr.regs[reg] = sp_offset;
+	      }
+	}
+      else if((insn & 0xfff0) == 0x1700)		/* st rx,@-r15 */
+        {
+	  int reg = insn & 0xf;
+
+	  sp_offset -= 4;
+	  fi->fsr.regs[reg] = sp_offset;
+	}
+      else if((insn & 0xff00) == 0x0f00)		/* enter */
+        {
+	  fp_offset = fi->fsr.regs[FP_REGNUM] = sp_offset - 4;
+	  sp_offset -= 4 * (insn & 0xff);
+	  fi->framereg = FP_REGNUM;
+	}
+      else if(insn == 0x1781)				/* st rp,@-sp */
+	{
+		sp_offset -= 4;
+		fi->fsr.regs[RP_REGNUM] = sp_offset;
+	}
+      else if(insn == 0x170e)				/* st fp,@-sp */
+	{
+		sp_offset -= 4;
+		fi->fsr.regs[FP_REGNUM] = sp_offset;
+	}
+      else if(insn == 0x8bfe)				/* mov sp,fp */
+	{
+	  fi->framereg = FP_REGNUM;
+	}
+      else if((insn & 0xff00) == 0xa300)		/* addsp xx */
+	{
+	  sp_offset += 4 * (signed char)(insn & 0xff);
+	}
+      else if((insn & 0xff0f) == 0x9b00 &&		/* ldi:20 xx,r0 */
+	read_memory_unsigned_integer(current_pc+4, 2)
+	  == 0xac0f)					/* sub r0,sp */
+	{
+	  /* large stack adjustment */
+	  sp_offset -= (((insn & 0xf0) << 12) | read_memory_unsigned_integer(current_pc+2, 2));
+	  current_pc += 4;
+	}
+      else if(insn == 0x9f80 &&				/* ldi:32 xx,r0 */
+	read_memory_unsigned_integer(current_pc+6, 2)
+	  == 0xac0f)					/* sub r0,sp */
+	{
+	  /* large stack adjustment */
+	  sp_offset -=
+		(read_memory_unsigned_integer(current_pc+2, 2) << 16 |
+			read_memory_unsigned_integer(current_pc+4, 2));
+	  current_pc += 6;
+	}
+    }
+
+  /* The frame size is just the negative of the offset (from the original SP)
+     of the last thing thing we pushed on the stack.  The frame offset is
+     [new FP] - [new SP].  */
+  fi->framesize = -sp_offset;
+  fi->frameoffset = fp_offset - sp_offset;
+  
+  save_prologue_cache (fi);
+}
+
+/* Function: init_extra_frame_info
+   Setup the frame's frame pointer, pc, and frame addresses for saved
+   registers.  Most of the work is done in scan_prologue().
+
+   Note that when we are called for the last frame (currently active frame),
+   that fi->pc and fi->frame will already be setup.  However, fi->frame will
+   be valid only if this routine uses FP.  For previous frames, fi-frame will
+   always be correct (since that is derived from fr30_frame_chain ()).
+
+   We can be called with the PC in the call dummy under two circumstances.
+   First, during normal backtracing, second, while figuring out the frame
+   pointer just prior to calling the target function (see run_stack_dummy).  */
+
+void
+fr30_init_extra_frame_info (fi)
+     struct frame_info * fi;
+{
+  int reg;
+
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    {
+      /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+	 by assuming it's always FP.  */
+      fi->frame       = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
+      fi->framesize   = 0;
+      fi->frameoffset = 0;
+      return;
+    }
+      fr30_scan_prologue (fi);
+
+      if (!fi->next)			/* this is the innermost frame? */
+	fi->frame = read_register (fi->framereg);
+      else			 	/* not the innermost frame */
+	/* If we have an FP,  the callee saved it. */
+	if (fi->framereg == FP_REGNUM)
+	  if (fi->next->fsr.regs[fi->framereg] != 0)
+	    fi->frame = read_memory_integer (fi->next->fsr.regs[fi->framereg],
+					     4);
+      /* Calculate actual addresses of saved registers using offsets determined
+         by fr30_scan_prologue.  */
+      for (reg = 0; reg < NUM_REGS; reg++)
+	if (fi->fsr.regs[reg] != 0) {
+	  fi->fsr.regs[reg] += fi->frame + fi->framesize - fi->frameoffset;
+	}
+}
+
+/* Function: find_callers_reg
+   Find REGNUM on the stack.  Otherwise, it's in an active register.
+   One thing we might want to do here is to check REGNUM against the
+   clobber mask, and somehow flag it as invalid if it isn't saved on
+   the stack somewhere.  This would provide a graceful failure mode
+   when trying to get the value of caller-saves registers for an inner
+   frame.  */
+
+CORE_ADDR
+fr30_find_callers_reg (fi, regnum)
+     struct frame_info *fi;
+     int regnum;
+{
+  for (; fi; fi = fi->next)
+    if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+    else if (fi->fsr.regs[regnum] != 0)
+      return read_memory_unsigned_integer (fi->fsr.regs[regnum], 
+					   REGISTER_RAW_SIZE(regnum));
+
+  return read_register (regnum);
+}
+
+
+/* Function: frame_chain
+   Figure out the frame prior to FI.  Unfortunately, this involves
+   scanning the prologue of the caller, which will also be done
+   shortly by fr30_init_extra_frame_info.  For the dummy frame, we
+   just return the stack pointer that was in use at the time the
+   function call was made.  */
+
+
+CORE_ADDR
+fr30_frame_chain (fi)
+     struct frame_info * fi;
+{
+  CORE_ADDR fn_start, callers_pc, fp;
+  struct frame_info caller_fi;
+  int framereg;
+
+  /* is this a dummy frame? */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    return fi->frame;	/* dummy frame same as caller's frame */
+
+  /* is caller-of-this a dummy frame? */
+  callers_pc = FRAME_SAVED_PC(fi);  /* find out who called us: */
+  fp = fr30_find_callers_reg (fi, FP_REGNUM);
+  if (PC_IN_CALL_DUMMY (callers_pc, fp, fp))	
+    return fp;		/* dummy frame's frame may bear no relation to ours */
+
+  if (find_pc_partial_function (fi->pc, 0, &fn_start, 0))
+    if (fn_start == entry_point_address ())
+      return 0;		/* in _start fn, don't chain further */
+
+  framereg = fi->framereg;
+
+  /* If the caller is the startup code, we're at the end of the chain.  */
+  if (find_pc_partial_function (callers_pc, 0, &fn_start, 0))
+    if (fn_start == entry_point_address ())
+      return 0;
+
+  memset (& caller_fi, 0, sizeof (caller_fi));
+  caller_fi.pc = callers_pc;
+  fr30_scan_prologue (& caller_fi);
+  framereg = caller_fi.framereg;
+
+  /* If the caller used a frame register, return its value.
+     Otherwise, return the caller's stack pointer.  */
+  if (framereg == FP_REGNUM)
+    return fr30_find_callers_reg (fi, framereg);
+  else
+    return fi->frame + fi->framesize;
+}
+
+/* Function: frame_saved_pc 
+   Find the caller of this frame.  We do this by seeing if RP_REGNUM
+   is saved in the stack anywhere, otherwise we get it from the
+   registers.  If the inner frame is a dummy frame, return its PC
+   instead of RP, because that's where "caller" of the dummy-frame
+   will be found.  */
+
+CORE_ADDR
+fr30_frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM);
+  else
+    return fr30_find_callers_reg (fi, RP_REGNUM);
+}
+
+/* Function: fix_call_dummy
+   Pokes the callee function's address into the CALL_DUMMY assembly stub.
+   Assumes that the CALL_DUMMY looks like this:
+	jarl <offset24>, r31
+	trap
+   */
+
+int
+fr30_fix_call_dummy (dummy, sp, fun, nargs, args, type, gcc_p)
+     char *dummy;
+     CORE_ADDR sp;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  long offset24;
+
+  offset24 = (long) fun - (long) entry_point_address ();
+  offset24 &= 0x3fffff;
+  offset24 |= 0xff800000;	/* jarl <offset24>, r31 */
+
+  store_unsigned_integer ((unsigned int *)&dummy[2], 2, offset24 & 0xffff);
+  store_unsigned_integer ((unsigned int *)&dummy[0], 2, offset24 >> 16);
+  return 0;
+}
diff --git a/gdb/frame.h b/gdb/frame.h
new file mode 100644
index 0000000..6836c6c
--- /dev/null
+++ b/gdb/frame.h
@@ -0,0 +1,264 @@
+/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
+   Copyright 1986, 1989, 1991, 1992, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (FRAME_H)
+#define FRAME_H 1
+
+/* Describe the saved registers of a frame.  */
+
+#if defined (EXTRA_FRAME_INFO) || defined (FRAME_FIND_SAVED_REGS)
+/* XXXX - deprecated */
+struct frame_saved_regs
+  {
+
+    /* For each register, address of where it was saved on entry to
+       the frame, or zero if it was not saved on entry to this frame.
+       This includes special registers such as pc and fp saved in
+       special ways in the stack frame.  The SP_REGNUM is even more
+       special, the address here is the sp for the next frame, not the
+       address where the sp was saved.  */
+
+    CORE_ADDR regs[NUM_REGS];
+  };
+#endif
+
+/* We keep a cache of stack frames, each of which is a "struct
+   frame_info".  The innermost one gets allocated (in
+   wait_for_inferior) each time the inferior stops; current_frame
+   points to it.  Additional frames get allocated (in
+   get_prev_frame_info) as needed, and are chained through the next
+   and prev fields.  Any time that the frame cache becomes invalid
+   (most notably when we execute something, but also if we change how
+   we interpret the frames (e.g. "set heuristic-fence-post" in
+   mips-tdep.c, or anything which reads new symbols)), we should call
+   reinit_frame_cache.  */
+
+struct frame_info
+  {
+    /* Nominal address of the frame described.  See comments at FRAME_FP
+       about what this means outside the *FRAME* macros; in the *FRAME*
+       macros, it can mean whatever makes most sense for this machine.  */
+    CORE_ADDR frame;
+
+    /* Address at which execution is occurring in this frame.
+       For the innermost frame, it's the current pc.
+       For other frames, it is a pc saved in the next frame.  */
+    CORE_ADDR pc;
+
+    /* Nonzero if this is a frame associated with calling a signal handler.
+
+       Set by machine-dependent code.  On some machines, if
+       the machine-dependent code fails to check for this, the backtrace
+       will look relatively normal.  For example, on the i386
+         #3  0x158728 in sighold ()
+       On other machines (e.g. rs6000), the machine-dependent code better
+       set this to prevent us from trying to print it like a normal frame.  */
+    int signal_handler_caller;
+
+    /* For each register, address of where it was saved on entry to
+       the frame, or zero if it was not saved on entry to this frame.
+       This includes special registers such as pc and fp saved in
+       special ways in the stack frame.  The SP_REGNUM is even more
+       special, the address here is the sp for the next frame, not the
+       address where the sp was saved.  */
+    /* Allocated by frame_saved_regs_zalloc () which is called /
+       initialized by FRAME_INIT_SAVED_REGS(). */
+    CORE_ADDR *saved_regs; /*NUM_REGS*/
+
+#ifdef EXTRA_FRAME_INFO
+    /* XXXX - deprecated */
+    /* Anything extra for this structure that may have been defined
+       in the machine dependent files. */
+    EXTRA_FRAME_INFO
+#endif
+
+    /* Anything extra for this structure that may have been defined
+       in the machine dependent files. */
+    /* Allocated by frame_obstack_alloc () which is called /
+       initialized by INIT_EXTRA_FRAME_INFO */
+    struct frame_extra_info *extra_info;
+
+    /* Pointers to the next and previous frame_info's in the frame cache.  */
+   struct frame_info *next, *prev;
+  };
+
+/* Allocate additional space for appendices to a struct frame_info. */
+
+#ifndef SIZEOF_FRAME_SAVED_REGS
+#define SIZEOF_FRAME_SAVED_REGS (sizeof (CORE_ADDR) * (NUM_REGS))
+#endif
+extern void *frame_obstack_alloc PARAMS ((unsigned long size));
+extern void frame_saved_regs_zalloc PARAMS ((struct frame_info *));
+
+/* Dummy frame.  This saves the processor state just prior to setting up the
+   inferior function call.  On most targets, the registers are saved on the
+   target stack, but that really slows down function calls.  */
+
+struct dummy_frame
+{
+  struct dummy_frame *next;
+
+  CORE_ADDR pc;
+  CORE_ADDR fp;
+  CORE_ADDR sp;
+  char regs[REGISTER_BYTES];
+};
+
+/* Return the frame address from FR.  Except in the machine-dependent
+   *FRAME* macros, a frame address has no defined meaning other than
+   as a magic cookie which identifies a frame over calls to the
+   inferior.  The only known exception is inferior.h
+   (PC_IN_CALL_DUMMY) [ON_STACK]; see comments there.  You cannot
+   assume that a frame address contains enough information to
+   reconstruct the frame; if you want more than just to identify the
+   frame (e.g. be able to fetch variables relative to that frame),
+   then save the whole struct frame_info (and the next struct
+   frame_info, since the latter is used for fetching variables on some
+   machines).  */
+
+#define FRAME_FP(fi) ((fi)->frame)
+
+/* Define a default FRAME_CHAIN_VALID, in the form that is suitable for most
+   targets.  If FRAME_CHAIN_VALID returns zero it means that the given frame
+   is the outermost one and has no caller.
+
+   If a particular target needs a different definition, then it can override
+   the definition here by providing one in the tm file.
+
+   XXXX - both default and alternate frame_chain_valid functions are
+   deprecated.  New code should use generic dummy frames. */
+
+extern int default_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+extern int alternate_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+extern int nonnull_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+extern int generic_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+
+#if !defined (FRAME_CHAIN_VALID)
+#if !defined (FRAME_CHAIN_VALID_ALTERNATE)
+#define FRAME_CHAIN_VALID(chain, thisframe) default_frame_chain_valid (chain, thisframe)
+#else
+/* Use the alternate method of avoiding running up off the end of the frame
+   chain or following frames back into the startup code.  See the comments
+   in objfiles.h. */
+#define FRAME_CHAIN_VALID(chain, thisframe) alternate_frame_chain_valid (chain,thisframe)
+#endif	/* FRAME_CHAIN_VALID_ALTERNATE */
+#endif	/* FRAME_CHAIN_VALID */
+
+/* The stack frame that the user has specified for commands to act on.
+   Note that one cannot assume this is the address of valid data.  */
+
+extern struct frame_info *selected_frame;
+
+/* Level of the selected frame:
+   0 for innermost, 1 for its caller, ...
+   or -1 for frame specified by address with no defined level.  */
+
+extern int selected_frame_level;
+
+extern struct frame_info *get_prev_frame_info PARAMS ((struct frame_info *));
+
+extern struct frame_info *create_new_frame PARAMS ((CORE_ADDR, CORE_ADDR));
+
+extern void flush_cached_frames PARAMS ((void));
+
+extern void reinit_frame_cache PARAMS ((void));
+
+
+#ifdef FRAME_FIND_SAVED_REGS
+/* XXX - deprecated */
+#define FRAME_INIT_SAVED_REGS(FI) get_frame_saved_regs (FI, NULL)
+extern void get_frame_saved_regs PARAMS ((struct frame_info *,
+					  struct frame_saved_regs *));
+#endif
+  
+extern void set_current_frame PARAMS ((struct frame_info *));
+
+extern struct frame_info *get_prev_frame PARAMS ((struct frame_info *));
+
+extern struct frame_info *get_current_frame PARAMS ((void));
+
+extern struct frame_info *get_next_frame PARAMS ((struct frame_info *));
+
+extern struct block *get_frame_block PARAMS ((struct frame_info *));
+
+extern struct block *get_current_block PARAMS ((void));
+
+extern struct block *get_selected_block PARAMS ((void));
+
+extern struct symbol *get_frame_function PARAMS ((struct frame_info *));
+
+extern CORE_ADDR get_frame_pc PARAMS ((struct frame_info *));
+
+extern CORE_ADDR get_pc_function_start PARAMS ((CORE_ADDR));
+
+extern struct block * block_for_pc PARAMS ((CORE_ADDR));
+
+extern struct block * block_for_pc_sect PARAMS ((CORE_ADDR, asection *));
+
+extern int frameless_look_for_prologue PARAMS ((struct frame_info *));
+
+extern void print_frame_args PARAMS ((struct symbol *, struct frame_info *,
+				      int, GDB_FILE *));
+
+extern struct frame_info *find_relative_frame PARAMS ((struct frame_info *, int*));
+
+extern void print_stack_frame PARAMS ((struct frame_info *, int, int));
+
+extern void print_only_stack_frame PARAMS ((struct frame_info *, int, int));
+
+extern void show_stack_frame PARAMS ((struct frame_info *));
+
+extern void select_frame PARAMS ((struct frame_info *, int));
+
+extern void record_selected_frame PARAMS ((CORE_ADDR *, int *));
+
+extern void select_and_print_frame PARAMS ((struct frame_info *, int));
+
+extern void print_frame_info PARAMS ((struct frame_info *, int, int, int));
+
+extern void show_frame_info PARAMS ((struct frame_info *, int, int, int));
+
+extern CORE_ADDR find_saved_register PARAMS ((struct frame_info *, int));
+
+extern struct frame_info *block_innermost_frame PARAMS ((struct block *));
+
+extern struct frame_info *find_frame_addr_in_frame_chain PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR sigtramp_saved_pc PARAMS ((struct frame_info *));
+
+extern CORE_ADDR generic_read_register_dummy PARAMS ((CORE_ADDR pc, 
+						      CORE_ADDR fp, 
+						      int));
+extern void      generic_push_dummy_frame    PARAMS ((void));
+extern void      generic_pop_current_frame   PARAMS ((void (*) (struct frame_info *)));
+extern void      generic_pop_dummy_frame     PARAMS ((void));
+
+extern int       generic_pc_in_call_dummy    PARAMS ((CORE_ADDR pc, 
+						      CORE_ADDR fp));
+extern char *    generic_find_dummy_frame    PARAMS ((CORE_ADDR pc, 
+						      CORE_ADDR fp));
+
+#ifdef __GNUC__
+/* Some native compilers, even ones that are supposed to be ANSI and for which __STDC__
+   is true, complain about forward decls of enums. */
+enum lval_type;
+extern void	 generic_get_saved_register  PARAMS ((char *, int *, CORE_ADDR *, struct frame_info *, int, enum lval_type *));
+#endif
+
+#endif /* !defined (FRAME_H)  */
diff --git a/gdb/gdb-stabs.h b/gdb/gdb-stabs.h
new file mode 100644
index 0000000..1ad782a
--- /dev/null
+++ b/gdb/gdb-stabs.h
@@ -0,0 +1,92 @@
+/* Definitions for symbol-reading containing "stabs", for GDB.
+   Copyright 1992 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by John Gilmore.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file exists to hold the common definitions required of most of
+   the symbol-readers that end up using stabs.  The common use of
+   these `symbol-type-specific' customizations of the generic data
+   structures makes the stabs-oriented symbol readers able to call
+   each others' functions as required.  */
+
+#if !defined (GDBSTABS_H)
+#define GDBSTABS_H
+
+/* Offsets in the psymtab's section_offsets array for various kinds of
+   stabs symbols.  Every psymtab built from stabs will have these offsets
+   filled in by these guidelines, so that when actually reading symbols, the
+   proper offset can simply be selected and added to the symbol value.  */
+
+#define	SECT_OFF_TEXT	0
+#define	SECT_OFF_DATA	1
+#define	SECT_OFF_BSS	2
+#define	SECT_OFF_RODATA	3
+#define	SECT_OFF_MAX	4		/* Count of possible values */
+
+/* The stab_section_info chain remembers info from the ELF symbol table,
+   while psymtabs are being built for the other symbol tables in the 
+   objfile.  It is destroyed at the complation of psymtab-reading.
+   Any info that was used from it has been copied into psymtabs.  */
+
+struct stab_section_info {
+  char *filename;
+  CORE_ADDR sections[SECT_OFF_MAX];
+  struct stab_section_info *next;
+  int found;		/* Count of times it's found in searching */
+};
+
+/* Information is passed among various dbxread routines for accessing
+   symbol files.  A pointer to this structure is kept in the sym_stab_info
+   field of the objfile struct.  */
+ 
+struct dbx_symfile_info {
+  CORE_ADDR text_addr;		/* Start of text section */
+  int text_size;		/* Size of text section */
+  int symcount;			/* How many symbols are there in the file */
+  char *stringtab;		/* The actual string table */
+  int stringtab_size;		/* Its size */
+  file_ptr symtab_offset;	/* Offset in file to symbol table */
+  int symbol_size;		/* Bytes in a single symbol */
+  struct stab_section_info *stab_section_info; 	/* section starting points
+				   of the original .o files before linking. */
+
+  /* See stabsread.h for the use of the following. */
+  struct header_file *header_files;
+  int n_header_files;
+  int n_allocated_header_files;
+
+  /* Pointers to BFD sections.  These are used to speed up the building of
+     minimal symbols.  */
+  asection *text_section;
+  asection *data_section;
+  asection *bss_section;
+};
+
+#define DBX_SYMFILE_INFO(o)	((o)->sym_stab_info)
+#define DBX_TEXT_ADDR(o)	(DBX_SYMFILE_INFO(o)->text_addr)
+#define DBX_TEXT_SIZE(o)	(DBX_SYMFILE_INFO(o)->text_size)
+#define DBX_SYMCOUNT(o)		(DBX_SYMFILE_INFO(o)->symcount)
+#define DBX_STRINGTAB(o)	(DBX_SYMFILE_INFO(o)->stringtab)
+#define DBX_STRINGTAB_SIZE(o)	(DBX_SYMFILE_INFO(o)->stringtab_size)
+#define DBX_SYMTAB_OFFSET(o)	(DBX_SYMFILE_INFO(o)->symtab_offset)
+#define DBX_SYMBOL_SIZE(o)	(DBX_SYMFILE_INFO(o)->symbol_size)
+#define DBX_TEXT_SECTION(o)	(DBX_SYMFILE_INFO(o)->text_section)
+#define DBX_DATA_SECTION(o)	(DBX_SYMFILE_INFO(o)->data_section)
+#define DBX_BSS_SECTION(o)	(DBX_SYMFILE_INFO(o)->bss_section)
+
+#endif /* GDBSTABS_H */
diff --git a/gdb/gdb.1 b/gdb/gdb.1
new file mode 100644
index 0000000..2430b18
--- /dev/null
+++ b/gdb/gdb.1
@@ -0,0 +1,375 @@
+.\" Copyright (c) 1991 Free Software Foundation
+.\" See section COPYING for conditions for redistribution
+.\" $Id$
+.TH gdb 1 "4nov1991" "GNU Tools" "GNU Tools"
+.SH NAME
+gdb \- The GNU Debugger
+.SH SYNOPSIS
+.na
+.TP
+.B gdb
+.RB "[\|" \-help "\|]"
+.RB "[\|" \-nx "\|]"
+.RB "[\|" \-q "\|]"
+.RB "[\|" \-batch "\|]"
+.RB "[\|" \-cd=\c
+.I dir\c
+\|]
+.RB "[\|" \-f "\|]"
+.RB "[\|" "\-b\ "\c
+.IR bps "\|]"
+.RB "[\|" "\-tty="\c
+.IR dev "\|]"
+.RB "[\|" "\-s "\c
+.I symfile\c
+\&\|]
+.RB "[\|" "\-e "\c
+.I prog\c
+\&\|]  
+.RB "[\|" "\-se "\c
+.I prog\c
+\&\|]
+.RB "[\|" "\-c "\c
+.I core\c
+\&\|]
+.RB "[\|" "\-x "\c
+.I cmds\c
+\&\|]
+.RB "[\|" "\-d "\c
+.I dir\c
+\&\|]
+.RB "[\|" \c
+.I prog\c
+.RB "[\|" \c
+.IR core \||\| procID\c
+\&\|]\&\|]
+.ad b
+.SH DESCRIPTION
+The purpose of a debugger such as GDB is to allow you to see what is
+going on ``inside'' another program while it executes\(em\&or what another
+program was doing at the moment it crashed.
+
+GDB can do four main kinds of things (plus other things in support of
+these) to help you catch bugs in the act:
+
+.TP
+\ \ \ \(bu
+Start your program, specifying anything that might affect its behavior.
+
+.TP
+\ \ \ \(bu
+Make your program stop on specified conditions.
+
+.TP
+\ \ \ \(bu
+Examine what has happened, when your program has stopped.
+
+.TP
+\ \ \ \(bu
+Change things in your program, so you can experiment with correcting the
+effects of one bug and go on to learn about another.
+.PP
+
+You can use GDB to debug programs written in C, C++, and Modula-2.
+Fortran support will be added when a GNU Fortran compiler is ready.
+
+GDB is invoked with the shell command \c
+.B gdb\c
+\&.  Once started, it reads
+commands from the terminal until you tell it to exit with the GDB
+command \c
+.B quit\c
+\&.  You can get online help from \c
+.B gdb\c
+\& itself
+by using the command \c
+.B help\c
+\&.
+
+You can run \c
+.B gdb\c
+\& with no arguments or options; but the most
+usual way to start GDB is with one argument or two, specifying an
+executable program as the argument:
+.sp
+.br
+gdb\ program
+.br
+.sp
+
+You can also start with both an executable program and a core file specified:
+.sp
+.br
+gdb\ program\ core
+.br
+.sp
+
+You can, instead, specify a process ID as a second argument, if you want
+to debug a running process:
+.sp
+.br
+gdb\ program\ 1234
+.br
+.sp
+
+would attach GDB to process \c
+.B 1234\c
+\& (unless you also have a file
+named `\|\c
+.B 1234\c
+\&\|'; GDB does check for a core file first).
+
+Here are some of the most frequently needed GDB commands:
+.TP
+.B break \fR[\|\fIfile\fB:\fR\|]\fIfunction
+\&
+Set a breakpoint at \c
+.I function\c
+\& (in \c
+.I file\c
+\&).
+.TP
+.B run \fR[\|\fIarglist\fR\|]
+Start your program (with \c
+.I arglist\c
+\&, if specified).
+.TP
+.B bt
+Backtrace: display the program stack.
+.TP
+.BI print " expr"\c
+\&
+Display the value of an expression.
+.TP
+.B c
+Continue running your program (after stopping, e.g. at a breakpoint).
+.TP
+.B next
+Execute next program line (after stopping); step \c
+.I over\c
+\& any
+function calls in the line.
+.TP
+.B step
+Execute next program line (after stopping); step \c
+.I into\c
+\& any
+function calls in the line.
+.TP
+.B help \fR[\|\fIname\fR\|]
+Show information about GDB command \c
+.I name\c
+\&, or general information
+about using GDB.
+.TP
+.B quit
+Exit from GDB.
+.PP
+For full details on GDB, see \c
+.I 
+Using GDB: A Guide to the GNU Source-Level Debugger\c
+\&, by Richard M. Stallman and Roland H. Pesch.  The same text is available online
+as the \c
+.B gdb\c
+\& entry in the \c
+.B info\c
+\& program.
+.SH OPTIONS
+Any arguments other than options specify an executable
+file and core file (or process ID); that is, the first argument
+encountered with no 
+associated option flag is equivalent to a `\|\c
+.B \-se\c
+\&\|' option, and the
+second, if any, is equivalent to a `\|\c
+.B \-c\c
+\&\|' option if it's the name of a file.  Many options have
+both long and short forms; both are shown here.  The long forms are also
+recognized if you truncate them, so long as enough of the option is
+present to be unambiguous.  (If you prefer, you can flag option
+arguments with `\|\c
+.B +\c
+\&\|' rather than `\|\c
+.B \-\c
+\&\|', though we illustrate the
+more usual convention.)
+
+All the options and command line arguments you give are processed
+in sequential order.  The order makes a difference when the
+`\|\c
+.B \-x\c
+\&\|' option is used.
+
+.TP
+.B \-help
+.TP
+.B \-h
+List all options, with brief explanations.
+
+.TP
+.BI "\-symbols=" "file"\c
+.TP
+.BI "\-s " "file"\c
+\&
+Read symbol table from file \c
+.I file\c
+\&.
+
+.TP
+.B \-write
+Enable writing into executable and core files.
+
+.TP
+.BI "\-exec=" "file"\c
+.TP
+.BI "\-e " "file"\c
+\&
+Use file \c
+.I file\c
+\& as the executable file to execute when
+appropriate, and for examining pure data in conjunction with a core
+dump.
+
+.TP
+.BI "\-se=" "file"\c
+\&
+Read symbol table from file \c
+.I file\c
+\& and use it as the executable
+file.
+
+.TP
+.BI "\-core=" "file"\c
+.TP
+.BI "\-c " "file"\c
+\&
+Use file \c
+.I file\c
+\& as a core dump to examine.
+
+.TP
+.BI "\-command=" "file"\c
+.TP
+.BI "\-x " "file"\c
+\&
+Execute GDB commands from file \c
+.I file\c
+\&.  
+
+.TP
+.BI "\-directory=" "directory"\c
+.TP
+.BI "\-d " "directory"\c
+\&
+Add \c
+.I directory\c
+\& to the path to search for source files.
+.PP
+
+.TP
+.B \-nx
+.TP
+.B \-n
+Do not execute commands from any `\|\c
+.B .gdbinit\c
+\&\|' initialization files.
+Normally, the commands in these files are executed after all the
+command options and arguments have been processed.
+
+
+.TP
+.B \-quiet
+.TP
+.B \-q
+``Quiet''.  Do not print the introductory and copyright messages.  These
+messages are also suppressed in batch mode.
+
+.TP
+.B \-batch
+Run in batch mode.  Exit with status \c
+.B 0\c
+\& after processing all the command
+files specified with `\|\c
+.B \-x\c
+\&\|' (and `\|\c
+.B .gdbinit\c
+\&\|', if not inhibited).
+Exit with nonzero status if an error occurs in executing the GDB
+commands in the command files.
+
+Batch mode may be useful for running GDB as a filter, for example to
+download and run a program on another computer; in order to make this
+more useful, the message
+.sp
+.br
+Program\ exited\ normally.
+.br
+.sp
+
+(which is ordinarily issued whenever a program running under GDB control
+terminates) is not issued when running in batch mode.
+
+.TP
+.BI "\-cd=" "directory"\c
+\&
+Run GDB using \c
+.I directory\c
+\& as its working directory,
+instead of the current directory.
+
+.TP
+.B \-fullname
+.TP
+.B \-f
+Emacs sets this option when it runs GDB as a subprocess.  It tells GDB
+to output the full file name and line number in a standard,
+recognizable fashion each time a stack frame is displayed (which
+includes each time the program stops).  This recognizable format looks
+like two `\|\c
+.B \032\c
+\&\|' characters, followed by the file name, line number
+and character position separated by colons, and a newline.  The
+Emacs-to-GDB interface program uses the two `\|\c
+.B \032\c
+\&\|' characters as
+a signal to display the source code for the frame.
+
+.TP
+.BI "\-b " "bps"\c
+\&
+Set the line speed (baud rate or bits per second) of any serial
+interface used by GDB for remote debugging.
+
+.TP
+.BI "\-tty=" "device"\c
+\&
+Run using \c
+.I device\c
+\& for your program's standard input and output.
+.PP
+
+.SH "SEE ALSO"
+.RB "`\|" gdb "\|'"
+entry in
+.B info\c
+\&;
+.I 
+Using GDB: A Guide to the GNU Source-Level Debugger\c
+, Richard M. Stallman and Roland H. Pesch, July 1991.
+.SH COPYING
+Copyright (c) 1991 Free Software Foundation, Inc.
+.PP
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+.PP
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+.PP
+Permission is granted to copy and distribute translations of this
+manual into another language, under the above conditions for modified
+versions, except that this permission notice may be included in
+translations approved by the Free Software Foundation instead of in
+the original English.
diff --git a/gdb/gdb.gdb b/gdb/gdb.gdb
new file mode 100644
index 0000000..4377841
--- /dev/null
+++ b/gdb/gdb.gdb
@@ -0,0 +1,35 @@
+# Examples of using gdb's command language to print out various gdb data
+# structures.
+
+define list-objfiles
+  set $obj = object_files
+  printf "objfile    bfd        msyms  name\n"
+  while $obj != 0
+    printf "0x%-8x 0x%-8x %6d %s\n", $obj, $obj->obfd, \
+      $obj->minimal_symbol_count, $obj->name
+    set var $obj = $obj->next
+  end
+end
+document list-objfiles
+Print a table of the current objfiles.
+end
+
+define print-values
+  printf "Location  Offset        Size  Lazy   Contents0-3  Lval\n"
+  set $val = $arg0
+  while $val != 0
+    printf "%8x  %6d  %10d  %4d  %12x  ", $val->location.address, \
+      $val->offset, \
+      $val->type->length, $val->lazy, $val->aligner.contents[0]
+    output $val->lval
+    printf "\n"
+    set $val = $val->next
+  end
+end
+document print-values
+Print a list of values.
+Takes one argument, the value to print, and prints all the values which
+are chained through the next field.  Thus the most recently created values
+will be listed first.  The "Contents0-3" field gives the first "int"
+of the VALUE_CONTENTS; not the entire contents.
+end
diff --git a/gdb/gdb_stat.h b/gdb/gdb_stat.h
new file mode 100644
index 0000000..b871b29
--- /dev/null
+++ b/gdb/gdb_stat.h
@@ -0,0 +1,68 @@
+/* Portable <sys/stat.h>
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined(GDB_STAT_H)
+#define GDB_STAT_H
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#ifdef STAT_MACROS_BROKEN
+#undef S_ISBLK
+#undef S_ISCHR
+#undef S_ISDIR
+#undef S_ISREG
+#undef S_ISFIFO
+#undef S_ISLNK
+#undef S_ISSOCK
+#undef S_ISMPB
+#undef S_ISMPC
+#undef S_ISNWK
+#endif
+
+#if !defined(S_ISBLK) && defined(S_IFBLK)
+#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
+#endif
+#if !defined(S_ISCHR) && defined(S_IFCHR)
+#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
+#endif
+#if !defined(S_ISDIR) && defined(S_IFDIR)
+#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
+#endif
+#if !defined(S_ISREG) && defined(S_IFREG)
+#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
+#endif
+#if !defined(S_ISFIFO) && defined(S_IFIFO)
+#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
+#endif
+#if !defined(S_ISLNK) && defined(S_IFLNK)
+#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
+#endif
+#if !defined(S_ISSOCK) && defined(S_IFSOCK)
+#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
+#endif
+#if !defined(S_ISMPB) && defined(S_IFMPB) /* V7 */
+#define S_ISMPB(m) (((m) & S_IFMT) == S_IFMPB)
+#define S_ISMPC(m) (((m) & S_IFMT) == S_IFMPC)
+#endif
+#if !defined(S_ISNWK) && defined(S_IFNWK) /* HP/UX */
+#define S_ISNWK(m) (((m) & S_IFMT) == S_IFNWK)
+#endif
+
+#endif	/* !defined(GDB_STAT_H) */
diff --git a/gdb/gdb_string.h b/gdb/gdb_string.h
new file mode 100644
index 0000000..944eec1
--- /dev/null
+++ b/gdb/gdb_string.h
@@ -0,0 +1,68 @@
+/* Portable <string.h>
+   Copyright 1995, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined(GDB_STRING_H)
+#define GDB_STRING_H
+
+#ifdef STDC_HEADERS
+#include <string.h>
+#else
+# ifdef HAVE_STRING_H
+#   include <string.h>
+# else
+#   include <strings.h>
+# endif
+
+#ifndef strchr
+extern char *strchr PARAMS ((const char *, int));	/* X3.159-1989  4.11.5.2 */
+#endif
+
+#ifndef strrchr
+extern char *strrchr PARAMS ((const char *, int));	/* X3.159-1989  4.11.5.5 */
+#endif
+
+#ifndef strstr
+extern char *strstr PARAMS ((const char *, const char *));	/* X3.159-1989  4.11.5.7 */
+#endif
+
+#ifndef strtok
+extern char *strtok PARAMS ((char *, const char *));	/* X3.159-1989  4.11.5.8 */
+#endif
+
+# ifdef HAVE_MEMORY_H
+#   include <memory.h>
+# else
+extern void *memset();
+extern void *memcpy();
+extern void *memmove();
+extern int   memcmp();
+# endif
+#endif /* STDC_HEADERS */
+
+#ifdef NEED_DECLARATION_STRERROR
+#ifndef strerror
+extern char *strerror PARAMS ((int));	/* X3.159-1989  4.11.6.2 */
+#endif
+#endif
+
+#ifdef NEED_DECLARATION_STRDUP
+extern char *strdup (); /* full prototype collides w/ some OSes (AIX 3.2.5) */
+#endif
+
+#endif	/* !defined(GDB_STRING_H) */
diff --git a/gdb/gdba.el b/gdb/gdba.el
new file mode 100644
index 0000000..0f71586
--- /dev/null
+++ b/gdb/gdba.el
@@ -0,0 +1,2607 @@
+(defmacro gud (form)
+  (` (save-excursion (set-buffer "*gud-a.out*") (, form))))
+
+(defun dbug (foo &optional fun)
+  (save-excursion
+    (set-buffer (get-buffer-create "*trace*"))
+    (goto-char (point-max))
+    (insert "***" (symbol-name foo) "\n")
+    (if fun
+	(funcall fun))))
+
+
+;;; gud.el --- Grand Unified Debugger mode for gdb, sdb, dbx, or xdb
+;;;            under Emacs
+
+;; Author: Eric S. Raymond <esr@snark.thyrsus.com>
+;; Maintainer: FSF
+;; Version: 1.3
+;; Keywords: unix, tools
+
+;; Copyright (C) 1992, 1993 Free Software Foundation, Inc.
+
+;; This file is part of GNU Emacs.
+
+;; GNU Emacs is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2, or (at your option)
+;; any later version.
+
+;; GNU Emacs is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;; GNU General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with GNU Emacs; if not, write to the Free Software
+;; Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+;;; Commentary:
+
+;; The ancestral gdb.el was by W. Schelter <wfs@rascal.ics.utexas.edu>
+;; It was later rewritten by rms.  Some ideas were due to Masanobu. 
+;; Grand Unification (sdb/dbx support) by Eric S. Raymond <esr@thyrsus.com>
+;; The overloading code was then rewritten by Barry Warsaw <bwarsaw@cen.com>,
+;; who also hacked the mode to use comint.el.  Shane Hartman <shane@spr.com>
+;; added support for xdb (HPUX debugger).
+
+;; Cygnus Support added support for gdb's --annotate=2.
+
+;;; Code:
+
+(require 'comint)
+(require 'etags)
+
+;; ======================================================================
+;; GUD commands must be visible in C buffers visited by GUD
+
+(defvar gud-key-prefix "\C-x\C-a"
+  "Prefix of all GUD commands valid in C buffers.")
+
+(global-set-key (concat gud-key-prefix "\C-l") 'gud-refresh)
+(global-set-key "\C-x " 'gud-break)	;; backward compatibility hack
+
+;; ======================================================================
+;; the overloading mechanism
+
+(defun gud-overload-functions (gud-overload-alist)
+  "Overload functions defined in GUD-OVERLOAD-ALIST.
+This association list has elements of the form
+     (ORIGINAL-FUNCTION-NAME  OVERLOAD-FUNCTION)"
+  (mapcar
+   (function (lambda (p) (fset (car p) (symbol-function (cdr p)))))
+   gud-overload-alist))
+
+(defun gud-massage-args (file args)
+  (error "GUD not properly entered."))
+
+(defun gud-marker-filter (str)
+  (error "GUD not properly entered."))
+
+(defun gud-find-file (f)
+  (error "GUD not properly entered."))
+
+;; ======================================================================
+;; command definition
+
+;; This macro is used below to define some basic debugger interface commands.
+;; Of course you may use `gud-def' with any other debugger command, including
+;; user defined ones.
+
+;; A macro call like (gud-def FUNC NAME KEY DOC) expands to a form
+;; which defines FUNC to send the command NAME to the debugger, gives
+;; it the docstring DOC, and binds that function to KEY in the GUD
+;; major mode.  The function is also bound in the global keymap with the
+;; GUD prefix.
+
+(defmacro gud-def (func cmd key &optional doc)
+  "Define FUNC to be a command sending STR and bound to KEY, with
+optional doc string DOC.  Certain %-escapes in the string arguments
+are interpreted specially if present.  These are:
+
+  %f	name (without directory) of current source file. 
+  %d	directory of current source file. 
+  %l	number of current source line
+  %e	text of the C lvalue or function-call expression surrounding point.
+  %a	text of the hexadecimal address surrounding point
+  %p	prefix argument to the command (if any) as a number
+
+  The `current' source file is the file of the current buffer (if
+we're in a C file) or the source file current at the last break or
+step (if we're in the GUD buffer).
+  The `current' line is that of the current buffer (if we're in a
+source file) or the source line number at the last break or step (if
+we're in the GUD buffer)."
+  (list 'progn
+	(list 'defun func '(arg)
+	      (or doc "")
+	      '(interactive "p")
+	      (list 'gud-call cmd 'arg))
+	(if key
+	    (list 'define-key
+		  '(current-local-map)
+		  (concat "\C-c" key)
+		  (list 'quote func)))
+	(if key
+	    (list 'global-set-key
+		  (list 'concat 'gud-key-prefix key)
+		  (list 'quote func)))))
+
+;; Where gud-display-frame should put the debugging arrow.  This is
+;; set by the marker-filter, which scans the debugger's output for
+;; indications of the current program counter.
+(defvar gud-last-frame nil)
+
+;; Used by gud-refresh, which should cause gud-display-frame to redisplay
+;; the last frame, even if it's been called before and gud-last-frame has
+;; been set to nil.
+(defvar gud-last-last-frame nil)
+
+;; All debugger-specific information is collected here.
+;; Here's how it works, in case you ever need to add a debugger to the mode.
+;;
+;; Each entry must define the following at startup:
+;;
+;;<name>
+;; comint-prompt-regexp
+;; gud-<name>-massage-args
+;; gud-<name>-marker-filter
+;; gud-<name>-find-file
+;;
+;; The job of the massage-args method is to modify the given list of
+;; debugger arguments before running the debugger.
+;;
+;; The job of the marker-filter method is to detect file/line markers in
+;; strings and set the global gud-last-frame to indicate what display
+;; action (if any) should be triggered by the marker.  Note that only
+;; whatever the method *returns* is displayed in the buffer; thus, you
+;; can filter the debugger's output, interpreting some and passing on
+;; the rest.
+;;
+;; The job of the find-file method is to visit and return the buffer indicated
+;; by the car of gud-tag-frame.  This may be a file name, a tag name, or
+;; something else.
+
+;; ======================================================================
+;; gdb functions
+
+;;; History of argument lists passed to gdb.
+(defvar gud-gdb-history nil)
+
+(defun gud-gdb-massage-args (file args)
+  (cons "--annotate=2" (cons file args)))
+
+
+;;
+;; In this world, there are gdb instance objects (of unspecified 
+;; representation) and buffers associated with those objects.
+;;
+
+;; 
+;; gdb-instance objects
+;; 
+
+(defun make-gdb-instance (proc)
+  "Create a gdb instance object from a gdb process."
+  (setq last-proc proc)
+  (let ((instance (cons 'gdb-instance proc)))
+    (save-excursion
+      (set-buffer (process-buffer proc))
+      (setq gdb-buffer-instance instance)
+      (progn
+	(mapcar 'make-variable-buffer-local gdb-instance-variables)
+	(setq gdb-buffer-type 'gud)
+	;; If we're taking over the buffer of another process,
+	;; take over it's ancillery buffers as well.
+	;;
+	(let ((dead (or old-gdb-buffer-instance)))
+	  (mapcar
+	   (function
+	    (lambda (b)
+	      (progn
+		(set-buffer b)
+		(if (eq dead gdb-buffer-instance)
+		    (setq gdb-buffer-instance instance)))))
+	     (buffer-list)))))
+    instance))
+
+(defun gdb-instance-process (inst) (cdr inst))
+
+;;; The list of instance variables is built up by the expansions of
+;;; DEF-GDB-VARIABLE
+;;;
+(defvar gdb-instance-variables '()
+  "A list of variables that are local to the gud buffer associated
+with a gdb instance.") 
+
+(defmacro def-gdb-variable
+  (name accessor setter &optional default doc)
+  (`
+   (progn
+     (defvar (, name) (, default) (, (or doc "undocumented")))
+     (if (not (memq '(, name) gdb-instance-variables))
+	 (setq gdb-instance-variables
+	       (cons '(, name) gdb-instance-variables)))
+     (, (and accessor
+	     (`
+	      (defun (, accessor) (instance)
+		(let
+		    ((buffer (gdb-get-instance-buffer instance 'gud)))
+		  (and buffer
+		       (save-excursion
+			 (set-buffer buffer)
+			 (, name))))))))
+     (, (and setter
+	     (`
+	      (defun (, setter) (instance val)
+		(let
+		    ((buffer (gdb-get-instance-buffer instance 'gud)))
+		  (and buffer
+		       (save-excursion
+			 (set-buffer buffer)
+			 (setq (, name) val)))))))))))
+
+(defmacro def-gdb-var (root-symbol &optional default doc)
+  (let* ((root (symbol-name root-symbol))
+	 (accessor (intern (concat "gdb-instance-" root)))
+	 (setter (intern (concat "set-gdb-instance-" root)))
+	 (var-name (intern (concat "gdb-" root))))
+    (` (def-gdb-variable
+	 (, var-name) (, accessor) (, setter)
+	 (, default) (, doc)))))
+
+(def-gdb-var buffer-instance nil
+  "In an instance buffer, the buffer's instance.")
+
+(def-gdb-var buffer-type nil
+  "One of the symbols bound in gdb-instance-buffer-rules")
+
+(def-gdb-var burst ""
+  "A string of characters from gdb that have not yet been processed.")
+
+(def-gdb-var input-queue ()
+  "A list of high priority gdb command objects.")
+
+(def-gdb-var idle-input-queue ()
+  "A list of low priority gdb command objects.")
+
+(def-gdb-var prompting nil
+  "True when gdb is idle with no pending input.")
+
+(def-gdb-var output-sink 'user
+  "The disposition of the output of the current gdb command.
+Possible values are these symbols:
+
+    user -- gdb output should be copied to the gud buffer 
+            for the user to see.
+
+    inferior -- gdb output should be copied to the inferior-io buffer
+
+    pre-emacs -- output should be ignored util the post-prompt
+                 annotation is received.  Then the output-sink
+		 becomes:...
+    emacs -- output should be collected in the partial-output-buffer
+	     for subsequent processing by a command.  This is the
+	     disposition of output generated by commands that
+	     gud mode sends to gdb on its own behalf.
+    post-emacs -- ignore input until the prompt annotation is 
+		  received, then go to USER disposition.
+")
+
+(def-gdb-var current-item nil
+  "The most recent command item sent to gdb.")
+
+(def-gdb-var pending-triggers '()
+  "A list of trigger functions that have run later than their output
+handlers.")
+
+(defun in-gdb-instance-context (instance form)
+  "Funcall `form' in the gud buffer of `instance'"
+  (save-excursion
+    (set-buffer (gdb-get-instance-buffer instance 'gud))
+    (funcall form)))
+
+;; end of instance vars
+
+;;
+;; finding instances
+;;
+
+(defun gdb-proc->instance (proc)
+  (save-excursion
+    (set-buffer (process-buffer proc))
+    gdb-buffer-instance))
+
+(defun gdb-mru-instance-buffer ()
+  "Return the most recently used (non-auxiliary) gdb gud buffer."
+  (save-excursion
+    (gdb-goto-first-gdb-instance (buffer-list))))
+
+(defun gdb-goto-first-gdb-instance (blist)
+  "Use gdb-mru-instance-buffer -- not this."
+  (and blist
+       (progn
+	 (set-buffer (car blist))
+	 (or (and gdb-buffer-instance
+		  (eq gdb-buffer-type 'gud)
+		  (car blist))
+	     (gdb-goto-first-gdb-instance (cdr blist))))))
+
+(defun buffer-gdb-instance (buf)
+  (save-excursion
+    (set-buffer buf)
+    gdb-buffer-instance))
+
+(defun gdb-needed-default-instance ()
+  "Return the most recently used gdb instance or signal an error."
+  (let ((buffer (gdb-mru-instance-buffer)))
+    (or (and buffer (buffer-gdb-instance buffer))
+	(error "No instance of gdb found."))))
+
+(defun gdb-instance-target-string (instance)
+  "The apparent name of the program being debugged by a gdb instance.
+For sure this the root string used in smashing together the gud 
+buffer's name, even if that doesn't happen to be the name of a 
+program."
+  (in-gdb-instance-context
+   instance
+   (function (lambda () gud-target-name))))
+
+
+
+;;
+;; Instance Buffers.
+;;
+
+;; More than one buffer can be associated with a gdb instance.
+;;
+;; Each buffer has a TYPE -- a symbol that identifies the function
+;; of that particular buffer.
+;;
+;; The usual gud interaction buffer is given the type `gud' and
+;; is constructed specially.  
+;;
+;; Others are constructed by gdb-get-create-instance-buffer and 
+;; named according to the rules set forth in the gdb-instance-buffer-rules-assoc
+
+(defun gdb-get-instance-buffer (instance key)
+  "Return the instance buffer for `instance' tagged with type `key'.
+The key should be one of the cars in `gdb-instance-buffer-rules-assoc'."
+  (save-excursion
+    (gdb-look-for-tagged-buffer instance key (buffer-list))))
+
+(defun gdb-get-create-instance-buffer (instance key)
+  "Create a new gdb instance buffer of the type specified by `key'.
+The key should be one of the cars in `gdb-instance-buffer-rules-assoc'."
+  (or (gdb-get-instance-buffer instance key)
+      (let* ((rules (assoc key gdb-instance-buffer-rules-assoc))
+	     (name (funcall (gdb-rules-name-maker rules) instance))
+	     (new (get-buffer-create name)))
+	(save-excursion
+	  (set-buffer new)
+	  (make-variable-buffer-local 'gdb-buffer-type)
+	  (setq gdb-buffer-type key)
+	  (make-variable-buffer-local 'gdb-buffer-instance)
+	  (setq gdb-buffer-instance instance)
+	  (if (cdr (cdr rules))
+	      (funcall (car (cdr (cdr rules)))))
+	  new))))
+
+(defun gdb-rules-name-maker (rules) (car (cdr rules)))
+
+(defun gdb-look-for-tagged-buffer (instance key bufs)
+  (let ((retval nil))
+    (while (and (not retval) bufs)
+      (set-buffer (car bufs))
+      (if (and (eq gdb-buffer-instance instance)
+	       (eq gdb-buffer-type key))
+	  (setq retval (car bufs)))
+      (setq bufs (cdr bufs))
+      )
+    retval))
+
+(defun gdb-instance-buffer-p (buf)
+  (save-excursion
+    (set-buffer buf)
+    (and gdb-buffer-type
+	 (not (eq gdb-buffer-type 'gud)))))
+
+;;
+;; This assoc maps buffer type symbols to rules.  Each rule is a list of
+;; at least one and possible more functions.  The functions have these
+;; roles in defining a buffer type:
+;;
+;;     NAME - take an instance, return a name for this type buffer for that 
+;;	      instance.
+;; The remaining function(s) are optional:
+;;
+;;     MODE - called in new new buffer with no arguments, should establish
+;;	      the proper mode for the buffer.
+;;
+
+(defvar gdb-instance-buffer-rules-assoc '())
+
+(defun gdb-set-instance-buffer-rules (buffer-type &rest rules)
+  (let ((binding (assoc buffer-type gdb-instance-buffer-rules-assoc)))
+    (if binding
+	(setcdr binding rules)
+      (setq gdb-instance-buffer-rules-assoc
+	    (cons (cons buffer-type rules)
+		  gdb-instance-buffer-rules-assoc)))))
+
+(gdb-set-instance-buffer-rules 'gud 'error) ; gud buffers are an exception to the rules
+
+;;
+;; partial-output buffers
+;;
+;; These accumulate output from a command executed on
+;; behalf of emacs (rather than the user).  
+;;
+
+(gdb-set-instance-buffer-rules 'gdb-partial-output-buffer
+			       'gdb-partial-output-name)
+
+(defun gdb-partial-output-name (instance)
+  (concat "*partial-output-"
+	  (gdb-instance-target-string instance)
+	  "*"))
+
+
+(gdb-set-instance-buffer-rules 'gdb-inferior-io
+			       'gdb-inferior-io-name
+			       'gud-inferior-io-mode)
+
+(defun gdb-inferior-io-name (instance)
+  (concat "*input/output of "
+	  (gdb-instance-target-string instance)
+	  "*"))
+
+(defvar gdb-inferior-io-mode-map (copy-keymap comint-mode-map))
+(define-key comint-mode-map "\C-c\C-c" 'gdb-inferior-io-interrupt)
+(define-key comint-mode-map "\C-c\C-z" 'gdb-inferior-io-stop)
+(define-key comint-mode-map "\C-c\C-\\" 'gdb-inferior-io-quit)
+(define-key comint-mode-map "\C-c\C-d" 'gdb-inferior-io-eof)
+
+(defun gud-inferior-io-mode ()
+  "Major mode for gud inferior-io.
+
+\\{comint-mode-map}"
+  ;; We want to use comint because it has various nifty and familiar
+  ;; features.  We don't need a process, but comint wants one, so create
+  ;; a dummy one.
+  (make-comint (substring (buffer-name) 1 (- (length (buffer-name)) 1))
+	       "/bin/cat")
+  (setq major-mode 'gud-inferior-io-mode)
+  (setq mode-name "Debuggee I/O")
+  (setq comint-input-sender 'gud-inferior-io-sender)
+)
+
+(defun gud-inferior-io-sender (proc string)
+  (save-excursion
+    (set-buffer (process-buffer proc))
+    (let ((instance gdb-buffer-instance))
+      (set-buffer (gdb-get-instance-buffer instance 'gud))
+      (let ((gud-proc (get-buffer-process (current-buffer))))
+	(process-send-string gud-proc string)
+	(process-send-string gud-proc "\n")
+    ))
+    ))
+
+(defun gdb-inferior-io-interrupt (instance)
+  "Interrupt the program being debugged."
+  (interactive (list (gdb-needed-default-instance)))
+  (interrupt-process
+   (get-buffer-process (gdb-get-instance-buffer instance 'gud)) comint-ptyp))
+
+(defun gdb-inferior-io-quit (instance)
+  "Send quit signal to the program being debugged."
+  (interactive (list (gdb-needed-default-instance)))
+  (quit-process
+   (get-buffer-process (gdb-get-instance-buffer instance 'gud)) comint-ptyp))
+
+(defun gdb-inferior-io-stop (instance)
+  "Stop the program being debugged."
+  (interactive (list (gdb-needed-default-instance)))
+  (stop-process
+   (get-buffer-process (gdb-get-instance-buffer instance 'gud)) comint-ptyp))
+
+(defun gdb-inferior-io-eof (instance)
+  "Send end-of-file to the program being debugged."
+  (interactive (list (gdb-needed-default-instance)))
+  (process-send-eof
+   (get-buffer-process (gdb-get-instance-buffer instance 'gud))))
+
+
+;;
+;; gdb communications
+;;
+
+;; INPUT: things sent to gdb
+;;
+;; Each instance has a high and low priority 
+;; input queue.  Low priority input is sent only 
+;; when the high priority queue is idle.
+;;
+;; The queues are lists.  Each element is either 
+;; a string (indicating user or user-like input)
+;; or a list of the form:
+;;
+;;    (INPUT-STRING  HANDLER-FN)
+;;
+;;
+;; The handler function will be called from the 
+;; partial-output buffer when the command completes.
+;; This is the way to write commands which 
+;; invoke gdb commands autonomously.
+;;
+;; These lists are consumed tail first.
+;;
+
+(defun gdb-send (proc string)
+  "A comint send filter for gdb.
+This filter may simply queue output for a later time."
+  (let ((instance (gdb-proc->instance proc)))
+    (gdb-instance-enqueue-input instance (concat string "\n"))))
+
+;; Note: Stuff enqueued here will be sent to the next prompt, even if it
+;; is a query, or other non-top-level prompt.  To guarantee stuff will get
+;; sent to the top-level prompt, currently it must be put in the idle queue.
+;;				 ^^^^^^^^^
+;; [This should encourage gud extentions that invoke gdb commands to let
+;;  the user go first; it is not a bug.     -t]
+;;
+
+(defun gdb-instance-enqueue-input (instance item)
+  (if (gdb-instance-prompting instance)
+      (progn
+	(gdb-send-item instance item)
+	(set-gdb-instance-prompting instance nil))
+    (set-gdb-instance-input-queue
+     instance
+     (cons item (gdb-instance-input-queue instance)))))
+
+(defun gdb-instance-dequeue-input (instance)
+  (let ((queue (gdb-instance-input-queue instance)))
+    (and queue
+       (if (not (cdr queue))
+	   (let ((answer (car queue)))
+	     (set-gdb-instance-input-queue instance '())
+	     answer)
+	 (gdb-take-last-elt queue)))))
+
+(defun gdb-instance-enqueue-idle-input (instance item)
+  (if (and (gdb-instance-prompting instance)
+	   (not (gdb-instance-input-queue instance)))
+      (progn
+	(gdb-send-item instance item)
+	(set-gdb-instance-prompting instance nil))
+    (set-gdb-instance-idle-input-queue
+     instance
+     (cons item (gdb-instance-idle-input-queue instance)))))
+
+(defun gdb-instance-dequeue-idle-input (instance)
+  (let ((queue (gdb-instance-idle-input-queue instance)))
+    (and queue
+       (if (not (cdr queue))
+	   (let ((answer (car queue)))
+	     (set-gdb-instance-idle-input-queue instance '())
+	     answer)
+	 (gdb-take-last-elt queue)))))
+
+; Don't use this in general.
+(defun gdb-take-last-elt (l)
+  (if (cdr (cdr l))
+      (gdb-take-last-elt (cdr l))
+    (let ((answer (car (cdr l))))
+      (setcdr l '())
+      answer)))
+
+
+;;
+;; output -- things gdb prints to emacs
+;;
+;; GDB output is a stream interrupted by annotations.
+;; Annotations can be recognized by their beginning
+;; with \C-j\C-z\C-z<tag><opt>\C-j
+;;
+;; The tag is a string obeying symbol syntax.
+;;
+;; The optional part `<opt>' can be either the empty string
+;; or a space followed by more data relating to the annotation.
+;; For example, the SOURCE annotation is followed by a filename,
+;; line number and various useless goo.  This data must not include
+;; any newlines.
+;;
+
+
+(defun gud-gdb-marker-filter (string)
+  "A gud marker filter for gdb."
+  ;; Bogons don't tell us the process except through scoping crud.
+  (let ((instance (gdb-proc->instance proc)))
+    (gdb-output-burst instance string)))
+
+(defvar gdb-annotation-rules
+  '(("frames-invalid" gdb-invalidate-frames)
+    ("breakpoints-invalid" gdb-invalidate-breakpoints)
+    ("pre-prompt" gdb-pre-prompt)
+    ("prompt" gdb-prompt)
+    ("commands" gdb-subprompt)
+    ("overload-choice" gdb-subprompt)
+    ("query" gdb-subprompt)
+    ("prompt-for-continue" gdb-subprompt)
+    ("post-prompt" gdb-post-prompt)
+    ("source" gdb-source)
+    ("starting" gdb-starting)
+    ("exited" gdb-stopping)
+    ("signalled" gdb-stopping)
+    ("signal" gdb-stopping)
+    ("breakpoint" gdb-stopping)
+    ("watchpoint" gdb-stopping)
+    ("stopped" gdb-stopped)
+    )
+  "An assoc mapping annotation tags to functions which process them.")
+
+
+(defun gdb-ignore-annotation (instance args)
+  nil)
+
+(defconst gdb-source-spec-regexp
+  "\\(.*\\):\\([0-9]*\\):[0-9]*:[a-z]*:0x[a-f0-9]*")
+
+;; Do not use this except as an annotation handler."
+(defun gdb-source (instance args)
+  (string-match gdb-source-spec-regexp args)
+  ;; Extract the frame position from the marker.
+  (setq gud-last-frame
+	(cons
+	 (substring args (match-beginning 1) (match-end 1))
+	 (string-to-int (substring args
+				   (match-beginning 2)
+				   (match-end 2))))))
+
+;; An annotation handler for `prompt'.
+;; This sends the next command (if any) to gdb.
+(defun gdb-prompt (instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'user) t)
+     ((eq sink 'post-emacs)
+      (set-gdb-instance-output-sink instance 'user))
+     (t
+      (set-gdb-instance-output-sink instance 'user)
+      (error "Phase error in gdb-prompt (got %s)" sink))))
+  (let ((highest (gdb-instance-dequeue-input instance)))
+    (if highest
+	(gdb-send-item instance highest)
+      (let ((lowest (gdb-instance-dequeue-idle-input instance)))
+	(if lowest
+	    (gdb-send-item instance lowest)
+	  (progn
+	    (set-gdb-instance-prompting instance t)
+	    (gud-display-frame)))))))
+
+;; An annotation handler for non-top-level prompts.
+(defun gdb-subprompt (instance ignored)
+  (let ((highest (gdb-instance-dequeue-input instance)))
+    (if highest
+	(gdb-send-item instance highest)
+      (set-gdb-instance-prompting instance t))))
+
+(defun gdb-send-item (instance item)
+  (set-gdb-instance-current-item instance item)
+  (if (stringp item)
+      (progn
+	(set-gdb-instance-output-sink instance 'user)
+	(process-send-string (gdb-instance-process instance)
+			     item))
+    (progn
+      (gdb-clear-partial-output instance)
+      (set-gdb-instance-output-sink instance 'pre-emacs)
+      (process-send-string (gdb-instance-process instance)
+			   (car item)))))
+
+;; An annotation handler for `pre-prompt'.
+;; This terminates the collection of output from a previous
+;; command if that happens to be in effect.
+(defun gdb-pre-prompt (instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'user) t)
+     ((eq sink 'emacs)
+      (set-gdb-instance-output-sink instance 'post-emacs)
+      (let ((handler
+	     (car (cdr (gdb-instance-current-item instance)))))
+	(save-excursion
+	  (set-buffer (gdb-get-create-instance-buffer
+		       instance 'gdb-partial-output-buffer))
+	  (funcall handler))))
+     (t
+      (set-gdb-instance-output-sink instance 'user)
+      (error "Output sink phase error 1.")))))
+
+;; An annotation handler for `starting'.  This says that I/O for the subprocess
+;; is now the program being debugged, not GDB.
+(defun gdb-starting (instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'user)
+      (set-gdb-instance-output-sink instance 'inferior)
+      ;; FIXME: need to send queued input
+      )
+     (t (error "Unexpected `starting' annotation")))))
+
+;; An annotation handler for `exited' and other annotations which say that
+;; I/O for the subprocess is now GDB, not the program being debugged.
+(defun gdb-stopping (instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'inferior)
+      (set-gdb-instance-output-sink instance 'user)
+      )
+     (t (error "Unexpected stopping annotation")))))
+
+;; An annotation handler for `stopped'.  It is just like gdb-stopping, except
+;; that if we already set the output sink to 'user in gdb-stopping, that is 
+;; fine.
+(defun gdb-stopped (instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'inferior)
+      (set-gdb-instance-output-sink instance 'user)
+      )
+     ((eq sink 'user)
+      t)
+     (t (error "Unexpected stopping annotation")))))
+
+;; An annotation handler for `post-prompt'.
+;; This begins the collection of output from the current
+;; command if that happens to be appropriate."
+(defun gdb-post-prompt (instance ignored)
+  (gdb-invalidate-registers instance ignored)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'user) t)
+     ((eq sink 'pre-emacs)
+      (set-gdb-instance-output-sink instance 'emacs))
+
+     (t
+      (set-gdb-instance-output-sink instance 'user)
+      (error "Output sink phase error 3.")))))
+
+;; Handle a burst of output from a gdb instance.
+;; This function is (indirectly) used as a gud-marker-filter.
+;; It must return output (if any) to be insterted in the gud 
+;; buffer.
+
+(defun gdb-output-burst (instance string)
+  "Handle a burst of output from a gdb instance.
+This function is (indirectly) used as a gud-marker-filter.
+It must return output (if any) to be insterted in the gud 
+buffer."
+
+  (save-match-data
+    (let (
+	  ;; Recall the left over burst from last time
+	  (burst (concat (gdb-instance-burst instance) string))
+	  ;; Start accumulating output for the gud buffer
+	  (output ""))
+
+      ;; Process all the complete markers in this chunk.
+
+      (while (string-match "\n\032\032\\(.*\\)\n" burst)
+	(let ((annotation (substring burst
+				     (match-beginning 1)
+				     (match-end 1))))
+	    
+	  ;; Stuff prior to the match is just ordinary output.
+	  ;; It is either concatenated to OUTPUT or directed
+	  ;; elsewhere.
+	  (setq output
+		(gdb-concat-output
+		 instance
+		 output
+		 (substring burst 0 (match-beginning 0))))
+
+	  ;; Take that stuff off the burst.
+	  (setq burst (substring burst (match-end 0)))
+	    
+	  ;; Parse the tag from the annotation, and maybe its arguments.
+	  (string-match "\\(\\S-*\\) ?\\(.*\\)" annotation)
+	  (let* ((annotation-type (substring annotation
+					     (match-beginning 1)
+					     (match-end 1)))
+		 (annotation-arguments (substring annotation
+						  (match-beginning 2)
+						  (match-end 2)))
+		 (annotation-rule (assoc annotation-type
+					 gdb-annotation-rules)))
+	    ;; Call the handler for this annotation.
+	    (if annotation-rule
+		(funcall (car (cdr annotation-rule))
+			 instance
+			 annotation-arguments)
+	      ;; Else the annotation is not recognized.  Ignore it silently,
+	      ;; so that GDB can add new annotations without causing
+	      ;; us to blow up.
+	      ))))
+
+
+      ;; Does the remaining text end in a partial line?
+      ;; If it does, then keep part of the burst until we get more.
+      (if (string-match "\n\\'\\|\n\032\\'\\|\n\032\032.*\\'"
+			burst)
+	  (progn
+	    ;; Everything before the potential marker start can be output.
+	    (setq output
+		  (gdb-concat-output
+		   instance
+		   output
+		   (substring burst 0 (match-beginning 0))))
+
+	    ;; Everything after, we save, to combine with later input.
+	    (setq burst (substring burst (match-beginning 0))))
+
+	;; In case we know the burst contains no partial annotations:
+	(progn
+	  (setq output (gdb-concat-output instance output burst))
+	  (setq burst "")))
+
+      ;; Save the remaining burst for the next call to this function.
+      (set-gdb-instance-burst instance burst)
+      output)))
+
+(defun gdb-concat-output (instance so-far new)
+  (let ((sink (gdb-instance-output-sink instance)))
+    (cond
+     ((eq sink 'user) (concat so-far new))
+     ((or (eq sink 'pre-emacs) (eq sink 'post-emacs)) so-far)
+     ((eq sink 'emacs)
+      (gdb-append-to-partial-output instance new)
+      so-far)
+     ((eq sink 'inferior)
+      (gdb-append-to-inferior-io instance new)
+      so-far)
+     (t (error "Bogon output sink %S" sink)))))
+
+(defun gdb-append-to-partial-output (instance string)
+  (save-excursion
+    (set-buffer
+     (gdb-get-create-instance-buffer
+      instance 'gdb-partial-output-buffer))
+    (goto-char (point-max))
+    (insert string)))
+
+(defun gdb-clear-partial-output (instance)
+  (save-excursion
+    (set-buffer
+     (gdb-get-create-instance-buffer
+      instance 'gdb-partial-output-buffer))
+    (delete-region (point-min) (point-max))))
+
+(defun gdb-append-to-inferior-io (instance string)
+  (save-excursion
+    (set-buffer
+     (gdb-get-create-instance-buffer
+      instance 'gdb-inferior-io))
+    (goto-char (point-max))
+    (insert-before-markers string))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance
+				   'gdb-inferior-io)))
+
+(defun gdb-clear-inferior-io (instance)
+  (save-excursion
+    (set-buffer
+     (gdb-get-create-instance-buffer
+      instance 'gdb-inferior-io))
+    (delete-region (point-min) (point-max))))
+
+
+
+;; One trick is to have a command who's output is always available in
+;; a buffer of it's own, and is always up to date.  We build several 
+;; buffers of this type.
+;;
+;; There are two aspects to this: gdb has to tell us when the output
+;; for that command might have changed, and we have to be able to run
+;; the command behind the user's back.
+;;
+;; The idle input queue and the output phasing associated with 
+;; the instance variable `(gdb-instance-output-sink instance)' help
+;; us to run commands behind the user's back.
+;; 
+;; Below is the code for specificly managing buffers of output from one 
+;; command.
+;;
+
+
+;; The trigger function is suitable for use in the assoc GDB-ANNOTATION-RULES
+;; It adds an idle input for the command we are tracking.  It should be the
+;; annotation rule binding of whatever gdb sends to tell us this command
+;; might have changed it's output.
+;;
+;; NAME is the fucntion name.  DEMAND-PREDICATE tests if output is really needed.
+;; GDB-COMMAND is a string of such.  OUTPUT-HANDLER is the function bound to the
+;; input in the input queue (see comment about ``gdb communications'' above).
+(defmacro def-gdb-auto-update-trigger (name demand-predicate gdb-command output-handler)
+  (`
+   (defun (, name) (instance &optional ignored)
+     (if (and ((, demand-predicate) instance)
+	      (not (member '(, name)
+			   (gdb-instance-pending-triggers instance))))
+	 (progn
+	   (gdb-instance-enqueue-idle-input
+	    instance
+	    (list (, gdb-command) '(, output-handler)))
+	   (set-gdb-instance-pending-triggers
+	    instance
+	    (cons '(, name)
+		  (gdb-instance-pending-triggers instance))))))))
+		
+(defmacro def-gdb-auto-update-handler (name trigger buf-key)
+  (`
+   (defun (, name) ()
+     (set-gdb-instance-pending-triggers
+      instance
+      (delq '(, trigger)
+	    (gdb-instance-pending-triggers instance)))
+     (let ((buf (gdb-get-instance-buffer instance
+					  '(, buf-key))))
+       (and buf
+	    (save-excursion
+	      (set-buffer buf)
+	      (let ((p (point))
+		    (buffer-read-only nil))
+		(delete-region (point-min) (point-max))
+		(insert-buffer (gdb-get-create-instance-buffer
+				instance
+				'gdb-partial-output-buffer))
+		(goto-char p))))))))
+
+(defmacro def-gdb-auto-updated-buffer
+  (buffer-key trigger-name gdb-command output-handler-name)
+  (`
+   (progn
+     (def-gdb-auto-update-trigger (, trigger-name)
+       ;; The demand predicate:
+       (lambda (instance)
+	 (gdb-get-instance-buffer instance '(, buffer-key)))
+       (, gdb-command)
+       (, output-handler-name))
+     (def-gdb-auto-update-handler (, output-handler-name)
+       (, trigger-name) (, buffer-key)))))
+
+
+
+;;
+;; Breakpoint buffers
+;; 
+;; These display the output of `info breakpoints'.
+;;
+
+       
+(gdb-set-instance-buffer-rules 'gdb-breakpoints-buffer
+			       'gdb-breakpoints-buffer-name
+			       'gud-breakpoints-mode)
+
+(def-gdb-auto-updated-buffer gdb-breakpoints-buffer
+  ;; This defines the auto update rule for buffers of type
+  ;; `gdb-breakpoints-buffer'.
+  ;;
+  ;; It defines a function to serve as the annotation handler that
+  ;; handles the `foo-invalidated' message.  That function is called:
+  gdb-invalidate-breakpoints
+
+  ;; To update the buffer, this command is sent to gdb.
+  "server info breakpoints\n"
+
+  ;; This also defines a function to be the handler for the output
+  ;; from the command above.  That function will copy the output into
+  ;; the appropriately typed buffer.  That function will be called:
+  gdb-info-breakpoints-handler)
+
+(defun gdb-breakpoints-buffer-name (instance)
+  (save-excursion
+    (set-buffer (process-buffer (gdb-instance-process instance)))
+    (concat "*breakpoints of " (gdb-instance-target-string instance) "*")))
+
+(defun gud-display-breakpoints-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-breakpoints-buffer)))
+
+(defun gud-frame-breakpoints-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-frame-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-breakpoints-buffer)))
+
+(defvar gud-breakpoints-mode-map nil)
+(setq gud-breakpoints-mode-map (make-keymap))
+(suppress-keymap gud-breakpoints-mode-map)
+(define-key gud-breakpoints-mode-map " " 'gud-toggle-bp-this-line)
+(define-key gud-breakpoints-mode-map "d" 'gud-delete-bp-this-line)
+
+(defun gud-breakpoints-mode ()
+  "Major mode for gud breakpoints.
+
+\\{gud-breakpoints-mode-map}"
+  (setq major-mode 'gud-breakpoints-mode)
+  (setq mode-name "Breakpoints")
+  (use-local-map gud-breakpoints-mode-map)
+  (setq buffer-read-only t)
+  (gdb-invalidate-breakpoints gdb-buffer-instance))
+
+(defun gud-toggle-bp-this-line ()
+  (interactive)
+  (save-excursion
+    (beginning-of-line 1)
+    (if (not (looking-at "\\([0-9]*\\)\\s-*\\S-*\\s-*\\S-*\\s-*\\(.\\)"))
+	(error "Not recognized as breakpoint line (demo foo).")
+      (gdb-instance-enqueue-idle-input
+       gdb-buffer-instance
+       (list
+	(concat
+	 (if (eq ?y (char-after (match-beginning 2)))
+	     "server disable "
+	   "server enable ")
+	 (buffer-substring (match-beginning 0)
+			   (match-end 1))
+	 "\n")
+	'(lambda () nil)))
+      )))
+
+(defun gud-delete-bp-this-line ()
+  (interactive)
+  (save-excursion
+    (beginning-of-line 1)
+    (if (not (looking-at "\\([0-9]*\\)\\s-*\\S-*\\s-*\\S-*\\s-*\\(.\\)"))
+	(error "Not recognized as breakpoint line (demo foo).")
+      (gdb-instance-enqueue-idle-input
+       gdb-buffer-instance
+       (list
+	(concat
+	 "server delete "
+	 (buffer-substring (match-beginning 0)
+			   (match-end 1))
+	 "\n")
+	'(lambda () nil)))
+      )))
+
+
+
+
+;;
+;; Frames buffers.  These display a perpetually correct bactracktrace
+;; (from the command `where').
+;;
+;; Alas, if your stack is deep, they are costly.
+;;
+
+(gdb-set-instance-buffer-rules 'gdb-stack-buffer
+			       'gdb-stack-buffer-name
+			       'gud-frames-mode)
+
+(def-gdb-auto-updated-buffer gdb-stack-buffer
+  gdb-invalidate-frames
+  "server where\n"
+  gdb-info-frames-handler)
+
+(defun gdb-stack-buffer-name (instance)
+  (save-excursion
+    (set-buffer (process-buffer (gdb-instance-process instance)))
+    (concat "*stack frames of "
+	    (gdb-instance-target-string instance) "*")))
+
+(defun gud-display-stack-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-stack-buffer)))
+
+(defun gud-frame-stack-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-frame-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-stack-buffer)))
+
+(defvar gud-frames-mode-map nil)
+(setq gud-frames-mode-map (make-keymap))
+(suppress-keymap gud-frames-mode-map)
+(define-key gud-frames-mode-map [mouse-2]
+  'gud-frames-select-by-mouse)
+
+(defun gud-frames-mode ()
+  "Major mode for gud frames.
+
+\\{gud-frames-mode-map}"
+  (setq major-mode 'gud-frames-mode)
+  (setq mode-name "Frames")
+  (setq buffer-read-only t)
+  (use-local-map gud-frames-mode-map)
+  (gdb-invalidate-frames gdb-buffer-instance))
+
+(defun gud-get-frame-number ()
+  (save-excursion
+    (let* ((pos (re-search-backward "^#\\([0-9]*\\)" nil t))
+	   (n (or (and pos
+		       (string-to-int
+			(buffer-substring (match-beginning 1)
+					  (match-end 1))))
+		  0)))
+      n)))
+
+(defun gud-frames-select-by-mouse (e)
+  (interactive "e")
+  (let (selection)
+    (save-excursion
+      (set-buffer (window-buffer (posn-window (event-end e))))
+      (save-excursion
+	(goto-char (posn-point (event-end e)))
+	(setq selection (gud-get-frame-number))))
+    (select-window (posn-window (event-end e)))
+    (save-excursion
+      (set-buffer (gdb-get-instance-buffer (gdb-needed-default-instance) 'gud))
+      (gud-call "fr %p" selection)
+      (gud-display-frame))))
+
+
+;;
+;; Registers buffers
+;;
+
+(def-gdb-auto-updated-buffer gdb-registers-buffer
+  gdb-invalidate-registers
+  "server info registers\n"
+  gdb-info-registers-handler)
+
+(gdb-set-instance-buffer-rules 'gdb-registers-buffer
+			       'gdb-registers-buffer-name
+			       'gud-registers-mode)
+
+(defvar gud-registers-mode-map nil)
+(setq gud-registers-mode-map (make-keymap))
+(suppress-keymap gud-registers-mode-map)
+
+(defun gud-registers-mode ()
+  "Major mode for gud registers.
+
+\\{gud-registers-mode-map}"
+  (setq major-mode 'gud-registers-mode)
+  (setq mode-name "Registers")
+  (setq buffer-read-only t)
+  (use-local-map gud-registers-mode-map)
+  (gdb-invalidate-registers gdb-buffer-instance))
+
+(defun gdb-registers-buffer-name (instance)
+  (save-excursion
+    (set-buffer (process-buffer (gdb-instance-process instance)))
+    (concat "*registers of " (gdb-instance-target-string instance) "*")))
+
+(defun gud-display-registers-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-registers-buffer)))
+
+(defun gud-frame-registers-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-frame-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-registers-buffer)))
+
+
+
+;;;; Menu windows:
+
+
+;; MENU-LIST is ((option option option...) (option option ...)...)
+;; 
+(defun gud-display-menu (menu-list)
+  (setq fill-column (min 120 (- (window-width)
+				(min 8 (window-width)))))
+  (while menu-list
+    (mapcar (function (lambda (x) (insert (symbol-name x) " "))) (car menu-list))
+    (fill-paragraph nil)
+    (insert "\n\n")
+    (setq menu-list (cdr menu-list)))
+  (goto-char (point-min))
+  (while (re-search-forward "\\([^ \n]+\\)\\(\n\\| \\)" nil t)
+    (put-text-property (match-beginning 1) (match-end 1)
+		       'mouse-face 'highlight))
+  (goto-char (point-min)))
+
+(defun gud-goto-menu (menu)
+  (setq gud-menu-position menu)
+  (let ((buffer-read-only nil))
+    (delete-region (point-min) (point-max))
+    (gud-display-menu menu)))
+
+(defun gud-menu-pick (event)
+  "Choose an item from a gdb command menu."
+  (interactive "e")
+  (let (choice)
+    (save-excursion
+      (set-buffer (window-buffer (posn-window (event-start event))))
+      (goto-char (posn-point (event-start event)))
+      (let (beg end)
+	(skip-chars-forward "^ \t\n")
+	(setq end (point))
+	(skip-chars-backward "^ \t\n")
+	(setq beg (point))
+	(setq choice (buffer-substring beg end))
+	(message choice)
+	(gud-invoke-menu (intern choice))))))
+
+(defun gud-invoke-menu (symbol)
+  (let ((meaning (assoc symbol gud-menu-rules)))
+    (cond
+     ((and (consp meaning)
+	   (consp (car (cdr meaning))))
+      (gud-goto-menu (car (cdr meaning))))
+     (meaning (call-interactively (car (cdr meaning)))))))
+
+
+
+(gdb-set-instance-buffer-rules 'gdb-command-buffer
+			       'gdb-command-buffer-name
+			       'gud-command-mode)
+
+(defvar gud-command-mode-map nil)
+(setq gud-command-mode-map (make-keymap))
+(suppress-keymap gud-command-mode-map)
+(define-key gud-command-mode-map [mouse-2] 'gud-menu-pick)
+
+(defun gud-command-mode ()
+  "Major mode for gud menu.
+
+\\{gud-command-mode-map}" (interactive) (setq major-mode 'gud-command-mode)
+  (setq mode-name "Menu") (setq buffer-read-only t) (use-local-map
+  gud-command-mode-map) (make-variable-buffer-local 'gud-menu-position)
+  (if (not gud-menu-position) (gud-goto-menu gud-running-menu)))
+
+(defun gdb-command-buffer-name (instance)
+  (save-excursion
+    (set-buffer (process-buffer (gdb-instance-process instance)))
+    (concat "*menu of " (gdb-instance-target-string instance) "*")))
+
+(defun gud-display-command-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance
+				   'gdb-command-buffer)
+   6))
+
+(defun gud-frame-command-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-frame-buffer
+   (gdb-get-create-instance-buffer instance
+				    'gdb-command-buffer)))
+
+(defvar gud-selected-menu-titles ())
+(setq gud-selected-menu-titles 
+      '(RUNNING STACK DATA BREAKPOINTS FILES))  
+
+(setq gud-running-menu
+  (list
+   '(RUNNING stack breakpoints files)
+   '(target run next step continue finish stepi kill help-running)))
+  
+(setq gud-stack-menu
+  (list
+   '(running STACK breakpoints files)
+   '(up down frame backtrace return help-stack)))
+  
+(setq gud-data-menu
+  (list
+   '(running stack DATA breakpoints files)
+   '(whatis ptype print set display undisplay disassemble help-data)))
+
+(setq gud-breakpoints-menu
+  (list
+   '(running stack BREAKPOINTS files)
+   '(awatch rwatch watch break delete enable disable condition ignore help-breakpoints)))
+  
+(setq gud-files-menu
+  (list
+   '(running stack breakpoints FILES)
+   '(file core-file help-files)
+   '(exec-file load symbol-file add-symbol-file sharedlibrary)))
+
+(setq gud-menu-rules
+      (list
+       (list 'running gud-running-menu)
+       (list 'RUNNING gud-running-menu)
+       (list 'stack gud-stack-menu)
+       (list 'STACK gud-stack-menu)
+       (list 'data gud-data-menu)
+       (list 'DATA gud-data-menu)
+       (list 'breakpoints gud-breakpoints-menu)
+       (list 'BREAKPOINTS gud-breakpoints-menu)
+       (list 'files gud-files-menu)
+       (list 'FILES gud-files-menu)
+
+       (list 'target 'gud-target)
+       (list 'kill 'gud-kill)
+       (list 'stepi 'gud-stepi)
+       (list 'step 'gud-step)
+       (list 'next 'gud-next)
+       (list 'finish 'gud-finish)
+       (list 'continue 'gud-cont)
+       (list 'run 'gud-run)
+
+       (list 'backtrace 'gud-backtrace)
+       (list 'frame 'gud-frame)
+       (list 'down 'gud-down)
+       (list 'up 'gud-up)
+       (list 'return 'gud-return)
+
+       (list 'file 'gud-file)
+       (list 'core-file 'gud-core-file)
+       (list 'cd 'gud-cd)
+
+       (list 'exec-file 'gud-exec-file)
+       (list 'load 'gud-load)
+       (list 'symbol-file 'gud-symbol-file)
+       (list 'add-symbol-file 'gud-add-symbol-file)
+       (list 'sharedlibrary 'gud-sharedlibrary)
+       ))
+       
+
+
+
+(defun gdb-call-showing-gud (instance command)
+  (gud-display-gud-buffer instance)
+  (comint-input-sender (gdb-instance-process instance) command))
+
+(defvar gud-target-history ())
+
+(defun gud-temp-buffer-show (buf)
+  (let ((ow (selected-window)))
+    (unwind-protect
+	(progn
+	  (pop-to-buffer buf)
+
+	  ;; This insertion works around a bug in emacs.
+	  ;; The bug is that all the empty space after a
+	  ;; highlighted word that terminates a buffer
+	  ;; gets highlighted.  That's really ugly, so
+	  ;; make sure a highlighted word can't ever
+	  ;; terminate the buffer.
+	  (goto-char (point-max))
+	  (insert "\n")
+	  (goto-char (point-min))
+
+	  (if (< (window-height) 10)
+	      (enlarge-window (- 10 (window-height)))))
+      (select-window ow))))
+
+(defun gud-target (instance command)
+  (interactive 
+   (let* ((instance (gdb-needed-default-instance))
+	  (temp-buffer-show-function (function gud-temp-buffer-show))
+	  (target-name (completing-read (format "Target type: ")
+					'(("remote")
+					  ("core")
+					  ("child")
+					  ("exec"))
+					nil
+					t
+					nil
+					'gud-target-history)))
+     (list instance
+	   (cond
+	    ((equal target-name "child") "run")
+
+	    ((equal target-name "core")
+	     (concat "target core "
+		     (read-file-name "core file: "
+				     nil
+				     "core"
+				     t)))
+
+	    ((equal target-name "exec")
+	     (concat "target exec "
+		     (read-file-name "exec file: "
+				     nil
+				     "a.out"
+				     t)))
+
+	    ((equal target-name "remote")
+	     (concat "target remote "
+		     (read-file-name "serial line for remote: "
+				     "/dev/"
+				     "ttya"
+				     t)))
+
+	    (t "echo No such target command!")))))
+
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+(defun gud-backtrace ()
+  (interactive)
+  (let ((instance  (gdb-needed-default-instance)))
+    (gud-display-gud-buffer instance)
+    (apply comint-input-sender
+	   (list (gdb-instance-process instance)
+		 "backtrace"))))
+
+(defun gud-frame ()
+  (interactive)
+  (let ((instance  (gdb-needed-default-instance)))
+    (apply comint-input-sender
+	   (list (gdb-instance-process instance)
+		 "frame"))))
+
+(defun gud-return (instance command)
+   (interactive
+    (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+      (list (gdb-needed-default-instance)
+	    (concat "return " (read-string "Expression to return: ")))))
+   (gud-display-gud-buffer instance)
+   (apply comint-input-sender
+	  (list (gdb-instance-process instance) command)))
+
+
+(defun gud-file (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "file " (read-file-name "Executable to debug: "
+					   nil
+					   "a.out"
+					   t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+(defun gud-core-file (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "core " (read-file-name "Core file to debug: "
+					   nil
+					   "core-file"
+					   t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+(defun gud-cd (dir)
+  (interactive "FChange GDB's default directory: ")
+  (let ((instance (gdb-needed-default-instance)))
+    (save-excursion
+      (set-buffer (gdb-get-instance-buffer instance 'gud))
+      (cd dir))
+    (gud-display-gud-buffer instance)
+    (apply comint-input-sender
+	   (list (gdb-instance-process instance)
+		 (concat "cd " dir)))))
+
+
+(defun gud-exec-file (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "exec-file " (read-file-name "Init memory from executable: "
+						nil
+						"a.out"
+						t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+(defun gud-load (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "load " (read-file-name "Dynamicly load from file: "
+					   nil
+					   "a.out"
+					   t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+(defun gud-symbol-file (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "symbol-file " (read-file-name "Read symbol table from file: "
+						  nil
+						  "a.out"
+						  t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+
+(defun gud-add-symbol-file (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "add-symbol-file "
+		   (read-file-name "Add symbols from file: "
+				   nil
+				   "a.out"
+				   t)))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+
+(defun gud-sharedlibrary (instance command)
+  (interactive
+   (let ((temp-buffer-show-function (function gud-temp-buffer-show)))
+     (list (gdb-needed-default-instance)
+	   (concat "sharedlibrary "
+		   (read-string "Load symbols for files matching regexp: ")))))
+  (gud-display-gud-buffer instance)
+  (apply comint-input-sender
+	 (list (gdb-instance-process instance) command)))
+
+
+
+
+
+;;;; Window management
+
+
+;;; FIXME: This should only return true for buffers in the current instance
+(defun gud-protected-buffer-p (buffer)
+  "Is BUFFER a buffer which we want to leave displayed?"
+  (save-excursion
+    (set-buffer buffer)
+    (or gdb-buffer-type
+	overlay-arrow-position)))
+
+;;; The way we abuse the dedicated-p flag is pretty gross, but seems
+;;; to do the right thing.  Seeing as there is no way for Lisp code to
+;;; get at the use_time field of a window, I'm not sure there exists a
+;;; more elegant solution without writing C code.
+
+(defun gud-display-buffer (buf &optional size)
+  (let ((must-split nil)
+	(answer nil))
+    (unwind-protect
+	(progn
+	  (walk-windows
+	   '(lambda (win)
+	      (if (gud-protected-buffer-p (window-buffer win))
+		  (set-window-dedicated-p win t))))
+	  (setq answer (get-buffer-window buf))
+	  (if (not answer)
+	      (let ((window (get-lru-window)))
+		(if window
+		    (progn
+		      (set-window-buffer window buf)
+		      (setq answer window))
+		  (setq must-split t)))))
+      (walk-windows
+       '(lambda (win)
+	  (if (gud-protected-buffer-p (window-buffer win))
+	      (set-window-dedicated-p win nil)))))
+    (if must-split
+	(let* ((largest (get-largest-window))
+	       (cur-size (window-height largest))
+	       (new-size (and size (< size cur-size) (- cur-size size))))
+	  (setq answer (split-window largest new-size))
+	  (set-window-buffer answer buf)))
+    answer))
+
+(defun existing-source-window (buffer)
+  (catch 'found
+    (save-excursion
+      (walk-windows
+       (function
+	(lambda (win)
+	  (if (and overlay-arrow-position
+		   (eq (window-buffer win)
+		       (marker-buffer overlay-arrow-position)))
+	      (progn
+		(set-window-buffer win buffer)
+		(throw 'found win))))))
+      nil)))
+      
+(defun gud-display-source-buffer (buffer)
+  (or (existing-source-window buffer)
+      (gud-display-buffer buffer)))
+
+(defun gud-frame-buffer (buf)
+  (save-excursion
+    (set-buffer buf)
+    (make-frame)))
+
+
+
+;;; Shared keymap initialization:
+
+(defun make-windows-menu (map)
+  (define-key map [menu-bar displays]
+    (cons "GDB-Windows" (make-sparse-keymap "GDB-Windows")))
+  (define-key map [menu-bar displays gdb]
+    '("Gdb" . gud-display-gud-buffer))
+  (define-key map [menu-bar displays registers]
+    '("Registers" . gud-display-registers-buffer))
+  (define-key map [menu-bar displays frames]
+    '("Stack" . gud-display-stack-buffer))
+  (define-key map [menu-bar displays breakpoints]
+    '("Breakpoints" . gud-display-breakpoints-buffer))
+  (define-key map [menu-bar displays commands]
+    '("Commands" . gud-display-command-buffer)))
+
+(defun gud-display-gud-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-display-buffer
+   (gdb-get-create-instance-buffer instance 'gud)))
+
+(make-windows-menu gud-breakpoints-mode-map)
+(make-windows-menu gud-frames-mode-map)
+(make-windows-menu gud-registers-mode-map)
+
+
+
+(defun make-frames-menu (map)
+  (define-key map [menu-bar frames]
+    (cons "GDB-Frames" (make-sparse-keymap "GDB-Frames")))
+  (define-key map [menu-bar frames gdb]
+    '("Gdb" . gud-frame-gud-buffer))
+  (define-key map [menu-bar frames registers]
+    '("Registers" . gud-frame-registers-buffer))
+  (define-key map [menu-bar frames frames]
+    '("Stack" . gud-frame-stack-buffer))
+  (define-key map [menu-bar frames breakpoints]
+    '("Breakpoints" . gud-frame-breakpoints-buffer))
+  (define-key map [menu-bar displays commands]
+    '("Commands" . gud-display-command-buffer)))
+
+(defun gud-frame-gud-buffer (instance)
+  (interactive (list (gdb-needed-default-instance)))
+  (gud-frame-buffer
+   (gdb-get-create-instance-buffer instance 'gud)))
+
+(make-frames-menu gud-breakpoints-mode-map)
+(make-frames-menu gud-frames-mode-map)
+(make-frames-menu gud-registers-mode-map)
+
+
+(defun gud-gdb-find-file (f)
+  (find-file-noselect f))
+
+;;;###autoload
+(defun gdb (command-line)
+  "Run gdb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger."
+  (interactive
+   (list (read-from-minibuffer "Run gdb (like this): "
+			       (if (consp gud-gdb-history)
+				   (car gud-gdb-history)
+				 "gdb ")
+			       nil nil
+			       '(gud-gdb-history . 1))))
+  (gud-overload-functions
+   '((gud-massage-args . gud-gdb-massage-args)
+     (gud-marker-filter . gud-gdb-marker-filter)
+     (gud-find-file . gud-gdb-find-file)
+     ))
+
+  (let* ((words (gud-chop-words command-line))
+	 (program (car words))
+	 (file-word (let ((w (cdr words)))
+		      (while (and w (= ?- (aref (car w) 0)))
+			(setq w (cdr w)))
+		      (car w)))
+	 (args (delq file-word (cdr words)))
+	 (file (expand-file-name file-word))
+	 (filepart (file-name-nondirectory file))
+	 (buffer-name (concat "*gud-" filepart "*")))
+    (setq gdb-first-time (not (get-buffer-process buffer-name))))
+
+  (gud-common-init command-line)
+
+  (gud-def gud-break  "break %f:%l"  "\C-b" "Set breakpoint at current line.")
+  (gud-def gud-tbreak "tbreak %f:%l" "\C-t" "Set breakpoint at current line.")
+  (gud-def gud-remove "clear %l"     "\C-d" "Remove breakpoint at current line")
+  (gud-def gud-kill   "kill"	     nil    "Kill the program.")
+  (gud-def gud-run    "run"	     nil    "Run the program.")
+  (gud-def gud-stepi  "stepi %p"     "\C-i" "Step one instruction with display.")
+  (gud-def gud-step   "step %p"      "\C-s" "Step one source line with display.")
+  (gud-def gud-next   "next %p"      "\C-n" "Step one line (skip functions).")
+  (gud-def gud-finish "finish"       "\C-f" "Finish executing current function.")
+  (gud-def gud-cont   "cont"         "\C-r" "Continue with display.")
+  (gud-def gud-up     "up %p"        "<" "Up N stack frames (numeric arg).")
+  (gud-def gud-down   "down %p"      ">" "Down N stack frames (numeric arg).")
+  (gud-def gud-print  "print %e"     "\C-p" "Evaluate C expression at point.")
+
+  (setq comint-prompt-regexp "^(.*gdb[+]?) *")
+  (setq comint-input-sender 'gdb-send)
+  (run-hooks 'gdb-mode-hook)
+  (let ((instance
+	 (make-gdb-instance (get-buffer-process (current-buffer)))
+	 ))
+    (if gdb-first-time (gdb-clear-inferior-io instance)))
+  )
+
+
+;; ======================================================================
+;; sdb functions
+
+;;; History of argument lists passed to sdb.
+(defvar gud-sdb-history nil)
+
+(defvar gud-sdb-needs-tags (not (file-exists-p "/var"))
+  "If nil, we're on a System V Release 4 and don't need the tags hack.")
+
+(defvar gud-sdb-lastfile nil)
+
+(defun gud-sdb-massage-args (file args)
+  (cons file args))
+
+(defun gud-sdb-marker-filter (string)
+  (cond 
+   ;; System V Release 3.2 uses this format
+   ((string-match "\\(^0x\\w* in \\|^\\|\n\\)\\([^:\n]*\\):\\([0-9]*\\):.*\n"
+		    string)
+    (setq gud-last-frame
+	  (cons
+	   (substring string (match-beginning 2) (match-end 2))
+	   (string-to-int 
+	    (substring string (match-beginning 3) (match-end 3))))))
+   ;; System V Release 4.0 
+   ((string-match "^\\(BREAKPOINT\\|STEPPED\\) process [0-9]+ function [^ ]+ in \\(.+\\)\n"
+		       string)
+    (setq gud-sdb-lastfile
+	  (substring string (match-beginning 2) (match-end 2))))
+   ((and gud-sdb-lastfile (string-match "^\\([0-9]+\\):" string))
+	 (setq gud-last-frame
+	       (cons
+		gud-sdb-lastfile
+		(string-to-int 
+		 (substring string (match-beginning 1) (match-end 1))))))
+   (t 
+    (setq gud-sdb-lastfile nil)))
+  string)
+
+(defun gud-sdb-find-file (f)
+  (if gud-sdb-needs-tags
+      (find-tag-noselect f)
+    (find-file-noselect f)))
+
+;;;###autoload
+(defun sdb (command-line)
+  "Run sdb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger."
+  (interactive
+   (list (read-from-minibuffer "Run sdb (like this): "
+			       (if (consp gud-sdb-history)
+				   (car gud-sdb-history)
+				 "sdb ")
+			       nil nil
+			       '(gud-sdb-history . 1))))
+  (if (and gud-sdb-needs-tags
+	   (not (and (boundp 'tags-file-name) (file-exists-p tags-file-name))))
+      (error "The sdb support requires a valid tags table to work."))
+  (gud-overload-functions '((gud-massage-args . gud-sdb-massage-args)
+			    (gud-marker-filter . gud-sdb-marker-filter)
+			    (gud-find-file . gud-sdb-find-file)
+			    ))
+
+  (gud-common-init command-line)
+
+  (gud-def gud-break  "%l b" "\C-b"   "Set breakpoint at current line.")
+  (gud-def gud-tbreak "%l c" "\C-t"   "Set temporary breakpoint at current line.")
+  (gud-def gud-remove "%l d" "\C-d"   "Remove breakpoint at current line")
+  (gud-def gud-step   "s %p" "\C-s"   "Step one source line with display.")
+  (gud-def gud-stepi  "i %p" "\C-i"   "Step one instruction with display.")
+  (gud-def gud-next   "S %p" "\C-n"   "Step one line (skip functions).")
+  (gud-def gud-cont   "c"    "\C-r"   "Continue with display.")
+  (gud-def gud-print  "%e/"  "\C-p"   "Evaluate C expression at point.")
+
+  (setq comint-prompt-regexp  "\\(^\\|\n\\)\\*")
+  (run-hooks 'sdb-mode-hook)
+  )
+
+;; ======================================================================
+;; dbx functions
+
+;;; History of argument lists passed to dbx.
+(defvar gud-dbx-history nil)
+
+(defun gud-dbx-massage-args (file args)
+  (cons file args))
+
+(defun gud-dbx-marker-filter (string)
+  (if (or (string-match
+         "stopped in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
+         string)
+        (string-match
+         "signal .* in .* at line \\([0-9]*\\) in file \"\\([^\"]*\\)\""
+         string))
+      (setq gud-last-frame
+	    (cons
+	     (substring string (match-beginning 2) (match-end 2))
+	     (string-to-int 
+	      (substring string (match-beginning 1) (match-end 1))))))
+  string)
+
+(defun gud-dbx-find-file (f)
+  (find-file-noselect f))
+
+;;;###autoload
+(defun dbx (command-line)
+  "Run dbx on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger."
+  (interactive
+   (list (read-from-minibuffer "Run dbx (like this): "
+			       (if (consp gud-dbx-history)
+				   (car gud-dbx-history)
+				 "dbx ")
+			       nil nil
+			       '(gud-dbx-history . 1))))
+  (gud-overload-functions '((gud-massage-args . gud-dbx-massage-args)
+			    (gud-marker-filter . gud-dbx-marker-filter)
+			    (gud-find-file . gud-dbx-find-file)
+			    ))
+
+  (gud-common-init command-line)
+
+  (gud-def gud-break  "file \"%d%f\"\nstop at %l"
+	   			  "\C-b" "Set breakpoint at current line.")
+;;  (gud-def gud-break  "stop at \"%f\":%l"
+;;	   			  "\C-b" "Set breakpoint at current line.")
+  (gud-def gud-remove "clear %l"  "\C-d" "Remove breakpoint at current line")
+  (gud-def gud-step   "step %p"	  "\C-s" "Step one line with display.")
+  (gud-def gud-stepi  "stepi %p"  "\C-i" "Step one instruction with display.")
+  (gud-def gud-next   "next %p"	  "\C-n" "Step one line (skip functions).")
+  (gud-def gud-cont   "cont"	  "\C-r" "Continue with display.")
+  (gud-def gud-up     "up %p"	  "<" "Up (numeric arg) stack frames.")
+  (gud-def gud-down   "down %p"	  ">" "Down (numeric arg) stack frames.")
+  (gud-def gud-print  "print %e"  "\C-p" "Evaluate C expression at point.")
+
+  (setq comint-prompt-regexp  "^[^)]*dbx) *")
+  (run-hooks 'dbx-mode-hook)
+  )
+
+;; ======================================================================
+;; xdb (HP PARISC debugger) functions
+
+;;; History of argument lists passed to xdb.
+(defvar gud-xdb-history nil)
+
+(defvar gud-xdb-directories nil
+  "*A list of directories that xdb should search for source code.
+If nil, only source files in the program directory
+will be known to xdb.
+
+The file names should be absolute, or relative to the directory
+containing the executable being debugged.")
+
+(defun gud-xdb-massage-args (file args)
+  (nconc (let ((directories gud-xdb-directories)
+	       (result nil))
+	   (while directories
+	     (setq result (cons (car directories) (cons "-d" result)))
+	     (setq directories (cdr directories)))
+	   (nreverse (cons file result)))
+	 args))
+
+(defun gud-xdb-file-name (f)
+  "Transform a relative pathname to a full pathname in xdb mode"
+  (let ((result nil))
+    (if (file-exists-p f)
+        (setq result (expand-file-name f))
+      (let ((directories gud-xdb-directories))
+        (while directories
+          (let ((path (concat (car directories) "/" f)))
+            (if (file-exists-p path)
+                (setq result (expand-file-name path)
+                      directories nil)))
+          (setq directories (cdr directories)))))
+    result))
+
+;; xdb does not print the lines all at once, so we have to accumulate them
+(defvar gud-xdb-accumulation "")
+
+(defun gud-xdb-marker-filter (string)
+  (let (result)
+    (if (or (string-match comint-prompt-regexp string)
+            (string-match ".*\012" string))
+        (setq result (concat gud-xdb-accumulation string)
+              gud-xdb-accumulation "")
+      (setq gud-xdb-accumulation (concat gud-xdb-accumulation string)))
+    (if result
+        (if (or (string-match "\\([^\n \t:]+\\): [^:]+: \\([0-9]+\\):" result)
+                (string-match "[^: \t]+:[ \t]+\\([^:]+\\): [^:]+: \\([0-9]+\\):"
+                              result))
+            (let ((line (string-to-int 
+                         (substring result (match-beginning 2) (match-end 2))))
+                  (file (gud-xdb-file-name
+                         (substring result (match-beginning 1) (match-end 1)))))
+              (if file
+                  (setq gud-last-frame (cons file line))))))
+    (or result "")))    
+               
+(defun gud-xdb-find-file (f)
+  (let ((realf (gud-xdb-file-name f)))
+    (if realf (find-file-noselect realf))))
+
+;;;###autoload
+(defun xdb (command-line)
+  "Run xdb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger.
+
+You can set the variable 'gud-xdb-directories' to a list of program source
+directories if your program contains sources from more than one directory."
+  (interactive
+   (list (read-from-minibuffer "Run xdb (like this): "
+			       (if (consp gud-xdb-history)
+				   (car gud-xdb-history)
+				 "xdb ")
+			       nil nil
+			       '(gud-xdb-history . 1))))
+  (gud-overload-functions '((gud-massage-args . gud-xdb-massage-args)
+			    (gud-marker-filter . gud-xdb-marker-filter)
+			    (gud-find-file . gud-xdb-find-file)))
+
+  (gud-common-init command-line)
+
+  (gud-def gud-break  "b %f:%l"    "\C-b" "Set breakpoint at current line.")
+  (gud-def gud-tbreak "b %f:%l\\t" "\C-t"
+           "Set temporary breakpoint at current line.")
+  (gud-def gud-remove "db"         "\C-d" "Remove breakpoint at current line")
+  (gud-def gud-step   "s %p"	   "\C-s" "Step one line with display.")
+  (gud-def gud-next   "S %p"	   "\C-n" "Step one line (skip functions).")
+  (gud-def gud-cont   "c"	   "\C-r" "Continue with display.")
+  (gud-def gud-up     "up %p"	   "<"    "Up (numeric arg) stack frames.")
+  (gud-def gud-down   "down %p"	   ">"    "Down (numeric arg) stack frames.")
+  (gud-def gud-finish "bu\\t"      "\C-f" "Finish executing current function.")
+  (gud-def gud-print  "p %e"       "\C-p" "Evaluate C expression at point.")
+
+  (setq comint-prompt-regexp  "^>")
+  (make-local-variable 'gud-xdb-accumulation)
+  (setq gud-xdb-accumulation "")
+  (run-hooks 'xdb-mode-hook))
+
+;; ======================================================================
+;; perldb functions
+
+;;; History of argument lists passed to perldb.
+(defvar gud-perldb-history nil)
+
+(defun gud-perldb-massage-args (file args)
+  (cons "-d" (cons file (cons "-emacs" args))))
+
+;; There's no guarantee that Emacs will hand the filter the entire
+;; marker at once; it could be broken up across several strings.  We
+;; might even receive a big chunk with several markers in it.  If we
+;; receive a chunk of text which looks like it might contain the
+;; beginning of a marker, we save it here between calls to the
+;; filter.
+(defvar gud-perldb-marker-acc "")
+
+(defun gud-perldb-marker-filter (string)
+  (save-match-data
+    (setq gud-perldb-marker-acc (concat gud-perldb-marker-acc string))
+    (let ((output ""))
+
+      ;; Process all the complete markers in this chunk.
+      (while (string-match "^\032\032\\([^:\n]*\\):\\([0-9]*\\):.*\n"
+			   gud-perldb-marker-acc)
+	(setq
+
+	 ;; Extract the frame position from the marker.
+	 gud-last-frame
+	 (cons (substring gud-perldb-marker-acc (match-beginning 1) (match-end 1))
+	       (string-to-int (substring gud-perldb-marker-acc
+					 (match-beginning 2)
+					 (match-end 2))))
+
+	 ;; Append any text before the marker to the output we're going
+	 ;; to return - we don't include the marker in this text.
+	 output (concat output
+			(substring gud-perldb-marker-acc 0 (match-beginning 0)))
+
+	 ;; Set the accumulator to the remaining text.
+	 gud-perldb-marker-acc (substring gud-perldb-marker-acc (match-end 0))))
+
+      ;; Does the remaining text look like it might end with the
+      ;; beginning of another marker?  If it does, then keep it in
+      ;; gud-perldb-marker-acc until we receive the rest of it.  Since we
+      ;; know the full marker regexp above failed, it's pretty simple to
+      ;; test for marker starts.
+      (if (string-match "^\032.*\\'" gud-perldb-marker-acc)
+	  (progn
+	    ;; Everything before the potential marker start can be output.
+	    (setq output (concat output (substring gud-perldb-marker-acc
+						   0 (match-beginning 0))))
+
+	    ;; Everything after, we save, to combine with later input.
+	    (setq gud-perldb-marker-acc
+		  (substring gud-perldb-marker-acc (match-beginning 0))))
+
+	(setq output (concat output gud-perldb-marker-acc)
+	      gud-perldb-marker-acc ""))
+
+      output)))
+
+(defun gud-perldb-find-file (f)
+  (find-file-noselect f))
+
+;;;###autoload
+(defun perldb (command-line)
+  "Run perldb on program FILE in buffer *gud-FILE*.
+The directory containing FILE becomes the initial working directory
+and source-file directory for your debugger."
+  (interactive
+   (list (read-from-minibuffer "Run perldb (like this): "
+			       (if (consp gud-perldb-history)
+				   (car gud-perldb-history)
+				 "perl ")
+			       nil nil
+			       '(gud-perldb-history . 1))))
+  (gud-overload-functions '((gud-massage-args . gud-perldb-massage-args)
+			    (gud-marker-filter . gud-perldb-marker-filter)
+			    (gud-find-file . gud-perldb-find-file)
+			    ))
+
+  (gud-common-init command-line)
+
+  (gud-def gud-break  "b %l"         "\C-b" "Set breakpoint at current line.")
+  (gud-def gud-remove "d %l"         "\C-d" "Remove breakpoint at current line")
+  (gud-def gud-step   "s"            "\C-s" "Step one source line with display.")
+  (gud-def gud-next   "n"            "\C-n" "Step one line (skip functions).")
+  (gud-def gud-cont   "c"            "\C-r" "Continue with display.")
+;  (gud-def gud-finish "finish"       "\C-f" "Finish executing current function.")
+;  (gud-def gud-up     "up %p"        "<" "Up N stack frames (numeric arg).")
+;  (gud-def gud-down   "down %p"      ">" "Down N stack frames (numeric arg).")
+  (gud-def gud-print  "%e"           "\C-p" "Evaluate perl expression at point.")
+
+  (setq comint-prompt-regexp "^  DB<[0-9]+> ")
+  (run-hooks 'perldb-mode-hook)
+  )
+
+;;
+;; End of debugger-specific information
+;;
+
+
+;;; When we send a command to the debugger via gud-call, it's annoying
+;;; to see the command and the new prompt inserted into the debugger's
+;;; buffer; we have other ways of knowing the command has completed.
+;;;
+;;; If the buffer looks like this:
+;;; --------------------
+;;; (gdb) set args foo bar
+;;; (gdb) -!-
+;;; --------------------
+;;; (the -!- marks the location of point), and we type `C-x SPC' in a
+;;; source file to set a breakpoint, we want the buffer to end up like
+;;; this:
+;;; --------------------
+;;; (gdb) set args foo bar
+;;; Breakpoint 1 at 0x92: file make-docfile.c, line 49.
+;;; (gdb) -!-
+;;; --------------------
+;;; Essentially, the old prompt is deleted, and the command's output
+;;; and the new prompt take its place.
+;;;
+;;; Not echoing the command is easy enough; you send it directly using
+;;; comint-input-sender, and it never enters the buffer.  However,
+;;; getting rid of the old prompt is trickier; you don't want to do it
+;;; when you send the command, since that will result in an annoying
+;;; flicker as the prompt is deleted, redisplay occurs while Emacs
+;;; waits for a response from the debugger, and the new prompt is
+;;; inserted.  Instead, we'll wait until we actually get some output
+;;; from the subprocess before we delete the prompt.  If the command
+;;; produced no output other than a new prompt, that prompt will most
+;;; likely be in the first chunk of output received, so we will delete
+;;; the prompt and then replace it with an identical one.  If the
+;;; command produces output, the prompt is moving anyway, so the
+;;; flicker won't be annoying.
+;;;
+;;; So - when we want to delete the prompt upon receipt of the next
+;;; chunk of debugger output, we position gud-delete-prompt-marker at
+;;; the start of the prompt; the process filter will notice this, and
+;;; delete all text between it and the process output marker.  If
+;;; gud-delete-prompt-marker points nowhere, we leave the current
+;;; prompt alone.
+(defvar gud-delete-prompt-marker nil)
+
+
+(defvar gdbish-comint-mode-map (copy-keymap comint-mode-map))
+(define-key gdbish-comint-mode-map "\C-c\M-\C-r" 'gud-display-registers-buffer)
+(define-key gdbish-comint-mode-map "\C-c\M-\C-f" 'gud-display-stack-buffer)
+(define-key gdbish-comint-mode-map "\C-c\M-\C-b" 'gud-display-breakpoints-buffer)
+
+(make-windows-menu gdbish-comint-mode-map)
+(make-frames-menu gdbish-comint-mode-map)
+
+(defun gud-mode ()
+  "Major mode for interacting with an inferior debugger process.
+
+   You start it up with one of the commands M-x gdb, M-x sdb, M-x dbx,
+or M-x xdb.  Each entry point finishes by executing a hook; `gdb-mode-hook',
+`sdb-mode-hook', `dbx-mode-hook' or `xdb-mode-hook' respectively.
+
+After startup, the following commands are available in both the GUD
+interaction buffer and any source buffer GUD visits due to a breakpoint stop
+or step operation:
+
+\\[gud-break] sets a breakpoint at the current file and line.  In the
+GUD buffer, the current file and line are those of the last breakpoint or
+step.  In a source buffer, they are the buffer's file and current line.
+
+\\[gud-remove] removes breakpoints on the current file and line.
+
+\\[gud-refresh] displays in the source window the last line referred to
+in the gud buffer.
+
+\\[gud-step], \\[gud-next], and \\[gud-stepi] do a step-one-line,
+step-one-line (not entering function calls), and step-one-instruction
+and then update the source window with the current file and position.
+\\[gud-cont] continues execution.
+
+\\[gud-print] tries to find the largest C lvalue or function-call expression
+around point, and sends it to the debugger for value display.
+
+The above commands are common to all supported debuggers except xdb which
+does not support stepping instructions.
+
+Under gdb, sdb and xdb, \\[gud-tbreak] behaves exactly like \\[gud-break],
+except that the breakpoint is temporary; that is, it is removed when
+execution stops on it.
+
+Under gdb, dbx, and xdb, \\[gud-up] pops up through an enclosing stack
+frame.  \\[gud-down] drops back down through one.
+
+If you are using gdb or xdb, \\[gud-finish] runs execution to the return from
+the current function and stops.
+
+All the keystrokes above are accessible in the GUD buffer
+with the prefix C-c, and in all buffers through the prefix C-x C-a.
+
+All pre-defined functions for which the concept make sense repeat
+themselves the appropriate number of times if you give a prefix
+argument.
+
+You may use the `gud-def' macro in the initialization hook to define other
+commands.
+
+Other commands for interacting with the debugger process are inherited from
+comint mode, which see."
+  (interactive)
+  (comint-mode)
+  (setq major-mode 'gud-mode)
+  (setq mode-name "Debugger")
+  (setq mode-line-process '(": %s"))
+  (use-local-map (copy-keymap gdbish-comint-mode-map))
+  (setq gud-last-frame nil)
+  (make-local-variable 'comint-prompt-regexp)
+  (make-local-variable 'gud-delete-prompt-marker)
+  (setq gud-delete-prompt-marker (make-marker))
+  (run-hooks 'gud-mode-hook)
+)
+
+(defvar gud-comint-buffer nil)
+
+;; Chop STRING into words separated by SPC or TAB and return a list of them.
+(defun gud-chop-words (string)
+  (let ((i 0) (beg 0)
+	(len (length string))
+	(words nil))
+    (while (< i len)
+      (if (memq (aref string i) '(?\t ? ))
+	  (progn
+	    (setq words (cons (substring string beg i) words)
+		  beg (1+ i))
+	    (while (and (< beg len) (memq (aref string beg) '(?\t ? )))
+	      (setq beg (1+ beg)))
+	    (setq i (1+ beg)))
+	(setq i (1+ i))))
+    (if (< beg len)
+	(setq words (cons (substring string beg) words)))
+    (nreverse words)))
+
+(defvar gud-target-name "--unknown--"
+  "The apparent name of the program being debugged in a gud buffer.
+For sure this the root string used in smashing together the gud 
+buffer's name, even if that doesn't happen to be the name of a 
+program.")
+
+;; Perform initializations common to all debuggers.
+(defun gud-common-init (command-line)
+  (let* ((words (gud-chop-words command-line))
+	 (program (car words))
+	 (file-word (let ((w (cdr words)))
+		      (while (and w (= ?- (aref (car w) 0)))
+			(setq w (cdr w)))
+		      (car w)))
+	 (args (delq file-word (cdr words)))
+	 (file (expand-file-name file-word))
+	 (filepart (file-name-nondirectory file))
+	 (buffer-name (concat "*gud-" filepart "*")))
+    (switch-to-buffer buffer-name)
+    (setq default-directory (file-name-directory file))
+    (or (bolp) (newline))
+    (insert "Current directory is " default-directory "\n")
+    (let ((old-instance gdb-buffer-instance))
+      (apply 'make-comint (concat "gud-" filepart) program nil
+	     (gud-massage-args file args))
+      (gud-mode)
+      (make-variable-buffer-local 'old-gdb-buffer-instance)
+      (setq old-gdb-buffer-instance old-instance))
+    (make-variable-buffer-local 'gud-target-name)
+    (setq gud-target-name filepart))
+  (set-process-filter (get-buffer-process (current-buffer)) 'gud-filter)
+  (set-process-sentinel (get-buffer-process (current-buffer)) 'gud-sentinel)
+  (gud-set-buffer)
+  )
+
+(defun gud-set-buffer ()
+  (cond ((eq major-mode 'gud-mode)
+	(setq gud-comint-buffer (current-buffer)))))
+
+;; These functions are responsible for inserting output from your debugger
+;; into the buffer.  The hard work is done by the method that is
+;; the value of gud-marker-filter.
+
+(defun gud-filter (proc string)
+  ;; Here's where the actual buffer insertion is done
+  (let ((inhibit-quit t))
+    (save-excursion
+      (set-buffer (process-buffer proc))
+      (let (moving output-after-point)
+	(save-excursion
+	  (goto-char (process-mark proc))
+	  ;; If we have been so requested, delete the debugger prompt.
+	  (if (marker-buffer gud-delete-prompt-marker)
+	      (progn
+		(delete-region (point) gud-delete-prompt-marker)
+		(set-marker gud-delete-prompt-marker nil)))
+	  (insert-before-markers (gud-marker-filter string))
+	  (setq moving (= (point) (process-mark proc)))
+	  (setq output-after-point (< (point) (process-mark proc)))
+	  ;; Check for a filename-and-line number.
+	  ;; Don't display the specified file
+	  ;; unless (1) point is at or after the position where output appears
+	  ;; and (2) this buffer is on the screen.
+	  (if (and gud-last-frame
+		   (not output-after-point)
+		   (get-buffer-window (current-buffer)))
+	      (gud-display-frame)))
+	(if moving (goto-char (process-mark proc)))))))
+
+(defun gud-proc-died (proc)
+  ;; Stop displaying an arrow in a source file.
+  (setq overlay-arrow-position nil)
+
+  ;; Kill the dummy process, so that C-x C-c won't worry about it.
+  (save-excursion
+    (set-buffer (process-buffer proc))
+    (kill-process
+     (get-buffer-process
+      (gdb-get-instance-buffer gdb-buffer-instance 'gdb-inferior-io))))
+  )
+
+(defun gud-sentinel (proc msg)
+  (cond ((null (buffer-name (process-buffer proc)))
+	 ;; buffer killed
+	 (gud-proc-died proc)
+	 (set-process-buffer proc nil))
+	((memq (process-status proc) '(signal exit))
+	 (gud-proc-died proc)
+
+	 ;; Fix the mode line.
+	 (setq mode-line-process
+	       (concat ": "
+		       (symbol-name (process-status proc))))
+	 (let* ((obuf (current-buffer)))
+	   ;; save-excursion isn't the right thing if
+	   ;;  process-buffer is current-buffer
+	   (unwind-protect
+	       (progn
+		 ;; Write something in *compilation* and hack its mode line,
+		 (set-buffer (process-buffer proc))
+		 ;; Force mode line redisplay soon
+		 (set-buffer-modified-p (buffer-modified-p))
+		 (if (eobp)
+		     (insert ?\n mode-name " " msg)
+		   (save-excursion
+		     (goto-char (point-max))
+		     (insert ?\n mode-name " " msg)))
+		 ;; If buffer and mode line will show that the process
+		 ;; is dead, we can delete it now.  Otherwise it
+		 ;; will stay around until M-x list-processes.
+		 (delete-process proc))
+	     ;; Restore old buffer, but don't restore old point
+	     ;; if obuf is the gud buffer.
+	     (set-buffer obuf))))))
+
+(defun gud-display-frame ()
+  "Find and obey the last filename-and-line marker from the debugger.
+Obeying it means displaying in another window the specified file and line."
+  (interactive)
+  (if gud-last-frame
+   (progn
+;     (gud-set-buffer)
+     (gud-display-line (car gud-last-frame) (cdr gud-last-frame))
+     (setq gud-last-last-frame gud-last-frame
+	   gud-last-frame nil))))
+
+;; Make sure the file named TRUE-FILE is in a buffer that appears on the screen
+;; and that its line LINE is visible.
+;; Put the overlay-arrow on the line LINE in that buffer.
+;; Most of the trickiness in here comes from wanting to preserve the current
+;; region-restriction if that's possible.  We use an explicit display-buffer
+;; to get around the fact that this is called inside a save-excursion.
+
+(defun gud-display-line (true-file line)
+  (let* ((buffer (gud-find-file true-file))
+	 (window (gud-display-source-buffer buffer))
+	 (pos))
+    (if (not window)
+	(error "foo bar baz"))
+;;;    (if (equal buffer (current-buffer))
+;;;	nil
+;;;      (setq buffer-read-only nil))
+    (save-excursion
+;;;      (setq buffer-read-only t)
+      (set-buffer buffer)
+      (save-restriction
+	(widen)
+	(goto-line line)
+	(setq pos (point))
+	(setq overlay-arrow-string "=>")
+	(or overlay-arrow-position
+	    (setq overlay-arrow-position (make-marker)))
+	(set-marker overlay-arrow-position (point) (current-buffer)))
+      (cond ((or (< pos (point-min)) (> pos (point-max)))
+	     (widen)
+	     (goto-char pos))))
+    (set-window-point window overlay-arrow-position)))
+
+;;; The gud-call function must do the right thing whether its invoking
+;;; keystroke is from the GUD buffer itself (via major-mode binding)
+;;; or a C buffer.  In the former case, we want to supply data from
+;;; gud-last-frame.  Here's how we do it:
+
+(defun gud-format-command (str arg)
+  (let ((insource (not (eq (current-buffer) gud-comint-buffer))))
+    (if (string-match "\\(.*\\)%f\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (file-name-nondirectory (if insource
+					       (buffer-file-name)
+					     (car gud-last-frame)))
+		   (substring str (match-beginning 2) (match-end 2)))))
+    (if (string-match "\\(.*\\)%d\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (file-name-directory (if insource
+					    (buffer-file-name)
+					  (car gud-last-frame)))
+		   (substring str (match-beginning 2) (match-end 2)))))
+    (if (string-match "\\(.*\\)%l\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (if insource
+		       (save-excursion
+			 (beginning-of-line)
+			 (save-restriction (widen) 
+					   (1+ (count-lines 1 (point)))))
+		     (cdr gud-last-frame))
+		   (substring str (match-beginning 2) (match-end 2)))))
+    (if (string-match "\\(.*\\)%e\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (find-c-expr)
+		   (substring str (match-beginning 2) (match-end 2)))))
+    (if (string-match "\\(.*\\)%a\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (gud-read-address)
+		   (substring str (match-beginning 2) (match-end 2)))))
+    (if (string-match "\\(.*\\)%p\\(.*\\)" str)
+	(setq str (concat
+		   (substring str (match-beginning 1) (match-end 1))
+		   (if arg (int-to-string arg) "")
+		   (substring str (match-beginning 2) (match-end 2)))))
+    )
+  str
+  )
+
+(defun gud-read-address ()
+  "Return a string containing the core-address found in the buffer at point."
+  (save-excursion
+    (let ((pt (point)) found begin)
+      (setq found (if (search-backward "0x" (- pt 7) t) (point)))
+      (cond
+       (found (forward-char 2)
+	      (buffer-substring found
+				(progn (re-search-forward "[^0-9a-f]")
+				       (forward-char -1)
+				       (point))))
+       (t (setq begin (progn (re-search-backward "[^0-9]") 
+			     (forward-char 1)
+			     (point)))
+	  (forward-char 1)
+	  (re-search-forward "[^0-9]")
+	  (forward-char -1)
+	  (buffer-substring begin (point)))))))
+
+(defun gud-call (fmt &optional arg)
+  (let ((msg (gud-format-command fmt arg)))
+    (message "Command: %s" msg)
+    (sit-for 0)
+    (gud-basic-call msg)))
+
+(defun gud-basic-call (command)
+  "Invoke the debugger COMMAND displaying source in other window."
+  (interactive)
+  (gud-set-buffer)
+  (let ((proc (get-buffer-process gud-comint-buffer)))
+
+    ;; Arrange for the current prompt to get deleted.
+    (save-excursion
+      (set-buffer gud-comint-buffer)
+      (goto-char (process-mark proc))
+      (beginning-of-line)
+      (if (looking-at comint-prompt-regexp)
+	  (set-marker gud-delete-prompt-marker (point)))
+      (apply comint-input-sender (list proc command)))))
+
+(defun gud-refresh (&optional arg)
+  "Fix up a possibly garbled display, and redraw the arrow."
+  (interactive "P")
+  (recenter arg)
+  (or gud-last-frame (setq gud-last-frame gud-last-last-frame))
+  (gud-display-frame))
+
+;;; Code for parsing expressions out of C code.  The single entry point is
+;;; find-c-expr, which tries to return an lvalue expression from around point.
+;;;
+;;; The rest of this file is a hacked version of gdbsrc.el by
+;;; Debby Ayers <ayers@asc.slb.com>,
+;;; Rich Schaefer <schaefer@asc.slb.com> Schlumberger, Austin, Tx.
+
+(defun find-c-expr ()
+  "Returns the C expr that surrounds point."
+  (interactive)
+  (save-excursion
+    (let ((p) (expr) (test-expr))
+      (setq p (point))
+      (setq expr (expr-cur))
+      (setq test-expr (expr-prev))
+      (while (expr-compound test-expr expr)
+	(setq expr (cons (car test-expr) (cdr expr)))
+	(goto-char (car expr))
+	(setq test-expr (expr-prev)))
+      (goto-char p)
+      (setq test-expr (expr-next))
+      (while (expr-compound expr test-expr)
+	(setq expr (cons (car expr) (cdr test-expr)))
+	(setq test-expr (expr-next))
+	)
+      (buffer-substring (car expr) (cdr expr)))))
+
+(defun expr-cur ()
+  "Returns the expr that point is in; point is set to beginning of expr.
+The expr is represented as a cons cell, where the car specifies the point in
+the current buffer that marks the beginning of the expr and the cdr specifies 
+the character after the end of the expr."
+  (let ((p (point)) (begin) (end))
+    (expr-backward-sexp)
+    (setq begin (point))
+    (expr-forward-sexp)
+    (setq end (point))
+    (if (>= p end) 
+	(progn
+	 (setq begin p)
+	 (goto-char p)
+	 (expr-forward-sexp)
+	 (setq end (point))
+	 )
+      )
+    (goto-char begin)
+    (cons begin end)))
+
+(defun expr-backward-sexp ()
+  "Version of `backward-sexp' that catches errors."
+  (condition-case nil
+      (backward-sexp)
+    (error t)))
+
+(defun expr-forward-sexp ()
+  "Version of `forward-sexp' that catches errors."
+  (condition-case nil
+     (forward-sexp)
+    (error t)))
+
+(defun expr-prev ()
+  "Returns the previous expr, point is set to beginning of that expr.
+The expr is represented as a cons cell, where the car specifies the point in
+the current buffer that marks the beginning of the expr and the cdr specifies 
+the character after the end of the expr"
+  (let ((begin) (end))
+    (expr-backward-sexp)
+    (setq begin (point))
+    (expr-forward-sexp)
+    (setq end (point))
+    (goto-char begin)
+    (cons begin end)))
+
+(defun expr-next ()
+  "Returns the following expr, point is set to beginning of that expr.
+The expr is represented as a cons cell, where the car specifies the point in
+the current buffer that marks the beginning of the expr and the cdr specifies 
+the character after the end of the expr."
+  (let ((begin) (end))
+    (expr-forward-sexp)
+    (expr-forward-sexp)
+    (setq end (point))
+    (expr-backward-sexp)
+    (setq begin (point))
+    (cons begin end)))
+
+(defun expr-compound-sep (span-start span-end)
+  "Returns '.' for '->' & '.', returns ' ' for white space,
+returns '?' for other punctuation."
+  (let ((result ? )
+	(syntax))
+    (while (< span-start span-end)
+      (setq syntax (char-syntax (char-after span-start)))
+      (cond
+       ((= syntax ? ) t)
+       ((= syntax ?.) (setq syntax (char-after span-start))
+	(cond 
+	 ((= syntax ?.) (setq result ?.))
+	 ((and (= syntax ?-) (= (char-after (+ span-start 1)) ?>))
+	  (setq result ?.)
+	  (setq span-start (+ span-start 1)))
+	 (t (setq span-start span-end)
+	    (setq result ??)))))
+      (setq span-start (+ span-start 1)))
+    result))
+
+(defun expr-compound (first second)
+  "Non-nil if concatenating FIRST and SECOND makes a single C token.
+The two exprs are represented as a cons cells, where the car 
+specifies the point in the current buffer that marks the beginning of the 
+expr and the cdr specifies the character after the end of the expr.
+Link exprs of the form:
+      Expr -> Expr
+      Expr . Expr
+      Expr (Expr)
+      Expr [Expr]
+      (Expr) Expr
+      [Expr] Expr"
+  (let ((span-start (cdr first))
+	(span-end (car second))
+	(syntax))
+    (setq syntax (expr-compound-sep span-start span-end))
+    (cond
+     ((= (car first) (car second)) nil)
+     ((= (cdr first) (cdr second)) nil)
+     ((= syntax ?.) t)
+     ((= syntax ? )
+	 (setq span-start (char-after (- span-start 1)))
+	 (setq span-end (char-after span-end))
+	 (cond
+	  ((= span-start ?) ) t )
+	  ((= span-start ?] ) t )
+          ((= span-end ?( ) t )
+	  ((= span-end ?[ ) t )
+	  (t nil))
+	 )
+     (t nil))))
+
+(provide 'gud)
+
+;;; gud.el ends here
diff --git a/gdb/gdbarch.c b/gdb/gdbarch.c
new file mode 100644
index 0000000..154fa8f
--- /dev/null
+++ b/gdb/gdbarch.c
@@ -0,0 +1,360 @@
+/* Semi-dynamic architecture support for GDB, the GNU debugger.
+   Copyright 1998, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "gdbcmd.h"
+
+
+
+/* Non-zero if we want to trace architecture code.  */
+
+#ifndef GDBARCH_DEBUG
+#define GDBARCH_DEBUG 0
+#endif
+int gdbarch_debug = GDBARCH_DEBUG;
+
+
+/* Functions to manipulate the endianness of the target.  */
+
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+/* compat - Catch old targets that expect a selectable byte-order to
+   default to BIG_ENDIAN */
+#ifndef TARGET_BYTE_ORDER_DEFAULT
+#define TARGET_BYTE_ORDER_DEFAULT BIG_ENDIAN
+#endif
+#endif
+#ifndef TARGET_BYTE_ORDER_DEFAULT
+/* compat - Catch old non byte-order selectable targets that do not
+   define TARGET_BYTE_ORDER_DEFAULT and instead expect
+   TARGET_BYTE_ORDER to be used as the default.  For targets that
+   defined neither TARGET_BYTE_ORDER nor TARGET_BYTE_ORDER_DEFAULT the
+   below will get a strange compiler warning. */
+#define TARGET_BYTE_ORDER_DEFAULT TARGET_BYTE_ORDER
+#endif
+int target_byte_order = TARGET_BYTE_ORDER_DEFAULT;
+int target_byte_order_auto = 1;
+
+/* Chain containing the \"set endian\" commands.  */
+static struct cmd_list_element *endianlist = NULL;
+
+/* Called by ``show endian''.  */
+static void show_endian PARAMS ((char *, int));
+static void
+show_endian (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *msg =
+    (TARGET_BYTE_ORDER_AUTO
+     ? "The target endianness is set automatically (currently %s endian)\n"
+     : "The target is assumed to be %s endian\n");
+  printf_unfiltered (msg, (TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little"));
+}
+
+/* Called if the user enters ``set endian'' without an argument.  */
+static void set_endian PARAMS ((char *, int));
+static void
+set_endian (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set endian\" must be followed by \"auto\", \"big\" or \"little\".\n");
+  show_endian (args, from_tty);
+}
+
+/* Called by ``set endian big''.  */
+static void set_endian_big PARAMS ((char *, int));
+static void
+set_endian_big (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (TARGET_BYTE_ORDER_SELECTABLE_P)
+    {
+      target_byte_order = BIG_ENDIAN;
+      target_byte_order_auto = 0;
+    }
+  else
+    {
+      printf_unfiltered ("Byte order is not selectable.");
+      show_endian (args, from_tty);
+    }
+}
+
+/* Called by ``set endian little''.  */
+static void set_endian_little PARAMS ((char *, int));
+static void
+set_endian_little (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (TARGET_BYTE_ORDER_SELECTABLE_P)
+    {
+      target_byte_order = LITTLE_ENDIAN;
+      target_byte_order_auto = 0;
+    }
+  else
+    {
+      printf_unfiltered ("Byte order is not selectable.");
+      show_endian (args, from_tty);
+    }
+}
+
+/* Called by ``set endian auto''.  */
+static void set_endian_auto PARAMS ((char *, int));
+static void
+set_endian_auto (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (TARGET_BYTE_ORDER_SELECTABLE_P)
+    {
+      target_byte_order_auto = 1;
+    }
+  else
+    {
+      printf_unfiltered ("Byte order is not selectable.");
+      show_endian (args, from_tty);
+    }
+}
+
+/* Set the endianness from a BFD.  */
+static void set_endian_from_file PARAMS ((bfd *));
+static void
+set_endian_from_file (abfd)
+     bfd *abfd;
+{
+  if (TARGET_BYTE_ORDER_SELECTABLE_P)
+    {
+      int want;
+      
+      if (bfd_big_endian (abfd))
+	want = BIG_ENDIAN;
+      else
+	want = LITTLE_ENDIAN;
+      if (TARGET_BYTE_ORDER_AUTO)
+	target_byte_order = want;
+      else if (TARGET_BYTE_ORDER != want)
+	warning ("%s endian file does not match %s endian target.",
+		 want == BIG_ENDIAN ? "big" : "little",
+		 TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
+    }
+  else
+    {
+      if (bfd_big_endian (abfd)
+	  ? TARGET_BYTE_ORDER != BIG_ENDIAN
+	  : TARGET_BYTE_ORDER == BIG_ENDIAN)
+	warning ("%s endian file does not match %s endian target.",
+		 bfd_big_endian (abfd) ? "big" : "little",
+		 TARGET_BYTE_ORDER == BIG_ENDIAN ? "big" : "little");
+    }
+}
+
+
+
+/* Functions to manipulate the architecture of the target */
+
+int target_architecture_auto = 1;
+extern const struct bfd_arch_info bfd_default_arch_struct;
+const struct bfd_arch_info *target_architecture = &bfd_default_arch_struct;
+int (*target_architecture_hook) PARAMS ((const struct bfd_arch_info *ap));
+
+/* Do the real work of changing the current architecture */
+static void
+set_arch (arch)
+     const struct bfd_arch_info *arch;
+{
+  /* FIXME: Is it compatible with gdb? */
+  /* Check with the target on the setting */
+  if (target_architecture_hook != NULL
+      && !target_architecture_hook (arch))
+    printf_unfiltered ("Target does not support `%s' architecture.\n",
+		       arch->printable_name);
+  else
+    {
+      target_architecture_auto = 0;
+      target_architecture = arch;
+    }
+}
+
+/* Called if the user enters ``show architecture'' without an argument. */
+static void show_architecture PARAMS ((char *, int));
+static void
+show_architecture (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  const char *arch;
+  arch = TARGET_ARCHITECTURE->printable_name;
+  if (target_architecture_auto)
+    printf_filtered ("The target architecture is set automatically (currently %s)\n", arch);
+  else
+    printf_filtered ("The target architecture is assumed to be %s\n", arch);
+}
+
+/* Called if the user enters ``set architecture'' with or without an
+   argument. */
+static void set_architecture PARAMS ((char *, int));
+static void
+set_architecture (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args == NULL)
+    {
+      printf_unfiltered ("\"set architecture\" must be followed by \"auto\" or an architecture name.\n");
+    }
+  else if (strcmp (args, "auto") == 0)
+    {
+      target_architecture_auto = 1;
+    }
+  else
+    {
+      const struct bfd_arch_info *arch = bfd_scan_arch (args);
+      if (arch != NULL)
+	set_arch (arch);
+      else
+	printf_unfiltered ("Architecture `%s' not reconized.\n", args);
+    }
+}
+
+/* Called if the user enters ``info architecture'' without an argument. */
+static void info_architecture PARAMS ((char *, int));
+static void
+info_architecture (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  enum bfd_architecture a;
+  printf_filtered ("Available architectures are:\n");
+  for (a = bfd_arch_obscure + 1; a < bfd_arch_last; a++)
+    {
+      const struct bfd_arch_info *ap = bfd_lookup_arch (a, 0);
+      if (ap != NULL)
+	{
+	  do
+	    {
+	      printf_filtered (" %s", ap->printable_name);
+	      ap = ap->next;
+	    }
+	  while (ap != NULL);
+	  printf_filtered ("\n");
+	}
+    }
+}
+
+/* Set the architecture from arch/machine */
+void
+set_architecture_from_arch_mach (arch, mach)
+     enum bfd_architecture arch;
+     unsigned long mach;
+{
+  const struct bfd_arch_info *wanted = bfd_lookup_arch (arch, mach);
+  if (wanted != NULL)
+    set_arch (wanted);
+  else
+    fatal ("hardwired architecture/machine not reconized");
+}
+
+/* Set the architecture from a BFD */
+static void set_architecture_from_file PARAMS ((bfd *));
+static void
+set_architecture_from_file (abfd)
+     bfd *abfd;
+{
+  const struct bfd_arch_info *wanted = bfd_get_arch_info (abfd);
+  if (target_architecture_auto)
+    {
+      if (target_architecture_hook != NULL
+	  && !target_architecture_hook (wanted))
+	warning ("Target may not support %s architecture",
+		 wanted->printable_name);
+      target_architecture = wanted;
+    }
+  else if (wanted != target_architecture)
+    {
+      warning ("%s architecture file may be incompatible with %s target.",
+	       wanted->printable_name,
+	       target_architecture->printable_name);
+    }
+}
+
+
+
+/* Disassembler */
+
+/* Pointer to the target-dependent disassembly function.  */
+int (*tm_print_insn) PARAMS ((bfd_vma, disassemble_info *));
+disassemble_info tm_print_insn_info;
+
+
+
+/* Set the dynamic target-system-dependant parameters (architecture,
+   byte-order) using information found in the BFD */
+
+void
+set_gdbarch_from_file (abfd)
+     bfd *abfd;
+{
+  set_architecture_from_file (abfd);
+  set_endian_from_file (abfd);
+}
+
+
+extern void _initialize_gdbarch PARAMS ((void));
+void
+_initialize_gdbarch ()
+{
+  add_prefix_cmd ("endian", class_support, set_endian,
+		  "Set endianness of target.",
+		  &endianlist, "set endian ", 0, &setlist);
+  add_cmd ("big", class_support, set_endian_big,
+	   "Set target as being big endian.", &endianlist);
+  add_cmd ("little", class_support, set_endian_little,
+	   "Set target as being little endian.", &endianlist);
+  add_cmd ("auto", class_support, set_endian_auto,
+	   "Select target endianness automatically.", &endianlist);
+  add_cmd ("endian", class_support, show_endian,
+	   "Show endianness of target.", &showlist);
+
+  add_cmd ("architecture", class_support, set_architecture,
+	   "Set architecture of target.", &setlist);
+  add_alias_cmd ("processor", "architecture", class_support, 1, &setlist);
+  add_cmd ("architecture", class_support, show_architecture,
+	   "Show architecture of target.", &showlist);
+  add_cmd ("architecture", class_support, info_architecture,
+	   "List supported target architectures", &infolist);
+
+  INIT_DISASSEMBLE_INFO_NO_ARCH (tm_print_insn_info, gdb_stdout, (fprintf_ftype)fprintf_filtered);
+  tm_print_insn_info.flavour = bfd_target_unknown_flavour;
+  tm_print_insn_info.read_memory_func = dis_asm_read_memory;
+  tm_print_insn_info.memory_error_func = dis_asm_memory_error;
+  tm_print_insn_info.print_address_func = dis_asm_print_address;
+
+#ifdef MAINTENANCE_CMDS
+  add_show_from_set (add_set_cmd ("archdebug",
+				  class_maintenance,
+				  var_zinteger,
+				  (char *)&gdbarch_debug,
+				  "Set architecture debugging.\n\
+When non-zero, architecture debugging is enabled.", &setlist),
+		     &showlist);
+#endif
+}
diff --git a/gdb/gdbarch.h b/gdb/gdbarch.h
new file mode 100644
index 0000000..098db4c
--- /dev/null
+++ b/gdb/gdbarch.h
@@ -0,0 +1,118 @@
+/* Architecture commands for GDB, the GNU debugger.
+   Copyright 1998, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef GDBARCH_H
+#define GDBARCH_H
+
+
+/* The target-system-dependant byte order is dynamic */
+
+/* TARGET_BYTE_ORDER_SELECTABLE_P determines if the target endianness
+   is selectable at runtime.  The user can use the `set endian'
+   command to change it.  TARGET_BYTE_ORDER_AUTO is nonzero when
+   target_byte_order should be auto-detected (from the program image
+   say). */
+
+#ifndef TARGET_BYTE_ORDER_SELECTABLE_P
+/* compat - Catch old targets that define TARGET_BYTE_ORDER_SLECTABLE
+   when they should have defined TARGET_BYTE_ORDER_SELECTABLE_P 1 */
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+#define TARGET_BYTE_ORDER_SELECTABLE_P 1
+#else
+#define TARGET_BYTE_ORDER_SELECTABLE_P 0
+#endif
+#endif
+
+extern int target_byte_order;
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+/* compat - Catch old targets that define TARGET_BYTE_ORDER_SELECTABLE
+   and expect defs.h to re-define TARGET_BYTE_ORDER. */
+#undef TARGET_BYTE_ORDER
+#endif
+#ifndef TARGET_BYTE_ORDER
+#define TARGET_BYTE_ORDER (target_byte_order + 0)
+#endif
+
+extern int target_byte_order_auto;
+#ifndef TARGET_BYTE_ORDER_AUTO
+#define TARGET_BYTE_ORDER_AUTO (target_byte_order_auto + 0)
+#endif
+
+
+
+/* The target-system-dependant BFD architecture is dynamic */
+
+extern int target_architecture_auto;
+#ifndef TARGET_ARCHITECTURE_AUTO
+#define TARGET_ARCHITECTURE_AUTO (target_architecture_auto + 0)
+#endif
+
+extern const struct bfd_arch_info *target_architecture;
+#ifndef TARGET_ARCHITECTURE
+#define TARGET_ARCHITECTURE (target_architecture + 0)
+#endif
+
+/* Notify the target dependant backend of a change to the selected
+   architecture. A zero return status indicates that the target did
+   not like the change. */
+
+extern int (*target_architecture_hook) PARAMS ((const struct bfd_arch_info *)); 
+
+
+
+/* The target-system-dependant disassembler is semi-dynamic */
+
+#include "dis-asm.h"		/* Get defs for disassemble_info */
+
+extern int dis_asm_read_memory PARAMS ((bfd_vma memaddr, bfd_byte *myaddr,
+					int len, disassemble_info *info));
+
+extern void dis_asm_memory_error PARAMS ((int status, bfd_vma memaddr,
+					  disassemble_info *info));
+
+extern void dis_asm_print_address PARAMS ((bfd_vma addr,
+					   disassemble_info *info));
+
+extern int (*tm_print_insn) PARAMS ((bfd_vma, disassemble_info*));
+extern disassemble_info tm_print_insn_info;
+#ifndef TARGET_PRINT_INSN
+#define TARGET_PRINT_INSN(vma, info) (*tm_print_insn) (vma, info)
+#endif
+#ifndef TARGET_PRINT_INSN_INFO
+#define TARGET_PRINT_INSN_INFO (&tm_print_insn_info)
+#endif
+
+
+
+/* Set the dynamic target-system-dependant parameters (architecture,
+   byte-order, ...) using information found in the BFD */
+
+extern void set_gdbarch_from_file PARAMS ((bfd *));
+
+
+/* Explicitly set the dynamic target-system-dependant parameters based
+   on bfd_architecture and machine. */
+
+extern void set_architecture_from_arch_mach PARAMS ((enum bfd_architecture, unsigned long));
+
+
+/* gdbarch trace variable */
+extern int gdbarch_debug;
+
+#endif
diff --git a/gdb/gdbcmd.h b/gdb/gdbcmd.h
new file mode 100644
index 0000000..65b3b7a
--- /dev/null
+++ b/gdb/gdbcmd.h
@@ -0,0 +1,114 @@
+/* Header file for GDB-specific command-line stuff.
+   Copyright 1986, 1989, 1990, 1992 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (GDBCMD_H)
+#define GDBCMD_H 1
+
+#include "command.h"
+
+/* Chain containing all defined commands.  */
+
+extern struct cmd_list_element *cmdlist;
+
+/* Chain containing all defined info subcommands.  */
+
+extern struct cmd_list_element *infolist;
+
+/* Chain containing all defined enable subcommands. */
+
+extern struct cmd_list_element *enablelist;
+
+/* Chain containing all defined disable subcommands. */
+
+extern struct cmd_list_element *disablelist;
+
+/* Chain containing all defined delete subcommands. */
+
+extern struct cmd_list_element *deletelist;
+
+/* Chain containing all defined toggle subcommands. */
+
+extern struct cmd_list_element *togglelist;
+
+/* Chain containing all defined stop subcommands. */
+
+extern struct cmd_list_element *stoplist;
+
+/* Chain containing all defined "enable breakpoint" subcommands. */
+
+extern struct cmd_list_element *enablebreaklist;
+
+/* Chain containing all defined set subcommands */
+
+extern struct cmd_list_element *setlist;
+
+/* Chain containing all defined unset subcommands */
+
+extern struct cmd_list_element *unsetlist;
+
+/* Chain containing all defined show subcommands.  */
+
+extern struct cmd_list_element *showlist;
+
+/* Chain containing all defined \"set history\".  */
+
+extern struct cmd_list_element *sethistlist;
+
+/* Chain containing all defined \"show history\".  */
+
+extern struct cmd_list_element *showhistlist;
+
+/* Chain containing all defined \"unset history\".  */
+
+extern struct cmd_list_element *unsethistlist;
+
+/* Chain containing all defined maintenance subcommands. */
+
+extern struct cmd_list_element *maintenancelist;
+
+/* Chain containing all defined "maintenance info" subcommands. */
+
+extern struct cmd_list_element *maintenanceinfolist;
+
+/* Chain containing all defined "maintenance print" subcommands. */
+
+extern struct cmd_list_element *maintenanceprintlist;
+
+extern struct cmd_list_element *setprintlist;
+
+extern struct cmd_list_element *showprintlist;
+
+extern struct cmd_list_element *setchecklist;
+
+extern struct cmd_list_element *showchecklist;
+
+extern void
+execute_user_command PARAMS ((struct cmd_list_element *, char *));
+
+extern void
+execute_command PARAMS ((char *, int));
+
+enum command_control_type
+execute_control_command PARAMS ((struct command_line *));
+
+void print_command_line PARAMS ((struct command_line *, unsigned int));
+
+extern char **noop_completer PARAMS ((char *, char *));
+
+extern char **filename_completer PARAMS ((char *, char *));
+
+#endif	/* !defined (GDBCMD_H) */
diff --git a/gdb/gdbcore.h b/gdb/gdbcore.h
new file mode 100644
index 0000000..6501e30
--- /dev/null
+++ b/gdb/gdbcore.h
@@ -0,0 +1,169 @@
+/* Machine independent variables that describe the core file under GDB.
+   Copyright 1986, 1987, 1989, 1990, 1992, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Interface routines for core, executable, etc.  */
+
+#if !defined (GDBCORE_H)
+#define GDBCORE_H 1
+
+#include "bfd.h"
+
+/* Return the name of the executable file as a string.
+   ERR nonzero means get error if there is none specified;
+   otherwise return 0 in that case.  */
+
+extern char *get_exec_file PARAMS ((int err));
+
+/* Nonzero if there is a core file.  */
+
+extern int have_core_file_p PARAMS ((void));
+
+/* Read "memory data" from whatever target or inferior we have.
+   Returns zero if successful, errno value if not.  EIO is used for
+   address out of bounds.  If breakpoints are inserted, returns shadow
+   contents, not the breakpoints themselves.  From breakpoint.c.  */
+
+extern int read_memory_nobpt PARAMS ((CORE_ADDR memaddr, char *myaddr,
+				      unsigned len));
+
+/* Report a memory error with error().  */
+
+extern void memory_error PARAMS ((int status, CORE_ADDR memaddr));
+
+/* Like target_read_memory, but report an error if can't read.  */
+
+extern void read_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+
+extern void read_memory_section PARAMS ((CORE_ADDR memaddr, char *myaddr,
+					 int len, asection *bfd_section));
+
+/* Read an integer from debugged memory, given address and number of
+   bytes.  */
+
+extern LONGEST read_memory_integer PARAMS ((CORE_ADDR memaddr, int len));
+
+/* Read an unsigned integer from debugged memory, given address and
+   number of bytes.  */
+
+extern ULONGEST read_memory_unsigned_integer PARAMS ((CORE_ADDR memaddr, int len));
+
+/* Read a null-terminated string from the debuggee's memory, given address,
+ * a buffer into which to place the string, and the maximum available space */ 
+extern void read_memory_string PARAMS ((CORE_ADDR, char *, int));
+
+/* This takes a char *, not void *.  This is probably right, because
+   passing in an int * or whatever is wrong with respect to
+   byteswapping, alignment, different sizes for host vs. target types,
+   etc.  */
+
+extern void write_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+
+extern void generic_search PARAMS ((int len, char *data, char *mask,
+				    CORE_ADDR startaddr, int increment,
+				    CORE_ADDR lorange, CORE_ADDR hirange,
+				    CORE_ADDR *addr_found, char *data_found));
+
+/* Hook for `exec_file_command' command to call.  */
+
+extern void (*exec_file_display_hook) PARAMS ((char *filename));
+
+/* Hook for "file_command", which is more useful than above
+   (because it is invoked AFTER symbols are read, not before) */
+
+extern void (*file_changed_hook) PARAMS ((char *filename));
+
+extern void specify_exec_file_hook PARAMS ((void (*hook) (char *filename)));
+
+/* Binary File Diddlers for the exec and core files */
+
+extern bfd *core_bfd;
+extern bfd *exec_bfd;
+
+/* Whether to open exec and core files read-only or read-write.  */
+
+extern int write_files;
+
+extern void core_file_command PARAMS ((char *filename, int from_tty));
+
+extern void exec_file_attach PARAMS ((char *filename, int from_tty));
+
+extern void exec_file_command PARAMS ((char *filename, int from_tty));
+
+extern void validate_files PARAMS ((void));
+
+extern CORE_ADDR register_addr PARAMS ((int regno, CORE_ADDR blockend));
+
+extern void registers_fetched PARAMS ((void));
+
+#if !defined (KERNEL_U_ADDR)
+extern CORE_ADDR kernel_u_addr;
+#define KERNEL_U_ADDR kernel_u_addr
+#endif
+
+/* The target vector for core files. */
+
+extern struct target_ops core_ops;
+
+/* The current default bfd target.  */
+
+extern char *gnutarget;
+
+extern void set_gnutarget PARAMS ((char *));
+
+/* Structure to keep track of core register reading functions for
+   various core file types.  */
+
+struct core_fns {
+
+  /* BFD flavour that we handle.  Note that bfd_target_unknown_flavour matches
+     anything, and if there is no better match, this function will be called
+     as the default. */
+
+  enum bfd_flavour core_flavour;
+
+  /* Extract the register values out of the core file and store them where
+     `read_register' will find them.
+
+     CORE_REG_SECT points to the register values themselves, read into
+     memory.
+
+     CORE_REG_SIZE is the size of that area.
+
+     WHICH says which set of registers we are handling (0 = int, 2 = float on
+     machines where they are discontiguous).
+
+     REG_ADDR is the offset from u.u_ar0 to the register values relative to
+     core_reg_sect.  This is used with old-fashioned core files to locate the
+     registers in a large upage-plus-stack ".reg" section.  Original upage
+     address X is at location core_reg_sect+x+reg_addr. */
+
+  void (*core_read_registers) PARAMS ((char *core_reg_sect, unsigned core_reg_size,
+				  int which, CORE_ADDR reg_addr));
+
+  /* Finds the next struct core_fns.  They are allocated and initialized
+     in whatever module implements the functions pointed to; an 
+     initializer calls add_core_fns to add them to the global chain.  */
+
+  struct core_fns *next;
+
+};
+
+extern void add_core_fns PARAMS ((struct core_fns *cf));
+
+#endif	/* !defined (GDBCORE_H) */
diff --git a/gdb/gdbinit.in b/gdb/gdbinit.in
new file mode 100644
index 0000000..af97d2c
--- /dev/null
+++ b/gdb/gdbinit.in
@@ -0,0 +1,18 @@
+echo Setting up the environment for debugging gdb.\n
+
+set complaints 1
+
+b fatal
+
+b info_command
+commands
+	silent
+	return
+end
+
+dir @srcdir@
+dir .
+dir @srcdir@/../mmalloc
+dir @srcdir@/../libiberty
+dir @srcdir@/../bfd
+set prompt (top-gdb) 
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
new file mode 100644
index 0000000..b016e13
--- /dev/null
+++ b/gdb/gdbserver/Makefile.in
@@ -0,0 +1,241 @@
+#Copyright 1989, 90, 91, 92, 93, 94, 95, 96, 1997
+#Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+prefix = /usr/local
+
+program_transform_name =
+exec_prefix = $(prefix)
+bindir = $(exec_prefix)/bin
+libdir = $(exec_prefix)/lib
+tooldir = $(libdir)/$(target_alias)
+
+datadir = $(prefix)/share
+mandir = $(prefix)/man
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = $(prefix)/info
+includedir = $(prefix)/include
+
+SHELL = /bin/sh
+
+INSTALL = `cd $(srcdir)/../..;pwd`/install-sh -c
+INSTALL_PROGRAM = $(INSTALL)
+INSTALL_DATA = $(INSTALL)
+
+AR = ar
+AR_FLAGS = qv
+RANLIB = ranlib
+
+# If you are compiling with GCC, make sure that either 1) You use the
+# -traditional flag, or 2) You have the fixed include files where GCC
+# can reach them.  Otherwise the ioctl calls in inflow.c
+# will be incorrectly compiled.  The "fixincludes" script in the gcc
+# distribution will fix your include files up.
+#CC=cc
+#CC=gcc -traditional
+GCC=gcc
+
+# Directory containing source files.  Don't clean up the spacing,
+# this exact string is matched for by the "configure" script.
+srcdir = .
+
+# It is also possible that you will need to add -I/usr/include/sys to the
+# CFLAGS section if your system doesn't have fcntl.h in /usr/include (which 
+# is where it should be according to Posix).
+
+# Set this up with gcc if you have gnu ld and the loader will print out
+# line numbers for undefinded refs.
+#CC-LD=gcc -static
+CC-LD=${CC}
+
+# Where is the "include" directory?  Traditionally ../include or ./include
+INCLUDE_DIR =  ${srcdir}/../../include
+INCLUDE_DEP = $$(INCLUDE_DIR)
+
+# Where are the BFD library?
+BFD_DIR = ../../bfd
+BFD = $(BFD_DIR)/libbfd.a
+BFD_SRC = $(srcdir)/$(BFD_DIR)
+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
+
+# Where is the source dir for the READLINE library?  Traditionally in .. or .
+# (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
+READLINE_DIR = ${srcdir}/../readline
+READLINE_DEP = $$(READLINE_DIR)
+
+# All the includes used for CFLAGS and for lint.
+# -I. for config files.
+# -I${srcdir} possibly for regex.h also.
+# -I${srcdir}/config for more generic config files.
+INCLUDE_CFLAGS = -I. -I${srcdir} -I${srcdir}/.. -I${srcdir}/../config -I$(INCLUDE_DIR)
+
+# M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
+# from the config/ directory.
+GLOBAL_CFLAGS = ${MT_CFLAGS} ${MH_CFLAGS}
+#PROFILE_CFLAGS = -pg
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} \
+	${BFD_CFLAGS} ${INCLUDE_CFLAGS}
+
+# LDFLAGS is specifically reserved for setting from the command line
+# when running make.
+
+# Perhaps should come from parent Makefile
+VERSION = gdbserver-4.12.3
+DIST=gdb
+
+LINT=/usr/5bin/lint
+LINTFLAGS= $(BFD_CFLAGS)
+
+# Host and target-dependent makefile fragments come in here.
+####
+# End of host and target-dependent makefile fragments
+
+# All source files that go into linking GDB remote server.
+
+SFILES = $(srcdir)/low-lynx.c $(srcdir)/low-sparc.c $(srcdir)/low-sun3.c \
+	 $(srcdir)/low-hppabsd.c \
+	 $(srcdir)/utils.c $(srcdir)/server.c $(srcdir)/remote-utils.c
+
+DEPFILES = $(GDBSERVER_DEPFILES)
+
+SOURCES = $(SFILES) $(ALLDEPFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} 
+
+OBS = utils.o $(GDBSERVER_DEPFILES) server.o remote-utils.o
+
+# Prevent Sun make from putting in the machine type.  Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+	${CC} -c ${INTERNAL_CFLAGS} $<
+
+all: gdbserver gdbreplay
+
+# Traditionally "install" depends on "all".  But it may be useful
+# not to; for example, if the user has made some trivial change to a 
+# source file and doesn't care about rebuilding or just wants to save the
+# time it takes for make to check that all is up to date.
+# install-only is intended to address that need.
+install: all install-only
+install-only: 
+	n=`echo gdbserver | sed '$(program_transform_name)'`; \
+	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
+	$(INSTALL_PROGRAM) gdbserver $(bindir)/$$n; \
+	$(INSTALL_DATA) $(srcdir)/gdbserver.1 $(man1dir)/$$n.1
+
+uninstall: force
+	n=`echo gdbserver | sed '$(program_transform_name)'`; \
+	if [ x$$n = x ]; then n=gdbserver; else true; fi; \
+	rm -f $(bindir)/$$n $(man1dir)/$$n.1
+
+installcheck:
+check:
+info dvi:
+install-info:
+clean-info:
+
+gdbserver: $(OBS) ${ADD_DEPS} ${CDEPS}
+	rm -f gdbserver
+	${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbserver $(OBS) \
+	  $(GDBSERVER_LIBS) $(XM_CLIBS)
+
+gdbreplay: gdbreplay.o
+	rm -f gdbreplay
+	${CC-LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o gdbreplay gdbreplay.o \
+	  $(XM_CLIBS)
+
+config.status:
+	@echo "You must configure gdbserver.  Look at the README file for details."
+	@false
+
+# Put the proper machine-specific files first, so M-. on a machine
+# specific routine gets the one for the correct machine.
+# The xyzzy stuff below deals with empty DEPFILES
+TAGS:	${TAGFILES}
+	etags `find ${srcdir}/../config -name $(TM_FILE) -print` \
+	  `find ${srcdir}/../config -name ${XM_FILE} -print` \
+	  `find ${srcdir}/../config -name ${NAT_FILE} -print` \
+	  `for i in yzzy ${DEPFILES}; do \
+	     if [ x$$i != xyzzy ]; then \
+	       echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
+	     fi; \
+	   done` \
+	  ${TAGFILES}
+tags: TAGS
+
+clean:
+	rm -f *.o ${ADD_FILES} *~
+	rm -f gdbserver core make.log
+
+distclean: clean
+	rm -f nm.h tm.h xm.h config.status
+	rm -f Makefile
+
+maintainer-clean realclean: clean
+	rm -f nm.h tm.h xm.h config.status
+	rm -f Makefile
+
+STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
+
+Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
+	$(SHELL) ./config.status
+
+force:
+
+version.c: Makefile
+	echo 'char *version = "$(VERSION)";' >version.c
+
+# GNU Make has an annoying habit of putting *all* the Makefile variables
+# into the environment, unless you include this target as a circumvention.
+# Rumor is that this will be fixed (and this target can be removed)
+# in GNU Make 4.0.
+.NOEXPORT:
+
+# GNU Make 3.63 has a different problem: it keeps tacking command line
+# overrides onto the definition of $(MAKE).  This variable setting
+# will remove them.
+MAKEOVERRIDES=
+
+## This is ugly, but I don't want GNU make to put these variables in
+## the environment.  Older makes will see this as a set of targets
+## with no dependencies and no actions.
+unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
+
+server.o : ${srcdir}/server.c ${srcdir}/server.h
+remote-utils.o : ${srcdir}/remote-utils.c ${srcdir}/server.h
+low-linux.o : ${srcdir}/low-linux.c ${srcdir}/server.h
+low-lynx.o : ${srcdir}/low-lynx.c ${srcdir}/server.h
+low-sim.o : ${srcdir}/low-sim.c ${srcdir}/server.h
+low-sparc.o : $(srcdir)/low-sparc.c $(srcdir)/server.h
+low-sun3.o : $(srcdir)/low-sun3.c $(srcdir)/server.h
+low-hppabsd.o : $(srcdir)/low-hppabsd.c $(srcdir)/server.h
+utils.o : ${srcdir}/utils.c ${srcdir}/server.h
+
+# This is the end of "Makefile.in".
diff --git a/gdb/gdbserver/README b/gdb/gdbserver/README
new file mode 100644
index 0000000..2281bf6
--- /dev/null
+++ b/gdb/gdbserver/README
@@ -0,0 +1,127 @@
+		   README for GDBserver & GDBreplay
+		    by Stu Grossman and Fred Fish
+
+Introduction:
+
+This is GDBserver, a remote server for Un*x-like systems.  It can be used to
+control the execution of a program on a target system from a GDB on a different
+host.  GDB and GDBserver communicate using the standard remote serial protocol
+implemented in remote.c, and various *-stub.c files.  They communicate via
+either a serial line or a TCP connection.
+
+Usage (server (target) side):
+
+First, you need to have a copy of the program you want to debug put onto
+the target system.  The program can be stripped to save space if needed, as
+GDBserver doesn't care about symbols.  All symbol handling is taken care of by
+the GDB running on the host system.
+
+To use the server, you log on to the target system, and run the `gdbserver'
+program.  You must tell it (a) how to communicate with GDB, (b) the name of
+your program, and (c) its arguments.  The general syntax is:
+
+	target> gdbserver COMM PROGRAM [ARGS ...]
+
+For example, using a serial port, you might say:
+
+	target> gdbserver /dev/com1 emacs foo.txt
+
+This tells gdbserver to debug emacs with an argument of foo.txt, and to
+communicate with GDB via /dev/com1.  Gdbserver now waits patiently for the
+host GDB to communicate with it.
+
+To use a TCP connection, you could say:
+
+	target> gdbserver host:2345 emacs foo.txt
+
+This says pretty much the same thing as the last example, except that we are
+going to communicate with the host GDB via TCP.  The `host:2345' argument means
+that we are expecting to see a TCP connection from `host' to local TCP port
+2345.  (Currently, the `host' part is ignored.)  You can choose any number you
+want for the port number as long as it does not conflict with any existing TCP
+ports on the target system.  This same port number must be used in the host
+GDBs `target remote' command, which will be described shortly.  Note that if
+you chose a port number that conflicts with another service, gdbserver will
+print an error message and exit.
+
+Usage (host side):
+
+You need an unstripped copy of the target program on your host system, since
+GDB needs to examine it's symbol tables and such.  Start up GDB as you normally
+would, with the target program as the first argument.  (You may need to use the
+--baud option if the serial line is running at anything except 9600 baud.)
+Ie: `gdb TARGET-PROG', or `gdb --baud BAUD TARGET-PROG'.  After that, the only
+new command you need to know about is `target remote'.  It's argument is either
+a device name (usually a serial device, like `/dev/ttyb'), or a HOST:PORT
+descriptor.  For example:
+
+	(gdb) target remote /dev/ttyb
+
+communicates with the server via serial line /dev/ttyb, and:
+
+	(gdb) target remote the-target:2345
+
+communicates via a TCP connection to port 2345 on host `the-target', where
+you previously started up gdbserver with the same port number.  Note that for
+TCP connections, you must start up gdbserver prior to using the `target remote'
+command, otherwise you may get an error that looks something like
+`Connection refused'.
+
+Building:
+
+Configuring gdbserver you should specify the same machine for host and
+target (which are the machine that gdbserver is going to run on.  This
+is not the same as the machine that gdb is going to run on; building
+gdbserver automatically as part of building a whole tree of tools does
+not currently work if cross-compilation is involved (we don't get the
+right CC in the Makefile, to start with)).
+
+gdbserver should work on sparc-sun-sunos4* or Lynx.  The following
+instructions pertain to Lynx.  To build the server for Lynx, make a
+new copy of the distribution onto a disk that is NFS shared with the
+Lynx system.  Lets say that's in a directory called xyzzy.  Then,
+follow these steps under the host system:
+
+	1) cd xyzzy/gdb/gdbserver
+	2) ../../configure i386-none-lynx
+
+When that completes, do the following on the Lynx system:
+
+	3) cd xyzzy/gdb/gdbserver
+	4) make CC=gcc
+
+It should build with only a minor complaint about NULL being redefined.  That's
+a LynxOS problem, and can be ignored.
+
+It's also possible that you may have a cross-compiler to Lynx.  In that case,
+you can skip the stuff about NFS.  You would replace steps 3 & 4 with:
+
+	make CC=lynx-target-compiler...
+
+Using GDBreplay:
+
+A special hacked down version of gdbserver can be used to replay remote
+debug log files created by gdb.  Before using the gdb "target" command to
+initiate a remote debug session, use "set remotelogfile <filename>" to tell
+gdb that you want to make a recording of the serial or tcp session.  Note
+that when replaying the session, gdb communicates with gdbreplay via tcp,
+regardless of whether the original session was via a serial link or tcp.
+
+Once you are done with the remote debug session, start gdbreplay and
+tell it the name of the log file and the host and port number that gdb
+should connect to (typically the same as the host running gdb):
+
+	$ gdbreplay logfile host:port
+
+Then start gdb (preferably in a different screen or window) and use the
+"target" command to connect to gdbreplay:
+
+	(gdb) target remote host:port
+
+Repeat the same sequence of user commands to gdb that you gave in the
+original debug session.  Gdb should not be able to tell that it is talking
+to gdbreplay rather than a real target, all other things being equal.  Note
+that gdbreplay echos the command lines to stderr, as well as the contents of
+the packets it sends and receives.  The last command echoed by gdbreplay is
+the next command that needs to be typed to gdb to continue the session in
+sync with the original session.
diff --git a/gdb/gdbserver/configure.in b/gdb/gdbserver/configure.in
new file mode 100644
index 0000000..1bbb73c
--- /dev/null
+++ b/gdb/gdbserver/configure.in
@@ -0,0 +1,100 @@
+srcname="Remote GDB server"
+srctrigger=server.c
+gdb_serial_driver=../ser-unix.c
+
+# per-host:
+
+. ${srcdir}/../configure.host
+
+echo "gdbserver/configure.in: host is $host, target is $target"
+
+if [ ! -f ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ]; then
+	echo '***' "GDB remote does not support host ${host}" 1>&2
+	exit 1
+fi
+
+#  We really shouldn't depend on there being a space after XM_FILE= ...
+hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`
+
+# per-target:
+
+. ${srcdir}/../configure.tgt
+
+echo "gdbserver/configure.in: host_cpu is $host_cpu, target_cpu is $target_cpu"
+
+if [ ! -f ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt ]; then
+	echo '***' "GDB remote does not support target ${target}" 1>&2
+	exit 1
+fi
+
+if [ -z "${removing}" ] ; then
+	cat ${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh ${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt | awk '$1 == "#msg" {
+		print substr($0,6)}'
+fi
+
+#  We really shouldn't depend on there being a space after TM_FILE= ...
+targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/../config/${gdb_target_cpu}/${gdb_target}.mt`
+
+if [ "${target}" = "${host}" ] ; then
+	nativefile=`awk '$1 == "NAT_FILE=" { print $2 }' <${srcdir}/../config/${gdb_host_cpu}/${gdb_host}.mh`
+fi
+
+host_makefile_frag=../config/${gdb_host_cpu}/${gdb_host}.mh
+target_makefile_frag=../config/${gdb_target_cpu}/${gdb_target}.mt
+
+# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
+# (NAT_FILE) is not set in the ?config/* file, we don't make the
+# corresponding links.  But we have to remove the xm.h files and tm.h
+# files anyway, e.g. when switching from "configure host" to
+# "configure none".
+
+files=
+links=
+rm -f xm.h
+rm -f ser-hardwire.c
+if [ "${hostfile}" != "" ]; then
+	if [ -f ${srcdir}/../config/${hostfile} ]; then
+		files="${files} ../config/${hostfile}"
+	else
+		files="${files} ../config/${gdb_host_cpu}/${hostfile}"
+	fi
+	links="${links} xm.h"
+
+#	files="${files} ${gdb_serial_driver}"
+#	links="${links} ser-hardwire.c"
+fi
+rm -f tm.h
+if [ "${targetfile}" != "" ]; then
+	if [ -f ${srcdir}/../config/${targetfile} ]; then
+		files="${files} ../config/${targetfile}"
+	else
+		files="${files} ../config/${gdb_target_cpu}/${targetfile}"
+	fi
+	links="${links} tm.h"
+fi
+rm -f nm.h
+if [ "${nativefile}" != "" ]; then
+	if [ -f ${srcdir}/../config/${nativefile} ]; then
+		files="${files} ../config/${nativefile}"
+	else
+		files="${files} ../config/${gdb_host_cpu}/${nativefile}"
+	fi
+	links="${links} nm.h"
+# temporary scaffolding until all hosts have the host/target/native
+# split in place.
+else
+	files="${files} ../config/nm-empty.h"
+	links="${links} nm.h"
+fi
+
+if [ ${target_cpu} = "sparclite" ]; then
+	configdirs="${configdirs} sparclite"
+fi
+
+# post-target:
+
+if [ "${nativefile}" = "" ] ; then
+	sed -e '/^NATDEPFILES= /s//# NATDEPFILES= /' \
+		< Makefile > Makefile.tem
+	mv -f Makefile.tem Makefile
+fi
diff --git a/gdb/gdbserver/gdbreplay.c b/gdb/gdbserver/gdbreplay.c
new file mode 100644
index 0000000..ebe06ba
--- /dev/null
+++ b/gdb/gdbserver/gdbreplay.c
@@ -0,0 +1,318 @@
+/* Replay a remote debug session logfile for GDB.
+   Copyright (C) 1996 Free Software Foundation, Inc.
+   Written by Fred Fish (fnf@cygnus.com) from pieces of gdbserver.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include <sys/file.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <netinet/tcp.h>
+#include <signal.h>
+#include <ctype.h>
+#include <fcntl.h>
+
+/* Sort of a hack... */
+#define EOL (EOF - 1)
+
+static int remote_desc;
+
+/* Print the system error message for errno, and also mention STRING
+   as the file name for which the error was encountered.
+   Then return to command level.  */
+
+void
+perror_with_name (string)
+     char *string;
+{
+  extern int sys_nerr;
+  extern char *sys_errlist[];
+  extern int errno;
+  char *err;
+  char *combined;
+
+  err = (errno < sys_nerr) ? sys_errlist[errno] : "unknown error";
+  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
+  strcpy (combined, string);
+  strcat (combined, ": ");
+  strcat (combined, err);
+  fprintf (stderr, "\n%s.\n", combined);
+  fflush (stderr);
+  exit (1);
+}
+
+static void
+sync_error (fp, desc, expect, got)
+     FILE *fp;
+     char *desc;
+     int expect;
+     int got;
+{
+  fprintf (stderr, "\n%s\n", desc);
+  fprintf (stderr, "At logfile offset %ld, expected '0x%x' got '0x%x'\n",
+	   ftell (fp), expect, got);
+  fflush (stderr);
+  exit (1);
+}
+
+void
+remote_close()
+{
+  close (remote_desc);
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+void
+remote_open (name)
+     char *name;
+{
+  extern char *strchr ();
+
+  if (!strchr (name, ':'))
+    {
+      fprintf (stderr, "%s: Must specify tcp connection as host:addr\n", name);
+      fflush (stderr);
+      exit (1);
+    }
+  else
+    {
+      char *port_str;
+      int port;
+      struct sockaddr_in sockaddr;
+      int tmp;
+      struct protoent *protoent;
+      int tmp_desc;
+
+      port_str = strchr (name, ':');
+
+      port = atoi (port_str + 1);
+
+      tmp_desc = socket (PF_INET, SOCK_STREAM, 0);
+      if (tmp_desc < 0)
+	perror_with_name ("Can't open socket");
+
+      /* Allow rapid reuse of this port. */
+      tmp = 1;
+      setsockopt (tmp_desc, SOL_SOCKET, SO_REUSEADDR, (char *)&tmp,
+		  sizeof(tmp));
+
+      sockaddr.sin_family = PF_INET;
+      sockaddr.sin_port = htons(port);
+      sockaddr.sin_addr.s_addr = INADDR_ANY;
+
+      if (bind (tmp_desc, (struct sockaddr *)&sockaddr, sizeof (sockaddr))
+	  || listen (tmp_desc, 1))
+	perror_with_name ("Can't bind address");
+
+      tmp = sizeof (sockaddr);
+      remote_desc = accept (tmp_desc, (struct sockaddr *)&sockaddr, &tmp);
+      if (remote_desc == -1)
+	perror_with_name ("Accept failed");
+
+      protoent = getprotobyname ("tcp");
+      if (!protoent)
+	perror_with_name ("getprotobyname");
+
+      /* Enable TCP keep alive process. */
+      tmp = 1;
+      setsockopt (tmp_desc, SOL_SOCKET, SO_KEEPALIVE, (char *)&tmp, sizeof(tmp));
+
+      /* Tell TCP not to delay small packets.  This greatly speeds up
+	 interactive response. */
+      tmp = 1;
+      setsockopt (remote_desc, protoent->p_proto, TCP_NODELAY,
+		  (char *)&tmp, sizeof(tmp));
+
+      close (tmp_desc);		/* No longer need this */
+
+      signal (SIGPIPE, SIG_IGN); /* If we don't do this, then gdbreplay simply
+				    exits when the remote side dies.  */
+    }
+
+  fcntl (remote_desc, F_SETFL, FASYNC);
+
+  fprintf (stderr, "Replay logfile using %s\n", name);
+  fflush (stderr);
+}
+
+static int tohex (ch)
+     int ch;
+{
+  if (ch >= '0' && ch <= '9')
+    {
+      return (ch - '0');
+    }
+  if (ch >= 'A' && ch <= 'F')
+    {
+      return (ch - 'A' + 10);
+    }
+  if (ch >= 'a' && ch <= 'f')
+    {
+      return (ch - 'a' + 10);
+    }
+  fprintf (stderr, "\nInvalid hex digit '%c'\n", ch);
+  fflush (stderr);
+  exit (1);
+}
+
+static int
+logchar (fp)
+     FILE *fp;
+{
+  int ch;
+  int ch2;
+
+  ch = fgetc (fp);
+  fputc (ch, stdout);
+  fflush (stdout);
+  switch (ch)
+    {
+    case '\n':
+      ch = EOL;
+      break;
+    case '\\':
+      ch = fgetc (fp);
+      fputc (ch, stdout);
+      fflush (stdout);
+      switch (ch)
+	{
+	case '\\': break;
+	case 'b': ch = '\b'; break;
+	case 'f': ch = '\f'; break;
+	case 'n': ch = '\n'; break;
+	case 'r': ch = '\r'; break;
+	case 't': ch = '\t'; break;
+	case 'v': ch = '\v'; break;
+	case 'x':
+	  ch2 = fgetc (fp);
+	  fputc (ch2, stdout);
+	  fflush (stdout);
+	  ch = tohex (ch2) << 4;
+	  ch2 = fgetc (fp);
+	  fputc (ch2, stdout);
+	  fflush (stdout);
+	  ch |= tohex (ch2);
+	  break;
+	default:
+	  /* Treat any other char as just itself */
+	  break;
+	}
+    default:
+      break;
+    }
+  return (ch);
+}
+
+/* Accept input from gdb and match with chars from fp (after skipping one
+   blank) up until a \n is read from fp (which is not matched) */
+
+void
+expect (fp)
+     FILE *fp;
+{
+  int fromlog;
+  unsigned char fromgdb;
+
+  if ((fromlog = logchar (fp)) != ' ')
+    {
+      sync_error (fp, "Sync error during gdb read of leading blank", ' ',
+		  fromlog);
+    }
+  do
+    {
+      fromlog = logchar (fp);
+      if (fromlog == EOL)
+	{
+	  break;
+	}
+      read (remote_desc, &fromgdb, 1);
+    } while (fromlog == fromgdb);
+  if (fromlog != EOL)
+    {
+      sync_error (fp, "Sync error during read of gdb packet", fromlog,
+		  fromgdb);
+    }
+}
+
+/* Play data back to gdb from fp (after skipping leading blank) up until a
+   \n is read from fp (which is discarded and not sent to gdb). */
+
+void
+play (fp)
+     FILE *fp;
+{
+  int fromlog;
+  char ch;
+
+  if ((fromlog = logchar (fp)) != ' ')
+    {
+      sync_error (fp, "Sync error skipping blank during write to gdb", ' ',
+		  fromlog);
+    }
+  while ((fromlog = logchar (fp)) != EOL)
+    {
+      ch = fromlog;
+      write (remote_desc, &ch, 1);
+    }
+}
+
+int
+main (argc, argv)
+     int argc;
+     char *argv[];
+{
+  FILE *fp;
+  int ch;
+
+  if (argc < 3)
+    {
+      fprintf (stderr, "Usage: gdbreplay <logfile> <host:port>\n");
+      fflush (stderr);
+      exit (1);
+    }
+  fp = fopen (argv[1], "r");
+  if (fp == NULL)
+    {
+      perror_with_name (argv[1]);
+    }      
+  remote_open (argv[2]);
+  while ((ch = logchar (fp)) != EOF)
+    {
+      switch (ch)
+	{
+	case 'w':
+	  /* data sent from gdb to gdbreplay, accept and match it */
+	  expect (fp);
+	  break;
+	case 'r':
+	  /* data sent from gdbreplay to gdb, play it */
+	  play (fp);
+	  break;
+	case 'c':
+	  /* Command executed by gdb */
+	  while ((ch = logchar (fp)) != EOL);
+	  break;
+	}
+    }
+  remote_close ();
+  exit (0);
+}
+
diff --git a/gdb/gdbserver/gdbserver.1 b/gdb/gdbserver/gdbserver.1
new file mode 100644
index 0000000..9d3fdcd
--- /dev/null
+++ b/gdb/gdbserver/gdbserver.1
@@ -0,0 +1,103 @@
+.\" Copyright (c) 1993 Free Software Foundation
+.\" See section COPYING for conditions for redistribution
+.TH gdbserver 1 "2 November 1993" "Cygnus Support" "GNU Development Tools"
+.SH NAME
+gdbserver \- Remote Server for the GNU Debugger
+.SH SYNOPSIS
+.na
+.TP
+.B gdbserver
+.RB tty
+.RB prog
+.RB "[\|" args... "\|]"
+.ad b
+.SH DESCRIPTION
+GDBSERVER is a program that allows you to run GDB on a different machine
+than the one which is running the program being debugged.
+
+Usage (server (target) side):
+
+First, you need to have a copy of the program you want to debug put onto
+the target system.  The program can be stripped to save space if needed, as
+GDBserver doesn't care about symbols.  All symbol handling is taken care of by
+the GDB running on the host system.
+
+To use the server, you log on to the target system, and run the `gdbserver'
+program.  You must tell it (a) how to communicate with GDB, (b) the name of
+your program, and (c) its arguments.  The general syntax is:
+
+	target> gdbserver COMM PROGRAM [ARGS ...]
+
+For example, using a serial port, you might say:
+
+	target> gdbserver /dev/com1 emacs foo.txt
+
+This tells gdbserver to debug emacs with an argument of foo.txt, and to
+communicate with GDB via /dev/com1.  Gdbserver now waits patiently for the
+host GDB to communicate with it.
+
+To use a TCP connection, you could say:
+
+	target> gdbserver host:2345 emacs foo.txt
+
+This says pretty much the same thing as the last example, except that we are
+going to communicate with the host GDB via TCP.  The `host:2345' argument means
+that we are expecting to see a TCP connection from `host' to local TCP port
+2345.  (Currently, the `host' part is ignored.)  You can choose any number you
+want for the port number as long as it does not conflict with any existing TCP
+ports on the target system.  This same port number must be used in the host
+GDBs `target remote' command, which will be described shortly.  Note that if
+you chose a port number that conflicts with another service, gdbserver will
+print an error message and exit.
+
+Usage (host side):
+
+You need an unstripped copy of the target program on your host system, since
+GDB needs to examine it's symbol tables and such.  Start up GDB as you normally
+would, with the target program as the first argument.  (You may need to use the
+--baud option if the serial line is running at anything except 9600 baud.)
+Ie: `gdb TARGET-PROG', or `gdb --baud BAUD TARGET-PROG'.  After that, the only
+new command you need to know about is `target remote'.  It's argument is either
+a device name (usually a serial device, like `/dev/ttyb'), or a HOST:PORT
+descriptor.  For example:
+
+	(gdb) target remote /dev/ttyb
+
+communicates with the server via serial line /dev/ttyb, and:
+
+	(gdb) target remote the-target:2345
+
+communicates via a TCP connection to port 2345 on host `the-target', where
+you previously started up gdbserver with the same port number.  Note that for
+TCP connections, you must start up gdbserver prior to using the `target remote'
+command, otherwise you may get an error that looks something like
+`Connection refused'.
+.SH OPTIONS
+You have to supply the name of the program to debug
+and the tty to communicate on; the remote GDB will do everything else.
+Any remaining arguments will be passed to the program verbatim.
+.SH "SEE ALSO"
+.RB "`\|" gdb "\|'"
+entry in
+.B info\c
+\&;
+.I 
+Using GDB: A Guide to the GNU Source-Level Debugger\c
+, Richard M. Stallman and Roland H. Pesch, July 1991.
+.SH COPYING
+Copyright (c) 1993 Free Software Foundation, Inc.
+.PP
+Permission is granted to make and distribute verbatim copies of
+this manual provided the copyright notice and this permission notice
+are preserved on all copies.
+.PP
+Permission is granted to copy and distribute modified versions of this
+manual under the conditions for verbatim copying, provided that the
+entire resulting derived work is distributed under the terms of a
+permission notice identical to this one.
+.PP
+Permission is granted to copy and distribute translations of this
+manual into another language, under the above conditions for modified
+versions, except that this permission notice may be included in
+translations approved by the Free Software Foundation instead of in
+the original English.
diff --git a/gdb/gdbserver/low-hppabsd.c b/gdb/gdbserver/low-hppabsd.c
new file mode 100644
index 0000000..c784d0c
--- /dev/null
+++ b/gdb/gdbserver/low-hppabsd.c
@@ -0,0 +1,379 @@
+/* Low level interface to ptrace, for the remote server for GDB.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <sys/wait.h>
+#include "frame.h"
+#include "inferior.h"
+
+#include <stdio.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sgtty.h>
+#include <fcntl.h>
+
+/***************Begin MY defs*********************/
+int quit_flag = 0;
+char registers[REGISTER_BYTES];
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+
+char buf2[MAX_REGISTER_RAW_SIZE];
+/***************End MY defs*********************/
+
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+
+extern char **environ;
+extern int errno;
+extern int inferior_pid;
+void quit (), perror_with_name ();
+int query ();
+
+/* Start an inferior process and returns its pid.
+   ALLARGS is a vector of program-name and args.
+   ENV is the environment vector to pass.  */
+
+int
+create_inferior (program, allargs)
+     char *program;
+     char **allargs;
+{
+  int pid;
+
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name ("fork");
+
+  if (pid == 0)
+    {
+      ptrace (PT_TRACE_ME, 0, 0, 0, 0);
+
+      execv (program, allargs);
+
+      fprintf (stderr, "Cannot exec %s: %s.\n", program,
+	       errno < sys_nerr ? sys_errlist[errno] : "unknown error");
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ptrace (8, inferior_pid, 0, 0, 0);
+  wait (0);
+  /*************inferior_died ();****VK**************/
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int pid;
+  union wait w;
+
+  pid = wait (&w);
+  if (pid != inferior_pid)
+    perror_with_name ("wait");
+
+  if (WIFEXITED (w))
+    {
+      fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
+      *status = 'W';
+      return ((unsigned char) WEXITSTATUS (w));
+    }
+  else if (!WIFSTOPPED (w))
+    {
+      fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
+      *status = 'X';
+      return ((unsigned char) WTERMSIG (w));
+    }
+
+  fetch_inferior_registers (0);
+
+  *status = 'T';
+  return ((unsigned char) WSTOPSIG (w));
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  ptrace (step ? PT_STEP : PT_CONTINUE, inferior_pid, 1, signal, 0);
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* U_REGS_OFFSET is the offset of the registers within the u area.  */
+#if !defined (U_REGS_OFFSET)
+#define U_REGS_OFFSET \
+  ptrace (PT_READ_U, inferior_pid, \
+          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
+    - KERNEL_U_ADDR
+#endif
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  CORE_ADDR addr;
+
+  if (regno < 0 || regno >= ARCH_NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  REGISTER_U_ADDR (addr, blockend, regno);
+
+  return addr;
+}
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  /* Offset of registers within the u area.  */
+  unsigned int offset;
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+    {
+      errno = 0;
+      *(int *) &registers[ regno * 4 + i] = ptrace (PT_RUREGS, inferior_pid,
+				 (PTRACE_ARG3_TYPE) regaddr, 0, 0);
+      regaddr += sizeof (int);
+      if (errno != 0)
+	{
+	  /* Warning, not error, in case we are attached; sometimes the
+	     kernel doesn't let us at the registers.  */
+	  char *err = strerror (errno);
+	  char *msg = alloca (strlen (err) + 128);
+	  sprintf (msg, "reading register %d: %s", regno, err);
+	  error (msg);
+	  goto error_exit;
+	}
+    }
+ error_exit:;
+}
+
+/* Fetch all registers, or just one, from the child process.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno == -1 || regno == 0)
+    for (regno = 0; regno < NUM_REGS; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+  extern char registers[];
+  register int i;
+  unsigned int offset = U_REGS_OFFSET;
+  int scratch;
+
+  if (regno >= 0)
+    {
+      if (CANNOT_STORE_REGISTER (regno))
+	return;
+      regaddr = register_addr (regno, offset);
+      errno = 0;
+      if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
+        {
+          scratch = *(int *) &registers[REGISTER_BYTE (regno)] | 0x3;
+          ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+                  scratch, 0);
+          if (errno != 0)
+            {
+	      /* Error, even if attached.  Failing to write these two
+		 registers is pretty serious.  */
+              sprintf (buf, "writing register number %d", regno);
+              perror_with_name (buf);
+            }
+        }
+      else
+	for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
+	  {
+	    errno = 0;
+	    ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		    *(int *) &registers[REGISTER_BYTE (regno) + i], 0);
+	    if (errno != 0)
+	      {
+		/* Warning, not error, in case we are attached; sometimes the
+		   kernel doesn't let us at the registers.  */
+		char *err = strerror (errno);
+		char *msg = alloca (strlen (err) + 128);
+		sprintf (msg, "writing register %d: %s",
+			 regno, err);
+		error (msg);
+		return;
+	      }
+	    regaddr += sizeof(int);
+	  }
+    }
+  else
+    for (regno = 0; regno < NUM_REGS; regno++)
+      store_inferior_registers (regno);
+}
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  /* Read all the longwords */
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      buffer[i] = ptrace (1, inferior_pid, addr, 0, 0);
+    }
+
+  /* Copy appropriate bytes out of the buffer.  */
+  memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+  extern int errno;
+
+  /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+  buffer[0] = ptrace (1, inferior_pid, addr, 0, 0);
+
+  if (count > 1)
+    {
+      buffer[count - 1]
+	= ptrace (1, inferior_pid,
+		  addr + (count - 1) * sizeof (int), 0, 0);
+    }
+
+  /* Copy data to be written over corresponding part of buffer */
+
+  memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+  /* Write the entire buffer.  */
+
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      errno = 0;
+      ptrace (4, inferior_pid, addr, buffer[i], 0);
+      if (errno)
+	return errno;
+    }
+
+  return 0;
+}
+
+void
+initialize ()
+{
+  inferior_pid = 0;
+}
+
+int
+have_inferior_p ()
+{
+  return inferior_pid != 0;
+}
diff --git a/gdb/gdbserver/low-linux.c b/gdb/gdbserver/low-linux.c
new file mode 100644
index 0000000..1060210
--- /dev/null
+++ b/gdb/gdbserver/low-linux.c
@@ -0,0 +1,451 @@
+/* Low level interface to ptrace, for the remote server for GDB.
+   Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <sys/wait.h>
+#include "frame.h"
+#include "inferior.h"
+
+#include <stdio.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#if 0
+#include <sgtty.h>
+#endif
+#include <fcntl.h>
+
+/***************Begin MY defs*********************/
+int quit_flag = 0;
+char registers[REGISTER_BYTES];
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+
+char buf2[MAX_REGISTER_RAW_SIZE];
+/***************End MY defs*********************/
+
+#include <sys/ptrace.h>
+
+#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1)
+#include <sys/reg.h>
+#endif
+
+extern char **environ;
+extern int errno;
+extern int inferior_pid;
+void quit (), perror_with_name ();
+int query ();
+
+/* Start an inferior process and returns its pid.
+   ALLARGS is a vector of program-name and args.
+   ENV is the environment vector to pass.  */
+
+int
+create_inferior (program, allargs)
+     char *program;
+     char **allargs;
+{
+  int pid;
+
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name ("fork");
+
+  if (pid == 0)
+    {
+      ptrace (PTRACE_TRACEME, 0, 0, 0);
+
+      execv (program, allargs);
+
+      fprintf (stderr, "Cannot exec %s: %s.\n", program,
+	       errno < sys_nerr ? sys_errlist[errno] : "unknown error");
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ptrace (PTRACE_KILL, inferior_pid, 0, 0);
+  wait (0);
+  /*************inferior_died ();****VK**************/
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int pid;
+  union wait w;
+
+  pid = wait (&w);
+  if (pid != inferior_pid)
+    perror_with_name ("wait");
+
+  if (WIFEXITED (w))
+    {
+      fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
+      *status = 'W';
+      return ((unsigned char) WEXITSTATUS (w));
+    }
+  else if (!WIFSTOPPED (w))
+    {
+      fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
+      *status = 'X';
+      return ((unsigned char) WTERMSIG (w));
+    }
+
+  fetch_inferior_registers (0);
+
+  *status = 'T';
+  return ((unsigned char) WSTOPSIG (w));
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, inferior_pid, 1, signal);
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* U_REGS_OFFSET is the offset of the registers within the u area.  */
+#if !defined (U_REGS_OFFSET)
+#define U_REGS_OFFSET \
+  ptrace (PT_READ_U, inferior_pid, \
+          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
+    - KERNEL_U_ADDR
+#endif
+
+#ifndef TARGET_M68K
+/* this table must line up with REGISTER_NAMES in tm-i386v.h */
+/* symbols like 'EAX' come from <sys/reg.h> */
+static int regmap[] = 
+{
+  EAX, ECX, EDX, EBX,
+  UESP, EBP, ESI, EDI,
+  EIP, EFL, CS, SS,
+  DS, ES, FS, GS,
+};
+
+int
+i386_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+#if 0
+  /* this will be needed if fp registers are reinstated */
+  /* for now, you can look at them with 'info float'
+   * sys5 wont let you change them with ptrace anyway
+   */
+  if (regnum >= FP0_REGNUM && regnum <= FP7_REGNUM) 
+    {
+      int ubase, fpstate;
+      struct user u;
+      ubase = blockend + 4 * (SS + 1) - KSTKSZ;
+      fpstate = ubase + ((char *)&u.u_fpstate - (char *)&u);
+      return (fpstate + 0x1c + 10 * (regnum - FP0_REGNUM));
+    } 
+  else
+#endif
+    return (blockend + 4 * regmap[regnum]);
+  
+}
+#else /* TARGET_M68K */
+/* This table must line up with REGISTER_NAMES in tm-m68k.h */
+static int regmap[] = 
+{
+#ifdef PT_D0
+  PT_D0, PT_D1, PT_D2, PT_D3, PT_D4, PT_D5, PT_D6, PT_D7,
+  PT_A0, PT_A1, PT_A2, PT_A3, PT_A4, PT_A5, PT_A6, PT_USP,
+  PT_SR, PT_PC,
+#else
+  14, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15,
+  17, 18,
+#endif
+#ifdef PT_FP0
+  PT_FP0, PT_FP1, PT_FP2, PT_FP3, PT_FP4, PT_FP5, PT_FP6, PT_FP7,
+  PT_FPCR, PT_FPSR, PT_FPIAR
+#else
+  21, 24, 27, 30, 33, 36, 39, 42, 45, 46, 47
+#endif
+};
+
+/* BLOCKEND is the value of u.u_ar0, and points to the place where GS
+   is stored.  */
+
+int
+m68k_linux_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+    return (blockend + 4 * regmap[regnum]);
+}
+#endif
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  CORE_ADDR addr;
+
+  if (regno < 0 || regno >= ARCH_NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  REGISTER_U_ADDR (addr, blockend, regno);
+
+  return addr;
+}
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  register int i;
+
+  /* Offset of registers within the u area.  */
+  unsigned int offset;
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+    {
+      errno = 0;
+      *(int *) &registers[ regno * 4 + i] = ptrace (PTRACE_PEEKUSR, inferior_pid,
+				 (PTRACE_ARG3_TYPE) regaddr, 0);
+      regaddr += sizeof (int);
+      if (errno != 0)
+	{
+	  /* Warning, not error, in case we are attached; sometimes the
+	     kernel doesn't let us at the registers.  */
+	  char *err = strerror (errno);
+	  char *msg = alloca (strlen (err) + 128);
+	  sprintf (msg, "reading register %d: %s", regno, err);
+	  error (msg);
+	  goto error_exit;
+	}
+    }
+ error_exit:;
+}
+
+/* Fetch all registers, or just one, from the child process.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno == -1 || regno == 0)
+    for (regno = 0; regno < NUM_REGS-NUM_FREGS; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  register int i;
+  unsigned int offset = U_REGS_OFFSET;
+
+  if (regno >= 0)
+    {
+#if 0
+      if (CANNOT_STORE_REGISTER (regno))
+	return;
+#endif
+      regaddr = register_addr (regno, offset);
+      errno = 0;
+#if 0
+      if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
+        {
+          scratch = *(int *) &registers[REGISTER_BYTE (regno)] | 0x3;
+          ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+                  scratch, 0);
+          if (errno != 0)
+            {
+	      /* Error, even if attached.  Failing to write these two
+		 registers is pretty serious.  */
+              sprintf (buf, "writing register number %d", regno);
+              perror_with_name (buf);
+            }
+        }
+      else
+#endif
+	for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
+	  {
+	    errno = 0;
+	    ptrace (PTRACE_POKEUSR, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		    *(int *) &registers[REGISTER_BYTE (regno) + i]);
+	    if (errno != 0)
+	      {
+		/* Warning, not error, in case we are attached; sometimes the
+		   kernel doesn't let us at the registers.  */
+		char *err = strerror (errno);
+		char *msg = alloca (strlen (err) + 128);
+		sprintf (msg, "writing register %d: %s",
+			 regno, err);
+		error (msg);
+		return;
+	      }
+	    regaddr += sizeof(int);
+	  }
+    }
+  else
+    for (regno = 0; regno < NUM_REGS-NUM_FREGS; regno++)
+      store_inferior_registers (regno);
+}
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+void
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  /* Read all the longwords */
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      buffer[i] = ptrace (PTRACE_PEEKTEXT, inferior_pid, addr, 0);
+    }
+
+  /* Copy appropriate bytes out of the buffer.  */
+  memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+  extern int errno;
+
+  /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+  buffer[0] = ptrace (PTRACE_PEEKTEXT, inferior_pid, addr, 0);
+
+  if (count > 1)
+    {
+      buffer[count - 1]
+	= ptrace (PTRACE_PEEKTEXT, inferior_pid,
+		  addr + (count - 1) * sizeof (int), 0);
+    }
+
+  /* Copy data to be written over corresponding part of buffer */
+
+  memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+  /* Write the entire buffer.  */
+
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      errno = 0;
+      ptrace (PTRACE_POKETEXT, inferior_pid, addr, buffer[i]);
+      if (errno)
+	return errno;
+    }
+
+  return 0;
+}
+
+void
+initialize ()
+{
+  inferior_pid = 0;
+}
+
+int
+have_inferior_p ()
+{
+  return inferior_pid != 0;
+}
diff --git a/gdb/gdbserver/low-lynx.c b/gdb/gdbserver/low-lynx.c
new file mode 100644
index 0000000..3444f7a
--- /dev/null
+++ b/gdb/gdbserver/low-lynx.c
@@ -0,0 +1,746 @@
+/* Low level interface to ptrace, for the remote server for GDB.
+   Copyright (C) 1986, 1987, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "server.h"
+#include "frame.h"
+#include "inferior.h"
+
+#include <stdio.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#define LYNXOS
+#include <sys/mem.h>
+#include <sys/signal.h>
+#include <sys/file.h>
+#include <sys/kernel.h>
+#ifndef __LYNXOS
+#define __LYNXOS
+#endif
+#include <sys/itimer.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/proc.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sgtty.h>
+#include <fcntl.h>
+#include <sys/wait.h>
+#include <sys/fpp.h>
+
+char registers[REGISTER_BYTES];
+
+#include <sys/ptrace.h>
+
+/* Start an inferior process and returns its pid.
+   ALLARGS is a vector of program-name and args. */
+
+int
+create_inferior (program, allargs)
+     char *program;
+     char **allargs;
+{
+  int pid;
+
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name ("fork");
+
+  if (pid == 0)
+    {
+      int pgrp;
+
+      /* Switch child to it's own process group so that signals won't
+	 directly affect gdbserver. */
+
+      pgrp = getpid();
+      setpgrp(0, pgrp);
+      ioctl (0, TIOCSPGRP, &pgrp);
+
+      ptrace (PTRACE_TRACEME, 0, (PTRACE_ARG3_TYPE)0, 0);
+
+      execv (program, allargs);
+
+      fprintf (stderr, "GDBserver (process %d):  Cannot exec %s: %s.\n",
+	       getpid(), program,
+	       errno < sys_nerr ? sys_errlist[errno] : "unknown error");
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ptrace (PTRACE_KILL, inferior_pid, 0, 0);
+  wait (0);
+
+  inferior_pid = 0;
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  /* Arggh.  Apparently pthread_kill only works for threads within
+     the process that calls pthread_kill.
+
+     We want to avoid the lynx signal extensions as they simply don't
+     map well to the generic gdb interface we want to keep.
+
+     All we want to do is determine if a particular thread is alive;
+     it appears as if we can just make a harmless thread specific
+     ptrace call to do that.  */
+  return (ptrace (PTRACE_THREADUSER,
+		  BUILDPID (PIDGET (inferior_pid), pid), 0, 0) != -1);
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int pid;
+  union wait w;
+
+  while (1)
+    {
+      enable_async_io();
+
+      pid = wait (&w);
+
+      disable_async_io();
+
+      if (pid != PIDGET(inferior_pid))
+	perror_with_name ("wait");
+
+      thread_from_wait = w.w_tid;
+      inferior_pid = BUILDPID (inferior_pid, w.w_tid);
+
+      if (WIFSTOPPED(w)
+	  && WSTOPSIG(w) == SIGTRAP)
+	{
+	  int realsig;
+
+	  realsig = ptrace (PTRACE_GETTRACESIG, inferior_pid,
+			    (PTRACE_ARG3_TYPE)0, 0);
+
+	  if (realsig == SIGNEWTHREAD)
+	    {
+	      /* It's a new thread notification.  Nothing to do here since
+		 the machine independent code in wait_for_inferior will
+		 add the thread to the thread list and restart the thread
+		 when pid != inferior_pid and pid is not in the thread list.
+		 We don't even want to muck with realsig -- the code in
+		 wait_for_inferior expects SIGTRAP.  */
+	      ;
+	    }
+	}
+      break;
+    }
+
+  if (WIFEXITED (w))
+    {
+      *status = 'W';
+      return ((unsigned char) WEXITSTATUS (w));
+    }
+  else if (!WIFSTOPPED (w))
+    {
+      *status = 'X';
+      return ((unsigned char) WTERMSIG (w));
+    }
+
+  fetch_inferior_registers (0);
+
+  *status = 'T';
+  return ((unsigned char) WSTOPSIG (w));
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  ptrace (step ? PTRACE_SINGLESTEP_ONE : PTRACE_CONT,
+	  BUILDPID (inferior_pid, cont_thread == -1 ? 0 : cont_thread),
+	  1, signal);
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+#undef offsetof
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+
+/* Mapping between GDB register #s and offsets into econtext.  Must be
+   consistent with REGISTER_NAMES macro in various tmXXX.h files. */
+
+#define X(ENTRY)(offsetof(struct econtext, ENTRY))
+
+#ifdef I386
+/* Mappings from tm-i386v.h */
+
+static int regmap[] =
+{
+  X(eax),
+  X(ecx),
+  X(edx),
+  X(ebx),
+  X(esp),			/* sp */
+  X(ebp),			/* fp */
+  X(esi),
+  X(edi),
+  X(eip),			/* pc */
+  X(flags),			/* ps */
+  X(cs),
+  X(ss),
+  X(ds),
+  X(es),
+  X(ecode),			/* Lynx doesn't give us either fs or gs, so */
+  X(fault),			/* we just substitute these two in the hopes
+				   that they are useful. */
+};
+#endif
+
+#ifdef M68K
+/* Mappings from tm-m68k.h */
+
+static int regmap[] =
+{
+  X(regs[0]),			/* d0 */
+  X(regs[1]),			/* d1 */
+  X(regs[2]),			/* d2 */
+  X(regs[3]),			/* d3 */
+  X(regs[4]),			/* d4 */
+  X(regs[5]),			/* d5 */
+  X(regs[6]),			/* d6 */
+  X(regs[7]),			/* d7 */
+  X(regs[8]),			/* a0 */
+  X(regs[9]),			/* a1 */
+  X(regs[10]),			/* a2 */
+  X(regs[11]),			/* a3 */
+  X(regs[12]),			/* a4 */
+  X(regs[13]),			/* a5 */
+  X(regs[14]),			/* fp */
+  0,				/* sp */
+  X(status),			/* ps */
+  X(pc),
+
+  X(fregs[0*3]),		/* fp0 */
+  X(fregs[1*3]),		/* fp1 */
+  X(fregs[2*3]),		/* fp2 */
+  X(fregs[3*3]),		/* fp3 */
+  X(fregs[4*3]),		/* fp4 */
+  X(fregs[5*3]),		/* fp5 */
+  X(fregs[6*3]),		/* fp6 */
+  X(fregs[7*3]),		/* fp7 */
+
+  X(fcregs[0]),			/* fpcontrol */
+  X(fcregs[1]),			/* fpstatus */
+  X(fcregs[2]),			/* fpiaddr */
+  X(ssw),			/* fpcode */
+  X(fault),			/* fpflags */
+};
+#endif
+
+#ifdef SPARC
+/* Mappings from tm-sparc.h */
+
+#define FX(ENTRY)(offsetof(struct fcontext, ENTRY))
+
+static int regmap[] =
+{
+  -1,				/* g0 */
+  X(g1),
+  X(g2),
+  X(g3),
+  X(g4),
+  -1,				/* g5->g7 aren't saved by Lynx */
+  -1,
+  -1,
+
+  X(o[0]),
+  X(o[1]),
+  X(o[2]),
+  X(o[3]),
+  X(o[4]),
+  X(o[5]),
+  X(o[6]),			/* sp */
+  X(o[7]),			/* ra */
+
+  -1,-1,-1,-1,-1,-1,-1,-1,	/* l0 -> l7 */
+
+  -1,-1,-1,-1,-1,-1,-1,-1,	/* i0 -> i7 */
+
+  FX(f.fregs[0]),		/* f0 */
+  FX(f.fregs[1]),
+  FX(f.fregs[2]),
+  FX(f.fregs[3]),
+  FX(f.fregs[4]),
+  FX(f.fregs[5]),
+  FX(f.fregs[6]),
+  FX(f.fregs[7]),
+  FX(f.fregs[8]),
+  FX(f.fregs[9]),
+  FX(f.fregs[10]),
+  FX(f.fregs[11]),
+  FX(f.fregs[12]),
+  FX(f.fregs[13]),
+  FX(f.fregs[14]),
+  FX(f.fregs[15]),
+  FX(f.fregs[16]),
+  FX(f.fregs[17]),
+  FX(f.fregs[18]),
+  FX(f.fregs[19]),
+  FX(f.fregs[20]),
+  FX(f.fregs[21]),
+  FX(f.fregs[22]),
+  FX(f.fregs[23]),
+  FX(f.fregs[24]),
+  FX(f.fregs[25]),
+  FX(f.fregs[26]),
+  FX(f.fregs[27]),
+  FX(f.fregs[28]),
+  FX(f.fregs[29]),
+  FX(f.fregs[30]),
+  FX(f.fregs[31]),
+
+  X(y),
+  X(psr),
+  X(wim),
+  X(tbr),
+  X(pc),
+  X(npc),
+  FX(fsr),			/* fpsr */
+  -1,				/* cpsr */
+};
+#endif
+
+#ifdef SPARC
+
+/* This routine handles some oddball cases for Sparc registers and LynxOS.
+   In partucular, it causes refs to G0, g5->7, and all fp regs to return zero.
+   It also handles knows where to find the I & L regs on the stack.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+#if 0
+  int whatregs = 0;
+
+#define WHATREGS_FLOAT 1
+#define WHATREGS_GEN 2
+#define WHATREGS_STACK 4
+
+  if (regno == -1)
+    whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
+  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+    whatregs = WHATREGS_STACK;
+  else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
+    whatregs = WHATREGS_FLOAT;
+  else
+    whatregs = WHATREGS_GEN;
+
+  if (whatregs & WHATREGS_GEN)
+    {
+      struct econtext ec;		/* general regs */
+      char buf[MAX_REGISTER_RAW_SIZE];
+      int retval;
+      int i;
+
+      errno = 0;
+      retval = ptrace (PTRACE_GETREGS,
+		       BUILDPID (inferior_pid, general_thread),
+		       (PTRACE_ARG3_TYPE) &ec,
+		       0);
+      if (errno)
+	perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
+  
+      memset (buf, 0, REGISTER_RAW_SIZE (G0_REGNUM));
+      supply_register (G0_REGNUM, buf);
+      supply_register (TBR_REGNUM, (char *)&ec.tbr);
+
+      memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &ec.g1,
+	      4 * REGISTER_RAW_SIZE (G1_REGNUM));
+      for (i = G1_REGNUM; i <= G1_REGNUM + 3; i++)
+	register_valid[i] = 1;
+
+      supply_register (PS_REGNUM, (char *)&ec.psr);
+      supply_register (Y_REGNUM, (char *)&ec.y);
+      supply_register (PC_REGNUM, (char *)&ec.pc);
+      supply_register (NPC_REGNUM, (char *)&ec.npc);
+      supply_register (WIM_REGNUM, (char *)&ec.wim);
+
+      memcpy (&registers[REGISTER_BYTE (O0_REGNUM)], ec.o,
+	      8 * REGISTER_RAW_SIZE (O0_REGNUM));
+      for (i = O0_REGNUM; i <= O0_REGNUM + 7; i++)
+	register_valid[i] = 1;
+    }
+
+  if (whatregs & WHATREGS_STACK)
+    {
+      CORE_ADDR sp;
+      int i;
+
+      sp = read_register (SP_REGNUM);
+
+      target_xfer_memory (sp + FRAME_SAVED_I0,
+			  &registers[REGISTER_BYTE(I0_REGNUM)],
+			  8 * REGISTER_RAW_SIZE (I0_REGNUM), 0);
+      for (i = I0_REGNUM; i <= I7_REGNUM; i++)
+	register_valid[i] = 1;
+
+      target_xfer_memory (sp + FRAME_SAVED_L0,
+			  &registers[REGISTER_BYTE(L0_REGNUM)],
+			  8 * REGISTER_RAW_SIZE (L0_REGNUM), 0);
+      for (i = L0_REGNUM; i <= L0_REGNUM + 7; i++)
+	register_valid[i] = 1;
+    }
+
+  if (whatregs & WHATREGS_FLOAT)
+    {
+      struct fcontext fc;		/* fp regs */
+      int retval;
+      int i;
+
+      errno = 0;
+      retval = ptrace (PTRACE_GETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
+  
+      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fc.f.fregs,
+	      32 * REGISTER_RAW_SIZE (FP0_REGNUM));
+      for (i = FP0_REGNUM; i <= FP0_REGNUM + 31; i++)
+	register_valid[i] = 1;
+
+      supply_register (FPS_REGNUM, (char *)&fc.fsr);
+    }
+#endif
+}
+
+/* This routine handles storing of the I & L regs for the Sparc.  The trick
+   here is that they actually live on the stack.  The really tricky part is
+   that when changing the stack pointer, the I & L regs must be written to
+   where the new SP points, otherwise the regs will be incorrect when the
+   process is started up again.   We assume that the I & L regs are valid at
+   this point.  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+#if 0
+  int whatregs = 0;
+
+  if (regno == -1)
+    whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
+  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+    whatregs = WHATREGS_STACK;
+  else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
+    whatregs = WHATREGS_FLOAT;
+  else if (regno == SP_REGNUM)
+    whatregs = WHATREGS_STACK | WHATREGS_GEN;
+  else
+    whatregs = WHATREGS_GEN;
+
+  if (whatregs & WHATREGS_GEN)
+    {
+      struct econtext ec;		/* general regs */
+      int retval;
+
+      ec.tbr = read_register (TBR_REGNUM);
+      memcpy (&ec.g1, &registers[REGISTER_BYTE (G1_REGNUM)],
+	      4 * REGISTER_RAW_SIZE (G1_REGNUM));
+
+      ec.psr = read_register (PS_REGNUM);
+      ec.y = read_register (Y_REGNUM);
+      ec.pc = read_register (PC_REGNUM);
+      ec.npc = read_register (NPC_REGNUM);
+      ec.wim = read_register (WIM_REGNUM);
+
+      memcpy (ec.o, &registers[REGISTER_BYTE (O0_REGNUM)],
+	      8 * REGISTER_RAW_SIZE (O0_REGNUM));
+
+      errno = 0;
+      retval = ptrace (PTRACE_SETREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &ec,
+		       0);
+      if (errno)
+	perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
+    }
+
+  if (whatregs & WHATREGS_STACK)
+    {
+      int regoffset;
+      CORE_ADDR sp;
+
+      sp = read_register (SP_REGNUM);
+
+      if (regno == -1 || regno == SP_REGNUM)
+	{
+	  if (!register_valid[L0_REGNUM+5])
+	    abort();
+	  target_xfer_memory (sp + FRAME_SAVED_I0,
+			      &registers[REGISTER_BYTE (I0_REGNUM)],
+			      8 * REGISTER_RAW_SIZE (I0_REGNUM), 1);
+
+	  target_xfer_memory (sp + FRAME_SAVED_L0,
+			      &registers[REGISTER_BYTE (L0_REGNUM)],
+			      8 * REGISTER_RAW_SIZE (L0_REGNUM), 1);
+	}
+      else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+	{
+	  if (!register_valid[regno])
+	    abort();
+	  if (regno >= L0_REGNUM && regno <= L0_REGNUM + 7)
+	    regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM)
+	      + FRAME_SAVED_L0;
+	  else
+	    regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (I0_REGNUM)
+	      + FRAME_SAVED_I0;
+	  target_xfer_memory (sp + regoffset, &registers[REGISTER_BYTE (regno)],
+			      REGISTER_RAW_SIZE (regno), 1);
+	}
+    }
+
+  if (whatregs & WHATREGS_FLOAT)
+    {
+      struct fcontext fc;		/* fp regs */
+      int retval;
+
+/* We read fcontext first so that we can get good values for fq_t... */
+      errno = 0;
+      retval = ptrace (PTRACE_GETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
+  
+      memcpy (fc.f.fregs, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	      32 * REGISTER_RAW_SIZE (FP0_REGNUM));
+
+      fc.fsr = read_register (FPS_REGNUM);
+
+      errno = 0;
+      retval = ptrace (PTRACE_SETFPREGS, BUILDPID (inferior_pid, general_thread), (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("Sparc fetch_inferior_registers(ptrace)");
+      }
+#endif
+}
+#endif /* SPARC */
+
+#ifndef SPARC
+
+/* Return the offset relative to the start of the per-thread data to the
+   saved context block.  */
+
+static unsigned long
+lynx_registers_addr()
+{
+  CORE_ADDR stblock;
+  int ecpoff = offsetof(st_t, ecp);
+  CORE_ADDR ecp;
+
+  errno = 0;
+  stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, BUILDPID (inferior_pid, general_thread),
+				(PTRACE_ARG3_TYPE)0, 0);
+  if (errno)
+    perror_with_name ("PTRACE_THREADUSER");
+
+  ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, BUILDPID (inferior_pid, general_thread),
+			    (PTRACE_ARG3_TYPE)ecpoff, 0);
+  if (errno)
+    perror_with_name ("lynx_registers_addr(PTRACE_PEEKTHREAD)");
+
+  return ecp - stblock;
+}
+
+/* Fetch one or more registers from the inferior.  REGNO == -1 to get
+   them all.  We actually fetch more than requested, when convenient,
+   marking them as valid so we won't fetch them again.  */
+
+void
+fetch_inferior_registers (ignored)
+     int ignored;
+{
+  int regno;
+  unsigned long reg;
+  unsigned long ecp;
+
+  ecp = lynx_registers_addr();
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      int ptrace_fun = PTRACE_PEEKTHREAD;
+
+#ifdef PTRACE_PEEKUSP
+      ptrace_fun = regno == SP_REGNUM ? PTRACE_PEEKUSP : PTRACE_PEEKTHREAD;
+#endif
+
+      errno = 0;
+      reg = ptrace (ptrace_fun, BUILDPID (inferior_pid, general_thread),
+		    (PTRACE_ARG3_TYPE) (ecp + regmap[regno]), 0);
+      if (errno)
+	perror_with_name ("fetch_inferior_registers(PTRACE_PEEKTHREAD)");
+  
+      *(unsigned long *)&registers[REGISTER_BYTE (regno)] = reg;
+    }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (ignored)
+     int ignored;
+{
+  int regno;
+  unsigned long reg;
+  unsigned long ecp;
+
+  ecp = lynx_registers_addr();
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      int ptrace_fun = PTRACE_POKEUSER;
+
+#ifdef PTRACE_POKEUSP
+      ptrace_fun = regno == SP_REGNUM ? PTRACE_POKEUSP : PTRACE_POKEUSER;
+#endif
+
+      reg = *(unsigned long *)&registers[REGISTER_BYTE (regno)];
+
+      errno = 0;
+      ptrace (ptrace_fun, BUILDPID (inferior_pid, general_thread),
+	      (PTRACE_ARG3_TYPE) (ecp + regmap[regno]), reg);
+      if (errno)
+	perror_with_name ("PTRACE_POKEUSER");
+    }
+}
+
+#endif /* ! SPARC */
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+void
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  /* Read all the longwords */
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      buffer[i] = ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread), addr, 0);
+    }
+
+  /* Copy appropriate bytes out of the buffer.  */
+  memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+  extern int errno;
+
+  /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+  buffer[0] = ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread), addr, 0);
+
+  if (count > 1)
+    {
+      buffer[count - 1]
+	= ptrace (PTRACE_PEEKTEXT, BUILDPID (inferior_pid, general_thread),
+		  addr + (count - 1) * sizeof (int), 0);
+    }
+
+  /* Copy data to be written over corresponding part of buffer */
+
+  memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+  /* Write the entire buffer.  */
+
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      while (1)
+	{
+	  errno = 0;
+	  ptrace (PTRACE_POKETEXT, BUILDPID (inferior_pid, general_thread), addr, buffer[i]);
+	  if (errno)
+	    {
+	      fprintf(stderr, "\
+ptrace (PTRACE_POKETEXT): errno=%d, pid=0x%x, addr=0x%x, buffer[i] = 0x%x\n",
+		      errno, BUILDPID (inferior_pid, general_thread),
+		      addr, buffer[i]);
+	      fprintf(stderr, "Sleeping for 1 second\n");
+	      sleep(1);
+	    }
+	  else
+	    break;
+	}
+    }
+
+  return 0;
+}
diff --git a/gdb/gdbserver/low-sim.c b/gdb/gdbserver/low-sim.c
new file mode 100644
index 0000000..8ad6e91
--- /dev/null
+++ b/gdb/gdbserver/low-sim.c
@@ -0,0 +1,289 @@
+/* Low level interface to simulators, for the remote server for GDB.
+   Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "server.h"
+#include "callback.h"   /* GDB simulator callback interface */
+#include "remote-sim.h" /* GDB simulator interface */
+
+extern int remote_debug;
+
+extern host_callback default_callback;	/* in sim/common/callback.c */
+
+char registers[REGISTER_BYTES] __attribute__ ((aligned));
+
+int target_byte_order;	/* used by simulator */
+
+/* We record the result of sim_open so we can pass it
+   back to the other sim_foo routines.  */
+static SIM_DESC gdbsim_desc = 0;
+
+/* This version of "load" should be usable for any simulator that
+   does not support loading itself.  */
+
+static void
+generic_load (loadfile_bfd)
+    bfd *loadfile_bfd;
+{
+  asection *s;
+
+  for (s = loadfile_bfd->sections; s; s = s->next) 
+    {
+      if (s->flags & SEC_LOAD) 
+	{
+	  bfd_size_type size;
+
+	  size = bfd_get_section_size_before_reloc (s);
+	  if (size > 0)
+	    {
+	      char *buffer;
+	      bfd_vma lma;	/* use load address, not virtual address */
+
+	      buffer = xmalloc (size);
+	      lma = s->lma;
+
+	      /* Is this really necessary?  I guess it gives the user something
+		 to look at during a long download.  */
+	      printf ("Loading section %s, size 0x%lx lma 0x%lx\n",
+		      bfd_get_section_name (loadfile_bfd, s),
+		      (unsigned long) size,
+		      (unsigned long) lma); /* chops high 32 bits.  FIXME!! */
+
+	      bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
+
+	      write_inferior_memory (lma, buffer, size);
+	      free (buffer);
+	    }
+	}
+    }
+
+  printf ("Start address 0x%lx\n",
+	  (unsigned long)loadfile_bfd->start_address);
+
+  /* We were doing this in remote-mips.c, I suspect it is right
+     for other targets too.  */
+  /* write_pc (loadfile_bfd->start_address); */	/* FIXME!! */
+}
+
+int
+create_inferior (program, argv)
+     char *program;
+     char **argv;
+{
+  bfd *abfd;
+  int pid = 0;
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+  char **new_argv;
+  int nargs;
+#endif
+
+  abfd = bfd_openr (program, 0);
+  if (!abfd) 
+    {
+      fprintf (stderr, "gdbserver: can't open %s: %s\n", 
+	       program, bfd_errmsg (bfd_get_error ()));
+      exit (1);
+    }
+
+  if (!bfd_check_format (abfd, bfd_object))
+    {
+      fprintf (stderr, "gdbserver: unknown load format for %s: %s\n",
+	       program, bfd_errmsg (bfd_get_error ()));
+      exit (1);
+    }
+
+#ifdef TARGET_BYTE_ORDER_SELECTABLE
+  /* Add "-E big" or "-E little" to the argument list depending on the
+     endianness of the program to be loaded.  */
+  for (nargs = 0; argv[nargs] != NULL; nargs++)		/* count the args */
+    ;
+  new_argv = alloca (sizeof (char *) * (nargs + 3));	/* allocate new args */
+  for (nargs = 0; argv[nargs] != NULL; nargs++)		/* copy old to new */
+    new_argv[nargs] = argv[nargs];
+  new_argv[nargs] = "-E";
+  new_argv[nargs + 1] = bfd_big_endian (abfd) ? "big" : "little";
+  new_argv[nargs + 2] = NULL;
+  argv = new_argv;
+#endif
+
+  /* Create an instance of the simulator.  */
+  default_callback.init (&default_callback);
+  gdbsim_desc = sim_open (SIM_OPEN_STANDALONE, &default_callback, abfd, argv);
+  if (gdbsim_desc == 0)
+    exit (1);
+
+  /* Load the program into the simulator.  */
+  if (abfd)
+    if (sim_load (gdbsim_desc, program, NULL, 0) == SIM_RC_FAIL)
+      generic_load (abfd);
+
+  /* Create an inferior process in the simulator.  This initializes SP.  */
+  sim_create_inferior (gdbsim_desc, abfd, argv, /* env */ NULL);
+  sim_resume (gdbsim_desc, 1, 0);	/* execute one instr */
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  sim_close (gdbsim_desc, 0);
+  default_callback.shutdown (&default_callback);
+}
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  sim_fetch_register (gdbsim_desc, regno, &registers[REGISTER_BYTE (regno)],
+		      REGISTER_RAW_SIZE (regno));
+}
+
+/* Fetch all registers, or just one, from the child process.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno == -1 || regno == 0)
+    for (regno = 0; regno < NUM_REGS/*-NUM_FREGS*/; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  if (regno  == -1) 
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	store_inferior_registers (regno);
+    }
+  else
+    sim_store_register (gdbsim_desc, regno, &registers[REGISTER_BYTE (regno)],
+			REGISTER_RAW_SIZE (regno));
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int sigrc;
+  enum sim_stop reason;
+
+  sim_stop_reason (gdbsim_desc, &reason, &sigrc);
+  switch (reason)
+    {
+    case sim_exited:
+      if (remote_debug)
+	printf ("\nChild exited with retcode = %x \n", sigrc);
+      *status = 'W';
+      return sigrc;
+
+#if 0
+    case sim_stopped:
+      if (remote_debug)
+	printf ("\nChild terminated with signal = %x \n", sigrc);
+      *status = 'X';
+      return sigrc;
+#endif
+
+    default:   /* should this be sim_signalled or sim_stopped?  FIXME!! */
+      if (remote_debug)
+	printf ("\nChild received signal = %x \n", sigrc);
+      fetch_inferior_registers (0);
+      *status = 'T';
+      return (unsigned char) sigrc;
+    }
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signo)
+     int step;
+     int signo;
+{
+  /* Should be using target_signal_to_host() or signal numbers in target.h
+     to convert GDB signal number to target signal number.  */
+  sim_resume (gdbsim_desc, step, signo);
+}
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+void
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  sim_read (gdbsim_desc, memaddr, myaddr, len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  sim_write (gdbsim_desc, memaddr, myaddr, len);  /* should check for error.  FIXME!! */
+  return 0;
+}
+
+#if 0
+void
+initialize ()
+{
+  inferior_pid = 0;
+}
+
+int
+have_inferior_p ()
+{
+  return inferior_pid != 0;
+}
+#endif
diff --git a/gdb/gdbserver/low-sparc.c b/gdb/gdbserver/low-sparc.c
new file mode 100644
index 0000000..ddffaec
--- /dev/null
+++ b/gdb/gdbserver/low-sparc.c
@@ -0,0 +1,334 @@
+/* Low level interface to ptrace, for the remote server for GDB.
+   Copyright (C) 1986, 1987, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <sys/wait.h>
+#include "frame.h"
+#include "inferior.h"
+/***************************
+#include "initialize.h"
+****************************/
+
+#include <stdio.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sgtty.h>
+#include <fcntl.h>
+
+/***************Begin MY defs*********************/
+int quit_flag = 0;
+char registers[REGISTER_BYTES];
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+
+char buf2[MAX_REGISTER_RAW_SIZE];
+/***************End MY defs*********************/
+
+#include <sys/ptrace.h>
+#include <sys/reg.h>
+
+extern int sys_nerr;
+extern char **sys_errlist;
+extern char **environ;
+extern int errno;
+extern int inferior_pid;
+void quit (), perror_with_name ();
+int query ();
+
+/* Start an inferior process and returns its pid.
+   ALLARGS is a vector of program-name and args.
+   ENV is the environment vector to pass.  */
+
+int
+create_inferior (program, allargs)
+     char *program;
+     char **allargs;
+{
+  int pid;
+
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name ("fork");
+
+  if (pid == 0)
+    {
+      ptrace (PTRACE_TRACEME);
+
+      execv (program, allargs);
+
+      fprintf (stderr, "Cannot exec %s: %s.\n", program,
+	       errno < sys_nerr ? sys_errlist[errno] : "unknown error");
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ptrace (8, inferior_pid, 0, 0);
+  wait (0);
+  /*************inferior_died ();****VK**************/
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int pid;
+  union wait w;
+
+  pid = wait (&w);
+  if (pid != inferior_pid)
+    perror_with_name ("wait");
+
+  if (WIFEXITED (w))
+    {
+      fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
+      *status = 'W';
+      return ((unsigned char) WEXITSTATUS (w));
+    }
+  else if (!WIFSTOPPED (w))
+    {
+      fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
+      *status = 'X';
+      return ((unsigned char) WTERMSIG (w));
+    }
+
+  fetch_inferior_registers (0);
+
+  *status = 'T';
+  return ((unsigned char) WSTOPSIG (w));
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, inferior_pid, 1, signal);
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+/* Fetch one or more registers from the inferior.  REGNO == -1 to get
+   them all.  We actually fetch more than requested, when convenient,
+   marking them as valid so we won't fetch them again.  */
+
+void
+fetch_inferior_registers (ignored)
+     int ignored;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+  int i;
+
+  /* Global and Out regs are fetched directly, as well as the control
+     registers.  If we're getting one of the in or local regs,
+     and the stack pointer has not yet been fetched,
+     we have to do that first, since they're found in memory relative
+     to the stack pointer.  */
+
+  if (ptrace (PTRACE_GETREGS, inferior_pid,
+	      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
+    perror("ptrace_getregs");
+      
+  registers[REGISTER_BYTE (0)] = 0;
+  memcpy (&registers[REGISTER_BYTE (1)], &inferior_registers.r_g1,
+	  15 * REGISTER_RAW_SIZE (G0_REGNUM));
+  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps; 
+  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
+  *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = inferior_registers.r_npc;
+  *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = inferior_registers.r_y;
+
+  /* Floating point registers */
+
+  if (ptrace (PTRACE_GETFPREGS, inferior_pid,
+	      (PTRACE_ARG3_TYPE) &inferior_fp_registers,
+	      0))
+    perror("ptrace_getfpregs");
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
+	  sizeof inferior_fp_registers.fpu_fr);
+
+  /* These regs are saved on the stack by the kernel.  Only read them
+     all (16 ptrace calls!) if we really need them.  */
+
+  read_inferior_memory (*(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)],
+			&registers[REGISTER_BYTE (L0_REGNUM)],
+			16*REGISTER_RAW_SIZE (L0_REGNUM));
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (ignored)
+     int ignored;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+  CORE_ADDR sp = *(CORE_ADDR *)&registers[REGISTER_BYTE (SP_REGNUM)];
+
+  write_inferior_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)],
+			 16*REGISTER_RAW_SIZE (L0_REGNUM));
+
+  memcpy (&inferior_registers.r_g1, &registers[REGISTER_BYTE (G1_REGNUM)],
+	  15 * REGISTER_RAW_SIZE (G1_REGNUM));
+
+  inferior_registers.r_ps =
+    *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
+  inferior_registers.r_pc =
+    *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
+  inferior_registers.r_npc =
+    *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)];
+  inferior_registers.r_y =
+    *(int *)&registers[REGISTER_BYTE (Y_REGNUM)];
+
+  if (ptrace (PTRACE_SETREGS, inferior_pid,
+	      (PTRACE_ARG3_TYPE) &inferior_registers, 0))
+    perror("ptrace_setregs");
+
+  memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	  sizeof inferior_fp_registers.fpu_fr);
+
+  if (ptrace (PTRACE_SETFPREGS, inferior_pid,
+	      (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0))
+    perror("ptrace_setfpregs");
+}
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  /* Read all the longwords */
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      buffer[i] = ptrace (1, inferior_pid, addr, 0);
+    }
+
+  /* Copy appropriate bytes out of the buffer.  */
+  memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+  extern int errno;
+
+  /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+  buffer[0] = ptrace (1, inferior_pid, addr, 0);
+
+  if (count > 1)
+    {
+      buffer[count - 1]
+	= ptrace (1, inferior_pid,
+		  addr + (count - 1) * sizeof (int), 0);
+    }
+
+  /* Copy data to be written over corresponding part of buffer */
+
+  bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+
+  /* Write the entire buffer.  */
+
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      errno = 0;
+      ptrace (4, inferior_pid, addr, buffer[i]);
+      if (errno)
+	return errno;
+    }
+
+  return 0;
+}
+
+void
+initialize ()
+{
+  inferior_pid = 0;
+}
+
+int
+have_inferior_p ()
+{
+  return inferior_pid != 0;
+}
diff --git a/gdb/gdbserver/low-sun3.c b/gdb/gdbserver/low-sun3.c
new file mode 100644
index 0000000..c84b79f
--- /dev/null
+++ b/gdb/gdbserver/low-sun3.c
@@ -0,0 +1,313 @@
+/* Low level interface to ptrace, for the remote server for GDB.
+   Copyright (C) 1986, 1987, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "<sys/wait.h>"
+#include "frame.h"
+#include "inferior.h"
+
+#include <stdio.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sgtty.h>
+#include <fcntl.h>
+
+/***************Begin MY defs*********************/
+int quit_flag = 0;
+char registers[REGISTER_BYTES];
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+
+char buf2[MAX_REGISTER_RAW_SIZE];
+/***************End MY defs*********************/
+
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+
+extern int sys_nerr;
+extern char **sys_errlist;
+extern char **environ;
+extern int errno;
+extern int inferior_pid;
+void quit (), perror_with_name ();
+int query ();
+
+/* Start an inferior process and returns its pid.
+   ALLARGS is a vector of program-name and args.
+   ENV is the environment vector to pass.  */
+
+int
+create_inferior (program, allargs)
+     char *program;
+     char **allargs;
+{
+  int pid;
+
+  pid = fork ();
+  if (pid < 0)
+    perror_with_name ("fork");
+
+  if (pid == 0)
+    {
+      ptrace (PTRACE_TRACEME);
+
+      execv (program, allargs);
+
+      fprintf (stderr, "Cannot exec %s: %s.\n", program,
+	       errno < sys_nerr ? sys_errlist[errno] : "unknown error");
+      fflush (stderr);
+      _exit (0177);
+    }
+
+  return pid;
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+  ptrace (8, inferior_pid, 0, 0);
+  wait (0);
+  /*************inferior_died ();****VK**************/
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+mythread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+/* Wait for process, returns status */
+
+unsigned char
+mywait (status)
+     char *status;
+{
+  int pid;
+  union wait w;
+
+  pid = wait (&w);
+  if (pid != inferior_pid)
+    perror_with_name ("wait");
+
+  if (WIFEXITED (w))
+    {
+      fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w));
+      *status = 'W';
+      return ((unsigned char) WEXITSTATUS (w));
+    }
+  else if (!WIFSTOPPED (w))
+    {
+      fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w));
+      *status = 'X';
+      return ((unsigned char) WTERMSIG (w));
+    }
+
+  fetch_inferior_registers (0);
+
+  *status = 'T';
+  return ((unsigned char) WSTOPSIG (w));
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+myresume (step, signal)
+     int step;
+     int signal;
+{
+  errno = 0;
+  ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, inferior_pid, 1, signal);
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+/* Fetch one or more registers from the inferior.  REGNO == -1 to get
+   them all.  We actually fetch more than requested, when convenient,
+   marking them as valid so we won't fetch them again.  */
+
+void
+fetch_inferior_registers (ignored)
+     int ignored;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+#ifdef FP0_REGNUM
+  ptrace (PTRACE_GETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+#endif 
+  
+  memcpy (registers, &inferior_registers, 16 * 4);
+#ifdef FP0_REGNUM
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
+	  sizeof inferior_fp_registers.fps_regs);
+#endif 
+  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
+  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
+#ifdef FP0_REGNUM
+  memcpy
+    (&registers[REGISTER_BYTE (FPC_REGNUM)],
+     &inferior_fp_registers.fps_control,
+     sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
+#endif 
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (ignored)
+     int ignored;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+
+  memcpy (&inferior_registers, registers, 16 * 4);
+#ifdef FP0_REGNUM
+  memcpy (&inferior_fp_registers,
+	  &registers[REGISTER_BYTE (FP0_REGNUM)],
+	  sizeof inferior_fp_registers.fps_regs);
+#endif
+  inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
+  inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
+
+#ifdef FP0_REGNUM
+  memcpy (&inferior_fp_registers.fps_control,
+	  &registers[REGISTER_BYTE (FPC_REGNUM)],
+	  (sizeof inferior_fp_registers
+	   - sizeof inferior_fp_registers.fps_regs));
+#endif
+
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+#if FP0_REGNUM
+  ptrace (PTRACE_SETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+#endif
+}
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  */
+
+read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  /* Read all the longwords */
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      buffer[i] = ptrace (1, inferior_pid, addr, 0);
+    }
+
+  /* Copy appropriate bytes out of the buffer.  */
+  memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.
+   On failure (cannot write the inferior)
+   returns the value of errno.  */
+
+int
+write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & -sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+  = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+  extern int errno;
+
+  /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+  buffer[0] = ptrace (1, inferior_pid, addr, 0);
+
+  if (count > 1)
+    {
+      buffer[count - 1]
+	= ptrace (1, inferior_pid,
+		  addr + (count - 1) * sizeof (int), 0);
+    }
+
+  /* Copy data to be written over corresponding part of buffer */
+
+  memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+  /* Write the entire buffer.  */
+
+  for (i = 0; i < count; i++, addr += sizeof (int))
+    {
+      errno = 0;
+      ptrace (4, inferior_pid, addr, buffer[i]);
+      if (errno)
+	return errno;
+    }
+
+  return 0;
+}
+
+void
+initialize ()
+{
+  inferior_pid = 0;
+}
+
+int
+have_inferior_p ()
+{
+  return inferior_pid != 0;
+}
diff --git a/gdb/gdbserver/remote-utils.c b/gdb/gdbserver/remote-utils.c
new file mode 100644
index 0000000..0a7e0fb
--- /dev/null
+++ b/gdb/gdbserver/remote-utils.c
@@ -0,0 +1,545 @@
+/* Remote utility routines for the remote server for GDB.
+   Copyright (C) 1986, 1989, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "server.h"
+#include "terminal.h"
+#include <stdio.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/file.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <netinet/tcp.h>
+#include <sys/ioctl.h>
+#include <signal.h>
+#include <fcntl.h>
+
+int remote_debug = 0;
+
+static int remote_desc;
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+void
+remote_open (name)
+     char *name;
+{
+  int save_fcntl_flags;
+
+  if (!strchr (name, ':'))
+    {
+      remote_desc = open (name, O_RDWR);
+      if (remote_desc < 0)
+	perror_with_name ("Could not open remote device");
+
+#ifdef HAVE_TERMIOS
+      {
+	struct termios termios;
+	tcgetattr(remote_desc, &termios);
+
+	termios.c_iflag = 0;
+	termios.c_oflag = 0;
+	termios.c_lflag = 0;
+	termios.c_cflag &= ~(CSIZE|PARENB);
+	termios.c_cflag |= CLOCAL | CS8;
+	termios.c_cc[VMIN] = 0;
+	termios.c_cc[VTIME] = 0;
+
+	tcsetattr(remote_desc, TCSANOW, &termios);
+      }
+#endif
+
+#ifdef HAVE_TERMIO
+      {
+	struct termio termio;
+	ioctl (remote_desc, TCGETA, &termio);
+
+	termio.c_iflag = 0;
+	termio.c_oflag = 0;
+	termio.c_lflag = 0;
+	termio.c_cflag &= ~(CSIZE|PARENB);
+	termio.c_cflag |= CLOCAL | CS8;
+	termio.c_cc[VMIN] = 0;
+	termio.c_cc[VTIME] = 0;
+
+	ioctl (remote_desc, TCSETA, &termio);
+      }
+#endif
+
+#ifdef HAVE_SGTTY
+      {
+	struct sgttyb sg;
+
+	ioctl (remote_desc, TIOCGETP, &sg);
+	sg.sg_flags = RAW;
+	ioctl (remote_desc, TIOCSETP, &sg);
+      }
+#endif
+
+
+    }
+  else
+    {
+      char *port_str;
+      int port;
+      struct sockaddr_in sockaddr;
+      int tmp;
+      struct protoent *protoent;
+      int tmp_desc;
+
+      port_str = strchr (name, ':');
+
+      port = atoi (port_str + 1);
+
+      tmp_desc = socket (PF_INET, SOCK_STREAM, 0);
+      if (tmp_desc < 0)
+	perror_with_name ("Can't open socket");
+
+      /* Allow rapid reuse of this port. */
+      tmp = 1;
+      setsockopt (tmp_desc, SOL_SOCKET, SO_REUSEADDR, (char *)&tmp,
+		  sizeof(tmp));
+
+      sockaddr.sin_family = PF_INET;
+      sockaddr.sin_port = htons(port);
+      sockaddr.sin_addr.s_addr = INADDR_ANY;
+
+      if (bind (tmp_desc, (struct sockaddr *)&sockaddr, sizeof (sockaddr))
+	  || listen (tmp_desc, 1))
+	perror_with_name ("Can't bind address");
+
+      tmp = sizeof (sockaddr);
+      remote_desc = accept (tmp_desc, (struct sockaddr *)&sockaddr, &tmp);
+      if (remote_desc == -1)
+	perror_with_name ("Accept failed");
+
+      protoent = getprotobyname ("tcp");
+      if (!protoent)
+	perror_with_name ("getprotobyname");
+
+      /* Enable TCP keep alive process. */
+      tmp = 1;
+      setsockopt (tmp_desc, SOL_SOCKET, SO_KEEPALIVE, (char *)&tmp, sizeof(tmp));
+
+      /* Tell TCP not to delay small packets.  This greatly speeds up
+	 interactive response. */
+      tmp = 1;
+      setsockopt (remote_desc, protoent->p_proto, TCP_NODELAY,
+		  (char *)&tmp, sizeof(tmp));
+
+      close (tmp_desc);		/* No longer need this */
+
+      signal (SIGPIPE, SIG_IGN); /* If we don't do this, then gdbserver simply
+				    exits when the remote side dies.  */
+    }
+
+#if defined(F_SETFL) && defined (FASYNC)
+  save_fcntl_flags = fcntl (remote_desc, F_GETFL, 0);
+  fcntl (remote_desc, F_SETFL, save_fcntl_flags | FASYNC);
+  disable_async_io ();
+#endif /* FASYNC */
+  fprintf (stderr, "Remote debugging using %s\n", name);
+}
+
+void
+remote_close()
+{
+  close (remote_desc);
+}
+
+/* Convert hex digit A to a number.  */
+
+static int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  else if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  else
+    error ("Reply contains invalid hex digit");
+}
+
+/* Convert number NIB to a hex digit.  */
+
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    return '0' + nib;
+  else
+    return 'a' + nib - 10;
+}
+
+/* Send a packet to the remote machine, with error checking.
+   The data of the packet is in BUF.  Returns >= 0 on success, -1 otherwise. */
+
+int
+putpkt (buf)
+     char *buf;
+{
+  int i;
+  unsigned char csum = 0;
+  char buf2[2000];
+  char buf3[1];
+  int cnt = strlen (buf);
+  char *p;
+
+  /* Copy the packet into buffer BUF2, encapsulating it
+     and giving it a checksum.  */
+
+  p = buf2;
+  *p++ = '$';
+
+  for (i = 0; i < cnt; i++)
+    {
+      csum += buf[i];
+      *p++ = buf[i];
+    }
+  *p++ = '#';
+  *p++ = tohex ((csum >> 4) & 0xf);
+  *p++ = tohex (csum & 0xf);
+
+  *p = '\0';
+
+  /* Send it over and over until we get a positive ack.  */
+
+  do
+    {
+      int cc;
+
+      if (write (remote_desc, buf2, p - buf2) != p - buf2)
+	{
+	  perror ("putpkt(write)");
+	  return -1;
+	}
+
+      if (remote_debug)
+	printf ("putpkt (\"%s\"); [looking for ack]\n", buf2);
+      cc = read (remote_desc, buf3, 1);
+      if (remote_debug)
+	printf ("[received '%c' (0x%x)]\n", buf3[0], buf3[0]);
+      if (cc <= 0)
+	{
+	  if (cc == 0)
+	    fprintf (stderr, "putpkt(read): Got EOF\n");
+	  else
+	    perror ("putpkt(read)");
+
+	  return -1;
+	}
+    }
+  while (buf3[0] != '+');
+
+  return 1;			/* Success! */
+}
+
+/* Come here when we get an input interrupt from the remote side.  This
+   interrupt should only be active while we are waiting for the child to do
+   something.  About the only thing that should come through is a ^C, which
+   will cause us to send a SIGINT to the child.  */
+
+static void
+input_interrupt()
+{
+  int cc;
+  char c;
+
+  cc = read (remote_desc, &c, 1);
+
+  if (cc != 1 || c != '\003')
+    {
+      fprintf(stderr, "input_interrupt, cc = %d c = %d\n", cc, c);
+      return;
+    }
+
+  kill (inferior_pid, SIGINT);
+}
+
+void
+enable_async_io()
+{
+  signal (SIGIO, input_interrupt);
+}
+
+void
+disable_async_io()
+{
+  signal (SIGIO, SIG_IGN);
+}
+
+/* Returns next char from remote GDB.  -1 if error.  */
+
+static int
+readchar ()
+{
+  static char buf[BUFSIZ];
+  static int bufcnt = 0;
+  static char *bufp;
+
+  if (bufcnt-- > 0)
+    return *bufp++ & 0x7f;
+
+  bufcnt = read (remote_desc, buf, sizeof (buf));
+
+  if (bufcnt <= 0)
+    {
+      if (bufcnt == 0)
+	fprintf (stderr, "readchar: Got EOF\n");
+      else
+	perror ("readchar");
+
+      return -1;
+    }
+
+  bufp = buf;
+  bufcnt--;
+  return *bufp++ & 0x7f;
+}
+
+/* Read a packet from the remote machine, with error checking,
+   and store it in BUF.  Returns length of packet, or negative if error. */
+
+int
+getpkt (buf)
+     char *buf;
+{
+  char *bp;
+  unsigned char csum, c1, c2;
+  int c;
+
+  while (1)
+    {
+      csum = 0;
+
+      while (1)
+	{
+	  c = readchar ();
+	  if (c == '$')
+	    break;
+	  if (remote_debug)
+	    printf ("[getpkt: discarding char '%c']\n", c);
+	  if (c < 0)
+	    return -1;
+	}
+
+      bp = buf;
+      while (1)
+	{
+	  c = readchar ();
+	  if (c < 0)
+	    return -1;
+	  if (c == '#')
+	    break;
+	  *bp++ = c;
+	  csum += c;
+	}
+      *bp = 0;
+
+      c1 = fromhex (readchar ());
+      c2 = fromhex (readchar ());
+      
+      if (csum == (c1 << 4) + c2)
+	break;
+
+      fprintf (stderr, "Bad checksum, sentsum=0x%x, csum=0x%x, buf=%s\n",
+	       (c1 << 4) + c2, csum, buf);
+      write (remote_desc, "-", 1);
+    }
+
+  if (remote_debug)
+    printf ("getpkt (\"%s\");  [sending ack] \n", buf);
+
+  write (remote_desc, "+", 1);
+
+  if (remote_debug)
+    printf ("[sent ack]\n");
+  return bp - buf;
+}
+
+void
+write_ok (buf)
+     char *buf;
+{
+  buf[0] = 'O';
+  buf[1] = 'K';
+  buf[2] = '\0';
+}
+
+void
+write_enn (buf)
+     char *buf;
+{
+  buf[0] = 'E';
+  buf[1] = 'N';
+  buf[2] = 'N';
+  buf[3] = '\0';
+}
+
+void
+convert_int_to_ascii (from, to, n)
+     char *from, *to;
+     int n;
+{
+  int nib;
+  char ch;
+  while (n--)
+    {
+      ch = *from++;
+      nib = ((ch & 0xf0) >> 4) & 0x0f;
+      *to++ = tohex (nib);
+      nib = ch & 0x0f;
+      *to++ = tohex (nib);
+    }
+  *to++ = 0;
+}
+
+
+void
+convert_ascii_to_int (from, to, n)
+     char *from, *to;
+     int n;
+{
+  int nib1, nib2;
+  while (n--)
+    {
+      nib1 = fromhex (*from++);
+      nib2 = fromhex (*from++);
+      *to++ = (((nib1 & 0x0f) << 4) & 0xf0) | (nib2 & 0x0f);
+    }
+}
+
+static char *
+outreg(regno, buf)
+     int regno;
+     char *buf;
+{
+  extern char registers[];
+  int regsize = REGISTER_RAW_SIZE (regno);
+
+  *buf++ = tohex (regno >> 4);
+  *buf++ = tohex (regno & 0xf);
+  *buf++ = ':';
+  convert_int_to_ascii (&registers[REGISTER_BYTE (regno)], buf, regsize);
+  buf += 2 * regsize;
+  *buf++ = ';';
+
+  return buf;
+}
+
+void
+prepare_resume_reply (buf, status, signo)
+     char *buf;
+     char status;
+     unsigned char signo;
+{
+  int nib;
+
+  *buf++ = status;
+
+  /* FIXME!  Should be converting this signal number (numbered
+     according to the signal numbering of the system we are running on)
+     to the signal numbers used by the gdb protocol (see enum target_signal
+     in gdb/target.h).  */
+  nib = ((signo & 0xf0) >> 4);
+  *buf++ = tohex (nib);
+  nib = signo & 0x0f;
+  *buf++ = tohex (nib);
+
+  if (status == 'T')
+    {
+      buf = outreg (PC_REGNUM, buf);
+      buf = outreg (FP_REGNUM, buf);
+      buf = outreg (SP_REGNUM, buf);
+#ifdef NPC_REGNUM
+      buf = outreg (NPC_REGNUM, buf);
+#endif
+#ifdef O7_REGNUM
+      buf = outreg (O7_REGNUM, buf);
+#endif
+
+      /* If the debugger hasn't used any thread features, don't burden it with
+	 threads.  If we didn't check this, GDB 4.13 and older would choke.  */
+      if (cont_thread != 0)
+	{
+	  if (old_thread_from_wait != thread_from_wait)
+	    {
+	      sprintf (buf, "thread:%x;", thread_from_wait);
+	      buf += strlen (buf);
+	      old_thread_from_wait = thread_from_wait;
+	    }
+	}
+    }
+  /* For W and X, we're done.  */
+  *buf++ = 0;
+}
+
+void
+decode_m_packet (from, mem_addr_ptr, len_ptr)
+     char *from;
+     CORE_ADDR *mem_addr_ptr;
+     unsigned int *len_ptr;
+{
+  int i = 0, j = 0;
+  char ch;
+  *mem_addr_ptr = *len_ptr = 0;
+
+  while ((ch = from[i++]) != ',')
+    {
+      *mem_addr_ptr = *mem_addr_ptr << 4;
+      *mem_addr_ptr |= fromhex (ch) & 0x0f;
+    }
+
+  for (j = 0; j < 4; j++)
+    {
+      if ((ch = from[i++]) == 0)
+	break;
+      *len_ptr = *len_ptr << 4;
+      *len_ptr |= fromhex (ch) & 0x0f;
+    }
+}
+
+void
+decode_M_packet (from, mem_addr_ptr, len_ptr, to)
+     char *from, *to;
+     CORE_ADDR *mem_addr_ptr;
+     unsigned int *len_ptr;
+{
+  int i = 0;
+  char ch;
+  *mem_addr_ptr = *len_ptr = 0;
+
+  while ((ch = from[i++]) != ',')
+    {
+      *mem_addr_ptr = *mem_addr_ptr << 4;
+      *mem_addr_ptr |= fromhex (ch) & 0x0f;
+    }
+
+  while ((ch = from[i++]) != ':')
+    {
+      *len_ptr = *len_ptr << 4;
+      *len_ptr |= fromhex (ch) & 0x0f;
+    }
+
+  convert_ascii_to_int (&from[i++], to, *len_ptr);
+}
diff --git a/gdb/gdbserver/server.c b/gdb/gdbserver/server.c
new file mode 100644
index 0000000..cdec0f8
--- /dev/null
+++ b/gdb/gdbserver/server.c
@@ -0,0 +1,258 @@
+/* Main code for remote server for GDB.
+   Copyright (C) 1989, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "server.h"
+
+int cont_thread;
+int general_thread;
+int thread_from_wait;
+int old_thread_from_wait;
+int extended_protocol;
+jmp_buf toplevel;
+int inferior_pid;
+
+static unsigned char
+start_inferior (argv, statusptr)
+     char *argv[];
+     char *statusptr;
+{
+  inferior_pid = create_inferior (argv[0], argv);
+  fprintf (stderr, "Process %s created; pid = %d\n", argv[0], inferior_pid);
+
+  /* Wait till we are at 1st instruction in program, return signal number.  */
+  return mywait (statusptr);
+}
+
+extern int remote_debug;
+
+int
+main (argc, argv)
+     int argc;
+     char *argv[];
+{
+  char ch, status, own_buf[2000], mem_buf[2000];
+  int i = 0;
+  unsigned char signal;
+  unsigned int len;
+  CORE_ADDR mem_addr;
+
+  if (setjmp(toplevel))
+    {
+      fprintf(stderr, "Exiting\n");
+      exit(1);
+    }
+
+  if (argc < 3)
+    error("Usage: gdbserver tty prog [args ...]");
+
+  /* Wait till we are at first instruction in program.  */
+  signal = start_inferior (&argv[2], &status);
+
+  /* We are now stopped at the first instruction of the target process */
+
+  while (1)
+    {
+      remote_open (argv[1]);
+
+restart:
+      setjmp(toplevel);
+      while (getpkt (own_buf) > 0)
+	{
+	  unsigned char sig;
+	  i = 0;
+	  ch = own_buf[i++];
+	  switch (ch)
+	    {
+	    case 'd':
+	      remote_debug = !remote_debug;
+	      break;
+	    case '!':
+	      extended_protocol = 1;
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case '?':
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case 'H':
+	      switch (own_buf[1])
+		{
+		case 'g':
+		  general_thread = strtol (&own_buf[2], NULL, 16);
+		  write_ok (own_buf);
+		  fetch_inferior_registers (0);
+		  break;
+		case 'c':
+		  cont_thread = strtol (&own_buf[2], NULL, 16);
+		  write_ok (own_buf);
+		  break;
+		default:
+		  /* Silently ignore it so that gdb can extend the protocol
+		     without compatibility headaches.  */
+		  own_buf[0] = '\0';
+		  break;
+		}
+	      break;
+	    case 'g':
+	      convert_int_to_ascii (registers, own_buf, REGISTER_BYTES);
+	      break;
+	    case 'G':
+	      convert_ascii_to_int (&own_buf[1], registers, REGISTER_BYTES);
+	      store_inferior_registers (-1);
+	      write_ok (own_buf);
+	      break;
+	    case 'm':
+	      decode_m_packet (&own_buf[1], &mem_addr, &len);
+	      read_inferior_memory (mem_addr, mem_buf, len);
+	      convert_int_to_ascii (mem_buf, own_buf, len);
+	      break;
+	    case 'M':
+	      decode_M_packet (&own_buf[1], &mem_addr, &len, mem_buf);
+	      if (write_inferior_memory (mem_addr, mem_buf, len) == 0)
+		write_ok (own_buf);
+	      else
+		write_enn (own_buf);
+	      break;
+	    case 'C':
+	      convert_ascii_to_int (own_buf + 1, &sig, 1);
+	      myresume (0, sig);
+	      signal = mywait (&status);
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case 'S':
+	      convert_ascii_to_int (own_buf + 1, &sig, 1);
+	      myresume (1, sig);
+	      signal = mywait (&status);
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case 'c':
+	      myresume (0, 0);
+	      signal = mywait (&status);
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case 's':
+	      myresume (1, 0);
+	      signal = mywait (&status);
+	      prepare_resume_reply (own_buf, status, signal);
+	      break;
+	    case 'k':
+	      fprintf (stderr, "Killing inferior\n");
+	      kill_inferior ();
+	      /* When using the extended protocol, we start up a new
+		 debugging session.   The traditional protocol will
+	         exit instead.  */
+	      if (extended_protocol)
+		{
+		  write_ok (own_buf);
+		  fprintf (stderr, "GDBserver restarting\n");
+
+		  /* Wait till we are at 1st instruction in prog.  */
+		  signal = start_inferior (&argv[2], &status);
+		  goto restart;
+		  break;
+		}
+	      else
+		{
+		  exit (0);
+		  break;
+		}
+	    case 'T':
+	      if (mythread_alive (strtol (&own_buf[1], NULL, 16)))
+		write_ok (own_buf);
+	      else
+		write_enn (own_buf);
+	      break;
+	    case 'R':
+	      /* Restarting the inferior is only supported in the
+		 extended protocol.  */
+	      if (extended_protocol)
+		{
+		  kill_inferior ();
+		  write_ok (own_buf);
+		  fprintf (stderr, "GDBserver restarting\n");
+
+		  /* Wait till we are at 1st instruction in prog.  */
+		  signal = start_inferior (&argv[2], &status);
+		  goto restart;
+		  break;
+		}
+	      else
+		{
+		  /* It is a request we don't understand.  Respond with an
+		     empty packet so that gdb knows that we don't support this
+		     request.  */
+		  own_buf[0] = '\0';
+		  break;
+		}
+	    default:
+	      /* It is a request we don't understand.  Respond with an
+		 empty packet so that gdb knows that we don't support this
+		 request.  */
+	      own_buf[0] = '\0';
+	      break;
+	    }
+
+	  putpkt (own_buf);
+
+	  if (status == 'W')
+	    fprintf (stderr,
+		     "\nChild exited with status %d\n", sig);
+	  if (status == 'X')
+	    fprintf (stderr, "\nChild terminated with signal = 0x%x\n", sig);
+	  if (status == 'W' || status == 'X')
+	    {
+	      if (extended_protocol)
+		{
+		  fprintf (stderr, "Killing inferior\n");
+		  kill_inferior ();
+		  write_ok (own_buf);
+		  fprintf (stderr, "GDBserver restarting\n");
+
+		  /* Wait till we are at 1st instruction in prog.  */
+		  signal = start_inferior (&argv[2], &status);
+		  goto restart;
+		  break;
+		}
+	      else
+		{
+		  fprintf (stderr, "GDBserver exiting\n");
+		  exit (0);
+		}
+	    }
+	}
+
+      /* We come here when getpkt fails.
+
+	 For the extended remote protocol we exit (and this is the only
+	 way we gracefully exit!).
+
+	 For the traditional remote protocol close the connection,
+	 and re-open it at the top of the loop.  */
+      if (extended_protocol)
+	{
+	  remote_close ();
+	  exit (0);
+	}
+      else
+	{
+	  fprintf (stderr, "Remote side has terminated connection.  GDBserver will reopen the connection.\n");
+
+	  remote_close ();
+	}
+    }
+}
diff --git a/gdb/gdbserver/server.h b/gdb/gdbserver/server.h
new file mode 100644
index 0000000..e23c773
--- /dev/null
+++ b/gdb/gdbserver/server.h
@@ -0,0 +1,72 @@
+/* Common definitions for remote server for GDB.
+   Copyright (C) 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <setjmp.h>
+
+/* Target-specific functions */
+
+int create_inferior PARAMS ((char *program, char **allargs));
+void kill_inferior PARAMS ((void));
+void fetch_inferior_registers PARAMS ((int regno));
+void store_inferior_registers PARAMS ((int regno));
+int mythread_alive PARAMS ((int pid));
+void myresume PARAMS ((int step, int signo));
+unsigned char mywait PARAMS ((char *status));
+void read_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+int write_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+int create_inferior ();
+
+/* Target-specific variables */
+
+extern char registers[];
+
+/* Public variables in server.c */
+
+extern int cont_thread;
+extern int general_thread;
+extern int thread_from_wait;
+extern int old_thread_from_wait;
+
+extern jmp_buf toplevel;
+extern int inferior_pid;
+
+/* Functions from remote-utils.c */
+
+int putpkt PARAMS ((char *buf));
+int getpkt PARAMS ((char *buf));
+void remote_open PARAMS ((char *name));
+void remote_close PARAMS ((void));
+void write_ok PARAMS ((char *buf));
+void write_enn PARAMS ((char *buf));
+void enable_async_io PARAMS ((void));
+void disable_async_io PARAMS ((void));
+void convert_ascii_to_int PARAMS ((char *from, char *to, int n));
+void convert_int_to_ascii PARAMS ((char *from, char *to, int n));
+void prepare_resume_reply PARAMS ((char *buf, char status, unsigned char sig));
+
+void decode_m_packet PARAMS ((char *from, CORE_ADDR *mem_addr_ptr,
+			     unsigned int *len_ptr));
+void decode_M_packet PARAMS ((char *from, CORE_ADDR *mem_addr_ptr,
+			     unsigned int *len_ptr, char *to));
+
+
+/* Functions from utils.c */
+
+void perror_with_name PARAMS ((char *string));
diff --git a/gdb/gdbserver/utils.c b/gdb/gdbserver/utils.c
new file mode 100644
index 0000000..63d522c
--- /dev/null
+++ b/gdb/gdbserver/utils.c
@@ -0,0 +1,114 @@
+/* General utility routines for the remote server for GDB.
+   Copyright (C) 1986, 1989, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "server.h"
+#include <stdio.h>
+#include <string.h>
+
+/* Generally useful subroutines used throughout the program.  */
+
+/* Print the system error message for errno, and also mention STRING
+   as the file name for which the error was encountered.
+   Then return to command level.  */
+
+void
+perror_with_name (string)
+     char *string;
+{
+  extern int sys_nerr;
+  extern char *sys_errlist[];
+  extern int errno;
+  char *err;
+  char *combined;
+
+  if (errno < sys_nerr)
+    err = sys_errlist[errno];
+  else
+    err = "unknown error";
+
+  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
+  strcpy (combined, string);
+  strcat (combined, ": ");
+  strcat (combined, err);
+
+  error ("%s.", combined);
+}
+
+/* Print an error message and return to command level.
+   STRING is the error message, used as a fprintf string,
+   and ARG is passed as an argument to it.  */
+
+#ifdef ANSI_PROTOTYPES
+NORETURN void
+error (const char *string, ...)
+#else
+void
+error (va_alist)
+     va_dcl
+#endif
+{
+  extern jmp_buf toplevel;
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  va_start (args);
+#endif
+  fflush (stdout);
+#ifdef ANSI_PROTOTYPES
+  vfprintf (stderr, string, args);
+#else
+  {
+    char *string1;
+
+    string1 = va_arg (args, char *);
+    vfprintf (stderr, string1, args);
+  }
+#endif
+  fprintf (stderr, "\n");
+  longjmp(toplevel, 1);
+}
+
+/* Print an error message and exit reporting failure.
+   This is for a error that we cannot continue from.
+   STRING and ARG are passed to fprintf.  */
+
+/* VARARGS */
+NORETURN void
+#ifdef ANSI_PROTOTYPES
+fatal (char *string, ...)
+#else
+fatal (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  char *string;
+  va_start (args);
+  string = va_arg (args, char *);
+#endif
+  fprintf (stderr, "gdb: ");
+  vfprintf (stderr, string, args);
+  fprintf (stderr, "\n");
+  va_end (args);
+  exit (1);
+}
diff --git a/gdb/gdbthread.h b/gdb/gdbthread.h
new file mode 100644
index 0000000..653dd65
--- /dev/null
+++ b/gdb/gdbthread.h
@@ -0,0 +1,121 @@
+/* Multi-process/thread control defs for GDB, the GNU debugger.
+   Copyright 1987, 88, 89, 90, 91, 92, 1993, 1998
+
+   Contributed by Lynx Real-Time Systems, Inc.  Los Gatos, CA.
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef GDBTHREAD_H
+#define GDBTHREAD_H
+
+/* For bpstat */
+#include "breakpoint.h"
+
+extern void init_thread_list PARAMS ((void));
+
+extern void add_thread PARAMS ((int pid));
+
+extern void delete_thread PARAMS ((int));
+  
+extern int thread_id_to_pid PARAMS ((int));
+
+extern int in_thread_list PARAMS ((int pid));
+
+extern int pid_to_thread_id PARAMS ((int pid));
+
+extern int valid_thread_id PARAMS ((int thread));
+
+extern void load_infrun_state PARAMS ((int, CORE_ADDR *, CORE_ADDR *, char **,
+				       int *, struct breakpoint **,
+				       struct breakpoint **, CORE_ADDR *,
+				       CORE_ADDR *, CORE_ADDR *, int *, int *,
+                                       int *, bpstat *, int *));
+
+extern void save_infrun_state PARAMS ((int, CORE_ADDR, CORE_ADDR, char *,
+				       int, struct breakpoint *,
+				       struct breakpoint *, CORE_ADDR,
+				       CORE_ADDR, CORE_ADDR, int, int,
+                                       int, bpstat, int));
+
+/* Commands with a prefix of `thread'.  */
+extern struct cmd_list_element *thread_cmd_list;
+
+/* Support for external (remote) systems with threads (processes) */
+/* For example real time operating systems */
+ 
+#define OPAQUETHREADBYTES 8
+/* a 64 bit opaque identifier */
+typedef unsigned char threadref[OPAQUETHREADBYTES] ;
+/* WARNING: This threadref data structure comes from the remote O.S., libstub
+   protocol encoding, and remote.c. it is not particularly changable */
+
+/* Right now, the internal structure is int. We want it to be bigger.
+   Plan to fix this.
+   */
+typedef int gdb_threadref ; /* internal GDB thread reference */
+
+/*  gdb_ext_thread_info is an internal GDB data structure which is
+   equivalint to the reply of the remote threadinfo packet */
+
+struct gdb_ext_thread_info
+{
+  threadref threadid ; /* External form of thread reference */
+  int active ;         /* Has state interesting to GDB? , regs, stack */
+  char display[256] ;  /* Brief state display, name, blocked/syspended */
+  char shortname[32] ; /* To be used to name threads */
+  char more_display[256] ; /* Long info, statistics, queue depth, whatever */
+} ;
+
+/* The volume of remote transfers can be limited by submitting
+   a mask containing bits specifying the desired information.
+   Use a union of these values as the 'selection' parameter to
+   get_thread_info. FIXME: Make these TAG names more thread specific.
+   */
+#define TAG_THREADID 1
+#define TAG_EXISTS 2
+#define TAG_DISPLAY 4
+#define TAG_THREADNAME 8
+#define TAG_MOREDISPLAY 16 
+
+/* Always initialize an instance of this structure using run time assignments */
+/* Because we are likely to add entrtries to it. */
+/* Alternatly, WE COULD ADD THESE TO THE TARGET VECTOR */
+  
+struct target_thread_vector
+{
+  int (*find_new_threads)PARAMS((void)) ;
+  int (*get_thread_info) PARAMS((
+			 gdb_threadref * ref,
+			 int selection,
+			 struct gdb_ext_thread_info * info
+			 )) ;
+  /* to_thread_alive - Already in the target vector */
+  /* to_switch_thread - Done via select frame */
+} ;
+
+extern void bind_target_thread_vector PARAMS((struct target_thread_vector * vec)) ;
+
+extern struct target_thread_vector * unbind_target_thread_vector PARAMS ((void)) ;
+
+extern int target_get_thread_info PARAMS((
+				  gdb_threadref * ref,
+				  int selection,
+				  struct gdb_ext_thread_info * info)) ;
+
+
+#endif	/* GDBTHREAD_H */
diff --git a/gdb/gdbtypes.c b/gdb/gdbtypes.c
new file mode 100644
index 0000000..0393462
--- /dev/null
+++ b/gdb/gdbtypes.c
@@ -0,0 +1,2905 @@
+/* Support routines for manipulating internal types for GDB.
+   Copyright (C) 1992, 93, 94, 95, 96, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Support, using pieces from other GDB modules.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "bfd.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "language.h"
+#include "target.h"
+#include "value.h"
+#include "demangle.h"
+#include "complaints.h"
+#include "gdbcmd.h"
+
+/* These variables point to the objects
+   representing the predefined C data types.  */
+
+struct type *builtin_type_void;
+struct type *builtin_type_char;
+struct type *builtin_type_short;
+struct type *builtin_type_int;
+struct type *builtin_type_long;
+struct type *builtin_type_long_long;
+struct type *builtin_type_signed_char;
+struct type *builtin_type_unsigned_char;
+struct type *builtin_type_unsigned_short;
+struct type *builtin_type_unsigned_int;
+struct type *builtin_type_unsigned_long;
+struct type *builtin_type_unsigned_long_long;
+struct type *builtin_type_float;
+struct type *builtin_type_double;
+struct type *builtin_type_long_double;
+struct type *builtin_type_complex;
+struct type *builtin_type_double_complex;
+struct type *builtin_type_string;
+struct type *builtin_type_int8;
+struct type *builtin_type_uint8;
+struct type *builtin_type_int16;
+struct type *builtin_type_uint16;
+struct type *builtin_type_int32;
+struct type *builtin_type_uint32;
+struct type *builtin_type_int64;
+struct type *builtin_type_uint64;
+struct type *builtin_type_bool;
+
+int opaque_type_resolution = 1;
+
+
+struct extra { char str[128]; int len; }; /* maximum extention is 128! FIXME */
+
+static void add_name PARAMS ((struct extra *, char *));
+static void add_mangled_type PARAMS ((struct extra *, struct type *));
+#if 0
+static void cfront_mangle_name PARAMS ((struct type *, int, int));
+#endif
+static void print_bit_vector PARAMS ((B_TYPE *, int));
+static void print_arg_types PARAMS ((struct type **, int));
+static void dump_fn_fieldlists PARAMS ((struct type *, int));
+static void print_cplus_stuff PARAMS ((struct type *, int));
+
+/* Alloc a new type structure and fill it with some defaults.  If
+   OBJFILE is non-NULL, then allocate the space for the type structure
+   in that objfile's type_obstack. */
+
+struct type *
+alloc_type (objfile)
+     struct objfile *objfile;
+{
+  register struct type *type;
+
+  /* Alloc the structure and start off with all fields zeroed. */
+
+  if (objfile == NULL)
+    {
+      type  = (struct type *) xmalloc (sizeof (struct type));
+    }
+  else
+    {
+      type  = (struct type *) obstack_alloc (&objfile -> type_obstack,
+					     sizeof (struct type));
+      OBJSTAT (objfile, n_types++);
+    }
+  memset ((char *) type, 0, sizeof (struct type));
+
+  /* Initialize the fields that might not be zero. */
+
+  TYPE_CODE (type) = TYPE_CODE_UNDEF;
+  TYPE_OBJFILE (type) = objfile;
+  TYPE_VPTR_FIELDNO (type) = -1;
+  TYPE_CV_TYPE (type) = type;  /* chain back to itself */ 
+
+  return (type);
+}
+
+/* Lookup a pointer to a type TYPE.  TYPEPTR, if nonzero, points
+   to a pointer to memory where the pointer type should be stored.
+   If *TYPEPTR is zero, update it to point to the pointer type we return.
+   We allocate new memory if needed.  */
+
+struct type *
+make_pointer_type (type, typeptr)
+     struct type *type;
+     struct type **typeptr;
+{
+  register struct type *ntype;		/* New type */
+  struct objfile *objfile;
+
+  ntype = TYPE_POINTER_TYPE (type);
+
+  if (ntype) 
+    {
+      if (typeptr == 0)		
+        return ntype;	/* Don't care about alloc, and have new type.  */
+      else if (*typeptr == 0)
+        {
+	  *typeptr = ntype;	/* Tracking alloc, and we have new type.  */
+	  return ntype;
+        }
+    }
+
+  if (typeptr == 0 || *typeptr == 0)	/* We'll need to allocate one.  */
+    {
+      ntype = alloc_type (TYPE_OBJFILE (type));
+      if (typeptr)
+	*typeptr = ntype;
+    }
+  else				/* We have storage, but need to reset it.  */
+    {
+      ntype = *typeptr;
+      objfile = TYPE_OBJFILE (ntype);
+      memset ((char *) ntype, 0, sizeof (struct type));
+      TYPE_OBJFILE (ntype) = objfile;
+    }
+
+  TYPE_TARGET_TYPE (ntype) = type;
+  TYPE_POINTER_TYPE (type) = ntype;
+
+  /* FIXME!  Assume the machine has only one representation for pointers!  */
+
+  TYPE_LENGTH (ntype) = TARGET_PTR_BIT / TARGET_CHAR_BIT;
+  TYPE_CODE (ntype) = TYPE_CODE_PTR;
+
+  /* pointers are unsigned */
+  TYPE_FLAGS (ntype) |= TYPE_FLAG_UNSIGNED;
+  
+  if (!TYPE_POINTER_TYPE (type))	/* Remember it, if don't have one.  */
+    TYPE_POINTER_TYPE (type) = ntype;
+
+  return ntype;
+}
+
+/* Given a type TYPE, return a type of pointers to that type.
+   May need to construct such a type if this is the first use.  */
+
+struct type *
+lookup_pointer_type (type)
+     struct type *type;
+{
+  return make_pointer_type (type, (struct type **)0);
+}
+
+/* Lookup a C++ `reference' to a type TYPE.  TYPEPTR, if nonzero, points
+   to a pointer to memory where the reference type should be stored.
+   If *TYPEPTR is zero, update it to point to the reference type we return.
+   We allocate new memory if needed.  */
+
+struct type *
+make_reference_type (type, typeptr)
+     struct type *type;
+     struct type **typeptr;
+{
+  register struct type *ntype;		/* New type */
+  struct objfile *objfile;
+
+  ntype = TYPE_REFERENCE_TYPE (type);
+
+  if (ntype) 
+    {
+      if (typeptr == 0)		
+        return ntype;	/* Don't care about alloc, and have new type.  */
+      else if (*typeptr == 0)
+        {
+	  *typeptr = ntype;	/* Tracking alloc, and we have new type.  */
+	  return ntype;
+        }
+    }
+
+  if (typeptr == 0 || *typeptr == 0)	/* We'll need to allocate one.  */
+    {
+      ntype = alloc_type (TYPE_OBJFILE (type));
+      if (typeptr)
+	*typeptr = ntype;
+    }
+  else				/* We have storage, but need to reset it.  */
+    {
+      ntype = *typeptr;
+      objfile = TYPE_OBJFILE (ntype);
+      memset ((char *) ntype, 0, sizeof (struct type));
+      TYPE_OBJFILE (ntype) = objfile;
+    }
+
+  TYPE_TARGET_TYPE (ntype) = type;
+  TYPE_REFERENCE_TYPE (type) = ntype;
+
+  /* FIXME!  Assume the machine has only one representation for references,
+     and that it matches the (only) representation for pointers!  */
+
+  TYPE_LENGTH (ntype) = TARGET_PTR_BIT / TARGET_CHAR_BIT;
+  TYPE_CODE (ntype) = TYPE_CODE_REF;
+  
+  if (!TYPE_REFERENCE_TYPE (type))	/* Remember it, if don't have one.  */
+    TYPE_REFERENCE_TYPE (type) = ntype;
+
+  return ntype;
+}
+
+/* Same as above, but caller doesn't care about memory allocation details.  */
+
+struct type *
+lookup_reference_type (type)
+     struct type *type;
+{
+  return make_reference_type (type, (struct type **)0);
+}
+
+/* Lookup a function type that returns type TYPE.  TYPEPTR, if nonzero, points
+   to a pointer to memory where the function type should be stored.
+   If *TYPEPTR is zero, update it to point to the function type we return.
+   We allocate new memory if needed.  */
+
+struct type *
+make_function_type (type, typeptr)
+     struct type *type;
+     struct type **typeptr;
+{
+  register struct type *ntype;		/* New type */
+  struct objfile *objfile;
+
+  if (typeptr == 0 || *typeptr == 0)	/* We'll need to allocate one.  */
+    {
+      ntype = alloc_type (TYPE_OBJFILE (type));
+      if (typeptr)
+	*typeptr = ntype;
+    }
+  else				/* We have storage, but need to reset it.  */
+    {
+      ntype = *typeptr;
+      objfile = TYPE_OBJFILE (ntype);
+      memset ((char *) ntype, 0, sizeof (struct type));
+      TYPE_OBJFILE (ntype) = objfile;
+    }
+
+  TYPE_TARGET_TYPE (ntype) = type;
+
+  TYPE_LENGTH (ntype) = 1;
+  TYPE_CODE (ntype) = TYPE_CODE_FUNC;
+  
+  return ntype;
+}
+
+
+/* Given a type TYPE, return a type of functions that return that type.
+   May need to construct such a type if this is the first use.  */
+
+struct type *
+lookup_function_type (type)
+     struct type *type;
+{
+  return make_function_type (type, (struct type **)0);
+}
+
+
+/* Make a "c-v" variant of a type -- a type that is identical to the
+   one supplied except that it may have const or volatile attributes
+   CNST is a flag for setting the const attribute
+   VOLTL is a flag for setting the volatile attribute
+   TYPE is the base type whose variant we are creating.
+   TYPEPTR, if nonzero, points
+   to a pointer to memory where the reference type should be stored.
+   If *TYPEPTR is zero, update it to point to the reference type we return.
+   We allocate new memory if needed.  */
+
+struct type *
+make_cv_type (cnst, voltl, type, typeptr)
+     int cnst;
+     int voltl;
+     struct type *type;
+     struct type **typeptr;
+{
+  register struct type *ntype;		 /* New type */
+  register struct type *tmp_type = type; /* tmp type */
+  struct objfile *objfile;
+
+  ntype = TYPE_CV_TYPE (type);
+
+  while (ntype != type)
+    {
+      if ((TYPE_CONST (ntype) == cnst) &&
+          (TYPE_VOLATILE (ntype) == voltl))
+          {
+            if (typeptr == 0)
+              return ntype;
+            else if (*typeptr == 0)
+              {
+                *typeptr = ntype;	/* Tracking alloc, and we have new type.  */
+                return ntype;
+              }
+          }
+      tmp_type = ntype;
+      ntype = TYPE_CV_TYPE (ntype);
+    }
+
+  if (typeptr == 0 || *typeptr == 0)	/* We'll need to allocate one.  */
+    {
+      ntype = alloc_type (TYPE_OBJFILE (type));
+      if (typeptr)
+	*typeptr = ntype;
+    }
+  else				/* We have storage, but need to reset it.  */
+    {
+      ntype = *typeptr;
+      objfile = TYPE_OBJFILE (ntype);
+      /* memset ((char *) ntype, 0, sizeof (struct type)); */
+      TYPE_OBJFILE (ntype) = objfile;
+    }
+
+  /* Copy original type */ 
+  memcpy ((char *) ntype, (char *) type, sizeof (struct type));
+  /* But zero out fields that shouldn't be copied */
+  TYPE_POINTER_TYPE (ntype) = (struct type *) 0;    /* Need new pointer kind */
+  TYPE_REFERENCE_TYPE (ntype) = (struct type *) 0;  /* Need new referene kind */
+  /* Note: TYPE_TARGET_TYPE can be left as is */
+
+  /* Set flags appropriately */
+  if (cnst)
+    TYPE_FLAGS (ntype) |=  TYPE_FLAG_CONST;
+  else
+    TYPE_FLAGS (ntype) &=  ~TYPE_FLAG_CONST;
+
+  if (voltl)
+    TYPE_FLAGS (ntype) |=  TYPE_FLAG_VOLATILE;
+  else
+    TYPE_FLAGS (ntype) &=  ~TYPE_FLAG_VOLATILE;
+
+  /* Fix the chain of cv variants */
+  TYPE_CV_TYPE (ntype) = type;
+  TYPE_CV_TYPE (tmp_type) = ntype;
+
+  return ntype;
+}
+
+
+
+
+/* Implement direct support for MEMBER_TYPE in GNU C++.
+   May need to construct such a type if this is the first use.
+   The TYPE is the type of the member.  The DOMAIN is the type
+   of the aggregate that the member belongs to.  */
+
+struct type *
+lookup_member_type (type, domain)
+     struct type *type;
+     struct type *domain;
+{
+  register struct type *mtype;
+
+  mtype = alloc_type (TYPE_OBJFILE (type));
+  smash_to_member_type (mtype, domain, type);
+  return (mtype);
+}
+
+/* Allocate a stub method whose return type is TYPE.  
+   This apparently happens for speed of symbol reading, since parsing
+   out the arguments to the method is cpu-intensive, the way we are doing
+   it.  So, we will fill in arguments later.
+   This always returns a fresh type.   */
+
+struct type *
+allocate_stub_method (type)
+     struct type *type;
+{
+  struct type *mtype;
+
+  mtype = alloc_type (TYPE_OBJFILE (type));
+  TYPE_TARGET_TYPE (mtype) = type;
+  /*  _DOMAIN_TYPE (mtype) = unknown yet */
+  /*  _ARG_TYPES (mtype) = unknown yet */
+  TYPE_FLAGS (mtype) = TYPE_FLAG_STUB;
+  TYPE_CODE (mtype) = TYPE_CODE_METHOD;
+  TYPE_LENGTH (mtype) = 1;
+  return (mtype);
+}
+
+/* Create a range type using either a blank type supplied in RESULT_TYPE,
+   or creating a new type, inheriting the objfile from INDEX_TYPE.
+
+   Indices will be of type INDEX_TYPE, and will range from LOW_BOUND to
+   HIGH_BOUND, inclusive.
+
+   FIXME:  Maybe we should check the TYPE_CODE of RESULT_TYPE to make
+   sure it is TYPE_CODE_UNDEF before we bash it into a range type? */
+
+struct type *
+create_range_type (result_type, index_type, low_bound, high_bound)
+     struct type *result_type;
+     struct type *index_type;
+     int low_bound;
+     int high_bound;
+{
+  if (result_type == NULL)
+    {
+      result_type = alloc_type (TYPE_OBJFILE (index_type));
+    }
+  TYPE_CODE (result_type) = TYPE_CODE_RANGE;
+  TYPE_TARGET_TYPE (result_type) = index_type;
+  if (TYPE_FLAGS (index_type) & TYPE_FLAG_STUB)
+    TYPE_FLAGS (result_type) |= TYPE_FLAG_TARGET_STUB;
+  else
+    TYPE_LENGTH (result_type) = TYPE_LENGTH (check_typedef (index_type));
+  TYPE_NFIELDS (result_type) = 2;
+  TYPE_FIELDS (result_type) = (struct field *)
+    TYPE_ALLOC (result_type, 2 * sizeof (struct field));
+  memset (TYPE_FIELDS (result_type), 0, 2 * sizeof (struct field));
+  TYPE_FIELD_BITPOS (result_type, 0) = low_bound;
+  TYPE_FIELD_BITPOS (result_type, 1) = high_bound;
+  TYPE_FIELD_TYPE (result_type, 0) = builtin_type_int;		/* FIXME */
+  TYPE_FIELD_TYPE (result_type, 1) = builtin_type_int;		/* FIXME */
+
+  if(low_bound >= 0)
+    TYPE_FLAGS (result_type) |= TYPE_FLAG_UNSIGNED;
+
+  return (result_type);
+}
+
+/* Set *LOWP and *HIGHP to the lower and upper bounds of discrete type TYPE.
+   Return 1 of type is a range type, 0 if it is discrete (and bounds
+   will fit in LONGEST), or -1 otherwise. */
+
+int
+get_discrete_bounds (type, lowp, highp)
+     struct type *type;
+     LONGEST *lowp, *highp;
+{
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_RANGE:
+      *lowp = TYPE_LOW_BOUND (type);
+      *highp = TYPE_HIGH_BOUND (type);
+      return 1;
+    case TYPE_CODE_ENUM:
+      if (TYPE_NFIELDS (type) > 0)
+	{
+	  /* The enums may not be sorted by value, so search all
+	     entries */
+	  int i;
+
+	  *lowp = *highp = TYPE_FIELD_BITPOS (type, 0);
+	  for (i = 0; i < TYPE_NFIELDS (type); i++)
+	    {
+	      if (TYPE_FIELD_BITPOS (type, i) < *lowp)
+		*lowp = TYPE_FIELD_BITPOS (type, i);
+	      if (TYPE_FIELD_BITPOS (type, i) > *highp)
+		*highp = TYPE_FIELD_BITPOS (type, i);
+	    }
+
+	  /* Set unsigned indicator if warranted. */
+	  if(*lowp >= 0)
+	    {
+	      TYPE_FLAGS (type) |= TYPE_FLAG_UNSIGNED;
+	    }
+	}
+      else
+	{
+	  *lowp = 0;
+	  *highp = -1;
+	}
+      return 0;
+    case TYPE_CODE_BOOL:
+      *lowp = 0;
+      *highp = 1;
+      return 0;
+    case TYPE_CODE_INT:
+      if (TYPE_LENGTH (type) > sizeof (LONGEST))  /* Too big */
+	return -1;
+      if (!TYPE_UNSIGNED (type))
+	{
+	  *lowp = - (1 << (TYPE_LENGTH (type) * TARGET_CHAR_BIT - 1));
+	  *highp = -*lowp - 1;
+	  return 0;
+	}
+      /* ... fall through for unsigned ints ... */
+    case TYPE_CODE_CHAR:
+      *lowp = 0;
+      /* This round-about calculation is to avoid shifting by
+	 TYPE_LENGTH (type) * TARGET_CHAR_BIT, which will not work
+	 if TYPE_LENGTH (type) == sizeof (LONGEST). */
+      *highp = 1 << (TYPE_LENGTH (type) * TARGET_CHAR_BIT - 1);
+      *highp = (*highp - 1) | *highp;
+      return 0;
+    default:
+      return -1;
+    }
+}
+
+/* Create an array type using either a blank type supplied in RESULT_TYPE,
+   or creating a new type, inheriting the objfile from RANGE_TYPE.
+
+   Elements will be of type ELEMENT_TYPE, the indices will be of type
+   RANGE_TYPE.
+
+   FIXME:  Maybe we should check the TYPE_CODE of RESULT_TYPE to make
+   sure it is TYPE_CODE_UNDEF before we bash it into an array type? */
+
+struct type *
+create_array_type (result_type, element_type, range_type)
+     struct type *result_type;
+     struct type *element_type;
+     struct type *range_type;
+{
+  LONGEST low_bound, high_bound;
+
+  if (result_type == NULL)
+    {
+      result_type = alloc_type (TYPE_OBJFILE (range_type));
+    }
+  TYPE_CODE (result_type) = TYPE_CODE_ARRAY;
+  TYPE_TARGET_TYPE (result_type) = element_type;
+  if (get_discrete_bounds (range_type, &low_bound, &high_bound) < 0)
+    low_bound = high_bound = 0;
+  CHECK_TYPEDEF (element_type);
+  TYPE_LENGTH (result_type) =
+    TYPE_LENGTH (element_type) * (high_bound - low_bound + 1);
+  TYPE_NFIELDS (result_type) = 1;
+  TYPE_FIELDS (result_type) =
+    (struct field *) TYPE_ALLOC (result_type, sizeof (struct field));
+  memset (TYPE_FIELDS (result_type), 0, sizeof (struct field));
+  TYPE_FIELD_TYPE (result_type, 0) = range_type;
+  TYPE_VPTR_FIELDNO (result_type) = -1;
+
+  /* TYPE_FLAG_TARGET_STUB will take care of zero length arrays */
+  if (TYPE_LENGTH (result_type) == 0)
+    TYPE_FLAGS (result_type) |= TYPE_FLAG_TARGET_STUB;
+
+  return (result_type);
+}
+
+/* Create a string type using either a blank type supplied in RESULT_TYPE,
+   or creating a new type.  String types are similar enough to array of
+   char types that we can use create_array_type to build the basic type
+   and then bash it into a string type.
+
+   For fixed length strings, the range type contains 0 as the lower
+   bound and the length of the string minus one as the upper bound.
+
+   FIXME:  Maybe we should check the TYPE_CODE of RESULT_TYPE to make
+   sure it is TYPE_CODE_UNDEF before we bash it into a string type? */
+
+struct type *
+create_string_type (result_type, range_type)
+     struct type *result_type;
+     struct type *range_type;
+{
+  result_type = create_array_type (result_type,
+				   *current_language->string_char_type,
+				   range_type);
+  TYPE_CODE (result_type) = TYPE_CODE_STRING;
+  return (result_type);
+}
+
+struct type *
+create_set_type (result_type, domain_type)
+     struct type *result_type;
+     struct type *domain_type;
+{
+  LONGEST low_bound, high_bound, bit_length;
+  if (result_type == NULL)
+    {
+      result_type = alloc_type (TYPE_OBJFILE (domain_type));
+    }
+  TYPE_CODE (result_type) = TYPE_CODE_SET;
+  TYPE_NFIELDS (result_type) = 1;
+  TYPE_FIELDS (result_type) = (struct field *)
+    TYPE_ALLOC (result_type, 1 * sizeof (struct field));
+  memset (TYPE_FIELDS (result_type), 0, sizeof (struct field));
+
+  if (! (TYPE_FLAGS (domain_type) & TYPE_FLAG_STUB))
+    {
+      if (get_discrete_bounds (domain_type, &low_bound, &high_bound) < 0)
+	low_bound = high_bound = 0;
+      bit_length = high_bound - low_bound + 1;
+      TYPE_LENGTH (result_type)
+	= (bit_length + TARGET_CHAR_BIT - 1) / TARGET_CHAR_BIT;
+    }
+  TYPE_FIELD_TYPE (result_type, 0) = domain_type;
+
+  if(low_bound >= 0)
+    TYPE_FLAGS (result_type) |= TYPE_FLAG_UNSIGNED;
+
+  return (result_type);
+}
+
+/* Smash TYPE to be a type of members of DOMAIN with type TO_TYPE. 
+   A MEMBER is a wierd thing -- it amounts to a typed offset into
+   a struct, e.g. "an int at offset 8".  A MEMBER TYPE doesn't
+   include the offset (that's the value of the MEMBER itself), but does
+   include the structure type into which it points (for some reason).
+
+   When "smashing" the type, we preserve the objfile that the
+   old type pointed to, since we aren't changing where the type is actually
+   allocated.  */
+
+void
+smash_to_member_type (type, domain, to_type)
+     struct type *type;
+     struct type *domain;
+     struct type *to_type;
+{
+  struct objfile *objfile;
+
+  objfile = TYPE_OBJFILE (type);
+
+  memset ((char *) type, 0, sizeof (struct type));
+  TYPE_OBJFILE (type) = objfile;
+  TYPE_TARGET_TYPE (type) = to_type;
+  TYPE_DOMAIN_TYPE (type) = domain;
+  TYPE_LENGTH (type) = 1;	/* In practice, this is never needed.  */
+  TYPE_CODE (type) = TYPE_CODE_MEMBER;
+}
+
+/* Smash TYPE to be a type of method of DOMAIN with type TO_TYPE.
+   METHOD just means `function that gets an extra "this" argument'.
+
+   When "smashing" the type, we preserve the objfile that the
+   old type pointed to, since we aren't changing where the type is actually
+   allocated.  */
+
+void
+smash_to_method_type (type, domain, to_type, args)
+     struct type *type;
+     struct type *domain;
+     struct type *to_type;
+     struct type **args;
+{
+  struct objfile *objfile;
+
+  objfile = TYPE_OBJFILE (type);
+
+  memset ((char *) type, 0, sizeof (struct type));
+  TYPE_OBJFILE (type) = objfile;
+  TYPE_TARGET_TYPE (type) = to_type;
+  TYPE_DOMAIN_TYPE (type) = domain;
+  TYPE_ARG_TYPES (type) = args;
+  TYPE_LENGTH (type) = 1;	/* In practice, this is never needed.  */
+  TYPE_CODE (type) = TYPE_CODE_METHOD;
+}
+
+/* Return a typename for a struct/union/enum type without "struct ",
+   "union ", or "enum ".  If the type has a NULL name, return NULL.  */
+
+char *
+type_name_no_tag (type)
+     register const struct type *type;
+{
+  if (TYPE_TAG_NAME (type) != NULL)
+    return TYPE_TAG_NAME (type);
+
+  /* Is there code which expects this to return the name if there is no
+     tag name?  My guess is that this is mainly used for C++ in cases where
+     the two will always be the same.  */
+  return TYPE_NAME (type);
+}
+
+/* Lookup a primitive type named NAME. 
+   Return zero if NAME is not a primitive type.*/
+
+struct type *
+lookup_primitive_typename (name)
+     char *name;
+{
+   struct type ** const *p;
+
+   for (p = current_language -> la_builtin_type_vector; *p != NULL; p++)
+     {
+       if (STREQ ((**p) -> name, name))
+	 {
+	   return (**p);
+	 }
+     }
+   return (NULL); 
+}
+
+/* Lookup a typedef or primitive type named NAME,
+   visible in lexical block BLOCK.
+   If NOERR is nonzero, return zero if NAME is not suitably defined.  */
+
+struct type *
+lookup_typename (name, block, noerr)
+     char *name;
+     struct block *block;
+     int noerr;
+{
+  register struct symbol *sym;
+  register struct type *tmp;
+
+  sym = lookup_symbol (name, block, VAR_NAMESPACE, 0, (struct symtab **) NULL);
+  if (sym == NULL || SYMBOL_CLASS (sym) != LOC_TYPEDEF)
+    {
+      tmp = lookup_primitive_typename (name);
+      if (tmp)
+	{
+	  return (tmp);
+	}
+      else if (!tmp && noerr)
+	{
+	  return (NULL);
+	}
+      else
+	{
+	  error ("No type named %s.", name);
+	}
+    }
+  return (SYMBOL_TYPE (sym));
+}
+
+struct type *
+lookup_unsigned_typename (name)
+     char *name;
+{
+  char *uns = alloca (strlen (name) + 10);
+
+  strcpy (uns, "unsigned ");
+  strcpy (uns + 9, name);
+  return (lookup_typename (uns, (struct block *) NULL, 0));
+}
+
+struct type *
+lookup_signed_typename (name)
+     char *name;
+{
+  struct type *t;
+  char *uns = alloca (strlen (name) + 8);
+
+  strcpy (uns, "signed ");
+  strcpy (uns + 7, name);
+  t = lookup_typename (uns, (struct block *) NULL, 1);
+  /* If we don't find "signed FOO" just try again with plain "FOO". */
+  if (t != NULL)
+    return t;
+  return lookup_typename (name, (struct block *) NULL, 0);
+}
+
+/* Lookup a structure type named "struct NAME",
+   visible in lexical block BLOCK.  */
+
+struct type *
+lookup_struct (name, block)
+     char *name;
+     struct block *block;
+{
+  register struct symbol *sym;
+
+  sym = lookup_symbol (name, block, STRUCT_NAMESPACE, 0,
+		       (struct symtab **) NULL);
+
+  if (sym == NULL)
+    {
+      error ("No struct type named %s.", name);
+    }
+  if (TYPE_CODE (SYMBOL_TYPE (sym)) != TYPE_CODE_STRUCT)
+    {
+      error ("This context has class, union or enum %s, not a struct.", name);
+    }
+  return (SYMBOL_TYPE (sym));
+}
+
+/* Lookup a union type named "union NAME",
+   visible in lexical block BLOCK.  */
+
+struct type *
+lookup_union (name, block)
+     char *name;
+     struct block *block;
+{
+  register struct symbol *sym;
+  struct type * t;
+
+  sym = lookup_symbol (name, block, STRUCT_NAMESPACE, 0,
+		       (struct symtab **) NULL);
+
+  if (sym == NULL)
+    error ("No union type named %s.", name);
+
+  t = SYMBOL_TYPE(sym);
+
+  if (TYPE_CODE (t) == TYPE_CODE_UNION)
+    return (t);
+
+  /* C++ unions may come out with TYPE_CODE_CLASS, but we look at
+   * a further "declared_type" field to discover it is really a union.
+   */
+  if (HAVE_CPLUS_STRUCT (t)) 
+    if (TYPE_DECLARED_TYPE(t) == DECLARED_TYPE_UNION) 
+      return (t);
+
+  /* If we get here, it's not a union */
+  error ("This context has class, struct or enum %s, not a union.", name);
+}
+
+
+/* Lookup an enum type named "enum NAME",
+   visible in lexical block BLOCK.  */
+
+struct type *
+lookup_enum (name, block)
+     char *name;
+     struct block *block;
+{
+  register struct symbol *sym;
+
+  sym = lookup_symbol (name, block, STRUCT_NAMESPACE, 0, 
+		       (struct symtab **) NULL);
+  if (sym == NULL)
+    {
+      error ("No enum type named %s.", name);
+    }
+  if (TYPE_CODE (SYMBOL_TYPE (sym)) != TYPE_CODE_ENUM)
+    {
+      error ("This context has class, struct or union %s, not an enum.", name);
+    }
+  return (SYMBOL_TYPE (sym));
+}
+
+/* Lookup a template type named "template NAME<TYPE>",
+   visible in lexical block BLOCK.  */
+
+struct type *
+lookup_template_type (name, type, block)
+     char *name;
+     struct type *type;
+     struct block *block;
+{
+  struct symbol *sym;
+  char *nam = (char*) alloca(strlen(name) + strlen(type->name) + 4);
+  strcpy (nam, name);
+  strcat (nam, "<");
+  strcat (nam, type->name);
+  strcat (nam, " >");	/* FIXME, extra space still introduced in gcc? */
+
+  sym = lookup_symbol (nam, block, VAR_NAMESPACE, 0, (struct symtab **)NULL);
+
+  if (sym == NULL)
+    {
+      error ("No template type named %s.", name);
+    }
+  if (TYPE_CODE (SYMBOL_TYPE (sym)) != TYPE_CODE_STRUCT)
+    {
+      error ("This context has class, union or enum %s, not a struct.", name);
+    }
+  return (SYMBOL_TYPE (sym));
+}
+
+/* Given a type TYPE, lookup the type of the component of type named NAME.  
+
+   TYPE can be either a struct or union, or a pointer or reference to a struct or
+   union.  If it is a pointer or reference, its target type is automatically used.
+   Thus '.' and '->' are interchangable, as specified for the definitions of the
+   expression element types STRUCTOP_STRUCT and STRUCTOP_PTR.
+
+   If NOERR is nonzero, return zero if NAME is not suitably defined.
+   If NAME is the name of a baseclass type, return that type.  */
+
+struct type *
+lookup_struct_elt_type (type, name, noerr)
+     struct type *type;
+     char *name;
+    int noerr;
+{
+  int i;
+
+  for (;;)
+    {
+      CHECK_TYPEDEF (type);
+      if (TYPE_CODE (type) != TYPE_CODE_PTR
+	  && TYPE_CODE (type) != TYPE_CODE_REF)
+	break;
+      type = TYPE_TARGET_TYPE (type);
+    }
+
+  if (TYPE_CODE (type) != TYPE_CODE_STRUCT &&
+      TYPE_CODE (type) != TYPE_CODE_UNION)
+    {
+      target_terminal_ours ();
+      gdb_flush (gdb_stdout);
+      fprintf_unfiltered (gdb_stderr, "Type ");
+      type_print (type, "", gdb_stderr, -1);
+      error (" is not a structure or union type.");
+    }
+
+#if 0
+  /* FIXME:  This change put in by Michael seems incorrect for the case where
+     the structure tag name is the same as the member name.  I.E. when doing
+     "ptype bell->bar" for "struct foo { int bar; int foo; } bell;"
+     Disabled by fnf. */
+  {
+    char *typename;
+
+    typename = type_name_no_tag (type);
+    if (typename != NULL && STREQ (typename, name))
+      return type;
+  }
+#endif
+
+  for (i = TYPE_NFIELDS (type) - 1; i >= TYPE_N_BASECLASSES (type); i--)
+    {
+      char *t_field_name = TYPE_FIELD_NAME (type, i);
+
+      if (t_field_name && STREQ (t_field_name, name))
+	{
+	  return TYPE_FIELD_TYPE (type, i);
+	}
+    }
+
+  /* OK, it's not in this class.  Recursively check the baseclasses.  */
+  for (i = TYPE_N_BASECLASSES (type) - 1; i >= 0; i--)
+    {
+      struct type *t;
+
+      t = lookup_struct_elt_type (TYPE_BASECLASS (type, i), name, noerr);
+      if (t != NULL)
+	{
+	  return t;
+	}
+    }
+
+  if (noerr)
+    {
+      return NULL;
+    }
+  
+  target_terminal_ours ();
+  gdb_flush (gdb_stdout);
+  fprintf_unfiltered (gdb_stderr, "Type ");
+  type_print (type, "", gdb_stderr, -1);
+  fprintf_unfiltered (gdb_stderr, " has no component named ");
+  fputs_filtered (name, gdb_stderr);
+  error (".");
+  return (struct type *)-1;	/* For lint */
+}
+
+/* If possible, make the vptr_fieldno and vptr_basetype fields of TYPE
+   valid.  Callers should be aware that in some cases (for example,
+   the type or one of its baseclasses is a stub type and we are
+   debugging a .o file), this function will not be able to find the virtual
+   function table pointer, and vptr_fieldno will remain -1 and vptr_basetype
+   will remain NULL.  */
+
+void
+fill_in_vptr_fieldno (type)
+     struct type *type;
+{
+  CHECK_TYPEDEF (type);
+
+  if (TYPE_VPTR_FIELDNO (type) < 0)
+    {
+      int i;
+
+      /* We must start at zero in case the first (and only) baseclass is
+	 virtual (and hence we cannot share the table pointer).  */
+      for (i = 0; i < TYPE_N_BASECLASSES (type); i++)
+	{
+	  fill_in_vptr_fieldno (TYPE_BASECLASS (type, i));
+	  if (TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i)) >= 0)
+	    {
+	      TYPE_VPTR_FIELDNO (type)
+		= TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i));
+	      TYPE_VPTR_BASETYPE (type)
+		= TYPE_VPTR_BASETYPE (TYPE_BASECLASS (type, i));
+	      break;
+	    }
+	}
+    }
+}
+
+/* Find the method and field indices for the destructor in class type T.
+   Return 1 if the destructor was found, otherwise, return 0.  */
+
+int
+get_destructor_fn_field (t, method_indexp, field_indexp)
+     struct type *t;
+     int *method_indexp;
+     int *field_indexp;
+{
+  int i;
+
+  for (i = 0; i < TYPE_NFN_FIELDS (t); i++)
+    {
+      int j;
+      struct fn_field *f = TYPE_FN_FIELDLIST1 (t, i);
+
+      for (j = 0; j < TYPE_FN_FIELDLIST_LENGTH (t, i); j++)
+	{
+	  if (DESTRUCTOR_PREFIX_P (TYPE_FN_FIELD_PHYSNAME (f, j)))
+	    {
+	      *method_indexp = i;
+	      *field_indexp = j;
+	      return 1;
+	    }
+	}
+    }
+  return 0;
+}
+
+/* Added by Bryan Boreham, Kewill, Sun Sep 17 18:07:17 1989.
+
+   If this is a stubbed struct (i.e. declared as struct foo *), see if
+   we can find a full definition in some other file. If so, copy this
+   definition, so we can use it in future.  There used to be a comment (but
+   not any code) that if we don't find a full definition, we'd set a flag
+   so we don't spend time in the future checking the same type.  That would
+   be a mistake, though--we might load in more symbols which contain a
+   full definition for the type.
+
+   This used to be coded as a macro, but I don't think it is called 
+   often enough to merit such treatment.  */
+
+struct complaint stub_noname_complaint =
+  {"stub type has NULL name", 0, 0};
+
+struct type *
+check_typedef (type)
+     register struct type *type;
+{
+  struct type *orig_type = type;
+  while (TYPE_CODE (type) == TYPE_CODE_TYPEDEF)
+    {
+      if (!TYPE_TARGET_TYPE (type))
+	{
+	  char* name;
+	  struct symbol *sym;
+
+	  /* It is dangerous to call lookup_symbol if we are currently
+	     reading a symtab.  Infinite recursion is one danger. */
+	  if (currently_reading_symtab)
+	    return type;
+
+	  name = type_name_no_tag (type);
+	  /* FIXME: shouldn't we separately check the TYPE_NAME and the
+	     TYPE_TAG_NAME, and look in STRUCT_NAMESPACE and/or VAR_NAMESPACE
+	     as appropriate?  (this code was written before TYPE_NAME and
+	     TYPE_TAG_NAME were separate).  */
+	  if (name == NULL)
+	    {
+	      complain (&stub_noname_complaint);
+	      return type;
+	    }
+	  sym = lookup_symbol (name, 0, STRUCT_NAMESPACE, 0, 
+			       (struct symtab **) NULL);
+	  if (sym)
+	    TYPE_TARGET_TYPE (type) = SYMBOL_TYPE (sym);
+	  else
+	    TYPE_TARGET_TYPE (type) = alloc_type (NULL);  /* TYPE_CODE_UNDEF */
+	}
+      type = TYPE_TARGET_TYPE (type);
+    }
+
+  /* If this is a struct/class/union with no fields, then check whether a
+     full definition exists somewhere else.  This is for systems where a
+     type definition with no fields is issued for such types, instead of
+     identifying them as stub types in the first place */ 
+     
+  if (TYPE_IS_OPAQUE (type) && opaque_type_resolution && !currently_reading_symtab)
+    {
+      char * name = type_name_no_tag (type);
+      struct type * newtype;
+      if (name == NULL)
+	{
+	  complain (&stub_noname_complaint);
+	  return type;
+	}
+      newtype = lookup_transparent_type (name);
+      if (newtype)
+	{
+	  memcpy ((char *) type, (char *) newtype, sizeof (struct type));
+	}
+    }
+  /* Otherwise, rely on the stub flag being set for opaque/stubbed types */
+  else if ((TYPE_FLAGS(type) & TYPE_FLAG_STUB) && ! currently_reading_symtab)
+    {
+      char* name = type_name_no_tag (type);
+      /* FIXME: shouldn't we separately check the TYPE_NAME and the
+	 TYPE_TAG_NAME, and look in STRUCT_NAMESPACE and/or VAR_NAMESPACE
+	 as appropriate?  (this code was written before TYPE_NAME and
+	 TYPE_TAG_NAME were separate).  */
+      struct symbol *sym;
+      if (name == NULL)
+	{
+	  complain (&stub_noname_complaint);
+	  return type;
+	}
+      sym = lookup_symbol (name, 0, STRUCT_NAMESPACE, 0, (struct symtab **) NULL);
+      if (sym)
+	{
+	  memcpy ((char *)type, (char *)SYMBOL_TYPE(sym), sizeof (struct type));
+	}
+    }
+
+  if (TYPE_FLAGS (type) & TYPE_FLAG_TARGET_STUB)
+    {
+      struct type *range_type;
+      struct type *target_type = check_typedef (TYPE_TARGET_TYPE (type));
+
+      if (TYPE_FLAGS (target_type) & (TYPE_FLAG_STUB | TYPE_FLAG_TARGET_STUB))
+	{ }
+      else if (TYPE_CODE (type) == TYPE_CODE_ARRAY
+	       && TYPE_NFIELDS (type) == 1
+	       && (TYPE_CODE (range_type = TYPE_FIELD_TYPE (type, 0))
+		   == TYPE_CODE_RANGE))
+	{
+	  /* Now recompute the length of the array type, based on its
+	     number of elements and the target type's length.  */
+	  TYPE_LENGTH (type) =
+	    ((TYPE_FIELD_BITPOS (range_type, 1)
+	      - TYPE_FIELD_BITPOS (range_type, 0)
+	      + 1)
+	     * TYPE_LENGTH (target_type));
+	  TYPE_FLAGS (type) &= ~TYPE_FLAG_TARGET_STUB;
+	}
+      else if (TYPE_CODE (type) == TYPE_CODE_RANGE)
+	{
+	  TYPE_LENGTH (type) = TYPE_LENGTH (target_type);
+	  TYPE_FLAGS (type) &= ~TYPE_FLAG_TARGET_STUB;
+	}
+    }
+  /* Cache TYPE_LENGTH for future use. */
+  TYPE_LENGTH (orig_type) = TYPE_LENGTH (type);
+  return type;
+}
+
+/* New code added to support parsing of Cfront stabs strings */
+#include <ctype.h>
+#define INIT_EXTRA { pextras->len=0; pextras->str[0]='\0'; }
+#define ADD_EXTRA(c) { pextras->str[pextras->len++]=c; }
+
+static void 
+add_name(pextras,n) 
+  struct extra * pextras;
+  char * n; 
+{
+  int nlen;
+
+  if ((nlen = (n ? strlen(n) : 0))==0) 
+    return;
+  sprintf(pextras->str+pextras->len,"%d%s",nlen,n);
+  pextras->len=strlen(pextras->str);
+}
+
+static void 
+add_mangled_type(pextras,t) 
+  struct extra * pextras;
+  struct type * t;
+{
+  enum type_code tcode;
+  int tlen, tflags;
+  char * tname;
+
+  tcode = TYPE_CODE(t);
+  tlen = TYPE_LENGTH(t);
+  tflags = TYPE_FLAGS(t);
+  tname = TYPE_NAME(t);
+  /* args of "..." seem to get mangled as "e" */
+
+  switch (tcode) 
+    {
+      case TYPE_CODE_INT: 
+        if (tflags==1)
+          ADD_EXTRA('U');
+        switch (tlen) 
+          {
+            case 1:
+              ADD_EXTRA('c');
+              break;
+            case 2:
+              ADD_EXTRA('s');
+              break;
+            case 4: 
+              {
+              char* pname;
+              if ((pname=strrchr(tname,'l'),pname) && !strcmp(pname,"long"))
+                ADD_EXTRA('l')
+              else
+                ADD_EXTRA('i')
+              }
+              break;
+            default: 
+              {
+          
+                static struct complaint msg = {"Bad int type code length x%x\n",0,0};
+          
+                complain (&msg, tlen);
+          
+              }
+          }
+        break;
+      case TYPE_CODE_FLT: 
+          switch (tlen) 
+            {
+              case 4:
+                ADD_EXTRA('f');
+                break;
+              case 8:
+                ADD_EXTRA('d');
+                break;
+              case 16:
+                ADD_EXTRA('r');
+                break;
+              default: 
+	 	{
+                  static struct complaint msg = {"Bad float type code length x%x\n",0,0};
+          	  complain (&msg, tlen);
+            	}
+      	      }
+            break;
+      case TYPE_CODE_REF:
+        ADD_EXTRA('R');
+        /* followed by what it's a ref to */
+        break;
+      case TYPE_CODE_PTR:
+        ADD_EXTRA('P');
+        /* followed by what it's a ptr to */
+        break;
+      case TYPE_CODE_TYPEDEF: 
+        {
+          static struct complaint msg = {"Typedefs in overloaded functions not yet supported\n",0,0};
+          complain (&msg);
+        }
+      /* followed by type bytes & name */
+      break;
+    case TYPE_CODE_FUNC:
+      ADD_EXTRA('F');
+      /* followed by func's arg '_' & ret types */
+      break;
+    case TYPE_CODE_VOID:
+      ADD_EXTRA('v');
+      break;
+    case TYPE_CODE_METHOD:
+      ADD_EXTRA('M');
+      /* followed by name of class and func's arg '_' & ret types */
+      add_name(pextras,tname);
+      ADD_EXTRA('F');  /* then mangle function */
+      break;
+    case TYPE_CODE_STRUCT: /* C struct */
+    case TYPE_CODE_UNION:  /* C union */
+    case TYPE_CODE_ENUM:   /* Enumeration type */
+      /* followed by name of type */
+      add_name(pextras,tname);
+      break;
+
+    /* errors possible types/not supported */
+    case TYPE_CODE_CHAR:              
+    case TYPE_CODE_ARRAY:  /* Array type */
+    case TYPE_CODE_MEMBER: /* Member type */
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_COMPLEX:            /* Complex float */
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_SET:                /* Pascal sets */
+    case TYPE_CODE_RANGE:  
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_ERROR:
+    default: 
+      {
+        static struct complaint msg = {"Unknown type code x%x\n",0,0};
+        complain (&msg, tcode);
+      }
+    }
+  if (t->target_type)
+    add_mangled_type(pextras,t->target_type);
+}
+
+#if 0
+void
+cfront_mangle_name(type, i, j)
+     struct type *type;
+     int i;
+     int j;
+{
+   struct fn_field *f;
+   char *mangled_name = gdb_mangle_name (type, i, j);
+
+   f = TYPE_FN_FIELDLIST1 (type, i);	/* moved from below */
+
+   /* kludge to support cfront methods - gdb expects to find "F" for 
+      ARM_mangled names, so when we mangle, we have to add it here */
+   if (ARM_DEMANGLING) 
+     {
+	int k;
+	char * arm_mangled_name;
+	struct fn_field *method = &f[j];
+	char *field_name = TYPE_FN_FIELDLIST_NAME (type, i);
+        char *physname = TYPE_FN_FIELD_PHYSNAME (f, j);
+        char *newname = type_name_no_tag (type);
+
+        struct type *ftype = TYPE_FN_FIELD_TYPE (f, j);
+	int nargs = TYPE_NFIELDS(ftype);	/* number of args */
+	struct extra extras, * pextras = &extras;	
+	INIT_EXTRA
+
+	if (TYPE_FN_FIELD_STATIC_P (f, j))	/* j for sublist within this list */
+	  ADD_EXTRA('S')
+	ADD_EXTRA('F')
+	/* add args here! */
+	if (nargs <= 1)				/* no args besides this */
+		ADD_EXTRA('v')
+	else {
+	  for (k=1; k<nargs; k++) 
+	    {
+	      struct type * t;
+	      t = TYPE_FIELD_TYPE(ftype,k);
+	      add_mangled_type(pextras,t);
+	    }
+	}
+	ADD_EXTRA('\0')
+	printf("add_mangled_type: %s\n",extras.str); /* FIXME */
+	arm_mangled_name = malloc(strlen(mangled_name)+extras.len);
+        sprintf(arm_mangled_name,"%s%s",mangled_name,extras.str);
+	free(mangled_name);
+	mangled_name = arm_mangled_name;
+     }
+}
+#endif	/* 0 */
+
+#undef ADD_EXTRA
+/* End of new code added to support parsing of Cfront stabs strings */
+
+/* Ugly hack to convert method stubs into method types.
+
+   He ain't kiddin'.  This demangles the name of the method into a string
+   including argument types, parses out each argument type, generates
+   a string casting a zero to that type, evaluates the string, and stuffs
+   the resulting type into an argtype vector!!!  Then it knows the type
+   of the whole function (including argument types for overloading),
+   which info used to be in the stab's but was removed to hack back
+   the space required for them.  */
+
+void
+check_stub_method (type, method_id, signature_id)
+     struct type *type;
+     int method_id;
+     int signature_id;
+{
+  struct fn_field *f;
+  char *mangled_name = gdb_mangle_name (type, method_id, signature_id);
+  char *demangled_name = cplus_demangle (mangled_name,
+					 DMGL_PARAMS | DMGL_ANSI);
+  char *argtypetext, *p;
+  int depth = 0, argcount = 1;
+  struct type **argtypes;
+  struct type *mtype;
+
+  /* Make sure we got back a function string that we can use.  */
+  if (demangled_name)
+    p = strchr (demangled_name, '(');
+
+  if (demangled_name == NULL || p == NULL)
+    error ("Internal: Cannot demangle mangled name `%s'.", mangled_name);
+
+  /* Now, read in the parameters that define this type.  */
+  p += 1;
+  argtypetext = p;
+  while (*p)
+    {
+      if (*p == '(')
+	{
+	  depth += 1;
+	}
+      else if (*p == ')')
+	{
+	  depth -= 1;
+	}
+      else if (*p == ',' && depth == 0)
+	{
+	  argcount += 1;
+	}
+
+      p += 1;
+    }
+
+  /* We need two more slots: one for the THIS pointer, and one for the
+     NULL [...] or void [end of arglist].  */
+
+  argtypes = (struct type **)
+    TYPE_ALLOC (type, (argcount + 2) * sizeof (struct type *));
+  p = argtypetext;
+  /* FIXME: This is wrong for static member functions.  */
+  argtypes[0] = lookup_pointer_type (type);
+  argcount = 1;
+
+  if (*p != ')')			/* () means no args, skip while */
+    {
+      depth = 0;
+      while (*p)
+	{
+	  if (depth <= 0 && (*p == ',' || *p == ')'))
+	    {
+	      /* Avoid parsing of ellipsis, they will be handled below.  */
+	      if (strncmp (argtypetext, "...", p - argtypetext) != 0)
+		{
+		  argtypes[argcount] =
+		      parse_and_eval_type (argtypetext, p - argtypetext);
+		  argcount += 1;
+		}
+	      argtypetext = p + 1;
+	    }
+
+	  if (*p == '(')
+	    {
+	      depth += 1;
+	    }
+	  else if (*p == ')')
+	    {
+	      depth -= 1;
+	    }
+
+	  p += 1;
+	}
+    }
+
+  if (p[-2] != '.')			/* Not '...' */
+    {
+      argtypes[argcount] = builtin_type_void;	/* List terminator */
+    }
+  else
+    {
+      argtypes[argcount] = NULL;		/* Ellist terminator */
+    }
+
+  free (demangled_name);
+
+  f = TYPE_FN_FIELDLIST1 (type, method_id);	
+
+  TYPE_FN_FIELD_PHYSNAME (f, signature_id) = mangled_name;
+
+  /* Now update the old "stub" type into a real type.  */
+  mtype = TYPE_FN_FIELD_TYPE (f, signature_id);
+  TYPE_DOMAIN_TYPE (mtype) = type;
+  TYPE_ARG_TYPES (mtype) = argtypes;
+  TYPE_FLAGS (mtype) &= ~TYPE_FLAG_STUB;
+  TYPE_FN_FIELD_STUB (f, signature_id) = 0;
+}
+
+const struct cplus_struct_type cplus_struct_default;
+
+void
+allocate_cplus_struct_type (type)
+     struct type *type;
+{
+  if (!HAVE_CPLUS_STRUCT (type))
+    {
+      TYPE_CPLUS_SPECIFIC (type) = (struct cplus_struct_type *)
+	TYPE_ALLOC (type, sizeof (struct cplus_struct_type));
+      *(TYPE_CPLUS_SPECIFIC(type)) = cplus_struct_default;
+    }
+}
+
+/* Helper function to initialize the standard scalar types.
+
+   If NAME is non-NULL and OBJFILE is non-NULL, then we make a copy
+   of the string pointed to by name in the type_obstack for that objfile,
+   and initialize the type name to that copy.  There are places (mipsread.c
+   in particular, where init_type is called with a NULL value for NAME). */
+
+struct type *
+init_type (code, length, flags, name, objfile)
+     enum type_code code;
+     int length;
+     int flags;
+     char *name;
+     struct objfile *objfile;
+{
+  register struct type *type;
+
+  type = alloc_type (objfile);
+  TYPE_CODE (type) = code;
+  TYPE_LENGTH (type) = length;
+  TYPE_FLAGS (type) |= flags;
+  if ((name != NULL) && (objfile != NULL))
+    {
+      TYPE_NAME (type) =
+	obsavestring (name, strlen (name), &objfile -> type_obstack);
+    }
+  else
+    {
+      TYPE_NAME (type) = name;
+    }
+
+  /* C++ fancies.  */
+
+  if (code == TYPE_CODE_STRUCT || code == TYPE_CODE_UNION)
+    {
+      INIT_CPLUS_SPECIFIC (type);
+    }
+  return (type);
+}
+
+/* Look up a fundamental type for the specified objfile.
+   May need to construct such a type if this is the first use.
+
+   Some object file formats (ELF, COFF, etc) do not define fundamental
+   types such as "int" or "double".  Others (stabs for example), do
+   define fundamental types.
+
+   For the formats which don't provide fundamental types, gdb can create
+   such types, using defaults reasonable for the current language and
+   the current target machine.
+
+   NOTE:  This routine is obsolescent.  Each debugging format reader
+   should manage it's own fundamental types, either creating them from
+   suitable defaults or reading them from the debugging information,
+   whichever is appropriate.  The DWARF reader has already been
+   fixed to do this.  Once the other readers are fixed, this routine
+   will go away.  Also note that fundamental types should be managed
+   on a compilation unit basis in a multi-language environment, not
+   on a linkage unit basis as is done here. */
+
+
+struct type *
+lookup_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  register struct type **typep;
+  register int nbytes;
+
+  if (typeid < 0 || typeid >= FT_NUM_MEMBERS)
+    {
+      error ("internal error - invalid fundamental type id %d", typeid);
+    }
+
+  /* If this is the first time we need a fundamental type for this objfile
+     then we need to initialize the vector of type pointers. */
+  
+  if (objfile -> fundamental_types == NULL)
+    {
+      nbytes = FT_NUM_MEMBERS * sizeof (struct type *);
+      objfile -> fundamental_types = (struct type **)
+	obstack_alloc (&objfile -> type_obstack, nbytes);
+      memset ((char *) objfile -> fundamental_types, 0, nbytes);
+      OBJSTAT (objfile, n_types += FT_NUM_MEMBERS);
+    }
+
+  /* Look for this particular type in the fundamental type vector.  If one is
+     not found, create and install one appropriate for the current language. */
+
+  typep = objfile -> fundamental_types + typeid;
+  if (*typep == NULL)
+    {
+      *typep = create_fundamental_type (objfile, typeid);
+    }
+
+  return (*typep);
+}
+
+int
+can_dereference (t)
+     struct type *t;
+{
+  /* FIXME: Should we return true for references as well as pointers?  */
+  CHECK_TYPEDEF (t);
+  return
+    (t != NULL
+     && TYPE_CODE (t) == TYPE_CODE_PTR
+     && TYPE_CODE (TYPE_TARGET_TYPE (t)) != TYPE_CODE_VOID);
+}
+
+/* Chill varying string and arrays are represented as follows:
+
+   struct { int __var_length; ELEMENT_TYPE[MAX_SIZE] __var_data};
+
+   Return true if TYPE is such a Chill varying type. */
+
+int
+chill_varying_type (type)
+     struct type *type;
+{
+  if (TYPE_CODE (type) != TYPE_CODE_STRUCT
+      || TYPE_NFIELDS (type) != 2
+      || strcmp (TYPE_FIELD_NAME (type, 0), "__var_length") != 0)
+    return 0;
+  return 1;
+}
+
+/* Check whether BASE is an ancestor or base class or DCLASS 
+   Return 1 if so, and 0 if not.
+   Note: callers may want to check for identity of the types before
+   calling this function -- identical types are considered to satisfy
+   the ancestor relationship even if they're identical */
+
+int
+is_ancestor (base, dclass)
+  struct type * base;
+  struct type * dclass;
+{
+  int i;
+  
+  CHECK_TYPEDEF (base);
+  CHECK_TYPEDEF (dclass);
+
+  if (base == dclass)
+    return 1;
+
+  for (i = 0; i < TYPE_N_BASECLASSES (dclass); i++)
+    if (is_ancestor (base, TYPE_BASECLASS (dclass, i)))
+      return 1;
+
+  return 0;
+}
+
+
+
+/* See whether DCLASS has a virtual table.  This routine is aimed at
+   the HP/Taligent ANSI C++ runtime model, and may not work with other
+   runtime models.  Return 1 => Yes, 0 => No.  */
+
+int
+has_vtable (dclass)
+  struct type * dclass;
+{
+  /* In the HP ANSI C++ runtime model, a class has a vtable only if it
+     has virtual functions or virtual bases.  */
+
+  register int i;
+
+  if (TYPE_CODE(dclass) != TYPE_CODE_CLASS)
+    return 0;
+  
+  /* First check for the presence of virtual bases */
+  if (TYPE_FIELD_VIRTUAL_BITS(dclass))
+    for (i=0; i < TYPE_N_BASECLASSES(dclass); i++)
+      if (B_TST(TYPE_FIELD_VIRTUAL_BITS(dclass), i))
+        return 1;
+  
+  /* Next check for virtual functions */
+  if (TYPE_FN_FIELDLISTS(dclass))
+    for (i=0; i < TYPE_NFN_FIELDS(dclass); i++)
+      if (TYPE_FN_FIELD_VIRTUAL_P(TYPE_FN_FIELDLIST1(dclass, i), 0))
+        return 1;
+
+  /* Recurse on non-virtual bases to see if any of them needs a vtable */ 
+  if (TYPE_FIELD_VIRTUAL_BITS(dclass))
+    for (i=0; i < TYPE_N_BASECLASSES(dclass); i++)
+      if ((!B_TST (TYPE_FIELD_VIRTUAL_BITS(dclass), i)) &&
+	  (has_vtable (TYPE_FIELD_TYPE(dclass, i))))
+	return 1;
+  
+  /* Well, maybe we don't need a virtual table */ 
+  return 0;
+}
+
+/* Return a pointer to the "primary base class" of DCLASS.
+ 
+   A NULL return indicates that DCLASS has no primary base, or that it
+   couldn't be found (insufficient information).
+  
+   This routine is aimed at the HP/Taligent ANSI C++ runtime model,
+   and may not work with other runtime models.  */
+
+struct type *
+primary_base_class (dclass)
+  struct type * dclass;
+{
+  /* In HP ANSI C++'s runtime model, a "primary base class" of a class
+     is the first directly inherited, non-virtual base class that
+     requires a virtual table */
+
+  register int i;
+
+  if (TYPE_CODE(dclass) != TYPE_CODE_CLASS)
+    return NULL;
+
+  for (i=0; i < TYPE_N_BASECLASSES(dclass); i++)
+    if (!TYPE_FIELD_VIRTUAL(dclass, i) &&
+        has_vtable(TYPE_FIELD_TYPE(dclass, i)))
+      return TYPE_FIELD_TYPE(dclass, i);
+
+  return NULL;
+}
+
+/* Global manipulated by virtual_base_list[_aux]() */
+
+static struct vbase * current_vbase_list = NULL;
+
+/* Return a pointer to a null-terminated list of struct vbase
+   items. The vbasetype pointer of each item in the list points to the
+   type information for a virtual base of the argument DCLASS.
+  
+   Helper function for virtual_base_list(). 
+   Note: the list goes backward, right-to-left. virtual_base_list()
+   copies the items out in reverse order.  */
+
+struct vbase *
+virtual_base_list_aux (dclass)
+  struct type * dclass;
+{
+  struct vbase * tmp_vbase;
+  register int i;
+
+  if (TYPE_CODE(dclass) != TYPE_CODE_CLASS)
+    return NULL;
+
+  for (i = 0; i < TYPE_N_BASECLASSES (dclass); i++)
+    {
+      /* Recurse on this ancestor, first */
+      virtual_base_list_aux(TYPE_FIELD_TYPE(dclass, i));
+
+      /* If this current base is itself virtual, add it to the list */
+      if (BASETYPE_VIA_VIRTUAL(dclass, i))
+        {
+          struct type * basetype = TYPE_FIELD_TYPE (dclass, i);
+          
+          /* Check if base already recorded */
+          tmp_vbase = current_vbase_list;
+          while (tmp_vbase)
+            {
+              if (tmp_vbase->vbasetype == basetype)
+                break; /* found it */
+              tmp_vbase = tmp_vbase->next;
+            }
+
+          if (!tmp_vbase) /* normal exit from loop */
+            {
+              /* Allocate new item for this virtual base */
+              tmp_vbase = (struct vbase *) xmalloc (sizeof (struct vbase));
+
+              /* Stick it on at the end of the list */
+              tmp_vbase->vbasetype = basetype;
+              tmp_vbase->next = current_vbase_list;
+              current_vbase_list = tmp_vbase;
+            }
+        } /* if virtual */
+    } /* for loop over bases */
+}
+
+
+/* Compute the list of virtual bases in the right order.  Virtual
+   bases are laid out in the object's memory area in order of their
+   occurrence in a depth-first, left-to-right search through the
+   ancestors.
+  
+   Argument DCLASS is the type whose virtual bases are required.
+   Return value is the address of a null-terminated array of pointers
+   to struct type items.
+   
+   This routine is aimed at the HP/Taligent ANSI C++ runtime model,
+   and may not work with other runtime models.
+  
+   This routine merely hands off the argument to virtual_base_list_aux()
+   and then copies the result into an array to save space.  */
+
+struct type **
+virtual_base_list (dclass)
+  struct type * dclass;
+{
+  register struct vbase * tmp_vbase;
+  register struct vbase * tmp_vbase_2;
+  register int i;
+  int count;
+  struct type ** vbase_array;
+
+  current_vbase_list = NULL;
+  virtual_base_list_aux(dclass);
+
+  for (i=0, tmp_vbase = current_vbase_list; tmp_vbase != NULL; i++, tmp_vbase = tmp_vbase->next)
+    /* no body */ ;
+
+  count = i;
+
+  vbase_array = (struct type **) xmalloc((count + 1) * sizeof (struct type *));
+
+  for (i=count -1, tmp_vbase = current_vbase_list; i >= 0; i--, tmp_vbase = tmp_vbase->next)
+    vbase_array[i] = tmp_vbase->vbasetype;
+
+  /* Get rid of constructed chain */
+  tmp_vbase_2 = tmp_vbase = current_vbase_list;
+  while (tmp_vbase)
+    {
+      tmp_vbase = tmp_vbase->next;
+      free(tmp_vbase_2);
+      tmp_vbase_2 = tmp_vbase;
+    }
+  
+  vbase_array[count] = NULL;
+  return vbase_array;
+}
+
+/* Return the length of the virtual base list of the type DCLASS.  */
+
+int
+virtual_base_list_length (dclass)
+  struct type * dclass;
+{
+  register int i;
+  register struct vbase * tmp_vbase;
+  
+  current_vbase_list = NULL;
+  virtual_base_list_aux(dclass);
+
+  for (i=0, tmp_vbase = current_vbase_list; tmp_vbase != NULL; i++, tmp_vbase = tmp_vbase->next)
+    /* no body */ ;
+  return i;
+}
+
+/* Return the number of elements of the virtual base list of the type
+   DCLASS, ignoring those appearing in the primary base (and its
+   primary base, recursively).  */
+
+int
+virtual_base_list_length_skip_primaries (dclass)
+  struct type * dclass;
+{
+  register int i;
+  register struct vbase * tmp_vbase;
+  struct type * primary;
+
+  primary = TYPE_RUNTIME_PTR (dclass) ? TYPE_PRIMARY_BASE (dclass) : NULL;
+
+  if (!primary)
+    return virtual_base_list_length (dclass);
+
+  current_vbase_list = NULL;
+  virtual_base_list_aux(dclass);
+
+  for (i=0, tmp_vbase = current_vbase_list; tmp_vbase != NULL; tmp_vbase = tmp_vbase->next)
+    {
+      if (virtual_base_index (tmp_vbase->vbasetype, primary) >= 0)
+        continue;
+      i++;
+    }
+  return i;
+}
+
+
+/* Return the index (position) of type BASE, which is a virtual base
+   class of DCLASS, in the latter's virtual base list.  A return of -1
+   indicates "not found" or a problem.  */
+
+int
+virtual_base_index(base, dclass)
+  struct type * base;
+  struct type * dclass;
+{
+  register struct type * vbase;
+  register int i;
+
+  if ((TYPE_CODE(dclass) != TYPE_CODE_CLASS) ||
+      (TYPE_CODE(base) != TYPE_CODE_CLASS))
+    return -1;
+
+  i = 0;
+  vbase = TYPE_VIRTUAL_BASE_LIST(dclass)[0];
+  while (vbase)
+    {
+      if (vbase == base)
+        break;
+      vbase = TYPE_VIRTUAL_BASE_LIST(dclass)[++i];
+    }
+
+  return vbase ? i : -1;
+}
+
+
+
+/* Return the index (position) of type BASE, which is a virtual base
+   class of DCLASS, in the latter's virtual base list. Skip over all
+   bases that may appear in the virtual base list of the primary base
+   class of DCLASS (recursively).  A return of -1 indicates "not
+   found" or a problem.  */
+
+int
+virtual_base_index_skip_primaries(base, dclass)
+  struct type * base;
+  struct type * dclass;
+{
+  register struct type * vbase;
+  register int i, j;
+  struct type * primary;
+
+  if ((TYPE_CODE(dclass) != TYPE_CODE_CLASS) ||
+      (TYPE_CODE(base) != TYPE_CODE_CLASS))
+    return -1;
+
+  primary = TYPE_RUNTIME_PTR(dclass) ? TYPE_PRIMARY_BASE(dclass) : NULL;
+
+  j = -1;
+  i = 0;
+  vbase = TYPE_VIRTUAL_BASE_LIST(dclass)[0];
+  while (vbase)
+    {
+      if (!primary || (virtual_base_index_skip_primaries(vbase, primary) < 0))
+        j++;
+      if (vbase == base)
+        break;
+      vbase = TYPE_VIRTUAL_BASE_LIST(dclass)[++i];
+    }
+
+  return vbase ? j : -1;
+}
+
+/* Return position of a derived class DCLASS in the list of
+ * primary bases starting with the remotest ancestor.
+ * Position returned is 0-based. */
+
+int
+class_index_in_primary_list (dclass)
+  struct type * dclass;
+{
+  struct type * pbc; /* primary base class */
+
+  /* Simply recurse on primary base */ 
+  pbc = TYPE_PRIMARY_BASE (dclass);
+  if (pbc)
+    return 1 + class_index_in_primary_list (pbc);
+  else
+    return 0;
+}
+
+/* Return a count of the number of virtual functions a type has.
+ * This includes all the virtual functions it inherits from its
+ * base classes too.
+ */
+
+/* pai: FIXME This doesn't do the right thing: count redefined virtual
+ * functions only once (latest redefinition)
+ */
+
+int
+count_virtual_fns (dclass)
+  struct type * dclass;
+{
+  int base;     /* index for base classes */
+  int fn, oi;   /* function and overloaded instance indices */
+  
+  int vfuncs;   /* count to return */ 
+
+  /* recurse on bases that can share virtual table */ 
+  struct type * pbc = primary_base_class (dclass);
+  if (pbc)
+    vfuncs = count_virtual_fns (pbc);
+  
+  for (fn = 0; fn < TYPE_NFN_FIELDS (dclass); fn++)
+    for (oi = 0; oi < TYPE_FN_FIELDLIST_LENGTH (dclass, fn); oi++)
+      if (TYPE_FN_FIELD_VIRTUAL_P (TYPE_FN_FIELDLIST1 (dclass, fn), oi))
+        vfuncs++;
+
+  return vfuncs;
+}
+
+
+
+/* Functions for overload resolution begin here */
+
+/* Compare two badness vectors A and B and return the result.
+ * 0 => A and B are identical
+ * 1 => A and B are incomparable
+ * 2 => A is better than B
+ * 3 => A is worse than B */
+
+int
+compare_badness (a, b)
+  struct badness_vector * a;
+  struct badness_vector * b;
+{
+  int i;
+  int tmp;
+  short found_pos = 0;      /* any positives in c? */
+  short found_neg = 0;      /* any negatives in c? */
+  
+  /* differing lengths => incomparable */ 
+  if (a->length != b->length)
+    return 1;
+
+  /* Subtract b from a */ 
+  for (i=0; i < a->length; i++)
+    {
+      tmp = a->rank[i] - b->rank[i];
+      if (tmp > 0)
+        found_pos = 1;
+      else if (tmp < 0)
+        found_neg = 1;
+    }
+
+  if (found_pos)
+    {
+      if (found_neg)
+        return 1; /* incomparable */ 
+      else
+        return 3; /* A > B */ 
+    }
+  else /* no positives */ 
+    {
+      if (found_neg)
+        return 2; /* A < B */
+      else
+        return 0; /* A == B */
+    }
+}
+
+/* Rank a function by comparing its parameter types (PARMS, length NPARMS),
+ * to the types of an argument list (ARGS, length NARGS).
+ * Return a pointer to a badness vector. This has NARGS + 1 entries. */
+
+struct badness_vector *
+rank_function (parms, nparms, args, nargs)
+  struct type ** parms;
+  int nparms;
+  struct type ** args;
+  int nargs;
+{
+  int i;
+  struct badness_vector * bv;
+  int min_len = nparms < nargs ? nparms : nargs;
+
+  bv = xmalloc (sizeof (struct badness_vector));
+  bv->length = nargs + 1; /* add 1 for the length-match rank */ 
+  bv->rank = xmalloc ((nargs + 1) * sizeof (int));
+
+  /* First compare the lengths of the supplied lists.
+   * If there is a mismatch, set it to a high value. */
+   
+  /* pai/1997-06-03 FIXME: when we have debug info about default
+   * arguments and ellipsis parameter lists, we should consider those
+   * and rank the length-match more finely. */
+
+  LENGTH_MATCH (bv) = (nargs != nparms) ? LENGTH_MISMATCH_BADNESS : 0;
+
+  /* Now rank all the parameters of the candidate function */
+  for (i=1; i <= min_len; i++)
+    bv->rank[i] = rank_one_type (parms[i-1], args[i-1]);
+
+  /* If more arguments than parameters, add dummy entries */ 
+  for (i = min_len +1; i <= nargs; i++)
+    bv->rank[i] = TOO_FEW_PARAMS_BADNESS;
+
+  return bv;
+}
+
+/* Compare one type (PARM) for compatibility with another (ARG).
+ * PARM is intended to be the parameter type of a function; and
+ * ARG is the supplied argument's type.  This function tests if
+ * the latter can be converted to the former.
+ *
+ * Return 0 if they are identical types;
+ * Otherwise, return an integer which corresponds to how compatible
+ * PARM is to ARG. The higher the return value, the worse the match.
+ * Generally the "bad" conversions are all uniformly assigned a 100 */
+
+int
+rank_one_type (parm, arg)
+  struct type * parm;
+  struct type * arg;
+{
+  /* Identical type pointers */
+  /* However, this still doesn't catch all cases of same type for arg
+   * and param. The reason is that builtin types are different from
+   * the same ones constructed from the object. */
+  if (parm == arg)
+    return 0;
+
+  /* Resolve typedefs */
+  if (TYPE_CODE (parm) == TYPE_CODE_TYPEDEF)
+    parm = check_typedef (parm);
+  if (TYPE_CODE (arg) == TYPE_CODE_TYPEDEF)
+    arg = check_typedef (arg);
+
+  /* Check if identical after resolving typedefs */
+  if (parm == arg)
+    return 0;
+
+#if 0
+  /* Debugging only */ 
+  printf("------ Arg is %s [%d], parm is %s [%d]\n",
+         TYPE_NAME (arg), TYPE_CODE (arg), TYPE_NAME (parm), TYPE_CODE (parm));
+#endif
+
+  /* x -> y means arg of type x being supplied for parameter of type y */
+
+  switch (TYPE_CODE (parm))
+    {
+      case TYPE_CODE_PTR:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_PTR: 
+              if (TYPE_CODE (TYPE_TARGET_TYPE (parm)) == TYPE_CODE_VOID)
+                return VOID_PTR_CONVERSION_BADNESS;
+              else
+                return rank_one_type (TYPE_TARGET_TYPE (parm), TYPE_TARGET_TYPE (arg));
+            case TYPE_CODE_ARRAY:
+              return rank_one_type (TYPE_TARGET_TYPE (parm), TYPE_TARGET_TYPE (arg));
+            case TYPE_CODE_FUNC:
+              return rank_one_type (TYPE_TARGET_TYPE (parm), arg);
+            case TYPE_CODE_INT:
+            case TYPE_CODE_ENUM:
+            case TYPE_CODE_CHAR:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_BOOL:
+              return POINTER_CONVERSION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+      case TYPE_CODE_ARRAY:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_PTR:
+            case TYPE_CODE_ARRAY:
+              return rank_one_type (TYPE_TARGET_TYPE (parm), TYPE_TARGET_TYPE (arg));
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+      case TYPE_CODE_FUNC:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_PTR: /* funcptr -> func */
+              return rank_one_type (parm, TYPE_TARGET_TYPE (arg));
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+      case TYPE_CODE_INT:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_INT:
+              if (TYPE_LENGTH (arg) == TYPE_LENGTH (parm))
+                {
+                  /* Deal with signed, unsigned, and plain chars and
+                     signed and unsigned ints */
+                  if (TYPE_NOSIGN (parm))
+                    {
+                      /* This case only for character types */
+                      if (TYPE_NOSIGN (arg))  /* plain char -> plain char */
+                        return 0;
+                      else
+                        return INTEGER_COERCION_BADNESS; /* signed/unsigned char -> plain char */
+                    }
+                  else if (TYPE_UNSIGNED (parm))
+                    {
+                      if (TYPE_UNSIGNED (arg))
+                        {
+                          if (!strcmp (TYPE_NAME (parm), TYPE_NAME (arg))) 
+                            return 0;  /* unsigned int -> unsigned int, or unsigned long -> unsigned long */
+                          else if (!strcmp (TYPE_NAME (arg), "int") && !strcmp (TYPE_NAME (parm), "long"))
+                            return INTEGER_PROMOTION_BADNESS; /* unsigned int -> unsigned long */
+                          else
+                            return INTEGER_COERCION_BADNESS; /* unsigned long -> unsigned int */ 
+                        }
+                      else
+                        {
+                          if (!strcmp (TYPE_NAME (arg), "long") && !strcmp (TYPE_NAME (parm), "int"))
+                            return INTEGER_COERCION_BADNESS; /* signed long -> unsigned int */
+                          else 
+                            return INTEGER_CONVERSION_BADNESS; /* signed int/long -> unsigned int/long */ 
+                        }
+                    }
+                  else if (!TYPE_NOSIGN (arg) && !TYPE_UNSIGNED (arg))
+                    {
+                      if (!strcmp (TYPE_NAME (parm), TYPE_NAME (arg)))
+                        return 0;
+                      else if (!strcmp (TYPE_NAME (arg), "int") && !strcmp (TYPE_NAME (parm), "long"))
+                        return INTEGER_PROMOTION_BADNESS;
+                      else
+                        return INTEGER_COERCION_BADNESS;
+                    }
+                  else
+                    return INTEGER_COERCION_BADNESS;
+                }
+              else if (TYPE_LENGTH (arg) < TYPE_LENGTH (parm))
+                return INTEGER_PROMOTION_BADNESS;
+              else
+                return INTEGER_COERCION_BADNESS;
+            case TYPE_CODE_ENUM:
+            case TYPE_CODE_CHAR:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_BOOL:
+              return INTEGER_PROMOTION_BADNESS;
+            case TYPE_CODE_FLT:
+              return INT_FLOAT_CONVERSION_BADNESS;
+            case TYPE_CODE_PTR:
+              return NS_POINTER_CONVERSION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_ENUM:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_INT:
+            case TYPE_CODE_CHAR:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_BOOL:
+            case TYPE_CODE_ENUM:
+              return INTEGER_COERCION_BADNESS;
+            case TYPE_CODE_FLT:
+              return INT_FLOAT_CONVERSION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_CHAR:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_BOOL:
+            case TYPE_CODE_ENUM:
+              return INTEGER_COERCION_BADNESS;
+            case TYPE_CODE_FLT:
+              return INT_FLOAT_CONVERSION_BADNESS;
+            case TYPE_CODE_INT: 
+              if (TYPE_LENGTH (arg) > TYPE_LENGTH (parm))
+                return INTEGER_COERCION_BADNESS;
+              else if (TYPE_LENGTH (arg) < TYPE_LENGTH (parm))
+                return INTEGER_PROMOTION_BADNESS;
+              /* >>> !! else fall through !! <<< */ 
+            case TYPE_CODE_CHAR:
+              /* Deal with signed, unsigned, and plain chars for C++
+                 and with int cases falling through from previous case */
+              if (TYPE_NOSIGN (parm))
+                {
+                  if (TYPE_NOSIGN (arg))
+                    return 0;
+                  else
+                    return INTEGER_COERCION_BADNESS;
+                }
+              else if (TYPE_UNSIGNED (parm))
+                {
+                  if (TYPE_UNSIGNED (arg))
+                    return 0;
+                  else
+                    return INTEGER_PROMOTION_BADNESS;
+                }
+              else if (!TYPE_NOSIGN (arg) && !TYPE_UNSIGNED (arg))
+                return 0;
+              else
+                return INTEGER_COERCION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_RANGE:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_INT:
+            case TYPE_CODE_CHAR:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_BOOL:
+            case TYPE_CODE_ENUM:
+              return INTEGER_COERCION_BADNESS;
+            case TYPE_CODE_FLT:
+              return INT_FLOAT_CONVERSION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_BOOL:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_INT:
+            case TYPE_CODE_CHAR:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_ENUM:
+            case TYPE_CODE_FLT:
+            case TYPE_CODE_PTR:
+              return BOOLEAN_CONVERSION_BADNESS;
+            case TYPE_CODE_BOOL:
+              return 0;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_FLT:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_FLT:
+              if (TYPE_LENGTH (arg) < TYPE_LENGTH (parm))
+                return FLOAT_PROMOTION_BADNESS;
+              else if (TYPE_LENGTH (arg) == TYPE_LENGTH (parm))
+                return 0;
+              else
+                return FLOAT_CONVERSION_BADNESS;
+            case TYPE_CODE_INT:
+            case TYPE_CODE_BOOL:
+            case TYPE_CODE_ENUM:
+            case TYPE_CODE_RANGE:
+            case TYPE_CODE_CHAR:
+              return INT_FLOAT_CONVERSION_BADNESS;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_COMPLEX:
+        switch (TYPE_CODE (arg))
+          { /* Strictly not needed for C++, but... */
+            case TYPE_CODE_FLT:
+              return FLOAT_PROMOTION_BADNESS;
+            case TYPE_CODE_COMPLEX:
+              return 0;
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_STRUCT:
+      /* currently same as TYPE_CODE_CLASS */
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_STRUCT:
+              /* Check for derivation */
+              if (is_ancestor (parm, arg))
+                return BASE_CONVERSION_BADNESS;
+              /* else fall through */
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_UNION:
+        switch (TYPE_CODE (arg))
+          {
+            case TYPE_CODE_UNION:
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_MEMBER:
+        switch (TYPE_CODE (arg))
+          {
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_METHOD:
+        switch (TYPE_CODE (arg))
+          {
+            
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_REF:
+        switch (TYPE_CODE (arg))
+          {
+            
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+
+        break;
+      case TYPE_CODE_SET:
+        switch (TYPE_CODE (arg))
+          {
+            /* Not in C++ */
+            case TYPE_CODE_SET:
+              return rank_one_type (TYPE_FIELD_TYPE (parm, 0), TYPE_FIELD_TYPE (arg, 0));
+            default:
+              return INCOMPATIBLE_TYPE_BADNESS;
+          }
+        break;
+      case TYPE_CODE_VOID:
+      default:  
+        return INCOMPATIBLE_TYPE_BADNESS;
+    } /* switch (TYPE_CODE (arg)) */
+}
+
+ 
+/* End of functions for overload resolution */ 
+
+
+
+#if MAINTENANCE_CMDS
+
+static void
+print_bit_vector (bits, nbits)
+     B_TYPE *bits;
+     int nbits;
+{
+  int bitno;
+
+  for (bitno = 0; bitno < nbits; bitno++)
+    {
+      if ((bitno % 8) == 0)
+	{
+	  puts_filtered (" ");
+	}
+      if (B_TST (bits, bitno))
+	{
+	  printf_filtered ("1");
+	}
+      else
+	{
+	  printf_filtered ("0");
+	}
+    }
+}
+
+/* The args list is a strange beast.  It is either terminated by a NULL
+   pointer for varargs functions, or by a pointer to a TYPE_CODE_VOID
+   type for normal fixed argcount functions.  (FIXME someday)
+   Also note the first arg should be the "this" pointer, we may not want to
+   include it since we may get into a infinitely recursive situation. */
+
+static void
+print_arg_types (args, spaces)
+     struct type **args;
+     int spaces;
+{
+  if (args != NULL)
+    {
+      while (*args != NULL)
+	{
+	  recursive_dump_type (*args, spaces + 2);
+	  if ((*args++) -> code == TYPE_CODE_VOID)
+	    {
+	      break;
+	    }
+	}
+    }
+}
+
+static void
+dump_fn_fieldlists (type, spaces)
+     struct type *type;
+     int spaces;
+{
+  int method_idx;
+  int overload_idx;
+  struct fn_field *f;
+
+  printfi_filtered (spaces, "fn_fieldlists ");
+  gdb_print_address (TYPE_FN_FIELDLISTS (type), gdb_stdout);
+  printf_filtered ("\n");
+  for (method_idx = 0; method_idx < TYPE_NFN_FIELDS (type); method_idx++)
+    {
+      f = TYPE_FN_FIELDLIST1 (type, method_idx);
+      printfi_filtered (spaces + 2, "[%d] name '%s' (",
+			method_idx,
+			TYPE_FN_FIELDLIST_NAME (type, method_idx));
+      gdb_print_address (TYPE_FN_FIELDLIST_NAME (type, method_idx),
+			 gdb_stdout);
+      printf_filtered (") length %d\n",
+		       TYPE_FN_FIELDLIST_LENGTH (type, method_idx));
+      for (overload_idx = 0;
+	   overload_idx < TYPE_FN_FIELDLIST_LENGTH (type, method_idx);
+	   overload_idx++)
+	{
+	  printfi_filtered (spaces + 4, "[%d] physname '%s' (",
+			    overload_idx,
+			    TYPE_FN_FIELD_PHYSNAME (f, overload_idx));
+	  gdb_print_address (TYPE_FN_FIELD_PHYSNAME (f, overload_idx),
+			     gdb_stdout);
+	  printf_filtered (")\n");
+	  printfi_filtered (spaces + 8, "type ");
+	  gdb_print_address (TYPE_FN_FIELD_TYPE (f, overload_idx), gdb_stdout);
+	  printf_filtered ("\n");
+
+	  recursive_dump_type (TYPE_FN_FIELD_TYPE (f, overload_idx),
+			       spaces + 8 + 2);
+
+	  printfi_filtered (spaces + 8, "args ");
+	  gdb_print_address (TYPE_FN_FIELD_ARGS (f, overload_idx), gdb_stdout);
+	  printf_filtered ("\n");
+
+	  print_arg_types (TYPE_FN_FIELD_ARGS (f, overload_idx), spaces);
+	  printfi_filtered (spaces + 8, "fcontext ");
+	  gdb_print_address (TYPE_FN_FIELD_FCONTEXT (f, overload_idx),
+			     gdb_stdout);
+	  printf_filtered ("\n");
+
+	  printfi_filtered (spaces + 8, "is_const %d\n",
+			    TYPE_FN_FIELD_CONST (f, overload_idx));
+	  printfi_filtered (spaces + 8, "is_volatile %d\n",
+			    TYPE_FN_FIELD_VOLATILE (f, overload_idx));
+	  printfi_filtered (spaces + 8, "is_private %d\n",
+			    TYPE_FN_FIELD_PRIVATE (f, overload_idx));
+	  printfi_filtered (spaces + 8, "is_protected %d\n",
+			    TYPE_FN_FIELD_PROTECTED (f, overload_idx));
+	  printfi_filtered (spaces + 8, "is_stub %d\n",
+			    TYPE_FN_FIELD_STUB (f, overload_idx));
+	  printfi_filtered (spaces + 8, "voffset %u\n",
+			    TYPE_FN_FIELD_VOFFSET (f, overload_idx));
+	}
+    }
+}
+
+static void
+print_cplus_stuff (type, spaces)
+     struct type *type;
+     int spaces;
+{
+  printfi_filtered (spaces, "n_baseclasses %d\n",
+		    TYPE_N_BASECLASSES (type));
+  printfi_filtered (spaces, "nfn_fields %d\n",
+		    TYPE_NFN_FIELDS (type));
+  printfi_filtered (spaces, "nfn_fields_total %d\n",
+		    TYPE_NFN_FIELDS_TOTAL (type));
+  if (TYPE_N_BASECLASSES (type) > 0)
+    {
+      printfi_filtered (spaces, "virtual_field_bits (%d bits at *",
+			TYPE_N_BASECLASSES (type));
+      gdb_print_address (TYPE_FIELD_VIRTUAL_BITS (type), gdb_stdout);
+      printf_filtered (")");
+
+      print_bit_vector (TYPE_FIELD_VIRTUAL_BITS (type),
+			TYPE_N_BASECLASSES (type));
+      puts_filtered ("\n");
+    }
+  if (TYPE_NFIELDS (type) > 0)
+    {
+      if (TYPE_FIELD_PRIVATE_BITS (type) != NULL)
+	{
+	  printfi_filtered (spaces, "private_field_bits (%d bits at *",
+			    TYPE_NFIELDS (type));
+	  gdb_print_address (TYPE_FIELD_PRIVATE_BITS (type), gdb_stdout);
+	  printf_filtered (")");
+	  print_bit_vector (TYPE_FIELD_PRIVATE_BITS (type),
+			    TYPE_NFIELDS (type));
+	  puts_filtered ("\n");
+	}
+      if (TYPE_FIELD_PROTECTED_BITS (type) != NULL)
+	{
+	  printfi_filtered (spaces, "protected_field_bits (%d bits at *",
+			    TYPE_NFIELDS (type));
+	  gdb_print_address (TYPE_FIELD_PROTECTED_BITS (type), gdb_stdout);
+	  printf_filtered (")");
+	  print_bit_vector (TYPE_FIELD_PROTECTED_BITS (type),
+			    TYPE_NFIELDS (type));
+	  puts_filtered ("\n");
+	}
+    }
+  if (TYPE_NFN_FIELDS (type) > 0)
+    {
+      dump_fn_fieldlists (type, spaces);
+    }
+}
+
+static struct obstack dont_print_type_obstack;
+
+void
+recursive_dump_type (type, spaces)
+     struct type *type;
+     int spaces;
+{
+  int idx;
+
+  if (spaces == 0)
+    obstack_begin (&dont_print_type_obstack, 0);
+
+  if (TYPE_NFIELDS (type) > 0
+      || (TYPE_CPLUS_SPECIFIC (type) && TYPE_NFN_FIELDS (type) > 0))
+    {
+      struct type **first_dont_print
+	= (struct type **)obstack_base (&dont_print_type_obstack);
+
+      int i = (struct type **)obstack_next_free (&dont_print_type_obstack)
+	- first_dont_print;
+
+      while (--i >= 0)
+	{
+	  if (type == first_dont_print[i])
+	    {
+	      printfi_filtered (spaces, "type node ");
+	      gdb_print_address (type, gdb_stdout);
+	      printf_filtered (" <same as already seen type>\n");
+	      return;
+	    }
+	}
+
+      obstack_ptr_grow (&dont_print_type_obstack, type);
+    }
+
+  printfi_filtered (spaces, "type node ");
+  gdb_print_address (type, gdb_stdout);
+  printf_filtered ("\n");
+  printfi_filtered (spaces, "name '%s' (",
+		    TYPE_NAME (type) ? TYPE_NAME (type) : "<NULL>");
+  gdb_print_address (TYPE_NAME (type), gdb_stdout);
+  printf_filtered (")\n");
+  if (TYPE_TAG_NAME (type) != NULL)
+    {
+      printfi_filtered (spaces, "tagname '%s' (",
+			TYPE_TAG_NAME (type));
+      gdb_print_address (TYPE_TAG_NAME (type), gdb_stdout);
+      printf_filtered (")\n");
+    }
+  printfi_filtered (spaces, "code 0x%x ", TYPE_CODE (type));
+  switch (TYPE_CODE (type))
+    {
+      case TYPE_CODE_UNDEF:
+        printf_filtered ("(TYPE_CODE_UNDEF)");
+	break;
+      case TYPE_CODE_PTR:
+	printf_filtered ("(TYPE_CODE_PTR)");
+	break;
+      case TYPE_CODE_ARRAY:
+	printf_filtered ("(TYPE_CODE_ARRAY)");
+	break;
+      case TYPE_CODE_STRUCT:
+	printf_filtered ("(TYPE_CODE_STRUCT)");
+	break;
+      case TYPE_CODE_UNION:
+	printf_filtered ("(TYPE_CODE_UNION)");
+	break;
+      case TYPE_CODE_ENUM:
+	printf_filtered ("(TYPE_CODE_ENUM)");
+	break;
+      case TYPE_CODE_FUNC:
+	printf_filtered ("(TYPE_CODE_FUNC)");
+	break;
+      case TYPE_CODE_INT:
+	printf_filtered ("(TYPE_CODE_INT)");
+	break;
+      case TYPE_CODE_FLT:
+	printf_filtered ("(TYPE_CODE_FLT)");
+	break;
+      case TYPE_CODE_VOID:
+	printf_filtered ("(TYPE_CODE_VOID)");
+	break;
+      case TYPE_CODE_SET:
+	printf_filtered ("(TYPE_CODE_SET)");
+	break;
+      case TYPE_CODE_RANGE:
+	printf_filtered ("(TYPE_CODE_RANGE)");
+	break;
+      case TYPE_CODE_STRING:
+	printf_filtered ("(TYPE_CODE_STRING)");
+	break;
+      case TYPE_CODE_ERROR:
+	printf_filtered ("(TYPE_CODE_ERROR)");
+	break;
+      case TYPE_CODE_MEMBER:
+	printf_filtered ("(TYPE_CODE_MEMBER)");
+	break;
+      case TYPE_CODE_METHOD:
+	printf_filtered ("(TYPE_CODE_METHOD)");
+	break;
+      case TYPE_CODE_REF:
+	printf_filtered ("(TYPE_CODE_REF)");
+	break;
+      case TYPE_CODE_CHAR:
+	printf_filtered ("(TYPE_CODE_CHAR)");
+	break;
+      case TYPE_CODE_BOOL:
+	printf_filtered ("(TYPE_CODE_BOOL)");
+	break;
+      case TYPE_CODE_TYPEDEF:
+	printf_filtered ("(TYPE_CODE_TYPEDEF)");
+	break;
+      default:
+	printf_filtered ("(UNKNOWN TYPE CODE)");
+	break;
+    }
+  puts_filtered ("\n");
+  printfi_filtered (spaces, "length %d\n", TYPE_LENGTH (type));
+  printfi_filtered (spaces, "objfile ");
+  gdb_print_address (TYPE_OBJFILE (type), gdb_stdout);
+  printf_filtered ("\n");
+  printfi_filtered (spaces, "target_type ");
+  gdb_print_address (TYPE_TARGET_TYPE (type), gdb_stdout);
+  printf_filtered ("\n");
+  if (TYPE_TARGET_TYPE (type) != NULL)
+    {
+      recursive_dump_type (TYPE_TARGET_TYPE (type), spaces + 2);
+    }
+  printfi_filtered (spaces, "pointer_type ");
+  gdb_print_address (TYPE_POINTER_TYPE (type), gdb_stdout);
+  printf_filtered ("\n");
+  printfi_filtered (spaces, "reference_type ");
+  gdb_print_address (TYPE_REFERENCE_TYPE (type), gdb_stdout);
+  printf_filtered ("\n");
+  printfi_filtered (spaces, "flags 0x%x", TYPE_FLAGS (type));
+  if (TYPE_FLAGS (type) & TYPE_FLAG_UNSIGNED)
+    {
+      puts_filtered (" TYPE_FLAG_UNSIGNED");
+    }
+  if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
+    {
+      puts_filtered (" TYPE_FLAG_STUB");
+    }
+  puts_filtered ("\n");
+  printfi_filtered (spaces, "nfields %d ", TYPE_NFIELDS (type));
+  gdb_print_address (TYPE_FIELDS (type), gdb_stdout);
+  puts_filtered ("\n");
+  for (idx = 0; idx < TYPE_NFIELDS (type); idx++)
+    {
+      printfi_filtered (spaces + 2,
+			"[%d] bitpos %d bitsize %d type ",
+			idx, TYPE_FIELD_BITPOS (type, idx),
+			TYPE_FIELD_BITSIZE (type, idx));
+      gdb_print_address (TYPE_FIELD_TYPE (type, idx), gdb_stdout);
+      printf_filtered (" name '%s' (",
+		       TYPE_FIELD_NAME (type, idx) != NULL
+		       ? TYPE_FIELD_NAME (type, idx)
+		       : "<NULL>");
+      gdb_print_address (TYPE_FIELD_NAME (type, idx), gdb_stdout);
+      printf_filtered (")\n");
+      if (TYPE_FIELD_TYPE (type, idx) != NULL)
+	{
+	  recursive_dump_type (TYPE_FIELD_TYPE (type, idx), spaces + 4);
+	}
+    }
+  printfi_filtered (spaces, "vptr_basetype ");
+  gdb_print_address (TYPE_VPTR_BASETYPE (type), gdb_stdout);
+  puts_filtered ("\n");
+  if (TYPE_VPTR_BASETYPE (type) != NULL)
+    {
+      recursive_dump_type (TYPE_VPTR_BASETYPE (type), spaces + 2);
+    }
+  printfi_filtered (spaces, "vptr_fieldno %d\n", TYPE_VPTR_FIELDNO (type));
+  switch (TYPE_CODE (type))
+    {
+      case TYPE_CODE_METHOD:
+      case TYPE_CODE_FUNC:
+	printfi_filtered (spaces, "arg_types ");
+	gdb_print_address (TYPE_ARG_TYPES (type), gdb_stdout);
+	puts_filtered ("\n");
+	print_arg_types (TYPE_ARG_TYPES (type), spaces);
+	break;
+
+      case TYPE_CODE_STRUCT:
+	printfi_filtered (spaces, "cplus_stuff ");
+	gdb_print_address (TYPE_CPLUS_SPECIFIC (type), gdb_stdout);
+	puts_filtered ("\n");
+	print_cplus_stuff (type, spaces);
+	break;
+
+      default:
+	/* We have to pick one of the union types to be able print and test
+	   the value.  Pick cplus_struct_type, even though we know it isn't
+	   any particular one. */
+	printfi_filtered (spaces, "type_specific ");
+	gdb_print_address (TYPE_CPLUS_SPECIFIC (type), gdb_stdout);
+	if (TYPE_CPLUS_SPECIFIC (type) != NULL)
+	  {
+	    printf_filtered (" (unknown data form)");
+	  }
+	printf_filtered ("\n");
+	break;
+
+    }
+  if (spaces == 0)
+    obstack_free (&dont_print_type_obstack, NULL);
+}
+
+#endif	/* MAINTENANCE_CMDS */
+
+
+static void build_gdbtypes PARAMS ((void));
+static void
+build_gdbtypes ()
+{
+  builtin_type_void =
+    init_type (TYPE_CODE_VOID, 1,
+	       0,
+	       "void", (struct objfile *) NULL);
+  builtin_type_char =
+    init_type (TYPE_CODE_INT, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "char", (struct objfile *) NULL);
+  TYPE_FLAGS (builtin_type_char) |= TYPE_FLAG_NOSIGN;
+  
+  builtin_type_signed_char =
+    init_type (TYPE_CODE_INT, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "signed char", (struct objfile *) NULL);
+  builtin_type_unsigned_char =
+    init_type (TYPE_CODE_INT, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned char", (struct objfile *) NULL);
+  builtin_type_short =
+    init_type (TYPE_CODE_INT, TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "short", (struct objfile *) NULL);
+  builtin_type_unsigned_short =
+    init_type (TYPE_CODE_INT, TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned short", (struct objfile *) NULL);
+  builtin_type_int =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "int", (struct objfile *) NULL);
+  builtin_type_unsigned_int =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned int", (struct objfile *) NULL);
+  builtin_type_long =
+    init_type (TYPE_CODE_INT, TARGET_LONG_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "long", (struct objfile *) NULL);
+  builtin_type_unsigned_long =
+    init_type (TYPE_CODE_INT, TARGET_LONG_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned long", (struct objfile *) NULL);
+  builtin_type_long_long =
+    init_type (TYPE_CODE_INT, TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "long long", (struct objfile *) NULL);
+  builtin_type_unsigned_long_long = 
+    init_type (TYPE_CODE_INT, TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned long long", (struct objfile *) NULL);
+  builtin_type_float =
+    init_type (TYPE_CODE_FLT, TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "float", (struct objfile *) NULL);
+  builtin_type_double =
+    init_type (TYPE_CODE_FLT, TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "double", (struct objfile *) NULL);
+  builtin_type_long_double =
+    init_type (TYPE_CODE_FLT, TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "long double", (struct objfile *) NULL);
+  builtin_type_complex =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "complex", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (builtin_type_complex) = builtin_type_float;
+  builtin_type_double_complex =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "double complex", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (builtin_type_double_complex) = builtin_type_double;
+  builtin_type_string =
+    init_type (TYPE_CODE_STRING, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "string", (struct objfile *) NULL);
+  builtin_type_int8 =
+    init_type (TYPE_CODE_INT, 8 / 8,
+	       0,
+	       "int8_t", (struct objfile *) NULL);
+  builtin_type_uint8 =
+    init_type (TYPE_CODE_INT, 8 / 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "uint8_t", (struct objfile *) NULL);
+  builtin_type_int16 =
+    init_type (TYPE_CODE_INT, 16 / 8,
+	       0,
+	       "int16_t", (struct objfile *) NULL);
+  builtin_type_uint16 =
+    init_type (TYPE_CODE_INT, 16 / 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "uint16_t", (struct objfile *) NULL);
+  builtin_type_int32 =
+    init_type (TYPE_CODE_INT, 32 / 8,
+	       0,
+	       "int32_t", (struct objfile *) NULL);
+  builtin_type_uint32 =
+    init_type (TYPE_CODE_INT, 32 / 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "uint32_t", (struct objfile *) NULL);
+  builtin_type_int64 =
+    init_type (TYPE_CODE_INT, 64 / 8,
+	       0,
+	       "int64_t", (struct objfile *) NULL);
+  builtin_type_uint64 =
+    init_type (TYPE_CODE_INT, 64 / 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "uint64_t", (struct objfile *) NULL);
+  builtin_type_bool =
+    init_type (TYPE_CODE_BOOL, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "bool", (struct objfile *) NULL);
+
+  /* Add user knob for controlling resolution of opaque types */ 
+  add_show_from_set
+    (add_set_cmd ("opaque-type-resolution", class_support, var_boolean, (char *)&opaque_type_resolution,
+		  "Set resolution of opaque struct/class/union types (if set before loading symbols).",
+		  &setlist),
+     &showlist);
+  opaque_type_resolution = 1;
+
+}
+
+
+extern void _initialize_gdbtypes PARAMS ((void));
+void
+_initialize_gdbtypes ()
+{
+  build_gdbtypes ();
+}
diff --git a/gdb/gdbtypes.h b/gdb/gdbtypes.h
new file mode 100644
index 0000000..107eb46
--- /dev/null
+++ b/gdb/gdbtypes.h
@@ -0,0 +1,1135 @@
+/* Internal type definitions for GDB.
+   Copyright (C) 1992, 1993, 1994, 1996, 1998, 1999
+   Free Software Foundation, Inc.
+   Contributed by Cygnus Support, using pieces from other GDB modules.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (GDBTYPES_H)
+#define GDBTYPES_H 1
+
+/* Codes for `fundamental types'.  This is a monstrosity based on the
+   bogus notion that there are certain compiler-independent
+   `fundamental types'.  None of these is well-defined (how big is
+   FT_SHORT?  Does it depend on the language?  How does the
+   language-specific code know which type to correlate to FT_SHORT?)  */
+
+#define FT_VOID			0
+#define FT_BOOLEAN		1
+#define FT_CHAR			2 /* we use this for not-unsigned C/C++ chars */
+#define FT_SIGNED_CHAR		3 /* we use this for C++ signed chars */
+#define FT_UNSIGNED_CHAR	4 /* we use this for C/C++ unsigned chars */
+#define FT_SHORT		5
+#define FT_SIGNED_SHORT		6
+#define FT_UNSIGNED_SHORT	7
+#define FT_INTEGER		8
+#define FT_SIGNED_INTEGER	9
+#define FT_UNSIGNED_INTEGER	10
+#define FT_LONG			11
+#define FT_SIGNED_LONG		12
+#define FT_UNSIGNED_LONG	13
+#define FT_LONG_LONG		14
+#define FT_SIGNED_LONG_LONG	15
+#define FT_UNSIGNED_LONG_LONG	16
+#define FT_FLOAT		17
+#define FT_DBL_PREC_FLOAT	18
+#define FT_EXT_PREC_FLOAT	19
+#define FT_COMPLEX		20
+#define FT_DBL_PREC_COMPLEX	21
+#define FT_EXT_PREC_COMPLEX	22
+#define FT_STRING		23
+#define FT_FIXED_DECIMAL	24
+#define FT_FLOAT_DECIMAL	25
+#define FT_BYTE			26
+#define FT_UNSIGNED_BYTE	27
+#define FT_TEMPLATE_ARG		28
+
+#define FT_NUM_MEMBERS		29	/* Highest FT_* above, plus one. */
+
+/* Some macros for char-based bitfields.  */
+
+#define B_SET(a,x)	((a)[(x)>>3] |= (1 << ((x)&7)))
+#define B_CLR(a,x)	((a)[(x)>>3] &= ~(1 << ((x)&7)))
+#define B_TST(a,x)	((a)[(x)>>3] & (1 << ((x)&7)))
+#define B_TYPE		unsigned char
+#define	B_BYTES(x)	( 1 + ((x)>>3) )
+#define	B_CLRALL(a,x)	memset ((a), 0, B_BYTES(x))
+
+/* Different kinds of data types are distinguished by the `code' field.  */
+
+enum type_code
+{
+  TYPE_CODE_UNDEF,		/* Not used; catches errors */
+  TYPE_CODE_PTR,		/* Pointer type */
+  TYPE_CODE_ARRAY,		/* Array type with lower & upper bounds. */
+  TYPE_CODE_STRUCT,		/* C struct or Pascal record */
+  TYPE_CODE_UNION,		/* C union or Pascal variant part */
+  TYPE_CODE_ENUM,		/* Enumeration type */
+  TYPE_CODE_FUNC,		/* Function type */
+  TYPE_CODE_INT,		/* Integer type */
+
+  /* Floating type.  This is *NOT* a complex type.  Beware, there are parts
+     of GDB which bogusly assume that TYPE_CODE_FLT can mean complex.  */
+  TYPE_CODE_FLT,
+
+  /* Void type.  The length field specifies the length (probably always
+     one) which is used in pointer arithmetic involving pointers to
+     this type, but actually dereferencing such a pointer is invalid;
+     a void type has no length and no actual representation in memory
+     or registers.  A pointer to a void type is a generic pointer.  */
+  TYPE_CODE_VOID,
+
+  TYPE_CODE_SET,		/* Pascal sets */
+  TYPE_CODE_RANGE,		/* Range (integers within spec'd bounds) */
+
+  /* A string type which is like an array of character but prints
+     differently (at least for CHILL).  It does not contain a length
+     field as Pascal strings (for many Pascals, anyway) do; if we want
+     to deal with such strings, we should use a new type code.  */
+  TYPE_CODE_STRING,
+
+  /* String of bits; like TYPE_CODE_SET but prints differently (at least
+     for CHILL).  */
+  TYPE_CODE_BITSTRING,
+
+  /* Unknown type.  The length field is valid if we were able to
+     deduce that much about the type, or 0 if we don't even know that.  */
+  TYPE_CODE_ERROR,
+
+  /* C++ */
+  TYPE_CODE_MEMBER,		/* Member type */
+  TYPE_CODE_METHOD,		/* Method type */
+  TYPE_CODE_REF,		/* C++ Reference types */
+
+  TYPE_CODE_CHAR,		/* *real* character type */
+
+  /* Boolean type.  0 is false, 1 is true, and other values are non-boolean
+     (e.g. FORTRAN "logical" used as unsigned int).  */
+  TYPE_CODE_BOOL,
+
+  /* Fortran */
+  TYPE_CODE_COMPLEX,		/* Complex float */
+
+  TYPE_CODE_TYPEDEF,
+  TYPE_CODE_TEMPLATE,		/* C++ template */
+  TYPE_CODE_TEMPLATE_ARG	/* C++ template arg */
+
+};
+
+/* For now allow source to use TYPE_CODE_CLASS for C++ classes, as an
+   alias for TYPE_CODE_STRUCT.  This is for DWARF, which has a distinct
+   "class" attribute.  Perhaps we should actually have a separate TYPE_CODE
+   so that we can print "class" or "struct" depending on what the debug
+   info said.  It's not clear we should bother.  */
+
+#define TYPE_CODE_CLASS TYPE_CODE_STRUCT
+
+/* Some bits for the type's flags word. */
+
+/* Unsigned integer type.  If this is not set for a TYPE_CODE_INT, the
+   type is signed (unless TYPE_FLAG_NOSIGN (below) is set). */
+
+#define TYPE_FLAG_UNSIGNED	(1 << 0)
+
+/* No sign for this type.  In C++, "char", "signed char", and "unsigned
+   char" are distinct types; so we need an extra flag to indicate the
+   absence ofa sign! */
+
+#define TYPE_FLAG_NOSIGN	(1 << 1)
+
+/* This appears in a type's flags word if it is a stub type (e.g., if
+   someone referenced a type that wasn't defined in a source file
+   via (struct sir_not_appearing_in_this_film *)).  */
+
+#define TYPE_FLAG_STUB		(1 << 2)
+
+/* The target type of this type is a stub type, and this type needs to
+   be updated if it gets un-stubbed in check_typedef.
+   Used for arrays and ranges, in which TYPE_LENGTH of the array/range
+   gets set based on the TYPE_LENGTH of the target type.
+   Also, set for TYPE_CODE_TYPEDEF. */
+
+#define TYPE_FLAG_TARGET_STUB (1 << 3)
+
+/* Static type.  If this is set, the corresponding type had 
+ * a static modifier.
+ * Note: This may be unnecessary, since static data members
+ * are indicated by other means (bitpos == -1)
+ */
+
+#define TYPE_FLAG_STATIC (1 << 4)
+
+/* Constant type.  If this is set, the corresponding type has a
+ * const modifier.
+ */
+
+#define TYPE_FLAG_CONST (1 << 5)
+
+/* Volatile type.  If this is set, the corresponding type has a
+ * volatile modifier.
+ */
+
+#define TYPE_FLAG_VOLATILE (1 << 6)
+
+
+/* This is a function type which appears to have a prototype.  We need this
+   for function calls in order to tell us if it's necessary to coerce the args,
+   or to just do the standard conversions.  This is used with a short field. */
+
+#define TYPE_FLAG_PROTOTYPED (1 << 7)
+
+/* This flag is used to indicate that processing for this type
+   is incomplete.
+ 
+   (Mostly intended for HP platforms, where class methods, for
+   instance, can be encountered before their classes in the debug
+   info; the incomplete type has to be marked so that the class and
+   the method can be assigned correct types.) */
+
+#define TYPE_FLAG_INCOMPLETE (1 << 8)
+
+
+struct type
+{
+
+  /* Code for kind of type */
+
+  enum type_code code;
+
+  /* Name of this type, or NULL if none.
+
+     This is used for printing only, except by poorly designed C++ code.
+     For looking up a name, look for a symbol in the VAR_NAMESPACE.  */
+
+  char *name;
+
+  /* Tag name for this type, or NULL if none.  This means that the
+     name of the type consists of a keyword followed by the tag name.
+     Which keyword is determined by the type code ("struct" for
+     TYPE_CODE_STRUCT, etc.).  As far as I know C/C++ are the only languages
+     with this feature.
+
+     This is used for printing only, except by poorly designed C++ code.
+     For looking up a name, look for a symbol in the STRUCT_NAMESPACE.
+     One more legitimate use is that if TYPE_FLAG_STUB is set, this is
+     the name to use to look for definitions in other files.  */
+
+  char *tag_name;
+
+  /* Length of storage for a value of this type.  Various places pass
+     this to memcpy and such, meaning it must be in units of
+     HOST_CHAR_BIT.  Various other places expect they can calculate
+     addresses by adding it and such, meaning it must be in units of
+     TARGET_CHAR_BIT.  For some DSP targets, in which HOST_CHAR_BIT
+     will (presumably) be 8 and TARGET_CHAR_BIT will be (say) 32, this
+     is a problem.  One fix would be to make this field in bits
+     (requiring that it always be a multiple of HOST_CHAR_BIT and
+     TARGET_CHAR_BIT)--the other choice would be to make it
+     consistently in units of HOST_CHAR_BIT.  */
+
+  unsigned length;
+
+  /* FIXME, these should probably be restricted to a Fortran-specific
+     field in some fashion.  */
+#define BOUND_CANNOT_BE_DETERMINED   5
+#define BOUND_BY_REF_ON_STACK        4
+#define BOUND_BY_VALUE_ON_STACK      3
+#define BOUND_BY_REF_IN_REG          2
+#define BOUND_BY_VALUE_IN_REG        1
+#define BOUND_SIMPLE                 0
+  int upper_bound_type;
+  int lower_bound_type;
+
+  /* Every type is now associated with a particular objfile, and the
+     type is allocated on the type_obstack for that objfile.  One problem
+     however, is that there are times when gdb allocates new types while
+     it is not in the process of reading symbols from a particular objfile.
+     Fortunately, these happen when the type being created is a derived
+     type of an existing type, such as in lookup_pointer_type().  So
+     we can just allocate the new type using the same objfile as the
+     existing type, but to do this we need a backpointer to the objfile
+     from the existing type.  Yes this is somewhat ugly, but without
+     major overhaul of the internal type system, it can't be avoided
+     for now. */
+
+  struct objfile *objfile;
+
+  /* For a pointer type, describes the type of object pointed to.
+     For an array type, describes the type of the elements.
+     For a function or method type, describes the type of the return value.
+     For a range type, describes the type of the full range.
+     For a complex type, describes the type of each coordinate.
+     Unused otherwise.  */
+
+  struct type *target_type;
+
+  /* Type that is a pointer to this type.
+     NULL if no such pointer-to type is known yet.
+     The debugger may add the address of such a type
+     if it has to construct one later.  */ 
+
+  struct type *pointer_type;
+
+  /* C++: also need a reference type.  */
+
+  struct type *reference_type;
+
+  /* C-v variant chain. This points to a type that
+     differs from this one only in a const or volatile
+     attribute (or both). The various c-v variants
+     are chained together in a ring. */
+  struct type *cv_type;
+
+  /* Flags about this type.  */
+
+  int flags;
+
+  /* Number of fields described for this type */
+
+  short nfields;
+
+  /* For structure and union types, a description of each field.
+     For set and pascal array types, there is one "field",
+     whose type is the domain type of the set or array.
+     For range types, there are two "fields",
+     the minimum and maximum values (both inclusive).
+     For enum types, each possible value is described by one "field".
+     For a function type, a "field" for each parameter type.
+     For C++ classes, there is one field for each base class (if it is
+     a derived class) plus one field for each class data member.  Member
+     functions are recorded elsewhere.
+
+     Using a pointer to a separate array of fields
+     allows all types to have the same size, which is useful
+     because we can allocate the space for a type before
+     we know what to put in it.  */
+
+  struct field
+    {
+
+
+
+      union field_location
+        {
+	  /* Position of this field, counting in bits from start of
+	     containing structure.
+	     For BITS_BIG_ENDIAN=1 targets, it is the bit offset to the MSB.
+	     For BITS_BIG_ENDIAN=0 targets, it is the bit offset to the LSB.
+	     For a function type, this is the position in the argument list
+	     of this argument.
+	     For a range bound or enum value, this is the value itself. */
+
+	  int bitpos;
+
+	  /* For a static field, if TYPE_FIELD_STATIC_HAS_ADDR then physaddr
+	     is the location (in the target) of the static field.
+	     Otherwise, physname is the mangled label of the static field. */
+
+	  CORE_ADDR physaddr;
+	  char* physname;
+      } loc;
+
+      /* Size of this field, in bits, or zero if not packed.
+	 For an unpacked field, the field's type's length
+	 says how many bytes the field occupies.
+	 A value of -1 or -2 indicates a static field;  -1 means the location
+	 is specified by the label loc.physname;  -2 means that loc.physaddr
+	 specifies the actual address. */
+
+      int bitsize;
+
+      /* In a struct or union type, type of this field.
+	 In a function type, type of this argument.
+	 In an array type, the domain-type of the array.  */
+
+      struct type *type;
+
+      /* Name of field, value or argument.
+	 NULL for range bounds and array domains.  */
+
+      char *name;
+
+    } *fields;
+
+  /* For types with virtual functions (TYPE_CODE_STRUCT), VPTR_BASETYPE
+     is the base class which defined the virtual function table pointer.  
+
+     For types that are pointer to member types (TYPE_CODE_MEMBER),
+     VPTR_BASETYPE is the type that this pointer is a member of.
+
+     For method types (TYPE_CODE_METHOD), VPTR_BASETYPE is the aggregate
+     type that contains the method.
+
+     Unused otherwise.  */
+
+  struct type *vptr_basetype;
+
+  /* Field number of the virtual function table pointer in
+     VPTR_BASETYPE.  If -1, we were unable to find the virtual
+     function table pointer in initial symbol reading, and
+     fill_in_vptr_fieldno should be called to find it if possible.
+
+     Unused if this type does not have virtual functions.  */
+
+  int vptr_fieldno;
+
+  /* Slot to point to additional language-specific fields of this type.  */
+
+  union type_specific
+    {
+
+      /* ARG_TYPES is for TYPE_CODE_METHOD.
+	 Contains the type of each argument, ending with a void type
+	 after the last argument for normal member functions or a NULL
+	 pointer after the last argument for functions with variable
+	 arguments.  */
+
+      struct type **arg_types;
+
+      /* CPLUS_STUFF is for TYPE_CODE_STRUCT.  It is initialized to point to
+	 cplus_struct_default, a default static instance of a struct
+	 cplus_struct_type. */
+
+      struct cplus_struct_type *cplus_stuff;
+
+    } type_specific;
+};
+
+#define	NULL_TYPE ((struct type *) 0)
+
+/* C++ language-specific information for TYPE_CODE_STRUCT and TYPE_CODE_UNION
+   nodes.  */
+
+struct cplus_struct_type
+{
+  /* Number of base classes this type derives from.  The baseclasses are
+     stored in the first N_BASECLASSES fields (i.e. the `fields' field of
+     the struct type).  I think only the `type' field of such a field has
+     any meaning.  */
+
+  short n_baseclasses;
+
+  /* Number of methods with unique names.  All overloaded methods with
+     the same name count only once. */
+
+  short nfn_fields;
+
+  /* Number of methods described for this type, not including the
+     methods that it derives from.  */
+
+  short nfn_fields_total;
+
+  /* The "declared_type" field contains a code saying how the
+     user really declared this type, e.g., "class s", "union s",
+     "struct s".
+     The 3 above things come out from the C++ compiler looking like classes, 
+     but we keep track of the real declaration so we can give
+     the correct information on "ptype". (Note: TEMPLATE may not
+     belong in this list...)  */
+
+#define DECLARED_TYPE_CLASS 0
+#define DECLARED_TYPE_UNION 1
+#define DECLARED_TYPE_STRUCT 2
+#define DECLARED_TYPE_TEMPLATE 3
+  short declared_type; /* One of the above codes */
+ 
+  /* For derived classes, the number of base classes is given by n_baseclasses
+     and virtual_field_bits is a bit vector containing one bit per base class.
+     If the base class is virtual, the corresponding bit will be set.
+     I.E, given:
+
+	class A{};
+	class B{};
+	class C : public B, public virtual A {};
+
+     B is a baseclass of C; A is a virtual baseclass for C.
+     This is a C++ 2.0 language feature. */
+
+  B_TYPE *virtual_field_bits;
+
+  /* For classes with private fields, the number of fields is given by
+     nfields and private_field_bits is a bit vector containing one bit
+     per field.
+     If the field is private, the corresponding bit will be set. */
+
+  B_TYPE *private_field_bits;
+
+  /* For classes with protected fields, the number of fields is given by
+     nfields and protected_field_bits is a bit vector containing one bit
+     per field.
+     If the field is private, the corresponding bit will be set. */
+
+  B_TYPE *protected_field_bits;
+
+  /* for classes with fields to be ignored, either this is optimized out
+     or this field has length 0 */
+
+  B_TYPE *ignore_field_bits;
+
+  /* For classes, structures, and unions, a description of each field,
+     which consists of an overloaded name, followed by the types of
+     arguments that the method expects, and then the name after it
+     has been renamed to make it distinct.
+
+     fn_fieldlists points to an array of nfn_fields of these. */
+
+  struct fn_fieldlist
+    {
+
+      /* The overloaded name.  */
+
+      char *name;
+
+      /* The number of methods with this name.  */
+
+      int length;
+
+      /* The list of methods.  */
+
+      struct fn_field
+	{
+
+	  /* If is_stub is clear, this is the mangled name which we can
+	     look up to find the address of the method (FIXME: it would
+	     be cleaner to have a pointer to the struct symbol here
+	     instead).  */
+
+	  /* If is_stub is set, this is the portion of the mangled
+	     name which specifies the arguments.  For example, "ii",
+	     if there are two int arguments, or "" if there are no
+	     arguments.  See gdb_mangle_name for the conversion from this
+	     format to the one used if is_stub is clear.  */
+
+	  char *physname;
+
+          /* The function type for the method.
+             (This comment used to say "The return value of the method",
+             but that's wrong. The function type 
+             is expected here, i.e. something with TYPE_CODE_FUNC,
+             and *not* the return-value type). */
+
+	  struct type *type;
+
+	  /* The argument list.  Only valid if is_stub is clear.  Contains
+	     the type of each argument, including `this', and ending with
+	     a NULL pointer after the last argument.  Should not contain
+	     a `this' pointer for static member functions.  */
+
+	  struct type **args;
+
+	  /* For virtual functions.
+	     First baseclass that defines this virtual function.   */
+
+	  struct type *fcontext;
+
+	  /* Attributes. */
+
+	  unsigned int is_const : 1;
+	  unsigned int is_volatile : 1;
+	  unsigned int is_private : 1;
+	  unsigned int is_protected : 1;
+	  unsigned int is_public : 1;
+	  unsigned int is_abstract : 1;
+	  unsigned int is_static : 1;
+	  unsigned int is_final : 1;
+	  unsigned int is_synchronized : 1;
+	  unsigned int is_native : 1;
+
+	  /* A stub method only has some fields valid (but they are enough
+	     to reconstruct the rest of the fields).  */
+	  unsigned int is_stub : 1;
+
+          /* C++ method that is inlined */ 
+          unsigned int is_inlined : 1;
+
+	  /* Unused.  */
+	  unsigned int dummy : 4;
+
+	  /* Index into that baseclass's virtual function table,
+	     minus 2; else if static: VOFFSET_STATIC; else: 0.  */
+
+	  unsigned int voffset : 16;
+
+#	  define VOFFSET_STATIC 1
+
+	} *fn_fields;
+
+    } *fn_fieldlists;
+
+    /* If this "struct type" describes a template, then it 
+     * has arguments. "template_args" points to an array of
+     * template arg descriptors, of length "ntemplate_args".
+     * The only real information in each of these template arg descriptors
+     * is a name. "type" will typically just point to a "struct type" with
+     * the placeholder TYPE_CODE_TEMPLATE_ARG type.
+     */
+    short ntemplate_args;
+    struct template_arg
+    {
+      char *name;
+      struct type *type;
+    } *template_args;
+
+    /* If this "struct type" describes a template, it has a list
+     * of instantiations. "instantiations" is a pointer to an array
+     * of type's, one representing each instantiation. There
+     * are "ninstantiations" elements in this array.
+     */
+    short ninstantiations;
+    struct type **instantiations;
+
+    /* The following points to information relevant to the runtime model
+     * of the compiler.
+     * Currently being used only for HP's ANSI C++ compiler.
+     * (This type may have to be changed/enhanced for other compilers.)
+     *
+     * RUNTIME_PTR is NULL if there is no runtime information (currently
+     * this means the type was not compiled by HP aCC).
+     *
+     * Fields in structure pointed to:
+     * ->HAS_VTABLE : 0 => no virtual table, 1 => vtable present
+     * 
+     * ->PRIMARY_BASE points to the first non-virtual base class that has
+     * a virtual table.
+     *
+     * ->VIRTUAL_BASE_LIST points to a list of struct type * pointers that
+     * point to the type information for all virtual bases among this type's
+     * ancestors.
+     */
+    struct runtime_info {
+      short has_vtable;
+      struct type * primary_base;
+      struct type ** virtual_base_list;
+    } * runtime_ptr;
+
+    /* Pointer to information about enclosing scope, if this is a
+     * local type.  If it is not a local type, this is NULL
+     */
+    struct local_type_info {
+      char * file;
+      int line;
+    } * localtype_ptr;  
+};
+
+/* Struct used in computing virtual base list */
+struct vbase
+{
+    struct type * vbasetype;  /* pointer to virtual base */
+    struct vbase * next;      /* next in chain */
+};
+
+/* Struct used for ranking a function for overload resolution */
+struct badness_vector {
+  int length;
+  int * rank;
+};
+
+/* The default value of TYPE_CPLUS_SPECIFIC(T) points to the
+   this shared static structure. */
+
+extern const struct cplus_struct_type cplus_struct_default;
+
+extern void
+allocate_cplus_struct_type PARAMS ((struct type *));
+
+#define INIT_CPLUS_SPECIFIC(type) \
+  (TYPE_CPLUS_SPECIFIC(type)=(struct cplus_struct_type*)&cplus_struct_default)
+#define ALLOCATE_CPLUS_STRUCT_TYPE(type) allocate_cplus_struct_type (type)
+#define HAVE_CPLUS_STRUCT(type) \
+  (TYPE_CPLUS_SPECIFIC(type) != &cplus_struct_default)
+
+#define TYPE_NAME(thistype) (thistype)->name
+#define TYPE_TAG_NAME(type) ((type)->tag_name)
+#define TYPE_TARGET_TYPE(thistype) (thistype)->target_type
+#define TYPE_POINTER_TYPE(thistype) (thistype)->pointer_type
+#define TYPE_REFERENCE_TYPE(thistype) (thistype)->reference_type
+#define TYPE_CV_TYPE(thistype) (thistype)->cv_type
+/* Note that if thistype is a TYPEDEF type, you have to call check_typedef.
+   But check_typedef does set the TYPE_LENGTH of the TYPEDEF type,
+   so you only have to call check_typedef once.  Since allocate_value
+   calls check_typedef, TYPE_LENGTH (VALUE_TYPE (X)) is safe.  */
+#define TYPE_LENGTH(thistype) (thistype)->length
+#define TYPE_OBJFILE(thistype) (thistype)->objfile
+#define TYPE_FLAGS(thistype) (thistype)->flags
+#define TYPE_UNSIGNED(thistype) ((thistype)->flags & TYPE_FLAG_UNSIGNED)
+#define TYPE_NOSIGN(thistype) ((thistype)->flags & TYPE_FLAG_NOSIGN)
+#define TYPE_CONST(thistype) ((thistype)->flags & TYPE_FLAG_CONST)
+#define TYPE_VOLATILE(thistype) ((thistype)->flags & TYPE_FLAG_VOLATILE)
+#define TYPE_INCOMPLETE(thistype) ((thistype)->flags & TYPE_FLAG_INCOMPLETE)
+/* Note that TYPE_CODE can be TYPE_CODE_TYPEDEF, so if you wan the real
+   type, you need to do TYPE_CODE (check_type (this_type)). */
+#define TYPE_CODE(thistype) (thistype)->code
+#define TYPE_NFIELDS(thistype) (thistype)->nfields
+#define TYPE_FIELDS(thistype) (thistype)->fields
+#define TYPE_TEMPLATE_ARGS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->template_args
+#define TYPE_INSTANTIATIONS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->instantiations
+
+#define TYPE_INDEX_TYPE(type) TYPE_FIELD_TYPE (type, 0)
+#define TYPE_LOW_BOUND(range_type) TYPE_FIELD_BITPOS (range_type, 0)
+#define TYPE_HIGH_BOUND(range_type) TYPE_FIELD_BITPOS (range_type, 1)
+
+/* Moto-specific stuff for FORTRAN arrays */
+
+#define TYPE_ARRAY_UPPER_BOUND_TYPE(thistype) (thistype)->upper_bound_type
+#define TYPE_ARRAY_LOWER_BOUND_TYPE(thistype) (thistype)->lower_bound_type
+
+#define TYPE_ARRAY_UPPER_BOUND_VALUE(arraytype) \
+   (TYPE_FIELD_BITPOS((TYPE_FIELD_TYPE((arraytype),0)),1))
+
+#define TYPE_ARRAY_LOWER_BOUND_VALUE(arraytype) \
+   (TYPE_FIELD_BITPOS((TYPE_FIELD_TYPE((arraytype),0)),0))
+
+/* C++ */
+
+#define TYPE_VPTR_BASETYPE(thistype) (thistype)->vptr_basetype
+#define TYPE_DOMAIN_TYPE(thistype) (thistype)->vptr_basetype
+#define TYPE_VPTR_FIELDNO(thistype) (thistype)->vptr_fieldno
+#define TYPE_FN_FIELDS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->fn_fields
+#define TYPE_NFN_FIELDS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->nfn_fields
+#define TYPE_NFN_FIELDS_TOTAL(thistype) TYPE_CPLUS_SPECIFIC(thistype)->nfn_fields_total
+#define TYPE_NTEMPLATE_ARGS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->ntemplate_args
+#define TYPE_NINSTANTIATIONS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->ninstantiations
+#define TYPE_DECLARED_TYPE(thistype) TYPE_CPLUS_SPECIFIC(thistype)->declared_type
+#define	TYPE_TYPE_SPECIFIC(thistype) (thistype)->type_specific
+#define TYPE_ARG_TYPES(thistype) (thistype)->type_specific.arg_types
+#define TYPE_CPLUS_SPECIFIC(thistype) (thistype)->type_specific.cplus_stuff
+#define TYPE_BASECLASS(thistype,index) (thistype)->fields[index].type
+#define TYPE_N_BASECLASSES(thistype) TYPE_CPLUS_SPECIFIC(thistype)->n_baseclasses
+#define TYPE_BASECLASS_NAME(thistype,index) (thistype)->fields[index].name
+#define TYPE_BASECLASS_BITPOS(thistype,index) TYPE_FIELD_BITPOS(thistype,index)
+#define BASETYPE_VIA_PUBLIC(thistype, index) \
+  ((!TYPE_FIELD_PRIVATE(thistype, index)) && (!TYPE_FIELD_PROTECTED(thistype, index)))
+
+#define BASETYPE_VIA_VIRTUAL(thistype, index) \
+  (TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits == NULL ? 0 \
+    : B_TST(TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits, (index)))
+
+#define FIELD_TYPE(thisfld) ((thisfld).type)
+#define FIELD_NAME(thisfld) ((thisfld).name)
+#define FIELD_BITPOS(thisfld) ((thisfld).loc.bitpos)
+#define FIELD_BITSIZE(thisfld) ((thisfld).bitsize)
+#define FIELD_PHYSNAME(thisfld) ((thisfld).loc.physname)
+#define FIELD_PHYSADDR(thisfld) ((thisfld).loc.physaddr)
+#define SET_FIELD_PHYSNAME(thisfld, name) \
+  ((thisfld).bitsize = -1, FIELD_PHYSNAME(thisfld) = (name))
+#define SET_FIELD_PHYSADDR(thisfld, name) \
+  ((thisfld).bitsize = -2, FIELD_PHYSADDR(thisfld) = (name))
+#define TYPE_FIELD(thistype, n) (thistype)->fields[n]
+#define TYPE_FIELD_TYPE(thistype, n) FIELD_TYPE(TYPE_FIELD(thistype, n))
+#define TYPE_FIELD_NAME(thistype, n) FIELD_NAME(TYPE_FIELD(thistype, n))
+#define TYPE_FIELD_BITPOS(thistype, n) FIELD_BITPOS(TYPE_FIELD(thistype,n))
+#define TYPE_FIELD_BITSIZE(thistype, n) FIELD_BITSIZE(TYPE_FIELD(thistype,n))
+#define TYPE_FIELD_PACKED(thistype, n) (FIELD_BITSIZE(TYPE_FIELD(thistype,n))!=0)
+#define TYPE_TEMPLATE_ARG(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->template_args[n]
+#define TYPE_INSTANTIATION(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->instantiations[n]
+
+#define TYPE_FIELD_PRIVATE_BITS(thistype) \
+  TYPE_CPLUS_SPECIFIC(thistype)->private_field_bits
+#define TYPE_FIELD_PROTECTED_BITS(thistype) \
+  TYPE_CPLUS_SPECIFIC(thistype)->protected_field_bits
+#define TYPE_FIELD_IGNORE_BITS(thistype) \
+  TYPE_CPLUS_SPECIFIC(thistype)->ignore_field_bits
+#define TYPE_FIELD_VIRTUAL_BITS(thistype) \
+  TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits
+#define SET_TYPE_FIELD_PRIVATE(thistype, n) \
+  B_SET (TYPE_CPLUS_SPECIFIC(thistype)->private_field_bits, (n))
+#define SET_TYPE_FIELD_PROTECTED(thistype, n) \
+  B_SET (TYPE_CPLUS_SPECIFIC(thistype)->protected_field_bits, (n))
+#define SET_TYPE_FIELD_IGNORE(thistype, n) \
+  B_SET (TYPE_CPLUS_SPECIFIC(thistype)->ignore_field_bits, (n))
+#define SET_TYPE_FIELD_VIRTUAL(thistype, n) \
+  B_SET (TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits, (n))
+#define TYPE_FIELD_PRIVATE(thistype, n) \
+  (TYPE_CPLUS_SPECIFIC(thistype)->private_field_bits == NULL ? 0 \
+    : B_TST(TYPE_CPLUS_SPECIFIC(thistype)->private_field_bits, (n)))
+#define TYPE_FIELD_PROTECTED(thistype, n) \
+  (TYPE_CPLUS_SPECIFIC(thistype)->protected_field_bits == NULL ? 0 \
+    : B_TST(TYPE_CPLUS_SPECIFIC(thistype)->protected_field_bits, (n)))
+#define TYPE_FIELD_IGNORE(thistype, n) \
+  (TYPE_CPLUS_SPECIFIC(thistype)->ignore_field_bits == NULL ? 0 \
+    : B_TST(TYPE_CPLUS_SPECIFIC(thistype)->ignore_field_bits, (n)))
+#define TYPE_FIELD_VIRTUAL(thistype, n) \
+  (TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits == NULL ? 0 \
+    : B_TST(TYPE_CPLUS_SPECIFIC(thistype)->virtual_field_bits, (n)))
+
+#define TYPE_FIELD_STATIC(thistype, n) ((thistype)->fields[n].bitsize < 0)
+#define TYPE_FIELD_STATIC_HAS_ADDR(thistype, n) ((thistype)->fields[n].bitsize == -2)
+#define TYPE_FIELD_STATIC_PHYSNAME(thistype, n) FIELD_PHYSNAME(TYPE_FIELD(thistype, n))
+#define TYPE_FIELD_STATIC_PHYSADDR(thistype, n) FIELD_PHYSADDR(TYPE_FIELD(thistype, n))
+
+#define TYPE_FN_FIELDLISTS(thistype) TYPE_CPLUS_SPECIFIC(thistype)->fn_fieldlists
+#define TYPE_FN_FIELDLIST(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->fn_fieldlists[n]
+#define TYPE_FN_FIELDLIST1(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->fn_fieldlists[n].fn_fields
+#define TYPE_FN_FIELDLIST_NAME(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->fn_fieldlists[n].name
+#define TYPE_FN_FIELDLIST_LENGTH(thistype, n) TYPE_CPLUS_SPECIFIC(thistype)->fn_fieldlists[n].length
+
+#define TYPE_FN_FIELD(thisfn, n) (thisfn)[n]
+#define TYPE_FN_FIELD_PHYSNAME(thisfn, n) (thisfn)[n].physname
+#define TYPE_FN_FIELD_TYPE(thisfn, n) (thisfn)[n].type
+#define TYPE_FN_FIELD_ARGS(thisfn, n) TYPE_ARG_TYPES ((thisfn)[n].type)
+#define TYPE_FN_FIELD_CONST(thisfn, n) ((thisfn)[n].is_const)
+#define TYPE_FN_FIELD_VOLATILE(thisfn, n) ((thisfn)[n].is_volatile)
+#define TYPE_FN_FIELD_PRIVATE(thisfn, n) ((thisfn)[n].is_private)
+#define TYPE_FN_FIELD_PROTECTED(thisfn, n) ((thisfn)[n].is_protected)
+#define TYPE_FN_FIELD_PUBLIC(thisfn, n) ((thisfn)[n].is_public)
+#define TYPE_FN_FIELD_STATIC(thisfn, n) ((thisfn)[n].is_static)
+#define TYPE_FN_FIELD_FINAL(thisfn, n) ((thisfn)[n].is_final)
+#define TYPE_FN_FIELD_SYNCHRONIZED(thisfn, n) ((thisfn)[n].is_synchronized)
+#define TYPE_FN_FIELD_NATIVE(thisfn, n) ((thisfn)[n].is_native)
+#define TYPE_FN_FIELD_ABSTRACT(thisfn, n) ((thisfn)[n].is_abstract)
+#define TYPE_FN_FIELD_STUB(thisfn, n) ((thisfn)[n].is_stub)
+#define TYPE_FN_FIELD_INLINED(thisfn, n) ((thisfn)[n].is_inlined)
+#define TYPE_FN_FIELD_FCONTEXT(thisfn, n) ((thisfn)[n].fcontext)
+#define TYPE_FN_FIELD_VOFFSET(thisfn, n) ((thisfn)[n].voffset-2)
+#define TYPE_FN_FIELD_VIRTUAL_P(thisfn, n) ((thisfn)[n].voffset > 1)
+#define TYPE_FN_FIELD_STATIC_P(thisfn, n) ((thisfn)[n].voffset == VOFFSET_STATIC)
+
+#define TYPE_RUNTIME_PTR(thistype) (TYPE_CPLUS_SPECIFIC(thistype)->runtime_ptr)
+#define TYPE_VTABLE(thistype) (TYPE_RUNTIME_PTR(thistype)->has_vtable)
+#define TYPE_HAS_VTABLE(thistype) (TYPE_RUNTIME_PTR(thistype) && TYPE_VTABLE(thistype))
+#define TYPE_PRIMARY_BASE(thistype) (TYPE_RUNTIME_PTR(thistype)->primary_base)
+#define TYPE_VIRTUAL_BASE_LIST(thistype) (TYPE_RUNTIME_PTR(thistype)->virtual_base_list)
+  
+#define TYPE_LOCALTYPE_PTR(thistype) (TYPE_CPLUS_SPECIFIC(thistype)->localtype_ptr)
+#define TYPE_LOCALTYPE_FILE(thistype) (TYPE_CPLUS_SPECIFIC(thistype)->localtype_ptr->file)
+#define TYPE_LOCALTYPE_LINE(thistype) (TYPE_CPLUS_SPECIFIC(thistype)->localtype_ptr->line)
+              
+#define TYPE_IS_OPAQUE(thistype) (((TYPE_CODE (thistype) == TYPE_CODE_STRUCT) ||        \
+                                   (TYPE_CODE (thistype) == TYPE_CODE_UNION))        && \
+                                  (TYPE_NFIELDS (thistype) == 0)                     && \
+                                  (TYPE_CPLUS_SPECIFIC (thistype) && (TYPE_NFN_FIELDS (thistype) == 0)))
+       
+         
+                        
+/* Implicit sizes */
+extern struct type *builtin_type_void;
+extern struct type *builtin_type_char;
+extern struct type *builtin_type_short;
+extern struct type *builtin_type_int;
+extern struct type *builtin_type_long;
+extern struct type *builtin_type_signed_char;
+extern struct type *builtin_type_unsigned_char;
+extern struct type *builtin_type_unsigned_short;
+extern struct type *builtin_type_unsigned_int;
+extern struct type *builtin_type_unsigned_long;
+extern struct type *builtin_type_float;
+extern struct type *builtin_type_double;
+extern struct type *builtin_type_long_double;
+extern struct type *builtin_type_complex;
+extern struct type *builtin_type_double_complex;
+extern struct type *builtin_type_string;
+extern struct type *builtin_type_bool;
+
+/* Explicit sizes - see <intypes.h> for naming schema */
+extern struct type *builtin_type_int8;
+extern struct type *builtin_type_uint8;
+extern struct type *builtin_type_int16;
+extern struct type *builtin_type_uint16;
+extern struct type *builtin_type_int32;
+extern struct type *builtin_type_uint32;
+extern struct type *builtin_type_int64;
+extern struct type *builtin_type_uint64;
+
+/* This type represents a type that was unrecognized in symbol
+   read-in.  */
+
+extern struct type *builtin_type_error;
+
+extern struct type *builtin_type_long_long;
+extern struct type *builtin_type_unsigned_long_long;
+
+/* Modula-2 types */
+
+extern struct type *builtin_type_m2_char;
+extern struct type *builtin_type_m2_int;
+extern struct type *builtin_type_m2_card;
+extern struct type *builtin_type_m2_real;
+extern struct type *builtin_type_m2_bool;
+
+/* Chill types */
+
+extern struct type *builtin_type_chill_bool;
+extern struct type *builtin_type_chill_char;
+extern struct type *builtin_type_chill_long;
+extern struct type *builtin_type_chill_ulong;
+extern struct type *builtin_type_chill_real;
+
+/* Fortran (F77) types */
+
+extern struct type *builtin_type_f_character;
+extern struct type *builtin_type_f_integer;
+extern struct type *builtin_type_f_logical;
+extern struct type *builtin_type_f_logical_s1;
+extern struct type *builtin_type_f_logical_s2;
+extern struct type *builtin_type_f_integer; 
+extern struct type *builtin_type_f_integer_s2;
+extern struct type *builtin_type_f_real;
+extern struct type *builtin_type_f_real_s8;
+extern struct type *builtin_type_f_real_s16;
+extern struct type *builtin_type_f_complex_s8;
+extern struct type *builtin_type_f_complex_s16;
+extern struct type *builtin_type_f_complex_s32;
+extern struct type *builtin_type_f_void;
+
+/* RTTI for C++ */
+/* extern struct type *builtin_type_cxx_typeinfo; */ 
+
+/* Maximum and minimum values of built-in types */
+
+#define	MAX_OF_TYPE(t)	\
+   TYPE_UNSIGNED(t) ? UMAX_OF_SIZE(TYPE_LENGTH(t)) \
+    : MAX_OF_SIZE(TYPE_LENGTH(t))
+
+#define MIN_OF_TYPE(t)	\
+   TYPE_UNSIGNED(t) ? UMIN_OF_SIZE(TYPE_LENGTH(t)) \
+    : MIN_OF_SIZE(TYPE_LENGTH(t))
+
+/* Allocate space for storing data associated with a particular type.
+   We ensure that the space is allocated using the same mechanism that
+   was used to allocate the space for the type structure itself.  I.E.
+   if the type is on an objfile's type_obstack, then the space for data
+   associated with that type will also be allocated on the type_obstack.
+   If the type is not associated with any particular objfile (such as
+   builtin types), then the data space will be allocated with xmalloc,
+   the same as for the type structure. */
+
+#define TYPE_ALLOC(t,size)  \
+   (TYPE_OBJFILE (t) != NULL  \
+    ? obstack_alloc (&TYPE_OBJFILE (t) -> type_obstack, size) \
+    : xmalloc (size))
+
+extern struct type *
+alloc_type PARAMS ((struct objfile *));
+
+extern struct type *
+init_type PARAMS ((enum type_code, int, int, char *, struct objfile *));
+
+extern struct type *
+lookup_reference_type PARAMS ((struct type *));
+
+extern struct type *
+make_reference_type PARAMS ((struct type *, struct type **));
+
+extern struct type *
+make_cv_type PARAMS ((int, int, struct type *, struct type **));
+
+extern struct type *
+lookup_member_type PARAMS ((struct type *, struct type *));
+
+extern void
+smash_to_method_type PARAMS ((struct type *, struct type *, struct type *,
+			      struct type **));
+
+extern void
+smash_to_member_type PARAMS ((struct type *, struct type *, struct type *));
+
+extern struct type *
+allocate_stub_method PARAMS ((struct type *));
+
+extern char *
+type_name_no_tag PARAMS ((const struct type *));
+
+extern struct type *
+lookup_struct_elt_type PARAMS ((struct type *, char *, int));
+
+extern struct type *
+make_pointer_type PARAMS ((struct type *, struct type **));
+
+extern struct type *
+lookup_pointer_type PARAMS ((struct type *));
+
+extern struct type *
+make_function_type PARAMS ((struct type *, struct type **));
+
+extern struct type *
+lookup_function_type PARAMS ((struct type *));
+
+extern struct type *
+create_range_type PARAMS ((struct type *, struct type *, int, int));
+
+extern struct type *
+create_array_type PARAMS ((struct type *, struct type *, struct type *));
+
+extern struct type *
+create_string_type PARAMS ((struct type *, struct type *));
+
+extern struct type *create_set_type PARAMS ((struct type *, struct type *));
+
+extern int chill_varying_type PARAMS ((struct type*));
+
+extern struct type *
+lookup_unsigned_typename PARAMS ((char *));
+
+extern struct type *
+lookup_signed_typename PARAMS ((char *));
+
+extern struct type *
+check_typedef PARAMS ((struct type *));
+
+#define CHECK_TYPEDEF(TYPE) (TYPE) = check_typedef (TYPE)
+
+extern void
+check_stub_method PARAMS ((struct type *, int, int));
+
+extern struct type *
+lookup_primitive_typename PARAMS ((char *));
+
+extern char *
+gdb_mangle_name PARAMS ((struct type *, int, int));
+
+extern struct type *
+builtin_type PARAMS ((char **));
+
+extern struct type *
+lookup_typename PARAMS ((char *, struct block *, int));
+
+extern struct type *
+lookup_template_type PARAMS ((char *, struct type *, struct block *));
+
+extern struct type *
+lookup_fundamental_type PARAMS ((struct objfile *, int));
+
+extern void
+fill_in_vptr_fieldno PARAMS ((struct type *));
+
+extern int get_destructor_fn_field PARAMS ((struct type *, int *, int *));
+
+extern int get_discrete_bounds PARAMS ((struct type*, LONGEST*, LONGEST*));
+
+extern int
+is_ancestor PARAMS ((struct type *, struct type *));
+
+extern int
+has_vtable PARAMS ((struct type *));
+
+extern struct type *
+primary_base_class PARAMS ((struct type *));
+
+extern struct type **
+virtual_base_list PARAMS ((struct type *));
+
+extern int
+virtual_base_list_length PARAMS ((struct type *));
+extern int
+virtual_base_list_length_skip_primaries PARAMS ((struct type *));
+
+extern int
+virtual_base_index PARAMS ((struct type *, struct type *));
+extern int
+virtual_base_index_skip_primaries PARAMS ((struct type *, struct type *));
+
+
+extern int
+class_index_in_primary_list PARAMS ((struct type *));
+
+extern int
+count_virtual_fns PARAMS ((struct type*));
+
+/* Constants for HP/Taligent ANSI C++ runtime model */
+
+/* Where virtual function entries begin in the
+ * virtual table, in the non-RRBC vtable format.
+ * First 4 are the metavtable pointer, top offset,
+ * typeinfo pointer, and dup base info pointer */
+#define HP_ACC_VFUNC_START        4
+
+/* (Negative) Offset where virtual base offset entries begin 
+ * in the virtual table. Skips over metavtable pointer and
+ * the self-offset entry. 
+ * NOTE: NEGATE THIS BEFORE USING! The virtual base offsets
+ * appear before the address point of the vtable (the slot
+ * pointed to by the object's vtable pointer), i.e. at lower
+ * addresses than the vtable pointer. */
+#define HP_ACC_VBASE_START        2
+
+/* (Positive) Offset where the pointer to the typeinfo
+ * object is present in the virtual table */
+#define HP_ACC_TYPEINFO_OFFSET    2
+
+/* (Positive) Offset where the ``top offset'' entry of
+ * the virtual table is */
+#define HP_ACC_TOP_OFFSET_OFFSET  1
+
+/* Overload resolution */
+
+#define LENGTH_MATCH(bv) ((bv)->rank[0])
+
+/* Badness if parameter list length doesn't match arg list length */ 
+#define LENGTH_MISMATCH_BADNESS      100
+/* Dummy badness value for nonexistent parameter positions */ 
+#define TOO_FEW_PARAMS_BADNESS       100
+/* Badness if no conversion among types */
+#define INCOMPATIBLE_TYPE_BADNESS    100
+/* Badness of coercing large integer to smaller size */
+#define INTEGER_COERCION_BADNESS     100
+/* Badness of coercing large floating type to smaller size */
+#define FLOAT_COERCION_BADNESS       100
+
+/* Badness of integral promotion */
+#define INTEGER_PROMOTION_BADNESS      1
+/* Badness of floating promotion */
+#define FLOAT_PROMOTION_BADNESS        1
+/* Badness of integral conversion */
+#define INTEGER_CONVERSION_BADNESS     2
+/* Badness of floating conversion */
+#define FLOAT_CONVERSION_BADNESS       2
+/* Badness of integer<->floating conversions */
+#define INT_FLOAT_CONVERSION_BADNESS   2
+/* Badness of converting to a boolean */
+#define BOOLEAN_CONVERSION_BADNESS     2
+/* Badness of pointer conversion */
+#define POINTER_CONVERSION_BADNESS     2
+/* Badness of conversion of pointer to void pointer */
+#define VOID_PTR_CONVERSION_BADNESS    2
+/* Badness of convering derived to base class */
+#define BASE_CONVERSION_BADNESS        2
+
+/* Non-standard conversions allowed by the debugger */
+/* Converting a pointer to an int is usually OK */
+#define NS_POINTER_CONVERSION_BADNESS 10
+
+
+extern int
+compare_badness PARAMS ((struct badness_vector *, struct badness_vector *));
+
+extern struct badness_vector *
+rank_function PARAMS ((struct type **, int, struct type **, int));
+
+extern int
+rank_one_type PARAMS ((struct type *, struct type *));
+
+
+#if MAINTENANCE_CMDS
+extern void recursive_dump_type PARAMS ((struct type *, int));
+#endif
+
+/* printcmd.c */
+
+extern void
+print_scalar_formatted PARAMS ((char *, struct type *, int, int, GDB_FILE *));
+
+extern int can_dereference PARAMS ((struct type *));
+
+#if MAINTENANCE_CMDS
+extern void maintenance_print_type PARAMS ((char *, int));
+#endif
+
+/* typeprint.c */
+
+extern void print_type_scalar PARAMS ((struct type *, LONGEST, GDB_FILE *));
+
+#endif	/* GDBTYPES_H */
diff --git a/gdb/gnu-nat.c b/gdb/gnu-nat.c
new file mode 100644
index 0000000..156d981
--- /dev/null
+++ b/gdb/gnu-nat.c
@@ -0,0 +1,3201 @@
+/* Interface GDB to the GNU Hurd
+   Copyright (C) 1992, 1995, 1996, 1997 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   Written by Miles Bader <miles@gnu.ai.mit.edu>
+
+   Some code and ideas from m3-nat.c by Jukka Virtanen <jtv@hut.fi>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#include <stdio.h>
+#include <errno.h>
+#include <signal.h>
+#include <assert.h>
+#include <setjmp.h>
+#include <limits.h>
+#include <sys/ptrace.h>
+
+/* We include this because we don't need the access macros and they conflict
+   with gdb's definitions (ick).  This is very non standard!  */
+#include <waitflags.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/notify.h>
+#include <mach_error.h>
+#include <mach/exception.h>
+#include <mach/vm_attributes.h>
+
+#include <hurd/process.h>
+#include <hurd/process_request.h>
+#include <hurd/msg.h>
+#include <hurd/msg_request.h>
+#include <hurd/signal.h>
+#include <hurd/interrupt.h>
+#include <hurd/sigpreempt.h>
+
+#include <portinfo.h>
+
+#include "defs.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+#include "language.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+
+#include "gnu-nat.h"
+
+#include "exc_request_S.h"
+#include "notify_S.h"
+#include "process_reply_S.h"
+#include "msg_reply_S.h"
+#include "exc_request_U.h"
+#include "msg_U.h"
+
+static process_t proc_server = MACH_PORT_NULL;
+
+/* If we've sent a proc_wait_request to the proc server, the pid of the
+   process we asked about.  We can only ever have one outstanding.  */
+int proc_wait_pid = 0;
+
+/* The number of wait requests we've sent, and expect replies from.  */
+int proc_waits_pending = 0;
+
+int gnu_debug_flag = 0;
+
+/* Forward decls */
+
+extern struct target_ops gnu_ops;
+extern char *strerror();
+
+int inf_update_procs (struct inf *inf);
+struct inf *make_inf ();
+void inf_clear_wait (struct inf *inf);
+void inf_cleanup (struct inf *inf);
+void inf_startup (struct inf *inf, int pid);
+int inf_update_suspends (struct inf *inf);
+void inf_set_pid (struct inf *inf, pid_t pid);
+void inf_validate_procs (struct inf *inf);
+void inf_steal_exc_ports (struct inf *inf);
+void inf_restore_exc_ports (struct inf *inf);
+struct proc *inf_tid_to_proc (struct inf *inf, int tid);
+inline void inf_set_threads_resume_sc (struct inf *inf, 
+				       struct proc *run_thread, 
+				       int run_others);
+inline int inf_set_threads_resume_sc_for_signal_thread (struct inf *inf);
+inline void inf_suspend (struct inf *inf);
+inline void inf_resume (struct inf *inf);
+void inf_set_step_thread (struct inf *inf, struct proc *proc);
+void inf_detach (struct inf *inf);
+void inf_attach (struct inf *inf, int pid);
+void inf_signal (struct inf *inf, enum target_signal sig);
+
+#define inf_debug(_inf, msg, args...) \
+  do { struct inf *__inf = (_inf); \
+       debug ("{inf %d %p}: " msg, __inf->pid, __inf , ##args); } while (0)
+
+void proc_abort (struct proc *proc, int force);
+thread_state_t proc_get_state (struct proc *proc, int force);
+struct proc *make_proc (struct inf *inf, mach_port_t port, int tid);
+struct proc *_proc_free (struct proc *proc);
+int proc_update_sc (struct proc *proc);
+error_t proc_get_exception_port (struct proc *proc, mach_port_t *port);
+error_t proc_set_exception_port (struct proc *proc, mach_port_t port);
+static mach_port_t _proc_get_exc_port (struct proc *proc);
+void proc_steal_exc_port (struct proc *proc, mach_port_t exc_port);
+void proc_restore_exc_port (struct proc *proc);
+int proc_trace (struct proc *proc, int set);
+char *proc_string (struct proc *proc);
+
+/* Evaluate RPC_EXPR in a scope with the variables MSGPORT and REFPORT bound
+   to INF's msg port and task port respectively.  If it has no msg port,
+   EIEIO is returned.  INF must refer to a running process!  */
+#define INF_MSGPORT_RPC(inf, rpc_expr) \
+  HURD_MSGPORT_RPC (proc_getmsgport (proc_server, inf->pid, &msgport), \
+		    (refport = inf->task->port, 0), 0, \
+		    msgport ? (rpc_expr) : EIEIO)
+
+/* Like INF_MSGPORT_RPC, but will also resume the signal thread to ensure
+   there's someone around to deal with the RPC (and resuspend things
+   afterwards).  This effects INF's threads' resume_sc count.  */
+#define INF_RESUME_MSGPORT_RPC(inf, rpc_expr) \
+  (inf_set_threads_resume_sc_for_signal_thread (inf) \
+   ? ({ error_t __e; \
+	inf_resume (inf); \
+	__e = INF_MSGPORT_RPC (inf, rpc_expr); \
+	inf_suspend (inf); \
+	__e; }) \
+   : EIEIO)
+
+#define MIG_SERVER_DIED EMIG_SERVER_DIED /* XXX */
+
+/* The state passed by an exception message.  */
+struct exc_state
+{
+  int exception;		/* The exception code */
+  int code, subcode;
+  mach_port_t handler;		/* The real exception port to handle this. */
+  mach_port_t reply;		/* The reply port from the exception call. */
+};
+
+/* The results of the last wait an inf did. */
+struct inf_wait
+{
+  struct target_waitstatus status; /* The status returned to gdb.  */
+  struct exc_state exc;		/* The exception that caused us to return. */
+  struct proc *thread;		/* The thread in question.  */
+  int suppress;			/* Something trivial happened.  */
+};
+
+/* The state of an inferior.  */
+struct inf
+{
+  /* Fields describing the current inferior.  */
+
+  struct proc *task;		/* The mach task.   */
+  struct proc *threads;		/* A linked list of all threads in TASK.  */
+
+  /* True if THREADS needn't be validated by querying the task.  We assume that
+     we and the task in question are the only ones frobbing the thread list,
+     so as long as we don't let any code run, we don't have to worry about
+     THREADS changing.  */
+  int threads_up_to_date;
+
+  pid_t pid;			/* The real system PID. */
+
+  struct inf_wait wait;		/* What to return from target_wait.  */
+
+  /* One thread proc in INF may be in `single-stepping mode'.  This is it.  */
+  struct proc *step_thread;
+
+  /* The thread we think is the signal thread.  */
+  struct proc *signal_thread;
+
+  mach_port_t event_port;	/* Where we receive various msgs.  */
+
+  /* True if we think at least one thread in the inferior could currently be
+     running.  */
+  int running : 1;
+
+  /* True if the process has stopped (in the proc server sense).  Note that
+     since a proc server `stop' leaves the signal thread running, the inf can
+     be RUNNING && STOPPED...  */
+  int stopped : 1;
+
+  /* True if the inferior is traced.  */
+  int traced : 1;
+
+  /* True if we shouldn't try waiting for the inferior, usually because we
+     can't for some reason.  */
+  int no_wait : 1;
+
+  /* When starting a new inferior, we don't try to validate threads until all
+     the proper execs have been done.  This is a count of how many execs we
+     expect to happen.  */
+  unsigned pending_execs;
+
+  /* Fields describing global state */
+
+  /* The task suspend count used when gdb has control.  This is normally 1 to
+     make things easier for us, but sometimes (like when attaching to vital
+     system servers) it may be desirable to let the task continue to run
+     (pausing individual threads as necessary).  */
+  int pause_sc;
+
+  /* The task suspend count left when detaching from a task.  */
+  int detach_sc;
+
+  /* The initial values used for the run_sc and pause_sc of newly discovered
+     threads -- see the definition of those fields in struct proc.  */
+  int default_thread_run_sc;
+  int default_thread_pause_sc;
+  int default_thread_detach_sc;
+
+  /* True if the process should be traced when started/attached.  Newly
+     started processes *must* be traced at first to exec them properly, but
+     if this is false, tracing is turned off as soon it has done so.  */
+  int want_signals;
+
+  /* True if exceptions from the inferior process should be trapped.  This
+     must be on to use breakpoints.  */
+  int want_exceptions;
+};
+
+
+int __proc_pid (struct proc *proc)
+{
+  return proc->inf->pid;
+}
+
+/* Update PROC's real suspend count to match it's desired one.  Returns true
+   if we think PROC is now in a runnable state.  */
+int
+proc_update_sc (struct proc *proc)
+{
+  int running;
+  int err =  0;
+  int delta = proc->sc - proc->cur_sc;
+
+  if (delta)
+    proc_debug (proc, "sc: %d --> %d", proc->cur_sc, proc->sc);
+
+  if (proc->sc == 0 && proc->state_changed)
+    /* Since PROC may start running, we must write back any state changes. */
+    {
+      assert (proc_is_thread (proc));
+      proc_debug (proc, "storing back changed thread state");
+      err = thread_set_state (proc->port, THREAD_STATE_FLAVOR,
+			      (thread_state_t)&proc->state, THREAD_STATE_SIZE);
+      if (! err)
+	proc->state_changed = 0;
+    }
+
+  if (delta > 0)
+    while (delta-- > 0 && !err)
+      if (proc_is_task (proc))
+	err = task_suspend (proc->port);
+      else
+	err = thread_suspend (proc->port);
+  else
+    while (delta++ < 0 && !err)
+      if (proc_is_task (proc))
+	err = task_resume (proc->port);
+      else
+	err = thread_resume (proc->port);
+
+  if (! err)
+    proc->cur_sc = proc->sc;
+
+  /* If we got an error, then the task/thread has disappeared.  */
+  running = !err && proc->sc == 0;
+
+  proc_debug (proc, "is %s", err ? "dead" : running ? "running" : "suspended");
+  if (err)
+    proc_debug (proc, "err = %s", strerror (err));
+
+  if (running)
+    {
+      proc->aborted = 0;
+      proc->state_valid = proc->state_changed = 0;
+      proc->fetched_regs = 0;
+    }
+
+  return running;
+}
+
+/* Thread_abort is called on PROC if needed.  PROC must be a thread proc.
+   If PROC is deemed `precious', then nothing is done unless FORCE is true.
+   In particular, a thread is precious if it's running (in which case forcing
+   it includes suspending it first), or if it has an exception pending.  */
+void
+proc_abort (struct proc *proc, int force)
+{
+  assert (proc_is_thread (proc));
+
+  if (! proc->aborted)
+    {
+      struct inf *inf = proc->inf;
+      int running = (proc->cur_sc == 0 && inf->task->cur_sc == 0);
+
+      if (running && force)
+	{
+	  proc->sc = 1;
+	  inf_update_suspends (proc->inf);
+	  running = 0;
+	  warning ("Stopped %s.", proc_string (proc));
+	}
+      else if (proc == inf->wait.thread && inf->wait.exc.reply && !force)
+	/* An exception is pending on PROC, which don't mess with.  */
+	running = 1;
+
+      if (! running)
+	/* We only abort the thread if it's not actually running.  */
+	{
+	  thread_abort (proc->port);
+	  proc_debug (proc, "aborted");
+	  proc->aborted = 1;
+	}
+      else
+	proc_debug (proc, "not aborting");
+    }
+}
+
+/* Make sure that the state field in PROC is up to date, and return a pointer
+   to it, or 0 if something is wrong.  If WILL_MODIFY is true, makes sure
+   that the thread is stopped and aborted first, and sets the state_changed
+   field in PROC to true.  */
+thread_state_t
+proc_get_state (struct proc *proc, int will_modify)
+{
+  int was_aborted = proc->aborted;
+
+  proc_debug (proc, "updating state info%s",
+	      will_modify ? " (with intention to modify)" : "");
+
+  proc_abort (proc, will_modify);
+
+  if (! was_aborted && proc->aborted)
+    /* PROC's state may have changed since we last fetched it.  */
+    proc->state_valid = 0;
+
+  if (! proc->state_valid)
+    {
+      mach_msg_type_number_t state_size = THREAD_STATE_SIZE;
+      error_t err =
+	thread_get_state (proc->port, THREAD_STATE_FLAVOR,
+			  (thread_state_t)&proc->state, &state_size);
+      proc_debug (proc, "getting thread state");
+      proc->state_valid = !err;
+    }
+
+  if (proc->state_valid)
+    {
+      if (will_modify)
+	proc->state_changed = 1;
+      return (thread_state_t)&proc->state;
+    }
+  else
+    return 0;
+}
+
+/* Set PORT to PROC's exception port.  */
+error_t
+proc_get_exception_port (struct proc *proc, mach_port_t *port)
+{
+  if (proc_is_task (proc))
+    return task_get_exception_port (proc->port, port);
+  else
+    return thread_get_exception_port (proc->port, port);
+}
+
+/* Set PROC's exception port to PORT.  */
+error_t
+proc_set_exception_port (struct proc *proc, mach_port_t port)
+{
+  proc_debug (proc, "setting exception port: %d", port);
+  if (proc_is_task (proc))
+    return task_set_exception_port (proc->port, port);
+  else
+    return thread_set_exception_port (proc->port, port);
+}
+
+/* Get PROC's exception port, cleaning up a bit if proc has died.  */
+static mach_port_t
+_proc_get_exc_port (struct proc *proc)
+{
+  mach_port_t exc_port;
+  error_t err = proc_get_exception_port (proc, &exc_port);
+
+  if (err)
+    /* PROC must be dead.  */
+    {
+      if (proc->exc_port)
+	mach_port_deallocate (mach_task_self (), proc->exc_port);
+      proc->exc_port = MACH_PORT_NULL;
+      if (proc->saved_exc_port)
+	mach_port_deallocate (mach_task_self (), proc->saved_exc_port);
+      proc->saved_exc_port = MACH_PORT_NULL;
+    }
+
+  return exc_port;
+}
+
+/* Replace PROC's exception port with EXC_PORT, unless it's already been
+   done.  Stash away any existing exception port so we can restore it later. */
+void
+proc_steal_exc_port (struct proc *proc, mach_port_t exc_port)
+{
+  mach_port_t cur_exc_port = _proc_get_exc_port (proc);
+
+  if (cur_exc_port)
+    {
+      error_t err;
+
+      proc_debug (proc, "inserting exception port: %d", exc_port);
+
+      if (cur_exc_port != exc_port)
+	/* Put in our exception port.  */
+	err = proc_set_exception_port (proc, exc_port);
+
+      if (err || cur_exc_port == proc->exc_port)
+	/* We previously set the exception port, and it's still set.  So we
+	   just keep the old saved port which is what the proc set.  */
+	{
+	  if (cur_exc_port)
+	    mach_port_deallocate (mach_task_self (), cur_exc_port);
+	}
+      else
+	/* Keep a copy of PROC's old exception port so it can be restored. */
+	{
+	  if (proc->saved_exc_port)
+	    mach_port_deallocate (mach_task_self (), proc->saved_exc_port);
+	  proc->saved_exc_port = cur_exc_port;
+	}
+
+      proc_debug (proc, "saved exception port: %d", proc->saved_exc_port);
+
+      if (!err)
+	proc->exc_port = exc_port;
+      else
+	warning ("Error setting exception port for %s: %s",
+		 proc_string (proc), strerror (err));
+    }
+}
+
+/* If we previously replaced PROC's exception port, put back what we
+   found there at the time, unless *our* exception port has since been
+   overwritten, in which case who knows what's going on.  */
+void
+proc_restore_exc_port (struct proc *proc)
+{
+  mach_port_t cur_exc_port = _proc_get_exc_port (proc);
+
+  if (cur_exc_port)
+    {
+      error_t err = 0;
+
+      proc_debug (proc, "restoring real exception port");
+
+      if (proc->exc_port == cur_exc_port)
+	/* Our's is still there.  */
+	err = proc_set_exception_port (proc, proc->saved_exc_port);
+
+      if (proc->saved_exc_port)
+	mach_port_deallocate (mach_task_self (), proc->saved_exc_port);
+      proc->saved_exc_port = MACH_PORT_NULL;
+
+      if (!err)
+	proc->exc_port = MACH_PORT_NULL;
+      else
+	warning ("Error setting exception port for %s: %s",
+		 proc_string (proc), strerror (err));
+    }
+}
+
+/* Turns hardware tracing in PROC on or off when SET is true or false,
+   respectively.  Returns true on success.  */
+int
+proc_trace (struct proc *proc, int set)
+{
+  thread_state_t state = proc_get_state (proc, 1);
+
+  if (! state)
+    return 0;			/* the thread must be dead.  */
+
+  proc_debug (proc, "tracing %s", set ? "on" : "off");
+  
+  if (set)
+    {
+      /* XXX We don't get the exception unless the thread has its own
+	 exception port???? */
+      if (proc->exc_port == MACH_PORT_NULL)
+	proc_steal_exc_port (proc, proc->inf->event_port);
+      THREAD_STATE_SET_TRACED (state);
+    }
+  else
+    THREAD_STATE_CLEAR_TRACED (state);
+
+  return 1;
+}
+
+/* A variable from which to assign new TIDs.  */
+static int next_thread_id = 1;
+
+/* Returns a new proc structure with the given fields.  Also adds a
+   notification for PORT becoming dead to be sent to INF's notify port.  */
+struct proc *
+make_proc (struct inf *inf, mach_port_t port, int tid)
+{
+  error_t err;
+  mach_port_t prev_port = MACH_PORT_NULL;
+  struct proc *proc = malloc (sizeof (struct proc));
+
+  proc->port = port;
+  proc->tid = tid;
+  proc->inf = inf;
+  proc->next = 0;
+  proc->saved_exc_port = MACH_PORT_NULL;
+  proc->exc_port = MACH_PORT_NULL;
+
+  proc->sc = 0;
+  proc->cur_sc = 0;
+
+  /* Note that these are all the values for threads; the task simply uses the
+     corresponding field in INF directly.  */
+  proc->run_sc = inf->default_thread_run_sc;
+  proc->pause_sc = inf->default_thread_pause_sc;
+  proc->detach_sc = inf->default_thread_detach_sc;
+  proc->resume_sc = proc->run_sc;
+
+  proc->aborted = 0;
+  proc->dead = 0;
+  proc->state_valid = 0;
+  proc->state_changed = 0;
+
+  proc_debug (proc, "is new");
+
+  /* Get notified when things die.  */
+  err =
+    mach_port_request_notification (mach_task_self(), port,
+				    MACH_NOTIFY_DEAD_NAME, 1,
+				    inf->event_port,
+				    MACH_MSG_TYPE_MAKE_SEND_ONCE,
+				    &prev_port);
+  if (err)
+    warning ("Couldn't request notification for port %d: %s",
+	     port, strerror (err));
+  else
+    {
+      proc_debug (proc, "notifications to: %d", inf->event_port);
+      if (prev_port != MACH_PORT_NULL)
+	mach_port_deallocate (mach_task_self (), prev_port);
+    }
+
+  if (inf->want_exceptions)
+    if (proc_is_task (proc))
+      /* Make the task exception port point to us.  */
+      proc_steal_exc_port (proc, inf->event_port);
+    else
+      /* Just clear thread exception ports -- they default to the task one.  */
+      proc_steal_exc_port (proc, MACH_PORT_NULL);
+
+  return proc;
+}
+
+/* Frees PROC and any resources it uses, and returns the value of PROC's 
+   next field.  */
+struct proc *
+_proc_free (struct proc *proc)
+{
+  struct inf *inf = proc->inf;
+  struct proc *next = proc->next;
+
+  proc_debug (proc, "freeing...");
+
+  if (proc == inf->step_thread)
+    /* Turn off single stepping.  */
+    inf_set_step_thread (inf, 0);
+  if (proc == inf->wait.thread)
+    inf_clear_wait (inf);
+  if (proc == inf->signal_thread)
+    inf->signal_thread = 0;
+
+  if (proc->port != MACH_PORT_NULL)
+    {
+      if (proc->exc_port != MACH_PORT_NULL)
+	/* Restore the original exception port.  */
+	proc_restore_exc_port (proc);
+      if (proc->cur_sc != 0)
+	/* Resume the thread/task.  */
+	{
+	  proc->sc = 0;
+	  proc_update_sc (proc);
+	}
+      mach_port_deallocate (mach_task_self (), proc->port);
+    }
+
+  free (proc);
+  return next;
+}
+
+struct inf *make_inf ()
+{
+  struct inf *inf = malloc (sizeof (struct inf));
+
+  if (!inf)
+    return 0;
+
+  inf->task = 0;
+  inf->threads = 0;
+  inf->threads_up_to_date = 0;
+  inf->pid = 0;
+  inf->wait.status.kind = TARGET_WAITKIND_SPURIOUS;
+  inf->wait.thread = 0;
+  inf->wait.exc.handler = MACH_PORT_NULL;
+  inf->wait.exc.reply = MACH_PORT_NULL;
+  inf->step_thread = 0;
+  inf->signal_thread = 0;
+  inf->event_port = MACH_PORT_NULL;
+  inf->stopped = 0;
+  inf->running = 0;
+  inf->traced = 0;
+  inf->no_wait = 0;
+  inf->pending_execs = 0;
+  inf->pause_sc = 1;
+  inf->detach_sc = 0;
+  inf->default_thread_run_sc = 0;
+  inf->default_thread_pause_sc = 0;
+  inf->default_thread_detach_sc = 0;
+  inf->want_signals = 1;	/* By default */
+  inf->want_exceptions = 1;	/* By default */
+
+  return inf;
+}
+
+/* clear INF's target wait status.  */
+void
+inf_clear_wait (struct inf *inf)
+{
+  inf_debug (inf, "clearing wait");
+  inf->wait.status.kind = TARGET_WAITKIND_SPURIOUS;
+  inf->wait.thread = 0;
+  inf->wait.suppress = 0;
+  if (inf->wait.exc.handler != MACH_PORT_NULL)
+    {
+      mach_port_deallocate (mach_task_self (), inf->wait.exc.handler);
+      inf->wait.exc.handler = MACH_PORT_NULL;
+    }
+  if (inf->wait.exc.reply != MACH_PORT_NULL)
+    {
+      mach_port_deallocate (mach_task_self (), inf->wait.exc.reply);
+      inf->wait.exc.reply = MACH_PORT_NULL;
+    }
+}
+
+void
+inf_cleanup (struct inf *inf)
+{
+  inf_debug (inf, "cleanup");
+
+  inf_clear_wait (inf);
+
+  inf_set_pid (inf, -1);
+  inf->pid = 0;
+  inf->traced = 0;
+  inf->no_wait = 0;
+  inf->stopped = 0;
+  inf->running = 0;
+  inf->pending_execs = 0;
+
+  if (inf->event_port)
+    {
+      mach_port_destroy (mach_task_self (), inf->event_port);
+      inf->event_port = MACH_PORT_NULL;
+    }
+}
+
+void
+inf_startup (struct inf *inf, int pid)
+{
+  error_t err;
+
+  inf_debug (inf, "startup: pid = %d", pid);
+
+  inf_cleanup (inf);
+
+  /* Make the port on which we receive all events.  */
+  err = mach_port_allocate (mach_task_self (),
+			    MACH_PORT_RIGHT_RECEIVE, &inf->event_port);
+  if (err)
+    error ("Error allocating event port: %s", strerror (err));
+
+  /* Make a send right for it, so we can easily copy it for other people.  */
+  mach_port_insert_right (mach_task_self (), inf->event_port,
+			  inf->event_port, MACH_MSG_TYPE_MAKE_SEND);
+  inf_set_pid (inf, pid);
+}
+
+/* close current process, if any, and attach INF to process PORT */
+void 
+inf_set_pid (struct inf *inf, pid_t pid)
+{
+  task_t task_port;
+  struct proc *task = inf->task;
+
+  inf_debug (inf, "setting pid: %d", pid);
+
+  if (pid < 0)
+    task_port = MACH_PORT_NULL;
+  else
+    {
+      error_t err = proc_pid2task (proc_server, pid, &task_port);
+      if (err)
+	error ("Error getting task for pid %d: %s", pid, strerror (err));
+    }
+
+  inf_debug (inf, "setting task: %d", task_port);
+
+  if (inf->pause_sc)
+    task_suspend (task_port);
+
+  if (task && task->port != task_port)
+    {
+      inf->task = 0;
+      inf_validate_procs (inf);	/* Trash all the threads. */
+      _proc_free (task);	/* And the task. */
+    }
+
+  if (task_port != MACH_PORT_NULL)
+    {
+      inf->task = make_proc (inf, task_port, PROC_TID_TASK);
+      inf->threads_up_to_date = 0;
+    }
+
+  if (inf->task)
+    {
+      inf->pid = pid;
+      if (inf->pause_sc)
+	inf->task->sc = inf->task->cur_sc = 1; /* Reflect task_suspend above */
+    }
+  else
+    inf->pid = -1;
+}
+
+/* Validates INF's stopped field from the actual proc server state.  */
+static void
+inf_validate_stopped (struct inf *inf)
+{
+  char *noise;
+  mach_msg_type_number_t noise_len = 0;
+  struct procinfo *pi;
+  mach_msg_type_number_t pi_len = 0;
+  int info_flags = 0;
+  error_t err =
+    proc_getprocinfo (proc_server, inf->pid, &info_flags,
+		      (procinfo_t *)&pi, &pi_len, &noise, &noise_len);
+
+  if (! err)
+    {
+      inf->stopped = !!(pi->state & PI_STOPPED);
+      vm_deallocate (mach_task_self (), (vm_address_t)pi, pi_len);
+      if (noise_len > 0)
+	vm_deallocate (mach_task_self (), (vm_address_t)noise, noise_len);
+    }
+}
+
+/* Validates INF's task suspend count.  If it's higher than we expect, verify
+   with the user before `stealing' the extra count.  */
+static void
+inf_validate_task_sc (struct inf *inf)
+{
+  struct task_basic_info info;
+  mach_msg_type_number_t info_len = TASK_BASIC_INFO_COUNT;
+  error_t err =
+    task_info (inf->task->port, TASK_BASIC_INFO, (task_info_t)&info, &info_len);
+
+  if (err)
+    inf->task->dead = 1;	/* oh well */
+  else if (inf->task->cur_sc < info.suspend_count)
+    {
+      int abort;
+
+      target_terminal_ours ();	/* Allow I/O.  */
+      abort =
+	!query ("Pid %d has an additional task suspend count of %d; clear it? ",
+		inf->pid, info.suspend_count - inf->task->cur_sc);
+      target_terminal_inferior (); /* Give it back to the child.  */
+
+      if (abort)
+	error ("Additional task suspend count left untouched.");
+
+      inf->task->cur_sc = info.suspend_count;
+    }
+}
+
+/* Turns tracing for INF on or off, depending on ON, unless it already is.
+   If INF is running, the resume_sc count of INF's threads will be modified,
+   and the signal thread will briefly be run to change the trace state.  */
+void
+inf_set_traced (struct inf *inf, int on)
+{
+  if (on != inf->traced)
+    if (inf->task && !inf->task->dead)
+      /* Make it take effect immediately.  */
+      {
+	sigset_t mask = on ? ~(sigset_t)0 : 0;
+	error_t err =
+	  INF_RESUME_MSGPORT_RPC (inf, msg_set_init_int (msgport, refport,
+							 INIT_TRACEMASK, mask));
+	if (err == EIEIO)
+	  {
+	    if (on)
+	      warning ("Can't modify tracing state for pid %d: No signal thread",
+		       inf->pid);
+	    inf->traced = on;
+	  }
+	else if (err)
+	  warning ("Can't modify tracing state for pid %d: %s",
+		   inf->pid, strerror (err));
+	else
+	  inf->traced = on;
+      }
+    else
+      inf->traced = on;
+}
+
+/* Makes all the real suspend count deltas of all the procs in INF match the
+   desired values.  Careful to always do thread/task suspend counts in the
+   safe order.  Returns true if at least one thread is thought to be running.*/
+int
+inf_update_suspends (struct inf *inf)
+{
+  struct proc *task = inf->task;
+  /* We don't have to update INF->threads even though we're iterating over it
+     because we'll change a thread only if it already has an existing proc
+     entry.  */
+
+  inf_debug (inf, "updating suspend counts");
+
+  if (task)
+    {
+      struct proc *thread;
+      int task_running = (task->sc == 0), thread_running = 0;
+
+      if (task->sc > task->cur_sc)
+	/* The task is becoming _more_ suspended; do before any threads.  */
+	task_running = proc_update_sc (task);
+
+      if (inf->pending_execs)
+	/* When we're waiting for an exec, things may be happening behind our
+	   back, so be conservative.  */
+	thread_running = 1;
+
+      /* Do all the thread suspend counts.  */
+      for (thread = inf->threads; thread; thread = thread->next)
+	thread_running |= proc_update_sc (thread);
+
+      if (task->sc != task->cur_sc)
+	/* We didn't do the task first, because we wanted to wait for the
+	   threads; do it now.  */
+	task_running = proc_update_sc (task);
+
+      inf_debug (inf, "%srunning...",
+		 (thread_running && task_running) ? "" : "not ");
+
+      inf->running = thread_running && task_running;
+
+      /* Once any thread has executed some code, we can't depend on the
+	 threads list any more.  */
+      if (inf->running)
+	inf->threads_up_to_date = 0;
+
+      return inf->running;
+    }
+
+  return 0;
+}
+
+/* Converts a GDB pid to a struct proc.  */
+struct proc *
+inf_tid_to_thread (struct inf *inf, int tid)
+{
+  struct proc *thread = inf->threads;
+
+  while (thread)
+    if (thread->tid == tid)
+      return thread;
+    else
+      thread = thread->next;
+  return 0;
+}
+
+/* Converts a thread port to a struct proc.  */
+struct proc *
+inf_port_to_thread (struct inf *inf, mach_port_t port)
+{
+  struct proc *thread = inf->threads;
+  while (thread)
+    if (thread->port == port)
+      return thread;
+    else
+      thread = thread->next;
+  return 0;
+}
+
+/* Make INF's list of threads be consistent with reality of TASK.  */
+void
+inf_validate_procs (struct inf *inf)
+{
+  int i;
+  thread_array_t threads;
+  unsigned num_threads;
+  struct proc *task = inf->task;
+
+  /* If no threads are currently running, this function will guarantee that
+     things are up to date.  The exception is if there are zero threads --
+     then it is almost certainly in an odd state, and probably some outside
+     agent will create threads.  */
+  inf->threads_up_to_date = inf->threads ? !inf->running : 0;
+
+  if (task)
+    {
+      error_t err = task_threads (task->port, &threads, &num_threads);
+      inf_debug (inf, "fetching threads");
+      if (err)
+	/* TASK must be dead.  */
+	{
+	  task->dead = 1;
+	  task = 0;
+	}
+    }
+
+  if (!task)
+    {
+      num_threads = 0;
+      inf_debug (inf, "no task");
+    }
+
+  {
+    unsigned search_start = 0;	/* Make things normally linear.  */
+    /* Which thread in PROCS corresponds to each task thread, & the task.  */
+    struct proc *matched[num_threads + 1];
+    /* The last thread in INF->threads, so we can add to the end.  */
+    struct proc *last = 0;
+    /* The current thread we're considering. */
+    struct proc *thread = inf->threads;
+
+    bzero (matched, sizeof (matched));
+
+    while (thread)
+      {
+	unsigned left;
+
+	for (i = search_start, left = num_threads; left; i++, left--)
+	  {
+	    if (i >= num_threads)
+	      i -= num_threads; /* I wrapped around.  */
+	    if (thread->port == threads[i])
+	      /* We already know about this thread.  */
+	      {
+		matched[i] = thread;
+		last = thread;
+		thread = thread->next;
+		search_start++;
+		break;
+	      }
+	  }
+
+	if (! left)
+	  {
+	    proc_debug (thread, "died!");
+	    thread->port = MACH_PORT_NULL;
+	    thread = _proc_free (thread); /* THREAD is dead.  */
+	    (last ? last->next : inf->threads) = thread;
+	  }
+      }
+
+    for (i = 0; i < num_threads; i++)
+      if (matched[i])
+	/* Throw away the duplicate send right.  */
+	mach_port_deallocate (mach_task_self (), threads[i]);
+      else
+	/* THREADS[I] is a thread we don't know about yet!  */
+	{
+	  thread = make_proc (inf, threads[i], next_thread_id++);
+	  (last ? last->next : inf->threads) = thread;
+	  last = thread;
+	  proc_debug (thread, "new thread: %d", threads[i]);
+	  add_thread (thread->tid); /* Tell GDB's generic thread code.  */
+	}
+
+    vm_deallocate(mach_task_self(),
+		  (vm_address_t)threads, (num_threads * sizeof(thread_t)));
+  }
+}
+
+/* Makes sure that INF's thread list is synced with the actual process.  */
+inline int
+inf_update_procs (struct inf *inf)
+{
+  if (! inf->task)
+    return 0;
+  if (! inf->threads_up_to_date)
+    inf_validate_procs (inf);
+  return !!inf->task;
+}
+
+/* Sets the resume_sc of each thread in inf.  That of RUN_THREAD is set to 0,
+   and others are set to their run_sc if RUN_OTHERS is true, and otherwise
+   their pause_sc.  */
+inline void 
+inf_set_threads_resume_sc (struct inf *inf,
+			   struct proc *run_thread, int run_others)
+{
+  struct proc *thread;
+  inf_update_procs (inf);
+  for (thread = inf->threads; thread; thread = thread->next)
+    if (thread == run_thread)
+      thread->resume_sc = 0;
+    else if (run_others)
+      thread->resume_sc = thread->run_sc;
+    else
+      thread->resume_sc = thread->pause_sc;
+}
+
+/* Cause INF to continue execution immediately; individual threads may still
+   be suspended (but their suspend counts will be updated).  */
+inline void
+inf_resume (struct inf *inf)
+{
+  struct proc *thread;
+
+  inf_update_procs (inf);
+
+  for (thread = inf->threads; thread; thread = thread->next)
+    thread->sc = thread->resume_sc;
+
+  if (inf->task)
+    {
+      if (! inf->pending_execs)
+	/* Try to make sure our task count is correct -- in the case where
+	   we're waiting for an exec though, things are too volatile, so just
+	   assume things will be reasonable (which they usually will be).  */
+	inf_validate_task_sc (inf);
+      inf->task->sc = 0;
+    }
+
+  inf_update_suspends (inf);
+}
+
+/* Cause INF to stop execution immediately; individual threads may still
+   be running.  */
+inline void
+inf_suspend (struct inf *inf)
+{
+  struct proc *thread;
+
+  inf_update_procs (inf);
+
+  for (thread = inf->threads; thread; thread = thread->next)
+    thread->sc = thread->pause_sc;
+
+  if (inf->task)
+    inf->task->sc = inf->pause_sc;
+
+  inf_update_suspends (inf);
+}
+
+/* INF has one thread PROC that is in single-stepping mode.  This function
+   changes it to be PROC, changing any old step_thread to be a normal one.  A
+   PROC of 0 clears any existing value.  */
+void
+inf_set_step_thread (struct inf *inf, struct proc *thread)
+{
+  assert (!thread || proc_is_thread (thread));
+
+  if (thread)
+    inf_debug (inf, "setting step thread: %d/%d", inf->pid, thread->tid);
+  else
+    inf_debug (inf, "clearing step thread");
+
+  if (inf->step_thread != thread)
+    {
+      if (inf->step_thread && inf->step_thread->port != MACH_PORT_NULL)
+	if (! proc_trace (inf->step_thread, 0))
+	  return;
+      if (thread && proc_trace (thread, 1))
+	inf->step_thread = thread;
+      else
+	inf->step_thread = 0;
+    }
+}
+
+/* Set up the thread resume_sc's so that only the signal thread is running
+   (plus whatever other thread are set to always run).  Returns true if we
+   did so, or false if we can't find a signal thread.  */
+inline int
+inf_set_threads_resume_sc_for_signal_thread (struct inf *inf)
+{
+  if (inf->signal_thread)
+    {
+      inf_set_threads_resume_sc (inf, inf->signal_thread, 0);
+      return 1;
+    }
+  else
+    return 0;
+}
+
+static void
+inf_update_signal_thread (struct inf *inf)
+{
+  /* XXX for now we assume that if there's a msgport, the 2nd thread is
+     the signal thread.  */
+  inf->signal_thread = inf->threads ? inf->threads->next : 0;
+}
+
+/* Detachs from INF's inferior task, letting it run once again...  */
+void
+inf_detach (struct inf *inf)
+{
+  struct proc *task = inf->task;
+
+  inf_debug (inf, "detaching...");
+
+  inf_clear_wait (inf);
+  inf_set_step_thread (inf, 0);
+
+  if (task)
+    {
+      struct proc *thread;
+
+      inf_set_traced (inf, 0);
+      if (inf->stopped)
+	inf_signal (inf, TARGET_SIGNAL_0);
+
+      proc_restore_exc_port (task);
+      task->sc = inf->detach_sc;
+
+      for (thread = inf->threads; thread; thread = thread->next)
+	{
+	  proc_restore_exc_port (thread);
+	  thread->sc = thread->detach_sc;
+	}
+
+      inf_update_suspends (inf);
+    }
+
+  inf_cleanup (inf);
+}
+
+/* Attaches INF to the process with process id PID, returning it in a suspended
+   state suitable for debugging.  */
+void
+inf_attach (struct inf *inf, int pid)
+{
+  inf_debug (inf, "attaching: %d", pid);
+
+  if (inf->pid)
+    inf_detach (inf);
+
+  inf_startup (inf, pid);
+}
+
+/* Makes sure that we've got our exception ports entrenched in the process. */
+void inf_steal_exc_ports (struct inf *inf)
+{
+  struct proc *thread;
+
+  inf_debug (inf, "stealing exception ports");
+
+  inf_set_step_thread (inf, 0);	/* The step thread is special. */
+
+  proc_steal_exc_port (inf->task, inf->event_port);
+  for (thread = inf->threads; thread; thread = thread->next)
+    proc_steal_exc_port (thread, MACH_PORT_NULL);
+}
+
+/* Makes sure the process has its own exception ports.  */
+void inf_restore_exc_ports (struct inf *inf)
+{
+  struct proc *thread;
+
+  inf_debug (inf, "restoring exception ports");
+
+  inf_set_step_thread (inf, 0);	/* The step thread is special. */
+
+  proc_restore_exc_port (inf->task);
+  for (thread = inf->threads; thread; thread = thread->next)
+    proc_restore_exc_port (thread);
+}
+
+/* Deliver signal SIG to INF.  If INF is stopped, delivering a signal, even
+   signal 0, will continue it.  INF is assumed to be in a paused state, and
+   the resume_sc's of INF's threads may be affected.  */
+void
+inf_signal (struct inf *inf, enum target_signal sig)
+{
+  error_t err = 0;
+  int host_sig = target_signal_to_host (sig);
+
+#define NAME target_signal_to_name (sig)
+
+  if (host_sig >= _NSIG)
+    /* A mach exception.  Exceptions are encoded in the signal space by
+       putting them after _NSIG; this assumes they're positive (and not
+       extremely large)!  */
+    {
+      struct inf_wait *w = &inf->wait;
+      if (w->status.kind == TARGET_WAITKIND_STOPPED
+	  && w->status.value.sig == sig
+	  && w->thread && !w->thread->aborted)
+	/* We're passing through the last exception we received.  This is
+	   kind of bogus, because exceptions are per-thread whereas gdb
+	   treats signals as per-process.  We just forward the exception to
+	   the correct handler, even it's not for the same thread as TID --
+	   i.e., we pretend it's global.  */
+	{
+	  struct exc_state *e = &w->exc;
+	  inf_debug (inf, "passing through exception:"
+		     " task = %d, thread = %d, exc = %d"
+		     ", code = %d, subcode = %d",
+		     w->thread->port, inf->task->port,
+		     e->exception, e->code, e->subcode);
+	  err =
+	    exception_raise_request (e->handler,
+				     e->reply, MACH_MSG_TYPE_MOVE_SEND_ONCE,
+				     w->thread->port, inf->task->port,
+				     e->exception, e->code, e->subcode);
+	}
+      else
+	error ("Can't forward spontaneous exception (%s).", NAME);
+    }
+  else
+    /* A Unix signal.  */
+    if (inf->stopped)
+      /* The process is stopped and expecting a signal.  Just send off a
+	 request and let it get handled when we resume everything.  */
+      {
+	inf_debug (inf, "sending %s to stopped process", NAME);
+	err =
+	  INF_MSGPORT_RPC (inf,
+			   msg_sig_post_untraced_request (msgport,
+							  inf->event_port,
+							  MACH_MSG_TYPE_MAKE_SEND_ONCE,
+							  host_sig, 0,
+							  refport));
+	if (! err)
+	  /* Posting an untraced signal automatically continues it.
+	     We clear this here rather than when we get the reply
+	     because we'd rather assume it's not stopped when it
+	     actually is, than the reverse.  */
+	  inf->stopped = 0;
+      }
+    else
+      /* It's not expecting it.  We have to let just the signal thread
+	 run, and wait for it to get into a reasonable state before we
+	 can continue the rest of the process.  When we finally resume the
+	 process the signal we request will be the very first thing that
+	 happens. */
+      {
+	inf_debug (inf, "sending %s to unstopped process (so resuming signal thread)", NAME);
+	err = 
+	  INF_RESUME_MSGPORT_RPC (inf, msg_sig_post_untraced (msgport,
+							      host_sig, 0, refport));
+      }
+
+  if (err == EIEIO)
+    /* Can't do too much... */
+    warning ("Can't deliver signal %s: No signal thread.", NAME);
+  else if (err)
+    warning ("Delivering signal %s: %s", NAME, strerror (err));
+
+#undef NAME
+}
+
+/* The inferior used for all gdb target ops.  */
+struct inf *current_inferior = 0;
+
+/* The inferior being waited for by gnu_wait.  Since GDB is decidely not
+   multi-threaded, we don't bother to lock this.  */
+struct inf *waiting_inf;
+
+/* Wait for something to happen in the inferior, returning what in STATUS. */
+static int
+gnu_wait (int tid, struct target_waitstatus *status)
+{
+  struct msg {
+    mach_msg_header_t hdr;
+    mach_msg_type_t type;
+    int data[8000];
+  } msg;
+  error_t err;
+  struct proc *thread;
+  struct inf *inf = current_inferior;
+
+  assert (inf->task);
+
+  if (!inf->threads && !inf->pending_execs)
+    /* No threads!  Assume that maybe some outside agency is frobbing our
+       task, and really look for new threads.  If we can't find any, just tell
+       the user to try again later.  */
+    {
+      inf_validate_procs (inf);
+      if (!inf->threads && !inf->task->dead)
+	error ("There are no threads; try again later.");
+    }
+
+  waiting_inf = inf;
+
+  inf_debug (inf, "waiting for: %d", tid);
+
+ rewait:
+  if (proc_wait_pid != inf->pid && !inf->no_wait)
+    /* Always get information on events from the proc server.  */
+    {
+      inf_debug (inf, "requesting wait on pid %d", inf->pid);
+
+      if (proc_wait_pid)
+	/* The proc server is single-threaded, and only allows a single
+	   outstanding wait request, so we have to cancel the previous one. */
+	{
+	  inf_debug (inf, "cancelling previous wait on pid %d", proc_wait_pid);
+	  interrupt_operation (proc_server, 0);
+	}
+
+      err =
+	proc_wait_request (proc_server, inf->event_port, inf->pid, WUNTRACED);
+      if (err)
+	warning ("wait request failed: %s", strerror (err));
+      else
+	{
+	  inf_debug (inf, "waits pending: %d", proc_waits_pending);
+	  proc_wait_pid = inf->pid;
+	  /* Even if proc_waits_pending was > 0 before, we still won't get
+	     any other replies, because it was either from a different INF,
+	     or a different process attached to INF -- and the event port,
+	     which is the wait reply port, changes when you switch processes.*/
+	  proc_waits_pending = 1;
+	}
+    }
+
+  inf_clear_wait (inf);
+
+  /* What can happen? (1) Dead name notification; (2) Exceptions arrive;
+     (3) wait reply from the proc server.  */
+
+  inf_debug (inf, "waiting for an event...");
+  err = mach_msg (&msg.hdr, MACH_RCV_MSG | MACH_RCV_INTERRUPT,
+		  0, sizeof (struct msg), inf->event_port,
+		  MACH_MSG_TIMEOUT_NONE, MACH_PORT_NULL);
+
+  /* Re-suspend the task.  */
+  inf_suspend (inf);
+
+  if (!inf->task && inf->pending_execs)
+    /* When doing an exec, it's possible that the old task wasn't reused
+       (e.g., setuid execs).  So if the task seems to have disappeared,
+       attempt to refetch it, as the pid should still be the same.  */
+    inf_set_pid (inf, inf->pid);
+
+  if (err == EMACH_RCV_INTERRUPTED)
+    inf_debug (inf, "interrupted");
+  else if (err)
+    error ("Couldn't wait for an event: %s", strerror (err));
+  else
+    {
+      struct {
+	mach_msg_header_t hdr;
+	mach_msg_type_t err_type;
+	kern_return_t err;
+	char noise[200];
+      } reply;
+
+      inf_debug (inf, "event: msgid = %d", msg.hdr.msgh_id);
+
+      /* Handle what we got.  */
+      if (! notify_server (&msg.hdr, &reply.hdr)
+	  && ! exc_server (&msg.hdr, &reply.hdr)
+	  && ! process_reply_server (&msg.hdr, &reply.hdr)
+	  && ! msg_reply_server (&msg.hdr, &reply.hdr))
+	/* Whatever it is, it's something strange.  */
+	error ("Got a strange event, msg id = %d.", msg.hdr.msgh_id);
+
+      if (reply.err)
+	error ("Handling event, msgid = %d: %s",
+	       msg.hdr.msgh_id, strerror (reply.err));
+    }
+
+  if (inf->pending_execs)
+    /* We're waiting for the inferior to finish execing.  */
+    {
+      struct inf_wait *w = &inf->wait;
+      enum target_waitkind kind = w->status.kind;
+
+      if (kind == TARGET_WAITKIND_SPURIOUS)
+	/* Since gdb is actually counting the number of times the inferior
+	   stops, expecting one stop per exec, we only return major events
+	   while execing.  */
+	{
+	  w->suppress = 1;
+	  inf_debug (inf, "pending_execs = %d, ignoring minor event",
+		     inf->pending_execs);
+	}
+      else if (kind == TARGET_WAITKIND_STOPPED
+	       && w->status.value.sig == TARGET_SIGNAL_TRAP)
+	/* Ah hah!  A SIGTRAP from the inferior while starting up probably
+	   means we've succesfully completed an exec!  */
+	{
+	  if (--inf->pending_execs == 0)
+	    /* We're done!  */
+	    {
+#if 0	/* do we need this? */
+	      prune_threads (1);	/* Get rid of the old shell threads */
+	      renumber_threads (0); /* Give our threads reasonable names. */
+#endif
+	    }
+	  inf_debug (inf, "pending exec completed, pending_execs => %d",
+		     inf->pending_execs);
+	}
+      else if (kind == TARGET_WAITKIND_STOPPED)
+	/* It's possible that this signal is because of a crashed process
+	   being handled by the hurd crash server; in this case, the process
+	   will have an extra task suspend, which we need to know about.
+	   Since the code in inf_resume that normally checks for this is
+	   disabled while INF->pending_execs, we do the check here instead.  */
+	inf_validate_task_sc (inf);
+    }
+
+  if (inf->wait.suppress)
+    /* Some totally spurious event happened that we don't consider
+       worth returning to gdb.  Just keep waiting.  */
+    {
+      inf_debug (inf, "suppressing return, rewaiting...");
+      inf_resume (inf);
+      goto rewait;
+    }
+
+  /* Pass back out our results.  */
+  bcopy (&inf->wait.status, status, sizeof (*status));
+
+  thread = inf->wait.thread;
+  if (thread)
+    tid = thread->tid;
+  else
+    thread = inf_tid_to_thread (inf, tid);
+
+  if (!thread || thread->port == MACH_PORT_NULL)
+    /* TID is dead; try and find a new thread.  */
+    if (inf_update_procs (inf) && inf->threads)
+      tid = inf->threads->tid;	/* The first available thread.  */
+    else
+      tid = inferior_pid; /* let wait_for_inferior handle exit case */
+
+  if (thread && tid >= 0 && status->kind != TARGET_WAITKIND_SPURIOUS
+      && inf->pause_sc == 0 && thread->pause_sc == 0)
+    /* If something actually happened to THREAD, make sure we suspend it.  */
+    {
+      thread->sc = 1;
+      inf_update_suspends (inf);
+    }      
+
+  inf_debug (inf, "returning tid = %d, status = %s (%d)", tid,
+	     status->kind == TARGET_WAITKIND_EXITED ? "EXITED"
+	     : status->kind == TARGET_WAITKIND_STOPPED ? "STOPPED"
+	     : status->kind == TARGET_WAITKIND_SIGNALLED ? "SIGNALLED"
+	     : status->kind == TARGET_WAITKIND_LOADED ? "LOADED"
+	     : status->kind == TARGET_WAITKIND_SPURIOUS ? "SPURIOUS"
+	     : "?",
+	     status->value.integer);
+
+  return tid;
+}
+
+/* The rpc handler called by exc_server.  */
+error_t
+S_exception_raise_request (mach_port_t port, mach_port_t reply_port,
+			   thread_t thread_port, task_t task_port,
+			   int exception, int code, int subcode)
+{
+  struct inf *inf = waiting_inf;
+  struct proc *thread = inf_port_to_thread (inf, thread_port);
+
+  inf_debug (waiting_inf,
+	     "thread = %d, task = %d, exc = %d, code = %d, subcode = %d",
+	     thread_port, task_port, exception, code);
+
+  if (!thread)
+    /* We don't know about thread?  */
+    {
+      inf_update_procs (inf);
+      thread = inf_port_to_thread (inf, thread_port);
+      if (!thread)
+	/* Give up, the generating thread is gone.  */
+	return 0;
+    }
+
+  mach_port_deallocate (mach_task_self (), thread_port);
+  mach_port_deallocate (mach_task_self (), task_port);
+
+  if (! thread->aborted)
+    /* THREAD hasn't been aborted since this exception happened (abortion
+       clears any exception state), so it must be real.  */
+    {
+      /* Store away the details; this will destroy any previous info.  */
+      inf->wait.thread = thread;
+
+      inf->wait.status.kind = TARGET_WAITKIND_STOPPED;
+
+      if (exception == EXC_BREAKPOINT)
+	/* GDB likes to get SIGTRAP for breakpoints.  */
+	{
+	  inf->wait.status.value.sig = TARGET_SIGNAL_TRAP;
+	  mach_port_deallocate (mach_task_self (), reply_port);
+	}
+      else
+	/* Record the exception so that we can forward it later.  */
+	{
+	  if (thread->exc_port == port)
+	    {
+	      inf_debug (waiting_inf, "Handler is thread exeption port <%d>",
+			 thread->saved_exc_port);
+	      inf->wait.exc.handler = thread->saved_exc_port;
+	    }
+	  else
+	    {
+	      inf_debug (waiting_inf, "Handler is task exeption port <%d>",
+			 inf->task->saved_exc_port);
+	      inf->wait.exc.handler = inf->task->saved_exc_port;
+	      assert (inf->task->exc_port == port);
+	    }
+	  if (inf->wait.exc.handler != MACH_PORT_NULL)
+	    /* Add a reference to the exception handler. */
+	    mach_port_mod_refs (mach_task_self (),
+				inf->wait.exc.handler, MACH_PORT_RIGHT_SEND,
+				1);
+
+	  inf->wait.exc.exception = exception;
+	  inf->wait.exc.code = code;
+	  inf->wait.exc.subcode = subcode;
+	  inf->wait.exc.reply = reply_port;
+
+	  /* Exceptions are encoded in the signal space by putting them after
+	     _NSIG; this assumes they're positive (and not extremely large)! */
+	  inf->wait.status.value.sig =
+	    target_signal_from_host (_NSIG + exception);
+	}
+    }
+  else
+    /* A supppressed exception, which ignore.  */
+    {
+      inf->wait.suppress = 1;
+      mach_port_deallocate (mach_task_self (), reply_port);
+    }
+
+  return 0;
+}
+
+/* Fill in INF's wait field after a task has died without giving us more
+   detailed information.  */
+void
+inf_task_died_status (struct inf *inf)
+{
+  warning ("Pid %d died with unknown exit status, using SIGKILL.", inf->pid);
+  inf->wait.status.kind = TARGET_WAITKIND_SIGNALLED;
+  inf->wait.status.value.sig = TARGET_SIGNAL_KILL;
+}
+
+/* Notify server routines.  The only real one is dead name notification.  */
+error_t
+do_mach_notify_dead_name (mach_port_t notify, mach_port_t dead_port)
+{
+  struct inf *inf = waiting_inf;
+
+  inf_debug (waiting_inf, "port = %d", dead_port);
+
+  if (inf->task && inf->task->port == dead_port)
+    {
+      proc_debug (inf->task, "is dead");
+      inf->task->port = MACH_PORT_NULL;
+      if (proc_wait_pid == inf->pid)
+	/* We have a wait outstanding on the process, which will return more
+	   detailed information, so delay until we get that.  */
+	inf->wait.suppress = 1;
+      else
+	/* We never waited for the process (maybe it wasn't a child), so just
+	   pretend it got a SIGKILL.  */
+	inf_task_died_status (inf);
+    }
+  else
+    {
+      struct proc *thread = inf_port_to_thread (inf, dead_port);
+      if (thread)
+	{
+	  proc_debug (thread, "is dead");
+	  thread->port = MACH_PORT_NULL;
+	}
+    }
+
+  mach_port_deallocate (mach_task_self (), dead_port);
+  inf->threads_up_to_date = 0; /* Just in case */
+
+  return 0;
+}
+
+static error_t
+ill_rpc (char *fun)
+{
+  warning ("illegal rpc: %s", fun);
+  return 0;
+}
+
+error_t
+do_mach_notify_no_senders (mach_port_t notify, mach_port_mscount_t count)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+error_t
+do_mach_notify_port_deleted (mach_port_t notify, mach_port_t name)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+error_t
+do_mach_notify_msg_accepted (mach_port_t notify, mach_port_t name)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+error_t
+do_mach_notify_port_destroyed (mach_port_t notify, mach_port_t name)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+error_t
+do_mach_notify_send_once (mach_port_t notify)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+/* Process_reply server routines.  We only use process_wait_reply.  */
+
+error_t
+S_proc_wait_reply (mach_port_t reply, error_t err,
+		   int status, int sigcode, rusage_t rusage, pid_t pid)
+{
+  struct inf *inf = waiting_inf;
+
+  inf_debug (inf, "err = %s, pid = %d, status = 0x%x, sigcode = %d",
+	     err ? strerror (err) : "0", pid, status, sigcode);
+
+  if (err && proc_wait_pid && (!inf->task || !inf->task->port))
+    /* Ack.  The task has died, but the task-died notification code didn't
+       tell anyone because it thought a more detailed reply from the
+       procserver was forthcoming.  However, we now learn that won't
+       happen...  So we have to act like the task just died, and this time,
+       tell the world.  */
+    inf_task_died_status (inf);
+
+  if (--proc_waits_pending == 0)
+    /* PROC_WAIT_PID represents the most recent wait.  We will always get
+       replies in order because the proc server is single threaded.  */
+    proc_wait_pid = 0;
+
+  inf_debug (inf, "waits pending now: %d", proc_waits_pending);
+
+  if (err)
+    {
+      if (err != EINTR)
+	{
+	  warning ("Can't wait for pid %d: %s", inf->pid, strerror (err));
+	  inf->no_wait = 1;
+
+	  /* Since we can't see the inferior's signals, don't trap them.  */
+	  inf_set_traced (inf, 0);
+	}
+    }
+  else if (pid == inf->pid)
+    {
+      store_waitstatus (&inf->wait.status, status);
+      if (inf->wait.status.kind == TARGET_WAITKIND_STOPPED)
+	/* The process has sent us a signal, and stopped itself in a sane
+	   state pending our actions.  */
+	{
+	  inf_debug (inf, "process has stopped itself");
+	  inf->stopped = 1;
+	}
+    }
+  else
+    inf->wait.suppress = 1;	/* Something odd happened.  Ignore.  */
+
+  return 0;
+}
+
+error_t
+S_proc_setmsgport_reply (mach_port_t reply, error_t err,
+			 mach_port_t old_msg_port)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+error_t
+S_proc_getmsgport_reply (mach_port_t reply, error_t err, mach_port_t msg_port)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+/* Msg_reply server routines.  We only use msg_sig_post_untraced_reply.  */
+
+error_t
+S_msg_sig_post_untraced_reply (mach_port_t reply, error_t err)
+{
+  struct inf *inf = waiting_inf;
+
+  if (err == EBUSY)
+    /* EBUSY is what we get when the crash server has grabbed control of the
+       process and doesn't like what signal we tried to send it.  Just act
+       like the process stopped (using a signal of 0 should mean that the
+       *next* time the user continues, it will pass signal 0, which the crash
+       server should like).  */
+    {
+      inf->wait.status.kind = TARGET_WAITKIND_STOPPED;
+      inf->wait.status.value.sig = TARGET_SIGNAL_0;
+    }
+  else if (err)
+    warning ("Signal delivery failed: %s", strerror (err));
+
+  if (err)
+    /* We only get this reply when we've posted a signal to a process which we
+       thought was stopped, and which we expected to continue after the signal.
+       Given that the signal has failed for some reason, it's reasonable to
+       assume it's still stopped.  */
+    inf->stopped = 1;
+  else
+    inf->wait.suppress = 1;
+
+  return 0;
+}
+
+error_t
+S_msg_sig_post_reply (mach_port_t reply, error_t err)
+{
+  return ill_rpc (__FUNCTION__);
+}
+
+/* Returns the number of messages queued for the receive right PORT.  */
+static mach_port_msgcount_t
+port_msgs_queued (mach_port_t port)
+{
+  struct mach_port_status status;
+  error_t err =
+    mach_port_get_receive_status (mach_task_self (), port, &status);
+
+  if (err)
+    return 0;
+  else
+    return status.mps_msgcount;
+}
+
+/* Resume execution of the inferior process.
+
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.
+
+   TID  STEP:
+   -1   true   Single step the current thread allowing other threads to run.
+   -1   false  Continue the current thread allowing other threads to run.
+   X    true   Single step the given thread, don't allow any others to run.
+   X    false  Continue the given thread, do not allow any others to run.
+   (Where X, of course, is anything except -1)
+
+   Note that a resume may not `take' if there are pending exceptions/&c
+   still unprocessed from the last resume we did (any given resume may result
+   in multiple events returned by wait).
+*/
+static void
+gnu_resume (int tid, int step, enum target_signal sig)
+{
+  struct proc *step_thread = 0;
+  struct inf *inf = current_inferior;
+
+  inf_debug (inf, "tid = %d, step = %d, sig = %d", tid, step, sig);
+
+  if (sig != TARGET_SIGNAL_0 || inf->stopped)
+    inf_signal (inf, sig);
+  else if (inf->wait.exc.reply != MACH_PORT_NULL)
+    /* We received an exception to which we have chosen not to forward, so
+       abort the faulting thread, which will perhaps retake it.  */
+    {
+      proc_abort (inf->wait.thread, 1);
+      warning ("Aborting %s with unforwarded exception %s.",
+	       proc_string (inf->wait.thread),
+	       target_signal_to_name (inf->wait.status.value.sig));
+    }
+
+  if (port_msgs_queued (inf->event_port))
+    /* If there are still messages in our event queue, don't bother resuming
+       the process, as we're just going to stop it right away anyway. */
+    return;
+
+  inf_update_procs (inf);
+
+  if (tid < 0)
+    /* Allow all threads to run, except perhaps single-stepping one.  */
+    {
+      inf_debug (inf, "running all threads; tid = %d", inferior_pid);
+      tid = inferior_pid;	/* What to step. */
+      inf_set_threads_resume_sc (inf, 0, 1);
+    }
+  else
+    /* Just allow a single thread to run.  */
+    {
+      struct proc *thread = inf_tid_to_thread (inf, tid);
+      if (! thread)
+	error ("Can't run single thread id %d: no such thread!");
+      inf_debug (inf, "running one thread: %d/%d", inf->pid, thread->tid);
+      inf_set_threads_resume_sc (inf, thread, 0);
+    }
+
+  if (step)
+    {
+      step_thread = inf_tid_to_thread (inf, tid);
+      if (! step_thread)
+	warning ("Can't step thread id %d: no such thread.", tid);
+      else
+	inf_debug (inf, "stepping thread: %d/%d", inf->pid, step_thread->tid);
+    }
+  if (step_thread != inf->step_thread)
+    inf_set_step_thread (inf, step_thread);
+
+  inf_debug (inf, "here we go...");
+  inf_resume (inf);
+}
+
+static void
+gnu_kill_inferior ()
+{
+  struct proc *task = current_inferior->task;
+  if (task)
+    {
+      proc_debug (task, "terminating...");
+      task_terminate (task->port);
+      inf_set_pid (current_inferior, -1);
+    }
+  target_mourn_inferior ();
+}
+
+/* Clean up after the inferior dies.  */
+
+static void
+gnu_mourn_inferior ()
+{
+  inf_debug (current_inferior, "rip");
+  inf_detach (current_inferior);
+  unpush_target (&gnu_ops);
+  generic_mourn_inferior ();
+}
+
+/* Fork an inferior process, and start debugging it.  */
+
+/* Set INFERIOR_PID to the first thread available in the child, if any.  */
+static int
+inf_pick_first_thread ()
+{
+  if (current_inferior->task && current_inferior->threads)
+    /* The first thread.  */
+    return current_inferior->threads->tid;
+  else
+    /* What may be the next thread.  */
+    return next_thread_id;
+}
+
+static struct inf *
+cur_inf ()
+{
+  if (! current_inferior)
+    current_inferior = make_inf ();
+  return current_inferior;
+}
+
+static void
+gnu_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  struct inf *inf = cur_inf ();
+
+  void trace_me ()
+    {
+      /* We're in the child; make this process stop as soon as it execs.  */
+      inf_debug (inf, "tracing self");
+      if (ptrace (PTRACE_TRACEME) != 0)
+	error ("ptrace (PTRACE_TRACEME) failed!");
+    }
+  int attach_to_child (int pid)
+    {
+      /* Attach to the now stopped child, which is actually a shell...  */
+      inf_debug (inf, "attaching to child: %d", pid);
+
+      inf_attach (inf, pid);
+
+      attach_flag = 0;
+      push_target (&gnu_ops);
+
+      inf->pending_execs = 2;
+      inf->traced = 1;
+
+      /* Now let the child run again, knowing that it will stop immediately
+	 because of the ptrace. */
+      inf_resume (inf);
+      inferior_pid = inf_pick_first_thread ();
+
+      startup_inferior (inf->pending_execs);
+
+      return inferior_pid;
+    }
+
+  inf_debug (inf, "creating inferior");
+
+    fork_inferior (exec_file, allargs, env, trace_me, attach_to_child, NULL, NULL);
+
+  inf_update_signal_thread (inf);
+  inf_set_traced (inf, inf->want_signals);
+
+  /* Execing the process will have trashed our exception ports; steal them
+     back (or make sure they're restored if the user wants that).  */
+  if (inf->want_exceptions)
+    inf_steal_exc_ports (inf);
+  else
+    inf_restore_exc_ports (inf);
+
+  /* Here we go!  */
+  proceed ((CORE_ADDR) -1, 0, 0);
+}
+
+/* Mark our target-struct as eligible for stray "run" and "attach"
+   commands.  */
+static int
+gnu_can_run ()
+{
+  return 1;
+}
+
+#ifdef ATTACH_DETACH
+
+/* Attach to process PID, then initialize for debugging it
+   and wait for the trace-trap that results from attaching.  */
+static void
+gnu_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int pid;
+  char *exec_file;
+  struct inf *inf = cur_inf ();
+
+  if (!args)
+    error_no_arg ("PID to attach");
+
+  pid = atoi (args);
+
+  if (pid == getpid())		/* Trying to masturbate? */
+    error ("I refuse to debug myself!");
+
+  if (from_tty)
+    {
+      exec_file = (char *) get_exec_file (0);
+
+      if (exec_file)
+	printf_unfiltered ("Attaching to program `%s', pid %d\n",
+			   exec_file, pid);
+      else
+	printf_unfiltered ("Attaching to pid %d\n", pid);
+
+      gdb_flush (gdb_stdout);
+    }
+
+  inf_debug (inf, "attaching to pid: %d", pid);
+
+  inf_attach (inf, pid);
+  inf_update_procs (inf);
+
+  inferior_pid = inf_pick_first_thread ();
+
+  attach_flag = 1;
+  push_target (&gnu_ops);
+
+  inf_update_signal_thread (inf);
+  inf_set_traced (inf, inf->want_signals);
+
+  /* If the process was stopped before we attached, make it continue the next
+     time the user does a continue.  */
+  inf_validate_stopped (inf);
+
+#if 0 /* Do we need this? */
+  renumber_threads (0);		/* Give our threads reasonable names. */
+#endif
+}
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via fork.  */
+static void
+gnu_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (from_tty)
+    {
+      char *exec_file = get_exec_file (0);
+      if (exec_file)
+	printf_unfiltered ("Detaching from program `%s' pid %d\n",
+			   exec_file, current_inferior->pid);
+      else
+	printf_unfiltered ("Detaching from pid %d\n", current_inferior->pid);
+      gdb_flush (gdb_stdout);
+    }
+  
+  inf_detach (current_inferior);
+
+  inferior_pid = 0;
+
+  unpush_target (&gnu_ops);		/* Pop out of handling an inferior */
+}
+#endif /* ATTACH_DETACH */
+
+static void
+gnu_terminal_init_inferior ()
+{
+  assert (current_inferior);
+  terminal_init_inferior_with_pgrp (current_inferior->pid);
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+gnu_prepare_to_store ()
+{
+#ifdef CHILD_PREPARE_TO_STORE
+  CHILD_PREPARE_TO_STORE ();
+#endif
+}
+
+static void
+gnu_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Unix child process.");
+}
+
+static void
+gnu_stop ()
+{
+  error ("to_stop target function not implemented");
+}
+
+static void
+gnu_pid_to_exec_file ()
+{
+  error ("to_pid_to_exec_file target function not implemented");
+}
+ 
+
+static int
+gnu_thread_alive (int tid)
+{
+  inf_update_procs (current_inferior);
+  return !!inf_tid_to_thread (current_inferior, tid);
+}
+
+/*
+ * Read inferior task's LEN bytes from ADDR and copy it to MYADDR
+ * in gdb's address space.
+ *
+ * Return 0 on failure; number of bytes read otherwise.
+ */
+int
+gnu_read_inferior (task, addr, myaddr, length)
+     task_t task;
+     CORE_ADDR addr;
+     char *myaddr;
+     int length;
+{
+  error_t err;
+  vm_address_t low_address = (vm_address_t) trunc_page (addr);
+  vm_size_t aligned_length =
+    (vm_size_t) round_page (addr+length) - low_address;
+  pointer_t    copied;
+  int	       copy_count;
+
+  /* Get memory from inferior with page aligned addresses */
+  err = vm_read (task, low_address, aligned_length, &copied, &copy_count);
+  if (err)
+    return 0;
+
+  err = hurd_safe_copyin (myaddr, (void*)addr - low_address + copied, length);
+  if (err)
+    {
+      warning ("Read from inferior faulted: %s", strerror (err));
+      length = 0;
+    }
+
+  err = vm_deallocate (mach_task_self (), copied, copy_count);
+  if (err)
+    warning ("gnu_read_inferior vm_deallocate failed: %s", strerror (err));
+
+  return length;
+}
+
+#define CHK_GOTO_OUT(str,ret) \
+  do if (ret != KERN_SUCCESS) { errstr = #str; goto out; } while(0)
+
+struct vm_region_list {
+  struct vm_region_list *next;
+  vm_prot_t	protection;
+  vm_address_t  start;
+  vm_size_t	length;
+};
+
+struct obstack  region_obstack;
+
+/*
+ * Write gdb's LEN bytes from MYADDR and copy it to ADDR
+ * in inferior task's address space.
+ */
+int
+gnu_write_inferior (task, addr, myaddr, length)
+     task_t task;
+     CORE_ADDR addr;
+     char *myaddr;
+     int length;
+{
+  error_t err = 0;
+  vm_address_t low_address       = (vm_address_t) trunc_page (addr);
+  vm_size_t    aligned_length = 
+    			(vm_size_t) round_page (addr+length) - low_address;
+  pointer_t    copied;
+  int	       copy_count;
+  int	       deallocate = 0;
+
+  char         *errstr = "Bug in gnu_write_inferior";
+
+  struct vm_region_list *region_element;
+  struct vm_region_list *region_head = (struct vm_region_list *)NULL;
+
+  /* Get memory from inferior with page aligned addresses */
+  err = vm_read (task,
+		 low_address,
+		 aligned_length,
+		 &copied,
+		 &copy_count);
+  CHK_GOTO_OUT ("gnu_write_inferior vm_read failed", err);
+
+  deallocate++;
+
+  err = hurd_safe_copyout ((void*)addr - low_address + copied, myaddr, length);
+  CHK_GOTO_OUT ("Write to inferior faulted", err);
+
+  obstack_init (&region_obstack);
+
+  /* Do writes atomically.
+   * First check for holes and unwritable memory.
+   */
+  {
+    vm_size_t    remaining_length  = aligned_length;
+    vm_address_t region_address    = low_address;
+
+    struct vm_region_list *scan;
+
+    while(region_address < low_address + aligned_length)
+      {
+	vm_prot_t protection;
+	vm_prot_t max_protection;
+	vm_inherit_t inheritance;
+	boolean_t shared;
+	mach_port_t object_name;
+	vm_offset_t offset;
+	vm_size_t   region_length = remaining_length;
+	vm_address_t old_address  = region_address;
+    
+	err = vm_region (task,
+			 &region_address,
+			 &region_length,
+			 &protection,
+			 &max_protection,
+			 &inheritance,
+			 &shared,
+			 &object_name,
+			 &offset);
+	CHK_GOTO_OUT ("vm_region failed", err);
+
+	/* Check for holes in memory */
+	if (old_address != region_address)
+	  {
+	    warning ("No memory at 0x%x. Nothing written",
+		     old_address);
+	    err = KERN_SUCCESS;
+	    length = 0;
+	    goto out;
+	  }
+
+	if (!(max_protection & VM_PROT_WRITE))
+	  {
+	    warning ("Memory at address 0x%x is unwritable. Nothing written",
+		     old_address);
+	    err = KERN_SUCCESS;
+	    length = 0;
+	    goto out;
+	  }
+
+	/* Chain the regions for later use */
+	region_element = 
+	  (struct vm_region_list *)
+	    obstack_alloc (&region_obstack, sizeof (struct vm_region_list));
+    
+	region_element->protection = protection;
+	region_element->start      = region_address;
+	region_element->length     = region_length;
+
+	/* Chain the regions along with protections */
+	region_element->next = region_head;
+	region_head          = region_element;
+	
+	region_address += region_length;
+	remaining_length = remaining_length - region_length;
+      }
+
+    /* If things fail after this, we give up.
+     * Somebody is messing up inferior_task's mappings.
+     */
+    
+    /* Enable writes to the chained vm regions */
+    for (scan = region_head; scan; scan = scan->next)
+      {
+	boolean_t protection_changed = FALSE;
+	
+	if (!(scan->protection & VM_PROT_WRITE))
+	  {
+	    err = vm_protect (task,
+			      scan->start,
+			      scan->length,
+			      FALSE,
+			      scan->protection | VM_PROT_WRITE);
+	    CHK_GOTO_OUT ("vm_protect: enable write failed", err);
+	  }
+      }
+
+    err = vm_write (task,
+		    low_address,
+		    copied,
+		    aligned_length);
+    CHK_GOTO_OUT ("vm_write failed", err);
+	
+    /* Set up the original region protections, if they were changed */
+    for (scan = region_head; scan; scan = scan->next)
+      {
+	boolean_t protection_changed = FALSE;
+	
+	if (!(scan->protection & VM_PROT_WRITE))
+	  {
+	    err = vm_protect (task,
+			      scan->start,
+			      scan->length,
+			      FALSE,
+			      scan->protection);
+	    CHK_GOTO_OUT ("vm_protect: enable write failed", err);
+	  }
+      }
+  }
+
+ out:
+  if (deallocate)
+    {
+      obstack_free (&region_obstack, 0);
+      
+      (void) vm_deallocate (mach_task_self (),
+			    copied,
+			    copy_count);
+    }
+
+  if (err != KERN_SUCCESS)
+    {
+      warning ("%s: %s", errstr, mach_error_string (err));
+      return 0;
+    }
+
+  return length;
+}
+
+/* Return 0 on failure, number of bytes handled otherwise.  */
+static int
+gnu_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* IGNORED */
+{
+  int result;
+  task_t task =
+    current_inferior
+      ? (current_inferior->task ? current_inferior->task->port : 0)
+      : 0;
+
+  if (task == MACH_PORT_NULL)
+    return 0;
+  else
+    {
+      inf_debug (current_inferior, "%s %p[%d] %s %p",
+		 write ? "writing" : "reading", memaddr, len,
+		 write ? "<--" : "-->", myaddr);
+      if (write)
+	return gnu_write_inferior (task, memaddr, myaddr, len);
+      else
+	return gnu_read_inferior  (task, memaddr, myaddr, len);
+    }
+}
+
+extern void gnu_store_registers (int regno);
+extern void gnu_fetch_registers (int regno);
+
+struct target_ops gnu_ops ;
+
+static void
+init_gnu_ops(void)
+{
+  gnu_ops.to_shortname =   "GNU";		/* to_shortname */
+  gnu_ops.to_longname =   "GNU Hurd process";	/* to_longname */
+  gnu_ops.to_doc =   "GNU Hurd process";	/* to_doc */
+  gnu_ops.to_open =   gnu_open;			/* to_open */
+  gnu_ops.to_close =   0;			/* to_close */
+  gnu_ops.to_attach =   gnu_attach;		/* to_attach */
+  gnu_ops.to_post_attach = NULL;
+  gnu_ops.to_require_attach = NULL;             /* to_require_attach */
+  gnu_ops.to_detach =   gnu_detach;	 	/* to_detach */
+  gnu_ops.to_require_detach = NULL;             /* to_require_detach */
+  gnu_ops.to_resume =   gnu_resume;		/* to_resume */
+  gnu_ops.to_wait  =   gnu_wait;		/* to_wait */
+  gnu_ops.to_post_wait = NULL;                         /* to_post_wait */
+  gnu_ops.to_fetch_registers  =   gnu_fetch_registers;	/* to_fetch_registers */
+  gnu_ops.to_store_registers  =   gnu_store_registers;	/* to_store_registers */
+  gnu_ops.to_prepare_to_store =   gnu_prepare_to_store;	/* to_prepare_to_store */
+  gnu_ops.to_xfer_memory  =   gnu_xfer_memory;	/* to_xfer_memory */
+  gnu_ops.to_files_info  =   0;			/* to_files_info */
+  gnu_ops.to_insert_breakpoint =   memory_insert_breakpoint;
+  gnu_ops.to_remove_breakpoint =   memory_remove_breakpoint;
+  gnu_ops.to_terminal_init  =   gnu_terminal_init_inferior;
+  gnu_ops.to_terminal_inferior =   terminal_inferior;
+  gnu_ops.to_terminal_ours_for_output =   terminal_ours_for_output;
+  gnu_ops.to_terminal_ours  =   terminal_ours;
+  gnu_ops.to_terminal_info  =   child_terminal_info;	
+  gnu_ops.to_kill  =   gnu_kill_inferior;	/* to_kill */
+  gnu_ops.to_load  =   0;			/* to_load */
+  gnu_ops.to_lookup_symbol =   0;		/* to_lookup_symbol */
+  gnu_ops.to_create_inferior =   gnu_create_inferior;	/* to_create_inferior */
+  gnu_ops.to_post_startup_inferior = NULL;      /* to_post_startup_inferior */
+  gnu_ops.to_acknowledge_created_inferior = NULL; /* to_acknowledge_created_inferior */
+  gnu_ops.to_clone_and_follow_inferior = NULL;    /* to_clone_and_follow_inferior */
+  gnu_ops.to_post_follow_inferior_by_clone = NULL; /* to_post_follow_inferior_by_clone */
+  gnu_ops.to_insert_fork_catchpoint = NULL;
+  gnu_ops.to_remove_fork_catchpoint = NULL;
+  gnu_ops.to_insert_vfork_catchpoint = NULL;
+  gnu_ops.to_remove_vfork_catchpoint = NULL;
+  gnu_ops.to_has_forked = NULL;                    /* to_has_forked */
+  gnu_ops.to_has_vforked = NULL;                   /* to_has_vforked */
+  gnu_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  gnu_ops.to_post_follow_vfork = NULL;             /* to_post_follow_vfork */
+  gnu_ops.to_insert_exec_catchpoint = NULL;
+  gnu_ops.to_remove_exec_catchpoint = NULL;
+  gnu_ops.to_has_execd = NULL;
+  gnu_ops.to_reported_exec_events_per_exec_call = NULL;
+  gnu_ops.to_has_exited = NULL;
+  gnu_ops.to_mourn_inferior =   gnu_mourn_inferior; /* to_mourn_inferior */
+  gnu_ops.to_can_run  =   gnu_can_run;		/* to_can_run */
+  gnu_ops.to_notice_signals =   0;		/* to_notice_signals */
+  gnu_ops.to_thread_alive  =   gnu_thread_alive;/* to_thread_alive */
+  gnu_ops.to_stop  =   gnu_stop;		/* to_stop */
+  gnu_ops.to_pid_to_exec_file = gnu_pid_to_exec_file;         /* to_pid_to_exec_file */
+  gnu_ops.to_core_file_to_sym_file = NULL;
+  gnu_ops.to_stratum =   process_stratum;	/* to_stratum */
+  gnu_ops.DONT_USE =   0;			/* to_next */
+  gnu_ops.to_has_all_memory =   1;		/* to_has_all_memory */
+  gnu_ops.to_has_memory =   1;			/* to_has_memory */
+  gnu_ops.to_has_stack =   1;			/* to_has_stack */
+  gnu_ops.to_has_registers =   1;		/* to_has_registers */
+  gnu_ops.to_has_execution =   1;		/* to_has_execution */
+  gnu_ops.to_sections =   0;			/* sections */
+  gnu_ops.to_sections_end =   0;		/* sections_end */
+  gnu_ops.to_magic =   OPS_MAGIC ;		/* to_magic */
+} /* init_gnu_ops */
+
+/* Return printable description of proc.  */
+char *proc_string (struct proc *proc)
+{
+  static char tid_str[80];
+  if (proc_is_task (proc))
+    sprintf (tid_str, "process %d", proc->inf->pid);
+  else
+    sprintf (tid_str, "thread %d.%d",
+	     proc->inf->pid, pid_to_thread_id (proc->tid));
+  return tid_str;
+}
+
+char *
+gnu_target_pid_to_str (int tid)
+{
+  struct inf *inf = current_inferior;
+  struct proc *thread = inf_tid_to_thread (inf, tid);
+
+  if (thread)
+    return proc_string (thread);
+  else
+    {
+      static char tid_str[80];
+      sprintf (tid_str, "bogus thread id %d", tid);
+      return tid_str;
+    }
+}
+
+/* User task commands.  */
+
+struct cmd_list_element *set_task_cmd_list = 0;
+struct cmd_list_element *show_task_cmd_list = 0;
+/* User thread commands.  */
+
+/* Commands with a prefix of `set/show thread'.  */
+extern struct cmd_list_element *thread_cmd_list;
+struct cmd_list_element *set_thread_cmd_list = NULL;
+struct cmd_list_element *show_thread_cmd_list = NULL;
+
+/* Commands with a prefix of `set/show thread default'.  */
+struct cmd_list_element *set_thread_default_cmd_list = NULL;
+struct cmd_list_element *show_thread_default_cmd_list = NULL;
+
+static void
+set_thread_cmd (char *args, int from_tty)
+{
+  printf_unfiltered ("\"set thread\" must be followed by the name of a thread
+property, or \"default\".\n");
+}
+
+static void
+show_thread_cmd (char *args, int from_tty)
+{
+  printf_unfiltered ("\"show thread\" must be followed by the name of a thread property, or \"default\".\n");
+}
+
+static void
+set_thread_default_cmd (char *args, int from_tty)
+{
+  printf_unfiltered ("\"set thread default\" must be followed by the name of a thread property.\n");
+}
+
+static void
+show_thread_default_cmd (char *args, int from_tty)
+{
+  printf_unfiltered ("\"show thread default\" must be followed by the name of a thread property.\n");
+}
+
+static int
+parse_int_arg (char *args, char *cmd_prefix)
+{
+  if (args)
+    {
+      char *arg_end;
+      int val = strtoul (args, &arg_end, 10);
+      if (*args && *arg_end == '\0')
+	return val;
+    }
+  error ("Illegal argument for \"%s\" command, should be an integer.", cmd_prefix);
+}
+
+static int
+_parse_bool_arg (char *args, char *t_val, char *f_val, char *cmd_prefix)
+{
+  if (!args || strcmp (args, t_val) == 0)
+    return 1;
+  else if (strcmp (args, f_val) == 0)
+    return 0;
+  else
+    error ("Illegal argument for \"%s\" command, should be \"%s\" or \"%s\".",
+	   cmd_prefix, t_val, f_val);
+}
+
+#define parse_bool_arg(args, cmd_prefix) \
+  _parse_bool_arg (args, "on", "off", cmd_prefix)
+
+static void
+check_empty (char *args, char *cmd_prefix)
+{
+  if (args)
+    error ("Garbage after \"%s\" command: `%s'", cmd_prefix, args);
+}
+
+/* Returns the alive thread named by INFERIOR_PID, or signals an error.  */
+static struct proc *
+cur_thread ()
+{
+  struct inf *inf = cur_inf ();
+  struct proc *thread = inf_tid_to_thread (inf, inferior_pid);
+  if (!thread)
+    error ("No current thread.");
+  return thread;
+}
+
+/* Returns the current inferior, but signals an error if it has no task.  */
+static struct inf *
+active_inf ()
+{
+  struct inf *inf = cur_inf ();
+  if (! inf->task)
+    error ("No current process.");
+  return inf;
+}
+
+static void
+set_task_pause_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  int old_sc = inf->pause_sc;
+
+  inf->pause_sc = parse_bool_arg (args, "set task pause");
+
+  if (old_sc == 0 && inf->pause_sc != 0)
+    /* If the task is currently unsuspended, immediately suspend it,
+       otherwise wait until the next time it gets control.  */
+    inf_suspend (inf);
+}
+
+static void
+show_task_pause_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  check_empty (args, "show task pause");
+  printf_unfiltered ("The inferior task %s suspended while gdb has control.\n",
+		     inf->task
+		     ? (inf->pause_sc == 0 ? "isn't" : "is")
+		     : (inf->pause_sc == 0 ? "won't be" : "will be"));
+}
+
+static void
+set_task_detach_sc_cmd (char *args, int from_tty)
+{
+  cur_inf ()->detach_sc = parse_int_arg (args, "set task detach-suspend-count");
+}
+
+static void
+show_task_detach_sc_cmd (char *args, int from_tty)
+{
+  check_empty (args, "show task detach-suspend-count");
+  printf_unfiltered ("The inferior task will be left with a suspend count of %d when detaching.\n",
+		     cur_inf ()->detach_sc);
+}
+
+static void
+set_thread_default_pause_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  inf->default_thread_pause_sc =
+    parse_bool_arg (args, "set thread default pause") ? 0 : 1;
+}
+
+static void
+show_thread_default_pause_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  int sc = inf->default_thread_pause_sc;
+  check_empty (args, "show thread default pause");
+  printf_unfiltered ("New threads %s suspended while gdb has control%s.\n",
+		     sc ? "are" : "aren't",
+		     !sc && inf->pause_sc ? " (but the task is)" : "");
+}
+
+static void
+set_thread_default_run_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  inf->default_thread_run_sc =
+    parse_bool_arg (args, "set thread default run") ? 0 : 1;
+}
+
+static void
+show_thread_default_run_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  check_empty (args, "show thread default run");
+  printf_unfiltered ("New threads %s allowed to run.\n",
+		     inf->default_thread_run_sc == 0 ? "are" : "aren't");
+}
+
+static void
+set_thread_default_detach_sc_cmd (char *args, int from_tty)
+{
+  cur_inf ()->default_thread_detach_sc =
+    parse_int_arg (args, "set thread default detach-suspend-count");
+}
+
+static void
+show_thread_default_detach_sc_cmd (char *args, int from_tty)
+{
+  check_empty (args, "show thread default detach-suspend-count");
+  printf_unfiltered ("New threads will get a detach-suspend-count of %d.\n",
+		     cur_inf ()->default_thread_detach_sc);
+}
+
+/* Steal a send right called NAME in the inferior task, and make it PROC's
+   saved exception port.  */
+static void
+steal_exc_port (struct proc *proc, mach_port_t name)
+{
+  error_t err;
+  mach_port_t port;
+  mach_msg_type_name_t port_type;
+
+  if (!proc || !proc->inf->task)
+    error ("No inferior task.");
+
+  err = mach_port_extract_right (proc->inf->task->port,
+				 name, MACH_MSG_TYPE_COPY_SEND,
+				 &port, &port_type);
+  if (err)
+    error ("Couldn't extract send right %d from inferior: %s",
+	   name, strerror (err));
+
+  if (proc->saved_exc_port)
+    /* Get rid of our reference to the old one.  */
+    mach_port_deallocate (mach_task_self (), proc->saved_exc_port);
+
+  proc->saved_exc_port = port;
+
+  if (! proc->exc_port)
+    /* If PROC is a thread, we may not have set its exception port before.
+       We can't use proc_steal_exc_port because it also sets saved_exc_port. */
+    {
+       proc->exc_port = proc->inf->event_port;
+       err = proc_set_exception_port (proc, proc->exc_port);
+       error ("Can't set exception port for %s: %s",
+	      proc_string (proc), strerror (err));
+    }
+}
+
+static void
+set_task_exc_port_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  if (!args)
+    error ("No argument to \"set task exception-port\" command.");
+  steal_exc_port (inf->task, parse_and_eval_address (args));
+}
+
+static void 
+set_stopped_cmd (char *args, int from_tty)
+{
+  cur_inf ()->stopped = _parse_bool_arg (args, "yes", "no", "set stopped");
+}
+
+static void
+show_stopped_cmd (char *args, int from_tty)
+{
+  struct inf *inf = active_inf ();
+  check_empty (args, "show stopped");
+  printf_unfiltered ("The inferior process %s stopped.\n",
+		     inf->stopped ? "is" : "isn't");
+}
+
+static void 
+set_sig_thread_cmd (char *args, int from_tty)
+{
+  int tid;
+  struct inf *inf = cur_inf ();
+
+  if (!args || (! isdigit (*args) && strcmp (args, "none") != 0))
+    error ("Illegal argument to \"set signal-thread\" command.\n"
+	   "Should be an integer thread ID, or `none'.");
+
+  if (strcmp (args, "none") == 0)
+    inf->signal_thread = 0;
+  else
+    {
+      int tid = thread_id_to_pid (atoi (args));
+      if (tid < 0)
+	error ("Thread ID %s not known.  Use the \"info threads\" command to\n"
+	       "see the IDs of currently known threads.", args);
+      inf->signal_thread = inf_tid_to_thread (inf, tid);
+    }
+}
+
+static void
+show_sig_thread_cmd (char *args, int from_tty)
+{
+  struct inf *inf = active_inf ();
+  check_empty (args, "show signal-thread");
+  if (inf->signal_thread)
+    printf_unfiltered ("The signal thread is %s.\n",
+		       proc_string (inf->signal_thread));
+  else
+    printf_unfiltered ("There is no signal thread.\n");
+}
+
+static void 
+set_signals_cmd (char *args, int from_tty)
+{
+  int trace;
+  struct inf *inf = cur_inf ();
+
+  inf->want_signals = parse_bool_arg (args, "set signals");
+
+  if (inf->task && inf->want_signals != inf->traced)
+    /* Make this take effect immediately in a running process.  */
+    inf_set_traced (inf, inf->want_signals);
+}
+
+static void
+show_signals_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  check_empty (args, "show signals");
+  printf_unfiltered ("The inferior process's signals %s intercepted.\n",
+		     inf->task
+		     ? (inf->traced ? "are" : "aren't")
+		     : (inf->want_signals ? "will be" : "won't be"));
+}
+
+static void 
+set_exceptions_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  int val = parse_bool_arg (args, "set exceptions");
+
+  if (inf->task && inf->want_exceptions != val)
+    /* Make this take effect immediately in a running process.  */
+    /* XXX */;
+
+  inf->want_exceptions = val;
+}
+
+static void
+show_exceptions_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+  check_empty (args, "show exceptions");
+  printf_unfiltered ("Exceptions in the inferior %s trapped.\n",
+		     inf->task
+		     ? (inf->want_exceptions ? "are" : "aren't")
+		     : (inf->want_exceptions ? "will be" : "won't be"));
+}
+
+static void
+set_task_cmd (char *args, int from_tty)
+{
+  printf_unfiltered ("\"set task\" must be followed by the name of a task property.\n");
+}
+
+static void
+show_task_cmd (char *args, int from_tty)
+{
+  struct inf *inf = cur_inf ();
+
+  check_empty (args, "show task");
+
+  show_signals_cmd (0, from_tty);
+  show_exceptions_cmd (0, from_tty);
+  show_task_pause_cmd (0, from_tty);
+
+  if (inf->pause_sc == 0)
+    show_thread_default_pause_cmd (0, from_tty);
+  show_thread_default_run_cmd (0, from_tty);
+
+  if (inf->task)
+    {
+      show_stopped_cmd (0, from_tty);
+      show_sig_thread_cmd (0, from_tty);
+    }
+
+  if (inf->detach_sc != 0)
+    show_task_detach_sc_cmd (0, from_tty);
+  if (inf->default_thread_detach_sc != 0)
+    show_thread_default_detach_sc_cmd (0, from_tty);
+}
+
+static void
+set_noninvasive_cmd (char *args, int from_tty)
+{
+  /* Invert the sense of the arg for each component.  */
+  char *inv_args = parse_bool_arg (args, "set noninvasive") ? "off" : "on";
+
+  set_task_pause_cmd (inv_args, from_tty);
+  set_signals_cmd (inv_args, from_tty);
+  set_exceptions_cmd (inv_args, from_tty);
+}
+
+static void
+info_port_rights (char *args, mach_port_type_t only)
+{
+  struct inf *inf = active_inf ();
+  value_ptr vmark = value_mark ();
+
+  if (args)
+    /* Explicit list of port rights.  */
+    {
+      while (*args)
+	{
+	  value_ptr val = parse_to_comma_and_eval (&args);
+	  long right = value_as_long (val);
+	  error_t err =
+	    print_port_info (right, 0, inf->task->port, PORTINFO_DETAILS,
+			     stdout);
+	  if (err)
+	    error ("%ld: %s.", right, strerror (err));
+	}
+    }
+  else
+    /* Print all of them.  */
+    {
+      error_t err =
+	print_task_ports_info (inf->task->port, only, PORTINFO_DETAILS,
+			       stdout);
+      if (err)
+	error ("%s.", strerror (err));
+    }
+
+  value_free_to_mark (vmark);
+}
+
+static void
+info_send_rights_cmd (char *args, int from_tty)
+{
+  info_port_rights (args, MACH_PORT_TYPE_SEND);
+}
+static void
+info_recv_rights_cmd (char *args, int from_tty)
+{
+  info_port_rights (args, MACH_PORT_TYPE_RECEIVE);
+}
+static void
+info_port_sets_cmd (char *args, int from_tty)
+{
+  info_port_rights (args, MACH_PORT_TYPE_PORT_SET);
+}
+static void
+info_dead_names_cmd (char *args, int from_tty)
+{
+  info_port_rights (args, MACH_PORT_TYPE_DEAD_NAME);
+}
+static void
+info_port_rights_cmd (char *args, int from_tty)
+{
+  info_port_rights (args, ~0);
+}
+
+static void add_task_commands ()
+{
+  add_cmd ("pause", class_run, set_thread_default_pause_cmd,
+	   "Set whether the new threads are suspended while gdb has control.\n"
+	   "This property normally has no effect because the whole task is\n"
+	   "suspended, however, that may be disabled with \"set task pause off\".\n"
+	   "The default value is \"off\".",
+	   &set_thread_default_cmd_list);
+  add_cmd ("pause", no_class, show_thread_default_pause_cmd,
+	   "Show whether new threads are suspended while gdb has control.",
+	   &show_thread_default_cmd_list);
+  add_cmd ("run", class_run, set_thread_default_run_cmd,
+	   "Set whether new threads are allowed to run (once gdb has noticed them).",
+	   &set_thread_default_cmd_list);
+  add_cmd ("run", no_class, show_thread_default_run_cmd,
+	   "Show whether new threads are allowed to run (once gdb has noticed
+them).",
+	   &show_thread_default_cmd_list);
+  add_cmd ("detach-suspend-count", class_run, set_thread_default_detach_sc_cmd,
+	   "Set the default detach-suspend-count value for new threads.",
+	   &set_thread_default_cmd_list);
+  add_cmd ("detach-suspend-count", no_class, show_thread_default_detach_sc_cmd,
+	   "Show the default detach-suspend-count value for new threads.",
+	   &show_thread_default_cmd_list);
+
+  add_cmd ("signals", class_run, set_signals_cmd,
+	   "Set whether the inferior process's signals will be intercepted.\n"
+	   "Mach exceptions (such as breakpoint traps) are not affected.",
+	   &setlist);
+  add_alias_cmd ("sigs", "signals", class_run, 1, &setlist);
+  add_cmd ("signals", no_class, show_signals_cmd,
+	   "Show whether the inferior process's signals will be intercepted.",
+	   &showlist);
+  add_alias_cmd ("sigs", "signals", no_class, 1, &showlist);
+
+  add_cmd ("signal-thread", class_run, set_sig_thread_cmd,
+	   "Set the thread that gdb thinks is the libc signal thread.\n"
+	   "This thread is run when delivering a signal to a non-stopped process.",
+	   &setlist);
+  add_alias_cmd ("sigthread", "signal-thread", class_run, 1, &setlist);
+  add_cmd ("signal-thread", no_class, show_sig_thread_cmd,
+	   "Set the thread that gdb thinks is the libc signal thread.",
+	   &showlist);
+  add_alias_cmd ("sigthread", "signal-thread", no_class, 1, &showlist);
+
+  add_cmd ("stopped", class_run, set_stopped_cmd,
+	   "Set whether gdb thinks the inferior process is stopped as with SIGSTOP.\n"
+	   "Stopped process will be continued by sending them a signal.",
+	   &setlist);
+  add_cmd ("stopped", no_class, show_signals_cmd,
+	   "Show whether gdb thinks the inferior process is stopped as with SIGSTOP.",
+	   &showlist);
+
+  add_cmd ("exceptions", class_run, set_exceptions_cmd,
+	   "Set whether exceptions in the inferior process will be trapped.\n"
+	   "When exceptions are turned off, neither breakpoints nor single-stepping\n"
+	   "will work.",
+	   &setlist);
+  /* Allow `set exc' despite conflict with `set exception-port'.  */
+  add_alias_cmd ("exc", "exceptions", class_run, 1, &setlist);
+  add_cmd ("exceptions", no_class, show_exceptions_cmd,
+	   "Show whether exceptions in the inferior process will be trapped.",
+	   &showlist);
+
+  add_prefix_cmd ("task", no_class, set_task_cmd,
+		  "Command prefix for setting task attributes.",
+		  &set_task_cmd_list, "set task ", 0, &setlist);
+  add_prefix_cmd ("task", no_class, show_task_cmd,
+		  "Command prefix for showing task attributes.",
+		  &show_task_cmd_list, "show task ", 0, &showlist);
+
+  add_cmd ("pause", class_run, set_task_pause_cmd,
+	   "Set whether the task is suspended while gdb has control.\n"
+	   "A value of \"on\" takes effect immediately, otherwise nothing\n"
+	   "happens until the next time the program is continued.\n"
+	   "When setting this to \"off\", \"set thread default pause on\"\n"
+	   "can be used to pause individual threads by default instead.",
+	   &set_task_cmd_list);
+  add_cmd ("pause", no_class, show_task_pause_cmd,
+	   "Show whether the task is suspended while gdb has control.",
+	   &show_task_cmd_list);
+  add_cmd ("detach-suspend-count", class_run, set_task_detach_sc_cmd,
+	   "Set the suspend count will leave on the thread when detaching.",
+	   &set_task_cmd_list);
+  add_cmd ("detach-suspend-count", no_class, show_task_detach_sc_cmd,
+	   "Show the suspend count will leave on the thread when detaching.",
+	   &show_task_cmd_list);
+
+  add_cmd ("exception-port", no_class, set_task_exc_port_cmd,
+	   "Set the task exception port to which we forward exceptions.\n"
+	   "The argument should be the value of the send right in the task.",
+	   &set_task_cmd_list);
+  add_alias_cmd ("excp", "exception-port", no_class, 1, &set_task_cmd_list);
+  add_alias_cmd ("exc-port", "exception-port", no_class, 1, &set_task_cmd_list);
+
+  /* A convenient way of turning on all options require to noninvasively
+     debug running tasks.  */
+  add_cmd ("noninvasive", no_class, set_noninvasive_cmd,
+	   "Set task options so that we interfere as little as possible.\n"
+	   "This is the same as setting `task pause', `exceptions', and"
+	   "`signals' to the opposite value.",
+	   &setlist);
+
+  /* Commands to show information about the task's ports.  */
+  add_cmd ("send-rights", class_info, info_send_rights_cmd,
+	   "Show information about the task's send rights",
+	   &infolist);
+  add_cmd ("receive-rights", class_info, info_recv_rights_cmd,
+	   "Show information about the task's receive rights",
+	   &infolist);
+  add_cmd ("port-rights", class_info, info_send_rights_cmd,
+	   "Show information about the task's port rights",
+	   &infolist);
+  add_cmd ("port-sets", class_info, info_port_sets_cmd,
+	   "Show information about the task's port sets",
+	   &infolist);
+  add_cmd ("dead-names", class_info, info_dead_names_cmd,
+	   "Show information about the task's dead names",
+	   &infolist);
+  add_info_alias ("ports", "port-rights", 1);
+  add_info_alias ("port", "port-rights", 1);
+  add_info_alias ("psets", "port-sets", 1);
+}
+
+
+static void
+set_thread_pause_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  int old_sc = thread->pause_sc;
+  thread->pause_sc = parse_bool_arg (args, "set thread pause");
+  if (old_sc == 0 && thread->pause_sc != 0 && thread->inf->pause_sc == 0)
+    /* If the task is currently unsuspended, immediately suspend it,
+       otherwise wait until the next time it gets control.  */
+    inf_suspend (thread->inf);
+}
+
+static void
+show_thread_pause_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  int sc = thread->pause_sc;
+  check_empty (args, "show task pause");
+  printf_unfiltered ("Thread %s %s suspended while gdb has control%s.\n",
+		     proc_string (thread),
+		     sc ? "is" : "isn't",
+		     !sc && thread->inf->pause_sc ? " (but the task is)" : "");
+}
+
+static void
+set_thread_run_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  thread->run_sc = parse_bool_arg (args, "set thread run") ? 0 : 1;
+}
+
+static void
+show_thread_run_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  check_empty (args, "show thread run");
+  printf_unfiltered ("Thread %s %s allowed to run.",
+		     proc_string (thread),
+		     thread->run_sc == 0 ? "is" : "isn't");
+}
+
+static void
+set_thread_detach_sc_cmd (char *args, int from_tty)
+{
+  cur_thread ()->detach_sc = parse_int_arg (args, "set thread detach-suspend-count");
+}
+
+static void
+show_thread_detach_sc_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  check_empty (args, "show thread detach-suspend-count");
+  printf_unfiltered ("Thread %s will be left with a suspend count of %d when detaching.\n",
+		     proc_string (thread),
+		     thread->detach_sc);
+}
+
+static void
+set_thread_exc_port_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  if (!args)
+    error ("No argument to \"set thread exception-port\" command.");
+  steal_exc_port (thread, parse_and_eval_address (args));
+}
+
+#if 0
+static void
+show_thread_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  check_empty (args, "show thread");
+  show_thread_run_cmd (0, from_tty);
+  show_thread_pause_cmd (0, from_tty);
+  if (thread->detach_sc != 0)
+    show_thread_detach_sc_cmd (0, from_tty);
+}
+#endif
+
+static void
+thread_takeover_sc_cmd (char *args, int from_tty)
+{
+  struct proc *thread = cur_thread ();
+  thread_basic_info_data_t _info;
+  thread_basic_info_t info = &_info;
+  mach_msg_type_number_t info_len = THREAD_BASIC_INFO_COUNT;
+  error_t err =
+    thread_info (thread->port, THREAD_BASIC_INFO, (int *)&info, &info_len);
+  if (err)
+    error ("%s.", strerror (err));
+  thread->sc = info->suspend_count;
+  if (from_tty)
+    printf_unfiltered ("Suspend count was %d.\n", thread->sc);
+  if (info != &_info)
+    vm_deallocate (mach_task_self (), (vm_address_t)info, info_len * sizeof (int));
+}
+
+add_thread_commands ()
+{
+  add_prefix_cmd ("thread", no_class, set_thread_cmd,
+		  "Command prefix for setting thread properties.",
+		  &set_thread_cmd_list, "set thread ", 0, &setlist);
+  add_prefix_cmd ("default", no_class, show_thread_cmd,
+		  "Command prefix for setting default thread properties.",
+		  &set_thread_default_cmd_list, "set thread default ", 0,
+		  &set_thread_cmd_list);
+  add_prefix_cmd ("thread", no_class, set_thread_default_cmd,
+		  "Command prefix for showing thread properties.",
+		  &show_thread_cmd_list, "show thread ", 0, &showlist);
+  add_prefix_cmd ("default", no_class, show_thread_default_cmd,
+		  "Command prefix for showing default thread properties.",
+		  &show_thread_default_cmd_list, "show thread default ", 0,
+		  &show_thread_cmd_list);
+
+  add_cmd ("pause", class_run, set_thread_pause_cmd,
+	   "Set whether the current thread is suspended while gdb has control.\n"
+	   "A value of \"on\" takes effect immediately, otherwise nothing\n"
+	   "happens until the next time the program is continued.  This\n"
+	   "property normally has no effect because the whole task is suspended,\n"
+	   "however, that may be disabled with \"set task pause off\".\n"
+	   "The default value is \"off\".",
+	   &set_thread_cmd_list);
+  add_cmd ("pause", no_class, show_thread_pause_cmd,
+	   "Show whether the current thread is suspended while gdb has control.",
+	   &show_thread_cmd_list);
+
+  add_cmd ("run", class_run, set_thread_run_cmd,
+	   "Set whether the current thread is allowed to run.",
+	   &set_thread_cmd_list);
+  add_cmd ("run", no_class, show_thread_run_cmd,
+	   "Show whether the current thread is allowed to run.",
+	   &show_thread_cmd_list);
+
+  add_cmd ("detach-suspend-count", class_run, set_thread_detach_sc_cmd,
+	   "Set the suspend count will leave on the thread when detaching.\n"
+	   "Note that this is relative to suspend count when gdb noticed the thread;\n"
+	   "use the `thread takeover-suspend-count' to force it to an absolute value.",
+	   &set_thread_cmd_list);
+  add_cmd ("detach-suspend-count", no_class, show_thread_detach_sc_cmd,
+	   "Show the suspend count will leave on the thread when detaching."
+	   "Note that this is relative to suspend count when gdb noticed the thread;\n"
+	   "use the `thread takeover-suspend-count' to force it to an absolute value.",
+	   &show_thread_cmd_list);
+
+  add_cmd ("exception-port", no_class, set_thread_exc_port_cmd,
+	   "Set the exception port to which we forward exceptions for the\n"
+	   "current thread, overriding the task exception port.\n"
+	   "The argument should be the value of the send right in the task.",
+	   &set_thread_cmd_list);
+  add_alias_cmd ("excp", "exception-port", no_class, 1, &set_thread_cmd_list);
+  add_alias_cmd ("exc-port", "exception-port", no_class, 1, &set_thread_cmd_list);
+
+  add_cmd ("takeover-suspend-count", no_class, thread_takeover_sc_cmd,
+	   "Force the threads absolute suspend-count to be gdb's.\n"
+	   "Prior to giving this command, gdb's thread suspend-counts are relative to\n"
+	   "the thread's initial suspend-count when gdb notices the threads.",
+	   &thread_cmd_list);
+}
+
+void
+_initialize_gnu_nat ()
+{
+  proc_server = getproc ();
+  init_gnu_ops() ;
+  add_target (&gnu_ops);
+  add_task_commands ();
+  add_thread_commands ();
+
+#if MAINTENANCE_CMDS
+  add_set_cmd ("gnu-debug", class_maintenance,
+	       var_boolean, (char *)&gnu_debug_flag,
+	       "Set debugging output for the gnu backend.", &maintenancelist);
+#endif
+}
+
+#ifdef	FLUSH_INFERIOR_CACHE
+
+/* When over-writing code on some machines the I-Cache must be flushed
+   explicitly, because it is not kept coherent by the lazy hardware.
+   This definitely includes breakpoints, for instance, or else we
+   end up looping in mysterious Bpt traps */
+
+void
+flush_inferior_icache(pc, amount)
+     CORE_ADDR pc;
+{
+  vm_machine_attribute_val_t flush = MATTR_VAL_ICACHE_FLUSH;
+  error_t   ret;
+  
+  ret = vm_machine_attribute (current_inferior->task->port,
+			      pc,
+			      amount,
+			      MATTR_CACHE,
+			      &flush);
+  if (ret != KERN_SUCCESS)
+    warning ("Error flushing inferior's cache : %s", strerror (ret));
+}
+#endif	FLUSH_INFERIOR_CACHE
diff --git a/gdb/gnu-nat.h b/gdb/gnu-nat.h
new file mode 100644
index 0000000..d238dc0
--- /dev/null
+++ b/gdb/gnu-nat.h
@@ -0,0 +1,93 @@
+/* Common things used by the various *gnu-nat.c files
+   Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+
+Written by Miles Bader <miles@gnu.ai.mit.edu>
+
+The GNU Hurd is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2, or (at
+your option) any later version.
+
+The GNU Hurd is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef __GNU_NAT_H__
+#define __GNU_NAT_H__
+
+#include <unistd.h>
+#include <mach.h>
+
+struct inf;
+
+extern struct inf *current_inferior;
+
+/* Converts a GDB pid to a struct proc.  */
+struct proc *inf_tid_to_thread (struct inf *inf, int tid);
+
+/* A proc is either a thread, or the task (there can only be one task proc
+   because it always has the same TID, PROC_TID_TASK).  */
+struct proc
+{
+  thread_t port;		/* The task or thread port.  */
+  int tid;			/* The GDB pid (actually a thread id).  */
+  int num;			/* An id number for threads, to print.  */
+
+  mach_port_t saved_exc_port;	/* The task/thread's real exception port.  */
+  mach_port_t exc_port;		/* Our replacement, which for.  */
+
+  int sc;			/* Desired suspend count.   */
+  int cur_sc;			/* Implemented suspend count.  */
+  int run_sc;			/* Default sc when the program is running. */
+  int pause_sc;			/* Default sc when gdb has control. */
+  int resume_sc;		/* Sc resulting from the last resume. */
+  int detach_sc;		/* SC to leave around when detaching
+				   from program. */
+
+  thread_state_data_t state;	/* Registers, &c. */
+  int state_valid : 1;		/* True if STATE is up to date. */
+  int state_changed : 1;
+
+  int aborted : 1;		/* True if thread_abort has been called.  */
+  int dead : 1;			/* We happen to know it's actually dead. */
+
+  /* Bit mask of registers fetched by gdb.  This is used when we re-fetch
+     STATE after aborting the thread, to detect that gdb may have out-of-date
+     information.  */
+  unsigned long fetched_regs;
+
+  struct inf *inf;		/* Where we come from.  */
+
+  struct proc *next;
+};
+
+/* The task has a thread entry with this TID.  */
+#define PROC_TID_TASK 	(-1)
+
+#define proc_is_task(proc) ((proc)->tid == PROC_TID_TASK)
+#define proc_is_thread(proc) ((proc)->tid != PROC_TID_TASK)
+
+extern int __proc_pid (struct proc *proc);
+
+extern thread_state_t proc_get_state (struct proc *proc, int will_modify);
+
+#define proc_debug(_proc, msg, args...) \
+  do { struct proc *__proc = (_proc); \
+       debug ("{proc %d/%d %p}: " msg, \
+	      __proc_pid (__proc), __proc->tid, __proc , ##args); } while (0)
+
+#if MAINTENANCE_CMDS
+extern int gnu_debug_flag;
+#define debug(msg, args...) \
+ do { if (gnu_debug_flag) \
+        fprintf (stderr, "%s: " msg "\r\n", __FUNCTION__ , ##args); } while (0)
+#else
+#define debug(msg, args...) (void)0
+#endif
+
+#endif /* __GNU_NAT_H__ */
diff --git a/gdb/gnu-regex.c b/gdb/gnu-regex.c
new file mode 100644
index 0000000..84db70f
--- /dev/null
+++ b/gdb/gnu-regex.c
@@ -0,0 +1,5797 @@
+/* Extended regular expression matching and search library,
+   version 0.12.
+   (Implements POSIX draft P1003.2/D11.2, except for some of the
+   internationalization features.)
+   Copyright (C) 1993, 94, 95, 96, 97, 98 Free Software Foundation, Inc.
+
+   NOTE: The canonical source of this file is maintained with the 
+   GNU C Library.  Bugs can be reported to bug-glibc@prep.ai.mit.edu.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation, 
+   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* AIX requires this to be the first thing in the file. */
+#if defined _AIX && !defined REGEX_MALLOC
+  #pragma alloca
+#endif
+
+#undef	_GNU_SOURCE
+#define _GNU_SOURCE
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifndef PARAMS
+# if defined __GNUC__ || (defined __STDC__ && __STDC__)
+#  define PARAMS(args) args
+# else
+#  define PARAMS(args) ()
+# endif  /* GCC.  */
+#endif  /* Not PARAMS.  */
+
+#if defined STDC_HEADERS && !defined emacs
+# include <stddef.h>
+#else
+/* We need this for `gnu-regex.h', and perhaps for the Emacs include files.  */
+# include <sys/types.h>
+#endif
+
+/* For platform which support the ISO C amendement 1 functionality we
+   support user defined character classes.  */
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+ /* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>.  */
+# include <wchar.h>
+# include <wctype.h>
+#endif
+
+/* This is for other GNU distributions with internationalized messages.  */
+/* CYGNUS LOCAL: ../intl will handle this for us */
+#ifdef ENABLE_NLS
+# include <libintl.h>
+#else
+# define gettext(msgid) (msgid)
+#endif
+
+#ifndef gettext_noop
+/* This define is so xgettext can find the internationalizable
+   strings.  */
+# define gettext_noop(String) String
+#endif
+
+/* The `emacs' switch turns on certain matching commands
+   that make sense only in Emacs. */
+#ifdef emacs
+
+# include "lisp.h"
+# include "buffer.h"
+# include "syntax.h"
+
+#else  /* not emacs */
+
+/* If we are not linking with Emacs proper,
+   we can't use the relocating allocator
+   even if config.h says that we can.  */
+# undef REL_ALLOC
+
+# if defined STDC_HEADERS || defined _LIBC
+#  include <stdlib.h>
+# else
+char *malloc ();
+char *realloc ();
+# endif
+
+/* When used in Emacs's lib-src, we need to get bzero and bcopy somehow.
+   If nothing else has been done, use the method below.  */
+# ifdef INHIBIT_STRING_HEADER
+#  if !(defined HAVE_BZERO && defined HAVE_BCOPY)
+#   if !defined bzero && !defined bcopy
+#    undef INHIBIT_STRING_HEADER
+#   endif
+#  endif
+# endif
+
+/* This is the normal way of making sure we have a bcopy and a bzero.
+   This is used in most programs--a few other programs avoid this
+   by defining INHIBIT_STRING_HEADER.  */
+# ifndef INHIBIT_STRING_HEADER
+#  if defined HAVE_STRING_H || defined STDC_HEADERS || defined _LIBC
+#   include <string.h>
+#   ifndef bzero
+#    ifndef _LIBC
+#     define bzero(s, n)	(memset (s, '\0', n), (s))
+#    else
+#     define bzero(s, n)	__bzero (s, n)
+#    endif
+#   endif
+#  else
+#   include <strings.h>
+#   ifndef memcmp
+#    define memcmp(s1, s2, n)	bcmp (s1, s2, n)
+#   endif
+#   ifndef memcpy
+#    define memcpy(d, s, n)	(bcopy (s, d, n), (d))
+#   endif
+#  endif
+# endif
+
+/* Define the syntax stuff for \<, \>, etc.  */
+
+/* This must be nonzero for the wordchar and notwordchar pattern
+   commands in re_match_2.  */
+# ifndef Sword
+#  define Sword 1
+# endif
+
+# ifdef SWITCH_ENUM_BUG
+#  define SWITCH_ENUM_CAST(x) ((int)(x))
+# else
+#  define SWITCH_ENUM_CAST(x) (x)
+# endif
+
+/* How many characters in the character set.  */
+# define CHAR_SET_SIZE 256
+
+/* GDB LOCAL: define _REGEX_RE_COMP to get BSD style re_comp and re_exec */
+#ifndef _REGEX_RE_COMP
+#define _REGEX_RE_COMP
+#endif
+
+# ifdef SYNTAX_TABLE
+
+extern char *re_syntax_table;
+
+# else /* not SYNTAX_TABLE */
+
+static char re_syntax_table[CHAR_SET_SIZE];
+
+static void
+init_syntax_once ()
+{
+   register int c;
+   static int done = 0;
+
+   if (done)
+     return;
+
+   bzero (re_syntax_table, sizeof re_syntax_table);
+
+   for (c = 'a'; c <= 'z'; c++)
+     re_syntax_table[c] = Sword;
+
+   for (c = 'A'; c <= 'Z'; c++)
+     re_syntax_table[c] = Sword;
+
+   for (c = '0'; c <= '9'; c++)
+     re_syntax_table[c] = Sword;
+
+   re_syntax_table['_'] = Sword;
+
+   done = 1;
+}
+
+# endif /* not SYNTAX_TABLE */
+
+# define SYNTAX(c) re_syntax_table[c]
+
+#endif /* not emacs */
+
+/* Get the interface, including the syntax bits.  */
+/* CYGNUS LOCAL: call it gnu-regex.h, not regex.h, to avoid name conflicts */
+#include "gnu-regex.h"
+
+/* isalpha etc. are used for the character classes.  */
+#include <ctype.h>
+
+/* Jim Meyering writes:
+
+   "... Some ctype macros are valid only for character codes that
+   isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
+   using /bin/cc or gcc but without giving an ansi option).  So, all
+   ctype uses should be through macros like ISPRINT...  If
+   STDC_HEADERS is defined, then autoconf has verified that the ctype
+   macros don't need to be guarded with references to isascii. ...
+   Defining isascii to 1 should let any compiler worth its salt
+   eliminate the && through constant folding."
+   Solaris defines some of these symbols so we must undefine them first.  */
+
+#undef ISASCII
+#if defined STDC_HEADERS || (!defined isascii && !defined HAVE_ISASCII)
+# define ISASCII(c) 1
+#else
+# define ISASCII(c) isascii(c)
+#endif
+
+#ifdef isblank
+# define ISBLANK(c) (ISASCII (c) && isblank (c))
+#else
+# define ISBLANK(c) ((c) == ' ' || (c) == '\t')
+#endif
+#ifdef isgraph
+# define ISGRAPH(c) (ISASCII (c) && isgraph (c))
+#else
+# define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
+#endif
+
+#undef ISPRINT
+#define ISPRINT(c) (ISASCII (c) && isprint (c))
+#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
+#define ISALNUM(c) (ISASCII (c) && isalnum (c))
+#define ISALPHA(c) (ISASCII (c) && isalpha (c))
+#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
+#define ISLOWER(c) (ISASCII (c) && islower (c))
+#define ISPUNCT(c) (ISASCII (c) && ispunct (c))
+#define ISSPACE(c) (ISASCII (c) && isspace (c))
+#define ISUPPER(c) (ISASCII (c) && isupper (c))
+#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+
+#ifndef NULL
+# define NULL (void *)0
+#endif
+
+/* We remove any previous definition of `SIGN_EXTEND_CHAR',
+   since ours (we hope) works properly with all combinations of
+   machines, compilers, `char' and `unsigned char' argument types.
+   (Per Bothner suggested the basic approach.)  */
+#undef SIGN_EXTEND_CHAR
+#if __STDC__
+# define SIGN_EXTEND_CHAR(c) ((signed char) (c))
+#else  /* not __STDC__ */
+/* As in Harbison and Steele.  */
+# define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
+#endif
+
+/* Should we use malloc or alloca?  If REGEX_MALLOC is not defined, we
+   use `alloca' instead of `malloc'.  This is because using malloc in
+   re_search* or re_match* could cause memory leaks when C-g is used in
+   Emacs; also, malloc is slower and causes storage fragmentation.  On
+   the other hand, malloc is more portable, and easier to debug.
+
+   Because we sometimes use alloca, some routines have to be macros,
+   not functions -- `alloca'-allocated space disappears at the end of the
+   function it is called in.  */
+
+#ifdef REGEX_MALLOC
+
+# define REGEX_ALLOCATE malloc
+# define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
+# define REGEX_FREE free
+
+#else /* not REGEX_MALLOC  */
+
+/* Emacs already defines alloca, sometimes.  */
+# ifndef alloca
+
+/* Make alloca work the best possible way.  */
+#  ifdef __GNUC__
+#   define alloca __builtin_alloca
+#  else /* not __GNUC__ */
+#   if HAVE_ALLOCA_H
+#    include <alloca.h>
+#   endif /* HAVE_ALLOCA_H */
+#  endif /* not __GNUC__ */
+
+# endif /* not alloca */
+
+# define REGEX_ALLOCATE alloca
+
+/* Assumes a `char *destination' variable.  */
+# define REGEX_REALLOCATE(source, osize, nsize)				\
+  (destination = (char *) alloca (nsize),				\
+   memcpy (destination, source, osize))
+
+/* No need to do anything to free, after alloca.  */
+# define REGEX_FREE(arg) ((void)0) /* Do nothing!  But inhibit gcc warning.  */
+
+#endif /* not REGEX_MALLOC */
+
+/* Define how to allocate the failure stack.  */
+
+#if defined REL_ALLOC && defined REGEX_MALLOC
+
+# define REGEX_ALLOCATE_STACK(size)				\
+  r_alloc (&failure_stack_ptr, (size))
+# define REGEX_REALLOCATE_STACK(source, osize, nsize)		\
+  r_re_alloc (&failure_stack_ptr, (nsize))
+# define REGEX_FREE_STACK(ptr)					\
+  r_alloc_free (&failure_stack_ptr)
+
+#else /* not using relocating allocator */
+
+# ifdef REGEX_MALLOC
+
+#  define REGEX_ALLOCATE_STACK malloc
+#  define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
+#  define REGEX_FREE_STACK free
+
+# else /* not REGEX_MALLOC */
+
+#  define REGEX_ALLOCATE_STACK alloca
+
+#  define REGEX_REALLOCATE_STACK(source, osize, nsize)			\
+   REGEX_REALLOCATE (source, osize, nsize)
+/* No need to explicitly free anything.  */
+#  define REGEX_FREE_STACK(arg)
+
+# endif /* not REGEX_MALLOC */
+#endif /* not using relocating allocator */
+
+
+/* True if `size1' is non-NULL and PTR is pointing anywhere inside
+   `string1' or just past its end.  This works if PTR is NULL, which is
+   a good thing.  */
+#define FIRST_STRING_P(ptr) 					\
+  (size1 && string1 <= (ptr) && (ptr) <= string1 + size1)
+
+/* (Re)Allocate N items of type T using malloc, or fail.  */
+#define TALLOC(n, t) ((t *) malloc ((n) * sizeof (t)))
+#define RETALLOC(addr, n, t) ((addr) = (t *) realloc (addr, (n) * sizeof (t)))
+#define RETALLOC_IF(addr, n, t) \
+  if (addr) RETALLOC((addr), (n), t); else (addr) = TALLOC ((n), t)
+#define REGEX_TALLOC(n, t) ((t *) REGEX_ALLOCATE ((n) * sizeof (t)))
+
+#define BYTEWIDTH 8 /* In bits.  */
+
+#define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
+
+#undef MAX
+#undef MIN
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+
+typedef char boolean;
+#define false 0
+#define true 1
+
+static int re_match_2_internal PARAMS ((struct re_pattern_buffer *bufp,
+					const char *string1, int size1,
+					const char *string2, int size2,
+					int pos,
+					struct re_registers *regs,
+					int stop));
+
+/* These are the command codes that appear in compiled regular
+   expressions.  Some opcodes are followed by argument bytes.  A
+   command code can specify any interpretation whatsoever for its
+   arguments.  Zero bytes may appear in the compiled regular expression.  */
+
+typedef enum
+{
+  no_op = 0,
+
+  /* Succeed right away--no more backtracking.  */
+  succeed,
+
+        /* Followed by one byte giving n, then by n literal bytes.  */
+  exactn,
+
+        /* Matches any (more or less) character.  */
+  anychar,
+
+        /* Matches any one char belonging to specified set.  First
+           following byte is number of bitmap bytes.  Then come bytes
+           for a bitmap saying which chars are in.  Bits in each byte
+           are ordered low-bit-first.  A character is in the set if its
+           bit is 1.  A character too large to have a bit in the map is
+           automatically not in the set.  */
+  charset,
+
+        /* Same parameters as charset, but match any character that is
+           not one of those specified.  */
+  charset_not,
+
+        /* Start remembering the text that is matched, for storing in a
+           register.  Followed by one byte with the register number, in
+           the range 0 to one less than the pattern buffer's re_nsub
+           field.  Then followed by one byte with the number of groups
+           inner to this one.  (This last has to be part of the
+           start_memory only because we need it in the on_failure_jump
+           of re_match_2.)  */
+  start_memory,
+
+        /* Stop remembering the text that is matched and store it in a
+           memory register.  Followed by one byte with the register
+           number, in the range 0 to one less than `re_nsub' in the
+           pattern buffer, and one byte with the number of inner groups,
+           just like `start_memory'.  (We need the number of inner
+           groups here because we don't have any easy way of finding the
+           corresponding start_memory when we're at a stop_memory.)  */
+  stop_memory,
+
+        /* Match a duplicate of something remembered. Followed by one
+           byte containing the register number.  */
+  duplicate,
+
+        /* Fail unless at beginning of line.  */
+  begline,
+
+        /* Fail unless at end of line.  */
+  endline,
+
+        /* Succeeds if at beginning of buffer (if emacs) or at beginning
+           of string to be matched (if not).  */
+  begbuf,
+
+        /* Analogously, for end of buffer/string.  */
+  endbuf,
+
+        /* Followed by two byte relative address to which to jump.  */
+  jump,
+
+	/* Same as jump, but marks the end of an alternative.  */
+  jump_past_alt,
+
+        /* Followed by two-byte relative address of place to resume at
+           in case of failure.  */
+  on_failure_jump,
+
+        /* Like on_failure_jump, but pushes a placeholder instead of the
+           current string position when executed.  */
+  on_failure_keep_string_jump,
+
+        /* Throw away latest failure point and then jump to following
+           two-byte relative address.  */
+  pop_failure_jump,
+
+        /* Change to pop_failure_jump if know won't have to backtrack to
+           match; otherwise change to jump.  This is used to jump
+           back to the beginning of a repeat.  If what follows this jump
+           clearly won't match what the repeat does, such that we can be
+           sure that there is no use backtracking out of repetitions
+           already matched, then we change it to a pop_failure_jump.
+           Followed by two-byte address.  */
+  maybe_pop_jump,
+
+        /* Jump to following two-byte address, and push a dummy failure
+           point. This failure point will be thrown away if an attempt
+           is made to use it for a failure.  A `+' construct makes this
+           before the first repeat.  Also used as an intermediary kind
+           of jump when compiling an alternative.  */
+  dummy_failure_jump,
+
+	/* Push a dummy failure point and continue.  Used at the end of
+	   alternatives.  */
+  push_dummy_failure,
+
+        /* Followed by two-byte relative address and two-byte number n.
+           After matching N times, jump to the address upon failure.  */
+  succeed_n,
+
+        /* Followed by two-byte relative address, and two-byte number n.
+           Jump to the address N times, then fail.  */
+  jump_n,
+
+        /* Set the following two-byte relative address to the
+           subsequent two-byte number.  The address *includes* the two
+           bytes of number.  */
+  set_number_at,
+
+  wordchar,	/* Matches any word-constituent character.  */
+  notwordchar,	/* Matches any char that is not a word-constituent.  */
+
+  wordbeg,	/* Succeeds if at word beginning.  */
+  wordend,	/* Succeeds if at word end.  */
+
+  wordbound,	/* Succeeds if at a word boundary.  */
+  notwordbound	/* Succeeds if not at a word boundary.  */
+
+#ifdef emacs
+  ,before_dot,	/* Succeeds if before point.  */
+  at_dot,	/* Succeeds if at point.  */
+  after_dot,	/* Succeeds if after point.  */
+
+	/* Matches any character whose syntax is specified.  Followed by
+           a byte which contains a syntax code, e.g., Sword.  */
+  syntaxspec,
+
+	/* Matches any character whose syntax is not that specified.  */
+  notsyntaxspec
+#endif /* emacs */
+} re_opcode_t;
+
+/* Common operations on the compiled pattern.  */
+
+/* Store NUMBER in two contiguous bytes starting at DESTINATION.  */
+
+#define STORE_NUMBER(destination, number)				\
+  do {									\
+    (destination)[0] = (number) & 0377;					\
+    (destination)[1] = (number) >> 8;					\
+  } while (0)
+
+/* Same as STORE_NUMBER, except increment DESTINATION to
+   the byte after where the number is stored.  Therefore, DESTINATION
+   must be an lvalue.  */
+
+#define STORE_NUMBER_AND_INCR(destination, number)			\
+  do {									\
+    STORE_NUMBER (destination, number);					\
+    (destination) += 2;							\
+  } while (0)
+
+/* Put into DESTINATION a number stored in two contiguous bytes starting
+   at SOURCE.  */
+
+#define EXTRACT_NUMBER(destination, source)				\
+  do {									\
+    (destination) = *(source) & 0377;					\
+    (destination) += SIGN_EXTEND_CHAR (*((source) + 1)) << 8;		\
+  } while (0)
+
+#ifdef DEBUG
+static void extract_number _RE_ARGS ((int *dest, unsigned char *source));
+static void
+extract_number (dest, source)
+    int *dest;
+    unsigned char *source;
+{
+  int temp = SIGN_EXTEND_CHAR (*(source + 1));
+  *dest = *source & 0377;
+  *dest += temp << 8;
+}
+
+# ifndef EXTRACT_MACROS /* To debug the macros.  */
+#  undef EXTRACT_NUMBER
+#  define EXTRACT_NUMBER(dest, src) extract_number (&dest, src)
+# endif /* not EXTRACT_MACROS */
+
+#endif /* DEBUG */
+
+/* Same as EXTRACT_NUMBER, except increment SOURCE to after the number.
+   SOURCE must be an lvalue.  */
+
+#define EXTRACT_NUMBER_AND_INCR(destination, source)			\
+  do {									\
+    EXTRACT_NUMBER (destination, source);				\
+    (source) += 2; 							\
+  } while (0)
+
+#ifdef DEBUG
+static void extract_number_and_incr _RE_ARGS ((int *destination,
+					       unsigned char **source));
+static void
+extract_number_and_incr (destination, source)
+    int *destination;
+    unsigned char **source;
+{
+  extract_number (destination, *source);
+  *source += 2;
+}
+
+# ifndef EXTRACT_MACROS
+#  undef EXTRACT_NUMBER_AND_INCR
+#  define EXTRACT_NUMBER_AND_INCR(dest, src) \
+  extract_number_and_incr (&dest, &src)
+# endif /* not EXTRACT_MACROS */
+
+#endif /* DEBUG */
+
+/* If DEBUG is defined, Regex prints many voluminous messages about what
+   it is doing (if the variable `debug' is nonzero).  If linked with the
+   main program in `iregex.c', you can enter patterns and strings
+   interactively.  And if linked with the main program in `main.c' and
+   the other test files, you can run the already-written tests.  */
+
+#ifdef DEBUG
+
+/* We use standard I/O for debugging.  */
+# include <stdio.h>
+
+/* It is useful to test things that ``must'' be true when debugging.  */
+# include <assert.h>
+
+static int debug = 0;
+
+# define DEBUG_STATEMENT(e) e
+# define DEBUG_PRINT1(x) if (debug) printf (x)
+# define DEBUG_PRINT2(x1, x2) if (debug) printf (x1, x2)
+# define DEBUG_PRINT3(x1, x2, x3) if (debug) printf (x1, x2, x3)
+# define DEBUG_PRINT4(x1, x2, x3, x4) if (debug) printf (x1, x2, x3, x4)
+# define DEBUG_PRINT_COMPILED_PATTERN(p, s, e) 				\
+  if (debug) print_partial_compiled_pattern (s, e)
+# define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)			\
+  if (debug) print_double_string (w, s1, sz1, s2, sz2)
+
+
+/* Print the fastmap in human-readable form.  */
+
+void
+print_fastmap (fastmap)
+    char *fastmap;
+{
+  unsigned was_a_range = 0;
+  unsigned i = 0;
+
+  while (i < (1 << BYTEWIDTH))
+    {
+      if (fastmap[i++])
+	{
+	  was_a_range = 0;
+          putchar (i - 1);
+          while (i < (1 << BYTEWIDTH)  &&  fastmap[i])
+            {
+              was_a_range = 1;
+              i++;
+            }
+	  if (was_a_range)
+            {
+              printf ("-");
+              putchar (i - 1);
+            }
+        }
+    }
+  putchar ('\n');
+}
+
+
+/* Print a compiled pattern string in human-readable form, starting at
+   the START pointer into it and ending just before the pointer END.  */
+
+void
+print_partial_compiled_pattern (start, end)
+    unsigned char *start;
+    unsigned char *end;
+{
+  int mcnt, mcnt2;
+  unsigned char *p1;
+  unsigned char *p = start;
+  unsigned char *pend = end;
+
+  if (start == NULL)
+    {
+      printf ("(null)\n");
+      return;
+    }
+
+  /* Loop over pattern commands.  */
+  while (p < pend)
+    {
+      printf ("%d:\t", p - start);
+
+      switch ((re_opcode_t) *p++)
+	{
+        case no_op:
+          printf ("/no_op");
+          break;
+
+	case exactn:
+	  mcnt = *p++;
+          printf ("/exactn/%d", mcnt);
+          do
+	    {
+              putchar ('/');
+	      putchar (*p++);
+            }
+          while (--mcnt);
+          break;
+
+	case start_memory:
+          mcnt = *p++;
+          printf ("/start_memory/%d/%d", mcnt, *p++);
+          break;
+
+	case stop_memory:
+          mcnt = *p++;
+	  printf ("/stop_memory/%d/%d", mcnt, *p++);
+          break;
+
+	case duplicate:
+	  printf ("/duplicate/%d", *p++);
+	  break;
+
+	case anychar:
+	  printf ("/anychar");
+	  break;
+
+	case charset:
+        case charset_not:
+          {
+            register int c, last = -100;
+	    register int in_range = 0;
+
+	    printf ("/charset [%s",
+	            (re_opcode_t) *(p - 1) == charset_not ? "^" : "");
+
+            assert (p + *p < pend);
+
+            for (c = 0; c < 256; c++)
+	      if (c / 8 < *p
+		  && (p[1 + (c/8)] & (1 << (c % 8))))
+		{
+		  /* Are we starting a range?  */
+		  if (last + 1 == c && ! in_range)
+		    {
+		      putchar ('-');
+		      in_range = 1;
+		    }
+		  /* Have we broken a range?  */
+		  else if (last + 1 != c && in_range)
+              {
+		      putchar (last);
+		      in_range = 0;
+		    }
+
+		  if (! in_range)
+		    putchar (c);
+
+		  last = c;
+              }
+
+	    if (in_range)
+	      putchar (last);
+
+	    putchar (']');
+
+	    p += 1 + *p;
+	  }
+	  break;
+
+	case begline:
+	  printf ("/begline");
+          break;
+
+	case endline:
+          printf ("/endline");
+          break;
+
+	case on_failure_jump:
+          extract_number_and_incr (&mcnt, &p);
+  	  printf ("/on_failure_jump to %d", p + mcnt - start);
+          break;
+
+	case on_failure_keep_string_jump:
+          extract_number_and_incr (&mcnt, &p);
+  	  printf ("/on_failure_keep_string_jump to %d", p + mcnt - start);
+          break;
+
+	case dummy_failure_jump:
+          extract_number_and_incr (&mcnt, &p);
+  	  printf ("/dummy_failure_jump to %d", p + mcnt - start);
+          break;
+
+	case push_dummy_failure:
+          printf ("/push_dummy_failure");
+          break;
+
+        case maybe_pop_jump:
+          extract_number_and_incr (&mcnt, &p);
+  	  printf ("/maybe_pop_jump to %d", p + mcnt - start);
+	  break;
+
+        case pop_failure_jump:
+	  extract_number_and_incr (&mcnt, &p);
+  	  printf ("/pop_failure_jump to %d", p + mcnt - start);
+	  break;
+
+        case jump_past_alt:
+	  extract_number_and_incr (&mcnt, &p);
+  	  printf ("/jump_past_alt to %d", p + mcnt - start);
+	  break;
+
+        case jump:
+	  extract_number_and_incr (&mcnt, &p);
+  	  printf ("/jump to %d", p + mcnt - start);
+	  break;
+
+        case succeed_n:
+          extract_number_and_incr (&mcnt, &p);
+	  p1 = p + mcnt;
+          extract_number_and_incr (&mcnt2, &p);
+	  printf ("/succeed_n to %d, %d times", p1 - start, mcnt2);
+          break;
+
+        case jump_n:
+          extract_number_and_incr (&mcnt, &p);
+	  p1 = p + mcnt;
+          extract_number_and_incr (&mcnt2, &p);
+	  printf ("/jump_n to %d, %d times", p1 - start, mcnt2);
+          break;
+
+        case set_number_at:
+          extract_number_and_incr (&mcnt, &p);
+	  p1 = p + mcnt;
+          extract_number_and_incr (&mcnt2, &p);
+	  printf ("/set_number_at location %d to %d", p1 - start, mcnt2);
+          break;
+
+        case wordbound:
+	  printf ("/wordbound");
+	  break;
+
+	case notwordbound:
+	  printf ("/notwordbound");
+          break;
+
+	case wordbeg:
+	  printf ("/wordbeg");
+	  break;
+
+	case wordend:
+	  printf ("/wordend");
+
+# ifdef emacs
+	case before_dot:
+	  printf ("/before_dot");
+          break;
+
+	case at_dot:
+	  printf ("/at_dot");
+          break;
+
+	case after_dot:
+	  printf ("/after_dot");
+          break;
+
+	case syntaxspec:
+          printf ("/syntaxspec");
+	  mcnt = *p++;
+	  printf ("/%d", mcnt);
+          break;
+
+	case notsyntaxspec:
+          printf ("/notsyntaxspec");
+	  mcnt = *p++;
+	  printf ("/%d", mcnt);
+	  break;
+# endif /* emacs */
+
+	case wordchar:
+	  printf ("/wordchar");
+          break;
+
+	case notwordchar:
+	  printf ("/notwordchar");
+          break;
+
+	case begbuf:
+	  printf ("/begbuf");
+          break;
+
+	case endbuf:
+	  printf ("/endbuf");
+          break;
+
+        default:
+          printf ("?%d", *(p-1));
+	}
+
+      putchar ('\n');
+    }
+
+  printf ("%d:\tend of pattern.\n", p - start);
+}
+
+
+void
+print_compiled_pattern (bufp)
+    struct re_pattern_buffer *bufp;
+{
+  unsigned char *buffer = bufp->buffer;
+
+  print_partial_compiled_pattern (buffer, buffer + bufp->used);
+  printf ("%ld bytes used/%ld bytes allocated.\n",
+	  bufp->used, bufp->allocated);
+
+  if (bufp->fastmap_accurate && bufp->fastmap)
+    {
+      printf ("fastmap: ");
+      print_fastmap (bufp->fastmap);
+    }
+
+  printf ("re_nsub: %d\t", bufp->re_nsub);
+  printf ("regs_alloc: %d\t", bufp->regs_allocated);
+  printf ("can_be_null: %d\t", bufp->can_be_null);
+  printf ("newline_anchor: %d\n", bufp->newline_anchor);
+  printf ("no_sub: %d\t", bufp->no_sub);
+  printf ("not_bol: %d\t", bufp->not_bol);
+  printf ("not_eol: %d\t", bufp->not_eol);
+  printf ("syntax: %lx\n", bufp->syntax);
+  /* Perhaps we should print the translate table?  */
+}
+
+
+void
+print_double_string (where, string1, size1, string2, size2)
+    const char *where;
+    const char *string1;
+    const char *string2;
+    int size1;
+    int size2;
+{
+  int this_char;
+
+  if (where == NULL)
+    printf ("(null)");
+  else
+    {
+      if (FIRST_STRING_P (where))
+        {
+          for (this_char = where - string1; this_char < size1; this_char++)
+            putchar (string1[this_char]);
+
+          where = string2;
+        }
+
+      for (this_char = where - string2; this_char < size2; this_char++)
+        putchar (string2[this_char]);
+    }
+}
+
+void
+printchar (c)
+     int c;
+{
+  putc (c, stderr);
+}
+
+#else /* not DEBUG */
+
+# undef assert
+# define assert(e)
+
+# define DEBUG_STATEMENT(e)
+# define DEBUG_PRINT1(x)
+# define DEBUG_PRINT2(x1, x2)
+# define DEBUG_PRINT3(x1, x2, x3)
+# define DEBUG_PRINT4(x1, x2, x3, x4)
+# define DEBUG_PRINT_COMPILED_PATTERN(p, s, e)
+# define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
+
+#endif /* not DEBUG */
+
+/* Set by `re_set_syntax' to the current regexp syntax to recognize.  Can
+   also be assigned to arbitrarily: each pattern buffer stores its own
+   syntax, so it can be changed between regex compilations.  */
+/* This has no initializer because initialized variables in Emacs
+   become read-only after dumping.  */
+reg_syntax_t re_syntax_options;
+
+
+/* Specify the precise syntax of regexps for compilation.  This provides
+   for compatibility for various utilities which historically have
+   different, incompatible syntaxes.
+
+   The argument SYNTAX is a bit mask comprised of the various bits
+   defined in gnu-regex.h.  We return the old syntax.  */
+
+reg_syntax_t
+re_set_syntax (syntax)
+    reg_syntax_t syntax;
+{
+  reg_syntax_t ret = re_syntax_options;
+
+  re_syntax_options = syntax;
+#ifdef DEBUG
+  if (syntax & RE_DEBUG)
+    debug = 1;
+  else if (debug) /* was on but now is not */
+    debug = 0;
+#endif /* DEBUG */
+  return ret;
+}
+#ifdef _LIBC
+weak_alias (__re_set_syntax, re_set_syntax)
+#endif
+
+/* This table gives an error message for each of the error codes listed
+   in gnu-regex.h.  Obviously the order here has to be same as there.
+   POSIX doesn't require that we do anything for REG_NOERROR,
+   but why not be nice?  */
+
+static const char *re_error_msgid[] =
+  {
+    gettext_noop ("Success"),	/* REG_NOERROR */
+    gettext_noop ("No match"),	/* REG_NOMATCH */
+    gettext_noop ("Invalid regular expression"), /* REG_BADPAT */
+    gettext_noop ("Invalid collation character"), /* REG_ECOLLATE */
+    gettext_noop ("Invalid character class name"), /* REG_ECTYPE */
+    gettext_noop ("Trailing backslash"), /* REG_EESCAPE */
+    gettext_noop ("Invalid back reference"), /* REG_ESUBREG */
+    gettext_noop ("Unmatched [ or [^"),	/* REG_EBRACK */
+    gettext_noop ("Unmatched ( or \\("), /* REG_EPAREN */
+    gettext_noop ("Unmatched \\{"), /* REG_EBRACE */
+    gettext_noop ("Invalid content of \\{\\}"), /* REG_BADBR */
+    gettext_noop ("Invalid range end"),	/* REG_ERANGE */
+    gettext_noop ("Memory exhausted"), /* REG_ESPACE */
+    gettext_noop ("Invalid preceding regular expression"), /* REG_BADRPT */
+    gettext_noop ("Premature end of regular expression"), /* REG_EEND */
+    gettext_noop ("Regular expression too big"), /* REG_ESIZE */
+    gettext_noop ("Unmatched ) or \\)"), /* REG_ERPAREN */
+  };
+
+/* Avoiding alloca during matching, to placate r_alloc.  */
+
+/* Define MATCH_MAY_ALLOCATE unless we need to make sure that the
+   searching and matching functions should not call alloca.  On some
+   systems, alloca is implemented in terms of malloc, and if we're
+   using the relocating allocator routines, then malloc could cause a
+   relocation, which might (if the strings being searched are in the
+   ralloc heap) shift the data out from underneath the regexp
+   routines.
+
+   Here's another reason to avoid allocation: Emacs
+   processes input from X in a signal handler; processing X input may
+   call malloc; if input arrives while a matching routine is calling
+   malloc, then we're scrod.  But Emacs can't just block input while
+   calling matching routines; then we don't notice interrupts when
+   they come in.  So, Emacs blocks input around all regexp calls
+   except the matching calls, which it leaves unprotected, in the
+   faith that they will not malloc.  */
+
+/* Normally, this is fine.  */
+#define MATCH_MAY_ALLOCATE
+
+/* When using GNU C, we are not REALLY using the C alloca, no matter
+   what config.h may say.  So don't take precautions for it.  */
+#ifdef __GNUC__
+# undef C_ALLOCA
+#endif
+
+/* The match routines may not allocate if (1) they would do it with malloc
+   and (2) it's not safe for them to use malloc.
+   Note that if REL_ALLOC is defined, matching would not use malloc for the
+   failure stack, but we would still use it for the register vectors;
+   so REL_ALLOC should not affect this.  */
+#if (defined C_ALLOCA || defined REGEX_MALLOC) && defined emacs
+# undef MATCH_MAY_ALLOCATE
+#endif
+
+
+/* Failure stack declarations and macros; both re_compile_fastmap and
+   re_match_2 use a failure stack.  These have to be macros because of
+   REGEX_ALLOCATE_STACK.  */
+
+
+/* Number of failure points for which to initially allocate space
+   when matching.  If this number is exceeded, we allocate more
+   space, so it is not a hard limit.  */
+#ifndef INIT_FAILURE_ALLOC
+# define INIT_FAILURE_ALLOC 5
+#endif
+
+/* Roughly the maximum number of failure points on the stack.  Would be
+   exactly that if always used MAX_FAILURE_ITEMS items each time we failed.
+   This is a variable only so users of regex can assign to it; we never
+   change it ourselves.  */
+
+#ifdef INT_IS_16BIT
+
+# if defined MATCH_MAY_ALLOCATE
+/* 4400 was enough to cause a crash on Alpha OSF/1,
+   whose default stack limit is 2mb.  */
+long int re_max_failures = 4000;
+# else
+long int re_max_failures = 2000;
+# endif
+
+union fail_stack_elt
+{
+  unsigned char *pointer;
+  long int integer;
+};
+
+typedef union fail_stack_elt fail_stack_elt_t;
+
+typedef struct
+{
+  fail_stack_elt_t *stack;
+  unsigned long int size;
+  unsigned long int avail;		/* Offset of next open position.  */
+} fail_stack_type;
+
+#else /* not INT_IS_16BIT */
+
+# if defined MATCH_MAY_ALLOCATE
+/* 4400 was enough to cause a crash on Alpha OSF/1,
+   whose default stack limit is 2mb.  */
+int re_max_failures = 20000;
+# else
+int re_max_failures = 2000;
+# endif
+
+union fail_stack_elt
+{
+  unsigned char *pointer;
+  int integer;
+};
+
+typedef union fail_stack_elt fail_stack_elt_t;
+
+typedef struct
+{
+  fail_stack_elt_t *stack;
+  unsigned size;
+  unsigned avail;			/* Offset of next open position.  */
+} fail_stack_type;
+
+#endif /* INT_IS_16BIT */
+
+#define FAIL_STACK_EMPTY()     (fail_stack.avail == 0)
+#define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
+#define FAIL_STACK_FULL()      (fail_stack.avail == fail_stack.size)
+
+
+/* Define macros to initialize and free the failure stack.
+   Do `return -2' if the alloc fails.  */
+
+#ifdef MATCH_MAY_ALLOCATE
+# define INIT_FAIL_STACK()						\
+  do {									\
+    fail_stack.stack = (fail_stack_elt_t *)				\
+      REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
+									\
+    if (fail_stack.stack == NULL)					\
+      return -2;							\
+									\
+    fail_stack.size = INIT_FAILURE_ALLOC;				\
+    fail_stack.avail = 0;						\
+  } while (0)
+
+# define RESET_FAIL_STACK()  REGEX_FREE_STACK (fail_stack.stack)
+#else
+# define INIT_FAIL_STACK()						\
+  do {									\
+    fail_stack.avail = 0;						\
+  } while (0)
+
+# define RESET_FAIL_STACK()
+#endif
+
+
+/* Double the size of FAIL_STACK, up to approximately `re_max_failures' items.
+
+   Return 1 if succeeds, and 0 if either ran out of memory
+   allocating space for it or it was already too large.
+
+   REGEX_REALLOCATE_STACK requires `destination' be declared.   */
+
+#define DOUBLE_FAIL_STACK(fail_stack)					\
+  ((fail_stack).size > (unsigned) (re_max_failures * MAX_FAILURE_ITEMS)	\
+   ? 0									\
+   : ((fail_stack).stack = (fail_stack_elt_t *)				\
+        REGEX_REALLOCATE_STACK ((fail_stack).stack, 			\
+          (fail_stack).size * sizeof (fail_stack_elt_t),		\
+          ((fail_stack).size << 1) * sizeof (fail_stack_elt_t)),	\
+									\
+      (fail_stack).stack == NULL					\
+      ? 0								\
+      : ((fail_stack).size <<= 1, 					\
+         1)))
+
+
+/* Push pointer POINTER on FAIL_STACK.
+   Return 1 if was able to do so and 0 if ran out of memory allocating
+   space to do so.  */
+#define PUSH_PATTERN_OP(POINTER, FAIL_STACK)				\
+  ((FAIL_STACK_FULL ()							\
+    && !DOUBLE_FAIL_STACK (FAIL_STACK))					\
+   ? 0									\
+   : ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER,	\
+      1))
+
+/* Push a pointer value onto the failure stack.
+   Assumes the variable `fail_stack'.  Probably should only
+   be called from within `PUSH_FAILURE_POINT'.  */
+#define PUSH_FAILURE_POINTER(item)					\
+  fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
+
+/* This pushes an integer-valued item onto the failure stack.
+   Assumes the variable `fail_stack'.  Probably should only
+   be called from within `PUSH_FAILURE_POINT'.  */
+#define PUSH_FAILURE_INT(item)					\
+  fail_stack.stack[fail_stack.avail++].integer = (item)
+
+/* Push a fail_stack_elt_t value onto the failure stack.
+   Assumes the variable `fail_stack'.  Probably should only
+   be called from within `PUSH_FAILURE_POINT'.  */
+#define PUSH_FAILURE_ELT(item)					\
+  fail_stack.stack[fail_stack.avail++] =  (item)
+
+/* These three POP... operations complement the three PUSH... operations.
+   All assume that `fail_stack' is nonempty.  */
+#define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
+#define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
+#define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
+
+/* Used to omit pushing failure point id's when we're not debugging.  */
+#ifdef DEBUG
+# define DEBUG_PUSH PUSH_FAILURE_INT
+# define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
+#else
+# define DEBUG_PUSH(item)
+# define DEBUG_POP(item_addr)
+#endif
+
+
+/* Push the information about the state we will need
+   if we ever fail back to it.
+
+   Requires variables fail_stack, regstart, regend, reg_info, and
+   num_regs_pushed be declared.  DOUBLE_FAIL_STACK requires `destination'
+   be declared.
+
+   Does `return FAILURE_CODE' if runs out of memory.  */
+
+#define PUSH_FAILURE_POINT(pattern_place, string_place, failure_code)	\
+  do {									\
+    char *destination;							\
+    /* Must be int, so when we don't save any registers, the arithmetic	\
+       of 0 + -1 isn't done as unsigned.  */				\
+    /* Can't be int, since there is not a shred of a guarantee that int	\
+       is wide enough to hold a value of something to which pointer can	\
+       be assigned */							\
+    active_reg_t this_reg;						\
+    									\
+    DEBUG_STATEMENT (failure_id++);					\
+    DEBUG_STATEMENT (nfailure_points_pushed++);				\
+    DEBUG_PRINT2 ("\nPUSH_FAILURE_POINT #%u:\n", failure_id);		\
+    DEBUG_PRINT2 ("  Before push, next avail: %d\n", (fail_stack).avail);\
+    DEBUG_PRINT2 ("                     size: %d\n", (fail_stack).size);\
+									\
+    DEBUG_PRINT2 ("  slots needed: %ld\n", NUM_FAILURE_ITEMS);		\
+    DEBUG_PRINT2 ("     available: %d\n", REMAINING_AVAIL_SLOTS);	\
+									\
+    /* Ensure we have enough space allocated for what we will push.  */	\
+    while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS)			\
+      {									\
+        if (!DOUBLE_FAIL_STACK (fail_stack))				\
+          return failure_code;						\
+									\
+        DEBUG_PRINT2 ("\n  Doubled stack; size now: %d\n",		\
+		       (fail_stack).size);				\
+        DEBUG_PRINT2 ("  slots available: %d\n", REMAINING_AVAIL_SLOTS);\
+      }									\
+									\
+    /* Push the info, starting with the registers.  */			\
+    DEBUG_PRINT1 ("\n");						\
+									\
+    if (1)								\
+      for (this_reg = lowest_active_reg; this_reg <= highest_active_reg; \
+	   this_reg++)							\
+	{								\
+	  DEBUG_PRINT2 ("  Pushing reg: %lu\n", this_reg);		\
+	  DEBUG_STATEMENT (num_regs_pushed++);				\
+									\
+	  DEBUG_PRINT2 ("    start: %p\n", regstart[this_reg]);		\
+	  PUSH_FAILURE_POINTER (regstart[this_reg]);			\
+									\
+	  DEBUG_PRINT2 ("    end: %p\n", regend[this_reg]);		\
+	  PUSH_FAILURE_POINTER (regend[this_reg]);			\
+									\
+	  DEBUG_PRINT2 ("    info: %p\n      ",				\
+			reg_info[this_reg].word.pointer);		\
+	  DEBUG_PRINT2 (" match_null=%d",				\
+			REG_MATCH_NULL_STRING_P (reg_info[this_reg]));	\
+	  DEBUG_PRINT2 (" active=%d", IS_ACTIVE (reg_info[this_reg]));	\
+	  DEBUG_PRINT2 (" matched_something=%d",			\
+			MATCHED_SOMETHING (reg_info[this_reg]));	\
+	  DEBUG_PRINT2 (" ever_matched=%d",				\
+			EVER_MATCHED_SOMETHING (reg_info[this_reg]));	\
+	  DEBUG_PRINT1 ("\n");						\
+	  PUSH_FAILURE_ELT (reg_info[this_reg].word);			\
+	}								\
+									\
+    DEBUG_PRINT2 ("  Pushing  low active reg: %ld\n", lowest_active_reg);\
+    PUSH_FAILURE_INT (lowest_active_reg);				\
+									\
+    DEBUG_PRINT2 ("  Pushing high active reg: %ld\n", highest_active_reg);\
+    PUSH_FAILURE_INT (highest_active_reg);				\
+									\
+    DEBUG_PRINT2 ("  Pushing pattern %p:\n", pattern_place);		\
+    DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend);		\
+    PUSH_FAILURE_POINTER (pattern_place);				\
+									\
+    DEBUG_PRINT2 ("  Pushing string %p: `", string_place);		\
+    DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2,   \
+				 size2);				\
+    DEBUG_PRINT1 ("'\n");						\
+    PUSH_FAILURE_POINTER (string_place);				\
+									\
+    DEBUG_PRINT2 ("  Pushing failure id: %u\n", failure_id);		\
+    DEBUG_PUSH (failure_id);						\
+  } while (0)
+
+/* This is the number of items that are pushed and popped on the stack
+   for each register.  */
+#define NUM_REG_ITEMS  3
+
+/* Individual items aside from the registers.  */
+#ifdef DEBUG
+# define NUM_NONREG_ITEMS 5 /* Includes failure point id.  */
+#else
+# define NUM_NONREG_ITEMS 4
+#endif
+
+/* We push at most this many items on the stack.  */
+/* We used to use (num_regs - 1), which is the number of registers
+   this regexp will save; but that was changed to 5
+   to avoid stack overflow for a regexp with lots of parens.  */
+#define MAX_FAILURE_ITEMS (5 * NUM_REG_ITEMS + NUM_NONREG_ITEMS)
+
+/* We actually push this many items.  */
+#define NUM_FAILURE_ITEMS				\
+  (((0							\
+     ? 0 : highest_active_reg - lowest_active_reg + 1)	\
+    * NUM_REG_ITEMS)					\
+   + NUM_NONREG_ITEMS)
+
+/* How many items can still be added to the stack without overflowing it.  */
+#define REMAINING_AVAIL_SLOTS ((fail_stack).size - (fail_stack).avail)
+
+
+/* Pops what PUSH_FAIL_STACK pushes.
+
+   We restore into the parameters, all of which should be lvalues:
+     STR -- the saved data position.
+     PAT -- the saved pattern position.
+     LOW_REG, HIGH_REG -- the highest and lowest active registers.
+     REGSTART, REGEND -- arrays of string positions.
+     REG_INFO -- array of information about each subexpression.
+
+   Also assumes the variables `fail_stack' and (if debugging), `bufp',
+   `pend', `string1', `size1', `string2', and `size2'.  */
+
+#define POP_FAILURE_POINT(str, pat, low_reg, high_reg, regstart, regend, reg_info)\
+{									\
+  DEBUG_STATEMENT (unsigned failure_id;)				\
+  active_reg_t this_reg;						\
+  const unsigned char *string_temp;					\
+									\
+  assert (!FAIL_STACK_EMPTY ());					\
+									\
+  /* Remove failure points and point to how many regs pushed.  */	\
+  DEBUG_PRINT1 ("POP_FAILURE_POINT:\n");				\
+  DEBUG_PRINT2 ("  Before pop, next avail: %d\n", fail_stack.avail);	\
+  DEBUG_PRINT2 ("                    size: %d\n", fail_stack.size);	\
+									\
+  assert (fail_stack.avail >= NUM_NONREG_ITEMS);			\
+									\
+  DEBUG_POP (&failure_id);						\
+  DEBUG_PRINT2 ("  Popping failure id: %u\n", failure_id);		\
+									\
+  /* If the saved string location is NULL, it came from an		\
+     on_failure_keep_string_jump opcode, and we want to throw away the	\
+     saved NULL, thus retaining our current position in the string.  */	\
+  string_temp = POP_FAILURE_POINTER ();					\
+  if (string_temp != NULL)						\
+    str = (const char *) string_temp;					\
+									\
+  DEBUG_PRINT2 ("  Popping string %p: `", str);				\
+  DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2);	\
+  DEBUG_PRINT1 ("'\n");							\
+									\
+  pat = (unsigned char *) POP_FAILURE_POINTER ();			\
+  DEBUG_PRINT2 ("  Popping pattern %p:\n", pat);			\
+  DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend);			\
+									\
+  /* Restore register info.  */						\
+  high_reg = (active_reg_t) POP_FAILURE_INT ();				\
+  DEBUG_PRINT2 ("  Popping high active reg: %ld\n", high_reg);		\
+									\
+  low_reg = (active_reg_t) POP_FAILURE_INT ();				\
+  DEBUG_PRINT2 ("  Popping  low active reg: %ld\n", low_reg);		\
+									\
+  if (1)								\
+    for (this_reg = high_reg; this_reg >= low_reg; this_reg--)		\
+      {									\
+	DEBUG_PRINT2 ("    Popping reg: %ld\n", this_reg);		\
+									\
+	reg_info[this_reg].word = POP_FAILURE_ELT ();			\
+	DEBUG_PRINT2 ("      info: %p\n",				\
+		      reg_info[this_reg].word.pointer);			\
+									\
+	regend[this_reg] = (const char *) POP_FAILURE_POINTER ();	\
+	DEBUG_PRINT2 ("      end: %p\n", regend[this_reg]);		\
+									\
+	regstart[this_reg] = (const char *) POP_FAILURE_POINTER ();	\
+	DEBUG_PRINT2 ("      start: %p\n", regstart[this_reg]);		\
+      }									\
+  else									\
+    {									\
+      for (this_reg = highest_active_reg; this_reg > high_reg; this_reg--) \
+	{								\
+	  reg_info[this_reg].word.integer = 0;				\
+	  regend[this_reg] = 0;						\
+	  regstart[this_reg] = 0;					\
+	}								\
+      highest_active_reg = high_reg;					\
+    }									\
+									\
+  set_regs_matched_done = 0;						\
+  DEBUG_STATEMENT (nfailure_points_popped++);				\
+} /* POP_FAILURE_POINT */
+
+
+
+/* Structure for per-register (a.k.a. per-group) information.
+   Other register information, such as the
+   starting and ending positions (which are addresses), and the list of
+   inner groups (which is a bits list) are maintained in separate
+   variables.
+
+   We are making a (strictly speaking) nonportable assumption here: that
+   the compiler will pack our bit fields into something that fits into
+   the type of `word', i.e., is something that fits into one item on the
+   failure stack.  */
+
+
+/* Declarations and macros for re_match_2.  */
+
+typedef union
+{
+  fail_stack_elt_t word;
+  struct
+  {
+      /* This field is one if this group can match the empty string,
+         zero if not.  If not yet determined,  `MATCH_NULL_UNSET_VALUE'.  */
+#define MATCH_NULL_UNSET_VALUE 3
+    unsigned match_null_string_p : 2;
+    unsigned is_active : 1;
+    unsigned matched_something : 1;
+    unsigned ever_matched_something : 1;
+  } bits;
+} register_info_type;
+
+#define REG_MATCH_NULL_STRING_P(R)  ((R).bits.match_null_string_p)
+#define IS_ACTIVE(R)  ((R).bits.is_active)
+#define MATCHED_SOMETHING(R)  ((R).bits.matched_something)
+#define EVER_MATCHED_SOMETHING(R)  ((R).bits.ever_matched_something)
+
+
+/* Call this when have matched a real character; it sets `matched' flags
+   for the subexpressions which we are currently inside.  Also records
+   that those subexprs have matched.  */
+#define SET_REGS_MATCHED()						\
+  do									\
+    {									\
+      if (!set_regs_matched_done)					\
+	{								\
+	  active_reg_t r;						\
+	  set_regs_matched_done = 1;					\
+	  for (r = lowest_active_reg; r <= highest_active_reg; r++)	\
+	    {								\
+	      MATCHED_SOMETHING (reg_info[r])				\
+		= EVER_MATCHED_SOMETHING (reg_info[r])			\
+		= 1;							\
+	    }								\
+	}								\
+    }									\
+  while (0)
+
+/* Registers are set to a sentinel when they haven't yet matched.  */
+static char reg_unset_dummy;
+#define REG_UNSET_VALUE (&reg_unset_dummy)
+#define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
+
+/* Subroutine declarations and macros for regex_compile.  */
+
+static reg_errcode_t regex_compile _RE_ARGS ((const char *pattern, size_t size,
+					      reg_syntax_t syntax,
+					      struct re_pattern_buffer *bufp));
+static void store_op1 _RE_ARGS ((re_opcode_t op, unsigned char *loc, int arg));
+static void store_op2 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
+				 int arg1, int arg2));
+static void insert_op1 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
+				  int arg, unsigned char *end));
+static void insert_op2 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
+				  int arg1, int arg2, unsigned char *end));
+static boolean at_begline_loc_p _RE_ARGS ((const char *pattern, const char *p,
+					   reg_syntax_t syntax));
+static boolean at_endline_loc_p _RE_ARGS ((const char *p, const char *pend,
+					   reg_syntax_t syntax));
+static reg_errcode_t compile_range _RE_ARGS ((const char **p_ptr,
+					      const char *pend,
+					      char *translate,
+					      reg_syntax_t syntax,
+					      unsigned char *b));
+
+/* Fetch the next character in the uncompiled pattern---translating it
+   if necessary.  Also cast from a signed character in the constant
+   string passed to us by the user to an unsigned char that we can use
+   as an array index (in, e.g., `translate').  */
+#ifndef PATFETCH
+# define PATFETCH(c)							\
+  do {if (p == pend) return REG_EEND;					\
+    c = (unsigned char) *p++;						\
+    if (translate) c = (unsigned char) translate[c];			\
+  } while (0)
+#endif
+
+/* Fetch the next character in the uncompiled pattern, with no
+   translation.  */
+#define PATFETCH_RAW(c)							\
+  do {if (p == pend) return REG_EEND;					\
+    c = (unsigned char) *p++; 						\
+  } while (0)
+
+/* Go backwards one character in the pattern.  */
+#define PATUNFETCH p--
+
+
+/* If `translate' is non-null, return translate[D], else just D.  We
+   cast the subscript to translate because some data is declared as
+   `char *', to avoid warnings when a string constant is passed.  But
+   when we use a character as a subscript we must make it unsigned.  */
+#ifndef TRANSLATE
+# define TRANSLATE(d) \
+  (translate ? (char) translate[(unsigned char) (d)] : (d))
+#endif
+
+
+/* Macros for outputting the compiled pattern into `buffer'.  */
+
+/* If the buffer isn't allocated when it comes in, use this.  */
+#define INIT_BUF_SIZE  32
+
+/* Make sure we have at least N more bytes of space in buffer.  */
+#define GET_BUFFER_SPACE(n)						\
+    while ((unsigned long) (b - bufp->buffer + (n)) > bufp->allocated)	\
+      EXTEND_BUFFER ()
+
+/* Make sure we have one more byte of buffer space and then add C to it.  */
+#define BUF_PUSH(c)							\
+  do {									\
+    GET_BUFFER_SPACE (1);						\
+    *b++ = (unsigned char) (c);						\
+  } while (0)
+
+
+/* Ensure we have two more bytes of buffer space and then append C1 and C2.  */
+#define BUF_PUSH_2(c1, c2)						\
+  do {									\
+    GET_BUFFER_SPACE (2);						\
+    *b++ = (unsigned char) (c1);					\
+    *b++ = (unsigned char) (c2);					\
+  } while (0)
+
+
+/* As with BUF_PUSH_2, except for three bytes.  */
+#define BUF_PUSH_3(c1, c2, c3)						\
+  do {									\
+    GET_BUFFER_SPACE (3);						\
+    *b++ = (unsigned char) (c1);					\
+    *b++ = (unsigned char) (c2);					\
+    *b++ = (unsigned char) (c3);					\
+  } while (0)
+
+
+/* Store a jump with opcode OP at LOC to location TO.  We store a
+   relative address offset by the three bytes the jump itself occupies.  */
+#define STORE_JUMP(op, loc, to) \
+  store_op1 (op, loc, (int) ((to) - (loc) - 3))
+
+/* Likewise, for a two-argument jump.  */
+#define STORE_JUMP2(op, loc, to, arg) \
+  store_op2 (op, loc, (int) ((to) - (loc) - 3), arg)
+
+/* Like `STORE_JUMP', but for inserting.  Assume `b' is the buffer end.  */
+#define INSERT_JUMP(op, loc, to) \
+  insert_op1 (op, loc, (int) ((to) - (loc) - 3), b)
+
+/* Like `STORE_JUMP2', but for inserting.  Assume `b' is the buffer end.  */
+#define INSERT_JUMP2(op, loc, to, arg) \
+  insert_op2 (op, loc, (int) ((to) - (loc) - 3), arg, b)
+
+
+/* This is not an arbitrary limit: the arguments which represent offsets
+   into the pattern are two bytes long.  So if 2^16 bytes turns out to
+   be too small, many things would have to change.  */
+/* Any other compiler which, like MSC, has allocation limit below 2^16
+   bytes will have to use approach similar to what was done below for
+   MSC and drop MAX_BUF_SIZE a bit.  Otherwise you may end up
+   reallocating to 0 bytes.  Such thing is not going to work too well.
+   You have been warned!!  */
+#if defined _MSC_VER  && !defined WIN32
+/* Microsoft C 16-bit versions limit malloc to approx 65512 bytes.
+   The REALLOC define eliminates a flurry of conversion warnings,
+   but is not required. */
+# define MAX_BUF_SIZE  65500L
+# define REALLOC(p,s) realloc ((p), (size_t) (s))
+#else
+# define MAX_BUF_SIZE (1L << 16)
+# define REALLOC(p,s) realloc ((p), (s))
+#endif
+
+/* Extend the buffer by twice its current size via realloc and
+   reset the pointers that pointed into the old block to point to the
+   correct places in the new one.  If extending the buffer results in it
+   being larger than MAX_BUF_SIZE, then flag memory exhausted.  */
+#define EXTEND_BUFFER()							\
+  do { 									\
+    unsigned char *old_buffer = bufp->buffer;				\
+    if (bufp->allocated == MAX_BUF_SIZE) 				\
+      return REG_ESIZE;							\
+    bufp->allocated <<= 1;						\
+    if (bufp->allocated > MAX_BUF_SIZE)					\
+      bufp->allocated = MAX_BUF_SIZE; 					\
+    bufp->buffer = (unsigned char *) REALLOC (bufp->buffer, bufp->allocated);\
+    if (bufp->buffer == NULL)						\
+      return REG_ESPACE;						\
+    /* If the buffer moved, move all the pointers into it.  */		\
+    if (old_buffer != bufp->buffer)					\
+      {									\
+        b = (b - old_buffer) + bufp->buffer;				\
+        begalt = (begalt - old_buffer) + bufp->buffer;			\
+        if (fixup_alt_jump)						\
+          fixup_alt_jump = (fixup_alt_jump - old_buffer) + bufp->buffer;\
+        if (laststart)							\
+          laststart = (laststart - old_buffer) + bufp->buffer;		\
+        if (pending_exact)						\
+          pending_exact = (pending_exact - old_buffer) + bufp->buffer;	\
+      }									\
+  } while (0)
+
+
+/* Since we have one byte reserved for the register number argument to
+   {start,stop}_memory, the maximum number of groups we can report
+   things about is what fits in that byte.  */
+#define MAX_REGNUM 255
+
+/* But patterns can have more than `MAX_REGNUM' registers.  We just
+   ignore the excess.  */
+typedef unsigned regnum_t;
+
+
+/* Macros for the compile stack.  */
+
+/* Since offsets can go either forwards or backwards, this type needs to
+   be able to hold values from -(MAX_BUF_SIZE - 1) to MAX_BUF_SIZE - 1.  */
+/* int may be not enough when sizeof(int) == 2.  */
+typedef long pattern_offset_t;
+
+typedef struct
+{
+  pattern_offset_t begalt_offset;
+  pattern_offset_t fixup_alt_jump;
+  pattern_offset_t inner_group_offset;
+  pattern_offset_t laststart_offset;
+  regnum_t regnum;
+} compile_stack_elt_t;
+
+
+typedef struct
+{
+  compile_stack_elt_t *stack;
+  unsigned size;
+  unsigned avail;			/* Offset of next open position.  */
+} compile_stack_type;
+
+
+#define INIT_COMPILE_STACK_SIZE 32
+
+#define COMPILE_STACK_EMPTY  (compile_stack.avail == 0)
+#define COMPILE_STACK_FULL  (compile_stack.avail == compile_stack.size)
+
+/* The next available element.  */
+#define COMPILE_STACK_TOP (compile_stack.stack[compile_stack.avail])
+
+
+/* Set the bit for character C in a list.  */
+#define SET_LIST_BIT(c)                               \
+  (b[((unsigned char) (c)) / BYTEWIDTH]               \
+   |= 1 << (((unsigned char) c) % BYTEWIDTH))
+
+
+/* Get the next unsigned number in the uncompiled pattern.  */
+#define GET_UNSIGNED_NUMBER(num) 					\
+  { if (p != pend)							\
+     {									\
+       PATFETCH (c); 							\
+       while (ISDIGIT (c)) 						\
+         { 								\
+           if (num < 0)							\
+              num = 0;							\
+           num = num * 10 + c - '0'; 					\
+           if (p == pend) 						\
+              break; 							\
+           PATFETCH (c);						\
+         } 								\
+       } 								\
+    }
+
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H)
+/* The GNU C library provides support for user-defined character classes
+   and the functions from ISO C amendement 1.  */
+# ifdef CHARCLASS_NAME_MAX
+#  define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
+# else
+/* This shouldn't happen but some implementation might still have this
+   problem.  Use a reasonable default value.  */
+#  define CHAR_CLASS_MAX_LENGTH 256
+# endif
+
+# ifdef _LIBC
+#  define IS_CHAR_CLASS(string) __wctype (string)
+# else
+#  define IS_CHAR_CLASS(string) wctype (string)
+# endif
+#else
+# define CHAR_CLASS_MAX_LENGTH  6 /* Namely, `xdigit'.  */
+
+# define IS_CHAR_CLASS(string)						\
+   (STREQ (string, "alpha") || STREQ (string, "upper")			\
+    || STREQ (string, "lower") || STREQ (string, "digit")		\
+    || STREQ (string, "alnum") || STREQ (string, "xdigit")		\
+    || STREQ (string, "space") || STREQ (string, "print")		\
+    || STREQ (string, "punct") || STREQ (string, "graph")		\
+    || STREQ (string, "cntrl") || STREQ (string, "blank"))
+#endif
+
+#ifndef MATCH_MAY_ALLOCATE
+
+/* If we cannot allocate large objects within re_match_2_internal,
+   we make the fail stack and register vectors global.
+   The fail stack, we grow to the maximum size when a regexp
+   is compiled.
+   The register vectors, we adjust in size each time we
+   compile a regexp, according to the number of registers it needs.  */
+
+static fail_stack_type fail_stack;
+
+/* Size with which the following vectors are currently allocated.
+   That is so we can make them bigger as needed,
+   but never make them smaller.  */
+static int regs_allocated_size;
+
+static const char **     regstart, **     regend;
+static const char ** old_regstart, ** old_regend;
+static const char **best_regstart, **best_regend;
+static register_info_type *reg_info;
+static const char **reg_dummy;
+static register_info_type *reg_info_dummy;
+
+/* Make the register vectors big enough for NUM_REGS registers,
+   but don't make them smaller.  */
+
+static
+regex_grow_registers (num_regs)
+     int num_regs;
+{
+  if (num_regs > regs_allocated_size)
+    {
+      RETALLOC_IF (regstart,	 num_regs, const char *);
+      RETALLOC_IF (regend,	 num_regs, const char *);
+      RETALLOC_IF (old_regstart, num_regs, const char *);
+      RETALLOC_IF (old_regend,	 num_regs, const char *);
+      RETALLOC_IF (best_regstart, num_regs, const char *);
+      RETALLOC_IF (best_regend,	 num_regs, const char *);
+      RETALLOC_IF (reg_info,	 num_regs, register_info_type);
+      RETALLOC_IF (reg_dummy,	 num_regs, const char *);
+      RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
+
+      regs_allocated_size = num_regs;
+    }
+}
+
+#endif /* not MATCH_MAY_ALLOCATE */
+
+static boolean group_in_compile_stack _RE_ARGS ((compile_stack_type
+						 compile_stack,
+						 regnum_t regnum));
+
+/* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
+   Returns one of error codes defined in `gnu-regex.h', or zero for success.
+
+   Assumes the `allocated' (and perhaps `buffer') and `translate'
+   fields are set in BUFP on entry.
+
+   If it succeeds, results are put in BUFP (if it returns an error, the
+   contents of BUFP are undefined):
+     `buffer' is the compiled pattern;
+     `syntax' is set to SYNTAX;
+     `used' is set to the length of the compiled pattern;
+     `fastmap_accurate' is zero;
+     `re_nsub' is the number of subexpressions in PATTERN;
+     `not_bol' and `not_eol' are zero;
+
+   The `fastmap' and `newline_anchor' fields are neither
+   examined nor set.  */
+
+/* Return, freeing storage we allocated.  */
+#define FREE_STACK_RETURN(value)		\
+  return (free (compile_stack.stack), value)
+
+static reg_errcode_t
+regex_compile (pattern, size, syntax, bufp)
+     const char *pattern;
+     size_t size;
+     reg_syntax_t syntax;
+     struct re_pattern_buffer *bufp;
+{
+  /* We fetch characters from PATTERN here.  Even though PATTERN is
+     `char *' (i.e., signed), we declare these variables as unsigned, so
+     they can be reliably used as array indices.  */
+  register unsigned char c, c1;
+
+  /* A random temporary spot in PATTERN.  */
+  const char *p1;
+
+  /* Points to the end of the buffer, where we should append.  */
+  register unsigned char *b;
+
+  /* Keeps track of unclosed groups.  */
+  compile_stack_type compile_stack;
+
+  /* Points to the current (ending) position in the pattern.  */
+  const char *p = pattern;
+  const char *pend = pattern + size;
+
+  /* How to translate the characters in the pattern.  */
+  RE_TRANSLATE_TYPE translate = bufp->translate;
+
+  /* Address of the count-byte of the most recently inserted `exactn'
+     command.  This makes it possible to tell if a new exact-match
+     character can be added to that command or if the character requires
+     a new `exactn' command.  */
+  unsigned char *pending_exact = 0;
+
+  /* Address of start of the most recently finished expression.
+     This tells, e.g., postfix * where to find the start of its
+     operand.  Reset at the beginning of groups and alternatives.  */
+  unsigned char *laststart = 0;
+
+  /* Address of beginning of regexp, or inside of last group.  */
+  unsigned char *begalt;
+
+  /* Place in the uncompiled pattern (i.e., the {) to
+     which to go back if the interval is invalid.  */
+  const char *beg_interval;
+
+  /* Address of the place where a forward jump should go to the end of
+     the containing expression.  Each alternative of an `or' -- except the
+     last -- ends with a forward jump of this sort.  */
+  unsigned char *fixup_alt_jump = 0;
+
+  /* Counts open-groups as they are encountered.  Remembered for the
+     matching close-group on the compile stack, so the same register
+     number is put in the stop_memory as the start_memory.  */
+  regnum_t regnum = 0;
+
+#ifdef DEBUG
+  DEBUG_PRINT1 ("\nCompiling pattern: ");
+  if (debug)
+    {
+      unsigned debug_count;
+
+      for (debug_count = 0; debug_count < size; debug_count++)
+        putchar (pattern[debug_count]);
+      putchar ('\n');
+    }
+#endif /* DEBUG */
+
+  /* Initialize the compile stack.  */
+  compile_stack.stack = TALLOC (INIT_COMPILE_STACK_SIZE, compile_stack_elt_t);
+  if (compile_stack.stack == NULL)
+    return REG_ESPACE;
+
+  compile_stack.size = INIT_COMPILE_STACK_SIZE;
+  compile_stack.avail = 0;
+
+  /* Initialize the pattern buffer.  */
+  bufp->syntax = syntax;
+  bufp->fastmap_accurate = 0;
+  bufp->not_bol = bufp->not_eol = 0;
+
+  /* Set `used' to zero, so that if we return an error, the pattern
+     printer (for debugging) will think there's no pattern.  We reset it
+     at the end.  */
+  bufp->used = 0;
+
+  /* Always count groups, whether or not bufp->no_sub is set.  */
+  bufp->re_nsub = 0;
+
+#if !defined emacs && !defined SYNTAX_TABLE
+  /* Initialize the syntax table.  */
+   init_syntax_once ();
+#endif
+
+  if (bufp->allocated == 0)
+    {
+      if (bufp->buffer)
+	{ /* If zero allocated, but buffer is non-null, try to realloc
+             enough space.  This loses if buffer's address is bogus, but
+             that is the user's responsibility.  */
+          RETALLOC (bufp->buffer, INIT_BUF_SIZE, unsigned char);
+        }
+      else
+        { /* Caller did not allocate a buffer.  Do it for them.  */
+          bufp->buffer = TALLOC (INIT_BUF_SIZE, unsigned char);
+        }
+      if (!bufp->buffer) FREE_STACK_RETURN (REG_ESPACE);
+
+      bufp->allocated = INIT_BUF_SIZE;
+    }
+
+  begalt = b = bufp->buffer;
+
+  /* Loop through the uncompiled pattern until we're at the end.  */
+  while (p != pend)
+    {
+      PATFETCH (c);
+
+      switch (c)
+        {
+        case '^':
+          {
+            if (   /* If at start of pattern, it's an operator.  */
+                   p == pattern + 1
+                   /* If context independent, it's an operator.  */
+                || syntax & RE_CONTEXT_INDEP_ANCHORS
+                   /* Otherwise, depends on what's come before.  */
+                || at_begline_loc_p (pattern, p, syntax))
+              BUF_PUSH (begline);
+            else
+              goto normal_char;
+          }
+          break;
+
+
+        case '$':
+          {
+            if (   /* If at end of pattern, it's an operator.  */
+                   p == pend
+                   /* If context independent, it's an operator.  */
+                || syntax & RE_CONTEXT_INDEP_ANCHORS
+                   /* Otherwise, depends on what's next.  */
+                || at_endline_loc_p (p, pend, syntax))
+               BUF_PUSH (endline);
+             else
+               goto normal_char;
+           }
+           break;
+
+
+	case '+':
+        case '?':
+          if ((syntax & RE_BK_PLUS_QM)
+              || (syntax & RE_LIMITED_OPS))
+            goto normal_char;
+        handle_plus:
+        case '*':
+          /* If there is no previous pattern... */
+          if (!laststart)
+            {
+              if (syntax & RE_CONTEXT_INVALID_OPS)
+                FREE_STACK_RETURN (REG_BADRPT);
+              else if (!(syntax & RE_CONTEXT_INDEP_OPS))
+                goto normal_char;
+            }
+
+          {
+            /* Are we optimizing this jump?  */
+            boolean keep_string_p = false;
+
+            /* 1 means zero (many) matches is allowed.  */
+            char zero_times_ok = 0, many_times_ok = 0;
+
+            /* If there is a sequence of repetition chars, collapse it
+               down to just one (the right one).  We can't combine
+               interval operators with these because of, e.g., `a{2}*',
+               which should only match an even number of `a's.  */
+
+            for (;;)
+              {
+                zero_times_ok |= c != '+';
+                many_times_ok |= c != '?';
+
+                if (p == pend)
+                  break;
+
+                PATFETCH (c);
+
+                if (c == '*'
+                    || (!(syntax & RE_BK_PLUS_QM) && (c == '+' || c == '?')))
+                  ;
+
+                else if (syntax & RE_BK_PLUS_QM  &&  c == '\\')
+                  {
+                    if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
+
+                    PATFETCH (c1);
+                    if (!(c1 == '+' || c1 == '?'))
+                      {
+                        PATUNFETCH;
+                        PATUNFETCH;
+                        break;
+                      }
+
+                    c = c1;
+                  }
+                else
+                  {
+                    PATUNFETCH;
+                    break;
+                  }
+
+                /* If we get here, we found another repeat character.  */
+               }
+
+            /* Star, etc. applied to an empty pattern is equivalent
+               to an empty pattern.  */
+            if (!laststart)
+              break;
+
+            /* Now we know whether or not zero matches is allowed
+               and also whether or not two or more matches is allowed.  */
+            if (many_times_ok)
+              { /* More than one repetition is allowed, so put in at the
+                   end a backward relative jump from `b' to before the next
+                   jump we're going to put in below (which jumps from
+                   laststart to after this jump).
+
+                   But if we are at the `*' in the exact sequence `.*\n',
+                   insert an unconditional jump backwards to the .,
+                   instead of the beginning of the loop.  This way we only
+                   push a failure point once, instead of every time
+                   through the loop.  */
+                assert (p - 1 > pattern);
+
+                /* Allocate the space for the jump.  */
+                GET_BUFFER_SPACE (3);
+
+                /* We know we are not at the first character of the pattern,
+                   because laststart was nonzero.  And we've already
+                   incremented `p', by the way, to be the character after
+                   the `*'.  Do we have to do something analogous here
+                   for null bytes, because of RE_DOT_NOT_NULL?  */
+                if (TRANSLATE (*(p - 2)) == TRANSLATE ('.')
+		    && zero_times_ok
+                    && p < pend && TRANSLATE (*p) == TRANSLATE ('\n')
+                    && !(syntax & RE_DOT_NEWLINE))
+                  { /* We have .*\n.  */
+                    STORE_JUMP (jump, b, laststart);
+                    keep_string_p = true;
+                  }
+                else
+                  /* Anything else.  */
+                  STORE_JUMP (maybe_pop_jump, b, laststart - 3);
+
+                /* We've added more stuff to the buffer.  */
+                b += 3;
+              }
+
+            /* On failure, jump from laststart to b + 3, which will be the
+               end of the buffer after this jump is inserted.  */
+            GET_BUFFER_SPACE (3);
+            INSERT_JUMP (keep_string_p ? on_failure_keep_string_jump
+                                       : on_failure_jump,
+                         laststart, b + 3);
+            pending_exact = 0;
+            b += 3;
+
+            if (!zero_times_ok)
+              {
+                /* At least one repetition is required, so insert a
+                   `dummy_failure_jump' before the initial
+                   `on_failure_jump' instruction of the loop. This
+                   effects a skip over that instruction the first time
+                   we hit that loop.  */
+                GET_BUFFER_SPACE (3);
+                INSERT_JUMP (dummy_failure_jump, laststart, laststart + 6);
+                b += 3;
+              }
+            }
+	  break;
+
+
+	case '.':
+          laststart = b;
+          BUF_PUSH (anychar);
+          break;
+
+
+        case '[':
+          {
+            boolean had_char_class = false;
+
+            if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
+
+            /* Ensure that we have enough space to push a charset: the
+               opcode, the length count, and the bitset; 34 bytes in all.  */
+	    GET_BUFFER_SPACE (34);
+
+            laststart = b;
+
+            /* We test `*p == '^' twice, instead of using an if
+               statement, so we only need one BUF_PUSH.  */
+            BUF_PUSH (*p == '^' ? charset_not : charset);
+            if (*p == '^')
+              p++;
+
+            /* Remember the first position in the bracket expression.  */
+            p1 = p;
+
+            /* Push the number of bytes in the bitmap.  */
+            BUF_PUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
+
+            /* Clear the whole map.  */
+            bzero (b, (1 << BYTEWIDTH) / BYTEWIDTH);
+
+            /* charset_not matches newline according to a syntax bit.  */
+            if ((re_opcode_t) b[-2] == charset_not
+                && (syntax & RE_HAT_LISTS_NOT_NEWLINE))
+              SET_LIST_BIT ('\n');
+
+            /* Read in characters and ranges, setting map bits.  */
+            for (;;)
+              {
+                if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
+
+                PATFETCH (c);
+
+                /* \ might escape characters inside [...] and [^...].  */
+                if ((syntax & RE_BACKSLASH_ESCAPE_IN_LISTS) && c == '\\')
+                  {
+                    if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
+
+                    PATFETCH (c1);
+                    SET_LIST_BIT (c1);
+                    continue;
+                  }
+
+                /* Could be the end of the bracket expression.  If it's
+                   not (i.e., when the bracket expression is `[]' so
+                   far), the ']' character bit gets set way below.  */
+                if (c == ']' && p != p1 + 1)
+                  break;
+
+                /* Look ahead to see if it's a range when the last thing
+                   was a character class.  */
+                if (had_char_class && c == '-' && *p != ']')
+                  FREE_STACK_RETURN (REG_ERANGE);
+
+                /* Look ahead to see if it's a range when the last thing
+                   was a character: if this is a hyphen not at the
+                   beginning or the end of a list, then it's the range
+                   operator.  */
+                if (c == '-'
+                    && !(p - 2 >= pattern && p[-2] == '[')
+                    && !(p - 3 >= pattern && p[-3] == '[' && p[-2] == '^')
+                    && *p != ']')
+                  {
+                    reg_errcode_t ret
+                      = compile_range (&p, pend, translate, syntax, b);
+                    if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
+                  }
+
+                else if (p[0] == '-' && p[1] != ']')
+                  { /* This handles ranges made up of characters only.  */
+                    reg_errcode_t ret;
+
+		    /* Move past the `-'.  */
+                    PATFETCH (c1);
+
+                    ret = compile_range (&p, pend, translate, syntax, b);
+                    if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
+                  }
+
+                /* See if we're at the beginning of a possible character
+                   class.  */
+
+                else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
+                  { /* Leave room for the null.  */
+                    char str[CHAR_CLASS_MAX_LENGTH + 1];
+
+                    PATFETCH (c);
+                    c1 = 0;
+
+                    /* If pattern is `[[:'.  */
+                    if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
+
+                    for (;;)
+                      {
+                        PATFETCH (c);
+                        if ((c == ':' && *p == ']') || p == pend
+                            || c1 == CHAR_CLASS_MAX_LENGTH)
+                          break;
+                        str[c1++] = c;
+                      }
+                    str[c1] = '\0';
+
+                    /* If isn't a word bracketed by `[:' and `:]':
+                       undo the ending character, the letters, and leave
+                       the leading `:' and `[' (but set bits for them).  */
+                    if (c == ':' && *p == ']')
+                      {
+/* CYGNUS LOCAL: Skip this code if we don't have btowc().  btowc() is */
+/* defined in the 1994 Amendment 1 to ISO C and may not be present on */
+/* systems where we have wchar.h and wctype.h.   */
+#if defined _LIBC || (defined HAVE_WCTYPE_H && defined HAVE_WCHAR_H && defined HAVE_BTOWC)
+                        boolean is_lower = STREQ (str, "lower");
+                        boolean is_upper = STREQ (str, "upper");
+			wctype_t wt;
+                        int ch;
+
+			wt = IS_CHAR_CLASS (str);
+			if (wt == 0)
+			  FREE_STACK_RETURN (REG_ECTYPE);
+
+                        /* Throw away the ] at the end of the character
+                           class.  */
+                        PATFETCH (c);
+
+                        if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
+
+                        for (ch = 0; ch < 1 << BYTEWIDTH; ++ch)
+			  {
+# ifdef _LIBC
+			    if (__iswctype (__btowc (ch), wt))
+			      SET_LIST_BIT (ch);
+#else
+			    if (iswctype (btowc (ch), wt))
+			      SET_LIST_BIT (ch);
+#endif
+
+			    if (translate && (is_upper || is_lower)
+				&& (ISUPPER (ch) || ISLOWER (ch)))
+			      SET_LIST_BIT (ch);
+			  }
+
+                        had_char_class = true;
+#else
+                        int ch;
+                        boolean is_alnum = STREQ (str, "alnum");
+                        boolean is_alpha = STREQ (str, "alpha");
+                        boolean is_blank = STREQ (str, "blank");
+                        boolean is_cntrl = STREQ (str, "cntrl");
+                        boolean is_digit = STREQ (str, "digit");
+                        boolean is_graph = STREQ (str, "graph");
+                        boolean is_lower = STREQ (str, "lower");
+                        boolean is_print = STREQ (str, "print");
+                        boolean is_punct = STREQ (str, "punct");
+                        boolean is_space = STREQ (str, "space");
+                        boolean is_upper = STREQ (str, "upper");
+                        boolean is_xdigit = STREQ (str, "xdigit");
+
+                        if (!IS_CHAR_CLASS (str))
+			  FREE_STACK_RETURN (REG_ECTYPE);
+
+                        /* Throw away the ] at the end of the character
+                           class.  */
+                        PATFETCH (c);
+
+                        if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
+
+                        for (ch = 0; ch < 1 << BYTEWIDTH; ch++)
+                          {
+			    /* This was split into 3 if's to
+			       avoid an arbitrary limit in some compiler.  */
+                            if (   (is_alnum  && ISALNUM (ch))
+                                || (is_alpha  && ISALPHA (ch))
+                                || (is_blank  && ISBLANK (ch))
+                                || (is_cntrl  && ISCNTRL (ch)))
+			      SET_LIST_BIT (ch);
+			    if (   (is_digit  && ISDIGIT (ch))
+                                || (is_graph  && ISGRAPH (ch))
+                                || (is_lower  && ISLOWER (ch))
+                                || (is_print  && ISPRINT (ch)))
+			      SET_LIST_BIT (ch);
+			    if (   (is_punct  && ISPUNCT (ch))
+                                || (is_space  && ISSPACE (ch))
+                                || (is_upper  && ISUPPER (ch))
+                                || (is_xdigit && ISXDIGIT (ch)))
+			      SET_LIST_BIT (ch);
+			    if (   translate && (is_upper || is_lower)
+				&& (ISUPPER (ch) || ISLOWER (ch)))
+			      SET_LIST_BIT (ch);
+                          }
+                        had_char_class = true;
+#endif	/* libc || wctype.h */
+                      }
+                    else
+                      {
+                        c1++;
+                        while (c1--)
+                          PATUNFETCH;
+                        SET_LIST_BIT ('[');
+                        SET_LIST_BIT (':');
+                        had_char_class = false;
+                      }
+                  }
+                else
+                  {
+                    had_char_class = false;
+                    SET_LIST_BIT (c);
+                  }
+              }
+
+            /* Discard any (non)matching list bytes that are all 0 at the
+               end of the map.  Decrease the map-length byte too.  */
+            while ((int) b[-1] > 0 && b[b[-1] - 1] == 0)
+              b[-1]--;
+            b += b[-1];
+          }
+          break;
+
+
+	case '(':
+          if (syntax & RE_NO_BK_PARENS)
+            goto handle_open;
+          else
+            goto normal_char;
+
+
+        case ')':
+          if (syntax & RE_NO_BK_PARENS)
+            goto handle_close;
+          else
+            goto normal_char;
+
+
+        case '\n':
+          if (syntax & RE_NEWLINE_ALT)
+            goto handle_alt;
+          else
+            goto normal_char;
+
+
+	case '|':
+          if (syntax & RE_NO_BK_VBAR)
+            goto handle_alt;
+          else
+            goto normal_char;
+
+
+        case '{':
+           if (syntax & RE_INTERVALS && syntax & RE_NO_BK_BRACES)
+             goto handle_interval;
+           else
+             goto normal_char;
+
+
+        case '\\':
+          if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
+
+          /* Do not translate the character after the \, so that we can
+             distinguish, e.g., \B from \b, even if we normally would
+             translate, e.g., B to b.  */
+          PATFETCH_RAW (c);
+
+          switch (c)
+            {
+            case '(':
+              if (syntax & RE_NO_BK_PARENS)
+                goto normal_backslash;
+
+            handle_open:
+              bufp->re_nsub++;
+              regnum++;
+
+              if (COMPILE_STACK_FULL)
+                {
+                  RETALLOC (compile_stack.stack, compile_stack.size << 1,
+                            compile_stack_elt_t);
+                  if (compile_stack.stack == NULL) return REG_ESPACE;
+
+                  compile_stack.size <<= 1;
+                }
+
+              /* These are the values to restore when we hit end of this
+                 group.  They are all relative offsets, so that if the
+                 whole pattern moves because of realloc, they will still
+                 be valid.  */
+              COMPILE_STACK_TOP.begalt_offset = begalt - bufp->buffer;
+              COMPILE_STACK_TOP.fixup_alt_jump
+                = fixup_alt_jump ? fixup_alt_jump - bufp->buffer + 1 : 0;
+              COMPILE_STACK_TOP.laststart_offset = b - bufp->buffer;
+              COMPILE_STACK_TOP.regnum = regnum;
+
+              /* We will eventually replace the 0 with the number of
+                 groups inner to this one.  But do not push a
+                 start_memory for groups beyond the last one we can
+                 represent in the compiled pattern.  */
+              if (regnum <= MAX_REGNUM)
+                {
+                  COMPILE_STACK_TOP.inner_group_offset = b - bufp->buffer + 2;
+                  BUF_PUSH_3 (start_memory, regnum, 0);
+                }
+
+              compile_stack.avail++;
+
+              fixup_alt_jump = 0;
+              laststart = 0;
+              begalt = b;
+	      /* If we've reached MAX_REGNUM groups, then this open
+		 won't actually generate any code, so we'll have to
+		 clear pending_exact explicitly.  */
+	      pending_exact = 0;
+              break;
+
+
+            case ')':
+              if (syntax & RE_NO_BK_PARENS) goto normal_backslash;
+
+              if (COMPILE_STACK_EMPTY)
+		{
+		  if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
+		    goto normal_backslash;
+		  else
+		    FREE_STACK_RETURN (REG_ERPAREN);
+		}
+
+            handle_close:
+              if (fixup_alt_jump)
+                { /* Push a dummy failure point at the end of the
+                     alternative for a possible future
+                     `pop_failure_jump' to pop.  See comments at
+                     `push_dummy_failure' in `re_match_2'.  */
+                  BUF_PUSH (push_dummy_failure);
+
+                  /* We allocated space for this jump when we assigned
+                     to `fixup_alt_jump', in the `handle_alt' case below.  */
+                  STORE_JUMP (jump_past_alt, fixup_alt_jump, b - 1);
+                }
+
+              /* See similar code for backslashed left paren above.  */
+              if (COMPILE_STACK_EMPTY)
+		{
+		  if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
+		    goto normal_char;
+		  else
+		    FREE_STACK_RETURN (REG_ERPAREN);
+		}
+
+              /* Since we just checked for an empty stack above, this
+                 ``can't happen''.  */
+              assert (compile_stack.avail != 0);
+              {
+                /* We don't just want to restore into `regnum', because
+                   later groups should continue to be numbered higher,
+                   as in `(ab)c(de)' -- the second group is #2.  */
+                regnum_t this_group_regnum;
+
+                compile_stack.avail--;
+                begalt = bufp->buffer + COMPILE_STACK_TOP.begalt_offset;
+                fixup_alt_jump
+                  = COMPILE_STACK_TOP.fixup_alt_jump
+                    ? bufp->buffer + COMPILE_STACK_TOP.fixup_alt_jump - 1
+                    : 0;
+                laststart = bufp->buffer + COMPILE_STACK_TOP.laststart_offset;
+                this_group_regnum = COMPILE_STACK_TOP.regnum;
+		/* If we've reached MAX_REGNUM groups, then this open
+		   won't actually generate any code, so we'll have to
+		   clear pending_exact explicitly.  */
+		pending_exact = 0;
+
+                /* We're at the end of the group, so now we know how many
+                   groups were inside this one.  */
+                if (this_group_regnum <= MAX_REGNUM)
+                  {
+                    unsigned char *inner_group_loc
+                      = bufp->buffer + COMPILE_STACK_TOP.inner_group_offset;
+
+                    *inner_group_loc = regnum - this_group_regnum;
+                    BUF_PUSH_3 (stop_memory, this_group_regnum,
+                                regnum - this_group_regnum);
+                  }
+              }
+              break;
+
+
+            case '|':					/* `\|'.  */
+              if (syntax & RE_LIMITED_OPS || syntax & RE_NO_BK_VBAR)
+                goto normal_backslash;
+            handle_alt:
+              if (syntax & RE_LIMITED_OPS)
+                goto normal_char;
+
+              /* Insert before the previous alternative a jump which
+                 jumps to this alternative if the former fails.  */
+              GET_BUFFER_SPACE (3);
+              INSERT_JUMP (on_failure_jump, begalt, b + 6);
+              pending_exact = 0;
+              b += 3;
+
+              /* The alternative before this one has a jump after it
+                 which gets executed if it gets matched.  Adjust that
+                 jump so it will jump to this alternative's analogous
+                 jump (put in below, which in turn will jump to the next
+                 (if any) alternative's such jump, etc.).  The last such
+                 jump jumps to the correct final destination.  A picture:
+                          _____ _____
+                          |   | |   |
+                          |   v |   v
+                         a | b   | c
+
+                 If we are at `b', then fixup_alt_jump right now points to a
+                 three-byte space after `a'.  We'll put in the jump, set
+                 fixup_alt_jump to right after `b', and leave behind three
+                 bytes which we'll fill in when we get to after `c'.  */
+
+              if (fixup_alt_jump)
+                STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
+
+              /* Mark and leave space for a jump after this alternative,
+                 to be filled in later either by next alternative or
+                 when know we're at the end of a series of alternatives.  */
+              fixup_alt_jump = b;
+              GET_BUFFER_SPACE (3);
+              b += 3;
+
+              laststart = 0;
+              begalt = b;
+              break;
+
+
+            case '{':
+              /* If \{ is a literal.  */
+              if (!(syntax & RE_INTERVALS)
+                     /* If we're at `\{' and it's not the open-interval
+                        operator.  */
+                  || ((syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
+                  || (p - 2 == pattern  &&  p == pend))
+                goto normal_backslash;
+
+            handle_interval:
+              {
+                /* If got here, then the syntax allows intervals.  */
+
+                /* At least (most) this many matches must be made.  */
+                int lower_bound = -1, upper_bound = -1;
+
+                beg_interval = p - 1;
+
+                if (p == pend)
+                  {
+                    if (syntax & RE_NO_BK_BRACES)
+                      goto unfetch_interval;
+                    else
+                      FREE_STACK_RETURN (REG_EBRACE);
+                  }
+
+                GET_UNSIGNED_NUMBER (lower_bound);
+
+                if (c == ',')
+                  {
+                    GET_UNSIGNED_NUMBER (upper_bound);
+                    if (upper_bound < 0) upper_bound = RE_DUP_MAX;
+                  }
+                else
+                  /* Interval such as `{1}' => match exactly once. */
+                  upper_bound = lower_bound;
+
+                if (lower_bound < 0 || upper_bound > RE_DUP_MAX
+                    || lower_bound > upper_bound)
+                  {
+                    if (syntax & RE_NO_BK_BRACES)
+                      goto unfetch_interval;
+                    else
+                      FREE_STACK_RETURN (REG_BADBR);
+                  }
+
+                if (!(syntax & RE_NO_BK_BRACES))
+                  {
+                    if (c != '\\') FREE_STACK_RETURN (REG_EBRACE);
+
+                    PATFETCH (c);
+                  }
+
+                if (c != '}')
+                  {
+                    if (syntax & RE_NO_BK_BRACES)
+                      goto unfetch_interval;
+                    else
+                      FREE_STACK_RETURN (REG_BADBR);
+                  }
+
+                /* We just parsed a valid interval.  */
+
+                /* If it's invalid to have no preceding re.  */
+                if (!laststart)
+                  {
+                    if (syntax & RE_CONTEXT_INVALID_OPS)
+                      FREE_STACK_RETURN (REG_BADRPT);
+                    else if (syntax & RE_CONTEXT_INDEP_OPS)
+                      laststart = b;
+                    else
+                      goto unfetch_interval;
+                  }
+
+                /* If the upper bound is zero, don't want to succeed at
+                   all; jump from `laststart' to `b + 3', which will be
+                   the end of the buffer after we insert the jump.  */
+                 if (upper_bound == 0)
+                   {
+                     GET_BUFFER_SPACE (3);
+                     INSERT_JUMP (jump, laststart, b + 3);
+                     b += 3;
+                   }
+
+                 /* Otherwise, we have a nontrivial interval.  When
+                    we're all done, the pattern will look like:
+                      set_number_at <jump count> <upper bound>
+                      set_number_at <succeed_n count> <lower bound>
+                      succeed_n <after jump addr> <succeed_n count>
+                      <body of loop>
+                      jump_n <succeed_n addr> <jump count>
+                    (The upper bound and `jump_n' are omitted if
+                    `upper_bound' is 1, though.)  */
+                 else
+                   { /* If the upper bound is > 1, we need to insert
+                        more at the end of the loop.  */
+                     unsigned nbytes = 10 + (upper_bound > 1) * 10;
+
+                     GET_BUFFER_SPACE (nbytes);
+
+                     /* Initialize lower bound of the `succeed_n', even
+                        though it will be set during matching by its
+                        attendant `set_number_at' (inserted next),
+                        because `re_compile_fastmap' needs to know.
+                        Jump to the `jump_n' we might insert below.  */
+                     INSERT_JUMP2 (succeed_n, laststart,
+                                   b + 5 + (upper_bound > 1) * 5,
+                                   lower_bound);
+                     b += 5;
+
+                     /* Code to initialize the lower bound.  Insert
+                        before the `succeed_n'.  The `5' is the last two
+                        bytes of this `set_number_at', plus 3 bytes of
+                        the following `succeed_n'.  */
+                     insert_op2 (set_number_at, laststart, 5, lower_bound, b);
+                     b += 5;
+
+                     if (upper_bound > 1)
+                       { /* More than one repetition is allowed, so
+                            append a backward jump to the `succeed_n'
+                            that starts this interval.
+
+                            When we've reached this during matching,
+                            we'll have matched the interval once, so
+                            jump back only `upper_bound - 1' times.  */
+                         STORE_JUMP2 (jump_n, b, laststart + 5,
+                                      upper_bound - 1);
+                         b += 5;
+
+                         /* The location we want to set is the second
+                            parameter of the `jump_n'; that is `b-2' as
+                            an absolute address.  `laststart' will be
+                            the `set_number_at' we're about to insert;
+                            `laststart+3' the number to set, the source
+                            for the relative address.  But we are
+                            inserting into the middle of the pattern --
+                            so everything is getting moved up by 5.
+                            Conclusion: (b - 2) - (laststart + 3) + 5,
+                            i.e., b - laststart.
+
+                            We insert this at the beginning of the loop
+                            so that if we fail during matching, we'll
+                            reinitialize the bounds.  */
+                         insert_op2 (set_number_at, laststart, b - laststart,
+                                     upper_bound - 1, b);
+                         b += 5;
+                       }
+                   }
+                pending_exact = 0;
+                beg_interval = NULL;
+              }
+              break;
+
+            unfetch_interval:
+              /* If an invalid interval, match the characters as literals.  */
+               assert (beg_interval);
+               p = beg_interval;
+               beg_interval = NULL;
+
+               /* normal_char and normal_backslash need `c'.  */
+               PATFETCH (c);
+
+               if (!(syntax & RE_NO_BK_BRACES))
+                 {
+                   if (p > pattern  &&  p[-1] == '\\')
+                     goto normal_backslash;
+                 }
+               goto normal_char;
+
+#ifdef emacs
+            /* There is no way to specify the before_dot and after_dot
+               operators.  rms says this is ok.  --karl  */
+            case '=':
+              BUF_PUSH (at_dot);
+              break;
+
+            case 's':
+              laststart = b;
+              PATFETCH (c);
+              BUF_PUSH_2 (syntaxspec, syntax_spec_code[c]);
+              break;
+
+            case 'S':
+              laststart = b;
+              PATFETCH (c);
+              BUF_PUSH_2 (notsyntaxspec, syntax_spec_code[c]);
+              break;
+#endif /* emacs */
+
+
+            case 'w':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              laststart = b;
+              BUF_PUSH (wordchar);
+              break;
+
+
+            case 'W':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              laststart = b;
+              BUF_PUSH (notwordchar);
+              break;
+
+
+            case '<':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (wordbeg);
+              break;
+
+            case '>':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (wordend);
+              break;
+
+            case 'b':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (wordbound);
+              break;
+
+            case 'B':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (notwordbound);
+              break;
+
+            case '`':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (begbuf);
+              break;
+
+            case '\'':
+	      if (syntax & RE_NO_GNU_OPS)
+		goto normal_char;
+              BUF_PUSH (endbuf);
+              break;
+
+            case '1': case '2': case '3': case '4': case '5':
+            case '6': case '7': case '8': case '9':
+              if (syntax & RE_NO_BK_REFS)
+                goto normal_char;
+
+              c1 = c - '0';
+
+              if (c1 > regnum)
+                FREE_STACK_RETURN (REG_ESUBREG);
+
+              /* Can't back reference to a subexpression if inside of it.  */
+              if (group_in_compile_stack (compile_stack, (regnum_t) c1))
+                goto normal_char;
+
+              laststart = b;
+              BUF_PUSH_2 (duplicate, c1);
+              break;
+
+
+            case '+':
+            case '?':
+              if (syntax & RE_BK_PLUS_QM)
+                goto handle_plus;
+              else
+                goto normal_backslash;
+
+            default:
+            normal_backslash:
+              /* You might think it would be useful for \ to mean
+                 not to translate; but if we don't translate it
+                 it will never match anything.  */
+              c = TRANSLATE (c);
+              goto normal_char;
+            }
+          break;
+
+
+	default:
+        /* Expects the character in `c'.  */
+	normal_char:
+	      /* If no exactn currently being built.  */
+          if (!pending_exact
+
+              /* If last exactn not at current position.  */
+              || pending_exact + *pending_exact + 1 != b
+
+              /* We have only one byte following the exactn for the count.  */
+	      || *pending_exact == (1 << BYTEWIDTH) - 1
+
+              /* If followed by a repetition operator.  */
+              || *p == '*' || *p == '^'
+	      || ((syntax & RE_BK_PLUS_QM)
+		  ? *p == '\\' && (p[1] == '+' || p[1] == '?')
+		  : (*p == '+' || *p == '?'))
+	      || ((syntax & RE_INTERVALS)
+                  && ((syntax & RE_NO_BK_BRACES)
+		      ? *p == '{'
+                      : (p[0] == '\\' && p[1] == '{'))))
+	    {
+	      /* Start building a new exactn.  */
+
+              laststart = b;
+
+	      BUF_PUSH_2 (exactn, 0);
+	      pending_exact = b - 1;
+            }
+
+	  BUF_PUSH (c);
+          (*pending_exact)++;
+	  break;
+        } /* switch (c) */
+    } /* while p != pend */
+
+
+  /* Through the pattern now.  */
+
+  if (fixup_alt_jump)
+    STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
+
+  if (!COMPILE_STACK_EMPTY)
+    FREE_STACK_RETURN (REG_EPAREN);
+
+  /* If we don't want backtracking, force success
+     the first time we reach the end of the compiled pattern.  */
+  if (syntax & RE_NO_POSIX_BACKTRACKING)
+    BUF_PUSH (succeed);
+
+  free (compile_stack.stack);
+
+  /* We have succeeded; set the length of the buffer.  */
+  bufp->used = b - bufp->buffer;
+
+#ifdef DEBUG
+  if (debug)
+    {
+      DEBUG_PRINT1 ("\nCompiled pattern: \n");
+      print_compiled_pattern (bufp);
+    }
+#endif /* DEBUG */
+
+#ifndef MATCH_MAY_ALLOCATE
+  /* Initialize the failure stack to the largest possible stack.  This
+     isn't necessary unless we're trying to avoid calling alloca in
+     the search and match routines.  */
+  {
+    int num_regs = bufp->re_nsub + 1;
+
+    /* Since DOUBLE_FAIL_STACK refuses to double only if the current size
+       is strictly greater than re_max_failures, the largest possible stack
+       is 2 * re_max_failures failure points.  */
+    if (fail_stack.size < (2 * re_max_failures * MAX_FAILURE_ITEMS))
+      {
+	fail_stack.size = (2 * re_max_failures * MAX_FAILURE_ITEMS);
+
+# ifdef emacs
+	if (! fail_stack.stack)
+	  fail_stack.stack
+	    = (fail_stack_elt_t *) xmalloc (fail_stack.size
+					    * sizeof (fail_stack_elt_t));
+	else
+	  fail_stack.stack
+	    = (fail_stack_elt_t *) xrealloc (fail_stack.stack,
+					     (fail_stack.size
+					      * sizeof (fail_stack_elt_t)));
+# else /* not emacs */
+	if (! fail_stack.stack)
+	  fail_stack.stack
+	    = (fail_stack_elt_t *) malloc (fail_stack.size
+					   * sizeof (fail_stack_elt_t));
+	else
+	  fail_stack.stack
+	    = (fail_stack_elt_t *) realloc (fail_stack.stack,
+					    (fail_stack.size
+					     * sizeof (fail_stack_elt_t)));
+# endif /* not emacs */
+      }
+
+    regex_grow_registers (num_regs);
+  }
+#endif /* not MATCH_MAY_ALLOCATE */
+
+  return REG_NOERROR;
+} /* regex_compile */
+
+/* Subroutines for `regex_compile'.  */
+
+/* Store OP at LOC followed by two-byte integer parameter ARG.  */
+
+static void
+store_op1 (op, loc, arg)
+    re_opcode_t op;
+    unsigned char *loc;
+    int arg;
+{
+  *loc = (unsigned char) op;
+  STORE_NUMBER (loc + 1, arg);
+}
+
+
+/* Like `store_op1', but for two two-byte parameters ARG1 and ARG2.  */
+
+static void
+store_op2 (op, loc, arg1, arg2)
+    re_opcode_t op;
+    unsigned char *loc;
+    int arg1, arg2;
+{
+  *loc = (unsigned char) op;
+  STORE_NUMBER (loc + 1, arg1);
+  STORE_NUMBER (loc + 3, arg2);
+}
+
+
+/* Copy the bytes from LOC to END to open up three bytes of space at LOC
+   for OP followed by two-byte integer parameter ARG.  */
+
+static void
+insert_op1 (op, loc, arg, end)
+    re_opcode_t op;
+    unsigned char *loc;
+    int arg;
+    unsigned char *end;
+{
+  register unsigned char *pfrom = end;
+  register unsigned char *pto = end + 3;
+
+  while (pfrom != loc)
+    *--pto = *--pfrom;
+
+  store_op1 (op, loc, arg);
+}
+
+
+/* Like `insert_op1', but for two two-byte parameters ARG1 and ARG2.  */
+
+static void
+insert_op2 (op, loc, arg1, arg2, end)
+    re_opcode_t op;
+    unsigned char *loc;
+    int arg1, arg2;
+    unsigned char *end;
+{
+  register unsigned char *pfrom = end;
+  register unsigned char *pto = end + 5;
+
+  while (pfrom != loc)
+    *--pto = *--pfrom;
+
+  store_op2 (op, loc, arg1, arg2);
+}
+
+
+/* P points to just after a ^ in PATTERN.  Return true if that ^ comes
+   after an alternative or a begin-subexpression.  We assume there is at
+   least one character before the ^.  */
+
+static boolean
+at_begline_loc_p (pattern, p, syntax)
+    const char *pattern, *p;
+    reg_syntax_t syntax;
+{
+  const char *prev = p - 2;
+  boolean prev_prev_backslash = prev > pattern && prev[-1] == '\\';
+
+  return
+       /* After a subexpression?  */
+       (*prev == '(' && (syntax & RE_NO_BK_PARENS || prev_prev_backslash))
+       /* After an alternative?  */
+    || (*prev == '|' && (syntax & RE_NO_BK_VBAR || prev_prev_backslash));
+}
+
+
+/* The dual of at_begline_loc_p.  This one is for $.  We assume there is
+   at least one character after the $, i.e., `P < PEND'.  */
+
+static boolean
+at_endline_loc_p (p, pend, syntax)
+    const char *p, *pend;
+    reg_syntax_t syntax;
+{
+  const char *next = p;
+  boolean next_backslash = *next == '\\';
+  const char *next_next = p + 1 < pend ? p + 1 : 0;
+
+  return
+       /* Before a subexpression?  */
+       (syntax & RE_NO_BK_PARENS ? *next == ')'
+        : next_backslash && next_next && *next_next == ')')
+       /* Before an alternative?  */
+    || (syntax & RE_NO_BK_VBAR ? *next == '|'
+        : next_backslash && next_next && *next_next == '|');
+}
+
+
+/* Returns true if REGNUM is in one of COMPILE_STACK's elements and
+   false if it's not.  */
+
+static boolean
+group_in_compile_stack (compile_stack, regnum)
+    compile_stack_type compile_stack;
+    regnum_t regnum;
+{
+  int this_element;
+
+  for (this_element = compile_stack.avail - 1;
+       this_element >= 0;
+       this_element--)
+    if (compile_stack.stack[this_element].regnum == regnum)
+      return true;
+
+  return false;
+}
+
+
+/* Read the ending character of a range (in a bracket expression) from the
+   uncompiled pattern *P_PTR (which ends at PEND).  We assume the
+   starting character is in `P[-2]'.  (`P[-1]' is the character `-'.)
+   Then we set the translation of all bits between the starting and
+   ending characters (inclusive) in the compiled pattern B.
+
+   Return an error code.
+
+   We use these short variable names so we can use the same macros as
+   `regex_compile' itself.  */
+
+static reg_errcode_t
+compile_range (p_ptr, pend, translate, syntax, b)
+    const char **p_ptr, *pend;
+    RE_TRANSLATE_TYPE translate;
+    reg_syntax_t syntax;
+    unsigned char *b;
+{
+  unsigned this_char;
+
+  const char *p = *p_ptr;
+  unsigned int range_start, range_end;
+
+  if (p == pend)
+    return REG_ERANGE;
+
+  /* Even though the pattern is a signed `char *', we need to fetch
+     with unsigned char *'s; if the high bit of the pattern character
+     is set, the range endpoints will be negative if we fetch using a
+     signed char *.
+
+     We also want to fetch the endpoints without translating them; the
+     appropriate translation is done in the bit-setting loop below.  */
+  /* The SVR4 compiler on the 3B2 had trouble with unsigned const char *.  */
+  range_start = ((const unsigned char *) p)[-2];
+  range_end   = ((const unsigned char *) p)[0];
+
+  /* Have to increment the pointer into the pattern string, so the
+     caller isn't still at the ending character.  */
+  (*p_ptr)++;
+
+  /* If the start is after the end, the range is empty.  */
+  if (range_start > range_end)
+    return syntax & RE_NO_EMPTY_RANGES ? REG_ERANGE : REG_NOERROR;
+
+  /* Here we see why `this_char' has to be larger than an `unsigned
+     char' -- the range is inclusive, so if `range_end' == 0xff
+     (assuming 8-bit characters), we would otherwise go into an infinite
+     loop, since all characters <= 0xff.  */
+  for (this_char = range_start; this_char <= range_end; this_char++)
+    {
+      SET_LIST_BIT (TRANSLATE (this_char));
+    }
+
+  return REG_NOERROR;
+}
+
+/* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in
+   BUFP.  A fastmap records which of the (1 << BYTEWIDTH) possible
+   characters can start a string that matches the pattern.  This fastmap
+   is used by re_search to skip quickly over impossible starting points.
+
+   The caller must supply the address of a (1 << BYTEWIDTH)-byte data
+   area as BUFP->fastmap.
+
+   We set the `fastmap', `fastmap_accurate', and `can_be_null' fields in
+   the pattern buffer.
+
+   Returns 0 if we succeed, -2 if an internal error.   */
+
+int
+re_compile_fastmap (bufp)
+     struct re_pattern_buffer *bufp;
+{
+  int j, k;
+#ifdef MATCH_MAY_ALLOCATE
+  fail_stack_type fail_stack;
+#endif
+#ifndef REGEX_MALLOC
+  char *destination;
+#endif
+
+  register char *fastmap = bufp->fastmap;
+  unsigned char *pattern = bufp->buffer;
+  unsigned char *p = pattern;
+  register unsigned char *pend = pattern + bufp->used;
+
+#ifdef REL_ALLOC
+  /* This holds the pointer to the failure stack, when
+     it is allocated relocatably.  */
+  fail_stack_elt_t *failure_stack_ptr;
+#endif
+
+  /* Assume that each path through the pattern can be null until
+     proven otherwise.  We set this false at the bottom of switch
+     statement, to which we get only if a particular path doesn't
+     match the empty string.  */
+  boolean path_can_be_null = true;
+
+  /* We aren't doing a `succeed_n' to begin with.  */
+  boolean succeed_n_p = false;
+
+  assert (fastmap != NULL && p != NULL);
+
+  INIT_FAIL_STACK ();
+  bzero (fastmap, 1 << BYTEWIDTH);  /* Assume nothing's valid.  */
+  bufp->fastmap_accurate = 1;	    /* It will be when we're done.  */
+  bufp->can_be_null = 0;
+
+  while (1)
+    {
+      if (p == pend || *p == succeed)
+	{
+	  /* We have reached the (effective) end of pattern.  */
+	  if (!FAIL_STACK_EMPTY ())
+	    {
+	      bufp->can_be_null |= path_can_be_null;
+
+	      /* Reset for next path.  */
+	      path_can_be_null = true;
+
+	      p = fail_stack.stack[--fail_stack.avail].pointer;
+
+	      continue;
+	    }
+	  else
+	    break;
+	}
+
+      /* We should never be about to go beyond the end of the pattern.  */
+      assert (p < pend);
+
+      switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
+	{
+
+        /* I guess the idea here is to simply not bother with a fastmap
+           if a backreference is used, since it's too hard to figure out
+           the fastmap for the corresponding group.  Setting
+           `can_be_null' stops `re_search_2' from using the fastmap, so
+           that is all we do.  */
+	case duplicate:
+	  bufp->can_be_null = 1;
+          goto done;
+
+
+      /* Following are the cases which match a character.  These end
+         with `break'.  */
+
+	case exactn:
+          fastmap[p[1]] = 1;
+	  break;
+
+
+        case charset:
+          for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
+	    if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
+              fastmap[j] = 1;
+	  break;
+
+
+	case charset_not:
+	  /* Chars beyond end of map must be allowed.  */
+	  for (j = *p * BYTEWIDTH; j < (1 << BYTEWIDTH); j++)
+            fastmap[j] = 1;
+
+	  for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
+	    if (!(p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH))))
+              fastmap[j] = 1;
+          break;
+
+
+	case wordchar:
+	  for (j = 0; j < (1 << BYTEWIDTH); j++)
+	    if (SYNTAX (j) == Sword)
+	      fastmap[j] = 1;
+	  break;
+
+
+	case notwordchar:
+	  for (j = 0; j < (1 << BYTEWIDTH); j++)
+	    if (SYNTAX (j) != Sword)
+	      fastmap[j] = 1;
+	  break;
+
+
+        case anychar:
+	  {
+	    int fastmap_newline = fastmap['\n'];
+
+	    /* `.' matches anything ...  */
+	    for (j = 0; j < (1 << BYTEWIDTH); j++)
+	      fastmap[j] = 1;
+
+	    /* ... except perhaps newline.  */
+	    if (!(bufp->syntax & RE_DOT_NEWLINE))
+	      fastmap['\n'] = fastmap_newline;
+
+	    /* Return if we have already set `can_be_null'; if we have,
+	       then the fastmap is irrelevant.  Something's wrong here.  */
+	    else if (bufp->can_be_null)
+	      goto done;
+
+	    /* Otherwise, have to check alternative paths.  */
+	    break;
+	  }
+
+#ifdef emacs
+        case syntaxspec:
+	  k = *p++;
+	  for (j = 0; j < (1 << BYTEWIDTH); j++)
+	    if (SYNTAX (j) == (enum syntaxcode) k)
+	      fastmap[j] = 1;
+	  break;
+
+
+	case notsyntaxspec:
+	  k = *p++;
+	  for (j = 0; j < (1 << BYTEWIDTH); j++)
+	    if (SYNTAX (j) != (enum syntaxcode) k)
+	      fastmap[j] = 1;
+	  break;
+
+
+      /* All cases after this match the empty string.  These end with
+         `continue'.  */
+
+
+	case before_dot:
+	case at_dot:
+	case after_dot:
+          continue;
+#endif /* emacs */
+
+
+        case no_op:
+        case begline:
+        case endline:
+	case begbuf:
+	case endbuf:
+	case wordbound:
+	case notwordbound:
+	case wordbeg:
+	case wordend:
+        case push_dummy_failure:
+          continue;
+
+
+	case jump_n:
+        case pop_failure_jump:
+	case maybe_pop_jump:
+	case jump:
+        case jump_past_alt:
+	case dummy_failure_jump:
+          EXTRACT_NUMBER_AND_INCR (j, p);
+	  p += j;
+	  if (j > 0)
+	    continue;
+
+          /* Jump backward implies we just went through the body of a
+             loop and matched nothing.  Opcode jumped to should be
+             `on_failure_jump' or `succeed_n'.  Just treat it like an
+             ordinary jump.  For a * loop, it has pushed its failure
+             point already; if so, discard that as redundant.  */
+          if ((re_opcode_t) *p != on_failure_jump
+	      && (re_opcode_t) *p != succeed_n)
+	    continue;
+
+          p++;
+          EXTRACT_NUMBER_AND_INCR (j, p);
+          p += j;
+
+          /* If what's on the stack is where we are now, pop it.  */
+          if (!FAIL_STACK_EMPTY ()
+	      && fail_stack.stack[fail_stack.avail - 1].pointer == p)
+            fail_stack.avail--;
+
+          continue;
+
+
+        case on_failure_jump:
+        case on_failure_keep_string_jump:
+	handle_on_failure_jump:
+          EXTRACT_NUMBER_AND_INCR (j, p);
+
+          /* For some patterns, e.g., `(a?)?', `p+j' here points to the
+             end of the pattern.  We don't want to push such a point,
+             since when we restore it above, entering the switch will
+             increment `p' past the end of the pattern.  We don't need
+             to push such a point since we obviously won't find any more
+             fastmap entries beyond `pend'.  Such a pattern can match
+             the null string, though.  */
+          if (p + j < pend)
+            {
+              if (!PUSH_PATTERN_OP (p + j, fail_stack))
+		{
+		  RESET_FAIL_STACK ();
+		  return -2;
+		}
+            }
+          else
+            bufp->can_be_null = 1;
+
+          if (succeed_n_p)
+            {
+              EXTRACT_NUMBER_AND_INCR (k, p);	/* Skip the n.  */
+              succeed_n_p = false;
+	    }
+
+          continue;
+
+
+	case succeed_n:
+          /* Get to the number of times to succeed.  */
+          p += 2;
+
+          /* Increment p past the n for when k != 0.  */
+          EXTRACT_NUMBER_AND_INCR (k, p);
+          if (k == 0)
+	    {
+              p -= 4;
+  	      succeed_n_p = true;  /* Spaghetti code alert.  */
+              goto handle_on_failure_jump;
+            }
+          continue;
+
+
+	case set_number_at:
+          p += 4;
+          continue;
+
+
+	case start_memory:
+        case stop_memory:
+	  p += 2;
+	  continue;
+
+
+	default:
+          abort (); /* We have listed all the cases.  */
+        } /* switch *p++ */
+
+      /* Getting here means we have found the possible starting
+         characters for one path of the pattern -- and that the empty
+         string does not match.  We need not follow this path further.
+         Instead, look at the next alternative (remembered on the
+         stack), or quit if no more.  The test at the top of the loop
+         does these things.  */
+      path_can_be_null = false;
+      p = pend;
+    } /* while p */
+
+  /* Set `can_be_null' for the last path (also the first path, if the
+     pattern is empty).  */
+  bufp->can_be_null |= path_can_be_null;
+
+ done:
+  RESET_FAIL_STACK ();
+  return 0;
+} /* re_compile_fastmap */
+#ifdef _LIBC
+weak_alias (__re_compile_fastmap, re_compile_fastmap)
+#endif
+
+/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
+   ENDS.  Subsequent matches using PATTERN_BUFFER and REGS will use
+   this memory for recording register information.  STARTS and ENDS
+   must be allocated using the malloc library routine, and must each
+   be at least NUM_REGS * sizeof (regoff_t) bytes long.
+
+   If NUM_REGS == 0, then subsequent matches should allocate their own
+   register data.
+
+   Unless this function is called, the first search or match using
+   PATTERN_BUFFER will allocate its own register data, without
+   freeing the old data.  */
+
+void
+re_set_registers (bufp, regs, num_regs, starts, ends)
+    struct re_pattern_buffer *bufp;
+    struct re_registers *regs;
+    unsigned num_regs;
+    regoff_t *starts, *ends;
+{
+  if (num_regs)
+    {
+      bufp->regs_allocated = REGS_REALLOCATE;
+      regs->num_regs = num_regs;
+      regs->start = starts;
+      regs->end = ends;
+    }
+  else
+    {
+      bufp->regs_allocated = REGS_UNALLOCATED;
+      regs->num_regs = 0;
+      regs->start = regs->end = (regoff_t *) 0;
+    }
+}
+#ifdef _LIBC
+weak_alias (__re_set_registers, re_set_registers)
+#endif
+
+/* Searching routines.  */
+
+/* Like re_search_2, below, but only one string is specified, and
+   doesn't let you say where to stop matching. */
+
+int
+re_search (bufp, string, size, startpos, range, regs)
+     struct re_pattern_buffer *bufp;
+     const char *string;
+     int size, startpos, range;
+     struct re_registers *regs;
+{
+  return re_search_2 (bufp, NULL, 0, string, size, startpos, range,
+		      regs, size);
+}
+#ifdef _LIBC
+weak_alias (__re_search, re_search)
+#endif
+
+
+/* Using the compiled pattern in BUFP->buffer, first tries to match the
+   virtual concatenation of STRING1 and STRING2, starting first at index
+   STARTPOS, then at STARTPOS + 1, and so on.
+
+   STRING1 and STRING2 have length SIZE1 and SIZE2, respectively.
+
+   RANGE is how far to scan while trying to match.  RANGE = 0 means try
+   only at STARTPOS; in general, the last start tried is STARTPOS +
+   RANGE.
+
+   In REGS, return the indices of the virtual concatenation of STRING1
+   and STRING2 that matched the entire BUFP->buffer and its contained
+   subexpressions.
+
+   Do not consider matching one past the index STOP in the virtual
+   concatenation of STRING1 and STRING2.
+
+   We return either the position in the strings at which the match was
+   found, -1 if no match, or -2 if error (such as failure
+   stack overflow).  */
+
+int
+re_search_2 (bufp, string1, size1, string2, size2, startpos, range, regs, stop)
+     struct re_pattern_buffer *bufp;
+     const char *string1, *string2;
+     int size1, size2;
+     int startpos;
+     int range;
+     struct re_registers *regs;
+     int stop;
+{
+  int val;
+  register char *fastmap = bufp->fastmap;
+  register RE_TRANSLATE_TYPE translate = bufp->translate;
+  int total_size = size1 + size2;
+  int endpos = startpos + range;
+
+  /* Check for out-of-range STARTPOS.  */
+  if (startpos < 0 || startpos > total_size)
+    return -1;
+
+  /* Fix up RANGE if it might eventually take us outside
+     the virtual concatenation of STRING1 and STRING2.
+     Make sure we won't move STARTPOS below 0 or above TOTAL_SIZE.  */
+  if (endpos < 0)
+    range = 0 - startpos;
+  else if (endpos > total_size)
+    range = total_size - startpos;
+
+  /* If the search isn't to be a backwards one, don't waste time in a
+     search for a pattern that must be anchored.  */
+  if (bufp->used > 0 && (re_opcode_t) bufp->buffer[0] == begbuf && range > 0)
+    {
+      if (startpos > 0)
+	return -1;
+      else
+	range = 1;
+    }
+
+#ifdef emacs
+  /* In a forward search for something that starts with \=.
+     don't keep searching past point.  */
+  if (bufp->used > 0 && (re_opcode_t) bufp->buffer[0] == at_dot && range > 0)
+    {
+      range = PT - startpos;
+      if (range <= 0)
+	return -1;
+    }
+#endif /* emacs */
+
+  /* Update the fastmap now if not correct already.  */
+  if (fastmap && !bufp->fastmap_accurate)
+    if (re_compile_fastmap (bufp) == -2)
+      return -2;
+
+  /* Loop through the string, looking for a place to start matching.  */
+  for (;;)
+    {
+      /* If a fastmap is supplied, skip quickly over characters that
+         cannot be the start of a match.  If the pattern can match the
+         null string, however, we don't need to skip characters; we want
+         the first null string.  */
+      if (fastmap && startpos < total_size && !bufp->can_be_null)
+	{
+	  if (range > 0)	/* Searching forwards.  */
+	    {
+	      register const char *d;
+	      register int lim = 0;
+	      int irange = range;
+
+              if (startpos < size1 && startpos + range >= size1)
+                lim = range - (size1 - startpos);
+
+	      d = (startpos >= size1 ? string2 - size1 : string1) + startpos;
+
+              /* Written out as an if-else to avoid testing `translate'
+                 inside the loop.  */
+	      if (translate)
+                while (range > lim
+                       && !fastmap[(unsigned char)
+				   translate[(unsigned char) *d++]])
+                  range--;
+	      else
+                while (range > lim && !fastmap[(unsigned char) *d++])
+                  range--;
+
+	      startpos += irange - range;
+	    }
+	  else				/* Searching backwards.  */
+	    {
+	      register char c = (size1 == 0 || startpos >= size1
+                                 ? string2[startpos - size1]
+                                 : string1[startpos]);
+
+	      if (!fastmap[(unsigned char) TRANSLATE (c)])
+		goto advance;
+	    }
+	}
+
+      /* If can't match the null string, and that's all we have left, fail.  */
+      if (range >= 0 && startpos == total_size && fastmap
+          && !bufp->can_be_null)
+	return -1;
+
+      val = re_match_2_internal (bufp, string1, size1, string2, size2,
+				 startpos, regs, stop);
+#ifndef REGEX_MALLOC
+# ifdef C_ALLOCA
+      alloca (0);
+# endif
+#endif
+
+      if (val >= 0)
+	return startpos;
+
+      if (val == -2)
+	return -2;
+
+    advance:
+      if (!range)
+        break;
+      else if (range > 0)
+        {
+          range--;
+          startpos++;
+        }
+      else
+        {
+          range++;
+          startpos--;
+        }
+    }
+  return -1;
+} /* re_search_2 */
+#ifdef _LIBC
+weak_alias (__re_search_2, re_search_2)
+#endif
+
+/* This converts PTR, a pointer into one of the search strings `string1'
+   and `string2' into an offset from the beginning of that string.  */
+#define POINTER_TO_OFFSET(ptr)			\
+  (FIRST_STRING_P (ptr)				\
+   ? ((regoff_t) ((ptr) - string1))		\
+   : ((regoff_t) ((ptr) - string2 + size1)))
+
+/* Macros for dealing with the split strings in re_match_2.  */
+
+#define MATCHING_IN_FIRST_STRING  (dend == end_match_1)
+
+/* Call before fetching a character with *d.  This switches over to
+   string2 if necessary.  */
+#define PREFETCH()							\
+  while (d == dend)						    	\
+    {									\
+      /* End of string2 => fail.  */					\
+      if (dend == end_match_2) 						\
+        goto fail;							\
+      /* End of string1 => advance to string2.  */ 			\
+      d = string2;						        \
+      dend = end_match_2;						\
+    }
+
+
+/* Test if at very beginning or at very end of the virtual concatenation
+   of `string1' and `string2'.  If only one string, it's `string2'.  */
+#define AT_STRINGS_BEG(d) ((d) == (size1 ? string1 : string2) || !size2)
+#define AT_STRINGS_END(d) ((d) == end2)
+
+
+/* Test if D points to a character which is word-constituent.  We have
+   two special cases to check for: if past the end of string1, look at
+   the first character in string2; and if before the beginning of
+   string2, look at the last character in string1.  */
+#define WORDCHAR_P(d)							\
+  (SYNTAX ((d) == end1 ? *string2					\
+           : (d) == string2 - 1 ? *(end1 - 1) : *(d))			\
+   == Sword)
+
+/* Disabled due to a compiler bug -- see comment at case wordbound */
+#if 0
+/* Test if the character before D and the one at D differ with respect
+   to being word-constituent.  */
+#define AT_WORD_BOUNDARY(d)						\
+  (AT_STRINGS_BEG (d) || AT_STRINGS_END (d)				\
+   || WORDCHAR_P (d - 1) != WORDCHAR_P (d))
+#endif
+
+/* Free everything we malloc.  */
+#ifdef MATCH_MAY_ALLOCATE
+# define FREE_VAR(var) if (var) REGEX_FREE (var); var = NULL
+# define FREE_VARIABLES()						\
+  do {									\
+    REGEX_FREE_STACK (fail_stack.stack);				\
+    FREE_VAR (regstart);						\
+    FREE_VAR (regend);							\
+    FREE_VAR (old_regstart);						\
+    FREE_VAR (old_regend);						\
+    FREE_VAR (best_regstart);						\
+    FREE_VAR (best_regend);						\
+    FREE_VAR (reg_info);						\
+    FREE_VAR (reg_dummy);						\
+    FREE_VAR (reg_info_dummy);						\
+  } while (0)
+#else
+# define FREE_VARIABLES() ((void)0) /* Do nothing!  But inhibit gcc warning. */
+#endif /* not MATCH_MAY_ALLOCATE */
+
+/* These values must meet several constraints.  They must not be valid
+   register values; since we have a limit of 255 registers (because
+   we use only one byte in the pattern for the register number), we can
+   use numbers larger than 255.  They must differ by 1, because of
+   NUM_FAILURE_ITEMS above.  And the value for the lowest register must
+   be larger than the value for the highest register, so we do not try
+   to actually save any registers when none are active.  */
+#define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH)
+#define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1)
+
+/* Matching routines.  */
+
+#ifndef emacs   /* Emacs never uses this.  */
+/* re_match is like re_match_2 except it takes only a single string.  */
+
+int
+re_match (bufp, string, size, pos, regs)
+     struct re_pattern_buffer *bufp;
+     const char *string;
+     int size, pos;
+     struct re_registers *regs;
+{
+  int result = re_match_2_internal (bufp, NULL, 0, string, size,
+				    pos, regs, size);
+# ifndef REGEX_MALLOC
+#  ifdef C_ALLOCA
+  alloca (0);
+#  endif
+# endif
+  return result;
+}
+# ifdef _LIBC
+weak_alias (__re_match, re_match)
+# endif
+#endif /* not emacs */
+
+static boolean group_match_null_string_p _RE_ARGS ((unsigned char **p,
+						    unsigned char *end,
+						register_info_type *reg_info));
+static boolean alt_match_null_string_p _RE_ARGS ((unsigned char *p,
+						  unsigned char *end,
+						register_info_type *reg_info));
+static boolean common_op_match_null_string_p _RE_ARGS ((unsigned char **p,
+							unsigned char *end,
+						register_info_type *reg_info));
+static int bcmp_translate _RE_ARGS ((const char *s1, const char *s2,
+				     int len, char *translate));
+
+/* re_match_2 matches the compiled pattern in BUFP against the
+   the (virtual) concatenation of STRING1 and STRING2 (of length SIZE1
+   and SIZE2, respectively).  We start matching at POS, and stop
+   matching at STOP.
+
+   If REGS is non-null and the `no_sub' field of BUFP is nonzero, we
+   store offsets for the substring each group matched in REGS.  See the
+   documentation for exactly how many groups we fill.
+
+   We return -1 if no match, -2 if an internal error (such as the
+   failure stack overflowing).  Otherwise, we return the length of the
+   matched substring.  */
+
+int
+re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
+     struct re_pattern_buffer *bufp;
+     const char *string1, *string2;
+     int size1, size2;
+     int pos;
+     struct re_registers *regs;
+     int stop;
+{
+  int result = re_match_2_internal (bufp, string1, size1, string2, size2,
+				    pos, regs, stop);
+#ifndef REGEX_MALLOC
+# ifdef C_ALLOCA
+  alloca (0);
+# endif
+#endif
+  return result;
+}
+#ifdef _LIBC
+weak_alias (__re_match_2, re_match_2)
+#endif
+
+/* This is a separate function so that we can force an alloca cleanup
+   afterwards.  */
+static int
+re_match_2_internal (bufp, string1, size1, string2, size2, pos, regs, stop)
+     struct re_pattern_buffer *bufp;
+     const char *string1, *string2;
+     int size1, size2;
+     int pos;
+     struct re_registers *regs;
+     int stop;
+{
+  /* General temporaries.  */
+  int mcnt;
+  unsigned char *p1;
+
+  /* Just past the end of the corresponding string.  */
+  const char *end1, *end2;
+
+  /* Pointers into string1 and string2, just past the last characters in
+     each to consider matching.  */
+  const char *end_match_1, *end_match_2;
+
+  /* Where we are in the data, and the end of the current string.  */
+  const char *d, *dend;
+
+  /* Where we are in the pattern, and the end of the pattern.  */
+  unsigned char *p = bufp->buffer;
+  register unsigned char *pend = p + bufp->used;
+
+  /* Mark the opcode just after a start_memory, so we can test for an
+     empty subpattern when we get to the stop_memory.  */
+  unsigned char *just_past_start_mem = 0;
+
+  /* We use this to map every character in the string.  */
+  RE_TRANSLATE_TYPE translate = bufp->translate;
+
+  /* Failure point stack.  Each place that can handle a failure further
+     down the line pushes a failure point on this stack.  It consists of
+     restart, regend, and reg_info for all registers corresponding to
+     the subexpressions we're currently inside, plus the number of such
+     registers, and, finally, two char *'s.  The first char * is where
+     to resume scanning the pattern; the second one is where to resume
+     scanning the strings.  If the latter is zero, the failure point is
+     a ``dummy''; if a failure happens and the failure point is a dummy,
+     it gets discarded and the next next one is tried.  */
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global.  */
+  fail_stack_type fail_stack;
+#endif
+#ifdef DEBUG
+  static unsigned failure_id = 0;
+  unsigned nfailure_points_pushed = 0, nfailure_points_popped = 0;
+#endif
+
+#ifdef REL_ALLOC
+  /* This holds the pointer to the failure stack, when
+     it is allocated relocatably.  */
+  fail_stack_elt_t *failure_stack_ptr;
+#endif
+
+  /* We fill all the registers internally, independent of what we
+     return, for use in backreferences.  The number here includes
+     an element for register zero.  */
+  size_t num_regs = bufp->re_nsub + 1;
+
+  /* The currently active registers.  */
+  active_reg_t lowest_active_reg = NO_LOWEST_ACTIVE_REG;
+  active_reg_t highest_active_reg = NO_HIGHEST_ACTIVE_REG;
+
+  /* Information on the contents of registers. These are pointers into
+     the input strings; they record just what was matched (on this
+     attempt) by a subexpression part of the pattern, that is, the
+     regnum-th regstart pointer points to where in the pattern we began
+     matching and the regnum-th regend points to right after where we
+     stopped matching the regnum-th subexpression.  (The zeroth register
+     keeps track of what the whole pattern matches.)  */
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
+  const char **regstart, **regend;
+#endif
+
+  /* If a group that's operated upon by a repetition operator fails to
+     match anything, then the register for its start will need to be
+     restored because it will have been set to wherever in the string we
+     are when we last see its open-group operator.  Similarly for a
+     register's end.  */
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
+  const char **old_regstart, **old_regend;
+#endif
+
+  /* The is_active field of reg_info helps us keep track of which (possibly
+     nested) subexpressions we are currently in. The matched_something
+     field of reg_info[reg_num] helps us tell whether or not we have
+     matched any of the pattern so far this time through the reg_num-th
+     subexpression.  These two fields get reset each time through any
+     loop their register is in.  */
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global.  */
+  register_info_type *reg_info;
+#endif
+
+  /* The following record the register info as found in the above
+     variables when we find a match better than any we've seen before.
+     This happens as we backtrack through the failure points, which in
+     turn happens only if we have not yet matched the entire string. */
+  unsigned best_regs_set = false;
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
+  const char **best_regstart, **best_regend;
+#endif
+
+  /* Logically, this is `best_regend[0]'.  But we don't want to have to
+     allocate space for that if we're not allocating space for anything
+     else (see below).  Also, we never need info about register 0 for
+     any of the other register vectors, and it seems rather a kludge to
+     treat `best_regend' differently than the rest.  So we keep track of
+     the end of the best match so far in a separate variable.  We
+     initialize this to NULL so that when we backtrack the first time
+     and need to test it, it's not garbage.  */
+  const char *match_end = NULL;
+
+  /* This helps SET_REGS_MATCHED avoid doing redundant work.  */
+  int set_regs_matched_done = 0;
+
+  /* Used when we pop values we don't care about.  */
+#ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global.  */
+  const char **reg_dummy;
+  register_info_type *reg_info_dummy;
+#endif
+
+#ifdef DEBUG
+  /* Counts the total number of registers pushed.  */
+  unsigned num_regs_pushed = 0;
+#endif
+
+  DEBUG_PRINT1 ("\n\nEntering re_match_2.\n");
+
+  INIT_FAIL_STACK ();
+
+#ifdef MATCH_MAY_ALLOCATE
+  /* Do not bother to initialize all the register variables if there are
+     no groups in the pattern, as it takes a fair amount of time.  If
+     there are groups, we include space for register 0 (the whole
+     pattern), even though we never use it, since it simplifies the
+     array indexing.  We should fix this.  */
+  if (bufp->re_nsub)
+    {
+      regstart = REGEX_TALLOC (num_regs, const char *);
+      regend = REGEX_TALLOC (num_regs, const char *);
+      old_regstart = REGEX_TALLOC (num_regs, const char *);
+      old_regend = REGEX_TALLOC (num_regs, const char *);
+      best_regstart = REGEX_TALLOC (num_regs, const char *);
+      best_regend = REGEX_TALLOC (num_regs, const char *);
+      reg_info = REGEX_TALLOC (num_regs, register_info_type);
+      reg_dummy = REGEX_TALLOC (num_regs, const char *);
+      reg_info_dummy = REGEX_TALLOC (num_regs, register_info_type);
+
+      if (!(regstart && regend && old_regstart && old_regend && reg_info
+            && best_regstart && best_regend && reg_dummy && reg_info_dummy))
+        {
+          FREE_VARIABLES ();
+          return -2;
+        }
+    }
+  else
+    {
+      /* We must initialize all our variables to NULL, so that
+         `FREE_VARIABLES' doesn't try to free them.  */
+      regstart = regend = old_regstart = old_regend = best_regstart
+        = best_regend = reg_dummy = NULL;
+      reg_info = reg_info_dummy = (register_info_type *) NULL;
+    }
+#endif /* MATCH_MAY_ALLOCATE */
+
+  /* The starting position is bogus.  */
+  if (pos < 0 || pos > size1 + size2)
+    {
+      FREE_VARIABLES ();
+      return -1;
+    }
+
+  /* Initialize subexpression text positions to -1 to mark ones that no
+     start_memory/stop_memory has been seen for. Also initialize the
+     register information struct.  */
+  for (mcnt = 1; (unsigned) mcnt < num_regs; mcnt++)
+    {
+      regstart[mcnt] = regend[mcnt]
+        = old_regstart[mcnt] = old_regend[mcnt] = REG_UNSET_VALUE;
+
+      REG_MATCH_NULL_STRING_P (reg_info[mcnt]) = MATCH_NULL_UNSET_VALUE;
+      IS_ACTIVE (reg_info[mcnt]) = 0;
+      MATCHED_SOMETHING (reg_info[mcnt]) = 0;
+      EVER_MATCHED_SOMETHING (reg_info[mcnt]) = 0;
+    }
+
+  /* We move `string1' into `string2' if the latter's empty -- but not if
+     `string1' is null.  */
+  if (size2 == 0 && string1 != NULL)
+    {
+      string2 = string1;
+      size2 = size1;
+      string1 = 0;
+      size1 = 0;
+    }
+  end1 = string1 + size1;
+  end2 = string2 + size2;
+
+  /* Compute where to stop matching, within the two strings.  */
+  if (stop <= size1)
+    {
+      end_match_1 = string1 + stop;
+      end_match_2 = string2;
+    }
+  else
+    {
+      end_match_1 = end1;
+      end_match_2 = string2 + stop - size1;
+    }
+
+  /* `p' scans through the pattern as `d' scans through the data.
+     `dend' is the end of the input string that `d' points within.  `d'
+     is advanced into the following input string whenever necessary, but
+     this happens before fetching; therefore, at the beginning of the
+     loop, `d' can be pointing at the end of a string, but it cannot
+     equal `string2'.  */
+  if (size1 > 0 && pos <= size1)
+    {
+      d = string1 + pos;
+      dend = end_match_1;
+    }
+  else
+    {
+      d = string2 + pos - size1;
+      dend = end_match_2;
+    }
+
+  DEBUG_PRINT1 ("The compiled pattern is:\n");
+  DEBUG_PRINT_COMPILED_PATTERN (bufp, p, pend);
+  DEBUG_PRINT1 ("The string to match is: `");
+  DEBUG_PRINT_DOUBLE_STRING (d, string1, size1, string2, size2);
+  DEBUG_PRINT1 ("'\n");
+
+  /* This loops over pattern commands.  It exits by returning from the
+     function if the match is complete, or it drops through if the match
+     fails at this starting point in the input data.  */
+  for (;;)
+    {
+#ifdef _LIBC
+      DEBUG_PRINT2 ("\n%p: ", p);
+#else
+      DEBUG_PRINT2 ("\n0x%x: ", p);
+#endif
+
+      if (p == pend)
+	{ /* End of pattern means we might have succeeded.  */
+          DEBUG_PRINT1 ("end of pattern ... ");
+
+	  /* If we haven't matched the entire string, and we want the
+             longest match, try backtracking.  */
+          if (d != end_match_2)
+	    {
+	      /* 1 if this match ends in the same string (string1 or string2)
+		 as the best previous match.  */
+	      boolean same_str_p = (FIRST_STRING_P (match_end)
+				    == MATCHING_IN_FIRST_STRING);
+	      /* 1 if this match is the best seen so far.  */
+	      boolean best_match_p;
+
+	      /* AIX compiler got confused when this was combined
+		 with the previous declaration.  */
+	      if (same_str_p)
+		best_match_p = d > match_end;
+	      else
+		best_match_p = !MATCHING_IN_FIRST_STRING;
+
+              DEBUG_PRINT1 ("backtracking.\n");
+
+              if (!FAIL_STACK_EMPTY ())
+                { /* More failure points to try.  */
+
+                  /* If exceeds best match so far, save it.  */
+                  if (!best_regs_set || best_match_p)
+                    {
+                      best_regs_set = true;
+                      match_end = d;
+
+                      DEBUG_PRINT1 ("\nSAVING match as best so far.\n");
+
+                      for (mcnt = 1; (unsigned) mcnt < num_regs; mcnt++)
+                        {
+                          best_regstart[mcnt] = regstart[mcnt];
+                          best_regend[mcnt] = regend[mcnt];
+                        }
+                    }
+                  goto fail;
+                }
+
+              /* If no failure points, don't restore garbage.  And if
+                 last match is real best match, don't restore second
+                 best one. */
+              else if (best_regs_set && !best_match_p)
+                {
+  	        restore_best_regs:
+                  /* Restore best match.  It may happen that `dend ==
+                     end_match_1' while the restored d is in string2.
+                     For example, the pattern `x.*y.*z' against the
+                     strings `x-' and `y-z-', if the two strings are
+                     not consecutive in memory.  */
+                  DEBUG_PRINT1 ("Restoring best registers.\n");
+
+                  d = match_end;
+                  dend = ((d >= string1 && d <= end1)
+		           ? end_match_1 : end_match_2);
+
+		  for (mcnt = 1; (unsigned) mcnt < num_regs; mcnt++)
+		    {
+		      regstart[mcnt] = best_regstart[mcnt];
+		      regend[mcnt] = best_regend[mcnt];
+		    }
+                }
+            } /* d != end_match_2 */
+
+	succeed_label:
+          DEBUG_PRINT1 ("Accepting match.\n");
+
+          /* If caller wants register contents data back, do it.  */
+          if (regs && !bufp->no_sub)
+	    {
+              /* Have the register data arrays been allocated?  */
+              if (bufp->regs_allocated == REGS_UNALLOCATED)
+                { /* No.  So allocate them with malloc.  We need one
+                     extra element beyond `num_regs' for the `-1' marker
+                     GNU code uses.  */
+                  regs->num_regs = MAX (RE_NREGS, num_regs + 1);
+                  regs->start = TALLOC (regs->num_regs, regoff_t);
+                  regs->end = TALLOC (regs->num_regs, regoff_t);
+                  if (regs->start == NULL || regs->end == NULL)
+		    {
+		      FREE_VARIABLES ();
+		      return -2;
+		    }
+                  bufp->regs_allocated = REGS_REALLOCATE;
+                }
+              else if (bufp->regs_allocated == REGS_REALLOCATE)
+                { /* Yes.  If we need more elements than were already
+                     allocated, reallocate them.  If we need fewer, just
+                     leave it alone.  */
+                  if (regs->num_regs < num_regs + 1)
+                    {
+                      regs->num_regs = num_regs + 1;
+                      RETALLOC (regs->start, regs->num_regs, regoff_t);
+                      RETALLOC (regs->end, regs->num_regs, regoff_t);
+                      if (regs->start == NULL || regs->end == NULL)
+			{
+			  FREE_VARIABLES ();
+			  return -2;
+			}
+                    }
+                }
+              else
+		{
+		  /* These braces fend off a "empty body in an else-statement"
+		     warning under GCC when assert expands to nothing.  */
+		  assert (bufp->regs_allocated == REGS_FIXED);
+		}
+
+              /* Convert the pointer data in `regstart' and `regend' to
+                 indices.  Register zero has to be set differently,
+                 since we haven't kept track of any info for it.  */
+              if (regs->num_regs > 0)
+                {
+                  regs->start[0] = pos;
+                  regs->end[0] = (MATCHING_IN_FIRST_STRING
+				  ? ((regoff_t) (d - string1))
+			          : ((regoff_t) (d - string2 + size1)));
+                }
+
+              /* Go through the first `min (num_regs, regs->num_regs)'
+                 registers, since that is all we initialized.  */
+	      for (mcnt = 1; (unsigned) mcnt < MIN (num_regs, regs->num_regs);
+		   mcnt++)
+		{
+                  if (REG_UNSET (regstart[mcnt]) || REG_UNSET (regend[mcnt]))
+                    regs->start[mcnt] = regs->end[mcnt] = -1;
+                  else
+                    {
+		      regs->start[mcnt]
+			= (regoff_t) POINTER_TO_OFFSET (regstart[mcnt]);
+                      regs->end[mcnt]
+			= (regoff_t) POINTER_TO_OFFSET (regend[mcnt]);
+                    }
+		}
+
+              /* If the regs structure we return has more elements than
+                 were in the pattern, set the extra elements to -1.  If
+                 we (re)allocated the registers, this is the case,
+                 because we always allocate enough to have at least one
+                 -1 at the end.  */
+              for (mcnt = num_regs; (unsigned) mcnt < regs->num_regs; mcnt++)
+                regs->start[mcnt] = regs->end[mcnt] = -1;
+	    } /* regs && !bufp->no_sub */
+
+          DEBUG_PRINT4 ("%u failure points pushed, %u popped (%u remain).\n",
+                        nfailure_points_pushed, nfailure_points_popped,
+                        nfailure_points_pushed - nfailure_points_popped);
+          DEBUG_PRINT2 ("%u registers pushed.\n", num_regs_pushed);
+
+          mcnt = d - pos - (MATCHING_IN_FIRST_STRING
+			    ? string1
+			    : string2 - size1);
+
+          DEBUG_PRINT2 ("Returning %d from re_match_2.\n", mcnt);
+
+          FREE_VARIABLES ();
+          return mcnt;
+        }
+
+      /* Otherwise match next pattern command.  */
+      switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
+	{
+        /* Ignore these.  Used to ignore the n of succeed_n's which
+           currently have n == 0.  */
+        case no_op:
+          DEBUG_PRINT1 ("EXECUTING no_op.\n");
+          break;
+
+	case succeed:
+          DEBUG_PRINT1 ("EXECUTING succeed.\n");
+	  goto succeed_label;
+
+        /* Match the next n pattern characters exactly.  The following
+           byte in the pattern defines n, and the n bytes after that
+           are the characters to match.  */
+	case exactn:
+	  mcnt = *p++;
+          DEBUG_PRINT2 ("EXECUTING exactn %d.\n", mcnt);
+
+          /* This is written out as an if-else so we don't waste time
+             testing `translate' inside the loop.  */
+          if (translate)
+	    {
+	      do
+		{
+		  PREFETCH ();
+		  if ((unsigned char) translate[(unsigned char) *d++]
+		      != (unsigned char) *p++)
+                    goto fail;
+		}
+	      while (--mcnt);
+	    }
+	  else
+	    {
+	      do
+		{
+		  PREFETCH ();
+		  if (*d++ != (char) *p++) goto fail;
+		}
+	      while (--mcnt);
+	    }
+	  SET_REGS_MATCHED ();
+          break;
+
+
+        /* Match any character except possibly a newline or a null.  */
+	case anychar:
+          DEBUG_PRINT1 ("EXECUTING anychar.\n");
+
+          PREFETCH ();
+
+          if ((!(bufp->syntax & RE_DOT_NEWLINE) && TRANSLATE (*d) == '\n')
+              || (bufp->syntax & RE_DOT_NOT_NULL && TRANSLATE (*d) == '\000'))
+	    goto fail;
+
+          SET_REGS_MATCHED ();
+          DEBUG_PRINT2 ("  Matched `%d'.\n", *d);
+          d++;
+	  break;
+
+
+	case charset:
+	case charset_not:
+	  {
+	    register unsigned char c;
+	    boolean not = (re_opcode_t) *(p - 1) == charset_not;
+
+            DEBUG_PRINT2 ("EXECUTING charset%s.\n", not ? "_not" : "");
+
+	    PREFETCH ();
+	    c = TRANSLATE (*d); /* The character to match.  */
+
+            /* Cast to `unsigned' instead of `unsigned char' in case the
+               bit list is a full 32 bytes long.  */
+	    if (c < (unsigned) (*p * BYTEWIDTH)
+		&& p[1 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
+	      not = !not;
+
+	    p += 1 + *p;
+
+	    if (!not) goto fail;
+
+	    SET_REGS_MATCHED ();
+            d++;
+	    break;
+	  }
+
+
+        /* The beginning of a group is represented by start_memory.
+           The arguments are the register number in the next byte, and the
+           number of groups inner to this one in the next.  The text
+           matched within the group is recorded (in the internal
+           registers data structure) under the register number.  */
+        case start_memory:
+	  DEBUG_PRINT3 ("EXECUTING start_memory %d (%d):\n", *p, p[1]);
+
+          /* Find out if this group can match the empty string.  */
+	  p1 = p;		/* To send to group_match_null_string_p.  */
+
+          if (REG_MATCH_NULL_STRING_P (reg_info[*p]) == MATCH_NULL_UNSET_VALUE)
+            REG_MATCH_NULL_STRING_P (reg_info[*p])
+              = group_match_null_string_p (&p1, pend, reg_info);
+
+          /* Save the position in the string where we were the last time
+             we were at this open-group operator in case the group is
+             operated upon by a repetition operator, e.g., with `(a*)*b'
+             against `ab'; then we want to ignore where we are now in
+             the string in case this attempt to match fails.  */
+          old_regstart[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
+                             ? REG_UNSET (regstart[*p]) ? d : regstart[*p]
+                             : regstart[*p];
+	  DEBUG_PRINT2 ("  old_regstart: %d\n",
+			 POINTER_TO_OFFSET (old_regstart[*p]));
+
+          regstart[*p] = d;
+	  DEBUG_PRINT2 ("  regstart: %d\n", POINTER_TO_OFFSET (regstart[*p]));
+
+          IS_ACTIVE (reg_info[*p]) = 1;
+          MATCHED_SOMETHING (reg_info[*p]) = 0;
+
+	  /* Clear this whenever we change the register activity status.  */
+	  set_regs_matched_done = 0;
+
+          /* This is the new highest active register.  */
+          highest_active_reg = *p;
+
+          /* If nothing was active before, this is the new lowest active
+             register.  */
+          if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
+            lowest_active_reg = *p;
+
+          /* Move past the register number and inner group count.  */
+          p += 2;
+	  just_past_start_mem = p;
+
+          break;
+
+
+        /* The stop_memory opcode represents the end of a group.  Its
+           arguments are the same as start_memory's: the register
+           number, and the number of inner groups.  */
+	case stop_memory:
+	  DEBUG_PRINT3 ("EXECUTING stop_memory %d (%d):\n", *p, p[1]);
+
+          /* We need to save the string position the last time we were at
+             this close-group operator in case the group is operated
+             upon by a repetition operator, e.g., with `((a*)*(b*)*)*'
+             against `aba'; then we want to ignore where we are now in
+             the string in case this attempt to match fails.  */
+          old_regend[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
+                           ? REG_UNSET (regend[*p]) ? d : regend[*p]
+			   : regend[*p];
+	  DEBUG_PRINT2 ("      old_regend: %d\n",
+			 POINTER_TO_OFFSET (old_regend[*p]));
+
+          regend[*p] = d;
+	  DEBUG_PRINT2 ("      regend: %d\n", POINTER_TO_OFFSET (regend[*p]));
+
+          /* This register isn't active anymore.  */
+          IS_ACTIVE (reg_info[*p]) = 0;
+
+	  /* Clear this whenever we change the register activity status.  */
+	  set_regs_matched_done = 0;
+
+          /* If this was the only register active, nothing is active
+             anymore.  */
+          if (lowest_active_reg == highest_active_reg)
+            {
+              lowest_active_reg = NO_LOWEST_ACTIVE_REG;
+              highest_active_reg = NO_HIGHEST_ACTIVE_REG;
+            }
+          else
+            { /* We must scan for the new highest active register, since
+                 it isn't necessarily one less than now: consider
+                 (a(b)c(d(e)f)g).  When group 3 ends, after the f), the
+                 new highest active register is 1.  */
+              unsigned char r = *p - 1;
+              while (r > 0 && !IS_ACTIVE (reg_info[r]))
+                r--;
+
+              /* If we end up at register zero, that means that we saved
+                 the registers as the result of an `on_failure_jump', not
+                 a `start_memory', and we jumped to past the innermost
+                 `stop_memory'.  For example, in ((.)*) we save
+                 registers 1 and 2 as a result of the *, but when we pop
+                 back to the second ), we are at the stop_memory 1.
+                 Thus, nothing is active.  */
+	      if (r == 0)
+                {
+                  lowest_active_reg = NO_LOWEST_ACTIVE_REG;
+                  highest_active_reg = NO_HIGHEST_ACTIVE_REG;
+                }
+              else
+                highest_active_reg = r;
+            }
+
+          /* If just failed to match something this time around with a
+             group that's operated on by a repetition operator, try to
+             force exit from the ``loop'', and restore the register
+             information for this group that we had before trying this
+             last match.  */
+          if ((!MATCHED_SOMETHING (reg_info[*p])
+               || just_past_start_mem == p - 1)
+	      && (p + 2) < pend)
+            {
+              boolean is_a_jump_n = false;
+
+              p1 = p + 2;
+              mcnt = 0;
+              switch ((re_opcode_t) *p1++)
+                {
+                  case jump_n:
+		    is_a_jump_n = true;
+                  case pop_failure_jump:
+		  case maybe_pop_jump:
+		  case jump:
+		  case dummy_failure_jump:
+                    EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+		    if (is_a_jump_n)
+		      p1 += 2;
+                    break;
+
+                  default:
+                    /* do nothing */ ;
+                }
+	      p1 += mcnt;
+
+              /* If the next operation is a jump backwards in the pattern
+	         to an on_failure_jump right before the start_memory
+                 corresponding to this stop_memory, exit from the loop
+                 by forcing a failure after pushing on the stack the
+                 on_failure_jump's jump in the pattern, and d.  */
+              if (mcnt < 0 && (re_opcode_t) *p1 == on_failure_jump
+                  && (re_opcode_t) p1[3] == start_memory && p1[4] == *p)
+		{
+                  /* If this group ever matched anything, then restore
+                     what its registers were before trying this last
+                     failed match, e.g., with `(a*)*b' against `ab' for
+                     regstart[1], and, e.g., with `((a*)*(b*)*)*'
+                     against `aba' for regend[3].
+
+                     Also restore the registers for inner groups for,
+                     e.g., `((a*)(b*))*' against `aba' (register 3 would
+                     otherwise get trashed).  */
+
+                  if (EVER_MATCHED_SOMETHING (reg_info[*p]))
+		    {
+		      unsigned r;
+
+                      EVER_MATCHED_SOMETHING (reg_info[*p]) = 0;
+
+		      /* Restore this and inner groups' (if any) registers.  */
+                      for (r = *p; r < (unsigned) *p + (unsigned) *(p + 1);
+			   r++)
+                        {
+                          regstart[r] = old_regstart[r];
+
+                          /* xx why this test?  */
+                          if (old_regend[r] >= regstart[r])
+                            regend[r] = old_regend[r];
+                        }
+                    }
+		  p1++;
+                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+                  PUSH_FAILURE_POINT (p1 + mcnt, d, -2);
+
+                  goto fail;
+                }
+            }
+
+          /* Move past the register number and the inner group count.  */
+          p += 2;
+          break;
+
+
+	/* \<digit> has been turned into a `duplicate' command which is
+           followed by the numeric value of <digit> as the register number.  */
+        case duplicate:
+	  {
+	    register const char *d2, *dend2;
+	    int regno = *p++;   /* Get which register to match against.  */
+	    DEBUG_PRINT2 ("EXECUTING duplicate %d.\n", regno);
+
+	    /* Can't back reference a group which we've never matched.  */
+            if (REG_UNSET (regstart[regno]) || REG_UNSET (regend[regno]))
+              goto fail;
+
+            /* Where in input to try to start matching.  */
+            d2 = regstart[regno];
+
+            /* Where to stop matching; if both the place to start and
+               the place to stop matching are in the same string, then
+               set to the place to stop, otherwise, for now have to use
+               the end of the first string.  */
+
+            dend2 = ((FIRST_STRING_P (regstart[regno])
+		      == FIRST_STRING_P (regend[regno]))
+		     ? regend[regno] : end_match_1);
+	    for (;;)
+	      {
+		/* If necessary, advance to next segment in register
+                   contents.  */
+		while (d2 == dend2)
+		  {
+		    if (dend2 == end_match_2) break;
+		    if (dend2 == regend[regno]) break;
+
+                    /* End of string1 => advance to string2. */
+                    d2 = string2;
+                    dend2 = regend[regno];
+		  }
+		/* At end of register contents => success */
+		if (d2 == dend2) break;
+
+		/* If necessary, advance to next segment in data.  */
+		PREFETCH ();
+
+		/* How many characters left in this segment to match.  */
+		mcnt = dend - d;
+
+		/* Want how many consecutive characters we can match in
+                   one shot, so, if necessary, adjust the count.  */
+                if (mcnt > dend2 - d2)
+		  mcnt = dend2 - d2;
+
+		/* Compare that many; failure if mismatch, else move
+                   past them.  */
+		if (translate
+                    ? bcmp_translate (d, d2, mcnt, translate)
+                    : memcmp (d, d2, mcnt))
+		  goto fail;
+		d += mcnt, d2 += mcnt;
+
+		/* Do this because we've match some characters.  */
+		SET_REGS_MATCHED ();
+	      }
+	  }
+	  break;
+
+
+        /* begline matches the empty string at the beginning of the string
+           (unless `not_bol' is set in `bufp'), and, if
+           `newline_anchor' is set, after newlines.  */
+	case begline:
+          DEBUG_PRINT1 ("EXECUTING begline.\n");
+
+          if (AT_STRINGS_BEG (d))
+            {
+              if (!bufp->not_bol) break;
+            }
+          else if (d[-1] == '\n' && bufp->newline_anchor)
+            {
+              break;
+            }
+          /* In all other cases, we fail.  */
+          goto fail;
+
+
+        /* endline is the dual of begline.  */
+	case endline:
+          DEBUG_PRINT1 ("EXECUTING endline.\n");
+
+          if (AT_STRINGS_END (d))
+            {
+              if (!bufp->not_eol) break;
+            }
+
+          /* We have to ``prefetch'' the next character.  */
+          else if ((d == end1 ? *string2 : *d) == '\n'
+                   && bufp->newline_anchor)
+            {
+              break;
+            }
+          goto fail;
+
+
+	/* Match at the very beginning of the data.  */
+        case begbuf:
+          DEBUG_PRINT1 ("EXECUTING begbuf.\n");
+          if (AT_STRINGS_BEG (d))
+            break;
+          goto fail;
+
+
+	/* Match at the very end of the data.  */
+        case endbuf:
+          DEBUG_PRINT1 ("EXECUTING endbuf.\n");
+	  if (AT_STRINGS_END (d))
+	    break;
+          goto fail;
+
+
+        /* on_failure_keep_string_jump is used to optimize `.*\n'.  It
+           pushes NULL as the value for the string on the stack.  Then
+           `pop_failure_point' will keep the current value for the
+           string, instead of restoring it.  To see why, consider
+           matching `foo\nbar' against `.*\n'.  The .* matches the foo;
+           then the . fails against the \n.  But the next thing we want
+           to do is match the \n against the \n; if we restored the
+           string value, we would be back at the foo.
+
+           Because this is used only in specific cases, we don't need to
+           check all the things that `on_failure_jump' does, to make
+           sure the right things get saved on the stack.  Hence we don't
+           share its code.  The only reason to push anything on the
+           stack at all is that otherwise we would have to change
+           `anychar's code to do something besides goto fail in this
+           case; that seems worse than this.  */
+        case on_failure_keep_string_jump:
+          DEBUG_PRINT1 ("EXECUTING on_failure_keep_string_jump");
+
+          EXTRACT_NUMBER_AND_INCR (mcnt, p);
+#ifdef _LIBC
+          DEBUG_PRINT3 (" %d (to %p):\n", mcnt, p + mcnt);
+#else
+          DEBUG_PRINT3 (" %d (to 0x%x):\n", mcnt, p + mcnt);
+#endif
+
+          PUSH_FAILURE_POINT (p + mcnt, NULL, -2);
+          break;
+
+
+	/* Uses of on_failure_jump:
+
+           Each alternative starts with an on_failure_jump that points
+           to the beginning of the next alternative.  Each alternative
+           except the last ends with a jump that in effect jumps past
+           the rest of the alternatives.  (They really jump to the
+           ending jump of the following alternative, because tensioning
+           these jumps is a hassle.)
+
+           Repeats start with an on_failure_jump that points past both
+           the repetition text and either the following jump or
+           pop_failure_jump back to this on_failure_jump.  */
+	case on_failure_jump:
+        on_failure:
+          DEBUG_PRINT1 ("EXECUTING on_failure_jump");
+
+          EXTRACT_NUMBER_AND_INCR (mcnt, p);
+#ifdef _LIBC
+          DEBUG_PRINT3 (" %d (to %p)", mcnt, p + mcnt);
+#else
+          DEBUG_PRINT3 (" %d (to 0x%x)", mcnt, p + mcnt);
+#endif
+
+          /* If this on_failure_jump comes right before a group (i.e.,
+             the original * applied to a group), save the information
+             for that group and all inner ones, so that if we fail back
+             to this point, the group's information will be correct.
+             For example, in \(a*\)*\1, we need the preceding group,
+             and in \(zz\(a*\)b*\)\2, we need the inner group.  */
+
+          /* We can't use `p' to check ahead because we push
+             a failure point to `p + mcnt' after we do this.  */
+          p1 = p;
+
+          /* We need to skip no_op's before we look for the
+             start_memory in case this on_failure_jump is happening as
+             the result of a completed succeed_n, as in \(a\)\{1,3\}b\1
+             against aba.  */
+          while (p1 < pend && (re_opcode_t) *p1 == no_op)
+            p1++;
+
+          if (p1 < pend && (re_opcode_t) *p1 == start_memory)
+            {
+              /* We have a new highest active register now.  This will
+                 get reset at the start_memory we are about to get to,
+                 but we will have saved all the registers relevant to
+                 this repetition op, as described above.  */
+              highest_active_reg = *(p1 + 1) + *(p1 + 2);
+              if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
+                lowest_active_reg = *(p1 + 1);
+            }
+
+          DEBUG_PRINT1 (":\n");
+          PUSH_FAILURE_POINT (p + mcnt, d, -2);
+          break;
+
+
+        /* A smart repeat ends with `maybe_pop_jump'.
+	   We change it to either `pop_failure_jump' or `jump'.  */
+        case maybe_pop_jump:
+          EXTRACT_NUMBER_AND_INCR (mcnt, p);
+          DEBUG_PRINT2 ("EXECUTING maybe_pop_jump %d.\n", mcnt);
+          {
+	    register unsigned char *p2 = p;
+
+            /* Compare the beginning of the repeat with what in the
+               pattern follows its end. If we can establish that there
+               is nothing that they would both match, i.e., that we
+               would have to backtrack because of (as in, e.g., `a*a')
+               then we can change to pop_failure_jump, because we'll
+               never have to backtrack.
+
+               This is not true in the case of alternatives: in
+               `(a|ab)*' we do need to backtrack to the `ab' alternative
+               (e.g., if the string was `ab').  But instead of trying to
+               detect that here, the alternative has put on a dummy
+               failure point which is what we will end up popping.  */
+
+	    /* Skip over open/close-group commands.
+	       If what follows this loop is a ...+ construct,
+	       look at what begins its body, since we will have to
+	       match at least one of that.  */
+	    while (1)
+	      {
+		if (p2 + 2 < pend
+		    && ((re_opcode_t) *p2 == stop_memory
+			|| (re_opcode_t) *p2 == start_memory))
+		  p2 += 3;
+		else if (p2 + 6 < pend
+			 && (re_opcode_t) *p2 == dummy_failure_jump)
+		  p2 += 6;
+		else
+		  break;
+	      }
+
+	    p1 = p + mcnt;
+	    /* p1[0] ... p1[2] are the `on_failure_jump' corresponding
+	       to the `maybe_finalize_jump' of this case.  Examine what
+	       follows.  */
+
+            /* If we're at the end of the pattern, we can change.  */
+            if (p2 == pend)
+	      {
+		/* Consider what happens when matching ":\(.*\)"
+		   against ":/".  I don't really understand this code
+		   yet.  */
+  	        p[-3] = (unsigned char) pop_failure_jump;
+                DEBUG_PRINT1
+                  ("  End of pattern: change to `pop_failure_jump'.\n");
+              }
+
+            else if ((re_opcode_t) *p2 == exactn
+		     || (bufp->newline_anchor && (re_opcode_t) *p2 == endline))
+	      {
+		register unsigned char c
+                  = *p2 == (unsigned char) endline ? '\n' : p2[2];
+
+                if ((re_opcode_t) p1[3] == exactn && p1[5] != c)
+                  {
+  		    p[-3] = (unsigned char) pop_failure_jump;
+                    DEBUG_PRINT3 ("  %c != %c => pop_failure_jump.\n",
+                                  c, p1[5]);
+                  }
+
+		else if ((re_opcode_t) p1[3] == charset
+			 || (re_opcode_t) p1[3] == charset_not)
+		  {
+		    int not = (re_opcode_t) p1[3] == charset_not;
+
+		    if (c < (unsigned char) (p1[4] * BYTEWIDTH)
+			&& p1[5 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
+		      not = !not;
+
+                    /* `not' is equal to 1 if c would match, which means
+                        that we can't change to pop_failure_jump.  */
+		    if (!not)
+                      {
+  		        p[-3] = (unsigned char) pop_failure_jump;
+                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
+                      }
+		  }
+	      }
+            else if ((re_opcode_t) *p2 == charset)
+	      {
+#ifdef DEBUG
+		register unsigned char c
+                  = *p2 == (unsigned char) endline ? '\n' : p2[2];
+#endif
+
+#if 0
+                if ((re_opcode_t) p1[3] == exactn
+		    && ! ((int) p2[1] * BYTEWIDTH > (int) p1[5]
+			  && (p2[2 + p1[5] / BYTEWIDTH]
+			      & (1 << (p1[5] % BYTEWIDTH)))))
+#else
+                if ((re_opcode_t) p1[3] == exactn
+		    && ! ((int) p2[1] * BYTEWIDTH > (int) p1[4]
+			  && (p2[2 + p1[4] / BYTEWIDTH]
+			      & (1 << (p1[4] % BYTEWIDTH)))))
+#endif
+                  {
+  		    p[-3] = (unsigned char) pop_failure_jump;
+                    DEBUG_PRINT3 ("  %c != %c => pop_failure_jump.\n",
+                                  c, p1[5]);
+                  }
+
+		else if ((re_opcode_t) p1[3] == charset_not)
+		  {
+		    int idx;
+		    /* We win if the charset_not inside the loop
+		       lists every character listed in the charset after.  */
+		    for (idx = 0; idx < (int) p2[1]; idx++)
+		      if (! (p2[2 + idx] == 0
+			     || (idx < (int) p1[4]
+				 && ((p2[2 + idx] & ~ p1[5 + idx]) == 0))))
+			break;
+
+		    if (idx == p2[1])
+                      {
+  		        p[-3] = (unsigned char) pop_failure_jump;
+                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
+                      }
+		  }
+		else if ((re_opcode_t) p1[3] == charset)
+		  {
+		    int idx;
+		    /* We win if the charset inside the loop
+		       has no overlap with the one after the loop.  */
+		    for (idx = 0;
+			 idx < (int) p2[1] && idx < (int) p1[4];
+			 idx++)
+		      if ((p2[2 + idx] & p1[5 + idx]) != 0)
+			break;
+
+		    if (idx == p2[1] || idx == p1[4])
+                      {
+  		        p[-3] = (unsigned char) pop_failure_jump;
+                        DEBUG_PRINT1 ("  No match => pop_failure_jump.\n");
+                      }
+		  }
+	      }
+	  }
+	  p -= 2;		/* Point at relative address again.  */
+	  if ((re_opcode_t) p[-1] != pop_failure_jump)
+	    {
+	      p[-1] = (unsigned char) jump;
+              DEBUG_PRINT1 ("  Match => jump.\n");
+	      goto unconditional_jump;
+	    }
+        /* Note fall through.  */
+
+
+	/* The end of a simple repeat has a pop_failure_jump back to
+           its matching on_failure_jump, where the latter will push a
+           failure point.  The pop_failure_jump takes off failure
+           points put on by this pop_failure_jump's matching
+           on_failure_jump; we got through the pattern to here from the
+           matching on_failure_jump, so didn't fail.  */
+        case pop_failure_jump:
+          {
+            /* We need to pass separate storage for the lowest and
+               highest registers, even though we don't care about the
+               actual values.  Otherwise, we will restore only one
+               register from the stack, since lowest will == highest in
+               `pop_failure_point'.  */
+            active_reg_t dummy_low_reg, dummy_high_reg;
+            unsigned char *pdummy;
+            const char *sdummy;
+
+            DEBUG_PRINT1 ("EXECUTING pop_failure_jump.\n");
+            POP_FAILURE_POINT (sdummy, pdummy,
+                               dummy_low_reg, dummy_high_reg,
+                               reg_dummy, reg_dummy, reg_info_dummy);
+          }
+	  /* Note fall through.  */
+
+	unconditional_jump:
+#ifdef _LIBC
+	  DEBUG_PRINT2 ("\n%p: ", p);
+#else
+	  DEBUG_PRINT2 ("\n0x%x: ", p);
+#endif
+          /* Note fall through.  */
+
+        /* Unconditionally jump (without popping any failure points).  */
+        case jump:
+	  EXTRACT_NUMBER_AND_INCR (mcnt, p);	/* Get the amount to jump.  */
+          DEBUG_PRINT2 ("EXECUTING jump %d ", mcnt);
+	  p += mcnt;				/* Do the jump.  */
+#ifdef _LIBC
+          DEBUG_PRINT2 ("(to %p).\n", p);
+#else
+          DEBUG_PRINT2 ("(to 0x%x).\n", p);
+#endif
+	  break;
+
+
+        /* We need this opcode so we can detect where alternatives end
+           in `group_match_null_string_p' et al.  */
+        case jump_past_alt:
+          DEBUG_PRINT1 ("EXECUTING jump_past_alt.\n");
+          goto unconditional_jump;
+
+
+        /* Normally, the on_failure_jump pushes a failure point, which
+           then gets popped at pop_failure_jump.  We will end up at
+           pop_failure_jump, also, and with a pattern of, say, `a+', we
+           are skipping over the on_failure_jump, so we have to push
+           something meaningless for pop_failure_jump to pop.  */
+        case dummy_failure_jump:
+          DEBUG_PRINT1 ("EXECUTING dummy_failure_jump.\n");
+          /* It doesn't matter what we push for the string here.  What
+             the code at `fail' tests is the value for the pattern.  */
+          PUSH_FAILURE_POINT (NULL, NULL, -2);
+          goto unconditional_jump;
+
+
+        /* At the end of an alternative, we need to push a dummy failure
+           point in case we are followed by a `pop_failure_jump', because
+           we don't want the failure point for the alternative to be
+           popped.  For example, matching `(a|ab)*' against `aab'
+           requires that we match the `ab' alternative.  */
+        case push_dummy_failure:
+          DEBUG_PRINT1 ("EXECUTING push_dummy_failure.\n");
+          /* See comments just above at `dummy_failure_jump' about the
+             two zeroes.  */
+          PUSH_FAILURE_POINT (NULL, NULL, -2);
+          break;
+
+        /* Have to succeed matching what follows at least n times.
+           After that, handle like `on_failure_jump'.  */
+        case succeed_n:
+          EXTRACT_NUMBER (mcnt, p + 2);
+          DEBUG_PRINT2 ("EXECUTING succeed_n %d.\n", mcnt);
+
+          assert (mcnt >= 0);
+          /* Originally, this is how many times we HAVE to succeed.  */
+          if (mcnt > 0)
+            {
+               mcnt--;
+	       p += 2;
+               STORE_NUMBER_AND_INCR (p, mcnt);
+#ifdef _LIBC
+               DEBUG_PRINT3 ("  Setting %p to %d.\n", p - 2, mcnt);
+#else
+               DEBUG_PRINT3 ("  Setting 0x%x to %d.\n", p - 2, mcnt);
+#endif
+            }
+	  else if (mcnt == 0)
+            {
+#ifdef _LIBC
+              DEBUG_PRINT2 ("  Setting two bytes from %p to no_op.\n", p+2);
+#else
+              DEBUG_PRINT2 ("  Setting two bytes from 0x%x to no_op.\n", p+2);
+#endif
+	      p[2] = (unsigned char) no_op;
+              p[3] = (unsigned char) no_op;
+              goto on_failure;
+            }
+          break;
+
+        case jump_n:
+          EXTRACT_NUMBER (mcnt, p + 2);
+          DEBUG_PRINT2 ("EXECUTING jump_n %d.\n", mcnt);
+
+          /* Originally, this is how many times we CAN jump.  */
+          if (mcnt)
+            {
+               mcnt--;
+               STORE_NUMBER (p + 2, mcnt);
+#ifdef _LIBC
+               DEBUG_PRINT3 ("  Setting %p to %d.\n", p + 2, mcnt);
+#else
+               DEBUG_PRINT3 ("  Setting 0x%x to %d.\n", p + 2, mcnt);
+#endif
+	       goto unconditional_jump;
+            }
+          /* If don't have to jump any more, skip over the rest of command.  */
+	  else
+	    p += 4;
+          break;
+
+	case set_number_at:
+	  {
+            DEBUG_PRINT1 ("EXECUTING set_number_at.\n");
+
+            EXTRACT_NUMBER_AND_INCR (mcnt, p);
+            p1 = p + mcnt;
+            EXTRACT_NUMBER_AND_INCR (mcnt, p);
+#ifdef _LIBC
+            DEBUG_PRINT3 ("  Setting %p to %d.\n", p1, mcnt);
+#else
+            DEBUG_PRINT3 ("  Setting 0x%x to %d.\n", p1, mcnt);
+#endif
+	    STORE_NUMBER (p1, mcnt);
+            break;
+          }
+
+#if 0
+	/* The DEC Alpha C compiler 3.x generates incorrect code for the
+	   test  WORDCHAR_P (d - 1) != WORDCHAR_P (d)  in the expansion of
+	   AT_WORD_BOUNDARY, so this code is disabled.  Expanding the
+	   macro and introducing temporary variables works around the bug.  */
+
+	case wordbound:
+	  DEBUG_PRINT1 ("EXECUTING wordbound.\n");
+	  if (AT_WORD_BOUNDARY (d))
+	    break;
+	  goto fail;
+
+	case notwordbound:
+	  DEBUG_PRINT1 ("EXECUTING notwordbound.\n");
+	  if (AT_WORD_BOUNDARY (d))
+	    goto fail;
+	  break;
+#else
+	case wordbound:
+	{
+	  boolean prevchar, thischar;
+
+	  DEBUG_PRINT1 ("EXECUTING wordbound.\n");
+	  if (AT_STRINGS_BEG (d) || AT_STRINGS_END (d))
+	    break;
+
+	  prevchar = WORDCHAR_P (d - 1);
+	  thischar = WORDCHAR_P (d);
+	  if (prevchar != thischar)
+	    break;
+	  goto fail;
+	}
+
+      case notwordbound:
+	{
+	  boolean prevchar, thischar;
+
+	  DEBUG_PRINT1 ("EXECUTING notwordbound.\n");
+	  if (AT_STRINGS_BEG (d) || AT_STRINGS_END (d))
+	    goto fail;
+
+	  prevchar = WORDCHAR_P (d - 1);
+	  thischar = WORDCHAR_P (d);
+	  if (prevchar != thischar)
+	    goto fail;
+	  break;
+	}
+#endif
+
+	case wordbeg:
+          DEBUG_PRINT1 ("EXECUTING wordbeg.\n");
+	  if (WORDCHAR_P (d) && (AT_STRINGS_BEG (d) || !WORDCHAR_P (d - 1)))
+	    break;
+          goto fail;
+
+	case wordend:
+          DEBUG_PRINT1 ("EXECUTING wordend.\n");
+	  if (!AT_STRINGS_BEG (d) && WORDCHAR_P (d - 1)
+              && (!WORDCHAR_P (d) || AT_STRINGS_END (d)))
+	    break;
+          goto fail;
+
+#ifdef emacs
+  	case before_dot:
+          DEBUG_PRINT1 ("EXECUTING before_dot.\n");
+ 	  if (PTR_CHAR_POS ((unsigned char *) d) >= point)
+  	    goto fail;
+  	  break;
+
+  	case at_dot:
+          DEBUG_PRINT1 ("EXECUTING at_dot.\n");
+ 	  if (PTR_CHAR_POS ((unsigned char *) d) != point)
+  	    goto fail;
+  	  break;
+
+  	case after_dot:
+          DEBUG_PRINT1 ("EXECUTING after_dot.\n");
+          if (PTR_CHAR_POS ((unsigned char *) d) <= point)
+  	    goto fail;
+  	  break;
+
+	case syntaxspec:
+          DEBUG_PRINT2 ("EXECUTING syntaxspec %d.\n", mcnt);
+	  mcnt = *p++;
+	  goto matchsyntax;
+
+        case wordchar:
+          DEBUG_PRINT1 ("EXECUTING Emacs wordchar.\n");
+	  mcnt = (int) Sword;
+        matchsyntax:
+	  PREFETCH ();
+	  /* Can't use *d++ here; SYNTAX may be an unsafe macro.  */
+	  d++;
+	  if (SYNTAX (d[-1]) != (enum syntaxcode) mcnt)
+	    goto fail;
+          SET_REGS_MATCHED ();
+	  break;
+
+	case notsyntaxspec:
+          DEBUG_PRINT2 ("EXECUTING notsyntaxspec %d.\n", mcnt);
+	  mcnt = *p++;
+	  goto matchnotsyntax;
+
+        case notwordchar:
+          DEBUG_PRINT1 ("EXECUTING Emacs notwordchar.\n");
+	  mcnt = (int) Sword;
+        matchnotsyntax:
+	  PREFETCH ();
+	  /* Can't use *d++ here; SYNTAX may be an unsafe macro.  */
+	  d++;
+	  if (SYNTAX (d[-1]) == (enum syntaxcode) mcnt)
+	    goto fail;
+	  SET_REGS_MATCHED ();
+          break;
+
+#else /* not emacs */
+	case wordchar:
+          DEBUG_PRINT1 ("EXECUTING non-Emacs wordchar.\n");
+	  PREFETCH ();
+          if (!WORDCHAR_P (d))
+            goto fail;
+	  SET_REGS_MATCHED ();
+          d++;
+	  break;
+
+	case notwordchar:
+          DEBUG_PRINT1 ("EXECUTING non-Emacs notwordchar.\n");
+	  PREFETCH ();
+	  if (WORDCHAR_P (d))
+            goto fail;
+          SET_REGS_MATCHED ();
+          d++;
+	  break;
+#endif /* not emacs */
+
+        default:
+          abort ();
+	}
+      continue;  /* Successfully executed one pattern command; keep going.  */
+
+
+    /* We goto here if a matching operation fails. */
+    fail:
+      if (!FAIL_STACK_EMPTY ())
+	{ /* A restart point is known.  Restore to that state.  */
+          DEBUG_PRINT1 ("\nFAIL:\n");
+          POP_FAILURE_POINT (d, p,
+                             lowest_active_reg, highest_active_reg,
+                             regstart, regend, reg_info);
+
+          /* If this failure point is a dummy, try the next one.  */
+          if (!p)
+	    goto fail;
+
+          /* If we failed to the end of the pattern, don't examine *p.  */
+	  assert (p <= pend);
+          if (p < pend)
+            {
+              boolean is_a_jump_n = false;
+
+              /* If failed to a backwards jump that's part of a repetition
+                 loop, need to pop this failure point and use the next one.  */
+              switch ((re_opcode_t) *p)
+                {
+                case jump_n:
+                  is_a_jump_n = true;
+                case maybe_pop_jump:
+                case pop_failure_jump:
+                case jump:
+                  p1 = p + 1;
+                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+                  p1 += mcnt;
+
+                  if ((is_a_jump_n && (re_opcode_t) *p1 == succeed_n)
+                      || (!is_a_jump_n
+                          && (re_opcode_t) *p1 == on_failure_jump))
+                    goto fail;
+                  break;
+                default:
+                  /* do nothing */ ;
+                }
+            }
+
+          if (d >= string1 && d <= end1)
+	    dend = end_match_1;
+        }
+      else
+        break;   /* Matching at this starting point really fails.  */
+    } /* for (;;) */
+
+  if (best_regs_set)
+    goto restore_best_regs;
+
+  FREE_VARIABLES ();
+
+  return -1;         			/* Failure to match.  */
+} /* re_match_2 */
+
+/* Subroutine definitions for re_match_2.  */
+
+
+/* We are passed P pointing to a register number after a start_memory.
+
+   Return true if the pattern up to the corresponding stop_memory can
+   match the empty string, and false otherwise.
+
+   If we find the matching stop_memory, sets P to point to one past its number.
+   Otherwise, sets P to an undefined byte less than or equal to END.
+
+   We don't handle duplicates properly (yet).  */
+
+static boolean
+group_match_null_string_p (p, end, reg_info)
+    unsigned char **p, *end;
+    register_info_type *reg_info;
+{
+  int mcnt;
+  /* Point to after the args to the start_memory.  */
+  unsigned char *p1 = *p + 2;
+
+  while (p1 < end)
+    {
+      /* Skip over opcodes that can match nothing, and return true or
+	 false, as appropriate, when we get to one that can't, or to the
+         matching stop_memory.  */
+
+      switch ((re_opcode_t) *p1)
+        {
+        /* Could be either a loop or a series of alternatives.  */
+        case on_failure_jump:
+          p1++;
+          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+
+          /* If the next operation is not a jump backwards in the
+	     pattern.  */
+
+	  if (mcnt >= 0)
+	    {
+              /* Go through the on_failure_jumps of the alternatives,
+                 seeing if any of the alternatives cannot match nothing.
+                 The last alternative starts with only a jump,
+                 whereas the rest start with on_failure_jump and end
+                 with a jump, e.g., here is the pattern for `a|b|c':
+
+                 /on_failure_jump/0/6/exactn/1/a/jump_past_alt/0/6
+                 /on_failure_jump/0/6/exactn/1/b/jump_past_alt/0/3
+                 /exactn/1/c
+
+                 So, we have to first go through the first (n-1)
+                 alternatives and then deal with the last one separately.  */
+
+
+              /* Deal with the first (n-1) alternatives, which start
+                 with an on_failure_jump (see above) that jumps to right
+                 past a jump_past_alt.  */
+
+              while ((re_opcode_t) p1[mcnt-3] == jump_past_alt)
+                {
+                  /* `mcnt' holds how many bytes long the alternative
+                     is, including the ending `jump_past_alt' and
+                     its number.  */
+
+                  if (!alt_match_null_string_p (p1, p1 + mcnt - 3,
+				                      reg_info))
+                    return false;
+
+                  /* Move to right after this alternative, including the
+		     jump_past_alt.  */
+                  p1 += mcnt;
+
+                  /* Break if it's the beginning of an n-th alternative
+                     that doesn't begin with an on_failure_jump.  */
+                  if ((re_opcode_t) *p1 != on_failure_jump)
+                    break;
+
+		  /* Still have to check that it's not an n-th
+		     alternative that starts with an on_failure_jump.  */
+		  p1++;
+                  EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+                  if ((re_opcode_t) p1[mcnt-3] != jump_past_alt)
+                    {
+		      /* Get to the beginning of the n-th alternative.  */
+                      p1 -= 3;
+                      break;
+                    }
+                }
+
+              /* Deal with the last alternative: go back and get number
+                 of the `jump_past_alt' just before it.  `mcnt' contains
+                 the length of the alternative.  */
+              EXTRACT_NUMBER (mcnt, p1 - 2);
+
+              if (!alt_match_null_string_p (p1, p1 + mcnt, reg_info))
+                return false;
+
+              p1 += mcnt;	/* Get past the n-th alternative.  */
+            } /* if mcnt > 0 */
+          break;
+
+
+        case stop_memory:
+	  assert (p1[1] == **p);
+          *p = p1 + 2;
+          return true;
+
+
+        default:
+          if (!common_op_match_null_string_p (&p1, end, reg_info))
+            return false;
+        }
+    } /* while p1 < end */
+
+  return false;
+} /* group_match_null_string_p */
+
+
+/* Similar to group_match_null_string_p, but doesn't deal with alternatives:
+   It expects P to be the first byte of a single alternative and END one
+   byte past the last. The alternative can contain groups.  */
+
+static boolean
+alt_match_null_string_p (p, end, reg_info)
+    unsigned char *p, *end;
+    register_info_type *reg_info;
+{
+  int mcnt;
+  unsigned char *p1 = p;
+
+  while (p1 < end)
+    {
+      /* Skip over opcodes that can match nothing, and break when we get
+         to one that can't.  */
+
+      switch ((re_opcode_t) *p1)
+        {
+	/* It's a loop.  */
+        case on_failure_jump:
+          p1++;
+          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+          p1 += mcnt;
+          break;
+
+	default:
+          if (!common_op_match_null_string_p (&p1, end, reg_info))
+            return false;
+        }
+    }  /* while p1 < end */
+
+  return true;
+} /* alt_match_null_string_p */
+
+
+/* Deals with the ops common to group_match_null_string_p and
+   alt_match_null_string_p.
+
+   Sets P to one after the op and its arguments, if any.  */
+
+static boolean
+common_op_match_null_string_p (p, end, reg_info)
+    unsigned char **p, *end;
+    register_info_type *reg_info;
+{
+  int mcnt;
+  boolean ret;
+  int reg_no;
+  unsigned char *p1 = *p;
+
+  switch ((re_opcode_t) *p1++)
+    {
+    case no_op:
+    case begline:
+    case endline:
+    case begbuf:
+    case endbuf:
+    case wordbeg:
+    case wordend:
+    case wordbound:
+    case notwordbound:
+#ifdef emacs
+    case before_dot:
+    case at_dot:
+    case after_dot:
+#endif
+      break;
+
+    case start_memory:
+      reg_no = *p1;
+      assert (reg_no > 0 && reg_no <= MAX_REGNUM);
+      ret = group_match_null_string_p (&p1, end, reg_info);
+
+      /* Have to set this here in case we're checking a group which
+         contains a group and a back reference to it.  */
+
+      if (REG_MATCH_NULL_STRING_P (reg_info[reg_no]) == MATCH_NULL_UNSET_VALUE)
+        REG_MATCH_NULL_STRING_P (reg_info[reg_no]) = ret;
+
+      if (!ret)
+        return false;
+      break;
+
+    /* If this is an optimized succeed_n for zero times, make the jump.  */
+    case jump:
+      EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+      if (mcnt >= 0)
+        p1 += mcnt;
+      else
+        return false;
+      break;
+
+    case succeed_n:
+      /* Get to the number of times to succeed.  */
+      p1 += 2;
+      EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+
+      if (mcnt == 0)
+        {
+          p1 -= 4;
+          EXTRACT_NUMBER_AND_INCR (mcnt, p1);
+          p1 += mcnt;
+        }
+      else
+        return false;
+      break;
+
+    case duplicate:
+      if (!REG_MATCH_NULL_STRING_P (reg_info[*p1]))
+        return false;
+      break;
+
+    case set_number_at:
+      p1 += 4;
+
+    default:
+      /* All other opcodes mean we cannot match the empty string.  */
+      return false;
+  }
+
+  *p = p1;
+  return true;
+} /* common_op_match_null_string_p */
+
+
+/* Return zero if TRANSLATE[S1] and TRANSLATE[S2] are identical for LEN
+   bytes; nonzero otherwise.  */
+
+static int
+bcmp_translate (s1, s2, len, translate)
+     const char *s1, *s2;
+     register int len;
+     RE_TRANSLATE_TYPE translate;
+{
+  register const unsigned char *p1 = (const unsigned char *) s1;
+  register const unsigned char *p2 = (const unsigned char *) s2;
+  while (len)
+    {
+      if (translate[*p1++] != translate[*p2++]) return 1;
+      len--;
+    }
+  return 0;
+}
+
+/* Entry points for GNU code.  */
+
+/* re_compile_pattern is the GNU regular expression compiler: it
+   compiles PATTERN (of length SIZE) and puts the result in BUFP.
+   Returns 0 if the pattern was valid, otherwise an error string.
+
+   Assumes the `allocated' (and perhaps `buffer') and `translate' fields
+   are set in BUFP on entry.
+
+   We call regex_compile to do the actual compilation.  */
+
+const char *
+re_compile_pattern (pattern, length, bufp)
+     const char *pattern;
+     size_t length;
+     struct re_pattern_buffer *bufp;
+{
+  reg_errcode_t ret;
+
+  /* GNU code is written to assume at least RE_NREGS registers will be set
+     (and at least one extra will be -1).  */
+  bufp->regs_allocated = REGS_UNALLOCATED;
+
+  /* And GNU code determines whether or not to get register information
+     by passing null for the REGS argument to re_match, etc., not by
+     setting no_sub.  */
+  bufp->no_sub = 0;
+
+  /* Match anchors at newline.  */
+  bufp->newline_anchor = 1;
+
+  ret = regex_compile (pattern, length, re_syntax_options, bufp);
+
+  if (!ret)
+    return NULL;
+  return gettext (re_error_msgid[(int) ret]);
+}
+#ifdef _LIBC
+weak_alias (__re_compile_pattern, re_compile_pattern)
+#endif
+
+/* Entry points compatible with 4.2 BSD regex library.  We don't define
+   them unless specifically requested.  */
+
+#if defined _REGEX_RE_COMP || defined _LIBC
+
+/* BSD has one and only one pattern buffer.  */
+static struct re_pattern_buffer re_comp_buf;
+
+char *
+#ifdef _LIBC
+/* Make these definitions weak in libc, so POSIX programs can redefine
+   these names if they don't use our functions, and still use
+   regcomp/regexec below without link errors.  */
+weak_function
+#endif
+re_comp (s)
+    const char *s;
+{
+  reg_errcode_t ret;
+
+  if (!s)
+    {
+      if (!re_comp_buf.buffer)
+	return gettext ("No previous regular expression");
+      return 0;
+    }
+
+  if (!re_comp_buf.buffer)
+    {
+      re_comp_buf.buffer = (unsigned char *) malloc (200);
+      if (re_comp_buf.buffer == NULL)
+        return (char *) gettext (re_error_msgid[(int) REG_ESPACE]);
+      re_comp_buf.allocated = 200;
+
+      re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH);
+      if (re_comp_buf.fastmap == NULL)
+	return (char *) gettext (re_error_msgid[(int) REG_ESPACE]);
+    }
+
+  /* Since `re_exec' always passes NULL for the `regs' argument, we
+     don't need to initialize the pattern buffer fields which affect it.  */
+
+  /* Match anchors at newlines.  */
+  re_comp_buf.newline_anchor = 1;
+
+  ret = regex_compile (s, strlen (s), re_syntax_options, &re_comp_buf);
+
+  if (!ret)
+    return NULL;
+
+  /* Yes, we're discarding `const' here if !HAVE_LIBINTL.  */
+  return (char *) gettext (re_error_msgid[(int) ret]);
+}
+
+
+int
+#ifdef _LIBC
+weak_function
+#endif
+re_exec (s)
+    const char *s;
+{
+  const int len = strlen (s);
+  return
+    0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0);
+}
+
+#endif /* _REGEX_RE_COMP */
+
+/* POSIX.2 functions.  Don't define these for Emacs.  */
+
+#ifndef emacs
+
+/* regcomp takes a regular expression as a string and compiles it.
+
+   PREG is a regex_t *.  We do not expect any fields to be initialized,
+   since POSIX says we shouldn't.  Thus, we set
+
+     `buffer' to the compiled pattern;
+     `used' to the length of the compiled pattern;
+     `syntax' to RE_SYNTAX_POSIX_EXTENDED if the
+       REG_EXTENDED bit in CFLAGS is set; otherwise, to
+       RE_SYNTAX_POSIX_BASIC;
+     `newline_anchor' to REG_NEWLINE being set in CFLAGS;
+     `fastmap' and `fastmap_accurate' to zero;
+     `re_nsub' to the number of subexpressions in PATTERN.
+
+   PATTERN is the address of the pattern string.
+
+   CFLAGS is a series of bits which affect compilation.
+
+     If REG_EXTENDED is set, we use POSIX extended syntax; otherwise, we
+     use POSIX basic syntax.
+
+     If REG_NEWLINE is set, then . and [^...] don't match newline.
+     Also, regexec will try a match beginning after every newline.
+
+     If REG_ICASE is set, then we considers upper- and lowercase
+     versions of letters to be equivalent when matching.
+
+     If REG_NOSUB is set, then when PREG is passed to regexec, that
+     routine will report only success or failure, and nothing about the
+     registers.
+
+   It returns 0 if it succeeds, nonzero if it doesn't.  (See gnu-regex.h for
+   the return codes and their meanings.)  */
+
+int
+regcomp (preg, pattern, cflags)
+    regex_t *preg;
+    const char *pattern;
+    int cflags;
+{
+  reg_errcode_t ret;
+  reg_syntax_t syntax
+    = (cflags & REG_EXTENDED) ?
+      RE_SYNTAX_POSIX_EXTENDED : RE_SYNTAX_POSIX_BASIC;
+
+  /* regex_compile will allocate the space for the compiled pattern.  */
+  preg->buffer = 0;
+  preg->allocated = 0;
+  preg->used = 0;
+
+  /* Don't bother to use a fastmap when searching.  This simplifies the
+     REG_NEWLINE case: if we used a fastmap, we'd have to put all the
+     characters after newlines into the fastmap.  This way, we just try
+     every character.  */
+  preg->fastmap = 0;
+
+  if (cflags & REG_ICASE)
+    {
+      unsigned i;
+
+      preg->translate
+	= (RE_TRANSLATE_TYPE) malloc (CHAR_SET_SIZE
+				      * sizeof (*(RE_TRANSLATE_TYPE)0));
+      if (preg->translate == NULL)
+        return (int) REG_ESPACE;
+
+      /* Map uppercase characters to corresponding lowercase ones.  */
+      for (i = 0; i < CHAR_SET_SIZE; i++)
+        preg->translate[i] = ISUPPER (i) ? tolower (i) : i;
+    }
+  else
+    preg->translate = NULL;
+
+  /* If REG_NEWLINE is set, newlines are treated differently.  */
+  if (cflags & REG_NEWLINE)
+    { /* REG_NEWLINE implies neither . nor [^...] match newline.  */
+      syntax &= ~RE_DOT_NEWLINE;
+      syntax |= RE_HAT_LISTS_NOT_NEWLINE;
+      /* It also changes the matching behavior.  */
+      preg->newline_anchor = 1;
+    }
+  else
+    preg->newline_anchor = 0;
+
+  preg->no_sub = !!(cflags & REG_NOSUB);
+
+  /* POSIX says a null character in the pattern terminates it, so we
+     can use strlen here in compiling the pattern.  */
+  ret = regex_compile (pattern, strlen (pattern), syntax, preg);
+
+  /* POSIX doesn't distinguish between an unmatched open-group and an
+     unmatched close-group: both are REG_EPAREN.  */
+  if (ret == REG_ERPAREN) ret = REG_EPAREN;
+
+  return (int) ret;
+}
+#ifdef _LIBC
+weak_alias (__regcomp, regcomp)
+#endif
+
+
+/* regexec searches for a given pattern, specified by PREG, in the
+   string STRING.
+
+   If NMATCH is zero or REG_NOSUB was set in the cflags argument to
+   `regcomp', we ignore PMATCH.  Otherwise, we assume PMATCH has at
+   least NMATCH elements, and we set them to the offsets of the
+   corresponding matched substrings.
+
+   EFLAGS specifies `execution flags' which affect matching: if
+   REG_NOTBOL is set, then ^ does not match at the beginning of the
+   string; if REG_NOTEOL is set, then $ does not match at the end.
+
+   We return 0 if we find a match and REG_NOMATCH if not.  */
+
+int
+regexec (preg, string, nmatch, pmatch, eflags)
+    const regex_t *preg;
+    const char *string;
+    size_t nmatch;
+    regmatch_t pmatch[];
+    int eflags;
+{
+  int ret;
+  struct re_registers regs;
+  regex_t private_preg;
+  int len = strlen (string);
+  boolean want_reg_info = !preg->no_sub && nmatch > 0;
+
+  private_preg = *preg;
+
+  private_preg.not_bol = !!(eflags & REG_NOTBOL);
+  private_preg.not_eol = !!(eflags & REG_NOTEOL);
+
+  /* The user has told us exactly how many registers to return
+     information about, via `nmatch'.  We have to pass that on to the
+     matching routines.  */
+  private_preg.regs_allocated = REGS_FIXED;
+
+  if (want_reg_info)
+    {
+      regs.num_regs = nmatch;
+      regs.start = TALLOC (nmatch, regoff_t);
+      regs.end = TALLOC (nmatch, regoff_t);
+      if (regs.start == NULL || regs.end == NULL)
+        return (int) REG_NOMATCH;
+    }
+
+  /* Perform the searching operation.  */
+  ret = re_search (&private_preg, string, len,
+                   /* start: */ 0, /* range: */ len,
+                   want_reg_info ? &regs : (struct re_registers *) 0);
+
+  /* Copy the register information to the POSIX structure.  */
+  if (want_reg_info)
+    {
+      if (ret >= 0)
+        {
+          unsigned r;
+
+          for (r = 0; r < nmatch; r++)
+            {
+              pmatch[r].rm_so = regs.start[r];
+              pmatch[r].rm_eo = regs.end[r];
+            }
+        }
+
+      /* If we needed the temporary register info, free the space now.  */
+      free (regs.start);
+      free (regs.end);
+    }
+
+  /* We want zero return to mean success, unlike `re_search'.  */
+  return ret >= 0 ? (int) REG_NOERROR : (int) REG_NOMATCH;
+}
+#ifdef _LIBC
+weak_alias (__regexec, regexec)
+#endif
+
+
+/* Returns a message corresponding to an error code, ERRCODE, returned
+   from either regcomp or regexec.   We don't use PREG here.  */
+
+size_t
+__regerror (errcode, preg, errbuf, errbuf_size)
+    int errcode;
+    const regex_t *preg;
+    char *errbuf;
+    size_t errbuf_size;
+{
+  const char *msg;
+  size_t msg_size;
+
+  if (errcode < 0
+      || errcode >= (int) (sizeof (re_error_msgid)
+			   / sizeof (re_error_msgid[0])))
+    /* Only error codes returned by the rest of the code should be passed
+       to this routine.  If we are given anything else, or if other regex
+       code generates an invalid error code, then the program has a bug.
+       Dump core so we can fix it.  */
+    abort ();
+
+  msg = gettext (re_error_msgid[errcode]);
+
+  msg_size = strlen (msg) + 1; /* Includes the null.  */
+
+  if (errbuf_size != 0)
+    {
+      if (msg_size > errbuf_size)
+        {
+#if defined HAVE_MEMPCPY || defined _LIBC
+	  *((char *) __mempcpy (errbuf, msg, errbuf_size - 1)) = '\0';
+#else
+          memcpy (errbuf, msg, errbuf_size - 1);
+          errbuf[errbuf_size - 1] = 0;
+#endif
+        }
+      else
+        memcpy (errbuf, msg, msg_size);
+    }
+
+  return msg_size;
+}
+#ifdef _LIBC
+weak_alias (__regerror, regerror)
+#endif
+
+
+/* Free dynamically allocated space used by PREG.  */
+
+void
+regfree (preg)
+    regex_t *preg;
+{
+  if (preg->buffer != NULL)
+    free (preg->buffer);
+  preg->buffer = NULL;
+
+  preg->allocated = 0;
+  preg->used = 0;
+
+  if (preg->fastmap != NULL)
+    free (preg->fastmap);
+  preg->fastmap = NULL;
+  preg->fastmap_accurate = 0;
+
+  if (preg->translate != NULL)
+    free (preg->translate);
+  preg->translate = NULL;
+}
+#ifdef _LIBC
+weak_alias (__regfree, regfree)
+#endif
+
+#endif /* not emacs  */
diff --git a/gdb/gnu-regex.h b/gdb/gnu-regex.h
new file mode 100644
index 0000000..9153ea1
--- /dev/null
+++ b/gdb/gnu-regex.h
@@ -0,0 +1,576 @@
+/* Definitions for data structures and routines for the regular
+   expression library, version 0.12.
+   Copyright (C) 1985,89,90,91,92,93,95,96,97,98 Free Software Foundation, Inc.
+
+   NOTE: The canonical source of this file is maintained with the 
+   GNU C Library.  Bugs can be reported to bug-glibc@prep.ai.mit.edu.
+
+   This program is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published by the
+   Free Software Foundation; either version 2, or (at your option) any
+   later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software Foundation, 
+   Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _REGEX_H
+#define _REGEX_H 1
+
+/* Allow the use in C++ code.  */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* POSIX says that <sys/types.h> must be included (by the caller) before
+   <regex.h>.  */
+
+#if !defined _POSIX_C_SOURCE && !defined _POSIX_SOURCE && defined VMS
+/* VMS doesn't have `size_t' in <sys/types.h>, even though POSIX says it
+   should be there.  */
+# include <stddef.h>
+#endif
+
+/* GDB LOCAL: define _REGEX_RE_COMP to get BSD style re_comp and re_exec */
+#ifndef _REGEX_RE_COMP
+#define _REGEX_RE_COMP
+#endif
+
+/* The following two types have to be signed and unsigned integer type
+   wide enough to hold a value of a pointer.  For most ANSI compilers
+   ptrdiff_t and size_t should be likely OK.  Still size of these two
+   types is 2 for Microsoft C.  Ugh... */
+typedef long int s_reg_t;
+typedef unsigned long int active_reg_t;
+
+/* The following bits are used to determine the regexp syntax we
+   recognize.  The set/not-set meanings are chosen so that Emacs syntax
+   remains the value 0.  The bits are given in alphabetical order, and
+   the definitions shifted by one from the previous bit; thus, when we
+   add or remove a bit, only one other definition need change.  */
+typedef unsigned long int reg_syntax_t;
+
+/* If this bit is not set, then \ inside a bracket expression is literal.
+   If set, then such a \ quotes the following character.  */
+#define RE_BACKSLASH_ESCAPE_IN_LISTS ((unsigned long int) 1)
+
+/* If this bit is not set, then + and ? are operators, and \+ and \? are
+     literals.
+   If set, then \+ and \? are operators and + and ? are literals.  */
+#define RE_BK_PLUS_QM (RE_BACKSLASH_ESCAPE_IN_LISTS << 1)
+
+/* If this bit is set, then character classes are supported.  They are:
+     [:alpha:], [:upper:], [:lower:],  [:digit:], [:alnum:], [:xdigit:],
+     [:space:], [:print:], [:punct:], [:graph:], and [:cntrl:].
+   If not set, then character classes are not supported.  */
+#define RE_CHAR_CLASSES (RE_BK_PLUS_QM << 1)
+
+/* If this bit is set, then ^ and $ are always anchors (outside bracket
+     expressions, of course).
+   If this bit is not set, then it depends:
+        ^  is an anchor if it is at the beginning of a regular
+           expression or after an open-group or an alternation operator;
+        $  is an anchor if it is at the end of a regular expression, or
+           before a close-group or an alternation operator.
+
+   This bit could be (re)combined with RE_CONTEXT_INDEP_OPS, because
+   POSIX draft 11.2 says that * etc. in leading positions is undefined.
+   We already implemented a previous draft which made those constructs
+   invalid, though, so we haven't changed the code back.  */
+#define RE_CONTEXT_INDEP_ANCHORS (RE_CHAR_CLASSES << 1)
+
+/* If this bit is set, then special characters are always special
+     regardless of where they are in the pattern.
+   If this bit is not set, then special characters are special only in
+     some contexts; otherwise they are ordinary.  Specifically,
+     * + ? and intervals are only special when not after the beginning,
+     open-group, or alternation operator.  */
+#define RE_CONTEXT_INDEP_OPS (RE_CONTEXT_INDEP_ANCHORS << 1)
+
+/* If this bit is set, then *, +, ?, and { cannot be first in an re or
+     immediately after an alternation or begin-group operator.  */
+#define RE_CONTEXT_INVALID_OPS (RE_CONTEXT_INDEP_OPS << 1)
+
+/* If this bit is set, then . matches newline.
+   If not set, then it doesn't.  */
+#define RE_DOT_NEWLINE (RE_CONTEXT_INVALID_OPS << 1)
+
+/* If this bit is set, then . doesn't match NUL.
+   If not set, then it does.  */
+#define RE_DOT_NOT_NULL (RE_DOT_NEWLINE << 1)
+
+/* If this bit is set, nonmatching lists [^...] do not match newline.
+   If not set, they do.  */
+#define RE_HAT_LISTS_NOT_NEWLINE (RE_DOT_NOT_NULL << 1)
+
+/* If this bit is set, either \{...\} or {...} defines an
+     interval, depending on RE_NO_BK_BRACES.
+   If not set, \{, \}, {, and } are literals.  */
+#define RE_INTERVALS (RE_HAT_LISTS_NOT_NEWLINE << 1)
+
+/* If this bit is set, +, ? and | aren't recognized as operators.
+   If not set, they are.  */
+#define RE_LIMITED_OPS (RE_INTERVALS << 1)
+
+/* If this bit is set, newline is an alternation operator.
+   If not set, newline is literal.  */
+#define RE_NEWLINE_ALT (RE_LIMITED_OPS << 1)
+
+/* If this bit is set, then `{...}' defines an interval, and \{ and \}
+     are literals.
+  If not set, then `\{...\}' defines an interval.  */
+#define RE_NO_BK_BRACES (RE_NEWLINE_ALT << 1)
+
+/* If this bit is set, (...) defines a group, and \( and \) are literals.
+   If not set, \(...\) defines a group, and ( and ) are literals.  */
+#define RE_NO_BK_PARENS (RE_NO_BK_BRACES << 1)
+
+/* If this bit is set, then \<digit> matches <digit>.
+   If not set, then \<digit> is a back-reference.  */
+#define RE_NO_BK_REFS (RE_NO_BK_PARENS << 1)
+
+/* If this bit is set, then | is an alternation operator, and \| is literal.
+   If not set, then \| is an alternation operator, and | is literal.  */
+#define RE_NO_BK_VBAR (RE_NO_BK_REFS << 1)
+
+/* If this bit is set, then an ending range point collating higher
+     than the starting range point, as in [z-a], is invalid.
+   If not set, then when ending range point collates higher than the
+     starting range point, the range is ignored.  */
+#define RE_NO_EMPTY_RANGES (RE_NO_BK_VBAR << 1)
+
+/* If this bit is set, then an unmatched ) is ordinary.
+   If not set, then an unmatched ) is invalid.  */
+#define RE_UNMATCHED_RIGHT_PAREN_ORD (RE_NO_EMPTY_RANGES << 1)
+
+/* If this bit is set, succeed as soon as we match the whole pattern,
+   without further backtracking.  */
+#define RE_NO_POSIX_BACKTRACKING (RE_UNMATCHED_RIGHT_PAREN_ORD << 1)
+
+/* If this bit is set, do not process the GNU regex operators.
+   If not set, then the GNU regex operators are recognized. */
+#define RE_NO_GNU_OPS (RE_NO_POSIX_BACKTRACKING << 1)
+
+/* If this bit is set, turn on internal regex debugging.
+   If not set, and debugging was on, turn it off.
+   This only works if regex.c is compiled -DDEBUG.
+   We define this bit always, so that all that's needed to turn on
+   debugging is to recompile regex.c; the calling code can always have
+   this bit set, and it won't affect anything in the normal case. */
+#define RE_DEBUG (RE_NO_GNU_OPS << 1)
+
+/* This global variable defines the particular regexp syntax to use (for
+   some interfaces).  When a regexp is compiled, the syntax used is
+   stored in the pattern buffer, so changing this does not affect
+   already-compiled regexps.  */
+extern reg_syntax_t re_syntax_options;
+
+/* Define combinations of the above bits for the standard possibilities.
+   (The [[[ comments delimit what gets put into the Texinfo file, so
+   don't delete them!)  */
+/* [[[begin syntaxes]]] */
+#define RE_SYNTAX_EMACS 0
+
+#define RE_SYNTAX_AWK							\
+  (RE_BACKSLASH_ESCAPE_IN_LISTS   | RE_DOT_NOT_NULL			\
+   | RE_NO_BK_PARENS              | RE_NO_BK_REFS			\
+   | RE_NO_BK_VBAR                | RE_NO_EMPTY_RANGES			\
+   | RE_DOT_NEWLINE		  | RE_CONTEXT_INDEP_ANCHORS		\
+   | RE_UNMATCHED_RIGHT_PAREN_ORD | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GNU_AWK						\
+  ((RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS | RE_DEBUG)	\
+   & ~(RE_DOT_NOT_NULL | RE_INTERVALS | RE_CONTEXT_INDEP_OPS))
+
+#define RE_SYNTAX_POSIX_AWK 						\
+  (RE_SYNTAX_POSIX_EXTENDED | RE_BACKSLASH_ESCAPE_IN_LISTS		\
+   | RE_INTERVALS	    | RE_NO_GNU_OPS)
+
+#define RE_SYNTAX_GREP							\
+  (RE_BK_PLUS_QM              | RE_CHAR_CLASSES				\
+   | RE_HAT_LISTS_NOT_NEWLINE | RE_INTERVALS				\
+   | RE_NEWLINE_ALT)
+
+#define RE_SYNTAX_EGREP							\
+  (RE_CHAR_CLASSES        | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INDEP_OPS | RE_HAT_LISTS_NOT_NEWLINE			\
+   | RE_NEWLINE_ALT       | RE_NO_BK_PARENS				\
+   | RE_NO_BK_VBAR)
+
+#define RE_SYNTAX_POSIX_EGREP						\
+  (RE_SYNTAX_EGREP | RE_INTERVALS | RE_NO_BK_BRACES)
+
+/* P1003.2/D11.2, section 4.20.7.1, lines 5078ff.  */
+#define RE_SYNTAX_ED RE_SYNTAX_POSIX_BASIC
+
+#define RE_SYNTAX_SED RE_SYNTAX_POSIX_BASIC
+
+/* Syntax bits common to both basic and extended POSIX regex syntax.  */
+#define _RE_SYNTAX_POSIX_COMMON						\
+  (RE_CHAR_CLASSES | RE_DOT_NEWLINE      | RE_DOT_NOT_NULL		\
+   | RE_INTERVALS  | RE_NO_EMPTY_RANGES)
+
+#define RE_SYNTAX_POSIX_BASIC						\
+  (_RE_SYNTAX_POSIX_COMMON | RE_BK_PLUS_QM)
+
+/* Differs from ..._POSIX_BASIC only in that RE_BK_PLUS_QM becomes
+   RE_LIMITED_OPS, i.e., \? \+ \| are not recognized.  Actually, this
+   isn't minimal, since other operators, such as \`, aren't disabled.  */
+#define RE_SYNTAX_POSIX_MINIMAL_BASIC					\
+  (_RE_SYNTAX_POSIX_COMMON | RE_LIMITED_OPS)
+
+#define RE_SYNTAX_POSIX_EXTENDED					\
+  (_RE_SYNTAX_POSIX_COMMON | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INDEP_OPS  | RE_NO_BK_BRACES				\
+   | RE_NO_BK_PARENS       | RE_NO_BK_VBAR				\
+   | RE_UNMATCHED_RIGHT_PAREN_ORD)
+
+/* Differs from ..._POSIX_EXTENDED in that RE_CONTEXT_INVALID_OPS
+   replaces RE_CONTEXT_INDEP_OPS and RE_NO_BK_REFS is added.  */
+#define RE_SYNTAX_POSIX_MINIMAL_EXTENDED				\
+  (_RE_SYNTAX_POSIX_COMMON  | RE_CONTEXT_INDEP_ANCHORS			\
+   | RE_CONTEXT_INVALID_OPS | RE_NO_BK_BRACES				\
+   | RE_NO_BK_PARENS        | RE_NO_BK_REFS				\
+   | RE_NO_BK_VBAR	    | RE_UNMATCHED_RIGHT_PAREN_ORD)
+/* [[[end syntaxes]]] */
+
+/* Maximum number of duplicates an interval can allow.  Some systems
+   (erroneously) define this in other header files, but we want our
+   value, so remove any previous define.  */
+#ifdef RE_DUP_MAX
+# undef RE_DUP_MAX
+#endif
+/* If sizeof(int) == 2, then ((1 << 15) - 1) overflows.  */
+#define RE_DUP_MAX (0x7fff)
+
+
+/* POSIX `cflags' bits (i.e., information for `regcomp').  */
+
+/* If this bit is set, then use extended regular expression syntax.
+   If not set, then use basic regular expression syntax.  */
+#define REG_EXTENDED 1
+
+/* If this bit is set, then ignore case when matching.
+   If not set, then case is significant.  */
+#define REG_ICASE (REG_EXTENDED << 1)
+
+/* If this bit is set, then anchors do not match at newline
+     characters in the string.
+   If not set, then anchors do match at newlines.  */
+#define REG_NEWLINE (REG_ICASE << 1)
+
+/* If this bit is set, then report only success or fail in regexec.
+   If not set, then returns differ between not matching and errors.  */
+#define REG_NOSUB (REG_NEWLINE << 1)
+
+
+/* POSIX `eflags' bits (i.e., information for regexec).  */
+
+/* If this bit is set, then the beginning-of-line operator doesn't match
+     the beginning of the string (presumably because it's not the
+     beginning of a line).
+   If not set, then the beginning-of-line operator does match the
+     beginning of the string.  */
+#define REG_NOTBOL 1
+
+/* Like REG_NOTBOL, except for the end-of-line.  */
+#define REG_NOTEOL (1 << 1)
+
+
+/* If any error codes are removed, changed, or added, update the
+   `re_error_msg' table in regex.c.  */
+typedef enum
+{
+#if (_XOPEN_SOURCE - 0) == 500
+  REG_NOSYS = -1,	/* This will never happen for this implementation.  */
+#endif
+
+  REG_NOERROR = 0,	/* Success.  */
+  REG_NOMATCH,		/* Didn't find a match (for regexec).  */
+
+  /* POSIX regcomp return error codes.  (In the order listed in the
+     standard.)  */
+  REG_BADPAT,		/* Invalid pattern.  */
+  REG_ECOLLATE,		/* Not implemented.  */
+  REG_ECTYPE,		/* Invalid character class name.  */
+  REG_EESCAPE,		/* Trailing backslash.  */
+  REG_ESUBREG,		/* Invalid back reference.  */
+  REG_EBRACK,		/* Unmatched left bracket.  */
+  REG_EPAREN,		/* Parenthesis imbalance.  */
+  REG_EBRACE,		/* Unmatched \{.  */
+  REG_BADBR,		/* Invalid contents of \{\}.  */
+  REG_ERANGE,		/* Invalid range end.  */
+  REG_ESPACE,		/* Ran out of memory.  */
+  REG_BADRPT,		/* No preceding re for repetition op.  */
+
+  /* Error codes we've added.  */
+  REG_EEND,		/* Premature end.  */
+  REG_ESIZE,		/* Compiled pattern bigger than 2^16 bytes.  */
+  REG_ERPAREN		/* Unmatched ) or \); not returned from regcomp.  */
+} reg_errcode_t;
+
+/* This data structure represents a compiled pattern.  Before calling
+   the pattern compiler, the fields `buffer', `allocated', `fastmap',
+   `translate', and `no_sub' can be set.  After the pattern has been
+   compiled, the `re_nsub' field is available.  All other fields are
+   private to the regex routines.  */
+
+#ifndef RE_TRANSLATE_TYPE
+# define RE_TRANSLATE_TYPE char *
+#endif
+
+struct re_pattern_buffer
+{
+/* [[[begin pattern_buffer]]] */
+	/* Space that holds the compiled pattern.  It is declared as
+          `unsigned char *' because its elements are
+           sometimes used as array indexes.  */
+  unsigned char *buffer;
+
+	/* Number of bytes to which `buffer' points.  */
+  unsigned long int allocated;
+
+	/* Number of bytes actually used in `buffer'.  */
+  unsigned long int used;
+
+        /* Syntax setting with which the pattern was compiled.  */
+  reg_syntax_t syntax;
+
+        /* Pointer to a fastmap, if any, otherwise zero.  re_search uses
+           the fastmap, if there is one, to skip over impossible
+           starting points for matches.  */
+  char *fastmap;
+
+        /* Either a translate table to apply to all characters before
+           comparing them, or zero for no translation.  The translation
+           is applied to a pattern when it is compiled and to a string
+           when it is matched.  */
+  RE_TRANSLATE_TYPE translate;
+
+	/* Number of subexpressions found by the compiler.  */
+  size_t re_nsub;
+
+        /* Zero if this pattern cannot match the empty string, one else.
+           Well, in truth it's used only in `re_search_2', to see
+           whether or not we should use the fastmap, so we don't set
+           this absolutely perfectly; see `re_compile_fastmap' (the
+           `duplicate' case).  */
+  unsigned can_be_null : 1;
+
+        /* If REGS_UNALLOCATED, allocate space in the `regs' structure
+             for `max (RE_NREGS, re_nsub + 1)' groups.
+           If REGS_REALLOCATE, reallocate space if necessary.
+           If REGS_FIXED, use what's there.  */
+#define REGS_UNALLOCATED 0
+#define REGS_REALLOCATE 1
+#define REGS_FIXED 2
+  unsigned regs_allocated : 2;
+
+        /* Set to zero when `regex_compile' compiles a pattern; set to one
+           by `re_compile_fastmap' if it updates the fastmap.  */
+  unsigned fastmap_accurate : 1;
+
+        /* If set, `re_match_2' does not return information about
+           subexpressions.  */
+  unsigned no_sub : 1;
+
+        /* If set, a beginning-of-line anchor doesn't match at the
+           beginning of the string.  */
+  unsigned not_bol : 1;
+
+        /* Similarly for an end-of-line anchor.  */
+  unsigned not_eol : 1;
+
+        /* If true, an anchor at a newline matches.  */
+  unsigned newline_anchor : 1;
+
+/* [[[end pattern_buffer]]] */
+};
+
+typedef struct re_pattern_buffer regex_t;
+
+/* Type for byte offsets within the string.  POSIX mandates this.  */
+typedef int regoff_t;
+
+
+/* This is the structure we store register match data in.  See
+   regex.texinfo for a full description of what registers match.  */
+struct re_registers
+{
+  unsigned num_regs;
+  regoff_t *start;
+  regoff_t *end;
+};
+
+
+/* If `regs_allocated' is REGS_UNALLOCATED in the pattern buffer,
+   `re_match_2' returns information about at least this many registers
+   the first time a `regs' structure is passed.  */
+#ifndef RE_NREGS
+# define RE_NREGS 30
+#endif
+
+
+/* POSIX specification for registers.  Aside from the different names than
+   `re_registers', POSIX uses an array of structures, instead of a
+   structure of arrays.  */
+typedef struct
+{
+  regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
+  regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
+} regmatch_t;
+
+/* Declarations for routines.  */
+
+/* To avoid duplicating every routine declaration -- once with a
+   prototype (if we are ANSI), and once without (if we aren't) -- we
+   use the following macro to declare argument types.  This
+   unfortunately clutters up the declarations a bit, but I think it's
+   worth it.  */
+
+#if __STDC__
+
+# define _RE_ARGS(args) args
+
+#else /* not __STDC__ */
+
+# define _RE_ARGS(args) ()
+
+#endif /* not __STDC__ */
+
+/* Sets the current default syntax to SYNTAX, and return the old syntax.
+   You can also simply assign to the `re_syntax_options' variable.  */
+extern reg_syntax_t __re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
+extern reg_syntax_t re_set_syntax _RE_ARGS ((reg_syntax_t syntax));
+
+/* Compile the regular expression PATTERN, with length LENGTH
+   and syntax given by the global `re_syntax_options', into the buffer
+   BUFFER.  Return NULL if successful, and an error string if not.  */
+extern const char *__re_compile_pattern
+  _RE_ARGS ((const char *pattern, size_t length,
+             struct re_pattern_buffer *buffer));
+extern const char *re_compile_pattern
+  _RE_ARGS ((const char *pattern, size_t length,
+             struct re_pattern_buffer *buffer));
+
+
+/* Compile a fastmap for the compiled pattern in BUFFER; used to
+   accelerate searches.  Return 0 if successful and -2 if was an
+   internal error.  */
+extern int __re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
+extern int re_compile_fastmap _RE_ARGS ((struct re_pattern_buffer *buffer));
+
+
+/* Search in the string STRING (with length LENGTH) for the pattern
+   compiled into BUFFER.  Start searching at position START, for RANGE
+   characters.  Return the starting position of the match, -1 for no
+   match, or -2 for an internal error.  Also return register
+   information in REGS (if REGS and BUFFER->no_sub are nonzero).  */
+extern int __re_search
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+            int length, int start, int range, struct re_registers *regs));
+extern int re_search
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+            int length, int start, int range, struct re_registers *regs));
+
+
+/* Like `re_search', but search in the concatenation of STRING1 and
+   STRING2.  Also, stop searching at index START + STOP.  */
+extern int __re_search_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, int range, struct re_registers *regs, int stop));
+extern int re_search_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, int range, struct re_registers *regs, int stop));
+
+
+/* Like `re_search', but return how many characters in STRING the regexp
+   in BUFFER matched, starting at position START.  */
+extern int __re_match
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+             int length, int start, struct re_registers *regs));
+extern int re_match
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string,
+             int length, int start, struct re_registers *regs));
+
+
+/* Relates to `re_match' as `re_search_2' relates to `re_search'.  */
+extern int __re_match_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, struct re_registers *regs, int stop));
+extern int re_match_2
+  _RE_ARGS ((struct re_pattern_buffer *buffer, const char *string1,
+             int length1, const char *string2, int length2,
+             int start, struct re_registers *regs, int stop));
+
+
+/* Set REGS to hold NUM_REGS registers, storing them in STARTS and
+   ENDS.  Subsequent matches using BUFFER and REGS will use this memory
+   for recording register information.  STARTS and ENDS must be
+   allocated with malloc, and must each be at least `NUM_REGS * sizeof
+   (regoff_t)' bytes long.
+
+   If NUM_REGS == 0, then subsequent matches should allocate their own
+   register data.
+
+   Unless this function is called, the first search or match using
+   PATTERN_BUFFER will allocate its own register data, without
+   freeing the old data.  */
+extern void __re_set_registers
+  _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
+             unsigned num_regs, regoff_t *starts, regoff_t *ends));
+extern void re_set_registers
+  _RE_ARGS ((struct re_pattern_buffer *buffer, struct re_registers *regs,
+             unsigned num_regs, regoff_t *starts, regoff_t *ends));
+
+#ifdef _REGEX_RE_COMP
+# ifndef _CRAY
+/* 4.2 bsd compatibility.  */
+extern char *re_comp _RE_ARGS ((const char *));
+extern int re_exec _RE_ARGS ((const char *));
+# endif
+#endif
+
+/* POSIX compatibility.  */
+extern int __regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern,
+				int __cflags));
+extern int regcomp _RE_ARGS ((regex_t *__preg, const char *__pattern,
+			      int __cflags));
+
+extern int __regexec _RE_ARGS ((const regex_t *__preg,
+				const char *__string, size_t __nmatch,
+				regmatch_t __pmatch[], int __eflags));
+extern int regexec _RE_ARGS ((const regex_t *__preg,
+			      const char *__string, size_t __nmatch,
+			      regmatch_t __pmatch[], int __eflags));
+
+extern size_t __regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
+				    char *__errbuf, size_t __errbuf_size));
+extern size_t regerror _RE_ARGS ((int __errcode, const regex_t *__preg,
+				  char *__errbuf, size_t __errbuf_size));
+
+extern void __regfree _RE_ARGS ((regex_t *__preg));
+extern void regfree _RE_ARGS ((regex_t *__preg));
+
+
+#ifdef __cplusplus
+}
+#endif	/* C++ */
+
+#endif /* regex.h */
+
+/*
+Local variables:
+make-backup-files: t
+version-control: t
+trim-versions-without-asking: nil
+End:
+*/
diff --git a/gdb/gould-tdep.c b/gdb/gould-tdep.c
new file mode 100644
index 0000000..1916cc2
--- /dev/null
+++ b/gdb/gould-tdep.c
@@ -0,0 +1,310 @@
+/* OBSOLETE /* GOULD RISC target-dependent code for GDB, the GNU debugger. */
+/* OBSOLETE    Copyright 1986, 1987, 1989, 1991 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #include "defs.h" */
+/* OBSOLETE #include "symtab.h" */
+/* OBSOLETE #include "frame.h" */
+/* OBSOLETE #include "gdbcore.h" */
+/* OBSOLETE #if defined GOULD_PN */
+/* OBSOLETE #include "opcode/pn.h" */
+/* OBSOLETE #else */
+/* OBSOLETE #include "opcode/np1.h" */
+/* OBSOLETE #endif */
+/* OBSOLETE  */
+/* OBSOLETE /* GOULD RISC instructions are never longer than this many bytes.  *x/ */
+/* OBSOLETE #define MAXLEN 4 */
+/* OBSOLETE  */
+/* OBSOLETE /* Number of elements in the opcode table.  *x/ */
+/* OBSOLETE #define NOPCODES (sizeof gld_opcodes / sizeof gld_opcodes[0]) */
+/* OBSOLETE  */
+/* OBSOLETE int */
+/* OBSOLETE gould_frame_chain_valid (chain, fi) */
+/* OBSOLETE      CORE_ADDR chain; */
+/* OBSOLETE      struct frame_info *fi;      /* not used here *x/ */
+/* OBSOLETE { */
+/* OBSOLETE   return (chain != 0 && chain != (thisframe)->frame); */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* Both gcc and cc return small structs in registers (i.e. in GDB */
+/* OBSOLETE    terminology, small structs don't use the struct return convention).  *x/ */
+/* OBSOLETE int */
+/* OBSOLETE gould_use_struct_convention (gcc_p, type) */
+/* OBSOLETE      int gcc_p; */
+/* OBSOLETE      struct type *type; */
+/* OBSOLETE { */
+/* OBSOLETE   return (TYPE_LENGTH(type) > 8); */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Print the GOULD instruction at address MEMADDR in debugged memory, */
+/* OBSOLETE    on STREAM.  Returns length of the instruction, in bytes.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE int */
+/* OBSOLETE gould_print_insn (memaddr, stream) */
+/* OBSOLETE      CORE_ADDR memaddr; */
+/* OBSOLETE      FILE *stream; */
+/* OBSOLETE { */
+/* OBSOLETE 	unsigned char buffer[MAXLEN]; */
+/* OBSOLETE 	register int i; */
+/* OBSOLETE 	register char *d; */
+/* OBSOLETE 	register int bestmask; */
+/* OBSOLETE 	unsigned best; */
+/* OBSOLETE 	int temp, index, bestlen; */
+/* OBSOLETE  */
+/* OBSOLETE 	read_memory (memaddr, buffer, MAXLEN); */
+/* OBSOLETE  */
+/* OBSOLETE 	bestmask = 0; */
+/* OBSOLETE 	index = -1; */
+/* OBSOLETE 	best = 0xffffffff; */
+/* OBSOLETE 	for (i = 0; i < NOPCODES; i++) */
+/* OBSOLETE 	{ */
+/* OBSOLETE 		register unsigned int opcode = gld_opcodes[i].opcode; */
+/* OBSOLETE 		register unsigned int mask = gld_opcodes[i].mask; */
+/* OBSOLETE 		register unsigned int len = gld_opcodes[i].length; */
+/* OBSOLETE 		register unsigned int test; */
+/* OBSOLETE  */
+/* OBSOLETE 		/* Get possible opcode bytes into integer *x/ */
+/* OBSOLETE 		test = buffer[0] << 24; */
+/* OBSOLETE 		test |= buffer[1] << 16; */
+/* OBSOLETE 		test |= buffer[2] << 8; */
+/* OBSOLETE 		test |= buffer[3]; */
+/* OBSOLETE  */
+/* OBSOLETE 		/* Mask with opcode and see if match *x/ */
+/* OBSOLETE 		if ((opcode & mask) == (test & mask)) */
+/* OBSOLETE 		{ */
+/* OBSOLETE 			/* See if second or third match *x/ */
+/* OBSOLETE 			if (index >= 0) */
+/* OBSOLETE 			{ */
+/* OBSOLETE 				/* Take new one if it looks good *x/ */
+/* OBSOLETE 				if (bestlen == MAXLEN && len == MAXLEN) */
+/* OBSOLETE 				{ */
+/* OBSOLETE 					/* See if lower bits matched *x/ */
+/* OBSOLETE 					if (((bestmask & 3) == 0) && */
+/* OBSOLETE 					    ((mask & 3) != 0)) */
+/* OBSOLETE 					{ */
+/* OBSOLETE 						bestmask = mask; */
+/* OBSOLETE 						bestlen = len; */
+/* OBSOLETE 						best = test; */
+/* OBSOLETE 						index = i; */
+/* OBSOLETE 					} */
+/* OBSOLETE 				} */
+/* OBSOLETE 			} */
+/* OBSOLETE 			else */
+/* OBSOLETE 			{ */
+/* OBSOLETE 				/* First match, save it *x/ */
+/* OBSOLETE 				bestmask = mask; */
+/* OBSOLETE 				bestlen = len; */
+/* OBSOLETE 				best = test; */
+/* OBSOLETE 				index = i; */
+/* OBSOLETE 			} */
+/* OBSOLETE 		} */
+/* OBSOLETE 	} */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Handle undefined instructions.  *x/ */
+/* OBSOLETE 	if (index < 0) */
+/* OBSOLETE 	{ */
+/* OBSOLETE 		fprintf (stream, "undefined   0%o",(buffer[0]<<8)+buffer[1]); */
+/* OBSOLETE 		return 2; */
+/* OBSOLETE 	} */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Print instruction name *x/ */
+/* OBSOLETE 	fprintf (stream, "%-12s", gld_opcodes[index].name); */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Adjust if short instruction *x/ */
+/* OBSOLETE 	if (gld_opcodes[index].length < 4) */
+/* OBSOLETE 	{ */
+/* OBSOLETE 		best >>= 16; */
+/* OBSOLETE 		i = 0; */
+/* OBSOLETE 	} */
+/* OBSOLETE 	else */
+/* OBSOLETE 	{ */
+/* OBSOLETE 		i = 16; */
+/* OBSOLETE 	} */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Dump out instruction arguments *x/ */
+/* OBSOLETE   	for (d = gld_opcodes[index].args; *d; ++d) */
+/* OBSOLETE 	{ */
+/* OBSOLETE 	    switch (*d) */
+/* OBSOLETE 	    { */
+/* OBSOLETE 		case 'f': */
+/* OBSOLETE 		    fprintf (stream, "%d",  (best >> (7 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'r': */
+/* OBSOLETE 		    fprintf (stream, "r%d", (best >> (7 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'R': */
+/* OBSOLETE 		    fprintf (stream, "r%d", (best >> (4 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'b': */
+/* OBSOLETE 		    fprintf (stream, "b%d", (best >> (7 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'B': */
+/* OBSOLETE 		    fprintf (stream, "b%d", (best >> (4 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'v': */
+/* OBSOLETE 		    fprintf (stream, "b%d", (best >> (7 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'V': */
+/* OBSOLETE 		    fprintf (stream, "b%d", (best >> (4 + i)) & 7); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'X': */
+/* OBSOLETE 		    temp = (best >> 20) & 7; */
+/* OBSOLETE 		    if (temp) */
+/* OBSOLETE 			fprintf (stream, "r%d", temp); */
+/* OBSOLETE 		    else */
+/* OBSOLETE 			putc ('0', stream); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'A': */
+/* OBSOLETE 		    temp = (best >> 16) & 7; */
+/* OBSOLETE 		    if (temp) */
+/* OBSOLETE 			fprintf (stream, "(b%d)", temp); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'S': */
+/* OBSOLETE 		    fprintf (stream, "#%d", best & 0x1f); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'I': */
+/* OBSOLETE 		    fprintf (stream, "#%x", best & 0xffff); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'O': */
+/* OBSOLETE 		    fprintf (stream, "%x", best & 0xffff); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'h': */
+/* OBSOLETE 		    fprintf (stream, "%d", best & 0xfffe); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'd': */
+/* OBSOLETE 		    fprintf (stream, "%d", best & 0xfffc); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'T': */
+/* OBSOLETE 		    fprintf (stream, "%d", (best >> 8) & 0xff); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		case 'N': */
+/* OBSOLETE 		    fprintf (stream, "%d", best & 0xff); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 		default: */
+/* OBSOLETE 		    putc (*d, stream); */
+/* OBSOLETE 		    break; */
+/* OBSOLETE 	    } */
+/* OBSOLETE 	} */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Return length of instruction *x/ */
+/* OBSOLETE   	return (gld_opcodes[index].length); */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* */
+/* OBSOLETE  * Find the number of arguments to a function. */
+/* OBSOLETE  *x/ */
+/* OBSOLETE findarg(frame) */
+/* OBSOLETE 	struct frame_info *frame; */
+/* OBSOLETE { */
+/* OBSOLETE 	register struct symbol *func; */
+/* OBSOLETE 	register unsigned pc; */
+/* OBSOLETE  */
+/* OBSOLETE #ifdef notdef */
+/* OBSOLETE 	/* find starting address of frame function *x/ */
+/* OBSOLETE 	pc = get_pc_function_start (frame->pc); */
+/* OBSOLETE  */
+/* OBSOLETE 	/* find function symbol info *x/ */
+/* OBSOLETE 	func = find_pc_function (pc); */
+/* OBSOLETE  */
+/* OBSOLETE 	/* call blockframe code to look for match *x/ */
+/* OBSOLETE 	if (func != NULL) */
+/* OBSOLETE                 return (func->value.block->nsyms / sizeof(int)); */
+/* OBSOLETE #endif */
+/* OBSOLETE  */
+/* OBSOLETE         return (-1); */
+/* OBSOLETE }  */
+/* OBSOLETE  */
+/* OBSOLETE /* */
+/* OBSOLETE  * In the case of the NPL, the frame's norminal address is Br2 and the  */
+/* OBSOLETE  * previous routines frame is up the stack X bytes.  Finding out what */
+/* OBSOLETE  * 'X' is can be tricky. */
+/* OBSOLETE  * */
+/* OBSOLETE  *    1.) stored in the code function header xA(Br1). */
+/* OBSOLETE  *    2.) must be careful of recurssion. */
+/* OBSOLETE  *x/ */
+/* OBSOLETE CORE_ADDR */
+/* OBSOLETE findframe(thisframe) */
+/* OBSOLETE     struct frame_info *thisframe; */
+/* OBSOLETE { */
+/* OBSOLETE     register CORE_ADDR pointer; */
+/* OBSOLETE     CORE_ADDR framechain(); */
+/* OBSOLETE #if 0     */
+/* OBSOLETE     struct frame_info *frame; */
+/* OBSOLETE  */
+/* OBSOLETE     /* Setup toplevel frame structure *x/ */
+/* OBSOLETE     frame->pc = read_pc(); */
+/* OBSOLETE     frame->next_frame = 0; */
+/* OBSOLETE     frame->frame = read_register (SP_REGNUM);	/* Br2 *x/ */
+/* OBSOLETE  */
+/* OBSOLETE     /* Search for this frame (start at current Br2) *x/ */
+/* OBSOLETE     do */
+/* OBSOLETE     { */
+/* OBSOLETE 	pointer = framechain(frame); */
+/* OBSOLETE 	frame->next_frame = frame->frame; */
+/* OBSOLETE 	frame->frame = pointer; */
+/* OBSOLETE 	frame->pc = FRAME_SAVED_PC(frame); */
+/* OBSOLETE     } */
+/* OBSOLETE     while (frame->next_frame != thisframe); */
+/* OBSOLETE #endif */
+/* OBSOLETE  */
+/* OBSOLETE     pointer = framechain (thisframe); */
+/* OBSOLETE  */
+/* OBSOLETE     /* stop gap for now, end at __base3 *x/ */
+/* OBSOLETE     if (thisframe->pc == 0) */
+/* OBSOLETE 	return 0; */
+/* OBSOLETE  */
+/* OBSOLETE     return pointer; */
+/* OBSOLETE } */
+/* OBSOLETE  */
+/* OBSOLETE /* */
+/* OBSOLETE  * Gdb front-end and internal framechain routine. */
+/* OBSOLETE  * Go back up stack one level.  Tricky... */
+/* OBSOLETE  *x/ */
+/* OBSOLETE CORE_ADDR */
+/* OBSOLETE framechain(frame) */
+/* OBSOLETE     register struct frame_info *frame; */
+/* OBSOLETE { */
+/* OBSOLETE     register CORE_ADDR func, prevsp; */
+/* OBSOLETE     register unsigned value; */
+/* OBSOLETE  */
+/* OBSOLETE     /* Get real function start address from internal frame address *x/ */
+/* OBSOLETE     func = get_pc_function_start(frame->pc); */
+/* OBSOLETE  */
+/* OBSOLETE     /* If no stack given, read register Br1 "(sp)" *x/ */
+/* OBSOLETE     if (!frame->frame) */
+/* OBSOLETE 	prevsp = read_register (SP_REGNUM); */
+/* OBSOLETE     else */
+/* OBSOLETE 	prevsp = frame->frame; */
+/* OBSOLETE  */
+/* OBSOLETE     /* Check function header, case #2 *x/ */
+/* OBSOLETE     value = read_memory_integer (func, 4); */
+/* OBSOLETE     if (value) */
+/* OBSOLETE     { */
+/* OBSOLETE 	/* 32bit call push value stored in function header *x/ */
+/* OBSOLETE 	prevsp += value; */
+/* OBSOLETE     } */
+/* OBSOLETE     else */
+/* OBSOLETE     { */
+/* OBSOLETE 	/* read half-word from suabr at start of function *x/ */
+/* OBSOLETE 	prevsp += read_memory_integer (func + 10, 2); */
+/* OBSOLETE     } */
+/* OBSOLETE  */
+/* OBSOLETE     return (prevsp); */
+/* OBSOLETE } */
diff --git a/gdb/gould-xdep.c b/gdb/gould-xdep.c
new file mode 100644
index 0000000..904758f
--- /dev/null
+++ b/gdb/gould-xdep.c
@@ -0,0 +1,130 @@
+/* OBSOLETE /* Low level interface to ptrace, for GDB when running under Unix. */
+/* OBSOLETE    Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc. */
+/* OBSOLETE  */
+/* OBSOLETE This file is part of GDB. */
+/* OBSOLETE  */
+/* OBSOLETE This program is free software; you can redistribute it and/or modify */
+/* OBSOLETE it under the terms of the GNU General Public License as published by */
+/* OBSOLETE the Free Software Foundation; either version 2 of the License, or */
+/* OBSOLETE (at your option) any later version. */
+/* OBSOLETE  */
+/* OBSOLETE This program is distributed in the hope that it will be useful, */
+/* OBSOLETE but WITHOUT ANY WARRANTY; without even the implied warranty of */
+/* OBSOLETE MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the */
+/* OBSOLETE GNU General Public License for more details. */
+/* OBSOLETE  */
+/* OBSOLETE You should have received a copy of the GNU General Public License */
+/* OBSOLETE along with this program; if not, write to the Free Software */
+/* OBSOLETE Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE #include "defs.h" */
+/* OBSOLETE #include "frame.h" */
+/* OBSOLETE #include "inferior.h" */
+/* OBSOLETE  */
+/* OBSOLETE #include <sys/param.h> */
+/* OBSOLETE #include <sys/dir.h> */
+/* OBSOLETE #include <signal.h> */
+/* OBSOLETE #include <sys/user.h> */
+/* OBSOLETE #include <sys/ioctl.h> */
+/* OBSOLETE #include <fcntl.h> */
+/* OBSOLETE  */
+/* OBSOLETE #include "gdbcore.h" */
+/* OBSOLETE  */
+/* OBSOLETE #include <sys/file.h> */
+/* OBSOLETE #include "gdb_stat.h" */
+/* OBSOLETE  */
+/* OBSOLETE  */
+/* OBSOLETE /* Work with core dump and executable files, for GDB.  */
+/* OBSOLETE    This code would be in corefile.c if it weren't machine-dependent. *x/ */
+/* OBSOLETE  */
+/* OBSOLETE void */
+/* OBSOLETE core_file_command (filename, from_tty) */
+/* OBSOLETE      char *filename; */
+/* OBSOLETE      int from_tty; */
+/* OBSOLETE { */
+/* OBSOLETE   int val; */
+/* OBSOLETE   extern char registers[]; */
+/* OBSOLETE  */
+/* OBSOLETE   /* Discard all vestiges of any previous core file */
+/* OBSOLETE      and mark data and stack spaces as empty.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE   if (corefile) */
+/* OBSOLETE     free (corefile); */
+/* OBSOLETE   corefile = 0; */
+/* OBSOLETE  */
+/* OBSOLETE   if (corechan >= 0) */
+/* OBSOLETE     close (corechan); */
+/* OBSOLETE   corechan = -1; */
+/* OBSOLETE  */
+/* OBSOLETE   data_start = 0; */
+/* OBSOLETE   data_end = 0; */
+/* OBSOLETE   stack_start = STACK_END_ADDR; */
+/* OBSOLETE   stack_end = STACK_END_ADDR; */
+/* OBSOLETE  */
+/* OBSOLETE   /* Now, if a new core file was specified, open it and digest it.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE   if (filename) */
+/* OBSOLETE     { */
+/* OBSOLETE       filename = tilde_expand (filename); */
+/* OBSOLETE       make_cleanup (free, filename); */
+/* OBSOLETE        */
+/* OBSOLETE       if (have_inferior_p ()) */
+/* OBSOLETE 	error ("To look at a core file, you must kill the program with \"kill\"."); */
+/* OBSOLETE       corechan = open (filename, O_RDONLY, 0); */
+/* OBSOLETE       if (corechan < 0) */
+/* OBSOLETE 	perror_with_name (filename); */
+/* OBSOLETE       /* 4.2-style (and perhaps also sysV-style) core dump file.  *x/ */
+/* OBSOLETE       { */
+/* OBSOLETE 	struct user u; */
+/* OBSOLETE 	int reg_offset; */
+/* OBSOLETE  */
+/* OBSOLETE 	val = myread (corechan, &u, sizeof u); */
+/* OBSOLETE 	if (val < 0) */
+/* OBSOLETE 	  perror_with_name (filename); */
+/* OBSOLETE 	data_start = exec_data_start; */
+/* OBSOLETE  */
+/* OBSOLETE 	data_end = data_start + NBPG * u.u_dsize; */
+/* OBSOLETE 	stack_start = stack_end - NBPG * u.u_ssize; */
+/* OBSOLETE 	data_offset = NBPG * UPAGES; */
+/* OBSOLETE 	stack_offset = NBPG * (UPAGES + u.u_dsize); */
+/* OBSOLETE 	reg_offset = (int) u.u_ar0 - KERNEL_U_ADDR; */
+/* OBSOLETE  */
+/* OBSOLETE 	/* I don't know where to find this info. */
+/* OBSOLETE 	   So, for now, mark it as not available.  *x/ */
+/* OBSOLETE 	core_aouthdr.a_magic = 0; */
+/* OBSOLETE  */
+/* OBSOLETE 	/* Read the register values out of the core file and store */
+/* OBSOLETE 	   them where `read_register' will find them.  *x/ */
+/* OBSOLETE  */
+/* OBSOLETE 	{ */
+/* OBSOLETE 	  register int regno; */
+/* OBSOLETE  */
+/* OBSOLETE 	  for (regno = 0; regno < NUM_REGS; regno++) */
+/* OBSOLETE 	    { */
+/* OBSOLETE 	      char buf[MAX_REGISTER_RAW_SIZE]; */
+/* OBSOLETE  */
+/* OBSOLETE 	      val = lseek (corechan, register_addr (regno, reg_offset), 0); */
+/* OBSOLETE 	      if (val < 0) */
+/* OBSOLETE 		perror_with_name (filename); */
+/* OBSOLETE  */
+/* OBSOLETE  	      val = myread (corechan, buf, sizeof buf); */
+/* OBSOLETE 	      if (val < 0) */
+/* OBSOLETE 		perror_with_name (filename); */
+/* OBSOLETE 	      supply_register (regno, buf); */
+/* OBSOLETE 	    } */
+/* OBSOLETE 	} */
+/* OBSOLETE       } */
+/* OBSOLETE       if (filename[0] == '/') */
+/* OBSOLETE 	corefile = savestring (filename, strlen (filename)); */
+/* OBSOLETE       else */
+/* OBSOLETE 	{ */
+/* OBSOLETE 	  corefile = concat (current_directory, "/", filename, NULL); */
+/* OBSOLETE 	} */
+/* OBSOLETE  */
+/* OBSOLETE       flush_cached_frames (); */
+/* OBSOLETE       select_frame (get_current_frame (), 0); */
+/* OBSOLETE       validate_files (); */
+/* OBSOLETE     } */
+/* OBSOLETE   else if (from_tty) */
+/* OBSOLETE     printf ("No core file now.\n"); */
+/* OBSOLETE } */
diff --git a/gdb/h8300-tdep.c b/gdb/h8300-tdep.c
new file mode 100644
index 0000000..3fbe9e1
--- /dev/null
+++ b/gdb/h8300-tdep.c
@@ -0,0 +1,921 @@
+/* Target-machine dependent code for Hitachi H8/300, for GDB.
+   Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ Contributed by Steve Chamberlain
+                sac@cygnus.com
+ */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "dis-asm.h"
+#include "gdbcmd.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include "value.h"
+
+extern int h8300hmode, h8300smode;
+
+#undef NUM_REGS
+#define NUM_REGS 11
+
+#define UNSIGNED_SHORT(X) ((X) & 0xffff)
+
+#define IS_PUSH(x) ((x & 0xfff0)==0x6df0)
+#define IS_PUSH_FP(x) (x == 0x6df6)
+#define IS_MOVE_FP(x) (x == 0x0d76 || x == 0x0ff6)
+#define IS_MOV_SP_FP(x) (x == 0x0d76 || x == 0x0ff6)
+#define IS_SUB2_SP(x) (x==0x1b87)
+#define IS_SUB4_SP(x) (x==0x1b97)
+#define IS_SUBL_SP(x) (x==0x7a37)
+#define IS_MOVK_R5(x) (x==0x7905)
+#define IS_SUB_R5SP(x) (x==0x1957)
+
+
+/* The register names change depending on whether the h8300h processor
+   type is selected. */
+
+static char *original_register_names[] = REGISTER_NAMES;
+
+static char *h8300h_register_names[] =
+  {"er0", "er1", "er2", "er3", "er4", "er5", "er6",
+    "sp", "ccr","pc","cycles","tick","inst" };
+
+char **h8300_register_names = original_register_names;
+
+
+/* Local function declarations.  */
+
+static CORE_ADDR examine_prologue ();
+static void set_machine_hook PARAMS ((char *filename));
+
+void h8300_frame_find_saved_regs ();
+
+CORE_ADDR 
+h8300_skip_prologue (start_pc)
+     CORE_ADDR start_pc;
+{
+  short int w;
+  int adjust = 0;
+
+  /* Skip past all push and stm insns.  */
+  while (1)
+    {
+      w = read_memory_unsigned_integer (start_pc, 2);
+      /* First look for push insns.  */
+      if (w == 0x0100 || w == 0x0110 || w == 0x0120 || w == 0x0130)
+	{
+	  w = read_memory_unsigned_integer (start_pc + 2, 2);
+	  adjust = 2;
+	}
+
+      if (IS_PUSH (w))
+	{
+	  start_pc += 2 + adjust;
+	  w = read_memory_unsigned_integer (start_pc, 2);
+	  continue;
+	}
+      adjust = 0;
+      break;
+    }
+
+  /* Skip past a move to FP, either word or long sized */
+  w = read_memory_unsigned_integer (start_pc, 2);
+  if (w == 0x0100)
+    {
+      w = read_memory_unsigned_integer (start_pc + 2, 2);
+      adjust += 2;
+    }
+
+  if (IS_MOVE_FP (w))
+    {
+      start_pc += 2 + adjust;
+      w = read_memory_unsigned_integer (start_pc, 2);
+    }
+
+  /* Check for loading either a word constant into r5;
+     long versions are handled by the SUBL_SP below.  */
+  if (IS_MOVK_R5 (w))
+    {
+      start_pc += 2;
+      w = read_memory_unsigned_integer (start_pc, 2);
+    }
+
+  /* Now check for subtracting r5 from sp, word sized only.  */
+  if (IS_SUB_R5SP (w))
+    {
+      start_pc += 2 + adjust;
+      w = read_memory_unsigned_integer (start_pc, 2);
+    }
+
+  /* Check for subs #2 and subs #4. */
+  while (IS_SUB2_SP (w) || IS_SUB4_SP (w))
+    {
+      start_pc += 2 + adjust;
+      w = read_memory_unsigned_integer (start_pc, 2);
+    }
+
+  /* Check for a 32bit subtract.  */
+  if (IS_SUBL_SP (w))
+    start_pc += 6 + adjust;
+
+  return start_pc;
+}
+
+int
+gdb_print_insn_h8300 (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  if (h8300smode)
+    return print_insn_h8300s (memaddr, info);
+  else if (h8300hmode)
+    return print_insn_h8300h (memaddr, info);
+  else
+    return print_insn_h8300 (memaddr, info);
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+   For us, the frame address is its stack pointer value, so we look up
+   the function prologue to determine the caller's sp value, and return it.  */
+
+CORE_ADDR
+h8300_frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+  if (PC_IN_CALL_DUMMY(thisframe->pc, thisframe->frame, thisframe->frame))
+    { /* initialize the from_pc now */
+      thisframe->from_pc = generic_read_register_dummy (thisframe->pc,
+							thisframe->frame, 
+							PC_REGNUM);
+      return thisframe->frame;
+    }
+  h8300_frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
+  return thisframe->fsr->regs[SP_REGNUM];
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   We cache the result of doing this in the frame_obstack, since it is
+   fairly expensive.  */
+
+void
+h8300_frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  register struct frame_saved_regs *cache_fsr;
+  CORE_ADDR ip;
+  struct symtab_and_line sal;
+  CORE_ADDR limit;
+
+  if (!fi->fsr)
+    {
+      cache_fsr = (struct frame_saved_regs *)
+	frame_obstack_alloc (sizeof (struct frame_saved_regs));
+      memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+
+      fi->fsr = cache_fsr;
+
+      if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+	{	/* no more to do. */
+	  if (fsr)
+	    *fsr = *fi->fsr;
+	  return;
+	}
+      /* Find the start and end of the function prologue.  If the PC
+	 is in the function prologue, we only consider the part that
+	 has executed already.  */
+
+      ip = get_pc_function_start (fi->pc);
+      sal = find_pc_line (ip, 0);
+      limit = (sal.end && sal.end < fi->pc) ? sal.end : fi->pc;
+
+      /* This will fill in fields in *fi as well as in cache_fsr.  */
+      examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+    }
+
+  if (fsr)
+    *fsr = *fi->fsr;
+}
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+   is not the address of a valid instruction, the address of the next
+   instruction beyond ADDR otherwise.  *PWORD1 receives the first word
+   of the instruction.*/
+
+CORE_ADDR
+NEXT_PROLOGUE_INSN (addr, lim, pword1)
+     CORE_ADDR addr;
+     CORE_ADDR lim;
+     INSN_WORD *pword1;
+{
+  char buf[2];
+  if (addr < lim + 8)
+    {
+      read_memory (addr, buf, 2);
+      *pword1 = extract_signed_integer (buf, 2);
+
+      return addr + 2;
+    }
+  return 0;
+}
+
+/* Examine the prologue of a function.  `ip' points to the first instruction.
+   `limit' is the limit of the prologue (e.g. the addr of the first
+   linenumber, or perhaps the program counter if we're stepping through).
+   `frame_sp' is the stack pointer value in use in this frame.
+   `fsr' is a pointer to a frame_saved_regs structure into which we put
+   info about the registers saved by this frame.
+   `fi' is a struct frame_info pointer; we fill in various fields in it
+   to reflect the offsets of the arg pointer and the locals pointer.  */
+
+static CORE_ADDR
+examine_prologue (ip, limit, after_prolog_fp, fsr, fi)
+     register CORE_ADDR ip;
+     register CORE_ADDR limit;
+     CORE_ADDR after_prolog_fp;
+     struct frame_saved_regs *fsr;
+     struct frame_info *fi;
+{
+  register CORE_ADDR next_ip;
+  int r;
+  int have_fp = 0;
+  INSN_WORD insn_word;
+  /* Number of things pushed onto stack, starts at 2/4, 'cause the
+     PC is already there */
+  unsigned int reg_save_depth = h8300hmode ? 4 : 2;
+
+  unsigned int auto_depth = 0;	/* Number of bytes of autos */
+
+  char in_frame[11];		/* One for each reg */
+
+  int adjust = 0;
+
+  memset (in_frame, 1, 11);
+  for (r = 0; r < 8; r++)
+    {
+      fsr->regs[r] = 0;
+    }
+  if (after_prolog_fp == 0)
+    {
+      after_prolog_fp = read_register (SP_REGNUM);
+    }
+
+  /* If the PC isn't valid, quit now.  */
+  if (ip == 0 || ip & (h8300hmode ? ~0xffffff : ~0xffff))
+    return 0;
+
+  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+
+  if (insn_word == 0x0100)
+    {
+      insn_word = read_memory_unsigned_integer (ip + 2, 2);
+      adjust = 2;
+    }
+
+  /* Skip over any fp push instructions */
+  fsr->regs[6] = after_prolog_fp;
+  while (next_ip && IS_PUSH_FP (insn_word))
+    {
+      ip = next_ip + adjust;
+
+      in_frame[insn_word & 0x7] = reg_save_depth;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+      reg_save_depth += 2 + adjust;
+    }
+
+  /* Is this a move into the fp */
+  if (next_ip && IS_MOV_SP_FP (insn_word))
+    {
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+      have_fp = 1;
+    }
+
+  /* Skip over any stack adjustment, happens either with a number of
+     sub#2,sp or a mov #x,r5 sub r5,sp */
+
+  if (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+    {
+      while (next_ip && (IS_SUB2_SP (insn_word) || IS_SUB4_SP (insn_word)))
+	{
+	  auto_depth += IS_SUB2_SP (insn_word) ? 2 : 4;
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	}
+    }
+  else
+    {
+      if (next_ip && IS_MOVK_R5 (insn_word))
+	{
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	  auto_depth += insn_word;
+
+	  next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn_word);
+	  auto_depth += insn_word;
+	}
+      if (next_ip && IS_SUBL_SP (insn_word))
+	{
+	  ip = next_ip;
+	  auto_depth += read_memory_unsigned_integer (ip, 4);
+	  ip += 4;
+
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	}
+    }
+
+  /* Now examine the push insns to determine where everything lives
+     on the stack.  */
+  while (1)
+    {
+      adjust = 0;
+      if (!next_ip)
+	break;
+
+      if (insn_word == 0x0100)
+	{
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	  adjust = 2;
+	}
+
+      if (IS_PUSH (insn_word))
+	{
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	  fsr->regs[r] = after_prolog_fp + auto_depth;
+	  auto_depth += 2 + adjust;
+	  continue;
+	}
+
+      /* Now check for push multiple insns.  */
+      if (insn_word == 0x0110 || insn_word == 0x0120 || insn_word == 0x0130)
+	{
+	  int count = ((insn_word >> 4) & 0xf) + 1;
+	  int start, i;
+
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn_word);
+	  start = insn_word & 0x7;
+
+	  for (i = start; i <= start + count; i++)
+	    {
+	      fsr->regs[i] = after_prolog_fp + auto_depth;
+	      auto_depth += 4;
+	    }
+	}
+      break;
+    }
+
+  /* The args are always reffed based from the stack pointer */
+  fi->args_pointer = after_prolog_fp;
+  /* Locals are always reffed based from the fp */
+  fi->locals_pointer = after_prolog_fp;
+  /* The PC is at a known place */
+  fi->from_pc = read_memory_unsigned_integer (after_prolog_fp + BINWORD, BINWORD);
+
+  /* Rememeber any others too */
+  in_frame[PC_REGNUM] = 0;
+  
+  if (have_fp)
+    /* We keep the old FP in the SP spot */
+    fsr->regs[SP_REGNUM] = read_memory_unsigned_integer (fsr->regs[6], BINWORD);
+  else
+    fsr->regs[SP_REGNUM] = after_prolog_fp + auto_depth;
+
+  return (ip);
+}
+
+void
+h8300_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  fi->fsr = 0;			/* Not yet allocated */
+  fi->args_pointer = 0;		/* Unknown */
+  fi->locals_pointer = 0;	/* Unknown */
+  fi->from_pc = 0;
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    { /* anything special to do? */
+      return;
+    }
+}
+
+/* Return the saved PC from this frame.
+
+   If the frame has a memory copy of SRP_REGNUM, use that.  If not,
+   just use the register SRP_REGNUM itself.  */
+
+CORE_ADDR
+h8300_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    return generic_read_register_dummy (frame->pc, frame->frame, PC_REGNUM);
+  else
+    return frame->from_pc;
+}
+
+CORE_ADDR
+frame_locals_address (fi)
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return (CORE_ADDR) 0;	/* Not sure what else to do... */
+  if (!fi->locals_pointer)
+    {
+      struct frame_saved_regs ignore;
+
+      get_frame_saved_regs (fi, &ignore);
+
+    }
+  return fi->locals_pointer;
+}
+
+/* Return the address of the argument block for the frame
+   described by FI.  Returns 0 if the address is unknown.  */
+
+CORE_ADDR
+frame_args_address (fi)
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return (CORE_ADDR) 0;	/* Not sure what else to do... */
+  if (!fi->args_pointer)
+    {
+      struct frame_saved_regs ignore;
+
+      get_frame_saved_regs (fi, &ignore);
+
+    }
+
+  return fi->args_pointer;
+}
+
+/* Function: push_arguments
+   Setup the function arguments for calling a function in the inferior.
+
+   On the Hitachi H8/300 architecture, there are three registers (R0 to R2)
+   which are dedicated for passing function arguments.  Up to the first
+   three arguments (depending on size) may go into these registers.
+   The rest go on the stack.
+
+   Arguments that are smaller than WORDSIZE bytes will still take up a
+   whole register or a whole WORDSIZE word on the stack, and will be
+   right-justified in the register or the stack word.  This includes
+   chars and small aggregate types.  Note that WORDSIZE depends on the 
+   cpu type.
+
+   Arguments that are larger than WORDSIZE bytes will be split between
+   two or more registers as available, but will NOT be split between a
+   register and the stack.
+
+   An exceptional case exists for struct arguments (and possibly other
+   aggregates such as arrays) -- if the size is larger than WORDSIZE
+   bytes but not a multiple of WORDSIZE bytes.  In this case the
+   argument is never split between the registers and the stack, but
+   instead is copied in its entirety onto the stack, AND also copied
+   into as many registers as there is room for.  In other words, space
+   in registers permitting, two copies of the same argument are passed
+   in.  As far as I can tell, only the one on the stack is used,
+   although that may be a function of the level of compiler
+   optimization.  I suspect this is a compiler bug.  Arguments of
+   these odd sizes are left-justified within the word (as opposed to
+   arguments smaller than WORDSIZE bytes, which are right-justified).
+ 
+   If the function is to return an aggregate type such as a struct,
+   the caller must allocate space into which the callee will copy the
+   return value.  In this case, a pointer to the return value location
+   is passed into the callee in register R0, which displaces one of
+   the other arguments passed in via registers R0 to R2.  */
+
+CORE_ADDR
+h8300_push_arguments(nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     struct value **args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int stack_align, stack_alloc, stack_offset;
+  int wordsize;
+  int argreg;
+  int argnum;
+  struct type *type;
+  CORE_ADDR regval;
+  char *val;
+  char valbuf[4];
+  int len;
+
+  if (h8300hmode || h8300smode)
+    {
+      stack_align = 3;
+      wordsize    = 4;
+    }
+  else
+    {
+      stack_align = 1;
+      wordsize    = 2;
+    }
+
+  /* first force sp to a n-byte alignment */
+  sp = sp & ~stack_align;
+
+  /* Now make sure there's space on the stack */
+  for (argnum = 0, stack_alloc = 0; 
+       argnum < nargs; argnum++)
+    stack_alloc += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + stack_align) 
+		    & ~stack_align);
+  sp -= stack_alloc;	/* make room on stack for args */
+  /* we may over-allocate a little here, but that won't hurt anything */
+
+  argreg = ARG0_REGNUM; 
+  if (struct_return)	/* "struct return" pointer takes up one argreg */
+    {
+      write_register (argreg++, struct_addr);
+    }
+
+  /* Now load as many as possible of the first arguments into
+     registers, and push the rest onto the stack.  There are 3N bytes
+     in three registers available.  Loop thru args from first to last.  */
+
+  for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+    {
+      type = VALUE_TYPE (args[argnum]);
+      len = TYPE_LENGTH (type);
+      memset(valbuf, 0, sizeof(valbuf));
+      if (len < wordsize)
+	{
+	  /* the purpose of this is to right-justify the value within the word */
+	  memcpy(valbuf + (wordsize - len), 
+		 (char *) VALUE_CONTENTS (args[argnum]), len);
+	  val = valbuf;
+	}
+      else
+	val = (char *) VALUE_CONTENTS (args[argnum]);
+
+      if (len > (ARGLAST_REGNUM+1 - argreg) * REGISTER_RAW_SIZE(ARG0_REGNUM) ||
+	 (len > wordsize && (len & stack_align) != 0))
+	{ /* passed on the stack */
+	  write_memory (sp + stack_offset, val, 
+			len < wordsize ? wordsize : len);
+	  stack_offset += (len + stack_align) & ~stack_align;
+	}
+      /* NOTE WELL!!!!!  This is not an "else if" clause!!!
+	 That's because some *&^%$ things get passed on the stack
+	 AND in the registers!   */
+      if (len <= (ARGLAST_REGNUM+1 - argreg) * REGISTER_RAW_SIZE(ARG0_REGNUM))
+	while (len > 0)
+	  { /* there's room in registers */
+	    regval = extract_address (val, wordsize);
+	    write_register (argreg, regval);
+	    len -= wordsize;
+	    val += wordsize;
+	    argreg++;
+	  }
+    }
+  return sp;
+}
+
+/* Function: push_return_address
+   Setup the return address for a dummy frame, as called by
+   call_function_by_hand.  Only necessary when you are using an
+   empty CALL_DUMMY, ie. the target will not actually be executing
+   a JSR/BSR instruction.  */
+
+CORE_ADDR
+h8300_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  unsigned char buf[4];
+  int wordsize;
+
+  if (h8300hmode || h8300smode)
+    wordsize = 4;
+  else
+    wordsize = 2;
+
+  sp -= wordsize;
+  store_unsigned_integer (buf, wordsize, CALL_DUMMY_ADDRESS ());
+  write_memory (sp, buf, wordsize);
+  return sp;
+}
+
+/* Function: pop_frame
+   Restore the machine to the state it had before the current frame 
+   was created.  Usually used either by the "RETURN" command, or by
+   call_function_by_hand after the dummy_frame is finished. */
+
+void 
+h8300_pop_frame ()
+{
+  unsigned regnum;
+  struct frame_saved_regs fsr;
+  struct frame_info *frame = get_current_frame ();
+
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    {
+      generic_pop_dummy_frame();
+    }
+  else
+    {
+      get_frame_saved_regs (frame, &fsr);
+
+      for (regnum = 0; regnum < 8; regnum++)
+	{
+	  /* Don't forget SP_REGNUM is a frame_saved_regs struct is the
+	     actual value we want, not the address of the value we want.  */
+	  if (fsr.regs[regnum] && regnum != SP_REGNUM)
+	    write_register (regnum, 
+			    read_memory_integer(fsr.regs[regnum], BINWORD));
+	  else if (fsr.regs[regnum] && regnum == SP_REGNUM)
+	    write_register (regnum, frame->frame + 2 * BINWORD);
+	}
+
+      /* Don't forget the update the PC too!  */
+      write_pc (frame->from_pc);
+    }
+  flush_cached_frames ();
+}
+
+/* Function: extract_return_value
+   Figure out where in REGBUF the called function has left its return value.
+   Copy that into VALBUF.  Be sure to account for CPU type.   */
+
+void
+h8300_extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+{
+  int wordsize, len;
+
+  if (h8300smode || h8300hmode)
+    wordsize = 4;
+  else
+    wordsize = 2;
+
+  len = TYPE_LENGTH(type);
+
+  switch (len) {
+  case 1:	/* (char) */
+  case 2:	/* (short), (int) */
+    memcpy (valbuf,   regbuf + REGISTER_BYTE(0) + (wordsize - len), len);
+    break;
+  case 4:	/* (long), (float) */
+    if (h8300smode || h8300hmode)
+      {
+	memcpy (valbuf,   regbuf + REGISTER_BYTE(0), 4);
+      }
+    else
+      {
+	memcpy (valbuf,   regbuf + REGISTER_BYTE(0), 2);
+	memcpy (valbuf+2, regbuf + REGISTER_BYTE(1), 2);
+      }
+    break;
+  case 8:	/* (double) (doesn't seem to happen, which is good,
+		   because this almost certainly isn't right.  */
+    error ("I don't know how a double is returned.");
+    break;
+  }
+}
+
+/* Function: store_return_value
+   Place the appropriate value in the appropriate registers.
+   Primarily used by the RETURN command.  */
+
+void 
+h8300_store_return_value (type, valbuf)
+     struct type *type;
+     char *valbuf;
+{
+  int wordsize, len, regval;
+  
+  if (h8300hmode || h8300smode)
+    wordsize = 4;
+  else
+    wordsize = 2;
+
+  len = TYPE_LENGTH(type);
+  switch (len) {
+  case 1:	/* char */
+  case 2:	/* short, int */
+    regval = extract_address(valbuf, len);
+    write_register (0, regval);
+    break;
+  case 4:	/* long, float */
+    regval = extract_address(valbuf, len);
+    if (h8300smode || h8300hmode)
+      {
+	write_register (0, regval);
+      }
+    else
+      {
+	write_register (0, regval >> 16);
+	write_register (1, regval & 0xffff);
+      }
+    break;
+  case 8:	/* presumeably double, but doesn't seem to happen */
+    error ("I don't know how to return a double.");
+    break;
+  }
+}
+
+/* Function: get_saved_register
+   Just call the generic_get_saved_register function.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+struct cmd_list_element *setmemorylist;
+
+static void
+set_register_names ()
+{
+  if (h8300hmode != 0)
+    h8300_register_names = h8300h_register_names;
+  else
+    h8300_register_names = original_register_names;
+}
+
+static void
+h8300_command(args, from_tty)
+{
+  extern int h8300hmode;
+  h8300hmode = 0;
+  h8300smode = 0;
+  set_register_names ();
+}
+
+static void
+h8300h_command(args, from_tty)
+{
+  extern int h8300hmode;
+  h8300hmode = 1;
+  h8300smode = 0;
+  set_register_names ();
+}
+
+static void
+h8300s_command(args, from_tty)
+{
+  extern int h8300smode;
+  extern int h8300hmode;
+  h8300smode = 1;
+  h8300hmode = 1;
+  set_register_names ();
+}
+
+
+static void 
+set_machine (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set machine\" must be followed by h8300, h8300h");
+  printf_unfiltered ("or h8300s");
+  help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+}
+
+/* set_machine_hook is called as the exec file is being opened, but
+   before the symbol file is opened.  This allows us to set the
+   h8300hmode flag based on the machine type specified in the exec
+   file.  This in turn will cause subsequently defined pointer types
+   to be 16 or 32 bits as appropriate for the machine.  */
+
+static void
+set_machine_hook (filename)
+     char *filename;
+{
+  if (bfd_get_mach (exec_bfd) == bfd_mach_h8300s)
+    {
+      h8300smode = 1;
+      h8300hmode = 1;
+    }
+  else 
+    if (bfd_get_mach (exec_bfd) == bfd_mach_h8300h)
+    {
+      h8300smode = 0;
+      h8300hmode = 1;
+    }
+  else
+    {
+      h8300smode = 0;
+      h8300hmode = 0;
+    }
+  set_register_names ();
+}
+
+void
+_initialize_h8300m ()
+{
+  add_prefix_cmd ("machine", no_class, set_machine,
+		  "set the machine type", 
+		  &setmemorylist, "set machine ", 0,
+		  &setlist);
+
+  add_cmd ("h8300", class_support, h8300_command,
+	   "Set machine to be H8/300.", &setmemorylist);
+
+  add_cmd ("h8300h", class_support, h8300h_command,
+	   "Set machine to be H8/300H.", &setmemorylist);
+
+  add_cmd ("h8300s", class_support, h8300s_command,
+	   "Set machine to be H8/300S.", &setmemorylist);
+
+  /* Add a hook to set the machine type when we're loading a file. */
+
+  specify_exec_file_hook(set_machine_hook);
+}
+
+
+
+void
+print_register_hook (regno)
+{
+  if (regno == 8)
+    {
+      /* CCR register */
+      int C, Z, N, V;
+      unsigned char b[4];
+      unsigned char l;
+      read_relative_register_raw_bytes (regno, b);
+      l = b[REGISTER_VIRTUAL_SIZE(8) -1];
+      printf_unfiltered ("\t");
+      printf_unfiltered ("I-%d - ", (l & 0x80) != 0);
+      printf_unfiltered ("H-%d - ", (l & 0x20) != 0);
+      N = (l & 0x8) != 0;
+      Z = (l & 0x4) != 0;
+      V = (l & 0x2) != 0;
+      C = (l & 0x1) != 0;
+      printf_unfiltered ("N-%d ", N);
+      printf_unfiltered ("Z-%d ", Z);
+      printf_unfiltered ("V-%d ", V);
+      printf_unfiltered ("C-%d ", C);
+      if ((C | Z) == 0)
+	printf_unfiltered ("u> ");
+      if ((C | Z) == 1)
+	printf_unfiltered ("u<= ");
+      if ((C == 0))
+	printf_unfiltered ("u>= ");
+      if (C == 1)
+	printf_unfiltered ("u< ");
+      if (Z == 0)
+	printf_unfiltered ("!= ");
+      if (Z == 1)
+	printf_unfiltered ("== ");
+      if ((N ^ V) == 0)
+	printf_unfiltered (">= ");
+      if ((N ^ V) == 1)
+	printf_unfiltered ("< ");
+      if ((Z | (N ^ V)) == 0)
+	printf_unfiltered ("> ");
+      if ((Z | (N ^ V)) == 1)
+	printf_unfiltered ("<= ");
+    }
+}
+
+void
+_initialize_h8300_tdep ()
+{
+  tm_print_insn = gdb_print_insn_h8300;
+}
diff --git a/gdb/h8500-tdep.c b/gdb/h8500-tdep.c
new file mode 100644
index 0000000..49fab2d
--- /dev/null
+++ b/gdb/h8500-tdep.c
@@ -0,0 +1,653 @@
+/* Target-dependent code for Hitachi H8/500, for GDB.
+   Copyright 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ Contributed by Steve Chamberlain
+                sac@cygnus.com
+ */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "value.h"
+#include "dis-asm.h"
+#include "gdbcore.h"
+
+#define UNSIGNED_SHORT(X) ((X) & 0xffff)
+
+static int code_size = 2;
+
+static int data_size = 2;
+
+/* Shape of an H8/500 frame :
+
+   arg-n
+   ..
+   arg-2
+   arg-1
+   return address <2 or 4 bytes>
+   old fp	  <2 bytes>
+   auto-n
+   ..
+   auto-1
+   saved registers
+
+*/
+
+/* an easy to debug H8 stack frame looks like:
+0x6df6		push	r6
+0x0d76  	mov.w   r7,r6
+0x6dfn          push    reg
+0x7905 nnnn  	mov.w  #n,r5    or   0x1b87  subs #2,sp
+0x1957       	sub.w  r5,sp
+
+ */
+
+#define IS_PUSH(x) (((x) & 0xff00)==0x6d00)
+#define IS_LINK_8(x) ((x) == 0x17)
+#define IS_LINK_16(x) ((x) == 0x1f)
+#define IS_MOVE_FP(x) ((x) == 0x0d76)
+#define IS_MOV_SP_FP(x) ((x) == 0x0d76)
+#define IS_SUB2_SP(x) ((x) == 0x1b87)
+#define IS_MOVK_R5(x) ((x) == 0x7905)
+#define IS_SUB_R5SP(x) ((x) == 0x1957)
+
+#define LINK_8 0x17
+#define LINK_16 0x1f
+
+int minimum_mode = 1;
+
+CORE_ADDR
+h8500_skip_prologue (start_pc)
+     CORE_ADDR start_pc;
+{
+  short int w;
+
+  w = read_memory_integer (start_pc, 1);
+  if (w == LINK_8)
+    {
+      start_pc += 2;
+      w = read_memory_integer (start_pc, 1);
+    }
+
+  if (w == LINK_16)
+    {
+      start_pc += 3;
+      w = read_memory_integer (start_pc, 2);
+    }
+
+  return start_pc;
+}
+
+CORE_ADDR
+h8500_addr_bits_remove (addr)
+     CORE_ADDR addr;
+{
+  return ((addr) & 0xffffff);
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+   For us, the frame address is its stack pointer value, so we look up
+   the function prologue to determine the caller's sp value, and return it.  */
+
+CORE_ADDR
+h8500_frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+  if (!inside_entry_file (thisframe->pc))
+    return (read_memory_integer (FRAME_FP (thisframe), PTR_SIZE));
+  else
+    return 0;
+}
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+   is not the address of a valid instruction, the address of the next
+   instruction beyond ADDR otherwise.  *PWORD1 receives the first word
+   of the instruction.*/
+
+CORE_ADDR
+NEXT_PROLOGUE_INSN (addr, lim, pword1)
+     CORE_ADDR addr;
+     CORE_ADDR lim;
+     char *pword1;
+{
+  if (addr < lim + 8)
+    {
+      read_memory (addr, pword1, 1);
+      read_memory (addr, pword1 + 1, 1);
+      return 1;
+    }
+  return 0;
+}
+
+/* Examine the prologue of a function.  `ip' points to the first
+   instruction.  `limit' is the limit of the prologue (e.g. the addr
+   of the first linenumber, or perhaps the program counter if we're
+   stepping through).  `frame_sp' is the stack pointer value in use in
+   this frame.  `fsr' is a pointer to a frame_saved_regs structure
+   into which we put info about the registers saved by this frame.
+   `fi' is a struct frame_info pointer; we fill in various fields in
+   it to reflect the offsets of the arg pointer and the locals
+   pointer.  */
+
+/* Return the saved PC from this frame. */
+
+CORE_ADDR
+frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  return read_memory_integer (FRAME_FP (frame) + 2, PTR_SIZE);
+}
+
+void 
+h8500_pop_frame ()
+{
+  unsigned regnum;
+  struct frame_saved_regs fsr;
+  struct frame_info *frame = get_current_frame ();
+
+  get_frame_saved_regs (frame, &fsr);
+
+  for (regnum = 0; regnum < 8; regnum++)
+    {
+      if (fsr.regs[regnum])
+	write_register (regnum, read_memory_short (fsr.regs[regnum]));
+
+      flush_cached_frames ();
+    }
+}
+
+void
+print_register_hook (regno)
+     int regno;
+{
+  if (regno == CCR_REGNUM)
+    {
+      /* CCR register */
+
+      int C, Z, N, V;
+      unsigned char b[2];
+      unsigned char l;
+
+      read_relative_register_raw_bytes (regno, b);
+      l = b[1];
+      printf_unfiltered ("\t");
+      printf_unfiltered ("I-%d - ", (l & 0x80) != 0);
+      N = (l & 0x8) != 0;
+      Z = (l & 0x4) != 0;
+      V = (l & 0x2) != 0;
+      C = (l & 0x1) != 0;
+      printf_unfiltered ("N-%d ", N);
+      printf_unfiltered ("Z-%d ", Z);
+      printf_unfiltered ("V-%d ", V);
+      printf_unfiltered ("C-%d ", C);
+      if ((C | Z) == 0)
+	printf_unfiltered ("u> ");
+      if ((C | Z) == 1)
+	printf_unfiltered ("u<= ");
+      if ((C == 0))
+	printf_unfiltered ("u>= ");
+      if (C == 1)
+	printf_unfiltered ("u< ");
+      if (Z == 0)
+	printf_unfiltered ("!= ");
+      if (Z == 1)
+	printf_unfiltered ("== ");
+      if ((N ^ V) == 0)
+	printf_unfiltered (">= ");
+      if ((N ^ V) == 1)
+	printf_unfiltered ("< ");
+      if ((Z | (N ^ V)) == 0)
+	printf_unfiltered ("> ");
+      if ((Z | (N ^ V)) == 1)
+	printf_unfiltered ("<= ");
+    }
+}
+
+int
+h8500_register_size (regno)
+     int regno;
+{
+  switch (regno)
+    {
+    case SEG_C_REGNUM:
+    case SEG_D_REGNUM:
+    case SEG_E_REGNUM:
+    case SEG_T_REGNUM:
+      return 1;
+    case R0_REGNUM:
+    case R1_REGNUM:
+    case R2_REGNUM:
+    case R3_REGNUM:
+    case R4_REGNUM:
+    case R5_REGNUM:
+    case R6_REGNUM:
+    case R7_REGNUM:
+    case CCR_REGNUM:
+      return 2;
+
+    case PR0_REGNUM:
+    case PR1_REGNUM:
+    case PR2_REGNUM:
+    case PR3_REGNUM:
+    case PR4_REGNUM:
+    case PR5_REGNUM:
+    case PR6_REGNUM:
+    case PR7_REGNUM:
+    case PC_REGNUM:
+      return 4;
+    default:
+      abort ();
+    }
+}
+
+struct type *
+h8500_register_virtual_type (regno)
+     int regno;
+{
+  switch (regno)
+    {
+    case SEG_C_REGNUM:
+    case SEG_E_REGNUM:
+    case SEG_D_REGNUM:
+    case SEG_T_REGNUM:
+      return builtin_type_unsigned_char;
+    case R0_REGNUM:
+    case R1_REGNUM:
+    case R2_REGNUM:
+    case R3_REGNUM:
+    case R4_REGNUM:
+    case R5_REGNUM:
+    case R6_REGNUM:
+    case R7_REGNUM:
+    case CCR_REGNUM:
+      return builtin_type_unsigned_short;
+    case PR0_REGNUM:
+    case PR1_REGNUM:
+    case PR2_REGNUM:
+    case PR3_REGNUM:
+    case PR4_REGNUM:
+    case PR5_REGNUM:
+    case PR6_REGNUM:
+    case PR7_REGNUM:
+    case PC_REGNUM:
+      return builtin_type_unsigned_long;
+    default:
+      abort ();
+    }
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+void
+frame_find_saved_regs (frame_info, frame_saved_regs)
+     struct frame_info *frame_info;
+     struct frame_saved_regs *frame_saved_regs;
+{
+  register int regnum;
+  register int regmask;
+  register CORE_ADDR next_addr;
+  register CORE_ADDR pc;
+  unsigned char thebyte;
+
+  memset (frame_saved_regs, '\0', sizeof *frame_saved_regs);
+
+  if ((frame_info)->pc >= (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4
+      && (frame_info)->pc <= (frame_info)->frame)
+    {
+      next_addr = (frame_info)->frame;
+      pc = (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM * 4 - 4;
+    }
+  else
+    {
+      pc = get_pc_function_start ((frame_info)->pc);
+      /* Verify we have a link a6 instruction next;
+	 if not we lose.  If we win, find the address above the saved
+	 regs using the amount of storage from the link instruction.
+	 */
+
+      thebyte = read_memory_integer (pc, 1);
+      if (0x1f == thebyte)
+	next_addr = (frame_info)->frame + read_memory_integer (pc += 1, 2), pc += 2;
+      else if (0x17 == thebyte)
+	next_addr = (frame_info)->frame + read_memory_integer (pc += 1, 1), pc += 1;
+      else
+	goto lose;
+#if 0
+      /* FIXME steve */
+      /* If have an add:g.waddal #-n, sp next, adjust next_addr.  */
+      if ((0x0c0177777 & read_memory_integer (pc, 2)) == 0157774)
+	next_addr += read_memory_integer (pc += 2, 4), pc += 4;
+#endif
+    }
+
+  thebyte = read_memory_integer (pc, 1);
+  if (thebyte == 0x12)
+    {
+      /* Got stm */
+      pc++;
+      regmask = read_memory_integer (pc, 1);
+      pc++;
+      for (regnum = 0; regnum < 8; regnum++, regmask >>= 1)
+	{
+	  if (regmask & 1)
+	    {
+	      (frame_saved_regs)->regs[regnum] = (next_addr += 2) - 2;
+	    }
+	}
+      thebyte = read_memory_integer (pc, 1);
+    }
+  /* Maybe got a load of pushes */
+  while (thebyte == 0xbf)
+    {
+      pc++;
+      regnum = read_memory_integer (pc, 1) & 0x7;
+      pc++;
+      (frame_saved_regs)->regs[regnum] = (next_addr += 2) - 2;
+      thebyte = read_memory_integer (pc, 1);
+    }
+
+lose:;
+
+  /* Remember the address of the frame pointer */
+  (frame_saved_regs)->regs[FP_REGNUM] = (frame_info)->frame;
+
+  /* This is where the old sp is hidden */
+  (frame_saved_regs)->regs[SP_REGNUM] = (frame_info)->frame;
+
+  /* And the PC - remember the pushed FP is always two bytes long */
+  (frame_saved_regs)->regs[PC_REGNUM] = (frame_info)->frame + 2;
+}
+
+CORE_ADDR
+saved_pc_after_call ()
+{
+  int x;
+  int a = read_register (SP_REGNUM);
+
+  x = read_memory_integer (a, code_size);
+  if (code_size == 2)
+    {
+      /* Stick current code segement onto top */
+      x &= 0xffff;
+      x |= read_register (SEG_C_REGNUM) << 16;
+    }
+  x &= 0xffffff;
+  return x;
+}
+
+void
+h8500_set_pointer_size (newsize)
+     int newsize;
+{
+  static int oldsize = 0;
+
+  if (oldsize != newsize)
+    {
+      printf_unfiltered ("pointer size set to %d bits\n", newsize);
+      oldsize = newsize;
+      if (newsize == 32)
+	{
+	  minimum_mode = 0;
+	}
+      else
+	{
+	  minimum_mode = 1;
+	}
+      _initialize_gdbtypes ();
+    }
+}
+
+static void
+big_command ()
+{
+  h8500_set_pointer_size (32);
+  code_size = 4;
+  data_size = 4;
+}
+
+static void
+medium_command ()
+{
+  h8500_set_pointer_size (32);
+  code_size = 4;
+  data_size = 2;
+}
+
+static void
+compact_command ()
+{
+  h8500_set_pointer_size (32);
+  code_size = 2;
+  data_size = 4;
+}
+
+static void
+small_command ()
+{
+  h8500_set_pointer_size (16);
+  code_size = 2;
+  data_size = 2;
+}
+
+static struct cmd_list_element *setmemorylist;
+
+static void
+set_memory (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set memory\" must be followed by the name of a memory subcommand.\n");
+  help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+}
+
+/* See if variable name is ppc or pr[0-7] */
+
+int
+h8500_is_trapped_internalvar (name)
+     char *name;
+{
+  if (name[0] != 'p')
+    return 0;
+
+  if (strcmp (name + 1, "pc") == 0)
+    return 1;
+
+  if (name[1] == 'r'
+      && name[2] >= '0'
+      && name[2] <= '7'
+      && name[3] == '\000')
+    return 1;
+  else
+    return 0;
+}
+
+value_ptr
+h8500_value_of_trapped_internalvar (var)
+     struct internalvar *var;
+{
+  LONGEST regval;
+  unsigned char regbuf[4];
+  int page_regnum, regnum;
+
+  regnum = var->name[2] == 'c' ? PC_REGNUM : var->name[2] - '0';
+
+  switch (var->name[2])
+    {
+    case 'c':
+      page_regnum = SEG_C_REGNUM;
+      break;
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+      page_regnum = SEG_D_REGNUM;
+      break;
+    case '4':
+    case '5':
+      page_regnum = SEG_E_REGNUM;
+      break;
+    case '6':
+    case '7':
+      page_regnum = SEG_T_REGNUM;
+      break;
+    }
+
+  get_saved_register (regbuf, NULL, NULL, selected_frame, page_regnum, NULL);
+  regval = regbuf[0] << 16;
+
+  get_saved_register (regbuf, NULL, NULL, selected_frame, regnum, NULL);
+  regval |= regbuf[0] << 8 | regbuf[1];	/* XXX host/target byte order */
+
+  free (var->value);		/* Free up old value */
+
+  var->value = value_from_longest (builtin_type_unsigned_long, regval);
+  release_value (var->value);	/* Unchain new value */
+
+  VALUE_LVAL (var->value) = lval_internalvar;
+  VALUE_INTERNALVAR (var->value) = var;
+  return var->value;
+}
+
+void
+h8500_set_trapped_internalvar (var, newval, bitpos, bitsize, offset)
+     struct internalvar *var;
+     int offset, bitpos, bitsize;
+     value_ptr newval;
+{
+  char *page_regnum, *regnum;
+  char expression[100];
+  unsigned new_regval;
+  struct type *type;
+  enum type_code newval_type_code;
+
+  type = check_typedef (VALUE_TYPE (newval));
+  newval_type_code = TYPE_CODE (type);
+
+  if ((newval_type_code != TYPE_CODE_INT
+       && newval_type_code != TYPE_CODE_PTR)
+      || TYPE_LENGTH (type) != sizeof (new_regval))
+    error ("Illegal type (%s) for assignment to $%s\n",
+	   TYPE_NAME (VALUE_TYPE (newval)), var->name);
+
+  new_regval = *(long *) VALUE_CONTENTS_RAW (newval);
+
+  regnum = var->name + 1;
+
+  switch (var->name[2])
+    {
+    case 'c':
+      page_regnum = "cp";
+      break;
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+      page_regnum = "dp";
+      break;
+    case '4':
+    case '5':
+      page_regnum = "ep";
+      break;
+    case '6':
+    case '7':
+      page_regnum = "tp";
+      break;
+    }
+
+  sprintf (expression, "$%s=%d", page_regnum, new_regval >> 16);
+  parse_and_eval (expression);
+
+  sprintf (expression, "$%s=%d", regnum, new_regval & 0xffff);
+  parse_and_eval (expression);
+}
+
+CORE_ADDR
+h8500_read_sp ()
+{
+  return read_register (PR7_REGNUM);
+}
+
+void
+h8500_write_sp (v)
+     CORE_ADDR v;
+{
+  write_register (PR7_REGNUM, v);
+}
+
+CORE_ADDR
+h8500_read_pc (pid)
+     int pid;
+{
+  return read_register (PC_REGNUM);
+}
+
+void
+h8500_write_pc (v, pid)
+     CORE_ADDR v;
+     int pid;
+{
+  write_register (PC_REGNUM, v);
+}
+
+CORE_ADDR
+h8500_read_fp ()
+{
+  return read_register (PR6_REGNUM);
+}
+
+void
+h8500_write_fp (v)
+     CORE_ADDR v;
+{
+  write_register (PR6_REGNUM, v);
+}
+
+void
+_initialize_h8500_tdep ()
+{
+  tm_print_insn = print_insn_h8500;
+
+  add_prefix_cmd ("memory", no_class, set_memory,
+		  "set the memory model", &setmemorylist, "set memory ", 0,
+		  &setlist);
+
+  add_cmd ("small", class_support, small_command,
+	   "Set small memory model. (16 bit code, 16 bit data)", &setmemorylist);
+
+  add_cmd ("big", class_support, big_command,
+	   "Set big memory model. (32 bit code, 32 bit data)", &setmemorylist);
+
+  add_cmd ("medium", class_support, medium_command,
+	   "Set medium memory model. (32 bit code, 16 bit data)", &setmemorylist);
+
+  add_cmd ("compact", class_support, compact_command,
+	   "Set compact memory model. (16 bit code, 32 bit data)", &setmemorylist);
+
+}
diff --git a/gdb/hp-psymtab-read.c b/gdb/hp-psymtab-read.c
new file mode 100644
index 0000000..5926ada
--- /dev/null
+++ b/gdb/hp-psymtab-read.c
@@ -0,0 +1,2381 @@
+/* Read hp debug symbols and convert to internal format, for GDB.
+   Copyright 1993, 1996, 1998, 1999 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Written by the Center for Software Science at the University of Utah
+   and by Cygnus Support.  */
+
+/* Common include file for hp_symtab_read.c and hp_psymtab_read.c.
+   This has nested includes of a bunch of stuff. */
+#include "hpread.h"
+#include "demangle.h"
+
+/* To generate dumping code, uncomment this define.  The dumping
+   itself is controlled by routine-local statics called "dumping". */
+/* #define DUMPING         1 */
+
+/* To use the quick look-up tables, uncomment this define. */
+#define QUICK_LOOK_UP      1
+
+/* To call PXDB to process un-processed files, uncomment this define. */
+#define USE_PXDB           1
+
+/* Forward procedure declarations */
+
+void hpread_symfile_init
+  PARAMS ((struct objfile *));
+
+void
+do_pxdb PARAMS ((bfd *));
+
+void hpread_build_psymtabs
+  PARAMS ((struct objfile *, struct section_offsets *, int));
+
+void hpread_symfile_finish
+  PARAMS ((struct objfile *));
+
+static union dnttentry *hpread_get_gntt
+  PARAMS ((int, struct objfile *));
+
+static unsigned long hpread_get_textlow
+  PARAMS ((int, int, struct objfile *, int));
+
+static struct partial_symtab *hpread_start_psymtab
+  PARAMS ((struct objfile *, struct section_offsets *, char *, CORE_ADDR, int,
+	   struct partial_symbol **, struct partial_symbol **));
+
+static struct partial_symtab *hpread_end_psymtab
+  PARAMS ((struct partial_symtab *, char **, int, int, CORE_ADDR,
+	   struct partial_symtab **, int));
+
+/* End of forward routine declarations */
+
+#ifdef USE_PXDB
+
+/* NOTE use of system files!  May not be portable. */
+
+#define PXDB_SVR4 "/opt/langtools/bin/pxdb"
+#define PXDB_BSD  "/usr/bin/pxdb"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+/* check for the existance of a file, given its full pathname */
+int
+file_exists (filename)
+     char *filename;
+{
+  if (filename)
+    return (access (filename, F_OK) == 0);
+  return 0;
+}
+
+
+/* Translate from the "hp_language" enumeration in hp-symtab.h
+   used in the debug info to gdb's generic enumeration in defs.h. */
+static enum language
+trans_lang (in_lang)
+     enum hp_language in_lang;
+{
+  if (in_lang == HP_LANGUAGE_C)
+    return language_c;
+
+  else if (in_lang == HP_LANGUAGE_CPLUSPLUS)
+    return language_cplus;
+
+  else if (in_lang == HP_LANGUAGE_F77)
+    return language_fortran;
+
+  else
+    return language_unknown;
+}
+
+static char main_string[] = "main";
+
+/* Call PXDB to process our file.
+
+   Approach copied from DDE's "dbgk_run_pxdb".  Note: we
+   don't check for BSD location of pxdb, nor for existance
+   of pxdb itself, etc.
+
+   NOTE: uses system function and string functions directly.
+
+   Return value: 1 if ok, 0 if not */
+int
+hpread_call_pxdb (file_name)
+     char *file_name;
+{
+  char *p;
+  int status;
+  int retval;
+
+  if (file_exists (PXDB_SVR4))
+    {
+      p = malloc (strlen (PXDB_SVR4) + strlen (file_name) + 2);
+      strcpy (p, PXDB_SVR4);
+      strcat (p, " ");
+      strcat (p, file_name);
+
+      warning ("File not processed by pxdb--about to process now.\n");
+      status = system (p);
+
+      retval = (status == 0);
+    }
+  else
+    {
+      warning ("pxdb not found at standard location: /opt/langtools/bin\ngdb will not be able to debug %s.\nPlease install pxdb at the above location and then restart gdb.\nYou can also run pxdb on %s with the command\n\"pxdb %s\" and then restart gdb.", file_name, file_name, file_name);
+
+      retval = 0;
+    }
+  return retval;
+}				/* hpread_call_pxdb */
+
+
+/* Return 1 if the file turns out to need pre-processing
+   by PXDB, and we have thus called PXDB to do this processing
+   and the file therefore needs to be re-loaded.  Otherwise
+   return 0. */
+int
+hpread_pxdb_needed (sym_bfd)
+     bfd *sym_bfd;
+{
+  asection *pinfo_section, *debug_section, *header_section;
+  unsigned int do_pxdb;
+  char *buf;
+  bfd_size_type header_section_size;
+
+  unsigned long tmp;
+  unsigned int pxdbed;
+
+  header_section = bfd_get_section_by_name (sym_bfd, "$HEADER$");
+  if (!header_section)
+    {
+      return 0;			/* No header at all, can't recover... */
+    }
+
+  debug_section = bfd_get_section_by_name (sym_bfd, "$DEBUG$");
+  pinfo_section = bfd_get_section_by_name (sym_bfd, "$PINFO$");
+
+  if (pinfo_section && !debug_section)
+    {
+      /* Debug info with DOC, has different header format. 
+         this only happens if the file was pxdbed and compiled optimized
+         otherwise the PINFO section is not there. */
+      header_section_size = bfd_section_size (objfile->obfd, header_section);
+
+      if (header_section_size == (bfd_size_type) sizeof (DOC_info_PXDB_header))
+	{
+	  buf = alloca (sizeof (DOC_info_PXDB_header));
+
+	  if (!bfd_get_section_contents (sym_bfd,
+					 header_section,
+					 buf, 0,
+					 header_section_size))
+	    error ("bfd_get_section_contents\n");
+
+	  tmp = bfd_get_32 (sym_bfd, (bfd_byte *) (buf + sizeof (int) * 4));
+	  pxdbed = (tmp >> 31) & 0x1;
+
+	  if (!pxdbed)
+	    error ("file debug header info invalid\n");
+	  do_pxdb = 0;
+	}
+
+      else
+	error ("invalid $HEADER$ size in executable \n");
+    }
+
+  else
+    {
+
+      /* this can be three different cases:
+         1. pxdbed and not doc
+         - DEBUG and HEADER sections are there
+         - header is PXDB_header type
+         - pxdbed flag is set to 1
+
+         2. not pxdbed and doc
+         - DEBUG and HEADER  sections are there
+         - header is DOC_info_header type
+         - pxdbed flag is set to 0
+
+         3. not pxdbed and not doc
+         - DEBUG and HEADER sections are there
+         - header is XDB_header type
+         - pxdbed flag is set to 0
+
+         NOTE: the pxdbed flag is meaningful also in the not
+         already pxdb processed version of the header,
+         because in case on non-already processed by pxdb files
+         that same bit in the header would be always zero.
+         Why? Because the bit is the leftmost bit of a word
+         which contains a 'length' which is always a positive value
+         so that bit is never set to 1 (otherwise it would be negative)
+
+         Given the above, we have two choices : either we ignore the
+         size of the header itself and just look at the pxdbed field,
+         or we check the size and then we (for safety and paranoia related
+         issues) check the bit.
+         The first solution is used by DDE, the second by PXDB itself.
+         I am using the second one here, because I already wrote it,
+         and it is the end of a long day.
+         Also, using the first approach would still involve size issues
+         because we need to read in the contents of the header section, and
+         give the correct amount of stuff we want to read to the
+         get_bfd_section_contents function.  */
+
+      /* decide which case depending on the size of the header section.
+         The size is as defined in hp-symtab.h  */
+
+      header_section_size = bfd_section_size (objfile->obfd, header_section);
+
+      if (header_section_size == (bfd_size_type) sizeof (PXDB_header))	/* pxdb and not doc */
+	{
+
+	  buf = alloca (sizeof (PXDB_header));
+	  if (!bfd_get_section_contents (sym_bfd,
+					 header_section,
+					 buf, 0,
+					 header_section_size))
+	    error ("bfd_get_section_contents\n");
+
+	  tmp = bfd_get_32 (sym_bfd, (bfd_byte *) (buf + sizeof (int) * 3));
+	  pxdbed = (tmp >> 31) & 0x1;
+
+	  if (pxdbed)
+	    do_pxdb = 0;
+	  else
+	    error ("file debug header invalid\n");
+	}
+      else			/*not pxdbed and doc OR not pxdbed and non doc */
+	do_pxdb = 1;
+    }
+
+  if (do_pxdb)
+    {
+      return 1;
+    }
+  else
+    {
+      return 0;
+    }
+}				/* hpread_pxdb_needed */
+
+#endif
+
+/* Check whether the file needs to be preprocessed by pxdb. 
+   If so, call pxdb. */
+
+void 
+do_pxdb (sym_bfd)
+     bfd *sym_bfd;
+{
+  /* The following code is HP-specific.  The "right" way of
+     doing this is unknown, but we bet would involve a target-
+     specific pre-file-load check using a generic mechanism. */
+
+  /* This code will not be executed if the file is not in SOM
+     format (i.e. if compiled with gcc) */
+    if (hpread_pxdb_needed (sym_bfd)) 
+      {
+	/*This file has not been pre-processed. Preprocess now */
+	  
+	if (hpread_call_pxdb (sym_bfd->filename))
+	  {
+	    /* The call above has changed the on-disk file, 
+               we can close the file anyway, because the
+	       symbols will be reread in when the target is run */
+	    bfd_close (sym_bfd); 
+	  }
+      }
+}
+
+
+
+#ifdef QUICK_LOOK_UP
+
+/* Code to handle quick lookup-tables follows. */
+
+
+/* Some useful macros */
+#define VALID_FILE(i)   ((i) < pxdb_header_p->fd_entries)
+#define VALID_MODULE(i) ((i) < pxdb_header_p->md_entries)
+#define VALID_PROC(i)   ((i) < pxdb_header_p->pd_entries)
+#define VALID_CLASS(i)  ((i) < pxdb_header_p->cd_entries)
+
+#define FILE_START(i)    (qFD[i].adrStart)
+#define MODULE_START(i) (qMD[i].adrStart)
+#define PROC_START(i)    (qPD[i].adrStart)
+
+#define FILE_END(i)   (qFD[i].adrEnd)
+#define MODULE_END(i) (qMD[i].adrEnd)
+#define PROC_END(i)   (qPD[i].adrEnd)
+
+#define FILE_ISYM(i)   (qFD[i].isym)
+#define MODULE_ISYM(i) (qMD[i].isym)
+#define PROC_ISYM(i)   (qPD[i].isym)
+
+#define VALID_CURR_FILE    (curr_fd < pxdb_header_p->fd_entries)
+#define VALID_CURR_MODULE  (curr_md < pxdb_header_p->md_entries)
+#define VALID_CURR_PROC    (curr_pd < pxdb_header_p->pd_entries)
+#define VALID_CURR_CLASS   (curr_cd < pxdb_header_p->cd_entries)
+
+#define CURR_FILE_START     (qFD[curr_fd].adrStart)
+#define CURR_MODULE_START   (qMD[curr_md].adrStart)
+#define CURR_PROC_START     (qPD[curr_pd].adrStart)
+
+#define CURR_FILE_END    (qFD[curr_fd].adrEnd)
+#define CURR_MODULE_END  (qMD[curr_md].adrEnd)
+#define CURR_PROC_END    (qPD[curr_pd].adrEnd)
+
+#define CURR_FILE_ISYM    (qFD[curr_fd].isym)
+#define CURR_MODULE_ISYM  (qMD[curr_md].isym)
+#define CURR_PROC_ISYM    (qPD[curr_pd].isym)
+
+#define TELL_OBJFILE                                      \
+            do {                                          \
+               if( !told_objfile ) {                      \
+                   told_objfile = 1;                      \
+                   warning ("\nIn object file \"%s\":\n", \
+                            objfile->name);               \
+               }                                          \
+            } while (0)
+
+
+
+/* Keeping track of the start/end symbol table (LNTT) indices of
+   psymtabs created so far */
+
+typedef struct
+  {
+    int start;
+    int end;
+  }
+pst_syms_struct;
+
+static pst_syms_struct *pst_syms_array = 0;
+
+static pst_syms_count = 0;
+static pst_syms_size = 0;
+
+/* used by the TELL_OBJFILE macro */
+static boolean told_objfile = 0;
+
+/* Set up psymtab symbol index stuff */
+static void
+init_pst_syms ()
+{
+  pst_syms_count = 0;
+  pst_syms_size = 20;
+  pst_syms_array = (pst_syms_struct *) xmalloc (20 * sizeof (pst_syms_struct));
+}
+
+/* Clean up psymtab symbol index stuff */
+static void
+clear_pst_syms ()
+{
+  pst_syms_count = 0;
+  pst_syms_size = 0;
+  free (pst_syms_array);
+  pst_syms_array = 0;
+}
+
+/* Add information about latest psymtab to symbol index table */
+static void
+record_pst_syms (start_sym, end_sym)
+     int start_sym;
+     int end_sym;
+{
+  if (++pst_syms_count > pst_syms_size)
+    {
+      pst_syms_array = (pst_syms_struct *) xrealloc (pst_syms_array,
+			      2 * pst_syms_size * sizeof (pst_syms_struct));
+      pst_syms_size *= 2;
+    }
+  pst_syms_array[pst_syms_count - 1].start = start_sym;
+  pst_syms_array[pst_syms_count - 1].end = end_sym;
+}
+
+/* Find a suitable symbol table index which can serve as the upper
+   bound of a psymtab that starts at INDEX
+
+   This scans backwards in the psymtab symbol index table to find a
+   "hole" in which the given index can fit.  This is a heuristic!!
+   We don't search the entire table to check for multiple holes,
+   we don't care about overlaps, etc. 
+
+   Return 0 => not found */
+static int
+find_next_pst_start (index)
+     int index;
+{
+  int i;
+
+  for (i = pst_syms_count - 1; i >= 0; i--)
+    if (pst_syms_array[i].end <= index)
+      return (i == pst_syms_count - 1) ? 0 : pst_syms_array[i + 1].start - 1;
+
+  if (pst_syms_array[0].start > index)
+    return pst_syms_array[0].start - 1;
+
+  return 0;
+}
+
+
+
+/* Utility functions to find the ending symbol index for a psymtab */
+
+/* Find the next file entry that begins beyond INDEX, and return
+   its starting symbol index - 1.
+   QFD is the file table, CURR_FD is the file entry from where to start,
+   PXDB_HEADER_P as in hpread_quick_traverse (to allow macros to work).
+
+   Return 0 => not found */
+static int
+find_next_file_isym (index, qFD, curr_fd, pxdb_header_p)
+     int index;
+     quick_file_entry *qFD;
+     int curr_fd;
+     PXDB_header_ptr pxdb_header_p;
+{
+  while (VALID_CURR_FILE)
+    {
+      if (CURR_FILE_ISYM >= index)
+	return CURR_FILE_ISYM - 1;
+      curr_fd++;
+    }
+  return 0;
+}
+
+/* Find the next procedure entry that begins beyond INDEX, and return
+   its starting symbol index - 1.
+   QPD is the procedure table, CURR_PD is the proc entry from where to start,
+   PXDB_HEADER_P as in hpread_quick_traverse (to allow macros to work).
+
+   Return 0 => not found */
+static int
+find_next_proc_isym (index, qPD, curr_pd, pxdb_header_p)
+     int index;
+     quick_procedure_entry *qPD;
+     int curr_pd;
+     PXDB_header_ptr pxdb_header_p;
+{
+  while (VALID_CURR_PROC)
+    {
+      if (CURR_PROC_ISYM >= index)
+	return CURR_PROC_ISYM - 1;
+      curr_pd++;
+    }
+  return 0;
+}
+
+/* Find the next module entry that begins beyond INDEX, and return
+   its starting symbol index - 1.
+   QMD is the module table, CURR_MD is the modue entry from where to start,
+   PXDB_HEADER_P as in hpread_quick_traverse (to allow macros to work).
+
+   Return 0 => not found */
+static int
+find_next_module_isym (index, qMD, curr_md, pxdb_header_p)
+     int index;
+     quick_module_entry *qMD;
+     int curr_md;
+     PXDB_header_ptr pxdb_header_p;
+{
+  while (VALID_CURR_MODULE)
+    {
+      if (CURR_MODULE_ISYM >= index)
+	return CURR_MODULE_ISYM - 1;
+      curr_md++;
+    }
+  return 0;
+}
+
+/* Scan and record partial symbols for all functions starting from index
+   pointed to by CURR_PD_P, and between code addresses START_ADR and END_ADR.
+   Other parameters are explained in comments below. */
+
+/* This used to be inline in hpread_quick_traverse, but now that we do essentially the
+   same thing for two different cases (modules and module-less files), it's better
+   organized in a separate routine, although it does take lots of arguments. pai/1997-10-08 */
+
+static int
+scan_procs (curr_pd_p, qPD, max_procs, start_adr, end_adr, pst, vt_bits, objfile, section_offsets)
+     int *curr_pd_p;		/* pointer to current proc index */
+     quick_procedure_entry *qPD;	/* the procedure quick lookup table */
+     int max_procs;		/* number of entries in proc. table */
+     CORE_ADDR start_adr;	/* beginning of code range for current psymtab */
+     CORE_ADDR end_adr;		/* end of code range for current psymtab */
+     struct partial_symtab *pst;	/* current psymtab */
+     char *vt_bits;		/* strings table of SOM debug space */
+     struct objfile *objfile;	/* current object file */
+     struct section_offsets *section_offsets;	/* not really used for HP-UX currently */
+{
+  union dnttentry *dn_bufp;
+  int symbol_count = 0;		/* Total number of symbols in this psymtab */
+  int curr_pd = *curr_pd_p;	/* Convenience variable -- avoid dereferencing pointer all the time */
+
+#ifdef DUMPING
+  /* Turn this on for lots of debugging information in this routine */
+  static int dumping = 0;
+#endif
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("Scan_procs called, addresses %x to %x, proc %x\n", start_adr, end_adr, curr_pd);
+    }
+#endif
+
+  while ((CURR_PROC_START <= end_adr) && (curr_pd < max_procs))
+    {
+
+      char *rtn_name;		/* mangled name */
+      char *rtn_dem_name;	/* qualified demangled name */
+      char *class_name;
+      int class;
+
+      if ((trans_lang ((enum hp_language) qPD[curr_pd].language) == language_cplus) &&
+	  vt_bits[(long) qPD[curr_pd].sbAlias])		/* not a null string */
+	{
+	  /* Get mangled name for the procedure, and demangle it */
+	  rtn_name = &vt_bits[(long) qPD[curr_pd].sbAlias];
+	  rtn_dem_name = cplus_demangle (rtn_name, DMGL_ANSI | DMGL_PARAMS);
+	}
+      else
+	{
+	  rtn_name = &vt_bits[(long) qPD[curr_pd].sbProc];
+	  rtn_dem_name = NULL;
+	}
+
+      /* Hack to get around HP C/C++ compilers' insistence on providing
+         "_MAIN_" as an alternate name for "main" */
+      if ((strcmp (rtn_name, "_MAIN_") == 0) &&
+	  (strcmp (&vt_bits[(long) qPD[curr_pd].sbProc], "main") == 0))
+	rtn_dem_name = rtn_name = main_string;
+
+#ifdef DUMPING
+      if (dumping)
+	{
+	  printf ("..add %s (demangled %s), index %x to this psymtab\n", rtn_name, rtn_dem_name, curr_pd);
+	}
+#endif
+
+      /* Check for module-spanning routines. */
+      if (CURR_PROC_END > end_adr)
+	{
+	  TELL_OBJFILE;
+	  warning ("Procedure \"%s\" [0x%x] spans file or module boundaries.", rtn_name, curr_pd);
+	}
+
+      /* Add this routine symbol to the list in the objfile. 
+         Unfortunately we have to go to the LNTT to determine the
+         correct list to put it on. An alternative (which the
+         code used to do) would be to not check and always throw
+         it on the "static" list. But if we go that route, then
+         symbol_lookup() needs to be tweaked a bit to account
+         for the fact that the function might not be found on
+         the correct list in the psymtab. - RT */
+      dn_bufp = hpread_get_lntt (qPD[curr_pd].isym, objfile);
+      if (dn_bufp->dfunc.global)
+	add_psymbol_with_dem_name_to_list (rtn_name,
+					   strlen (rtn_name),
+					   rtn_dem_name,
+					   strlen (rtn_dem_name),
+					   VAR_NAMESPACE,
+					   LOC_BLOCK,	/* "I am a routine"        */
+					   &objfile->global_psymbols,
+					   (qPD[curr_pd].adrStart + /* Starting address of rtn */
+					    ANOFFSET (section_offsets, SECT_OFF_TEXT)),
+					   0,	/* core addr?? */
+					   trans_lang ((enum hp_language) qPD[curr_pd].language),
+					   objfile);
+      else
+	add_psymbol_with_dem_name_to_list (rtn_name,
+					   strlen (rtn_name),
+					   rtn_dem_name,
+					   strlen (rtn_dem_name),
+					   VAR_NAMESPACE,
+					   LOC_BLOCK,	/* "I am a routine"        */
+					   &objfile->static_psymbols,
+					   (qPD[curr_pd].adrStart +  /* Starting address of rtn */
+					    ANOFFSET (section_offsets, SECT_OFF_TEXT)),
+					   0,	/* core addr?? */
+					   trans_lang ((enum hp_language) qPD[curr_pd].language),
+					   objfile);
+
+      symbol_count++;
+      *curr_pd_p = ++curr_pd;	/* bump up count & reflect in caller */
+    }				/* loop over procedures */
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      if (symbol_count == 0)
+	printf ("Scan_procs: no symbols found!\n");
+    }
+#endif
+
+  return symbol_count;
+}
+
+
+/* Traverse the quick look-up tables, building a set of psymtabs.
+
+   This constructs a psymtab for modules and files in the quick lookup
+   tables.
+
+   Mostly, modules correspond to compilation units, so we try to
+   create psymtabs that correspond to modules; however, in some cases
+   a file can result in a compiled object which does not have a module
+   entry for it, so in such cases we create a psymtab for the file.  */
+
+int
+hpread_quick_traverse (objfile,	section_offsets, gntt_bits, vt_bits, pxdb_header_p)	
+     struct objfile *objfile;        /* The object file descriptor */
+     struct section_offsets *section_offsets; /* ?? Null for HP */
+     char *gntt_bits;                /* GNTT entries, loaded in from the file */
+     char *vt_bits;                  /* VT (string) entries ditto. */
+     PXDB_header_ptr pxdb_header_p;  /* Pointer to pxdb header ditto */
+{
+  struct partial_symtab *pst;
+
+  char *addr;
+
+  quick_procedure_entry *qPD;
+  quick_file_entry *qFD;
+  quick_module_entry *qMD;
+  quick_class_entry *qCD;
+
+  int idx;
+  int i;
+  CORE_ADDR start_adr;		/* current psymtab's starting code addr   */
+  CORE_ADDR end_adr;		/* current psymtab's ending code addr     */
+  CORE_ADDR next_mod_adr;	/* next module's starting code addr    */
+  int curr_pd;			/* current procedure */
+  int curr_fd;			/* current file      */
+  int curr_md;			/* current module    */
+  int start_sym;		/* current psymtab's starting symbol index */
+  int end_sym;			/* current psymtab's ending symbol index   */
+  int max_LNTT_sym_index;
+  int syms_in_pst;
+  B_TYPE *class_entered;
+
+  struct partial_symbol **global_syms;	/* We'll be filling in the "global"   */
+  struct partial_symbol **static_syms;	/* and "static" tables in the objfile
+                                           as we go, so we need a pair of     
+                                           current pointers. */
+
+#ifdef DUMPING
+  /* Turn this on for lots of debugging information in this routine.
+     You get a blow-by-blow account of quick lookup table reading */
+  static int dumping = 0;
+#endif
+
+  pst = (struct partial_symtab *) 0;
+
+  /* Clear out some globals */
+  init_pst_syms ();
+  told_objfile = 0;
+
+  /* Demangling style -- if EDG style already set, don't change it,
+     as HP style causes some problems with the KAI EDG compiler */
+  if (current_demangling_style != edg_demangling)
+    {
+      /* Otherwise, ensure that we are using HP style demangling */
+      set_demangling_style (HP_DEMANGLING_STYLE_STRING);
+    }
+
+  /* First we need to find the starting points of the quick
+     look-up tables in the GNTT. */
+
+  addr = gntt_bits;
+
+  qPD = (quick_procedure_entry_ptr) addr;
+  addr += pxdb_header_p->pd_entries * sizeof (quick_procedure_entry);
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("\n Printing routines as we see them\n");
+      for (i = 0; VALID_PROC (i); i++)
+	{
+	  idx = (long) qPD[i].sbProc;
+	  printf ("%s %x..%x\n", &vt_bits[idx],
+		  (int) PROC_START (i),
+		  (int) PROC_END (i));
+	}
+    }
+#endif
+
+  qFD = (quick_file_entry_ptr) addr;
+  addr += pxdb_header_p->fd_entries * sizeof (quick_file_entry);
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("\n Printing files as we see them\n");
+      for (i = 0; VALID_FILE (i); i++)
+	{
+	  idx = (long) qFD[i].sbFile;
+	  printf ("%s %x..%x\n", &vt_bits[idx],
+		  (int) FILE_START (i),
+		  (int) FILE_END (i));
+	}
+    }
+#endif
+
+  qMD = (quick_module_entry_ptr) addr;
+  addr += pxdb_header_p->md_entries * sizeof (quick_module_entry);
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("\n Printing modules as we see them\n");
+      for (i = 0; i < pxdb_header_p->md_entries; i++)
+	{
+	  idx = (long) qMD[i].sbMod;
+	  printf ("%s\n", &vt_bits[idx]);
+	}
+    }
+#endif
+
+  qCD = (quick_class_entry_ptr) addr;
+  addr += pxdb_header_p->cd_entries * sizeof (quick_class_entry);
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("\n Printing classes as we see them\n");
+      for (i = 0; VALID_CLASS (i); i++)
+	{
+	  idx = (long) qCD[i].sbClass;
+	  printf ("%s\n", &vt_bits[idx]);
+	}
+
+      printf ("\n Done with dump, on to build!\n");
+    }
+#endif
+
+  /* We need this index only while hp-symtab-read.c expects
+     a byte offset to the end of the LNTT entries for a given
+     psymtab.  Thus the need for it should go away someday.
+
+     When it goes away, then we won't have any need to load the
+     LNTT from the objfile at psymtab-time, and start-up will be
+     faster.  To make that work, we'll need some way to create
+     a null pst for the "globals" pseudo-module. */
+  max_LNTT_sym_index = LNTT_SYMCOUNT (objfile);
+
+  /* Scan the module descriptors and make a psymtab for each.
+
+     We know the MDs, FDs and the PDs are in order by starting
+     address.  We use that fact to traverse all three arrays in
+     parallel, knowing when the next PD is in a new file
+     and we need to create a new psymtab. */
+  curr_pd = 0;			/* Current procedure entry */
+  curr_fd = 0;			/* Current file entry */
+  curr_md = 0;			/* Current module entry */
+
+  start_adr = 0;		/* Current psymtab code range */
+  end_adr = 0;
+
+  start_sym = 0;		/* Current psymtab symbol range */
+  end_sym = 0;
+
+  syms_in_pst = 0;		/* Symbol count for psymtab */
+
+  /* Psts actually just have pointers into the objfile's
+     symbol table, not their own symbol tables. */
+  global_syms = objfile->global_psymbols.list;
+  static_syms = objfile->static_psymbols.list;
+
+
+  /* First skip over pseudo-entries with address 0.  These represent inlined
+     routines and abstract (uninstantiated) template routines.
+     FIXME: These should be read in and available -- even if we can't set
+     breakpoints, etc., there's some information that can be presented
+     to the user. pai/1997-10-08  */
+
+  while (VALID_CURR_PROC && (CURR_PROC_START == 0))
+    curr_pd++;
+
+  /* Loop over files, modules, and procedures in code address order. Each
+     time we enter an iteration of this loop, curr_pd points to the first
+     unprocessed procedure, curr_fd points to the first unprocessed file, and
+     curr_md to the first unprocessed module.  Each iteration of this loop
+     updates these as required -- any or all of them may be bumpd up
+     each time around.  When we exit this loop, we are done with all files
+     and modules in the tables -- there may still be some procedures, however.
+
+     Note: This code used to loop only over module entries, under the assumption
+     that files can occur via inclusions and are thus unreliable, while a
+     compiled object always corresponds to a module.  With CTTI in the HP aCC
+     compiler, it turns out that compiled objects may have only files and no
+     modules; so we have to loop over files and modules, creating psymtabs for
+     either as appropriate.  Unfortunately there are some problems (notably:
+     1. the lack of "SRC_FILE_END" entries in the LNTT, 2. the lack of pointers
+     to the ending symbol indices of a module or a file) which make it quite hard
+     to do this correctly.  Currently it uses a bunch of heuristics to start and
+     end psymtabs; they seem to work well with most objects generated by aCC, but
+     who knows when that will change...   */
+
+  while (VALID_CURR_FILE || VALID_CURR_MODULE)
+    {
+
+      char *mod_name_string;
+      char *full_name_string;
+
+      /* First check for modules like "version.c", which have no code
+         in them but still have qMD entries.  They also have no qFD or
+         qPD entries.  Their start address is -1 and their end address
+         is 0.  */
+      if (VALID_CURR_MODULE && (CURR_MODULE_START == -1) && (CURR_MODULE_END == 0))
+	{
+
+	  mod_name_string = &vt_bits[(long) qMD[curr_md].sbMod];
+
+#ifdef DUMPING
+	  if (dumping)
+	    printf ("Module with data only %s\n", mod_name_string);
+#endif
+
+	  /* We'll skip the rest (it makes error-checking easier), and
+	     just make an empty pst.  Right now empty psts are not put
+	     in the pst chain, so all this is for naught, but later it
+	     might help.  */
+
+	  pst = hpread_start_psymtab (objfile,
+				      section_offsets,	        /* ?? */
+				      mod_name_string,
+				      CURR_MODULE_START,	/* Low text address: bogus! */
+				      (CURR_MODULE_ISYM * sizeof (struct dntt_type_block)),
+				                                /* ldsymoff */
+				      global_syms,
+				      static_syms);
+
+	  pst = hpread_end_psymtab (pst,
+				    NULL,	/* psymtab_include_list */
+				    0,		/* includes_used        */
+				    end_sym * sizeof (struct dntt_type_block),
+				                /* byte index in LNTT of end 
+				                   = capping symbol offset  
+				                   = LDSYMOFF of nextfile */
+				    0,	        /* text high            */
+				    NULL,	/* dependency_list      */
+				    0);	        /* dependencies_used    */
+
+	  global_syms = objfile->global_psymbols.next;
+	  static_syms = objfile->static_psymbols.next;
+
+	  curr_md++;
+	}
+      else if (VALID_CURR_MODULE &&
+	       ((CURR_MODULE_START == 0) || (CURR_MODULE_START == -1) ||
+		(CURR_MODULE_END == 0) || (CURR_MODULE_END == -1)))
+	{
+	  TELL_OBJFILE;
+	  warning ("Module \"%s\" [0x%x] has non-standard addresses.  It starts at 0x%x, ends at 0x%x, and will be skipped.",
+		   mod_name_string, curr_md, start_adr, end_adr);
+	  /* On to next module */
+	  curr_md++;
+	}
+      else
+	{
+	  /* First check if we are looking at a file with code in it
+	     that does not overlap the current module's code range */
+
+	  if (VALID_CURR_FILE ? (VALID_CURR_MODULE ? (CURR_FILE_END < CURR_MODULE_START) : 1) : 0)
+	    {
+
+	      /* Looking at file not corresponding to any module,
+	         create a psymtab for it */
+	      full_name_string = &vt_bits[(long) qFD[curr_fd].sbFile];
+	      start_adr = CURR_FILE_START;
+	      end_adr = CURR_FILE_END;
+	      start_sym = CURR_FILE_ISYM;
+
+	      /* Check if there are any procedures not handled until now, that
+	         begin before the start address of this file, and if so, adjust
+	         this module's start address to include them.  This handles routines that
+	         are in between file or module ranges for some reason (probably
+	         indicates a compiler bug */
+
+	      if (CURR_PROC_START < start_adr)
+		{
+		  TELL_OBJFILE;
+		  warning ("Found procedure \"%s\" [0x%x] that is not in any file or module.",
+			   &vt_bits[(long) qPD[curr_pd].sbProc], curr_pd);
+		  start_adr = CURR_PROC_START;
+		  if (CURR_PROC_ISYM < start_sym)
+		    start_sym = CURR_PROC_ISYM;
+		}
+
+	      /* Sometimes (compiler bug -- COBOL) the module end address is higher
+	         than the start address of the next module, so check for that and
+	         adjust accordingly */
+
+	      if (VALID_FILE (curr_fd + 1) && (FILE_START (curr_fd + 1) <= end_adr))
+		{
+		  TELL_OBJFILE;
+		  warning ("File \"%s\" [0x%x] has ending address after starting address of next file; adjusting ending address down.",
+			   full_name_string, curr_fd);
+		  end_adr = FILE_START (curr_fd + 1) - 1;	/* Is -4 (or -8 for 64-bit) better? */
+		}
+	      if (VALID_MODULE (curr_md) && (CURR_MODULE_START <= end_adr))
+		{
+		  TELL_OBJFILE;
+		  warning ("File \"%s\" [0x%x] has ending address after starting address of next module; adjusting ending address down.",
+			   full_name_string, curr_fd);
+		  end_adr = CURR_MODULE_START - 1;	/* Is -4 (or -8 for 64-bit) better? */
+		}
+
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("Make new psymtab for file %s (%x to %x).\n",
+			  full_name_string, start_adr, end_adr);
+		}
+#endif
+	      /* Create the basic psymtab, connecting it in the list
+	         for this objfile and pointing its symbol entries
+	         to the current end of the symbol areas in the objfile.
+
+	         The "ldsymoff" parameter is the byte offset in the LNTT
+	         of the first symbol in this file.  Some day we should
+	         turn this into an index (fix in hp-symtab-read.c as well).
+	         And it's not even the right byte offset, as we're using
+	         the size of a union! FIXME!  */
+	      pst = hpread_start_psymtab (objfile,
+					  section_offsets,	/* ?? */
+					  full_name_string,
+					  start_adr,	        /* Low text address */
+					  (start_sym * sizeof (struct dntt_type_block)),
+					                        /* ldsymoff */
+					  global_syms,
+					  static_syms);
+
+	      /* Set up to only enter each class referenced in this module once.  */
+	      class_entered = malloc (B_BYTES (pxdb_header_p->cd_entries));
+	      B_CLRALL (class_entered, pxdb_header_p->cd_entries);
+
+	      /* Scan the procedure descriptors for procedures in the current
+	         file, based on the starting addresses. */
+
+	      syms_in_pst = scan_procs (&curr_pd, qPD, pxdb_header_p->pd_entries,
+					start_adr, end_adr,
+					pst, vt_bits, objfile, section_offsets);
+
+	      /* Get ending symbol offset */
+
+	      end_sym = 0;
+	      /* First check for starting index before previous psymtab */
+	      if (pst_syms_count && start_sym < pst_syms_array[pst_syms_count - 1].end)
+		{
+		  end_sym = find_next_pst_start (start_sym);
+		}
+	      /* Look for next start index of a file or module, or procedure */
+	      if (!end_sym)
+		{
+		  int next_file_isym = find_next_file_isym (start_sym, qFD, curr_fd + 1, pxdb_header_p);
+		  int next_module_isym = find_next_module_isym (start_sym, qMD, curr_md, pxdb_header_p);
+		  int next_proc_isym = find_next_proc_isym (start_sym, qPD, curr_pd, pxdb_header_p);
+
+		  if (next_file_isym && next_module_isym)
+		    {
+		      /* pick lower of next file or module start index */
+		      end_sym = min (next_file_isym, next_module_isym);
+		    }
+		  else
+		    {
+		      /* one of them is zero, pick the other */
+		      end_sym = max (next_file_isym, next_module_isym);
+		    }
+
+		  /* As a precaution, check next procedure index too */
+		  if (!end_sym)
+		    end_sym = next_proc_isym;
+		  else
+		    end_sym = min (end_sym, next_proc_isym);
+		}
+
+	      /* Couldn't find procedure, file, or module, use globals as default */
+	      if (!end_sym)
+		end_sym = pxdb_header_p->globals;
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("File psymtab indices: %x to %x\n", start_sym, end_sym);
+		}
+#endif
+
+	      pst = hpread_end_psymtab (pst,
+					NULL,	/* psymtab_include_list */
+					0,	/* includes_used        */
+					end_sym * sizeof (struct dntt_type_block),
+					        /* byte index in LNTT of end 
+						   = capping symbol offset   
+						   = LDSYMOFF of nextfile */
+					end_adr,	/* text high */
+					NULL,	/* dependency_list */
+					0);	/* dependencies_used */
+
+	      record_pst_syms (start_sym, end_sym);
+
+	      if (NULL == pst)
+		warning ("No symbols in psymtab for file \"%s\" [0x%x].", full_name_string, curr_fd);
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("Made new psymtab for file %s (%x to %x), sym %x to %x.\n",
+			  full_name_string, start_adr, end_adr, CURR_FILE_ISYM, end_sym);
+		}
+#endif
+	      /* Prepare for the next psymtab. */
+	      global_syms = objfile->global_psymbols.next;
+	      static_syms = objfile->static_psymbols.next;
+	      free (class_entered);
+
+	      curr_fd++;
+	    }			/* Psymtab for file */
+	  else
+	    {
+	      /* We have a module for which we create a psymtab */
+
+	      mod_name_string = &vt_bits[(long) qMD[curr_md].sbMod];
+
+	      /* We will include the code ranges of any files that happen to
+	         overlap with this module */
+
+	      /* So, first pick the lower of the file's and module's start addresses */
+	      start_adr = CURR_MODULE_START;
+	      if (VALID_CURR_FILE)
+		{
+		  if (CURR_FILE_START < CURR_MODULE_START)
+		    {
+		      TELL_OBJFILE;
+		      warning ("File \"%s\" [0x%x] crosses beginning of module \"%s\".",
+			       &vt_bits[(long) qFD[curr_fd].sbFile],
+			       curr_fd, mod_name_string);
+
+		      start_adr = CURR_FILE_START;
+		    }
+		}
+
+	      /* Also pick the lower of the file's and the module's start symbol indices */
+	      start_sym = CURR_MODULE_ISYM;
+	      if (VALID_CURR_FILE && (CURR_FILE_ISYM < CURR_MODULE_ISYM))
+		start_sym = CURR_FILE_ISYM;
+
+	      /* For the end address, we scan through the files till we find one
+	         that overlaps the current module but ends beyond it; if no such file exists we
+	         simply use the module's start address.  
+	         (Note, if file entries themselves overlap
+	         we take the longest overlapping extension beyond the end of the module...)
+	         We assume that modules never overlap. */
+
+	      end_adr = CURR_MODULE_END;
+
+	      if (VALID_CURR_FILE)
+		{
+		  while (VALID_CURR_FILE && (CURR_FILE_START < end_adr))
+		    {
+
+#ifdef DUMPING
+		      if (dumping)
+			printf ("Maybe skipping file %s which overlaps with module %s\n",
+				&vt_bits[(long) qFD[curr_fd].sbFile], mod_name_string);
+#endif
+		      if (CURR_FILE_END > end_adr)
+			{
+			  TELL_OBJFILE;
+			  warning ("File \"%s\" [0x%x] crosses end of module \"%s\".",
+				   &vt_bits[(long) qFD[curr_fd].sbFile],
+				   curr_fd, mod_name_string);
+			  end_adr = CURR_FILE_END;
+			}
+		      curr_fd++;
+		    }
+		  curr_fd--;	/* back up after going too far */
+		}
+
+	      /* Sometimes (compiler bug -- COBOL) the module end address is higher
+	         than the start address of the next module, so check for that and
+	         adjust accordingly */
+
+	      if (VALID_MODULE (curr_md + 1) && (MODULE_START (curr_md + 1) <= end_adr))
+		{
+		  TELL_OBJFILE;
+		  warning ("Module \"%s\" [0x%x] has ending address after starting address of next module; adjusting ending address down.",
+			   mod_name_string, curr_md);
+		  end_adr = MODULE_START (curr_md + 1) - 1;	/* Is -4 (or -8 for 64-bit) better? */
+		}
+	      if (VALID_FILE (curr_fd + 1) && (FILE_START (curr_fd + 1) <= end_adr))
+		{
+		  TELL_OBJFILE;
+		  warning ("Module \"%s\" [0x%x] has ending address after starting address of next file; adjusting ending address down.",
+			   mod_name_string, curr_md);
+		  end_adr = FILE_START (curr_fd + 1) - 1;	/* Is -4 (or -8 for 64-bit) better? */
+		}
+
+	      /* Use one file to get the full name for the module.  This
+	         situation can arise if there is executable code in a #include
+	         file.  Each file with code in it gets a qFD.  Files which don't
+	         contribute code don't get a qFD, even if they include files
+	         which do, e.g.: 
+
+	         body.c:                    rtn.h:
+	         int x;                     int main() {
+	         #include "rtn.h"               return x;
+	         }
+
+	         There will a qFD for "rtn.h",and a qMD for "body.c",
+	         but no qMD for "rtn.h" or qFD for "body.c"!
+
+	         We pick the name of the last file to overlap with this
+	         module.  C convention is to put include files first.  In a
+	         perfect world, we could check names and use the file whose full
+	         path name ends with the module name. */
+
+	      if (VALID_CURR_FILE)
+		full_name_string = &vt_bits[(long) qFD[curr_fd].sbFile];
+	      else
+		full_name_string = mod_name_string;
+
+	      /* Check if there are any procedures not handled until now, that
+	         begin before the start address we have now, and if so, adjust
+	         this psymtab's start address to include them.  This handles routines that
+	         are in between file or module ranges for some reason (probably
+	         indicates a compiler bug */
+
+	      if (CURR_PROC_START < start_adr)
+		{
+		  TELL_OBJFILE;
+		  warning ("Found procedure \"%s\" [0x%x] that is not in any file or module.",
+			   &vt_bits[(long) qPD[curr_pd].sbProc], curr_pd);
+		  start_adr = CURR_PROC_START;
+		  if (CURR_PROC_ISYM < start_sym)
+		    start_sym = CURR_PROC_ISYM;
+		}
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("Make new psymtab for module %s (%x to %x), using file %s\n",
+		     mod_name_string, start_adr, end_adr, full_name_string);
+		}
+#endif
+	      /* Create the basic psymtab, connecting it in the list
+	         for this objfile and pointing its symbol entries
+	         to the current end of the symbol areas in the objfile.
+
+	         The "ldsymoff" parameter is the byte offset in the LNTT
+	         of the first symbol in this file.  Some day we should
+	         turn this into an index (fix in hp-symtab-read.c as well).
+	         And it's not even the right byte offset, as we're using
+	         the size of a union! FIXME!  */
+	      pst = hpread_start_psymtab (objfile,
+					  section_offsets,	/* ?? */
+					  full_name_string,
+					  start_adr,	/* Low text address */
+					  (start_sym * sizeof (struct dntt_type_block)),
+					                /* ldsymoff */
+					  global_syms,
+					  static_syms);
+
+	      /* Set up to only enter each class referenced in this module once.  */
+	      class_entered = malloc (B_BYTES (pxdb_header_p->cd_entries));
+	      B_CLRALL (class_entered, pxdb_header_p->cd_entries);
+
+	      /* Scan the procedure descriptors for procedures in the current
+	         module, based on the starting addresses. */
+
+	      syms_in_pst = scan_procs (&curr_pd, qPD, pxdb_header_p->pd_entries,
+					start_adr, end_adr,
+					pst, vt_bits, objfile, section_offsets);
+
+	      /* Get ending symbol offset */
+
+	      end_sym = 0;
+	      /* First check for starting index before previous psymtab */
+	      if (pst_syms_count && start_sym < pst_syms_array[pst_syms_count - 1].end)
+		{
+		  end_sym = find_next_pst_start (start_sym);
+		}
+	      /* Look for next start index of a file or module, or procedure */
+	      if (!end_sym)
+		{
+		  int next_file_isym = find_next_file_isym (start_sym, qFD, curr_fd + 1, pxdb_header_p);
+		  int next_module_isym = find_next_module_isym (start_sym, qMD, curr_md + 1, pxdb_header_p);
+		  int next_proc_isym = find_next_proc_isym (start_sym, qPD, curr_pd, pxdb_header_p);
+
+		  if (next_file_isym && next_module_isym)
+		    {
+		      /* pick lower of next file or module start index */
+		      end_sym = min (next_file_isym, next_module_isym);
+		    }
+		  else
+		    {
+		      /* one of them is zero, pick the other */
+		      end_sym = max (next_file_isym, next_module_isym);
+		    }
+
+		  /* As a precaution, check next procedure index too */
+		  if (!end_sym)
+		    end_sym = next_proc_isym;
+		  else
+		    end_sym = min (end_sym, next_proc_isym);
+		}
+
+	      /* Couldn't find procedure, file, or module, use globals as default */
+	      if (!end_sym)
+		end_sym = pxdb_header_p->globals;
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("Module psymtab indices: %x to %x\n", start_sym, end_sym);
+		}
+#endif
+
+	      pst = hpread_end_psymtab (pst,
+					NULL,	/* psymtab_include_list */
+					0,	/* includes_used        */
+					end_sym * sizeof (struct dntt_type_block),
+					        /* byte index in LNTT of end 
+						   = capping symbol offset   
+						   = LDSYMOFF of nextfile */
+					end_adr,	/* text high */
+					NULL,	/* dependency_list      */
+					0);	/* dependencies_used    */
+
+	      record_pst_syms (start_sym, end_sym);
+
+	      if (NULL == pst)
+		warning ("No symbols in psymtab for module \"%s\" [0x%x].", mod_name_string, curr_md);
+
+#ifdef DUMPING
+	      if (dumping)
+		{
+		  printf ("Made new psymtab for module %s (%x to %x), sym %x to %x.\n",
+			  mod_name_string, start_adr, end_adr, CURR_MODULE_ISYM, end_sym);
+		}
+#endif
+
+	      /* Prepare for the next psymtab. */
+	      global_syms = objfile->global_psymbols.next;
+	      static_syms = objfile->static_psymbols.next;
+	      free (class_entered);
+
+	      curr_md++;
+	      curr_fd++;
+	    }			/* psymtab for module */
+	}			/* psymtab for non-bogus file or module */
+    }				/* End of while loop over all files & modules */
+
+  /* There may be some routines after all files and modules -- these will get
+     inserted in a separate new module of their own */
+  if (VALID_CURR_PROC)
+    {
+      start_adr = CURR_PROC_START;
+      end_adr = qPD[pxdb_header_p->pd_entries - 1].adrEnd;
+      TELL_OBJFILE;
+      warning ("Found functions beyond end of all files and modules [0x%x].", curr_pd);
+#ifdef DUMPING
+      if (dumping)
+	{
+	  printf ("Orphan functions at end, PD %d and beyond (%x to %x)\n",
+		  curr_pd, start_adr, end_adr);
+	}
+#endif
+      pst = hpread_start_psymtab (objfile,
+				  section_offsets,	/* ?? */
+				  "orphans",
+				  start_adr,	/* Low text address */
+				  (CURR_PROC_ISYM * sizeof (struct dntt_type_block)),
+				                /* ldsymoff */
+				  global_syms,
+				  static_syms);
+
+      scan_procs (&curr_pd, qPD, pxdb_header_p->pd_entries,
+		  start_adr, end_adr,
+		  pst, vt_bits, objfile, section_offsets);
+
+      pst = hpread_end_psymtab (pst,
+				NULL,	/* psymtab_include_list */
+				0,	/* includes_used */
+				pxdb_header_p->globals * sizeof (struct dntt_type_block),
+				        /* byte index in LNTT of end 
+					   = capping symbol offset   
+					   = LDSYMOFF of nextfile */
+				end_adr,	/* text high  */
+				NULL,	/* dependency_list */
+				0);	/* dependencies_used */
+    }
+
+
+#ifdef NEVER_NEVER
+  /* Now build psts for non-module things (in the tail of
+     the LNTT, after the last END MODULE entry).
+
+     If null psts were kept on the chain, this would be
+     a solution.  FIXME */
+  pst = hpread_start_psymtab (objfile,
+			      section_offsets,
+			      "globals",
+			      0,
+			      (pxdb_header_p->globals
+			       * sizeof (struct dntt_type_block)),
+			      objfile->global_psymbols.next,
+			      objfile->static_psymbols.next);
+  hpread_end_psymtab (pst,
+		      NULL, 0,
+		      (max_LNTT_sym_index * sizeof (struct dntt_type_block)),
+		      0,
+		      NULL, 0);
+#endif
+
+  clear_pst_syms ();
+
+  return 1;
+
+}				/* End of hpread_quick_traverse. */
+
+
+/* Get appropriate header, based on pxdb type. 
+   Return value: 1 if ok, 0 if not */
+int
+hpread_get_header (objfile, pxdb_header_p)
+     struct objfile *objfile;
+     PXDB_header_ptr pxdb_header_p;
+{
+  asection *pinfo_section, *debug_section, *header_section;
+
+#ifdef DUMPING
+  /* Turn on for debugging information */
+  static int dumping = 0;
+#endif
+
+  header_section = bfd_get_section_by_name (objfile->obfd, "$HEADER$");
+  if (!header_section)
+    {
+      /* We don't have either PINFO or DEBUG sections.  But
+         stuff like "libc.sl" has no debug info.  There's no
+         need to warn the user of this, as it may be ok. The
+         caller will figure it out and issue any needed
+         messages. */
+#ifdef DUMPING
+      if (dumping)
+	printf ("==No debug info at all for %s.\n", objfile->name);
+#endif
+
+      return 0;
+    }
+
+  /* We would like either a $DEBUG$ or $PINFO$ section.
+     Once we know which, we can understand the header
+     data (which we have defined to suit the more common
+     $DEBUG$ case). */
+  debug_section = bfd_get_section_by_name (objfile->obfd, "$DEBUG$");
+  pinfo_section = bfd_get_section_by_name (objfile->obfd, "$PINFO$");
+  if (debug_section)
+    {
+      /* The expected case: normal pxdb header. */
+      bfd_get_section_contents (objfile->obfd, header_section,
+				pxdb_header_p, 0, sizeof (PXDB_header));
+
+      if (!pxdb_header_p->pxdbed)
+	{
+	  /* This shouldn't happen if we check in "symfile.c". */
+	  return 0;
+	}			/* DEBUG section */
+    }
+
+  else if (pinfo_section)
+    {
+      /* The DOC case; we need to translate this into a
+         regular header. */
+      DOC_info_PXDB_header doc_header;
+
+#ifdef DUMPING
+      if (dumping)
+	{
+	  printf ("==OOps, PINFO, let's try to handle this, %s.\n", objfile->name);
+	}
+#endif
+
+      bfd_get_section_contents (objfile->obfd,
+				header_section,
+				&doc_header, 0,
+				sizeof (DOC_info_PXDB_header));
+
+      if (!doc_header.pxdbed)
+	{
+	  /* This shouldn't happen if we check in "symfile.c". */
+	  warning ("File \"%s\" not processed by pxdb!", objfile->name);
+	  return 0;
+	}
+
+      /* Copy relevent fields to standard header passed in. */
+      pxdb_header_p->pd_entries = doc_header.pd_entries;
+      pxdb_header_p->fd_entries = doc_header.fd_entries;
+      pxdb_header_p->md_entries = doc_header.md_entries;
+      pxdb_header_p->pxdbed = doc_header.pxdbed;
+      pxdb_header_p->bighdr = doc_header.bighdr;
+      pxdb_header_p->sa_header = doc_header.sa_header;
+      pxdb_header_p->inlined = doc_header.inlined;
+      pxdb_header_p->globals = doc_header.globals;
+      pxdb_header_p->time = doc_header.time;
+      pxdb_header_p->pg_entries = doc_header.pg_entries;
+      pxdb_header_p->functions = doc_header.functions;
+      pxdb_header_p->files = doc_header.files;
+      pxdb_header_p->cd_entries = doc_header.cd_entries;
+      pxdb_header_p->aa_entries = doc_header.aa_entries;
+      pxdb_header_p->oi_entries = doc_header.oi_entries;
+      pxdb_header_p->version = doc_header.version;
+    }				/* PINFO section */
+
+  else
+    {
+#ifdef DUMPING
+      if (dumping)
+	printf ("==No debug info at all for %s.\n", objfile->name);
+#endif
+
+      return 0;
+
+    }
+
+  return 1;
+}				/* End of hpread_get_header */
+#endif /* QUICK_LOOK_UP */
+
+
+/* Initialization for reading native HP C debug symbols from OBJFILE.
+
+   Its only purpose in life is to set up the symbol reader's private
+   per-objfile data structures, and read in the raw contents of the debug
+   sections (attaching pointers to the debug info into the private data
+   structures).
+
+   Since BFD doesn't know how to read debug symbols in a format-independent
+   way (and may never do so...), we have to do it ourselves.  Note we may
+   be called on a file without native HP C debugging symbols.
+
+   FIXME, there should be a cleaner peephole into the BFD environment
+   here. */
+void
+hpread_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  asection *vt_section, *slt_section, *lntt_section, *gntt_section;
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_private = (PTR)
+    xmmalloc (objfile->md, sizeof (struct hpread_symfile_info));
+  memset (objfile->sym_private, 0, sizeof (struct hpread_symfile_info));
+
+  /* We haven't read in any types yet.  */
+  TYPE_VECTOR (objfile) = 0;
+
+  /* Read in data from the $GNTT$ subspace.  */
+  gntt_section = bfd_get_section_by_name (objfile->obfd, "$GNTT$");
+  if (!gntt_section)
+    return;
+
+  GNTT (objfile)
+    = obstack_alloc (&objfile->symbol_obstack,
+		     bfd_section_size (objfile->obfd, gntt_section));
+
+  bfd_get_section_contents (objfile->obfd, gntt_section, GNTT (objfile),
+			    0, bfd_section_size (objfile->obfd, gntt_section));
+
+  GNTT_SYMCOUNT (objfile)
+    = bfd_section_size (objfile->obfd, gntt_section)
+    / sizeof (struct dntt_type_block);
+
+  /* Read in data from the $LNTT$ subspace.   Also keep track of the number
+     of LNTT symbols.
+
+     FIXME: this could be moved into the psymtab-to-symtab expansion
+     code, and save startup time.  At the moment this data is
+     still used, though.  We'd need a way to tell hp-symtab-read.c
+     whether or not to load the LNTT. */
+  lntt_section = bfd_get_section_by_name (objfile->obfd, "$LNTT$");
+  if (!lntt_section)
+    return;
+
+  LNTT (objfile)
+    = obstack_alloc (&objfile->symbol_obstack,
+		     bfd_section_size (objfile->obfd, lntt_section));
+
+  bfd_get_section_contents (objfile->obfd, lntt_section, LNTT (objfile),
+			    0, bfd_section_size (objfile->obfd, lntt_section));
+
+  LNTT_SYMCOUNT (objfile)
+    = bfd_section_size (objfile->obfd, lntt_section)
+    / sizeof (struct dntt_type_block);
+
+  /* Read in data from the $SLT$ subspace.  $SLT$ contains information
+     on source line numbers.  */
+  slt_section = bfd_get_section_by_name (objfile->obfd, "$SLT$");
+  if (!slt_section)
+    return;
+
+  SLT (objfile) =
+    obstack_alloc (&objfile->symbol_obstack,
+		   bfd_section_size (objfile->obfd, slt_section));
+
+  bfd_get_section_contents (objfile->obfd, slt_section, SLT (objfile),
+			    0, bfd_section_size (objfile->obfd, slt_section));
+
+  /* Read in data from the $VT$ subspace.  $VT$ contains things like
+     names and constants.  Keep track of the number of symbols in the VT.  */
+  vt_section = bfd_get_section_by_name (objfile->obfd, "$VT$");
+  if (!vt_section)
+    return;
+
+  VT_SIZE (objfile) = bfd_section_size (objfile->obfd, vt_section);
+
+  VT (objfile) =
+    (char *) obstack_alloc (&objfile->symbol_obstack,
+			    VT_SIZE (objfile));
+
+  bfd_get_section_contents (objfile->obfd, vt_section, VT (objfile),
+			    0, VT_SIZE (objfile));
+}
+
+/* Scan and build partial symbols for a symbol file.
+
+   The minimal symbol table (either SOM or HP a.out) has already been
+   read in; all we need to do is setup partial symbols based on the
+   native debugging information.
+
+   Note that the minimal table is produced by the linker, and has
+   only global routines in it; the psymtab is based on compiler-
+   generated debug information and has non-global
+   routines in it as well as files and class information.
+
+   We assume hpread_symfile_init has been called to initialize the
+   symbol reader's private data structures.
+
+   SECTION_OFFSETS contains offsets relative to which the symbols in the
+   various sections are (depending where the sections were actually loaded).
+   MAINLINE is true if we are reading the main symbol table (as
+   opposed to a shared lib or dynamically loaded file). */
+void
+hpread_build_psymtabs (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+
+#ifdef DUMPING
+  /* Turn this on to get debugging output. */
+  static int dumping = 0;
+#endif
+
+  char *namestring;
+  int past_first_source_file = 0;
+  struct cleanup *old_chain;
+
+  int hp_symnum, symcount, i;
+  int scan_start = 0;
+
+  union dnttentry *dn_bufp;
+  unsigned long valu;
+  char *p;
+  int texthigh = 0;
+  int have_name = 0;
+
+  /* Current partial symtab */
+  struct partial_symtab *pst;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+
+  /* Just in case the stabs reader left turds lying around.  */
+  free_pending_blocks ();
+  make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+  pst = (struct partial_symtab *) 0;
+
+  /* We shouldn't use alloca, instead use malloc/free.  Doing so avoids
+     a number of problems with cross compilation and creating useless holes
+     in the stack when we have to allocate new entries.  FIXME.  */
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  old_chain = make_cleanup ((make_cleanup_func) free_objfile, objfile);
+
+  last_source_file = 0;
+
+#ifdef QUICK_LOOK_UP
+  {
+    /* Begin code for new-style loading of quick look-up tables. */
+
+    /* elz: this checks whether the file has beeen processed by pxdb.
+       If not we would like to try to read the psymbols in
+       anyway, but it turns out to be not so easy. So this could 
+       actually be commented out, but I leave it in, just in case
+       we decide to add support for non-pxdb-ed stuff in the future. */
+    PXDB_header pxdb_header;
+    int found_modules_in_program;
+
+    if (hpread_get_header (objfile, &pxdb_header))
+      {
+	/* Build a minimal table.  No types, no global variables,
+	   no include files.... */
+#ifdef DUMPING
+	if (dumping)
+	  printf ("\nNew method for %s\n", objfile->name);
+#endif
+
+	/* elz: quick_traverse returns true if it found
+	   some modules in the main source file, other
+	   than those in end.c
+	   In C and C++, all the files have MODULES entries
+	   in the LNTT, and the quick table traverse is all 
+	   based on finding these MODULES entries. Without 
+	   those it cannot work. 
+	   It happens that F77 programs don't have MODULES
+	   so the quick traverse gets confused. F90 programs
+	   have modules, and the quick method still works.
+	   So, if modules (other than those in end.c) are
+	   not found we give up on the quick table stuff, 
+	   and fall back on the slower method  */
+	found_modules_in_program = hpread_quick_traverse (objfile,
+							  section_offsets,
+							  GNTT (objfile),
+							  VT (objfile),
+							  &pxdb_header);
+
+	discard_cleanups (old_chain);
+
+		/* Set up to scan the global section of the LNTT.
+
+		   This field is not always correct: if there are
+		   no globals, it will point to the last record in
+		   the regular LNTT, which is usually an END MODULE.
+
+		   Since it might happen that there could be a file
+		   with just one global record, there's no way to
+		   tell other than by looking at the record, so that's
+		   done below. */
+	if (found_modules_in_program)
+	  scan_start = pxdb_header.globals;
+      }
+#ifdef DUMPING
+    else
+      {
+	if (dumping)
+	  printf ("\nGoing on to old method for %s\n", objfile->name);
+      }
+#endif
+  }
+#endif /* QUICK_LOOK_UP */
+
+    /* Make two passes, one over the GNTT symbols, the other for the
+       LNTT symbols.
+
+     JB comment: above isn't true--they only make one pass, over
+     the LNTT.  */
+  for (i = 0; i < 1; i++)
+    {
+      int within_function = 0;
+
+      if (i)
+	symcount = GNTT_SYMCOUNT (objfile);
+      else
+	symcount = LNTT_SYMCOUNT (objfile);
+
+
+      for (hp_symnum = scan_start; hp_symnum < symcount; hp_symnum++)
+	{
+	  QUIT;
+	  if (i)
+	    dn_bufp = hpread_get_gntt (hp_symnum, objfile);
+	  else
+	    dn_bufp = hpread_get_lntt (hp_symnum, objfile);
+
+	  if (dn_bufp->dblock.extension)
+	    continue;
+
+	  /* Only handle things which are necessary for minimal symbols.
+	     everything else is ignored.  */
+	  switch (dn_bufp->dblock.kind)
+	    {
+	    case DNTT_TYPE_SRCFILE:
+	      {
+#ifdef QUICK_LOOK_UP
+		if (scan_start == hp_symnum
+		    && symcount == hp_symnum + 1)
+		  {
+		    /* If there are NO globals in an executable,
+		       PXDB's index to the globals will point to
+		       the last record in the file, which 
+		       could be this record. (this happened for F77 libraries)
+		       ignore it and be done! */
+		    continue;
+		  }
+#endif /* QUICK_LOOK_UP */
+
+		/* A source file of some kind.  Note this may simply
+		   be an included file.  */
+		SET_NAMESTRING (dn_bufp, &namestring, objfile);
+
+		/* Check if this is the source file we are already working
+		   with.  */
+		if (pst && !strcmp (namestring, pst->filename))
+		  continue;
+
+		/* Check if this is an include file, if so check if we have
+		   already seen it.  Add it to the include list */
+		p = strrchr (namestring, '.');
+		if (!strcmp (p, ".h"))
+		  {
+		    int j, found;
+
+		    found = 0;
+		    for (j = 0; j < includes_used; j++)
+		      if (!strcmp (namestring, psymtab_include_list[j]))
+			{
+			  found = 1;
+			  break;
+			}
+		    if (found)
+		      continue;
+
+		    /* Add it to the list of includes seen so far and
+		       allocate more include space if necessary.  */
+		    psymtab_include_list[includes_used++] = namestring;
+		    if (includes_used >= includes_allocated)
+		      {
+			char **orig = psymtab_include_list;
+
+			psymtab_include_list = (char **)
+			  alloca ((includes_allocated *= 2) *
+				  sizeof (char *));
+			memcpy ((PTR) psymtab_include_list, (PTR) orig,
+				includes_used * sizeof (char *));
+		      }
+		    continue;
+		  }
+
+		if (pst)
+		  {
+		    if (!have_name)
+		      {
+			pst->filename = (char *)
+			  obstack_alloc (&pst->objfile->psymbol_obstack,
+					 strlen (namestring) + 1);
+			strcpy (pst->filename, namestring);
+			have_name = 1;
+			continue;
+		      }
+		    continue;
+		  }
+
+		/* This is a bonafide new source file.
+		   End the current partial symtab and start a new one.  */
+
+		if (pst && past_first_source_file)
+		  {
+		    hpread_end_psymtab (pst, psymtab_include_list,
+					includes_used,
+					(hp_symnum
+					 * sizeof (struct dntt_type_block)),
+					texthigh,
+					dependency_list, dependencies_used);
+		    pst = (struct partial_symtab *) 0;
+		    includes_used = 0;
+		    dependencies_used = 0;
+		  }
+		else
+		  past_first_source_file = 1;
+
+		valu = hpread_get_textlow (i, hp_symnum, objfile, symcount);
+		valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		pst = hpread_start_psymtab (objfile, section_offsets,
+					    namestring, valu,
+					    (hp_symnum
+					     * sizeof (struct dntt_type_block)),
+					    objfile->global_psymbols.next,
+					    objfile->static_psymbols.next);
+		texthigh = valu;
+		have_name = 1;
+		continue;
+	      }
+
+	    case DNTT_TYPE_MODULE:
+	      /* A source file.  It's still unclear to me what the
+	         real difference between a DNTT_TYPE_SRCFILE and DNTT_TYPE_MODULE
+	         is supposed to be.  */
+
+	      /* First end the previous psymtab */
+	      if (pst)
+		{
+		  hpread_end_psymtab (pst, psymtab_include_list, includes_used,
+				      ((hp_symnum - 1)
+				       * sizeof (struct dntt_type_block)),
+				      texthigh,
+				      dependency_list, dependencies_used);
+		  pst = (struct partial_symtab *) 0;
+		  includes_used = 0;
+		  dependencies_used = 0;
+		  have_name = 0;
+		}
+
+	      /* Now begin a new module and a new psymtab for it */
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      valu = hpread_get_textlow (i, hp_symnum, objfile, symcount);
+	      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      if (!pst)
+		{
+		  pst = hpread_start_psymtab (objfile, section_offsets,
+					      namestring, valu,
+					      (hp_symnum
+					       * sizeof (struct dntt_type_block)),
+					      objfile->global_psymbols.next,
+					      objfile->static_psymbols.next);
+		  texthigh = valu;
+		  have_name = 0;
+		}
+	      continue;
+
+	    case DNTT_TYPE_FUNCTION:
+	    case DNTT_TYPE_ENTRY:
+	      /* The beginning of a function.  DNTT_TYPE_ENTRY may also denote
+	         a secondary entry point.  */
+	      valu = dn_bufp->dfunc.hiaddr + ANOFFSET (section_offsets,
+						       SECT_OFF_TEXT);
+	      if (valu > texthigh)
+		texthigh = valu;
+	      valu = dn_bufp->dfunc.lowaddr +
+		ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      if (dn_bufp->dfunc.global)
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_BLOCK,
+				     &objfile->global_psymbols, valu,
+				     0, language_unknown, objfile);
+	      else
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_BLOCK,
+				     &objfile->static_psymbols, valu,
+				     0, language_unknown, objfile);
+	      within_function = 1;
+	      continue;
+
+	    case DNTT_TYPE_DOC_FUNCTION:
+	      valu = dn_bufp->ddocfunc.hiaddr + ANOFFSET (section_offsets,
+							  SECT_OFF_TEXT);
+	      if (valu > texthigh)
+		texthigh = valu;
+	      valu = dn_bufp->ddocfunc.lowaddr +
+		ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      if (dn_bufp->ddocfunc.global)
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_BLOCK,
+				     &objfile->global_psymbols, valu,
+				     0, language_unknown, objfile);
+	      else
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_BLOCK,
+				     &objfile->static_psymbols, valu,
+				     0, language_unknown, objfile);
+	      within_function = 1;
+	      continue;
+
+	    case DNTT_TYPE_BEGIN:
+	    case DNTT_TYPE_END:
+	      /* We don't check MODULE end here, because there can be
+	         symbols beyond the module end which properly belong to the
+	         current psymtab -- so we wait till the next MODULE start */
+
+
+#ifdef QUICK_LOOK_UP
+	      if (scan_start == hp_symnum
+		  && symcount == hp_symnum + 1)
+		{
+		  /* If there are NO globals in an executable,
+		     PXDB's index to the globals will point to
+		     the last record in the file, which is
+		     probably an END MODULE, i.e. this record.
+		     ignore it and be done! */
+		  continue;
+		}
+#endif /* QUICK_LOOK_UP */
+
+	      /* Scope block begin/end.  We only care about function
+	         and file blocks right now.  */
+
+	      if ((dn_bufp->dend.endkind == DNTT_TYPE_FUNCTION) ||
+		  (dn_bufp->dend.endkind == DNTT_TYPE_DOC_FUNCTION))
+		within_function = 0;
+	      continue;
+
+	    case DNTT_TYPE_SVAR:
+	    case DNTT_TYPE_DVAR:
+	    case DNTT_TYPE_TYPEDEF:
+	    case DNTT_TYPE_TAGDEF:
+	      {
+		/* Variables, typedefs an the like.  */
+		enum address_class storage;
+		namespace_enum namespace;
+
+		/* Don't add locals to the partial symbol table.  */
+		if (within_function
+		    && (dn_bufp->dblock.kind == DNTT_TYPE_SVAR
+			|| dn_bufp->dblock.kind == DNTT_TYPE_DVAR))
+		  continue;
+
+		/* TAGDEFs go into the structure namespace.  */
+		if (dn_bufp->dblock.kind == DNTT_TYPE_TAGDEF)
+		  namespace = STRUCT_NAMESPACE;
+		else
+		  namespace = VAR_NAMESPACE;
+
+		/* What kind of "storage" does this use?  */
+		if (dn_bufp->dblock.kind == DNTT_TYPE_SVAR)
+		  storage = LOC_STATIC;
+		else if (dn_bufp->dblock.kind == DNTT_TYPE_DVAR
+			 && dn_bufp->ddvar.regvar)
+		  storage = LOC_REGISTER;
+		else if (dn_bufp->dblock.kind == DNTT_TYPE_DVAR)
+		  storage = LOC_LOCAL;
+		else
+		  storage = LOC_UNDEF;
+
+		SET_NAMESTRING (dn_bufp, &namestring, objfile);
+		if (!pst)
+		  {
+		    pst = hpread_start_psymtab (objfile, section_offsets,
+						"globals", 0,
+						(hp_symnum
+						 * sizeof (struct dntt_type_block)),
+						objfile->global_psymbols.next,
+						objfile->static_psymbols.next);
+		  }
+
+		/* Compute address of the data symbol */
+		valu = dn_bufp->dsvar.location;
+		/* Relocate in case it's in a shared library */
+		if (storage == LOC_STATIC)
+		  valu += ANOFFSET (section_offsets, SECT_OFF_DATA);
+
+		/* Luckily, dvar, svar, typedef, and tagdef all
+		   have their "global" bit in the same place, so it works
+		   (though it's bad programming practice) to reference
+		   "dsvar.global" even though we may be looking at
+		   any of the above four types. */
+		if (dn_bufp->dsvar.global)
+		  {
+		    add_psymbol_to_list (namestring, strlen (namestring),
+					 namespace, storage,
+					 &objfile->global_psymbols,
+					 valu,
+					 0, language_unknown, objfile);
+		  }
+		else
+		  {
+		    add_psymbol_to_list (namestring, strlen (namestring),
+					 namespace, storage,
+					 &objfile->static_psymbols,
+					 valu,
+					 0, language_unknown, objfile);
+		  }
+
+		/* For TAGDEF's, the above code added the tagname to the
+		   struct namespace. This will cause tag "t" to be found
+		   on a reference of the form "(struct t) x". But for
+		   C++ classes, "t" will also be a typename, which we
+		   want to find on a reference of the form "ptype t".
+		   Therefore, we also add "t" to the var namespace.
+		   Do the same for enum's due to the way aCC generates
+		   debug info for these (see more extended comment
+		   in hp-symtab-read.c).
+		   We do the same for templates, so that "ptype t"
+		   where "t" is a template also works. */
+		if (dn_bufp->dblock.kind == DNTT_TYPE_TAGDEF &&
+		  dn_bufp->dtype.type.dnttp.index < LNTT_SYMCOUNT (objfile))
+		  {
+		    int global = dn_bufp->dtag.global;
+		    /* Look ahead to see if it's a C++ class */
+		    dn_bufp = hpread_get_lntt (dn_bufp->dtype.type.dnttp.index, objfile);
+		    if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS ||
+			dn_bufp->dblock.kind == DNTT_TYPE_ENUM ||
+			dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE)
+		      {
+			if (global)
+			  {
+			    add_psymbol_to_list (namestring, strlen (namestring),
+						 VAR_NAMESPACE, storage,
+						 &objfile->global_psymbols,
+						 dn_bufp->dsvar.location,
+						 0, language_unknown, objfile);
+			  }
+			else
+			  {
+			    add_psymbol_to_list (namestring, strlen (namestring),
+						 VAR_NAMESPACE, storage,
+						 &objfile->static_psymbols,
+						 dn_bufp->dsvar.location,
+						 0, language_unknown, objfile);
+			  }
+		      }
+		  }
+	      }
+	      continue;
+
+	    case DNTT_TYPE_MEMENUM:
+	    case DNTT_TYPE_CONST:
+	      /* Constants and members of enumerated types.  */
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      if (!pst)
+		{
+		  pst = hpread_start_psymtab (objfile, section_offsets,
+					      "globals", 0,
+					      (hp_symnum
+					       * sizeof (struct dntt_type_block)),
+					      objfile->global_psymbols.next,
+					      objfile->static_psymbols.next);
+		}
+	      if (dn_bufp->dconst.global)
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_CONST,
+				     &objfile->global_psymbols, 0,
+				     0, language_unknown, objfile);
+	      else
+		add_psymbol_to_list (namestring, strlen (namestring),
+				     VAR_NAMESPACE, LOC_CONST,
+				     &objfile->static_psymbols, 0,
+				     0, language_unknown, objfile);
+	      continue;
+	    default:
+	      continue;
+	    }
+	}
+    }
+
+  /* End any pending partial symbol table. */
+  if (pst)
+    {
+      hpread_end_psymtab (pst, psymtab_include_list, includes_used,
+			  hp_symnum * sizeof (struct dntt_type_block),
+			  0, dependency_list, dependencies_used);
+    }
+
+  discard_cleanups (old_chain);
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+void
+hpread_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile->sym_private != NULL)
+    {
+      mfree (objfile->md, objfile->sym_private);
+    }
+}
+
+
+/* The remaining functions are all for internal use only.  */
+
+/* Various small functions to get entries in the debug symbol sections.  */
+
+union dnttentry *
+hpread_get_lntt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union dnttentry *)
+    &(LNTT (objfile)[(index * sizeof (struct dntt_type_block))]);
+}
+
+static union dnttentry *
+hpread_get_gntt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union dnttentry *)
+    &(GNTT (objfile)[(index * sizeof (struct dntt_type_block))]);
+}
+
+union sltentry *
+hpread_get_slt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union sltentry *) &(SLT (objfile)[index * sizeof (union sltentry)]);
+}
+
+/* Get the low address associated with some symbol (typically the start
+   of a particular source file or module).  Since that information is not
+   stored as part of the DNTT_TYPE_MODULE or DNTT_TYPE_SRCFILE symbol we must infer it from
+   the existance of DNTT_TYPE_FUNCTION symbols.  */
+
+static unsigned long
+hpread_get_textlow (global, index, objfile, symcount)
+     int global;
+     int index;
+     struct objfile *objfile;
+     int symcount;
+{
+  union dnttentry *dn_bufp;
+  struct minimal_symbol *msymbol;
+
+  /* Look for a DNTT_TYPE_FUNCTION symbol.  */
+  if (index < symcount)		/* symcount is the number of symbols in */
+    {				/*   the dbinfo, LNTT table */
+      do
+	{
+	  if (global)
+	    dn_bufp = hpread_get_gntt (index++, objfile);
+	  else
+	    dn_bufp = hpread_get_lntt (index++, objfile);
+	}
+      while (dn_bufp->dblock.kind != DNTT_TYPE_FUNCTION
+	     && dn_bufp->dblock.kind != DNTT_TYPE_DOC_FUNCTION
+	     && dn_bufp->dblock.kind != DNTT_TYPE_END
+	     && index < symcount);
+    }
+
+  /* Avoid going past a DNTT_TYPE_END when looking for a DNTT_TYPE_FUNCTION.  This
+     might happen when a sourcefile has no functions.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_END)
+    return 0;
+
+  /* Avoid going past the end of the LNTT file */
+  if (index == symcount)
+    return 0;
+
+  /* The minimal symbols are typically more accurate for some reason.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_FUNCTION)
+    msymbol = lookup_minimal_symbol (dn_bufp->dfunc.name + VT (objfile), NULL,
+				     objfile);
+  else				/* must be a DNTT_TYPE_DOC_FUNCTION */
+    msymbol = lookup_minimal_symbol (dn_bufp->ddocfunc.name + VT (objfile), NULL,
+				     objfile);
+
+  if (msymbol)
+    return SYMBOL_VALUE_ADDRESS (msymbol);
+  else
+    return dn_bufp->dfunc.lowaddr;
+}
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+static struct partial_symtab *
+hpread_start_psymtab (objfile, section_offsets,
+		      filename, textlow, ldsymoff, global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     CORE_ADDR textlow;
+     int ldsymoff;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  int offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
+  extern void hpread_psymtab_to_symtab ();
+  struct partial_symtab *result =
+  start_psymtab_common (objfile, section_offsets,
+			filename, textlow, global_syms, static_syms);
+
+  result->textlow += offset;
+  result->read_symtab_private = (char *)
+    obstack_alloc (&objfile->psymbol_obstack, sizeof (struct symloc));
+  LDSYMOFF (result) = ldsymoff;
+  result->read_symtab = hpread_psymtab_to_symtab;
+
+  return result;
+}
+
+
+/* Close off the current usage of PST.  
+   Returns PST or NULL if the partial symtab was empty and thrown away.
+
+   capping_symbol_offset  --Byte index in LNTT or GNTT of the
+   last symbol processed during the build
+   of the previous pst.
+
+   FIXME:  List variables and peculiarities of same.  */
+
+static struct partial_symtab *
+hpread_end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
+		    capping_text, dependency_list, number_dependencies)
+     struct partial_symtab *pst;
+     char **include_list;
+     int num_includes;
+     int capping_symbol_offset;
+     CORE_ADDR capping_text;
+     struct partial_symtab **dependency_list;
+     int number_dependencies;
+{
+  int i;
+  struct objfile *objfile = pst->objfile;
+  int offset = ANOFFSET (pst->section_offsets, SECT_OFF_TEXT);
+
+#ifdef DUMPING
+  /* Turn on to see what kind of a psymtab we've built. */
+  static int dumping = 0;
+#endif
+
+  if (capping_symbol_offset != -1)
+    LDSYMLEN (pst) = capping_symbol_offset - LDSYMOFF (pst);
+  else
+    LDSYMLEN (pst) = 0;
+  pst->texthigh = capping_text + offset;
+
+  pst->n_global_syms =
+    objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+  pst->n_static_syms =
+    objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+#ifdef DUMPING
+  if (dumping)
+    {
+      printf ("\nPst %s, LDSYMOFF %x (%x), LDSYMLEN %x (%x), globals %d, statics %d\n",
+	      pst->filename,
+	      LDSYMOFF (pst),
+	      LDSYMOFF (pst) / sizeof (struct dntt_type_block),
+	      LDSYMLEN (pst),
+	      LDSYMLEN (pst) / sizeof (struct dntt_type_block),
+	      pst->n_global_syms, pst->n_static_syms);
+    }
+#endif
+
+  pst->number_of_dependencies = number_dependencies;
+  if (number_dependencies)
+    {
+      pst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       number_dependencies * sizeof (struct partial_symtab *));
+      memcpy (pst->dependencies, dependency_list,
+	      number_dependencies * sizeof (struct partial_symtab *));
+    }
+  else
+    pst->dependencies = 0;
+
+  for (i = 0; i < num_includes; i++)
+    {
+      struct partial_symtab *subpst =
+      allocate_psymtab (include_list[i], objfile);
+
+      subpst->section_offsets = pst->section_offsets;
+      subpst->read_symtab_private =
+	(char *) obstack_alloc (&objfile->psymbol_obstack,
+				sizeof (struct symloc));
+      LDSYMOFF (subpst) =
+	LDSYMLEN (subpst) =
+	subpst->textlow =
+	subpst->texthigh = 0;
+
+      /* We could save slight bits of space by only making one of these,
+         shared by the entire set of include files.  FIXME-someday.  */
+      subpst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       sizeof (struct partial_symtab *));
+      subpst->dependencies[0] = pst;
+      subpst->number_of_dependencies = 1;
+
+      subpst->globals_offset =
+	subpst->n_global_syms =
+	subpst->statics_offset =
+	subpst->n_static_syms = 0;
+
+      subpst->readin = 0;
+      subpst->symtab = 0;
+      subpst->read_symtab = pst->read_symtab;
+    }
+
+  sort_pst_symbols (pst);
+
+  /* If there is already a psymtab or symtab for a file of this name, remove it.
+     (If there is a symtab, more drastic things also happen.)
+     This happens in VxWorks.  */
+  free_named_symtabs (pst->filename);
+
+  if (num_includes == 0
+      && number_dependencies == 0
+      && pst->n_global_syms == 0
+      && pst->n_static_syms == 0)
+    {
+      /* Throw away this psymtab, it's empty.  We can't deallocate it, since
+         it is on the obstack, but we can forget to chain it on the list. 
+         Empty psymtabs happen as a result of header files which don't have
+         any symbols in them.  There can be a lot of them.  But this check
+         is wrong, in that a psymtab with N_SLINE entries but nothing else
+         is not empty, but we don't realize that.  Fixing that without slowing
+         things down might be tricky.
+         It's also wrong if we're using the quick look-up tables, as
+         we can get empty psymtabs from modules with no routines in
+         them. */
+
+      discard_psymtab (pst);
+
+      /* Indicate that psymtab was thrown away.  */
+      pst = (struct partial_symtab *) NULL;
+
+    }
+  return pst;
+}
+
+
+/* End of hp-psymtab-read.c */
+
+/* Set indentation to 4 spaces for Emacs; this file is
+   mostly non-GNU-ish in its style :-( */
+#if 0
+***Local Variables:
+***c - basic - offset:4
+*** End:
+#endif
+
+
diff --git a/gdb/hp-symtab-read.c b/gdb/hp-symtab-read.c
new file mode 100644
index 0000000..90d4a10
--- /dev/null
+++ b/gdb/hp-symtab-read.c
@@ -0,0 +1,3988 @@
+/* Read hp debug symbols and convert to internal format, for GDB.
+   Copyright 1993, 1996 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Written by the Center for Software Science at the University of Utah
+   and by Cygnus Support.  */
+
+/* Common include for hp-symtab-read.c and hp-psymtab-read.c.
+ * Note this has nested includes for a bunch of stuff.
+ */
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "hpread.h"
+#include "demangle.h"
+#include "complaints.h"
+
+
+
+
+static struct complaint  hpread_unhandled_end_common_complaint =
+{
+  "unhandled symbol in hp-symtab-read.c: DNTT_TYPE_COMMON/DNTT_TYPE_END.\n", 0, 0
+};
+
+static struct complaint  hpread_unhandled_type_complaint =
+{
+  "hpread_type_translate: unhandled type code.", 0, 0
+};
+
+static struct complaint  hpread_struct_complaint =
+{
+  "hpread_read_struct_type: expected SVAR type...", 0, 0
+};
+
+static struct complaint hpread_array_complaint =
+{
+  "error in hpread_array_type.", 0, 0
+};
+
+static struct complaint  hpread_type_lookup_complaint =
+{
+  "error in hpread_type_lookup().", 0, 0
+};
+
+
+static struct complaint  hpread_unexpected_end_complaint =
+{
+  "internal error in hp-symtab-read.c: Unexpected DNTT_TYPE_END kind.", 0, 0
+};
+
+static struct complaint hpread_tagdef_complaint  =
+{
+  "error processing class tagdef", 0, 0
+};
+
+static struct complaint  hpread_unhandled_common_complaint =
+{
+  "unhandled symbol in hp-symtab-read.c: DNTT_TYPE_COMMON.", 0, 0
+};
+
+static struct complaint  hpread_unhandled_blockdata_complaint =
+{
+  "unhandled symbol in hp-symtab-read.c: DNTT_TYPE_BLOCKDATA.", 0, 0
+};
+
+
+/* Forward procedure declarations */
+
+static unsigned long hpread_get_scope_start
+  PARAMS ((sltpointer, struct objfile *));
+
+static unsigned long hpread_get_line
+  PARAMS ((sltpointer, struct objfile *));
+
+static CORE_ADDR hpread_get_location
+  PARAMS ((sltpointer, struct objfile *));
+
+static void hpread_psymtab_to_symtab_1 
+  PARAMS ((struct partial_symtab *));
+
+void hpread_psymtab_to_symtab 
+  PARAMS ((struct partial_symtab *));
+
+static struct symtab *hpread_expand_symtab
+  PARAMS ((struct objfile *, int, int, CORE_ADDR, int,
+	   struct section_offsets *, char *));
+
+static int hpread_type_translate 
+  PARAMS ((dnttpointer));
+
+static struct type **hpread_lookup_type
+  PARAMS ((dnttpointer, struct objfile *));
+
+static struct type *hpread_alloc_type
+  PARAMS ((dnttpointer, struct objfile *));
+
+static struct type *hpread_read_enum_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_read_function_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *, int));
+
+static struct type *hpread_read_doc_function_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *, int));
+
+static struct type *hpread_read_struct_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_get_nth_template_arg
+  PARAMS ((struct objfile *, int));
+
+static struct type * hpread_read_templ_arg_type 
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *, char *));
+
+static struct type *hpread_read_set_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type * hpread_read_array_type 
+  PARAMS ((dnttpointer, union dnttentry *dn_bufp, struct objfile *objfile));
+
+static struct type *hpread_read_subrange_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type * hpread_type_lookup
+  PARAMS ((dnttpointer, struct objfile *));
+
+static sltpointer hpread_record_lines
+  PARAMS ((struct subfile *, sltpointer, sltpointer,
+	   struct objfile *, CORE_ADDR));
+
+static void hpread_process_one_debug_symbol
+  PARAMS ((union dnttentry *, char *, struct section_offsets *,
+	   struct objfile *, CORE_ADDR, int, char *, int, int * ));
+
+static int hpread_get_scope_depth
+  PARAMS ((union dnttentry *, struct objfile *, int));
+
+static void fix_static_member_physnames 
+  PARAMS ((struct type *, char *, struct objfile *));
+
+static void fixup_class_method_type
+  PARAMS ((struct type *, struct type *, struct objfile *));
+
+static void hpread_adjust_bitoffsets PARAMS ((struct type *, int));
+
+static dnttpointer hpread_get_next_skip_over_anon_unions
+  PARAMS ((int, dnttpointer, union dnttentry **, struct objfile *));
+
+/* Global to indicate presence of HP-compiled objects,
+   in particular, SOM executable file with SOM debug info 
+   Defined in symtab.c, used in hppa-tdep.c. */ 
+extern int hp_som_som_object_present;
+
+/* Static used to indicate a class type that requires a
+   fix-up of one of its method types */
+static struct type * fixup_class = NULL;
+
+/* Static used to indicate the method type that is to be
+   used to fix-up the type for fixup_class */
+static struct type * fixup_method = NULL;
+
+
+
+/* Get the nesting depth for the source line identified by INDEX.  */
+
+static unsigned long
+hpread_get_scope_start (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+
+  sl_bufp = hpread_get_slt (index, objfile);
+  return sl_bufp->sspec.backptr.dnttp.index;
+}
+
+/* Get the source line number the the line identified by INDEX.  */
+
+static unsigned long
+hpread_get_line (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+
+  sl_bufp = hpread_get_slt (index, objfile);
+  return sl_bufp->snorm.line;
+}
+
+/* Find the code address associated with a given sltpointer */
+
+static CORE_ADDR
+hpread_get_location (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+  int i;
+
+  /* code location of special sltentrys is determined from context */
+  sl_bufp = hpread_get_slt (index, objfile);
+
+  if (sl_bufp->snorm.sltdesc == SLT_END)
+    {
+      /* find previous normal sltentry and get address */
+      for (i = 0; ((sl_bufp->snorm.sltdesc != SLT_NORMAL) &&
+                   (sl_bufp->snorm.sltdesc != SLT_NORMAL_OFFSET) &&
+		   (sl_bufp->snorm.sltdesc != SLT_EXIT)); i++)
+	sl_bufp = hpread_get_slt (index - i, objfile);
+      if (sl_bufp->snorm.sltdesc == SLT_NORMAL_OFFSET)
+        return sl_bufp->snormoff.address;
+      else
+        return sl_bufp->snorm.address;
+    }
+
+  /* find next normal sltentry and get address */
+  for (i = 0; ((sl_bufp->snorm.sltdesc != SLT_NORMAL) &&
+	       (sl_bufp->snorm.sltdesc != SLT_NORMAL_OFFSET) &&
+               (sl_bufp->snorm.sltdesc != SLT_EXIT)); i++)
+    sl_bufp = hpread_get_slt (index + i, objfile);
+      if (sl_bufp->snorm.sltdesc == SLT_NORMAL_OFFSET)
+        return sl_bufp->snormoff.address;
+      else
+        return sl_bufp->snorm.address;
+}
+
+
+/* Return 1 if an HP debug symbol of type KIND has a name associated with
+ * it, else return 0. (This function is not currently used, but I'll
+ * leave it here in case it proves useful later on. - RT).
+ */
+
+int
+hpread_has_name (kind)
+     enum dntt_entry_type kind;
+{
+  switch (kind)
+    {
+    case DNTT_TYPE_SRCFILE:
+    case DNTT_TYPE_MODULE:
+    case DNTT_TYPE_FUNCTION:
+    case DNTT_TYPE_DOC_FUNCTION:
+    case DNTT_TYPE_ENTRY:
+    case DNTT_TYPE_IMPORT:
+    case DNTT_TYPE_LABEL:
+    case DNTT_TYPE_FPARAM:
+    case DNTT_TYPE_SVAR:
+    case DNTT_TYPE_DVAR:
+    case DNTT_TYPE_CONST:
+    case DNTT_TYPE_TYPEDEF:
+    case DNTT_TYPE_TAGDEF:
+    case DNTT_TYPE_MEMENUM:
+    case DNTT_TYPE_FIELD:
+    case DNTT_TYPE_SA:
+    case DNTT_TYPE_BLOCKDATA:
+    case DNTT_TYPE_MEMFUNC:
+    case DNTT_TYPE_DOC_MEMFUNC:
+      return 1;
+
+    case DNTT_TYPE_BEGIN:
+    case DNTT_TYPE_END:
+    case DNTT_TYPE_POINTER:
+    case DNTT_TYPE_ENUM:
+    case DNTT_TYPE_SET:
+    case DNTT_TYPE_ARRAY:
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+    case DNTT_TYPE_VARIANT:
+    case DNTT_TYPE_FILE:
+    case DNTT_TYPE_FUNCTYPE:
+    case DNTT_TYPE_SUBRANGE:
+    case DNTT_TYPE_WITH:
+    case DNTT_TYPE_COMMON:
+    case DNTT_TYPE_COBSTRUCT:
+    case DNTT_TYPE_XREF:
+    case DNTT_TYPE_MACRO:
+    case DNTT_TYPE_CLASS_SCOPE:
+    case DNTT_TYPE_REFERENCE:
+    case DNTT_TYPE_PTRMEM:
+    case DNTT_TYPE_PTRMEMFUNC:
+    case DNTT_TYPE_CLASS:
+    case DNTT_TYPE_GENFIELD:
+    case DNTT_TYPE_VFUNC:
+    case DNTT_TYPE_MEMACCESS:
+    case DNTT_TYPE_INHERITANCE:
+    case DNTT_TYPE_FRIEND_CLASS:
+    case DNTT_TYPE_FRIEND_FUNC:
+    case DNTT_TYPE_MODIFIER: 
+    case DNTT_TYPE_OBJECT_ID:
+    case DNTT_TYPE_TEMPLATE:
+    case DNTT_TYPE_TEMPLATE_ARG:
+    case DNTT_TYPE_FUNC_TEMPLATE:
+    case DNTT_TYPE_LINK:
+    /* DNTT_TYPE_DYN_ARRAY_DESC ? */
+    /* DNTT_TYPE_DESC_SUBRANGE ? */
+    /* DNTT_TYPE_BEGIN_EXT ? */
+    /* DNTT_TYPE_INLN ? */
+    /* DNTT_TYPE_INLN_LIST ? */
+    /* DNTT_TYPE_ALIAS ? */
+    default:
+      return 0;
+    }
+}
+
+/* Do the dirty work of reading in the full symbol from a partial symbol
+   table.  */
+
+static void
+hpread_psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *old_chain;
+  int i;
+
+  /* Get out quick if passed junk.  */
+  if (!pst)
+    return;
+
+  /* Complain if we've already read in this symbol table.  */
+  if (pst->readin)
+    {
+      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  /* Read in all partial symtabs on which this one is dependent */
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files that need to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...", pst->dependencies[i]->filename);
+	    wrap_here ("");	/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	hpread_psymtab_to_symtab_1 (pst->dependencies[i]);
+      }
+
+  /* If it's real...  */
+  if (LDSYMLEN (pst))
+    {
+      /* Init stuff necessary for reading in symbols */
+      buildsym_init ();
+      old_chain = make_cleanup (really_free_pendings, 0);
+
+      pst->symtab =
+	hpread_expand_symtab (pst->objfile, LDSYMOFF (pst), LDSYMLEN (pst),
+			      pst->textlow, pst->texthigh - pst->textlow,
+			      pst->section_offsets, pst->filename);
+      sort_symtab_syms (pst->symtab);
+
+      do_cleanups (old_chain);
+    }
+
+  pst->readin = 1;
+}
+
+/* Read in all of the symbols for a given psymtab for real.
+   Be verbose about it if the user wants that.  */
+
+void
+hpread_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  /* Get out quick if given junk.  */
+  if (!pst)
+    return;
+
+  /* Sanity check.  */
+  if (pst->readin)
+    {
+      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  /* elz: setting the flag to indicate that the code of the target
+     was compiled using an HP compiler (aCC, cc) 
+     the processing_acc_compilation variable is declared in the 
+     file buildsym.h, the HP_COMPILED_TARGET is defined to be equal
+     to 3 in the file tm_hppa.h*/
+
+  processing_gcc_compilation = 0;
+
+  if (LDSYMLEN (pst) || pst->number_of_dependencies)
+    {
+      /* Print the message now, before reading the string table,
+         to avoid disconcerting pauses.  */
+      if (info_verbose)
+	{
+	  printf_filtered ("Reading in symbols for %s...", pst->filename);
+	  gdb_flush (gdb_stdout);
+	}
+
+      hpread_psymtab_to_symtab_1 (pst);
+
+      /* Match with global symbols.  This only needs to be done once,
+         after all of the symtabs and dependencies have been read in.   */
+      scan_file_globals (pst->objfile);
+
+      /* Finish up the debug error message.  */
+      if (info_verbose)
+	printf_filtered ("done.\n");
+    }
+}
+
+/* Read in a defined section of a specific object file's symbols.
+
+   DESC is the file descriptor for the file, positioned at the
+   beginning of the symtab
+   SYM_OFFSET is the offset within the file of
+   the beginning of the symbols we want to read
+   SYM_SIZE is the size of the symbol info to read in.
+   TEXT_OFFSET is the beginning of the text segment we are reading symbols for
+   TEXT_SIZE is the size of the text segment read in.
+   SECTION_OFFSETS are the relocation offsets which get added to each symbol. */
+
+static struct symtab *
+hpread_expand_symtab (objfile, sym_offset, sym_size, text_offset, text_size,
+		      section_offsets, filename)
+     struct objfile *objfile;
+     int sym_offset;
+     int sym_size;
+     CORE_ADDR text_offset;
+     int text_size;
+     struct section_offsets *section_offsets;
+     char *filename;
+{
+  char            *namestring;
+  union dnttentry *dn_bufp;
+  unsigned         max_symnum;
+  int              at_module_boundary = 0;
+                   /* 1 => at end, -1 => at beginning */ 
+
+  int sym_index = sym_offset / sizeof (struct dntt_type_block);
+
+  current_objfile = objfile;
+  subfile_stack = 0;
+
+  last_source_file = 0;
+
+  /* Demangling style -- if EDG style already set, don't change it,
+     as HP style causes some problems with the KAI EDG compiler */ 
+  if (current_demangling_style != edg_demangling) {
+    /* Otherwise, ensure that we are using HP style demangling */ 
+    set_demangling_style (HP_DEMANGLING_STYLE_STRING);
+  }
+
+  dn_bufp = hpread_get_lntt (sym_index, objfile);
+  if (!((dn_bufp->dblock.kind == (unsigned char) DNTT_TYPE_SRCFILE) ||
+	(dn_bufp->dblock.kind == (unsigned char) DNTT_TYPE_MODULE)))
+    {
+      start_symtab ("globals", NULL, 0);
+      record_debugformat ("HP");
+    }
+
+  /* The psymtab builder (hp-psymtab-read.c) is the one that
+   * determined the "sym_size" argument (i.e. how many DNTT symbols
+   * are in this symtab), which we use to compute "max_symnum"
+   * (point in DNTT to which we read). 
+   *
+   * Perhaps this should be changed so that 
+   * process_one_debug_symbol() "knows" when
+   * to stop reading (based on reading from the MODULE to the matching
+   * END), and take out this reliance on a #-syms being passed in...
+   * (I'm worried about the reliability of this number). But I'll
+   * leave it as-is, for now. - RT
+   *
+   * The change above has been made. I've left the "for" loop control
+   * in to prepare for backing this out again. -JB
+   */
+  max_symnum = sym_size / sizeof (struct dntt_type_block);
+           /* No reason to multiply on pst side and divide on sym side... FIXME */
+
+  /* Read in and process each debug symbol within the specified range.
+   */
+  for (symnum = 0;
+       symnum < max_symnum;       
+       symnum++)
+    {
+      QUIT;			/* Allow this to be interruptable */
+      dn_bufp = hpread_get_lntt (sym_index + symnum, objfile);
+
+      if (dn_bufp->dblock.extension)
+	continue;
+
+      /* Yow!  We call SET_NAMESTRING on things without names!  */
+      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+
+      hpread_process_one_debug_symbol (dn_bufp, namestring, section_offsets,
+				       objfile, text_offset, text_size,
+				       filename, symnum + sym_index,
+                                      &at_module_boundary
+                                       );
+                                       
+      /* OLD COMMENTS: This routine is only called for psts.  All psts
+       * correspond to MODULES.  If we ever do lazy-reading of globals
+       * from the LNTT, then there will be a pst which ends when the
+       * LNTT ends, and not at an END MODULE entry.  Then we'll have
+       * to re-visit this break.  
+
+       if( at_end_of_module )
+           break;
+
+       */
+
+      /* We no longer break out of the loop when we reach the end of a
+         module. The reason is that with CTTI, the compiler can generate
+         function symbols (for template function instantiations) which are not
+         in any module; typically they show up beyond a module's end, and
+         before the next module's start.  We include them in the current
+         module.  However, we still don't trust the MAX_SYMNUM value from
+         the psymtab, so we break out if we enter a new module. */
+
+      if (at_module_boundary == -1)
+        break;
+    }
+
+  current_objfile = NULL;
+  hp_som_som_object_present = 1; /* Indicate we've processed an HP SOM SOM file */
+  
+  return end_symtab (text_offset + text_size, objfile, 0);
+}
+
+
+
+
+/* Convert basic types from HP debug format into GDB internal format.  */
+
+static int
+hpread_type_translate (typep)
+     dnttpointer typep;
+{
+  if (!typep.dntti.immediate) {
+    error ("error in hpread_type_translate\n.");
+    return;
+  }
+
+  switch (typep.dntti.type)
+    {
+    case HP_TYPE_BOOLEAN:
+    case HP_TYPE_BOOLEAN_S300_COMPAT:
+    case HP_TYPE_BOOLEAN_VAX_COMPAT:
+      return FT_BOOLEAN;
+    case HP_TYPE_CHAR:                /* C signed char, C++ plain char */
+ 
+    case HP_TYPE_WIDE_CHAR:
+      return FT_CHAR;
+    case HP_TYPE_INT:
+      if (typep.dntti.bitlength <= 8)
+	return FT_SIGNED_CHAR;         /* C++ signed char */
+      if (typep.dntti.bitlength <= 16)
+	return FT_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_INTEGER;
+      return FT_LONG_LONG;
+    case HP_TYPE_LONG:
+      if (typep.dntti.bitlength <= 8)
+	return FT_SIGNED_CHAR;           /* C++ signed char. */ 
+      return FT_LONG;
+    case HP_TYPE_UNSIGNED_LONG:
+      if (typep.dntti.bitlength <= 8)
+	return FT_UNSIGNED_CHAR;        /* C/C++ unsigned char */
+      if (typep.dntti.bitlength <= 16)
+	return FT_UNSIGNED_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_UNSIGNED_LONG;
+      return FT_UNSIGNED_LONG_LONG;
+    case HP_TYPE_UNSIGNED_INT:
+      if (typep.dntti.bitlength <= 8)
+	return FT_UNSIGNED_CHAR;
+      if (typep.dntti.bitlength <= 16)
+	return FT_UNSIGNED_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_UNSIGNED_INTEGER;
+      return FT_UNSIGNED_LONG_LONG;
+    case HP_TYPE_REAL:
+    case HP_TYPE_REAL_3000:
+    case HP_TYPE_DOUBLE:
+      if (typep.dntti.bitlength == 64)
+	return FT_DBL_PREC_FLOAT;
+      if (typep.dntti.bitlength == 128)
+	return FT_EXT_PREC_FLOAT;
+      return FT_FLOAT;
+    case HP_TYPE_COMPLEX:
+    case HP_TYPE_COMPLEXS3000:
+      if (typep.dntti.bitlength == 128)
+	return FT_DBL_PREC_COMPLEX;
+      if (typep.dntti.bitlength == 192)
+	return FT_EXT_PREC_COMPLEX;
+      return FT_COMPLEX;
+    case HP_TYPE_VOID:
+      return FT_VOID;
+    case HP_TYPE_STRING200:
+    case HP_TYPE_LONGSTRING200:
+    case HP_TYPE_FTN_STRING_SPEC:
+    case HP_TYPE_MOD_STRING_SPEC:
+    case HP_TYPE_MOD_STRING_3000:
+    case HP_TYPE_FTN_STRING_S300_COMPAT:
+    case HP_TYPE_FTN_STRING_VAX_COMPAT:
+      return FT_STRING;
+    case HP_TYPE_TEMPLATE_ARG:
+      return FT_TEMPLATE_ARG;
+    case HP_TYPE_TEXT:
+    case HP_TYPE_FLABEL:
+    case HP_TYPE_PACKED_DECIMAL:
+    case HP_TYPE_ANYPOINTER:  
+    case HP_TYPE_GLOBAL_ANYPOINTER:
+    case HP_TYPE_LOCAL_ANYPOINTER: 
+    default:
+      warning ("hpread_type_translate: unhandled type code.\n");
+      return FT_VOID;
+    }
+}
+
+/* Given a position in the DNTT, return a pointer to the 
+ * already-built "struct type" (if any), for the type defined 
+ * at that position.
+ */
+
+static struct type **
+hpread_lookup_type (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  unsigned old_len;
+  int index = hp_type.dnttp.index;
+  int size_changed = 0;
+
+  /* The immediate flag indicates this doesn't actually point to
+   * a type DNTT.
+   */
+  if (hp_type.dntti.immediate)
+    return NULL;
+
+  /* For each objfile, we maintain a "type vector".
+   * This an array of "struct type *"'s with one pointer per DNTT index.
+   * Given a DNTT index, we look in this array to see if we have
+   * already processed this DNTT and if it is a type definition.
+   * If so, then we can locate a pointer to the already-built
+   * "struct type", and not build it again.
+   * 
+   * The need for this arises because our DNTT-walking code wanders
+   * around. In particular, it will encounter the same type multiple
+   * times (once for each object of that type). We don't want to 
+   * built multiple "struct type"'s for the same thing.
+   *
+   * Having said this, I should point out that this type-vector is
+   * an expensive way to keep track of this. If most DNTT entries are 
+   * 3 words, the type-vector will be 1/3 the size of the DNTT itself.
+   * Alternative solutions:
+   * - Keep a compressed or hashed table. Less memory, but more expensive
+   *   to search and update.
+   * - (Suggested by JB): Overwrite the DNTT entry itself
+   *   with the info. Create a new type code "ALREADY_BUILT", and modify
+   *   the DNTT to have that type code and point to the already-built entry.
+   * -RT
+   */
+
+  if (index < LNTT_SYMCOUNT (objfile))
+    {
+      if (index >= TYPE_VECTOR_LENGTH (objfile))
+	{
+	  old_len = TYPE_VECTOR_LENGTH (objfile);
+
+          /* See if we need to allocate a type-vector. */
+	  if (old_len == 0)
+	    {
+              TYPE_VECTOR_LENGTH(objfile) = LNTT_SYMCOUNT (objfile) + GNTT_SYMCOUNT (objfile);
+	      TYPE_VECTOR (objfile) = (struct type **)
+		xmmalloc (objfile->md, TYPE_VECTOR_LENGTH (objfile) * sizeof (struct type *));
+	      memset (&TYPE_VECTOR (objfile)[old_len], 0,
+		        (TYPE_VECTOR_LENGTH (objfile) - old_len) *
+		        sizeof (struct type *));
+	    }
+
+          /* See if we need to resize type-vector. With my change to
+           * initially allocate a correct-size type-vector, this code
+           * should no longer trigger.
+           */
+	  while (index >= TYPE_VECTOR_LENGTH (objfile)) {
+	    TYPE_VECTOR_LENGTH (objfile) *= 2;
+            size_changed = 1;
+          }
+          if (size_changed) {
+	    TYPE_VECTOR (objfile) = (struct type **)
+	      xmrealloc (objfile -> md,
+                         (char *) TYPE_VECTOR (objfile),
+                         (TYPE_VECTOR_LENGTH (objfile) * sizeof (struct type *)));
+
+	      memset (&TYPE_VECTOR (objfile)[old_len], 0,
+		        (TYPE_VECTOR_LENGTH (objfile) - old_len) *
+		        sizeof (struct type *));
+          } 
+
+	}
+      return &TYPE_VECTOR (objfile)[index];
+    }
+  else
+    return NULL;
+}
+
+/* Possibly allocate a GDB internal type so we can internalize HP_TYPE.
+   Note we'll just return the address of a GDB internal type if we already
+   have it lying around.  */
+
+static struct type *
+hpread_alloc_type (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  struct type **type_addr;
+
+  type_addr = hpread_lookup_type (hp_type, objfile);
+  if (*type_addr == 0) {
+    *type_addr = alloc_type (objfile);
+
+    /* A hack - if we really are a C++ class symbol, then this default
+     * will get overriden later on.
+     */
+    TYPE_CPLUS_SPECIFIC (*type_addr)
+      = (struct cplus_struct_type *) &cplus_struct_default;
+  }
+
+  return *type_addr;
+}
+
+/* Read a native enumerated type and return it in GDB internal form.  */
+
+static struct type *
+hpread_read_enum_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct pending **symlist, *osyms, *syms;
+  struct pending *local_list = NULL;
+  int o_nsyms, nsyms = 0;
+  dnttpointer mem;
+  union dnttentry *memp;
+  char *name;
+  long n;
+  struct symbol *sym;
+
+  /* Allocate a GDB type. If we've already read in this enum type,
+   * it'll return the already built GDB type, so stop here.
+   * (Note: I added this check, to conform with what's done for 
+   *  struct, union, class.
+   *  I assume this is OK. - RT)
+   */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_ENUM)
+    return type;
+
+  /* HP C supports "sized enums", where a specifier such as "short" or
+     "char" can be used to get enums of different sizes. So don't assume
+     an enum is always 4 bytes long. pai/1997-08-21 */
+  TYPE_LENGTH (type) = dn_bufp->denum.bitlength / 8;
+
+  symlist = &file_symbols;
+  osyms = *symlist;
+  o_nsyms = osyms ? osyms->nsyms : 0;
+
+  /* Get a name for each member and add it to our list of members.  
+   * The list of "mem" SOM records we are walking should all be
+   * SOM type DNTT_TYPE_MEMENUM (not checked).
+   */
+  mem = dn_bufp->denum.firstmem;
+  while (mem.word && mem.word != DNTTNIL)
+    {
+      memp = hpread_get_lntt (mem.dnttp.index, objfile);
+
+      name = VT (objfile) + memp->dmember.name;
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = obsavestring (name, strlen (name), 
+					&objfile->symbol_obstack);
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_VALUE (sym) = memp->dmember.value;
+      add_symbol_to_list (sym, symlist);
+      nsyms++;
+      mem = memp->dmember.nextmem;
+    }
+
+  /* Now that we know more about the enum, fill in more info.  */
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the members and put them into the type.
+     The symbols can be found in the symlist that we put them on
+     to cause them to be defined.  osyms contains the old value
+     of that symlist; everything up to there was defined by us.
+
+     Note that we preserve the order of the enum constants, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+  for (syms = *symlist, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+      if (syms == osyms)
+	j = o_nsyms;
+      for (; j < syms->nsyms; j++, n++)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  SYMBOL_TYPE (xsym) = type;
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = SYMBOL_VALUE (xsym);
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+      if (syms == osyms)
+	break;
+    }
+
+  return type;
+}
+
+/* Read and internalize a native function debug symbol.  */
+
+static struct type *
+hpread_read_function_type (hp_type, dn_bufp, objfile, newblock)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+     int newblock;
+{
+  struct type *type, *type1;
+  struct pending *syms;
+  struct pending *local_list = NULL;
+  int nsyms = 0;
+  dnttpointer param;
+  union dnttentry *paramp;
+  char *name;
+  long n;
+  struct symbol *sym;
+  int record_args = 1;
+
+  /* See if we've already read in this type.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_FUNC)
+    {
+      record_args = 0; /* already read in, don't modify type */ 
+    }
+  else
+    {
+      /* Nope, so read it in and store it away.  */
+      if (dn_bufp->dblock.kind == DNTT_TYPE_FUNCTION ||
+          dn_bufp->dblock.kind == DNTT_TYPE_MEMFUNC)
+        type1 = lookup_function_type (hpread_type_lookup (dn_bufp->dfunc.retval,
+                                                          objfile));
+      else if (dn_bufp->dblock.kind == DNTT_TYPE_FUNCTYPE)
+        type1 = lookup_function_type (hpread_type_lookup (dn_bufp->dfunctype.retval,
+                                                          objfile));
+      else /* expect DNTT_TYPE_FUNC_TEMPLATE */
+        type1 = lookup_function_type (hpread_type_lookup (dn_bufp->dfunc_template.retval,
+                                                          objfile));
+      memcpy ((char *) type, (char *) type1, sizeof (struct type));
+      
+      /* Mark it -- in the middle of processing */ 
+      TYPE_FLAGS (type) |= TYPE_FLAG_INCOMPLETE;
+    }
+
+  /* Now examine each parameter noting its type, location, and a
+     wealth of other information.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_FUNCTION ||
+      dn_bufp->dblock.kind == DNTT_TYPE_MEMFUNC)
+    param = dn_bufp->dfunc.firstparam;
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_FUNCTYPE)
+    param = dn_bufp->dfunctype.firstparam;
+  else /* expect DNTT_TYPE_FUNC_TEMPLATE */
+    param = dn_bufp->dfunc_template.firstparam;
+  while (param.word && param.word != DNTTNIL)
+    {
+      paramp = hpread_get_lntt (param.dnttp.index, objfile);
+      nsyms++;
+      param = paramp->dfparam.nextparam;
+
+      /* Get the name.  */
+      name = VT (objfile) + paramp->dfparam.name;
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      (void) memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = obsavestring (name, strlen (name),
+					&objfile->symbol_obstack);
+
+      /* Figure out where it lives.  */
+      if (paramp->dfparam.regparam)
+	SYMBOL_CLASS (sym) = LOC_REGPARM;
+      else if (paramp->dfparam.indirect)
+	SYMBOL_CLASS (sym) = LOC_REF_ARG;
+      else
+	SYMBOL_CLASS (sym) = LOC_ARG;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (paramp->dfparam.copyparam)
+	{
+	  SYMBOL_VALUE (sym) = paramp->dfparam.location ;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+	  SYMBOL_VALUE (sym)
+	    += HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+	  /* This is likely a pass-by-invisible reference parameter,
+	     Hack on the symbol class to make GDB happy.  */
+          /* ??rehrauer: This appears to be broken w/r/t to passing
+             C values of type float and struct.  Perhaps this ought
+             to be highighted as a special case, but for now, just
+             allowing these to be LOC_ARGs seems to work fine.
+             */
+#if 0
+	  SYMBOL_CLASS (sym) = LOC_REGPARM_ADDR;
+#endif
+	}
+      else
+	SYMBOL_VALUE (sym) = paramp->dfparam.location;
+
+      /* Get its type.  */
+      SYMBOL_TYPE (sym) = hpread_type_lookup (paramp->dfparam.type, objfile);
+      /* Add it to the symbol list.  */
+      /* Note 1 (RT) At the moment, add_symbol_to_list() is also being
+       * called on FPARAM symbols from the process_one_debug_symbol()
+       * level... so parameters are getting added twice! (this shows
+       * up in the symbol dump you get from "maint print symbols ...").
+       * Note 2 (RT) I took out the processing of FPARAM from the 
+       * process_one_debug_symbol() level, so at the moment parameters are only
+       * being processed here. This seems to have no ill effect.
+       */
+      /* Note 3 (pai/1997-08-11) I removed the add_symbol_to_list() which put
+         each fparam on the local_symbols list from here.  Now we use the
+         local_list to which fparams are added below, and set the param_symbols
+         global to point to that at the end of this routine. */ 
+      /* elz: I added this new list of symbols which is local to the function.
+         this list is the one which is actually used to build the type for the
+         function rather than the gloabal list pointed to by symlist.
+         Using a global list to keep track of the parameters is wrong, because 
+         this function is called recursively if one parameter happend to be
+         a function itself with more parameters in it. Adding parameters to the
+         same global symbol list would not work!      
+         Actually it did work in case of cc compiled programs where you do 
+         not check the parameter lists of the arguments. */ 
+      add_symbol_to_list (sym, &local_list);
+
+    }
+
+  /* If type was read in earlier, don't bother with modifying
+     the type struct */ 
+  if (!record_args)
+    goto finish;
+  
+  /* Note how many parameters we found.  */
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack,
+		   sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the parameters and 
+     use them to fill parameter-type information into the function-type.
+     The parameter symbols can be found in the local_list that we just put them on. */
+  /* Note that we preserve the order of the parameters, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+  
+  /* get the parameters types from the local list not the global list
+     so that the type can be correctly constructed for functions which
+     have function as parameters */
+  for (syms = local_list, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+      for (j=0; j < syms->nsyms; j++, n++)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_TYPE (type, n) = SYMBOL_TYPE (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = n;
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+    }
+  /* Mark it as having been processed */ 
+  TYPE_FLAGS (type) &= ~(TYPE_FLAG_INCOMPLETE);
+
+  /* Check whether we need to fix-up a class type with this function's type */
+  if (fixup_class && (fixup_method == type))
+    {
+      fixup_class_method_type (fixup_class, fixup_method, objfile);
+      fixup_class = NULL;
+      fixup_method = NULL;
+    }
+
+  /* Set the param list of this level of the context stack
+     to our local list.  Do this only if this function was
+     called for creating a new block, and not if it was called
+     simply to get the function type. This prevents recursive
+     invocations from trashing param_symbols. */
+finish:  
+  if (newblock)
+    param_symbols = local_list;
+  
+   return type;
+}
+
+
+/* Read and internalize a native DOC function debug symbol.  */
+/* This is almost identical to hpread_read_function_type(), except
+ * for references to dn_bufp->ddocfunc instead of db_bufp->dfunc.
+ * Since debug information for DOC functions is more likely to be
+ * volatile, please leave it this way.
+ */
+static struct type *
+hpread_read_doc_function_type (hp_type, dn_bufp, objfile, newblock)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+     int newblock;
+{
+  struct type *type, *type1;
+  struct pending *syms;
+  struct pending *local_list = NULL;
+  int nsyms = 0;
+  dnttpointer param;
+  union dnttentry *paramp;
+  char *name;
+  long n;
+  struct symbol *sym;
+  int record_args = 1;
+
+  /* See if we've already read in this type.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_FUNC)
+    {
+      record_args = 0; /* already read in, don't modify type */ 
+    }
+  else
+    {
+      /* Nope, so read it in and store it away.  */
+      if (dn_bufp->dblock.kind == DNTT_TYPE_DOC_FUNCTION ||
+          dn_bufp->dblock.kind == DNTT_TYPE_DOC_MEMFUNC)
+        type1 = lookup_function_type (hpread_type_lookup (dn_bufp->ddocfunc.retval,
+                                                          objfile));
+      memcpy ((char *) type, (char *) type1, sizeof (struct type));
+      
+      /* Mark it -- in the middle of processing */ 
+      TYPE_FLAGS (type) |= TYPE_FLAG_INCOMPLETE;
+    }
+
+  /* Now examine each parameter noting its type, location, and a
+     wealth of other information.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_DOC_FUNCTION ||
+      dn_bufp->dblock.kind == DNTT_TYPE_DOC_MEMFUNC)
+    param = dn_bufp->ddocfunc.firstparam;
+  while (param.word && param.word != DNTTNIL)
+    {
+      paramp = hpread_get_lntt (param.dnttp.index, objfile);
+      nsyms++;
+      param = paramp->dfparam.nextparam;
+
+      /* Get the name.  */
+      name = VT (objfile) + paramp->dfparam.name;
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      (void) memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = name;
+
+      /* Figure out where it lives.  */
+      if (paramp->dfparam.regparam)
+	SYMBOL_CLASS (sym) = LOC_REGPARM;
+      else if (paramp->dfparam.indirect)
+	SYMBOL_CLASS (sym) = LOC_REF_ARG;
+      else
+	SYMBOL_CLASS (sym) = LOC_ARG;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (paramp->dfparam.copyparam)
+	{
+	  SYMBOL_VALUE (sym) = paramp->dfparam.location ;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+	  SYMBOL_VALUE (sym)
+	    += HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+	  /* This is likely a pass-by-invisible reference parameter,
+	     Hack on the symbol class to make GDB happy.  */
+          /* ??rehrauer: This appears to be broken w/r/t to passing
+             C values of type float and struct.  Perhaps this ought
+             to be highighted as a special case, but for now, just
+             allowing these to be LOC_ARGs seems to work fine.
+             */
+#if 0
+	  SYMBOL_CLASS (sym) = LOC_REGPARM_ADDR;
+#endif
+	}
+      else
+	SYMBOL_VALUE (sym) = paramp->dfparam.location;
+
+      /* Get its type.  */
+      SYMBOL_TYPE (sym) = hpread_type_lookup (paramp->dfparam.type, objfile);
+      /* Add it to the symbol list.  */
+      /* Note 1 (RT) At the moment, add_symbol_to_list() is also being
+       * called on FPARAM symbols from the process_one_debug_symbol()
+       * level... so parameters are getting added twice! (this shows
+       * up in the symbol dump you get from "maint print symbols ...").
+       * Note 2 (RT) I took out the processing of FPARAM from the 
+       * process_one_debug_symbol() level, so at the moment parameters are only
+       * being processed here. This seems to have no ill effect.
+       */
+      /* Note 3 (pai/1997-08-11) I removed the add_symbol_to_list() which put
+         each fparam on the local_symbols list from here.  Now we use the
+         local_list to which fparams are added below, and set the param_symbols
+         global to point to that at the end of this routine. */ 
+         
+      /* elz: I added this new list of symbols which is local to the function.
+         this list is the one which is actually used to build the type for the
+         function rather than the gloabal list pointed to by symlist.
+         Using a global list to keep track of the parameters is wrong, because 
+         this function is called recursively if one parameter happend to be
+         a function itself with more parameters in it. Adding parameters to the
+         same global symbol list would not work!      
+         Actually it did work in case of cc compiled programs where you do not check the
+         parameter lists of the arguments.  */
+      add_symbol_to_list (sym, &local_list);
+    }
+
+  /* If type was read in earlier, don't bother with modifying
+     the type struct */ 
+  if (!record_args)
+    goto finish;
+  
+  /* Note how many parameters we found.  */
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack,
+                   sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the parameters and 
+     use them to fill parameter-type information into the function-type.
+     The parameter symbols can be found in the local_list that we just put them on. */
+  /* Note that we preserve the order of the parameters, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+  
+  /* get the parameters types from the local list not the global list
+     so that the type can be correctly constructed for functions which
+     have function as parameters
+  */
+  for (syms = local_list, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+      for (j = 0; j < syms->nsyms; j++, n++)
+        {
+          struct symbol *xsym = syms->symbol[j];
+          TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+          TYPE_FIELD_TYPE (type, n) = SYMBOL_TYPE (xsym);
+          TYPE_FIELD_BITPOS (type, n) = n;
+          TYPE_FIELD_BITSIZE (type, n) = 0;
+        }
+    }
+  
+  /* Mark it as having been processed */ 
+  TYPE_FLAGS (type) &= ~(TYPE_FLAG_INCOMPLETE);
+
+  /* Check whether we need to fix-up a class type with this function's type */
+  if (fixup_class && (fixup_method == type))
+    {
+      fixup_class_method_type (fixup_class, fixup_method, objfile);
+      fixup_class = NULL;
+      fixup_method = NULL;
+    }
+
+  /* Set the param list of this level of the context stack
+     to our local list.  Do this only if this function was
+     called for creating a new block, and not if it was called
+     simply to get the function type. This prevents recursive
+     invocations from trashing param_symbols. */
+finish:  
+  if (newblock)
+    param_symbols = local_list;
+  
+  return type;
+}
+
+
+
+/* A file-level variable which keeps track of the current-template
+ * being processed. Set in hpread_read_struct_type() while processing
+ * a template type. Referred to in hpread_get_nth_templ_arg().
+ * Yes, this is a kludge, but it arises from the kludge that already
+ * exists in symtab.h, namely the fact that they encode
+ * "template argument n" with fundamental type FT_TEMPLATE_ARG and
+ * bitlength n. This means that deep in processing fundamental types
+ * I need to ask the question "what template am I in the middle of?".
+ * The alternative to stuffing a global would be to pass an argument
+ * down the chain of calls just for this purpose.
+ * 
+ * There may be problems handling nested templates... tough.
+ */
+static struct type * current_template = NULL;
+
+/* Read in and internalize a structure definition.  
+ * This same routine is called for struct, union, and class types.
+ * Also called for templates, since they build a very similar
+ * type entry as for class types.
+ */
+
+static struct type *
+hpread_read_struct_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  /* The data members get linked together into a list of struct nextfield's */
+  struct nextfield
+    {
+      struct nextfield *next;
+      struct field field;
+      unsigned char attributes; /* store visibility and virtuality info */
+#     define ATTR_VIRTUAL 1      
+#     define ATTR_PRIVATE 2      
+#     define ATTR_PROTECT 3      
+    };
+
+
+  /* The methods get linked together into a list of struct next_fn_field's */
+  struct next_fn_field
+    {
+      struct next_fn_field *next;
+      struct fn_fieldlist field;
+      struct fn_field fn_field;
+      int num_fn_fields;
+     };
+
+  /* The template args get linked together into a list of struct next_template's */
+  struct next_template
+    {
+      struct next_template *next;
+      struct template_arg arg;
+    };
+
+  /* The template instantiations get linked together into a list of these... */
+  struct next_instantiation 
+    {
+      struct next_instantiation * next;
+      struct type * t;
+    };
+
+  struct type *type;
+  struct type *baseclass;
+  struct type *memtype;
+  struct nextfield *list = 0, *tmp_list = 0;
+  struct next_fn_field *fn_list = 0;
+  struct next_fn_field *fn_p;
+  struct next_template *t_new, *t_list = 0;
+  struct nextfield *new;
+  struct next_fn_field *fn_new;
+  struct next_instantiation *i_new, *i_list = 0;
+  int n, nfields = 0, n_fn_fields = 0, n_fn_fields_total = 0;
+  int n_base_classes = 0, n_templ_args = 0;
+  int ninstantiations = 0;
+  dnttpointer field, fn_field, parent;
+  union dnttentry *fieldp, *fn_fieldp, *parentp;
+  int i;
+  int static_member = 0;
+  int const_member = 0;
+  int volatile_member = 0;
+  unsigned long vtbl_offset;
+  int need_bitvectors = 0;
+  char * method_name = NULL;
+  char * method_alias = NULL;
+  
+
+  /* Is it something we've already dealt with?  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if ((TYPE_CODE (type) == TYPE_CODE_STRUCT) ||
+      (TYPE_CODE (type) == TYPE_CODE_UNION) ||
+      (TYPE_CODE (type) == TYPE_CODE_CLASS) ||
+      (TYPE_CODE (type) == TYPE_CODE_TEMPLATE))
+      return type;
+
+  /* Get the basic type correct.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_STRUCT)
+    {
+      TYPE_CODE (type) = TYPE_CODE_STRUCT;
+      TYPE_LENGTH (type) = dn_bufp->dstruct.bitlength / 8;
+    }
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_UNION)
+    {
+      TYPE_CODE (type) = TYPE_CODE_UNION;
+      TYPE_LENGTH (type) = dn_bufp->dunion.bitlength / 8;
+    }
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS)
+    {
+      TYPE_CODE (type) = TYPE_CODE_CLASS; 
+      TYPE_LENGTH (type) = dn_bufp->dclass.bitlength / 8;
+
+      /* Overrides the TYPE_CPLUS_SPECIFIC(type) with allocated memory
+       * rather than &cplus_struct_default.
+       */
+      allocate_cplus_struct_type(type);
+
+      /* Fill in declared-type.
+       * (The C++ compiler will emit TYPE_CODE_CLASS 
+       * for all 3 of "class", "struct"
+       * "union", and we have to look at the "class_decl" field if we
+       * want to know how it was really declared)
+       */
+      /* (0==class, 1==union, 2==struct) */
+      TYPE_DECLARED_TYPE(type) = dn_bufp->dclass.class_decl;
+    }
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE)
+    {
+      /* Get the basic type correct.  */
+      TYPE_CODE (type) = TYPE_CODE_TEMPLATE; 
+      allocate_cplus_struct_type(type);
+      TYPE_DECLARED_TYPE(type) = DECLARED_TYPE_TEMPLATE;
+    }
+  else
+    return type;
+
+
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+
+  /* For classes, read the parent list.
+   * Question (RT): Do we need to do this for templates also?
+   */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS) {
+
+    /* First read the parent-list (classes from which we derive fields) */
+    parent = dn_bufp->dclass.parentlist;
+    while (parent.word && parent.word != DNTTNIL) {
+      parentp = hpread_get_lntt (parent.dnttp.index, objfile);
+
+      /* "parentp" should point to a DNTT_TYPE_INHERITANCE record */
+
+      /* Get space to record the next field/data-member. */
+      new = (struct nextfield *) alloca (sizeof (struct nextfield));
+      new->next = list;
+      list = new;
+
+      FIELD_BITSIZE (list->field) = 0;
+
+      /* The "classname" field is actually a DNTT pointer to the base class */
+      baseclass = hpread_type_lookup (parentp->dinheritance.classname, 
+  					     objfile);
+      FIELD_TYPE (list->field) = baseclass;
+
+      list->field.name = type_name_no_tag(FIELD_TYPE (list->field));
+
+      list->attributes = 0;
+
+      /* Check for virtuality of base, and set the
+       * offset of the base subobject within the object.
+       * (Offset set to -1 for virtual bases (for now).)
+       */
+      if (parentp->dinheritance.Virtual)
+        {
+	  B_SET(&(list->attributes), ATTR_VIRTUAL);
+          parentp->dinheritance.offset = -1;
+        }
+      else
+        FIELD_BITPOS (list->field) = parentp->dinheritance.offset;
+
+      /* Check visibility */
+      switch (parentp->dinheritance.visibility)
+        {
+          case 1:
+            B_SET(&(list->attributes), ATTR_PROTECT);
+            break;
+          case 2:
+            B_SET(&(list->attributes), ATTR_PRIVATE);
+            break;
+        }
+      
+      n_base_classes++;
+      nfields++;
+
+      parent = parentp->dinheritance.next;
+    }
+  }
+
+  /* For templates, read the template argument list.
+   * This must be done before processing the member list, because
+   * the member list may refer back to this. E.g.:
+   *   template <class T1, class T2> class q2 {
+   *     public:
+   *     T1 a;
+   *     T2 b;
+   *   };
+   * We need to read the argument list "T1", "T2" first.
+   */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE) {
+    /* Kludge alert: This stuffs a global "current_template" which
+     * is referred to by hpread_get_nth_templ_arg(). The global
+     * is cleared at the end of this routine.
+     */
+    current_template = type;
+
+    /* Read in the argument list */
+    field = dn_bufp->dtemplate.arglist;
+    while (field.word && field.word != DNTTNIL) {
+      /* Get this template argument*/
+      fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+      if (fieldp->dblock.kind != DNTT_TYPE_TEMPLATE_ARG)
+        {
+          warning ("Invalid debug info: Template argument entry is of wrong kind");
+          break;
+        }
+      /* Bump the count */ 
+      n_templ_args++;
+      /* Allocate and fill in a struct next_template */
+      t_new = (struct next_template *) alloca (sizeof (struct next_template));
+      t_new->next = t_list;
+      t_list = t_new;
+      t_list->arg.name = VT (objfile) + fieldp->dtempl_arg.name;
+      t_list->arg.type = hpread_read_templ_arg_type(field, fieldp, 
+                                                    objfile, t_list->arg.name);
+      /* Walk to the next template argument */
+      field = fieldp->dtempl_arg.nextarg;
+    }
+  }
+
+  TYPE_NTEMPLATE_ARGS(type) = n_templ_args;
+
+  if (n_templ_args > 0)
+    TYPE_TEMPLATE_ARGS(type) = (struct template_arg *)
+      obstack_alloc (&objfile->type_obstack, sizeof (struct template_arg) * n_templ_args);
+  for (n = n_templ_args; t_list; t_list = t_list->next)
+    {
+      n -= 1;
+      TYPE_TEMPLATE_ARG(type, n) = t_list->arg;
+    }
+
+  /* Next read in and internalize all the fields/members.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_STRUCT)
+    field = dn_bufp->dstruct.firstfield;
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_UNION)
+    field = dn_bufp->dunion.firstfield;
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS)
+    field = dn_bufp->dclass.memberlist;
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE)
+    field = dn_bufp->dtemplate.memberlist;
+  else
+    field.word = DNTTNIL;
+
+  while (field.word && field.word != DNTTNIL)
+    {
+      fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+
+      /* At this point "fieldp" may point to either a DNTT_TYPE_FIELD
+       * or a DNTT_TYPE_GENFIELD record. 
+       */
+      vtbl_offset = 0;
+      static_member = 0;
+      const_member = 0;
+      volatile_member = 0;
+       
+      if (fieldp->dblock.kind == DNTT_TYPE_GENFIELD) {
+
+        /* The type will be GENFIELD if the field is a method or
+         * a static member (or some other cases -- see below)
+         */
+
+        /* Follow a link to get to the record for the field. */
+        fn_field = fieldp->dgenfield.field;
+        fn_fieldp = hpread_get_lntt(fn_field.dnttp.index, objfile);
+
+        /* Virtual funcs are indicated by a VFUNC which points to the
+         * real entry
+         */
+        if (fn_fieldp->dblock.kind == DNTT_TYPE_VFUNC) {
+          vtbl_offset = fn_fieldp->dvfunc.vtbl_offset;
+          fn_field = fn_fieldp->dvfunc.funcptr;
+          fn_fieldp = hpread_get_lntt(fn_field.dnttp.index, objfile);
+        }
+
+        /* A function's entry may be preceded by a modifier which
+         * labels it static/constant/volatile.
+         */
+        if (fn_fieldp->dblock.kind == DNTT_TYPE_MODIFIER) {
+          static_member = fn_fieldp->dmodifier.m_static;
+          const_member = fn_fieldp->dmodifier.m_const;
+          volatile_member = fn_fieldp->dmodifier.m_volatile;
+          fn_field = fn_fieldp->dmodifier.type;
+          fn_fieldp = hpread_get_lntt(fn_field.dnttp.index, objfile);
+        }
+
+        /* Check whether we have a method */
+        if ((fn_fieldp->dblock.kind == DNTT_TYPE_MEMFUNC) ||
+            (fn_fieldp->dblock.kind == DNTT_TYPE_FUNCTION) ||
+            (fn_fieldp->dblock.kind == DNTT_TYPE_DOC_MEMFUNC) ||
+            (fn_fieldp->dblock.kind == DNTT_TYPE_DOC_FUNCTION)) {
+          /* Method found */
+
+          short ix = 0;
+
+          /* Look up function type of method */
+	  memtype = hpread_type_lookup (fn_field, objfile);
+
+          /* Methods can be seen before classes in the SOM records.
+             If we are processing this class because it's a parameter of a
+             method, at this point the method's type is actually incomplete;
+             we'll have to fix it up later; mark the class for this. */ 
+             
+          if (TYPE_INCOMPLETE (memtype))
+            {
+              TYPE_FLAGS (type) |= TYPE_FLAG_INCOMPLETE;
+              if (fixup_class)
+                warning ("Two classes to fix up for method??  Type information may be incorrect for some classes.");
+              if (fixup_method)
+                warning ("Two methods to be fixed up at once?? Type information may be incorrect for some classes.");
+              fixup_class = type;     /* remember this class has to be fixed up */
+              fixup_method = memtype; /* remember the method type to be used in fixup */ 
+            }
+
+          /* HP aCC generates operator names without the "operator" keyword, and
+             generates null strings as names for operators that are 
+             user-defined type conversions to basic types (e.g. operator int ()).
+             So try to reconstruct name as best as possible. */
+
+          method_name = (char *) (VT (objfile) + fn_fieldp->dfunc.name);
+          method_alias = (char *) (VT (objfile) + fn_fieldp->dfunc.alias);
+
+          if (!method_name ||                               /* no name */ 
+              !*method_name ||                              /* or null name */ 
+              cplus_mangle_opname (method_name, DMGL_ANSI)) /* or name is an operator like "<" */ 
+            {
+              char * tmp_name = cplus_demangle (method_alias, DMGL_ANSI);
+              char * op_string = strstr (tmp_name, "operator");
+              method_name = xmalloc (strlen (op_string) + 1); /* don't overwrite VT! */ 
+              strcpy (method_name, op_string);
+            }
+                        
+          /* First check if a method of the same name has already been seen. */
+          fn_p = fn_list;
+          while (fn_p)
+            {
+              if (STREQ (fn_p->field.name, method_name))
+                break;
+              fn_p = fn_p->next;
+            }
+
+          /* If no such method was found, allocate a new entry in the list */ 
+          if (!fn_p)
+            {
+              /* Get space to record this member function */
+              /* Note: alloca used; this will disappear on routine exit */
+              fn_new = (struct next_fn_field *) alloca (sizeof (struct next_fn_field));
+              fn_new->next = fn_list;
+              fn_list = fn_new;
+
+              /* Fill in the fields of the struct nextfield */
+          
+              /* Record the (unmangled) method name */
+              fn_list->field.name = method_name;
+              /* Initial space for overloaded methods */
+              /* Note: xmalloc is used; this will persist after this routine exits */ 
+              fn_list->field.fn_fields = (struct fn_field *) xmalloc (5 * (sizeof (struct fn_field)));
+              fn_list->field.length = 1; /* Init # of overloaded instances */ 
+              fn_list->num_fn_fields = 5; /* # of entries for which space allocated */
+              fn_p = fn_list;
+              ix = 0; /* array index for fn_field */ 
+              /* Bump the total count of the distinctly named methods */
+              n_fn_fields++;
+            }
+          else /* Another overloaded instance of an already seen method name */
+            {
+              if (++(fn_p->field.length) > fn_p->num_fn_fields)
+                {
+                  /* Increase space allocated for overloaded instances */ 
+                  fn_p->field.fn_fields
+                    = (struct fn_field *) xrealloc (fn_p->field.fn_fields,
+                                                     (fn_p->num_fn_fields + 5) * sizeof (struct fn_field));
+                  fn_p->num_fn_fields += 5;
+                }
+              ix = fn_p->field.length -1;  /* array index for fn_field */
+            }
+          
+          /* "physname" is intended to be the name of this overloaded instance. */
+          if ((fn_fieldp->dfunc.language == HP_LANGUAGE_CPLUSPLUS) && 
+	      method_alias && 
+              *method_alias) /* not a null string */
+            fn_p->field.fn_fields[ix].physname = method_alias;
+	  else
+            fn_p->field.fn_fields[ix].physname = method_name;
+          /* What's expected here is the function type */
+   /* But mark it as NULL if the method was incompletely processed
+             We'll fix this up later when the method is fully processed */
+          if (TYPE_INCOMPLETE (memtype))
+            {
+              fn_p->field.fn_fields[ix].type = NULL;
+              fn_p->field.fn_fields[ix].args = NULL;
+            }
+          else
+            {
+              fn_p->field.fn_fields[ix].type = memtype;
+
+              /* The argument list */
+              fn_p->field.fn_fields[ix].type->type_specific.arg_types =
+                (struct type **) obstack_alloc(&objfile->type_obstack,
+                                               sizeof(struct type *) * (memtype->nfields + 1));
+              for (i = 0; i < memtype->nfields; i++) 
+                fn_p->field.fn_fields[ix].type->type_specific.arg_types[i] = memtype->fields[i].type;
+              /* void termination */ 
+              fn_p->field.fn_fields[ix].type->type_specific.arg_types[memtype->nfields] = builtin_type_void;
+
+              /* pai: It's not clear why this args field has to be set.  Perhaps
+               * it should be eliminated entirely. */
+              fn_p->field.fn_fields[ix].args =
+                (struct type **) obstack_alloc(&objfile->type_obstack,
+                                               sizeof(struct type *) * (memtype->nfields + 1));
+              for (i = 0; i < memtype->nfields; i++)
+                fn_p->field.fn_fields[ix].args[i] = memtype->fields[i].type;
+              /* null-terminated, unlike arg_types above e*/ 
+              fn_p->field.fn_fields[ix].args[memtype->nfields] = NULL;
+            }
+          /* For virtual functions, fill in the voffset field with the
+           * virtual table offset. (This is just copied over from the
+           * SOM record; not sure if it is what GDB expects here...).
+           * But if the function is a static method, set it to 1.
+           * 
+           * Note that we have to add 1 because 1 indicates a static
+           * method, and 0 indicates a non-static, non-virtual method */
+
+          if (static_member)
+            fn_p->field.fn_fields[ix].voffset = VOFFSET_STATIC;
+          else
+            fn_p->field.fn_fields[ix].voffset = vtbl_offset ? vtbl_offset + 1 : 0;
+
+          /* Also fill in the fcontext field with the current
+           * class. (The latter isn't quite right: should be the baseclass
+           * that defines the virtual function... Note we do have
+           * a variable "baseclass" that we could stuff into the fcontext
+           * field, but "baseclass" isn't necessarily right either,
+           * since the virtual function could have been defined more
+           * than one level up).
+           */
+
+          if (vtbl_offset != 0)
+            fn_p->field.fn_fields[ix].fcontext = type;
+          else
+            fn_p->field.fn_fields[ix].fcontext = NULL;
+
+          /* Other random fields pertaining to this method */
+          fn_p->field.fn_fields[ix].is_const = const_member;
+          fn_p->field.fn_fields[ix].is_volatile = volatile_member; /* ?? */ 
+          switch (fieldp->dgenfield.visibility) {
+            case 1:
+              fn_p->field.fn_fields[ix].is_protected = 1;
+              fn_p->field.fn_fields[ix].is_private = 0;
+              break;
+            case 2:
+              fn_p->field.fn_fields[ix].is_protected = 0;
+              fn_p->field.fn_fields[ix].is_private = 1;
+              break;
+            default: /* public */
+              fn_p->field.fn_fields[ix].is_protected = 0;
+              fn_p->field.fn_fields[ix].is_private = 0;
+          }
+          fn_p->field.fn_fields[ix].is_stub = 0;
+
+          /* HP aCC emits both MEMFUNC and FUNCTION entries for a method;
+             if the class points to the FUNCTION, there is usually separate
+             code for the method; but if we have a MEMFUNC, the method has
+             been inlined (and there is usually no FUNCTION entry)
+             FIXME Not sure if this test is accurate. pai/1997-08-22 */ 
+          if ((fn_fieldp->dblock.kind == DNTT_TYPE_MEMFUNC) ||
+              (fn_fieldp->dblock.kind == DNTT_TYPE_DOC_MEMFUNC))
+            fn_p->field.fn_fields[ix].is_inlined = 1;
+          else
+            fn_p->field.fn_fields[ix].is_inlined = 0;
+          
+          fn_p->field.fn_fields[ix].dummy = 0;
+          
+          /* Bump the total count of the member functions */
+          n_fn_fields_total++;
+
+        } else if (fn_fieldp->dblock.kind == DNTT_TYPE_SVAR) {
+          /* This case is for static data members of classes */ 
+          
+          /* pai:: FIXME -- check that "staticmem" bit is set */
+
+          /* Get space to record this static member */
+          new = (struct nextfield *) alloca (sizeof (struct nextfield));
+          new->next = list;
+          list = new;
+          
+          list->field.name = VT (objfile) + fn_fieldp->dsvar.name;
+          FIELD_BITSIZE (list->field) = -1; /* indicates static member */
+          SET_FIELD_PHYSNAME (list->field, 0);  /* initialize to empty */
+          memtype = hpread_type_lookup (fn_fieldp->dsvar.type, objfile);
+          
+          FIELD_TYPE (list->field) = memtype;
+          list->attributes = 0;
+          switch (fieldp->dgenfield.visibility) {
+            case 1:
+              B_SET(&(list->attributes), ATTR_PROTECT);
+              break;
+            case 2:
+              B_SET(&(list->attributes), ATTR_PRIVATE);
+              break;
+          }
+          nfields++;
+        }
+
+        else if (fn_fieldp->dblock.kind == DNTT_TYPE_FIELD)
+          {
+            /* FIELDs follow GENFIELDs for fields of anonymous unions.
+               Code below is replicated from the case for FIELDs further
+               below, except that fieldp is replaced by fn_fieldp */ 
+            if (!fn_fieldp->dfield.a_union)
+              warning ("Debug info inconsistent: FIELD of anonymous union doesn't have a_union bit set");
+            /* Get space to record the next field/data-member. */
+            new = (struct nextfield *) alloca (sizeof (struct nextfield));
+            new->next = list;
+            list = new;
+
+            list->field.name = VT (objfile) + fn_fieldp->dfield.name;
+            FIELD_BITPOS (list->field) = fn_fieldp->dfield.bitoffset;
+            if (fn_fieldp->dfield.bitlength % 8)
+              list->field.bitsize = fn_fieldp->dfield.bitlength;
+            else
+              list->field.bitsize = 0;
+
+            memtype = hpread_type_lookup (fn_fieldp->dfield.type, objfile);
+            list->field.type = memtype;
+            list->attributes = 0;
+            switch (fn_fieldp->dfield.visibility) {
+              case 1:
+                B_SET(&(list->attributes), ATTR_PROTECT);
+                break;
+              case 2:
+                B_SET(&(list->attributes), ATTR_PRIVATE);
+                break;
+            }
+            nfields++;
+          }
+        else if (fn_fieldp->dblock.kind == DNTT_TYPE_SVAR)
+          {
+            /* Field of anonymous union; union is not inside a class */
+            if (!fn_fieldp->dsvar.a_union)
+              warning ("Debug info inconsistent: SVAR field in anonymous union doesn't have a_union bit set");
+            /* Get space to record the next field/data-member. */
+            new = (struct nextfield *) alloca (sizeof (struct nextfield));
+            new->next = list;
+            list = new;
+
+            list->field.name = VT (objfile) + fn_fieldp->dsvar.name;
+            FIELD_BITPOS (list->field) = 0;  /* FIXME is this always true? */
+            FIELD_BITSIZE (list->field) = 0; /* use length from type */
+            memtype = hpread_type_lookup (fn_fieldp->dsvar.type, objfile);
+            list->field.type = memtype;
+            list->attributes = 0;
+            /* No info to set visibility -- always public */ 
+            nfields++;
+          }
+        else if (fn_fieldp->dblock.kind == DNTT_TYPE_DVAR)
+          {
+            /* Field of anonymous union; union is not inside a class */
+            if (!fn_fieldp->ddvar.a_union)
+              warning ("Debug info inconsistent: DVAR field in anonymous union doesn't have a_union bit set");
+            /* Get space to record the next field/data-member. */
+            new = (struct nextfield *) alloca (sizeof (struct nextfield));
+            new->next = list;
+            list = new;
+
+            list->field.name = VT (objfile) + fn_fieldp->ddvar.name;
+            FIELD_BITPOS (list->field) = 0;  /* FIXME is this always true? */
+            FIELD_BITSIZE (list->field) = 0; /* use length from type */ 
+            memtype = hpread_type_lookup (fn_fieldp->ddvar.type, objfile);
+            list->field.type = memtype;
+            list->attributes = 0;
+            /* No info to set visibility -- always public */ 
+            nfields++;
+          }
+        else { /* Not a method, nor a static data member, nor an anon union field */
+
+          /* This case is for miscellaneous type entries (local enums,
+             local function templates, etc.) that can be present
+             inside a class. */
+
+          /* Enums -- will be handled by other code that takes care
+             of DNTT_TYPE_ENUM; here we see only DNTT_TYPE_MEMENUM so
+             it's not clear we could have handled them here at all. */
+          /* FUNC_TEMPLATE: is handled by other code (??). */
+          /* MEMACCESS: modified access for inherited member. Not
+             sure what to do with this, ignoriing it at present. */ 
+
+          /* What other entries can appear following a GENFIELD which
+             we do not handle above?  (MODIFIER, VFUNC handled above.) */
+
+          if ((fn_fieldp->dblock.kind != DNTT_TYPE_MEMACCESS) &&
+              (fn_fieldp->dblock.kind != DNTT_TYPE_MEMENUM) &&
+              (fn_fieldp->dblock.kind != DNTT_TYPE_FUNC_TEMPLATE))
+            warning ("Internal error: Unexpected debug record kind %d found following DNTT_GENFIELD",
+                     fn_fieldp->dblock.kind);
+        }
+        /* walk to the next FIELD or GENFIELD */
+        field = fieldp->dgenfield.nextfield;
+
+      } 
+      else if (fieldp->dblock.kind == DNTT_TYPE_FIELD) {
+        
+        /* Ordinary structure/union/class field */
+        struct type * anon_union_type;
+
+        /* Get space to record the next field/data-member. */
+	new = (struct nextfield *) alloca (sizeof (struct nextfield));
+        new->next = list;
+        list = new;
+        
+        list->field.name = VT (objfile) + fieldp->dfield.name;
+
+
+        /* A FIELD by itself (without a GENFIELD) can also be a static member */
+        if (fieldp->dfield.staticmem)
+          {
+	    FIELD_BITPOS (list->field) = -1;
+	    FIELD_BITSIZE (list->field) = 0;
+          }
+        else /* Non-static data member */ 
+          {
+	    FIELD_BITPOS (list->field) = fieldp->dfield.bitoffset;
+	    if (fieldp->dfield.bitlength % 8)
+	      FIELD_BITSIZE (list->field) = fieldp->dfield.bitlength;
+	    else
+	      FIELD_BITSIZE (list->field) = 0;
+          }
+
+        memtype = hpread_type_lookup (fieldp->dfield.type, objfile);
+        FIELD_TYPE (list->field) = memtype;
+        list->attributes = 0;
+        switch (fieldp->dfield.visibility) {
+          case 1:
+            B_SET(&(list->attributes), ATTR_PROTECT);
+            break;
+          case 2:
+            B_SET(&(list->attributes), ATTR_PRIVATE);
+            break;
+        }
+        nfields++;
+
+
+        /* Note 1: First, we have to check if the current field is an anonymous
+           union. If it is, then *its* fields are threaded along in the
+           nextfield chain. :-( This was supposed to help debuggers, but is
+           really just a nuisance since we deal with anonymous unions anyway by
+           checking that the name is null.  So anyway, we skip over the fields
+           of the anonymous union. pai/1997-08-22 */
+        /* Note 2: In addition, the bitoffsets for the fields of the anon union
+           are relative to the enclosing struct, *NOT* relative to the anon
+           union!  This is an even bigger nuisance -- we have to go in and munge
+           the anon union's type information appropriately. pai/1997-08-22 */
+
+        /* Both tasks noted above are done by a separate function.  This takes us
+           to the next FIELD or GENFIELD, skipping anon unions, and recursively
+           processing intermediate types. */ 
+        field = hpread_get_next_skip_over_anon_unions (1, field, &fieldp, objfile);
+
+      } else {
+        /* neither field nor genfield ?? is this possible?? */
+        /* pai:: FIXME walk to the next -- how? */
+        warning ("Internal error: unexpected DNTT kind %d encountered as field of struct");
+        warning ("Skipping remaining fields of struct");
+        break; /* get out of loop of fields */ 
+      }
+    }
+
+  /* If it's a template, read in the instantiation list */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE) {
+    ninstantiations = 0;
+    field = dn_bufp->dtemplate.expansions;
+    while (field.word && field.word != DNTTNIL) {
+      fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+ 
+      /* The expansions or nextexp should point to a tagdef */
+      if (fieldp->dblock.kind != DNTT_TYPE_TAGDEF) 
+        break;
+
+      i_new = (struct next_instantiation *) alloca (sizeof (struct next_instantiation)); 
+      i_new->next = i_list;
+      i_list = i_new;
+      i_list->t = hpread_type_lookup (field, objfile);
+      ninstantiations++;
+
+      /* And the "type" field of that should point to a class */
+      field = fieldp->dtag.type;
+      fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+      if (fieldp->dblock.kind != DNTT_TYPE_CLASS) 
+        break;
+
+      /* Get the next expansion */
+      field = fieldp->dclass.nextexp;
+    }
+  }
+  TYPE_NINSTANTIATIONS(type) = ninstantiations;
+  if (ninstantiations > 0) 
+    TYPE_INSTANTIATIONS(type) = (struct type **)
+      obstack_alloc (&objfile->type_obstack, sizeof (struct type *) * ninstantiations);
+  for (n = ninstantiations; i_list; i_list = i_list->next)
+    {
+      n -= 1;
+      TYPE_INSTANTIATION(type, n) = i_list->t;
+    }
+
+
+  /* Copy the field-list to GDB's symbol table */
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_N_BASECLASSES (type) = n_base_classes;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field) * nfields);
+  /* Copy the saved-up fields into the field vector.  */
+  for (n = nfields, tmp_list = list; tmp_list; tmp_list = tmp_list->next)
+    {
+      n -= 1;
+      TYPE_FIELD (type, n) = tmp_list->field;
+    }
+
+  /* Copy the "function-field-list" (i.e., the list of member
+   * functions in the class) to GDB's symbol table 
+   */
+  TYPE_NFN_FIELDS (type) = n_fn_fields;
+  TYPE_NFN_FIELDS_TOTAL (type) = n_fn_fields_total;
+  TYPE_FN_FIELDLISTS(type) = (struct fn_fieldlist *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct fn_fieldlist) * n_fn_fields);
+  for (n = n_fn_fields; fn_list; fn_list = fn_list->next)
+    {
+      n -= 1;
+      TYPE_FN_FIELDLIST(type, n) = fn_list->field;
+    }
+
+  /* pai:: FIXME -- perhaps each bitvector should be created individually */
+  for (n = nfields, tmp_list = list; tmp_list; tmp_list = tmp_list->next)
+    {
+      n -= 1;
+      if (tmp_list->attributes)
+        {
+          need_bitvectors = 1;
+          break;
+        }
+    }
+
+  if (need_bitvectors)
+    {
+      /* pai:: this step probably redundant */ 
+      ALLOCATE_CPLUS_STRUCT_TYPE (type);
+
+      TYPE_FIELD_VIRTUAL_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_VIRTUAL_BITS (type), nfields);
+
+      TYPE_FIELD_PRIVATE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PRIVATE_BITS (type), nfields);
+      
+      TYPE_FIELD_PROTECTED_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PROTECTED_BITS (type), nfields);
+
+      /* this field vector isn't actually used with HP aCC */
+      TYPE_FIELD_IGNORE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_IGNORE_BITS (type), nfields);
+
+      while (nfields-- > 0)
+        {
+          if (B_TST(&(list->attributes),ATTR_VIRTUAL))
+            SET_TYPE_FIELD_VIRTUAL (type, nfields);
+          if (B_TST(&(list->attributes),ATTR_PRIVATE))
+            SET_TYPE_FIELD_PRIVATE (type, nfields);
+          if (B_TST(&(list->attributes),ATTR_PROTECT))
+            SET_TYPE_FIELD_PROTECTED (type, nfields);
+
+          list = list->next;
+        }
+    }
+  else
+    {
+      TYPE_FIELD_VIRTUAL_BITS(type) = NULL;
+      TYPE_FIELD_PROTECTED_BITS(type) = NULL;
+      TYPE_FIELD_PRIVATE_BITS(type) = NULL;
+    }
+  
+  if (has_vtable(type))
+    {
+      /* Allocate space for class runtime information */
+      TYPE_RUNTIME_PTR(type) = (struct runtime_info *) xmalloc (sizeof(struct runtime_info));
+      /* Set flag for vtable */
+      TYPE_VTABLE(type) = 1;
+      /* The first non-virtual base class with a vtable. */
+      TYPE_PRIMARY_BASE(type) = primary_base_class(type);
+      /* The virtual base list. */
+      TYPE_VIRTUAL_BASE_LIST(type) = virtual_base_list(type);
+    }
+  else
+    TYPE_RUNTIME_PTR(type) = NULL;
+
+  /* If this is a local type (C++ - declared inside a function), record file name & line # */
+  if (hpread_get_scope_depth (dn_bufp, objfile, 1 /* no need for real depth */))
+    {
+      TYPE_LOCALTYPE_PTR (type) = (struct local_type_info *) xmalloc (sizeof (struct local_type_info));
+      TYPE_LOCALTYPE_FILE (type) = (char *) xmalloc (strlen (current_subfile->name) + 1);
+      strcpy (TYPE_LOCALTYPE_FILE (type), current_subfile->name);
+      if (current_subfile->line_vector && (current_subfile->line_vector->nitems > 0))
+        TYPE_LOCALTYPE_LINE (type) = current_subfile->line_vector->item[current_subfile->line_vector->nitems - 1].line;
+      else
+        TYPE_LOCALTYPE_LINE (type) = 0;
+    }
+  else
+    TYPE_LOCALTYPE_PTR (type) = NULL;
+
+  /* Clear the global saying what template we are in the middle of processing */
+  current_template = NULL;
+
+  return type;
+}
+
+/* Adjust the physnames for each static member of a struct
+   or class type to be something like "A::x"; then various
+   other pieces of code that do a lookup_symbol on the phyname
+   work correctly.
+   TYPE is a pointer to the struct/class type
+   NAME is a char * (string) which is the class/struct name
+   Void return */ 
+
+static void
+fix_static_member_physnames (type, class_name, objfile)
+  struct type * type;
+  char * class_name;
+  struct objfile * objfile;
+{
+  int i;
+
+  /* We fix the member names only for classes or structs */ 
+  if (TYPE_CODE (type) != TYPE_CODE_STRUCT)
+    return;
+
+  for (i=0; i < TYPE_NFIELDS (type); i++)
+    if (TYPE_FIELD_STATIC (type, i))
+      {
+        if (TYPE_FIELD_STATIC_PHYSNAME (type, i))
+          return;  /* physnames are already set */
+
+        SET_FIELD_PHYSNAME (type->fields[i], 
+                 obstack_alloc (&objfile->type_obstack,
+                                  strlen (class_name) + strlen (TYPE_FIELD_NAME (type, i)) + 3));
+        strcpy (TYPE_FIELD_STATIC_PHYSNAME (type, i), class_name);
+        strcat (TYPE_FIELD_STATIC_PHYSNAME (type, i), "::");
+        strcat (TYPE_FIELD_STATIC_PHYSNAME (type, i), TYPE_FIELD_NAME (type, i));
+      }
+}
+
+/* Fix-up the type structure for a CLASS so that the type entry
+ * for a method (previously marked with a null type in hpread_read_struct_type()
+ * is set correctly to METHOD.
+ * OBJFILE is as for other such functions. 
+ * Void return. */ 
+ 
+static void
+fixup_class_method_type (class, method, objfile)
+  struct type * class;
+  struct type * method;
+  struct objfile * objfile;
+{
+  int i, j, k;
+
+  if (!class || !method || !objfile)
+    return;
+
+  /* Only for types that have methods */
+  if ((TYPE_CODE (class) != TYPE_CODE_CLASS) &&
+      (TYPE_CODE (class) != TYPE_CODE_UNION))
+    return;
+
+  /* Loop over all methods and find the one marked with a NULL type */ 
+  for (i = 0; i < TYPE_NFN_FIELDS (class); i++)
+    for (j = 0; j < TYPE_FN_FIELDLIST_LENGTH (class, i); j++)
+      if (TYPE_FN_FIELD_TYPE (TYPE_FN_FIELDLIST1 (class, i), j) == NULL)
+        {
+          /* Set the method type */ 
+          TYPE_FN_FIELD_TYPE (TYPE_FN_FIELDLIST1 (class, i), j) = method;
+          /* The argument list */
+          (TYPE_FN_FIELD_TYPE (TYPE_FN_FIELDLIST1 (class, i), j))->type_specific.arg_types
+            = (struct type **) obstack_alloc(&objfile->type_obstack,
+                                             sizeof(struct type *) * (method->nfields + 1));
+          for (k = 0; k < method->nfields; k++) 
+          (TYPE_FN_FIELD_TYPE (TYPE_FN_FIELDLIST1 (class, i), j))->type_specific.arg_types[k] = method->fields[k].type;
+          /* void termination */ 
+          (TYPE_FN_FIELD_TYPE (TYPE_FN_FIELDLIST1 (class, i), j))->type_specific.arg_types[method->nfields] = builtin_type_void;
+          
+          /* pai: It's not clear why this args field has to be set.  Perhaps
+           * it should be eliminated entirely. */
+          (TYPE_FN_FIELD (TYPE_FN_FIELDLIST1 (class, i), j)).args
+            = (struct type **) obstack_alloc(&objfile->type_obstack,
+                                             sizeof(struct type *) * (method->nfields + 1));
+          for (k = 0; k < method->nfields; k++)
+            (TYPE_FN_FIELD (TYPE_FN_FIELDLIST1 (class, i), j)).args[k] = method->fields[k].type;
+          /* null-terminated, unlike arg_types above */ 
+          (TYPE_FN_FIELD (TYPE_FN_FIELDLIST1 (class, i), j)).args[method->nfields] = NULL;
+
+          /* Break out of both loops -- only one method to fix up in a class */ 
+          goto finish;
+        }
+
+finish:
+  TYPE_FLAGS (class) &= ~TYPE_FLAG_INCOMPLETE;  
+}
+
+
+/* If we're in the middle of processing a template, get a pointer
+ * to the Nth template argument.
+ * An example may make this clearer:
+ *   template <class T1, class T2> class q2 {
+ *     public:
+ *     T1 a;
+ *     T2 b;
+ *   };
+ * The type for "a" will be "first template arg" and
+ * the type for "b" will be "second template arg".
+ * We need to look these up in order to fill in "a" and "b"'s type.
+ * This is called from hpread_type_lookup().
+ */
+static struct type * 
+hpread_get_nth_template_arg(objfile, n)
+     struct objfile *objfile;
+     int n;
+{
+   if (current_template != NULL)
+     return TYPE_TEMPLATE_ARG(current_template, n).type;
+   else
+     return lookup_fundamental_type (objfile, FT_TEMPLATE_ARG);
+}
+
+/* Read in and internalize a TEMPL_ARG (template arg) symbol.  */
+
+static struct type *
+hpread_read_templ_arg_type (hp_type, dn_bufp, objfile, name)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+     char * name;
+{
+  struct type *type;
+
+  /* See if it's something we've already deal with.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_TEMPLATE_ARG)
+    return type;
+
+  /* Nope.  Fill in the appropriate fields.  */
+  TYPE_CODE (type) = TYPE_CODE_TEMPLATE_ARG;
+  TYPE_LENGTH (type) = 0;
+  TYPE_NFIELDS (type) = 0;
+  TYPE_NAME (type) = name;
+  return type;
+}
+
+/* Read in and internalize a set debug symbol.  */
+
+static struct type *
+hpread_read_set_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+
+  /* See if it's something we've already deal with.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_SET)
+    return type;
+
+  /* Nope.  Fill in the appropriate fields.  */
+  TYPE_CODE (type) = TYPE_CODE_SET;
+  TYPE_LENGTH (type) = dn_bufp->dset.bitlength / 8;
+  TYPE_NFIELDS (type) = 0;
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->dset.subtype,
+						objfile);
+  return type;
+}
+
+/* Read in and internalize an array debug symbol.  */
+
+static struct type *
+hpread_read_array_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+  
+  /* Allocate an array type symbol.
+   * Why no check for already-read here, like in the other
+   * hpread_read_xxx_type routines?  Because it kept us 
+   * from properly determining the size of the array!  
+   */
+  type = hpread_alloc_type (hp_type, objfile);
+
+  TYPE_CODE (type) = TYPE_CODE_ARRAY;
+
+  /* Although the hp-symtab.h does not *require* this to be the case,
+   * GDB is assuming that "arrayisbytes" and "elemisbytes" be consistent.
+   * I.e., express both array-length and element-length in bits,
+   * or express both array-length and element-length in bytes.
+   */
+  if (!((dn_bufp->darray.arrayisbytes && dn_bufp->darray.elemisbytes) ||
+	(!dn_bufp->darray.arrayisbytes && !dn_bufp->darray.elemisbytes))) {
+    warning ("error in hpread_array_type.\n");
+    return;
+  } else if (dn_bufp->darray.arraylength == 0x7fffffff) {
+    /* The HP debug format represents char foo[]; as an array with
+     * length 0x7fffffff.  Internally GDB wants to represent this
+     *	as an array of length zero.  
+     */
+    TYPE_LENGTH (type) = 0;
+  } else if (dn_bufp->darray.arrayisbytes)
+    TYPE_LENGTH (type) = dn_bufp->darray.arraylength;
+  else /* arraylength is in bits */
+    TYPE_LENGTH (type) = dn_bufp->darray.arraylength / 8;
+
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->darray.elemtype,
+						objfile);
+
+  /* The one "field" is used to store the subscript type */
+  /* Since C and C++ multi-dimensional arrays are simply represented
+   * as: array of array of ..., we only need one subscript-type
+   * per array. This subscript type is typically a subrange of integer.
+   * If this gets extended to support languages like Pascal, then
+   * we need to fix this to represent multi-dimensional arrays properly.
+   */
+  TYPE_NFIELDS (type) = 1;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field));
+  TYPE_FIELD_TYPE (type, 0) = hpread_type_lookup (dn_bufp->darray.indextype,
+						  objfile);
+  return type;
+}
+
+/* Read in and internalize a subrange debug symbol.  */
+static struct type *
+hpread_read_subrange_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+
+  /* Is it something we've already dealt with.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_RANGE)
+    return type;
+
+  /* Nope, internalize it.  */
+  TYPE_CODE (type) = TYPE_CODE_RANGE;
+  TYPE_LENGTH (type) = dn_bufp->dsubr.bitlength / 8;
+  TYPE_NFIELDS (type) = 2;
+  TYPE_FIELDS (type)
+    = (struct field *) obstack_alloc (&objfile->type_obstack,
+				      2 * sizeof (struct field));
+
+  if (dn_bufp->dsubr.dyn_low)
+    TYPE_FIELD_BITPOS (type, 0) = 0;
+  else
+    TYPE_FIELD_BITPOS (type, 0) = dn_bufp->dsubr.lowbound;
+
+  if (dn_bufp->dsubr.dyn_high)
+    TYPE_FIELD_BITPOS (type, 1) = -1;
+  else
+    TYPE_FIELD_BITPOS (type, 1) = dn_bufp->dsubr.highbound;
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->dsubr.subtype,
+						objfile);
+  return type;
+}
+
+/* struct type * hpread_type_lookup(hp_type, objfile)
+ *   Arguments:
+ *     hp_type: A pointer into the DNTT specifying what type we
+ *              are about to "look up"., or else [for fundamental types
+ *              like int, float, ...] an "immediate" structure describing
+ *              the type.
+ *     objfile: ?
+ *   Return value: A pointer to a "struct type" (representation of a
+ *                 type in GDB's internal symbol table - see gdbtypes.h)
+ *   Routine description:
+ *     There are a variety of places when scanning the DNTT when we
+ *     need to interpret a "type" field. The simplest and most basic 
+ *     example is when we're processing the symbol table record
+ *     for a data symbol (a SVAR or DVAR record). That has
+ *     a "type" field specifying the type of the data symbol. That
+ *     "type" field is either an "immediate" type specification (for the
+ *     fundamental types) or a DNTT pointer (for more complicated types). 
+ *     For the more complicated types, we may or may not have already
+ *     processed the pointed-to type. (Multiple data symbols can of course
+ *     share the same type).
+ *     The job of hpread_type_lookup() is to process this "type" field.
+ *     Most of the real work is done in subroutines. Here we interpret
+ *     the immediate flag. If not immediate, chase the DNTT pointer to
+ *     find our way to the SOM record describing the type, switch on
+ *     the SOM kind, and then call an appropriate subroutine depending
+ *     on what kind of type we are constructing. (e.g., an array type,
+ *     a struct/class type, etc).
+ */
+static struct type *
+hpread_type_lookup (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  union dnttentry *dn_bufp;
+  struct type * tmp_type;
+
+  /* First see if it's a simple builtin type.  */
+  if (hp_type.dntti.immediate)
+    /* If this is a template argument, the argument number is
+     * encoded in the bitlength. All other cases, just return
+     * GDB's representation of this fundamental type.
+     */
+    if (hp_type.dntti.type == HP_TYPE_TEMPLATE_ARG)
+      return hpread_get_nth_template_arg(objfile, hp_type.dntti.bitlength);
+    else
+      return lookup_fundamental_type (objfile, hpread_type_translate (hp_type));
+
+  /* Not a builtin type.  We'll have to read it in.  */
+  if (hp_type.dnttp.index < LNTT_SYMCOUNT (objfile))
+    dn_bufp = hpread_get_lntt (hp_type.dnttp.index, objfile);
+  else
+    /* This is a fancy way of returning NULL */
+    return lookup_fundamental_type (objfile, FT_VOID);
+
+  switch (dn_bufp->dblock.kind)
+    {
+    case DNTT_TYPE_SRCFILE:
+    case DNTT_TYPE_MODULE:
+    case DNTT_TYPE_ENTRY:
+    case DNTT_TYPE_BEGIN:
+    case DNTT_TYPE_END:
+    case DNTT_TYPE_IMPORT:
+    case DNTT_TYPE_LABEL:
+    case DNTT_TYPE_FPARAM:
+    case DNTT_TYPE_SVAR:
+    case DNTT_TYPE_DVAR:
+    case DNTT_TYPE_CONST:
+    case DNTT_TYPE_MEMENUM:
+    case DNTT_TYPE_VARIANT:
+    case DNTT_TYPE_FILE:
+    case DNTT_TYPE_WITH:
+    case DNTT_TYPE_COMMON:
+    case DNTT_TYPE_COBSTRUCT:
+    case DNTT_TYPE_XREF:
+    case DNTT_TYPE_SA:
+    case DNTT_TYPE_MACRO:
+    case DNTT_TYPE_BLOCKDATA:
+    case DNTT_TYPE_CLASS_SCOPE:
+    case DNTT_TYPE_MEMACCESS:
+    case DNTT_TYPE_INHERITANCE:
+    case DNTT_TYPE_OBJECT_ID:
+    case DNTT_TYPE_FRIEND_CLASS:
+    case DNTT_TYPE_FRIEND_FUNC:
+      /* These are not types - something went wrong.  */
+      /* This is a fancy way of returning NULL */
+      return lookup_fundamental_type (objfile, FT_VOID);
+
+    case DNTT_TYPE_FUNCTION:
+      /* We wind up here when dealing with class member functions 
+       * (called from hpread_read_struct_type(), i.e. when processing
+       * the class definition itself).
+       */
+      return hpread_read_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_DOC_FUNCTION:
+      return hpread_read_doc_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_TYPEDEF:
+      {
+        /* A typedef - chase it down by making a recursive call */
+	struct type *structtype = hpread_type_lookup (dn_bufp->dtype.type,
+						      objfile);
+
+        /* The following came from the base hpread.c that we inherited.
+         * It is WRONG so I have commented it out. - RT
+         *...
+
+	char *suffix;
+	suffix = VT (objfile) + dn_bufp->dtype.name;
+ 	TYPE_NAME (structtype) = suffix;
+
+         * ... further explanation ....
+         *
+         * What we have here is a typedef pointing to a typedef.
+         * E.g.,
+         * typedef int foo;
+         * typedef foo fum;
+         *
+         * What we desire to build is (these are pictures
+         * of "struct type"'s): 
+         *
+         *  +---------+     +----------+     +------------+
+         *  | typedef |     | typedef  |     | fund. type |
+         *  |     type| ->  |      type| ->  |            |
+         *  | "fum"   |     | "foo"    |     | "int"      |
+         *  +---------+     +----------+     +------------+
+         *
+         * What this commented-out code is doing is smashing the
+         * name of pointed-to-type to be the same as the pointed-from
+         * type. So we wind up with something like:
+         *
+         *  +---------+     +----------+     +------------+
+         *  | typedef |     | typedef  |     | fund. type |
+         *  |     type| ->  |      type| ->  |            |
+         *  | "fum"   |     | "fum"    |     | "fum"      |
+         *  +---------+     +----------+     +------------+
+         * 
+         */
+
+	return structtype;
+      }
+
+    case DNTT_TYPE_TAGDEF:
+	{
+	/* Just a little different from above.  We have to tack on
+	 * an identifier of some kind (struct, union, enum, class, etc).  
+         */
+	struct type *structtype = hpread_type_lookup (dn_bufp->dtype.type,
+						      objfile);
+	char *prefix, *suffix;
+	suffix = VT (objfile) + dn_bufp->dtype.name;
+
+	/* Lookup the next type in the list.  It should be a structure,
+	 * union, class, enum, or template type.  
+         * We will need to attach that to our name.  
+         */
+	if (dn_bufp->dtype.type.dnttp.index < LNTT_SYMCOUNT (objfile))
+	  dn_bufp = hpread_get_lntt (dn_bufp->dtype.type.dnttp.index, objfile);
+	else {
+          complain (&hpread_type_lookup_complaint);
+          return;
+        }
+
+	if (dn_bufp->dblock.kind == DNTT_TYPE_STRUCT) {
+	  prefix = "struct ";
+	} else if (dn_bufp->dblock.kind == DNTT_TYPE_UNION) {
+	  prefix = "union ";
+	} else if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS) { 
+          /* Further field for CLASS saying how it was really declared */
+          /* 0==class, 1==union, 2==struct */
+          if (dn_bufp->dclass.class_decl == 0) 
+	    prefix = "class ";
+          else if (dn_bufp->dclass.class_decl == 1) 
+	    prefix = "union ";
+          else if (dn_bufp->dclass.class_decl == 2) 
+	    prefix = "struct ";
+          else
+            prefix = "";
+	} else if (dn_bufp->dblock.kind == DNTT_TYPE_ENUM) {
+	  prefix = "enum ";
+	} else if (dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE) {
+	  prefix = "template ";
+        } else {
+          prefix = "";
+        }
+
+	/* Build the correct name.  */
+	structtype->name
+	  = (char *) obstack_alloc (&objfile->type_obstack,
+				    strlen (prefix) + strlen (suffix) + 1);
+	TYPE_NAME (structtype) = strcpy (TYPE_NAME (structtype), prefix);
+	TYPE_NAME (structtype) = strcat (TYPE_NAME (structtype), suffix);
+	TYPE_TAG_NAME (structtype) = suffix;
+
+        /* For classes/structs, we have to set the static member "physnames"
+           to point to strings like "Class::Member" */ 
+        if (TYPE_CODE (structtype) == TYPE_CODE_STRUCT)
+          fix_static_member_physnames (structtype, suffix, objfile);
+
+	return structtype;
+      }
+
+    case DNTT_TYPE_POINTER:
+      /* Pointer type - call a routine in gdbtypes.c that constructs
+       * the appropriate GDB type.
+       */
+      return make_pointer_type (
+          hpread_type_lookup (dn_bufp->dptr.pointsto, 
+                              objfile), 
+          NULL);
+
+    case DNTT_TYPE_REFERENCE:
+      /* C++ reference type - call a routine in gdbtypes.c that constructs
+       * the appropriate GDB type.
+       */
+      return make_reference_type (
+                 hpread_type_lookup (dn_bufp->dreference.pointsto, 
+                                     objfile), 
+                 NULL);
+   
+    case DNTT_TYPE_ENUM:
+      return hpread_read_enum_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_SET:
+      return hpread_read_set_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_SUBRANGE:
+      return hpread_read_subrange_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_ARRAY:
+      return hpread_read_array_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+      return hpread_read_struct_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_FIELD:
+      return hpread_type_lookup (dn_bufp->dfield.type, objfile);
+
+    case DNTT_TYPE_FUNCTYPE:
+      /* Here we want to read the function SOMs and return a 
+       * type for it. We get here, for instance, when processing
+       * pointer-to-function type.
+       */
+      return hpread_read_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_PTRMEM:
+      /* Declares a C++ pointer-to-data-member type. 
+       * The "pointsto" field defines the class,
+       * while the "memtype" field defines the pointed-to-type.
+       */
+      {
+      struct type * ptrmemtype;
+      struct type * class_type;
+      struct type * memtype;
+      memtype = hpread_type_lookup (dn_bufp->dptrmem.memtype, 
+                                    objfile), 
+      class_type = hpread_type_lookup (dn_bufp->dptrmem.pointsto, 
+                                       objfile), 
+      ptrmemtype = alloc_type(objfile);
+      smash_to_member_type(ptrmemtype, class_type, memtype); 
+      return make_pointer_type(ptrmemtype, NULL);
+      }
+      break;
+
+    case DNTT_TYPE_PTRMEMFUNC:
+      /* Defines a C++ pointer-to-function-member type. 
+       * The "pointsto" field defines the class,
+       * while the "memtype" field defines the pointed-to-type.
+       */
+      {
+      struct type * ptrmemtype;
+      struct type * class_type;
+      struct type * functype;
+      struct type * retvaltype;
+      int nargs;
+      int i;
+      struct type ** args_type;
+      class_type = hpread_type_lookup (dn_bufp->dptrmem.pointsto, 
+                                       objfile); 
+      functype = hpread_type_lookup (dn_bufp->dptrmem.memtype, 
+                                     objfile); 
+      retvaltype = TYPE_TARGET_TYPE (functype);
+      nargs =   TYPE_NFIELDS (functype);
+      args_type = (struct type **) xmalloc ((nargs+1) * sizeof (struct type *));
+      for (i = 0; i < nargs; i++) {
+        args_type[i] = TYPE_FIELD_TYPE (functype, i); 
+      }
+      args_type[nargs] = NULL;
+      ptrmemtype = alloc_type(objfile);
+      smash_to_method_type(ptrmemtype, class_type, retvaltype, args_type); 
+      return make_pointer_type(ptrmemtype, NULL);
+      }
+      break;
+
+    case DNTT_TYPE_CLASS: 
+      return hpread_read_struct_type (hp_type, dn_bufp, objfile);
+
+    case DNTT_TYPE_GENFIELD:
+      /* Chase pointer from GENFIELD to FIELD, and make recursive
+       * call on that.
+       */
+      return hpread_type_lookup (dn_bufp->dgenfield.field, objfile);
+
+    case DNTT_TYPE_VFUNC:
+      /* C++ virtual function.
+       * We get here in the course of processing a class type which
+       * contains virtual functions. Just go through another level
+       * of indirection to get to the pointed-to function SOM.
+       */
+      return hpread_type_lookup (dn_bufp->dvfunc.funcptr, objfile);
+
+    case DNTT_TYPE_MODIFIER:
+      /* Check the modifiers and then just make a recursive call on
+       * the "type" pointed to by the modifier DNTT.
+       * 
+       * pai:: FIXME -- do we ever want to handle "m_duplicate" and
+       * "m_void" modifiers?  Is static_flag really needed here?
+       * (m_static used for methods of classes, elsewhere).
+       */
+      tmp_type = make_cv_type (dn_bufp->dmodifier.m_const, 
+                               dn_bufp->dmodifier.m_volatile,
+                               hpread_type_lookup (dn_bufp->dmodifier.type, objfile),
+                               0);
+      return tmp_type;
+      
+
+    case DNTT_TYPE_MEMFUNC:
+      /* Member function. Treat like a function.
+       * I think we get here in the course of processing a 
+       * pointer-to-member-function type...
+       */
+      return hpread_read_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_DOC_MEMFUNC:
+      return hpread_read_doc_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_TEMPLATE:
+      /* Template - sort of the header for a template definition,
+       * which like a class, points to a member list and also points
+       * to a TEMPLATE_ARG list of type-arguments.
+       */
+      return hpread_read_struct_type (hp_type, dn_bufp, objfile);
+
+    case DNTT_TYPE_TEMPLATE_ARG:
+      {
+      char * name;
+      /* The TEMPLATE record points to an argument list of
+       * TEMPLATE_ARG records, each of which describes one
+       * of the type-arguments. 
+       */
+      name =  VT (objfile) + dn_bufp->dtempl_arg.name;
+      return hpread_read_templ_arg_type (hp_type, dn_bufp, objfile, name);
+      }
+
+    case DNTT_TYPE_FUNC_TEMPLATE:
+      /* We wind up here when processing a TEMPLATE type, 
+       * if the template has member function(s).
+       * Treat it like a FUNCTION.
+       */
+      return hpread_read_function_type (hp_type, dn_bufp, objfile, 0);
+
+    case DNTT_TYPE_LINK:
+      /* The LINK record is used to link up templates with instantiations.
+       * There is no type associated with the LINK record per se.
+       */
+      return lookup_fundamental_type (objfile, FT_VOID);
+
+    /* Also not yet handled... */
+    /* case DNTT_TYPE_DYN_ARRAY_DESC: */
+    /* case DNTT_TYPE_DESC_SUBRANGE: */
+    /* case DNTT_TYPE_BEGIN_EXT: */
+    /* case DNTT_TYPE_INLN: */
+    /* case DNTT_TYPE_INLN_LIST: */
+    /* case DNTT_TYPE_ALIAS: */
+    default:
+      /* A fancy way of returning NULL */
+      return lookup_fundamental_type (objfile, FT_VOID);
+    }
+}
+
+static sltpointer
+hpread_record_lines (subfile, s_idx, e_idx, objfile, offset)
+     struct subfile *subfile;
+     sltpointer s_idx, e_idx;
+     struct objfile *objfile;
+     CORE_ADDR offset;
+{
+  union sltentry *sl_bufp;
+
+  while (s_idx <= e_idx)
+    {
+      sl_bufp = hpread_get_slt (s_idx, objfile);
+      /* Only record "normal" entries in the SLT.  */
+      if (sl_bufp->snorm.sltdesc == SLT_NORMAL
+	  || sl_bufp->snorm.sltdesc == SLT_EXIT)
+	record_line (subfile, sl_bufp->snorm.line,
+		     sl_bufp->snorm.address + offset);
+      else if (sl_bufp->snorm.sltdesc == SLT_NORMAL_OFFSET)
+	record_line (subfile, sl_bufp->snormoff.line,
+		     sl_bufp->snormoff.address + offset);
+      s_idx++;
+    }
+  return e_idx;
+}
+
+/* Given a function "f" which is a member of a class, find
+ * the classname that it is a member of. Used to construct
+ * the name (e.g., "c::f") which GDB will put in the
+ * "demangled name" field of the function's symbol.
+ * Called from hpread_process_one_debug_symbol()
+ * If "f" is not a member function, return NULL.
+ */
+char * class_of (functype)
+struct type * functype;
+{
+  struct type * first_param_type;
+  char * first_param_name;
+  struct type * pointed_to_type;
+  char * class_name;
+
+  /* Check that the function has a first argument "this",
+   * and that "this" is a pointer to a class. If not,
+   * functype is not a member function, so return NULL.
+   */
+  if (TYPE_NFIELDS(functype) == 0)
+    return NULL;
+  first_param_name = TYPE_FIELD_NAME (functype, 0);
+  if (first_param_name == NULL)
+    return NULL; /* paranoia */
+  if (strcmp(first_param_name, "this"))
+    return NULL;
+  first_param_type = TYPE_FIELD_TYPE (functype, 0);
+  if (first_param_type == NULL)
+    return NULL; /* paranoia */
+  if (TYPE_CODE(first_param_type) != TYPE_CODE_PTR)
+    return NULL;
+
+  /* Get the thing that "this" points to, check that
+   * it's a class, and get its class name.
+   */
+  pointed_to_type = TYPE_TARGET_TYPE(first_param_type);
+  if (pointed_to_type == NULL) 
+    return NULL; /* paranoia */
+  if (TYPE_CODE(pointed_to_type) != TYPE_CODE_CLASS)
+    return NULL;
+  class_name = TYPE_NAME(pointed_to_type);
+  if (class_name == NULL)
+    return NULL; /* paranoia */
+
+  /* The class name may be of the form "class c", in which case
+   * we want to strip off the leading "class ".
+   */
+  if (strncmp(class_name, "class ", 6) == 0)
+    class_name += 6;
+
+  return class_name;
+}
+
+/* Internalize one native debug symbol. 
+ * Called in a loop from hpread_expand_symtab(). 
+ * Arguments:
+ *   dn_bufp: 
+ *   name: 
+ *   section_offsets:
+ *   objfile:
+ *   text_offset: 
+ *   text_size: 
+ *   filename: 
+ *   index: 		Index of this symbol
+ *   at_module_boundary_p Pointer to boolean flag to control caller's loop.
+ */
+
+static void
+hpread_process_one_debug_symbol (dn_bufp, name, section_offsets, objfile,
+				 text_offset, text_size, filename,
+                                 index, at_module_boundary_p
+                                 )
+     union dnttentry *dn_bufp;
+     char *name;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+     CORE_ADDR text_offset;
+     int       text_size;
+     char     *filename;
+     int       index;
+     int      *at_module_boundary_p;
+{
+  unsigned long desc;
+  int type;
+  CORE_ADDR valu;
+  int offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
+  int data_offset = ANOFFSET (section_offsets, SECT_OFF_DATA);
+  union dnttentry *dn_temp;
+  dnttpointer hp_type;
+  struct symbol *sym;
+  struct context_stack *new;
+  char * class_scope_name;
+  extern int is_in_import_list (); /* in somread.c */ 
+  
+  /* Allocate one GDB debug symbol and fill in some default values. */
+  sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					 sizeof (struct symbol));
+  memset (sym, 0, sizeof (struct symbol));
+  SYMBOL_NAME (sym) = obsavestring (name, strlen (name), &objfile->symbol_obstack);
+  SYMBOL_LANGUAGE (sym) = language_auto;
+  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+  SYMBOL_LINE (sym) = 0;
+  SYMBOL_VALUE (sym) = 0;
+  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+
+  /* Just a trick in case the SOM debug symbol is a type definition.
+   * There are routines that are set up to build a GDB type symbol, given
+   * a SOM dnttpointer. So we set up a dummy SOM dnttpointer "hp_type".
+   * This allows us to call those same routines.
+   */
+  hp_type.dnttp.extension = 1;
+  hp_type.dnttp.immediate = 0;
+  hp_type.dnttp.global = 0;
+  hp_type.dnttp.index = index;
+
+  /* This "type" is the type of SOM record.
+   * Switch on SOM type.
+   */
+  type = dn_bufp->dblock.kind;
+  switch (type)
+    {
+    case DNTT_TYPE_SRCFILE:
+      /* This type of symbol indicates from which source file or
+       * include file any following data comes. It may indicate:
+       *
+       * o   The start of an entirely new source file (and thus
+       *     a new module)
+       *
+       * o   The start of a different source file due to #include
+       *
+       * o   The end of an include file and the return to the original
+       *     file. Thus if "foo.c" includes "bar.h", we see first
+       *     a SRCFILE for foo.c, then one for bar.h, and then one for
+       *     foo.c again.
+       *
+       * If it indicates the start of a new module then we must
+       * finish the symbol table of the previous module 
+       * (if any) and start accumulating a new symbol table.  
+       */
+
+      valu = text_offset;
+      if (!last_source_file ) {
+          /*
+           * A note on "last_source_file": this is a char* pointing
+           * to the actual file name.  "start_symtab" sets it,
+           * "end_symtab" clears it.
+           *
+           * So if "last_source_file" is NULL, then either this is
+           * the first record we are looking at, or a previous call
+           * to "end_symtab()" was made to close out the previous
+           * module.  Since we're now quitting the scan loop when we
+           * see a MODULE END record, we should never get here, except
+           * in the case that we're not using the quick look-up tables
+           * and have to use the old system as a fall-back.
+           */
+	  start_symtab (name, NULL, valu);
+	  record_debugformat ("HP");
+	  SL_INDEX (objfile) = dn_bufp->dsfile.address;
+      }
+
+      else {
+          /* Either a new include file, or a SRCFILE record
+           * saying we are back in the main source (or out of
+           * a nested include file) again.
+           */
+	  SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						    SL_INDEX (objfile),
+						    dn_bufp->dsfile.address,
+						    objfile, offset);
+      }
+
+      /* A note on "start_subfile".  This routine will check
+       * the name we pass it and look for an existing subfile
+       * of that name.  There's thus only one sub-file for the
+       * actual source (e.g. for "foo.c" in foo.c), despite the
+       * fact that we'll see lots of SRCFILE entries for foo.c
+       * inside foo.c.
+       */
+      start_subfile (name, NULL);
+      break;
+      
+    case DNTT_TYPE_MODULE:
+      /*
+       * We no longer ignore DNTT_TYPE_MODULE symbols.  The module 
+       * represents the meaningful semantic structure of a compilation
+       * unit.  We expect to start the psymtab-to-symtab expansion
+       * looking at a MODULE entry, and to end it at the corresponding
+       * END MODULE entry.
+       *
+       *--Begin outdated comments
+       * 
+       * This record signifies the start of a new source module
+       * In C/C++ there is no explicit "module" construct in the language,
+       * but each compilation unit is implicitly a module and they
+       * do emit the DNTT_TYPE_MODULE records.
+       * The end of the module is marked by a matching DNTT_TYPE_END record.
+       *
+       * The reason GDB gets away with ignoring the DNTT_TYPE_MODULE record 
+       * is it notices the DNTT_TYPE_END record for the previous 
+       * module (see comments under DNTT_TYPE_END case), and then treats
+       * the next DNTT_TYPE_SRCFILE record as if it were the module-start record.
+       * (i.e., it makes a start_symtab() call).
+       * This scheme seems a little convoluted, but I'll leave it 
+       * alone on the principle "if it ain't broke don't fix
+       * it". (RT).
+       *
+       *-- End outdated comments
+       */
+
+      valu = text_offset;
+      if (!last_source_file )
+	{
+          /* Start of a new module. We know this because "last_source_file"
+           * is NULL, which can only happen the first time or if we just 
+           * made a call to end_symtab() to close out the previous module.
+           */
+	  start_symtab (name, NULL, valu);
+	  SL_INDEX (objfile) = dn_bufp->dmodule.address;
+	}
+      else
+	{
+          /* This really shouldn't happen if we're using the quick
+           * look-up tables, as it would mean we'd scanned past an
+           * END MODULE entry.  But if we're not using the tables,
+           * we started the module on the SRCFILE entry, so it's ok.
+           * For now, accept this.
+           */
+     /* warning( "Error expanding psymtab, missed module end, found entry for %s",
+      *           name );
+      */
+          *at_module_boundary_p = -1;
+	}
+
+      start_subfile (name, NULL);
+      break;
+
+    case DNTT_TYPE_FUNCTION:
+    case DNTT_TYPE_ENTRY:
+      /* A function or secondary entry point.  */
+      valu = dn_bufp->dfunc.lowaddr + offset;
+
+      /* Record lines up to this point. */
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dfunc.address,
+						objfile, offset);
+      
+      WITHIN_FUNCTION (objfile) = 1;
+      CURRENT_FUNCTION_VALUE (objfile) = valu;
+
+      /* Stack must be empty now.  */
+      if (context_stack_depth != 0)
+	complain (&lbrac_unmatched_complaint, (char *) symnum);
+      new = push_context (0, valu);
+
+      /* Built a type for the function. This includes processing
+       * the symbol records for the function parameters.
+       */
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_TYPE (sym) = hpread_read_function_type (hp_type, dn_bufp, objfile, 1);
+
+      /* The "SYMBOL_NAME" field is expected to be the mangled name
+       * (if any), which we get from the "alias" field of the SOM record
+       * if that exists.
+       */
+      if ((dn_bufp->dfunc.language == HP_LANGUAGE_CPLUSPLUS) && 
+          dn_bufp->dfunc.alias && /* has an alias */ 
+          *(char *)(VT (objfile) + dn_bufp->dfunc.alias)) /* not a null string */ 
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->dfunc.alias;
+      else
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->dfunc.name;
+
+      /* Special hack to get around HP compilers' insistence on
+       * reporting "main" as "_MAIN_" for C/C++ */
+      if ((strcmp (SYMBOL_NAME (sym), "_MAIN_") == 0) &&
+          (strcmp (VT (objfile) + dn_bufp->dfunc.name, "main") == 0))
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->dfunc.name;
+      
+      /* The SYMBOL_CPLUS_DEMANGLED_NAME field is expected to
+       * be the demangled name.
+       */
+      if (dn_bufp->dfunc.language == HP_LANGUAGE_CPLUSPLUS)
+	{
+        /* SYMBOL_INIT_DEMANGLED_NAME is a macro which winds up
+         * calling the demangler in libiberty (cplus_demangle()) to
+         * do the job. This generally does the job, even though
+         * it's intended for the GNU compiler and not the aCC compiler
+         * Note that SYMBOL_INIT_DEMANGLED_NAME calls the
+         * demangler with arguments DMGL_PARAMS | DMGL_ANSI.
+         * Generally, we don't want params when we display
+         * a demangled name, but when I took out the DMGL_PARAMS,
+         * some things broke, so I'm leaving it in here, and
+         * working around the issue in stack.c. - RT
+         */
+        SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+        if ((SYMBOL_NAME (sym) == VT (objfile) + dn_bufp->dfunc.alias) &&
+           (!SYMBOL_CPLUS_DEMANGLED_NAME(sym))) {
+
+          /* Well, the symbol name is mangled, but the
+           * demangler in libiberty failed so the demangled
+           * field is still NULL. Try to
+           * do the job ourselves based on the "name" field
+           * in the SOM record. A complication here is that
+           * the name field contains only the function name
+           * (like "f"), whereas we want the class qualification
+           * (as in "c::f"). Try to reconstruct that.
+           */          
+          char * basename;
+          char * classname;
+          char * dem_name;
+          basename = VT (objfile) + dn_bufp->dfunc.name;
+          classname = class_of(SYMBOL_TYPE(sym));
+          if (classname) {
+            dem_name = xmalloc(strlen(basename)+strlen(classname)+3);
+            strcpy(dem_name, classname);
+            strcat(dem_name, "::");
+            strcat(dem_name, basename);
+            SYMBOL_CPLUS_DEMANGLED_NAME(sym) = dem_name;
+            SYMBOL_LANGUAGE (sym) = language_cplus;
+          }
+        }
+      }
+ 
+      /* Add the function symbol to the list of symbols in this blockvector */
+      if (dn_bufp->dfunc.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      new->name = sym;
+
+      /* Search forward to the next BEGIN and also read
+       * in the line info up to that point. 
+       * Not sure why this is needed.
+       * In HP FORTRAN this code is harmful since there   
+       * may not be a BEGIN after the FUNCTION.
+       * So I made it C/C++ specific. - RT
+       */
+      if (dn_bufp->dfunc.language == HP_LANGUAGE_C ||
+          dn_bufp->dfunc.language == HP_LANGUAGE_CPLUSPLUS) {
+        while (dn_bufp->dblock.kind != DNTT_TYPE_BEGIN)
+	  {
+	  dn_bufp = hpread_get_lntt (++index, objfile);
+	  if (dn_bufp->dblock.extension)
+	    continue;
+	  }
+        SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+  						  SL_INDEX (objfile),
+						  dn_bufp->dbegin.address,
+						  objfile, offset);
+        SYMBOL_LINE (sym) = hpread_get_line (dn_bufp->dbegin.address, objfile);
+      }
+      record_line (current_subfile, SYMBOL_LINE (sym), valu);
+      break;
+
+    case DNTT_TYPE_DOC_FUNCTION:
+      valu = dn_bufp->ddocfunc.lowaddr + offset;
+
+      /* Record lines up to this point. */
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->ddocfunc.address,
+						objfile, offset);
+      
+      WITHIN_FUNCTION (objfile) = 1;
+      CURRENT_FUNCTION_VALUE (objfile) = valu;
+      /* Stack must be empty now.  */
+      if (context_stack_depth != 0)
+	complain (&lbrac_unmatched_complaint, (char *) symnum);
+      new = push_context (0, valu);
+
+      /* Built a type for the function. This includes processing
+       * the symbol records for the function parameters.
+       */
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_TYPE (sym) = hpread_read_doc_function_type (hp_type, dn_bufp, objfile, 1);
+
+      /* The "SYMBOL_NAME" field is expected to be the mangled name
+       * (if any), which we get from the "alias" field of the SOM record
+       * if that exists.
+       */
+      if ((dn_bufp->ddocfunc.language == HP_LANGUAGE_CPLUSPLUS) && 
+          dn_bufp->ddocfunc.alias && /* has an alias */ 
+          *(char *)(VT (objfile) + dn_bufp->ddocfunc.alias)) /* not a null string */ 
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->ddocfunc.alias;
+      else
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->ddocfunc.name;
+
+      /* Special hack to get around HP compilers' insistence on
+       * reporting "main" as "_MAIN_" for C/C++ */
+      if ((strcmp (SYMBOL_NAME (sym), "_MAIN_") == 0) &&
+          (strcmp (VT (objfile) + dn_bufp->ddocfunc.name, "main") == 0))
+        SYMBOL_NAME (sym) = VT (objfile) + dn_bufp->ddocfunc.name;
+      
+      if (dn_bufp->ddocfunc.language == HP_LANGUAGE_CPLUSPLUS) {
+
+        /* SYMBOL_INIT_DEMANGLED_NAME is a macro which winds up
+         * calling the demangler in libiberty (cplus_demangle()) to
+         * do the job. This generally does the job, even though
+         * it's intended for the GNU compiler and not the aCC compiler
+         * Note that SYMBOL_INIT_DEMANGLED_NAME calls the
+         * demangler with arguments DMGL_PARAMS | DMGL_ANSI.
+         * Generally, we don't want params when we display
+         * a demangled name, but when I took out the DMGL_PARAMS,
+         * some things broke, so I'm leaving it in here, and
+         * working around the issue in stack.c. - RT 
+         */
+        SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+
+        if ((SYMBOL_NAME (sym) == VT (objfile) + dn_bufp->ddocfunc.alias) &&
+           (!SYMBOL_CPLUS_DEMANGLED_NAME(sym))) {
+
+          /* Well, the symbol name is mangled, but the
+           * demangler in libiberty failed so the demangled
+           * field is still NULL. Try to
+           * do the job ourselves based on the "name" field
+           * in the SOM record. A complication here is that
+           * the name field contains only the function name
+           * (like "f"), whereas we want the class qualification
+           * (as in "c::f"). Try to reconstruct that.
+           */          
+          char * basename;
+          char * classname;
+          char * dem_name;
+          basename = VT (objfile) + dn_bufp->ddocfunc.name;
+          classname = class_of(SYMBOL_TYPE(sym));
+          if (classname) {
+            dem_name = xmalloc(strlen(basename)+strlen(classname)+3);
+            strcpy(dem_name, classname);
+            strcat(dem_name, "::");
+            strcat(dem_name, basename);
+            SYMBOL_CPLUS_DEMANGLED_NAME(sym) = dem_name;
+            SYMBOL_LANGUAGE (sym) = language_cplus;
+          }
+        }
+      }
+
+      /* Add the function symbol to the list of symbols in this blockvector */
+      if (dn_bufp->ddocfunc.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      new->name = sym;
+
+      /* Search forward to the next BEGIN and also read
+       * in the line info up to that point. 
+       * Not sure why this is needed.
+       * In HP FORTRAN this code is harmful since there   
+       * may not be a BEGIN after the FUNCTION.
+       * So I made it C/C++ specific. - RT
+       */
+      if (dn_bufp->ddocfunc.language == HP_LANGUAGE_C ||
+          dn_bufp->ddocfunc.language == HP_LANGUAGE_CPLUSPLUS) {
+        while (dn_bufp->dblock.kind != DNTT_TYPE_BEGIN)
+	  {
+	  dn_bufp = hpread_get_lntt (++index, objfile);
+	  if (dn_bufp->dblock.extension)
+	    continue;
+	  }
+        SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+  						  SL_INDEX (objfile),
+						  dn_bufp->dbegin.address,
+						  objfile, offset);
+        SYMBOL_LINE (sym) = hpread_get_line (dn_bufp->dbegin.address, objfile);
+      }
+      record_line (current_subfile, SYMBOL_LINE (sym), valu);
+      break;
+
+    case DNTT_TYPE_BEGIN:
+      /* Begin a new scope. */
+      if (context_stack_depth == 1 /* this means we're at function level */ &&
+          context_stack[0].name != NULL /* this means it's a function */ &&
+          context_stack[0].depth == 0 /* this means it's the first BEGIN 
+                                         we've seen after the FUNCTION */ 
+         )
+      {
+        /* This is the first BEGIN after a FUNCTION.
+         * We ignore this one, since HP compilers always insert
+         * at least one BEGIN, i.e. it's:
+         * 
+         *     FUNCTION
+         *     argument symbols
+         *     BEGIN
+         *     local symbols
+         *        (possibly nested BEGIN ... END's if there are inner { } blocks)
+         *     END
+         *     END
+         *
+         * By ignoring this first BEGIN, the local symbols get treated
+         * as belonging to the function scope, and "print func::local_sym"
+         * works (which is what we want).
+         */
+
+        /* All we do here is increase the depth count associated with
+         * the FUNCTION entry in the context stack. This ensures that
+         * the next BEGIN we see (if any), representing a real nested { }
+         * block, will get processed.
+         */ 
+
+         context_stack[0].depth++;
+
+      } else { 
+
+        /* Record lines up to this SLT pointer. */
+        SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+                      			 	  SL_INDEX (objfile),
+						  dn_bufp->dbegin.address,
+						  objfile, offset);
+        /* Calculate start address of new scope */
+        valu = hpread_get_location (dn_bufp->dbegin.address, objfile);
+        valu += offset;		/* Relocate for dynamic loading */
+        /* We use the scope start DNTT index as nesting depth identifier! */
+        desc = hpread_get_scope_start (dn_bufp->dbegin.address, objfile);
+        new = push_context (desc, valu);
+      }
+      break;
+
+    case DNTT_TYPE_END:
+      /* End a scope.  */
+
+      /* Valid end kinds are:
+       *  MODULE
+       *  FUNCTION
+       *  WITH
+       *  COMMON
+       *  BEGIN
+       *  CLASS_SCOPE
+       */
+
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dend.address,
+						objfile, offset);
+      switch (dn_bufp->dend.endkind)
+	{
+	case DNTT_TYPE_MODULE:
+	  /* Ending a module ends the symbol table for that module.  
+           * Calling end_symtab() has the side effect of clearing the
+           * last_source_file pointer, which in turn signals 
+           * process_one_debug_symbol() to treat the next DNTT_TYPE_SRCFILE
+           * record as a module-begin.
+           */
+	  valu = text_offset + text_size + offset;
+
+          /* Tell our caller that we're done with expanding the
+           * debug information for a module.
+           */
+          *at_module_boundary_p = 1;
+
+          /* Don't do this, as our caller will do it!
+           *
+           *	  (void) end_symtab (valu, objfile, 0);
+           */
+	  break;
+
+	case DNTT_TYPE_FUNCTION:
+	  /* Ending a function, well, ends the function's scope.  */
+	  dn_temp = hpread_get_lntt (dn_bufp->dend.beginscope.dnttp.index,
+				     objfile);
+	  valu = dn_temp->dfunc.hiaddr + offset;
+          /* Insert func params into local list */ 
+          merge_symbol_lists (&param_symbols, &local_symbols);
+	  new = pop_context ();
+	  /* Make a block for the local symbols within.  */
+	  finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, valu, objfile);
+	  WITHIN_FUNCTION (objfile) = 0; /* This may have to change for Pascal */ 
+          local_symbols = new->locals;
+          param_symbols = new->params;
+	  break;
+
+	case DNTT_TYPE_BEGIN:
+          if (context_stack_depth == 1 &&
+              context_stack[0].name != NULL &&
+              context_stack[0].depth == 1)         
+          {
+            /* This is the END corresponding to the
+             * BEGIN which we ignored - see DNTT_TYPE_BEGIN case above.
+             */
+            context_stack[0].depth--;
+          } else {
+	    /* Ending a local scope.  */
+	    valu = hpread_get_location (dn_bufp->dend.address, objfile);
+	    /* Why in the hell is this needed?  */
+	    valu += offset + 9;	/* Relocate for dynamic loading */
+	    new = pop_context ();
+	    desc = dn_bufp->dend.beginscope.dnttp.index;
+	    if (desc != new->depth)
+	      complain (&lbrac_mismatch_complaint, (char *) symnum);
+
+	    /* Make a block for the local symbols within.  */
+	    finish_block (new->name, &local_symbols, new->old_blocks,
+	                  new->start_addr, valu, objfile);
+	    local_symbols = new->locals;
+	    param_symbols = new->params;
+          }
+	  break;
+
+        case DNTT_TYPE_WITH:
+          /* Since we ignore the DNTT_TYPE_WITH that starts the scope,
+           * we can ignore the DNTT_TYPE_END that ends it.
+           */
+	  break;
+
+        case DNTT_TYPE_COMMON:
+          /* End a FORTRAN common block. We don't currently handle these */
+          complain (&hpread_unhandled_end_common_complaint);
+	  break;
+
+        case DNTT_TYPE_CLASS_SCOPE: 
+
+         /* pai: FIXME Not handling nested classes for now -- must
+           * maintain a stack */
+          class_scope_name = NULL;
+
+#if 0
+          /* End a class scope */
+	  valu = hpread_get_location (dn_bufp->dend.address, objfile);
+	  /* Why in the hell is this needed?  */
+	  valu += offset + 9;	/* Relocate for dynamic loading */
+	  new = pop_context ();
+	  desc = dn_bufp->dend.beginscope.dnttp.index;
+	  if (desc != new->depth)
+	    complain (&lbrac_mismatch_complaint, (char *) symnum);
+	  /* Make a block for the local symbols within.  */
+	  finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, valu, objfile);
+	  local_symbols = new->locals;
+	  param_symbols = new->params;
+#endif
+	  break;
+
+        default:
+          complain (&hpread_unexpected_end_complaint);
+          break;
+	}
+      break;
+
+    /* DNTT_TYPE_IMPORT is not handled */
+
+    case DNTT_TYPE_LABEL:
+      SYMBOL_NAMESPACE (sym) = LABEL_NAMESPACE;
+      break;
+
+    case DNTT_TYPE_FPARAM:
+      /* Function parameters.  */
+      /* Note 1: This code was present in the 4.16 sources, and then
+         removed, because fparams are handled in
+         hpread_read_function_type().  However, while fparam symbols
+         are indeed handled twice, this code here cannot be removed
+         because then they don't get added to the local symbol list of
+         the function's code block, which leads to a failure to look
+         up locals, "this"-relative member names, etc.  So I've put
+         this code back in. pai/1997-07-21 */
+      /* Note 2: To fix a defect, we stopped adding FPARAMS to local_symbols
+         in hpread_read_function_type(), so FPARAMS had to be handled
+         here.  I changed the location to be the appropriate argument
+         kinds rather than LOC_LOCAL. pai/1997-08-08 */
+      /* Note 3: Well, the fix in Note 2 above broke argument printing
+         in traceback frames, and further it makes assumptions about the
+         order of the FPARAM entries from HP compilers (cc and aCC in particular
+         generate them in reverse orders -- fixing one breaks for the other).
+         So I've added code in hpread_read_function_type() to add fparams
+         to a param_symbols list for the current context level.  These are
+         then merged into local_symbols when a function end is reached.
+         pai/1997-08-11 */ 
+         
+      break; /* do nothing; handled in hpread_read_function_type() */ 
+      
+#if 0 /* Old code */ 
+      if (dn_bufp->dfparam.regparam)
+        SYMBOL_CLASS (sym) = LOC_REGISTER;
+      else if (dn_bufp->dfparam.indirect)
+	SYMBOL_CLASS (sym) = LOC_REF_ARG;
+      else
+	SYMBOL_CLASS (sym) = LOC_ARG;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (dn_bufp->dfparam.copyparam)
+        {
+          SYMBOL_VALUE (sym) = dn_bufp->dfparam.location;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+          SYMBOL_VALUE (sym)
+            += HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+        }
+      else
+        SYMBOL_VALUE (sym) = dn_bufp->dfparam.location;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dfparam.type, objfile);
+      add_symbol_to_list (sym, &fparam_symbols);
+      break;
+#endif
+
+    case DNTT_TYPE_SVAR:
+      /* Static variables.  */
+      SYMBOL_CLASS (sym) = LOC_STATIC; 
+
+      /* Note: There is a case that arises with globals in shared
+       * libraries where we need to set the address to LOC_INDIRECT.
+       * This case is if you have a global "g" in one library, and
+       * it is referenced "extern <type> g;" in another library.
+       * If we're processing the symbols for the referencing library,
+       * we'll see a global "g", but in this case the address given
+       * in the symbol table contains a pointer to the real "g".
+       * We use the storage class LOC_INDIRECT to indicate this. RT
+       */
+      if (is_in_import_list (SYMBOL_NAME(sym), objfile))
+        SYMBOL_CLASS (sym) = LOC_INDIRECT;
+
+      SYMBOL_VALUE_ADDRESS (sym) = dn_bufp->dsvar.location + data_offset;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dsvar.type, objfile);
+
+      if (dn_bufp->dsvar.global)
+	add_symbol_to_list (sym, &global_symbols);
+        
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+        
+      else
+	add_symbol_to_list (sym, &file_symbols);
+
+      if (dn_bufp->dsvar.thread_specific)
+        {
+          /* Thread-local variable.
+           */
+          SYMBOL_CLASS (sym)   = LOC_THREAD_LOCAL_STATIC;
+          SYMBOL_BASEREG (sym) = CR27_REGNUM;
+
+          if( objfile->flags & OBJF_SHARED ) {
+              /*
+               * This variable is not only thread local but
+               * in a shared library.
+               *
+               * Alas, the shared lib structures are private
+               * to "somsolib.c".  But C lets us point to one.
+               */
+              struct so_list *so;
+
+              if( objfile->obj_private == NULL )
+                  error( "Internal error in reading shared library information." );
+
+              so = ((obj_private_data_t *)(objfile->obj_private))->so_info;
+              if( so == NULL )
+                  error( "Internal error in reading shared library information." );
+
+              /* Thread-locals in shared libraries do NOT have the
+               * standard offset ("data_offset"), so we re-calculate
+               * where to look for this variable, using a call-back
+               * to interpret the private shared-library data.
+               */
+              SYMBOL_VALUE_ADDRESS(sym) = dn_bufp->dsvar.location +
+                                             so_lib_thread_start_addr( so );
+          }
+        }
+      break;
+
+    case DNTT_TYPE_DVAR:
+      /* Dynamic variables.  */
+      if (dn_bufp->ddvar.regvar)
+	SYMBOL_CLASS (sym) = LOC_REGISTER;
+      else
+	SYMBOL_CLASS (sym) = LOC_LOCAL;
+        
+      SYMBOL_VALUE (sym) = dn_bufp->ddvar.location;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+      SYMBOL_VALUE (sym)
+	+= HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->ddvar.type, objfile);
+      if (dn_bufp->ddvar.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case DNTT_TYPE_CONST:
+      /* A constant (pascal?).  */
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_VALUE (sym) = dn_bufp->dconst.location;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dconst.type, objfile);
+      if (dn_bufp->dconst.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case DNTT_TYPE_TYPEDEF:
+      /* A typedef. We do want to process these, since a name is
+       * added to the namespace for the typedef'ed name.
+       */
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dtype.type, objfile);
+      if (dn_bufp->dtype.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case DNTT_TYPE_TAGDEF:
+      {
+      int global = dn_bufp->dtag.global;
+      /* Structure, union, enum, template, or class tag definition */
+      /* We do want to process these, since a name is
+       * added to the namespace for the tag name (and if C++ class,
+       * for the typename also).
+       */
+      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+
+      /* The tag contains in its "type" field a pointer to the
+       * DNTT_TYPE_STRUCT, DNTT_TYPE_UNION, DNTT_TYPE_ENUM, 
+       * DNTT_TYPE_CLASS or DNTT_TYPE_TEMPLATE
+       * record that actually defines the type.
+       */
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dtype.type, objfile);
+      TYPE_NAME (sym->type) = SYMBOL_NAME (sym);
+      TYPE_TAG_NAME (sym->type) = SYMBOL_NAME (sym);
+      if (dn_bufp->dtag.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+
+      /* If this is a C++ class, then we additionally 
+       * need to define a typedef for the
+       * class type. E.g., so that the name "c" becomes visible as
+       * a type name when the user says "class c { ... }".
+       * In order to figure this out, we need to chase down the "type"
+       * field to get to the DNTT_TYPE_CLASS record. 
+       *
+       * We also add the typename for ENUM. Though this isn't
+       * strictly correct, it is necessary because of the debug info
+       * generated by the aCC compiler, in which we cannot
+       * distinguish between:
+       *   enum e { ... };
+       * and
+       *   typedef enum { ... } e;
+       * I.e., the compiler emits the same debug info for the above
+       * two cases, in both cases "e" appearing as a tagdef.
+       * Therefore go ahead and generate the typename so that
+       * "ptype e" will work in the above cases.
+       *
+       * We also add the typename for TEMPLATE, so as to allow "ptype t"
+       * when "t" is a template name. 
+       */
+      if (dn_bufp->dtype.type.dnttp.index < LNTT_SYMCOUNT (objfile))
+        dn_bufp = hpread_get_lntt (dn_bufp->dtag.type.dnttp.index, objfile);
+      else {
+        complain (&hpread_tagdef_complaint);
+        return;
+      }
+      if (dn_bufp->dblock.kind == DNTT_TYPE_CLASS ||
+          dn_bufp->dblock.kind == DNTT_TYPE_ENUM ||
+          dn_bufp->dblock.kind == DNTT_TYPE_TEMPLATE) {
+        struct symbol *newsym;
+        
+        newsym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+	             				  sizeof (struct symbol));
+        memset (newsym, 0, sizeof (struct symbol));
+        SYMBOL_NAME (newsym) = name;
+        SYMBOL_LANGUAGE (newsym) = language_auto;
+        SYMBOL_NAMESPACE (newsym) = VAR_NAMESPACE;
+        SYMBOL_LINE (newsym) = 0;
+        SYMBOL_VALUE (newsym) = 0;
+        SYMBOL_CLASS (newsym) = LOC_TYPEDEF;
+        SYMBOL_TYPE (newsym) = sym->type;
+        if (global)
+  	  add_symbol_to_list (newsym, &global_symbols);
+        else if (WITHIN_FUNCTION (objfile))
+  	  add_symbol_to_list (newsym, &local_symbols);
+        else
+  	  add_symbol_to_list (newsym, &file_symbols);
+      }
+      }
+      break;
+
+    case DNTT_TYPE_POINTER:
+      /* Declares a pointer type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_ENUM:
+      /* Declares an enum type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_MEMENUM:
+      /* Member of enum */
+      /* Ignored at this level, but hpread_read_enum_type() will take
+       * care of walking the list of enumeration members.
+       */
+      break;
+
+    case DNTT_TYPE_SET:
+      /* Declares a set type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_SUBRANGE:
+      /* Declares a subrange type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_ARRAY:
+      /* Declares an array type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+      /* Declares an struct/union type. 
+       * Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_FIELD:
+      /* Structure/union/class field */
+      /* Ignored at this level, but hpread_read_struct_type() will take
+       * care of walking the list of structure/union/class members.
+       */
+      break;
+
+    /* DNTT_TYPE_VARIANT is not handled by GDB */
+
+    /* DNTT_TYPE_FILE is not handled by GDB */
+
+    case DNTT_TYPE_FUNCTYPE:
+      /* Function type */
+      /* Ignored at this level, handled within hpread_type_lookup() */
+      break;
+
+    case DNTT_TYPE_WITH:
+      /* This is emitted within methods to indicate "with <class>" 
+       * scoping rules (i.e., indicate that the class data members
+       * are directly visible).
+       * However, since GDB already infers this by looking at the
+       * "this" argument, interpreting the DNTT_TYPE_WITH 
+       * symbol record is unnecessary.
+       */
+      break;
+
+    case DNTT_TYPE_COMMON:
+      /* FORTRAN common. Not yet handled. */
+      complain (&hpread_unhandled_common_complaint);
+      break;
+
+    /* DNTT_TYPE_COBSTRUCT is not handled by GDB.  */
+    /* DNTT_TYPE_XREF is not handled by GDB.  */
+    /* DNTT_TYPE_SA is not handled by GDB.  */
+    /* DNTT_TYPE_MACRO is not handled by GDB */
+
+    case DNTT_TYPE_BLOCKDATA:
+      /* Not sure what this is - part of FORTRAN support maybe? 
+       * Anyway, not yet handled.
+       */
+      complain (&hpread_unhandled_blockdata_complaint);
+      break;
+
+    case DNTT_TYPE_CLASS_SCOPE:
+
+
+
+      /* The compiler brackets member functions with a CLASS_SCOPE/END
+       * pair of records, presumably to put them in a different scope
+       * from the module scope where they are normally defined.
+       * E.g., in the situation:
+       *   void f() { ... }
+       *   void c::f() { ...}
+       * The member function "c::f" will be bracketed by a CLASS_SCOPE/END.
+       * This causes "break f" at the module level to pick the
+       * the file-level function f(), not the member function
+       * (which needs to be referenced via "break c::f"). 
+       * 
+       * Here we record the class name to generate the demangled names of
+       * member functions later.
+       *
+       * FIXME Not being used now for anything -- cplus_demangle seems
+       * enough for getting the class-qualified names of functions. We
+       * may need this for handling nested classes and types.  */
+
+      /* pai: FIXME Not handling nested classes for now -- need to
+       * maintain a stack */
+
+      dn_temp = hpread_get_lntt (dn_bufp->dclass_scope.type.dnttp.index, objfile);
+      if (dn_temp->dblock.kind == DNTT_TYPE_TAGDEF)
+        class_scope_name = VT (objfile) + dn_temp->dtag.name;
+      else
+        class_scope_name = NULL;
+
+#if 0
+
+      /* Begin a new scope.  */
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dclass_scope.address,
+						objfile, offset);
+      valu = hpread_get_location (dn_bufp->dclass_scope.address, objfile);
+      valu += offset;		/* Relocate for dynamic loading */
+      desc = hpread_get_scope_start (dn_bufp->dclass_scope.address, objfile);
+      /* We use the scope start DNTT index as the nesting depth identifier! */
+      new = push_context (desc, valu);
+#endif
+      break;
+
+    case DNTT_TYPE_REFERENCE:
+      /* Declares a C++ reference type. Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level.
+       */
+      break;
+
+    case DNTT_TYPE_PTRMEM:
+      /* Declares a C++ pointer-to-data-member type. This does not
+       * need to be handled at this level; being a type description it
+       * is instead handled at the hpread_type_lookup() level.
+       */
+      break;
+
+    case DNTT_TYPE_PTRMEMFUNC:
+      /* Declares a C++ pointer-to-function-member type. This does not
+       * need to be handled at this level; being a type description it
+       * is instead handled at the hpread_type_lookup() level.
+       */
+      break;
+
+    case DNTT_TYPE_CLASS:
+      /* Declares a class type. 
+       * Should not be necessary to do anything
+       * with the type at this level; these are processed
+       * at the hpread_type_lookup() level. 
+       */
+      break;
+
+    case DNTT_TYPE_GENFIELD:
+      /* I believe this is used for class member functions */
+      /* Ignored at this level, but hpread_read_struct_type() will take
+       * care of walking the list of class members.
+       */
+      break;
+
+    case DNTT_TYPE_VFUNC:
+      /* Virtual function */
+      /* This does not have to be handled at this level; handled in
+       * the course of processing class symbols.
+       */
+      break;
+
+    case DNTT_TYPE_MEMACCESS:
+      /* DDE ignores this symbol table record.
+       * It has something to do with "modified access" to class members.
+       * I'll assume we can safely ignore it too.
+       */
+      break;
+
+    case DNTT_TYPE_INHERITANCE:
+      /* These don't have to be handled here, since they are handled
+       * within hpread_read_struct_type() in the process of constructing
+       * a class type.
+       */
+      break;
+
+    case DNTT_TYPE_FRIEND_CLASS:
+    case DNTT_TYPE_FRIEND_FUNC:
+      /* These can safely be ignored, as GDB doesn't need this
+       * info. DDE only uses it in "describe". We may later want
+       * to extend GDB's "ptype" to give this info, but for now
+       * it seems safe enough to ignore it.
+       */  
+      break;
+
+    case DNTT_TYPE_MODIFIER:
+      /* Intended to supply "modified access" to a type */
+      /* From the way DDE handles this, it looks like it always
+       * modifies a type. Therefore it is safe to ignore it at this
+       * level, and handle it in hpread_type_lookup().
+       */
+      break;
+
+    case DNTT_TYPE_OBJECT_ID:
+      /* Just ignore this - that's all DDE does */
+      break;
+
+    case DNTT_TYPE_MEMFUNC:
+      /* Member function */
+      /* This does not have to be handled at this level; handled in
+       * the course of processing class symbols.
+       */
+      break;
+
+    case DNTT_TYPE_DOC_MEMFUNC:
+      /* Member function */
+      /* This does not have to be handled at this level; handled in
+       * the course of processing class symbols.
+       */
+      break;
+
+    case DNTT_TYPE_TEMPLATE:
+      /* Template - sort of the header for a template definition,
+       * which like a class, points to a member list and also points
+       * to a TEMPLATE_ARG list of type-arguments.
+       * We do not need to process TEMPLATE records at this level though.
+       */
+      break;
+
+    case DNTT_TYPE_TEMPLATE_ARG:
+      /* The TEMPLATE record points to an argument list of
+       * TEMPLATE_ARG records, each of which describes one
+       * of the type-arguments.
+       * We do not need to process TEMPLATE_ARG records at this level though.
+       */
+      break;
+
+    case DNTT_TYPE_FUNC_TEMPLATE:
+      /* This will get emitted for member functions of templates.
+       * But we don't need to process this record at this level though,
+       * we will process it in the course of processing a TEMPLATE
+       * record.
+       */
+      break;
+
+    case DNTT_TYPE_LINK:
+      /* The LINK record is used to link up templates with instantiations. */
+      /* It is not clear why this is needed, and furthermore aCC does
+       * not appear to generate this, so I think we can safely ignore it. - RT
+       */
+      break;
+
+    /* DNTT_TYPE_DYN_ARRAY_DESC is not handled by GDB */
+    /* DNTT_TYPE_DESC_SUBRANGE is not handled by GDB */
+    /* DNTT_TYPE_BEGIN_EXT is not handled by GDB */
+    /* DNTT_TYPE_INLN is not handled by GDB */
+    /* DNTT_TYPE_INLN_LIST is not handled by GDB */
+    /* DNTT_TYPE_ALIAS is not handled by GDB */
+
+    default:
+      break;
+    }
+}
+
+/* Get nesting depth for a DNTT entry.
+ * DN_BUFP points to a DNTT entry.
+ * OBJFILE is the object file.
+ * REPORT_NESTED is a flag; if 0, real nesting depth is
+ * reported, if it is 1, the function simply returns a 
+ * non-zero value if the nesting depth is anything > 0.
+ * 
+ * Return value is an integer.  0 => not a local type / name
+ * positive return => type or name is local to some 
+ * block or function.
+ */ 
+
+
+/* elz: ATTENTION: FIXME: NOTE: WARNING!!!!
+   this function now returns 0 right away. It was taking too much time
+   at start up. Now, though, the local types are not handled correctly.
+*/
+
+
+static int
+hpread_get_scope_depth (dn_bufp, objfile, report_nested)
+  union dnttentry * dn_bufp;
+  struct objfile * objfile;
+  int  report_nested;
+{
+  register int index;
+  register union dnttentry * dn_tmp;
+  register short depth = 0;
+/****************************/
+  return 0;
+/****************************/
+
+  index = (((char *) dn_bufp) - LNTT (objfile)) / (sizeof (struct dntt_type_block));
+  
+  while (--index >= 0)
+    {
+      dn_tmp = hpread_get_lntt (index, objfile);
+      switch (dn_tmp->dblock.kind)
+        {
+          case DNTT_TYPE_MODULE:
+            return depth;
+          case DNTT_TYPE_END:
+            /* index is signed int; dnttp.index is 29-bit unsigned int! */
+            index = (int) dn_tmp->dend.beginscope.dnttp.index;
+            break;
+          case DNTT_TYPE_BEGIN:
+          case DNTT_TYPE_FUNCTION:
+          case DNTT_TYPE_DOC_FUNCTION:
+          case DNTT_TYPE_WITH:   
+          case DNTT_TYPE_COMMON: 
+          case DNTT_TYPE_CLASS_SCOPE:
+            depth++;
+            if (report_nested)
+              return 1;
+            break;
+          default:
+            break;
+        }
+    }
+  return depth;
+}
+
+/* Adjust the bitoffsets for all fields of an anonymous union of
+   type TYPE by negative BITS.  This handles HP aCC's hideous habit
+   of giving members of anonymous unions bit offsets relative to the
+   enclosing structure instead of relative to the union itself. */  
+
+static void
+hpread_adjust_bitoffsets (type, bits)
+  struct type * type;
+  int bits;
+{
+  register int i;
+
+  /* This is done only for unions; caller had better check that
+     it is an anonymous one. */ 
+  if (TYPE_CODE (type) != TYPE_CODE_UNION)
+    return;
+
+  /* Adjust each field; since this is a union, there are no base
+     classes. Also no static membes.  Also, no need for recursion as
+     the members of this union if themeselves structs or unions, have
+     the correct bitoffsets; if an anonymous union is a member of this
+     anonymous union, the code in hpread_read_struct_type() will
+     adjust for that. */
+
+  for (i = 0; i < TYPE_NFIELDS (type); i++)
+    TYPE_FIELD_BITPOS (type, i) -= bits;
+}
+
+/* Because of quirks in HP compilers' treatment of anonymous unions inside
+   classes, we have to chase through a chain of threaded FIELD entries.
+   If we encounter an anonymous union in the chain, we must recursively skip over
+   that too.
+
+   This function does a "next" in the chain of FIELD entries, but transparently
+   skips over anonymous unions' fields (recursively).
+   
+   Inputs are the number of times to do "next" at the top level, the dnttpointer
+   (FIELD) and entry pointer (FIELDP) for the dntt record corresponding to it,
+   and the ubiquitous objfile parameter. (Note: FIELDP is a **.)  Return value
+   is a dnttpointer for the new field after all the skipped ones */
+
+static dnttpointer
+hpread_get_next_skip_over_anon_unions (skip_fields, field, fieldp, objfile)
+  int skip_fields;
+  dnttpointer field;
+  union dnttentry ** fieldp;
+  struct objfile * objfile;
+{
+  struct type * anon_type;
+  register int i;
+  int bitoffset;
+  char * name;
+
+  for (i=0; i < skip_fields; i++)
+    {
+      /* Get type of item we're looking at now; recursively processes the types
+         of these intermediate items we skip over, so they aren't lost. */
+      anon_type = hpread_type_lookup ((*fieldp)->dfield.type, objfile);
+      anon_type = CHECK_TYPEDEF (anon_type);
+      bitoffset = (*fieldp)->dfield.bitoffset;
+      name = VT (objfile) + (*fieldp)->dfield.name;
+      /* First skip over one item to avoid stack death on recursion */ 
+      field = (*fieldp)->dfield.nextfield;
+      *fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+      /* Do we have another anonymous union? If so, adjust the bitoffsets
+         of its members and skip over its members. */
+      if ((TYPE_CODE (anon_type) == TYPE_CODE_UNION) &&
+          (!name || STREQ (name, "")))
+        {
+          hpread_adjust_bitoffsets (anon_type, bitoffset);
+          field = hpread_get_next_skip_over_anon_unions (TYPE_NFIELDS (anon_type), field, fieldp, objfile);
+        }
+    }
+  return field;
+}
+
+
diff --git a/gdb/hp300ux-nat.c b/gdb/hp300ux-nat.c
new file mode 100644
index 0000000..38f68e1
--- /dev/null
+++ b/gdb/hp300ux-nat.c
@@ -0,0 +1,221 @@
+/* HP/UX native interface for HP 300's, for GDB when running under Unix.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+/* Defining this means some system include files define some extra stuff.  */
+#define WOPR
+#include <sys/param.h>
+#include <signal.h>
+#include <sys/user.h>
+#include <fcntl.h>
+
+#include <sys/ptrace.h>
+#include <sys/reg.h>
+#include <sys/trap.h>
+
+#include <sys/file.h>
+
+static void
+fetch_inferior_register PARAMS ((int, unsigned int));
+
+static void
+store_inferior_register_1 PARAMS ((int, unsigned int, int));
+
+static void
+store_inferior_register PARAMS ((int, unsigned int));
+
+/* Get kernel_u_addr using HPUX-style nlist().  */
+CORE_ADDR kernel_u_addr;
+
+struct hpnlist {
+        char *          n_name;
+        long            n_value;
+        unsigned char   n_type;
+        unsigned char   n_length;
+        short           n_almod;
+        short           n_unused;
+};
+static struct hpnlist nl[] = {{ "_u", -1, }, { (char *) 0, }};
+
+/* read the value of the u area from the hp-ux kernel */
+void
+_initialize_hp300ux_nat ()
+{
+#ifndef HPUX_VERSION_5
+    nlist ("/hp-ux", nl);
+    kernel_u_addr = nl[0].n_value;
+#else /* HPUX version 5.  */
+    kernel_u_addr = (CORE_ADDR) 0x0097900;
+#endif
+}
+
+#define INFERIOR_AR0(u)							\
+  ((ptrace								\
+    (PT_RUAREA, inferior_pid,						\
+     (PTRACE_ARG3_TYPE) ((char *) &u.u_ar0 - (char *) &u), 0, 0))		\
+   - kernel_u_addr)
+
+static void
+fetch_inferior_register (regno, regaddr)
+     register int regno;
+     register unsigned int regaddr;
+{
+#ifndef HPUX_VERSION_5
+  if (regno == PS_REGNUM)
+    {
+      union { int i; short s[2]; } ps_val;
+      int regval;
+      
+      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+			  0, 0));
+      regval = ps_val.s[0];
+      supply_register (regno, (char *)&regval);
+    }
+  else
+#endif /* not HPUX_VERSION_5 */
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+      register int i;
+      
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+	{
+	  *(int *) &buf[i] = ptrace (PT_RUAREA, inferior_pid,
+				     (PTRACE_ARG3_TYPE) regaddr, 0, 0);
+	  regaddr += sizeof (int);
+	}
+      supply_register (regno, buf);
+    }
+  return;
+}
+
+static void
+store_inferior_register_1 (regno, regaddr, val)
+     int regno;
+     unsigned int regaddr;
+     int val;
+{
+  errno = 0;
+  ptrace (PT_WUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr, val, 0);
+#if 0
+  /* HP-UX randomly sets errno to non-zero for regno == 25.
+     However, the value is correctly written, so ignore errno. */
+  if (errno != 0)
+    {
+      char string_buf[64];
+      
+      sprintf (string_buf, "writing register number %d", regno);
+      perror_with_name (string_buf);
+    }
+#endif
+  return;
+}
+
+static void
+store_inferior_register (regno, regaddr)
+     register int regno;
+     register unsigned int regaddr;
+{
+#ifndef HPUX_VERSION_5
+  if (regno == PS_REGNUM)
+    {
+      union { int i; short s[2]; } ps_val;
+      
+      ps_val.i = (ptrace (PT_RUAREA, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+			  0, 0));
+      ps_val.s[0] = (read_register (regno));
+      store_inferior_register_1 (regno, regaddr, ps_val.i);
+    }
+  else
+#endif /* not HPUX_VERSION_5 */
+    {
+      register int i;
+      extern char registers[];
+      
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+	{
+	  store_inferior_register_1
+	    (regno, regaddr,
+	     (*(int *) &registers[(REGISTER_BYTE (regno)) + i]));
+	  regaddr += sizeof (int);
+	}
+    }
+  return;
+}
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  struct user u;
+  register unsigned int ar0_offset;
+  
+  ar0_offset = (INFERIOR_AR0 (u));
+  if (regno == -1)
+    {
+      for (regno = 0; (regno < FP0_REGNUM); regno++)
+	fetch_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
+      for (; (regno < NUM_REGS); regno++)
+	fetch_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
+    }
+  else
+    fetch_inferior_register (regno,
+			     (regno < FP0_REGNUM
+			      ? REGISTER_ADDR (ar0_offset, regno)
+			      : FP_REGISTER_ADDR (u, regno)));
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     register int regno;
+{
+  struct user u;
+  register unsigned int ar0_offset;
+
+  if (regno >= FP0_REGNUM)
+    {
+      store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
+      return;
+    }
+  
+  ar0_offset = (INFERIOR_AR0 (u));
+  if (regno >= 0)
+    {
+      store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
+      return;
+    }
+
+  for (regno = 0; (regno < FP0_REGNUM); regno++)
+    store_inferior_register (regno, (REGISTER_ADDR (ar0_offset, regno)));
+  for (; (regno < NUM_REGS); regno++)
+    store_inferior_register (regno, (FP_REGISTER_ADDR (u, regno)));
+  return;
+}
+
+int
+getpagesize ()
+{
+  return 4096;
+}
diff --git a/gdb/hppa-tdep.c b/gdb/hppa-tdep.c
new file mode 100644
index 0000000..d911750
--- /dev/null
+++ b/gdb/hppa-tdep.c
@@ -0,0 +1,4445 @@
+/* Target-dependent code for the HP PA architecture, for GDB.
+   Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 1999
+   Free Software Foundation, Inc.
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "bfd.h"
+#include "inferior.h"
+#include "value.h"
+
+/* For argument passing to the inferior */
+#include "symtab.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <dl.h>
+#include <sys/param.h>
+#include <signal.h>
+
+#include <sys/ptrace.h>
+#include <machine/save_state.h>
+
+#ifdef COFF_ENCAPSULATE
+#include "a.out.encap.h"
+#else
+#endif
+
+/*#include <sys/user.h>		After a.out.h  */
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include "wait.h"
+
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+/* To support asking "What CPU is this?" */
+#include <unistd.h>
+
+/* To support detection of the pseudo-initial frame
+   that threads have. */
+#define THREAD_INITIAL_FRAME_SYMBOL  "__pthread_exit"
+#define THREAD_INITIAL_FRAME_SYM_LEN  sizeof(THREAD_INITIAL_FRAME_SYMBOL)
+ 
+static int extract_5_load PARAMS ((unsigned int));
+
+static unsigned extract_5R_store PARAMS ((unsigned int));
+
+static unsigned extract_5r_store PARAMS ((unsigned int));
+
+static void find_dummy_frame_regs PARAMS ((struct frame_info *,
+					   struct frame_saved_regs *));
+
+static int find_proc_framesize PARAMS ((CORE_ADDR));
+
+static int find_return_regnum PARAMS ((CORE_ADDR));
+
+struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR));
+
+static int extract_17 PARAMS ((unsigned int));
+
+static unsigned deposit_21 PARAMS ((unsigned int, unsigned int));
+
+static int extract_21 PARAMS ((unsigned));
+
+static unsigned deposit_14 PARAMS ((int, unsigned int));
+
+static int extract_14 PARAMS ((unsigned));
+
+static void unwind_command PARAMS ((char *, int));
+
+static int low_sign_extend PARAMS ((unsigned int, unsigned int));
+
+static int sign_extend PARAMS ((unsigned int, unsigned int));
+
+static int restore_pc_queue PARAMS ((struct frame_saved_regs *));
+
+static int hppa_alignof PARAMS ((struct type *));
+
+/* To support multi-threading and stepping. */
+int hppa_prepare_to_proceed PARAMS (());
+
+static int prologue_inst_adjust_sp PARAMS ((unsigned long));
+
+static int is_branch PARAMS ((unsigned long));
+
+static int inst_saves_gr PARAMS ((unsigned long));
+
+static int inst_saves_fr PARAMS ((unsigned long));
+
+static int pc_in_interrupt_handler PARAMS ((CORE_ADDR));
+
+static int pc_in_linker_stub PARAMS ((CORE_ADDR));
+
+static int compare_unwind_entries PARAMS ((const void *, const void *));
+
+static void read_unwind_info PARAMS ((struct objfile *));
+
+static void internalize_unwinds PARAMS ((struct objfile *,
+					 struct unwind_table_entry *,
+					 asection *, unsigned int,
+					 unsigned int, CORE_ADDR));
+static void pa_print_registers PARAMS ((char *, int, int));
+static void pa_strcat_registers PARAMS ((char *, int, int, GDB_FILE *));
+static void pa_register_look_aside PARAMS ((char *, int, long *));
+static void pa_print_fp_reg PARAMS ((int));
+static void pa_strcat_fp_reg PARAMS ((int, GDB_FILE *, enum precision_type));
+
+typedef struct {
+  struct minimal_symbol * msym;
+  CORE_ADDR solib_handle;
+} args_for_find_stub;
+
+static CORE_ADDR cover_find_stub_with_shl_get PARAMS ((args_for_find_stub *));
+
+static int is_pa_2 = 0;  /* False */
+
+/* This is declared in symtab.c; set to 1 in hp-symtab-read.c */ 
+extern int hp_som_som_object_present;
+
+/* In breakpoint.c */
+extern int exception_catchpoints_are_fragile;
+
+/* This is defined in valops.c. */
+extern value_ptr
+find_function_in_inferior PARAMS((char *));
+
+/* Should call_function allocate stack space for a struct return?  */
+int
+hppa_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 8);
+}
+
+
+/* Routines to extract various sized constants out of hppa 
+   instructions. */
+
+/* This assumes that no garbage lies outside of the lower bits of 
+   value. */
+
+static int
+sign_extend (val, bits)
+     unsigned val, bits;
+{
+  return (int)(val >> (bits - 1) ? (-1 << bits) | val : val);
+}
+
+/* For many immediate values the sign bit is the low bit! */
+
+static int
+low_sign_extend (val, bits)
+     unsigned val, bits;
+{
+  return (int)((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1);
+}
+
+/* extract the immediate field from a ld{bhw}s instruction */
+
+#if 0
+
+unsigned
+get_field (val, from, to)
+     unsigned val, from, to;
+{
+  val = val >> 31 - to;
+  return val & ((1 << 32 - from) - 1);
+}
+
+unsigned
+set_field (val, from, to, new_val)
+     unsigned *val, from, to;
+{
+  unsigned mask = ~((1 << (to - from + 1)) << (31 - from));
+  return *val = *val & mask | (new_val << (31 - from));
+}
+
+/* extract a 3-bit space register number from a be, ble, mtsp or mfsp */
+
+int
+extract_3 (word)
+     unsigned word;
+{
+  return GET_FIELD (word, 18, 18) << 2 | GET_FIELD (word, 16, 17);
+}
+
+#endif
+
+static int
+extract_5_load (word)
+     unsigned word;
+{
+  return low_sign_extend (word >> 16 & MASK_5, 5);
+}
+
+#if 0
+
+/* extract the immediate field from a st{bhw}s instruction */
+
+int
+extract_5_store (word)
+     unsigned word;
+{
+  return low_sign_extend (word & MASK_5, 5);
+}
+
+#endif	/* 0 */
+       
+/* extract the immediate field from a break instruction */
+
+static unsigned
+extract_5r_store (word)
+     unsigned word;
+{
+  return (word & MASK_5);
+}
+
+/* extract the immediate field from a {sr}sm instruction */
+
+static unsigned
+extract_5R_store (word)
+     unsigned word;
+{
+  return (word >> 16 & MASK_5);
+}
+
+/* extract an 11 bit immediate field */
+
+#if 0
+
+int
+extract_11 (word)
+     unsigned word;
+{
+  return low_sign_extend (word & MASK_11, 11);
+}
+
+#endif
+
+/* extract a 14 bit immediate field */
+
+static int
+extract_14 (word)
+     unsigned word;
+{
+  return low_sign_extend (word & MASK_14, 14);
+}
+
+/* deposit a 14 bit constant in a word */
+
+static unsigned
+deposit_14 (opnd, word)
+     int opnd;
+     unsigned word;
+{
+  unsigned sign = (opnd < 0 ? 1 : 0);
+
+  return word | ((unsigned)opnd << 1 & MASK_14)  | sign;
+}
+
+/* extract a 21 bit constant */
+
+static int
+extract_21 (word)
+     unsigned word;
+{
+  int val;
+
+  word &= MASK_21;
+  word <<= 11;
+  val = GET_FIELD (word, 20, 20);
+  val <<= 11;
+  val |= GET_FIELD (word, 9, 19);
+  val <<= 2;
+  val |= GET_FIELD (word, 5, 6);
+  val <<= 5;
+  val |= GET_FIELD (word, 0, 4);
+  val <<= 2;
+  val |= GET_FIELD (word, 7, 8);
+  return sign_extend (val, 21) << 11;
+}
+
+/* deposit a 21 bit constant in a word. Although 21 bit constants are
+   usually the top 21 bits of a 32 bit constant, we assume that only
+   the low 21 bits of opnd are relevant */
+
+static unsigned
+deposit_21 (opnd, word)
+     unsigned opnd, word;
+{
+  unsigned val = 0;
+
+  val |= GET_FIELD (opnd, 11 + 14, 11 + 18);
+  val <<= 2;
+  val |= GET_FIELD (opnd, 11 + 12, 11 + 13);
+  val <<= 2;
+  val |= GET_FIELD (opnd, 11 + 19, 11 + 20);
+  val <<= 11;
+  val |= GET_FIELD (opnd, 11 + 1, 11 + 11);
+  val <<= 1;
+  val |= GET_FIELD (opnd, 11 + 0, 11 + 0);
+  return word | val;
+}
+
+/* extract a 12 bit constant from branch instructions */
+
+#if 0
+
+int
+extract_12 (word)
+     unsigned word;
+{
+  return sign_extend (GET_FIELD (word, 19, 28) |
+		      GET_FIELD (word, 29, 29) << 10 |
+		      (word & 0x1) << 11, 12) << 2;
+}
+
+/* Deposit a 17 bit constant in an instruction (like bl). */
+
+unsigned int
+deposit_17 (opnd, word)
+     unsigned opnd, word;
+{
+  word |= GET_FIELD (opnd, 15 + 0, 15 + 0); /* w */
+  word |= GET_FIELD (opnd, 15 + 1, 15 + 5) << 16; /* w1 */
+  word |= GET_FIELD (opnd, 15 + 6, 15 + 6) << 2; /* w2[10] */
+  word |= GET_FIELD (opnd, 15 + 7, 15 + 16) << 3; /* w2[0..9] */
+
+  return word;
+}
+
+#endif
+
+/* extract a 17 bit constant from branch instructions, returning the
+   19 bit signed value. */
+
+static int
+extract_17 (word)
+     unsigned word;
+{
+  return sign_extend (GET_FIELD (word, 19, 28) |
+		      GET_FIELD (word, 29, 29) << 10 |
+		      GET_FIELD (word, 11, 15) << 11 |
+		      (word & 0x1) << 16, 17) << 2;
+}
+
+
+/* Compare the start address for two unwind entries returning 1 if 
+   the first address is larger than the second, -1 if the second is
+   larger than the first, and zero if they are equal.  */
+
+static int
+compare_unwind_entries (arg1, arg2)
+     const void *arg1;
+     const void *arg2;
+{
+  const struct unwind_table_entry *a = arg1;
+  const struct unwind_table_entry *b = arg2;
+
+  if (a->region_start > b->region_start)
+    return 1;
+  else if (a->region_start < b->region_start)
+    return -1;
+  else
+    return 0;
+}
+
+static void
+internalize_unwinds (objfile, table, section, entries, size, text_offset)
+     struct objfile *objfile;
+     struct unwind_table_entry *table;
+     asection *section;
+     unsigned int entries, size;
+     CORE_ADDR text_offset;
+{
+  /* We will read the unwind entries into temporary memory, then
+     fill in the actual unwind table.  */
+  if (size > 0)
+    {
+      unsigned long tmp;
+      unsigned i;
+      char *buf = alloca (size);
+
+      bfd_get_section_contents (objfile->obfd, section, buf, 0, size);
+
+      /* Now internalize the information being careful to handle host/target
+	 endian issues.  */
+      for (i = 0; i < entries; i++)
+	{
+	  table[i].region_start = bfd_get_32 (objfile->obfd,
+					      (bfd_byte *)buf);
+	  table[i].region_start += text_offset;
+	  buf += 4;
+	  table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+	  table[i].region_end += text_offset;
+	  buf += 4;
+	  tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+	  buf += 4;
+	  table[i].Cannot_unwind = (tmp >> 31) & 0x1;
+	  table[i].Millicode = (tmp >> 30) & 0x1;
+	  table[i].Millicode_save_sr0 = (tmp >> 29) & 0x1;
+	  table[i].Region_description = (tmp >> 27) & 0x3;
+	  table[i].reserved1 = (tmp >> 26) & 0x1;
+	  table[i].Entry_SR = (tmp >> 25) & 0x1;
+	  table[i].Entry_FR = (tmp >> 21) & 0xf;
+	  table[i].Entry_GR = (tmp >> 16) & 0x1f;
+	  table[i].Args_stored = (tmp >> 15) & 0x1;
+	  table[i].Variable_Frame = (tmp >> 14) & 0x1;
+	  table[i].Separate_Package_Body = (tmp >> 13) & 0x1;
+	  table[i].Frame_Extension_Millicode = (tmp >> 12) & 0x1;
+	  table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1;
+	  table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1;
+	  table[i].Ada_Region = (tmp >> 9) & 0x1;
+	  table[i].cxx_info = (tmp >> 8) & 0x1;
+	  table[i].cxx_try_catch = (tmp >> 7) & 0x1;
+	  table[i].sched_entry_seq = (tmp >> 6) & 0x1;
+	  table[i].reserved2 = (tmp >> 5) & 0x1;
+	  table[i].Save_SP = (tmp >> 4) & 0x1;
+	  table[i].Save_RP = (tmp >> 3) & 0x1;
+	  table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1;
+	  table[i].extn_ptr_defined = (tmp >> 1) & 0x1;
+	  table[i].Cleanup_defined = tmp & 0x1;
+	  tmp = bfd_get_32 (objfile->obfd, (bfd_byte *)buf);
+	  buf += 4;
+	  table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1;
+	  table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1;
+	  table[i].Large_frame = (tmp >> 29) & 0x1;
+	  table[i].Pseudo_SP_Set = (tmp >> 28) & 0x1;
+	  table[i].reserved4 = (tmp >> 27) & 0x1;
+	  table[i].Total_frame_size = tmp & 0x7ffffff;
+
+          /* Stub unwinds are handled elsewhere. */
+	  table[i].stub_unwind.stub_type = 0;
+	  table[i].stub_unwind.padding = 0;
+	}
+    }
+}
+
+/* Read in the backtrace information stored in the `$UNWIND_START$' section of
+   the object file.  This info is used mainly by find_unwind_entry() to find
+   out the stack frame size and frame pointer used by procedures.  We put
+   everything on the psymbol obstack in the objfile so that it automatically
+   gets freed when the objfile is destroyed.  */
+
+static void
+read_unwind_info (objfile)
+     struct objfile *objfile;
+{
+  asection *unwind_sec, *elf_unwind_sec, *stub_unwind_sec;
+  unsigned unwind_size, elf_unwind_size, stub_unwind_size, total_size;
+  unsigned index, unwind_entries, elf_unwind_entries;
+  unsigned stub_entries, total_entries;
+  CORE_ADDR text_offset;
+  struct obj_unwind_info *ui;
+  obj_private_data_t *obj_private;
+
+  text_offset = ANOFFSET (objfile->section_offsets, 0);
+  ui = (struct obj_unwind_info *)obstack_alloc (&objfile->psymbol_obstack,
+						sizeof (struct obj_unwind_info));
+
+  ui->table = NULL;
+  ui->cache = NULL;
+  ui->last = -1;
+
+  /* Get hooks to all unwind sections.   Note there is no linker-stub unwind
+     section in ELF at the moment.  */
+  unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_START$");
+  elf_unwind_sec = bfd_get_section_by_name (objfile->obfd, ".PARISC.unwind");
+  stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$");
+
+  /* Get sizes and unwind counts for all sections.  */
+  if (unwind_sec)
+    {
+      unwind_size = bfd_section_size (objfile->obfd, unwind_sec);
+      unwind_entries = unwind_size / UNWIND_ENTRY_SIZE;
+    }
+  else
+    {
+      unwind_size = 0;
+      unwind_entries = 0;
+    }
+
+  if (elf_unwind_sec)
+    {
+      elf_unwind_size = bfd_section_size (objfile->obfd, elf_unwind_sec); /* purecov: deadcode */
+      elf_unwind_entries = elf_unwind_size / UNWIND_ENTRY_SIZE; /* purecov: deadcode */
+    }
+  else
+    {
+      elf_unwind_size = 0;
+      elf_unwind_entries = 0;
+    }
+
+  if (stub_unwind_sec)
+    {
+      stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec);
+      stub_entries = stub_unwind_size / STUB_UNWIND_ENTRY_SIZE;
+    }
+  else
+    {
+      stub_unwind_size = 0;
+      stub_entries = 0;
+    }
+
+  /* Compute total number of unwind entries and their total size.  */
+  total_entries = unwind_entries + elf_unwind_entries + stub_entries;
+  total_size = total_entries * sizeof (struct unwind_table_entry);
+
+  /* Allocate memory for the unwind table.  */
+  ui->table = (struct unwind_table_entry *)
+    obstack_alloc (&objfile->psymbol_obstack, total_size);
+   ui->last = total_entries - 1;
+
+  /* Internalize the standard unwind entries.  */
+  index = 0;
+  internalize_unwinds (objfile, &ui->table[index], unwind_sec,
+		       unwind_entries, unwind_size, text_offset);
+  index += unwind_entries;
+  internalize_unwinds (objfile, &ui->table[index], elf_unwind_sec,
+		       elf_unwind_entries, elf_unwind_size, text_offset);
+  index += elf_unwind_entries;
+
+  /* Now internalize the stub unwind entries.  */
+  if (stub_unwind_size > 0)
+    {
+      unsigned int i;
+      char *buf = alloca (stub_unwind_size);
+
+      /* Read in the stub unwind entries.  */
+      bfd_get_section_contents (objfile->obfd, stub_unwind_sec, buf,
+				0, stub_unwind_size);
+
+      /* Now convert them into regular unwind entries.  */
+      for (i = 0; i < stub_entries; i++, index++)
+	{
+	  /* Clear out the next unwind entry.  */
+	  memset (&ui->table[index], 0, sizeof (struct unwind_table_entry));
+
+	  /* Convert offset & size into region_start and region_end.  
+	     Stuff away the stub type into "reserved" fields.  */
+	  ui->table[index].region_start = bfd_get_32 (objfile->obfd,
+						      (bfd_byte *) buf);
+	  ui->table[index].region_start += text_offset;
+	  buf += 4;
+	  ui->table[index].stub_unwind.stub_type = bfd_get_8 (objfile->obfd,
+                                                              (bfd_byte *) buf);
+	  buf += 2;
+	  ui->table[index].region_end
+	    = ui->table[index].region_start + 4 * 
+	      (bfd_get_16 (objfile->obfd, (bfd_byte *) buf) - 1);
+	  buf += 2;
+	}
+
+    }
+
+  /* Unwind table needs to be kept sorted.  */
+  qsort (ui->table, total_entries, sizeof (struct unwind_table_entry),
+	 compare_unwind_entries);
+
+  /* Keep a pointer to the unwind information.  */
+  if(objfile->obj_private == NULL)
+    {
+      obj_private = (obj_private_data_t *)
+	obstack_alloc(&objfile->psymbol_obstack,
+		      sizeof(obj_private_data_t));
+      obj_private->unwind_info = NULL;
+      obj_private->so_info     = NULL;
+      
+      objfile->obj_private = (PTR) obj_private;
+    }
+  obj_private = (obj_private_data_t *)objfile->obj_private; 
+  obj_private->unwind_info = ui;
+}
+
+/* Lookup the unwind (stack backtrace) info for the given PC.  We search all
+   of the objfiles seeking the unwind table entry for this PC.  Each objfile
+   contains a sorted list of struct unwind_table_entry.  Since we do a binary
+   search of the unwind tables, we depend upon them to be sorted.  */
+
+struct unwind_table_entry *
+find_unwind_entry(pc)
+     CORE_ADDR pc;
+{
+  int first, middle, last;
+  struct objfile *objfile;
+
+  /* A function at address 0?  Not in HP-UX! */
+  if (pc == (CORE_ADDR) 0)
+    return NULL;
+
+  ALL_OBJFILES (objfile)
+    {
+      struct obj_unwind_info *ui;
+      ui = NULL;
+      if (objfile->obj_private)
+	ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info;
+
+      if (!ui)
+	{
+	  read_unwind_info (objfile);
+	  if (objfile->obj_private == NULL)
+	    error ("Internal error reading unwind information."); /* purecov: deadcode */
+	  ui = ((obj_private_data_t *)(objfile->obj_private))->unwind_info;
+	}
+
+      /* First, check the cache */
+
+      if (ui->cache
+	  && pc >= ui->cache->region_start
+	  && pc <= ui->cache->region_end)
+	return ui->cache;
+
+      /* Not in the cache, do a binary search */
+
+      first = 0;
+      last = ui->last;
+
+      while (first <= last)
+	{
+	  middle = (first + last) / 2;
+	  if (pc >= ui->table[middle].region_start
+	      && pc <= ui->table[middle].region_end)
+	    {
+	      ui->cache = &ui->table[middle];
+	      return &ui->table[middle];
+	    }
+
+	  if (pc < ui->table[middle].region_start)
+	    last = middle - 1;
+	  else
+	    first = middle + 1;
+	}
+    }				/* ALL_OBJFILES() */
+  return NULL;
+}
+
+/* Return the adjustment necessary to make for addresses on the stack
+   as presented by hpread.c.
+
+   This is necessary because of the stack direction on the PA and the
+   bizarre way in which someone (?) decided they wanted to handle
+   frame pointerless code in GDB.  */
+int
+hpread_adjust_stack_address (func_addr)
+     CORE_ADDR func_addr;
+{
+  struct unwind_table_entry *u;
+
+  u = find_unwind_entry (func_addr);
+  if (!u)
+    return 0;
+  else
+    return u->Total_frame_size << 3;
+}
+
+/* Called to determine if PC is in an interrupt handler of some
+   kind.  */
+
+static int
+pc_in_interrupt_handler (pc)
+     CORE_ADDR pc;
+{
+  struct unwind_table_entry *u;
+  struct minimal_symbol *msym_us;
+
+  u = find_unwind_entry (pc);
+  if (!u)
+    return 0;
+
+  /* Oh joys.  HPUX sets the interrupt bit for _sigreturn even though
+     its frame isn't a pure interrupt frame.  Deal with this.  */
+  msym_us = lookup_minimal_symbol_by_pc (pc);
+
+  return u->HP_UX_interrupt_marker && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us));
+}
+
+/* Called when no unwind descriptor was found for PC.  Returns 1 if it
+   appears that PC is in a linker stub.  */
+
+static int
+pc_in_linker_stub (pc)
+     CORE_ADDR pc;
+{
+  int found_magic_instruction = 0;
+  int i;
+  char buf[4];
+
+  /* If unable to read memory, assume pc is not in a linker stub.  */
+  if (target_read_memory (pc, buf, 4) != 0)
+    return 0;
+
+  /* We are looking for something like
+
+     ; $$dyncall jams RP into this special spot in the frame (RP')
+     ; before calling the "call stub"
+     ldw     -18(sp),rp
+
+     ldsid   (rp),r1         ; Get space associated with RP into r1
+     mtsp    r1,sp           ; Move it into space register 0
+     be,n    0(sr0),rp)      ; back to your regularly scheduled program */
+
+  /* Maximum known linker stub size is 4 instructions.  Search forward
+     from the given PC, then backward.  */
+  for (i = 0; i < 4; i++)
+    {
+      /* If we hit something with an unwind, stop searching this direction.  */
+
+      if (find_unwind_entry (pc + i * 4) != 0)
+	break;
+
+      /* Check for ldsid (rp),r1 which is the magic instruction for a 
+	 return from a cross-space function call.  */
+      if (read_memory_integer (pc + i * 4, 4) == 0x004010a1)
+	{
+	  found_magic_instruction = 1;
+	  break;
+	}
+      /* Add code to handle long call/branch and argument relocation stubs
+	 here.  */
+    }
+
+  if (found_magic_instruction != 0)
+    return 1;
+
+  /* Now look backward.  */
+  for (i = 0; i < 4; i++)
+    {
+      /* If we hit something with an unwind, stop searching this direction.  */
+
+      if (find_unwind_entry (pc - i * 4) != 0)
+	break;
+
+      /* Check for ldsid (rp),r1 which is the magic instruction for a 
+	 return from a cross-space function call.  */
+      if (read_memory_integer (pc - i * 4, 4) == 0x004010a1)
+	{
+	  found_magic_instruction = 1;
+	  break;
+	}
+      /* Add code to handle long call/branch and argument relocation stubs
+	 here.  */
+    }
+  return found_magic_instruction;
+}
+
+static int
+find_return_regnum(pc)
+     CORE_ADDR pc;
+{
+  struct unwind_table_entry *u;
+
+  u = find_unwind_entry (pc);
+
+  if (!u)
+    return RP_REGNUM;
+
+  if (u->Millicode)
+    return 31;
+
+  return RP_REGNUM;
+}
+
+/* Return size of frame, or -1 if we should use a frame pointer.  */
+static int
+find_proc_framesize (pc)
+     CORE_ADDR pc;
+{
+  struct unwind_table_entry *u;
+  struct minimal_symbol *msym_us;
+
+  /* This may indicate a bug in our callers... */
+  if (pc == (CORE_ADDR)0)
+    return -1;
+  
+  u = find_unwind_entry (pc);
+
+  if (!u)
+    {
+      if (pc_in_linker_stub (pc))
+	/* Linker stubs have a zero size frame.  */
+	return 0;
+      else
+	return -1;
+    }
+
+  msym_us = lookup_minimal_symbol_by_pc (pc);
+
+  /* If Save_SP is set, and we're not in an interrupt or signal caller,
+     then we have a frame pointer.  Use it.  */
+  if (u->Save_SP && !pc_in_interrupt_handler (pc)
+      && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us)))
+    return -1;
+
+  return u->Total_frame_size << 3;
+}
+
+/* Return offset from sp at which rp is saved, or 0 if not saved.  */
+static int rp_saved PARAMS ((CORE_ADDR));
+
+static int
+rp_saved (pc)
+     CORE_ADDR pc;
+{
+  struct unwind_table_entry *u;
+
+  /* A function at, and thus a return PC from, address 0?  Not in HP-UX! */
+  if (pc == (CORE_ADDR) 0)
+    return 0;
+
+  u = find_unwind_entry (pc);
+
+  if (!u)
+    {
+      if (pc_in_linker_stub (pc))
+	/* This is the so-called RP'.  */
+	return -24;
+      else
+	return 0;
+    }
+
+  if (u->Save_RP)
+    return -20;
+  else if (u->stub_unwind.stub_type != 0)
+    {
+      switch (u->stub_unwind.stub_type)
+	{
+	case EXPORT:
+	case IMPORT:
+	  return -24;
+	case PARAMETER_RELOCATION:
+	  return -8;
+	default:
+	  return 0;
+	}
+    }
+  else
+    return 0;
+}
+
+int
+frameless_function_invocation (frame)
+     struct frame_info *frame;
+{
+  struct unwind_table_entry *u;
+
+  u = find_unwind_entry (frame->pc);
+
+  if (u == 0)
+    return 0;
+
+  return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0);
+}
+
+CORE_ADDR
+saved_pc_after_call (frame)
+     struct frame_info *frame;
+{
+  int ret_regnum;
+  CORE_ADDR pc;
+  struct unwind_table_entry *u;
+
+  ret_regnum = find_return_regnum (get_frame_pc (frame));
+  pc = read_register (ret_regnum) & ~0x3;
+  
+  /* If PC is in a linker stub, then we need to dig the address
+     the stub will return to out of the stack.  */
+  u = find_unwind_entry (pc);
+  if (u && u->stub_unwind.stub_type != 0)
+    return FRAME_SAVED_PC (frame);
+  else
+    return pc;
+}
+
+CORE_ADDR
+hppa_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR pc = get_frame_pc (frame);
+  struct unwind_table_entry *u;
+  CORE_ADDR old_pc;
+  int  spun_around_loop = 0;
+  int  rp_offset = 0;
+
+  /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
+     at the base of the frame in an interrupt handler.  Registers within
+     are saved in the exact same order as GDB numbers registers.  How
+     convienent.  */
+  if (pc_in_interrupt_handler (pc))
+    return read_memory_integer (frame->frame + PC_REGNUM * 4, 4) & ~0x3;
+
+#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
+  /* Deal with signal handler caller frames too.  */
+  if (frame->signal_handler_caller)
+    {
+      CORE_ADDR rp;
+      FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp);
+      return rp & ~0x3;
+    }
+#endif
+
+  if (frameless_function_invocation (frame))
+    {
+      int ret_regnum;
+
+      ret_regnum = find_return_regnum (pc);
+
+      /* If the next frame is an interrupt frame or a signal
+	 handler caller, then we need to look in the saved
+	 register area to get the return pointer (the values
+	 in the registers may not correspond to anything useful).  */
+      if (frame->next 
+	  && (frame->next->signal_handler_caller
+	      || pc_in_interrupt_handler (frame->next->pc)))
+	{
+	  struct frame_saved_regs saved_regs;
+
+	  get_frame_saved_regs (frame->next, &saved_regs);
+	  if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+	    {
+	      pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+
+	      /* Syscalls are really two frames.  The syscall stub itself
+		 with a return pointer in %rp and the kernel call with
+		 a return pointer in %r31.  We return the %rp variant
+		 if %r31 is the same as frame->pc.  */
+	      if (pc == frame->pc)
+		pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+	    }
+	  else
+	    pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+	}
+      else
+	pc = read_register (ret_regnum) & ~0x3;
+    }
+  else
+    {
+      spun_around_loop = 0;
+      old_pc           = pc;
+
+restart:
+      rp_offset = rp_saved (pc);
+
+      /* Similar to code in frameless function case.  If the next
+	 frame is a signal or interrupt handler, then dig the right
+	 information out of the saved register info.  */
+      if (rp_offset == 0
+	  && frame->next
+	  && (frame->next->signal_handler_caller
+	      || pc_in_interrupt_handler (frame->next->pc)))
+	{
+	  struct frame_saved_regs saved_regs;
+
+	  get_frame_saved_regs (frame->next, &saved_regs);
+	  if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4) & 0x2)
+	    {
+	      pc = read_memory_integer (saved_regs.regs[31], 4) & ~0x3;
+
+	      /* Syscalls are really two frames.  The syscall stub itself
+		 with a return pointer in %rp and the kernel call with
+		 a return pointer in %r31.  We return the %rp variant
+		 if %r31 is the same as frame->pc.  */
+	      if (pc == frame->pc)
+		pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+	    }
+	  else
+	    pc = read_memory_integer (saved_regs.regs[RP_REGNUM], 4) & ~0x3;
+	}
+      else if (rp_offset == 0)
+        {
+          old_pc = pc;
+          pc = read_register (RP_REGNUM) & ~0x3;
+        }
+      else
+        {
+          old_pc = pc;
+          pc = read_memory_integer (frame->frame + rp_offset, 4) & ~0x3;
+        }
+    }
+
+  /* If PC is inside a linker stub, then dig out the address the stub
+     will return to. 
+
+     Don't do this for long branch stubs.  Why?  For some unknown reason
+     _start is marked as a long branch stub in hpux10.  */
+  u = find_unwind_entry (pc);
+  if (u && u->stub_unwind.stub_type != 0
+      && u->stub_unwind.stub_type != LONG_BRANCH)
+    {
+      unsigned int insn;
+
+      /* If this is a dynamic executable, and we're in a signal handler,
+	 then the call chain will eventually point us into the stub for
+	 _sigreturn.  Unlike most cases, we'll be pointed to the branch
+	 to the real sigreturn rather than the code after the real branch!. 
+
+	 Else, try to dig the address the stub will return to in the normal
+	 fashion.  */
+      insn = read_memory_integer (pc, 4);
+      if ((insn & 0xfc00e000) == 0xe8000000)
+	return (pc + extract_17 (insn) + 8) & ~0x3;
+      else
+	{
+        if (old_pc == pc)
+            spun_around_loop++;
+        
+        if (spun_around_loop > 1) 
+	  {
+           /* We're just about to go around the loop again with
+              no more hope of success.  Die. */
+           error("Unable to find return pc for this frame");
+	  }
+        else
+	  goto restart;
+	}
+    }
+
+  return pc;
+}
+
+/* We need to correct the PC and the FP for the outermost frame when we are
+   in a system call.  */
+
+void
+init_extra_frame_info (fromleaf, frame)
+     int fromleaf;
+     struct frame_info *frame;
+{
+  int flags;
+  int framesize;
+
+  if (frame->next && !fromleaf)
+    return;
+
+  /* If the next frame represents a frameless function invocation
+     then we have to do some adjustments that are normally done by
+     FRAME_CHAIN.  (FRAME_CHAIN is not called in this case.)  */
+  if (fromleaf)
+    {
+      /* Find the framesize of *this* frame without peeking at the PC
+	 in the current frame structure (it isn't set yet).  */
+      framesize = find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame)));
+
+      /* Now adjust our base frame accordingly.  If we have a frame pointer
+	 use it, else subtract the size of this frame from the current
+	 frame.  (we always want frame->frame to point at the lowest address
+	 in the frame).  */
+      if (framesize == -1)
+	frame->frame = TARGET_READ_FP ();
+      else
+	frame->frame -= framesize;
+      return;
+    }
+
+  flags = read_register (FLAGS_REGNUM);
+  if (flags & 2)	/* In system call? */
+    frame->pc = read_register (31) & ~0x3;
+
+  /* The outermost frame is always derived from PC-framesize
+
+     One might think frameless innermost frames should have
+     a frame->frame that is the same as the parent's frame->frame.
+     That is wrong; frame->frame in that case should be the *high*
+     address of the parent's frame.  It's complicated as hell to
+     explain, but the parent *always* creates some stack space for
+     the child.  So the child actually does have a frame of some
+     sorts, and its base is the high address in its parent's frame.  */
+  framesize = find_proc_framesize(frame->pc);
+  if (framesize == -1)
+    frame->frame = TARGET_READ_FP ();
+  else
+    frame->frame = read_register (SP_REGNUM) - framesize;
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+   This may involve searching through prologues for several functions
+   at boundaries where GCC calls HP C code, or where code which has
+   a frame pointer calls code without a frame pointer.  */
+
+CORE_ADDR
+frame_chain (frame)
+     struct frame_info *frame;
+{
+  int my_framesize, caller_framesize;
+  struct unwind_table_entry *u;
+  CORE_ADDR frame_base;
+  struct frame_info *tmp_frame;
+
+  CORE_ADDR  caller_pc;
+
+  struct minimal_symbol *min_frame_symbol;
+  struct symbol         *frame_symbol;
+  char                  *frame_symbol_name;
+
+  /* If this is a threaded application, and we see the
+     routine "__pthread_exit", treat it as the stack root
+     for this thread. */
+  min_frame_symbol  = lookup_minimal_symbol_by_pc (frame->pc);
+  frame_symbol      = find_pc_function(frame->pc);
+
+  if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */)
+    {
+    /* The test above for "no user function name" would defend
+       against the slim likelihood that a user might define a
+       routine named "__pthread_exit" and then try to debug it.
+
+       If it weren't commented out, and you tried to debug the
+       pthread library itself, you'd get errors.
+      
+       So for today, we don't make that check. */
+    frame_symbol_name = SYMBOL_NAME(min_frame_symbol);
+    if (frame_symbol_name != 0) {
+      if (0 == strncmp(frame_symbol_name,
+		       THREAD_INITIAL_FRAME_SYMBOL,
+		       THREAD_INITIAL_FRAME_SYM_LEN)) {
+         /* Pretend we've reached the bottom of the stack. */
+         return (CORE_ADDR) 0;
+         }
+       }  
+    }  /* End of hacky code for threads. */
+    
+  /* Handle HPUX, BSD, and OSF1 style interrupt frames first.  These
+     are easy; at *sp we have a full save state strucutre which we can
+     pull the old stack pointer from.  Also see frame_saved_pc for
+     code to dig a saved PC out of the save state structure.  */
+  if (pc_in_interrupt_handler (frame->pc))
+    frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, 4);
+#ifdef FRAME_BASE_BEFORE_SIGTRAMP
+  else if (frame->signal_handler_caller)
+    {
+      FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base);
+    }
+#endif
+  else
+    frame_base = frame->frame;
+
+  /* Get frame sizes for the current frame and the frame of the 
+     caller.  */
+  my_framesize = find_proc_framesize (frame->pc);
+  caller_pc = FRAME_SAVED_PC(frame);
+
+  /* If we can't determine the caller's PC, then it's not likely we can
+     really determine anything meaningful about its frame.  We'll consider
+     this to be stack bottom. */
+  if (caller_pc == (CORE_ADDR) 0)
+    return (CORE_ADDR) 0;
+
+  caller_framesize = find_proc_framesize (FRAME_SAVED_PC(frame));
+
+  /* If caller does not have a frame pointer, then its frame
+     can be found at current_frame - caller_framesize.  */
+  if (caller_framesize != -1)
+    {
+      return frame_base - caller_framesize;
+    }
+  /* Both caller and callee have frame pointers and are GCC compiled
+     (SAVE_SP bit in unwind descriptor is on for both functions.
+     The previous frame pointer is found at the top of the current frame.  */
+  if (caller_framesize == -1 && my_framesize == -1)
+    {
+      return read_memory_integer (frame_base, 4);
+    }
+  /* Caller has a frame pointer, but callee does not.  This is a little
+     more difficult as GCC and HP C lay out locals and callee register save
+     areas very differently.
+
+     The previous frame pointer could be in a register, or in one of 
+     several areas on the stack.
+
+     Walk from the current frame to the innermost frame examining 
+     unwind descriptors to determine if %r3 ever gets saved into the
+     stack.  If so return whatever value got saved into the stack.
+     If it was never saved in the stack, then the value in %r3 is still
+     valid, so use it. 
+
+     We use information from unwind descriptors to determine if %r3
+     is saved into the stack (Entry_GR field has this information).  */
+
+  tmp_frame = frame;
+  while (tmp_frame)
+    {
+      u = find_unwind_entry (tmp_frame->pc);
+
+      if (!u)
+	{
+	  /* We could find this information by examining prologues.  I don't
+	     think anyone has actually written any tools (not even "strip")
+	     which leave them out of an executable, so maybe this is a moot
+	     point.  */
+          /* ??rehrauer: Actually, it's quite possible to stepi your way into
+             code that doesn't have unwind entries.  For example, stepping into
+             the dynamic linker will give you a PC that has none.  Thus, I've
+             disabled this warning. */
+#if 0
+	  warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame->pc);
+#endif
+	  return (CORE_ADDR) 0;
+	}
+
+      /* Entry_GR specifies the number of callee-saved general registers
+	 saved in the stack.  It starts at %r3, so %r3 would be 1.  */
+      if (u->Entry_GR >= 1 || u->Save_SP
+	  || tmp_frame->signal_handler_caller
+	  || pc_in_interrupt_handler (tmp_frame->pc))
+	break;
+      else
+	tmp_frame = tmp_frame->next;
+    }
+
+  if (tmp_frame)
+    {
+      /* We may have walked down the chain into a function with a frame
+	 pointer.  */
+      if (u->Save_SP
+	  && !tmp_frame->signal_handler_caller
+	  && !pc_in_interrupt_handler (tmp_frame->pc))
+	{
+	  return read_memory_integer (tmp_frame->frame, 4);
+	}
+      /* %r3 was saved somewhere in the stack.  Dig it out.  */
+      else 
+	{
+	  struct frame_saved_regs saved_regs;
+
+	  /* Sick.
+
+	     For optimization purposes many kernels don't have the
+	     callee saved registers into the save_state structure upon
+	     entry into the kernel for a syscall; the optimization
+	     is usually turned off if the process is being traced so
+	     that the debugger can get full register state for the
+	     process.
+	      
+	     This scheme works well except for two cases:
+
+	       * Attaching to a process when the process is in the
+	       kernel performing a system call (debugger can't get
+	       full register state for the inferior process since
+	       the process wasn't being traced when it entered the
+	       system call).
+
+	       * Register state is not complete if the system call
+	       causes the process to core dump.
+
+
+	     The following heinous code is an attempt to deal with
+	     the lack of register state in a core dump.  It will
+	     fail miserably if the function which performs the
+	     system call has a variable sized stack frame.  */
+
+	  get_frame_saved_regs (tmp_frame, &saved_regs);
+
+	  /* Abominable hack.  */
+	  if (current_target.to_has_execution == 0
+	      && ((saved_regs.regs[FLAGS_REGNUM]
+	           && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4)
+		       & 0x2))
+		  || (saved_regs.regs[FLAGS_REGNUM] == 0
+		      && read_register (FLAGS_REGNUM) & 0x2)))
+	    {
+	      u = find_unwind_entry (FRAME_SAVED_PC (frame));
+	      if (!u)
+		{
+		  return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+		}
+	      else
+		{
+		  return frame_base - (u->Total_frame_size << 3);
+		}
+	    }
+	
+	  return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+	}
+    }
+  else
+    {
+      struct frame_saved_regs saved_regs;
+
+      /* Get the innermost frame.  */
+      tmp_frame = frame;
+      while (tmp_frame->next != NULL)
+	tmp_frame = tmp_frame->next;
+
+      get_frame_saved_regs (tmp_frame, &saved_regs);
+      /* Abominable hack.  See above.  */
+      if (current_target.to_has_execution == 0
+	  && ((saved_regs.regs[FLAGS_REGNUM]
+	       && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], 4)
+		   & 0x2))
+	      || (saved_regs.regs[FLAGS_REGNUM] == 0
+		  && read_register (FLAGS_REGNUM)  & 0x2)))
+	{
+	  u = find_unwind_entry (FRAME_SAVED_PC (frame));
+	  if (!u)
+	    {
+	      return read_memory_integer (saved_regs.regs[FP_REGNUM], 4);
+	    }
+	   else
+	     {
+	       return frame_base - (u->Total_frame_size << 3);
+	     }
+	}
+	
+      /* The value in %r3 was never saved into the stack (thus %r3 still
+	 holds the value of the previous frame pointer).  */
+      return TARGET_READ_FP ();
+    }
+}
+
+
+/* To see if a frame chain is valid, see if the caller looks like it
+   was compiled with gcc. */
+
+int
+hppa_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;
+{
+  struct minimal_symbol *msym_us;
+  struct minimal_symbol *msym_start;
+  struct unwind_table_entry *u, *next_u = NULL;
+  struct frame_info *next;
+
+  if (!chain)
+    return 0;
+
+  u = find_unwind_entry (thisframe->pc);
+
+  if (u == NULL)
+    return 1;
+
+  /* We can't just check that the same of msym_us is "_start", because
+     someone idiotically decided that they were going to make a Ltext_end
+     symbol with the same address.  This Ltext_end symbol is totally
+     indistinguishable (as nearly as I can tell) from the symbol for a function
+     which is (legitimately, since it is in the user's namespace)
+     named Ltext_end, so we can't just ignore it.  */
+  msym_us = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe));
+  msym_start = lookup_minimal_symbol ("_start", NULL, NULL);
+  if (msym_us
+      && msym_start
+      && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
+    return 0;
+
+  /* Grrrr.  Some new idiot decided that they don't want _start for the
+     PRO configurations; $START$ calls main directly....  Deal with it.  */
+  msym_start = lookup_minimal_symbol ("$START$", NULL, NULL);
+  if (msym_us
+      && msym_start
+      && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
+    return 0;
+
+  next = get_next_frame (thisframe);
+  if (next)
+    next_u = find_unwind_entry (next->pc);
+
+  /* If this frame does not save SP, has no stack, isn't a stub,
+     and doesn't "call" an interrupt routine or signal handler caller,
+     then its not valid.  */
+  if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0
+      || (thisframe->next && thisframe->next->signal_handler_caller)
+      || (next_u && next_u->HP_UX_interrupt_marker))
+    return 1;
+
+  if (pc_in_linker_stub (thisframe->pc))
+    return 1;
+
+  return 0;
+}
+
+/*
+   These functions deal with saving and restoring register state
+   around a function call in the inferior. They keep the stack
+   double-word aligned; eventually, on an hp700, the stack will have
+   to be aligned to a 64-byte boundary. */
+
+void
+push_dummy_frame (inf_status)
+     struct inferior_status *inf_status;
+{
+  CORE_ADDR sp, pc, pcspace;
+  register int regnum;
+  int int_buffer;
+  double freg_buffer;
+
+  /* Oh, what a hack.  If we're trying to perform an inferior call
+     while the inferior is asleep, we have to make sure to clear
+     the "in system call" bit in the flag register (the call will
+     start after the syscall returns, so we're no longer in the system
+     call!)  This state is kept in "inf_status", change it there.
+
+     We also need a number of horrid hacks to deal with lossage in the
+     PC queue registers (apparently they're not valid when the in syscall
+     bit is set).  */
+  pc = target_read_pc (inferior_pid);
+  int_buffer = read_register (FLAGS_REGNUM);
+  if (int_buffer & 0x2)
+    {
+      unsigned int sid;
+      int_buffer &= ~0x2;
+      memcpy (inf_status->registers, &int_buffer, 4);
+      memcpy (inf_status->registers + REGISTER_BYTE (PCOQ_HEAD_REGNUM), &pc, 4);
+      pc += 4;
+      memcpy (inf_status->registers + REGISTER_BYTE (PCOQ_TAIL_REGNUM), &pc, 4);
+      pc -= 4;
+      sid = (pc >> 30) & 0x3;
+      if (sid == 0)
+	pcspace = read_register (SR4_REGNUM);
+      else
+	pcspace = read_register (SR4_REGNUM + 4 + sid);
+      memcpy (inf_status->registers + REGISTER_BYTE (PCSQ_HEAD_REGNUM),
+	      &pcspace, 4);
+      memcpy (inf_status->registers + REGISTER_BYTE (PCSQ_TAIL_REGNUM),
+	      &pcspace, 4);
+    }
+  else
+    pcspace = read_register (PCSQ_HEAD_REGNUM);
+
+  /* Space for "arguments"; the RP goes in here. */
+  sp = read_register (SP_REGNUM) + 48;
+  int_buffer = read_register (RP_REGNUM) | 0x3;
+  write_memory (sp - 20, (char *)&int_buffer, 4);
+
+  int_buffer = TARGET_READ_FP ();
+  write_memory (sp, (char *)&int_buffer, 4);
+
+  write_register (FP_REGNUM, sp);
+
+  sp += 8;
+
+  for (regnum = 1; regnum < 32; regnum++)
+    if (regnum != RP_REGNUM && regnum != FP_REGNUM)
+      sp = push_word (sp, read_register (regnum));
+
+  sp += 4;
+
+  for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++)
+    {
+      read_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8);
+      sp = push_bytes (sp, (char *)&freg_buffer, 8);
+    }
+  sp = push_word (sp, read_register (IPSW_REGNUM));
+  sp = push_word (sp, read_register (SAR_REGNUM));
+  sp = push_word (sp, pc);
+  sp = push_word (sp, pcspace);
+  sp = push_word (sp, pc + 4);
+  sp = push_word (sp, pcspace);
+  write_register (SP_REGNUM, sp);
+}
+
+static void
+find_dummy_frame_regs (frame, frame_saved_regs)
+     struct frame_info *frame;
+     struct frame_saved_regs *frame_saved_regs;
+{
+  CORE_ADDR fp = frame->frame;
+  int i;
+
+  frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3;
+  frame_saved_regs->regs[FP_REGNUM] = fp;
+  frame_saved_regs->regs[1] = fp + 8;
+
+  for (fp += 12, i = 3; i < 32; i++)
+    {
+      if (i != FP_REGNUM)
+	{
+	  frame_saved_regs->regs[i] = fp;
+	  fp += 4;
+	}
+    }
+
+  fp += 4;
+  for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
+    frame_saved_regs->regs[i] = fp;
+
+  frame_saved_regs->regs[IPSW_REGNUM] = fp;
+  frame_saved_regs->regs[SAR_REGNUM] = fp + 4;
+  frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 8;
+  frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 12;
+  frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 16;
+  frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 20;
+}
+
+void
+hppa_pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR fp, npc, target_pc;
+  register int regnum;
+  struct frame_saved_regs fsr;
+  double freg_buffer;
+
+  fp = FRAME_FP (frame);
+  get_frame_saved_regs (frame, &fsr);
+
+#ifndef NO_PC_SPACE_QUEUE_RESTORE
+  if (fsr.regs[IPSW_REGNUM])    /* Restoring a call dummy frame */
+    restore_pc_queue (&fsr);
+#endif
+
+  for (regnum = 31; regnum > 0; regnum--)
+    if (fsr.regs[regnum])
+      write_register (regnum, read_memory_integer (fsr.regs[regnum], 4));
+
+  for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM ; regnum--)
+    if (fsr.regs[regnum])
+      {
+	read_memory (fsr.regs[regnum], (char *)&freg_buffer, 8);
+        write_register_bytes (REGISTER_BYTE (regnum), (char *)&freg_buffer, 8);
+      }
+
+  if (fsr.regs[IPSW_REGNUM])
+    write_register (IPSW_REGNUM,
+                    read_memory_integer (fsr.regs[IPSW_REGNUM], 4));
+
+  if (fsr.regs[SAR_REGNUM])
+    write_register (SAR_REGNUM,
+                    read_memory_integer (fsr.regs[SAR_REGNUM], 4));
+
+  /* If the PC was explicitly saved, then just restore it.  */
+  if (fsr.regs[PCOQ_TAIL_REGNUM])
+    {
+      npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], 4);
+      write_register (PCOQ_TAIL_REGNUM, npc);
+    }
+  /* Else use the value in %rp to set the new PC.  */
+  else 
+    {
+      npc = read_register (RP_REGNUM);
+      write_pc (npc);
+    }
+
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));
+
+  if (fsr.regs[IPSW_REGNUM])    /* call dummy */
+    write_register (SP_REGNUM, fp - 48);
+  else
+    write_register (SP_REGNUM, fp);
+
+  /* The PC we just restored may be inside a return trampoline.  If so
+     we want to restart the inferior and run it through the trampoline.
+
+     Do this by setting a momentary breakpoint at the location the
+     trampoline returns to. 
+
+     Don't skip through the trampoline if we're popping a dummy frame.  */
+  target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3;
+  if (target_pc && !fsr.regs[IPSW_REGNUM])
+    {
+      struct symtab_and_line sal;
+      struct breakpoint *breakpoint;
+      struct cleanup *old_chain;
+
+      /* Set up our breakpoint.   Set it to be silent as the MI code
+	 for "return_command" will print the frame we returned to.  */
+      sal = find_pc_line (target_pc, 0);
+      sal.pc = target_pc;
+      breakpoint = set_momentary_breakpoint (sal, NULL, bp_finish);
+      breakpoint->silent = 1;
+
+      /* So we can clean things up.  */
+      old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+
+      /* Start up the inferior.  */
+      clear_proceed_status ();
+      proceed_to_finish = 1;
+      proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+
+      /* Perform our cleanups.  */
+      do_cleanups (old_chain);
+    }
+  flush_cached_frames ();
+}
+
+/* After returning to a dummy on the stack, restore the instruction
+   queue space registers. */
+
+static int
+restore_pc_queue (fsr)
+     struct frame_saved_regs *fsr;
+{
+  CORE_ADDR pc = read_pc ();
+  CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], 4);
+  struct target_waitstatus w;
+  int insn_count;
+
+  /* Advance past break instruction in the call dummy. */
+  write_register (PCOQ_HEAD_REGNUM, pc + 4);
+  write_register (PCOQ_TAIL_REGNUM, pc + 8);
+
+  /* HPUX doesn't let us set the space registers or the space
+     registers of the PC queue through ptrace. Boo, hiss.
+     Conveniently, the call dummy has this sequence of instructions
+     after the break:
+        mtsp r21, sr0
+        ble,n 0(sr0, r22)
+    
+     So, load up the registers and single step until we are in the
+     right place. */
+
+  write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], 4));
+  write_register (22, new_pc);
+
+  for (insn_count = 0; insn_count < 3; insn_count++)
+    {
+      /* FIXME: What if the inferior gets a signal right now?  Want to
+	 merge this into wait_for_inferior (as a special kind of
+	 watchpoint?  By setting a breakpoint at the end?  Is there
+	 any other choice?  Is there *any* way to do this stuff with
+	 ptrace() or some equivalent?).  */
+      resume (1, 0);
+      target_wait (inferior_pid, &w);
+
+      if (w.kind == TARGET_WAITKIND_SIGNALLED)
+        {
+          stop_signal = w.value.sig;
+          terminal_ours_for_output ();
+          printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
+			     target_signal_to_name (stop_signal),
+			     target_signal_to_string (stop_signal));
+          gdb_flush (gdb_stdout);
+          return 0;
+        }
+    }
+  target_terminal_ours ();
+  target_fetch_registers (-1);
+  return 1;
+}
+
+#if 0
+CORE_ADDR
+hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  /* array of arguments' offsets */
+  int *offset = (int *)alloca(nargs * sizeof (int));
+  int cum = 0;
+  int i, alignment;
+  
+  for (i = 0; i < nargs; i++)
+    {
+      int x = 0;
+      /* cum is the sum of the lengths in bytes of
+	 the arguments seen so far */
+      cum += TYPE_LENGTH (VALUE_TYPE (args[i]));
+
+    /* value must go at proper alignment. Assume alignment is a
+	 power of two. */
+      alignment = hppa_alignof (VALUE_TYPE (args[i]));
+
+      if (cum % alignment)
+	cum = (cum + alignment) & -alignment;
+      offset[i] = -cum;
+
+    }
+  sp += max ((cum + 7) & -8, 16);
+
+  for (i = 0; i < nargs; i++)
+    write_memory (sp + offset[i], VALUE_CONTENTS (args[i]),
+		  TYPE_LENGTH (VALUE_TYPE (args[i])));
+
+  if (struct_return)
+    write_register (28, struct_addr);
+  return sp + 32;
+}
+#endif
+
+/* elz: I am rewriting this function, because the one above is a very 
+   obscure piece of code.
+   This function pushes the arguments on the stack. The stack grows up
+   on the PA. 
+   Each argument goes in one (or more) word (4 bytes) on the stack.
+   The first four words for the args must be allocated, even if they 
+   are not used. 
+   The 'topmost' arg is arg0, the 'bottom-most' is arg3. (if you think of 
+   them as 1 word long).
+   Below these there can be any number of arguments, as needed by the function.
+   If an arg is bigger than one word, it will be written on the stack 
+   occupying as many words as needed. Args that are bigger than 64bits
+   are not copied on the stack, a pointer is passed instead.
+
+   On top of the arg0 word there are other 8 words (32bytes) which are used
+   for other purposes */
+
+CORE_ADDR
+hppa_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  /* array of arguments' offsets */
+  int *offset = (int *)alloca(nargs * sizeof (int));
+  /* array of arguments' lengths: real lengths in bytes, not aligned to word size */
+  int *lengths = (int *)alloca(nargs * sizeof (int));
+
+  int bytes_reserved; /* this is the number of bytes on the stack occupied by an
+                         argument. This will be always a multiple of 4 */
+
+  int cum_bytes_reserved = 0; /* this is the total number of bytes reserved by the args
+                                 seen so far. It is a multiple of 4 always */
+  int cum_bytes_aligned = 0; /* same as above, but aligned on 8 bytes */
+  int i; 
+
+  /* When an arg does not occupy a whole word, for instance in bitfields:
+     if the arg is x bits (0<x<32), it must be written
+     starting from the (x-1)-th position  down until the 0-th position. 
+     It is enough to align it to the word. */ 
+  /* if an arg occupies 8 bytes, it must be aligned on the 64-bits 
+     high order word in odd arg word. */
+  /* if an arg is larger than 64 bits, we need to pass a pointer to it, and
+     copy the actual value on the stack, so that the callee can play with it.
+     This is taken care of in valops.c in the call_function_by_hand function.
+     The argument that is received in this function here has already be converted
+     to a pointer to whatever is needed, so that it just can be pushed
+     as a word argument */
+  
+  for (i = 0; i < nargs; i++)
+    {
+
+      lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
+
+      if (lengths[i] % 4)
+        bytes_reserved = (lengths[i] / 4) * 4 + 4;
+      else 
+        bytes_reserved = lengths[i];
+
+      offset[i] = cum_bytes_reserved + lengths[i];
+
+      if ((bytes_reserved == 8) && (offset[i] % 8)) /* if 64-bit arg is not 64 bit aligned */
+      {
+        int new_offset=0;
+        /* bytes_reserved is already aligned to the word, so we put it at one word
+           more down the stack. This will leave one empty word on the
+           stack, and one unused register. This is OK, see the calling
+           convention doc */
+        /* the offset may have to be moved to the corresponding position
+           one word down the stack, to maintain 
+           alignment. */
+        new_offset = (offset[i] / 8) * 8 + 8;
+        if ((new_offset - offset[i]) >=4) 
+        {
+         bytes_reserved += 4;
+         offset[i] += 4;
+        }
+      }
+
+      cum_bytes_reserved += bytes_reserved;
+
+    }
+
+  /* now move up the sp to reserve at least 4 words required for the args,
+     or more than this if needed */
+  /* wee also need to keep the sp aligned to 8 bytes */
+  cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved);
+  sp += max (cum_bytes_aligned, 16);
+
+  /* now write each of the args at the proper offset down the stack */
+  for (i = 0; i < nargs; i++)
+    write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+		  
+
+ /* if a structure has to be returned, set up register 28 to hold its address */
+  if (struct_return)
+    write_register (28, struct_addr);
+
+ /* the stack will have other 8 words on top of the args */
+  return sp + 32;
+}
+
+
+/* elz: this function returns a value which is built looking at the given address.
+   It is called from call_function_by_hand, in case we need to return a 
+   value which is larger than 64 bits, and it is stored in the stack rather than 
+   in the registers r28 and r29 or fr4.
+   This function does the same stuff as value_being_returned in values.c, but
+   gets the value from the stack rather than from the buffer where all the
+   registers were saved when the function called completed. */
+value_ptr
+hppa_value_returned_from_stack (valtype , addr)
+     register struct type *valtype;
+     CORE_ADDR addr;
+{
+  register value_ptr val;
+
+  val = allocate_value (valtype);
+  CHECK_TYPEDEF (valtype);
+  target_read_memory(addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (valtype));
+
+  return val;
+}
+
+
+
+/* elz: Used to lookup a symbol in the shared libraries.
+ This function calls shl_findsym, indirectly through a
+ call to __d_shl_get. __d_shl_get is in end.c, which is always
+ linked in by the hp compilers/linkers. 
+ The call to shl_findsym cannot be made directly because it needs
+ to be active in target address space. 
+ inputs: - minimal symbol pointer for the function we want to look up
+         - address in target space of the descriptor for the library
+           where we want to look the symbol up.
+           This address is retrieved using the 
+           som_solib_get_solib_by_pc function (somsolib.c). 
+ output: - real address in the library of the function.          
+ note: the handle can be null, in which case shl_findsym will look for
+       the symbol in all the loaded shared libraries.
+ files to look at if you need reference on this stuff:
+ dld.c, dld_shl_findsym.c
+ end.c
+ man entry for shl_findsym */        
+
+CORE_ADDR
+find_stub_with_shl_get(function, handle) 
+  struct minimal_symbol *function;
+  CORE_ADDR handle;
+{
+ struct symbol *get_sym, *symbol2;
+ struct minimal_symbol *buff_minsym, *msymbol;
+ struct type *ftype;
+ value_ptr *args;
+ value_ptr funcval, val;
+
+ int x, namelen, err_value, tmp = -1;
+ CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr;
+ CORE_ADDR stub_addr;
+
+
+    args           = (value_ptr *) alloca (sizeof (value_ptr) * 8);  /* 6 for the arguments and one null one??? */
+    funcval        = find_function_in_inferior("__d_shl_get");
+    get_sym        = lookup_symbol("__d_shl_get", NULL, VAR_NAMESPACE, NULL, NULL);
+    buff_minsym    = lookup_minimal_symbol("__buffer", NULL, NULL);
+    msymbol        = lookup_minimal_symbol ("__shldp", NULL, NULL);
+    symbol2 = lookup_symbol("__shldp", NULL, VAR_NAMESPACE, NULL, NULL);
+    endo_buff_addr = SYMBOL_VALUE_ADDRESS (buff_minsym);
+    namelen        = strlen(SYMBOL_NAME(function));
+    value_return_addr = endo_buff_addr + namelen;
+    ftype          = check_typedef(SYMBOL_TYPE(get_sym));
+
+    /* do alignment */
+    if ((x=value_return_addr % 64) !=0)
+       value_return_addr = value_return_addr + 64 - x;
+
+    errno_return_addr = value_return_addr + 64;
+
+    
+    /* set up stuff needed by __d_shl_get in buffer in end.o */
+
+    target_write_memory(endo_buff_addr, SYMBOL_NAME(function), namelen);
+    
+    target_write_memory(value_return_addr, (char *) &tmp, 4);
+    
+    target_write_memory(errno_return_addr, (char *) &tmp, 4);
+
+    target_write_memory(SYMBOL_VALUE_ADDRESS(msymbol), 
+                        (char *)&handle, 4);
+    
+    /* now prepare the arguments for the call */
+
+    args[0] = value_from_longest (TYPE_FIELD_TYPE(ftype, 0), 12);
+    args[1] = value_from_longest (TYPE_FIELD_TYPE(ftype, 1), SYMBOL_VALUE_ADDRESS(msymbol));
+    args[2] = value_from_longest (TYPE_FIELD_TYPE(ftype, 2), endo_buff_addr);
+    args[3] = value_from_longest (TYPE_FIELD_TYPE(ftype, 3), TYPE_PROCEDURE);
+    args[4] = value_from_longest (TYPE_FIELD_TYPE(ftype, 4), value_return_addr);
+    args[5] = value_from_longest (TYPE_FIELD_TYPE(ftype, 5), errno_return_addr);
+
+    /* now call the function */
+
+    val = call_function_by_hand(funcval, 6, args);
+
+    /* now get the results */
+
+    target_read_memory(errno_return_addr, (char *) &err_value, sizeof(err_value));
+
+    target_read_memory(value_return_addr, (char *) &stub_addr, sizeof(stub_addr));
+    if (stub_addr <= 0)
+        error("call to __d_shl_get failed, error code is %d", err_value); /* purecov: deadcode */
+    
+    return(stub_addr);
+}
+
+/* Cover routine for find_stub_with_shl_get to pass to catch_errors */ 
+static CORE_ADDR
+cover_find_stub_with_shl_get (args)
+  args_for_find_stub * args;
+{
+  return find_stub_with_shl_get (args->msym, args->solib_handle);
+}
+
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.
+
+   On the hppa we need to call the stack dummy through $$dyncall.
+   Therefore our version of FIX_CALL_DUMMY takes an extra argument,
+   real_pc, which is the location where gdb should start up the
+   inferior to do the function call. */
+
+CORE_ADDR
+hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
+     char *dummy;
+     CORE_ADDR pc;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  CORE_ADDR dyncall_addr;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *trampoline;
+  int flags = read_register (FLAGS_REGNUM);
+  struct unwind_table_entry *u;
+  CORE_ADDR new_stub=0;
+  CORE_ADDR solib_handle=0;
+
+  trampoline = NULL;
+  msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+  if (msymbol == NULL)
+    error ("Can't find an address for $$dyncall trampoline"); /* purecov: deadcode */
+
+  dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+  /* FUN could be a procedure label, in which case we have to get
+     its real address and the value of its GOT/DP.  */
+  if (fun & 0x2)
+    {
+      /* Get the GOT/DP value for the target function.  It's
+	 at *(fun+4).  Note the call dummy is *NOT* allowed to
+	 trash %r19 before calling the target function.  */
+      write_register (19, read_memory_integer ((fun & ~0x3) + 4, 4));
+
+      /* Now get the real address for the function we are calling, it's
+	 at *fun.  */
+      fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, 4);
+    }
+  else
+    {
+
+#ifndef GDB_TARGET_IS_PA_ELF
+      /* FUN could be either an export stub, or the real address of a
+	 function in a shared library.  We must call an import stub
+	 rather than the export stub or real function for lazy binding
+	 to work correctly.  */
+
+      /* elz: let's see if fun is in a shared library */
+      solib_handle = som_solib_get_solib_by_pc(fun);
+
+      /* elz: for 10.30 and 11.00 the calls via __d_plt_call cannot be made
+	 via import stubs, only via plables, so this code here becomes useless.
+	 On 10.20, the plables mechanism works too, so we just ignore this import 
+	 stub stuff */
+#if 0
+      if (solib_handle)
+	{
+	  struct objfile *objfile;
+	  struct minimal_symbol *funsymbol, *stub_symbol;
+	  CORE_ADDR newfun = 0;
+
+	  funsymbol = lookup_minimal_symbol_by_pc (fun);
+	  if (!funsymbol)
+	    error ("Unable to find minimal symbol for target fucntion.\n");
+
+	  /* Search all the object files for an import symbol with the
+	     right name. */
+	  ALL_OBJFILES (objfile)
+	    {
+	      stub_symbol = lookup_minimal_symbol (SYMBOL_NAME (funsymbol),
+						   NULL, objfile);
+	      /* Found a symbol with the right name.  */
+	      if (stub_symbol)
+		{
+		  struct unwind_table_entry *u;
+		  /* It must be a shared library trampoline.  */
+		  if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
+		    continue;
+
+		  /* It must also be an import stub.  */
+		  u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
+		  if (!u || u->stub_unwind.stub_type != IMPORT)
+		    continue;
+
+		  /* OK.  Looks like the correct import stub.  */
+		  newfun = SYMBOL_VALUE (stub_symbol);
+		  fun = newfun;
+		}
+	    }
+	  if (newfun == 0)
+	    write_register (19, som_solib_get_got_by_pc (fun));
+	}
+#endif /* end of if 0 */
+#endif
+    }
+
+  /* If we are calling an import stub (eg calling into a dynamic library)
+     then have sr4export call the magic __d_plt_call routine which is linked
+     in from end.o.  (You can't use _sr4export to call the import stub as
+     the value in sp-24 will get fried and you end up returning to the
+     wrong location.  You can't call the import stub directly as the code
+     to bind the PLT entry to a function can't return to a stack address.)  */
+
+  /* elz:
+     There does not have to be an import stub to call a routine in a
+     different load module (note: a "load module" is an a.out or a shared
+     library).  If you call a routine indirectly, going through $$dyncall (or
+     $$dyncall_external), you won't go through an import stub.  Import stubs
+     are only used for direct calls to an imported routine.
+
+     What you (wdb) need is to go through $$dyncall with a proper plabel for
+     the imported routine.  shl_findsym() returns you the address of a plabel
+     suitable for use in making an indirect call through, e.g., through
+     $$dyncall.
+     This is taken care below with the call to find_stub_.... */
+#if 0
+  /* elz: this check here is not necessary if we are going to call stuff through
+     plabels only, we just now check whether the function we call is in a shlib */
+  u = find_unwind_entry (fun);
+
+  if (u && u->stub_unwind.stub_type == IMPORT || 
+      (!(u && u->stub_unwind.stub_type == IMPORT) && solib_handle))
+#endif /* 0 */
+  if (solib_handle)
+    {
+      CORE_ADDR new_fun;
+
+      /* Prefer __gcc_plt_call over the HP supplied routine because
+	 __gcc_plt_call works for any number of arguments.  */
+      trampoline = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL);
+      if (trampoline == NULL)
+	trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
+
+      if (trampoline == NULL)
+	{
+	  error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g (links in /opt/langtools/lib/end.o)");
+	}
+      /* This is where sr4export will jump to.  */
+      new_fun = SYMBOL_VALUE_ADDRESS (trampoline);
+
+      if (strcmp (SYMBOL_NAME (trampoline), "__d_plt_call") == 0)
+	{
+          /* if the function is in a shared library, but we have no import sub for 
+             it, we need to get the plabel from a call to __d_shl_get, which is a 
+             function in end.o. To call this function we need to set up various things */
+	  
+	  /* actually now we just use the plabel any time we make the call,
+	     because on 10.30 and 11.00 this is the only acceptable way. This also
+	     works fine for 10.20 */
+	  /* if (!(u && u->stub_unwind.stub_type == IMPORT) && solib_handle) */
+            {
+              struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc(fun);
+              
+              new_stub = find_stub_with_shl_get(fmsymbol, solib_handle);
+
+              if (new_stub == NULL) 
+                error("Can't find an import stub for %s", SYMBOL_NAME(fmsymbol)); /* purecov: deadcode */
+            }
+
+	  /* We have to store the address of the stub in __shlib_funcptr.  */
+	    msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
+					     (struct objfile *)NULL);
+	    if (msymbol == NULL)
+	      error ("Can't find an address for __shlib_funcptr"); /* purecov: deadcode */
+
+         /* if (new_stub != NULL) */
+	     target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&new_stub, 4);
+         /* this is no longer used */
+         /* else
+	     target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), (char *)&fun, 4); */
+
+	  /* We want sr4export to call __d_plt_call, so we claim it is
+	     the final target.  Clear trampoline.  */
+	    fun = new_fun;
+	    trampoline = NULL;
+	}
+    }
+
+  /* Store upper 21 bits of function address into ldil.  fun will either be
+     the final target (most cases) or __d_plt_call when calling into a shared
+     library and __gcc_plt_call is not available.  */
+  store_unsigned_integer
+    (&dummy[FUNC_LDIL_OFFSET],
+     INSTRUCTION_SIZE,
+     deposit_21 (fun >> 11,
+		 extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET],
+					   INSTRUCTION_SIZE)));
+
+  /* Store lower 11 bits of function address into ldo */
+  store_unsigned_integer
+    (&dummy[FUNC_LDO_OFFSET],
+     INSTRUCTION_SIZE,
+     deposit_14 (fun & MASK_11,
+		 extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET],
+					   INSTRUCTION_SIZE)));
+#ifdef SR4EXPORT_LDIL_OFFSET
+
+  {
+    CORE_ADDR trampoline_addr;
+
+    /* We may still need sr4export's address too.  */
+
+    if (trampoline == NULL)
+      {
+	msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+	if (msymbol == NULL)
+	  error ("Can't find an address for _sr4export trampoline"); /* purecov: deadcode */
+
+	trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+      }
+    else
+      trampoline_addr = SYMBOL_VALUE_ADDRESS (trampoline);
+
+
+    /* Store upper 21 bits of trampoline's address into ldil */
+    store_unsigned_integer
+      (&dummy[SR4EXPORT_LDIL_OFFSET],
+       INSTRUCTION_SIZE,
+       deposit_21 (trampoline_addr >> 11,
+		   extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET],
+					     INSTRUCTION_SIZE)));
+
+    /* Store lower 11 bits of trampoline's address into ldo */
+    store_unsigned_integer
+      (&dummy[SR4EXPORT_LDO_OFFSET],
+       INSTRUCTION_SIZE,
+       deposit_14 (trampoline_addr & MASK_11,
+		   extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET],
+					     INSTRUCTION_SIZE)));
+  }
+#endif
+
+  write_register (22, pc);
+
+  /* If we are in a syscall, then we should call the stack dummy
+     directly.  $$dyncall is not needed as the kernel sets up the
+     space id registers properly based on the value in %r31.  In
+     fact calling $$dyncall will not work because the value in %r22
+     will be clobbered on the syscall exit path. 
+
+     Similarly if the current PC is in a shared library.  Note however,
+     this scheme won't work if the shared library isn't mapped into
+     the same space as the stack.  */
+  if (flags & 2)
+    return pc;
+#ifndef GDB_TARGET_IS_PA_ELF
+  else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid)))
+    return pc;
+#endif
+  else
+    return dyncall_addr;
+
+}
+
+
+
+
+/* If the pid is in a syscall, then the FP register is not readable.
+   We'll return zero in that case, rather than attempting to read it
+   and cause a warning. */
+CORE_ADDR
+target_read_fp (pid)
+  int  pid;
+{
+  int flags = read_register (FLAGS_REGNUM);
+
+  if (flags & 2) {
+    return (CORE_ADDR) 0;
+  }
+
+  /* This is the only site that may directly read_register () the FP
+     register.  All others must use TARGET_READ_FP (). */
+  return read_register (FP_REGNUM);
+}
+
+
+/* Get the PC from %r31 if currently in a syscall.  Also mask out privilege
+   bits.  */
+
+CORE_ADDR
+target_read_pc (pid)
+     int pid;
+{
+  int flags = read_register_pid (FLAGS_REGNUM, pid);
+
+  /* The following test does not belong here.  It is OS-specific, and belongs
+     in native code.  */
+  /* Test SS_INSYSCALL */
+  if (flags & 2)
+    return read_register_pid (31, pid) & ~0x3;
+
+  return read_register_pid (PC_REGNUM, pid) & ~0x3;
+}
+
+/* Write out the PC.  If currently in a syscall, then also write the new
+   PC value into %r31.  */
+
+void
+target_write_pc (v, pid)
+     CORE_ADDR v;
+     int pid;
+{
+  int flags = read_register_pid (FLAGS_REGNUM, pid);
+
+  /* The following test does not belong here.  It is OS-specific, and belongs
+     in native code.  */
+  /* If in a syscall, then set %r31.  Also make sure to get the 
+     privilege bits set correctly.  */
+  /* Test SS_INSYSCALL */
+  if (flags & 2)
+    write_register_pid (31, v | 0x3, pid);
+
+  write_register_pid (PC_REGNUM, v, pid);
+  write_register_pid (NPC_REGNUM, v + 4, pid);
+}
+
+/* return the alignment of a type in bytes. Structures have the maximum
+   alignment required by their fields. */
+
+static int
+hppa_alignof (type)
+     struct type *type;
+{
+  int max_align, align, i;
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_FLT:
+      return TYPE_LENGTH (type);
+    case TYPE_CODE_ARRAY:
+      return hppa_alignof (TYPE_FIELD_TYPE (type, 0));
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+      max_align = 1;
+      for (i = 0; i < TYPE_NFIELDS (type); i++)
+	{
+	  /* Bit fields have no real alignment. */
+	  /* if (!TYPE_FIELD_BITPOS (type, i)) */
+	  if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */
+	    {
+	      align = hppa_alignof (TYPE_FIELD_TYPE (type, i));
+	      max_align = max (max_align, align);
+	    }
+	}
+      return max_align;
+    default:
+      return 4;
+    }
+}
+
+/* Print the register regnum, or all registers if regnum is -1 */
+
+void
+pa_do_registers_info (regnum, fpregs)
+     int regnum;
+     int fpregs;
+{
+  char raw_regs [REGISTER_BYTES];
+  int i;
+
+  /* Make a copy of gdb's save area (may cause actual
+     reads from the target). */
+  for (i = 0; i < NUM_REGS; i++)
+    read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
+
+  if (regnum == -1)
+    pa_print_registers (raw_regs, regnum, fpregs);
+  else if (regnum < FP4_REGNUM) {
+    long reg_val[2];
+      
+    /* Why is the value not passed through "extract_signed_integer"
+       as in "pa_print_registers" below? */
+    pa_register_look_aside(raw_regs, regnum, &reg_val[0]);
+
+    if(!is_pa_2) {
+      printf_unfiltered ("%s %x\n", REGISTER_NAME (regnum), reg_val[1]);
+    }
+    else {
+      /* Fancy % formats to prevent leading zeros. */
+      if(reg_val[0] == 0)
+	printf_unfiltered("%s %x\n", REGISTER_NAME (regnum), reg_val[1]);
+      else
+	printf_unfiltered("%s %x%8.8x\n", REGISTER_NAME (regnum),
+			   reg_val[0], reg_val[1]);        
+    }
+  }
+  else
+      /* Note that real floating point values only start at
+         FP4_REGNUM.  FP0 and up are just status and error
+         registers, which have integral (bit) values. */
+    pa_print_fp_reg (regnum);
+}
+
+/********** new function ********************/
+void
+pa_do_strcat_registers_info (regnum, fpregs, stream, precision)
+     int regnum;
+     int fpregs;
+     GDB_FILE *stream;
+     enum precision_type precision;
+{
+  char raw_regs [REGISTER_BYTES];
+  int i;
+
+  /* Make a copy of gdb's save area (may cause actual
+     reads from the target). */  
+  for (i = 0; i < NUM_REGS; i++)
+    read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i));
+
+  if (regnum == -1)
+    pa_strcat_registers (raw_regs, regnum, fpregs, stream);
+
+  else if (regnum < FP4_REGNUM) {
+    long reg_val[2];
+      
+    /* Why is the value not passed through "extract_signed_integer"
+       as in "pa_print_registers" below? */
+    pa_register_look_aside(raw_regs, regnum, &reg_val[0]);
+
+    if(!is_pa_2) {
+      fprintf_unfiltered (stream, "%s %x", REGISTER_NAME (regnum), reg_val[1]);
+    }
+    else {
+      /* Fancy % formats to prevent leading zeros. */
+      if(reg_val[0] == 0)
+	fprintf_unfiltered(stream, "%s %x", REGISTER_NAME (regnum),
+			   reg_val[1]);
+      else
+	fprintf_unfiltered(stream, "%s %x%8.8x", REGISTER_NAME (regnum),
+			   reg_val[0], reg_val[1]);        
+    }
+  }
+  else
+      /* Note that real floating point values only start at
+         FP4_REGNUM.  FP0 and up are just status and error
+         registers, which have integral (bit) values. */
+    pa_strcat_fp_reg (regnum, stream, precision);
+}
+
+/* If this is a PA2.0 machine, fetch the real 64-bit register
+   value.  Otherwise use the info from gdb's saved register area.
+
+   Note that reg_val is really expected to be an array of longs,
+   with two elements. */
+static void
+pa_register_look_aside(raw_regs, regnum, raw_val)
+     char *raw_regs;
+     int   regnum;
+     long *raw_val;
+{
+  static int know_which = 0;  /* False */
+
+  int          regaddr;
+  unsigned int offset;
+  register int i;
+  int          start;
+  
+  
+  char buf[MAX_REGISTER_RAW_SIZE];
+  long long reg_val;
+
+  if(!know_which) {
+     if(CPU_PA_RISC2_0 == sysconf(_SC_CPU_VERSION)) {
+        is_pa_2 = (1==1);
+     }
+     
+     know_which = 1;  /* True */
+  }
+
+  raw_val[0] = 0;
+  raw_val[1] = 0;
+
+  if(!is_pa_2) {
+      raw_val[1] = *(long *)(raw_regs + REGISTER_BYTE(regnum));
+      return;
+  }
+
+  /* Code below copied from hppah-nat.c, with fixes for wide
+     registers, using different area of save_state, etc. */
+  if (regnum == FLAGS_REGNUM || regnum >= FP0_REGNUM ||
+      !HAVE_STRUCT_SAVE_STATE_T || !HAVE_STRUCT_MEMBER_SS_WIDE) {
+      /* Use narrow regs area of save_state and default macro. */
+      offset  = U_REGS_OFFSET;
+      regaddr = register_addr(regnum, offset);
+      start   = 1;
+  }
+  else {
+      /* Use wide regs area, and calculate registers as 8 bytes wide.
+
+         We'd like to do this, but current version of "C" doesn't
+         permit "offsetof":
+
+            offset  = offsetof(save_state_t, ss_wide);
+
+         Note that to avoid "C" doing typed pointer arithmetic, we
+         have to cast away the type in our offset calculation:
+         otherwise we get an offset of 1! */
+
+      /* #if the following code out so that this file can still be
+         compiled on older HPUX boxes (< 10.20) which don't have
+         this structure/structure member.  */
+#if HAVE_STRUCT_SAVE_STATE_T == 1 && HAVE_STRUCT_MEMBER_SS_WIDE == 1
+      save_state_t temp;
+
+      offset = ((int) &temp.ss_wide) - ((int) &temp);
+      regaddr = offset + regnum * 8;
+      start   = 0;
+#endif
+  }
+   
+  for(i = start; i < 2; i++)
+    {
+      errno = 0;
+      raw_val[i] = call_ptrace (PT_RUREGS, inferior_pid,
+  	 	                (PTRACE_ARG3_TYPE) regaddr, 0);
+      if (errno != 0)
+	{
+	  /* Warning, not error, in case we are attached; sometimes the
+	     kernel doesn't let us at the registers.  */
+	  char *err = safe_strerror (errno);
+	  char *msg = alloca (strlen (err) + 128);
+	  sprintf (msg, "reading register %s: %s", REGISTER_NAME (regnum), err);
+	  warning (msg);
+	  goto error_exit;
+	}
+
+      regaddr += sizeof (long);
+    }
+    
+  if (regnum == PCOQ_HEAD_REGNUM || regnum == PCOQ_TAIL_REGNUM)
+    raw_val[1] &= ~0x3; /* I think we're masking out space bits */
+
+error_exit:
+  ;
+}
+
+/* "Info all-reg" command */
+                                                    
+static void
+pa_print_registers (raw_regs, regnum, fpregs)
+     char *raw_regs;
+     int regnum;
+     int fpregs;
+{
+  int i,j;
+  long raw_val[2];   /* Alas, we are compiled so that "long long" is 32 bits */
+  long long_val;
+
+  for (i = 0; i < 18; i++)
+    {
+      for (j = 0; j < 4; j++)
+	{
+          /* Q: Why is the value passed through "extract_signed_integer",
+	        while above, in "pa_do_registers_info" it isn't?
+             A: ? */
+	  pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]);
+
+          /* Even fancier % formats to prevent leading zeros
+             and still maintain the output in columns. */
+          if(!is_pa_2) {
+              /* Being big-endian, on this machine the low bits
+                 (the ones we want to look at) are in the second longword. */
+   	      long_val = extract_signed_integer (&raw_val[1], 4);
+  	      printf_filtered ("%8.8s: %8x  ",
+			       REGISTER_NAME (i+(j*18)), long_val);
+	  }
+          else {
+   	      /* raw_val = extract_signed_integer(&raw_val, 8); */
+              if(raw_val[0] == 0)
+  	          printf_filtered("%8.8s:         %8x  ",
+				  REGISTER_NAME (i+(j*18)), raw_val[1]);
+              else
+  	          printf_filtered("%8.8s: %8x%8.8x  ", REGISTER_NAME (i+(j*18)),
+				  raw_val[0], raw_val[1]);
+          }
+	}
+      printf_unfiltered ("\n");
+    }
+  
+  if (fpregs)
+  for (i = FP4_REGNUM; i < NUM_REGS; i++)  /* FP4_REGNUM == 72 */
+      pa_print_fp_reg (i);
+}
+
+/************* new function ******************/                                                    
+static void
+pa_strcat_registers (raw_regs, regnum, fpregs, stream)
+     char *raw_regs;
+     int regnum;
+     int fpregs;
+     GDB_FILE *stream;
+{
+  int i,j;
+  long raw_val[2];   /* Alas, we are compiled so that "long long" is 32 bits */
+  long long_val;
+  enum precision_type precision;
+
+  precision = unspecified_precision;
+
+  for (i = 0; i < 18; i++)
+    {
+      for (j = 0; j < 4; j++)
+	{
+          /* Q: Why is the value passed through "extract_signed_integer",
+                while above, in "pa_do_registers_info" it isn't?
+             A: ? */
+	  pa_register_look_aside(raw_regs, i+(j*18), &raw_val[0]);
+
+          /* Even fancier % formats to prevent leading zeros
+             and still maintain the output in columns. */
+          if(!is_pa_2) {
+              /* Being big-endian, on this machine the low bits
+                 (the ones we want to look at) are in the second longword. */
+   	      long_val = extract_signed_integer(&raw_val[1], 4);
+  	      fprintf_filtered (stream, "%8.8s: %8x  ", REGISTER_NAME (i+(j*18)), long_val);
+	  }
+          else {
+   	      /* raw_val = extract_signed_integer(&raw_val, 8); */
+              if(raw_val[0] == 0)
+  	          fprintf_filtered(stream, "%8.8s:         %8x  ", REGISTER_NAME (i+(j*18)),
+                                   raw_val[1]);
+              else
+  	          fprintf_filtered(stream, "%8.8s: %8x%8.8x  ", REGISTER_NAME (i+(j*18)),
+                                    raw_val[0], raw_val[1]);
+          }
+	}
+      fprintf_unfiltered (stream, "\n");
+    }
+  
+  if (fpregs)
+  for (i = FP4_REGNUM; i < NUM_REGS; i++)  /* FP4_REGNUM == 72 */
+      pa_strcat_fp_reg (i, stream, precision);
+}
+
+static void
+pa_print_fp_reg (i)
+     int i;
+{
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+
+  /* Get 32bits of data.  */
+  read_relative_register_raw_bytes (i, raw_buffer);
+
+  /* Put it in the buffer.  No conversions are ever necessary.  */
+  memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i));
+
+  fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+  print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
+  fputs_filtered ("(single precision)     ", gdb_stdout);
+
+  val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0,
+	     1, 0, Val_pretty_default);
+  printf_filtered ("\n");
+
+  /* If "i" is even, then this register can also be a double-precision
+     FP register.  Dump it out as such.  */
+  if ((i % 2) == 0)
+    {
+      /* Get the data in raw format for the 2nd half.  */
+      read_relative_register_raw_bytes (i + 1, raw_buffer);
+
+      /* Copy it into the appropriate part of the virtual buffer.  */
+      memcpy (virtual_buffer + REGISTER_RAW_SIZE (i), raw_buffer,
+	      REGISTER_RAW_SIZE (i));
+
+      /* Dump it as a double.  */
+      fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+      print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout);
+      fputs_filtered ("(double precision)     ", gdb_stdout);
+
+      val_print (builtin_type_double, virtual_buffer, 0, 0, gdb_stdout, 0,
+		 1, 0, Val_pretty_default);
+      printf_filtered ("\n");
+    }
+}
+
+/*************** new function ***********************/
+static void
+pa_strcat_fp_reg (i, stream, precision)
+     int i;
+     GDB_FILE *stream;
+     enum precision_type precision;
+{
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+
+  fputs_filtered (REGISTER_NAME (i), stream);
+  print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), stream);
+
+  /* Get 32bits of data.  */
+  read_relative_register_raw_bytes (i, raw_buffer);
+
+  /* Put it in the buffer.  No conversions are ever necessary.  */
+  memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i));
+
+  if (precision == double_precision && (i % 2) == 0)
+    {
+
+    char raw_buf[MAX_REGISTER_RAW_SIZE];
+ 
+    /* Get the data in raw format for the 2nd half.  */
+    read_relative_register_raw_bytes (i + 1, raw_buf);
+ 
+    /* Copy it into the appropriate part of the virtual buffer.  */
+    memcpy (virtual_buffer + REGISTER_RAW_SIZE(i), raw_buf, REGISTER_RAW_SIZE (i));
+
+    val_print (builtin_type_double, virtual_buffer, 0, 0 , stream, 0, 
+               1, 0, Val_pretty_default);
+
+    }
+  else { 
+    val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, stream, 0,
+	       1, 0, Val_pretty_default);
+  }
+
+}
+
+/* Return one if PC is in the call path of a trampoline, else return zero.
+
+   Note we return one for *any* call trampoline (long-call, arg-reloc), not
+   just shared library trampolines (import, export).  */
+
+int
+in_solib_call_trampoline (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  struct minimal_symbol *minsym;
+  struct unwind_table_entry *u;
+  static CORE_ADDR dyncall = 0;
+  static CORE_ADDR sr4export = 0;
+
+/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+   new exec file */
+
+  /* First see if PC is in one of the two C-library trampolines.  */
+  if (!dyncall)
+    {
+      minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+      if (minsym)
+	dyncall = SYMBOL_VALUE_ADDRESS (minsym);
+      else
+	dyncall = -1;
+    }
+
+  if (!sr4export)
+    {
+      minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+      if (minsym)
+	sr4export = SYMBOL_VALUE_ADDRESS (minsym);
+      else
+	sr4export = -1;
+    }
+
+  if (pc == dyncall || pc == sr4export)
+    return 1;
+
+  /* Get the unwind descriptor corresponding to PC, return zero
+     if no unwind was found.  */
+  u = find_unwind_entry (pc);
+  if (!u)
+    return 0;
+
+  /* If this isn't a linker stub, then return now.  */
+  if (u->stub_unwind.stub_type == 0)
+    return 0;
+
+  /* By definition a long-branch stub is a call stub.  */
+  if (u->stub_unwind.stub_type == LONG_BRANCH)
+    return 1;
+
+  /* The call and return path execute the same instructions within
+     an IMPORT stub!  So an IMPORT stub is both a call and return
+     trampoline.  */
+  if (u->stub_unwind.stub_type == IMPORT)
+    return 1;
+
+  /* Parameter relocation stubs always have a call path and may have a
+     return path.  */
+  if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+      || u->stub_unwind.stub_type == EXPORT)
+    {
+      CORE_ADDR addr;
+
+      /* Search forward from the current PC until we hit a branch
+	 or the end of the stub.  */
+      for (addr = pc; addr <= u->region_end; addr += 4)
+	{
+	  unsigned long insn;
+
+	  insn = read_memory_integer (addr, 4);
+
+	  /* Does it look like a bl?  If so then it's the call path, if
+	     we find a bv or be first, then we're on the return path.  */
+	  if ((insn & 0xfc00e000) == 0xe8000000)
+	    return 1;
+	  else if ((insn & 0xfc00e001) == 0xe800c000
+		   || (insn & 0xfc000000) == 0xe0000000)
+	    return 0;
+	}
+
+      /* Should never happen.  */
+      warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
+      return 0; /* purecov: deadcode */
+    }
+
+  /* Unknown stub type.  For now, just return zero.  */
+  return 0; /* purecov: deadcode */
+}
+
+/* Return one if PC is in the return path of a trampoline, else return zero.
+
+   Note we return one for *any* call trampoline (long-call, arg-reloc), not
+   just shared library trampolines (import, export).  */
+
+int
+in_solib_return_trampoline (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  struct unwind_table_entry *u;
+
+  /* Get the unwind descriptor corresponding to PC, return zero
+     if no unwind was found.  */
+  u = find_unwind_entry (pc);
+  if (!u)
+    return 0;
+
+  /* If this isn't a linker stub or it's just a long branch stub, then
+     return zero.  */
+  if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH)
+    return 0;
+
+  /* The call and return path execute the same instructions within
+     an IMPORT stub!  So an IMPORT stub is both a call and return
+     trampoline.  */
+  if (u->stub_unwind.stub_type == IMPORT)
+    return 1;
+
+  /* Parameter relocation stubs always have a call path and may have a
+     return path.  */
+  if (u->stub_unwind.stub_type == PARAMETER_RELOCATION
+      || u->stub_unwind.stub_type == EXPORT)
+    {
+      CORE_ADDR addr;
+
+      /* Search forward from the current PC until we hit a branch
+	 or the end of the stub.  */
+      for (addr = pc; addr <= u->region_end; addr += 4)
+	{
+	  unsigned long insn;
+
+	  insn = read_memory_integer (addr, 4);
+
+	  /* Does it look like a bl?  If so then it's the call path, if
+	     we find a bv or be first, then we're on the return path.  */
+	  if ((insn & 0xfc00e000) == 0xe8000000)
+	    return 0;
+	  else if ((insn & 0xfc00e001) == 0xe800c000
+		   || (insn & 0xfc000000) == 0xe0000000)
+	    return 1;
+	}
+
+      /* Should never happen.  */
+      warning ("Unable to find branch in parameter relocation stub.\n"); /* purecov: deadcode */
+      return 0; /* purecov: deadcode */
+    }
+
+  /* Unknown stub type.  For now, just return zero.  */
+  return 0; /* purecov: deadcode */
+
+}
+
+/* Figure out if PC is in a trampoline, and if so find out where
+   the trampoline will jump to.  If not in a trampoline, return zero.
+
+   Simple code examination probably is not a good idea since the code
+   sequences in trampolines can also appear in user code.
+
+   We use unwinds and information from the minimal symbol table to
+   determine when we're in a trampoline.  This won't work for ELF
+   (yet) since it doesn't create stub unwind entries.  Whether or
+   not ELF will create stub unwinds or normal unwinds for linker
+   stubs is still being debated.
+
+   This should handle simple calls through dyncall or sr4export,
+   long calls, argument relocation stubs, and dyncall/sr4export
+   calling an argument relocation stub.  It even handles some stubs
+   used in dynamic executables.  */
+
+# if 0
+CORE_ADDR
+skip_trampoline_code (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  return find_solib_trampoline_target(pc);
+}
+
+#endif
+
+CORE_ADDR
+skip_trampoline_code (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  long orig_pc = pc;
+  long prev_inst, curr_inst, loc;
+  static CORE_ADDR dyncall = 0;
+  static CORE_ADDR dyncall_external = 0;
+  static CORE_ADDR sr4export = 0;
+  struct minimal_symbol *msym;
+  struct unwind_table_entry *u;
+
+
+/* FIXME XXX - dyncall and sr4export must be initialized whenever we get a
+   new exec file */
+
+  if (!dyncall)
+    {
+      msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
+      if (msym)
+	dyncall = SYMBOL_VALUE_ADDRESS (msym);
+      else
+	dyncall = -1;
+    }
+
+  if (!dyncall_external)
+    {
+      msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL);
+      if (msym)
+	dyncall_external = SYMBOL_VALUE_ADDRESS (msym);
+      else
+	dyncall_external = -1;
+    }
+
+  if (!sr4export)
+    {
+      msym = lookup_minimal_symbol ("_sr4export", NULL, NULL);
+      if (msym)
+	sr4export = SYMBOL_VALUE_ADDRESS (msym);
+      else
+	sr4export = -1;
+    }
+
+  /* Addresses passed to dyncall may *NOT* be the actual address
+     of the function.  So we may have to do something special.  */
+  if (pc == dyncall)
+    {
+      pc = (CORE_ADDR) read_register (22);
+
+      /* If bit 30 (counting from the left) is on, then pc is the address of
+	 the PLT entry for this function, not the address of the function
+	 itself.  Bit 31 has meaning too, but only for MPE.  */
+      if (pc & 0x2)
+	pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+    }
+  if (pc == dyncall_external)
+    {
+      pc = (CORE_ADDR) read_register (22);
+      pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, 4);
+    }
+  else if (pc == sr4export)
+    pc = (CORE_ADDR) (read_register (22));
+
+  /* Get the unwind descriptor corresponding to PC, return zero
+     if no unwind was found.  */
+  u = find_unwind_entry (pc);
+  if (!u)
+    return 0;
+
+  /* If this isn't a linker stub, then return now.  */
+  /* elz: attention here! (FIXME) because of a compiler/linker 
+     error, some stubs which should have a non zero stub_unwind.stub_type 
+     have unfortunately a value of zero. So this function would return here
+     as if we were not in a trampoline. To fix this, we go look at the partial
+     symbol information, which reports this guy as a stub.
+     (FIXME): Unfortunately, we are not that lucky: it turns out that the 
+     partial symbol information is also wrong sometimes. This is because 
+     when it is entered (somread.c::som_symtab_read()) it can happen that
+     if the type of the symbol (from the som) is Entry, and the symbol is
+     in a shared library, then it can also be a trampoline.  This would
+     be OK, except that I believe the way they decide if we are ina shared library
+     does not work. SOOOO..., even if we have a regular function w/o trampolines
+     its minimal symbol can be assigned type mst_solib_trampoline.
+     Also, if we find that the symbol is a real stub, then we fix the unwind
+     descriptor, and define the stub type to be EXPORT.
+     Hopefully this is correct most of the times. */ 
+  if (u->stub_unwind.stub_type == 0)
+  {
+
+/* elz: NOTE (FIXME!) once the problem with the unwind information is fixed
+   we can delete all the code which appears between the lines */
+/*--------------------------------------------------------------------------*/
+    msym = lookup_minimal_symbol_by_pc (pc);
+
+    if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline)
+      return orig_pc == pc ? 0 : pc & ~0x3;
+
+    else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline)
+         {
+          struct objfile *objfile;
+          struct minimal_symbol *msymbol;
+          int function_found = 0;
+
+             /* go look if there is another minimal symbol with the same name as 
+                this one, but with type mst_text. This would happen if the msym
+                is an actual trampoline, in which case there would be another
+                symbol with the same name corresponding to the real function */
+
+             ALL_MSYMBOLS (objfile, msymbol)
+             {
+               if (MSYMBOL_TYPE (msymbol) == mst_text
+                    && STREQ (SYMBOL_NAME (msymbol) , SYMBOL_NAME (msym)))
+                 {
+                  function_found = 1;
+                  break;
+                 }
+             }
+
+            if (function_found)  
+                   /* the type of msym is correct (mst_solib_trampoline), but
+                      the unwind info is wrong, so set it to the correct value */
+                u->stub_unwind.stub_type = EXPORT;
+            else
+                   /* the stub type info in the unwind is correct (this is not a
+                      trampoline), but the msym type information is wrong, it
+                      should be mst_text. So we need to fix the msym, and also
+                      get out of this function */
+              {
+                  MSYMBOL_TYPE (msym) = mst_text;
+                  return orig_pc == pc ? 0 : pc & ~0x3;
+              }
+         }
+               
+/*--------------------------------------------------------------------------*/
+  }
+
+  /* It's a stub.  Search for a branch and figure out where it goes.
+     Note we have to handle multi insn branch sequences like ldil;ble.
+     Most (all?) other branches can be determined by examining the contents
+     of certain registers and the stack.  */
+
+  loc = pc;
+  curr_inst = 0;
+  prev_inst = 0;
+  while (1)
+    {
+      /* Make sure we haven't walked outside the range of this stub.  */
+      if (u != find_unwind_entry (loc))
+	{
+	  warning ("Unable to find branch in linker stub");
+	  return orig_pc == pc ? 0 : pc & ~0x3;
+	}
+
+      prev_inst = curr_inst;
+      curr_inst = read_memory_integer (loc, 4);
+
+      /* Does it look like a branch external using %r1?  Then it's the
+	 branch from the stub to the actual function.  */
+      if ((curr_inst & 0xffe0e000) == 0xe0202000)
+	{
+	  /* Yup.  See if the previous instruction loaded
+	     a value into %r1.  If so compute and return the jump address.  */
+	  if ((prev_inst & 0xffe00000) == 0x20200000)
+	    return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3;
+	  else
+	    {
+	      warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1).");
+	      return orig_pc == pc ? 0 : pc & ~0x3;
+	    }
+	}
+
+      /* Does it look like a be 0(sr0,%r21)? OR 
+         Does it look like a be, n 0(sr0,%r21)? OR 
+         Does it look like a bve (r21)? (this is on PA2.0)
+         Does it look like a bve, n(r21)? (this is also on PA2.0)
+         That's the branch from an
+	 import stub to an export stub.
+
+	 It is impossible to determine the target of the branch via
+	 simple examination of instructions and/or data (consider
+	 that the address in the plabel may be the address of the
+	 bind-on-reference routine in the dynamic loader).
+
+	 So we have try an alternative approach.
+
+	 Get the name of the symbol at our current location; it should
+	 be a stub symbol with the same name as the symbol in the
+	 shared library.
+
+	 Then lookup a minimal symbol with the same name; we should
+	 get the minimal symbol for the target routine in the shared
+	 library as those take precedence of import/export stubs.  */
+      if ((curr_inst == 0xe2a00000) ||
+          (curr_inst == 0xe2a00002) ||
+          (curr_inst == 0xeaa0d000) ||
+          (curr_inst == 0xeaa0d002))
+	{
+	  struct minimal_symbol *stubsym, *libsym;
+
+	  stubsym = lookup_minimal_symbol_by_pc (loc);
+	  if (stubsym == NULL)
+	    {
+	      warning ("Unable to find symbol for 0x%x", loc);
+	      return orig_pc == pc ? 0 : pc & ~0x3;
+	    }
+
+	  libsym = lookup_minimal_symbol (SYMBOL_NAME (stubsym), NULL, NULL);
+	  if (libsym == NULL)
+	    {
+	      warning ("Unable to find library symbol for %s\n",
+		       SYMBOL_NAME (stubsym));
+	      return orig_pc == pc ? 0 : pc & ~0x3;
+	    }
+
+	  return SYMBOL_VALUE (libsym);
+	}
+
+      /* Does it look like bl X,%rp or bl X,%r0?  Another way to do a
+	 branch from the stub to the actual function.  */
+      /*elz*/
+      else if ((curr_inst & 0xffe0e000) == 0xe8400000
+	       || (curr_inst & 0xffe0e000) == 0xe8000000
+               || (curr_inst & 0xffe0e000) == 0xe800A000)
+	return (loc + extract_17 (curr_inst) + 8) & ~0x3;
+
+      /* Does it look like bv (rp)?   Note this depends on the
+	 current stack pointer being the same as the stack
+	 pointer in the stub itself!  This is a branch on from the
+	 stub back to the original caller.  */
+      /*else if ((curr_inst & 0xffe0e000) == 0xe840c000)*/
+      else if ((curr_inst & 0xffe0f000) == 0xe840c000)
+	{
+	  /* Yup.  See if the previous instruction loaded
+	     rp from sp - 8.  */
+	  if (prev_inst == 0x4bc23ff1)
+	    return (read_memory_integer
+		    (read_register (SP_REGNUM) - 8, 4)) & ~0x3;
+	  else
+	    {
+	      warning ("Unable to find restore of %%rp before bv (%%rp).");
+	      return orig_pc == pc ? 0 : pc & ~0x3;
+	    }
+	}
+
+      /* elz: added this case to capture the new instruction
+         at the end of the return part of an export stub used by
+         the PA2.0: BVE, n (rp) */
+      else if ((curr_inst & 0xffe0f000) == 0xe840d000)
+	{
+	  return (read_memory_integer 
+		  (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+	}
+
+      /* What about be,n 0(sr0,%rp)?  It's just another way we return to
+	 the original caller from the stub.  Used in dynamic executables.  */
+      else if (curr_inst == 0xe0400002)
+	{
+	  /* The value we jump to is sitting in sp - 24.  But that's
+	     loaded several instructions before the be instruction.
+	     I guess we could check for the previous instruction being
+	     mtsp %r1,%sr0 if we want to do sanity checking.  */
+	  return (read_memory_integer 
+		  (read_register (SP_REGNUM) - 24, 4)) & ~0x3;
+	}
+
+      /* Haven't found the branch yet, but we're still in the stub.
+	 Keep looking.  */
+      loc += 4;
+    }
+}
+
+
+/* For the given instruction (INST), return any adjustment it makes
+   to the stack pointer or zero for no adjustment. 
+
+   This only handles instructions commonly found in prologues.  */
+
+static int
+prologue_inst_adjust_sp (inst)
+     unsigned long inst;
+{
+  /* This must persist across calls.  */
+  static int save_high21;
+
+  /* The most common way to perform a stack adjustment ldo X(sp),sp */
+  if ((inst & 0xffffc000) == 0x37de0000)
+    return extract_14 (inst);
+
+  /* stwm X,D(sp) */
+  if ((inst & 0xffe00000) == 0x6fc00000)
+    return extract_14 (inst);
+
+  /* addil high21,%r1; ldo low11,(%r1),%r30)
+     save high bits in save_high21 for later use.  */
+  if ((inst & 0xffe00000) == 0x28200000)
+    {
+      save_high21 = extract_21 (inst);
+      return 0;
+    }
+
+  if ((inst & 0xffff0000) == 0x343e0000)
+    return save_high21 + extract_14 (inst);
+
+  /* fstws as used by the HP compilers.  */
+  if ((inst & 0xffffffe0) == 0x2fd01220)
+    return extract_5_load (inst);
+
+  /* No adjustment.  */
+  return 0;
+}
+
+/* Return nonzero if INST is a branch of some kind, else return zero.  */
+
+static int
+is_branch (inst)
+     unsigned long inst;
+{
+  switch (inst >> 26)
+    {
+    case 0x20:
+    case 0x21:
+    case 0x22:
+    case 0x23:
+    case 0x28:
+    case 0x29:
+    case 0x2a:
+    case 0x2b:
+    case 0x30:
+    case 0x31:
+    case 0x32:
+    case 0x33:
+    case 0x38:
+    case 0x39:
+    case 0x3a:
+      return 1;
+
+    default:
+      return 0;
+    }
+}
+
+/* Return the register number for a GR which is saved by INST or
+   zero it INST does not save a GR.  */
+
+static int
+inst_saves_gr (inst)
+     unsigned long inst;
+{
+  /* Does it look like a stw?  */
+  if ((inst >> 26) == 0x1a)
+    return extract_5R_store (inst);
+
+  /* Does it look like a stwm?  GCC & HPC may use this in prologues. */
+  if ((inst >> 26) == 0x1b)
+    return extract_5R_store (inst);
+
+  /* Does it look like sth or stb?  HPC versions 9.0 and later use these
+     too.  */
+  if ((inst >> 26) == 0x19 || (inst >> 26) == 0x18)
+    return extract_5R_store (inst);
+      
+  return 0;
+}
+
+/* Return the register number for a FR which is saved by INST or
+   zero it INST does not save a FR.
+
+   Note we only care about full 64bit register stores (that's the only
+   kind of stores the prologue will use).
+
+   FIXME: What about argument stores with the HP compiler in ANSI mode? */
+
+static int
+inst_saves_fr (inst)
+     unsigned long inst;
+{
+  /* is this an FSTDS ?*/
+  if ((inst & 0xfc00dfc0) == 0x2c001200)
+    return extract_5r_store (inst);
+  /* is this an FSTWS ?*/
+  if ((inst & 0xfc00df80) == 0x24001200)
+    return extract_5r_store (inst);
+  return 0;
+}
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code. 
+
+   Use information in the unwind table to determine what exactly should
+   be in the prologue.  */
+
+
+CORE_ADDR
+skip_prologue_hard_way (pc)
+     CORE_ADDR pc;
+{
+  char buf[4];
+  CORE_ADDR orig_pc = pc;
+  unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
+  unsigned long args_stored, status, i, restart_gr, restart_fr;
+  struct unwind_table_entry *u;
+
+  restart_gr = 0;
+  restart_fr = 0;
+
+restart:
+  u = find_unwind_entry (pc);
+  if (!u)
+    return pc;
+
+  /* If we are not at the beginning of a function, then return now. */ 
+  if ((pc & ~0x3) != u->region_start)
+    return pc;
+
+  /* This is how much of a frame adjustment we need to account for.  */
+  stack_remaining = u->Total_frame_size << 3;
+
+  /* Magic register saves we want to know about.  */
+  save_rp = u->Save_RP;
+  save_sp = u->Save_SP;
+
+  /* An indication that args may be stored into the stack.  Unfortunately
+     the HPUX compilers tend to set this in cases where no args were
+     stored too!.  */
+  args_stored = 1;
+
+  /* Turn the Entry_GR field into a bitmask.  */
+  save_gr = 0;
+  for (i = 3; i < u->Entry_GR + 3; i++)
+    {
+      /* Frame pointer gets saved into a special location.  */
+      if (u->Save_SP && i == FP_REGNUM)
+	continue;
+
+      save_gr |= (1 << i);
+    }
+  save_gr &= ~restart_gr;
+
+  /* Turn the Entry_FR field into a bitmask too.  */
+  save_fr = 0;
+  for (i = 12; i < u->Entry_FR + 12; i++)
+    save_fr |= (1 << i);
+  save_fr &= ~restart_fr;
+
+  /* Loop until we find everything of interest or hit a branch.
+
+     For unoptimized GCC code and for any HP CC code this will never ever
+     examine any user instructions.
+
+     For optimzied GCC code we're faced with problems.  GCC will schedule
+     its prologue and make prologue instructions available for delay slot
+     filling.  The end result is user code gets mixed in with the prologue
+     and a prologue instruction may be in the delay slot of the first branch
+     or call.
+
+     Some unexpected things are expected with debugging optimized code, so
+     we allow this routine to walk past user instructions in optimized
+     GCC code.  */
+  while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0
+	 || args_stored)
+    {
+      unsigned int reg_num;
+      unsigned long old_stack_remaining, old_save_gr, old_save_fr;
+      unsigned long old_save_rp, old_save_sp, next_inst;
+
+      /* Save copies of all the triggers so we can compare them later
+	 (only for HPC).  */
+      old_save_gr = save_gr;
+      old_save_fr = save_fr;
+      old_save_rp = save_rp;
+      old_save_sp = save_sp;
+      old_stack_remaining = stack_remaining;
+
+      status = target_read_memory (pc, buf, 4);
+      inst = extract_unsigned_integer (buf, 4);
+       
+      /* Yow! */
+      if (status != 0)
+	return pc;
+
+      /* Note the interesting effects of this instruction.  */
+      stack_remaining -= prologue_inst_adjust_sp (inst);
+
+      /* There is only one instruction used for saving RP into the stack.  */
+      if (inst == 0x6bc23fd9)
+	save_rp = 0;
+
+      /* This is the only way we save SP into the stack.  At this time
+	 the HP compilers never bother to save SP into the stack.  */
+      if ((inst & 0xffffc000) == 0x6fc10000)
+	save_sp = 0;
+
+      /* Account for general and floating-point register saves.  */
+      reg_num = inst_saves_gr (inst);
+      save_gr &= ~(1 << reg_num);
+
+      /* Ugh.  Also account for argument stores into the stack.
+	 Unfortunately args_stored only tells us that some arguments
+	 where stored into the stack.  Not how many or what kind!
+
+	 This is a kludge as on the HP compiler sets this bit and it
+	 never does prologue scheduling.  So once we see one, skip past
+	 all of them.   We have similar code for the fp arg stores below.
+
+	 FIXME.  Can still die if we have a mix of GR and FR argument
+	 stores!  */
+      if (reg_num >= 23 && reg_num <= 26)
+	{
+	  while (reg_num >= 23 && reg_num <= 26)
+	    {
+	      pc += 4;
+	      status = target_read_memory (pc, buf, 4);
+	      inst = extract_unsigned_integer (buf, 4);
+	      if (status != 0)
+		return pc;
+	      reg_num = inst_saves_gr (inst);
+	    }
+	  args_stored = 0;
+	  continue;
+	}
+
+      reg_num = inst_saves_fr (inst);
+      save_fr &= ~(1 << reg_num);
+
+      status = target_read_memory (pc + 4, buf, 4);
+      next_inst = extract_unsigned_integer (buf, 4);
+       
+      /* Yow! */
+      if (status != 0)
+	return pc;
+
+      /* We've got to be read to handle the ldo before the fp register
+	 save.  */
+      if ((inst & 0xfc000000) == 0x34000000
+	  && inst_saves_fr (next_inst) >= 4
+	  && inst_saves_fr (next_inst) <= 7)
+	{
+	  /* So we drop into the code below in a reasonable state.  */
+	  reg_num = inst_saves_fr (next_inst);
+	  pc -= 4;
+	}
+
+      /* Ugh.  Also account for argument stores into the stack.
+	 This is a kludge as on the HP compiler sets this bit and it
+	 never does prologue scheduling.  So once we see one, skip past
+	 all of them.  */
+      if (reg_num >= 4 && reg_num <= 7)
+	{
+	  while (reg_num >= 4 && reg_num <= 7)
+	    {
+	      pc += 8;
+	      status = target_read_memory (pc, buf, 4);
+	      inst = extract_unsigned_integer (buf, 4);
+	      if (status != 0)
+		return pc;
+	      if ((inst & 0xfc000000) != 0x34000000)
+		break;
+	      status = target_read_memory (pc + 4, buf, 4);
+	      next_inst = extract_unsigned_integer (buf, 4);
+	      if (status != 0)
+		return pc;
+	      reg_num = inst_saves_fr (next_inst);
+	    }
+	  args_stored = 0;
+	  continue;
+	}
+
+      /* Quit if we hit any kind of branch.  This can happen if a prologue
+	 instruction is in the delay slot of the first call/branch.  */
+      if (is_branch (inst))
+	break;
+
+      /* What a crock.  The HP compilers set args_stored even if no
+	 arguments were stored into the stack (boo hiss).  This could
+	 cause this code to then skip a bunch of user insns (up to the
+	 first branch).
+
+	 To combat this we try to identify when args_stored was bogusly
+	 set and clear it.   We only do this when args_stored is nonzero,
+	 all other resources are accounted for, and nothing changed on
+	 this pass.  */
+      if (args_stored
+	  && ! (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+	  && old_save_gr == save_gr && old_save_fr == save_fr
+	  && old_save_rp == save_rp && old_save_sp == save_sp
+	  && old_stack_remaining == stack_remaining)
+	break;
+      
+      /* Bump the PC.  */
+      pc += 4;
+    }
+
+  /* We've got a tenative location for the end of the prologue.  However
+     because of limitations in the unwind descriptor mechanism we may
+     have went too far into user code looking for the save of a register
+     that does not exist.  So, if there registers we expected to be saved
+     but never were, mask them out and restart.
+
+     This should only happen in optimized code, and should be very rare.  */
+  if (save_gr || (save_fr && ! (restart_fr || restart_gr)))
+    {
+      pc = orig_pc;
+      restart_gr = save_gr;
+      restart_fr = save_fr;
+      goto restart;
+    }
+
+  return pc;
+}
+
+
+
+
+
+/* return 0 if we cannot determine the end of the prologue,
+   return the new pc value if we know where the prologue ends */
+
+static CORE_ADDR
+after_prologue (pc)
+     CORE_ADDR pc;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR func_addr, func_end;
+  struct symbol *f;
+
+  if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    return 0;                   /* Unknown */
+
+  f = find_pc_function (pc);
+  if (!f)
+    return 0;			/* no debug info, do it the hard way! */
+
+  sal = find_pc_line (func_addr, 0);
+
+  if (sal.end < func_end)
+  {
+  /* this happens when the function has no prologue, because the way 
+     find_pc_line works: elz. Note: this may not be a very good
+     way to decide whether a function has a prologue or not, but
+     it is the best I can do with the info available
+     Also, this will work for functions like: int f()
+                                              {
+                                               return 2;
+                                              }
+    I.e. the bp will be inserted at the first open brace.
+    For functions where the body is only one line written like this:
+                                             int f()
+                                             { return 2; }
+   this will make the breakpoint to be at the last brace, after the body
+   has been executed already. What's the point of stepping through a function
+   without any variables anyway??  */
+
+    if ((SYMBOL_LINE(f) > 0) && (SYMBOL_LINE(f) < sal.line))
+     return pc; /*no adjusment will be made*/
+    else
+     return sal.end; /* this is the end of the prologue */
+  }
+  /* The line after the prologue is after the end of the function.  In this
+     case, put the end of the prologue is the beginning of the function.  */
+  /* This should happen only when the function is prologueless and has no
+     code in it. For instance void dumb(){} Note: this kind of function
+     is  used quite a lot in the test system */
+
+  else return pc; /* no adjustment will be made */
+}
+
+/* To skip prologues, I use this predicate.  Returns either PC itself
+   if the code at PC does not look like a function prologue; otherwise
+   returns an address that (if we're lucky) follows the prologue.  If
+   LENIENT, then we must skip everything which is involved in setting
+   up the frame (it's OK to skip more, just so long as we don't skip
+   anything which might clobber the registers which are being saved.
+   Currently we must not skip more on the alpha, but we might the lenient
+   stuff some day.  */
+
+CORE_ADDR
+skip_prologue (pc)
+     CORE_ADDR pc;
+{
+    unsigned long inst;
+    int offset;
+    CORE_ADDR post_prologue_pc;
+    char buf[4];
+
+#ifdef GDB_TARGET_HAS_SHARED_LIBS
+    /* Silently return the unaltered pc upon memory errors.
+       This could happen on OSF/1 if decode_line_1 tries to skip the
+       prologue for quickstarted shared library functions when the
+       shared library is not yet mapped in.
+       Reading target memory is slow over serial lines, so we perform
+       this check only if the target has shared libraries.  */
+    if (target_read_memory (pc, buf, 4))
+      return pc;
+#endif
+
+    /* See if we can determine the end of the prologue via the symbol table.
+       If so, then return either PC, or the PC after the prologue, whichever
+       is greater.  */
+
+    post_prologue_pc = after_prologue (pc);
+
+    if (post_prologue_pc != 0)
+      return max (pc, post_prologue_pc);
+
+
+   /* Can't determine prologue from the symbol table, (this can happen if there
+      is no debug information)  so we need to fall back on the old code, which
+      looks at the instructions */
+  /* FIXME (elz) !!!!: this may create a problem if, once the bp is hit, the user says
+     where: the backtrace info is not right: this is because the point at which we
+     break is at the very first instruction of the function. At this time the stuff that
+     needs to be saved on the stack, has not been saved yet, so the backtrace
+     cannot know all it needs to know. This will need to be fixed in the
+     actual backtrace code. (Note: this is what DDE does) */
+
+    else 
+
+      return (skip_prologue_hard_way(pc));
+
+#if 0
+/* elz: I am keeping this code around just in case, but remember, all the
+   instructions are for alpha: you should change all to the hppa instructions */
+
+    /* Can't determine prologue from the symbol table, need to examine
+       instructions.  */
+
+    /* Skip the typical prologue instructions. These are the stack adjustment
+       instruction and the instructions that save registers on the stack
+       or in the gcc frame.  */
+    for (offset = 0; offset < 100; offset += 4)
+      {
+        int status;
+
+        status = read_memory_nobpt (pc + offset, buf, 4);
+        if (status)
+          memory_error (status, pc + offset);
+        inst = extract_unsigned_integer (buf, 4);
+
+        /* The alpha has no delay slots. But let's keep the lenient stuff,
+           we might need it for something else in the future.  */
+        if (lenient && 0)
+          continue;
+
+        if ((inst & 0xffff0000) == 0x27bb0000) /* ldah $gp,n($t12) */
+	  continue;
+        if ((inst & 0xffff0000) == 0x23bd0000) /* lda $gp,n($gp) */
+            continue;
+        if ((inst & 0xffff0000) == 0x23de0000) /* lda $sp,n($sp) */
+            continue;
+        else if ((inst & 0xfc1f0000) == 0xb41e0000
+                 && (inst & 0xffff0000) != 0xb7fe0000)
+            continue;				/* stq reg,n($sp) */
+						/* reg != $zero */
+        else if ((inst & 0xfc1f0000) == 0x9c1e0000
+                 && (inst & 0xffff0000) != 0x9ffe0000)
+            continue;				/* stt reg,n($sp) */
+						/* reg != $zero */
+        else if (inst == 0x47de040f)            /* bis sp,sp,fp */
+            continue;
+        else
+            break;
+	    }
+    return pc + offset;
+#endif /* 0 */
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+void
+hppa_frame_find_saved_regs (frame_info, frame_saved_regs)
+     struct frame_info *frame_info;
+     struct frame_saved_regs *frame_saved_regs;
+{
+  CORE_ADDR pc;
+  struct unwind_table_entry *u;
+  unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
+  int status, i, reg;
+  char buf[4];
+  int fp_loc = -1;
+
+  /* Zero out everything.  */
+  memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs));
+
+  /* Call dummy frames always look the same, so there's no need to
+     examine the dummy code to determine locations of saved registers;
+     instead, let find_dummy_frame_regs fill in the correct offsets
+     for the saved registers.  */
+  if ((frame_info->pc >= frame_info->frame
+       && frame_info->pc <= (frame_info->frame + CALL_DUMMY_LENGTH
+			     + 32 * 4 +	 (NUM_REGS - FP0_REGNUM) * 8
+			     + 6 * 4)))	
+    find_dummy_frame_regs (frame_info, frame_saved_regs);
+
+  /* Interrupt handlers are special too.  They lay out the register
+     state in the exact same order as the register numbers in GDB.  */
+  if (pc_in_interrupt_handler (frame_info->pc))
+    {
+      for (i = 0; i < NUM_REGS; i++)
+	{
+	  /* SP is a little special.  */
+	  if (i == SP_REGNUM)
+	    frame_saved_regs->regs[SP_REGNUM]
+	      = read_memory_integer (frame_info->frame + SP_REGNUM * 4, 4);
+	  else
+	    frame_saved_regs->regs[i] = frame_info->frame + i * 4;
+	}
+      return;
+    }
+
+#ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP
+  /* Handle signal handler callers.  */
+  if (frame_info->signal_handler_caller)
+    {
+      FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs);
+      return;
+    }
+#endif
+
+  /* Get the starting address of the function referred to by the PC
+     saved in frame.  */
+  pc = get_pc_function_start (frame_info->pc);
+
+  /* Yow! */
+  u = find_unwind_entry (pc);
+  if (!u)
+    return;
+
+  /* This is how much of a frame adjustment we need to account for.  */
+  stack_remaining = u->Total_frame_size << 3;
+
+  /* Magic register saves we want to know about.  */
+  save_rp = u->Save_RP;
+  save_sp = u->Save_SP;
+
+  /* Turn the Entry_GR field into a bitmask.  */
+  save_gr = 0;
+  for (i = 3; i < u->Entry_GR + 3; i++)
+    {
+      /* Frame pointer gets saved into a special location.  */
+      if (u->Save_SP && i == FP_REGNUM)
+	continue;
+
+      save_gr |= (1 << i);
+    }
+
+  /* Turn the Entry_FR field into a bitmask too.  */
+  save_fr = 0;
+  for (i = 12; i < u->Entry_FR + 12; i++)
+    save_fr |= (1 << i);
+
+  /* The frame always represents the value of %sp at entry to the
+     current function (and is thus equivalent to the "saved" stack
+     pointer.  */
+  frame_saved_regs->regs[SP_REGNUM] = frame_info->frame;
+
+  /* Loop until we find everything of interest or hit a branch.
+
+     For unoptimized GCC code and for any HP CC code this will never ever
+     examine any user instructions.
+
+     For optimzied GCC code we're faced with problems.  GCC will schedule
+     its prologue and make prologue instructions available for delay slot
+     filling.  The end result is user code gets mixed in with the prologue
+     and a prologue instruction may be in the delay slot of the first branch
+     or call.
+
+     Some unexpected things are expected with debugging optimized code, so
+     we allow this routine to walk past user instructions in optimized
+     GCC code.  */
+  while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
+    {
+      status = target_read_memory (pc, buf, 4);
+      inst = extract_unsigned_integer (buf, 4);
+
+      /* Yow! */
+      if (status != 0)
+	return;
+
+      /* Note the interesting effects of this instruction.  */
+      stack_remaining -= prologue_inst_adjust_sp (inst);
+
+      /* There is only one instruction used for saving RP into the stack.  */
+      if (inst == 0x6bc23fd9)
+	{
+	  save_rp = 0;
+	  frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20;
+	}
+
+      /* Just note that we found the save of SP into the stack.  The
+	 value for frame_saved_regs was computed above.  */
+      if ((inst & 0xffffc000) == 0x6fc10000)
+	save_sp = 0;
+
+      /* Account for general and floating-point register saves.  */
+      reg = inst_saves_gr (inst);
+      if (reg >= 3 && reg <= 18
+	  && (!u->Save_SP || reg != FP_REGNUM))
+	{
+	  save_gr &= ~(1 << reg);
+
+	  /* stwm with a positive displacement is a *post modify*.  */
+	  if ((inst >> 26) == 0x1b
+	      && extract_14 (inst) >= 0)
+	    frame_saved_regs->regs[reg] = frame_info->frame;
+	  else
+	    {
+	      /* Handle code with and without frame pointers.  */
+	      if (u->Save_SP)
+		frame_saved_regs->regs[reg]
+		  = frame_info->frame + extract_14 (inst);
+	      else
+		frame_saved_regs->regs[reg]
+		  = frame_info->frame + (u->Total_frame_size << 3)
+		    + extract_14 (inst);
+	    }
+	}
+
+
+      /* GCC handles callee saved FP regs a little differently.  
+
+	 It emits an instruction to put the value of the start of
+	 the FP store area into %r1.  It then uses fstds,ma with
+	 a basereg of %r1 for the stores.
+
+	 HP CC emits them at the current stack pointer modifying
+	 the stack pointer as it stores each register.  */
+
+      /* ldo X(%r3),%r1 or ldo X(%r30),%r1.  */
+      if ((inst & 0xffffc000) == 0x34610000
+	  || (inst & 0xffffc000) == 0x37c10000)
+	fp_loc = extract_14 (inst);
+	
+      reg = inst_saves_fr (inst);
+      if (reg >= 12 && reg <= 21)
+	{
+	  /* Note +4 braindamage below is necessary because the FP status
+	     registers are internally 8 registers rather than the expected
+	     4 registers.  */
+	  save_fr &= ~(1 << reg);
+	  if (fp_loc == -1)
+	    {
+	      /* 1st HP CC FP register store.  After this instruction
+		 we've set enough state that the GCC and HPCC code are
+		 both handled in the same manner.  */
+	      frame_saved_regs->regs[reg + FP4_REGNUM + 4] = frame_info->frame;
+	      fp_loc = 8;
+	    }
+	  else
+	    {
+	      frame_saved_regs->regs[reg + FP0_REGNUM + 4]
+		= frame_info->frame + fp_loc;
+	      fp_loc += 8;
+	    }
+	}
+
+      /* Quit if we hit any kind of branch.  This can happen if a prologue
+	 instruction is in the delay slot of the first call/branch.  */
+      if (is_branch (inst))
+	break;
+
+      /* Bump the PC.  */
+      pc += 4;
+    }
+}
+
+
+/* Exception handling support for the HP-UX ANSI C++ compiler.
+   The compiler (aCC) provides a callback for exception events;
+   GDB can set a breakpoint on this callback and find out what
+   exception event has occurred. */
+
+/* The name of the hook to be set to point to the callback function */
+static char HP_ACC_EH_notify_hook[]     = "__eh_notify_hook";
+/* The name of the function to be used to set the hook value */ 
+static char HP_ACC_EH_set_hook_value[]  = "__eh_set_hook_value";
+/* The name of the callback function in end.o */ 
+static char HP_ACC_EH_notify_callback[] = "__d_eh_notify_callback";
+/* Name of function in end.o on which a break is set (called by above) */ 
+static char HP_ACC_EH_break[]           = "__d_eh_break";
+/* Name of flag (in end.o) that enables catching throws */ 
+static char HP_ACC_EH_catch_throw[]     = "__d_eh_catch_throw";
+/* Name of flag (in end.o) that enables catching catching */ 
+static char HP_ACC_EH_catch_catch[]     = "__d_eh_catch_catch";
+/* The enum used by aCC */ 
+typedef enum {
+  __EH_NOTIFY_THROW,
+  __EH_NOTIFY_CATCH
+} __eh_notification;
+
+/* Is exception-handling support available with this executable? */
+static int hp_cxx_exception_support = 0;
+/* Has the initialize function been run? */
+int hp_cxx_exception_support_initialized = 0;
+/* Similar to above, but imported from breakpoint.c -- non-target-specific */
+extern int exception_support_initialized;
+/* Address of __eh_notify_hook */
+static CORE_ADDR eh_notify_hook_addr = NULL;
+/* Address of __d_eh_notify_callback */
+static CORE_ADDR eh_notify_callback_addr = NULL;
+/* Address of __d_eh_break */
+static CORE_ADDR eh_break_addr = NULL;
+/* Address of __d_eh_catch_catch */
+static CORE_ADDR eh_catch_catch_addr = NULL;
+/* Address of __d_eh_catch_throw */
+static CORE_ADDR eh_catch_throw_addr = NULL;
+/* Sal for __d_eh_break */
+static struct symtab_and_line * break_callback_sal = NULL;
+
+/* Code in end.c expects __d_pid to be set in the inferior,
+   otherwise __d_eh_notify_callback doesn't bother to call
+   __d_eh_break!  So we poke the pid into this symbol
+   ourselves.
+   0 => success
+   1 => failure  */ 
+int
+setup_d_pid_in_inferior ()
+{
+  CORE_ADDR anaddr;
+  struct minimal_symbol * msymbol;
+  char buf[4]; /* FIXME 32x64? */
+  
+  /* Slam the pid of the process into __d_pid; failing is only a warning!  */
+  msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      warning ("Unable to find __d_pid symbol in object file.");
+      warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+      return 1;
+    }
+
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+  store_unsigned_integer (buf, 4, inferior_pid); /* FIXME 32x64? */
+  if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */
+    {
+      warning ("Unable to write __d_pid");
+      warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+      return 1;
+    }
+  return 0;
+}
+
+/* Initialize exception catchpoint support by looking for the
+   necessary hooks/callbacks in end.o, etc., and set the hook value to
+   point to the required debug function
+
+   Return 0 => failure
+          1 => success          */
+
+static int
+initialize_hp_cxx_exception_support ()
+{
+  struct symtabs_and_lines sals;
+  struct cleanup * old_chain;
+  struct cleanup * canonical_strings_chain = NULL;
+  int i;
+  char * addr_start;
+  char * addr_end = NULL;
+  char ** canonical = (char **) NULL;
+  int thread = -1;
+  struct symbol * sym = NULL;
+  struct minimal_symbol * msym = NULL;
+  struct objfile * objfile;
+  asection *shlib_info;
+
+  /* Detect and disallow recursion.  On HP-UX with aCC, infinite
+     recursion is a possibility because finding the hook for exception
+     callbacks involves making a call in the inferior, which means
+     re-inserting breakpoints which can re-invoke this code */
+
+  static int recurse = 0;  
+  if (recurse > 0) 
+    {
+      hp_cxx_exception_support_initialized = 0;
+      exception_support_initialized = 0;
+      return 0;
+    }
+
+  hp_cxx_exception_support = 0;
+
+  /* First check if we have seen any HP compiled objects; if not,
+     it is very unlikely that HP's idiosyncratic callback mechanism
+     for exception handling debug support will be available!
+     This will percolate back up to breakpoint.c, where our callers
+     will decide to try the g++ exception-handling support instead. */
+  if (!hp_som_som_object_present)
+    return 0;
+  
+  /* We have a SOM executable with SOM debug info; find the hooks */
+
+  /* First look for the notify hook provided by aCC runtime libs */
+  /* If we find this symbol, we conclude that the executable must
+     have HP aCC exception support built in.  If this symbol is not
+     found, even though we're a HP SOM-SOM file, we may have been
+     built with some other compiler (not aCC).  This results percolates
+     back up to our callers in breakpoint.c which can decide to
+     try the g++ style of exception support instead.
+     If this symbol is found but the other symbols we require are
+     not found, there is something weird going on, and g++ support
+     should *not* be tried as an alternative.
+     
+     ASSUMPTION: Only HP aCC code will have __eh_notify_hook defined.  
+     ASSUMPTION: HP aCC and g++ modules cannot be linked together. */
+  
+  /* libCsup has this hook; it'll usually be non-debuggable */
+  msym = lookup_minimal_symbol (HP_ACC_EH_notify_hook, NULL, NULL);
+  if (msym)
+    {
+      eh_notify_hook_addr = SYMBOL_VALUE_ADDRESS (msym);
+      hp_cxx_exception_support = 1;
+    }  
+  else
+    {
+      warning ("Unable to find exception callback hook (%s).", HP_ACC_EH_notify_hook);
+      warning ("Executable may not have been compiled debuggable with HP aCC.");
+      warning ("GDB will be unable to intercept exception events.");
+      eh_notify_hook_addr = 0;
+      hp_cxx_exception_support = 0;
+      return 0;
+    }
+
+#if 0 /* DEBUGGING */
+  printf ("Hook addr found is %lx\n", eh_notify_hook_addr);
+#endif
+
+  /* Next look for the notify callback routine in end.o */
+  /* This is always available in the SOM symbol dictionary if end.o is linked in */ 
+  msym = lookup_minimal_symbol (HP_ACC_EH_notify_callback, NULL, NULL);
+  if (msym)
+    {
+      eh_notify_callback_addr = SYMBOL_VALUE_ADDRESS (msym);
+      hp_cxx_exception_support = 1;
+    }  
+  else 
+    {
+      warning ("Unable to find exception callback routine (%s).", HP_ACC_EH_notify_callback);
+      warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o).");
+      warning ("GDB will be unable to intercept exception events.");
+      eh_notify_callback_addr = 0;
+      return 0;
+    }
+
+  /* Check whether the executable is dynamically linked or archive bound */
+  /* With an archive-bound executable we can use the raw addresses we find
+     for the callback function, etc. without modification. For an executable
+     with shared libraries, we have to do more work to find the plabel, which
+     can be the target of a call through $$dyncall from the aCC runtime support
+     library (libCsup) which is linked shared by default by aCC. */
+  /* This test below was copied from somsolib.c/somread.c.  It may not be a very
+     reliable one to test that an executable is linked shared. pai/1997-07-18 */ 
+  shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$");
+  if (shlib_info && (bfd_section_size (symfile_objfile->obfd, shlib_info) != 0))
+    {
+      /* The minsym we have has the local code address, but that's not the
+         plabel that can be used by an inter-load-module call. */
+      /* Find solib handle for main image (which has end.o), and use that
+         and the min sym as arguments to __d_shl_get() (which does the equivalent
+         of shl_findsym()) to find the plabel. */ 
+
+      args_for_find_stub args;
+      static char message[] = "Error while finding exception callback hook:\n";
+      
+      args.solib_handle = som_solib_get_solib_by_pc (eh_notify_callback_addr);
+      args.msym = msym;
+      
+      recurse++;
+      eh_notify_callback_addr = catch_errors ((int (*) PARAMS ((char *))) cover_find_stub_with_shl_get,
+                                              (char *) &args,
+                                              message, RETURN_MASK_ALL);
+      recurse--;
+      
+#if 0 /* DEBUGGING  */
+      printf ("found plabel for eh notify callback: %x\n", eh_notify_callback_addr);
+#endif
+
+      exception_catchpoints_are_fragile = 1;
+      
+      if (!eh_notify_callback_addr)
+        {
+          /* We can get here either if there is no plabel in the export list
+             for the main image, or if something strange happened (??) */ 
+          warning ("Couldn't find a plabel (indirect function label) for the exception callback.");
+          warning ("GDB will not be able to intercept exception events.");
+          return 0;
+        }
+    }
+  else
+    exception_catchpoints_are_fragile = 0;
+
+#if 0  /* DEBUGGING */
+  printf ("Cb addr found is %lx\n", eh_notify_callback_addr);
+#endif
+
+  /* Now, look for the breakpointable routine in end.o */
+  /* This should also be available in the SOM symbol dict. if end.o linked in */ 
+  msym = lookup_minimal_symbol (HP_ACC_EH_break, NULL, NULL);
+  if (msym)
+    {
+      eh_break_addr = SYMBOL_VALUE_ADDRESS (msym);
+      hp_cxx_exception_support = 1;
+    }  
+  else
+    {
+      warning ("Unable to find exception callback routine to set breakpoint (%s).", HP_ACC_EH_break);
+      warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+      warning ("GDB will be unable to intercept exception events.");
+      eh_break_addr = 0;
+      return 0;
+    }
+
+#if 0  /* DEBUGGING */
+  printf ("break addr found is %lx\n", eh_break_addr);  
+#endif
+  
+  /* Next look for the catch enable flag provided in end.o */
+  sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
+                       VAR_NAMESPACE, 0, (struct symtab **) NULL);
+  if (sym) /* sometimes present in debug info */ 
+    {
+      eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (sym);
+      hp_cxx_exception_support = 1;
+    }
+  else  /* otherwise look in SOM symbol dict. */ 
+    {
+      msym = lookup_minimal_symbol (HP_ACC_EH_catch_catch, NULL, NULL);
+      if (msym)
+        {
+          eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (msym);
+          hp_cxx_exception_support = 1;
+        }  
+      else
+        {
+          warning ("Unable to enable interception of exception catches.");
+          warning ("Executable may not have been compiled debuggable with HP aCC.");
+          warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+          return 0;
+        }
+    }
+
+#if 0  /* DEBUGGING */
+  printf ("catch catch addr found is %lx\n", eh_catch_catch_addr);
+#endif
+
+  /* Next look for the catch enable flag provided end.o */
+  sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL,
+                       VAR_NAMESPACE, 0, (struct symtab **) NULL);
+  if (sym) /* sometimes present in debug info */ 
+    {
+      eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (sym);
+      hp_cxx_exception_support = 1;
+    }
+  else /* otherwise look in SOM symbol dict. */ 
+    {
+      msym = lookup_minimal_symbol (HP_ACC_EH_catch_throw, NULL, NULL);
+      if (msym)
+        {
+          eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (msym);
+          hp_cxx_exception_support = 1;
+        }  
+      else
+        {
+          warning ("Unable to enable interception of exception throws.");
+          warning ("Executable may not have been compiled debuggable with HP aCC.");
+          warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o).");
+          return 0;
+        }
+    }
+
+#if 0  /* DEBUGGING */
+  printf ("catch throw addr found is %lx\n", eh_catch_throw_addr);
+#endif
+
+  /* Set the flags */ 
+  hp_cxx_exception_support = 2; /* everything worked so far */ 
+  hp_cxx_exception_support_initialized = 1;
+  exception_support_initialized = 1;
+
+  return 1;
+}
+
+/* Target operation for enabling or disabling interception of
+   exception events.
+   KIND is either EX_EVENT_THROW or EX_EVENT_CATCH
+   ENABLE is either 0 (disable) or 1 (enable).
+   Return value is NULL if no support found;
+   -1 if something went wrong,
+   or a pointer to a symtab/line struct if the breakpointable
+   address was found. */ 
+
+struct symtab_and_line * 
+child_enable_exception_callback (kind, enable)
+  enum exception_event_kind kind;
+  int enable;
+{
+  char buf[4];
+
+  if (!exception_support_initialized || !hp_cxx_exception_support_initialized)
+    if (!initialize_hp_cxx_exception_support ())
+      return NULL;
+
+  switch (hp_cxx_exception_support)
+    {
+      case 0:
+        /* Assuming no HP support at all */ 
+        return NULL;
+      case 1:
+        /* HP support should be present, but something went wrong */ 
+        return (struct symtab_and_line *) -1; /* yuck! */ 
+      /* there may be other cases in the future */ 
+    }
+        
+  /* Set the EH hook to point to the callback routine */
+  store_unsigned_integer (buf, 4, enable ? eh_notify_callback_addr : 0); /* FIXME 32x64 problem */
+  /* pai: (temp) FIXME should there be a pack operation first? */
+  if (target_write_memory (eh_notify_hook_addr, buf, 4))    /* FIXME 32x64 problem */
+    {
+      warning ("Could not write to target memory for exception event callback.");
+      warning ("Interception of exception events may not work.");
+      return (struct symtab_and_line *) -1; 
+    }
+  if (enable)
+    {
+      /* Ensure that __d_pid is set up correctly -- end.c code checks this. :-(*/
+      if (inferior_pid > 0)
+        {
+          if (setup_d_pid_in_inferior ())
+            return (struct symtab_and_line *) -1; 
+        }
+      else
+        {
+          warning ("Internal error: Invalid inferior pid?  Cannot intercept exception events."); /* purecov: deadcode */
+          return (struct symtab_and_line *) -1; /* purecov: deadcode */
+        }
+    }
+  
+  switch (kind)
+    {
+      case EX_EVENT_THROW:
+        store_unsigned_integer (buf, 4, enable ? 1 : 0);
+        if (target_write_memory (eh_catch_throw_addr, buf, 4)) /* FIXME 32x64? */
+          {
+            warning ("Couldn't enable exception throw interception.");
+            return (struct symtab_and_line *) -1;
+          }
+        break;
+      case EX_EVENT_CATCH:
+        store_unsigned_integer (buf, 4, enable ? 1 : 0);
+        if (target_write_memory (eh_catch_catch_addr, buf, 4)) /* FIXME 32x64? */
+          {
+            warning ("Couldn't enable exception catch interception.");
+            return (struct symtab_and_line *) -1;
+          }
+        break;
+      default: /* purecov: deadcode */
+        error ("Request to enable unknown or unsupported exception event."); /* purecov: deadcode */
+    }
+  
+  /* Copy break address into new sal struct, malloc'ing if needed. */
+  if (!break_callback_sal)
+    {
+      break_callback_sal = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line));
+    }
+  INIT_SAL(break_callback_sal);
+  break_callback_sal->symtab = NULL;
+  break_callback_sal->pc = eh_break_addr;
+  break_callback_sal->line = 0;
+  break_callback_sal->end = eh_break_addr;
+  
+  return break_callback_sal;
+}
+
+/* Record some information about the current exception event */ 
+static struct exception_event_record current_ex_event;
+/* Convenience struct */ 
+static struct symtab_and_line null_symtab_and_line = { NULL, 0, 0, 0 };
+
+/* Report current exception event.  Returns a pointer to a record
+   that describes the kind of the event, where it was thrown from,
+   and where it will be caught.  More information may be reported
+   in the future */ 
+struct exception_event_record *
+child_get_current_exception_event ()
+{
+  CORE_ADDR  event_kind;
+  CORE_ADDR  throw_addr;
+  CORE_ADDR  catch_addr;
+  struct frame_info *fi, *curr_frame;
+  int level = 1;
+
+  curr_frame = get_current_frame();
+  if (!curr_frame)
+    return (struct exception_event_record *) NULL;
+
+  /* Go up one frame to __d_eh_notify_callback, because at the
+     point when this code is executed, there's garbage in the
+     arguments of __d_eh_break. */
+  fi = find_relative_frame (curr_frame, &level);
+  if (level != 0)
+    return (struct exception_event_record *) NULL;
+
+  select_frame (fi, -1);
+
+  /* Read in the arguments */
+  /* __d_eh_notify_callback() is called with 3 arguments:
+          1. event kind catch or throw
+          2. the target address if known
+          3. a flag -- not sure what this is. pai/1997-07-17 */
+  event_kind = read_register (ARG0_REGNUM);  
+  catch_addr = read_register (ARG1_REGNUM);
+
+  /* Now go down to a user frame */
+  /* For a throw, __d_eh_break is called by
+                  __d_eh_notify_callback which is called by
+                  __notify_throw which is called
+                  from user code.
+     For a catch, __d_eh_break is called by
+                  __d_eh_notify_callback which is called by
+                  <stackwalking stuff> which is called by
+                  __throw__<stuff> or __rethrow_<stuff> which is called
+                  from user code. */
+  /* FIXME: Don't use such magic numbers; search for the frames */ 
+  level = (event_kind == EX_EVENT_THROW) ? 3 : 4;
+  fi = find_relative_frame (curr_frame, &level);
+  if (level != 0)
+    return (struct exception_event_record *) NULL;
+
+  select_frame (fi, -1);
+  throw_addr = fi->pc;
+
+  /* Go back to original (top) frame */
+  select_frame (curr_frame, -1);
+
+  current_ex_event.kind = (enum exception_event_kind) event_kind;
+  current_ex_event.throw_sal = find_pc_line (throw_addr, 1);
+  current_ex_event.catch_sal = find_pc_line (catch_addr, 1);
+
+  return &current_ex_event;
+}
+
+
+#ifdef MAINTENANCE_CMDS
+
+static void
+unwind_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  CORE_ADDR address;
+  struct unwind_table_entry *u;
+
+  /* If we have an expression, evaluate it and use it as the address.  */
+
+  if (exp != 0 && *exp != 0)
+    address = parse_and_eval_address (exp);
+  else
+    return;
+
+  u = find_unwind_entry (address);
+
+  if (!u)
+    {
+      printf_unfiltered ("Can't find unwind table entry for %s\n", exp);
+      return;
+    }
+
+  printf_unfiltered ("unwind_table_entry (0x%x):\n", u);
+
+  printf_unfiltered ("\tregion_start = ");
+  print_address (u->region_start, gdb_stdout);
+
+  printf_unfiltered ("\n\tregion_end = ");
+  print_address (u->region_end, gdb_stdout);
+
+#ifdef __STDC__
+#define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD);
+#else
+#define pif(FLD) if (u->FLD) printf_unfiltered (" FLD");
+#endif
+
+  printf_unfiltered ("\n\tflags =");
+  pif (Cannot_unwind);
+  pif (Millicode);
+  pif (Millicode_save_sr0);
+  pif (Entry_SR);
+  pif (Args_stored);
+  pif (Variable_Frame);
+  pif (Separate_Package_Body);
+  pif (Frame_Extension_Millicode);
+  pif (Stack_Overflow_Check);
+  pif (Two_Instruction_SP_Increment);
+  pif (Ada_Region);
+  pif (Save_SP);
+  pif (Save_RP);
+  pif (Save_MRP_in_frame);
+  pif (extn_ptr_defined);
+  pif (Cleanup_defined);
+  pif (MPE_XL_interrupt_marker);
+  pif (HP_UX_interrupt_marker);
+  pif (Large_frame);
+
+  putchar_unfiltered ('\n');
+
+#ifdef __STDC__
+#define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD);
+#else
+#define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD);
+#endif
+
+  pin (Region_description);
+  pin (Entry_FR);
+  pin (Entry_GR);
+  pin (Total_frame_size);
+}
+#endif /* MAINTENANCE_CMDS */
+
+#ifdef PREPARE_TO_PROCEED
+
+/* If the user has switched threads, and there is a breakpoint
+   at the old thread's pc location, then switch to that thread
+   and return TRUE, else return FALSE and don't do a thread
+   switch (or rather, don't seem to have done a thread switch).
+
+   Ptrace-based gdb will always return FALSE to the thread-switch
+   query, and thus also to PREPARE_TO_PROCEED.
+
+   The important thing is whether there is a BPT instruction,
+   not how many user breakpoints there are.  So we have to worry
+   about things like these:
+
+   o  Non-bp stop -- NO
+
+   o  User hits bp, no switch -- NO
+
+   o  User hits bp, switches threads -- YES
+
+   o  User hits bp, deletes bp, switches threads -- NO
+
+   o  User hits bp, deletes one of two or more bps
+      at that PC, user switches threads -- YES
+
+   o  Plus, since we're buffering events, the user may have hit a
+      breakpoint, deleted the breakpoint and then gotten another
+      hit on that same breakpoint on another thread which
+      actually hit before the delete. (FIXME in breakpoint.c
+      so that "dead" breakpoints are ignored?) -- NO
+
+   For these reasons, we have to violate information hiding and
+   call "breakpoint_here_p".  If core gdb thinks there is a bpt
+   here, that's what counts, as core gdb is the one which is
+   putting the BPT instruction in and taking it out. */
+int
+hppa_prepare_to_proceed()
+{
+  pid_t old_thread;
+  pid_t current_thread;
+
+  old_thread = hppa_switched_threads(inferior_pid);
+  if (old_thread != 0)
+    {
+      /* Switched over from "old_thread".  Try to do
+         as little work as possible, 'cause mostly
+         we're going to switch back. */
+      CORE_ADDR new_pc;
+      CORE_ADDR old_pc = read_pc();
+
+      /* Yuk, shouldn't use global to specify current
+         thread.  But that's how gdb does it. */
+      current_thread = inferior_pid;
+      inferior_pid   = old_thread;
+
+      new_pc = read_pc();
+      if (new_pc != old_pc          /* If at same pc, no need */
+	  && breakpoint_here_p (new_pc))
+        {
+	  /* User hasn't deleted the BP.
+             Return TRUE, finishing switch to "old_thread". */
+	  flush_cached_frames ();
+	  registers_changed ();
+#if 0
+	  printf("---> PREPARE_TO_PROCEED (was %d, now %d)!\n",
+		  current_thread, inferior_pid);
+#endif
+               
+	  return 1;
+        }
+
+      /* Otherwise switch back to the user-chosen thread. */
+      inferior_pid = current_thread;
+      new_pc       = read_pc();       /* Re-prime register cache */
+    }
+
+  return 0;
+}
+#endif /* PREPARE_TO_PROCEED */
+
+void
+_initialize_hppa_tdep ()
+{
+  tm_print_insn = print_insn_hppa;
+
+#ifdef MAINTENANCE_CMDS
+  add_cmd ("unwind", class_maintenance, unwind_command,
+	   "Print unwind table entry at given address.",
+	   &maintenanceprintlist);
+#endif /* MAINTENANCE_CMDS */
+}
diff --git a/gdb/hppab-nat.c b/gdb/hppab-nat.c
new file mode 100644
index 0000000..52ce1fd
--- /dev/null
+++ b/gdb/hppab-nat.c
@@ -0,0 +1,215 @@
+/* Machine-dependent hooks for the unix child process stratum.  This
+   code is for the HP PA-RISC cpu.
+
+   Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include <sys/ptrace.h>
+
+/* Use an extra level of indirection for ptrace calls.
+   This lets us breakpoint usefully on call_ptrace.   It also
+   allows us to pass an extra argument to ptrace without
+   using an ANSI-C specific macro.  */
+
+#define ptrace call_ptrace
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* U_REGS_OFFSET is the offset of the registers within the u area.  */
+#if !defined (U_REGS_OFFSET)
+#define U_REGS_OFFSET \
+  ptrace (PT_READ_U, inferior_pid, \
+          (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
+    - KERNEL_U_ADDR
+#endif
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  /* Offset of registers within the u area.  */
+  unsigned int offset;
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+    {
+      errno = 0;
+      *(int *) &buf[i] = ptrace (PT_RUREGS, inferior_pid,
+				 (PTRACE_ARG3_TYPE) regaddr, 0);
+      regaddr += sizeof (int);
+      if (errno != 0)
+	{
+	  /* Warning, not error, in case we are attached; sometimes the
+	     kernel doesn't let us at the registers.  */
+	  char *err = safe_strerror (errno);
+	  char *msg = alloca (strlen (err) + 128);
+	  sprintf (msg, "reading register %s: %s", REGISTER_NAME (regno), err);
+	  warning (msg);
+	  goto error_exit;
+	}
+    }
+  supply_register (regno, buf);
+ error_exit:;
+}
+
+/* Fetch all registers, or just one, from the child process.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno == -1)
+    for (regno = 0; regno < NUM_REGS; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+  extern char registers[];
+  register int i;
+  unsigned int offset = U_REGS_OFFSET;
+  int scratch;
+
+  if (regno >= 0)
+    {
+      if (CANNOT_STORE_REGISTER (regno))
+	return;
+      regaddr = register_addr (regno, offset);
+      errno = 0;
+      if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
+        {
+          scratch = *(int *) &registers[REGISTER_BYTE (regno)] | 0x3;
+          ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+                  scratch);
+          if (errno != 0)
+            {
+	      /* Error, even if attached.  Failing to write these two
+		 registers is pretty serious.  */
+              sprintf (buf, "writing register number %d", regno);
+              perror_with_name (buf);
+            }
+        }
+      else
+	for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
+	  {
+	    errno = 0;
+	    ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		    *(int *) &registers[REGISTER_BYTE (regno) + i]);
+	    if (errno != 0)
+	      {
+		/* Warning, not error, in case we are attached; sometimes the
+		   kernel doesn't let us at the registers.  */
+		char *err = safe_strerror (errno);
+		char *msg = alloca (strlen (err) + 128);
+		sprintf (msg, "writing register %s: %s",
+			 REGISTER_NAME (regno), err);
+		warning (msg);
+		return;
+	      }
+	    regaddr += sizeof(int);
+	  }
+    }
+  else
+    for (regno = 0; regno < NUM_REGS; regno++)
+      store_inferior_registers (regno);
+}
+
+/* PT_PROT is specific to the PA BSD kernel and isn't documented
+   anywhere (except here).  
+
+   PT_PROT allows one to enable/disable the data memory break bit
+   for pages of memory in an inferior process.  This bit is used
+   to cause "Data memory break traps" to occur when the appropriate
+   page is written to.
+
+   The arguments are as follows:
+
+      PT_PROT -- The ptrace action to perform.
+
+      INFERIOR_PID -- The pid of the process who's page table entries
+      will be modified.
+
+      PT_ARGS -- The *address* of a 3 word block of memory which has
+      additional information:
+
+        word 0 -- The start address to watch.  This should be a page-aligned
+	address.
+
+	word 1 -- The ending address to watch.  Again, this should be a 
+	page aligned address.
+
+	word 2 -- Nonzero to enable the data memory break bit on the
+	given address range or zero to disable the data memory break
+	bit on the given address range.
+
+  This call may fail if the given addresses are not valid in the inferior
+  process.  This most often happens when restarting a program which
+  as watchpoints inserted on heap or stack memory.  */
+	
+#define PT_PROT 21
+
+int
+hppa_set_watchpoint (addr, len, flag)
+     int addr, len, flag;
+{
+  int pt_args[3];
+  pt_args[0] = addr;
+  pt_args[1] = addr + len;
+  pt_args[2] = flag;
+
+  /* Mask off the lower 12 bits since we want to work on a page basis.  */
+  pt_args[0] >>= 12; 
+  pt_args[1] >>= 12; 
+
+  /* Rounding adjustments.  */
+  pt_args[1] -= pt_args[0]; 
+  pt_args[1]++; 
+
+  /* Put the lower 12 bits back as zero.  */
+  pt_args[0] <<= 12; 
+  pt_args[1] <<= 12; 
+
+  /* Do it.  */
+  return ptrace (PT_PROT, inferior_pid, (PTRACE_ARG3_TYPE) pt_args, 0);
+}
diff --git a/gdb/hppah-nat.c b/gdb/hppah-nat.c
new file mode 100644
index 0000000..ac7f69f
--- /dev/null
+++ b/gdb/hppah-nat.c
@@ -0,0 +1,1059 @@
+/* Native support code for HPUX PA-RISC.
+   Copyright 1986, 1987, 1989, 1990, 1991, 1992, 1993, 1998
+   Free Software Foundation, Inc.
+
+   Contributed by the Center for Software Science at the
+   University of Utah (pa-gdb-bugs@cs.utah.edu).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include <sys/ptrace.h>
+#include "gdbcore.h"
+#include <wait.h>
+#include <signal.h>
+
+extern CORE_ADDR text_end;
+
+static void fetch_register PARAMS ((int));
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno == -1)
+    for (regno = 0; regno < NUM_REGS; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+  extern char registers[];
+  register int i;
+  unsigned int offset = U_REGS_OFFSET;
+  int scratch;
+
+  if (regno >= 0)
+    {
+      if (CANNOT_STORE_REGISTER (regno))
+	return;
+      regaddr = register_addr (regno, offset);
+      errno = 0;
+      if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
+        {
+          scratch = *(int *) &registers[REGISTER_BYTE (regno)] | 0x3;
+          call_ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+                  scratch);
+          if (errno != 0)
+            {
+	      /* Error, even if attached.  Failing to write these two
+		 registers is pretty serious.  */
+              sprintf (buf, "writing register number %d", regno);
+              perror_with_name (buf);
+            }
+        }
+      else
+	for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(int))
+	  {
+	    errno = 0;
+	    call_ptrace (PT_WUREGS, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		    *(int *) &registers[REGISTER_BYTE (regno) + i]);
+	    if (errno != 0)
+	      {
+		/* Warning, not error, in case we are attached; sometimes the
+		   kernel doesn't let us at the registers.  */
+		char *err = safe_strerror (errno);
+		char *msg = alloca (strlen (err) + 128);
+		sprintf (msg, "writing register %s: %s",
+			 REGISTER_NAME (regno), err);
+		warning (msg);
+		return;
+	      }
+	    regaddr += sizeof(int);
+	  }
+    }
+  else
+    for (regno = 0; regno < NUM_REGS; regno++)
+      store_inferior_registers (regno);
+}
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  /* Offset of registers within the u area.  */
+  unsigned int offset;
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+    {
+      errno = 0;
+      *(int *) &buf[i] = call_ptrace (PT_RUREGS, inferior_pid,
+				 (PTRACE_ARG3_TYPE) regaddr, 0);
+      regaddr += sizeof (int);
+      if (errno != 0)
+	{
+	  /* Warning, not error, in case we are attached; sometimes the
+	   * kernel doesn't let us at the registers.
+	   */
+	  char *err = safe_strerror (errno);
+	  char *msg = alloca (strlen (err) + 128);
+	  sprintf (msg, "reading register %s: %s", REGISTER_NAME (regno), err);
+	  warning (msg);
+	  goto error_exit;
+	}
+    }
+  if (regno == PCOQ_HEAD_REGNUM || regno == PCOQ_TAIL_REGNUM)
+    buf[3] &= ~0x3;
+  supply_register (regno, buf);
+ error_exit:;
+}
+
+/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.   Copy to inferior if
+   WRITE is nonzero.
+  
+   Returns the length copied, which is either the LEN argument or zero.
+   This xfer function does not do partial moves, since child_ops
+   doesn't allow memory operations to cross below us in the target stack
+   anyway.  */
+
+int
+child_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & - sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+
+  /* Allocate buffer of that many longwords.  */
+  /* Note (RT) - This code formerly used alloca, which I have
+   * replaced with xmalloc and a matching free() at the end.
+   * The problem with alloca() is that there is no guarantee of
+   * when it'll be freed, and we were seeing cases of memory
+   * leaks on:
+   * (gdb) watch x
+   * (gdb) cont
+   * where the piled-up alloca's for the child_xfer_memory buffers
+   * were not getting freed.
+   */
+  register int *buffer = (int *) xmalloc (count * sizeof (int));
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int)sizeof (int)) {
+	/* Need part of initial word -- fetch it.  */
+        buffer[0] = call_ptrace (addr < text_end ? PT_RIUSER : PT_RDUSER, 
+			    inferior_pid, (PTRACE_ARG3_TYPE) addr, 0);
+      }
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1]
+	    = call_ptrace (addr < text_end ? PT_RIUSER : PT_RDUSER, inferior_pid,
+		      (PTRACE_ARG3_TYPE) (addr + (count - 1) * sizeof (int)),
+		      0);
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+          int  pt_status;
+          int  pt_request;
+	  /* The HP-UX kernel crashes if you use PT_WDUSER to write into the text
+	     segment.  FIXME -- does it work to write into the data segment using
+	     WIUSER, or do these idiots really expect us to figure out which segment
+	     the address is in, so we can use a separate system call for it??!  */
+	  errno = 0;
+          pt_request = (addr < text_end) ? PT_WIUSER : PT_WDUSER;
+	  pt_status = call_ptrace (pt_request,
+                                   inferior_pid, 
+                                   (PTRACE_ARG3_TYPE) addr,
+                                   buffer[i]);
+
+          /* Did we fail?  Might we've guessed wrong about which
+             segment this address resides in?  Try the other request,
+             and see if that works...
+             */
+	  if ((pt_status == -1) && errno) {
+            errno = 0;
+            pt_request = (pt_request == PT_WIUSER) ? PT_WDUSER : PT_WIUSER;
+            pt_status = call_ptrace (pt_request,
+                                     inferior_pid, 
+                                     (PTRACE_ARG3_TYPE) addr,
+                                     buffer[i]);
+
+            /* No, we still fail.  Okay, time to punt. */
+            if ((pt_status == -1) && errno)
+              {
+                free(buffer);
+                return 0;
+              }
+	  }
+	}
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+	  errno = 0;
+	  buffer[i] = call_ptrace (addr < text_end ? PT_RIUSER : PT_RDUSER, 
+			      inferior_pid, (PTRACE_ARG3_TYPE) addr, 0);
+	  if (errno) {
+	    free(buffer);
+	    return 0;
+	  }
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+    }
+  free(buffer);
+  return len;
+}
+
+
+void
+child_post_follow_inferior_by_clone ()
+{
+  int  status;
+
+  /* This function is used when following both the parent and child
+     of a fork.  In this case, the debugger clones itself.  The original
+     debugger follows the parent, the clone follows the child.  The
+     original detaches from the child, delivering a SIGSTOP to it to
+     keep it from running away until the clone can attach itself.
+
+     At this point, the clone has attached to the child.  Because of
+     the SIGSTOP, we must now deliver a SIGCONT to the child, or it
+     won't behave properly. */
+  status = kill (inferior_pid, SIGCONT);
+}
+
+
+void
+child_post_follow_vfork (parent_pid, followed_parent, child_pid, followed_child)
+     int  parent_pid;
+     int  followed_parent;
+     int  child_pid;
+     int  followed_child;
+{
+
+  /* Are we a debugger that followed the parent of a vfork?  If so,
+     then recall that the child's vfork event was delivered to us
+     first.  And, that the parent was suspended by the OS until the
+     child's exec or exit events were received.
+
+     Upon receiving that child vfork, then, we were forced to remove
+     all breakpoints in the child and continue it so that it could
+     reach the exec or exit point.
+
+     But also recall that the parent and child of a vfork share the
+     same address space.  Thus, removing bp's in the child also
+     removed them from the parent.
+
+     Now that the child has safely exec'd or exited, we must restore
+     the parent's breakpoints before we continue it.  Else, we may
+     cause it run past expected stopping points. */
+  if (followed_parent)
+    {
+      reattach_breakpoints (parent_pid);
+    }
+
+  /* Are we a debugger that followed the child of a vfork?  If so,
+     then recall that we don't actually acquire control of the child
+     until after it has exec'd or exited.
+     */
+  if (followed_child)
+    {
+      /* If the child has exited, then there's nothing for us to do.
+         In the case of an exec event, we'll let that be handled by
+         the normal mechanism that notices and handles exec events, in
+         resume(). */
+
+    }
+}
+
+/* Format a process id, given a pid.  Be sure to terminate
+ * this with a null--it's going to be printed via a "%s".
+ */
+char *
+hppa_pid_to_str( pid )
+    pid_t pid;
+{
+    static char buf[30]; /* Static because address returned */
+
+    sprintf( buf, "process %d\0\0\0\0", pid );
+             /* Extra NULLs for paranoia's sake */
+             
+    return buf;
+}
+
+/* Format a thread id, given a tid.  Be sure to terminate
+ * this with a null--it's going to be printed via a "%s".
+ *
+ * Note: This is a core-gdb tid, not the actual system tid.
+ *       See infttrace.c for details.
+ */
+char *
+hppa_tid_to_str( tid )
+    pid_t tid;
+{
+    static char buf[30]; /* Static because address returned */
+
+    sprintf( buf, "system thread %d\0\0\0\0", tid );
+             /* Extra NULLs for paranoia's sake */
+             
+    return buf;
+}
+
+#if !defined (GDB_NATIVE_HPUX_11)
+
+/* The following code is a substitute for the infttrace.c versions used
+   with ttrace() in HPUX 11.  */
+
+/* This value is an arbitrary integer. */
+#define PT_VERSION 123456
+
+/* This semaphore is used to coordinate the child and parent processes
+   after a fork(), and before an exec() by the child.  See
+   parent_attach_all for details.  */
+
+typedef struct {
+    int parent_channel[2];  /* Parent "talks" to [1], child "listens" to [0] */
+    int child_channel[2];   /* Child "talks" to [1], parent "listens" to [0] */
+} startup_semaphore_t;
+
+#define SEM_TALK (1)
+#define SEM_LISTEN (0)
+
+static startup_semaphore_t  startup_semaphore;
+
+extern int parent_attach_all PARAMS ((int, PTRACE_ARG3_TYPE, int));
+
+#ifdef PT_SETTRC
+/* This function causes the caller's process to be traced by its
+   parent.  This is intended to be called after GDB forks itself,
+   and before the child execs the target.
+
+   Note that HP-UX ptrace is rather funky in how this is done.
+   If the parent wants to get the initial exec event of a child,
+   it must set the ptrace event mask of the child to include execs.
+   (The child cannot do this itself.)  This must be done after the
+   child is forked, but before it execs.
+
+   To coordinate the parent and child, we implement a semaphore using
+   pipes.  After SETTRC'ing itself, the child tells the parent that
+   it is now traceable by the parent, and waits for the parent's
+   acknowledgement.  The parent can then set the child's event mask,
+   and notify the child that it can now exec.
+
+   (The acknowledgement by parent happens as a result of a call to
+   child_acknowledge_created_inferior.)  */
+
+int
+parent_attach_all (pid, addr, data)
+     int pid;
+     PTRACE_ARG3_TYPE addr;
+     int data;
+{
+  int pt_status = 0;
+
+  /* We need a memory home for a constant.  */
+  int tc_magic_child = PT_VERSION;
+  int tc_magic_parent = 0;
+
+  /* The remainder of this function is only useful for HPUX 10.0 and
+     later, as it depends upon the ability to request notification
+     of specific kinds of events by the kernel.  */
+#if defined(PT_SET_EVENT_MASK)
+
+  /* Notify the parent that we're potentially ready to exec(). */
+  write (startup_semaphore.child_channel[SEM_TALK],
+         &tc_magic_child,
+         sizeof (tc_magic_child));
+
+  /* Wait for acknowledgement from the parent. */
+  read (startup_semaphore.parent_channel[SEM_LISTEN],
+        &tc_magic_parent,
+        sizeof (tc_magic_parent));
+  if (tc_magic_child != tc_magic_parent)
+      warning ("mismatched semaphore magic");
+
+  /* Discard our copy of the semaphore. */
+  (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+  (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.child_channel[SEM_TALK]);
+#endif
+  
+  return 0;
+}
+#endif
+
+int
+hppa_require_attach (pid)
+     int pid;
+{
+  int pt_status;
+  CORE_ADDR  pc;
+  CORE_ADDR  pc_addr;
+  unsigned int regs_offset;
+
+  /* Are we already attached?  There appears to be no explicit way to
+     answer this via ptrace, so we try something which should be
+     innocuous if we are attached.  If that fails, then we assume
+     we're not attached, and so attempt to make it so. */
+
+  errno = 0;
+  regs_offset = U_REGS_OFFSET;
+  pc_addr = register_addr (PC_REGNUM, regs_offset);
+  pc = call_ptrace (PT_READ_U, pid, (PTRACE_ARG3_TYPE) pc_addr, 0);
+
+  if (errno)
+    {
+      errno = 0;
+      pt_status = call_ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0);
+
+      if (errno)
+        return -1;
+
+      /* Now we really are attached. */
+      errno = 0;
+    }
+  attach_flag = 1;
+  return pid;
+}
+
+int
+hppa_require_detach (pid, signal)
+  int pid;
+  int signal;
+{
+  errno = 0;
+  call_ptrace (PT_DETACH, pid, (PTRACE_ARG3_TYPE) 1, signal);
+  errno = 0;  /* Ignore any errors. */
+  return pid;
+}
+
+/* Since ptrace doesn't support memory page-protection events, which
+   are used to implement "hardware" watchpoints on HP-UX, these are
+   dummy versions, which perform no useful work.  */
+
+void
+hppa_enable_page_protection_events (pid)
+     int pid;
+{
+}
+
+void
+hppa_disable_page_protection_events (pid)
+     int pid;
+{
+}
+
+int
+hppa_insert_hw_watchpoint (pid, start, len, type)
+     int pid;
+     CORE_ADDR start;
+     LONGEST len;
+     int type;
+{
+  error ("Hardware watchpoints not implemented on this platform.");
+}
+
+int
+hppa_remove_hw_watchpoint (pid, start, len, type)
+     int pid;
+     CORE_ADDR start;
+     LONGEST len;
+     enum bptype type;
+{
+  error ("Hardware watchpoints not implemented on this platform.");
+}
+
+int
+hppa_can_use_hw_watchpoint (type, cnt, ot)
+     enum bptype type;
+     int cnt;
+     enum bptype ot;
+{
+  return 0;
+}
+
+int
+hppa_range_profitable_for_hw_watchpoint (pid, start, len)
+     int pid;
+     CORE_ADDR start;
+     LONGEST len;
+{
+  error ("Hardware watchpoints not implemented on this platform.");
+}
+
+char *
+hppa_pid_or_tid_to_str (id)
+     pid_t id;
+{
+  /* In the ptrace world, there are only processes. */
+  return hppa_pid_to_str (id);
+}
+
+/* This function has no meaning in a non-threaded world.  Thus, we
+   return 0 (FALSE).  See the use of "hppa_prepare_to_proceed" in
+   hppa-tdep.c. */
+
+pid_t
+hppa_switched_threads (pid)
+     pid_t pid;
+{
+  return (pid_t) 0;
+}
+
+void
+hppa_ensure_vforking_parent_remains_stopped (pid)
+     int pid;
+{
+  /* This assumes that the vforked parent is presently stopped, and
+     that the vforked child has just delivered its first exec event.
+     Calling kill() this way will cause the SIGTRAP to be delivered as
+     soon as the parent is resumed, which happens as soon as the
+     vforked child is resumed.  See wait_for_inferior for the use of
+     this function.  */
+  kill (pid, SIGTRAP);
+}
+
+int
+hppa_resume_execd_vforking_child_to_get_parent_vfork ()
+{
+  return 1;  /* Yes, the child must be resumed. */
+}
+
+void
+require_notification_of_events (pid)
+  int pid;
+{
+#if defined(PT_SET_EVENT_MASK)
+  int pt_status;
+  ptrace_event_t ptrace_events;
+
+  /* Instruct the kernel as to the set of events we wish to be
+     informed of.  (This support does not exist before HPUX 10.0.
+     We'll assume if PT_SET_EVENT_MASK has not been defined by
+     <sys/ptrace.h>, then we're being built on pre-10.0.)
+     */
+  memset (&ptrace_events, 0, sizeof (ptrace_events));
+
+  /* Note: By default, all signals are visible to us.  If we wish
+     the kernel to keep certain signals hidden from us, we do it
+     by calling sigdelset (ptrace_events.pe_signals, signal) for
+     each such signal here, before doing PT_SET_EVENT_MASK.
+     */
+  sigemptyset (&ptrace_events.pe_signals);
+
+  ptrace_events.pe_set_event = 0;
+
+  ptrace_events.pe_set_event |= PTRACE_SIGNAL;
+  ptrace_events.pe_set_event |= PTRACE_EXEC;
+  ptrace_events.pe_set_event |= PTRACE_FORK;
+  ptrace_events.pe_set_event |= PTRACE_VFORK;
+  /* ??rehrauer: Add this one when we're prepared to catch it...
+  ptrace_events.pe_set_event |= PTRACE_EXIT;
+  */
+
+  errno = 0;
+  pt_status = call_ptrace (PT_SET_EVENT_MASK,
+                      pid,
+                      (PTRACE_ARG3_TYPE) &ptrace_events,
+                      sizeof (ptrace_events));
+  if (errno)
+    perror_with_name ("ptrace");
+  if (pt_status < 0)
+    return;
+#endif
+}
+
+void
+require_notification_of_exec_events (pid)
+  int pid;
+{
+#if defined(PT_SET_EVENT_MASK)
+  int pt_status;
+  ptrace_event_t ptrace_events;
+
+  /* Instruct the kernel as to the set of events we wish to be
+     informed of.  (This support does not exist before HPUX 10.0.
+     We'll assume if PT_SET_EVENT_MASK has not been defined by
+     <sys/ptrace.h>, then we're being built on pre-10.0.)
+     */
+  memset (&ptrace_events, 0, sizeof (ptrace_events));
+
+  /* Note: By default, all signals are visible to us.  If we wish
+     the kernel to keep certain signals hidden from us, we do it
+     by calling sigdelset (ptrace_events.pe_signals, signal) for
+     each such signal here, before doing PT_SET_EVENT_MASK.
+     */
+  sigemptyset (&ptrace_events.pe_signals);
+
+  ptrace_events.pe_set_event = 0;
+
+  ptrace_events.pe_set_event |= PTRACE_EXEC;
+  /* ??rehrauer: Add this one when we're prepared to catch it...
+  ptrace_events.pe_set_event |= PTRACE_EXIT;
+  */
+
+  errno = 0;
+  pt_status = call_ptrace (PT_SET_EVENT_MASK,
+                      pid,
+                      (PTRACE_ARG3_TYPE) &ptrace_events,
+                      sizeof (ptrace_events));
+  if (errno)
+    perror_with_name ("ptrace");
+  if (pt_status < 0)
+    return;
+#endif
+}
+
+/* This function is called by the parent process, with pid being the
+   ID of the child process, after the debugger has forked.  */
+
+void
+child_acknowledge_created_inferior (pid)
+    int pid;
+{
+  /* We need a memory home for a constant.  */
+  int tc_magic_parent = PT_VERSION;
+  int tc_magic_child = 0;
+
+  /* Wait for the child to tell us that it has forked. */
+  read (startup_semaphore.child_channel[SEM_LISTEN],
+        &tc_magic_child,
+        sizeof(tc_magic_child));
+
+  /* Notify the child that it can exec.
+
+     In the infttrace.c variant of this function, we set the child's
+     event mask after the fork but before the exec.  In the ptrace
+     world, it seems we can't set the event mask until after the exec.  */
+
+  write (startup_semaphore.parent_channel[SEM_TALK],
+         &tc_magic_parent,
+         sizeof (tc_magic_parent));
+
+  /* We'd better pause a bit before trying to set the event mask,
+     though, to ensure that the exec has happened.  We don't want to
+     wait() on the child, because that'll screw up the upper layers
+     of gdb's execution control that expect to see the exec event.
+
+     After an exec, the child is no longer executing gdb code.  Hence,
+     we can't have yet another synchronization via the pipes.  We'll
+     just sleep for a second, and hope that's enough delay...  */
+
+  sleep (1);
+
+  /* Instruct the kernel as to the set of events we wish to be
+     informed of.  */
+
+  require_notification_of_exec_events (pid);
+
+  /* Discard our copy of the semaphore. */
+  (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+  (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.child_channel[SEM_TALK]);
+}
+
+void
+child_post_startup_inferior (pid)
+  int pid;
+
+{
+  require_notification_of_events (pid);
+}
+
+void
+child_post_attach (pid)
+  int pid;
+{
+  require_notification_of_events (pid);
+}
+
+int
+child_insert_fork_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch forks prior to HPUX 10.0");
+#else
+  /* Enable reporting of fork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+#endif
+}
+
+int
+child_remove_fork_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch forks prior to HPUX 10.0");
+#else
+  /* Disable reporting of fork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.  */
+  return 0;
+#endif
+}
+
+int
+child_insert_vfork_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch vforks prior to HPUX 10.0");
+#else
+  /* Enable reporting of vfork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.  */
+  return 0;
+#endif
+}
+
+int
+child_remove_vfork_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch vforks prior to HPUX 10.0");
+#else
+  /* Disable reporting of vfork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.  */
+  return 0;
+#endif
+}
+
+int
+child_has_forked (pid, childpid)
+  int pid;
+  int *  childpid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_GET_PROCESS_STATE)
+  *childpid = 0;
+  return 0;
+#else
+  int pt_status;
+  ptrace_state_t  ptrace_state;
+
+  errno = 0;
+  pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+                      pid,
+                      (PTRACE_ARG3_TYPE) &ptrace_state,
+                      sizeof (ptrace_state));
+  if (errno)
+    perror_with_name ("ptrace");
+  if (pt_status < 0)
+    return 0;
+
+  if (ptrace_state.pe_report_event & PTRACE_FORK)
+    {
+      *childpid = ptrace_state.pe_other_pid;
+      return 1;
+    }
+
+  return 0;
+#endif
+}
+
+int
+child_has_vforked (pid, childpid)
+  int pid;
+  int * childpid;
+{
+  /* This request is only available on HPUX 10.0 and later.  */
+#if !defined(PT_GET_PROCESS_STATE)
+  *childpid = 0;
+  return 0;
+
+#else
+  int pt_status;
+  ptrace_state_t  ptrace_state;
+
+  errno = 0;
+  pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+                      pid,
+                      (PTRACE_ARG3_TYPE) &ptrace_state,
+                      sizeof (ptrace_state));
+  if (errno)
+    perror_with_name ("ptrace");
+  if (pt_status < 0)
+    return 0;
+
+  if (ptrace_state.pe_report_event & PTRACE_VFORK)
+    {
+      *childpid = ptrace_state.pe_other_pid;
+      return 1;
+    }
+
+  return 0;
+#endif
+}
+
+int
+child_can_follow_vfork_prior_to_exec ()
+{
+  /* ptrace doesn't allow this. */
+  return 0;
+}
+
+int
+child_insert_exec_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.
+     */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch execs prior to HPUX 10.0");
+
+#else
+  /* Enable reporting of exec events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+#endif
+}
+
+int
+child_remove_exec_catchpoint (pid)
+  int pid;
+{
+  /* This request is only available on HPUX 10.0 and later.
+     */
+#if !defined(PT_SET_EVENT_MASK)
+  error ("Unable to catch execs prior to HPUX 10.0");
+
+#else
+  /* Disable reporting of exec events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+#endif
+}
+
+int
+child_has_execd (pid, execd_pathname)
+  int pid;
+  char **  execd_pathname;
+{
+
+  /* This request is only available on HPUX 10.0 and later.
+     */
+#if !defined(PT_GET_PROCESS_STATE)
+  *execd_pathname = NULL;
+  return 0;
+
+#else
+  int pt_status;
+  ptrace_state_t  ptrace_state;
+
+  errno = 0;
+  pt_status = call_ptrace (PT_GET_PROCESS_STATE,
+                      pid,
+                      (PTRACE_ARG3_TYPE) &ptrace_state,
+                      sizeof (ptrace_state));
+  if (errno)
+    perror_with_name ("ptrace");
+  if (pt_status < 0)
+    return 0;
+
+  if (ptrace_state.pe_report_event & PTRACE_EXEC)
+    {
+      char *  exec_file = target_pid_to_exec_file (pid);
+      *execd_pathname = savestring (exec_file, strlen (exec_file));
+      return 1;
+    }
+
+  return 0;
+#endif
+}
+
+int
+child_reported_exec_events_per_exec_call ()
+{
+  return 2;  /* ptrace reports the event twice per call. */
+}
+
+int
+child_has_syscall_event (pid, kind, syscall_id)
+     int pid;
+     enum target_waitkind *kind;
+     int *syscall_id;
+{
+  /* This request is only available on HPUX 10.30 and later, via
+     the ttrace interface.  */
+
+  *kind = TARGET_WAITKIND_SPURIOUS;
+  *syscall_id = -1;
+  return 0;
+}
+
+char *
+child_pid_to_exec_file (pid)
+    int pid;
+{
+  static char  exec_file_buffer[1024];
+  int pt_status;
+  CORE_ADDR  top_of_stack;
+  char  four_chars[4];
+  int name_index;
+  int i;
+  int saved_inferior_pid;
+  boolean  done;
+  
+#ifdef PT_GET_PROCESS_PATHNAME
+  /* As of 10.x HP-UX, there's an explicit request to get the pathname. */
+  pt_status = call_ptrace (PT_GET_PROCESS_PATHNAME,
+                           pid,
+                           (PTRACE_ARG3_TYPE) exec_file_buffer,
+                           sizeof (exec_file_buffer) - 1);
+  if (pt_status == 0)
+    return exec_file_buffer;
+#endif
+
+  /* It appears that this request is broken prior to 10.30.
+     If it fails, try a really, truly amazingly gross hack
+     that DDE uses, of pawing through the process' data
+     segment to find the pathname.  */
+
+  top_of_stack = 0x7b03a000;
+  name_index = 0;
+  done = 0;
+
+  /* On the chance that pid != inferior_pid, set inferior_pid
+     to pid, so that (grrrr!) implicit uses of inferior_pid get
+     the right id.  */
+
+  saved_inferior_pid = inferior_pid;
+  inferior_pid = pid;
+
+  /* Try to grab a null-terminated string. */
+  while (! done)
+    {
+      if (target_read_memory (top_of_stack, four_chars, 4) != 0)
+	{
+	  inferior_pid = saved_inferior_pid;
+	  return NULL;
+	}
+      for (i = 0; i < 4; i++)
+	{
+	  exec_file_buffer[name_index++] = four_chars[i];
+	  done = (four_chars[i] == '\0');
+	  if (done)
+	    break;
+	}
+      top_of_stack += 4;
+    }
+
+  if (exec_file_buffer[0] == '\0')
+    {
+      inferior_pid = saved_inferior_pid;
+      return NULL;
+    }
+
+  inferior_pid = saved_inferior_pid;
+  return exec_file_buffer;
+}
+
+void
+pre_fork_inferior ()
+{
+  int status;
+
+  status = pipe (startup_semaphore.parent_channel);
+  if (status < 0)
+    {
+      warning ("error getting parent pipe for startup semaphore");
+      return;
+    }
+
+  status = pipe (startup_semaphore.child_channel);
+  if (status < 0)
+    {
+      warning ("error getting child pipe for startup semaphore");
+      return;
+    }
+}
+
+
+/* Check to see if the given thread is alive.
+
+   This is a no-op, as ptrace doesn't support threads, so we just
+   return "TRUE".  */
+
+int
+child_thread_alive (pid)
+     int pid;
+{
+   return 1;
+}
+
+#endif /* ! GDB_NATIVE_HPUX_11 */
diff --git a/gdb/hppam3-nat.c b/gdb/hppam3-nat.c
new file mode 100644
index 0000000..95a66b0
--- /dev/null
+++ b/gdb/hppam3-nat.c
@@ -0,0 +1,141 @@
+/* Low level interface to HP800 running mach 4.0.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "floatformat.h"
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+#include <target.h>
+
+/*
+ * Fetch inferiors registers for gdb.
+ * REGNO specifies which (as gdb views it) register, -1 for all.
+ */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = TRACE_FLAVOR_SIZE;
+  int index;
+  
+  if (! MACH_PORT_VALID (current_thread))
+    error ("fetch inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  ret = thread_get_state (current_thread,
+			  TRACE_FLAVOR,
+			  state,
+			  &stateCnt);
+
+  if (ret != KERN_SUCCESS)
+    warning ("fetch_inferior_registers: %s ",
+	     mach_error_string (ret));
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	supply_register (index,(void*)&state[index]);
+    }
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
+
+/* Store our register values back into the inferior.
+ * If REGNO is -1, do this for all registers.
+ * Otherwise, REGNO specifies which register
+ *
+ * On mach3 all registers are always saved in one call.
+ */
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = TRACE_FLAVOR_SIZE;
+  register int index;
+
+  if (! MACH_PORT_VALID (current_thread))
+    error ("store inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  /* Fetch the state of the current thread */
+  ret = thread_get_state (current_thread,
+			  TRACE_FLAVOR,
+			  state,
+			  &stateCnt);
+
+   if (ret != KERN_SUCCESS) 
+    {
+      warning ("store_inferior_registers (get): %s",
+	       mach_error_string (ret));
+      if (must_suspend_thread)
+	setup_thread (current_thread, 0);
+      return;
+    }
+
+
+  /* move gdb's registers to thread's state
+   *
+   * Since we save all registers anyway, save the ones
+   * that gdb thinks are valid (e.g. ignore the regno
+   * parameter)
+   */
+  if (regno > 0 && regno < NUM_REGS ) 
+    {
+      memcpy(&state[regno], &registers[REGISTER_BYTE (regno)], 
+	     REGISTER_RAW_SIZE(regno));
+    }
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	memcpy(&state[index], &registers[REGISTER_BYTE (index)], 
+	       REGISTER_RAW_SIZE(index));
+/* 	state[index] = registers[REGISTER_BYTE (index)];*/
+
+    }
+  
+  /* Write gdb's current view of register to the thread
+   */
+  ret = thread_set_state (current_thread,
+			  TRACE_FLAVOR,
+			  state,
+			  TRACE_FLAVOR_SIZE);
+  
+  if (ret != KERN_SUCCESS)
+    warning ("store_inferior_registers (set): %s",
+	     mach_error_string (ret));
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
diff --git a/gdb/hpread.c b/gdb/hpread.c
new file mode 100644
index 0000000..0b464ec
--- /dev/null
+++ b/gdb/hpread.c
@@ -0,0 +1,2050 @@
+/* Read hp debug symbols and convert to internal format, for GDB.
+   Copyright 1993, 1996 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Written by the Center for Software Science at the University of Utah
+   and by Cygnus Support.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "hp-symtab.h"
+#include "syms.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "complaints.h"
+#include "gdb-stabs.h"
+#include "gdbtypes.h"
+#include "demangle.h"
+
+/* Private information attached to an objfile which we use to find
+   and internalize the HP C debug symbols within that objfile.  */
+
+struct hpread_symfile_info
+{
+  /* The contents of each of the debug sections (there are 4 of them).  */
+  char *gntt;
+  char *lntt;
+  char *slt;
+  char *vt;
+
+  /* We keep the size of the $VT$ section for range checking.  */
+  unsigned int vt_size;
+
+  /* Some routines still need to know the number of symbols in the
+     main debug sections ($LNTT$ and $GNTT$). */
+  unsigned int lntt_symcount;
+  unsigned int gntt_symcount;
+
+  /* To keep track of all the types we've processed.  */
+  struct type **type_vector;
+  int type_vector_length;
+
+  /* Keeps track of the beginning of a range of source lines.  */
+  sltpointer sl_index;
+
+  /* Some state variables we'll need.  */
+  int within_function;
+
+  /* Keep track of the current function's address.  We may need to look
+     up something based on this address.  */
+  unsigned int current_function_value;
+};
+
+/* Accessor macros to get at the fields.  */
+#define HPUX_SYMFILE_INFO(o) \
+  ((struct hpread_symfile_info *)((o)->sym_private))
+#define GNTT(o)                 (HPUX_SYMFILE_INFO(o)->gntt)
+#define LNTT(o)                 (HPUX_SYMFILE_INFO(o)->lntt)
+#define SLT(o)                  (HPUX_SYMFILE_INFO(o)->slt)
+#define VT(o)                   (HPUX_SYMFILE_INFO(o)->vt)
+#define VT_SIZE(o)              (HPUX_SYMFILE_INFO(o)->vt_size)
+#define LNTT_SYMCOUNT(o)        (HPUX_SYMFILE_INFO(o)->lntt_symcount)
+#define GNTT_SYMCOUNT(o)        (HPUX_SYMFILE_INFO(o)->gntt_symcount)
+#define TYPE_VECTOR(o)          (HPUX_SYMFILE_INFO(o)->type_vector)
+#define TYPE_VECTOR_LENGTH(o)   (HPUX_SYMFILE_INFO(o)->type_vector_length)
+#define SL_INDEX(o)             (HPUX_SYMFILE_INFO(o)->sl_index)
+#define WITHIN_FUNCTION(o)      (HPUX_SYMFILE_INFO(o)->within_function)
+#define CURRENT_FUNCTION_VALUE(o) (HPUX_SYMFILE_INFO(o)->current_function_value)
+
+/* Given the native debug symbol SYM, set NAMEP to the name associated
+   with the debug symbol.  Note we may be called with a debug symbol which
+   has no associated name, in that case we return an empty string.
+
+   Also note we "know" that the name for any symbol is always in the
+   same place.  Hence we don't have to conditionalize on the symbol type.  */
+#define SET_NAMESTRING(SYM, NAMEP, OBJFILE) \
+  if (! hpread_has_name ((SYM)->dblock.kind)) \
+    *NAMEP = ""; \
+  else if (((unsigned)(SYM)->dsfile.name) >= VT_SIZE (OBJFILE)) \
+    { \
+      complain (&string_table_offset_complaint, (char *) symnum); \
+      *NAMEP = ""; \
+    } \
+  else \
+    *NAMEP = (SYM)->dsfile.name + VT (OBJFILE)
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct symloc
+{
+  /* The offset within the file symbol table of first local symbol for
+     this file.  */
+
+  int ldsymoff;
+
+  /* Length (in bytes) of the section of the symbol table devoted to
+     this file's symbols (actually, the section bracketed may contain
+     more than just this file's symbols).  If ldsymlen is 0, the only
+     reason for this thing's existence is the dependency list.
+     Nothing else will happen when it is read in.  */
+
+  int ldsymlen;
+};
+
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+
+/* FIXME: Shouldn't this stuff be in a .h file somewhere?  */
+/* Nonzero means give verbose info on gdb action.  */
+extern int info_verbose;
+
+/* Complaints about the symbols we have encountered.  */
+extern struct complaint string_table_offset_complaint;
+extern struct complaint lbrac_unmatched_complaint;
+extern struct complaint lbrac_mismatch_complaint;
+
+
+void hpread_symfile_init  PARAMS ((struct objfile *));
+
+static struct type *
+hpread_read_array_type PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_alloc_type
+  PARAMS ((dnttpointer, struct objfile *));
+
+static struct type **hpread_lookup_type
+  PARAMS ((dnttpointer, struct objfile *));
+
+static struct type *hpread_read_enum_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_read_set_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_read_subrange_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type *hpread_read_struct_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+void hpread_build_psymtabs
+  PARAMS ((struct objfile *, struct section_offsets *, int));
+
+void hpread_symfile_finish PARAMS ((struct objfile *));
+
+static struct partial_symtab *hpread_start_psymtab
+  PARAMS ((struct objfile *, struct section_offsets *, char *, CORE_ADDR, int,
+	   struct partial_symbol **, struct partial_symbol **));
+
+static struct partial_symtab *hpread_end_psymtab
+  PARAMS ((struct partial_symtab *, char **, int, int, CORE_ADDR,
+	   struct partial_symtab **, int));
+
+static struct symtab *hpread_expand_symtab
+  PARAMS ((struct objfile *, int, int, CORE_ADDR, int,
+	   struct section_offsets *, char *));
+
+static void hpread_process_one_debug_symbol
+  PARAMS ((union dnttentry *, char *, struct section_offsets *,
+	   struct objfile *, CORE_ADDR, int, char *, int));
+
+static sltpointer hpread_record_lines
+  PARAMS ((struct subfile *, sltpointer, sltpointer,
+	   struct objfile *, CORE_ADDR));
+
+static struct type *hpread_read_function_type
+  PARAMS ((dnttpointer, union dnttentry *, struct objfile *));
+
+static struct type * hpread_type_lookup
+  PARAMS ((dnttpointer, struct objfile *));
+
+static unsigned long hpread_get_depth
+  PARAMS ((sltpointer, struct objfile *));
+
+static unsigned long hpread_get_line
+  PARAMS ((sltpointer, struct objfile *));
+
+static CORE_ADDR hpread_get_location
+  PARAMS ((sltpointer, struct objfile *));
+
+static int hpread_type_translate PARAMS ((dnttpointer));
+static unsigned long hpread_get_textlow PARAMS ((int, int, struct objfile *));
+static union dnttentry *hpread_get_gntt PARAMS ((int, struct objfile *));
+static union dnttentry *hpread_get_lntt PARAMS ((int, struct objfile *));
+static union sltentry *hpread_get_slt PARAMS ((int, struct objfile *));
+static void hpread_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+static void hpread_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+static int hpread_has_name PARAMS ((enum dntt_entry_type));
+
+
+/* Initialization for reading native HP C debug symbols from OBJFILE.
+
+   It's only purpose in life is to set up the symbol reader's private
+   per-objfile data structures, and read in the raw contents of the debug
+   sections (attaching pointers to the debug info into the private data
+   structures).
+
+   Since BFD doesn't know how to read debug symbols in a format-independent
+   way (and may never do so...), we have to do it ourselves.  Note we may
+   be called on a file without native HP C debugging symbols.
+   FIXME, there should be a cleaner peephole into the BFD environment here.  */
+
+void
+hpread_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  asection *vt_section, *slt_section, *lntt_section, *gntt_section;
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_private = (PTR)
+    xmmalloc (objfile->md, sizeof (struct hpread_symfile_info));
+  memset (objfile->sym_private, 0, sizeof (struct hpread_symfile_info));
+
+  /* We haven't read in any types yet.  */
+  TYPE_VECTOR (objfile) = 0;
+
+  /* Read in data from the $GNTT$ subspace.  */
+  gntt_section = bfd_get_section_by_name (objfile->obfd, "$GNTT$");
+  if (!gntt_section)
+    return;
+
+  GNTT (objfile)
+    = obstack_alloc (&objfile->symbol_obstack,
+		     bfd_section_size (objfile->obfd, gntt_section));
+
+  bfd_get_section_contents (objfile->obfd, gntt_section, GNTT (objfile),
+			    0, bfd_section_size (objfile->obfd, gntt_section));
+
+  GNTT_SYMCOUNT (objfile)
+    = bfd_section_size (objfile->obfd, gntt_section)
+			/ sizeof (struct dntt_type_block);
+
+  /* Read in data from the $LNTT$ subspace.   Also keep track of the number
+     of LNTT symbols.  */
+  lntt_section = bfd_get_section_by_name (objfile->obfd, "$LNTT$");
+  if (!lntt_section)
+    return;
+
+  LNTT (objfile)
+    = obstack_alloc (&objfile->symbol_obstack,
+		     bfd_section_size (objfile->obfd, lntt_section));
+
+  bfd_get_section_contents (objfile->obfd, lntt_section, LNTT (objfile),
+			    0, bfd_section_size (objfile->obfd, lntt_section));
+
+  LNTT_SYMCOUNT (objfile)
+    = bfd_section_size (objfile->obfd, lntt_section)
+			/ sizeof (struct dntt_type_block);
+
+  /* Read in data from the $SLT$ subspace.  $SLT$ contains information
+     on source line numbers.  */
+  slt_section = bfd_get_section_by_name (objfile->obfd, "$SLT$");
+  if (!slt_section)
+    return;
+
+  SLT (objfile) =
+    obstack_alloc (&objfile->symbol_obstack,
+		   bfd_section_size (objfile->obfd, slt_section));
+
+  bfd_get_section_contents (objfile->obfd, slt_section, SLT (objfile),
+			    0, bfd_section_size (objfile->obfd, slt_section));
+
+  /* Read in data from the $VT$ subspace.  $VT$ contains things like
+     names and constants.  Keep track of the number of symbols in the VT.  */
+  vt_section = bfd_get_section_by_name (objfile->obfd, "$VT$");
+  if (!vt_section)
+    return;
+
+  VT_SIZE (objfile) = bfd_section_size (objfile->obfd, vt_section);
+
+  VT (objfile) =
+    (char *) obstack_alloc (&objfile->symbol_obstack,
+			    VT_SIZE (objfile));
+
+  bfd_get_section_contents (objfile->obfd, vt_section, VT (objfile),
+			    0, VT_SIZE (objfile));
+}
+
+/* Scan and build partial symbols for a symbol file.
+
+   The minimal symbol table (either SOM or HP a.out) has already been
+   read in; all we need to do is setup partial symbols based on the
+   native debugging information.
+
+   We assume hpread_symfile_init has been called to initialize the
+   symbol reader's private data structures.
+
+   SECTION_OFFSETS contains offsets relative to which the symbols in the
+   various sections are (depending where the sections were actually loaded).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).  */
+
+void
+hpread_build_psymtabs (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  char *namestring;
+  int past_first_source_file = 0;
+  struct cleanup *old_chain;
+
+  int hp_symnum, symcount, i;
+
+  union dnttentry *dn_bufp;
+  unsigned long valu;
+  char *p;
+  int texthigh = 0;
+  int have_name = 0;
+
+  /* Current partial symtab */
+  struct partial_symtab *pst;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+
+  /* Just in case the stabs reader left turds lying around.  */
+  free_pending_blocks ();
+  make_cleanup (really_free_pendings, 0);
+
+  pst = (struct partial_symtab *) 0;
+
+  /* We shouldn't use alloca, instead use malloc/free.  Doing so avoids
+     a number of problems with cross compilation and creating useless holes
+     in the stack when we have to allocate new entries.  FIXME.  */
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  old_chain = make_cleanup (free_objfile, objfile);
+
+  last_source_file = 0;
+
+  /* Make two passes, one ofr the GNTT symbols, the other for the
+     LNTT symbols.  */
+  for (i = 0; i < 1; i++)
+    {
+      int within_function = 0;
+
+      if (i)
+	symcount = GNTT_SYMCOUNT (objfile);
+      else
+	symcount = LNTT_SYMCOUNT (objfile);
+
+      for (hp_symnum = 0; hp_symnum < symcount; hp_symnum++)
+	{
+	  QUIT;
+	  if (i)
+	    dn_bufp = hpread_get_gntt (hp_symnum, objfile);
+	  else
+	    dn_bufp = hpread_get_lntt (hp_symnum, objfile);
+
+	  if (dn_bufp->dblock.extension)
+	    continue;
+
+	  /* Only handle things which are necessary for minimal symbols.
+	     everything else is ignored.  */
+	  switch (dn_bufp->dblock.kind)
+	    {
+	    case DNTT_TYPE_SRCFILE:
+	      {
+		/* A source file of some kind.  Note this may simply
+		   be an included file.  */
+		SET_NAMESTRING (dn_bufp, &namestring, objfile);
+
+		/* Check if this is the source file we are already working
+		   with.  */
+		if (pst && !strcmp (namestring, pst->filename))
+		  continue;
+
+		/* Check if this is an include file, if so check if we have
+		   already seen it.  Add it to the include list */
+		p = strrchr (namestring, '.');
+		if (!strcmp (p, ".h"))
+		  {
+		    int j, found;
+
+		    found = 0;
+		    for (j = 0; j < includes_used; j++)
+		      if (!strcmp (namestring, psymtab_include_list[j]))
+			{
+			  found = 1;
+			  break;
+			}
+		    if (found)
+		      continue;
+
+		    /* Add it to the list of includes seen so far and
+		       allocate more include space if necessary.  */
+		    psymtab_include_list[includes_used++] = namestring;
+		    if (includes_used >= includes_allocated)
+		      {
+			char **orig = psymtab_include_list;
+
+			psymtab_include_list = (char **)
+			  alloca ((includes_allocated *= 2) *
+				  sizeof (char *));
+			memcpy ((PTR) psymtab_include_list, (PTR) orig,
+				includes_used * sizeof (char *));
+		      }
+		    continue;
+		  }
+
+
+		if (pst)
+		  {
+		    if (!have_name)
+		      {
+			pst->filename = (char *)
+			  obstack_alloc (&pst->objfile->psymbol_obstack,
+					 strlen (namestring) + 1);
+			strcpy (pst->filename, namestring);
+			have_name = 1;
+			continue;
+		      }
+		    continue;
+		  }
+
+		/* This is a bonafide new source file.
+		   End the current partial symtab and start a new one.  */
+
+		if (pst && past_first_source_file)
+		  {
+		    hpread_end_psymtab (pst, psymtab_include_list,
+					includes_used,
+					(hp_symnum
+					 * sizeof (struct dntt_type_block)),
+					texthigh,
+					dependency_list, dependencies_used);
+		    pst = (struct partial_symtab *) 0;
+		    includes_used = 0;
+		    dependencies_used = 0;
+		  }
+		else
+		  past_first_source_file = 1;
+
+		valu = hpread_get_textlow (i, hp_symnum, objfile);
+		valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		pst = hpread_start_psymtab (objfile, section_offsets,
+					    namestring, valu,
+					    (hp_symnum
+					     * sizeof (struct dntt_type_block)),
+					    objfile->global_psymbols.next,
+					    objfile->static_psymbols.next);
+		texthigh = valu;
+		have_name = 1;
+		continue;
+	      }
+
+	    case DNTT_TYPE_MODULE:
+	      /* A source file.  It's still unclear to me what the
+		 real difference between a DNTT_TYPE_SRCFILE and DNTT_TYPE_MODULE
+		 is supposed to be.  */
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      valu = hpread_get_textlow (i, hp_symnum, objfile);
+	      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      if (!pst)
+		{
+		  pst = hpread_start_psymtab (objfile, section_offsets,
+					      namestring, valu,
+					      (hp_symnum
+					       * sizeof (struct dntt_type_block)),
+					      objfile->global_psymbols.next,
+					      objfile->static_psymbols.next);
+		  texthigh = valu;
+		  have_name = 0;
+		}
+	      continue;
+	    case DNTT_TYPE_FUNCTION:
+	    case DNTT_TYPE_ENTRY:
+	      /* The beginning of a function.  DNTT_TYPE_ENTRY may also denote
+		 a secondary entry point.  */
+	      valu = dn_bufp->dfunc.hiaddr + ANOFFSET (section_offsets,
+						       SECT_OFF_TEXT);
+	      if (valu > texthigh)
+		texthigh = valu;
+	      valu = dn_bufp->dfunc.lowaddr +
+		ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      add_psymbol_to_list (namestring, strlen (namestring),
+				   VAR_NAMESPACE, LOC_BLOCK,
+				   &objfile->static_psymbols, valu,
+				   0, language_unknown, objfile);
+	      within_function = 1;
+	      continue;
+	    case DNTT_TYPE_BEGIN:
+	    case DNTT_TYPE_END:
+	      /* Scope block begin/end.  We only care about function
+		 and file blocks right now.  */
+	      if (dn_bufp->dend.endkind == DNTT_TYPE_MODULE)
+		{
+		  hpread_end_psymtab (pst, psymtab_include_list, includes_used,
+				      (hp_symnum
+				       * sizeof (struct dntt_type_block)),
+				      texthigh,
+				      dependency_list, dependencies_used);
+		  pst = (struct partial_symtab *) 0;
+		  includes_used = 0;
+		  dependencies_used = 0;
+		  have_name = 0;
+		}
+	      if (dn_bufp->dend.endkind == DNTT_TYPE_FUNCTION)
+		within_function = 0;
+	      continue;
+	    case DNTT_TYPE_SVAR:
+	    case DNTT_TYPE_DVAR:
+	    case DNTT_TYPE_TYPEDEF:
+	    case DNTT_TYPE_TAGDEF:
+	      {
+		/* Variables, typedefs an the like.  */
+		enum address_class storage;
+		namespace_enum namespace;
+
+		/* Don't add locals to the partial symbol table.  */
+		if (within_function
+		    && (dn_bufp->dblock.kind == DNTT_TYPE_SVAR
+			|| dn_bufp->dblock.kind == DNTT_TYPE_DVAR))
+		  continue;
+
+		/* TAGDEFs go into the structure namespace.  */
+		if (dn_bufp->dblock.kind == DNTT_TYPE_TAGDEF)
+		  namespace = STRUCT_NAMESPACE;
+		else
+		  namespace = VAR_NAMESPACE;
+
+		/* What kind of "storage" does this use?  */
+		if (dn_bufp->dblock.kind == DNTT_TYPE_SVAR)
+		  storage = LOC_STATIC;
+		else if (dn_bufp->dblock.kind == DNTT_TYPE_DVAR
+			 && dn_bufp->ddvar.regvar)
+		  storage = LOC_REGISTER;
+		else if (dn_bufp->dblock.kind == DNTT_TYPE_DVAR)
+		  storage = LOC_LOCAL;
+		else
+		  storage = LOC_UNDEF;
+
+		SET_NAMESTRING (dn_bufp, &namestring, objfile);
+		if (!pst)
+		  {
+		    pst = hpread_start_psymtab (objfile, section_offsets,
+						"globals", 0,
+						(hp_symnum
+						 * sizeof (struct dntt_type_block)),
+						objfile->global_psymbols.next,
+						objfile->static_psymbols.next);
+		  }
+		if (dn_bufp->dsvar.global)
+		  {
+		    add_psymbol_to_list (namestring, strlen (namestring),
+					 namespace, storage,
+					 &objfile->global_psymbols,
+					 dn_bufp->dsvar.location,
+					 0, language_unknown, objfile);
+		  }
+		else
+		  {
+		    add_psymbol_to_list (namestring, strlen (namestring),
+					 namespace, storage,
+					 &objfile->static_psymbols,
+					 dn_bufp->dsvar.location,
+					 0, language_unknown, objfile);
+		  }
+		continue;
+	      }
+	    case DNTT_TYPE_MEMENUM:
+	    case DNTT_TYPE_CONST:
+	      /* Constants and members of enumerated types.  */
+	      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+	      if (!pst)
+		{
+		  pst = hpread_start_psymtab (objfile, section_offsets,
+					      "globals", 0,
+					      (hp_symnum 
+					       * sizeof (struct dntt_type_block)),
+					      objfile->global_psymbols.next,
+					      objfile->static_psymbols.next);
+		}
+	      add_psymbol_to_list (namestring, strlen (namestring),
+				   VAR_NAMESPACE, LOC_CONST,
+				   &objfile->static_psymbols, 0,
+				   0, language_unknown, objfile);
+	      continue;
+	    default:
+	      continue;
+	    }
+	}
+    }
+
+  /* End any pending partial symbol table.  */
+  if (pst)
+    {
+      hpread_end_psymtab (pst, psymtab_include_list, includes_used,
+			  hp_symnum * sizeof (struct dntt_type_block),
+			  0, dependency_list, dependencies_used);
+    }
+
+  discard_cleanups (old_chain);
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+void
+hpread_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile->sym_private != NULL)
+    {
+      mfree (objfile->md, objfile->sym_private);
+    }
+}
+
+
+/* The remaining functions are all for internal use only.  */
+
+/* Various small functions to get entries in the debug symbol sections.  */
+
+static union dnttentry *
+hpread_get_lntt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union dnttentry *)
+    &(LNTT (objfile)[(index * sizeof (struct dntt_type_block))]);
+}
+
+static union dnttentry *
+hpread_get_gntt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union dnttentry *)
+    &(GNTT (objfile)[(index * sizeof (struct dntt_type_block))]);
+}
+
+static union sltentry *
+hpread_get_slt (index, objfile)
+     int index;
+     struct objfile *objfile;
+{
+  return (union sltentry *)&(SLT (objfile)[index * sizeof (union sltentry)]);
+}
+
+/* Get the low address associated with some symbol (typically the start
+   of a particular source file or module).  Since that information is not
+   stored as part of the DNTT_TYPE_MODULE or DNTT_TYPE_SRCFILE symbol we must infer it from
+   the existance of DNTT_TYPE_FUNCTION symbols.  */
+
+static unsigned long
+hpread_get_textlow (global, index, objfile)
+     int global;
+     int index;
+     struct objfile *objfile;
+{
+  union dnttentry *dn_bufp;
+  struct minimal_symbol *msymbol;
+
+  /* Look for a DNTT_TYPE_FUNCTION symbol.  */
+  do
+    {
+      if (global)
+	dn_bufp = hpread_get_gntt (index++, objfile);
+      else
+	dn_bufp = hpread_get_lntt (index++, objfile);
+    } while (dn_bufp->dblock.kind != DNTT_TYPE_FUNCTION
+	     && dn_bufp->dblock.kind != DNTT_TYPE_END);
+
+  /* Avoid going past a DNTT_TYPE_END when looking for a DNTT_TYPE_FUNCTION.  This
+     might happen when a sourcefile has no functions.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_END)
+    return 0;
+
+  /* The minimal symbols are typically more accurate for some reason.  */
+  msymbol = lookup_minimal_symbol (dn_bufp->dfunc.name + VT (objfile), NULL,
+				   objfile);
+  if (msymbol)
+    return SYMBOL_VALUE_ADDRESS (msymbol);
+  else
+    return dn_bufp->dfunc.lowaddr;
+}
+
+/* Get the nesting depth for the source line identified by INDEX.  */
+
+static unsigned long
+hpread_get_depth (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+
+  sl_bufp = hpread_get_slt (index, objfile);
+  return sl_bufp->sspec.backptr.dnttp.index;
+}
+
+/* Get the source line number the the line identified by INDEX.  */
+
+static unsigned long
+hpread_get_line (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+
+  sl_bufp = hpread_get_slt (index, objfile);
+  return sl_bufp->snorm.line;
+}
+
+static CORE_ADDR
+hpread_get_location (index, objfile)
+     sltpointer index;
+     struct objfile *objfile;
+{
+  union sltentry *sl_bufp;
+  int i;
+
+  /* code location of special sltentrys is determined from context */
+  sl_bufp = hpread_get_slt (index, objfile);
+
+  if (sl_bufp->snorm.sltdesc == SLT_END)
+    {
+      /* find previous normal sltentry and get address */
+      for (i = 0; ((sl_bufp->snorm.sltdesc != SLT_NORMAL) &&
+		   (sl_bufp->snorm.sltdesc != SLT_EXIT)); i++)
+	sl_bufp = hpread_get_slt (index - i, objfile);
+      return sl_bufp->snorm.address;
+    }
+
+  /* find next normal sltentry and get address */
+  for (i = 0; ((sl_bufp->snorm.sltdesc != SLT_NORMAL) &&
+	       (sl_bufp->snorm.sltdesc != SLT_EXIT)); i++)
+    sl_bufp = hpread_get_slt (index + i, objfile);
+  return sl_bufp->snorm.address;
+}
+
+
+/* Return 1 if an HP debug symbol of type KIND has a name associated with
+   it, else return 0.  */
+
+static int
+hpread_has_name (kind)
+     enum dntt_entry_type kind;
+{
+  switch (kind)
+    {
+    case DNTT_TYPE_SRCFILE:
+    case DNTT_TYPE_MODULE:
+    case DNTT_TYPE_FUNCTION:
+    case DNTT_TYPE_ENTRY:
+    case DNTT_TYPE_IMPORT:
+    case DNTT_TYPE_LABEL:
+    case DNTT_TYPE_FPARAM:
+    case DNTT_TYPE_SVAR:
+    case DNTT_TYPE_DVAR:
+    case DNTT_TYPE_CONST:
+    case DNTT_TYPE_TYPEDEF:
+    case DNTT_TYPE_TAGDEF:
+    case DNTT_TYPE_MEMENUM:
+    case DNTT_TYPE_FIELD:
+    case DNTT_TYPE_SA:
+      return 1;
+
+    case DNTT_TYPE_BEGIN:
+    case DNTT_TYPE_END:
+    case DNTT_TYPE_WITH:
+    case DNTT_TYPE_COMMON:
+    case DNTT_TYPE_POINTER:
+    case DNTT_TYPE_ENUM:
+    case DNTT_TYPE_SET:
+    case DNTT_TYPE_SUBRANGE:
+    case DNTT_TYPE_ARRAY:
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+    case DNTT_TYPE_VARIANT:
+    case DNTT_TYPE_FILE:
+    case DNTT_TYPE_FUNCTYPE:
+    case DNTT_TYPE_COBSTRUCT:
+    case DNTT_TYPE_XREF:
+    case DNTT_TYPE_MACRO:
+    default:
+      return 0;
+    }
+}
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+static struct partial_symtab *
+hpread_start_psymtab (objfile, section_offsets,
+		  filename, textlow, ldsymoff, global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     CORE_ADDR textlow;
+     int ldsymoff;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  struct partial_symtab *result =
+  start_psymtab_common (objfile, section_offsets,
+			filename, textlow, global_syms, static_syms);
+
+  result->read_symtab_private = (char *)
+    obstack_alloc (&objfile->psymbol_obstack, sizeof (struct symloc));
+  LDSYMOFF (result) = ldsymoff;
+  result->read_symtab = hpread_psymtab_to_symtab;
+
+  return result;
+}
+
+
+/* Close off the current usage of PST.  
+   Returns PST or NULL if the partial symtab was empty and thrown away.
+
+   FIXME:  List variables and peculiarities of same.  */
+
+static struct partial_symtab *
+hpread_end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
+	     capping_text, dependency_list, number_dependencies)
+     struct partial_symtab *pst;
+     char **include_list;
+     int num_includes;
+     int capping_symbol_offset;
+     CORE_ADDR capping_text;
+     struct partial_symtab **dependency_list;
+     int number_dependencies;
+{
+  int i;
+  struct objfile *objfile = pst -> objfile;
+
+  if (capping_symbol_offset != -1)
+      LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
+  pst->texthigh = capping_text;
+
+  pst->n_global_syms =
+    objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+  pst->n_static_syms =
+    objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+  pst->number_of_dependencies = number_dependencies;
+  if (number_dependencies)
+    {
+      pst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       number_dependencies * sizeof (struct partial_symtab *));
+      memcpy (pst->dependencies, dependency_list,
+	     number_dependencies * sizeof (struct partial_symtab *));
+    }
+  else
+    pst->dependencies = 0;
+
+  for (i = 0; i < num_includes; i++)
+    {
+      struct partial_symtab *subpst =
+	allocate_psymtab (include_list[i], objfile);
+
+      subpst->section_offsets = pst->section_offsets;
+      subpst->read_symtab_private =
+	  (char *) obstack_alloc (&objfile->psymbol_obstack,
+				  sizeof (struct symloc));
+      LDSYMOFF(subpst) =
+	LDSYMLEN(subpst) =
+	  subpst->textlow =
+	    subpst->texthigh = 0;
+
+      /* We could save slight bits of space by only making one of these,
+	 shared by the entire set of include files.  FIXME-someday.  */
+      subpst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       sizeof (struct partial_symtab *));
+      subpst->dependencies[0] = pst;
+      subpst->number_of_dependencies = 1;
+
+      subpst->globals_offset =
+	subpst->n_global_syms =
+	  subpst->statics_offset =
+	    subpst->n_static_syms = 0;
+
+      subpst->readin = 0;
+      subpst->symtab = 0;
+      subpst->read_symtab = pst->read_symtab;
+    }
+
+  sort_pst_symbols (pst);
+
+  /* If there is already a psymtab or symtab for a file of this name, remove it.
+     (If there is a symtab, more drastic things also happen.)
+     This happens in VxWorks.  */
+  free_named_symtabs (pst->filename);
+
+  if (num_includes == 0
+      && number_dependencies == 0
+      && pst->n_global_syms == 0
+      && pst->n_static_syms == 0)
+    {
+      /* Throw away this psymtab, it's empty.  We can't deallocate it, since
+	 it is on the obstack, but we can forget to chain it on the list.  */
+      /* Empty psymtabs happen as a result of header files which don't have
+	 any symbols in them.  There can be a lot of them.  But this check
+	 is wrong, in that a psymtab with N_SLINE entries but nothing else
+	 is not empty, but we don't realize that.  Fixing that without slowing
+	 things down might be tricky.  */
+
+      discard_psymtab (pst);
+
+      /* Indicate that psymtab was thrown away.  */
+      pst = (struct partial_symtab *)NULL;
+    }
+  return pst;
+}
+
+/* Do the dirty work of reading in the full symbol from a partial symbol
+   table.  */
+
+static void
+hpread_psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *old_chain;
+  int i;
+
+  /* Get out quick if passed junk.  */
+  if (!pst)
+    return;
+
+  /* Complain if we've already read in this symbol table.  */
+  if (pst->readin)
+    {
+      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  /* Read in all partial symtabs on which this one is dependent */
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files that need to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...", pst->dependencies[i]->filename);
+	    wrap_here ("");	/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	hpread_psymtab_to_symtab_1 (pst->dependencies[i]);
+      }
+
+  /* If it's real...  */
+  if (LDSYMLEN (pst))
+    {
+      /* Init stuff necessary for reading in symbols */
+      buildsym_init ();
+      old_chain = make_cleanup (really_free_pendings, 0);
+
+      pst->symtab =
+	hpread_expand_symtab (pst->objfile, LDSYMOFF (pst), LDSYMLEN (pst),
+			      pst->textlow, pst->texthigh - pst->textlow,
+			      pst->section_offsets, pst->filename);
+      sort_symtab_syms (pst->symtab);
+
+      do_cleanups (old_chain);
+    }
+
+  pst->readin = 1;
+}
+
+/* Read in all of the symbols for a given psymtab for real.
+   Be verbose about it if the user wants that.  */
+
+static void
+hpread_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  /* Get out quick if given junk.  */
+  if (!pst)
+    return;
+
+  /* Sanity check.  */
+  if (pst->readin)
+    {
+      fprintf (stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  if (LDSYMLEN (pst) || pst->number_of_dependencies)
+    {
+      /* Print the message now, before reading the string table,
+         to avoid disconcerting pauses.  */
+      if (info_verbose)
+	{
+	  printf_filtered ("Reading in symbols for %s...", pst->filename);
+	  gdb_flush (gdb_stdout);
+	}
+
+      hpread_psymtab_to_symtab_1 (pst);
+
+      /* Match with global symbols.  This only needs to be done once,
+         after all of the symtabs and dependencies have been read in.   */
+      scan_file_globals (pst->objfile);
+
+      /* Finish up the debug error message.  */
+      if (info_verbose)
+	printf_filtered ("done.\n");
+    }
+}
+/* Read in a defined section of a specific object file's symbols.
+
+   DESC is the file descriptor for the file, positioned at the
+   beginning of the symtab
+   SYM_OFFSET is the offset within the file of
+   the beginning of the symbols we want to read
+   SYM_SIZE is the size of the symbol info to read in.
+   TEXT_OFFSET is the beginning of the text segment we are reading symbols for
+   TEXT_SIZE is the size of the text segment read in.
+   SECTION_OFFSETS are the relocation offsets which get added to each symbol. */
+
+static struct symtab *
+hpread_expand_symtab (objfile, sym_offset, sym_size, text_offset, text_size,
+		      section_offsets, filename)
+     struct objfile *objfile;
+     int sym_offset;
+     int sym_size;
+     CORE_ADDR text_offset;
+     int text_size;
+     struct section_offsets *section_offsets;
+     char *filename;
+{
+  char *namestring;
+  union dnttentry *dn_bufp;
+  unsigned max_symnum;
+
+  int sym_index = sym_offset / sizeof (struct dntt_type_block);
+
+  current_objfile = objfile;
+  subfile_stack = 0;
+
+  last_source_file = 0;
+
+  dn_bufp = hpread_get_lntt (sym_index, objfile);
+  if (!((dn_bufp->dblock.kind == (unsigned char) DNTT_TYPE_SRCFILE) ||
+	(dn_bufp->dblock.kind == (unsigned char) DNTT_TYPE_MODULE)))
+    {
+      start_symtab ("globals", NULL, 0);
+      record_debugformat ("HP");
+    }
+
+  max_symnum = sym_size / sizeof (struct dntt_type_block);
+
+  /* Read in and process each debug symbol within the specified range.  */
+  for (symnum = 0;
+       symnum < max_symnum;
+       symnum++)
+    {
+      QUIT;			/* Allow this to be interruptable */
+      dn_bufp = hpread_get_lntt (sym_index + symnum, objfile);
+
+      if (dn_bufp->dblock.extension)
+	continue;
+
+      /* Yow!  We call SET_NAMESTRING on things without names!  */
+      SET_NAMESTRING (dn_bufp, &namestring, objfile);
+
+      hpread_process_one_debug_symbol (dn_bufp, namestring, section_offsets,
+				       objfile, text_offset, text_size,
+				       filename, symnum + sym_index);
+    }
+
+  current_objfile = NULL;
+
+  return end_symtab (text_offset + text_size, objfile, 0);
+}
+
+
+/* Convert basic types from HP debug format into GDB internal format.  */
+
+static int
+hpread_type_translate (typep)
+     dnttpointer typep;
+{
+  if (!typep.dntti.immediate)
+    abort ();
+
+  switch (typep.dntti.type)
+    {
+    case HP_TYPE_BOOLEAN:
+    case HP_TYPE_BOOLEAN_S300_COMPAT:
+    case HP_TYPE_BOOLEAN_VAX_COMPAT:
+      return FT_BOOLEAN;
+      /* Ugh.  No way to distinguish between signed and unsigned chars.  */
+    case HP_TYPE_CHAR:
+    case HP_TYPE_WIDE_CHAR:
+      return FT_CHAR;
+    case HP_TYPE_INT:
+      if (typep.dntti.bitlength <= 8)
+	return FT_CHAR;
+      if (typep.dntti.bitlength <= 16)
+	return FT_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_INTEGER;
+      return FT_LONG_LONG;
+    case HP_TYPE_LONG:
+      return FT_LONG;
+    case HP_TYPE_UNSIGNED_LONG:
+      if (typep.dntti.bitlength <= 8)
+	return FT_UNSIGNED_CHAR;
+      if (typep.dntti.bitlength <= 16)
+	return FT_UNSIGNED_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_UNSIGNED_LONG;
+      return FT_UNSIGNED_LONG_LONG;
+    case HP_TYPE_UNSIGNED_INT:
+      if (typep.dntti.bitlength <= 8)
+	return FT_UNSIGNED_CHAR;
+      if (typep.dntti.bitlength <= 16)
+	return FT_UNSIGNED_SHORT;
+      if (typep.dntti.bitlength <= 32)
+	return FT_UNSIGNED_INTEGER;
+      return FT_UNSIGNED_LONG_LONG;
+    case HP_TYPE_REAL:
+    case HP_TYPE_REAL_3000:
+    case HP_TYPE_DOUBLE:
+      if (typep.dntti.bitlength == 64)
+	return FT_DBL_PREC_FLOAT;
+      if (typep.dntti.bitlength == 128)
+	return FT_EXT_PREC_FLOAT;
+      return FT_FLOAT;
+    case HP_TYPE_COMPLEX:
+    case HP_TYPE_COMPLEXS3000:
+      if (typep.dntti.bitlength == 128)
+	return FT_DBL_PREC_COMPLEX;
+      if (typep.dntti.bitlength == 192)
+	return FT_EXT_PREC_COMPLEX;
+      return FT_COMPLEX;
+    case HP_TYPE_STRING200:
+    case HP_TYPE_LONGSTRING200:
+    case HP_TYPE_FTN_STRING_SPEC:
+    case HP_TYPE_MOD_STRING_SPEC:
+    case HP_TYPE_MOD_STRING_3000:
+    case HP_TYPE_FTN_STRING_S300_COMPAT:
+    case HP_TYPE_FTN_STRING_VAX_COMPAT:
+      return FT_STRING;
+    default:
+      abort ();
+    }
+}
+
+/* Return the type associated with the index found in HP_TYPE.  */
+
+static struct type **
+hpread_lookup_type (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  unsigned old_len;
+  int index = hp_type.dnttp.index;
+
+  if (hp_type.dntti.immediate)
+    return NULL;
+
+  if (index < LNTT_SYMCOUNT (objfile))
+    {
+      if (index >= TYPE_VECTOR_LENGTH (objfile))
+	{
+	  old_len = TYPE_VECTOR_LENGTH (objfile);
+	  if (old_len == 0)
+	    {
+	      TYPE_VECTOR_LENGTH (objfile) = 100;
+	      TYPE_VECTOR (objfile) = (struct type **)
+		xmmalloc (objfile -> md,
+			  TYPE_VECTOR_LENGTH (objfile) * sizeof (struct type *));
+	    }
+	  while (index >= TYPE_VECTOR_LENGTH (objfile))
+	    TYPE_VECTOR_LENGTH (objfile) *= 2;
+	  TYPE_VECTOR (objfile) = (struct type **)
+	    xmrealloc (objfile -> md,
+		       (char *) TYPE_VECTOR (objfile),
+		      (TYPE_VECTOR_LENGTH (objfile) * sizeof (struct type *)));
+	  memset (&TYPE_VECTOR (objfile)[old_len], 0,
+		  (TYPE_VECTOR_LENGTH (objfile) - old_len) *
+		  sizeof (struct type *));
+	}
+      return &TYPE_VECTOR (objfile)[index];
+    }
+  else
+    return NULL;
+}
+
+/* Possibly allocate a GDB internal type so we can internalize HP_TYPE.
+   Note we'll just return the address of a GDB internal type if we already
+   have it lying around.  */
+
+static struct type *
+hpread_alloc_type (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  struct type **type_addr;
+
+  type_addr = hpread_lookup_type (hp_type, objfile);
+  if (*type_addr == 0)
+    *type_addr = alloc_type (objfile);
+
+  TYPE_CPLUS_SPECIFIC (*type_addr)
+    = (struct cplus_struct_type *) &cplus_struct_default;
+  return *type_addr;
+}
+
+/* Read a native enumerated type and return it in GDB internal form.  */
+
+static struct type *
+hpread_read_enum_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+  struct pending **symlist, *osyms, *syms;
+  int o_nsyms, nsyms = 0;
+  dnttpointer mem;
+  union dnttentry *memp;
+  char *name;
+  long n;
+  struct symbol *sym;
+
+  type = hpread_alloc_type (hp_type, objfile);
+  TYPE_LENGTH (type) = 4;
+
+  symlist = &file_symbols;
+  osyms = *symlist;
+  o_nsyms = osyms ? osyms->nsyms : 0;
+
+  /* Get a name for each member and add it to our list of members.  */
+  mem = dn_bufp->denum.firstmem;
+  while (mem.dnttp.extension && mem.word != DNTTNIL)
+    {
+      memp = hpread_get_lntt (mem.dnttp.index, objfile);
+
+      name = VT (objfile) + memp->dmember.name;
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = obsavestring (name, strlen (name), 
+					&objfile->symbol_obstack);
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_VALUE (sym) = memp->dmember.value;
+      add_symbol_to_list (sym, symlist);
+      nsyms++;
+      mem = memp->dmember.nextmem;
+    }
+
+  /* Now that we know more about the enum, fill in more info.  */
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the members and put them into the type.
+     The symbols can be found in the symlist that we put them on
+     to cause them to be defined.  osyms contains the old value
+     of that symlist; everything up to there was defined by us.
+
+     Note that we preserve the order of the enum constants, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+  for (syms = *symlist, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+      if (syms == osyms)
+	j = o_nsyms;
+      for (; j < syms->nsyms; j++, n++)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  SYMBOL_TYPE (xsym) = type;
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = SYMBOL_VALUE (xsym);
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+      if (syms == osyms)
+	break;
+    }
+
+  return type;
+}
+
+/* Read and internalize a native function debug symbol.  */
+
+static struct type *
+hpread_read_function_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type, *type1;
+  struct pending **symlist, *osyms, *syms;
+  int o_nsyms, nsyms = 0;
+  dnttpointer param;
+  union dnttentry *paramp;
+  char *name;
+  long n;
+  struct symbol *sym;
+
+  param = dn_bufp->dfunc.firstparam;
+
+  /* See if we've already read in this type.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_FUNC)
+    return type;
+
+  /* Nope, so read it in and store it away.  */
+  type1 = lookup_function_type (hpread_type_lookup (dn_bufp->dfunc.retval,
+						    objfile));
+  memcpy ((char *) type, (char *) type1, sizeof (struct type));
+
+  symlist = &local_symbols;
+  osyms = *symlist;
+  o_nsyms = osyms ? osyms->nsyms : 0;
+
+  /* Now examine each parameter noting its type, location, and a
+     wealth of other information.  */
+  while (param.word && param.word != DNTTNIL)
+    {
+      paramp = hpread_get_lntt (param.dnttp.index, objfile);
+      nsyms++;
+      param = paramp->dfparam.nextparam;
+
+      /* Get the name.  */
+      name = VT (objfile) + paramp->dfparam.name;
+      sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					     sizeof (struct symbol));
+      (void) memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = obsavestring (name, strlen (name),
+					&objfile->symbol_obstack);
+
+      /* Figure out where it lives.  */
+      if (paramp->dfparam.regparam)
+	SYMBOL_CLASS (sym) = LOC_REGPARM;
+      else if (paramp->dfparam.indirect)
+	SYMBOL_CLASS (sym) = LOC_REF_ARG;
+      else
+	SYMBOL_CLASS (sym) = LOC_ARG;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (paramp->dfparam.copyparam)
+	{
+	  SYMBOL_VALUE (sym) = paramp->dfparam.location ;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+	  SYMBOL_VALUE (sym)
+	    += HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+	  /* This is likely a pass-by-invisible reference parameter,
+	     Hack on the symbol class to make GDB happy.  */
+	  SYMBOL_CLASS (sym) = LOC_REGPARM_ADDR;
+	}
+      else
+	SYMBOL_VALUE (sym) = paramp->dfparam.location;
+
+      /* Get its type.  */
+      SYMBOL_TYPE (sym) = hpread_type_lookup (paramp->dfparam.type, objfile);
+
+      /* Add it to the list.  */
+      add_symbol_to_list (sym, symlist);
+    }
+
+  /* Note how many parameters we found.  */
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack,
+		   sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the values and put them into the type.
+     The symbols can be found in the symlist that we put them on
+     to cause them to be defined.  osyms contains the old value
+     of that symlist; everything up to there was defined by us.  */
+  /* Note that we preserve the order of the parameters, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+  for (syms = *symlist, n = 0; syms; syms = syms->next)
+    {
+      int j = 0;
+      if (syms == osyms)
+	j = o_nsyms;
+      for (; j < syms->nsyms; j++, n++)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_TYPE (type, n) = SYMBOL_TYPE (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = n;
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+      if (syms == osyms)
+	break;
+    }
+  return type;
+}
+
+/* Read in and internalize a structure definition.  */
+
+static struct type *
+hpread_read_struct_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct nextfield
+    {
+      struct nextfield *next;
+      struct field field;
+    };
+
+  struct type *type;
+  struct nextfield *list = 0;
+  struct nextfield *new;
+  int n, nfields = 0;
+  dnttpointer field;
+  union dnttentry *fieldp;
+
+  /* Is it something we've already dealt with?  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if ((TYPE_CODE (type) == TYPE_CODE_STRUCT) ||
+      (TYPE_CODE (type) == TYPE_CODE_UNION))
+      return type;
+
+  /* Get the basic type correct.  */
+  if (dn_bufp->dblock.kind == DNTT_TYPE_STRUCT)
+    {
+      TYPE_CODE (type) = TYPE_CODE_STRUCT;
+      TYPE_LENGTH (type) = dn_bufp->dstruct.bitlength / 8;
+    }
+  else if (dn_bufp->dblock.kind == DNTT_TYPE_UNION)
+    {
+      TYPE_CODE (type) = TYPE_CODE_UNION;
+      TYPE_LENGTH (type) = dn_bufp->dunion.bitlength / 8;
+    }
+  else
+    return type;
+
+
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+
+  /* Read in and internalize all the fields.  */
+  field = dn_bufp->dstruct.firstfield;
+  while (field.word != DNTTNIL && field.dnttp.extension)
+    {
+      fieldp = hpread_get_lntt (field.dnttp.index, objfile);
+
+      /* Get space to record the next field's data.  */
+      new = (struct nextfield *) alloca (sizeof (struct nextfield));
+      new->next = list;
+      list = new;
+
+      list->field.name = VT (objfile) + fieldp->dfield.name;
+      FIELD_BITPOS (list->field) = fieldp->dfield.bitoffset;
+      if (fieldp->dfield.bitlength % 8)
+	FIELD_BITSIZE (list->field) = fieldp->dfield.bitlength;
+      else
+	FIELD_BITSIZE (list->field) = 0;
+      nfields++;
+      field = fieldp->dfield.nextfield;
+      FIELD_TYPE (list->field) = hpread_type_lookup (fieldp->dfield.type,
+						     objfile);
+    }
+
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field) * nfields);
+
+  /* Copy the saved-up fields into the field vector.  */
+  for (n = nfields; list; list = list->next)
+    {
+      n -= 1;
+      TYPE_FIELD (type, n) = list->field;
+    }
+  return type;
+}
+
+/* Read in and internalize a set debug symbol.  */
+
+static struct type *
+hpread_read_set_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+
+  /* See if it's something we've already deal with.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_SET)
+    return type;
+
+  /* Nope.  Fill in the appropriate fields.  */
+  TYPE_CODE (type) = TYPE_CODE_SET;
+  TYPE_LENGTH (type) = dn_bufp->dset.bitlength / 8;
+  TYPE_NFIELDS (type) = 0;
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->dset.subtype,
+						objfile);
+  return type;
+}
+
+/* Read in and internalize an array debug symbol.  */
+
+static struct type *
+hpread_read_array_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+  union dnttentry save;
+  save = *dn_bufp;
+
+  /* Why no check here?  Because it kept us from properly determining
+     the size of the array!  */
+  type = hpread_alloc_type (hp_type, objfile);
+
+  TYPE_CODE (type) = TYPE_CODE_ARRAY;
+
+  /* values are not normalized.  */
+  if (!((dn_bufp->darray.arrayisbytes && dn_bufp->darray.elemisbytes)
+	|| (!dn_bufp->darray.arrayisbytes && !dn_bufp->darray.elemisbytes)))
+    abort ();
+  else if (dn_bufp->darray.arraylength == 0x7fffffff)
+    {
+      /* The HP debug format represents char foo[]; as an array with
+	 length 0x7fffffff.  Internally GDB wants to represent this
+	 as an array of length zero.  */
+     TYPE_LENGTH (type) = 0;
+    }
+  else
+    TYPE_LENGTH (type) = dn_bufp->darray.arraylength / 8;
+
+  TYPE_NFIELDS (type) = 1;
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->darray.elemtype,
+						objfile);
+  dn_bufp = &save;
+  TYPE_FIELDS (type) = (struct field *)
+    obstack_alloc (&objfile->type_obstack, sizeof (struct field));
+  TYPE_FIELD_TYPE (type, 0) = hpread_type_lookup (dn_bufp->darray.indextype,
+						  objfile);
+  return type;
+}
+
+/* Read in and internalize a subrange debug symbol.  */
+static struct type *
+hpread_read_subrange_type (hp_type, dn_bufp, objfile)
+     dnttpointer hp_type;
+     union dnttentry *dn_bufp;
+     struct objfile *objfile;
+{
+  struct type *type;
+
+  /* Is it something we've already dealt with.  */
+  type = hpread_alloc_type (hp_type, objfile);
+  if (TYPE_CODE (type) == TYPE_CODE_RANGE)
+    return type;
+
+  /* Nope, internalize it.  */
+  TYPE_CODE (type) = TYPE_CODE_RANGE;
+  TYPE_LENGTH (type) = dn_bufp->dsubr.bitlength / 8;
+  TYPE_NFIELDS (type) = 2;
+  TYPE_FIELDS (type)
+    = (struct field *) obstack_alloc (&objfile->type_obstack,
+				      2 * sizeof (struct field));
+
+  if (dn_bufp->dsubr.dyn_low)
+    TYPE_FIELD_BITPOS (type, 0) = 0;
+  else
+    TYPE_FIELD_BITPOS (type, 0) = dn_bufp->dsubr.lowbound;
+
+  if (dn_bufp->dsubr.dyn_high)
+    TYPE_FIELD_BITPOS (type, 1) = -1;
+  else
+    TYPE_FIELD_BITPOS (type, 1) = dn_bufp->dsubr.highbound;
+  TYPE_TARGET_TYPE (type) = hpread_type_lookup (dn_bufp->dsubr.subtype,
+						objfile);
+  return type;
+}
+
+static struct type *
+hpread_type_lookup (hp_type, objfile)
+     dnttpointer hp_type;
+     struct objfile *objfile;
+{
+  union dnttentry *dn_bufp;
+
+  /* First see if it's a simple builtin type.  */
+  if (hp_type.dntti.immediate)
+    return lookup_fundamental_type (objfile, hpread_type_translate (hp_type));
+
+  /* Not a builtin type.  We'll have to read it in.  */
+  if (hp_type.dnttp.index < LNTT_SYMCOUNT (objfile))
+    dn_bufp = hpread_get_lntt (hp_type.dnttp.index, objfile);
+  else
+    return lookup_fundamental_type (objfile, FT_VOID);
+
+  switch (dn_bufp->dblock.kind)
+    {
+    case DNTT_TYPE_SRCFILE:
+    case DNTT_TYPE_MODULE:
+    case DNTT_TYPE_FUNCTION:
+    case DNTT_TYPE_ENTRY:
+    case DNTT_TYPE_BEGIN:
+    case DNTT_TYPE_END:
+    case DNTT_TYPE_IMPORT:
+    case DNTT_TYPE_LABEL:
+    case DNTT_TYPE_WITH:
+    case DNTT_TYPE_COMMON:
+    case DNTT_TYPE_FPARAM:
+    case DNTT_TYPE_SVAR:
+    case DNTT_TYPE_DVAR:
+    case DNTT_TYPE_CONST:
+      /* Opps.  Something went very wrong.  */
+      return lookup_fundamental_type (objfile, FT_VOID);
+
+    case DNTT_TYPE_TYPEDEF:
+      {
+	struct type *structtype = hpread_type_lookup (dn_bufp->dtype.type,
+						      objfile);
+	char *suffix;
+	suffix = VT (objfile) + dn_bufp->dtype.name;
+
+	TYPE_CPLUS_SPECIFIC (structtype)
+	  = (struct cplus_struct_type *) &cplus_struct_default;
+ 	TYPE_NAME (structtype) = suffix;
+	return structtype;
+      }
+
+    case DNTT_TYPE_TAGDEF:
+      {
+	/* Just a little different from above.  We have to tack on
+	   an identifier of some kind (struct, union, enum, etc).  */
+	struct type *structtype = hpread_type_lookup (dn_bufp->dtype.type,
+						      objfile);
+	char *prefix, *suffix;
+	suffix = VT (objfile) + dn_bufp->dtype.name;
+
+	/* Lookup the next type in the list.  It should be a structure,
+	   union, or enum type.  We will need to attach that to our name.  */
+	if (dn_bufp->dtype.type.dnttp.index < LNTT_SYMCOUNT (objfile))
+	  dn_bufp = hpread_get_lntt (dn_bufp->dtype.type.dnttp.index, objfile);
+	else
+	  abort ();
+
+	if (dn_bufp->dblock.kind == DNTT_TYPE_STRUCT)
+	  prefix = "struct ";
+	else if (dn_bufp->dblock.kind == DNTT_TYPE_UNION)
+	  prefix = "union ";
+	else
+	  prefix = "enum ";
+
+	/* Build the correct name.  */
+	structtype->name
+	  = (char *) obstack_alloc (&objfile->type_obstack,
+				    strlen (prefix) + strlen (suffix) + 1);
+	TYPE_NAME (structtype) = strcpy (TYPE_NAME (structtype), prefix);
+	TYPE_NAME (structtype) = strcat (TYPE_NAME (structtype), suffix);
+	TYPE_TAG_NAME (structtype) = suffix;
+
+	TYPE_CPLUS_SPECIFIC (structtype)
+	  = (struct cplus_struct_type *) &cplus_struct_default;
+
+	return structtype;
+      }
+    case DNTT_TYPE_POINTER:
+      return lookup_pointer_type (hpread_type_lookup (dn_bufp->dptr.pointsto,
+						      objfile));
+    case DNTT_TYPE_ENUM:
+      return hpread_read_enum_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_MEMENUM:
+      return lookup_fundamental_type (objfile, FT_VOID);
+    case DNTT_TYPE_SET:
+      return hpread_read_set_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_SUBRANGE:
+      return hpread_read_subrange_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_ARRAY:
+      return hpread_read_array_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+      return hpread_read_struct_type (hp_type, dn_bufp, objfile);
+    case DNTT_TYPE_FIELD:
+      return hpread_type_lookup (dn_bufp->dfield.type, objfile);
+    case DNTT_TYPE_VARIANT:
+    case DNTT_TYPE_FILE:
+      return lookup_fundamental_type (objfile, FT_VOID);
+    case DNTT_TYPE_FUNCTYPE:
+      return lookup_function_type (hpread_type_lookup (dn_bufp->dfunctype.retval,
+						       objfile));
+    case DNTT_TYPE_COBSTRUCT:
+    case DNTT_TYPE_XREF:
+    case DNTT_TYPE_SA:
+    case DNTT_TYPE_MACRO:
+    default:
+      return lookup_fundamental_type (objfile, FT_VOID);
+    }
+}
+
+static sltpointer
+hpread_record_lines (subfile, s_idx, e_idx, objfile, offset)
+     struct subfile *subfile;
+     sltpointer s_idx, e_idx;
+     struct objfile *objfile;
+     CORE_ADDR offset;
+{
+  union sltentry *sl_bufp;
+
+  while (s_idx <= e_idx)
+    {
+      sl_bufp = hpread_get_slt (s_idx, objfile);
+      /* Only record "normal" entries in the SLT.  */
+      if (sl_bufp->snorm.sltdesc == SLT_NORMAL
+	  || sl_bufp->snorm.sltdesc == SLT_EXIT)
+	record_line (subfile, sl_bufp->snorm.line,
+		     sl_bufp->snorm.address + offset);
+      s_idx++;
+    }
+  return e_idx;
+}
+
+/* Internalize one native debug symbol.  */
+
+static void
+hpread_process_one_debug_symbol (dn_bufp, name, section_offsets, objfile,
+				 text_offset, text_size, filename, index)
+     union dnttentry *dn_bufp;
+     char *name;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+     CORE_ADDR text_offset;
+     int text_size;
+     char *filename;
+     int index;
+{
+  unsigned long desc;
+  int type;
+  CORE_ADDR valu;
+  int offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
+  union dnttentry *dn_temp;
+  dnttpointer hp_type;
+  struct symbol *sym;
+  struct context_stack *new;
+
+  /* Allocate one GDB debug symbol and fill in some default values.  */
+  sym = (struct symbol *) obstack_alloc (&objfile->symbol_obstack,
+					 sizeof (struct symbol));
+  memset (sym, 0, sizeof (struct symbol));
+  SYMBOL_NAME (sym) = obsavestring (name, strlen (name), &objfile->symbol_obstack);
+  SYMBOL_LANGUAGE (sym) = language_auto;
+  SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+  SYMBOL_LINE (sym) = 0;
+  SYMBOL_VALUE (sym) = 0;
+  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+
+  hp_type.dnttp.extension = 1;
+  hp_type.dnttp.immediate = 0;
+  hp_type.dnttp.global = 0;
+  hp_type.dnttp.index = index;
+
+  type = dn_bufp->dblock.kind;
+
+  switch (type)
+    {
+    case DNTT_TYPE_SRCFILE:
+      /* This type of symbol indicates from which source file or include file
+         the following data comes. If there are no modules it also may
+         indicate the start of a new source file, in which case we must
+         finish the symbol table of the previous source file
+         (if any) and start accumulating a new symbol table.  */
+
+      valu = text_offset;
+      if (!last_source_file)
+	{
+	  start_symtab (name, NULL, valu);
+	  record_debugformat ("HP");
+	  SL_INDEX (objfile) = dn_bufp->dsfile.address;
+	}
+      else
+	{
+	  SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						    SL_INDEX (objfile),
+						    dn_bufp->dsfile.address,
+						    objfile, offset);
+	}
+      start_subfile (name, NULL);
+      break;
+      
+    case DNTT_TYPE_MODULE:
+      /* No need to do anything with these DNTT_TYPE_MODULE symbols anymore.  */
+      break;
+
+    case DNTT_TYPE_FUNCTION:
+    case DNTT_TYPE_ENTRY:
+      /* A function or secondary entry point.  */
+      valu = dn_bufp->dfunc.lowaddr + offset;
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dfunc.address,
+						objfile, offset);
+      
+      WITHIN_FUNCTION (objfile) = 1;
+      CURRENT_FUNCTION_VALUE (objfile) = valu;
+
+      /* Stack must be empty now.  */
+      if (context_stack_depth != 0)
+	complain (&lbrac_unmatched_complaint, (char *) symnum);
+      new = push_context (0, valu);
+
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_TYPE (sym) = hpread_read_function_type (hp_type, dn_bufp, objfile);
+      if (dn_bufp->dfunc.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      new->name = sym;
+
+      /* Search forward to the next scope beginning.  */
+      while (dn_bufp->dblock.kind != DNTT_TYPE_BEGIN)
+	{
+	  dn_bufp = hpread_get_lntt (++index, objfile);
+	  if (dn_bufp->dblock.extension)
+	    continue;
+	}
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dbegin.address,
+						objfile, offset);
+      SYMBOL_LINE (sym) = hpread_get_line (dn_bufp->dbegin.address, objfile);
+      record_line (current_subfile, SYMBOL_LINE (sym), valu);
+      break;
+
+    case DNTT_TYPE_BEGIN:
+      /* Begin a new scope.  */
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dbegin.address,
+						objfile, offset);
+      valu = hpread_get_location (dn_bufp->dbegin.address, objfile);
+      valu += offset;		/* Relocate for dynamic loading */
+      desc = hpread_get_depth (dn_bufp->dbegin.address, objfile);
+      new = push_context (desc, valu);
+      break;
+
+    case DNTT_TYPE_END:
+      /* End a scope.  */
+      SL_INDEX (objfile) = hpread_record_lines (current_subfile,
+						SL_INDEX (objfile),
+						dn_bufp->dend.address + 1,
+						objfile, offset);
+      switch (dn_bufp->dend.endkind)
+	{
+	case DNTT_TYPE_MODULE:
+	  /* Ending a module ends the symbol table for that module.  */
+	  valu = text_offset + text_size + offset;
+	  (void) end_symtab (valu, objfile, 0);
+	  break;
+
+	case DNTT_TYPE_FUNCTION:
+	  /* Ending a function, well, ends the function's scope.  */
+	  dn_temp = hpread_get_lntt (dn_bufp->dend.beginscope.dnttp.index,
+				     objfile);
+	  valu = dn_temp->dfunc.hiaddr + offset;
+	  new = pop_context ();
+	  /* Make a block for the local symbols within.  */
+	  finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, valu, objfile);
+	  WITHIN_FUNCTION (objfile) = 0;
+	  break;
+	case DNTT_TYPE_BEGIN:
+	  /* Just ending a local scope.  */
+	  valu = hpread_get_location (dn_bufp->dend.address, objfile);
+	  /* Why in the hell is this needed?  */
+	  valu += offset + 9;	/* Relocate for dynamic loading */
+	  new = pop_context ();
+	  desc = dn_bufp->dend.beginscope.dnttp.index;
+	  if (desc != new->depth)
+	    complain (&lbrac_mismatch_complaint, (char *) symnum);
+	  /* Make a block for the local symbols within.  */
+	  finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, valu, objfile);
+	  local_symbols = new->locals;
+	  break;
+	}
+      break;
+    case DNTT_TYPE_LABEL:
+      SYMBOL_NAMESPACE (sym) = LABEL_NAMESPACE;
+      break;
+    case DNTT_TYPE_FPARAM:
+      /* Function parameters.  */
+      if (dn_bufp->dfparam.regparam)
+	SYMBOL_CLASS (sym) = LOC_REGISTER;
+      else
+	SYMBOL_CLASS (sym) = LOC_LOCAL;
+      if (dn_bufp->dfparam.copyparam)
+	{
+	  SYMBOL_VALUE (sym) = dn_bufp->dfparam.location;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+	  SYMBOL_VALUE (sym)
+	    += HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+	}
+      else
+	SYMBOL_VALUE (sym) = dn_bufp->dfparam.location;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dfparam.type, objfile);
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+    case DNTT_TYPE_SVAR:
+      /* Static variables.  */
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      SYMBOL_VALUE_ADDRESS (sym) = dn_bufp->dsvar.location;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dsvar.type, objfile);
+      if (dn_bufp->dsvar.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_DVAR:
+      /* Dynamic variables.  */
+      if (dn_bufp->ddvar.regvar)
+	SYMBOL_CLASS (sym) = LOC_REGISTER;
+      else
+	SYMBOL_CLASS (sym) = LOC_LOCAL;
+      SYMBOL_VALUE (sym) = dn_bufp->ddvar.location;
+#ifdef HPREAD_ADJUST_STACK_ADDRESS
+      SYMBOL_VALUE (sym)
+	+= HPREAD_ADJUST_STACK_ADDRESS (CURRENT_FUNCTION_VALUE (objfile));
+#endif
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->ddvar.type, objfile);
+      if (dn_bufp->ddvar.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_CONST:
+      /* A constant (pascal?).  */
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_VALUE (sym) = dn_bufp->dconst.location;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dconst.type, objfile);
+      if (dn_bufp->dconst.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_TYPEDEF:
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dtype.type, objfile);
+      if (dn_bufp->dtype.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_TAGDEF:
+      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+      SYMBOL_TYPE (sym) = hpread_type_lookup (dn_bufp->dtype.type, objfile);
+      TYPE_NAME (sym->type) = SYMBOL_NAME (sym);
+      TYPE_TAG_NAME (sym->type) = SYMBOL_NAME (sym);
+      if (dn_bufp->dtype.global)
+	add_symbol_to_list (sym, &global_symbols);
+      else if (WITHIN_FUNCTION (objfile))
+	add_symbol_to_list (sym, &local_symbols);
+      else
+	add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_POINTER:
+      SYMBOL_TYPE (sym) = lookup_pointer_type (hpread_type_lookup
+					       (dn_bufp->dptr.pointsto,
+						objfile));
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_ENUM:
+      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+      SYMBOL_TYPE (sym) = hpread_read_enum_type (hp_type, dn_bufp, objfile);
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_MEMENUM:
+      break;
+    case DNTT_TYPE_SET:
+      SYMBOL_TYPE (sym) = hpread_read_set_type (hp_type, dn_bufp, objfile);
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_SUBRANGE:
+      SYMBOL_TYPE (sym) = hpread_read_subrange_type (hp_type, dn_bufp,
+						     objfile);
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_ARRAY:
+      SYMBOL_TYPE (sym) = hpread_read_array_type (hp_type, dn_bufp, objfile);
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    case DNTT_TYPE_STRUCT:
+    case DNTT_TYPE_UNION:
+      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+      SYMBOL_TYPE (sym) = hpread_read_struct_type (hp_type, dn_bufp, objfile);
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    default:
+      break;
+    }
+}
diff --git a/gdb/hpread.h b/gdb/hpread.h
new file mode 100644
index 0000000..7864dd6
--- /dev/null
+++ b/gdb/hpread.h
@@ -0,0 +1,150 @@
+/* hpread.h
+ * Common include file for:
+ *   hp_symtab_read.c
+ *   hp_psymtab_read.c
+ */
+
+/* Copyright 1993, 1996 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+   Written by the Center for Software Science at the University of Utah
+   and by Cygnus Support.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "hp-symtab.h"
+#include "syms.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "complaints.h"
+#include "gdb-stabs.h"
+#include "gdbtypes.h"
+#include "demangle.h"
+
+/* Private information attached to an objfile which we use to find
+   and internalize the HP C debug symbols within that objfile.  */
+
+struct hpread_symfile_info
+{
+  /* The contents of each of the debug sections (there are 4 of them).  */
+  char *gntt;
+  char *lntt;
+  char *slt;
+  char *vt;
+
+  /* We keep the size of the $VT$ section for range checking.  */
+  unsigned int vt_size;
+
+  /* Some routines still need to know the number of symbols in the
+     main debug sections ($LNTT$ and $GNTT$). */
+  unsigned int lntt_symcount;
+  unsigned int gntt_symcount;
+
+  /* To keep track of all the types we've processed.  */
+  struct type **type_vector;
+  int type_vector_length;
+
+  /* Keeps track of the beginning of a range of source lines.  */
+  sltpointer sl_index;
+
+  /* Some state variables we'll need.  */
+  int within_function;
+
+  /* Keep track of the current function's address.  We may need to look
+     up something based on this address.  */
+  unsigned int current_function_value;
+};
+
+/* Accessor macros to get at the fields.  */
+#define HPUX_SYMFILE_INFO(o) \
+  ((struct hpread_symfile_info *)((o)->sym_private))
+#define GNTT(o)                 (HPUX_SYMFILE_INFO(o)->gntt)
+#define LNTT(o)                 (HPUX_SYMFILE_INFO(o)->lntt)
+#define SLT(o)                  (HPUX_SYMFILE_INFO(o)->slt)
+#define VT(o)                   (HPUX_SYMFILE_INFO(o)->vt)
+#define VT_SIZE(o)              (HPUX_SYMFILE_INFO(o)->vt_size)
+#define LNTT_SYMCOUNT(o)        (HPUX_SYMFILE_INFO(o)->lntt_symcount)
+#define GNTT_SYMCOUNT(o)        (HPUX_SYMFILE_INFO(o)->gntt_symcount)
+#define TYPE_VECTOR(o)          (HPUX_SYMFILE_INFO(o)->type_vector)
+#define TYPE_VECTOR_LENGTH(o)   (HPUX_SYMFILE_INFO(o)->type_vector_length)
+#define SL_INDEX(o)             (HPUX_SYMFILE_INFO(o)->sl_index)
+#define WITHIN_FUNCTION(o)      (HPUX_SYMFILE_INFO(o)->within_function)
+#define CURRENT_FUNCTION_VALUE(o) (HPUX_SYMFILE_INFO(o)->current_function_value)
+
+/* Given the native debug symbol SYM, set NAMEP to the name associated
+   with the debug symbol.  Note we may be called with a debug symbol which
+   has no associated name, in that case we return an empty string.
+
+   Also note we "know" that the name for any symbol is always in the
+   same place.  Hence we don't have to conditionalize on the symbol type.  */
+#define SET_NAMESTRING(SYM, NAMEP, OBJFILE) \
+  if (! hpread_has_name ((SYM)->dblock.kind)) \
+    *NAMEP = ""; \
+  else if (((unsigned)(SYM)->dsfile.name) >= VT_SIZE (OBJFILE)) \
+    { \
+      complain (&string_table_offset_complaint, (char *) symnum); \
+      *NAMEP = ""; \
+    } \
+  else \
+    *NAMEP = (SYM)->dsfile.name + VT (OBJFILE)
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct symloc
+{
+  /* The offset within the file symbol table of first local symbol for
+     this file.  */
+
+  int ldsymoff;
+
+  /* Length (in bytes) of the section of the symbol table devoted to
+     this file's symbols (actually, the section bracketed may contain
+     more than just this file's symbols).  If ldsymlen is 0, the only
+     reason for this thing's existence is the dependency list.
+     Nothing else will happen when it is read in.  */
+
+  int ldsymlen;
+};
+
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
+#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
+
+/* FIXME: Shouldn't this stuff be in a .h file somewhere?  */
+/* Nonzero means give verbose info on gdb action.  */
+extern int info_verbose;
+
+/* Complaints about the symbols we have encountered.  */
+extern struct complaint string_table_offset_complaint;
+extern struct complaint lbrac_unmatched_complaint;
+extern struct complaint lbrac_mismatch_complaint;
+
+extern union sltentry *hpread_get_slt
+  PARAMS ((int, struct objfile *));
+
+extern union dnttentry *hpread_get_lntt
+  PARAMS ((int, struct objfile *));
+
+int hpread_has_name
+  PARAMS ((enum dntt_entry_type));
+
+/* end of hpread.h */
diff --git a/gdb/hpux-thread.c b/gdb/hpux-thread.c
new file mode 100644
index 0000000..36421f3
--- /dev/null
+++ b/gdb/hpux-thread.c
@@ -0,0 +1,641 @@
+/* Low level interface for debugging HPUX/DCE threads for GDB, the GNU debugger.
+   Copyright 1996, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module implements a sort of half target that sits between the
+   machine-independent parts of GDB and the ptrace interface (infptrace.c) to
+   provide access to the HPUX user-mode thread implementation.
+
+   HPUX threads are true user-mode threads, which are invoked via the cma_*
+   and pthread_* (DCE and Posix respectivly) interfaces.  These are mostly
+   implemented in user-space, with all thread context kept in various
+   structures that live in the user's heap.  For the most part, the kernel has
+   no knowlege of these threads.
+
+   */
+
+#include "defs.h"
+
+#define _CMA_NOWRAPPERS_
+
+#include <cma_tcb_defs.h>
+#include <cma_deb_core.h>
+#include "gdbthread.h"
+#include "target.h"
+#include "inferior.h"
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include "gdbcore.h"
+
+extern int child_suppress_run;
+extern struct target_ops child_ops; /* target vector for inftarg.c */
+
+extern void _initialize_hpux_thread PARAMS ((void));
+
+struct string_map
+{
+  int num;
+  char *str;
+};
+
+static int hpux_thread_active = 0;
+
+static int main_pid;		/* Real process ID */
+
+static CORE_ADDR P_cma__g_known_threads;
+static CORE_ADDR P_cma__g_current_thread;
+
+static struct cleanup * save_inferior_pid PARAMS ((void));
+
+static void restore_inferior_pid PARAMS ((int pid));
+
+static void hpux_thread_resume PARAMS ((int pid, int step,
+					enum target_signal signo));
+
+static void init_hpux_thread_ops PARAMS ((void));
+
+static struct target_ops hpux_thread_ops;
+
+/*
+
+LOCAL FUNCTION
+
+	save_inferior_pid - Save inferior_pid on the cleanup list
+	restore_inferior_pid - Restore inferior_pid from the cleanup list
+
+SYNOPSIS
+
+	struct cleanup *save_inferior_pid ()
+	void restore_inferior_pid (int pid)
+
+DESCRIPTION
+
+	These two functions act in unison to restore inferior_pid in
+	case of an error.
+
+NOTES
+
+	inferior_pid is a global variable that needs to be changed by many of
+	these routines before calling functions in procfs.c.  In order to
+	guarantee that inferior_pid gets restored (in case of errors), you
+	need to call save_inferior_pid before changing it.  At the end of the
+	function, you should invoke do_cleanups to restore it.
+
+ */
+
+
+static struct cleanup *
+save_inferior_pid ()
+{
+  return make_cleanup (restore_inferior_pid, inferior_pid);
+}
+
+static void
+restore_inferior_pid (pid)
+     int pid;
+{
+  inferior_pid = pid;
+}
+
+static int find_active_thread PARAMS ((void));
+
+static int cached_thread;
+static int cached_active_thread;
+static cma__t_int_tcb cached_tcb;
+
+static int
+find_active_thread ()
+{
+  static cma__t_int_tcb tcb;
+  CORE_ADDR tcb_ptr;
+
+  if (cached_active_thread != 0)
+    return cached_active_thread;
+
+  read_memory ((CORE_ADDR)P_cma__g_current_thread,
+	       (char *)&tcb_ptr,
+	       sizeof tcb_ptr);
+
+  read_memory (tcb_ptr, (char *)&tcb, sizeof tcb);
+
+  return (cma_thread_get_unique (&tcb.prolog.client_thread) << 16) | main_pid;
+}
+
+static cma__t_int_tcb * find_tcb PARAMS ((int thread));
+
+static cma__t_int_tcb *
+find_tcb (thread)
+     int thread;
+{
+  cma__t_known_object queue_header;
+  cma__t_queue *queue_ptr;
+
+  if (thread == cached_thread)
+    return &cached_tcb;
+
+  read_memory ((CORE_ADDR)P_cma__g_known_threads,
+	       (char *)&queue_header,
+	       sizeof queue_header);
+
+  for (queue_ptr = queue_header.queue.flink;
+       queue_ptr != (cma__t_queue *)P_cma__g_known_threads;
+       queue_ptr = cached_tcb.threads.flink)
+    {
+      cma__t_int_tcb *tcb_ptr;
+
+      tcb_ptr = cma__base (queue_ptr, threads, cma__t_int_tcb);
+
+      read_memory ((CORE_ADDR)tcb_ptr, (char *)&cached_tcb, sizeof cached_tcb);
+
+      if (cached_tcb.header.type == cma__c_obj_tcb)
+	if (cma_thread_get_unique (&cached_tcb.prolog.client_thread) == thread >> 16)
+	  {
+	    cached_thread = thread;
+	    return &cached_tcb;
+	  }
+    }
+
+  error ("Can't find TCB %d,%d", thread >> 16, thread & 0xffff);
+  return NULL;
+}
+
+/* Most target vector functions from here on actually just pass through to
+   inftarg.c, as they don't need to do anything specific for threads.  */
+
+/* ARGSUSED */
+static void
+hpux_thread_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  child_ops.to_open (arg, from_tty);
+}
+
+/* Attach to process PID, then initialize for debugging it
+   and wait for the trace-trap that results from attaching.  */
+
+static void
+hpux_thread_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  child_ops.to_attach (args, from_tty);
+
+  /* XXX - might want to iterate over all the threads and register them. */
+}
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via the normal ptrace (PTRACE_TRACEME).  */
+
+static void
+hpux_thread_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  child_ops.to_detach (args, from_tty);
+}
+
+/* Resume execution of process PID.  If STEP is nozero, then
+   just single step it.  If SIGNAL is nonzero, restart it with that
+   signal activated.  We may have to convert pid from a thread-id to an LWP id
+   for procfs.  */
+
+static void
+hpux_thread_resume (pid, step, signo)
+     int pid;
+     int step;
+     enum target_signal signo;
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  pid = inferior_pid = main_pid;
+
+#if 0
+  if (pid != -1)
+    {
+      pid = thread_to_lwp (pid, -2);
+      if (pid == -2)		/* Inactive thread */
+	error ("This version of Solaris can't start inactive threads.");
+    }
+#endif
+
+  child_ops.to_resume (pid, step, signo);
+
+  cached_thread = 0;
+  cached_active_thread = 0;
+
+  do_cleanups (old_chain);
+}
+
+/* Wait for any threads to stop.  We may have to convert PID from a thread id
+   to a LWP id, and vice versa on the way out.  */
+
+static int
+hpux_thread_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  int rtnval;
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = main_pid;
+
+  if (pid != -1)
+    pid = main_pid;
+
+  rtnval = child_ops.to_wait (pid, ourstatus);
+
+  rtnval = find_active_thread ();
+
+  do_cleanups (old_chain);
+
+  return rtnval;
+}
+
+static char regmap[NUM_REGS] =
+{
+  -2, -1, -1, 0, 4, 8, 12, 16, 20, 24, /* flags, r1 -> r9 */
+  28, 32, 36, 40, 44, 48, 52, 56, 60, -1, /* r10 -> r19 */
+  -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, /* r20 -> r29 */
+
+  /* r30, r31, sar, pcoqh, pcsqh, pcoqt, pcsqt, eiem, iir, isr */
+  -2, -1, -1, -2, -1, -1, -1, -1, -1, -1,
+
+  /* ior, ipsw, goto, sr4, sr0, sr1, sr2, sr3, sr5, sr6 */
+  -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+
+  /* sr7, cr0, cr8, cr9, ccr, cr12, cr13, cr24, cr25, cr26 */
+  -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+
+  -1, -1, -1, -1,		/* mpsfu_high, mpsfu_low, mpsfu_ovflo, pad */
+  144, -1, -1, -1, -1, -1, -1, -1, /* fpsr, fpe1 -> fpe7 */
+  -1, -1, -1, -1, -1, -1, -1, -1, /* fr4 -> fr7 */
+  -1, -1, -1, -1, -1, -1, -1, -1, /* fr8 -> fr11 */
+  136, -1, 128, -1, 120, -1, 112, -1, /* fr12 -> fr15 */
+  104, -1, 96, -1, 88, -1, 80, -1, /* fr16 -> fr19 */
+  72, -1, 64, -1, -1, -1, -1, -1, /* fr20 -> fr23 */
+  -1, -1, -1, -1, -1, -1, -1, -1, /* fr24 -> fr27 */
+  -1, -1, -1, -1, -1, -1, -1, -1, /* fr28 -> fr31 */
+};
+
+static void
+hpux_thread_fetch_registers (regno)
+     int regno;
+{
+  cma__t_int_tcb tcb, *tcb_ptr;
+  struct cleanup *old_chain;
+  int i;
+  int first_regno, last_regno;
+
+  tcb_ptr = find_tcb (inferior_pid);
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = main_pid;
+
+  if (tcb_ptr->state == cma__c_state_running)
+    {
+      child_ops.to_fetch_registers (regno);
+
+      do_cleanups (old_chain);
+
+      return;
+    }
+
+  if (regno == -1)
+    {
+      first_regno = 0;
+      last_regno = NUM_REGS - 1;
+    }
+  else
+    {
+      first_regno = regno;
+      last_regno = regno;
+    }
+
+  for (regno = first_regno; regno <= last_regno; regno++)
+    {
+      if (regmap[regno] == -1)
+	child_ops.to_fetch_registers (regno);
+      else
+	{
+	  unsigned char buf[MAX_REGISTER_RAW_SIZE];
+	  CORE_ADDR sp;
+
+	  sp = (CORE_ADDR)tcb_ptr->static_ctx.sp - 160;
+
+	  if (regno == FLAGS_REGNUM)
+	    /* Flags must be 0 to avoid bogus value for SS_INSYSCALL */
+	    memset (buf, '\000', REGISTER_RAW_SIZE (regno));
+	  else if (regno == SP_REGNUM)
+	    store_address (buf, sizeof sp, sp);
+	  else if (regno == PC_REGNUM)
+	    read_memory (sp - 20, buf, REGISTER_RAW_SIZE (regno));
+	  else
+	    read_memory (sp + regmap[regno], buf, REGISTER_RAW_SIZE (regno));
+
+	  supply_register (regno, buf);
+	}
+    }
+
+  do_cleanups (old_chain);
+}
+
+static void
+hpux_thread_store_registers (regno)
+     int regno;
+{
+  cma__t_int_tcb tcb, *tcb_ptr;
+  struct cleanup *old_chain;
+  int i;
+  int first_regno, last_regno;
+
+  tcb_ptr = find_tcb (inferior_pid);
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = main_pid;
+
+  if (tcb_ptr->state == cma__c_state_running)
+    {
+      child_ops.to_store_registers (regno);
+
+      do_cleanups (old_chain);
+
+      return;
+    }
+
+  if (regno == -1)
+    {
+      first_regno = 0;
+      last_regno = NUM_REGS - 1;
+    }
+  else
+    {
+      first_regno = regno;
+      last_regno = regno;
+    }
+
+  for (regno = first_regno; regno <= last_regno; regno++)
+    {
+      if (regmap[regno] == -1)
+	child_ops.to_store_registers (regno);
+      else
+	{
+	  unsigned char buf[MAX_REGISTER_RAW_SIZE];
+	  CORE_ADDR sp;
+
+	  sp = (CORE_ADDR)tcb_ptr->static_ctx.sp - 160;
+
+	  if (regno == FLAGS_REGNUM)
+	    child_ops.to_store_registers (regno); /* Let lower layer handle this... */
+	  else if (regno == SP_REGNUM)
+	    {
+	      write_memory ((CORE_ADDR)&tcb_ptr->static_ctx.sp,
+			    registers + REGISTER_BYTE (regno),
+			    REGISTER_RAW_SIZE (regno));
+	      tcb_ptr->static_ctx.sp = (cma__t_hppa_regs *)
+		(extract_address (registers + REGISTER_BYTE (regno), REGISTER_RAW_SIZE (regno)) + 160);
+	    }
+	  else if (regno == PC_REGNUM)
+	    write_memory (sp - 20,
+			  registers + REGISTER_BYTE (regno),
+			  REGISTER_RAW_SIZE (regno));
+	  else
+	    write_memory (sp + regmap[regno],
+			  registers + REGISTER_BYTE (regno),
+			  REGISTER_RAW_SIZE (regno));
+	}
+    }
+
+  do_cleanups (old_chain);
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+hpux_thread_prepare_to_store ()
+{
+  child_ops.to_prepare_to_store ();
+}
+
+static int
+hpux_thread_xfer_memory (memaddr, myaddr, len, dowrite, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int dowrite;
+     struct target_ops *target; /* ignored */
+{
+  int retval;
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = main_pid;
+
+  retval = child_ops.to_xfer_memory (memaddr, myaddr, len, dowrite, target);
+
+  do_cleanups (old_chain);
+
+  return retval;
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+hpux_thread_files_info (ignore)
+     struct target_ops *ignore;
+{
+  child_ops.to_files_info (ignore);
+}
+
+static void
+hpux_thread_kill_inferior ()
+{
+  child_ops.to_kill ();
+}
+
+static void
+hpux_thread_notice_signals (pid)
+     int pid;
+{
+  child_ops.to_notice_signals (pid);
+}
+
+/* Fork an inferior process, and start debugging it with /proc.  */
+
+static void
+hpux_thread_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  child_ops.to_create_inferior (exec_file, allargs, env);
+
+  if (hpux_thread_active)
+    {
+      main_pid = inferior_pid;
+
+      push_target (&hpux_thread_ops);
+
+      inferior_pid = find_active_thread ();
+
+      add_thread (inferior_pid);
+    }
+}
+
+/* This routine is called whenever a new symbol table is read in, or when all
+   symbol tables are removed.  libthread_db can only be initialized when it
+   finds the right variables in libthread.so.  Since it's a shared library,
+   those variables don't show up until the library gets mapped and the symbol
+   table is read in.  */
+
+void
+hpux_thread_new_objfile (objfile)
+     struct objfile *objfile;
+{
+  struct minimal_symbol *ms;
+
+  if (!objfile)
+    {
+      hpux_thread_active = 0;
+
+      return;
+    }
+
+  ms = lookup_minimal_symbol ("cma__g_known_threads", NULL, objfile);
+
+  if (!ms)
+    return;
+
+  P_cma__g_known_threads = SYMBOL_VALUE_ADDRESS (ms);
+
+  ms = lookup_minimal_symbol ("cma__g_current_thread", NULL, objfile);
+
+  if (!ms)
+    return;
+
+  P_cma__g_current_thread = SYMBOL_VALUE_ADDRESS (ms);
+
+  hpux_thread_active = 1;
+}
+
+/* Clean up after the inferior dies.  */
+
+static void
+hpux_thread_mourn_inferior ()
+{
+  child_ops.to_mourn_inferior ();
+}
+
+/* Mark our target-struct as eligible for stray "run" and "attach" commands.  */
+
+static int
+hpux_thread_can_run ()
+{
+  return child_suppress_run;
+}
+
+static int
+hpux_thread_alive (pid)
+     int pid;
+{
+  return 1;
+}
+
+static void
+hpux_thread_stop ()
+{
+  child_ops.to_stop ();
+}
+
+/* Convert a pid to printable form. */
+
+char *
+hpux_pid_to_str (pid)
+     int pid;
+{
+  static char buf[100];
+
+  sprintf (buf, "Thread %d", pid >> 16);
+
+  return buf;
+}
+
+static void
+init_hpux_thread_ops ()
+{
+  hpux_thread_ops.to_shortname = "hpux-threads";
+  hpux_thread_ops.to_longname = "HPUX threads and pthread.";
+  hpux_thread_ops.to_doc = "HPUX threads and pthread support.";
+  hpux_thread_ops.to_open = hpux_thread_open;
+  hpux_thread_ops.to_attach = hpux_thread_attach;
+  hpux_thread_ops.to_detach = hpux_thread_detach;
+  hpux_thread_ops.to_resume = hpux_thread_resume;
+  hpux_thread_ops.to_wait = hpux_thread_wait;
+  hpux_thread_ops.to_fetch_registers = hpux_thread_fetch_registers;
+  hpux_thread_ops.to_store_registers = hpux_thread_store_registers;
+  hpux_thread_ops.to_prepare_to_store = hpux_thread_prepare_to_store;
+  hpux_thread_ops.to_xfer_memory = hpux_thread_xfer_memory;
+  hpux_thread_ops.to_files_info = hpux_thread_files_info;
+  hpux_thread_ops.to_insert_breakpoint = memory_insert_breakpoint;
+  hpux_thread_ops.to_remove_breakpoint = memory_remove_breakpoint;
+  hpux_thread_ops.to_terminal_init = terminal_init_inferior;
+  hpux_thread_ops.to_terminal_inferior = terminal_inferior;
+  hpux_thread_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+  hpux_thread_ops.to_terminal_ours = terminal_ours;
+  hpux_thread_ops.to_terminal_info = child_terminal_info;
+  hpux_thread_ops.to_kill = hpux_thread_kill_inferior;
+  hpux_thread_ops.to_create_inferior = hpux_thread_create_inferior;
+  hpux_thread_ops.to_mourn_inferior = hpux_thread_mourn_inferior;
+  hpux_thread_ops.to_can_run = hpux_thread_can_run;
+  hpux_thread_ops.to_notice_signals = hpux_thread_notice_signals;
+  hpux_thread_ops.to_thread_alive = hpux_thread_thread_alive;
+  hpux_thread_ops.to_stop = hpux_thread_stop;
+  hpux_thread_ops.to_stratum = process_stratum;
+  hpux_thread_ops.to_has_all_memory = 1;
+  hpux_thread_ops.to_has_memory = 1;
+  hpux_thread_ops.to_has_stack = 1;
+  hpux_thread_ops.to_has_registers = 1;
+  hpux_thread_ops.to_has_execution = 1;
+  hpux_thread_ops.to_magic = OPS_MAGIC;
+}
+
+void
+_initialize_hpux_thread ()
+{
+  init_hpux_thread_ops ();
+  add_target (&hpux_thread_ops);
+
+  child_suppress_run = 1;
+}
diff --git a/gdb/i386-stub.c b/gdb/i386-stub.c
new file mode 100644
index 0000000..768f00c
--- /dev/null
+++ b/gdb/i386-stub.c
@@ -0,0 +1,927 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for 386 by Jim Kingdon, Cygnus Support.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *  The external function exceptionHandler() is
+ *  used to attach a specific handler to a specific 386 vector number.
+ *  It should use the same privilege level it runs at.  It should
+ *  install it as an interrupt gate so that interrupts are masked
+ *  while the handler runs.
+ *  Also, need to assign exceptionHook and oldExceptionHook.
+ *
+ *  Because gdb will sometimes write to the stack area to execute function
+ *  calls, this program cannot rely on using the supervisor stack so it
+ *  uses it's own stack area reserved in the int array remcomStack.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+typedef void (*ExceptionHook)(int);   /* pointer to function with int parm */
+typedef void (*Function)();           /* pointer to a function */
+
+extern void putDebugChar();	/* write a single character      */
+extern int getDebugChar();	/* read and return a single char */
+
+extern Function exceptionHandler();  /* assign an exception handler */
+extern ExceptionHook exceptionHook;  /* hook variable for errors/exceptions */
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 400
+
+static char initialized;  /* boolean flag. != 0 means we've been initialized */
+
+int     remote_debug;
+/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */
+
+void waitabit();
+
+static const char hexchars[]="0123456789abcdef";
+
+/* Number of registers.  */
+#define NUMREGS	16
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES (NUMREGS * 4)
+
+enum regnames {EAX, ECX, EDX, EBX, ESP, EBP, ESI, EDI,
+	       PC /* also known as eip */,
+	       PS /* also known as eflags */,
+	       CS, SS, DS, ES, FS, GS};
+
+/*
+ * these should not be static cuz they can be used outside this module
+ */
+int registers[NUMREGS];
+
+#define STACKSIZE 10000
+int remcomStack[STACKSIZE/sizeof(int)];
+static int* stackPtr = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+/*
+ * In many cases, the system will want to continue exception processing
+ * when a continue command is given.
+ * oldExceptionHook is a function to invoke in this case.
+ */
+
+static ExceptionHook oldExceptionHook;
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+extern void
+return_to_prog ();
+
+/* Restore the program's registers (including the stack pointer, which
+   means we get the right stack and don't have to worry about popping our
+   return address and any stack frames and so on) and return.  */
+asm(".text");
+asm(".globl _return_to_prog");
+asm("_return_to_prog:");
+asm("        movw _registers+44, %ss");
+asm("        movl _registers+16, %esp");
+asm("        movl _registers+4, %ecx");
+asm("        movl _registers+8, %edx");
+asm("        movl _registers+12, %ebx");
+asm("        movl _registers+20, %ebp");
+asm("        movl _registers+24, %esi");
+asm("        movl _registers+28, %edi");
+asm("        movw _registers+48, %ds");
+asm("        movw _registers+52, %es");
+asm("        movw _registers+56, %fs");
+asm("        movw _registers+60, %gs");
+asm("        movl _registers+36, %eax");
+asm("        pushl %eax");  /* saved eflags */
+asm("        movl _registers+40, %eax");
+asm("        pushl %eax");  /* saved cs */
+asm("        movl _registers+32, %eax");
+asm("        pushl %eax");  /* saved eip */
+asm("        movl _registers, %eax");
+/* use iret to restore pc and flags together so
+   that trace flag works right.  */
+asm("        iret");
+
+#define BREAKPOINT() asm("   int $3");
+
+/* Put the error code here just in case the user cares.  */
+int gdb_i386errcode;
+/* Likewise, the vector number here (since GDB only gets the signal
+   number through the usual means, and that's not very specific).  */
+int gdb_i386vector = -1;
+
+/* GDB stores segment registers in 32-bit words (that's just the way
+   m-i386v.h is written).  So zero the appropriate areas in registers.  */
+#define SAVE_REGISTERS1() \
+  asm ("movl %eax, _registers");                                   	  \
+  asm ("movl %ecx, _registers+4");			  		     \
+  asm ("movl %edx, _registers+8");			  		     \
+  asm ("movl %ebx, _registers+12");			  		     \
+  asm ("movl %ebp, _registers+20");			  		     \
+  asm ("movl %esi, _registers+24");			  		     \
+  asm ("movl %edi, _registers+28");			  		     \
+  asm ("movw $0, %ax");							     \
+  asm ("movw %ds, _registers+48");			  		     \
+  asm ("movw %ax, _registers+50");					     \
+  asm ("movw %es, _registers+52");			  		     \
+  asm ("movw %ax, _registers+54");					     \
+  asm ("movw %fs, _registers+56");			  		     \
+  asm ("movw %ax, _registers+58");					     \
+  asm ("movw %gs, _registers+60");			  		     \
+  asm ("movw %ax, _registers+62");
+#define SAVE_ERRCODE() \
+  asm ("popl %ebx");                                  \
+  asm ("movl %ebx, _gdb_i386errcode");
+#define SAVE_REGISTERS2() \
+  asm ("popl %ebx"); /* old eip */			  		     \
+  asm ("movl %ebx, _registers+32");			  		     \
+  asm ("popl %ebx");	 /* old cs */			  		     \
+  asm ("movl %ebx, _registers+40");			  		     \
+  asm ("movw %ax, _registers+42");                                           \
+  asm ("popl %ebx");	 /* old eflags */		  		     \
+  asm ("movl %ebx, _registers+36");			 		     \
+  /* Now that we've done the pops, we can save the stack pointer.");  */   \
+  asm ("movw %ss, _registers+44");					     \
+  asm ("movw %ax, _registers+46");     	       	       	       	       	     \
+  asm ("movl %esp, _registers+16");
+
+/* See if mem_fault_routine is set, if so just IRET to that address.  */
+#define CHECK_FAULT() \
+  asm ("cmpl $0, _mem_fault_routine");					   \
+  asm ("jne mem_fault");
+
+asm (".text");
+asm ("mem_fault:");
+/* OK to clobber temp registers; we're just going to end up in set_mem_err.  */
+/* Pop error code from the stack and save it.  */
+asm ("     popl %eax");
+asm ("     movl %eax, _gdb_i386errcode");
+
+asm ("     popl %eax"); /* eip */
+/* We don't want to return there, we want to return to the function
+   pointed to by mem_fault_routine instead.  */
+asm ("     movl _mem_fault_routine, %eax");
+asm ("     popl %ecx"); /* cs (low 16 bits; junk in hi 16 bits).  */
+asm ("     popl %edx"); /* eflags */
+
+/* Remove this stack frame; when we do the iret, we will be going to
+   the start of a function, so we want the stack to look just like it
+   would after a "call" instruction.  */
+asm ("     leave");
+
+/* Push the stuff that iret wants.  */
+asm ("     pushl %edx"); /* eflags */
+asm ("     pushl %ecx"); /* cs */
+asm ("     pushl %eax"); /* eip */
+
+/* Zero mem_fault_routine.  */
+asm ("     movl $0, %eax");
+asm ("     movl %eax, _mem_fault_routine");
+
+asm ("iret");
+
+#define CALL_HOOK() asm("call _remcomHandler");
+
+/* This function is called when a i386 exception occurs.  It saves
+ * all the cpu regs in the _registers array, munges the stack a bit,
+ * and invokes an exception handler (remcom_handler).
+ *
+ * stack on entry:                       stack on exit:
+ *   old eflags                          vector number
+ *   old cs (zero-filled to 32 bits)
+ *   old eip
+ *
+ */
+extern void _catchException3();
+asm(".text");
+asm(".globl __catchException3");
+asm("__catchException3:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $3");
+CALL_HOOK();
+
+/* Same thing for exception 1.  */
+extern void _catchException1();
+asm(".text");
+asm(".globl __catchException1");
+asm("__catchException1:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $1");
+CALL_HOOK();
+
+/* Same thing for exception 0.  */
+extern void _catchException0();
+asm(".text");
+asm(".globl __catchException0");
+asm("__catchException0:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $0");
+CALL_HOOK();
+
+/* Same thing for exception 4.  */
+extern void _catchException4();
+asm(".text");
+asm(".globl __catchException4");
+asm("__catchException4:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $4");
+CALL_HOOK();
+
+/* Same thing for exception 5.  */
+extern void _catchException5();
+asm(".text");
+asm(".globl __catchException5");
+asm("__catchException5:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $5");
+CALL_HOOK();
+
+/* Same thing for exception 6.  */
+extern void _catchException6();
+asm(".text");
+asm(".globl __catchException6");
+asm("__catchException6:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $6");
+CALL_HOOK();
+
+/* Same thing for exception 7.  */
+extern void _catchException7();
+asm(".text");
+asm(".globl __catchException7");
+asm("__catchException7:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $7");
+CALL_HOOK();
+
+/* Same thing for exception 8.  */
+extern void _catchException8();
+asm(".text");
+asm(".globl __catchException8");
+asm("__catchException8:");
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $8");
+CALL_HOOK();
+
+/* Same thing for exception 9.  */
+extern void _catchException9();
+asm(".text");
+asm(".globl __catchException9");
+asm("__catchException9:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $9");
+CALL_HOOK();
+
+/* Same thing for exception 10.  */
+extern void _catchException10();
+asm(".text");
+asm(".globl __catchException10");
+asm("__catchException10:");
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $10");
+CALL_HOOK();
+
+/* Same thing for exception 12.  */
+extern void _catchException12();
+asm(".text");
+asm(".globl __catchException12");
+asm("__catchException12:");
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $12");
+CALL_HOOK();
+
+/* Same thing for exception 16.  */
+extern void _catchException16();
+asm(".text");
+asm(".globl __catchException16");
+asm("__catchException16:");
+SAVE_REGISTERS1();
+SAVE_REGISTERS2();
+asm ("pushl $16");
+CALL_HOOK();
+
+/* For 13, 11, and 14 we have to deal with the CHECK_FAULT stuff.  */
+
+/* Same thing for exception 13.  */
+extern void _catchException13 ();
+asm (".text");
+asm (".globl __catchException13");
+asm ("__catchException13:");
+CHECK_FAULT();
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $13");
+CALL_HOOK();
+
+/* Same thing for exception 11.  */
+extern void _catchException11 ();
+asm (".text");
+asm (".globl __catchException11");
+asm ("__catchException11:");
+CHECK_FAULT();
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $11");
+CALL_HOOK();
+
+/* Same thing for exception 14.  */
+extern void _catchException14 ();
+asm (".text");
+asm (".globl __catchException14");
+asm ("__catchException14:");
+CHECK_FAULT();
+SAVE_REGISTERS1();
+SAVE_ERRCODE();
+SAVE_REGISTERS2();
+asm ("pushl $14");
+CALL_HOOK();
+
+/*
+ * remcomHandler is a front end for handle_exception.  It moves the
+ * stack pointer into an area reserved for debugger use.
+ */
+asm("_remcomHandler:");
+asm("           popl %eax");        /* pop off return address     */
+asm("           popl %eax");      /* get the exception number   */
+asm("		movl _stackPtr, %esp"); /* move to remcom stack area  */
+asm("		pushl %eax");	/* push exception onto stack  */
+asm("		call  _handle_exception");    /* this never returns */
+
+void _returnFromException()
+{
+  return_to_prog ();
+}
+
+int hex(ch)
+char ch;
+{
+  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
+  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
+  if ((ch >= 'A') && (ch <= 'F')) return (ch-'A'+10);
+  return (-1);
+}
+
+
+/* scan for the sequence $<data>#<checksum>     */
+void getpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int  i;
+  int  count;
+  char ch;
+
+  do {
+    /* wait around for the start character, ignore all other characters */
+    while ((ch = (getDebugChar() & 0x7f)) != '$');
+    checksum = 0;
+    xmitcsum = -1;
+
+    count = 0;
+
+    /* now, read until a # or end of buffer is found */
+    while (count < BUFMAX) {
+      ch = getDebugChar() & 0x7f;
+      if (ch == '#') break;
+      checksum = checksum + ch;
+      buffer[count] = ch;
+      count = count + 1;
+      }
+    buffer[count] = 0;
+
+    if (ch == '#') {
+      xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+      xmitcsum += hex(getDebugChar() & 0x7f);
+      if ((remote_debug ) && (checksum != xmitcsum)) {
+        fprintf (stderr ,"bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
+		 checksum,xmitcsum,buffer);
+      }
+
+      if (checksum != xmitcsum) putDebugChar('-');  /* failed checksum */
+      else {
+	 putDebugChar('+');  /* successful transfer */
+	 /* if a sequence char is present, reply the sequence ID */
+	 if (buffer[2] == ':') {
+	    putDebugChar( buffer[0] );
+	    putDebugChar( buffer[1] );
+	    /* remove sequence chars from buffer */
+	    count = strlen(buffer);
+	    for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
+	 }
+      }
+    }
+  } while (checksum != xmitcsum);
+
+}
+
+/* send the packet in buffer.  */
+
+
+void putpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  int  count;
+  char ch;
+
+  /*  $<packet info>#<checksum>. */
+  do {
+  putDebugChar('$');
+  checksum = 0;
+  count    = 0;
+
+  while (ch=buffer[count]) {
+    putDebugChar(ch);
+    checksum += ch;
+    count += 1;
+  }
+
+  putDebugChar('#');
+  putDebugChar(hexchars[checksum >> 4]);
+  putDebugChar(hexchars[checksum % 16]);
+
+  } while ((getDebugChar() & 0x7f) != '+');
+
+}
+
+char  remcomInBuffer[BUFMAX];
+char  remcomOutBuffer[BUFMAX];
+static short error;
+
+
+void debug_error(format, parm)
+char * format;
+char * parm;
+{
+  if (remote_debug) fprintf (stderr,format,parm);
+}
+
+/* Address of a routine to RTE to if we get a memory fault.  */
+static void (*volatile mem_fault_routine)() = NULL;
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+   error.  */
+static volatile int mem_err = 0;
+
+void
+set_mem_err ()
+{
+  mem_err = 1;
+}
+
+/* These are separate functions so that they are so short and sweet
+   that the compiler won't save any registers (if there is a fault
+   to mem_fault, they won't get restored, so there better not be any
+   saved).  */
+int
+get_char (addr)
+     char *addr;
+{
+  return *addr;
+}
+
+void
+set_char (addr, val)
+     char *addr;
+     int val;
+{
+  *addr = val;
+}
+
+/* convert the memory pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+/* If MAY_FAULT is non-zero, then we should set mem_err in response to
+   a fault; if zero treat a fault like any other fault in the stub.  */
+char* mem2hex(mem, buf, count, may_fault)
+char* mem;
+char* buf;
+int   count;
+int may_fault;
+{
+      int i;
+      unsigned char ch;
+
+      if (may_fault)
+	  mem_fault_routine = set_mem_err;
+      for (i=0;i<count;i++) {
+          ch = get_char (mem++);
+	  if (may_fault && mem_err)
+	    return (buf);
+          *buf++ = hexchars[ch >> 4];
+          *buf++ = hexchars[ch % 16];
+      }
+      *buf = 0;
+      if (may_fault)
+	  mem_fault_routine = NULL;
+      return(buf);
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem */
+/* return a pointer to the character AFTER the last byte written */
+char* hex2mem(buf, mem, count, may_fault)
+char* buf;
+char* mem;
+int   count;
+int may_fault;
+{
+      int i;
+      unsigned char ch;
+
+      if (may_fault)
+	  mem_fault_routine = set_mem_err;
+      for (i=0;i<count;i++) {
+          ch = hex(*buf++) << 4;
+          ch = ch + hex(*buf++);
+          set_char (mem++, ch);
+	  if (may_fault && mem_err)
+	    return (mem);
+      }
+      if (may_fault)
+	  mem_fault_routine = NULL;
+      return(mem);
+}
+
+/* this function takes the 386 exception vector and attempts to
+   translate this number into a unix compatible signal value */
+int computeSignal( exceptionVector )
+int exceptionVector;
+{
+  int sigval;
+  switch (exceptionVector) {
+    case 0 : sigval = 8; break; /* divide by zero */
+    case 1 : sigval = 5; break; /* debug exception */
+    case 3 : sigval = 5; break; /* breakpoint */
+    case 4 : sigval = 16; break; /* into instruction (overflow) */
+    case 5 : sigval = 16; break; /* bound instruction */
+    case 6 : sigval = 4; break; /* Invalid opcode */
+    case 7 : sigval = 8; break; /* coprocessor not available */
+    case 8 : sigval = 7; break; /* double fault */
+    case 9 : sigval = 11; break; /* coprocessor segment overrun */
+    case 10 : sigval = 11; break; /* Invalid TSS */
+    case 11 : sigval = 11; break; /* Segment not present */
+    case 12 : sigval = 11; break; /* stack exception */
+    case 13 : sigval = 11; break; /* general protection */
+    case 14 : sigval = 11; break; /* page fault */
+    case 16 : sigval = 7; break; /* coprocessor error */
+    default:
+      sigval = 7;         /* "software generated"*/
+  }
+  return (sigval);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+int hexToInt(char **ptr, int *intValue)
+{
+    int numChars = 0;
+    int hexValue;
+
+    *intValue = 0;
+
+    while (**ptr)
+    {
+        hexValue = hex(**ptr);
+        if (hexValue >=0)
+        {
+            *intValue = (*intValue <<4) | hexValue;
+            numChars ++;
+        }
+        else
+            break;
+
+        (*ptr)++;
+    }
+
+    return (numChars);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ */
+void handle_exception(int exceptionVector)
+{
+  int    sigval;
+  int    addr, length;
+  char * ptr;
+  int    newPC;
+
+  gdb_i386vector = exceptionVector;
+
+  if (remote_debug) printf("vector=%d, sr=0x%x, pc=0x%x\n",
+			    exceptionVector,
+			    registers[ PS ],
+			    registers[ PC ]);
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal( exceptionVector );
+  remcomOutBuffer[0] = 'S';
+  remcomOutBuffer[1] =  hexchars[sigval >> 4];
+  remcomOutBuffer[2] =  hexchars[sigval % 16];
+  remcomOutBuffer[3] = 0;
+
+  putpacket(remcomOutBuffer);
+
+  while (1==1) {
+    error = 0;
+    remcomOutBuffer[0] = 0;
+    getpacket(remcomInBuffer);
+    switch (remcomInBuffer[0]) {
+      case '?' :   remcomOutBuffer[0] = 'S';
+                   remcomOutBuffer[1] =  hexchars[sigval >> 4];
+                   remcomOutBuffer[2] =  hexchars[sigval % 16];
+                   remcomOutBuffer[3] = 0;
+                 break;
+      case 'd' : remote_debug = !(remote_debug);  /* toggle debug flag */
+                 break;
+      case 'g' : /* return the value of the CPU registers */
+                mem2hex((char*) registers, remcomOutBuffer, NUMREGBYTES, 0);
+                break;
+      case 'G' : /* set the value of the CPU registers - return OK */
+                hex2mem(&remcomInBuffer[1], (char*) registers, NUMREGBYTES, 0);
+                strcpy(remcomOutBuffer,"OK");
+                break;
+      case 'P' : /* set the value of a single CPU register - return OK */
+                {
+                  int regno;
+
+                  ptr = &remcomInBuffer[1];
+                  if (hexToInt (&ptr, &regno) && *ptr++ == '=') 
+                  if (regno >= 0 && regno < NUMREGS)
+                    {
+                      hex2mem (ptr, (char *)&registers[regno], 4, 0);
+                      strcpy(remcomOutBuffer,"OK");
+                      break;
+                    }
+
+                  strcpy (remcomOutBuffer, "E01");
+                  break;
+                }
+
+      /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+      case 'm' :
+		    /* TRY TO READ %x,%x.  IF SUCCEED, SET PTR = 0 */
+                    ptr = &remcomInBuffer[1];
+                    if (hexToInt(&ptr,&addr))
+                        if (*(ptr++) == ',')
+                            if (hexToInt(&ptr,&length))
+                            {
+                                ptr = 0;
+				mem_err = 0;
+                                mem2hex((char*) addr, remcomOutBuffer, length, 1);
+				if (mem_err) {
+				    strcpy (remcomOutBuffer, "E03");
+				    debug_error ("memory fault");
+				}
+                            }
+
+                    if (ptr)
+                    {
+		      strcpy(remcomOutBuffer,"E01");
+		      debug_error("malformed read memory command: %s",remcomInBuffer);
+		    }
+	          break;
+
+      /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+      case 'M' :
+		    /* TRY TO READ '%x,%x:'.  IF SUCCEED, SET PTR = 0 */
+                    ptr = &remcomInBuffer[1];
+                    if (hexToInt(&ptr,&addr))
+                        if (*(ptr++) == ',')
+                            if (hexToInt(&ptr,&length))
+                                if (*(ptr++) == ':')
+                                {
+				    mem_err = 0;
+                                    hex2mem(ptr, (char*) addr, length, 1);
+
+				    if (mem_err) {
+					strcpy (remcomOutBuffer, "E03");
+					debug_error ("memory fault");
+				    } else {
+				        strcpy(remcomOutBuffer,"OK");
+				    }
+
+                                    ptr = 0;
+                                }
+                    if (ptr)
+                    {
+		      strcpy(remcomOutBuffer,"E02");
+		      debug_error("malformed write memory command: %s",remcomInBuffer);
+		    }
+                break;
+
+     /* cAA..AA    Continue at address AA..AA(optional) */
+     /* sAA..AA   Step one instruction from AA..AA(optional) */
+     case 'c' :
+     case 's' :
+          /* try to read optional parameter, pc unchanged if no parm */
+         ptr = &remcomInBuffer[1];
+         if (hexToInt(&ptr,&addr))
+             registers[ PC ] = addr;
+
+          newPC = registers[ PC];
+
+          /* clear the trace bit */
+          registers[ PS ] &= 0xfffffeff;
+
+          /* set the trace bit if we're stepping */
+          if (remcomInBuffer[0] == 's') registers[ PS ] |= 0x100;
+
+          /*
+           * If we found a match for the PC AND we are not returning
+           * as a result of a breakpoint (33),
+           * trace exception (9), nmi (31), jmp to
+           * the old exception handler as if this code never ran.
+           */
+#if 0
+	  /* Don't really think we need this, except maybe for protection
+	     exceptions.  */
+                  /*
+                   * invoke the previous handler.
+                   */
+                  if (oldExceptionHook)
+                      (*oldExceptionHook) (frame->exceptionVector);
+                  newPC = registers[ PC ];    /* pc may have changed  */
+#endif /* 0 */
+
+	  _returnFromException(); /* this is a jump */
+
+          break;
+
+      /* kill the program */
+      case 'k' :  /* do nothing */
+#if 0
+	/* Huh? This doesn't look like "nothing".
+	   m68k-stub.c and sparc-stub.c don't have it.  */
+		BREAKPOINT();
+#endif
+                break;
+      } /* switch */
+
+    /* reply to the request */
+    putpacket(remcomOutBuffer);
+    }
+}
+
+/* this function is used to set up exception handlers for tracing and
+   breakpoints */
+void set_debug_traps()
+{
+extern void remcomHandler();
+int exception;
+
+  stackPtr  = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+  exceptionHandler (0, _catchException0);
+  exceptionHandler (1, _catchException1);
+  exceptionHandler (3, _catchException3);
+  exceptionHandler (4, _catchException4);
+  exceptionHandler (5, _catchException5);
+  exceptionHandler (6, _catchException6);
+  exceptionHandler (7, _catchException7);
+  exceptionHandler (8, _catchException8);
+  exceptionHandler (9, _catchException9);
+  exceptionHandler (10, _catchException10);
+  exceptionHandler (11, _catchException11);
+  exceptionHandler (12, _catchException12);
+  exceptionHandler (13, _catchException13);
+  exceptionHandler (14, _catchException14);
+  exceptionHandler (16, _catchException16);
+
+  if (exceptionHook != remcomHandler)
+  {
+      oldExceptionHook = exceptionHook;
+      exceptionHook    = remcomHandler;
+  }
+
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+  putDebugChar ('+');
+
+  initialized = 1;
+
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void breakpoint()
+{
+  if (initialized)
+#if 0
+    handle_exception(3);
+#else
+    BREAKPOINT();
+#endif
+  waitabit();
+}
+
+int waitlimit = 1000000;
+
+void
+waitabit()
+{
+  int i;
+  for (i = 0; i < waitlimit; i++) ;
+}
diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
new file mode 100644
index 0000000..1daa81d
--- /dev/null
+++ b/gdb/i386-tdep.c
@@ -0,0 +1,794 @@
+/* Intel 386 target-dependent stuff.
+   Copyright (C) 1988, 1989, 1991, 1994, 1995, 1996, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "floatformat.h"
+#include "symtab.h"
+#include "gdbcmd.h"
+#include "command.h"
+
+static long i386_get_frame_setup PARAMS ((CORE_ADDR));
+
+static void i386_follow_jump PARAMS ((void));
+
+static void codestream_read PARAMS ((unsigned char *, int));
+
+static void codestream_seek PARAMS ((CORE_ADDR));
+
+static unsigned char codestream_fill PARAMS ((int));
+
+CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR, char *));
+
+static int gdb_print_insn_i386 (bfd_vma, disassemble_info *);
+
+void _initialize_i386_tdep PARAMS ((void));
+
+/* This is the variable the is set with "set disassembly-flavor",
+ and its legitimate values. */
+static char att_flavor[] = "att";
+static char intel_flavor[] = "intel";
+static char *valid_flavors[] = {
+  att_flavor,
+  intel_flavor,
+  NULL
+};
+static char *disassembly_flavor = att_flavor;
+
+/* Stdio style buffering was used to minimize calls to ptrace, but this
+   buffering did not take into account that the code section being accessed
+   may not be an even number of buffers long (even if the buffer is only
+   sizeof(int) long).  In cases where the code section size happened to
+   be a non-integral number of buffers long, attempting to read the last
+   buffer would fail.  Simply using target_read_memory and ignoring errors,
+   rather than read_memory, is not the correct solution, since legitimate
+   access errors would then be totally ignored.  To properly handle this
+   situation and continue to use buffering would require that this code
+   be able to determine the minimum code section size granularity (not the
+   alignment of the section itself, since the actual failing case that
+   pointed out this problem had a section alignment of 4 but was not a
+   multiple of 4 bytes long), on a target by target basis, and then
+   adjust it's buffer size accordingly.  This is messy, but potentially
+   feasible.  It probably needs the bfd library's help and support.  For
+   now, the buffer size is set to 1.  (FIXME -fnf) */
+
+#define CODESTREAM_BUFSIZ 1	/* Was sizeof(int), see note above. */
+static CORE_ADDR codestream_next_addr;
+static CORE_ADDR codestream_addr;
+static unsigned char codestream_buf[CODESTREAM_BUFSIZ];
+static int codestream_off;
+static int codestream_cnt;
+
+#define codestream_tell() (codestream_addr + codestream_off)
+#define codestream_peek() (codestream_cnt == 0 ? \
+			   codestream_fill(1): codestream_buf[codestream_off])
+#define codestream_get() (codestream_cnt-- == 0 ? \
+			 codestream_fill(0) : codestream_buf[codestream_off++])
+
+static unsigned char 
+codestream_fill (peek_flag)
+    int peek_flag;
+{
+  codestream_addr = codestream_next_addr;
+  codestream_next_addr += CODESTREAM_BUFSIZ;
+  codestream_off = 0;
+  codestream_cnt = CODESTREAM_BUFSIZ;
+  read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ);
+  
+  if (peek_flag)
+    return (codestream_peek());
+  else
+    return (codestream_get());
+}
+
+static void
+codestream_seek (place)
+    CORE_ADDR place;
+{
+  codestream_next_addr = place / CODESTREAM_BUFSIZ;
+  codestream_next_addr *= CODESTREAM_BUFSIZ;
+  codestream_cnt = 0;
+  codestream_fill (1);
+  while (codestream_tell() != place)
+    codestream_get ();
+}
+
+static void
+codestream_read (buf, count)
+     unsigned char *buf;
+     int count;
+{
+  unsigned char *p;
+  int i;
+  p = buf;
+  for (i = 0; i < count; i++)
+    *p++ = codestream_get ();
+}
+
+/* next instruction is a jump, move to target */
+
+static void
+i386_follow_jump ()
+{
+  unsigned char buf[4];
+  long delta;
+
+  int data16;
+  CORE_ADDR pos;
+
+  pos = codestream_tell ();
+
+  data16 = 0;
+  if (codestream_peek () == 0x66)
+    {
+      codestream_get ();
+      data16 = 1;
+    }
+
+  switch (codestream_get ())
+    {
+    case 0xe9:
+      /* relative jump: if data16 == 0, disp32, else disp16 */
+      if (data16)
+	{
+	  codestream_read (buf, 2);
+	  delta = extract_signed_integer (buf, 2);
+
+	  /* include size of jmp inst (including the 0x66 prefix).  */
+	  pos += delta + 4; 
+	}
+      else
+	{
+	  codestream_read (buf, 4);
+	  delta = extract_signed_integer (buf, 4);
+
+	  pos += delta + 5;
+	}
+      break;
+    case 0xeb:
+      /* relative jump, disp8 (ignore data16) */
+      codestream_read (buf, 1);
+      /* Sign-extend it.  */
+      delta = extract_signed_integer (buf, 1);
+
+      pos += delta + 2;
+      break;
+    }
+  codestream_seek (pos);
+}
+
+/*
+ * find & return amound a local space allocated, and advance codestream to
+ * first register push (if any)
+ *
+ * if entry sequence doesn't make sense, return -1, and leave 
+ * codestream pointer random
+ */
+
+static long
+i386_get_frame_setup (pc)
+     CORE_ADDR pc;
+{
+  unsigned char op;
+
+  codestream_seek (pc);
+
+  i386_follow_jump ();
+
+  op = codestream_get ();
+
+  if (op == 0x58)		/* popl %eax */
+    {
+      /*
+       * this function must start with
+       * 
+       *    popl %eax		  0x58
+       *    xchgl %eax, (%esp)  0x87 0x04 0x24
+       * or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00
+       *
+       * (the system 5 compiler puts out the second xchg
+       * inst, and the assembler doesn't try to optimize it,
+       * so the 'sib' form gets generated)
+       * 
+       * this sequence is used to get the address of the return
+       * buffer for a function that returns a structure
+       */
+      int pos;
+      unsigned char buf[4];
+      static unsigned char proto1[3] = { 0x87,0x04,0x24 };
+      static unsigned char proto2[4] = { 0x87,0x44,0x24,0x00 };
+      pos = codestream_tell ();
+      codestream_read (buf, 4);
+      if (memcmp (buf, proto1, 3) == 0)
+	pos += 3;
+      else if (memcmp (buf, proto2, 4) == 0)
+	pos += 4;
+
+      codestream_seek (pos);
+      op = codestream_get (); /* update next opcode */
+    }
+
+  if (op == 0x68 || op == 0x6a)
+    {
+      /*
+       * this function may start with
+       *
+       *   pushl constant
+       *   call _probe
+       *   addl $4, %esp
+       *      followed by 
+       *     pushl %ebp
+       *     etc.
+       */
+      int pos;
+      unsigned char buf[8];
+
+      /* Skip past the pushl instruction; it has either a one-byte 
+         or a four-byte operand, depending on the opcode.  */
+      pos = codestream_tell ();
+      if (op == 0x68)
+	pos += 4;
+      else
+	pos += 1;
+      codestream_seek (pos);
+
+      /* Read the following 8 bytes, which should be "call _probe" (6 bytes)
+         followed by "addl $4,%esp" (2 bytes).  */
+      codestream_read (buf, sizeof (buf));
+      if (buf[0] == 0xe8 && buf[6] == 0xc4 && buf[7] == 0x4)
+	pos += sizeof (buf);
+      codestream_seek (pos);
+      op = codestream_get (); /* update next opcode */
+    }
+
+  if (op == 0x55)		/* pushl %ebp */
+    {			
+      /* check for movl %esp, %ebp - can be written two ways */
+      switch (codestream_get ())
+	{
+	case 0x8b:
+	  if (codestream_get () != 0xec)
+	    return (-1);
+	  break;
+	case 0x89:
+	  if (codestream_get () != 0xe5)
+	    return (-1);
+	  break;
+	default:
+	  return (-1);
+	}
+      /* check for stack adjustment 
+       *
+       *  subl $XXX, %esp
+       *
+       * note: you can't subtract a 16 bit immediate
+       * from a 32 bit reg, so we don't have to worry
+       * about a data16 prefix 
+       */
+      op = codestream_peek ();
+      if (op == 0x83)
+	{
+	  /* subl with 8 bit immed */
+	  codestream_get ();
+	  if (codestream_get () != 0xec)
+	    /* Some instruction starting with 0x83 other than subl.  */
+	    {
+	      codestream_seek (codestream_tell () - 2);
+	      return 0;
+	    }
+	  /* subl with signed byte immediate 
+	   * (though it wouldn't make sense to be negative)
+	   */
+	  return (codestream_get());
+	}
+      else if (op == 0x81)
+	{
+	  char buf[4];
+	  /* Maybe it is subl with 32 bit immedediate.  */
+	  codestream_get();
+	  if (codestream_get () != 0xec)
+	    /* Some instruction starting with 0x81 other than subl.  */
+	    {
+	      codestream_seek (codestream_tell () - 2);
+	      return 0;
+	    }
+	  /* It is subl with 32 bit immediate.  */
+	  codestream_read ((unsigned char *)buf, 4);
+	  return extract_signed_integer (buf, 4);
+	}
+      else
+	{
+	  return (0);
+	}
+    }
+  else if (op == 0xc8)
+    {
+      char buf[2];
+      /* enter instruction: arg is 16 bit unsigned immed */
+      codestream_read ((unsigned char *)buf, 2);
+      codestream_get (); /* flush final byte of enter instruction */
+      return extract_unsigned_integer (buf, 2);
+    }
+  return (-1);
+}
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+int
+i386_frame_num_args (fi)
+     struct frame_info *fi;
+{
+#if 1
+  return -1;
+#else
+  /* This loses because not only might the compiler not be popping the
+     args right after the function call, it might be popping args from both
+     this call and a previous one, and we would say there are more args
+     than there really are.  */
+
+  int retpc;						
+  unsigned char op;					
+  struct frame_info *pfi;
+
+  /* on the 386, the instruction following the call could be:
+     popl %ecx        -  one arg
+     addl $imm, %esp  -  imm/4 args; imm may be 8 or 32 bits
+     anything else    -  zero args  */
+
+  int frameless;
+
+  FRAMELESS_FUNCTION_INVOCATION (fi, frameless);
+  if (frameless)
+    /* In the absence of a frame pointer, GDB doesn't get correct values
+       for nameless arguments.  Return -1, so it doesn't print any
+       nameless arguments.  */
+    return -1;
+
+  pfi = get_prev_frame_info (fi);			
+  if (pfi == 0)
+    {
+      /* Note:  this can happen if we are looking at the frame for
+	 main, because FRAME_CHAIN_VALID won't let us go into
+	 start.  If we have debugging symbols, that's not really
+	 a big deal; it just means it will only show as many arguments
+	 to main as are declared.  */
+      return -1;
+    }
+  else
+    {
+      retpc = pfi->pc;					
+      op = read_memory_integer (retpc, 1);			
+      if (op == 0x59)					
+	/* pop %ecx */			       
+	return 1;				
+      else if (op == 0x83)
+	{
+	  op = read_memory_integer (retpc+1, 1);	
+	  if (op == 0xc4)				
+	    /* addl $<signed imm 8 bits>, %esp */	
+	    return (read_memory_integer (retpc+2,1)&0xff)/4;
+	  else
+	    return 0;
+	}
+      else if (op == 0x81)
+	{ /* add with 32 bit immediate */
+	  op = read_memory_integer (retpc+1, 1);	
+	  if (op == 0xc4)				
+	    /* addl $<imm 32>, %esp */		
+	    return read_memory_integer (retpc+2, 4) / 4;
+	  else
+	    return 0;
+	}
+      else
+	{
+	  return 0;
+	}
+    }
+#endif
+}
+
+/*
+ * parse the first few instructions of the function to see
+ * what registers were stored.
+ *
+ * We handle these cases:
+ *
+ * The startup sequence can be at the start of the function,
+ * or the function can start with a branch to startup code at the end.
+ *
+ * %ebp can be set up with either the 'enter' instruction, or 
+ * 'pushl %ebp, movl %esp, %ebp' (enter is too slow to be useful,
+ * but was once used in the sys5 compiler)
+ *
+ * Local space is allocated just below the saved %ebp by either the
+ * 'enter' instruction, or by 'subl $<size>, %esp'.  'enter' has
+ * a 16 bit unsigned argument for space to allocate, and the
+ * 'addl' instruction could have either a signed byte, or
+ * 32 bit immediate.
+ *
+ * Next, the registers used by this function are pushed.  In
+ * the sys5 compiler they will always be in the order: %edi, %esi, %ebx
+ * (and sometimes a harmless bug causes it to also save but not restore %eax);
+ * however, the code below is willing to see the pushes in any order,
+ * and will handle up to 8 of them.
+ *
+ * If the setup sequence is at the end of the function, then the
+ * next instruction will be a branch back to the start.
+ */
+
+void
+i386_frame_find_saved_regs (fip, fsrp)
+     struct frame_info *fip;
+     struct frame_saved_regs *fsrp;
+{
+  long locals = -1;
+  unsigned char op;
+  CORE_ADDR dummy_bottom;
+  CORE_ADDR adr;
+  CORE_ADDR pc;
+  int i;
+  
+  memset (fsrp, 0, sizeof *fsrp);
+  
+  /* if frame is the end of a dummy, compute where the
+   * beginning would be
+   */
+  dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
+  
+  /* check if the PC is in the stack, in a dummy frame */
+  if (dummy_bottom <= fip->pc && fip->pc <= fip->frame) 
+    {
+      /* all regs were saved by push_call_dummy () */
+      adr = fip->frame;
+      for (i = 0; i < NUM_REGS; i++) 
+	{
+	  adr -= REGISTER_RAW_SIZE (i);
+	  fsrp->regs[i] = adr;
+	}
+      return;
+    }
+  
+  pc = get_pc_function_start (fip->pc);
+  if (pc != 0)
+    locals = i386_get_frame_setup (pc);
+  
+  if (locals >= 0) 
+    {
+      adr = fip->frame - 4 - locals;
+      for (i = 0; i < 8; i++) 
+	{
+	  op = codestream_get ();
+	  if (op < 0x50 || op > 0x57)
+	    break;
+#ifdef I386_REGNO_TO_SYMMETRY
+	  /* Dynix uses different internal numbering.  Ick.  */
+	  fsrp->regs[I386_REGNO_TO_SYMMETRY(op - 0x50)] = adr;
+#else
+	  fsrp->regs[op - 0x50] = adr;
+#endif
+	  adr -= 4;
+	}
+    }
+  
+  fsrp->regs[PC_REGNUM] = fip->frame + 4;
+  fsrp->regs[FP_REGNUM] = fip->frame;
+}
+
+/* return pc of first real instruction */
+
+int
+i386_skip_prologue (pc)
+     int pc;
+{
+  unsigned char op;
+  int i;
+  static unsigned char pic_pat[6] = { 0xe8, 0, 0, 0, 0, /* call   0x0 */
+				      0x5b,             /* popl   %ebx */
+				    };
+  CORE_ADDR pos;
+  
+  if (i386_get_frame_setup (pc) < 0)
+    return (pc);
+  
+  /* found valid frame setup - codestream now points to 
+   * start of push instructions for saving registers
+   */
+  
+  /* skip over register saves */
+  for (i = 0; i < 8; i++)
+    {
+      op = codestream_peek ();
+      /* break if not pushl inst */
+      if (op < 0x50 || op > 0x57) 
+	break;
+      codestream_get ();
+    }
+
+  /* The native cc on SVR4 in -K PIC mode inserts the following code to get
+     the address of the global offset table (GOT) into register %ebx.
+      call	0x0
+      popl	%ebx
+      movl	%ebx,x(%ebp)	(optional)
+      addl	y,%ebx
+     This code is with the rest of the prologue (at the end of the
+     function), so we have to skip it to get to the first real
+     instruction at the start of the function.  */
+     
+  pos = codestream_tell ();
+  for (i = 0; i < 6; i++)
+    {
+      op = codestream_get ();
+      if (pic_pat [i] != op)
+	break;
+    }
+  if (i == 6)
+    {
+      unsigned char buf[4];
+      long delta = 6;
+
+      op = codestream_get ();
+      if (op == 0x89)			/* movl %ebx, x(%ebp) */
+	{
+	  op = codestream_get ();
+	  if (op == 0x5d)		/* one byte offset from %ebp */
+	    {
+	      delta += 3;
+	      codestream_read (buf, 1);
+	    }
+	  else if (op == 0x9d)		/* four byte offset from %ebp */
+	    {
+	      delta += 6;
+	      codestream_read (buf, 4);
+	    }
+	  else				/* unexpected instruction */
+	      delta = -1;
+          op = codestream_get ();
+	}
+					/* addl y,%ebx */
+      if (delta > 0 && op == 0x81 && codestream_get () == 0xc3) 
+	{
+	    pos += delta + 6;
+	}
+    }
+  codestream_seek (pos);
+  
+  i386_follow_jump ();
+  
+  return (codestream_tell ());
+}
+
+void
+i386_push_dummy_frame ()
+{
+  CORE_ADDR sp = read_register (SP_REGNUM);
+  int regnum;
+  char regbuf[MAX_REGISTER_RAW_SIZE];
+  
+  sp = push_word (sp, read_register (PC_REGNUM));
+  sp = push_word (sp, read_register (FP_REGNUM));
+  write_register (FP_REGNUM, sp);
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    {
+      read_register_gen (regnum, regbuf);
+      sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
+    }
+  write_register (SP_REGNUM, sp);
+}
+
+void
+i386_pop_frame ()
+{
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR fp;
+  int regnum;
+  struct frame_saved_regs fsr;
+  char regbuf[MAX_REGISTER_RAW_SIZE];
+  
+  fp = FRAME_FP (frame);
+  get_frame_saved_regs (frame, &fsr);
+  for (regnum = 0; regnum < NUM_REGS; regnum++) 
+    {
+      CORE_ADDR adr;
+      adr = fsr.regs[regnum];
+      if (adr)
+	{
+	  read_memory (adr, regbuf, REGISTER_RAW_SIZE (regnum));
+	  write_register_bytes (REGISTER_BYTE (regnum), regbuf,
+				REGISTER_RAW_SIZE (regnum));
+	}
+    }
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
+  write_register (SP_REGNUM, fp + 8);
+  flush_cached_frames ();
+}
+
+#ifdef GET_LONGJMP_TARGET
+
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target(pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR sp, jb_addr;
+
+  sp = read_register (SP_REGNUM);
+
+  if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
+			  buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+
+#endif /* GET_LONGJMP_TARGET */
+
+void
+i386_extract_return_value(type, regbuf, valbuf)
+     struct type *type;
+     char regbuf[REGISTER_BYTES];
+     char *valbuf;
+{
+/* On AIX, floating point values are returned in floating point registers.  */
+#ifdef I386_AIX_TARGET
+  if (TYPE_CODE_FLT == TYPE_CODE(type))
+    {
+      double d;
+      /* 387 %st(0), gcc uses this */
+      floatformat_to_double (&floatformat_i387_ext,
+			     &regbuf[REGISTER_BYTE(FP0_REGNUM)],
+			     &d);
+      store_floating (valbuf, TYPE_LENGTH (type), d);
+    }
+  else
+#endif /* I386_AIX_TARGET */
+    { 
+      memcpy (valbuf, regbuf, TYPE_LENGTH (type)); 
+    }
+}
+
+#ifdef I386V4_SIGTRAMP_SAVED_PC
+/* Get saved user PC for sigtramp from the pushed ucontext on the stack
+   for all three variants of SVR4 sigtramps.  */
+
+CORE_ADDR
+i386v4_sigtramp_saved_pc (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR saved_pc_offset = 4;
+  char *name = NULL;
+
+  find_pc_partial_function (frame->pc, &name, NULL, NULL);
+  if (name)
+    {
+      if (STREQ (name, "_sigreturn"))
+	saved_pc_offset = 132 + 14 * 4;
+      else if (STREQ (name, "_sigacthandler"))
+	saved_pc_offset = 80 + 14 * 4;
+      else if (STREQ (name, "sigvechandler"))
+	saved_pc_offset = 120 + 14 * 4;
+    }
+
+  if (frame->next)
+    return read_memory_integer (frame->next->frame + saved_pc_offset, 4);
+  return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4);
+}
+#endif /* I386V4_SIGTRAMP_SAVED_PC */
+
+#ifdef STATIC_TRANSFORM_NAME
+/* SunPRO encodes the static variables.  This is not related to C++ mangling,
+   it is done for C too.  */
+
+char *
+sunpro_static_transform_name (name)
+     char *name;
+{
+  char *p;
+  if (IS_STATIC_TRANSFORM_NAME (name))
+    {
+      /* For file-local statics there will be a period, a bunch
+	 of junk (the contents of which match a string given in the
+	 N_OPT), a period and the name.  For function-local statics
+	 there will be a bunch of junk (which seems to change the
+	 second character from 'A' to 'B'), a period, the name of the
+	 function, and the name.  So just skip everything before the
+	 last period.  */
+      p = strrchr (name, '.');
+      if (p != NULL)
+	name = p + 1;
+    }
+  return name;
+}
+#endif /* STATIC_TRANSFORM_NAME */
+
+
+
+/* Stuff for WIN32 PE style DLL's but is pretty generic really. */
+
+CORE_ADDR
+skip_trampoline_code (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */
+    {
+      unsigned long indirect = read_memory_unsigned_integer (pc+2, 4);
+      struct minimal_symbol *indsym =
+	indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
+      char *symname = indsym ? SYMBOL_NAME(indsym) : 0;
+
+      if (symname) 
+	{
+	  if (strncmp (symname,"__imp_", 6) == 0
+	      || strncmp (symname,"_imp_", 5) == 0)
+	    return name ? 1 : read_memory_unsigned_integer (indirect, 4);
+	}
+    }
+  return 0;			/* not a trampoline */
+}
+
+static int
+gdb_print_insn_i386 (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info * info;
+{
+  if (disassembly_flavor == att_flavor)
+    return print_insn_i386_att (memaddr, info);
+  else if (disassembly_flavor == intel_flavor)
+    return print_insn_i386_intel (memaddr, info);
+}
+
+void
+_initialize_i386_tdep ()
+{
+  tm_print_insn = gdb_print_insn_i386;
+  tm_print_insn_info.mach = bfd_lookup_arch (bfd_arch_i386, 0)->mach;
+
+  /* Add the variable that controls the disassembly flavor */
+  add_show_from_set(
+	    add_set_enum_cmd ("disassembly-flavor", no_class,
+				  valid_flavors,
+				  (char *) &disassembly_flavor,
+				  "Set the disassembly flavor, the valid values are \"att\" and \"intel\", \
+and the default value is \"att\".",
+				  &setlist),
+	    &showlist);
+
+  
+}
diff --git a/gdb/i386aix-nat.c b/gdb/i386aix-nat.c
new file mode 100644
index 0000000..20e656e
--- /dev/null
+++ b/gdb/i386aix-nat.c
@@ -0,0 +1,362 @@
+/* Intel 386 native support.
+   Copyright (C) 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcore.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/user.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#include <stddef.h>
+#include <sys/ptrace.h>
+
+/* Does AIX define this in <errno.h>?  */
+extern int errno;
+
+#ifdef HAVE_SYS_REG_H
+#include <sys/reg.h>
+#endif
+
+#include "floatformat.h"
+
+#include "target.h"
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+
+/* this table must line up with REGISTER_NAMES in tm-i386v.h */
+/* symbols like 'EAX' come from <sys/reg.h> */
+static int regmap[] = 
+{
+  EAX, ECX, EDX, EBX,
+  USP, EBP, ESI, EDI,
+  EIP, EFL, CS, SS,
+  DS, ES, FS, GS,
+};
+
+/* blockend is the value of u.u_ar0, and points to the
+ * place where GS is stored
+ */
+
+int
+i386_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+#if 0
+  /* this will be needed if fp registers are reinstated */
+  /* for now, you can look at them with 'info float'
+   * sys5 wont let you change them with ptrace anyway
+   */
+  if (regnum >= FP0_REGNUM && regnum <= FP7_REGNUM) 
+    {
+      int ubase, fpstate;
+      struct user u;
+      ubase = blockend + 4 * (SS + 1) - KSTKSZ;
+      fpstate = ubase + ((char *)&u.u_fpstate - (char *)&u);
+      return (fpstate + 0x1c + 10 * (regnum - FP0_REGNUM));
+    } 
+  else
+#endif
+    return (blockend + 4 * regmap[regnum]);
+  
+}
+
+/* The code below only work on the aix ps/2 (i386-ibm-aix) -
+ * mtranle@paris - Sat Apr 11 10:34:12 1992
+ */
+
+struct env387 
+{
+  unsigned short control;
+  unsigned short r0;
+  unsigned short status;
+  unsigned short r1;
+  unsigned short tag;
+  unsigned short r2;
+  unsigned long eip;
+  unsigned short code_seg;
+  unsigned short opcode;
+  unsigned long operand;
+  unsigned short operand_seg;
+  unsigned short r3;
+  unsigned char regs[8][10];
+};
+
+static
+print_387_status (status, ep)
+     unsigned short status;
+     struct env387 *ep;
+{
+  int i;
+  int bothstatus;
+  int top;
+  int fpreg;
+  unsigned char *p;
+  
+  bothstatus = ((status != 0) && (ep->status != 0));
+  if (status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("u: ");
+      print_387_status_word (status);
+    }
+  
+  if (ep->status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("e: ");
+      print_387_status_word (ep->status);
+    }
+  
+  print_387_control_word (ep->control);
+  printf_unfiltered ("last exception: ");
+  printf_unfiltered ("opcode %s; ", local_hex_string(ep->opcode));
+  printf_unfiltered ("pc %s:", local_hex_string(ep->code_seg));
+  printf_unfiltered ("%s; ", local_hex_string(ep->eip));
+  printf_unfiltered ("operand %s", local_hex_string(ep->operand_seg));
+  printf_unfiltered (":%s\n", local_hex_string(ep->operand));
+
+  top = ((ep->status >> 11) & 7);
+
+  printf_unfiltered ("regno  tag  msb              lsb  value\n");
+  for (fpreg = 7; fpreg >= 0; fpreg--) 
+    {
+      double val;
+
+      printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
+
+      switch ((ep->tag >> ((7 - fpreg) * 2)) & 3) 
+	{
+	case 0: printf_unfiltered ("valid "); break;
+	case 1: printf_unfiltered ("zero  "); break;
+	case 2: printf_unfiltered ("trap  "); break;
+	case 3: printf_unfiltered ("empty "); break;
+	}
+      for (i = 9; i >= 0; i--)
+	printf_unfiltered ("%02x", ep->regs[fpreg][i]);
+      
+      i387_to_double ((char *)ep->regs[fpreg], (char *)&val);
+      printf_unfiltered ("  %#g\n", val);
+    }
+}
+
+static struct env387 core_env387;
+
+void
+i386_float_info ()
+{
+  struct env387 fps;
+  int fpsaved = 0;
+  /* We need to reverse the order of the registers.  Apparently AIX stores
+     the highest-numbered ones first.  */
+  struct env387 fps_fixed;
+  int i;
+
+  if (inferior_pid)
+    {
+      char buf[10];
+      unsigned short status;
+
+      ptrace (PT_READ_FPR, inferior_pid, buf, offsetof(struct env387, status));
+      memcpy (&status, buf, sizeof (status));
+      fpsaved = status;
+    }
+  else
+    {
+      if ((fpsaved = core_env387.status) != 0)
+	memcpy(&fps, &core_env387, sizeof(fps));
+    }
+  
+  if (fpsaved == 0) 
+    {
+      printf_unfiltered ("no floating point status saved\n");
+      return;
+    }
+
+  if (inferior_pid)
+    {
+      int offset;
+      for (offset = 0; offset < sizeof(fps); offset += 10)
+	{
+	  char buf[10];
+	  ptrace (PT_READ_FPR, inferior_pid, buf, offset);
+	  memcpy ((char *)&fps.control + offset, buf,
+		  MIN(10, sizeof(fps) - offset));
+	}
+    } 
+  fps_fixed = fps;
+  for (i = 0; i < 8; ++i)
+    memcpy (fps_fixed.regs[i], fps.regs[7 - i], 10);
+  print_387_status (0, &fps_fixed);
+}
+
+/* Fetch one register.  */
+static void
+fetch_register (regno)
+     int regno;
+{
+  char buf[MAX_REGISTER_RAW_SIZE];
+  if (regno < FP0_REGNUM)
+    *(int *)buf = ptrace (PT_READ_GPR, inferior_pid,
+			  PT_REG(regmap[regno]), 0, 0);
+  else
+    ptrace (PT_READ_FPR, inferior_pid, buf,
+	    (regno - FP0_REGNUM)*10 + offsetof(struct env387, regs));
+  supply_register (regno, buf);
+}
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno < 0)
+    for (regno = 0; regno < NUM_REGS; regno++)
+      fetch_register (regno);
+  else
+    fetch_register (regno);
+}
+
+/* store one register */
+static void
+store_register (regno)
+     int regno;
+{
+  char buf[80];
+  extern char registers[];
+  errno = 0;
+  if (regno < FP0_REGNUM)
+    ptrace (PT_WRITE_GPR, inferior_pid, PT_REG(regmap[regno]),
+	    *(int *) &registers[REGISTER_BYTE (regno)], 0);
+  else
+    ptrace (PT_WRITE_FPR, inferior_pid, &registers[REGISTER_BYTE (regno)],
+	    (regno - FP0_REGNUM)*10 + offsetof(struct env387, regs));
+
+  if (errno != 0)
+    {
+      sprintf (buf, "writing register number %d", regno);
+      perror_with_name (buf);
+    }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  if (regno < 0)
+    for (regno = 0; regno < NUM_REGS; regno++)
+      store_register (regno);
+  else
+    store_register (regno);
+}
+
+#ifndef CD_AX			/* defined in sys/i386/coredump.h */
+# define CD_AX	0
+# define CD_BX	1
+# define CD_CX	2
+# define CD_DX	3
+# define CD_SI	4
+# define CD_DI	5
+# define CD_BP	6
+# define CD_SP	7
+# define CD_FL	8
+# define CD_IP	9
+# define CD_CS	10
+# define CD_DS	11
+# define CD_ES	12
+# define CD_FS	13
+# define CD_GS	14
+# define CD_SS	15
+#endif
+
+/*
+ * The order here in core_regmap[] has to be the same as in 
+ * regmap[] above.
+ */
+static int core_regmap[] = 
+{
+  CD_AX, CD_CX, CD_DX, CD_BX,
+  CD_SP, CD_BP, CD_SI, CD_DI,
+  CD_IP, CD_FL, CD_CS, CD_SS,
+  CD_DS, CD_ES, CD_FS, CD_GS,
+};
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* ignored */
+{
+
+  if (which == 0)
+    {
+      /* Integer registers */
+
+#define cd_regs(n) ((int *)core_reg_sect)[n]
+#define regs(n) *((int *) &registers[REGISTER_BYTE (n)])
+
+      int i;
+      for (i = 0; i < FP0_REGNUM; i++)
+	regs(i) = cd_regs(core_regmap[i]);
+    }
+  else if (which == 2)
+    {
+      /* Floating point registers */
+
+      if (core_reg_size >= sizeof (core_env387))
+	memcpy (&core_env387, core_reg_sect, core_reg_size);
+      else
+	fprintf_unfiltered (gdb_stderr, "Couldn't read float regs from core file\n");
+    }
+}
+
+
+/* Register that we are able to handle i386aix core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns i386aix_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_i386aix ()
+{
+  add_core_fns (&i386aix_core_fns);
+}
diff --git a/gdb/i386b-nat.c b/gdb/i386b-nat.c
new file mode 100644
index 0000000..e784773
--- /dev/null
+++ b/gdb/i386b-nat.c
@@ -0,0 +1,285 @@
+/* Native-dependent code for BSD Unix running on i386's, for GDB.
+   Copyright 1988, 1989, 1991, 1992, 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+#ifdef FETCH_INFERIOR_REGISTERS
+#include <sys/types.h>
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+#include <machine/frame.h>
+#include "inferior.h"
+
+void
+fetch_inferior_registers(regno)
+     int regno;
+{
+  struct reg inferior_registers;
+
+  ptrace (PT_GETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+  memcpy (&registers[REGISTER_BYTE (0)], &inferior_registers, 4*NUM_REGS);
+  registers_fetched ();
+}
+
+void
+store_inferior_registers(regno)
+     int regno;
+{
+  struct reg inferior_registers;
+
+  memcpy (&inferior_registers, &registers[REGISTER_BYTE (0)], 4*NUM_REGS);
+  ptrace (PT_SETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+}
+
+struct md_core {
+  struct reg intreg;
+  struct fpreg freg;
+};
+
+void
+fetch_core_registers (core_reg_sect, core_reg_size, which, ignore)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR ignore;
+{
+  struct md_core *core_reg = (struct md_core *)core_reg_sect;
+
+  /* integer registers */
+  memcpy(&registers[REGISTER_BYTE (0)], &core_reg->intreg,
+	 sizeof(struct reg));
+  /* floating point registers */
+  /* XXX */
+}
+
+#else
+
+#include <machine/reg.h>
+
+/* this table must line up with REGISTER_NAMES in tm-i386.h */
+/* symbols like 'tEAX' come from <machine/reg.h> */
+static int tregmap[] = 
+{
+  tEAX, tECX, tEDX, tEBX,
+  tESP, tEBP, tESI, tEDI,
+  tEIP, tEFLAGS, tCS, tSS
+};
+
+#ifdef sEAX
+static int sregmap[] = 
+{
+  sEAX, sECX, sEDX, sEBX,
+  sESP, sEBP, sESI, sEDI,
+  sEIP, sEFLAGS, sCS, sSS
+};
+#else /* No sEAX */
+
+/* FreeBSD has decided to collapse the s* and t* symbols.  So if the s*
+   ones aren't around, use the t* ones for sregmap too.  */
+
+static int sregmap[] = 
+{
+  tEAX, tECX, tEDX, tEBX,
+  tESP, tEBP, tESI, tEDI,
+  tEIP, tEFLAGS, tCS, tSS
+};
+#endif /* No sEAX */
+
+/* blockend is the value of u.u_ar0, and points to the
+   place where ES is stored.  */
+
+int
+i386_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+  /* The following condition is a kludge to get at the proper register map
+     depending upon the state of pcb_flag.
+     The proper condition would be
+     if (u.u_pcb.pcb_flag & FM_TRAP)
+     but that would require a ptrace call here and wouldn't work
+     for corefiles.  */
+
+  if (blockend < 0x1fcc)
+    return (blockend + 4 * tregmap[regnum]);
+  else
+    return (blockend + 4 * sregmap[regnum]);
+}
+
+#endif /* !FETCH_INFERIOR_REGISTERS */
+
+#ifdef FLOAT_INFO
+#include "expression.h"
+#include "language.h"			/* for local_hex_string */
+#include "floatformat.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include <a.out.h>
+
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/uio.h>
+#define curpcb Xcurpcb	/* XXX avoid leaking declaration from pcb.h */
+#include <sys/user.h>
+#undef curpcb
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/ptrace.h>
+
+extern void print_387_control_word ();		/* i387-tdep.h */
+extern void print_387_status_word ();
+
+#define	fpstate		save87
+#define	U_FPSTATE(u)	u.u_pcb.pcb_savefpu
+
+struct env387 
+{
+  unsigned short control;
+  unsigned short r0;
+  unsigned short status;
+  unsigned short r1;
+  unsigned short tag;
+  unsigned short r2;
+  unsigned long eip;
+  unsigned short code_seg;
+  unsigned short opcode;
+  unsigned long operand;
+  unsigned short operand_seg;
+  unsigned short r3;
+  unsigned char regs[8][10];
+};
+
+static void
+print_387_status (status, ep)
+     unsigned short status;
+     struct env387 *ep;
+{
+  int i;
+  int bothstatus;
+  int top;
+  int fpreg;
+  
+  bothstatus = ((status != 0) && (ep->status != 0));
+  if (status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("u: ");
+      print_387_status_word ((unsigned int)status);
+    }
+  
+  if (ep->status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("e: ");
+      print_387_status_word ((unsigned int)ep->status);
+    }
+  
+  print_387_control_word ((unsigned int)ep->control);
+  printf_unfiltered ("last exception: ");
+  printf_unfiltered ("opcode %s; ", local_hex_string(ep->opcode));
+  printf_unfiltered ("pc %s:", local_hex_string(ep->code_seg));
+  printf_unfiltered ("%s; ", local_hex_string(ep->eip));
+  printf_unfiltered ("operand %s", local_hex_string(ep->operand_seg));
+  printf_unfiltered (":%s\n", local_hex_string(ep->operand));
+
+  top = (ep->status >> 11) & 7;
+  
+  printf_unfiltered ("regno     tag  msb              lsb  value\n");
+  for (fpreg = 7; fpreg >= 0; fpreg--) 
+    {
+      double val;
+      
+      printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg); 
+
+      switch ((ep->tag >> (fpreg * 2)) & 3) 
+	{
+	case 0: printf_unfiltered ("valid "); break;
+	case 1: printf_unfiltered ("zero  "); break;
+	case 2: printf_unfiltered ("trap  "); break;
+	case 3: printf_unfiltered ("empty "); break;
+	}
+      for (i = 9; i >= 0; i--)
+	printf_unfiltered ("%02x", ep->regs[fpreg][i]);
+      
+      floatformat_to_double(&floatformat_i387_ext, (char *) ep->regs[fpreg], 
+			      &val);
+      printf_unfiltered ("  %g\n", val);
+    }
+}
+
+i386_float_info ()
+{
+  struct user u; /* just for address computations */
+  int i;
+  /* fpstate defined in <sys/user.h> */
+  struct fpstate *fpstatep;
+  char buf[sizeof (struct fpstate) + 2 * sizeof (int)];
+  unsigned int uaddr;
+  char fpvalid;
+  unsigned int rounded_addr;
+  unsigned int rounded_size;
+  /*extern int corechan;*/
+  int skip;
+  extern int inferior_pid;
+  
+  uaddr = (char *)&U_FPSTATE(u) - (char *)&u;
+  if (inferior_pid) 
+    {
+      int *ip;
+      
+      rounded_addr = uaddr & -sizeof (int);
+      rounded_size = (((uaddr + sizeof (struct fpstate)) - uaddr) +
+		      sizeof (int) - 1) / sizeof (int);
+      skip = uaddr - rounded_addr;
+      
+      ip = (int *)buf;
+      for (i = 0; i < rounded_size; i++) 
+	{
+	  *ip++ = ptrace (PT_READ_U, inferior_pid, (caddr_t)rounded_addr, 0);
+	  rounded_addr += sizeof (int);
+	}
+    } 
+  else 
+    {
+      printf("float info: can't do a core file (yet)\n");
+      return;
+#if 0
+      if (lseek (corechan, uaddr, 0) < 0)
+	perror_with_name ("seek on core file");
+      if (myread (corechan, buf, sizeof (struct fpstate)) < 0) 
+	perror_with_name ("read from core file");
+      skip = 0;
+#endif
+    }
+  
+  print_387_status (0, (struct env387 *)buf);
+}
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+#endif
diff --git a/gdb/i386gnu-nat.c b/gdb/i386gnu-nat.c
new file mode 100644
index 0000000..6ed92c1
--- /dev/null
+++ b/gdb/i386gnu-nat.c
@@ -0,0 +1,357 @@
+/* Low level interface to I386 running the GNU Hurd
+   Copyright (C) 1992, 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "floatformat.h"
+
+#include <stdio.h>
+#include <errno.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+#include "gnu-nat.h"
+
+/* Hmmm... Should this not be here?
+ * Now for i386_float_info() target_has_execution
+ */
+#include <target.h>
+
+/* @@@ Should move print_387_status() to i387-tdep.c */
+extern void print_387_control_word ();		/* i387-tdep.h */
+extern void print_387_status_word ();
+
+/* Find offsets to thread states at compile time.
+ * If your compiler does not grok this, calculate offsets
+ * offsets yourself and use them (or get a compatible compiler :-)
+ */
+
+#define  REG_OFFSET(reg) (int)(&((struct i386_thread_state *)0)->reg)
+
+/* at reg_offset[i] is the offset to the i386_thread_state
+ * location where the gdb registers[i] is stored.
+ */
+
+static int reg_offset[] = 
+{
+  REG_OFFSET(eax),  REG_OFFSET(ecx), REG_OFFSET(edx), REG_OFFSET(ebx),
+  REG_OFFSET(uesp), REG_OFFSET(ebp), REG_OFFSET(esi), REG_OFFSET(edi),
+  REG_OFFSET(eip),  REG_OFFSET(efl), REG_OFFSET(cs),  REG_OFFSET(ss),
+  REG_OFFSET(ds),   REG_OFFSET(es),  REG_OFFSET(fs),  REG_OFFSET(gs)
+};
+
+#define REG_ADDR(state,regnum) ((char *)(state)+reg_offset[regnum])
+
+/* Fetch COUNT contiguous registers from thread STATE starting from REGNUM
+ * Caller knows that the regs handled in one transaction are of same size.
+ */
+#define FETCH_REGS(state, regnum, count) \
+  memcpy (&registers[REGISTER_BYTE (regnum)], \
+	  REG_ADDR (state, regnum), \
+	  count * REGISTER_RAW_SIZE (regnum))
+
+/* Store COUNT contiguous registers to thread STATE starting from REGNUM */
+#define STORE_REGS(state, regnum, count) \
+  memcpy (REG_ADDR (state, regnum), \
+	  &registers[REGISTER_BYTE (regnum)], \
+	  count * REGISTER_RAW_SIZE (regnum))
+
+/*
+ * Fetch inferiors registers for gdb.
+ * REG specifies which (as gdb views it) register, -1 for all.
+ */
+void
+gnu_fetch_registers (int reg)
+{
+  struct proc *thread;
+  thread_state_t state;
+  
+  inf_update_procs (current_inferior); /* Make sure we know about new threads.  */
+
+  thread = inf_tid_to_thread (current_inferior, inferior_pid);
+  if (! thread)
+    error ("fetch inferior registers: %d: Invalid thread", inferior_pid);
+
+  state = proc_get_state (thread, 0);
+
+  if (! state)
+    warning ("Couldn't fetch register %s from %s (invalid thread).",
+	     REGISTER_NAME (reg), proc_string (thread));
+  else if (reg >= 0)
+    {
+      proc_debug (thread, "fetching register: %s", REGISTER_NAME (reg));
+      supply_register (reg, REG_ADDR(state, reg));
+      thread->fetched_regs |= (1 << reg);
+    }
+  else
+    {
+      proc_debug (thread, "fetching all registers");
+      for (reg = 0; reg < NUM_REGS; reg++) 
+	supply_register (reg, REG_ADDR(state, reg));
+      thread->fetched_regs = ~0;
+    }
+}
+
+/* Store our register values back into the inferior.
+ * If REG is -1, do this for all registers.
+ * Otherwise, REG specifies which register
+ *
+ * On mach3 all registers are always saved in one call.
+ */
+void
+gnu_store_registers (reg)
+     int reg;
+{
+  struct proc *thread;
+  int was_aborted, was_valid;
+  thread_state_t state;
+  thread_state_data_t old_state;
+  
+  inf_update_procs (current_inferior); /* Make sure we know about new threads.  */
+
+  thread = inf_tid_to_thread (current_inferior, inferior_pid);
+  if (! thread)
+    error ("store inferior registers: %d: Invalid thread", inferior_pid);
+
+  proc_debug (thread, "storing register %s.", REGISTER_NAME (reg));
+
+  was_aborted = thread->aborted;
+  was_valid = thread->state_valid;
+  if (! was_aborted && was_valid)
+    bcopy (&thread->state, &old_state, sizeof (old_state));
+
+  state = proc_get_state (thread, 1);
+
+  if (! state)
+    warning ("Couldn't store register %s from %s (invalid thread).",
+	     REGISTER_NAME (reg), proc_string (thread));
+  else
+    {
+      if (! was_aborted && was_valid)
+	/* See which registers have changed after aborting the thread.  */
+	{
+	  int check_reg;
+	  for (check_reg = 0; check_reg < NUM_REGS; check_reg++)
+	    if ((thread->fetched_regs & (1 << check_reg))
+		&& bcmp (REG_ADDR (&old_state, check_reg),
+			 REG_ADDR (state, check_reg),
+			 REGISTER_RAW_SIZE (check_reg)))
+	      /* Register CHECK_REG has changed!  Ack!  */
+	      {
+		warning ("Register %s changed after thread was aborted.",
+			 REGISTER_NAME (check_reg));
+		if (reg >= 0 && reg != check_reg)
+		  /* Update gdb's copy of the register.  */
+		  supply_register (check_reg, REG_ADDR (state, check_reg));
+		else
+		  warning ("... also writing this register!  Suspicious...");
+	      }
+	}
+
+      if (reg >= 0)
+	{
+	  proc_debug (thread, "storing register: %s", REGISTER_NAME (reg));
+	  STORE_REGS (state, reg, 1);
+	}
+      else
+	{
+	  proc_debug (thread, "storing all registers");
+	  for (reg = 0; reg < NUM_REGS; reg++) 
+	    STORE_REGS (state, reg, 1);
+	}
+    }
+}
+
+/* jtv@hut.fi: I copied and modified this 387 code from
+ * gdb/i386-xdep.c. Modifications for Mach 3.0.
+ *
+ * i387 status dumper. See also i387-tdep.c
+ */
+struct env387 
+{
+  unsigned short control;
+  unsigned short r0;
+  unsigned short status;
+  unsigned short r1;
+  unsigned short tag;
+  unsigned short r2;
+  unsigned long eip;
+  unsigned short code_seg;
+  unsigned short opcode;
+  unsigned long operand;
+  unsigned short operand_seg;
+  unsigned short r3;
+  unsigned char regs[8][10];
+};
+/* This routine is machine independent?
+ * Should move it to i387-tdep.c but you need to export struct env387
+ */
+static
+print_387_status (status, ep)
+     unsigned short status;
+     struct env387 *ep;
+{
+  int i;
+  int bothstatus;
+  int top;
+  int fpreg;
+  unsigned char *p;
+  
+  bothstatus = ((status != 0) && (ep->status != 0));
+  if (status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("u: ");
+      print_387_status_word (status);
+    }
+  
+  if (ep->status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("e: ");
+      print_387_status_word (ep->status);
+    }
+  
+  print_387_control_word (ep->control);
+  printf_unfiltered ("last exception: ");
+  printf_unfiltered ("opcode %s; ", local_hex_string(ep->opcode));
+  printf_unfiltered ("pc %s:", local_hex_string(ep->code_seg));
+  printf_unfiltered ("%s; ", local_hex_string(ep->eip));
+  printf_unfiltered ("operand %s", local_hex_string(ep->operand_seg));
+  printf_unfiltered (":%s\n", local_hex_string(ep->operand));
+  
+  top = (ep->status >> 11) & 7;
+  
+  printf_unfiltered ("regno  tag  msb              lsb  value\n");
+  for (fpreg = 7; fpreg >= 0; fpreg--) 
+    {
+      double val;
+      
+      printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
+      
+      switch ((ep->tag >> (fpreg * 2)) & 3) 
+	{
+	case 0: printf_unfiltered ("valid "); break;
+	case 1: printf_unfiltered ("zero  "); break;
+	case 2: printf_unfiltered ("trap  "); break;
+	case 3: printf_unfiltered ("empty "); break;
+	}
+      for (i = 9; i >= 0; i--)
+	printf_unfiltered ("%02x", ep->regs[fpreg][i]);
+      
+      floatformat_to_double (&floatformat_i387_ext, (char *)ep->regs[fpreg],
+			       &val);
+      printf_unfiltered ("  %g\n", val);
+    }
+  if (ep->r0)
+    printf_unfiltered ("warning: reserved0 is %s\n", local_hex_string(ep->r0));
+  if (ep->r1)
+    printf_unfiltered ("warning: reserved1 is %s\n", local_hex_string(ep->r1));
+  if (ep->r2)
+    printf_unfiltered ("warning: reserved2 is %s\n", local_hex_string(ep->r2));
+  if (ep->r3)
+    printf_unfiltered ("warning: reserved3 is %s\n", local_hex_string(ep->r3));
+}
+	
+/*
+ * values that go into fp_kind (from <i386/fpreg.h>)
+ */
+#define FP_NO   0       /* no fp chip, no emulator (no fp support)      */
+#define FP_SW   1       /* no fp chip, using software emulator          */
+#define FP_HW   2       /* chip present bit                             */
+#define FP_287  2       /* 80287 chip present                           */
+#define FP_387  3       /* 80387 chip present                           */
+
+typedef struct fpstate {
+#if 1
+  unsigned char	state[FP_STATE_BYTES]; /* "hardware" state */
+#else
+  struct env387	state;	/* Actually this */
+#endif
+  int status;		/* Duplicate status */
+} *fpstate_t;
+
+/* Mach 3 specific routines.
+ */
+static int
+get_i387_state (fstate)
+     struct fpstate *fstate;
+{
+  error_t err;
+  thread_state_data_t state;
+  unsigned int fsCnt = i386_FLOAT_STATE_COUNT;
+  struct i386_float_state *fsp;
+  struct proc *thread = inf_tid_to_thread (current_inferior, inferior_pid);
+  
+  if (!thread)
+    error ("get_i387_state: Invalid thread");
+
+  proc_abort (thread, 0);	/* Make sure THREAD's in a reasonable state. */
+
+  err = thread_get_state (thread->port, i386_FLOAT_STATE, state, &fsCnt);
+  if (err)
+    {
+      warning ("Can not get live floating point state: %s",
+	       mach_error_string (err));
+      return 0;
+    }
+
+  fsp = (struct i386_float_state *)state;
+  /* The 387 chip (also 486 counts) or a software emulator? */
+  if (!fsp->initialized || (fsp->fpkind != FP_387 && fsp->fpkind != FP_SW))
+    return 0;
+
+  /* Clear the target then copy thread's float state there.
+     Make a copy of the status word, for some reason?
+   */
+  memset (fstate, 0, sizeof (struct fpstate));
+
+  fstate->status = fsp->exc_status;
+
+  memcpy (fstate->state, (char *)&fsp->hw_state, FP_STATE_BYTES);
+
+  return 1;
+}
+
+/*
+ * This is called by "info float" command
+ */
+void
+i386_mach3_float_info()
+{
+  char buf [sizeof (struct fpstate) + 2 * sizeof (int)];
+  int valid = 0;
+  fpstate_t fps;
+  
+  if (target_has_execution)
+    valid = get_i387_state (buf);
+
+  if (!valid) 
+    {
+      warning ("no floating point status saved");
+      return;
+    }
+  
+  fps = (fpstate_t) buf;
+
+  print_387_status (fps->status, (struct env387 *)fps->state);
+}
diff --git a/gdb/i386ly-tdep.c b/gdb/i386ly-tdep.c
new file mode 100644
index 0000000..101f4ed
--- /dev/null
+++ b/gdb/i386ly-tdep.c
@@ -0,0 +1,43 @@
+/* Target-dependent code for Intel 386 running LynxOS.
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+
+/* Return the PC of the caller from the call frame.  Assumes the subr prologue
+   has already been executed, and the frame pointer setup.  If this is the
+   outermost frame, we check to see if we are in a system call by examining the
+   previous instruction.  If so, then the return PC is actually at SP+4 because
+   system calls use a different calling sequence.  */
+
+CORE_ADDR
+i386lynx_saved_pc_after_call (frame)
+     struct frame_info *frame;
+{
+  char opcode[7];
+  static const unsigned char call_inst[] = {0x9a, 0, 0, 0, 0, 8, 0}; /* lcall 0x8,0x0 */
+
+  read_memory (frame->pc - 7, opcode, 7);
+  if (memcmp (opcode, call_inst, 7) == 0)
+    return read_memory_integer (read_register (SP_REGNUM) + 4, 4);
+
+  return read_memory_integer (read_register (SP_REGNUM), 4);
+}
diff --git a/gdb/i386m3-nat.c b/gdb/i386m3-nat.c
new file mode 100644
index 0000000..c0257b1
--- /dev/null
+++ b/gdb/i386m3-nat.c
@@ -0,0 +1,421 @@
+/* Low level interface to I386 running mach 3.0.
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "floatformat.h"
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+/* Hmmm... Should this not be here?
+ * Now for i386_float_info() target_has_execution
+ */
+#include <target.h>
+
+/* This mess is duplicated in bfd/i386mach3.h
+ *
+ * This is an ugly way to hack around the incorrect
+ * definition of UPAGES in i386/machparam.h.
+ *
+ * The definition should specify the size reserved
+ * for "struct user" in core files in PAGES,
+ * but instead it gives it in 512-byte core-clicks
+ * for i386 and i860.
+ */
+#include <sys/param.h>
+#if UPAGES == 16
+#define UAREA_SIZE ctob(UPAGES)
+#elif UPAGES == 2
+#define UAREA_SIZE (NBPG*UPAGES)
+#else
+FIXME!! UPAGES is neither 2 nor 16
+#endif
+
+/* @@@ Should move print_387_status() to i387-tdep.c */
+extern void print_387_control_word ();		/* i387-tdep.h */
+extern void print_387_status_word ();
+
+#define private static
+
+
+/* Find offsets to thread states at compile time.
+ * If your compiler does not grok this, calculate offsets
+ * offsets yourself and use them (or get a compatible compiler :-)
+ */
+
+#define  REG_OFFSET(reg) (int)(&((struct i386_thread_state *)0)->reg)
+
+/* at reg_offset[i] is the offset to the i386_thread_state
+ * location where the gdb registers[i] is stored.
+ */
+
+static int reg_offset[] = 
+{
+  REG_OFFSET(eax),  REG_OFFSET(ecx), REG_OFFSET(edx), REG_OFFSET(ebx),
+  REG_OFFSET(uesp), REG_OFFSET(ebp), REG_OFFSET(esi), REG_OFFSET(edi),
+  REG_OFFSET(eip),  REG_OFFSET(efl), REG_OFFSET(cs),  REG_OFFSET(ss),
+  REG_OFFSET(ds),   REG_OFFSET(es),  REG_OFFSET(fs),  REG_OFFSET(gs)
+};
+
+#define REG_ADDRESS(state,regnum) ((char *)(state)+reg_offset[regnum])
+
+/* Fetch COUNT contiguous registers from thread STATE starting from REGNUM
+ * Caller knows that the regs handled in one transaction are of same size.
+ */
+#define FETCH_REGS(state, regnum, count) \
+  memcpy (&registers[REGISTER_BYTE (regnum)], \
+	  REG_ADDRESS (state, regnum), \
+	  count*REGISTER_SIZE)
+
+/* Store COUNT contiguous registers to thread STATE starting from REGNUM */
+#define STORE_REGS(state, regnum, count) \
+  memcpy (REG_ADDRESS (state, regnum), \
+	  &registers[REGISTER_BYTE (regnum)], \
+	  count*REGISTER_SIZE)
+
+/*
+ * Fetch inferiors registers for gdb.
+ * REGNO specifies which (as gdb views it) register, -1 for all.
+ */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = i386_THREAD_STATE_COUNT;
+  int index;
+  
+  if (! MACH_PORT_VALID (current_thread))
+    error ("fetch inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  ret = thread_get_state (current_thread,
+			  i386_THREAD_STATE,
+			  state,
+			  &stateCnt);
+
+  if (ret != KERN_SUCCESS)
+    warning ("fetch_inferior_registers: %s ",
+	     mach_error_string (ret));
+#if 0
+  /* It may be more effective to store validate all of them,
+   * since we fetched them all anyway
+   */
+  else if (regno != -1)
+    supply_register (regno, (char *)state+reg_offset[regno]);
+#endif
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	supply_register (index, (char *)state+reg_offset[index]);
+    }
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
+
+/* Store our register values back into the inferior.
+ * If REGNO is -1, do this for all registers.
+ * Otherwise, REGNO specifies which register
+ *
+ * On mach3 all registers are always saved in one call.
+ */
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = i386_THREAD_STATE_COUNT;
+  register int index;
+
+  if (! MACH_PORT_VALID (current_thread))
+    error ("store inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  /* Fetch the state of the current thread */
+  ret = thread_get_state (current_thread,
+			  i386_THREAD_STATE,
+			  state,
+			  &stateCnt);
+
+   if (ret != KERN_SUCCESS) 
+    {
+      warning ("store_inferior_registers (get): %s",
+	       mach_error_string (ret));
+      if (must_suspend_thread)
+	setup_thread (current_thread, 0);
+      return;
+    }
+
+  /* move gdb's registers to thread's state
+   *
+   * Since we save all registers anyway, save the ones
+   * that gdb thinks are valid (e.g. ignore the regno
+   * parameter)
+   */
+#if 0
+  if (regno != -1)
+    STORE_REGS (state, regno, 1);
+  else
+#endif
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	STORE_REGS (state, index, 1);
+    }
+  
+  /* Write gdb's current view of register to the thread
+   */
+  ret = thread_set_state (current_thread,
+			  i386_THREAD_STATE,
+			  state,
+			  i386_THREAD_STATE_COUNT);
+  
+  if (ret != KERN_SUCCESS)
+    warning ("store_inferior_registers (set): %s",
+	     mach_error_string (ret));
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
+
+
+
+/* Return the address in the core dump or inferior of register REGNO.
+ * BLOCKEND should be the address of the end of the UPAGES area read
+ * in memory, but it's not?
+ *
+ * Currently our UX server dumps the whole thread state to the
+ * core file. If your UX does something else, adapt the routine
+ * below to return the offset to the given register.
+ * 
+ * Called by core-aout.c(fetch_core_registers)
+ */
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  CORE_ADDR addr;
+
+  if (regno < 0 || regno >= NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  /* UAREA_SIZE == 8 kB in i386 */
+  addr = (unsigned int)REG_ADDRESS (UAREA_SIZE - sizeof(struct i386_thread_state), regno);
+
+  return addr;
+}
+
+/* jtv@hut.fi: I copied and modified this 387 code from
+ * gdb/i386-xdep.c. Modifications for Mach 3.0.
+ *
+ * i387 status dumper. See also i387-tdep.c
+ */
+struct env387 
+{
+  unsigned short control;
+  unsigned short r0;
+  unsigned short status;
+  unsigned short r1;
+  unsigned short tag;
+  unsigned short r2;
+  unsigned long eip;
+  unsigned short code_seg;
+  unsigned short opcode;
+  unsigned long operand;
+  unsigned short operand_seg;
+  unsigned short r3;
+  unsigned char regs[8][10];
+};
+/* This routine is machine independent?
+ * Should move it to i387-tdep.c but you need to export struct env387
+ */
+private
+print_387_status (status, ep)
+     unsigned short status;
+     struct env387 *ep;
+{
+  int i;
+  int bothstatus;
+  int top;
+  int fpreg;
+  unsigned char *p;
+  
+  bothstatus = ((status != 0) && (ep->status != 0));
+  if (status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("u: ");
+      print_387_status_word (status);
+    }
+  
+  if (ep->status != 0) 
+    {
+      if (bothstatus)
+	printf_unfiltered ("e: ");
+      print_387_status_word (ep->status);
+    }
+  
+  print_387_control_word (ep->control);
+  printf_unfiltered ("last exception: ");
+  printf_unfiltered ("opcode %s; ", local_hex_string(ep->opcode));
+  printf_unfiltered ("pc %s:", local_hex_string(ep->code_seg));
+  printf_unfiltered ("%s; ", local_hex_string(ep->eip));
+  printf_unfiltered ("operand %s", local_hex_string(ep->operand_seg));
+  printf_unfiltered (":%s\n", local_hex_string(ep->operand));
+  
+  top = (ep->status >> 11) & 7;
+  
+  printf_unfiltered ("regno  tag  msb              lsb  value\n");
+  for (fpreg = 7; fpreg >= 0; fpreg--) 
+    {
+      double val;
+      
+      printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
+      
+      switch ((ep->tag >> (fpreg * 2)) & 3) 
+	{
+	case 0: printf_unfiltered ("valid "); break;
+	case 1: printf_unfiltered ("zero  "); break;
+	case 2: printf_unfiltered ("trap  "); break;
+	case 3: printf_unfiltered ("empty "); break;
+	}
+      for (i = 9; i >= 0; i--)
+	printf_unfiltered ("%02x", ep->regs[fpreg][i]);
+      
+      floatformat_to_double (&floatformat_i387_ext, (char *)ep->regs[fpreg],
+			       &val);
+      printf_unfiltered ("  %g\n", val);
+    }
+  if (ep->r0)
+    printf_unfiltered ("warning: reserved0 is %s\n", local_hex_string(ep->r0));
+  if (ep->r1)
+    printf_unfiltered ("warning: reserved1 is %s\n", local_hex_string(ep->r1));
+  if (ep->r2)
+    printf_unfiltered ("warning: reserved2 is %s\n", local_hex_string(ep->r2));
+  if (ep->r3)
+    printf_unfiltered ("warning: reserved3 is %s\n", local_hex_string(ep->r3));
+}
+	
+/*
+ * values that go into fp_kind (from <i386/fpreg.h>)
+ */
+#define FP_NO   0       /* no fp chip, no emulator (no fp support)      */
+#define FP_SW   1       /* no fp chip, using software emulator          */
+#define FP_HW   2       /* chip present bit                             */
+#define FP_287  2       /* 80287 chip present                           */
+#define FP_387  3       /* 80387 chip present                           */
+
+typedef struct fpstate {
+#if 1
+  unsigned char	state[FP_STATE_BYTES]; /* "hardware" state */
+#else
+  struct env387	state;	/* Actually this */
+#endif
+  int status;		/* Duplicate status */
+} *fpstate_t;
+
+/* Mach 3 specific routines.
+ */
+private boolean_t
+get_i387_state (fstate)
+     struct fpstate *fstate;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int fsCnt = i386_FLOAT_STATE_COUNT;
+  struct i386_float_state *fsp;
+  
+  ret = thread_get_state (current_thread,
+			  i386_FLOAT_STATE,
+			  state,
+			  &fsCnt);
+
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("Can not get live floating point state: %s",
+	       mach_error_string (ret));
+      return FALSE;
+    }
+
+  fsp = (struct i386_float_state *)state;
+  /* The 387 chip (also 486 counts) or a software emulator? */
+  if (!fsp->initialized || (fsp->fpkind != FP_387 && fsp->fpkind != FP_SW))
+    return FALSE;
+
+  /* Clear the target then copy thread's float state there.
+     Make a copy of the status word, for some reason?
+   */
+  memset (fstate, 0, sizeof (struct fpstate));
+
+  fstate->status = fsp->exc_status;
+
+  memcpy (fstate->state, (char *)&fsp->hw_state, FP_STATE_BYTES);
+
+  return TRUE;
+}
+
+private boolean_t
+get_i387_core_state (fstate)
+     struct fpstate *fstate;
+{
+  /* Not implemented yet. Core files do not contain float state. */
+  return FALSE;
+}
+
+/*
+ * This is called by "info float" command
+ */
+void
+i386_mach3_float_info()
+{
+  char buf [sizeof (struct fpstate) + 2 * sizeof (int)];
+  boolean_t valid = FALSE;
+  fpstate_t fps;
+  
+  if (target_has_execution)
+    valid = get_i387_state (buf);
+#if 0  
+  else if (WE HAVE CORE FILE)  /* @@@@ Core files not supported */
+    valid = get_i387_core_state (buf);
+#endif    
+
+  if (!valid) 
+    {
+      warning ("no floating point status saved");
+      return;
+    }
+  
+  fps = (fpstate_t) buf;
+
+  print_387_status (fps->status, (struct env387 *)fps->state);
+}
diff --git a/gdb/i386mach-nat.c b/gdb/i386mach-nat.c
new file mode 100644
index 0000000..f843d7f
--- /dev/null
+++ b/gdb/i386mach-nat.c
@@ -0,0 +1,163 @@
+/* Native dependent code for Mach 386's for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcore.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/core.h>
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+void
+fetch_inferior_registers (regno)
+     int regno;		/* Original value discarded */
+{
+  struct regs inferior_registers;
+  struct fp_state inferior_fp_registers;
+  extern char registers[];
+
+  registers_fetched ();
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+  ptrace (PTRACE_GETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+
+  memcpy (registers, &inferior_registers, sizeof inferior_registers);
+
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	 inferior_fp_registers.f_st,
+	 sizeof inferior_fp_registers.f_st);
+  memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	 &inferior_fp_registers.f_ctrl,
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+  struct fp_state inferior_fp_registers;
+  extern char registers[];
+
+  memcpy (&inferior_registers, registers, 20 * 4);
+
+  memcpy (inferior_fp_registers.f_st,&registers[REGISTER_BYTE (FP0_REGNUM)],
+	 sizeof inferior_fp_registers.f_st);
+  memcpy (&inferior_fp_registers.f_ctrl,
+	 &registers[REGISTER_BYTE (FPC_REGNUM)],
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
+  
+#ifdef PTRACE_FP_BUG
+  if (regno == FP_REGNUM || regno == -1)
+    /* Storing the frame pointer requires a gross hack, in which an
+       instruction that moves eax into ebp gets single-stepped.  */
+    {
+      int stack = inferior_registers.r_reg[SP_REGNUM];
+      int stuff = ptrace (PTRACE_PEEKDATA, inferior_pid,
+			  (PTRACE_ARG3_TYPE) stack);
+      int reg = inferior_registers.r_reg[EAX];
+      inferior_registers.r_reg[EAX] =
+	inferior_registers.r_reg[FP_REGNUM];
+      ptrace (PTRACE_SETREGS, inferior_pid,
+	      (PTRACE_ARG3_TYPE) &inferior_registers);
+      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack, 0xc589);
+      ptrace (PTRACE_SINGLESTEP, inferior_pid, (PTRACE_ARG3_TYPE) stack, 0);
+      wait (0);
+      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack, stuff);
+      inferior_registers.r_reg[EAX] = reg;
+    }
+#endif
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+  ptrace (PTRACE_SETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+}
+
+
+
+/* Work with core files, for GDB. */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+  int val;
+  extern char registers[];
+
+  switch (which) {
+  case 0:
+  case 1:
+    memcpy (registers, core_reg_sect, core_reg_size);
+    break;
+
+  case 2:
+#ifdef FP0_REGNUM
+    memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	   core_reg_sect,
+	   core_reg_size);		/* FIXME, probably bogus */
+#endif
+#ifdef FPC_REGNUM
+    memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	   &corestr.c_fpu.f_fpstatus.f_ctrl,
+	   sizeof corestr.c_fpu.f_fpstatus -
+	   sizeof corestr.c_fpu.f_fpstatus.f_st);
+#endif
+    break;
+  }
+}
+
+
+/* Register that we are able to handle i386mach core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns i386mach_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_i386mach ()
+{
+  add_core_fns (&i386mach_core_fns);
+}
diff --git a/gdb/i386v-nat.c b/gdb/i386v-nat.c
new file mode 100644
index 0000000..5618687
--- /dev/null
+++ b/gdb/i386v-nat.c
@@ -0,0 +1,392 @@
+/* Intel 386 native support for SYSV systems (pre-SVR4).
+   Copyright (C) 1988, 89, 91, 92, 94, 96, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+#ifdef HAVE_PTRACE_H
+# include <ptrace.h>
+#else
+# ifdef HAVE_SYS_PTRACE_H
+#  include <sys/ptrace.h>
+# endif
+#endif
+
+#include "frame.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcore.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/user.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+
+/* FIXME: The following used to be just "#include <sys/debugreg.h>", but
+ * the the Linux 2.1.x kernel and glibc 2.0.x are not in sync; including
+ * <sys/debugreg.h> will result in an error.  With luck, these losers
+ * will get their act together and we can trash this hack in the near future.
+ * --jsm 1998-10-21
+ */
+
+#ifdef TARGET_HAS_HARDWARE_WATCHPOINTS
+# ifdef HAVE_ASM_DEBUGREG_H
+#  include <asm/debugreg.h>
+# else
+#  include <sys/debugreg.h>
+# endif
+#endif
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#ifdef HAVE_SYS_REG_H
+#include <sys/reg.h>
+#endif
+
+#include "floatformat.h"
+
+#include "target.h"
+
+
+/* this table must line up with REGISTER_NAMES in tm-i386v.h */
+/* symbols like 'EAX' come from <sys/reg.h> */
+static int regmap[] = 
+{
+  EAX, ECX, EDX, EBX,
+  UESP, EBP, ESI, EDI,
+  EIP, EFL, CS, SS,
+  DS, ES, FS, GS,
+};
+
+/* blockend is the value of u.u_ar0, and points to the
+ * place where GS is stored
+ */
+
+int
+i386_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+  struct user u;
+  int fpstate;
+  int ubase;
+
+  ubase = blockend;
+  /* FIXME:  Should have better way to test floating point range */
+  if (regnum >= FP0_REGNUM && regnum <= (FP0_REGNUM + 7)) 
+    {
+#ifdef KSTKSZ	/* SCO, and others? */
+      ubase += 4 * (SS + 1) - KSTKSZ;
+      fpstate = ubase + ((char *)&u.u_fps.u_fpstate - (char *)&u);
+      return (fpstate + 0x1c + 10 * (regnum - FP0_REGNUM));
+#else
+      fpstate = ubase + ((char *)&u.i387.st_space - (char *)&u);
+      return (fpstate + 10 * (regnum - FP0_REGNUM));
+#endif
+    } 
+  else
+    {
+      return (ubase + 4 * regmap[regnum]);
+    }
+  
+}
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+#ifdef TARGET_HAS_HARDWARE_WATCHPOINTS
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* Record the value of the debug control register.  */
+static int debug_control_mirror;
+
+/* Record which address associates with which register.  */
+static CORE_ADDR address_lookup[DR_LASTADDR - DR_FIRSTADDR + 1];
+
+static int
+i386_insert_aligned_watchpoint PARAMS ((int, CORE_ADDR, CORE_ADDR, int,
+					   int));
+
+static int
+i386_insert_nonaligned_watchpoint PARAMS ((int, CORE_ADDR, CORE_ADDR, int,
+					   int));
+
+/* Insert a watchpoint.  */
+
+int
+i386_insert_watchpoint (pid, addr, len, rw)
+     int pid;
+     CORE_ADDR addr;
+     int len;
+     int rw;
+{
+  return i386_insert_aligned_watchpoint (pid, addr, addr, len, rw);
+}
+
+static int
+i386_insert_aligned_watchpoint (pid, waddr, addr, len, rw)
+     int pid;
+     CORE_ADDR waddr;
+     CORE_ADDR addr;
+     int len;
+     int rw;
+{
+  int i;
+  int read_write_bits, len_bits;
+  int free_debug_register;
+  int register_number;
+  
+  /* Look for a free debug register.  */
+  for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
+    {
+      if (address_lookup[i - DR_FIRSTADDR] == 0)
+	break;
+    }
+
+  /* No more debug registers!  */
+  if (i > DR_LASTADDR)
+    return -1;
+
+  read_write_bits = (rw & 1) ? DR_RW_READ : DR_RW_WRITE;
+
+  if (len == 1)
+    len_bits = DR_LEN_1;
+  else if (len == 2)
+    {
+      if (addr % 2)
+	return i386_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
+      len_bits = DR_LEN_2;
+    }
+
+  else if (len == 4)
+    {
+      if (addr % 4)
+	return i386_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
+      len_bits = DR_LEN_4;
+    }
+  else
+    return i386_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw);
+  
+  free_debug_register = i;
+  register_number = free_debug_register - DR_FIRSTADDR;
+  debug_control_mirror |=
+    ((read_write_bits | len_bits)
+     << (DR_CONTROL_SHIFT + DR_CONTROL_SIZE * register_number));
+  debug_control_mirror |=
+    (1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * register_number));
+  debug_control_mirror |= DR_LOCAL_SLOWDOWN;
+  debug_control_mirror &= ~DR_CONTROL_RESERVED;
+  
+  ptrace (6, pid, offsetof (struct user, u_debugreg[DR_CONTROL]),
+	  debug_control_mirror);
+  ptrace (6, pid, offsetof (struct user, u_debugreg[free_debug_register]),
+	  addr);
+
+  /* Record where we came from.  */
+  address_lookup[register_number] = addr;
+  return 0;
+}
+
+static int
+i386_insert_nonaligned_watchpoint (pid, waddr, addr, len, rw)
+     int pid;
+     CORE_ADDR waddr;
+     CORE_ADDR addr;
+     int len;
+     int rw;
+{
+  int align;
+  int size;
+  int rv;
+
+  static int size_try_array[16] = {
+    1, 1, 1, 1,			/* trying size one */
+    2, 1, 2, 1,			/* trying size two */
+    2, 1, 2, 1,			/* trying size three */
+    4, 1, 2, 1			/* trying size four */
+  };
+
+  rv = 0;
+  while (len > 0)
+    {
+      align = addr % 4;
+      /* Four is the maximum length for 386.  */
+      size = (len > 4) ? 3 : len - 1;
+      size = size_try_array[size * 4 + align];
+
+      rv = i386_insert_aligned_watchpoint (pid, waddr, addr, size, rw);
+      if (rv)
+	{
+	  i386_remove_watchpoint (pid, waddr, size);
+	  return rv;
+	}
+      addr += size;
+      len -= size;
+    }
+  return rv;
+}
+
+/* Remove a watchpoint.  */
+
+int
+i386_remove_watchpoint (pid, addr, len)
+     int pid;
+     CORE_ADDR addr;
+     int len;
+{
+  int i;
+  int register_number;
+
+  for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
+    {
+      register_number = i - DR_FIRSTADDR;
+      if (address_lookup[register_number] == addr)
+	{
+	  debug_control_mirror &=
+	    ~(1 << (DR_LOCAL_ENABLE_SHIFT + DR_ENABLE_SIZE * register_number));
+	  address_lookup[register_number] = 0;
+	}
+    }
+  ptrace (6, pid, offsetof (struct user, u_debugreg[DR_CONTROL]),
+	  debug_control_mirror);
+  ptrace (6, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
+
+  return 0;
+}
+
+/* Check if stopped by a watchpoint.  */
+
+CORE_ADDR
+i386_stopped_by_watchpoint (pid)
+    int pid;
+{
+  int i;
+  int status;
+
+  status = ptrace (3, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
+  ptrace (6, pid, offsetof (struct user, u_debugreg[DR_STATUS]), 0);
+
+  for (i = DR_FIRSTADDR; i <= DR_LASTADDR; i++)
+    {
+      if (status & (1 << (i - DR_FIRSTADDR)))
+	return address_lookup[i - DR_FIRSTADDR];
+    }
+
+  return 0;
+}
+
+#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
+
+#if 0
+/* using FLOAT_INFO as is would be a problem.  FLOAT_INFO is called
+   via a command xxx and eventually calls ptrace without ever having
+   traversed the target vector.  This would be terribly impolite
+   behaviour for a sun4 hosted remote gdb.
+
+   A fix might be to move this code into the "info registers" command.
+   rich@cygnus.com 15 Sept 92. */
+i386_float_info ()
+{
+  struct user u; /* just for address computations */
+  int i;
+  /* fpstate defined in <sys/user.h> */
+  struct fpstate *fpstatep;
+  char buf[sizeof (struct fpstate) + 2 * sizeof (int)];
+  unsigned int uaddr;
+  char fpvalid = 0;
+  unsigned int rounded_addr;
+  unsigned int rounded_size;
+  extern int corechan;
+  int skip;
+  
+  uaddr = (char *)&u.u_fpvalid - (char *)&u;
+  if (target_has_execution)
+    {
+      unsigned int data;
+      unsigned int mask;
+      
+      rounded_addr = uaddr & -sizeof (int);
+      data = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
+      mask = 0xff << ((uaddr - rounded_addr) * 8);
+      
+      fpvalid = ((data & mask) != 0);
+    } 
+#if 0
+  else 
+    {
+      if (lseek (corechan, uaddr, 0) < 0)
+	perror ("seek on core file");
+      if (myread (corechan, &fpvalid, 1) < 0) 
+	perror ("read on core file");
+      
+    }
+#endif	/* no core support yet */
+  
+  if (fpvalid == 0) 
+    {
+      printf_unfiltered ("no floating point status saved\n");
+      return;
+    }
+  
+  uaddr = (char *)&U_FPSTATE(u) - (char *)&u;
+  if (target_has_execution)
+    {
+      int *ip;
+      
+      rounded_addr = uaddr & -sizeof (int);
+      rounded_size = (((uaddr + sizeof (struct fpstate)) - uaddr) +
+		      sizeof (int) - 1) / sizeof (int);
+      skip = uaddr - rounded_addr;
+      
+      ip = (int *)buf;
+      for (i = 0; i < rounded_size; i++) 
+	{
+	  *ip++ = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) rounded_addr, 0);
+	  rounded_addr += sizeof (int);
+	}
+    } 
+#if 0
+  else 
+    {
+      if (lseek (corechan, uaddr, 0) < 0)
+	perror_with_name ("seek on core file");
+      if (myread (corechan, buf, sizeof (struct fpstate)) < 0) 
+	perror_with_name ("read from core file");
+      skip = 0;
+    }
+#endif	/* 0 */ 
+
+  fpstatep = (struct fpstate *)(buf + skip);
+  print_387_status (fpstatep->status, (struct env387 *)fpstatep->state);
+}
+
+#endif /* never */
diff --git a/gdb/i386v4-nat.c b/gdb/i386v4-nat.c
new file mode 100644
index 0000000..ea84c65
--- /dev/null
+++ b/gdb/i386v4-nat.c
@@ -0,0 +1,172 @@
+/* Native-dependent code for SVR4 Unix running on i386's, for GDB.
+   Copyright 1988, 1989, 1991, 1992, 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "value.h"
+
+#ifdef HAVE_SYS_REG_H
+#include <sys/reg.h>
+#endif
+
+
+#ifdef HAVE_SYS_PROCFS_H
+
+#include <sys/procfs.h>
+
+/*  The /proc interface divides the target machine's register set up into
+    two different sets, the general register set (gregset) and the floating
+    point register set (fpregset).  For each set, there is an ioctl to get
+    the current register set and another ioctl to set the current values.
+
+    The actual structure passed through the ioctl interface is, of course,
+    naturally machine dependent, and is different for each set of registers.
+    For the i386 for example, the general register set is typically defined
+    by:
+
+	typedef int gregset_t[19];		(in <sys/regset.h>)
+
+	#define GS	0			(in <sys/reg.h>)
+	#define FS	1
+	...
+	#define UESP	17
+	#define SS	18
+
+    and the floating point set by:
+
+	typedef struct fpregset
+	  {
+	    union
+	      {
+		struct fpchip_state	// fp extension state //
+		{
+		  int state[27];	// 287/387 saved state //
+		  int status;		// status word saved at exception //
+		} fpchip_state;
+		struct fp_emul_space	// for emulators //
+		{
+		  char fp_emul[246];
+		  char fp_epad[2];
+		} fp_emul_space;
+		int f_fpregs[62];	// union of the above //
+	      } fp_reg_set;
+	    long f_wregs[33];		// saved weitek state //
+	} fpregset_t;
+
+    These routines provide the packing and unpacking of gregset_t and
+    fpregset_t formatted data.
+
+ */
+
+#ifdef HAVE_GREGSET_T
+
+/* This is a duplicate of the table in i386-xdep.c. */
+
+static int regmap[] = 
+{
+  EAX, ECX, EDX, EBX,
+  UESP, EBP, ESI, EDI,
+  EIP, EFL, CS, SS,
+  DS, ES, FS, GS,
+};
+
+/* Prototypes for local functions */
+
+void fill_gregset PARAMS ((gregset_t *, int));
+
+void supply_gregset PARAMS ((gregset_t *));
+
+void supply_fpregset PARAMS ((fpregset_t *));
+
+void fill_fpregset PARAMS ((fpregset_t *, int));
+
+
+/*  FIXME:  These routine absolutely depends upon (NUM_REGS - NUM_FREGS)
+    being less than or equal to the number of registers that can be stored
+    in a gregset_t.  Note that with the current scheme there will typically
+    be more registers actually stored in a gregset_t that what we know
+    about.  This is bogus and should be fixed. */
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+  extern int regmap[];
+
+  for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regmap[regi]));
+    }
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+  extern char registers[];
+  extern int regmap[];
+
+  for (regi = 0 ; regi < (NUM_REGS - NUM_FREGS) ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regmap[regi]) = *(int *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+}
+
+#endif	/* HAVE_GREGSET_T */
+
+#if defined (FP0_REGNUM) && defined (HAVE_FPREGSET_T)
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  /* FIXME: see m68k-tdep.c for an example, for the m68k. */
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), update the register specified by REGNO from gdb's idea
+    of the current floating point register set.  If REGNO is -1, update
+    them all. */
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  /* FIXME: see m68k-tdep.c for an example, for the m68k. */
+}
+
+#endif	/* defined (FP0_REGNUM) && defined (HAVE_FPREGSET_T) */
+
+#endif	/* HAVE_SYS_PROCFS_H */
diff --git a/gdb/i387-tdep.c b/gdb/i387-tdep.c
new file mode 100644
index 0000000..869ab9a
--- /dev/null
+++ b/gdb/i387-tdep.c
@@ -0,0 +1,111 @@
+/* Intel 387 floating point stuff.
+   Copyright (C) 1988, 1989, 1991, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcore.h"
+#include "floatformat.h"
+
+void i387_to_double PARAMS ((char *, char *));
+
+void double_to_i387 PARAMS ((char *, char *));
+
+/* FIXME:  Eliminate these routines when we have the time to change all
+   the callers.  */
+
+void
+i387_to_double (from, to)
+     char *from;
+     char *to;
+{
+  floatformat_to_double (&floatformat_i387_ext, from, (double *)to);
+}
+
+void
+double_to_i387 (from, to)
+     char *from;
+     char *to;
+{
+  floatformat_from_double (&floatformat_i387_ext, (double *)from, to);
+}
+
+void
+print_387_control_word (control)
+     unsigned int control;
+{
+  printf_unfiltered ("control %s: ", local_hex_string(control));
+  printf_unfiltered ("compute to ");
+  switch ((control >> 8) & 3) 
+    {
+    case 0: printf_unfiltered ("24 bits; "); break;
+    case 1: printf_unfiltered ("(bad); "); break;
+    case 2: printf_unfiltered ("53 bits; "); break;
+    case 3: printf_unfiltered ("64 bits; "); break;
+    }
+  printf_unfiltered ("round ");
+  switch ((control >> 10) & 3) 
+    {
+    case 0: printf_unfiltered ("NEAREST; "); break;
+    case 1: printf_unfiltered ("DOWN; "); break;
+    case 2: printf_unfiltered ("UP; "); break;
+    case 3: printf_unfiltered ("CHOP; "); break;
+    }
+  if (control & 0x3f) 
+    {
+      printf_unfiltered ("mask:");
+      if (control & 0x0001) printf_unfiltered (" INVALID");
+      if (control & 0x0002) printf_unfiltered (" DENORM");
+      if (control & 0x0004) printf_unfiltered (" DIVZ");
+      if (control & 0x0008) printf_unfiltered (" OVERF");
+      if (control & 0x0010) printf_unfiltered (" UNDERF");
+      if (control & 0x0020) printf_unfiltered (" LOS");
+      printf_unfiltered (";");
+    }
+  printf_unfiltered ("\n");
+  if (control & 0xe080) warning ("reserved bits on: %s\n",
+				local_hex_string(control & 0xe080));
+}
+
+void
+print_387_status_word (status)
+     unsigned int status;
+{
+  printf_unfiltered ("status %s: ", local_hex_string (status));
+  if (status & 0xff) 
+    {
+      printf_unfiltered ("exceptions:");
+      if (status & 0x0001) printf_unfiltered (" INVALID");
+      if (status & 0x0002) printf_unfiltered (" DENORM");
+      if (status & 0x0004) printf_unfiltered (" DIVZ");
+      if (status & 0x0008) printf_unfiltered (" OVERF");
+      if (status & 0x0010) printf_unfiltered (" UNDERF");
+      if (status & 0x0020) printf_unfiltered (" LOS");
+      if (status & 0x0040) printf_unfiltered (" FPSTACK");
+      printf_unfiltered ("; ");
+    }
+  printf_unfiltered ("flags: %d%d%d%d; ",
+	  (status & 0x4000) != 0,
+	  (status & 0x0400) != 0,
+	  (status & 0x0200) != 0,
+	  (status & 0x0100) != 0);
+
+  printf_unfiltered ("top %d\n", (status >> 11) & 7);
+}
diff --git a/gdb/i960-tdep.c b/gdb/i960-tdep.c
new file mode 100644
index 0000000..e33415d
--- /dev/null
+++ b/gdb/i960-tdep.c
@@ -0,0 +1,838 @@
+/* Target-machine dependent code for the Intel 960
+   Copyright 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Intel Corporation.
+   examine_prologue and other parts contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "value.h"
+#include "frame.h"
+#include "floatformat.h"
+#include "target.h"
+#include "gdbcore.h"
+
+static CORE_ADDR next_insn PARAMS ((CORE_ADDR memaddr,
+				    unsigned int *pword1,
+				    unsigned int *pword2));
+
+/* Does the specified function use the "struct returning" convention
+   or the "value returning" convention?  The "value returning" convention
+   almost invariably returns the entire value in registers.  The
+   "struct returning" convention often returns the entire value in
+   memory, and passes a pointer (out of or into the function) saying
+   where the value (is or should go).
+
+   Since this sometimes depends on whether it was compiled with GCC,
+   this is also an argument.  This is used in call_function to build a
+   stack, and in value_being_returned to print return values.
+
+   On i960, a structure is returned in registers g0-g3, if it will fit.
+   If it's more than 16 bytes long, g13 pointed to it on entry.  */
+
+int
+i960_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 16);
+}
+
+/* gdb960 is always running on a non-960 host.  Check its characteristics.
+   This routine must be called as part of gdb initialization.  */
+
+static void
+check_host()
+{
+	int i;
+
+	static struct typestruct {
+		int hostsize;		/* Size of type on host		*/
+		int i960size;		/* Size of type on i960		*/
+		char *typename;		/* Name of type, for error msg	*/
+	} types[] = {
+		{ sizeof(short),  2, "short" },
+		{ sizeof(int),    4, "int" },
+		{ sizeof(long),   4, "long" },
+		{ sizeof(float),  4, "float" },
+		{ sizeof(double), 8, "double" },
+		{ sizeof(char *), 4, "pointer" },
+	};
+#define TYPELEN	(sizeof(types) / sizeof(struct typestruct))
+
+	/* Make sure that host type sizes are same as i960
+	 */
+	for ( i = 0; i < TYPELEN; i++ ){
+		if ( types[i].hostsize != types[i].i960size ){
+			printf_unfiltered("sizeof(%s) != %d:  PROCEED AT YOUR OWN RISK!\n",
+					types[i].typename, types[i].i960size );
+		}
+
+	}
+}
+
+/* Examine an i960 function prologue, recording the addresses at which
+   registers are saved explicitly by the prologue code, and returning
+   the address of the first instruction after the prologue (but not
+   after the instruction at address LIMIT, as explained below).
+
+   LIMIT places an upper bound on addresses of the instructions to be
+   examined.  If the prologue code scan reaches LIMIT, the scan is
+   aborted and LIMIT is returned.  This is used, when examining the
+   prologue for the current frame, to keep examine_prologue () from
+   claiming that a given register has been saved when in fact the
+   instruction that saves it has not yet been executed.  LIMIT is used
+   at other times to stop the scan when we hit code after the true
+   function prologue (e.g. for the first source line) which might
+   otherwise be mistaken for function prologue.
+
+   The format of the function prologue matched by this routine is
+   derived from examination of the source to gcc960 1.21, particularly
+   the routine i960_function_prologue ().  A "regular expression" for
+   the function prologue is given below:
+
+   (lda LRn, g14
+    mov g14, g[0-7]
+    (mov 0, g14) | (lda 0, g14))?
+
+   (mov[qtl]? g[0-15], r[4-15])*
+   ((addo [1-31], sp, sp) | (lda n(sp), sp))?
+   (st[qtl]? g[0-15], n(fp))*
+
+   (cmpobne 0, g14, LFn
+    mov sp, g14
+    lda 0x30(sp), sp
+    LFn: stq g0, (g14)
+    stq g4, 0x10(g14)
+    stq g8, 0x20(g14))?
+
+   (st g14, n(fp))?
+   (mov g13,r[4-15])?
+*/
+
+/* Macros for extracting fields from i960 instructions.  */
+
+#define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos))
+#define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width))
+
+#define REG_SRC1(insn)    EXTRACT_FIELD (insn, 0, 5)
+#define REG_SRC2(insn)    EXTRACT_FIELD (insn, 14, 5)
+#define REG_SRCDST(insn)  EXTRACT_FIELD (insn, 19, 5)
+#define MEM_SRCDST(insn)  EXTRACT_FIELD (insn, 19, 5)
+#define MEMA_OFFSET(insn) EXTRACT_FIELD (insn, 0, 12)
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+   is not the address of a valid instruction, the address of the next
+   instruction beyond ADDR otherwise.  *PWORD1 receives the first word
+   of the instruction, and (for two-word instructions), *PWORD2 receives
+   the second.  */
+
+#define NEXT_PROLOGUE_INSN(addr, lim, pword1, pword2) \
+  (((addr) < (lim)) ? next_insn (addr, pword1, pword2) : 0)
+
+static CORE_ADDR
+examine_prologue (ip, limit, frame_addr, fsr)
+     register CORE_ADDR ip;
+     register CORE_ADDR limit;
+     CORE_ADDR frame_addr;
+     struct frame_saved_regs *fsr;
+{
+  register CORE_ADDR next_ip;
+  register int src, dst;
+  register unsigned int *pcode;
+  unsigned int insn1, insn2;
+  int size;
+  int within_leaf_prologue;
+  CORE_ADDR save_addr;
+  static unsigned int varargs_prologue_code [] =
+    {
+       0x3507a00c,	/* cmpobne 0x0, g14, LFn */
+       0x5cf01601,	/* mov sp, g14		 */
+       0x8c086030,	/* lda 0x30(sp), sp	 */
+       0xb2879000,	/* LFn: stq  g0, (g14)   */
+       0xb2a7a010,	/* stq g4, 0x10(g14)	 */
+       0xb2c7a020	/* stq g8, 0x20(g14)	 */
+    };
+
+  /* Accept a leaf procedure prologue code fragment if present.
+     Note that ip might point to either the leaf or non-leaf
+     entry point; we look for the non-leaf entry point first:  */
+
+  within_leaf_prologue = 0;
+  if ((next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2))
+      && ((insn1 & 0xfffff000) == 0x8cf00000         /* lda LRx, g14 (MEMA) */
+	  || (insn1 & 0xfffffc60) == 0x8cf03000))    /* lda LRx, g14 (MEMB) */
+    {
+      within_leaf_prologue = 1;
+      next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn1, &insn2);
+    }
+
+  /* Now look for the prologue code at a leaf entry point:  */
+
+  if (next_ip
+      && (insn1 & 0xff87ffff) == 0x5c80161e         /* mov g14, gx */
+      && REG_SRCDST (insn1) <= G0_REGNUM + 7)
+    {
+      within_leaf_prologue = 1;
+      if ((next_ip = NEXT_PROLOGUE_INSN (next_ip, limit, &insn1, &insn2))
+	  && (insn1 == 0x8cf00000                   /* lda 0, g14 */
+	      || insn1 == 0x5cf01e00))              /* mov 0, g14 */
+	{
+	  ip = next_ip;
+	  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+	  within_leaf_prologue = 0;
+	}
+    }
+
+  /* If something that looks like the beginning of a leaf prologue
+     has been seen, but the remainder of the prologue is missing, bail.
+     We don't know what we've got.  */
+
+  if (within_leaf_prologue)
+    return (ip);
+	  
+  /* Accept zero or more instances of "mov[qtl]? gx, ry", where y >= 4.
+     This may cause us to mistake the moving of a register
+     parameter to a local register for the saving of a callee-saved
+     register, but that can't be helped, since with the
+     "-fcall-saved" flag, any register can be made callee-saved.  */
+
+  while (next_ip
+	 && (insn1 & 0xfc802fb0) == 0x5c000610
+	 && (dst = REG_SRCDST (insn1)) >= (R0_REGNUM + 4))
+    {
+      src = REG_SRC1 (insn1);
+      size = EXTRACT_FIELD (insn1, 24, 2) + 1;
+      save_addr = frame_addr + ((dst - R0_REGNUM) * 4);
+      while (size--)
+	{
+	  fsr->regs[src++] = save_addr;
+	  save_addr += 4;
+	}
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+    }
+
+  /* Accept an optional "addo n, sp, sp" or "lda n(sp), sp".  */
+
+  if (next_ip &&
+      ((insn1 & 0xffffffe0) == 0x59084800	/* addo n, sp, sp */
+       || (insn1 & 0xfffff000) == 0x8c086000	/* lda n(sp), sp (MEMA) */
+       || (insn1 & 0xfffffc60) == 0x8c087400))	/* lda n(sp), sp (MEMB) */
+    {
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+    }
+
+  /* Accept zero or more instances of "st[qtl]? gx, n(fp)".  
+     This may cause us to mistake the copying of a register
+     parameter to the frame for the saving of a callee-saved
+     register, but that can't be helped, since with the
+     "-fcall-saved" flag, any register can be made callee-saved.
+     We can, however, refuse to accept a save of register g14,
+     since that is matched explicitly below.  */
+
+  while (next_ip &&
+	 ((insn1 & 0xf787f000) == 0x9287e000      /* stl? gx, n(fp) (MEMA) */
+	  || (insn1 & 0xf787fc60) == 0x9287f400   /* stl? gx, n(fp) (MEMB) */
+	  || (insn1 & 0xef87f000) == 0xa287e000   /* st[tq] gx, n(fp) (MEMA) */
+	  || (insn1 & 0xef87fc60) == 0xa287f400)  /* st[tq] gx, n(fp) (MEMB) */
+	 && ((src = MEM_SRCDST (insn1)) != G14_REGNUM))
+    {
+      save_addr = frame_addr + ((insn1 & BITMASK (12, 1))
+				? insn2 : MEMA_OFFSET (insn1));
+      size = (insn1 & BITMASK (29, 1)) ? ((insn1 & BITMASK (28, 1)) ? 4 : 3)
+	                               : ((insn1 & BITMASK (27, 1)) ? 2 : 1);
+      while (size--)
+	{
+	  fsr->regs[src++] = save_addr;
+	  save_addr += 4;
+	}
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+    }
+
+  /* Accept the varargs prologue code if present.  */
+
+  size = sizeof (varargs_prologue_code) / sizeof (int);
+  pcode = varargs_prologue_code;
+  while (size-- && next_ip && *pcode++ == insn1)
+    {
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+    }
+
+  /* Accept an optional "st g14, n(fp)".  */
+
+  if (next_ip &&
+      ((insn1 & 0xfffff000) == 0x92f7e000	 /* st g14, n(fp) (MEMA) */
+       || (insn1 & 0xfffffc60) == 0x92f7f400))   /* st g14, n(fp) (MEMB) */
+    {
+      fsr->regs[G14_REGNUM] = frame_addr + ((insn1 & BITMASK (12, 1))
+				            ? insn2 : MEMA_OFFSET (insn1));
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+    }
+
+  /* Accept zero or one instance of "mov g13, ry", where y >= 4.
+     This is saving the address where a struct should be returned.  */
+
+  if (next_ip
+      && (insn1 & 0xff802fbf) == 0x5c00061d
+      && (dst = REG_SRCDST (insn1)) >= (R0_REGNUM + 4))
+    {
+      save_addr = frame_addr + ((dst - R0_REGNUM) * 4);
+      fsr->regs[G0_REGNUM+13] = save_addr;
+      ip = next_ip;
+#if 0  /* We'll need this once there is a subsequent instruction examined. */
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn1, &insn2);
+#endif
+    }
+
+  return (ip);
+}
+
+/* Given an ip value corresponding to the start of a function,
+   return the ip of the first instruction after the function 
+   prologue.  */
+
+CORE_ADDR
+skip_prologue (ip)
+     CORE_ADDR (ip);
+{
+  struct frame_saved_regs saved_regs_dummy;
+  struct symtab_and_line sal;
+  CORE_ADDR limit;
+
+  sal = find_pc_line (ip, 0);
+  limit = (sal.end) ? sal.end : 0xffffffff;
+
+  return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy));
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   We cache the result of doing this in the frame_obstack, since it is
+   fairly expensive.  */
+
+void
+frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  register CORE_ADDR next_addr;
+  register CORE_ADDR *saved_regs;
+  register int regnum;
+  register struct frame_saved_regs *cache_fsr;
+  CORE_ADDR ip;
+  struct symtab_and_line sal;
+  CORE_ADDR limit;
+
+  if (!fi->fsr)
+    {
+      cache_fsr = (struct frame_saved_regs *)
+	frame_obstack_alloc (sizeof (struct frame_saved_regs));
+      memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+      fi->fsr = cache_fsr;
+
+      /* Find the start and end of the function prologue.  If the PC
+	 is in the function prologue, we only consider the part that
+	 has executed already.  */
+         
+      ip = get_pc_function_start (fi->pc);
+      sal = find_pc_line (ip, 0);
+      limit = (sal.end && sal.end < fi->pc) ? sal.end: fi->pc;
+
+      examine_prologue (ip, limit, fi->frame, cache_fsr);
+
+      /* Record the addresses at which the local registers are saved.
+	 Strictly speaking, we should only do this for non-leaf procedures,
+	 but no one will ever look at these values if it is a leaf procedure,
+	 since local registers are always caller-saved.  */
+
+      next_addr = (CORE_ADDR) fi->frame;
+      saved_regs = cache_fsr->regs;
+      for (regnum = R0_REGNUM; regnum <= R15_REGNUM; regnum++)
+	{
+	  *saved_regs++ = next_addr;
+	  next_addr += 4;
+	}
+
+      cache_fsr->regs[FP_REGNUM] = cache_fsr->regs[PFP_REGNUM];
+    }
+
+  *fsr = *fi->fsr;
+
+  /* Fetch the value of the sp from memory every time, since it
+     is conceivable that it has changed since the cache was flushed.  
+     This unfortunately undoes much of the savings from caching the 
+     saved register values.  I suggest adding an argument to 
+     get_frame_saved_regs () specifying the register number we're
+     interested in (or -1 for all registers).  This would be passed
+     through to FRAME_FIND_SAVED_REGS (), permitting more efficient
+     computation of saved register addresses (e.g., on the i960,
+     we don't have to examine the prologue to find local registers). 
+	-- markf@wrs.com 
+     FIXME, we don't need to refetch this, since the cache is cleared
+     every time the child process is restarted.  If GDB itself
+     modifies SP, it has to clear the cache by hand (does it?).  -gnu */
+
+  fsr->regs[SP_REGNUM] = read_memory_integer (fsr->regs[SP_REGNUM], 4);
+}
+
+/* Return the address of the argument block for the frame
+   described by FI.  Returns 0 if the address is unknown.  */
+
+CORE_ADDR
+frame_args_address (fi, must_be_correct)
+     struct frame_info *fi;
+{
+  struct frame_saved_regs fsr;
+  CORE_ADDR ap;
+
+  /* If g14 was saved in the frame by the function prologue code, return
+     the saved value.  If the frame is current and we are being sloppy,
+     return the value of g14.  Otherwise, return zero.  */
+
+  get_frame_saved_regs (fi, &fsr);
+  if (fsr.regs[G14_REGNUM])
+    ap = read_memory_integer (fsr.regs[G14_REGNUM],4);
+  else
+    {
+      if (must_be_correct)
+	return 0;			/* Don't cache this result */
+      if (get_next_frame (fi))
+	ap = 0;
+      else
+	ap = read_register (G14_REGNUM);
+      if (ap == 0)
+	ap = fi->frame;
+    }
+  fi->arg_pointer = ap;		/* Cache it for next time */
+  return ap;
+}
+
+/* Return the address of the return struct for the frame
+   described by FI.  Returns 0 if the address is unknown.  */
+
+CORE_ADDR
+frame_struct_result_address (fi)
+     struct frame_info *fi;
+{
+  struct frame_saved_regs fsr;
+  CORE_ADDR ap;
+
+  /* If the frame is non-current, check to see if g14 was saved in the
+     frame by the function prologue code; return the saved value if so,
+     zero otherwise.  If the frame is current, return the value of g14.
+
+     FIXME, shouldn't this use the saved value as long as we are past
+     the function prologue, and only use the current value if we have
+     no saved value and are at TOS?   -- gnu@cygnus.com */
+
+  if (get_next_frame (fi))
+    {
+      get_frame_saved_regs (fi, &fsr);
+      if (fsr.regs[G13_REGNUM])
+	ap = read_memory_integer (fsr.regs[G13_REGNUM],4);
+      else
+	ap = 0;
+    }
+  else
+    ap = read_register (G13_REGNUM);
+
+  return ap;
+}
+
+/* Return address to which the currently executing leafproc will return,
+   or 0 if ip is not in a leafproc (or if we can't tell if it is).
+  
+   Do this by finding the starting address of the routine in which ip lies.
+   If the instruction there is "mov g14, gx" (where x is in [0,7]), this
+   is a leafproc and the return address is in register gx.  Well, this is
+   true unless the return address points at a RET instruction in the current
+   procedure, which indicates that we have a 'dual entry' routine that
+   has been entered through the CALL entry point.  */
+
+CORE_ADDR
+leafproc_return (ip)
+     CORE_ADDR ip;	/* ip from currently executing function	*/
+{
+  register struct minimal_symbol *msymbol;
+  char *p;
+  int dst;
+  unsigned int insn1, insn2;
+  CORE_ADDR return_addr;
+
+  if ((msymbol = lookup_minimal_symbol_by_pc (ip)) != NULL)
+    {
+      if ((p = strchr(SYMBOL_NAME (msymbol), '.')) && STREQ (p, ".lf"))
+	{
+	  if (next_insn (SYMBOL_VALUE_ADDRESS (msymbol), &insn1, &insn2)
+	      && (insn1 & 0xff87ffff) == 0x5c80161e       /* mov g14, gx */
+	      && (dst = REG_SRCDST (insn1)) <= G0_REGNUM + 7)
+	    {
+	      /* Get the return address.  If the "mov g14, gx" 
+		 instruction hasn't been executed yet, read
+		 the return address from g14; otherwise, read it
+		 from the register into which g14 was moved.  */
+
+	      return_addr =
+		  read_register ((ip == SYMBOL_VALUE_ADDRESS (msymbol))
+				           ? G14_REGNUM : dst);
+
+	      /* We know we are in a leaf procedure, but we don't know
+		 whether the caller actually did a "bal" to the ".lf"
+		 entry point, or a normal "call" to the non-leaf entry
+		 point one instruction before.  In the latter case, the
+		 return address will be the address of a "ret"
+		 instruction within the procedure itself.  We test for
+		 this below.  */
+
+	      if (!next_insn (return_addr, &insn1, &insn2)
+		  || (insn1 & 0xff000000) != 0xa000000   /* ret */
+	          || lookup_minimal_symbol_by_pc (return_addr) != msymbol)
+		return (return_addr);
+	    }
+	}
+    }
+  
+  return (0);
+}
+
+/* Immediately after a function call, return the saved pc.
+   Can't go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions. 
+   On the i960, the frame *is* set up immediately after the call,
+   unless the function is a leaf procedure.  */
+
+CORE_ADDR
+saved_pc_after_call (frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR saved_pc;
+
+  saved_pc = leafproc_return (get_frame_pc (frame));
+  if (!saved_pc)
+    saved_pc = FRAME_SAVED_PC (frame);
+
+  return saved_pc;
+}
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+void
+pop_frame ()
+{
+  register struct frame_info *current_fi, *prev_fi;
+  register int i;
+  CORE_ADDR save_addr;
+  CORE_ADDR leaf_return_addr;
+  struct frame_saved_regs fsr;
+  char local_regs_buf[16 * 4];
+
+  current_fi = get_current_frame ();
+
+  /* First, undo what the hardware does when we return.
+     If this is a non-leaf procedure, restore local registers from
+     the save area in the calling frame.  Otherwise, load the return
+     address obtained from leafproc_return () into the rip.  */
+
+  leaf_return_addr = leafproc_return (current_fi->pc);
+  if (!leaf_return_addr)
+    {
+      /* Non-leaf procedure.  Restore local registers, incl IP.  */
+      prev_fi = get_prev_frame (current_fi);
+      read_memory (prev_fi->frame, local_regs_buf, sizeof (local_regs_buf));
+      write_register_bytes (REGISTER_BYTE (R0_REGNUM), local_regs_buf, 
+		            sizeof (local_regs_buf));
+
+      /* Restore frame pointer.  */
+      write_register (FP_REGNUM, prev_fi->frame);
+    }
+  else
+    {
+      /* Leaf procedure.  Just restore the return address into the IP.  */
+      write_register (RIP_REGNUM, leaf_return_addr);
+    }
+
+  /* Now restore any global regs that the current function had saved. */
+  get_frame_saved_regs (current_fi, &fsr);
+  for (i = G0_REGNUM; i < G14_REGNUM; i++)
+    {
+      if (save_addr = fsr.regs[i])
+	write_register (i, read_memory_integer (save_addr, 4));
+    }
+
+  /* Flush the frame cache, create a frame for the new innermost frame,
+     and make it the current frame.  */
+
+  flush_cached_frames ();
+}
+
+/* Given a 960 stop code (fault or trace), return the signal which
+   corresponds.  */
+
+enum target_signal
+i960_fault_to_signal (fault)
+    int fault;
+{
+  switch (fault)
+    {
+    case 0: return TARGET_SIGNAL_BUS; /* parallel fault */
+    case 1: return TARGET_SIGNAL_UNKNOWN;
+    case 2: return TARGET_SIGNAL_ILL; /* operation fault */
+    case 3: return TARGET_SIGNAL_FPE; /* arithmetic fault */
+    case 4: return TARGET_SIGNAL_FPE; /* floating point fault */
+
+      /* constraint fault.  This appears not to distinguish between
+	 a range constraint fault (which should be SIGFPE) and a privileged
+	 fault (which should be SIGILL).  */
+    case 5: return TARGET_SIGNAL_ILL;
+
+    case 6: return TARGET_SIGNAL_SEGV; /* virtual memory fault */
+
+      /* protection fault.  This is for an out-of-range argument to
+	 "calls".  I guess it also could be SIGILL. */
+    case 7: return TARGET_SIGNAL_SEGV;
+
+    case 8: return TARGET_SIGNAL_BUS; /* machine fault */
+    case 9: return TARGET_SIGNAL_BUS; /* structural fault */
+    case 0xa: return TARGET_SIGNAL_ILL; /* type fault */
+    case 0xb: return TARGET_SIGNAL_UNKNOWN; /* reserved fault */
+    case 0xc: return TARGET_SIGNAL_BUS; /* process fault */
+    case 0xd: return TARGET_SIGNAL_SEGV; /* descriptor fault */
+    case 0xe: return TARGET_SIGNAL_BUS; /* event fault */
+    case 0xf: return TARGET_SIGNAL_UNKNOWN; /* reserved fault */
+    case 0x10: return TARGET_SIGNAL_TRAP; /* single-step trace */
+    case 0x11: return TARGET_SIGNAL_TRAP; /* branch trace */
+    case 0x12: return TARGET_SIGNAL_TRAP; /* call trace */
+    case 0x13: return TARGET_SIGNAL_TRAP; /* return trace */
+    case 0x14: return TARGET_SIGNAL_TRAP; /* pre-return trace */
+    case 0x15: return TARGET_SIGNAL_TRAP; /* supervisor call trace */
+    case 0x16: return TARGET_SIGNAL_TRAP; /* breakpoint trace */
+    default: return TARGET_SIGNAL_UNKNOWN;
+    }
+}
+
+/****************************************/
+/* MEM format				*/
+/****************************************/
+
+struct tabent {
+	char	*name;
+	char	numops;
+};
+
+static int				/* returns instruction length: 4 or 8 */
+mem( memaddr, word1, word2, noprint )
+    unsigned long memaddr;
+    unsigned long word1, word2;
+    int noprint;		/* If TRUE, return instruction length, but
+				   don't output any text.  */
+{
+	int i, j;
+	int len;
+	int mode;
+	int offset;
+	const char *reg1, *reg2, *reg3;
+
+	/* This lookup table is too sparse to make it worth typing in, but not
+	 * so large as to make a sparse array necessary.  We allocate the
+	 * table at runtime, initialize all entries to empty, and copy the
+	 * real ones in from an initialization table.
+	 *
+	 * NOTE: In this table, the meaning of 'numops' is:
+	 *	 1: single operand
+	 *	 2: 2 operands, load instruction
+	 *	-2: 2 operands, store instruction
+	 */
+	static struct tabent *mem_tab = NULL;
+/* Opcodes of 0x8X, 9X, aX, bX, and cX must be in the table.  */
+#define MEM_MIN	0x80
+#define MEM_MAX	0xcf
+#define MEM_SIZ	((MEM_MAX-MEM_MIN+1) * sizeof(struct tabent))
+
+	static struct { int opcode; char *name; char numops; } mem_init[] = {
+		0x80,	"ldob",	 2,
+		0x82,	"stob",	-2,
+		0x84,	"bx",	 1,
+		0x85,	"balx",	 2,
+		0x86,	"callx", 1,
+		0x88,	"ldos",	 2,
+		0x8a,	"stos",	-2,
+		0x8c,	"lda",	 2,
+		0x90,	"ld",	 2,
+		0x92,	"st",	-2,
+		0x98,	"ldl",	 2,
+		0x9a,	"stl",	-2,
+		0xa0,	"ldt",	 2,
+		0xa2,	"stt",	-2,
+		0xb0,	"ldq",	 2,
+		0xb2,	"stq",	-2,
+		0xc0,	"ldib",	 2,
+		0xc2,	"stib",	-2,
+		0xc8,	"ldis",	 2,
+		0xca,	"stis",	-2,
+		0,	NULL,	0
+	};
+
+	if ( mem_tab == NULL ){
+		mem_tab = (struct tabent *) xmalloc( MEM_SIZ );
+		memset( mem_tab, '\0', MEM_SIZ );
+		for ( i = 0; mem_init[i].opcode != 0; i++ ){
+			j = mem_init[i].opcode - MEM_MIN;
+			mem_tab[j].name = mem_init[i].name;
+			mem_tab[j].numops = mem_init[i].numops;
+		}
+	}
+
+	i = ((word1 >> 24) & 0xff) - MEM_MIN;
+	mode = (word1 >> 10) & 0xf;
+
+	if ( (mem_tab[i].name != NULL)		/* Valid instruction */
+	&&   ((mode == 5) || (mode >=12)) ){	/* With 32-bit displacement */
+		len = 8;
+	} else {
+		len = 4;
+	}
+
+	if ( noprint ){
+		return len;
+	}
+	abort ();
+}
+
+/* Read the i960 instruction at 'memaddr' and return the address of 
+   the next instruction after that, or 0 if 'memaddr' is not the
+   address of a valid instruction.  The first word of the instruction
+   is stored at 'pword1', and the second word, if any, is stored at
+   'pword2'.  */
+
+static CORE_ADDR
+next_insn (memaddr, pword1, pword2)
+     unsigned int *pword1, *pword2;
+     CORE_ADDR memaddr;
+{
+  int len;
+  char buf[8];
+
+  /* Read the two (potential) words of the instruction at once,
+     to eliminate the overhead of two calls to read_memory ().
+     FIXME: Loses if the first one is readable but the second is not
+     (e.g. last word of the segment).  */
+
+  read_memory (memaddr, buf, 8);
+  *pword1 = extract_unsigned_integer (buf, 4);
+  *pword2 = extract_unsigned_integer (buf + 4, 4);
+
+  /* Divide instruction set into classes based on high 4 bits of opcode*/
+
+  switch ((*pword1 >> 28) & 0xf)
+    {
+    case 0x0:
+    case 0x1:	/* ctrl */
+
+    case 0x2:
+    case 0x3:	/* cobr */
+
+    case 0x5:
+    case 0x6:
+    case 0x7:	/* reg */
+      len = 4;
+      break;
+
+    case 0x8:
+    case 0x9:
+    case 0xa:
+    case 0xb:
+    case 0xc:
+      len = mem (memaddr, *pword1, *pword2, 1);
+      break;
+
+    default:	/* invalid instruction */
+      len = 0;
+      break;
+    }
+
+  if (len)
+    return memaddr + len;
+  else
+    return 0;
+}
+
+/* 'start_frame' is a variable in the MON960 runtime startup routine
+   that contains the frame pointer of the 'start' routine (the routine
+   that calls 'main').  By reading its contents out of remote memory,
+   we can tell where the frame chain ends:  backtraces should halt before
+   they display this frame.  */
+
+int
+mon960_frame_chain_valid (chain, curframe)
+    CORE_ADDR chain;
+    struct frame_info *curframe;
+{
+	struct symbol *sym;
+	struct minimal_symbol *msymbol;
+
+	/* crtmon960.o is an assembler module that is assumed to be linked
+	 * first in an i80960 executable.  It contains the true entry point;
+	 * it performs startup up initialization and then calls 'main'.
+	 *
+	 * 'sf' is the name of a variable in crtmon960.o that is set
+	 *	during startup to the address of the first frame.
+	 *
+	 * 'a' is the address of that variable in 80960 memory.
+	 */
+	static char sf[] = "start_frame";
+	CORE_ADDR a;
+
+
+	chain &= ~0x3f; /* Zero low 6 bits because previous frame pointers
+			   contain return status info in them.  */
+	if ( chain == 0 ){
+		return 0;
+	}
+
+	sym = lookup_symbol(sf, 0, VAR_NAMESPACE, (int *)NULL, 
+				  (struct symtab **)NULL);
+	if ( sym != 0 ){
+		a = SYMBOL_VALUE (sym);
+	} else {
+		msymbol = lookup_minimal_symbol (sf, NULL, NULL);
+		if (msymbol == NULL)
+			return 0;
+		a = SYMBOL_VALUE_ADDRESS (msymbol);
+	}
+
+	return ( chain != read_memory_integer(a,4) );
+}
+
+void
+_initialize_i960_tdep ()
+{
+  check_host ();
+
+  tm_print_insn = print_insn_i960;
+}
diff --git a/gdb/infcmd.c b/gdb/infcmd.c
new file mode 100644
index 0000000..4add1f0
--- /dev/null
+++ b/gdb/infcmd.c
@@ -0,0 +1,1553 @@
+/* Memory-access and commands for "inferior" process, for GDB.
+   Copyright 1986, 87, 88, 89, 91, 92, 95, 96, 1998 
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <signal.h>
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "frame.h"
+#include "inferior.h"
+#include "environ.h"
+#include "value.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "language.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+/* Functions exported for general use: */
+
+void nofp_registers_info PARAMS ((char *, int));
+
+void all_registers_info PARAMS ((char *, int));
+
+void registers_info PARAMS ((char *, int));
+
+/* Local functions: */
+
+void continue_command PARAMS ((char *, int));
+
+static void until_next_command PARAMS ((int));
+
+static void until_command PARAMS ((char *, int));
+
+static void path_info PARAMS ((char *, int));
+
+static void path_command PARAMS ((char *, int));
+
+static void unset_command PARAMS ((char *, int));
+
+static void float_info PARAMS ((char *, int));
+
+static void detach_command PARAMS ((char *, int));
+
+#if !defined (DO_REGISTERS_INFO)
+static void do_registers_info PARAMS ((int, int));
+#endif
+
+static void unset_environment_command PARAMS ((char *, int));
+
+static void set_environment_command PARAMS ((char *, int));
+
+static void environment_info PARAMS ((char *, int));
+
+static void program_info PARAMS ((char *, int));
+
+static void finish_command PARAMS ((char *, int));
+
+static void signal_command PARAMS ((char *, int));
+
+static void jump_command PARAMS ((char *, int));
+
+static void step_1 PARAMS ((int, int, char *));
+
+void nexti_command PARAMS ((char *, int));
+
+void stepi_command PARAMS ((char *, int));
+
+static void next_command PARAMS ((char *, int));
+
+static void step_command PARAMS ((char *, int));
+
+static void run_command PARAMS ((char *, int));
+
+void _initialize_infcmd PARAMS ((void));
+
+#define GO_USAGE   "Usage: go <location>\n"
+
+#ifdef CALL_DUMMY_BREAKPOINT_OFFSET
+static void breakpoint_auto_delete_contents PARAMS ((PTR));
+#endif
+
+#define ERROR_NO_INFERIOR \
+   if (!target_has_execution) error ("The program is not being run.");
+
+/* String containing arguments to give to the program, separated by spaces.
+   Empty string (pointer to '\0') means no args.  */
+
+static char *inferior_args;
+
+/* File name for default use for standard in/out in the inferior.  */
+
+char *inferior_io_terminal;
+
+/* Pid of our debugged inferior, or 0 if no inferior now.
+   Since various parts of infrun.c test this to see whether there is a program
+   being debugged it should be nonzero (currently 3 is used) for remote
+   debugging.  */
+
+int inferior_pid;
+
+/* Last signal that the inferior received (why it stopped).  */
+
+enum target_signal stop_signal;
+
+/* Address at which inferior stopped.  */
+
+CORE_ADDR stop_pc;
+
+/* Chain containing status of breakpoint(s) that we have stopped at.  */
+
+bpstat stop_bpstat;
+
+/* Flag indicating that a command has proceeded the inferior past the
+   current breakpoint.  */
+
+int breakpoint_proceeded;
+
+/* Nonzero if stopped due to a step command.  */
+
+int stop_step;
+
+/* Nonzero if stopped due to completion of a stack dummy routine.  */
+
+int stop_stack_dummy;
+
+/* Nonzero if stopped due to a random (unexpected) signal in inferior
+   process.  */
+
+int stopped_by_random_signal;
+
+/* Range to single step within.
+   If this is nonzero, respond to a single-step signal
+   by continuing to step if the pc is in this range.  */
+
+CORE_ADDR step_range_start; /* Inclusive */
+CORE_ADDR step_range_end; /* Exclusive */
+
+/* Stack frame address as of when stepping command was issued.
+   This is how we know when we step into a subroutine call,
+   and how to set the frame for the breakpoint used to step out.  */
+
+CORE_ADDR step_frame_address;
+
+/* Our notion of the current stack pointer.  */
+
+CORE_ADDR step_sp;
+
+/* 1 means step over all subroutine calls.
+   0 means don't step over calls (used by stepi).
+   -1 means step over calls to undebuggable functions.  */
+
+int step_over_calls;
+
+/* If stepping, nonzero means step count is > 1
+   so don't print frame next time inferior stops
+   if it stops due to stepping.  */
+
+int step_multi;
+
+/* Environment to use for running inferior,
+   in format described in environ.h.  */
+
+struct environ *inferior_environ;
+
+
+/* ARGSUSED */
+void
+tty_command (file, from_tty)
+     char *file;
+     int from_tty;
+{
+  if (file == 0)
+    error_no_arg ("terminal name for running target process");
+
+  inferior_io_terminal = savestring (file, strlen (file));
+}
+
+static void
+run_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *exec_file;
+
+  dont_repeat ();
+
+  if (inferior_pid != 0 && target_has_execution)
+    {
+      if (
+	  !query ("The program being debugged has been started already.\n\
+Start it from the beginning? "))
+	error ("Program not restarted.");
+      target_kill ();
+#if defined(SOLIB_RESTART)
+      SOLIB_RESTART ();
+#endif
+      init_wait_for_inferior ();
+    }
+
+  clear_breakpoint_hit_counts ();
+
+  exec_file = (char *) get_exec_file (0);
+
+  /* Purge old solib objfiles. */
+  objfile_purge_solibs ();
+
+  do_run_cleanups (NULL);
+
+  /* The exec file is re-read every time we do a generic_mourn_inferior, so
+     we just have to worry about the symbol file.  */
+  reread_symbols ();
+
+  /* We keep symbols from add-symbol-file, on the grounds that the
+     user might want to add some symbols before running the program
+     (right?).  But sometimes (dynamic loading where the user manually
+     introduces the new symbols with add-symbol-file), the code which
+     the symbols describe does not persist between runs.  Currently
+     the user has to manually nuke all symbols between runs if they
+     want them to go away (PR 2207).  This is probably reasonable.  */
+
+  if (args)
+    {
+      char *cmd;
+      cmd = concat ("set args ", args, NULL);
+      make_cleanup (free, cmd);
+      execute_command (cmd, from_tty);
+    }
+
+  if (from_tty)
+    {
+      puts_filtered("Starting program: ");
+      if (exec_file)
+	puts_filtered(exec_file);
+      puts_filtered(" ");
+      puts_filtered(inferior_args);
+      puts_filtered("\n");
+      gdb_flush (gdb_stdout);
+    }
+
+  target_create_inferior (exec_file, inferior_args,
+			  environ_vector (inferior_environ));
+}
+
+
+static void
+run_no_args_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  execute_command("set args", from_tty);
+  run_command((char *)NULL, from_tty);
+}
+
+
+void
+continue_command (proc_count_exp, from_tty)
+     char *proc_count_exp;
+     int from_tty;
+{
+  ERROR_NO_INFERIOR;
+
+  /* If have argument, set proceed count of breakpoint we stopped at.  */
+
+  if (proc_count_exp != NULL)
+    {
+      bpstat bs = stop_bpstat;
+      int num = bpstat_num (&bs);
+      if (num == 0 && from_tty)
+	{
+	  printf_filtered
+	    ("Not stopped at any breakpoint; argument ignored.\n");
+	}
+      while (num != 0)
+	{
+	  set_ignore_count (num,
+			    parse_and_eval_address (proc_count_exp) - 1,
+			    from_tty);
+	  /* set_ignore_count prints a message ending with a period.
+	     So print two spaces before "Continuing.".  */
+	  if (from_tty)
+	    printf_filtered ("  ");
+	  num = bpstat_num (&bs);
+	}
+    }
+
+  if (from_tty)
+    printf_filtered ("Continuing.\n");
+
+  clear_proceed_status ();
+
+  proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Step until outside of current statement.  */
+
+/* ARGSUSED */
+static void
+step_command (count_string, from_tty)
+     char *count_string;
+     int from_tty;
+{
+  step_1 (0, 0, count_string);
+}
+
+/* Likewise, but skip over subroutine calls as if single instructions.  */
+
+/* ARGSUSED */
+static void
+next_command (count_string, from_tty)
+     char *count_string;
+     int from_tty;
+{
+  step_1 (1, 0, count_string);
+}
+
+/* Likewise, but step only one instruction.  */
+
+/* ARGSUSED */
+void
+stepi_command (count_string, from_tty)
+     char *count_string;
+     int from_tty;
+{
+  step_1 (0, 1, count_string);
+}
+
+/* ARGSUSED */
+void
+nexti_command (count_string, from_tty)
+     char *count_string;
+     int from_tty;
+{
+  step_1 (1, 1, count_string);
+}
+
+static void
+step_1 (skip_subroutines, single_inst, count_string)
+     int skip_subroutines;
+     int single_inst;
+     char *count_string;
+{
+  register int count = 1;
+  struct frame_info *frame;
+  struct cleanup *cleanups = 0;
+
+  ERROR_NO_INFERIOR;
+  count = count_string ? parse_and_eval_address (count_string) : 1;
+
+  if (!single_inst || skip_subroutines) /* leave si command alone */
+    {
+      enable_longjmp_breakpoint();
+      cleanups = make_cleanup ((make_cleanup_func) disable_longjmp_breakpoint, 
+                               0);
+    }
+
+  for (; count > 0; count--)
+    {
+      clear_proceed_status ();
+
+      frame = get_current_frame ();
+      if (!frame)			/* Avoid coredump here.  Why tho? */
+	error ("No current frame");
+      step_frame_address = FRAME_FP (frame);
+      step_sp = read_sp ();
+
+      if (! single_inst)
+	{
+	  find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end);
+	  if (step_range_end == 0)
+	    {
+	      char *name;
+	      if (find_pc_partial_function (stop_pc, &name, &step_range_start,
+					    &step_range_end) == 0)
+		error ("Cannot find bounds of current function");
+
+	      target_terminal_ours ();
+	      printf_filtered ("\
+Single stepping until exit from function %s, \n\
+which has no line number information.\n", name);
+	    }
+	}
+      else
+	{
+	  /* Say we are stepping, but stop after one insn whatever it does.  */
+	  step_range_start = step_range_end = 1;
+	  if (!skip_subroutines)
+	    /* It is stepi.
+	       Don't step over function calls, not even to functions lacking
+	       line numbers.  */
+	    step_over_calls = 0;
+	}
+
+      if (skip_subroutines)
+	step_over_calls = 1;
+
+      step_multi = (count > 1);
+      proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+      if (! stop_step)
+	break;
+
+      /* FIXME: On nexti, this may have already been done (when we hit the
+	 step resume break, I think).  Probably this should be moved to
+	 wait_for_inferior (near the top).  */
+#if defined (SHIFT_INST_REGS)
+      SHIFT_INST_REGS();
+#endif
+    }
+
+  if (!single_inst || skip_subroutines)
+    do_cleanups(cleanups);
+}
+
+/* Continue program at specified address.  */
+
+static void
+jump_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register CORE_ADDR addr;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  struct symbol *fn;
+  struct symbol *sfn;
+
+  ERROR_NO_INFERIOR;
+
+  if (!arg)
+    error_no_arg ("starting address");
+
+  sals = decode_line_spec_1 (arg, 1);
+  if (sals.nelts != 1)
+    {
+      error ("Unreasonable jump request");
+    }
+
+  sal = sals.sals[0];
+  free ((PTR)sals.sals);
+
+  if (sal.symtab == 0 && sal.pc == 0)
+    error ("No source file has been specified.");
+
+  resolve_sal_pc (&sal);			/* May error out */
+
+  /* See if we are trying to jump to another function. */
+  fn = get_frame_function (get_current_frame ());
+  sfn = find_pc_function (sal.pc);
+  if (fn != NULL && sfn != fn)
+    {
+      if (!query ("Line %d is not in `%s'.  Jump anyway? ", sal.line,
+		  SYMBOL_SOURCE_NAME (fn)))
+	{
+	  error ("Not confirmed.");
+	  /* NOTREACHED */
+	}
+    }
+
+  if (sfn != NULL) 
+    {
+      fixup_symbol_section (sfn, 0);
+      if (section_is_overlay (SYMBOL_BFD_SECTION (sfn)) && 
+	  !section_is_mapped (SYMBOL_BFD_SECTION (sfn)))
+	{
+	  if (!query ("WARNING!!!  Destination is in unmapped overlay!  Jump anyway? "))
+	    {
+	      error ("Not confirmed.");
+	      /* NOTREACHED */
+	    }
+	}
+    }
+
+
+  addr = sal.pc;
+
+  if (from_tty)
+    {
+      printf_filtered ("Continuing at ");
+      print_address_numeric (addr, 1, gdb_stdout);
+      printf_filtered (".\n");
+    }
+
+  clear_proceed_status ();
+  proceed (addr, TARGET_SIGNAL_0, 0);
+}
+
+
+/* Go to line or address in current procedure */
+static void
+go_command(line_no, from_tty)
+     char *line_no;
+     int from_tty;
+{
+  if (line_no == (char *)NULL || !*line_no)
+    printf_filtered(GO_USAGE);
+  else
+    {
+      tbreak_command(line_no, from_tty);
+      jump_command(line_no, from_tty);
+    }
+}
+
+
+/* Continue program giving it specified signal.  */
+
+static void
+signal_command (signum_exp, from_tty)
+     char *signum_exp;
+     int from_tty;
+{
+  enum target_signal oursig;
+
+  dont_repeat ();		/* Too dangerous.  */
+  ERROR_NO_INFERIOR;
+
+  if (!signum_exp)
+    error_no_arg ("signal number");
+
+  /* It would be even slicker to make signal names be valid expressions,
+     (the type could be "enum $signal" or some such), then the user could
+     assign them to convenience variables.  */
+  oursig = target_signal_from_name (signum_exp);
+
+  if (oursig == TARGET_SIGNAL_UNKNOWN)
+    {
+      /* No, try numeric.  */
+      int num = parse_and_eval_address (signum_exp);
+
+      if (num == 0)
+	oursig = TARGET_SIGNAL_0;
+      else
+	oursig = target_signal_from_command (num);
+    }
+
+  if (from_tty)
+    {
+      if (oursig == TARGET_SIGNAL_0)
+	printf_filtered ("Continuing with no signal.\n");
+      else
+	printf_filtered ("Continuing with signal %s.\n",
+			 target_signal_to_name (oursig));
+    }
+
+  clear_proceed_status ();
+  /* "signal 0" should not get stuck if we are stopped at a breakpoint.
+     FIXME: Neither should "signal foo" but when I tried passing
+     (CORE_ADDR)-1 unconditionally I got a testsuite failure which I haven't
+     tried to track down yet.  */
+  proceed (oursig == TARGET_SIGNAL_0 ? (CORE_ADDR) -1 : stop_pc, oursig, 0);
+}
+
+/* Call breakpoint_auto_delete on the current contents of the bpstat
+   pointed to by arg (which is really a bpstat *).  */
+
+#ifdef CALL_DUMMY_BREAKPOINT_OFFSET
+
+static void
+breakpoint_auto_delete_contents (arg)
+     PTR arg;
+{
+  breakpoint_auto_delete (*(bpstat *)arg);
+}
+
+#endif	/* CALL_DUMMY_BREAKPOINT_OFFSET */
+
+/* Execute a "stack dummy", a piece of code stored in the stack
+   by the debugger to be executed in the inferior.
+
+   To call: first, do PUSH_DUMMY_FRAME.
+   Then push the contents of the dummy.  It should end with a breakpoint insn.
+   Then call here, passing address at which to start the dummy.
+
+   The contents of all registers are saved before the dummy frame is popped
+   and copied into the buffer BUFFER.
+
+   The dummy's frame is automatically popped whenever that break is hit.
+   If that is the first time the program stops, run_stack_dummy
+   returns to its caller with that frame already gone and returns 0.
+   Otherwise, run_stack-dummy returns 1 (the frame will eventually be popped
+   when we do hit that breakpoint).  */
+
+/* DEBUG HOOK:  4 => return instead of letting the stack dummy run.  */
+
+static int stack_dummy_testing = 0;
+
+int
+run_stack_dummy (addr, buffer)
+     CORE_ADDR addr;
+     char buffer[REGISTER_BYTES];
+{
+  struct cleanup *old_cleanups = make_cleanup (null_cleanup, 0);
+
+  /* Now proceed, having reached the desired place.  */
+  clear_proceed_status ();
+  if (stack_dummy_testing & 4)
+    {
+      POP_FRAME;
+      return(0);
+    }
+#ifdef CALL_DUMMY_BREAKPOINT_OFFSET
+  {
+    struct breakpoint *bpt;
+    struct symtab_and_line sal;
+
+    INIT_SAL (&sal);	/* initialize to zeroes */
+#if CALL_DUMMY_LOCATION != AT_ENTRY_POINT
+    sal.pc = addr - CALL_DUMMY_START_OFFSET + CALL_DUMMY_BREAKPOINT_OFFSET;
+#else
+    sal.pc = CALL_DUMMY_ADDRESS ();
+#endif
+    sal.section = find_pc_overlay (sal.pc);
+
+    /* Set up a FRAME for the dummy frame so we can pass it to
+       set_momentary_breakpoint.  We need to give the breakpoint a
+       frame in case there is only one copy of the dummy (e.g.
+       CALL_DUMMY_LOCATION == AFTER_TEXT_END).  */
+    flush_cached_frames ();
+    set_current_frame (create_new_frame (read_fp (), sal.pc));
+
+    /* If defined, CALL_DUMMY_BREAKPOINT_OFFSET is where we need to put
+       a breakpoint instruction.  If not, the call dummy already has the
+       breakpoint instruction in it.
+
+       addr is the address of the call dummy plus the CALL_DUMMY_START_OFFSET,
+       so we need to subtract the CALL_DUMMY_START_OFFSET.  */
+    bpt = set_momentary_breakpoint (sal,
+				    get_current_frame (),
+				    bp_call_dummy);
+    bpt->disposition = del;
+
+    /* If all error()s out of proceed ended up calling normal_stop (and
+       perhaps they should; it already does in the special case of error
+       out of resume()), then we wouldn't need this.  */
+    make_cleanup (breakpoint_auto_delete_contents, &stop_bpstat);
+  }
+#endif /* CALL_DUMMY_BREAKPOINT_OFFSET.  */
+
+  disable_watchpoints_before_interactive_call_start ();
+  proceed_to_finish = 1;	/* We want stop_registers, please... */
+  proceed (addr, TARGET_SIGNAL_0, 0);
+  enable_watchpoints_after_interactive_call_stop ();
+
+  discard_cleanups (old_cleanups);
+
+  if (!stop_stack_dummy)
+    return 1;
+
+  /* On return, the stack dummy has been popped already.  */
+
+  memcpy (buffer, stop_registers, sizeof stop_registers);
+  return 0;
+}
+
+/* Proceed until we reach a different source line with pc greater than
+   our current one or exit the function.  We skip calls in both cases.
+
+   Note that eventually this command should probably be changed so
+   that only source lines are printed out when we hit the breakpoint
+   we set.  This may involve changes to wait_for_inferior and the
+   proceed status code.  */
+
+/* ARGSUSED */
+static void
+until_next_command (from_tty)
+     int from_tty;
+{
+  struct frame_info *frame;
+  CORE_ADDR pc;
+  struct symbol *func;
+  struct symtab_and_line sal;
+ 
+  clear_proceed_status ();
+
+  frame = get_current_frame ();
+
+  /* Step until either exited from this function or greater
+     than the current line (if in symbolic section) or pc (if
+     not). */
+
+  pc = read_pc ();
+  func = find_pc_function (pc);
+  
+  if (!func)
+    {
+      struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc);
+      
+      if (msymbol == NULL)
+	error ("Execution is not within a known function.");
+      
+      step_range_start = SYMBOL_VALUE_ADDRESS (msymbol);
+      step_range_end = pc;
+    }
+  else
+    {
+      sal = find_pc_line (pc, 0);
+      
+      step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func));
+      step_range_end = sal.end;
+    }
+  
+  step_over_calls = 1;
+  step_frame_address = FRAME_FP (frame);
+  step_sp = read_sp ();
+
+  step_multi = 0;		/* Only one call to proceed */
+  
+  proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1);
+}
+
+static void 
+until_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  if (!target_has_execution)
+    error ("The program is not running.");
+  if (arg)
+    until_break_command (arg, from_tty);
+  else
+    until_next_command (from_tty);
+}
+
+/* "finish": Set a temporary breakpoint at the place
+   the selected frame will return to, then continue.  */
+
+static void
+finish_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct symtab_and_line sal;
+  register struct frame_info *frame;
+  register struct symbol *function;
+  struct breakpoint *breakpoint;
+  struct cleanup *old_chain;
+
+  if (arg)
+    error ("The \"finish\" command does not take any arguments.");
+  if (!target_has_execution)
+    error ("The program is not running.");
+  if (selected_frame == NULL)
+    error ("No selected frame.");
+
+  frame = get_prev_frame (selected_frame);
+  if (frame == 0)
+    error ("\"finish\" not meaningful in the outermost frame.");
+
+  clear_proceed_status ();
+
+  sal = find_pc_line (frame->pc, 0);
+  sal.pc = frame->pc;
+
+  breakpoint = set_momentary_breakpoint (sal, frame, bp_finish);
+
+  old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint);
+
+  /* Find the function we will return from.  */
+
+  function = find_pc_function (selected_frame->pc);
+
+  /* Print info on the selected frame, including level number
+     but not source.  */
+  if (from_tty)
+    {
+      printf_filtered ("Run till exit from ");
+      print_stack_frame (selected_frame, selected_frame_level, 0);
+    }
+
+  proceed_to_finish = 1;		/* We want stop_registers, please... */
+  proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
+
+  /* Did we stop at our breakpoint? */
+  if (bpstat_find_breakpoint(stop_bpstat, breakpoint) != NULL
+      && function != 0)
+    {
+      struct type *value_type;
+      register value_ptr val;
+      CORE_ADDR funcaddr;
+      int struct_return;
+
+      value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function));
+      if (!value_type)
+	fatal ("internal: finish_command: function has no target type");
+      
+      if (TYPE_CODE (value_type) == TYPE_CODE_VOID)
+	return;
+
+      funcaddr = BLOCK_START (SYMBOL_BLOCK_VALUE (function));
+
+      struct_return = using_struct_return (value_of_variable (function, NULL),
+
+				   funcaddr,
+				   check_typedef (value_type),
+		BLOCK_GCC_COMPILED (SYMBOL_BLOCK_VALUE (function)));
+
+      if (!struct_return)
+      {
+        val = value_being_returned (value_type, stop_registers, struct_return);
+        printf_filtered ("Value returned is $%d = ", record_latest_value (val));
+        value_print (val, gdb_stdout, 0, Val_no_prettyprint);
+        printf_filtered ("\n");
+      }
+      else
+      {
+       /* elz: we cannot determine the contents of the structure because
+	  it is on the stack, and we don't know where, since we did not
+	  initiate the call, as opposed to the call_function_by_hand case */
+#ifdef VALUE_RETURNED_FROM_STACK
+          val = 0;
+          printf_filtered ("Value returned has type: %s.", 
+			   TYPE_NAME (value_type));
+          printf_filtered (" Cannot determine contents\n");
+#else
+          val = value_being_returned (value_type, stop_registers, 
+				      struct_return);
+          printf_filtered ("Value returned is $%d = ", 
+			   record_latest_value (val));
+          value_print (val, gdb_stdout, 0, Val_no_prettyprint);
+          printf_filtered ("\n");
+#endif
+       
+      }
+    }
+  do_cleanups(old_chain);
+}
+
+/* ARGSUSED */
+static void
+program_info (args, from_tty)
+    char *args;
+    int from_tty;
+{
+  bpstat bs = stop_bpstat;
+  int num = bpstat_num (&bs);
+  
+  if (!target_has_execution)
+    {
+      printf_filtered ("The program being debugged is not being run.\n");
+      return;
+    }
+
+  target_files_info ();
+  printf_filtered ("Program stopped at %s.\n",
+		   local_hex_string((unsigned long) stop_pc));
+  if (stop_step)
+    printf_filtered ("It stopped after being stepped.\n");
+  else if (num != 0)
+    {
+      /* There may be several breakpoints in the same place, so this
+	 isn't as strange as it seems.  */
+      while (num != 0)
+	{
+	  if (num < 0)
+	    {
+	      printf_filtered ("It stopped at a breakpoint that has ");
+	      printf_filtered ("since been deleted.\n");
+	    }
+	  else
+	    printf_filtered ("It stopped at breakpoint %d.\n", num);
+	  num = bpstat_num (&bs);
+	}
+    }
+  else if (stop_signal != TARGET_SIGNAL_0)
+    {
+      printf_filtered ("It stopped with signal %s, %s.\n",
+		       target_signal_to_name (stop_signal),
+		       target_signal_to_string (stop_signal));
+    }
+
+  if (!from_tty)
+    {
+      printf_filtered ("Type \"info stack\" or \"info registers\" ");
+      printf_filtered ("for more information.\n");
+    }
+}
+
+static void
+environment_info (var, from_tty)
+     char *var;
+     int from_tty;
+{
+  if (var)
+    {
+      register char *val = get_in_environ (inferior_environ, var);
+      if (val)
+	{
+	  puts_filtered (var);
+	  puts_filtered (" = ");
+	  puts_filtered (val);
+	  puts_filtered ("\n");
+	}
+      else
+	{
+	  puts_filtered ("Environment variable \"");
+	  puts_filtered (var);
+	  puts_filtered ("\" not defined.\n");
+	}
+    }
+  else
+    {
+      register char **vector = environ_vector (inferior_environ);
+      while (*vector)
+	{
+	  puts_filtered (*vector++);
+	  puts_filtered ("\n");
+	}
+    }
+}
+
+static void
+set_environment_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register char *p, *val, *var;
+  int nullset = 0;
+
+  if (arg == 0)
+    error_no_arg ("environment variable and value");
+
+  /* Find seperation between variable name and value */
+  p = (char *) strchr (arg, '=');
+  val = (char *) strchr (arg, ' ');
+
+  if (p != 0 && val != 0)
+    {
+      /* We have both a space and an equals.  If the space is before the
+	 equals, walk forward over the spaces til we see a nonspace 
+	 (possibly the equals). */
+      if (p > val)
+	while (*val == ' ')
+	  val++;
+
+      /* Now if the = is after the char following the spaces,
+	 take the char following the spaces.  */
+      if (p > val)
+	p = val - 1;
+    }
+  else if (val != 0 && p == 0)
+    p = val;
+
+  if (p == arg)
+    error_no_arg ("environment variable to set");
+
+  if (p == 0 || p[1] == 0)
+    {
+      nullset = 1;
+      if (p == 0)
+	p = arg + strlen (arg);	/* So that savestring below will work */
+    }
+  else
+    {
+      /* Not setting variable value to null */
+      val = p + 1;
+      while (*val == ' ' || *val == '\t')
+	val++;
+    }
+
+  while (p != arg && (p[-1] == ' ' || p[-1] == '\t')) p--;
+
+  var = savestring (arg, p - arg);
+  if (nullset)
+    {
+      printf_filtered ("Setting environment variable ");
+      printf_filtered ("\"%s\" to null value.\n", var);
+      set_in_environ (inferior_environ, var, "");
+    }
+  else
+    set_in_environ (inferior_environ, var, val);
+  free (var);
+}
+
+static void
+unset_environment_command (var, from_tty)
+     char *var;
+     int from_tty;
+{
+  if (var == 0)
+    {
+      /* If there is no argument, delete all environment variables.
+	 Ask for confirmation if reading from the terminal.  */
+      if (!from_tty || query ("Delete all environment variables? "))
+	{
+	  free_environ (inferior_environ);
+	  inferior_environ = make_environ ();
+	}
+    }
+  else
+    unset_in_environ (inferior_environ, var);
+}
+
+/* Handle the execution path (PATH variable) */
+
+static const char path_var_name[] = "PATH";
+
+/* ARGSUSED */
+static void
+path_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  puts_filtered ("Executable and object file path: ");
+  puts_filtered (get_in_environ (inferior_environ, path_var_name));
+  puts_filtered ("\n");
+}
+
+/* Add zero or more directories to the front of the execution path.  */
+
+static void
+path_command (dirname, from_tty)
+     char *dirname;
+     int from_tty;
+{
+  char *exec_path;
+  char *env;
+  dont_repeat ();
+  env = get_in_environ (inferior_environ, path_var_name);
+  /* Can be null if path is not set */
+  if (!env)
+    env = "";
+  exec_path = strsave (env);
+  mod_path (dirname, &exec_path);
+  set_in_environ (inferior_environ, path_var_name, exec_path);
+  free (exec_path);
+  if (from_tty)
+    path_info ((char *)NULL, from_tty);
+}
+
+
+#ifdef REGISTER_NAMES
+char *gdb_register_names[] = REGISTER_NAMES;
+#endif
+/* Print out the machine register regnum. If regnum is -1,
+   print all registers (fpregs == 1) or all non-float registers
+   (fpregs == 0).
+
+   For most machines, having all_registers_info() print the
+   register(s) one per line is good enough. If a different format
+   is required, (eg, for MIPS or Pyramid 90x, which both have
+   lots of regs), or there is an existing convention for showing
+   all the registers, define the macro DO_REGISTERS_INFO(regnum, fp)
+   to provide that format.  */  
+
+#if !defined (DO_REGISTERS_INFO)
+
+#define DO_REGISTERS_INFO(regnum, fp) do_registers_info(regnum, fp)
+
+static void
+do_registers_info (regnum, fpregs)
+     int regnum;
+     int fpregs;
+{
+  register int i;
+  int numregs = ARCH_NUM_REGS;
+
+  for (i = 0; i < numregs; i++)
+    {
+      char raw_buffer[MAX_REGISTER_RAW_SIZE];
+      char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE];
+
+      /* Decide between printing all regs, nonfloat regs, or specific reg.  */
+      if (regnum == -1) {
+	if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT && !fpregs)
+	  continue;
+      } else {
+        if (i != regnum)
+	  continue;
+      }
+
+      /* If the register name is empty, it is undefined for this
+	 processor, so don't display anything.  */
+      if (REGISTER_NAME (i) == NULL || *(REGISTER_NAME (i)) == '\0')
+	continue;
+
+      fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+      print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout);
+
+      /* Get the data in raw format.  */
+      if (read_relative_register_raw_bytes (i, raw_buffer))
+	{
+	  printf_filtered ("*value not available*\n");
+	  continue;
+	}
+
+      /* Convert raw data to virtual format if necessary.  */
+#ifdef REGISTER_CONVERTIBLE
+      if (REGISTER_CONVERTIBLE (i))
+	{
+	  REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i),
+				       raw_buffer, virtual_buffer);
+	}
+      else
+#endif
+	memcpy (virtual_buffer, raw_buffer,
+		REGISTER_VIRTUAL_SIZE (i));
+
+      /* If virtual format is floating, print it that way, and in raw hex.  */
+      if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+	{
+	  register int j;
+
+#ifdef INVALID_FLOAT
+	  if (INVALID_FLOAT (virtual_buffer, REGISTER_VIRTUAL_SIZE (i)))
+	    printf_filtered ("<invalid float>");
+	  else
+#endif
+	    val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+		       gdb_stdout, 0, 1, 0, Val_pretty_default);
+
+	  printf_filtered ("\t(raw 0x");
+	  for (j = 0; j < REGISTER_RAW_SIZE (i); j++)
+	    {
+	      register int idx = TARGET_BYTE_ORDER == BIG_ENDIAN ? j
+		: REGISTER_RAW_SIZE (i) - 1 - j;
+	      printf_filtered ("%02x", (unsigned char)raw_buffer[idx]);
+	    }
+	  printf_filtered (")");
+	}
+
+/* FIXME!  val_print probably can handle all of these cases now...  */
+
+      /* Else if virtual format is too long for printf,
+	 print in hex a byte at a time.  */
+      else if (REGISTER_VIRTUAL_SIZE (i) > (int) sizeof (long))
+	{
+	  register int j;
+	  printf_filtered ("0x");
+	  for (j = 0; j < REGISTER_VIRTUAL_SIZE (i); j++)
+	    printf_filtered ("%02x", (unsigned char)virtual_buffer[j]);
+	}
+      /* Else print as integer in hex and in decimal.  */
+      else
+	{
+	  val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+		     gdb_stdout, 'x', 1, 0, Val_pretty_default);
+	  printf_filtered ("\t");
+	  val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0,
+		     gdb_stdout,   0, 1, 0, Val_pretty_default);
+	}
+
+      /* The SPARC wants to print even-numbered float regs as doubles
+	 in addition to printing them as floats.  */
+#ifdef PRINT_REGISTER_HOOK
+      PRINT_REGISTER_HOOK (i);
+#endif
+
+      printf_filtered ("\n");
+    }
+}
+#endif /* no DO_REGISTERS_INFO.  */
+
+extern int target_map_name_to_register PARAMS ((char *, int));
+
+void
+registers_info (addr_exp, fpregs)
+     char *addr_exp;
+     int fpregs;
+{
+  int regnum, numregs;
+  register char *end;
+
+  if (!target_has_registers)
+    error ("The program has no registers now.");
+  if (selected_frame == NULL)
+    error ("No selected frame.");
+
+  if (!addr_exp)
+    {
+      DO_REGISTERS_INFO(-1, fpregs);
+      return;
+    }
+
+  do
+    {      
+      if (addr_exp[0] == '$')
+	addr_exp++;
+      end = addr_exp;
+      while (*end != '\0' && *end != ' ' && *end != '\t')
+	++end;
+      numregs = ARCH_NUM_REGS;
+
+      regnum = target_map_name_to_register (addr_exp, end - addr_exp);
+      if (regnum >= 0) 
+	goto found;
+
+      regnum = numregs;
+
+      if (*addr_exp >= '0' && *addr_exp <= '9')
+	regnum = atoi (addr_exp);		/* Take a number */
+      if (regnum >= numregs)		/* Bad name, or bad number */
+	error ("%.*s: invalid register", end - addr_exp, addr_exp);
+
+found:
+      DO_REGISTERS_INFO(regnum, fpregs);
+
+      addr_exp = end;
+      while (*addr_exp == ' ' || *addr_exp == '\t')
+	++addr_exp;
+    } while (*addr_exp != '\0');
+}
+
+void
+all_registers_info (addr_exp, from_tty)
+     char *addr_exp;
+     int from_tty;
+{
+  registers_info (addr_exp, 1);
+}
+
+void
+nofp_registers_info (addr_exp, from_tty)
+     char *addr_exp;
+     int from_tty;
+{
+  registers_info (addr_exp, 0);
+}
+
+
+/*
+ * TODO:
+ * Should save/restore the tty state since it might be that the
+ * program to be debugged was started on this tty and it wants
+ * the tty in some state other than what we want.  If it's running
+ * on another terminal or without a terminal, then saving and
+ * restoring the tty state is a harmless no-op.
+ * This only needs to be done if we are attaching to a process.
+ */
+
+/*
+   attach_command --
+   takes a program started up outside of gdb and ``attaches'' to it.
+   This stops it cold in its tracks and allows us to start debugging it.
+   and wait for the trace-trap that results from attaching.  */
+
+void
+attach_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+#ifdef SOLIB_ADD
+  extern int auto_solib_add;
+#endif
+
+  char *  exec_file;
+  char *  full_exec_path = NULL;
+
+  dont_repeat ();			/* Not for the faint of heart */
+
+  if (target_has_execution)
+    {
+      if (query ("A program is being debugged already.  Kill it? "))
+	target_kill ();
+      else
+	error ("Not killed.");
+    }
+
+  target_attach (args, from_tty);
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* Set up execution context to know that we should return from
+     wait_for_inferior as soon as the target reports a stop.  */
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+  stop_soon_quietly = 1;
+
+  /* No traps are generated when attaching to inferior under Mach 3
+     or GNU hurd.  */
+#ifndef ATTACH_NO_WAIT
+  wait_for_inferior ();
+#endif
+
+  /*
+   * If no exec file is yet known, try to determine it from the
+   * process itself.
+   */
+  exec_file = (char *) get_exec_file (0);
+  if (! exec_file) {
+    exec_file = target_pid_to_exec_file (inferior_pid);
+    if (exec_file) {
+     /* It's possible we don't have a full path, but rather just a
+         filename.  Some targets, such as HP-UX, don't provide the
+         full path, sigh.
+
+         Attempt to qualify the filename against the source path.
+         (If that fails, we'll just fall back on the original
+         filename.  Not much more we can do...)
+         */
+      if (!source_full_path_of (exec_file, &full_exec_path))
+        full_exec_path = savestring (exec_file, strlen (exec_file));
+
+      exec_file_attach (full_exec_path, from_tty);
+      symbol_file_command (full_exec_path, from_tty);
+    }
+  }
+
+#ifdef SOLIB_ADD
+  if (auto_solib_add)
+    {
+      /* Add shared library symbols from the newly attached process, if any.  */
+      SOLIB_ADD ((char *)0, from_tty, &current_target);
+      re_enable_breakpoints_in_shlibs ();
+    }
+#endif
+
+  /* Take any necessary post-attaching actions for this platform.
+     */
+  target_post_attach (inferior_pid);
+
+  normal_stop ();
+}
+
+/*
+ * detach_command --
+ * takes a program previously attached to and detaches it.
+ * The program resumes execution and will no longer stop
+ * on signals, etc.  We better not have left any breakpoints
+ * in the program or it'll die when it hits one.  For this
+ * to work, it may be necessary for the process to have been
+ * previously attached.  It *might* work if the program was
+ * started via the normal ptrace (PTRACE_TRACEME).
+ */
+
+static void
+detach_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();			/* Not for the faint of heart */
+  target_detach (args, from_tty);
+#if defined(SOLIB_RESTART)
+  SOLIB_RESTART ();
+#endif
+}
+
+/* ARGSUSED */
+static void
+float_info (addr_exp, from_tty)
+     char *addr_exp;
+     int from_tty;
+{
+#ifdef FLOAT_INFO
+  FLOAT_INFO;
+#else
+  printf_filtered ("No floating point info available for this processor.\n");
+#endif
+}
+
+/* ARGSUSED */
+static void
+unset_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_filtered ("\"unset\" must be followed by the name of ");
+  printf_filtered ("an unset subcommand.\n");
+  help_list (unsetlist, "unset ", -1, gdb_stdout);
+}
+
+void
+_initialize_infcmd ()
+{
+  struct cmd_list_element *c;
+  
+  add_com ("tty", class_run, tty_command,
+	   "Set terminal for future runs of program being debugged.");
+
+  add_show_from_set
+    (add_set_cmd ("args", class_run, var_string_noescape, 
+		  (char *)&inferior_args,
+"Set argument list to give program being debugged when it is started.\n\
+Follow this command with any number of args, to be passed to the program.",
+		  &setlist),
+     &showlist);
+
+  c = add_cmd
+    ("environment", no_class, environment_info,
+     "The environment to give the program, or one variable's value.\n\
+With an argument VAR, prints the value of environment variable VAR to\n\
+give the program being debugged.  With no arguments, prints the entire\n\
+environment to be given to the program.", &showlist);
+  c->completer = noop_completer;
+
+  add_prefix_cmd ("unset", no_class, unset_command,
+		  "Complement to certain \"set\" commands",
+		  &unsetlist, "unset ", 0, &cmdlist);
+  
+  c = add_cmd ("environment", class_run, unset_environment_command,
+	      "Cancel environment variable VAR for the program.\n\
+This does not affect the program until the next \"run\" command.",
+	   &unsetlist);
+  c->completer = noop_completer;
+
+  c = add_cmd ("environment", class_run, set_environment_command,
+	       "Set environment variable value to give the program.\n\
+Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n\
+VALUES of environment variables are uninterpreted strings.\n\
+This does not affect the program until the next \"run\" command.",
+	   &setlist);
+  c->completer = noop_completer;
+ 
+  add_com ("path", class_files, path_command,
+       "Add directory DIR(s) to beginning of search path for object files.\n\
+$cwd in the path means the current working directory.\n\
+This path is equivalent to the $PATH shell variable.  It is a list of\n\
+directories, separated by colons.  These directories are searched to find\n\
+fully linked executable files and separately compiled object files as needed.");
+
+  c = add_cmd ("paths", no_class, path_info,
+	    "Current search path for finding object files.\n\
+$cwd in the path means the current working directory.\n\
+This path is equivalent to the $PATH shell variable.  It is a list of\n\
+directories, separated by colons.  These directories are searched to find\n\
+fully linked executable files and separately compiled object files as needed.",
+	       &showlist);
+  c->completer = noop_completer;
+
+ add_com ("attach", class_run, attach_command,
+ 	   "Attach to a process or file outside of GDB.\n\
+This command attaches to another target, of the same type as your last\n\
+\"target\" command (\"info files\" will show your target stack).\n\
+The command may take as argument a process id or a device file.\n\
+For a process id, you must have permission to send the process a signal,\n\
+and it must have the same effective uid as the debugger.\n\
+When using \"attach\" with a process id, the debugger finds the\n\
+program running in the process, looking first in the current working\n\
+directory, or (if not found there) using the source file search path\n\
+(see the \"directory\" command).  You can also use the \"file\" command\n\
+to specify the program, and to load its symbol table.");
+
+  add_com ("detach", class_run, detach_command,
+	   "Detach a process or file previously attached.\n\
+If a process, it is no longer traced, and it continues its execution.  If\n\
+you were debugging a file, the file is closed and gdb no longer accesses it.");
+
+  add_com ("signal", class_run, signal_command,
+	   "Continue program giving it signal specified by the argument.\n\
+An argument of \"0\" means continue program without giving it a signal.");
+
+  add_com ("stepi", class_run, stepi_command,
+	   "Step one instruction exactly.\n\
+Argument N means do this N times (or till program stops for another reason).");
+  add_com_alias ("si", "stepi", class_alias, 0);
+
+  add_com ("nexti", class_run, nexti_command,
+	   "Step one instruction, but proceed through subroutine calls.\n\
+Argument N means do this N times (or till program stops for another reason).");
+  add_com_alias ("ni", "nexti", class_alias, 0);
+
+  add_com ("finish", class_run, finish_command,
+	   "Execute until selected stack frame returns.\n\
+Upon return, the value returned is printed and put in the value history.");
+
+  add_com ("next", class_run, next_command,
+	   "Step program, proceeding through subroutine calls.\n\
+Like the \"step\" command as long as subroutine calls do not happen;\n\
+when they do, the call is treated as one instruction.\n\
+Argument N means do this N times (or till program stops for another reason).");
+  add_com_alias ("n", "next", class_run, 1);
+  if (xdb_commands)
+    add_com_alias("S", "next", class_run, 1);
+
+  add_com ("step", class_run, step_command,
+	   "Step program until it reaches a different source line.\n\
+Argument N means do this N times (or till program stops for another reason).");
+  add_com_alias ("s", "step", class_run, 1);
+
+  add_com ("until", class_run, until_command,
+"Execute until the program reaches a source line greater than the current\n\
+or a specified line or address or function (same args as break command).\n\
+Execution will also stop upon exit from the current stack frame.");
+  add_com_alias ("u", "until", class_run, 1);
+  
+  add_com ("jump", class_run, jump_command,
+	   "Continue program being debugged at specified line or address.\n\
+Give as argument either LINENUM or *ADDR, where ADDR is an expression\n\
+for an address to start at.");
+
+  add_com ("go", class_run, go_command,
+	   "Usage: go <location>\n\
+Continue program being debugged, stopping at specified line or \n\
+address.\n\
+Give as argument either LINENUM or *ADDR, where ADDR is an \n\
+expression for an address to start at.\n\
+This command is a combination of tbreak and jump.");
+  if (xdb_commands)
+    add_com_alias("g", "g", class_run, 1);
+
+  add_com ("continue", class_run, continue_command,
+	   "Continue program being debugged, after signal or breakpoint.\n\
+If proceeding from breakpoint, a number N may be used as an argument,\n\
+which means to set the ignore count of that breakpoint to N - 1 (so that\n\
+the breakpoint won't break until the Nth time it is reached).");
+  add_com_alias ("c", "cont", class_run, 1);
+  add_com_alias ("fg", "cont", class_run, 1);
+
+  add_com ("run", class_run, run_command,
+	   "Start debugged program.  You may specify arguments to give it.\n\
+Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\
+Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n\n\
+With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n\
+To cancel previous arguments and run with no arguments,\n\
+use \"set args\" without arguments.");
+  add_com_alias ("r", "run", class_run, 1);
+  if (xdb_commands)
+    add_com ("R", class_run, run_no_args_command,
+         "Start debugged program with no arguments.");
+
+  add_info ("registers", nofp_registers_info,
+    "List of integer registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register.");
+
+  if (xdb_commands)
+    add_com("lr", class_info, nofp_registers_info,
+    "List of integer registers and their contents, for selected stack frame.\n\
+  Register name as argument means describe only that register.");
+  add_info ("all-registers", all_registers_info,
+    "List of all registers and their contents, for selected stack frame.\n\
+Register name as argument means describe only that register.");
+
+  add_info ("program", program_info,
+	    "Execution status of the program.");
+
+  add_info ("float", float_info,
+	    "Print the status of the floating point unit\n");
+
+  inferior_args = savestring ("", 1);	/* Initially no args */
+  inferior_environ = make_environ ();
+  init_environ (inferior_environ);
+}
diff --git a/gdb/inferior.h b/gdb/inferior.h
new file mode 100644
index 0000000..fa59c2a
--- /dev/null
+++ b/gdb/inferior.h
@@ -0,0 +1,473 @@
+/* Variables that describe the inferior process running under GDB:
+   Where it is, why it stopped, and how to step it.
+   Copyright 1986, 1989, 1992, 1996, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (INFERIOR_H)
+#define INFERIOR_H 1
+
+/* For bpstat.  */
+#include "breakpoint.h"
+
+/* For enum target_signal.  */
+#include "target.h"
+
+/* Structure in which to save the status of the inferior.  Save
+   through "save_inferior_status", restore through
+   "restore_inferior_status".
+   This pair of routines should be called around any transfer of
+   control to the inferior which you don't want showing up in your
+   control variables.  */
+
+struct inferior_status
+  {
+    enum target_signal stop_signal;
+    CORE_ADDR stop_pc;
+    bpstat stop_bpstat;
+    int stop_step;
+    int stop_stack_dummy;
+    int stopped_by_random_signal;
+    int trap_expected;
+    CORE_ADDR step_range_start;
+    CORE_ADDR step_range_end;
+    CORE_ADDR step_frame_address;
+    int step_over_calls;
+    CORE_ADDR step_resume_break_address;
+    int stop_after_trap;
+    int stop_soon_quietly;
+    CORE_ADDR selected_frame_address;
+    char stop_registers[REGISTER_BYTES];
+
+    /* These are here because if call_function_by_hand has written some
+     registers and then decides to call error(), we better not have changed
+     any registers.  */
+    char registers[REGISTER_BYTES];
+
+    int selected_level;
+    int breakpoint_proceeded;
+    int restore_stack_info;
+    int proceed_to_finish;
+  };
+
+/* This macro gives the number of registers actually in use by the
+   inferior.  This may be less than the total number of registers,
+   perhaps depending on the actual CPU in use or program being run.  */
+
+#ifndef ARCH_NUM_REGS
+#define ARCH_NUM_REGS NUM_REGS
+#endif
+
+extern void save_inferior_status PARAMS ((struct inferior_status *, int));
+
+extern void restore_inferior_status PARAMS ((struct inferior_status *));
+
+extern void set_sigint_trap PARAMS ((void));
+
+extern void clear_sigint_trap PARAMS ((void));
+
+extern void set_sigio_trap PARAMS ((void));
+
+extern void clear_sigio_trap PARAMS ((void));
+
+/* File name for default use for standard in/out in the inferior.  */
+
+extern char *inferior_io_terminal;
+
+/* Pid of our debugged inferior, or 0 if no inferior now.  */
+
+extern int inferior_pid;
+
+/* This is only valid when inferior_pid is non-zero.
+
+   If this is 0, then exec events should be noticed and responded to
+   by the debugger (i.e., be reported to the user).
+
+   If this is > 0, then that many subsequent exec events should be
+   ignored (i.e., not be reported to the user).
+   */
+extern int inferior_ignoring_startup_exec_events;
+
+/* This is only valid when inferior_ignoring_startup_exec_events is
+   zero.
+
+   Some targets (stupidly) report more than one exec event per actual
+   call to an event() system call.  If only the last such exec event
+   need actually be noticed and responded to by the debugger (i.e.,
+   be reported to the user), then this is the number of "leading"
+   exec events which should be ignored.
+   */
+extern int inferior_ignoring_leading_exec_events;
+
+/* Inferior environment. */
+
+extern struct environ *inferior_environ;
+
+/* Character array containing an image of the inferior programs' registers.  */
+
+extern char registers[];
+
+/* Array of validity bits (one per register).  Nonzero at position XXX_REGNUM
+   means that `registers' contains a valid copy of inferior register XXX.
+   -1 if register value is not available. */
+
+extern SIGNED char register_valid[NUM_REGS];
+
+extern void clear_proceed_status PARAMS ((void));
+
+extern void proceed PARAMS ((CORE_ADDR, enum target_signal, int));
+
+extern void kill_inferior PARAMS ((void));
+
+extern void generic_mourn_inferior PARAMS ((void));
+
+extern void terminal_ours PARAMS ((void));
+
+extern int run_stack_dummy PARAMS ((CORE_ADDR, char[REGISTER_BYTES]));
+
+extern CORE_ADDR read_pc PARAMS ((void));
+
+extern CORE_ADDR read_pc_pid PARAMS ((int));
+
+extern void write_pc PARAMS ((CORE_ADDR));
+
+extern void write_pc_pid PARAMS ((CORE_ADDR, int));
+
+extern CORE_ADDR read_sp PARAMS ((void));
+
+extern void write_sp PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR read_fp PARAMS ((void));
+
+extern void write_fp PARAMS ((CORE_ADDR));
+
+extern void wait_for_inferior PARAMS ((void));
+
+extern void init_wait_for_inferior PARAMS ((void));
+
+extern void close_exec_file PARAMS ((void));
+
+extern void reopen_exec_file PARAMS ((void));
+
+/* The `resume' routine should only be called in special circumstances.
+   Normally, use `proceed', which handles a lot of bookkeeping.  */
+
+extern void resume PARAMS ((int, enum target_signal));
+
+/* From misc files */
+
+extern void store_inferior_registers PARAMS ((int));
+
+extern void fetch_inferior_registers PARAMS ((int));
+
+extern void solib_create_inferior_hook PARAMS ((void));
+
+extern void child_terminal_info PARAMS ((char *, int));
+
+extern void term_info PARAMS ((char *, int));
+
+extern void terminal_ours_for_output PARAMS ((void));
+
+extern void terminal_inferior PARAMS ((void));
+
+extern void terminal_init_inferior PARAMS ((void));
+
+extern void terminal_init_inferior_with_pgrp PARAMS ((int pgrp));
+
+/* From infptrace.c or infttrace.c */
+
+extern int attach PARAMS ((int));
+
+#if !defined(REQUIRE_ATTACH)
+#define REQUIRE_ATTACH attach
+#endif
+
+#if !defined(REQUIRE_DETACH)
+#define REQUIRE_DETACH(pid,siggnal) detach (siggnal)
+#endif
+
+extern void detach PARAMS ((int));
+
+int ptrace_wait PARAMS ((int, int *));
+
+extern void child_resume PARAMS ((int, int, enum target_signal));
+
+#ifndef PTRACE_ARG3_TYPE
+#define PTRACE_ARG3_TYPE int	/* Correct definition for most systems. */
+#endif
+
+extern int call_ptrace PARAMS ((int, int, PTRACE_ARG3_TYPE, int));
+
+extern void pre_fork_inferior PARAMS ((void));
+
+/* From procfs.c */
+
+extern int proc_iterate_over_mappings PARAMS ((int (*)(int, CORE_ADDR)));
+
+extern int procfs_first_available PARAMS ((void));
+
+extern int procfs_get_pid_fd PARAMS ((int));
+
+/* From fork-child.c */
+
+extern void fork_inferior PARAMS ((char *, char *, char **,
+				   void (*)(void),
+				   void (*)(int),
+				   void (*)(void),
+				   char *));
+
+
+extern void
+clone_and_follow_inferior PARAMS ((int, int *));
+
+extern void startup_inferior PARAMS ((int));
+
+/* From inflow.c */
+
+extern void new_tty_prefork PARAMS ((char *));
+
+extern int gdb_has_a_terminal PARAMS ((void));
+
+/* From infrun.c */
+
+extern void start_remote PARAMS ((void));
+
+extern void normal_stop PARAMS ((void));
+
+extern int signal_stop_state PARAMS ((int));
+
+extern int signal_print_state PARAMS ((int));
+
+extern int signal_pass_state PARAMS ((int));
+
+/* From infcmd.c */
+
+extern void tty_command PARAMS ((char *, int));
+
+extern void attach_command PARAMS ((char *, int));
+
+/* Last signal that the inferior received (why it stopped).  */
+
+extern enum target_signal stop_signal;
+
+/* Address at which inferior stopped.  */
+
+extern CORE_ADDR stop_pc;
+
+/* Chain containing status of breakpoint(s) that we have stopped at.  */
+
+extern bpstat stop_bpstat;
+
+/* Flag indicating that a command has proceeded the inferior past the
+   current breakpoint.  */
+
+extern int breakpoint_proceeded;
+
+/* Nonzero if stopped due to a step command.  */
+
+extern int stop_step;
+
+/* Nonzero if stopped due to completion of a stack dummy routine.  */
+
+extern int stop_stack_dummy;
+
+/* Nonzero if program stopped due to a random (unexpected) signal in
+   inferior process.  */
+
+extern int stopped_by_random_signal;
+
+/* Range to single step within.
+   If this is nonzero, respond to a single-step signal
+   by continuing to step if the pc is in this range.
+
+   If step_range_start and step_range_end are both 1, it means to step for
+   a single instruction (FIXME: it might clean up wait_for_inferior in a
+   minor way if this were changed to the address of the instruction and
+   that address plus one.  But maybe not.).  */
+
+extern CORE_ADDR step_range_start;	/* Inclusive */
+extern CORE_ADDR step_range_end;/* Exclusive */
+
+/* Stack frame address as of when stepping command was issued.
+   This is how we know when we step into a subroutine call,
+   and how to set the frame for the breakpoint used to step out.  */
+
+extern CORE_ADDR step_frame_address;
+
+/* Our notion of the current stack pointer.  */
+
+extern CORE_ADDR step_sp;
+
+/* 1 means step over all subroutine calls.
+   -1 means step over calls to undebuggable functions.  */
+
+extern int step_over_calls;
+
+/* If stepping, nonzero means step count is > 1
+   so don't print frame next time inferior stops
+   if it stops due to stepping.  */
+
+extern int step_multi;
+
+/* Nonzero means expecting a trap and caller will handle it themselves.
+   It is used after attach, due to attaching to a process;
+   when running in the shell before the child program has been exec'd;
+   and when running some kinds of remote stuff (FIXME?).  */
+
+extern int stop_soon_quietly;
+
+/* Nonzero if proceed is being used for a "finish" command or a similar
+   situation when stop_registers should be saved.  */
+
+extern int proceed_to_finish;
+
+/* Save register contents here when about to pop a stack dummy frame,
+   if-and-only-if proceed_to_finish is set.
+   Thus this contains the return value from the called function (assuming
+   values are returned in a register).  */
+
+extern char stop_registers[REGISTER_BYTES];
+
+/* Nonzero if the child process in inferior_pid was attached rather
+   than forked.  */
+
+extern int attach_flag;
+
+/* Sigtramp is a routine that the kernel calls (which then calls the
+   signal handler).  On most machines it is a library routine that
+   is linked into the executable.
+
+   This macro, given a program counter value and the name of the
+   function in which that PC resides (which can be null if the
+   name is not known), returns nonzero if the PC and name show
+   that we are in sigtramp.
+
+   On most machines just see if the name is sigtramp (and if we have
+   no name, assume we are not in sigtramp).  */
+#if !defined (IN_SIGTRAMP)
+#if defined (SIGTRAMP_START)
+#define IN_SIGTRAMP(pc, name) \
+       ((pc) >= SIGTRAMP_START(pc)   \
+        && (pc) < SIGTRAMP_END(pc) \
+        )
+#else
+#define IN_SIGTRAMP(pc, name) \
+       (name && STREQ ("_sigtramp", name))
+#endif
+#endif
+
+/* Possible values for CALL_DUMMY_LOCATION.  */
+#define ON_STACK 1
+#define BEFORE_TEXT_END 2
+#define AFTER_TEXT_END 3
+#define AT_ENTRY_POINT 4
+
+#if !defined (CALL_DUMMY_LOCATION)
+#define CALL_DUMMY_LOCATION ON_STACK
+#endif /* No CALL_DUMMY_LOCATION.  */
+
+/* Are we in a call dummy?  The code below which allows DECR_PC_AFTER_BREAK
+   below is for infrun.c, which may give the macro a pc without that
+   subtracted out.  */
+#if !defined (PC_IN_CALL_DUMMY)
+#if CALL_DUMMY_LOCATION == BEFORE_TEXT_END
+extern CORE_ADDR text_end;
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address) \
+  ((pc) >= text_end - CALL_DUMMY_LENGTH         \
+   && (pc) <= text_end + DECR_PC_AFTER_BREAK)
+#endif /* Before text_end.  */
+
+#if CALL_DUMMY_LOCATION == AFTER_TEXT_END
+extern CORE_ADDR text_end;
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address) \
+  ((pc) >= text_end   \
+   && (pc) <= text_end + CALL_DUMMY_LENGTH + DECR_PC_AFTER_BREAK)
+#endif /* After text_end.  */
+
+#if CALL_DUMMY_LOCATION == ON_STACK
+/* Is the PC in a call dummy?  SP and FRAME_ADDRESS are the bottom and
+   top of the stack frame which we are checking, where "bottom" and
+   "top" refer to some section of memory which contains the code for
+   the call dummy.  Calls to this macro assume that the contents of
+   SP_REGNUM and FP_REGNUM (or the saved values thereof), respectively,
+   are the things to pass.
+
+   This won't work on the 29k, where SP_REGNUM and FP_REGNUM don't
+   have that meaning, but the 29k doesn't use ON_STACK.  This could be
+   fixed by generalizing this scheme, perhaps by passing in a frame
+   and adding a few fields, at least on machines which need them for
+   PC_IN_CALL_DUMMY.
+
+   Something simpler, like checking for the stack segment, doesn't work,
+   since various programs (threads implementations, gcc nested function
+   stubs, etc) may either allocate stack frames in another segment, or
+   allocate other kinds of code on the stack.  */
+
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address) \
+  (INNER_THAN ((sp), (pc)) && (frame_address != 0) && INNER_THAN ((pc), (frame_address)))
+#endif /* On stack.  */
+
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+#define PC_IN_CALL_DUMMY(pc, sp, frame_address)			\
+  ((pc) >= CALL_DUMMY_ADDRESS ()				\
+   && (pc) <= (CALL_DUMMY_ADDRESS () + DECR_PC_AFTER_BREAK))
+#endif /* At entry point.  */
+#endif /* No PC_IN_CALL_DUMMY.  */
+
+/* It's often not enough for our clients to know whether the PC is merely
+   somewhere within the call dummy.  They may need to know whether the
+   call dummy has actually completed.  (For example, wait_for_inferior
+   wants to know when it should truly stop because the call dummy has
+   completed.  If we're single-stepping because of slow watchpoints,
+   then we may find ourselves stopped at the entry of the call dummy,
+   and want to continue stepping until we reach the end.)
+
+   Note that this macro is intended for targets (like HP-UX) which
+   require more than a single breakpoint in their call dummies, and
+   therefore cannot use the CALL_DUMMY_BREAKPOINT_OFFSET mechanism.
+
+   If a target does define CALL_DUMMY_BREAKPOINT_OFFSET, then this
+   default implementation of CALL_DUMMY_HAS_COMPLETED is sufficient.
+   Else, a target may wish to supply an implementation that works in
+   the presense of multiple breakpoints in its call dummy.
+   */
+#if !defined(CALL_DUMMY_HAS_COMPLETED)
+#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
+  PC_IN_CALL_DUMMY((pc), (sp), (frame_address))
+#endif
+
+/* If STARTUP_WITH_SHELL is set, GDB's "run"
+   will attempts to start up the debugee under a shell.
+   This is in order for argument-expansion to occur. E.g.,
+   (gdb) run *
+   The "*" gets expanded by the shell into a list of files.
+   While this is a nice feature, it turns out to interact badly
+   with some of the catch-fork/catch-exec features we have added.
+   In particular, if the shell does any fork/exec's before
+   the exec of the target program, that can confuse GDB.
+   To disable this feature, set STARTUP_WITH_SHELL to 0.
+   To enable this feature, set STARTUP_WITH_SHELL to 1.
+   The catch-exec traps expected during start-up will
+   be 1 if target is not started up with a shell, 2 if it is.
+   - RT
+   If you disable this, you need to decrement
+   START_INFERIOR_TRAPS_EXPECTED in tm.h. */
+#define STARTUP_WITH_SHELL 1
+#if !defined(START_INFERIOR_TRAPS_EXPECTED)
+#define START_INFERIOR_TRAPS_EXPECTED	2
+#endif
+#endif /* !defined (INFERIOR_H) */
diff --git a/gdb/inflow.c b/gdb/inflow.c
new file mode 100644
index 0000000..9033675
--- /dev/null
+++ b/gdb/inflow.c
@@ -0,0 +1,751 @@
+/* Low level interface to ptrace, for GDB when running under Unix.
+   Copyright 1986-87, 1989, 1991-92, 1995, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "command.h"
+#include "signals.h"
+#include "serial.h"
+#include "terminal.h"
+#include "target.h"
+#include "gdbthread.h"
+
+#include "gdb_string.h"
+#include <signal.h>
+#include <fcntl.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_TERMIOS
+#define PROCESS_GROUP_TYPE pid_t
+#endif
+
+#ifdef HAVE_TERMIO
+#define PROCESS_GROUP_TYPE int
+#endif
+
+#ifdef HAVE_SGTTY
+#ifdef SHORT_PGRP
+/* This is only used for the ultra.  Does it have pid_t?  */
+#define PROCESS_GROUP_TYPE short
+#else
+#define PROCESS_GROUP_TYPE int
+#endif
+#endif /* sgtty */
+
+#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
+static void
+handle_sigio PARAMS ((int));
+#endif
+
+static void
+pass_signal PARAMS ((int));
+
+static void
+kill_command PARAMS ((char *, int));
+
+static void
+terminal_ours_1 PARAMS ((int));
+
+/* Record terminal status separately for debugger and inferior.  */
+
+static serial_t stdin_serial;
+
+/* TTY state for the inferior.  We save it whenever the inferior stops, and
+   restore it when it resumes.  */
+static serial_ttystate inferior_ttystate;
+
+/* Our own tty state, which we restore every time we need to deal with the
+   terminal.  We only set it once, when GDB first starts.  The settings of
+   flags which readline saves and restores and unimportant.  */
+static serial_ttystate our_ttystate;
+
+/* fcntl flags for us and the inferior.  Saved and restored just like
+   {our,inferior}_ttystate.  */
+static int tflags_inferior;
+static int tflags_ours;
+
+#ifdef PROCESS_GROUP_TYPE
+/* Process group for us and the inferior.  Saved and restored just like
+   {our,inferior}_ttystate.  */
+PROCESS_GROUP_TYPE our_process_group;
+PROCESS_GROUP_TYPE inferior_process_group;
+#endif
+
+/* While the inferior is running, we want SIGINT and SIGQUIT to go to the
+   inferior only.  If we have job control, that takes care of it.  If not,
+   we save our handlers in these two variables and set SIGINT and SIGQUIT
+   to SIG_IGN.  */
+
+static void (*sigint_ours) ();
+static void (*sigquit_ours) ();
+
+/* The name of the tty (from the `tty' command) that we gave to the inferior
+   when it was last started.  */
+
+static char *inferior_thisrun_terminal;
+
+/* Nonzero if our terminal settings are in effect.  Zero if the
+   inferior's settings are in effect.  Ignored if !gdb_has_a_terminal
+   ().  */
+
+int terminal_is_ours;
+
+enum {yes, no, have_not_checked} gdb_has_a_terminal_flag = have_not_checked;
+
+/* Does GDB have a terminal (on stdin)?  */
+int
+gdb_has_a_terminal ()
+{
+  switch (gdb_has_a_terminal_flag)
+    {
+    case yes:
+      return 1;
+    case no:
+      return 0;
+    case have_not_checked:
+      /* Get all the current tty settings (including whether we have a tty at
+	 all!).  Can't do this in _initialize_inflow because SERIAL_FDOPEN
+	 won't work until the serial_ops_list is initialized.  */
+
+#ifdef F_GETFL
+      tflags_ours = fcntl (0, F_GETFL, 0);
+#endif
+
+      gdb_has_a_terminal_flag = no;
+      stdin_serial = SERIAL_FDOPEN (0);
+      if (stdin_serial != NULL)
+	{
+	  our_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
+
+	  if (our_ttystate != NULL)
+	    {
+	      gdb_has_a_terminal_flag = yes;
+#ifdef HAVE_TERMIOS
+	      our_process_group = tcgetpgrp (0);
+#endif
+#ifdef HAVE_TERMIO
+	      our_process_group = getpgrp ();
+#endif
+#ifdef HAVE_SGTTY
+	      ioctl (0, TIOCGPGRP, &our_process_group);
+#endif
+	    }
+	}
+
+      return gdb_has_a_terminal_flag == yes;
+    default:
+      /* "Can't happen".  */
+      return 0;
+    }
+}
+
+/* Macro for printing errors from ioctl operations */
+
+#define	OOPSY(what)	\
+  if (result == -1)	\
+    fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \
+	    what, strerror (errno))
+
+static void terminal_ours_1 PARAMS ((int));
+
+/* Initialize the terminal settings we record for the inferior,
+   before we actually run the inferior.  */
+
+void
+terminal_init_inferior_with_pgrp (pgrp)
+     int pgrp;
+{
+  if (gdb_has_a_terminal ())
+    {
+      /* We could just as well copy our_ttystate (if we felt like adding
+	 a new function SERIAL_COPY_TTY_STATE).  */
+      if (inferior_ttystate)
+	free (inferior_ttystate);
+      inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
+
+#ifdef PROCESS_GROUP_TYPE
+      inferior_process_group = pgrp;
+#endif
+
+      /* Make sure that next time we call terminal_inferior (which will be
+	 before the program runs, as it needs to be), we install the new
+	 process group.  */
+      terminal_is_ours = 1;
+    }
+}
+
+void
+terminal_init_inferior ()
+{
+#ifdef PROCESS_GROUP_TYPE
+  /* This is for Lynx, and should be cleaned up by having Lynx be a separate
+     debugging target with a version of target_terminal_init_inferior which
+     passes in the process group to a generic routine which does all the work
+     (and the non-threaded child_terminal_init_inferior can just pass in
+     inferior_pid to the same routine).  */
+  /* We assume INFERIOR_PID is also the child's process group.  */
+  terminal_init_inferior_with_pgrp (PIDGET (inferior_pid));
+#endif /* PROCESS_GROUP_TYPE */
+}
+
+/* Put the inferior's terminal settings into effect.
+   This is preparation for starting or resuming the inferior.  */
+
+void
+terminal_inferior ()
+{
+  if (gdb_has_a_terminal () && terminal_is_ours
+      && inferior_thisrun_terminal == 0)
+    {
+      int result;
+
+#ifdef F_GETFL
+      /* Is there a reason this is being done twice?  It happens both
+	 places we use F_SETFL, so I'm inclined to think perhaps there
+	 is some reason, however perverse.  Perhaps not though...  */
+      result = fcntl (0, F_SETFL, tflags_inferior);
+      result = fcntl (0, F_SETFL, tflags_inferior);
+      OOPSY ("fcntl F_SETFL");
+#endif
+
+      /* Because we were careful to not change in or out of raw mode in
+	 terminal_ours, we will not change in our out of raw mode with
+	 this call, so we don't flush any input.  */
+      result = SERIAL_SET_TTY_STATE (stdin_serial, inferior_ttystate);
+      OOPSY ("setting tty state");
+
+      if (!job_control)
+	{
+	  sigint_ours = (void (*) ()) signal (SIGINT, SIG_IGN);
+#ifdef SIGQUIT
+	  sigquit_ours = (void (*) ()) signal (SIGQUIT, SIG_IGN);
+#endif
+	}
+
+      /* If attach_flag is set, we don't know whether we are sharing a
+	 terminal with the inferior or not.  (attaching a process
+	 without a terminal is one case where we do not; attaching a
+	 process which we ran from the same shell as GDB via `&' is
+	 one case where we do, I think (but perhaps this is not
+	 `sharing' in the sense that we need to save and restore tty
+	 state)).  I don't know if there is any way to tell whether we
+	 are sharing a terminal.  So what we do is to go through all
+	 the saving and restoring of the tty state, but ignore errors
+	 setting the process group, which will happen if we are not
+	 sharing a terminal).  */
+
+      if (job_control)
+	{
+#ifdef HAVE_TERMIOS
+	  result = tcsetpgrp (0, inferior_process_group);
+	  if (!attach_flag)
+	    OOPSY ("tcsetpgrp");
+#endif
+
+#ifdef HAVE_SGTTY
+	  result = ioctl (0, TIOCSPGRP, &inferior_process_group);
+	  if (!attach_flag)
+	    OOPSY ("TIOCSPGRP");
+#endif
+	}
+
+    }
+  terminal_is_ours = 0;
+}
+
+/* Put some of our terminal settings into effect,
+   enough to get proper results from our output,
+   but do not change into or out of RAW mode
+   so that no input is discarded.
+
+   After doing this, either terminal_ours or terminal_inferior
+   should be called to get back to a normal state of affairs.  */
+
+void
+terminal_ours_for_output ()
+{
+  terminal_ours_1 (1);
+}
+
+/* Put our terminal settings into effect.
+   First record the inferior's terminal settings
+   so they can be restored properly later.  */
+
+void
+terminal_ours ()
+{
+  terminal_ours_1 (0);
+}
+
+/* output_only is not used, and should not be used unless we introduce
+   separate terminal_is_ours and terminal_is_ours_for_output
+   flags.  */
+
+static void
+terminal_ours_1 (output_only)
+     int output_only;
+{
+  /* Checking inferior_thisrun_terminal is necessary so that
+     if GDB is running in the background, it won't block trying
+     to do the ioctl()'s below.  Checking gdb_has_a_terminal
+     avoids attempting all the ioctl's when running in batch.  */
+  if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0)
+    return;
+
+  if (!terminal_is_ours)
+    {
+      /* Ignore this signal since it will happen when we try to set the
+	 pgrp.  */
+      void (*osigttou) ();
+      int result;
+
+      terminal_is_ours = 1;
+
+#ifdef SIGTTOU
+      if (job_control)
+	osigttou = (void (*) ()) signal (SIGTTOU, SIG_IGN);
+#endif
+
+      if (inferior_ttystate)
+	free (inferior_ttystate);
+      inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
+#ifdef HAVE_TERMIOS
+      inferior_process_group = tcgetpgrp (0);
+#endif
+#ifdef HAVE_TERMIO
+      inferior_process_group = getpgrp ();
+#endif
+#ifdef HAVE_SGTTY
+      ioctl (0, TIOCGPGRP, &inferior_process_group);
+#endif
+
+      /* Here we used to set ICANON in our ttystate, but I believe this
+	 was an artifact from before when we used readline.  Readline sets
+	 the tty state when it needs to.
+	 FIXME-maybe: However, query() expects non-raw mode and doesn't
+	 use readline.  Maybe query should use readline (on the other hand,
+	 this only matters for HAVE_SGTTY, not termio or termios, I think).  */
+
+      /* Set tty state to our_ttystate.  We don't change in our out of raw
+	 mode, to avoid flushing input.  We need to do the same thing
+	 regardless of output_only, because we don't have separate
+	 terminal_is_ours and terminal_is_ours_for_output flags.  It's OK,
+	 though, since readline will deal with raw mode when/if it needs to.
+	 */
+
+      SERIAL_NOFLUSH_SET_TTY_STATE (stdin_serial, our_ttystate,
+				    inferior_ttystate);
+
+      if (job_control)
+	{
+#ifdef HAVE_TERMIOS
+	  result = tcsetpgrp (0, our_process_group);
+#if 0
+	  /* This fails on Ultrix with EINVAL if you run the testsuite
+	     in the background with nohup, and then log out.  GDB never
+	     used to check for an error here, so perhaps there are other
+	     such situations as well.  */
+	  if (result == -1)
+	    fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n",
+		     strerror (errno));
+#endif
+#endif /* termios */
+
+#ifdef HAVE_SGTTY
+	  result = ioctl (0, TIOCSPGRP, &our_process_group);
+#endif
+	}
+
+#ifdef SIGTTOU
+      if (job_control)
+	signal (SIGTTOU, osigttou);
+#endif
+
+      if (!job_control)
+	{
+	  signal (SIGINT, sigint_ours);
+#ifdef SIGQUIT
+	  signal (SIGQUIT, sigquit_ours);
+#endif
+	}
+
+#ifdef F_GETFL
+      tflags_inferior = fcntl (0, F_GETFL, 0);
+
+      /* Is there a reason this is being done twice?  It happens both
+	 places we use F_SETFL, so I'm inclined to think perhaps there
+	 is some reason, however perverse.  Perhaps not though...  */
+      result = fcntl (0, F_SETFL, tflags_ours);
+      result = fcntl (0, F_SETFL, tflags_ours);
+#endif
+
+      result = result;	/* lint */
+    }
+}
+
+/* ARGSUSED */
+void
+term_info (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  target_terminal_info (arg, from_tty);
+}
+
+/* ARGSUSED */
+void
+child_terminal_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (!gdb_has_a_terminal ())
+    {
+      printf_filtered ("This GDB does not control a terminal.\n");
+      return;
+    }
+
+  printf_filtered ("Inferior's terminal status (currently saved by GDB):\n");
+
+  /* First the fcntl flags.  */
+  {
+    int flags;
+    
+    flags = tflags_inferior;
+
+    printf_filtered ("File descriptor flags = ");
+
+#ifndef O_ACCMODE
+#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
+#endif
+    /* (O_ACCMODE) parens are to avoid Ultrix header file bug */
+    switch (flags & (O_ACCMODE))
+      {
+      case O_RDONLY: printf_filtered ("O_RDONLY"); break;
+      case O_WRONLY: printf_filtered ("O_WRONLY"); break;
+      case O_RDWR: printf_filtered ("O_RDWR"); break;
+      }
+    flags &= ~(O_ACCMODE);
+
+#ifdef O_NONBLOCK
+    if (flags & O_NONBLOCK) 
+      printf_filtered (" | O_NONBLOCK");
+    flags &= ~O_NONBLOCK;
+#endif
+    
+#if defined (O_NDELAY)
+    /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will
+       print it as O_NONBLOCK, which is good cause that is what POSIX
+       has, and the flag will already be cleared by the time we get here.  */
+    if (flags & O_NDELAY)
+      printf_filtered (" | O_NDELAY");
+    flags &= ~O_NDELAY;
+#endif
+
+    if (flags & O_APPEND)
+      printf_filtered (" | O_APPEND");
+    flags &= ~O_APPEND;
+
+#if defined (O_BINARY)
+    if (flags & O_BINARY)
+      printf_filtered (" | O_BINARY");
+    flags &= ~O_BINARY;
+#endif
+
+    if (flags)
+      printf_filtered (" | 0x%x", flags);
+    printf_filtered ("\n");
+  }
+
+#ifdef PROCESS_GROUP_TYPE
+  printf_filtered ("Process group = %d\n", inferior_process_group);
+#endif
+
+  SERIAL_PRINT_TTY_STATE (stdin_serial, inferior_ttystate);
+}
+
+/* NEW_TTY_PREFORK is called before forking a new child process,
+   so we can record the state of ttys in the child to be formed.
+   TTYNAME is null if we are to share the terminal with gdb;
+   or points to a string containing the name of the desired tty.
+
+   NEW_TTY is called in new child processes under Unix, which will
+   become debugger target processes.  This actually switches to
+   the terminal specified in the NEW_TTY_PREFORK call.  */
+
+void
+new_tty_prefork (ttyname)
+     char *ttyname;
+{
+  /* Save the name for later, for determining whether we and the child
+     are sharing a tty.  */
+  inferior_thisrun_terminal = ttyname;
+}
+
+void
+new_tty ()
+{
+  register int tty;
+
+  if (inferior_thisrun_terminal == 0)
+    return;
+#if !defined(__GO32__) && !defined(_WIN32)
+#ifdef TIOCNOTTY
+  /* Disconnect the child process from our controlling terminal.  On some
+     systems (SVR4 for example), this may cause a SIGTTOU, so temporarily
+     ignore SIGTTOU. */
+  tty = open("/dev/tty", O_RDWR);
+  if (tty > 0)
+    {
+      void (*osigttou) ();
+
+      osigttou = (void (*)()) signal(SIGTTOU, SIG_IGN);
+      ioctl(tty, TIOCNOTTY, 0);
+      close(tty);
+      signal(SIGTTOU, osigttou);
+    }
+#endif
+
+  /* Now open the specified new terminal.  */
+
+#ifdef USE_O_NOCTTY
+  tty = open(inferior_thisrun_terminal, O_RDWR | O_NOCTTY);
+#else
+  tty = open(inferior_thisrun_terminal, O_RDWR);
+#endif
+  if (tty == -1)
+    {
+      print_sys_errmsg (inferior_thisrun_terminal, errno);
+      _exit(1);
+    }
+
+  /* Avoid use of dup2; doesn't exist on all systems.  */
+  if (tty != 0)
+    { close (0); dup (tty); }
+  if (tty != 1)
+    { close (1); dup (tty); }
+  if (tty != 2)
+    { close (2); dup (tty); }
+  if (tty > 2)
+    close(tty);
+#endif /* !go32 && !win32*/
+}
+
+/* Kill the inferior process.  Make us have no inferior.  */
+
+/* ARGSUSED */
+static void
+kill_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  /* FIXME:  This should not really be inferior_pid (or target_has_execution).
+     It should be a distinct flag that indicates that a target is active, cuz
+     some targets don't have processes! */
+
+  if (inferior_pid == 0)
+    error ("The program is not being run.");
+  if (!query ("Kill the program being debugged? "))
+    error ("Not confirmed.");
+  target_kill ();
+
+  init_thread_list();		/* Destroy thread info */
+
+  /* Killing off the inferior can leave us with a core file.  If so,
+     print the state we are left in.  */
+  if (target_has_stack) {
+    printf_filtered ("In %s,\n", target_longname);
+    if (selected_frame == NULL)
+      fputs_filtered ("No selected stack frame.\n", gdb_stdout);
+    else
+      print_stack_frame (selected_frame, selected_frame_level, 1);
+  }
+}
+
+/* Call set_sigint_trap when you need to pass a signal on to an attached
+   process when handling SIGINT */
+
+/* ARGSUSED */
+static void
+pass_signal (signo)
+    int signo;
+{
+#ifndef _WIN32
+  kill (PIDGET (inferior_pid), SIGINT);
+#endif
+}
+
+static void (*osig)();
+
+void
+set_sigint_trap()
+{
+  if (attach_flag || inferior_thisrun_terminal)
+    {
+      osig = (void (*) ()) signal (SIGINT, pass_signal);
+    }
+}
+
+void
+clear_sigint_trap()
+{
+  if (attach_flag || inferior_thisrun_terminal)
+    {
+      signal (SIGINT, osig);
+    }
+}
+
+#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
+static void (*old_sigio) ();
+
+static void
+handle_sigio (signo)
+     int signo;
+{
+  int numfds;
+  fd_set readfds;
+
+  signal (SIGIO, handle_sigio);
+
+  FD_ZERO (&readfds);
+  FD_SET (target_activity_fd, &readfds);
+  numfds = select (target_activity_fd + 1, &readfds, NULL, NULL, NULL);
+  if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds))
+    {
+#ifndef _WIN32
+      if ((*target_activity_function) ())
+	kill (inferior_pid, SIGINT);
+#endif
+    }
+}
+
+static int old_fcntl_flags;
+
+void
+set_sigio_trap ()
+{
+  if (target_activity_function)
+    {
+      old_sigio = (void (*) ()) signal (SIGIO, handle_sigio);
+      fcntl (target_activity_fd, F_SETOWN, getpid()); 
+      old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0);
+      fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC);
+    }
+}
+
+void
+clear_sigio_trap ()
+{
+  if (target_activity_function)
+    {
+      signal (SIGIO, old_sigio);
+      fcntl (target_activity_fd, F_SETFL, old_fcntl_flags);
+    }
+}
+#else /* No SIGIO.  */
+void
+set_sigio_trap ()
+{
+  if (target_activity_function)
+    abort ();
+}
+
+void
+clear_sigio_trap ()
+{
+  if (target_activity_function)
+    abort ();
+}
+#endif /* No SIGIO.  */
+
+
+/* This is here because this is where we figure out whether we (probably)
+   have job control.  Just using job_control only does part of it because
+   setpgid or setpgrp might not exist on a system without job control.
+   It might be considered misplaced (on the other hand, process groups and
+   job control are closely related to ttys).
+
+   For a more clean implementation, in libiberty, put a setpgid which merely
+   calls setpgrp and a setpgrp which does nothing (any system with job control
+   will have one or the other).  */
+int
+gdb_setpgid ()
+{
+  int retval = 0;
+
+  if (job_control)
+    {
+#if defined (NEED_POSIX_SETPGID) || (defined (HAVE_TERMIOS) && defined (HAVE_SETPGID))
+      /* setpgid (0, 0) is supposed to work and mean the same thing as
+	 this, but on Ultrix 4.2A it fails with EPERM (and
+	 setpgid (getpid (), getpid ()) succeeds).  */
+      retval = setpgid (getpid (), getpid ());
+#else
+#if defined (TIOCGPGRP)
+#if defined(USG) && !defined(SETPGRP_ARGS)
+      retval = setpgrp ();
+#else
+      retval = setpgrp (getpid (), getpid ());
+#endif /* USG */
+#endif /* TIOCGPGRP.  */
+#endif /* NEED_POSIX_SETPGID */
+    }
+  return retval;
+}
+
+void
+_initialize_inflow ()
+{
+  add_info ("terminal", term_info,
+	   "Print inferior's saved terminal status.");
+
+  add_com ("kill", class_run, kill_command,
+	   "Kill execution of program being debugged.");
+
+  inferior_pid = 0;
+
+  terminal_is_ours = 1;
+
+  /* OK, figure out whether we have job control.  If neither termios nor
+     sgtty (i.e. termio or go32), leave job_control 0.  */
+
+#if defined (HAVE_TERMIOS)
+  /* Do all systems with termios have the POSIX way of identifying job
+     control?  I hope so.  */
+#ifdef _POSIX_JOB_CONTROL
+  job_control = 1;
+#else
+#ifdef _SC_JOB_CONTROL
+  job_control = sysconf (_SC_JOB_CONTROL);
+#else
+  job_control = 0;	/* have to assume the worst */
+#endif	/* _SC_JOB_CONTROL */
+#endif	/* _POSIX_JOB_CONTROL */
+#endif	/* HAVE_TERMIOS */
+
+#ifdef HAVE_SGTTY
+#ifdef TIOCGPGRP
+  job_control = 1;
+#else
+  job_control = 0;
+#endif /* TIOCGPGRP */
+#endif /* sgtty */
+}
diff --git a/gdb/infptrace.c b/gdb/infptrace.c
new file mode 100644
index 0000000..1db7223
--- /dev/null
+++ b/gdb/infptrace.c
@@ -0,0 +1,638 @@
+/* Low level Unix child interface to ptrace, for GDB when running under Unix.
+   Copyright 1988, 89, 90, 91, 92, 93, 94, 95, 96, 1998 
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdb_string.h"
+#include "wait.h"
+#include "command.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+
+#ifdef HAVE_PTRACE_H
+# include <ptrace.h>
+#else
+# ifdef HAVE_SYS_PTRACE_H
+#  include <sys/ptrace.h>
+# endif
+#endif
+
+#if !defined (PT_READ_I)
+#define PT_READ_I	1	/* Read word from text space */
+#endif
+#if !defined (PT_READ_D)
+#define	PT_READ_D	2	/* Read word from data space */
+#endif
+#if !defined (PT_READ_U)
+#define PT_READ_U	3	/* Read word from kernel user struct */
+#endif
+#if !defined (PT_WRITE_I)
+#define PT_WRITE_I	4	/* Write word to text space */
+#endif
+#if !defined (PT_WRITE_D)
+#define PT_WRITE_D	5	/* Write word to data space */
+#endif
+#if !defined (PT_WRITE_U)
+#define PT_WRITE_U	6	/* Write word to kernel user struct */
+#endif
+#if !defined (PT_CONTINUE)
+#define PT_CONTINUE	7	/* Continue after signal */
+#endif
+#if !defined (PT_STEP)
+#define PT_STEP		9	/* Set flag for single stepping */
+#endif
+#if !defined (PT_KILL)
+#define PT_KILL		8	/* Send child a SIGKILL signal */
+#endif
+
+#ifndef PT_ATTACH
+#define PT_ATTACH PTRACE_ATTACH
+#endif
+#ifndef PT_DETACH
+#define PT_DETACH PTRACE_DETACH
+#endif
+
+#include "gdbcore.h"
+#ifndef	NO_SYS_FILE
+#include <sys/file.h>
+#endif
+#if 0
+/* Don't think this is used anymore.  On the sequent (not sure whether it's
+   dynix or ptx or both), it is included unconditionally by sys/user.h and
+   not protected against multiple inclusion.  */
+#include "gdb_stat.h"
+#endif
+
+#if !defined (FETCH_INFERIOR_REGISTERS)
+#include <sys/user.h>		/* Probably need to poke the user structure */
+#if defined (KERNEL_U_ADDR_BSD)
+#include <a.out.h>		/* For struct nlist */
+#endif /* KERNEL_U_ADDR_BSD.  */
+#endif /* !FETCH_INFERIOR_REGISTERS */
+
+#if !defined (CHILD_XFER_MEMORY)
+static void udot_info PARAMS ((char *, int));
+#endif
+
+#if !defined (FETCH_INFERIOR_REGISTERS)
+static void fetch_register PARAMS ((int));
+static void store_register PARAMS ((int));
+#endif
+
+void _initialize_kernel_u_addr PARAMS ((void));
+void _initialize_infptrace PARAMS ((void));
+
+
+/* This function simply calls ptrace with the given arguments.  
+   It exists so that all calls to ptrace are isolated in this 
+   machine-dependent file. */
+int
+call_ptrace (request, pid, addr, data)
+     int request, pid;
+     PTRACE_ARG3_TYPE addr;
+     int data;
+{
+  int pt_status = 0;
+
+#if 0
+  int saved_errno;
+
+  printf ("call_ptrace(request=%d, pid=%d, addr=0x%x, data=0x%x)",
+	  request, pid, addr, data);
+#endif
+#if defined(PT_SETTRC)
+  /* If the parent can be told to attach to us, try to do it.  */
+  if (request == PT_SETTRC) {
+    errno = 0;
+    pt_status = ptrace (PT_SETTRC, pid, addr, data
+#if defined (FIVE_ARG_PTRACE)
+                       /* Deal with HPUX 8.0 braindamage.  We never use the
+                          calls which require the fifth argument.  */
+                       , 0
+#endif
+                       );
+
+     if (errno) perror_with_name ("ptrace");
+#if 0
+     printf (" = %d\n", pt_status);
+#endif
+     if (pt_status < 0)
+         return pt_status;
+     else
+         return parent_attach_all (pid, addr, data);
+  }
+#endif
+
+#if defined(PT_CONTIN1)
+  /* On HPUX, PT_CONTIN1 is a form of continue that preserves pending
+     signals.  If it's available, use it.  */
+  if (request == PT_CONTINUE)
+    request = PT_CONTIN1;
+#endif
+
+#if defined(PT_SINGLE1)
+  /* On HPUX, PT_SINGLE1 is a form of step that preserves pending
+     signals.  If it's available, use it.  */
+  if (request == PT_STEP)
+    request = PT_SINGLE1;
+#endif
+
+#if 0
+  saved_errno = errno;
+  errno = 0;
+#endif
+  pt_status = ptrace (request, pid, addr, data
+#if defined (FIVE_ARG_PTRACE)
+		 /* Deal with HPUX 8.0 braindamage.  We never use the
+		    calls which require the fifth argument.  */
+		 , 0
+#endif
+		 );
+#if 0
+  if (errno)
+    printf (" [errno = %d]", errno);
+
+  errno = saved_errno;
+  printf (" = 0x%x\n", pt_status);
+#endif
+  return pt_status;
+}
+
+
+#if defined (DEBUG_PTRACE) || defined (FIVE_ARG_PTRACE)
+/* For the rest of the file, use an extra level of indirection */
+/* This lets us breakpoint usefully on call_ptrace. */
+#define ptrace call_ptrace
+#endif
+
+/* Wait for a process to finish, possibly running a target-specific
+   hook before returning.  */
+
+int
+ptrace_wait (pid, status)
+    int pid;
+    int *status;
+{
+  int wstate;
+
+  wstate = wait (status);
+  target_post_wait (wstate, *status);
+  return wstate;
+}
+
+void
+kill_inferior ()
+{
+  int status;
+
+  if (inferior_pid == 0)
+    return;
+
+  /* This once used to call "kill" to kill the inferior just in case
+     the inferior was still running.  As others have noted in the past
+     (kingdon) there shouldn't be any way to get here if the inferior
+     is still running -- else there's a major problem elsewere in gdb
+     and it needs to be fixed.
+
+     The kill call causes problems under hpux10, so it's been removed;
+     if this causes problems we'll deal with them as they arise.  */
+  ptrace (PT_KILL, inferior_pid, (PTRACE_ARG3_TYPE) 0, 0);
+  ptrace_wait (0, &status);
+  target_mourn_inferior ();
+}
+
+#ifndef CHILD_RESUME
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+child_resume (pid, step, signal)
+     int pid;
+     int step;
+     enum target_signal signal;
+{
+  errno = 0;
+
+  if (pid == -1)
+    /* Resume all threads.  */
+    /* I think this only gets used in the non-threaded case, where "resume
+       all threads" and "resume inferior_pid" are the same.  */
+    pid = inferior_pid;
+
+  /* An address of (PTRACE_ARG3_TYPE)1 tells ptrace to continue from where
+     it was.  (If GDB wanted it to start some other way, we have already
+     written a new PC value to the child.)
+
+     If this system does not support PT_STEP, a higher level function will
+     have called single_step() to transmute the step request into a
+     continue request (by setting breakpoints on all possible successor
+     instructions), so we don't have to worry about that here.  */
+
+  if (step)
+    {
+      if (SOFTWARE_SINGLE_STEP_P)
+	abort();  /* Make sure this doesn't happen. */
+      else
+	ptrace (PT_STEP,     pid, (PTRACE_ARG3_TYPE) 1,
+		target_signal_to_host (signal));
+    }
+  else
+    ptrace (PT_CONTINUE, pid, (PTRACE_ARG3_TYPE) 1,
+	    target_signal_to_host (signal));
+
+  if (errno)
+    perror_with_name ("ptrace");
+}
+#endif /* CHILD_RESUME */
+
+
+#ifdef ATTACH_DETACH
+/* Start debugging the process whose number is PID.  */
+int
+attach (pid)
+     int pid;
+{
+  errno = 0;
+  ptrace (PT_ATTACH, pid, (PTRACE_ARG3_TYPE) 0, 0);
+  if (errno)
+    perror_with_name ("ptrace");
+  attach_flag = 1;
+  return pid;
+}
+
+/* Stop debugging the process whose number is PID
+   and continue it with signal number SIGNAL.
+   SIGNAL = 0 means just continue it.  */
+
+void
+detach (signal)
+     int signal;
+{
+  errno = 0;
+  ptrace (PT_DETACH, inferior_pid, (PTRACE_ARG3_TYPE) 1, signal);
+  if (errno)
+    perror_with_name ("ptrace");
+  attach_flag = 0;
+}
+#endif /* ATTACH_DETACH */
+
+/* Default the type of the ptrace transfer to int.  */
+#ifndef PTRACE_XFER_TYPE
+#define PTRACE_XFER_TYPE int
+#endif
+
+/* KERNEL_U_ADDR is the amount to subtract from u.u_ar0
+   to get the offset in the core file of the register values.  */
+#if defined (KERNEL_U_ADDR_BSD) && !defined (FETCH_INFERIOR_REGISTERS)
+/* Get kernel_u_addr using BSD-style nlist().  */
+CORE_ADDR kernel_u_addr;
+#endif /* KERNEL_U_ADDR_BSD.  */
+
+void
+_initialize_kernel_u_addr ()
+{
+#if defined (KERNEL_U_ADDR_BSD) && !defined (FETCH_INFERIOR_REGISTERS)
+  struct nlist names[2];
+
+  names[0].n_un.n_name = "_u";
+  names[1].n_un.n_name = NULL;
+  if (nlist ("/vmunix", names) == 0)
+    kernel_u_addr = names[0].n_value;
+  else
+    fatal ("Unable to get kernel u area address.");
+#endif /* KERNEL_U_ADDR_BSD.  */
+}
+
+#if !defined (FETCH_INFERIOR_REGISTERS)
+
+#if !defined (offsetof)
+#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+/* U_REGS_OFFSET is the offset of the registers within the u area.  */
+#if !defined (U_REGS_OFFSET)
+#define U_REGS_OFFSET \
+  ptrace (PT_READ_U, inferior_pid, \
+	  (PTRACE_ARG3_TYPE) (offsetof (struct user, u_ar0)), 0) \
+    - KERNEL_U_ADDR
+#endif
+
+/* Registers we shouldn't try to fetch.  */
+#if !defined (CANNOT_FETCH_REGISTER)
+#define CANNOT_FETCH_REGISTER(regno) 0
+#endif
+
+/* Fetch one register.  */
+
+static void
+fetch_register (regno)
+     int regno;
+{
+  /* This isn't really an address.  But ptrace thinks of it as one.  */
+  CORE_ADDR regaddr;
+  char mess[128];				/* For messages */
+  register int i;
+  unsigned int offset;  /* Offset of registers within the u area.  */
+  char buf[MAX_REGISTER_RAW_SIZE];
+
+  if (CANNOT_FETCH_REGISTER (regno))
+    {
+      memset (buf, '\0', REGISTER_RAW_SIZE (regno));	/* Supply zeroes */
+      supply_register (regno, buf);
+      return;
+    }
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (PTRACE_XFER_TYPE))
+    {
+      errno = 0;
+      *(PTRACE_XFER_TYPE *) &buf[i] = ptrace (PT_READ_U, inferior_pid,
+					      (PTRACE_ARG3_TYPE) regaddr, 0);
+      regaddr += sizeof (PTRACE_XFER_TYPE);
+      if (errno != 0)
+	{
+	  sprintf (mess, "reading register %s (#%d)", REGISTER_NAME (regno), regno);
+	  perror_with_name (mess);
+	}
+    }
+  supply_register (regno, buf);
+}
+
+
+/* Fetch register values from the inferior.
+   If REGNO is negative, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time). */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  if (regno >= 0)
+    {
+      fetch_register (regno);
+    }
+  else
+    {
+      for (regno = 0; regno < ARCH_NUM_REGS; regno++)
+	{
+	  fetch_register (regno);
+	}
+    }
+}
+
+/* Registers we shouldn't try to store.  */
+#if !defined (CANNOT_STORE_REGISTER)
+#define CANNOT_STORE_REGISTER(regno) 0
+#endif
+
+/* Store one register. */
+
+static void
+store_register (regno)
+     int regno;
+{
+  /* This isn't really an address.  But ptrace thinks of it as one.  */
+  CORE_ADDR regaddr;
+  char mess[128];				/* For messages */
+  register int i;
+  unsigned int offset;  /* Offset of registers within the u area.  */
+
+  if (CANNOT_STORE_REGISTER (regno))
+    {
+      return;
+    }
+
+  offset = U_REGS_OFFSET;
+
+  regaddr = register_addr (regno, offset);
+  for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof(PTRACE_XFER_TYPE))
+    {
+      errno = 0;
+      ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+	      *(PTRACE_XFER_TYPE *) &registers[REGISTER_BYTE (regno) + i]);
+      regaddr += sizeof (PTRACE_XFER_TYPE);
+      if (errno != 0)
+	{
+	  sprintf (mess, "writing register %s (#%d)", REGISTER_NAME (regno), regno);
+	  perror_with_name (mess);
+	}
+    }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is negative, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  if (regno >= 0)
+    {
+      store_register (regno);
+    }
+  else
+    {
+      for (regno = 0; regno < ARCH_NUM_REGS; regno++)
+	{
+	  store_register (regno);
+	}
+    }
+}
+#endif /* !defined (FETCH_INFERIOR_REGISTERS).  */
+
+
+#if !defined (CHILD_XFER_MEMORY)
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.   Copy to inferior if
+   WRITE is nonzero.
+  
+   Returns the length copied, which is either the LEN argument or zero.
+   This xfer function does not do partial moves, since child_ops
+   doesn't allow memory operations to cross below us in the target stack
+   anyway.  */
+
+int
+child_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & - sizeof (PTRACE_XFER_TYPE);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+    = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
+      / sizeof (PTRACE_XFER_TYPE);
+  /* Allocate buffer of that many longwords.  */
+  register PTRACE_XFER_TYPE *buffer
+    = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int) sizeof (PTRACE_XFER_TYPE)) {
+	/* Need part of initial word -- fetch it.  */
+        buffer[0] = ptrace (PT_READ_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+			    0);
+      }
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1]
+	    = ptrace (PT_READ_I, inferior_pid,
+		      ((PTRACE_ARG3_TYPE)
+		       (addr + (count - 1) * sizeof (PTRACE_XFER_TYPE))),
+		      0);
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+	      myaddr,
+	      len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  ptrace (PT_WRITE_D, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+		  buffer[i]);
+	  if (errno)
+            {
+	      /* Using the appropriate one (I or D) is necessary for
+		 Gould NP1, at least.  */
+	      errno = 0;
+	      ptrace (PT_WRITE_I, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+		      buffer[i]);
+	    }
+	  if (errno)
+	    return 0;
+	}
+#ifdef CLEAR_INSN_CACHE
+      CLEAR_INSN_CACHE();
+#endif
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  buffer[i] = ptrace (PT_READ_I, inferior_pid,
+			      (PTRACE_ARG3_TYPE) addr, 0);
+	  if (errno)
+	    return 0;
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr,
+	      (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+	      len);
+    }
+  return len;
+}
+
+
+static void
+udot_info (dummy1, dummy2)
+     char *dummy1;
+     int dummy2;
+{
+#if defined (KERNEL_U_SIZE)
+  int udot_off;		/* Offset into user struct */
+  int udot_val;		/* Value from user struct at udot_off */
+  char mess[128];	/* For messages */
+#endif
+
+   if (!target_has_execution)
+     {
+       error ("The program is not being run.");
+     }
+
+#if !defined (KERNEL_U_SIZE)
+
+  /* Adding support for this command is easy.  Typically you just add a
+     routine, called "kernel_u_size" that returns the size of the user
+     struct, to the appropriate *-nat.c file and then add to the native
+     config file "#define KERNEL_U_SIZE kernel_u_size()" */
+  error ("Don't know how large ``struct user'' is in this version of gdb.");
+
+#else
+
+  for (udot_off = 0; udot_off < KERNEL_U_SIZE; udot_off += sizeof (udot_val))
+    {
+      if ((udot_off % 24) == 0)
+	{
+	  if (udot_off > 0)
+	    {
+	      printf_filtered ("\n");
+	    }
+	  printf_filtered ("%04x:", udot_off);
+	}
+      udot_val = ptrace (PT_READ_U, inferior_pid, (PTRACE_ARG3_TYPE) udot_off, 0);
+      if (errno != 0)
+	{
+	  sprintf (mess, "\nreading user struct at offset 0x%x", udot_off);
+	  perror_with_name (mess);
+	}
+      /* Avoid using nonportable (?) "*" in print specs */
+      printf_filtered (sizeof (int) == 4 ? " 0x%08x" : " 0x%16x", udot_val);
+    }
+  printf_filtered ("\n");
+
+#endif
+}
+#endif /* !defined (CHILD_XFER_MEMORY).  */
+
+
+void
+_initialize_infptrace ()
+{
+#if !defined (CHILD_XFER_MEMORY)
+  add_info ("udot", udot_info,
+	    "Print contents of kernel ``struct user'' for current child.");
+#endif
+}
diff --git a/gdb/infrun.c b/gdb/infrun.c
new file mode 100644
index 0000000..5fd8fc1
--- /dev/null
+++ b/gdb/infrun.c
@@ -0,0 +1,3775 @@
+/* Target-struct-independent code to start (run) and stop an inferior process.
+   Copyright 1986, 87, 88, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "inferior.h"
+#include "breakpoint.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "gdbthread.h"
+#include "annotate.h"
+#include "symfile.h"		/* for overlay functions */
+
+#include <signal.h>
+
+/* Prototypes for local functions */
+
+static void signals_info PARAMS ((char *, int));
+
+static void handle_command PARAMS ((char *, int));
+
+static void sig_print_info PARAMS ((enum target_signal));
+
+static void sig_print_header PARAMS ((void));
+
+static void resume_cleanups PARAMS ((int));
+
+static int hook_stop_stub PARAMS ((PTR));
+
+static void delete_breakpoint_current_contents PARAMS ((PTR));
+
+int inferior_ignoring_startup_exec_events = 0;
+int inferior_ignoring_leading_exec_events = 0;
+
+#ifdef HPUXHPPA
+/* wait_for_inferior and normal_stop use this to notify the user
+   when the inferior stopped in a different thread than it had been
+   running in. */
+static int switched_from_inferior_pid;
+#endif
+
+/* resume and wait_for_inferior use this to ensure that when
+   stepping over a hit breakpoint in a threaded application
+   only the thread that hit the breakpoint is stepped and the
+   other threads don't continue.  This prevents having another
+   thread run past the breakpoint while it is temporarily
+   removed.
+
+   This is not thread-specific, so it isn't saved as part of
+   the infrun state.
+
+   Versions of gdb which don't use the "step == this thread steps
+   and others continue" model but instead use the "step == this
+   thread steps and others wait" shouldn't do this. */
+static int thread_step_needed = 0;
+
+void _initialize_infrun PARAMS ((void));
+
+/* GET_LONGJMP_TARGET returns the PC at which longjmp() will resume the
+   program.  It needs to examine the jmp_buf argument and extract the PC
+   from it.  The return value is non-zero on success, zero otherwise. */
+
+#ifndef GET_LONGJMP_TARGET
+#define GET_LONGJMP_TARGET(PC_ADDR) 0
+#endif
+
+
+/* Some machines have trampoline code that sits between function callers
+   and the actual functions themselves.  If this machine doesn't have
+   such things, disable their processing.  */
+
+#ifndef SKIP_TRAMPOLINE_CODE
+#define	SKIP_TRAMPOLINE_CODE(pc)	0
+#endif
+
+/* Dynamic function trampolines are similar to solib trampolines in that they
+   are between the caller and the callee.  The difference is that when you
+   enter a dynamic trampoline, you can't determine the callee's address.  Some
+   (usually complex) code needs to run in the dynamic trampoline to figure out
+   the callee's address.  This macro is usually called twice.  First, when we
+   enter the trampoline (looks like a normal function call at that point).  It
+   should return the PC of a point within the trampoline where the callee's
+   address is known.  Second, when we hit the breakpoint, this routine returns
+   the callee's address.  At that point, things proceed as per a step resume
+   breakpoint.  */
+
+#ifndef DYNAMIC_TRAMPOLINE_NEXTPC
+#define DYNAMIC_TRAMPOLINE_NEXTPC(pc) 0
+#endif
+
+/* On SVR4 based systems, determining the callee's address is exceedingly
+   difficult and depends on the implementation of the run time loader.
+   If we are stepping at the source level, we single step until we exit
+   the run time loader code and reach the callee's address.  */
+
+#ifndef IN_SOLIB_DYNSYM_RESOLVE_CODE
+#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) 0
+#endif
+
+/* For SVR4 shared libraries, each call goes through a small piece of
+   trampoline code in the ".plt" section.  IN_SOLIB_CALL_TRAMPOLINE evaluates
+   to nonzero if we are current stopped in one of these. */
+
+#ifndef IN_SOLIB_CALL_TRAMPOLINE
+#define IN_SOLIB_CALL_TRAMPOLINE(pc,name)	0
+#endif
+
+/* In some shared library schemes, the return path from a shared library
+   call may need to go through a trampoline too.  */
+
+#ifndef IN_SOLIB_RETURN_TRAMPOLINE
+#define IN_SOLIB_RETURN_TRAMPOLINE(pc,name)	0
+#endif
+
+/* This function returns TRUE if pc is the address of an instruction
+   that lies within the dynamic linker (such as the event hook, or the
+   dld itself).
+
+   This function must be used only when a dynamic linker event has
+   been caught, and the inferior is being stepped out of the hook, or
+   undefined results are guaranteed.  */
+
+#ifndef SOLIB_IN_DYNAMIC_LINKER
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) 0
+#endif
+
+/* On MIPS16, a function that returns a floating point value may call
+   a library helper function to copy the return value to a floating point
+   register.  The IGNORE_HELPER_CALL macro returns non-zero if we
+   should ignore (i.e. step over) this function call.  */
+#ifndef IGNORE_HELPER_CALL
+#define IGNORE_HELPER_CALL(pc)	0
+#endif
+
+/* On some systems, the PC may be left pointing at an instruction that  won't
+   actually be executed.  This is usually indicated by a bit in the PSW.  If
+   we find ourselves in such a state, then we step the target beyond the
+   nullified instruction before returning control to the user so as to avoid
+   confusion. */
+
+#ifndef INSTRUCTION_NULLIFIED
+#define INSTRUCTION_NULLIFIED 0
+#endif
+
+/* Tables of how to react to signals; the user sets them.  */
+
+static unsigned char *signal_stop;
+static unsigned char *signal_print;
+static unsigned char *signal_program;
+
+#define SET_SIGS(nsigs,sigs,flags) \
+  do { \
+    int signum = (nsigs); \
+    while (signum-- > 0) \
+      if ((sigs)[signum]) \
+	(flags)[signum] = 1; \
+  } while (0)
+
+#define UNSET_SIGS(nsigs,sigs,flags) \
+  do { \
+    int signum = (nsigs); \
+    while (signum-- > 0) \
+      if ((sigs)[signum]) \
+	(flags)[signum] = 0; \
+  } while (0)
+
+
+/* Command list pointer for the "stop" placeholder.  */
+
+static struct cmd_list_element *stop_command;
+
+/* Nonzero if breakpoints are now inserted in the inferior.  */
+
+static int breakpoints_inserted;
+
+/* Function inferior was in as of last step command.  */
+
+static struct symbol *step_start_function;
+
+/* Nonzero if we are expecting a trace trap and should proceed from it.  */
+
+static int trap_expected;
+
+#ifdef SOLIB_ADD
+/* Nonzero if we want to give control to the user when we're notified
+   of shared library events by the dynamic linker.  */
+static int stop_on_solib_events;
+#endif
+
+#ifdef HP_OS_BUG
+/* Nonzero if the next time we try to continue the inferior, it will
+   step one instruction and generate a spurious trace trap.
+   This is used to compensate for a bug in HP-UX.  */
+
+static int trap_expected_after_continue;
+#endif
+
+/* Nonzero means expecting a trace trap
+   and should stop the inferior and return silently when it happens.  */
+
+int stop_after_trap;
+
+/* Nonzero means expecting a trap and caller will handle it themselves.
+   It is used after attach, due to attaching to a process;
+   when running in the shell before the child program has been exec'd;
+   and when running some kinds of remote stuff (FIXME?).  */
+
+int stop_soon_quietly;
+
+/* Nonzero if proceed is being used for a "finish" command or a similar
+   situation when stop_registers should be saved.  */
+
+int proceed_to_finish;
+
+/* Save register contents here when about to pop a stack dummy frame,
+   if-and-only-if proceed_to_finish is set.
+   Thus this contains the return value from the called function (assuming
+   values are returned in a register).  */
+
+char stop_registers[REGISTER_BYTES];
+
+/* Nonzero if program stopped due to error trying to insert breakpoints.  */
+
+static int breakpoints_failed;
+
+/* Nonzero after stop if current stack frame should be printed.  */
+
+static int stop_print_frame;
+
+static struct breakpoint *step_resume_breakpoint = NULL;
+static struct breakpoint *through_sigtramp_breakpoint = NULL;
+
+/* On some platforms (e.g., HP-UX), hardware watchpoints have bad
+   interactions with an inferior that is running a kernel function
+   (aka, a system call or "syscall").  wait_for_inferior therefore
+   may have a need to know when the inferior is in a syscall.  This
+   is a count of the number of inferior threads which are known to
+   currently be running in a syscall. */
+static int number_of_threads_in_syscalls;
+
+/* This is used to remember when a fork, vfork or exec event
+   was caught by a catchpoint, and thus the event is to be
+   followed at the next resume of the inferior, and not
+   immediately. */
+static struct
+  {
+    enum target_waitkind kind;
+    struct
+      {
+	int parent_pid;
+	int saw_parent_fork;
+	int child_pid;
+	int saw_child_fork;
+	int saw_child_exec;
+      }
+    fork_event;
+    char *execd_pathname;
+  }
+pending_follow;
+
+/* Some platforms don't allow us to do anything meaningful with a
+   vforked child until it has exec'd.  Vforked processes on such
+   platforms can only be followed after they've exec'd.
+
+   When this is set to 0, a vfork can be immediately followed,
+   and an exec can be followed merely as an exec.  When this is
+   set to 1, a vfork event has been seen, but cannot be followed
+   until the exec is seen.
+
+   (In the latter case, inferior_pid is still the parent of the
+   vfork, and pending_follow.fork_event.child_pid is the child.  The
+   appropriate process is followed, according to the setting of
+   follow-fork-mode.) */
+static int follow_vfork_when_exec;
+
+static char *follow_fork_mode_kind_names[] =
+{
+/* ??rehrauer:  The "both" option is broken, by what may be a 10.20
+   kernel problem.  It's also not terribly useful without a GUI to
+   help the user drive two debuggers.  So for now, I'm disabling
+   the "both" option.
+  "parent", "child", "both", "ask" };
+  */
+  "parent", "child", "ask"};
+
+static char *follow_fork_mode_string = NULL;
+
+
+#if defined(HPUXHPPA)
+static void
+follow_inferior_fork (parent_pid, child_pid, has_forked, has_vforked)
+     int parent_pid;
+     int child_pid;
+     int has_forked;
+     int has_vforked;
+{
+  int followed_parent = 0;
+  int followed_child = 0;
+  int ima_clone = 0;
+
+  /* Which process did the user want us to follow? */
+  char *follow_mode =
+  savestring (follow_fork_mode_string, strlen (follow_fork_mode_string));
+
+  /* Or, did the user not know, and want us to ask? */
+  if (STREQ (follow_fork_mode_string, "ask"))
+    {
+      char requested_mode[100];
+
+      free (follow_mode);
+      error ("\"ask\" mode NYI");
+      follow_mode = savestring (requested_mode, strlen (requested_mode));
+    }
+
+  /* If we're to be following the parent, then detach from child_pid.
+     We're already following the parent, so need do nothing explicit
+     for it. */
+  if (STREQ (follow_mode, "parent"))
+    {
+      followed_parent = 1;
+
+      /* We're already attached to the parent, by default. */
+
+      /* Before detaching from the child, remove all breakpoints from
+         it.  (This won't actually modify the breakpoint list, but will
+         physically remove the breakpoints from the child.) */
+      if (!has_vforked || !follow_vfork_when_exec)
+	{
+	  detach_breakpoints (child_pid);
+	  SOLIB_REMOVE_INFERIOR_HOOK (child_pid);
+	}
+
+      /* Detach from the child. */
+      dont_repeat ();
+
+      target_require_detach (child_pid, "", 1);
+    }
+
+  /* If we're to be following the child, then attach to it, detach
+     from inferior_pid, and set inferior_pid to child_pid. */
+  else if (STREQ (follow_mode, "child"))
+    {
+      char child_pid_spelling[100];	/* Arbitrary length. */
+
+      followed_child = 1;
+
+      /* Before detaching from the parent, detach all breakpoints from
+         the child.  But only if we're forking, or if we follow vforks
+         as soon as they happen.  (If we're following vforks only when
+         the child has exec'd, then it's very wrong to try to write
+         back the "shadow contents" of inserted breakpoints now -- they
+         belong to the child's pre-exec'd a.out.) */
+      if (!has_vforked || !follow_vfork_when_exec)
+	{
+	  detach_breakpoints (child_pid);
+	}
+
+      /* Before detaching from the parent, remove all breakpoints from it. */
+      remove_breakpoints ();
+
+      /* Also reset the solib inferior hook from the parent. */
+      SOLIB_REMOVE_INFERIOR_HOOK (inferior_pid);
+
+      /* Detach from the parent. */
+      dont_repeat ();
+      target_detach (NULL, 1);
+
+      /* Attach to the child. */
+      inferior_pid = child_pid;
+      sprintf (child_pid_spelling, "%d", child_pid);
+      dont_repeat ();
+
+      target_require_attach (child_pid_spelling, 1);
+
+      /* Was there a step_resume breakpoint?  (There was if the user
+         did a "next" at the fork() call.)  If so, explicitly reset its
+         thread number.
+
+         step_resumes are a form of bp that are made to be per-thread.
+         Since we created the step_resume bp when the parent process
+         was being debugged, and now are switching to the child process,
+         from the breakpoint package's viewpoint, that's a switch of
+         "threads".  We must update the bp's notion of which thread
+         it is for, or it'll be ignored when it triggers... */
+      if (step_resume_breakpoint &&
+	  (!has_vforked || !follow_vfork_when_exec))
+	breakpoint_re_set_thread (step_resume_breakpoint);
+
+      /* Reinsert all breakpoints in the child.  (The user may've set
+         breakpoints after catching the fork, in which case those
+         actually didn't get set in the child, but only in the parent.) */
+      if (!has_vforked || !follow_vfork_when_exec)
+	{
+	  breakpoint_re_set ();
+	  insert_breakpoints ();
+	}
+    }
+
+  /* If we're to be following both parent and child, then fork ourselves,
+     and attach the debugger clone to the child. */
+  else if (STREQ (follow_mode, "both"))
+    {
+      char pid_suffix[100];	/* Arbitrary length. */
+
+      /* Clone ourselves to follow the child.  This is the end of our
+       involvement with child_pid; our clone will take it from here... */
+      dont_repeat ();
+      target_clone_and_follow_inferior (child_pid, &followed_child);
+      followed_parent = !followed_child;
+
+      /* We continue to follow the parent.  To help distinguish the two
+         debuggers, though, both we and our clone will reset our prompts. */
+      sprintf (pid_suffix, "[%d] ", inferior_pid);
+      set_prompt (strcat (get_prompt (), pid_suffix));
+    }
+
+  /* The parent and child of a vfork share the same address space.
+     Also, on some targets the order in which vfork and exec events
+     are received for parent in child requires some delicate handling
+     of the events.
+
+     For instance, on ptrace-based HPUX we receive the child's vfork
+     event first, at which time the parent has been suspended by the
+     OS and is essentially untouchable until the child's exit or second
+     exec event arrives.  At that time, the parent's vfork event is
+     delivered to us, and that's when we see and decide how to follow
+     the vfork.  But to get to that point, we must continue the child
+     until it execs or exits.  To do that smoothly, all breakpoints
+     must be removed from the child, in case there are any set between
+     the vfork() and exec() calls.  But removing them from the child
+     also removes them from the parent, due to the shared-address-space
+     nature of a vfork'd parent and child.  On HPUX, therefore, we must
+     take care to restore the bp's to the parent before we continue it.
+     Else, it's likely that we may not stop in the expected place.  (The
+     worst scenario is when the user tries to step over a vfork() call;
+     the step-resume bp must be restored for the step to properly stop
+     in the parent after the call completes!)
+
+     Sequence of events, as reported to gdb from HPUX:
+
+           Parent        Child           Action for gdb to take
+         -------------------------------------------------------
+        1                VFORK               Continue child
+        2                EXEC
+        3                EXEC or EXIT
+        4  VFORK */
+  if (has_vforked)
+    {
+      target_post_follow_vfork (parent_pid,
+				followed_parent,
+				child_pid,
+				followed_child);
+    }
+
+  pending_follow.fork_event.saw_parent_fork = 0;
+  pending_follow.fork_event.saw_child_fork = 0;
+
+  free (follow_mode);
+}
+
+static void
+follow_fork (parent_pid, child_pid)
+     int parent_pid;
+     int child_pid;
+{
+  follow_inferior_fork (parent_pid, child_pid, 1, 0);
+}
+
+
+/* Forward declaration. */
+static void follow_exec PARAMS ((int, char *));
+
+static void
+follow_vfork (parent_pid, child_pid)
+     int parent_pid;
+     int child_pid;
+{
+  follow_inferior_fork (parent_pid, child_pid, 0, 1);
+
+  /* Did we follow the child?  Had it exec'd before we saw the parent vfork? */
+  if (pending_follow.fork_event.saw_child_exec && (inferior_pid == child_pid))
+    {
+      pending_follow.fork_event.saw_child_exec = 0;
+      pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+      follow_exec (inferior_pid, pending_follow.execd_pathname);
+      free (pending_follow.execd_pathname);
+    }
+}
+#endif /* HPUXHPPA */
+
+static void
+follow_exec (pid, execd_pathname)
+     int pid;
+     char *execd_pathname;
+{
+#ifdef HPUXHPPA
+  int saved_pid = pid;
+  extern struct target_ops child_ops;
+
+  /* Did this exec() follow a vfork()?  If so, we must follow the
+     vfork now too.  Do it before following the exec. */
+  if (follow_vfork_when_exec &&
+      (pending_follow.kind == TARGET_WAITKIND_VFORKED))
+    {
+      pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+      follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+      follow_vfork_when_exec = 0;
+      saved_pid = inferior_pid;
+
+      /* Did we follow the parent?  If so, we're done.  If we followed
+         the child then we must also follow its exec(). */
+      if (inferior_pid == pending_follow.fork_event.parent_pid)
+	return;
+    }
+
+  /* This is an exec event that we actually wish to pay attention to.
+     Refresh our symbol table to the newly exec'd program, remove any
+     momentary bp's, etc.
+
+     If there are breakpoints, they aren't really inserted now,
+     since the exec() transformed our inferior into a fresh set
+     of instructions.
+
+     We want to preserve symbolic breakpoints on the list, since
+     we have hopes that they can be reset after the new a.out's
+     symbol table is read.
+
+     However, any "raw" breakpoints must be removed from the list
+     (e.g., the solib bp's), since their address is probably invalid
+     now.
+
+     And, we DON'T want to call delete_breakpoints() here, since
+     that may write the bp's "shadow contents" (the instruction
+     value that was overwritten witha TRAP instruction).  Since
+     we now have a new a.out, those shadow contents aren't valid. */
+  update_breakpoints_after_exec ();
+
+  /* If there was one, it's gone now.  We cannot truly step-to-next
+     statement through an exec(). */
+  step_resume_breakpoint = NULL;
+  step_range_start = 0;
+  step_range_end = 0;
+
+  /* If there was one, it's gone now. */
+  through_sigtramp_breakpoint = NULL;
+
+  /* What is this a.out's name? */
+  printf_unfiltered ("Executing new program: %s\n", execd_pathname);
+
+  /* We've followed the inferior through an exec.  Therefore, the
+     inferior has essentially been killed & reborn. */
+  gdb_flush (gdb_stdout);
+  target_mourn_inferior ();
+  inferior_pid = saved_pid;	/* Because mourn_inferior resets inferior_pid. */
+  push_target (&child_ops);
+
+  /* That a.out is now the one to use. */
+  exec_file_attach (execd_pathname, 0);
+
+  /* And also is where symbols can be found. */
+  symbol_file_command (execd_pathname, 0);
+
+  /* Reset the shared library package.  This ensures that we get
+     a shlib event when the child reaches "_start", at which point
+     the dld will have had a chance to initialize the child. */
+  SOLIB_RESTART ();
+  SOLIB_CREATE_INFERIOR_HOOK (inferior_pid);
+
+  /* Reinsert all breakpoints.  (Those which were symbolic have
+     been reset to the proper address in the new a.out, thanks
+     to symbol_file_command...) */
+  insert_breakpoints ();
+
+  /* The next resume of this inferior should bring it to the shlib
+     startup breakpoints.  (If the user had also set bp's on
+     "main" from the old (parent) process, then they'll auto-
+     matically get reset there in the new process.) */
+#endif
+}
+
+/* Non-zero if we just simulating a single-step.  This is needed
+   because we cannot remove the breakpoints in the inferior process
+   until after the `wait' in `wait_for_inferior'.  */
+static int singlestep_breakpoints_inserted_p = 0;
+
+
+/* Things to clean up if we QUIT out of resume ().  */
+/* ARGSUSED */
+static void
+resume_cleanups (arg)
+     int arg;
+{
+  normal_stop ();
+}
+
+static char schedlock_off[] = "off";
+static char schedlock_on[] = "on";
+static char schedlock_step[] = "step";
+static char *scheduler_mode = schedlock_off;
+static char *scheduler_enums[] =
+{schedlock_off, schedlock_on, schedlock_step};
+
+static void
+set_schedlock_func (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (c->type == set_cmd)
+    if (!target_can_lock_scheduler)
+      {
+	scheduler_mode = schedlock_off;
+	error ("Target '%s' cannot support this command.",
+	       target_shortname);
+      }
+}
+
+
+/* Resume the inferior, but allow a QUIT.  This is useful if the user
+   wants to interrupt some lengthy single-stepping operation
+   (for child processes, the SIGINT goes to the inferior, and so
+   we get a SIGINT random_signal, but for remote debugging and perhaps
+   other targets, that's not true).
+
+   STEP nonzero if we should step (zero to continue instead).
+   SIG is the signal to give the inferior (zero for none).  */
+void
+resume (step, sig)
+     int step;
+     enum target_signal sig;
+{
+  int should_resume = 1;
+  struct cleanup *old_cleanups = make_cleanup ((make_cleanup_func)
+					       resume_cleanups, 0);
+  QUIT;
+
+#ifdef CANNOT_STEP_BREAKPOINT
+  /* Most targets can step a breakpoint instruction, thus executing it
+     normally.  But if this one cannot, just continue and we will hit
+     it anyway.  */
+  if (step && breakpoints_inserted && breakpoint_here_p (read_pc ()))
+    step = 0;
+#endif
+
+  if (SOFTWARE_SINGLE_STEP_P && step)
+    {
+      /* Do it the hard way, w/temp breakpoints */
+      SOFTWARE_SINGLE_STEP (sig, 1 /*insert-breakpoints*/ );
+      /* ...and don't ask hardware to do it.  */
+      step = 0;
+      /* and do not pull these breakpoints until after a `wait' in
+         `wait_for_inferior' */
+      singlestep_breakpoints_inserted_p = 1;
+    }
+
+  /* Handle any optimized stores to the inferior NOW...  */
+#ifdef DO_DEFERRED_STORES
+  DO_DEFERRED_STORES;
+#endif
+
+#ifdef HPUXHPPA
+  /* If there were any forks/vforks/execs that were caught and are
+     now to be followed, then do so. */
+  switch (pending_follow.kind)
+    {
+    case (TARGET_WAITKIND_FORKED):
+      pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+      follow_fork (inferior_pid, pending_follow.fork_event.child_pid);
+      break;
+
+    case (TARGET_WAITKIND_VFORKED):
+      {
+	int saw_child_exec = pending_follow.fork_event.saw_child_exec;
+
+	pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+	follow_vfork (inferior_pid, pending_follow.fork_event.child_pid);
+
+	/* Did we follow the child, but not yet see the child's exec event?
+             If so, then it actually ought to be waiting for us; we respond to
+             parent vfork events.  We don't actually want to resume the child
+             in this situation; we want to just get its exec event. */
+	if (!saw_child_exec &&
+	    (inferior_pid == pending_follow.fork_event.child_pid))
+	  should_resume = 0;
+      }
+      break;
+
+    case (TARGET_WAITKIND_EXECD):
+      /* If we saw a vfork event but couldn't follow it until we saw
+           an exec, then now might be the time! */
+      pending_follow.kind = TARGET_WAITKIND_SPURIOUS;
+      /* follow_exec is called as soon as the exec event is seen. */
+      break;
+
+    default:
+      break;
+    }
+#endif /* HPUXHPPA */
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  if (should_resume)
+    {
+#ifdef HPUXHPPA
+      if (thread_step_needed)
+	{
+	  /* We stopped on a BPT instruction;
+	     don't continue other threads and
+	     just step this thread. */
+	  thread_step_needed = 0;
+
+	  if (!breakpoint_here_p (read_pc ()))
+	    {
+	      /* Breakpoint deleted: ok to do regular resume
+		 where all the threads either step or continue. */
+	      target_resume (-1, step, sig);
+	    }
+	  else
+	    {
+	      if (!step)
+		{
+		  warning ("Internal error, changing continue to step.");
+		  remove_breakpoints ();
+		  breakpoints_inserted = 0;
+		  trap_expected = 1;
+		  step = 1;
+		}
+
+	      target_resume (inferior_pid, step, sig);
+	    }
+	}
+      else
+#endif /* HPUXHPPA */
+	{
+	  /* Vanilla resume. */
+
+	  if ((scheduler_mode == schedlock_on) ||
+	      (scheduler_mode == schedlock_step && step != 0))
+	    target_resume (inferior_pid, step, sig);
+	  else
+	    target_resume (-1, step, sig);
+	}
+    }
+
+  discard_cleanups (old_cleanups);
+}
+
+
+/* Clear out all variables saying what to do when inferior is continued.
+   First do this, then set the ones you want, then call `proceed'.  */
+
+void
+clear_proceed_status ()
+{
+  trap_expected = 0;
+  step_range_start = 0;
+  step_range_end = 0;
+  step_frame_address = 0;
+  step_over_calls = -1;
+  stop_after_trap = 0;
+  stop_soon_quietly = 0;
+  proceed_to_finish = 0;
+  breakpoint_proceeded = 1;	/* We're about to proceed... */
+
+  /* Discard any remaining commands or status from previous stop.  */
+  bpstat_clear (&stop_bpstat);
+}
+
+/* Basic routine for continuing the program in various fashions.
+
+   ADDR is the address to resume at, or -1 for resume where stopped.
+   SIGGNAL is the signal to give it, or 0 for none,
+     or -1 for act according to how it stopped.
+   STEP is nonzero if should trap after one instruction.
+     -1 means return after that and print nothing.
+     You should probably set various step_... variables
+     before calling here, if you are stepping.
+
+   You should call clear_proceed_status before calling proceed.  */
+
+void
+proceed (addr, siggnal, step)
+     CORE_ADDR addr;
+     enum target_signal siggnal;
+     int step;
+{
+  int oneproc = 0;
+
+  if (step > 0)
+    step_start_function = find_pc_function (read_pc ());
+  if (step < 0)
+    stop_after_trap = 1;
+
+  if (addr == (CORE_ADDR) - 1)
+    {
+      /* If there is a breakpoint at the address we will resume at,
+	 step one instruction before inserting breakpoints
+	 so that we do not stop right away (and report a second
+         hit at this breakpoint).  */
+
+      if (read_pc () == stop_pc && breakpoint_here_p (read_pc ()))
+	oneproc = 1;
+
+#ifndef STEP_SKIPS_DELAY
+#define STEP_SKIPS_DELAY(pc) (0)
+#define STEP_SKIPS_DELAY_P (0)
+#endif
+      /* Check breakpoint_here_p first, because breakpoint_here_p is fast
+	 (it just checks internal GDB data structures) and STEP_SKIPS_DELAY
+	 is slow (it needs to read memory from the target).  */
+      if (STEP_SKIPS_DELAY_P
+	  && breakpoint_here_p (read_pc () + 4)
+	  && STEP_SKIPS_DELAY (read_pc ()))
+	oneproc = 1;
+    }
+  else
+    {
+      write_pc (addr);
+
+      /* New address; we don't need to single-step a thread
+	 over a breakpoint we just hit, 'cause we aren't
+	 continuing from there.
+
+	 It's not worth worrying about the case where a user
+	 asks for a "jump" at the current PC--if they get the
+	 hiccup of re-hiting a hit breakpoint, what else do
+	 they expect? */
+      thread_step_needed = 0;
+    }
+
+#ifdef PREPARE_TO_PROCEED
+  /* In a multi-threaded task we may select another thread
+     and then continue or step.
+
+     But if the old thread was stopped at a breakpoint, it
+     will immediately cause another breakpoint stop without
+     any execution (i.e. it will report a breakpoint hit
+     incorrectly).  So we must step over it first.
+
+     PREPARE_TO_PROCEED checks the current thread against the thread
+     that reported the most recent event.  If a step-over is required
+     it returns TRUE and sets the current thread to the old thread. */
+  if (PREPARE_TO_PROCEED () && breakpoint_here_p (read_pc ()))
+    {
+      oneproc = 1;
+      thread_step_needed = 1;
+    }
+
+#endif /* PREPARE_TO_PROCEED */
+
+#ifdef HP_OS_BUG
+  if (trap_expected_after_continue)
+    {
+      /* If (step == 0), a trap will be automatically generated after
+	 the first instruction is executed.  Force step one
+	 instruction to clear this condition.  This should not occur
+	 if step is nonzero, but it is harmless in that case.  */
+      oneproc = 1;
+      trap_expected_after_continue = 0;
+    }
+#endif /* HP_OS_BUG */
+
+  if (oneproc)
+    /* We will get a trace trap after one instruction.
+       Continue it automatically and insert breakpoints then.  */
+    trap_expected = 1;
+  else
+    {
+      int temp = insert_breakpoints ();
+      if (temp)
+	{
+	  print_sys_errmsg ("ptrace", temp);
+	  error ("Cannot insert breakpoints.\n\
+The same program may be running in another process.");
+	}
+
+      breakpoints_inserted = 1;
+    }
+
+  if (siggnal != TARGET_SIGNAL_DEFAULT)
+    stop_signal = siggnal;
+  /* If this signal should not be seen by program,
+     give it zero.  Used for debugging signals.  */
+  else if (!signal_program[stop_signal])
+    stop_signal = TARGET_SIGNAL_0;
+
+  annotate_starting ();
+
+  /* Make sure that output from GDB appears before output from the
+     inferior.  */
+  gdb_flush (gdb_stdout);
+
+  /* Resume inferior.  */
+  resume (oneproc || step || bpstat_should_step (), stop_signal);
+
+  /* Wait for it to stop (if not standalone)
+     and in any case decode why it stopped, and act accordingly.  */
+
+  wait_for_inferior ();
+  normal_stop ();
+}
+
+/* Record the pc and sp of the program the last time it stopped.
+   These are just used internally by wait_for_inferior, but need
+   to be preserved over calls to it and cleared when the inferior
+   is started.  */
+static CORE_ADDR prev_pc;
+static CORE_ADDR prev_func_start;
+static char *prev_func_name;
+
+
+/* Start remote-debugging of a machine over a serial link.  */
+
+void
+start_remote ()
+{
+  init_thread_list ();
+  init_wait_for_inferior ();
+  stop_soon_quietly = 1;
+  trap_expected = 0;
+  wait_for_inferior ();
+  normal_stop ();
+}
+
+/* Initialize static vars when a new inferior begins.  */
+
+void
+init_wait_for_inferior ()
+{
+  /* These are meaningless until the first time through wait_for_inferior.  */
+  prev_pc = 0;
+  prev_func_start = 0;
+  prev_func_name = NULL;
+
+#ifdef HP_OS_BUG
+  trap_expected_after_continue = 0;
+#endif
+  breakpoints_inserted = 0;
+  breakpoint_init_inferior (inf_starting);
+
+  /* Don't confuse first call to proceed(). */
+  stop_signal = TARGET_SIGNAL_0;
+
+  /* The first resume is not following a fork/vfork/exec. */
+  pending_follow.kind = TARGET_WAITKIND_SPURIOUS;	/* I.e., none. */
+  pending_follow.fork_event.saw_parent_fork = 0;
+  pending_follow.fork_event.saw_child_fork = 0;
+  pending_follow.fork_event.saw_child_exec = 0;
+
+  /* See wait_for_inferior's handling of SYSCALL_ENTRY/RETURN events. */
+  number_of_threads_in_syscalls = 0;
+
+  clear_proceed_status ();
+}
+
+static void
+delete_breakpoint_current_contents (arg)
+     PTR arg;
+{
+  struct breakpoint **breakpointp = (struct breakpoint **) arg;
+  if (*breakpointp != NULL)
+    {
+      delete_breakpoint (*breakpointp);
+      *breakpointp = NULL;
+    }
+}
+
+/* Wait for control to return from inferior to debugger.
+   If inferior gets a signal, we may decide to start it up again
+   instead of returning.  That is why there is a loop in this function.
+   When this function actually returns it means the inferior
+   should be left stopped and GDB should read more commands.  */
+
+void
+wait_for_inferior ()
+{
+  struct cleanup *old_cleanups;
+  struct target_waitstatus w;
+  int another_trap;
+  int random_signal = 0;
+  CORE_ADDR stop_func_start;
+  CORE_ADDR stop_func_end;
+  char *stop_func_name;
+#if 0
+  CORE_ADDR prologue_pc = 0;
+#endif
+  CORE_ADDR tmp;
+  struct symtab_and_line sal;
+  int remove_breakpoints_on_following_step = 0;
+  int current_line;
+  struct symtab *current_symtab;
+  int handling_longjmp = 0;	/* FIXME */
+  int pid;
+  int saved_inferior_pid;
+  int update_step_sp = 0;
+  int stepping_through_solib_after_catch = 0;
+  bpstat stepping_through_solib_catchpoints = NULL;
+  int enable_hw_watchpoints_after_wait = 0;
+  int stepping_through_sigtramp = 0;
+  int new_thread_event;
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+  int stepped_after_stopped_by_watchpoint;
+#endif
+
+  old_cleanups = make_cleanup (delete_breakpoint_current_contents,
+			       &step_resume_breakpoint);
+  make_cleanup (delete_breakpoint_current_contents,
+		&through_sigtramp_breakpoint);
+  sal = find_pc_line (prev_pc, 0);
+  current_line = sal.line;
+  current_symtab = sal.symtab;
+
+  /* Are we stepping?  */
+#define CURRENTLY_STEPPING() \
+  ((through_sigtramp_breakpoint == NULL \
+    && !handling_longjmp \
+    && ((step_range_end && step_resume_breakpoint == NULL) \
+	|| trap_expected)) \
+   || stepping_through_solib_after_catch \
+   || bpstat_should_step ())
+  ;
+  thread_step_needed = 0;
+
+#ifdef HPUXHPPA
+  /* We'll update this if & when we switch to a new thread. */
+  switched_from_inferior_pid = inferior_pid;
+#endif
+
+  while (1)
+    {
+      extern int overlay_cache_invalid;	/* declared in symfile.h */
+
+      overlay_cache_invalid = 1;
+
+      /* We have to invalidate the registers BEFORE calling target_wait because
+	 they can be loaded from the target while in target_wait.  This makes
+	 remote debugging a bit more efficient for those targets that provide
+	 critical registers as part of their normal status mechanism. */
+
+      registers_changed ();
+
+      if (target_wait_hook)
+	pid = target_wait_hook (-1, &w);
+      else
+	pid = target_wait (-1, &w);
+
+      /* Since we've done a wait, we have a new event.  Don't carry
+         over any expectations about needing to step over a
+         breakpoint. */
+      thread_step_needed = 0;
+
+      /* See comments where a TARGET_WAITKIND_SYSCALL_RETURN event is
+         serviced in this loop, below. */
+      if (enable_hw_watchpoints_after_wait)
+	{
+	  TARGET_ENABLE_HW_WATCHPOINTS (inferior_pid);
+	  enable_hw_watchpoints_after_wait = 0;
+	}
+
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+      stepped_after_stopped_by_watchpoint = 0;
+#endif
+
+      /* Gross.
+
+       We goto this label from elsewhere in wait_for_inferior when we want
+       to continue the main loop without calling "wait" and trashing the
+       waitstatus contained in W.  */
+    have_waited:
+
+      flush_cached_frames ();
+
+      /* If it's a new process, add it to the thread database */
+
+      new_thread_event = ((pid != inferior_pid) && !in_thread_list (pid));
+
+      if (w.kind != TARGET_WAITKIND_EXITED
+	  && w.kind != TARGET_WAITKIND_SIGNALLED
+	  && new_thread_event)
+	{
+	  add_thread (pid);
+
+
+#ifdef HPUXHPPA
+	  fprintf_unfiltered (gdb_stderr, "[New %s]\n",
+			      target_pid_or_tid_to_str (pid));
+
+#else
+	  printf_filtered ("[New %s]\n", target_pid_to_str (pid));
+#endif
+
+#if 0
+	  /* NOTE: This block is ONLY meant to be invoked in case of a
+	     "thread creation event"!  If it is invoked for any other
+	     sort of event (such as a new thread landing on a breakpoint),
+	     the event will be discarded, which is almost certainly
+	     a bad thing!
+	
+	     To avoid this, the low-level module (eg. target_wait)
+	     should call in_thread_list and add_thread, so that the
+	     new thread is known by the time we get here.  */
+
+	  /* We may want to consider not doing a resume here in order
+	     to give the user a chance to play with the new thread.
+	     It might be good to make that a user-settable option.  */
+
+	  /* At this point, all threads are stopped (happens
+	     automatically in either the OS or the native code).
+	     Therefore we need to continue all threads in order to
+	     make progress.  */
+
+	  target_resume (-1, 0, TARGET_SIGNAL_0);
+	  continue;
+#endif
+	}
+
+      switch (w.kind)
+	{
+	case TARGET_WAITKIND_LOADED:
+	  /* Ignore gracefully during startup of the inferior, as it
+	     might be the shell which has just loaded some objects,
+	     otherwise add the symbols for the newly loaded objects.  */
+#ifdef SOLIB_ADD
+	  if (!stop_soon_quietly)
+	    {
+	      extern int auto_solib_add;
+
+	      /* Remove breakpoints, SOLIB_ADD might adjust
+		 breakpoint addresses via breakpoint_re_set.  */
+	      if (breakpoints_inserted)
+		remove_breakpoints ();
+
+	      /* Check for any newly added shared libraries if we're
+		 supposed to be adding them automatically.  */
+	      if (auto_solib_add)
+		{
+		  /* Switch terminal for any messages produced by
+		     breakpoint_re_set.  */
+		  target_terminal_ours_for_output ();
+		  SOLIB_ADD (NULL, 0, NULL);
+		  target_terminal_inferior ();
+		}
+
+	      /* Reinsert breakpoints and continue.  */
+	      if (breakpoints_inserted)
+		insert_breakpoints ();
+	    }
+#endif
+	  resume (0, TARGET_SIGNAL_0);
+	  continue;
+
+	case TARGET_WAITKIND_SPURIOUS:
+	  resume (0, TARGET_SIGNAL_0);
+	  continue;
+
+	case TARGET_WAITKIND_EXITED:
+	  target_terminal_ours ();	/* Must do this before mourn anyway */
+	  annotate_exited (w.value.integer);
+	  if (w.value.integer)
+	    printf_filtered ("\nProgram exited with code 0%o.\n",
+			     (unsigned int) w.value.integer);
+	  else
+	    printf_filtered ("\nProgram exited normally.\n");
+
+	  /* Record the exit code in the convenience variable $_exitcode, so
+	     that the user can inspect this again later.  */
+	  set_internalvar (lookup_internalvar ("_exitcode"),
+			   value_from_longest (builtin_type_int,
+					       (LONGEST) w.value.integer));
+	  gdb_flush (gdb_stdout);
+	  target_mourn_inferior ();
+	  singlestep_breakpoints_inserted_p = 0;	/*SOFTWARE_SINGLE_STEP_P*/
+	  stop_print_frame = 0;
+	  goto stop_stepping;
+
+	case TARGET_WAITKIND_SIGNALLED:
+	  stop_print_frame = 0;
+	  stop_signal = w.value.sig;
+	  target_terminal_ours ();	/* Must do this before mourn anyway */
+	  annotate_signalled ();
+
+	  /* This looks pretty bogus to me.  Doesn't TARGET_WAITKIND_SIGNALLED
+	     mean it is already dead?  This has been here since GDB 2.8, so
+	     perhaps it means rms didn't understand unix waitstatuses?
+	     For the moment I'm just kludging around this in remote.c
+	     rather than trying to change it here --kingdon, 5 Dec 1994.  */
+	  target_kill ();	/* kill mourns as well */
+
+	  printf_filtered ("\nProgram terminated with signal ");
+	  annotate_signal_name ();
+	  printf_filtered ("%s", target_signal_to_name (stop_signal));
+	  annotate_signal_name_end ();
+	  printf_filtered (", ");
+	  annotate_signal_string ();
+	  printf_filtered ("%s", target_signal_to_string (stop_signal));
+	  annotate_signal_string_end ();
+	  printf_filtered (".\n");
+
+	  printf_filtered ("The program no longer exists.\n");
+	  gdb_flush (gdb_stdout);
+	  singlestep_breakpoints_inserted_p = 0;	/*SOFTWARE_SINGLE_STEP_P*/
+	  goto stop_stepping;
+
+	  /* The following are the only cases in which we keep going;
+           the above cases end in a continue or goto. */
+	case TARGET_WAITKIND_FORKED:
+	  stop_signal = TARGET_SIGNAL_TRAP;
+	  pending_follow.kind = w.kind;
+
+	  /* Ignore fork events reported for the parent; we're only
+             interested in reacting to forks of the child.  Note that
+             we expect the child's fork event to be available if we
+             waited for it now. */
+	  if (inferior_pid == pid)
+	    {
+	      pending_follow.fork_event.saw_parent_fork = 1;
+	      pending_follow.fork_event.parent_pid = pid;
+	      pending_follow.fork_event.child_pid = w.value.related_pid;
+	      continue;
+	    }
+	  else
+	    {
+	      pending_follow.fork_event.saw_child_fork = 1;
+	      pending_follow.fork_event.child_pid = pid;
+	      pending_follow.fork_event.parent_pid = w.value.related_pid;
+	    }
+
+	  stop_pc = read_pc_pid (pid);
+	  saved_inferior_pid = inferior_pid;
+	  inferior_pid = pid;
+	  stop_bpstat = bpstat_stop_status
+	    (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+	     (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+	      && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+	     0
+#endif /* DECR_PC_AFTER_BREAK zero */
+	    );
+	  random_signal = !bpstat_explains_signal (stop_bpstat);
+	  inferior_pid = saved_inferior_pid;
+	  goto process_event_stop_test;
+
+	  /* If this a platform which doesn't allow a debugger to touch a
+           vfork'd inferior until after it exec's, then we'd best keep
+           our fingers entirely off the inferior, other than continuing
+           it.  This has the unfortunate side-effect that catchpoints
+           of vforks will be ignored.  But since the platform doesn't
+           allow the inferior be touched at vfork time, there's really
+           little choice. */
+	case TARGET_WAITKIND_VFORKED:
+	  stop_signal = TARGET_SIGNAL_TRAP;
+	  pending_follow.kind = w.kind;
+
+	  /* Is this a vfork of the parent?  If so, then give any
+             vfork catchpoints a chance to trigger now.  (It's
+             dangerous to do so if the child canot be touched until
+             it execs, and the child has not yet exec'd.  We probably
+             should warn the user to that effect when the catchpoint
+             triggers...) */
+	  if (pid == inferior_pid)
+	    {
+	      pending_follow.fork_event.saw_parent_fork = 1;
+	      pending_follow.fork_event.parent_pid = pid;
+	      pending_follow.fork_event.child_pid = w.value.related_pid;
+	    }
+
+	  /* If we've seen the child's vfork event but cannot really touch
+             the child until it execs, then we must continue the child now.
+             Else, give any vfork catchpoints a chance to trigger now. */
+	  else
+	    {
+	      pending_follow.fork_event.saw_child_fork = 1;
+	      pending_follow.fork_event.child_pid = pid;
+	      pending_follow.fork_event.parent_pid = w.value.related_pid;
+	      target_post_startup_inferior (pending_follow.fork_event.child_pid);
+	      follow_vfork_when_exec = !target_can_follow_vfork_prior_to_exec ();
+	      if (follow_vfork_when_exec)
+		{
+		  target_resume (pid, 0, TARGET_SIGNAL_0);
+		  continue;
+		}
+	    }
+
+	  stop_pc = read_pc ();
+	  stop_bpstat = bpstat_stop_status
+	    (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+	     (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+	      && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+	     0
+#endif /* DECR_PC_AFTER_BREAK zero */
+	    );
+	  random_signal = !bpstat_explains_signal (stop_bpstat);
+	  goto process_event_stop_test;
+
+	case TARGET_WAITKIND_EXECD:
+	  stop_signal = TARGET_SIGNAL_TRAP;
+
+	  /* Is this a target which reports multiple exec events per actual
+             call to exec()?  (HP-UX using ptrace does, for example.)  If so,
+             ignore all but the last one.  Just resume the exec'r, and wait
+             for the next exec event. */
+	  if (inferior_ignoring_leading_exec_events)
+	    {
+	      inferior_ignoring_leading_exec_events--;
+	      if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+		ENSURE_VFORKING_PARENT_REMAINS_STOPPED (pending_follow.fork_event.parent_pid);
+	      target_resume (pid, 0, TARGET_SIGNAL_0);
+	      continue;
+	    }
+	  inferior_ignoring_leading_exec_events =
+	    target_reported_exec_events_per_exec_call () - 1;
+
+	  pending_follow.execd_pathname = savestring (w.value.execd_pathname,
+					   strlen (w.value.execd_pathname));
+
+	  /* Did inferior_pid exec, or did a (possibly not-yet-followed)
+             child of a vfork exec?
+
+             ??rehrauer: This is unabashedly an HP-UX specific thing.  On
+             HP-UX, events associated with a vforking inferior come in
+             threes: a vfork event for the child (always first), followed
+             a vfork event for the parent and an exec event for the child.
+             The latter two can come in either order.
+
+             If we get the parent vfork event first, life's good: We follow
+             either the parent or child, and then the child's exec event is
+             a "don't care".
+
+             But if we get the child's exec event first, then we delay
+             responding to it until we handle the parent's vfork.  Because,
+             otherwise we can't satisfy a "catch vfork". */
+	  if (pending_follow.kind == TARGET_WAITKIND_VFORKED)
+	    {
+	      pending_follow.fork_event.saw_child_exec = 1;
+
+	      /* On some targets, the child must be resumed before
+                 the parent vfork event is delivered.  A single-step
+                 suffices. */
+	      if (RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK ())
+		target_resume (pid, 1, TARGET_SIGNAL_0);
+	      /* We expect the parent vfork event to be available now. */
+	      continue;
+	    }
+
+	  /* This causes the eventpoints and symbol table to be reset.  Must
+             do this now, before trying to determine whether to stop. */
+	  follow_exec (inferior_pid, pending_follow.execd_pathname);
+	  free (pending_follow.execd_pathname);
+
+	  stop_pc = read_pc_pid (pid);
+	  saved_inferior_pid = inferior_pid;
+	  inferior_pid = pid;
+	  stop_bpstat = bpstat_stop_status
+	    (&stop_pc,
+#if DECR_PC_AFTER_BREAK
+	     (prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+	      && CURRENTLY_STEPPING ())
+#else /* DECR_PC_AFTER_BREAK zero */
+	     0
+#endif /* DECR_PC_AFTER_BREAK zero */
+	    );
+	  random_signal = !bpstat_explains_signal (stop_bpstat);
+	  inferior_pid = saved_inferior_pid;
+	  goto process_event_stop_test;
+
+	  /* These syscall events are returned on HP-UX, as part of its
+           implementation of page-protection-based "hardware" watchpoints.
+           HP-UX has unfortunate interactions between page-protections and
+           some system calls.  Our solution is to disable hardware watches
+           when a system call is entered, and reenable them when the syscall
+           completes.  The downside of this is that we may miss the precise
+           point at which a watched piece of memory is modified.  "Oh well."
+
+           Note that we may have multiple threads running, which may each
+           enter syscalls at roughly the same time.  Since we don't have a
+           good notion currently of whether a watched piece of memory is
+           thread-private, we'd best not have any page-protections active
+           when any thread is in a syscall.  Thus, we only want to reenable
+           hardware watches when no threads are in a syscall.
+
+           Also, be careful not to try to gather much state about a thread
+           that's in a syscall.  It's frequently a losing proposition. */
+	case TARGET_WAITKIND_SYSCALL_ENTRY:
+	  number_of_threads_in_syscalls++;
+	  if (number_of_threads_in_syscalls == 1)
+	    {
+	      TARGET_DISABLE_HW_WATCHPOINTS (inferior_pid);
+	    }
+	  resume (0, TARGET_SIGNAL_0);
+	  continue;
+
+	  /* Before examining the threads further, step this thread to
+	   get it entirely out of the syscall.  (We get notice of the
+	   event when the thread is just on the verge of exiting a
+	   syscall.  Stepping one instruction seems to get it back
+	   into user code.)
+
+	   Note that although the logical place to reenable h/w watches
+	   is here, we cannot.  We cannot reenable them before stepping
+	   the thread (this causes the next wait on the thread to hang).
+
+	   Nor can we enable them after stepping until we've done a wait.
+	   Thus, we simply set the flag enable_hw_watchpoints_after_wait
+	   here, which will be serviced immediately after the target
+	   is waited on. */
+	case TARGET_WAITKIND_SYSCALL_RETURN:
+	  target_resume (pid, 1, TARGET_SIGNAL_0);
+
+	  if (number_of_threads_in_syscalls > 0)
+	    {
+	      number_of_threads_in_syscalls--;
+	      enable_hw_watchpoints_after_wait =
+		(number_of_threads_in_syscalls == 0);
+	    }
+	  continue;
+
+	case TARGET_WAITKIND_STOPPED:
+	  stop_signal = w.value.sig;
+	  break;
+	}
+
+      /* We may want to consider not doing a resume here in order to give
+         the user a chance to play with the new thread.  It might be good
+         to make that a user-settable option.  */
+
+      /* At this point, all threads are stopped (happens automatically in
+         either the OS or the native code).  Therefore we need to continue
+         all threads in order to make progress.  */
+      if (new_thread_event)
+	{
+	  target_resume (-1, 0, TARGET_SIGNAL_0);
+	  continue;
+	}
+
+      stop_pc = read_pc_pid (pid);
+
+      /* See if a thread hit a thread-specific breakpoint that was meant for
+	 another thread.  If so, then step that thread past the breakpoint,
+	 and continue it.  */
+
+      if (stop_signal == TARGET_SIGNAL_TRAP)
+	{
+	  if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
+	    random_signal = 0;
+	  else if (breakpoints_inserted
+		   && breakpoint_here_p (stop_pc - DECR_PC_AFTER_BREAK))
+	    {
+	      random_signal = 0;
+	      if (!breakpoint_thread_match (stop_pc - DECR_PC_AFTER_BREAK,
+					    pid))
+		{
+		  int remove_status;
+
+		  /* Saw a breakpoint, but it was hit by the wrong thread.
+		       Just continue. */
+		  write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK, pid);
+
+		  remove_status = remove_breakpoints ();
+		  /* Did we fail to remove breakpoints?  If so, try
+                       to set the PC past the bp.  (There's at least
+                       one situation in which we can fail to remove
+                       the bp's: On HP-UX's that use ttrace, we can't
+                       change the address space of a vforking child
+                       process until the child exits (well, okay, not
+                       then either :-) or execs. */
+		  if (remove_status != 0)
+		    {
+		      write_pc_pid (stop_pc - DECR_PC_AFTER_BREAK + 4, pid);
+		    }
+		  else
+		    {		/* Single step */
+		      target_resume (pid, 1, TARGET_SIGNAL_0);
+		      /* FIXME: What if a signal arrives instead of the
+			   single-step happening?  */
+
+		      if (target_wait_hook)
+			target_wait_hook (pid, &w);
+		      else
+			target_wait (pid, &w);
+		      insert_breakpoints ();
+		    }
+
+		  /* We need to restart all the threads now.  */
+		  target_resume (-1, 0, TARGET_SIGNAL_0);
+		  continue;
+		}
+	      else
+		{
+		  /* This breakpoint matches--either it is the right
+		       thread or it's a generic breakpoint for all threads.
+		       Remember that we'll need to step just _this_ thread
+		       on any following user continuation! */
+		  thread_step_needed = 1;
+		}
+	    }
+	}
+      else
+	random_signal = 1;
+
+      /* See if something interesting happened to the non-current thread.  If
+         so, then switch to that thread, and eventually give control back to
+	 the user.
+
+         Note that if there's any kind of pending follow (i.e., of a fork,
+         vfork or exec), we don't want to do this now.  Rather, we'll let
+         the next resume handle it. */
+      if ((pid != inferior_pid) &&
+	  (pending_follow.kind == TARGET_WAITKIND_SPURIOUS))
+	{
+	  int printed = 0;
+
+	  /* If it's a random signal for a non-current thread, notify user
+	     if he's expressed an interest. */
+	  if (random_signal
+	      && signal_print[stop_signal])
+	    {
+/* ??rehrauer: I don't understand the rationale for this code.  If the
+   inferior will stop as a result of this signal, then the act of handling
+   the stop ought to print a message that's couches the stoppage in user
+   terms, e.g., "Stopped for breakpoint/watchpoint".  If the inferior
+   won't stop as a result of the signal -- i.e., if the signal is merely
+   a side-effect of something GDB's doing "under the covers" for the
+   user, such as stepping threads over a breakpoint they shouldn't stop
+   for -- then the message seems to be a serious annoyance at best.
+
+   For now, remove the message altogether. */
+#if 0
+	      printed = 1;
+	      target_terminal_ours_for_output ();
+	      printf_filtered ("\nProgram received signal %s, %s.\n",
+			       target_signal_to_name (stop_signal),
+			       target_signal_to_string (stop_signal));
+	      gdb_flush (gdb_stdout);
+#endif
+	    }
+
+	  /* If it's not SIGTRAP and not a signal we want to stop for, then
+	     continue the thread. */
+
+	  if (stop_signal != TARGET_SIGNAL_TRAP
+	      && !signal_stop[stop_signal])
+	    {
+	      if (printed)
+		target_terminal_inferior ();
+
+	      /* Clear the signal if it should not be passed.  */
+	      if (signal_program[stop_signal] == 0)
+		stop_signal = TARGET_SIGNAL_0;
+
+	      target_resume (pid, 0, stop_signal);
+	      continue;
+	    }
+
+	  /* It's a SIGTRAP or a signal we're interested in.  Switch threads,
+	     and fall into the rest of wait_for_inferior().  */
+
+	  /* Save infrun state for the old thread.  */
+	  save_infrun_state (inferior_pid, prev_pc,
+			     prev_func_start, prev_func_name,
+			     trap_expected, step_resume_breakpoint,
+			     through_sigtramp_breakpoint,
+			     step_range_start, step_range_end,
+			     step_frame_address, handling_longjmp,
+			     another_trap,
+			     stepping_through_solib_after_catch,
+			     stepping_through_solib_catchpoints,
+			     stepping_through_sigtramp);
+
+#ifdef HPUXHPPA
+	  switched_from_inferior_pid = inferior_pid;
+#endif
+
+	  inferior_pid = pid;
+
+	  /* Load infrun state for the new thread.  */
+	  load_infrun_state (inferior_pid, &prev_pc,
+			     &prev_func_start, &prev_func_name,
+			     &trap_expected, &step_resume_breakpoint,
+			     &through_sigtramp_breakpoint,
+			     &step_range_start, &step_range_end,
+			     &step_frame_address, &handling_longjmp,
+			     &another_trap,
+			     &stepping_through_solib_after_catch,
+			     &stepping_through_solib_catchpoints,
+			     &stepping_through_sigtramp);
+
+	  if (context_hook)
+	    context_hook (pid_to_thread_id (pid));
+
+	  printf_filtered ("[Switching to %s]\n", target_pid_to_str (pid));
+	  flush_cached_frames ();
+	}
+
+      if (SOFTWARE_SINGLE_STEP_P && singlestep_breakpoints_inserted_p)
+	{
+	  /* Pull the single step breakpoints out of the target. */
+	  SOFTWARE_SINGLE_STEP (0, 0);
+	  singlestep_breakpoints_inserted_p = 0;
+	}
+
+      /* If PC is pointing at a nullified instruction, then step beyond
+	 it so that the user won't be confused when GDB appears to be ready
+	 to execute it. */
+
+#if 0				/* XXX DEBUG */
+      printf ("infrun.c:1607: pc = 0x%x\n", read_pc ());
+#endif
+      /*      if (INSTRUCTION_NULLIFIED && CURRENTLY_STEPPING ()) */
+      if (INSTRUCTION_NULLIFIED)
+	{
+	  struct target_waitstatus tmpstatus;
+#if 0
+	  all_registers_info ((char *) 0, 0);
+#endif
+	  registers_changed ();
+	  target_resume (pid, 1, TARGET_SIGNAL_0);
+
+	  /* We may have received a signal that we want to pass to
+	     the inferior; therefore, we must not clobber the waitstatus
+	     in W.  So we call wait ourselves, then continue the loop
+	     at the "have_waited" label.  */
+	  if (target_wait_hook)
+	    target_wait_hook (pid, &tmpstatus);
+	  else
+	    target_wait (pid, &tmpstatus);
+
+	  goto have_waited;
+	}
+
+#ifdef HAVE_STEPPABLE_WATCHPOINT
+      /* It may not be necessary to disable the watchpoint to stop over
+	 it.  For example, the PA can (with some kernel cooperation)
+	 single step over a watchpoint without disabling the watchpoint.  */
+      if (STOPPED_BY_WATCHPOINT (w))
+	{
+	  resume (1, 0);
+	  continue;
+	}
+#endif
+
+#ifdef HAVE_NONSTEPPABLE_WATCHPOINT
+      /* It is far more common to need to disable a watchpoint
+	 to step the inferior over it.  FIXME.  What else might
+	 a debug register or page protection watchpoint scheme need
+	 here?  */
+      if (STOPPED_BY_WATCHPOINT (w))
+	{
+/* At this point, we are stopped at an instruction which has attempted to write
+   to a piece of memory under control of a watchpoint.  The instruction hasn't
+   actually executed yet.  If we were to evaluate the watchpoint expression
+   now, we would get the old value, and therefore no change would seem to have
+   occurred.
+
+   In order to make watchpoints work `right', we really need to complete the
+   memory write, and then evaluate the watchpoint expression.  The following
+   code does that by removing the watchpoint (actually, all watchpoints and
+   breakpoints), single-stepping the target, re-inserting watchpoints, and then
+   falling through to let normal single-step processing handle proceed.  Since
+   this includes evaluating watchpoints, things will come to a stop in the
+   correct manner.  */
+
+	  write_pc (stop_pc - DECR_PC_AFTER_BREAK);
+
+	  remove_breakpoints ();
+	  registers_changed ();
+	  target_resume (pid, 1, TARGET_SIGNAL_0);	/* Single step */
+
+	  if (target_wait_hook)
+	    target_wait_hook (pid, &w);
+	  else
+	    target_wait (pid, &w);
+	  insert_breakpoints ();
+
+	  /* FIXME-maybe: is this cleaner than setting a flag?  Does it
+	     handle things like signals arriving and other things happening
+	     in combination correctly?  */
+	  stepped_after_stopped_by_watchpoint = 1;
+	  goto have_waited;
+	}
+#endif
+
+#ifdef HAVE_CONTINUABLE_WATCHPOINT
+      /* It may be possible to simply continue after a watchpoint.  */
+      STOPPED_BY_WATCHPOINT (w);
+#endif
+
+      stop_func_start = 0;
+      stop_func_end = 0;
+      stop_func_name = 0;
+      /* Don't care about return value; stop_func_start and stop_func_name
+	 will both be 0 if it doesn't work.  */
+      find_pc_partial_function (stop_pc, &stop_func_name, &stop_func_start,
+				&stop_func_end);
+      stop_func_start += FUNCTION_START_OFFSET;
+      another_trap = 0;
+      bpstat_clear (&stop_bpstat);
+      stop_step = 0;
+      stop_stack_dummy = 0;
+      stop_print_frame = 1;
+      random_signal = 0;
+      stopped_by_random_signal = 0;
+      breakpoints_failed = 0;
+
+      /* Look at the cause of the stop, and decide what to do.
+	 The alternatives are:
+	 1) break; to really stop and return to the debugger,
+	 2) drop through to start up again
+	 (set another_trap to 1 to single step once)
+	 3) set random_signal to 1, and the decision between 1 and 2
+	 will be made according to the signal handling tables.  */
+
+      /* First, distinguish signals caused by the debugger from signals
+	 that have to do with the program's own actions.
+	 Note that breakpoint insns may cause SIGTRAP or SIGILL
+	 or SIGEMT, depending on the operating system version.
+	 Here we detect when a SIGILL or SIGEMT is really a breakpoint
+	 and change it to SIGTRAP.  */
+
+      if (stop_signal == TARGET_SIGNAL_TRAP
+	  || (breakpoints_inserted &&
+	      (stop_signal == TARGET_SIGNAL_ILL
+	       || stop_signal == TARGET_SIGNAL_EMT
+	      ))
+	  || stop_soon_quietly)
+	{
+	  if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
+	    {
+	      stop_print_frame = 0;
+	      break;
+	    }
+	  if (stop_soon_quietly)
+	    break;
+
+	  /* Don't even think about breakpoints
+	     if just proceeded over a breakpoint.
+
+	     However, if we are trying to proceed over a breakpoint
+	     and end up in sigtramp, then through_sigtramp_breakpoint
+	     will be set and we should check whether we've hit the
+	     step breakpoint.  */
+	  if (stop_signal == TARGET_SIGNAL_TRAP && trap_expected
+	      && through_sigtramp_breakpoint == NULL)
+	    bpstat_clear (&stop_bpstat);
+	  else
+	    {
+	      /* See if there is a breakpoint at the current PC.  */
+	      stop_bpstat = bpstat_stop_status
+		(&stop_pc,
+		 (DECR_PC_AFTER_BREAK ?
+	      /* Notice the case of stepping through a jump
+		    that lands just after a breakpoint.
+		    Don't confuse that with hitting the breakpoint.
+		    What we check for is that 1) stepping is going on
+		    and 2) the pc before the last insn does not match
+		    the address of the breakpoint before the current pc
+		    and 3) we didn't hit a breakpoint in a signal handler
+		    without an intervening stop in sigtramp, which is
+		    detected by a new stack pointer value below
+		    any usual function calling stack adjustments.  */
+		  (CURRENTLY_STEPPING ()
+		   && prev_pc != stop_pc - DECR_PC_AFTER_BREAK
+		   && !(step_range_end
+			&& INNER_THAN (read_sp (), (step_sp - 16)))) :
+		  0)
+		);
+	      /* Following in case break condition called a
+		 function.  */
+	      stop_print_frame = 1;
+	    }
+
+	  if (stop_signal == TARGET_SIGNAL_TRAP)
+	    random_signal
+	      = !(bpstat_explains_signal (stop_bpstat)
+		  || trap_expected
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+		  || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+				       FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET.  */
+		  || (step_range_end && step_resume_breakpoint == NULL));
+
+	  else
+	    {
+	      random_signal
+		= !(bpstat_explains_signal (stop_bpstat)
+	      /* End of a stack dummy.  Some systems (e.g. Sony
+		       news) give another signal besides SIGTRAP,
+		       so check here as well as above.  */
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+		    || PC_IN_CALL_DUMMY (stop_pc, read_sp (),
+					 FRAME_FP (get_current_frame ()))
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET.  */
+		);
+	      if (!random_signal)
+		stop_signal = TARGET_SIGNAL_TRAP;
+	    }
+	}
+
+      /* When we reach this point, we've pretty much decided
+         that the reason for stopping must've been a random
+         (unexpected) signal. */
+
+      else
+	random_signal = 1;
+      /* If a fork, vfork or exec event was seen, then there are two
+         possible responses we can make:
+
+         1. If a catchpoint triggers for the event (random_signal == 0),
+            then we must stop now and issue a prompt.  We will resume
+            the inferior when the user tells us to.
+         2. If no catchpoint triggers for the event (random_signal == 1),
+            then we must resume the inferior now and keep checking.
+
+         In either case, we must take appropriate steps to "follow" the
+         the fork/vfork/exec when the inferior is resumed.  For example,
+         if follow-fork-mode is "child", then we must detach from the
+         parent inferior and follow the new child inferior.
+
+         In either case, setting pending_follow causes the next resume()
+         to take the appropriate following action. */
+    process_event_stop_test:
+      if (w.kind == TARGET_WAITKIND_FORKED)
+	{
+	  if (random_signal)	/* I.e., no catchpoint triggered for this. */
+	    {
+	      trap_expected = 1;
+	      stop_signal = TARGET_SIGNAL_0;
+	      goto keep_going;
+	    }
+	}
+      else if (w.kind == TARGET_WAITKIND_VFORKED)
+	{
+	  if (random_signal)	/* I.e., no catchpoint triggered for this. */
+	    {
+	      stop_signal = TARGET_SIGNAL_0;
+	      goto keep_going;
+	    }
+	}
+      else if (w.kind == TARGET_WAITKIND_EXECD)
+	{
+	  pending_follow.kind = w.kind;
+	  if (random_signal)	/* I.e., no catchpoint triggered for this. */
+	    {
+	      trap_expected = 1;
+	      stop_signal = TARGET_SIGNAL_0;
+	      goto keep_going;
+	    }
+	}
+
+      /* For the program's own signals, act according to
+	 the signal handling tables.  */
+
+      if (random_signal)
+	{
+	  /* Signal not for debugging purposes.  */
+	  int printed = 0;
+
+	  stopped_by_random_signal = 1;
+
+	  if (signal_print[stop_signal])
+	    {
+	      printed = 1;
+	      target_terminal_ours_for_output ();
+	      annotate_signal ();
+	      printf_filtered ("\nProgram received signal ");
+	      annotate_signal_name ();
+	      printf_filtered ("%s", target_signal_to_name (stop_signal));
+	      annotate_signal_name_end ();
+	      printf_filtered (", ");
+	      annotate_signal_string ();
+	      printf_filtered ("%s", target_signal_to_string (stop_signal));
+	      annotate_signal_string_end ();
+	      printf_filtered (".\n");
+	      gdb_flush (gdb_stdout);
+	    }
+	  if (signal_stop[stop_signal])
+	    break;
+	  /* If not going to stop, give terminal back
+	     if we took it away.  */
+	  else if (printed)
+	    target_terminal_inferior ();
+
+	  /* Clear the signal if it should not be passed.  */
+	  if (signal_program[stop_signal] == 0)
+	    stop_signal = TARGET_SIGNAL_0;
+
+	  /* If we're in the middle of a "next" command, let the code for
+             stepping over a function handle this. pai/1997-09-10
+
+             A previous comment here suggested it was possible to change
+             this to jump to keep_going in all cases. */
+
+	  if (step_over_calls > 0)
+	    goto step_over_function;
+	  else
+	    goto check_sigtramp2;
+	}
+
+      /* Handle cases caused by hitting a breakpoint.  */
+      {
+	CORE_ADDR jmp_buf_pc;
+	struct bpstat_what what;
+
+	what = bpstat_what (stop_bpstat);
+
+	if (what.call_dummy)
+	  {
+	    stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+	    trap_expected_after_continue = 1;
+#endif
+	  }
+
+	switch (what.main_action)
+	  {
+	  case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+	    /* If we hit the breakpoint at longjmp, disable it for the
+	       duration of this command.  Then, install a temporary
+	       breakpoint at the target of the jmp_buf. */
+	    disable_longjmp_breakpoint ();
+	    remove_breakpoints ();
+	    breakpoints_inserted = 0;
+	    if (!GET_LONGJMP_TARGET (&jmp_buf_pc))
+	      goto keep_going;
+
+	    /* Need to blow away step-resume breakpoint, as it
+	       interferes with us */
+	    if (step_resume_breakpoint != NULL)
+	      {
+		delete_breakpoint (step_resume_breakpoint);
+		step_resume_breakpoint = NULL;
+	      }
+	    /* Not sure whether we need to blow this away too, but probably
+	       it is like the step-resume breakpoint.  */
+	    if (through_sigtramp_breakpoint != NULL)
+	      {
+		delete_breakpoint (through_sigtramp_breakpoint);
+		through_sigtramp_breakpoint = NULL;
+	      }
+
+#if 0
+	    /* FIXME - Need to implement nested temporary breakpoints */
+	    if (step_over_calls > 0)
+	      set_longjmp_resume_breakpoint (jmp_buf_pc,
+					     get_current_frame ());
+	    else
+#endif /* 0 */
+	      set_longjmp_resume_breakpoint (jmp_buf_pc, NULL);
+	    handling_longjmp = 1;	/* FIXME */
+	    goto keep_going;
+
+	  case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+	  case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
+	    remove_breakpoints ();
+	    breakpoints_inserted = 0;
+#if 0
+	    /* FIXME - Need to implement nested temporary breakpoints */
+	    if (step_over_calls
+		&& (INNER_THAN (FRAME_FP (get_current_frame ()),
+				step_frame_address)))
+	      {
+		another_trap = 1;
+		goto keep_going;
+	      }
+#endif /* 0 */
+	    disable_longjmp_breakpoint ();
+	    handling_longjmp = 0;	/* FIXME */
+	    if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
+	      break;
+	    /* else fallthrough */
+
+	  case BPSTAT_WHAT_SINGLE:
+	    if (breakpoints_inserted)
+	      {
+		thread_step_needed = 1;
+		remove_breakpoints ();
+	      }
+	    breakpoints_inserted = 0;
+	    another_trap = 1;
+	    /* Still need to check other stuff, at least the case
+	       where we are stepping and step out of the right range.  */
+	    break;
+
+	  case BPSTAT_WHAT_STOP_NOISY:
+	    stop_print_frame = 1;
+
+	    /* We are about to nuke the step_resume_breakpoint and
+	       through_sigtramp_breakpoint via the cleanup chain, so
+	       no need to worry about it here.  */
+
+	    goto stop_stepping;
+
+	  case BPSTAT_WHAT_STOP_SILENT:
+	    stop_print_frame = 0;
+
+	    /* We are about to nuke the step_resume_breakpoint and
+	       through_sigtramp_breakpoint via the cleanup chain, so
+	       no need to worry about it here.  */
+
+	    goto stop_stepping;
+
+	  case BPSTAT_WHAT_STEP_RESUME:
+	    /* This proably demands a more elegant solution, but, yeah
+               right...
+
+               This function's use of the simple variable
+               step_resume_breakpoint doesn't seem to accomodate
+               simultaneously active step-resume bp's, although the
+               breakpoint list certainly can.
+
+               If we reach here and step_resume_breakpoint is already
+               NULL, then apparently we have multiple active
+               step-resume bp's.  We'll just delete the breakpoint we
+               stopped at, and carry on.  */
+	    if (step_resume_breakpoint == NULL)
+	      {
+		step_resume_breakpoint =
+		  bpstat_find_step_resume_breakpoint (stop_bpstat);
+	      }
+	    delete_breakpoint (step_resume_breakpoint);
+	    step_resume_breakpoint = NULL;
+	    break;
+
+	  case BPSTAT_WHAT_THROUGH_SIGTRAMP:
+	    if (through_sigtramp_breakpoint)
+	      delete_breakpoint (through_sigtramp_breakpoint);
+	    through_sigtramp_breakpoint = NULL;
+
+	    /* If were waiting for a trap, hitting the step_resume_break
+	       doesn't count as getting it.  */
+	    if (trap_expected)
+	      another_trap = 1;
+	    break;
+
+	  case BPSTAT_WHAT_CHECK_SHLIBS:
+	  case BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK:
+#ifdef SOLIB_ADD
+	    {
+	      extern int auto_solib_add;
+
+	      /* Remove breakpoints, we eventually want to step over the
+		 shlib event breakpoint, and SOLIB_ADD might adjust
+		 breakpoint addresses via breakpoint_re_set.  */
+	      if (breakpoints_inserted)
+		remove_breakpoints ();
+	      breakpoints_inserted = 0;
+
+	      /* Check for any newly added shared libraries if we're
+		 supposed to be adding them automatically.  */
+	      if (auto_solib_add)
+		{
+		  /* Switch terminal for any messages produced by
+		     breakpoint_re_set.  */
+		  target_terminal_ours_for_output ();
+		  SOLIB_ADD (NULL, 0, NULL);
+		  target_terminal_inferior ();
+		}
+
+	      /* Try to reenable shared library breakpoints, additional
+		 code segments in shared libraries might be mapped in now. */
+	      re_enable_breakpoints_in_shlibs ();
+
+	      /* If requested, stop when the dynamic linker notifies
+		 gdb of events.  This allows the user to get control
+		 and place breakpoints in initializer routines for
+		 dynamically loaded objects (among other things).  */
+	      if (stop_on_solib_events)
+		{
+		  stop_print_frame = 0;
+		  goto stop_stepping;
+		}
+
+	      /* If we stopped due to an explicit catchpoint, then the
+                 (see above) call to SOLIB_ADD pulled in any symbols
+                 from a newly-loaded library, if appropriate.
+
+                 We do want the inferior to stop, but not where it is
+                 now, which is in the dynamic linker callback.  Rather,
+                 we would like it stop in the user's program, just after
+                 the call that caused this catchpoint to trigger.  That
+                 gives the user a more useful vantage from which to
+                 examine their program's state. */
+	      else if (what.main_action == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+		{
+		  /* ??rehrauer: If I could figure out how to get the
+                     right return PC from here, we could just set a temp
+                     breakpoint and resume.  I'm not sure we can without
+                     cracking open the dld's shared libraries and sniffing
+                     their unwind tables and text/data ranges, and that's
+                     not a terribly portable notion.
+
+                     Until that time, we must step the inferior out of the
+                     dld callback, and also out of the dld itself (and any
+                     code or stubs in libdld.sl, such as "shl_load" and
+                     friends) until we reach non-dld code.  At that point,
+                     we can stop stepping. */
+		  bpstat_get_triggered_catchpoints (stop_bpstat,
+				       &stepping_through_solib_catchpoints);
+		  stepping_through_solib_after_catch = 1;
+
+		  /* Be sure to lift all breakpoints, so the inferior does
+                     actually step past this point... */
+		  another_trap = 1;
+		  break;
+		}
+	      else
+		{
+		  /* We want to step over this breakpoint, then keep going.  */
+		  another_trap = 1;
+		  break;
+		}
+	    }
+#endif
+	    break;
+
+	  case BPSTAT_WHAT_LAST:
+	    /* Not a real code, but listed here to shut up gcc -Wall.  */
+
+	  case BPSTAT_WHAT_KEEP_CHECKING:
+	    break;
+	  }
+      }
+
+      /* We come here if we hit a breakpoint but should not
+	 stop for it.  Possibly we also were stepping
+	 and should stop for that.  So fall through and
+	 test for stepping.  But, if not stepping,
+	 do not stop.  */
+
+      /* Are we stepping to get the inferior out of the dynamic
+         linker's hook (and possibly the dld itself) after catching
+         a shlib event? */
+      if (stepping_through_solib_after_catch)
+	{
+#if defined(SOLIB_ADD)
+	  /* Have we reached our destination?  If not, keep going. */
+	  if (SOLIB_IN_DYNAMIC_LINKER (pid, stop_pc))
+	    {
+	      another_trap = 1;
+	      goto keep_going;
+	    }
+#endif
+	  /* Else, stop and report the catchpoint(s) whose triggering
+             caused us to begin stepping. */
+	  stepping_through_solib_after_catch = 0;
+	  bpstat_clear (&stop_bpstat);
+	  stop_bpstat = bpstat_copy (stepping_through_solib_catchpoints);
+	  bpstat_clear (&stepping_through_solib_catchpoints);
+	  stop_print_frame = 1;
+	  goto stop_stepping;
+	}
+
+#ifndef CALL_DUMMY_BREAKPOINT_OFFSET
+      /* This is the old way of detecting the end of the stack dummy.
+	 An architecture which defines CALL_DUMMY_BREAKPOINT_OFFSET gets
+	 handled above.  As soon as we can test it on all of them, all
+	 architectures should define it.  */
+
+      /* If this is the breakpoint at the end of a stack dummy,
+	 just stop silently, unless the user was doing an si/ni, in which
+	 case she'd better know what she's doing.  */
+
+      if (CALL_DUMMY_HAS_COMPLETED (stop_pc, read_sp (),
+				    FRAME_FP (get_current_frame ()))
+	  && !step_range_end)
+	{
+	  stop_print_frame = 0;
+	  stop_stack_dummy = 1;
+#ifdef HP_OS_BUG
+	  trap_expected_after_continue = 1;
+#endif
+	  break;
+	}
+#endif /* No CALL_DUMMY_BREAKPOINT_OFFSET.  */
+
+      if (step_resume_breakpoint)
+	/* Having a step-resume breakpoint overrides anything
+	   else having to do with stepping commands until
+	   that breakpoint is reached.  */
+	/* I'm not sure whether this needs to be check_sigtramp2 or
+	   whether it could/should be keep_going.  */
+	goto check_sigtramp2;
+
+      if (step_range_end == 0)
+	/* Likewise if we aren't even stepping.  */
+	/* I'm not sure whether this needs to be check_sigtramp2 or
+	   whether it could/should be keep_going.  */
+	goto check_sigtramp2;
+
+      /* If stepping through a line, keep going if still within it.
+
+         Note that step_range_end is the address of the first instruction
+         beyond the step range, and NOT the address of the last instruction
+         within it! */
+      if (stop_pc >= step_range_start
+	  && stop_pc < step_range_end
+#if 0
+/* I haven't a clue what might trigger this clause, and it seems wrong
+   anyway, so I've disabled it until someone complains.  -Stu 10/24/95 */
+
+      /* The step range might include the start of the
+	     function, so if we are at the start of the
+	     step range and either the stack or frame pointers
+	     just changed, we've stepped outside */
+	  && !(stop_pc == step_range_start
+	       && FRAME_FP (get_current_frame ())
+	       && (INNER_THAN (read_sp (), step_sp)
+		   || FRAME_FP (get_current_frame ()) != step_frame_address))
+#endif
+	)
+	{
+	  /* We might be doing a BPSTAT_WHAT_SINGLE and getting a signal.
+	     So definately need to check for sigtramp here.  */
+	  goto check_sigtramp2;
+	}
+
+      /* We stepped out of the stepping range.  */
+
+      /* If we are stepping at the source level and entered the runtime
+         loader dynamic symbol resolution code, we keep on single stepping
+	 until we exit the run time loader code and reach the callee's
+	 address.  */
+      if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc))
+	goto keep_going;
+
+      /* We can't update step_sp every time through the loop, because
+	 reading the stack pointer would slow down stepping too much.
+	 But we can update it every time we leave the step range.  */
+      update_step_sp = 1;
+
+      /* Did we just take a signal?  */
+      if (IN_SIGTRAMP (stop_pc, stop_func_name)
+	  && !IN_SIGTRAMP (prev_pc, prev_func_name)
+	  && INNER_THAN (read_sp (), step_sp))
+	{
+	  /* We've just taken a signal; go until we are back to
+	     the point where we took it and one more.  */
+
+	  /* Note: The test above succeeds not only when we stepped
+             into a signal handler, but also when we step past the last
+             statement of a signal handler and end up in the return stub
+             of the signal handler trampoline.  To distinguish between
+             these two cases, check that the frame is INNER_THAN the
+             previous one below. pai/1997-09-11 */
+
+
+	  {
+	    CORE_ADDR current_frame = FRAME_FP (get_current_frame ());
+
+	    if (INNER_THAN (current_frame, step_frame_address))
+	      {
+		/* We have just taken a signal; go until we are back to
+                   the point where we took it and one more.  */
+
+		/* This code is needed at least in the following case:
+                   The user types "next" and then a signal arrives (before
+                   the "next" is done).  */
+
+		/* Note that if we are stopped at a breakpoint, then we need
+                   the step_resume breakpoint to override any breakpoints at
+                   the same location, so that we will still step over the
+                   breakpoint even though the signal happened.  */
+		struct symtab_and_line sr_sal;
+
+		INIT_SAL (&sr_sal);
+		sr_sal.symtab = NULL;
+		sr_sal.line = 0;
+		sr_sal.pc = prev_pc;
+		/* We could probably be setting the frame to
+                   step_frame_address; I don't think anyone thought to
+                   try it.  */
+		step_resume_breakpoint =
+		  set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+		if (breakpoints_inserted)
+		  insert_breakpoints ();
+	      }
+	    else
+	      {
+		/* We just stepped out of a signal handler and into
+                   its calling trampoline.
+
+                   Normally, we'd jump to step_over_function from
+                   here, but for some reason GDB can't unwind the
+                   stack correctly to find the real PC for the point
+                   user code where the signal trampoline will return
+                   -- FRAME_SAVED_PC fails, at least on HP-UX 10.20.
+                   But signal trampolines are pretty small stubs of
+                   code, anyway, so it's OK instead to just
+                   single-step out.  Note: assuming such trampolines
+                   don't exhibit recursion on any platform... */
+		find_pc_partial_function (stop_pc, &stop_func_name,
+					  &stop_func_start,
+					  &stop_func_end);
+		/* Readjust stepping range */
+		step_range_start = stop_func_start;
+		step_range_end = stop_func_end;
+		stepping_through_sigtramp = 1;
+	      }
+	  }
+
+
+	  /* If this is stepi or nexti, make sure that the stepping range
+	     gets us past that instruction.  */
+	  if (step_range_end == 1)
+	    /* FIXME: Does this run afoul of the code below which, if
+	       we step into the middle of a line, resets the stepping
+	       range?  */
+	    step_range_end = (step_range_start = prev_pc) + 1;
+
+	  remove_breakpoints_on_following_step = 1;
+	  goto keep_going;
+	}
+
+#if 0
+      /* I disabled this test because it was too complicated and slow.
+	 The SKIP_PROLOGUE was especially slow, because it caused
+	 unnecessary prologue examination on various architectures.
+	 The code in the #else clause has been tested on the Sparc,
+	 Mips, PA, and Power architectures, so it's pretty likely to
+	 be correct.  -Stu 10/24/95 */
+
+      /* See if we left the step range due to a subroutine call that
+	 we should proceed to the end of.  */
+
+      if (stop_func_start)
+	{
+	  struct symtab *s;
+
+	  /* Do this after the IN_SIGTRAMP check; it might give
+	     an error.  */
+	  prologue_pc = stop_func_start;
+
+	  /* Don't skip the prologue if this is assembly source */
+	  s = find_pc_symtab (stop_pc);
+	  if (s && s->language != language_asm)
+	    SKIP_PROLOGUE (prologue_pc);
+	}
+
+      if (!(INNER_THAN (step_sp, read_sp ()))	/* don't mistake (sig)return
+						   as a call */
+	  && (			/* Might be a non-recursive call.  If the symbols are missing
+		 enough that stop_func_start == prev_func_start even though
+		 they are really two functions, we will treat some calls as
+		 jumps.  */
+	       stop_func_start != prev_func_start
+
+      /* Might be a recursive call if either we have a prologue
+		 or the call instruction itself saves the PC on the stack.  */
+	       || prologue_pc != stop_func_start
+	       || read_sp () != step_sp)
+	  && (			/* PC is completely out of bounds of any known objfiles.  Treat
+		 like a subroutine call. */
+	       !stop_func_start
+
+      /* If we do a call, we will be at the start of a function...  */
+	       || stop_pc == stop_func_start
+
+      /* ...except on the Alpha with -O (and also Irix 5 and
+		 perhaps others), in which we might call the address
+		 after the load of gp.  Since prologues don't contain
+		 calls, we can't return to within one, and we don't
+		 jump back into them, so this check is OK.  */
+
+	       || stop_pc < prologue_pc
+
+      /* ...and if it is a leaf function, the prologue might
+ 		 consist of gp loading only, so the call transfers to
+ 		 the first instruction after the prologue.  */
+	       || (stop_pc == prologue_pc
+
+      /* Distinguish this from the case where we jump back
+		     to the first instruction after the prologue,
+		     within a function.  */
+		   && stop_func_start != prev_func_start)
+
+      /* If we end up in certain places, it means we did a subroutine
+		 call.  I'm not completely sure this is necessary now that we
+		 have the above checks with stop_func_start (and now that
+		 find_pc_partial_function is pickier).  */
+	       || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+
+      /* If none of the above apply, it is a jump within a function,
+		 or a return from a subroutine.  The other case is longjmp,
+		 which can no longer happen here as long as the
+		 handling_longjmp stuff is working.  */
+	  ))
+#else
+      /* This test is a much more streamlined, (but hopefully correct)
+	   replacement for the code above.  It's been tested on the Sparc,
+	   Mips, PA, and Power architectures with good results.  */
+
+      if (stop_pc == stop_func_start	/* Quick test */
+	  || (in_prologue (stop_pc, stop_func_start) &&
+	      !IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name))
+	  || IN_SOLIB_CALL_TRAMPOLINE (stop_pc, stop_func_name)
+	  || stop_func_name == 0)
+#endif
+
+	{
+	  /* It's a subroutine call.  */
+
+	  if (step_over_calls == 0)
+	    {
+	      /* I presume that step_over_calls is only 0 when we're
+		 supposed to be stepping at the assembly language level
+		 ("stepi").  Just stop.  */
+	      stop_step = 1;
+	      break;
+	    }
+
+	  if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc))
+	    /* We're doing a "next".  */
+	    goto step_over_function;
+
+	  /* If we are in a function call trampoline (a stub between
+	     the calling routine and the real function), locate the real
+	     function.  That's what tells us (a) whether we want to step
+	     into it at all, and (b) what prologue we want to run to
+	     the end of, if we do step into it.  */
+	  tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+	  if (tmp != 0)
+	    stop_func_start = tmp;
+	  else
+	    {
+	      tmp = DYNAMIC_TRAMPOLINE_NEXTPC (stop_pc);
+	      if (tmp)
+		{
+		  struct symtab_and_line xxx;
+		  /* Why isn't this s_a_l called "sr_sal", like all of the
+		     other s_a_l's where this code is duplicated?  */
+		  INIT_SAL (&xxx);	/* initialize to zeroes */
+		  xxx.pc = tmp;
+		  xxx.section = find_pc_overlay (xxx.pc);
+		  step_resume_breakpoint =
+		    set_momentary_breakpoint (xxx, NULL, bp_step_resume);
+		  insert_breakpoints ();
+		  goto keep_going;
+		}
+	    }
+
+	  /* If we have line number information for the function we
+	     are thinking of stepping into, step into it.
+
+	     If there are several symtabs at that PC (e.g. with include
+	     files), just want to know whether *any* of them have line
+	     numbers.  find_pc_line handles this.  */
+	  {
+	    struct symtab_and_line tmp_sal;
+
+	    tmp_sal = find_pc_line (stop_func_start, 0);
+	    if (tmp_sal.line != 0)
+	      goto step_into_function;
+	  }
+
+	step_over_function:
+	  /* A subroutine call has happened.  */
+	  {
+	    /* Set a special breakpoint after the return */
+	    struct symtab_and_line sr_sal;
+
+	    INIT_SAL (&sr_sal);
+	    sr_sal.symtab = NULL;
+	    sr_sal.line = 0;
+
+	    /* If we came here after encountering a signal in the middle of
+               a "next", use the stashed-away previous frame pc */
+	    sr_sal.pc
+	      = stopped_by_random_signal
+	      ? prev_pc
+	      : ADDR_BITS_REMOVE (SAVED_PC_AFTER_CALL (get_current_frame ()));
+
+	    step_resume_breakpoint =
+	      set_momentary_breakpoint (sr_sal,
+					stopped_by_random_signal ?
+					NULL : get_current_frame (),
+					bp_step_resume);
+
+	    /* We've just entered a callee, and we wish to resume until
+               it returns to the caller.  Setting a step_resume bp on
+               the return PC will catch a return from the callee.
+
+               However, if the callee is recursing, we want to be
+               careful not to catch returns of those recursive calls,
+               but of THIS instance of the call.
+
+               To do this, we set the step_resume bp's frame to our
+               current caller's frame (step_frame_address, which is
+               set by the "next" or "until" command, before execution
+               begins).
+
+               But ... don't do it if we're single-stepping out of a
+               sigtramp, because the reason we're single-stepping is
+               precisely because unwinding is a problem (HP-UX 10.20,
+               e.g.) and the frame address is likely to be incorrect.
+               No danger of sigtramp recursion.  */
+
+	    if (stepping_through_sigtramp)
+	      {
+		step_resume_breakpoint->frame = (CORE_ADDR) NULL;
+		stepping_through_sigtramp = 0;
+	      }
+	    else if (!IN_SOLIB_DYNSYM_RESOLVE_CODE (sr_sal.pc))
+	      step_resume_breakpoint->frame = step_frame_address;
+
+	    if (breakpoints_inserted)
+	      insert_breakpoints ();
+	  }
+	  goto keep_going;
+
+	step_into_function:
+	  /* Subroutine call with source code we should not step over.
+	     Do step to the first line of code in it.  */
+	  {
+	    struct symtab *s;
+
+	    s = find_pc_symtab (stop_pc);
+	    if (s && s->language != language_asm)
+	      SKIP_PROLOGUE (stop_func_start);
+	  }
+	  sal = find_pc_line (stop_func_start, 0);
+	  /* Use the step_resume_break to step until
+	     the end of the prologue, even if that involves jumps
+	     (as it seems to on the vax under 4.2).  */
+	  /* If the prologue ends in the middle of a source line,
+	     continue to the end of that source line (if it is still
+	     within the function).  Otherwise, just go to end of prologue.  */
+#ifdef PROLOGUE_FIRSTLINE_OVERLAP
+	  /* no, don't either.  It skips any code that's
+	     legitimately on the first line.  */
+#else
+	  if (sal.end && sal.pc != stop_func_start && sal.end < stop_func_end)
+	    stop_func_start = sal.end;
+#endif
+
+	  if (stop_func_start == stop_pc)
+	    {
+	      /* We are already there: stop now.  */
+	      stop_step = 1;
+	      break;
+	    }
+	  else
+	    /* Put the step-breakpoint there and go until there. */
+	    {
+	      struct symtab_and_line sr_sal;
+
+	      INIT_SAL (&sr_sal);	/* initialize to zeroes */
+	      sr_sal.pc = stop_func_start;
+	      sr_sal.section = find_pc_overlay (stop_func_start);
+	      /* Do not specify what the fp should be when we stop
+		 since on some machines the prologue
+		 is where the new fp value is established.  */
+	      step_resume_breakpoint =
+		set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+	      if (breakpoints_inserted)
+		insert_breakpoints ();
+
+	      /* And make sure stepping stops right away then.  */
+	      step_range_end = step_range_start;
+	    }
+	  goto keep_going;
+	}
+
+      /* We've wandered out of the step range.  */
+
+      sal = find_pc_line (stop_pc, 0);
+
+      if (step_range_end == 1)
+	{
+	  /* It is stepi or nexti.  We always want to stop stepping after
+	     one instruction.  */
+	  stop_step = 1;
+	  break;
+	}
+
+      /* If we're in the return path from a shared library trampoline,
+	 we want to proceed through the trampoline when stepping.  */
+      if (IN_SOLIB_RETURN_TRAMPOLINE (stop_pc, stop_func_name))
+	{
+	  CORE_ADDR tmp;
+
+	  /* Determine where this trampoline returns.  */
+	  tmp = SKIP_TRAMPOLINE_CODE (stop_pc);
+
+	  /* Only proceed through if we know where it's going.  */
+	  if (tmp)
+	    {
+	      /* And put the step-breakpoint there and go until there. */
+	      struct symtab_and_line sr_sal;
+
+	      INIT_SAL (&sr_sal);	/* initialize to zeroes */
+	      sr_sal.pc = tmp;
+	      sr_sal.section = find_pc_overlay (sr_sal.pc);
+	      /* Do not specify what the fp should be when we stop
+		 since on some machines the prologue
+		 is where the new fp value is established.  */
+	      step_resume_breakpoint =
+		set_momentary_breakpoint (sr_sal, NULL, bp_step_resume);
+	      if (breakpoints_inserted)
+		insert_breakpoints ();
+
+	      /* Restart without fiddling with the step ranges or
+		 other state.  */
+	      goto keep_going;
+	    }
+	}
+
+      if (sal.line == 0)
+	{
+	  /* We have no line number information.  That means to stop
+	     stepping (does this always happen right after one instruction,
+	     when we do "s" in a function with no line numbers,
+	     or can this happen as a result of a return or longjmp?).  */
+	  stop_step = 1;
+	  break;
+	}
+
+      if ((stop_pc == sal.pc)
+	  && (current_line != sal.line || current_symtab != sal.symtab))
+	{
+	  /* We are at the start of a different line.  So stop.  Note that
+	     we don't stop if we step into the middle of a different line.
+	     That is said to make things like for (;;) statements work
+	     better.  */
+	  stop_step = 1;
+	  break;
+	}
+
+      /* We aren't done stepping.
+
+	 Optimize by setting the stepping range to the line.
+	 (We might not be in the original line, but if we entered a
+	 new line in mid-statement, we continue stepping.  This makes
+	 things like for(;;) statements work better.)  */
+
+      if (stop_func_end && sal.end >= stop_func_end)
+	{
+	  /* If this is the last line of the function, don't keep stepping
+	     (it would probably step us out of the function).
+	     This is particularly necessary for a one-line function,
+	     in which after skipping the prologue we better stop even though
+	     we will be in mid-line.  */
+	  stop_step = 1;
+	  break;
+	}
+      step_range_start = sal.pc;
+      step_range_end = sal.end;
+      step_frame_address = FRAME_FP (get_current_frame ());
+      current_line = sal.line;
+      current_symtab = sal.symtab;
+
+      /* In the case where we just stepped out of a function into the middle
+         of a line of the caller, continue stepping, but step_frame_address
+         must be modified to current frame */
+      {
+	CORE_ADDR current_frame = FRAME_FP (get_current_frame ());
+	if (!(INNER_THAN (current_frame, step_frame_address)))
+	  step_frame_address = current_frame;
+      }
+
+
+      goto keep_going;
+
+    check_sigtramp2:
+      if (trap_expected
+	  && IN_SIGTRAMP (stop_pc, stop_func_name)
+	  && !IN_SIGTRAMP (prev_pc, prev_func_name)
+	  && INNER_THAN (read_sp (), step_sp))
+	{
+	  /* What has happened here is that we have just stepped the inferior
+	     with a signal (because it is a signal which shouldn't make
+	     us stop), thus stepping into sigtramp.
+
+	     So we need to set a step_resume_break_address breakpoint
+	     and continue until we hit it, and then step.  FIXME: This should
+	     be more enduring than a step_resume breakpoint; we should know
+	     that we will later need to keep going rather than re-hitting
+	     the breakpoint here (see testsuite/gdb.t06/signals.exp where
+	     it says "exceedingly difficult").  */
+	  struct symtab_and_line sr_sal;
+
+	  INIT_SAL (&sr_sal);	/* initialize to zeroes */
+	  sr_sal.pc = prev_pc;
+	  sr_sal.section = find_pc_overlay (sr_sal.pc);
+	  /* We perhaps could set the frame if we kept track of what
+	     the frame corresponding to prev_pc was.  But we don't,
+	     so don't.  */
+	  through_sigtramp_breakpoint =
+	    set_momentary_breakpoint (sr_sal, NULL, bp_through_sigtramp);
+	  if (breakpoints_inserted)
+	    insert_breakpoints ();
+
+	  remove_breakpoints_on_following_step = 1;
+	  another_trap = 1;
+	}
+
+    keep_going:
+      /* Come to this label when you need to resume the inferior.
+	 It's really much cleaner to do a goto than a maze of if-else
+	 conditions.  */
+
+      /* ??rehrauer: ttrace on HP-UX theoretically allows one to debug
+         a vforked child beetween its creation and subsequent exit or
+         call to exec().  However, I had big problems in this rather
+         creaky exec engine, getting that to work.  The fundamental
+         problem is that I'm trying to debug two processes via an
+         engine that only understands a single process with possibly
+         multiple threads.
+
+         Hence, this spot is known to have problems when
+         target_can_follow_vfork_prior_to_exec returns 1. */
+
+      /* Save the pc before execution, to compare with pc after stop.  */
+      prev_pc = read_pc ();	/* Might have been DECR_AFTER_BREAK */
+      prev_func_start = stop_func_start;	/* Ok, since if DECR_PC_AFTER
+					  BREAK is defined, the
+					  original pc would not have
+					  been at the start of a
+					  function. */
+      prev_func_name = stop_func_name;
+
+      if (update_step_sp)
+	step_sp = read_sp ();
+      update_step_sp = 0;
+
+      /* If we did not do break;, it means we should keep
+	 running the inferior and not return to debugger.  */
+
+      if (trap_expected && stop_signal != TARGET_SIGNAL_TRAP)
+	{
+	  /* We took a signal (which we are supposed to pass through to
+	     the inferior, else we'd have done a break above) and we
+	     haven't yet gotten our trap.  Simply continue.  */
+	  resume (CURRENTLY_STEPPING (), stop_signal);
+	}
+      else
+	{
+	  /* Either the trap was not expected, but we are continuing
+	     anyway (the user asked that this signal be passed to the
+	     child)
+	       -- or --
+	     The signal was SIGTRAP, e.g. it was our signal, but we
+	     decided we should resume from it.
+
+	     We're going to run this baby now!
+
+	     Insert breakpoints now, unless we are trying
+	     to one-proceed past a breakpoint.  */
+	  /* If we've just finished a special step resume and we don't
+	     want to hit a breakpoint, pull em out.  */
+	  if (step_resume_breakpoint == NULL
+	      && through_sigtramp_breakpoint == NULL
+	      && remove_breakpoints_on_following_step)
+	    {
+	      remove_breakpoints_on_following_step = 0;
+	      remove_breakpoints ();
+	      breakpoints_inserted = 0;
+	    }
+	  else if (!breakpoints_inserted &&
+		   (through_sigtramp_breakpoint != NULL || !another_trap))
+	    {
+	      breakpoints_failed = insert_breakpoints ();
+	      if (breakpoints_failed)
+		break;
+	      breakpoints_inserted = 1;
+	    }
+
+	  trap_expected = another_trap;
+
+          /* Do not deliver SIGNAL_TRAP (except when the user
+	     explicitly specifies that such a signal should be
+	     delivered to the target program).
+
+	     Typically, this would occure when a user is debugging a
+	     target monitor on a simulator: the target monitor sets a
+	     breakpoint; the simulator encounters this break-point and
+	     halts the simulation handing control to GDB; GDB, noteing
+	     that the break-point isn't valid, returns control back to
+	     the simulator; the simulator then delivers the hardware
+	     equivalent of a SIGNAL_TRAP to the program being
+	     debugged. */
+
+	  if (stop_signal == TARGET_SIGNAL_TRAP
+	      && !signal_program[stop_signal])
+	    stop_signal = TARGET_SIGNAL_0;
+
+#ifdef SHIFT_INST_REGS
+	  /* I'm not sure when this following segment applies.  I do know,
+	     now, that we shouldn't rewrite the regs when we were stopped
+	     by a random signal from the inferior process.  */
+	  /* FIXME: Shouldn't this be based on the valid bit of the SXIP?
+	     (this is only used on the 88k).  */
+
+	  if (!bpstat_explains_signal (stop_bpstat)
+	      && (stop_signal != TARGET_SIGNAL_CHLD)
+	      && !stopped_by_random_signal)
+	    SHIFT_INST_REGS ();
+#endif /* SHIFT_INST_REGS */
+
+	  resume (CURRENTLY_STEPPING (), stop_signal);
+	}
+    }
+
+stop_stepping:
+  if (target_has_execution)
+    {
+      /* Are we stopping for a vfork event?  We only stop when we see
+         the child's event.  However, we may not yet have seen the
+         parent's event.  And, inferior_pid is still set to the parent's
+         pid, until we resume again and follow either the parent or child.
+
+         To ensure that we can really touch inferior_pid (aka, the
+         parent process) -- which calls to functions like read_pc
+         implicitly do -- wait on the parent if necessary. */
+      if ((pending_follow.kind == TARGET_WAITKIND_VFORKED)
+	  && !pending_follow.fork_event.saw_parent_fork)
+	{
+	  int parent_pid;
+
+	  do
+	    {
+	      if (target_wait_hook)
+		parent_pid = target_wait_hook (-1, &w);
+	      else
+		parent_pid = target_wait (-1, &w);
+	    }
+	  while (parent_pid != inferior_pid);
+	}
+
+
+      /* Assuming the inferior still exists, set these up for next
+	 time, just like we did above if we didn't break out of the
+	 loop.  */
+      prev_pc = read_pc ();
+      prev_func_start = stop_func_start;
+      prev_func_name = stop_func_name;
+    }
+  do_cleanups (old_cleanups);
+}
+
+/* This function returns TRUE if ep is an internal breakpoint
+   set to catch generic shared library (aka dynamically-linked
+   library) events.  (This is *NOT* the same as a catchpoint for a
+   shlib event.  The latter is something a user can set; this is
+   something gdb sets for its own use, and isn't ever shown to a
+   user.) */
+static int
+is_internal_shlib_eventpoint (ep)
+     struct breakpoint *ep;
+{
+  return
+    (ep->type == bp_shlib_event)
+    ;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+   stopped due to a shared library (aka dynamically-linked library)
+   event. */
+static int
+stopped_for_internal_shlib_event (bs)
+     bpstat bs;
+{
+  /* Note that multiple eventpoints may've caused the stop.  Any
+     that are associated with shlib events will be accepted. */
+  for (; bs != NULL; bs = bs->next)
+    {
+      if ((bs->breakpoint_at != NULL)
+	  && is_internal_shlib_eventpoint (bs->breakpoint_at))
+	return 1;
+    }
+
+  /* If we get here, then no candidate was found. */
+  return 0;
+}
+
+/* This function returns TRUE if bs indicates that the inferior
+   stopped due to a shared library (aka dynamically-linked library)
+   event caught by a catchpoint.
+
+   If TRUE, cp_p is set to point to the catchpoint.
+
+   Else, the value of cp_p is undefined. */
+static int
+stopped_for_shlib_catchpoint (bs, cp_p)
+     bpstat bs;
+     struct breakpoint **cp_p;
+{
+  /* Note that multiple eventpoints may've caused the stop.  Any
+     that are associated with shlib events will be accepted. */
+  *cp_p = NULL;
+
+  for (; bs != NULL; bs = bs->next)
+    {
+      if ((bs->breakpoint_at != NULL)
+	  && ep_is_shlib_catchpoint (bs->breakpoint_at))
+	{
+	  *cp_p = bs->breakpoint_at;
+	  return 1;
+	}
+    }
+
+  /* If we get here, then no candidate was found. */
+  return 0;
+}
+
+
+/* Here to return control to GDB when the inferior stops for real.
+   Print appropriate messages, remove breakpoints, give terminal our modes.
+
+   STOP_PRINT_FRAME nonzero means print the executing frame
+   (pc, function, args, file, line number and line text).
+   BREAKPOINTS_FAILED nonzero means stop was due to error
+   attempting to insert breakpoints.  */
+
+void
+normal_stop ()
+{
+
+#ifdef HPUXHPPA
+  /* As with the notification of thread events, we want to delay
+     notifying the user that we've switched thread context until
+     the inferior actually stops.
+
+     (Note that there's no point in saying anything if the inferior
+     has exited!) */
+  if ((switched_from_inferior_pid != inferior_pid) &&
+      target_has_execution)
+    {
+      target_terminal_ours_for_output ();
+      printf_filtered ("[Switched to %s]\n",
+		       target_pid_or_tid_to_str (inferior_pid));
+      switched_from_inferior_pid = inferior_pid;
+    }
+#endif
+
+  /* Make sure that the current_frame's pc is correct.  This
+     is a correction for setting up the frame info before doing
+     DECR_PC_AFTER_BREAK */
+  if (target_has_execution && get_current_frame ())
+    (get_current_frame ())->pc = read_pc ();
+
+  if (breakpoints_failed)
+    {
+      target_terminal_ours_for_output ();
+      print_sys_errmsg ("ptrace", breakpoints_failed);
+      printf_filtered ("Stopped; cannot insert breakpoints.\n\
+The same program may be running in another process.\n");
+    }
+
+  if (target_has_execution && breakpoints_inserted)
+    {
+      if (remove_breakpoints ())
+	{
+	  target_terminal_ours_for_output ();
+	  printf_filtered ("Cannot remove breakpoints because ");
+	  printf_filtered ("program is no longer writable.\n");
+	  printf_filtered ("It might be running in another process.\n");
+	  printf_filtered ("Further execution is probably impossible.\n");
+	}
+    }
+  breakpoints_inserted = 0;
+
+  /* Delete the breakpoint we stopped at, if it wants to be deleted.
+     Delete any breakpoint that is to be deleted at the next stop.  */
+
+  breakpoint_auto_delete (stop_bpstat);
+
+  /* If an auto-display called a function and that got a signal,
+     delete that auto-display to avoid an infinite recursion.  */
+
+  if (stopped_by_random_signal)
+    disable_current_display ();
+
+  /* Don't print a message if in the middle of doing a "step n"
+     operation for n > 1 */
+  if (step_multi && stop_step)
+    goto done;
+
+  target_terminal_ours ();
+
+  /* Did we stop because the user set the stop_on_solib_events
+     variable?  (If so, we report this as a generic, "Stopped due
+     to shlib event" message.) */
+  if (stopped_for_internal_shlib_event (stop_bpstat))
+    {
+      printf_filtered ("Stopped due to shared library event\n");
+    }
+
+  /* Look up the hook_stop and run it if it exists.  */
+
+  if (stop_command && stop_command->hook)
+    {
+      catch_errors (hook_stop_stub, stop_command->hook,
+		    "Error while running hook_stop:\n", RETURN_MASK_ALL);
+    }
+
+  if (!target_has_stack)
+    {
+
+      goto done;
+    }
+
+  /* Select innermost stack frame - i.e., current frame is frame 0,
+     and current location is based on that.
+     Don't do this on return from a stack dummy routine,
+     or if the program has exited. */
+
+  if (!stop_stack_dummy)
+    {
+      select_frame (get_current_frame (), 0);
+
+      /* Print current location without a level number, if
+	 we have changed functions or hit a breakpoint.
+	 Print source line if we have one.
+	 bpstat_print() contains the logic deciding in detail
+	 what to print, based on the event(s) that just occurred. */
+
+      if (stop_print_frame)
+	{
+	  int bpstat_ret;
+	  int source_flag;
+
+	  bpstat_ret = bpstat_print (stop_bpstat);
+	  /* bpstat_print() returned one of:
+             -1: Didn't print anything
+              0: Printed preliminary "Breakpoint n, " message, desires
+                 location tacked on
+              1: Printed something, don't tack on location */
+
+	  if (bpstat_ret == -1)
+	    if (stop_step
+		&& step_frame_address == FRAME_FP (get_current_frame ())
+		&& step_start_function == find_pc_function (stop_pc))
+	      source_flag = -1;	/* finished step, just print source line */
+	    else
+	      source_flag = 1;	/* print location and source line */
+	  else if (bpstat_ret == 0)	/* hit bpt, desire location */
+	    source_flag = 1;	/* print location and source line */
+	  else			/* bpstat_ret == 1, hit bpt, do not desire location */
+	    source_flag = -1;	/* just print source line */
+
+	  /* The behavior of this routine with respect to the source
+	     flag is:
+	     -1: Print only source line
+	     0: Print only location
+	     1: Print location and source line */
+	  show_and_print_stack_frame (selected_frame, -1, source_flag);
+
+	  /* Display the auto-display expressions.  */
+	  do_displays ();
+	}
+    }
+
+  /* Save the function value return registers, if we care.
+     We might be about to restore their previous contents.  */
+  if (proceed_to_finish)
+    read_register_bytes (0, stop_registers, REGISTER_BYTES);
+
+  if (stop_stack_dummy)
+    {
+      /* Pop the empty frame that contains the stack dummy.
+         POP_FRAME ends with a setting of the current frame, so we
+	 can use that next. */
+      POP_FRAME;
+      /* Set stop_pc to what it was before we called the function.
+	 Can't rely on restore_inferior_status because that only gets
+	 called if we don't stop in the called function.  */
+      stop_pc = read_pc ();
+      select_frame (get_current_frame (), 0);
+    }
+
+
+  TUIDO (((TuiOpaqueFuncPtr) tui_vCheckDataValues, selected_frame));
+
+done:
+  annotate_stopped ();
+}
+
+static int
+hook_stop_stub (cmd)
+     PTR cmd;
+{
+  execute_user_command ((struct cmd_list_element *) cmd, 0);
+  return (0);
+}
+
+int 
+signal_stop_state (signo)
+     int signo;
+{
+  return signal_stop[signo];
+}
+
+int 
+signal_print_state (signo)
+     int signo;
+{
+  return signal_print[signo];
+}
+
+int 
+signal_pass_state (signo)
+     int signo;
+{
+  return signal_program[signo];
+}
+
+static void
+sig_print_header ()
+{
+  printf_filtered ("\
+Signal        Stop\tPrint\tPass to program\tDescription\n");
+}
+
+static void
+sig_print_info (oursig)
+     enum target_signal oursig;
+{
+  char *name = target_signal_to_name (oursig);
+  int name_padding = 13 - strlen (name);
+  if (name_padding <= 0)
+    name_padding = 0;
+
+  printf_filtered ("%s", name);
+  printf_filtered ("%*.*s ", name_padding, name_padding,
+		   "                 ");
+  printf_filtered ("%s\t", signal_stop[oursig] ? "Yes" : "No");
+  printf_filtered ("%s\t", signal_print[oursig] ? "Yes" : "No");
+  printf_filtered ("%s\t\t", signal_program[oursig] ? "Yes" : "No");
+  printf_filtered ("%s\n", target_signal_to_string (oursig));
+}
+
+/* Specify how various signals in the inferior should be handled.  */
+
+static void
+handle_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  int digits, wordlen;
+  int sigfirst, signum, siglast;
+  enum target_signal oursig;
+  int allsigs;
+  int nsigs;
+  unsigned char *sigs;
+  struct cleanup *old_chain;
+
+  if (args == NULL)
+    {
+      error_no_arg ("signal to handle");
+    }
+
+  /* Allocate and zero an array of flags for which signals to handle. */
+
+  nsigs = (int) TARGET_SIGNAL_LAST;
+  sigs = (unsigned char *) alloca (nsigs);
+  memset (sigs, 0, nsigs);
+
+  /* Break the command line up into args. */
+
+  argv = buildargv (args);
+  if (argv == NULL)
+    {
+      nomem (0);
+    }
+  old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+
+  /* Walk through the args, looking for signal oursigs, signal names, and
+     actions.  Signal numbers and signal names may be interspersed with
+     actions, with the actions being performed for all signals cumulatively
+     specified.  Signal ranges can be specified as <LOW>-<HIGH>. */
+
+  while (*argv != NULL)
+    {
+      wordlen = strlen (*argv);
+      for (digits = 0; isdigit ((*argv)[digits]); digits++)
+	{;
+	}
+      allsigs = 0;
+      sigfirst = siglast = -1;
+
+      if (wordlen >= 1 && !strncmp (*argv, "all", wordlen))
+	{
+	  /* Apply action to all signals except those used by the
+	     debugger.  Silently skip those. */
+	  allsigs = 1;
+	  sigfirst = 0;
+	  siglast = nsigs - 1;
+	}
+      else if (wordlen >= 1 && !strncmp (*argv, "stop", wordlen))
+	{
+	  SET_SIGS (nsigs, sigs, signal_stop);
+	  SET_SIGS (nsigs, sigs, signal_print);
+	}
+      else if (wordlen >= 1 && !strncmp (*argv, "ignore", wordlen))
+	{
+	  UNSET_SIGS (nsigs, sigs, signal_program);
+	}
+      else if (wordlen >= 2 && !strncmp (*argv, "print", wordlen))
+	{
+	  SET_SIGS (nsigs, sigs, signal_print);
+	}
+      else if (wordlen >= 2 && !strncmp (*argv, "pass", wordlen))
+	{
+	  SET_SIGS (nsigs, sigs, signal_program);
+	}
+      else if (wordlen >= 3 && !strncmp (*argv, "nostop", wordlen))
+	{
+	  UNSET_SIGS (nsigs, sigs, signal_stop);
+	}
+      else if (wordlen >= 3 && !strncmp (*argv, "noignore", wordlen))
+	{
+	  SET_SIGS (nsigs, sigs, signal_program);
+	}
+      else if (wordlen >= 4 && !strncmp (*argv, "noprint", wordlen))
+	{
+	  UNSET_SIGS (nsigs, sigs, signal_print);
+	  UNSET_SIGS (nsigs, sigs, signal_stop);
+	}
+      else if (wordlen >= 4 && !strncmp (*argv, "nopass", wordlen))
+	{
+	  UNSET_SIGS (nsigs, sigs, signal_program);
+	}
+      else if (digits > 0)
+	{
+	  /* It is numeric.  The numeric signal refers to our own
+	     internal signal numbering from target.h, not to host/target
+	     signal  number.  This is a feature; users really should be
+	     using symbolic names anyway, and the common ones like
+	     SIGHUP, SIGINT, SIGALRM, etc. will work right anyway.  */
+
+	  sigfirst = siglast = (int)
+	    target_signal_from_command (atoi (*argv));
+	  if ((*argv)[digits] == '-')
+	    {
+	      siglast = (int)
+		target_signal_from_command (atoi ((*argv) + digits + 1));
+	    }
+	  if (sigfirst > siglast)
+	    {
+	      /* Bet he didn't figure we'd think of this case... */
+	      signum = sigfirst;
+	      sigfirst = siglast;
+	      siglast = signum;
+	    }
+	}
+      else
+	{
+	  oursig = target_signal_from_name (*argv);
+	  if (oursig != TARGET_SIGNAL_UNKNOWN)
+	    {
+	      sigfirst = siglast = (int) oursig;
+	    }
+	  else
+	    {
+	      /* Not a number and not a recognized flag word => complain.  */
+	      error ("Unrecognized or ambiguous flag word: \"%s\".", *argv);
+	    }
+	}
+
+      /* If any signal numbers or symbol names were found, set flags for
+	 which signals to apply actions to. */
+
+      for (signum = sigfirst; signum >= 0 && signum <= siglast; signum++)
+	{
+	  switch ((enum target_signal) signum)
+	    {
+	    case TARGET_SIGNAL_TRAP:
+	    case TARGET_SIGNAL_INT:
+	      if (!allsigs && !sigs[signum])
+		{
+		  if (query ("%s is used by the debugger.\n\
+Are you sure you want to change it? ",
+			     target_signal_to_name
+			     ((enum target_signal) signum)))
+		    {
+		      sigs[signum] = 1;
+		    }
+		  else
+		    {
+		      printf_unfiltered ("Not confirmed, unchanged.\n");
+		      gdb_flush (gdb_stdout);
+		    }
+		}
+	      break;
+	    case TARGET_SIGNAL_0:
+	    case TARGET_SIGNAL_DEFAULT:
+	    case TARGET_SIGNAL_UNKNOWN:
+	      /* Make sure that "all" doesn't print these.  */
+	      break;
+	    default:
+	      sigs[signum] = 1;
+	      break;
+	    }
+	}
+
+      argv++;
+    }
+
+  target_notice_signals (inferior_pid);
+
+  if (from_tty)
+    {
+      /* Show the results.  */
+      sig_print_header ();
+      for (signum = 0; signum < nsigs; signum++)
+	{
+	  if (sigs[signum])
+	    {
+	      sig_print_info (signum);
+	    }
+	}
+    }
+
+  do_cleanups (old_chain);
+}
+
+static void
+xdb_handle_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  struct cleanup *old_chain;
+
+  /* Break the command line up into args. */
+
+  argv = buildargv (args);
+  if (argv == NULL)
+    {
+      nomem (0);
+    }
+  old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+  if (argv[1] != (char *) NULL)
+    {
+      char *argBuf;
+      int bufLen;
+
+      bufLen = strlen (argv[0]) + 20;
+      argBuf = (char *) xmalloc (bufLen);
+      if (argBuf)
+	{
+	  int validFlag = 1;
+	  enum target_signal oursig;
+
+	  oursig = target_signal_from_name (argv[0]);
+	  memset (argBuf, 0, bufLen);
+	  if (strcmp (argv[1], "Q") == 0)
+	    sprintf (argBuf, "%s %s", argv[0], "noprint");
+	  else
+	    {
+	      if (strcmp (argv[1], "s") == 0)
+		{
+		  if (!signal_stop[oursig])
+		    sprintf (argBuf, "%s %s", argv[0], "stop");
+		  else
+		    sprintf (argBuf, "%s %s", argv[0], "nostop");
+		}
+	      else if (strcmp (argv[1], "i") == 0)
+		{
+		  if (!signal_program[oursig])
+		    sprintf (argBuf, "%s %s", argv[0], "pass");
+		  else
+		    sprintf (argBuf, "%s %s", argv[0], "nopass");
+		}
+	      else if (strcmp (argv[1], "r") == 0)
+		{
+		  if (!signal_print[oursig])
+		    sprintf (argBuf, "%s %s", argv[0], "print");
+		  else
+		    sprintf (argBuf, "%s %s", argv[0], "noprint");
+		}
+	      else
+		validFlag = 0;
+	    }
+	  if (validFlag)
+	    handle_command (argBuf, from_tty);
+	  else
+	    printf_filtered ("Invalid signal handling flag.\n");
+	  if (argBuf)
+	    free (argBuf);
+	}
+    }
+  do_cleanups (old_chain);
+}
+
+/* Print current contents of the tables set by the handle command.
+   It is possible we should just be printing signals actually used
+   by the current target (but for things to work right when switching
+   targets, all signals should be in the signal tables).  */
+
+static void
+signals_info (signum_exp, from_tty)
+     char *signum_exp;
+     int from_tty;
+{
+  enum target_signal oursig;
+  sig_print_header ();
+
+  if (signum_exp)
+    {
+      /* First see if this is a symbol name.  */
+      oursig = target_signal_from_name (signum_exp);
+      if (oursig == TARGET_SIGNAL_UNKNOWN)
+	{
+	  /* No, try numeric.  */
+	  oursig =
+	    target_signal_from_command (parse_and_eval_address (signum_exp));
+	}
+      sig_print_info (oursig);
+      return;
+    }
+
+  printf_filtered ("\n");
+  /* These ugly casts brought to you by the native VAX compiler.  */
+  for (oursig = TARGET_SIGNAL_FIRST;
+       (int) oursig < (int) TARGET_SIGNAL_LAST;
+       oursig = (enum target_signal) ((int) oursig + 1))
+    {
+      QUIT;
+
+      if (oursig != TARGET_SIGNAL_UNKNOWN
+	  && oursig != TARGET_SIGNAL_DEFAULT
+	  && oursig != TARGET_SIGNAL_0)
+	sig_print_info (oursig);
+    }
+
+  printf_filtered ("\nUse the \"handle\" command to change these tables.\n");
+}
+
+/* Save all of the information associated with the inferior<==>gdb
+   connection.  INF_STATUS is a pointer to a "struct inferior_status"
+   (defined in inferior.h).  */
+
+void
+save_inferior_status (inf_status, restore_stack_info)
+     struct inferior_status *inf_status;
+     int restore_stack_info;
+{
+  inf_status->stop_signal = stop_signal;
+  inf_status->stop_pc = stop_pc;
+  inf_status->stop_step = stop_step;
+  inf_status->stop_stack_dummy = stop_stack_dummy;
+  inf_status->stopped_by_random_signal = stopped_by_random_signal;
+  inf_status->trap_expected = trap_expected;
+  inf_status->step_range_start = step_range_start;
+  inf_status->step_range_end = step_range_end;
+  inf_status->step_frame_address = step_frame_address;
+  inf_status->step_over_calls = step_over_calls;
+  inf_status->stop_after_trap = stop_after_trap;
+  inf_status->stop_soon_quietly = stop_soon_quietly;
+  /* Save original bpstat chain here; replace it with copy of chain.
+     If caller's caller is walking the chain, they'll be happier if we
+     hand them back the original chain when restore_i_s is called.  */
+  inf_status->stop_bpstat = stop_bpstat;
+  stop_bpstat = bpstat_copy (stop_bpstat);
+  inf_status->breakpoint_proceeded = breakpoint_proceeded;
+  inf_status->restore_stack_info = restore_stack_info;
+  inf_status->proceed_to_finish = proceed_to_finish;
+
+  memcpy (inf_status->stop_registers, stop_registers, REGISTER_BYTES);
+
+  read_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
+  record_selected_frame (&(inf_status->selected_frame_address),
+			 &(inf_status->selected_level));
+  return;
+}
+
+struct restore_selected_frame_args
+{
+  CORE_ADDR frame_address;
+  int level;
+};
+
+static int restore_selected_frame PARAMS ((PTR));
+
+/* Restore the selected frame.  args is really a struct
+   restore_selected_frame_args * (declared as char * for catch_errors)
+   telling us what frame to restore.  Returns 1 for success, or 0 for
+   failure.  An error message will have been printed on error.  */
+
+static int
+restore_selected_frame (args)
+     PTR args;
+{
+  struct restore_selected_frame_args *fr =
+  (struct restore_selected_frame_args *) args;
+  struct frame_info *frame;
+  int level = fr->level;
+
+  frame = find_relative_frame (get_current_frame (), &level);
+
+  /* If inf_status->selected_frame_address is NULL, there was no
+     previously selected frame.  */
+  if (frame == NULL ||
+  /*  FRAME_FP (frame) != fr->frame_address || */
+  /* elz: deleted this check as a quick fix to the problem that
+	 for function called by hand gdb creates no internal frame
+	 structure and the real stack and gdb's idea of stack are
+	 different if nested calls by hands are made.
+
+	 mvs: this worries me.  */
+      level != 0)
+    {
+      warning ("Unable to restore previously selected frame.\n");
+      return 0;
+    }
+
+  select_frame (frame, fr->level);
+
+  return (1);
+}
+
+void
+restore_inferior_status (inf_status)
+     struct inferior_status *inf_status;
+{
+  stop_signal = inf_status->stop_signal;
+  stop_pc = inf_status->stop_pc;
+  stop_step = inf_status->stop_step;
+  stop_stack_dummy = inf_status->stop_stack_dummy;
+  stopped_by_random_signal = inf_status->stopped_by_random_signal;
+  trap_expected = inf_status->trap_expected;
+  step_range_start = inf_status->step_range_start;
+  step_range_end = inf_status->step_range_end;
+  step_frame_address = inf_status->step_frame_address;
+  step_over_calls = inf_status->step_over_calls;
+  stop_after_trap = inf_status->stop_after_trap;
+  stop_soon_quietly = inf_status->stop_soon_quietly;
+  bpstat_clear (&stop_bpstat);
+  stop_bpstat = inf_status->stop_bpstat;
+  breakpoint_proceeded = inf_status->breakpoint_proceeded;
+  proceed_to_finish = inf_status->proceed_to_finish;
+
+  memcpy (stop_registers, inf_status->stop_registers, REGISTER_BYTES);
+
+  /* The inferior can be gone if the user types "print exit(0)"
+     (and perhaps other times).  */
+  if (target_has_execution)
+    write_register_bytes (0, inf_status->registers, REGISTER_BYTES);
+
+  /* The inferior can be gone if the user types "print exit(0)"
+     (and perhaps other times).  */
+
+  /* FIXME: If we are being called after stopping in a function which
+     is called from gdb, we should not be trying to restore the
+     selected frame; it just prints a spurious error message (The
+     message is useful, however, in detecting bugs in gdb (like if gdb
+     clobbers the stack)).  In fact, should we be restoring the
+     inferior status at all in that case?  .  */
+
+  if (target_has_stack && inf_status->restore_stack_info)
+    {
+      struct restore_selected_frame_args fr;
+      fr.level = inf_status->selected_level;
+      fr.frame_address = inf_status->selected_frame_address;
+      /* The point of catch_errors is that if the stack is clobbered,
+	 walking the stack might encounter a garbage pointer and error()
+	 trying to dereference it.  */
+      if (catch_errors (restore_selected_frame, &fr,
+			"Unable to restore previously selected frame:\n",
+			RETURN_MASK_ERROR) == 0)
+	/* Error in restoring the selected frame.  Select the innermost
+	   frame.  */
+
+
+	select_frame (get_current_frame (), 0);
+
+    }
+}
+
+
+
+void
+set_follow_fork_mode_command (arg, from_tty, c)
+     char *arg;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (!STREQ (arg, "parent") &&
+      !STREQ (arg, "child") &&
+      !STREQ (arg, "both") &&
+      !STREQ (arg, "ask"))
+    error ("follow-fork-mode must be one of \"parent\", \"child\", \"both\" or \"ask\".");
+
+  if (follow_fork_mode_string != NULL)
+    free (follow_fork_mode_string);
+  follow_fork_mode_string = savestring (arg, strlen (arg));
+}
+
+
+
+void
+_initialize_infrun ()
+{
+  register int i;
+  register int numsigs;
+  struct cmd_list_element *c;
+
+  add_info ("signals", signals_info,
+	    "What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only.");
+  add_info_alias ("handle", "signals", 0);
+
+  add_com ("handle", class_run, handle_command,
+	   concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+		   "Recognized actions include \"stop\", \"nostop\", \"print\", \"noprint\",\n\
+\"pass\", \"nopass\", \"ignore\", or \"noignore\".\n\
+Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
+Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+  if (xdb_commands)
+    {
+      add_com ("lz", class_info, signals_info,
+	       "What debugger does when program gets various signals.\n\
+Specify a signal as argument to print info on that signal only.");
+      add_com ("z", class_run, xdb_handle_command,
+	       concat ("Specify how to handle a signal.\n\
+Args are signals and actions to apply to those signals.\n\
+Symbolic signals (e.g. SIGSEGV) are recommended but numeric signals\n\
+from 1-15 are allowed for compatibility with old versions of GDB.\n\
+Numeric ranges may be specified with the form LOW-HIGH (e.g. 1-5).\n\
+The special arg \"all\" is recognized to mean all signals except those\n\
+used by the debugger, typically SIGTRAP and SIGINT.\n",
+		       "Recognized actions include \"s\" (toggles between stop and nostop), \n\
+\"r\" (toggles between print and noprint), \"i\" (toggles between pass and \
+nopass), \"Q\" (noprint)\n\
+Stop means reenter debugger if this signal happens (implies print).\n\
+Print means print a message if this signal happens.\n\
+Pass means let program see this signal; otherwise program doesn't know.\n\
+Ignore is a synonym for nopass and noignore is a synonym for pass.\n\
+Pass and Stop may be combined.", NULL));
+    }
+
+  if (!dbx_commands)
+    stop_command = add_cmd ("stop", class_obscure, not_just_help_class_command,
+			    "There is no `stop' command, but you can set a hook on `stop'.\n\
+This allows you to set a list of commands to be run each time execution\n\
+of the program stops.", &cmdlist);
+
+  numsigs = (int) TARGET_SIGNAL_LAST;
+  signal_stop = (unsigned char *)
+    xmalloc (sizeof (signal_stop[0]) * numsigs);
+  signal_print = (unsigned char *)
+    xmalloc (sizeof (signal_print[0]) * numsigs);
+  signal_program = (unsigned char *)
+    xmalloc (sizeof (signal_program[0]) * numsigs);
+  for (i = 0; i < numsigs; i++)
+    {
+      signal_stop[i] = 1;
+      signal_print[i] = 1;
+      signal_program[i] = 1;
+    }
+
+  /* Signals caused by debugger's own actions
+     should not be given to the program afterwards.  */
+  signal_program[TARGET_SIGNAL_TRAP] = 0;
+  signal_program[TARGET_SIGNAL_INT] = 0;
+
+  /* Signals that are not errors should not normally enter the debugger.  */
+  signal_stop[TARGET_SIGNAL_ALRM] = 0;
+  signal_print[TARGET_SIGNAL_ALRM] = 0;
+  signal_stop[TARGET_SIGNAL_VTALRM] = 0;
+  signal_print[TARGET_SIGNAL_VTALRM] = 0;
+  signal_stop[TARGET_SIGNAL_PROF] = 0;
+  signal_print[TARGET_SIGNAL_PROF] = 0;
+  signal_stop[TARGET_SIGNAL_CHLD] = 0;
+  signal_print[TARGET_SIGNAL_CHLD] = 0;
+  signal_stop[TARGET_SIGNAL_IO] = 0;
+  signal_print[TARGET_SIGNAL_IO] = 0;
+  signal_stop[TARGET_SIGNAL_POLL] = 0;
+  signal_print[TARGET_SIGNAL_POLL] = 0;
+  signal_stop[TARGET_SIGNAL_URG] = 0;
+  signal_print[TARGET_SIGNAL_URG] = 0;
+  signal_stop[TARGET_SIGNAL_WINCH] = 0;
+  signal_print[TARGET_SIGNAL_WINCH] = 0;
+
+#ifdef SOLIB_ADD
+  add_show_from_set
+    (add_set_cmd ("stop-on-solib-events", class_support, var_zinteger,
+		  (char *) &stop_on_solib_events,
+		  "Set stopping for shared library events.\n\
+If nonzero, gdb will give control to the user when the dynamic linker\n\
+notifies gdb of shared library events.  The most common event of interest\n\
+to the user would be loading/unloading of a new library.\n",
+		  &setlist),
+     &showlist);
+#endif
+
+  c = add_set_enum_cmd ("follow-fork-mode",
+			class_run,
+			follow_fork_mode_kind_names,
+			(char *) &follow_fork_mode_string,
+/* ??rehrauer:  The "both" option is broken, by what may be a 10.20
+   kernel problem.  It's also not terribly useful without a GUI to
+   help the user drive two debuggers.  So for now, I'm disabling
+   the "both" option.  */
+/*			"Set debugger response to a program call of fork \
+or vfork.\n\
+A fork or vfork creates a new process.  follow-fork-mode can be:\n\
+  parent  - the original process is debugged after a fork\n\
+  child   - the new process is debugged after a fork\n\
+  both    - both the parent and child are debugged after a fork\n\
+  ask     - the debugger will ask for one of the above choices\n\
+For \"both\", another copy of the debugger will be started to follow\n\
+the new child process.  The original debugger will continue to follow\n\
+the original parent process.  To distinguish their prompts, the\n\
+debugger copy's prompt will be changed.\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+*/
+			"Set debugger response to a program call of fork \
+or vfork.\n\
+A fork or vfork creates a new process.  follow-fork-mode can be:\n\
+  parent  - the original process is debugged after a fork\n\
+  child   - the new process is debugged after a fork\n\
+  ask     - the debugger will ask for one of the above choices\n\
+For \"parent\" or \"child\", the unfollowed process will run free.\n\
+By default, the debugger will follow the parent process.",
+			&setlist);
+/*  c->function.sfunc = ;*/
+  add_show_from_set (c, &showlist);
+
+  set_follow_fork_mode_command ("parent", 0, NULL);
+
+  c = add_set_enum_cmd ("scheduler-locking", class_run,
+			scheduler_enums,	/* array of string names */
+			(char *) &scheduler_mode,	/* current mode  */
+			"Set mode for locking scheduler during execution.\n\
+off  == no locking (threads may preempt at any time)\n\
+on   == full locking (no thread except the current thread may run)\n\
+step == scheduler locked during every single-step operation.\n\
+	In this mode, no other thread may run during a step command.\n\
+	Other threads may run while stepping over a function call ('next').",
+			&setlist);
+
+  c->function.sfunc = set_schedlock_func;	/* traps on target vector */
+  add_show_from_set (c, &showlist);
+}
diff --git a/gdb/inftarg.c b/gdb/inftarg.c
new file mode 100644
index 0000000..af5cd3d
--- /dev/null
+++ b/gdb/inftarg.c
@@ -0,0 +1,968 @@
+/* Target-vector operations for controlling Unix child processes, for GDB.
+   Copyright 1990-1996, 1998, 1999 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+## Contains temporary hacks..
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"  /* required by inferior.h */
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "gdb_stat.h"
+#include <signal.h>
+#include <sys/types.h>
+#include <fcntl.h>
+
+#ifdef HAVE_WAIT_H
+# include <wait.h>
+#else
+# ifdef HAVE_SYS_WAIT_H
+#  include <sys/wait.h>
+# endif
+#endif
+
+/* "wait.h" fills in the gaps left by <wait.h> */
+#include "wait.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+extern struct symtab_and_line *
+child_enable_exception_callback PARAMS ((enum exception_event_kind, int));
+
+extern struct exception_event_record *
+child_get_current_exception_event PARAMS ((void));
+
+extern void _initialize_inftarg PARAMS ((void));
+
+static void
+child_prepare_to_store PARAMS ((void));
+
+#ifndef CHILD_WAIT
+static int child_wait PARAMS ((int, struct target_waitstatus *));
+#endif /* CHILD_WAIT */
+
+#if !defined(CHILD_POST_WAIT)
+void
+child_post_wait PARAMS ((int, int));
+#endif
+
+static void child_open PARAMS ((char *, int));
+
+static void
+child_files_info PARAMS ((struct target_ops *));
+
+static void
+child_detach PARAMS ((char *, int));
+
+static void
+child_detach_from_process PARAMS ((int, char *, int, int));
+
+static void
+child_attach PARAMS ((char *, int));
+
+static void
+child_attach_to_process PARAMS ((char *, int, int));
+
+#if !defined(CHILD_POST_ATTACH)
+extern void child_post_attach PARAMS ((int));
+#endif
+
+static void
+child_require_attach PARAMS ((char *, int));
+
+static void
+child_require_detach PARAMS ((int, char *, int));
+
+static void
+ptrace_me PARAMS ((void));
+
+static void 
+ptrace_him PARAMS ((int));
+
+static void 
+child_create_inferior PARAMS ((char *, char *, char **));
+
+static void
+child_mourn_inferior PARAMS ((void));
+
+static int
+child_can_run PARAMS ((void));
+
+static void
+child_stop PARAMS ((void));
+
+#ifndef CHILD_THREAD_ALIVE
+int child_thread_alive PARAMS ((int));
+#endif
+
+static void init_child_ops PARAMS ((void));
+
+extern char **environ;
+
+struct target_ops child_ops;
+
+int child_suppress_run = 0;	/* Non-zero if inftarg should pretend not to
+				   be a runnable target.  Used by targets
+				   that can sit atop inftarg, such as HPUX
+				   thread support.  */
+
+#ifndef CHILD_WAIT
+
+/*##*/
+/* Enable HACK for ttrace work.  In
+ * infttrace.c/require_notification_of_events,
+ * this is set to 0 so that the loop in child_wait
+ * won't loop.
+ */
+int not_same_real_pid = 1;
+/*##*/
+
+
+/* Wait for child to do something.  Return pid of child, or -1 in case
+   of error; store status through argument pointer OURSTATUS.  */
+
+static int
+child_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  int save_errno;
+  int status;
+  char *  execd_pathname;
+  int  exit_status;
+  int  related_pid;
+  int  syscall_id;
+  enum target_waitkind  kind;
+
+  do {
+    set_sigint_trap();	/* Causes SIGINT to be passed on to the
+			   attached process. */
+    set_sigio_trap ();
+
+    pid = ptrace_wait (inferior_pid, &status);
+
+    save_errno = errno;
+
+    clear_sigio_trap ();
+
+    clear_sigint_trap();
+
+    if (pid == -1)
+      {
+	if (save_errno == EINTR)
+	  continue;
+
+	fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
+		 safe_strerror (save_errno));
+
+	/* Claim it exited with unknown signal.  */
+	ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+	ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+        return -1;
+      }
+
+    /* Did it exit?
+     */
+    if (target_has_exited (pid, status, &exit_status))
+      {
+        /* ??rehrauer: For now, ignore this. */
+        continue;
+      }
+
+    if (!target_thread_alive (pid))
+      {
+        ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
+        return pid;
+      }
+      
+    if (target_has_forked (pid, &related_pid)
+	 && ((pid == inferior_pid) || (related_pid == inferior_pid)))
+      {
+        ourstatus->kind = TARGET_WAITKIND_FORKED;
+        ourstatus->value.related_pid = related_pid;
+        return pid;
+      }
+
+    if (target_has_vforked (pid, &related_pid)
+	 && ((pid == inferior_pid) || (related_pid == inferior_pid)))
+      {
+        ourstatus->kind = TARGET_WAITKIND_VFORKED;
+        ourstatus->value.related_pid = related_pid;
+        return pid;
+      }
+
+    if (target_has_execd (pid, &execd_pathname))
+      {
+        /* Are we ignoring initial exec events?  (This is likely because
+           we're in the process of starting up the inferior, and another
+           (older) mechanism handles those.)  If so, we'll report this
+           as a regular stop, not an exec.
+           */
+        if (inferior_ignoring_startup_exec_events)
+          {
+            inferior_ignoring_startup_exec_events--;
+          }
+        else
+          {
+            ourstatus->kind = TARGET_WAITKIND_EXECD;
+            ourstatus->value.execd_pathname = execd_pathname;
+            return pid;
+          }
+      }
+
+    /* All we must do with these is communicate their occurrence
+       to wait_for_inferior...
+       */
+    if (target_has_syscall_event (pid, &kind, &syscall_id))
+      {
+        ourstatus->kind = kind;
+        ourstatus->value.syscall_id = syscall_id;
+        return pid;
+      }
+
+/*##  } while (pid != inferior_pid); ##*/ /* Some other child died or stopped */
+/* hack for thread testing */
+      } while( (pid != inferior_pid) && not_same_real_pid );
+/*##*/
+
+  store_waitstatus (ourstatus, status);
+  return pid;
+}
+#endif /* CHILD_WAIT */
+
+#if !defined(CHILD_POST_WAIT)
+void
+child_post_wait (pid, wait_status)
+  int  pid;
+  int  wait_status;
+{
+  /* This version of Unix doesn't require a meaningful "post wait"
+     operation.
+     */
+}
+#endif
+ 
+
+#ifndef CHILD_THREAD_ALIVE
+
+/* Check to see if the given thread is alive.
+
+   FIXME: Is kill() ever the right way to do this?  I doubt it, but
+   for now we're going to try and be compatable with the old thread
+   code.  */
+int
+child_thread_alive (pid)
+     int pid;
+{
+  return (kill (pid, 0) != -1);
+}
+
+#endif
+
+static void
+child_attach_to_process (args, from_tty, after_fork)
+  char *  args;
+  int  from_tty;
+  int  after_fork;
+{
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+#ifndef ATTACH_DETACH
+  error ("Can't attach to a process on this machine.");
+#else
+  {
+    char *exec_file;
+    int pid;
+    char *dummy;
+
+    dummy = args;
+    pid = strtol (args, &dummy, 0);
+    /* Some targets don't set errno on errors, grrr! */
+    if ((pid == 0) && (args == dummy))
+      error ("Illegal process-id: %s\n", args);
+
+    if (pid == getpid())		/* Trying to masturbate? */
+      error ("I refuse to debug myself!");
+
+    if (from_tty)
+      {
+	exec_file = (char *) get_exec_file (0);
+
+	if (after_fork)
+	  printf_unfiltered ("Attaching after fork to %s\n", 
+		  target_pid_to_str (pid));
+	else if (exec_file)
+	  printf_unfiltered ("Attaching to program: %s, %s\n", exec_file,
+                  target_pid_to_str (pid));
+        else
+          printf_unfiltered ("Attaching to %s\n", target_pid_to_str (pid));
+
+	gdb_flush (gdb_stdout);
+      }
+
+    if (!after_fork)
+      attach (pid);
+    else
+      REQUIRE_ATTACH (pid);
+
+    inferior_pid = pid;
+    push_target (&child_ops);
+  }
+#endif  /* ATTACH_DETACH */
+}
+
+
+/* Attach to process PID, then initialize for debugging it.  */
+
+static void
+child_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  child_attach_to_process (args, from_tty, 0);
+}
+
+#if !defined(CHILD_POST_ATTACH)
+void
+child_post_attach (pid)
+  int  pid;
+{
+  /* This version of Unix doesn't require a meaningful "post attach"
+     operation by a debugger.  */
+}
+#endif
+
+static void
+child_require_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  child_attach_to_process (args, from_tty, 1);
+} 
+
+static void
+child_detach_from_process (pid, args, from_tty, after_fork)
+  int  pid;
+  char *  args;
+  int  from_tty;
+  int  after_fork;
+{
+#ifdef ATTACH_DETACH
+  {
+    int siggnal = 0;
+
+    if (from_tty)
+      {
+	char *exec_file = get_exec_file (0);
+	if (exec_file == 0)
+	  exec_file = "";
+        if (after_fork)
+          printf_unfiltered ("Detaching after fork from %s\n",
+                             target_pid_to_str (pid));
+        else
+	  printf_unfiltered ("Detaching from program: %s, %s\n", exec_file,
+		             target_pid_to_str (pid));
+	gdb_flush (gdb_stdout);
+      }
+    if (args)
+      siggnal = atoi (args);
+
+    if (!after_fork)
+      detach (siggnal);
+    else
+      REQUIRE_DETACH (pid, siggnal);
+  }
+#else
+  error ("This version of Unix does not support detaching a process.");
+#endif
+}
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via the normal ptrace (PTRACE_TRACEME).  */
+
+static void
+child_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  child_detach_from_process (inferior_pid, args, from_tty, 0);
+  inferior_pid = 0;
+  unpush_target (&child_ops);
+}
+
+static void
+child_require_detach (pid, args, from_tty)
+  int  pid;
+  char *  args;
+  int  from_tty;
+{
+  child_detach_from_process (pid, args, from_tty, 1);
+}
+
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+child_prepare_to_store ()
+{
+#ifdef CHILD_PREPARE_TO_STORE
+  CHILD_PREPARE_TO_STORE ();
+#endif
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+child_files_info (ignore)
+     struct target_ops *ignore;
+{
+  printf_unfiltered ("\tUsing the running image of %s %s.\n",
+	  attach_flag? "attached": "child", target_pid_to_str (inferior_pid));
+}
+
+/* ARGSUSED */
+static void
+child_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Unix child process.");
+}
+
+/* Stub function which causes the inferior that runs it, to be ptrace-able
+   by its parent process.  */
+
+static void
+ptrace_me ()
+{
+  /* "Trace me, Dr. Memory!" */
+  call_ptrace (0, 0, (PTRACE_ARG3_TYPE) 0, 0);
+}
+
+/* Stub function which causes the GDB that runs it, to start ptrace-ing
+   the child process.  */
+
+static void 
+ptrace_him (pid)
+     int pid;
+{
+  push_target (&child_ops);
+
+  /* On some targets, there must be some explicit synchronization
+     between the parent and child processes after the debugger
+     forks, and before the child execs the debuggee program.  This
+     call basically gives permission for the child to exec.
+     */
+
+  target_acknowledge_created_inferior (pid);
+
+  /* START_INFERIOR_TRAPS_EXPECTED is defined in inferior.h,
+   * and will be 1 or 2 depending on whether we're starting
+   * without or with a shell.
+   */
+  startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
+
+  /* On some targets, there must be some explicit actions taken after
+     the inferior has been started up.
+     */
+  target_post_startup_inferior (pid);
+}
+
+/* Start an inferior Unix child process and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().  */
+
+static void
+child_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+
+#ifdef HPUXHPPA
+  char *tryname;
+  char *shell_file;
+  char *p;
+  char *p1;
+  char *path = getenv ("PATH");
+  int len;
+  struct stat statbuf;
+
+  /* On HP-UX, we have a possible bad interaction between
+   * the start-up-with-shell code and our catch-fork/catch-exec
+   * logic. To avoid the bad interaction, we start up with the
+   * C shell ("csh") and pass it the "-f" flag (fast start-up,
+   * don't run .cshrc code).
+   * See further comments in inferior.h toward the bottom
+   * (STARTUP_WITH_SHELL flag) and in fork-child.c
+   */
+
+  /* Rather than passing in a hard-wired path like "/bin/csh",
+   * we look down the PATH to find csh. I took this code from
+   * procfs.c, which is the file in the Sun-specific part of GDB
+   * analogous to inftarg.c. See procfs.c for more detailed 
+   * comments. - RT
+   */
+  shell_file = "csh";
+  if (path == NULL)
+    path = "/bin:/usr/bin";
+  tryname = alloca (strlen (path) + strlen (shell_file) + 2);
+  for (p = path; p != NULL; p = p1 ? p1 + 1: NULL)
+    {
+    p1 = strchr (p, ':');
+    if (p1 != NULL)
+      len = p1 - p;
+    else
+      len = strlen (p);
+    strncpy (tryname, p, len);
+    tryname[len] = '\0';
+    strcat (tryname, "/");
+    strcat (tryname, shell_file);
+    if (access (tryname, X_OK) < 0)
+      continue;
+    if (stat (tryname, &statbuf) < 0)
+      continue;
+    if (!S_ISREG (statbuf.st_mode))
+      /* We certainly need to reject directories.  I'm not quite
+         as sure about FIFOs, sockets, etc., but I kind of doubt
+         that people want to exec() these things.  */
+      continue;
+      break;
+    }
+  if (p == NULL)
+    /* Not found. I replaced the error() which existed in procfs.c
+     * with simply passing in NULL and hoping fork_inferior() 
+     * can deal with it. - RT
+     */ 
+    /* error ("Can't find shell %s in PATH", shell_file); */
+    shell_file = NULL;
+  else
+    shell_file = tryname;
+
+  fork_inferior (exec_file, allargs, env, ptrace_me, ptrace_him, pre_fork_inferior, NULL);
+#else
+ fork_inferior (exec_file, allargs, env, ptrace_me, ptrace_him, NULL, NULL);
+#endif
+  /* We are at the first instruction we care about.  */
+  /* Pedal to the metal... */
+  proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
+}
+
+#if !defined(CHILD_POST_STARTUP_INFERIOR)
+void
+child_post_startup_inferior (pid)
+  int  pid;
+{
+  /* This version of Unix doesn't require a meaningful "post startup inferior"
+     operation by a debugger.
+     */
+}
+#endif
+
+#if !defined(CHILD_ACKNOWLEDGE_CREATED_INFERIOR)
+void
+child_acknowledge_created_inferior (pid)
+  int  pid;
+{
+  /* This version of Unix doesn't require a meaningful "acknowledge created inferior"
+     operation by a debugger.
+     */
+}
+#endif
+
+
+void
+child_clone_and_follow_inferior (child_pid, followed_child)
+  int  child_pid;
+  int  *followed_child;
+{
+  clone_and_follow_inferior (child_pid, followed_child);
+
+  /* Don't resume CHILD_PID; it's stopped where it ought to be, until
+     the decision gets made elsewhere how to continue it.
+     */
+}
+
+
+#if !defined(CHILD_POST_FOLLOW_INFERIOR_BY_CLONE)
+void
+child_post_follow_inferior_by_clone ()
+{
+  /* This version of Unix doesn't require a meaningful "post follow inferior"
+     operation by a clone debugger.
+     */
+}
+#endif
+
+#if !defined(CHILD_INSERT_FORK_CATCHPOINT)
+int
+child_insert_fork_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of fork events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_REMOVE_FORK_CATCHPOINT)
+int
+child_remove_fork_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of fork events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_INSERT_VFORK_CATCHPOINT)
+int
+child_insert_vfork_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of vfork events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_REMOVE_VFORK_CATCHPOINT)
+int
+child_remove_vfork_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of vfork events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_HAS_FORKED)
+int
+child_has_forked (pid, child_pid)
+     int pid;
+     int *child_pid;
+{
+  /* This version of Unix doesn't support notification of fork events.  */
+  return 0;
+}
+#endif
+
+
+#if !defined(CHILD_HAS_VFORKED)
+int
+child_has_vforked (pid, child_pid)
+  int  pid;
+  int *  child_pid;
+{
+  /* This version of Unix doesn't support notification of vfork events.
+     */
+  return 0;
+}
+#endif
+
+
+#if !defined(CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC)
+int
+child_can_follow_vfork_prior_to_exec ()
+{
+  /* This version of Unix doesn't support notification of vfork events.
+     However, if it did, it probably wouldn't allow vforks to be followed
+     before the following exec.
+     */
+  return 0;
+}
+#endif
+
+
+#if !defined(CHILD_POST_FOLLOW_VFORK)
+void
+child_post_follow_vfork (parent_pid, followed_parent, child_pid, followed_child)
+  int  parent_pid;
+  int  followed_parent;
+  int  child_pid;
+  int  followed_child;
+{
+  /* This version of Unix doesn't require a meaningful "post follow vfork"
+     operation by a clone debugger.
+     */
+}
+#endif
+
+#if !defined(CHILD_INSERT_EXEC_CATCHPOINT)
+int
+child_insert_exec_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of exec events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_REMOVE_EXEC_CATCHPOINT)
+int
+child_remove_exec_catchpoint (pid)
+     int pid;
+{
+  /* This version of Unix doesn't support notification of exec events.  */
+  return 0;
+}
+#endif
+
+#if !defined(CHILD_HAS_EXECD)
+int
+child_has_execd (pid, execd_pathname)
+  int  pid;
+  char **  execd_pathname;
+{
+  /* This version of Unix doesn't support notification of exec events.
+     */
+  return 0;
+}
+#endif
+
+
+#if !defined(CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL)
+int
+child_reported_exec_events_per_exec_call ()
+{
+  /* This version of Unix doesn't support notification of exec events.
+     */
+  return 1;
+}
+#endif
+
+
+#if !defined(CHILD_HAS_SYSCALL_EVENT)
+int
+child_has_syscall_event (pid, kind, syscall_id)
+  int  pid;
+  enum target_waitkind *  kind;
+  int *  syscall_id;
+{
+  /* This version of Unix doesn't support notification of syscall events.
+     */
+  return 0;
+}
+#endif
+
+
+#if !defined(CHILD_HAS_EXITED)
+int
+child_has_exited (pid, wait_status, exit_status)
+  int  pid;
+  int  wait_status;
+  int *  exit_status;
+{
+  if (WIFEXITED (wait_status))
+    {
+      *exit_status = WEXITSTATUS (wait_status);
+      return 1;
+    }
+
+  if (WIFSIGNALED (wait_status))
+    {
+      *exit_status = 0;  /* ?? Don't know what else to say here. */
+      return 1;
+    }
+
+  /* ?? Do we really need to consult the event state, too?  Assume the
+   wait_state alone suffices.
+   */
+  return 0;
+}
+#endif
+
+
+static void
+child_mourn_inferior ()
+{
+  /* FIXME: Should be in a header file */
+  extern void proc_remove_foreign PARAMS ((int));
+
+  unpush_target (&child_ops);
+  proc_remove_foreign (inferior_pid);
+  generic_mourn_inferior ();
+}
+
+static int
+child_can_run ()
+{
+  /* This variable is controlled by modules that sit atop inftarg that may layer
+     their own process structure atop that provided here.  hpux-thread.c does
+     this because of the Hpux user-mode level thread model.  */
+
+  return !child_suppress_run;
+}
+
+/* Send a SIGINT to the process group.  This acts just like the user typed a
+   ^C on the controlling terminal.
+
+   XXX - This may not be correct for all systems.  Some may want to use
+   killpg() instead of kill (-pgrp). */
+
+static void
+child_stop ()
+{
+  extern pid_t inferior_process_group;
+
+  kill (-inferior_process_group, SIGINT);
+}
+
+#if !defined(CHILD_ENABLE_EXCEPTION_CALLBACK)
+struct symtab_and_line *
+child_enable_exception_callback (kind, enable)
+  enum exception_event_kind kind;
+  int enable;
+{
+  return (struct symtab_and_line *) NULL;
+}
+#endif
+
+#if !defined(CHILD_GET_CURRENT_EXCEPTION_EVENT)
+struct exception_event_record *
+child_get_current_exception_event ()
+{
+  return (struct exception_event_record *) NULL;
+}
+#endif
+
+
+#if !defined(CHILD_PID_TO_EXEC_FILE)
+char *
+child_pid_to_exec_file (pid)
+  int  pid;
+{
+  /* This version of Unix doesn't support translation of a process ID
+     to the filename of the executable file.
+     */
+  return NULL;
+}
+#endif
+
+char *
+child_core_file_to_sym_file (core)
+  char *  core;
+{
+  /* The target stratum for a running executable need not support
+     this operation.
+     */
+  return NULL;
+}
+
+
+
+static void
+init_child_ops ()
+{
+  child_ops.to_shortname = "child";
+  child_ops.to_longname = "Unix child process";
+  child_ops.to_doc = "Unix child process (started by the \"run\" command).";
+  child_ops.to_open = child_open;
+  child_ops.to_attach = child_attach;
+  child_ops.to_post_attach = child_post_attach;
+  child_ops.to_require_attach = child_require_attach;
+  child_ops.to_detach = child_detach;
+  child_ops.to_require_detach = child_require_detach;
+  child_ops.to_resume = child_resume;
+  child_ops.to_wait = child_wait;
+  child_ops.to_post_wait = child_post_wait;
+  child_ops.to_fetch_registers = fetch_inferior_registers;
+  child_ops.to_store_registers = store_inferior_registers;
+  child_ops.to_prepare_to_store = child_prepare_to_store;
+  child_ops.to_xfer_memory = child_xfer_memory;
+  child_ops.to_files_info = child_files_info;
+  child_ops.to_insert_breakpoint = memory_insert_breakpoint;
+  child_ops.to_remove_breakpoint = memory_remove_breakpoint;
+  child_ops.to_terminal_init = terminal_init_inferior;
+  child_ops.to_terminal_inferior = terminal_inferior;
+  child_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+  child_ops.to_terminal_ours = terminal_ours;
+  child_ops.to_terminal_info = child_terminal_info;
+  child_ops.to_kill = kill_inferior;
+  child_ops.to_create_inferior = child_create_inferior;
+  child_ops.to_post_startup_inferior = child_post_startup_inferior;
+  child_ops.to_acknowledge_created_inferior = child_acknowledge_created_inferior;
+  child_ops.to_clone_and_follow_inferior = child_clone_and_follow_inferior;
+  child_ops.to_post_follow_inferior_by_clone = child_post_follow_inferior_by_clone;
+  child_ops.to_insert_fork_catchpoint = child_insert_fork_catchpoint;
+  child_ops.to_remove_fork_catchpoint = child_remove_fork_catchpoint;
+  child_ops.to_insert_vfork_catchpoint = child_insert_vfork_catchpoint;
+  child_ops.to_remove_vfork_catchpoint = child_remove_vfork_catchpoint;
+  child_ops.to_has_forked = child_has_forked;
+  child_ops.to_has_vforked = child_has_vforked;
+  child_ops.to_can_follow_vfork_prior_to_exec = child_can_follow_vfork_prior_to_exec;
+  child_ops.to_post_follow_vfork = child_post_follow_vfork;
+  child_ops.to_insert_exec_catchpoint = child_insert_exec_catchpoint;
+  child_ops.to_remove_exec_catchpoint = child_remove_exec_catchpoint;
+  child_ops.to_has_execd = child_has_execd;
+  child_ops.to_reported_exec_events_per_exec_call = child_reported_exec_events_per_exec_call;
+  child_ops.to_has_syscall_event = child_has_syscall_event;
+  child_ops.to_has_exited = child_has_exited;
+  child_ops.to_mourn_inferior = child_mourn_inferior;
+  child_ops.to_can_run = child_can_run;
+  child_ops.to_thread_alive = child_thread_alive;
+  child_ops.to_stop = child_stop;
+  child_ops.to_enable_exception_callback = child_enable_exception_callback;
+  child_ops.to_get_current_exception_event = child_get_current_exception_event;
+  child_ops.to_pid_to_exec_file = child_pid_to_exec_file;
+  child_ops.to_core_file_to_sym_file = child_core_file_to_sym_file;
+  child_ops.to_stratum = process_stratum;
+  child_ops.to_has_all_memory = 1;
+  child_ops.to_has_memory = 1;
+  child_ops.to_has_stack = 1;
+  child_ops.to_has_registers = 1;
+  child_ops.to_has_execution = 1;
+  child_ops.to_magic = OPS_MAGIC;
+}
+
+void
+_initialize_inftarg ()
+{
+#ifdef HAVE_OPTIONAL_PROC_FS
+  char procname[32];
+  int fd;
+
+  /* If we have an optional /proc filesystem (e.g. under OSF/1),
+     don't add ptrace support if we can access the running GDB via /proc.  */
+#ifndef PROC_NAME_FMT
+#define PROC_NAME_FMT "/proc/%05d"
+#endif
+  sprintf (procname, PROC_NAME_FMT, getpid ());
+  if ((fd = open (procname, O_RDONLY)) >= 0)
+    {
+      close (fd);
+      return;
+    }
+#endif
+
+  init_child_ops ();
+  add_target (&child_ops);
+}
diff --git a/gdb/infttrace.c b/gdb/infttrace.c
new file mode 100644
index 0000000..61723df
--- /dev/null
+++ b/gdb/infttrace.c
@@ -0,0 +1,5674 @@
+/* Low level Unix child interface to ttrace, for GDB when running under HP-UX.
+   Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdb_string.h"
+#include "wait.h"
+#include "command.h"
+
+/* Some hackery to work around a use of the #define name NO_FLAGS
+ * in both gdb and HPUX (bfd.h and /usr/include/machine/vmparam.h).
+ */
+#ifdef  NO_FLAGS
+#define INFTTRACE_TEMP_HACK NO_FLAGS
+#undef  NO_FLAGS
+#endif
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+
+#include <sys/ttrace.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <sys/mman.h>
+
+#ifndef NO_PTRACE_H
+#ifdef PTRACE_IN_WRONG_PLACE
+#include <ptrace.h>
+#else
+#include <sys/ptrace.h>
+#endif
+#endif /* NO_PTRACE_H */
+
+/* Second half of the hackery above.  Non-ANSI C, so
+ * we can't use "#error", alas.
+ */
+#ifdef NO_FLAGS
+#if (NO_FLAGS != INFTTRACE_TEMP_HACK )
+  /* #error "Hackery to remove warning didn't work right" */
+#else
+  /* Ok, new def'n of NO_FLAGS is same as old one; no action needed. */
+#endif
+#else
+  /* #error "Didn't get expected re-definition of NO_FLAGS" */
+#define NO_FLAGS INFTTRACE_TEMP_HACK
+#endif
+
+#if !defined (PT_SETTRC)
+#define PT_SETTRC	0	/* Make process traceable by parent */
+#endif
+#if !defined (PT_READ_I)
+#define PT_READ_I	1	/* Read word from text space */
+#endif
+#if !defined (PT_READ_D)
+#define	PT_READ_D	2	/* Read word from data space */
+#endif
+#if !defined (PT_READ_U)
+#define PT_READ_U	3	/* Read word from kernel user struct */
+#endif
+#if !defined (PT_WRITE_I)
+#define PT_WRITE_I	4	/* Write word to text space */
+#endif
+#if !defined (PT_WRITE_D)
+#define PT_WRITE_D	5	/* Write word to data space */
+#endif
+#if !defined (PT_WRITE_U)
+#define PT_WRITE_U	6	/* Write word to kernel user struct */
+#endif
+#if !defined (PT_CONTINUE)
+#define PT_CONTINUE	7	/* Continue after signal */
+#endif
+#if !defined (PT_STEP)
+#define PT_STEP		9	/* Set flag for single stepping */
+#endif
+#if !defined (PT_KILL)
+#define PT_KILL		8	/* Send child a SIGKILL signal */
+#endif
+
+#ifndef PT_ATTACH
+#define PT_ATTACH PTRACE_ATTACH
+#endif
+#ifndef PT_DETACH
+#define PT_DETACH PTRACE_DETACH
+#endif
+
+#include "gdbcore.h"
+#ifndef	NO_SYS_FILE
+#include <sys/file.h>
+#endif
+
+/* This semaphore is used to coordinate the child and parent processes
+   after a fork(), and before an exec() by the child.  See parent_attach_all
+   for details.
+   */
+typedef struct {
+    int  parent_channel[2];  /* Parent "talks" to [1], child "listens" to [0] */
+    int  child_channel[2];   /* Child "talks" to [1], parent "listens" to [0] */
+} startup_semaphore_t;
+
+#define SEM_TALK (1)
+#define SEM_LISTEN (0)
+
+static startup_semaphore_t  startup_semaphore;
+
+/* See can_touch_threads_of_process for details. */
+static int  vforking_child_pid = 0;
+static int  vfork_in_flight = 0;
+
+/* To support PREPARE_TO_PROCEED (hppa_prepare_to_proceed).
+ */
+static pid_t old_gdb_pid  = 0;
+static pid_t reported_pid = 0;
+static int reported_bpt = 0;
+
+/* 1 if ok as results of a ttrace or ttrace_wait call, 0 otherwise.
+ */
+#define TT_OK( _status, _errno ) \
+    (((_status) == 1) && ((_errno) == 0))
+
+#define TTRACE_ARG_TYPE uint64_t
+
+/* When supplied as the "addr" operand, ttrace interprets this
+   to mean, "from the current address".
+   */
+#define TT_USE_CURRENT_PC ((TTRACE_ARG_TYPE) TT_NOPC)
+
+/* When supplied as the "addr", "data" or "addr2" operand for most
+   requests, ttrace interprets this to mean, "pay no heed to this
+   argument".
+   */
+#define TT_NIL ((TTRACE_ARG_TYPE) TT_NULLARG)
+
+/* This is capable of holding the value of a 32-bit register.  The
+   value is always left-aligned in the buffer; i.e., [0] contains
+   the most-significant byte of the register's value, and [sizeof(reg)]
+   contains the least-significant value.
+
+   ??rehrauer: Yes, this assumes that an int is 32-bits on HP-UX, and
+   that registers are 32-bits on HP-UX.  The latter assumption changes
+   with PA2.0.
+   */
+typedef int  register_value_t;
+
+/********************************************************************
+
+                 How this works:
+
+   1.  Thread numbers
+
+   The rest of GDB sees threads as being things with different
+   "pid" (process id) values.  See "thread.c" for details.  The
+   separate threads will be seen and reacted to if infttrace passes
+   back different pid values (for _events_).  See wait_for_inferior
+   in inftarg.c.
+
+   So infttrace is going to use thread ids externally, pretending
+   they are process ids, and keep track internally so that it can
+   use the real process id (and thread id) when calling ttrace.
+
+   The data structure that supports this is a linked list of the
+   current threads.  Since at some date infttrace will have to
+   deal with multiple processes, each list element records its
+   corresponding pid, rather than having a single global.
+
+   Note that the list is only approximately current; that's ok, as
+   it's up to date when we need it (we hope!).  Also, it can contain
+   dead threads, as there's no harm if it does.
+
+   The approach taken here is to bury the translation from external
+   to internal inside "call_ttrace" and a few other places.
+
+   There are some wrinkles:
+
+   o  When GDB forks itself to create the debug target process,
+      there's only a pid of 0 around in the child, so the
+      TT_PROC_SETTRC operation uses a more direct call to ttrace;
+      Similiarly, the initial setting of the event mask happens
+      early as  well, and so is also special-cased, and an attach
+      uses a real pid;
+
+   o  We define an unthreaded application as having a "pseudo"
+      thread;
+
+   o  To keep from confusing the rest of GDB, we don't switch
+      the PID for the pseudo thread to a TID.  A table will help:
+
+      Rest of GDB sees these PIDs:     pid   tid1  tid2  tid3 ...
+                                        
+      Our thread list stores:          pid   pid   pid   pid  ...
+                                       tid0  tid1  tid2  tid3
+      
+      Ttrace sees these TIDS:          tid0  tid1  tid2  tid3 ...
+
+      Both pid and tid0 will map to tid0, as there are infttrace.c-internal
+      calls to ttrace using tid0.
+
+   2. Step and Continue
+
+   Since we're implementing the "stop the world" model, sub-model
+   "other threads run during step", we have some stuff to do:
+
+   o  User steps require continuing all threads other than the
+      one the user is stepping;
+
+   o  Internal debugger steps (such as over a breakpoint or watchpoint,
+      but not out of a library load thunk) require stepping only
+      the selected thread; this means that we have to report the
+      step finish on that thread, which can lead to complications;
+
+   o  When a thread is created, it is created running, rather
+      than stopped--so we have to stop it.
+
+   The OS doesn't guarantee the stopped thread list will be stable,
+   no does it guarantee where on the stopped thread list a thread
+   that is single-stepped will wind up: it's possible that it will
+   be off the list for a while, it's possible the step will complete
+   and it will be re-posted to the end...
+
+   This means we have to scan the stopped thread list, build up
+   a work-list, and then run down the work list; we can't do the
+   step/continue during the scan.
+
+   3. Buffering events
+
+   Then there's the issue of waiting for an event.  We do this by
+   noticing how many events are reported at the end of each wait.
+   From then on, we "fake" all resumes and steps, returning instantly,
+   and don't do another wait.  Once all pending events are reported,
+   we can really resume again.
+
+   To keep this hidden, all the routines which know about tids and
+   pids or real events and simulated ones are static (file-local).
+
+   This code can make lots of calls to ttrace, in particular it
+   can spin down the list of thread states more than once.  If this
+   becomes a performance hit, the spin could be done once and the
+   various "tsp" blocks saved, keeping all later spins in this
+   process.
+
+   The O/S doesn't promise to keep the list straight, and so we must
+   re-scan a lot.  By observation, it looks like a single-step/wait
+   puts the stepped thread at the end of the list but doesn't change
+   it otherwise.
+
+****************************************************************
+*/
+
+/* Uncomment these to turn on various debugging output */
+/* #define THREAD_DEBUG */
+/* #define WAIT_BUFFER_DEBUG */
+/* #define PARANOIA */
+
+
+#define INFTTRACE_ALL_THREADS (-1)
+#define INFTTRACE_STEP        (1)
+#define INFTTRACE_CONTINUE    (0)
+
+/* FIX: this is used in inftarg.c/child_wait, in a hack.
+ */
+extern int not_same_real_pid;
+
+/* This is used to count buffered events.
+ */
+static unsigned int more_events_left = 0;
+
+/* Process state.
+ */
+typedef enum process_state_enum {
+    STOPPED,
+    FAKE_STEPPING,
+    FAKE_CONTINUE,   /* For later use */
+    RUNNING,
+    FORKING,
+    VFORKING
+} process_state_t;
+
+static process_state_t process_state = STOPPED;
+
+/* User-specified stepping modality.
+ */
+typedef enum stepping_mode_enum {
+    DO_DEFAULT,  /* ...which is a continue! */
+    DO_STEP,
+    DO_CONTINUE
+} stepping_mode_t;
+ 
+/* Action to take on an attach, depends on
+ * what kind (user command, fork, vfork).
+ *
+ * At the moment, this is either:
+ *
+ * o  continue with a SIGTRAP signal, or
+ *
+ * o  leave stopped.
+ */
+typedef enum attach_continue_enum {
+   DO_ATTACH_CONTINUE,
+   DONT_ATTACH_CONTINUE
+} attach_continue_t;
+
+/* This flag is true if we are doing a step-over-bpt
+ * with buffered events.  We will have to be sure to
+ * report the right thread, as otherwise the spaghetti
+ * code in "infrun.c/wait_for_inferior" will get
+ * confused.
+ */
+static int doing_fake_step  = 0;
+static lwpid_t  fake_step_tid    = 0;
+
+
+/****************************************************
+ * Thread information structure routines and types. *
+ ****************************************************
+ */
+typedef 
+struct thread_info_struct
+{
+    int			am_pseudo;      /* This is a pseudo-thread for the process. */
+    int                 pid;            /* Process ID */
+    lwpid_t             tid;            /* Thread  ID */
+    int			handled;        /* 1 if a buffered event was handled. */
+    int			seen;           /* 1 if this thread was seen on a traverse. */
+    int			terminated;     /* 1 if thread has terminated. */
+    int			have_signal;    /* 1 if signal to be sent */
+    enum target_signal  signal_value;   /* Signal to send */
+    int			have_start;     /* 1 if alternate starting address */
+    stepping_mode_t     stepping_mode;  /* Whether to step or continue */
+    CORE_ADDR           start;          /* Where to start */
+    int			have_state;     /* 1 if the event state has been set */
+    ttstate_t           last_stop_state;/* The most recently-waited event for this thread. */
+    struct thread_info_struct
+                       *next;           /* All threads are linked via this field. */
+    struct thread_info_struct
+                       *next_pseudo;    /* All pseudo-threads are linked via this field. */
+} thread_info;
+
+typedef
+struct thread_info_header_struct
+{
+    int          count;
+    thread_info *head;
+    thread_info *head_pseudo;
+    
+} thread_info_header;
+
+static thread_info_header thread_head     = { 0, NULL, NULL };
+static thread_info_header deleted_threads = { 0, NULL, NULL };
+
+static saved_real_pid = 0;
+
+
+/*************************************************
+ *          Debugging support functions          *
+ *************************************************
+ */
+CORE_ADDR
+get_raw_pc( ttid )
+    lwpid_t ttid;
+{
+    unsigned long pc_val;
+    int      offset;
+    int      res;
+ 
+    offset = register_addr( PC_REGNUM, U_REGS_OFFSET );
+    res    = read_from_register_save_state(
+                       ttid,
+                       (TTRACE_ARG_TYPE) offset,
+                       (char *) &pc_val,
+                       sizeof( pc_val ));
+    if( res <= 0 ) {
+        return (CORE_ADDR) pc_val;
+    }
+    else {
+        return (CORE_ADDR) 0;
+    }
+}                   
+
+static char *
+get_printable_name_of_stepping_mode( mode )
+    stepping_mode_t mode;
+{
+  switch( mode ) {
+    case DO_DEFAULT:  return "DO_DEFAULT";
+    case DO_STEP:     return "DO_STEP";
+    case DO_CONTINUE: return "DO_CONTINUE";
+    default:          return "?unknown mode?";
+  }
+}
+
+/* This function returns a pointer to a string describing the
+ * ttrace event being reported.
+ */
+char *
+get_printable_name_of_ttrace_event (event)
+  ttevents_t event;
+{
+  /* This enumeration is "gappy", so don't use a table. */
+  switch (event) {
+
+    case TTEVT_NONE:
+       return "TTEVT_NONE";
+    case TTEVT_SIGNAL:
+       return "TTEVT_SIGNAL";
+    case TTEVT_FORK:
+       return "TTEVT_FORK";
+    case TTEVT_EXEC:
+       return "TTEVT_EXEC";
+    case TTEVT_EXIT:
+       return "TTEVT_EXIT";
+    case TTEVT_VFORK:
+       return "TTEVT_VFORK";
+    case TTEVT_SYSCALL_RETURN:
+       return "TTEVT_SYSCALL_RETURN";
+    case TTEVT_LWP_CREATE:
+       return "TTEVT_LWP_CREATE";
+    case TTEVT_LWP_TERMINATE:
+       return "TTEVT_LWP_TERMINATE";
+    case TTEVT_LWP_EXIT:
+       return "TTEVT_LWP_EXIT";
+    case TTEVT_LWP_ABORT_SYSCALL:
+       return "TTEVT_LWP_ABORT_SYSCALL";
+    case TTEVT_SYSCALL_ENTRY:
+       return "TTEVT_SYSCALL_ENTRY";
+    case TTEVT_SYSCALL_RESTART:	
+       return "TTEVT_SYSCALL_RESTART";
+    default :
+      return "?new event?";
+  }
+}
+
+
+/* This function translates the ttrace request enumeration into
+ * a character string that is its printable (aka "human readable")
+ * name.
+ */
+char *
+get_printable_name_of_ttrace_request (request)
+  ttreq_t  request;
+{
+  if (!IS_TTRACE_REQ (request))
+    return "?bad req?";
+
+  /* This enumeration is "gappy", so don't use a table. */
+  switch (request) {
+    case TT_PROC_SETTRC :
+      return "TT_PROC_SETTRC";
+    case TT_PROC_ATTACH :
+      return "TT_PROC_ATTACH";
+    case TT_PROC_DETACH :
+      return "TT_PROC_DETACH";
+    case TT_PROC_RDTEXT :
+      return "TT_PROC_RDTEXT";
+    case TT_PROC_WRTEXT :
+      return "TT_PROC_WRTEXT";
+    case TT_PROC_RDDATA :
+      return "TT_PROC_RDDATA";
+    case TT_PROC_WRDATA :
+      return "TT_PROC_WRDATA";
+    case TT_PROC_STOP :
+      return "TT_PROC_STOP";
+    case TT_PROC_CONTINUE :
+      return "TT_PROC_CONTINUE";
+    case TT_PROC_GET_PATHNAME :
+      return "TT_PROC_GET_PATHNAME";
+    case TT_PROC_GET_EVENT_MASK :
+      return "TT_PROC_GET_EVENT_MASK";
+    case TT_PROC_SET_EVENT_MASK :
+      return "TT_PROC_SET_EVENT_MASK";
+    case TT_PROC_GET_FIRST_LWP_STATE :
+      return "TT_PROC_GET_FIRST_LWP_STATE";
+    case TT_PROC_GET_NEXT_LWP_STATE :
+      return "TT_PROC_GET_NEXT_LWP_STATE";
+    case TT_PROC_EXIT :
+      return "TT_PROC_EXIT";
+    case TT_PROC_GET_MPROTECT :
+      return "TT_PROC_GET_MPROTECT";
+    case TT_PROC_SET_MPROTECT :
+      return "TT_PROC_SET_MPROTECT";
+    case TT_PROC_SET_SCBM :
+      return "TT_PROC_SET_SCBM";
+    case TT_LWP_STOP :
+      return "TT_LWP_STOP";
+    case TT_LWP_CONTINUE :
+      return "TT_LWP_CONTINUE";
+    case TT_LWP_SINGLE :
+      return "TT_LWP_SINGLE";
+    case TT_LWP_RUREGS :
+      return "TT_LWP_RUREGS";
+    case TT_LWP_WUREGS :
+      return "TT_LWP_WUREGS";
+    case TT_LWP_GET_EVENT_MASK :
+      return "TT_LWP_GET_EVENT_MASK";
+    case TT_LWP_SET_EVENT_MASK :
+      return "TT_LWP_SET_EVENT_MASK";
+    case TT_LWP_GET_STATE	:
+      return "TT_LWP_GET_STATE";
+    default :
+      return "?new req?";
+  }
+}
+
+
+/* This function translates the process state enumeration into
+ * a character string that is its printable (aka "human readable")
+ * name.
+ */
+static char *
+get_printable_name_of_process_state (process_state)
+  process_state_t  process_state;
+{
+  switch (process_state) {
+    case STOPPED:
+      return "STOPPED";
+    case FAKE_STEPPING:
+      return "FAKE_STEPPING";
+    case RUNNING:
+      return "RUNNING";
+    case FORKING:
+      return "FORKING";
+    case VFORKING:
+      return "VFORKING";
+    default:
+      return "?some unknown state?";
+  }
+}
+
+/* Set a ttrace thread state to a safe, initial state.
+ */
+static void
+clear_ttstate_t (tts)
+    ttstate_t *  tts;
+{
+    tts->tts_pid = 0;
+    tts->tts_lwpid = 0;
+    tts->tts_user_tid = 0;
+    tts->tts_event = TTEVT_NONE;
+}
+
+/* Copy ttrace thread state TTS_FROM into TTS_TO.
+ */
+static void
+copy_ttstate_t (tts_to, tts_from)
+    ttstate_t *  tts_to;
+    ttstate_t *  tts_from;
+{
+    memcpy ((char *) tts_to, (char *) tts_from, sizeof (*tts_to));
+}
+
+/* Are there any live threads we know about?
+ */
+static int 
+any_thread_records()
+{
+    return( thread_head.count > 0 );
+}
+
+/* Create, fill in and link in a thread descriptor.
+ */
+static thread_info *
+create_thread_info (pid, tid)
+    int     pid;
+    lwpid_t tid;
+{
+    thread_info *  new_p;
+    thread_info *  p;
+    int  thread_count_of_pid;
+
+    new_p = malloc( sizeof( thread_info ));
+    new_p->pid = pid;
+    new_p->tid = tid;
+    new_p->have_signal = 0;
+    new_p->have_start  = 0;
+    new_p->have_state  = 0;
+    clear_ttstate_t( &new_p->last_stop_state );
+    new_p->am_pseudo   = 0;
+    new_p->handled     = 0;
+    new_p->seen        = 0;
+    new_p->terminated  = 0;
+    new_p->next        = NULL;
+    new_p->next_pseudo = NULL;
+    new_p->stepping_mode = DO_DEFAULT;
+
+    if( 0 == thread_head.count ) {
+#ifdef THREAD_DEBUG
+        if( debug_on )
+            printf( "First thread, pid %d tid %d!\n", pid, tid );
+#endif
+        saved_real_pid = inferior_pid;
+    }
+    else {
+#ifdef THREAD_DEBUG
+        if( debug_on )
+            printf( "Subsequent thread, pid %d tid %d\n", pid, tid );
+#endif
+    }
+
+    /* Another day, another thread...
+     */
+    thread_head.count++;
+
+    /* The new thread always goes at the head of the list.
+     */
+    new_p->next       = thread_head.head;
+    thread_head.head  = new_p;
+
+    /* Is this the "pseudo" thread of a process?  It is if there's
+     * no other thread for this process on the list.  (Note that this
+     * accomodates multiple processes, such as we see even for simple
+     * cases like forking "non-threaded" programs.)
+     */
+    p = thread_head.head;
+    thread_count_of_pid = 0;
+    while (p)
+      {
+        if (p->pid == new_p->pid)
+          thread_count_of_pid++;
+        p = p->next;
+      }
+
+    /* Did we see any other threads for this pid?  (Recall that we just
+     * added this thread to the list...)
+     */
+    if (thread_count_of_pid == 1)
+      {
+        new_p->am_pseudo        = 1;
+        new_p->next_pseudo      = thread_head.head_pseudo;
+        thread_head.head_pseudo = new_p;
+      }
+    
+    return new_p;
+}
+
+/* Get rid of our thread info.
+ */
+static void
+clear_thread_info ()
+{
+    thread_info *p;
+    thread_info *q;
+
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        printf( "Clearing all thread info\n" );
+#endif
+
+    p = thread_head.head;
+    while( p ) {
+        q = p;
+        p = p->next;
+        free( q );
+    }
+
+    thread_head.head        = NULL;
+    thread_head.head_pseudo = NULL;
+    thread_head.count       = 0;
+
+    p = deleted_threads.head;
+    while( p ) {
+        q = p;
+        p = p->next;
+        free( q );
+    }
+
+    deleted_threads.head        = NULL;
+    deleted_threads.head_pseudo = NULL;
+    deleted_threads.count       = 0;
+
+    /* No threads, so can't have pending events.
+     */
+    more_events_left = 0;   
+}
+
+/* Given a tid, find the thread block for it.
+ */
+static thread_info *
+find_thread_info (tid)
+    lwpid_t tid;
+{
+    thread_info *p;
+
+    for( p = thread_head.head; p; p = p->next )  {
+       if( p->tid == tid ) {
+           return p;
+       }
+    }
+
+    for( p = deleted_threads.head; p; p = p->next )  {
+       if( p->tid == tid ) {
+           return p;
+       }
+    }
+    
+    return NULL;  
+}
+
+/* For any but the pseudo thread, this maps to the
+ * thread ID.  For the pseudo thread, if you pass either
+ * the thread id or the PID, you get the pseudo thread ID.
+ *
+ * We have to be prepared for core gdb to ask about
+ * deleted threads.  We do the map, but we don't like it.
+ */
+static lwpid_t
+map_from_gdb_tid( gdb_tid )
+    lwpid_t gdb_tid;
+{
+    thread_info *p;
+
+    /* First assume gdb_tid really is a tid, and try to find a
+     * matching entry on the threads list.
+     */
+    for( p = thread_head.head; p; p = p->next )  {
+        if( p->tid == gdb_tid )
+            return gdb_tid;
+    }
+
+    /* It doesn't appear to be a tid; perhaps it's really a pid?
+     * Try to find a "pseudo" thread entry on the threads list.
+     */
+    for (p = thread_head.head_pseudo; p != NULL; p = p->next_pseudo)
+      {
+        if (p->pid == gdb_tid)
+          return p->tid;
+      }
+
+    /* Perhaps it's the tid of a deleted thread we may still
+     * have some knowledge of?
+     */
+    for( p = deleted_threads.head; p; p = p-> next ) {
+        if( p->tid == gdb_tid )
+            return gdb_tid;
+    }
+
+    /* Or perhaps it's the pid of a deleted process we may still
+     * have knowledge of?
+     */
+    for (p = deleted_threads.head_pseudo; p != NULL; p = p->next_pseudo)
+      {
+        if (p->pid == gdb_tid)
+          return p->tid;
+      }
+
+    return 0;  /* Error? */
+}
+
+/* Map the other way: from a real tid to the
+ * "pid" known by core gdb.  This tid may be
+ * for a thread that just got deleted, so we
+ * also need to consider deleted threads.
+ */
+static lwpid_t
+map_to_gdb_tid( real_tid )
+    lwpid_t real_tid;
+{
+    thread_info *p;
+
+    for( p = thread_head.head; p; p = p->next )  {
+        if( p->tid == real_tid ) {
+            if( p->am_pseudo )
+                return p->pid;
+            else 
+                return real_tid;
+       }
+    }
+
+    for( p = deleted_threads.head; p; p = p-> next ) {
+        if( p->tid == real_tid )
+            if( p->am_pseudo )
+                return p->pid;  /* Error? */
+            else 
+                return real_tid;
+    }
+
+    return 0;  /* Error?  Never heard of this thread! */
+}
+
+/* Do any threads have saved signals?
+ */
+static int 
+saved_signals_exist ()
+{
+    thread_info *p;
+   
+    for( p = thread_head.head; p; p = p->next )  {
+       if( p->have_signal ) {
+           return 1;
+       }
+    }
+
+    return 0;
+}
+
+/* Is this the tid for the zero-th thread?
+ */
+static int 
+is_pseudo_thread (tid)
+    lwpid_t tid;
+{
+    thread_info *p = find_thread_info( tid );
+    if( NULL == p || p->terminated )
+        return 0;
+    else
+        return p->am_pseudo;
+}
+
+/* Is this thread terminated?
+ */
+static int 
+is_terminated (tid)
+    lwpid_t tid;
+{
+    thread_info *p = find_thread_info( tid );
+
+    if( NULL != p )
+        return p->terminated;
+
+    return 0;
+}
+
+/* Is this pid a real PID or a TID?
+ */
+static int 
+is_process_id (pid)
+  int  pid;
+{
+  lwpid_t  tid;
+  thread_info *  tinfo;
+  pid_t  this_pid;
+  int  this_pid_count;
+
+  /* What does PID really represent?
+   */
+  tid = map_from_gdb_tid (pid);
+  if (tid <= 0)
+    return 0; /* Actually, is probably an error... */
+
+  tinfo = find_thread_info (tid);
+
+  /* Does it appear to be a true thread?
+   */
+  if (! tinfo->am_pseudo)
+    return 0;
+
+  /* Else, it looks like it may be a process.  See if there's any other
+   * threads with the same process ID, though.  If there are, then TID
+   * just happens to be the first thread of several for this process.
+   */
+  this_pid = tinfo->pid;
+  this_pid_count = 0;
+  for (tinfo = thread_head.head; tinfo; tinfo = tinfo->next)
+    {
+      if (tinfo->pid == this_pid)
+        this_pid_count++;
+    }
+
+  return (this_pid_count == 1);
+}
+
+
+/* Add a thread to our info.  Prevent duplicate entries.
+ */
+static thread_info *
+add_tthread (pid, tid)
+    int     pid;
+    lwpid_t tid;
+{
+    thread_info *p;
+
+    p = find_thread_info( tid );
+    if( NULL == p )
+        p = create_thread_info( pid, tid );
+
+    return p;
+}
+
+/* Notice that a thread was deleted.
+ */
+static void
+del_tthread (tid)
+    lwpid_t tid;
+{
+    thread_info *p;
+    thread_info *chase;
+
+    if( thread_head.count <= 0 ) {
+        error( "Internal error in thread database." );
+        return;
+    }
+
+    chase = NULL;
+    for( p = thread_head.head; p; p = p->next )  {
+       if( p->tid == tid ) {
+
+#ifdef THREAD_DEBUG
+           if( debug_on )
+               printf( "Delete here: %d \n", tid );
+#endif
+
+           if( p->am_pseudo ) {
+               /*
+                * Deleting a main thread is ok if we're doing
+                * a parent-follow on a child; this is odd but
+                * not wrong.  It apparently _doesn't_ happen
+                * on the child-follow, as we don't just delete
+                * the pseudo while keeping the rest of the
+                * threads around--instead, we clear out the whole
+                * thread list at once.
+                */
+               thread_info *q;
+               thread_info *q_chase;
+               
+               q_chase = NULL;
+               for( q = thread_head.head_pseudo; q; q = q -> next ) {
+                    if( q == p ) {
+                        /* Remove from pseudo list.
+                         */
+                        if( q_chase == NULL )
+                            thread_head.head_pseudo = p->next_pseudo;
+                        else
+                            q_chase-> next = p->next_pseudo;
+                    }
+                    else
+                        q_chase = q;
+               }
+           }
+           
+           /* Remove from live list.
+            */
+           thread_head.count--;
+
+           if( NULL == chase )
+               thread_head.head = p->next;
+           else
+               chase->next      = p->next;
+
+           /* Add to deleted thread list.
+            */
+           p->next = deleted_threads.head;
+           deleted_threads.head = p;
+           deleted_threads.count++;
+           if( p->am_pseudo ) {
+               p->next_pseudo              = deleted_threads.head_pseudo;
+               deleted_threads.head_pseudo = p;
+           }
+           p->terminated = 1;
+           
+           return;
+       }
+
+       else
+           chase = p;
+    }
+}
+
+/* Get the pid for this tid. (Has to be a real TID!).
+ */
+static int
+get_pid_for (tid)
+    lwpid_t tid;
+{
+    thread_info *p;
+
+    for( p = thread_head.head; p; p = p->next ) {
+        if( p->tid == tid ) {
+            return p->pid;
+        }
+    }
+
+    for( p = deleted_threads.head; p; p = p->next ) {
+        if( p->tid == tid ) {
+            return p->pid;
+        }
+    }
+    
+    return 0;
+}
+
+/* Note that this thread's current event has been handled.
+ */
+static void
+set_handled( pid, tid )
+    int     pid;
+    lwpid_t tid;
+{
+    thread_info *p;
+    
+    p = find_thread_info( tid );
+    if( NULL == p )
+        p = add_tthread( pid, tid );
+
+    p->handled = 1;
+}
+
+/* Was this thread's current event handled?
+ */
+static int 
+was_handled( tid )
+    lwpid_t tid;
+{
+    thread_info *p;
+    
+    p = find_thread_info( tid );
+    if( NULL != p )
+        return p->handled;
+
+    return 0;  /* New threads have not been handled */
+}
+
+/* Set this thread to unhandled.
+ */
+static void
+clear_handled( tid )
+  lwpid_t  tid;
+{
+  thread_info *  p;
+    
+#ifdef WAIT_BUFFER_DEBUG
+    if( debug_on )
+        printf( "clear_handled %d\n", (int) tid );
+#endif
+
+  p = find_thread_info (tid);
+  if (p == NULL)
+    error ("Internal error: No thread state to clear?");
+
+  p->handled = 0;
+}
+
+/* Set all threads to unhandled.
+ */
+static void
+clear_all_handled ()
+{
+    thread_info *p;
+
+#ifdef WAIT_BUFFER_DEBUG
+    if( debug_on )
+        printf( "clear_all_handled\n" );
+#endif
+
+    for( p = thread_head.head; p; p = p->next ) {
+        p->handled = 0;
+    }
+
+    for( p = deleted_threads.head; p; p = p->next ) {
+        p->handled = 0;
+    }
+}
+
+/* Set this thread to default stepping mode.
+ */
+static void
+clear_stepping_mode( tid )
+  lwpid_t  tid;
+{
+  thread_info *  p;
+    
+#ifdef WAIT_BUFFER_DEBUG
+  if( debug_on )
+       printf( "clear_stepping_mode %d\n", (int) tid );
+#endif
+
+  p = find_thread_info (tid);
+  if (p == NULL)
+    error ("Internal error: No thread state to clear?");
+
+  p->stepping_mode = DO_DEFAULT;
+}
+
+/* Set all threads to do default continue on resume.
+ */
+static void
+clear_all_stepping_mode ()
+{
+    thread_info *p;
+
+#ifdef WAIT_BUFFER_DEBUG
+    if( debug_on )
+        printf( "clear_all_stepping_mode\n" );
+#endif
+
+    for( p = thread_head.head; p; p = p->next ) {
+        p->stepping_mode = DO_DEFAULT;
+    }
+
+    for( p = deleted_threads.head; p; p = p->next ) {
+        p->stepping_mode = DO_DEFAULT;
+    }
+}
+
+/* Set all threads to unseen on this pass.
+ */    
+static void
+set_all_unseen ()
+{
+    thread_info *p;
+
+    for( p = thread_head.head; p; p = p->next ) {
+        p->seen = 0;
+    }
+}
+
+#if (defined( THREAD_DEBUG ) || defined( PARANOIA ))
+/* debugging routine.
+ */
+static void
+print_tthread (p)
+    thread_info *  p;
+{
+    printf( " Thread pid %d, tid %d", p->pid, p->tid );
+    if( p->have_state ) 
+        printf( ", event is %s",
+            get_printable_name_of_ttrace_event( p->last_stop_state.tts_event ));
+            
+    if( p->am_pseudo )
+        printf( ", pseudo thread" );
+        
+    if( p->have_signal )
+        printf( ", have signal 0x%x", p->signal_value );
+        
+    if( p->have_start )
+        printf( ", have start at 0x%x", p->start );
+        
+    printf( ", step is %s", get_printable_name_of_stepping_mode( p->stepping_mode ));
+        
+    if( p->handled )
+        printf( ", handled" );
+    else
+        printf( ", not handled" );
+        
+    if( p->seen )
+        printf( ", seen" );
+    else
+        printf( ", not seen" );
+
+    printf( "\n" );
+}
+
+static void
+print_tthreads ()
+{
+    thread_info *p;
+
+    if( thread_head.count == 0 )
+        printf( "Thread list is empty\n" );
+    else {
+        printf( "Thread list has " );
+        if( thread_head.count == 1 )
+            printf( "1 entry:\n" );
+        else
+            printf( "%d entries:\n", thread_head.count );
+        for( p = thread_head.head; p; p = p->next ) {
+            print_tthread (p);
+        }
+    }
+
+    if( deleted_threads.count == 0 )
+        printf( "Deleted thread list is empty\n" );
+    else {
+        printf( "Deleted thread list has " );
+        if( deleted_threads.count == 1 )
+            printf( "1 entry:\n" );
+        else
+            printf( "%d entries:\n", deleted_threads.count );
+
+        for( p = deleted_threads.head; p; p = p->next ) {
+            print_tthread (p);
+        }
+    }
+}
+#endif
+
+/* Update the thread list based on the "seen" bits.
+ */
+static void
+update_thread_list ()
+{
+    thread_info *p;
+    thread_info *chase;
+
+    chase = NULL;
+    for( p = thread_head.head; p; p = p->next ) {
+      /* Is this an "unseen" thread which really happens to be a process?
+         If so, is it inferior_pid and is a vfork in flight?  If yes to
+         all, then DON'T REMOVE IT!  We're in the midst of moving a vfork
+         operation, which is a multiple step thing, to the point where we
+         can touch the parent again.  We've most likely stopped to examine
+         the child at a late stage in the vfork, and if we're not following
+         the child, we'd best not treat the parent as a dead "thread"...
+         */
+        if( (!p->seen) && p->am_pseudo && vfork_in_flight
+         && (p->pid != vforking_child_pid))
+            p->seen = 1;
+
+        if( !p->seen ) {
+            /* Remove this one
+             */
+
+#ifdef THREAD_DEBUG
+           if( debug_on )
+               printf( "Delete unseen thread: %d \n", p->tid );
+#endif
+           del_tthread( p->tid );
+       }
+    }
+}
+
+    
+
+/************************************************
+ *            O/S call wrappers                 *
+ ************************************************
+ */
+
+/* This function simply calls ttrace with the given arguments.  
+ * It exists so that all calls to ttrace are isolated.  All
+ * parameters should be as specified by "man 2 ttrace".
+ *
+ * No other "raw" calls to ttrace should exist in this module.
+ */
+static int
+call_real_ttrace( request, pid, tid, addr, data, addr2 )
+  ttreq_t          request;
+  pid_t            pid;
+  lwpid_t          tid;
+  TTRACE_ARG_TYPE  addr, data, addr2;
+{
+  int  tt_status;
+
+  errno = 0;
+  tt_status = ttrace( request, pid, tid, addr, data, addr2 );
+
+#ifdef THREAD_DEBUG
+  if (errno) {
+    /* Don't bother for a known benign error: if you ask for the
+     * first thread state, but there is only one thread and it's
+     * not stopped, ttrace complains.
+     *
+     * We have this inside the #ifdef because our caller will do
+     * this check for real.
+     */
+    if( request != TT_PROC_GET_FIRST_LWP_STATE
+    ||  errno   != EPROTO ) {
+        if( debug_on )
+            printf( "TT fail for %s, with pid %d, tid %d, status %d \n",
+                    get_printable_name_of_ttrace_request (request),
+                    pid, tid, tt_status );
+    }
+  }
+#endif
+
+#if 0
+  /* ??rehrauer: It would probably be most robust to catch and report
+   * failed requests here.  However, some clients of this interface
+   * seem to expect to catch & deal with them, so we'd best not.
+   */
+  if (errno) {
+    strcpy (reason_for_failure, "ttrace (");
+    strcat (reason_for_failure, get_printable_name_of_ttrace_request (request));
+    strcat (reason_for_failure, ")");
+    printf( "ttrace error, errno = %d\n", errno );
+    perror_with_name (reason_for_failure);
+  }
+#endif
+
+  return tt_status;
+}
+
+
+/* This function simply calls ttrace_wait with the given arguments.  
+ * It exists so that all calls to ttrace_wait are isolated.
+ *
+ * No "raw" calls to ttrace_wait should exist elsewhere.
+ */
+static int
+call_real_ttrace_wait( pid, tid, option, tsp, tsp_size )
+  int        pid;
+  lwpid_t    tid;
+  ttwopt_t   option;
+  ttstate_t *tsp;
+  size_t     tsp_size;
+{
+  int        ttw_status;
+  thread_info *  tinfo = NULL;
+
+  errno = 0;
+  ttw_status = ttrace_wait (pid, tid, option, tsp, tsp_size);
+  
+  if (errno) {
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "TW fail with pid %d, tid %d \n", pid, tid );
+#endif
+
+      perror_with_name ("ttrace wait");
+  }
+
+  return ttw_status;
+}
+
+
+/* A process may have one or more kernel threads, of which all or
+   none may be stopped.  This function returns the ID of the first
+   kernel thread in a stopped state, or 0 if none are stopped.
+
+   This function can be used with get_process_next_stopped_thread_id
+   to iterate over the IDs of all stopped threads of this process.
+ */
+static lwpid_t
+get_process_first_stopped_thread_id (pid, thread_state)
+  int  pid;
+  ttstate_t *  thread_state;
+{
+  int  tt_status;
+
+  tt_status = call_real_ttrace (
+                      TT_PROC_GET_FIRST_LWP_STATE,
+                      (pid_t) pid,
+                      (lwpid_t) TT_NIL,
+                      (TTRACE_ARG_TYPE) thread_state,
+                      (TTRACE_ARG_TYPE) sizeof (*thread_state),
+                      TT_NIL);
+                      
+  if (errno) {
+    if( errno == EPROTO) {
+        /* This is an error we can handle: there isn't any stopped
+         * thread.  This happens when we're re-starting the application
+         * and it has only one thread.  GET_NEXT handles the case of
+         * no more stopped threads well; GET_FIRST doesn't.  (A ttrace
+         * "feature".)
+         */
+        tt_status = 1;
+        errno     = 0;
+        return 0;
+    }
+    else
+        perror_with_name ("ttrace");
+  }
+  
+  if( tt_status < 0 )
+    /* Failed somehow.
+     */
+    return 0;
+
+  return thread_state->tts_lwpid;
+}
+
+
+/* This function returns the ID of the "next" kernel thread in a
+   stopped state, or 0 if there are none.  "Next" refers to the
+   thread following that of the last successful call to this
+   function or to get_process_first_stopped_thread_id, using
+   the value of thread_state returned by that call.
+
+   This function can be used with get_process_first_stopped_thread_id
+   to iterate over the IDs of all stopped threads of this process.
+ */
+static lwpid_t
+get_process_next_stopped_thread_id (pid, thread_state)
+  int  pid;
+  ttstate_t *  thread_state;
+{
+  int  tt_status;
+
+  tt_status = call_real_ttrace (
+                      TT_PROC_GET_NEXT_LWP_STATE,
+                      (pid_t) pid,
+                      (lwpid_t) TT_NIL,
+                      (TTRACE_ARG_TYPE) thread_state,
+                      (TTRACE_ARG_TYPE) sizeof (*thread_state),
+                      TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+
+  if (tt_status < 0)
+    /* Failed
+     */
+    return 0;
+
+  else if( tt_status == 0 ) {
+    /* End of list, no next state.  Don't return the
+     * tts_lwpid, as it's a meaningless "240".
+     *
+     * This is an HPUX "feature".
+     */
+    return 0;
+  }
+  
+  return thread_state->tts_lwpid;
+}
+
+/* ??rehrauer: Eventually this function perhaps should be calling
+   pid_to_thread_id.  However, that function currently does nothing
+   for HP-UX.  Even then, I'm not clear whether that function
+   will return a "kernel" thread ID, or a "user" thread ID.  If
+   the former, we can just call it here.  If the latter, we must
+   map from the "user" tid to a "kernel" tid.
+
+   NOTE: currently not called.
+ */
+static lwpid_t
+get_active_tid_of_pid (pid)
+  int  pid;
+{
+  ttstate_t  thread_state;
+
+  return get_process_first_stopped_thread_id (pid, &thread_state);
+}
+
+/* This function returns 1 if tt_request is a ttrace request that
+ * operates upon all threads of a (i.e., the entire) process.
+ */
+int
+is_process_ttrace_request (tt_request)
+  ttreq_t  tt_request;
+{
+  return IS_TTRACE_PROCREQ (tt_request);
+}
+
+
+/* This function translates a thread ttrace request into
+ * the equivalent process request for a one-thread process.
+ */
+static ttreq_t
+make_process_version( request )
+  ttreq_t request;
+{
+  if (!IS_TTRACE_REQ (request)) {
+    error( "Internal error, bad ttrace request made\n" );
+    return -1;
+  }
+
+  switch (request) {
+    case TT_LWP_STOP :
+      return TT_PROC_STOP;
+
+    case TT_LWP_CONTINUE :
+      return TT_PROC_CONTINUE;
+
+    case TT_LWP_GET_EVENT_MASK :
+      return TT_PROC_GET_EVENT_MASK;
+
+    case TT_LWP_SET_EVENT_MASK :
+      return TT_PROC_SET_EVENT_MASK;
+
+    case TT_LWP_SINGLE :
+    case TT_LWP_RUREGS :
+    case TT_LWP_WUREGS :
+    case TT_LWP_GET_STATE	:
+      return -1;       /* No equivalent */
+
+    default :
+      return request;
+  }
+}
+
+
+/* This function translates the "pid" used by the rest of
+ * gdb to a real pid and a tid.  It then calls "call_real_ttrace"
+ * with the given arguments.
+ *
+ * In general, other parts of this module should call this
+ * function when they are dealing with external users, who only
+ * have tids to pass (but they call it "pid" for historical
+ * reasons).
+ */
+static int
+call_ttrace( request, gdb_tid, addr, data, addr2 )
+  ttreq_t  request;
+  int      gdb_tid;
+  TTRACE_ARG_TYPE  addr, data, addr2;
+{
+  lwpid_t  real_tid;
+  int      real_pid;
+  ttreq_t  new_request;
+  int      tt_status;
+  char     reason_for_failure [100];  /* Arbitrary size, should be big enough. */
+  
+#ifdef THREAD_DEBUG
+  int	is_interesting = 0;
+
+  if( TT_LWP_RUREGS == request ) {
+     is_interesting = 1;          /* Adjust code here as desired */
+  }
+  
+  if( is_interesting && 0 && debug_on ) {
+      if( !is_process_ttrace_request( request )) {
+          printf( "TT: Thread request, tid is %d", gdb_tid );
+          printf( "== SINGLE at %x", addr );
+      }
+      else {
+          printf( "TT: Process request, tid is %d\n", gdb_tid );
+          printf( "==! SINGLE at %x", addr );
+      }
+  }
+#endif
+
+  /* The initial SETTRC and SET_EVENT_MASK calls (and all others
+   * which happen before any threads get set up) should go
+   * directly to "call_real_ttrace", so they don't happen here.
+   *
+   * But hardware watchpoints do a SET_EVENT_MASK, so we can't
+   * rule them out....
+   */
+#ifdef THREAD_DEBUG
+  if( request == TT_PROC_SETTRC && debug_on )
+      printf( "Unexpected call for TT_PROC_SETTRC\n" );
+#endif
+
+  /* Sometimes we get called with a bogus tid (e.g., if a
+   * thread has terminated, we return 0; inftarg later asks
+   * whether the thread has exited/forked/vforked).
+   */
+  if( gdb_tid == 0 )
+    {
+      errno = ESRCH;  /* ttrace's response would probably be "No such process". */
+      return -1;
+    }
+
+  /* All other cases should be able to expect that there are
+   * thread records.
+   */
+  if( !any_thread_records()) {
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          warning ("No thread records for ttrace call");
+#endif
+      errno = ESRCH;  /* ttrace's response would be "No such process". */
+      return -1;
+  }
+
+  /* OK, now the task is to translate the incoming tid into
+   * a pid/tid pair.
+   */
+  real_tid = map_from_gdb_tid( gdb_tid );
+  real_pid = get_pid_for( real_tid );
+
+  /* Now check the result.  "Real_pid" is NULL if our list
+   * didn't find it.  We have some tricks we can play to fix
+   * this, however.
+   */
+  if( 0 == real_pid ) {
+    ttstate_t  thread_state;
+
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        printf( "No saved pid for tid %d\n", gdb_tid );
+#endif
+
+    if( is_process_ttrace_request( request )) {
+     
+        /* Ok, we couldn't get a tid.  Try to translate to
+         * the equivalent process operation.  We expect this
+         * NOT to happen, so this is a desparation-type
+         * move.  It can happen if there is an internal
+         * error and so no "wait()" call is ever done.
+         */
+        new_request = make_process_version( request );
+        if( new_request == -1 ) {
+        
+#ifdef THREAD_DEBUG
+            if( debug_on )
+                printf( "...and couldn't make process version of thread operation\n" );
+#endif
+
+            /* Use hacky saved pid, which won't always be correct
+             * in the multi-process future.  Use tid as thread,
+             * probably dooming this to failure.  FIX!
+             */
+            if( saved_real_pid != 0 ) {
+#ifdef THREAD_DEBUG
+                if( debug_on )
+                    printf( "...using saved pid %d\n", saved_real_pid );
+#endif
+
+                real_pid = saved_real_pid;
+                real_tid = gdb_tid;
+            }
+
+            else
+                error( "Unable to perform thread operation" );
+        } 
+
+        else {
+            /* Sucessfully translated this to a process request,
+             * which needs no thread value.
+             */
+            real_pid = gdb_tid;
+            real_tid = 0;
+            request  = new_request;
+
+#ifdef THREAD_DEBUG
+            if( debug_on ) {
+                printf( "Translated thread request to process request\n" );
+                if( saved_real_pid == 0 )
+                    printf( "...but there's no saved pid\n" );
+                
+                else {
+                    if( gdb_tid != saved_real_pid )
+                        printf( "...but have the wrong pid (%d rather than %d)\n",
+                                gdb_tid, saved_real_pid );
+                }
+            }
+#endif
+        } /* Translated to a process request */
+    }     /* Is a process request */
+
+    else {
+        /* We have to have a thread.  Ooops.
+         */
+       error( "Thread request with no threads (%s)",
+               get_printable_name_of_ttrace_request( request ));
+    }
+  }
+
+  /* Ttrace doesn't like to see tid values on process requests,
+   * even if we have the right one.
+   */
+  if (is_process_ttrace_request (request)) {
+      real_tid = 0;
+  }
+  
+#ifdef THREAD_DEBUG
+  if( is_interesting && 0 && debug_on ) {
+    printf( "    now tid %d, pid %d\n", real_tid, real_pid );
+    printf( "    request is %s\n", get_printable_name_of_ttrace_request (request));
+  }
+#endif
+
+  /* Finally, the (almost) real call.
+   */
+  tt_status = call_real_ttrace (request, real_pid, real_tid, addr, data, addr2);
+
+#ifdef THREAD_DEBUG
+  if(is_interesting && debug_on ) {
+    if( !TT_OK( tt_status, errno )
+    &&  !(tt_status == 0 & errno == 0))
+      printf( " got error (errno==%d, status==%d)\n", errno, tt_status );
+  }
+#endif
+
+  return tt_status;
+}
+
+
+/* Stop all the threads of a process.
+ *
+ * NOTE: use of TT_PROC_STOP can cause a thread with a real event
+ *       to get a TTEVT_NONE event, discarding the old event.  Be
+ *       very careful, and only call TT_PROC_STOP when you mean it!
+ */
+static void
+stop_all_threads_of_process( real_pid )
+  pid_t  real_pid;
+{
+  int  ttw_status;
+
+  ttw_status = call_real_ttrace (TT_PROC_STOP,
+                                 (pid_t) real_pid,
+                                 (lwpid_t) TT_NIL,
+                                 (TTRACE_ARG_TYPE) TT_NIL,
+                                 (TTRACE_ARG_TYPE) TT_NIL,
+                                 TT_NIL );
+  if (errno)
+    perror_with_name ("ttrace stop of other threads");
+}
+
+
+/* Under some circumstances, it's unsafe to attempt to stop, or even
+   query the state of, a process' threads.
+
+   In ttrace-based HP-UX, an example is a vforking child process.  The
+   vforking parent and child are somewhat fragile, w/r/t what we can do
+   what we can do to them with ttrace, until after the child exits or
+   execs, or until the parent's vfork event is delivered.  Until that
+   time, we must not try to stop the process' threads, or inquire how
+   many there are, or even alter its data segments, or it typically dies
+   with a SIGILL.  Sigh.
+
+   This function returns 1 if this stopped process, and the event that
+   we're told was responsible for its current stopped state, cannot safely
+   have its threads examined.
+   */
+#define CHILD_VFORKED(evt,pid) \
+  (((evt) == TTEVT_VFORK) && ((pid) != inferior_pid))
+#define CHILD_URPED(evt,pid) \
+  ((((evt) == TTEVT_EXEC) || ((evt) == TTEVT_EXIT)) && ((pid) != vforking_child_pid))
+#define PARENT_VFORKED(evt,pid) \
+  (((evt) == TTEVT_VFORK) && ((pid) == inferior_pid))
+
+static int
+can_touch_threads_of_process (pid, stopping_event)
+  int  pid;
+  ttevents_t  stopping_event;
+{
+  if (CHILD_VFORKED (stopping_event, pid))
+    {
+      vforking_child_pid = pid;
+      vfork_in_flight = 1;
+    }
+
+  else if (vfork_in_flight &&
+           (PARENT_VFORKED (stopping_event, pid) ||
+            CHILD_URPED (stopping_event, pid)))
+    {
+      vfork_in_flight = 0;
+      vforking_child_pid = 0;
+    }
+
+  return ! vfork_in_flight;
+}
+
+
+/* If we can find an as-yet-unhandled thread state of a
+ * stopped thread of this process return 1 and set "tsp".
+ * Return 0 if we can't.
+ *
+ * If this function is used when the threads of PIS haven't
+ * been stopped, undefined behaviour is guaranteed!
+ */
+static int 
+select_stopped_thread_of_process (pid, tsp)
+  int  pid;
+  ttstate_t *  tsp;
+{
+  lwpid_t    candidate_tid,    tid;
+  ttstate_t  candidate_tstate, tstate;
+
+  /* If we're not allowed to touch the process now, then just
+   * return the current value of *TSP.
+   *
+   * This supports "vfork".  It's ok, really, to double the
+   * current event (the child EXEC, we hope!).
+   */
+  if (! can_touch_threads_of_process (pid, tsp->tts_event))
+    return 1;
+
+  /* Decide which of (possibly more than one) events to
+   * return as the first one.  We scan them all so that
+   * we always return the result of a fake-step first.
+   */
+  candidate_tid = 0;
+  for (tid = get_process_first_stopped_thread_id (pid, &tstate);
+       tid != 0;
+       tid = get_process_next_stopped_thread_id (pid, &tstate))
+    {
+      /* TTEVT_NONE events are uninteresting to our clients.  They're
+       * an artifact of our "stop the world" model--the thread is
+       * stopped because we stopped it.
+       */
+      if (tstate.tts_event == TTEVT_NONE) {
+          set_handled( pid, tstate.tts_lwpid );
+      }
+
+      /* Did we just single-step a single thread, without letting any
+       * of the others run?  Is this an event for that thread?
+       *
+       * If so, we believe our client would prefer to see this event
+       * over any others.  (Typically the client wants to just push
+       * one thread a little farther forward, and then go around
+       * checking for what all threads are doing.)
+       */
+      else if (doing_fake_step && (tstate.tts_lwpid == fake_step_tid))
+        {
+#ifdef WAIT_BUFFER_DEBUG
+          /* It's possible here to see either a SIGTRAP (due to
+           * successful completion of a step) or a SYSCALL_ENTRY
+           * (due to a step completion with active hardware
+           * watchpoints).
+           */
+           if( debug_on )
+               printf( "Ending fake step with tid %d, state %s\n",
+                       tstate.tts_lwpid,
+                       get_printable_name_of_ttrace_event( tstate.tts_event ));
+#endif 
+
+          /* Remember this one, and throw away any previous
+           * candidate.
+           */
+          candidate_tid    = tstate.tts_lwpid;
+          candidate_tstate = tstate;
+      }
+
+#ifdef FORGET_DELETED_BPTS
+
+      /* We can't just do this, as if we do, and then wind
+       * up the loop with no unhandled events, we need to
+       * handle that case--the appropriate reaction is to
+       * just continue, but there's no easy way to do that.
+       *
+       * Better to put this in the ttrace_wait call--if, when
+       * we fake a wait, we update our events based on the
+       * breakpoint_here_pc call and find there are no more events,
+       * then we better continue and so on.
+       *
+       * Or we could put it in the next/continue fake.
+       * But it has to go in the buffering code, not in the
+       * real go/wait code.
+       */
+      else if( (TTEVT_SIGNAL == tstate.tts_event)
+            && (5 == tstate.tts_u.tts_signal.tts_signo)
+            && (0 != get_raw_pc( tstate.tts_lwpid ))
+            && ! breakpoint_here_p( get_raw_pc( tstate.tts_lwpid )) ) {
+          /*
+           * If the user deleted a breakpoint while this
+           * breakpoint-hit event was buffered, we can forget
+           * it now.
+           */
+#ifdef WAIT_BUFFER_DEBUG
+           if( debug_on )
+               printf( "Forgetting deleted bp hit for thread %d\n",
+                       tstate.tts_lwpid );
+#endif 
+
+          set_handled( pid, tstate.tts_lwpid );
+      }
+#endif
+
+      /* Else, is this the first "unhandled" event?  If so,
+       * we believe our client wants to see it (if we don't
+       * see a fake-step later on in the scan).
+       */
+      else if( !was_handled( tstate.tts_lwpid ) && candidate_tid == 0 ) {
+          candidate_tid    = tstate.tts_lwpid;
+          candidate_tstate = tstate;
+      }
+
+      /* This is either an event that has already been "handled",
+       * and thus we believe is uninteresting to our client, or we
+       * already have a candidate event.  Ignore it...
+       */
+    }
+
+  /* What do we report?
+   */
+  if( doing_fake_step ) {
+      if( candidate_tid == fake_step_tid ) {
+          /* Fake step.
+           */
+          tstate = candidate_tstate;
+      }
+      else {
+          warning( "Internal error: fake-step failed to complete." );
+          return 0;
+      }
+  }
+  else if( candidate_tid != 0 ) {
+      /* Found a candidate unhandled event.
+       */
+      tstate = candidate_tstate;
+  }
+  else if( tid != 0 ) {
+      warning( "Internal error in call of ttrace_wait." );
+      return 0;
+  }
+  else {
+      warning ("Internal error: no unhandled thread event to select");
+      return 0;
+  }
+
+  copy_ttstate_t (tsp, &tstate);
+  return 1;
+} /* End of select_stopped_thread_of_process */
+
+#ifdef PARANOIA
+/* Check our internal thread data against the real thing.
+ */
+static void
+check_thread_consistency( real_pid )
+    pid_t real_pid;
+{
+    int          tid;       /* really lwpid_t */
+    ttstate_t    tstate;
+    thread_info *p;
+
+    /* Spin down the O/S list of threads, checking that they
+     * match what we've got.
+     */
+    for (tid = get_process_first_stopped_thread_id( real_pid, &tstate );
+         tid != 0;
+         tid = get_process_next_stopped_thread_id(  real_pid, &tstate )) {
+       
+        p = find_thread_info( tid );
+      
+        if( NULL == p ) {
+            warning( "No internal thread data for thread %d.", tid );
+            continue;
+        }
+
+        if( !p->seen ) {
+            warning( "Inconsistent internal thread data for thread %d.", tid );
+        }
+
+        if( p->terminated ) {
+            warning( "Thread %d is not terminated, internal error.", tid );
+            continue;
+        }
+
+
+#define TT_COMPARE( fld ) \
+            tstate.fld != p->last_stop_state.fld
+            
+        if( p->have_state ) {
+            if( TT_COMPARE( tts_pid      )
+             || TT_COMPARE( tts_lwpid    )
+             || TT_COMPARE( tts_user_tid )
+             || TT_COMPARE( tts_event    )
+             || TT_COMPARE( tts_flags    )
+             || TT_COMPARE( tts_scno     )
+             || TT_COMPARE( tts_scnargs  )) {
+                warning( "Internal thread data for thread %d is wrong.", tid );
+                continue;
+            }
+        }
+    }
+}
+#endif  /* PARANOIA */
+
+
+/* This function wraps calls to "call_real_ttrace_wait" so
+ * that a actual wait is only done when all pending events
+ * have been reported.
+ *
+ * Note that typically it is called with a pid of "0", i.e. 
+ * the "don't care" value.
+ *
+ * Return value is the status of the pseudo wait.
+ */
+static int
+call_ttrace_wait( pid, option, tsp, tsp_size )
+  int        pid;
+  ttwopt_t   option;
+  ttstate_t *tsp;
+  size_t     tsp_size;
+{
+  /* This holds the actual, for-real, true process ID.
+   */
+  static int real_pid;
+
+  /* As an argument to ttrace_wait, zero pid
+   * means "Any process", and zero tid means
+   * "Any thread of the specified process".
+   */
+  int      wait_pid = 0;
+  lwpid_t  wait_tid = 0;
+  lwpid_t  real_tid;
+
+  int       ttw_status = 0;   /* To be returned */
+
+  thread_info *  tinfo = NULL;
+
+  if( pid != 0 ) {
+      /* Unexpected case.
+       */
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "TW: Pid to wait on is %d\n", pid );
+#endif
+
+      if( !any_thread_records())
+          error( "No thread records for ttrace call w. specific pid" );
+
+      /* OK, now the task is to translate the incoming tid into
+       * a pid/tid pair.
+       */
+      real_tid = map_from_gdb_tid( pid );
+      real_pid = get_pid_for( real_tid );
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "==TW: real pid %d, real tid %d\n", real_pid, real_tid );
+#endif
+  }
+
+
+  /* Sanity checks and set-up.
+   *                             Process State
+   *
+   *                        Stopped   Running    Fake-step  (v)Fork
+   *                      \________________________________________
+   *                      |
+   *  No buffered events  |  error     wait       wait      wait
+   *                      |
+   *  Buffered events     |  debuffer  error      wait      debuffer (?)
+   *
+   */
+  if( more_events_left == 0 ) {
+
+      if( process_state == RUNNING ) {
+          /* OK--normal call of ttrace_wait with no buffered events.
+           */
+          ;
+      }
+      else if( process_state == FAKE_STEPPING ) {
+          /* Ok--call of ttrace_wait to support
+           * fake stepping with no buffered events.
+           *
+           * But we better be fake-stepping!
+           */
+          if( !doing_fake_step ) {
+              warning( "Inconsistent thread state." );
+          }
+      }
+      else if( (process_state == FORKING)
+            || (process_state == VFORKING)) {
+          /* Ok--there are two processes, so waiting
+           * for the second while the first is stopped
+           * is ok.  Handled bits stay as they were.
+           */
+           ;
+      }
+      else if( process_state == STOPPED ) {
+          warning( "Process not running at wait call." );
+      }
+      else
+          /* No known state.
+           */
+          warning( "Inconsistent process state." );
+  }
+  
+  else {
+      /* More events left
+       */
+      if( process_state == STOPPED ) {
+          /* OK--buffered events being unbuffered.
+           */
+          ;
+      }
+      else if( process_state == RUNNING ) {
+          /* An error--shouldn't have buffered events
+           * when running.
+           */
+          warning( "Trying to continue with buffered events:" );
+      }
+      else if( process_state == FAKE_STEPPING ) {
+          /*
+           * Better be fake-stepping!
+           */
+          if( !doing_fake_step ) {
+              warning( "Losing buffered thread events!\n" );
+          }
+      }
+      else if( (process_state == FORKING)
+            || (process_state == VFORKING)) {
+          /* Ok--there are two processes, so waiting
+           * for the second while the first is stopped
+           * is ok.  Handled bits stay as they were.
+           */
+           ;
+      }
+      else
+          warning( "Process in unknown state with buffered events." );
+  }
+
+  /* Sometimes we have to wait for a particular thread
+   * (if we're stepping over a bpt).  In that case, we
+   * _know_ it's going to complete the single-step we
+   * asked for (because we're only doing the step under
+   * certain very well-understood circumstances), so it
+   * can't block.
+   */
+  if( doing_fake_step ) {
+      wait_tid = fake_step_tid;
+      wait_pid = get_pid_for( fake_step_tid );
+
+#ifdef WAIT_BUFFER_DEBUG
+      if( debug_on )
+          printf( "Doing a wait after a fake-step for %d, pid %d\n",
+                  wait_tid, wait_pid );
+#endif
+  }
+
+  if( more_events_left == 0         /* No buffered events, need real ones. */
+  ||  process_state != STOPPED ) {
+      /* If there are no buffered events, and so we need
+       * real ones, or if we are FORKING, VFORKING, 
+       * FAKE_STEPPING or RUNNING, and thus have to do
+       * a real wait, then do a real wait.
+       */
+
+#ifdef WAIT_BUFFER_DEBUG
+      /* Normal case... */
+      if( debug_on )
+          printf( "TW: do it for real; pid %d, tid %d\n", wait_pid, wait_tid );
+#endif
+
+      /* The actual wait call.
+       */
+      ttw_status = call_real_ttrace_wait( wait_pid, wait_tid, option, tsp, tsp_size);
+
+      /* Note that the routines we'll call will be using "call_real_ttrace",
+       * not "call_ttrace", and thus need the real pid rather than the pseudo-tid
+       * the rest of the world uses (which is actually the tid).
+       */
+      real_pid = tsp->tts_pid;
+
+      /* For most events: Stop the world!
+       *
+       * It's sometimes not safe to stop all threads of a process.
+       * Sometimes it's not even safe to ask for the thread state
+       * of a process!
+       */
+      if (can_touch_threads_of_process (real_pid, tsp->tts_event))
+        {
+          /* If we're really only stepping a single thread, then don't
+           * try to stop all the others -- we only do this single-stepping
+           * business when all others were already stopped...and the stop
+           * would mess up other threads' events.
+           *
+           * Similiarly, if there are other threads with events,
+           * don't do the stop.
+           */
+          if( !doing_fake_step ) {
+            if( more_events_left > 0 )
+                warning( "Internal error in stopping process" );
+                
+            stop_all_threads_of_process (real_pid);
+
+            /* At this point, we could scan and update_thread_list(),
+             * and only use the local list for the rest of the
+             * module! We'd get rid of the scans in the various
+             * continue routines (adding one in attach).  It'd
+             * be great--UPGRADE ME!
+             */
+            }
+        }
+        
+#ifdef PARANOIA
+      else if( debug_on ) {
+          if( more_events_left > 0 )
+              printf( "== Can't stop process; more events!\n" );
+          else
+              printf( "== Can't stop process!\n" );
+      }
+#endif
+
+      process_state   = STOPPED;
+
+#ifdef WAIT_BUFFER_DEBUG
+      if( debug_on )
+          printf( "Process set to STOPPED\n" );
+#endif
+  }
+  
+  else {
+      /* Fake a call to ttrace_wait.  The process must be
+       * STOPPED, as we aren't going to do any wait.
+       */
+#ifdef WAIT_BUFFER_DEBUG
+      if( debug_on )
+          printf( "TW: fake it\n" );
+#endif
+
+      if( process_state != STOPPED ) {
+          warning( "Process not stopped at wait call, in state '%s'.\n",
+                   get_printable_name_of_process_state( process_state ));
+      }
+    
+      if( doing_fake_step )
+          error( "Internal error in stepping over breakpoint" );
+
+      ttw_status = 0;  /* Faking it is always successful! */
+  }   /* End of fake or not? if */
+
+  /* Pick an event to pass to our caller.  Be paranoid.
+   */
+  if( !select_stopped_thread_of_process( real_pid, tsp ))
+      warning( "Can't find event, using previous event." );
+
+  else if( tsp->tts_event == TTEVT_NONE )
+      warning( "Internal error: no thread has a real event." );
+
+  else if( doing_fake_step ) {
+      if( fake_step_tid != tsp->tts_lwpid )
+          warning( "Internal error in stepping over breakpoint." );
+          
+      /* This wait clears the (current) fake-step if there was one.
+       */
+      doing_fake_step = 0;
+      fake_step_tid   = 0;
+  }
+
+  /* We now have a correct tsp and ttw_status for the thread
+   * which we want to report.  So it's "handled"!  This call
+   * will add it to our list if it's not there already.
+   */
+  set_handled( real_pid, tsp->tts_lwpid );
+
+  /* Save a copy of the ttrace state of this thread, in our local
+     thread descriptor.
+
+     This caches the state.  The implementation of queries like
+     target_has_execd can then use this cached state, rather than
+     be forced to make an explicit ttrace call to get it.
+
+     (Guard against the condition that this is the first time we've
+     waited on, i.e., seen this thread, and so haven't yet entered
+     it into our list of threads.)
+   */
+  tinfo = find_thread_info (tsp->tts_lwpid);
+  if (tinfo != NULL) {
+    copy_ttstate_t (&tinfo->last_stop_state, tsp);
+    tinfo->have_state = 1;
+  }
+  
+  return ttw_status;
+} /* call_ttrace_wait */
+
+#if defined(CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL)
+int
+child_reported_exec_events_per_exec_call ()
+{
+  return 1;  /* ttrace reports the event once per call. */
+}
+#endif
+
+
+
+/* Our implementation of hardware watchpoints involves making memory
+   pages write-protected.  We must remember a page's original permissions,
+   and we must also know when it is appropriate to restore a page's
+   permissions to its original state.
+
+   We use a "dictionary" of hardware-watched pages to do this.  Each
+   hardware-watched page is recorded in the dictionary.  Each page's
+   dictionary entry contains the original permissions and a reference
+   count.  Pages are hashed into the dictionary by their start address.
+
+   When hardware watchpoint is set on page X for the first time, page X
+   is added to the dictionary with a reference count of 1.  If other
+   hardware watchpoints are subsequently set on page X, its reference
+   count is incremented.  When hardware watchpoints are removed from
+   page X, its reference count is decremented.  If a page's reference
+   count drops to 0, it's permissions are restored and the page's entry
+   is thrown out of the dictionary.
+   */
+typedef struct memory_page {
+  CORE_ADDR  page_start;
+  int  reference_count;
+  int  original_permissions;
+  struct memory_page *  next;
+  struct memory_page *  previous;
+} memory_page_t;
+
+#define MEMORY_PAGE_DICTIONARY_BUCKET_COUNT  128
+
+static struct {
+  LONGEST  page_count;
+  int  page_size;
+  int  page_protections_allowed;
+  /* These are just the heads of chains of actual page descriptors. */
+  memory_page_t  buckets [MEMORY_PAGE_DICTIONARY_BUCKET_COUNT];
+} memory_page_dictionary;
+
+
+static void
+require_memory_page_dictionary ()
+{
+  int  i;
+
+  /* Is the memory page dictionary ready for use?  If so, we're done. */
+  if (memory_page_dictionary.page_count >= (LONGEST) 0)
+    return;
+
+  /* Else, initialize it. */
+  memory_page_dictionary.page_count = (LONGEST) 0;
+
+  for (i=0; i<MEMORY_PAGE_DICTIONARY_BUCKET_COUNT; i++)
+    {
+      memory_page_dictionary.buckets[i].page_start = (CORE_ADDR) 0;
+      memory_page_dictionary.buckets[i].reference_count = 0;
+      memory_page_dictionary.buckets[i].next = NULL;
+      memory_page_dictionary.buckets[i].previous = NULL;
+    }
+}
+
+
+static void
+retire_memory_page_dictionary ()
+{
+  memory_page_dictionary.page_count = (LONGEST) -1;
+}
+
+
+/* Write-protect the memory page that starts at this address.
+
+   Returns the original permissions of the page.
+ */
+static int
+write_protect_page (pid, page_start)
+  int       pid;
+  CORE_ADDR page_start;
+{
+  int  tt_status;
+  int  original_permissions;
+  int  new_permissions;
+
+  tt_status = call_ttrace (TT_PROC_GET_MPROTECT,
+                           pid,
+                           (TTRACE_ARG_TYPE) page_start,
+                           TT_NIL,
+                           (TTRACE_ARG_TYPE) &original_permissions);
+  if (errno || (tt_status < 0))
+    {
+      return 0;  /* What else can we do? */
+    }
+
+  /* We'll also write-protect the page now, if that's allowed. */
+  if (memory_page_dictionary.page_protections_allowed)
+    {
+      new_permissions = original_permissions & ~PROT_WRITE;
+      tt_status = call_ttrace (TT_PROC_SET_MPROTECT,
+                               pid,
+                               (TTRACE_ARG_TYPE) page_start,
+                               (TTRACE_ARG_TYPE) memory_page_dictionary.page_size,
+                               (TTRACE_ARG_TYPE) new_permissions);
+      if (errno || (tt_status < 0))
+        {
+          return 0;  /* What else can we do? */
+        }
+    }
+
+  return original_permissions;
+}
+
+
+/* Unwrite-protect the memory page that starts at this address, restoring
+   (what we must assume are) its original permissions.
+   */
+static void
+unwrite_protect_page (pid, page_start, original_permissions)
+  int  pid;
+  CORE_ADDR  page_start;
+  int  original_permissions;
+{
+  int  tt_status;
+
+  tt_status = call_ttrace (TT_PROC_SET_MPROTECT,
+                           pid,
+                           (TTRACE_ARG_TYPE) page_start,
+                           (TTRACE_ARG_TYPE) memory_page_dictionary.page_size,
+                           (TTRACE_ARG_TYPE) original_permissions);
+  if (errno || (tt_status < 0))
+    {
+      return;  /* What else can we do? */
+    }
+}
+
+
+/* Memory page-protections are used to implement "hardware" watchpoints
+   on HP-UX.
+
+   For every memory page that is currently being watched (i.e., that
+   presently should be write-protected), write-protect it.
+   */
+void
+hppa_enable_page_protection_events (pid)
+  int  pid;
+{
+  int  bucket;
+
+  memory_page_dictionary.page_protections_allowed = 1;
+
+  for (bucket=0; bucket<MEMORY_PAGE_DICTIONARY_BUCKET_COUNT; bucket++)
+    {
+      memory_page_t *  page;
+
+      page = memory_page_dictionary.buckets[bucket].next;
+      while (page != NULL)
+        {
+          page->original_permissions = write_protect_page (pid, page->page_start);
+          page = page->next;
+        }
+    }
+}
+
+
+/* Memory page-protections are used to implement "hardware" watchpoints
+   on HP-UX.
+
+   For every memory page that is currently being watched (i.e., that
+   presently is or should be write-protected), un-write-protect it.
+   */
+void
+hppa_disable_page_protection_events (pid)
+  int  pid;
+{
+  int  bucket;
+
+  for (bucket=0; bucket<MEMORY_PAGE_DICTIONARY_BUCKET_COUNT; bucket++)
+    {
+      memory_page_t *  page;
+
+      page = memory_page_dictionary.buckets[bucket].next;
+      while (page != NULL)
+        {
+          unwrite_protect_page (pid, page->page_start, page->original_permissions);
+          page = page->next;
+        }
+    }
+
+  memory_page_dictionary.page_protections_allowed = 0;
+}
+
+/* Count the number of outstanding events.  At this
+ * point, we have selected one thread and its event
+ * as the one to be "reported" upwards to core gdb.
+ * That thread is already marked as "handled".
+ *
+ * Note: we could just scan our own thread list.  FIXME!
+ */
+static int
+count_unhandled_events( real_pid, real_tid )
+  int     real_pid;
+  lwpid_t real_tid;
+{
+  ttstate_t  tstate;
+  lwpid_t    ttid;
+  int        events_left;
+  
+  /* Ok, find out how many threads have real events to report.
+   */
+  events_left = 0;
+  ttid = get_process_first_stopped_thread_id( real_pid, &tstate );
+
+#ifdef THREAD_DEBUG
+  if( debug_on ) {
+      if( ttid == 0 )
+          printf( "Process %d has no threads\n", real_pid );
+      else
+          printf( "Process %d has these threads:\n", real_pid );
+  }
+#endif
+
+  while (ttid > 0 ) {
+      if( tstate.tts_event != TTEVT_NONE
+      &&  !was_handled( ttid )) {
+          /* TTEVT_NONE implies we just stopped it ourselves
+           * because we're the stop-the-world guys, so it's
+           * not an event from our point of view.
+           *
+           * If "was_handled" is true, this is an event we
+           * already handled, so don't count it.
+           *
+           * Note that we don't count the thread with the
+           * currently-reported event, as it's already marked
+           * as handled.
+           */
+          events_left++;
+      }
+         
+#if defined( THREAD_DEBUG ) || defined( WAIT_BUFFER_DEBUG )
+  if( debug_on ) {
+      if( ttid == real_tid )
+          printf( "*" );         /* Thread we're reporting */
+      else
+          printf( " " );
+         
+      if( tstate.tts_event != TTEVT_NONE )
+          printf( "+" );         /* Thread with a real event */
+      else
+          printf( " " );
+
+      if( was_handled( ttid ))
+          printf( "h" );         /* Thread has been handled */
+      else
+          printf( " " );
+         
+      printf( " %d, with event %s", ttid,
+              get_printable_name_of_ttrace_event( tstate.tts_event ));
+              
+      if( tstate.tts_event == TTEVT_SIGNAL
+       && 5 == tstate.tts_u.tts_signal.tts_signo ) {
+          CORE_ADDR pc_val;
+
+          pc_val = get_raw_pc( ttid );
+
+          if( pc_val > 0 )
+              printf( " breakpoint at 0x%x\n", pc_val );
+          else
+              printf( " bpt, can't fetch pc.\n" );
+      }
+      else
+          printf( "\n" );
+  }
+#endif
+
+      ttid = get_process_next_stopped_thread_id (real_pid, &tstate);
+  }
+
+#if defined( THREAD_DEBUG ) || defined( WAIT_BUFFER_DEBUG )
+  if( debug_on )
+      if( events_left > 0 )
+          printf( "There are thus %d pending events\n", events_left );
+#endif
+
+  return events_left;
+}
+
+/* This function is provided as a sop to clients that are calling
+ * ptrace_wait to wait for a process to stop.  (see the
+ * implementation of child_wait.)  Return value is the pid for
+ * the event that ended the wait.
+ *
+ * Note: used by core gdb and so uses the pseudo-pid (really tid).
+ */
+int
+ptrace_wait (pid, status)
+    int pid;
+    int *status;
+{
+  ttstate_t  tsp;
+  int        ttwait_return;
+  int        real_pid;
+  ttstate_t  state;
+  lwpid_t    real_tid;
+  int  return_pid;
+
+  /* The ptrace implementation of this also ignores pid.
+   */
+  *status = 0;
+
+  ttwait_return = call_ttrace_wait( 0, TTRACE_WAITOK, &tsp, sizeof (tsp) );
+  if (ttwait_return < 0)
+    {
+      /* ??rehrauer: It appears that if our inferior exits and we
+         haven't asked for exit events, that we're not getting any
+         indication save a negative return from ttrace_wait and an
+         errno set to ESRCH?
+         */
+      if (errno == ESRCH)
+        {
+          *status = 0;  /* WIFEXITED */
+          return inferior_pid;
+        }
+
+      warning( "Call of ttrace_wait returned with errno %d.",
+               errno );
+      *status = ttwait_return;
+      return inferior_pid;
+    }
+
+  real_pid = tsp.tts_pid;
+  real_tid = tsp.tts_lwpid;
+
+  /* One complication is that the "tts_event" structure has
+   * a set of flags, and more than one can be set.  So we
+   * either have to force an order (as we do here), or handle
+   * more than one flag at a time.
+   */
+  if (tsp.tts_event & TTEVT_LWP_CREATE) {
+
+     /* Unlike what you might expect, this event is reported in
+      * the _creating_ thread, and the _created_ thread (whose tid
+      * we have) is still running.  So we have to stop it.  This
+      * has already been done in "call_ttrace_wait", but should we
+      * ever abandon the "stop-the-world" model, here's the command
+      * to use:
+      *
+      *    call_ttrace( TT_LWP_STOP, real_tid, TT_NIL, TT_NIL, TT_NIL );
+      *
+      * Note that this would depend on being called _after_ "add_tthread"
+      * below for the tid-to-pid translation to be done in "call_ttrace".
+      */
+
+#ifdef THREAD_DEBUG
+     if( debug_on )
+         printf( "New thread: pid %d, tid %d, creator tid %d\n",
+                 real_pid, tsp.tts_u.tts_thread.tts_target_lwpid,
+                 real_tid );
+#endif
+
+     /* Now we have to return the tid of the created thread, not
+      * the creating thread, or "wait_for_inferior" won't know we
+      * have a new "process" (thread).  Plus we should record it
+      * right, too.
+      */
+      real_tid = tsp.tts_u.tts_thread.tts_target_lwpid;
+
+      add_tthread( real_pid, real_tid );
+  }
+
+  else if( (tsp.tts_event & TTEVT_LWP_TERMINATE )
+        || (tsp.tts_event & TTEVT_LWP_EXIT) ) {
+
+#ifdef THREAD_DEBUG
+     if( debug_on )
+         printf( "Thread dies: %d\n", real_tid );
+#endif
+
+     del_tthread( real_tid );
+  }
+
+  else if (tsp.tts_event & TTEVT_EXEC) {
+
+#ifdef THREAD_DEBUG 
+      if( debug_on )
+          printf( "Pid %d has zero'th thread %d; inferior pid is %d\n",
+                  real_pid, real_tid, inferior_pid );
+#endif
+
+     add_tthread( real_pid, real_tid );
+  }
+
+#ifdef THREAD_DEBUG
+  else if( debug_on ) {
+     printf( "Process-level event %s, using tid %d\n",
+             get_printable_name_of_ttrace_event( tsp.tts_event ),
+             real_tid );
+
+     /* OK to do this, as "add_tthread" won't add
+      * duplicate entries.  Also OK not to do it,
+      * as this event isn't one which can change the
+      * thread state.
+      */
+     add_tthread( real_pid, real_tid );
+  }
+#endif
+
+
+  /* How many events are left to report later?
+   * In a non-stop-the-world model, this isn't needed.
+   *
+   * Note that it's not always safe to query the thread state of a process,
+   * which is what count_unhandled_events does.  (If unsafe, we're left with
+   * no other resort than to assume that no more events remain...)
+   */
+  if (can_touch_threads_of_process (real_pid, tsp.tts_event))
+      more_events_left = count_unhandled_events( real_pid, real_tid );
+      
+  else {
+      if( more_events_left > 0 )
+          warning( "Vfork or fork causing loss of %d buffered events.",
+                   more_events_left );
+          
+      more_events_left = 0;
+  }
+
+  /* Attempt to translate the ttrace_wait-returned status into the
+     ptrace equivalent.
+
+     ??rehrauer: This is somewhat fragile.  We really ought to rewrite
+     clients that expect to pick apart a ptrace wait status, to use
+     something a little more abstract.
+     */
+  if (   (tsp.tts_event & TTEVT_EXEC)
+      || (tsp.tts_event & TTEVT_FORK)
+      || (tsp.tts_event & TTEVT_VFORK))
+    {
+      /* Forks come in pairs (parent and child), so core gdb
+       * will do two waits.  Be ready to notice this.
+       */
+      if (tsp.tts_event & TTEVT_FORK)
+        {
+          process_state = FORKING;
+          
+#ifdef WAIT_BUFFER_DEBUG
+          if( debug_on )
+              printf( "Process set to FORKING\n" );
+#endif
+        }
+      else if (tsp.tts_event & TTEVT_VFORK)
+        {
+          process_state = VFORKING;
+          
+#ifdef WAIT_BUFFER_DEBUG
+          if( debug_on )
+              printf( "Process set to VFORKING\n" );
+#endif
+        }
+
+      /* Make an exec or fork look like a breakpoint.  Definitely a hack,
+         but I don't think non HP-UX-specific clients really carefully
+         inspect the first events they get after inferior startup, so
+         it probably almost doesn't matter what we claim this is.
+         */
+
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "..a process 'event'\n" );
+#endif
+
+      /* Also make fork and exec events look like bpts, so they can be caught.
+      */
+      *status = 0177 | (_SIGTRAP << 8);
+    }
+
+  /* Special-cases: We ask for syscall entry and exit events to implement
+     "fast" (aka "hardware") watchpoints.
+
+     When we get a syscall entry, we want to disable page-protections,
+     and resume the inferior; this isn't an event we wish for
+     wait_for_inferior to see.  Note that we must resume ONLY the
+     thread that reported the syscall entry; we don't want to allow
+     other threads to run with the page protections off, as they might
+     then be able to write to watch memory without it being caught.
+
+     When we get a syscall exit, we want to reenable page-protections,
+     but we don't want to resume the inferior; this is an event we wish
+     wait_for_inferior to see.  Make it look like the signal we normally
+     get for a single-step completion.  This should cause wait_for_inferior
+     to evaluate whether any watchpoint triggered.
+
+     Or rather, that's what we'd LIKE to do for syscall exit; we can't,
+     due to some HP-UX "features".  Some syscalls have problems with
+     write-protections on some pages, and some syscalls seem to have
+     pending writes to those pages at the time we're getting the return
+     event.  So, we'll single-step the inferior to get out of the syscall,
+     and then reenable protections.
+
+     Note that we're intentionally allowing the syscall exit case to
+     fall through into the succeeding cases, as sometimes we single-
+     step out of one syscall only to immediately enter another...
+   */
+  else if ((tsp.tts_event & TTEVT_SYSCALL_ENTRY)
+        || (tsp.tts_event & TTEVT_SYSCALL_RETURN))
+    {
+      /* Make a syscall event look like a breakpoint.  Same comments
+         as for exec & fork events.
+         */
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "..a syscall 'event'\n" );
+#endif
+
+      /* Also make syscall events look like bpts, so they can be caught.
+      */
+      *status = 0177 | (_SIGTRAP << 8);
+    }
+
+  else if ((tsp.tts_event & TTEVT_LWP_CREATE)
+        || (tsp.tts_event & TTEVT_LWP_TERMINATE)
+        || (tsp.tts_event & TTEVT_LWP_EXIT))
+    {
+      /* Make a thread event look like a breakpoint.  Same comments
+       * as for exec & fork events.
+       */
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "..a thread 'event'\n" );
+#endif
+
+      /* Also make thread events look like bpts, so they can be caught.
+      */
+      *status = 0177 | (_SIGTRAP << 8);
+    }
+    
+  else if ((tsp.tts_event & TTEVT_EXIT))
+    {  /* WIFEXITED */
+    
+#ifdef THREAD_DEBUG
+       if( debug_on )
+           printf( "..an exit\n" );
+#endif
+
+      /* Prevent rest of gdb from thinking this is
+       * a new thread if for some reason it's never
+       * seen the main thread before.
+       */
+      inferior_pid = map_to_gdb_tid( real_tid ); /* HACK, FIX */
+      
+      *status = 0 | (tsp.tts_u.tts_exit.tts_exitcode);
+    }
+    
+  else if (tsp.tts_event & TTEVT_SIGNAL)
+    {  /* WIFSTOPPED */
+#ifdef THREAD_DEBUG
+       if( debug_on )
+           printf( "..a signal, %d\n", tsp.tts_u.tts_signal.tts_signo );
+#endif
+
+      *status = 0177 | (tsp.tts_u.tts_signal.tts_signo << 8);
+    }
+
+  else
+    {  /* !WIFSTOPPED */
+
+      /* This means the process or thread terminated.  But we should've
+         caught an explicit exit/termination above.  So warn (this is
+         really an internal error) and claim the process or thread
+         terminated with a SIGTRAP.
+       */
+
+      warning ("process_wait: unknown process state");
+
+#ifdef THREAD_DEBUG
+      if( debug_on )
+          printf( "Process-level event %s, using tid %d\n",
+                  get_printable_name_of_ttrace_event( tsp.tts_event ),
+                  real_tid );
+#endif
+
+      *status = _SIGTRAP;
+    }
+
+  target_post_wait (tsp.tts_pid, *status);
+
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf( "Done waiting, pid is %d, tid %d\n", real_pid, real_tid );
+#endif
+
+  /* All code external to this module uses the tid, but calls
+   * it "pid".  There's some tweaking so that the outside sees
+   * the first thread as having the same number as the starting
+   * pid.
+   */
+  return_pid = map_to_gdb_tid( real_tid );
+
+  /* Remember this for later use in "hppa_prepare_to_proceed".
+   */
+  old_gdb_pid  = inferior_pid;
+  reported_pid = return_pid;
+  reported_bpt = ((tsp.tts_event & TTEVT_SIGNAL) && (5 == tsp.tts_u.tts_signal.tts_signo));
+
+  if( real_tid == 0 || return_pid == 0 ) {
+      warning( "Internal error: process-wait failed." );
+  }
+        
+  return return_pid;
+}
+
+
+/* This function causes the caller's process to be traced by its
+   parent.  This is intended to be called after GDB forks itself,
+   and before the child execs the target.  Despite the name, it
+   is called by the child.
+
+   Note that HP-UX ttrace is rather funky in how this is done.
+   If the parent wants to get the initial exec event of a child,
+   it must set the ttrace event mask of the child to include execs.
+   (The child cannot do this itself.)  This must be done after the
+   child is forked, but before it execs.
+
+   To coordinate the parent and child, we implement a semaphore using
+   pipes.  After SETTRC'ing itself, the child tells the parent that
+   it is now traceable by the parent, and waits for the parent's
+   acknowledgement.  The parent can then set the child's event mask,
+   and notify the child that it can now exec.
+
+   (The acknowledgement by parent happens as a result of a call to
+   child_acknowledge_created_inferior.)
+ */
+int
+parent_attach_all ()
+{
+  int  tt_status;
+
+  /* We need a memory home for a constant, to pass it to ttrace.
+     The value of the constant is arbitrary, so long as both
+     parent and child use the same value.  Might as well use the
+     "magic" constant provided by ttrace...
+   */
+  uint64_t  tc_magic_child = TT_VERSION;
+  uint64_t  tc_magic_parent = 0;
+
+  tt_status = call_real_ttrace (
+                            TT_PROC_SETTRC,
+                            (int)     TT_NIL,
+                            (lwpid_t) TT_NIL,
+                            TT_NIL,
+                            (TTRACE_ARG_TYPE) TT_VERSION,
+                            TT_NIL );
+
+  if (tt_status < 0)
+    return tt_status;
+
+  /* Notify the parent that we're potentially ready to exec(). */
+  write (startup_semaphore.child_channel[SEM_TALK],
+         &tc_magic_child,
+         sizeof (tc_magic_child));
+
+  /* Wait for acknowledgement from the parent. */
+  read (startup_semaphore.parent_channel[SEM_LISTEN],
+        &tc_magic_parent,
+        sizeof (tc_magic_parent));
+        
+  if (tc_magic_child != tc_magic_parent)
+    warning ("mismatched semaphore magic");
+
+  /* Discard our copy of the semaphore. */
+  (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+  (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.child_channel[SEM_TALK]);
+  
+  return tt_status;
+}
+
+/* Despite being file-local, this routine is dealing with
+ * actual process IDs, not thread ids.  That's because it's
+ * called before the first "wait" call, and there's no map
+ * yet from tids to pids.
+ *
+ * When it is called, a forked child is running, but waiting on
+ * the semaphore.  If you stop the child and re-start it,
+ * things get confused, so don't do that!  An attached child is
+ * stopped.
+ *
+ * Since this is called after either attach or run, we
+ * have to be the common part of both.
+ */
+static void
+require_notification_of_events ( real_pid )
+  int  real_pid;
+{
+  int  tt_status;
+  ttevent_t  notifiable_events;
+
+  lwpid_t    tid;
+  ttstate_t  thread_state;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf( "Require notif, pid is %d\n", real_pid );
+#endif
+
+  /* Temporary HACK: tell inftarg.c/child_wait to not
+   * loop until pids are the same.
+   */
+  not_same_real_pid = 0;
+
+  sigemptyset (&notifiable_events.tte_signals);
+  notifiable_events.tte_opts = TTEO_NONE;
+
+  /* This ensures that forked children inherit their parent's
+   * event mask, which we're setting here.
+   *
+   * NOTE: if you debug gdb with itself, then the ultimate
+   *       debuggee gets flags set by the outermost gdb, as
+   *       a child of a child will still inherit.
+   */
+  notifiable_events.tte_opts |= TTEO_PROC_INHERIT;
+
+  notifiable_events.tte_events  = TTEVT_DEFAULT;
+  notifiable_events.tte_events |= TTEVT_SIGNAL;
+  notifiable_events.tte_events |= TTEVT_EXEC;
+  notifiable_events.tte_events |= TTEVT_EXIT;
+  notifiable_events.tte_events |= TTEVT_FORK;
+  notifiable_events.tte_events |= TTEVT_VFORK;
+  notifiable_events.tte_events |= TTEVT_LWP_CREATE;
+  notifiable_events.tte_events |= TTEVT_LWP_EXIT;
+  notifiable_events.tte_events |= TTEVT_LWP_TERMINATE;
+
+  tt_status = call_real_ttrace (
+                           TT_PROC_SET_EVENT_MASK,
+                           real_pid,
+                           (lwpid_t) TT_NIL,
+                           (TTRACE_ARG_TYPE) &notifiable_events,
+                           (TTRACE_ARG_TYPE) sizeof (notifiable_events),
+                           TT_NIL);
+}
+
+static void
+require_notification_of_exec_events ( real_pid )
+  int  real_pid;
+{
+  int  tt_status;
+  ttevent_t  notifiable_events;
+
+  lwpid_t    tid;
+  ttstate_t  thread_state;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf( "Require notif, pid is %d\n", real_pid );
+#endif
+
+  /* Temporary HACK: tell inftarg.c/child_wait to not
+   * loop until pids are the same.
+   */
+  not_same_real_pid = 0;
+
+  sigemptyset (&notifiable_events.tte_signals);
+  notifiable_events.tte_opts = TTEO_NOSTRCCHLD;
+
+  /* This ensures that forked children don't inherit their parent's
+   * event mask, which we're setting here.
+   */
+  notifiable_events.tte_opts &= ~TTEO_PROC_INHERIT;
+
+  notifiable_events.tte_events  = TTEVT_DEFAULT;
+  notifiable_events.tte_events |= TTEVT_EXEC;
+  notifiable_events.tte_events |= TTEVT_EXIT;
+
+  tt_status = call_real_ttrace (
+                           TT_PROC_SET_EVENT_MASK,
+                           real_pid,
+                           (lwpid_t) TT_NIL,
+                           (TTRACE_ARG_TYPE) &notifiable_events,
+                           (TTRACE_ARG_TYPE) sizeof (notifiable_events),
+                           TT_NIL);
+}
+
+
+/* This function is called by the parent process, with pid being the
+ * ID of the child process, after the debugger has forked.
+ */
+void
+child_acknowledge_created_inferior (pid)
+    int  pid;
+{
+  /* We need a memory home for a constant, to pass it to ttrace.
+     The value of the constant is arbitrary, so long as both
+     parent and child use the same value.  Might as well use the
+     "magic" constant provided by ttrace...
+     */
+  uint64_t  tc_magic_parent = TT_VERSION;
+  uint64_t  tc_magic_child = 0;
+
+  /* Wait for the child to tell us that it has forked. */
+  read (startup_semaphore.child_channel[SEM_LISTEN],
+        &tc_magic_child,
+        sizeof(tc_magic_child));
+
+  /* Clear thread info now.  We'd like to do this in
+   * "require...", but that messes up attach.
+   */
+  clear_thread_info();
+
+  /* Tell the "rest of gdb" that the initial thread exists.
+   * This isn't really a hack.  Other thread-based versions
+   * of gdb (e.g. gnu-nat.c) seem to do the same thing.
+   *
+   * Q: Why don't we also add this thread to the local
+   *    list via "add_tthread"?
+   *
+   * A: Because we don't know the tid, and can't stop the
+   *    the process safely to ask what it is.  Anyway, we'll
+   *    add it when it gets the EXEC event.
+   */
+  add_thread( pid );       /* in thread.c */
+
+  /* We can now set the child's ttrace event mask.
+   */
+  require_notification_of_exec_events (pid);
+
+  /* Tell ourselves that the process is running.
+   */
+  process_state = RUNNING;
+
+  /* Notify the child that it can exec. */
+  write (startup_semaphore.parent_channel[SEM_TALK],
+         &tc_magic_parent,
+         sizeof (tc_magic_parent));
+
+  /* Discard our copy of the semaphore. */
+  (void) close (startup_semaphore.parent_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.parent_channel[SEM_TALK]);
+  (void) close (startup_semaphore.child_channel[SEM_LISTEN]);
+  (void) close (startup_semaphore.child_channel[SEM_TALK]);
+}
+
+
+/*
+ * arrange for notification of all events by
+ * calling require_notification_of_events.
+ */
+void
+child_post_startup_inferior ( real_pid)
+  int  real_pid;
+{
+  require_notification_of_events (real_pid);
+}
+
+/* From here on, we should expect tids rather than pids.
+ */
+static void
+hppa_enable_catch_fork (tid)
+  int  tid;
+{
+  int        tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled.
+   */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL );
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Add forks to that set. */
+  ttrace_events.tte_events |= TTEVT_FORK;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf( "enable fork, tid is %d\n", tid );
+#endif
+
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+static void
+hppa_disable_catch_fork (tid)
+  int  tid;
+{
+  int        tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled.
+   */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Remove forks from that set. */
+  ttrace_events.tte_events &= ~TTEVT_FORK;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf("disable fork, tid is %d\n", tid );
+#endif
+
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+#if defined(CHILD_INSERT_FORK_CATCHPOINT)
+int
+child_insert_fork_catchpoint (tid)
+  int  tid;
+{
+  /* Enable reporting of fork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_REMOVE_FORK_CATCHPOINT)
+int
+child_remove_fork_catchpoint (tid)
+  int  tid;
+{
+  /* Disable reporting of fork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+
+static void
+hppa_enable_catch_vfork (tid)
+  int  tid;
+{
+  int  tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled.
+   */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Add vforks to that set. */
+  ttrace_events.tte_events |= TTEVT_VFORK;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf("enable vfork, tid is %d\n", tid );
+#endif
+
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+static void
+hppa_disable_catch_vfork (tid)
+  int  tid;
+{
+  int  tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled. */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Remove vforks from that set. */
+  ttrace_events.tte_events &= ~TTEVT_VFORK;
+
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf("disable vfork, tid is %d\n", tid );
+#endif
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           tid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+#if defined(CHILD_INSERT_VFORK_CATCHPOINT)
+int
+child_insert_vfork_catchpoint (tid)
+  int  tid;
+{
+  /* Enable reporting of vfork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_REMOVE_VFORK_CATCHPOINT)
+int
+child_remove_vfork_catchpoint (tid)
+  int  tid;
+{
+  /* Disable reporting of vfork events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+#if defined(CHILD_HAS_FORKED)
+
+/* Q: Do we need to map the returned process ID to a thread ID?
+ *
+ * A: I don't think so--here we want a _real_ pid.  Any later
+ *    operations will call "require_notification_of_events" and
+ *    start the mapping.
+ */
+int
+child_has_forked (tid, childpid)
+  int  tid;
+  int *childpid;
+{
+  int  tt_status;
+  ttstate_t  ttrace_state;
+  thread_info *  tinfo;
+
+  /* Do we have cached thread state that we can consult?  If so, use it. */
+  tinfo = find_thread_info (map_from_gdb_tid (tid));
+  if (tinfo != NULL) {
+    copy_ttstate_t (&ttrace_state, &tinfo->last_stop_state);
+  }
+
+  /* Nope, must read the thread's current state */
+  else
+    {
+      tt_status = call_ttrace (TT_LWP_GET_STATE,
+                               tid,
+                               (TTRACE_ARG_TYPE) &ttrace_state,
+                               (TTRACE_ARG_TYPE) sizeof (ttrace_state),
+                               TT_NIL);
+
+      if (errno)
+        perror_with_name ("ttrace");
+    
+      if (tt_status < 0)
+        return 0;
+    }
+
+  if (ttrace_state.tts_event & TTEVT_FORK)
+    {
+      *childpid = ttrace_state.tts_u.tts_fork.tts_fpid;
+      return 1;
+    }
+
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_HAS_VFORKED)
+
+/* See child_has_forked for pid discussion.
+ */
+int
+child_has_vforked (tid, childpid)
+  int  tid;
+  int *  childpid;
+{
+  int  tt_status;
+  ttstate_t  ttrace_state;
+  thread_info *  tinfo;
+
+  /* Do we have cached thread state that we can consult?  If so, use it. */
+  tinfo = find_thread_info (map_from_gdb_tid (tid));
+  if (tinfo != NULL)
+    copy_ttstate_t (&ttrace_state, &tinfo->last_stop_state);
+
+  /* Nope, must read the thread's current state */
+  else
+    {
+      tt_status = call_ttrace (TT_LWP_GET_STATE,
+                               tid,
+                               (TTRACE_ARG_TYPE) &ttrace_state,
+                               (TTRACE_ARG_TYPE) sizeof (ttrace_state),
+                               TT_NIL);
+
+      if (errno)
+        perror_with_name ("ttrace");
+    
+      if (tt_status < 0)
+        return 0;
+    }
+
+  if (ttrace_state.tts_event & TTEVT_VFORK)
+    {
+      *childpid = ttrace_state.tts_u.tts_fork.tts_fpid;
+      return 1;
+    }
+
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC)
+int
+child_can_follow_vfork_prior_to_exec ()
+{
+  /* ttrace does allow this.
+
+     ??rehrauer: However, I had major-league problems trying to
+     convince wait_for_inferior to handle that case.  Perhaps when
+     it is rewritten to grok multiple processes in an explicit way...
+     */
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_INSERT_EXEC_CATCHPOINT)
+int
+child_insert_exec_catchpoint (tid)
+  int  tid;
+{
+  /* Enable reporting of exec events from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_REMOVE_EXEC_CATCHPOINT)
+int
+child_remove_exec_catchpoint (tid)
+  int  tid;
+{
+  /* Disable reporting of execevents from the kernel. */
+  /* ??rehrauer: For the moment, we're always enabling these events,
+     and just ignoring them if there's no catchpoint to catch them.
+     */
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_HAS_EXECD)
+int
+child_has_execd (tid, execd_pathname)
+  int  tid;
+  char **  execd_pathname;
+{
+  int  tt_status;
+  ttstate_t  ttrace_state;
+  thread_info *  tinfo;
+
+  /* Do we have cached thread state that we can consult?  If so, use it. */
+  tinfo = find_thread_info (map_from_gdb_tid (tid));
+  if (tinfo != NULL)
+    copy_ttstate_t (&ttrace_state, &tinfo->last_stop_state);
+
+  /* Nope, must read the thread's current state */
+  else
+    {
+      tt_status = call_ttrace (TT_LWP_GET_STATE,
+                               tid,
+                               (TTRACE_ARG_TYPE) &ttrace_state,
+                               (TTRACE_ARG_TYPE) sizeof (ttrace_state),
+                               TT_NIL);
+
+      if (errno)
+        perror_with_name ("ttrace");
+    
+      if (tt_status < 0)
+        return 0;
+    }
+
+  if (ttrace_state.tts_event & TTEVT_EXEC)
+    {
+      /* See child_pid_to_exec_file in this file: this is a macro.
+       */
+      char *  exec_file = target_pid_to_exec_file (tid);
+      
+      *execd_pathname = savestring (exec_file, strlen (exec_file));
+      return 1;
+    }
+
+  return 0;
+}
+#endif
+
+
+#if defined(CHILD_HAS_SYSCALL_EVENT)
+int
+child_has_syscall_event (pid, kind, syscall_id)
+  int  pid;
+  enum target_waitkind *  kind;
+  int *  syscall_id;
+{
+  int  tt_status;
+  ttstate_t  ttrace_state;
+  thread_info *  tinfo;
+
+  /* Do we have cached thread state that we can consult?  If so, use it. */
+  tinfo = find_thread_info (map_from_gdb_tid (pid));
+  if (tinfo != NULL)
+    copy_ttstate_t (&ttrace_state, &tinfo->last_stop_state);
+
+  /* Nope, must read the thread's current state */
+  else
+    {
+    tt_status = call_ttrace (TT_LWP_GET_STATE,
+                               pid,
+                               (TTRACE_ARG_TYPE) &ttrace_state,
+                               (TTRACE_ARG_TYPE) sizeof (ttrace_state),
+                               TT_NIL);
+
+      if (errno)
+        perror_with_name ("ttrace");
+    
+      if (tt_status < 0)
+        return 0;
+    }
+
+  *kind = TARGET_WAITKIND_SPURIOUS;  /* Until proven otherwise... */
+  *syscall_id = -1;
+
+  if (ttrace_state.tts_event & TTEVT_SYSCALL_ENTRY)
+    *kind = TARGET_WAITKIND_SYSCALL_ENTRY;
+  else if (ttrace_state.tts_event & TTEVT_SYSCALL_RETURN)
+    *kind = TARGET_WAITKIND_SYSCALL_RETURN;
+  else
+    return 0;
+
+  *syscall_id = ttrace_state.tts_scno;
+  return 1;
+}
+#endif
+
+
+
+#if defined(CHILD_THREAD_ALIVE)
+
+/* Check to see if the given thread is alive.
+ *
+ * We'll trust the thread list, as the more correct
+ * approach of stopping the process and spinning down
+ * the OS's thread list is _very_ expensive.
+ *
+ * May need a FIXME for that reason.
+ */
+int
+child_thread_alive (gdb_tid)
+     lwpid_t gdb_tid;
+{
+   lwpid_t  tid;
+
+   /* This spins down the lists twice.
+    * Possible peformance improvement here!
+    */
+   tid = map_from_gdb_tid( gdb_tid );
+   return !is_terminated( tid );
+}
+
+#endif
+
+
+
+/* This function attempts to read the specified number of bytes from the
+   save_state_t that is our view into the hardware registers, starting at
+   ss_offset, and ending at ss_offset + sizeof_buf - 1
+
+   If this function succeeds, it deposits the fetched bytes into buf,
+   and returns 0.
+
+   If it fails, it returns a negative result.  The contents of buf are
+   undefined it this function fails.
+   */
+int
+read_from_register_save_state (tid, ss_offset, buf, sizeof_buf)
+    int  tid;
+    TTRACE_ARG_TYPE  ss_offset;
+    char *  buf;
+    int  sizeof_buf;
+{
+  int  tt_status;
+  register_value_t  register_value = 0;
+
+  tt_status = call_ttrace (TT_LWP_RUREGS,
+                           tid,
+                           ss_offset,
+                           (TTRACE_ARG_TYPE) sizeof_buf,
+                           (TTRACE_ARG_TYPE) buf);
+
+  if( tt_status == 1 )
+      /* Map ttrace's version of success to our version.
+       * Sometime ttrace returns 0, but that's ok here.
+       */
+      return 0;
+      
+  return tt_status;
+}
+
+
+/* This function attempts to write the specified number of bytes to the
+   save_state_t that is our view into the hardware registers, starting at
+   ss_offset, and ending at ss_offset + sizeof_buf - 1
+
+   If this function succeeds, it deposits the bytes in buf, and returns 0.
+
+   If it fails, it returns a negative result.  The contents of the save_state_t
+   are undefined it this function fails.
+   */
+int
+write_to_register_save_state (tid, ss_offset, buf, sizeof_buf)
+    int  tid;
+    TTRACE_ARG_TYPE  ss_offset;
+    char *  buf;
+    int  sizeof_buf;
+{
+  int  tt_status;
+  register_value_t  register_value = 0;
+
+  tt_status = call_ttrace (TT_LWP_WUREGS,
+                           tid,
+                           ss_offset,
+                           (TTRACE_ARG_TYPE) sizeof_buf,
+                           (TTRACE_ARG_TYPE) buf);
+  return tt_status;
+}
+
+
+/* This function is a sop to the largeish number of direct calls
+   to call_ptrace that exist in other files.  Rather than create
+   functions whose name abstracts away from ptrace, and change all
+   the present callers of call_ptrace, we'll do the expedient (and
+   perhaps only practical) thing.
+
+   Note HP-UX explicitly disallows a mix of ptrace & ttrace on a traced
+   process.  Thus, we must translate all ptrace requests into their
+   process-specific, ttrace equivalents.
+   */
+int
+call_ptrace (pt_request, gdb_tid, addr, data)
+     int               pt_request;
+     int               gdb_tid;
+     PTRACE_ARG3_TYPE  addr;
+     int               data;
+{
+  ttreq_t           tt_request;
+  TTRACE_ARG_TYPE   tt_addr = (TTRACE_ARG_TYPE) addr;
+  TTRACE_ARG_TYPE   tt_data = (TTRACE_ARG_TYPE) data;
+  TTRACE_ARG_TYPE   tt_addr2 = TT_NIL;
+  int               tt_status;
+  register_value_t  register_value;
+  int               read_buf;
+
+  /* Perform the necessary argument translation.  Note that some
+     cases are funky enough in the ttrace realm that we handle them
+     very specially.
+   */
+  switch (pt_request) {
+      /* The following cases cannot conveniently be handled conveniently
+         by merely adjusting the ptrace arguments and feeding into the
+         generic call to ttrace at the bottom of this function.
+
+         Note that because all branches of this switch end in "return",
+         there's no need for any "break" statements.
+         */
+      case PT_SETTRC :
+          return parent_attach_all ();
+          
+      case PT_RUREGS :
+          tt_status = read_from_register_save_state (gdb_tid,
+                                                     tt_addr,
+                                                     &register_value,
+                                                     sizeof (register_value));
+          if (tt_status < 0)
+            return tt_status;
+          return register_value;
+
+      case PT_WUREGS :
+          register_value = (int) tt_data;
+          tt_status = write_to_register_save_state (gdb_tid,
+                                                    tt_addr,
+                                                    &register_value,
+                                                    sizeof (register_value));
+          return tt_status;
+          break;
+
+      case PT_READ_I :
+          tt_status = call_ttrace (TT_PROC_RDTEXT,  /* Implicit 4-byte xfer becomes block-xfer. */
+                                   gdb_tid,
+                                   tt_addr,
+                                   (TTRACE_ARG_TYPE) 4,
+                                   (TTRACE_ARG_TYPE) &read_buf);
+          if (tt_status < 0)
+            return tt_status;
+          return read_buf;
+
+      case PT_READ_D :
+          tt_status = call_ttrace (TT_PROC_RDDATA,  /* Implicit 4-byte xfer becomes block-xfer. */
+                                   gdb_tid,
+                                   tt_addr,
+                                   (TTRACE_ARG_TYPE) 4,
+                                   (TTRACE_ARG_TYPE) &read_buf);
+          if (tt_status < 0)
+            return tt_status;
+          return read_buf;
+
+      case PT_ATTACH :
+          tt_status = call_real_ttrace (TT_PROC_ATTACH,
+                                        map_from_gdb_tid (gdb_tid),
+                                        (lwpid_t) TT_NIL,
+                                        tt_addr,
+                                        (TTRACE_ARG_TYPE) TT_VERSION,
+                                        tt_addr2);
+          if (tt_status < 0)
+            return tt_status;
+          return tt_status;
+
+      /* The following cases are handled by merely adjusting the ptrace
+         arguments and feeding into the generic call to ttrace.
+         */
+      case PT_DETACH :
+          tt_request = TT_PROC_DETACH;
+          break;
+
+      case PT_WRITE_I :
+          tt_request = TT_PROC_WRTEXT;  /* Translates 4-byte xfer to block-xfer. */
+          tt_data = 4;                  /* This many bytes. */
+          tt_addr2 = (TTRACE_ARG_TYPE) &data;  /* Address of xfer source. */
+          break;
+
+      case PT_WRITE_D :
+          tt_request = TT_PROC_WRDATA;  /* Translates 4-byte xfer to block-xfer. */
+          tt_data = 4;                  /* This many bytes. */
+          tt_addr2 = (TTRACE_ARG_TYPE) &data;  /* Address of xfer source. */
+          break;
+
+      case PT_RDTEXT :
+          tt_request = TT_PROC_RDTEXT;
+          break;
+
+      case PT_RDDATA :
+          tt_request = TT_PROC_RDDATA;
+          break;
+
+      case PT_WRTEXT :
+          tt_request = TT_PROC_WRTEXT;
+          break;
+
+      case PT_WRDATA :
+          tt_request = TT_PROC_WRDATA;
+          break;
+
+      case PT_CONTINUE :
+          tt_request = TT_PROC_CONTINUE;
+          break;
+
+      case PT_STEP :
+          tt_request = TT_LWP_SINGLE;  /* Should not be making this request? */
+          break;
+
+      case PT_KILL :
+          tt_request = TT_PROC_EXIT;
+          break;
+
+      case PT_GET_PROCESS_PATHNAME :
+          tt_request = TT_PROC_GET_PATHNAME;
+          break;
+
+      default :
+          tt_request = pt_request;  /* Let ttrace be the one to complain. */
+          break;
+  }
+
+  return call_ttrace (tt_request,
+                      gdb_tid,
+                      tt_addr,
+                      tt_data,
+                      tt_addr2);
+}
+
+/* Kill that pesky process!
+ */
+void
+kill_inferior ()
+{
+  int  tid;
+  int  wait_status;
+  thread_info *  t;
+  thread_info **paranoia;
+  int           para_count, i;
+
+  if (inferior_pid == 0)
+    return;
+
+  /* Walk the list of "threads", some of which are "pseudo threads",
+     aka "processes".  For each that is NOT inferior_pid, stop it,
+     and detach it.
+
+     You see, we may not have just a single process to kill.  If we're
+     restarting or quitting or detaching just after the inferior has
+     forked, then we've actually two processes to clean up.
+
+     But we can't just call target_mourn_inferior() for each, since that
+     zaps the target vector.
+     */
+
+  paranoia = (thread_info **) malloc( thread_head.count *
+                                      sizeof(thread_info *));
+  para_count = 0;
+  
+  t = thread_head.head;
+  while (t) {
+  
+    paranoia[ para_count ] = t;
+    for( i = 0; i < para_count; i++ ){
+        if( t->next == paranoia[i] ) {
+            warning( "Bad data in gdb's thread data; repairing." );
+            t->next = 0;
+        }
+    }
+    para_count++;
+
+    if (t->am_pseudo && (t->pid != inferior_pid))
+      {
+        /* TT_PROC_STOP doesn't require a subsequent ttrace_wait, as it
+         * generates no event.
+         */
+        call_ttrace (TT_PROC_STOP,
+                     t->pid,
+                     TT_NIL,
+                     TT_NIL,
+                     TT_NIL);
+
+        call_ttrace (TT_PROC_DETACH,
+                     t->pid,
+                     TT_NIL,
+                     (TTRACE_ARG_TYPE) TARGET_SIGNAL_0,
+                     TT_NIL);
+      }
+    t = t->next;
+  }
+
+  free( paranoia );
+  
+  call_ttrace (TT_PROC_STOP,
+               inferior_pid,
+               TT_NIL,
+               TT_NIL,
+               TT_NIL);
+  target_mourn_inferior ();
+  clear_thread_info();
+}
+
+
+#ifndef CHILD_RESUME
+
+/* Sanity check a thread about to be continued.
+ */
+static void
+thread_dropping_event_check( p )
+    thread_info *p;
+{
+    if( !p->handled ) {
+        /*
+         * This seems to happen when we "next" over a
+         * "fork()" while following the parent.  If it's
+         * the FORK event, that's ok.  If it's a SIGNAL
+         * in the unfollowed child, that's ok to--but
+         * how can we know that's what's going on?
+         *
+         * FIXME!
+         */
+         if( p->have_state ) {
+             if( p->last_stop_state.tts_event == TTEVT_FORK ) {
+                 /* Ok */
+                 ;
+             }
+             else if( p->last_stop_state.tts_event == TTEVT_SIGNAL ) {
+                 /* Ok, close eyes and let it happen.
+                  */
+                 ;
+             }
+             else {
+                 /* This shouldn't happen--we're dropping a
+                  * real event.
+                  */
+                 warning( "About to continue process %d, thread %d with unhandled event %s.",
+                         p->pid, p->tid,
+                         get_printable_name_of_ttrace_event(
+                                   p->last_stop_state.tts_event ));
+
+#ifdef PARANOIA
+                 if( debug_on )
+                     print_tthread( p );
+#endif
+            }
+        }
+        else {
+            /* No saved state, have to assume it failed.
+             */
+            warning( "About to continue process %d, thread %d with unhandled event.",
+                     p->pid, p->tid );
+#ifdef PARANOIA
+            if( debug_on )
+                print_tthread( p );
+#endif
+        }
+    }
+    
+}   /* thread_dropping_event_check */
+
+/* Use a loop over the threads to continue all the threads but
+ * the one specified, which is to be stepped.
+ */
+static void
+threads_continue_all_but_one( gdb_tid, signal )
+    lwpid_t gdb_tid;
+    int     signal;
+{
+    thread_info  *p;
+    int           thread_signal;
+    lwpid_t       real_tid;
+    lwpid_t       scan_tid;
+    ttstate_t     state;
+    int           real_pid;
+    
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        printf( "Using loop over threads to step/resume with signals\n" );
+#endif
+
+    /* First update the thread list.
+     */
+    set_all_unseen();
+    real_tid = map_from_gdb_tid( gdb_tid );
+    real_pid = get_pid_for( real_tid );
+    
+    scan_tid = get_process_first_stopped_thread_id( real_pid, &state );
+    while ( 0 != scan_tid ) {
+    
+#ifdef THREAD_DEBUG
+        /* FIX: later should check state is stopped;
+         * state.tts_flags & TTS_STATEMASK == TTS_WASSUSPENDED
+         */
+        if( debug_on )
+            if( state.tts_flags & TTS_STATEMASK != TTS_WASSUSPENDED )
+                printf( "About to continue non-stopped thread %d\n", scan_tid );
+#endif
+
+        p = find_thread_info( scan_tid );
+        if( NULL == p ) {
+            add_tthread( real_pid, scan_tid );
+            p = find_thread_info( scan_tid );
+
+            /* This is either a newly-created thread or the
+             * result of a fork; in either case there's no
+             * actual event to worry about.
+             */
+            p->handled = 1;
+
+            if( state.tts_event != TTEVT_NONE ) {
+                /* Oops, do need to worry!
+                 */
+                warning( "Unexpected thread with \"%s\" event.",
+                    get_printable_name_of_ttrace_event( state.tts_event ));
+            }
+        }
+        else if( scan_tid != p->tid )
+            error( "Bad data in thread database." );
+
+#ifdef THREAD_DEBUG
+        if( debug_on )
+            if( p->terminated )
+                printf( "Why are we continuing a dead thread?\n" );
+#endif
+
+        p->seen = 1;
+            
+        scan_tid = get_process_next_stopped_thread_id( real_pid, &state );
+    }
+
+    /* Remove unseen threads.
+     */
+    update_thread_list();
+
+    /* Now run down the thread list and continue or step.
+     */
+    for( p = thread_head.head; p; p = p->next ) {
+
+        /* Sanity check.
+         */
+        thread_dropping_event_check( p );
+
+        /* Pass the correct signals along.
+         */
+        if( p->have_signal ) {
+            thread_signal  = p->signal_value;
+            p->have_signal = 0;
+        }
+        else
+            thread_signal = 0;
+             
+        if( p->tid != real_tid ) {
+            /*
+             * Not the thread of interest, so continue it
+             * as the user expects.
+             */
+            if( p->stepping_mode == DO_STEP ) {
+                /* Just step this thread.
+                 */
+                call_ttrace(
+                     TT_LWP_SINGLE,
+                     p->tid,
+                     TT_USE_CURRENT_PC,
+                     (TTRACE_ARG_TYPE) target_signal_to_host( signal ),
+                     TT_NIL );
+            }
+            else {
+                /* Regular continue (default case).
+                 */
+                call_ttrace(
+                         TT_LWP_CONTINUE,
+                         p->tid,
+                         TT_USE_CURRENT_PC,
+                         (TTRACE_ARG_TYPE) target_signal_to_host( thread_signal ),
+                         TT_NIL );
+            }
+        }
+        else {
+           /* Step the thread of interest.
+            */
+            call_ttrace(
+                     TT_LWP_SINGLE,
+                     real_tid,
+                     TT_USE_CURRENT_PC,
+                     (TTRACE_ARG_TYPE) target_signal_to_host( signal ),
+                     TT_NIL );
+        }   
+    }   /* Loop over threads */
+}   /* End threads_continue_all_but_one */
+
+/* Use a loop over the threads to continue all the threads.
+ * This is done when a signal must be sent to any of the threads.
+ */
+static void
+threads_continue_all_with_signals( gdb_tid, signal )
+    lwpid_t gdb_tid;
+    int     signal;
+{
+    thread_info  *p;
+    int           thread_signal;
+    lwpid_t       real_tid;
+    lwpid_t       scan_tid;
+    ttstate_t     state;
+    int           real_pid;
+
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        printf( "Using loop over threads to resume with signals\n" );
+#endif
+
+    /* Scan and update thread list.
+     */
+    set_all_unseen();
+    real_tid = map_from_gdb_tid( gdb_tid ); 
+    real_pid = get_pid_for( real_tid );
+
+    scan_tid = get_process_first_stopped_thread_id( real_pid, &state );
+    while ( 0 != scan_tid ) {
+    
+#ifdef THREAD_DEBUG
+        if( debug_on )
+            if( state.tts_flags & TTS_STATEMASK != TTS_WASSUSPENDED )
+                warning( "About to continue non-stopped thread %d\n", scan_tid );
+#endif
+
+        p = find_thread_info( scan_tid );
+        if( NULL == p ) {
+            add_tthread( real_pid, scan_tid );
+            p = find_thread_info( scan_tid );
+
+            /* This is either a newly-created thread or the
+             * result of a fork; in either case there's no
+             * actual event to worry about.
+             */
+            p->handled = 1;
+
+            if( state.tts_event != TTEVT_NONE ) {
+                /* Oops, do need to worry!
+                 */
+                warning( "Unexpected thread with \"%s\" event.",
+                    get_printable_name_of_ttrace_event( state.tts_event ));
+            }
+        }
+
+#ifdef THREAD_DEBUG
+        if( debug_on )
+            if( p->terminated )
+                printf( "Why are we continuing a dead thread? (1)\n" );
+#endif
+
+        p->seen = 1;
+
+        scan_tid = get_process_next_stopped_thread_id( real_pid, &state );
+    }
+
+    /* Remove unseen threads from our list.
+     */
+    update_thread_list();
+
+    /* Continue the threads.
+     */
+    for( p = thread_head.head; p; p = p->next ) {
+
+        /* Sanity check.
+         */
+        thread_dropping_event_check( p );
+
+        /* Pass the correct signals along.
+         */
+        if( p->tid == real_tid ) {
+            thread_signal  = signal;
+            p->have_signal = 0;
+        }
+        else if( p->have_signal ) {
+            thread_signal  = p->signal_value;
+            p->have_signal = 0;
+        }
+        else
+            thread_signal  = 0;
+
+        if( p->stepping_mode == DO_STEP ) {
+            call_ttrace(
+                     TT_LWP_SINGLE,
+                     p->tid,
+                     TT_USE_CURRENT_PC,
+                     (TTRACE_ARG_TYPE) target_signal_to_host( signal ),
+                     TT_NIL );
+        }
+        else {
+            /* Continue this thread (default case).
+             */
+            call_ttrace(
+                    TT_LWP_CONTINUE,
+                    p->tid,
+                    TT_USE_CURRENT_PC,
+                    (TTRACE_ARG_TYPE) target_signal_to_host( thread_signal ),
+                    TT_NIL );
+        }
+    }
+}   /* End threads_continue_all_with_signals */
+
+/* Step one thread only.  
+ */
+static void
+thread_fake_step( tid, signal )
+    lwpid_t            tid;
+    enum target_signal signal;
+{
+    thread_info *p;
+
+#ifdef THREAD_DEBUG
+    if( debug_on ) {
+        printf( "Doing a fake-step over a bpt, etc. for %d\n", tid );
+
+        if( is_terminated( tid ))
+            printf( "Why are we continuing a dead thread? (4)\n" );
+    }
+#endif
+          
+    if( doing_fake_step )
+        warning( "Step while step already in progress." );
+
+    /* See if there's a saved signal value for this
+     * thread to be passed on, but no current signal.
+     */
+    p = find_thread_info( tid );
+    if( p != NULL ) {
+        if( p->have_signal && signal == NULL ) {
+            /* Pass on a saved signal.
+             */
+            signal = p->signal_value;
+        }
+        
+        p->have_signal  = 0;
+    }
+
+    if( !p->handled )
+        warning( "Internal error: continuing unhandled thread." );
+        
+    call_ttrace( TT_LWP_SINGLE,
+                 tid,
+                 TT_USE_CURRENT_PC,
+                 (TTRACE_ARG_TYPE) target_signal_to_host (signal),
+                 TT_NIL );
+
+    /* Do bookkeeping so "call_ttrace_wait" knows it has to wait
+     * for this thread only, and clear any saved signal info.
+     */
+    doing_fake_step   = 1;
+    fake_step_tid     = tid;
+
+}   /* End thread_fake_step */
+
+/* Continue one thread when a signal must be sent to it.
+ */
+static void
+threads_continue_one_with_signal( gdb_tid, signal )
+    lwpid_t gdb_tid;
+    int     signal;
+{
+    thread_info  *p;
+    lwpid_t       real_tid;
+    int           real_pid;
+    
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        printf( "Continuing one thread with a signal\n" );
+#endif
+
+    real_tid = map_from_gdb_tid( gdb_tid );
+    real_pid = get_pid_for( real_tid );
+
+    p = find_thread_info( real_tid );
+    if( NULL == p ) {
+        add_tthread( real_pid, real_tid );
+    }
+
+#ifdef THREAD_DEBUG
+    if( debug_on )
+        if( p->terminated )
+            printf( "Why are we continuing a dead thread? (2)\n" );
+#endif
+
+    if( !p->handled )
+        warning( "Internal error: continuing unhandled thread." );
+        
+    p->have_signal = 0;
+             
+    call_ttrace( TT_LWP_CONTINUE,
+                 gdb_tid,
+                 TT_USE_CURRENT_PC,
+                 (TTRACE_ARG_TYPE) target_signal_to_host( signal ),
+                 TT_NIL );
+}
+#endif
+
+#ifndef CHILD_RESUME
+
+/* Resume execution of the inferior process.
+ *
+ * This routine is in charge of setting the "handled" bits. 
+ *
+ *   If STEP is zero,      continue it.
+ *   If STEP is nonzero,   single-step it.
+ *   
+ *   If SIGNAL is nonzero, give it that signal.
+ *
+ *   If TID is -1,         apply to all threads.
+ *   If TID is not -1,     apply to specified thread.
+ *   
+ *           STEP
+ *      \      !0                        0
+ *  TID  \________________________________________________
+ *       |
+ *   -1  |   Step current            Continue all threads
+ *       |   thread and              (but which gets any
+ *       |   continue others         signal?--We look at
+ *       |                           "inferior_pid")
+ *       |
+ *    N  |   Step _this_ thread      Continue _this_ thread
+ *       |   and leave others        and leave others 
+ *       |   stopped; internally     stopped; used only for
+ *       |   used by gdb, never      hardware watchpoints
+ *       |   a user command.         and attach, never a
+ *       |                           user command.
+ */
+void
+child_resume( gdb_tid, step, signal )
+     lwpid_t gdb_tid;
+     int     step;
+     enum target_signal signal;
+{
+  int     resume_all_threads;
+  lwpid_t tid;
+  process_state_t  new_process_state;
+
+  resume_all_threads =
+    (gdb_tid == INFTTRACE_ALL_THREADS) ||
+    (vfork_in_flight);
+
+  if (resume_all_threads) {
+    /* Resume all threads, but first pick a tid value
+     * so we can get the pid when in call_ttrace doing
+     * the map.
+     */
+    if (vfork_in_flight)
+        tid = vforking_child_pid;
+    else
+        tid = map_from_gdb_tid( inferior_pid );
+  }
+  else
+      tid = map_from_gdb_tid( gdb_tid );
+
+#ifdef THREAD_DEBUG
+  if( debug_on ) {
+      if( more_events_left )
+          printf( "More events; " );
+
+      if( signal != 0 )
+          printf( "Sending signal %d; ", signal );
+      
+      if( resume_all_threads ) {
+          if( step == 0 )
+              printf( "Continue process %d\n", tid );
+          else
+              printf( "Step/continue thread %d\n", tid );
+      }
+      else {
+          if( step == 0 )
+              printf( "Continue thread %d\n", tid );
+          else
+              printf( "Step just thread %d\n", tid );
+      }
+
+      if( vfork_in_flight )
+          printf( "Vfork in flight\n" );
+  }
+#endif
+
+  if( process_state == RUNNING )
+      warning( "Internal error in resume logic; doing resume or step anyway." );
+      
+  if(   !step                    /* Asked to continue...       */
+     && resume_all_threads       /* whole process..            */
+     && signal != 0              /* with a signal...           */
+     && more_events_left > 0 ) { /* but we can't yet--save it! */
+
+      /* Continue with signal means we have to set the pending
+       * signal value for this thread.
+       */
+      thread_info *k;
+      
+#ifdef THREAD_DEBUG
+      if( debug_on )
+           printf( "Saving signal %d for thread %d\n", signal, tid );
+#endif
+
+       k = find_thread_info( tid );
+       if( k != NULL ) {
+           k->have_signal  = 1;
+           k->signal_value = signal;
+
+#ifdef THREAD_DEBUG
+           if( debug_on )
+               if( k->terminated )
+                   printf( "Why are we continuing a dead thread? (3)\n" );
+#endif
+
+       }
+
+#ifdef THREAD_DEBUG
+       else if( debug_on ) {
+           printf( "No thread info for tid %d\n", tid );
+       }
+#endif
+  }
+
+  /* Are we faking this "continue" or "step"?
+   *
+   * We used to do steps by continuing all the threads for 
+   * which the events had been handled already.  While
+   * conceptually nicer (hides it all in a lower level), this
+   * can lead to starvation and a hang (e.g. all but one thread
+   * are unhandled at a breakpoint just before a "join" operation,
+   * and one thread is in the join, and the user wants to step that
+   * thread).
+   */
+  if( resume_all_threads       /* Whole process, therefore user command */
+   && more_events_left > 0 ) { /* But we can't do this yet--fake it! */
+      thread_info *p;
+      
+      if( !step ) {
+          /* No need to do any notes on a per-thread
+           * basis--we're done!
+           */
+#ifdef WAIT_BUFFER_DEBUG
+          if( debug_on )
+              printf( "Faking a process resume.\n" );
+#endif
+
+          return;
+      }
+      else {
+
+#ifdef WAIT_BUFFER_DEBUG
+          if( debug_on )
+              printf( "Faking a process step.\n" );
+#endif
+
+      }
+      
+      p = find_thread_info( tid );
+      if( p == NULL ) {
+          warning( "No thread information for tid %d, 'next' command ignored.\n", tid );
+          return;
+      }
+      else {
+
+#ifdef THREAD_DEBUG
+          if( debug_on )
+              if( p->terminated )
+                  printf( "Why are we continuing a dead thread? (3.5)\n" );
+#endif
+
+          if( p->stepping_mode != DO_DEFAULT ) {
+              warning( "Step or continue command applied to thread which is already stepping or continuing; command ignored." );
+
+              return;
+          }
+
+          if( step )
+              p->stepping_mode = DO_STEP;
+          else
+              p->stepping_mode = DO_CONTINUE;
+
+          return;
+      }   /* Have thread info */
+  }   /* Must fake step or go */
+
+  /* Execept for fake-steps, from here on we know we are
+   * going to wind up with a running process which will
+   * need a real wait.
+   */
+  new_process_state = RUNNING;
+
+  /* An address of TT_USE_CURRENT_PC tells ttrace to continue from where
+   * it was.  (If GDB wanted it to start some other way, we have already
+   * written a new PC value to the child.)
+   *
+   * If this system does not support PT_STEP, a higher level function will
+   * have called single_step() to transmute the step request into a
+   * continue request (by setting breakpoints on all possible successor
+   * instructions), so we don't have to worry about that here.
+   */
+  if (step) {
+      if( resume_all_threads ) {
+          /*
+           * Regular user step: other threads get a "continue".
+           */
+          threads_continue_all_but_one( tid, signal );
+          clear_all_handled();
+          clear_all_stepping_mode();
+      }
+
+      else {
+          /* "Fake step": gdb is stepping one thread over a
+           * breakpoint, watchpoint, or out of a library load
+           * event, etc.  The rest just stay where they are.
+           *
+           * Also used when there are pending events: we really
+           * step the current thread, but leave the rest stopped.
+           * Users can't request this, but "wait_for_inferior"
+           * does--a lot!
+           */
+          thread_fake_step( tid, signal );
+
+          /* Clear the "handled" state of this thread, because
+           * we'll soon get a new event for it.  Other events
+           * stay as they were.
+           */
+          clear_handled( tid );
+          clear_stepping_mode( tid );
+          new_process_state = FAKE_STEPPING;
+      }
+  }
+  
+  else {
+      /* TT_LWP_CONTINUE can pass signals to threads,
+       * TT_PROC_CONTINUE can't.  So if there are any
+       * signals to pass, we have to use the (slower)
+       * loop over the stopped threads.
+       *
+       * Equally, if we have to not continue some threads,
+       * due to saved events, we have to use the loop.
+       */
+      if( (signal != 0) || saved_signals_exist()) {
+          if( resume_all_threads ) {
+
+#ifdef THREAD_DEBUG
+              if( debug_on )
+                  printf( "Doing a continue by loop of all threads\n" );
+#endif
+
+              threads_continue_all_with_signals( tid, signal );
+
+              clear_all_handled();
+              clear_all_stepping_mode();
+          }
+
+          else {
+#ifdef THREAD_DEBUG
+              printf( "Doing a continue w/signal of just thread %d\n", tid );
+#endif
+
+              threads_continue_one_with_signal( tid, signal );
+
+              /* Clear the "handled" state of this thread, because
+               * we'll soon get a new event for it.  Other events
+               * can stay as they were.
+               */
+              clear_handled( tid );
+              clear_stepping_mode( tid );
+          }
+      }
+
+      else {
+          /* No signals to send.
+           */
+          if( resume_all_threads ) {
+#ifdef THREAD_DEBUG
+              if( debug_on )
+                  printf( "Doing a continue by process of process %d\n", tid );
+#endif
+
+              if( more_events_left > 0 ) {
+                  warning( "Losing buffered events on continue." );
+                  more_events_left = 0;
+              }
+
+              call_ttrace( TT_PROC_CONTINUE,
+                           tid,
+                           TT_NIL,
+                           TT_NIL,
+                           TT_NIL );
+
+              clear_all_handled();
+              clear_all_stepping_mode();
+          }
+
+          else {
+#ifdef THREAD_DEBUG
+              if( debug_on ) {
+                  printf( "Doing a continue of just thread %d\n", tid );
+                  if( is_terminated( tid ))
+                       printf( "Why are we continuing a dead thread? (5)\n" );
+              }
+#endif
+
+              call_ttrace( TT_LWP_CONTINUE,
+                           tid,
+                           TT_NIL,
+                           TT_NIL,
+                           TT_NIL );
+
+              /* Clear the "handled" state of this thread, because
+               * we'll soon get a new event for it.  Other events
+               * can stay as they were.
+               */
+              clear_handled( tid );
+              clear_stepping_mode( tid );
+          }
+      }
+  }
+
+  process_state = new_process_state;
+
+#ifdef WAIT_BUFFER_DEBUG
+  if( debug_on )
+      printf( "Process set to %s\n",
+              get_printable_name_of_process_state (process_state) );
+#endif
+
+}
+#endif /* CHILD_RESUME */
+
+
+#ifdef ATTACH_DETACH
+/*
+ * Like it says.
+ *
+ * One worry is that we may not be attaching to "inferior_pid"
+ * and thus may not want to clear out our data.  FIXME?
+ * 
+ */
+static void
+update_thread_state_after_attach( pid, kind_of_go )
+  int               pid;
+  attach_continue_t kind_of_go;
+{
+  int        tt_status;
+  ttstate_t  thread_state;
+  lwpid_t    a_thread;
+  lwpid_t    tid;
+
+  /* The process better be stopped.
+   */
+  if( process_state != STOPPED
+   && process_state != VFORKING )
+      warning( "Internal error attaching." );
+
+  /* Clear out old tthread info and start over.  This has the
+   * side effect of ensuring that the TRAP is reported as being
+   * in the right thread (re-mapped from tid to pid).
+   *
+   * It's because we need to add the tthread _now_ that we
+   * need to call "clear_thread_info" _now_, and that's why
+   * "require_notification_of_events" doesn't clear the thread
+   * info (it's called later than this routine).
+   */
+  clear_thread_info();
+  a_thread = 0;
+
+  for (tid = get_process_first_stopped_thread_id (pid, &thread_state);
+       tid != 0;
+       tid = get_process_next_stopped_thread_id (pid, &thread_state))
+    {
+      thread_info *p;
+    
+      if (a_thread == 0)
+        {
+          a_thread = tid;
+#ifdef THREAD_DEBUG
+          if( debug_on )
+              printf( "Attaching to process %d, thread %d\n",
+                      pid, a_thread );
+#endif
+        }
+
+      /* Tell ourselves and the "rest of gdb" that this thread
+       * exists.
+       *
+       * This isn't really a hack.  Other thread-based versions
+       * of gdb (e.g. gnu-nat.c) seem to do the same thing.
+       *
+       * We don't need to do mapping here, as we know this
+       * is the first thread and thus gets the real pid
+       * (and is "inferior_pid").
+       *
+       * NOTE: it probably isn't the originating thread,
+       *       but that doesn't matter (we hope!).
+       */
+      add_tthread( pid, tid );
+      p = find_thread_info( tid );
+      if( NULL == p ) /* ?We just added it! */
+          error( "Internal error adding a thread on attach." );
+          
+      copy_ttstate_t( &p->last_stop_state, thread_state );
+      p->have_state = 1;
+      
+      if( DO_ATTACH_CONTINUE == kind_of_go ) {
+          /*
+           * If we are going to CONTINUE afterwards,
+           * raising a SIGTRAP, don't bother trying to
+           * handle this event.  But check first!
+           */
+          switch( p->last_stop_state.tts_event ) {
+
+          case TTEVT_NONE:
+             /* Ok to set this handled.
+              */
+              break;
+
+          default:
+              warning( "Internal error; skipping event %s on process %d, thread %d.",
+                  get_printable_name_of_ttrace_event(
+                       p->last_stop_state.tts_event ),
+                  p->pid, p->tid);
+          }
+
+          set_handled( pid, tid );
+
+      }
+      else {
+          /* There will be no "continue" opertion, so the
+           * process remains stopped.  Don't set any events
+           * handled except the "gimmies".
+           */
+          switch( p->last_stop_state.tts_event ) {
+
+          case TTEVT_NONE:
+              /* Ok to ignore this.
+               */
+              set_handled( pid, tid );
+              break;
+
+          case TTEVT_EXEC:
+          case TTEVT_FORK:
+              /* Expected "other" FORK or EXEC event from a
+               * fork or vfork.
+               */
+              break;
+
+          default:
+              printf( "Internal error: failed to handle event %s on process %d, thread %d.",
+                  get_printable_name_of_ttrace_event(
+                       p->last_stop_state.tts_event ),
+                  p->pid, p->tid);
+          }
+      }
+      
+      add_thread( tid );       /* in thread.c */
+    }
+ 
+#ifdef PARANOIA
+    if( debug_on )
+        print_tthreads();
+#endif
+
+  /* One mustn't call ttrace_wait() after attaching via ttrace,
+     'cause the process is stopped already.
+     
+     However, the upper layers of gdb's execution control will
+     want to wait after attaching (but not after forks, in
+     which case they will be doing a "target_resume", anticipating
+     a later TTEVT_EXEC or TTEVT_FORK event).
+
+     To make this attach() implementation more compatible with
+     others, we'll make the attached-to process raise a SIGTRAP.
+
+     Issue: this continues only one thread.  That could be
+     dangerous if the thread is blocked--the process won't run
+     and no trap will be raised.  FIX! (check state.tts_flags?
+     need one that's either TTS_WASRUNNING--but we've stopped
+     it and made it TTS_WASSUSPENDED.  Hum...FIXME!)
+   */
+  if( DO_ATTACH_CONTINUE == kind_of_go ) {
+      tt_status = call_real_ttrace(
+                      TT_LWP_CONTINUE,
+                      pid,
+                      a_thread,
+                      TT_USE_CURRENT_PC,
+                      (TTRACE_ARG_TYPE) target_signal_to_host (TARGET_SIGNAL_TRAP),
+                      TT_NIL);
+      if (errno)
+          perror_with_name ("ttrace");
+
+      clear_handled( a_thread );  /* So TRAP will be reported. */
+
+      /* Now running.
+       */
+      process_state = RUNNING;
+  }
+
+  attach_flag = 1;
+}
+#endif /* ATTACH_DETACH */
+
+
+#ifdef ATTACH_DETACH
+/* Start debugging the process whose number is PID.
+ * (A _real_ pid).
+ */
+int
+attach( pid )
+     int pid;
+{
+  int       tt_status;
+  
+  tt_status = call_real_ttrace (
+                           TT_PROC_ATTACH,
+                           pid,
+                           (lwpid_t) TT_NIL,
+                           TT_NIL,
+                           (TTRACE_ARG_TYPE) TT_VERSION,
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace attach");
+
+  /* If successful, the process is now stopped.
+   */
+  process_state = STOPPED;
+
+  /* Our caller ("attach_command" in "infcmd.c")
+   * expects to do a "wait_for_inferior" after
+   * the attach, so make sure the inferior is
+   * running when we're done.
+   */
+  update_thread_state_after_attach( pid, DO_ATTACH_CONTINUE );
+
+  return pid;
+}
+
+
+#if defined(CHILD_POST_ATTACH)
+void
+child_post_attach (pid)
+  int  pid;
+{
+#ifdef THREAD_DEBUG
+  if( debug_on )
+      printf( "child-post-attach call\n" );
+#endif
+
+  require_notification_of_events (pid);
+}
+#endif
+
+
+/* Stop debugging the process whose number is PID
+   and continue it with signal number SIGNAL.
+   SIGNAL = 0 means just continue it.
+ */
+void
+detach( signal )
+     int signal;
+{
+  errno = 0;
+  call_ttrace (TT_PROC_DETACH,
+               inferior_pid,
+               TT_NIL,
+               (TTRACE_ARG_TYPE) signal,
+               TT_NIL);
+  attach_flag = 0;
+
+  clear_thread_info();
+
+  /* Process-state? */
+}
+#endif /* ATTACH_DETACH */
+
+
+/* Default the type of the ttrace transfer to int.  */
+#ifndef TTRACE_XFER_TYPE
+#define TTRACE_XFER_TYPE int
+#endif
+
+void
+_initialize_kernel_u_addr ()
+{
+}
+
+#if !defined (CHILD_XFER_MEMORY)
+/* NOTE! I tried using TTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_TTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.   Copy to inferior if
+   WRITE is nonzero.
+  
+   Returns the length copied, which is either the LEN argument or zero.
+   This xfer function does not do partial moves, since child_ops
+   doesn't allow memory operations to cross below us in the target stack
+   anyway.  */
+
+int
+child_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & - sizeof (TTRACE_XFER_TYPE);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+    = (((memaddr + len) - addr) + sizeof (TTRACE_XFER_TYPE) - 1)
+      / sizeof (TTRACE_XFER_TYPE);
+  /* Allocate buffer of that many longwords.  */
+  register TTRACE_XFER_TYPE *buffer
+    = (TTRACE_XFER_TYPE *) alloca (count * sizeof (TTRACE_XFER_TYPE));
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int) sizeof (TTRACE_XFER_TYPE)) {
+	/* Need part of initial word -- fetch it.  */
+        buffer[0] = call_ttrace (TT_LWP_RDTEXT,
+                                 inferior_pid,
+                                 (TTRACE_ARG_TYPE) addr,
+                                 TT_NIL,
+                                 TT_NIL);
+      }
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1] = call_ttrace (TT_LWP_RDTEXT,
+                                           inferior_pid,
+                                           ((TTRACE_ARG_TYPE)
+                                            (addr + (count - 1) * sizeof (TTRACE_XFER_TYPE))),
+                                           TT_NIL,
+                                           TT_NIL);
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (TTRACE_XFER_TYPE) - 1)),
+	      myaddr,
+	      len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (TTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  call_ttrace (TT_LWP_WRDATA,
+                       inferior_pid,
+                       (TTRACE_ARG_TYPE) addr,
+                       (TTRACE_ARG_TYPE) buffer[i],
+                       TT_NIL);
+	  if (errno)
+	    {
+	      /* Using the appropriate one (I or D) is necessary for
+		 Gould NP1, at least.  */
+	      errno = 0;
+	      call_ttrace (TT_LWP_WRTEXT,
+                           inferior_pid,
+                           (TTRACE_ARG_TYPE) addr,
+                           (TTRACE_ARG_TYPE) buffer[i],
+                           TT_NIL);
+	    }
+	  if (errno)
+	    return 0;
+	}
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (TTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  buffer[i] = call_ttrace (TT_LWP_RDTEXT,
+                                   inferior_pid,
+                                   (TTRACE_ARG_TYPE) addr,
+                                   TT_NIL,
+                                   TT_NIL);
+	  if (errno)
+	    return 0;
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr,
+	      (char *) buffer + (memaddr & (sizeof (TTRACE_XFER_TYPE) - 1)),
+	      len);
+    }
+  return len;
+}
+
+
+static void
+udot_info ()
+{
+  int udot_off;		/* Offset into user struct */
+  int udot_val;		/* Value from user struct at udot_off */
+  char mess[128];	/* For messages */
+
+   if (!target_has_execution)
+     {
+       error ("The program is not being run.");
+     }
+
+#if !defined (KERNEL_U_SIZE)
+
+  /* Adding support for this command is easy.  Typically you just add a
+     routine, called "kernel_u_size" that returns the size of the user
+     struct, to the appropriate *-nat.c file and then add to the native
+     config file "#define KERNEL_U_SIZE kernel_u_size()" */
+  error ("Don't know how large ``struct user'' is in this version of gdb.");
+
+#else
+
+  for (udot_off = 0; udot_off < KERNEL_U_SIZE; udot_off += sizeof (udot_val))
+    {
+      if ((udot_off % 24) == 0)
+	{
+	  if (udot_off > 0)
+	    {
+	      printf_filtered ("\n");
+	    }
+	  printf_filtered ("%04x:", udot_off);
+	}
+      udot_val = call_ttrace (TT_LWP_RUREGS,
+                              inferior_pid,
+                              (TTRACE_ARG_TYPE) udot_off,
+                              TT_NIL,
+                              TT_NIL);
+      if (errno != 0)
+	{
+	  sprintf (mess, "\nreading user struct at offset 0x%x", udot_off);
+	  perror_with_name (mess);
+	}
+      /* Avoid using nonportable (?) "*" in print specs */
+      printf_filtered (sizeof (int) == 4 ? " 0x%08x" : " 0x%16x", udot_val);
+    }
+  printf_filtered ("\n");
+
+#endif
+}
+#endif /* !defined (CHILD_XFER_MEMORY).  */
+
+/* TTrace version of "target_pid_to_exec_file"
+ */
+char *
+child_pid_to_exec_file (tid)
+    int  tid;
+{
+  static char  exec_file_buffer[1024];
+  int  tt_status;
+  CORE_ADDR  top_of_stack;
+  char  four_chars[4];
+  int  name_index;
+  int  i;
+  int  done;
+  int  saved_inferior_pid;
+  
+  /* As of 10.x HP-UX, there's an explicit request to get the
+   *pathname.
+   */
+  tt_status = call_ttrace (TT_PROC_GET_PATHNAME,
+                           tid,
+                           (TTRACE_ARG_TYPE) exec_file_buffer,
+                           (TTRACE_ARG_TYPE) sizeof (exec_file_buffer) - 1,
+                           TT_NIL);
+  if (tt_status >= 0)
+    return exec_file_buffer;
+
+  /* ??rehrauer: The above request may or may not be broken.  It
+     doesn't seem to work when I use it.  But, it may be designed
+     to only work immediately after an exec event occurs.  (I'm
+     waiting for COSL to explain.)
+
+     In any case, if it fails, try a really, truly amazingly gross
+     hack that DDE uses, of pawing through the process' data
+     segment to find the pathname.
+     */
+  top_of_stack = 0x7b03a000;
+  name_index = 0;
+  done = 0;
+
+  /* On the chance that pid != inferior_pid, set inferior_pid
+     to pid, so that (grrrr!) implicit uses of inferior_pid get
+     the right id.
+     */
+  saved_inferior_pid = inferior_pid;
+  inferior_pid = tid;
+
+  /* Try to grab a null-terminated string. */
+  while (! done) {
+    if (target_read_memory (top_of_stack, four_chars, 4) != 0)
+      {
+        inferior_pid = saved_inferior_pid;
+        return NULL;
+      }
+    for (i = 0; i < 4; i++) {
+      exec_file_buffer[name_index++] = four_chars[i];
+      done = (four_chars[i] == '\0');
+      if (done)
+        break;
+    }
+    top_of_stack += 4;
+  }
+
+  if (exec_file_buffer[0] == '\0')
+    {
+      inferior_pid = saved_inferior_pid;
+      return NULL;
+    }
+
+  inferior_pid = saved_inferior_pid;
+  return exec_file_buffer;
+}
+
+
+void
+pre_fork_inferior ()
+{
+  int  status;
+
+  status = pipe (startup_semaphore.parent_channel);
+  if (status < 0) {
+      warning ("error getting parent pipe for startup semaphore");
+      return;
+  }
+
+  status = pipe (startup_semaphore.child_channel);
+  if (status < 0) {
+      warning ("error getting child pipe for startup semaphore");
+      return;
+  }
+}
+
+/* Called via #define REQUIRE_ATTACH from inftarg.c,
+ * ultimately from "follow_inferior_fork" in infrun.c,
+ * itself called from "resume".
+ *
+ * This seems to be intended to attach after a fork or
+ * vfork, while "attach" is used to attach to a pid
+ * given by the user.  The check for an existing attach
+ * seems odd--it always fails in our test system.
+ */
+int
+hppa_require_attach (pid)
+  int  pid;
+{
+  int             tt_status;
+  CORE_ADDR       pc;
+  CORE_ADDR       pc_addr;
+  unsigned int    regs_offset;
+  process_state_t old_process_state = process_state;
+  
+  /* Are we already attached?  There appears to be no explicit
+   * way to answer this via ttrace, so we try something which
+   * should be innocuous if we are attached.  If that fails,
+   * then we assume we're not attached, and so attempt to make
+   * it so.
+   */
+  errno = 0;
+  tt_status = call_real_ttrace (TT_PROC_STOP,
+                                pid,
+                                (lwpid_t) TT_NIL,
+                                (TTRACE_ARG_TYPE) TT_NIL,
+                                (TTRACE_ARG_TYPE) TT_NIL,
+                                TT_NIL);
+  
+  if (errno)
+    {
+      /* No change to process-state!
+       */
+      errno = 0;
+      pid   = attach (pid);
+    }
+  else
+    {
+     /* If successful, the process is now stopped.  But if
+      * we're VFORKING, the parent is still running, so don't
+      * change the process state.
+      */
+     if( process_state != VFORKING )
+         process_state = STOPPED;
+
+     /* If we were already attached, you'd think that we
+      * would need to start going again--but you'd be wrong,
+      * as the fork-following code is actually in the middle
+      * of the "resume" routine in in "infrun.c" and so
+      * will (almost) immediately do a resume.
+      *
+      * On the other hand, if we are VFORKING, which means
+      * that the child and the parent share a process for a
+      * while, we know that "resume" won't be resuming
+      * until the child EXEC event is seen.  But we still
+      * don't want to continue, as the event is already
+      * there waiting.
+      */
+     update_thread_state_after_attach( pid, DONT_ATTACH_CONTINUE );
+    }   /* STOP succeeded */
+    
+  return pid;
+}
+
+int
+hppa_require_detach (pid, signal)
+  int  pid;
+  int  signal;
+{
+  int  tt_status;
+
+  /* If signal is non-zero, we must pass the signal on to the active
+     thread prior to detaching.  We do this by continuing the threads
+     with the signal.
+   */
+  if (signal != 0)
+    {
+      errno = 0;
+      threads_continue_all_with_signals( pid, signal );
+    }
+
+  errno = 0;
+  tt_status = call_ttrace (TT_PROC_DETACH,
+                           pid,
+                           TT_NIL,
+                           TT_NIL,
+                           TT_NIL);
+
+  errno = 0; /* Ignore any errors. */
+
+  /* process_state? */
+  
+  return pid;
+}
+
+/* Given the starting address of a memory page, hash it to a bucket in
+   the memory page dictionary.
+   */
+static int
+get_dictionary_bucket_of_page (page_start)
+  CORE_ADDR  page_start;
+{
+  int  hash;
+
+  hash = (page_start / memory_page_dictionary.page_size);
+  hash = hash % MEMORY_PAGE_DICTIONARY_BUCKET_COUNT;
+
+  return hash;
+}
+
+
+/* Given a memory page's starting address, get (i.e., find an existing
+   or create a new) dictionary entry for the page.  The page will be
+   write-protected when this function returns, but may have a reference
+   count of 0 (if the page was newly-added to the dictionary).
+   */
+static memory_page_t *
+get_dictionary_entry_of_page (pid, page_start)
+  int  pid;
+  CORE_ADDR  page_start;
+{
+  int  bucket;
+  memory_page_t *  page = NULL;
+  memory_page_t *  previous_page = NULL;
+
+  /* We're going to be using the dictionary now, than-kew. */
+  require_memory_page_dictionary (pid);
+
+  /* Try to find an existing dictionary entry for this page.  Hash
+     on the page's starting address.
+     */
+  bucket = get_dictionary_bucket_of_page (page_start);
+  page = &memory_page_dictionary.buckets[bucket];
+  while (page != NULL)
+    {
+      if (page->page_start == page_start)
+        break;
+      previous_page = page;
+      page = page->next;
+    }
+
+  /* Did we find a dictionary entry for this page?  If not, then
+     add it to the dictionary now.
+     */
+  if (page == NULL)
+    {
+      /* Create a new entry. */
+      page = (memory_page_t *) xmalloc (sizeof (memory_page_t));
+      page->page_start = page_start;
+      page->reference_count = 0;
+      page->next = NULL;
+      page->previous = NULL;
+
+      /* We'll write-protect the page now, if that's allowed. */
+      page->original_permissions = write_protect_page (pid, page_start);
+
+      /* Add the new entry to the dictionary. */
+      page->previous = previous_page;
+      previous_page->next = page;
+
+      memory_page_dictionary.page_count++;
+    }
+
+  return page;
+}
+
+
+static void
+remove_dictionary_entry_of_page (pid, page)
+  int  pid;
+  memory_page_t *  page;
+{
+  /* Restore the page's original permissions. */
+  unwrite_protect_page (pid, page->page_start, page->original_permissions);
+
+  /* Kick the page out of the dictionary. */
+  if (page->previous != NULL)
+    page->previous->next = page->next;
+  if (page->next != NULL)
+    page->next->previous = page->previous;
+
+  /* Just in case someone retains a handle to this after it's freed. */
+  page->page_start = (CORE_ADDR) 0;
+
+  memory_page_dictionary.page_count--;
+
+  free (page);
+}
+
+
+static void
+hppa_enable_syscall_events (pid)
+  int  pid;
+{
+  int  tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled. */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           pid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Add syscall events to that set. */
+  ttrace_events.tte_events |= TTEVT_SYSCALL_ENTRY;
+  ttrace_events.tte_events |= TTEVT_SYSCALL_RETURN;
+
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           pid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+static void
+hppa_disable_syscall_events (pid)
+  int  pid;
+{
+  int  tt_status;
+  ttevent_t  ttrace_events;
+
+  /* Get the set of events that are currently enabled. */
+  tt_status = call_ttrace (TT_PROC_GET_EVENT_MASK,
+                           pid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+
+  /* Remove syscall events from that set. */
+  ttrace_events.tte_events &= ~TTEVT_SYSCALL_ENTRY;
+  ttrace_events.tte_events &= ~TTEVT_SYSCALL_RETURN;
+
+  tt_status = call_ttrace (TT_PROC_SET_EVENT_MASK,
+                           pid,
+                           (TTRACE_ARG_TYPE) &ttrace_events,
+                           (TTRACE_ARG_TYPE) sizeof (ttrace_events),
+                           TT_NIL);
+  if (errno)
+    perror_with_name ("ttrace");
+}
+
+
+/* The address range beginning with START and ending with START+LEN-1
+   (inclusive) is to be watched via page-protection by a new watchpoint.
+   Set protection for all pages that overlap that range.
+
+   Note that our caller sets TYPE to:
+     0 for a bp_hardware_watchpoint,
+     1 for a bp_read_watchpoint,
+     2 for a bp_access_watchpoint
+
+   (Yes, this is intentionally (though lord only knows why) different
+   from the TYPE that is passed to hppa_remove_hw_watchpoint.)
+   */
+int
+hppa_insert_hw_watchpoint (pid, start, len, type)
+  int  pid;
+  CORE_ADDR  start;
+  LONGEST  len;
+  int  type;
+{
+  CORE_ADDR  page_start;
+  int  dictionary_was_empty;
+  int  page_size;
+  int  page_id;
+  LONGEST  range_size_in_pages;
+
+  if (type != 0)
+    error ("read or access hardware watchpoints not supported on HP-UX");
+
+  /* Examine all pages in the address range. */
+  require_memory_page_dictionary ();
+
+  dictionary_was_empty = (memory_page_dictionary.page_count == (LONGEST) 0);
+
+  page_size = memory_page_dictionary.page_size;
+  page_start = (start / page_size) * page_size;
+  range_size_in_pages = ((LONGEST) len + (LONGEST) page_size - 1) / (LONGEST) page_size;
+
+  for (page_id=0; page_id < range_size_in_pages; page_id++, page_start+=page_size)
+    {
+      memory_page_t *  page;
+
+      /* This gets the page entered into the dictionary if it was
+         not already entered.
+         */
+      page = get_dictionary_entry_of_page (pid, page_start);
+      page->reference_count++;
+    }
+
+  /* Our implementation depends on seeing calls to kernel code, for the
+     following reason.  Here we ask to be notified of syscalls.
+
+     When a protected page is accessed by user code, HP-UX raises a SIGBUS.
+     Fine.
+
+     But when kernel code accesses the page, it doesn't give a SIGBUS.
+     Rather, the system call that touched the page fails, with errno=EFAULT.
+     Not good for us.
+
+     We could accomodate this "feature" by asking to be notified of syscall
+     entries & exits; upon getting an entry event, disabling page-protections;
+     upon getting an exit event, reenabling page-protections and then checking
+     if any watchpoints triggered.
+
+     However, this turns out to be a real performance loser.  syscalls are
+     usually a frequent occurrence.  Having to unprotect-reprotect all watched
+     pages, and also to then read all watched memory locations and compare for
+     triggers, can be quite expensive.
+
+     Instead, we'll only ask to be notified of syscall exits.  When we get
+     one, we'll check whether errno is set.  If not, or if it's not EFAULT,
+     we can just continue the inferior.
+
+     If errno is set upon syscall exit to EFAULT, we must perform some fairly
+     hackish stuff to determine whether the failure really was due to a
+     page-protect trap on a watched location.
+     */
+  if (dictionary_was_empty)
+    hppa_enable_syscall_events (pid);
+
+  return 1;
+}
+
+
+/* The address range beginning with START and ending with START+LEN-1
+   (inclusive) was being watched via page-protection by a watchpoint
+   which has been removed.  Remove protection for all pages that
+   overlap that range, which are not also being watched by other
+   watchpoints.
+   */
+int
+hppa_remove_hw_watchpoint (pid, start, len, type)
+  int  pid;
+  CORE_ADDR  start;
+  LONGEST  len;
+  enum bptype  type;
+{
+  CORE_ADDR  page_start;
+  int  dictionary_is_empty;
+  int  page_size;
+  int  page_id;
+  LONGEST  range_size_in_pages;
+
+  if (type != 0)
+    error ("read or access hardware watchpoints not supported on HP-UX");
+
+  /* Examine all pages in the address range. */
+  require_memory_page_dictionary ();
+
+  page_size = memory_page_dictionary.page_size;
+  page_start = (start / page_size) * page_size;
+  range_size_in_pages = ((LONGEST) len + (LONGEST) page_size - 1) / (LONGEST) page_size;
+
+  for (page_id=0; page_id < range_size_in_pages; page_id++, page_start+=page_size)
+    {
+      memory_page_t *  page;
+
+      page = get_dictionary_entry_of_page (pid, page_start);
+      page->reference_count--;
+
+      /* Was this the last reference of this page?  If so, then we
+         must scrub the entry from the dictionary, and also restore
+         the page's original permissions.
+         */
+      if (page->reference_count == 0)
+        remove_dictionary_entry_of_page (pid, page);
+    }
+
+  dictionary_is_empty = (memory_page_dictionary.page_count == (LONGEST) 0);
+
+  /* If write protections are currently disallowed, then that implies that
+     wait_for_inferior believes that the inferior is within a system call.
+     Since we want to see both syscall entry and return, it's clearly not
+     good to disable syscall events in this state!
+
+     ??rehrauer: Yeah, it'd be better if we had a specific flag that said,
+     "inferior is between syscall events now".  Oh well.
+     */
+  if (dictionary_is_empty && memory_page_dictionary.page_protections_allowed)
+    hppa_disable_syscall_events (pid);
+
+  return 1;
+}
+
+
+/* Could we implement a watchpoint of this type via our available
+   hardware support?
+
+   This query does not consider whether a particular address range
+   could be so watched, but just whether support is generally available
+   for such things.  See hppa_range_profitable_for_hw_watchpoint for a
+   query that answers whether a particular range should be watched via
+   hardware support.
+   */
+int
+hppa_can_use_hw_watchpoint (type, cnt, ot)
+  enum bptype  type;
+  int  cnt;
+  enum bptype  ot;
+{
+  return (type == bp_hardware_watchpoint);
+}
+
+
+/* Assuming we could set a hardware watchpoint on this address, do
+   we think it would be profitable ("a good idea") to do so?  If not,
+   we can always set a regular (aka single-step & test) watchpoint
+   on the address...
+   */
+int
+hppa_range_profitable_for_hw_watchpoint (pid, start, len)
+  int  pid;
+  CORE_ADDR  start;
+  LONGEST  len;
+{
+  int  range_is_stack_based;
+  int  range_is_accessible;
+  CORE_ADDR  page_start;
+  int  page_size;
+  int  page;
+  LONGEST  range_size_in_pages;
+
+  /* ??rehrauer: For now, say that all addresses are potentially
+     profitable.  Possibly later we'll want to test the address
+     for "stackness"?
+     */
+  range_is_stack_based = 0;
+
+  /* If any page in the range is inaccessible, then we cannot
+     really use hardware watchpointing, even though our client
+     thinks we can.  In that case, it's actually an error to
+     attempt to use hw watchpoints, so we'll tell our client
+     that the range is "unprofitable", and hope that they listen...
+     */
+  range_is_accessible = 1;  /* Until proven otherwise. */
+
+  /* Examine all pages in the address range. */
+  errno = 0;
+  page_size = sysconf (_SC_PAGE_SIZE);
+
+  /* If we can't determine page size, we're hosed.  Tell our
+     client it's unprofitable to use hw watchpoints for this
+     range.
+     */
+  if (errno || (page_size <= 0))
+    {
+      errno = 0;
+      return 0;
+    }
+
+  page_start = (start / page_size) * page_size;
+  range_size_in_pages = len / (LONGEST)page_size;
+
+  for (page=0; page < range_size_in_pages; page++, page_start+=page_size)
+    {
+      int  tt_status;
+      int  page_permissions;
+
+      /* Is this page accessible? */
+      errno = 0;
+      tt_status = call_ttrace (TT_PROC_GET_MPROTECT,
+                               pid,
+                               (TTRACE_ARG_TYPE) page_start,
+                               TT_NIL,
+                               (TTRACE_ARG_TYPE) &page_permissions);
+      if (errno || (tt_status < 0))
+        {
+          errno = 0;
+          range_is_accessible = 0;
+          break;
+        }
+
+      /* Yes, go for another... */
+    }
+
+  return (! range_is_stack_based && range_is_accessible);
+}
+
+
+char *
+hppa_pid_or_tid_to_str (id)
+  pid_t  id;
+{
+  static char  buf[100]; /* Static because address returned. */
+
+  /* Does this appear to be a process?  If so, print it that way. */
+  if (is_process_id (id))
+    return hppa_pid_to_str (id);
+
+  /* Else, print both the GDB thread number and the system thread id. */
+  sprintf (buf, "thread %d (", pid_to_thread_id (id));
+  strcat (buf, hppa_tid_to_str (id));
+  strcat (buf, ")\0");
+
+  return buf;
+}
+
+
+/* If the current pid is not the pid this module reported
+ * from "ptrace_wait" with the most recent event, then the
+ * user has switched threads.
+ *
+ * If the last reported event was a breakpoint, then return
+ * the old thread id, else return 0.
+ */
+pid_t 
+hppa_switched_threads( gdb_pid )
+  pid_t gdb_pid;
+{
+  if( gdb_pid == old_gdb_pid ) {
+      /*
+       * Core gdb is working with the same pid that it
+       * was before we reported the last event.  This
+       * is ok: e.g. we reported hitting a thread-specific
+       * breakpoint, but we were reporting the wrong
+       * thread, so the core just ignored the event.
+       *
+       * No thread switch has happened.
+       */
+      return (pid_t) 0;
+  }
+  else if( gdb_pid == reported_pid ) {
+      /*
+       * Core gdb is working with the pid we reported, so
+       * any continue or step will be able to figure out
+       * that it needs to step over any hit breakpoints
+       * without our (i.e. PREPARE_TO_PROCEED's) help.
+       */
+      return (pid_t) 0;
+  }
+  else if( !reported_bpt ) {
+       /*
+        * The core switched, but we didn't just report a
+        * breakpoint, so there's no just-hit breakpoint
+        * instruction at "reported_pid"'s PC, and thus there
+        * is no need to step over it.
+        */
+      return (pid_t) 0;
+  }
+  else {
+       /* There's been a real switch, and we reported
+        * a hit breakpoint.  Let "hppa_prepare_to_proceed"
+        * know, so it can see whether the breakpoint is
+        * still active.
+        */
+       return reported_pid;
+  }
+
+  /* Keep compiler happy with an obvious return at the end.
+   */
+  return (pid_t) 0;  
+}
+
+void
+hppa_ensure_vforking_parent_remains_stopped (pid)
+  int  pid;
+{
+  /* Nothing to do when using ttrace.  Only the ptrace-based implementation
+     must do real work.
+   */
+}
+
+
+int
+hppa_resume_execd_vforking_child_to_get_parent_vfork ()
+{
+  return 0;  /* No, the parent vfork is available now. */
+}
+
+
+
+void
+_initialize_infttrace ()
+{
+  /* Initialize the ttrace-based hardware watchpoint implementation. */
+  memory_page_dictionary.page_count = (LONGEST) -1;
+  memory_page_dictionary.page_protections_allowed = 1;
+
+  errno = 0;
+  memory_page_dictionary.page_size = sysconf (_SC_PAGE_SIZE);
+
+  if (errno || (memory_page_dictionary.page_size <= 0))
+    perror_with_name ("sysconf");
+}
+
diff --git a/gdb/irix4-nat.c b/gdb/irix4-nat.c
new file mode 100644
index 0000000..5a6e111
--- /dev/null
+++ b/gdb/irix4-nat.c
@@ -0,0 +1,195 @@
+/* Native support for the SGI Iris running IRIX version 4, for GDB.
+   Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1995
+   Free Software Foundation, Inc.
+   Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
+   and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
+   Implemented for Irix 4.x by Garrett A. Wollman.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+
+#include <sys/time.h>
+#include <sys/procfs.h>
+#include <setjmp.h>		/* For JB_XXX.  */
+
+/* Size of elements in jmpbuf */
+
+#define JB_ELEMENT_SIZE 4
+
+typedef unsigned int greg_t;	/* why isn't this defined? */
+
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, CORE_ADDR));
+
+/*
+ * See the comment in m68k-tdep.c regarding the utility of these functions.
+ */
+
+void 
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *)(gregsetp->gp_regs);
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  /* FIXME: somewhere, there should be a #define for the meaning
+     of this magic number 32; we should use that. */
+  for(regi = 0; regi < 32; regi++)
+    supply_register (regi, (char *)(regp + regi));
+
+  supply_register (PC_REGNUM, (char *)&(gregsetp->gp_pc));
+  supply_register (HI_REGNUM, (char *)&(gregsetp->gp_mdhi));
+  supply_register (LO_REGNUM, (char *)&(gregsetp->gp_mdlo));
+  supply_register (CAUSE_REGNUM, (char *)&(gregsetp->gp_cause));
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (BADVADDR_REGNUM, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register greg_t *regp = (greg_t *)(gregsetp->gp_regs);
+
+  /* same FIXME as above wrt 32*/
+  for (regi = 0; regi < 32; regi++)
+    if ((regno == -1) || (regno == regi))
+      *(regp + regi) = *(greg_t *) &registers[REGISTER_BYTE (regi)];
+
+  if ((regno == -1) || (regno == PC_REGNUM))
+    gregsetp->gp_pc = *(greg_t *) &registers[REGISTER_BYTE (PC_REGNUM)];
+
+  if ((regno == -1) || (regno == CAUSE_REGNUM))
+    gregsetp->gp_cause = *(greg_t *) &registers[REGISTER_BYTE (CAUSE_REGNUM)];
+
+  if ((regno == -1) || (regno == HI_REGNUM))
+    gregsetp->gp_mdhi = *(greg_t *) &registers[REGISTER_BYTE (HI_REGNUM)];
+
+  if ((regno == -1) || (regno == LO_REGNUM))
+    gregsetp->gp_mdlo = *(greg_t *) &registers[REGISTER_BYTE (LO_REGNUM)];
+}
+
+/*
+ * Now we do the same thing for floating-point registers.
+ * We don't bother to condition on FP0_REGNUM since any
+ * reasonable MIPS configuration has an R3010 in it.
+ *
+ * Again, see the comments in m68k-tdep.c.
+ */
+
+void
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for (regi = 0; regi < 32; regi++)
+    supply_register (FP0_REGNUM + regi,
+		     (char *)&fpregsetp->fp_r.fp_regs[regi]);
+
+  supply_register (FCRCS_REGNUM, (char *)&fpregsetp->fp_csr);
+
+  /* FIXME: how can we supply FCRIR_REGNUM?  SGI doesn't tell us. */
+  supply_register (FCRIR_REGNUM, zerobuf);
+}
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  char *from, *to;
+
+  for (regi = FP0_REGNUM; regi < FP0_REGNUM + 32; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &(fpregsetp->fp_r.fp_regs[regi - FP0_REGNUM]);
+	  memcpy(to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+
+  if ((regno == -1) || (regno == FCRCS_REGNUM))
+    fpregsetp->fp_csr = *(unsigned *) &registers[REGISTER_BYTE(FCRCS_REGNUM)];
+}
+
+
+/* Figure out where the longjmp will land.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR jb_addr;
+
+  jb_addr = read_register (A0_REGNUM);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;			/* Unused */
+     CORE_ADDR reg_addr;	/* Unused */
+{
+  if (core_reg_size != REGISTER_BYTES)
+    {
+      warning ("wrong size gregset struct in core file");
+      return;
+    }
+
+  memcpy ((char *)registers, core_reg_sect, core_reg_size);
+}
+
+
+/* Register that we are able to handle irix4 core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns irix4_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_irix4 ()
+{
+  add_core_fns (&irix4_core_fns);
+}
diff --git a/gdb/irix5-nat.c b/gdb/irix5-nat.c
new file mode 100644
index 0000000..b3373a9
--- /dev/null
+++ b/gdb/irix5-nat.c
@@ -0,0 +1,1349 @@
+/* Native support for the SGI Iris running IRIX version 5, for GDB.
+   Copyright 1988, 89, 90, 91, 92, 93, 94, 95, 96, 98, 1999
+   Free Software Foundation, Inc.
+   Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
+   and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
+   Implemented for Irix 4.x by Garrett A. Wollman.
+   Modified for Irix 5.x by Ian Lance Taylor.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+
+#include "gdb_string.h"
+#include <sys/time.h>
+#include <sys/procfs.h>
+#include <setjmp.h>		/* For JB_XXX.  */
+
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, CORE_ADDR));
+
+/* Size of elements in jmpbuf */
+
+#define JB_ELEMENT_SIZE 4
+
+/*
+ * See the comment in m68k-tdep.c regarding the utility of these functions.
+ *
+ * These definitions are from the MIPS SVR4 ABI, so they may work for
+ * any MIPS SVR4 target.
+ */
+
+void 
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = &(*gregsetp)[0];
+  int gregoff = sizeof (greg_t) - MIPS_REGSIZE;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for(regi = 0; regi <= CTX_RA; regi++)
+    supply_register (regi, (char *)(regp + regi) + gregoff);
+
+  supply_register (PC_REGNUM, (char *)(regp + CTX_EPC) + gregoff);
+  supply_register (HI_REGNUM, (char *)(regp + CTX_MDHI) + gregoff);
+  supply_register (LO_REGNUM, (char *)(regp + CTX_MDLO) + gregoff);
+  supply_register (CAUSE_REGNUM, (char *)(regp + CTX_CAUSE) + gregoff);
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (BADVADDR_REGNUM, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register greg_t *regp = &(*gregsetp)[0];
+
+  /* Under Irix6, if GDB is built with N32 ABI and is debugging an O32
+     executable, we have to sign extend the registers to 64 bits before
+     filling in the gregset structure.  */
+
+  for (regi = 0; regi <= CTX_RA; regi++)
+    if ((regno == -1) || (regno == regi))
+      *(regp + regi) =
+	extract_signed_integer (&registers[REGISTER_BYTE (regi)],
+				REGISTER_RAW_SIZE (regi));
+
+  if ((regno == -1) || (regno == PC_REGNUM))
+    *(regp + CTX_EPC) =
+      extract_signed_integer (&registers[REGISTER_BYTE (PC_REGNUM)],
+			      REGISTER_RAW_SIZE (PC_REGNUM));
+
+  if ((regno == -1) || (regno == CAUSE_REGNUM))
+    *(regp + CTX_CAUSE) =
+      extract_signed_integer (&registers[REGISTER_BYTE (CAUSE_REGNUM)],
+			      REGISTER_RAW_SIZE (CAUSE_REGNUM));
+
+  if ((regno == -1) || (regno == HI_REGNUM))
+    *(regp + CTX_MDHI) =
+      extract_signed_integer (&registers[REGISTER_BYTE (HI_REGNUM)],
+			      REGISTER_RAW_SIZE (HI_REGNUM));
+
+  if ((regno == -1) || (regno == LO_REGNUM))
+    *(regp + CTX_MDLO) =
+      extract_signed_integer (&registers[REGISTER_BYTE (LO_REGNUM)],
+			      REGISTER_RAW_SIZE (LO_REGNUM));
+}
+
+/*
+ * Now we do the same thing for floating-point registers.
+ * We don't bother to condition on FP0_REGNUM since any
+ * reasonable MIPS configuration has an R3010 in it.
+ *
+ * Again, see the comments in m68k-tdep.c.
+ */
+
+void
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  /* FIXME, this is wrong for the N32 ABI which has 64 bit FP regs. */
+
+  for (regi = 0; regi < 32; regi++)
+    supply_register (FP0_REGNUM + regi,
+		     (char *)&fpregsetp->fp_r.fp_regs[regi]);
+
+  supply_register (FCRCS_REGNUM, (char *)&fpregsetp->fp_csr);
+
+  /* FIXME: how can we supply FCRIR_REGNUM?  SGI doesn't tell us. */
+  supply_register (FCRIR_REGNUM, zerobuf);
+}
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  char *from, *to;
+
+  /* FIXME, this is wrong for the N32 ABI which has 64 bit FP regs. */
+
+  for (regi = FP0_REGNUM; regi < FP0_REGNUM + 32; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &(fpregsetp->fp_r.fp_regs[regi - FP0_REGNUM]);
+	  memcpy(to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+
+  if ((regno == -1) || (regno == FCRCS_REGNUM))
+    fpregsetp->fp_csr = *(unsigned *) &registers[REGISTER_BYTE(FCRCS_REGNUM)];
+}
+
+
+/* Figure out where the longjmp will land.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR jb_addr;
+
+  jb_addr = read_register (A0_REGNUM);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;			/* Unused */
+     CORE_ADDR reg_addr;	/* Unused */
+{
+  if (core_reg_size == REGISTER_BYTES)
+    {
+      memcpy ((char *)registers, core_reg_sect, core_reg_size);
+    }
+  else if (MIPS_REGSIZE == 4 &&
+	   core_reg_size == (2 * MIPS_REGSIZE) * NUM_REGS)
+    {
+      /* This is a core file from a N32 executable, 64 bits are saved
+	 for all registers.  */
+      char *srcp = core_reg_sect;
+      char *dstp = registers;
+      int regno;
+
+      for (regno = 0; regno < NUM_REGS; regno++)
+	{
+	  if (regno >= FP0_REGNUM && regno < (FP0_REGNUM + 32))
+	    {
+	      /* FIXME, this is wrong, N32 has 64 bit FP regs, but GDB
+		 currently assumes that they are 32 bit.  */
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	      if (REGISTER_RAW_SIZE(regno) == 4)
+		{
+		  /* copying 4 bytes from eight bytes?
+		     I don't see how this can be right...  */
+		  srcp += 4;	
+		}
+	      else
+		{
+		  /* copy all 8 bytes (sizeof(double)) */
+		  *dstp++ = *srcp++;
+		  *dstp++ = *srcp++;
+		  *dstp++ = *srcp++;
+		  *dstp++ = *srcp++;
+		}
+	    }
+	  else
+	    {
+	      srcp += 4;
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	      *dstp++ = *srcp++;
+	    }
+	}
+    }
+  else
+    {
+      warning ("wrong size gregset struct in core file");
+      return;
+    }
+
+  registers_fetched ();
+}
+
+/* Irix 5 uses what appears to be a unique form of shared library
+   support.  This is a copy of solib.c modified for Irix 5.  */
+/* FIXME: Most of this code could be merged with osfsolib.c and solib.c
+   by using next_link_map_member and xfer_link_map_member in solib.c.  */
+
+#include <sys/types.h>
+#include <signal.h>
+#include <sys/param.h>
+#include <fcntl.h>
+
+/* <obj.h> includes <sym.h> and <symconst.h>, which causes conflicts
+   with our versions of those files included by tm-mips.h.  Prevent
+   <obj.h> from including them with some appropriate defines.  */
+#define __SYM_H__
+#define __SYMCONST_H__
+#include <obj.h>
+#ifdef HAVE_OBJLIST_H
+#include <objlist.h>
+#endif
+
+#ifdef NEW_OBJ_INFO_MAGIC
+#define HANDLE_NEW_OBJ_LIST
+#endif
+
+#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "command.h"
+#include "frame.h"
+#include "gnu-regex.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcmd.h"
+
+/* The symbol which starts off the list of shared libraries.  */
+#define DEBUG_BASE "__rld_obj_head"
+
+/* Irix 6.x introduces a new variant of object lists.
+   To be able to debug O32 executables under Irix 6, we have to handle both
+   variants.  */
+
+typedef enum
+{
+  OBJ_LIST_OLD,		/* Pre Irix 6.x object list.  */
+  OBJ_LIST_32,		/* 32 Bit Elf32_Obj_Info.  */
+  OBJ_LIST_64		/* 64 Bit Elf64_Obj_Info, FIXME not yet implemented.  */
+} obj_list_variant;
+
+/* Define our own link_map structure.
+   This will help to share code with osfsolib.c and solib.c.  */
+
+struct link_map {
+  obj_list_variant l_variant;	/* which variant of object list */
+  CORE_ADDR l_lladdr;		/* addr in inferior list was read from */
+  CORE_ADDR l_next;		/* address of next object list entry */
+};
+
+/* Irix 5 shared objects are pre-linked to particular addresses
+   although the dynamic linker may have to relocate them if the
+   address ranges of the libraries used by the main program clash.
+   The offset is the difference between the address where the object
+   is mapped and the binding address of the shared library.  */
+#define LM_OFFSET(so) ((so) -> offset)
+/* Loaded address of shared library.  */
+#define LM_ADDR(so) ((so) -> lmstart)
+
+char shadow_contents[BREAKPOINT_MAX];	/* Stash old bkpt addr contents */
+
+struct so_list {
+  struct so_list *next;			/* next structure in linked list */
+  struct link_map lm;
+  CORE_ADDR offset;			/* prelink to load address offset */
+  char *so_name;			/* shared object lib name */
+  CORE_ADDR lmstart;			/* lower addr bound of mapped object */
+  CORE_ADDR lmend;			/* upper addr bound of mapped object */
+  char symbols_loaded;			/* flag: symbols read in yet? */
+  char from_tty;			/* flag: print msgs? */
+  struct objfile *objfile;		/* objfile for loaded lib */
+  struct section_table *sections;
+  struct section_table *sections_end;
+  struct section_table *textsection;
+  bfd *abfd;
+};
+
+static struct so_list *so_list_head;	/* List of known shared objects */
+static CORE_ADDR debug_base;		/* Base of dynamic linker structures */
+static CORE_ADDR breakpoint_addr;	/* Address where end bkpt is set */
+
+/* Local function prototypes */
+
+static void
+sharedlibrary_command PARAMS ((char *, int));
+
+static int
+enable_break PARAMS ((void));
+
+static int
+disable_break PARAMS ((void));
+
+static void
+info_sharedlibrary_command PARAMS ((char *, int));
+
+static int
+symbol_add_stub PARAMS ((char *));
+
+static struct so_list *
+find_solib PARAMS ((struct so_list *));
+
+static struct link_map *
+first_link_map_member PARAMS ((void));
+
+static struct link_map *
+next_link_map_member PARAMS ((struct so_list *));
+
+static void
+xfer_link_map_member PARAMS ((struct so_list *, struct link_map *));
+
+static CORE_ADDR
+locate_base PARAMS ((void));
+
+static int
+solib_map_sections PARAMS ((char *));
+
+/*
+
+LOCAL FUNCTION
+
+	solib_map_sections -- open bfd and build sections for shared lib
+
+SYNOPSIS
+
+	static int solib_map_sections (struct so_list *so)
+
+DESCRIPTION
+
+	Given a pointer to one of the shared objects in our list
+	of mapped objects, use the recorded name to open a bfd
+	descriptor for the object, build a section table, and then
+	relocate all the section addresses by the base address at
+	which the shared object was mapped.
+
+FIXMES
+
+	In most (all?) cases the shared object file name recorded in the
+	dynamic linkage tables will be a fully qualified pathname.  For
+	cases where it isn't, do we really mimic the systems search
+	mechanism correctly in the below code (particularly the tilde
+	expansion stuff?).
+ */
+
+static int
+solib_map_sections (arg)
+     char *arg;
+{
+  struct so_list *so = (struct so_list *) arg;	/* catch_errors bogon */
+  char *filename;
+  char *scratch_pathname;
+  int scratch_chan;
+  struct section_table *p;
+  struct cleanup *old_chain;
+  bfd *abfd;
+  
+  filename = tilde_expand (so -> so_name);
+  old_chain = make_cleanup (free, filename);
+  
+  scratch_chan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
+			&scratch_pathname);
+  if (scratch_chan < 0)
+    {
+      scratch_chan = openp (getenv ("LD_LIBRARY_PATH"), 1, filename,
+			    O_RDONLY, 0, &scratch_pathname);
+    }
+  if (scratch_chan < 0)
+    {
+      perror_with_name (filename);
+    }
+  /* Leave scratch_pathname allocated.  abfd->name will point to it.  */
+
+  abfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan);
+  if (!abfd)
+    {
+      close (scratch_chan);
+      error ("Could not open `%s' as an executable file: %s",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  /* Leave bfd open, core_xfer_memory and "info files" need it.  */
+  so -> abfd = abfd;
+  abfd -> cacheable = true;
+
+  if (!bfd_check_format (abfd, bfd_object))
+    {
+      error ("\"%s\": not in executable format: %s.",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  if (build_section_table (abfd, &so -> sections, &so -> sections_end))
+    {
+      error ("Can't find the file sections in `%s': %s", 
+	     bfd_get_filename (exec_bfd), bfd_errmsg (bfd_get_error ()));
+    }
+
+  for (p = so -> sections; p < so -> sections_end; p++)
+    {
+      /* Relocate the section binding addresses as recorded in the shared
+	 object's file by the offset to get the address to which the
+	 object was actually mapped.  */
+      p -> addr += LM_OFFSET (so);
+      p -> endaddr += LM_OFFSET (so);
+      so -> lmend = (CORE_ADDR) max (p -> endaddr, so -> lmend);
+      if (STREQ (p -> the_bfd_section -> name, ".text"))
+	{
+	  so -> textsection = p;
+	}
+    }
+
+  /* Free the file names, close the file now.  */
+  do_cleanups (old_chain);
+
+  return (1);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	locate_base -- locate the base address of dynamic linker structs
+
+SYNOPSIS
+
+	CORE_ADDR locate_base (void)
+
+DESCRIPTION
+
+	For both the SunOS and SVR4 shared library implementations, if the
+	inferior executable has been linked dynamically, there is a single
+	address somewhere in the inferior's data space which is the key to
+	locating all of the dynamic linker's runtime structures.  This
+	address is the value of the symbol defined by the macro DEBUG_BASE.
+	The job of this function is to find and return that address, or to
+	return 0 if there is no such address (the executable is statically
+	linked for example).
+
+	For SunOS, the job is almost trivial, since the dynamic linker and
+	all of it's structures are statically linked to the executable at
+	link time.  Thus the symbol for the address we are looking for has
+	already been added to the minimal symbol table for the executable's
+	objfile at the time the symbol file's symbols were read, and all we
+	have to do is look it up there.  Note that we explicitly do NOT want
+	to find the copies in the shared library.
+
+	The SVR4 version is much more complicated because the dynamic linker
+	and it's structures are located in the shared C library, which gets
+	run as the executable's "interpreter" by the kernel.  We have to go
+	to a lot more work to discover the address of DEBUG_BASE.  Because
+	of this complexity, we cache the value we find and return that value
+	on subsequent invocations.  Note there is no copy in the executable
+	symbol tables.
+
+	Irix 5 is basically like SunOS.
+
+	Note that we can assume nothing about the process state at the time
+	we need to find this address.  We may be stopped on the first instruc-
+	tion of the interpreter (C shared library), the first instruction of
+	the executable itself, or somewhere else entirely (if we attached
+	to the process for example).
+
+ */
+
+static CORE_ADDR
+locate_base ()
+{
+  struct minimal_symbol *msymbol;
+  CORE_ADDR address = 0;
+
+  msymbol = lookup_minimal_symbol (DEBUG_BASE, NULL, symfile_objfile);
+  if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
+    {
+      address = SYMBOL_VALUE_ADDRESS (msymbol);
+    }
+  return (address);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	first_link_map_member -- locate first member in dynamic linker's map
+
+SYNOPSIS
+
+	static struct link_map *first_link_map_member (void)
+
+DESCRIPTION
+
+	Read in a copy of the first member in the inferior's dynamic
+	link map from the inferior's dynamic linker structures, and return
+	a pointer to the link map descriptor.
+*/
+
+static struct link_map *
+first_link_map_member ()
+{
+  struct obj_list *listp;
+  struct obj_list list_old;
+  struct link_map *lm;
+  static struct link_map first_lm;
+  CORE_ADDR lladdr;
+  CORE_ADDR next_lladdr;
+
+  /* We have not already read in the dynamic linking structures
+     from the inferior, lookup the address of the base structure. */
+  debug_base = locate_base ();
+  if (debug_base == 0)
+    return NULL;
+
+  /* Get address of first list entry.  */
+  read_memory (debug_base, (char *) &listp, sizeof (struct obj_list *));
+
+  if (listp == NULL)
+    return NULL;
+
+  /* Get first list entry.  */
+  lladdr = (CORE_ADDR) listp;
+  read_memory (lladdr, (char *) &list_old, sizeof (struct obj_list));
+
+  /* The first entry in the list is the object file we are debugging,
+     so skip it.  */
+  next_lladdr = (CORE_ADDR) list_old.next; 
+
+#ifdef HANDLE_NEW_OBJ_LIST
+  if (list_old.data == NEW_OBJ_INFO_MAGIC)
+    {
+      Elf32_Obj_Info list_32;
+
+      read_memory (lladdr, (char *) &list_32, sizeof (Elf32_Obj_Info));
+      if (list_32.oi_size != sizeof (Elf32_Obj_Info))
+	return NULL;
+      next_lladdr = (CORE_ADDR) list_32.oi_next; 
+    }
+#endif
+
+  if (next_lladdr == 0)
+    return NULL;
+
+  first_lm.l_lladdr = next_lladdr;
+  lm = &first_lm;
+  return lm;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	next_link_map_member -- locate next member in dynamic linker's map
+
+SYNOPSIS
+
+	static struct link_map *next_link_map_member (so_list_ptr)
+
+DESCRIPTION
+
+	Read in a copy of the next member in the inferior's dynamic
+	link map from the inferior's dynamic linker structures, and return
+	a pointer to the link map descriptor.
+*/
+
+static struct link_map *
+next_link_map_member (so_list_ptr)
+     struct so_list *so_list_ptr;
+{
+  struct link_map *lm = &so_list_ptr -> lm;
+  CORE_ADDR next_lladdr = lm -> l_next;
+  static struct link_map next_lm;
+
+  if (next_lladdr == 0)
+    {
+      /* We have hit the end of the list, so check to see if any were
+	 added, but be quiet if we can't read from the target any more. */
+      int status = 0;
+
+      if (lm -> l_variant == OBJ_LIST_OLD)
+	{
+	  struct obj_list list_old;
+
+	  status = target_read_memory (lm -> l_lladdr,
+				       (char *) &list_old,
+				       sizeof (struct obj_list));
+	  next_lladdr = (CORE_ADDR) list_old.next;
+	}
+#ifdef HANDLE_NEW_OBJ_LIST
+      else if (lm -> l_variant == OBJ_LIST_32)
+	{
+	  Elf32_Obj_Info list_32;
+	  status = target_read_memory (lm -> l_lladdr,
+				       (char *) &list_32,
+				       sizeof (Elf32_Obj_Info));
+	  next_lladdr = (CORE_ADDR) list_32.oi_next;
+	}
+#endif
+
+      if (status != 0 || next_lladdr == 0)
+	return NULL;
+    }
+
+  next_lm.l_lladdr = next_lladdr;
+  lm = &next_lm;
+  return lm;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	xfer_link_map_member -- set local variables from dynamic linker's map
+
+SYNOPSIS
+
+	static void xfer_link_map_member (so_list_ptr, lm)
+
+DESCRIPTION
+
+	Read in a copy of the requested member in the inferior's dynamic
+	link map from the inferior's dynamic linker structures, and fill
+	in the necessary so_list_ptr elements.
+*/
+
+static void
+xfer_link_map_member (so_list_ptr, lm)
+     struct so_list *so_list_ptr;
+     struct link_map *lm;
+{
+  struct obj_list list_old;
+  CORE_ADDR lladdr = lm -> l_lladdr;
+  struct link_map *new_lm = &so_list_ptr -> lm;
+  int errcode;
+
+  read_memory (lladdr, (char *) &list_old, sizeof (struct obj_list));
+
+  new_lm -> l_variant = OBJ_LIST_OLD;
+  new_lm -> l_lladdr = lladdr;
+  new_lm -> l_next = (CORE_ADDR) list_old.next; 
+
+#ifdef HANDLE_NEW_OBJ_LIST
+  if (list_old.data == NEW_OBJ_INFO_MAGIC)
+    {
+      Elf32_Obj_Info list_32;
+
+      read_memory (lladdr, (char *) &list_32, sizeof (Elf32_Obj_Info));
+      if (list_32.oi_size != sizeof (Elf32_Obj_Info))
+	return;
+      new_lm -> l_variant = OBJ_LIST_32;
+      new_lm -> l_next = (CORE_ADDR) list_32.oi_next; 
+
+      target_read_string ((CORE_ADDR) list_32.oi_pathname,
+			  &so_list_ptr -> so_name,
+			  list_32.oi_pathname_len + 1, &errcode);
+      if (errcode != 0)
+	memory_error (errcode, (CORE_ADDR) list_32.oi_pathname);
+
+      LM_ADDR (so_list_ptr) = (CORE_ADDR) list_32.oi_ehdr;
+      LM_OFFSET (so_list_ptr) =
+	(CORE_ADDR) list_32.oi_ehdr - (CORE_ADDR) list_32.oi_orig_ehdr;
+    }
+  else
+#endif
+    {
+#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32
+      /* If we are compiling GDB under N32 ABI, the alignments in
+	 the obj struct are different from the O32 ABI and we will get
+	 wrong values when accessing the struct.
+	 As a workaround we use fixed values which are good for
+	 Irix 6.2.  */
+      char buf[432];
+
+      read_memory ((CORE_ADDR) list_old.data, buf, sizeof (buf));
+
+      target_read_string (extract_address (&buf[236], 4),
+			  &so_list_ptr -> so_name,
+			  INT_MAX, &errcode);
+      if (errcode != 0)
+	memory_error (errcode, extract_address (&buf[236], 4));
+
+      LM_ADDR (so_list_ptr) = extract_address (&buf[196], 4);
+      LM_OFFSET (so_list_ptr) =
+	extract_address (&buf[196], 4) - extract_address (&buf[248], 4);
+#else
+      struct obj obj_old;
+
+      read_memory ((CORE_ADDR) list_old.data, (char *) &obj_old,
+		   sizeof (struct obj));
+
+      target_read_string ((CORE_ADDR) obj_old.o_path,
+			  &so_list_ptr -> so_name,
+			  INT_MAX, &errcode);
+      if (errcode != 0)
+	memory_error (errcode, (CORE_ADDR) obj_old.o_path);
+
+      LM_ADDR (so_list_ptr) = (CORE_ADDR) obj_old.o_praw;
+      LM_OFFSET (so_list_ptr) =
+	(CORE_ADDR) obj_old.o_praw - obj_old.o_base_address;
+#endif
+    }
+
+  catch_errors (solib_map_sections, (char *) so_list_ptr,
+		"Error while mapping shared library sections:\n",
+		RETURN_MASK_ALL);
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	find_solib -- step through list of shared objects
+
+SYNOPSIS
+
+	struct so_list *find_solib (struct so_list *so_list_ptr)
+
+DESCRIPTION
+
+	This module contains the routine which finds the names of any
+	loaded "images" in the current process. The argument in must be
+	NULL on the first call, and then the returned value must be passed
+	in on subsequent calls. This provides the capability to "step" down
+	the list of loaded objects. On the last object, a NULL value is
+	returned.
+ */
+
+static struct so_list *
+find_solib (so_list_ptr)
+     struct so_list *so_list_ptr;	/* Last lm or NULL for first one */
+{
+  struct so_list *so_list_next = NULL;
+  struct link_map *lm = NULL;
+  struct so_list *new;
+  
+  if (so_list_ptr == NULL)
+    {
+      /* We are setting up for a new scan through the loaded images. */
+      if ((so_list_next = so_list_head) == NULL)
+	{
+	  /* Find the first link map list member. */
+	  lm = first_link_map_member ();
+	}
+    }
+  else
+    {
+      /* We have been called before, and are in the process of walking
+	 the shared library list.  Advance to the next shared object. */
+      lm = next_link_map_member (so_list_ptr);
+      so_list_next = so_list_ptr -> next;
+    }
+  if ((so_list_next == NULL) && (lm != NULL))
+    {
+      new = (struct so_list *) xmalloc (sizeof (struct so_list));
+      memset ((char *) new, 0, sizeof (struct so_list));
+      /* Add the new node as the next node in the list, or as the root
+	 node if this is the first one. */
+      if (so_list_ptr != NULL)
+	{
+	  so_list_ptr -> next = new;
+	}
+      else
+	{
+	  so_list_head = new;
+	}      
+      so_list_next = new;
+      xfer_link_map_member (new, lm);
+    }
+  return (so_list_next);
+}
+
+/* A small stub to get us past the arg-passing pinhole of catch_errors.  */
+
+static int
+symbol_add_stub (arg)
+     char *arg;
+{
+  register struct so_list *so = (struct so_list *) arg;	/* catch_errs bogon */
+  CORE_ADDR text_addr = 0;
+
+  if (so -> textsection)
+    text_addr = so -> textsection -> addr;
+  else if (so -> abfd != NULL)
+    {
+      asection *lowest_sect;
+
+      /* If we didn't find a mapped non zero sized .text section, set up
+	 text_addr so that the relocation in symbol_file_add does no harm.  */
+
+      lowest_sect = bfd_get_section_by_name (so -> abfd, ".text");
+      if (lowest_sect == NULL)
+	bfd_map_over_sections (so -> abfd, find_lowest_section,
+			       (PTR) &lowest_sect);
+      if (lowest_sect)
+	text_addr = bfd_section_vma (so -> abfd, lowest_sect) + LM_OFFSET (so);
+    }
+  
+  so -> objfile = symbol_file_add (so -> so_name, so -> from_tty,
+				   text_addr,
+				   0, 0, 0, 0, 0);
+  return (1);
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_add -- add a shared library file to the symtab and section list
+
+SYNOPSIS
+
+	void solib_add (char *arg_string, int from_tty,
+			struct target_ops *target)
+
+DESCRIPTION
+
+*/
+
+void
+solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{	
+  register struct so_list *so = NULL;   	/* link map state variable */
+
+  /* Last shared library that we read.  */
+  struct so_list *so_last = NULL;
+
+  char *re_err;
+  int count;
+  int old;
+  
+  if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
+    {
+      error ("Invalid regexp: %s", re_err);
+    }
+  
+  /* Add the shared library sections to the section table of the
+     specified target, if any.  */
+  if (target)
+    {
+      /* Count how many new section_table entries there are.  */
+      so = NULL;
+      count = 0;
+      while ((so = find_solib (so)) != NULL)
+	{
+	  if (so -> so_name[0])
+	    {
+	      count += so -> sections_end - so -> sections;
+	    }
+	}
+      
+      if (count)
+	{
+	  int update_coreops;
+
+	  /* We must update the to_sections field in the core_ops structure
+	     here, otherwise we dereference a potential dangling pointer
+	     for each call to target_read/write_memory within this routine.  */
+	  update_coreops = core_ops.to_sections == target->to_sections;
+	     
+	  /* Reallocate the target's section table including the new size.  */
+	  if (target -> to_sections)
+	    {
+	      old = target -> to_sections_end - target -> to_sections;
+	      target -> to_sections = (struct section_table *)
+		xrealloc ((char *)target -> to_sections,
+			 (sizeof (struct section_table)) * (count + old));
+	    }
+	  else
+	    {
+	      old = 0;
+	      target -> to_sections = (struct section_table *)
+		xmalloc ((sizeof (struct section_table)) * count);
+	    }
+	  target -> to_sections_end = target -> to_sections + (count + old);
+	  
+	  /* Update the to_sections field in the core_ops structure
+	     if needed.  */
+	  if (update_coreops)
+	    {
+	      core_ops.to_sections = target->to_sections;
+	      core_ops.to_sections_end = target->to_sections_end;
+	    }
+
+	  /* Add these section table entries to the target's table.  */
+	  while ((so = find_solib (so)) != NULL)
+	    {
+	      if (so -> so_name[0])
+		{
+		  count = so -> sections_end - so -> sections;
+		  memcpy ((char *) (target -> to_sections + old),
+			  so -> sections, 
+			  (sizeof (struct section_table)) * count);
+		  old += count;
+		}
+	    }
+	}
+    }
+  
+  /* Now add the symbol files.  */
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0] && re_exec (so -> so_name))
+	{
+	  so -> from_tty = from_tty;
+	  if (so -> symbols_loaded)
+	    {
+	      if (from_tty)
+		{
+		  printf_unfiltered ("Symbols already loaded for %s\n", so -> so_name);
+		}
+	    }
+	  else if (catch_errors
+		   (symbol_add_stub, (char *) so,
+		    "Error while reading shared library symbols:\n",
+		    RETURN_MASK_ALL))
+	    {
+	      so_last = so;
+	      so -> symbols_loaded = 1;
+	    }
+	}
+    }
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  if (so_last)
+    reinit_frame_cache ();
+}
+
+/*
+
+LOCAL FUNCTION
+
+	info_sharedlibrary_command -- code for "info sharedlibrary"
+
+SYNOPSIS
+
+	static void info_sharedlibrary_command ()
+
+DESCRIPTION
+
+	Walk through the shared library list and print information
+	about each attached library.
+*/
+
+static void
+info_sharedlibrary_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct so_list *so = NULL;  	/* link map state variable */
+  int header_done = 0;
+  
+  if (exec_bfd == NULL)
+    {
+      printf_unfiltered ("No exec file.\n");
+      return;
+    }
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0])
+	{
+	  if (!header_done)
+	    {
+	      printf_unfiltered("%-12s%-12s%-12s%s\n", "From", "To", "Syms Read",
+		     "Shared Object Library");
+	      header_done++;
+	    }
+	  printf_unfiltered ("%-12s",
+		  local_hex_string_custom ((unsigned long) LM_ADDR (so),
+					   "08l"));
+	  printf_unfiltered ("%-12s",
+		  local_hex_string_custom ((unsigned long) so -> lmend,
+					   "08l"));
+	  printf_unfiltered ("%-12s", so -> symbols_loaded ? "Yes" : "No");
+	  printf_unfiltered ("%s\n",  so -> so_name);
+	}
+    }
+  if (so_list_head == NULL)
+    {
+      printf_unfiltered ("No shared libraries loaded at this time.\n");	
+    }
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_address -- check to see if an address is in a shared lib
+
+SYNOPSIS
+
+	char *solib_address (CORE_ADDR address)
+
+DESCRIPTION
+
+	Provides a hook for other gdb routines to discover whether or
+	not a particular address is within the mapped address space of
+	a shared library.  Any address between the base mapping address
+	and the first address beyond the end of the last mapping, is
+	considered to be within the shared library address space, for
+	our purposes.
+
+	For example, this routine is called at one point to disable
+	breakpoints which are in shared libraries that are not currently
+	mapped in.
+ */
+
+char *
+solib_address (address)
+     CORE_ADDR address;
+{
+  register struct so_list *so = 0;   	/* link map state variable */
+  
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0])
+	{
+	  if ((address >= (CORE_ADDR) LM_ADDR (so)) &&
+	      (address < (CORE_ADDR) so -> lmend))
+	    return (so->so_name);
+	}
+    }
+  return (0);
+}
+
+/* Called by free_all_symtabs */
+
+void 
+clear_solib()
+{
+  struct so_list *next;
+  char *bfd_filename;
+  
+  disable_breakpoints_in_shlibs (1);
+
+  while (so_list_head)
+    {
+      if (so_list_head -> sections)
+	{
+	  free ((PTR)so_list_head -> sections);
+	}
+      if (so_list_head -> abfd)
+	{
+	  bfd_filename = bfd_get_filename (so_list_head -> abfd);
+	  if (!bfd_close (so_list_head -> abfd))
+	    warning ("cannot close \"%s\": %s",
+		     bfd_filename, bfd_errmsg (bfd_get_error ()));
+	}
+      else
+	/* This happens for the executable on SVR4.  */
+	bfd_filename = NULL;
+
+      next = so_list_head -> next;
+      if (bfd_filename)
+	free ((PTR)bfd_filename);
+      free (so_list_head->so_name);
+      free ((PTR)so_list_head);
+      so_list_head = next;
+    }
+  debug_base = 0;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	disable_break -- remove the "mapping changed" breakpoint
+
+SYNOPSIS
+
+	static int disable_break ()
+
+DESCRIPTION
+
+	Removes the breakpoint that gets hit when the dynamic linker
+	completes a mapping change.
+
+*/
+
+static int
+disable_break ()
+{
+  int status = 1;
+
+
+  /* Note that breakpoint address and original contents are in our address
+     space, so we just need to write the original contents back. */
+
+  if (memory_remove_breakpoint (breakpoint_addr, shadow_contents) != 0)
+    {
+      status = 0;
+    }
+
+  /* For the SVR4 version, we always know the breakpoint address.  For the
+     SunOS version we don't know it until the above code is executed.
+     Grumble if we are stopped anywhere besides the breakpoint address. */
+
+  if (stop_pc != breakpoint_addr)
+    {
+      warning ("stopped at unknown breakpoint while handling shared libraries");
+    }
+
+  return (status);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	enable_break -- arrange for dynamic linker to hit breakpoint
+
+SYNOPSIS
+
+	int enable_break (void)
+
+DESCRIPTION
+
+	This functions inserts a breakpoint at the entry point of the
+	main executable, where all shared libraries are mapped in.
+*/
+
+static int
+enable_break ()
+{
+  if (symfile_objfile != NULL
+      && target_insert_breakpoint (symfile_objfile->ei.entry_point,
+				   shadow_contents) == 0)
+    {
+      breakpoint_addr = symfile_objfile->ei.entry_point;
+      return 1;
+    }
+
+  return 0;
+}
+  
+/*
+  
+GLOBAL FUNCTION
+  
+	solib_create_inferior_hook -- shared library startup support
+  
+SYNOPSIS
+  
+	void solib_create_inferior_hook()
+  
+DESCRIPTION
+  
+	When gdb starts up the inferior, it nurses it along (through the
+	shell) until it is ready to execute it's first instruction.  At this
+	point, this function gets called via expansion of the macro
+	SOLIB_CREATE_INFERIOR_HOOK.
+
+	For SunOS executables, this first instruction is typically the
+	one at "_start", or a similar text label, regardless of whether
+	the executable is statically or dynamically linked.  The runtime
+	startup code takes care of dynamically linking in any shared
+	libraries, once gdb allows the inferior to continue.
+
+	For SVR4 executables, this first instruction is either the first
+	instruction in the dynamic linker (for dynamically linked
+	executables) or the instruction at "start" for statically linked
+	executables.  For dynamically linked executables, the system
+	first exec's /lib/libc.so.N, which contains the dynamic linker,
+	and starts it running.  The dynamic linker maps in any needed
+	shared libraries, maps in the actual user executable, and then
+	jumps to "start" in the user executable.
+
+	For both SunOS shared libraries, and SVR4 shared libraries, we
+	can arrange to cooperate with the dynamic linker to discover the
+	names of shared libraries that are dynamically linked, and the
+	base addresses to which they are linked.
+
+	This function is responsible for discovering those names and
+	addresses, and saving sufficient information about them to allow
+	their symbols to be read at a later time.
+
+FIXME
+
+	Between enable_break() and disable_break(), this code does not
+	properly handle hitting breakpoints which the user might have
+	set in the startup code or in the dynamic linker itself.  Proper
+	handling will probably have to wait until the implementation is
+	changed to use the "breakpoint handler function" method.
+
+	Also, what if child has exit()ed?  Must exit loop somehow.
+  */
+
+void 
+solib_create_inferior_hook()
+{
+  if (!enable_break ())
+    {
+      warning ("shared library handler failed to enable breakpoint");
+      return;
+    }
+
+  /* Now run the target.  It will eventually hit the breakpoint, at
+     which point all of the libraries will have been mapped in and we
+     can go groveling around in the dynamic linker structures to find
+     out what we need to know about them. */
+
+  clear_proceed_status ();
+  stop_soon_quietly = 1;
+  stop_signal = TARGET_SIGNAL_0;
+  do
+    {
+      target_resume (-1, 0, stop_signal);
+      wait_for_inferior ();
+    }
+  while (stop_signal != TARGET_SIGNAL_TRAP);
+  
+  /* We are now either at the "mapping complete" breakpoint (or somewhere
+     else, a condition we aren't prepared to deal with anyway), so adjust
+     the PC as necessary after a breakpoint, disable the breakpoint, and
+     add any shared libraries that were mapped in. */
+
+  if (DECR_PC_AFTER_BREAK)
+    {
+      stop_pc -= DECR_PC_AFTER_BREAK;
+      write_register (PC_REGNUM, stop_pc);
+    }
+
+  if (!disable_break ())
+    {
+      warning ("shared library handler failed to disable breakpoint");
+    }
+
+  /*  solib_add will call reinit_frame_cache.
+      But we are stopped in the startup code and we might not have symbols
+      for the startup code, so heuristic_proc_start could be called
+      and will put out an annoying warning.
+      Delaying the resetting of stop_soon_quietly until after symbol loading
+      suppresses the warning.  */
+  if (auto_solib_add)
+    solib_add ((char *) 0, 0, (struct target_ops *) 0);
+  stop_soon_quietly = 0;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	sharedlibrary_command -- handle command to explicitly add library
+
+SYNOPSIS
+
+	static void sharedlibrary_command (char *args, int from_tty)
+
+DESCRIPTION
+
+*/
+
+static void
+sharedlibrary_command (args, from_tty)
+char *args;
+int from_tty;
+{
+  dont_repeat ();
+  solib_add (args, from_tty, (struct target_ops *) 0);
+}
+
+void
+_initialize_solib()
+{
+  add_com ("sharedlibrary", class_files, sharedlibrary_command,
+	   "Load shared object library symbols for files matching REGEXP.");
+  add_info ("sharedlibrary", info_sharedlibrary_command, 
+	    "Status of loaded shared object libraries.");
+
+  add_show_from_set
+    (add_set_cmd ("auto-solib-add", class_support, var_zinteger,
+		  (char *) &auto_solib_add,
+		  "Set autoloading of shared library symbols.\n\
+If nonzero, symbols from all shared object libraries will be loaded\n\
+automatically when the inferior begins execution or when the dynamic linker\n\
+informs gdb that a new library has been loaded.  Otherwise, symbols\n\
+must be loaded manually, using `sharedlibrary'.",
+		  &setlist),
+     &showlist);
+}
+
+
+/* Register that we are able to handle irix5 core file formats.
+   This really is bfd_target_unknown_flavour */
+
+static struct core_fns irix5_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_irix5 ()
+{
+  add_core_fns (&irix5_core_fns);
+}
diff --git a/gdb/isi-xdep.c b/gdb/isi-xdep.c
new file mode 100644
index 0000000..8773c83
--- /dev/null
+++ b/gdb/isi-xdep.c
@@ -0,0 +1,20 @@
+/* Copyright (C) 1993 Free Software Foundation, Inc.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <machine/reg.h>
+int rloc[] = {
+    R0, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, FP, SP, PS, PC
+};
diff --git a/gdb/jv-exp.y b/gdb/jv-exp.y
new file mode 100644
index 0000000..d17c4f3
--- /dev/null
+++ b/gdb/jv-exp.y
@@ -0,0 +1,1466 @@
+/* YACC parser for Java expressions, for GDB.
+   Copyright (C) 1997, 1998, 1999.
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parse a Java expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.  Well, almost always; see ArrayAccess.
+
+   Note that malloc's and realloc's in this file are transformed to
+   xmalloc and xrealloc respectively by the same sed command in the
+   makefile that remaps any other malloc/realloc inserted by the parser
+   generator.  Doing this with #defines and trying to control the interaction
+   with include files (<malloc.h> and <stdlib.h> for example) just became
+   too messy, particularly when such includes can be inserted at random
+   times by the parser generator.  */
+  
+%{
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "expression.h"
+#include "value.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "jv-lang.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h" /* For have_full_symbols and have_partial_symbols */
+
+/* Remap normal yacc parser interface names (yyparse, yylex, yyerror, etc),
+   as well as gratuitiously global symbol names, so we can have multiple
+   yacc generated parsers in gdb.  Note that these are only the variables
+   produced by yacc.  If other parser generators (bison, byacc, etc) produce
+   additional global names that conflict at link time, then those parser
+   generators need to be fixed instead of adding those names to this list. */
+
+#define	yymaxdepth java_maxdepth
+#define	yyparse	java_parse
+#define	yylex	java_lex
+#define	yyerror	java_error
+#define	yylval	java_lval
+#define	yychar	java_char
+#define	yydebug	java_debug
+#define	yypact	java_pact	
+#define	yyr1	java_r1			
+#define	yyr2	java_r2			
+#define	yydef	java_def		
+#define	yychk	java_chk		
+#define	yypgo	java_pgo		
+#define	yyact	java_act		
+#define	yyexca	java_exca
+#define yyerrflag java_errflag
+#define yynerrs	java_nerrs
+#define	yyps	java_ps
+#define	yypv	java_pv
+#define	yys	java_s
+#define	yy_yys	java_yys
+#define	yystate	java_state
+#define	yytmp	java_tmp
+#define	yyv	java_v
+#define	yy_yyv	java_yyv
+#define	yyval	java_val
+#define	yylloc	java_lloc
+#define yyreds	java_reds		/* With YYDEBUG defined */
+#define yytoks	java_toks		/* With YYDEBUG defined */
+#define yylhs	java_yylhs
+#define yylen	java_yylen
+#define yydefred java_yydefred
+#define yydgoto	java_yydgoto
+#define yysindex java_yysindex
+#define yyrindex java_yyrindex
+#define yygindex java_yygindex
+#define yytable	 java_yytable
+#define yycheck	 java_yycheck
+
+#ifndef YYDEBUG
+#define	YYDEBUG	0		/* Default to no yydebug support */
+#endif
+
+int
+yyparse PARAMS ((void));
+
+static int
+yylex PARAMS ((void));
+
+void
+yyerror PARAMS ((char *));
+
+static struct type * java_type_from_name PARAMS ((struct stoken));
+static void push_expression_name PARAMS ((struct stoken));
+static void push_fieldnames PARAMS ((struct stoken));
+
+static struct expression *copy_exp PARAMS ((struct expression *, int));
+static void insert_exp PARAMS ((int, struct expression *));
+
+%}
+
+/* Although the yacc "value" of an expression is not used,
+   since the result is stored in the structure being created,
+   other node types do have values.  */
+
+%union
+  {
+    LONGEST lval;
+    struct {
+      LONGEST val;
+      struct type *type;
+    } typed_val_int;
+    struct {
+      DOUBLEST dval;
+      struct type *type;
+    } typed_val_float;
+    struct symbol *sym;
+    struct type *tval;
+    struct stoken sval;
+    struct ttype tsym;
+    struct symtoken ssym;
+    struct block *bval;
+    enum exp_opcode opcode;
+    struct internalvar *ivar;
+    int *ivec;
+  }
+
+%{
+/* YYSTYPE gets defined by %union */
+static int
+parse_number PARAMS ((char *, int, int, YYSTYPE *));
+%}
+
+%type <lval> rcurly Dims Dims_opt
+%type <tval> ClassOrInterfaceType ClassType /* ReferenceType Type ArrayType */
+%type <tval> IntegralType FloatingPointType NumericType PrimitiveType ArrayType PrimitiveOrArrayType
+
+%token <typed_val_int> INTEGER_LITERAL
+%token <typed_val_float> FLOATING_POINT_LITERAL
+
+%token <sval> IDENTIFIER
+%token <sval> STRING_LITERAL
+%token <lval> BOOLEAN_LITERAL
+%token <tsym> TYPENAME
+%type <sval> Name SimpleName QualifiedName ForcedName
+
+/* A NAME_OR_INT is a symbol which is not known in the symbol table,
+   but which would parse as a valid number in the current input radix.
+   E.g. "c" when input_radix==16.  Depending on the parse, it will be
+   turned into a name or into a number.  */
+
+%token <sval> NAME_OR_INT 
+
+%token ERROR
+
+/* Special type cases, put in to allow the parser to distinguish different
+   legal basetypes.  */
+%token LONG SHORT BYTE INT CHAR BOOLEAN DOUBLE FLOAT
+
+%token VARIABLE
+
+%token <opcode> ASSIGN_MODIFY
+
+%token THIS SUPER NEW
+
+%left ','
+%right '=' ASSIGN_MODIFY
+%right '?'
+%left OROR
+%left ANDAND
+%left '|'
+%left '^'
+%left '&'
+%left EQUAL NOTEQUAL
+%left '<' '>' LEQ GEQ
+%left LSH RSH
+%left '+' '-'
+%left '*' '/' '%'
+%right INCREMENT DECREMENT
+%right '.' '[' '('
+
+
+%%
+
+start   :	exp1
+	|	type_exp
+	;
+
+type_exp:	PrimitiveOrArrayType
+		{
+		  write_exp_elt_opcode(OP_TYPE);
+		  write_exp_elt_type($1);
+		  write_exp_elt_opcode(OP_TYPE);
+		}
+	;
+
+PrimitiveOrArrayType:
+		PrimitiveType
+	|	ArrayType
+	;
+
+StringLiteral:
+	STRING_LITERAL
+		{
+		  write_exp_elt_opcode (OP_STRING);
+		  write_exp_string ($1);
+		  write_exp_elt_opcode (OP_STRING);
+		}
+;
+
+Literal:
+	INTEGER_LITERAL
+		{ write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_type ($1.type);
+		  write_exp_elt_longcst ((LONGEST)($1.val));
+		  write_exp_elt_opcode (OP_LONG); }
+|	NAME_OR_INT
+		{ YYSTYPE val;
+		  parse_number ($1.ptr, $1.length, 0, &val);
+		  write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_type (val.typed_val_int.type);
+		  write_exp_elt_longcst ((LONGEST)val.typed_val_int.val);
+		  write_exp_elt_opcode (OP_LONG);
+		}
+|	FLOATING_POINT_LITERAL
+		{ write_exp_elt_opcode (OP_DOUBLE);
+		  write_exp_elt_type ($1.type);
+		  write_exp_elt_dblcst ($1.dval);
+		  write_exp_elt_opcode (OP_DOUBLE); }
+|	BOOLEAN_LITERAL
+		{ write_exp_elt_opcode (OP_LONG);
+		  write_exp_elt_type (java_boolean_type);
+		  write_exp_elt_longcst ((LONGEST)$1);
+		  write_exp_elt_opcode (OP_LONG); }
+|	StringLiteral
+	;
+
+/* UNUSED:
+Type:
+	PrimitiveType
+|	ReferenceType
+;
+*/
+
+PrimitiveType:
+	NumericType
+|	BOOLEAN
+		{ $$ = java_boolean_type; }
+;
+
+NumericType:
+	IntegralType
+|	FloatingPointType
+;
+
+IntegralType:
+	BYTE
+		{ $$ = java_byte_type; }
+|	SHORT
+		{ $$ = java_short_type; }
+|	INT
+		{ $$ = java_int_type; }
+|	LONG
+		{ $$ = java_long_type; }
+|	CHAR
+		{ $$ = java_char_type; }
+;
+
+FloatingPointType:
+	FLOAT
+		{ $$ = java_float_type; }
+|	DOUBLE
+		{ $$ = java_double_type; }
+;
+
+/* UNUSED:
+ReferenceType:
+	ClassOrInterfaceType
+|	ArrayType
+;
+*/
+
+ClassOrInterfaceType:
+	Name
+		{ $$ = java_type_from_name ($1); }
+;
+
+ClassType:
+	ClassOrInterfaceType
+;
+
+ArrayType:
+	PrimitiveType Dims
+		{ $$ = java_array_type ($1, $2); }
+|	Name Dims
+		{ $$ = java_array_type (java_type_from_name ($1), $2); }
+;
+
+Name:
+	IDENTIFIER
+|	QualifiedName
+;
+
+ForcedName:
+	SimpleName
+|	QualifiedName
+;
+
+SimpleName:
+	IDENTIFIER
+|	NAME_OR_INT
+;
+
+QualifiedName:
+	Name '.' SimpleName
+		{ $$.length = $1.length + $3.length + 1;
+		  if ($1.ptr + $1.length + 1 == $3.ptr
+		      && $1.ptr[$1.length] == '.')
+		    $$.ptr = $1.ptr;  /* Optimization. */
+		  else
+		    {
+		      $$.ptr = (char *) malloc ($$.length + 1);
+		      make_cleanup (free, $$.ptr);
+		      sprintf ($$.ptr, "%.*s.%.*s",
+			       $1.length, $1.ptr, $3.length, $3.ptr);
+		} }
+;
+
+/*
+type_exp:	type
+			{ write_exp_elt_opcode(OP_TYPE);
+			  write_exp_elt_type($1);
+			  write_exp_elt_opcode(OP_TYPE);}
+	;
+	*/
+
+/* Expressions, including the comma operator.  */
+exp1	:	Expression
+	|	exp1 ',' Expression
+			{ write_exp_elt_opcode (BINOP_COMMA); }
+	;
+
+Primary:
+	PrimaryNoNewArray
+|	ArrayCreationExpression
+;
+
+PrimaryNoNewArray:
+	Literal
+|	THIS
+		{ write_exp_elt_opcode (OP_THIS);
+		  write_exp_elt_opcode (OP_THIS); }
+|	'(' Expression ')'
+|	ClassInstanceCreationExpression
+|	FieldAccess
+|	MethodInvocation
+|	ArrayAccess
+|	lcurly ArgumentList rcurly
+		{ write_exp_elt_opcode (OP_ARRAY);
+		  write_exp_elt_longcst ((LONGEST) 0);
+		  write_exp_elt_longcst ((LONGEST) $3);
+		  write_exp_elt_opcode (OP_ARRAY); }
+;
+
+lcurly:
+	'{'
+		{ start_arglist (); }
+;
+
+rcurly:
+	'}'
+		{ $$ = end_arglist () - 1; }
+;
+
+ClassInstanceCreationExpression:
+	NEW ClassType '(' ArgumentList_opt ')'
+		{ error ("FIXME - ClassInstanceCreationExpression"); }
+;
+
+ArgumentList:
+	Expression
+		{ arglist_len = 1; }
+|	ArgumentList ',' Expression
+		{ arglist_len++; }
+;
+
+ArgumentList_opt:
+	/* EMPTY */
+		{ arglist_len = 0; }
+| ArgumentList
+;
+
+ArrayCreationExpression:
+	NEW PrimitiveType DimExprs Dims_opt
+		{ error ("FIXME - ArrayCreatiionExpression"); }
+|	NEW ClassOrInterfaceType DimExprs Dims_opt
+		{ error ("FIXME - ArrayCreatiionExpression"); }
+;
+
+DimExprs:
+	DimExpr
+|	DimExprs DimExpr
+;
+
+DimExpr:
+	'[' Expression ']'
+;
+
+Dims:
+	'[' ']'
+		{ $$ = 1; }
+|	Dims '[' ']'
+	{ $$ = $1 + 1; }
+;
+
+Dims_opt:
+	Dims
+|	/* EMPTY */
+		{ $$ = 0; }
+;
+
+FieldAccess:
+	Primary '.' SimpleName
+		{ push_fieldnames ($3); }
+|	VARIABLE '.' SimpleName
+		{ push_fieldnames ($3); }
+/*|	SUPER '.' SimpleName { FIXME } */
+;
+
+MethodInvocation:
+	Name '(' ArgumentList_opt ')'
+		{ error ("method invocation not implemented"); }
+|	Primary '.' SimpleName '(' ArgumentList_opt ')'
+		{ error ("method invocation not implemented"); }
+|	SUPER '.' SimpleName '(' ArgumentList_opt ')'
+		{ error ("method invocation not implemented"); }
+;
+
+ArrayAccess:
+	Name '[' Expression ']'
+                {
+                  /* Emit code for the Name now, then exchange it in the
+		     expout array with the Expression's code.  We could
+		     introduce a OP_SWAP code or a reversed version of
+		     BINOP_SUBSCRIPT, but that makes the rest of GDB pay
+		     for our parsing kludges.  */
+		  struct expression *name_expr;
+
+		  push_expression_name ($1);
+		  name_expr = copy_exp (expout, expout_ptr);
+		  expout_ptr -= name_expr->nelts;
+		  insert_exp (expout_ptr-length_of_subexp (expout, expout_ptr),
+			      name_expr);
+		  free (name_expr);
+		  write_exp_elt_opcode (BINOP_SUBSCRIPT);
+		}
+|	VARIABLE '[' Expression ']'
+		{ write_exp_elt_opcode (BINOP_SUBSCRIPT); }
+|	PrimaryNoNewArray '[' Expression ']'
+		{ write_exp_elt_opcode (BINOP_SUBSCRIPT); }
+;
+
+PostfixExpression:
+	Primary
+|	Name
+		{ push_expression_name ($1); }
+|	VARIABLE
+		/* Already written by write_dollar_variable. */
+|	PostIncrementExpression
+|	PostDecrementExpression
+;
+
+PostIncrementExpression:
+	PostfixExpression INCREMENT
+		{ write_exp_elt_opcode (UNOP_POSTINCREMENT); }
+;
+
+PostDecrementExpression:
+	PostfixExpression DECREMENT
+		{ write_exp_elt_opcode (UNOP_POSTDECREMENT); }
+;
+
+UnaryExpression:
+	PreIncrementExpression
+|	PreDecrementExpression
+|	'+' UnaryExpression
+|	'-' UnaryExpression
+		{ write_exp_elt_opcode (UNOP_NEG); }
+|	'*' UnaryExpression 
+		{ write_exp_elt_opcode (UNOP_IND); } /*FIXME not in Java  */
+|	UnaryExpressionNotPlusMinus
+;
+
+PreIncrementExpression:
+	INCREMENT UnaryExpression
+		{ write_exp_elt_opcode (UNOP_PREINCREMENT); }
+;
+
+PreDecrementExpression:
+	DECREMENT UnaryExpression
+		{ write_exp_elt_opcode (UNOP_PREDECREMENT); }
+;
+
+UnaryExpressionNotPlusMinus:
+	PostfixExpression
+|	'~' UnaryExpression
+		{ write_exp_elt_opcode (UNOP_COMPLEMENT); }
+|	'!' UnaryExpression
+		{ write_exp_elt_opcode (UNOP_LOGICAL_NOT); }
+|	CastExpression
+	;
+
+CastExpression:
+	'(' PrimitiveType Dims_opt ')' UnaryExpression
+		{ write_exp_elt_opcode (UNOP_CAST);
+		  write_exp_elt_type (java_array_type ($2, $3));
+		  write_exp_elt_opcode (UNOP_CAST); }
+|	'(' Expression ')' UnaryExpressionNotPlusMinus
+		{
+		  int exp_size = expout_ptr;
+		  int last_exp_size = length_of_subexp(expout, expout_ptr);
+		  struct type *type;
+		  int i;
+		  int base = expout_ptr - last_exp_size - 3;
+		  if (base < 0 || expout->elts[base+2].opcode != OP_TYPE)
+		    error ("invalid cast expression");
+		  type = expout->elts[base+1].type;
+		  /* Remove the 'Expression' and slide the
+		     UnaryExpressionNotPlusMinus down to replace it. */
+		  for (i = 0;  i < last_exp_size;  i++)
+		    expout->elts[base + i] = expout->elts[base + i + 3];
+		  expout_ptr -= 3;
+		  if (TYPE_CODE (type) == TYPE_CODE_STRUCT)
+		    type = lookup_pointer_type (type);
+		  write_exp_elt_opcode (UNOP_CAST);
+		  write_exp_elt_type (type);
+		  write_exp_elt_opcode (UNOP_CAST);
+		}
+|	'(' Name Dims ')' UnaryExpressionNotPlusMinus
+		{ write_exp_elt_opcode (UNOP_CAST);
+		  write_exp_elt_type (java_array_type (java_type_from_name ($2), $3));
+		  write_exp_elt_opcode (UNOP_CAST); }
+;
+
+
+MultiplicativeExpression:
+	UnaryExpression
+|	MultiplicativeExpression '*' UnaryExpression
+		{ write_exp_elt_opcode (BINOP_MUL); }
+|	MultiplicativeExpression '/' UnaryExpression
+		{ write_exp_elt_opcode (BINOP_DIV); }
+|	MultiplicativeExpression '%' UnaryExpression
+		{ write_exp_elt_opcode (BINOP_REM); }
+;
+
+AdditiveExpression:
+	MultiplicativeExpression
+|	AdditiveExpression '+' MultiplicativeExpression
+		{ write_exp_elt_opcode (BINOP_ADD); }
+|	AdditiveExpression '-' MultiplicativeExpression
+		{ write_exp_elt_opcode (BINOP_SUB); }
+;
+
+ShiftExpression:
+	AdditiveExpression
+|	ShiftExpression LSH AdditiveExpression
+		{ write_exp_elt_opcode (BINOP_LSH); }
+|	ShiftExpression RSH AdditiveExpression
+		{ write_exp_elt_opcode (BINOP_RSH); }
+/* |	ShiftExpression >>> AdditiveExpression { FIXME } */
+;
+
+RelationalExpression:
+	ShiftExpression
+|	RelationalExpression '<' ShiftExpression
+		{ write_exp_elt_opcode (BINOP_LESS); }
+|	RelationalExpression '>' ShiftExpression
+		{ write_exp_elt_opcode (BINOP_GTR); }
+|	RelationalExpression LEQ ShiftExpression
+		{ write_exp_elt_opcode (BINOP_LEQ); }
+|	RelationalExpression GEQ ShiftExpression
+		{ write_exp_elt_opcode (BINOP_GEQ); }
+/* | RelationalExpresion INSTANCEOF ReferenceType { FIXME } */
+;
+
+EqualityExpression:
+	RelationalExpression
+|	EqualityExpression EQUAL RelationalExpression
+		{ write_exp_elt_opcode (BINOP_EQUAL); }
+|	EqualityExpression NOTEQUAL RelationalExpression
+		{ write_exp_elt_opcode (BINOP_NOTEQUAL); }
+;
+
+AndExpression:
+	EqualityExpression
+|	AndExpression '&' EqualityExpression
+		{ write_exp_elt_opcode (BINOP_BITWISE_AND); }
+;
+
+ExclusiveOrExpression:
+	AndExpression
+|	ExclusiveOrExpression '^' AndExpression
+		{ write_exp_elt_opcode (BINOP_BITWISE_XOR); }
+;
+InclusiveOrExpression:
+	ExclusiveOrExpression
+|	InclusiveOrExpression '|' ExclusiveOrExpression
+		{ write_exp_elt_opcode (BINOP_BITWISE_IOR); }
+;
+
+ConditionalAndExpression:
+	InclusiveOrExpression
+|	ConditionalAndExpression ANDAND InclusiveOrExpression
+		{ write_exp_elt_opcode (BINOP_LOGICAL_AND); }
+;
+
+ConditionalOrExpression:
+	ConditionalAndExpression
+|	ConditionalOrExpression OROR ConditionalAndExpression
+		{ write_exp_elt_opcode (BINOP_LOGICAL_OR); }
+;
+
+ConditionalExpression:
+	ConditionalOrExpression
+|	ConditionalOrExpression '?' Expression ':' ConditionalExpression
+		{ write_exp_elt_opcode (TERNOP_COND); }
+;
+
+AssignmentExpression:
+	ConditionalExpression
+|	Assignment
+;
+			  
+Assignment:
+	LeftHandSide '=' ConditionalExpression
+		{ write_exp_elt_opcode (BINOP_ASSIGN); }
+|	LeftHandSide ASSIGN_MODIFY ConditionalExpression
+		{ write_exp_elt_opcode (BINOP_ASSIGN_MODIFY);
+		  write_exp_elt_opcode ($2);
+		  write_exp_elt_opcode (BINOP_ASSIGN_MODIFY); }
+;
+
+LeftHandSide:
+	ForcedName
+		{ push_expression_name ($1); }
+|	VARIABLE
+		/* Already written by write_dollar_variable. */
+|	FieldAccess
+|	ArrayAccess
+;
+
+
+Expression:
+	AssignmentExpression
+;
+
+%%
+/* Take care of parsing a number (anything that starts with a digit).
+   Set yylval and return the token type; update lexptr.
+   LEN is the number of characters in it.  */
+
+/*** Needs some error checking for the float case ***/
+
+static int
+parse_number (p, len, parsed_float, putithere)
+     register char *p;
+     register int len;
+     int parsed_float;
+     YYSTYPE *putithere;
+{
+  register ULONGEST n = 0;
+  ULONGEST limit, limit_div_base;
+
+  register int c;
+  register int base = input_radix;
+
+  struct type *type;
+
+  if (parsed_float)
+    {
+      /* It's a float since it contains a point or an exponent.  */
+      char c;
+      int num = 0;	/* number of tokens scanned by scanf */
+      char saved_char = p[len];
+
+      p[len] = 0;	/* null-terminate the token */
+      if (sizeof (putithere->typed_val_float.dval) <= sizeof (float))
+	num = sscanf (p, "%g%c", (float *) &putithere->typed_val_float.dval, &c);
+      else if (sizeof (putithere->typed_val_float.dval) <= sizeof (double))
+	num = sscanf (p, "%lg%c", (double *) &putithere->typed_val_float.dval, &c);
+      else
+	{
+#ifdef SCANF_HAS_LONG_DOUBLE
+	  num = sscanf (p, "%Lg%c", &putithere->typed_val_float.dval, &c);
+#else
+	  /* Scan it into a double, then assign it to the long double.
+	     This at least wins with values representable in the range
+	     of doubles. */
+	  double temp;
+	  num = sscanf (p, "%lg%c", &temp, &c);
+	  putithere->typed_val_float.dval = temp;
+#endif
+	}
+      p[len] = saved_char;	/* restore the input stream */
+      if (num != 1) 		/* check scanf found ONLY a float ... */
+	return ERROR;
+      /* See if it has `f' or `d' suffix (float or double).  */
+
+      c = tolower (p[len - 1]);
+
+      if (c == 'f' || c == 'F')
+	putithere->typed_val_float.type = builtin_type_float;
+      else if (isdigit (c) || c == '.' || c == 'd' || c == 'D')
+	putithere->typed_val_float.type = builtin_type_double;
+      else
+	return ERROR;
+
+      return FLOATING_POINT_LITERAL;
+    }
+
+  /* Handle base-switching prefixes 0x, 0t, 0d, 0 */
+  if (p[0] == '0')
+    switch (p[1])
+      {
+      case 'x':
+      case 'X':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 16;
+	    len -= 2;
+	  }
+	break;
+
+      case 't':
+      case 'T':
+      case 'd':
+      case 'D':
+	if (len >= 3)
+	  {
+	    p += 2;
+	    base = 10;
+	    len -= 2;
+	  }
+	break;
+
+      default:
+	base = 8;
+	break;
+      }
+
+  c = p[len-1];
+  limit = (ULONGEST)0xffffffff;
+  if (c == 'l' || c == 'L')
+    {
+      type = java_long_type;
+      len--;
+      /* A paranoid calculation of (1<<64)-1. */
+      limit = ((limit << 16) << 16) | limit;
+    }
+  else
+    {
+      type = java_int_type;
+    }
+  limit_div_base = limit / (ULONGEST) base;
+
+  while (--len >= 0)
+    {
+      c = *p++;
+      if (c >= '0' && c <= '9')
+	c -= '0';
+      else if (c >= 'A' && c <= 'Z')
+	c -= 'A' - 10;
+      else if (c >= 'a' && c <= 'z')
+	c -= 'a' - 10;
+      else
+	return ERROR;	/* Char not a digit */
+      if (c >= base)
+	return ERROR;
+      if (n > limit_div_base
+	  || (n *= base) > limit - c)
+	error ("Numeric constant too large.");
+      n += c;
+	}
+
+   putithere->typed_val_int.val = n;
+   putithere->typed_val_int.type = type;
+   return INTEGER_LITERAL;
+}
+
+struct token
+{
+  char *operator;
+  int token;
+  enum exp_opcode opcode;
+};
+
+static const struct token tokentab3[] =
+  {
+    {">>=", ASSIGN_MODIFY, BINOP_RSH},
+    {"<<=", ASSIGN_MODIFY, BINOP_LSH}
+  };
+
+static const struct token tokentab2[] =
+  {
+    {"+=", ASSIGN_MODIFY, BINOP_ADD},
+    {"-=", ASSIGN_MODIFY, BINOP_SUB},
+    {"*=", ASSIGN_MODIFY, BINOP_MUL},
+    {"/=", ASSIGN_MODIFY, BINOP_DIV},
+    {"%=", ASSIGN_MODIFY, BINOP_REM},
+    {"|=", ASSIGN_MODIFY, BINOP_BITWISE_IOR},
+    {"&=", ASSIGN_MODIFY, BINOP_BITWISE_AND},
+    {"^=", ASSIGN_MODIFY, BINOP_BITWISE_XOR},
+    {"++", INCREMENT, BINOP_END},
+    {"--", DECREMENT, BINOP_END},
+    {"&&", ANDAND, BINOP_END},
+    {"||", OROR, BINOP_END},
+    {"<<", LSH, BINOP_END},
+    {">>", RSH, BINOP_END},
+    {"==", EQUAL, BINOP_END},
+    {"!=", NOTEQUAL, BINOP_END},
+    {"<=", LEQ, BINOP_END},
+    {">=", GEQ, BINOP_END}
+  };
+
+/* Read one token, getting characters through lexptr.  */
+
+static int
+yylex ()
+{
+  int c;
+  int namelen;
+  unsigned int i;
+  char *tokstart;
+  char *tokptr;
+  int tempbufindex;
+  static char *tempbuf;
+  static int tempbufsize;
+  
+ retry:
+
+  tokstart = lexptr;
+  /* See if it is a special token of length 3.  */
+  for (i = 0; i < sizeof tokentab3 / sizeof tokentab3[0]; i++)
+    if (STREQN (tokstart, tokentab3[i].operator, 3))
+      {
+	lexptr += 3;
+	yylval.opcode = tokentab3[i].opcode;
+	return tokentab3[i].token;
+      }
+
+  /* See if it is a special token of length 2.  */
+  for (i = 0; i < sizeof tokentab2 / sizeof tokentab2[0]; i++)
+    if (STREQN (tokstart, tokentab2[i].operator, 2))
+      {
+	lexptr += 2;
+	yylval.opcode = tokentab2[i].opcode;
+	return tokentab2[i].token;
+      }
+
+  switch (c = *tokstart)
+    {
+    case 0:
+      return 0;
+
+    case ' ':
+    case '\t':
+    case '\n':
+      lexptr++;
+      goto retry;
+
+    case '\'':
+      /* We either have a character constant ('0' or '\177' for example)
+	 or we have a quoted symbol reference ('foo(int,int)' in C++
+	 for example). */
+      lexptr++;
+      c = *lexptr++;
+      if (c == '\\')
+	c = parse_escape (&lexptr);
+      else if (c == '\'')
+	error ("Empty character constant.");
+
+      yylval.typed_val_int.val = c;
+      yylval.typed_val_int.type = builtin_type_char;
+
+      c = *lexptr++;
+      if (c != '\'')
+	{
+	  namelen = skip_quoted (tokstart) - tokstart;
+	  if (namelen > 2)
+	    {
+	      lexptr = tokstart + namelen;
+	      if (lexptr[-1] != '\'')
+		error ("Unmatched single quote.");
+	      namelen -= 2;
+	      tokstart++;
+	      goto tryname;
+	    }
+	  error ("Invalid character constant.");
+	}
+      return INTEGER_LITERAL;
+
+    case '(':
+      paren_depth++;
+      lexptr++;
+      return c;
+
+    case ')':
+      if (paren_depth == 0)
+	return 0;
+      paren_depth--;
+      lexptr++;
+      return c;
+
+    case ',':
+      if (comma_terminates && paren_depth == 0)
+	return 0;
+      lexptr++;
+      return c;
+
+    case '.':
+      /* Might be a floating point number.  */
+      if (lexptr[1] < '0' || lexptr[1] > '9')
+	goto symbol;		/* Nope, must be a symbol. */
+      /* FALL THRU into number case.  */
+
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
+      {
+	/* It's a number.  */
+	int got_dot = 0, got_e = 0, toktype;
+	register char *p = tokstart;
+	int hex = input_radix > 10;
+
+	if (c == '0' && (p[1] == 'x' || p[1] == 'X'))
+	  {
+	    p += 2;
+	    hex = 1;
+	  }
+	else if (c == '0' && (p[1]=='t' || p[1]=='T' || p[1]=='d' || p[1]=='D'))
+	  {
+	    p += 2;
+	    hex = 0;
+	  }
+
+	for (;; ++p)
+	  {
+	    /* This test includes !hex because 'e' is a valid hex digit
+	       and thus does not indicate a floating point number when
+	       the radix is hex.  */
+	    if (!hex && !got_e && (*p == 'e' || *p == 'E'))
+	      got_dot = got_e = 1;
+	    /* This test does not include !hex, because a '.' always indicates
+	       a decimal floating point number regardless of the radix.  */
+	    else if (!got_dot && *p == '.')
+	      got_dot = 1;
+	    else if (got_e && (p[-1] == 'e' || p[-1] == 'E')
+		     && (*p == '-' || *p == '+'))
+	      /* This is the sign of the exponent, not the end of the
+		 number.  */
+	      continue;
+	    /* We will take any letters or digits.  parse_number will
+	       complain if past the radix, or if L or U are not final.  */
+	    else if ((*p < '0' || *p > '9')
+		     && ((*p < 'a' || *p > 'z')
+				  && (*p < 'A' || *p > 'Z')))
+	      break;
+	  }
+	toktype = parse_number (tokstart, p - tokstart, got_dot|got_e, &yylval);
+        if (toktype == ERROR)
+	  {
+	    char *err_copy = (char *) alloca (p - tokstart + 1);
+
+	    memcpy (err_copy, tokstart, p - tokstart);
+	    err_copy[p - tokstart] = 0;
+	    error ("Invalid number \"%s\".", err_copy);
+	  }
+	lexptr = p;
+	return toktype;
+      }
+
+    case '+':
+    case '-':
+    case '*':
+    case '/':
+    case '%':
+    case '|':
+    case '&':
+    case '^':
+    case '~':
+    case '!':
+    case '<':
+    case '>':
+    case '[':
+    case ']':
+    case '?':
+    case ':':
+    case '=':
+    case '{':
+    case '}':
+    symbol:
+      lexptr++;
+      return c;
+
+    case '"':
+
+      /* Build the gdb internal form of the input string in tempbuf,
+	 translating any standard C escape forms seen.  Note that the
+	 buffer is null byte terminated *only* for the convenience of
+	 debugging gdb itself and printing the buffer contents when
+	 the buffer contains no embedded nulls.  Gdb does not depend
+	 upon the buffer being null byte terminated, it uses the length
+	 string instead.  This allows gdb to handle C strings (as well
+	 as strings in other languages) with embedded null bytes */
+
+      tokptr = ++tokstart;
+      tempbufindex = 0;
+
+      do {
+	/* Grow the static temp buffer if necessary, including allocating
+	   the first one on demand. */
+	if (tempbufindex + 1 >= tempbufsize)
+	  {
+	    tempbuf = (char *) realloc (tempbuf, tempbufsize += 64);
+	  }
+	switch (*tokptr)
+	  {
+	  case '\0':
+	  case '"':
+	    /* Do nothing, loop will terminate. */
+	    break;
+	  case '\\':
+	    tokptr++;
+	    c = parse_escape (&tokptr);
+	    if (c == -1)
+	      {
+		continue;
+	      }
+	    tempbuf[tempbufindex++] = c;
+	    break;
+	  default:
+	    tempbuf[tempbufindex++] = *tokptr++;
+	    break;
+	  }
+      } while ((*tokptr != '"') && (*tokptr != '\0'));
+      if (*tokptr++ != '"')
+	{
+	  error ("Unterminated string in expression.");
+	}
+      tempbuf[tempbufindex] = '\0';	/* See note above */
+      yylval.sval.ptr = tempbuf;
+      yylval.sval.length = tempbufindex;
+      lexptr = tokptr;
+      return (STRING_LITERAL);
+    }
+
+  if (!(c == '_' || c == '$'
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
+    /* We must have come across a bad character (e.g. ';').  */
+    error ("Invalid character '%c' in expression.", c);
+
+  /* It's a name.  See how long it is.  */
+  namelen = 0;
+  for (c = tokstart[namelen];
+       (c == '_'
+	|| c == '$'
+	|| (c >= '0' && c <= '9')
+	|| (c >= 'a' && c <= 'z')
+	|| (c >= 'A' && c <= 'Z')
+	|| c == '<');
+       )
+    {
+      if (c == '<')
+	{
+	  int i = namelen;
+	  while (tokstart[++i] && tokstart[i] != '>');
+	  if (tokstart[i] == '>')
+	    namelen = i;
+	}
+       c = tokstart[++namelen];
+     }
+
+  /* The token "if" terminates the expression and is NOT 
+     removed from the input stream.  */
+  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
+    {
+      return 0;
+    }
+
+  lexptr += namelen;
+
+  tryname:
+
+  /* Catch specific keywords.  Should be done with a data structure.  */
+  switch (namelen)
+    {
+    case 7:
+      if (STREQN (tokstart, "boolean", 7))
+	return BOOLEAN;
+      break;
+    case 6:
+      if (STREQN (tokstart, "double", 6))      
+	return DOUBLE;
+      break;
+    case 5:
+      if (STREQN (tokstart, "short", 5))
+	return SHORT;
+      if (STREQN (tokstart, "false", 5))
+	{
+	  yylval.lval = 0;
+	  return BOOLEAN_LITERAL;
+	}
+      if (STREQN (tokstart, "super", 5))
+	return SUPER;
+      if (STREQN (tokstart, "float", 5))
+	return FLOAT;
+      break;
+    case 4:
+      if (STREQN (tokstart, "long", 4))
+	return LONG;
+      if (STREQN (tokstart, "byte", 4))
+	return BYTE;
+      if (STREQN (tokstart, "char", 4))
+	return CHAR;
+      if (STREQN (tokstart, "true", 4))
+	{
+	  yylval.lval = 1;
+	  return BOOLEAN_LITERAL;
+	}
+      if (current_language->la_language == language_cplus
+	  && STREQN (tokstart, "this", 4))
+	{
+	  static const char this_name[] =
+				 { CPLUS_MARKER, 't', 'h', 'i', 's', '\0' };
+
+	  if (lookup_symbol (this_name, expression_context_block,
+			     VAR_NAMESPACE, (int *) NULL,
+			     (struct symtab **) NULL))
+	    return THIS;
+	}
+      break;
+    case 3:
+      if (STREQN (tokstart, "int", 3))
+	return INT;
+      if (STREQN (tokstart, "new", 3))
+	return NEW;
+      break;
+    default:
+      break;
+    }
+
+  yylval.sval.ptr = tokstart;
+  yylval.sval.length = namelen;
+
+  if (*tokstart == '$')
+    {
+      write_dollar_variable (yylval.sval);
+      return VARIABLE;
+    }
+
+  /* Input names that aren't symbols but ARE valid hex numbers,
+     when the input radix permits them, can be names or numbers
+     depending on the parse.  Note we support radixes > 16 here.  */
+  if (((tokstart[0] >= 'a' && tokstart[0] < 'a' + input_radix - 10) ||
+       (tokstart[0] >= 'A' && tokstart[0] < 'A' + input_radix - 10)))
+    {
+      YYSTYPE newlval;	/* Its value is ignored.  */
+      int hextype = parse_number (tokstart, namelen, 0, &newlval);
+      if (hextype == INTEGER_LITERAL)
+	return NAME_OR_INT;
+    }
+  return IDENTIFIER;
+}
+
+void
+yyerror (msg)
+     char *msg;
+{
+  error ("A %s in expression, near `%s'.", (msg ? msg : "error"), lexptr);
+}
+
+static struct type *
+java_type_from_name (name)
+     struct stoken name;
+ 
+{
+  char *tmp = copy_name (name);
+  struct type *typ = java_lookup_class (tmp);
+  if (typ == NULL || TYPE_CODE (typ) != TYPE_CODE_STRUCT)
+    error ("No class named %s.", tmp);
+  return typ;
+}
+
+/* If NAME is a valid variable name in this scope, push it and return 1.
+   Otherwise, return 0. */
+
+static int
+push_variable (name)
+     struct stoken name;
+ 
+{
+  char *tmp = copy_name (name);
+  int is_a_field_of_this = 0;
+  struct symbol *sym;
+  sym = lookup_symbol (tmp, expression_context_block, VAR_NAMESPACE,
+		       &is_a_field_of_this, (struct symtab **) NULL);
+  if (sym && SYMBOL_CLASS (sym) != LOC_TYPEDEF)
+    {
+      if (symbol_read_needs_frame (sym))
+	{
+	  if (innermost_block == 0 ||
+	      contained_in (block_found, innermost_block))
+	    innermost_block = block_found;
+	}
+
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      /* We want to use the selected frame, not another more inner frame
+	 which happens to be in the same block.  */
+      write_exp_elt_block (NULL);
+      write_exp_elt_sym (sym);
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      return 1;
+    }
+  if (is_a_field_of_this)
+    {
+      /* it hangs off of `this'.  Must not inadvertently convert from a
+	 method call to data ref.  */
+      if (innermost_block == 0 || 
+	  contained_in (block_found, innermost_block))
+	innermost_block = block_found;
+      write_exp_elt_opcode (OP_THIS);
+      write_exp_elt_opcode (OP_THIS);
+      write_exp_elt_opcode (STRUCTOP_PTR);
+      write_exp_string (name);
+      write_exp_elt_opcode (STRUCTOP_PTR);
+      return 1;
+    }
+  return 0;
+}
+
+/* Assuming a reference expression has been pushed, emit the
+   STRUCTOP_STRUCT ops to access the field named NAME.  If NAME is a
+   qualified name (has '.'), generate a field access for each part. */
+
+static void
+push_fieldnames (name)
+     struct stoken name;
+{
+  int i;
+  struct stoken token;
+  token.ptr = name.ptr;
+  for (i = 0;  ;  i++)
+    {
+      if (i == name.length || name.ptr[i] == '.')
+	{
+	  /* token.ptr is start of current field name. */
+	  token.length = &name.ptr[i] - token.ptr;
+	  write_exp_elt_opcode (STRUCTOP_STRUCT);
+	  write_exp_string (token);
+	  write_exp_elt_opcode (STRUCTOP_STRUCT);
+	  token.ptr += token.length + 1;
+	}
+      if (i >= name.length)
+	break;
+    }
+}
+
+/* Helper routine for push_expression_name.
+   Handle a qualified name, where DOT_INDEX is the index of the first '.' */
+
+static void
+push_qualified_expression_name (name, dot_index)
+     struct stoken name;
+     int dot_index;
+{
+  struct stoken token;
+  char *tmp;
+  struct type *typ;
+
+  token.ptr = name.ptr;
+  token.length = dot_index;
+
+  if (push_variable (token))
+    {
+      token.ptr = name.ptr + dot_index + 1;
+      token.length = name.length - dot_index - 1;
+      push_fieldnames (token);
+      return;
+    }
+
+  token.ptr = name.ptr;
+  for (;;)
+    {
+      token.length = dot_index;
+      tmp = copy_name (token);
+      typ = java_lookup_class (tmp);
+      if (typ != NULL)
+	{
+	  if (dot_index == name.length)
+	    {
+	      write_exp_elt_opcode(OP_TYPE);
+	      write_exp_elt_type(typ);
+	      write_exp_elt_opcode(OP_TYPE);
+	      return;
+	    }
+	  dot_index++;  /* Skip '.' */
+	  name.ptr += dot_index;
+	  name.length -= dot_index;
+	  dot_index = 0;
+	  while (dot_index < name.length && name.ptr[dot_index] != '.') 
+	    dot_index++;
+	  token.ptr = name.ptr;
+	  token.length = dot_index;
+	  write_exp_elt_opcode (OP_SCOPE);
+	  write_exp_elt_type (typ);
+	  write_exp_string (token);
+	  write_exp_elt_opcode (OP_SCOPE); 
+	  if (dot_index < name.length)
+	    {
+	      dot_index++;
+	      name.ptr += dot_index;
+	      name.length -= dot_index;
+	      push_fieldnames (name);
+	    }
+	  return;
+	}
+      else if (dot_index >= name.length)
+	break;
+      dot_index++;  /* Skip '.' */
+      while (dot_index < name.length && name.ptr[dot_index] != '.')
+	dot_index++;
+    }
+  error ("unknown type `%.*s'", name.length, name.ptr);
+}
+
+/* Handle Name in an expression (or LHS).
+   Handle VAR, TYPE, TYPE.FIELD1....FIELDN and VAR.FIELD1....FIELDN. */
+
+static void
+push_expression_name (name)
+     struct stoken name;
+{
+  char *tmp;
+  struct type *typ;
+  char *ptr;
+  int i;
+
+  for (i = 0;  i < name.length;  i++)
+    {
+      if (name.ptr[i] == '.')
+	{
+	  /* It's a Qualified Expression Name. */
+	  push_qualified_expression_name (name, i);
+	  return;
+	}
+    }
+
+  /* It's a Simple Expression Name. */
+  
+  if (push_variable (name))
+    return;
+  tmp = copy_name (name);
+  typ = java_lookup_class (tmp);
+  if (typ != NULL)
+    {
+      write_exp_elt_opcode(OP_TYPE);
+      write_exp_elt_type(typ);
+      write_exp_elt_opcode(OP_TYPE);
+    }
+  else
+    {
+      struct minimal_symbol *msymbol;
+
+      msymbol = lookup_minimal_symbol (tmp, NULL, NULL);
+      if (msymbol != NULL)
+	{
+	  write_exp_msymbol (msymbol,
+			     lookup_function_type (builtin_type_int),
+			     builtin_type_int);
+	}
+      else if (!have_full_symbols () && !have_partial_symbols ())
+	error ("No symbol table is loaded.  Use the \"file\" command.");
+      else
+	error ("No symbol \"%s\" in current context.", tmp);
+    }
+
+}
+
+
+/* The following two routines, copy_exp and insert_exp, aren't specific to
+   Java, so they could go in parse.c, but their only purpose is to support
+   the parsing kludges we use in this file, so maybe it's best to isolate
+   them here.  */
+
+/* Copy the expression whose last element is at index ENDPOS - 1 in EXPR
+   into a freshly malloc'ed struct expression.  Its language_defn is set
+   to null.  */
+static struct expression *
+copy_exp (expr, endpos)
+     struct expression *expr;
+     int endpos;
+{
+  int len = length_of_subexp (expr, endpos);
+  struct expression *new
+    = (struct expression *) malloc (sizeof (*new) + EXP_ELEM_TO_BYTES (len));
+  new->nelts = len;
+  memcpy (new->elts, expr->elts + endpos - len, EXP_ELEM_TO_BYTES (len));
+  new->language_defn = 0;
+
+  return new;
+}
+
+/* Insert the expression NEW into the current expression (expout) at POS.  */
+static void
+insert_exp (pos, new)
+     int pos;
+     struct expression *new;
+{
+  int newlen = new->nelts;
+
+  /* Grow expout if necessary.  In this function's only use at present,
+     this should never be necessary.  */
+  if (expout_ptr + newlen > expout_size)
+    {
+      expout_size = max (expout_size * 2, expout_ptr + newlen + 10);
+      expout = (struct expression *)
+	realloc ((char *) expout, (sizeof (struct expression)
+				    + EXP_ELEM_TO_BYTES (expout_size)));
+    }
+
+  {
+    int i;
+
+    for (i = expout_ptr - 1; i >= pos; i--)
+      expout->elts[i + newlen] = expout->elts[i];
+  }
+  
+  memcpy (expout->elts + pos, new->elts, EXP_ELEM_TO_BYTES (newlen));
+  expout_ptr += newlen;
+}
diff --git a/gdb/jv-lang.c b/gdb/jv-lang.c
new file mode 100644
index 0000000..a98147a
--- /dev/null
+++ b/gdb/jv-lang.c
@@ -0,0 +1,1088 @@
+/* Java language support routines for GDB, the GNU debugger.
+   Copyright 1997, 1998, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "gdbtypes.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "c-lang.h"
+#include "jv-lang.h"
+#include "gdbcore.h"
+#include <ctype.h>
+
+struct type *java_int_type;
+struct type *java_byte_type;
+struct type *java_short_type;
+struct type *java_long_type;
+struct type *java_boolean_type;
+struct type *java_char_type;
+struct type *java_float_type;
+struct type *java_double_type;
+struct type *java_void_type;
+
+static int java_demangled_signature_length PARAMS ((char*));
+static void java_demangled_signature_copy PARAMS ((char*, char*));
+
+static void java_emit_char PARAMS ((int c, GDB_FILE *stream, int quoter));
+
+/* This objfile contains symtabs that have been dynamically created
+   to record dynamically loaded Java classes and dynamically
+   compiled java methods. */
+
+static struct objfile *dynamics_objfile = NULL;
+
+static struct type *java_link_class_type PARAMS ((struct type *, value_ptr));
+
+static struct objfile *
+get_dynamics_objfile ()
+{
+  if (dynamics_objfile == NULL)
+    {
+      dynamics_objfile = allocate_objfile (NULL, 0, 0, 0);
+    }
+  return dynamics_objfile;
+}
+
+#if 1
+/* symtab contains classes read from the inferior. */
+
+static struct symtab *class_symtab = NULL;
+
+/* Maximum number of class in class_symtab before relocation is needed. */
+
+static int class_symtab_space;
+
+struct symtab *
+get_java_class_symtab ()
+{
+  if (class_symtab == NULL)
+    {
+      struct objfile *objfile = get_dynamics_objfile();
+      struct blockvector *bv;
+      struct block *bl;
+      class_symtab = allocate_symtab ("<java-classes>", objfile);
+      class_symtab->language = language_java;
+      bv = (struct blockvector *)
+	obstack_alloc (&objfile->symbol_obstack, sizeof (struct blockvector));
+      BLOCKVECTOR_NBLOCKS (bv) = 1;
+      BLOCKVECTOR (class_symtab) = bv;
+
+      /* Allocate dummy STATIC_BLOCK. */
+      bl = (struct block *)
+	obstack_alloc (&objfile->symbol_obstack, sizeof (struct block));
+      BLOCK_NSYMS (bl) = 0;
+      BLOCK_START (bl) = 0;
+      BLOCK_END (bl) = 0;
+      BLOCK_FUNCTION (bl) = NULL;
+      BLOCK_SUPERBLOCK (bl) = NULL;
+      BLOCK_GCC_COMPILED (bl) = 0;
+      BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK) = bl;
+
+      /* Allocate GLOBAL_BLOCK.  This has to be relocatable. */
+      class_symtab_space = 128;
+      bl = (struct block *)
+	mmalloc (objfile->md,
+		 sizeof (struct block)
+		 + ((class_symtab_space - 1) * sizeof (struct symbol *)));
+      *bl = *BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+      BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK) = bl;
+      class_symtab->free_ptr = (char *) bl;
+    }
+  return class_symtab;
+}
+
+static void
+add_class_symtab_symbol (sym)
+     struct symbol *sym;
+{
+  struct symtab *symtab = get_java_class_symtab ();
+  struct blockvector *bv = BLOCKVECTOR (symtab);
+  struct block *bl = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+  if (BLOCK_NSYMS (bl) >= class_symtab_space)
+    {
+      /* Need to re-allocate. */
+      class_symtab_space *= 2;
+      bl = (struct block *)
+	mrealloc (symtab->objfile->md, bl,
+		  sizeof (struct block)
+		  + ((class_symtab_space - 1) * sizeof (struct symbol *)));
+      class_symtab->free_ptr = (char *) bl;
+      BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK) = bl;
+    }
+  
+  BLOCK_SYM (bl, BLOCK_NSYMS (bl)) = sym;
+  BLOCK_NSYMS (bl) = BLOCK_NSYMS (bl) + 1;
+}
+
+static struct symbol * add_class_symbol PARAMS ((struct type *type, CORE_ADDR addr));
+
+static struct symbol *
+add_class_symbol (type, addr)
+     struct type *type;
+     CORE_ADDR addr;
+{
+  struct symbol *sym;
+  sym = (struct symbol *)
+    obstack_alloc (&dynamics_objfile->symbol_obstack, sizeof (struct symbol));
+  memset (sym, 0, sizeof (struct symbol));
+  SYMBOL_LANGUAGE (sym) = language_java;
+  SYMBOL_NAME (sym) = TYPE_TAG_NAME (type);
+  SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+  /*  SYMBOL_VALUE (sym) = valu;*/
+  SYMBOL_TYPE (sym) = type;
+  SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+  SYMBOL_VALUE_ADDRESS (sym) = addr;
+  return sym;
+}
+#endif
+
+struct type *
+java_lookup_class (name)
+     char *name;
+{
+  struct symbol *sym;
+  sym = lookup_symbol (name, expression_context_block, STRUCT_NAMESPACE,
+		       (int *) 0, (struct symtab **) NULL);
+  if (sym != NULL)
+    return SYMBOL_TYPE (sym);
+#if 0
+  CORE_ADDR addr;
+  if (called from parser)
+    {
+      call lookup_class (or similar) in inferior;
+      if not found:
+	return NULL;
+      addr = found in inferior;
+    }
+  else
+    addr = 0;
+  struct type *type;
+  type = alloc_type (objfile);
+  TYPE_CODE (type) = TYPE_CODE_STRUCT;
+  INIT_CPLUS_SPECIFIC (type);
+  TYPE_TAG_NAME (type) = obsavestring (name, strlen(name), &objfile->type_obstack);
+  TYPE_FLAGS (type) |= TYPE_FLAG_STUB;
+  TYPE ? = addr;
+  return type;
+#else
+  /* FIXME - should search inferior's symbol table. */
+  return NULL;
+#endif
+}
+
+/* Return a nul-terminated string (allocated on OBSTACK) for
+   a name given by NAME (which has type Utf8Const*). */
+
+char *
+get_java_utf8_name (obstack, name)
+     struct obstack *obstack;
+     value_ptr name;
+{
+  char *chrs;
+  value_ptr temp = name;
+  int name_length;
+  CORE_ADDR data_addr;
+  temp = value_struct_elt (&temp, NULL, "length", NULL, "structure");
+  name_length = (int) value_as_long (temp);
+  data_addr = VALUE_ADDRESS (temp) + VALUE_OFFSET (temp)
+    + TYPE_LENGTH (VALUE_TYPE (temp));
+  chrs = obstack_alloc (obstack, name_length+1);
+  chrs [name_length] = '\0';
+  read_memory_section (data_addr, chrs, name_length, NULL);
+  return chrs;
+}
+
+value_ptr
+java_class_from_object (obj_val)
+     value_ptr obj_val;
+{
+  /* This is all rather inefficient, since the offsets of vtable and
+     class are fixed.  FIXME */
+  value_ptr vtable_val;
+
+  if (TYPE_CODE (VALUE_TYPE (obj_val)) == TYPE_CODE_PTR
+      && TYPE_LENGTH (TYPE_TARGET_TYPE (VALUE_TYPE (obj_val))) == 0)
+    obj_val = value_at (get_java_object_type (),
+			value_as_pointer (obj_val), NULL);
+
+  vtable_val = value_struct_elt (&obj_val, NULL, "vtable", NULL, "structure");
+  return value_struct_elt (&vtable_val, NULL, "class", NULL, "structure");
+}
+
+/* Check if CLASS_IS_PRIMITIVE(value of clas): */
+int
+java_class_is_primitive (clas)
+     value_ptr clas;
+{
+  value_ptr vtable = value_struct_elt (&clas, NULL, "vtable", NULL, "struct");
+  CORE_ADDR i = value_as_pointer (vtable);
+  return (int) (i & 0x7fffffff) == (int) 0x7fffffff;
+}
+
+/* Read a GCJ Class object, and generated a gdb (TYPE_CODE_STRUCT) type. */
+
+struct type *
+type_from_class (clas)
+     value_ptr clas;
+{
+  struct type *type;
+  char *name;
+  value_ptr temp;
+  struct objfile *objfile;
+  value_ptr utf8_name;
+  char *nptr;
+  CORE_ADDR addr;
+  struct block *bl;
+  int i;
+  int is_array = 0;
+
+  type = check_typedef (VALUE_TYPE (clas));
+  if (TYPE_CODE (type) == TYPE_CODE_PTR)
+    {
+      if (value_logical_not (clas))
+	return NULL;
+      clas = value_ind (clas);
+    }
+  addr = VALUE_ADDRESS (clas) + VALUE_OFFSET (clas);
+
+#if 0
+  get_java_class_symtab ();
+  bl = BLOCKVECTOR_BLOCK (BLOCKVECTOR (class_symtab), GLOBAL_BLOCK);
+  for (i = BLOCK_NSYMS (bl);  --i >= 0; )
+    {
+      struct symbol *sym = BLOCK_SYM (bl, i);
+      if (SYMBOL_VALUE_ADDRESS (sym) == addr)
+	return SYMBOL_TYPE (sym);
+    }
+#endif
+
+  objfile = get_dynamics_objfile();
+  if (java_class_is_primitive (clas))
+    {
+      value_ptr sig;
+      temp = clas;
+      sig = value_struct_elt (&temp, NULL, "method_count", NULL, "structure");
+      return java_primitive_type (value_as_long (sig));
+    }
+
+  /* Get Class name. */
+  /* if clasloader non-null, prepend loader address. FIXME */
+  temp = clas;
+  utf8_name = value_struct_elt (&temp, NULL, "name", NULL, "structure");
+  name = get_java_utf8_name (&objfile->type_obstack, utf8_name);
+  for (nptr = name;  *nptr != 0;  nptr++)
+    {
+      if (*nptr == '/')
+	*nptr = '.';
+    }
+
+  type = java_lookup_class (name);
+  if (type != NULL)
+    return type;
+
+  type = alloc_type (objfile);
+  TYPE_CODE (type) = TYPE_CODE_STRUCT;
+  INIT_CPLUS_SPECIFIC (type);
+
+  if (name[0] == '[')
+    {
+      char *signature = name;
+      int namelen = java_demangled_signature_length (signature);
+      if (namelen > strlen (name))
+	name = obstack_alloc (&objfile->type_obstack, namelen+1);
+      java_demangled_signature_copy (name, signature);
+      name[namelen] = '\0';
+      is_array = 1;
+      temp = clas;
+      /* Set array element type. */
+      temp = value_struct_elt (&temp, NULL, "methods", NULL, "structure");
+      VALUE_TYPE (temp) = lookup_pointer_type (VALUE_TYPE (clas));
+      TYPE_TARGET_TYPE (type) = type_from_class (temp);
+    }
+
+  ALLOCATE_CPLUS_STRUCT_TYPE (type);
+  TYPE_TAG_NAME (type) = name;
+
+  add_class_symtab_symbol (add_class_symbol (type, addr));
+  return java_link_class_type (type, clas);
+}
+
+/* Fill in class TYPE with data from the CLAS value. */ 
+
+struct type *
+java_link_class_type (type, clas)
+     struct type *type;
+     value_ptr clas;
+{
+  value_ptr temp;
+  char *unqualified_name;
+  char *name = TYPE_TAG_NAME (type);
+  int ninterfaces, nfields, nmethods;
+  int type_is_object = 0;
+  struct fn_field *fn_fields;
+  struct fn_fieldlist *fn_fieldlists;
+  value_ptr fields, field, method, methods;
+  int i, j;
+  struct objfile *objfile = get_dynamics_objfile();
+  struct type *tsuper;
+
+  unqualified_name = strrchr (name, '.');
+  if (unqualified_name == NULL)
+    unqualified_name = name;
+
+  temp = clas;
+  temp = value_struct_elt (&temp, NULL, "superclass", NULL, "structure");
+  if (name != NULL && strcmp (name, "java.lang.Object") == 0)
+    {
+      tsuper = get_java_object_type ();
+      if (tsuper && TYPE_CODE (tsuper) == TYPE_CODE_PTR)
+	tsuper = TYPE_TARGET_TYPE (tsuper);
+      type_is_object = 1;
+    }
+  else
+    tsuper = type_from_class (temp);
+
+#if 1
+  ninterfaces = 0;
+#else
+  temp = clas;
+  ninterfaces = value_as_long (value_struct_elt (&temp, NULL, "interface_len", NULL, "structure"));
+#endif
+  TYPE_N_BASECLASSES (type) = (tsuper == NULL ? 0 : 1) + ninterfaces;
+  temp = clas;
+  nfields = value_as_long (value_struct_elt (&temp, NULL, "field_count", NULL, "structure"));
+  nfields += TYPE_N_BASECLASSES (type);
+  nfields++;  /* Add one for dummy "class" field. */
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nfields);
+
+  memset (TYPE_FIELDS (type), 0, sizeof (struct field) * nfields);
+
+  TYPE_FIELD_PRIVATE_BITS (type) =
+    (B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+  B_CLRALL (TYPE_FIELD_PRIVATE_BITS (type), nfields);
+
+  TYPE_FIELD_PROTECTED_BITS (type) =
+    (B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+  B_CLRALL (TYPE_FIELD_PROTECTED_BITS (type), nfields);
+
+  TYPE_FIELD_IGNORE_BITS (type) =
+    (B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+  B_CLRALL (TYPE_FIELD_IGNORE_BITS (type), nfields);
+
+  TYPE_FIELD_VIRTUAL_BITS (type) = (B_TYPE *)
+    TYPE_ALLOC (type, B_BYTES (TYPE_N_BASECLASSES (type)));
+  B_CLRALL (TYPE_FIELD_VIRTUAL_BITS (type), TYPE_N_BASECLASSES (type));
+
+  if (tsuper != NULL)
+    {
+      TYPE_BASECLASS (type, 0) = tsuper;
+      if (type_is_object)
+	SET_TYPE_FIELD_PRIVATE (type, 0);
+    }
+
+  i = strlen (name);
+  if (i > 2 && name[i-1] == ']' && tsuper != NULL)
+    {
+      /* FIXME */
+      TYPE_LENGTH (type) = TYPE_LENGTH (tsuper) + 4;  /* size with "length" */
+    }
+  else
+    {
+      temp = clas;
+      temp = value_struct_elt (&temp, NULL, "size_in_bytes", NULL, "structure");
+      TYPE_LENGTH (type) = value_as_long (temp);
+    }
+
+  fields = NULL;
+  nfields--;  /* First set up dummy "class" field. */
+  SET_FIELD_PHYSADDR (TYPE_FIELD (type, nfields),
+		      VALUE_ADDRESS (clas) + VALUE_OFFSET (clas));
+  TYPE_FIELD_NAME (type, nfields) = "class";
+  TYPE_FIELD_TYPE (type, nfields) = VALUE_TYPE (clas);
+  SET_TYPE_FIELD_PRIVATE (type, nfields);
+  
+  for (i = TYPE_N_BASECLASSES (type);  i < nfields;  i++)
+    {
+      int accflags;
+      int boffset;
+      if (fields == NULL)
+	{
+	  temp = clas;
+	  fields = value_struct_elt (&temp, NULL, "fields", NULL, "structure");
+	  field = value_ind (fields);
+	}
+      else
+	{ /* Re-use field value for next field. */
+	  VALUE_ADDRESS (field) += TYPE_LENGTH (VALUE_TYPE (field));
+	  VALUE_LAZY (field) = 1;
+	}
+      temp = field;
+      temp = value_struct_elt (&temp, NULL, "name", NULL, "structure");
+      TYPE_FIELD_NAME (type, i) =
+	get_java_utf8_name (&objfile->type_obstack, temp);
+      temp = field;
+      accflags = value_as_long (value_struct_elt (&temp, NULL, "accflags",
+						  NULL, "structure"));
+      temp = field;
+      temp = value_struct_elt (&temp, NULL, "info", NULL, "structure");
+      boffset = value_as_long (value_struct_elt (&temp, NULL, "boffset",
+						  NULL, "structure"));
+      if (accflags & 0x0001) /* public access */
+	{
+	  /* ??? */
+	}
+      if (accflags & 0x0002) /* private access */
+	{
+	  SET_TYPE_FIELD_PRIVATE (type, i);
+	}
+      if (accflags & 0x0004) /* protected access */
+	{
+	  SET_TYPE_FIELD_PROTECTED (type, i);
+	}
+      if (accflags & 0x0008)  /* ACC_STATIC */
+	SET_FIELD_PHYSADDR(TYPE_FIELD(type, i), boffset);
+      else
+	TYPE_FIELD_BITPOS (type, i) = 8 * boffset;
+      if (accflags & 0x8000) /* FIELD_UNRESOLVED_FLAG */
+	{
+	  TYPE_FIELD_TYPE (type, i) = get_java_object_type (); /* FIXME */
+	}
+      else
+	{
+	  struct type *ftype;
+	  temp = field;
+	  temp = value_struct_elt (&temp, NULL, "type", NULL, "structure");
+	  ftype = type_from_class (temp);
+	  if (TYPE_CODE (ftype) == TYPE_CODE_STRUCT)
+	    ftype = lookup_pointer_type (ftype);
+	  TYPE_FIELD_TYPE (type, i) = ftype;
+	}
+    }
+
+  temp = clas;
+  nmethods = value_as_long (value_struct_elt (&temp, NULL, "method_count",
+					      NULL, "structure"));
+  TYPE_NFN_FIELDS_TOTAL (type) = nmethods;
+  j = nmethods * sizeof (struct fn_field);
+  fn_fields = (struct fn_field*)
+    obstack_alloc (&dynamics_objfile->symbol_obstack, j);
+  memset (fn_fields, 0, j);
+  fn_fieldlists = (struct fn_fieldlist*)
+    alloca (nmethods * sizeof (struct fn_fieldlist));
+
+  methods = NULL;
+  for (i = 0;  i < nmethods;  i++)
+    {
+      char *mname;
+      int k;
+      if (methods == NULL)
+	{
+	  temp = clas;
+	  methods = value_struct_elt (&temp, NULL, "methods", NULL, "structure");
+	  method = value_ind (methods);
+	}
+      else
+	{ /* Re-use method value for next method. */
+	  VALUE_ADDRESS (method) += TYPE_LENGTH (VALUE_TYPE (method));
+	  VALUE_LAZY (method) = 1;
+	}
+
+      /* Get method name. */
+      temp = method;
+      temp = value_struct_elt (&temp, NULL, "name", NULL, "structure");
+      mname = get_java_utf8_name (&objfile->type_obstack, temp);
+      if (strcmp (mname, "<init>") == 0)
+	mname = unqualified_name;
+
+      /* Check for an existing method with the same name.
+       * This makes building the fn_fieldslists an O(nmethods**2)
+       * operation.  That could be using hashing, but I doubt it
+       * is worth it.  Note that we do maintain the order of methods
+       * in the inferior's Method table (as long as that is grouped
+       * by method name), which I think is desirable.  --PB */
+      for (k = 0, j = TYPE_NFN_FIELDS (type);  ; )
+	{
+	  if (--j < 0)
+	    { /* No match - new method name. */
+	      j = TYPE_NFN_FIELDS(type)++;
+	      fn_fieldlists[j].name = mname;
+	      fn_fieldlists[j].length = 1;
+	      fn_fieldlists[j].fn_fields = &fn_fields[i];
+	      k = i;
+	      break;
+	    }
+	  if (strcmp (mname, fn_fieldlists[j].name) == 0)
+	    { /* Found an existing method with the same name. */
+	      int l;
+	      if (mname != unqualified_name)
+		obstack_free (&objfile->type_obstack, mname);
+	      mname = fn_fieldlists[j].name;
+	      fn_fieldlists[j].length++;
+	      k = i - k;  /* Index of new slot. */
+	      /* Shift intervening fn_fields (between k and i) down. */
+	      for (l = i;  l > k;  l--) fn_fields[l] = fn_fields[l-1];
+	      for (l = TYPE_NFN_FIELDS (type);  --l > j; )
+		fn_fieldlists[l].fn_fields++;
+	      break;
+	    }
+	  k += fn_fieldlists[j].length;
+	}
+      fn_fields[k].physname = "";
+      fn_fields[k].is_stub = 1;
+      fn_fields[k].type = make_function_type (java_void_type, NULL); /* FIXME*/
+      TYPE_CODE (fn_fields[k].type) = TYPE_CODE_METHOD;
+    }
+
+  j = TYPE_NFN_FIELDS(type) * sizeof (struct fn_fieldlist);
+  TYPE_FN_FIELDLISTS (type) = (struct fn_fieldlist*)
+    obstack_alloc (&dynamics_objfile->symbol_obstack, j);
+  memcpy (TYPE_FN_FIELDLISTS (type), fn_fieldlists, j);
+ 
+  return type;
+}
+
+static struct type *java_object_type;
+
+struct type *
+get_java_object_type ()
+{
+  if (java_object_type == NULL)
+    {
+      struct symbol *sym;
+      sym = lookup_symbol ("java.lang.Object", NULL, STRUCT_NAMESPACE,
+			   (int *) 0, (struct symtab **) NULL);
+      if (sym == NULL)
+	error ("cannot find java.lang.Object");
+      java_object_type = SYMBOL_TYPE (sym);
+    }
+  return java_object_type;
+}
+
+int
+get_java_object_header_size ()
+{
+  struct type *objtype = get_java_object_type ();
+  if (objtype == NULL)
+    return (2 * TARGET_PTR_BIT / TARGET_CHAR_BIT);
+  else
+    return TYPE_LENGTH (objtype);
+}
+
+int
+is_object_type (type)
+     struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  if (TYPE_CODE (type) == TYPE_CODE_PTR)
+    {
+      struct type *ttype = check_typedef (TYPE_TARGET_TYPE (type));
+      char *name;
+      if (TYPE_CODE (ttype) != TYPE_CODE_STRUCT)
+	return 0;
+      while (TYPE_N_BASECLASSES (ttype) > 0)
+	ttype = TYPE_BASECLASS (ttype, 0);
+      name = TYPE_TAG_NAME (ttype);
+      if (name != NULL && strcmp (name, "java.lang.Object") == 0)
+	return 1;
+      name = TYPE_NFIELDS (ttype) > 0 ? TYPE_FIELD_NAME (ttype, 0) : (char*)0;
+      if (name != NULL && strcmp (name, "vtable") == 0)
+	{
+	  if (java_object_type == NULL)
+	    java_object_type = type;
+	  return 1;
+	}
+    }
+  return 0;
+}
+
+struct type *
+java_primitive_type (signature)
+     int signature;
+{
+  switch (signature)
+    {
+    case 'B':  return java_byte_type;
+    case 'S':  return java_short_type;
+    case 'I':  return java_int_type;
+    case 'J':  return java_long_type;
+    case 'Z':  return java_boolean_type;
+    case 'C':  return java_char_type;
+    case 'F':  return java_float_type;
+    case 'D':  return java_double_type;
+    case 'V':  return java_void_type;
+    }
+  error ("unknown signature '%c' for primitive type", (char) signature);
+}
+
+/* If name[0 .. namelen-1] is the name of a primitive Java type,
+   return that type.  Otherwise, return NULL. */
+
+struct type *
+java_primitive_type_from_name (name, namelen)
+     char* name;
+     int namelen;
+{
+  switch (name[0])
+    {
+    case 'b':
+      if (namelen == 4 && memcmp (name, "byte", 4) == 0)
+	return java_byte_type;
+      if (namelen == 7 && memcmp (name, "boolean", 7) == 0)
+	return java_boolean_type;
+      break;
+    case 'c':
+      if (namelen == 4 && memcmp (name, "char", 4) == 0)
+	return java_char_type;
+    case 'd':
+      if (namelen == 6 && memcmp (name, "double", 6) == 0)
+	return java_double_type;
+      break;
+    case 'f':
+      if (namelen == 5 && memcmp (name, "float", 5) == 0)
+	return java_float_type;
+      break;
+    case 'i':
+      if (namelen == 3 && memcmp (name, "int", 3) == 0)
+	return java_int_type;
+      break;
+    case 'l':
+      if (namelen == 4 && memcmp (name, "long", 4) == 0)
+	return java_long_type;
+      break;
+    case 's':
+      if (namelen == 5 && memcmp (name, "short", 5) == 0)
+	return java_short_type;
+      break;
+    case 'v':
+      if (namelen == 4 && memcmp (name, "void", 4) == 0)
+	return java_void_type;
+      break;
+    }
+  return NULL;
+}
+
+/* Return the length (in bytes) of demangled name of the Java type
+   signature string SIGNATURE. */
+
+static int
+java_demangled_signature_length (signature)
+     char *signature;
+{
+  int array = 0;
+  for (; *signature == '[';  signature++)
+    array += 2;  /* Two chars for "[]". */
+  switch (signature[0])
+    {
+    case 'L':
+      /* Subtract 2 for 'L' and ';'. */
+      return strlen (signature) - 2 + array;
+    default:
+      return strlen (TYPE_NAME (java_primitive_type (signature[0]))) + array;
+    }
+}
+
+/* Demangle the Java type signature SIGNATURE, leaving the result in RESULT. */
+
+static void
+java_demangled_signature_copy (result, signature)
+     char *result;
+     char *signature;
+{
+  int array = 0;
+  char *ptr;
+  int i;
+  while (*signature == '[')
+    {
+      array++;
+      signature++;
+    }
+  switch (signature[0])
+    {
+    case 'L':
+      /* Subtract 2 for 'L' and ';', but add 1 for final nul. */
+      signature++;
+      ptr = result;
+      for ( ; *signature != ';' && *signature != '\0'; signature++)
+	{
+	  if (*signature == '/')
+	    *ptr++ = '.';
+	  else
+	    *ptr++ = *signature;
+	}
+      break;
+    default:
+      ptr = TYPE_NAME (java_primitive_type (signature[0]));
+      i = strlen (ptr);
+      strcpy (result, ptr);
+      ptr = result + i;
+      break;
+    }
+  while (--array >= 0)
+    {
+      *ptr++ = '[';
+      *ptr++ = ']';
+    }
+}
+
+/* Return the demangled name of the Java type signature string SIGNATURE,
+   as a freshly allocated copy. */
+
+char *
+java_demangle_type_signature (signature)
+     char *signature;
+{
+  int length = java_demangled_signature_length (signature);
+  char *result = xmalloc (length + 1);
+  java_demangled_signature_copy (result, signature);
+  result[length] = '\0';
+  return result;
+}
+
+struct type *
+java_lookup_type (signature)
+     char *signature;
+{
+  switch (signature[0])
+    {
+    case 'L':
+    case '[':
+      error ("java_lookup_type not fully implemented");
+    default:
+      return java_primitive_type (signature[0]);
+    }
+}
+
+/* Return the type of TYPE followed by DIMS pairs of [ ].
+   If DIMS == 0, TYPE is returned. */
+
+struct type *
+java_array_type (type, dims)
+     struct type *type;
+     int dims;
+{
+  struct type *range_type;
+
+  while (dims-- > 0)
+    {
+      range_type = create_range_type (NULL, builtin_type_int, 0, 0);
+      /* FIXME  This is bogus!  Java arrays are not gdb arrays! */
+      type = create_array_type (NULL, type, range_type);
+    }
+
+  return type;
+}
+
+/* Create a Java string in the inferior from a (Utf8) literal. */
+
+value_ptr
+java_value_string (ptr, len)
+     char *ptr;
+     int len;
+{
+  error ("not implemented - java_value_string"); /* FIXME */
+}
+
+/* Print the character C on STREAM as part of the contents of a literal
+   string whose delimiter is QUOTER.  Note that that format for printing
+   characters and strings is language specific. */
+
+static void
+java_emit_char (c, stream, quoter)
+     int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+  switch (c)
+    {
+    case '\\':
+    case '\'':
+      fprintf_filtered (stream, "\\%c", c);
+      break;
+    case '\b':
+      fputs_filtered ("\\b", stream);
+      break;
+    case '\t':
+      fputs_filtered ("\\t", stream);
+      break;
+    case '\n':
+      fputs_filtered ("\\n", stream);
+      break;
+    case '\f':
+      fputs_filtered ("\\f", stream);
+      break;
+    case '\r':
+      fputs_filtered ("\\r", stream);
+      break;
+    default:
+      if (isprint (c))
+	fputc_filtered (c, stream);
+      else
+	fprintf_filtered (stream, "\\u%.4x", (unsigned int) c);
+      break;
+    }
+}
+
+static value_ptr
+evaluate_subexp_java (expect_type, exp, pos, noside)
+     struct type *expect_type;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  int pc = *pos;
+  int i;
+  char *name;
+  enum exp_opcode op = exp->elts[*pos].opcode;
+  value_ptr arg1, arg2;
+  struct type *type;
+  switch (op)
+    {
+    case UNOP_IND:
+      if (noside == EVAL_SKIP)
+	goto standard;
+      (*pos)++;
+      arg1 = evaluate_subexp_java (NULL_TYPE, exp, pos, EVAL_NORMAL);
+      if (is_object_type (VALUE_TYPE (arg1)))
+	{
+	  struct type *type;
+
+	  type = type_from_class (java_class_from_object (arg1));
+	  arg1 = value_cast (lookup_pointer_type (type), arg1);
+	}
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return value_ind (arg1);
+
+    case BINOP_SUBSCRIPT:
+      (*pos)++;
+      arg1 = evaluate_subexp_with_coercion (exp, pos, noside);
+      arg2 = evaluate_subexp_with_coercion (exp, pos, noside);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      /* If the user attempts to subscript something that is not an
+	 array or pointer type (like a plain int variable for example),
+	 then report this as an error. */
+      
+      COERCE_REF (arg1);
+      type = check_typedef (VALUE_TYPE (arg1));
+      if (TYPE_CODE (type) == TYPE_CODE_PTR)
+	type = check_typedef (TYPE_TARGET_TYPE (type));
+      name = TYPE_NAME (type);
+      if (name == NULL)
+	name = TYPE_TAG_NAME (type);
+      i = name == NULL ? 0 : strlen (name);
+      if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+	  && i > 2 && name [i - 1] == ']')
+	{
+	  CORE_ADDR address;
+	  long length, index;
+	  struct type *el_type;
+	  char buf4[4];
+
+	  value_ptr clas = java_class_from_object(arg1);
+	  value_ptr temp = clas;
+	  /* Get CLASS_ELEMENT_TYPE of the array type. */
+	  temp = value_struct_elt (&temp, NULL, "methods",
+				   NULL, "structure"); 
+	  VALUE_TYPE (temp) = VALUE_TYPE (clas);
+	  el_type = type_from_class (temp);
+	  if (TYPE_CODE (el_type) == TYPE_CODE_STRUCT)
+	    el_type = lookup_pointer_type (el_type);
+
+	  if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	    return value_zero (el_type, VALUE_LVAL (arg1));
+	  address = value_as_pointer (arg1);
+	  address += JAVA_OBJECT_SIZE;
+	  read_memory (address, buf4, 4);
+	  length = (long) extract_signed_integer (buf4, 4);
+	  index = (long) value_as_long (arg2);
+	  if (index >= length || index < 0)
+	    error ("array index (%ld) out of bounds (length: %ld)",
+		   index, length);
+	  address = (address + 4) + index * TYPE_LENGTH (el_type);
+	  return value_at (el_type, address, NULL);
+	}
+      else if (TYPE_CODE (type) == TYPE_CODE_ARRAY)
+	{
+	  if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	    return value_zero (TYPE_TARGET_TYPE (type), VALUE_LVAL (arg1));
+	  else
+	    return value_subscript (arg1, arg2);
+	}
+      if (name)
+	error ("cannot subscript something of type `%s'", name);
+      else
+	error ("cannot subscript requested type");
+
+    case OP_STRING:
+      (*pos)++;
+      i = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (i + 1);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      return java_value_string (&exp->elts[pc + 2].string, i);
+
+    case STRUCTOP_STRUCT:
+      arg1 = evaluate_subexp_standard (expect_type, exp, pos, noside);
+      /* Convert object field (such as TYPE.class) to reference. */
+      if (TYPE_CODE (VALUE_TYPE (arg1)) == TYPE_CODE_STRUCT)
+	arg1 = value_addr (arg1);
+      return arg1;
+    default:
+      break;
+    }
+standard:
+  return evaluate_subexp_standard (expect_type, exp, pos, noside);
+ nosideret:
+  return value_from_longest (builtin_type_long, (LONGEST) 1);
+}
+
+static struct type *
+java_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  switch (typeid)
+    {
+    case FT_VOID:           return java_void_type;
+    case FT_BOOLEAN:        return java_boolean_type;
+    case FT_CHAR:           return java_char_type;
+    case FT_FLOAT:          return java_float_type;
+    case FT_DBL_PREC_FLOAT: return java_double_type;
+    case FT_BYTE: case FT_SIGNED_CHAR:       return java_byte_type;
+    case FT_SHORT: case FT_SIGNED_SHORT:     return java_short_type;
+    case FT_INTEGER: case FT_SIGNED_INTEGER: return java_int_type;
+    case FT_LONG: case FT_SIGNED_LONG:       return java_long_type;
+    }
+  return c_create_fundamental_type (objfile, typeid);
+}
+
+/* Table mapping opcodes into strings for printing operators
+   and precedences of the operators.  */
+
+const struct op_print java_op_print_tab[] =
+  {
+    {",",  BINOP_COMMA, PREC_COMMA, 0},
+    {"=",  BINOP_ASSIGN, PREC_ASSIGN, 1},
+    {"||", BINOP_LOGICAL_OR, PREC_LOGICAL_OR, 0},
+    {"&&", BINOP_LOGICAL_AND, PREC_LOGICAL_AND, 0},
+    {"|",  BINOP_BITWISE_IOR, PREC_BITWISE_IOR, 0},
+    {"^",  BINOP_BITWISE_XOR, PREC_BITWISE_XOR, 0},
+    {"&",  BINOP_BITWISE_AND, PREC_BITWISE_AND, 0},
+    {"==", BINOP_EQUAL, PREC_EQUAL, 0},
+    {"!=", BINOP_NOTEQUAL, PREC_EQUAL, 0},
+    {"<=", BINOP_LEQ, PREC_ORDER, 0},
+    {">=", BINOP_GEQ, PREC_ORDER, 0},
+    {">",  BINOP_GTR, PREC_ORDER, 0},
+    {"<",  BINOP_LESS, PREC_ORDER, 0},
+    {">>", BINOP_RSH, PREC_SHIFT, 0},
+    {"<<", BINOP_LSH, PREC_SHIFT, 0},
+#if 0
+    {">>>", BINOP_???, PREC_SHIFT, 0},
+#endif
+    {"+",  BINOP_ADD, PREC_ADD, 0},
+    {"-",  BINOP_SUB, PREC_ADD, 0},
+    {"*",  BINOP_MUL, PREC_MUL, 0},
+    {"/",  BINOP_DIV, PREC_MUL, 0},
+    {"%",  BINOP_REM, PREC_MUL, 0},
+    {"-",  UNOP_NEG, PREC_PREFIX, 0},
+    {"!",  UNOP_LOGICAL_NOT, PREC_PREFIX, 0},
+    {"~",  UNOP_COMPLEMENT, PREC_PREFIX, 0},
+    {"*",  UNOP_IND, PREC_PREFIX, 0},
+#if 0
+    {"instanceof", ???, ???, 0},
+#endif
+    {"++", UNOP_PREINCREMENT, PREC_PREFIX, 0},
+    {"--", UNOP_PREDECREMENT, PREC_PREFIX, 0},
+    {NULL, 0, 0, 0}
+};
+
+const struct language_defn java_language_defn = {
+  "java",				/* Language name */
+  language_java,
+  c_builtin_types,
+  range_check_off,
+  type_check_off,
+  java_parse,
+  java_error,
+  evaluate_subexp_java,
+  c_printchar,			/* Print a character constant */
+  c_printstr,			/* Function to print string constant */
+  java_emit_char,		/* Function to print a single character */
+  java_create_fundamental_type,	/* Create fundamental type in this language */
+  java_print_type,		/* Print a type using appropriate syntax */
+  java_val_print,		/* Print a value using appropriate syntax */
+  java_value_print,		/* Print a top-level value */
+  {"",      "",    "",   ""},	/* Binary format info */
+  {"0%lo",   "0",   "o",  ""},	/* Octal format info */
+  {"%ld",    "",    "d",  ""},	/* Decimal format info */
+  {"0x%lx",  "0x",  "x",  ""},	/* Hex format info */
+  java_op_print_tab,		/* expression operators for printing */
+  0,				/* not c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+void
+_initialize_java_language ()
+{
+
+  java_int_type    = init_type (TYPE_CODE_INT,  4, 0, "int", NULL);
+  java_short_type  = init_type (TYPE_CODE_INT,  2, 0, "short", NULL);
+  java_long_type   = init_type (TYPE_CODE_INT,  8, 0, "long", NULL);
+  java_byte_type   = init_type (TYPE_CODE_INT,  1, 0, "byte", NULL);
+  java_boolean_type= init_type (TYPE_CODE_BOOL, 1, 0, "boolean", NULL);
+  java_char_type   = init_type (TYPE_CODE_CHAR, 2, TYPE_FLAG_UNSIGNED, "char", NULL);
+  java_float_type  = init_type (TYPE_CODE_FLT,  4, 0, "float", NULL);
+  java_double_type = init_type (TYPE_CODE_FLT,  8, 0, "double", NULL);
+  java_void_type   = init_type (TYPE_CODE_VOID, 1, 0, "void", NULL);
+
+  add_language (&java_language_defn);
+}
+
+/* Cleanup code that should be run on every "run".
+   We should use make_run_cleanup to have this be called.
+   But will that mess up values in value histry?  FIXME */
+
+void java_rerun_cleanup ()
+{
+  if (class_symtab != NULL)
+    {
+      free_symtab (class_symtab); /* ??? */
+      class_symtab = NULL;
+    }
+  if (dynamics_objfile != NULL)
+    {
+      free_objfile (dynamics_objfile);
+      dynamics_objfile = NULL;
+    }
+
+  java_object_type = NULL;
+}
diff --git a/gdb/jv-lang.h b/gdb/jv-lang.h
new file mode 100644
index 0000000..44c4437
--- /dev/null
+++ b/gdb/jv-lang.h
@@ -0,0 +1,67 @@
+/* Java language support definitions for GDB, the GNU debugger.
+   Copyright 1997, 1998, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+extern int
+java_parse PARAMS ((void));	/* Defined in jv-exp.y */
+
+extern void
+java_error PARAMS ((char *));	/* Defined in jv-exp.y */
+
+/* sizeof (struct Object) */
+#define JAVA_OBJECT_SIZE (get_java_object_header_size ())
+
+extern struct type *java_int_type;
+extern struct type *java_byte_type;
+extern struct type *java_short_type;
+extern struct type *java_long_type;
+extern struct type *java_boolean_type;
+extern struct type *java_char_type;
+extern struct type *java_float_type;
+extern struct type *java_double_type;
+extern struct type *java_void_type;
+
+extern int
+java_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *, int, int,
+			int, enum val_prettyprint));
+
+extern int
+java_value_print PARAMS ((struct value *, GDB_FILE *, int,
+			  enum val_prettyprint));
+
+extern value_ptr java_class_from_object PARAMS ((value_ptr));
+
+extern struct type *type_from_class PARAMS ((struct value *));
+
+extern struct type *java_primitive_type PARAMS ((int signature));
+
+extern struct type *java_primitive_type_from_name PARAMS ((char*, int));
+
+extern struct type *java_array_type PARAMS ((struct type *, int));
+
+extern struct type *get_java_object_type PARAMS ((void));
+extern int get_java_object_header_size PARAMS ((void));
+
+extern struct type *java_lookup_class PARAMS((char *));
+
+extern int is_object_type PARAMS ((struct type*));
+
+extern void			/* Defined in jv-typeprint.c */
+java_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+extern char *java_demangle_type_signature PARAMS ((char *));
diff --git a/gdb/jv-typeprint.c b/gdb/jv-typeprint.c
new file mode 100644
index 0000000..59539a0
--- /dev/null
+++ b/gdb/jv-typeprint.c
@@ -0,0 +1,339 @@
+/* Support for printing Java types for GDB, the GNU debugger.
+   Copyright 1997, 1998, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "demangle.h"
+#include "jv-lang.h"
+#include "gdb_string.h"
+#include "typeprint.h"
+
+static void
+java_type_print_derivation_info (stream, type)
+     GDB_FILE *stream;
+     struct type *type;
+{
+  char *name;
+  int i;
+  int n_bases;
+  int prev;
+
+  n_bases = TYPE_N_BASECLASSES (type);
+
+  for (i = 0, prev = 0; i < n_bases; i++)
+    {
+      int kind;
+
+      kind = BASETYPE_VIA_VIRTUAL(type, i) ? 'I' : 'E';
+
+      fputs_filtered (kind == prev ? ", "
+		      : kind == 'I' ? " implements "
+		      : " extends ",
+		      stream);
+      prev = kind;
+      name = type_name_no_tag (TYPE_BASECLASS (type, i));
+
+      fprintf_filtered (stream, "%s", name ? name : "(null)");
+    }
+
+  if (i > 0)
+    fputs_filtered (" ", stream);
+}
+
+/* Print the name of the type (or the ultimate pointer target,
+   function value or array element), or the description of a
+   structure or union.
+
+   SHOW positive means print details about the type (e.g. enum values),
+   and print structure elements passing SHOW - 1 for show.
+   SHOW negative means just print the type name or struct tag if there is one.
+   If there is no name, print something sensible but concise like
+   "struct {...}".
+   SHOW zero means just print the type name or struct tag if there is one.
+   If there is no name, print something sensible but not as concise like
+   "struct {int x; int y;}".
+
+   LEVEL is the number of spaces to indent by.
+   We increase it for some recursive calls.  */
+
+void
+java_type_print_base (type, stream, show, level)
+     struct type *type;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  register int i;
+  register int len;
+  char *mangled_name;
+  char *demangled_name;
+  QUIT;
+
+  wrap_here ("    ");
+
+  if (type == NULL)
+    {
+      fputs_filtered ("<type unknown>", stream);
+      return;
+    }
+
+  /* When SHOW is zero or less, and there is a valid type name, then always
+     just print the type name directly from the type.  */
+
+  if (show <= 0
+      && TYPE_NAME (type) != NULL)
+    {
+      fputs_filtered (TYPE_NAME (type), stream);
+      return;
+    }
+
+  CHECK_TYPEDEF (type);
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_PTR:
+      java_type_print_base (TYPE_TARGET_TYPE (type), stream, show, level);
+      break;
+
+    case TYPE_CODE_STRUCT:
+      if (TYPE_TAG_NAME (type) != NULL && TYPE_TAG_NAME (type)[0] == '[')
+	{			/* array type */
+	  char *name = java_demangle_type_signature (TYPE_TAG_NAME (type));
+	  fputs_filtered (name, stream);
+	  free (name);
+	  break;
+	}
+
+      if (show >= 0)
+	fprintf_filtered (stream, "class ");
+
+      if (TYPE_TAG_NAME (type) != NULL)
+	{
+	  fputs_filtered (TYPE_TAG_NAME (type), stream);
+	  if (show > 0)
+	    fputs_filtered (" ", stream);
+	}
+
+      wrap_here ("    ");
+
+      if (show < 0)
+	{
+	  /* If we just printed a tag name, no need to print anything else.  */
+	  if (TYPE_TAG_NAME (type) == NULL)
+	    fprintf_filtered (stream, "{...}");
+	}
+      else if (show > 0 || TYPE_TAG_NAME (type) == NULL)
+	{
+	  java_type_print_derivation_info (stream, type);
+	  
+	  fprintf_filtered (stream, "{\n");
+	  if ((TYPE_NFIELDS (type) == 0) && (TYPE_NFN_FIELDS (type) == 0))
+	    if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
+	      fprintfi_filtered (level + 4, stream, "<incomplete type>\n");
+	    else
+	      fprintfi_filtered (level + 4, stream, "<no data fields>\n");
+
+	  /* If there is a base class for this type,
+	     do not print the field that it occupies.  */
+
+	  len = TYPE_NFIELDS (type);
+	  for (i = TYPE_N_BASECLASSES (type); i < len; i++)
+	    {
+	      QUIT;
+	      /* Don't print out virtual function table.  */
+	      if (STREQN (TYPE_FIELD_NAME (type, i), "_vptr", 5)
+		  && is_cplus_marker ((TYPE_FIELD_NAME (type, i))[5]))
+		continue;
+
+	      /* Don't print the dummy field "class". */
+	      if (STREQN (TYPE_FIELD_NAME (type, i), "class", 5))
+		continue;
+
+	      print_spaces_filtered (level + 4, stream);
+
+	      if (HAVE_CPLUS_STRUCT (type))
+		if (TYPE_FIELD_PROTECTED (type, i))
+		  fprintf_filtered (stream, "protected ");
+		else if (TYPE_FIELD_PRIVATE (type, i))
+		  fprintf_filtered (stream, "private ");
+		else
+		  fprintf_filtered (stream, "public ");
+
+	      if (TYPE_FIELD_STATIC (type, i))
+		fprintf_filtered (stream, "static ");
+
+	      java_print_type (TYPE_FIELD_TYPE (type, i),
+			       TYPE_FIELD_NAME (type, i),
+			       stream, show - 1, level + 4);
+
+	      fprintf_filtered (stream, ";\n");
+	    }
+
+	  /* If there are both fields and methods, put a space between. */
+	  len = TYPE_NFN_FIELDS (type);
+	  if (len)
+	     fprintf_filtered (stream, "\n");
+
+	  /* Print out the methods */
+
+	  for (i = 0; i < len; i++)
+	    {
+	      struct fn_field *f;
+	      int j;
+	      char *method_name;
+	      char *name;
+	      int is_constructor;
+	      int n_overloads;
+
+	      f = TYPE_FN_FIELDLIST1 (type, i);
+	      n_overloads = TYPE_FN_FIELDLIST_LENGTH (type, i);
+	      method_name = TYPE_FN_FIELDLIST_NAME (type, i);
+	      name = type_name_no_tag (type);
+	      is_constructor = name && STREQ (method_name, name);
+
+	      for (j = 0; j < n_overloads; j++)
+		{
+		  char *physname;
+		  int is_full_physname_constructor;
+
+		  physname = TYPE_FN_FIELD_PHYSNAME (f, j);
+
+		  is_full_physname_constructor = 
+		    ((physname[0] == '_' && physname[1] == '_'
+		      && strchr ("0123456789Qt", physname[2]))
+		     || STREQN (physname, "__ct__", 6)
+		     || DESTRUCTOR_PREFIX_P (physname)
+		     || STREQN (physname, "__dt__", 6));
+
+		  QUIT;
+
+		  print_spaces_filtered (level + 4, stream);
+
+		  if (TYPE_FN_FIELD_PROTECTED (f, j))
+		    fprintf_filtered (stream, "protected ");
+		  else if (TYPE_FN_FIELD_PRIVATE (f, j))
+		    fprintf_filtered (stream, "private ");
+		  else if (TYPE_FN_FIELD_PUBLIC (f, j))
+		    fprintf_filtered (stream, "public ");
+
+		  if (TYPE_FN_FIELD_ABSTRACT (f, j))
+		    fprintf_filtered (stream, "abstract ");
+		  if (TYPE_FN_FIELD_STATIC (f, j))
+		    fprintf_filtered (stream, "static ");
+		  if (TYPE_FN_FIELD_FINAL (f, j))
+		    fprintf_filtered (stream, "final ");
+		  if (TYPE_FN_FIELD_SYNCHRONIZED (f, j))
+		    fprintf_filtered (stream, "synchronized ");
+		  if (TYPE_FN_FIELD_NATIVE (f, j))
+		    fprintf_filtered (stream, "native ");
+
+		  if (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)) == 0)
+		    {
+		      /* Keep GDB from crashing here.  */
+		      fprintf_filtered (stream, "<undefined type> %s;\n",
+			       TYPE_FN_FIELD_PHYSNAME (f, j));
+		      break;
+		    }
+		  else if (!is_constructor && !is_full_physname_constructor)
+		    {
+		      type_print (TYPE_TARGET_TYPE (TYPE_FN_FIELD_TYPE (f, j)),
+				  "", stream, -1);
+		      fputs_filtered (" ", stream);
+		    }
+
+		  if (TYPE_FN_FIELD_STUB (f, j))
+		    /* Build something we can demangle.  */
+		    mangled_name = gdb_mangle_name (type, i, j);
+		  else
+		    mangled_name = TYPE_FN_FIELD_PHYSNAME (f, j);
+
+		  demangled_name =
+		    cplus_demangle (mangled_name,
+				    DMGL_ANSI | DMGL_PARAMS | DMGL_JAVA);
+
+		  if (demangled_name == NULL)
+		    demangled_name = strdup (mangled_name);
+
+		  {
+		    char *demangled_no_class;
+		    char *ptr;
+
+		    ptr = demangled_no_class = demangled_name;
+
+		    while (1)
+		      {
+			char c;
+
+			c = *ptr++;
+
+			if (c == 0 || c == '(')
+			  break;
+			if (c == '.')
+			  demangled_no_class = ptr;
+		      }
+
+		    fputs_filtered (demangled_no_class, stream);
+		    free (demangled_name);
+		  }
+
+		  if (TYPE_FN_FIELD_STUB (f, j))
+		    free (mangled_name);
+
+		  fprintf_filtered (stream, ";\n");
+		}
+	    }
+
+	  fprintfi_filtered (level, stream, "}");
+	}
+      break;
+
+      default:
+	c_type_print_base (type, stream, show, level);
+    }
+}
+
+/* LEVEL is the depth to indent lines by.  */
+
+void
+java_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  int demangled_args;
+
+  java_type_print_base (type, stream, show, level);
+
+  if (varstring != NULL && *varstring != '\0')
+    {
+      fputs_filtered (" ", stream);
+      fputs_filtered (varstring, stream);
+    }
+
+  /* For demangled function names, we have the arglist as part of the name,
+     so don't print an additional pair of ()'s */
+
+  demangled_args = strchr(varstring, '(') != NULL;
+  c_type_print_varspec_suffix (type, stream, show, 0, demangled_args);
+}
diff --git a/gdb/jv-valprint.c b/gdb/jv-valprint.c
new file mode 100644
index 0000000..6bfae7e
--- /dev/null
+++ b/gdb/jv-valprint.c
@@ -0,0 +1,526 @@
+/* Support for printing Java values for GDB, the GNU debugger.
+   Copyright 1997, 1998, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "demangle.h"
+#include "valprint.h"
+#include "language.h"
+#include "jv-lang.h"
+#include "c-lang.h"
+
+int
+java_value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  struct type *type;
+  CORE_ADDR address;
+  int i;
+  char *name;
+
+  type = VALUE_TYPE (val);
+  address = VALUE_ADDRESS (val) + VALUE_OFFSET (val);
+
+  if (is_object_type (type))
+    {
+      CORE_ADDR obj_addr;
+
+      /* Get the run-time type, and cast the object into that */
+
+      obj_addr = unpack_pointer (type, VALUE_CONTENTS (val));
+
+      if (obj_addr != 0)
+	{
+	  type = type_from_class (java_class_from_object (val));
+	  type = lookup_pointer_type (type);
+
+	  val = value_at (type, address, NULL);
+	}
+    }
+
+  if (TYPE_CODE (type) == TYPE_CODE_PTR && ! value_logical_not (val))
+    type_print (TYPE_TARGET_TYPE (type), "", stream, -1);
+
+  name = TYPE_TAG_NAME (type);
+  if (TYPE_CODE (type) == TYPE_CODE_STRUCT && name != NULL
+      && (i = strlen (name), name[i-1] == ']'))
+    {
+      char buf4[4];
+      long length;
+      unsigned int things_printed = 0;
+      int reps; 
+      struct type *el_type = java_primitive_type_from_name (name, i - 2);
+
+      i = 0;
+      read_memory (address + JAVA_OBJECT_SIZE, buf4, 4);
+
+      length = (long) extract_signed_integer (buf4, 4);
+      fprintf_filtered (stream, "{length: %ld", length);
+
+      if (el_type == NULL)
+	{
+	  CORE_ADDR element, next_element;
+
+	  address += JAVA_OBJECT_SIZE + 4; /* Skip object header and length. */
+
+	  while (i < length && things_printed < print_max)
+	    {
+	      char buf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+
+	      fputs_filtered (", ", stream);
+	      wrap_here (n_spaces (2));
+
+	      if (i > 0)
+		element = next_element;
+	      else
+		{
+		  read_memory (address, buf, sizeof(buf));
+		  address += TARGET_PTR_BIT / HOST_CHAR_BIT;
+		  element = extract_address (buf, sizeof(buf));
+		}
+
+	      for (reps = 1;  i + reps < length;  reps++)
+		{
+		  read_memory (address, buf, sizeof(buf));
+		  address += TARGET_PTR_BIT / HOST_CHAR_BIT;
+		  next_element = extract_address (buf, sizeof(buf));
+		  if (next_element != element)
+		    break;
+		}
+
+	      if (reps == 1)
+		fprintf_filtered (stream, "%d: ", i);
+	      else
+		fprintf_filtered (stream, "%d..%d: ", i, i + reps - 1);
+
+	      if (element == 0)
+		fprintf_filtered (stream, "null");
+	      else
+		fprintf_filtered (stream, "@%x", element);
+
+	      things_printed++;
+	      i += reps;
+	    }
+	}
+      else
+	{
+	  value_ptr v = allocate_value (el_type);
+	  value_ptr next_v = allocate_value (el_type);
+
+	  VALUE_ADDRESS (v) = address + JAVA_OBJECT_SIZE + 4;
+	  VALUE_ADDRESS (next_v) = VALUE_ADDRESS (v);
+
+	  while (i < length && things_printed < print_max)
+	    {
+	      fputs_filtered (", ", stream);
+	      wrap_here (n_spaces (2));
+
+	      if (i > 0)
+		{
+		  value_ptr tmp;
+
+		  tmp = next_v;
+		  next_v = v;
+		  v = tmp;
+		}
+	      else
+		{
+		  VALUE_LAZY (v) = 1;
+		  VALUE_OFFSET (v) = 0;
+		}
+
+	      VALUE_OFFSET (next_v) = VALUE_OFFSET (v);
+
+	      for (reps = 1;  i + reps < length;  reps++)
+		{
+		  VALUE_LAZY (next_v) = 1;
+		  VALUE_OFFSET (next_v) += TYPE_LENGTH (el_type);
+		  if (memcmp (VALUE_CONTENTS (v), VALUE_CONTENTS (next_v),
+			      TYPE_LENGTH (el_type)) != 0)
+		    break;
+		}
+
+	      if (reps == 1)
+		fprintf_filtered (stream, "%d: ", i);
+	      else
+		fprintf_filtered (stream, "%d..%d: ", i, i + reps - 1);
+
+	      val_print (VALUE_TYPE (v), VALUE_CONTENTS (v), 0, 0,
+			 stream, format, 2, 1, pretty);
+
+	      things_printed++;
+	      i += reps;
+	    }
+	}
+
+      if (i < length)
+	fprintf_filtered (stream, "...");
+
+      fprintf_filtered (stream, "}");
+
+      return 0;
+    }
+
+  /* If it's type String, print it */
+
+  if (TYPE_CODE (type) == TYPE_CODE_PTR
+      && TYPE_TARGET_TYPE (type)
+      && TYPE_NAME (TYPE_TARGET_TYPE (type))
+      && strcmp (TYPE_NAME (TYPE_TARGET_TYPE (type)), "java.lang.String") == 0
+      && (format == 0 || format == 's')
+      && address != 0)
+    {
+      value_ptr data_val;
+      CORE_ADDR data;
+      value_ptr boffset_val;
+      unsigned long boffset;
+      value_ptr count_val;
+      unsigned long count;
+      value_ptr mark;
+
+      mark = value_mark ();	/* Remember start of new values */
+
+      data_val = value_struct_elt (&val, NULL, "data", NULL, NULL);
+      data = value_as_pointer (data_val);
+
+      boffset_val = value_struct_elt (&val, NULL, "boffset", NULL, NULL);
+      boffset = value_as_pointer (boffset_val);
+
+      count_val = value_struct_elt (&val, NULL, "count", NULL, NULL);
+      count = value_as_pointer (count_val);
+
+      value_free_to_mark (mark); /* Release unnecessary values */
+
+      val_print_string (data + boffset, count, 2, stream);
+
+      return 0;
+    }
+
+  return (val_print (type, VALUE_CONTENTS (val), 0, address,
+		     stream, format, 1, 0, pretty));
+}
+
+/* TYPE, VALADDR, ADDRESS, STREAM, RECURSE, and PRETTY have the
+   same meanings as in cp_print_value and c_val_print.
+
+   DONT_PRINT is an array of baseclass types that we
+   should not print, or zero if called from top level.  */
+
+void
+java_print_value_fields (type, valaddr, address, stream,
+			 format, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  int i, len, n_baseclasses;
+
+  CHECK_TYPEDEF (type);
+
+  fprintf_filtered (stream, "{");
+  len = TYPE_NFIELDS (type);
+  n_baseclasses = TYPE_N_BASECLASSES (type);
+
+  if (n_baseclasses > 0)
+    {
+      int i, n_baseclasses = TYPE_N_BASECLASSES (type);
+
+      for (i = 0; i < n_baseclasses; i++)
+	{
+	  int boffset;
+	  struct type *baseclass = check_typedef (TYPE_BASECLASS (type, i));
+	  char *basename = TYPE_NAME (baseclass);
+	  char *base_valaddr;
+	  
+	  if (BASETYPE_VIA_VIRTUAL (type, i))
+	    continue;
+
+	  if (basename != NULL && strcmp (basename, "java.lang.Object") == 0)
+	    continue;
+
+	  boffset = 0;
+
+	  if (pretty)
+	    {
+	      fprintf_filtered (stream, "\n");
+	      print_spaces_filtered (2 * (recurse+1), stream);
+	    }
+	  fputs_filtered ("<", stream);
+	  /* Not sure what the best notation is in the case where there is no
+	     baseclass name.  */
+	  fputs_filtered (basename ? basename : "", stream);
+	  fputs_filtered ("> = ", stream);
+
+	  base_valaddr = valaddr;
+
+	  java_print_value_fields (baseclass, base_valaddr, address + boffset,
+				   stream, format, recurse+1, pretty);
+	  fputs_filtered (", ", stream);
+	  
+	flush_it:
+	  ;
+	}
+
+    }
+
+  if (!len && n_baseclasses == 1)
+    fprintf_filtered (stream, "<No data fields>");
+  else
+    {
+      extern int inspect_it;
+      int fields_seen = 0;
+
+      for (i = n_baseclasses; i < len; i++)
+	{
+	  /* If requested, skip printing of static fields.  */
+	  if (TYPE_FIELD_STATIC (type, i))
+	    {
+	      char *name = TYPE_FIELD_NAME (type, i);
+	      if (!static_field_print)
+		continue;
+	      if (name != NULL && strcmp (name, "class") == 0)
+		continue;
+	    }
+	  if (fields_seen)
+	    fprintf_filtered (stream, ", ");
+	  else if (n_baseclasses > 0)
+	    {
+	      if (pretty)
+		{
+		  fprintf_filtered (stream, "\n");
+		  print_spaces_filtered (2 + 2 * recurse, stream);
+		  fputs_filtered ("members of ", stream);
+		  fputs_filtered (type_name_no_tag (type), stream);
+		  fputs_filtered (": ", stream);
+		}
+	    }
+	  fields_seen = 1;
+
+	  if (pretty)
+	    {
+	      fprintf_filtered (stream, "\n");
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  else 
+	    {
+	      wrap_here (n_spaces (2 + 2 * recurse));
+	    }
+	  if (inspect_it)
+	    {
+	      if (TYPE_CODE (TYPE_FIELD_TYPE (type, i)) == TYPE_CODE_PTR)
+		fputs_filtered ("\"( ptr \"", stream);
+	      else
+		fputs_filtered ("\"( nodef \"", stream);
+	      if (TYPE_FIELD_STATIC (type, i))
+		fputs_filtered ("static ", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      fputs_filtered ("\" \"", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      fputs_filtered ("\") \"", stream);
+	    }
+	  else
+	    {
+	      annotate_field_begin (TYPE_FIELD_TYPE (type, i));
+
+	      if (TYPE_FIELD_STATIC (type, i))
+		fputs_filtered ("static ", stream);
+	      fprintf_symbol_filtered (stream, TYPE_FIELD_NAME (type, i),
+				       language_cplus,
+				       DMGL_PARAMS | DMGL_ANSI);
+	      annotate_field_name_end ();
+	      fputs_filtered (": ", stream);
+	      annotate_field_value ();
+	    }
+
+	  if (!TYPE_FIELD_STATIC (type, i) && TYPE_FIELD_PACKED (type, i))
+	    {
+	      value_ptr v;
+
+	      /* Bitfields require special handling, especially due to byte
+		 order problems.  */
+	      if (TYPE_FIELD_IGNORE (type, i))
+		{
+		   fputs_filtered ("<optimized out or zero length>", stream);
+		}
+	      else
+		{
+	           v = value_from_longest (TYPE_FIELD_TYPE (type, i),
+				   unpack_field_as_long (type, valaddr, i));
+
+                   val_print (TYPE_FIELD_TYPE(type, i), VALUE_CONTENTS (v), 0,
+			      0, stream, format, 0, recurse + 1, pretty);
+		}
+	    }
+	  else
+	    {
+	      if (TYPE_FIELD_IGNORE (type, i))
+		{
+		   fputs_filtered ("<optimized out or zero length>", stream);
+		}
+	      else if (TYPE_FIELD_STATIC (type, i))
+		{
+		  value_ptr v = value_static_field (type, i);
+		  if (v == NULL)
+		    fputs_filtered ("<optimized out>", stream);
+		  else
+		    {
+		      struct type *t = check_typedef (VALUE_TYPE (v));
+		      if (TYPE_CODE (t) == TYPE_CODE_STRUCT)
+			v = value_addr (v);
+		      val_print (VALUE_TYPE (v),
+				 VALUE_CONTENTS (v), 0, VALUE_ADDRESS (v),
+				 stream, format, 0, recurse+1, pretty);
+		    }
+		}
+	      else
+		{
+	           val_print (TYPE_FIELD_TYPE (type, i), 
+			      valaddr + TYPE_FIELD_BITPOS (type, i) / 8, 0,
+			      address + TYPE_FIELD_BITPOS (type, i) / 8,
+			      stream, format, 0, recurse + 1, pretty);
+		}
+	    }
+	  annotate_field_end ();
+	}
+
+      if (pretty)
+	{
+	  fprintf_filtered (stream, "\n");
+	  print_spaces_filtered (2 * recurse, stream);
+	}
+    }
+  fprintf_filtered (stream, "}");
+}
+
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+   the inferior at address ADDRESS, onto stdio stream STREAM according to
+   FORMAT (a letter or 0 for natural format).  The data at VALADDR is in
+   target byte order.
+
+   If the data are a string pointer, returns the number of string characters
+   printed.
+
+   If DEREF_REF is nonzero, then dereference references, otherwise just print
+   them like pointers.
+
+   The PRETTY parameter controls prettyprinting.  */
+
+int
+java_val_print (type, valaddr, embedded_offset, address, stream, format,
+		deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  register unsigned int i = 0;		/* Number of characters printed */
+  struct type *target_type;
+  CORE_ADDR addr;
+
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_PTR:
+      if (format && format != 's')
+	{
+	  print_scalar_formatted (valaddr, type, format, 0, stream);
+	  break;
+	}
+#if 0
+      if (vtblprint && cp_is_vtbl_ptr_type(type))
+	{
+          /* Print the unmangled name if desired.  */
+	  /* Print vtable entry - we only get here if we ARE using
+	     -fvtable_thunks.  (Otherwise, look under TYPE_CODE_STRUCT.) */
+	  print_address_demangle(extract_address (valaddr, TYPE_LENGTH (type)),
+				 stream, demangle);
+	  break;
+	}
+#endif
+      addr = unpack_pointer (type, valaddr);
+      if (addr == 0)
+	{
+	  fputs_filtered ("null", stream);
+	  return i;
+	}
+      target_type = check_typedef (TYPE_TARGET_TYPE (type));
+
+      if (TYPE_CODE (target_type) == TYPE_CODE_FUNC)
+	{
+	  /* Try to print what function it points to.  */
+	  print_address_demangle (addr, stream, demangle);
+	  /* Return value is irrelevant except for string pointers.  */
+	  return (0);
+	}
+
+      if (addressprint && format != 's')
+	{
+	  fputs_filtered ("@", stream);
+	  print_longest (stream, 'x', 0, (ULONGEST) addr);
+	}
+
+      return i;
+
+    case TYPE_CODE_CHAR:
+      format = format ? format : output_format;
+      if (format)
+	print_scalar_formatted (valaddr, type, format, 0, stream);
+      else
+	LA_PRINT_CHAR ((int) unpack_long (type, valaddr), stream);
+      break;
+
+    case TYPE_CODE_INT:
+      /* Can't just call c_val_print because that print bytes as C chars. */
+      format = format ? format : output_format;
+      if (format)
+	print_scalar_formatted (valaddr, type, format, 0, stream);
+      else
+	val_print_type_code_int (type, valaddr, stream);
+      break;
+
+    case TYPE_CODE_STRUCT:
+      java_print_value_fields (type, valaddr, address, stream, format,
+			       recurse, pretty);
+      break;
+
+    default:
+      return c_val_print (type, valaddr, embedded_offset, address, stream,
+			  format, deref_ref, recurse, pretty);
+    }
+
+  return 0;
+}
diff --git a/gdb/kdb-start.c b/gdb/kdb-start.c
new file mode 100644
index 0000000..bec558f
--- /dev/null
+++ b/gdb/kdb-start.c
@@ -0,0 +1,35 @@
+/* Main loop for the standalone kernel debugger, for GDB, the GNU Debugger.
+   Copyright 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+static char *args[] = {"kdb", "kdb-symbols", 0};
+
+static char *environment[] = {0};
+
+char **environ;
+
+start ()
+{
+  INIT_STACK (kdb_stack_beg, kdb_stack_end);
+
+  environ = environment;
+
+  main (2, args, environment);
+}
diff --git a/gdb/language.c b/gdb/language.c
new file mode 100644
index 0000000..225d423
--- /dev/null
+++ b/gdb/language.c
@@ -0,0 +1,1451 @@
+/* Multiple source language support for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+   Contributed by the Department of Computer Science at the State University
+   of New York at Buffalo.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file contains functions that return things that are specific
+   to languages.  Each function should examine current_language if necessary,
+   and return the appropriate result. */
+
+/* FIXME:  Most of these would be better organized as macros which
+   return data out of a "language-specific" struct pointer that is set
+   whenever the working language changes.  That would be a lot faster.  */
+
+#include "defs.h"
+#include <ctype.h>
+#include "gdb_string.h"
+
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "gdbcmd.h"
+#include "frame.h"
+#include "expression.h"
+#include "language.h"
+#include "target.h"
+#include "parser-defs.h"
+
+static void
+show_language_command PARAMS ((char *, int));
+
+static void
+set_language_command PARAMS ((char *, int));
+
+static void
+show_type_command PARAMS ((char *, int));
+
+static void
+set_type_command PARAMS ((char *, int));
+
+static void
+show_range_command PARAMS ((char *, int));
+
+static void
+set_range_command PARAMS ((char *, int));
+
+static void
+set_range_str PARAMS ((void));
+
+static void
+set_type_str PARAMS ((void));
+
+static void
+set_lang_str PARAMS ((void));
+
+static void
+unk_lang_error PARAMS ((char *));
+
+static int
+unk_lang_parser PARAMS ((void));
+
+static void
+show_check PARAMS ((char *, int));
+
+static void
+set_check PARAMS ((char *, int));
+
+static void
+set_type_range PARAMS ((void));
+
+static void
+unk_lang_emit_char PARAMS ((int c, GDB_FILE *stream, int quoter));
+
+static void
+unk_lang_printchar PARAMS ((int c, GDB_FILE *stream));
+
+static void
+unk_lang_printstr PARAMS ((GDB_FILE *stream, char *string, unsigned int length, int width, int force_ellipses));
+
+static struct type *
+unk_lang_create_fundamental_type PARAMS ((struct objfile *, int));
+
+static void
+unk_lang_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+static int
+unk_lang_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *,
+			    int, int, int, enum val_prettyprint));
+
+static int
+unk_lang_value_print PARAMS ((value_ptr, GDB_FILE *, int, enum val_prettyprint));
+
+/* Forward declaration */
+extern const struct language_defn unknown_language_defn;
+extern char *warning_pre_print;
+  
+/* The current (default at startup) state of type and range checking.
+    (If the modes are set to "auto", though, these are changed based
+    on the default language at startup, and then again based on the
+    language of the first source file.  */
+
+enum range_mode range_mode = range_mode_auto;
+enum range_check range_check = range_check_off;
+enum type_mode type_mode = type_mode_auto;
+enum type_check type_check = type_check_off;
+
+/* The current language and language_mode (see language.h) */
+
+const struct language_defn *current_language = &unknown_language_defn;
+enum language_mode language_mode = language_mode_auto;
+
+/* The language that the user expects to be typing in (the language
+   of main(), or the last language we notified them about, or C).  */
+
+const struct language_defn *expected_language;
+
+/* The list of supported languages.  The list itself is malloc'd.  */
+
+static const struct language_defn **languages;
+static unsigned languages_size;
+static unsigned languages_allocsize;
+#define	DEFAULT_ALLOCSIZE 4
+
+/* The "set language/type/range" commands all put stuff in these
+   buffers.  This is to make them work as set/show commands.  The
+   user's string is copied here, then the set_* commands look at
+   them and update them to something that looks nice when it is
+   printed out. */
+
+static char *language;
+static char *type;
+static char *range;
+
+/* Warning issued when current_language and the language of the current
+   frame do not match. */
+char lang_frame_mismatch_warn[] =
+	"Warning: the current language does not match this frame.";
+
+
+/* This page contains the functions corresponding to GDB commands
+   and their helpers. */
+
+/* Show command.  Display a warning if the language set
+   does not match the frame. */
+static void
+show_language_command (ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   enum language flang;		/* The language of the current frame */
+
+   flang = get_frame_language();
+   if (flang != language_unknown &&
+       language_mode == language_mode_manual &&
+       current_language->la_language != flang)
+     printf_filtered("%s\n",lang_frame_mismatch_warn);
+}
+
+/* Set command.  Change the current working language. */
+static void
+set_language_command (ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+  int i;
+  enum language flang;
+  char *err_lang;
+
+  if (!language || !language[0])
+    {
+      printf_unfiltered("The currently understood settings are:\n\n");
+      printf_unfiltered ("local or auto    Automatic setting based on source file\n");
+
+      for (i = 0; i < languages_size; ++i)
+	{
+	  /* Already dealt with these above.  */
+	  if (languages[i]->la_language == language_unknown
+	      || languages[i]->la_language == language_auto)
+	    continue;
+
+	  /* FIXME for now assume that the human-readable name is just
+	     a capitalization of the internal name.  */
+	  printf_unfiltered ("%-16s Use the %c%s language\n",
+			     languages[i]->la_name,
+			     /* Capitalize first letter of language
+				name.  */
+			     toupper (languages[i]->la_name[0]),
+			     languages[i]->la_name + 1);
+	}
+      /* Restore the silly string. */
+      set_language(current_language->la_language);
+      return;
+    }
+
+  /* Search the list of languages for a match.  */
+  for (i = 0; i < languages_size; i++) {
+    if (STREQ (languages[i]->la_name, language)) {
+      /* Found it!  Go into manual mode, and use this language.  */
+      if (languages[i]->la_language == language_auto) {
+	/* Enter auto mode.  Set to the current frame's language, if known.  */
+	language_mode = language_mode_auto;
+  	flang = get_frame_language();
+	if (flang!=language_unknown)
+	  set_language(flang);
+	expected_language = current_language;
+	return;
+      } else {
+	/* Enter manual mode.  Set the specified language.  */
+	language_mode = language_mode_manual;
+	current_language = languages[i];
+	set_type_range ();
+	set_lang_str();
+	expected_language = current_language;
+	return;
+      }
+    }
+  }
+
+  /* Reset the language (esp. the global string "language") to the 
+     correct values. */
+  err_lang=savestring(language,strlen(language));
+  make_cleanup (free, err_lang);	/* Free it after error */
+  set_language(current_language->la_language);
+  error ("Unknown language `%s'.",err_lang);
+}
+
+/* Show command.  Display a warning if the type setting does
+   not match the current language. */
+static void
+show_type_command(ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   if (type_check != current_language->la_type_check)
+      printf_unfiltered(
+"Warning: the current type check setting does not match the language.\n");
+}
+
+/* Set command.  Change the setting for type checking. */
+static void
+set_type_command(ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   if (STREQ(type,"on"))
+   {
+      type_check = type_check_on;
+      type_mode = type_mode_manual;
+   }
+   else if (STREQ(type,"warn"))
+   {
+      type_check = type_check_warn;
+      type_mode = type_mode_manual;
+   }
+   else if (STREQ(type,"off"))
+   {
+      type_check = type_check_off;
+      type_mode = type_mode_manual;
+   }
+   else if (STREQ(type,"auto"))
+   {
+      type_mode = type_mode_auto;
+      set_type_range();
+      /* Avoid hitting the set_type_str call below.  We
+         did it in set_type_range. */
+      return;
+   }
+   set_type_str();
+   show_type_command((char *)NULL, from_tty);
+}
+
+/* Show command.  Display a warning if the range setting does
+   not match the current language. */
+static void
+show_range_command(ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+
+   if (range_check != current_language->la_range_check)
+      printf_unfiltered(
+"Warning: the current range check setting does not match the language.\n");
+}
+
+/* Set command.  Change the setting for range checking. */
+static void
+set_range_command(ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   if (STREQ(range,"on"))
+   {
+      range_check = range_check_on;
+      range_mode = range_mode_manual;
+   }
+   else if (STREQ(range,"warn"))
+   {
+      range_check = range_check_warn;
+      range_mode = range_mode_manual;
+   }
+   else if (STREQ(range,"off"))
+   {
+      range_check = range_check_off;
+      range_mode = range_mode_manual;
+   }
+   else if (STREQ(range,"auto"))
+   {
+      range_mode = range_mode_auto;
+      set_type_range();
+      /* Avoid hitting the set_range_str call below.  We
+	 did it in set_type_range. */
+      return;
+   }
+   set_range_str();
+   show_range_command((char *)0, from_tty);
+}
+
+/* Set the status of range and type checking based on
+   the current modes and the current language.
+   If SHOW is non-zero, then print out the current language,
+   type and range checking status. */
+static void
+set_type_range()
+{
+
+  if (range_mode == range_mode_auto)
+    range_check = current_language->la_range_check;
+
+  if (type_mode == type_mode_auto)
+    type_check = current_language->la_type_check;
+
+  set_type_str();
+  set_range_str();
+}
+
+/* Set current language to (enum language) LANG.  Returns previous language. */
+
+enum language
+set_language(lang)
+   enum language lang;
+{
+  int i;
+  enum language prev_language;
+
+  prev_language = current_language->la_language;
+
+  for (i = 0; i < languages_size; i++) {
+    if (languages[i]->la_language == lang) {
+      current_language = languages[i];
+      set_type_range ();
+      set_lang_str();
+      break;
+    }
+  }
+
+  return prev_language;
+}
+
+/* This page contains functions that update the global vars
+   language, type and range. */
+static void
+set_lang_str()
+{
+   char *prefix = "";
+
+   free (language);
+   if (language_mode == language_mode_auto)
+      prefix = "auto; currently ";
+
+   language = concat(prefix, current_language->la_name, NULL);
+}
+
+static void
+set_type_str()
+{
+   char *tmp, *prefix = "";
+
+   free (type);
+   if (type_mode==type_mode_auto)
+      prefix = "auto; currently ";
+
+   switch(type_check)
+   {
+   case type_check_on:
+      tmp = "on";
+      break;
+   case type_check_off:
+      tmp = "off";
+      break;
+   case type_check_warn:
+      tmp = "warn";
+      break;
+      default:
+      error ("Unrecognized type check setting.");
+   }
+
+   type = concat(prefix,tmp,NULL);
+}
+
+static void
+set_range_str()
+{
+   char *tmp, *pref = "";
+
+   free (range);
+   if (range_mode==range_mode_auto)
+      pref = "auto; currently ";
+
+   switch(range_check)
+   {
+   case range_check_on:
+      tmp = "on";
+      break;
+   case range_check_off:
+      tmp = "off";
+      break;
+   case range_check_warn:
+      tmp = "warn";
+      break;
+      default:
+      error ("Unrecognized range check setting.");
+   }
+
+   range = concat(pref,tmp,NULL);
+}
+
+
+/* Print out the current language settings: language, range and
+   type checking.  If QUIETLY, print only what has changed.  */
+
+void
+language_info (quietly)
+     int quietly;
+{
+  if (quietly && expected_language == current_language)
+    return;
+
+  expected_language = current_language;
+  printf_unfiltered("Current language:  %s\n",language);
+  show_language_command((char *)0, 1);
+
+  if (!quietly)
+    {
+       printf_unfiltered("Type checking:     %s\n",type);
+       show_type_command((char *)0, 1);
+       printf_unfiltered("Range checking:    %s\n",range);
+       show_range_command((char *)0, 1);
+    }
+}
+
+/* Return the result of a binary operation. */
+
+#if 0	/* Currently unused */
+
+struct type *
+binop_result_type (v1, v2)
+   value_ptr v1, v2;
+{
+   int size,uns;
+   struct type *t1 = check_typedef (VALUE_TYPE (v1));
+   struct type *t2 = check_typedef (VALUE_TYPE (v2));
+
+   int l1 = TYPE_LENGTH (t1);
+   int l2 = TYPE_LENGTH (t2);
+
+   switch(current_language->la_language)
+   {
+   case language_c:
+   case language_cplus:
+      if (TYPE_CODE (t1)==TYPE_CODE_FLT)
+	 return TYPE_CODE(t2) == TYPE_CODE_FLT && l2 > l1 ?
+	    VALUE_TYPE(v2) : VALUE_TYPE(v1);
+      else if (TYPE_CODE(t2)==TYPE_CODE_FLT)
+	 return TYPE_CODE(t1)) == TYPE_CODE_FLT && l1 > l2 ?
+	    VALUE_TYPE(v1) : VALUE_TYPE(v2);
+      else if (TYPE_UNSIGNED(t1) && l1 > l2)
+	 return VALUE_TYPE(v1);
+      else if (TYPE_UNSIGNED(t2) && l2 > l1)
+	 return VALUE_TYPE(v2);
+      else  /* Both are signed.  Result is the longer type */
+	 return l1 > l2 ? VALUE_TYPE(v1) : VALUE_TYPE(v2);
+      break;
+   case language_m2:
+      /* If we are doing type-checking, l1 should equal l2, so this is
+	 not needed. */
+      return l1 > l2 ? VALUE_TYPE(v1) : VALUE_TYPE(v2);
+      break;
+   case language_chill:
+      error ("Missing Chill support in function binop_result_check.");/*FIXME*/
+   }
+   abort();
+   return (struct type *)0;	/* For lint */
+}
+
+#endif	/* 0 */
+
+
+/* This page contains functions that return format strings for
+   printf for printing out numbers in different formats */
+
+/* Returns the appropriate printf format for hexadecimal
+   numbers. */
+char *
+local_hex_format_custom(pre)
+   char *pre;
+{
+   static char form[50];
+
+   strcpy (form, local_hex_format_prefix ());
+   strcat (form, "%");
+   strcat (form, pre);
+   strcat (form, local_hex_format_specifier ());
+   strcat (form, local_hex_format_suffix ());
+   return form;
+}
+
+/* Converts a number to hexadecimal and stores it in a static
+   string.  Returns a pointer to this string. */
+char *
+local_hex_string (num)
+   unsigned long num;
+{
+   static char res[50];
+
+   sprintf (res, local_hex_format(), num);
+   return res;
+}
+
+/* Converts a number to custom hexadecimal and stores it in a static
+   string.  Returns a pointer to this string. */
+char *
+local_hex_string_custom(num,pre)
+   unsigned long num;
+   char *pre;
+{
+   static char res[50];
+
+   sprintf (res, local_hex_format_custom(pre), num);
+   return res;
+}
+
+/* Returns the appropriate printf format for octal
+   numbers. */
+char *
+local_octal_format_custom(pre)
+   char *pre;
+{
+   static char form[50];
+
+   strcpy (form, local_octal_format_prefix ());
+   strcat (form, "%");
+   strcat (form, pre);
+   strcat (form, local_octal_format_specifier ());
+   strcat (form, local_octal_format_suffix ());
+   return form;
+}
+
+/* Returns the appropriate printf format for decimal numbers. */
+char *
+local_decimal_format_custom(pre)
+   char *pre;
+{
+   static char form[50];
+
+   strcpy (form, local_decimal_format_prefix ());
+   strcat (form, "%");
+   strcat (form, pre);
+   strcat (form, local_decimal_format_specifier ());
+   strcat (form, local_decimal_format_suffix ());
+   return form;
+}
+
+#if 0
+/* This page contains functions that are used in type/range checking.
+   They all return zero if the type/range check fails.
+
+   It is hoped that these will make extending GDB to parse different
+   languages a little easier.  These are primarily used in eval.c when
+   evaluating expressions and making sure that their types are correct.
+   Instead of having a mess of conjucted/disjuncted expressions in an "if",
+   the ideas of type can be wrapped up in the following functions.
+
+   Note that some of them are not currently dependent upon which language
+   is currently being parsed.  For example, floats are the same in
+   C and Modula-2 (ie. the only floating point type has TYPE_CODE of
+   TYPE_CODE_FLT), while booleans are different. */
+
+/* Returns non-zero if its argument is a simple type.  This is the same for
+   both Modula-2 and for C.  In the C case, TYPE_CODE_CHAR will never occur,
+   and thus will never cause the failure of the test. */
+int
+simple_type(type)
+    struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type)) {
+  case TYPE_CODE_INT:
+  case TYPE_CODE_CHAR:
+  case TYPE_CODE_ENUM:
+  case TYPE_CODE_FLT:
+  case TYPE_CODE_RANGE:
+  case TYPE_CODE_BOOL:
+    return 1;
+
+  default:
+    return 0;
+  }
+}
+
+/* Returns non-zero if its argument is of an ordered type.
+   An ordered type is one in which the elements can be tested for the
+   properties of "greater than", "less than", etc, or for which the
+   operations "increment" or "decrement" make sense. */
+int
+ordered_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type)) {
+  case TYPE_CODE_INT:
+  case TYPE_CODE_CHAR:
+  case TYPE_CODE_ENUM:
+  case TYPE_CODE_FLT:
+  case TYPE_CODE_RANGE:
+    return 1;
+
+  default:
+    return 0;
+  }
+}
+
+/* Returns non-zero if the two types are the same */
+int
+same_type (arg1, arg2)
+   struct type *arg1, *arg2;
+{
+  CHECK_TYPEDEF (type);
+   if (structured_type(arg1) ? !structured_type(arg2) : structured_type(arg2))
+      /* One is structured and one isn't */
+      return 0;
+   else if (structured_type(arg1) && structured_type(arg2))
+      return arg1 == arg2;
+   else if (numeric_type(arg1) && numeric_type(arg2))
+      return (TYPE_CODE(arg2) == TYPE_CODE(arg1)) &&
+	 (TYPE_UNSIGNED(arg1) == TYPE_UNSIGNED(arg2))
+	    ? 1 : 0;
+   else
+      return arg1==arg2;
+}
+
+/* Returns non-zero if the type is integral */
+int
+integral_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+   switch(current_language->la_language)
+   {
+   case language_c:
+   case language_cplus:
+      return (TYPE_CODE(type) != TYPE_CODE_INT) &&
+	 (TYPE_CODE(type) != TYPE_CODE_ENUM) ? 0 : 1;
+   case language_m2:
+      return TYPE_CODE(type) != TYPE_CODE_INT ? 0 : 1;
+   case language_chill:
+      error ("Missing Chill support in function integral_type.");  /*FIXME*/
+   default:
+      error ("Language not supported.");
+   }
+}
+
+/* Returns non-zero if the value is numeric */
+int
+numeric_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  switch (TYPE_CODE (type)) {
+  case TYPE_CODE_INT:
+  case TYPE_CODE_FLT:
+    return 1;
+
+  default:
+    return 0;
+  }
+}
+
+/* Returns non-zero if the value is a character type */
+int
+character_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  switch(current_language->la_language)
+   {
+   case language_chill:
+   case language_m2:
+      return TYPE_CODE(type) != TYPE_CODE_CHAR ? 0 : 1;
+
+   case language_c:
+   case language_cplus:
+      return (TYPE_CODE(type) == TYPE_CODE_INT) &&
+	 TYPE_LENGTH(type) == sizeof(char)
+	 ? 1 : 0;
+   default:
+      return (0);
+   }
+}
+
+/* Returns non-zero if the value is a string type */
+int
+string_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  switch(current_language->la_language)
+   {
+   case language_chill:
+   case language_m2:
+      return TYPE_CODE(type) != TYPE_CODE_STRING ? 0 : 1;
+
+   case language_c:
+   case language_cplus:
+      /* C does not have distinct string type. */
+      return (0);
+   default:
+      return (0);
+   }
+}
+
+/* Returns non-zero if the value is a boolean type */
+int
+boolean_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  if (TYPE_CODE (type) == TYPE_CODE_BOOL)
+    return 1;
+  switch(current_language->la_language)
+    {
+    case language_c:
+    case language_cplus:
+      /* Might be more cleanly handled by having a TYPE_CODE_INT_NOT_BOOL
+	 for CHILL and such languages, or a TYPE_CODE_INT_OR_BOOL for C.  */
+      if (TYPE_CODE (type) == TYPE_CODE_INT)
+	return 1;
+   default:
+      break;
+   }
+  return 0;
+}
+
+/* Returns non-zero if the value is a floating-point type */
+int
+float_type (type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+  return TYPE_CODE(type) == TYPE_CODE_FLT;
+}
+
+/* Returns non-zero if the value is a pointer type */
+int
+pointer_type(type)
+   struct type *type;
+{
+   return TYPE_CODE(type) == TYPE_CODE_PTR ||
+      TYPE_CODE(type) == TYPE_CODE_REF;
+}
+
+/* Returns non-zero if the value is a structured type */
+int
+structured_type(type)
+   struct type *type;
+{
+  CHECK_TYPEDEF (type);
+   switch(current_language->la_language)
+   {
+   case language_c:
+   case language_cplus:
+      return (TYPE_CODE(type) == TYPE_CODE_STRUCT) ||
+	 (TYPE_CODE(type) == TYPE_CODE_UNION) ||
+	    (TYPE_CODE(type) == TYPE_CODE_ARRAY);
+   case language_m2:
+      return (TYPE_CODE(type) == TYPE_CODE_STRUCT) ||
+	 (TYPE_CODE(type) == TYPE_CODE_SET) ||
+	    (TYPE_CODE(type) == TYPE_CODE_ARRAY);
+   case language_chill:
+      error ("Missing Chill support in function structured_type.");  /*FIXME*/
+   default:
+      return (0);
+   }
+}
+#endif
+
+struct type *
+lang_bool_type ()
+{
+  struct symbol *sym;
+  struct type *type;
+  switch(current_language->la_language)
+    {
+    case language_chill:
+      return builtin_type_chill_bool;
+    case language_fortran:
+      sym = lookup_symbol ("logical", NULL, VAR_NAMESPACE, NULL, NULL);
+      if (sym)
+	{
+	  type = SYMBOL_TYPE (sym);
+	  if (type && TYPE_CODE (type) == TYPE_CODE_BOOL)
+	    return type;
+	}
+      return builtin_type_f_logical_s2;
+    case language_cplus:
+      sym = lookup_symbol ("bool", NULL, VAR_NAMESPACE, NULL, NULL);
+      if (sym)
+	{
+	  type = SYMBOL_TYPE (sym);
+	  if (type && TYPE_CODE (type) == TYPE_CODE_BOOL)
+	    return type;
+	}
+      return builtin_type_bool;
+    default:
+      return builtin_type_int;
+    }
+}
+
+/* This page contains functions that return info about
+   (struct value) values used in GDB. */
+
+/* Returns non-zero if the value VAL represents a true value. */
+int
+value_true (val)
+     value_ptr val;
+{
+  /* It is possible that we should have some sort of error if a non-boolean
+     value is used in this context.  Possibly dependent on some kind of
+     "boolean-checking" option like range checking.  But it should probably
+     not depend on the language except insofar as is necessary to identify
+     a "boolean" value (i.e. in C using a float, pointer, etc., as a boolean
+     should be an error, probably).  */
+  return !value_logical_not (val);
+}
+
+/* Returns non-zero if the operator OP is defined on
+   the values ARG1 and ARG2. */
+
+#if 0	/* Currently unused */
+
+void
+binop_type_check(arg1,arg2,op)
+   value_ptr arg1,arg2;
+   int op;
+{
+   struct type *t1, *t2;
+
+   /* If we're not checking types, always return success. */
+   if (!STRICT_TYPE)
+      return;
+
+   t1=VALUE_TYPE(arg1);
+   if (arg2 != NULL)
+      t2=VALUE_TYPE(arg2);
+   else
+      t2=NULL;
+
+   switch(op)
+   {
+   case BINOP_ADD:
+   case BINOP_SUB:
+      if ((numeric_type(t1) && pointer_type(t2)) ||
+	 (pointer_type(t1) && numeric_type(t2)))
+      {
+	 warning ("combining pointer and integer.\n");
+	 break;
+      }
+   case BINOP_MUL:
+   case BINOP_LSH:
+   case BINOP_RSH:
+      if (!numeric_type(t1) || !numeric_type(t2))
+	 type_op_error ("Arguments to %s must be numbers.",op);
+      else if (!same_type(t1,t2))
+	 type_op_error ("Arguments to %s must be of the same type.",op);
+      break;
+
+   case BINOP_LOGICAL_AND:
+   case BINOP_LOGICAL_OR:
+      if (!boolean_type(t1) || !boolean_type(t2))
+	 type_op_error ("Arguments to %s must be of boolean type.",op);
+      break;
+
+   case BINOP_EQUAL:
+      if ((pointer_type(t1) && !(pointer_type(t2) || integral_type(t2))) ||
+	 (pointer_type(t2) && !(pointer_type(t1) || integral_type(t1))))
+	 type_op_error ("A pointer can only be compared to an integer or pointer.",op);
+      else if ((pointer_type(t1) && integral_type(t2)) ||
+	 (integral_type(t1) && pointer_type(t2)))
+      {
+	 warning ("combining integer and pointer.\n");
+	 break;
+      }
+      else if (!simple_type(t1) || !simple_type(t2))
+	 type_op_error ("Arguments to %s must be of simple type.",op);
+      else if (!same_type(t1,t2))
+	 type_op_error ("Arguments to %s must be of the same type.",op);
+      break;
+
+   case BINOP_REM:
+   case BINOP_MOD:
+      if (!integral_type(t1) || !integral_type(t2))
+	 type_op_error ("Arguments to %s must be of integral type.",op);
+      break;
+
+   case BINOP_LESS:
+   case BINOP_GTR:
+   case BINOP_LEQ:
+   case BINOP_GEQ:
+      if (!ordered_type(t1) || !ordered_type(t2))
+	 type_op_error ("Arguments to %s must be of ordered type.",op);
+      else if (!same_type(t1,t2))
+	 type_op_error ("Arguments to %s must be of the same type.",op);
+      break;
+
+   case BINOP_ASSIGN:
+      if (pointer_type(t1) && !integral_type(t2))
+	 type_op_error ("A pointer can only be assigned an integer.",op);
+      else if (pointer_type(t1) && integral_type(t2))
+      {
+	 warning ("combining integer and pointer.");
+	 break;
+      }
+      else if (!simple_type(t1) || !simple_type(t2))
+	 type_op_error ("Arguments to %s must be of simple type.",op);
+      else if (!same_type(t1,t2))
+	 type_op_error ("Arguments to %s must be of the same type.",op);
+      break;
+
+    case BINOP_CONCAT:
+      /* FIXME:  Needs to handle bitstrings as well. */
+      if (!(string_type(t1) || character_type(t1) || integral_type(t1))
+	  || !(string_type(t2) || character_type(t2) || integral_type(t2)))
+	  type_op_error ("Arguments to %s must be strings or characters.", op);
+      break;
+
+   /* Unary checks -- arg2 is null */
+
+   case UNOP_LOGICAL_NOT:
+      if (!boolean_type(t1))
+	 type_op_error ("Argument to %s must be of boolean type.",op);
+      break;
+
+   case UNOP_PLUS:
+   case UNOP_NEG:
+      if (!numeric_type(t1))
+	 type_op_error ("Argument to %s must be of numeric type.",op);
+      break;
+
+   case UNOP_IND:
+      if (integral_type(t1))
+      {
+	 warning ("combining pointer and integer.\n");
+	 break;
+      }
+      else if (!pointer_type(t1))
+	 type_op_error ("Argument to %s must be a pointer.",op);
+      break;
+
+   case UNOP_PREINCREMENT:
+   case UNOP_POSTINCREMENT:
+   case UNOP_PREDECREMENT:
+   case UNOP_POSTDECREMENT:
+      if (!ordered_type(t1))
+	 type_op_error ("Argument to %s must be of an ordered type.",op);
+      break;
+
+   default:
+      /* Ok.  The following operators have different meanings in
+	 different languages. */
+      switch(current_language->la_language)
+      {
+#ifdef _LANG_c
+      case language_c:
+      case language_cplus:
+	 switch(op)
+	 {
+	 case BINOP_DIV:
+	    if (!numeric_type(t1) || !numeric_type(t2))
+	       type_op_error ("Arguments to %s must be numbers.",op);
+	    break;
+	 }
+	 break;
+#endif
+
+#ifdef _LANG_m2
+      case language_m2:
+	 switch(op)
+	 {
+	 case BINOP_DIV:
+	    if (!float_type(t1) || !float_type(t2))
+	       type_op_error ("Arguments to %s must be floating point numbers.",op);
+	    break;
+	 case BINOP_INTDIV:
+	    if (!integral_type(t1) || !integral_type(t2))
+	       type_op_error ("Arguments to %s must be of integral type.",op);
+	    break;
+	 }
+#endif
+
+#ifdef _LANG_chill
+       case language_chill:
+	 error ("Missing Chill support in function binop_type_check.");/*FIXME*/
+#endif
+
+      }
+   }
+}
+
+#endif	/* 0 */
+
+
+/* This page contains functions for the printing out of
+   error messages that occur during type- and range-
+   checking. */
+
+/* Prints the format string FMT with the operator as a string
+   corresponding to the opcode OP.  If FATAL is non-zero, then
+   this is an error and error () is called.  Otherwise, it is
+   a warning and printf() is called. */
+void
+op_error (fmt,op,fatal)
+   char *fmt;
+   enum exp_opcode op;
+   int fatal;
+{
+   if (fatal)
+      error (fmt,op_string(op));
+   else
+   {
+      warning (fmt,op_string(op));
+   }
+}
+
+/* These are called when a language fails a type- or range-check.
+   The first argument should be a printf()-style format string, and
+   the rest of the arguments should be its arguments.  If
+   [type|range]_check is [type|range]_check_on, then return_to_top_level()
+   is called in the style of error ().  Otherwise, the message is prefixed
+   by the value of warning_pre_print and we do not return to the top level. */
+
+void
+#ifdef ANSI_PROTOTYPES
+type_error (char *string, ...)
+#else
+type_error (va_alist)
+     va_dcl
+#endif
+{
+   va_list args;
+#ifdef ANSI_PROTOTYPES
+   va_start (args, string);
+#else
+   char *string;
+   va_start (args);
+   string = va_arg (args, char *);
+#endif
+
+   if (type_check == type_check_warn)
+     fprintf_filtered (gdb_stderr, warning_pre_print);
+   else
+     error_begin ();
+
+   vfprintf_filtered (gdb_stderr, string, args);
+   fprintf_filtered (gdb_stderr, "\n");
+   va_end (args);
+   if (type_check == type_check_on)
+     return_to_top_level (RETURN_ERROR);
+}
+
+void
+#ifdef ANSI_PROTOTYPES
+range_error (char *string, ...)
+#else
+range_error (va_alist)
+     va_dcl
+#endif
+{
+   va_list args;
+#ifdef ANSI_PROTOTYPES
+   va_start (args, string);
+#else
+   char *string;
+   va_start (args);
+   string = va_arg (args, char *);
+#endif
+
+   if (range_check == range_check_warn)
+     fprintf_filtered (gdb_stderr, warning_pre_print);
+   else
+     error_begin ();
+
+   vfprintf_filtered (gdb_stderr, string, args);
+   fprintf_filtered (gdb_stderr, "\n");
+   va_end (args);
+   if (range_check == range_check_on)
+     return_to_top_level (RETURN_ERROR);
+}
+
+
+/* This page contains miscellaneous functions */
+
+/* Return the language enum for a given language string. */
+
+enum language
+language_enum (str)
+     char *str;
+{
+  int i;
+
+  for (i = 0; i < languages_size; i++) 
+    if (STREQ (languages[i]->la_name, str))
+      return languages[i]->la_language;
+
+  return language_unknown;
+}
+
+/* Return the language struct for a given language enum. */
+
+const struct language_defn *
+language_def(lang)
+   enum language lang;
+{
+  int i;
+
+  for (i = 0; i < languages_size; i++) {
+    if (languages[i]->la_language == lang) {
+      return languages[i];
+    }
+  }
+  return NULL;
+}
+
+/* Return the language as a string */
+char *
+language_str(lang)
+   enum language lang;
+{
+  int i;
+
+  for (i = 0; i < languages_size; i++) {
+    if (languages[i]->la_language == lang) {
+      return languages[i]->la_name;
+    }
+  }
+  return "Unknown";
+}
+
+static void
+set_check (ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   printf_unfiltered(
+"\"set check\" must be followed by the name of a check subcommand.\n");
+   help_list(setchecklist, "set check ", -1, gdb_stdout);
+}
+
+static void
+show_check (ignore, from_tty)
+   char *ignore;
+   int from_tty;
+{
+   cmd_show_list(showchecklist, from_tty, "");
+}
+
+/* Add a language to the set of known languages.  */
+
+void
+add_language (lang)
+     const struct language_defn *lang;
+{
+  if (lang->la_magic != LANG_MAGIC)
+    {
+      fprintf_unfiltered(gdb_stderr, "Magic number of %s language struct wrong\n",
+	lang->la_name);
+      abort();
+    }
+
+  if (!languages)
+    {
+      languages_allocsize = DEFAULT_ALLOCSIZE;
+      languages = (const struct language_defn **) xmalloc
+	(languages_allocsize * sizeof (*languages));
+    }
+  if (languages_size >= languages_allocsize)
+    {
+      languages_allocsize *= 2;
+      languages = (const struct language_defn **) xrealloc ((char *) languages,
+	languages_allocsize * sizeof (*languages));
+    }
+  languages[languages_size++] = lang;
+}
+
+/* Define the language that is no language.  */
+
+static int
+unk_lang_parser ()
+{
+  return 1;
+}
+
+static void
+unk_lang_error (msg)
+     char *msg;
+{
+  error ("Attempted to parse an expression with unknown language");
+}
+
+static void
+unk_lang_emit_char (c, stream, quoter)
+     register int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+  error ("internal error - unimplemented function unk_lang_emit_char called.");
+}
+
+static void
+unk_lang_printchar (c, stream)
+     register int c;
+     GDB_FILE *stream;
+{
+  error ("internal error - unimplemented function unk_lang_printchar called.");
+}
+
+static void
+unk_lang_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  error ("internal error - unimplemented function unk_lang_printstr called.");
+}
+
+static struct type *
+unk_lang_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  error ("internal error - unimplemented function unk_lang_create_fundamental_type called.");
+}
+
+static void
+unk_lang_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  error ("internal error - unimplemented function unk_lang_print_type called.");
+}
+
+static int
+unk_lang_val_print (type, valaddr,  embedded_offset, address, stream, format, deref_ref,
+		    recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  error ("internal error - unimplemented function unk_lang_val_print called.");
+}
+
+static int
+unk_lang_value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  error ("internal error - unimplemented function unk_lang_value_print called.");
+}
+
+static struct type ** CONST_PTR (unknown_builtin_types[]) = { 0 };
+static const struct op_print unk_op_print_tab[] = {
+    {NULL, OP_NULL, PREC_NULL, 0}
+};
+
+const struct language_defn unknown_language_defn = {
+  "unknown",
+  language_unknown,
+  &unknown_builtin_types[0],
+  range_check_off,
+  type_check_off,
+  unk_lang_parser,
+  unk_lang_error,
+  evaluate_subexp_standard,
+  unk_lang_printchar,		/* Print character constant */
+  unk_lang_printstr,
+  unk_lang_emit_char,
+  unk_lang_create_fundamental_type,
+  unk_lang_print_type,		/* Print a type using appropriate syntax */
+  unk_lang_val_print,		/* Print a value using appropriate syntax */
+  unk_lang_value_print,		/* Print a top-level value */
+  {"",      "",    "",   ""},	/* Binary format info */
+  {"0%lo",   "0",   "o",  ""},	/* Octal format info */
+  {"%ld",    "",    "d",  ""},	/* Decimal format info */
+  {"0x%lx",  "0x",  "x",  ""},	/* Hex format info */
+  unk_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+/* These two structs define fake entries for the "local" and "auto" options. */
+const struct language_defn auto_language_defn = {
+  "auto",
+  language_auto,
+  &unknown_builtin_types[0],
+  range_check_off,
+  type_check_off,
+  unk_lang_parser,
+  unk_lang_error,
+  evaluate_subexp_standard,
+  unk_lang_printchar,		/* Print character constant */
+  unk_lang_printstr,
+  unk_lang_emit_char,
+  unk_lang_create_fundamental_type,
+  unk_lang_print_type,		/* Print a type using appropriate syntax */
+  unk_lang_val_print,		/* Print a value using appropriate syntax */
+  unk_lang_value_print,		/* Print a top-level value */
+  {"",      "",    "",   ""},	/* Binary format info */
+  {"0%lo",   "0",   "o",  ""},	/* Octal format info */
+  {"%ld",    "",    "d",  ""},	/* Decimal format info */
+  {"0x%lx",  "0x",  "x",  ""},	/* Hex format info */
+  unk_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+const struct language_defn local_language_defn = {
+  "local",
+  language_auto,
+  &unknown_builtin_types[0],
+  range_check_off,
+  type_check_off,
+  unk_lang_parser,
+  unk_lang_error,
+  evaluate_subexp_standard,
+  unk_lang_printchar,		/* Print character constant */
+  unk_lang_printstr,
+  unk_lang_emit_char,
+  unk_lang_create_fundamental_type,
+  unk_lang_print_type,		/* Print a type using appropriate syntax */
+  unk_lang_val_print,		/* Print a value using appropriate syntax */
+  unk_lang_value_print,		/* Print a top-level value */
+  {"",      "",    "",   ""},	/* Binary format info */
+  {"0%lo",   "0",   "o",  ""},	/* Octal format info */
+  {"%ld",    "",    "d",  ""},	/* Decimal format info */
+  {"0x%lx",  "0x",  "x",  ""},	/* Hex format info */
+  unk_op_print_tab,		/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+/* Initialize the language routines */
+
+void
+_initialize_language()
+{
+   struct cmd_list_element *set, *show;
+
+   /* GDB commands for language specific stuff */
+
+   set = add_set_cmd ("language", class_support, var_string_noescape,
+		      (char *)&language,
+		      "Set the current source language.",
+		      &setlist);
+   show = add_show_from_set (set, &showlist);
+   set->function.cfunc = set_language_command;
+   show->function.cfunc = show_language_command;
+
+   add_prefix_cmd ("check", no_class, set_check,
+		   "Set the status of the type/range checker",
+		   &setchecklist, "set check ", 0, &setlist);
+   add_alias_cmd ("c", "check", no_class, 1, &setlist);
+   add_alias_cmd ("ch", "check", no_class, 1, &setlist);
+
+   add_prefix_cmd ("check", no_class, show_check,
+		   "Show the status of the type/range checker",
+		   &showchecklist, "show check ", 0, &showlist);
+   add_alias_cmd ("c", "check", no_class, 1, &showlist);
+   add_alias_cmd ("ch", "check", no_class, 1, &showlist);
+
+   set = add_set_cmd ("type", class_support, var_string_noescape,
+		      (char *)&type,
+		      "Set type checking.  (on/warn/off/auto)",
+		      &setchecklist);
+   show = add_show_from_set (set, &showchecklist);
+   set->function.cfunc = set_type_command;
+   show->function.cfunc = show_type_command;
+
+   set = add_set_cmd ("range", class_support, var_string_noescape,
+		      (char *)&range,
+		      "Set range checking.  (on/warn/off/auto)",
+		      &setchecklist);
+   show = add_show_from_set (set, &showchecklist);
+   set->function.cfunc = set_range_command;
+   show->function.cfunc = show_range_command;
+
+   add_language (&unknown_language_defn);
+   add_language (&local_language_defn);
+   add_language (&auto_language_defn);
+
+   language = savestring ("auto",strlen("auto"));
+   range = savestring ("auto",strlen("auto"));
+   type = savestring ("auto",strlen("auto"));
+
+   /* Have the above take effect */
+
+   set_language_command (language, 0);
+   set_type_command (NULL, 0);
+   set_range_command (NULL, 0);
+}
diff --git a/gdb/language.h b/gdb/language.h
new file mode 100644
index 0000000..e336869
--- /dev/null
+++ b/gdb/language.h
@@ -0,0 +1,439 @@
+/* Source-language-related definitions for GDB.
+   Copyright 1991, 1992 Free Software Foundation, Inc.
+   Contributed by the Department of Computer Science at the State University
+   of New York at Buffalo.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (LANGUAGE_H)
+#define LANGUAGE_H 1
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct value;
+struct objfile;
+struct expression;
+/* enum exp_opcode;	ANSI's `wisdom' didn't include forward enum decls. */
+#endif
+
+/* This used to be included to configure GDB for one or more specific
+   languages.  Now it is shortcutted to configure for all of them.  FIXME.  */
+/* #include "lang_def.h" */
+#define	_LANG_c
+#define	_LANG_m2
+#define	_LANG_chill
+#define _LANG_fortran
+
+#define MAX_FORTRAN_DIMS  7   /* Maximum number of F77 array dims */ 
+
+/* range_mode ==
+   range_mode_auto:   range_check set automatically to default of language.
+   range_mode_manual: range_check set manually by user.  */
+
+extern enum range_mode {range_mode_auto, range_mode_manual} range_mode;
+
+/* range_check ==
+   range_check_on:    Ranges are checked in GDB expressions, producing errors.
+   range_check_warn:  Ranges are checked, producing warnings.
+   range_check_off:   Ranges are not checked in GDB expressions.  */
+
+extern enum range_check
+  {range_check_off, range_check_warn, range_check_on} range_check;
+
+/* type_mode ==
+   type_mode_auto:   type_check set automatically to default of language
+   type_mode_manual: type_check set manually by user. */
+
+extern enum type_mode {type_mode_auto, type_mode_manual} type_mode;
+
+/* type_check ==
+   type_check_on:    Types are checked in GDB expressions, producing errors.
+   type_check_warn:  Types are checked, producing warnings.
+   type_check_off:   Types are not checked in GDB expressions.  */
+
+extern enum type_check
+  {type_check_off, type_check_warn, type_check_on} type_check;
+
+/* Information for doing language dependent formatting of printed values. */
+
+struct language_format_info
+{
+  /* The format that can be passed directly to standard C printf functions
+     to generate a completely formatted value in the format appropriate for
+     the language. */
+
+  char *la_format;
+
+  /* The prefix to be used when directly printing a value, or constructing
+     a standard C printf format.  This generally is everything up to the
+     conversion specification (the part introduced by the '%' character
+     and terminated by the conversion specifier character). */
+
+  char *la_format_prefix;
+
+  /* The conversion specifier.  This is generally everything after the
+     field width and precision, typically only a single character such
+     as 'o' for octal format or 'x' for hexadecimal format. */
+
+  char *la_format_specifier;
+
+  /* The suffix to be used when directly printing a value, or constructing
+     a standard C printf format.  This generally is everything after the
+     conversion specification (the part introduced by the '%' character
+     and terminated by the conversion specifier character). */
+
+  char *la_format_suffix;		/* Suffix for custom format string */
+};
+
+/* Structure tying together assorted information about a language.  */
+
+struct language_defn
+{
+  /* Name of the language */
+  
+  char *la_name;
+
+  /* its symtab language-enum (defs.h) */
+
+  enum language la_language;
+
+  /* Its builtin types.  This is a vector ended by a NULL pointer.  These
+     types can be specified by name in parsing types in expressions,
+     regardless of whether the program being debugged actually defines
+     such a type.  */
+
+  struct type ** const *la_builtin_type_vector;
+
+  /* Default range checking */
+
+  enum range_check la_range_check;
+
+  /* Default type checking */
+
+  enum type_check la_type_check;
+
+  /* Parser function. */
+  
+  int (*la_parser) PARAMS((void));
+
+  /* Parser error function */
+
+  void (*la_error) PARAMS ((char *));
+
+  /* Evaluate an expression. */
+  struct value * (*evaluate_exp) PARAMS ((struct type *, struct expression *, 
+					  int *, enum noside));
+
+  void (*la_printchar) PARAMS ((int ch, GDB_FILE *stream));
+
+  void (*la_printstr) PARAMS ((GDB_FILE *stream, char *string,
+			       unsigned int length, int width,
+			       int force_ellipses));
+
+  void (*la_emitchar) PARAMS ((int ch, GDB_FILE *stream, int quoter));
+
+  struct type *(*la_fund_type) PARAMS ((struct objfile *, int));
+
+  /* Print a type using syntax appropriate for this language. */
+
+  void (*la_print_type) PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+  /* Print a value using syntax appropriate for this language. */
+
+  int (*la_val_print) PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *,
+			       int, int, int, enum val_prettyprint));
+
+  /* Print a top-level value using syntax appropriate for this language. */
+
+  int (*la_value_print) PARAMS ((struct value *, GDB_FILE *,
+				 int, enum val_prettyprint));
+
+  /* Base 2 (binary) formats. */
+
+  struct language_format_info la_binary_format;
+
+  /* Base 8 (octal) formats. */
+
+  struct language_format_info la_octal_format;
+
+  /* Base 10 (decimal) formats */
+
+  struct language_format_info la_decimal_format;
+
+  /* Base 16 (hexadecimal) formats */
+
+  struct language_format_info la_hex_format;
+
+  /* Table for printing expressions */
+
+  const struct op_print *la_op_print_tab;
+
+  /* Zero if the language has first-class arrays.  True if there are no
+     array values, and array objects decay to pointers, as in C. */
+
+  char c_style_arrays;
+
+  /* Index to use for extracting the first element of a string. */
+  char string_lower_bound;
+
+  /* Type of elements of strings. */
+  struct type **string_char_type;
+
+  /* Add fields above this point, so the magic number is always last. */
+  /* Magic number for compat checking */
+
+  long la_magic;
+
+};
+
+#define LANG_MAGIC	910823L
+
+/* Pointer to the language_defn for our current language.  This pointer
+   always points to *some* valid struct; it can be used without checking
+   it for validity.
+
+   The current language affects expression parsing and evaluation
+   (FIXME: it might be cleaner to make the evaluation-related stuff
+   separate exp_opcodes for each different set of semantics.  We
+   should at least think this through more clearly with respect to
+   what happens if the language is changed between parsing and
+   evaluation) and printing of things like types and arrays.  It does
+   *not* affect symbol-reading-- each source file in a symbol-file has
+   its own language and we should keep track of that regardless of the
+   language when symbols are read.  If we want some manual setting for
+   the language of symbol files (e.g. detecting when ".c" files are
+   C++), it should be a seprate setting from the current_language.  */
+
+extern const struct language_defn *current_language;
+
+/* Pointer to the language_defn expected by the user, e.g. the language
+   of main(), or the language we last mentioned in a message, or C.  */
+
+extern const struct language_defn *expected_language;
+
+/* language_mode == 
+   language_mode_auto:   current_language automatically set upon selection
+			 of scope (e.g. stack frame)
+   language_mode_manual: current_language set only by user.  */
+
+extern enum language_mode
+  {language_mode_auto, language_mode_manual} language_mode;
+
+/* These macros define the behaviour of the expression 
+   evaluator.  */
+
+/* Should we strictly type check expressions? */
+#define STRICT_TYPE (type_check != type_check_off)
+
+/* Should we range check values against the domain of their type? */
+#define RANGE_CHECK (range_check != range_check_off)
+
+/* "cast" really means conversion */
+/* FIXME -- should be a setting in language_defn */
+#define CAST_IS_CONVERSION (current_language->la_language == language_c  || \
+			    current_language->la_language == language_cplus)
+
+extern void
+language_info PARAMS ((int));
+
+extern enum language
+set_language PARAMS ((enum language));
+
+
+/* This page contains functions that return things that are
+   specific to languages.  Each of these functions is based on
+   the current setting of working_lang, which the user sets
+   with the "set language" command. */
+
+#define create_fundamental_type(objfile,typeid) \
+  (current_language->la_fund_type(objfile, typeid))
+
+#define LA_PRINT_TYPE(type,varstring,stream,show,level) \
+  (current_language->la_print_type(type,varstring,stream,show,level))
+
+#define LA_VAL_PRINT(type,valaddr,offset,addr,stream,fmt,deref,recurse,pretty) \
+  (current_language->la_val_print(type,valaddr,offset,addr,stream,fmt,deref, \
+				  recurse,pretty))
+#define LA_VALUE_PRINT(val,stream,fmt,pretty) \
+  (current_language->la_value_print(val,stream,fmt,pretty))
+
+/* Return a format string for printf that will print a number in one of
+   the local (language-specific) formats.  Result is static and is
+   overwritten by the next call.  Takes printf options like "08" or "l"
+   (to produce e.g. %08x or %lx).  */
+
+#define local_binary_format() \
+  (current_language->la_binary_format.la_format)
+#define local_binary_format_prefix() \
+  (current_language->la_binary_format.la_format_prefix)
+#define local_binary_format_specifier() \
+  (current_language->la_binary_format.la_format_specifier)
+#define local_binary_format_suffix() \
+  (current_language->la_binary_format.la_format_suffix)
+
+#define local_octal_format() \
+  (current_language->la_octal_format.la_format)
+#define local_octal_format_prefix() \
+  (current_language->la_octal_format.la_format_prefix)
+#define local_octal_format_specifier() \
+  (current_language->la_octal_format.la_format_specifier)
+#define local_octal_format_suffix() \
+  (current_language->la_octal_format.la_format_suffix)
+
+#define local_decimal_format() \
+  (current_language->la_decimal_format.la_format)
+#define local_decimal_format_prefix() \
+  (current_language->la_decimal_format.la_format_prefix)
+#define local_decimal_format_specifier() \
+  (current_language->la_decimal_format.la_format_specifier)
+#define local_decimal_format_suffix() \
+  (current_language->la_decimal_format.la_format_suffix)
+
+#define local_hex_format() \
+  (current_language->la_hex_format.la_format)
+#define local_hex_format_prefix() \
+  (current_language->la_hex_format.la_format_prefix)
+#define local_hex_format_specifier() \
+  (current_language->la_hex_format.la_format_specifier)
+#define local_hex_format_suffix() \
+  (current_language->la_hex_format.la_format_suffix)
+
+#define LA_PRINT_CHAR(ch, stream) \
+  (current_language->la_printchar(ch, stream))
+#define LA_PRINT_STRING(stream, string, length, width, force_ellipses) \
+  (current_language->la_printstr(stream, string, length, width, force_ellipses))
+#define LA_EMIT_CHAR(ch, stream, quoter) \
+  (current_language->la_emitchar(ch, stream, quoter))
+
+/* Test a character to decide whether it can be printed in literal form
+   or needs to be printed in another representation.  For example,
+   in C the literal form of the character with octal value 141 is 'a'
+   and the "other representation" is '\141'.  The "other representation"
+   is program language dependent. */
+
+#define PRINT_LITERAL_FORM(c)		\
+  ((c) >= 0x20				\
+   && ((c) < 0x7F || (c) >= 0xA0)	\
+   && (!sevenbit_strings || (c) < 0x80))
+
+/* Return a format string for printf that will print a number in one of
+   the local (language-specific) formats.  Result is static and is
+   overwritten by the next call.  Takes printf options like "08" or "l"
+   (to produce e.g. %08x or %lx).  */
+
+extern char *
+local_decimal_format_custom PARAMS ((char *));	/* language.c */
+
+extern char *
+local_octal_format_custom PARAMS ((char *));	/* language.c */
+
+extern char *
+local_hex_format_custom PARAMS ((char *));	/* language.c */
+
+/* Return a string that contains a number formatted in one of the local
+   (language-specific) formats.  Result is static and is overwritten by
+   the next call.  Takes printf options like "08" or "l".  */
+
+extern char *
+local_hex_string PARAMS ((unsigned long));		/* language.c */
+
+extern char *
+local_hex_string_custom PARAMS ((unsigned long, char *)); /* language.c */
+
+/* Type predicates */
+
+extern int
+simple_type PARAMS ((struct type *));
+
+extern int
+ordered_type PARAMS ((struct type *));
+
+extern int
+same_type PARAMS ((struct type *, struct type *));
+
+extern int
+integral_type PARAMS ((struct type *));
+
+extern int
+numeric_type PARAMS ((struct type *));
+
+extern int
+character_type PARAMS ((struct type *));
+
+extern int
+boolean_type PARAMS ((struct type *));
+
+extern int
+float_type PARAMS ((struct type *));
+
+extern int
+pointer_type PARAMS ((struct type *));
+
+extern int
+structured_type PARAMS ((struct type *));
+
+/* Checks Binary and Unary operations for semantic type correctness */
+/* FIXME:  Does not appear to be used */
+#define unop_type_check(v,o) binop_type_check((v),NULL,(o))
+
+extern void
+binop_type_check PARAMS ((struct value *, struct value *, int));
+
+/* Error messages */
+
+extern void
+op_error PARAMS ((char *fmt, enum exp_opcode, int));
+
+#define type_op_error(f,o) \
+   op_error((f),(o),type_check==type_check_on ? 1 : 0)
+#define range_op_error(f,o) \
+   op_error((f),(o),range_check==range_check_on ? 1 : 0)
+
+extern void
+type_error PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+void
+range_error PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+
+/* Data:  Does this value represent "truth" to the current language?  */
+
+extern int
+value_true PARAMS ((struct value *));
+
+extern struct type * lang_bool_type PARAMS ((void));
+
+/* The type used for Boolean values in the current language. */
+#define LA_BOOL_TYPE lang_bool_type ()
+
+/* Misc:  The string representing a particular enum language.  */
+
+extern const struct language_defn *
+language_def PARAMS ((enum language));
+
+extern char *
+language_str PARAMS ((enum language));
+
+/* Add a language to the set known by GDB (at initialization time).  */
+
+extern void
+add_language PARAMS ((const struct language_defn *));
+
+extern enum language
+get_frame_language PARAMS ((void));		/* In stack.c */
+
+#endif	/* defined (LANGUAGE_H) */
diff --git a/gdb/lynx-nat.c b/gdb/lynx-nat.c
new file mode 100644
index 0000000..f006aa4
--- /dev/null
+++ b/gdb/lynx-nat.c
@@ -0,0 +1,837 @@
+/* Native-dependent code for LynxOS.
+   Copyright 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+
+#include <sys/ptrace.h>
+#include <sys/wait.h>
+#include <sys/fpp.h>
+
+static unsigned long registers_addr PARAMS ((int pid));
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR);
+
+#define X(ENTRY)(offsetof(struct econtext, ENTRY))
+
+#ifdef I386
+/* Mappings from tm-i386v.h */
+
+static int regmap[] =
+{
+  X(eax),
+  X(ecx),
+  X(edx),
+  X(ebx),
+  X(esp),			/* sp */
+  X(ebp),			/* fp */
+  X(esi),
+  X(edi),
+  X(eip),			/* pc */
+  X(flags),			/* ps */
+  X(cs),
+  X(ss),
+  X(ds),
+  X(es),
+  X(ecode),			/* Lynx doesn't give us either fs or gs, so */
+  X(fault),			/* we just substitute these two in the hopes
+				   that they are useful. */
+};
+#endif /* I386 */
+
+#ifdef M68K
+/* Mappings from tm-m68k.h */
+
+static int regmap[] =
+{
+  X(regs[0]),			/* d0 */
+  X(regs[1]),			/* d1 */
+  X(regs[2]),			/* d2 */
+  X(regs[3]),			/* d3 */
+  X(regs[4]),			/* d4 */
+  X(regs[5]),			/* d5 */
+  X(regs[6]),			/* d6 */
+  X(regs[7]),			/* d7 */
+  X(regs[8]),			/* a0 */
+  X(regs[9]),			/* a1 */
+  X(regs[10]),			/* a2 */
+  X(regs[11]),			/* a3 */
+  X(regs[12]),			/* a4 */
+  X(regs[13]),			/* a5 */
+  X(regs[14]),			/* fp */
+  offsetof (st_t, usp) - offsetof (st_t, ec), /* sp */
+  X(status),			/* ps */
+  X(pc),
+
+  X(fregs[0*3]),		/* fp0 */
+  X(fregs[1*3]),		/* fp1 */
+  X(fregs[2*3]),		/* fp2 */
+  X(fregs[3*3]),		/* fp3 */
+  X(fregs[4*3]),		/* fp4 */
+  X(fregs[5*3]),		/* fp5 */
+  X(fregs[6*3]),		/* fp6 */
+  X(fregs[7*3]),		/* fp7 */
+
+  X(fcregs[0]),			/* fpcontrol */
+  X(fcregs[1]),			/* fpstatus */
+  X(fcregs[2]),			/* fpiaddr */
+  X(ssw),			/* fpcode */
+  X(fault),			/* fpflags */
+};
+#endif /* M68K */
+
+#ifdef SPARC
+/* Mappings from tm-sparc.h */
+
+#define FX(ENTRY)(offsetof(struct fcontext, ENTRY))
+
+static int regmap[] =
+{
+  -1,				/* g0 */
+  X(g1),
+  X(g2),
+  X(g3),
+  X(g4),
+  -1,				/* g5->g7 aren't saved by Lynx */
+  -1,
+  -1,
+
+  X(o[0]),
+  X(o[1]),
+  X(o[2]),
+  X(o[3]),
+  X(o[4]),
+  X(o[5]),
+  X(o[6]),			/* sp */
+  X(o[7]),			/* ra */
+
+  -1,-1,-1,-1,-1,-1,-1,-1,	/* l0 -> l7 */
+
+  -1,-1,-1,-1,-1,-1,-1,-1,	/* i0 -> i7 */
+
+  FX(f.fregs[0]),		/* f0 */
+  FX(f.fregs[1]),
+  FX(f.fregs[2]),
+  FX(f.fregs[3]),
+  FX(f.fregs[4]),
+  FX(f.fregs[5]),
+  FX(f.fregs[6]),
+  FX(f.fregs[7]),
+  FX(f.fregs[8]),
+  FX(f.fregs[9]),
+  FX(f.fregs[10]),
+  FX(f.fregs[11]),
+  FX(f.fregs[12]),
+  FX(f.fregs[13]),
+  FX(f.fregs[14]),
+  FX(f.fregs[15]),
+  FX(f.fregs[16]),
+  FX(f.fregs[17]),
+  FX(f.fregs[18]),
+  FX(f.fregs[19]),
+  FX(f.fregs[20]),
+  FX(f.fregs[21]),
+  FX(f.fregs[22]),
+  FX(f.fregs[23]),
+  FX(f.fregs[24]),
+  FX(f.fregs[25]),
+  FX(f.fregs[26]),
+  FX(f.fregs[27]),
+  FX(f.fregs[28]),
+  FX(f.fregs[29]),
+  FX(f.fregs[30]),
+  FX(f.fregs[31]),
+
+  X(y),
+  X(psr),
+  X(wim),
+  X(tbr),
+  X(pc),
+  X(npc),
+  FX(fsr),			/* fpsr */
+  -1,				/* cpsr */
+};
+#endif /* SPARC */
+
+#ifdef rs6000
+
+static int regmap[] =
+{
+  X(iregs[0]),			/* r0 */
+  X(iregs[1]),
+  X(iregs[2]),
+  X(iregs[3]),
+  X(iregs[4]),
+  X(iregs[5]),
+  X(iregs[6]),
+  X(iregs[7]),
+  X(iregs[8]),
+  X(iregs[9]),
+  X(iregs[10]),
+  X(iregs[11]),
+  X(iregs[12]),
+  X(iregs[13]),
+  X(iregs[14]),
+  X(iregs[15]),
+  X(iregs[16]),
+  X(iregs[17]),
+  X(iregs[18]),
+  X(iregs[19]),
+  X(iregs[20]),
+  X(iregs[21]),
+  X(iregs[22]),
+  X(iregs[23]),
+  X(iregs[24]),
+  X(iregs[25]),
+  X(iregs[26]),
+  X(iregs[27]),
+  X(iregs[28]),
+  X(iregs[29]),
+  X(iregs[30]),
+  X(iregs[31]),
+
+  X(fregs[0]),			/* f0 */
+  X(fregs[1]),
+  X(fregs[2]),
+  X(fregs[3]),
+  X(fregs[4]),
+  X(fregs[5]),
+  X(fregs[6]),
+  X(fregs[7]),
+  X(fregs[8]),
+  X(fregs[9]),
+  X(fregs[10]),
+  X(fregs[11]),
+  X(fregs[12]),
+  X(fregs[13]),
+  X(fregs[14]),
+  X(fregs[15]),
+  X(fregs[16]),
+  X(fregs[17]),
+  X(fregs[18]),
+  X(fregs[19]),
+  X(fregs[20]),
+  X(fregs[21]),
+  X(fregs[22]),
+  X(fregs[23]),
+  X(fregs[24]),
+  X(fregs[25]),
+  X(fregs[26]),
+  X(fregs[27]),
+  X(fregs[28]),
+  X(fregs[29]),
+  X(fregs[30]),
+  X(fregs[31]),
+
+  X(srr0),			/* IAR (PC) */
+  X(srr1),			/* MSR (PS) */
+  X(cr),			/* CR */
+  X(lr),			/* LR */
+  X(ctr),			/* CTR */
+  X(xer),			/* XER */
+  X(mq)				/* MQ */
+};
+
+#endif /* rs6000 */
+
+#ifdef SPARC
+
+/* This routine handles some oddball cases for Sparc registers and LynxOS.
+   In partucular, it causes refs to G0, g5->7, and all fp regs to return zero.
+   It also handles knows where to find the I & L regs on the stack.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  int whatregs = 0;
+
+#define WHATREGS_FLOAT 1
+#define WHATREGS_GEN 2
+#define WHATREGS_STACK 4
+
+  if (regno == -1)
+    whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
+  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+    whatregs = WHATREGS_STACK;
+  else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
+    whatregs = WHATREGS_FLOAT;
+  else
+    whatregs = WHATREGS_GEN;
+
+  if (whatregs & WHATREGS_GEN)
+    {
+      struct econtext ec;		/* general regs */
+      char buf[MAX_REGISTER_RAW_SIZE];
+      int retval;
+      int i;
+
+      errno = 0;
+      retval = ptrace (PTRACE_GETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
+		       0);
+      if (errno)
+	perror_with_name ("ptrace(PTRACE_GETREGS)");
+  
+      memset (buf, 0, REGISTER_RAW_SIZE (G0_REGNUM));
+      supply_register (G0_REGNUM, buf);
+      supply_register (TBR_REGNUM, (char *)&ec.tbr);
+
+      memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &ec.g1,
+	      4 * REGISTER_RAW_SIZE (G1_REGNUM));
+      for (i = G1_REGNUM; i <= G1_REGNUM + 3; i++)
+	register_valid[i] = 1;
+
+      supply_register (PS_REGNUM, (char *)&ec.psr);
+      supply_register (Y_REGNUM, (char *)&ec.y);
+      supply_register (PC_REGNUM, (char *)&ec.pc);
+      supply_register (NPC_REGNUM, (char *)&ec.npc);
+      supply_register (WIM_REGNUM, (char *)&ec.wim);
+
+      memcpy (&registers[REGISTER_BYTE (O0_REGNUM)], ec.o,
+	      8 * REGISTER_RAW_SIZE (O0_REGNUM));
+      for (i = O0_REGNUM; i <= O0_REGNUM + 7; i++)
+	register_valid[i] = 1;
+    }
+
+  if (whatregs & WHATREGS_STACK)
+    {
+      CORE_ADDR sp;
+      int i;
+
+      sp = read_register (SP_REGNUM);
+
+      target_xfer_memory (sp + FRAME_SAVED_I0,
+			  &registers[REGISTER_BYTE(I0_REGNUM)],
+			  8 * REGISTER_RAW_SIZE (I0_REGNUM), 0);
+      for (i = I0_REGNUM; i <= I7_REGNUM; i++)
+	register_valid[i] = 1;
+
+      target_xfer_memory (sp + FRAME_SAVED_L0,
+			  &registers[REGISTER_BYTE(L0_REGNUM)],
+			  8 * REGISTER_RAW_SIZE (L0_REGNUM), 0);
+      for (i = L0_REGNUM; i <= L0_REGNUM + 7; i++)
+	register_valid[i] = 1;
+    }
+
+  if (whatregs & WHATREGS_FLOAT)
+    {
+      struct fcontext fc;		/* fp regs */
+      int retval;
+      int i;
+
+      errno = 0;
+      retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("ptrace(PTRACE_GETFPREGS)");
+  
+      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fc.f.fregs,
+	      32 * REGISTER_RAW_SIZE (FP0_REGNUM));
+      for (i = FP0_REGNUM; i <= FP0_REGNUM + 31; i++)
+	register_valid[i] = 1;
+
+      supply_register (FPS_REGNUM, (char *)&fc.fsr);
+    }
+}
+
+/* This routine handles storing of the I & L regs for the Sparc.  The trick
+   here is that they actually live on the stack.  The really tricky part is
+   that when changing the stack pointer, the I & L regs must be written to
+   where the new SP points, otherwise the regs will be incorrect when the
+   process is started up again.   We assume that the I & L regs are valid at
+   this point.  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  int whatregs = 0;
+
+  if (regno == -1)
+    whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
+  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+    whatregs = WHATREGS_STACK;
+  else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
+    whatregs = WHATREGS_FLOAT;
+  else if (regno == SP_REGNUM)
+    whatregs = WHATREGS_STACK | WHATREGS_GEN;
+  else
+    whatregs = WHATREGS_GEN;
+
+  if (whatregs & WHATREGS_GEN)
+    {
+      struct econtext ec;		/* general regs */
+      int retval;
+
+      ec.tbr = read_register (TBR_REGNUM);
+      memcpy (&ec.g1, &registers[REGISTER_BYTE (G1_REGNUM)],
+	      4 * REGISTER_RAW_SIZE (G1_REGNUM));
+
+      ec.psr = read_register (PS_REGNUM);
+      ec.y = read_register (Y_REGNUM);
+      ec.pc = read_register (PC_REGNUM);
+      ec.npc = read_register (NPC_REGNUM);
+      ec.wim = read_register (WIM_REGNUM);
+
+      memcpy (ec.o, &registers[REGISTER_BYTE (O0_REGNUM)],
+	      8 * REGISTER_RAW_SIZE (O0_REGNUM));
+
+      errno = 0;
+      retval = ptrace (PTRACE_SETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
+		       0);
+      if (errno)
+	perror_with_name ("ptrace(PTRACE_SETREGS)");
+    }
+
+  if (whatregs & WHATREGS_STACK)
+    {
+      int regoffset;
+      CORE_ADDR sp;
+
+      sp = read_register (SP_REGNUM);
+
+      if (regno == -1 || regno == SP_REGNUM)
+	{
+	  if (!register_valid[L0_REGNUM+5])
+	    abort();
+	  target_xfer_memory (sp + FRAME_SAVED_I0,
+			      &registers[REGISTER_BYTE (I0_REGNUM)],
+			      8 * REGISTER_RAW_SIZE (I0_REGNUM), 1);
+
+	  target_xfer_memory (sp + FRAME_SAVED_L0,
+			      &registers[REGISTER_BYTE (L0_REGNUM)],
+			      8 * REGISTER_RAW_SIZE (L0_REGNUM), 1);
+	}
+      else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+	{
+	  if (!register_valid[regno])
+	    abort();
+	  if (regno >= L0_REGNUM && regno <= L0_REGNUM + 7)
+	    regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM)
+	      + FRAME_SAVED_L0;
+	  else
+	    regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (I0_REGNUM)
+	      + FRAME_SAVED_I0;
+	  target_xfer_memory (sp + regoffset, &registers[REGISTER_BYTE (regno)],
+			      REGISTER_RAW_SIZE (regno), 1);
+	}
+    }
+
+  if (whatregs & WHATREGS_FLOAT)
+    {
+      struct fcontext fc;		/* fp regs */
+      int retval;
+
+/* We read fcontext first so that we can get good values for fq_t... */
+      errno = 0;
+      retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("ptrace(PTRACE_GETFPREGS)");
+  
+      memcpy (fc.f.fregs, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	      32 * REGISTER_RAW_SIZE (FP0_REGNUM));
+
+      fc.fsr = read_register (FPS_REGNUM);
+
+      errno = 0;
+      retval = ptrace (PTRACE_SETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
+		       0);
+      if (errno)
+	perror_with_name ("ptrace(PTRACE_SETFPREGS)");
+      }
+}
+#endif /* SPARC */
+
+#if defined (I386) || defined (M68K) || defined (rs6000)
+
+/* Return the offset relative to the start of the per-thread data to the
+   saved context block.  */
+
+static unsigned long
+registers_addr(pid)
+     int pid;
+{
+  CORE_ADDR stblock;
+  int ecpoff = offsetof(st_t, ecp);
+  CORE_ADDR ecp;
+
+  errno = 0;
+  stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, pid, (PTRACE_ARG3_TYPE)0,
+				0);
+  if (errno)
+    perror_with_name ("ptrace(PTRACE_THREADUSER)");
+
+  ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, pid, (PTRACE_ARG3_TYPE)ecpoff,
+			    0);
+  if (errno)
+    perror_with_name ("ptrace(PTRACE_PEEKTHREAD)");
+
+  return ecp - stblock;
+}
+
+/* Fetch one or more registers from the inferior.  REGNO == -1 to get
+   them all.  We actually fetch more than requested, when convenient,
+   marking them as valid so we won't fetch them again.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  int reglo, reghi;
+  int i;
+  unsigned long ecp;
+
+  if (regno == -1)
+    {
+      reglo = 0;
+      reghi = NUM_REGS - 1;
+    }
+  else
+    reglo = reghi = regno;
+
+  ecp = registers_addr (inferior_pid);
+
+  for (regno = reglo; regno <= reghi; regno++)
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+      int ptrace_fun = PTRACE_PEEKTHREAD;
+
+#ifdef M68K
+      ptrace_fun = regno == SP_REGNUM ? PTRACE_PEEKUSP : PTRACE_PEEKTHREAD;
+#endif
+
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+	{
+	  unsigned int reg;
+
+	  errno = 0;
+	  reg = ptrace (ptrace_fun, inferior_pid,
+			(PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), 0);
+	  if (errno)
+	    perror_with_name ("ptrace(PTRACE_PEEKUSP)");
+  
+	  *(int *)&buf[i] = reg;
+	}
+      supply_register (regno, buf);
+    }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+/* Registers we shouldn't try to store.  */
+#if !defined (CANNOT_STORE_REGISTER)
+#define CANNOT_STORE_REGISTER(regno) 0
+#endif
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  int reglo, reghi;
+  int i;
+  unsigned long ecp;
+
+  if (regno == -1)
+    {
+      reglo = 0;
+      reghi = NUM_REGS - 1;
+    }
+  else
+    reglo = reghi = regno;
+
+  ecp = registers_addr (inferior_pid);
+
+  for (regno = reglo; regno <= reghi; regno++)
+    {
+      int ptrace_fun = PTRACE_POKEUSER;
+
+      if (CANNOT_STORE_REGISTER (regno))
+	continue;
+
+#ifdef M68K
+      ptrace_fun = regno == SP_REGNUM ? PTRACE_POKEUSP : PTRACE_POKEUSER;
+#endif
+
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+	{
+	  unsigned int reg;
+
+	  reg = *(unsigned int *)&registers[REGISTER_BYTE (regno) + i];
+
+	  errno = 0;
+	  ptrace (ptrace_fun, inferior_pid,
+		  (PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), reg);
+	  if (errno)
+	    perror_with_name ("ptrace(PTRACE_POKEUSP)");
+	}
+    }
+}
+#endif /* defined (I386) || defined (M68K) || defined (rs6000) */
+
+/* Wait for child to do something.  Return pid of child, or -1 in case
+   of error; store status through argument pointer OURSTATUS.  */
+
+int
+child_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  int save_errno;
+  int thread;
+  union wait status;
+
+  while (1)
+    {
+      int sig;
+
+      set_sigint_trap();	/* Causes SIGINT to be passed on to the
+				   attached process. */
+      pid = wait (&status);
+
+      save_errno = errno;
+
+      clear_sigint_trap();
+
+      if (pid == -1)
+	{
+	  if (save_errno == EINTR)
+	    continue;
+	  fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
+		   safe_strerror (save_errno));
+	  /* Claim it exited with unknown signal.  */
+	  ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+	  ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+	  return -1;
+	}
+
+      if (pid != PIDGET (inferior_pid))	/* Some other process?!? */
+	continue;
+
+      thread = status.w_tid;	/* Get thread id from status */
+
+      /* Initial thread value can only be acquired via wait, so we have to
+	 resort to this hack.  */
+
+      if (TIDGET (inferior_pid) == 0 && thread != 0)
+	{
+	  inferior_pid = BUILDPID (inferior_pid, thread);
+	  add_thread (inferior_pid);
+	}
+
+      pid = BUILDPID (pid, thread);
+
+      /* We've become a single threaded process again.  */
+      if (thread == 0)
+	inferior_pid = pid;
+
+      /* Check for thread creation.  */
+      if (WIFSTOPPED(status)
+	  && WSTOPSIG(status) == SIGTRAP
+	  && !in_thread_list (pid))
+	{
+	  int realsig;
+
+	  realsig = ptrace (PTRACE_GETTRACESIG, pid, (PTRACE_ARG3_TYPE)0, 0);
+
+	  if (realsig == SIGNEWTHREAD)
+	    {
+	      /* It's a new thread notification.  We don't want to much with
+		 realsig -- the code in wait_for_inferior expects SIGTRAP. */
+	      ourstatus->kind = TARGET_WAITKIND_SPURIOUS;
+	      ourstatus->value.sig = TARGET_SIGNAL_0;
+	      return pid;
+	    }
+	  else
+	    error ("Signal for unknown thread was not SIGNEWTHREAD");
+	}
+
+      /* Check for thread termination.  */
+      else if (WIFSTOPPED(status)
+	       && WSTOPSIG(status) == SIGTRAP
+	       && in_thread_list (pid))
+	{
+	  int realsig;
+
+	  realsig = ptrace (PTRACE_GETTRACESIG, pid, (PTRACE_ARG3_TYPE)0, 0);
+
+	  if (realsig == SIGTHREADEXIT)
+	    {
+	      ptrace (PTRACE_CONT, PIDGET (pid), (PTRACE_ARG3_TYPE)0, 0);
+	      continue;
+	    }
+	}
+
+#ifdef SPARC
+      /* SPARC Lynx uses an byte reversed wait status; we must use the
+	 host macros to access it.  These lines just a copy of
+	 store_waitstatus.  We can't use CHILD_SPECIAL_WAITSTATUS
+	 because target.c can't include the Lynx <sys/wait.h>.  */
+      if (WIFEXITED (status))
+	{
+	  ourstatus->kind = TARGET_WAITKIND_EXITED;
+	  ourstatus->value.integer = WEXITSTATUS (status);
+	}
+      else if (!WIFSTOPPED (status))
+	{
+	  ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+	  ourstatus->value.sig =
+	    target_signal_from_host (WTERMSIG (status));
+	}
+      else
+	{
+	  ourstatus->kind = TARGET_WAITKIND_STOPPED;
+	  ourstatus->value.sig =
+	    target_signal_from_host (WSTOPSIG (status));
+	}
+#else
+      store_waitstatus (ourstatus, status.w_status);
+#endif
+
+      return pid;
+    }
+}
+
+/* Return nonzero if the given thread is still alive.  */
+int
+child_thread_alive (pid)
+     int pid;
+{
+  /* Arggh.  Apparently pthread_kill only works for threads within
+     the process that calls pthread_kill.
+
+     We want to avoid the lynx signal extensions as they simply don't
+     map well to the generic gdb interface we want to keep.
+
+     All we want to do is determine if a particular thread is alive;
+     it appears as if we can just make a harmless thread specific
+     ptrace call to do that.  */
+  return (ptrace (PTRACE_THREADUSER, pid, 0, 0) != -1);
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+child_resume (pid, step, signal)
+     int pid;
+     int step;
+     enum target_signal signal;
+{
+  int func;
+
+  errno = 0;
+
+  /* If pid == -1, then we want to step/continue all threads, else
+     we only want to step/continue a single thread.  */
+  if (pid == -1)
+    {
+      pid = inferior_pid;
+      func = step ? PTRACE_SINGLESTEP : PTRACE_CONT;
+    }
+  else
+    func = step ? PTRACE_SINGLESTEP_ONE : PTRACE_CONT_ONE;
+
+
+  /* An address of (PTRACE_ARG3_TYPE)1 tells ptrace to continue from where
+     it was.  (If GDB wanted it to start some other way, we have already
+     written a new PC value to the child.)
+
+     If this system does not support PT_STEP, a higher level function will
+     have called single_step() to transmute the step request into a
+     continue request (by setting breakpoints on all possible successor
+     instructions), so we don't have to worry about that here.  */
+
+  ptrace (func, pid, (PTRACE_ARG3_TYPE) 1, target_signal_to_host (signal));
+
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+/* Convert a Lynx process ID to a string.  Returns the string in a static
+   buffer.  */
+
+char *
+lynx_pid_to_str (pid)
+     int pid;
+{
+  static char buf[40];
+
+  sprintf (buf, "process %d thread %d", PIDGET (pid), TIDGET (pid));
+
+  return buf;
+}
+
+/* Extract the register values out of the core file and store
+   them where `read_register' will find them.
+
+   CORE_REG_SECT points to the register values themselves, read into memory.
+   CORE_REG_SIZE is the size of that area.
+   WHICH says which set of registers we are handling (0 = int, 2 = float
+         on machines where they are discontiguous).
+   REG_ADDR is the offset from u.u_ar0 to the register values relative to
+            core_reg_sect.  This is used with old-fashioned core files to
+	    locate the registers in a large upage-plus-stack ".reg" section.
+	    Original upage address X is at location core_reg_sect+x+reg_addr.
+ */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;
+{
+  struct st_entry s;
+  unsigned int regno;
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    if (regmap[regno] != -1)
+      supply_register (regno, core_reg_sect + offsetof (st_t, ec)
+		       + regmap[regno]);
+
+#ifdef SPARC
+/* Fetching this register causes all of the I & L regs to be read from the
+   stack and validated.  */
+
+  fetch_inferior_registers (I0_REGNUM);
+#endif
+}
+
+
+/* Register that we are able to handle lynx core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns lynx_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_lynx ()
+{
+  add_core_fns (&lynx_core_fns);
+}
diff --git a/gdb/m2-exp.y b/gdb/m2-exp.y
new file mode 100644
index 0000000..507e5bc
--- /dev/null
+++ b/gdb/m2-exp.y
@@ -0,0 +1,1094 @@
+/* YACC grammar for Modula-2 expressions, for GDB.
+   Copyright (C) 1986, 1989, 1990, 1991, 1993, 1994, 1995
+   Free Software Foundation, Inc.
+   Generated from expread.y (now c-exp.y) and contributed by the Department
+   of Computer Science at the State University of New York at Buffalo, 1991.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parse a Modula-2 expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.
+
+   Note that malloc's and realloc's in this file are transformed to
+   xmalloc and xrealloc respectively by the same sed command in the
+   makefile that remaps any other malloc/realloc inserted by the parser
+   generator.  Doing this with #defines and trying to control the interaction
+   with include files (<malloc.h> and <stdlib.h> for example) just became
+   too messy, particularly when such includes can be inserted at random
+   times by the parser generator. */
+   
+%{
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "expression.h"
+#include "language.h"
+#include "value.h"
+#include "parser-defs.h"
+#include "m2-lang.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h" /* For have_full_symbols and have_partial_symbols */
+
+/* Remap normal yacc parser interface names (yyparse, yylex, yyerror, etc),
+   as well as gratuitiously global symbol names, so we can have multiple
+   yacc generated parsers in gdb.  Note that these are only the variables
+   produced by yacc.  If other parser generators (bison, byacc, etc) produce
+   additional global names that conflict at link time, then those parser
+   generators need to be fixed instead of adding those names to this list. */
+
+#define	yymaxdepth m2_maxdepth
+#define	yyparse	m2_parse
+#define	yylex	m2_lex
+#define	yyerror	m2_error
+#define	yylval	m2_lval
+#define	yychar	m2_char
+#define	yydebug	m2_debug
+#define	yypact	m2_pact
+#define	yyr1	m2_r1
+#define	yyr2	m2_r2
+#define	yydef	m2_def
+#define	yychk	m2_chk
+#define	yypgo	m2_pgo
+#define	yyact	m2_act
+#define	yyexca	m2_exca
+#define	yyerrflag m2_errflag
+#define	yynerrs	m2_nerrs
+#define	yyps	m2_ps
+#define	yypv	m2_pv
+#define	yys	m2_s
+#define	yy_yys	m2_yys
+#define	yystate	m2_state
+#define	yytmp	m2_tmp
+#define	yyv	m2_v
+#define	yy_yyv	m2_yyv
+#define	yyval	m2_val
+#define	yylloc	m2_lloc
+#define	yyreds	m2_reds		/* With YYDEBUG defined */
+#define	yytoks	m2_toks		/* With YYDEBUG defined */
+#define yylhs	m2_yylhs
+#define yylen	m2_yylen
+#define yydefred m2_yydefred
+#define yydgoto	m2_yydgoto
+#define yysindex m2_yysindex
+#define yyrindex m2_yyrindex
+#define yygindex m2_yygindex
+#define yytable	 m2_yytable
+#define yycheck	 m2_yycheck
+
+#ifndef YYDEBUG
+#define	YYDEBUG	0		/* Default to no yydebug support */
+#endif
+
+int
+yyparse PARAMS ((void));
+
+static int
+yylex PARAMS ((void));
+
+void
+yyerror PARAMS ((char *));
+
+#if 0
+static char *
+make_qualname PARAMS ((char *, char *));
+#endif
+
+static int
+parse_number PARAMS ((int));
+
+/* The sign of the number being parsed. */
+static int number_sign = 1;
+
+/* The block that the module specified by the qualifer on an identifer is
+   contained in, */
+#if 0
+static struct block *modblock=0;
+#endif
+
+%}
+
+/* Although the yacc "value" of an expression is not used,
+   since the result is stored in the structure being created,
+   other node types do have values.  */
+
+%union
+  {
+    LONGEST lval;
+    ULONGEST ulval;
+    DOUBLEST dval;
+    struct symbol *sym;
+    struct type *tval;
+    struct stoken sval;
+    int voidval;
+    struct block *bval;
+    enum exp_opcode opcode;
+    struct internalvar *ivar;
+
+    struct type **tvec;
+    int *ivec;
+  }
+
+%type <voidval> exp type_exp start set
+%type <voidval> variable
+%type <tval> type
+%type <bval> block 
+%type <sym> fblock 
+
+%token <lval> INT HEX ERROR
+%token <ulval> UINT M2_TRUE M2_FALSE CHAR
+%token <dval> FLOAT
+
+/* Both NAME and TYPENAME tokens represent symbols in the input,
+   and both convey their data as strings.
+   But a TYPENAME is a string that happens to be defined as a typedef
+   or builtin type name (such as int or char)
+   and a NAME is any other symbol.
+
+   Contexts where this distinction is not important can use the
+   nonterminal "name", which matches either NAME or TYPENAME.  */
+
+%token <sval> STRING
+%token <sval> NAME BLOCKNAME IDENT VARNAME
+%token <sval> TYPENAME
+
+%token SIZE CAP ORD HIGH ABS MIN_FUNC MAX_FUNC FLOAT_FUNC VAL CHR ODD TRUNC
+%token INC DEC INCL EXCL
+
+/* The GDB scope operator */
+%token COLONCOLON
+
+%token <voidval> INTERNAL_VAR
+
+/* M2 tokens */
+%left ','
+%left ABOVE_COMMA
+%nonassoc ASSIGN
+%left '<' '>' LEQ GEQ '=' NOTEQUAL '#' IN
+%left OROR
+%left LOGICAL_AND '&'
+%left '@'
+%left '+' '-'
+%left '*' '/' DIV MOD
+%right UNARY
+%right '^' DOT '[' '('
+%right NOT '~'
+%left COLONCOLON QID
+/* This is not an actual token ; it is used for precedence. 
+%right QID
+*/
+
+
+%%
+
+start   :	exp
+	|	type_exp
+	;
+
+type_exp:	type
+		{ write_exp_elt_opcode(OP_TYPE);
+		  write_exp_elt_type($1);
+		  write_exp_elt_opcode(OP_TYPE);
+		}
+	;
+
+/* Expressions */
+
+exp     :       exp '^'   %prec UNARY
+                        { write_exp_elt_opcode (UNOP_IND); }
+
+exp	:	'-'
+			{ number_sign = -1; }
+		exp    %prec UNARY
+			{ number_sign = 1;
+			  write_exp_elt_opcode (UNOP_NEG); }
+	;
+
+exp	:	'+' exp    %prec UNARY
+		{ write_exp_elt_opcode(UNOP_PLUS); }
+	;
+
+exp	:	not_exp exp %prec UNARY
+			{ write_exp_elt_opcode (UNOP_LOGICAL_NOT); }
+	;
+
+not_exp	:	NOT
+	|	'~'
+	;
+
+exp	:	CAP '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_CAP); }
+	;
+
+exp	:	ORD '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_ORD); }
+	;
+
+exp	:	ABS '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_ABS); }
+	;
+
+exp	: 	HIGH '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_HIGH); }
+	;
+
+exp 	:	MIN_FUNC '(' type ')'
+			{ write_exp_elt_opcode (UNOP_MIN);
+			  write_exp_elt_type ($3);
+			  write_exp_elt_opcode (UNOP_MIN); }
+	;
+
+exp	: 	MAX_FUNC '(' type ')'
+			{ write_exp_elt_opcode (UNOP_MAX);
+			  write_exp_elt_type ($3);
+			  write_exp_elt_opcode (UNOP_MIN); }
+	;
+
+exp	:	FLOAT_FUNC '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_FLOAT); }
+	;
+
+exp	:	VAL '(' type ',' exp ')'
+			{ write_exp_elt_opcode (BINOP_VAL);
+			  write_exp_elt_type ($3);
+			  write_exp_elt_opcode (BINOP_VAL); }
+	;
+
+exp	:	CHR '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_CHR); }
+	;
+
+exp	:	ODD '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_ODD); }
+	;
+
+exp	:	TRUNC '(' exp ')'
+			{ write_exp_elt_opcode (UNOP_TRUNC); }
+	;
+
+exp	:	SIZE exp       %prec UNARY
+			{ write_exp_elt_opcode (UNOP_SIZEOF); }
+	;
+
+
+exp	:	INC '(' exp ')'
+			{ write_exp_elt_opcode(UNOP_PREINCREMENT); }
+	;
+
+exp	:	INC '(' exp ',' exp ')'
+			{ write_exp_elt_opcode(BINOP_ASSIGN_MODIFY);
+			  write_exp_elt_opcode(BINOP_ADD);
+			  write_exp_elt_opcode(BINOP_ASSIGN_MODIFY); }
+	;
+
+exp	:	DEC '(' exp ')'
+			{ write_exp_elt_opcode(UNOP_PREDECREMENT);}
+	;
+
+exp	:	DEC '(' exp ',' exp ')'
+			{ write_exp_elt_opcode(BINOP_ASSIGN_MODIFY);
+			  write_exp_elt_opcode(BINOP_SUB);
+			  write_exp_elt_opcode(BINOP_ASSIGN_MODIFY); }
+	;
+
+exp	:	exp DOT NAME
+			{ write_exp_elt_opcode (STRUCTOP_STRUCT);
+			  write_exp_string ($3);
+			  write_exp_elt_opcode (STRUCTOP_STRUCT); }
+	;
+
+exp	:	set
+	;
+
+exp	:	exp IN set
+			{ error("Sets are not implemented.");}
+	;
+
+exp	:	INCL '(' exp ',' exp ')'
+			{ error("Sets are not implemented.");}
+	;
+
+exp	:	EXCL '(' exp ',' exp ')'
+			{ error("Sets are not implemented.");}
+
+set	:	'{' arglist '}'
+			{ error("Sets are not implemented.");}
+	|	type '{' arglist '}'
+			{ error("Sets are not implemented.");}
+	;
+
+
+/* Modula-2 array subscript notation [a,b,c...] */
+exp     :       exp '['
+                        /* This function just saves the number of arguments
+			   that follow in the list.  It is *not* specific to
+			   function types */
+                        { start_arglist(); }
+                non_empty_arglist ']'  %prec DOT
+                        { write_exp_elt_opcode (MULTI_SUBSCRIPT);
+			  write_exp_elt_longcst ((LONGEST) end_arglist());
+			  write_exp_elt_opcode (MULTI_SUBSCRIPT); }
+        ;
+
+exp	:	exp '('
+			/* This is to save the value of arglist_len
+			   being accumulated by an outer function call.  */
+			{ start_arglist (); }
+		arglist ')'	%prec DOT
+			{ write_exp_elt_opcode (OP_FUNCALL);
+			  write_exp_elt_longcst ((LONGEST) end_arglist ());
+			  write_exp_elt_opcode (OP_FUNCALL); }
+	;
+
+arglist	:
+	;
+
+arglist	:	exp
+			{ arglist_len = 1; }
+	;
+
+arglist	:	arglist ',' exp   %prec ABOVE_COMMA
+			{ arglist_len++; }
+	;
+
+non_empty_arglist
+        :       exp
+                        { arglist_len = 1; }
+	;
+
+non_empty_arglist
+        :       non_empty_arglist ',' exp %prec ABOVE_COMMA
+     	       	    	{ arglist_len++; }
+     	;
+
+/* GDB construct */
+exp	:	'{' type '}' exp  %prec UNARY
+			{ write_exp_elt_opcode (UNOP_MEMVAL);
+			  write_exp_elt_type ($2);
+			  write_exp_elt_opcode (UNOP_MEMVAL); }
+	;
+
+exp     :       type '(' exp ')' %prec UNARY
+                        { write_exp_elt_opcode (UNOP_CAST);
+			  write_exp_elt_type ($1);
+			  write_exp_elt_opcode (UNOP_CAST); }
+	;
+
+exp	:	'(' exp ')'
+			{ }
+	;
+
+/* Binary operators in order of decreasing precedence.  Note that some
+   of these operators are overloaded!  (ie. sets) */
+
+/* GDB construct */
+exp	:	exp '@' exp
+			{ write_exp_elt_opcode (BINOP_REPEAT); }
+	;
+
+exp	:	exp '*' exp
+			{ write_exp_elt_opcode (BINOP_MUL); }
+	;
+
+exp	:	exp '/' exp
+			{ write_exp_elt_opcode (BINOP_DIV); }
+	;
+
+exp     :       exp DIV exp
+                        { write_exp_elt_opcode (BINOP_INTDIV); }
+        ;
+
+exp	:	exp MOD exp
+			{ write_exp_elt_opcode (BINOP_REM); }
+	;
+
+exp	:	exp '+' exp
+			{ write_exp_elt_opcode (BINOP_ADD); }
+	;
+
+exp	:	exp '-' exp
+			{ write_exp_elt_opcode (BINOP_SUB); }
+	;
+
+exp	:	exp '=' exp
+			{ write_exp_elt_opcode (BINOP_EQUAL); }
+	;
+
+exp	:	exp NOTEQUAL exp
+			{ write_exp_elt_opcode (BINOP_NOTEQUAL); }
+        |       exp '#' exp
+                        { write_exp_elt_opcode (BINOP_NOTEQUAL); }
+	;
+
+exp	:	exp LEQ exp
+			{ write_exp_elt_opcode (BINOP_LEQ); }
+	;
+
+exp	:	exp GEQ exp
+			{ write_exp_elt_opcode (BINOP_GEQ); }
+	;
+
+exp	:	exp '<' exp
+			{ write_exp_elt_opcode (BINOP_LESS); }
+	;
+
+exp	:	exp '>' exp
+			{ write_exp_elt_opcode (BINOP_GTR); }
+	;
+
+exp	:	exp LOGICAL_AND exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_AND); }
+	;
+
+exp	:	exp OROR exp
+			{ write_exp_elt_opcode (BINOP_LOGICAL_OR); }
+	;
+
+exp	:	exp ASSIGN exp
+			{ write_exp_elt_opcode (BINOP_ASSIGN); }
+	;
+
+
+/* Constants */
+
+exp	:	M2_TRUE
+			{ write_exp_elt_opcode (OP_BOOL);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_BOOL); }
+	;
+
+exp	:	M2_FALSE
+			{ write_exp_elt_opcode (OP_BOOL);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_BOOL); }
+	;
+
+exp	:	INT
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_m2_int);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	UINT
+			{
+			  write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_m2_card);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_LONG);
+			}
+	;
+
+exp	:	CHAR
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_m2_char);
+			  write_exp_elt_longcst ((LONGEST) $1);
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+
+exp	:	FLOAT
+			{ write_exp_elt_opcode (OP_DOUBLE);
+			  write_exp_elt_type (builtin_type_m2_real);
+			  write_exp_elt_dblcst ($1);
+			  write_exp_elt_opcode (OP_DOUBLE); }
+	;
+
+exp	:	variable
+	;
+
+exp	:	SIZE '(' type ')'	%prec UNARY
+			{ write_exp_elt_opcode (OP_LONG);
+			  write_exp_elt_type (builtin_type_int);
+			  write_exp_elt_longcst ((LONGEST) TYPE_LENGTH ($3));
+			  write_exp_elt_opcode (OP_LONG); }
+	;
+
+exp	:	STRING
+			{ write_exp_elt_opcode (OP_M2_STRING);
+			  write_exp_string ($1);
+			  write_exp_elt_opcode (OP_M2_STRING); }
+	;
+
+/* This will be used for extensions later.  Like adding modules. */
+block	:	fblock	
+			{ $$ = SYMBOL_BLOCK_VALUE($1); }
+	;
+
+fblock	:	BLOCKNAME
+			{ struct symbol *sym
+			    = lookup_symbol (copy_name ($1), expression_context_block,
+					     VAR_NAMESPACE, 0, NULL);
+			  $$ = sym;}
+	;
+			     
+
+/* GDB scope operator */
+fblock	:	block COLONCOLON BLOCKNAME
+			{ struct symbol *tem
+			    = lookup_symbol (copy_name ($3), $1,
+					     VAR_NAMESPACE, 0, NULL);
+			  if (!tem || SYMBOL_CLASS (tem) != LOC_BLOCK)
+			    error ("No function \"%s\" in specified context.",
+				   copy_name ($3));
+			  $$ = tem;
+			}
+	;
+
+/* Useful for assigning to PROCEDURE variables */
+variable:	fblock
+			{ write_exp_elt_opcode(OP_VAR_VALUE);
+			  write_exp_elt_block (NULL);
+			  write_exp_elt_sym ($1);
+			  write_exp_elt_opcode (OP_VAR_VALUE); }
+	;
+
+/* GDB internal ($foo) variable */
+variable:	INTERNAL_VAR
+	;
+
+/* GDB scope operator */
+variable:	block COLONCOLON NAME
+			{ struct symbol *sym;
+			  sym = lookup_symbol (copy_name ($3), $1,
+					       VAR_NAMESPACE, 0, NULL);
+			  if (sym == 0)
+			    error ("No symbol \"%s\" in specified context.",
+				   copy_name ($3));
+
+			  write_exp_elt_opcode (OP_VAR_VALUE);
+			  /* block_found is set by lookup_symbol.  */
+			  write_exp_elt_block (block_found);
+			  write_exp_elt_sym (sym);
+			  write_exp_elt_opcode (OP_VAR_VALUE); }
+	;
+
+/* Base case for variables. */
+variable:	NAME
+			{ struct symbol *sym;
+			  int is_a_field_of_this;
+
+ 			  sym = lookup_symbol (copy_name ($1),
+					       expression_context_block,
+					       VAR_NAMESPACE,
+					       &is_a_field_of_this,
+					       NULL);
+			  if (sym)
+			    {
+			      if (symbol_read_needs_frame (sym))
+				{
+				  if (innermost_block == 0 ||
+				      contained_in (block_found, 
+						    innermost_block))
+				    innermost_block = block_found;
+				}
+
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			      /* We want to use the selected frame, not
+				 another more inner frame which happens to
+				 be in the same block.  */
+			      write_exp_elt_block (NULL);
+			      write_exp_elt_sym (sym);
+			      write_exp_elt_opcode (OP_VAR_VALUE);
+			    }
+			  else
+			    {
+			      struct minimal_symbol *msymbol;
+			      register char *arg = copy_name ($1);
+
+			      msymbol =
+				lookup_minimal_symbol (arg, NULL, NULL);
+			      if (msymbol != NULL)
+				{
+				  write_exp_msymbol
+				    (msymbol,
+				     lookup_function_type (builtin_type_int),
+				     builtin_type_int);
+				}
+			      else if (!have_full_symbols () && !have_partial_symbols ())
+				error ("No symbol table is loaded.  Use the \"symbol-file\" command.");
+			      else
+				error ("No symbol \"%s\" in current context.",
+				       copy_name ($1));
+			    }
+			}
+	;
+
+type
+	:	TYPENAME
+			{ $$ = lookup_typename (copy_name ($1),
+						expression_context_block, 0); }
+
+	;
+
+%%
+
+#if 0  /* FIXME! */
+int
+overflow(a,b)
+   long a,b;
+{
+   return (MAX_OF_TYPE(builtin_type_m2_int) - b) < a;
+}
+
+int
+uoverflow(a,b)
+   unsigned long a,b;
+{
+   return (MAX_OF_TYPE(builtin_type_m2_card) - b) < a;
+}
+#endif /* FIXME */
+
+/* Take care of parsing a number (anything that starts with a digit).
+   Set yylval and return the token type; update lexptr.
+   LEN is the number of characters in it.  */
+
+/*** Needs some error checking for the float case ***/
+
+static int
+parse_number (olen)
+     int olen;
+{
+  register char *p = lexptr;
+  register LONGEST n = 0;
+  register LONGEST prevn = 0;
+  register int c,i,ischar=0;
+  register int base = input_radix;
+  register int len = olen;
+  int unsigned_p = number_sign == 1 ? 1 : 0;
+
+  if(p[len-1] == 'H')
+  {
+     base = 16;
+     len--;
+  }
+  else if(p[len-1] == 'C' || p[len-1] == 'B')
+  {
+     base = 8;
+     ischar = p[len-1] == 'C';
+     len--;
+  }
+
+  /* Scan the number */
+  for (c = 0; c < len; c++)
+  {
+    if (p[c] == '.' && base == 10)
+      {
+	/* It's a float since it contains a point.  */
+	yylval.dval = atof (p);
+	lexptr += len;
+	return FLOAT;
+      }
+    if (p[c] == '.' && base != 10)
+       error("Floating point numbers must be base 10.");
+    if (base == 10 && (p[c] < '0' || p[c] > '9'))
+       error("Invalid digit \'%c\' in number.",p[c]);
+ }
+
+  while (len-- > 0)
+    {
+      c = *p++;
+      n *= base;
+      if( base == 8 && (c == '8' || c == '9'))
+	 error("Invalid digit \'%c\' in octal number.",c);
+      if (c >= '0' && c <= '9')
+	i = c - '0';
+      else
+	{
+	  if (base == 16 && c >= 'A' && c <= 'F')
+	    i = c - 'A' + 10;
+	  else
+	     return ERROR;
+	}
+      n+=i;
+      if(i >= base)
+	 return ERROR;
+      if(!unsigned_p && number_sign == 1 && (prevn >= n))
+	 unsigned_p=1;		/* Try something unsigned */
+      /* Don't do the range check if n==i and i==0, since that special
+	 case will give an overflow error. */
+      if(RANGE_CHECK && n!=i && i)
+      {
+	 if((unsigned_p && (unsigned)prevn >= (unsigned)n) ||
+	    ((!unsigned_p && number_sign==-1) && -prevn <= -n))
+	    range_error("Overflow on numeric constant.");
+      }
+	 prevn=n;
+    }
+
+  lexptr = p;
+  if(*p == 'B' || *p == 'C' || *p == 'H')
+     lexptr++;			/* Advance past B,C or H */
+
+  if (ischar)
+  {
+     yylval.ulval = n;
+     return CHAR;
+  }
+  else if ( unsigned_p && number_sign == 1)
+  {
+     yylval.ulval = n;
+     return UINT;
+  }
+  else if((unsigned_p && (n<0))) {
+     range_error("Overflow on numeric constant -- number too large.");
+     /* But, this can return if range_check == range_warn.  */
+  }
+  yylval.lval = n;
+  return INT;
+}
+
+
+/* Some tokens */
+
+static struct
+{
+   char name[2];
+   int token;
+} tokentab2[] =
+{
+    { {'<', '>'},    NOTEQUAL 	},
+    { {':', '='},    ASSIGN	},
+    { {'<', '='},    LEQ	},
+    { {'>', '='},    GEQ	},
+    { {':', ':'},    COLONCOLON },
+
+};
+
+/* Some specific keywords */
+
+struct keyword {
+   char keyw[10];
+   int token;
+};
+
+static struct keyword keytab[] =
+{
+    {"OR" ,   OROR	 },
+    {"IN",    IN         },/* Note space after IN */
+    {"AND",   LOGICAL_AND},
+    {"ABS",   ABS	 },
+    {"CHR",   CHR	 },
+    {"DEC",   DEC	 },
+    {"NOT",   NOT	 },
+    {"DIV",   DIV    	 },
+    {"INC",   INC	 },
+    {"MAX",   MAX_FUNC	 },
+    {"MIN",   MIN_FUNC	 },
+    {"MOD",   MOD	 },
+    {"ODD",   ODD	 },
+    {"CAP",   CAP	 },
+    {"ORD",   ORD	 },
+    {"VAL",   VAL	 },
+    {"EXCL",  EXCL	 },
+    {"HIGH",  HIGH       },
+    {"INCL",  INCL	 },
+    {"SIZE",  SIZE       },
+    {"FLOAT", FLOAT_FUNC },
+    {"TRUNC", TRUNC	 },
+};
+
+
+/* Read one token, getting characters through lexptr.  */
+
+/* This is where we will check to make sure that the language and the operators used are
+   compatible  */
+
+static int
+yylex ()
+{
+  register int c;
+  register int namelen;
+  register int i;
+  register char *tokstart;
+  register char quote;
+
+ retry:
+
+  tokstart = lexptr;
+
+
+  /* See if it is a special token of length 2 */
+  for( i = 0 ; i < (int) (sizeof tokentab2 / sizeof tokentab2[0]) ; i++)
+     if(STREQN(tokentab2[i].name, tokstart, 2))
+     {
+	lexptr += 2;
+	return tokentab2[i].token;
+     }
+
+  switch (c = *tokstart)
+    {
+    case 0:
+      return 0;
+
+    case ' ':
+    case '\t':
+    case '\n':
+      lexptr++;
+      goto retry;
+
+    case '(':
+      paren_depth++;
+      lexptr++;
+      return c;
+
+    case ')':
+      if (paren_depth == 0)
+	return 0;
+      paren_depth--;
+      lexptr++;
+      return c;
+
+    case ',':
+      if (comma_terminates && paren_depth == 0)
+	return 0;
+      lexptr++;
+      return c;
+
+    case '.':
+      /* Might be a floating point number.  */
+      if (lexptr[1] >= '0' && lexptr[1] <= '9')
+	break;			/* Falls into number code.  */
+      else
+      {
+	 lexptr++;
+	 return DOT;
+      }
+
+/* These are character tokens that appear as-is in the YACC grammar */
+    case '+':
+    case '-':
+    case '*':
+    case '/':
+    case '^':
+    case '<':
+    case '>':
+    case '[':
+    case ']':
+    case '=':
+    case '{':
+    case '}':
+    case '#':
+    case '@':
+    case '~':
+    case '&':
+      lexptr++;
+      return c;
+
+    case '\'' :
+    case '"':
+      quote = c;
+      for (namelen = 1; (c = tokstart[namelen]) != quote && c != '\0'; namelen++)
+	if (c == '\\')
+	  {
+	    c = tokstart[++namelen];
+	    if (c >= '0' && c <= '9')
+	      {
+		c = tokstart[++namelen];
+		if (c >= '0' && c <= '9')
+		  c = tokstart[++namelen];
+	      }
+	  }
+      if(c != quote)
+	 error("Unterminated string or character constant.");
+      yylval.sval.ptr = tokstart + 1;
+      yylval.sval.length = namelen - 1;
+      lexptr += namelen + 1;
+
+      if(namelen == 2)  	/* Single character */
+      {
+	   yylval.ulval = tokstart[1];
+	   return CHAR;
+      }
+      else
+	 return STRING;
+    }
+
+  /* Is it a number?  */
+  /* Note:  We have already dealt with the case of the token '.'.
+     See case '.' above.  */
+  if ((c >= '0' && c <= '9'))
+    {
+      /* It's a number.  */
+      int got_dot = 0, got_e = 0;
+      register char *p = tokstart;
+      int toktype;
+
+      for (++p ;; ++p)
+	{
+	  if (!got_e && (*p == 'e' || *p == 'E'))
+	    got_dot = got_e = 1;
+	  else if (!got_dot && *p == '.')
+	    got_dot = 1;
+	  else if (got_e && (p[-1] == 'e' || p[-1] == 'E')
+		   && (*p == '-' || *p == '+'))
+	    /* This is the sign of the exponent, not the end of the
+	       number.  */
+	    continue;
+	  else if ((*p < '0' || *p > '9') &&
+		   (*p < 'A' || *p > 'F') &&
+		   (*p != 'H'))  /* Modula-2 hexadecimal number */
+	    break;
+	}
+	toktype = parse_number (p - tokstart);
+        if (toktype == ERROR)
+	  {
+	    char *err_copy = (char *) alloca (p - tokstart + 1);
+
+	    memcpy (err_copy, tokstart, p - tokstart);
+	    err_copy[p - tokstart] = 0;
+	    error ("Invalid number \"%s\".", err_copy);
+	  }
+	lexptr = p;
+	return toktype;
+    }
+
+  if (!(c == '_' || c == '$'
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')))
+    /* We must have come across a bad character (e.g. ';').  */
+    error ("Invalid character '%c' in expression.", c);
+
+  /* It's a name.  See how long it is.  */
+  namelen = 0;
+  for (c = tokstart[namelen];
+       (c == '_' || c == '$' || (c >= '0' && c <= '9')
+	|| (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z'));
+       c = tokstart[++namelen])
+    ;
+
+  /* The token "if" terminates the expression and is NOT
+     removed from the input stream.  */
+  if (namelen == 2 && tokstart[0] == 'i' && tokstart[1] == 'f')
+    {
+      return 0;
+    }
+
+  lexptr += namelen;
+
+  /*  Lookup special keywords */
+  for(i = 0 ; i < (int) (sizeof(keytab) / sizeof(keytab[0])) ; i++)
+     if(namelen == strlen(keytab[i].keyw) && STREQN(tokstart,keytab[i].keyw,namelen))
+	   return keytab[i].token;
+
+  yylval.sval.ptr = tokstart;
+  yylval.sval.length = namelen;
+
+  if (*tokstart == '$')
+    {
+      write_dollar_variable (yylval.sval);
+      return INTERNAL_VAR;
+    }
+
+  /* Use token-type BLOCKNAME for symbols that happen to be defined as
+     functions.  If this is not so, then ...
+     Use token-type TYPENAME for symbols that happen to be defined
+     currently as names of types; NAME for other symbols.
+     The caller is not constrained to care about the distinction.  */
+ {
+
+
+    char *tmp = copy_name (yylval.sval);
+    struct symbol *sym;
+
+    if (lookup_partial_symtab (tmp))
+      return BLOCKNAME;
+    sym = lookup_symbol (tmp, expression_context_block,
+			 VAR_NAMESPACE, 0, NULL);
+    if (sym && SYMBOL_CLASS (sym) == LOC_BLOCK)
+      return BLOCKNAME;
+    if (lookup_typename (copy_name (yylval.sval), expression_context_block, 1))
+      return TYPENAME;
+
+    if(sym)
+    {
+       switch(sym->aclass)
+       {
+       case LOC_STATIC:
+       case LOC_REGISTER:
+       case LOC_ARG:
+       case LOC_REF_ARG:
+       case LOC_REGPARM:
+       case LOC_REGPARM_ADDR:
+       case LOC_LOCAL:
+       case LOC_LOCAL_ARG:
+       case LOC_BASEREG:
+       case LOC_BASEREG_ARG:
+       case LOC_CONST:
+       case LOC_CONST_BYTES:
+       case LOC_OPTIMIZED_OUT:
+	  return NAME;
+
+       case LOC_TYPEDEF:
+	  return TYPENAME;
+
+       case LOC_BLOCK:
+	  return BLOCKNAME;
+
+       case LOC_UNDEF:
+	  error("internal:  Undefined class in m2lex()");
+
+       case LOC_LABEL:
+       case LOC_UNRESOLVED:
+	  error("internal:  Unforseen case in m2lex()");
+       }
+    }
+    else
+    {
+       /* Built-in BOOLEAN type.  This is sort of a hack. */
+       if(STREQN(tokstart,"TRUE",4))
+       {
+	  yylval.ulval = 1;
+	  return M2_TRUE;
+       }
+       else if(STREQN(tokstart,"FALSE",5))
+       {
+	  yylval.ulval = 0;
+	  return M2_FALSE;
+       }
+    }
+
+    /* Must be another type of name... */
+    return NAME;
+ }
+}
+
+#if 0		/* Unused */
+static char *
+make_qualname(mod,ident)
+   char *mod, *ident;
+{
+   char *new = malloc(strlen(mod)+strlen(ident)+2);
+
+   strcpy(new,mod);
+   strcat(new,".");
+   strcat(new,ident);
+   return new;
+}
+#endif  /* 0 */
+
+void
+yyerror (msg)
+     char *msg;
+{
+  error ("A %s in expression, near `%s'.", (msg ? msg : "error"), lexptr);
+}
diff --git a/gdb/m2-lang.c b/gdb/m2-lang.c
new file mode 100644
index 0000000..f5f38a9
--- /dev/null
+++ b/gdb/m2-lang.c
@@ -0,0 +1,472 @@
+/* Modula 2 language support routines for GDB, the GNU debugger.
+   Copyright 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "m2-lang.h"
+#include "c-lang.h"
+
+static struct type *m2_create_fundamental_type PARAMS ((struct objfile *, int));
+static void m2_printstr PARAMS ((GDB_FILE *stream, char *string, unsigned int length, int width, int force_ellipses));
+static void m2_printchar PARAMS ((int, GDB_FILE *));
+static void m2_emit_char PARAMS ((int, GDB_FILE *, int));
+
+/* Print the character C on STREAM as part of the contents of a literal
+   string whose delimiter is QUOTER.  Note that that format for printing
+   characters and strings is language specific.
+   FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true Modula version.
+ */
+
+static void
+m2_emit_char (c, stream, quoter)
+     register int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+
+  c &= 0xFF;			/* Avoid sign bit follies */
+
+  if (PRINT_LITERAL_FORM (c))
+    {
+      if (c == '\\' || c == quoter)
+	{
+	  fputs_filtered ("\\", stream);
+	}
+      fprintf_filtered (stream, "%c", c);
+    }
+  else
+    {
+      switch (c)
+	{
+	case '\n':
+	  fputs_filtered ("\\n", stream);
+	  break;
+	case '\b':
+	  fputs_filtered ("\\b", stream);
+	  break;
+	case '\t':
+	  fputs_filtered ("\\t", stream);
+	  break;
+	case '\f':
+	  fputs_filtered ("\\f", stream);
+	  break;
+	case '\r':
+	  fputs_filtered ("\\r", stream);
+	  break;
+	case '\033':
+	  fputs_filtered ("\\e", stream);
+	  break;
+	case '\007':
+	  fputs_filtered ("\\a", stream);
+	  break;
+	default:
+	  fprintf_filtered (stream, "\\%.3o", (unsigned int) c);
+	  break;
+	}
+    }
+}
+
+/* FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true Modula version. */
+
+static void
+m2_printchar (c, stream)
+     int c;
+     GDB_FILE *stream;
+{
+  fputs_filtered ("'", stream);
+  LA_EMIT_CHAR (c, stream, '\'');
+  fputs_filtered ("'", stream);
+}
+
+/* Print the character string STRING, printing at most LENGTH characters.
+   Printing stops early if the number hits print_max; repeat counts
+   are printed as appropriate.  Print ellipses at the end if we
+   had to stop before printing LENGTH characters, or if FORCE_ELLIPSES.
+   FIXME:  This is a copy of the same function from c-exp.y.  It should
+   be replaced with a true Modula version. */
+
+static void
+m2_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  register unsigned int i;
+  unsigned int things_printed = 0;
+  int in_quotes = 0;
+  int need_comma = 0;
+  extern int inspect_it;
+  extern int repeat_count_threshold;
+  extern int print_max;
+
+  if (length == 0)
+    {
+      fputs_filtered ("\"\"", gdb_stdout);
+      return;
+    }
+
+  for (i = 0; i < length && things_printed < print_max; ++i)
+    {
+      /* Position of the character we are examining
+	 to see whether it is repeated.  */
+      unsigned int rep1;
+      /* Number of repetitions we have detected so far.  */
+      unsigned int reps;
+
+      QUIT;
+
+      if (need_comma)
+	{
+	  fputs_filtered (", ", stream);
+	  need_comma = 0;
+	}
+
+      rep1 = i + 1;
+      reps = 1;
+      while (rep1 < length && string[rep1] == string[i])
+	{
+	  ++rep1;
+	  ++reps;
+	}
+
+      if (reps > repeat_count_threshold)
+	{
+	  if (in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\\", ", stream);
+	      else
+		fputs_filtered ("\", ", stream);
+	      in_quotes = 0;
+	    }
+	  m2_printchar (string[i], stream);
+	  fprintf_filtered (stream, " <repeats %u times>", reps);
+	  i = rep1 - 1;
+	  things_printed += repeat_count_threshold;
+	  need_comma = 1;
+	}
+      else
+	{
+	  if (!in_quotes)
+	    {
+	      if (inspect_it)
+		fputs_filtered ("\\\"", stream);
+	      else
+		fputs_filtered ("\"", stream);
+	      in_quotes = 1;
+	    }
+	  LA_EMIT_CHAR (string[i], stream, '"');
+	  ++things_printed;
+	}
+    }
+
+  /* Terminate the quotes if necessary.  */
+  if (in_quotes)
+    {
+      if (inspect_it)
+	fputs_filtered ("\\\"", stream);
+      else
+	fputs_filtered ("\"", stream);
+    }
+
+  if (force_ellipses || i < length)
+    fputs_filtered ("...", stream);
+}
+
+/* FIXME:  This is a copy of c_create_fundamental_type(), before
+   all the non-C types were stripped from it.  Needs to be fixed
+   by an experienced Modula programmer. */
+
+static struct type *
+m2_create_fundamental_type (objfile, typeid)
+     struct objfile *objfile;
+     int typeid;
+{
+  register struct type *type = NULL;
+
+  switch (typeid)
+    {
+      default:
+	/* FIXME:  For now, if we are asked to produce a type not in this
+	   language, create the equivalent of a C integer type with the
+	   name "<?type?>".  When all the dust settles from the type
+	   reconstruction work, this should probably become an error. */
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "<?type?>", objfile);
+        warning ("internal error: no Modula fundamental type %d", typeid);
+	break;
+      case FT_VOID:
+	type = init_type (TYPE_CODE_VOID,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "void", objfile);
+	break;
+      case FT_BOOLEAN:
+	type = init_type (TYPE_CODE_BOOL,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "boolean", objfile);
+	break;
+      case FT_STRING:
+	type = init_type (TYPE_CODE_STRING,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "string", objfile);
+	break;
+      case FT_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "char", objfile);
+	break;
+      case FT_SIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  0, "signed char", objfile);
+	break;
+      case FT_UNSIGNED_CHAR:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned char", objfile);
+	break;
+      case FT_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  0, "short", objfile);
+	break;
+      case FT_SIGNED_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  0, "short", objfile);	/* FIXME-fnf */
+	break;
+      case FT_UNSIGNED_SHORT:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_SHORT_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned short", objfile);
+	break;
+      case FT_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "int", objfile);
+	break;
+      case FT_SIGNED_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "int", objfile); /* FIXME -fnf */
+	break;
+      case FT_UNSIGNED_INTEGER:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned int", objfile);
+	break;
+      case FT_FIXED_DECIMAL:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_INT_BIT / TARGET_CHAR_BIT,
+			  0, "fixed decimal", objfile);
+	break;
+      case FT_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long", objfile);
+	break;
+      case FT_SIGNED_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long", objfile); /* FIXME -fnf */
+	break;
+      case FT_UNSIGNED_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned long", objfile);
+	break;
+      case FT_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "long long", objfile);
+	break;
+      case FT_SIGNED_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  0, "signed long long", objfile);
+	break;
+      case FT_UNSIGNED_LONG_LONG:
+	type = init_type (TYPE_CODE_INT,
+			  TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT,
+			  TYPE_FLAG_UNSIGNED, "unsigned long long", objfile);
+	break;
+      case FT_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+			  0, "float", objfile);
+	break;
+      case FT_DBL_PREC_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "double", objfile);
+	break;
+      case FT_FLOAT_DECIMAL:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "floating decimal", objfile);
+	break;
+      case FT_EXT_PREC_FLOAT:
+	type = init_type (TYPE_CODE_FLT,
+			  TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "long double", objfile);
+	break;
+      case FT_COMPLEX:
+	type = init_type (TYPE_CODE_COMPLEX,
+			  2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+			  0, "complex", objfile);
+	TYPE_TARGET_TYPE (type)
+	  = m2_create_fundamental_type (objfile, FT_FLOAT);
+	break;
+      case FT_DBL_PREC_COMPLEX:
+	type = init_type (TYPE_CODE_COMPLEX,
+			  2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "double complex", objfile);
+	TYPE_TARGET_TYPE (type)
+	  = m2_create_fundamental_type (objfile, FT_DBL_PREC_FLOAT);
+	break;
+      case FT_EXT_PREC_COMPLEX:
+	type = init_type (TYPE_CODE_COMPLEX,
+			  2 * TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT,
+			  0, "long double complex", objfile);
+	TYPE_TARGET_TYPE (type)
+	  = m2_create_fundamental_type (objfile, FT_EXT_PREC_FLOAT);
+	break;
+      }
+  return (type);
+}
+
+
+/* Table of operators and their precedences for printing expressions.  */
+
+static const struct op_print m2_op_print_tab[] = {
+    {"+",   BINOP_ADD, PREC_ADD, 0},
+    {"+",   UNOP_PLUS, PREC_PREFIX, 0},
+    {"-",   BINOP_SUB, PREC_ADD, 0},
+    {"-",   UNOP_NEG, PREC_PREFIX, 0},
+    {"*",   BINOP_MUL, PREC_MUL, 0},
+    {"/",   BINOP_DIV, PREC_MUL, 0},
+    {"DIV", BINOP_INTDIV, PREC_MUL, 0},
+    {"MOD", BINOP_REM, PREC_MUL, 0},
+    {":=",  BINOP_ASSIGN, PREC_ASSIGN, 1},
+    {"OR",  BINOP_LOGICAL_OR, PREC_LOGICAL_OR, 0},
+    {"AND", BINOP_LOGICAL_AND, PREC_LOGICAL_AND, 0},
+    {"NOT", UNOP_LOGICAL_NOT, PREC_PREFIX, 0},
+    {"=",   BINOP_EQUAL, PREC_EQUAL, 0},
+    {"<>",  BINOP_NOTEQUAL, PREC_EQUAL, 0},
+    {"<=",  BINOP_LEQ, PREC_ORDER, 0},
+    {">=",  BINOP_GEQ, PREC_ORDER, 0},
+    {">",   BINOP_GTR, PREC_ORDER, 0},
+    {"<",   BINOP_LESS, PREC_ORDER, 0},
+    {"^",   UNOP_IND, PREC_PREFIX, 0},
+    {"@",   BINOP_REPEAT, PREC_REPEAT, 0},
+    {"CAP", UNOP_CAP, PREC_BUILTIN_FUNCTION, 0},
+    {"CHR", UNOP_CHR, PREC_BUILTIN_FUNCTION, 0},
+    {"ORD", UNOP_ORD, PREC_BUILTIN_FUNCTION, 0},
+    {"FLOAT",UNOP_FLOAT, PREC_BUILTIN_FUNCTION, 0},
+    {"HIGH", UNOP_HIGH, PREC_BUILTIN_FUNCTION, 0},
+    {"MAX", UNOP_MAX, PREC_BUILTIN_FUNCTION, 0},
+    {"MIN", UNOP_MIN, PREC_BUILTIN_FUNCTION, 0},
+    {"ODD", UNOP_ODD, PREC_BUILTIN_FUNCTION, 0},
+    {"TRUNC", UNOP_TRUNC, PREC_BUILTIN_FUNCTION, 0},
+    {NULL,  0, 0, 0}
+};
+
+/* The built-in types of Modula-2.  */
+
+struct type *builtin_type_m2_char;
+struct type *builtin_type_m2_int;
+struct type *builtin_type_m2_card;
+struct type *builtin_type_m2_real;
+struct type *builtin_type_m2_bool;
+
+struct type ** CONST_PTR (m2_builtin_types[]) = 
+{
+  &builtin_type_m2_char,
+  &builtin_type_m2_int,
+  &builtin_type_m2_card,
+  &builtin_type_m2_real,
+  &builtin_type_m2_bool,
+  0
+};
+
+const struct language_defn m2_language_defn = {
+  "modula-2",
+  language_m2,
+  m2_builtin_types,
+  range_check_on,
+  type_check_on,
+  m2_parse,			/* parser */
+  m2_error,			/* parser error function */
+  evaluate_subexp_standard,
+  m2_printchar,			/* Print character constant */
+  m2_printstr,			/* function to print string constant */
+  m2_emit_char,			/* Function to print a single character */
+  m2_create_fundamental_type,	/* Create fundamental type in this language */
+  m2_print_type,		/* Print a type using appropriate syntax */
+  m2_val_print,			/* Print a value using appropriate syntax */
+  c_value_print,		/* Print a top-level value */
+  {"",      "",   "",   ""},	/* Binary format info */
+  {"%loB",   "",   "o",  "B"},	/* Octal format info */
+  {"%ld",    "",   "d",  ""},	/* Decimal format info */
+  {"0%lXH",  "0",  "X",  "H"},	/* Hex format info */
+  m2_op_print_tab,		/* expression operators for printing */
+  0,				/* arrays are first-class (not c-style) */
+  0,				/* String lower bound */
+  &builtin_type_m2_char,	/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+/* Initialization for Modula-2 */
+
+void
+_initialize_m2_language ()
+{
+  /* Modula-2 "pervasive" types.  NOTE:  these can be redefined!!! */
+  builtin_type_m2_int =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "INTEGER", (struct objfile *) NULL);
+  builtin_type_m2_card =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "CARDINAL", (struct objfile *) NULL);
+  builtin_type_m2_real =
+    init_type (TYPE_CODE_FLT, TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "REAL", (struct objfile *) NULL);
+  builtin_type_m2_char =
+    init_type (TYPE_CODE_CHAR, TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "CHAR", (struct objfile *) NULL);
+  builtin_type_m2_bool =
+    init_type (TYPE_CODE_BOOL, TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       TYPE_FLAG_UNSIGNED,
+	       "BOOLEAN", (struct objfile *) NULL);
+
+  add_language (&m2_language_defn);
+}
diff --git a/gdb/m2-lang.h b/gdb/m2-lang.h
new file mode 100644
index 0000000..dc627b7
--- /dev/null
+++ b/gdb/m2-lang.h
@@ -0,0 +1,31 @@
+/* Modula 2 language support definitions for GDB, the GNU debugger.
+   Copyright 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+extern int
+m2_parse PARAMS ((void));	/* Defined in m2-exp.y */
+
+extern void
+m2_error PARAMS ((char *));	/* Defined in m2-exp.y */
+
+extern void			/* Defined in m2-typeprint.c */
+m2_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+extern int
+m2_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *, int, int,
+		      int, enum val_prettyprint));
diff --git a/gdb/m2-typeprint.c b/gdb/m2-typeprint.c
new file mode 100644
index 0000000..317f401
--- /dev/null
+++ b/gdb/m2-typeprint.c
@@ -0,0 +1,49 @@
+/* Support for printing Modula 2 types for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bfd.h"		/* Binary File Description */
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "demangle.h"
+#include "m2-lang.h"
+
+#include "gdb_string.h"
+#include <errno.h>
+
+void
+m2_print_type (type, varstring, stream, show, level)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+     int level;
+{
+  extern void c_print_type PARAMS ((struct type *, char *, GDB_FILE *, int, int));
+
+  c_print_type (type, varstring, stream, show, level);	/* FIXME */
+}
diff --git a/gdb/m2-valprint.c b/gdb/m2-valprint.c
new file mode 100644
index 0000000..12a2f27
--- /dev/null
+++ b/gdb/m2-valprint.c
@@ -0,0 +1,47 @@
+/* Support for printing Modula 2 values for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "valprint.h"
+#include "m2-lang.h"
+
+/* FIXME:  For now, just explicitly declare c_val_print and use it instead */
+
+int
+m2_val_print (type, valaddr, embedded_offset, address,
+              stream, format, deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  extern int
+  c_val_print PARAMS ((struct type *, char *, int, CORE_ADDR,
+                       GDB_FILE *, int, int, int, enum val_prettyprint));
+  return (c_val_print (type, valaddr, 0, address, stream, format, deref_ref,
+		       recurse, pretty));
+}
diff --git a/gdb/m3-nat.c b/gdb/m3-nat.c
new file mode 100644
index 0000000..4614f65
--- /dev/null
+++ b/gdb/m3-nat.c
@@ -0,0 +1,4646 @@
+/* Interface GDB to Mach 3.0 operating systems.
+   (Most) Mach 3.0 related routines live in this file.
+
+   Copyright (C) 1992, 1996, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Author: Jukka Virtanen <jtv@hut.fi>
+ *	   Computing Centre
+ *         Helsinki University of Technology
+ *         Finland
+ *
+ * Thanks to my friends who helped with ideas and testing:
+ *
+ *	Johannes Helander, Antti Louko, Tero Mononen,
+ *	jvh@cs.hut.fi	   alo@hut.fi   tmo@cs.hut.fi
+ *
+ *      Tero Kivinen       and          Eamonn McManus
+ *	kivinen@cs.hut.fi               emcmanus@gr.osf.org
+ *	
+ */
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <servers/netname.h>
+#include <servers/machid.h>
+#include <mach/message.h>
+#include <mach/notify.h>
+#include <mach_error.h>
+#include <mach/exception.h>
+#include <mach/vm_attributes.h>
+
+#include "defs.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+#include "language.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+
+#if 0
+#include <servers/machid_lib.h>
+#else
+#define	MACH_TYPE_TASK			1
+#define MACH_TYPE_THREAD		2
+#endif
+
+/* Included only for signal names and NSIG
+ *
+ * note: There are many problems in signal handling with
+ *       gdb in Mach 3.0 in general.
+ */
+#include <signal.h>
+#define SIG_UNKNOWN 0	/* Exception that has no matching unix signal */
+
+#include <cthreads.h>
+
+/* This is what a cproc looks like.  This is here partly because
+   cthread_internals.h is not a header we can just #include, partly with
+   an eye towards perhaps getting this to work with cross-debugging
+   someday.  Best solution is if CMU publishes a real interface to this
+   stuff.  */
+#define CPROC_NEXT_OFFSET 0
+#define CPROC_NEXT_SIZE (TARGET_PTR_BIT / HOST_CHAR_BIT)
+#define CPROC_INCARNATION_OFFSET (CPROC_NEXT_OFFSET + CPROC_NEXT_SIZE)
+#define CPROC_INCARNATION_SIZE (sizeof (cthread_t))
+#define CPROC_LIST_OFFSET (CPROC_INCARNATION_OFFSET + CPROC_INCARNATION_SIZE)
+#define CPROC_LIST_SIZE (TARGET_PTR_BIT / HOST_CHAR_BIT)
+#define CPROC_WAIT_OFFSET (CPROC_LIST_OFFSET + CPROC_LIST_SIZE)
+#define CPROC_WAIT_SIZE (TARGET_PTR_BIT / HOST_CHAR_BIT)
+#define CPROC_REPLY_OFFSET (CPROC_WAIT_OFFSET + CPROC_WAIT_SIZE)
+#define CPROC_REPLY_SIZE (sizeof (mach_port_t))
+#define CPROC_CONTEXT_OFFSET (CPROC_REPLY_OFFSET + CPROC_REPLY_SIZE)
+#define CPROC_CONTEXT_SIZE (TARGET_INT_BIT / HOST_CHAR_BIT)
+#define CPROC_LOCK_OFFSET (CPROC_CONTEXT_OFFSET + CPROC_CONTEXT_SIZE)
+#define CPROC_LOCK_SIZE (sizeof (spin_lock_t))
+#define CPROC_STATE_OFFSET (CPROC_LOCK_OFFSET + CPROC_LOCK_SIZE)
+#define CPROC_STATE_SIZE (TARGET_INT_BIT / HOST_CHAR_BIT)
+#define CPROC_WIRED_OFFSET (CPROC_STATE_OFFSET + CPROC_STATE_SIZE)
+#define CPROC_WIRED_SIZE (sizeof (mach_port_t))
+#define CPROC_BUSY_OFFSET (CPROC_WIRED_OFFSET + CPROC_WIRED_SIZE)
+#define CPROC_BUSY_SIZE (TARGET_INT_BIT / HOST_CHAR_BIT)
+#define CPROC_MSG_OFFSET (CPROC_BUSY_OFFSET + CPROC_BUSY_SIZE)
+#define CPROC_MSG_SIZE (sizeof (mach_msg_header_t))
+#define CPROC_BASE_OFFSET (CPROC_MSG_OFFSET + CPROC_MSG_SIZE)
+#define CPROC_BASE_SIZE (TARGET_INT_BIT / HOST_CHAR_BIT)
+#define CPROC_SIZE_OFFSET (CPROC_BASE_OFFSET + CPROC_BASE_SIZE)
+#define CPROC_SIZE_SIZE (TARGET_INT_BIT / HOST_CHAR_BIT)
+#define CPROC_SIZE (CPROC_SIZE_OFFSET + CPROC_SIZE_SIZE)
+
+/* Values for the state field in the cproc.  */
+#define CPROC_RUNNING	0
+#define CPROC_SWITCHING 1
+#define CPROC_BLOCKED	2
+#define CPROC_CONDWAIT	4
+
+/* For cproc and kernel thread mapping */
+typedef struct gdb_thread {
+  mach_port_t	name;
+  CORE_ADDR	sp;
+  CORE_ADDR	pc;
+  CORE_ADDR	fp;
+  boolean_t     in_emulator;
+  int		slotid;
+
+  /* This is for the mthreads list.  It points to the cproc list.
+     Perhaps the two lists should be merged (or perhaps it was a mistake
+     to make them both use a struct gdb_thread).  */
+  struct gdb_thread *cproc;
+
+  /* These are for the cproc list, which is linked through the next field
+     of the struct gdb_thread.  */
+  char raw_cproc[CPROC_SIZE];
+  /* The cthread which is pointed to by the incarnation field from the
+     cproc.  This points to the copy we've read into GDB.  */
+  cthread_t cthread;
+  /* Point back to the mthreads list.  */
+  int reverse_map;
+  struct gdb_thread *next;
+} *gdb_thread_t;
+
+/* 
+ * Actions for Mach exceptions.
+ *
+ * sigmap field maps the exception to corresponding Unix signal.
+ *
+ * I do not know how to map the exception to unix signal
+ * if SIG_UNKNOWN is specified.
+ */
+
+struct exception_list {
+  char *name;
+  boolean_t forward;
+  boolean_t print;
+  int       sigmap;
+} exception_map[] = {
+  {"not_mach3_exception",	FALSE, TRUE,  SIG_UNKNOWN},
+  {"EXC_BAD_ACCESS",		FALSE, TRUE,  SIGSEGV},
+  {"EXC_BAD_INSTRUCTION",	FALSE, TRUE,  SIGILL},
+  {"EXC_ARITHMETIC",		FALSE, TRUE,  SIGFPE},
+  {"EXC_EMULATION",		FALSE, TRUE,  SIGEMT},	/* ??? */
+  {"EXC_SOFTWARE",		FALSE, TRUE,  SIG_UNKNOWN},
+  {"EXC_BREAKPOINT",		FALSE, FALSE, SIGTRAP}
+};
+
+/* Mach exception table size */
+int max_exception = sizeof(exception_map)/sizeof(struct exception_list) - 1;
+
+#define MAX_EXCEPTION max_exception
+
+WAITTYPE wait_status;
+
+/* If you define this, intercepted bsd server calls will be
+ * dumped while waiting the inferior to EXEC the correct
+ * program
+ */
+/* #define DUMP_SYSCALL		/* debugging interceptor */
+
+/* xx_debug() outputs messages if this is nonzero.
+ * If > 1, DUMP_SYSCALL will dump message contents.
+ */
+int debug_level = 0;
+
+/* "Temporary" debug stuff */
+void
+xx_debug (fmt, a,b,c)
+char *fmt;
+int a,b,c;
+{
+  if (debug_level)
+    warning (fmt, a, b, c);
+}
+
+/* This is in libmach.a */
+extern  mach_port_t  name_server_port;
+
+/* Set in catch_exception_raise */
+int stop_exception, stop_code, stop_subcode;
+int stopped_in_exception;
+
+/* Thread that was the active thread when we stopped */
+thread_t stop_thread = MACH_PORT_NULL;
+
+char *hostname = "";
+
+/* Set when task is attached or created */
+boolean_t emulator_present = FALSE;
+
+task_t   inferior_task;
+thread_t current_thread;
+
+/* Exception ports for inferior task */
+mach_port_t inferior_exception_port     = MACH_PORT_NULL;
+mach_port_t inferior_old_exception_port = MACH_PORT_NULL;
+
+/* task exceptions and notifications */
+mach_port_t inferior_wait_port_set	= MACH_PORT_NULL;
+mach_port_t our_notify_port       	= MACH_PORT_NULL;
+
+/* This is "inferior_wait_port_set" when not single stepping, and
+ *         "singlestepped_thread_port" when we are single stepping.
+ * 
+ * This is protected by a cleanup function: discard_single_step()
+ */
+mach_port_t currently_waiting_for	= MACH_PORT_NULL;
+
+/* A port for external messages to gdb.
+ * External in the meaning that they do not come
+ * from the inferior_task, but rather from external
+ * tasks.
+ *
+ * As a debugging feature:
+ * A debugger debugging another debugger can stop the
+ * inferior debugger by the following command sequence
+ * (without running external programs)
+ *
+ *    (top-gdb) set stop_inferior_gdb ()
+ *    (top-gdb) continue
+ */
+mach_port_t our_message_port       	= MACH_PORT_NULL;
+
+/* For single stepping */
+mach_port_t thread_exception_port 	= MACH_PORT_NULL;
+mach_port_t thread_saved_exception_port = MACH_PORT_NULL;
+mach_port_t singlestepped_thread_port   = MACH_PORT_NULL;
+
+/* For machid calls */
+mach_port_t mid_server = MACH_PORT_NULL;
+mach_port_t mid_auth   = MACH_PORT_NULL;
+
+/* If gdb thinks the inferior task is not suspended, it
+ * must take suspend/abort the threads when it reads the state.
+ */
+int must_suspend_thread = 0;
+
+/* When single stepping, we switch the port that mach_really_wait() listens to.
+ * This cleanup is a guard to prevent the port set from being left to
+ * the singlestepped_thread_port when error() is called.
+ *  This is nonzero only when we are single stepping.
+ */
+#define NULL_CLEANUP (struct cleanup *)0
+struct cleanup *cleanup_step = NULL_CLEANUP;
+
+
+static struct target_ops m3_ops;
+
+static void m3_kill_inferior ();
+
+#if 0
+#define MACH_TYPE_EXCEPTION_PORT	-1
+#endif
+
+/* Chain of ports to remember requested notifications. */
+
+struct port_chain {
+  struct port_chain *next;
+  mach_port_t	     port;
+  int		     type;
+  int		     mid;  /* Now only valid with MACH_TYPE_THREAD and */
+  			   /*  MACH_TYPE_THREAD */
+};
+typedef struct port_chain *port_chain_t;
+
+/* Room for chain nodes comes from pchain_obstack */
+struct obstack pchain_obstack;
+struct obstack *port_chain_obstack = &pchain_obstack;
+
+/* For thread handling */
+struct obstack Cproc_obstack;
+struct obstack *cproc_obstack = &Cproc_obstack;
+
+/* the list of notified ports */
+port_chain_t notify_chain = (port_chain_t) NULL;
+
+port_chain_t
+port_chain_insert (list, name, type)
+     port_chain_t list;
+     mach_port_t name;
+     int	 type;
+{
+  kern_return_t ret;
+  port_chain_t new;
+  int mid;
+
+  if (! MACH_PORT_VALID (name))
+    return list;
+  
+  if (type == MACH_TYPE_TASK || type == MACH_TYPE_THREAD)
+    {
+      if (! MACH_PORT_VALID (mid_server))
+	{
+	  warning ("Machid server port invalid, can not map port 0x%x to MID",
+		   name);
+	  mid = name;
+	}
+      else
+	{
+	  ret = machid_mach_register (mid_server, mid_auth, name, type, &mid);
+	  
+	  if (ret != KERN_SUCCESS)
+	    {
+	      warning ("Can not map name (0x%x) to MID with machid", name);
+	      mid = name;
+	    }
+	}
+    }
+  else
+    abort ();
+
+  new = (port_chain_t) obstack_alloc (port_chain_obstack,
+				      sizeof (struct port_chain));
+  new->next  = list;
+  new->port  = name;
+  new->type  = type;
+  new->mid   = mid;
+
+  return new;
+}
+
+port_chain_t
+port_chain_delete (list, elem)
+     port_chain_t list;
+     mach_port_t elem;
+{
+  if (list)
+    if (list->port == elem)
+      list = list->next;
+    else
+      while (list->next)
+	{
+	  if (list->next->port == elem)
+	    list->next = list->next->next; /* GCd with obstack_free() */
+	  else
+	    list = list->next;
+	}
+  return list;
+}
+
+void
+port_chain_destroy (ostack)
+     struct obstack *ostack;
+{
+  obstack_free (ostack, 0);
+  obstack_init (ostack);
+}
+
+port_chain_t
+port_chain_member (list, elem)
+     port_chain_t list;
+     mach_port_t elem;
+{
+  while (list)
+    {
+      if (list->port == elem)
+	return list;
+      list = list->next;
+    }
+  return (port_chain_t) NULL;
+}
+
+int
+map_port_name_to_mid (name, type)
+mach_port_t name;
+int         type;
+{
+  port_chain_t elem;
+
+  if (!MACH_PORT_VALID (name))
+    return -1;
+
+  elem = port_chain_member (notify_chain, name);
+
+  if (elem && (elem->type == type))
+    return elem->mid;
+  
+  if (elem)
+    return -1;
+  
+  if (! MACH_PORT_VALID (mid_server))
+    {
+      warning ("Machid server port invalid, can not map port 0x%x to mid",
+	       name);
+      return -1;
+    }
+  else
+    {
+      int mid;
+      kern_return_t ret;
+
+      ret = machid_mach_register (mid_server, mid_auth, name, type, &mid);
+      
+      if (ret != KERN_SUCCESS)
+	{
+	  warning ("Can not map name (0x%x) to mid with machid", name);
+	  return -1;
+	}
+      return mid;
+    }
+}
+
+/* Guard for currently_waiting_for and singlestepped_thread_port */
+static void
+discard_single_step (thread)
+     thread_t thread;
+{
+  currently_waiting_for = inferior_wait_port_set;
+
+  cleanup_step = NULL_CLEANUP;
+  if (MACH_PORT_VALID (thread) && MACH_PORT_VALID (singlestepped_thread_port))
+    setup_single_step (thread, FALSE);
+}
+
+setup_single_step (thread, start_step)
+     thread_t  thread;
+     boolean_t start_step;
+{
+  kern_return_t ret;
+
+  if (! MACH_PORT_VALID (thread))
+    error ("Invalid thread supplied to setup_single_step");
+  else
+    {
+      mach_port_t teport;
+
+      /* Get the current thread exception port */
+      ret = thread_get_exception_port (thread, &teport);
+      CHK ("Getting thread's exception port", ret);
+	  
+      if (start_step)
+	{
+	  if (MACH_PORT_VALID (singlestepped_thread_port))
+	    {
+	      warning ("Singlestepped_thread_port (0x%x) is still valid?",
+		       singlestepped_thread_port);
+	      singlestepped_thread_port = MACH_PORT_NULL;
+	    }
+      
+	  /* If we are already stepping this thread */
+	  if (MACH_PORT_VALID (teport) && teport == thread_exception_port)
+	    {
+	      ret = mach_port_deallocate (mach_task_self (), teport);
+	      CHK ("Could not deallocate thread exception port", ret);
+	    }
+	  else
+	    {
+	      ret = thread_set_exception_port (thread, thread_exception_port);
+	      CHK ("Setting exception port for thread", ret);
+#if 0
+	      /* Insert thread exception port to wait port set */
+	      ret = mach_port_move_member (mach_task_self(), 
+					   thread_exception_port,
+					   inferior_wait_port_set);
+	      CHK ("Moving thread exception port to inferior_wait_port_set",
+		   ret);
+#endif
+	      thread_saved_exception_port = teport;
+	    }
+	  
+	  thread_trace (thread, TRUE);
+	  
+	  singlestepped_thread_port   = thread_exception_port;
+	  currently_waiting_for       = singlestepped_thread_port;
+	  cleanup_step = make_cleanup (discard_single_step, thread);
+	}
+      else
+	{
+	  if (! MACH_PORT_VALID (teport))
+	    error ("Single stepped thread had an invalid exception port?");
+
+	  if (teport != thread_exception_port)
+	    error ("Single stepped thread had an unknown exception port?");
+	  
+	  ret = mach_port_deallocate (mach_task_self (), teport);
+	  CHK ("Couldn't deallocate thread exception port", ret);
+#if 0
+	  /* Remove thread exception port from wait port set */
+	  ret = mach_port_move_member (mach_task_self(), 
+				       thread_exception_port,
+				       MACH_PORT_NULL);
+	  CHK ("Removing thread exception port from inferior_wait_port_set",
+	       ret);
+#endif	  
+	  /* Restore thread's old exception port */
+	  ret = thread_set_exception_port (thread,
+					   thread_saved_exception_port);
+	  CHK ("Restoring stepped thread's exception port", ret);
+	  
+	  if (MACH_PORT_VALID (thread_saved_exception_port))
+	    (void) mach_port_deallocate (mach_task_self (),
+					 thread_saved_exception_port);
+	  
+	  thread_trace (thread, FALSE);
+	  
+	  singlestepped_thread_port = MACH_PORT_NULL;
+	  currently_waiting_for = inferior_wait_port_set;
+	  if (cleanup_step)
+	    discard_cleanups (cleanup_step);
+	}
+    }
+}
+
+static
+request_notify (name, variant, type)
+     mach_port_t	name;
+     mach_msg_id_t	variant;
+     int	        type;
+{
+  kern_return_t ret;
+  mach_port_t	previous_port_dummy = MACH_PORT_NULL;
+  
+  if (! MACH_PORT_VALID (name))
+    return;
+  
+  if (port_chain_member (notify_chain, name))
+    return;
+
+  ret = mach_port_request_notification (mach_task_self(),
+					name,
+					variant,
+					1,
+					our_notify_port,
+					MACH_MSG_TYPE_MAKE_SEND_ONCE,
+					&previous_port_dummy);
+  CHK ("Serious: request_notify failed", ret);
+
+  (void) mach_port_deallocate (mach_task_self (),
+			       previous_port_dummy);
+
+  notify_chain = port_chain_insert (notify_chain, name, type);
+}
+
+reverse_msg_bits(msgp, type)
+     mach_msg_header_t	*msgp;
+     int type;
+{
+  int		rbits,lbits;
+  rbits = MACH_MSGH_BITS_REMOTE(msgp->msgh_bits);
+  lbits = type;
+  msgp->msgh_bits =
+    (msgp->msgh_bits & ~MACH_MSGH_BITS_PORTS_MASK) |
+      MACH_MSGH_BITS(lbits,rbits);
+}
+
+/* On the third day He said:
+
+   	Let this be global
+	and then it was global.
+
+   When creating the inferior fork, the
+   child code in inflow.c sets the name of the
+   bootstrap_port in its address space to this
+   variable.
+
+   The name is transferred to our address space
+   with mach3_read_inferior().
+
+   Thou shalt not do this with
+   task_get_bootstrap_port() in this task, since
+   the name in the inferior task is different than
+   the one we get.
+
+   For blessed are the meek, as they shall inherit
+   the address space.
+ */
+mach_port_t original_server_port_name = MACH_PORT_NULL;
+
+
+/* Called from inferior after FORK but before EXEC */
+static void
+m3_trace_me ()
+{
+  kern_return_t ret;
+  
+  /* Get the NAME of the bootstrap port in this task
+     so that GDB can read it */
+  ret = task_get_bootstrap_port (mach_task_self (),
+				 &original_server_port_name);
+  if (ret != KERN_SUCCESS)
+    abort ();
+  ret = mach_port_deallocate (mach_task_self (),
+			      original_server_port_name);
+  if (ret != KERN_SUCCESS)
+    abort ();
+  
+  /* Suspend this task to let the parent change my ports.
+     Resumed by the debugger */
+  ret = task_suspend (mach_task_self ());
+  if (ret != KERN_SUCCESS)
+    abort ();
+}
+
+/*
+ * Intercept system calls to Unix server.
+ * After EXEC_COUNTER calls to exec(), return.
+ *
+ * Pre-assertion:  Child is suspended. (Not verified)
+ * Post-condition: Child is suspended after EXEC_COUNTER exec() calls.
+ */
+
+void
+intercept_exec_calls (exec_counter)
+     int exec_counter;
+{
+  int terminal_initted = 0;
+
+  struct syscall_msg_t {
+    mach_msg_header_t	header;
+    mach_msg_type_t 	type;
+    char room[ 2000 ];	/* Enuff space */
+  };
+
+  struct syscall_msg_t syscall_in, syscall_out;
+
+  mach_port_t fake_server;
+  mach_port_t original_server_send;
+  mach_port_t original_exec_reply;
+  mach_port_t exec_reply;
+  mach_port_t exec_reply_send;
+  mach_msg_type_name_t acquired;
+  mach_port_t emulator_server_port_name;
+  struct task_basic_info info;
+  mach_msg_type_number_t info_count;
+
+  kern_return_t ret;
+
+  if (exec_counter <= 0)
+    return;		/* We are already set up in the correct program */
+
+  ret = mach_port_allocate(mach_task_self(), 
+			   MACH_PORT_RIGHT_RECEIVE,
+			   &fake_server);
+  CHK("create inferior_fake_server port failed", ret);
+  
+  /* Wait for inferior_task to suspend itself */
+  while(1)
+    {
+      info_count = sizeof (info);
+      ret = task_info (inferior_task,
+		       TASK_BASIC_INFO,
+		       (task_info_t)&info,
+		       &info_count);
+      CHK ("Task info", ret);
+
+      if (info.suspend_count)
+	break;
+
+      /* Note that the definition of the parameter was undefined
+       * at the time of this writing, so I just use an `ad hoc' value.
+       */
+      (void) swtch_pri (42); /* Universal Priority Value */
+    }
+
+  /* Read the inferior's bootstrap port name */
+  if (!mach3_read_inferior (&original_server_port_name,
+			    &original_server_port_name,
+			    sizeof (original_server_port_name)))
+    error ("Can't read inferior task bootstrap port name");
+
+  /* @@ BUG: If more than 1 send right GDB will FAIL!!! */
+  /*      Should get refs, and set them back when restoring */
+  /* Steal the original bsd server send right from inferior */
+  ret = mach_port_extract_right (inferior_task,
+				 original_server_port_name,
+				 MACH_MSG_TYPE_MOVE_SEND,
+				 &original_server_send,
+				 &acquired);
+  CHK("mach_port_extract_right (bsd server send)",ret);
+  
+  if (acquired != MACH_MSG_TYPE_PORT_SEND)
+    error("Incorrect right extracted, send right to bsd server excpected");
+
+  ret = mach_port_insert_right (inferior_task,
+				original_server_port_name,
+				fake_server,
+				MACH_MSG_TYPE_MAKE_SEND);
+  CHK("mach_port_insert_right (fake server send)",ret);
+
+  xx_debug ("inferior task bsd server ports set up \nfs %x, ospn %x, oss %x\n",
+	    fake_server,
+	    original_server_port_name, original_server_send);
+
+  /* A receive right to the reply generated by unix server exec() request */
+  ret = mach_port_allocate(mach_task_self(), 
+			   MACH_PORT_RIGHT_RECEIVE,
+			   &exec_reply);
+  CHK("create intercepted_reply_port port failed", ret);
+    
+  /* Pass this send right to Unix server so it replies to us after exec() */
+  ret = mach_port_extract_right (mach_task_self (),
+				 exec_reply,
+				 MACH_MSG_TYPE_MAKE_SEND_ONCE,
+				 &exec_reply_send,
+				 &acquired);
+  CHK("mach_port_extract_right (exec_reply)",ret);
+
+  if (acquired != MACH_MSG_TYPE_PORT_SEND_ONCE)
+    error("Incorrect right extracted, send once excpected for exec reply");
+
+  ret = mach_port_move_member(mach_task_self(), 
+			      fake_server,
+			      inferior_wait_port_set);
+  CHK ("Moving fake syscall port to inferior_wait_port_set", ret);
+
+  xx_debug ("syscall fake server set up, resuming inferior\n");
+  
+  ret = task_resume (inferior_task);
+  CHK("task_resume (startup)", ret);
+	
+  /* Read requests from the inferior.
+     Pass directly through everything else except exec() calls.
+   */
+  while(exec_counter > 0)
+    {
+      ret = mach_msg (&syscall_in.header,	/* header */
+		      MACH_RCV_MSG,		/* options */
+		      0,			/* send size */
+		      sizeof (struct syscall_msg_t), /* receive size */
+		      inferior_wait_port_set,        /* receive_name */
+		      MACH_MSG_TIMEOUT_NONE,
+		      MACH_PORT_NULL);
+      CHK("mach_msg (intercepted sycall)", ret);
+	    
+#ifdef DUMP_SYSCALL
+      print_msg (&syscall_in.header);
+#endif
+
+      /* ASSERT : msgh_local_port == fake_server */
+
+      if (notify_server (&syscall_in.header, &syscall_out.header))
+	error ("received a notify while intercepting syscalls");
+
+      if (syscall_in.header.msgh_id == MIG_EXEC_SYSCALL_ID)
+	{
+	  xx_debug ("Received EXEC SYSCALL, counter = %d\n", exec_counter);
+	  if (exec_counter == 1)
+	    {
+	      original_exec_reply = syscall_in.header.msgh_remote_port;
+	      syscall_in.header.msgh_remote_port = exec_reply_send;
+	    }
+
+	  if (!terminal_initted)
+	    {
+	      /* Now that the child has exec'd we know it has already set its
+		 process group.  On POSIX systems, tcsetpgrp will fail with
+		 EPERM if we try it before the child's setpgid.  */
+
+	      /* Set up the "saved terminal modes" of the inferior
+		 based on what modes we are starting it with.  */
+	      target_terminal_init ();
+
+	      /* Install inferior's terminal modes.  */
+	      target_terminal_inferior ();
+
+	      terminal_initted = 1;
+	    }
+
+	  exec_counter--;
+	}
+	    
+      syscall_in.header.msgh_local_port  = syscall_in.header.msgh_remote_port;
+      syscall_in.header.msgh_remote_port = original_server_send;
+
+      reverse_msg_bits(&syscall_in.header, MACH_MSG_TYPE_COPY_SEND);
+
+      ret = mach_msg_send (&syscall_in.header);
+      CHK ("Forwarded syscall", ret);
+    }
+	
+  ret = mach_port_move_member(mach_task_self(), 
+			      fake_server,
+			      MACH_PORT_NULL);
+  CHK ("Moving fake syscall out of inferior_wait_port_set", ret);
+
+  ret = mach_port_move_member(mach_task_self(), 
+			      exec_reply,
+			      inferior_wait_port_set);
+  CHK ("Moving exec_reply to inferior_wait_port_set", ret);
+
+  ret = mach_msg (&syscall_in.header,	/* header */
+		  MACH_RCV_MSG,		/* options */
+		  0,			/* send size */
+		  sizeof (struct syscall_msg_t),	/* receive size */
+		  inferior_wait_port_set,		/* receive_name */
+		  MACH_MSG_TIMEOUT_NONE,
+		  MACH_PORT_NULL);
+  CHK("mach_msg (exec reply)", ret);
+
+  ret = task_suspend (inferior_task);
+  CHK ("Suspending inferior after last exec", ret);
+
+  must_suspend_thread = 0;
+
+  xx_debug ("Received exec reply from bsd server, suspended inferior task\n");
+
+#ifdef DUMP_SYSCALL
+      print_msg (&syscall_in.header);
+#endif
+
+  /* Message should appear as if it came from the unix server */
+  syscall_in.header.msgh_local_port = MACH_PORT_NULL;
+
+  /*  and go to the inferior task original reply port */
+  syscall_in.header.msgh_remote_port = original_exec_reply;
+
+  reverse_msg_bits(&syscall_in.header, MACH_MSG_TYPE_MOVE_SEND_ONCE);
+
+  ret = mach_msg_send (&syscall_in.header);
+  CHK ("Forwarding exec reply to inferior", ret);
+
+  /* Garbage collect */
+  ret = mach_port_deallocate (inferior_task,
+			      original_server_port_name);
+  CHK ("deallocating fake server send right", ret);
+
+  ret = mach_port_insert_right (inferior_task,
+				original_server_port_name,
+				original_server_send,
+				MACH_MSG_TYPE_MOVE_SEND);
+  CHK ("Restoring the original bsd server send right", ret);
+
+  ret = mach_port_destroy (mach_task_self (),
+			   fake_server);
+  fake_server = MACH_PORT_DEAD;
+  CHK("mach_port_destroy (fake_server)", ret);
+
+  ret = mach_port_destroy (mach_task_self (),
+			   exec_reply);
+  exec_reply = MACH_PORT_DEAD;
+  CHK("mach_port_destroy (exec_reply)", ret);
+
+  xx_debug ("Done with exec call interception\n");
+}
+
+void
+consume_send_rights (thread_list, thread_count)
+     thread_array_t thread_list;
+     int            thread_count;
+{
+  int index;
+
+  if (!thread_count)
+    return;
+
+  for (index = 0; index < thread_count; index++)
+    {
+      /* Since thread kill command kills threads, don't check ret */
+      (void) mach_port_deallocate (mach_task_self (),
+				   thread_list [ index ]);
+    }
+}
+
+/* suspend/abort/resume a thread. */
+setup_thread (thread, what)
+     mach_port_t thread;
+     int what;
+{
+  kern_return_t ret;
+
+  if (what)
+    {
+      ret = thread_suspend (thread);
+      CHK ("setup_thread thread_suspend", ret);
+      
+      ret = thread_abort (thread);
+      CHK ("setup_thread thread_abort", ret);
+    }
+  else
+    {
+      ret = thread_resume (thread);
+      CHK ("setup_thread thread_resume", ret);
+    }
+}
+
+int
+map_slot_to_mid (slot, threads, thread_count)
+     int slot;
+     thread_array_t threads;
+     int thread_count;
+{
+  kern_return_t ret;
+  int deallocate = 0;
+  int index;
+  int mid;
+
+  if (! threads)
+    {
+      deallocate++;
+      ret = task_threads (inferior_task, &threads, &thread_count);
+      CHK ("Can not select a thread from a dead task", ret);
+    }
+  
+  if (slot < 0 || slot >= thread_count)
+    {
+      if (deallocate)
+	{
+	  consume_send_rights (threads, thread_count);
+	  (void) vm_deallocate (mach_task_self(), (vm_address_t)threads, 
+				(thread_count * sizeof(mach_port_t)));
+	}
+      if (slot < 0)
+	error ("invalid slot number");
+      else
+	return -(slot+1);
+    }
+
+  mid = map_port_name_to_mid (threads [slot], MACH_TYPE_THREAD);
+
+  if (deallocate)
+    {
+      consume_send_rights (threads, thread_count);
+      (void) vm_deallocate (mach_task_self(), (vm_address_t)threads, 
+			    (thread_count * sizeof(mach_port_t)));
+    }
+
+  return mid;
+}
+
+static int
+parse_thread_id (arg, thread_count, slots)
+     char *arg;
+     int thread_count;
+     int slots;
+{
+  kern_return_t ret;
+  int mid;
+  int slot;
+  int index;
+  
+  if (arg == 0)
+    return 0;
+  
+  while (*arg && (*arg == ' ' || *arg == '\t'))
+    arg++;
+  
+  if (! *arg)
+    return 0;
+  
+  /* Currently parse MID and @SLOTNUMBER */
+  if (*arg != '@')
+    {
+      mid = atoi (arg);
+      if (mid <= 0)
+	error ("valid thread mid expected");
+      return mid;
+    }
+  
+  arg++;
+  slot = atoi (arg);
+
+  if (slot < 0)
+    error ("invalid slot number");
+
+  /* If you want slot numbers to remain slot numbers, set slots.
+   *
+   * Well, since 0 is reserved, return the ordinal number
+   * of the thread rather than the slot number. Awk, this
+   * counts as a kludge.
+   */
+  if (slots)
+    return -(slot+1);
+
+  if (thread_count && slot >= thread_count)
+    return -(slot+1);
+
+  mid = map_slot_to_mid (slot);
+  
+  return mid;
+}
+
+/* THREAD_ID 0 is special; it selects the first kernel
+ * thread from the list (i.e. SLOTNUMBER 0)
+ * This is used when starting the program with 'run' or when attaching.
+ *
+ * If FLAG is 0 the context is not changed, and the registers, frame, etc
+ * will continue to describe the old thread.
+ *
+ * If FLAG is nonzero, really select the thread.
+ * If FLAG is 2, the THREAD_ID is a slotnumber instead of a mid.
+ * 
+ */
+kern_return_t
+select_thread (task, thread_id, flag)
+     mach_port_t task;
+     int thread_id;
+     int flag;
+{
+  thread_array_t thread_list;
+  int thread_count;
+  kern_return_t ret;
+  int index;
+  thread_t new_thread = MACH_PORT_NULL;
+
+  if (thread_id < 0)
+    error ("Can't select cprocs without kernel thread");
+
+  ret = task_threads (task, &thread_list, &thread_count);
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("Can not select a thread from a dead task");
+      m3_kill_inferior ();
+      return KERN_FAILURE;
+    }
+
+  if (thread_count == 0)
+    {
+      /* The task can not do anything anymore, but it still
+       * exists as a container for memory and ports.
+       */
+      registers_changed ();
+      warning ("Task %d has no threads",
+	       map_port_name_to_mid (task, MACH_TYPE_TASK));
+      current_thread = MACH_PORT_NULL;
+      (void) vm_deallocate(mach_task_self(),
+			   (vm_address_t) thread_list,
+			   (thread_count * sizeof(mach_port_t)));
+      return KERN_FAILURE;
+    }
+
+  if (! thread_id || flag == 2)
+    {
+      /* First thread or a slotnumber */
+      if (! thread_id)
+	new_thread = thread_list[0];
+      else
+	{
+	  if (thread_id < thread_count)
+	    new_thread = thread_list[ thread_id ];
+	  else
+	    {
+	      (void) vm_deallocate(mach_task_self(),
+				   (vm_address_t) thread_list,
+				   (thread_count * sizeof(mach_port_t)));
+	      error ("No such thread slot number : %d", thread_id);
+	    }
+	}
+    }
+  else
+    {
+      for (index = 0; index < thread_count; index++)
+	if (thread_id == map_port_name_to_mid (thread_list [index],
+					       MACH_TYPE_THREAD))
+	  {
+	    new_thread = thread_list [index];
+	    index = -1;
+	    break;
+	  }
+      
+      if (index != -1)
+	error ("No thread with mid %d", thread_id);
+    }
+  
+  /* Notify when the selected thread dies */
+  request_notify (new_thread, MACH_NOTIFY_DEAD_NAME, MACH_TYPE_THREAD);
+  
+  ret = vm_deallocate(mach_task_self(),
+		      (vm_address_t) thread_list,
+		      (thread_count * sizeof(mach_port_t)));
+  CHK ("vm_deallocate", ret);
+  
+  if (! flag)
+    current_thread = new_thread;
+  else
+    {
+#if 0
+      if (MACH_PORT_VALID (current_thread))
+	{
+	  /* Store the gdb's view of the thread we are deselecting
+	   *
+	   * @@ I think gdb updates registers immediately when they are
+	   * changed, so don't do this.
+	   */
+	  ret = thread_abort (current_thread);
+	  CHK ("Could not abort system calls when saving state of old thread",
+	       ret);
+	  target_prepare_to_store ();
+	  target_store_registers (-1);
+	}
+#endif
+
+      registers_changed ();
+
+      current_thread = new_thread;
+
+      ret = thread_abort (current_thread);
+      CHK ("Could not abort system calls when selecting a thread", ret);
+
+      stop_pc = read_pc();
+      flush_cached_frames ();
+
+      select_frame (get_current_frame (), 0);
+    }
+
+  return KERN_SUCCESS;
+}
+
+/*
+ * Switch to use thread named NEW_THREAD.
+ * Return it's MID
+ */
+int
+switch_to_thread (new_thread)
+     thread_t new_thread;
+{
+  thread_t saved_thread = current_thread;
+  int mid;
+
+  mid = map_port_name_to_mid (new_thread,
+			      MACH_TYPE_THREAD);
+  if (mid == -1)
+    warning ("Can't map thread name 0x%x to mid", new_thread);
+  else if (select_thread (inferior_task, mid, 1) != KERN_SUCCESS)
+    {
+      if (current_thread)
+	current_thread = saved_thread;
+      error ("Could not select thread %d", mid);
+    }
+	
+  return mid;
+}
+
+/* Do this in gdb after doing FORK but before STARTUP_INFERIOR.
+ * Note that the registers are not yet valid in the inferior task.
+ */
+static int
+m3_trace_him (pid)
+     int pid;
+{
+  kern_return_t ret;
+
+  push_target (&m3_ops);
+
+  inferior_task = task_by_pid (pid);
+
+  if (! MACH_PORT_VALID (inferior_task))
+    error ("Can not map Unix pid %d to Mach task", pid);
+
+  /* Clean up previous notifications and create new ones */
+  setup_notify_port (1);
+
+  /* When notification appears, the inferior task has died */
+  request_notify (inferior_task, MACH_NOTIFY_DEAD_NAME, MACH_TYPE_TASK);
+
+  emulator_present = have_emulator_p (inferior_task);
+
+  /* By default, select the first thread,
+   * If task has no threads, gives a warning
+   * Does not fetch registers, since they are not yet valid.
+   */
+  select_thread (inferior_task, 0, 0);
+
+  inferior_exception_port = MACH_PORT_NULL;
+
+  setup_exception_port ();
+
+  xx_debug ("Now the debugged task is created\n");
+
+  /* One trap to exec the shell, one to exec the program being debugged.  */
+  intercept_exec_calls (2);
+
+  return pid;
+}
+
+setup_exception_port ()
+{
+  kern_return_t ret;
+
+  ret = mach_port_allocate (mach_task_self(), 
+			    MACH_PORT_RIGHT_RECEIVE,
+			    &inferior_exception_port);
+  CHK("mach_port_allocate",ret);
+
+  /* add send right */
+  ret = mach_port_insert_right (mach_task_self (),
+				inferior_exception_port,
+				inferior_exception_port,
+				MACH_MSG_TYPE_MAKE_SEND);
+  CHK("mach_port_insert_right",ret);
+
+  ret = mach_port_move_member (mach_task_self(), 
+			       inferior_exception_port,
+			       inferior_wait_port_set);
+  CHK("mach_port_move_member",ret);
+
+  ret = task_get_special_port (inferior_task, 
+			       TASK_EXCEPTION_PORT,
+			       &inferior_old_exception_port);
+  CHK ("task_get_special_port(old exc)",ret);
+
+  ret = task_set_special_port (inferior_task,
+			       TASK_EXCEPTION_PORT, 
+			       inferior_exception_port);
+  CHK("task_set_special_port",ret);
+
+  ret = mach_port_deallocate (mach_task_self (),
+			      inferior_exception_port);
+  CHK("mack_port_deallocate",ret);
+
+#if 0
+  /* When notify appears, the inferior_task's exception
+   * port has been destroyed.
+   *
+   * Not used, since the dead_name_notification already
+   * appears when task dies.
+   *
+   */
+  request_notify (inferior_exception_port,
+		  MACH_NOTIFY_NO_SENDERS,
+		  MACH_TYPE_EXCEPTION_PORT);
+#endif
+}
+
+/* Nonzero if gdb is waiting for a message */
+int mach_really_waiting;
+
+/* Wait for the inferior to stop for some reason.
+   - Loop on notifications until inferior_task dies.
+   - Loop on exceptions until stopped_in_exception comes true.
+     (e.g. we receive a single step trace trap)
+   - a message arrives to gdb's message port
+
+   There is no other way to exit this loop.
+
+   Returns the inferior_pid for rest of gdb.
+   Side effects: Set *OURSTATUS.  */
+int
+mach_really_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  kern_return_t ret;
+  int w;
+
+  struct msg {
+    mach_msg_header_t    header;
+    mach_msg_type_t foo;
+    int             data[8000];
+  } in_msg, out_msg;
+
+  /* Either notify (death), exception or message can stop the inferior */
+  stopped_in_exception = FALSE;
+
+  while (1)
+    {
+      QUIT;
+
+      stop_exception = stop_code = stop_subcode = -1;
+      stop_thread = MACH_PORT_NULL;
+
+      mach_really_waiting = 1;
+      ret = mach_msg (&in_msg.header,		/* header */
+		      MACH_RCV_MSG,		/* options */
+		      0,			/* send size */
+		      sizeof (struct msg),	/* receive size */
+		      currently_waiting_for,	/* receive name */
+		      MACH_MSG_TIMEOUT_NONE,
+		      MACH_PORT_NULL);
+      mach_really_waiting = 0;
+      CHK("mach_msg (receive)", ret);
+
+      /* Check if we received a notify of the childs' death */
+      if (notify_server (&in_msg.header, &out_msg.header))
+	{
+	  /* If inferior_task is null then the inferior has
+	     gone away and we want to return to command level.
+	     Otherwise it was just an informative message and we
+	     need to look to see if there are any more. */
+	  if (inferior_task != MACH_PORT_NULL)
+	    continue;
+	  else
+	    {
+	      /* Collect Unix exit status for gdb */
+
+	      wait3(&w, WNOHANG, 0);
+
+	      /* This mess is here to check that the rest of
+	       * gdb knows that the inferior died. It also
+	       * tries to hack around the fact that Mach 3.0 (mk69)
+	       * unix server (ux28) does not always know what
+	       * has happened to it's children when mach-magic
+	       * is applied on them.
+	       */
+	      if ((!WIFEXITED(w) && WIFSTOPPED(w))         ||
+		  (WIFEXITED(w)  && WEXITSTATUS(w) > 0377))
+		{
+		  WSETEXIT(w, 0);
+		  warning ("Using exit value 0 for terminated task");
+		}
+	      else if (!WIFEXITED(w))
+		{
+		  int sig = WTERMSIG(w);
+
+		  /* Signals cause problems. Warn the user. */
+		  if (sig != SIGKILL) /* Bad luck if garbage matches this */
+		    warning ("The terminating signal stuff may be nonsense");
+		  else if (sig > NSIG)
+		    {
+		      WSETEXIT(w, 0);
+		      warning ("Using exit value 0 for terminated task");
+		    }
+		}
+	      store_waitstatus (ourstatus, w);
+	      return inferior_pid;
+	    }
+	}
+
+      /* Hmm. Check for exception, as it was not a notification.
+	 exc_server() does an upcall to catch_exception_raise()
+	 if this rpc is an exception. Further actions are decided
+	 there.
+       */
+      if (! exc_server (&in_msg.header, &out_msg.header))
+	{
+
+	  /* Not an exception, check for message.
+	   *
+	   * Messages don't come from the inferior, or if they
+	   * do they better be asynchronous or it will hang.
+	   */
+	  if (gdb_message_server (&in_msg.header))
+	    continue;
+
+	  error ("Unrecognized message received in mach_really_wait");
+	}
+
+      /* Send the reply of the exception rpc to the suspended task */
+      ret = mach_msg_send (&out_msg.header);
+      CHK ("mach_msg_send (exc reply)", ret);
+      
+      if (stopped_in_exception)
+	{
+	  /* Get unix state. May be changed in mach3_exception_actions() */
+	  wait3(&w, WNOHANG, 0);
+
+	  mach3_exception_actions (&w, FALSE, "Task");
+
+	  store_waitstatus (ourstatus, w);
+	  return inferior_pid;
+	}
+    }
+}
+
+/* Called by macro DO_QUIT() in utils.c(quit).
+ * This is called just before calling error() to return to command level
+ */
+void
+mach3_quit ()
+{
+  int mid;
+  kern_return_t ret;
+  
+  if (mach_really_waiting)
+    {
+      ret = task_suspend (inferior_task);
+      
+      if (ret != KERN_SUCCESS)
+	{
+	  warning ("Could not suspend task for interrupt: %s",
+		   mach_error_string (ret));
+	  mach_really_waiting = 0;
+	  return;
+	}
+    }
+
+  must_suspend_thread = 0;
+  mach_really_waiting = 0;
+
+  mid = map_port_name_to_mid (current_thread, MACH_TYPE_THREAD);
+  if (mid == -1)
+    {
+      warning ("Selecting first existing kernel thread");
+      mid = 0;
+    }
+
+  current_thread = MACH_PORT_NULL; /* Force setup */
+  select_thread (inferior_task, mid, 1);
+
+  return;
+}
+
+#if 0
+/* bogus bogus bogus.  It is NOT OK to quit out of target_wait.  */
+
+/* If ^C is typed when we are waiting for a message
+ * and your Unix server is able to notice that we 
+ * should quit now.
+ *
+ * Called by REQUEST_QUIT() from utils.c(request_quit)
+ */
+void
+mach3_request_quit ()
+{
+  if (mach_really_waiting)
+    immediate_quit = 1;
+}      
+#endif
+
+/*
+ * Gdb message server.
+ * Currently implemented is the STOP message, that causes
+ * gdb to return to the command level like ^C had been typed from terminal.
+ */
+int
+gdb_message_server (InP)
+     mach_msg_header_t *InP;
+{
+  kern_return_t ret;
+  int mid;
+
+  if (InP->msgh_local_port == our_message_port)
+    {
+      /* A message coming to our_message_port. Check validity */
+      switch (InP->msgh_id) {
+
+      case GDB_MESSAGE_ID_STOP:
+	ret = task_suspend (inferior_task);
+	if (ret != KERN_SUCCESS)
+	  warning ("Could not suspend task for stop message: %s",
+		   mach_error_string (ret));
+
+	/* QUIT in mach_really_wait() loop. */
+	request_quit (0);
+	break;
+
+      default:
+	warning ("Invalid message id %d received, ignored.",
+		 InP->msgh_id);
+	break;
+      }
+
+      return 1;
+    }
+
+  /* Message not handled by this server */
+  return 0;
+}
+
+/* NOTE: This is not an RPC call. It is a simpleroutine.
+ *
+ * This is not called from this gdb code.
+ *
+ * It may be called by another debugger to cause this
+ * debugger to enter command level:
+ *
+ *            (gdb) set stop_inferior_gdb ()
+ *            (gdb) continue
+ *
+ * External program "stop-gdb" implements this also.
+ */
+void
+stop_inferior_gdb ()
+{
+  kern_return_t ret;
+
+  /* Code generated by mig, with minor cleanups :-)
+   *
+   * simpleroutine stop_inferior_gdb (our_message_port : mach_port_t);
+   */
+
+  typedef struct {
+    mach_msg_header_t Head;
+  } Request;
+
+  Request Mess;
+
+  register Request *InP = &Mess;
+
+  InP->Head.msgh_bits = MACH_MSGH_BITS(MACH_MSG_TYPE_COPY_SEND, 0);
+
+  /* msgh_size passed as argument */
+  InP->Head.msgh_remote_port = our_message_port;
+  InP->Head.msgh_local_port  = MACH_PORT_NULL;
+  InP->Head.msgh_seqno       = 0;
+  InP->Head.msgh_id          = GDB_MESSAGE_ID_STOP;
+
+  ret = mach_msg (&InP->Head,
+		  MACH_SEND_MSG|MACH_MSG_OPTION_NONE,
+		  sizeof(Request),
+		  0,
+		  MACH_PORT_NULL,
+		  MACH_MSG_TIMEOUT_NONE,
+		  MACH_PORT_NULL);
+}
+
+#ifdef THREAD_ALLOWED_TO_BREAK
+/*
+ * Return 1 if the MID specifies the thread that caused the
+ * last exception.
+ *  Since catch_exception_raise() selects the thread causing
+ * the last exception to current_thread, we just check that
+ * it is selected and the last exception was a breakpoint.
+ */
+int
+mach_thread_for_breakpoint (mid)
+     int mid;
+{
+  int cmid = map_port_name_to_mid (current_thread, MACH_TYPE_THREAD);
+
+  if (mid < 0)
+    {
+      mid = map_slot_to_mid (-(mid+1), 0, 0);
+      if (mid < 0)
+	return 0;		/* Don't stop, no such slot */
+    }
+
+  if (! mid || cmid == -1)
+    return 1;	/* stop */
+
+  return cmid == mid && stop_exception == EXC_BREAKPOINT;
+}
+#endif /* THREAD_ALLOWED_TO_BREAK */
+
+#ifdef THREAD_PARSE_ID
+/*
+ * Map a thread id string (MID or a @SLOTNUMBER)
+ * to a thread-id.
+ *
+ *   0  matches all threads.
+ *   Otherwise the meaning is defined only in this file.
+ *   (mach_thread_for_breakpoint uses it)
+ *
+ * @@ This allows non-existent MIDs to be specified.
+ *    It now also allows non-existent slots to be
+ *    specified. (Slot numbers stored are negative,
+ *    and the magnitude is one greater than the actual
+ *    slot index. (Since 0 is reserved))
+ */
+int
+mach_thread_parse_id (arg)
+     char *arg;
+{
+  int mid;
+  if (arg == 0)
+    error ("thread id excpected");
+  mid = parse_thread_id (arg, 0, 1);
+
+  return mid;
+}
+#endif /* THREAD_PARSE_ID */
+
+#ifdef THREAD_OUTPUT_ID
+char *
+mach_thread_output_id (mid)
+     int mid;
+{
+  static char foobar [20];
+
+  if (mid > 0)
+    sprintf (foobar, "mid %d", mid);
+  else if (mid < 0)
+    sprintf (foobar, "@%d", -(mid+1));
+  else
+    sprintf (foobar, "*any thread*");
+
+  return foobar;
+}
+#endif /* THREAD_OUTPUT_ID */
+
+/* Called with hook PREPARE_TO_PROCEED() from infrun.c.
+ *
+ * If we have switched threads and stopped at breakpoint return 1 otherwise 0.
+ *
+ *  if SELECT_IT is nonzero, reselect the thread that was active when
+ *  we stopped at a breakpoint.
+ *
+ */
+
+mach3_prepare_to_proceed (select_it)
+     int select_it;
+{
+  if (stop_thread &&
+      stop_thread != current_thread &&
+      stop_exception == EXC_BREAKPOINT)
+    {
+      int mid;
+
+      if (! select_it)
+	return 1;
+
+      mid = switch_to_thread (stop_thread);
+
+      return 1;
+    }
+
+  return 0;
+}
+
+/* this stuff here is an upcall via libmach/excServer.c 
+   and mach_really_wait which does the actual upcall.
+
+   The code will pass the exception to the inferior if:
+
+     - The task that signaled is not the inferior task
+       (e.g. when debugging another debugger)
+
+     - The user has explicitely requested to pass on the exceptions.
+       (e.g to the default unix exception handler, which maps
+	exceptions to signals, or the user has her own exception handler)
+
+     - If the thread that signaled is being single-stepped and it
+       has set it's own exception port and the exception is not
+       EXC_BREAKPOINT. (Maybe this is not desirable?)
+ */
+
+kern_return_t
+catch_exception_raise (port, thread, task, exception, code, subcode)
+     mach_port_t port;
+     thread_t thread;
+     task_t task;
+     int exception, code, subcode;
+{
+  kern_return_t ret;
+  boolean_t signal_thread;
+  int mid = map_port_name_to_mid (thread, MACH_TYPE_THREAD);
+
+  if (! MACH_PORT_VALID (thread))
+    {
+      /* If the exception was sent and thread dies before we
+	 receive it, THREAD will be MACH_PORT_DEAD
+       */
+
+      current_thread = thread = MACH_PORT_NULL;
+      error ("Received exception from nonexistent thread");
+    }
+
+  /* Check if the task died in transit.
+   * @@ Isn't the thread also invalid in such case?
+   */
+  if (! MACH_PORT_VALID (task))
+    {
+      current_thread = thread = MACH_PORT_NULL;
+      error ("Received exception from nonexistent task");
+    }
+
+  if (exception < 0 || exception > MAX_EXCEPTION)
+    fatal ("catch_exception_raise: unknown exception code %d thread %d",
+	   exception,
+	   mid);
+
+  if (! MACH_PORT_VALID (inferior_task))
+    error ("got an exception, but inferior_task is null or dead");
+  
+  stop_exception = exception;
+  stop_code      = code;
+  stop_subcode   = subcode;  
+  stop_thread    = thread;
+  
+  signal_thread = exception != EXC_BREAKPOINT       &&
+    		  port == singlestepped_thread_port &&
+		  MACH_PORT_VALID (thread_saved_exception_port);
+
+  /* If it was not our inferior or if we want to forward
+   * the exception to the inferior's handler, do it here
+   *
+   * Note: If you have forwarded EXC_BREAKPOINT I trust you know why.
+   */
+  if (task != inferior_task ||
+      signal_thread         ||
+      exception_map [exception].forward)
+    {
+      mach_port_t eport = inferior_old_exception_port;
+
+      if (signal_thread)
+	{
+	  /*
+	    GDB now forwards the exeption to thread's original handler,
+	    since the user propably knows what he is doing.
+	    Give a message, though.
+	   */
+
+	  mach3_exception_actions ((WAITTYPE *)NULL, TRUE, "Thread");
+	  eport = thread_saved_exception_port;
+	}
+
+      /* Send the exception to the original handler */
+      ret = exception_raise (eport,
+			     thread, 
+			     task,
+			     exception,
+			     code,
+			     subcode);
+
+      (void) mach_port_deallocate (mach_task_self (), task);
+      (void) mach_port_deallocate (mach_task_self (), thread);
+
+      /* If we come here, we don't want to trace any more, since we
+       * will never stop for tracing anyway.
+       */
+      discard_single_step (thread);
+
+      /* Do not stop the inferior */
+      return ret;
+    }
+  
+  /* Now gdb handles the exception */
+  stopped_in_exception = TRUE;
+
+  ret = task_suspend (task);
+  CHK ("Error suspending inferior after exception", ret);
+
+  must_suspend_thread = 0;
+
+  if (current_thread != thread)
+    {
+      if (MACH_PORT_VALID (singlestepped_thread_port))
+	/* Cleanup discards single stepping */
+	error ("Exception from thread %d while singlestepping thread %d",
+	       mid,
+	       map_port_name_to_mid (current_thread, MACH_TYPE_THREAD));
+      
+      /* Then select the thread that caused the exception */
+      if (select_thread (inferior_task, mid, 0) != KERN_SUCCESS)
+	error ("Could not select thread %d causing exception", mid);
+      else
+	warning ("Gdb selected thread %d", mid);
+    }
+
+  /* If we receive an exception that is not breakpoint
+   * exception, we interrupt the single step and return to
+   * debugger. Trace condition is cleared.
+   */
+  if (MACH_PORT_VALID (singlestepped_thread_port))
+    {
+      if (stop_exception != EXC_BREAKPOINT)
+	warning ("Single step interrupted by exception");
+      else if (port == singlestepped_thread_port)
+	{
+	  /* Single step exception occurred, remove trace bit
+	   * and return to gdb.
+	   */
+	  if (! MACH_PORT_VALID (current_thread))
+	    error ("Single stepped thread is not valid");
+	
+	  /* Resume threads, but leave the task suspended */
+	  resume_all_threads (0);
+	}
+      else
+	warning ("Breakpoint while single stepping?");
+
+      discard_single_step (current_thread);
+    }
+  
+  (void) mach_port_deallocate (mach_task_self (), task);
+  (void) mach_port_deallocate (mach_task_self (), thread);
+
+  return KERN_SUCCESS;
+}
+
+int
+port_valid (port, mask)
+  mach_port_t port;
+  int         mask;
+{
+  kern_return_t ret;
+  mach_port_type_t type;
+
+  ret = mach_port_type (mach_task_self (),
+			port,
+			&type);
+  if (ret != KERN_SUCCESS || (type & mask) != mask)
+    return 0;
+  return 1;
+}
+
+/* @@ No vm read cache implemented yet */
+boolean_t vm_read_cache_valid = FALSE;
+
+/*
+ * Read inferior task's LEN bytes from ADDR and copy it to MYADDR
+ * in gdb's address space.
+ *
+ * Return 0 on failure; number of bytes read otherwise.
+ */
+int
+mach3_read_inferior (addr, myaddr, length)
+     CORE_ADDR addr;
+     char *myaddr;
+     int length;
+{
+  kern_return_t ret;
+  vm_address_t low_address       = (vm_address_t) trunc_page (addr);
+  vm_size_t    aligned_length = 
+    			(vm_size_t) round_page (addr+length) - low_address;
+  pointer_t    copied_memory;
+  int	       copy_count;
+
+  /* Get memory from inferior with page aligned addresses */
+  ret = vm_read (inferior_task,
+		 low_address,
+		 aligned_length,
+		 &copied_memory,
+		 &copy_count);
+  if (ret != KERN_SUCCESS)
+    {
+      /* the problem is that the inferior might be killed for whatever reason
+       * before we go to mach_really_wait. This is one place that ought to
+       * catch many of those errors.
+       * @@ A better fix would be to make all external events to GDB
+       * to arrive via a SINGLE port set. (Including user input!)
+       */
+
+      if (! port_valid (inferior_task, MACH_PORT_TYPE_SEND))
+	{
+	  m3_kill_inferior ();
+	  error ("Inferior killed (task port invalid)");
+	}
+      else
+	{
+#ifdef OSF
+	  extern int errno;
+	  /* valprint.c gives nicer format if this does not
+	     screw it. Eamonn seems to like this, so I enable
+	     it if OSF is defined...
+	   */
+	  warning ("[read inferior %x failed: %s]",
+		   addr, mach_error_string (ret));
+	  errno = 0;
+#endif
+	  return 0;
+	}
+    }
+
+  memcpy (myaddr, (char *)addr - low_address + copied_memory, length);
+
+  ret = vm_deallocate (mach_task_self (),
+		       copied_memory,
+		       copy_count);
+  CHK("mach3_read_inferior vm_deallocate failed", ret);
+
+  return length;
+}
+
+#ifdef __STDC__
+#define CHK_GOTO_OUT(str,ret) \
+  do if (ret != KERN_SUCCESS) { errstr = #str; goto out; } while(0)
+#else
+#define CHK_GOTO_OUT(str,ret) \
+  do if (ret != KERN_SUCCESS) { errstr = str; goto out; } while(0)
+#endif
+
+struct vm_region_list {
+  struct vm_region_list *next;
+  vm_prot_t	protection;
+  vm_address_t  start;
+  vm_size_t	length;
+};
+
+struct obstack  region_obstack;
+
+/*
+ * Write inferior task's LEN bytes from ADDR and copy it to MYADDR
+ * in gdb's address space.
+ */
+int
+mach3_write_inferior (addr, myaddr, length)
+     CORE_ADDR addr;
+     char *myaddr;
+     int length;
+{
+  kern_return_t ret;
+  vm_address_t low_address       = (vm_address_t) trunc_page (addr);
+  vm_size_t    aligned_length = 
+    			(vm_size_t) round_page (addr+length) - low_address;
+  pointer_t    copied_memory;
+  int	       copy_count;
+  int	       deallocate = 0;
+
+  char         *errstr = "Bug in mach3_write_inferior";
+
+  struct vm_region_list *region_element;
+  struct vm_region_list *region_head = (struct vm_region_list *)NULL;
+
+  /* Get memory from inferior with page aligned addresses */
+  ret = vm_read (inferior_task,
+		 low_address,
+		 aligned_length,
+		 &copied_memory,
+		 &copy_count);
+  CHK_GOTO_OUT ("mach3_write_inferior vm_read failed", ret);
+
+  deallocate++;
+
+  memcpy ((char *)addr - low_address + copied_memory, myaddr, length);
+
+  obstack_init (&region_obstack);
+
+  /* Do writes atomically.
+   * First check for holes and unwritable memory.
+   */
+  {
+    vm_size_t    remaining_length  = aligned_length;
+    vm_address_t region_address    = low_address;
+
+    struct vm_region_list *scan;
+
+    while(region_address < low_address + aligned_length)
+      {
+	vm_prot_t protection;
+	vm_prot_t max_protection;
+	vm_inherit_t inheritance;
+	boolean_t shared;
+	mach_port_t object_name;
+	vm_offset_t offset;
+	vm_size_t   region_length = remaining_length;
+	vm_address_t old_address  = region_address;
+    
+	ret = vm_region (inferior_task,
+			 &region_address,
+			 &region_length,
+			 &protection,
+			 &max_protection,
+			 &inheritance,
+			 &shared,
+			 &object_name,
+			 &offset);
+	CHK_GOTO_OUT ("vm_region failed", ret);
+
+	/* Check for holes in memory */
+	if (old_address != region_address)
+	  {
+	    warning ("No memory at 0x%x. Nothing written",
+		     old_address);
+	    ret = KERN_SUCCESS;
+	    length = 0;
+	    goto out;
+	  }
+
+	if (!(max_protection & VM_PROT_WRITE))
+	  {
+	    warning ("Memory at address 0x%x is unwritable. Nothing written",
+		     old_address);
+	    ret = KERN_SUCCESS;
+	    length = 0;
+	    goto out;
+	  }
+
+	/* Chain the regions for later use */
+	region_element = 
+	  (struct vm_region_list *)
+	    obstack_alloc (&region_obstack, sizeof (struct vm_region_list));
+    
+	region_element->protection = protection;
+	region_element->start      = region_address;
+	region_element->length     = region_length;
+
+	/* Chain the regions along with protections */
+	region_element->next = region_head;
+	region_head          = region_element;
+	
+	region_address += region_length;
+	remaining_length = remaining_length - region_length;
+      }
+
+    /* If things fail after this, we give up.
+     * Somebody is messing up inferior_task's mappings.
+     */
+    
+    /* Enable writes to the chained vm regions */
+    for (scan = region_head; scan; scan = scan->next)
+      {
+	boolean_t protection_changed = FALSE;
+	
+	if (!(scan->protection & VM_PROT_WRITE))
+	  {
+	    ret = vm_protect (inferior_task,
+			      scan->start,
+			      scan->length,
+			      FALSE,
+			      scan->protection | VM_PROT_WRITE);
+	    CHK_GOTO_OUT ("vm_protect: enable write failed", ret);
+	  }
+      }
+
+    ret = vm_write (inferior_task,
+		    low_address,
+		    copied_memory,
+		    aligned_length);
+    CHK_GOTO_OUT ("vm_write failed", ret);
+	
+    /* Set up the original region protections, if they were changed */
+    for (scan = region_head; scan; scan = scan->next)
+      {
+	boolean_t protection_changed = FALSE;
+	
+	if (!(scan->protection & VM_PROT_WRITE))
+	  {
+	    ret = vm_protect (inferior_task,
+			      scan->start,
+			      scan->length,
+			      FALSE,
+			      scan->protection);
+	    CHK_GOTO_OUT ("vm_protect: enable write failed", ret);
+	  }
+      }
+  }
+
+ out:
+  if (deallocate)
+    {
+      obstack_free (&region_obstack, 0);
+      
+      (void) vm_deallocate (mach_task_self (),
+			    copied_memory,
+			    copy_count);
+    }
+
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("%s %s", errstr, mach_error_string (ret));
+      return 0;
+    }
+
+  return length;
+}
+
+/* Return 0 on failure, number of bytes handled otherwise.  */
+static int
+m3_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* IGNORED */
+{
+  int result;
+
+  if (write)
+    result = mach3_write_inferior (memaddr, myaddr, len);
+  else
+    result = mach3_read_inferior  (memaddr, myaddr, len);
+
+  return result;
+}
+
+
+static char *
+translate_state(state)
+int	state;
+{
+  switch (state) {
+  case TH_STATE_RUNNING:	return("R");
+  case TH_STATE_STOPPED:	return("S");
+  case TH_STATE_WAITING:	return("W");
+  case TH_STATE_UNINTERRUPTIBLE: return("U");
+  case TH_STATE_HALTED:		return("H");
+  default:			return("?");
+  }
+}
+
+static char *
+translate_cstate (state)
+     int state;
+{
+  switch (state)
+    {
+    case CPROC_RUNNING:	return "R";
+    case CPROC_SWITCHING: return "S";
+    case CPROC_BLOCKED: return "B";
+    case CPROC_CONDWAIT: return "C";
+    case CPROC_CONDWAIT|CPROC_SWITCHING: return "CS";
+    default: return "?";
+    }
+}
+
+/* type == MACH_MSG_TYPE_COPY_SEND || type == MACH_MSG_TYPE_MAKE_SEND */
+
+mach_port_t           /* no mach_port_name_t found in include files. */
+map_inferior_port_name (inferior_name, type)
+     mach_port_t inferior_name;
+     mach_msg_type_name_t type;
+{
+  kern_return_t        ret;
+  mach_msg_type_name_t acquired;
+  mach_port_t          iport;
+  
+  ret = mach_port_extract_right (inferior_task,
+				 inferior_name,
+				 type,
+				 &iport,
+				 &acquired);
+  CHK("mach_port_extract_right (map_inferior_port_name)", ret);
+
+  if (acquired != MACH_MSG_TYPE_PORT_SEND)
+    error("Incorrect right extracted, (map_inferior_port_name)");
+
+  ret = mach_port_deallocate (mach_task_self (),
+			      iport);
+  CHK ("Deallocating mapped port (map_inferior_port_name)", ret);
+
+  return iport;
+}
+
+/*
+ * Naming convention:
+ *  Always return user defined name if found.
+ *  _K == A kernel thread with no matching CPROC
+ *  _C == A cproc with no current cthread
+ *  _t == A cthread with no user defined name
+ *
+ * The digits that follow the _names are the SLOT number of the
+ * kernel thread if there is such a thing, otherwise just a negation
+ * of the sequential number of such cprocs.
+ */
+
+static char buf[7];
+
+static char *
+get_thread_name (one_cproc, id)
+     gdb_thread_t one_cproc;
+     int id;
+{
+  if (one_cproc)
+    if (one_cproc->cthread == NULL)
+      {
+	/* cproc not mapped to any cthread */
+	sprintf(buf, "_C%d", id);
+      }
+    else if (! one_cproc->cthread->name)
+      {
+	/* cproc and cthread, but no name */
+	sprintf(buf, "_t%d", id);
+      }
+    else
+      return (char *)(one_cproc->cthread->name);
+  else
+    {
+      if (id < 0)
+	warning ("Inconsistency in thread name id %d", id);
+
+      /* Kernel thread without cproc */
+      sprintf(buf, "_K%d", id);
+    }
+
+  return buf;
+}
+
+int
+fetch_thread_info (task, mthreads_out)
+     mach_port_t	task;
+     gdb_thread_t	*mthreads_out;	/* out */
+{
+  kern_return_t  ret;
+  thread_array_t th_table;
+  int		 th_count;
+  gdb_thread_t mthreads = NULL;
+  int 		 index;
+
+  ret = task_threads (task, &th_table, &th_count);
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("Error getting inferior's thread list:%s",
+	       mach_error_string(ret));
+      m3_kill_inferior ();
+      return -1;
+    }
+  
+  mthreads = (gdb_thread_t)
+    		obstack_alloc
+		  (cproc_obstack,
+		   th_count * sizeof (struct gdb_thread));
+
+  for (index = 0; index < th_count; index++)
+    {
+      thread_t saved_thread = MACH_PORT_NULL;
+      int mid;
+
+      if (must_suspend_thread)
+	setup_thread (th_table[ index ], 1);
+
+      if (th_table[index] != current_thread)
+	{
+	  saved_thread = current_thread;
+	  
+	  mid = switch_to_thread (th_table[ index ]);
+	}
+
+      mthreads[index].name  = th_table[index];
+      mthreads[index].cproc = NULL;	/* map_cprocs_to_kernel_threads() */
+      mthreads[index].in_emulator = FALSE;
+      mthreads[index].slotid = index;
+      
+      mthreads[index].sp = read_register (SP_REGNUM);
+      mthreads[index].fp = read_register (FP_REGNUM);
+      mthreads[index].pc = read_pc ();
+
+      if (MACH_PORT_VALID (saved_thread))
+	mid = switch_to_thread (saved_thread);
+
+      if (must_suspend_thread)
+	setup_thread (th_table[ index ], 0);
+    }
+  
+  consume_send_rights (th_table, th_count);
+  ret = vm_deallocate (mach_task_self(), (vm_address_t)th_table, 
+		       (th_count * sizeof(mach_port_t)));
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("Error trying to deallocate thread list : %s",
+	       mach_error_string (ret));
+    }
+
+  *mthreads_out = mthreads;
+
+  return th_count;
+}
+
+
+/*
+ * Current emulator always saves the USP on top of
+ * emulator stack below struct emul_stack_top stuff.
+ */
+CORE_ADDR
+fetch_usp_from_emulator_stack (sp)
+     CORE_ADDR sp;
+{
+  CORE_ADDR stack_pointer;
+
+  sp = (sp & ~(EMULATOR_STACK_SIZE-1)) +
+    	EMULATOR_STACK_SIZE - sizeof (struct emul_stack_top);
+  
+  if (mach3_read_inferior (sp,
+			   &stack_pointer,
+			   sizeof (CORE_ADDR)) != sizeof (CORE_ADDR))
+    {
+      warning ("Can't read user sp from emulator stack address 0x%x", sp);
+      return 0;
+    }
+
+  return stack_pointer;
+}
+
+#ifdef MK67
+
+/* get_emulation_vector() interface was changed after mk67 */
+#define EMUL_VECTOR_COUNT 400	/* Value does not matter too much */
+
+#endif /* MK67 */
+
+/* Check if the emulator exists at task's address space.
+ */
+boolean_t
+have_emulator_p (task)
+     task_t task;
+{
+  kern_return_t	ret;
+#ifndef EMUL_VECTOR_COUNT
+  vm_offset_t	*emulation_vector;
+  int		n;
+#else
+  vm_offset_t	emulation_vector[ EMUL_VECTOR_COUNT ];
+  int		n = EMUL_VECTOR_COUNT;
+#endif
+  int		i;
+  int		vector_start;
+  
+  ret = task_get_emulation_vector (task,
+				   &vector_start,
+#ifndef EMUL_VECTOR_COUNT
+				   &emulation_vector,
+#else
+				   emulation_vector,
+#endif
+				   &n);
+  CHK("task_get_emulation_vector", ret);
+  xx_debug ("%d vectors from %d at 0x%08x\n",
+	    n, vector_start, emulation_vector);
+  
+  for(i = 0; i < n; i++)
+    {
+      vm_offset_t entry = emulation_vector [i];
+
+      if (EMULATOR_BASE <= entry && entry <= EMULATOR_END)
+	return TRUE;
+      else if (entry)
+	{
+	  static boolean_t informed = FALSE;
+	  if (!informed)
+	    {
+	      warning("Emulation vector address 0x08%x outside emulator space",
+		      entry);
+	      informed = TRUE;
+	    }
+	}
+    }
+  return FALSE;
+}
+
+/* Map cprocs to kernel threads and vice versa.  */
+
+void
+map_cprocs_to_kernel_threads (cprocs, mthreads, thread_count)
+     gdb_thread_t cprocs;
+     gdb_thread_t mthreads;
+     int thread_count;
+{
+  int index;
+  gdb_thread_t scan;
+  boolean_t all_mapped = TRUE;
+  LONGEST stack_base;
+  LONGEST stack_size;
+
+  for (scan = cprocs; scan; scan = scan->next)
+    {
+      /* Default to: no kernel thread for this cproc */
+      scan->reverse_map = -1;
+
+      /* Check if the cproc is found by its stack */
+      for (index = 0; index < thread_count; index++)
+	{
+	  stack_base =
+	    extract_signed_integer (scan->raw_cproc + CPROC_BASE_OFFSET,
+				    CPROC_BASE_SIZE);
+	  stack_size = 
+	    extract_signed_integer (scan->raw_cproc + CPROC_SIZE_OFFSET,
+				    CPROC_SIZE_SIZE);
+	  if ((mthreads + index)->sp > stack_base &&
+	      (mthreads + index)->sp <= stack_base + stack_size)
+	    {
+	      (mthreads + index)->cproc = scan;
+	      scan->reverse_map = index;
+	      break;
+	    }
+	}
+      all_mapped &= (scan->reverse_map != -1);
+    }
+
+  /* Check for threads that are currently in the emulator.
+   * If so, they have a different stack, and the still unmapped
+   * cprocs may well get mapped to these threads.
+   * 
+   * If:
+   *  - cproc stack does not match any kernel thread stack pointer
+   *  - there is at least one extra kernel thread
+   *    that has no cproc mapped above.
+   *  - some kernel thread stack pointer points to emulator space
+   *  then we find the user stack pointer saved in the emulator
+   *  stack, and try to map that to the cprocs.
+   *
+   * Also set in_emulator for kernel threads.
+   */ 
+
+  if (emulator_present)
+    {
+      for (index = 0; index < thread_count; index++)
+	{
+	  CORE_ADDR emul_sp;
+	  CORE_ADDR usp;
+
+	  gdb_thread_t mthread = (mthreads+index);
+	  emul_sp = mthread->sp;
+
+	  if (mthread->cproc == NULL &&
+	      EMULATOR_BASE <= emul_sp && emul_sp <= EMULATOR_END)
+	    {
+	      mthread->in_emulator = emulator_present;
+	      
+	      if (!all_mapped && cprocs)
+		{
+		  usp = fetch_usp_from_emulator_stack (emul_sp);
+		  
+		  /* @@ Could be more accurate */
+		  if (! usp)
+		    error ("Zero stack pointer read from emulator?");
+		  
+		  /* Try to match this stack pointer to the cprocs that
+		   * don't yet have a kernel thread.
+		   */
+		  for (scan = cprocs; scan; scan = scan->next)
+		    {
+		      
+		      /* Check is this unmapped CPROC stack contains
+		       * the user stack pointer saved in the
+		       * emulator.
+		       */
+		      if (scan->reverse_map == -1)
+			{
+			  stack_base =
+			    extract_signed_integer
+			      (scan->raw_cproc + CPROC_BASE_OFFSET,
+			       CPROC_BASE_SIZE);
+			  stack_size = 
+			    extract_signed_integer
+			      (scan->raw_cproc + CPROC_SIZE_OFFSET,
+			       CPROC_SIZE_SIZE);
+			  if (usp > stack_base &&
+			      usp <= stack_base + stack_size)
+			    {
+			      mthread->cproc = scan;
+			      scan->reverse_map = index;
+			      break;
+			    }
+			}
+		    }
+		}
+	    }
+	}
+    }
+}
+
+/*
+ * Format of the thread_list command
+ *
+ * 	             slot mid sel   name  emul ks susp  cstate wired   address
+ */
+#define TL_FORMAT "%-2.2s %5d%c %-10.10s %1.1s%s%-5.5s %-2.2s %-5.5s "
+
+#define TL_HEADER "\n@    MID  Name        KState CState   Where\n"
+
+void
+print_tl_address (stream, pc)
+     GDB_FILE *stream;
+     CORE_ADDR pc;
+{
+  if (! lookup_minimal_symbol_by_pc (pc))
+    fprintf_filtered (stream, local_hex_format(), pc);
+  else
+    {
+      extern int addressprint;
+      extern int asm_demangle;
+
+      int store    = addressprint;
+      addressprint = 0;
+      print_address_symbolic (pc, stream, asm_demangle, "");
+      addressprint = store;
+    }
+}
+
+/* For thread names, but also for gdb_message_port external name */
+#define MAX_NAME_LEN 50
+
+/* Returns the address of variable NAME or 0 if not found */
+CORE_ADDR
+lookup_address_of_variable (name)
+     char *name;
+{
+  struct symbol *sym;
+  CORE_ADDR symaddr = 0;
+  struct minimal_symbol *msymbol;
+
+  sym = lookup_symbol (name,
+		       (struct block *)NULL,
+		       VAR_NAMESPACE,
+		       (int *)NULL,
+		       (struct symtab **)NULL);
+
+  if (sym)
+    symaddr = SYMBOL_VALUE (sym);
+
+  if (! symaddr)
+    {
+      msymbol = lookup_minimal_symbol (name, NULL, NULL);
+
+      if (msymbol && msymbol->type == mst_data)
+	symaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+    }
+
+  return symaddr;
+}
+
+static gdb_thread_t
+get_cprocs()
+{
+  gdb_thread_t cproc_head;
+  gdb_thread_t cproc_copy;
+  CORE_ADDR their_cprocs;
+  char *buf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+  char *name;
+  cthread_t cthread;
+  CORE_ADDR symaddr;
+  
+  symaddr = lookup_address_of_variable ("cproc_list");
+
+  if (! symaddr)
+    {
+      /* cproc_list is not in a file compiled with debugging
+	 symbols, but don't give up yet */
+
+      symaddr = lookup_address_of_variable ("cprocs");
+
+      if (symaddr)
+	{
+	  static int informed = 0;
+	  if (!informed)
+	    {
+	      informed++;
+	      warning ("Your program is loaded with an old threads library.");
+	      warning ("GDB does not know the old form of threads");
+	      warning ("so things may not work.");
+	    }
+	}
+    }
+
+  /* Stripped or no -lthreads loaded or "cproc_list" is in wrong segment. */
+  if (! symaddr)
+    return NULL;
+
+  /* Get the address of the first cproc in the task */
+  if (!mach3_read_inferior (symaddr,
+			    buf,
+			    TARGET_PTR_BIT / HOST_CHAR_BIT))
+    error ("Can't read cproc master list at address (0x%x).", symaddr);
+  their_cprocs = extract_address (buf, TARGET_PTR_BIT / HOST_CHAR_BIT);
+
+  /* Scan the CPROCs in the task.
+     CPROCs are chained with LIST field, not NEXT field, which
+     chains mutexes, condition variables and queues */
+
+  cproc_head = NULL;
+
+  while (their_cprocs != (CORE_ADDR)0)
+    {
+      CORE_ADDR cproc_copy_incarnation;
+      cproc_copy = (gdb_thread_t) obstack_alloc (cproc_obstack,
+						 sizeof (struct gdb_thread));
+
+      if (!mach3_read_inferior (their_cprocs,
+				&cproc_copy->raw_cproc[0],
+				CPROC_SIZE))
+	error("Can't read next cproc at 0x%x.", their_cprocs);
+
+      their_cprocs =
+	extract_address (cproc_copy->raw_cproc + CPROC_LIST_OFFSET,
+			 CPROC_LIST_SIZE);
+      cproc_copy_incarnation =
+	extract_address (cproc_copy->raw_cproc + CPROC_INCARNATION_OFFSET,
+			 CPROC_INCARNATION_SIZE);
+
+      if (cproc_copy_incarnation == (CORE_ADDR)0)
+	cproc_copy->cthread = NULL;
+      else
+	{
+	  /* This CPROC has an attached CTHREAD. Get its name */
+	  cthread = (cthread_t)obstack_alloc (cproc_obstack,
+					      sizeof(struct cthread));
+
+	  if (!mach3_read_inferior (cproc_copy_incarnation,
+				    cthread,
+				    sizeof(struct cthread)))
+	    error("Can't read next thread at 0x%x.",
+		  cproc_copy_incarnation);
+
+	  cproc_copy->cthread = cthread;
+
+	  if (cthread->name)
+	    {
+	      name = (char *) obstack_alloc (cproc_obstack, MAX_NAME_LEN);
+
+	      if (!mach3_read_inferior(cthread->name, name, MAX_NAME_LEN))
+		error("Can't read next thread's name at 0x%x.", cthread->name);
+
+	      cthread->name = name;
+	    }
+	}
+
+      /* insert in front */
+      cproc_copy->next = cproc_head;
+      cproc_head = cproc_copy;
+    }
+  return cproc_head;
+}
+
+#ifndef FETCH_CPROC_STATE
+/*
+ * Check if your machine does not grok the way this routine
+ * fetches the FP,PC and SP of a cproc that is not
+ * currently attached to any kernel thread (e.g. its cproc.context
+ * field points to the place in stack where the context
+ * is saved).
+ *
+ * If it doesn't, define your own routine.
+ */
+#define FETCH_CPROC_STATE(mth) mach3_cproc_state (mth)
+
+int
+mach3_cproc_state (mthread)
+     gdb_thread_t mthread;
+{
+  int context;
+
+  if (! mthread || !mthread->cproc)
+    return -1;
+
+  context = extract_signed_integer
+    (mthread->cproc->raw_cproc + CPROC_CONTEXT_OFFSET,
+     CPROC_CONTEXT_SIZE);
+  if (context == 0)
+    return -1;
+
+  mthread->sp = context + MACHINE_CPROC_SP_OFFSET;
+
+  if (mach3_read_inferior (context + MACHINE_CPROC_PC_OFFSET,
+			   &mthread->pc,
+			   sizeof (CORE_ADDR)) != sizeof (CORE_ADDR))
+    {
+      warning ("Can't read cproc pc from inferior");
+      return -1;
+    }
+
+  if (mach3_read_inferior (context + MACHINE_CPROC_FP_OFFSET,
+			   &mthread->fp,
+			   sizeof (CORE_ADDR)) != sizeof (CORE_ADDR))
+    {
+      warning ("Can't read cproc fp from inferior");
+      return -1;
+    }
+
+  return 0;
+}
+#endif /* FETCH_CPROC_STATE */
+
+
+void
+thread_list_command()
+{
+  thread_basic_info_data_t ths;
+  int     thread_count;
+  gdb_thread_t cprocs;
+  gdb_thread_t scan;
+  int     index;
+  char   *name;
+  char    selected;
+  char   *wired;
+  int     infoCnt;
+  kern_return_t ret;
+  mach_port_t   mid_or_port;
+  gdb_thread_t  their_threads;
+  gdb_thread_t  kthread;
+
+  int neworder = 1;
+
+  char *fmt = "There are %d kernel threads in task %d.\n";
+  
+  int tmid = map_port_name_to_mid (inferior_task, MACH_TYPE_TASK);
+  
+  MACH_ERROR_NO_INFERIOR;
+  
+  thread_count = fetch_thread_info (inferior_task,
+				    &their_threads);
+  if (thread_count == -1)
+    return;
+  
+  if (thread_count == 1)
+    fmt = "There is %d kernel thread in task %d.\n";
+  
+  printf_filtered (fmt, thread_count, tmid);
+  
+  puts_filtered (TL_HEADER);
+  
+  cprocs = get_cprocs();
+  
+  map_cprocs_to_kernel_threads (cprocs, their_threads, thread_count);
+  
+  for (scan = cprocs; scan; scan = scan->next)
+    {
+      int mid;
+      char buf[10];
+      char slot[3];
+      int cproc_state =
+	extract_signed_integer
+	  (scan->raw_cproc + CPROC_STATE_OFFSET, CPROC_STATE_SIZE);
+      
+      selected = ' ';
+      
+      /* a wired cproc? */
+      wired = (extract_address (scan->raw_cproc + CPROC_WIRED_OFFSET,
+				CPROC_WIRED_SIZE)
+	       ? "wired" : "");
+
+      if (scan->reverse_map != -1)
+	kthread  = (their_threads + scan->reverse_map);
+      else
+	kthread  = NULL;
+
+      if (kthread)
+	{
+	  /* These cprocs have a kernel thread */
+	  
+	  mid = map_port_name_to_mid (kthread->name, MACH_TYPE_THREAD);
+	  
+	  infoCnt = THREAD_BASIC_INFO_COUNT;
+	  
+	  ret = thread_info (kthread->name,
+			     THREAD_BASIC_INFO,
+			     (thread_info_t)&ths,
+			     &infoCnt);
+	  
+	  if (ret != KERN_SUCCESS)
+	    {
+	      warning ("Unable to get basic info on thread %d : %s",
+		       mid,
+		       mach_error_string (ret));
+	      continue;
+	    }
+
+	  /* Who is the first to have more than 100 threads */
+	  sprintf (slot, "%d", kthread->slotid%100);
+
+	  if (kthread->name == current_thread)
+	    selected = '*';
+	  
+	  if (ths.suspend_count)
+	    sprintf (buf, "%d", ths.suspend_count);
+	  else
+	    buf[0] = '\000';
+
+#if 0
+	  if (ths.flags & TH_FLAGS_SWAPPED)
+	    strcat (buf, "S");
+#endif
+
+	  if (ths.flags & TH_FLAGS_IDLE)
+	    strcat (buf, "I");
+
+	  printf_filtered (TL_FORMAT,
+			   slot,
+			   mid,
+			   selected,
+			   get_thread_name (scan, kthread->slotid),
+			   kthread->in_emulator ? "E" : "",
+			   translate_state (ths.run_state),
+			   buf,
+			   translate_cstate (cproc_state),
+			   wired);
+	  print_tl_address (gdb_stdout, kthread->pc);
+	}
+      else
+	{
+	  /* These cprocs don't have a kernel thread.
+	   * find out the calling frame with 
+	   * FETCH_CPROC_STATE.
+	   */
+
+	  struct gdb_thread state;
+
+#if 0
+	  /* jtv -> emcmanus: why do you want this here? */
+	  if (scan->incarnation == NULL)
+	    continue; /* EMcM */
+#endif
+
+	  printf_filtered (TL_FORMAT,
+			   "-",
+			   -neworder,	/* Pseudo MID */
+			   selected,
+			   get_thread_name (scan, -neworder),
+			   "",
+			   "-",	/* kernel state */
+			   "",
+			   translate_cstate (cproc_state),
+			   "");
+	  state.cproc = scan;
+
+	  if (FETCH_CPROC_STATE (&state) == -1)
+	    puts_filtered ("???");
+	  else
+	    print_tl_address (gdb_stdout, state.pc);
+
+	  neworder++;
+	}
+      puts_filtered ("\n");
+    }
+  
+  /* Scan for kernel threads without cprocs */
+  for (index = 0; index < thread_count; index++)
+    {
+      if (! their_threads[index].cproc)
+	{
+	  int mid;
+	  
+	  char buf[10];
+	  char slot[3];
+
+	  mach_port_t name = their_threads[index].name;
+	  
+	  mid = map_port_name_to_mid (name, MACH_TYPE_THREAD);
+	  
+	  infoCnt = THREAD_BASIC_INFO_COUNT;
+	  
+	  ret = thread_info(name,
+			    THREAD_BASIC_INFO,
+			    (thread_info_t)&ths,
+			    &infoCnt);
+	    
+	  if (ret != KERN_SUCCESS)
+	    {
+	      warning ("Unable to get basic info on thread %d : %s",
+		       mid,
+		       mach_error_string (ret));
+	      continue;
+	    }
+
+	  sprintf (slot, "%d", index%100);
+
+	  if (name == current_thread)
+	    selected = '*';
+	  else
+	    selected = ' ';
+
+	  if (ths.suspend_count)
+	    sprintf (buf, "%d", ths.suspend_count);
+	  else
+	    buf[0] = '\000';
+
+#if 0
+	  if (ths.flags & TH_FLAGS_SWAPPED)
+	    strcat (buf, "S");
+#endif
+
+	  if (ths.flags & TH_FLAGS_IDLE)
+	    strcat (buf, "I");
+
+	  printf_filtered (TL_FORMAT,
+			   slot,
+			   mid,
+			   selected,
+			   get_thread_name (NULL, index),
+			   their_threads[index].in_emulator ? "E" : "",
+			   translate_state (ths.run_state),
+			   buf,
+			   "",   /* No cproc state */
+			   "");	/* Can't be wired */
+	  print_tl_address (gdb_stdout, their_threads[index].pc);
+	  puts_filtered ("\n");
+	}
+    }
+  
+  obstack_free (cproc_obstack, 0);
+  obstack_init (cproc_obstack);
+}
+
+void
+thread_select_command(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int mid;
+  thread_array_t thread_list;
+  int thread_count;
+  kern_return_t ret;
+  int is_slot = 0;
+
+  MACH_ERROR_NO_INFERIOR;
+
+  if (!args)
+    error_no_arg ("MID or @SLOTNUMBER to specify a thread to select");
+
+  while (*args == ' ' || *args == '\t')
+    args++;
+
+  if (*args == '@')
+    {
+      is_slot++;
+      args++;
+    }
+
+  mid = atoi(args);
+
+  if (mid == 0)
+    if (!is_slot || *args != '0') /* Rudimentary checks */
+      error ("You must select threads by MID or @SLOTNUMBER");
+
+  if (select_thread (inferior_task, mid, is_slot?2:1) != KERN_SUCCESS)
+    return;
+
+  if (from_tty)
+    printf_filtered ("Thread %d selected\n",
+		     is_slot ? map_port_name_to_mid (current_thread,
+						     MACH_TYPE_THREAD) : mid);
+}
+
+thread_trace (thread, set)
+mach_port_t thread;
+boolean_t   set;
+{
+  int			flavor   = TRACE_FLAVOR;
+  unsigned int		stateCnt = TRACE_FLAVOR_SIZE;
+  kern_return_t		ret;
+  thread_state_data_t	state;
+
+  if (! MACH_PORT_VALID (thread))
+    {
+      warning ("thread_trace: invalid thread");
+      return;
+    }
+
+  if (must_suspend_thread)
+    setup_thread (thread, 1);
+
+  ret = thread_get_state(thread, flavor, state, &stateCnt);
+  CHK ("thread_trace: error reading thread state", ret);
+  
+  if (set)
+    {
+      TRACE_SET (thread, state);
+    }
+  else
+    {
+      if (! TRACE_CLEAR (thread, state))
+	{
+	  if (must_suspend_thread)
+	    setup_thread (thread, 0);
+	  return;
+	}
+    }
+
+  ret = thread_set_state(thread, flavor, state, stateCnt);
+  CHK ("thread_trace: error writing thread state", ret);
+  if (must_suspend_thread)
+    setup_thread (thread, 0);
+}  
+
+#ifdef	FLUSH_INFERIOR_CACHE
+
+/* When over-writing code on some machines the I-Cache must be flushed
+   explicitly, because it is not kept coherent by the lazy hardware.
+   This definitely includes breakpoints, for instance, or else we
+   end up looping in mysterious Bpt traps */
+
+flush_inferior_icache(pc, amount)
+     CORE_ADDR pc;
+{
+  vm_machine_attribute_val_t flush = MATTR_VAL_ICACHE_FLUSH;
+  kern_return_t   ret;
+  
+  ret = vm_machine_attribute (inferior_task,
+			      pc,
+			      amount,
+			      MATTR_CACHE,
+			      &flush);
+  if (ret != KERN_SUCCESS)
+    warning ("Error flushing inferior's cache : %s",
+	     mach_error_string (ret));
+}
+#endif	FLUSH_INFERIOR_CACHE
+
+
+static
+suspend_all_threads (from_tty)
+     int from_tty;
+{
+  kern_return_t	   ret;
+  thread_array_t   thread_list;
+  int		   thread_count, index;
+  int		   infoCnt;
+  thread_basic_info_data_t th_info;
+
+  
+  ret = task_threads (inferior_task, &thread_list, &thread_count);
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("Could not suspend inferior threads.");
+      m3_kill_inferior ();
+      return_to_top_level (RETURN_ERROR);
+    }
+  
+  for (index = 0; index < thread_count; index++)
+    {
+      int mid;
+
+      mid = map_port_name_to_mid (thread_list[ index ],
+				  MACH_TYPE_THREAD);
+	  
+      ret = thread_suspend(thread_list[ index ]);
+
+      if (ret != KERN_SUCCESS)
+	warning ("Error trying to suspend thread %d : %s",
+		 mid, mach_error_string (ret));
+
+      if (from_tty)
+	{
+	  infoCnt = THREAD_BASIC_INFO_COUNT;
+	  ret = thread_info (thread_list[ index ],
+			     THREAD_BASIC_INFO,
+			     (thread_info_t) &th_info,
+			     &infoCnt);
+	  CHK ("suspend can't get thread info", ret);
+	  
+	  warning ("Thread %d suspend count is %d",
+		   mid, th_info.suspend_count);
+	}
+    }
+
+  consume_send_rights (thread_list, thread_count);
+  ret = vm_deallocate(mach_task_self(),
+		      (vm_address_t)thread_list, 
+		      (thread_count * sizeof(int)));
+  CHK ("Error trying to deallocate thread list", ret);
+}
+
+void
+thread_suspend_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  kern_return_t ret;
+  int           mid;
+  mach_port_t   saved_thread;
+  int           infoCnt;
+  thread_basic_info_data_t th_info;
+  
+  MACH_ERROR_NO_INFERIOR;
+
+  if (!strcasecmp (args, "all")) {
+    suspend_all_threads (from_tty);
+    return;
+  }
+
+  saved_thread = current_thread;
+
+  mid = parse_thread_id (args, 0, 0);
+
+  if (mid < 0)
+    error ("You can suspend only existing kernel threads with MID or @SLOTNUMBER");
+
+  if (mid == 0)
+    mid = map_port_name_to_mid (current_thread, MACH_TYPE_THREAD);
+  else
+    if (select_thread (inferior_task, mid, 0) != KERN_SUCCESS)
+      {
+	if (current_thread)
+	  current_thread = saved_thread;
+	error ("Could not select thread %d", mid);
+      }
+
+  ret = thread_suspend (current_thread);
+  if (ret != KERN_SUCCESS)
+    warning ("thread_suspend failed : %s",
+	     mach_error_string (ret));
+
+  infoCnt = THREAD_BASIC_INFO_COUNT;
+  ret = thread_info (current_thread,
+		     THREAD_BASIC_INFO,
+		     (thread_info_t) &th_info,
+		     &infoCnt);
+  CHK ("suspend can't get thread info", ret);
+  
+  warning ("Thread %d suspend count is %d", mid, th_info.suspend_count);
+  
+  current_thread = saved_thread;
+}
+
+resume_all_threads (from_tty)
+     int from_tty;
+{
+    kern_return_t  ret;
+    thread_array_t thread_list;
+    int		   thread_count, index;
+    int            mid;
+    int		   infoCnt;
+    thread_basic_info_data_t th_info;
+
+    ret = task_threads (inferior_task, &thread_list, &thread_count);
+    if (ret != KERN_SUCCESS)
+      {
+	m3_kill_inferior ();
+	error("task_threads", mach_error_string( ret));
+      }
+
+    for (index = 0; index < thread_count; index++)
+      {
+	infoCnt = THREAD_BASIC_INFO_COUNT;
+	ret = thread_info (thread_list [ index ],
+			   THREAD_BASIC_INFO,
+			   (thread_info_t) &th_info,
+			   &infoCnt);
+	CHK ("resume_all can't get thread info", ret);
+	
+	mid = map_port_name_to_mid (thread_list[ index ],
+				    MACH_TYPE_THREAD);
+	
+	if (! th_info.suspend_count)
+	  {
+	    if (mid != -1 && from_tty)
+	      warning ("Thread %d is not suspended", mid);
+	    continue;
+	  }
+
+	ret = thread_resume (thread_list[ index ]);
+
+	if (ret != KERN_SUCCESS)
+	  warning ("Error trying to resume thread %d : %s",
+		   mid, mach_error_string (ret));
+	else if (mid != -1 && from_tty)
+	  warning ("Thread %d suspend count is %d",
+		   mid, --th_info.suspend_count);
+      }
+
+    consume_send_rights (thread_list, thread_count);
+    ret = vm_deallocate(mach_task_self(),
+			(vm_address_t)thread_list, 
+			(thread_count * sizeof(int)));
+    CHK("Error trying to deallocate thread list", ret);
+}
+
+void
+thread_resume_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int mid;
+  mach_port_t saved_thread;
+  kern_return_t ret;
+  thread_basic_info_data_t th_info;
+  int infoCnt = THREAD_BASIC_INFO_COUNT;
+  
+  MACH_ERROR_NO_INFERIOR;
+
+  if (!strcasecmp (args, "all")) {
+    resume_all_threads (from_tty);
+    return;
+  }
+
+  saved_thread = current_thread;
+
+  mid = parse_thread_id (args, 0, 0);
+
+  if (mid < 0)
+    error ("You can resume only existing kernel threads with MID or @SLOTNUMBER");
+
+  if (mid == 0)
+    mid = map_port_name_to_mid (current_thread, MACH_TYPE_THREAD);
+  else
+    if (select_thread (inferior_task, mid, 0) != KERN_SUCCESS)
+      {
+	if (current_thread)
+	  current_thread = saved_thread;
+	return_to_top_level (RETURN_ERROR);
+      }
+
+  ret = thread_info (current_thread,
+		     THREAD_BASIC_INFO,
+		     (thread_info_t) &th_info,
+		     &infoCnt);
+  CHK ("resume can't get thread info", ret);
+  
+  if (! th_info.suspend_count)
+    {
+      warning ("Thread %d is not suspended", mid);
+      goto out;
+    }
+
+  ret = thread_resume (current_thread);
+  if (ret != KERN_SUCCESS)
+    warning ("thread_resume failed : %s",
+	     mach_error_string (ret));
+  else
+    {
+      th_info.suspend_count--;
+      warning ("Thread %d suspend count is %d", mid, th_info.suspend_count);
+    }
+      
+ out:
+  current_thread = saved_thread;
+}
+
+void
+thread_kill_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int mid;
+  kern_return_t ret;
+  int thread_count;
+  thread_array_t thread_table;
+  int   index;
+  mach_port_t thread_to_kill = MACH_PORT_NULL;
+  
+  
+  MACH_ERROR_NO_INFERIOR;
+
+  if (!args)
+    error_no_arg ("thread mid to kill from the inferior task");
+
+  mid = parse_thread_id (args, 0, 0);
+
+  if (mid < 0)
+    error ("You can kill only existing kernel threads with MID or @SLOTNUMBER");
+
+  if (mid)
+    {
+      ret = machid_mach_port (mid_server, mid_auth, mid, &thread_to_kill);
+      CHK ("thread_kill_command: machid_mach_port map failed", ret);
+    }
+  else
+    mid = map_port_name_to_mid (current_thread, MACH_TYPE_THREAD);
+      
+  /* Don't allow gdb to kill *any* thread in the system. Use mkill program for that */
+  ret = task_threads (inferior_task, &thread_table, &thread_count);
+  CHK ("Error getting inferior's thread list", ret);
+  
+  if (thread_to_kill == current_thread)
+    {
+      ret = thread_terminate (thread_to_kill);
+      CHK ("Thread could not be terminated", ret);
+
+      if (select_thread (inferior_task, 0, 1) != KERN_SUCCESS)
+	warning ("Last thread was killed, use \"kill\" command to kill task");
+    }
+  else
+    for (index = 0; index < thread_count; index++)
+      if (thread_table [ index ] == thread_to_kill)
+	{
+	  ret = thread_terminate (thread_to_kill);
+	  CHK ("Thread could not be terminated", ret);
+	}
+
+  if (thread_count > 1)
+    consume_send_rights (thread_table, thread_count);
+  
+  ret = vm_deallocate (mach_task_self(), (vm_address_t)thread_table, 
+		       (thread_count * sizeof(mach_port_t)));
+  CHK ("Error trying to deallocate thread list", ret);
+  
+  warning ("Thread %d killed", mid);
+}
+
+
+/* Task specific commands; add more if you like */
+
+void
+task_resume_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  kern_return_t ret;
+  task_basic_info_data_t ta_info;
+  int infoCnt = TASK_BASIC_INFO_COUNT;
+  int mid = map_port_name_to_mid (inferior_task, MACH_TYPE_TASK);
+  
+  MACH_ERROR_NO_INFERIOR;
+
+  /* Would be trivial to change, but is it desirable? */
+  if (args)
+    error ("Currently gdb can resume only it's inferior task");
+
+  ret = task_info (inferior_task,
+		   TASK_BASIC_INFO,
+		   (task_info_t) &ta_info,
+		   &infoCnt);
+  CHK ("task_resume_command: task_info failed", ret);
+  
+  if (ta_info.suspend_count == 0)
+    error ("Inferior task %d is not suspended", mid);
+  else if (ta_info.suspend_count == 1 &&
+	   from_tty &&
+	   !query ("Suspend count is now 1. Do you know what you are doing? "))
+    error ("Task not resumed");
+
+  ret = task_resume (inferior_task);
+  CHK ("task_resume_command: task_resume", ret);
+
+  if (ta_info.suspend_count == 1)
+    {
+      warning ("Inferior task %d is no longer suspended", mid);
+      must_suspend_thread = 1;
+      /* @@ This is not complete: Registers change all the time when not
+	 suspended! */
+      registers_changed ();
+    }
+  else
+    warning ("Inferior task %d suspend count is now %d",
+	     mid, ta_info.suspend_count-1);
+}
+
+
+void
+task_suspend_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  kern_return_t ret;
+  task_basic_info_data_t ta_info;
+  int infoCnt = TASK_BASIC_INFO_COUNT;
+  int mid = map_port_name_to_mid (inferior_task, MACH_TYPE_TASK);
+  
+  MACH_ERROR_NO_INFERIOR;
+
+  /* Would be trivial to change, but is it desirable? */
+  if (args)
+    error ("Currently gdb can suspend only it's inferior task");
+
+  ret = task_suspend (inferior_task);
+  CHK ("task_suspend_command: task_suspend", ret);
+
+  must_suspend_thread = 0;
+
+  ret = task_info (inferior_task,
+		   TASK_BASIC_INFO,
+		   (task_info_t) &ta_info,
+		   &infoCnt);
+  CHK ("task_suspend_command: task_info failed", ret);
+  
+  warning ("Inferior task %d suspend count is now %d",
+	   mid, ta_info.suspend_count);
+}
+
+static char *
+get_size (bytes)
+     int bytes;
+{
+  static char size [ 30 ];
+  int zz = bytes/1024;
+
+  if (zz / 1024)
+    sprintf (size, "%-2.1f M", ((float)bytes)/(1024.0*1024.0));
+  else
+    sprintf (size, "%d K", zz);
+
+  return size;
+}
+
+/* Does this require the target task to be suspended?? I don't think so. */
+void
+task_info_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int mid = -5;
+  mach_port_t task;
+  kern_return_t ret;
+  task_basic_info_data_t ta_info;
+  int infoCnt = TASK_BASIC_INFO_COUNT;
+  int page_size = round_page(1);
+  int thread_count = 0;
+  
+  if (MACH_PORT_VALID (inferior_task))
+    mid = map_port_name_to_mid (inferior_task,
+				MACH_TYPE_TASK);
+
+  task = inferior_task;
+
+  if (args)
+    {
+      int tmid = atoi (args);
+
+      if (tmid <= 0)
+	error ("Invalid mid %d for task info", tmid);
+
+      if (tmid != mid)
+	{
+	  mid = tmid;
+	  ret = machid_mach_port (mid_server, mid_auth, tmid, &task);
+	  CHK ("task_info_command: machid_mach_port map failed", ret);
+	}
+    }
+
+  if (mid < 0)
+    error ("You have to give the task MID as an argument");
+
+  ret = task_info (task,
+		   TASK_BASIC_INFO,
+		   (task_info_t) &ta_info,
+		   &infoCnt);
+  CHK ("task_info_command: task_info failed", ret);
+
+  printf_filtered ("\nTask info for task %d:\n\n", mid);
+  printf_filtered (" Suspend count : %d\n", ta_info.suspend_count);
+  printf_filtered (" Base priority : %d\n", ta_info.base_priority);
+  printf_filtered (" Virtual size  : %s\n", get_size (ta_info.virtual_size));
+  printf_filtered (" Resident size : %s\n", get_size (ta_info.resident_size));
+
+  {
+    thread_array_t thread_list;
+    
+    ret = task_threads (task, &thread_list, &thread_count);
+    CHK ("task_info_command: task_threads", ret);
+    
+    printf_filtered (" Thread count  : %d\n", thread_count);
+
+    consume_send_rights (thread_list, thread_count);
+    ret = vm_deallocate(mach_task_self(),
+			(vm_address_t)thread_list, 
+			(thread_count * sizeof(int)));
+    CHK("Error trying to deallocate thread list", ret);
+  }
+  if (have_emulator_p (task))
+    printf_filtered (" Emulator at   : 0x%x..0x%x\n",
+		     EMULATOR_BASE, EMULATOR_END);
+  else
+    printf_filtered (" No emulator.\n");
+
+  if (thread_count && task == inferior_task)
+    printf_filtered ("\nUse the \"thread list\" command to see the threads\n");
+}
+
+/* You may either FORWARD the exception to the inferior, or KEEP
+ * it and return to GDB command level.
+ *
+ * exception mid [ forward | keep ]
+ */
+
+static void
+exception_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *scan = args;
+  int exception;
+  int len;
+
+  if (!args)
+    error_no_arg ("exception number action");
+
+  while (*scan == ' ' || *scan == '\t') scan++;
+  
+  if ('0' <= *scan && *scan <= '9')
+    while ('0' <= *scan && *scan <= '9')
+      scan++;
+  else
+    error ("exception number action");
+
+  exception = atoi (args);
+  if (exception <= 0 || exception > MAX_EXCEPTION)
+    error ("Allowed exception numbers are in range 1..%d",
+	   MAX_EXCEPTION);
+
+  if (*scan != ' ' && *scan != '\t')
+    error ("exception number must be followed by a space");
+  else
+    while (*scan == ' ' || *scan == '\t') scan++;
+
+  args = scan;
+  len = 0;
+  while (*scan)
+    {
+      len++;
+      scan++;
+    }
+
+  if (!len)
+    error("exception number action");
+
+  if (!strncasecmp (args, "forward", len))
+    exception_map[ exception ].forward = TRUE;
+  else if (!strncasecmp (args, "keep", len))
+    exception_map[ exception ].forward = FALSE;
+  else
+    error ("exception action is either \"keep\" or \"forward\"");
+}
+
+static void
+print_exception_info (exception)
+     int exception;
+{
+  boolean_t forward = exception_map[ exception ].forward;
+
+  printf_filtered ("%s\t(%d): ", exception_map[ exception ].name,
+		   exception);
+  if (!forward)
+    if (exception_map[ exception ].sigmap != SIG_UNKNOWN)
+      printf_filtered ("keep and handle as signal %d\n",
+		       exception_map[ exception ].sigmap);
+    else
+      printf_filtered ("keep and handle as unknown signal %d\n",
+		       exception_map[ exception ].sigmap);
+  else
+    printf_filtered ("forward exception to inferior\n");
+}
+
+void
+exception_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int exception;
+
+  if (!args)
+    for (exception = 1; exception <= MAX_EXCEPTION; exception++)
+      print_exception_info (exception);
+  else
+    {
+      exception = atoi (args);
+
+      if (exception <= 0 || exception > MAX_EXCEPTION)
+	error ("Invalid exception number, values from 1 to %d allowed",
+	       MAX_EXCEPTION);
+      print_exception_info (exception);
+    }
+}
+
+/* Check for actions for mach exceptions.
+ */
+mach3_exception_actions (w, force_print_only, who)
+     WAITTYPE *w;
+     boolean_t force_print_only;
+     char *who;
+{
+  boolean_t force_print = FALSE;
+
+  
+  if (force_print_only ||
+      exception_map[stop_exception].sigmap == SIG_UNKNOWN)
+    force_print = TRUE;
+  else
+    WSETSTOP (*w, exception_map[stop_exception].sigmap);
+
+  if (exception_map[stop_exception].print || force_print)
+    {
+      target_terminal_ours ();
+      
+      printf_filtered ("\n%s received %s exception : ",
+		       who,
+		       exception_map[stop_exception].name);
+      
+      wrap_here ("   ");
+
+      switch(stop_exception) {
+      case EXC_BAD_ACCESS:
+	printf_filtered ("referencing address 0x%x : %s\n",
+			 stop_subcode,
+			 mach_error_string (stop_code));
+	break;
+      case EXC_BAD_INSTRUCTION:
+	printf_filtered
+	  ("illegal or undefined instruction. code %d subcode %d\n",
+	   stop_code, stop_subcode);
+	break;
+      case EXC_ARITHMETIC:
+	printf_filtered ("code %d\n", stop_code);
+	break;
+      case EXC_EMULATION:
+	printf_filtered ("code %d subcode %d\n", stop_code, stop_subcode);
+	break;
+      case EXC_SOFTWARE:
+	printf_filtered ("%s specific, code 0x%x\n",
+			 stop_code < 0xffff ? "hardware" : "os emulation",
+			 stop_code);
+	break;
+      case EXC_BREAKPOINT:
+	printf_filtered ("type %d (machine dependent)\n",
+			 stop_code);
+	break;
+      default:
+	fatal ("Unknown exception");
+      }
+    }
+}
+
+setup_notify_port (create_new)
+     int create_new;
+{
+  kern_return_t ret;
+
+  if (MACH_PORT_VALID (our_notify_port))
+    {
+      ret = mach_port_destroy (mach_task_self (), our_notify_port);
+      CHK ("Could not destroy our_notify_port", ret);
+    }
+
+  our_notify_port = MACH_PORT_NULL;
+  notify_chain    = (port_chain_t) NULL;
+  port_chain_destroy (port_chain_obstack);
+
+  if (create_new)
+    {
+      ret = mach_port_allocate (mach_task_self(),
+				MACH_PORT_RIGHT_RECEIVE,
+				&our_notify_port);
+      if (ret != KERN_SUCCESS)
+	fatal("Creating notify port %s", mach_error_string(ret));
+      
+      ret = mach_port_move_member(mach_task_self(), 
+				  our_notify_port,
+				  inferior_wait_port_set);
+      if (ret != KERN_SUCCESS)
+	fatal("initial move member %s",mach_error_string(ret));
+    }
+}
+
+/*
+ * Register our message port to the net name server
+ *
+ * Currently used only by the external stop-gdb program
+ * since ^C does not work if you would like to enter
+ * gdb command level while debugging your program.
+ *
+ * NOTE: If the message port is sometimes used for other
+ * purposes also, the NAME must not be a guessable one.
+ * Then, there should be a way to change it.
+ */
+
+char registered_name[ MAX_NAME_LEN ];
+
+void
+message_port_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (registered_name[0])
+    printf_filtered ("gdb's message port name: '%s'\n",
+		     registered_name);
+  else
+    printf_filtered ("gdb's message port is not currently registered\n");
+}
+
+void
+gdb_register_port (name, port)
+     char *name;
+     mach_port_t port;
+{
+  kern_return_t ret;
+  static int already_signed = 0;
+  int len;
+
+  if (! MACH_PORT_VALID (port) || !name || !*name)
+    {
+      warning ("Invalid registration request");
+      return;
+    }
+
+  if (! already_signed)
+    {
+      ret = mach_port_insert_right (mach_task_self (),
+				    our_message_port,
+				    our_message_port,
+				    MACH_MSG_TYPE_MAKE_SEND);
+      CHK ("Failed to create a signature to our_message_port", ret);
+      already_signed = 1;
+    }
+  else if (already_signed > 1)
+    {
+      ret = netname_check_out (name_server_port,
+			       registered_name,
+			       our_message_port);
+      CHK ("Failed to check out gdb's message port", ret);
+      registered_name[0] = '\000';
+      already_signed = 1;
+    }
+
+  ret = netname_check_in (name_server_port,	/* Name server port */
+			  name,			/* Name of service */
+			  our_message_port,	/* Signature */
+			  port); 		/* Creates a new send right */
+  CHK("Failed to check in the port", ret);
+  
+  len = 0;
+  while(len < MAX_NAME_LEN && *(name+len))
+    {
+      registered_name[len] = *(name+len);
+      len++;
+    }
+  registered_name[len] = '\000';
+  already_signed = 2;
+}  
+
+struct cmd_list_element *cmd_thread_list;
+struct cmd_list_element *cmd_task_list;
+
+/*ARGSUSED*/
+static void
+thread_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"thread\" must be followed by the name of a thread command.\n");
+  help_list (cmd_thread_list, "thread ", -1, gdb_stdout);
+}
+
+/*ARGSUSED*/
+static void
+task_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"task\" must be followed by the name of a task command.\n");
+  help_list (cmd_task_list, "task ", -1, gdb_stdout);
+}
+
+add_mach_specific_commands ()
+{
+  /* Thread handling commands */
+
+  /* FIXME: Move our thread support into the generic thread.c stuff so we
+     can share that code.  */
+  add_prefix_cmd ("mthread", class_stack, thread_command,
+      "Generic command for handling Mach threads in the debugged task.",
+      &cmd_thread_list, "thread ", 0, &cmdlist);
+
+  add_com_alias ("th", "mthread", class_stack, 1);
+
+  add_cmd ("select", class_stack, thread_select_command, 
+	   "Select and print MID of the selected thread",
+	   &cmd_thread_list);
+  add_cmd ("list",   class_stack, thread_list_command,
+	   "List info of task's threads. Selected thread is marked with '*'",
+	   &cmd_thread_list);
+  add_cmd ("suspend", class_run, thread_suspend_command,
+	   "Suspend one or all of the threads in the selected task.",
+	   &cmd_thread_list);
+  add_cmd ("resume", class_run, thread_resume_command,
+	   "Resume one or all of the threads in the selected task.",
+	   &cmd_thread_list);
+  add_cmd ("kill", class_run, thread_kill_command,
+	   "Kill the specified thread MID from inferior task.",
+	   &cmd_thread_list);
+#if 0
+  /* The rest of this support (condition_thread) was not merged.  It probably
+     should not be merged in this form, but instead added to the generic GDB
+     thread support.  */
+  add_cmd ("break", class_breakpoint, condition_thread,
+	   "Breakpoint N will only be effective for thread MID or @SLOT\n\
+	    If MID/@SLOT is omitted allow all threads to break at breakpoint",
+	   &cmd_thread_list);
+#endif
+  /* Thread command shorthands (for backward compatibility) */
+  add_alias_cmd ("ts", "mthread select", 0, 0, &cmdlist);
+  add_alias_cmd ("tl", "mthread list",   0, 0, &cmdlist);
+
+  /* task handling commands */
+
+  add_prefix_cmd ("task", class_stack, task_command,
+      "Generic command for handling debugged task.",
+      &cmd_task_list, "task ", 0, &cmdlist);
+
+  add_com_alias ("ta", "task", class_stack, 1);
+
+  add_cmd ("suspend", class_run, task_suspend_command,
+	   "Suspend the inferior task.",
+	   &cmd_task_list);
+  add_cmd ("resume", class_run, task_resume_command,
+	   "Resume the inferior task.",
+	   &cmd_task_list);
+  add_cmd ("info", no_class, task_info_command,
+	   "Print information about the specified task.",
+	   &cmd_task_list);
+
+  /* Print my message port name */
+
+  add_info ("message-port", message_port_info,
+	    "Returns the name of gdb's message port in the netnameserver");
+
+  /* Exception commands */
+
+  add_info ("exceptions", exception_info,
+	    "What debugger does when program gets various exceptions.\n\
+Specify an exception number as argument to print info on that\n\
+exception only.");
+
+  add_com ("exception", class_run, exception_command,
+	   "Specify how to handle an exception.\n\
+Args are exception number followed by \"forward\" or \"keep\".\n\
+`Forward' means forward the exception to the program's normal exception\n\
+handler.\n\
+`Keep' means reenter debugger if this exception happens, and GDB maps\n\
+the exception to some signal (see info exception)\n\
+Normally \"keep\" is used to return to GDB on exception.");
+}
+
+kern_return_t
+do_mach_notify_dead_name (notify, name)
+     mach_port_t notify;
+     mach_port_t name;
+{
+  kern_return_t kr = KERN_SUCCESS;
+
+  /* Find the thing that notified */
+  port_chain_t element = port_chain_member (notify_chain, name);
+
+  /* Take name of from unreceived dead name notification list */
+  notify_chain = port_chain_delete (notify_chain, name);
+
+  if (! element)
+    error ("Received a dead name notify from unchained port (0x%x)", name);
+  
+  switch (element->type) {
+
+  case MACH_TYPE_THREAD:
+    target_terminal_ours_for_output ();
+    if (name == current_thread)
+      {
+	printf_filtered ("\nCurrent thread %d died", element->mid);
+	current_thread = MACH_PORT_NULL;
+      }
+    else
+      printf_filtered ("\nThread %d died", element->mid);
+
+    break;
+
+  case MACH_TYPE_TASK:
+    target_terminal_ours_for_output ();
+    if (name != inferior_task)
+      printf_filtered ("Task %d died, but it was not the selected task",
+	       element->mid);
+    else	       
+      {
+	printf_filtered ("Current task %d died", element->mid);
+	
+	mach_port_destroy (mach_task_self(), name);
+	inferior_task = MACH_PORT_NULL;
+	
+	if (notify_chain)
+	  warning ("There were still unreceived dead_name_notifications???");
+	
+	/* Destroy the old notifications */
+	setup_notify_port (0);
+
+      }
+    break;
+
+  default:
+    error ("Unregistered dead_name 0x%x notification received. Type is %d, mid is 0x%x",
+	   name, element->type, element->mid);
+    break;
+  }
+
+  return KERN_SUCCESS;
+}
+
+kern_return_t
+do_mach_notify_msg_accepted (notify, name)
+     mach_port_t notify;
+     mach_port_t name;
+{
+  warning ("do_mach_notify_msg_accepted : notify %x, name %x",
+	   notify, name);
+  return KERN_SUCCESS;
+}
+
+kern_return_t
+do_mach_notify_no_senders (notify, mscount)
+     mach_port_t notify;
+     mach_port_mscount_t mscount;
+{
+  warning ("do_mach_notify_no_senders : notify %x, mscount %x",
+	   notify, mscount);
+  return KERN_SUCCESS;
+}
+
+kern_return_t
+do_mach_notify_port_deleted (notify, name)
+     mach_port_t notify;
+     mach_port_t name;
+{
+  warning ("do_mach_notify_port_deleted : notify %x, name %x",
+	   notify, name);
+  return KERN_SUCCESS;
+}
+
+kern_return_t
+do_mach_notify_port_destroyed (notify, rights)
+     mach_port_t notify;
+     mach_port_t rights;
+{
+  warning ("do_mach_notify_port_destroyed : notify %x, rights %x",
+	   notify, rights);
+  return KERN_SUCCESS;
+}
+
+kern_return_t
+do_mach_notify_send_once (notify)
+     mach_port_t notify;
+{
+#ifdef DUMP_SYSCALL
+  /* MANY of these are generated. */
+  warning ("do_mach_notify_send_once : notify %x",
+	   notify);
+#endif
+  return KERN_SUCCESS;
+}
+
+/* Kills the inferior. It's gone when you call this */
+static void
+kill_inferior_fast ()
+{
+  WAITTYPE w;
+
+  if (inferior_pid == 0 || inferior_pid == 1)
+    return;
+
+  /* kill() it, since the Unix server does not otherwise notice when
+   * killed with task_terminate().
+   */
+  if (inferior_pid > 0)
+    kill (inferior_pid, SIGKILL);
+
+  /* It's propably terminate already */
+  (void) task_terminate (inferior_task);
+
+  inferior_task  = MACH_PORT_NULL;
+  current_thread = MACH_PORT_NULL;
+
+  wait3 (&w, WNOHANG, 0);
+
+  setup_notify_port (0);
+}
+
+static void
+m3_kill_inferior ()
+{
+  kill_inferior_fast ();
+  target_mourn_inferior ();
+}
+
+/* Clean up after the inferior dies.  */
+
+static void
+m3_mourn_inferior ()
+{
+  unpush_target (&m3_ops);
+  generic_mourn_inferior ();
+}
+
+
+/* Fork an inferior process, and start debugging it.  */
+
+static void
+m3_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  fork_inferior (exec_file, allargs, env, m3_trace_me, m3_trace_him, NULL, NULL);
+  /* We are at the first instruction we care about.  */
+  /* Pedal to the metal... */
+  proceed ((CORE_ADDR) -1, 0, 0);
+}
+
+/* Mark our target-struct as eligible for stray "run" and "attach"
+   commands.  */
+static int
+m3_can_run ()
+{
+  return 1;
+}
+
+/* Mach 3.0 does not need ptrace for anything
+ * Make sure nobody uses it on mach.
+ */
+ptrace (a,b,c,d)
+int a,b,c,d;
+{
+  error ("Lose, Lose! Somebody called ptrace\n");
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+m3_resume (pid, step, signal)
+     int pid;
+     int step;
+     enum target_signal signal;
+{
+  kern_return_t	ret;
+
+  if (step)
+    {
+      thread_basic_info_data_t th_info;
+      unsigned int	       infoCnt = THREAD_BASIC_INFO_COUNT;
+      
+      /* There is no point in single stepping when current_thread
+       * is dead.
+       */
+      if (! MACH_PORT_VALID (current_thread))
+	error ("No thread selected; can not single step");
+      
+      /* If current_thread is suspended, tracing it would never return.
+       */
+      ret = thread_info (current_thread,
+			 THREAD_BASIC_INFO,
+			 (thread_info_t) &th_info,
+			 &infoCnt);
+      CHK ("child_resume: can't get thread info", ret);
+      
+      if (th_info.suspend_count)
+	error ("Can't trace a suspended thread. Use \"thread resume\" command to resume it");
+    }
+
+  vm_read_cache_valid = FALSE;
+
+  if (signal && inferior_pid > 0) /* Do not signal, if attached by MID */
+    kill (inferior_pid, target_signal_to_host (signal));
+
+  if (step)
+    {
+      suspend_all_threads (0);
+
+      setup_single_step (current_thread, TRUE);
+      
+      ret = thread_resume (current_thread);
+      CHK ("thread_resume", ret);
+    }
+  
+  ret = task_resume (inferior_task);
+  if (ret == KERN_FAILURE)
+    warning ("Task was not suspended");
+  else
+    CHK ("Resuming task", ret);
+  
+  /* HACK HACK This is needed by the multiserver system HACK HACK */
+  while ((ret = task_resume(inferior_task)) == KERN_SUCCESS)
+    /* make sure it really runs */;
+  /* HACK HACK This is needed by the multiserver system HACK HACK */
+}
+
+#ifdef ATTACH_DETACH
+
+/* Start debugging the process with the given task */
+void
+task_attach (tid)
+  task_t tid;
+{
+  kern_return_t ret;
+  inferior_task = tid;
+
+  ret = task_suspend (inferior_task);
+  CHK("task_attach: task_suspend", ret);
+
+  must_suspend_thread = 0;
+
+  setup_notify_port (1);
+
+  request_notify (inferior_task, MACH_NOTIFY_DEAD_NAME, MACH_TYPE_TASK);
+
+  setup_exception_port ();
+  
+  emulator_present = have_emulator_p (inferior_task);
+
+  attach_flag = 1;
+}
+
+/* Well, we can call error also here and leave the
+ * target stack inconsistent. Sigh.
+ * Fix this sometime (the only way to fail here is that
+ * the task has no threads at all, which is rare, but
+ * possible; or if the target task has died, which is also
+ * possible, but unlikely, since it has been suspended.
+ * (Someone must have killed it))
+ */
+void
+attach_to_thread ()
+{
+  if (select_thread (inferior_task, 0, 1) != KERN_SUCCESS)
+    error ("Could not select any threads to attach to");
+}
+
+mid_attach (mid)
+    int	mid;
+{
+    kern_return_t ret;
+
+    ret = machid_mach_port (mid_server, mid_auth, mid, &inferior_task);
+    CHK("mid_attach: machid_mach_port", ret);
+
+    task_attach (inferior_task);
+
+    return mid;
+}
+
+/* 
+ * Start debugging the process whose unix process-id is PID.
+ * A negative "pid" value is legal and signifies a mach_id not a unix pid.
+ *
+ * Prevent (possible unwanted) dangerous operations by enabled users
+ * like "atta 0" or "atta foo" (equal to the previous :-) and
+ * "atta pidself". Anyway, the latter is allowed by specifying a MID.
+ */
+static int
+m3_do_attach (pid)
+     int pid;
+{
+  kern_return_t ret;
+
+  if (pid == 0)
+    error("MID=0, Debugging the master unix server does not compute");
+
+  /* Foo. This assumes gdb has a unix pid */
+  if (pid == getpid())
+    error ("I will debug myself only by mid. (Gdb would suspend itself!)");
+
+  if (pid < 0)
+    {
+      mid_attach (-(pid));
+
+      /* inferior_pid will be NEGATIVE! */
+      inferior_pid = pid;
+
+      return inferior_pid;
+    }
+
+  inferior_task = task_by_pid (pid);
+  if (! MACH_PORT_VALID (inferior_task))
+    error("Cannot map Unix pid %d to Mach task port", pid);
+
+  task_attach (inferior_task);
+
+  inferior_pid = pid;
+
+  return inferior_pid;
+}
+
+/* Attach to process PID, then initialize for debugging it
+   and wait for the trace-trap that results from attaching.  */
+
+static void
+m3_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *exec_file;
+  int pid;
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+  pid = atoi (args);
+
+  if (pid == getpid())		/* Trying to masturbate? */
+    error ("I refuse to debug myself!");
+
+  if (from_tty)
+    {
+      exec_file = (char *) get_exec_file (0);
+
+      if (exec_file)
+	printf_unfiltered ("Attaching to program `%s', %s\n", exec_file, target_pid_to_str (pid));
+      else
+	printf_unfiltered ("Attaching to %s\n", target_pid_to_str (pid));
+
+      gdb_flush (gdb_stdout);
+    }
+
+  m3_do_attach (pid);
+  inferior_pid = pid;
+  push_target (&m3_ops);
+}
+
+void
+deallocate_inferior_ports ()
+{
+  kern_return_t  ret;
+  thread_array_t thread_list;
+  int		 thread_count, index;
+
+  if (!MACH_PORT_VALID (inferior_task))
+    return;
+
+  ret = task_threads (inferior_task, &thread_list, &thread_count);
+  if (ret != KERN_SUCCESS)
+    {
+      warning ("deallocate_inferior_ports: task_threads",
+	       mach_error_string(ret));
+      return;
+    }
+
+  /* Get rid of send rights to task threads */
+  for (index = 0; index < thread_count; index++)
+    {
+      int rights;
+      ret = mach_port_get_refs (mach_task_self (),
+				thread_list[index],
+				MACH_PORT_RIGHT_SEND,
+				&rights);
+      CHK("deallocate_inferior_ports: get refs", ret);
+
+      if (rights > 0)
+	{
+	  ret = mach_port_mod_refs (mach_task_self (),
+				    thread_list[index],
+				    MACH_PORT_RIGHT_SEND,
+				    -rights);
+	  CHK("deallocate_inferior_ports: mod refs", ret);
+	}
+    }
+
+  ret = mach_port_mod_refs (mach_task_self (),
+			    inferior_exception_port,
+			    MACH_PORT_RIGHT_RECEIVE,
+			    -1);
+  CHK ("deallocate_inferior_ports: cannot get rid of exception port", ret);
+
+  ret = mach_port_deallocate (mach_task_self (),
+			      inferior_task);
+  CHK ("deallocate_task_port: deallocating inferior_task", ret);
+
+  current_thread = MACH_PORT_NULL;
+  inferior_task  = MACH_PORT_NULL;
+}
+
+/* Stop debugging the process whose number is PID
+   and continue it with signal number SIGNAL.
+   SIGNAL = 0 means just continue it.  */
+
+static void
+m3_do_detach (signal)
+     int signal;
+{
+  kern_return_t ret;
+
+  MACH_ERROR_NO_INFERIOR;
+
+  if (current_thread != MACH_PORT_NULL)
+    {
+      /* Store the gdb's view of the thread we are deselecting
+       * before we detach.
+       * @@ I am really not sure if this is ever needeed.
+       */
+      target_prepare_to_store ();
+      target_store_registers (-1);
+    }
+
+  ret = task_set_special_port (inferior_task,
+			       TASK_EXCEPTION_PORT, 
+			       inferior_old_exception_port);
+  CHK ("task_set_special_port", ret);
+
+  /* Discard all requested notifications */
+  setup_notify_port (0);
+
+  if (remove_breakpoints ())
+    warning ("Could not remove breakpoints when detaching");
+  
+  if (signal && inferior_pid > 0)
+    kill (inferior_pid, signal);
+  
+  /* the task might be dead by now */
+  (void) task_resume (inferior_task);
+  
+  deallocate_inferior_ports ();
+  
+  attach_flag = 0;
+}
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via fork.  */
+
+static void
+m3_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int siggnal = 0;
+
+  if (from_tty)
+    {
+      char *exec_file = get_exec_file (0);
+      if (exec_file == 0)
+	exec_file = "";
+      printf_unfiltered ("Detaching from program: %s %s\n",
+	      exec_file, target_pid_to_str (inferior_pid));
+      gdb_flush (gdb_stdout);
+    }
+  if (args)
+    siggnal = atoi (args);
+  
+  m3_do_detach (siggnal);
+  inferior_pid = 0;
+  unpush_target (&m3_ops);		/* Pop out of handling an inferior */
+}
+#endif /* ATTACH_DETACH */
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+m3_prepare_to_store ()
+{
+#ifdef CHILD_PREPARE_TO_STORE
+  CHILD_PREPARE_TO_STORE ();
+#endif
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+m3_files_info (ignore)
+     struct target_ops *ignore;
+{
+  /* FIXME: should print MID and all that crap.  */
+  printf_unfiltered ("\tUsing the running image of %s %s.\n",
+		       attach_flag? "attached": "child", target_pid_to_str (inferior_pid));
+}
+
+static void
+m3_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Unix child process.");
+}
+
+#ifdef DUMP_SYSCALL
+#ifdef __STDC__
+#define STR(x) #x
+#else
+#define STR(x) "x"
+#endif
+
+char	*bsd1_names[] = {
+  "execve",
+  "fork",
+  "take_signal",
+  "sigreturn",
+  "getrusage",
+  "chdir",
+  "chroot",
+  "open",
+  "creat",
+  "mknod",
+  "link",
+  "symlink",
+  "unlink",
+  "access",
+  "stat",
+  "readlink",
+  "chmod",
+  "chown",
+  "utimes",
+  "truncate",
+  "rename",
+  "mkdir",
+  "rmdir",
+  "xutimes",
+  "mount",
+  "umount",
+  "acct",
+  "setquota",
+  "write_short",
+  "write_long",
+  "send_short",
+  "send_long",
+  "sendto_short",
+  "sendto_long",
+  "select",
+  "task_by_pid",
+  "recvfrom_short",
+  "recvfrom_long",
+  "setgroups",
+  "setrlimit",
+  "sigvec",
+  "sigstack",
+  "settimeofday",
+  "adjtime",
+  "setitimer",
+  "sethostname",
+  "bind",
+  "accept",
+  "connect",
+  "setsockopt",
+  "getsockopt",
+  "getsockname",
+  "getpeername",
+  "init_process",
+  "table_set",
+  "table_get",
+  "pioctl",
+  "emulator_error",
+  "readwrite",
+  "share_wakeup",
+  0,
+  "maprw_request_it",
+  "maprw_release_it",
+  "maprw_remap",
+  "pid_by_task",
+};
+
+int	bsd1_nnames = sizeof(bsd1_names)/sizeof(bsd1_names[0]);
+
+char*
+name_str(name,buf)
+
+int	name;
+char	*buf;
+
+{
+  switch (name) {
+  case MACH_MSG_TYPE_BOOLEAN:
+    return "boolean";
+  case MACH_MSG_TYPE_INTEGER_16:
+    return "short";
+  case MACH_MSG_TYPE_INTEGER_32:
+    return "long";
+  case MACH_MSG_TYPE_CHAR:
+    return "char";
+  case MACH_MSG_TYPE_BYTE:
+    return "byte";
+  case MACH_MSG_TYPE_REAL:
+    return "real";
+  case MACH_MSG_TYPE_STRING:
+    return "string";
+  default:
+    sprintf(buf,"%d",name);
+    return buf;
+  }
+}
+
+char *
+id_str(id,buf)
+
+int	id;
+char	*buf;
+
+{
+  char	*p;
+  if (id >= 101000 && id < 101000+bsd1_nnames) {
+    if (p = bsd1_names[id-101000])
+      return p;
+  }
+  if (id == 102000)
+    return "psignal_retry";
+  if (id == 100000)
+    return "syscall";
+  sprintf(buf,"%d",id);
+  return buf;
+}
+
+print_msg(mp)
+mach_msg_header_t	*mp;
+{
+  char	*fmt_x = "%20s : 0x%08x\n";
+  char	*fmt_d = "%20s : %10d\n";
+  char	*fmt_s = "%20s : %s\n";
+  char	buf[100];
+
+  puts_filtered ("\n");
+#define pr(fmt,h,x) printf_filtered(fmt,STR(x),(h).x)
+  pr(fmt_x,(*mp),msgh_bits);
+  pr(fmt_d,(*mp),msgh_size);
+  pr(fmt_x,(*mp),msgh_remote_port);
+  pr(fmt_x,(*mp),msgh_local_port);
+  pr(fmt_d,(*mp),msgh_kind);
+  printf_filtered(fmt_s,STR(msgh_id),id_str(mp->msgh_id,buf));
+  
+  if (debug_level > 1)
+  {
+    char	*p,*ep,*dp;
+    int		plen;
+    p = (char*)mp;
+    ep = p+mp->msgh_size;
+    p += sizeof(*mp);
+    for(; p < ep; p += plen) {
+      mach_msg_type_t	*tp;
+      mach_msg_type_long_t	*tlp;
+      int	name,size,number;
+      tp = (mach_msg_type_t*)p;
+      if (tp->msgt_longform) {
+	tlp = (mach_msg_type_long_t*)tp;
+	name = tlp->msgtl_name;
+	size = tlp->msgtl_size;
+	number = tlp->msgtl_number;
+	plen = sizeof(*tlp);
+      } else {
+	name = tp->msgt_name;
+	size = tp->msgt_size;
+	number = tp->msgt_number;
+	plen = sizeof(*tp);
+      }
+      printf_filtered("name=%-16s size=%2d number=%7d inline=%d long=%d deal=%d\n",
+		      name_str(name,buf),size,number,tp->msgt_inline,
+		      tp->msgt_longform, tp->msgt_deallocate);
+      dp = p+plen;
+      if (tp->msgt_inline) {
+	int	l;
+	l = size*number/8;
+	l = (l+sizeof(long)-1)&~((sizeof(long))-1);
+	plen += l;
+	print_data(dp,size,number);
+      } else {
+	plen += sizeof(int*);
+      }
+      printf_filtered("plen=%d\n",plen);
+    }
+  }
+}
+
+print_data(p,size,number)
+
+char	*p;
+
+{
+  int	*ip;
+  short	*sp;
+  int	i;
+
+  switch (size) {
+  case 8:
+    for(i = 0; i < number; i++) {
+      printf_filtered(" %02x",p[i]);
+    }
+    break;
+  case 16:
+    sp = (short*)p;
+    for(i = 0; i < number; i++) {
+      printf_filtered(" %04x",sp[i]);
+    }
+    break;
+  case 32:
+    ip = (int*)p;
+    for(i = 0; i < number; i++) {
+      printf_filtered(" %08x",ip[i]);
+    }
+    break;
+  }
+  puts_filtered("\n");
+}
+#endif  DUMP_SYSCALL
+
+static void
+m3_stop ()
+{
+  error ("to_stop target function not implemented");
+}
+
+static char *
+m3_pid_to_exec_file (pid)
+int  pid;
+{
+  error ("to_pid_to_exec_file target function not implemented");
+  return NULL;  /* To keep all compilers happy. */
+}
+
+static void
+init_m3_ops ()
+{
+  m3_ops.to_shortname = "mach";
+  m3_ops.to_longname = "Mach child process";
+  m3_ops.to_doc = "Mach child process (started by the \"run\" command).";
+  m3_ops.to_open = m3_open;
+  m3_ops.to_attach = m3_attach;
+  m3_ops.to_detach = m3_detach;
+  m3_ops.to_resume = m3_resume;
+  m3_ops.to_wait = mach_really__wait;
+  m3_ops.to_fetch_registers = fetch_inferior_registers;
+  m3_ops.to_store_registers = store_inferior_registers;
+  m3_ops.to_prepare_to_store = m3_prepare_to_store;
+  m3_ops.to_xfer_memory = m3_xfer_memory;
+  m3_ops.to_files_info = m3_files_info;
+  m3_ops.to_insert_breakpoint = memory_insert_breakpoint;
+  m3_ops.to_remove_breakpoint = memory_remove_breakpoint;
+  m3_ops.to_terminal_init = terminal_init_inferior;
+  m3_ops.to_terminal_inferior = terminal_inferior;
+  m3_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+  m3_ops.to_terminal_ours = terminal_ours;
+  m3_ops.to_terminal_info = child_terminal_info;
+  m3_ops.to_kill = m3_kill_inferior;
+  m3_ops.to_create_inferior = m3_create_inferior;
+  m3_ops.to_mourn_inferior = m3_mourn_inferior;
+  m3_ops.to_can_run = m3_can_run;
+  m3_ops.to_stop = m3_stop;
+  m3_ops.to_pid_to_exec_file = m3_pid_to_exec_file;
+  m3_ops.to_stratum = process_stratum;
+  m3_ops.to_has_all_memory = 1;
+  m3_ops.to_has_memory = 1;
+  m3_ops.to_has_stack = 1;
+  m3_ops.to_has_registers = 1;
+  m3_ops.to_has_execution = 1;
+  m3_ops.to_magic = OPS_MAGIC;
+}
+
+void
+_initialize_m3_nat ()
+{
+  kern_return_t ret;
+
+  init_m3_ops ();
+  add_target (&m3_ops);
+
+  ret = mach_port_allocate(mach_task_self(), 
+			   MACH_PORT_RIGHT_PORT_SET,
+			   &inferior_wait_port_set);
+  if (ret != KERN_SUCCESS)
+    fatal("initial port set %s",mach_error_string(ret));
+
+  /* mach_really_wait now waits for this */
+  currently_waiting_for = inferior_wait_port_set;
+
+  ret = netname_look_up(name_server_port, hostname, "MachID", &mid_server);
+  if (ret != KERN_SUCCESS)
+    {
+      mid_server = MACH_PORT_NULL;
+      
+      warning ("initialize machid: netname_lookup_up(MachID) : %s",
+	       mach_error_string(ret));
+      warning ("Some (most?) features disabled...");
+    }
+  
+  mid_auth = mach_privileged_host_port();
+  if (mid_auth == MACH_PORT_NULL)
+    mid_auth = mach_task_self();
+  
+  obstack_init (port_chain_obstack);
+
+  ret = mach_port_allocate (mach_task_self (), 
+			    MACH_PORT_RIGHT_RECEIVE,
+			    &thread_exception_port);
+  CHK ("Creating thread_exception_port for single stepping", ret);
+  
+  ret = mach_port_insert_right (mach_task_self (),
+				thread_exception_port,
+				thread_exception_port,
+				MACH_MSG_TYPE_MAKE_SEND);
+  CHK ("Inserting send right to thread_exception_port", ret);
+
+  /* Allocate message port */
+  ret = mach_port_allocate (mach_task_self (),
+			    MACH_PORT_RIGHT_RECEIVE,
+			    &our_message_port);
+  if (ret != KERN_SUCCESS)
+    warning ("Creating message port %s", mach_error_string (ret));
+  else
+    {
+      char buf[ MAX_NAME_LEN ];
+      ret = mach_port_move_member(mach_task_self (),
+				  our_message_port,
+				  inferior_wait_port_set);
+      if (ret != KERN_SUCCESS)
+	warning ("message move member %s", mach_error_string (ret));
+
+
+      /* @@@@ No way to change message port name currently */
+      /* Foo. This assumes gdb has a unix pid */
+      sprintf (buf, "gdb-%d", getpid ());
+      gdb_register_port (buf, our_message_port);
+    }
+  
+  /* Heap for thread commands */
+  obstack_init (cproc_obstack);
+
+  add_mach_specific_commands ();
+}
diff --git a/gdb/m32r-rom.c b/gdb/m32r-rom.c
new file mode 100644
index 0000000..2be833e
--- /dev/null
+++ b/gdb/m32r-rom.c
@@ -0,0 +1,650 @@
+/* Remote debugging interface to m32r and mon2000 ROM monitors for GDB, 
+   the GNU debugger.
+   Copyright 1996 Free Software Foundation, Inc.
+
+   Adapted by Michael Snyder of Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module defines communication with the Mitsubishi m32r monitor */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "symtab.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "symfile.h"	/* for generic load */
+#include <time.h>	/* for time_t */
+#include "gdb_string.h"
+#include "objfiles.h"	/* for ALL_OBJFILES etc. */
+
+
+extern void report_transfer_performance PARAMS ((unsigned long, time_t, time_t));
+
+#ifndef _MSC_VER
+/*
+ * All this stuff just to get my host computer's IP address!
+ */
+#include <sys/types.h>
+#include <netdb.h>	/* for hostent */
+#include <netinet/in.h>	/* for struct in_addr */
+#if 1
+#include <arpa/inet.h>	/* for inet_ntoa */
+#endif
+#endif
+
+static char *board_addr;	/* user-settable IP address for M32R-EVA */
+static char *server_addr;	/* user-settable IP address for gdb host */
+static char *download_path;	/* user-settable path for SREC files     */
+
+
+/* 
+ * Function: m32r_load_1 (helper function)
+ */
+
+static void
+m32r_load_section (abfd, s, data_count)
+     bfd      *abfd;
+     asection *s;
+     unsigned int *data_count;
+{
+  if (s->flags & SEC_LOAD)
+    {
+      bfd_size_type section_size = bfd_section_size (abfd, s);
+      bfd_vma       section_base = bfd_section_lma  (abfd, s);
+      unsigned int  buffer, i;
+
+      *data_count += section_size;
+
+      printf_filtered ("Loading section %s, size 0x%lx lma ",
+		       bfd_section_name (abfd, s), section_size);
+      print_address_numeric (section_base, 1, gdb_stdout);
+      printf_filtered ("\n");
+      gdb_flush (gdb_stdout);
+      monitor_printf ("%x mw\r" , section_base);
+      for (i = 0; i < section_size; i += 4)
+	{
+	  QUIT;
+	  monitor_expect (" -> ", NULL, 0);
+	  bfd_get_section_contents (abfd, s, (char *) &buffer, i, 4);
+	  monitor_printf ("%x\n", buffer);
+	}
+      monitor_expect (" -> ", NULL, 0);
+      monitor_printf ("q\n");
+      monitor_expect_prompt (NULL, 0);
+    }
+}
+
+static int 
+m32r_load_1 (dummy)
+     void *dummy;
+{
+  int data_count = 0;
+
+  bfd_map_over_sections ((bfd *) dummy, m32r_load_section, &data_count);
+  return data_count;
+}
+
+/* 
+ * Function: m32r_load (an alternate way to load) 
+ */
+
+static void
+m32r_load (filename, from_tty) 
+    char *filename;
+    int from_tty;
+{
+  extern int inferior_pid;
+  bfd *abfd;
+  asection *s;
+  unsigned int i, data_count = 0;
+  time_t start_time, end_time;	/* for timing of download */
+
+  if (filename == NULL || filename[0] == 0)
+    filename = get_exec_file (1);
+
+  abfd = bfd_openr (filename, 0);
+  if (!abfd)
+    error ("Unable to open file %s\n", filename);
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    error ("File is not an object file\n");
+  start_time = time (NULL);
+#if 0
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	bfd_size_type section_size = bfd_section_size (abfd, s);
+	bfd_vma       section_base = bfd_section_vma  (abfd, s);
+	unsigned int  buffer;
+
+	data_count += section_size;
+
+	printf_filtered ("Loading section %s, size 0x%lx vma ",
+			 bfd_section_name (abfd, s), section_size);
+	print_address_numeric (section_base, 1, gdb_stdout);
+	printf_filtered ("\n");
+ 	gdb_flush (gdb_stdout);
+	monitor_printf ("%x mw\r" , section_base);
+	for (i = 0; i < section_size; i += 4)
+	  {
+	    monitor_expect (" -> ", NULL, 0);
+	    bfd_get_section_contents (abfd, s, (char *) &buffer, i, 4);
+	    monitor_printf ("%x\n", buffer);
+	  }
+	monitor_expect (" -> ", NULL, 0);
+	monitor_printf ("q\n");
+	monitor_expect_prompt (NULL, 0);
+      }
+#else
+  if (!(catch_errors (m32r_load_1, abfd, "Load aborted!\n", RETURN_MASK_ALL)))
+    {
+      monitor_printf ("q\n");
+      return;
+    }
+#endif
+  end_time = time (NULL);
+  printf_filtered ("Start address 0x%lx\n", bfd_get_start_address (abfd));
+  report_transfer_performance (data_count, start_time, end_time);
+
+  /* Finally, make the PC point at the start address */
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;             /* No process now */
+
+  /* This is necessary because many things were based on the PC at the
+     time that we attached to the monitor, which is no longer valid
+     now that we have loaded new code (and just changed the PC).
+     Another way to do this might be to call normal_stop, except that
+     the stack may not be valid, and things would get horribly
+     confused... */
+
+  clear_symtab_users ();
+}
+
+static void
+m32r_load_gen (filename, from_tty) 
+    char *filename;
+    int from_tty;
+{
+  generic_load (filename, from_tty);
+}
+
+static void m32r_open PARAMS ((char *args, int from_tty));
+static void mon2000_open PARAMS ((char *args, int from_tty));
+
+/* This array of registers needs to match the indexes used by GDB. The
+   whole reason this exists is because the various ROM monitors use
+   different names than GDB does, and don't support all the registers
+   either. So, typing "info reg sp" becomes an "A7". */
+
+static char *m32r_regnames[] = 
+{ "r0",  "r1",  "r2",  "r3",  "r4",  "r5",  "r6",  "r7", 
+  "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15", 
+  "psw", "cbr", "spi", "spu", "bpc", "pc",  "accl", "acch", 
+};
+
+static void
+m32r_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+  int num_regs = sizeof(m32r_regnames) / sizeof(m32r_regnames[0]);
+
+  for (regno = 0; regno < num_regs; regno++)
+    if (strncmp(regname, m32r_regnames[regno], regnamelen) == 0)
+      break;
+
+  if (regno >= num_regs)
+    return;		/* no match */
+
+  if (regno == ACCL_REGNUM)
+    { /* special handling for 64-bit acc reg */
+      monitor_supply_register (ACCH_REGNUM, val);
+      if (val = (char *) strchr(val, ':'))  /* skip past ':' to get 2nd word */
+	monitor_supply_register (ACCL_REGNUM, val + 1);
+    }
+  else
+    {
+      monitor_supply_register (regno, val);
+      if (regno == PSW_REGNUM)
+	{
+	  unsigned long psw = strtoul (val, NULL, 16);
+	  char *zero = "00000000", *one = "00000001";
+
+#ifdef SM_REGNUM
+	  /* Stack mode bit */
+	  monitor_supply_register (SM_REGNUM, (psw & 0x80) ? one : zero);
+#endif
+#ifdef BSM_REGNUM
+	  /* Backup stack mode bit */
+	  monitor_supply_register (BSM_REGNUM, (psw & 0x8000) ? one : zero);
+#endif
+#ifdef IE_REGNUM
+	  /* Interrupt enable bit */
+	  monitor_supply_register (IE_REGNUM, (psw & 0x40) ? one : zero);
+#endif
+#ifdef BIE_REGNUM
+	  /* Backup interrupt enable bit */
+	  monitor_supply_register (BIE_REGNUM, (psw & 0x4000) ? one : zero);
+#endif
+#ifdef COND_REGNUM
+	  /* Condition bit (carry etc.) */
+	  monitor_supply_register (COND_REGNUM, (psw & 0x1) ? one : zero);
+#endif
+#ifdef CBR_REGNUM
+	  monitor_supply_register (CBR_REGNUM, (psw & 0x1) ? one : zero);
+#endif
+#ifdef BPC_REGNUM
+	  monitor_supply_register (BPC_REGNUM, zero); /* KLUDGE:   (???????) */
+#endif
+#ifdef BCARRY_REGNUM
+	  monitor_supply_register (BCARRY_REGNUM, zero); /* KLUDGE: (??????) */
+#endif
+	}	  
+
+      if (regno == SPI_REGNUM || regno == SPU_REGNUM)	
+	{ /* special handling for stack pointer (spu or spi) */
+	  unsigned long stackmode = read_register (PSW_REGNUM) & 0x80;
+
+	  if (regno == SPI_REGNUM && !stackmode)	/* SP == SPI */
+	    monitor_supply_register (SP_REGNUM, val);
+	  else if (regno == SPU_REGNUM && stackmode)	/* SP == SPU */
+	    monitor_supply_register (SP_REGNUM, val);
+	}
+    }
+}
+
+/* m32r RevC board monitor */
+
+static struct target_ops m32r_ops;
+
+static char *m32r_inits[] = {"\r", NULL};
+
+static struct monitor_ops m32r_cmds ;
+
+static void 
+init_m32r_cmds(void)
+{
+  m32r_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_REGISTER_VALUE_FIRST;
+  m32r_cmds.init =   m32r_inits;		/* Init strings */
+  m32r_cmds.cont =   "go\r";			/* continue command */
+  m32r_cmds.step =   "step\r";			/* single step */
+  m32r_cmds.stop =   NULL;			/* interrupt command */
+  m32r_cmds.set_break =   "%x +bp\r";		/* set a breakpoint */
+  m32r_cmds.clr_break =   "%x -bp\r";		/* clear a breakpoint */
+  m32r_cmds.clr_all_break =   "bpoff\r";	/* clear all breakpoints */
+  m32r_cmds.fill =   "%x %x %x fill\r";		/* fill (start length val) */
+  m32r_cmds.setmem.cmdb =     "%x 1 %x fill\r";	/* setmem.cmdb (addr, value) */
+  m32r_cmds.setmem.cmdw =     "%x 1 %x fillh\r";/* setmem.cmdw (addr, value) */
+  m32r_cmds.setmem.cmdl =     "%x 1 %x fillw\r";/* setmem.cmdl (addr, value) */
+  m32r_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  m32r_cmds.setmem.resp_delim =     NULL;	/* setmem.resp_delim */
+  m32r_cmds.setmem.term =     NULL;		/* setmem.term */
+  m32r_cmds.setmem.term_cmd =     NULL;		/* setmem.term_cmd */
+  m32r_cmds.getmem.cmdb =     "%x %x dump\r";	/* getmem.cmdb (addr, len) */
+  m32r_cmds.getmem.cmdw =     NULL;		/* getmem.cmdw (addr, len) */
+  m32r_cmds.getmem.cmdl =     NULL;		/* getmem.cmdl (addr, len) */
+  m32r_cmds.getmem.cmdll =     NULL;		/* getmem.cmdll (addr, len) */
+  m32r_cmds.getmem.resp_delim =     ": ";	/* getmem.resp_delim */
+  m32r_cmds.getmem.term =     NULL;		/* getmem.term */
+  m32r_cmds.getmem.term_cmd =     NULL	;	/* getmem.term_cmd */
+  m32r_cmds.setreg.cmd =     "%x to %%%s\r";	/* setreg.cmd (name, value) */
+  m32r_cmds.setreg.resp_delim =     NULL;	/* setreg.resp_delim */
+  m32r_cmds.setreg.term =     NULL;		/* setreg.term */
+  m32r_cmds.setreg.term_cmd =     NULL	;	/* setreg.term_cmd */
+  m32r_cmds.getreg.cmd =     NULL;		/* getreg.cmd (name) */
+  m32r_cmds.getreg.resp_delim =     NULL;	/* getreg.resp_delim */
+  m32r_cmds.getreg.term =     NULL;		/* getreg.term */
+  m32r_cmds.getreg.term_cmd =     NULL	;	/* getreg.term_cmd */
+  m32r_cmds.dump_registers =   ".reg\r";	/* dump_registers */
+  m32r_cmds.register_pattern =   "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  m32r_cmds.supply_register =   m32r_supply_register;	/* supply_register */
+  m32r_cmds.load_routine =   NULL;		/* load_routine (defaults to SRECs) */
+  m32r_cmds.load =   NULL;			/* download command */
+  m32r_cmds.loadresp =   NULL;			/* load response */
+  m32r_cmds.prompt =   "ok ";			/* monitor command prompt */
+  m32r_cmds.line_term =   "\r";			/* end-of-line terminator */
+  m32r_cmds.cmd_end =   NULL;			/* optional command terminator */
+  m32r_cmds.target =   &m32r_ops;		/* target operations */
+  m32r_cmds.stopbits =   SERIAL_1_STOPBITS;	/* number of stop bits */
+  m32r_cmds.regnames =   m32r_regnames;		/* registers names */
+  m32r_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_m32r_cmds */
+
+static void
+m32r_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &m32r_cmds, from_tty);
+}
+
+/* Mon2000 monitor (MSA2000 board) */
+
+static struct target_ops mon2000_ops;
+static struct monitor_ops mon2000_cmds;
+
+static void 
+init_mon2000_cmds(void)
+{
+  mon2000_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_REGISTER_VALUE_FIRST;
+  mon2000_cmds.init =   m32r_inits;		/* Init strings */
+  mon2000_cmds.cont =   "go\r";			/* continue command */
+  mon2000_cmds.step =   "step\r";			/* single step */
+  mon2000_cmds.stop =   NULL;			/* interrupt command */
+  mon2000_cmds.set_break =   "%x +bp\r";		/* set a breakpoint */
+  mon2000_cmds.clr_break =   "%x -bp\r";		/* clear a breakpoint */
+  mon2000_cmds.clr_all_break =   "bpoff\r";	/* clear all breakpoints */
+  mon2000_cmds.fill =   "%x %x %x fill\r";		/* fill (start length val) */
+  mon2000_cmds.setmem.cmdb =     "%x 1 %x fill\r";	/* setmem.cmdb (addr, value) */
+  mon2000_cmds.setmem.cmdw =     "%x 1 %x fillh\r";/* setmem.cmdw (addr, value) */
+  mon2000_cmds.setmem.cmdl =     "%x 1 %x fillw\r";/* setmem.cmdl (addr, value) */
+  mon2000_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  mon2000_cmds.setmem.resp_delim =     NULL;	/* setmem.resp_delim */
+  mon2000_cmds.setmem.term =     NULL;		/* setmem.term */
+  mon2000_cmds.setmem.term_cmd =     NULL;		/* setmem.term_cmd */
+  mon2000_cmds.getmem.cmdb =     "%x %x dump\r";	/* getmem.cmdb (addr, len) */
+  mon2000_cmds.getmem.cmdw =     NULL;		/* getmem.cmdw (addr, len) */
+  mon2000_cmds.getmem.cmdl =     NULL;		/* getmem.cmdl (addr, len) */
+  mon2000_cmds.getmem.cmdll =     NULL;		/* getmem.cmdll (addr, len) */
+  mon2000_cmds.getmem.resp_delim =     ": ";	/* getmem.resp_delim */
+  mon2000_cmds.getmem.term =     NULL;		/* getmem.term */
+  mon2000_cmds.getmem.term_cmd =     NULL	;	/* getmem.term_cmd */
+  mon2000_cmds.setreg.cmd =     "%x to %%%s\r";	/* setreg.cmd (name, value) */
+  mon2000_cmds.setreg.resp_delim =     NULL;	/* setreg.resp_delim */
+  mon2000_cmds.setreg.term =     NULL;		/* setreg.term */
+  mon2000_cmds.setreg.term_cmd =     NULL	;	/* setreg.term_cmd */
+  mon2000_cmds.getreg.cmd =     NULL;		/* getreg.cmd (name) */
+  mon2000_cmds.getreg.resp_delim =     NULL;	/* getreg.resp_delim */
+  mon2000_cmds.getreg.term =     NULL;		/* getreg.term */
+  mon2000_cmds.getreg.term_cmd =     NULL	;	/* getreg.term_cmd */
+  mon2000_cmds.dump_registers =   ".reg\r";	/* dump_registers */
+  mon2000_cmds.register_pattern =   "\\(\\w+\\) += \\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  mon2000_cmds.supply_register =   m32r_supply_register;	/* supply_register */
+  mon2000_cmds.load_routine =   NULL;		/* load_routine (defaults to SRECs) */
+  mon2000_cmds.load =   NULL;			/* download command */
+  mon2000_cmds.loadresp =   NULL;			/* load response */
+  mon2000_cmds.prompt =   "Mon2000>";			/* monitor command prompt */
+  mon2000_cmds.line_term =   "\r";			/* end-of-line terminator */
+  mon2000_cmds.cmd_end =   NULL;			/* optional command terminator */
+  mon2000_cmds.target =   &mon2000_ops;		/* target operations */
+  mon2000_cmds.stopbits =   SERIAL_1_STOPBITS;	/* number of stop bits */
+  mon2000_cmds.regnames =   m32r_regnames;		/* registers names */
+  mon2000_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_mon2000_cmds */
+
+static void
+mon2000_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &mon2000_cmds, from_tty);
+}
+
+#ifndef _MSC_VER
+
+/* Function: set_board_address
+   Tell the BootOne monitor what it's ethernet IP address is. */
+
+static void
+m32r_set_board_address (args, from_tty)
+     char *args;
+     int  from_tty;
+{
+  int resp_len;
+  char buf[1024];
+
+  if (args && *args)
+    {
+      monitor_printf ("ulip %s\n", args);
+      resp_len = monitor_expect_prompt (buf, sizeof(buf));
+      /* now parse the result for success */
+    }
+  else
+    error ("Requires argument (IP address for M32R-EVA board)");
+}
+
+/* Function: set_server_address
+   Tell the BootOne monitor what gdb's ethernet IP address is. */
+
+static void
+m32r_set_server_address (args, from_tty)
+     char *args;
+     int  from_tty;
+{
+  int resp_len;
+  char buf[1024];
+
+  if (args && *args)
+    {
+      monitor_printf ("uhip %s\n", args);
+      resp_len = monitor_expect_prompt (buf, sizeof(buf));
+      /* now parse the result for success */
+    }
+  else
+    error ("Requires argument (IP address of GDB's host computer)");
+}
+
+/* Function: set_download_path
+   Tell the BootOne monitor the default path for downloadable SREC files. */
+
+static void
+m32r_set_download_path (args, from_tty)
+     char *args;
+     int  from_tty;
+{
+  int resp_len;
+  char buf[1024];
+
+  if (args && *args)
+    {
+      monitor_printf ("up %s\n", args);
+      resp_len = monitor_expect_prompt (buf, sizeof(buf));
+      /* now parse the result for success */
+    }
+  else
+    error ("Requires argument (default path for downloadable SREC files)");
+}
+
+static void
+m32r_upload_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  bfd *abfd;
+  asection *s;
+  time_t start_time, end_time;	/* for timing of download */
+  extern int inferior_pid;
+  int resp_len, data_count = 0;
+  char buf[1024];
+  struct hostent *hostent;
+  struct in_addr inet_addr;
+
+  /* first check to see if there's an ethernet port! */
+  monitor_printf ("ust\r");
+  resp_len = monitor_expect_prompt (buf, sizeof(buf));
+  if (!strchr (buf, ':'))
+    error ("No ethernet connection!");
+
+  if (board_addr == 0)
+    {
+      /* scan second colon in the output from the "ust" command */
+      char * myIPaddress = strchr (strchr (buf, ':') + 1, ':') + 1;
+
+      while (isspace(*myIPaddress))
+	myIPaddress++;
+
+      if (!strncmp (myIPaddress, "0.0.", 4))    /* empty */
+	error ("Please use 'set board-address' to set the M32R-EVA board's IP address.");
+      if (strchr (myIPaddress, '('))
+	*(strchr (myIPaddress, '(')) = '\0';    /* delete trailing junk */
+      board_addr = strsave (myIPaddress);
+    }
+  if (server_addr == 0)
+    {
+      buf[0] = 0;
+      gethostname (buf, sizeof(buf));
+      if (buf[0] != 0)
+	hostent = gethostbyname (buf);
+      if (hostent != 0)
+	{
+#if 1
+	  memcpy (&inet_addr.s_addr, hostent->h_addr, 
+		  sizeof(inet_addr.s_addr));
+	  server_addr = (char *) inet_ntoa (inet_addr);
+#else
+	  server_addr = (char *) inet_ntoa (hostent->h_addr);
+#endif
+	}
+      if (server_addr == 0)	/* failed? */
+	error ("Need to know gdb host computer's IP address (use 'set server-address')");
+    }
+
+  if (args == 0 || args[0] == 0)	/* no args: upload the current file */
+    args = get_exec_file (1);
+
+  if (args[0] != '/' && download_path == 0)
+    if (current_directory)
+      download_path = strsave (current_directory);
+    else
+      error ("Need to know default download path (use 'set download-path')");
+
+  start_time = time (NULL);
+  monitor_printf ("uhip %s\r", server_addr);
+  resp_len = monitor_expect_prompt (buf, sizeof(buf));  /* parse result? */
+  monitor_printf ("ulip %s\r", board_addr);
+  resp_len = monitor_expect_prompt (buf, sizeof(buf));  /* parse result? */
+  if (args[0] != '/')
+    monitor_printf ("up %s\r", download_path);	/* use default path */
+  else
+    monitor_printf ("up\r");			/* rooted filename/path */
+  resp_len = monitor_expect_prompt (buf, sizeof(buf));  /* parse result? */
+
+  if (strrchr (args, '.') && !strcmp (strrchr (args, '.'), ".srec"))
+    monitor_printf ("ul %s\r", args);
+  else					/* add ".srec" suffix */
+    monitor_printf ("ul %s.srec\r", args);
+  resp_len = monitor_expect_prompt (buf, sizeof(buf));  /* parse result? */
+
+  if (buf[0] == 0 || strstr(buf, "complete") == 0)
+    error("Upload file not found: %s.srec\nCheck IP addresses and download path.", args);
+  else
+    printf_filtered (" -- Ethernet load complete.\n");
+
+  end_time = time (NULL);
+  if (abfd = bfd_openr (args, 0))
+    { /* Download is done -- print section statistics */
+      if (bfd_check_format (abfd, bfd_object) == 0)
+	{
+	  printf_filtered ("File is not an object file\n");
+	}
+      for (s = abfd->sections; s; s = s->next)
+	if (s->flags & SEC_LOAD)
+	  {
+	    bfd_size_type section_size = bfd_section_size (abfd, s);
+	    bfd_vma       section_base = bfd_section_lma  (abfd, s);
+	    unsigned int  buffer;
+
+	    data_count += section_size;
+
+	    printf_filtered ("Loading section %s, size 0x%lx lma ",
+			     bfd_section_name (abfd, s), section_size);
+	    print_address_numeric (section_base, 1, gdb_stdout);
+	    printf_filtered ("\n");
+	    gdb_flush (gdb_stdout);
+	  }
+      /* Finally, make the PC point at the start address */
+      write_pc (bfd_get_start_address (abfd));
+      report_transfer_performance (data_count, start_time, end_time);
+      printf_filtered ("Start address 0x%lx\n", bfd_get_start_address (abfd));
+    }
+  inferior_pid = 0;             /* No process now */
+
+  /* This is necessary because many things were based on the PC at the
+     time that we attached to the monitor, which is no longer valid
+     now that we have loaded new code (and just changed the PC).
+     Another way to do this might be to call normal_stop, except that
+     the stack may not be valid, and things would get horribly
+     confused... */
+
+  clear_symtab_users ();
+}
+
+#endif /* ! _MSC_VER */
+
+void
+_initialize_m32r_rom ()
+{
+  /* Initialize m32r RevC monitor target */
+  init_m32r_cmds () ;
+  init_monitor_ops (&m32r_ops);
+
+  m32r_ops.to_shortname = "m32r";
+  m32r_ops.to_longname = "m32r monitor";
+  m32r_ops.to_load = m32r_load_gen;	/* monitor lacks a download command */
+  m32r_ops.to_doc = "Debug via the m32r monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  m32r_ops.to_open = m32r_open;
+  add_target (&m32r_ops);
+
+  /* Initialize mon2000 monitor target */
+  init_mon2000_cmds ();
+  init_monitor_ops (&mon2000_ops);
+
+  mon2000_ops.to_shortname = "mon2000";
+  mon2000_ops.to_longname = "Mon2000 monitor";
+  mon2000_ops.to_load = m32r_load_gen;	/* monitor lacks a download command */
+  mon2000_ops.to_doc = "Debug via the Mon2000 monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  mon2000_ops.to_open = mon2000_open;
+  add_target (&mon2000_ops);
+
+#ifndef _MSC_VER
+  add_show_from_set
+    (add_set_cmd ("download-path", class_obscure, var_string,
+		  (char *) &download_path,
+		  "Set the default path for downloadable SREC files.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("board-address", class_obscure, var_string,
+		  (char *) &board_addr,
+		  "Set IP address for M32R-EVA target board.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("server-address", class_obscure, var_string,
+		  (char *) &server_addr,
+		  "Set IP address for download server (GDB's host computer).",
+		  &setlist),
+     &showlist);
+
+  add_com ("upload", class_obscure, m32r_upload_command,
+	   "Upload the srec file via the monitor's Ethernet upload capability."); 
+
+  add_com ("tload", class_obscure, m32r_load, "test upload command.");
+#endif
+}
diff --git a/gdb/m32r-stub.c b/gdb/m32r-stub.c
new file mode 100644
index 0000000..60c828f
--- /dev/null
+++ b/gdb/m32r-stub.c
@@ -0,0 +1,1685 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for M32R by Michael Snyder, Cygnus Support.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *  The external function exceptionHandler() is
+ *  used to attach a specific handler to a specific M32R vector number.
+ *  It should use the same privilege level it runs at.  It should
+ *  install it as an interrupt gate so that interrupts are masked
+ *  while the handler runs.
+ *
+ *  Because gdb will sometimes write to the stack area to execute function
+ *  calls, this program cannot rely on using the supervisor stack so it
+ *  uses it's own stack area reserved in the int array remcomStack.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *    XAA..AA,LLLL: Write LLLL binary bytes at address     OK or ENN
+ *                  AA..AA
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+extern void putDebugChar();	/* write a single character      */
+extern int getDebugChar();	/* read and return a single char */
+extern void exceptionHandler();	/* assign an exception handler   */
+
+/*****************************************************************************
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets 
+ */
+#define BUFMAX 400
+
+static char initialized;  /* boolean flag. != 0 means we've been initialized */
+
+int     remote_debug;
+/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */
+
+static const unsigned char hexchars[]="0123456789abcdef";
+
+#define NUMREGS 24
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES (NUMREGS * 4)
+enum regnames { R0,  R1,  R2,  R3,  R4,  R5,  R6,   R7,
+		R8,  R9,  R10, R11, R12, R13, R14,  R15,
+		PSW, CBR, SPI, SPU, BPC, PC,  ACCL, ACCH };
+
+enum SYS_calls {
+  	SYS_null, 
+	SYS_exit,
+	SYS_open,
+	SYS_close,
+	SYS_read,
+	SYS_write,
+	SYS_lseek,
+	SYS_unlink,
+	SYS_getpid,
+	SYS_kill,
+	SYS_fstat,
+	SYS_sbrk,
+	SYS_fork,
+	SYS_execve,
+	SYS_wait4,
+	SYS_link,
+	SYS_chdir,
+	SYS_stat,
+	SYS_utime,
+	SYS_chown,
+	SYS_chmod,
+	SYS_time,
+	SYS_pipe };
+
+static int registers[NUMREGS];
+
+#define STACKSIZE 8096
+static unsigned char remcomInBuffer[BUFMAX];
+static unsigned char remcomOutBuffer[BUFMAX];
+static int  remcomStack[STACKSIZE/sizeof(int)];
+static int*  stackPtr = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+static unsigned int save_vectors[18];	/* previous exception vectors */
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an error. */
+static volatile int mem_err = 0;
+
+/* Store the vector number here (since GDB only gets the signal
+   number through the usual means, and that's not very specific).  */
+int gdb_m32r_vector = -1;
+
+#if 0
+#include "syscall.h" /* for SYS_exit, SYS_write etc. */
+#endif
+
+/* Global entry points:
+ */
+
+extern void handle_exception(int);
+extern void set_debug_traps(void);
+extern void breakpoint(void);
+
+/* Local functions:
+ */
+
+static int  computeSignal(int);
+static void putpacket(unsigned char *);
+static void getpacket(unsigned char *);
+
+static unsigned char *mem2hex(unsigned char *, unsigned char *, int, int);
+static unsigned char *hex2mem(unsigned char *, unsigned char *, int, int);
+static int  hexToInt(unsigned char **, int *);
+static unsigned char *bin2mem(unsigned char *, unsigned char *, int, int);
+static void stash_registers(void);
+static void restore_registers(void);
+static int  prepare_to_step(int);
+static int  finish_from_step(void);
+
+static void gdb_error(char *, char *);
+static int  gdb_putchar(int), gdb_puts(char *), gdb_write(char *, int);
+
+static unsigned char *strcpy (unsigned char *, const unsigned char *);
+static int   strlen (const unsigned char *);
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ */
+
+void 
+handle_exception(int exceptionVector)
+{
+  int    sigval;
+  int    addr, length, i;
+  unsigned char * ptr;
+  unsigned char   buf[16];
+  int binary;
+
+  if (!finish_from_step())
+    return;		/* "false step": let the target continue */
+
+  gdb_m32r_vector = exceptionVector;
+
+  if (remote_debug)
+    {
+      mem2hex((unsigned char *) &exceptionVector, buf, 4, 0);
+      gdb_error("Handle exception %s, ", buf);
+      mem2hex((unsigned char *) &registers[PC], buf, 4, 0);
+      gdb_error("PC == 0x%s\n", buf);
+    }
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal( exceptionVector );
+
+  ptr = remcomOutBuffer;
+ 
+  *ptr++ = 'T';         /* notify gdb with signo, PC, FP and SP */
+  *ptr++ = hexchars[sigval >> 4];
+  *ptr++ = hexchars[sigval & 0xf];
+ 
+  *ptr++ = hexchars[PC >> 4];
+  *ptr++ = hexchars[PC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((unsigned char *)&registers[PC], ptr, 4, 0);     /* PC */
+  *ptr++ = ';';
+ 
+  *ptr++ = hexchars[R13 >> 4];
+  *ptr++ = hexchars[R13 & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((unsigned char *)&registers[R13], ptr, 4, 0);    /* FP */
+  *ptr++ = ';';
+ 
+  *ptr++ = hexchars[R15 >> 4];
+  *ptr++ = hexchars[R15 & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((unsigned char *)&registers[R15], ptr, 4, 0);    /* SP */
+  *ptr++ = ';';
+  *ptr++ = 0;
+ 
+  if (exceptionVector == 0)     /* simulated SYS call stuff */
+    {
+      mem2hex((unsigned char *) &registers[PC], buf, 4, 0);
+      switch (registers[R0]) {
+      case SYS_exit:
+	gdb_error("Target program has exited at %s\n", buf);
+	ptr = remcomOutBuffer;
+	*ptr++ = 'W';
+	sigval = registers[R1] & 0xff;
+	*ptr++ = hexchars[sigval >> 4];
+	*ptr++ = hexchars[sigval & 0xf];
+	*ptr++ = 0;
+	break;
+      case SYS_open:
+	gdb_error("Target attempts SYS_open call at %s\n", buf);
+	break;
+      case SYS_close:
+	gdb_error("Target attempts SYS_close call at %s\n", buf);
+	break;
+      case SYS_read:
+	gdb_error("Target attempts SYS_read call at %s\n", buf);
+	break;
+      case SYS_write:
+	if (registers[R1] == 1 ||       /* write to stdout  */
+	    registers[R1] == 2)		/* write to stderr  */
+	  {				/* (we can do that) */
+	    registers[R0] = gdb_write((void *) registers[R2], registers[R3]);
+	    return;
+	  }
+	else
+	  gdb_error("Target attempts SYS_write call at %s\n", buf);
+	break;
+      case SYS_lseek:
+	gdb_error("Target attempts SYS_lseek call at %s\n", buf);
+	break;
+      case SYS_unlink:
+	gdb_error("Target attempts SYS_unlink call at %s\n", buf);
+	break;
+      case SYS_getpid:
+	gdb_error("Target attempts SYS_getpid call at %s\n", buf);
+	break;
+      case SYS_kill:
+	gdb_error("Target attempts SYS_kill call at %s\n", buf);
+	break;
+      case SYS_fstat:
+	gdb_error("Target attempts SYS_fstat call at %s\n", buf);
+	break;
+      default:
+	gdb_error("Target attempts unknown SYS call at %s\n", buf);
+	break;
+      }
+    }
+
+  putpacket(remcomOutBuffer);
+
+  while (1==1) {
+    remcomOutBuffer[0] = 0;
+    getpacket(remcomInBuffer);
+    binary = 0;
+    switch (remcomInBuffer[0]) {
+      default:	/* Unknown code.  Return an empty reply message. */
+	break;
+      case 'R':
+	ptr = &remcomInBuffer[1];
+	if (hexToInt (&ptr, &addr))
+	  registers[PC] = addr;
+	strcpy(remcomOutBuffer, "OK");
+	break;
+      case '!':
+	strcpy(remcomOutBuffer, "OK");
+	break;
+    case 'X': /* XAA..AA,LLLL:<binary data>#cs */
+      binary = 1;
+    case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+      /* TRY TO READ '%x,%x:'.  IF SUCCEED, SET PTR = 0 */
+      {
+        ptr = &remcomInBuffer[1];
+        if (hexToInt(&ptr,&addr))
+          if (*(ptr++) == ',')
+            if (hexToInt(&ptr,&length))
+              if (*(ptr++) == ':')
+                {
+                  mem_err = 0;
+                  if (binary)
+                    bin2mem (ptr, (unsigned char *) addr, length, 1);
+                  else
+                    hex2mem(ptr, (unsigned char*) addr, length, 1);
+                  if (mem_err) {
+                    strcpy (remcomOutBuffer, "E03");
+                    gdb_error ("memory fault", "");
+                  } else {
+                    strcpy(remcomOutBuffer,"OK");
+                  }
+                  ptr = 0;
+                }
+        if (ptr)
+          {
+            strcpy(remcomOutBuffer,"E02");
+            gdb_error("malformed write memory command: %s",
+                      remcomInBuffer);
+          }
+      }
+	break;
+      case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+		/* TRY TO READ %x,%x.  IF SUCCEED, SET PTR = 0 */
+	ptr = &remcomInBuffer[1];
+	if (hexToInt(&ptr,&addr))
+	  if (*(ptr++) == ',')
+	    if (hexToInt(&ptr,&length))
+	      {
+		ptr = 0;
+		mem_err = 0;
+		mem2hex((unsigned char*) addr, remcomOutBuffer, length, 1);
+		if (mem_err) {
+		  strcpy (remcomOutBuffer, "E03");
+		  gdb_error ("memory fault", "");
+		}
+	      }
+	if (ptr)
+	  {
+	    strcpy(remcomOutBuffer,"E01");
+	    gdb_error("malformed read memory command: %s",
+			remcomInBuffer);
+	  }
+	break;
+      case '?': 
+	remcomOutBuffer[0] = 'S';
+	remcomOutBuffer[1] =  hexchars[sigval >> 4];
+	remcomOutBuffer[2] =  hexchars[sigval % 16];
+	remcomOutBuffer[3] = 0;
+	break;
+      case 'd': 
+	remote_debug = !(remote_debug);  /* toggle debug flag */
+	break;
+      case 'g': /* return the value of the CPU registers */
+	mem2hex((unsigned char*) registers, remcomOutBuffer, NUMREGBYTES, 0);
+	break;
+      case 'P': /* set the value of a single CPU register - return OK */
+	{
+	  int regno;
+
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt (&ptr, &regno) && *ptr++ == '=')
+	    if (regno >= 0 && regno < NUMREGS)
+	      {
+		int stackmode;
+
+		hex2mem (ptr, (unsigned char *) &registers[regno], 4, 0);
+		/*
+		 * Since we just changed a single CPU register, let's
+		 * make sure to keep the several stack pointers consistant.
+		 */
+		stackmode = registers[PSW] & 0x80;
+		if (regno == R15)	/* stack pointer changed */
+		  {			/* need to change SPI or SPU */
+		    if (stackmode == 0)
+		      registers[SPI] = registers[R15];
+		    else
+		      registers[SPU] = registers[R15];
+		  }
+		else if (regno == SPU)	/* "user" stack pointer changed */
+		  {
+		    if (stackmode != 0)	/* stack in user mode: copy SP */
+		      registers[R15] = registers[SPU];
+		  }
+		else if (regno == SPI)	/* "interrupt" stack pointer changed */
+		  {
+		    if (stackmode == 0)	/* stack in interrupt mode: copy SP */
+		      registers[R15] = registers[SPI];
+		  }
+		else if (regno == PSW)	/* stack mode may have changed! */
+		  {			/* force SP to either SPU or SPI */
+		    if (stackmode == 0)	/* stack in user mode */
+		      registers[R15] = registers[SPI];
+		    else		/* stack in interrupt mode */
+		      registers[R15] = registers[SPU];
+		  }
+		strcpy (remcomOutBuffer, "OK");
+		break;
+	      }
+	  strcpy (remcomOutBuffer, "P01");
+	  break;
+	}
+      case 'G': /* set the value of the CPU registers - return OK */
+	hex2mem(&remcomInBuffer[1], (unsigned char*) registers, NUMREGBYTES, 0);
+	strcpy(remcomOutBuffer,"OK");
+	break;
+      case 's': /* sAA..AA	Step one instruction from AA..AA(optional) */
+      case 'c': /* cAA..AA	Continue from address AA..AA(optional) */
+		/* try to read optional parameter, pc unchanged if no parm */
+	ptr = &remcomInBuffer[1];
+	if (hexToInt(&ptr,&addr))
+	  registers[ PC ] = addr;
+	
+	if (remcomInBuffer[0] == 's')	/* single-stepping */
+	  {
+	    if (!prepare_to_step(0))	/* set up for single-step */
+	      {
+		/* prepare_to_step has already emulated the target insn:
+		   Send SIGTRAP to gdb, don't resume the target at all.  */
+		ptr = remcomOutBuffer;
+		*ptr++ = 'T';           /* Simulate stopping with SIGTRAP */
+		*ptr++ = '0';
+		*ptr++ = '5';
+
+		*ptr++ = hexchars[PC >> 4];     /* send PC */
+		*ptr++ = hexchars[PC & 0xf];
+		*ptr++ = ':';
+		ptr = mem2hex((unsigned char *)&registers[PC], ptr, 4, 0);
+		*ptr++ = ';';
+
+		*ptr++ = hexchars[R13 >> 4];    /* send FP */
+		*ptr++ = hexchars[R13 & 0xf];
+		*ptr++ = ':';
+		ptr = mem2hex((unsigned char *)&registers[R13], ptr, 4, 0);
+		*ptr++ = ';';
+
+		*ptr++ = hexchars[R15 >> 4];    /* send SP */
+		*ptr++ = hexchars[R15 & 0xf];
+		*ptr++ = ':';
+		ptr = mem2hex((unsigned char *)&registers[R15], ptr, 4, 0);
+		*ptr++ = ';';
+		*ptr++ = 0;
+
+		break;	
+	      }
+	  }
+	else	/* continuing, not single-stepping */
+	  {
+	    /* OK, about to do a "continue".  First check to see if the 
+	       target pc is on an odd boundary (second instruction in the 
+	       word).  If so, we must do a single-step first, because 
+	       ya can't jump or return back to an odd boundary!  */
+	    if ((registers[PC] & 2) != 0)
+	      prepare_to_step(1);
+	  }
+	return;
+
+      case 'D':	/* Detach */
+	/* I am interpreting this to mean, release the board from control 
+	   by the remote stub.  To do this, I am restoring the original
+	   (or at least previous) exception vectors.
+	 */
+	for (i = 0; i < 18; i++)
+	  exceptionHandler (i, save_vectors[i]);
+	putpacket ("OK");
+	return;		/* continue the inferior */
+
+      case 'k': /* kill the program */
+	continue;
+      } /* switch */
+
+    /* reply to the request */
+    putpacket(remcomOutBuffer);
+  }
+}
+
+static int 
+hex(ch)
+     unsigned char ch;
+{
+  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
+  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
+  if ((ch >= 'A') && (ch <= 'F')) return (ch-'A'+10);
+  return (-1);
+}
+
+/* scan for the sequence $<data>#<checksum>     */
+
+static void 
+getpacket(buffer)
+     unsigned char * buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int  i;
+  int  count;
+  unsigned char ch;
+
+  do {
+    /* wait around for the start character, ignore all other characters */
+    while ((ch = getDebugChar()) != '$');
+    checksum = 0;
+    xmitcsum = -1;
+
+    count = 0;
+
+    /* now, read until a # or end of buffer is found */
+    while (count < BUFMAX) {
+      ch = getDebugChar();
+      
+      if (ch == '#' && (count == 0 || buffer[count-1] != 0x7d))
+        break;
+
+      checksum = checksum + ch;
+      buffer[count] = ch;
+      count = count + 1;
+      }
+    buffer[count] = 0;
+
+    if (ch == '#') {
+      xmitcsum = hex(getDebugChar()) << 4;
+      xmitcsum += hex(getDebugChar());
+      if (checksum != xmitcsum) {
+        if (remote_debug) {
+          unsigned char buf[16];
+
+          mem2hex((unsigned char *) &checksum, buf, 4, 0);
+          gdb_error("Bad checksum: my count = %s, ", buf);
+          mem2hex((unsigned char *) &xmitcsum, buf, 4, 0);
+          gdb_error("sent count = %s\n", buf);
+          gdb_error(" -- Bad buffer: \"%s\"\n", buffer); 
+        }
+
+        putDebugChar('-');  /* failed checksum */
+      } else {
+	putDebugChar('+');  /* successful transfer */
+	/* if a sequence char is present, reply the sequence ID */
+	if (buffer[2] == ':') {
+	  putDebugChar( buffer[0] );
+	  putDebugChar( buffer[1] );
+	  /* remove sequence chars from buffer */
+	  count = strlen(buffer);
+	  for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
+	}
+      }
+    }
+  } while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer.  */
+
+static void 
+putpacket(buffer)
+     unsigned char *buffer;
+{
+  unsigned char checksum;
+  int  count;
+  char ch;
+
+  /*  $<packet info>#<checksum>. */
+  do {
+    putDebugChar('$');
+    checksum = 0;
+    count    = 0;
+
+    while (ch=buffer[count]) {
+      putDebugChar(ch);
+      checksum += ch;
+      count += 1;
+    }
+    putDebugChar('#');
+    putDebugChar(hexchars[checksum >> 4]);
+    putDebugChar(hexchars[checksum % 16]);
+  } while (getDebugChar() != '+');
+}
+
+/* Address of a routine to RTE to if we get a memory fault.  */
+
+static void (*volatile mem_fault_routine)() = 0;
+
+static void
+set_mem_err ()
+{
+  mem_err = 1;
+}
+
+/* Check the address for safe access ranges.  As currently defined,
+   this routine will reject the "expansion bus" address range(s).
+   To make those ranges useable, someone must implement code to detect
+   whether there's anything connected to the expansion bus. */
+
+static int
+mem_safe (addr)
+     unsigned char *addr;
+{
+#define BAD_RANGE_ONE_START	((unsigned char *) 0x600000)
+#define BAD_RANGE_ONE_END	((unsigned char *) 0xa00000)
+#define BAD_RANGE_TWO_START	((unsigned char *) 0xff680000)
+#define BAD_RANGE_TWO_END	((unsigned char *) 0xff800000)
+
+  if (addr < BAD_RANGE_ONE_START)	return 1;	/* safe */
+  if (addr < BAD_RANGE_ONE_END)		return 0;	/* unsafe */
+  if (addr < BAD_RANGE_TWO_START)	return 1;	/* safe */
+  if (addr < BAD_RANGE_TWO_END)		return 0;	/* unsafe */
+}
+
+/* These are separate functions so that they are so short and sweet
+   that the compiler won't save any registers (if there is a fault
+   to mem_fault, they won't get restored, so there better not be any
+   saved).  */
+static int
+get_char (addr)
+     unsigned char *addr;
+{
+#if 1
+  if (mem_fault_routine && !mem_safe(addr))
+    {
+      mem_fault_routine ();
+      return 0;
+    }
+#endif
+  return *addr;
+}
+
+static void
+set_char (addr, val)
+     unsigned char *addr;
+     unsigned char val;
+{
+#if 1
+  if (mem_fault_routine && !mem_safe (addr))
+    {
+      mem_fault_routine ();
+      return;
+    }
+#endif
+  *addr = val;
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+   Return a pointer to the last char put in buf (null).
+   If MAY_FAULT is non-zero, then we should set mem_err in response to
+   a fault; if zero treat a fault like any other fault in the stub.  */
+
+static unsigned char *
+mem2hex(mem, buf, count, may_fault)
+     unsigned char* mem;
+     unsigned char* buf;
+     int   count;
+     int   may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  if (may_fault)
+    mem_fault_routine = set_mem_err;
+  for (i=0;i<count;i++) {
+    ch = get_char (mem++);
+    if (may_fault && mem_err)
+      return (buf);
+    *buf++ = hexchars[ch >> 4];
+    *buf++ = hexchars[ch % 16];
+  }
+  *buf = 0;
+  if (may_fault)
+    mem_fault_routine = 0;
+  return(buf);
+}
+
+/* Convert the hex array pointed to by buf into binary to be placed in mem.
+   Return a pointer to the character AFTER the last byte written. */
+
+static unsigned char* 
+hex2mem(buf, mem, count, may_fault)
+     unsigned char* buf;
+     unsigned char* mem;
+     int   count;
+     int   may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  if (may_fault)
+    mem_fault_routine = set_mem_err;
+  for (i=0;i<count;i++) {
+    ch = hex(*buf++) << 4;
+    ch = ch + hex(*buf++);
+    set_char (mem++, ch);
+    if (may_fault && mem_err)
+      return (mem);
+  }
+  if (may_fault)
+    mem_fault_routine = 0;
+  return(mem);
+}
+
+/* Convert the binary stream in BUF to memory.
+
+   Gdb will escape $, #, and the escape char (0x7d).
+   COUNT is the total number of bytes to write into
+   memory. */
+static unsigned char *
+bin2mem (buf, mem, count, may_fault)
+     unsigned char *buf;
+     unsigned char *mem;
+     int   count;
+     int   may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  if (may_fault)
+    mem_fault_routine = set_mem_err;
+  for (i = 0; i < count; i++)
+    {
+      /* Check for any escaped characters. Be paranoid and
+         only unescape chars that should be escaped. */
+      if (*buf == 0x7d)
+        {
+          switch (*(buf+1))
+            {
+            case 0x3:  /* # */
+            case 0x4:  /* $ */
+            case 0x5d: /* escape char */
+              buf++;
+              *buf += 0x20;
+              break;
+            default:
+              /* nothing */
+              break;
+            }
+        }
+
+      set_char (mem++, *buf++);
+
+      if (may_fault && mem_err)
+        return mem;
+    }
+
+  if (may_fault)
+    mem_fault_routine = 0;
+  return mem;
+}
+
+/* this function takes the m32r exception vector and attempts to
+   translate this number into a unix compatible signal value */
+
+static int 
+computeSignal(exceptionVector)
+     int exceptionVector;
+{
+  int sigval;
+  switch (exceptionVector) {
+    case 0  : sigval = 23; break; /* I/O trap                    */
+    case 1  : sigval = 5;  break; /* breakpoint                  */
+    case 2  : sigval = 5;  break; /* breakpoint                  */
+    case 3  : sigval = 5;  break; /* breakpoint                  */
+    case 4  : sigval = 5;  break; /* breakpoint                  */
+    case 5  : sigval = 5;  break; /* breakpoint                  */
+    case 6  : sigval = 5;  break; /* breakpoint                  */
+    case 7  : sigval = 5;  break; /* breakpoint                  */
+    case 8  : sigval = 5;  break; /* breakpoint                  */
+    case 9  : sigval = 5;  break; /* breakpoint                  */
+    case 10 : sigval = 5;  break; /* breakpoint                  */
+    case 11 : sigval = 5;  break; /* breakpoint                  */
+    case 12 : sigval = 5;  break; /* breakpoint                  */
+    case 13 : sigval = 5;  break; /* breakpoint                  */
+    case 14 : sigval = 5;  break; /* breakpoint                  */
+    case 15 : sigval = 5;  break; /* breakpoint                  */
+    case 16 : sigval = 10; break; /* BUS ERROR (alignment)       */
+    case 17 : sigval = 2;  break; /* INTerrupt                   */
+    default : sigval = 7;  break; /* "software generated"        */
+  }
+  return (sigval);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+static int 
+hexToInt(ptr, intValue)
+     unsigned char **ptr;
+     int *intValue;
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+  while (**ptr)
+    {
+      hexValue = hex(**ptr);
+      if (hexValue >=0)
+        {
+	  *intValue = (*intValue <<4) | hexValue;
+	  numChars ++;
+        }
+      else
+	break;
+      (*ptr)++;
+    }
+  return (numChars);
+}
+
+/*
+  Table of branch instructions:
+  
+  10B6		RTE	return from trap or exception
+  1FCr		JMP	jump
+  1ECr		JL	jump and link
+  7Fxx		BRA	branch
+  FFxxxxxx	BRA	branch (long)
+  B09rxxxx	BNEZ	branch not-equal-zero
+  Br1rxxxx	BNE	branch not-equal
+  7Dxx		BNC	branch not-condition
+  FDxxxxxx	BNC	branch not-condition (long)
+  B0Arxxxx	BLTZ	branch less-than-zero
+  B0Crxxxx	BLEZ	branch less-equal-zero
+  7Exx		BL	branch and link
+  FExxxxxx	BL	branch and link (long)
+  B0Drxxxx	BGTZ	branch greater-than-zero
+  B0Brxxxx	BGEZ	branch greater-equal-zero
+  B08rxxxx	BEQZ	branch equal-zero
+  Br0rxxxx	BEQ	branch equal
+  7Cxx		BC	branch condition
+  FCxxxxxx	BC	branch condition (long)
+  */
+
+static int 
+isShortBranch(instr)
+     unsigned char *instr;
+{
+  unsigned char instr0 = instr[0] & 0x7F;		/* mask off high bit */
+
+  if (instr0 == 0x10 && instr[1] == 0xB6)	/* RTE */
+    return 1;		/* return from trap or exception */
+
+  if (instr0 == 0x1E || instr0 == 0x1F)		/* JL or JMP */
+    if ((instr[1] & 0xF0) == 0xC0)
+      return 2;					/* jump thru a register */
+
+  if (instr0 == 0x7C || instr0 == 0x7D || 	/* BC, BNC, BL, BRA */
+      instr0 == 0x7E || instr0 == 0x7F)
+    return 3;					/* eight bit PC offset */
+
+  return 0;
+}
+
+static int
+isLongBranch(instr)
+     unsigned char *instr;
+{
+  if (instr[0] == 0xFC || instr[0] == 0xFD ||	/* BRA, BNC, BL, BC */
+      instr[0] == 0xFE || instr[0] == 0xFF)	/* 24 bit relative */
+    return 4;
+  if ((instr[0] & 0xF0) == 0xB0)		/* 16 bit relative */
+    {
+      if ((instr[1] & 0xF0) == 0x00 || 		/* BNE, BEQ */
+	  (instr[1] & 0xF0) == 0x10)
+	return 5;
+      if (instr[0] == 0xB0)	/* BNEZ, BLTZ, BLEZ, BGTZ, BGEZ, BEQZ */
+	if ((instr[1] & 0xF0) == 0x80 || (instr[1] & 0xF0) == 0x90 || 
+	    (instr[1] & 0xF0) == 0xA0 || (instr[1] & 0xF0) == 0xB0 ||
+	    (instr[1] & 0xF0) == 0xC0 || (instr[1] & 0xF0) == 0xD0)
+	  return 6;
+    }
+  return 0;
+}
+
+/* if address is NOT on a 4-byte boundary, or high-bit of instr is zero, 
+   then it's a 2-byte instruction, else it's a 4-byte instruction.  */
+
+#define INSTRUCTION_SIZE(addr) \
+    ((((int) addr & 2) || (((unsigned char *) addr)[0] & 0x80) == 0) ? 2 : 4)
+
+static int
+isBranch(instr)
+     unsigned char *instr;
+{
+  if (INSTRUCTION_SIZE(instr) == 2)
+    return isShortBranch(instr);
+  else
+    return isLongBranch(instr);
+}
+
+static int
+willBranch(instr, branchCode)
+     unsigned char *instr;
+{
+  switch (branchCode) 
+    {
+    case 0:	return 0;	/* not a branch */
+    case 1:	return 1;	/* RTE */
+    case 2:	return 1;	/* JL or JMP    */
+    case 3:			/* BC, BNC, BL, BRA (short) */
+    case 4:			/* BC, BNC, BL, BRA (long) */
+      switch (instr[0] & 0x0F) 
+	{
+	case 0xC:		/* Branch if Condition Register */
+	  return (registers[CBR] != 0);
+	case 0xD:		/* Branch if NOT Condition Register */
+	  return (registers[CBR] == 0);
+	case 0xE:		/* Branch and Link */
+	case 0xF:		/* Branch (unconditional) */
+	  return 1;
+	default:		/* oops? */
+	  return 0;
+	}
+    case 5: 			/* BNE, BEQ */
+      switch (instr[1] & 0xF0) 
+	{
+	case 0x00:		/* Branch if r1 equal to r2 */
+	  return (registers[instr[0] & 0x0F] == registers[instr[1] & 0x0F]);
+	case 0x10:		/* Branch if r1 NOT equal to r2 */
+	  return (registers[instr[0] & 0x0F] != registers[instr[1] & 0x0F]);
+	default:		/* oops? */
+	  return 0;
+	}
+    case 6: 			/* BNEZ, BLTZ, BLEZ, BGTZ, BGEZ ,BEQZ */
+      switch (instr[1] & 0xF0) 
+	{
+	case 0x80:		/* Branch if reg equal to zero */
+	  return (registers[instr[1] & 0x0F] == 0);
+	case 0x90:		/* Branch if reg NOT equal to zero */
+	  return (registers[instr[1] & 0x0F] != 0);
+	case 0xA0:		/* Branch if reg less than zero */
+	  return (registers[instr[1] & 0x0F] < 0);
+	case 0xB0:		/* Branch if reg greater or equal to zero */
+	  return (registers[instr[1] & 0x0F] >= 0);
+	case 0xC0:		/* Branch if reg less than or equal to zero */
+	  return (registers[instr[1] & 0x0F] <= 0);
+	case 0xD0:		/* Branch if reg greater than zero */
+	  return (registers[instr[1] & 0x0F] > 0);
+	default:		/* oops? */
+	  return 0;
+	}
+    default:			/* oops? */
+      return 0;
+    }
+}
+
+static int 
+branchDestination(instr, branchCode) 
+     unsigned char *instr;
+{ 
+  switch (branchCode) { 
+  default: 
+  case 0:					/* not a branch */ 
+    return 0;
+  case 1:					/* RTE */ 
+    return registers[BPC] & ~3; 		/* pop BPC into PC */
+  case 2: 					/* JL or JMP */ 
+    return registers[instr[1] & 0x0F] & ~3;	/* jump thru a register */ 
+  case 3: 		/* BC, BNC, BL, BRA (short, 8-bit relative offset) */ 
+    return (((int) instr) & ~3) + ((unsigned char) instr[1] << 2);
+  case 4: 		/* BC, BNC, BL, BRA (long, 24-bit relative offset) */ 
+    return ((int) instr + 
+	    ((((unsigned char) instr[1] << 16) | (instr[2] << 8) | (instr[3])) << 2)); 
+  case 5: 		/* BNE, BEQ (16-bit relative offset) */ 
+  case 6: 		/* BNEZ, BLTZ, BLEZ, BGTZ, BGEZ ,BEQZ (ditto) */ 
+    return ((int) instr + ((((unsigned char) instr[2] << 8) | (instr[3])) << 2)); 
+  }
+
+  /* An explanatory note: in the last three return expressions, I have
+     cast the most-significant byte of the return offset to char.
+     What this accomplishes is sign extension.  If the other
+     less-significant bytes were signed as well, they would get sign
+     extended too and, if negative, their leading bits would clobber
+     the bits of the more-significant bytes ahead of them.  There are
+     other ways I could have done this, but sign extension from
+     odd-sized integers is always a pain. */
+}
+
+static void
+branchSideEffects(instr, branchCode)
+     unsigned char *instr;
+     int branchCode;
+{
+  switch (branchCode)
+    {
+    case 1:			/* RTE */
+      return;			/* I <THINK> this is already handled... */
+    case 2:			/* JL (or JMP) */
+    case 3:			/* BL (or BC, BNC, BRA) */
+    case 4:
+      if ((instr[0] & 0x0F) == 0x0E)		/* branch/jump and link */
+	registers[R14] = (registers[PC] & ~3) + 4;
+      return;
+    default:			/* any other branch has no side effects */
+      return;
+    }
+}
+
+static struct STEPPING_CONTEXT {
+  int stepping;			/* true when we've started a single-step */
+  unsigned long  target_addr;	/* the instr we're trying to execute */
+  unsigned long  target_size;	/* the size of the target instr */
+  unsigned long  noop_addr;	/* where we've inserted a no-op, if any */
+  unsigned long  trap1_addr;	/* the trap following the target instr */
+  unsigned long  trap2_addr;	/* the trap at a branch destination, if any */
+  unsigned short noop_save;	/* instruction overwritten by our no-op */
+  unsigned short trap1_save;	/* instruction overwritten by trap1 */
+  unsigned short trap2_save;	/* instruction overwritten by trap2 */
+  unsigned short continue_p;	/* true if NOT returning to gdb after step */
+} stepping;
+
+/* Function: prepare_to_step
+   Called from handle_exception to prepare the user program to single-step.
+   Places a trap instruction after the target instruction, with special 
+   extra handling for branch instructions and for instructions in the 
+   second half-word of a word.  
+
+   Returns: True  if we should actually execute the instruction; 
+	    False if we are going to emulate executing the instruction,
+	    in which case we simply report to GDB that the instruction 
+	    has already been executed.  */
+
+#define TRAP1  0x10f1;	/* trap #1 instruction */
+#define NOOP   0x7000;  /* noop    instruction */
+
+static unsigned short trap1 = TRAP1;
+static unsigned short noop  = NOOP;
+
+static int
+prepare_to_step(continue_p)
+     int continue_p;	/* if this isn't REALLY a single-step (see below) */
+{
+  unsigned long pc = registers[PC];
+  int branchCode   = isBranch((unsigned char *) pc);
+  unsigned char *p;
+
+  /* zero out the stepping context 
+     (paranoia -- it should already be zeroed) */
+  for (p = (unsigned char *) &stepping;
+       p < ((unsigned char *) &stepping) + sizeof(stepping);
+       p++)
+    *p = 0;
+
+  if (branchCode != 0)			/* next instruction is a branch */
+    {
+      branchSideEffects((unsigned char *) pc, branchCode);
+      if (willBranch((unsigned char *)pc, branchCode))
+	registers[PC] = branchDestination((unsigned char *) pc, branchCode);
+      else
+	registers[PC] = pc + INSTRUCTION_SIZE(pc);
+      return 0;			/* branch "executed" -- just notify GDB */
+    }
+  else if (((int) pc & 2) != 0)		/* "second-slot" instruction */
+    {
+      /* insert no-op before pc */
+      stepping.noop_addr  =  pc - 2;
+      stepping.noop_save  = *(unsigned short *) stepping.noop_addr;
+      *(unsigned short *) stepping.noop_addr  = noop;
+      /* insert trap  after  pc */
+      stepping.trap1_addr =  pc + 2;
+      stepping.trap1_save = *(unsigned short *) stepping.trap1_addr;
+      *(unsigned short *) stepping.trap1_addr = trap1;
+    }
+  else					/* "first-slot" instruction */
+    {
+      /* insert trap  after  pc */
+      stepping.trap1_addr = pc + INSTRUCTION_SIZE(pc);	
+      stepping.trap1_save = *(unsigned short *) stepping.trap1_addr;
+      *(unsigned short *) stepping.trap1_addr = trap1;
+    }
+  /* "continue_p" means that we are actually doing a continue, and not 
+     being requested to single-step by GDB.  Sometimes we have to do
+     one single-step before continuing, because the PC is on a half-word
+     boundary.  There's no way to simply resume at such an address.  */
+  stepping.continue_p = continue_p;
+  stepping.stepping = 1;		/* starting a single-step */
+  return 1;
+}
+
+/* Function: finish_from_step
+   Called from handle_exception to finish up when the user program 
+   returns from a single-step.  Replaces the instructions that had
+   been overwritten by traps or no-ops, 
+
+   Returns: True  if we should notify GDB that the target stopped.
+	    False if we only single-stepped because we had to before we
+	    could continue (ie. we were trying to continue at a 
+	    half-word boundary).  In that case don't notify GDB:
+	    just "continue continuing".  */
+
+static int
+finish_from_step()
+{
+  if (stepping.stepping)	/* anything to do? */
+    {
+      int continue_p = stepping.continue_p;
+      unsigned char *p;
+
+      if (stepping.noop_addr)	/* replace instr "under" our no-op */
+	*(unsigned short *) stepping.noop_addr  = stepping.noop_save;
+      if (stepping.trap1_addr)	/* replace instr "under" our trap  */
+	*(unsigned short *) stepping.trap1_addr = stepping.trap1_save;
+      if (stepping.trap2_addr)  /* ditto our other trap, if any    */
+	*(unsigned short *) stepping.trap2_addr = stepping.trap2_save;
+
+      for (p = (unsigned char *) &stepping;	/* zero out the stepping context */
+	   p < ((unsigned char *) &stepping) + sizeof(stepping);
+	   p++)
+	*p = 0;
+
+      return !(continue_p);
+    }
+  else 	/* we didn't single-step, therefore this must be a legitimate stop */
+    return 1;
+}
+
+struct PSWreg {		/* separate out the bit flags in the PSW register */
+  int pad1 : 16;
+  int bsm  : 1;
+  int bie  : 1;
+  int pad2 : 5;
+  int bc   : 1;
+  int sm   : 1;
+  int ie   : 1;
+  int pad3 : 5;
+  int c    : 1;
+} *psw;
+
+/* Upon entry the value for LR to save has been pushed.
+   We unpush that so that the value for the stack pointer saved is correct.
+   Upon entry, all other registers are assumed to have not been modified
+   since the interrupt/trap occured.  */
+
+asm ("
+stash_registers:
+	push r0
+	push r1
+	seth r1, #shigh(registers)
+	add3 r1, r1, #low(registers)
+	pop r0		; r1
+	st r0, @(4,r1)
+	pop r0		; r0
+	st r0, @r1
+	addi r1, #4	; only add 4 as subsequent saves are `pre inc'
+	st r2, @+r1
+	st r3, @+r1
+	st r4, @+r1
+	st r5, @+r1
+	st r6, @+r1
+	st r7, @+r1
+	st r8, @+r1
+	st r9, @+r1
+	st r10, @+r1
+	st r11, @+r1
+	st r12, @+r1
+	st r13, @+r1    ; fp
+	pop r0		; lr (r14)
+	st r0, @+r1
+	st sp, @+r1	; sp contains right value at this point
+	mvfc r0, cr0
+	st r0, @+r1	; cr0 == PSW
+	mvfc r0, cr1
+	st r0, @+r1	; cr1 == CBR
+	mvfc r0, cr2
+	st r0, @+r1	; cr2 == SPI
+	mvfc r0, cr3
+	st r0, @+r1	; cr3 == SPU
+	mvfc r0, cr6
+	st r0, @+r1	; cr6 == BPC
+	st r0, @+r1	; PC  == BPC
+	mvfaclo r0
+	st r0, @+r1	; ACCL
+	mvfachi r0
+	st r0, @+r1	; ACCH
+	jmp lr");
+
+/* C routine to clean up what stash_registers did.
+   It is called after calling stash_registers.
+   This is separate from stash_registers as we want to do this in C
+   but doing stash_registers in C isn't straightforward.  */
+
+static void
+cleanup_stash ()
+{
+  psw = (struct PSWreg *) &registers[PSW];	/* fields of PSW register */
+  psw->sm = psw->bsm;		/* fix up pre-trap values of psw fields */
+  psw->ie = psw->bie;
+  psw->c  = psw->bc;
+  registers[CBR] = psw->bc;		/* fix up pre-trap "C" register */
+
+#if 0 /* FIXME: Was in previous version.  Necessary?
+	 (Remember that we use the "rte" insn to return from the
+	 trap/interrupt so the values of bsm, bie, bc are important.  */
+  psw->bsm = psw->bie = psw->bc = 0;	/* zero post-trap values */
+#endif
+
+  /* FIXME: Copied from previous version.  This can probably be deleted
+     since methinks stash_registers has already done this.  */
+  registers[PC] = registers[BPC];	/* pre-trap PC */
+
+  /* FIXME: Copied from previous version.  Necessary?  */
+  if (psw->sm)			/* copy R15 into (psw->sm ? SPU : SPI) */
+    registers[SPU] = registers[R15];
+  else
+    registers[SPI] = registers[R15];
+}
+
+asm ("
+restore_and_return:
+	seth r0, #shigh(registers+8)
+	add3 r0, r0, #low(registers+8)
+	ld r2, @r0+	; restore r2
+	ld r3, @r0+	; restore r3
+	ld r4, @r0+	; restore r4
+	ld r5, @r0+	; restore r5
+	ld r6, @r0+	; restore r6
+	ld r7, @r0+	; restore r7
+	ld r8, @r0+	; restore r8
+	ld r9, @r0+	; restore r9
+	ld r10, @r0+	; restore r10
+	ld r11, @r0+	; restore r11
+	ld r12, @r0+	; restore r12
+	ld r13, @r0+	; restore r13
+	ld r14, @r0+	; restore r14
+	ld r15, @r0+	; restore r15
+	ld r1, @r0+	; restore cr0 == PSW
+	mvtc r1, cr0
+	ld r1, @r0+	; restore cr1 == CBR (no-op, because it's read only)
+	mvtc r1, cr1
+	ld r1, @r0+	; restore cr2 == SPI
+	mvtc r1, cr2
+	ld r1, @r0+	; restore cr3 == SPU
+	mvtc r1, cr3
+	addi r0, #4	; skip BPC
+	ld r1, @r0+	; restore cr6 (BPC) == PC
+	mvtc r1, cr6
+	ld r1, @r0+	; restore ACCL
+	mvtaclo r1
+	ld r1, @r0+	; restore ACCH
+	mvtachi r1
+	seth r0, #shigh(registers)
+	add3 r0, r0, #low(registers)
+	ld r1, @(4,r0)	; restore r1
+	ld r0, @r0	; restore r0
+	rte");
+
+/* General trap handler, called after the registers have been stashed.
+   NUM is the trap/exception number.  */
+
+static void
+process_exception (num)
+     int num;
+{
+  cleanup_stash ();
+  asm volatile ("
+	seth r1, #shigh(stackPtr)
+	add3 r1, r1, #low(stackPtr)
+	ld r15, @r1		; setup local stack (protect user stack)
+	mv r0, %0
+	bl handle_exception
+	bl restore_and_return"
+		: : "r" (num) : "r0", "r1");
+}
+
+void _catchException0 ();
+
+asm ("
+_catchException0:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #0
+	bl process_exception");
+
+void _catchException1 ();
+
+asm ("
+_catchException1:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	bl cleanup_stash
+	seth r1, #shigh(stackPtr)
+	add3 r1, r1, #low(stackPtr)
+	ld r15, @r1		; setup local stack (protect user stack)
+	seth r1, #shigh(registers + 21*4) ; PC
+	add3 r1, r1, #low(registers + 21*4)
+	ld r0, @r1
+	addi r0, #-4		; back up PC for breakpoint trap.
+	st r0, @r1		; FIXME: what about bp in right slot?
+	ldi r0, #1
+	bl handle_exception
+	bl restore_and_return");
+
+void _catchException2 ();
+
+asm ("
+_catchException2:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #2
+	bl process_exception");
+
+void _catchException3 ();
+
+asm ("
+_catchException3:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #3
+	bl process_exception");
+
+void _catchException4 ();
+
+asm ("
+_catchException4:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #4
+	bl process_exception");
+
+void _catchException5 ();
+
+asm ("
+_catchException5:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #5
+	bl process_exception");
+
+void _catchException6 ();
+
+asm ("
+_catchException6:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #6
+	bl process_exception");
+
+void _catchException7 ();
+
+asm ("
+_catchException7:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #7
+	bl process_exception");
+
+void _catchException8 ();
+
+asm ("
+_catchException8:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #8
+	bl process_exception");
+
+void _catchException9 ();
+
+asm ("
+_catchException9:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #9
+	bl process_exception");
+
+void _catchException10 ();
+
+asm ("
+_catchException10:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #10
+	bl process_exception");
+
+void _catchException11 ();
+
+asm ("
+_catchException11:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #11
+	bl process_exception");
+
+void _catchException12 ();
+
+asm ("
+_catchException12:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #12
+	bl process_exception");
+
+void _catchException13 ();
+
+asm ("
+_catchException13:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #13
+	bl process_exception");
+
+void _catchException14 ();
+
+asm ("
+_catchException14:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #14
+	bl process_exception");
+
+void _catchException15 ();
+
+asm ("
+_catchException15:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #15
+	bl process_exception");
+
+void _catchException16 ();
+
+asm ("
+_catchException16:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #16
+	bl process_exception");
+
+void _catchException17 ();
+
+asm ("
+_catchException17:
+	push lr
+	bl stash_registers
+	; Note that at this point the pushed value of `lr' has been popped
+	ldi r0, #17
+	bl process_exception");
+
+
+/* this function is used to set up exception handlers for tracing and
+   breakpoints */
+void 
+set_debug_traps()
+{
+  /*  extern void remcomHandler(); */
+  int i;
+
+  for (i = 0; i < 18; i++)		/* keep a copy of old vectors */
+    if (save_vectors[i] == 0)		/* only copy them the first time */
+      save_vectors[i] = getExceptionHandler (i);
+
+  stackPtr  = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+  exceptionHandler (0, _catchException0);
+  exceptionHandler (1, _catchException1);
+  exceptionHandler (2, _catchException2);
+  exceptionHandler (3, _catchException3);
+  exceptionHandler (4, _catchException4);
+  exceptionHandler (5, _catchException5);
+  exceptionHandler (6, _catchException6);
+  exceptionHandler (7, _catchException7);
+  exceptionHandler (8, _catchException8);
+  exceptionHandler (9, _catchException9);
+  exceptionHandler (10, _catchException10);
+  exceptionHandler (11, _catchException11);
+  exceptionHandler (12, _catchException12);
+  exceptionHandler (13, _catchException13);
+  exceptionHandler (14, _catchException14);
+  exceptionHandler (15, _catchException15);
+  exceptionHandler (16, _catchException16);
+  /*  exceptionHandler (17, _catchException17); */
+
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+  putDebugChar ('+');
+
+  initialized = 1;
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+#define BREAKPOINT() asm volatile ("	trap #2");
+
+void 
+breakpoint()
+{
+  if (initialized)
+    BREAKPOINT();
+}
+
+/* STDOUT section:
+   Stuff pertaining to simulating stdout by sending chars to gdb to be echoed.
+   Functions: gdb_putchar(char ch)
+              gdb_puts(char *str)
+              gdb_write(char *str, int len)
+              gdb_error(char *format, char *parm)
+	      */
+ 
+/* Function: gdb_putchar(int)
+   Make gdb write a char to stdout.
+   Returns: the char */
+ 
+static int
+gdb_putchar(ch)
+     int ch;
+{
+  char buf[4];
+ 
+  buf[0] = 'O';
+  buf[1] = hexchars[ch >> 4];
+  buf[2] = hexchars[ch & 0x0F];
+  buf[3] = 0;
+  putpacket(buf);
+  return ch;
+}
+ 
+/* Function: gdb_write(char *, int)
+   Make gdb write n bytes to stdout (not assumed to be null-terminated).
+   Returns: number of bytes written */
+ 
+static int
+gdb_write(data, len)
+     char *data;
+     int len;
+{
+  char *buf, *cpy;
+  int i;
+ 
+  buf = remcomOutBuffer;
+  buf[0] = 'O';
+  i = 0;
+  while (i < len)
+    {
+      for (cpy = buf+1; 
+	   i < len && cpy < buf + sizeof(remcomOutBuffer) - 3; 
+	   i++)
+	{
+	  *cpy++ = hexchars[data[i] >> 4];
+	  *cpy++ = hexchars[data[i] & 0x0F];
+	}
+      *cpy = 0;
+      putpacket(buf);
+    }
+  return len;
+}
+
+/* Function: gdb_puts(char *)
+   Make gdb write a null-terminated string to stdout.
+   Returns: the length of the string */
+ 
+static int
+gdb_puts(str)
+     char *str;
+{
+  return gdb_write(str, strlen(str));
+}
+ 
+/* Function: gdb_error(char *, char *)
+   Send an error message to gdb's stdout.
+   First string may have 1 (one) optional "%s" in it, which
+   will cause the optional second string to be inserted.  */
+ 
+static void
+gdb_error(format, parm)
+     char * format;
+     char * parm;
+{
+  char buf[400], *cpy;
+  int len;
+ 
+  if (remote_debug)
+    {
+      if (format && *format)
+	len = strlen(format);
+      else
+	return;             /* empty input */
+
+      if (parm && *parm)
+	len += strlen(parm);
+ 
+      for (cpy = buf; *format; )
+	{
+	  if (format[0] == '%' && format[1] == 's') /* include second string */
+	    {
+	      format += 2;          /* advance two chars instead of just one */
+	      while (parm && *parm)
+		*cpy++ = *parm++;
+	    }
+	  else
+	    *cpy++ = *format++;
+	}
+      *cpy = '\0';
+      gdb_puts(buf);
+    }
+}
+ 
+static unsigned char *
+strcpy (unsigned char *dest, const unsigned char *src)
+{
+  unsigned char *ret = dest;
+
+  if (dest && src)
+    {
+      while (*src)
+	*dest++ = *src++;
+      *dest = 0;
+    }
+  return ret;
+}
+
+static int
+strlen (const unsigned char *src)
+{
+  int ret;
+
+  for (ret = 0; *src; src++)
+    ret++;
+
+  return ret;
+}
+
+#if 0
+void exit (code)
+     int code;
+{
+  _exit (code);
+}
+
+int atexit (void *p)
+{
+  return 0;
+}
+
+void abort (void)
+{
+  _exit (1);
+}
+#endif
diff --git a/gdb/m32r-tdep.c b/gdb/m32r-tdep.c
new file mode 100644
index 0000000..acd34fa
--- /dev/null
+++ b/gdb/m32r-tdep.c
@@ -0,0 +1,745 @@
+/* Target-dependent code for the Mitsubishi m32r for GDB, the GNU debugger.
+   Copyright 1996, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+#include "symfile.h"
+
+/* Function: m32r_use_struct_convention
+   Return nonzero if call_function should allocate stack space for a
+   struct return? */
+int
+m32r_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 8);
+}
+
+/* Function: frame_find_saved_regs
+   Return the frame_saved_regs structure for the frame.
+   Doesn't really work for dummy frames, but it does pass back
+   an empty frame_saved_regs, so I guess that's better than total failure */
+
+void 
+m32r_frame_find_saved_regs (fi, regaddr)
+     struct frame_info *fi;
+     struct frame_saved_regs *regaddr;
+{
+  memcpy(regaddr, &fi->fsr, sizeof(struct frame_saved_regs));
+}
+
+/* Turn this on if you want to see just how much instruction decoding
+   if being done, its quite a lot
+   */
+#if 0
+static void dump_insn(char * commnt,CORE_ADDR pc, int insn)
+{
+  printf_filtered("  %s %08x %08x ",
+		  commnt,(unsigned int)pc,(unsigned int) insn);
+  (*tm_print_insn)(pc,&tm_print_insn_info);
+  printf_filtered("\n");
+}
+#define insn_debug(args) { printf_filtered args; }
+#else
+#define dump_insn(a,b,c) {}
+#define insn_debug(args) {}
+#endif
+
+#define DEFAULT_SEARCH_LIMIT 44 
+
+/* Function: scan_prologue
+   This function decodes the target function prologue to determine
+   1) the size of the stack frame, and 2) which registers are saved on it.
+   It saves the offsets of saved regs in the frame_saved_regs argument,
+   and returns the frame size.  */
+
+/*
+  The sequence it currently generates is:
+  
+	if (varargs function) { ddi sp,#n }
+	push registers
+	if (additional stack <= 256) {	addi sp,#-stack	}
+	else if (additional stack < 65k) { add3 sp,sp,#-stack
+
+	} else if (additional stack) {
+	seth sp,#(stack & 0xffff0000)
+	or3 sp,sp,#(stack & 0x0000ffff)
+	sub sp,r4
+	}
+	if (frame pointer) {
+		mv sp,fp
+	}
+
+These instructions are scheduled like everything else, so you should stop at
+the first branch instruction.
+ 
+*/
+
+/* This is required by skip prologue and by m32r_init_extra_frame_info. 
+   The results of decoding a prologue should be cached because this
+   thrashing is getting nuts.
+   I am thinking of making a container class with two indexes, name and
+   address. It may be better to extend the symbol table.
+   */
+
+static void decode_prologue (start_pc, scan_limit, 
+			     pl_endptr, framelength, 
+			     fi, fsr)
+     CORE_ADDR start_pc;
+     CORE_ADDR scan_limit;
+     CORE_ADDR * pl_endptr;  /* var parameter */
+     unsigned long * framelength;
+     struct frame_info * fi;
+     struct frame_saved_regs * fsr;
+{
+  unsigned long framesize;
+  int insn;
+  int op1;
+  int maybe_one_more = 0;
+  CORE_ADDR after_prologue = 0;
+  CORE_ADDR after_stack_adjust = 0;
+  CORE_ADDR current_pc;
+
+
+  framesize = 0;
+  after_prologue = 0;
+  insn_debug(("rd prolog l(%d)\n",scan_limit - current_pc));
+
+  for (current_pc = start_pc; current_pc < scan_limit; current_pc += 2)
+    {
+
+      insn = read_memory_unsigned_integer (current_pc, 2);
+      dump_insn("insn-1",current_pc,insn);    /* MTZ */
+      
+       /* If this is a 32 bit instruction, we dont want to examine its
+	 immediate data as though it were an instruction */
+      if (current_pc & 0x02)
+	{ /* Clear the parallel execution bit from 16 bit instruction */
+	  if (maybe_one_more)
+	    { /* The last instruction was a branch, usually terminates
+		 the series, but if this is a parallel instruction,
+		 it may be a stack framing instruction */
+	      if (! (insn & 0x8000))
+		{ insn_debug(("Really done"));
+		  break; /* nope, we are really done */
+		}
+	    }
+	  insn &= 0x7fff;        /* decode this instruction further */
+	}
+      else
+	{
+	  if (maybe_one_more) 
+	    break; /* This isnt the one more */
+	  if (insn & 0x8000)
+	    {
+	      insn_debug(("32 bit insn\n"));
+	      if (current_pc == scan_limit)
+		scan_limit += 2; /* extend the search */
+	      current_pc += 2;   /* skip the immediate data */
+	      if (insn == 0x8faf)			/* add3 sp, sp, xxxx */
+		/* add 16 bit sign-extended offset */
+		{ insn_debug(("stack increment\n"));
+		framesize += -((short) read_memory_unsigned_integer (current_pc, 2));
+		}
+	      else
+		{
+		  if (((insn >> 8) == 0xe4) && /* ld24 r4, xxxxxx; sub sp, r4 */
+		      read_memory_unsigned_integer (current_pc + 2, 2) == 0x0f24)
+		    { /* subtract 24 bit sign-extended negative-offset */
+		      dump_insn("insn-2",current_pc+2,insn);
+		      insn = read_memory_unsigned_integer (current_pc - 2, 4);
+		      dump_insn("insn-3(l4)",current_pc -2,insn);
+		      if (insn & 0x00800000)	/* sign extend */
+			insn  |= 0xff000000;	/* negative */
+		      else
+			insn  &= 0x00ffffff;	/* positive */
+		      framesize += insn;
+		    }
+		}
+	      after_prologue = current_pc;
+	      continue;
+	    }
+	}
+      op1 = insn & 0xf000; /* isolate just the first nibble */
+      
+      if ((insn & 0xf0ff) == 0x207f)
+	{		/* st reg, @-sp */
+	  int regno;
+	  insn_debug(("push\n"));
+#if 0	/* No, PUSH FP is not an indication that we will use a frame pointer. */
+	  if (((insn & 0xffff) == 0x2d7f) && fi) 
+	    fi->using_frame_pointer = 1;
+#endif
+	  framesize  += 4;
+#if 0 
+/* Why should we increase the scan limit, just because we did a push? 
+   And if there is a reason, surely we would only want to do it if we
+   had already reached the scan limit... */
+	  if (current_pc == scan_limit)
+	    scan_limit += 2;
+#endif
+	  regno = ((insn >> 8) & 0xf);
+	  if (fsr)				/* save_regs offset */
+	    fsr->regs[regno] = framesize;
+	  after_prologue = 0;
+	    continue;
+	}
+      if ((insn >> 8) == 0x4f)  		/* addi sp, xx */
+	/* add 8 bit sign-extended offset */
+	{
+	  int stack_adjust = (char) (insn & 0xff);
+
+	  /* there are probably two of these stack adjustments:
+	     1) A negative one in the prologue, and
+	     2) A positive one in the epilogue.
+	     We are only interested in the first one.  */
+
+	  if (stack_adjust < 0)
+	    {
+	      framesize -= stack_adjust;
+	      after_prologue = 0;
+	      /* A frameless function may have no "mv fp, sp".
+		 In that case, this is the end of the prologue.  */
+	      after_stack_adjust = current_pc + 2;
+	    }
+	  continue;
+	}
+      if (insn == 0x1d8f) {	/* mv fp, sp */
+	if (fi) 
+	  fi->using_frame_pointer = 1;	/* fp is now valid */
+	insn_debug(("done fp found\n"));
+	after_prologue = current_pc + 2;
+	break;				/* end of stack adjustments */
+      }
+      if (insn ==  0x7000)  /* Nop looks like a branch, continue explicitly */
+	{ insn_debug(("nop\n"));
+	after_prologue = current_pc + 2;
+	continue; /* nop occurs between pushes */
+	}
+      /* End of prolog if any of these are branch instructions */
+      if ((op1 == 0x7000)
+	  || ( op1 == 0xb000)
+	  || (op1 == 0x7000))
+	{
+	  after_prologue = current_pc;
+	  insn_debug(("Done: branch\n"));
+	  maybe_one_more = 1;
+	  continue;
+	}
+      /* Some of the branch instructions are mixed with other types */
+      if (op1 == 0x1000)
+	{int subop = insn & 0x0ff0;
+	  if ((subop == 0x0ec0) || (subop == 0x0fc0))
+	    { insn_debug(("done: jmp\n"));
+	      after_prologue = current_pc;
+	      maybe_one_more = 1;
+	      continue; /* jmp , jl */
+	    }
+	}
+    }
+
+  if (current_pc >= scan_limit)
+    {
+      if (pl_endptr) 
+#if 1
+	if (after_stack_adjust != 0)
+	  /* We did not find a "mv fp,sp", but we DID find
+	     a stack_adjust.  Is it safe to use that as the
+	     end of the prologue?  I just don't know. */
+	  {
+	    *pl_endptr = after_stack_adjust;
+	    if (framelength)
+	      *framelength = framesize;
+	  }
+	else
+#endif
+      /* We reached the end of the loop without finding the end
+	 of the prologue.  No way to win -- we should report failure.  
+	 The way we do that is to return the original start_pc.
+	 GDB will set a breakpoint at the start of the function (etc.) */
+
+	*pl_endptr = start_pc;
+	
+      return;
+    }
+  if (after_prologue == 0) 
+    after_prologue = current_pc;
+
+  insn_debug((" framesize %d, firstline %08x\n",framesize,after_prologue));
+  if (framelength) 
+    *framelength = framesize;
+  if (pl_endptr) 
+    *pl_endptr = after_prologue;
+} /*  decode_prologue */
+
+/* Function: skip_prologue
+   Find end of function prologue */
+
+CORE_ADDR
+m32r_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR func_addr, func_end;
+  struct symtab_and_line sal;
+
+  /* See what the symbol table says */
+
+  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    {
+      sal = find_pc_line (func_addr, 0);
+
+      if (sal.line != 0 && sal.end <= func_end)
+	{
+	  
+	  insn_debug(("BP after prologue %08x\n",sal.end));
+	  func_end = sal.end;
+	}
+      else
+	/* Either there's no line info, or the line after the prologue is after
+	   the end of the function.  In this case, there probably isn't a
+	   prologue.  */
+	{
+	  insn_debug(("No line info, line(%x) sal_end(%x) funcend(%x)\n",
+		      sal.line,sal.end,func_end));
+	  func_end = min(func_end,func_addr + DEFAULT_SEARCH_LIMIT);
+	}
+    }
+  else 
+    func_end = pc + DEFAULT_SEARCH_LIMIT;
+  decode_prologue (pc, func_end, &sal.end, 0, 0, 0);
+  return sal.end;
+}
+
+static unsigned long
+m32r_scan_prologue (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR prologue_start, prologue_end, current_pc;
+  unsigned long framesize;
+
+  /* this code essentially duplicates skip_prologue, 
+     but we need the start address below.  */
+
+  if (find_pc_partial_function (fi->pc, NULL, &prologue_start, &prologue_end))
+    {
+      sal = find_pc_line (prologue_start, 0);
+
+      if (sal.line == 0)		/* no line info, use current PC */
+	if (prologue_start == entry_point_address ())
+	  return 0;
+    }
+  else
+    {
+      prologue_start = fi->pc;
+      prologue_end = prologue_start + 48; /* We're in the boondocks: 
+					      allow for 16 pushes, an add, 
+					      and "mv fp,sp" */
+    }
+#if 0
+  prologue_end = min (prologue_end, fi->pc);
+#endif
+  insn_debug(("fipc(%08x) start(%08x) end(%08x)\n",
+	      fi->pc,prologue_start,prologue_end));
+  prologue_end = min(prologue_end, prologue_start + DEFAULT_SEARCH_LIMIT);
+  decode_prologue (prologue_start,prologue_end,&prologue_end,&framesize,
+		   fi,fsr);
+  return framesize;
+}
+
+/* Function: init_extra_frame_info
+   This function actually figures out the frame address for a given pc and
+   sp.  This is tricky on the m32r because we sometimes don't use an explicit
+   frame pointer, and the previous stack pointer isn't necessarily recorded
+   on the stack.  The only reliable way to get this info is to
+   examine the prologue.  */
+
+void
+m32r_init_extra_frame_info (fi)
+     struct frame_info *fi;
+{
+  int reg;
+
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    {
+      /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+	 by assuming it's always FP.  */
+      fi->frame = generic_read_register_dummy (fi->pc, fi->frame, SP_REGNUM);
+      fi->framesize = 0;
+      return;
+    }
+  else 
+    {
+      fi->using_frame_pointer = 0;
+      fi->framesize = m32r_scan_prologue (fi, &fi->fsr);
+
+      if (!fi->next)
+	if (fi->using_frame_pointer)
+	  {
+	    fi->frame = read_register (FP_REGNUM);
+	  }
+	else
+	  fi->frame = read_register (SP_REGNUM);
+      else 	/* fi->next means this is not the innermost frame */
+	if (fi->using_frame_pointer)		    /* we have an FP */
+	  if (fi->next->fsr.regs[FP_REGNUM] != 0)   /* caller saved our FP */
+	    fi->frame = read_memory_integer (fi->next->fsr.regs[FP_REGNUM], 4);
+      for (reg = 0; reg < NUM_REGS; reg++)
+	if (fi->fsr.regs[reg] != 0)
+	  fi->fsr.regs[reg] = fi->frame + fi->framesize - fi->fsr.regs[reg];
+    }
+}
+
+/* Function: mn10300_virtual_frame_pointer
+   Return the register that the function uses for a frame pointer, 
+   plus any necessary offset to be applied to the register before
+   any frame pointer offsets.  */
+
+void
+m32r_virtual_frame_pointer (pc, reg, offset)
+     CORE_ADDR pc;
+     long *reg;
+     long *offset;
+{
+  struct frame_info fi;
+
+  /* Set up a dummy frame_info. */
+  fi.next = NULL;
+  fi.prev = NULL;
+  fi.frame = 0;
+  fi.pc = pc;
+
+  /* Analyze the prolog and fill in the extra info.  */
+  m32r_init_extra_frame_info (&fi);
+
+
+  /* Results will tell us which type of frame it uses.  */
+  if (fi.using_frame_pointer)
+    {
+      *reg    = FP_REGNUM;
+      *offset = 0;
+    }
+  else
+    {
+      *reg    = SP_REGNUM;
+      *offset = 0;
+    }
+}
+
+/* Function: find_callers_reg
+   Find REGNUM on the stack.  Otherwise, it's in an active register.  One thing
+   we might want to do here is to check REGNUM against the clobber mask, and
+   somehow flag it as invalid if it isn't saved on the stack somewhere.  This
+   would provide a graceful failure mode when trying to get the value of
+   caller-saves registers for an inner frame.  */
+
+CORE_ADDR
+m32r_find_callers_reg (fi, regnum)
+     struct frame_info *fi;
+     int regnum;
+{
+  for (; fi; fi = fi->next)
+    if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+    else if (fi->fsr.regs[regnum] != 0)
+      return read_memory_integer (fi->fsr.regs[regnum], 
+				  REGISTER_RAW_SIZE(regnum));
+  return read_register (regnum);
+}
+
+/* Function: frame_chain
+   Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+   For m32r, we save the frame size when we initialize the frame_info.  */
+
+CORE_ADDR
+m32r_frame_chain (fi)
+     struct frame_info *fi;
+{
+  CORE_ADDR fn_start, callers_pc, fp;
+
+  /* is this a dummy frame? */
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return fi->frame;	/* dummy frame same as caller's frame */
+
+  /* is caller-of-this a dummy frame? */
+  callers_pc = FRAME_SAVED_PC(fi);  /* find out who called us: */
+  fp = m32r_find_callers_reg (fi, FP_REGNUM);
+  if (PC_IN_CALL_DUMMY(callers_pc, fp, fp))	
+    return fp;		/* dummy frame's frame may bear no relation to ours */
+
+  if (find_pc_partial_function (fi->pc, 0, &fn_start, 0))
+    if (fn_start == entry_point_address ())
+      return 0;		/* in _start fn, don't chain further */
+  if (fi->framesize == 0)
+    {
+      printf_filtered("cannot determine frame size @ %08x , pc(%08x)\n",
+		      (unsigned long) fi->frame,
+		      (unsigned long) fi->pc );
+      return 0;
+    }
+  insn_debug(("m32rx frame %08x\n",fi->frame+fi->framesize));
+  return fi->frame + fi->framesize;
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Necessary for targets that don't actually execute a JSR/BSR instruction 
+   (ie. when using an empty CALL_DUMMY) */
+
+CORE_ADDR
+m32r_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  write_register (RP_REGNUM, CALL_DUMMY_ADDRESS ());
+  return sp;
+}
+
+
+/* Function: pop_frame
+   Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+struct frame_info *
+m32r_pop_frame (frame)
+     struct frame_info *frame;
+{
+  int regnum;
+
+  if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    {
+      for (regnum = 0; regnum < NUM_REGS; regnum++)
+	if (frame->fsr.regs[regnum] != 0)
+	  write_register (regnum, 
+			  read_memory_integer (frame->fsr.regs[regnum], 4));
+
+      write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+      write_register (SP_REGNUM, read_register (FP_REGNUM));
+      if (read_register (PSW_REGNUM) & 0x80)
+	write_register (SPU_REGNUM, read_register (SP_REGNUM));
+      else
+	write_register (SPI_REGNUM, read_register (SP_REGNUM));
+    }
+  flush_cached_frames ();
+  return NULL;
+}
+
+/* Function: frame_saved_pc
+   Find the caller of this frame.  We do this by seeing if RP_REGNUM is saved
+   in the stack anywhere, otherwise we get it from the registers. */
+
+CORE_ADDR
+m32r_frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM);
+  else
+    return m32r_find_callers_reg (fi, RP_REGNUM);
+}
+
+/* Function: push_arguments
+   Setup the function arguments for calling a function in the inferior.
+
+   On the Mitsubishi M32R architecture, there are four registers (R0 to R3)
+   which are dedicated for passing function arguments.  Up to the first 
+   four arguments (depending on size) may go into these registers.
+   The rest go on the stack.
+
+   Arguments that are smaller than 4 bytes will still take up a whole
+   register or a whole 32-bit word on the stack, and will be
+   right-justified in the register or the stack word.  This includes
+   chars, shorts, and small aggregate types.
+ 
+   Arguments of 8 bytes size are split between two registers, if 
+   available.  If only one register is available, the argument will 
+   be split between the register and the stack.  Otherwise it is
+   passed entirely on the stack.  Aggregate types with sizes between
+   4 and 8 bytes are passed entirely on the stack, and are left-justified
+   within the double-word (as opposed to aggregates smaller than 4 bytes
+   which are right-justified).
+
+   Aggregates of greater than 8 bytes are first copied onto the stack, 
+   and then a pointer to the copy is passed in the place of the normal
+   argument (either in a register if available, or on the stack).
+
+   Functions that must return an aggregate type can return it in the 
+   normal return value registers (R0 and R1) if its size is 8 bytes or
+   less.  For larger return values, the caller must allocate space for 
+   the callee to copy the return value to.  A pointer to this space is
+   passed as an implicit first argument, always in R0. */
+
+CORE_ADDR
+m32r_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int stack_offset, stack_alloc;
+  int argreg;
+  int argnum;
+  struct type *type;
+  CORE_ADDR regval;
+  char *val;
+  char valbuf[4];
+  int len;
+  int odd_sized_struct;
+
+  /* first force sp to a 4-byte alignment */
+  sp = sp & ~3;
+
+  argreg = ARG0_REGNUM;  
+  /* The "struct return pointer" pseudo-argument goes in R0 */
+  if (struct_return)
+      write_register (argreg++, struct_addr);
+ 
+  /* Now make sure there's space on the stack */
+  for (argnum = 0, stack_alloc = 0;
+       argnum < nargs; argnum++)
+    stack_alloc += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + 3) & ~3);
+  sp -= stack_alloc;    /* make room on stack for args */
+ 
+ 
+  /* Now load as many as possible of the first arguments into
+     registers, and push the rest onto the stack.  There are 16 bytes
+     in four registers available.  Loop thru args from first to last.  */
+ 
+  argreg = ARG0_REGNUM;
+  for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+    {
+      type = VALUE_TYPE (args[argnum]);
+      len  = TYPE_LENGTH (type);
+      memset(valbuf, 0, sizeof(valbuf));
+      if (len < 4)
+        { /* value gets right-justified in the register or stack word */
+          memcpy(valbuf + (4 - len),
+                 (char *) VALUE_CONTENTS (args[argnum]), len);
+          val = valbuf;
+        }
+      else
+        val = (char *) VALUE_CONTENTS (args[argnum]);
+ 
+      if (len > 4 && (len & 3) != 0)
+        odd_sized_struct = 1;           /* such structs go entirely on stack */
+      else
+        odd_sized_struct = 0;
+      while (len > 0)
+        {
+          if (argreg > ARGLAST_REGNUM || odd_sized_struct)
+            {				/* must go on the stack */
+              write_memory (sp + stack_offset, val, 4);
+              stack_offset += 4;
+            }
+          /* NOTE WELL!!!!!  This is not an "else if" clause!!!
+             That's because some *&^%$ things get passed on the stack
+             AND in the registers!   */
+          if (argreg <= ARGLAST_REGNUM)
+            {				/* there's room in a register */
+              regval = extract_address (val, REGISTER_RAW_SIZE(argreg));
+              write_register (argreg++, regval);
+            }
+          /* Store the value 4 bytes at a time.  This means that things
+             larger than 4 bytes may go partly in registers and partly
+             on the stack.  */
+          len -= REGISTER_RAW_SIZE(argreg);
+          val += REGISTER_RAW_SIZE(argreg);
+        }
+    }
+  return sp;
+}
+
+/* Function: fix_call_dummy 
+   If there is real CALL_DUMMY code (eg. on the stack), this function
+   has the responsability to insert the address of the actual code that
+   is the target of the target function call.  */
+
+void
+m32r_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
+     char *dummy;
+     CORE_ADDR pc;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  /* ld24 r8, <(imm24) fun> */
+  *(unsigned long *) (dummy) = (fun & 0x00ffffff) | 0xe8000000;
+}
+
+/* Function: get_saved_register
+   Just call the generic_get_saved_register function.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+
+/* Function: m32r_write_sp
+   Because SP is really a read-only register that mirrors either SPU or SPI,
+   we must actually write one of those two as well, depending on PSW. */
+
+void
+m32r_write_sp (val)
+     CORE_ADDR val;
+{
+  unsigned long psw = read_register (PSW_REGNUM);
+
+  if (psw & 0x80)	/* stack mode: user or interrupt */
+    write_register (SPU_REGNUM, val);
+  else
+    write_register (SPI_REGNUM, val);
+  write_register (SP_REGNUM, val);
+}
+
+void
+_initialize_m32r_tdep ()
+{
+  tm_print_insn = print_insn_m32r;
+}
+
diff --git a/gdb/m68k-stub.c b/gdb/m68k-stub.c
new file mode 100644
index 0000000..c2f1d3f
--- /dev/null
+++ b/gdb/m68k-stub.c
@@ -0,0 +1,1014 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED  
+   
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the 
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $                   
+ *
+ *  Module name: remcom.c $  
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *  
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $ 
+ *
+ *  NOTES:           See Below $
+ * 
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.  The breakpoint instruction
+ *  is hardwired to trap #1 because not to do so is a compatibility problem--
+ *  there either should be a standard breakpoint instruction, or the protocol
+ *  should be extended to provide some means to communicate which breakpoint
+ *  instruction is in use (or have the stub insert the breakpoint).
+ *  
+ *  Some explanation is probably necessary to explain how exceptions are
+ *  handled.  When an exception is encountered the 68000 pushes the current
+ *  program counter and status register onto the supervisor stack and then
+ *  transfers execution to a location specified in it's vector table.
+ *  The handlers for the exception vectors are hardwired to jmp to an address
+ *  given by the relation:  (exception - 256) * 6.  These are decending 
+ *  addresses starting from -6, -12, -18, ...  By allowing 6 bytes for
+ *  each entry, a jsr, jmp, bsr, ... can be used to enter the exception 
+ *  handler.  Using a jsr to handle an exception has an added benefit of
+ *  allowing a single handler to service several exceptions and use the
+ *  return address as the key differentiation.  The vector number can be
+ *  computed from the return address by [ exception = (addr + 1530) / 6 ].
+ *  The sole purpose of the routine _catchException is to compute the
+ *  exception number and push it on the stack in place of the return address.
+ *  The external function exceptionHandler() is
+ *  used to attach a specific handler to a specific m68k exception.
+ *  For 68020 machines, the ability to have a return address around just
+ *  so the vector can be determined is not necessary because the '020 pushes an
+ *  extra word onto the stack containing the vector offset
+ * 
+ *  Because gdb will sometimes write to the stack area to execute function
+ *  calls, this program cannot rely on using the supervisor stack so it
+ *  uses it's own stack area reserved in the int array remcomStack.  
+ * 
+ *************
+ *
+ *    The following gdb commands are supported:
+ * 
+ * command          function                               Return value
+ * 
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ * 
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ * 
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ * 
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ * 
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ * 
+ * All commands and responses are sent with a packet which includes a 
+ * checksum.  A packet consists of 
+ * 
+ * $<packet info>#<checksum>.
+ * 
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ * 
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ * 
+ * Example:
+ * 
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ * 
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include <setjmp.h>
+
+/************************************************************************
+ *
+ * external low-level support routines 
+ */
+typedef void (*ExceptionHook)(int);   /* pointer to function with int parm */
+typedef void (*Function)();           /* pointer to a function */
+
+extern void putDebugChar();	/* write a single character      */
+extern int getDebugChar();	/* read and return a single char */
+
+extern Function exceptionHandler();  /* assign an exception handler */
+extern ExceptionHook exceptionHook;  /* hook variable for errors/exceptions */
+
+/************************/
+/* FORWARD DECLARATIONS */
+/************************/
+static void
+initializeRemcomErrorFrame ();
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 400
+
+static char initialized;  /* boolean flag. != 0 means we've been initialized */
+
+int     remote_debug;
+/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */ 
+
+static const char hexchars[]="0123456789abcdef";
+
+/* there are 180 bytes of registers on a 68020 w/68881      */
+/* many of the fpa registers are 12 byte (96 bit) registers */
+#define NUMREGBYTES 180
+enum regnames {D0,D1,D2,D3,D4,D5,D6,D7, 
+               A0,A1,A2,A3,A4,A5,A6,A7, 
+               PS,PC,
+               FP0,FP1,FP2,FP3,FP4,FP5,FP6,FP7,
+               FPCONTROL,FPSTATUS,FPIADDR
+              };
+
+
+/* We keep a whole frame cache here.  "Why?", I hear you cry, "doesn't
+   GDB handle that sort of thing?"  Well, yes, I believe the only
+   reason for this cache is to save and restore floating point state
+   (fsave/frestore).  A cleaner way to do this would be to make the
+ fsave data part of the registers which GDB deals with like any
+   other registers.  This should not be a performance problem if the
+   ability to read individual registers is added to the protocol.  */
+
+typedef struct FrameStruct
+{
+    struct FrameStruct  *previous;
+    int       exceptionPC;      /* pc value when this frame created */
+    int       exceptionVector;  /* cpu vector causing exception     */
+    short     frameSize;        /* size of cpu frame in words       */
+    short     sr;               /* for 68000, this not always sr    */
+    int       pc;
+    short     format;
+    int       fsaveHeader;
+    int       morejunk[0];        /* exception frame, fp save... */
+} Frame;
+
+#define FRAMESIZE 500
+int   gdbFrameStack[FRAMESIZE];
+static Frame *lastFrame;
+
+/*
+ * these should not be static cuz they can be used outside this module
+ */
+int registers[NUMREGBYTES/4];
+int superStack;
+
+#define STACKSIZE 10000
+int remcomStack[STACKSIZE/sizeof(int)];
+static int* stackPtr = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+/*
+ * In many cases, the system will want to continue exception processing
+ * when a continue command is given.  
+ * oldExceptionHook is a function to invoke in this case.
+ */
+
+static ExceptionHook oldExceptionHook;
+
+#ifdef mc68020
+/* the size of the exception stack on the 68020 varies with the type of
+ * exception.  The following table is the number of WORDS used
+ * for each exception format.
+ */
+const short exceptionSize[] = { 4,4,6,4,4,4,4,4,29,10,16,46,12,4,4,4 };
+#endif
+
+#ifdef mc68332
+static const short exceptionSize[] = { 4,4,6,4,4,4,4,4,4,4,4,4,16,4,4,4 };
+#endif
+
+/************* jump buffer used for setjmp/longjmp **************************/
+jmp_buf remcomEnv;
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+#ifdef __HAVE_68881__
+/* do an fsave, then remember the address to begin a restore from */
+#define SAVE_FP_REGS()    asm(" fsave   a0@-");		\
+			  asm(" fmovemx fp0-fp7,_registers+72");        \
+			  asm(" fmoveml fpcr/fpsr/fpi,_registers+168"); 
+#define RESTORE_FP_REGS()                              \
+asm("                                                \n\
+    fmoveml  _registers+168,fpcr/fpsr/fpi            \n\
+    fmovemx  _registers+72,fp0-fp7                   \n\
+    cmpl     #-1,a0@     |  skip frestore flag set ? \n\
+    beq      skip_frestore                           \n\
+    frestore a0@+                                    \n\
+skip_frestore:                                       \n\
+");
+
+#else
+#define SAVE_FP_REGS()
+#define RESTORE_FP_REGS()
+#endif /* __HAVE_68881__ */
+
+void return_to_super();
+void return_to_user();
+
+asm("
+.text
+.globl _return_to_super
+_return_to_super:
+        movel   _registers+60,sp /* get new stack pointer */        
+        movel   _lastFrame,a0   /* get last frame info  */              
+        bra     return_to_any
+
+.globl _return_to_user
+_return_to_user:
+        movel   _registers+60,a0 /* get usp */                          
+        movel   a0,usp           /* set usp */				
+        movel   _superStack,sp  /* get original stack pointer */        
+
+return_to_any:
+        movel   _lastFrame,a0   /* get last frame info  */              
+        movel   a0@+,_lastFrame /* link in previous frame     */        
+        addql   #8,a0           /* skip over pc, vector#*/              
+        movew   a0@+,d0         /* get # of words in cpu frame */       
+        addw    d0,a0           /* point to end of data        */       
+        addw    d0,a0           /* point to end of data        */       
+        movel   a0,a1                                                   
+#                                                                       
+# copy the stack frame                                                  
+        subql   #1,d0                                                   
+copyUserLoop:                                                               
+        movew   a1@-,sp@-                                               
+        dbf     d0,copyUserLoop                                             
+");                                                                     
+        RESTORE_FP_REGS()                                              
+   asm("   moveml  _registers,d0-d7/a0-a6");			        
+   asm("   rte");  /* pop and go! */                                    
+
+#define DISABLE_INTERRUPTS()   asm("         oriw   #0x0700,sr");
+#define BREAKPOINT() asm("   trap #1");
+
+/* this function is called immediately when a level 7 interrupt occurs */
+/* if the previous interrupt level was 7 then we're already servicing  */
+/* this interrupt and an rte is in order to return to the debugger.    */
+/* For the 68000, the offset for sr is 6 due to the jsr return address */
+asm("
+.text
+.globl __debug_level7
+__debug_level7:
+	movew   d0,sp@-");
+#if defined (mc68020) || defined (mc68332)
+asm("	movew   sp@(2),d0");
+#else
+asm("	movew   sp@(6),d0");
+#endif
+asm("	andiw   #0x700,d0
+	cmpiw   #0x700,d0
+	beq     _already7
+        movew   sp@+,d0	
+        bra     __catchException
+_already7:
+	movew   sp@+,d0");
+#if !defined (mc68020) && !defined (mc68332)
+asm("	lea     sp@(4),sp");     /* pull off 68000 return address */
+#endif
+asm("	rte");
+
+extern void _catchException ();
+
+#if defined (mc68020) || defined (mc68332)
+/* This function is called when a 68020 exception occurs.  It saves
+ * all the cpu and fpcp regs in the _registers array, creates a frame on a
+ * linked list of frames which has the cpu and fpcp stack frames needed
+ * to properly restore the context of these processors, and invokes
+ * an exception handler (remcom_handler).
+ *
+ * stack on entry:                       stack on exit:
+ *   N bytes of junk                     exception # MSWord
+ *   Exception Format Word               exception # MSWord
+ *   Program counter LSWord              
+ *   Program counter MSWord             
+ *   Status Register                    
+ *                                       
+ *                                       
+ */
+asm(" 
+.text
+.globl __catchException
+__catchException:");
+DISABLE_INTERRUPTS();
+asm("
+        moveml  d0-d7/a0-a6,_registers /* save registers        */
+	movel	_lastFrame,a0	/* last frame pointer */
+");
+SAVE_FP_REGS();        
+asm("
+	lea     _registers,a5   /* get address of registers     */
+        movew   sp@,d1          /* get status register          */
+        movew   d1,a5@(66)      /* save sr		 	*/	
+	movel   sp@(2),a4       /* save pc in a4 for later use  */
+        movel   a4,a5@(68)      /* save pc in _regisers[]      	*/
+
+#
+# figure out how many bytes in the stack frame
+	movew   sp@(6),d0	/* get '020 exception format	*/
+        movew   d0,d2           /* make a copy of format word   */
+        andiw   #0xf000,d0      /* mask off format type         */
+        rolw    #5,d0           /* rotate into the low byte *2  */
+        lea     _exceptionSize,a1   
+        addw    d0,a1           /* index into the table         */
+	movew   a1@,d0          /* get number of words in frame */
+        movew   d0,d3           /* save it                      */
+        subw    d0,a0		/* adjust save pointer          */
+        subw    d0,a0		/* adjust save pointer(bytes)   */
+	movel   a0,a1           /* copy save pointer            */
+	subql   #1,d0           /* predecrement loop counter    */
+#
+# copy the frame
+saveFrameLoop:
+	movew  	sp@+,a1@+
+	dbf     d0,saveFrameLoop
+#
+# now that the stack has been clenaed,
+# save the a7 in use at time of exception
+        movel   sp,_superStack  /* save supervisor sp           */
+        andiw   #0x2000,d1      /* were we in supervisor mode ? */
+        beq     userMode       
+        movel   a7,a5@(60)      /* save a7                  */
+        bra     a7saveDone
+userMode:  
+	movel   usp,a1    	
+        movel   a1,a5@(60)      /* save user stack pointer	*/
+a7saveDone:
+
+#
+# save size of frame
+        movew   d3,a0@-
+
+#
+# compute exception number
+	andl    #0xfff,d2   	/* mask off vector offset	*/
+	lsrw    #2,d2   	/* divide by 4 to get vect num	*/
+        movel   d2,a0@-         /* save it                      */
+#
+# save pc causing exception
+        movel   a4,a0@-
+#
+# save old frame link and set the new value
+	movel	_lastFrame,a1	/* last frame pointer */
+	movel   a1,a0@-		/* save pointer to prev frame	*/
+        movel   a0,_lastFrame
+
+        movel   d2,sp@-		/* push exception num           */
+	movel   _exceptionHook,a0  /* get address of handler */
+        jbsr    a0@             /* and call it */
+        clrl    sp@             /* replace exception num parm with frame ptr */
+        jbsr     __returnFromException   /* jbsr, but never returns */
+");
+#else /* mc68000 */
+/* This function is called when an exception occurs.  It translates the
+ * return address found on the stack into an exception vector # which
+ * is then handled by either handle_exception or a system handler.
+ * _catchException provides a front end for both.  
+ *
+ * stack on entry:                       stack on exit:
+ *   Program counter MSWord              exception # MSWord 
+ *   Program counter LSWord              exception # MSWord
+ *   Status Register                     
+ *   Return Address  MSWord              
+ *   Return Address  LSWord             
+ */
+asm("
+.text
+.globl __catchException
+__catchException:");
+DISABLE_INTERRUPTS();
+asm("
+        moveml d0-d7/a0-a6,_registers  /* save registers               */
+	movel	_lastFrame,a0	/* last frame pointer */
+");
+SAVE_FP_REGS();        
+asm("
+        lea     _registers,a5   /* get address of registers     */
+        movel   sp@+,d2         /* pop return address           */
+	addl 	#1530,d2        /* convert return addr to 	*/
+	divs 	#6,d2   	/*  exception number		*/
+	extl    d2   
+
+        moveql  #3,d3           /* assume a three word frame     */
+
+        cmpiw   #3,d2           /* bus error or address error ? */
+        bgt     normal          /* if >3 then normal error      */
+        movel   sp@+,a0@-       /* copy error info to frame buff*/
+        movel   sp@+,a0@-       /* these are never used         */
+        moveql  #7,d3           /* this is a 7 word frame       */
+     
+normal:   
+	movew   sp@+,d1         /* pop status register          */
+        movel   sp@+,a4         /* pop program counter          */
+        movew   d1,a5@(66)      /* save sr		 	*/	
+        movel   a4,a5@(68)      /* save pc in _regisers[]      	*/
+        movel   a4,a0@-         /* copy pc to frame buffer      */
+	movew   d1,a0@-         /* copy sr to frame buffer      */
+
+        movel   sp,_superStack  /* save supervisor sp          */
+
+        andiw   #0x2000,d1      /* were we in supervisor mode ? */
+        beq     userMode       
+        movel   a7,a5@(60)      /* save a7                  */
+        bra     saveDone             
+userMode:
+        movel   usp,a1    	/* save user stack pointer 	*/
+        movel   a1,a5@(60)      /* save user stack pointer	*/
+saveDone:
+
+        movew   d3,a0@-         /* push frame size in words     */
+        movel   d2,a0@-         /* push vector number           */
+        movel   a4,a0@-         /* push exception pc            */
+
+#
+# save old frame link and set the new value
+	movel	_lastFrame,a1	/* last frame pointer */
+	movel   a1,a0@-		/* save pointer to prev frame	*/
+        movel   a0,_lastFrame
+
+        movel   d2,sp@-		/* push exception num           */
+	movel   _exceptionHook,a0  /* get address of handler */
+        jbsr    a0@             /* and call it */
+        clrl    sp@             /* replace exception num parm with frame ptr */
+        jbsr     __returnFromException   /* jbsr, but never returns */
+");
+#endif
+
+
+/*
+ * remcomHandler is a front end for handle_exception.  It moves the
+ * stack pointer into an area reserved for debugger use in case the
+ * breakpoint happened in supervisor mode.
+ */
+asm("_remcomHandler:");
+asm("           addl    #4,sp");        /* pop off return address     */
+asm("           movel   sp@+,d0");      /* get the exception number   */
+asm("		movel   _stackPtr,sp"); /* move to remcom stack area  */
+asm("		movel   d0,sp@-");	/* push exception onto stack  */
+asm("		jbsr    _handle_exception");    /* this never returns */
+asm("           rts");                  /* return */
+
+void _returnFromException( Frame *frame )
+{
+    /* if no passed in frame, use the last one */
+    if (! frame)
+    {
+        frame = lastFrame;
+	frame->frameSize = 4;
+        frame->format = 0;
+        frame->fsaveHeader = -1; /* restore regs, but we dont have fsave info*/
+    }
+
+#if !defined (mc68020) && !defined (mc68332)
+    /* a 68000 cannot use the internal info pushed onto a bus error
+     * or address error frame when doing an RTE so don't put this info
+     * onto the stack or the stack will creep every time this happens.
+     */
+    frame->frameSize=3;
+#endif
+
+    /* throw away any frames in the list after this frame */
+    lastFrame = frame;
+
+    frame->sr = registers[(int) PS];
+    frame->pc = registers[(int) PC];
+
+    if (registers[(int) PS] & 0x2000)
+    { 
+        /* return to supervisor mode... */
+        return_to_super();
+    }
+    else
+    { /* return to user mode */
+        return_to_user();
+    }
+}
+
+int hex(ch)
+char ch;
+{
+  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
+  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
+  if ((ch >= 'A') && (ch <= 'F')) return (ch-'A'+10);
+  return (-1);
+}
+
+
+/* scan for the sequence $<data>#<checksum>     */
+void getpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int  i;
+  int  count;
+  char ch;
+  
+  do {
+    /* wait around for the start character, ignore all other characters */
+    while ((ch = (getDebugChar() & 0x7f)) != '$'); 
+    checksum = 0;
+    xmitcsum = -1;
+    
+    count = 0;
+    
+    /* now, read until a # or end of buffer is found */
+    while (count < BUFMAX) {
+      ch = getDebugChar() & 0x7f;
+      if (ch == '#') break;
+      checksum = checksum + ch;
+      buffer[count] = ch;
+      count = count + 1;
+      }
+    buffer[count] = 0;
+
+    if (ch == '#') {
+      xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+      xmitcsum += hex(getDebugChar() & 0x7f);
+      if ((remote_debug ) && (checksum != xmitcsum)) {
+        fprintf (stderr,"bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
+						     checksum,xmitcsum,buffer);
+      }
+      
+      if (checksum != xmitcsum) putDebugChar('-');  /* failed checksum */ 
+      else {
+	 putDebugChar('+');  /* successful transfer */
+	 /* if a sequence char is present, reply the sequence ID */
+	 if (buffer[2] == ':') {
+	    putDebugChar( buffer[0] );
+	    putDebugChar( buffer[1] );
+	    /* remove sequence chars from buffer */
+	    count = strlen(buffer);
+	    for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
+	 } 
+      } 
+    } 
+  } while (checksum != xmitcsum);
+  
+}
+
+/* send the packet in buffer.  The host get's one chance to read it.  
+   This routine does not wait for a positive acknowledge.  */
+
+
+void putpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  int  count;
+  char ch;
+  
+  /*  $<packet info>#<checksum>. */
+  do {
+  putDebugChar('$');
+  checksum = 0;
+  count    = 0;
+  
+  while (ch=buffer[count]) {
+    putDebugChar(ch);
+    checksum += ch;
+    count += 1;
+  }
+  
+  putDebugChar('#');
+  putDebugChar(hexchars[checksum >> 4]);
+  putDebugChar(hexchars[checksum % 16]);
+
+  } while (1 == 0);  /* (getDebugChar() != '+'); */
+  
+}
+
+char  remcomInBuffer[BUFMAX];
+char  remcomOutBuffer[BUFMAX];
+static short error;
+
+
+void debug_error(format, parm)
+char * format;
+char * parm;
+{
+  if (remote_debug) fprintf (stderr,format,parm);
+}
+
+/* convert the memory pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+char* mem2hex(mem, buf, count)
+char* mem;
+char* buf;
+int   count;
+{
+      int i;
+      unsigned char ch;
+      for (i=0;i<count;i++) {
+          ch = *mem++;
+          *buf++ = hexchars[ch >> 4];
+          *buf++ = hexchars[ch % 16];
+      }
+      *buf = 0; 
+      return(buf);
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem */
+/* return a pointer to the character AFTER the last byte written */
+char* hex2mem(buf, mem, count)
+char* buf;
+char* mem;
+int   count;
+{
+      int i;
+      unsigned char ch;
+      for (i=0;i<count;i++) {
+          ch = hex(*buf++) << 4;
+          ch = ch + hex(*buf++);
+          *mem++ = ch;
+      }
+      return(mem);
+}
+
+/* a bus error has occurred, perform a longjmp
+   to return execution and allow handling of the error */
+
+void handle_buserror()
+{
+  longjmp(remcomEnv,1);
+}
+
+/* this function takes the 68000 exception number and attempts to 
+   translate this number into a unix compatible signal value */
+int computeSignal( exceptionVector )
+int exceptionVector;
+{
+  int sigval;
+  switch (exceptionVector) {
+    case 2 : sigval = 10; break; /* bus error           */
+    case 3 : sigval = 10; break; /* address error       */
+    case 4 : sigval = 4;  break; /* illegal instruction */
+    case 5 : sigval = 8;  break; /* zero divide         */
+    case 6 : sigval = 8; break; /* chk instruction     */
+    case 7 : sigval = 8; break; /* trapv instruction   */
+    case 8 : sigval = 11; break; /* privilege violation */
+    case 9 : sigval = 5;  break; /* trace trap          */
+    case 10: sigval = 4;  break; /* line 1010 emulator  */
+    case 11: sigval = 4;  break; /* line 1111 emulator  */
+
+      /* Coprocessor protocol violation.  Using a standard MMU or FPU
+	 this cannot be triggered by software.  Call it a SIGBUS.  */
+    case 13: sigval = 10;  break;
+
+    case 31: sigval = 2;  break; /* interrupt           */
+    case 33: sigval = 5;  break; /* breakpoint          */
+
+      /* This is a trap #8 instruction.  Apparently it is someone's software
+	 convention for some sort of SIGFPE condition.  Whose?  How many
+	 people are being screwed by having this code the way it is?
+	 Is there a clean solution?  */
+    case 40: sigval = 8;  break; /* floating point err  */
+
+    case 48: sigval = 8;  break; /* floating point err  */
+    case 49: sigval = 8;  break; /* floating point err  */
+    case 50: sigval = 8;  break; /* zero divide         */
+    case 51: sigval = 8;  break; /* underflow           */
+    case 52: sigval = 8;  break; /* operand error       */
+    case 53: sigval = 8;  break; /* overflow            */
+    case 54: sigval = 8;  break; /* NAN                 */
+    default: 
+      sigval = 7;         /* "software generated"*/
+  }
+  return (sigval);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+int hexToInt(char **ptr, int *intValue)
+{
+    int numChars = 0;
+    int hexValue;
+    
+    *intValue = 0;
+
+    while (**ptr)
+    {
+        hexValue = hex(**ptr);
+        if (hexValue >=0)
+        {
+            *intValue = (*intValue <<4) | hexValue;
+            numChars ++;
+        }
+        else
+            break;
+        
+        (*ptr)++;
+    }
+
+    return (numChars);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ */
+void handle_exception(int exceptionVector)
+{
+  int    sigval;
+  int    addr, length;
+  char * ptr;
+  int    newPC;
+  Frame  *frame;
+  
+  if (remote_debug) printf("vector=%d, sr=0x%x, pc=0x%x\n", 
+			    exceptionVector,
+			    registers[ PS ], 
+			    registers[ PC ]);
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal( exceptionVector );
+  remcomOutBuffer[0] = 'S';
+  remcomOutBuffer[1] =  hexchars[sigval >> 4];
+  remcomOutBuffer[2] =  hexchars[sigval % 16];
+  remcomOutBuffer[3] = 0;
+
+  putpacket(remcomOutBuffer); 
+
+  while (1==1) { 
+    error = 0;
+    remcomOutBuffer[0] = 0;
+    getpacket(remcomInBuffer);
+    switch (remcomInBuffer[0]) {
+      case '?' :   remcomOutBuffer[0] = 'S';
+                   remcomOutBuffer[1] =  hexchars[sigval >> 4];
+                   remcomOutBuffer[2] =  hexchars[sigval % 16];
+                   remcomOutBuffer[3] = 0;
+                 break; 
+      case 'd' : remote_debug = !(remote_debug);  /* toggle debug flag */
+                 break; 
+      case 'g' : /* return the value of the CPU registers */
+                mem2hex((char*) registers, remcomOutBuffer, NUMREGBYTES);
+                break;
+      case 'G' : /* set the value of the CPU registers - return OK */
+                hex2mem(&remcomInBuffer[1], (char*) registers, NUMREGBYTES);
+                strcpy(remcomOutBuffer,"OK");
+                break;
+      
+      /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+      case 'm' : 
+	        if (setjmp(remcomEnv) == 0)
+                {
+                    exceptionHandler(2,handle_buserror); 
+
+		    /* TRY TO READ %x,%x.  IF SUCCEED, SET PTR = 0 */
+                    ptr = &remcomInBuffer[1];
+                    if (hexToInt(&ptr,&addr))
+                        if (*(ptr++) == ',')
+                            if (hexToInt(&ptr,&length)) 
+                            {
+                                ptr = 0;
+                                mem2hex((char*) addr, remcomOutBuffer, length);
+                            }
+
+                    if (ptr)
+                    {
+		      strcpy(remcomOutBuffer,"E01");
+		      debug_error("malformed read memory command: %s",remcomInBuffer);
+                  }     
+                } 
+		else {
+		  exceptionHandler(2,_catchException);   
+		  strcpy(remcomOutBuffer,"E03");
+		  debug_error("bus error");
+		  }     
+                
+		/* restore handler for bus error */
+		exceptionHandler(2,_catchException);   
+		break;
+      
+      /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+      case 'M' : 
+	        if (setjmp(remcomEnv) == 0) {
+		    exceptionHandler(2,handle_buserror); 
+                    
+		    /* TRY TO READ '%x,%x:'.  IF SUCCEED, SET PTR = 0 */
+                    ptr = &remcomInBuffer[1];
+                    if (hexToInt(&ptr,&addr))
+                        if (*(ptr++) == ',')
+                            if (hexToInt(&ptr,&length))
+                                if (*(ptr++) == ':')
+                                {
+                                    hex2mem(ptr, (char*) addr, length);
+                                    ptr = 0;
+                                    strcpy(remcomOutBuffer,"OK");
+                                }
+                    if (ptr)
+                    {
+		      strcpy(remcomOutBuffer,"E02");
+		      debug_error("malformed write memory command: %s",remcomInBuffer);
+		      }     
+                } 
+		else {
+		  exceptionHandler(2,_catchException);   
+		  strcpy(remcomOutBuffer,"E03");
+		  debug_error("bus error");
+		  }     
+
+                /* restore handler for bus error */
+                exceptionHandler(2,_catchException);   
+                break;
+     
+     /* cAA..AA    Continue at address AA..AA(optional) */
+     /* sAA..AA   Step one instruction from AA..AA(optional) */
+     case 'c' : 
+     case 's' : 
+          /* try to read optional parameter, pc unchanged if no parm */
+         ptr = &remcomInBuffer[1];
+         if (hexToInt(&ptr,&addr))
+             registers[ PC ] = addr;
+             
+          newPC = registers[ PC];
+          
+          /* clear the trace bit */
+          registers[ PS ] &= 0x7fff;
+          
+          /* set the trace bit if we're stepping */
+          if (remcomInBuffer[0] == 's') registers[ PS ] |= 0x8000;
+          
+          /*
+           * look for newPC in the linked list of exception frames.
+           * if it is found, use the old frame it.  otherwise,
+           * fake up a dummy frame in returnFromException().
+           */
+          if (remote_debug) printf("new pc = 0x%x\n",newPC);
+          frame = lastFrame;
+          while (frame)
+          {
+              if (remote_debug)
+                  printf("frame at 0x%x has pc=0x%x, except#=%d\n",
+                         frame,frame->exceptionPC,
+                         frame->exceptionVector);
+              if (frame->exceptionPC == newPC) break;  /* bingo! a match */
+              /*
+               * for a breakpoint instruction, the saved pc may
+               * be off by two due to re-executing the instruction
+               * replaced by the trap instruction.  Check for this.
+               */
+              if ((frame->exceptionVector == 33) &&
+                  (frame->exceptionPC == (newPC+2))) break;
+              if (frame == frame->previous)
+	      {
+	          frame = 0; /* no match found */ 
+	          break; 
+	      }
+	      frame = frame->previous;
+          }
+          
+          /*
+           * If we found a match for the PC AND we are not returning
+           * as a result of a breakpoint (33),
+           * trace exception (9), nmi (31), jmp to
+           * the old exception handler as if this code never ran.
+           */
+          if (frame) 
+          {
+              if ((frame->exceptionVector != 9)  && 
+                  (frame->exceptionVector != 31) && 
+                  (frame->exceptionVector != 33))
+              { 
+                  /*
+                   * invoke the previous handler.
+                   */
+                  if (oldExceptionHook)
+                      (*oldExceptionHook) (frame->exceptionVector);
+                  newPC = registers[ PC ];    /* pc may have changed  */
+                  if (newPC != frame->exceptionPC)
+                  {
+                      if (remote_debug)
+                          printf("frame at 0x%x has pc=0x%x, except#=%d\n",
+                                 frame,frame->exceptionPC,
+                                 frame->exceptionVector);
+                      /* re-use the last frame, we're skipping it (longjump?)*/
+		      frame = (Frame *) 0;
+	              _returnFromException( frame );  /* this is a jump */
+                  }
+              }
+          }         
+
+    	  /* if we couldn't find a frame, create one */
+          if (frame == 0)
+	  {
+    	      frame = lastFrame -1 ;
+	      
+	      /* by using a bunch of print commands with breakpoints,
+    	         it's possible for the frame stack to creep down.  If it creeps
+		 too far, give up and reset it to the top.  Normal use should
+    	         not see this happen.
+    	      */
+	      if ((unsigned int) (frame-2) < (unsigned int) &gdbFrameStack)
+    	      {
+    	         initializeRemcomErrorFrame();
+    	         frame = lastFrame; 
+	      }
+    	      frame->previous = lastFrame;
+              lastFrame = frame;
+              frame = 0;  /* null so _return... will properly initialize it */ 
+	  }    
+	  
+	  _returnFromException( frame ); /* this is a jump */
+
+          break;
+          
+      /* kill the program */
+      case 'k' :  /* do nothing */
+                break;
+      } /* switch */ 
+    
+    /* reply to the request */
+    putpacket(remcomOutBuffer); 
+    }
+}
+
+
+void
+initializeRemcomErrorFrame()
+{
+    lastFrame = ((Frame *) &gdbFrameStack[FRAMESIZE-1]) - 1;
+    lastFrame->previous = lastFrame;
+}
+
+/* this function is used to set up exception handlers for tracing and 
+   breakpoints */
+void set_debug_traps()
+{
+  extern void _debug_level7();
+  extern void remcomHandler();
+  int exception;
+
+  initializeRemcomErrorFrame();
+  stackPtr  = &remcomStack[STACKSIZE/sizeof(int) - 1];
+
+  for (exception = 2; exception <= 23; exception++)
+      exceptionHandler(exception,_catchException);   
+
+  /* level 7 interrupt              */
+  exceptionHandler(31,_debug_level7);    
+  
+  /* breakpoint exception (trap #1) */
+  exceptionHandler(33,_catchException);
+  
+  /* This is a trap #8 instruction.  Apparently it is someone's software
+     convention for some sort of SIGFPE condition.  Whose?  How many
+     people are being screwed by having this code the way it is?
+     Is there a clean solution?  */
+  exceptionHandler(40,_catchException);
+  
+  /* 48 to 54 are floating point coprocessor errors */
+  for (exception = 48; exception <= 54; exception++)
+      exceptionHandler(exception,_catchException);   
+
+  if (oldExceptionHook != remcomHandler)
+  {
+      oldExceptionHook = exceptionHook;
+      exceptionHook    = remcomHandler;
+  }
+  
+  initialized = 1;
+
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+   
+void breakpoint()
+{
+  if (initialized) BREAKPOINT();
+}
+
diff --git a/gdb/m68k-tdep.c b/gdb/m68k-tdep.c
new file mode 100644
index 0000000..d597efa
--- /dev/null
+++ b/gdb/m68k-tdep.c
@@ -0,0 +1,516 @@
+/* Target dependent code for the Motorola 68000 series.
+   Copyright (C) 1990, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "symtab.h"
+#include "gdbcore.h"
+#include "value.h"
+#include "gdb_string.h"
+
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+void
+m68k_push_dummy_frame ()
+{
+  register CORE_ADDR sp = read_register (SP_REGNUM);
+  register int regnum;
+  char raw_buffer[12];
+
+  sp = push_word (sp, read_register (PC_REGNUM));
+  sp = push_word (sp, read_register (FP_REGNUM));
+  write_register (FP_REGNUM, sp);
+
+  /* Always save the floating-point registers, whether they exist on
+     this target or not.  */
+  for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--)
+    {
+      read_register_bytes (REGISTER_BYTE (regnum), raw_buffer, 12);
+      sp = push_bytes (sp, raw_buffer, 12);
+    }
+
+  for (regnum = FP_REGNUM - 1; regnum >= 0; regnum--)
+    {
+      sp = push_word (sp, read_register (regnum));
+    }
+  sp = push_word (sp, read_register (PS_REGNUM));
+  write_register (SP_REGNUM, sp);
+}
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+void
+m68k_pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR fp;
+  register int regnum;
+  struct frame_saved_regs fsr;
+  char raw_buffer[12];
+
+  fp = FRAME_FP (frame);
+  get_frame_saved_regs (frame, &fsr);
+  for (regnum = FP0_REGNUM + 7 ; regnum >= FP0_REGNUM ; regnum--)
+    {
+      if (fsr.regs[regnum])
+	{
+	  read_memory (fsr.regs[regnum], raw_buffer, 12);
+	  write_register_bytes (REGISTER_BYTE (regnum), raw_buffer, 12);
+	}
+    }
+  for (regnum = FP_REGNUM - 1 ; regnum >= 0 ; regnum--)
+    {
+      if (fsr.regs[regnum])
+	{
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum], 4));
+	}
+    }
+  if (fsr.regs[PS_REGNUM])
+    {
+      write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4));
+    }
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
+  write_register (SP_REGNUM, fp + 8);
+  flush_cached_frames ();
+}
+
+
+/* Given an ip value corresponding to the start of a function,
+   return the ip of the first instruction after the function 
+   prologue.  This is the generic m68k support.  Machines which
+   require something different can override the SKIP_PROLOGUE
+   macro to point elsewhere.
+
+   Some instructions which typically may appear in a function
+   prologue include:
+
+   A link instruction, word form:
+
+	link.w	%a6,&0			4e56  XXXX
+
+   A link instruction, long form:
+
+	link.l  %fp,&F%1		480e  XXXX  XXXX
+
+   A movm instruction to preserve integer regs:
+
+	movm.l  &M%1,(4,%sp)		48ef  XXXX  XXXX
+
+   A fmovm instruction to preserve float regs:
+
+	fmovm   &FPM%1,(FPO%1,%sp)	f237  XXXX  XXXX  XXXX  XXXX
+
+   Some profiling setup code (FIXME, not recognized yet):
+
+	lea.l   (.L3,%pc),%a1		43fb  XXXX  XXXX  XXXX
+	bsr     _mcount			61ff  XXXX  XXXX
+
+  */
+
+#define P_LINK_L	0x480e
+#define P_LINK_W	0x4e56
+#define P_MOV_L		0x207c
+#define P_JSR		0x4eb9
+#define P_BSR		0x61ff
+#define P_LEA_L		0x43fb
+#define P_MOVM_L	0x48ef
+#define P_FMOVM		0xf237
+#define P_TRAP		0x4e40
+
+CORE_ADDR
+m68k_skip_prologue (ip)
+CORE_ADDR ip;
+{
+  register CORE_ADDR limit;
+  struct symtab_and_line sal;
+  register int op;
+
+  /* Find out if there is a known limit for the extent of the prologue.
+     If so, ensure we don't go past it.  If not, assume "infinity". */
+
+  sal = find_pc_line (ip, 0);
+  limit = (sal.end) ? sal.end : (CORE_ADDR) ~0;
+
+  while (ip < limit)
+    {
+      op = read_memory_integer (ip, 2);
+      op &= 0xFFFF;
+      
+      if (op == P_LINK_W)
+	{
+	  ip += 4;	/* Skip link.w */
+	}
+      else if (op == 0x4856)
+	ip += 2; /* Skip pea %fp */
+      else if (op == 0x2c4f)
+	ip += 2; /* Skip move.l %sp, %fp */
+      else if (op == P_LINK_L)
+	{
+	  ip += 6;	/* Skip link.l */
+	}
+      else if (op == P_MOVM_L)
+	{
+	  ip += 6;	/* Skip movm.l */
+	}
+      else if (op == P_FMOVM)
+	{
+	  ip += 10;	/* Skip fmovm */
+	}
+      else
+	{
+	  break;	/* Found unknown code, bail out. */
+	}
+    }
+  return (ip);
+}
+
+void
+m68k_find_saved_regs (frame_info, saved_regs)
+     struct frame_info *frame_info;
+     struct frame_saved_regs *saved_regs;
+{
+  register int regnum;							
+  register int regmask;							
+  register CORE_ADDR next_addr;						
+  register CORE_ADDR pc;
+
+  /* First possible address for a pc in a call dummy for this frame.  */
+  CORE_ADDR possible_call_dummy_start =
+    (frame_info)->frame - CALL_DUMMY_LENGTH - FP_REGNUM*4 - 4 - 8*12;
+
+  int nextinsn;
+  memset (saved_regs, 0, sizeof (*saved_regs));
+  if ((frame_info)->pc >= possible_call_dummy_start
+      && (frame_info)->pc <= (frame_info)->frame)
+    {
+
+      /* It is a call dummy.  We could just stop now, since we know
+	 what the call dummy saves and where.  But this code proceeds
+	 to parse the "prologue" which is part of the call dummy.
+	 This is needlessly complex and confusing.  FIXME.  */
+
+      next_addr = (frame_info)->frame;
+      pc = possible_call_dummy_start;
+    }
+  else   								
+    {
+      pc = get_pc_function_start ((frame_info)->pc); 			
+
+      if (0x4856 == read_memory_integer (pc, 2)
+	  && 0x2c4f == read_memory_integer (pc + 2, 2))
+	{
+	  /*
+	    pea %fp
+            move.l %sp, %fp */
+
+	  pc += 4;
+	  next_addr = frame_info->frame;
+	}
+      else if (044016 == read_memory_integer (pc, 2))
+	/* link.l %fp */
+	/* Find the address above the saved   
+	   regs using the amount of storage from the link instruction.  */
+	next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 4), pc+=4; 
+      else if (047126 == read_memory_integer (pc, 2))			
+	/* link.w %fp */
+	/* Find the address above the saved   
+	   regs using the amount of storage from the link instruction.  */
+	next_addr = (frame_info)->frame + read_memory_integer (pc += 2, 2), pc+=2; 
+      else goto lose;
+
+      /* If have an addal #-n, sp next, adjust next_addr.  */		
+      if ((0177777 & read_memory_integer (pc, 2)) == 0157774)		
+	next_addr += read_memory_integer (pc += 2, 4), pc += 4;		
+    }									
+  regmask = read_memory_integer (pc + 2, 2);				
+
+  /* Here can come an fmovem.  Check for it.  */		
+  nextinsn = 0xffff & read_memory_integer (pc, 2);			
+  if (0xf227 == nextinsn						
+      && (regmask & 0xff00) == 0xe000)					
+    { pc += 4; /* Regmask's low bit is for register fp7, the first pushed */ 
+      for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1)		
+	if (regmask & 1)						
+          saved_regs->regs[regnum] = (next_addr -= 12);		
+      regmask = read_memory_integer (pc + 2, 2); }
+
+  /* next should be a moveml to (sp) or -(sp) or a movl r,-(sp) */	
+  if (0044327 == read_memory_integer (pc, 2))				
+    { pc += 4; /* Regmask's low bit is for register 0, the first written */ 
+      for (regnum = 0; regnum < 16; regnum++, regmask >>= 1)		
+	if (regmask & 1)						
+          saved_regs->regs[regnum] = (next_addr += 4) - 4; }	
+  else if (0044347 == read_memory_integer (pc, 2))			
+    {
+      pc += 4; /* Regmask's low bit is for register 15, the first pushed */ 
+      for (regnum = 15; regnum >= 0; regnum--, regmask >>= 1)		
+	if (regmask & 1)						
+          saved_regs->regs[regnum] = (next_addr -= 4);
+    }
+  else if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2)))		
+    {
+      regnum = 0xf & read_memory_integer (pc, 2); pc += 2;		
+      saved_regs->regs[regnum] = (next_addr -= 4);
+      /* gcc, at least, may use a pair of movel instructions when saving
+	 exactly 2 registers.  */
+      if (0x2f00 == (0xfff0 & read_memory_integer (pc, 2)))
+	{
+	  regnum = 0xf & read_memory_integer (pc, 2);
+	  pc += 2;
+	  saved_regs->regs[regnum] = (next_addr -= 4);
+	}
+    }
+
+  /* fmovemx to index of sp may follow.  */				
+  regmask = read_memory_integer (pc + 2, 2);				
+  nextinsn = 0xffff & read_memory_integer (pc, 2);			
+  if (0xf236 == nextinsn						
+      && (regmask & 0xff00) == 0xf000)					
+    { pc += 10; /* Regmask's low bit is for register fp0, the first written */ 
+      for (regnum = FP0_REGNUM + 7; regnum >= FP0_REGNUM; regnum--, regmask >>= 1)		
+	if (regmask & 1)						
+          saved_regs->regs[regnum] = (next_addr += 12) - 12;	
+      regmask = read_memory_integer (pc + 2, 2); }			
+
+  /* clrw -(sp); movw ccr,-(sp) may follow.  */				
+  if (0x426742e7 == read_memory_integer (pc, 4))			
+    saved_regs->regs[PS_REGNUM] = (next_addr -= 4);		
+  lose: ;								
+  saved_regs->regs[SP_REGNUM] = (frame_info)->frame + 8;		
+  saved_regs->regs[FP_REGNUM] = (frame_info)->frame;		
+  saved_regs->regs[PC_REGNUM] = (frame_info)->frame + 4;		
+#ifdef SIG_SP_FP_OFFSET
+  /* Adjust saved SP_REGNUM for fake _sigtramp frames.  */
+  if (frame_info->signal_handler_caller && frame_info->next)
+    saved_regs->regs[SP_REGNUM] = frame_info->next->frame + SIG_SP_FP_OFFSET;
+#endif
+}
+
+
+#ifdef USE_PROC_FS	/* Target dependent support for /proc */
+
+#include <sys/procfs.h>
+
+/*  The /proc interface divides the target machine's register set up into
+    two different sets, the general register set (gregset) and the floating
+    point register set (fpregset).  For each set, there is an ioctl to get
+    the current register set and another ioctl to set the current values.
+
+    The actual structure passed through the ioctl interface is, of course,
+    naturally machine dependent, and is different for each set of registers.
+    For the m68k for example, the general register set is typically defined
+    by:
+
+	typedef int gregset_t[18];
+
+	#define	R_D0	0
+	...
+	#define	R_PS	17
+
+    and the floating point set by:
+
+    	typedef	struct fpregset {
+	  int	f_pcr;
+	  int	f_psr;
+	  int	f_fpiaddr;
+	  int	f_fpregs[8][3];		(8 regs, 96 bits each)
+	} fpregset_t;
+
+    These routines provide the packing and unpacking of gregset_t and
+    fpregset_t formatted data.
+
+ */
+
+/* Atari SVR4 has R_SR but not R_PS */
+
+#if !defined (R_PS) && defined (R_SR)
+#define R_PS R_SR
+#endif
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+
+  for (regi = 0 ; regi < R_PC ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regi));
+    }
+  supply_register (PS_REGNUM, (char *) (regp + R_PS));
+  supply_register (PC_REGNUM, (char *) (regp + R_PC));
+}
+
+void
+fill_gregset (gregsetp, regno)
+gregset_t *gregsetp;
+int regno;
+{
+  register int regi;
+  register greg_t *regp = (greg_t *) gregsetp;
+  extern char registers[];
+
+  for (regi = 0 ; regi < R_PC ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regi) = *(int *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+  if ((regno == -1) || (regno == PS_REGNUM))
+    {
+      *(regp + R_PS) = *(int *) &registers[REGISTER_BYTE (PS_REGNUM)];
+    }
+  if ((regno == -1) || (regno == PC_REGNUM))
+    {
+      *(regp + R_PC) = *(int *) &registers[REGISTER_BYTE (PC_REGNUM)];
+    }
+}
+
+#if defined (FP0_REGNUM)
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+fpregset_t *fpregsetp;
+{
+  register int regi;
+  char *from;
+  
+  for (regi = FP0_REGNUM ; regi < FPC_REGNUM ; regi++)
+    {
+      from = (char *) &(fpregsetp -> f_fpregs[regi-FP0_REGNUM][0]);
+      supply_register (regi, from);
+    }
+  supply_register (FPC_REGNUM, (char *) &(fpregsetp -> f_pcr));
+  supply_register (FPS_REGNUM, (char *) &(fpregsetp -> f_psr));
+  supply_register (FPI_REGNUM, (char *) &(fpregsetp -> f_fpiaddr));
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), update the register specified by REGNO from gdb's idea
+    of the current floating point register set.  If REGNO is -1, update
+    them all. */
+
+void
+fill_fpregset (fpregsetp, regno)
+fpregset_t *fpregsetp;
+int regno;
+{
+  int regi;
+  char *to;
+  char *from;
+  extern char registers[];
+
+  for (regi = FP0_REGNUM ; regi < FPC_REGNUM ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &(fpregsetp -> f_fpregs[regi-FP0_REGNUM][0]);
+	  memcpy (to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+  if ((regno == -1) || (regno == FPC_REGNUM))
+    {
+      fpregsetp -> f_pcr = *(int *) &registers[REGISTER_BYTE (FPC_REGNUM)];
+    }
+  if ((regno == -1) || (regno == FPS_REGNUM))
+    {
+      fpregsetp -> f_psr = *(int *) &registers[REGISTER_BYTE (FPS_REGNUM)];
+    }
+  if ((regno == -1) || (regno == FPI_REGNUM))
+    {
+      fpregsetp -> f_fpiaddr = *(int *) &registers[REGISTER_BYTE (FPI_REGNUM)];
+    }
+}
+
+#endif	/* defined (FP0_REGNUM) */
+
+#endif  /* USE_PROC_FS */
+
+#ifdef GET_LONGJMP_TARGET
+/* Figure out where the longjmp will land.  Slurp the args out of the stack.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target(pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR sp, jb_addr;
+
+  sp = read_register(SP_REGNUM);
+
+  if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack */
+			  buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+#endif /* GET_LONGJMP_TARGET */
+
+/* Immediately after a function call, return the saved pc before the frame
+   is setup.  For sun3's, we check for the common case of being inside of a
+   system call, and if so, we know that Sun pushes the call # on the stack
+   prior to doing the trap. */
+
+CORE_ADDR
+m68k_saved_pc_after_call(frame)
+     struct frame_info *frame;
+{
+#ifdef SYSCALL_TRAP
+  int op;
+
+  op = read_memory_integer (frame->pc - SYSCALL_TRAP_OFFSET, 2);
+
+  if (op == SYSCALL_TRAP)
+    return read_memory_integer (read_register (SP_REGNUM) + 4, 4);
+  else
+#endif /* SYSCALL_TRAP */
+    return read_memory_integer (read_register (SP_REGNUM), 4);
+}
+
+void
+_initialize_m68k_tdep ()
+{
+  tm_print_insn = print_insn_m68k;
+}
diff --git a/gdb/m68klinux-nat.c b/gdb/m68klinux-nat.c
new file mode 100644
index 0000000..8367b24
--- /dev/null
+++ b/gdb/m68klinux-nat.c
@@ -0,0 +1,155 @@
+/* Motorola m68k native support for Linux
+   Copyright (C) 1996,1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcore.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/user.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+#include <sys/procfs.h>
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#include "floatformat.h"
+
+#include "target.h"
+
+
+/* This table must line up with REGISTER_NAMES in tm-m68k.h */
+static const int regmap[] = 
+{
+  PT_D0, PT_D1, PT_D2, PT_D3, PT_D4, PT_D5, PT_D6, PT_D7,
+  PT_A0, PT_A1, PT_A2, PT_A3, PT_A4, PT_A5, PT_A6, PT_USP,
+  PT_SR, PT_PC,
+  /* PT_FP0, ..., PT_FP7 */
+  21, 24, 27, 30, 33, 36, 39, 42,
+  /* PT_FPCR, PT_FPSR, PT_FPIAR */
+  45, 46, 47
+};
+
+/* BLOCKEND is the value of u.u_ar0, and points to the place where GS
+   is stored.  */
+
+int
+m68k_linux_register_u_addr (blockend, regnum)
+     int blockend;
+     int regnum;
+{
+    return (blockend + 4 * regmap[regnum]);
+}
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+
+/* Note both m68k-tdep.c and m68klinux-nat.c contain definitions
+   for supply_gregset and supply_fpregset. The definitions
+   in m68k-tdep.c are valid if USE_PROC_FS is defined. Otherwise,
+   the definitions in m68klinux-nat.c will be used. This is a 
+   bit of a hack. The supply_* routines do not belong in 
+   *_tdep.c files. But, there are several lynx ports that currently 
+   depend on these definitions. */ 
+
+#ifndef USE_PROC_FS
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  int regi;
+
+  for (regi = D0_REGNUM ; regi <= SP_REGNUM ; regi++)
+    supply_register (regi, (char *) (*gregsetp + regmap[regi]));
+  supply_register (PS_REGNUM, (char *) (*gregsetp + PT_SR));
+  supply_register (PC_REGNUM, (char *) (*gregsetp + PT_PC));
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  int regi;
+
+  for (regi = FP0_REGNUM ; regi < FPC_REGNUM ; regi++)
+    supply_register (regi, (char *) &fpregsetp->fpregs[(regi - FP0_REGNUM) * 3]);
+  supply_register (FPC_REGNUM, (char *) &fpregsetp->fpcntl[0]);
+  supply_register (FPS_REGNUM, (char *) &fpregsetp->fpcntl[1]);
+  supply_register (FPI_REGNUM, (char *) &fpregsetp->fpcntl[2]);
+}
+
+#endif
+
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+/* Return non-zero if PC points into the signal trampoline.  */
+
+int
+in_sigtramp (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR sp;
+  char buf[TARGET_SHORT_BIT / TARGET_CHAR_BIT];
+  int insn;
+
+  sp = read_register (SP_REGNUM);
+  if (pc - 2 < sp)
+    return 0;
+
+  if (read_memory_nobpt (pc, buf, sizeof (buf)))
+    return 0;
+  insn = extract_unsigned_integer (buf, sizeof (buf));
+  if (insn == 0xdefc /* addaw #,sp */
+      || insn == 0x7077 /* moveq #119,d0 */
+      || insn == 0x4e40 /* trap #0 */
+      || insn == 0x203c /* movel #,d0 */)
+    return 1;
+
+  if (read_memory_nobpt (pc - 2, buf, sizeof (buf)))
+    return 0;
+  insn = extract_unsigned_integer (buf, sizeof (buf));
+  if (insn == 0xdefc /* addaw #,sp */
+      || insn == 0x7077 /* moveq #119,d0 */
+      || insn == 0x4e40 /* trap #0 */
+      || insn == 0x203c /* movel #,d0 */)
+    return 1;
+
+  return 0;
+}
diff --git a/gdb/m68knbsd-nat.c b/gdb/m68knbsd-nat.c
new file mode 100644
index 0000000..c2e71df
--- /dev/null
+++ b/gdb/m68knbsd-nat.c
@@ -0,0 +1,86 @@
+/* Native-dependent code for Motorola m68k's running NetBSD, for GDB.
+   Copyright 1988, 1989, 1991, 1992, 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <sys/types.h>
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+#include <machine/frame.h>
+
+#include "defs.h"
+#include "inferior.h"
+
+void
+fetch_inferior_registers(regno)
+     int regno;
+{
+  struct reg inferior_registers;
+  struct fpreg inferior_fp_registers;
+
+  ptrace (PT_GETREGS, inferior_pid, 
+	  (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+  memcpy (&registers[REGISTER_BYTE (0)], &inferior_registers, 
+	  sizeof(inferior_registers));
+
+  ptrace (PT_GETFPREGS, inferior_pid, 
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0);
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers, 
+	  sizeof(inferior_fp_registers));
+
+  registers_fetched ();
+}
+
+void
+store_inferior_registers(regno)
+     int regno;
+{
+  struct reg inferior_registers;
+  struct fpreg inferior_fp_registers;
+
+  memcpy (&inferior_registers, &registers[REGISTER_BYTE (0)],
+	  sizeof(inferior_registers));
+  ptrace (PT_SETREGS, inferior_pid, 
+	  (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+
+  memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	  sizeof(inferior_fp_registers));
+  ptrace (PT_SETFPREGS, inferior_pid, 
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0);
+}
+
+struct md_core {
+  struct reg intreg; 
+  struct fpreg freg;
+};
+
+void
+fetch_core_registers (core_reg_sect, core_reg_size, which, ignore)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR ignore;
+{
+  struct md_core *core_reg = (struct md_core *)core_reg_sect;
+  
+  /* Integer registers */
+  memcpy(&registers[REGISTER_BYTE (0)],
+	 &core_reg->intreg, sizeof(struct reg));
+  /* Floating point registers */
+  memcpy(&registers[REGISTER_BYTE (FP0_REGNUM)],
+	 &core_reg->freg, sizeof(struct fpreg));
+}
diff --git a/gdb/m88k-nat.c b/gdb/m88k-nat.c
new file mode 100644
index 0000000..19e9392
--- /dev/null
+++ b/gdb/m88k-nat.c
@@ -0,0 +1,285 @@
+/* Native-dependent Motorola 88xxx support for GDB, the GNU Debugger.
+   Copyright 1988, 1990, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include "gdbcore.h"
+#include <sys/user.h>
+
+#ifndef USER			/* added to support BCS ptrace_user */
+#define USER ptrace_user
+#endif
+#include <sys/ioctl.h>
+#include <fcntl.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+#include "symtab.h"
+#include "setjmp.h"
+#include "value.h"
+
+#ifdef DELTA88
+#include <sys/ptrace.h>
+
+/* define offsets to the pc instruction offsets in ptrace_user struct */
+#define SXIP_OFFSET ((char *)&u.pt_sigframe.sig_sxip - (char *)&u)
+#define SNIP_OFFSET ((char *)&u.pt_sigframe.sig_snip - (char *)&u)
+#define SFIP_OFFSET ((char *)&u.pt_sigframe.sig_sfip - (char *)&u)
+#else
+/* define offsets to the pc instruction offsets in ptrace_user struct */
+#define SXIP_OFFSET ((char *)&u.pt_sigframe.dg_sigframe.sc_sxip - (char *)&u)
+#define SNIP_OFFSET ((char *)&u.pt_sigframe.dg_sigframe.sc_snip - (char *)&u)
+#define SFIP_OFFSET ((char *)&u.pt_sigframe.dg_sigframe.sc_sfip - (char *)&u)
+#endif
+
+extern int have_symbol_file_p();
+
+extern jmp_buf stack_jmp;
+
+extern int errno;
+extern char registers[REGISTER_BYTES];
+
+void
+fetch_inferior_registers (regno)
+     int regno;		/* Original value discarded */
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  struct USER u;
+  unsigned int offset;
+
+  offset = (char *) &u.pt_r0 - (char *) &u; 
+  regaddr = offset; /* byte offset to r0;*/
+
+/*  offset = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) offset, 0) - KERNEL_U_ADDR; */
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      /*regaddr = register_addr (regno, offset);*/
+	/* 88k enhancement  */
+        
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+ 	{
+ 	  *(int *) &buf[i] = ptrace (3, inferior_pid,
+				     (PTRACE_ARG3_TYPE) regaddr, 0);
+ 	  regaddr += sizeof (int);
+ 	}
+      supply_register (regno, buf);
+    }
+    /* now load up registers 36 - 38; special pc registers */
+    *(int *) &buf[0] = ptrace (3,inferior_pid,
+			       (PTRACE_ARG3_TYPE) SXIP_OFFSET ,0);
+    supply_register (SXIP_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) SNIP_OFFSET,0);
+    supply_register (SNIP_REGNUM, buf);
+    *(int *) &buf[0] = ptrace (3, inferior_pid,
+			       (PTRACE_ARG3_TYPE) SFIP_OFFSET,0);
+    supply_register (SFIP_REGNUM, buf);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  struct USER u;
+
+  unsigned int offset = (char *) &u.pt_r0 - (char *) &u;
+
+  regaddr = offset;
+
+  /* Don't try to deal with EXIP_REGNUM or ENIP_REGNUM, because I think either
+     svr3 doesn't run on an 88110, or the kernel isolates the different (not
+     completely sure this is true, but seems to be.  */
+  if (regno >= 0)
+    {
+      /*      regaddr = register_addr (regno, offset); */
+      if (regno < PC_REGNUM)
+	{ 
+	  regaddr = offset + regno * sizeof (int);
+	  errno = 0;
+	  ptrace (6, inferior_pid,
+		  (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
+	  if (errno != 0)
+	    {
+	      sprintf (buf, "writing register number %d", regno);
+	      perror_with_name (buf);
+	    }
+	}
+      else if (regno == SXIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SXIP_OFFSET, read_register(regno));
+      else if (regno == SNIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SNIP_OFFSET, read_register(regno));
+      else if (regno == SFIP_REGNUM)
+	ptrace (6, inferior_pid,
+		(PTRACE_ARG3_TYPE) SFIP_OFFSET, read_register(regno));
+      else
+	printf_unfiltered ("Bad register number for store_inferior routine\n");
+    }
+  else
+    { 
+      for (regno = 0; regno < PC_REGNUM; regno++)
+	{
+	  /*      regaddr = register_addr (regno, offset); */
+	  errno = 0;
+	  regaddr = offset + regno * sizeof (int);
+	  ptrace (6, inferior_pid,
+		  (PTRACE_ARG3_TYPE) regaddr, read_register (regno));
+	  if (errno != 0)
+	    {
+	      sprintf (buf, "writing register number %d", regno);
+	      perror_with_name (buf);
+	    }
+	}
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SXIP_OFFSET,read_register(SXIP_REGNUM));
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SNIP_OFFSET,read_register(SNIP_REGNUM));
+      ptrace (6,inferior_pid,
+	      (PTRACE_ARG3_TYPE) SFIP_OFFSET,read_register(SFIP_REGNUM));
+    }
+}
+
+
+/* blockend is the address of the end of the user structure */
+m88k_register_u_addr (blockend, regnum)
+{
+  struct USER u;
+  int ustart = blockend - sizeof (struct USER);
+  switch (regnum)
+    {
+    case 0:
+    case 1:
+    case 2:
+    case 3:
+    case 4:
+    case 5:
+    case 6:
+    case 7:
+    case 8:
+    case 9:
+    case 10:
+    case 11:
+    case 12:
+    case 13:
+    case 14:
+    case 15:
+    case 16:
+    case 17:
+    case 18:
+    case 19:
+    case 20:
+    case 21:
+    case 22:
+    case 23:
+    case 24:
+    case 25:
+    case 26:
+    case 27:
+    case 28:
+    case 29:
+    case 30:
+    case 31:
+      return (ustart + ((int) &u.pt_r0 - (int) &u) + REGISTER_SIZE * regnum);
+    case PSR_REGNUM:  return (ustart + ((int) &u.pt_psr - (int) &u));
+    case FPSR_REGNUM: return (ustart + ((int) &u.pt_fpsr - (int) &u));
+    case FPCR_REGNUM: return (ustart + ((int) &u.pt_fpcr - (int) &u));
+    case SXIP_REGNUM: return (ustart + SXIP_OFFSET); 
+    case SNIP_REGNUM: return (ustart + SNIP_OFFSET);
+    case SFIP_REGNUM: return (ustart + SFIP_OFFSET); 
+    default: 
+	if (regnum < NUM_REGS)
+	    /* The register is one of those which is not defined...
+	       give it zero */
+	    return (ustart + ((int) &u.pt_r0 - (int) &u));
+	else
+	    return (blockend + REGISTER_SIZE * regnum);
+    }
+}
+
+#ifdef USE_PROC_FS
+
+#include <sys/procfs.h>
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+    register int regi;
+    register greg_t *regp = (greg_t *) gregsetp;
+
+    for (regi=0; regi <= SP_REGNUM; regi++)
+	supply_register (regi, (char *) (regp + regi));
+
+    supply_register (SXIP_REGNUM, (char *) (regp + R_XIP));
+    supply_register (SNIP_REGNUM, (char *) (regp + R_NIP));
+    supply_register (SFIP_REGNUM, (char *) (regp + R_FIP));
+    supply_register (PSR_REGNUM, (char *) (regp + R_PSR));
+    supply_register (FPSR_REGNUM, (char *) (regp + R_FPSR));
+    supply_register (FPCR_REGNUM, (char *) (regp + R_FPCR));
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+    int regi;
+    register greg_t *regp = (greg_t *) gregsetp;
+    extern char registers[];
+
+    for (regi = 0 ; regi <= R_R31 ; regi++)
+	if ((regno == -1) || (regno == regi))
+	    *(regp + regi) = *(int *) &registers[REGISTER_BYTE(regi)];
+
+    if ((regno == -1) || (regno == SXIP_REGNUM))
+	*(regp + R_XIP) = *(int *) &registers[REGISTER_BYTE(SXIP_REGNUM)];
+    if ((regno == -1) || (regno == SNIP_REGNUM))
+	*(regp + R_NIP) = *(int *) &registers[REGISTER_BYTE(SNIP_REGNUM)];
+    if ((regno == -1) || (regno == SFIP_REGNUM))
+	*(regp + R_FIP) = *(int *) &registers[REGISTER_BYTE(SFIP_REGNUM)];
+    if ((regno == -1) || (regno == PSR_REGNUM))
+	*(regp + R_PSR) = *(int *) &registers[REGISTER_BYTE(PSR_REGNUM)];
+    if ((regno == -1) || (regno == FPSR_REGNUM))
+	*(regp + R_FPSR) = *(int *) &registers[REGISTER_BYTE(FPSR_REGNUM)];
+    if ((regno == -1) || (regno == FPCR_REGNUM))
+	*(regp + R_FPCR) = *(int *) &registers[REGISTER_BYTE(FPCR_REGNUM)];
+}
+
+#endif /* USE_PROC_FS */
diff --git a/gdb/m88k-tdep.c b/gdb/m88k-tdep.c
new file mode 100644
index 0000000..f82cb76
--- /dev/null
+++ b/gdb/m88k-tdep.c
@@ -0,0 +1,629 @@
+/* Target-machine dependent code for Motorola 88000 series, for GDB.
+   Copyright 1988, 1990, 1991, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "symtab.h"
+#include "setjmp.h"
+#include "value.h"
+
+/* Size of an instruction */
+#define	BYTES_PER_88K_INSN	4
+
+void frame_find_saved_regs ();
+
+/* Is this target an m88110?  Otherwise assume m88100.  This has
+   relevance for the ways in which we screw with instruction pointers.  */
+
+int target_is_m88110 = 0;
+
+/* The m88k kernel aligns all instructions on 4-byte boundaries.  The
+   kernel also uses the least significant two bits for its own hocus
+   pocus.  When gdb receives an address from the kernel, it needs to
+   preserve those right-most two bits, but gdb also needs to be careful
+   to realize that those two bits are not really a part of the address
+   of an instruction.  Shrug.  */
+
+CORE_ADDR
+m88k_addr_bits_remove (addr)
+     CORE_ADDR addr;
+{
+  return ((addr) & ~3);
+}
+
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+   For us, the frame address is its stack pointer value, so we look up
+   the function prologue to determine the caller's sp value, and return it.  */
+
+CORE_ADDR
+frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+
+  frame_find_saved_regs (thisframe, (struct frame_saved_regs *) 0);
+  /* NOTE:  this depends on frame_find_saved_regs returning the VALUE, not
+ 	    the ADDRESS, of SP_REGNUM.  It also depends on the cache of
+	    frame_find_saved_regs results.  */
+  if (thisframe->fsr->regs[SP_REGNUM])
+    return thisframe->fsr->regs[SP_REGNUM];
+  else
+    return thisframe->frame;	/* Leaf fn -- next frame up has same SP. */
+}
+
+int
+frameless_function_invocation (frame)
+     struct frame_info *frame;
+{
+
+  frame_find_saved_regs (frame, (struct frame_saved_regs *) 0);
+  /* NOTE:  this depends on frame_find_saved_regs returning the VALUE, not
+ 	    the ADDRESS, of SP_REGNUM.  It also depends on the cache of
+	    frame_find_saved_regs results.  */
+  if (frame->fsr->regs[SP_REGNUM])
+    return 0;			/* Frameful -- return addr saved somewhere */
+  else
+    return 1;			/* Frameless -- no saved return address */
+}
+
+void
+init_extra_frame_info (fromleaf, frame)
+     int fromleaf;
+     struct frame_info *frame;
+{
+  frame->fsr = 0;			/* Not yet allocated */
+  frame->args_pointer = 0;		/* Unknown */
+  frame->locals_pointer = 0;	/* Unknown */
+}
+
+/* Examine an m88k function prologue, recording the addresses at which
+   registers are saved explicitly by the prologue code, and returning
+   the address of the first instruction after the prologue (but not
+   after the instruction at address LIMIT, as explained below).
+
+   LIMIT places an upper bound on addresses of the instructions to be
+   examined.  If the prologue code scan reaches LIMIT, the scan is
+   aborted and LIMIT is returned.  This is used, when examining the
+   prologue for the current frame, to keep examine_prologue () from
+   claiming that a given register has been saved when in fact the
+   instruction that saves it has not yet been executed.  LIMIT is used
+   at other times to stop the scan when we hit code after the true
+   function prologue (e.g. for the first source line) which might
+   otherwise be mistaken for function prologue.
+
+   The format of the function prologue matched by this routine is
+   derived from examination of the source to gcc 1.95, particularly
+   the routine output_prologue () in config/out-m88k.c.
+
+   subu r31,r31,n			# stack pointer update
+
+   (st rn,r31,offset)?			# save incoming regs
+   (st.d rn,r31,offset)?
+
+   (addu r30,r31,n)?			# frame pointer update
+
+   (pic sequence)?			# PIC code prologue
+
+   (or   rn,rm,0)?			# Move parameters to other regs
+*/
+
+/* Macros for extracting fields from instructions.  */
+
+#define BITMASK(pos, width) (((0x1 << (width)) - 1) << (pos))
+#define EXTRACT_FIELD(val, pos, width) ((val) >> (pos) & BITMASK (0, width))
+#define	SUBU_OFFSET(x)	((unsigned)(x & 0xFFFF))
+#define	ST_OFFSET(x)	((unsigned)((x) & 0xFFFF))
+#define	ST_SRC(x)	EXTRACT_FIELD ((x), 21, 5)
+#define	ADDU_OFFSET(x)	((unsigned)(x & 0xFFFF))
+
+/*
+ * prologue_insn_tbl is a table of instructions which may comprise a
+ * function prologue.  Associated with each table entry (corresponding
+ * to a single instruction or group of instructions), is an action.
+ * This action is used by examine_prologue (below) to determine
+ * the state of certain machine registers and where the stack frame lives.
+ */
+
+enum prologue_insn_action {
+  PIA_SKIP,			/* don't care what the instruction does */
+  PIA_NOTE_ST,			/* note register stored and where */
+  PIA_NOTE_STD,			/* note pair of registers stored and where */
+  PIA_NOTE_SP_ADJUSTMENT,	/* note stack pointer adjustment */
+  PIA_NOTE_FP_ASSIGNMENT,	/* note frame pointer assignment */
+  PIA_NOTE_PROLOGUE_END,	/* no more prologue */
+};
+
+struct prologue_insns {
+    unsigned long insn;
+    unsigned long mask;
+    enum prologue_insn_action action;
+};
+
+struct prologue_insns prologue_insn_tbl[] = {
+  /* Various register move instructions */
+  { 0x58000000, 0xf800ffff, PIA_SKIP },		/* or/or.u with immed of 0 */
+  { 0xf4005800, 0xfc1fffe0, PIA_SKIP },		/* or rd, r0, rs */
+  { 0xf4005800, 0xfc00ffff, PIA_SKIP },		/* or rd, rs, r0 */
+
+  /* Stack pointer setup: "subu sp, sp, n" where n is a multiple of 8 */
+  { 0x67ff0000, 0xffff0007, PIA_NOTE_SP_ADJUSTMENT },
+
+  /* Frame pointer assignment: "addu r30, r31, n" */
+  { 0x63df0000, 0xffff0000, PIA_NOTE_FP_ASSIGNMENT },
+
+  /* Store to stack instructions; either "st rx, sp, n" or "st.d rx, sp, n" */
+  { 0x241f0000, 0xfc1f0000, PIA_NOTE_ST },	/* st rx, sp, n */
+  { 0x201f0000, 0xfc1f0000, PIA_NOTE_STD },	/* st.d rs, sp, n */
+
+  /* Instructions needed for setting up r25 for pic code. */
+  { 0x5f200000, 0xffff0000, PIA_SKIP },		/* or.u r25, r0, offset_high */
+  { 0xcc000002, 0xffffffff, PIA_SKIP },		/* bsr.n Lab */
+  { 0x5b390000, 0xffff0000, PIA_SKIP },		/* or r25, r25, offset_low */
+  { 0xf7396001, 0xffffffff, PIA_SKIP },		/* Lab: addu r25, r25, r1 */
+
+  /* Various branch or jump instructions which have a delay slot -- these
+     do not form part of the prologue, but the instruction in the delay
+     slot might be a store instruction which should be noted. */
+  { 0xc4000000, 0xe4000000, PIA_NOTE_PROLOGUE_END }, 
+  					/* br.n, bsr.n, bb0.n, or bb1.n */
+  { 0xec000000, 0xfc000000, PIA_NOTE_PROLOGUE_END }, /* bcnd.n */
+  { 0xf400c400, 0xfffff7e0, PIA_NOTE_PROLOGUE_END } /* jmp.n or jsr.n */
+
+};
+
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+   is not the address of a valid instruction, the address of the next
+   instruction beyond ADDR otherwise.  *PWORD1 receives the first word
+   of the instruction. */
+
+#define NEXT_PROLOGUE_INSN(addr, lim, pword1) \
+  (((addr) < (lim)) ? next_insn (addr, pword1) : 0)
+
+/* Read the m88k instruction at 'memaddr' and return the address of 
+   the next instruction after that, or 0 if 'memaddr' is not the
+   address of a valid instruction.  The instruction
+   is stored at 'pword1'.  */
+
+CORE_ADDR
+next_insn (memaddr, pword1)
+     unsigned long *pword1;
+     CORE_ADDR memaddr;
+{
+  *pword1 = read_memory_integer (memaddr, BYTES_PER_88K_INSN);
+  return memaddr + BYTES_PER_88K_INSN;
+}
+
+/* Read a register from frames called by us (or from the hardware regs).  */
+
+static int
+read_next_frame_reg(frame, regno)
+     struct frame_info *frame;
+     int regno;
+{
+  for (; frame; frame = frame->next) {
+      if (regno == SP_REGNUM)
+	return FRAME_FP (frame);
+      else if (frame->fsr->regs[regno])
+	return read_memory_integer(frame->fsr->regs[regno], 4);
+  }
+  return read_register(regno);
+}
+
+/* Examine the prologue of a function.  `ip' points to the first instruction.
+   `limit' is the limit of the prologue (e.g. the addr of the first 
+   linenumber, or perhaps the program counter if we're stepping through).
+   `frame_sp' is the stack pointer value in use in this frame.  
+   `fsr' is a pointer to a frame_saved_regs structure into which we put
+   info about the registers saved by this frame.  
+   `fi' is a struct frame_info pointer; we fill in various fields in it
+   to reflect the offsets of the arg pointer and the locals pointer.  */
+
+static CORE_ADDR
+examine_prologue (ip, limit, frame_sp, fsr, fi)
+     register CORE_ADDR ip;
+     register CORE_ADDR limit;
+     CORE_ADDR frame_sp;
+     struct frame_saved_regs *fsr;
+     struct frame_info *fi;
+{
+  register CORE_ADDR next_ip;
+  register int src;
+  unsigned int insn;
+  int size, offset;
+  char must_adjust[32];		/* If set, must adjust offsets in fsr */
+  int sp_offset = -1;		/* -1 means not set (valid must be mult of 8) */
+  int fp_offset = -1;		/* -1 means not set */
+  CORE_ADDR frame_fp;
+  CORE_ADDR prologue_end = 0;
+
+  memset (must_adjust, '\0', sizeof (must_adjust));
+  next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn);
+
+  while (next_ip)
+    {
+      struct prologue_insns *pip; 
+
+      for (pip=prologue_insn_tbl; (insn & pip->mask) != pip->insn; )
+	  if (++pip >= prologue_insn_tbl + sizeof prologue_insn_tbl)
+	      goto end_of_prologue_found;	/* not a prologue insn */
+
+      switch (pip->action)
+	{
+	  case PIA_NOTE_ST:
+	  case PIA_NOTE_STD:
+	    if (sp_offset != -1) {
+		src = ST_SRC (insn);
+		offset = ST_OFFSET (insn);
+		must_adjust[src] = 1;
+		fsr->regs[src++] = offset;	/* Will be adjusted later */
+		if (pip->action == PIA_NOTE_STD && src < 32)
+		  {
+		    offset += 4;
+		    must_adjust[src] = 1;
+		    fsr->regs[src++] = offset;
+		  }
+	    }
+	    else
+		goto end_of_prologue_found;
+	    break;
+	  case PIA_NOTE_SP_ADJUSTMENT:
+	    if (sp_offset == -1)
+		sp_offset = -SUBU_OFFSET (insn);
+	    else
+		goto end_of_prologue_found;
+	    break;
+	  case PIA_NOTE_FP_ASSIGNMENT:
+	    if (fp_offset == -1)
+		fp_offset = ADDU_OFFSET (insn);
+	    else
+		goto end_of_prologue_found;
+	    break;
+	  case PIA_NOTE_PROLOGUE_END:
+	    if (!prologue_end)
+		prologue_end = ip;
+	    break;
+	  case PIA_SKIP:
+	  default :
+	    /* Do nothing */
+	    break;
+	}
+
+      ip = next_ip;
+      next_ip = NEXT_PROLOGUE_INSN (ip, limit, &insn);
+    }
+
+end_of_prologue_found:
+
+    if (prologue_end)
+	ip = prologue_end;
+
+  /* We're done with the prologue.  If we don't care about the stack
+     frame itself, just return.  (Note that fsr->regs has been trashed,
+     but the one caller who calls with fi==0 passes a dummy there.)  */
+
+  if (fi == 0)
+    return ip;
+
+  /*
+     OK, now we have:
+
+     	sp_offset	original (before any alloca calls) displacement of SP
+			(will be negative).
+
+	fp_offset	displacement from original SP to the FP for this frame
+			or -1.
+
+	fsr->regs[0..31]	displacement from original SP to the stack
+				location where reg[0..31] is stored.
+
+	must_adjust[0..31]	set if corresponding offset was set.
+
+     If alloca has been called between the function prologue and the current
+     IP, then the current SP (frame_sp) will not be the original SP as set by
+     the function prologue.  If the current SP is not the original SP, then the
+     compiler will have allocated an FP for this frame, fp_offset will be set,
+     and we can use it to calculate the original SP.
+
+     Then, we figure out where the arguments and locals are, and relocate the
+     offsets in fsr->regs to absolute addresses.  */
+
+  if (fp_offset != -1) {
+    /* We have a frame pointer, so get it, and base our calc's on it.  */
+    frame_fp = (CORE_ADDR) read_next_frame_reg (fi->next, ACTUAL_FP_REGNUM);
+    frame_sp = frame_fp - fp_offset;
+  } else {
+    /* We have no frame pointer, therefore frame_sp is still the same value
+       as set by prologue.  But where is the frame itself?  */
+    if (must_adjust[SRP_REGNUM]) {
+      /* Function header saved SRP (r1), the return address.  Frame starts
+	 4 bytes down from where it was saved.  */
+      frame_fp = frame_sp + fsr->regs[SRP_REGNUM] - 4;
+      fi->locals_pointer = frame_fp;
+    } else {
+      /* Function header didn't save SRP (r1), so we are in a leaf fn or
+	 are otherwise confused.  */
+      frame_fp = -1;
+    }
+  }
+
+  /* The locals are relative to the FP (whether it exists as an allocated
+     register, or just as an assumed offset from the SP) */
+  fi->locals_pointer = frame_fp;
+
+  /* The arguments are just above the SP as it was before we adjusted it
+     on entry.  */
+  fi->args_pointer = frame_sp - sp_offset;
+
+  /* Now that we know the SP value used by the prologue, we know where
+     it saved all the registers.  */
+  for (src = 0; src < 32; src++)
+    if (must_adjust[src])
+      fsr->regs[src] += frame_sp;
+ 
+  /* The saved value of the SP is always known.  */
+  /* (we hope...) */
+  if (fsr->regs[SP_REGNUM] != 0 
+   && fsr->regs[SP_REGNUM] != frame_sp - sp_offset)
+    fprintf_unfiltered(gdb_stderr, "Bad saved SP value %x != %x, offset %x!\n",
+        fsr->regs[SP_REGNUM],
+	frame_sp - sp_offset, sp_offset);
+
+  fsr->regs[SP_REGNUM] = frame_sp - sp_offset;
+
+  return (ip);
+}
+
+/* Given an ip value corresponding to the start of a function,
+   return the ip of the first instruction after the function 
+   prologue.  */
+
+CORE_ADDR
+skip_prologue (ip)
+     CORE_ADDR (ip);
+{
+  struct frame_saved_regs saved_regs_dummy;
+  struct symtab_and_line sal;
+  CORE_ADDR limit;
+
+  sal = find_pc_line (ip, 0);
+  limit = (sal.end) ? sal.end : 0xffffffff;
+
+  return (examine_prologue (ip, limit, (CORE_ADDR) 0, &saved_regs_dummy,
+			    (struct frame_info *)0 ));
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   We cache the result of doing this in the frame_obstack, since it is
+   fairly expensive.  */
+
+void
+frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  register struct frame_saved_regs *cache_fsr;
+  CORE_ADDR ip;
+  struct symtab_and_line sal;
+  CORE_ADDR limit;
+
+  if (!fi->fsr)
+    {
+      cache_fsr = (struct frame_saved_regs *)
+	frame_obstack_alloc (sizeof (struct frame_saved_regs));
+      memset (cache_fsr, '\0', sizeof (struct frame_saved_regs));
+      fi->fsr = cache_fsr;
+
+      /* Find the start and end of the function prologue.  If the PC
+	 is in the function prologue, we only consider the part that
+	 has executed already.  In the case where the PC is not in
+	 the function prologue, we set limit to two instructions beyond
+	 where the prologue ends in case if any of the prologue instructions
+	 were moved into a delay slot of a branch instruction. */
+         
+      ip = get_pc_function_start (fi->pc);
+      sal = find_pc_line (ip, 0);
+      limit = (sal.end && sal.end < fi->pc) ? sal.end + 2 * BYTES_PER_88K_INSN 
+					    : fi->pc;
+
+      /* This will fill in fields in *fi as well as in cache_fsr.  */
+#ifdef SIGTRAMP_FRAME_FIXUP
+      if (fi->signal_handler_caller)
+	SIGTRAMP_FRAME_FIXUP(fi->frame);
+#endif
+      examine_prologue (ip, limit, fi->frame, cache_fsr, fi);
+#ifdef SIGTRAMP_SP_FIXUP
+      if (fi->signal_handler_caller && fi->fsr->regs[SP_REGNUM])
+	SIGTRAMP_SP_FIXUP(fi->fsr->regs[SP_REGNUM]);
+#endif
+    }
+
+  if (fsr)
+    *fsr = *fi->fsr;
+}
+
+/* Return the address of the locals block for the frame
+   described by FI.  Returns 0 if the address is unknown.
+   NOTE!  Frame locals are referred to by negative offsets from the
+   argument pointer, so this is the same as frame_args_address().  */
+
+CORE_ADDR
+frame_locals_address (fi)
+     struct frame_info *fi;
+{
+  struct frame_saved_regs fsr;
+
+  if (fi->args_pointer)	/* Cached value is likely there.  */
+    return fi->args_pointer;
+
+  /* Nope, generate it.  */
+
+  get_frame_saved_regs (fi, &fsr);
+
+  return fi->args_pointer;
+}
+
+/* Return the address of the argument block for the frame
+   described by FI.  Returns 0 if the address is unknown.  */
+
+CORE_ADDR
+frame_args_address (fi)
+     struct frame_info *fi;
+{
+  struct frame_saved_regs fsr;
+
+  if (fi->args_pointer)		/* Cached value is likely there.  */
+    return fi->args_pointer;
+
+  /* Nope, generate it.  */
+
+  get_frame_saved_regs (fi, &fsr);
+
+  return fi->args_pointer;
+}
+
+/* Return the saved PC from this frame.
+
+   If the frame has a memory copy of SRP_REGNUM, use that.  If not,
+   just use the register SRP_REGNUM itself.  */
+
+CORE_ADDR
+frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  return read_next_frame_reg(frame, SRP_REGNUM);
+}
+
+
+#define DUMMY_FRAME_SIZE 192
+
+static void
+write_word (sp, word)
+     CORE_ADDR sp;
+     ULONGEST word;
+{
+  register int len = REGISTER_SIZE;
+  char buffer[MAX_REGISTER_RAW_SIZE];
+
+  store_unsigned_integer (buffer, len, word);
+  write_memory (sp, buffer, len);
+}
+
+void
+m88k_push_dummy_frame()
+{
+  register CORE_ADDR sp = read_register (SP_REGNUM);
+  register int rn;
+  int offset;
+
+  sp -= DUMMY_FRAME_SIZE;	/* allocate a bunch of space */
+
+  for (rn = 0, offset = 0; rn <= SP_REGNUM; rn++, offset+=4)
+    write_word (sp+offset, read_register(rn));
+  
+  write_word (sp+offset, read_register (SXIP_REGNUM));
+  offset += 4;
+
+  write_word (sp+offset, read_register (SNIP_REGNUM));
+  offset += 4;
+
+  write_word (sp+offset, read_register (SFIP_REGNUM));
+  offset += 4;
+
+  write_word (sp+offset, read_register (PSR_REGNUM));
+  offset += 4;
+
+  write_word (sp+offset, read_register (FPSR_REGNUM));
+  offset += 4;
+
+  write_word (sp+offset, read_register (FPCR_REGNUM));
+  offset += 4;
+
+  write_register (SP_REGNUM, sp);
+  write_register (ACTUAL_FP_REGNUM, sp);
+}
+
+void
+pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR fp;
+  register int regnum;
+  struct frame_saved_regs fsr;
+
+  fp = FRAME_FP (frame);
+  get_frame_saved_regs (frame, &fsr);
+
+  if (PC_IN_CALL_DUMMY (read_pc (), read_register (SP_REGNUM), FRAME_FP (fi)))
+    {
+      /* FIXME: I think get_frame_saved_regs should be handling this so
+	 that we can deal with the saved registers properly (e.g. frame
+	 1 is a call dummy, the user types "frame 2" and then "print $ps").  */
+      register CORE_ADDR sp = read_register (ACTUAL_FP_REGNUM);
+      int offset;
+
+      for (regnum = 0, offset = 0; regnum <= SP_REGNUM; regnum++, offset+=4)
+	(void) write_register (regnum, read_memory_integer (sp+offset, 4));
+  
+      write_register (SXIP_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+      write_register (SNIP_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+      write_register (SFIP_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+      write_register (PSR_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+      write_register (FPSR_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+      write_register (FPCR_REGNUM, read_memory_integer (sp+offset, 4));
+      offset += 4;
+
+    }
+  else 
+    {
+      for (regnum = FP_REGNUM ; regnum > 0 ; regnum--)
+	  if (fsr.regs[regnum])
+	      write_register (regnum,
+			      read_memory_integer (fsr.regs[regnum], 4));
+      write_pc (frame_saved_pc (frame));
+    }
+  reinit_frame_cache ();
+}
+
+void
+_initialize_m88k_tdep ()
+{
+  tm_print_insn = print_insn_m88k;
+}
diff --git a/gdb/mac-defs.h b/gdb/mac-defs.h
new file mode 100644
index 0000000..82f7e71
--- /dev/null
+++ b/gdb/mac-defs.h
@@ -0,0 +1,34 @@
+/* Definitions shared between C and Rez files. */
+
+#define mbMain 128
+
+#define mApple 128
+
+#define miAbout 1
+
+#define mFile 129
+
+#define miFileNew 1
+#define miFileOpen 2
+/* 3 */
+#define miFileQuit 4
+
+#define mEdit 130
+
+#define miEditCut 1
+#define miEditCopy 2
+#define miEditPaste 3
+#define miEditClear 4
+
+#define mDebug 131
+
+#define miDebugTarget 1
+/* 2 */
+#define miDebugRun 3
+#define miDebugContinue 4
+#define miDebugStep 5
+#define miDebugNext 6
+
+#define wConsole 128
+
+
diff --git a/gdb/mac-gdb.r b/gdb/mac-gdb.r
new file mode 100644
index 0000000..3736dde
--- /dev/null
+++ b/gdb/mac-gdb.r
@@ -0,0 +1,184 @@
+/* Resource file for MacGDB. */
+
+#include "SysTypes.r"
+#include "Types.r"
+
+#include "mac-defs.h"
+
+/* Version resources. */
+
+resource 'vers' (1) {
+	0,
+	0,
+	0,
+	0,
+	verUS,
+	VERSION_STRING,
+	VERSION_STRING  " (C) 1986-95 FSF, Inc."
+};
+
+resource 'vers' (2, purgeable)  {
+	0,
+	0,
+	0,
+	0,
+	verUs,
+	VERSION_STRING,
+	"GDB " VERSION_STRING " for MPW"
+};
+
+#ifdef WANT_CFRG
+
+#include "CodeFragmentTypes.r"
+
+resource 'cfrg' (0) {
+	{
+		kPowerPC,
+		kFullLib,
+		kNoVersionNum, kNoVersionNum,
+		0, 0,
+		kIsApp, kOnDiskFlat, kZeroOffset, kWholeFork,
+		PROG_NAME
+	}
+};
+
+#endif /* WANT_CFRG */
+
+#ifdef Macgdb /* Exclude the following from SIOWgdb which uses SIOW.r.  */
+
+resource 'MBAR' (128) {
+	{ mApple, mFile, mEdit, mDebug };
+};
+
+resource 'MENU' (mApple, preload) {
+	mApple,
+	textMenuProc,
+	0x7FFFFFFD,
+	enabled,
+	apple,
+	{
+		"About...", noIcon, noKey, noMark, plain,
+		"-", noIcon, noKey, noMark, plain
+	}
+};
+
+resource 'MENU' (mFile, preload) {
+	mFile,
+	textMenuProc,
+	allEnabled,
+	enabled,
+	"File",
+	{
+		"New", noIcon, noKey, noMark, plain,
+		"Open...", noIcon, "O", noMark, plain,
+		"-", noIcon, noKey, noMark, plain,
+		"Quit", noIcon, "Q", noMark, plain
+	}
+};
+
+resource 'MENU' (mEdit, preload) {
+	mEdit,
+	textMenuProc,
+	allEnabled,
+	enabled,
+	"Edit",
+	{
+		"Undo", noIcon, "Z", noMark, plain,
+		"-", noIcon, noKey, noMark, plain,
+		"Cut", noIcon, "X", noMark, plain,
+		"Copy", noIcon, "C", noMark, plain,
+		"Paste", noIcon, "V", noMark, plain,
+		"Clear", noIcon, noKey, noMark, plain
+	}
+};
+
+resource 'MENU' (mDebug, preload) {
+	mDebug,
+	textMenuProc,
+	allEnabled,
+	enabled,
+	"Debug",
+	{
+		"Target", noIcon, "T", noMark, plain,
+		"-", noIcon, noKey, noMark, plain,
+		"Run", noIcon, "R", noMark, plain,
+		"Continue", noIcon, "K", noMark, plain,
+		"Step", noIcon, "S", noMark, plain,
+		"Next", noIcon, "N", noMark, plain
+	}
+};
+
+resource 'ALRT' (128) {
+	{40, 40, 180, 420},
+	128,
+	{	/* array: 4 elements */
+		/* [1] */
+		OK, visible, sound1,
+		/* [2] */
+		OK, visible, sound1,
+		/* [3] */
+		OK, visible, sound1,
+		/* [4] */
+		OK, visible, sound1
+	}
+};
+
+resource 'DITL' (128) {
+	{	/* array DITLarray: 2 elements */
+		/* [1] */
+		{110, 150, 128, 200},
+		Button {
+			enabled,
+			"OK"
+		},
+		/* [2] */
+		{10, 10, 100, 370},
+		StaticText {
+			disabled,
+			"GDB 4.12.3\n"
+			"Copyright ©  1994 Free Software Foundation, Inc.\n"
+		},
+	}
+};
+
+resource 'WIND' (wConsole, preload, purgeable) {
+	{40, 40, 310, 572},
+	zoomDocProc,
+	visible,
+	goAway,
+	0x0,
+	"GDB Console"
+};
+
+resource 'SIZE' (-1) {
+	reserved,
+	acceptSuspendResumeEvents,
+	reserved,
+	canBackground,
+	multiFinderAware,
+	backgroundAndForeground,
+	dontGetFrontClicks,
+	ignoreChildDiedEvents,
+	not32BitCompatible,
+	isHighLevelEventAware,
+	localAndRemoteHLEvents,
+	notStationeryAware,
+	dontUseTextEditServices,
+	reserved,
+	reserved,
+	reserved,
+	5000*1024,
+	2000*1024
+};
+
+resource 'DLOG' (128) {
+	{40, 40, 240, 280},
+	documentProc,
+	visible,
+	goAway,
+	0x0,
+	128,
+	""
+};
+
+#endif
diff --git a/gdb/mac-nat.c b/gdb/mac-nat.c
new file mode 100644
index 0000000..3518fe5
--- /dev/null
+++ b/gdb/mac-nat.c
@@ -0,0 +1,412 @@
+/* Target-vector operations for controlling Mac applications, for GDB.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+   Written by Stan Shebs.  Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without eve nthe implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Note that because all the available Mac compilers are ANSI or very
+   close, and this is a native-only file, the code may be purely ANSI.  */
+
+#include "defs.h"
+#include "frame.h"		/* required by inferior.h */
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "command.h"
+#include <signal.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include "buildsym.h"
+#include "gdb_string.h"
+#include "gdbthread.h"
+#include "gdbcmd.h"
+
+#include <Processes.h>
+
+/* We call the functions "child_..." rather than "mac_..." so no one
+   is tempted to try to link this with other native-only code.  */
+
+/* Forward declaration */
+
+extern struct target_ops child_ops;
+
+static void child_stop PARAMS ((void));
+
+static void
+child_fetch_inferior_registers (int r)
+{
+  if (r < 0)
+    {
+      for (r = 0; r < NUM_REGS; r++)
+	child_fetch_inferior_registers (r);
+    }
+  else
+    {
+      supply_register (r, 0);
+    }
+}
+
+static void
+child_store_inferior_registers (int r)
+{
+  if (r < 0)
+    {
+      for (r = 0; r < NUM_REGS; r++)
+	child_store_inferior_registers (r);
+    }
+  else
+    {
+      read_register_gen (r, 0);
+    }
+}
+
+static int
+child_wait (int pid, struct target_waitstatus *ourstatus)
+{
+}
+
+/* Attach to process PID, then initialize for debugging it.  */
+
+static void
+child_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  ProcessSerialNumber psn;
+  ProcessInfoRec inforec;
+  Str31 name;
+  FSSpecPtr fsspec;
+  OSType code;
+  int pid;
+  char *exec_file;
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+  pid = atoi (args);
+
+  psn.highLongOfPSN = 0;
+  psn.lowLongOfPSN = pid;
+
+  inforec.processInfoLength = sizeof(ProcessInfoRec);
+  inforec.processName = name;
+  inforec.processAppSpec = fsspec;
+
+  if (GetProcessInformation (&psn, &inforec) == noErr)
+    {
+      if (from_tty)
+	{
+	  exec_file = (char *) get_exec_file (0);
+
+	  if (exec_file)
+	    printf_unfiltered ("Attaching to program `%s', %s\n", exec_file,
+			       target_pid_to_str (pid));
+	  else
+	    printf_unfiltered ("Attaching to %s\n", target_pid_to_str (pid));
+
+	  gdb_flush (gdb_stdout);
+	}
+      /* Do we need to do anything special? */
+      attach_flag = 1;
+      inferior_pid = pid;
+      push_target (&child_ops);
+    }
+}
+
+static void
+child_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *exec_file;
+
+  if (from_tty)
+    {
+      exec_file = get_exec_file (0);
+      if (exec_file == 0)
+	exec_file = "";
+      printf_unfiltered ("Detaching from program: %s %s\n", exec_file,
+			 target_pid_to_str (inferior_pid));
+      gdb_flush (gdb_stdout);
+    }
+  inferior_pid = 0;
+  unpush_target (&child_ops);
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+child_files_info (ignore)
+     struct target_ops *ignore;
+{
+  printf_unfiltered ("\tUsing the running image of %s %s.\n",
+      attach_flag ? "attached" : "child", target_pid_to_str (inferior_pid));
+}
+
+/* ARGSUSED */
+static void
+child_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Mac application.");
+}
+
+/* Start an inferior Mac program and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().  */
+
+static void
+child_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  LaunchParamBlockRec launchparms;
+  FSSpec fsspec;
+  OSErr launch_err;
+
+  if (!exec_file)
+    {
+      error ("No executable specified, use `target exec'.\n");
+    }
+
+  launchparms.launchBlockID = extendedBlock;
+  launchparms.launchEPBLength = extendedBlockLen;
+  launchparms.launchFileFlags = 0;
+  launchparms.launchControlFlags = launchContinue | launchNoFileFlags;
+  fsspec.vRefNum = 0;
+  fsspec.parID = 0;
+  strcpy(fsspec.name + 1, exec_file);
+  fsspec.name[0] = strlen(exec_file);
+  launchparms.launchAppSpec = &fsspec;
+  launchparms.launchAppParameters = nil;
+
+  launch_err = LaunchApplication (&launchparms);
+
+  if (launch_err == 999 /*memFullErr*/)
+    {
+      error ("Not enough memory to launch %s\n", exec_file);
+    }
+  else if (launch_err != noErr)
+    {
+      error ("Error launching %s, code %d\n", exec_file, launch_err);
+    }
+
+  inferior_pid = launchparms.launchProcessSN.lowLongOfPSN;
+  /* FIXME be sure that high long of PSN is 0 */
+
+  push_target (&child_ops);
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+
+/*  proceed ((CORE_ADDR) - 1, TARGET_SIGNAL_0, 0);  */
+}
+
+static void
+child_mourn_inferior ()
+{
+  unpush_target (&child_ops);
+  generic_mourn_inferior ();
+}
+
+static void
+child_stop ()
+{
+}
+
+int
+child_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+		 int write, struct target_ops *target)
+{
+  int i;
+
+  for (i = 0; i < len; ++i)
+    {
+      if (write)
+	{
+	  ((char *) memaddr)[i] = myaddr[i];
+	}
+      else
+	{
+	  myaddr[i] = ((char *) memaddr)[i];
+	}
+    }
+  return len;
+}
+
+void
+child_kill_inferior (void)
+{
+}
+
+void
+child_resume (int pid, int step, enum target_signal signal)
+{
+}
+
+static void
+child_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static int
+child_can_run ()
+{
+  return 1;
+}
+
+static void
+child_close ()
+{
+}
+
+static void
+info_proc (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  ProcessSerialNumber psn;
+  ProcessInfoRec inforec;
+  Str31 name;
+  FSSpecPtr fsspec;
+  OSType code;
+
+  /* Eventually use args, but not right now. */
+
+  psn.highLongOfPSN = 0;
+  psn.lowLongOfPSN = kNoProcess;
+
+  inforec.processInfoLength = sizeof(ProcessInfoRec);
+  inforec.processName = name;
+  inforec.processAppSpec = fsspec;
+
+  printf_filtered ("Process Name                     Sgnt Type    PSN   Loc Size FreeMem Time\n");
+
+  while (GetNextProcess (&psn) == noErr)
+    {
+      if (GetProcessInformation (&psn, &inforec) == noErr)
+	{
+	  name[name[0] + 1] = '\0';
+	  printf_filtered ("%-32.32s", name + 1);
+	  code = inforec.processSignature;
+	  printf_filtered (" %c%c%c%c",
+			   (code >> 24) & 0xff,
+			   (code >> 16) & 0xff,
+			   (code >>  8) & 0xff,
+			   (code >>  0) & 0xff);
+	  code = inforec.processType;
+	  printf_filtered (" %c%c%c%c",
+			   (code >> 24) & 0xff,
+			   (code >> 16) & 0xff,
+			   (code >>  8) & 0xff,
+			   (code >>  0) & 0xff);
+	  if (psn.highLongOfPSN == 0)
+	    printf_filtered (" %9d", psn.lowLongOfPSN);
+	  else
+	    printf_filtered (" %9d,%9d\n",
+			     psn.highLongOfPSN, psn.lowLongOfPSN);
+	  printf_filtered (" 0x%x", inforec.processLocation);
+	  printf_filtered (" %9d", inforec.processSize);
+	  printf_filtered (" %9d", inforec.processFreeMem);
+	  printf_filtered (" %9d", inforec.processActiveTime);
+	  printf_filtered ("\n");
+	}
+    }
+}
+
+struct target_ops child_ops ;
+
+static void 
+init_child_ops(void)
+{
+  child_ops.to_shortname =   "mac";		
+  child_ops.to_longname =   "MacOS application";
+  child_ops.to_doc    =  "MacOS application (started by the \"run\" command).";
+  child_ops.to_open   =  child_open; 
+  child_ops.to_close  =  child_close;
+  child_ops.to_attach =  child_attach;
+  child_ops.to_post_attach = NULL;
+  child_ops.to_require_attach = NULL;                         /* to_require_attach */  
+  child_ops.to_detach =  child_detach;
+  child_ops.to_require_detach = NULL;                         /* to_require_detach */
+  child_ops.to_resume =  child_resume;
+  child_ops.to_wait   =  child_wait;	
+  child_ops.to_post_wait = NULL;                         /* to_post_wait */
+  child_ops.to_fetch_registers  =   child_fetch_inferior_registers;
+  child_ops.to_store_registers  =   child_store_inferior_registers;
+  child_ops.to_prepare_to_store =   child_prepare_to_store;
+  child_ops.to_xfer_memory =   child_xfer_memory;		
+  child_ops.to_files_info  =   child_files_info;		
+  child_ops.to_insert_breakpoint =   memory_insert_breakpoint;	
+  child_ops.to_remove_breakpoint =   memory_remove_breakpoint;	
+  child_ops.to_terminal_init  =   0;				
+  child_ops.to_terminal_inferior =   0;				
+  child_ops.to_terminal_ours_for_output =  0;
+  child_ops.to_terminal_ours  =   0;			
+  child_ops.to_terminal_info  =   0;			
+  child_ops.to_kill  =   child_kill_inferior;	
+  child_ops.to_load  =   0;	
+  child_ops.to_lookup_symbol   = 0;			
+  child_ops.to_create_inferior = child_create_inferior;
+  child_ops.to_post_startup_inferior = NULL;                         /* to_post_startup_inferior */
+  child_ops.to_acknowledge_created_inferior = NULL;                         /* to_acknowledge_created_inferior */
+  child_ops.to_clone_and_follow_inferior = NULL;                         /* to_clone_and_follow_inferior */
+  child_ops.to_post_follow_inferior_by_clone = NULL;                         /* to_post_follow_inferior_by_clone */
+  child_ops.to_insert_fork_catchpoint = NULL;
+  child_ops.to_remove_fork_catchpoint = NULL;
+  child_ops.to_insert_vfork_catchpoint = NULL;
+  child_ops.to_remove_vfork_catchpoint = NULL;
+  child_ops.to_has_forked = NULL;                         /* to_has_forked */
+  child_ops.to_has_vforked = NULL;                         /* to_has_vforked */
+  child_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  child_ops.to_post_follow_vfork = NULL;                         /* to_post_follow_vfork */
+  child_ops.to_insert_exec_catchpoint = NULL;
+  child_ops.to_remove_exec_catchpoint = NULL;
+  child_ops.to_has_execd = NULL;
+  child_ops.to_reported_exec_events_per_exec_call = NULL;
+  child_ops.to_has_exited = NULL;
+  child_ops.to_mourn_inferior  = child_mourn_inferior;		
+  child_ops.to_can_run         = child_can_run;
+  child_ops.to_notice_signals =  0;      
+  child_ops.to_thread_alive  =   0;       
+  child_ops.to_stop  =   child_stop;      
+  child_ops.to_pid_to_exec_file =  NULL;                         /* to_pid_to_exec_file */
+  child_ops.to_core_file_to_sym_file = NULL;
+  child_ops.to_stratum =   process_stratum;
+  child_ops.DONT_USE =   0; 
+  child_ops.to_has_all_memory = 1; 
+  child_ops.to_has_memory     = 1; 
+  child_ops.to_has_stack      = 1; 
+  child_ops.to_has_registers  = 1; 
+  child_ops.to_has_execution  = 1; 
+  child_ops.to_sections       = 0; 
+  child_ops.to_sections_end   = 0; 
+  child_ops.to_magic =   OPS_MAGIC;
+};
+
+void
+_initialize_mac_nat ()
+{
+  init_child_ops() ;
+
+  add_info ("proc", info_proc,
+	    "Show information about processes.");
+}
diff --git a/gdb/mac-xdep.c b/gdb/mac-xdep.c
new file mode 100644
index 0000000..bf3f78d
--- /dev/null
+++ b/gdb/mac-xdep.c
@@ -0,0 +1,1087 @@
+/* Top level support for Mac interface to GDB, the GNU debugger.
+   Copyright 1994 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Stan Shebs.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+#include <readline/readline.h>
+#include <readline/history.h>
+
+#include <Types.h>
+#include <Resources.h>
+#include <QuickDraw.h>
+#include <Fonts.h>
+#include <Events.h>
+#include <Windows.h>
+#include <Menus.h>
+#include <TextEdit.h>
+#include <Dialogs.h>
+#include <Desk.h>
+#include <ToolUtils.h>
+#include <Memory.h>
+#include <SegLoad.h>
+#include <Files.h>
+#include <Folders.h>
+#include <OSUtils.h>
+#include <OSEvents.h>
+#include <DiskInit.h>
+#include <Packages.h>
+#include <Traps.h>
+#include <Lists.h>
+#include <Gestalt.h>
+#include <PPCToolbox.h>
+#include <AppleEvents.h>
+#include <StandardFile.h>
+#include <Sound.h>
+
+#ifdef MPW
+#define QD(whatever) (qd.##whatever)
+#define QDPat(whatever) (&(qd.##whatever))
+#endif /* MPW */
+
+#ifdef THINK_C
+#define QD(whatever) (whatever)
+#endif
+
+#define p2c(pstr,cbuf)  \
+  strncpy(cbuf, ((char *) (pstr) + 1), pstr[0]);  \
+  cbuf[pstr[0]] = '\0';
+
+#define pascalify(STR) \
+  sprintf(tmpbuf, " %s", STR);  \
+  tmpbuf[0] = strlen(STR);
+
+#include "gdbcmd.h"
+#include "call-cmds.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "signals.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "language.h"
+
+#include "mac-defs.h"
+
+int debug_openp = 0;
+
+/* This is true if we are running as a standalone application.  */
+
+int mac_app;
+
+/* This is true if we are using WaitNextEvent.  */
+
+int use_wne;
+
+/* This is true if we have Color Quickdraw.  */
+
+int has_color_qd;
+
+/* This is true if we are using Color Quickdraw. */
+
+int use_color_qd;
+
+int inbackground;
+
+Rect dragrect = { -32000, -32000, 32000, 32000 };
+Rect sizerect;
+
+int sbarwid = 15;
+
+/* Globals for the console window. */
+
+WindowPtr console_window;
+
+ControlHandle console_v_scrollbar;
+
+Rect console_v_scroll_rect;
+
+TEHandle console_text;
+
+Rect console_text_rect;
+
+/* This will go away eventually. */
+gdb_has_a_terminal () { return 1; }
+
+mac_init ()
+{
+  SysEnvRec se;
+  int eventloopdone = 0;
+  char *str;
+  Boolean gotevent;
+  Point mouse;
+  EventRecord event;
+  WindowPtr win;
+  RgnHandle cursorRgn;
+  int i;
+  Handle menubar;
+  MenuHandle menu;
+  Handle siow_resource;
+
+  mac_app = 0;
+
+  str = getenv("DEBUG_GDB");
+  if (str != NULL && str[0] != '\0')
+    {
+      if (strcmp(str, "openp") == 0)
+	debug_openp = 1;
+    }
+  
+  /* Don't do anything if we`re running under MPW. */
+  if (!StandAlone)
+    return;
+
+  /* Don't do anything if we're using SIOW. */
+  /* This test requires that the siow 0 resource, as defined in
+     {RIncludes}siow.r, not be messed with.  If it is, then the
+     standard Mac setup below will step on SIOW's Mac setup and
+     most likely crash the machine. */
+  siow_resource = GetResource('siow', 0);
+  if (siow_resource != nil)
+    return;
+
+  mac_app = 1;
+
+  /* Do the standard Mac environment setup. */
+  InitGraf (&QD (thePort));
+  InitFonts ();
+  FlushEvents (everyEvent, 0);
+  InitWindows ();
+  InitMenus ();
+  TEInit ();
+  InitDialogs (NULL);
+  InitCursor ();
+
+  /* Color Quickdraw is different from Classic QD. */
+  SysEnvirons(2, &se);
+  has_color_qd = se.hasColorQD;
+  /* Use it if we got it. */
+  use_color_qd = has_color_qd;
+
+  sizerect.top = 50;
+  sizerect.left = 50;
+  sizerect.bottom = 1000;
+  sizerect.right  = 1000;
+#if 0
+  sizerect.bottom = screenBits.bounds.bottom - screenBits.bounds.top;
+  sizerect.right  = screenBits.bounds.right  - screenBits.bounds.left;
+#endif
+
+  /* Set up the menus. */
+  menubar = GetNewMBar (mbMain);
+  SetMenuBar (menubar);
+  /* Add the DAs etc as usual. */
+  menu = GetMHandle (mApple);
+  if (menu != nil) {
+    AddResMenu (menu, 'DRVR');
+  }
+  DrawMenuBar ();
+
+  new_console_window ();
+}
+
+new_console_window ()
+{
+  /* Create the main window we're going to play in. */
+  if (has_color_qd)
+    console_window = GetNewCWindow (wConsole, NULL, (WindowPtr) -1L);
+  else
+    console_window = GetNewWindow (wConsole, NULL, (WindowPtr) -1L);
+
+  SetPort (console_window);
+  console_text_rect = console_window->portRect;
+  /* Leave 8 pixels of blank space, for aesthetic reasons and to
+     make it easier to select from the beginning of a line. */
+  console_text_rect.left += 8;
+  console_text_rect.bottom -= sbarwid - 1;
+  console_text_rect.right -= sbarwid - 1;
+  console_text = TENew (&console_text_rect, &console_text_rect);
+  TESetSelect (0, 40000, console_text);
+  TEDelete (console_text);
+  TEAutoView (1, console_text);
+
+  console_v_scroll_rect = console_window->portRect;
+  console_v_scroll_rect.bottom -= sbarwid - 1;
+  console_v_scroll_rect.left = console_v_scroll_rect.right - sbarwid;
+  console_v_scrollbar =
+    NewControl (console_window, &console_v_scroll_rect,
+		"\p", 1, 0, 0, 0, scrollBarProc, 0L);
+
+  ShowWindow (console_window);
+  SelectWindow (console_window);
+}
+
+mac_command_loop()
+{
+  SysEnvRec se;
+  int eventloopdone = 0;
+  Boolean gotevent;
+  Point mouse;
+  EventRecord event;
+  WindowPtr win;
+  RgnHandle cursorRgn;
+  int i, tm;
+  Handle menubar;
+  MenuHandle menu;
+
+  /* Figure out if the WaitNextEvent Trap is available.  */
+  use_wne =
+    (NGetTrapAddress (0x60, ToolTrap) != NGetTrapAddress (0x9f, ToolTrap));
+  /* Pass WaitNextEvent an empty region the first time through.  */
+  cursorRgn = NewRgn ();
+  /* Go into the main event-handling loop.  */
+  while (!eventloopdone)
+    {
+      /* Use WaitNextEvent if it is available, otherwise GetNextEvent.  */
+      if (use_wne)
+	{
+	  get_global_mouse (&mouse);
+	  adjust_cursor (mouse, cursorRgn);
+	  tm = GetCaretTime();
+	  gotevent = WaitNextEvent (everyEvent, &event, tm, cursorRgn);
+	}
+      else
+	{
+	  SystemTask ();
+	  gotevent = GetNextEvent (everyEvent, &event);
+	}
+      /* First decide if the event is for a dialog or is just any old event. */
+      if (FrontWindow () != nil && IsDialogEvent (&event))
+	{
+	  short itemhit;
+	  DialogPtr dialog;
+      
+	  /* Handle all the modeless dialogs here. */
+	  if (DialogSelect (&event, &dialog, &itemhit))
+	    {
+	    }
+	}
+      else if (gotevent)
+	{
+	  /* Make sure we have the right cursor before handling the event. */
+	  adjust_cursor (event.where, cursorRgn);
+	  do_event (&event);
+	}
+      else
+	{
+	  do_idle ();
+	}
+    }
+}
+
+/* Collect the global coordinates of the mouse pointer.  */
+
+get_global_mouse (mouse)
+Point *mouse;
+{
+  EventRecord evt;
+	
+  OSEventAvail (0, &evt);
+  *mouse = evt.where;
+}
+
+/* Change the cursor's appearance to be appropriate for the given mouse
+   location.  */
+
+adjust_cursor (mouse, region)
+Point mouse;
+RgnHandle region;
+{
+}
+
+/* Decipher an event, maybe do something with it.  */
+
+do_event (evt)
+EventRecord *evt;
+{
+  short part, err, rslt = 0;
+  WindowPtr win;
+  Boolean hit;
+  char key;
+  Point pnt;
+
+  switch (evt->what)
+    {
+    case mouseDown:
+      /* See if the click happened in a special part of the screen. */
+      part = FindWindow (evt->where, &win);
+      switch (part)
+	{
+	case inMenuBar:
+	  adjust_menus ();
+	  do_menu_command (MenuSelect (evt->where));
+	  break;
+	case inSysWindow:
+	  SystemClick (evt, win);
+	  break;
+	case inContent:
+	  if (win != FrontWindow ())
+	    {
+	      /* Bring the clicked-on window to the front. */
+	      SelectWindow (win);
+	      /* Fix the menu to match the new front window. */
+	      adjust_menus ();
+	      /* We always want to discard the event now, since clicks in a
+		 windows are often irreversible actions. */
+	    } else
+	      /* Mouse clicks in the front window do something useful. */
+	      do_mouse_down (win, evt);
+	  break;
+	case inDrag:
+	  /* Standard drag behavior, no tricks necessary. */
+	  DragWindow (win, evt->where, &dragrect);
+	  break;
+	case inGrow:
+	  grow_window (win, evt->where);
+	  break;
+	case inZoomIn:
+	case inZoomOut:
+	  zoom_window (win, evt->where, part);
+	  break;
+	case inGoAway:
+	  close_window (win);
+	  break;
+	}
+      break;
+    case keyDown:
+    case autoKey:
+      key = evt->message & charCodeMask;
+      /* Check for menukey equivalents. */
+      if (evt->modifiers & cmdKey)
+	{
+	  if (evt->what == keyDown)
+	    {
+	      adjust_menus ();
+	      do_menu_command (MenuKey (key));
+	    }
+	}
+      else
+	{
+	  if (evt->what == keyDown)
+	    {
+	      /* Random keypress, interpret it. */
+	      do_keyboard_command (key);
+	    }
+	}
+      break;
+    case activateEvt:
+      activate_window ((WindowPtr) evt->message, evt->modifiers & activeFlag);
+      break;
+    case updateEvt:
+      update_window ((WindowPtr) evt->message);
+      break;
+    case diskEvt:
+      /* Call DIBadMount in response to a diskEvt, so that the user can format
+	 a floppy. (from DTS Sample) */
+      if (HiWord (evt->message) != noErr)
+	{
+	  SetPt (&pnt, 50, 50);
+	  err = DIBadMount (pnt, evt->message);
+	}
+      break;
+    case app4Evt:
+      /* Grab only a single byte. */
+      switch ((evt->message >> 24) & 0xFF)
+	{
+	case 0xfa:
+	  break;
+	case 1:
+	  inbackground = !(evt->message & 1);
+	  activate_window (FrontWindow (), !inbackground);
+	  break;
+	}
+      break;
+    case kHighLevelEvent:
+      AEProcessAppleEvent (evt);
+      break;
+    case nullEvent:
+      do_idle ();
+      rslt = 1;
+      break;
+    default:
+      break;
+    }
+  return rslt;
+}
+
+/* Do any idle-time activities. */
+
+do_idle ()
+{
+  TEIdle (console_text);
+}
+
+grow_window (win, where)
+WindowPtr win;
+Point where;
+{
+  long winsize;
+  int h, v;
+  GrafPtr oldport;
+
+  winsize = GrowWindow (win, where, &sizerect);
+  /* Only do anything if it actually changed size. */
+  if (winsize != 0)
+    {
+      GetPort (&oldport);
+      SetPort (win);
+      if (win == console_window)
+	{
+	  EraseRect (&win->portRect);
+	  h = LoWord (winsize);
+	  v = HiWord (winsize);
+	  SizeWindow (win, h, v, 1);
+	  resize_console_window ();
+	}
+      SetPort (oldport);
+    }
+}
+
+zoom_window (win, where, part)
+WindowPtr win;
+Point where;
+short part;
+{
+  ZoomWindow (win, part, (win == FrontWindow ()));
+  if (win == console_window)
+    {
+      resize_console_window ();
+    }
+}
+
+resize_console_window ()
+{
+  adjust_console_sizes ();
+  adjust_console_scrollbars ();
+  adjust_console_text ();
+  InvalRect (&console_window->portRect);
+}
+
+close_window (win)
+WindowPtr win;
+{
+}
+
+pascal void
+v_scroll_proc (ControlHandle control, short part)
+{
+  int oldval, amount = 0, newval;
+  int pagesize = ((*console_text)->viewRect.bottom - (*console_text)->viewRect.top) / (*console_text)->lineHeight;
+  if (part)
+    {
+      oldval = GetCtlValue (control);
+      switch (part)
+	{
+	case inUpButton:
+	  amount = 1;
+	  break;
+	case inDownButton:
+	  amount = -1;
+	  break;
+	case inPageUp:
+	  amount = pagesize;
+	  break;
+	case inPageDown:
+	  amount = - pagesize;
+	  break;
+	default:
+	  /* (should freak out) */
+	  break;
+	}
+      SetCtlValue(control, oldval - amount);
+      newval = GetCtlValue (control);
+      amount = oldval - newval;
+      if (amount)
+	TEScroll (0, amount * (*console_text)->lineHeight, console_text);
+    }
+}
+
+do_mouse_down (WindowPtr win, EventRecord *event)
+{
+  short part, value;
+  Point mouse;
+  ControlHandle control;
+
+  if (1 /*is_app_window(win)*/)
+    {
+      SetPort (win);
+      mouse = event->where;
+      GlobalToLocal (&mouse);
+      part = FindControl(mouse, win, &control);
+      if (control == console_v_scrollbar)
+	{
+	  switch (part)
+	    {
+	    case inThumb:
+	      value = GetCtlValue (control);
+	      part = TrackControl (control, mouse, nil);
+	      if (part)
+		{
+		  value -= GetCtlValue (control);
+		  if (value)
+		    TEScroll(0, value * (*console_text)->lineHeight,
+			     console_text);
+		}
+	      break;
+	    default:
+#if 0 /* don't deal with right now */
+#if 1 /* universal headers */
+	      value = TrackControl (control, mouse, (ControlActionUPP) v_scroll_proc);
+#else
+	      value = TrackControl (control, mouse, (ProcPtr) v_scroll_proc);
+#endif
+#endif
+	      break;
+	    }
+	}
+      else
+	{
+	  TEClick (mouse, 0, console_text);
+	}
+    }
+}
+
+scroll_text (hlines, vlines)
+int hlines, vlines;
+{
+}
+
+activate_window (win, activate)
+WindowPtr win;
+int activate;
+{
+  Rect grow_rect;
+
+  if (win == nil) return;
+  /* It's convenient to make the activated window also be the
+     current GrafPort. */
+  if (activate)
+    SetPort(win);
+  /* Activate the console window's scrollbar. */
+  if (win == console_window)
+    {
+      if (activate)
+	{
+	  TEActivate (console_text);
+	  /* Cause the grow icon to be redrawn at the next update. */
+	  grow_rect = console_window->portRect;
+	  grow_rect.top = grow_rect.bottom - sbarwid;
+	  grow_rect.left = grow_rect.right - sbarwid;
+	  InvalRect (&grow_rect);
+	}
+      else
+	{
+	  TEDeactivate (console_text);
+	  DrawGrowIcon (console_window);
+	}
+      HiliteControl (console_v_scrollbar, (activate ? 0 : 255));
+    }
+}
+
+update_window (win)
+WindowPtr win;
+{
+  int controls = 1, growbox = 0;
+  GrafPtr oldport;
+
+  /* Set the updating window to be the current grafport. */
+  GetPort (&oldport);
+  SetPort (win);
+/*  recalc_depths();  */
+  BeginUpdate (win);
+  if (win == console_window)
+    {
+      draw_console ();
+      controls = 1;
+      growbox = 1;
+    }
+  if (controls)
+    UpdateControls (win, win->visRgn);
+  if (growbox)
+    DrawGrowIcon (win);
+  EndUpdate (win);
+  SetPort (oldport);
+}
+
+adjust_menus ()
+{
+}
+
+do_menu_command (which)
+long which;
+{
+  short menuid, menuitem;
+  short itemHit;
+  Str255 daname;
+  short daRefNum;
+  Boolean handledbyda;
+  WindowPtr win;
+  short ditem;
+  int i;
+  char cmdbuf[300];
+
+  cmdbuf[0] = '\0';
+  menuid = HiWord (which);
+  menuitem = LoWord (which);
+  switch (menuid)
+    {
+    case mApple:
+      switch (menuitem)
+	{
+	case miAbout:
+	  Alert (128, nil);
+	  break;
+#if 0
+	case miHelp:
+	  /* (should pop up help info) */
+	  break;
+#endif
+	default:
+	  GetItem (GetMHandle (mApple), menuitem, daname);
+	  daRefNum = OpenDeskAcc (daname);
+	}
+      break;
+    case mFile:
+      switch (menuitem)
+	{
+	case miFileNew:
+	  if (console_window == FrontWindow ())
+	    {
+	      close_window (console_window);
+	    }
+	  new_console_window ();
+	  break;
+	case miFileOpen:
+	  SysBeep (20);
+	  break;
+	case miFileQuit:
+	  ExitToShell ();
+	  break;
+	}
+      break;
+    case mEdit:
+      /* handledbyda = SystemEdit(menuitem-1); */
+      switch (menuitem)
+	{
+	case miEditCut:
+	  TECut (console_text);
+	  break;
+	case miEditCopy:
+	  TECopy (console_text);
+	  break;
+	case miEditPaste:
+	  TEPaste (console_text);
+	  break;
+	case miEditClear:
+	  TEDelete (console_text);
+	  break;
+	}
+      /* All of these operations need the same postprocessing. */
+      adjust_console_sizes ();
+      adjust_console_scrollbars ();
+      adjust_console_text ();
+      break;
+    case mDebug:
+      switch (menuitem)
+	{
+	case miDebugTarget:
+	  sprintf (cmdbuf, "target %s", "remote");
+	  break;
+	case miDebugRun:
+	  sprintf (cmdbuf, "run");
+	  break;
+	case miDebugContinue:
+	  sprintf (cmdbuf, "continue");
+	  break;
+	case miDebugStep:
+	  sprintf (cmdbuf, "step");
+	  break;
+	case miDebugNext:
+	  sprintf (cmdbuf, "next");
+	  break;
+	}
+      break;
+    }
+  HiliteMenu (0);
+  /* Execute a command if one had been given.  Do here because a command
+     may longjmp before we get a chance to unhilite the menu. */
+  if (strlen (cmdbuf) > 0)
+    execute_command (cmdbuf, 0);
+}
+
+char commandbuf[1000];
+
+do_keyboard_command (key)
+int key;
+{
+  int startpos, endpos, i, len;
+  char *last_newline;
+  char buf[10], *text_str, *command, *cmd_start;
+  CharsHandle text;
+
+  if (key == '\015' || key == '\003')
+    {
+      text = TEGetText (console_text);
+      HLock ((Handle) text);
+      text_str = *text;
+      startpos = (*console_text)->selStart;
+      endpos = (*console_text)->selEnd;
+      if (startpos != endpos)
+	{
+	  len = endpos - startpos;
+	  cmd_start = text_str + startpos;
+	}
+      else
+	{
+	  for (i = startpos - 1; i >= 0; --i)
+	    if (text_str[i] == '\015')
+	      break;
+	  last_newline = text_str + i;
+	  len = (text_str + startpos) - 1 - last_newline;
+	  cmd_start = last_newline + 1;
+	}
+      if (len > 1000) len = 999;
+      if (len < 0) len = 0;
+      strncpy (commandbuf + 1, cmd_start, len);
+      commandbuf[1 + len] = 0;
+      command = commandbuf + 1;
+      HUnlock ((Handle) text);
+      commandbuf[0] = strlen(command);
+
+      /* Insert a newline and recalculate before doing any command. */
+      key = '\015';
+      TEKey (key, console_text);
+      TEInsert (buf, 1, console_text);
+      adjust_console_sizes ();
+      adjust_console_scrollbars ();
+      adjust_console_text ();
+
+      if (strlen (command) > 0)
+	{
+	  execute_command (command, 0);
+	  bpstat_do_actions (&stop_bpstat);
+	}
+    }
+  else
+    {
+      /* A self-inserting character.  This includes delete.  */
+      TEKey (key, console_text);
+    }
+}
+
+/* Draw all graphical stuff in the console window.  */
+
+draw_console ()
+{
+  SetPort (console_window);
+  TEUpdate (&(console_window->portRect), console_text);
+}
+
+/* Cause an update of a given window's entire contents.  */
+
+force_update (win)
+WindowPtr win;
+{
+  GrafPtr oldport;
+
+  if (win == nil) return;
+  GetPort (&oldport);
+  SetPort (win);
+  EraseRect (&win->portRect);
+  InvalRect (&win->portRect);
+  SetPort (oldport);
+}
+
+adjust_console_sizes ()
+{
+  Rect tmprect;
+
+  tmprect = console_window->portRect;
+  /* Move and size the scrollbar. */
+  MoveControl (console_v_scrollbar, tmprect.right - sbarwid, 0);
+  SizeControl (console_v_scrollbar, sbarwid + 1, tmprect.bottom - sbarwid + 1);
+  /* Move and size the text. */
+  tmprect.left += 7;
+  tmprect.right -= sbarwid;
+  tmprect.bottom -= sbarwid;
+  InsetRect(&tmprect, 1, 1);
+  (*console_text)->destRect = tmprect;
+  /* Fiddle bottom of viewrect to be even multiple of text lines. */
+  tmprect.bottom = tmprect.top
+    + ((tmprect.bottom - tmprect.top) / (*console_text)->lineHeight)
+      * (*console_text)->lineHeight;
+  (*console_text)->viewRect = tmprect;
+}
+
+adjust_console_scrollbars ()
+{
+  int lines, newmax, value;
+
+  (*console_v_scrollbar)->contrlVis = 0;
+  lines = (*console_text)->nLines;
+  newmax = lines - (((*console_text)->viewRect.bottom
+		     - (*console_text)->viewRect.top)
+		    / (*console_text)->lineHeight);
+  if (newmax < 0) newmax = 0;
+  SetCtlMax (console_v_scrollbar, newmax);
+  value = ((*console_text)->viewRect.top - (*console_text)->destRect.top)
+    / (*console_text)->lineHeight;
+  SetCtlValue (console_v_scrollbar, value);
+  (*console_v_scrollbar)->contrlVis = 0xff;
+  ShowControl (console_v_scrollbar);
+}
+
+/* Scroll the TE record so that it is consistent with the scrollbar(s). */
+
+adjust_console_text ()
+{
+  TEScroll (((*console_text)->viewRect.left
+	     - (*console_text)->destRect.left)
+	    - 0 /* get h scroll value */,
+	    ((((*console_text)->viewRect.top - (*console_text)->destRect.top)
+	      / (*console_text)->lineHeight)
+	     - GetCtlValue (console_v_scrollbar))
+	    * (*console_text)->lineHeight,
+	    console_text);
+}
+
+/* Readline substitute. */
+
+char *
+readline (char *prrompt)
+{
+  return gdb_readline (prrompt);
+}
+
+char *rl_completer_word_break_characters;
+
+char *rl_completer_quote_characters;
+
+int (*rl_completion_entry_function) ();
+
+int rl_point;
+
+char *rl_line_buffer;
+
+char *rl_readline_name;
+
+/* History substitute. */
+
+void
+add_history (char *buf)
+{
+}
+
+void
+stifle_history (int n)
+{
+}
+
+int
+unstifle_history ()
+{
+}
+
+int
+read_history (char *name)
+{
+}
+
+int
+write_history (char *name)
+{
+}
+
+int
+history_expand (char *x, char **y)
+{
+}
+
+extern HIST_ENTRY *
+history_get (int xxx)
+{
+  return NULL;
+}
+
+int history_base;
+
+char *
+filename_completion_function (char *text, char *name)
+{
+  return "?";
+}
+
+char *
+tilde_expand (char *str)
+{
+  return strsave (str);
+}
+
+/* Modified versions of standard I/O. */
+
+#undef fprintf
+
+int
+hacked_fprintf (FILE *fp, const char *fmt, ...)
+{
+  int ret;
+  va_list ap;
+
+  va_start (ap, fmt);
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      char buf[1000];
+
+      ret = vsprintf(buf, fmt, ap);
+      TEInsert (buf, strlen(buf), console_text);
+    }
+  else
+    ret = vfprintf (fp, fmt, ap);
+  va_end (ap);
+  return ret;
+}
+
+#undef printf
+
+int
+hacked_printf (const char *fmt, ...)
+{
+  int ret;
+  va_list ap;
+
+  va_start (ap, fmt);
+  ret = hacked_vfprintf(stdout, fmt, ap);
+  va_end (ap);
+  return ret;
+}
+
+#undef vfprintf
+
+int 
+hacked_vfprintf (FILE *fp, const char *format, va_list args)
+{
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      char buf[1000];
+      int ret;
+
+      ret = vsprintf(buf, format, args);
+      TEInsert (buf, strlen(buf), console_text);
+      if (strchr(buf, '\n'))
+	{
+	  adjust_console_sizes ();
+	  adjust_console_scrollbars ();
+	  adjust_console_text ();
+	}
+      return ret;
+    }
+  else
+    return vfprintf (fp, format, args);
+}
+
+#undef fputs
+
+hacked_fputs (const char *s, FILE *fp)
+{
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      TEInsert (s, strlen(s), console_text);
+      if (strchr(s, '\n'))
+	{
+	  adjust_console_sizes ();
+	  adjust_console_scrollbars ();
+	  adjust_console_text ();
+	}
+      return 0;
+    }
+  else
+    return fputs (s, fp);
+}
+
+#undef fputc
+
+hacked_fputc (const char c, FILE *fp)
+{
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      char buf[1];
+
+      buf[0] = c;
+      TEInsert (buf, 1, console_text);
+      if (c == '\n')
+	{
+	  adjust_console_sizes ();
+	  adjust_console_scrollbars ();
+	  adjust_console_text ();
+	}
+      return c;
+    }
+  else
+    return fputc (c, fp);
+}
+
+#undef putc
+
+hacked_putc (const char c, FILE *fp)
+{
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      char buf[1];
+
+      buf[0] = c;
+      TEInsert (buf, 1, console_text);
+      if (c == '\n')
+	{
+	  adjust_console_sizes ();
+	  adjust_console_scrollbars ();
+	  adjust_console_text ();
+	}
+      return c;
+    }
+  else
+    return fputc (c, fp);
+}
+
+#undef fflush
+
+hacked_fflush (FILE *fp)
+{
+  if (mac_app && (fp == stdout || fp == stderr))
+    {
+      adjust_console_sizes ();
+      adjust_console_scrollbars ();
+      adjust_console_text ();
+      return 0;
+    }
+  return fflush (fp);
+}
+
+#undef fgetc
+
+hacked_fgetc (FILE *fp)
+{
+  if (mac_app && (fp == stdin))
+    {
+      /* Catch any attempts to use this.  */
+      DebugStr("\pShould not be reading from stdin!");
+      return '\n';
+    }
+  return fgetc (fp);
+}
diff --git a/gdb/main.c b/gdb/main.c
new file mode 100644
index 0000000..18c2445
--- /dev/null
+++ b/gdb/main.c
@@ -0,0 +1,780 @@
+/* Top level stuff for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <setjmp.h>
+#include "top.h"
+#include "target.h"
+#include "inferior.h"
+#include "call-cmds.h"
+
+#include "getopt.h"
+
+#include <sys/types.h>
+#include "gdb_stat.h"
+#include <ctype.h>
+
+#include "gdb_string.h"
+
+/* Temporary variable for SET_TOP_LEVEL.  */
+
+static int top_level_val;
+
+/* Do a setjmp on error_return and quit_return.  catch_errors is
+   generally a cleaner way to do this, but main() would look pretty
+   ugly if it had to use catch_errors each time.  */
+
+#define SET_TOP_LEVEL() \
+  (((top_level_val = SIGSETJMP (error_return)) \
+    ? (PTR) 0 : (PTR) memcpy (quit_return, error_return, sizeof (SIGJMP_BUF))) \
+   , top_level_val)
+
+/* If nonzero, display time usage both at startup and for each command.  */
+
+int display_time;
+
+/* If nonzero, display space usage both at startup and for each command.  */
+
+int display_space;
+
+/* Whether this is the command line version or not */
+int tui_version = 0;
+
+/* Whether xdb commands will be handled */
+int xdb_commands = 0;
+
+/* Whether dbx commands will be handled */
+int dbx_commands = 0;
+
+GDB_FILE *gdb_stdout;
+GDB_FILE *gdb_stderr;
+
+/* Whether to enable writing into executable and core files */
+extern int write_files;
+
+static void print_gdb_help PARAMS ((GDB_FILE *));
+extern void gdb_init PARAMS ((char *));
+
+/* These two are used to set the external editor commands when gdb is farming
+   out files to be edited by another program. */
+
+extern int enable_external_editor;
+extern char * external_editor_command;
+
+#ifdef __CYGWIN__
+#include <windows.h> /* for MAX_PATH */
+#include <sys/cygwin.h> /* for cygwin32_conv_to_posix_path */
+#endif
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int count;
+  static int quiet = 0;
+  static int batch = 0;
+
+  /* Pointers to various arguments from command line.  */
+  char *symarg = NULL;
+  char *execarg = NULL;
+  char *corearg = NULL;
+  char *cdarg = NULL;
+  char *ttyarg = NULL;
+
+  /* These are static so that we can take their address in an initializer.  */
+  static int print_help;
+  static int print_version;
+
+  /* Pointers to all arguments of --command option.  */
+  char **cmdarg;
+  /* Allocated size of cmdarg.  */
+  int cmdsize;
+  /* Number of elements of cmdarg used.  */
+  int ncmd;
+
+  /* Indices of all arguments of --directory option.  */
+  char **dirarg;
+  /* Allocated size.  */
+  int dirsize;
+  /* Number of elements used.  */
+  int ndir;
+  
+  struct stat homebuf, cwdbuf;
+  char *homedir, *homeinit;
+
+  register int i;
+
+  long time_at_startup = get_run_time ();
+
+  int gdb_file_size;
+
+  START_PROGRESS (argv[0], 0);
+
+#ifdef MPW
+  /* Do all Mac-specific setup. */
+  mac_init ();
+#endif /* MPW */
+
+  /* This needs to happen before the first use of malloc.  */
+  init_malloc ((PTR) NULL);
+
+#if defined (ALIGN_STACK_ON_STARTUP)
+  i = (int) &count & 0x3;
+  if (i != 0)
+    alloca (4 - i);
+#endif
+
+  /* If error() is called from initialization code, just exit */
+  if (SET_TOP_LEVEL ()) {
+    exit(1);
+  }
+
+  cmdsize = 1;
+  cmdarg = (char **) xmalloc (cmdsize * sizeof (*cmdarg));
+  ncmd = 0;
+  dirsize = 1;
+  dirarg = (char **) xmalloc (dirsize * sizeof (*dirarg));
+  ndir = 0;
+
+  quit_flag = 0;
+  line = (char *) xmalloc (linesize);
+  line[0] = '\0';		/* Terminate saved (now empty) cmd line */
+  instream = stdin;
+
+  getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+  current_directory = gdb_dirbuf;
+
+  gdb_file_size = sizeof(GDB_FILE);
+
+  gdb_stdout = (GDB_FILE *)xmalloc (gdb_file_size);
+  gdb_stdout->ts_streamtype = afile;
+  gdb_stdout->ts_filestream = stdout;
+  gdb_stdout->ts_strbuf = NULL;
+  gdb_stdout->ts_buflen = 0;
+
+  gdb_stderr = (GDB_FILE *)xmalloc (gdb_file_size);
+  gdb_stderr->ts_streamtype = afile;
+  gdb_stderr->ts_filestream = stderr;
+  gdb_stderr->ts_strbuf = NULL;
+  gdb_stderr->ts_buflen = 0;
+
+  /* Parse arguments and options.  */
+  {
+    int c;
+    /* When var field is 0, use flag field to record the equivalent
+       short option (or arbitrary numbers starting at 10 for those
+       with no equivalent).  */
+    static struct option long_options[] =
+      {
+#if defined(TUI)
+	{"tui", no_argument, &tui_version, 1},
+#endif
+	{"xdb", no_argument, &xdb_commands, 1},
+	{"dbx", no_argument, &dbx_commands, 1},
+	{"readnow", no_argument, &readnow_symbol_files, 1},
+	{"r", no_argument, &readnow_symbol_files, 1},
+	{"mapped", no_argument, &mapped_symbol_files, 1},
+	{"m", no_argument, &mapped_symbol_files, 1},
+	{"quiet", no_argument, &quiet, 1},
+	{"q", no_argument, &quiet, 1},
+	{"silent", no_argument, &quiet, 1},
+	{"nx", no_argument, &inhibit_gdbinit, 1},
+	{"n", no_argument, &inhibit_gdbinit, 1},
+	{"batch", no_argument, &batch, 1},
+	{"epoch", no_argument, &epoch_interface, 1},
+
+	/* This is a synonym for "--annotate=1".  --annotate is now preferred,
+	   but keep this here for a long time because people will be running
+	   emacses which use --fullname.  */
+	{"fullname", no_argument, 0, 'f'},
+	{"f", no_argument, 0, 'f'},
+
+	{"annotate", required_argument, 0, 12},
+	{"help", no_argument, &print_help, 1},
+	{"se", required_argument, 0, 10},
+	{"symbols", required_argument, 0, 's'},
+	{"s", required_argument, 0, 's'},
+	{"exec", required_argument, 0, 'e'},
+	{"e", required_argument, 0, 'e'},
+	{"core", required_argument, 0, 'c'},
+	{"c", required_argument, 0, 'c'},
+	{"command", required_argument, 0, 'x'},
+	{"version", no_argument, &print_version, 1},
+	{"x", required_argument, 0, 'x'},
+	{"directory", required_argument, 0, 'd'},
+	{"cd", required_argument, 0, 11},
+	{"tty", required_argument, 0, 't'},
+	{"baud", required_argument, 0, 'b'},
+	{"b", required_argument, 0, 'b'},
+	{"nw", no_argument, &use_windows, 0},
+	{"nowindows", no_argument, &use_windows, 0},
+	{"w", no_argument, &use_windows, 1},
+	{"windows", no_argument, &use_windows, 1},
+	{"statistics", no_argument, 0, 13},
+	{"write", no_argument, &write_files, 1},
+/* Allow machine descriptions to add more options... */
+#ifdef ADDITIONAL_OPTIONS
+	ADDITIONAL_OPTIONS
+#endif
+	{0, no_argument, 0, 0}
+      };
+
+    while (1)
+      {
+	int option_index;
+
+	c = getopt_long_only (argc, argv, "",
+			      long_options, &option_index);
+	if (c == EOF)
+	  break;
+
+	/* Long option that takes an argument.  */
+	if (c == 0 && long_options[option_index].flag == 0)
+	  c = long_options[option_index].val;
+
+	switch (c)
+	  {
+	  case 0:
+	    /* Long option that just sets a flag.  */
+	    break;
+	  case 10:
+	    symarg = optarg;
+	    execarg = optarg;
+	    break;
+	  case 11:
+	    cdarg = optarg;
+	    break;
+	  case 12:
+	    /* FIXME: what if the syntax is wrong (e.g. not digits)?  */
+	    annotation_level = atoi (optarg);
+	    break;
+	  case 13:
+	    /* Enable the display of both time and space usage.  */
+	    display_time = 1;
+	    display_space = 1;
+	    break;
+	  case 'f':
+	    annotation_level = 1;
+/* We have probably been invoked from emacs.  Disable window interface.  */
+	    use_windows = 0;
+	    break;
+	  case 's':
+	    symarg = optarg;
+	    break;
+	  case 'e':
+	    execarg = optarg;
+	    break;
+	  case 'c':
+	    corearg = optarg;
+	    break;
+	  case 'x':
+	    cmdarg[ncmd++] = optarg;
+	    if (ncmd >= cmdsize)
+	      {
+		cmdsize *= 2;
+		cmdarg = (char **) xrealloc ((char *)cmdarg,
+					     cmdsize * sizeof (*cmdarg));
+	      }
+	    break;
+	  case 'd':
+	    dirarg[ndir++] = optarg;
+	    if (ndir >= dirsize)
+	      {
+		dirsize *= 2;
+		dirarg = (char **) xrealloc ((char *)dirarg,
+					     dirsize * sizeof (*dirarg));
+	      }
+	    break;
+	  case 't':
+	    ttyarg = optarg;
+	    break;
+	  case 'q':
+	    quiet = 1;
+	    break;
+	  case 'b':
+	    {
+	      int i;
+	      char *p;
+
+	      i = strtol (optarg, &p, 0);
+	      if (i == 0 && p == optarg)
+
+		/* Don't use *_filtered or warning() (which relies on
+                   current_target) until after initialize_all_files(). */
+
+		fprintf_unfiltered
+		  (gdb_stderr,
+		   "warning: could not set baud rate to `%s'.\n", optarg);
+	      else
+		baud_rate = i;
+	    }
+	  case 'l':
+	    {
+	      int i;
+	      char *p;
+
+	      i = strtol (optarg, &p, 0);
+	      if (i == 0 && p == optarg)
+
+		/* Don't use *_filtered or warning() (which relies on
+                   current_target) until after initialize_all_files(). */
+
+		fprintf_unfiltered
+		  (gdb_stderr,
+		   "warning: could not set timeout limit to `%s'.\n", optarg);
+	      else
+		remote_timeout = i;
+	    }
+	    break;
+
+#ifdef ADDITIONAL_OPTION_CASES
+	  ADDITIONAL_OPTION_CASES
+#endif
+	  case '?':
+	    fprintf_unfiltered (gdb_stderr,
+		     "Use `%s --help' for a complete list of options.\n",
+		     argv[0]);
+	    exit (1);
+	  }
+      }
+
+    /* If --help or --version, disable window interface.  */
+    if (print_help || print_version)
+      {
+	use_windows = 0;
+#ifdef TUI
+	/* Disable the TUI as well.  */
+	tui_version = 0;
+#endif
+      }
+
+#ifdef TUI
+    /* An explicit --tui flag overrides the default UI, which is the
+       window system.  */
+    if (tui_version)
+      use_windows = 0;
+#endif      
+
+    /* OK, that's all the options.  The other arguments are filenames.  */
+    count = 0;
+    for (; optind < argc; optind++)
+      switch (++count)
+	{
+	case 1:
+	  symarg = argv[optind];
+	  execarg = argv[optind];
+	  break;
+	case 2:
+	  corearg = argv[optind];
+	  break;
+	case 3:
+	  fprintf_unfiltered (gdb_stderr,
+		   "Excess command line arguments ignored. (%s%s)\n",
+		   argv[optind], (optind == argc - 1) ? "" : " ...");
+	  break;
+	}
+    if (batch)
+      quiet = 1;
+  }
+
+#if defined(TUI)
+  if (tui_version)
+    init_ui_hook = tuiInit;
+#endif
+  gdb_init (argv[0]);
+
+  /* Do these (and anything which might call wrap_here or *_filtered)
+     after initialize_all_files.  */
+  if (print_version)
+    {
+      print_gdb_version (gdb_stdout);
+      wrap_here ("");
+      printf_filtered ("\n");
+      exit (0);
+    }
+
+  if (print_help)
+    {
+      print_gdb_help (gdb_stdout);
+      fputs_unfiltered ("\n", gdb_stdout);
+      exit (0);
+    }
+
+  if (!quiet)
+    {
+      /* Print all the junk at the top, with trailing "..." if we are about
+	 to read a symbol file (possibly slowly).  */
+      print_gdb_version (gdb_stdout);
+      if (symarg)
+	printf_filtered ("..");
+      wrap_here("");
+      gdb_flush (gdb_stdout);		/* Force to screen during slow operations */
+    }
+
+  error_pre_print = "\n\n";
+  quit_pre_print = error_pre_print;
+
+  /* We may get more than one warning, don't double space all of them... */
+  warning_pre_print = "\nwarning: ";
+
+  /* Read and execute $HOME/.gdbinit file, if it exists.  This is done
+     *before* all the command line arguments are processed; it sets
+     global parameters, which are independent of what file you are
+     debugging or what directory you are in.  */
+#ifdef __CYGWIN32__
+  {
+    char * tmp = getenv ("HOME");
+    
+    if (tmp != NULL)
+      {
+        homedir = (char *) alloca (MAX_PATH+1);
+        cygwin32_conv_to_posix_path (tmp, homedir);
+      }
+    else
+      homedir = NULL;
+  }
+#else
+  homedir = getenv ("HOME");  
+#endif
+  if (homedir)
+    {
+      homeinit = (char *) alloca (strlen (homedir) +
+				  strlen (gdbinit) + 10);
+      strcpy (homeinit, homedir);
+      strcat (homeinit, "/");
+      strcat (homeinit, gdbinit);
+
+      if (!inhibit_gdbinit)
+	{
+	  if (!SET_TOP_LEVEL ())
+	    source_command (homeinit, 0);
+	}
+      do_cleanups (ALL_CLEANUPS);
+
+      /* Do stats; no need to do them elsewhere since we'll only
+	 need them if homedir is set.  Make sure that they are
+	 zero in case one of them fails (this guarantees that they
+	 won't match if either exists).  */
+      
+      memset (&homebuf, 0, sizeof (struct stat));
+      memset (&cwdbuf, 0, sizeof (struct stat));
+      
+      stat (homeinit, &homebuf);
+      stat (gdbinit, &cwdbuf); /* We'll only need this if
+				       homedir was set.  */
+    }
+
+  /* Now perform all the actions indicated by the arguments.  */
+  if (cdarg != NULL)
+    {
+      if (!SET_TOP_LEVEL ())
+	{
+	  cd_command (cdarg, 0);
+	}
+    }
+  do_cleanups (ALL_CLEANUPS);
+
+  for (i = 0; i < ndir; i++)
+    if (!SET_TOP_LEVEL ())
+      directory_command (dirarg[i], 0);
+  free ((PTR)dirarg);
+  do_cleanups (ALL_CLEANUPS);
+
+  if (execarg != NULL
+      && symarg != NULL
+      && STREQ (execarg, symarg))
+    {
+      /* The exec file and the symbol-file are the same.  If we can't open
+	 it, better only print one error message.  */
+      if (!SET_TOP_LEVEL ())
+	{
+	  exec_file_command (execarg, !batch);
+	  symbol_file_command (symarg, 0);
+	}
+    }
+  else
+    {
+      if (execarg != NULL)
+	if (!SET_TOP_LEVEL ())
+	  exec_file_command (execarg, !batch);
+      if (symarg != NULL)
+	if (!SET_TOP_LEVEL ())
+	  symbol_file_command (symarg, 0);
+    }
+  do_cleanups (ALL_CLEANUPS);
+
+  /* After the symbol file has been read, print a newline to get us
+     beyond the copyright line...  But errors should still set off
+     the error message with a (single) blank line.  */
+  if (!quiet)
+    printf_filtered ("\n");
+  error_pre_print = "\n";
+  quit_pre_print = error_pre_print;
+  warning_pre_print = "\nwarning: ";
+
+  if (corearg != NULL)
+    {
+      if (!SET_TOP_LEVEL ())
+	core_file_command (corearg, !batch);
+      else if (isdigit (corearg[0]) && !SET_TOP_LEVEL ())
+	attach_command (corearg, !batch);
+    }
+  do_cleanups (ALL_CLEANUPS);
+
+  if (ttyarg != NULL)
+    if (!SET_TOP_LEVEL ())
+      tty_command (ttyarg, !batch);
+  do_cleanups (ALL_CLEANUPS);
+
+#ifdef ADDITIONAL_OPTION_HANDLER
+  ADDITIONAL_OPTION_HANDLER;
+#endif
+
+  /* Error messages should no longer be distinguished with extra output. */
+  error_pre_print = NULL;
+  quit_pre_print = NULL;
+  warning_pre_print = "warning: ";
+
+  /* Read the .gdbinit file in the current directory, *if* it isn't
+     the same as the $HOME/.gdbinit file (it should exist, also).  */
+  
+  if (!homedir
+      || memcmp ((char *) &homebuf, (char *) &cwdbuf, sizeof (struct stat)))
+    if (!inhibit_gdbinit)
+      {
+	if (!SET_TOP_LEVEL ())
+	  source_command (gdbinit, 0);
+      }
+  do_cleanups (ALL_CLEANUPS);
+
+  for (i = 0; i < ncmd; i++)
+    {
+      if (!SET_TOP_LEVEL ())
+	{
+	  if (cmdarg[i][0] == '-' && cmdarg[i][1] == '\0')
+	    read_command_file (stdin);
+	  else
+	    source_command (cmdarg[i], !batch);
+	  do_cleanups (ALL_CLEANUPS);
+	}
+    }
+  free ((PTR)cmdarg);
+
+  /* Read in the old history after all the command files have been read. */
+  init_history();
+
+  if (batch)
+    {
+      /* We have hit the end of the batch file.  */
+      exit (0);
+    }
+
+  /* Do any host- or target-specific hacks.  This is used for i960 targets
+     to force the user to set a nindy target and spec its parameters.  */
+
+#ifdef BEFORE_MAIN_LOOP_HOOK
+  BEFORE_MAIN_LOOP_HOOK;
+#endif
+
+  END_PROGRESS (argv[0]);
+
+  /* Show time and/or space usage.  */
+
+  if (display_time)
+    {
+      long init_time = get_run_time () - time_at_startup;
+
+      printf_unfiltered ("Startup time: %ld.%06ld\n",
+			 init_time / 1000000, init_time % 1000000);
+    }
+
+  if (display_space)
+    {
+#ifdef HAVE_SBRK
+      extern char **environ;
+      char *lim = (char *) sbrk (0);
+
+      printf_unfiltered ("Startup size: data size %ld\n",
+			 (long) (lim - (char *) &environ));
+#endif
+    }
+
+  /* The default command loop. 
+     The WIN32 Gui calls this main to set up gdb's state, and 
+     has its own command loop. */
+#if !defined _WIN32 || defined __GNUC__
+  while (1)
+    {
+      if (!SET_TOP_LEVEL ())
+	{
+	  do_cleanups (ALL_CLEANUPS);		/* Do complete cleanup */
+	  /* GUIs generally have their own command loop, mainloop, or whatever.
+	     This is a good place to gain control because many error
+	     conditions will end up here via longjmp(). */
+	  if (command_loop_hook)
+	    command_loop_hook ();
+	  else
+	    command_loop ();
+          quit_command ((char *)0, instream == stdin);
+	}
+    }
+
+  /* No exit -- exit is through quit_command.  */
+#endif
+
+}
+
+/* Don't use *_filtered for printing help.  We don't want to prompt
+   for continue no matter how small the screen or how much we're going
+   to print.  */
+
+static void
+print_gdb_help (stream)
+  GDB_FILE *stream;
+{
+      fputs_unfiltered ("\
+This is the GNU debugger.  Usage:\n\n\
+    gdb [options] [executable-file [core-file or process-id]]\n\n\
+Options:\n\n\
+", stream);
+      fputs_unfiltered ("\
+  -b BAUDRATE        Set serial port baud rate used for remote debugging.\n\
+  --batch            Exit after processing options.\n\
+  --cd=DIR           Change current directory to DIR.\n\
+  --command=FILE     Execute GDB commands from FILE.\n\
+  --core=COREFILE    Analyze the core dump COREFILE.\n\
+", stream);
+      fputs_unfiltered ("\
+  --dbx              DBX compatibility mode.\n\
+  --directory=DIR    Search for source files in DIR.\n\
+  --epoch            Output information used by epoch emacs-GDB interface.\n\
+  --exec=EXECFILE    Use EXECFILE as the executable.\n\
+  --fullname         Output information used by emacs-GDB interface.\n\
+  --help             Print this message.\n\
+", stream);
+      fputs_unfiltered ("\
+  --mapped           Use mapped symbol files if supported on this system.\n\
+  --nw		     Do not use a window interface.\n\
+  --nx               Do not read .gdbinit file.\n\
+  --quiet            Do not print version number on startup.\n\
+  --readnow          Fully read symbol files on first access.\n\
+", stream);
+      fputs_unfiltered ("\
+  --se=FILE          Use FILE as symbol file and executable file.\n\
+  --symbols=SYMFILE  Read symbols from SYMFILE.\n\
+  --tty=TTY          Use TTY for input/output by the program being debugged.\n\
+", stream);
+#if defined(TUI)
+      fputs_unfiltered ("\
+  --tui              Use a terminal user interface.\n\
+", stream);
+#endif
+      fputs_unfiltered ("\
+  --version          Print version information and then exit.\n\
+  -w                 Use a window interface.\n\
+  --write            Set writing into executable and core files.\n\
+  --xdb              XDB compatibility mode.\n\
+", stream);
+#ifdef ADDITIONAL_OPTION_HELP
+      fputs_unfiltered (ADDITIONAL_OPTION_HELP, stream);
+#endif
+      fputs_unfiltered ("\n\
+For more information, type \"help\" from within GDB, or consult the\n\
+GDB manual (available as on-line info or a printed manual).\n\
+Report bugs to \"bug-gdb@prep.ai.mit.edu\".\
+", stream);
+}
+
+
+void
+init_proc ()
+{
+}
+
+void
+proc_remove_foreign (pid)
+     int pid;
+{
+}
+
+/* All I/O sent to the *_filtered and *_unfiltered functions eventually ends up
+   here.  The fputs_unfiltered_hook is primarily used by GUIs to collect all
+   output and send it to the GUI, instead of the controlling terminal.  Only
+   output to gdb_stdout and gdb_stderr are sent to the hook.  Everything else
+   is sent on to fputs to allow file I/O to be handled appropriately.  */
+
+void
+fputs_unfiltered (linebuffer, stream)
+     const char *linebuffer;
+     GDB_FILE *stream;
+{
+#if defined(TUI)
+  extern int tui_owns_terminal;
+#endif
+  /* If anything (GUI, TUI) wants to capture GDB output, this is
+   * the place... the way to do it is to set up 
+   * fputs_unfiltered_hook.
+   * Our TUI ("gdb -tui") used to hook output, but in the
+   * new (XDB style) scheme, we do not do that anymore... - RT
+   */
+  if (fputs_unfiltered_hook
+      && (stream == gdb_stdout
+	  || stream == gdb_stderr))
+    fputs_unfiltered_hook (linebuffer, stream);
+  else
+    {
+#if defined(TUI)
+      if (tui_version && tui_owns_terminal) {
+	/* If we get here somehow while updating the TUI (from
+	 * within a tuiDo(), then we need to temporarily 
+	 * set up the terminal for GDB output. This probably just
+	 * happens on error output.
+	 */
+
+        if (stream->ts_streamtype == astring) {
+           gdb_file_adjust_strbuf(strlen(linebuffer), stream);
+           strcat(stream->ts_strbuf, linebuffer);
+        } else {
+           tuiTermUnsetup(0, (tui_version) ? cmdWin->detail.commandInfo.curch : 0);
+           fputs (linebuffer, stream->ts_filestream);
+           tuiTermSetup(0);
+           if (linebuffer[strlen(linebuffer) - 1] == '\n')
+              tuiClearCommandCharCount();
+           else
+              tuiIncrCommandCharCountBy(strlen(linebuffer));
+        }
+      } else {
+        /* The normal case - just do a fputs() */
+        if (stream->ts_streamtype == astring) {
+           gdb_file_adjust_strbuf(strlen(linebuffer), stream);
+           strcat(stream->ts_strbuf, linebuffer);
+        } else fputs (linebuffer, stream->ts_filestream);
+      }
+ 
+
+#else
+      if (stream->ts_streamtype == astring) {
+           gdb_file_adjust_strbuf(strlen(linebuffer), stream);
+           strcat(stream->ts_strbuf, linebuffer);
+        } else fputs (linebuffer, stream->ts_filestream);
+#endif
+    }
+}
diff --git a/gdb/maint.c b/gdb/maint.c
new file mode 100644
index 0000000..cf4ceb7
--- /dev/null
+++ b/gdb/maint.c
@@ -0,0 +1,449 @@
+/* Support for GDB maintenance commands.
+   Copyright 1992, 1993, 1994 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+
+#if MAINTENANCE_CMDS	/* Entire rest of file goes away if not including maint cmds */
+
+#include <ctype.h>
+#include <signal.h>
+#include "command.h"
+#include "gdbcmd.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "demangle.h"
+#include "gdbcore.h"
+#include "expression.h" /* For language.h */
+#include "language.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "value.h"
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+static void maintenance_command PARAMS ((char *, int));
+
+static void maintenance_dump_me PARAMS ((char *, int));
+
+static void maintenance_demangle PARAMS ((char *, int));
+
+static void maintenance_time_display PARAMS ((char *, int));
+
+static void maintenance_space_display PARAMS ((char *, int));
+
+static void maintenance_info_command PARAMS ((char *, int));
+
+static void print_section_table PARAMS ((bfd *, asection *, PTR));
+
+static void maintenance_info_sections PARAMS ((char *, int));
+
+static void maintenance_print_command PARAMS ((char *, int));
+
+/* Set this to the maximum number of seconds to wait instead of waiting forever
+   in target_wait().  If this timer times out, then it generates an error and
+   the command is aborted.  This replaces most of the need for timeouts in the
+   GDB test suite, and makes it possible to distinguish between a hung target
+   and one with slow communications.  */
+
+int watchdog = 0;
+
+/*
+
+LOCAL FUNCTION
+
+	maintenance_command -- access the maintenance subcommands
+
+SYNOPSIS
+
+	void maintenance_command (char *args, int from_tty)
+
+DESCRIPTION
+
+*/
+
+static void
+maintenance_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"maintenance\" must be followed by the name of a maintenance command.\n");
+  help_list (maintenancelist, "maintenance ", -1, gdb_stdout);
+}
+
+#ifndef _WIN32
+/* ARGSUSED */
+static void
+maintenance_dump_me (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (query ("Should GDB dump core? "))
+    {
+      signal (SIGQUIT, SIG_DFL);
+      kill (getpid (), SIGQUIT);
+    }
+}
+#endif
+
+/*  Someday we should allow demangling for things other than just
+    explicit strings.  For example, we might want to be able to
+    specify the address of a string in either GDB's process space
+    or the debuggee's process space, and have gdb fetch and demangle
+    that string.  If we have a char* pointer "ptr" that points to
+    a string, we might want to be able to given just the name and
+    have GDB demangle and print what it points to, etc.  (FIXME) */
+
+static void
+maintenance_demangle (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *demangled;
+
+  if (args == NULL || *args == '\0')
+    {
+      printf_unfiltered ("\"maintenance demangle\" takes an argument to demangle.\n");
+    }
+  else
+    {
+      demangled = cplus_demangle (args, DMGL_ANSI | DMGL_PARAMS);
+      if (demangled != NULL)
+	{
+	  printf_unfiltered ("%s\n", demangled);
+	  free (demangled);
+	}
+      else
+	{
+	  printf_unfiltered ("Can't demangle \"%s\"\n", args);
+	}
+    }
+}
+
+static void
+maintenance_time_display (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  extern int display_time;
+
+  if (args == NULL || *args == '\0')
+    printf_unfiltered ("\"maintenance time\" takes a numeric argument.\n");
+  else
+    display_time = strtol (args, NULL, 10);
+}
+
+static void
+maintenance_space_display (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  extern int display_space;
+
+  if (args == NULL || *args == '\0')
+    printf_unfiltered ("\"maintenance space\" takes a numeric argument.\n");
+  else
+    display_space = strtol (args, NULL, 10);
+}
+
+/* The "maintenance info" command is defined as a prefix, with allow_unknown 0.
+   Therefore, its own definition is called only for "maintenance info" with
+   no args.  */
+
+/* ARGSUSED */
+static void
+maintenance_info_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"maintenance info\" must be followed by the name of an info command.\n");
+  help_list (maintenanceinfolist, "maintenance info ", -1, gdb_stdout);
+}
+
+static void
+print_section_table (abfd, asect, ignore)
+     bfd *abfd;
+     asection *asect;
+     PTR ignore;
+{
+  flagword flags;
+
+  flags = bfd_get_section_flags (abfd, asect);
+
+  /* FIXME-32x64: Need print_address_numeric with field width.  */
+  printf_filtered ("    %s",
+		   local_hex_string_custom
+		     ((unsigned long) bfd_section_vma (abfd, asect), "08l"));
+  printf_filtered ("->%s",
+		   local_hex_string_custom
+		     ((unsigned long) (bfd_section_vma (abfd, asect)
+				       + bfd_section_size (abfd, asect)),
+		      "08l"));
+  printf_filtered (" at %s",
+		   local_hex_string_custom
+		     ((unsigned long) asect->filepos, "08l"));
+  printf_filtered (": %s", bfd_section_name (abfd, asect));
+
+  if (flags & SEC_ALLOC)
+    printf_filtered (" ALLOC");
+  if (flags & SEC_LOAD)
+    printf_filtered (" LOAD");
+  if (flags & SEC_RELOC)
+    printf_filtered (" RELOC");
+  if (flags & SEC_READONLY)
+    printf_filtered (" READONLY");
+  if (flags & SEC_CODE)
+    printf_filtered (" CODE");
+  if (flags & SEC_DATA)
+    printf_filtered (" DATA");
+  if (flags & SEC_ROM)
+    printf_filtered (" ROM");
+  if (flags & SEC_CONSTRUCTOR)
+    printf_filtered (" CONSTRUCTOR");
+  if (flags & SEC_HAS_CONTENTS)
+    printf_filtered (" HAS_CONTENTS");
+  if (flags & SEC_NEVER_LOAD)
+    printf_filtered (" NEVER_LOAD");
+  if (flags & SEC_COFF_SHARED_LIBRARY)
+    printf_filtered (" COFF_SHARED_LIBRARY");
+  if (flags & SEC_IS_COMMON)
+    printf_filtered (" IS_COMMON");
+
+  printf_filtered ("\n");
+}
+
+/* ARGSUSED */
+static void
+maintenance_info_sections (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  if (exec_bfd)
+    {
+      printf_filtered ("Exec file:\n");
+      printf_filtered ("    `%s', ", bfd_get_filename(exec_bfd));
+      wrap_here ("        ");
+      printf_filtered ("file type %s.\n", bfd_get_target(exec_bfd));
+      bfd_map_over_sections(exec_bfd, print_section_table, 0);
+    }
+
+  if (core_bfd)
+    {
+      printf_filtered ("Core file:\n");
+      printf_filtered ("    `%s', ", bfd_get_filename(core_bfd));
+      wrap_here ("        ");
+      printf_filtered ("file type %s.\n", bfd_get_target(core_bfd));
+      bfd_map_over_sections(core_bfd, print_section_table, 0);
+    }
+}
+
+/* ARGSUSED */
+void
+maintenance_print_statistics (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  print_objfile_statistics ();
+  print_symbol_bcache_statistics ();
+}
+
+/* The "maintenance print" command is defined as a prefix, with allow_unknown
+   0.  Therefore, its own definition is called only for "maintenance print"
+   with no args.  */
+
+/* ARGSUSED */
+static void
+maintenance_print_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"maintenance print\" must be followed by the name of a print command.\n");
+  help_list (maintenanceprintlist, "maintenance print ", -1, gdb_stdout);
+}
+
+/* The "maintenance translate-address" command converts a section and address
+   to a symbol.  This can be called in two ways:
+		maintenance translate-address <secname> <addr>
+	or	maintenance translate-address <addr>
+*/
+
+static void
+maintenance_translate_address (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  CORE_ADDR address;
+  asection *sect;
+  char *p;
+  struct minimal_symbol *sym;
+  struct objfile *objfile;
+
+  if (arg == NULL || *arg == 0)
+    error ("requires argument (address or section + address)");
+
+  sect = NULL;
+  p = arg;
+
+  if (!isdigit (*p))
+    {				/* See if we have a valid section name */
+      while (*p && !isspace (*p)) /* Find end of section name */
+	p++;
+      if (*p == '\000')		/* End of command? */
+	error ("Need to specify <section-name> and <address>");
+      *p++ = '\000';
+      while (isspace (*p)) p++;	/* Skip whitespace */
+
+      ALL_OBJFILES (objfile)
+	{
+	  sect = bfd_get_section_by_name (objfile->obfd, arg);
+	  if (sect != NULL)
+	    break;
+	}
+
+      if (!sect)
+	error ("Unknown section %s.", arg);
+    }
+
+  address = parse_and_eval_address (p);
+
+  if (sect)
+    sym = lookup_minimal_symbol_by_pc_section (address, sect);
+  else
+    sym = lookup_minimal_symbol_by_pc (address);
+
+  if (sym)
+    printf_filtered ("%s+%u\n", 
+		     SYMBOL_SOURCE_NAME (sym), 
+		     address - SYMBOL_VALUE_ADDRESS (sym));
+  else if (sect)
+    printf_filtered ("no symbol at %s:0x%08x\n", sect->name, address);
+  else
+    printf_filtered ("no symbol at 0x%08x\n", address);
+
+  return;
+}
+
+#endif	/* MAINTENANCE_CMDS */
+
+void
+_initialize_maint_cmds ()
+{
+#if MAINTENANCE_CMDS	/* Entire file goes away if not including maint cmds */
+  add_prefix_cmd ("maintenance", class_maintenance, maintenance_command,
+		  "Commands for use by GDB maintainers.\n\
+Includes commands to dump specific internal GDB structures in\n\
+a human readable form, to cause GDB to deliberately dump core,\n\
+to test internal functions such as the C++ demangler, etc.",
+		  &maintenancelist, "maintenance ", 0,
+		  &cmdlist);
+
+  add_com_alias ("mt", "maintenance", class_maintenance, 1);
+
+  add_prefix_cmd ("info", class_maintenance, maintenance_info_command,
+		  "Commands for showing internal info about the program being debugged.",
+		  &maintenanceinfolist, "maintenance info ", 0,
+		  &maintenancelist);
+
+  add_cmd ("sections", class_maintenance, maintenance_info_sections,
+	   "List the BFD sections of the exec and core files.",
+	   &maintenanceinfolist);
+
+  add_prefix_cmd ("print", class_maintenance, maintenance_print_command,
+		  "Maintenance command for printing GDB internal state.",
+		  &maintenanceprintlist, "maintenance print ", 0,
+		  &maintenancelist);
+
+#ifndef _WIN32
+  add_cmd ("dump-me", class_maintenance, maintenance_dump_me,
+	   "Get fatal error; make debugger dump its core.\n\
+GDB sets it's handling of SIGQUIT back to SIG_DFL and then sends\n\
+itself a SIGQUIT signal.",
+	   &maintenancelist);
+#endif
+
+  add_cmd ("demangle", class_maintenance, maintenance_demangle,
+	   "Demangle a C++ mangled name.\n\
+Call internal GDB demangler routine to demangle a C++ link name\n\
+and prints the result.",
+	   &maintenancelist);
+
+  add_cmd ("time", class_maintenance, maintenance_time_display,
+	   "Set the display of time usage.\n\
+If nonzero, will cause the execution time for each command to be\n\
+displayed, following the command's output.",
+	   &maintenancelist);
+
+  add_cmd ("space", class_maintenance, maintenance_space_display,
+	   "Set the display of space usage.\n\
+If nonzero, will cause the execution space for each command to be\n\
+displayed, following the command's output.",
+	   &maintenancelist);
+
+  add_cmd ("type", class_maintenance, maintenance_print_type,
+	   "Print a type chain for a given symbol.\n\
+For each node in a type chain, print the raw data for each member of\n\
+the type structure, and the interpretation of the data.",
+	   &maintenanceprintlist);
+
+  add_cmd ("symbols", class_maintenance, maintenance_print_symbols,
+	   "Print dump of current symbol definitions.\n\
+Entries in the full symbol table are dumped to file OUTFILE.\n\
+If a SOURCE file is specified, dump only that file's symbols.",
+	   &maintenanceprintlist);
+
+  add_cmd ("msymbols", class_maintenance, maintenance_print_msymbols,
+	   "Print dump of current minimal symbol definitions.\n\
+Entries in the minimal symbol table are dumped to file OUTFILE.\n\
+If a SOURCE file is specified, dump only that file's minimal symbols.",
+	   &maintenanceprintlist);
+
+  add_cmd ("psymbols", class_maintenance, maintenance_print_psymbols,
+	   "Print dump of current partial symbol definitions.\n\
+Entries in the partial symbol table are dumped to file OUTFILE.\n\
+If a SOURCE file is specified, dump only that file's partial symbols.",
+	   &maintenanceprintlist);
+
+  add_cmd ("objfiles", class_maintenance, maintenance_print_objfiles,
+	   "Print dump of current object file definitions.",
+	   &maintenanceprintlist);
+
+  add_cmd ("statistics", class_maintenance, maintenance_print_statistics,
+	   "Print statistics about internal gdb state.",
+	   &maintenanceprintlist);
+
+  add_cmd ("check-symtabs", class_maintenance, maintenance_check_symtabs,
+	   "Check consistency of psymtabs and symtabs.",
+	   &maintenancelist);
+
+  add_cmd ("translate-address", class_maintenance, maintenance_translate_address,
+	   "Translate a section name and address to a symbol.",
+	   &maintenancelist);
+
+  add_show_from_set (
+    add_set_cmd ("watchdog", class_maintenance, var_zinteger, (char *)&watchdog,
+		 "Set watchdog timer.\n\
+When non-zero, this timeout is used instead of waiting forever for a target to\n\
+finish a low-level step or continue operation.  If the specified amount of time\n\
+passes without a response from the target, an error occurs.", &setlist),
+		     &showlist);
+#endif	/* MAINTENANCE_CMDS */
+}
diff --git a/gdb/mdebugread.c b/gdb/mdebugread.c
new file mode 100644
index 0000000..1064490
--- /dev/null
+++ b/gdb/mdebugread.c
@@ -0,0 +1,4544 @@
+/* Read a symbol table in ECOFF format (Third-Eye).
+   Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+   Original version contributed by Alessandro Forin (af@cs.cmu.edu) at
+   CMU.  Major work by Per Bothner, John Gilmore and Ian Lance Taylor
+   at Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module provides the function mdebug_build_psymtabs.  It reads
+   ECOFF debugging information into partial symbol tables.  The
+   debugging information is read from two structures.  A struct
+   ecoff_debug_swap includes the sizes of each ECOFF structure and
+   swapping routines; these are fixed for a particular target.  A
+   struct ecoff_debug_info points to the debugging information for a
+   particular object file.
+
+   ECOFF symbol tables are mostly written in the byte order of the
+   target machine.  However, one section of the table (the auxiliary
+   symbol information) is written in the host byte order.  There is a
+   bit in the other symbol info which describes which host byte order
+   was used.  ECOFF thereby takes the trophy from Intel `b.out' for
+   the most brain-dead adaptation of a file format to byte order.
+
+   This module can read all four of the known byte-order combinations,
+   on any type of host.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "obstack.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "complaints.h"
+#include "demangle.h"
+
+/* These are needed if the tm.h file does not contain the necessary
+   mips specific definitions.  */
+
+#ifndef MIPS_EFI_SYMBOL_NAME
+#define MIPS_EFI_SYMBOL_NAME "__GDB_EFI_INFO__"
+extern void ecoff_relocate_efi PARAMS ((struct symbol *, CORE_ADDR));
+#include "coff/sym.h"
+#include "coff/symconst.h"
+typedef struct mips_extra_func_info {
+        long    numargs;
+        PDR     pdr;
+} *mips_extra_func_info_t;
+#ifndef RA_REGNUM
+#define RA_REGNUM 0
+#endif
+#endif
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include "gdb_stat.h"
+#include "gdb_string.h"
+
+#include "gdb-stabs.h"
+
+#include "bfd.h"
+
+#include "coff/ecoff.h"		/* COFF-like aspects of ecoff files */
+
+#include "libaout.h"		/* Private BFD a.out information.  */
+#include "aout/aout64.h"
+#include "aout/stab_gnu.h"	/* STABS information */
+
+#include "expression.h"
+#include "language.h"		/* Needed inside partial-stab.h */
+
+
+/* Provide a default mapping from a ecoff register number to a gdb REGNUM.  */
+#ifndef ECOFF_REG_TO_REGNUM
+#define ECOFF_REG_TO_REGNUM(num) (num)
+#endif
+
+/* Provide a way to test if we have both ECOFF and ELF symbol tables.  
+   We use this define in order to know whether we should override a 
+   symbol's ECOFF section with its ELF section.  This is necessary in 
+   case the symbol's ELF section could not be represented in ECOFF.  */
+#define ECOFF_IN_ELF(bfd) (bfd_get_flavour (bfd) == bfd_target_elf_flavour \
+			   && bfd_get_section_by_name (bfd, ".mdebug") != NULL)
+
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct symloc
+{
+  /* Index of the FDR that this psymtab represents.  */
+  int fdr_idx;
+  /* The BFD that the psymtab was created from.  */
+  bfd *cur_bfd;
+  const struct ecoff_debug_swap *debug_swap;
+  struct ecoff_debug_info *debug_info;
+  struct mdebug_pending **pending_list;
+  /* Pointer to external symbols for this file.  */
+  EXTR *extern_tab;
+  /* Size of extern_tab.  */
+  int extern_count;
+  enum language pst_language;
+};
+
+#define PST_PRIVATE(p) ((struct symloc *)(p)->read_symtab_private)
+#define FDR_IDX(p) (PST_PRIVATE(p)->fdr_idx)
+#define CUR_BFD(p) (PST_PRIVATE(p)->cur_bfd)
+#define DEBUG_SWAP(p) (PST_PRIVATE(p)->debug_swap)
+#define DEBUG_INFO(p) (PST_PRIVATE(p)->debug_info)
+#define PENDING_LIST(p) (PST_PRIVATE(p)->pending_list)
+
+#define SC_IS_TEXT(sc) ((sc) == scText \
+		   || (sc) == scRConst \
+          	   || (sc) == scInit \
+          	   || (sc) == scFini)
+#define SC_IS_DATA(sc) ((sc) == scData \
+		   || (sc) == scSData \
+		   || (sc) == scRData \
+		   || (sc) == scPData \
+		   || (sc) == scXData)
+#define SC_IS_COMMON(sc) ((sc) == scCommon || (sc) == scSCommon)
+#define SC_IS_BSS(sc) ((sc) == scBss || (sc) == scSBss)
+#define SC_IS_UNDEF(sc) ((sc) == scUndefined || (sc) == scSUndefined)
+                                      
+
+/* Things we import explicitly from other modules */
+
+extern int info_verbose;
+
+/* Various complaints about symbol reading that don't abort the process */
+
+static struct complaint bad_file_number_complaint =
+{"bad file number %d", 0, 0};
+
+static struct complaint index_complaint =
+{"bad aux index at symbol %s", 0, 0};
+
+static struct complaint aux_index_complaint =
+{"bad proc end in aux found from symbol %s", 0, 0};
+
+static struct complaint block_index_complaint =
+{"bad aux index at block symbol %s", 0, 0};
+
+static struct complaint unknown_ext_complaint =
+{"unknown external symbol %s", 0, 0};
+
+static struct complaint unknown_sym_complaint =
+{"unknown local symbol %s", 0, 0};
+
+static struct complaint unknown_st_complaint =
+{"with type %d", 0, 0};
+
+static struct complaint block_overflow_complaint =
+{"block containing %s overfilled", 0, 0};
+
+static struct complaint basic_type_complaint =
+{"cannot map ECOFF basic type 0x%x for %s", 0, 0};
+
+static struct complaint unknown_type_qual_complaint =
+{"unknown type qualifier 0x%x", 0, 0};
+
+static struct complaint array_index_type_complaint =
+{"illegal array index type for %s, assuming int", 0, 0};
+
+static struct complaint bad_tag_guess_complaint =
+{"guessed tag type of %s incorrectly", 0, 0};
+
+static struct complaint block_member_complaint =
+{"declaration block contains unhandled symbol type %d", 0, 0};
+
+static struct complaint stEnd_complaint =
+{"stEnd with storage class %d not handled", 0, 0};
+
+static struct complaint unknown_mdebug_symtype_complaint =
+{"unknown symbol type 0x%x", 0, 0};
+
+static struct complaint stab_unknown_complaint =
+{"unknown stabs symbol %s", 0, 0};
+
+static struct complaint pdr_for_nonsymbol_complaint =
+{"PDR for %s, but no symbol", 0, 0};
+
+static struct complaint pdr_static_symbol_complaint =
+{"can't handle PDR for static proc at 0x%lx", 0, 0};
+
+static struct complaint bad_setjmp_pdr_complaint =
+{"fixing bad setjmp PDR from libc", 0, 0};
+
+static struct complaint bad_fbitfield_complaint =
+{"can't handle TIR fBitfield for %s", 0, 0};
+
+static struct complaint bad_continued_complaint =
+{"illegal TIR continued for %s", 0, 0};
+
+static struct complaint bad_rfd_entry_complaint =
+{"bad rfd entry for %s: file %d, index %d", 0, 0};
+
+static struct complaint unexpected_type_code_complaint =
+{"unexpected type code for %s", 0, 0};
+
+static struct complaint unable_to_cross_ref_complaint =
+{"unable to cross ref btTypedef for %s", 0, 0};
+
+static struct complaint bad_indirect_xref_complaint =
+{"unable to cross ref btIndirect for %s", 0, 0};
+
+static struct complaint illegal_forward_tq0_complaint =
+{"illegal tq0 in forward typedef for %s", 0, 0};
+
+static struct complaint illegal_forward_bt_complaint =
+{"illegal bt %d in forward typedef for %s", 0, 0};
+
+static struct complaint bad_linetable_guess_complaint =
+{"guessed size of linetable for %s incorrectly", 0, 0};
+
+static struct complaint bad_ext_ifd_complaint =
+{"bad ifd for external symbol: %d (max %d)", 0, 0};
+
+static struct complaint bad_ext_iss_complaint =
+{"bad iss for external symbol: %ld (max %ld)", 0, 0};
+
+/* Macros and extra defs */
+
+/* Puns: hard to find whether -g was used and how */
+
+#define MIN_GLEVEL GLEVEL_0
+#define compare_glevel(a,b)					\
+	(((a) == GLEVEL_3) ? ((b) < GLEVEL_3) :			\
+	 ((b) == GLEVEL_3) ? -1 : (int)((b) - (a)))
+
+/* Things that really are local to this module */
+
+/* Remember what we deduced to be the source language of this psymtab. */
+
+static enum language psymtab_language = language_unknown;
+
+/* Current BFD.  */
+
+static bfd *cur_bfd;
+
+/* How to parse debugging information for CUR_BFD.  */
+
+static const struct ecoff_debug_swap *debug_swap;
+
+/* Pointers to debugging information for CUR_BFD.  */
+
+static struct ecoff_debug_info *debug_info;
+
+/* Pointer to current file decriptor record, and its index */
+
+static FDR *cur_fdr;
+static int cur_fd;
+
+/* Index of current symbol */
+
+static int cur_sdx;
+
+/* Note how much "debuggable" this image is.  We would like
+   to see at least one FDR with full symbols */
+
+static int max_gdbinfo;
+static int max_glevel;
+
+/* When examining .o files, report on undefined symbols */
+
+static int n_undef_symbols, n_undef_labels, n_undef_vars, n_undef_procs;
+
+/* Pseudo symbol to use when putting stabs into the symbol table.  */
+
+static char stabs_symbol[] = STABS_SYMBOL;
+
+/* Types corresponding to mdebug format bt* basic types.  */
+
+static struct type *mdebug_type_void;
+static struct type *mdebug_type_char;
+static struct type *mdebug_type_short;
+static struct type *mdebug_type_int_32;
+#define mdebug_type_int mdebug_type_int_32
+static struct type *mdebug_type_int_64;
+static struct type *mdebug_type_long_32;
+static struct type *mdebug_type_long_64;
+static struct type *mdebug_type_long_long_64;
+static struct type *mdebug_type_unsigned_char;
+static struct type *mdebug_type_unsigned_short;
+static struct type *mdebug_type_unsigned_int_32;
+static struct type *mdebug_type_unsigned_int_64;
+static struct type *mdebug_type_unsigned_long_32;
+static struct type *mdebug_type_unsigned_long_64;
+static struct type *mdebug_type_unsigned_long_long_64;
+static struct type *mdebug_type_adr_32;
+static struct type *mdebug_type_adr_64;
+static struct type *mdebug_type_float;
+static struct type *mdebug_type_double;
+static struct type *mdebug_type_complex;
+static struct type *mdebug_type_double_complex;
+static struct type *mdebug_type_fixed_dec;
+static struct type *mdebug_type_float_dec;
+static struct type *mdebug_type_string;
+
+/* Types for symbols from files compiled without debugging info.  */
+
+static struct type *nodebug_func_symbol_type;
+static struct type *nodebug_var_symbol_type;
+
+/* Nonzero if we have seen ecoff debugging info for a file.  */
+
+static int found_ecoff_debugging_info;
+
+/* Forward declarations */
+
+static void
+add_pending PARAMS ((FDR *, char *, struct type *));
+
+static struct mdebug_pending *
+is_pending_symbol PARAMS ((FDR *, char *));
+
+static void
+pop_parse_stack PARAMS ((void));
+
+static void
+push_parse_stack PARAMS ((void));
+
+static char *
+fdr_name PARAMS ((FDR *));
+
+static void
+mdebug_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+static int
+upgrade_type PARAMS ((int, struct type **, int, union aux_ext *, int, char *));
+
+static void
+parse_partial_symbols PARAMS ((struct objfile *,
+			       struct section_offsets *));
+
+static FDR
+*get_rfd PARAMS ((int, int));
+
+static int
+has_opaque_xref PARAMS ((FDR *, SYMR *));
+
+static int
+cross_ref PARAMS ((int, union aux_ext *, struct type **, enum type_code,
+		   char **, int, char *));
+
+static struct symbol *
+new_symbol PARAMS ((char *));
+
+static struct type *
+new_type PARAMS ((char *));
+
+static struct block *
+new_block PARAMS ((int));
+
+static struct symtab *
+new_symtab PARAMS ((char *, int, int, struct objfile *));
+
+static struct linetable *
+new_linetable PARAMS ((int));
+
+static struct blockvector *
+new_bvect PARAMS ((int));
+
+static int
+parse_symbol PARAMS ((SYMR *, union aux_ext *, char *, int, struct section_offsets *));
+
+static struct type *
+parse_type PARAMS ((int, union aux_ext *, unsigned int, int *, int, char *));
+
+static struct symbol *
+mylookup_symbol PARAMS ((char *, struct block *, namespace_enum,
+			 enum address_class));
+
+static struct block *
+shrink_block PARAMS ((struct block *, struct symtab *));
+
+static PTR
+xzalloc PARAMS ((unsigned int));
+
+static void
+sort_blocks PARAMS ((struct symtab *));
+
+static int
+compare_blocks PARAMS ((const void *, const void *));
+
+static struct partial_symtab *
+new_psymtab PARAMS ((char *, struct objfile *, struct section_offsets *));
+
+static void
+psymtab_to_symtab_1 PARAMS ((struct partial_symtab *, char *));
+
+static void
+add_block PARAMS ((struct block *, struct symtab *));
+
+static void
+add_symbol PARAMS ((struct symbol *, struct block *));
+
+static int
+add_line PARAMS ((struct linetable *, int, CORE_ADDR, int));
+
+static struct linetable *
+shrink_linetable PARAMS ((struct linetable *));
+
+static void
+handle_psymbol_enumerators PARAMS ((struct objfile *, FDR *, int, CORE_ADDR));
+
+static char *
+mdebug_next_symbol_text PARAMS ((struct objfile *));
+
+/* Address bounds for the signal trampoline in inferior, if any */
+
+CORE_ADDR sigtramp_address, sigtramp_end;
+
+/* Allocate zeroed memory */
+
+static PTR
+xzalloc (size)
+     unsigned int size;
+{
+  PTR p = xmalloc (size);
+
+  memset (p, 0, size);
+  return p;
+}
+
+/* Exported procedure: Builds a symtab from the PST partial one.
+   Restores the environment in effect when PST was created, delegates
+   most of the work to an ancillary procedure, and sorts
+   and reorders the symtab list at the end */
+
+static void
+mdebug_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+
+  if (!pst)
+    return;
+
+  if (info_verbose)
+    {
+      printf_filtered ("Reading in symbols for %s...", pst->filename);
+      gdb_flush (gdb_stdout);
+    }
+
+  next_symbol_text_func = mdebug_next_symbol_text;
+
+  psymtab_to_symtab_1 (pst, pst->filename);
+
+  /* Match with global symbols.  This only needs to be done once,
+     after all of the symtabs and dependencies have been read in.   */
+  scan_file_globals (pst->objfile);
+
+  if (info_verbose)
+    printf_filtered ("done.\n");
+}
+
+/* File-level interface functions */
+
+/* Find a file descriptor given its index RF relative to a file CF */
+
+static FDR *
+get_rfd (cf, rf)
+     int cf, rf;
+{
+  FDR *fdrs;
+  register FDR *f;
+  RFDT rfd;
+
+  fdrs = debug_info->fdr;
+  f = fdrs + cf;
+  /* Object files do not have the RFD table, all refs are absolute */
+  if (f->rfdBase == 0)
+    return fdrs + rf;
+  (*debug_swap->swap_rfd_in) (cur_bfd,
+			     ((char *) debug_info->external_rfd
+			      + ((f->rfdBase + rf)
+				 * debug_swap->external_rfd_size)),
+			     &rfd);
+  return fdrs + rfd;
+}
+
+/* Return a safer print NAME for a file descriptor */
+
+static char *
+fdr_name (f)
+     FDR *f;
+{
+  if (f->rss == -1)
+    return "<stripped file>";
+  if (f->rss == 0)
+    return "<NFY>";
+  return debug_info->ss + f->issBase + f->rss;
+}
+
+
+/* Read in and parse the symtab of the file OBJFILE.  Symbols from
+   different sections are relocated via the SECTION_OFFSETS.  */
+
+void
+mdebug_build_psymtabs (objfile, swap, info, section_offsets)
+     struct objfile *objfile;
+     const struct ecoff_debug_swap *swap;
+     struct ecoff_debug_info *info;
+     struct section_offsets *section_offsets;
+{
+  cur_bfd = objfile->obfd;
+  debug_swap = swap;
+  debug_info = info;
+
+  /* Make sure all the FDR information is swapped in.  */
+  if (info->fdr == (FDR *) NULL)
+    {
+      char *fdr_src;
+      char *fdr_end;
+      FDR *fdr_ptr;
+
+      info->fdr = (FDR *) obstack_alloc (&objfile->psymbol_obstack,
+					 (info->symbolic_header.ifdMax
+					  * sizeof (FDR)));
+      fdr_src = info->external_fdr;
+      fdr_end = (fdr_src
+		 + info->symbolic_header.ifdMax * swap->external_fdr_size);
+      fdr_ptr = info->fdr;
+      for (; fdr_src < fdr_end; fdr_src += swap->external_fdr_size, fdr_ptr++)
+	(*swap->swap_fdr_in) (objfile->obfd, fdr_src, fdr_ptr);
+    }
+
+  parse_partial_symbols (objfile, section_offsets);
+
+#if 0
+  /* Check to make sure file was compiled with -g.  If not, warn the
+     user of this limitation.  */
+  if (compare_glevel (max_glevel, GLEVEL_2) < 0)
+    {
+      if (max_gdbinfo == 0)
+	printf_unfiltered ("\n%s not compiled with -g, debugging support is limited.\n",
+		 objfile->name);
+      printf_unfiltered ("You should compile with -g2 or -g3 for best debugging support.\n");
+      gdb_flush (gdb_stdout);
+    }
+#endif
+}
+
+/* Local utilities */
+
+/* Map of FDR indexes to partial symtabs */
+
+struct pst_map
+{
+  struct partial_symtab *pst;	/* the psymtab proper */
+  long n_globals;		/* exported globals (external symbols) */
+  long globals_offset;		/* cumulative */
+};
+
+
+/* Utility stack, used to nest procedures and blocks properly.
+   It is a doubly linked list, to avoid too many alloc/free.
+   Since we might need it quite a few times it is NOT deallocated
+   after use. */
+
+static struct parse_stack
+{
+  struct parse_stack *next, *prev;
+  struct symtab *cur_st;	/* Current symtab. */
+  struct block *cur_block;	/* Block in it. */
+
+  /* What are we parsing.  stFile, or stBlock are for files and
+     blocks.  stProc or stStaticProc means we have seen the start of a
+     procedure, but not the start of the block within in.  When we see
+     the start of that block, we change it to stNil, without pushing a
+     new block, i.e. stNil means both a procedure and a block.  */
+
+  int blocktype;
+
+  int maxsyms;			/* Max symbols in this block. */
+  struct type *cur_type;	/* Type we parse fields for. */
+  int cur_field;		/* Field number in cur_type. */
+  CORE_ADDR procadr;		/* Start addres of this procedure */
+  int numargs;			/* Its argument count */
+}
+
+ *top_stack;			/* Top stack ptr */
+
+
+/* Enter a new lexical context */
+
+static void
+push_parse_stack ()
+{
+  struct parse_stack *new;
+
+  /* Reuse frames if possible */
+  if (top_stack && top_stack->prev)
+    new = top_stack->prev;
+  else
+    new = (struct parse_stack *) xzalloc (sizeof (struct parse_stack));
+  /* Initialize new frame with previous content */
+  if (top_stack)
+    {
+      register struct parse_stack *prev = new->prev;
+
+      *new = *top_stack;
+      top_stack->prev = new;
+      new->prev = prev;
+      new->next = top_stack;
+    }
+  top_stack = new;
+}
+
+/* Exit a lexical context */
+
+static void
+pop_parse_stack ()
+{
+  if (!top_stack)
+    return;
+  if (top_stack->next)
+    top_stack = top_stack->next;
+}
+
+
+/* Cross-references might be to things we haven't looked at
+   yet, e.g. type references.  To avoid too many type
+   duplications we keep a quick fixup table, an array
+   of lists of references indexed by file descriptor */
+
+struct mdebug_pending
+{
+  struct mdebug_pending *next;	/* link */
+  char *s;			/* the unswapped symbol */
+  struct type *t;		/* its partial type descriptor */
+};
+
+
+/* The pending information is kept for an entire object file, and used
+   to be in the sym_private field.  I took it out when I split
+   mdebugread from mipsread, because this might not be the only type
+   of symbols read from an object file.  Instead, we allocate the
+   pending information table when we create the partial symbols, and
+   we store a pointer to the single table in each psymtab.  */
+
+static struct mdebug_pending **pending_list;
+
+/* Check whether we already saw symbol SH in file FH */
+
+static struct mdebug_pending *
+is_pending_symbol (fh, sh)
+     FDR *fh;
+     char *sh;
+{
+  int f_idx = fh - debug_info->fdr;
+  register struct mdebug_pending *p;
+
+  /* Linear search is ok, list is typically no more than 10 deep */
+  for (p = pending_list[f_idx]; p; p = p->next)
+    if (p->s == sh)
+      break;
+  return p;
+}
+
+/* Add a new symbol SH of type T */
+
+static void
+add_pending (fh, sh, t)
+     FDR *fh;
+     char *sh;
+     struct type *t;
+{
+  int f_idx = fh - debug_info->fdr;
+  struct mdebug_pending *p = is_pending_symbol (fh, sh);
+
+  /* Make sure we do not make duplicates */
+  if (!p)
+    {
+      p = ((struct mdebug_pending *)
+	   obstack_alloc (&current_objfile->psymbol_obstack,
+			  sizeof (struct mdebug_pending)));
+      p->s = sh;
+      p->t = t;
+      p->next = pending_list[f_idx];
+      pending_list[f_idx] = p;
+    }
+}
+
+
+/* Parsing Routines proper. */
+
+/* Parse a single symbol. Mostly just make up a GDB symbol for it.
+   For blocks, procedures and types we open a new lexical context.
+   This is basically just a big switch on the symbol's type.  Argument
+   AX is the base pointer of aux symbols for this file (fh->iauxBase).
+   EXT_SH points to the unswapped symbol, which is needed for struct,
+   union, etc., types; it is NULL for an EXTR.  BIGEND says whether
+   aux symbols are big-endian or little-endian.  Return count of
+   SYMR's handled (normally one).  */
+
+static int
+parse_symbol (sh, ax, ext_sh, bigend, section_offsets)
+     SYMR *sh;
+     union aux_ext *ax;
+     char *ext_sh;
+     int bigend;
+     struct section_offsets *section_offsets;
+{
+  const bfd_size_type external_sym_size = debug_swap->external_sym_size;
+  void (* const swap_sym_in) PARAMS ((bfd *, PTR, SYMR *)) =
+    debug_swap->swap_sym_in;
+  char *name;
+  struct symbol *s;
+  struct block *b;
+  struct mdebug_pending *pend;
+  struct type *t;
+  struct field *f;
+  int count = 1;
+  enum address_class class;
+  TIR tir;
+  long svalue = sh->value;
+  int bitsize;
+
+  if (ext_sh == (char *) NULL)
+    name = debug_info->ssext + sh->iss;
+  else
+    name = debug_info->ss + cur_fdr->issBase + sh->iss;
+
+  switch (sh->sc)
+    {
+    case scText:
+    case scRConst:
+      /* Do not relocate relative values.
+	 The value of a stEnd symbol is the displacement from the
+	 corresponding start symbol value.
+	 The value of a stBlock symbol is the displacement from the
+	 procedure address.  */
+      if (sh->st != stEnd && sh->st != stBlock)
+	sh->value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+      break;
+    case scData:
+    case scSData:
+    case scRData:
+    case scPData:
+    case scXData:
+      sh->value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+      break;
+    case scBss:
+    case scSBss:
+      sh->value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+      break;
+    }
+
+  switch (sh->st)
+    {
+    case stNil:
+      break;
+
+    case stGlobal:		/* external symbol, goes into global block */
+      class = LOC_STATIC;
+      b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (top_stack->cur_st),
+			     GLOBAL_BLOCK);
+      s = new_symbol (name);
+      SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
+      goto data;
+
+    case stStatic:		/* static data, goes into current block. */
+      class = LOC_STATIC;
+      b = top_stack->cur_block;
+      s = new_symbol (name);
+      if (SC_IS_COMMON(sh->sc))
+	{
+	  /* It is a FORTRAN common block.  At least for SGI Fortran the
+	     address is not in the symbol; we need to fix it later in
+	     scan_file_globals.  */
+	  int bucket = hashname (SYMBOL_NAME (s));
+	  SYMBOL_VALUE_CHAIN (s) = global_sym_chain[bucket];
+	  global_sym_chain[bucket] = s;
+	}
+      else
+	SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
+      goto data;
+
+    case stLocal:		/* local variable, goes into current block */
+      if (sh->sc == scRegister)
+	{
+	  class = LOC_REGISTER;
+	  svalue = ECOFF_REG_TO_REGNUM (svalue);
+	}
+      else
+	class = LOC_LOCAL;
+      b = top_stack->cur_block;
+      s = new_symbol (name);
+      SYMBOL_VALUE (s) = svalue;
+
+    data:			/* Common code for symbols describing data */
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+      SYMBOL_CLASS (s) = class;
+      add_symbol (s, b);
+
+      /* Type could be missing if file is compiled without debugging info.  */
+      if (SC_IS_UNDEF(sh->sc)
+	  || sh->sc == scNil || sh->index == indexNil)
+	SYMBOL_TYPE (s) = nodebug_var_symbol_type;
+      else
+	SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name);
+      /* Value of a data symbol is its memory address */
+      break;
+
+    case stParam:		/* arg to procedure, goes into current block */
+      max_gdbinfo++;
+      found_ecoff_debugging_info = 1;
+      top_stack->numargs++;
+
+      /* Special GNU C++ name.  */
+      if (is_cplus_marker (name[0]) && name[1] == 't' && name[2] == 0)
+	name = "this";		/* FIXME, not alloc'd in obstack */
+      s = new_symbol (name);
+
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+      switch (sh->sc)
+	{
+	case scRegister:
+	  /* Pass by value in register.  */
+	  SYMBOL_CLASS(s) = LOC_REGPARM;
+	  svalue = ECOFF_REG_TO_REGNUM (svalue);
+	  break;
+	case scVar:
+	  /* Pass by reference on stack.  */
+	  SYMBOL_CLASS(s) = LOC_REF_ARG;
+	  break;
+	case scVarRegister:
+	  /* Pass by reference in register.  */
+	  SYMBOL_CLASS(s) = LOC_REGPARM_ADDR;
+	  svalue = ECOFF_REG_TO_REGNUM (svalue);
+	  break;
+	default:
+	  /* Pass by value on stack.  */
+	  SYMBOL_CLASS(s) = LOC_ARG;
+	  break;
+	}
+      SYMBOL_VALUE (s) = svalue;
+      SYMBOL_TYPE (s) = parse_type (cur_fd, ax, sh->index, 0, bigend, name);
+      add_symbol (s, top_stack->cur_block);
+      break;
+
+    case stLabel:		/* label, goes into current block */
+      s = new_symbol (name);
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;	/* so that it can be used */
+      SYMBOL_CLASS (s) = LOC_LABEL;	/* but not misused */
+      SYMBOL_VALUE_ADDRESS (s) = (CORE_ADDR) sh->value;
+      SYMBOL_TYPE (s) = mdebug_type_int;
+      add_symbol (s, top_stack->cur_block);
+      break;
+
+    case stProc:		/* Procedure, usually goes into global block */
+    case stStaticProc:		/* Static procedure, goes into current block */
+      s = new_symbol (name);
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+      SYMBOL_CLASS (s) = LOC_BLOCK;
+      /* Type of the return value */
+      if (SC_IS_UNDEF(sh->sc) || sh->sc == scNil)
+	t = mdebug_type_int;
+      else
+	{
+	  t = parse_type (cur_fd, ax, sh->index + 1, 0, bigend, name);
+	  if (STREQ(name, "malloc") && t->code == TYPE_CODE_VOID)
+	    {
+	      /* I don't know why, but, at least under Alpha GNU/Linux,
+		 when linking against a malloc without debugging
+		 symbols, its read as a function returning void---this
+		 is bad because it means we cannot call functions with
+		 string arguments interactively; i.e., "call
+		 printf("howdy\n")" would fail with the error message
+		 "program has no memory available".  To avoid this, we
+		 patch up the type and make it void*
+		 instead. (davidm@azstarnet.com)
+		 */
+	      t = make_pointer_type (t, NULL);
+	    }
+	}
+      b = top_stack->cur_block;
+      if (sh->st == stProc)
+	{
+	  struct blockvector *bv = BLOCKVECTOR (top_stack->cur_st);
+	  /* The next test should normally be true, but provides a
+	     hook for nested functions (which we don't want to make
+	     global). */
+	  if (b == BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK))
+	    b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	  /* Irix 5 sometimes has duplicate names for the same
+	     function.  We want to add such names up at the global
+	     level, not as a nested function.  */
+	  else if (sh->value == top_stack->procadr)
+	    b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	}
+      add_symbol (s, b);
+
+      /* Make a type for the procedure itself */
+      SYMBOL_TYPE (s) = lookup_function_type (t);
+
+      /* Create and enter a new lexical context */
+      b = new_block (top_stack->maxsyms);
+      SYMBOL_BLOCK_VALUE (s) = b;
+      BLOCK_FUNCTION (b) = s;
+      BLOCK_START (b) = BLOCK_END (b) = sh->value;
+      BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
+      add_block (b, top_stack->cur_st);
+
+      /* Not if we only have partial info */
+      if (SC_IS_UNDEF(sh->sc) || sh->sc == scNil)
+	break;
+
+      push_parse_stack ();
+      top_stack->cur_block = b;
+      top_stack->blocktype = sh->st;
+      top_stack->cur_type = SYMBOL_TYPE (s);
+      top_stack->cur_field = -1;
+      top_stack->procadr = sh->value;
+      top_stack->numargs = 0;
+      break;
+
+      /* Beginning of code for structure, union, and enum definitions.
+	       They all share a common set of local variables, defined here.  */
+      {
+	enum type_code type_code;
+	char *ext_tsym;
+	int nfields;
+	long max_value;
+	struct field *f;
+
+    case stStruct:		/* Start a block defining a struct type */
+	type_code = TYPE_CODE_STRUCT;
+	goto structured_common;
+
+    case stUnion:		/* Start a block defining a union type */
+	type_code = TYPE_CODE_UNION;
+	goto structured_common;
+
+    case stEnum:		/* Start a block defining an enum type */
+	type_code = TYPE_CODE_ENUM;
+	goto structured_common;
+
+    case stBlock:		/* Either a lexical block, or some type */
+	if (sh->sc != scInfo && !SC_IS_COMMON(sh->sc))
+	  goto case_stBlock_code;	/* Lexical block */
+
+	type_code = TYPE_CODE_UNDEF;	/* We have a type.  */
+
+	/* Common code for handling struct, union, enum, and/or as-yet-
+	   unknown-type blocks of info about structured data.  `type_code'
+	   has been set to the proper TYPE_CODE, if we know it.  */
+      structured_common:
+	found_ecoff_debugging_info = 1;
+	push_parse_stack ();
+	top_stack->blocktype = stBlock;
+
+	/* First count the number of fields and the highest value. */
+	nfields = 0;
+	max_value = 0;
+	for (ext_tsym = ext_sh + external_sym_size;
+	     ;
+	     ext_tsym += external_sym_size)
+	  {
+	    SYMR tsym;
+
+	    (*swap_sym_in) (cur_bfd, ext_tsym, &tsym);
+
+	    switch (tsym.st)
+	      {
+	      case stEnd:
+		goto end_of_fields;
+
+	      case stMember:
+		if (nfields == 0 && type_code == TYPE_CODE_UNDEF)
+		  /* If the type of the member is Nil (or Void),
+		     without qualifiers, assume the tag is an
+		     enumeration.
+		     Alpha cc -migrate enums are recognized by a zero
+		     index and a zero symbol value.
+		     DU 4.0 cc enums are recognized by a member type of
+		     btEnum without qualifiers and a zero symbol value.  */
+		  if (tsym.index == indexNil
+		      || (tsym.index == 0 && sh->value == 0))
+		    type_code = TYPE_CODE_ENUM;
+		  else
+		    {
+		      (*debug_swap->swap_tir_in) (bigend,
+						  &ax[tsym.index].a_ti,
+						  &tir);
+		      if ((tir.bt == btNil || tir.bt == btVoid
+			   || (tir.bt == btEnum && sh->value == 0))
+			  && tir.tq0 == tqNil)
+			type_code = TYPE_CODE_ENUM;
+		    }
+		nfields++;
+		if (tsym.value > max_value)
+		  max_value = tsym.value;
+		break;
+
+	      case stBlock:
+	      case stUnion:
+	      case stEnum:
+	      case stStruct:
+		{
+#if 0
+		  /* This is a no-op; is it trying to tell us something
+		     we should be checking?  */
+		  if (tsym.sc == scVariant);	/*UNIMPLEMENTED*/
+#endif
+		  if (tsym.index != 0)
+		    {
+		      /* This is something like a struct within a
+			 struct.  Skip over the fields of the inner
+			 struct.  The -1 is because the for loop will
+			 increment ext_tsym.  */
+		      ext_tsym = ((char *) debug_info->external_sym
+				  + ((cur_fdr->isymBase + tsym.index - 1)
+				     * external_sym_size));
+		    }
+		}
+		break;
+
+	      case stTypedef:
+		/* mips cc puts out a typedef for struct x if it is not yet
+		   defined when it encounters
+		   struct y { struct x *xp; };
+		   Just ignore it. */
+		break;
+
+	      case stIndirect:
+		/* Irix5 cc puts out a stIndirect for struct x if it is not
+		   yet defined when it encounters
+		   struct y { struct x *xp; };
+		   Just ignore it. */
+		break;
+
+	      default:
+		complain (&block_member_complaint, tsym.st);
+	      }
+	  }
+      end_of_fields:;
+
+	/* In an stBlock, there is no way to distinguish structs,
+	   unions, and enums at this point.  This is a bug in the
+	   original design (that has been fixed with the recent
+	   addition of the stStruct, stUnion, and stEnum symbol
+	   types.)  The way you can tell is if/when you see a variable
+	   or field of that type.  In that case the variable's type
+	   (in the AUX table) says if the type is struct, union, or
+	   enum, and points back to the stBlock here.  So you can
+	   patch the tag kind up later - but only if there actually is
+	   a variable or field of that type.
+
+	   So until we know for sure, we will guess at this point.
+	   The heuristic is:
+	   If the first member has index==indexNil or a void type,
+	   assume we have an enumeration.
+	   Otherwise, if there is more than one member, and all
+	   the members have offset 0, assume we have a union.
+	   Otherwise, assume we have a struct.
+
+	   The heuristic could guess wrong in the case of of an
+	   enumeration with no members or a union with one (or zero)
+	   members, or when all except the last field of a struct have
+	   width zero.  These are uncommon and/or illegal situations,
+	   and in any case guessing wrong probably doesn't matter
+	   much.
+
+	   But if we later do find out we were wrong, we fixup the tag
+	   kind.  Members of an enumeration must be handled
+	   differently from struct/union fields, and that is harder to
+	   patch up, but luckily we shouldn't need to.  (If there are
+	   any enumeration members, we can tell for sure it's an enum
+	   here.) */
+
+	if (type_code == TYPE_CODE_UNDEF)
+	  if (nfields > 1 && max_value == 0)
+	    type_code = TYPE_CODE_UNION;
+	  else
+	    type_code = TYPE_CODE_STRUCT;
+
+	/* Create a new type or use the pending type.  */
+	pend = is_pending_symbol (cur_fdr, ext_sh);
+	if (pend == (struct mdebug_pending *) NULL)
+	  {
+	    t = new_type (NULL);
+	    add_pending (cur_fdr, ext_sh, t);
+	  }
+	else
+	  t = pend->t;
+
+	/* Do not set the tag name if it is a compiler generated tag name
+	   (.Fxx or .xxfake or empty) for unnamed struct/union/enums.
+	   Alpha cc puts out an sh->iss of zero for those.  */
+	if (sh->iss == 0 || name[0] == '.' || name[0] == '\0')
+	  TYPE_TAG_NAME (t) = NULL;
+	else
+	  TYPE_TAG_NAME (t) = obconcat (&current_objfile->symbol_obstack,
+					"", "", name);
+
+	TYPE_CODE (t) = type_code;
+	TYPE_LENGTH (t) = sh->value;
+	TYPE_NFIELDS (t) = nfields;
+	TYPE_FIELDS (t) = f = ((struct field *)
+			       TYPE_ALLOC (t,
+					   nfields * sizeof (struct field)));
+
+	if (type_code == TYPE_CODE_ENUM)
+	  {
+	    int unsigned_enum = 1;
+
+	    /* This is a non-empty enum. */
+
+	    /* DEC c89 has the number of enumerators in the sh.value field,
+	       not the type length, so we have to compensate for that
+	       incompatibility quirk.
+	       This might do the wrong thing for an enum with one or two
+	       enumerators and gcc -gcoff -fshort-enums, but these cases
+	       are hopefully rare enough.
+	       Alpha cc -migrate has a sh.value field of zero, we adjust
+	       that too.  */
+	    if (TYPE_LENGTH (t) == TYPE_NFIELDS (t)
+		|| TYPE_LENGTH (t) == 0)
+	      TYPE_LENGTH (t) = TARGET_INT_BIT / HOST_CHAR_BIT;
+	    for (ext_tsym = ext_sh + external_sym_size;
+		 ;
+		 ext_tsym += external_sym_size)
+	      {
+		SYMR tsym;
+		struct symbol *enum_sym;
+
+		(*swap_sym_in) (cur_bfd, ext_tsym, &tsym);
+
+		if (tsym.st != stMember)
+		  break;
+
+		FIELD_BITPOS (*f) = tsym.value;
+		FIELD_TYPE (*f) = t;
+		FIELD_NAME (*f) = debug_info->ss + cur_fdr->issBase + tsym.iss;
+		FIELD_BITSIZE (*f) = 0;
+
+		enum_sym = ((struct symbol *)
+			    obstack_alloc (&current_objfile->symbol_obstack,
+					   sizeof (struct symbol)));
+		memset ((PTR) enum_sym, 0, sizeof (struct symbol));
+		SYMBOL_NAME (enum_sym) =
+		  obsavestring (f->name, strlen (f->name),
+				&current_objfile->symbol_obstack);
+		SYMBOL_CLASS (enum_sym) = LOC_CONST;
+		SYMBOL_TYPE (enum_sym) = t;
+		SYMBOL_NAMESPACE (enum_sym) = VAR_NAMESPACE;
+		SYMBOL_VALUE (enum_sym) = tsym.value;
+		if (SYMBOL_VALUE (enum_sym) < 0)
+		  unsigned_enum = 0;
+		add_symbol (enum_sym, top_stack->cur_block);
+
+		/* Skip the stMembers that we've handled. */
+		count++;
+		f++;
+	      }
+	    if (unsigned_enum)
+	      TYPE_FLAGS (t) |= TYPE_FLAG_UNSIGNED;
+	  }
+	/* make this the current type */
+	top_stack->cur_type = t;
+	top_stack->cur_field = 0;
+
+	/* Do not create a symbol for alpha cc unnamed structs.  */
+	if (sh->iss == 0)
+	  break;
+
+	/* gcc puts out an empty struct for an opaque struct definitions,
+	   do not create a symbol for it either.  */
+	if (TYPE_NFIELDS (t) == 0)
+	  {
+	    TYPE_FLAGS (t) |= TYPE_FLAG_STUB;
+	    break;
+	  }
+
+	s = new_symbol (name);
+	SYMBOL_NAMESPACE (s) = STRUCT_NAMESPACE;
+	SYMBOL_CLASS (s) = LOC_TYPEDEF;
+	SYMBOL_VALUE (s) = 0;
+	SYMBOL_TYPE (s) = t;
+	add_symbol (s, top_stack->cur_block);
+	break;
+
+	/* End of local variables shared by struct, union, enum, and
+	   block (as yet unknown struct/union/enum) processing.  */
+      }
+
+    case_stBlock_code:
+      found_ecoff_debugging_info = 1;
+      /* beginnning of (code) block. Value of symbol
+	 is the displacement from procedure start */
+      push_parse_stack ();
+
+      /* Do not start a new block if this is the outermost block of a
+	 procedure.  This allows the LOC_BLOCK symbol to point to the
+	 block with the local variables, so funcname::var works.  */
+      if (top_stack->blocktype == stProc
+	  || top_stack->blocktype == stStaticProc)
+	{
+	  top_stack->blocktype = stNil;
+	  break;
+	}
+
+      top_stack->blocktype = stBlock;
+      b = new_block (top_stack->maxsyms);
+      BLOCK_START (b) = sh->value + top_stack->procadr;
+      BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
+      top_stack->cur_block = b;
+      add_block (b, top_stack->cur_st);
+      break;
+
+    case stEnd:		/* end (of anything) */
+      if (sh->sc == scInfo || SC_IS_COMMON(sh->sc))
+	{
+	  /* Finished with type */
+	  top_stack->cur_type = 0;
+	}
+      else if (sh->sc == scText &&
+	       (top_stack->blocktype == stProc ||
+		top_stack->blocktype == stStaticProc))
+	{
+	  /* Finished with procedure */
+	  struct blockvector *bv = BLOCKVECTOR (top_stack->cur_st);
+	  struct mips_extra_func_info *e;
+	  struct block *b;
+	  struct type *ftype = top_stack->cur_type;
+	  int i;
+
+	  BLOCK_END (top_stack->cur_block) += sh->value;	/* size */
+
+	  /* Make up special symbol to contain procedure specific info */
+	  s = new_symbol (MIPS_EFI_SYMBOL_NAME);
+	  SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
+	  SYMBOL_CLASS (s) = LOC_CONST;
+	  SYMBOL_TYPE (s) = mdebug_type_void;
+	  e = ((struct mips_extra_func_info *)
+	       obstack_alloc (&current_objfile->symbol_obstack,
+			      sizeof (struct mips_extra_func_info)));
+	  memset ((PTR) e, 0, sizeof (struct mips_extra_func_info));
+	  SYMBOL_VALUE (s) = (long) e;
+	  e->numargs = top_stack->numargs;
+	  e->pdr.framereg = -1;
+	  add_symbol (s, top_stack->cur_block);
+
+	  /* Reallocate symbols, saving memory */
+	  b = shrink_block (top_stack->cur_block, top_stack->cur_st);
+
+	  /* f77 emits proc-level with address bounds==[0,0],
+	     So look for such child blocks, and patch them.  */
+	  for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++)
+	    {
+	      struct block *b_bad = BLOCKVECTOR_BLOCK (bv, i);
+	      if (BLOCK_SUPERBLOCK (b_bad) == b
+		  && BLOCK_START (b_bad) == top_stack->procadr
+		  && BLOCK_END (b_bad) == top_stack->procadr)
+		{
+		  BLOCK_START (b_bad) = BLOCK_START (b);
+		  BLOCK_END (b_bad) = BLOCK_END (b);
+		}
+	    }
+
+	  if (TYPE_NFIELDS (ftype) <= 0)
+	    {
+	      /* No parameter type information is recorded with the function's
+		 type.  Set that from the type of the parameter symbols. */
+	      int nparams = top_stack->numargs;
+	      int iparams;
+	      struct symbol *sym;
+
+	      if (nparams > 0)
+		{
+		  TYPE_NFIELDS (ftype) = nparams;
+		  TYPE_FIELDS (ftype) = (struct field *)
+		    TYPE_ALLOC (ftype, nparams * sizeof (struct field));
+						    
+		  for (i = iparams = 0; iparams < nparams; i++)
+		    {
+		      sym = BLOCK_SYM (b, i);
+		      switch (SYMBOL_CLASS (sym))
+			{
+			case LOC_ARG:
+			case LOC_REF_ARG:
+			case LOC_REGPARM:
+			case LOC_REGPARM_ADDR:
+			  TYPE_FIELD_TYPE (ftype, iparams) = SYMBOL_TYPE (sym);
+			  iparams++;
+			  break;
+			default:
+			  break;
+			}
+		    }
+		}
+	    }
+	}
+      else if (sh->sc == scText && top_stack->blocktype == stBlock)
+	{
+	  /* End of (code) block. The value of the symbol is the
+	     displacement from the procedure`s start address of the
+	     end of this block. */
+	  BLOCK_END (top_stack->cur_block) = sh->value + top_stack->procadr;
+	  shrink_block (top_stack->cur_block, top_stack->cur_st);
+	}
+      else if (sh->sc == scText && top_stack->blocktype == stNil)
+	{
+	  /* End of outermost block.  Pop parse stack and ignore.  The
+	     following stEnd of stProc will take care of the block.  */
+	  ;
+	}
+      else if (sh->sc == scText && top_stack->blocktype == stFile)
+	{
+	  /* End of file.  Pop parse stack and ignore.  Higher
+	     level code deals with this.  */
+	  ;
+	}
+      else
+	complain (&stEnd_complaint, sh->sc);
+
+      pop_parse_stack ();	/* restore previous lexical context */
+      break;
+
+    case stMember:		/* member of struct or union */
+      f = &TYPE_FIELDS (top_stack->cur_type)[top_stack->cur_field++];
+      FIELD_NAME (*f) = name;
+      FIELD_BITPOS (*f) = sh->value;
+      bitsize = 0;
+      FIELD_TYPE (*f) = parse_type (cur_fd, ax, sh->index, &bitsize, bigend, name);
+      FIELD_BITSIZE (*f) = bitsize;
+      break;
+
+    case stIndirect:		/* forward declaration on Irix5 */
+      /* Forward declarations from Irix5 cc are handled by cross_ref,
+	 skip them.  */
+      break;
+
+    case stTypedef:		/* type definition */
+      found_ecoff_debugging_info = 1;
+
+      /* Typedefs for forward declarations and opaque structs from alpha cc
+	 are handled by cross_ref, skip them.  */
+      if (sh->iss == 0)
+	break;
+
+      /* Parse the type or use the pending type.  */
+      pend = is_pending_symbol (cur_fdr, ext_sh);
+      if (pend == (struct mdebug_pending *) NULL)
+	{
+	  t = parse_type (cur_fd, ax, sh->index, (int *)NULL, bigend, name);
+	  add_pending (cur_fdr, ext_sh, t);
+	}
+      else
+	t = pend->t;
+
+      /* mips cc puts out a typedef with the name of the struct for forward
+	 declarations. These should not go into the symbol table and
+	 TYPE_NAME should not be set for them.
+	 They can't be distinguished from an intentional typedef to
+	 the same name however:
+	 x.h:
+		struct x { int ix; int jx; };
+		struct xx;
+	 x.c:
+		typedef struct x x;
+		struct xx {int ixx; int jxx; };
+	 generates a cross referencing stTypedef for x and xx.
+	 The user visible effect of this is that the type of a pointer
+	 to struct foo sometimes is given as `foo *' instead of `struct foo *'.
+	 The problem is fixed with alpha cc and Irix5 cc.  */
+
+      /* However if the typedef cross references to an opaque aggregate, it
+	 is safe to omit it from the symbol table.  */
+
+      if (has_opaque_xref (cur_fdr, sh))
+	break;
+      s = new_symbol (name);
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+      SYMBOL_CLASS (s) = LOC_TYPEDEF;
+      SYMBOL_BLOCK_VALUE (s) = top_stack->cur_block;
+      SYMBOL_TYPE (s) = t;
+      add_symbol (s, top_stack->cur_block);
+
+      /* Incomplete definitions of structs should not get a name.  */
+      if (TYPE_NAME (SYMBOL_TYPE (s)) == NULL
+	  && (TYPE_NFIELDS (SYMBOL_TYPE (s)) != 0
+              || (TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_STRUCT
+		  && TYPE_CODE (SYMBOL_TYPE (s)) != TYPE_CODE_UNION)))
+	{
+	  if (TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_PTR
+	      || TYPE_CODE (SYMBOL_TYPE (s)) == TYPE_CODE_FUNC)
+	    {
+	      /* If we are giving a name to a type such as "pointer to
+		 foo" or "function returning foo", we better not set
+		 the TYPE_NAME.  If the program contains "typedef char
+		 *caddr_t;", we don't want all variables of type char
+		 * to print as caddr_t.  This is not just a
+		 consequence of GDB's type management; CC and GCC (at
+		 least through version 2.4) both output variables of
+		 either type char * or caddr_t with the type
+		 refering to the stTypedef symbol for caddr_t.  If a future
+		 compiler cleans this up it GDB is not ready for it
+		 yet, but if it becomes ready we somehow need to
+		 disable this check (without breaking the PCC/GCC2.4
+		 case).
+
+		 Sigh.
+
+		 Fortunately, this check seems not to be necessary
+		 for anything except pointers or functions.  */
+	    }
+	  else
+	    TYPE_NAME (SYMBOL_TYPE (s)) = SYMBOL_NAME (s);
+	}
+      break;
+
+    case stFile:		/* file name */
+      push_parse_stack ();
+      top_stack->blocktype = sh->st;
+      break;
+
+      /* I`ve never seen these for C */
+    case stRegReloc:
+      break;			/* register relocation */
+    case stForward:
+      break;			/* forwarding address */
+    case stConstant:
+      break;			/* constant */
+    default:
+      complain (&unknown_mdebug_symtype_complaint, sh->st);
+      break;
+    }
+
+  return count;
+}
+
+/* Parse the type information provided in the raw AX entries for
+   the symbol SH. Return the bitfield size in BS, in case.
+   We must byte-swap the AX entries before we use them; BIGEND says whether
+   they are big-endian or little-endian (from fh->fBigendian).  */
+
+static struct type *
+parse_type (fd, ax, aux_index, bs, bigend, sym_name)
+     int fd;
+     union aux_ext *ax;
+     unsigned int aux_index;
+     int *bs;
+     int bigend;
+     char *sym_name;
+{
+  /* Null entries in this map are treated specially */
+  static struct type **map_bt[] =
+  {
+    &mdebug_type_void,			/* btNil */
+    &mdebug_type_adr_32,		/* btAdr */
+    &mdebug_type_char,			/* btChar */
+    &mdebug_type_unsigned_char,		/* btUChar */
+    &mdebug_type_short,			/* btShort */
+    &mdebug_type_unsigned_short,	/* btUShort */
+    &mdebug_type_int_32,		/* btInt */
+    &mdebug_type_unsigned_int_32,	/* btUInt */
+    &mdebug_type_long_32,		/* btLong */
+    &mdebug_type_unsigned_long_32,	/* btULong */
+    &mdebug_type_float,			/* btFloat */
+    &mdebug_type_double,		/* btDouble */
+    0,					/* btStruct */
+    0,					/* btUnion */
+    0,					/* btEnum */
+    0,					/* btTypedef */
+    0,					/* btRange */
+    0,					/* btSet */
+    &mdebug_type_complex,		/* btComplex */
+    &mdebug_type_double_complex,	/* btDComplex */
+    0,					/* btIndirect */
+    &mdebug_type_fixed_dec,		/* btFixedDec */
+    &mdebug_type_float_dec,		/* btFloatDec */
+    &mdebug_type_string,		/* btString */
+    0,					/* btBit */
+    0,					/* btPicture */
+    &mdebug_type_void,			/* btVoid */
+    0,					/* DEC C++:  Pointer to member */
+    0,					/* DEC C++:  Virtual function table */
+    0,					/* DEC C++:  Class (Record) */
+    &mdebug_type_long_64,		/* btLong64  */
+    &mdebug_type_unsigned_long_64,	/* btULong64 */
+    &mdebug_type_long_long_64,		/* btLongLong64  */
+    &mdebug_type_unsigned_long_long_64,	/* btULongLong64 */
+    &mdebug_type_adr_64,		/* btAdr64 */
+    &mdebug_type_int_64,		/* btInt64  */
+    &mdebug_type_unsigned_int_64,	/* btUInt64 */
+  };
+
+  TIR t[1];
+  struct type *tp = 0;
+  enum type_code type_code = TYPE_CODE_UNDEF;
+
+  /* Handle undefined types, they have indexNil. */
+  if (aux_index == indexNil)
+    return mdebug_type_int;
+
+  /* Handle corrupt aux indices.  */
+  if (aux_index >= (debug_info->fdr + fd)->caux)
+    {
+      complain (&index_complaint, sym_name);
+      return mdebug_type_int;
+    }
+  ax += aux_index;
+
+  /* Use aux as a type information record, map its basic type.  */
+  (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t);
+  if (t->bt >= (sizeof (map_bt) / sizeof (*map_bt)))
+    {
+      complain (&basic_type_complaint, t->bt, sym_name);
+      return mdebug_type_int;
+    }
+  if (map_bt[t->bt])
+    {
+      tp = *map_bt[t->bt];
+    }
+  else
+    {
+      tp = NULL;
+      /* Cannot use builtin types -- build our own */
+      switch (t->bt)
+	{
+	case btStruct:
+	  type_code = TYPE_CODE_STRUCT;
+	  break;
+	case btUnion:
+	  type_code = TYPE_CODE_UNION;
+	  break;
+	case btEnum:
+	  type_code = TYPE_CODE_ENUM;
+	  break;
+	case btRange:
+	  type_code = TYPE_CODE_RANGE;
+	  break;
+	case btSet:
+	  type_code = TYPE_CODE_SET;
+	  break;
+	case btIndirect:
+	  /* alpha cc -migrate uses this for typedefs. The true type will
+	     be obtained by crossreferencing below.  */
+	  type_code = TYPE_CODE_ERROR;
+	  break;
+	case btTypedef:
+	  /* alpha cc uses this for typedefs. The true type will be
+	     obtained by crossreferencing below.  */
+	  type_code = TYPE_CODE_ERROR;
+	  break;
+	default:
+	  complain (&basic_type_complaint, t->bt, sym_name);
+	  return mdebug_type_int;
+	}
+    }
+
+  /* Move on to next aux */
+  ax++;
+
+  if (t->fBitfield)
+    {
+      int width = AUX_GET_WIDTH (bigend, ax);
+
+      /* Inhibit core dumps with some cfront generated objects that
+	 corrupt the TIR.  */
+      if (bs == (int *)NULL)
+	{
+	  /* Alpha cc -migrate encodes char and unsigned char types
+	     as short and unsigned short types with a field width of 8.
+	     Enum types also have a field width which we ignore for now.  */
+	  if (t->bt == btShort && width == 8)
+	    tp = mdebug_type_char;
+	  else if (t->bt == btUShort && width == 8)
+	    tp = mdebug_type_unsigned_char;
+	  else if (t->bt == btEnum)
+	    ;
+	  else
+	    complain (&bad_fbitfield_complaint, sym_name);
+	}
+      else
+        *bs = width;
+      ax++;
+    }
+
+  /* A btIndirect entry cross references to an aux entry containing
+     the type.  */
+  if (t->bt == btIndirect)
+    {
+      RNDXR rn[1];
+      int rf;
+      FDR *xref_fh;
+      int xref_fd;
+
+      (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn);
+      ax++;
+      if (rn->rfd == 0xfff)
+	{
+	  rf = AUX_GET_ISYM (bigend, ax);
+	  ax++;
+	}
+      else
+	rf = rn->rfd;
+
+      if (rf == -1)
+	{
+	  complain (&bad_indirect_xref_complaint, sym_name);
+	  return mdebug_type_int;
+	}
+      xref_fh = get_rfd (fd, rf);
+      xref_fd = xref_fh - debug_info->fdr;
+      tp = parse_type (xref_fd, debug_info->external_aux + xref_fh->iauxBase,
+		       rn->index, (int *) NULL, xref_fh->fBigendian, sym_name);
+    }
+
+  /* All these types really point to some (common) MIPS type
+     definition, and only the type-qualifiers fully identify
+     them.  We'll make the same effort at sharing. */
+  if (t->bt == btStruct ||
+      t->bt == btUnion ||
+      t->bt == btEnum ||
+
+      /* btSet (I think) implies that the name is a tag name, not a typedef
+	 name.  This apparently is a MIPS extension for C sets.  */
+      t->bt == btSet)
+    {
+      char *name;
+
+      /* Try to cross reference this type, build new type on failure.  */
+      ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name);
+      if (tp == (struct type *) NULL)
+	tp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
+
+      /* DEC c89 produces cross references to qualified aggregate types,
+	 dereference them.  */
+      while (TYPE_CODE (tp) == TYPE_CODE_PTR
+	     || TYPE_CODE (tp) == TYPE_CODE_ARRAY)
+	tp = tp->target_type;
+
+      /* Make sure that TYPE_CODE(tp) has an expected type code.
+	 Any type may be returned from cross_ref if file indirect entries
+	 are corrupted.  */
+      if (TYPE_CODE (tp) != TYPE_CODE_STRUCT
+	  && TYPE_CODE (tp) != TYPE_CODE_UNION
+	  && TYPE_CODE (tp) != TYPE_CODE_ENUM)
+	{
+	  complain (&unexpected_type_code_complaint, sym_name);
+	}
+      else
+	{
+
+	  /* Usually, TYPE_CODE(tp) is already type_code.  The main
+	     exception is if we guessed wrong re struct/union/enum.
+	     But for struct vs. union a wrong guess is harmless, so
+	     don't complain().  */
+	  if ((TYPE_CODE (tp) == TYPE_CODE_ENUM
+	       && type_code != TYPE_CODE_ENUM)
+	      || (TYPE_CODE (tp) != TYPE_CODE_ENUM
+		  && type_code == TYPE_CODE_ENUM))
+	    {
+	      complain (&bad_tag_guess_complaint, sym_name);
+	    }
+
+	  if (TYPE_CODE (tp) != type_code)
+	    {
+	      TYPE_CODE (tp) = type_code;
+	    }
+
+	  /* Do not set the tag name if it is a compiler generated tag name
+	      (.Fxx or .xxfake or empty) for unnamed struct/union/enums.  */
+	  if (name[0] == '.' || name[0] == '\0')
+	    TYPE_TAG_NAME (tp) = NULL;
+	  else if (TYPE_TAG_NAME (tp) == NULL
+		   || !STREQ (TYPE_TAG_NAME (tp), name))
+	    TYPE_TAG_NAME (tp) = obsavestring (name, strlen (name),
+					       &current_objfile->type_obstack);
+	}
+    }
+
+  /* All these types really point to some (common) MIPS type
+     definition, and only the type-qualifiers fully identify
+     them.  We'll make the same effort at sharing.
+     FIXME: We are not doing any guessing on range types.  */
+  if (t->bt == btRange)
+    {
+      char *name;
+
+      /* Try to cross reference this type, build new type on failure.  */
+      ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name);
+      if (tp == (struct type *) NULL)
+	tp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
+
+      /* Make sure that TYPE_CODE(tp) has an expected type code.
+	 Any type may be returned from cross_ref if file indirect entries
+	 are corrupted.  */
+      if (TYPE_CODE (tp) != TYPE_CODE_RANGE)
+	{
+	  complain (&unexpected_type_code_complaint, sym_name);
+	}
+      else
+	{
+	  /* Usually, TYPE_CODE(tp) is already type_code.  The main
+	     exception is if we guessed wrong re struct/union/enum. */
+	  if (TYPE_CODE (tp) != type_code)
+	    {
+	      complain (&bad_tag_guess_complaint, sym_name);
+	      TYPE_CODE (tp) = type_code;
+	    }
+	  if (TYPE_NAME (tp) == NULL || !STREQ (TYPE_NAME (tp), name))
+	    TYPE_NAME (tp) = obsavestring (name, strlen (name),
+					   &current_objfile->type_obstack);
+	}
+    }
+  if (t->bt == btTypedef)
+    {
+      char *name;
+
+      /* Try to cross reference this type, it should succeed.  */
+      ax += cross_ref (fd, ax, &tp, type_code, &name, bigend, sym_name);
+      if (tp == (struct type *) NULL)
+	{
+	  complain (&unable_to_cross_ref_complaint, sym_name);
+	  tp = mdebug_type_int;
+	}
+    }
+
+  /* Deal with range types */
+  if (t->bt == btRange)
+    {
+      TYPE_NFIELDS (tp) = 2;
+      TYPE_FIELDS (tp) = ((struct field *)
+			  TYPE_ALLOC (tp, 2 * sizeof (struct field)));
+      TYPE_FIELD_NAME (tp, 0) = obsavestring ("Low", strlen ("Low"),
+					      &current_objfile->type_obstack);
+      TYPE_FIELD_BITPOS (tp, 0) = AUX_GET_DNLOW (bigend, ax);
+      ax++;
+      TYPE_FIELD_NAME (tp, 1) = obsavestring ("High", strlen ("High"),
+					      &current_objfile->type_obstack);
+      TYPE_FIELD_BITPOS (tp, 1) = AUX_GET_DNHIGH (bigend, ax);
+      ax++;
+    }
+
+  /* Parse all the type qualifiers now. If there are more
+     than 6 the game will continue in the next aux */
+
+  while (1)
+    {
+#define PARSE_TQ(tq) \
+      if (t->tq != tqNil) \
+	ax += upgrade_type(fd, &tp, t->tq, ax, bigend, sym_name); \
+      else \
+	break;
+
+      PARSE_TQ (tq0);
+      PARSE_TQ (tq1);
+      PARSE_TQ (tq2);
+      PARSE_TQ (tq3);
+      PARSE_TQ (tq4);
+      PARSE_TQ (tq5);
+#undef	PARSE_TQ
+
+      /* mips cc 2.x and gcc never put out continued aux entries.  */
+      if (!t->continued)
+	break;
+
+      (*debug_swap->swap_tir_in) (bigend, &ax->a_ti, t);
+      ax++;
+    }
+
+  /* Complain for illegal continuations due to corrupt aux entries.  */
+  if (t->continued)
+    complain (&bad_continued_complaint, sym_name);
+ 
+  return tp;
+}
+
+/* Make up a complex type from a basic one.  Type is passed by
+   reference in TPP and side-effected as necessary. The type
+   qualifier TQ says how to handle the aux symbols at AX for
+   the symbol SX we are currently analyzing.  BIGEND says whether
+   aux symbols are big-endian or little-endian.
+   Returns the number of aux symbols we parsed. */
+
+static int
+upgrade_type (fd, tpp, tq, ax, bigend, sym_name)
+     int fd;
+     struct type **tpp;
+     int tq;
+     union aux_ext *ax;
+     int bigend;
+     char *sym_name;
+{
+  int off;
+  struct type *t;
+
+  /* Used in array processing */
+  int rf, id;
+  FDR *fh;
+  struct type *range;
+  struct type *indx;
+  int lower, upper;
+  RNDXR rndx;
+
+  switch (tq)
+    {
+    case tqPtr:
+      t = lookup_pointer_type (*tpp);
+      *tpp = t;
+      return 0;
+
+    case tqProc:
+      t = lookup_function_type (*tpp);
+      *tpp = t;
+      return 0;
+
+    case tqArray:
+      off = 0;
+
+      /* Determine and record the domain type (type of index) */
+      (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, &rndx);
+      id = rndx.index;
+      rf = rndx.rfd;
+      if (rf == 0xfff)
+	{
+	  ax++;
+	  rf = AUX_GET_ISYM (bigend, ax);
+	  off++;
+	}
+      fh = get_rfd (fd, rf);
+
+      indx = parse_type (fh - debug_info->fdr,
+			 debug_info->external_aux + fh->iauxBase,
+			 id, (int *) NULL, bigend, sym_name);
+
+      /* The bounds type should be an integer type, but might be anything
+	 else due to corrupt aux entries.  */
+      if (TYPE_CODE (indx) != TYPE_CODE_INT)
+	{
+	  complain (&array_index_type_complaint, sym_name);
+	  indx = mdebug_type_int;
+	}
+
+      /* Get the bounds, and create the array type.  */
+      ax++;
+      lower = AUX_GET_DNLOW (bigend, ax);
+      ax++;
+      upper = AUX_GET_DNHIGH (bigend, ax);
+      ax++;
+      rf = AUX_GET_WIDTH (bigend, ax);	/* bit size of array element */
+
+      range = create_range_type ((struct type *) NULL, indx,
+				 lower, upper);
+
+      t = create_array_type ((struct type *) NULL, *tpp, range);
+
+      /* We used to fill in the supplied array element bitsize
+	 here if the TYPE_LENGTH of the target type was zero.
+	 This happens for a `pointer to an array of anonymous structs',
+	 but in this case the array element bitsize is also zero,
+	 so nothing is gained.
+	 And we used to check the TYPE_LENGTH of the target type against
+	 the supplied array element bitsize.
+	 gcc causes a mismatch for `pointer to array of object',
+	 since the sdb directives it uses do not have a way of
+	 specifying the bitsize, but it does no harm (the
+	 TYPE_LENGTH should be correct) and we should be able to
+	 ignore the erroneous bitsize from the auxiliary entry safely.
+	 dbx seems to ignore it too.  */
+
+      /* TYPE_FLAG_TARGET_STUB now takes care of the zero TYPE_LENGTH
+	 problem.  */
+      if (TYPE_LENGTH (*tpp) == 0)
+	{
+	  TYPE_FLAGS (t) |= TYPE_FLAG_TARGET_STUB;
+	}
+
+      *tpp = t;
+      return 4 + off;
+
+    case tqVol:
+      /* Volatile -- currently ignored */
+      return 0;
+
+    case tqConst:
+      /* Const -- currently ignored */
+      return 0;
+
+    default:
+      complain (&unknown_type_qual_complaint, tq);
+      return 0;
+    }
+}
+
+
+/* Parse a procedure descriptor record PR.  Note that the procedure is
+   parsed _after_ the local symbols, now we just insert the extra
+   information we need into a MIPS_EFI_SYMBOL_NAME symbol that has
+   already been placed in the procedure's main block.  Note also that
+   images that have been partially stripped (ld -x) have been deprived
+   of local symbols, and we have to cope with them here.  FIRST_OFF is
+   the offset of the first procedure for this FDR; we adjust the
+   address by this amount, but I don't know why.  SEARCH_SYMTAB is the symtab
+   to look for the function which contains the MIPS_EFI_SYMBOL_NAME symbol
+   in question, or NULL to use top_stack->cur_block.  */
+
+static void parse_procedure PARAMS ((PDR *, struct symtab *,
+				     struct partial_symtab *));
+
+static void
+parse_procedure (pr, search_symtab, pst)
+     PDR *pr;
+     struct symtab *search_symtab;
+     struct partial_symtab *pst;
+{
+  struct symbol *s, *i;
+  struct block *b;
+  struct mips_extra_func_info *e;
+  char *sh_name;
+
+  /* Simple rule to find files linked "-x" */
+  if (cur_fdr->rss == -1)
+    {
+      if (pr->isym == -1)
+	{
+	  /* Static procedure at address pr->adr.  Sigh. */
+	  /* FIXME-32x64.  assuming pr->adr fits in long.  */
+	  complain (&pdr_static_symbol_complaint, (unsigned long) pr->adr);
+	  return;
+	}
+      else
+	{
+	  /* external */
+	  EXTR she;
+	  
+	  (*debug_swap->swap_ext_in) (cur_bfd,
+				      ((char *) debug_info->external_ext
+				       + (pr->isym
+					  * debug_swap->external_ext_size)),
+				      &she);
+	  sh_name = debug_info->ssext + she.asym.iss;
+	}
+    }
+  else
+    {
+      /* Full symbols */
+      SYMR sh;
+
+      (*debug_swap->swap_sym_in) (cur_bfd,
+				  ((char *) debug_info->external_sym
+				   + ((cur_fdr->isymBase + pr->isym)
+				      * debug_swap->external_sym_size)),
+				  &sh);
+      sh_name = debug_info->ss + cur_fdr->issBase + sh.iss;
+    }
+
+  if (search_symtab != NULL)
+    {
+#if 0
+      /* This loses both in the case mentioned (want a static, find a global),
+	 but also if we are looking up a non-mangled name which happens to
+	 match the name of a mangled function.  */
+      /* We have to save the cur_fdr across the call to lookup_symbol.
+	 If the pdr is for a static function and if a global function with
+	 the same name exists, lookup_symbol will eventually read in the symtab
+	 for the global function and clobber cur_fdr.  */
+      FDR *save_cur_fdr = cur_fdr;
+      s = lookup_symbol (sh_name, NULL, VAR_NAMESPACE, 0, NULL);
+      cur_fdr = save_cur_fdr;
+#else
+      s = mylookup_symbol
+	(sh_name,
+	 BLOCKVECTOR_BLOCK (BLOCKVECTOR (search_symtab), STATIC_BLOCK),
+	 VAR_NAMESPACE,
+	 LOC_BLOCK);
+#endif
+    }
+  else
+    s = mylookup_symbol (sh_name, top_stack->cur_block,
+			 VAR_NAMESPACE, LOC_BLOCK);
+
+  if (s != 0)
+    {
+      b = SYMBOL_BLOCK_VALUE (s);
+    }
+  else
+    {
+      complain (&pdr_for_nonsymbol_complaint, sh_name);
+#if 1
+      return;
+#else
+/* FIXME -- delete.  We can't do symbol allocation now; it's all done.  */
+      s = new_symbol (sh_name);
+      SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+      SYMBOL_CLASS (s) = LOC_BLOCK;
+      /* Donno its type, hope int is ok */
+      SYMBOL_TYPE (s) = lookup_function_type (mdebug_type_int);
+      add_symbol (s, top_stack->cur_block);
+      /* Wont have symbols for this one */
+      b = new_block (2);
+      SYMBOL_BLOCK_VALUE (s) = b;
+      BLOCK_FUNCTION (b) = s;
+      BLOCK_START (b) = pr->adr;
+      /* BOUND used to be the end of procedure's text, but the
+	 argument is no longer passed in.  */
+      BLOCK_END (b) = bound;
+      BLOCK_SUPERBLOCK (b) = top_stack->cur_block;
+      add_block (b, top_stack->cur_st);
+#endif
+    }
+
+  i = mylookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, LOC_CONST);
+
+  if (i)
+    {
+      e = (struct mips_extra_func_info *) SYMBOL_VALUE (i);
+      e->pdr = *pr;
+      e->pdr.isym = (long) s;
+
+      /* GDB expects the absolute function start address for the
+	 procedure descriptor in e->pdr.adr.
+	 As the address in the procedure descriptor is usually relative,
+	 we would have to relocate e->pdr.adr with cur_fdr->adr and
+	 ANOFFSET (pst->section_offsets, SECT_OFF_TEXT).
+	 Unfortunately cur_fdr->adr and e->pdr.adr are both absolute
+	 in shared libraries on some systems, and on other systems
+	 e->pdr.adr is sometimes offset by a bogus value.
+	 To work around these problems, we replace e->pdr.adr with
+	 the start address of the function.  */
+      e->pdr.adr = BLOCK_START (b);
+
+      /* Correct incorrect setjmp procedure descriptor from the library
+	 to make backtrace through setjmp work.  */
+      if (e->pdr.pcreg == 0 && STREQ (sh_name, "setjmp"))
+	{
+	  complain (&bad_setjmp_pdr_complaint, 0);
+	  e->pdr.pcreg = RA_REGNUM;
+	  e->pdr.regmask = 0x80000000;
+	  e->pdr.regoffset = -4;
+	}
+    }
+
+  /* It would be reasonable that functions that have been compiled
+     without debugging info have a btNil type for their return value,
+     and functions that are void and are compiled with debugging info
+     have btVoid.
+     gcc and DEC f77 put out btNil types for both cases, so btNil is mapped
+     to TYPE_CODE_VOID in parse_type to get the `compiled with debugging info'
+     case right.
+     The glevel field in cur_fdr could be used to determine the presence
+     of debugging info, but GCC doesn't always pass the -g switch settings
+     to the assembler and GAS doesn't set the glevel field from the -g switch
+     settings.
+     To work around these problems, the return value type of a TYPE_CODE_VOID
+     function is adjusted accordingly if no debugging info was found in the
+     compilation unit.  */
+ 
+  if (processing_gcc_compilation == 0
+      && found_ecoff_debugging_info == 0
+      && TYPE_CODE (TYPE_TARGET_TYPE (SYMBOL_TYPE (s))) == TYPE_CODE_VOID)
+    SYMBOL_TYPE (s) = nodebug_func_symbol_type;
+}
+
+/* Relocate the extra function info pointed to by the symbol table.  */
+
+void
+ecoff_relocate_efi (sym, delta)
+     struct symbol *sym;
+     CORE_ADDR delta;
+{
+  struct mips_extra_func_info *e;
+
+  e = (struct mips_extra_func_info *) SYMBOL_VALUE (sym);
+  
+  e->pdr.adr += delta;
+}
+
+/* Parse the external symbol ES. Just call parse_symbol() after
+   making sure we know where the aux are for it.
+   BIGEND says whether aux entries are big-endian or little-endian.
+
+   This routine clobbers top_stack->cur_block and ->cur_st. */
+
+static void parse_external PARAMS ((EXTR *, int, struct section_offsets *));
+
+static void
+parse_external (es, bigend, section_offsets)
+     EXTR *es;
+     int bigend;
+     struct section_offsets *section_offsets;
+{
+  union aux_ext *ax;
+
+  if (es->ifd != ifdNil)
+    {
+      cur_fd = es->ifd;
+      cur_fdr = debug_info->fdr + cur_fd;
+      ax = debug_info->external_aux + cur_fdr->iauxBase;
+    }
+  else
+    {
+      cur_fdr = debug_info->fdr;
+      ax = 0;
+    }
+
+  /* Reading .o files */
+  if (SC_IS_UNDEF(es->asym.sc) || es->asym.sc == scNil)
+    {
+      char *what;
+      switch (es->asym.st)
+	{
+	case stNil:
+	  /* These are generated for static symbols in .o files,
+	     ignore them.  */
+	  return;
+	case stStaticProc:
+	case stProc:
+	  what = "procedure";
+	  n_undef_procs++;
+	  break;
+	case stGlobal:
+	  what = "variable";
+	  n_undef_vars++;
+	  break;
+	case stLabel:
+	  what = "label";
+	  n_undef_labels++;
+	  break;
+	default:
+	  what = "symbol";
+	  break;
+	}
+      n_undef_symbols++;
+      /* FIXME:  Turn this into a complaint? */
+      if (info_verbose)
+	printf_filtered ("Warning: %s `%s' is undefined (in %s)\n",
+			 what, debug_info->ssext + es->asym.iss,
+			 fdr_name (cur_fdr));
+      return;
+    }
+
+  switch (es->asym.st)
+    {
+    case stProc:
+    case stStaticProc:
+      /* There is no need to parse the external procedure symbols.
+	 If they are from objects compiled without -g, their index will
+	 be indexNil, and the symbol definition from the minimal symbol
+	 is preferrable (yielding a function returning int instead of int).
+	 If the index points to a local procedure symbol, the local
+	 symbol already provides the correct type.
+	 Note that the index of the external procedure symbol points
+	 to the local procedure symbol in the local symbol table, and
+	 _not_ to the auxiliary symbol info.  */
+      break;
+    case stGlobal:
+    case stLabel:
+      /* Global common symbols are resolved by the runtime loader,
+	 ignore them.  */
+      if (SC_IS_COMMON(es->asym.sc))
+	break;
+
+      /* Note that the case of a symbol with indexNil must be handled
+	 anyways by parse_symbol().  */
+      parse_symbol (&es->asym, ax, (char *) NULL, bigend, section_offsets);
+      break;
+    default:
+      break;
+    }
+}
+
+/* Parse the line number info for file descriptor FH into
+   GDB's linetable LT.  MIPS' encoding requires a little bit
+   of magic to get things out.  Note also that MIPS' line
+   numbers can go back and forth, apparently we can live
+   with that and do not need to reorder our linetables */
+
+static void parse_lines PARAMS ((FDR *, PDR *, struct linetable *, int,
+				 struct partial_symtab *, CORE_ADDR));
+
+static void
+parse_lines (fh, pr, lt, maxlines, pst, lowest_pdr_addr)
+     FDR *fh;
+     PDR *pr;
+     struct linetable *lt;
+     int maxlines;
+     struct partial_symtab *pst;
+     CORE_ADDR lowest_pdr_addr;
+{
+  unsigned char *base;
+  int j, k;
+  int delta, count, lineno = 0;
+
+  if (fh->cbLine == 0)
+    return;
+
+  /* Scan by procedure descriptors */
+  k = 0;
+  for (j = 0; j < fh->cpd; j++, pr++)
+    {
+      CORE_ADDR l;
+      CORE_ADDR adr;
+      unsigned char *halt;
+
+      /* No code for this one */
+      if (pr->iline == ilineNil ||
+	  pr->lnLow == -1 || pr->lnHigh == -1)
+	continue;
+
+      /* Determine start and end address of compressed line bytes for
+	 this procedure.  */
+      base = debug_info->line + fh->cbLineOffset;
+      if (j != (fh->cpd - 1))
+ 	halt = base + pr[1].cbLineOffset;
+      else
+ 	halt = base + fh->cbLine;
+      base += pr->cbLineOffset;
+
+      adr = pst->textlow + pr->adr - lowest_pdr_addr;
+
+      l = adr >> 2;		/* in words */
+      for (lineno = pr->lnLow; base < halt; )
+	{
+	  count = *base & 0x0f;
+	  delta = *base++ >> 4;
+	  if (delta >= 8)
+	    delta -= 16;
+	  if (delta == -8)
+	    {
+	      delta = (base[0] << 8) | base[1];
+	      if (delta >= 0x8000)
+		delta -= 0x10000;
+	      base += 2;
+	    }
+	  lineno += delta;	/* first delta is 0 */
+
+	  /* Complain if the line table overflows. Could happen
+	     with corrupt binaries.  */
+	  if (lt->nitems >= maxlines)
+	    {
+	      complain (&bad_linetable_guess_complaint, fdr_name (fh));
+	      break;
+	    }
+	  k = add_line (lt, lineno, l, k);
+	  l += count + 1;
+	}
+    }
+}
+
+/* Master parsing procedure for first-pass reading of file symbols
+   into a partial_symtab.  */
+
+static void
+parse_partial_symbols (objfile, section_offsets)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+{
+  const bfd_size_type external_sym_size = debug_swap->external_sym_size;
+  const bfd_size_type external_rfd_size = debug_swap->external_rfd_size;
+  const bfd_size_type external_ext_size = debug_swap->external_ext_size;
+  void (* const swap_ext_in) PARAMS ((bfd *, PTR, EXTR *))
+    = debug_swap->swap_ext_in;
+  void (* const swap_sym_in) PARAMS ((bfd *, PTR, SYMR *))
+    = debug_swap->swap_sym_in;
+  void (* const swap_rfd_in) PARAMS ((bfd *, PTR, RFDT *))
+    = debug_swap->swap_rfd_in;
+  int f_idx, s_idx;
+  HDRR *hdr = &debug_info->symbolic_header;
+  /* Running pointers */
+  FDR *fh;
+  char *ext_out;
+  char *ext_out_end;
+  EXTR *ext_block;
+  register EXTR *ext_in;
+  EXTR *ext_in_end;
+  SYMR sh;
+  struct partial_symtab *pst;
+  int textlow_not_set = 1;
+  int past_first_source_file = 0;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+  EXTR *extern_tab;
+  struct pst_map *fdr_to_pst;
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+  struct cleanup *old_chain;
+  char *name;
+  enum language prev_language;
+  asection *text_sect;
+  int relocatable = 0;
+
+  /* Irix 5.2 shared libraries have a fh->adr field of zero, but
+     the shared libraries are prelinked at a high memory address.
+     We have to adjust the start address of the object file for this case,
+     by setting it to the start address of the first procedure in the file.
+     But we should do no adjustments if we are debugging a .o file, where
+     the text section (and fh->adr) really starts at zero.  */
+  text_sect = bfd_get_section_by_name (cur_bfd, ".text");
+  if (text_sect != NULL
+      && (bfd_get_section_flags (cur_bfd, text_sect) & SEC_RELOC))
+    relocatable = 1;
+
+  extern_tab = (EXTR *) obstack_alloc (&objfile->psymbol_obstack,
+				       sizeof (EXTR) * hdr->iextMax);
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+  next_symbol_text_func = mdebug_next_symbol_text;
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  last_source_file = NULL;
+
+  /*
+   * Big plan:
+   *
+   * Only parse the Local and External symbols, and the Relative FDR.
+   * Fixup enough of the loader symtab to be able to use it.
+   * Allocate space only for the file's portions we need to
+   * look at. (XXX)
+   */
+
+  max_gdbinfo = 0;
+  max_glevel = MIN_GLEVEL;
+
+  /* Allocate the map FDR -> PST.
+     Minor hack: -O3 images might claim some global data belongs
+     to FDR -1. We`ll go along with that */
+  fdr_to_pst = (struct pst_map *) xzalloc ((hdr->ifdMax + 1) * sizeof *fdr_to_pst);
+  old_chain = make_cleanup (free, fdr_to_pst);
+  fdr_to_pst++;
+  {
+    struct partial_symtab *pst = new_psymtab ("", objfile, section_offsets);
+    fdr_to_pst[-1].pst = pst;
+    FDR_IDX (pst) = -1;
+  }
+
+  /* Allocate the global pending list.  */
+  pending_list =
+    ((struct mdebug_pending **)
+     obstack_alloc (&objfile->psymbol_obstack,
+		    hdr->ifdMax * sizeof (struct mdebug_pending *)));
+  memset ((PTR) pending_list, 0,
+	  hdr->ifdMax * sizeof (struct mdebug_pending *));
+
+  /* Pass 0 over external syms: swap them in.  */
+  ext_block = (EXTR *) xmalloc (hdr->iextMax * sizeof (EXTR));
+  make_cleanup (free, ext_block);
+
+  ext_out = (char *) debug_info->external_ext;
+  ext_out_end = ext_out + hdr->iextMax * external_ext_size;
+  ext_in = ext_block;
+  for (; ext_out < ext_out_end; ext_out += external_ext_size, ext_in++)
+    (*swap_ext_in) (cur_bfd, ext_out, ext_in);
+
+  /* Pass 1 over external syms: Presize and partition the list */
+  ext_in = ext_block;
+  ext_in_end = ext_in + hdr->iextMax;
+  for (; ext_in < ext_in_end; ext_in++)
+    {
+      /* See calls to complain below.  */
+      if (ext_in->ifd >= -1
+	  && ext_in->ifd < hdr->ifdMax
+	  && ext_in->asym.iss >= 0
+	  && ext_in->asym.iss < hdr->issExtMax)
+	fdr_to_pst[ext_in->ifd].n_globals++;
+    }
+
+  /* Pass 1.5 over files:  partition out global symbol space */
+  s_idx = 0;
+  for (f_idx = -1; f_idx < hdr->ifdMax; f_idx++)
+    {
+      fdr_to_pst[f_idx].globals_offset = s_idx;
+      s_idx += fdr_to_pst[f_idx].n_globals;
+      fdr_to_pst[f_idx].n_globals = 0;
+    }
+
+  /* ECOFF in ELF:
+
+     For ECOFF in ELF, we skip the creation of the minimal symbols.
+     The ECOFF symbols should be a subset of the Elf symbols, and the 
+     section information of the elf symbols will be more accurate.
+     FIXME!  What about Irix 5's native linker?
+
+     By default, Elf sections which don't exist in ECOFF 
+     get put in ECOFF's absolute section by the gnu linker.
+     Since absolute sections don't get relocated, we 
+     end up calculating an address different from that of 
+     the symbol's minimal symbol (created earlier from the
+     Elf symtab).  
+
+     To fix this, either :
+     1) don't create the duplicate symbol
+	 (assumes ECOFF symtab is a subset of the ELF symtab;
+	 assumes no side-effects result from ignoring ECOFF symbol)
+     2) create it, only if lookup for existing symbol in ELF's minimal 
+        symbols fails
+	 (inefficient; 
+	 assumes no side-effects result from ignoring ECOFF symbol)
+     3) create it, but lookup ELF's minimal symbol and use it's section
+        during relocation, then modify "uniqify" phase to merge and 
+        eliminate the duplicate symbol
+	 (highly inefficient)
+
+     I've implemented #1 here...
+     Skip the creation of the minimal symbols based on the ECOFF 
+     symbol table. */
+
+    /* Pass 2 over external syms: fill in external symbols */
+    ext_in = ext_block;
+    ext_in_end = ext_in + hdr->iextMax;
+    for (; ext_in < ext_in_end; ext_in++)
+      {
+	enum minimal_symbol_type ms_type = mst_text;
+	CORE_ADDR svalue = ext_in->asym.value;
+
+	/* The Irix 5 native tools seem to sometimes generate bogus
+	   external symbols.  */
+	if (ext_in->ifd < -1 || ext_in->ifd >= hdr->ifdMax)
+	  {
+	    complain (&bad_ext_ifd_complaint, ext_in->ifd, hdr->ifdMax);
+	    continue;
+	  }
+	if (ext_in->asym.iss < 0 || ext_in->asym.iss >= hdr->issExtMax)
+	  {
+	    complain (&bad_ext_iss_complaint, ext_in->asym.iss,
+			hdr->issExtMax);
+	    continue;
+	  }
+
+	extern_tab[fdr_to_pst[ext_in->ifd].globals_offset
+		   + fdr_to_pst[ext_in->ifd].n_globals++] = *ext_in;
+
+
+	if (SC_IS_UNDEF(ext_in->asym.sc) || ext_in->asym.sc == scNil)
+	  continue;
+
+    
+	/* Pass 3 over files, over local syms: fill in static symbols */
+	name = debug_info->ssext + ext_in->asym.iss;
+
+	/* Process ECOFF Symbol Types and Storage Classes */
+	switch (ext_in->asym.st)
+	  {
+	  case stProc:
+	    /* Beginnning of Procedure */
+	    svalue += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	    break;
+	  case stStaticProc:
+	    /* Load time only static procs */
+	    ms_type = mst_file_text;
+	    svalue += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	    break;
+	  case stGlobal:
+	    /* External symbol */
+	    if (SC_IS_COMMON (ext_in->asym.sc))
+	      {
+		/* The value of a common symbol is its size, not its address.
+		   Ignore it.  */
+		continue;
+	      }
+	    else if (SC_IS_DATA (ext_in->asym.sc))
+	      {
+		ms_type = mst_data;
+		svalue += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	      }
+	    else if (SC_IS_BSS (ext_in->asym.sc))
+	      {
+		ms_type = mst_bss;
+		svalue += ANOFFSET (section_offsets, SECT_OFF_BSS);
+	      }
+	    else
+	      ms_type = mst_abs;
+	    break;
+	  case stLabel:
+	    /* Label */
+	    if (SC_IS_TEXT (ext_in->asym.sc))
+	      {
+		ms_type = mst_file_text;
+		svalue += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      }
+	    else if (SC_IS_DATA (ext_in->asym.sc))
+	      {
+		ms_type = mst_file_data;
+		svalue += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	      }
+	    else if (SC_IS_BSS (ext_in->asym.sc))
+	      {
+		ms_type = mst_file_bss;
+		svalue += ANOFFSET (section_offsets, SECT_OFF_BSS);
+	      }
+	    else
+	      ms_type = mst_abs;
+	    break;
+	  case stLocal:
+	  case stNil:
+	    /* The alpha has the section start addresses in stLocal symbols
+		 whose name starts with a `.'. Skip those but complain for all
+		 other stLocal symbols.
+		 Irix6 puts the section start addresses in stNil symbols, skip
+		 those too.*/
+	    if (name[0] == '.')
+	      continue;
+	    /* Fall through.  */
+	  default:
+	    ms_type = mst_unknown;
+	    complain (&unknown_ext_complaint, name);
+	  }
+        if (!ECOFF_IN_ELF(cur_bfd))
+	  prim_record_minimal_symbol (name, svalue, ms_type, objfile);
+      }
+
+  /* Pass 3 over files, over local syms: fill in static symbols */
+  for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++)
+    {
+      struct partial_symtab *save_pst;
+      EXTR *ext_ptr;
+      CORE_ADDR textlow;
+
+      cur_fdr = fh = debug_info->fdr + f_idx;
+
+      if (fh->csym == 0)
+	{
+	  fdr_to_pst[f_idx].pst = NULL;
+	  continue;
+	}
+
+      /* Determine the start address for this object file from the
+	 file header and relocate it, except for Irix 5.2 zero fh->adr.  */
+      if (fh->cpd)
+	{
+	  textlow = fh->adr;
+	  if (relocatable || textlow != 0)
+	    textlow += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	}
+      else
+	textlow = 0;
+      pst = start_psymtab_common (objfile, section_offsets,
+				  fdr_name (fh),
+				  textlow,
+				  objfile->global_psymbols.next,
+				  objfile->static_psymbols.next);
+      pst->read_symtab_private = ((char *)
+				  obstack_alloc (&objfile->psymbol_obstack,
+						 sizeof (struct symloc)));
+      memset ((PTR) pst->read_symtab_private, 0, sizeof (struct symloc));
+
+      save_pst = pst;
+      FDR_IDX (pst) = f_idx;
+      CUR_BFD (pst) = cur_bfd;
+      DEBUG_SWAP (pst) = debug_swap;
+      DEBUG_INFO (pst) = debug_info;
+      PENDING_LIST (pst) = pending_list;
+
+      /* The way to turn this into a symtab is to call... */
+      pst->read_symtab = mdebug_psymtab_to_symtab;
+
+      /* Set up language for the pst.
+         The language from the FDR is used if it is unambigious (e.g. cfront
+	 with native cc and g++ will set the language to C).
+	 Otherwise we have to deduce the language from the filename.
+	 Native ecoff has every header file in a separate FDR, so
+	 deduce_language_from_filename will return language_unknown for
+	 a header file, which is not what we want.
+	 But the FDRs for the header files are after the FDR for the source
+	 file, so we can assign the language of the source file to the
+	 following header files. Then we save the language in the private
+	 pst data so that we can reuse it when building symtabs.  */
+      prev_language = psymtab_language;
+
+      switch (fh->lang)
+	{
+	case langCplusplusV2:
+	  psymtab_language = language_cplus;
+	  break;
+	default:
+	  psymtab_language = deduce_language_from_filename (fdr_name (fh));
+	  break;
+	}
+      if (psymtab_language == language_unknown)
+	psymtab_language = prev_language;
+      PST_PRIVATE (pst)->pst_language = psymtab_language;
+
+      pst->texthigh = pst->textlow;
+
+      /* For stabs-in-ecoff files, the second symbol must be @stab.
+	 This symbol is emitted by mips-tfile to signal that the
+	 current object file uses encapsulated stabs instead of mips
+	 ecoff for local symbols.  (It is the second symbol because
+	 the first symbol is the stFile used to signal the start of a
+	 file). */
+      processing_gcc_compilation = 0;
+      if (fh->csym >= 2)
+	{
+	  (*swap_sym_in) (cur_bfd,
+			  ((char *) debug_info->external_sym
+			   + (fh->isymBase + 1) * external_sym_size),
+			  &sh);
+	  if (STREQ (debug_info->ss + fh->issBase + sh.iss, stabs_symbol))
+	    processing_gcc_compilation = 2;
+	}
+
+      if (processing_gcc_compilation != 0)
+	{
+	  for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++)
+	    {
+	      int type_code;
+	      char *namestring;
+
+	      (*swap_sym_in) (cur_bfd,
+			      (((char *) debug_info->external_sym)
+			       + (fh->isymBase + cur_sdx) * external_sym_size),
+			      &sh);
+	      type_code = ECOFF_UNMARK_STAB (sh.index);
+	      if (!ECOFF_IS_STAB (&sh))
+		{
+		  if (sh.st == stProc || sh.st == stStaticProc)
+		    {
+		      CORE_ADDR procaddr;
+		      long isym;
+	
+		      sh.value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		      if (sh.st == stStaticProc)
+			{
+			  namestring = debug_info->ss + fh->issBase + sh.iss;
+			  prim_record_minimal_symbol_and_info (namestring,
+							       sh.value,
+							       mst_file_text,
+							       NULL,
+							       SECT_OFF_TEXT,
+							       NULL,
+							       objfile);
+			}
+		      procaddr = sh.value;
+
+		      isym = AUX_GET_ISYM (fh->fBigendian,
+					   (debug_info->external_aux
+					    + fh->iauxBase
+					    + sh.index));
+		      (*swap_sym_in) (cur_bfd,
+				      ((char *) debug_info->external_sym
+				       + ((fh->isymBase + isym - 1)
+					  * external_sym_size)),
+				      &sh);
+		      if (sh.st == stEnd)
+			{
+			  CORE_ADDR high = procaddr + sh.value;
+
+	      		  /* Kludge for Irix 5.2 zero fh->adr.  */
+			  if (!relocatable
+			      && (pst->textlow == 0 || procaddr < pst->textlow))
+			    pst->textlow = procaddr;
+			  if (high > pst->texthigh)
+			    pst->texthigh = high;
+			}
+		    }
+		  else if (sh.st == stStatic)
+		    {
+		      switch (sh.sc)
+			{
+			case scUndefined:
+			case scSUndefined:
+			case scNil:
+			case scAbs:
+			  break;
+
+			case scData:
+			case scSData:
+			case scRData:
+			case scPData:
+			case scXData:
+			  namestring = debug_info->ss + fh->issBase + sh.iss;
+		          sh.value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+			  prim_record_minimal_symbol_and_info (namestring,
+							       sh.value,
+							       mst_file_data,
+							       NULL,
+							       SECT_OFF_DATA,
+							       NULL,
+							       objfile);
+			  break;
+
+			default:
+			  /* FIXME!  Shouldn't this use cases for bss, 
+			     then have the default be abs? */
+			  namestring = debug_info->ss + fh->issBase + sh.iss;
+		          sh.value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+			  prim_record_minimal_symbol_and_info (namestring,
+							       sh.value,
+							       mst_file_bss,
+							       NULL,
+							       SECT_OFF_BSS,
+							       NULL,
+							       objfile);
+			  break;
+			}
+		    }
+		  continue;
+		}
+	      /* Handle stabs continuation */
+	      {
+		char *stabstring = debug_info->ss + fh->issBase + sh.iss;
+		int len = strlen (stabstring);
+		while (stabstring[len-1] == '\\')
+		  {
+		    SYMR sh2;
+		    char *stabstring1 = stabstring;
+		    char *stabstring2;
+		    int len2;
+
+		    /* Ignore continuation char from 1st string */
+		    len--;
+
+		    /* Read next stabstring */
+		    cur_sdx++;
+		    (*swap_sym_in) (cur_bfd,
+				    (((char *) debug_info->external_sym)
+				     + (fh->isymBase + cur_sdx) 
+				     * external_sym_size),
+				    &sh2);
+		    stabstring2 = debug_info->ss + fh->issBase + sh2.iss;
+		    len2 = strlen (stabstring2);
+
+		    /* Concatinate stabstring2 with stabstring1 */
+		    if (stabstring
+			&& stabstring != debug_info->ss + fh->issBase + sh.iss)
+		      stabstring = xrealloc (stabstring, len + len2 + 1);
+		    else
+		      stabstring = xmalloc (len + len2 + 1);
+		    strcpy (stabstring, stabstring1);
+		    strcpy (stabstring + len, stabstring2);
+		    len += len2;
+		  }
+
+#define SET_NAMESTRING() \
+  namestring = stabstring
+#define CUR_SYMBOL_TYPE type_code
+#define CUR_SYMBOL_VALUE sh.value
+#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
+  pst = save_pst
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set) (void)0
+#define HANDLE_RBRAC(val) \
+  if ((val) > save_pst->texthigh) save_pst->texthigh = (val);
+#include "partial-stab.h"
+
+	        if (stabstring 
+		    && stabstring != debug_info->ss + fh->issBase + sh.iss)
+		  free (stabstring);
+	      }
+	    /* end - Handle continuation */
+	    }
+	}
+      else
+	{
+	  for (cur_sdx = 0; cur_sdx < fh->csym;)
+	    {
+	      char *name;
+	      enum address_class class;
+
+	      (*swap_sym_in) (cur_bfd,
+			      ((char *) debug_info->external_sym
+			       + ((fh->isymBase + cur_sdx)
+				  * external_sym_size)),
+			      &sh);
+
+	      if (ECOFF_IS_STAB (&sh))
+		{
+		  cur_sdx++;
+		  continue;
+		}
+
+	      /* Non absolute static symbols go into the minimal table.  */
+	      if (SC_IS_UNDEF(sh.sc) || sh.sc == scNil
+		  || (sh.index == indexNil
+		      && (sh.st != stStatic || sh.sc == scAbs)))
+		{
+		  /* FIXME, premature? */
+		  cur_sdx++;
+		  continue;
+		}
+
+	      name = debug_info->ss + fh->issBase + sh.iss;
+
+	      switch (sh.sc)
+		{
+		case scText:
+		case scRConst:
+		  /* The value of a stEnd symbol is the displacement from the
+		     corresponding start symbol value, do not relocate it.  */
+		  if (sh.st != stEnd)
+		    sh.value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		  break;
+		case scData:
+		case scSData:
+		case scRData:
+		case scPData:
+		case scXData:
+		  sh.value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+		  break;
+		case scBss:
+		case scSBss:
+		  sh.value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+		  break;
+		}
+
+	      switch (sh.st)
+		{
+		  CORE_ADDR high;
+		  CORE_ADDR procaddr;
+		  int new_sdx;
+
+		case stStaticProc:
+		  prim_record_minimal_symbol_and_info (name, sh.value,
+						       mst_file_text, NULL,
+						       SECT_OFF_TEXT, NULL,
+						       objfile);
+
+		  /* FALLTHROUGH */
+
+		case stProc:
+		  /* Usually there is a local and a global stProc symbol
+		     for a function. This means that the function name
+		     has already been entered into the mimimal symbol table
+		     while processing the global symbols in pass 2 above.
+		     One notable exception is the PROGRAM name from
+		     f77 compiled executables, it is only put out as
+		     local stProc symbol, and a global MAIN__ stProc symbol
+		     points to it.  It doesn't matter though, as gdb is
+		     still able to find the PROGRAM name via the partial
+		     symbol table, and the MAIN__ symbol via the minimal
+		     symbol table.  */
+		  if (sh.st == stProc)
+		    add_psymbol_to_list (name, strlen (name),
+					 VAR_NAMESPACE, LOC_BLOCK,
+					 &objfile->global_psymbols,
+					 0, sh.value, psymtab_language, objfile);
+		  else
+		    add_psymbol_to_list (name, strlen (name),
+					 VAR_NAMESPACE, LOC_BLOCK,
+					 &objfile->static_psymbols,
+					 0, sh.value, psymtab_language, objfile);
+
+		  /* Skip over procedure to next one. */
+		  if (sh.index >= hdr->iauxMax)
+		    {
+		      /* Should not happen, but does when cross-compiling
+			   with the MIPS compiler.  FIXME -- pull later.  */
+		      complain (&index_complaint, name);
+		      new_sdx = cur_sdx + 1;	/* Don't skip at all */
+		    }
+		  else
+		    new_sdx = AUX_GET_ISYM (fh->fBigendian,
+					    (debug_info->external_aux
+					     + fh->iauxBase
+					     + sh.index));
+		  procaddr = sh.value;
+
+		  if (new_sdx <= cur_sdx)
+		    {
+		      /* This should not happen either... FIXME.  */
+		      complain (&aux_index_complaint, name);
+		      new_sdx = cur_sdx + 1;	/* Don't skip backward */
+		    }
+
+		  cur_sdx = new_sdx;
+		  (*swap_sym_in) (cur_bfd,
+				  ((char *) debug_info->external_sym
+				   + ((fh->isymBase + cur_sdx - 1)
+				      * external_sym_size)),
+				  &sh);
+		  if (sh.st != stEnd)
+		    continue;
+
+		  /* Kludge for Irix 5.2 zero fh->adr.  */
+		  if (!relocatable
+		      && (pst->textlow == 0 || procaddr < pst->textlow))
+		    pst->textlow = procaddr;
+
+		  high = procaddr + sh.value;
+		  if (high > pst->texthigh)
+		    pst->texthigh = high;
+		  continue;
+
+		case stStatic:	/* Variable */
+          	  if (SC_IS_DATA (sh.sc))
+		    prim_record_minimal_symbol_and_info (name, sh.value,
+							 mst_file_data, NULL,
+							 SECT_OFF_DATA,
+							 NULL,
+							 objfile);
+		  else
+		    prim_record_minimal_symbol_and_info (name, sh.value,
+							 mst_file_bss, NULL,
+							 SECT_OFF_BSS,
+							 NULL,
+							 objfile);
+		  class = LOC_STATIC;
+		  break;
+
+		case stIndirect:/* Irix5 forward declaration */
+		  /* Skip forward declarations from Irix5 cc */
+		  goto skip;
+
+		case stTypedef:/* Typedef */
+		  /* Skip typedefs for forward declarations and opaque
+		     structs from alpha and mips cc.  */
+		  if (sh.iss == 0 || has_opaque_xref (fh, &sh))
+		    goto skip;
+		  class = LOC_TYPEDEF;
+		  break;
+
+		case stConstant:	/* Constant decl */
+		  class = LOC_CONST;
+		  break;
+
+		case stUnion:
+		case stStruct:
+		case stEnum:
+		case stBlock:	/* { }, str, un, enum*/
+		  /* Do not create a partial symbol for cc unnamed aggregates
+		     and gcc empty aggregates. */
+		  if ((sh.sc == scInfo
+		       || SC_IS_COMMON(sh.sc))
+		      && sh.iss != 0
+		      && sh.index != cur_sdx + 2)
+		    {
+		      add_psymbol_to_list (name, strlen (name),
+					   STRUCT_NAMESPACE, LOC_TYPEDEF,
+					   &objfile->static_psymbols,
+					   0, (CORE_ADDR) 0,
+					   psymtab_language, objfile);
+		    }
+		  handle_psymbol_enumerators (objfile, fh, sh.st, sh.value);
+
+		  /* Skip over the block */
+		  new_sdx = sh.index;
+		  if (new_sdx <= cur_sdx)
+		    {
+		      /* This happens with the Ultrix kernel. */
+		      complain (&block_index_complaint, name);
+		      new_sdx = cur_sdx + 1;	/* Don't skip backward */
+		    }
+		  cur_sdx = new_sdx;
+		  continue;
+
+		case stFile:	/* File headers */
+		case stLabel:	/* Labels */
+		case stEnd:	/* Ends of files */
+		  goto skip;
+
+		case stLocal:	/* Local variables */
+		  /* Normally these are skipped because we skip over
+		     all blocks we see.  However, these can occur
+		     as visible symbols in a .h file that contains code. */
+		  goto skip;
+
+		default:
+		  /* Both complaints are valid:  one gives symbol name,
+		     the other the offending symbol type.  */
+		  complain (&unknown_sym_complaint, name);
+		  complain (&unknown_st_complaint, sh.st);
+		  cur_sdx++;
+		  continue;
+		}
+	      /* Use this gdb symbol */
+	      add_psymbol_to_list (name, strlen (name),
+				   VAR_NAMESPACE, class,
+				   &objfile->static_psymbols,
+				   0, sh.value, psymtab_language, objfile);
+	    skip:
+	      cur_sdx++;	/* Go to next file symbol */
+	    }
+
+	  /* Now do enter the external symbols. */
+	  ext_ptr = &extern_tab[fdr_to_pst[f_idx].globals_offset];
+	  cur_sdx = fdr_to_pst[f_idx].n_globals;
+	  PST_PRIVATE (save_pst)->extern_count = cur_sdx;
+	  PST_PRIVATE (save_pst)->extern_tab = ext_ptr;
+	  for (; --cur_sdx >= 0; ext_ptr++)
+	    {
+	      enum address_class class;
+	      SYMR *psh;
+	      char *name;
+	      CORE_ADDR svalue;
+
+	      if (ext_ptr->ifd != f_idx)
+		abort ();
+	      psh = &ext_ptr->asym;
+
+	      /* Do not add undefined symbols to the partial symbol table.  */
+	      if (SC_IS_UNDEF(psh->sc) || psh->sc == scNil)
+		continue;
+
+	      svalue = psh->value;
+	      switch (psh->sc)
+		{
+		case scText:
+		case scRConst:
+		  svalue += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		  break;
+		case scData:
+		case scSData:
+		case scRData:
+		case scPData:
+		case scXData:
+		  svalue += ANOFFSET (section_offsets, SECT_OFF_DATA);
+		  break;
+		case scBss:
+		case scSBss:
+		  svalue += ANOFFSET (section_offsets, SECT_OFF_BSS);
+		  break;
+		}
+
+	      switch (psh->st)
+		{
+		case stNil:
+		  /* These are generated for static symbols in .o files,
+		     ignore them.  */
+		  continue;
+		case stProc:
+		case stStaticProc:
+		  /* External procedure symbols have been entered
+		     into the minimal symbol table in pass 2 above.
+		     Ignore them, as parse_external will ignore them too.  */
+		  continue;
+		case stLabel:
+		  class = LOC_LABEL;
+		  break;
+		default:
+		  complain (&unknown_ext_complaint,
+			    debug_info->ssext + psh->iss);
+		  /* Fall through, pretend it's global.  */
+		case stGlobal:
+		  /* Global common symbols are resolved by the runtime loader,
+		     ignore them.  */
+		  if (SC_IS_COMMON(psh->sc))
+		    continue;
+
+		  class = LOC_STATIC;
+		  break;
+		}
+	      name = debug_info->ssext + psh->iss;
+	      add_psymbol_to_list (name, strlen (name),
+				   VAR_NAMESPACE, class,
+				   &objfile->global_psymbols,
+				   0, svalue,
+				   psymtab_language, objfile);
+	    }
+	}
+
+      /* Link pst to FDR. end_psymtab returns NULL if the psymtab was
+	 empty and put on the free list.  */
+      fdr_to_pst[f_idx].pst = end_psymtab (save_pst,
+					   psymtab_include_list, includes_used,
+					   -1, save_pst->texthigh,
+					   dependency_list, dependencies_used, textlow_not_set);
+      includes_used = 0;
+      dependencies_used = 0;
+
+      if (objfile->ei.entry_point >= save_pst->textlow &&
+	  objfile->ei.entry_point < save_pst->texthigh)
+	{
+	  objfile->ei.entry_file_lowpc = save_pst->textlow;
+	  objfile->ei.entry_file_highpc = save_pst->texthigh;
+	}
+
+      /* The objfile has its functions reordered if this partial symbol
+	 table overlaps any other partial symbol table.
+	 We cannot assume a reordered objfile if a partial symbol table
+	 is contained within another partial symbol table, as partial symbol
+	 tables for include files with executable code are contained
+	 within the partial symbol table for the including source file,
+	 and we do not want to flag the objfile reordered for these cases.
+
+	 This strategy works well for Irix-5.2 shared libraries, but we
+	 might have to use a more elaborate (and slower) algorithm for
+	 other cases.  */
+      save_pst = fdr_to_pst[f_idx].pst;
+      if (save_pst != NULL
+	  && save_pst->textlow != 0
+	  && !(objfile->flags & OBJF_REORDERED))
+	{
+	  ALL_OBJFILE_PSYMTABS (objfile, pst)
+	    {
+	      if (save_pst != pst
+		  && save_pst->textlow >= pst->textlow
+		  && save_pst->textlow < pst->texthigh
+		  && save_pst->texthigh > pst->texthigh)
+		{
+		  objfile->flags |= OBJF_REORDERED;
+		  break;
+		}
+	    }
+	}
+    }
+
+  /* Now scan the FDRs for dependencies */
+  for (f_idx = 0; f_idx < hdr->ifdMax; f_idx++)
+    {
+      fh = f_idx + debug_info->fdr;
+      pst = fdr_to_pst[f_idx].pst;
+
+      if (pst == (struct partial_symtab *)NULL)
+	continue;
+
+      /* This should catch stabs-in-ecoff. */
+      if (fh->crfd <= 1)
+	continue;
+
+      /* Skip the first file indirect entry as it is a self dependency
+	 for source files or a reverse .h -> .c dependency for header files.  */
+      pst->number_of_dependencies = 0;
+      pst->dependencies =
+	((struct partial_symtab **)
+	 obstack_alloc (&objfile->psymbol_obstack,
+			((fh->crfd - 1)
+			 * sizeof (struct partial_symtab *))));
+      for (s_idx = 1; s_idx < fh->crfd; s_idx++)
+	{
+	  RFDT rh;
+
+	  (*swap_rfd_in) (cur_bfd,
+			  ((char *) debug_info->external_rfd
+			   + (fh->rfdBase + s_idx) * external_rfd_size),
+			  &rh);
+	  if (rh < 0 || rh >= hdr->ifdMax)
+	    {
+	      complain (&bad_file_number_complaint, rh);
+	      continue;
+	    }
+
+	  /* Skip self dependencies of header files.  */
+	  if (rh == f_idx)
+	    continue;
+
+	  /* Do not add to dependeny list if psymtab was empty.  */
+	  if (fdr_to_pst[rh].pst == (struct partial_symtab *)NULL)
+	    continue;
+	  pst->dependencies[pst->number_of_dependencies++] = fdr_to_pst[rh].pst;
+	}
+    }
+
+  /* Remove the dummy psymtab created for -O3 images above, if it is
+     still empty, to enable the detection of stripped executables.  */
+  if (objfile->psymtabs->next == NULL
+      && objfile->psymtabs->number_of_dependencies == 0
+      && objfile->psymtabs->n_global_syms == 0
+      && objfile->psymtabs->n_static_syms == 0)
+    objfile->psymtabs = NULL;
+  do_cleanups (old_chain);
+}
+
+/* If the current psymbol has an enumerated type, we need to add
+   all the the enum constants to the partial symbol table.  */
+
+static void
+handle_psymbol_enumerators (objfile, fh, stype, svalue)
+     struct objfile *objfile;
+     FDR *fh;
+     int stype;
+     CORE_ADDR svalue;
+{
+  const bfd_size_type external_sym_size = debug_swap->external_sym_size;
+  void (* const swap_sym_in) PARAMS ((bfd *, PTR, SYMR *))
+    = debug_swap->swap_sym_in;
+  char *ext_sym = ((char *) debug_info->external_sym
+		  + ((fh->isymBase + cur_sdx + 1) * external_sym_size));
+  SYMR sh;
+  TIR tir;
+
+  switch (stype)
+    {
+    case stEnum:
+      break;
+
+    case stBlock:
+      /* It is an enumerated type if the next symbol entry is a stMember
+	 and its auxiliary index is indexNil or its auxiliary entry
+	 is a plain btNil or btVoid.
+	 Alpha cc -migrate enums are recognized by a zero index and
+	 a zero symbol value.
+	 DU 4.0 cc enums are recognized by a member type of btEnum without
+	 qualifiers and a zero symbol value.  */
+      (*swap_sym_in) (cur_bfd, ext_sym, &sh);
+      if (sh.st != stMember)
+	return;
+
+      if (sh.index == indexNil
+	  || (sh.index == 0 && svalue == 0))
+	break;
+      (*debug_swap->swap_tir_in) (fh->fBigendian,
+				  &(debug_info->external_aux
+				    + fh->iauxBase + sh.index)->a_ti,
+				  &tir);
+      if ((tir.bt != btNil
+	   && tir.bt != btVoid
+	   && (tir.bt != btEnum || svalue != 0))
+	  || tir.tq0 != tqNil)
+	return;
+      break;
+
+    default:
+      return;
+    }
+
+  for (;;)
+    {
+      char *name;
+
+      (*swap_sym_in) (cur_bfd, ext_sym, &sh);
+      if (sh.st != stMember)
+	break;
+      name = debug_info->ss + cur_fdr->issBase + sh.iss;
+
+      /* Note that the value doesn't matter for enum constants
+	 in psymtabs, just in symtabs.  */
+      add_psymbol_to_list (name, strlen (name),
+			   VAR_NAMESPACE, LOC_CONST,
+			   &objfile->static_psymbols, 0,
+			   (CORE_ADDR) 0, psymtab_language, objfile);
+      ext_sym += external_sym_size;
+    }
+}
+
+static char *
+mdebug_next_symbol_text (objfile)
+     struct objfile *objfile;	/* argument objfile is currently unused */
+{
+  SYMR sh;
+
+  cur_sdx++;
+  (*debug_swap->swap_sym_in) (cur_bfd,
+			      ((char *) debug_info->external_sym
+			       + ((cur_fdr->isymBase + cur_sdx)
+				  * debug_swap->external_sym_size)),
+			      &sh);
+  return debug_info->ss + cur_fdr->issBase + sh.iss;
+}
+
+/* Ancillary function to psymtab_to_symtab().  Does all the work
+   for turning the partial symtab PST into a symtab, recurring
+   first on all dependent psymtabs.  The argument FILENAME is
+   only passed so we can see in debug stack traces what file
+   is being read.
+
+   This function has a split personality, based on whether the
+   symbol table contains ordinary ecoff symbols, or stabs-in-ecoff.
+   The flow of control and even the memory allocation differs.  FIXME.  */
+
+static void
+psymtab_to_symtab_1 (pst, filename)
+     struct partial_symtab *pst;
+     char *filename;
+{
+  bfd_size_type external_sym_size;
+  bfd_size_type external_pdr_size;
+  void (*swap_sym_in) PARAMS ((bfd *, PTR, SYMR *));
+  void (*swap_pdr_in) PARAMS ((bfd *, PTR, PDR *));
+  int i;
+  struct symtab *st;
+  FDR *fh;
+  struct linetable *lines;
+  CORE_ADDR lowest_pdr_addr = 0;
+
+  if (pst->readin)
+    return;
+  pst->readin = 1;
+
+  /* Read in all partial symbtabs on which this one is dependent.
+     NOTE that we do have circular dependencies, sigh.  We solved
+     that by setting pst->readin before this point.  */
+
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...",
+			     pst->dependencies[i]->filename);
+	    wrap_here ("");	/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	/* We only pass the filename for debug purposes */
+	psymtab_to_symtab_1 (pst->dependencies[i],
+			     pst->dependencies[i]->filename);
+      }
+
+  /* Do nothing if this is a dummy psymtab.  */
+
+  if (pst->n_global_syms == 0 && pst->n_static_syms == 0
+      && pst->textlow == 0 && pst->texthigh == 0)
+    return;
+
+  /* Now read the symbols for this symtab */
+
+  cur_bfd = CUR_BFD (pst);
+  debug_swap = DEBUG_SWAP (pst);
+  debug_info = DEBUG_INFO (pst);
+  pending_list = PENDING_LIST (pst);
+  external_sym_size = debug_swap->external_sym_size;
+  external_pdr_size = debug_swap->external_pdr_size;
+  swap_sym_in = debug_swap->swap_sym_in;
+  swap_pdr_in = debug_swap->swap_pdr_in;
+  current_objfile = pst->objfile;
+  cur_fd = FDR_IDX (pst);
+  fh = ((cur_fd == -1)
+	? (FDR *) NULL
+	: debug_info->fdr + cur_fd);
+  cur_fdr = fh;
+
+  /* See comment in parse_partial_symbols about the @stabs sentinel. */
+  processing_gcc_compilation = 0;
+  if (fh != (FDR *) NULL && fh->csym >= 2)
+    {
+      SYMR sh;
+
+      (*swap_sym_in) (cur_bfd,
+		      ((char *) debug_info->external_sym
+		       + (fh->isymBase + 1) * external_sym_size),
+		      &sh);
+      if (STREQ (debug_info->ss + fh->issBase + sh.iss,
+		 stabs_symbol))
+	{
+	  /* We indicate that this is a GCC compilation so that certain
+	     features will be enabled in stabsread/dbxread.  */
+	  processing_gcc_compilation = 2;
+	}
+    }
+
+  if (processing_gcc_compilation != 0)
+    {
+
+      /* This symbol table contains stabs-in-ecoff entries.  */
+
+      /* Parse local symbols first */
+
+      if (fh->csym <= 2)	/* FIXME, this blows psymtab->symtab ptr */
+	{
+	  current_objfile = NULL;
+	  return;
+	}
+      for (cur_sdx = 2; cur_sdx < fh->csym; cur_sdx++)
+	{
+	  SYMR sh;
+	  char *name;
+	  CORE_ADDR valu;
+
+	  (*swap_sym_in) (cur_bfd,
+			  (((char *) debug_info->external_sym)
+			   + (fh->isymBase + cur_sdx) * external_sym_size),
+			  &sh);
+	  name = debug_info->ss + fh->issBase + sh.iss;
+	  valu = sh.value;
+	  /* XXX This is a hack.  It will go away!  */
+	  if (ECOFF_IS_STAB (&sh) || (name[0] == '#'))
+	    {
+	      int type_code = ECOFF_UNMARK_STAB (sh.index);
+
+	      /* We should never get non N_STAB symbols here, but they
+		 should be harmless, so keep process_one_symbol from
+		 complaining about them.  */
+	      if (type_code & N_STAB)
+		{
+		  process_one_symbol (type_code, 0, valu, name,
+				      pst->section_offsets, pst->objfile);
+		}
+	      /* Similarly a hack.  */
+	      else if (name[0] == '#')
+		{
+		  process_one_symbol (N_SLINE, 0, valu, name,
+				      pst->section_offsets, pst->objfile);
+		}
+	      if (type_code == N_FUN)
+		{
+		  /* Make up special symbol to contain
+		     procedure specific info */
+		  struct mips_extra_func_info *e =
+		    ((struct mips_extra_func_info *)
+		     obstack_alloc (&current_objfile->symbol_obstack,
+				    sizeof (struct mips_extra_func_info)));
+		  struct symbol *s = new_symbol (MIPS_EFI_SYMBOL_NAME);
+
+		  memset ((PTR) e, 0, sizeof (struct mips_extra_func_info));
+		  SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
+		  SYMBOL_CLASS (s) = LOC_CONST;
+		  SYMBOL_TYPE (s) = mdebug_type_void;
+		  SYMBOL_VALUE (s) = (long) e;
+		  e->pdr.framereg = -1;
+		  add_symbol_to_list (s, &local_symbols);
+		}
+	    }
+	  else if (sh.st == stLabel)
+	    {
+	      if (sh.index == indexNil)
+		{
+		  /* This is what the gcc2_compiled and __gnu_compiled_*
+		     show up as.  So don't complain.  */
+		  ;
+		}
+	      else
+		{
+		  /* Handle encoded stab line number. */
+		  valu += ANOFFSET (pst->section_offsets, SECT_OFF_TEXT);
+		  record_line (current_subfile, sh.index, valu);
+		}
+	    }
+	  else if (sh.st == stProc || sh.st == stStaticProc
+		   || sh.st == stStatic || sh.st == stEnd)
+	    /* These are generated by gcc-2.x, do not complain */
+	    ;
+	  else
+	    complain (&stab_unknown_complaint, name);
+	}
+      st = end_symtab (pst->texthigh, pst->objfile, SECT_OFF_TEXT);
+      end_stabs ();
+
+      /* Sort the symbol table now, we are done adding symbols to it.
+	 We must do this before parse_procedure calls lookup_symbol.  */
+      sort_symtab_syms (st);
+
+      /* There used to be a call to sort_blocks here, but this should not
+	 be necessary for stabs symtabs.  And as sort_blocks modifies the
+	 start address of the GLOBAL_BLOCK to the FIRST_LOCAL_BLOCK,
+	 it did the wrong thing if the first procedure in a file was
+	 generated via asm statements.  */
+
+      /* Fill in procedure info next.  */
+      if (fh->cpd > 0)
+	{
+	  PDR *pr_block;
+	  struct cleanup *old_chain;
+	  char *pdr_ptr;
+	  char *pdr_end;
+	  PDR *pdr_in;
+	  PDR *pdr_in_end;
+
+	  pr_block = (PDR *) xmalloc (fh->cpd * sizeof (PDR));
+	  old_chain = make_cleanup (free, pr_block);
+
+	  pdr_ptr = ((char *) debug_info->external_pdr
+		     + fh->ipdFirst * external_pdr_size);
+	  pdr_end = pdr_ptr + fh->cpd * external_pdr_size;
+	  pdr_in = pr_block;
+	  for (;
+	       pdr_ptr < pdr_end;
+	       pdr_ptr += external_pdr_size, pdr_in++)
+	    {
+	      (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in);
+
+	      /* Determine lowest PDR address, the PDRs are not always
+		 sorted.  */
+	      if (pdr_in == pr_block)
+		lowest_pdr_addr = pdr_in->adr;
+	      else if (pdr_in->adr < lowest_pdr_addr)
+		lowest_pdr_addr = pdr_in->adr;
+	    }
+
+	  pdr_in = pr_block;
+	  pdr_in_end = pdr_in + fh->cpd;
+	  for (; pdr_in < pdr_in_end; pdr_in++)
+	    parse_procedure (pdr_in, st, pst);
+
+	  do_cleanups (old_chain);
+	}
+    }
+  else
+    {
+      /* This symbol table contains ordinary ecoff entries.  */
+
+      int f_max;
+      int maxlines;
+      EXTR *ext_ptr;
+
+      /* How many symbols will we need */
+      /* FIXME, this does not count enum values. */
+      f_max = pst->n_global_syms + pst->n_static_syms;
+      if (fh == 0)
+	{
+	  maxlines = 0;
+	  st = new_symtab ("unknown", f_max, 0, pst->objfile);
+	}
+      else
+	{
+	  f_max += fh->csym + fh->cpd;
+	  maxlines = 2 * fh->cline;
+	  st = new_symtab (pst->filename, 2 * f_max, maxlines, pst->objfile);
+
+	  /* The proper language was already determined when building
+	     the psymtab, use it.  */
+	  st->language = PST_PRIVATE (pst)->pst_language;
+	}
+
+      psymtab_language = st->language;
+
+      lines = LINETABLE (st);
+
+      /* Get a new lexical context */
+
+      push_parse_stack ();
+      top_stack->cur_st = st;
+      top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (st),
+						STATIC_BLOCK);
+      BLOCK_START (top_stack->cur_block) = pst->textlow;
+      BLOCK_END (top_stack->cur_block) = 0;
+      top_stack->blocktype = stFile;
+      top_stack->maxsyms = 2 * f_max;
+      top_stack->cur_type = 0;
+      top_stack->procadr = 0;
+      top_stack->numargs = 0;
+      found_ecoff_debugging_info = 0;
+
+      if (fh)
+	{
+	  char *sym_ptr;
+	  char *sym_end;
+
+	  /* Parse local symbols first */
+	  sym_ptr = ((char *) debug_info->external_sym
+		     + fh->isymBase * external_sym_size);
+	  sym_end = sym_ptr + fh->csym * external_sym_size;
+	  while (sym_ptr < sym_end)
+	    {
+	      SYMR sh;
+	      int c;
+
+	      (*swap_sym_in) (cur_bfd, sym_ptr, &sh);
+	      c = parse_symbol (&sh,
+				debug_info->external_aux + fh->iauxBase,
+				sym_ptr, fh->fBigendian, pst->section_offsets);
+	      sym_ptr += c * external_sym_size;
+	    }
+
+	  /* Linenumbers.  At the end, check if we can save memory.
+	     parse_lines has to look ahead an arbitrary number of PDR
+	     structures, so we swap them all first.  */
+	  if (fh->cpd > 0)
+	    {
+	      PDR *pr_block;
+	      struct cleanup *old_chain;
+	      char *pdr_ptr;
+	      char *pdr_end;
+	      PDR *pdr_in;
+	      PDR *pdr_in_end;
+
+	      pr_block = (PDR *) xmalloc (fh->cpd * sizeof (PDR));
+
+	      old_chain = make_cleanup (free, pr_block);
+
+	      pdr_ptr = ((char *) debug_info->external_pdr
+			 + fh->ipdFirst * external_pdr_size);
+	      pdr_end = pdr_ptr + fh->cpd * external_pdr_size;
+	      pdr_in = pr_block;
+	      for (;
+		   pdr_ptr < pdr_end;
+		   pdr_ptr += external_pdr_size, pdr_in++)
+		{
+		  (*swap_pdr_in) (cur_bfd, pdr_ptr, pdr_in);
+
+		  /* Determine lowest PDR address, the PDRs are not always
+		     sorted.  */
+		  if (pdr_in == pr_block)
+		    lowest_pdr_addr = pdr_in->adr;
+		  else if (pdr_in->adr < lowest_pdr_addr)
+		    lowest_pdr_addr = pdr_in->adr;
+		}
+
+	      parse_lines (fh, pr_block, lines, maxlines, pst, lowest_pdr_addr);
+	      if (lines->nitems < fh->cline)
+		lines = shrink_linetable (lines);
+
+	      /* Fill in procedure info next.  */
+	      pdr_in = pr_block;
+	      pdr_in_end = pdr_in + fh->cpd;
+	      for (; pdr_in < pdr_in_end; pdr_in++)
+		parse_procedure (pdr_in, 0, pst);
+
+	      do_cleanups (old_chain);
+	    }
+	}
+
+      LINETABLE (st) = lines;
+
+      /* .. and our share of externals.
+	 XXX use the global list to speed up things here. how?
+	 FIXME, Maybe quit once we have found the right number of ext's? */
+      top_stack->cur_st = st;
+      top_stack->cur_block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (top_stack->cur_st),
+						GLOBAL_BLOCK);
+      top_stack->blocktype = stFile;
+      top_stack->maxsyms
+	= (debug_info->symbolic_header.isymMax
+	   + debug_info->symbolic_header.ipdMax
+	   + debug_info->symbolic_header.iextMax);
+
+      ext_ptr = PST_PRIVATE (pst)->extern_tab;
+      for (i = PST_PRIVATE (pst)->extern_count; --i >= 0; ext_ptr++)
+	parse_external (ext_ptr, fh->fBigendian, pst->section_offsets);
+
+      /* If there are undefined symbols, tell the user.
+	 The alpha has an undefined symbol for every symbol that is
+	 from a shared library, so tell the user only if verbose is on.  */
+      if (info_verbose && n_undef_symbols)
+	{
+	  printf_filtered ("File %s contains %d unresolved references:",
+			   st->filename, n_undef_symbols);
+	  printf_filtered ("\n\t%4d variables\n\t%4d procedures\n\t%4d labels\n",
+			   n_undef_vars, n_undef_procs, n_undef_labels);
+	  n_undef_symbols = n_undef_labels = n_undef_vars = n_undef_procs = 0;
+
+	}
+      pop_parse_stack ();
+
+      st->primary = 1;
+
+      /* Sort the symbol table now, we are done adding symbols to it.*/
+      sort_symtab_syms (st);
+
+      sort_blocks (st);
+    }
+
+  /* Now link the psymtab and the symtab.  */
+  pst->symtab = st;
+
+  current_objfile = NULL;
+}
+
+/* Ancillary parsing procedures. */
+
+/* Return 1 if the symbol pointed to by SH has a cross reference
+   to an opaque aggregate type, else 0.  */
+
+static int
+has_opaque_xref (fh, sh)
+     FDR *fh;
+     SYMR *sh;
+{
+  TIR tir;
+  union aux_ext *ax;
+  RNDXR rn[1];
+  unsigned int rf;
+
+  if (sh->index == indexNil)
+    return 0;
+
+  ax = debug_info->external_aux + fh->iauxBase + sh->index;
+  (*debug_swap->swap_tir_in) (fh->fBigendian, &ax->a_ti, &tir);
+  if (tir.bt != btStruct && tir.bt != btUnion && tir.bt != btEnum)
+    return 0;
+
+  ax++;
+  (*debug_swap->swap_rndx_in) (fh->fBigendian, &ax->a_rndx, rn);
+  if (rn->rfd == 0xfff)
+    rf = AUX_GET_ISYM (fh->fBigendian, ax + 1);
+  else
+    rf = rn->rfd;
+  if (rf != -1)
+    return 0;
+  return 1;
+}
+
+/* Lookup the type at relative index RN.  Return it in TPP
+   if found and in any event come up with its name PNAME.
+   BIGEND says whether aux symbols are big-endian or not (from fh->fBigendian).
+   Return value says how many aux symbols we ate. */
+
+static int
+cross_ref (fd, ax, tpp, type_code, pname, bigend, sym_name)
+     int fd;
+     union aux_ext *ax;
+     struct type **tpp;
+     enum type_code type_code;	/* Use to alloc new type if none is found. */
+     char **pname;
+     int bigend;
+     char *sym_name;
+{
+  RNDXR rn[1];
+  unsigned int rf;
+  int result = 1;
+  FDR *fh;
+  char *esh;
+  SYMR sh;
+  int xref_fd;
+  struct mdebug_pending *pend;
+
+  *tpp = (struct type *)NULL;
+
+  (*debug_swap->swap_rndx_in) (bigend, &ax->a_rndx, rn);
+
+  /* Escape index means 'the next one' */
+  if (rn->rfd == 0xfff)
+    {
+      result++;
+      rf = AUX_GET_ISYM (bigend, ax + 1);
+    }
+  else
+    {
+      rf = rn->rfd;
+    }
+
+  /* mips cc uses a rf of -1 for opaque struct definitions.
+     Set TYPE_FLAG_STUB for these types so that check_typedef will
+     resolve them if the struct gets defined in another compilation unit.  */
+  if (rf == -1)
+    {
+      *pname = "<undefined>";
+      *tpp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
+      TYPE_FLAGS (*tpp) |= TYPE_FLAG_STUB;
+      return result;
+    }
+
+  /* mips cc uses an escaped rn->index of 0 for struct return types
+     of procedures that were compiled without -g. These will always remain
+     undefined.  */
+  if (rn->rfd == 0xfff && rn->index == 0)
+    {
+      *pname = "<undefined>";
+      return result;
+    }
+
+  /* Find the relative file descriptor and the symbol in it.  */
+  fh = get_rfd (fd, rf);
+  xref_fd = fh - debug_info->fdr;
+
+  if (rn->index >= fh->csym)
+    {
+      /* File indirect entry is corrupt.  */
+      *pname = "<illegal>";
+      complain (&bad_rfd_entry_complaint,
+		sym_name, xref_fd, rn->index);
+      return result;
+    }
+
+  /* If we have processed this symbol then we left a forwarding
+     pointer to the type in the pending list.  If not, we`ll put
+     it in a list of pending types, to be processed later when
+     the file will be.  In any event, we collect the name for the
+     type here.  */
+
+  esh = ((char *) debug_info->external_sym
+	 + ((fh->isymBase + rn->index)
+	    * debug_swap->external_sym_size));
+  (*debug_swap->swap_sym_in) (cur_bfd, esh, &sh);
+
+  /* Make sure that this type of cross reference can be handled.  */
+  if ((sh.sc != scInfo
+       || (sh.st != stBlock && sh.st != stTypedef && sh.st != stIndirect
+	   && sh.st != stStruct && sh.st != stUnion
+	   && sh.st != stEnum))
+      && (sh.st != stBlock || !SC_IS_COMMON(sh.sc)))
+    {
+      /* File indirect entry is corrupt.  */
+      *pname = "<illegal>";
+      complain (&bad_rfd_entry_complaint,
+		sym_name, xref_fd, rn->index);
+      return result;
+    }
+
+  *pname = debug_info->ss + fh->issBase + sh.iss;
+
+  pend = is_pending_symbol (fh, esh);
+  if (pend)
+    *tpp = pend->t;
+  else
+    {
+      /* We have not yet seen this type.  */
+
+      if ((sh.iss == 0 && sh.st == stTypedef) || sh.st == stIndirect)
+	{
+	  TIR tir;
+
+	  /* alpha cc puts out a stTypedef with a sh.iss of zero for
+	     two cases:
+	     a) forward declarations of structs/unions/enums which are not
+		defined in this compilation unit.
+		For these the type will be void. This is a bad design decision
+		as cross referencing across compilation units is impossible
+		due to the missing name.
+	     b) forward declarations of structs/unions/enums/typedefs which
+		are defined later in this file or in another file in the same
+		compilation unit. Irix5 cc uses a stIndirect symbol for this.
+		Simply cross reference those again to get the true type.
+	     The forward references are not entered in the pending list and
+	     in the symbol table.  */
+
+	  (*debug_swap->swap_tir_in) (bigend,
+				      &(debug_info->external_aux
+					+ fh->iauxBase + sh.index)->a_ti,
+				      &tir);
+	  if (tir.tq0 != tqNil)
+	    complain (&illegal_forward_tq0_complaint, sym_name);
+	  switch (tir.bt)
+	    {
+	    case btVoid:
+	      *tpp = init_type (type_code, 0, 0, (char *) NULL,
+				current_objfile);
+    	      *pname = "<undefined>";
+	      break;
+
+	    case btStruct:
+	    case btUnion:
+	    case btEnum:
+	      cross_ref (xref_fd,
+			 (debug_info->external_aux
+			  + fh->iauxBase + sh.index + 1),
+			 tpp, type_code, pname,
+			 fh->fBigendian, sym_name);
+	      break;
+
+	    case btTypedef:
+	      /* Follow a forward typedef. This might recursively
+		 call cross_ref till we get a non typedef'ed type.
+		 FIXME: This is not correct behaviour, but gdb currently
+		 cannot handle typedefs without type copying. Type
+		 copying is impossible as we might have mutual forward
+		 references between two files and the copied type would not
+		 get filled in when we later parse its definition.  */
+	      *tpp = parse_type (xref_fd,
+				 debug_info->external_aux + fh->iauxBase,
+				 sh.index,
+				 (int *)NULL,
+				 fh->fBigendian,
+				 debug_info->ss + fh->issBase + sh.iss);
+	      add_pending (fh, esh, *tpp);
+	      break;
+
+	    default:
+	      complain (&illegal_forward_bt_complaint, tir.bt, sym_name);
+	      *tpp = init_type (type_code, 0, 0, (char *) NULL,
+				current_objfile);
+	      break;
+	    }
+	  return result;
+	}
+      else if (sh.st == stTypedef)
+	{
+	  /* Parse the type for a normal typedef. This might recursively call
+	     cross_ref till we get a non typedef'ed type.
+	     FIXME: This is not correct behaviour, but gdb currently
+	     cannot handle typedefs without type copying. But type copying is
+	     impossible as we might have mutual forward references between
+	     two files and the copied type would not get filled in when
+	     we later parse its definition.   */
+	  *tpp = parse_type (xref_fd,
+			     debug_info->external_aux + fh->iauxBase,
+			     sh.index,
+			     (int *)NULL,
+			     fh->fBigendian,
+			     debug_info->ss + fh->issBase + sh.iss);
+	}
+      else
+	{
+	  /* Cross reference to a struct/union/enum which is defined
+	     in another file in the same compilation unit but that file
+	     has not been parsed yet.
+	     Initialize the type only, it will be filled in when
+	     it's definition is parsed.  */
+	  *tpp = init_type (type_code, 0, 0, (char *) NULL, current_objfile);
+	}
+      add_pending (fh, esh, *tpp);
+    }
+
+  /* We used one auxent normally, two if we got a "next one" rf. */
+  return result;
+}
+
+
+/* Quick&dirty lookup procedure, to avoid the MI ones that require
+   keeping the symtab sorted */
+
+static struct symbol *
+mylookup_symbol (name, block, namespace, class)
+     char *name;
+     register struct block *block;
+     namespace_enum namespace;
+     enum address_class class;
+{
+  register int bot, top, inc;
+  register struct symbol *sym;
+
+  bot = 0;
+  top = BLOCK_NSYMS (block);
+  inc = name[0];
+  while (bot < top)
+    {
+      sym = BLOCK_SYM (block, bot);
+      if (SYMBOL_NAME (sym)[0] == inc
+	  && SYMBOL_NAMESPACE (sym) == namespace
+	  && SYMBOL_CLASS (sym) == class
+	  && strcmp (SYMBOL_NAME (sym), name) == 0)
+	return sym;
+      bot++;
+    }
+  block = BLOCK_SUPERBLOCK (block);
+  if (block)
+    return mylookup_symbol (name, block, namespace, class);
+  return 0;
+}
+
+
+/* Add a new symbol S to a block B.
+   Infrequently, we will need to reallocate the block to make it bigger.
+   We only detect this case when adding to top_stack->cur_block, since
+   that's the only time we know how big the block is.  FIXME.  */
+
+static void
+add_symbol (s, b)
+     struct symbol *s;
+     struct block *b;
+{
+  int nsyms = BLOCK_NSYMS (b)++;
+  struct block *origb;
+  struct parse_stack *stackp;
+
+  if (b == top_stack->cur_block &&
+      nsyms >= top_stack->maxsyms)
+    {
+      complain (&block_overflow_complaint, SYMBOL_NAME (s));
+      /* In this case shrink_block is actually grow_block, since
+		   BLOCK_NSYMS(b) is larger than its current size.  */
+      origb = b;
+      b = shrink_block (top_stack->cur_block, top_stack->cur_st);
+
+      /* Now run through the stack replacing pointers to the
+	 original block.  shrink_block has already done this
+	 for the blockvector and BLOCK_FUNCTION.  */
+      for (stackp = top_stack; stackp; stackp = stackp->next)
+	{
+	  if (stackp->cur_block == origb)
+	    {
+	      stackp->cur_block = b;
+	      stackp->maxsyms = BLOCK_NSYMS (b);
+	    }
+	}
+    }
+  BLOCK_SYM (b, nsyms) = s;
+}
+
+/* Add a new block B to a symtab S */
+
+static void
+add_block (b, s)
+     struct block *b;
+     struct symtab *s;
+{
+  struct blockvector *bv = BLOCKVECTOR (s);
+
+  bv = (struct blockvector *) xrealloc ((PTR) bv,
+					(sizeof (struct blockvector)
+					 + BLOCKVECTOR_NBLOCKS (bv)
+					 * sizeof (bv->block)));
+  if (bv != BLOCKVECTOR (s))
+    BLOCKVECTOR (s) = bv;
+
+  BLOCKVECTOR_BLOCK (bv, BLOCKVECTOR_NBLOCKS (bv)++) = b;
+}
+
+/* Add a new linenumber entry (LINENO,ADR) to a linevector LT.
+   MIPS' linenumber encoding might need more than one byte
+   to describe it, LAST is used to detect these continuation lines.
+
+   Combining lines with the same line number seems like a bad idea.
+   E.g: There could be a line number entry with the same line number after the
+   prologue and GDB should not ignore it (this is a better way to find
+   a prologue than mips_skip_prologue).
+   But due to the compressed line table format there are line number entries
+   for the same line which are needed to bridge the gap to the next
+   line number entry. These entries have a bogus address info with them
+   and we are unable to tell them from intended duplicate line number
+   entries.
+   This is another reason why -ggdb debugging format is preferable.  */
+
+static int
+add_line (lt, lineno, adr, last)
+     struct linetable *lt;
+     int lineno;
+     CORE_ADDR adr;
+     int last;
+{
+  /* DEC c89 sometimes produces zero linenos which confuse gdb.
+     Change them to something sensible. */
+  if (lineno == 0)
+    lineno = 1;
+  if (last == 0)
+    last = -2;			/* make sure we record first line */
+
+  if (last == lineno)		/* skip continuation lines */
+    return lineno;
+
+  lt->item[lt->nitems].line = lineno;
+  lt->item[lt->nitems++].pc = adr << 2;
+  return lineno;
+}
+
+/* Sorting and reordering procedures */
+
+/* Blocks with a smaller low bound should come first */
+
+static int
+compare_blocks (arg1, arg2)
+     const PTR arg1;
+     const PTR arg2;
+{
+  register int addr_diff;
+  struct block **b1 = (struct block **) arg1;
+  struct block **b2 = (struct block **) arg2;
+
+  addr_diff = (BLOCK_START ((*b1))) - (BLOCK_START ((*b2)));
+  if (addr_diff == 0)
+    return (BLOCK_END ((*b2))) - (BLOCK_END ((*b1)));
+  return addr_diff;
+}
+
+/* Sort the blocks of a symtab S.
+   Reorder the blocks in the blockvector by code-address,
+   as required by some MI search routines */
+
+static void
+sort_blocks (s)
+     struct symtab *s;
+{
+  struct blockvector *bv = BLOCKVECTOR (s);
+
+  if (BLOCKVECTOR_NBLOCKS (bv) <= 2)
+    {
+      /* Cosmetic */
+      if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) == 0)
+	BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = 0;
+      if (BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) == 0)
+	BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) = 0;
+      return;
+    }
+  /*
+   * This is very unfortunate: normally all functions are compiled in
+   * the order they are found, but if the file is compiled -O3 things
+   * are very different.  It would be nice to find a reliable test
+   * to detect -O3 images in advance.
+   */
+  if (BLOCKVECTOR_NBLOCKS (bv) > 3)
+    qsort (&BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK),
+	   BLOCKVECTOR_NBLOCKS (bv) - FIRST_LOCAL_BLOCK,
+	   sizeof (struct block *),
+	   compare_blocks);
+
+  {
+    register CORE_ADDR high = 0;
+    register int i, j = BLOCKVECTOR_NBLOCKS (bv);
+
+    for (i = FIRST_LOCAL_BLOCK; i < j; i++)
+      if (high < BLOCK_END (BLOCKVECTOR_BLOCK (bv, i)))
+	high = BLOCK_END (BLOCKVECTOR_BLOCK (bv, i));
+    BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) = high;
+  }
+
+  BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK)) =
+    BLOCK_START (BLOCKVECTOR_BLOCK (bv, FIRST_LOCAL_BLOCK));
+
+  BLOCK_START (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) =
+    BLOCK_START (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
+  BLOCK_END (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)) =
+    BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
+}
+
+
+/* Constructor/restructor/destructor procedures */
+
+/* Allocate a new symtab for NAME.  Needs an estimate of how many symbols
+   MAXSYMS and linenumbers MAXLINES we'll put in it */
+
+static struct symtab *
+new_symtab (name, maxsyms, maxlines, objfile)
+     char *name;
+     int maxsyms;
+     int maxlines;
+     struct objfile *objfile;
+{
+  struct symtab *s = allocate_symtab (name, objfile);
+
+  LINETABLE (s) = new_linetable (maxlines);
+
+  /* All symtabs must have at least two blocks */
+  BLOCKVECTOR (s) = new_bvect (2);
+  BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK) = new_block (maxsyms);
+  BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK) = new_block (maxsyms);
+  BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK)) =
+    BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK);
+
+  s->free_code = free_linetable;
+  s->debugformat = obsavestring ("ECOFF", 5,
+				 &objfile -> symbol_obstack);
+  return (s);
+}
+
+/* Allocate a new partial_symtab NAME */
+
+static struct partial_symtab *
+new_psymtab (name, objfile, section_offsets)
+     char *name;
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+{
+  struct partial_symtab *psymtab;
+
+  psymtab = allocate_psymtab (name, objfile);
+  psymtab->section_offsets = section_offsets;
+
+  /* Keep a backpointer to the file's symbols */
+
+  psymtab->read_symtab_private = ((char *)
+				  obstack_alloc (&objfile->psymbol_obstack,
+						 sizeof (struct symloc)));
+  memset ((PTR) psymtab->read_symtab_private, 0, sizeof (struct symloc));
+  CUR_BFD (psymtab) = cur_bfd;
+  DEBUG_SWAP (psymtab) = debug_swap;
+  DEBUG_INFO (psymtab) = debug_info;
+  PENDING_LIST (psymtab) = pending_list;
+
+  /* The way to turn this into a symtab is to call... */
+  psymtab->read_symtab = mdebug_psymtab_to_symtab;
+  return (psymtab);
+}
+
+
+/* Allocate a linetable array of the given SIZE.  Since the struct
+   already includes one item, we subtract one when calculating the
+   proper size to allocate.  */
+
+static struct linetable *
+new_linetable (size)
+     int size;
+{
+  struct linetable *l;
+
+  size = (size - 1) * sizeof (l->item) + sizeof (struct linetable);
+  l = (struct linetable *) xmalloc (size);
+  l->nitems = 0;
+  return l;
+}
+
+/* Oops, too big. Shrink it.  This was important with the 2.4 linetables,
+   I am not so sure about the 3.4 ones.
+
+   Since the struct linetable already includes one item, we subtract one when
+   calculating the proper size to allocate.  */
+
+static struct linetable *
+shrink_linetable (lt)
+     struct linetable *lt;
+{
+
+  return (struct linetable *) xrealloc ((PTR) lt,
+					(sizeof (struct linetable)
+					 + ((lt->nitems - 1)
+					    * sizeof (lt->item))));
+}
+
+/* Allocate and zero a new blockvector of NBLOCKS blocks. */
+
+static struct blockvector *
+new_bvect (nblocks)
+     int nblocks;
+{
+  struct blockvector *bv;
+  int size;
+
+  size = sizeof (struct blockvector) + nblocks * sizeof (struct block *);
+  bv = (struct blockvector *) xzalloc (size);
+
+  BLOCKVECTOR_NBLOCKS (bv) = nblocks;
+
+  return bv;
+}
+
+/* Allocate and zero a new block of MAXSYMS symbols */
+
+static struct block *
+new_block (maxsyms)
+     int maxsyms;
+{
+  int size = sizeof (struct block) + (maxsyms - 1) * sizeof (struct symbol *);
+
+  return (struct block *) xzalloc (size);
+}
+
+/* Ooops, too big. Shrink block B in symtab S to its minimal size.
+   Shrink_block can also be used by add_symbol to grow a block.  */
+
+static struct block *
+shrink_block (b, s)
+     struct block *b;
+     struct symtab *s;
+{
+  struct block *new;
+  struct blockvector *bv = BLOCKVECTOR (s);
+  int i;
+
+  /* Just reallocate it and fix references to the old one */
+
+  new = (struct block *) xrealloc ((PTR) b,
+				   (sizeof (struct block)
+				    + ((BLOCK_NSYMS (b) - 1)
+				       * sizeof (struct symbol *))));
+
+  /* Should chase pointers to old one.  Fortunately, that`s just
+	   the block`s function and inferior blocks */
+  if (BLOCK_FUNCTION (new) && SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) == b)
+    SYMBOL_BLOCK_VALUE (BLOCK_FUNCTION (new)) = new;
+  for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); i++)
+    if (BLOCKVECTOR_BLOCK (bv, i) == b)
+      BLOCKVECTOR_BLOCK (bv, i) = new;
+    else if (BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (bv, i)) == b)
+      BLOCK_SUPERBLOCK (BLOCKVECTOR_BLOCK (bv, i)) = new;
+  return new;
+}
+
+/* Create a new symbol with printname NAME */
+
+static struct symbol *
+new_symbol (name)
+     char *name;
+{
+  struct symbol *s = ((struct symbol *)
+		      obstack_alloc (&current_objfile->symbol_obstack,
+				     sizeof (struct symbol)));
+
+  memset ((PTR) s, 0, sizeof (*s));
+  SYMBOL_NAME (s) = obsavestring (name, strlen (name),
+				  &current_objfile->symbol_obstack);
+  SYMBOL_LANGUAGE (s) = psymtab_language;
+  SYMBOL_INIT_DEMANGLED_NAME (s, &current_objfile->symbol_obstack);
+  return s;
+}
+
+/* Create a new type with printname NAME */
+
+static struct type *
+new_type (name)
+     char *name;
+{
+  struct type *t;
+
+  t = alloc_type (current_objfile);
+  TYPE_NAME (t) = name;
+  TYPE_CPLUS_SPECIFIC (t) = (struct cplus_struct_type *) &cplus_struct_default;
+  return t;
+}
+
+/* Read ECOFF debugging information from a BFD section.  This is
+   called from elfread.c.  It parses the section into a
+   ecoff_debug_info struct, and then lets the rest of the file handle
+   it as normal.  */
+
+void
+elfmdebug_build_psymtabs (objfile, swap, sec, section_offsets)
+     struct objfile *objfile;
+     const struct ecoff_debug_swap *swap;
+     asection *sec;
+     struct section_offsets *section_offsets;
+{
+  bfd *abfd = objfile->obfd;
+  struct ecoff_debug_info *info;
+
+  info = ((struct ecoff_debug_info *)
+	  obstack_alloc (&objfile->psymbol_obstack,
+			 sizeof (struct ecoff_debug_info)));
+
+  if (!(*swap->read_debug_info) (abfd, sec, info))
+    error ("Error reading ECOFF debugging information: %s",
+	   bfd_errmsg (bfd_get_error ()));
+
+  mdebug_build_psymtabs (objfile, swap, info, section_offsets);
+}
+
+
+/* Things used for calling functions in the inferior.
+   These functions are exported to our companion
+   mips-tdep.c file and are here because they play
+   with the symbol-table explicitly. */
+
+/* Sigtramp: make sure we have all the necessary information
+   about the signal trampoline code. Since the official code
+   from MIPS does not do so, we make up that information ourselves.
+   If they fix the library (unlikely) this code will neutralize itself. */
+
+/* FIXME: This function is called only by mips-tdep.c.  It needs to be
+   here because it calls functions defined in this file, but perhaps
+   this could be handled in a better way.  Only compile it in when
+   tm-mips.h is included. */
+
+#ifdef TM_MIPS_H
+
+void
+fixup_sigtramp ()
+{
+  struct symbol *s;
+  struct symtab *st;
+  struct block *b, *b0 = NULL;
+
+  sigtramp_address = -1;
+
+  /* We have to handle the following cases here:
+     a) The Mips library has a sigtramp label within sigvec.
+     b) Irix has a _sigtramp which we want to use, but it also has sigvec.  */
+  s = lookup_symbol ("sigvec", 0, VAR_NAMESPACE, 0, NULL);
+  if (s != 0)
+    {
+      b0 = SYMBOL_BLOCK_VALUE (s);
+      s = lookup_symbol ("sigtramp", b0, VAR_NAMESPACE, 0, NULL);
+    }
+  if (s == 0)
+    {
+      /* No sigvec or no sigtramp inside sigvec, try _sigtramp.  */
+      s = lookup_symbol ("_sigtramp", 0, VAR_NAMESPACE, 0, NULL);
+    }
+
+  /* But maybe this program uses its own version of sigvec */
+  if (s == 0)
+    return;
+
+  /* Did we or MIPSco fix the library ? */
+  if (SYMBOL_CLASS (s) == LOC_BLOCK)
+    {
+      sigtramp_address = BLOCK_START (SYMBOL_BLOCK_VALUE (s));
+      sigtramp_end = BLOCK_END (SYMBOL_BLOCK_VALUE (s));
+      return;
+    }
+
+  sigtramp_address = SYMBOL_VALUE (s);
+  sigtramp_end = sigtramp_address + 0x88;	/* black magic */
+
+  /* But what symtab does it live in ? */
+  st = find_pc_symtab (SYMBOL_VALUE (s));
+
+  /*
+   * Ok, there goes the fix: turn it into a procedure, with all the
+   * needed info.  Note we make it a nested procedure of sigvec,
+   * which is the way the (assembly) code is actually written.
+   */
+  SYMBOL_NAMESPACE (s) = VAR_NAMESPACE;
+  SYMBOL_CLASS (s) = LOC_BLOCK;
+  SYMBOL_TYPE (s) = init_type (TYPE_CODE_FUNC, 4, 0, (char *) NULL,
+			       st->objfile);
+  TYPE_TARGET_TYPE (SYMBOL_TYPE (s)) = mdebug_type_void;
+
+  /* Need a block to allocate MIPS_EFI_SYMBOL_NAME in */
+  b = new_block (1);
+  SYMBOL_BLOCK_VALUE (s) = b;
+  BLOCK_START (b) = sigtramp_address;
+  BLOCK_END (b) = sigtramp_end;
+  BLOCK_FUNCTION (b) = s;
+  BLOCK_SUPERBLOCK (b) = BLOCK_SUPERBLOCK (b0);
+  add_block (b, st);
+  sort_blocks (st);
+
+  /* Make a MIPS_EFI_SYMBOL_NAME entry for it */
+  {
+    struct mips_extra_func_info *e =
+      ((struct mips_extra_func_info *)
+       xzalloc (sizeof (struct mips_extra_func_info)));
+
+    e->numargs = 0;		/* the kernel thinks otherwise */
+    e->pdr.frameoffset = 32;
+    e->pdr.framereg = SP_REGNUM;
+    /* Note that setting pcreg is no longer strictly necessary as
+       mips_frame_saved_pc is now aware of signal handler frames.  */
+    e->pdr.pcreg = PC_REGNUM;
+    e->pdr.regmask = -2;
+    /* Offset to saved r31, in the sigtramp case the saved registers
+       are above the frame in the sigcontext.
+       We have 4 alignment bytes, 12 bytes for onstack, mask and pc,
+       32 * 4 bytes for the general registers, 12 bytes for mdhi, mdlo, ownedfp
+       and 32 * 4 bytes for the floating point registers.  */
+    e->pdr.regoffset = 4 + 12 + 31 * 4;
+    e->pdr.fregmask = -1;
+    /* Offset to saved f30 (first saved *double* register).  */
+    e->pdr.fregoffset = 4 + 12 + 32 * 4 + 12 + 30 * 4;
+    e->pdr.isym = (long) s;
+    e->pdr.adr = sigtramp_address;
+
+    current_objfile = st->objfile;	/* Keep new_symbol happy */
+    s = new_symbol (MIPS_EFI_SYMBOL_NAME);
+    SYMBOL_VALUE (s) = (long) e;
+    SYMBOL_NAMESPACE (s) = LABEL_NAMESPACE;
+    SYMBOL_CLASS (s) = LOC_CONST;
+    SYMBOL_TYPE (s) = mdebug_type_void;
+    current_objfile = NULL;
+  }
+
+  BLOCK_SYM (b, BLOCK_NSYMS (b)++) = s;
+}
+
+#endif	/* TM_MIPS_H */
+
+void
+_initialize_mdebugread ()
+{
+  mdebug_type_void =
+    init_type (TYPE_CODE_VOID, 1,
+	       0,
+	       "void", (struct objfile *) NULL);
+  mdebug_type_char =
+    init_type (TYPE_CODE_INT, 1,
+	       0,
+	       "char", (struct objfile *) NULL);
+  mdebug_type_unsigned_char =
+    init_type (TYPE_CODE_INT, 1,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned char", (struct objfile *) NULL);
+  mdebug_type_short =
+    init_type (TYPE_CODE_INT, 2,
+	       0,
+	       "short", (struct objfile *) NULL);
+  mdebug_type_unsigned_short =
+    init_type (TYPE_CODE_INT, 2,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned short", (struct objfile *) NULL);
+  mdebug_type_int_32 =
+    init_type (TYPE_CODE_INT, 4,
+	       0,
+	       "int", (struct objfile *) NULL);
+  mdebug_type_unsigned_int_32 =
+    init_type (TYPE_CODE_INT, 4,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned int", (struct objfile *) NULL);
+  mdebug_type_int_64 =
+    init_type (TYPE_CODE_INT, 8,
+	       0,
+	       "int", (struct objfile *) NULL);
+  mdebug_type_unsigned_int_64 =
+    init_type (TYPE_CODE_INT, 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned int", (struct objfile *) NULL);
+  mdebug_type_long_32 =
+    init_type (TYPE_CODE_INT, 4,
+	       0,
+	       "long", (struct objfile *) NULL);
+  mdebug_type_unsigned_long_32 =
+    init_type (TYPE_CODE_INT, 4,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned long", (struct objfile *) NULL);
+  mdebug_type_long_64 =
+    init_type (TYPE_CODE_INT, 8,
+	       0,
+	       "long", (struct objfile *) NULL);
+  mdebug_type_unsigned_long_64 =
+    init_type (TYPE_CODE_INT, 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned long", (struct objfile *) NULL);
+  mdebug_type_long_long_64 =
+    init_type (TYPE_CODE_INT, 8,
+	       0,
+	       "long long", (struct objfile *) NULL);
+  mdebug_type_unsigned_long_long_64 = 
+    init_type (TYPE_CODE_INT, 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "unsigned long long", (struct objfile *) NULL);
+  mdebug_type_adr_32 =
+    init_type (TYPE_CODE_PTR, 4,
+	       TYPE_FLAG_UNSIGNED,
+	       "adr_32", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (mdebug_type_adr_32) = mdebug_type_void;
+  mdebug_type_adr_64 =
+    init_type (TYPE_CODE_PTR, 8,
+	       TYPE_FLAG_UNSIGNED,
+	       "adr_64", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (mdebug_type_adr_64) = mdebug_type_void;
+  mdebug_type_float =
+    init_type (TYPE_CODE_FLT, TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "float", (struct objfile *) NULL);
+  mdebug_type_double =
+    init_type (TYPE_CODE_FLT, TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "double", (struct objfile *) NULL);
+  mdebug_type_complex =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_FLOAT_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "complex", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (mdebug_type_complex) = mdebug_type_float;
+  mdebug_type_double_complex =
+    init_type (TYPE_CODE_COMPLEX, 2 * TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0,
+	       "double complex", (struct objfile *) NULL);
+  TYPE_TARGET_TYPE (mdebug_type_double_complex) = mdebug_type_double;
+
+  /* Is a "string" the way btString means it the same as TYPE_CODE_STRING?
+     FIXME.  */
+  mdebug_type_string =
+    init_type (TYPE_CODE_STRING,
+	       TARGET_CHAR_BIT / TARGET_CHAR_BIT,
+	       0, "string",
+	       (struct objfile *) NULL);
+
+  /* We use TYPE_CODE_INT to print these as integers.  Does this do any
+     good?  Would we be better off with TYPE_CODE_ERROR?  Should
+     TYPE_CODE_ERROR print things in hex if it knows the size?  */
+  mdebug_type_fixed_dec =
+    init_type (TYPE_CODE_INT,
+	       TARGET_INT_BIT / TARGET_CHAR_BIT,
+	       0, "fixed decimal",
+	       (struct objfile *) NULL);
+
+  mdebug_type_float_dec =
+    init_type (TYPE_CODE_ERROR,
+	       TARGET_DOUBLE_BIT / TARGET_CHAR_BIT,
+	       0, "floating decimal",
+	       (struct objfile *) NULL);
+
+  nodebug_func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
+					"<function, no debug info>", NULL);
+  TYPE_TARGET_TYPE (nodebug_func_symbol_type) = mdebug_type_int;
+  nodebug_var_symbol_type =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+	       "<variable, no debug info>", NULL);
+}
diff --git a/gdb/mem-break.c b/gdb/mem-break.c
new file mode 100644
index 0000000..b0a1b4f
--- /dev/null
+++ b/gdb/mem-break.c
@@ -0,0 +1,124 @@
+/* Simulate breakpoints by patching locations in the target system, for GDB.
+   Copyright 1990, 1991, 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by John Gilmore.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+/* This file is only useful if BREAKPOINT is set.  If not, we punt.  */
+
+#include "symtab.h"
+#include "breakpoint.h"
+#include "inferior.h"
+#include "target.h"
+
+
+/* Use the program counter to determine the contents and size
+   of a breakpoint instruction.  If no target-dependent macro
+   BREAKPOINT_FROM_PC has been defined to implement this function,
+   assume that the breakpoint doesn't depend on the PC, and
+   use the values of the BIG_BREAKPOINT and LITTLE_BREAKPOINT macros.
+   Return a pointer to a string of bytes that encode a breakpoint
+   instruction, stores the length of the string to *lenptr,
+   and optionally adjust the pc to point to the correct memory location
+   for inserting the breakpoint.  */
+
+unsigned char *
+memory_breakpoint_from_pc (pcptr, lenptr)
+     CORE_ADDR *pcptr;
+     int *lenptr;
+{
+  /* {BIG_,LITTLE_}BREAKPOINT is the sequence of bytes we insert for a
+     breakpoint.  On some machines, breakpoints are handled by the
+     target environment and we don't have to worry about them here.  */
+#ifdef BIG_BREAKPOINT
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      static unsigned char big_break_insn[] = BIG_BREAKPOINT;
+      *lenptr = sizeof (big_break_insn);
+      return big_break_insn;
+    }
+#endif
+#ifdef LITTLE_BREAKPOINT
+  if (TARGET_BYTE_ORDER != BIG_ENDIAN)
+    {
+      static unsigned char little_break_insn[] = LITTLE_BREAKPOINT;
+      *lenptr = sizeof (little_break_insn);
+      return little_break_insn;
+    }
+#endif
+#ifdef BREAKPOINT
+  {
+    static unsigned char break_insn[] = BREAKPOINT;
+    *lenptr = sizeof (break_insn);
+    return break_insn;
+  }
+#endif
+  *lenptr = 0;
+  return NULL;
+}
+
+
+/* Insert a breakpoint on targets that don't have any better breakpoint
+   support.  We read the contents of the target location and stash it,
+   then overwrite it with a breakpoint instruction.  ADDR is the target
+   location in the target machine.  CONTENTS_CACHE is a pointer to 
+   memory allocated for saving the target contents.  It is guaranteed
+   by the caller to be long enough to save BREAKPOINT_LEN bytes (this
+   is accomplished via BREAKPOINT_MAX).  */
+
+int
+memory_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int val;
+  unsigned char *bp;
+  int bplen;
+
+  /* Determine appropriate breakpoint contents and size for this address.  */
+  bp = BREAKPOINT_FROM_PC (&addr, &bplen);
+  if (bp == NULL)
+    error ("Software breakpoints not implemented for this target.");
+
+  /* Save the memory contents.  */
+  val = target_read_memory (addr, contents_cache, bplen);
+
+  /* Write the breakpoint.  */
+  if (val == 0)
+    val = target_write_memory (addr, (char *)bp, bplen);
+
+  return val;
+}
+
+
+int
+memory_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  unsigned char *bp;
+  int bplen;
+
+  /* Determine appropriate breakpoint contents and size for this address.  */
+  bp = BREAKPOINT_FROM_PC (&addr, &bplen);
+  if (bp == NULL)
+    error ("Software breakpoints not implemented for this target.");
+
+  return target_write_memory (addr, contents_cache, bplen);
+}
diff --git a/gdb/minimon.h b/gdb/minimon.h
new file mode 100644
index 0000000..f60c417
--- /dev/null
+++ b/gdb/minimon.h
@@ -0,0 +1,562 @@
+/* Definitions and macros for support of AMD's remote debugger, MiniMON.
+   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ * Some basic types.  FIXME, this should be done by declaring bitfield
+ * sizes in the structs.  We can't portably depend on a "long int" being
+ * 32 bits, etc.
+ */
+typedef long int INT32;            /* 32 bit integer */
+typedef unsigned long int UINT32;  /* 32 bit integer (unsigned) */
+typedef unsigned long int ADDR32;  /* 32 bit address */
+typedef unsigned long int INST32;  /* 32 bit instruction */
+typedef long int BOOLEAN;          /* Boolean value (32 bit) */
+typedef unsigned char BYTE;        /* byte (8 bit) */
+typedef short int INT16;           /* 16 bit integer */
+typedef unsigned short int UINT16; /* 16 bit integer (unsigned) */
+
+/****************************************************************************/
+/************************* Message Information ******************************/
+/****************************************************************************/
+
+/*
+ * Error codes 
+ */
+
+/* General errors */
+#define EMUSAGE     1  /* Bad args / flags               */
+#define EMFAIL      2  /* Unrecoverable error            */
+#define EMBADADDR   3  /* Illegal address                */
+#define EMBADREG    4  /* Illegal register               */
+#define EMSYNTAX    5  /* Illegal command syntax         */
+#define EMACCESS    6  /* Could not access memory        */
+#define EMALLOC     7  /* Could not allocate memory      */
+#define EMTARGET    8  /* Unknown target type            */
+#define EMHINIT     9  /* Could not initialize host      */
+#define EMCOMM     10  /* Could not open communication channel */
+
+/* Message errors */
+#define EMBADMSG   11  /* Unknown message type           */
+#define EMMSG2BIG  12  /* Message to large for buffer    */
+#define EMNOSEND   13  /* Could not send message         */
+#define EMNORECV   14  /* Could not receive message      */
+
+#define EMRESET    15  /* Could not RESET target         */
+#define EMCONFIG   16  /* Could not get target CONFIG    */
+#define EMSTATUS   17  /* Could not get target STATUS    */
+#define EMREAD     18  /* Could not READ target memory   */
+#define EMWRITE    19  /* Could not WRITE target memory  */
+#define EMBKPTSET  20  /* Could not set breakpoint       */
+#define EMBKPTRM   21  /* Could not remove breakpoint    */
+#define EMBKPTSTAT 22  /* Could not get breakpoint status */
+#define EMBKPTNONE 23  /* All breakpoints in use         */
+#define EMBKPTUSED 24  /* Breakpoints already in use     */
+#define EMCOPY     25  /* Could not COPY target memory   */
+#define EMFILL     26  /* Could not FILL target memory   */
+#define EMINIT     27  /* Could not initialize target memory */
+#define EMGO       28  /* Could not start execution      */
+#define EMSTEP     29  /* Could not single step          */
+#define EMBREAK    30  /* Could not BREAK                */
+#define EMHIF      31  /* Could not perform HIF service  */
+#define EMCHANNEL0 32  /* Could not read CHANNEL0        */
+#define EMCHANNEL1 33  /* Could not write CHANNEL1       */
+
+/* COFF file loader errors */
+#define EMOPEN     34  /* Could not open COFF file       */
+#define EMHDR      35  /* Could not read COFF header     */
+#define EMMAGIC    36  /* Bad magic number               */
+#define EMAOUT     37  /* Could not read COFF a.out header */
+#define EMSCNHDR   38  /* Could not read COFF section header */
+#define EMSCN      39  /* Could not read COFF section    */
+#define EMCLOSE    40  /* Could not close COFF file      */
+
+/* Log file errors */
+#define EMLOGOPEN  41  /* Could not open log file        */
+#define EMLOGREAD  42  /* Could not read log file        */
+#define EMLOGWRITE 43  /* Could not write to log file    */
+#define EMLOGCLOSE 44  /* Could not close log file       */
+
+/* Command file errors */
+#define EMCMDOPEN  45  /* Could not open command file    */
+#define EMCMDREAD  46  /* Could not read command file    */
+#define EMCMDWRITE 47  /* Could not write to command file */
+#define EMCMDCLOSE 48  /* Could not close comand file    */
+
+#define EMTIMEOUT  49  /* Host timed out waiting for a message */
+#define EMCOMMTYPE 50  /* A '-t' flag must be specified  */
+#define EMCOMMERR  51  /* Communication error            */
+#define EMBAUD     52  /* Invalid baud rate specified    */
+/*
+ * Memory Spaces
+ */
+#define LOCAL_REG    0  /* Local processor register     */
+#define GLOBAL_REG   1  /* Global processor register    */
+#define SPECIAL_REG  2  /* Special processor register   */
+#define TLB_REG      3  /* Translation Lookaside Buffer */
+#define COPROC_REG   4  /* Coprocessor register         */
+#define I_MEM        5  /* Instruction Memory           */
+#define D_MEM        6  /* Data Memory                  */
+#define I_ROM        7  /* Instruction ROM              */
+#define D_ROM        8  /* Data ROM                     */
+#define I_O          9  /* Input/Output                 */
+#define I_CACHE     10  /* Instruction Cache            */
+#define D_CACHE     11  /* Data Cache                   */
+
+/* To supress warnings for zero length array definitions */
+#define DUMMY 1
+
+/*
+** Host to target definitions
+*/
+
+#define RESET          0
+#define CONFIG_REQ     1
+#define STATUS_REQ     2
+#define READ_REQ       3
+#define WRITE_REQ      4
+#define BKPT_SET       5
+#define BKPT_RM        6
+#define BKPT_STAT      7
+#define COPY           8
+#define FILL           9
+#define INIT          10
+#define GO            11
+#define STEP          12
+#define BREAK         13
+
+#define HIF_CALL_RTN  64
+#define CHANNEL0      65
+#define CHANNEL1_ACK  66
+
+
+/*
+** Target to host definitions
+*/
+
+#define RESET_ACK     32
+#define CONFIG        33
+#define STATUS        34
+#define READ_ACK      35
+#define WRITE_ACK     36
+#define BKPT_SET_ACK  37
+#define BKPT_RM_ACK   38
+#define BKPT_STAT_ACK 39
+#define COPY_ACK      40
+#define FILL_ACK      41
+#define INIT_ACK      42
+#define HALT          43
+
+#define ERROR         63
+
+#define HIF_CALL      96
+#define CHANNEL0_ACK  97
+#define CHANNEL1      98
+
+
+/* A "generic" message */
+struct generic_msg_t {
+          INT32    code;  /* generic */
+          INT32    length;
+          BYTE     byte[DUMMY];
+};
+
+
+/* A "generic" message (with an INT32 array) */
+struct generic_int32_msg_t {
+          INT32    code;  /* generic */
+          INT32    length;
+          INT32    int32[DUMMY];
+};
+
+
+/*
+** Host to target messages
+*/
+
+struct reset_msg_t {
+          INT32    code;  /* 0 */
+          INT32    length;
+};
+
+
+struct config_req_msg_t {
+          INT32    code;  /* 1 */
+          INT32    length;
+};
+
+
+struct status_req_msg_t {
+          INT32    code;  /* 2 */
+          INT32    length;
+};
+
+
+struct read_req_msg_t {
+          INT32    code;  /* 3 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+};
+
+
+struct write_req_msg_t {
+          INT32    code;  /* 4 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+          BYTE     data[DUMMY];
+};
+
+
+struct write_r_msg_t {
+          INT32    code;  /* 4 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+          INT32    data[DUMMY];
+};
+
+
+struct bkpt_set_msg_t {
+          INT32    code;  /* 5 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   bkpt_addr;
+          INT32    pass_count;
+          INT32    bkpt_type;
+};
+
+
+struct bkpt_rm_msg_t {
+          INT32    code;  /* 6 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   bkpt_addr;
+};
+
+
+struct bkpt_stat_msg_t {
+          INT32    code;  /* 7 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   bkpt_addr;
+};
+
+
+struct copy_msg_t {
+          INT32    code;  /* 8 */
+          INT32    length;
+          INT32    source_space;
+          ADDR32   source_addr;
+          INT32    dest_space;
+          ADDR32   dest_addr;
+          INT32    byte_count;
+};
+
+
+struct fill_msg_t {
+          INT32    code;  /* 9 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   start_addr;
+          INT32    fill_count;
+          INT32    byte_count;
+          BYTE     fill_data[DUMMY];
+};
+
+
+struct init_msg_t {
+          INT32    code;  /* 10 */
+          INT32    length;
+          ADDR32   text_start;
+          ADDR32   text_end;
+          ADDR32   data_start;
+          ADDR32   data_end;
+          ADDR32   entry_point;
+          INT32    mem_stack_size;
+          INT32    reg_stack_size;
+          ADDR32   arg_start;
+          INT32    os_control;
+};
+
+
+struct go_msg_t {
+          INT32    code;  /* 11 */
+          INT32    length;
+};
+
+
+struct step_msg_t {
+          INT32    code;  /* 12 */
+          INT32    length;
+          INT32    count;
+};
+
+
+struct break_msg_t {
+          INT32    code;  /* 13 */
+          INT32    length;
+};
+
+
+struct hif_call_rtn_msg_t {
+          INT32    code;  /* 64 */
+          INT32    length;
+          INT32    service_number;
+          INT32    gr121;
+          INT32    gr96;
+          INT32    gr97;
+};
+
+
+struct channel0_msg_t {
+          INT32    code;  /* 65 */
+          INT32    length;
+          BYTE     data;
+};
+
+
+struct channel1_ack_msg_t {
+          INT32    code;  /* 66 */
+          INT32    length;
+};
+
+
+/*
+** Target to host messages
+*/
+
+
+struct reset_ack_msg_t {
+          INT32    code;  /* 32 */
+          INT32    length;
+};
+
+
+struct config_msg_t {
+          INT32    code;  /* 33 */
+          INT32    length;
+          INT32    processor_id;
+          INT32    version;
+          ADDR32   I_mem_start;
+          INT32    I_mem_size;
+          ADDR32   D_mem_start;
+          INT32    D_mem_size;
+          ADDR32   ROM_start;
+          INT32    ROM_size;
+          INT32    max_msg_size;
+          INT32    max_bkpts;
+          INT32    coprocessor;
+          INT32    reserved;
+};
+
+
+struct status_msg_t {
+          INT32    code;  /* 34 */
+          INT32    length;
+          INT32    msgs_sent;
+          INT32    msgs_received;
+          INT32    errors;
+          INT32    bkpts_hit;
+          INT32    bkpts_free;
+          INT32    traps;
+          INT32    fills;
+          INT32    spills;
+          INT32    cycles;
+          INT32    reserved;
+};
+
+
+struct read_ack_msg_t {
+          INT32    code;  /* 35 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+          BYTE     data[DUMMY];
+};
+
+struct read_r_ack_msg_t {
+          INT32    code;  /* 35 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+          INT32    data[DUMMY];
+};
+
+
+struct write_ack_msg_t {
+          INT32    code;  /* 36 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    byte_count;
+};
+
+
+struct bkpt_set_ack_msg_t {
+          INT32    code;  /* 37 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    pass_count;
+          INT32    bkpt_type;
+};
+
+
+struct bkpt_rm_ack_msg_t {
+          INT32    code;  /* 38 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   address;
+};
+
+
+struct bkpt_stat_ack_msg_t {
+          INT32    code;  /* 39 */
+          INT32    length; 
+          INT32    memory_space;
+          ADDR32   address;
+          INT32    pass_count;
+          INT32    bkpt_type;
+};
+
+
+struct copy_ack_msg_t {
+          INT32    code;  /* 40 */
+          INT32    length;
+          INT32    source_space;
+          ADDR32   source_addr;
+          INT32    dest_space;
+          ADDR32   dest_addr;
+          INT32    byte_count;
+};
+
+
+struct fill_ack_msg_t {
+          INT32    code;  /* 41 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   start_addr;
+          INT32    fill_count;
+          INT32    byte_count;
+};
+
+
+struct init_ack_msg_t {
+          INT32    code;  /* 42 */
+          INT32    length;
+};
+
+
+struct halt_msg_t {
+          INT32    code;  /* 43 */
+          INT32    length;
+          INT32    memory_space;
+          ADDR32   pc0;
+          ADDR32   pc1;
+          INT32    trap_number;
+};
+
+
+struct error_msg_t {
+          INT32    code;  /* 63 */
+          INT32    length;
+          INT32    error_code;
+          INT32    memory_space;
+          ADDR32   address;
+};
+
+
+struct hif_call_msg_t {
+          INT32    code;  /* 96 */
+          INT32    length;
+          INT32    service_number;
+          INT32    lr2;
+          INT32    lr3;
+          INT32    lr4;
+};
+
+
+struct channel0_ack_msg_t {
+          INT32    code;  /* 97 */
+          INT32    length;
+};
+
+
+struct channel1_msg_t {
+          INT32    code;  /* 98 */
+          INT32    length;
+          BYTE     data[DUMMY];
+};
+
+
+
+/*
+** Union all of the message types together
+*/
+
+union msg_t {
+         struct generic_msg_t        generic_msg;
+         struct generic_int32_msg_t  generic_int32_msg;
+
+         struct reset_msg_t          reset_msg;
+         struct config_req_msg_t     config_req_msg;
+         struct status_req_msg_t     status_req_msg;
+         struct read_req_msg_t       read_req_msg;
+         struct write_req_msg_t      write_req_msg;
+         struct write_r_msg_t        write_r_msg;
+         struct bkpt_set_msg_t       bkpt_set_msg;
+         struct bkpt_rm_msg_t        bkpt_rm_msg;
+         struct bkpt_stat_msg_t      bkpt_stat_msg;
+         struct copy_msg_t           copy_msg;
+         struct fill_msg_t           fill_msg;
+         struct init_msg_t           init_msg;
+         struct go_msg_t             go_msg;
+         struct step_msg_t           step_msg;
+         struct break_msg_t          break_msg;
+
+         struct hif_call_rtn_msg_t   hif_call_rtn_msg;
+         struct channel0_msg_t       channel0_msg;
+         struct channel1_ack_msg_t   channel1_ack_msg;
+
+         struct reset_ack_msg_t      reset_ack_msg;
+         struct config_msg_t         config_msg;
+         struct status_msg_t         status_msg;
+         struct read_ack_msg_t       read_ack_msg;
+         struct read_r_ack_msg_t     read_r_ack_msg;
+         struct write_ack_msg_t      write_ack_msg;
+         struct bkpt_set_ack_msg_t   bkpt_set_ack_msg;
+         struct bkpt_rm_ack_msg_t    bkpt_rm_ack_msg;
+         struct bkpt_stat_ack_msg_t  bkpt_stat_ack_msg;
+         struct copy_ack_msg_t       copy_ack_msg;
+         struct fill_ack_msg_t       fill_ack_msg;
+         struct init_ack_msg_t       init_ack_msg;
+         struct halt_msg_t           halt_msg;
+
+         struct error_msg_t          error_msg;
+
+         struct hif_call_msg_t       hif_call_msg;
+         struct channel0_ack_msg_t   channel0_ack_msg;
+         struct channel1_msg_t       channel1_msg;
+};
diff --git a/gdb/minsyms.c b/gdb/minsyms.c
new file mode 100644
index 0000000..a271c91
--- /dev/null
+++ b/gdb/minsyms.c
@@ -0,0 +1,904 @@
+/* GDB routines for manipulating the minimal symbol tables.
+   Copyright 1992, 93, 94, 96, 97, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Support, using pieces from other GDB modules.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/* This file contains support routines for creating, manipulating, and
+   destroying minimal symbol tables.
+
+   Minimal symbol tables are used to hold some very basic information about
+   all defined global symbols (text, data, bss, abs, etc).  The only two
+   required pieces of information are the symbol's name and the address
+   associated with that symbol.
+
+   In many cases, even if a file was compiled with no special options for
+   debugging at all, as long as was not stripped it will contain sufficient
+   information to build useful minimal symbol tables using this structure.
+   
+   Even when a file contains enough debugging information to build a full
+   symbol table, these minimal symbols are still useful for quickly mapping
+   between names and addresses, and vice versa.  They are also sometimes used
+   to figure out what full symbol table entries need to be read in. */
+
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "demangle.h"
+#include "gdb-stabs.h"
+
+/* Accumulate the minimal symbols for each objfile in bunches of BUNCH_SIZE.
+   At the end, copy them all into one newly allocated location on an objfile's
+   symbol obstack.  */
+
+#define BUNCH_SIZE 127
+
+struct msym_bunch
+{
+  struct msym_bunch *next;
+  struct minimal_symbol contents[BUNCH_SIZE];
+};
+
+/* Bunch currently being filled up.
+   The next field points to chain of filled bunches.  */
+
+static struct msym_bunch *msym_bunch;
+
+/* Number of slots filled in current bunch.  */
+
+static int msym_bunch_index;
+
+/* Total number of minimal symbols recorded so far for the objfile.  */
+
+static int msym_count;
+
+/* Prototypes for local functions. */
+
+static int
+compare_minimal_symbols PARAMS ((const void *, const void *));
+
+static int
+compact_minimal_symbols PARAMS ((struct minimal_symbol *, int));
+
+/* Look through all the current minimal symbol tables and find the
+   first minimal symbol that matches NAME.  If OBJF is non-NULL, limit
+   the search to that objfile.  If SFILE is non-NULL, limit the search
+   to that source file.  Returns a pointer to the minimal symbol that
+   matches, or NULL if no match is found.
+
+   Note:  One instance where there may be duplicate minimal symbols with
+   the same name is when the symbol tables for a shared library and the
+   symbol tables for an executable contain global symbols with the same
+   names (the dynamic linker deals with the duplication). */
+
+struct minimal_symbol *
+lookup_minimal_symbol (name, sfile, objf)
+     register const char *name;
+     const char *sfile;
+     struct objfile *objf;
+{
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *found_symbol = NULL;
+  struct minimal_symbol *found_file_symbol = NULL;
+  struct minimal_symbol *trampoline_symbol = NULL;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  if (sfile != NULL)
+    {
+      char *p = strrchr (sfile, '/');
+      if (p != NULL)
+	sfile = p + 1;
+    }
+#endif
+
+  for (objfile = object_files;
+       objfile != NULL && found_symbol == NULL;
+       objfile = objfile -> next)
+    {
+      if (objf == NULL || objf == objfile)
+	{
+	  for (msymbol = objfile -> msymbols;
+	       msymbol != NULL && SYMBOL_NAME (msymbol) != NULL &&
+	       found_symbol == NULL;
+	       msymbol++)
+	    {
+	      if (SYMBOL_MATCHES_NAME (msymbol, name))
+		{
+		  switch (MSYMBOL_TYPE (msymbol))
+		    {
+		    case mst_file_text:
+		    case mst_file_data:
+		    case mst_file_bss:
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+		      if (sfile == NULL || STREQ (msymbol->filename, sfile))
+			found_file_symbol = msymbol;
+#else
+		      /* We have neither the ability nor the need to
+			 deal with the SFILE parameter.  If we find
+			 more than one symbol, just return the latest
+			 one (the user can't expect useful behavior in
+			 that case).  */
+		      found_file_symbol = msymbol;
+#endif
+		      break;
+
+                    case mst_solib_trampoline:
+
+		      /* If a trampoline symbol is found, we prefer to
+			 keep looking for the *real* symbol. If the
+			 actual symbol is not found, then we'll use the
+			 trampoline entry. */
+		      if (trampoline_symbol == NULL)
+			trampoline_symbol = msymbol;
+		      break;
+
+		    case mst_unknown:
+		    default:
+		      found_symbol = msymbol;
+		      break;
+		    }
+		}
+	    }
+	}
+    }
+  /* External symbols are best.  */
+  if (found_symbol)
+    return found_symbol;
+
+  /* File-local symbols are next best.  */
+  if (found_file_symbol)
+    return found_file_symbol;
+
+  /* Symbols for shared library trampolines are next best.  */
+  if (trampoline_symbol)
+    return trampoline_symbol;
+
+  return NULL;
+}
+
+/* Look through all the current minimal symbol tables and find the
+   first minimal symbol that matches NAME and of text type.  
+   If OBJF is non-NULL, limit
+   the search to that objfile.  If SFILE is non-NULL, limit the search
+   to that source file.  Returns a pointer to the minimal symbol that
+   matches, or NULL if no match is found.
+*/
+   
+struct minimal_symbol *
+lookup_minimal_symbol_text (name, sfile, objf)
+     register const char *name;
+     const char *sfile;
+     struct objfile *objf;
+{
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *found_symbol = NULL;
+  struct minimal_symbol *found_file_symbol = NULL;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  if (sfile != NULL)
+    {
+      char *p = strrchr (sfile, '/');
+      if (p != NULL)
+	sfile = p + 1;
+    }
+#endif
+
+  for (objfile = object_files;
+       objfile != NULL && found_symbol == NULL;
+       objfile = objfile -> next)
+    {
+      if (objf == NULL || objf == objfile)
+	{
+	  for (msymbol = objfile -> msymbols;
+	       msymbol != NULL && SYMBOL_NAME (msymbol) != NULL &&
+	       found_symbol == NULL;
+	       msymbol++)
+	    {
+	      if (SYMBOL_MATCHES_NAME (msymbol, name) && 
+		  (MSYMBOL_TYPE (msymbol) == mst_text ||
+		   MSYMBOL_TYPE (msymbol) == mst_file_text))
+		{
+		  switch (MSYMBOL_TYPE (msymbol))
+		    {
+		    case mst_file_text:
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+		      if (sfile == NULL || STREQ (msymbol->filename, sfile))
+			found_file_symbol = msymbol;
+#else
+		      /* We have neither the ability nor the need to
+			 deal with the SFILE parameter.  If we find
+			 more than one symbol, just return the latest
+			 one (the user can't expect useful behavior in
+			 that case).  */
+		      found_file_symbol = msymbol;
+#endif
+		      break;
+		    default:
+		      found_symbol = msymbol;
+		      break;
+		    }
+		}
+	    }
+	}
+    }
+  /* External symbols are best.  */
+  if (found_symbol)
+    return found_symbol;
+
+  /* File-local symbols are next best.  */
+  if (found_file_symbol)
+    return found_file_symbol;
+
+  return NULL;
+}
+
+/* Look through all the current minimal symbol tables and find the
+   first minimal symbol that matches NAME and of solib trampoline type.  
+   If OBJF is non-NULL, limit
+   the search to that objfile.  If SFILE is non-NULL, limit the search
+   to that source file.  Returns a pointer to the minimal symbol that
+   matches, or NULL if no match is found.
+*/
+   
+struct minimal_symbol *
+lookup_minimal_symbol_solib_trampoline (name, sfile, objf)
+     register const char *name;
+     const char *sfile;
+     struct objfile *objf;
+{
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *found_symbol = NULL;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  if (sfile != NULL)
+    {
+      char *p = strrchr (sfile, '/');
+      if (p != NULL)
+	sfile = p + 1;
+    }
+#endif
+
+  for (objfile = object_files;
+       objfile != NULL && found_symbol == NULL;
+       objfile = objfile -> next)
+    {
+      if (objf == NULL || objf == objfile)
+	{
+	  for (msymbol = objfile -> msymbols;
+	       msymbol != NULL && SYMBOL_NAME (msymbol) != NULL &&
+	       found_symbol == NULL;
+	       msymbol++)
+	    {
+	      if (SYMBOL_MATCHES_NAME (msymbol, name) && 
+		  MSYMBOL_TYPE (msymbol) == mst_solib_trampoline)
+		return msymbol;
+	    }
+	}
+    }
+
+  return NULL;
+}
+
+
+/* Search through the minimal symbol table for each objfile and find
+   the symbol whose address is the largest address that is still less
+   than or equal to PC, and matches SECTION (if non-null).  Returns a
+   pointer to the minimal symbol if such a symbol is found, or NULL if
+   PC is not in a suitable range.  Note that we need to look through
+   ALL the minimal symbol tables before deciding on the symbol that
+   comes closest to the specified PC.  This is because objfiles can
+   overlap, for example objfile A has .text at 0x100 and .data at
+   0x40000 and objfile B has .text at 0x234 and .data at 0x40048.  */
+
+struct minimal_symbol *
+lookup_minimal_symbol_by_pc_section (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  int lo;
+  int hi;
+  int new;
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *best_symbol = NULL;
+
+  /* pc has to be in a known section. This ensures that anything beyond
+     the end of the last segment doesn't appear to be part of the last
+     function in the last segment.  */
+  if (find_pc_section (pc) == NULL)
+    return NULL;
+
+  for (objfile = object_files;
+       objfile != NULL;
+       objfile = objfile -> next)
+    {
+      /* If this objfile has a minimal symbol table, go search it using
+	 a binary search.  Note that a minimal symbol table always consists
+	 of at least two symbols, a "real" symbol and the terminating
+	 "null symbol".  If there are no real symbols, then there is no
+	 minimal symbol table at all. */
+
+      if ((msymbol = objfile -> msymbols) != NULL)
+	{
+	  lo = 0;
+	  hi = objfile -> minimal_symbol_count - 1;
+
+	  /* This code assumes that the minimal symbols are sorted by
+	     ascending address values.  If the pc value is greater than or
+	     equal to the first symbol's address, then some symbol in this
+	     minimal symbol table is a suitable candidate for being the
+	     "best" symbol.  This includes the last real symbol, for cases
+	     where the pc value is larger than any address in this vector.
+
+	     By iterating until the address associated with the current
+	     hi index (the endpoint of the test interval) is less than
+	     or equal to the desired pc value, we accomplish two things:
+	     (1) the case where the pc value is larger than any minimal
+	     symbol address is trivially solved, (2) the address associated
+	     with the hi index is always the one we want when the interation
+	     terminates.  In essence, we are iterating the test interval
+	     down until the pc value is pushed out of it from the high end.
+
+	     Warning: this code is trickier than it would appear at first. */
+
+	  /* Should also require that pc is <= end of objfile.  FIXME! */
+	  if (pc >= SYMBOL_VALUE_ADDRESS (&msymbol[lo]))
+	    {
+	      while (SYMBOL_VALUE_ADDRESS (&msymbol[hi]) > pc)
+		{
+		  /* pc is still strictly less than highest address */
+		  /* Note "new" will always be >= lo */
+		  new = (lo + hi) / 2;
+		  if ((SYMBOL_VALUE_ADDRESS (&msymbol[new]) >= pc) ||
+		      (lo == new))
+		    {
+		      hi = new;
+		    }
+		  else
+		    {
+		      lo = new;
+		    }
+		}
+
+	      /* If we have multiple symbols at the same address, we want
+		 hi to point to the last one.  That way we can find the
+		 right symbol if it has an index greater than hi.  */
+	      while (hi < objfile -> minimal_symbol_count - 1
+		     && (SYMBOL_VALUE_ADDRESS (&msymbol[hi])
+			 == SYMBOL_VALUE_ADDRESS (&msymbol[hi+1])))
+		hi++;
+
+	      /* The minimal symbol indexed by hi now is the best one in this
+		 objfile's minimal symbol table.  See if it is the best one
+		 overall. */
+
+	      /* Skip any absolute symbols.  This is apparently what adb
+		 and dbx do, and is needed for the CM-5.  There are two
+		 known possible problems: (1) on ELF, apparently end, edata,
+		 etc. are absolute.  Not sure ignoring them here is a big
+		 deal, but if we want to use them, the fix would go in
+		 elfread.c.  (2) I think shared library entry points on the
+		 NeXT are absolute.  If we want special handling for this
+		 it probably should be triggered by a special
+		 mst_abs_or_lib or some such.  */
+	      while (hi >= 0
+		     && msymbol[hi].type == mst_abs)
+		--hi;
+
+	      /* If "section" specified, skip any symbol from wrong section */
+	      /* This is the new code that distinguishes it from the old function */
+	      if (section)
+		while (hi >= 0
+		       && SYMBOL_BFD_SECTION (&msymbol[hi]) != section)
+		  --hi;
+
+	      if (hi >= 0
+		  && ((best_symbol == NULL) ||
+		      (SYMBOL_VALUE_ADDRESS (best_symbol) < 
+		       SYMBOL_VALUE_ADDRESS (&msymbol[hi]))))
+		{
+		  best_symbol = &msymbol[hi];
+		}
+	    }
+	}
+    }
+  return (best_symbol);
+}
+
+/* Backward compatibility: search through the minimal symbol table 
+   for a matching PC (no section given) */
+
+struct minimal_symbol *
+lookup_minimal_symbol_by_pc (pc)
+     CORE_ADDR pc;
+{
+  return lookup_minimal_symbol_by_pc_section (pc, find_pc_mapped_section (pc));
+}
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+CORE_ADDR
+find_stab_function_addr (namestring, pst, objfile)
+     char *namestring;
+     struct partial_symtab *pst;
+     struct objfile *objfile;
+{
+  struct minimal_symbol *msym;
+  char *p;
+  int n;
+
+  p = strchr (namestring, ':');
+  if (p == NULL)
+    p = namestring;
+  n = p - namestring;
+  p = alloca (n + 2);
+  strncpy (p, namestring, n);
+  p[n] = 0;
+
+  msym = lookup_minimal_symbol (p, pst->filename, objfile);
+  if (msym == NULL)
+    {
+      /* Sun Fortran appends an underscore to the minimal symbol name,
+	 try again with an appended underscore if the minimal symbol
+	 was not found.  */
+      p[n] = '_';
+      p[n + 1] = 0;
+      msym = lookup_minimal_symbol (p, pst->filename, objfile);
+    }
+  return msym == NULL ? 0 : SYMBOL_VALUE_ADDRESS (msym);
+}
+#endif /* SOFUN_ADDRESS_MAYBE_MISSING */
+
+
+/* Return leading symbol character for a BFD. If BFD is NULL,
+   return the leading symbol character from the main objfile.  */
+
+static int get_symbol_leading_char PARAMS ((bfd *));
+
+static int
+get_symbol_leading_char (abfd)
+     bfd * abfd;
+{
+  if (abfd != NULL)
+    return bfd_get_symbol_leading_char (abfd);
+  if (symfile_objfile != NULL && symfile_objfile->obfd != NULL)
+    return bfd_get_symbol_leading_char (symfile_objfile->obfd);
+  return 0;
+}
+
+/* Prepare to start collecting minimal symbols.  Note that presetting
+   msym_bunch_index to BUNCH_SIZE causes the first call to save a minimal
+   symbol to allocate the memory for the first bunch. */
+
+void
+init_minimal_symbol_collection ()
+{
+  msym_count = 0;
+  msym_bunch = NULL;
+  msym_bunch_index = BUNCH_SIZE;
+}
+
+void
+prim_record_minimal_symbol (name, address, ms_type, objfile)
+     const char *name;
+     CORE_ADDR address;
+     enum minimal_symbol_type ms_type;
+     struct objfile *objfile;
+{
+  int section;
+
+  switch (ms_type)
+    {
+    case mst_text:
+    case mst_file_text:
+    case mst_solib_trampoline:
+      section = SECT_OFF_TEXT;
+      break;
+    case mst_data:
+    case mst_file_data:
+      section = SECT_OFF_DATA;
+      break;
+    case mst_bss:
+    case mst_file_bss:
+      section = SECT_OFF_BSS;
+      break;
+    default:
+      section = -1;
+    }
+
+  prim_record_minimal_symbol_and_info (name, address, ms_type,
+				       NULL, section, NULL, objfile);
+}
+
+/* Record a minimal symbol in the msym bunches.  Returns the symbol
+   newly created.  */
+
+struct minimal_symbol *
+prim_record_minimal_symbol_and_info (name, address, ms_type, info, section,
+				     bfd_section, objfile)
+     const char *name;
+     CORE_ADDR address;
+     enum minimal_symbol_type ms_type;
+     char *info;
+     int section;
+     asection *bfd_section;
+     struct objfile *objfile;
+{
+  register struct msym_bunch *new;
+  register struct minimal_symbol *msymbol;
+
+  if (ms_type == mst_file_text)
+    {
+      /* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into
+	 the minimal symbols, because if there is also another symbol
+	 at the same address (e.g. the first function of the file),
+	 lookup_minimal_symbol_by_pc would have no way of getting the
+	 right one.  */
+      if (name[0] == 'g'
+	  && (strcmp (name, GCC_COMPILED_FLAG_SYMBOL) == 0
+	      || strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0))
+	return (NULL);
+
+      {
+	const char *tempstring = name;
+	if (tempstring[0] == get_symbol_leading_char (objfile->obfd))
+	  ++tempstring;
+	if (STREQN (tempstring, "__gnu_compiled", 14))
+	  return (NULL);
+      }
+    }
+
+  if (msym_bunch_index == BUNCH_SIZE)
+    {
+      new = (struct msym_bunch *) xmalloc (sizeof (struct msym_bunch));
+      msym_bunch_index = 0;
+      new -> next = msym_bunch;
+      msym_bunch = new;
+    }
+  msymbol = &msym_bunch -> contents[msym_bunch_index];
+  SYMBOL_NAME (msymbol) = obsavestring ((char *) name, strlen (name),
+					&objfile->symbol_obstack);
+  SYMBOL_INIT_LANGUAGE_SPECIFIC (msymbol, language_unknown);
+  SYMBOL_VALUE_ADDRESS (msymbol) = address;
+  SYMBOL_SECTION (msymbol) = section;
+  SYMBOL_BFD_SECTION (msymbol) = bfd_section;
+
+  MSYMBOL_TYPE (msymbol) = ms_type;
+  /* FIXME:  This info, if it remains, needs its own field.  */
+  MSYMBOL_INFO (msymbol) = info; /* FIXME! */
+  msym_bunch_index++;
+  msym_count++;
+  OBJSTAT (objfile, n_minsyms++);
+  return msymbol;
+}
+
+/* Compare two minimal symbols by address and return a signed result based
+   on unsigned comparisons, so that we sort into unsigned numeric order.  
+   Within groups with the same address, sort by name.  */
+
+static int
+compare_minimal_symbols (fn1p, fn2p)
+     const PTR fn1p;
+     const PTR fn2p;
+{
+  register const struct minimal_symbol *fn1;
+  register const struct minimal_symbol *fn2;
+
+  fn1 = (const struct minimal_symbol *) fn1p;
+  fn2 = (const struct minimal_symbol *) fn2p;
+
+  if (SYMBOL_VALUE_ADDRESS (fn1) < SYMBOL_VALUE_ADDRESS (fn2))
+    {
+      return (-1);	/* addr 1 is less than addr 2 */
+    }
+  else if (SYMBOL_VALUE_ADDRESS (fn1) > SYMBOL_VALUE_ADDRESS (fn2))
+    {
+      return (1);	/* addr 1 is greater than addr 2 */
+    }
+  else			/* addrs are equal: sort by name */
+    {
+      char *name1 = SYMBOL_NAME (fn1);
+      char *name2 = SYMBOL_NAME (fn2);
+
+      if (name1 && name2)	/* both have names */
+	return strcmp (name1, name2);
+      else if (name2)
+	return 1;	/* fn1 has no name, so it is "less" */
+      else if (name1)	/* fn2 has no name, so it is "less" */
+	return -1;
+      else
+	return (0);	/* neither has a name, so they're equal. */
+    }
+}
+
+/* Discard the currently collected minimal symbols, if any.  If we wish
+   to save them for later use, we must have already copied them somewhere
+   else before calling this function.
+
+   FIXME:  We could allocate the minimal symbol bunches on their own
+   obstack and then simply blow the obstack away when we are done with
+   it.  Is it worth the extra trouble though? */
+
+/* ARGSUSED */
+void
+discard_minimal_symbols (foo)
+     int foo;
+{
+  register struct msym_bunch *next;
+
+  while (msym_bunch != NULL)
+    {
+      next = msym_bunch -> next;
+      free ((PTR)msym_bunch);
+      msym_bunch = next;
+    }
+}
+
+/* Compact duplicate entries out of a minimal symbol table by walking
+   through the table and compacting out entries with duplicate addresses
+   and matching names.  Return the number of entries remaining.
+
+   On entry, the table resides between msymbol[0] and msymbol[mcount].
+   On exit, it resides between msymbol[0] and msymbol[result_count].
+
+   When files contain multiple sources of symbol information, it is
+   possible for the minimal symbol table to contain many duplicate entries.
+   As an example, SVR4 systems use ELF formatted object files, which
+   usually contain at least two different types of symbol tables (a
+   standard ELF one and a smaller dynamic linking table), as well as
+   DWARF debugging information for files compiled with -g.
+
+   Without compacting, the minimal symbol table for gdb itself contains
+   over a 1000 duplicates, about a third of the total table size.  Aside
+   from the potential trap of not noticing that two successive entries
+   identify the same location, this duplication impacts the time required
+   to linearly scan the table, which is done in a number of places.  So we
+   just do one linear scan here and toss out the duplicates.
+
+   Note that we are not concerned here about recovering the space that
+   is potentially freed up, because the strings themselves are allocated
+   on the symbol_obstack, and will get automatically freed when the symbol
+   table is freed.  The caller can free up the unused minimal symbols at
+   the end of the compacted region if their allocation strategy allows it.
+
+   Also note we only go up to the next to last entry within the loop
+   and then copy the last entry explicitly after the loop terminates.
+
+   Since the different sources of information for each symbol may
+   have different levels of "completeness", we may have duplicates
+   that have one entry with type "mst_unknown" and the other with a
+   known type.  So if the one we are leaving alone has type mst_unknown,
+   overwrite its type with the type from the one we are compacting out.  */
+
+static int
+compact_minimal_symbols (msymbol, mcount)
+     struct minimal_symbol *msymbol;
+     int mcount;
+{
+  struct minimal_symbol *copyfrom;
+  struct minimal_symbol *copyto;
+
+  if (mcount > 0)
+    {
+      copyfrom = copyto = msymbol;
+      while (copyfrom < msymbol + mcount - 1)
+	{
+	  if (SYMBOL_VALUE_ADDRESS (copyfrom) == 
+	      SYMBOL_VALUE_ADDRESS ((copyfrom + 1)) &&
+	      (STREQ (SYMBOL_NAME (copyfrom), SYMBOL_NAME ((copyfrom + 1)))))
+	    {
+	      if (MSYMBOL_TYPE((copyfrom + 1)) == mst_unknown)
+		{
+		  MSYMBOL_TYPE ((copyfrom + 1)) = MSYMBOL_TYPE (copyfrom);
+		}
+	      copyfrom++;
+	    }
+	  else
+	    {
+	      *copyto++ = *copyfrom++;
+	    }
+	}
+      *copyto++ = *copyfrom++;
+      mcount = copyto - msymbol;
+    }
+  return (mcount);
+}
+
+/* Add the minimal symbols in the existing bunches to the objfile's official
+   minimal symbol table.  In most cases there is no minimal symbol table yet
+   for this objfile, and the existing bunches are used to create one.  Once
+   in a while (for shared libraries for example), we add symbols (e.g. common
+   symbols) to an existing objfile.
+
+   Because of the way minimal symbols are collected, we generally have no way
+   of knowing what source language applies to any particular minimal symbol.
+   Specifically, we have no way of knowing if the minimal symbol comes from a
+   C++ compilation unit or not.  So for the sake of supporting cached
+   demangled C++ names, we have no choice but to try and demangle each new one
+   that comes in.  If the demangling succeeds, then we assume it is a C++
+   symbol and set the symbol's language and demangled name fields
+   appropriately.  Note that in order to avoid unnecessary demanglings, and
+   allocating obstack space that subsequently can't be freed for the demangled
+   names, we mark all newly added symbols with language_auto.  After
+   compaction of the minimal symbols, we go back and scan the entire minimal
+   symbol table looking for these new symbols.  For each new symbol we attempt
+   to demangle it, and if successful, record it as a language_cplus symbol
+   and cache the demangled form on the symbol obstack.  Symbols which don't
+   demangle are marked as language_unknown symbols, which inhibits future
+   attempts to demangle them if we later add more minimal symbols. */
+
+void
+install_minimal_symbols (objfile)
+     struct objfile *objfile;
+{
+  register int bindex;
+  register int mcount;
+  register struct msym_bunch *bunch;
+  register struct minimal_symbol *msymbols;
+  int alloc_count;
+  register char leading_char;
+
+  if (msym_count > 0)
+    {
+      /* Allocate enough space in the obstack, into which we will gather the
+	 bunches of new and existing minimal symbols, sort them, and then
+	 compact out the duplicate entries.  Once we have a final table,
+	 we will give back the excess space.  */
+
+      alloc_count = msym_count + objfile->minimal_symbol_count + 1;
+      obstack_blank (&objfile->symbol_obstack,
+		     alloc_count * sizeof (struct minimal_symbol));
+      msymbols = (struct minimal_symbol *)
+		 obstack_base (&objfile->symbol_obstack);
+
+      /* Copy in the existing minimal symbols, if there are any.  */
+
+      if (objfile->minimal_symbol_count)
+        memcpy ((char *)msymbols, (char *)objfile->msymbols, 
+		objfile->minimal_symbol_count * sizeof (struct minimal_symbol));
+
+      /* Walk through the list of minimal symbol bunches, adding each symbol
+	 to the new contiguous array of symbols.  Note that we start with the
+	 current, possibly partially filled bunch (thus we use the current
+	 msym_bunch_index for the first bunch we copy over), and thereafter
+	 each bunch is full. */
+      
+      mcount = objfile->minimal_symbol_count;
+      leading_char = get_symbol_leading_char (objfile->obfd);
+      
+      for (bunch = msym_bunch; bunch != NULL; bunch = bunch -> next)
+	{
+	  for (bindex = 0; bindex < msym_bunch_index; bindex++, mcount++)
+	    {
+	      msymbols[mcount] = bunch -> contents[bindex];
+	      SYMBOL_LANGUAGE (&msymbols[mcount]) = language_auto;
+	      if (SYMBOL_NAME (&msymbols[mcount])[0] == leading_char)
+		{
+		  SYMBOL_NAME(&msymbols[mcount])++;
+		}
+	    }
+	  msym_bunch_index = BUNCH_SIZE;
+	}
+
+      /* Sort the minimal symbols by address.  */
+      
+      qsort (msymbols, mcount, sizeof (struct minimal_symbol),
+	     compare_minimal_symbols);
+      
+      /* Compact out any duplicates, and free up whatever space we are
+	 no longer using.  */
+      
+      mcount = compact_minimal_symbols (msymbols, mcount);
+
+      obstack_blank (&objfile->symbol_obstack,
+	(mcount + 1 - alloc_count) * sizeof (struct minimal_symbol));
+      msymbols = (struct minimal_symbol *)
+	obstack_finish (&objfile->symbol_obstack);
+
+      /* We also terminate the minimal symbol table with a "null symbol",
+	 which is *not* included in the size of the table.  This makes it
+	 easier to find the end of the table when we are handed a pointer
+	 to some symbol in the middle of it.  Zero out the fields in the
+	 "null symbol" allocated at the end of the array.  Note that the
+	 symbol count does *not* include this null symbol, which is why it
+	 is indexed by mcount and not mcount-1. */
+
+      SYMBOL_NAME (&msymbols[mcount]) = NULL;
+      SYMBOL_VALUE_ADDRESS (&msymbols[mcount]) = 0;
+      MSYMBOL_INFO (&msymbols[mcount]) = NULL;
+      MSYMBOL_TYPE (&msymbols[mcount]) = mst_unknown;
+      SYMBOL_INIT_LANGUAGE_SPECIFIC (&msymbols[mcount], language_unknown);
+
+      /* Attach the minimal symbol table to the specified objfile.
+	 The strings themselves are also located in the symbol_obstack
+	 of this objfile.  */
+
+      objfile -> minimal_symbol_count = mcount;
+      objfile -> msymbols = msymbols;
+
+      /* Now walk through all the minimal symbols, selecting the newly added
+	 ones and attempting to cache their C++ demangled names. */
+
+      for ( ; mcount-- > 0 ; msymbols++)
+	{
+	  SYMBOL_INIT_DEMANGLED_NAME (msymbols, &objfile->symbol_obstack);
+	}
+    }
+}
+
+/* Sort all the minimal symbols in OBJFILE.  */
+
+void
+msymbols_sort (objfile)
+     struct objfile *objfile;
+{
+  qsort (objfile->msymbols, objfile->minimal_symbol_count,
+	 sizeof (struct minimal_symbol), compare_minimal_symbols);
+}
+
+/* Check if PC is in a shared library trampoline code stub.
+   Return minimal symbol for the trampoline entry or NULL if PC is not
+   in a trampoline code stub.  */
+
+struct minimal_symbol *
+lookup_solib_trampoline_symbol_by_pc (pc)
+     CORE_ADDR pc;
+{
+  struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc);
+
+  if (msymbol != NULL && MSYMBOL_TYPE (msymbol) == mst_solib_trampoline)
+    return msymbol;
+  return NULL;
+}
+
+/* If PC is in a shared library trampoline code stub, return the
+   address of the `real' function belonging to the stub.
+   Return 0 if PC is not in a trampoline code stub or if the real
+   function is not found in the minimal symbol table.
+
+   We may fail to find the right function if a function with the
+   same name is defined in more than one shared library, but this
+   is considered bad programming style. We could return 0 if we find
+   a duplicate function in case this matters someday.  */
+
+CORE_ADDR
+find_solib_trampoline_target (pc)
+     CORE_ADDR pc;
+{
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *tsymbol = lookup_solib_trampoline_symbol_by_pc (pc);
+
+  if (tsymbol != NULL)
+    {
+      ALL_MSYMBOLS (objfile, msymbol)
+	{
+	  if (MSYMBOL_TYPE (msymbol) == mst_text
+	      && STREQ (SYMBOL_NAME (msymbol), SYMBOL_NAME (tsymbol)))
+	    return SYMBOL_VALUE_ADDRESS (msymbol);
+	}
+    }
+  return 0;
+}
+
diff --git a/gdb/mips-nat.c b/gdb/mips-nat.c
new file mode 100644
index 0000000..9f57174
--- /dev/null
+++ b/gdb/mips-nat.c
@@ -0,0 +1,244 @@
+/* Low level DECstation interface to ptrace, for GDB when running native.
+   Copyright 1988, 1989, 1991, 1992, 1995 Free Software Foundation, Inc.
+   Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
+   and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include <sys/ptrace.h>
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/user.h>
+#undef JB_S0
+#undef JB_S1
+#undef JB_S2
+#undef JB_S3
+#undef JB_S4
+#undef JB_S5
+#undef JB_S6
+#undef JB_S7
+#undef JB_SP
+#undef JB_S8
+#undef JB_PC
+#undef JB_SR
+#undef NJBREGS
+#include <setjmp.h>		/* For JB_XXX.  */
+
+/* Size of elements in jmpbuf */
+
+#define JB_ELEMENT_SIZE 4
+
+/* Map gdb internal register number to ptrace ``address''.
+   These ``addresses'' are defined in DECstation <sys/ptrace.h> */
+
+#define REGISTER_PTRACE_ADDR(regno) \
+   (regno < 32 ? 		GPR_BASE + regno \
+  : regno == PC_REGNUM ?	PC	\
+  : regno == CAUSE_REGNUM ?	CAUSE	\
+  : regno == HI_REGNUM ?	MMHI	\
+  : regno == LO_REGNUM ?	MMLO	\
+  : regno == FCRCS_REGNUM ?	FPC_CSR	\
+  : regno == FCRIR_REGNUM ?	FPC_EIR	\
+  : regno >= FP0_REGNUM ?	FPR_BASE + (regno - FP0_REGNUM) \
+  : 0)
+
+static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+/* Get all registers from the inferior */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[MAX_REGISTER_RAW_SIZE];
+  register int i;
+
+  registers_fetched ();
+
+  for (regno = 1; regno < NUM_REGS; regno++)
+    {
+      regaddr = REGISTER_PTRACE_ADDR (regno);
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
+ 	{
+ 	  *(int *) &buf[i] = ptrace (PT_READ_U, inferior_pid,
+				     (PTRACE_ARG3_TYPE) regaddr, 0);
+ 	  regaddr += sizeof (int);
+ 	}
+      supply_register (regno, buf);
+    }
+
+  supply_register (ZERO_REGNUM, zerobuf);
+  /* Frame ptr reg must appear to be 0; it is faked by stack handling code. */
+  supply_register (FP_REGNUM, zerobuf);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  if (regno > 0)
+    {
+      if (regno == ZERO_REGNUM || regno == PS_REGNUM
+	  || regno == BADVADDR_REGNUM || regno == CAUSE_REGNUM
+	  || regno == FCRIR_REGNUM || regno == FP_REGNUM
+	  || (regno >= FIRST_EMBED_REGNUM && regno <= LAST_EMBED_REGNUM))
+	return;
+      regaddr = REGISTER_PTRACE_ADDR (regno);
+      errno = 0;
+      ptrace (PT_WRITE_U, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+	      read_register (regno));
+      if (errno != 0)
+	{
+	  sprintf (buf, "writing register number %d", regno);
+	  perror_with_name (buf);
+	}
+    }
+  else
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	store_inferior_registers (regno);
+    }
+}
+
+
+/* Figure out where the longjmp will land.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target(pc)
+     CORE_ADDR *pc;
+{
+  CORE_ADDR jb_addr;
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+
+  jb_addr = read_register (A0_REGNUM);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
+
+/* Extract the register values out of the core file and store
+   them where `read_register' will find them.
+
+   CORE_REG_SECT points to the register values themselves, read into memory.
+   CORE_REG_SIZE is the size of that area.
+   WHICH says which set of registers we are handling (0 = int, 2 = float
+         on machines where they are discontiguous).
+   REG_ADDR is the offset from u.u_ar0 to the register values relative to
+            core_reg_sect.  This is used with old-fashioned core files to
+	    locate the registers in a large upage-plus-stack ".reg" section.
+	    Original upage address X is at location core_reg_sect+x+reg_addr.
+ */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;
+{
+  register int regno;
+  register unsigned int addr;
+  int bad_reg = -1;
+  register reg_ptr = -reg_addr;		/* Original u.u_ar0 is -reg_addr. */
+
+  /* If u.u_ar0 was an absolute address in the core file, relativize it now,
+     so we can use it as an offset into core_reg_sect.  When we're done,
+     "register 0" will be at core_reg_sect+reg_ptr, and we can use
+     register_addr to offset to the other registers.  If this is a modern
+     core file without a upage, reg_ptr will be zero and this is all a big
+     NOP.  */
+  if (reg_ptr > core_reg_size)
+#ifdef KERNEL_U_ADDR
+    reg_ptr -= KERNEL_U_ADDR;
+#else
+    error ("Old mips core file can't be processed on this machine.");
+#endif
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    {
+      addr = register_addr (regno, reg_ptr);
+      if (addr >= core_reg_size) {
+	if (bad_reg < 0)
+	  bad_reg = regno;
+      } else {
+	supply_register (regno, core_reg_sect + addr);
+      }
+    }
+  if (bad_reg >= 0)
+    {
+      error ("Register %s not found in core file.", REGISTER_NAME (bad_reg));
+    }
+  supply_register (ZERO_REGNUM, zerobuf);
+  /* Frame ptr reg must appear to be 0; it is faked by stack handling code. */
+  supply_register (FP_REGNUM, zerobuf);
+}
+
+/* Return the address in the core dump or inferior of register REGNO.
+   BLOCKEND is the address of the end of the user structure.  */
+
+CORE_ADDR
+register_addr (regno, blockend)
+     int regno;
+     CORE_ADDR blockend;
+{
+  CORE_ADDR addr;
+
+  if (regno < 0 || regno >= NUM_REGS)
+    error ("Invalid register number %d.", regno);
+
+  REGISTER_U_ADDR (addr, blockend, regno);
+
+  return addr;
+}
+
+
+/* Register that we are able to handle mips core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns mips_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_mips ()
+{
+  add_core_fns (&mips_core_fns);
+}
diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c
new file mode 100644
index 0000000..e4aa2bb
--- /dev/null
+++ b/gdb/mips-tdep.c
@@ -0,0 +1,3259 @@
+/* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger.
+   Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
+   Free Software Foundation, Inc.
+   Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU
+   and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+#include "gdbcmd.h"
+#include "language.h"
+#include "gdbcore.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbtypes.h"
+#include "target.h"
+
+#include "opcode/mips.h"
+
+/* Some MIPS boards don't support floating point, so we permit the
+   user to turn it off.  */
+
+enum mips_fpu_type
+{
+  MIPS_FPU_DOUBLE,	/* Full double precision floating point.  */
+  MIPS_FPU_SINGLE,	/* Single precision floating point (R4650).  */
+  MIPS_FPU_NONE		/* No floating point.  */
+};
+
+#ifndef MIPS_DEFAULT_FPU_TYPE
+#define MIPS_DEFAULT_FPU_TYPE MIPS_FPU_DOUBLE
+#endif
+static int mips_fpu_type_auto = 1;
+static enum mips_fpu_type mips_fpu_type = MIPS_DEFAULT_FPU_TYPE;
+#define MIPS_FPU_TYPE mips_fpu_type
+
+
+#define VM_MIN_ADDRESS (CORE_ADDR)0x400000
+
+/* Do not use "TARGET_IS_MIPS64" to test the size of floating point registers */
+#define FP_REGISTER_DOUBLE (REGISTER_VIRTUAL_SIZE(FP0_REGNUM) == 8)
+
+#if 0
+static int mips_in_lenient_prologue PARAMS ((CORE_ADDR, CORE_ADDR));
+#endif
+
+int gdb_print_insn_mips PARAMS ((bfd_vma, disassemble_info *));
+
+static void mips_print_register PARAMS ((int, int));
+
+static mips_extra_func_info_t
+heuristic_proc_desc PARAMS ((CORE_ADDR, CORE_ADDR, struct frame_info *));
+
+static CORE_ADDR heuristic_proc_start PARAMS ((CORE_ADDR));
+
+static CORE_ADDR read_next_frame_reg PARAMS ((struct frame_info *, int));
+
+void mips_set_processor_type_command PARAMS ((char *, int));
+
+int mips_set_processor_type PARAMS ((char *));
+
+static void mips_show_processor_type_command PARAMS ((char *, int));
+
+static void reinit_frame_cache_sfunc PARAMS ((char *, int,
+					      struct cmd_list_element *));
+
+static mips_extra_func_info_t
+  find_proc_desc PARAMS ((CORE_ADDR pc, struct frame_info *next_frame));
+
+static CORE_ADDR after_prologue PARAMS ((CORE_ADDR pc,
+					 mips_extra_func_info_t proc_desc));
+
+/* This value is the model of MIPS in use.  It is derived from the value
+   of the PrID register.  */
+
+char *mips_processor_type;
+
+char *tmp_mips_processor_type;
+
+/* A set of original names, to be used when restoring back to generic
+   registers from a specific set.  */
+
+char *mips_generic_reg_names[] = REGISTER_NAMES;
+
+/* Names of IDT R3041 registers.  */
+
+char *mips_r3041_reg_names[] = {
+	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3",
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7",
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7",
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra",
+	"sr",	"lo",	"hi",	"bad",	"cause","pc",
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7",
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15",
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",
+	"fsr",  "fir",  "fp",	"",
+	"",	"",	"bus",	"ccfg",	"",	"",	"",	"",
+	"",	"",	"port",	"cmp",	"",	"",	"epc",	"prid",
+};
+
+/* Names of IDT R3051 registers.  */
+
+char *mips_r3051_reg_names[] = {
+	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3",
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7",
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7",
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra",
+	"sr",	"lo",	"hi",	"bad",	"cause","pc",
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7",
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15",
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",
+	"fsr",  "fir",  "fp",	"",
+	"inx",	"rand",	"elo",	"",	"ctxt",	"",	"",	"",
+	"",	"",	"ehi",	"",	"",	"",	"epc",	"prid",
+};
+
+/* Names of IDT R3081 registers.  */
+
+char *mips_r3081_reg_names[] = {
+	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3",
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7",
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7",
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra",
+	"sr",	"lo",	"hi",	"bad",	"cause","pc",
+	"f0",   "f1",   "f2",   "f3",   "f4",   "f5",   "f6",   "f7",
+	"f8",   "f9",   "f10",  "f11",  "f12",  "f13",  "f14",  "f15",
+	"f16",  "f17",  "f18",  "f19",  "f20",  "f21",  "f22",  "f23",
+	"f24",  "f25",  "f26",  "f27",  "f28",  "f29",  "f30",  "f31",
+	"fsr",  "fir",  "fp",	"",
+	"inx",	"rand",	"elo",	"cfg",	"ctxt",	"",	"",	"",
+	"",	"",	"ehi",	"",	"",	"",	"epc",	"prid",
+};
+
+/* Names of LSI 33k registers.  */
+
+char *mips_lsi33k_reg_names[] = {
+	"zero",	"at",	"v0",	"v1",	"a0",	"a1",	"a2",	"a3",
+	"t0",	"t1",	"t2",	"t3",	"t4",	"t5",	"t6",	"t7",
+	"s0",	"s1",	"s2",	"s3",	"s4",	"s5",	"s6",	"s7",
+	"t8",	"t9",	"k0",	"k1",	"gp",	"sp",	"s8",	"ra",
+	"epc",	"hi",	"lo",	"sr",	"cause","badvaddr",
+	"dcic", "bpc",  "bda",  "",     "",     "",     "",      "",
+	"",     "",     "",     "",     "",     "",     "",      "",
+	"",     "",     "",     "",     "",     "",     "",      "",
+	"",     "",     "",     "",     "",     "",     "",      "",
+	"",     "",     "",	"",
+	"",	"",	"",	"",	"",	"",	"",	 "",
+	"",	"",	"",	"",	"",	"",	"",	 "",
+};
+
+struct {
+  char *name;
+  char **regnames;
+} mips_processor_type_table[] = {
+  { "generic", mips_generic_reg_names },
+  { "r3041", mips_r3041_reg_names },
+  { "r3051", mips_r3051_reg_names },
+  { "r3071", mips_r3081_reg_names },
+  { "r3081", mips_r3081_reg_names },
+  { "lsi33k", mips_lsi33k_reg_names },
+  { NULL, NULL }
+};
+
+/* Table to translate MIPS16 register field to actual register number.  */
+static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 };
+
+/* Heuristic_proc_start may hunt through the text section for a long
+   time across a 2400 baud serial line.  Allows the user to limit this
+   search.  */
+
+static unsigned int heuristic_fence_post = 0;
+
+#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */
+#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */
+#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset)
+#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg)
+#define PROC_FRAME_ADJUST(proc)  ((proc)->frame_adjust)
+#define PROC_REG_MASK(proc) ((proc)->pdr.regmask)
+#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask)
+#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset)
+#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset)
+#define PROC_PC_REG(proc) ((proc)->pdr.pcreg)
+#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym)
+#define _PROC_MAGIC_ 0x0F0F0F0F
+#define PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym == _PROC_MAGIC_)
+#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_)
+
+struct linked_proc_info
+{
+  struct mips_extra_func_info info;
+  struct linked_proc_info *next;
+} *linked_proc_desc_table = NULL;
+
+
+/* Should the upper word of 64-bit addresses be zeroed? */
+static int mask_address_p = 1;
+
+/* Should call_function allocate stack space for a struct return?  */
+int
+mips_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  if (MIPS_EABI)
+    return (TYPE_LENGTH (type) > 2 * MIPS_REGSIZE);
+  else
+    return 1; /* Structures are returned by ref in extra arg0 */
+}
+
+/* Tell if the program counter value in MEMADDR is in a MIPS16 function.  */
+
+static int
+pc_is_mips16 (bfd_vma memaddr)
+{
+  struct minimal_symbol *sym;
+
+  /* If bit 0 of the address is set, assume this is a MIPS16 address. */
+  if (IS_MIPS16_ADDR (memaddr))
+    return 1;
+
+  /* A flag indicating that this is a MIPS16 function is stored by elfread.c in
+     the high bit of the info field.  Use this to decide if the function is
+     MIPS16 or normal MIPS.  */
+  sym = lookup_minimal_symbol_by_pc (memaddr);
+  if (sym)
+    return MSYMBOL_IS_SPECIAL (sym);
+  else
+    return 0;
+}
+
+
+/* This returns the PC of the first inst after the prologue.  If we can't
+   find the prologue, then return 0.  */
+
+static CORE_ADDR
+after_prologue (pc, proc_desc)
+     CORE_ADDR pc;
+     mips_extra_func_info_t proc_desc;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR func_addr, func_end;
+
+  if (!proc_desc)
+    proc_desc = find_proc_desc (pc, NULL);
+
+  if (proc_desc)
+    {
+      /* If function is frameless, then we need to do it the hard way.  I
+	 strongly suspect that frameless always means prologueless... */
+      if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+	  && PROC_FRAME_OFFSET (proc_desc) == 0)
+	return 0;
+    }
+
+  if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    return 0;			/* Unknown */
+
+  sal = find_pc_line (func_addr, 0);
+
+  if (sal.end < func_end)
+    return sal.end;
+
+  /* The line after the prologue is after the end of the function.  In this
+     case, tell the caller to find the prologue the hard way.  */
+
+  return 0;
+}
+
+/* Decode a MIPS32 instruction that saves a register in the stack, and
+   set the appropriate bit in the general register mask or float register mask
+   to indicate which register is saved.  This is a helper function
+   for mips_find_saved_regs.  */
+
+static void
+mips32_decode_reg_save (inst, gen_mask, float_mask)
+     t_inst inst;
+     unsigned long *gen_mask;
+     unsigned long *float_mask;
+{
+  int reg;
+
+  if ((inst & 0xffe00000) == 0xafa00000		/* sw reg,n($sp) */
+      || (inst & 0xffe00000) == 0xafc00000	/* sw reg,n($r30) */
+      || (inst & 0xffe00000) == 0xffa00000)	/* sd reg,n($sp) */
+    {
+      /* It might be possible to use the instruction to
+	 find the offset, rather than the code below which
+	 is based on things being in a certain order in the
+	 frame, but figuring out what the instruction's offset
+	 is relative to might be a little tricky.  */
+      reg = (inst & 0x001f0000) >> 16;
+      *gen_mask |= (1 << reg);
+    }
+  else if ((inst & 0xffe00000) == 0xe7a00000	/* swc1 freg,n($sp) */
+	   || (inst & 0xffe00000) == 0xe7c00000	/* swc1 freg,n($r30) */
+	   || (inst & 0xffe00000) == 0xf7a00000)/* sdc1 freg,n($sp) */
+
+    {
+      reg = ((inst & 0x001f0000) >> 16);
+      *float_mask |= (1 << reg);
+    }
+}
+
+/* Decode a MIPS16 instruction that saves a register in the stack, and
+   set the appropriate bit in the general register or float register mask
+   to indicate which register is saved.  This is a helper function
+   for mips_find_saved_regs.  */
+
+static void
+mips16_decode_reg_save (inst, gen_mask)
+     t_inst inst;
+     unsigned long *gen_mask;
+{
+  if ((inst & 0xf800) == 0xd000)		/* sw reg,n($sp) */
+    {
+      int reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+      *gen_mask |= (1 << reg);
+    }
+  else if ((inst & 0xff00) == 0xf900)		/* sd reg,n($sp) */
+    {
+      int reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+      *gen_mask |= (1 << reg);
+    }
+  else if ((inst & 0xff00) == 0x6200		/* sw $ra,n($sp) */
+	   || (inst & 0xff00) == 0xfa00)	/* sd $ra,n($sp) */
+    *gen_mask |= (1 << RA_REGNUM);
+}
+
+
+/* Fetch and return instruction from the specified location.  If the PC
+   is odd, assume it's a MIPS16 instruction; otherwise MIPS32.  */
+
+static t_inst
+mips_fetch_instruction (addr)
+    CORE_ADDR addr;
+{
+  char buf[MIPS_INSTLEN];
+  int instlen;
+  int status;
+
+  if (pc_is_mips16 (addr))
+    {
+      instlen = MIPS16_INSTLEN;
+      addr = UNMAKE_MIPS16_ADDR (addr);
+    }
+  else
+      instlen = MIPS_INSTLEN;
+  status = read_memory_nobpt (addr, buf, instlen);
+  if (status)
+    memory_error (status, addr);
+  return extract_unsigned_integer (buf, instlen);
+}
+
+
+/* These the fields of 32 bit mips instructions */
+#define mips32_op(x) (x >> 25)
+#define itype_op(x) (x >> 25)
+#define itype_rs(x) ((x >> 21)& 0x1f)
+#define itype_rt(x) ((x >> 16) & 0x1f)
+#define itype_immediate(x) ( x & 0xffff)
+
+#define jtype_op(x) (x >> 25)
+#define jtype_target(x) ( x & 0x03fffff)
+
+#define rtype_op(x) (x >>25)
+#define rtype_rs(x) ((x>>21) & 0x1f)
+#define rtype_rt(x) ((x>>16)  & 0x1f)
+#define rtype_rd(x) ((x>>11) & 0x1f) 
+#define rtype_shamt(x) ((x>>6) & 0x1f)
+#define rtype_funct(x) (x & 0x3f )
+
+static CORE_ADDR
+mips32_relative_offset(unsigned long inst)
+{ long x ;
+  x = itype_immediate(inst) ;
+  if (x & 0x8000) /* sign bit set */
+    {
+      x |= 0xffff0000 ; /* sign extension */
+    }
+  x = x << 2 ;
+  return x ;
+}
+
+/* Determine whate to set a single step breakpoint while considering
+   branch prediction */
+CORE_ADDR
+mips32_next_pc(CORE_ADDR pc)
+{
+  unsigned long inst ;
+  int op ;
+  inst = mips_fetch_instruction(pc) ;
+  if ((inst & 0xe0000000) != 0) /* Not a special, junp or branch instruction */
+    { if ((inst >> 27) == 5) /* BEQL BNEZ BLEZL BGTZE , bits 0101xx */
+	{ op = ((inst >> 25) & 0x03) ;
+	  switch (op)
+	    {
+	    case 0 : goto equal_branch ; /* BEQL   */
+	    case 1 : goto neq_branch ;   /* BNEZ   */
+	    case 2 : goto less_branch ;  /* BLEZ   */
+	    case 3 : goto greater_branch ; /* BGTZ */
+	    default : pc += 4 ;
+	    }
+	}
+      else pc += 4 ; /* Not a branch, next instruction is easy */
+    }
+  else
+    { /* This gets way messy */
+      
+      /* Further subdivide into SPECIAL, REGIMM and other */
+      switch (op = ((inst >> 26) & 0x07))  /* extract bits 28,27,26 */
+	{
+	  case 0 : /* SPECIAL */
+	    op = rtype_funct(inst) ;
+	    switch (op)
+	      {
+	      case 8 : /* JR */
+	      case 9 : /* JALR */
+		pc = read_register(rtype_rs(inst)) ; /* Set PC to that address */
+		break ;
+	      default: pc += 4 ;
+	      }
+	    
+	    break ; /* end special */
+	case 1 :  /* REGIMM */
+	  {
+	    op = jtype_op(inst) ; /* branch condition */
+	    switch (jtype_op(inst))
+	      {
+	      case 0 : /* BLTZ */
+	      case 2 : /* BLTXL */
+	      case 16 : /* BLTZALL */
+	      case 18 : /* BLTZALL */
+	      less_branch:
+		if (read_register(itype_rs(inst)) < 0)
+		  pc += mips32_relative_offset(inst) + 4 ;
+		else pc += 8 ;  /* after the delay slot */
+	      break ;
+	      case 1 : /* GEZ */
+	      case 3 : /* BGEZL */
+	      case 17 : /* BGEZAL */
+	      case 19 : /* BGEZALL */
+	      greater_equal_branch:
+	      if (read_register(itype_rs(inst)) >= 0)
+		  pc += mips32_relative_offset(inst) + 4 ;
+	      else pc += 8 ; /* after the delay slot */
+	      break ;
+	      /* All of the other intructions in the REGIMM catagory */
+	      default: pc += 4 ;
+	      }
+	  }
+	  break ; /* end REGIMM */
+	case 2 :  /* J */
+	case 3 :  /* JAL */
+	  { unsigned long reg ;
+	    reg = jtype_target(inst) << 2 ;
+	    pc = reg + ((pc+4) & 0xf0000000)  ;
+	    /* Whats this mysterious 0xf000000 adjustment ??? */
+	  }
+	  break ;
+	  /* FIXME case JALX :*/
+	  { unsigned long reg ;
+	    reg = jtype_target(inst) << 2 ;
+	    pc = reg + ((pc+4) & 0xf0000000) + 1 ; /* yes, +1 */
+	    /* Add 1 to indicate 16 bit mode - Invert ISA mode */
+	  }
+	  break ; /* The new PC will be alternate mode */
+	case 4 :     /* BEQ , BEQL */
+	  equal_branch :
+	   if (read_register(itype_rs(inst)) ==
+	       read_register(itype_rt(inst)))
+	     pc += mips32_relative_offset(inst) + 4 ;
+	   else pc += 8 ;
+	   break ;
+	case 5 : /* BNE , BNEL */
+	  neq_branch :
+	  if (read_register(itype_rs(inst)) != 
+	      read_register(itype_rs(inst)))
+	    pc += mips32_relative_offset(inst) + 4 ;
+	  else pc += 8 ;
+	  break ;
+	case 6 : /* BLEZ , BLEZL */
+	less_zero_branch:
+	  if (read_register(itype_rs(inst) <= 0))
+	     pc += mips32_relative_offset(inst) + 4 ;
+	  else pc += 8 ;
+	  break ;
+	case 7 :
+	greater_branch :   /* BGTZ BGTZL */
+	  if (read_register(itype_rs(inst) > 0))
+	    pc += mips32_relative_offset(inst) + 4 ;
+	  else pc += 8 ;
+	break ;
+	default : pc += 8 ;
+	} /* switch */
+    }  /* else */
+  return pc ;
+} /* mips32_next_pc */
+
+/* Decoding the next place to set a breakpoint is irregular for the
+   mips 16 variant, but fortunatly, there fewer instructions. We have to cope
+   ith extensions for 16 bit instructions and a pair of actual 32 bit instructions.
+   We dont want to set a single step instruction on the extend instruction
+   either.
+   */
+
+/* Lots of mips16 instruction formats */
+/* Predicting jumps requires itype,ritype,i8type
+   and their extensions      extItype,extritype,extI8type
+   */
+enum mips16_inst_fmts
+{
+  itype,          /* 0  immediate 5,10 */
+  ritype,         /* 1   5,3,8 */
+  rrtype,         /* 2   5,3,3,5 */
+  rritype,        /* 3   5,3,3,5 */
+  rrrtype,        /* 4   5,3,3,3,2 */ 
+  rriatype,       /* 5   5,3,3,1,4 */ 
+  shifttype,      /* 6   5,3,3,3,2 */
+  i8type,         /* 7   5,3,8 */
+  i8movtype,      /* 8   5,3,3,5 */
+  i8mov32rtype,   /* 9   5,3,5,3 */
+  i64type,        /* 10  5,3,8 */
+  ri64type,       /* 11  5,3,3,5 */
+  jalxtype,       /* 12  5,1,5,5,16 - a 32 bit instruction */
+  exiItype,       /* 13  5,6,5,5,1,1,1,1,1,1,5 */
+  extRitype,      /* 14  5,6,5,5,3,1,1,1,5 */
+  extRRItype,     /* 15  5,5,5,5,3,3,5 */
+  extRRIAtype,    /* 16  5,7,4,5,3,3,1,4 */
+  EXTshifttype,   /* 17  5,5,1,1,1,1,1,1,5,3,3,1,1,1,2 */
+  extI8type,      /* 18  5,6,5,5,3,1,1,1,5 */
+  extI64type,     /* 19  5,6,5,5,3,1,1,1,5 */
+  extRi64type,    /* 20  5,6,5,5,3,3,5 */
+  extshift64type  /* 21  5,5,1,1,1,1,1,1,5,1,1,1,3,5 */
+} ;
+/* I am heaping all the fields of the formats into one structure and then,
+   only the fields which are involved in instruction extension */
+struct upk_mips16
+{
+  unsigned short inst ;
+  enum mips16_inst_fmts fmt ;
+  unsigned long offset ;
+  unsigned int regx ; /* Function in i8 type */
+  unsigned int regy ;
+} ;
+
+
+
+static void print_unpack(char * comment,
+			 struct upk_mips16 * u)
+{
+  printf("%s %04x ,f(%d) off(%08x) (x(%x) y(%x)\n",
+	 comment,u->inst,u->fmt,u->offset,u->regx,u->regy) ;
+}
+
+/* The EXT-I, EXT-ri nad EXT-I8 instructions all have the same
+   format for the bits which make up the immediatate extension.
+   */
+static unsigned long
+extended_offset(unsigned long extension)
+{
+  unsigned long value  ;
+  value = (extension >> 21) & 0x3f ; /* * extract 15:11 */
+  value = value << 6 ;
+  value |= (extension >> 16) & 0x1f ; /* extrace 10:5 */
+  value = value << 5 ;
+  value |= extension & 0x01f ; 	/* extract 4:0 */
+  return value ;
+}
+
+/* Only call this function if you know that this is an extendable
+   instruction, It wont malfunction, but why make excess remote memory references?
+   If the immediate operands get sign extended or somthing, do it after
+   the extension is performed.
+   */
+/* FIXME: Every one of these cases needs to worry about sign extension
+   when the offset is to be used in relative addressing */
+
+
+static unsigned short fetch_mips_16(CORE_ADDR pc)
+{
+  char buf[8] ;
+  pc &= 0xfffffffe ; /* clear the low order bit */
+  target_read_memory(pc,buf,2) ;
+  return extract_unsigned_integer(buf,2) ;
+}
+
+static void
+unpack_mips16(CORE_ADDR pc,
+		  struct upk_mips16 * upk)
+{
+  CORE_ADDR extpc ;
+  unsigned long extension ;
+  int extended ;
+  extpc = (pc - 4) & ~0x01 ; /* Extensions are 32 bit instructions */
+  /* Decrement to previous address and loose the 16bit mode flag */
+  /* return if the instruction was extendable, but not actually extended */
+  extended = ((mips32_op(extension) == 30) ? 1 : 0) ;
+  if (extended) { extension = mips_fetch_instruction(extpc) ;}
+  switch (upk->fmt)
+    {
+    case itype :
+      {
+	unsigned long value  ;
+	if (extended)
+	  { value = extended_offset(extension) ;
+	  value = value << 11 ;            /* rom for the original value */
+	  value |= upk->inst & 0x7ff ;    /* eleven bits from instruction */
+	  }
+	else
+	  { value = upk->inst & 0x7ff ;
+	  /* FIXME : Consider sign extension */
+	  }
+	upk->offset = value ;
+      }
+      break ;
+    case ritype :
+    case i8type :
+      { /* A register identifier and an offset */
+	/* Most of the fields are the same as I type but the
+	   immediate value is of a different length */
+	unsigned long value  ;
+	if (extended)
+	  {
+	    value = extended_offset(extension) ;
+	    value = value << 8  ;          /* from the original instruction */
+	    value |= upk->inst & 0xff ;    /* eleven bits from instruction */
+	    upk->regx = (extension >> 8) & 0x07 ; /* or i8 funct */
+	    if (value & 0x4000) /* test the sign bit , bit 26 */
+	      {	value &= ~ 0x3fff ; /* remove the sign bit */
+		value = -value ;
+	      }
+	  }
+	else {
+	  value = upk->inst & 0xff ;  /* 8 bits */
+	  upk->regx = (upk->inst >> 8) & 0x07 ; /* or i8 funct */
+	  /* FIXME: Do sign extension , this format needs it */
+	  if (value & 0x80)   /* THIS CONFUSES ME */
+	    { value &= 0xef ; /* remove the sign bit */
+	      value = -value ;
+	    }
+	  
+	}
+	upk->offset = value ;
+	break ;
+      }
+    case jalxtype :
+      {
+	unsigned long value ;
+	unsigned short nexthalf ;
+	value = ((upk->inst & 0x1f)  << 5) | ((upk->inst >> 5) & 0x1f) ;
+	value = value << 16 ;
+	nexthalf = mips_fetch_instruction(pc+2) ; /* low bit still set */
+	value |= nexthalf ;
+	upk->offset = value ;
+	break ;
+      }
+    default:
+      printf_filtered("Decoding unimplemented instruction format type\n") ;
+      break ;
+    }
+  /* print_unpack("UPK",upk) ; */
+}
+
+
+#define mips16_op(x) (x >> 11)
+
+/* This is a map of the opcodes which ae known to perform branches */
+static unsigned char map16[32] =
+{ 0,0,1,1,1,1,0,0,
+  0,0,0,0,1,0,0,0,
+  0,0,0,0,0,0,0,0,
+  0,0,0,0,0,1,1,0
+} ;
+
+static CORE_ADDR add_offset_16(CORE_ADDR pc, int offset)
+{
+  return ((offset << 2) | ((pc + 2) & (0xf0000000))) ;
+  
+}
+
+
+
+static struct upk_mips16 upk ;
+
+CORE_ADDR mips16_next_pc(CORE_ADDR pc)
+{
+  int op ;
+  t_inst inst ;
+  /* inst = mips_fetch_instruction(pc) ; - This doesnt always work */
+  inst = fetch_mips_16(pc) ;
+  upk.inst = inst ;
+  op = mips16_op(upk.inst) ;
+  if (map16[op])
+    {
+      int reg ;
+      switch (op)
+	{
+	case 2 : /* Branch */
+	  upk.fmt = itype ;
+	  unpack_mips16(pc,&upk) ;
+	  { long offset ;
+	    offset = upk.offset ;
+	    if (offset & 0x800)
+	      { offset &= 0xeff ;
+		offset = - offset ;
+	      }
+	    pc += (offset << 1) + 2 ;
+	  }
+	  break ;
+	case 3 : /* JAL , JALX - Watch out, these are 32 bit instruction*/
+	   upk.fmt = jalxtype ;
+	   unpack_mips16(pc,&upk) ;
+	   pc = add_offset_16(pc,upk.offset) ;
+	   if ((upk.inst >> 10) & 0x01) /* Exchange mode */
+	     pc = pc & ~ 0x01 ; /* Clear low bit, indicate 32 bit mode */
+	   else pc |= 0x01 ;
+	  break ;
+	case 4 : /* beqz */
+	    upk.fmt = ritype ;
+	    unpack_mips16(pc,&upk) ;
+	    reg = read_register(upk.regx) ;
+	    if (reg == 0) 
+		pc += (upk.offset << 1) + 2 ;
+	    else pc += 2 ;
+	  break ;
+	case 5 : /* bnez */
+	    upk.fmt = ritype ;
+	    unpack_mips16(pc,&upk) ;
+	    reg = read_register(upk.regx) ;
+	    if (reg != 0)
+	       pc += (upk.offset << 1) + 2 ;
+	    else pc += 2 ;
+	  break ;
+	case 12 : /* I8 Formats btez btnez */
+	    upk.fmt = i8type ;
+	    unpack_mips16(pc,&upk) ;
+	    /* upk.regx contains the opcode */
+	    reg = read_register(24) ; /* Test register is 24 */
+	    if (((upk.regx == 0) && (reg == 0))        /* BTEZ */
+		|| ((upk.regx == 1 ) && (reg != 0))) /* BTNEZ */
+	      /* pc = add_offset_16(pc,upk.offset) ; */
+	      pc += (upk.offset << 1) + 2 ; 
+	    else pc += 2 ;
+	  break ;
+	case 29 : /* RR Formats JR, JALR, JALR-RA */
+	  upk.fmt = rrtype ;
+	  op = upk.inst & 0x1f ;
+	  if (op == 0)
+	    { 
+	      upk.regx = (upk.inst >> 8) & 0x07 ;
+	      upk.regy = (upk.inst >> 5) & 0x07 ;
+	      switch (upk.regy)
+		{
+		case 0 : reg = upk.regx ;   break ;
+		case 1 :   reg = 31 ;       break ; /* Function return instruction*/
+		case 2 :   reg = upk.regx ; break ;
+		default:   reg = 31 ; break ; /* BOGUS Guess */
+		}
+	      pc = read_register(reg) ;
+	    }
+	  else pc += 2 ;
+	  break ;
+	case 30 : /* This is an extend instruction */
+	  pc += 4 ; /* Dont be setting breakpints on the second half */
+	  break ;
+	default :
+	  printf("Filtered - next PC probably incorrrect due to jump inst\n");
+	  pc += 2 ;
+	  break ;
+	}
+    }
+  else pc+= 2 ; /* just a good old instruction */
+  /* See if we CAN actually break on the next instruction */
+  /* printf("NXTm16PC %08x\n",(unsigned long)pc) ; */
+  return pc ;
+} /* mips16_next_pc */
+
+/* The mips_next_pc function supports single_tep when the remote target monitor or
+   stub is not developed enough to so a single_step.
+   It works by decoding the current instruction and predicting where a branch
+   will go. This isnt hard because all the data is available.
+   The MIPS32 and MIPS16 variants are quite different
+   */
+CORE_ADDR mips_next_pc(CORE_ADDR pc)
+{
+  t_inst inst ;
+  /* inst = mips_fetch_instruction(pc) ; */
+  /* if (pc_is_mips16) <----- This is failing */
+  if (pc & 0x01) 
+    return mips16_next_pc(pc) ;
+  else return mips32_next_pc(pc) ;
+} /* mips_next_pc */
+
+/* Guaranteed to set fci->saved_regs to some values (it never leaves it
+   NULL).  */
+
+void
+mips_find_saved_regs (fci)
+     struct frame_info *fci;
+{
+  int ireg;
+  CORE_ADDR reg_position;
+  /* r0 bit means kernel trap */
+  int kernel_trap;
+  /* What registers have been saved?  Bitmasks.  */
+  unsigned long gen_mask, float_mask;
+  mips_extra_func_info_t proc_desc;
+  t_inst inst;
+
+  frame_saved_regs_zalloc (fci);
+
+  /* If it is the frame for sigtramp, the saved registers are located
+     in a sigcontext structure somewhere on the stack.
+     If the stack layout for sigtramp changes we might have to change these
+     constants and the companion fixup_sigtramp in mdebugread.c  */
+#ifndef SIGFRAME_BASE
+/* To satisfy alignment restrictions, sigcontext is located 4 bytes
+   above the sigtramp frame.  */
+#define SIGFRAME_BASE		MIPS_REGSIZE
+/* FIXME!  Are these correct?? */
+#define SIGFRAME_PC_OFF		(SIGFRAME_BASE + 2 * MIPS_REGSIZE)
+#define SIGFRAME_REGSAVE_OFF	(SIGFRAME_BASE + 3 * MIPS_REGSIZE)
+#define SIGFRAME_FPREGSAVE_OFF	\
+        (SIGFRAME_REGSAVE_OFF + MIPS_NUMREGS * MIPS_REGSIZE + 3 * MIPS_REGSIZE)
+#endif
+#ifndef SIGFRAME_REG_SIZE
+/* FIXME!  Is this correct?? */
+#define SIGFRAME_REG_SIZE	MIPS_REGSIZE
+#endif
+  if (fci->signal_handler_caller)
+    {
+      for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
+	{
+ 	  reg_position = fci->frame + SIGFRAME_REGSAVE_OFF
+			 + ireg * SIGFRAME_REG_SIZE;
+ 	  fci->saved_regs[ireg] = reg_position;
+	}
+      for (ireg = 0; ireg < MIPS_NUMREGS; ireg++)
+	{
+ 	  reg_position = fci->frame + SIGFRAME_FPREGSAVE_OFF
+			 + ireg * SIGFRAME_REG_SIZE;
+ 	  fci->saved_regs[FP0_REGNUM + ireg] = reg_position;
+	}
+      fci->saved_regs[PC_REGNUM] = fci->frame + SIGFRAME_PC_OFF;
+      return;
+    }
+
+  proc_desc = fci->proc_desc;
+  if (proc_desc == NULL)
+    /* I'm not sure how/whether this can happen.  Normally when we can't
+       find a proc_desc, we "synthesize" one using heuristic_proc_desc
+       and set the saved_regs right away.  */
+    return;
+
+  kernel_trap = PROC_REG_MASK(proc_desc) & 1;
+  gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK(proc_desc);
+  float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK(proc_desc);
+
+  if (/* In any frame other than the innermost or a frame interrupted by
+	 a signal, we assume that all registers have been saved.
+	 This assumes that all register saves in a function happen before
+	 the first function call.  */
+      (fci->next == NULL || fci->next->signal_handler_caller)
+
+      /* In a dummy frame we know exactly where things are saved.  */
+      && !PROC_DESC_IS_DUMMY (proc_desc)
+
+      /* Don't bother unless we are inside a function prologue.  Outside the
+	 prologue, we know where everything is. */
+
+      && in_prologue (fci->pc, PROC_LOW_ADDR (proc_desc))
+
+      /* Not sure exactly what kernel_trap means, but if it means
+	 the kernel saves the registers without a prologue doing it,
+	 we better not examine the prologue to see whether registers
+	 have been saved yet.  */
+      && !kernel_trap)
+    {
+      /* We need to figure out whether the registers that the proc_desc
+	 claims are saved have been saved yet.  */
+
+      CORE_ADDR addr;
+
+      /* Bitmasks; set if we have found a save for the register.  */
+      unsigned long gen_save_found = 0;
+      unsigned long float_save_found = 0;
+      int instlen;
+
+      /* If the address is odd, assume this is MIPS16 code.  */
+      addr = PROC_LOW_ADDR (proc_desc);
+      instlen = pc_is_mips16 (addr) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
+      /* Scan through this function's instructions preceding the current
+         PC, and look for those that save registers.  */
+      while (addr < fci->pc)
+	{
+	  inst = mips_fetch_instruction (addr);
+	  if (pc_is_mips16 (addr))
+	    mips16_decode_reg_save (inst, &gen_save_found);
+	  else
+	    mips32_decode_reg_save (inst, &gen_save_found, &float_save_found);
+	  addr += instlen;
+	}
+      gen_mask = gen_save_found;
+      float_mask = float_save_found;
+    }
+
+  /* Fill in the offsets for the registers which gen_mask says
+     were saved.  */
+  reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+  for (ireg= MIPS_NUMREGS-1; gen_mask; --ireg, gen_mask <<= 1)
+    if (gen_mask & 0x80000000)
+      {
+	fci->saved_regs[ireg] = reg_position;
+	reg_position -= MIPS_REGSIZE;
+      }
+
+  /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse order
+     of that normally used by gcc.  Therefore, we have to fetch the first
+     instruction of the function, and if it's an entry instruction that
+     saves $s0 or $s1, correct their saved addresses.  */
+  if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc)))
+    {
+      inst = mips_fetch_instruction (PROC_LOW_ADDR (proc_desc));
+      if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+	{
+	  int reg;
+	  int sreg_count = (inst >> 6) & 3;
+	  
+	  /* Check if the ra register was pushed on the stack.  */
+	  reg_position = fci->frame + PROC_REG_OFFSET (proc_desc);
+	  if (inst & 0x20)
+	    reg_position -= MIPS_REGSIZE;
+
+	  /* Check if the s0 and s1 registers were pushed on the stack.  */
+	  for (reg = 16; reg < sreg_count+16; reg++)
+	    {
+	      fci->saved_regs[reg] = reg_position;
+	      reg_position -= MIPS_REGSIZE;
+	    }
+	}
+    }
+
+  /* Fill in the offsets for the registers which float_mask says
+     were saved.  */
+  reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc);
+
+  /* The freg_offset points to where the first *double* register
+     is saved.  So skip to the high-order word. */
+  if (! GDB_TARGET_IS_MIPS64)
+    reg_position += MIPS_REGSIZE;
+
+  /* Fill in the offsets for the float registers which float_mask says
+     were saved.  */
+  for (ireg = MIPS_NUMREGS-1; float_mask; --ireg, float_mask <<= 1)
+    if (float_mask & 0x80000000)
+      {
+	fci->saved_regs[FP0_REGNUM+ireg] = reg_position;
+	reg_position -= MIPS_REGSIZE;
+      }
+
+  fci->saved_regs[PC_REGNUM] = fci->saved_regs[RA_REGNUM];
+}
+
+static CORE_ADDR
+read_next_frame_reg(fi, regno)
+     struct frame_info *fi;
+     int regno;
+{
+  for (; fi; fi = fi->next)
+    {
+      /* We have to get the saved sp from the sigcontext
+	 if it is a signal handler frame.  */
+      if (regno == SP_REGNUM && !fi->signal_handler_caller)
+	return fi->frame;
+      else
+	{
+	  if (fi->saved_regs == NULL)
+	    mips_find_saved_regs (fi);
+	  if (fi->saved_regs[regno])
+	    return read_memory_integer(fi->saved_regs[regno], MIPS_REGSIZE);
+	}
+    }
+  return read_register (regno);
+}
+
+/* mips_addr_bits_remove - remove useless address bits  */
+
+CORE_ADDR
+mips_addr_bits_remove (addr)
+    CORE_ADDR addr;
+{
+#if GDB_TARGET_IS_MIPS64
+  if (mask_address_p && (addr >> 32 == (CORE_ADDR)0xffffffff))
+    {
+      /* This hack is a work-around for existing boards using PMON,
+	 the simulator, and any other 64-bit targets that doesn't have
+	 true 64-bit addressing.  On these targets, the upper 32 bits
+	 of addresses are ignored by the hardware.  Thus, the PC or SP
+	 are likely to have been sign extended to all 1s by instruction
+	 sequences that load 32-bit addresses.  For example, a typical
+	 piece of code that loads an address is this:
+		lui $r2, <upper 16 bits>
+		ori $r2, <lower 16 bits>
+	 But the lui sign-extends the value such that the upper 32 bits
+	 may be all 1s.  The workaround is simply to mask off these bits.
+	 In the future, gcc may be changed to support true 64-bit
+	 addressing, and this masking will have to be disabled.  */
+        addr &= (CORE_ADDR)0xffffffff;
+    }
+#else
+  /* Even when GDB is configured for some 32-bit targets (e.g. mips-elf),
+     BFD is configured to handle 64-bit targets, so CORE_ADDR is 64 bits.
+     So we still have to mask off useless bits from addresses.  */
+  addr &= (CORE_ADDR)0xffffffff;
+#endif
+
+  return addr;
+}
+
+void
+mips_init_frame_pc_first (fromleaf, prev)
+     int fromleaf;
+     struct frame_info *prev;
+{
+  CORE_ADDR pc, tmp;
+
+  pc = ((fromleaf) ? SAVED_PC_AFTER_CALL (prev->next) :
+        prev->next ? FRAME_SAVED_PC (prev->next) : read_pc ());
+  tmp = mips_skip_stub (pc);
+  prev->pc =  tmp ? tmp : pc;
+}
+
+
+CORE_ADDR
+mips_frame_saved_pc(frame)
+     struct frame_info *frame;
+{
+  CORE_ADDR saved_pc;
+  mips_extra_func_info_t proc_desc = frame->proc_desc;
+  /* We have to get the saved pc from the sigcontext
+     if it is a signal handler frame.  */
+  int pcreg = frame->signal_handler_caller ? PC_REGNUM
+	      : (proc_desc ? PROC_PC_REG(proc_desc) : RA_REGNUM);
+
+  if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+    saved_pc = read_memory_integer(frame->frame - MIPS_REGSIZE, MIPS_REGSIZE);
+  else
+    saved_pc = read_next_frame_reg(frame, pcreg);
+
+  return ADDR_BITS_REMOVE (saved_pc);
+}
+
+static struct mips_extra_func_info temp_proc_desc;
+static struct frame_saved_regs temp_saved_regs;
+
+/* Set a register's saved stack address in temp_saved_regs.  If an address
+   has already been set for this register, do nothing; this way we will
+   only recognize the first save of a given register in a function prologue.
+   This is a helper function for mips{16,32}_heuristic_proc_desc.  */
+
+static void
+set_reg_offset (regno, offset)
+     int regno;
+     CORE_ADDR offset;
+{
+  if (temp_saved_regs.regs[regno] == 0)
+    temp_saved_regs.regs[regno] = offset;
+}
+
+
+/* Test whether the PC points to the return instruction at the
+   end of a function. */
+
+static int 
+mips_about_to_return (pc)
+     CORE_ADDR pc;
+{
+  if (pc_is_mips16 (pc))
+    /* This mips16 case isn't necessarily reliable.  Sometimes the compiler
+       generates a "jr $ra"; other times it generates code to load
+       the return address from the stack to an accessible register (such
+       as $a3), then a "jr" using that register.  This second case
+       is almost impossible to distinguish from an indirect jump
+       used for switch statements, so we don't even try.  */
+    return mips_fetch_instruction (pc) == 0xe820;	/* jr $ra */
+  else
+    return mips_fetch_instruction (pc) == 0x3e00008;	/* jr $ra */
+}
+
+
+/* This fencepost looks highly suspicious to me.  Removing it also
+   seems suspicious as it could affect remote debugging across serial
+   lines.  */
+
+static CORE_ADDR
+heuristic_proc_start (pc)
+    CORE_ADDR pc;
+{
+    CORE_ADDR start_pc;
+    CORE_ADDR fence;
+    int instlen;
+    int seen_adjsp = 0;
+
+    pc = ADDR_BITS_REMOVE (pc);
+    start_pc = pc;
+    fence = start_pc - heuristic_fence_post;
+    if (start_pc == 0)	return 0;
+
+    if (heuristic_fence_post == UINT_MAX
+	|| fence < VM_MIN_ADDRESS)
+      fence = VM_MIN_ADDRESS;
+
+    instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN;
+
+    /* search back for previous return */
+    for (start_pc -= instlen; ; start_pc -= instlen)
+	if (start_pc < fence)
+	  {
+	    /* It's not clear to me why we reach this point when
+	       stop_soon_quietly, but with this test, at least we
+	       don't print out warnings for every child forked (eg, on
+	       decstation).  22apr93 rich@cygnus.com.  */
+	    if (!stop_soon_quietly)
+	      {
+		static int blurb_printed = 0;
+
+		if (fence == VM_MIN_ADDRESS)
+		  warning("Hit beginning of text section without finding");
+		else
+		  warning("Hit heuristic-fence-post without finding");
+		
+		warning("enclosing function for address 0x%s", paddr_nz (pc));
+		if (!blurb_printed)
+		  {
+		    printf_filtered ("\
+This warning occurs if you are debugging a function without any symbols\n\
+(for example, in a stripped executable).  In that case, you may wish to\n\
+increase the size of the search with the `set heuristic-fence-post' command.\n\
+\n\
+Otherwise, you told GDB there was a function where there isn't one, or\n\
+(more likely) you have encountered a bug in GDB.\n");
+		    blurb_printed = 1;
+		  }
+	      }
+
+	    return 0; 
+	  }
+	else if (pc_is_mips16 (start_pc))
+	  {
+	    unsigned short inst;
+
+	    /* On MIPS16, any one of the following is likely to be the
+	       start of a function:
+		 entry
+		 addiu sp,-n
+		 daddiu sp,-n
+		 extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n'  */
+	    inst = mips_fetch_instruction (start_pc);
+	    if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+		|| (inst & 0xff80) == 0x6380	/* addiu sp,-n */
+		|| (inst & 0xff80) == 0xfb80	/* daddiu sp,-n */
+		|| ((inst & 0xf810) == 0xf010 && seen_adjsp))	/* extend -n */
+	      break;
+	    else if ((inst & 0xff00) == 0x6300		/* addiu sp */
+		     || (inst & 0xff00) == 0xfb00)	/* daddiu sp */
+	      seen_adjsp = 1;
+	    else
+	      seen_adjsp = 0;
+	  }
+	else if (mips_about_to_return (start_pc))
+	  {
+	    start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */
+	    break;
+	  }
+
+#if 0
+    /* skip nops (usually 1) 0 - is this */
+    while (start_pc < pc && read_memory_integer (start_pc, MIPS_INSTLEN) == 0)
+	start_pc += MIPS_INSTLEN;
+#endif
+    return start_pc;
+}
+
+/* Fetch the immediate value from a MIPS16 instruction.
+   If the previous instruction was an EXTEND, use it to extend
+   the upper bits of the immediate value.  This is a helper function
+   for mips16_heuristic_proc_desc.  */
+
+static int
+mips16_get_imm (prev_inst, inst, nbits, scale, is_signed)
+    unsigned short prev_inst;	/* previous instruction */
+    unsigned short inst;	/* current instruction */
+    int nbits;			/* number of bits in imm field */
+    int scale;			/* scale factor to be applied to imm */
+    int is_signed;		/* is the imm field signed? */
+{
+  int offset;
+
+  if ((prev_inst & 0xf800) == 0xf000)	/* prev instruction was EXTEND? */
+    {
+      offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0);
+      if (offset & 0x8000)		/* check for negative extend */
+	offset = 0 - (0x10000 - (offset & 0xffff));
+      return offset | (inst & 0x1f);
+    }
+  else
+    {
+      int max_imm = 1 << nbits;
+      int mask = max_imm - 1;
+      int sign_bit = max_imm >> 1;
+
+      offset = inst & mask;
+      if (is_signed && (offset & sign_bit))
+	offset = 0 - (max_imm - offset);
+      return offset * scale;
+    }
+}
+
+
+/* Fill in values in temp_proc_desc based on the MIPS16 instruction
+   stream from start_pc to limit_pc.  */
+
+static void
+mips16_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
+    CORE_ADDR start_pc, limit_pc;
+    struct frame_info *next_frame;
+    CORE_ADDR sp;
+{
+  CORE_ADDR cur_pc;
+  CORE_ADDR frame_addr = 0;	/* Value of $r17, used as frame pointer */
+  unsigned short prev_inst = 0;	/* saved copy of previous instruction */
+  unsigned inst = 0;		/* current instruction */
+  unsigned entry_inst = 0;	/* the entry instruction */
+  int reg, offset;
+
+  PROC_FRAME_OFFSET(&temp_proc_desc) = 0;	/* size of stack frame */
+  PROC_FRAME_ADJUST(&temp_proc_desc) = 0;	/* offset of FP from SP */
+
+  for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN)
+    {
+      /* Save the previous instruction.  If it's an EXTEND, we'll extract
+         the immediate offset extension from it in mips16_get_imm.  */
+      prev_inst = inst;
+
+      /* Fetch and decode the instruction.   */
+      inst = (unsigned short) mips_fetch_instruction (cur_pc);
+      if ((inst & 0xff00) == 0x6300		/* addiu sp */
+	  || (inst & 0xff00) == 0xfb00)		/* daddiu sp */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 8, 8, 1);
+	  if (offset < 0)			/* negative stack adjustment? */
+	    PROC_FRAME_OFFSET(&temp_proc_desc) -= offset;
+	  else
+	    /* Exit loop if a positive stack adjustment is found, which
+	       usually means that the stack cleanup code in the function
+	       epilogue is reached.  */
+	    break;
+	}
+      else if ((inst & 0xf800) == 0xd000)	/* sw reg,n($sp) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+	  reg = mips16_to_32_reg[(inst & 0x700) >> 8];
+	  PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+	  set_reg_offset (reg, sp + offset);
+	}
+      else if ((inst & 0xff00) == 0xf900)	/* sd reg,n($sp) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+	  reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+	  PROC_REG_MASK(&temp_proc_desc) |= (1 << reg);
+	  set_reg_offset (reg, sp + offset);
+	}
+      else if ((inst & 0xff00) == 0x6200)	/* sw $ra,n($sp) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+	  PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+	  set_reg_offset (RA_REGNUM, sp + offset);
+	}
+      else if ((inst & 0xff00) == 0xfa00)	/* sd $ra,n($sp) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 8, 8, 0);
+	  PROC_REG_MASK(&temp_proc_desc) |= (1 << RA_REGNUM);
+	  set_reg_offset (RA_REGNUM, sp + offset);
+	}
+      else if (inst == 0x673d)			/* move $s1, $sp */
+	{
+	  frame_addr = sp;
+	  PROC_FRAME_REG (&temp_proc_desc) = 17;
+	}
+      else if ((inst & 0xff00) == 0x0100)	/* addiu $s1,sp,n */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 8, 4, 0);
+	  frame_addr = sp + offset;
+	  PROC_FRAME_REG (&temp_proc_desc) = 17;
+	  PROC_FRAME_ADJUST (&temp_proc_desc) = offset;
+	}
+      else if ((inst & 0xFF00) == 0xd900)	/* sw reg,offset($s1) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 5, 4, 0);
+	  reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+	  PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	  set_reg_offset (reg, frame_addr + offset);
+	}
+      else if ((inst & 0xFF00) == 0x7900)	/* sd reg,offset($s1) */
+	{
+	  offset = mips16_get_imm (prev_inst, inst, 5, 8, 0);
+	  reg = mips16_to_32_reg[(inst & 0xe0) >> 5];
+	  PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	  set_reg_offset (reg, frame_addr + offset);
+	}
+      else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */
+	entry_inst = inst;			/* save for later processing */
+      else if ((inst & 0xf800) == 0x1800)	/* jal(x) */
+	cur_pc += MIPS16_INSTLEN;		/* 32-bit instruction */
+    }
+
+    /* The entry instruction is typically the first instruction in a function,
+       and it stores registers at offsets relative to the value of the old SP
+       (before the prologue).  But the value of the sp parameter to this
+       function is the new SP (after the prologue has been executed).  So we
+       can't calculate those offsets until we've seen the entire prologue,
+       and can calculate what the old SP must have been. */
+    if (entry_inst != 0)
+      {
+	int areg_count = (entry_inst >> 8) & 7;
+	int sreg_count = (entry_inst >> 6) & 3;
+
+	/* The entry instruction always subtracts 32 from the SP.  */
+	PROC_FRAME_OFFSET(&temp_proc_desc) += 32;
+
+	/* Now we can calculate what the SP must have been at the
+	   start of the function prologue.  */
+	sp += PROC_FRAME_OFFSET(&temp_proc_desc);
+
+	/* Check if a0-a3 were saved in the caller's argument save area.  */
+	for (reg = 4, offset = 0; reg < areg_count+4; reg++)
+	  {
+	    PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	    set_reg_offset (reg, sp + offset);
+	    offset += MIPS_REGSIZE;
+	  }
+
+	/* Check if the ra register was pushed on the stack.  */
+	offset = -4;
+	if (entry_inst & 0x20)
+	  {
+	    PROC_REG_MASK(&temp_proc_desc) |= 1 << RA_REGNUM;
+	    set_reg_offset (RA_REGNUM, sp + offset);
+	    offset -= MIPS_REGSIZE;
+	  }
+
+	/* Check if the s0 and s1 registers were pushed on the stack.  */
+	for (reg = 16; reg < sreg_count+16; reg++)
+	  {
+	    PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	    set_reg_offset (reg, sp + offset);
+	    offset -= MIPS_REGSIZE;
+	  }
+      }
+}
+
+static void
+mips32_heuristic_proc_desc(start_pc, limit_pc, next_frame, sp)
+    CORE_ADDR start_pc, limit_pc;
+    struct frame_info *next_frame;
+    CORE_ADDR sp;
+{
+  CORE_ADDR cur_pc;
+  CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */
+restart:
+  memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+  PROC_FRAME_OFFSET(&temp_proc_desc) = 0;
+  PROC_FRAME_ADJUST (&temp_proc_desc) = 0;	/* offset of FP from SP */
+  for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN)
+    {
+      unsigned long inst, high_word, low_word;
+      int reg;
+
+      /* Fetch the instruction.   */
+      inst = (unsigned long) mips_fetch_instruction (cur_pc);
+
+      /* Save some code by pre-extracting some useful fields.  */
+      high_word = (inst >> 16) & 0xffff;
+      low_word = inst & 0xffff;
+      reg = high_word & 0x1f;
+
+      if (high_word == 0x27bd		/* addiu $sp,$sp,-i */
+	  || high_word == 0x23bd	/* addi $sp,$sp,-i */
+	  || high_word == 0x67bd)	/* daddiu $sp,$sp,-i */
+	{
+	  if (low_word & 0x8000)	/* negative stack adjustment? */
+	    PROC_FRAME_OFFSET(&temp_proc_desc) += 0x10000 - low_word;
+	  else
+	    /* Exit loop if a positive stack adjustment is found, which
+	       usually means that the stack cleanup code in the function
+	       epilogue is reached.  */
+	    break;
+	}
+      else if ((high_word & 0xFFE0) == 0xafa0)	/* sw reg,offset($sp) */
+	{
+	  PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	  set_reg_offset (reg, sp + low_word);
+	}
+      else if ((high_word & 0xFFE0) == 0xffa0)	/* sd reg,offset($sp) */
+	{
+	  /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra,
+	     but the register size used is only 32 bits. Make the address
+	     for the saved register point to the lower 32 bits.  */
+	  PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	  set_reg_offset (reg, sp + low_word + 8 - MIPS_REGSIZE);
+	}
+      else if (high_word == 0x27be)			/* addiu $30,$sp,size */
+	{
+	  /* Old gcc frame, r30 is virtual frame pointer.  */
+	  if ((long)low_word != PROC_FRAME_OFFSET(&temp_proc_desc))
+	      frame_addr = sp + low_word;
+	  else if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+	    {
+	      unsigned alloca_adjust;
+	      PROC_FRAME_REG (&temp_proc_desc) = 30;
+	      frame_addr = read_next_frame_reg(next_frame, 30);
+	      alloca_adjust = (unsigned)(frame_addr - (sp + low_word));
+	      if (alloca_adjust > 0)
+		{
+		  /* FP > SP + frame_size. This may be because
+		   * of an alloca or somethings similar.
+		   * Fix sp to "pre-alloca" value, and try again.
+		   */
+		  sp += alloca_adjust;
+		  goto restart;
+		}
+	    }
+	}
+     /* move $30,$sp.  With different versions of gas this will be either
+       `addu $30,$sp,$zero' or `or $30,$sp,$zero' or `daddu 30,sp,$0'.
+	Accept any one of these.  */
+      else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+	{
+	  /* New gcc frame, virtual frame pointer is at r30 + frame_size.  */
+	  if (PROC_FRAME_REG (&temp_proc_desc) == SP_REGNUM)
+	    {
+	      unsigned alloca_adjust;
+	      PROC_FRAME_REG (&temp_proc_desc) = 30;
+	      frame_addr = read_next_frame_reg(next_frame, 30);
+	      alloca_adjust = (unsigned)(frame_addr - sp);
+	      if (alloca_adjust > 0)
+		{
+		  /* FP > SP + frame_size. This may be because
+		   * of an alloca or somethings similar.
+		   * Fix sp to "pre-alloca" value, and try again.
+		   */
+		  sp += alloca_adjust;
+		  goto restart;
+		}
+	    }
+	}
+      else if ((high_word & 0xFFE0) == 0xafc0)		/* sw reg,offset($30) */
+	{
+	  PROC_REG_MASK(&temp_proc_desc) |= 1 << reg;
+	  set_reg_offset (reg, frame_addr + low_word);
+	}
+    }
+}
+
+static mips_extra_func_info_t
+heuristic_proc_desc(start_pc, limit_pc, next_frame)
+    CORE_ADDR start_pc, limit_pc;
+    struct frame_info *next_frame;
+{
+  CORE_ADDR sp = read_next_frame_reg (next_frame, SP_REGNUM);
+
+  if (start_pc == 0) return NULL;
+  memset (&temp_proc_desc, '\0', sizeof(temp_proc_desc));
+  memset (&temp_saved_regs, '\0', sizeof(struct frame_saved_regs));
+  PROC_LOW_ADDR (&temp_proc_desc) = start_pc;
+  PROC_FRAME_REG (&temp_proc_desc) = SP_REGNUM;
+  PROC_PC_REG (&temp_proc_desc) = RA_REGNUM;
+
+  if (start_pc + 200 < limit_pc)
+    limit_pc = start_pc + 200;
+  if (pc_is_mips16 (start_pc))
+    mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+  else
+    mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp);
+  return &temp_proc_desc;
+}
+
+static mips_extra_func_info_t
+non_heuristic_proc_desc (pc, addrptr)
+     CORE_ADDR pc;
+     CORE_ADDR *addrptr;
+{
+  CORE_ADDR startaddr;
+  mips_extra_func_info_t proc_desc;
+  struct block *b = block_for_pc(pc);
+  struct symbol *sym;
+
+  find_pc_partial_function (pc, NULL, &startaddr, NULL);
+  if (addrptr)
+    *addrptr = startaddr;
+  if (b == NULL || PC_IN_CALL_DUMMY (pc, 0, 0))
+    sym = NULL;
+  else
+    {
+      if (startaddr > BLOCK_START (b))
+	/* This is the "pathological" case referred to in a comment in
+	   print_frame_info.  It might be better to move this check into
+	   symbol reading.  */
+	sym = NULL;
+      else
+	sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_NAMESPACE, 0, NULL);
+    }
+
+  /* If we never found a PDR for this function in symbol reading, then
+     examine prologues to find the information.  */
+  if (sym)
+    {
+      proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym);
+      if (PROC_FRAME_REG (proc_desc) == -1)
+	return NULL;
+      else
+	return proc_desc;
+    }
+  else
+    return NULL;
+}
+
+
+static mips_extra_func_info_t
+find_proc_desc (pc, next_frame)
+     CORE_ADDR pc;
+     struct frame_info *next_frame;
+{
+  mips_extra_func_info_t proc_desc;
+  CORE_ADDR startaddr;
+
+  proc_desc = non_heuristic_proc_desc (pc, &startaddr);
+
+  if (proc_desc)
+    {
+      /* IF this is the topmost frame AND
+       * (this proc does not have debugging information OR
+       * the PC is in the procedure prologue)
+       * THEN create a "heuristic" proc_desc (by analyzing
+       * the actual code) to replace the "official" proc_desc.
+       */
+      if (next_frame == NULL)
+	{
+	  struct symtab_and_line val;
+	  struct symbol *proc_symbol =
+	      PROC_DESC_IS_DUMMY(proc_desc) ? 0 : PROC_SYMBOL(proc_desc);
+
+	  if (proc_symbol)
+	    {
+	      val = find_pc_line (BLOCK_START
+				  (SYMBOL_BLOCK_VALUE(proc_symbol)),
+				  0);
+	      val.pc = val.end ? val.end : pc;
+	    }
+	  if (!proc_symbol || pc < val.pc)
+	    {
+	      mips_extra_func_info_t found_heuristic =
+		heuristic_proc_desc (PROC_LOW_ADDR (proc_desc),
+				     pc, next_frame);
+	      if (found_heuristic)
+		proc_desc = found_heuristic;
+	    }
+	}
+    }
+  else
+    {
+      /* Is linked_proc_desc_table really necessary?  It only seems to be used
+	 by procedure call dummys.  However, the procedures being called ought
+	 to have their own proc_descs, and even if they don't,
+	 heuristic_proc_desc knows how to create them! */
+
+      register struct linked_proc_info *link;
+
+      for (link = linked_proc_desc_table; link; link = link->next)
+	if (PROC_LOW_ADDR(&link->info) <= pc
+	    && PROC_HIGH_ADDR(&link->info) > pc)
+	  return &link->info;
+
+      if (startaddr == 0)
+	startaddr = heuristic_proc_start (pc);
+
+      proc_desc =
+	heuristic_proc_desc (startaddr, pc, next_frame);
+    }
+  return proc_desc;
+}
+
+static CORE_ADDR
+get_frame_pointer(frame, proc_desc)
+    struct frame_info *frame;
+    mips_extra_func_info_t proc_desc;
+{
+  return ADDR_BITS_REMOVE (
+    read_next_frame_reg (frame, PROC_FRAME_REG (proc_desc)) +
+      PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc));
+}
+
+mips_extra_func_info_t cached_proc_desc;
+
+CORE_ADDR
+mips_frame_chain(frame)
+    struct frame_info *frame;
+{
+  mips_extra_func_info_t proc_desc;
+  CORE_ADDR tmp;
+  CORE_ADDR saved_pc = FRAME_SAVED_PC(frame);
+
+  if (saved_pc == 0 || inside_entry_file (saved_pc))
+    return 0;
+
+  /* Check if the PC is inside a call stub.  If it is, fetch the
+     PC of the caller of that stub.  */
+  if ((tmp = mips_skip_stub (saved_pc)) != 0)
+    saved_pc = tmp;
+
+  /* Look up the procedure descriptor for this PC.  */
+  proc_desc = find_proc_desc(saved_pc, frame);
+  if (!proc_desc)
+    return 0;
+
+  cached_proc_desc = proc_desc;
+
+  /* If no frame pointer and frame size is zero, we must be at end
+     of stack (or otherwise hosed).  If we don't check frame size,
+     we loop forever if we see a zero size frame.  */
+  if (PROC_FRAME_REG (proc_desc) == SP_REGNUM
+      && PROC_FRAME_OFFSET (proc_desc) == 0
+      /* The previous frame from a sigtramp frame might be frameless
+	 and have frame size zero.  */
+      && !frame->signal_handler_caller)
+    return 0;
+  else
+    return get_frame_pointer (frame, proc_desc);
+}
+
+void
+init_extra_frame_info(fci)
+     struct frame_info *fci;
+{
+  int regnum;
+
+  /* Use proc_desc calculated in frame_chain */
+  mips_extra_func_info_t proc_desc =
+    fci->next ? cached_proc_desc : find_proc_desc(fci->pc, fci->next);
+
+  fci->saved_regs = NULL;
+  fci->proc_desc =
+    proc_desc == &temp_proc_desc ? 0 : proc_desc;
+  if (proc_desc)
+    {
+      /* Fixup frame-pointer - only needed for top frame */
+      /* This may not be quite right, if proc has a real frame register.
+	 Get the value of the frame relative sp, procedure might have been
+	 interrupted by a signal at it's very start.  */
+      if (fci->pc == PROC_LOW_ADDR (proc_desc)
+	  && !PROC_DESC_IS_DUMMY (proc_desc))
+	fci->frame = read_next_frame_reg (fci->next, SP_REGNUM);
+      else
+	fci->frame = get_frame_pointer (fci->next, proc_desc);
+
+      if (proc_desc == &temp_proc_desc)
+	{
+	  char *name;
+
+	  /* Do not set the saved registers for a sigtramp frame,
+	     mips_find_saved_registers will do that for us.
+	     We can't use fci->signal_handler_caller, it is not yet set.  */
+	  find_pc_partial_function (fci->pc, &name,
+				    (CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+	  if (!IN_SIGTRAMP (fci->pc, name))
+	    {
+	      fci->saved_regs = (CORE_ADDR*)
+		frame_obstack_alloc (SIZEOF_FRAME_SAVED_REGS);
+	      memcpy (fci->saved_regs, temp_saved_regs.regs, SIZEOF_FRAME_SAVED_REGS);
+	      fci->saved_regs[PC_REGNUM]
+		= fci->saved_regs[RA_REGNUM];
+	    }
+	}
+
+      /* hack: if argument regs are saved, guess these contain args */
+      fci->num_args = -1;	/* assume we can't tell how many args for now */
+      for (regnum = MIPS_LAST_ARG_REGNUM; regnum >= A0_REGNUM; regnum--)
+	{
+	  if (PROC_REG_MASK(proc_desc) & (1 << regnum))
+	    {
+	      fci->num_args = regnum - A0_REGNUM + 1;
+	      break;
+	    }
+	} 
+    }
+}
+
+/* MIPS stack frames are almost impenetrable.  When execution stops,
+   we basically have to look at symbol information for the function
+   that we stopped in, which tells us *which* register (if any) is
+   the base of the frame pointer, and what offset from that register
+   the frame itself is at.  
+
+   This presents a problem when trying to examine a stack in memory
+   (that isn't executing at the moment), using the "frame" command.  We
+   don't have a PC, nor do we have any registers except SP.
+
+   This routine takes two arguments, SP and PC, and tries to make the
+   cached frames look as if these two arguments defined a frame on the
+   cache.  This allows the rest of info frame to extract the important
+   arguments without difficulty.  */
+
+struct frame_info *
+setup_arbitrary_frame (argc, argv)
+     int argc;
+     CORE_ADDR *argv;
+{
+  if (argc != 2)
+    error ("MIPS frame specifications require two arguments: sp and pc");
+
+  return create_new_frame (argv[0], argv[1]);
+}
+
+/*
+ * STACK_ARGSIZE -- how many bytes does a pushed function arg take up on the stack?
+ *
+ * For n32 ABI, eight.
+ * For all others, he same as the size of a general register.
+ */
+#if defined (_MIPS_SIM_NABI32) && _MIPS_SIM == _MIPS_SIM_NABI32
+#define MIPS_NABI32   1
+#define STACK_ARGSIZE 8
+#else
+#define MIPS_NABI32   0
+#define STACK_ARGSIZE MIPS_REGSIZE
+#endif
+
+CORE_ADDR
+mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  int argreg;
+  int float_argreg;
+  int argnum;
+  int len = 0;
+  int stack_offset = 0;
+
+  /* Macros to round N up or down to the next A boundary; A must be
+     a power of two. */
+#define ROUND_DOWN(n,a) ((n) & ~((a)-1))
+#define ROUND_UP(n,a) (((n)+(a)-1) & ~((a)-1))
+  
+  /* First ensure that the stack and structure return address (if any)
+     are properly aligned. The stack has to be at least 64-bit aligned
+     even on 32-bit machines, because doubles must be 64-bit aligned.
+     On at least one MIPS variant, stack frames need to be 128-bit
+     aligned, so we round to this widest known alignment. */
+  sp = ROUND_DOWN (sp, 16);
+  struct_addr = ROUND_DOWN (struct_addr, MIPS_REGSIZE);
+      
+  /* Now make space on the stack for the args. We allocate more
+     than necessary for EABI, because the first few arguments are
+     passed in registers, but that's OK. */
+  for (argnum = 0; argnum < nargs; argnum++)
+    len += ROUND_UP (TYPE_LENGTH(VALUE_TYPE(args[argnum])), MIPS_REGSIZE);
+  sp -= ROUND_UP (len, 16);
+
+  /* Initialize the integer and float register pointers.  */
+  argreg = A0_REGNUM;
+  float_argreg = FPA0_REGNUM;
+
+  /* the struct_return pointer occupies the first parameter-passing reg */
+  if (struct_return)
+      write_register (argreg++, struct_addr);
+
+  /* Now load as many as possible of the first arguments into
+     registers, and push the rest onto the stack.  Loop thru args
+     from first to last.  */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      char *val;
+      char valbuf[MAX_REGISTER_RAW_SIZE];
+      value_ptr arg = args[argnum];
+      struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+      int len = TYPE_LENGTH (arg_type);
+      enum type_code typecode = TYPE_CODE (arg_type);
+
+      /* The EABI passes structures that do not fit in a register by
+	 reference. In all other cases, pass the structure by value.  */
+      if (MIPS_EABI && len > MIPS_REGSIZE &&
+	  (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION))
+	{
+	  store_address (valbuf, MIPS_REGSIZE, VALUE_ADDRESS (arg));
+	  typecode = TYPE_CODE_PTR;
+	  len = MIPS_REGSIZE;
+	  val = valbuf;
+	}
+      else
+	val = (char *)VALUE_CONTENTS (arg);
+
+      /* 32-bit ABIs always start floating point arguments in an
+         even-numbered floating point register.   */
+      if (!FP_REGISTER_DOUBLE && typecode == TYPE_CODE_FLT
+          && (float_argreg & 1))
+	float_argreg++;
+
+      /* Floating point arguments passed in registers have to be
+         treated specially.  On 32-bit architectures, doubles
+	 are passed in register pairs; the even register gets
+	 the low word, and the odd register gets the high word.
+	 On non-EABI processors, the first two floating point arguments are
+	 also copied to general registers, because MIPS16 functions
+	 don't use float registers for arguments.  This duplication of
+	 arguments in general registers can't hurt non-MIPS16 functions
+	 because those registers are normally skipped.  */
+      if (typecode == TYPE_CODE_FLT
+	  && float_argreg <= MIPS_LAST_FP_ARG_REGNUM
+	  && MIPS_FPU_TYPE != MIPS_FPU_NONE)
+	{
+	  if (!FP_REGISTER_DOUBLE && len == 8)
+	    {
+	      int low_offset = TARGET_BYTE_ORDER == BIG_ENDIAN ? 4 : 0;
+	      unsigned long regval;
+
+	      /* Write the low word of the double to the even register(s).  */
+	      regval = extract_unsigned_integer (val+low_offset, 4);
+	      write_register (float_argreg++, regval);
+	      if (!MIPS_EABI)
+		write_register (argreg+1, regval);
+
+	      /* Write the high word of the double to the odd register(s).  */
+	      regval = extract_unsigned_integer (val+4-low_offset, 4);
+	      write_register (float_argreg++, regval);
+	      if (!MIPS_EABI)
+	        {
+		  write_register (argreg, regval);
+		  argreg += 2;
+		}
+
+	    }
+	  else
+	    {
+	      /* This is a floating point value that fits entirely
+	         in a single register.  */
+	      CORE_ADDR regval = extract_address (val, len);
+	      write_register (float_argreg++, regval);
+	      if (!MIPS_EABI)
+	        {
+		  write_register (argreg, regval);
+		  argreg += FP_REGISTER_DOUBLE ? 1 : 2;
+		}
+	    }
+	}
+      else
+	{
+	  /* Copy the argument to general registers or the stack in
+	     register-sized pieces.  Large arguments are split between
+	     registers and stack.  */
+	  /* Note: structs whose size is not a multiple of MIPS_REGSIZE
+	     are treated specially: Irix cc passes them in registers
+	     where gcc sometimes puts them on the stack.  For maximum
+	     compatibility, we will put them in both places.  */
+
+	  int odd_sized_struct = ((len > MIPS_REGSIZE) && 
+				  (len % MIPS_REGSIZE != 0));
+	  while (len > 0)
+	    {
+	      int partial_len = len < MIPS_REGSIZE ? len : MIPS_REGSIZE;
+
+	      if (argreg > MIPS_LAST_ARG_REGNUM || odd_sized_struct)
+		{
+		  /* Write this portion of the argument to the stack.  */
+		  /* Should shorter than int integer values be
+		     promoted to int before being stored? */
+
+		  int longword_offset = 0;
+		  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+		    if (STACK_ARGSIZE == 8 &&
+			(typecode == TYPE_CODE_INT ||
+			 typecode == TYPE_CODE_PTR ||
+			 typecode == TYPE_CODE_FLT) && len <= 4)
+		      longword_offset = STACK_ARGSIZE - len;
+		    else if ((typecode == TYPE_CODE_STRUCT ||
+			      typecode == TYPE_CODE_UNION) &&
+			     TYPE_LENGTH (arg_type) < STACK_ARGSIZE)
+		      longword_offset = STACK_ARGSIZE - len;
+
+		  write_memory (sp + stack_offset + longword_offset, 
+				val, partial_len);
+		}
+
+	      /* Note!!! This is NOT an else clause.
+		 Odd sized structs may go thru BOTH paths.  */
+	      if (argreg <= MIPS_LAST_ARG_REGNUM)
+		{
+		  CORE_ADDR regval = extract_address (val, partial_len);
+
+		  /* A non-floating-point argument being passed in a 
+		     general register.  If a struct or union, and if
+		     the remaining length is smaller than the register
+		     size, we have to adjust the register value on
+		     big endian targets.
+
+		     It does not seem to be necessary to do the
+		     same for integral types.
+
+		     Also don't do this adjustment on EABI and O64
+		     binaries. */
+
+		  if (!MIPS_EABI
+		      && (MIPS_REGSIZE < 8)
+		      && TARGET_BYTE_ORDER == BIG_ENDIAN
+		      && (partial_len < MIPS_REGSIZE)
+		      && (typecode == TYPE_CODE_STRUCT ||
+			  typecode == TYPE_CODE_UNION))
+		    regval <<= ((MIPS_REGSIZE - partial_len) * 
+				TARGET_CHAR_BIT);
+
+		  write_register (argreg, regval);
+		  argreg++;
+    
+		  /* If this is the old ABI, prevent subsequent floating
+		     point arguments from being passed in floating point
+		     registers.  */
+		  if (!MIPS_EABI)
+		    float_argreg = MIPS_LAST_FP_ARG_REGNUM + 1;
+		}
+    
+	      len -= partial_len;
+	      val += partial_len;
+
+	      /* The offset onto the stack at which we will start
+		 copying parameters (after the registers are used up) 
+		 begins at (4 * MIPS_REGSIZE) in the old ABI.  This 
+		 leaves room for the "home" area for register parameters.
+
+		 In the new EABI (and the NABI32), the 8 register parameters 
+		 do not have "home" stack space reserved for them, so the
+		 stack offset does not get incremented until after
+		 we have used up the 8 parameter registers.  */
+
+	      if (!(MIPS_EABI || MIPS_NABI32) ||
+		  argnum >= 8)
+		stack_offset += ROUND_UP (partial_len, STACK_ARGSIZE);
+	    }
+	}
+    }
+
+  /* Set the return address register to point to the entry
+     point of the program, where a breakpoint lies in wait.  */
+  write_register (RA_REGNUM, CALL_DUMMY_ADDRESS());
+
+  /* Return adjusted stack pointer.  */
+  return sp;
+}
+
+static void
+mips_push_register(CORE_ADDR *sp, int regno)
+{
+  char buffer[MAX_REGISTER_RAW_SIZE];
+  int regsize = REGISTER_RAW_SIZE (regno);
+
+  *sp -= regsize;
+  read_register_gen (regno, buffer);
+  write_memory (*sp, buffer, regsize);
+}
+
+/* MASK(i,j) == (1<<i) + (1<<(i+1)) + ... + (1<<j)). Assume i<=j<(MIPS_NUMREGS-1). */
+#define MASK(i,j) (((1 << ((j)+1))-1) ^ ((1 << (i))-1))
+
+void
+mips_push_dummy_frame()
+{
+  int ireg;
+  struct linked_proc_info *link = (struct linked_proc_info*)
+      xmalloc(sizeof(struct linked_proc_info));
+  mips_extra_func_info_t proc_desc = &link->info;
+  CORE_ADDR sp = ADDR_BITS_REMOVE (read_register (SP_REGNUM));
+  CORE_ADDR old_sp = sp;
+  link->next = linked_proc_desc_table;
+  linked_proc_desc_table = link;
+
+/* FIXME!   are these correct ? */
+#define PUSH_FP_REGNUM 16 /* must be a register preserved across calls */
+#define GEN_REG_SAVE_MASK MASK(1,16)|MASK(24,28)|(1<<(MIPS_NUMREGS-1))
+#define FLOAT_REG_SAVE_MASK MASK(0,19)
+#define FLOAT_SINGLE_REG_SAVE_MASK \
+  ((1<<18)|(1<<16)|(1<<14)|(1<<12)|(1<<10)|(1<<8)|(1<<6)|(1<<4)|(1<<2)|(1<<0))
+  /*
+   * The registers we must save are all those not preserved across
+   * procedure calls. Dest_Reg (see tm-mips.h) must also be saved.
+   * In addition, we must save the PC, PUSH_FP_REGNUM, MMLO/-HI
+   * and FP Control/Status registers.
+   * 
+   *
+   * Dummy frame layout:
+   *  (high memory)
+   * 	Saved PC
+   *	Saved MMHI, MMLO, FPC_CSR
+   *	Saved R31
+   *	Saved R28
+   *	...
+   *	Saved R1
+   *    Saved D18 (i.e. F19, F18)
+   *    ...
+   *    Saved D0 (i.e. F1, F0)
+   *	Argument build area and stack arguments written via mips_push_arguments
+   *  (low memory)
+   */
+
+  /* Save special registers (PC, MMHI, MMLO, FPC_CSR) */
+  PROC_FRAME_REG(proc_desc) = PUSH_FP_REGNUM;
+  PROC_FRAME_OFFSET(proc_desc) = 0;
+  PROC_FRAME_ADJUST(proc_desc) = 0;
+  mips_push_register (&sp, PC_REGNUM);
+  mips_push_register (&sp, HI_REGNUM);
+  mips_push_register (&sp, LO_REGNUM);
+  mips_push_register (&sp, MIPS_FPU_TYPE == MIPS_FPU_NONE ? 0 : FCRCS_REGNUM);
+
+  /* Save general CPU registers */
+  PROC_REG_MASK(proc_desc) = GEN_REG_SAVE_MASK;
+  /* PROC_REG_OFFSET is the offset of the first saved register from FP.  */
+  PROC_REG_OFFSET(proc_desc) = sp - old_sp - MIPS_REGSIZE;
+  for (ireg = 32; --ireg >= 0; )
+    if (PROC_REG_MASK(proc_desc) & (1 << ireg))
+      mips_push_register (&sp, ireg);
+
+  /* Save floating point registers starting with high order word */
+  PROC_FREG_MASK(proc_desc) = 
+    MIPS_FPU_TYPE == MIPS_FPU_DOUBLE ? FLOAT_REG_SAVE_MASK
+    : MIPS_FPU_TYPE == MIPS_FPU_SINGLE ? FLOAT_SINGLE_REG_SAVE_MASK : 0;
+  /* PROC_FREG_OFFSET is the offset of the first saved *double* register
+     from FP.  */
+  PROC_FREG_OFFSET(proc_desc) = sp - old_sp - 8;
+  for (ireg = 32; --ireg >= 0; )
+    if (PROC_FREG_MASK(proc_desc) & (1 << ireg))
+      mips_push_register (&sp, ireg + FP0_REGNUM);
+
+  /* Update the frame pointer for the call dummy and the stack pointer.
+     Set the procedure's starting and ending addresses to point to the
+     call dummy address at the entry point.  */
+  write_register (PUSH_FP_REGNUM, old_sp);
+  write_register (SP_REGNUM, sp);
+  PROC_LOW_ADDR(proc_desc) = CALL_DUMMY_ADDRESS();
+  PROC_HIGH_ADDR(proc_desc) =  CALL_DUMMY_ADDRESS() + 4;
+  SET_PROC_DESC_IS_DUMMY(proc_desc);
+  PROC_PC_REG(proc_desc) = RA_REGNUM;
+}
+
+void
+mips_pop_frame()
+{
+  register int regnum;
+  struct frame_info *frame = get_current_frame ();
+  CORE_ADDR new_sp = FRAME_FP (frame);
+
+  mips_extra_func_info_t proc_desc = frame->proc_desc;
+
+  write_register (PC_REGNUM, FRAME_SAVED_PC(frame));
+  if (frame->saved_regs == NULL)
+    mips_find_saved_regs (frame);
+  for (regnum = 0; regnum < NUM_REGS; regnum++)
+    {
+      if (regnum != SP_REGNUM && regnum != PC_REGNUM
+	  && frame->saved_regs[regnum])
+	write_register (regnum,
+			read_memory_integer (frame->saved_regs[regnum],
+					     MIPS_REGSIZE)); 
+    }
+  write_register (SP_REGNUM, new_sp);
+  flush_cached_frames ();
+
+  if (proc_desc && PROC_DESC_IS_DUMMY(proc_desc))
+    {
+      struct linked_proc_info *pi_ptr, *prev_ptr;
+
+      for (pi_ptr = linked_proc_desc_table, prev_ptr = NULL;
+	   pi_ptr != NULL;
+	   prev_ptr = pi_ptr, pi_ptr = pi_ptr->next)
+	{
+	  if (&pi_ptr->info == proc_desc)
+	    break;
+	}
+
+      if (pi_ptr == NULL)
+	error ("Can't locate dummy extra frame info\n");
+
+      if (prev_ptr != NULL)
+	prev_ptr->next = pi_ptr->next;
+      else
+	linked_proc_desc_table = pi_ptr->next;
+
+      free (pi_ptr);
+
+      write_register (HI_REGNUM,
+	        read_memory_integer (new_sp - 2*MIPS_REGSIZE, MIPS_REGSIZE));
+      write_register (LO_REGNUM,
+	        read_memory_integer (new_sp - 3*MIPS_REGSIZE, MIPS_REGSIZE));
+      if (MIPS_FPU_TYPE != MIPS_FPU_NONE)
+	write_register (FCRCS_REGNUM,
+	        read_memory_integer (new_sp - 4*MIPS_REGSIZE, MIPS_REGSIZE));
+    }
+}
+
+static void
+mips_print_register (regnum, all)
+     int regnum, all;
+{
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+
+  /* Get the data in raw format.  */
+  if (read_relative_register_raw_bytes (regnum, raw_buffer))
+    {
+      printf_filtered ("%s: [Invalid]", REGISTER_NAME (regnum));
+      return;
+    }
+
+  /* If an even floating point register, also print as double. */
+  if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT
+      && !((regnum-FP0_REGNUM) & 1))
+    if (REGISTER_RAW_SIZE(regnum) == 4)	/* this would be silly on MIPS64 or N32 (Irix 6) */
+      {
+	char dbuffer[2 * MAX_REGISTER_RAW_SIZE]; 
+
+	read_relative_register_raw_bytes (regnum, dbuffer);
+	read_relative_register_raw_bytes (regnum+1, dbuffer+MIPS_REGSIZE);
+	REGISTER_CONVERT_TO_TYPE (regnum, builtin_type_double, dbuffer);
+
+	printf_filtered ("(d%d: ", regnum-FP0_REGNUM);
+	val_print (builtin_type_double, dbuffer, 0, 0,
+		   gdb_stdout, 0, 1, 0, Val_pretty_default);
+	printf_filtered ("); ");
+      }
+  fputs_filtered (REGISTER_NAME (regnum), gdb_stdout);
+
+  /* The problem with printing numeric register names (r26, etc.) is that
+     the user can't use them on input.  Probably the best solution is to
+     fix it so that either the numeric or the funky (a2, etc.) names
+     are accepted on input.  */
+  if (regnum < MIPS_NUMREGS)
+    printf_filtered ("(r%d): ", regnum);
+  else
+    printf_filtered (": ");
+
+  /* If virtual format is floating, print it that way.  */
+  if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+    if (FP_REGISTER_DOUBLE)
+      { /* show 8-byte floats as float AND double: */
+	int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+
+	printf_filtered (" (float) ");
+	val_print (builtin_type_float, raw_buffer + offset, 0, 0,
+		   gdb_stdout, 0, 1, 0, Val_pretty_default);
+	printf_filtered (", (double) ");
+	val_print (builtin_type_double, raw_buffer, 0, 0,
+		   gdb_stdout, 0, 1, 0, Val_pretty_default);
+      }
+    else
+      val_print (REGISTER_VIRTUAL_TYPE (regnum), raw_buffer, 0, 0,
+		 gdb_stdout, 0, 1, 0, Val_pretty_default);
+  /* Else print as integer in hex.  */
+  else
+    print_scalar_formatted (raw_buffer, REGISTER_VIRTUAL_TYPE (regnum),
+			    'x', 0, gdb_stdout);
+}
+
+/* Replacement for generic do_registers_info.  
+   Print regs in pretty columns.  */
+
+static int
+do_fp_register_row (regnum)
+     int regnum;
+{ /* do values for FP (float) regs */
+  char *raw_buffer[2];
+  char *dbl_buffer;
+  /* use HI and LO to control the order of combining two flt regs */
+  int HI = (TARGET_BYTE_ORDER == BIG_ENDIAN);
+  int LO = (TARGET_BYTE_ORDER != BIG_ENDIAN);
+  double doub, flt1, flt2;	/* doubles extracted from raw hex data */
+  int inv1, inv2, inv3;
+   
+  raw_buffer[0] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+  raw_buffer[1] = (char *) alloca (REGISTER_RAW_SIZE (FP0_REGNUM));
+  dbl_buffer = (char *) alloca (2 * REGISTER_RAW_SIZE (FP0_REGNUM));
+
+  /* Get the data in raw format.  */
+  if (read_relative_register_raw_bytes (regnum, raw_buffer[HI]))
+    error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+  if (REGISTER_RAW_SIZE(regnum) == 4)
+    {
+      /* 4-byte registers: we can fit two registers per row. */
+      /* Also print every pair of 4-byte regs as an 8-byte double. */
+      if (read_relative_register_raw_bytes (regnum + 1, raw_buffer[LO]))
+	error ("can't read register %d (%s)", 
+	       regnum + 1, REGISTER_NAME (regnum + 1));
+
+      /* copy the two floats into one double, and unpack both */
+      memcpy (dbl_buffer, raw_buffer, sizeof(dbl_buffer));
+      flt1 = unpack_double (builtin_type_float,  raw_buffer[HI], &inv1);
+      flt2 = unpack_double (builtin_type_float,  raw_buffer[LO], &inv2);
+      doub = unpack_double (builtin_type_double, dbl_buffer,     &inv3);
+
+      printf_filtered (inv1 ? " %-5s: <invalid float>" : 
+		       " %-5s%-17.9g", REGISTER_NAME (regnum),     flt1);
+      printf_filtered (inv2 ? " %-5s: <invalid float>" : 
+		       " %-5s%-17.9g", REGISTER_NAME (regnum + 1), flt2);
+      printf_filtered (inv3 ? " dbl: <invalid double>\n" : 
+		       " dbl: %-24.17g\n", doub);
+      /* may want to do hex display here (future enhancement) */
+      regnum +=2;
+    }
+  else
+    { /* eight byte registers: print each one as float AND as double. */
+      int offset = 4 * (TARGET_BYTE_ORDER == BIG_ENDIAN);
+
+      memcpy (dbl_buffer, raw_buffer[HI], sizeof(dbl_buffer));
+      flt1 = unpack_double (builtin_type_float, 
+			    &raw_buffer[HI][offset], &inv1);
+      doub = unpack_double (builtin_type_double, dbl_buffer,    &inv3);
+
+      printf_filtered (inv1 ? " %-5s: <invalid float>" : 
+		       " %-5s flt: %-17.9g", REGISTER_NAME (regnum), flt1);
+      printf_filtered (inv3 ? " dbl: <invalid double>\n" : 
+		       " dbl: %-24.17g\n", doub);
+      /* may want to do hex display here (future enhancement) */
+      regnum++;
+    }
+  return regnum;
+}
+
+/* Print a row's worth of GP (int) registers, with name labels above */
+
+static int
+do_gp_register_row (regnum)
+     int regnum;
+{
+  /* do values for GP (int) regs */
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  int ncols = (MIPS_REGSIZE == 8 ? 4 : 8);	/* display cols per row */
+  int col, byte;
+  int start_regnum = regnum;
+  int numregs = NUM_REGS;
+
+
+  /* For GP registers, we print a separate row of names above the vals */
+  printf_filtered ("     ");
+  for (col = 0; col < ncols && regnum < numregs; regnum++)
+    {
+      if (*REGISTER_NAME (regnum) == '\0')
+	continue;	/* unused register */
+      if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+	break;	/* end the row: reached FP register */
+      printf_filtered (MIPS_REGSIZE == 8 ? "%17s" : "%9s", 
+		       REGISTER_NAME (regnum));
+      col++;
+    }
+  printf_filtered (start_regnum < MIPS_NUMREGS ? "\n R%-4d" : "\n      ", 
+		   start_regnum);	/* print the R0 to R31 names */
+
+  regnum = start_regnum;	/* go back to start of row */
+  /* now print the values in hex, 4 or 8 to the row */
+  for (col = 0; col < ncols && regnum < numregs; regnum++)
+    {
+      if (*REGISTER_NAME (regnum) == '\0')
+	continue;	/* unused register */
+      if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+	break;	/* end row: reached FP register */
+      /* OK: get the data in raw format.  */
+      if (read_relative_register_raw_bytes (regnum, raw_buffer))
+	error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum));
+      /* pad small registers */
+      for (byte = 0; byte < (MIPS_REGSIZE - REGISTER_RAW_SIZE (regnum)); byte++)
+	printf_filtered ("  ");
+      /* Now print the register value in hex, endian order. */
+      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	for (byte = 0; byte < REGISTER_RAW_SIZE (regnum); byte++)
+	  printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+      else
+	for (byte = REGISTER_RAW_SIZE (regnum) - 1; byte >= 0; byte--)
+	  printf_filtered ("%02x", (unsigned char) raw_buffer[byte]);
+      printf_filtered (" ");
+      col++;
+    }
+  if (col > 0)	/* ie. if we actually printed anything... */
+    printf_filtered ("\n");
+
+  return regnum;
+}
+
+/* MIPS_DO_REGISTERS_INFO(): called by "info register" command */
+
+void
+mips_do_registers_info (regnum, fpregs)
+     int regnum;
+     int fpregs;
+{
+  if (regnum != -1)	/* do one specified register */
+    {
+      if (*(REGISTER_NAME (regnum)) == '\0')
+	error ("Not a valid register for the current processor type");
+
+      mips_print_register (regnum, 0);
+      printf_filtered ("\n");
+    }
+  else			/* do all (or most) registers */
+    {
+      regnum = 0;
+      while (regnum < NUM_REGS)
+	{
+	  if (TYPE_CODE(REGISTER_VIRTUAL_TYPE (regnum)) == TYPE_CODE_FLT)
+	    if (fpregs)	/* true for "INFO ALL-REGISTERS" command */
+	      regnum = do_fp_register_row (regnum);	/* FP regs */
+	    else
+	      regnum += MIPS_NUMREGS;	/* skip floating point regs */
+	  else
+	    regnum = do_gp_register_row (regnum);	/* GP (int) regs */
+	}
+    }
+}
+
+/* Return number of args passed to a frame. described by FIP.
+   Can return -1, meaning no way to tell.  */
+
+int
+mips_frame_num_args (frame)
+	struct frame_info *frame;
+{
+#if 0 /* FIXME Use or lose this! */
+  struct chain_info_t *p;
+
+  p = mips_find_cached_frame (FRAME_FP (frame));
+  if (p->valid)
+    return p->the_info.numargs;
+#endif
+  return -1;
+}
+
+/* Is this a branch with a delay slot?  */
+
+static int is_delayed PARAMS ((unsigned long));
+
+static int
+is_delayed (insn)
+     unsigned long insn;
+{
+  int i;
+  for (i = 0; i < NUMOPCODES; ++i)
+    if (mips_opcodes[i].pinfo != INSN_MACRO
+	&& (insn & mips_opcodes[i].mask) == mips_opcodes[i].match)
+      break;
+  return (i < NUMOPCODES
+	  && (mips_opcodes[i].pinfo & (INSN_UNCOND_BRANCH_DELAY
+				       | INSN_COND_BRANCH_DELAY
+				       | INSN_COND_BRANCH_LIKELY)));
+}
+
+int
+mips_step_skips_delay (pc)
+     CORE_ADDR pc;
+{
+  char buf[MIPS_INSTLEN];
+
+  /* There is no branch delay slot on MIPS16.  */
+  if (pc_is_mips16 (pc))
+    return 0;
+
+  if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0)
+    /* If error reading memory, guess that it is not a delayed branch.  */
+    return 0;
+  return is_delayed ((unsigned long)extract_unsigned_integer (buf, MIPS_INSTLEN));
+}
+
+
+/* Skip the PC past function prologue instructions (32-bit version).
+   This is a helper function for mips_skip_prologue.  */
+
+static CORE_ADDR
+mips32_skip_prologue (pc, lenient)
+     CORE_ADDR pc;	/* starting PC to search from */
+     int lenient;
+{
+    t_inst inst;
+    CORE_ADDR end_pc;
+    int seen_sp_adjust = 0;
+    int load_immediate_bytes = 0;
+
+    /* Skip the typical prologue instructions. These are the stack adjustment
+       instruction and the instructions that save registers on the stack
+       or in the gcc frame.  */
+    for (end_pc = pc + 100; pc < end_pc; pc += MIPS_INSTLEN)
+      {
+	unsigned long high_word;
+
+	inst = mips_fetch_instruction (pc);
+	high_word = (inst >> 16) & 0xffff;
+
+#if 0
+	if (lenient && is_delayed (inst))
+	  continue;
+#endif
+
+	if (high_word == 0x27bd			/* addiu $sp,$sp,offset */
+	    || high_word == 0x67bd)		/* daddiu $sp,$sp,offset */
+	    seen_sp_adjust = 1;
+	else if (inst == 0x03a1e823 || 	        /* subu $sp,$sp,$at */
+		 inst == 0x03a8e823)   	        /* subu $sp,$sp,$t0 */
+	    seen_sp_adjust = 1;
+	else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */
+		  || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */
+		 && (inst & 0x001F0000))	/* reg != $zero */
+	    continue;
+						
+	else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */
+	    continue;
+	else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000))
+						/* sx reg,n($s8) */
+	    continue;				/* reg != $zero */
+ 
+        /* move $s8,$sp.  With different versions of gas this will be either
+           `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'.
+	    Accept any one of these.  */
+        else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d)
+	    continue;
+
+	else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */
+	    continue;
+	else if (high_word == 0x3c1c) 		/* lui $gp,n */
+	    continue;
+	else if (high_word == 0x279c) 		/* addiu $gp,$gp,n */
+	    continue;
+	else if (inst == 0x0399e021		/* addu $gp,$gp,$t9 */
+		 || inst == 0x033ce021)		/* addu $gp,$t9,$gp */
+	  continue;
+	/* The following instructions load $at or $t0 with an immediate
+	   value in preparation for a stack adjustment via
+	   subu $sp,$sp,[$at,$t0]. These instructions could also initialize
+	   a local variable, so we accept them only before a stack adjustment
+	   instruction was seen.  */
+	else if (!seen_sp_adjust)
+	  {
+	    if (high_word == 0x3c01 ||	 	/* lui $at,n */
+		high_word == 0x3c08)	  	/* lui $t0,n */
+	      {
+		load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+		continue;
+	      }
+	    else if (high_word == 0x3421 || 	/* ori $at,$at,n */
+		     high_word == 0x3508 || 	/* ori $t0,$t0,n */
+		     high_word == 0x3401 || 	/* ori $at,$zero,n */
+		     high_word == 0x3408)   	/* ori $t0,$zero,n */
+	      {
+		load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */
+		continue;
+	      }
+	    else
+	      break;
+	  }
+	else
+	  break;
+    }
+
+    /* In a frameless function, we might have incorrectly
+       skipped some load immediate instructions. Undo the skipping
+       if the load immediate was not followed by a stack adjustment.  */
+    if (load_immediate_bytes && !seen_sp_adjust)
+      pc -= load_immediate_bytes;
+    return pc;
+}
+
+/* Skip the PC past function prologue instructions (16-bit version).
+   This is a helper function for mips_skip_prologue.  */
+
+static CORE_ADDR
+mips16_skip_prologue (pc, lenient)
+     CORE_ADDR pc;	/* starting PC to search from */
+     int lenient;
+{
+    CORE_ADDR end_pc;
+    int extend_bytes = 0;
+    int prev_extend_bytes;
+
+    /* Table of instructions likely to be found in a function prologue.  */
+    static struct
+    {
+      unsigned short inst;
+      unsigned short mask;
+    } table[] =
+    {
+      { 0x6300, 0xff00 },	/* addiu $sp,offset */
+      { 0xfb00, 0xff00 },	/* daddiu $sp,offset */
+      { 0xd000, 0xf800 },	/* sw reg,n($sp) */
+      { 0xf900, 0xff00 },	/* sd reg,n($sp) */
+      { 0x6200, 0xff00 },	/* sw $ra,n($sp) */
+      { 0xfa00, 0xff00 },	/* sd $ra,n($sp) */
+      { 0x673d, 0xffff },	/* move $s1,sp */
+      { 0xd980, 0xff80 },	/* sw $a0-$a3,n($s1) */
+      { 0x6704, 0xff1c },	/* move reg,$a0-$a3 */
+      { 0xe809, 0xf81f },	/* entry pseudo-op */
+      { 0x0100, 0xff00 },	/* addiu $s1,$sp,n */
+      { 0, 0 }			/* end of table marker */
+    };
+
+    /* Skip the typical prologue instructions. These are the stack adjustment
+       instruction and the instructions that save registers on the stack
+       or in the gcc frame.  */
+    for (end_pc = pc + 100; pc < end_pc; pc += MIPS16_INSTLEN)
+      {
+	unsigned short inst;
+	int i;
+
+	inst = mips_fetch_instruction (pc);
+
+	/* Normally we ignore an extend instruction.  However, if it is
+	   not followed by a valid prologue instruction, we must adjust
+	   the pc back over the extend so that it won't be considered
+	   part of the prologue.  */
+	if ((inst & 0xf800) == 0xf000)		/* extend */
+	  {
+	    extend_bytes = MIPS16_INSTLEN;
+	    continue;
+	  }
+	prev_extend_bytes = extend_bytes;
+	extend_bytes = 0;
+
+	/* Check for other valid prologue instructions besides extend.  */
+	for (i = 0; table[i].mask != 0; i++)
+	  if ((inst & table[i].mask) == table[i].inst)	/* found, get out */
+	    break;
+	if (table[i].mask != 0)			/* it was in table? */
+	  continue;				/* ignore it */
+	else					/* non-prologue */
+	  {
+	    /* Return the current pc, adjusted backwards by 2 if
+	       the previous instruction was an extend.  */
+	    return pc - prev_extend_bytes;
+	  }
+    }
+  return pc;
+}
+
+/* To skip prologues, I use this predicate.  Returns either PC itself
+   if the code at PC does not look like a function prologue; otherwise
+   returns an address that (if we're lucky) follows the prologue.  If
+   LENIENT, then we must skip everything which is involved in setting
+   up the frame (it's OK to skip more, just so long as we don't skip
+   anything which might clobber the registers which are being saved.
+   We must skip more in the case where part of the prologue is in the
+   delay slot of a non-prologue instruction).  */
+
+CORE_ADDR
+mips_skip_prologue (pc, lenient)
+     CORE_ADDR pc;
+     int lenient;
+{
+  /* See if we can determine the end of the prologue via the symbol table.
+     If so, then return either PC, or the PC after the prologue, whichever
+     is greater.  */
+
+  CORE_ADDR post_prologue_pc = after_prologue (pc, NULL);
+
+  if (post_prologue_pc != 0)
+    return max (pc, post_prologue_pc);
+
+  /* Can't determine prologue from the symbol table, need to examine
+     instructions.  */
+
+  if (pc_is_mips16 (pc))
+    return mips16_skip_prologue (pc, lenient);
+  else
+    return mips32_skip_prologue (pc, lenient);
+}
+
+#if 0
+/* The lenient prologue stuff should be superseded by the code in
+   init_extra_frame_info which looks to see whether the stores mentioned
+   in the proc_desc have actually taken place.  */
+
+/* Is address PC in the prologue (loosely defined) for function at
+   STARTADDR?  */
+
+static int
+mips_in_lenient_prologue (startaddr, pc)
+     CORE_ADDR startaddr;
+     CORE_ADDR pc;
+{
+  CORE_ADDR end_prologue = mips_skip_prologue (startaddr, 1);
+  return pc >= startaddr && pc < end_prologue;
+}
+#endif
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   extract and copy its value into `valbuf'.  */
+void
+mips_extract_return_value (valtype, regbuf, valbuf)
+    struct type *valtype;
+    char regbuf[REGISTER_BYTES];
+    char *valbuf;
+{
+  int regnum;
+  int offset = 0;
+  int len = TYPE_LENGTH (valtype);
+  
+  regnum = 2;
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+      && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+	  || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+	      && len <= MIPS_FPU_SINGLE_REGSIZE)))
+    regnum = FP0_REGNUM;
+
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    { /* "un-left-justify" the value from the register */
+      if (len < REGISTER_RAW_SIZE (regnum))
+	offset = REGISTER_RAW_SIZE (regnum) - len;
+      if (len > REGISTER_RAW_SIZE (regnum)     &&	/* odd-size structs */
+	  len < REGISTER_RAW_SIZE (regnum) * 2 &&
+	  (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+	   TYPE_CODE (valtype) == TYPE_CODE_UNION))
+	offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+    }
+  memcpy (valbuf, regbuf + REGISTER_BYTE (regnum) + offset, len);
+  REGISTER_CONVERT_TO_TYPE (regnum, valtype, valbuf);
+}
+
+/* Given a return value in `regbuf' with a type `valtype', 
+   write it's value into the appropriate register.  */
+void
+mips_store_return_value (valtype, valbuf)
+    struct type *valtype;
+    char *valbuf;
+{
+  int regnum;
+  int offset = 0;
+  int len = TYPE_LENGTH (valtype);
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  
+  regnum = 2;
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT
+      && (MIPS_FPU_TYPE == MIPS_FPU_DOUBLE
+	  || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE
+	      && len <= MIPS_REGSIZE)))
+    regnum = FP0_REGNUM;
+
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    { /* "left-justify" the value in the register */
+      if (len < REGISTER_RAW_SIZE (regnum))
+	offset = REGISTER_RAW_SIZE (regnum) - len;
+      if (len > REGISTER_RAW_SIZE (regnum)     &&	/* odd-size structs */
+	  len < REGISTER_RAW_SIZE (regnum) * 2 &&
+	  (TYPE_CODE (valtype) == TYPE_CODE_STRUCT ||
+	   TYPE_CODE (valtype) == TYPE_CODE_UNION))
+	offset = 2 * REGISTER_RAW_SIZE (regnum) - len;
+    }
+  memcpy(raw_buffer + offset, valbuf, len);
+  REGISTER_CONVERT_FROM_TYPE(regnum, valtype, raw_buffer);
+  write_register_bytes(REGISTER_BYTE (regnum), raw_buffer, 
+		       len > REGISTER_RAW_SIZE (regnum) ? 
+		       len : REGISTER_RAW_SIZE (regnum));
+}
+
+/* Exported procedure: Is PC in the signal trampoline code */
+
+int
+in_sigtramp (pc, ignore)
+     CORE_ADDR pc;
+     char *ignore;		/* function name */
+{
+  if (sigtramp_address == 0)
+    fixup_sigtramp ();
+  return (pc >= sigtramp_address && pc < sigtramp_end);
+}
+
+/* Commands to show/set the MIPS FPU type.  */
+
+static void show_mipsfpu_command PARAMS ((char *, int));
+static void
+show_mipsfpu_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *msg;
+  char *fpu;
+  switch (MIPS_FPU_TYPE)
+    {
+    case MIPS_FPU_SINGLE:
+      fpu = "single-precision";
+      break;
+    case MIPS_FPU_DOUBLE:
+      fpu = "double-precision";
+      break;
+    case MIPS_FPU_NONE:
+      fpu = "absent (none)";
+      break;
+    }
+  if (mips_fpu_type_auto)
+    printf_unfiltered ("The MIPS floating-point coprocessor is set automatically (currently %s)\n",
+		       fpu);
+  else
+    printf_unfiltered ("The MIPS floating-point coprocessor is assumed to be %s\n",
+		       fpu);
+}
+
+
+static void set_mipsfpu_command PARAMS ((char *, int));
+static void
+set_mipsfpu_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set mipsfpu\" must be followed by \"double\", \"single\",\"none\" or \"auto\".\n");
+  show_mipsfpu_command (args, from_tty);
+}
+
+static void set_mipsfpu_single_command PARAMS ((char *, int));
+static void
+set_mipsfpu_single_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  mips_fpu_type = MIPS_FPU_SINGLE;
+  mips_fpu_type_auto = 0;
+}
+
+static void set_mipsfpu_double_command PARAMS ((char *, int));
+static void
+set_mipsfpu_double_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  mips_fpu_type = MIPS_FPU_DOUBLE;
+  mips_fpu_type_auto = 0;
+}
+
+static void set_mipsfpu_none_command PARAMS ((char *, int));
+static void
+set_mipsfpu_none_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  mips_fpu_type = MIPS_FPU_NONE;
+  mips_fpu_type_auto = 0;
+}
+
+static void set_mipsfpu_auto_command PARAMS ((char *, int));
+static void
+set_mipsfpu_auto_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  mips_fpu_type_auto = 1;
+}
+
+/* Command to set the processor type.  */
+
+void
+mips_set_processor_type_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int i;
+
+  if (tmp_mips_processor_type == NULL || *tmp_mips_processor_type == '\0')
+    {
+      printf_unfiltered ("The known MIPS processor types are as follows:\n\n");
+      for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
+	printf_unfiltered ("%s\n", mips_processor_type_table[i].name);
+
+      /* Restore the value.  */
+      tmp_mips_processor_type = strsave (mips_processor_type);
+
+      return;
+    }
+  
+  if (!mips_set_processor_type (tmp_mips_processor_type))
+    {
+      error ("Unknown processor type `%s'.", tmp_mips_processor_type);
+      /* Restore its value.  */
+      tmp_mips_processor_type = strsave (mips_processor_type);
+    }
+}
+
+static void
+mips_show_processor_type_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+}
+
+/* Modify the actual processor type. */
+
+int
+mips_set_processor_type (str)
+     char *str;
+{
+  int i, j;
+
+  if (str == NULL)
+    return 0;
+
+  for (i = 0; mips_processor_type_table[i].name != NULL; ++i)
+    {
+      if (strcasecmp (str, mips_processor_type_table[i].name) == 0)
+	{
+	  mips_processor_type = str;
+
+	  for (j = 0; j < NUM_REGS; ++j)
+	    /* FIXME - MIPS should be defining REGISTER_NAME() instead */
+	    gdb_register_names[j] = mips_processor_type_table[i].regnames[j];
+
+	  return 1;
+
+	  /* FIXME tweak fpu flag too */
+	}
+    }
+
+  return 0;
+}
+
+/* Attempt to identify the particular processor model by reading the
+   processor id.  */
+
+char *
+mips_read_processor_type ()
+{
+  CORE_ADDR prid;
+
+  prid = read_register (PRID_REGNUM);
+
+  if ((prid & ~0xf) == 0x700)
+    return savestring ("r3041", strlen("r3041"));
+
+  return NULL;
+}
+
+/* Just like reinit_frame_cache, but with the right arguments to be
+   callable as an sfunc.  */
+
+static void
+reinit_frame_cache_sfunc (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  reinit_frame_cache ();
+}
+
+int
+gdb_print_insn_mips (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  mips_extra_func_info_t proc_desc;
+
+  /* Search for the function containing this address.  Set the low bit
+     of the address when searching, in case we were given an even address
+     that is the start of a 16-bit function.  If we didn't do this,
+     the search would fail because the symbol table says the function
+     starts at an odd address, i.e. 1 byte past the given address.  */
+  memaddr = ADDR_BITS_REMOVE (memaddr);
+  proc_desc = non_heuristic_proc_desc (MAKE_MIPS16_ADDR (memaddr), NULL);
+
+  /* Make an attempt to determine if this is a 16-bit function.  If
+     the procedure descriptor exists and the address therein is odd,
+     it's definitely a 16-bit function.  Otherwise, we have to just
+     guess that if the address passed in is odd, it's 16-bits.  */
+  if (proc_desc)
+    info->mach = pc_is_mips16 (PROC_LOW_ADDR (proc_desc)) ? 16 : TM_PRINT_INSN_MACH;
+  else
+    info->mach = pc_is_mips16 (memaddr) ? 16 : TM_PRINT_INSN_MACH;
+
+  /* Round down the instruction address to the appropriate boundary.  */
+  memaddr &= (info->mach == 16 ? ~1 : ~3);
+      
+  /* Call the appropriate disassembler based on the target endian-ness.  */
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return print_insn_big_mips (memaddr, info);
+  else
+    return print_insn_little_mips (memaddr, info);
+}
+
+/* Old-style breakpoint macros.
+   The IDT board uses an unusual breakpoint value, and sometimes gets
+   confused when it sees the usual MIPS breakpoint instruction.  */
+
+#define BIG_BREAKPOINT {0, 0x5, 0, 0xd}
+#define LITTLE_BREAKPOINT {0xd, 0, 0x5, 0}
+#define PMON_BIG_BREAKPOINT {0, 0, 0, 0xd}
+#define PMON_LITTLE_BREAKPOINT {0xd, 0, 0, 0}
+#define IDT_BIG_BREAKPOINT {0, 0, 0x0a, 0xd}
+#define IDT_LITTLE_BREAKPOINT {0xd, 0x0a, 0, 0}
+#define MIPS16_BIG_BREAKPOINT {0xe8, 0xa5}
+#define MIPS16_LITTLE_BREAKPOINT {0xa5, 0xe8}
+
+/* This function implements the BREAKPOINT_FROM_PC macro.  It uses the program
+   counter value to determine whether a 16- or 32-bit breakpoint should be
+   used.  It returns a pointer to a string of bytes that encode a breakpoint
+   instruction, stores the length of the string to *lenptr, and adjusts pc
+   (if necessary) to point to the actual memory location where the
+   breakpoint should be inserted.  */
+
+unsigned char *mips_breakpoint_from_pc (pcptr, lenptr)
+     CORE_ADDR *pcptr;
+     int *lenptr;
+{
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      if (pc_is_mips16 (*pcptr))
+	{
+	  static char mips16_big_breakpoint[] = MIPS16_BIG_BREAKPOINT;
+	  *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+	  *lenptr = sizeof(mips16_big_breakpoint);
+	  return mips16_big_breakpoint;
+	}
+      else
+	{
+	  static char big_breakpoint[] = BIG_BREAKPOINT;
+	  static char pmon_big_breakpoint[] = PMON_BIG_BREAKPOINT;
+	  static char idt_big_breakpoint[] = IDT_BIG_BREAKPOINT;
+
+	  *lenptr = sizeof(big_breakpoint);
+
+	  if (strcmp (target_shortname, "mips") == 0)
+	    return idt_big_breakpoint;
+	  else if (strcmp (target_shortname, "ddb") == 0
+		   || strcmp (target_shortname, "pmon") == 0
+		   || strcmp (target_shortname, "lsi") == 0)
+	    return pmon_big_breakpoint;
+	  else
+	    return big_breakpoint;
+	}
+    }
+  else
+    {
+      if (pc_is_mips16 (*pcptr))
+	{
+	  static char mips16_little_breakpoint[] = MIPS16_LITTLE_BREAKPOINT;
+	  *pcptr = UNMAKE_MIPS16_ADDR (*pcptr);
+	  *lenptr = sizeof(mips16_little_breakpoint);
+	  return mips16_little_breakpoint;
+	}
+      else
+	{
+	  static char little_breakpoint[] = LITTLE_BREAKPOINT;
+	  static char pmon_little_breakpoint[] = PMON_LITTLE_BREAKPOINT;
+	  static char idt_little_breakpoint[] = IDT_LITTLE_BREAKPOINT;
+
+	  *lenptr = sizeof(little_breakpoint);
+
+	  if (strcmp (target_shortname, "mips") == 0)
+	    return idt_little_breakpoint;
+	  else if (strcmp (target_shortname, "ddb") == 0
+		   || strcmp (target_shortname, "pmon") == 0
+		   || strcmp (target_shortname, "lsi") == 0)
+	    return pmon_little_breakpoint;
+	  else
+	    return little_breakpoint;
+	}
+    }
+}
+
+/* If PC is in a mips16 call or return stub, return the address of the target
+   PC, which is either the callee or the caller.  There are several
+   cases which must be handled:
+
+   * If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+     target PC is in $31 ($ra).
+   * If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+     and the target PC is in $2.
+   * If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+     before the jal instruction, this is effectively a call stub
+     and the the target PC is in $2.  Otherwise this is effectively
+     a return stub and the target PC is in $18.
+
+   See the source code for the stubs in gcc/config/mips/mips16.S for
+   gory details.
+
+   This function implements the SKIP_TRAMPOLINE_CODE macro.
+*/
+
+CORE_ADDR
+mips_skip_stub (pc)
+     CORE_ADDR pc;
+{
+  char *name;
+  CORE_ADDR start_addr;
+
+  /* Find the starting address and name of the function containing the PC.  */
+  if (find_pc_partial_function (pc, &name, &start_addr, NULL) == 0)
+    return 0;
+
+  /* If the PC is in __mips16_ret_{d,s}f, this is a return stub and the
+     target PC is in $31 ($ra).  */
+  if (strcmp (name, "__mips16_ret_sf") == 0
+      || strcmp (name, "__mips16_ret_df") == 0)
+    return read_register (RA_REGNUM);
+
+  if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+    {
+      /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub
+         and the target PC is in $2.  */
+      if (name[19] >= '0' && name[19] <= '9')
+	return read_register (2);
+
+      /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+	 before the jal instruction, this is effectively a call stub
+	 and the the target PC is in $2.  Otherwise this is effectively
+	 a return stub and the target PC is in $18.  */
+      else if (name[19] == 's' || name[19] == 'd')
+	{
+	  if (pc == start_addr)
+	    {
+	      /* Check if the target of the stub is a compiler-generated
+		 stub.  Such a stub for a function bar might have a name
+		 like __fn_stub_bar, and might look like this:
+		      mfc1    $4,$f13
+		      mfc1    $5,$f12
+		      mfc1    $6,$f15
+		      mfc1    $7,$f14
+		      la      $1,bar   (becomes a lui/addiu pair)
+		      jr      $1
+		 So scan down to the lui/addi and extract the target
+		 address from those two instructions.  */
+
+	      CORE_ADDR target_pc = read_register (2);
+	      t_inst inst;
+	      int i;
+
+	      /* See if the name of the target function is  __fn_stub_*.  */
+	      if (find_pc_partial_function (target_pc, &name, NULL, NULL) == 0)
+		return target_pc;
+	      if (strncmp (name, "__fn_stub_", 10) != 0
+		  && strcmp (name, "etext") != 0
+		  && strcmp (name, "_etext") != 0)
+		return target_pc;
+
+	      /* Scan through this _fn_stub_ code for the lui/addiu pair.
+		 The limit on the search is arbitrarily set to 20
+		 instructions.  FIXME.  */
+	      for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN)
+		{
+		   inst = mips_fetch_instruction (target_pc);
+		   if ((inst & 0xffff0000) == 0x3c010000)	/* lui $at */
+		      pc = (inst << 16) & 0xffff0000;		/* high word */
+		   else if ((inst & 0xffff0000) == 0x24210000)	/* addiu $at */
+		      return pc | (inst & 0xffff);		/* low word */
+		}
+
+	      /* Couldn't find the lui/addui pair, so return stub address.  */
+	      return target_pc;
+	    }
+	  else
+	    /* This is the 'return' part of a call stub.  The return
+	       address is in $r18.  */
+	    return read_register (18);
+	}
+    }
+  return 0;	/* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline).
+   This implements the IN_SOLIB_CALL_TRAMPOLINE macro.  */
+
+int
+mips_in_call_stub (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  CORE_ADDR start_addr;
+
+  /* Find the starting address of the function containing the PC.  If the
+     caller didn't give us a name, look it up at the same time.  */
+  if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == 0)
+    return 0;
+
+  if (strncmp (name, "__mips16_call_stub_", 19) == 0)
+    {
+      /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub.  */
+      if (name[19] >= '0' && name[19] <= '9')
+	return 1;
+      /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e.
+	 before the jal instruction, this is effectively a call stub.  */
+      else if (name[19] == 's' || name[19] == 'd')
+	return pc == start_addr;
+    }
+
+  return 0;	/* not a stub */
+}
+
+
+/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline).
+   This implements the IN_SOLIB_RETURN_TRAMPOLINE macro.  */
+
+int
+mips_in_return_stub (pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  CORE_ADDR start_addr;
+
+  /* Find the starting address of the function containing the PC.  */
+  if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0)
+    return 0;
+
+  /* If the PC is in __mips16_ret_{d,s}f, this is a return stub.  */
+  if (strcmp (name, "__mips16_ret_sf") == 0
+      || strcmp (name, "__mips16_ret_df") == 0)
+    return 1;
+
+  /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start,
+      i.e. after the jal instruction, this is effectively a return stub.  */
+  if (strncmp (name, "__mips16_call_stub_", 19) == 0
+      && (name[19] == 's' || name[19] == 'd')
+      && pc != start_addr)
+    return 1;
+
+  return 0;	/* not a stub */
+}
+
+
+/* Return non-zero if the PC is in a library helper function that should
+   be ignored.  This implements the IGNORE_HELPER_CALL macro.  */
+
+int
+mips_ignore_helper (pc)
+     CORE_ADDR pc;
+{
+  char *name;
+
+  /* Find the starting address and name of the function containing the PC.  */
+  if (find_pc_partial_function (pc, &name, NULL, NULL) == 0)
+    return 0;
+
+  /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function
+     that we want to ignore.  */
+  return (strcmp (name, "__mips16_ret_sf") == 0
+	  || strcmp (name, "__mips16_ret_df") == 0);
+}
+
+
+/* Return a location where we can set a breakpoint that will be hit
+   when an inferior function call returns.  This is normally the
+   program's entry point.  Executables that don't have an entry
+   point (e.g. programs in ROM) should define a symbol __CALL_DUMMY_ADDRESS
+   whose address is the location where the breakpoint should be placed.  */
+
+CORE_ADDR
+mips_call_dummy_address ()
+{
+  struct minimal_symbol *sym;
+
+  sym = lookup_minimal_symbol ("__CALL_DUMMY_ADDRESS", NULL, NULL);
+  if (sym)
+    return SYMBOL_VALUE_ADDRESS (sym);
+  else
+    return entry_point_address ();
+}
+
+
+void
+_initialize_mips_tdep ()
+{
+  static struct cmd_list_element *mipsfpulist = NULL;
+  struct cmd_list_element *c;
+
+  if (!tm_print_insn) /* Someone may have already set it */
+    tm_print_insn = gdb_print_insn_mips;
+
+  /* Let the user turn off floating point and set the fence post for
+     heuristic_proc_start.  */
+
+  add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command,
+		  "Set use of MIPS floating-point coprocessor.",
+		  &mipsfpulist, "set mipsfpu ", 0, &setlist);
+  add_cmd ("single", class_support, set_mipsfpu_single_command,
+	   "Select single-precision MIPS floating-point coprocessor.",
+	   &mipsfpulist);
+  add_cmd ("double", class_support, set_mipsfpu_double_command,
+	   "Select double-precision MIPS floating-point coprocessor .",
+	   &mipsfpulist);
+  add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist);
+  add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist);
+  add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist);
+  add_cmd ("none", class_support, set_mipsfpu_none_command,
+	   "Select no MIPS floating-point coprocessor.",
+	   &mipsfpulist);
+  add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist);
+  add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist);
+  add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist);
+  add_cmd ("auto", class_support, set_mipsfpu_auto_command,
+	   "Select MIPS floating-point coprocessor automatically.",
+	   &mipsfpulist);
+  add_cmd ("mipsfpu", class_support, show_mipsfpu_command,
+	   "Show current use of MIPS floating-point coprocessor target.",
+	   &showlist);
+
+  c = add_set_cmd ("processor", class_support, var_string_noescape,
+		   (char *) &tmp_mips_processor_type,
+		   "Set the type of MIPS processor in use.\n\
+Set this to be able to access processor-type-specific registers.\n\
+",
+		   &setlist);
+  c->function.cfunc = mips_set_processor_type_command;
+  c = add_show_from_set (c, &showlist);
+  c->function.cfunc = mips_show_processor_type_command;
+
+  tmp_mips_processor_type = strsave (DEFAULT_MIPS_TYPE);
+  mips_set_processor_type_command (strsave (DEFAULT_MIPS_TYPE), 0);
+
+  /* We really would like to have both "0" and "unlimited" work, but
+     command.c doesn't deal with that.  So make it a var_zinteger
+     because the user can always use "999999" or some such for unlimited.  */
+  c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger,
+		   (char *) &heuristic_fence_post,
+		   "\
+Set the distance searched for the start of a function.\n\
+If you are debugging a stripped executable, GDB needs to search through the\n\
+program for the start of a function.  This command sets the distance of the\n\
+search.  The only need to set it is when debugging a stripped executable.",
+		   &setlist);
+  /* We need to throw away the frame cache when we set this, since it
+     might change our ability to get backtraces.  */
+  c->function.sfunc = reinit_frame_cache_sfunc;
+  add_show_from_set (c, &showlist);
+
+  /* Allow the user to control whether the upper bits of 64-bit
+     addresses should be zeroed.  */
+  add_show_from_set
+    (add_set_cmd ("mask-address", no_class, var_boolean, (char *)&mask_address_p,
+	   "Set zeroing of upper 32 bits of 64-bit addresses.\n\
+Use \"on\" to enable the masking, and \"off\" to disable it.\n\
+Without an argument, zeroing of upper address bits is enabled.", &setlist),
+     &showlist);
+}
diff --git a/gdb/mipsm3-nat.c b/gdb/mipsm3-nat.c
new file mode 100644
index 0000000..089ecd6
--- /dev/null
+++ b/gdb/mipsm3-nat.c
@@ -0,0 +1,386 @@
+/* Definitions to make GDB run on a mips box under Mach 3.0
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Mach specific routines for little endian mips (e.g. pmax)
+ * running Mach 3.0
+ *
+ * Author: Jukka Virtanen <jtv@hut.fi>
+ */
+
+#include "defs.h"
+#include "inferior.h"
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+/* Find offsets to thread states at compile time.
+ * If your compiler does not grok this, check the hand coded
+ * offsets and use them.
+ */
+
+#if 1
+
+#define  REG_OFFSET(reg) (int)(&((struct mips_thread_state *)0)->reg)
+#define CREG_OFFSET(reg) (int)(&((struct mips_float_state *)0)->reg)
+#define EREG_OFFSET(reg) (int)(&((struct mips_exc_state *)0)->reg)
+
+/* at reg_offset[i] is the offset to the mips_thread_state
+ * location where the gdb registers[i] is stored.
+ *
+ * -1 means mach does not save it anywhere.
+ */
+static int reg_offset[] = 
+{
+  /*  zero		at		  v0		    v1       */
+      -1,           REG_OFFSET(r1),   REG_OFFSET(r2),   REG_OFFSET(r3),
+
+  /*  a0		a1		  a2		    a3       */
+  REG_OFFSET(r4),   REG_OFFSET(r5),   REG_OFFSET(r6),   REG_OFFSET(r7),
+
+  /*  t0		t1		  t2		    t3       */
+  REG_OFFSET(r8),   REG_OFFSET(r9),   REG_OFFSET(r10),  REG_OFFSET(r11),
+
+  /*  t4		t5		  t6		    t7       */
+  REG_OFFSET(r12),  REG_OFFSET(r13),  REG_OFFSET(r14),  REG_OFFSET(r15),
+
+  /*  s0		s1		  s2		    s3       */
+  REG_OFFSET(r16),  REG_OFFSET(r17),  REG_OFFSET(r18),  REG_OFFSET(r19),
+
+  /*  s4		s5		  s6		    s7       */
+  REG_OFFSET(r20),  REG_OFFSET(r21),  REG_OFFSET(r22),  REG_OFFSET(r23),
+
+  /*  t8		t9		  k0		    k1       */
+  REG_OFFSET(r24),  REG_OFFSET(r25),  REG_OFFSET(r26),  REG_OFFSET(r27),
+
+  /*  gp		sp	      s8(30) == fp(72)	    ra       */
+  REG_OFFSET(r28),  REG_OFFSET(r29),  REG_OFFSET(r30),  REG_OFFSET(r31),
+
+  /*  sr(32) PS_REGNUM   */
+  EREG_OFFSET(coproc_state),
+
+  /*  lo(33)		hi(34)    */
+  REG_OFFSET(mdlo), REG_OFFSET(mdhi),
+
+  /*  bad(35)          	      cause(36)	         pc(37)  */
+  EREG_OFFSET(address),  EREG_OFFSET(cause), REG_OFFSET(pc),
+
+  /*  f0(38)		 f1(39)		    f2(40)	       f3(41)   */
+  CREG_OFFSET(r0),   CREG_OFFSET(r1),   CREG_OFFSET(r2),   CREG_OFFSET(r3),
+  CREG_OFFSET(r4),   CREG_OFFSET(r5),   CREG_OFFSET(r6),   CREG_OFFSET(r7),
+  CREG_OFFSET(r8),   CREG_OFFSET(r9),   CREG_OFFSET(r10),  CREG_OFFSET(r11),
+  CREG_OFFSET(r12),  CREG_OFFSET(r13),  CREG_OFFSET(r14),  CREG_OFFSET(r15),
+  CREG_OFFSET(r16),  CREG_OFFSET(r17),  CREG_OFFSET(r18),  CREG_OFFSET(r19),
+  CREG_OFFSET(r20),  CREG_OFFSET(r21),  CREG_OFFSET(r22),  CREG_OFFSET(r23),
+  CREG_OFFSET(r24),  CREG_OFFSET(r25),  CREG_OFFSET(r26),  CREG_OFFSET(r27),
+  CREG_OFFSET(r28),  CREG_OFFSET(r29),  CREG_OFFSET(r30),  CREG_OFFSET(r31),
+
+  /*  fsr(70)		fir(71)		fp(72) == s8(30) */
+  CREG_OFFSET(csr),  CREG_OFFSET(esr),  REG_OFFSET(r30)
+};
+#else
+/* If the compiler does not grok the above defines */
+static int reg_offset[] = 
+{
+/* mach_thread_state offsets: */
+  -1,  0,  4,  8,  12, 16, 20, 24,  28, 32, 36, 40,  44, 48, 52, 56,
+  60, 64, 68, 72,  76, 80, 84, 88,  92, 96,100,104, 108,112,116,120,
+/*sr, lo, hi,addr,cause,pc   */
+   8,124,128,  4,   0,132,
+/* mach_float_state offsets: */
+   0,  4,  8, 12,  16, 20, 24, 28,  32, 36, 40, 44,  48, 52, 56, 60,
+  64, 68, 72, 76,  80, 84, 88, 92,  96,100,104,108, 112,116,120,124,
+/*fsr,fir*/
+ 128,132,
+/* FP_REGNUM pseudo maps to s8==r30 in mach_thread_state */
+ 116
+};
+#endif
+
+/* Fetch COUNT contiguous registers from thread STATE starting from REGNUM
+ * Caller knows that the regs handled in one transaction are of same size.
+ */
+#define FETCH_REGS(state, regnum, count) \
+  memcpy (&registers[REGISTER_BYTE (regnum)], \
+	  (char *)state+reg_offset[ regnum ], \
+	  count*REGISTER_SIZE)
+
+/* Store COUNT contiguous registers to thread STATE starting from REGNUM */
+#define STORE_REGS(state, regnum, count) \
+  memcpy ((char *)state+reg_offset[ regnum ], \
+	  &registers[REGISTER_BYTE (regnum)], \
+	  count*REGISTER_SIZE)
+
+#define REGS_ALL    -1
+#define REGS_NORMAL  1
+#define REGS_EXC     2
+#define REGS_COP1    4
+
+/* Hardware regs that matches FP_REGNUM */
+#define MACH_FP_REGNUM 30
+
+/* Fech thread's registers. if regno == -1, fetch all regs */
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;  
+
+  thread_state_data_t      state;
+  struct mips_exc_state    exc_state;
+
+  int stateCnt   = MIPS_THREAD_STATE_COUNT;
+
+  int which_regs = 0; /* A bit mask */
+
+  if (! MACH_PORT_VALID (current_thread))
+    error ("fetch inferior registers: Invalid thread");
+  
+  if (regno < -1 || regno >= NUM_REGS)
+    error ("invalid register %d supplied to fetch_inferior_registers", regno);
+
+  if (regno == -1)
+    which_regs = REGS_ALL;
+  else if (regno == ZERO_REGNUM)
+    {
+      int zero = 0;
+      supply_register (ZERO_REGNUM, &zero);
+      return;
+    }
+  else if ((ZERO_REGNUM < regno && regno < PS_REGNUM)
+	   || regno == FP_REGNUM
+	   || regno == LO_REGNUM
+	   || regno == HI_REGNUM
+	   || regno == PC_REGNUM)
+    which_regs = REGS_NORMAL;
+  else if (FP0_REGNUM <= regno && regno <= FCRIR_REGNUM)
+    which_regs = REGS_COP1 | REGS_EXC;
+  else
+    which_regs = REGS_EXC;
+
+  /* fetch regs saved to mips_thread_state */
+  if (which_regs & REGS_NORMAL)
+    {
+      ret = thread_get_state (current_thread,
+			      MIPS_THREAD_STATE,
+			      state,
+			      &stateCnt);
+      CHK ("fetch inferior registers: thread_get_state", ret);
+
+      if (which_regs == REGS_NORMAL)
+	{
+	  /* Fetch also FP_REGNUM if fetching MACH_FP_REGNUM and vice versa */
+	  if (regno == MACH_FP_REGNUM || regno == FP_REGNUM)
+	    {
+	      supply_register (FP_REGNUM,
+			       (char *)state+reg_offset[ MACH_FP_REGNUM ]);
+	      supply_register (MACH_FP_REGNUM,
+			       (char *)state+reg_offset[ MACH_FP_REGNUM ]);
+	    }
+	  else
+	    supply_register (regno,
+			     (char *)state+reg_offset[ regno ]);
+	  return;
+	}
+			   
+      /* ZERO_REGNUM is always zero */
+      *(int *) registers = 0;
+      
+      /* Copy thread saved regs 1..31 to gdb's reg value array
+       * Luckily, they are contiquous
+       */
+      FETCH_REGS (state, 1, 31);
+      
+      /* Copy mdlo and mdhi */
+      FETCH_REGS (state, LO_REGNUM, 2);
+
+      /* Copy PC */
+      FETCH_REGS (state, PC_REGNUM, 1);
+
+      /* Mach 3.0 saves FP to MACH_FP_REGNUM.
+       * For some reason gdb wants to assign a pseudo register for it.
+       */
+      FETCH_REGS (state, FP_REGNUM, 1);
+    }
+
+  /* Read exc state. Also read if need to fetch floats */
+  if (which_regs & REGS_EXC)
+    {
+      stateCnt = MIPS_EXC_STATE_COUNT;
+      ret = thread_get_state (current_thread,
+			      MIPS_EXC_STATE,
+			      (thread_state_t) &exc_state,
+			      &stateCnt);
+      CHK ("fetch inferior regs (exc): thread_get_state", ret);
+
+      /* We need to fetch exc_state to see if the floating
+       * state is valid for the thread.
+       */
+
+      /* cproc_state: Which coprocessors the thread uses */
+      supply_register (PS_REGNUM,
+		       (char *)&exc_state+reg_offset[ PS_REGNUM ]);
+      
+      if (which_regs == REGS_EXC || which_regs == REGS_ALL)
+	{
+	  supply_register (BADVADDR_REGNUM,
+			   (char *)&exc_state+reg_offset[ BADVADDR_REGNUM ]);
+	  
+	  supply_register (CAUSE_REGNUM,
+			   (char *)&exc_state+reg_offset[ CAUSE_REGNUM ]);
+	  if (which_regs == REGS_EXC)
+	    return;
+	}
+    }
+
+
+  if (which_regs & REGS_COP1)
+    {
+      /* If the thread does not have saved COPROC1, set regs to zero */
+      
+      if (! (exc_state.coproc_state & MIPS_STATUS_USE_COP1))
+	bzero (&registers[ REGISTER_BYTE (FP0_REGNUM) ],
+	       sizeof (struct mips_float_state));
+      else
+	{
+	  stateCnt = MIPS_FLOAT_STATE_COUNT;
+	  ret = thread_get_state (current_thread,
+				  MIPS_FLOAT_STATE,
+				  state,
+				  &stateCnt);
+	  CHK ("fetch inferior regs (floats): thread_get_state", ret);
+	  
+	  if (regno != -1)
+	    {
+	      supply_register (regno,
+			       (char *)state+reg_offset[ regno ]);
+	      return;
+	    }
+	  
+	  FETCH_REGS (state, FP0_REGNUM, 34);
+	}
+    }
+  
+  /* All registers are valid, if not returned yet */
+  registers_fetched ();
+}
+
+/* Store gdb's view of registers to the thread.
+ * All registers are always valid when entering here.
+ * @@ ahem, maybe that is too strict, we could validate the necessary ones
+ *    here.
+ *
+ * Hmm. It seems that gdb set $reg=value command first reads everything,
+ * then sets the reg and then stores everything. -> we must make sure
+ * that the immutable registers are not changed by reading them first.
+ */
+
+void
+store_inferior_registers (regno)
+     register int regno;
+{
+  thread_state_data_t state;
+  kern_return_t ret;
+  
+  if (! MACH_PORT_VALID (current_thread))
+    error ("store inferior registers: Invalid thread");
+  
+  /* Check for read only regs.
+   * @@ If some of these is can be changed, fix this
+   */
+  if (regno == ZERO_REGNUM	||
+      regno == PS_REGNUM	||
+      regno == BADVADDR_REGNUM	||
+      regno == CAUSE_REGNUM	||
+      regno == FCRIR_REGNUM)
+    {
+      message ("You can not alter read-only register `%s'",
+	       REGISTER_NAME ( regno ));
+      fetch_inferior_registers (regno);
+      return;
+    }
+
+  if (regno == -1)
+    {
+      /* Don't allow these to change */
+
+      /* ZERO_REGNUM */
+      *(int *)registers = 0;
+      
+      fetch_inferior_registers (PS_REGNUM);
+      fetch_inferior_registers (BADVADDR_REGNUM);
+      fetch_inferior_registers (CAUSE_REGNUM);
+      fetch_inferior_registers (FCRIR_REGNUM);
+    }
+
+  if (regno == -1 || (ZERO_REGNUM < regno && regno <= PC_REGNUM))
+    {
+#if 1
+      /* Mach 3.0 saves thread's FP to MACH_FP_REGNUM.
+       * GDB wants assigns a pseudo register FP_REGNUM for frame pointer.
+       *
+       * @@@ Here I assume (!) that gdb's FP has the value that
+       *     should go to threads frame pointer. If not true, this
+       *     fails badly!!!!!
+       */
+      memcpy (&registers[REGISTER_BYTE (MACH_FP_REGNUM)],
+	      &registers[REGISTER_BYTE (FP_REGNUM)],
+	      REGISTER_RAW_SIZE (FP_REGNUM));
+#endif
+      
+      /* Save gdb's regs 1..31 to thread saved regs 1..31
+       * Luckily, they are contiquous
+       */
+      STORE_REGS (state, 1, 31);
+
+      /* Save mdlo, mdhi */
+      STORE_REGS (state, LO_REGNUM, 2);
+
+     /* Save PC */
+      STORE_REGS (state, PC_REGNUM, 1);
+
+      ret = thread_set_state (current_thread,
+			      MIPS_THREAD_STATE,
+			      state,
+			      MIPS_FLOAT_STATE_COUNT);
+      CHK ("store inferior regs : thread_set_state", ret);
+    }
+  
+  if (regno == -1 || regno >= FP0_REGNUM)
+    {
+      /* If thread has floating state, save it */
+      if (read_register (PS_REGNUM) & MIPS_STATUS_USE_COP1)
+	{
+	  /* Do NOT save FCRIR_REGNUM */
+	  STORE_REGS (state, FP0_REGNUM, 33);
+	
+	  ret = thread_set_state (current_thread,
+				  MIPS_FLOAT_STATE,
+				  state,
+				  MIPS_FLOAT_STATE_COUNT);
+	  CHK ("store inferior registers (floats): thread_set_state", ret);
+	}
+      else if (regno != -1)
+	message
+	  ("Thread does not use floating point unit, floating regs not saved");
+    }
+}
diff --git a/gdb/mipsread.c b/gdb/mipsread.c
new file mode 100644
index 0000000..614c27e
--- /dev/null
+++ b/gdb/mipsread.c
@@ -0,0 +1,446 @@
+/* Read a symbol table in MIPS' format (Third-Eye).
+   Copyright 1986, 87, 89, 90, 91, 92, 93, 94, 95, 96, 1998
+   Free Software Foundation, Inc.
+   Contributed by Alessandro Forin (af@cs.cmu.edu) at CMU.  Major work
+   by Per Bothner, John Gilmore and Ian Lance Taylor at Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Read symbols from an ECOFF file.  Most of the work is done in
+   mdebugread.c.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "bfd.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "gdb-stabs.h"
+
+#include "coff/sym.h"
+#include "coff/internal.h"
+#include "coff/ecoff.h"
+#include "libcoff.h"		/* Private BFD COFF information.  */
+#include "libecoff.h"		/* Private BFD ECOFF information.  */
+#include "elf/common.h"
+#include "elf/mips.h"
+
+static void
+mipscoff_new_init PARAMS ((struct objfile *));
+
+static void
+mipscoff_symfile_init PARAMS ((struct objfile *));
+
+static void
+mipscoff_symfile_read PARAMS ((struct objfile *, struct section_offsets *,
+			       int));
+
+static void
+mipscoff_symfile_finish PARAMS ((struct objfile *));
+
+static void
+read_alphacoff_dynamic_symtab PARAMS ((struct section_offsets *,
+				       struct objfile *objfile));
+
+/* Initialize anything that needs initializing when a completely new
+   symbol file is specified (not just adding some symbols from another
+   file, e.g. a shared library).  */
+
+extern CORE_ADDR sigtramp_address;
+
+static void
+mipscoff_new_init (ignore)
+     struct objfile *ignore;
+{
+  sigtramp_address = 0;
+  stabsread_new_init ();
+  buildsym_new_init ();
+}
+
+/* Initialize to read a symbol file (nothing to do).  */
+
+static void
+mipscoff_symfile_init (objfile)
+     struct objfile *objfile;
+{
+}
+
+/* Read a symbol file from a file.  */
+
+static void
+mipscoff_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile->obfd;
+  struct cleanup * back_to;
+
+  init_minimal_symbol_collection ();
+  back_to = make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* Now that the executable file is positioned at symbol table,
+     process it and define symbols accordingly.  */
+
+  if (!((*ecoff_backend (abfd)->debug_swap.read_debug_info)
+	(abfd, (asection *) NULL, &ecoff_data (abfd)->debug_info)))
+    error ("Error reading symbol table: %s", bfd_errmsg (bfd_get_error ()));
+
+  mdebug_build_psymtabs (objfile, &ecoff_backend (abfd)->debug_swap,
+			 &ecoff_data (abfd)->debug_info, section_offsets);
+
+  /* Add alpha coff dynamic symbols.  */
+
+  read_alphacoff_dynamic_symtab (section_offsets, objfile);
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+
+  /* If the entry_file bounds are still unknown after processing the
+     partial symbols, then try to set them from the minimal symbols
+     surrounding the entry_point.  */
+
+  if (mainline
+      && objfile->ei.entry_point != INVALID_ENTRY_POINT
+      && objfile->ei.entry_file_lowpc == INVALID_ENTRY_LOWPC)
+    {
+      struct minimal_symbol *m;
+
+      m = lookup_minimal_symbol_by_pc (objfile->ei.entry_point);
+      if (m && SYMBOL_NAME (m + 1))
+	{
+	  objfile->ei.entry_file_lowpc = SYMBOL_VALUE_ADDRESS (m);
+	  objfile->ei.entry_file_highpc = SYMBOL_VALUE_ADDRESS (m + 1);
+	}
+    }
+
+  do_cleanups (back_to);
+}
+
+/* Perform any local cleanups required when we are done with a
+   particular objfile.  */
+
+static void
+mipscoff_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+}
+
+/* Alpha OSF/1 encapsulates the dynamic symbols in ELF format in a
+   standard coff section.  The ELF format for the symbols differs from
+   the format defined in elf/external.h. It seems that a normal ELF 32 bit
+   format is used, and the representation only changes because longs are
+   64 bit on the alpha. In addition, the handling of text/data section
+   indices for symbols is different from the ELF ABI.
+   As the BFD linker currently does not support dynamic linking on the alpha,
+   there seems to be no reason to pollute BFD with another mixture of object
+   file formats for now.  */
+
+/* Format of an alpha external ELF symbol.  */
+
+typedef struct {
+  unsigned char	st_name[4];		/* Symbol name, index in string tbl */
+  unsigned char	st_pad[4];		/* Pad to long word boundary */
+  unsigned char	st_value[8];		/* Value of the symbol */
+  unsigned char	st_size[4];		/* Associated symbol size */
+  unsigned char	st_info[1];		/* Type and binding attributes */
+  unsigned char	st_other[1];		/* No defined meaning, 0 */
+  unsigned char	st_shndx[2];		/* Associated section index */
+} Elfalpha_External_Sym;
+
+/* Format of an alpha external ELF dynamic info structure.  */
+
+typedef struct {
+  unsigned char	d_tag[4];		/* Tag */
+  unsigned char	d_pad[4];		/* Pad to long word boundary */
+  union {
+    unsigned char d_ptr[8];		/* Pointer value */
+    unsigned char d_val[4];		/* Integer value */
+  } d_un;
+} Elfalpha_External_Dyn;
+
+/* Struct to obtain the section pointers for alpha dynamic symbol info.  */
+
+struct alphacoff_dynsecinfo {
+  asection *sym_sect;		/* Section pointer for .dynsym section */
+  asection *str_sect;		/* Section pointer for .dynstr section */
+  asection *dyninfo_sect;	/* Section pointer for .dynamic section */
+  asection *got_sect;		/* Section pointer for .got section */
+};
+
+static void
+alphacoff_locate_sections PARAMS ((bfd *, asection *, void *));
+
+/* We are called once per section from read_alphacoff_dynamic_symtab.
+   We need to examine each section we are passed, check to see
+   if it is something we are interested in processing, and
+   if so, stash away some access information for the section.  */
+
+static void
+alphacoff_locate_sections (ignore_abfd, sectp, sip)
+     bfd *ignore_abfd;
+     asection *sectp;
+     PTR sip;
+{
+  register struct alphacoff_dynsecinfo *si;
+
+  si = (struct alphacoff_dynsecinfo *) sip;
+
+  if (STREQ (sectp->name, ".dynsym"))
+    {
+      si->sym_sect = sectp;
+    }
+  else if (STREQ (sectp->name, ".dynstr"))
+    {
+      si->str_sect = sectp;
+    }
+  else if (STREQ (sectp->name, ".dynamic"))
+    {
+      si->dyninfo_sect = sectp;
+    }
+  else if (STREQ (sectp->name, ".got"))
+    {
+      si->got_sect = sectp;
+    }
+}
+
+/* Scan an alpha dynamic symbol table for symbols of interest and
+   add them to the minimal symbol table.  */
+
+static void
+read_alphacoff_dynamic_symtab (section_offsets, objfile)
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  bfd *abfd = objfile->obfd;
+  struct alphacoff_dynsecinfo si;
+  char *sym_secptr;
+  char *str_secptr;
+  char *dyninfo_secptr;
+  char *got_secptr;
+  bfd_size_type sym_secsize;
+  bfd_size_type str_secsize;
+  bfd_size_type dyninfo_secsize;
+  bfd_size_type got_secsize;
+  int sym_count;
+  int i;
+  int stripped;
+  Elfalpha_External_Sym *x_symp;
+  char *dyninfo_p;
+  char *dyninfo_end;
+  int got_entry_size = 8;
+  int dt_mips_local_gotno = -1;
+  int dt_mips_gotsym = -1;
+
+
+  /* We currently only know how to handle alpha dynamic symbols.  */
+  if (bfd_get_arch (abfd) != bfd_arch_alpha)
+    return;
+
+  /* Locate the dynamic symbols sections and read them in.  */
+  memset ((char *) &si, 0, sizeof (si));
+  bfd_map_over_sections (abfd, alphacoff_locate_sections, (PTR) &si);
+  if (si.sym_sect == NULL
+      || si.str_sect == NULL
+      || si.dyninfo_sect == NULL
+      || si.got_sect == NULL)
+    return;
+
+  sym_secsize = bfd_get_section_size_before_reloc (si.sym_sect);
+  str_secsize = bfd_get_section_size_before_reloc (si.str_sect);
+  dyninfo_secsize = bfd_get_section_size_before_reloc (si.dyninfo_sect);
+  got_secsize = bfd_get_section_size_before_reloc (si.got_sect);
+  sym_secptr = alloca (sym_secsize);
+  str_secptr = alloca (str_secsize);
+  dyninfo_secptr = alloca (dyninfo_secsize);
+  got_secptr = alloca (got_secsize);
+
+  if (!bfd_get_section_contents (abfd, si.sym_sect, sym_secptr,
+				 (file_ptr)0, sym_secsize))
+    return;
+  if (!bfd_get_section_contents (abfd, si.str_sect, str_secptr,
+				 (file_ptr)0, str_secsize))
+    return;
+  if (!bfd_get_section_contents (abfd, si.dyninfo_sect, dyninfo_secptr,
+				 (file_ptr)0, dyninfo_secsize))
+    return;
+  if (!bfd_get_section_contents (abfd, si.got_sect, got_secptr,
+				 (file_ptr)0, got_secsize))
+    return;
+
+  /* Find the number of local GOT entries and the index for the
+     the first dynamic symbol in the GOT. */
+  for (dyninfo_p = dyninfo_secptr, dyninfo_end = dyninfo_p + dyninfo_secsize;
+       dyninfo_p < dyninfo_end;
+       dyninfo_p += sizeof (Elfalpha_External_Dyn))
+    {
+      Elfalpha_External_Dyn *x_dynp = (Elfalpha_External_Dyn *)dyninfo_p;
+      long dyn_tag;
+
+      dyn_tag = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp->d_tag);
+      if (dyn_tag == DT_NULL)
+	break;
+      else if (dyn_tag == DT_MIPS_LOCAL_GOTNO)
+	{
+	  if (dt_mips_local_gotno < 0)
+	    dt_mips_local_gotno
+	      = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp->d_un.d_val);
+	}
+      else if (dyn_tag == DT_MIPS_GOTSYM)
+	{
+	  if (dt_mips_gotsym < 0)
+	    dt_mips_gotsym
+	      = bfd_h_get_32 (abfd, (bfd_byte *) x_dynp->d_un.d_val);
+	}
+    }
+  if (dt_mips_local_gotno < 0 || dt_mips_gotsym < 0)
+    return;
+
+  /* Scan all dynamic symbols and enter them into the minimal symbol table
+     if appropriate.  */
+  sym_count = sym_secsize / sizeof (Elfalpha_External_Sym);
+  stripped = (bfd_get_symcount (abfd) == 0);
+
+  /* Skip first symbol, which is a null dummy.  */
+  for (i = 1, x_symp = (Elfalpha_External_Sym *) sym_secptr + 1;
+       i < sym_count;
+       i++, x_symp++)
+    {
+      unsigned long strx;
+      char *name;
+      bfd_vma sym_value;
+      unsigned char sym_info;
+      unsigned int sym_shndx;
+      int isglobal;
+      enum minimal_symbol_type ms_type;
+
+      strx = bfd_h_get_32 (abfd, (bfd_byte *) x_symp->st_name);
+      if (strx >= str_secsize)
+	continue;
+      name = str_secptr + strx;
+      if (*name == '\0' || *name == '.')
+	continue;
+
+      sym_value = bfd_h_get_64 (abfd, (bfd_byte *) x_symp->st_value);
+      sym_info = bfd_h_get_8 (abfd, (bfd_byte *) x_symp->st_info);
+      sym_shndx = bfd_h_get_16 (abfd, (bfd_byte *) x_symp->st_shndx);
+      isglobal = (ELF_ST_BIND (sym_info) == STB_GLOBAL);
+
+      if (sym_shndx == SHN_UNDEF)
+	{
+	  /* Handle undefined functions which are defined in a shared
+	     library.  */
+	  if (ELF_ST_TYPE (sym_info) != STT_FUNC
+	      || ELF_ST_BIND (sym_info) != STB_GLOBAL)
+	    continue;
+
+	  ms_type = mst_solib_trampoline;
+
+	  /* If sym_value is nonzero, it points to the shared library
+	     trampoline entry, which is what we are looking for.
+
+	     If sym_value is zero, then we have to get the GOT entry
+	     for the symbol.
+	     If the GOT entry is nonzero, it represents the quickstart
+	     address of the function and we use that as the symbol value.
+
+	     If the GOT entry is zero, the function address has to be resolved
+	     by the runtime loader before the executable is started.
+	     We are unable to find any meaningful address for these
+	     functions in the executable file, so we skip them.  */
+	  if (sym_value == 0)
+	    {
+	      int got_entry_offset =
+		(i - dt_mips_gotsym + dt_mips_local_gotno) * got_entry_size;
+
+	      if (got_entry_offset < 0 || got_entry_offset >= got_secsize)
+		continue;
+	      sym_value =
+		bfd_h_get_64 (abfd,
+			      (bfd_byte *) (got_secptr + got_entry_offset));
+	      if (sym_value == 0)
+		continue;
+	    }
+	}
+      else
+	{
+	  /* Symbols defined in the executable itself. We only care about
+	     them if this is a stripped executable, otherwise they have
+	     been retrieved from the normal symbol table already.  */
+	  if (!stripped)
+	    continue;
+
+	  if (sym_shndx == SHN_MIPS_TEXT)
+	    {
+	      if (isglobal)
+		ms_type = mst_text;
+	      else
+		ms_type = mst_file_text;
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	    }
+	  else if (sym_shndx == SHN_MIPS_DATA)
+	    {
+	      if (isglobal)
+		ms_type = mst_data;
+	      else
+		ms_type = mst_file_data;
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	    }
+	  else if (sym_shndx == SHN_MIPS_ACOMMON)
+	    {
+	      if (isglobal)
+		ms_type = mst_bss;
+	      else
+		ms_type = mst_file_bss;
+	      sym_value += ANOFFSET (section_offsets, SECT_OFF_BSS);
+	    }
+	  else if (sym_shndx == SHN_ABS)
+	    {
+	      ms_type = mst_abs;
+	    }
+	  else
+	    {
+	      continue;
+	    }
+	}
+
+      prim_record_minimal_symbol (name, sym_value, ms_type, objfile);
+    }
+}
+
+/* Initialization */
+
+static struct sym_fns ecoff_sym_fns =
+{
+  bfd_target_ecoff_flavour,
+  mipscoff_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  mipscoff_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  mipscoff_symfile_read,	/* sym_read: read a symbol file into symtab */
+  mipscoff_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,	/* sym_offsets: dummy FIXME til implem sym reloc */
+  NULL				/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_mipsread ()
+{
+  add_symtab_fns (&ecoff_sym_fns);
+}
diff --git a/gdb/mipsv4-nat.c b/gdb/mipsv4-nat.c
new file mode 100644
index 0000000..df4b6e9
--- /dev/null
+++ b/gdb/mipsv4-nat.c
@@ -0,0 +1,159 @@
+/* Native support for MIPS running SVR4, for GDB.
+   Copyright 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+
+#include <sys/time.h>
+#include <sys/procfs.h>
+#include <setjmp.h>		/* For JB_XXX.  */
+
+/* Size of elements in jmpbuf */
+
+#define JB_ELEMENT_SIZE 4
+
+/*
+ * See the comment in m68k-tdep.c regarding the utility of these functions.
+ *
+ * These definitions are from the MIPS SVR4 ABI, so they may work for
+ * any MIPS SVR4 target.
+ */
+
+void 
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+  register int regi;
+  register greg_t *regp = &(*gregsetp)[0];
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for (regi = 0; regi <= CXT_RA; regi++)
+    supply_register (regi, (char *)(regp + regi));
+
+  supply_register (PC_REGNUM, (char *)(regp + CXT_EPC));
+  supply_register (HI_REGNUM, (char *)(regp + CXT_MDHI));
+  supply_register (LO_REGNUM, (char *)(regp + CXT_MDLO));
+  supply_register (CAUSE_REGNUM, (char *)(regp + CXT_CAUSE));
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (PS_REGNUM, zerobuf);
+  supply_register (BADVADDR_REGNUM, zerobuf);
+  supply_register (FP_REGNUM, zerobuf);
+  supply_register (UNUSED_REGNUM, zerobuf);
+  for (regi = FIRST_EMBED_REGNUM; regi <= LAST_EMBED_REGNUM; regi++)
+    supply_register (regi, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  register greg_t *regp = &(*gregsetp)[0];
+
+  for (regi = 0; regi <= 32; regi++)
+    if ((regno == -1) || (regno == regi))
+      *(regp + regi) = *(greg_t *) &registers[REGISTER_BYTE (regi)];
+
+  if ((regno == -1) || (regno == PC_REGNUM))
+    *(regp + CXT_EPC) = *(greg_t *) &registers[REGISTER_BYTE (PC_REGNUM)];
+
+  if ((regno == -1) || (regno == CAUSE_REGNUM))
+    *(regp + CXT_CAUSE) = *(greg_t *) &registers[REGISTER_BYTE (CAUSE_REGNUM)];
+
+  if ((regno == -1) || (regno == HI_REGNUM))
+    *(regp + CXT_MDHI) = *(greg_t *) &registers[REGISTER_BYTE (HI_REGNUM)];
+
+  if ((regno == -1) || (regno == LO_REGNUM))
+    *(regp + CXT_MDLO) = *(greg_t *) &registers[REGISTER_BYTE (LO_REGNUM)];
+}
+
+/*
+ * Now we do the same thing for floating-point registers.
+ * We don't bother to condition on FP0_REGNUM since any
+ * reasonable MIPS configuration has an R3010 in it.
+ *
+ * Again, see the comments in m68k-tdep.c.
+ */
+
+void
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  register int regi;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  for (regi = 0; regi < 32; regi++)
+    supply_register (FP0_REGNUM + regi,
+		     (char *)&fpregsetp->fp_r.fp_regs[regi]);
+
+  supply_register (FCRCS_REGNUM, (char *)&fpregsetp->fp_csr);
+
+  /* FIXME: how can we supply FCRIR_REGNUM?  The ABI doesn't tell us. */
+  supply_register (FCRIR_REGNUM, zerobuf);
+}
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  char *from, *to;
+
+  for (regi = FP0_REGNUM; regi < FP0_REGNUM + 32; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &(fpregsetp->fp_r.fp_regs[regi - FP0_REGNUM]);
+	  memcpy(to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+
+  if ((regno == -1) || (regno == FCRCS_REGNUM))
+    fpregsetp->fp_csr = *(unsigned *) &registers[REGISTER_BYTE(FCRCS_REGNUM)];
+}
+
+
+/* Figure out where the longjmp will land.
+   We expect the first arg to be a pointer to the jmp_buf structure from which
+   we extract the pc (_JB_PC) that we will land at.  The pc is copied into PC.
+   This routine returns true on success. */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
+  CORE_ADDR jb_addr;
+
+  jb_addr = read_register (A0_REGNUM);
+
+  if (target_read_memory (jb_addr + _JB_PC * JB_ELEMENT_SIZE, buf,
+			  TARGET_PTR_BIT / TARGET_CHAR_BIT))
+    return 0;
+
+  *pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+
+  return 1;
+}
diff --git a/gdb/mn10200-tdep.c b/gdb/mn10200-tdep.c
new file mode 100644
index 0000000..cb7ead0
--- /dev/null
+++ b/gdb/mn10200-tdep.c
@@ -0,0 +1,919 @@
+/* Target-dependent code for the Matsushita MN10200 for GDB, the GNU debugger.
+   Copyright 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+#include "symfile.h"
+
+  	
+/* Should call_function allocate stack space for a struct return?  */
+int
+mn10200_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_NFIELDS (type) > 1 || TYPE_LENGTH (type) > 8);
+}
+
+
+
+/* The main purpose of this file is dealing with prologues to extract
+   information about stack frames and saved registers.
+
+   For reference here's how prologues look on the mn10200:
+
+     With frame pointer:
+	mov fp,a0
+	mov sp,fp
+	add <size>,sp
+	Register saves for d2, d3, a1, a2 as needed.  Saves start
+	at fp - <size> + <outgoing_args_size> and work towards higher
+	addresses.  Note that the saves are actually done off the stack
+	pointer in the prologue!  This makes for smaller code and easier
+	prologue scanning as the displacement fields will unlikely
+        be more than 8 bits!
+
+     Without frame pointer:
+        add <size>,sp
+	Register saves for d2, d3, a1, a2 as needed.  Saves start
+	at sp + <outgoing_args_size> and work towards higher addresses.
+
+     Out of line prologue:
+	add <local size>,sp  -- optional
+	jsr __prologue
+	add <outgoing_size>,sp -- optional
+
+   The stack pointer remains constant throughout the life of most
+   functions.  As a result the compiler will usually omit the
+   frame pointer, so we must handle frame pointerless functions.  */
+
+/* Analyze the prologue to determine where registers are saved,
+   the end of the prologue, etc etc.  Return the end of the prologue
+   scanned.
+
+   We store into FI (if non-null) several tidbits of information:
+
+    * stack_size -- size of this stack frame.  Note that if we stop in
+    certain parts of the prologue/epilogue we may claim the size of the
+    current frame is zero.  This happens when the current frame has
+    not been allocated yet or has already been deallocated.
+
+    * fsr -- Addresses of registers saved in the stack by this frame.
+
+    * status -- A (relatively) generic status indicator.  It's a bitmask
+    with the following bits: 
+
+      MY_FRAME_IN_SP: The base of the current frame is actually in
+      the stack pointer.  This can happen for frame pointerless
+      functions, or cases where we're stopped in the prologue/epilogue
+      itself.  For these cases mn10200_analyze_prologue will need up
+      update fi->frame before returning or analyzing the register
+      save instructions.
+
+      MY_FRAME_IN_FP: The base of the current frame is in the
+      frame pointer register ($a2).
+
+      CALLER_A2_IN_A0: $a2 from the caller's frame is temporarily
+      in $a0.  This can happen if we're stopped in the prologue.
+
+      NO_MORE_FRAMES: Set this if the current frame is "start" or
+      if the first instruction looks like mov <imm>,sp.  This tells
+      frame chain to not bother trying to unwind past this frame.  */
+
+#define MY_FRAME_IN_SP 0x1
+#define MY_FRAME_IN_FP 0x2
+#define CALLER_A2_IN_A0 0x4
+#define NO_MORE_FRAMES 0x8
+ 
+static CORE_ADDR
+mn10200_analyze_prologue (fi, pc)
+    struct frame_info *fi;
+    CORE_ADDR pc;
+{
+  CORE_ADDR func_addr, func_end, addr, stop;
+  CORE_ADDR stack_size;
+  unsigned char buf[4];
+  int status;
+  char *name;
+  int out_of_line_prologue = 0;
+
+  /* Use the PC in the frame if it's provided to look up the
+     start of this function.  */
+  pc = (fi ? fi->pc : pc);
+
+  /* Find the start of this function.  */
+  status = find_pc_partial_function (pc, &name, &func_addr, &func_end);
+
+  /* Do nothing if we couldn't find the start of this function or if we're
+     stopped at the first instruction in the prologue.  */
+  if (status == 0)
+    return pc;
+
+  /* If we're in start, then give up.  */
+  if (strcmp (name, "start") == 0)
+    {
+      if (fi)
+        fi->status = NO_MORE_FRAMES;
+      return pc;
+    }
+
+  /* At the start of a function our frame is in the stack pointer.  */
+  if (fi)
+    fi->status = MY_FRAME_IN_SP;
+
+  /* If we're physically on an RTS instruction, then our frame has already
+     been deallocated.
+
+     fi->frame is bogus, we need to fix it.  */
+  if (fi && fi->pc + 1 == func_end)
+    {
+      status = target_read_memory (fi->pc, buf, 1);
+      if (status != 0)
+	{
+	  if (fi->next == NULL)
+	    fi->frame = read_sp ();
+	  return fi->pc;
+	}
+
+      if (buf[0] == 0xfe)
+	{
+	  if (fi->next == NULL)
+	    fi->frame = read_sp ();
+	  return fi->pc;
+	}
+    }
+
+  /* Similarly if we're stopped on the first insn of a prologue as our
+     frame hasn't been allocated yet.  */
+  if (fi && fi->pc == func_addr)
+    {
+      if (fi->next == NULL)
+	fi->frame = read_sp ();
+      return fi->pc;
+    }
+
+  /* Figure out where to stop scanning.  */
+  stop = fi ? fi->pc : func_end;
+
+  /* Don't walk off the end of the function.  */
+  stop = stop > func_end ? func_end : stop;
+
+  /* Start scanning on the first instruction of this function.  */
+  addr = func_addr;
+
+  status = target_read_memory (addr, buf, 2);
+  if (status != 0)
+    {
+      if (fi && fi->next == NULL && fi->status & MY_FRAME_IN_SP)
+	fi->frame = read_sp ();
+      return addr;
+    }
+
+  /* First see if this insn sets the stack pointer; if so, it's something
+     we won't understand, so quit now.   */
+  if (buf[0] == 0xdf
+      || (buf[0] == 0xf4 && buf[1] == 0x77))
+    {
+      if (fi)
+	fi->status = NO_MORE_FRAMES;
+      return addr;
+    }
+
+  /* Now see if we have a frame pointer.
+       
+     Search for mov a2,a0 (0xf278)
+        then	mov a3,a2 (0xf27e).  */
+
+  if (buf[0] == 0xf2 && buf[1] == 0x78)
+    {
+      /* Our caller's $a2 will be found in $a0 now.  Note it for
+	 our callers.  */
+      if (fi)
+	fi->status |= CALLER_A2_IN_A0;
+      addr += 2;
+      if (addr >= stop)
+	{
+	  /* We still haven't allocated our local stack.  Handle this
+	     as if we stopped on the first or last insn of a function.   */
+	  if (fi && fi->next == NULL)
+	    fi->frame = read_sp ();
+	  return addr;
+	}
+
+      status = target_read_memory (addr, buf, 2);
+      if (status != 0)
+	{
+	  if (fi && fi->next == NULL)
+	    fi->frame = read_sp ();
+	  return addr;
+	}
+      if (buf[0] == 0xf2 && buf[1] == 0x7e)
+	{
+	  addr += 2;
+
+	  /* Our frame pointer is valid now.  */
+	  if (fi)
+	    {
+	      fi->status |= MY_FRAME_IN_FP;
+	      fi->status &= ~MY_FRAME_IN_SP;
+	    }
+	  if (addr >= stop)
+	    return addr;
+	}
+      else
+	{
+	  if (fi && fi->next == NULL)
+	    fi->frame = read_sp ();
+	  return addr;
+	}
+    }
+
+  /* Next we should allocate the local frame.
+       
+     Search for add imm8,a3 (0xd3XX)
+        or	add imm16,a3 (0xf70bXXXX)
+        or	add imm24,a3 (0xf467XXXXXX).
+       
+     If none of the above was found, then this prologue has
+     no stack, and therefore can't have any register saves,
+     so quit now.  */
+  status = target_read_memory (addr, buf, 2);
+  if (status != 0)
+    {
+      if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	fi->frame = read_sp ();
+      return addr;
+    }
+  if (buf[0] == 0xd3)
+    {
+      stack_size = extract_signed_integer (&buf[1], 1);
+      if (fi)
+	fi->stack_size = stack_size;
+      addr += 2;
+      if (addr >= stop)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    fi->frame = read_sp () - stack_size;
+	  return addr;
+	}
+    }
+  else if (buf[0] == 0xf7 && buf[1] == 0x0b)
+    {
+      status = target_read_memory (addr + 2, buf, 2);
+      if (status != 0)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    fi->frame = read_sp ();
+	  return addr;
+	}
+      stack_size = extract_signed_integer (buf, 2);
+      if (fi)
+	fi->stack_size = stack_size;
+      addr += 4;
+      if (addr >= stop)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    fi->frame = read_sp () - stack_size;
+	  return addr;
+	}
+    }
+  else if (buf[0] == 0xf4 && buf[1] == 0x67)
+    {
+      status = target_read_memory (addr + 2, buf, 3);
+      if (status != 0)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    fi->frame = read_sp ();
+	  return addr;
+	}
+      stack_size = extract_signed_integer (buf, 3);
+      if (fi)
+	fi->stack_size = stack_size;
+      addr += 5;
+      if (addr >= stop)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    fi->frame = read_sp () - stack_size;
+	  return addr;
+	}
+    }
+
+  /* Now see if we have a call to __prologue for an out of line
+     prologue.  */
+  status = target_read_memory (addr, buf, 2);
+  if (status != 0)
+    return addr;
+
+  /* First check for 16bit pc-relative call to __prologue.  */
+  if (buf[0] == 0xfd)
+    {
+      CORE_ADDR temp;
+      status = target_read_memory (addr + 1, buf, 2);
+      if (status != 0)
+	{
+  	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+    	    fi->frame = read_sp ();
+	  return addr;
+	}
+      
+      /* Get the PC this instruction will branch to.  */
+      temp = (extract_signed_integer (buf, 2) + addr + 3) & 0xffffff;
+
+      /* Get the name of the function at the target address.  */
+      status = find_pc_partial_function (temp, &name, NULL, NULL);
+      if (status == 0)
+	{
+  	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+    	    fi->frame = read_sp ();
+	  return addr;
+	}
+
+      /* Note if it is an out of line prologue.  */
+      out_of_line_prologue = (strcmp (name, "__prologue") == 0);
+
+      /* This sucks up 3 bytes of instruction space.  */
+      if (out_of_line_prologue)
+	addr += 3;
+
+      if (addr >= stop)
+	{
+	  if (fi && fi->next == NULL)
+	    {
+	      fi->stack_size -= 16;
+	      fi->frame = read_sp () - fi->stack_size;
+	    }
+	  return addr;
+	}
+    }
+  /* Now check for the 24bit pc-relative call to __prologue.  */
+  else if (buf[0] == 0xf4 && buf[1] == 0xe1)
+    {
+      CORE_ADDR temp;
+      status = target_read_memory (addr + 2, buf, 3);
+      if (status != 0)
+	{
+  	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+    	    fi->frame = read_sp ();
+	  return addr;
+	}
+      
+      /* Get the PC this instruction will branch to.  */
+      temp = (extract_signed_integer (buf, 3) + addr + 5) & 0xffffff;
+
+      /* Get the name of the function at the target address.  */
+      status = find_pc_partial_function (temp, &name, NULL, NULL);
+      if (status == 0)
+	{
+  	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+    	    fi->frame = read_sp ();
+	  return addr;
+	}
+
+      /* Note if it is an out of line prologue.  */
+      out_of_line_prologue = (strcmp (name, "__prologue") == 0);
+
+      /* This sucks up 5 bytes of instruction space.  */
+      if (out_of_line_prologue)
+	addr += 5;
+
+      if (addr >= stop)
+	{
+	  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP))
+	    {
+	      fi->stack_size -= 16;
+	      fi->frame = read_sp () - fi->stack_size;
+	    }
+	  return addr;
+	}
+    }
+
+  /* Now actually handle the out of line prologue.  */
+  if (out_of_line_prologue)
+    {
+      int outgoing_args_size = 0;
+
+      /* First adjust the stack size for this function.  The out of
+	 line prologue saves 4 registers (16bytes of data).  */
+      if (fi)
+	fi->stack_size -= 16;
+
+      /* Update fi->frame if necessary.  */
+      if (fi && fi->next == NULL)
+	fi->frame = read_sp () - fi->stack_size;
+
+      /* After the out of line prologue, there may be another
+	 stack adjustment for the outgoing arguments.
+
+	 Search for add imm8,a3 (0xd3XX)
+	    or	add imm16,a3 (0xf70bXXXX)
+	    or	add imm24,a3 (0xf467XXXXXX).  */
+       
+      status = target_read_memory (addr, buf, 2);
+      if (status != 0)
+	{
+	  if (fi)
+	    {
+	      fi->fsr.regs[2] = fi->frame + fi->stack_size + 4;
+	      fi->fsr.regs[3] = fi->frame + fi->stack_size + 8;
+	      fi->fsr.regs[5] = fi->frame + fi->stack_size + 12;
+	      fi->fsr.regs[6] = fi->frame + fi->stack_size + 16;
+	    }
+	  return addr;
+	}
+
+      if (buf[0] == 0xd3)
+	{
+	  outgoing_args_size = extract_signed_integer (&buf[1], 1);
+	  addr += 2;
+	}
+      else if (buf[0] == 0xf7 && buf[1] == 0x0b)
+	{
+	  status = target_read_memory (addr + 2, buf, 2);
+	  if (status != 0)
+	    {
+	      if (fi)
+		{
+		  fi->fsr.regs[2] = fi->frame + fi->stack_size + 4;
+		  fi->fsr.regs[3] = fi->frame + fi->stack_size + 8;
+		  fi->fsr.regs[5] = fi->frame + fi->stack_size + 12;
+		  fi->fsr.regs[6] = fi->frame + fi->stack_size + 16;
+		}
+	      return addr;
+	    }
+	  outgoing_args_size = extract_signed_integer (buf, 2);
+	  addr += 4;
+	}
+      else if (buf[0] == 0xf4 && buf[1] == 0x67)
+	{
+	  status = target_read_memory (addr + 2, buf, 3);
+	  if (status != 0)
+	    {
+	      if (fi && fi->next == NULL)
+		{
+		  fi->fsr.regs[2] = fi->frame + fi->stack_size + 4;
+		  fi->fsr.regs[3] = fi->frame + fi->stack_size + 8;
+		  fi->fsr.regs[5] = fi->frame + fi->stack_size + 12;
+		  fi->fsr.regs[6] = fi->frame + fi->stack_size + 16;
+		}
+	      return addr;
+	    }
+	  outgoing_args_size = extract_signed_integer (buf, 3);
+	  addr += 5;
+	}
+      else
+	outgoing_args_size = 0;
+
+      /* Now that we know the size of the outgoing arguments, fix
+	 fi->frame again if this is the innermost frame.  */
+      if (fi && fi->next == NULL)
+	fi->frame -= outgoing_args_size;
+
+      /* Note the register save information and update the stack
+	 size for this frame too.  */
+      if (fi)
+	{
+	  fi->fsr.regs[2] = fi->frame + fi->stack_size + 4;
+	  fi->fsr.regs[3] = fi->frame + fi->stack_size + 8;
+	  fi->fsr.regs[5] = fi->frame + fi->stack_size + 12;
+	  fi->fsr.regs[6] = fi->frame + fi->stack_size + 16;
+	  fi->stack_size += outgoing_args_size;
+	}
+      /* There can be no more prologue insns, so return now.  */
+      return addr;
+    }
+
+  /* At this point fi->frame needs to be correct.
+
+     If MY_FRAME_IN_SP is set and we're the innermost frame, then we
+     need to fix fi->frame so that backtracing, find_frame_saved_regs,
+     etc work correctly.  */
+  if (fi && fi->next == NULL && (fi->status & MY_FRAME_IN_SP) != 0)
+    fi->frame = read_sp () - fi->stack_size;
+
+  /* And last we have the register saves.  These are relatively
+     simple because they're physically done off the stack pointer,
+     and thus the number of different instructions we need to
+     check is greatly reduced because we know the displacements
+     will be small.
+       
+     Search for movx d2,(X,a3) (0xf55eXX)
+        then	movx d3,(X,a3) (0xf55fXX)
+        then	mov  a1,(X,a3) (0x5dXX)	   No frame pointer case
+        then	mov  a2,(X,a3) (0x5eXX)	   No frame pointer case
+        or  mov  a0,(X,a3) (0x5cXX)	   Frame pointer case.  */
+
+  status = target_read_memory (addr, buf, 2);
+  if (status != 0)
+    return addr;
+  if (buf[0] == 0xf5 && buf[1] == 0x5e)
+    {
+      if (fi)
+	{
+	  status = target_read_memory (addr + 2, buf, 1);
+	  if (status != 0)
+	    return addr;
+	  fi->fsr.regs[2] = (fi->frame + stack_size
+			     + extract_signed_integer (buf, 1));
+	}
+      addr += 3;
+      if (addr >= stop)
+	return addr;
+      status = target_read_memory (addr, buf, 2);
+      if (status != 0)
+	return addr;
+    }
+  if (buf[0] == 0xf5 && buf[1] == 0x5f)
+    {
+      if (fi)
+	{
+	  status = target_read_memory (addr + 2, buf, 1);
+	  if (status != 0)
+	    return addr;
+	  fi->fsr.regs[3] = (fi->frame + stack_size
+			     + extract_signed_integer (buf, 1));
+	}
+      addr += 3;
+      if (addr >= stop)
+	return addr;
+      status = target_read_memory (addr, buf, 2);
+      if (status != 0)
+	return addr;
+    }
+  if (buf[0] == 0x5d)
+    {
+      if (fi)
+	{
+	  status = target_read_memory (addr + 1, buf, 1);
+	  if (status != 0)
+	    return addr;
+	  fi->fsr.regs[5] = (fi->frame + stack_size
+			     + extract_signed_integer (buf, 1));
+	}
+      addr += 2;
+      if (addr >= stop)
+	return addr;
+      status = target_read_memory (addr, buf, 2);
+      if (status != 0)
+	return addr;
+    }
+  if (buf[0] == 0x5e || buf[0] == 0x5c)
+    {
+      if (fi)
+	{
+	  status = target_read_memory (addr + 1, buf, 1);
+	  if (status != 0)
+	    return addr;
+	  fi->fsr.regs[6] = (fi->frame + stack_size
+			     + extract_signed_integer (buf, 1));
+	  fi->status &= ~CALLER_A2_IN_A0;
+	}
+      addr += 2;
+      if (addr >= stop)
+	return addr;
+      return addr;
+    }
+  return addr;
+}
+  
+/* Function: frame_chain
+   Figure out and return the caller's frame pointer given current
+   frame_info struct.
+
+   We don't handle dummy frames yet but we would probably just return the
+   stack pointer that was in use at the time the function call was made?  */
+
+CORE_ADDR
+mn10200_frame_chain (fi)
+     struct frame_info *fi;
+{
+  struct frame_info dummy_frame;
+
+  /* Walk through the prologue to determine the stack size,
+     location of saved registers, end of the prologue, etc.  */
+  if (fi->status == 0)
+    mn10200_analyze_prologue (fi, (CORE_ADDR)0);
+
+  /* Quit now if mn10200_analyze_prologue set NO_MORE_FRAMES.  */
+  if (fi->status & NO_MORE_FRAMES)
+    return 0;
+
+  /* Now that we've analyzed our prologue, determine the frame
+     pointer for our caller.
+
+       If our caller has a frame pointer, then we need to
+       find the entry value of $a2 to our function.
+
+	 If CALLER_A2_IN_A0, then the chain is in $a0.
+
+	 If fsr.regs[6] is nonzero, then it's at the memory
+	 location pointed to by fsr.regs[6].
+
+	 Else it's still in $a2.
+
+       If our caller does not have a frame pointer, then his
+       frame base is fi->frame + -caller's stack size + 4.  */
+       
+  /* The easiest way to get that info is to analyze our caller's frame.
+
+     So we set up a dummy frame and call mn10200_analyze_prologue to
+     find stuff for us.  */
+  dummy_frame.pc = FRAME_SAVED_PC (fi);
+  dummy_frame.frame = fi->frame;
+  memset (dummy_frame.fsr.regs, '\000', sizeof dummy_frame.fsr.regs);
+  dummy_frame.status = 0;
+  dummy_frame.stack_size = 0;
+  mn10200_analyze_prologue (&dummy_frame);
+
+  if (dummy_frame.status & MY_FRAME_IN_FP)
+    {
+      /* Our caller has a frame pointer.  So find the frame in $a2, $a0,
+	 or in the stack.  */
+      if (fi->fsr.regs[6])
+	return (read_memory_integer (fi->fsr.regs[FP_REGNUM], REGISTER_SIZE)
+		& 0xffffff);
+      else if (fi->status & CALLER_A2_IN_A0)
+	return read_register (4);
+      else
+	return read_register (FP_REGNUM);
+    }
+  else
+    {
+      /* Our caller does not have a frame pointer.  So his frame starts
+	 at the base of our frame (fi->frame) + <his size> + 4 (saved pc).  */
+      return fi->frame + -dummy_frame.stack_size + 4;
+    }
+}
+
+/* Function: skip_prologue
+   Return the address of the first inst past the prologue of the function.  */
+
+CORE_ADDR
+mn10200_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  /* We used to check the debug symbols, but that can lose if
+     we have a null prologue.  */
+  return mn10200_analyze_prologue (NULL, pc);
+}
+
+/* Function: pop_frame
+   This routine gets called when either the user uses the `return'
+   command, or the call dummy breakpoint gets hit.  */
+
+void
+mn10200_pop_frame (frame)
+     struct frame_info *frame;
+{
+  int regnum;
+
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    {
+      write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+
+      /* Restore any saved registers.  */
+      for (regnum = 0; regnum < NUM_REGS; regnum++)
+	if (frame->fsr.regs[regnum] != 0)
+	  {
+	    ULONGEST value;
+
+	    value = read_memory_unsigned_integer (frame->fsr.regs[regnum],
+						  REGISTER_RAW_SIZE (regnum));
+	    write_register (regnum, value);
+	  }
+
+      /* Actually cut back the stack.  */
+      write_register (SP_REGNUM, FRAME_FP (frame));
+
+      /* Don't we need to set the PC?!?  XXX FIXME.  */
+    }
+
+  /* Throw away any cached frame information.  */
+  flush_cached_frames ();
+}
+
+/* Function: push_arguments
+   Setup arguments for a call to the target.  Arguments go in
+   order on the stack.  */
+
+CORE_ADDR
+mn10200_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int argnum = 0;
+  int len = 0;
+  int stack_offset = 0;
+  int regsused = struct_return ? 1 : 0;
+
+  /* This should be a nop, but align the stack just in case something
+     went wrong.  Stacks are two byte aligned on the mn10200.  */
+  sp &= ~1;
+
+  /* Now make space on the stack for the args.
+
+     XXX This doesn't appear to handle pass-by-invisible reference
+     arguments.  */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      int arg_length = (TYPE_LENGTH (VALUE_TYPE (args[argnum])) + 1) & ~1;
+
+      /* If we've used all argument registers, then this argument is
+	 pushed.  */
+      if (regsused >= 2 || arg_length > 4)
+	{
+	  regsused = 2;
+	  len += arg_length;
+	}
+      /* We know we've got some arg register space left.  If this argument
+	 will fit entirely in regs, then put it there.  */
+      else if (arg_length <= 2
+	       || TYPE_CODE (VALUE_TYPE (args[argnum])) == TYPE_CODE_PTR) 
+	{
+	  regsused++;
+	}
+      else if (regsused == 0)
+	{
+	  regsused = 2;
+	}
+      else
+	{
+	  regsused = 2;
+	  len += arg_length;
+	}
+    }
+
+  /* Allocate stack space.  */
+  sp -= len;
+
+  regsused = struct_return ? 1 : 0;
+  /* Push all arguments onto the stack. */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      int len;
+      char *val;
+
+      /* XXX Check this.  What about UNIONS?  */
+      if (TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_STRUCT
+	  && TYPE_LENGTH (VALUE_TYPE (*args)) > 8)
+	{
+	  /* XXX Wrong, we want a pointer to this argument.  */
+          len = TYPE_LENGTH (VALUE_TYPE (*args));
+          val = (char *)VALUE_CONTENTS (*args);
+	}
+      else
+	{
+	  len = TYPE_LENGTH (VALUE_TYPE (*args));
+	  val = (char *)VALUE_CONTENTS (*args);
+	}
+
+      if (regsused < 2
+	  && (len <= 2
+	      || TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_PTR))
+	{
+	  write_register (regsused, extract_unsigned_integer (val, 4));
+	  regsused++;
+	}
+      else if (regsused == 0 && len == 4)
+	{
+	  write_register (regsused, extract_unsigned_integer (val, 2));
+	  write_register (regsused + 1, extract_unsigned_integer (val + 2, 2));
+	  regsused = 2;
+	}
+      else
+	{
+	  regsused = 2;
+	  while (len > 0)
+	    {
+	      write_memory (sp + stack_offset, val, 2);
+
+	      len -= 2;
+	      val += 2;
+	      stack_offset += 2;
+	    }
+	}
+      args++;
+    }
+
+  return sp;
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Needed for targets where we don't actually execute a JSR/BSR instruction */
+ 
+CORE_ADDR
+mn10200_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  unsigned char buf[4];
+
+  store_unsigned_integer (buf, 4, CALL_DUMMY_ADDRESS ());
+  write_memory (sp - 4, buf, 4);
+  return sp - 4;
+}
+
+/* Function: store_struct_return (addr,sp)
+   Store the structure value return address for an inferior function
+   call.  */
+ 
+CORE_ADDR
+mn10200_store_struct_return (addr, sp)
+     CORE_ADDR addr;
+     CORE_ADDR sp;
+{
+  /* The structure return address is passed as the first argument.  */
+  write_register (0, addr);
+  return sp;
+}
+ 
+/* Function: frame_saved_pc 
+   Find the caller of this frame.  We do this by seeing if RP_REGNUM
+   is saved in the stack anywhere, otherwise we get it from the
+   registers.  If the inner frame is a dummy frame, return its PC
+   instead of RP, because that's where "caller" of the dummy-frame
+   will be found.  */
+
+CORE_ADDR
+mn10200_frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  /* The saved PC will always be at the base of the current frame.  */
+  return (read_memory_integer (fi->frame, REGISTER_SIZE) & 0xffffff);
+}
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+/* Function: init_extra_frame_info
+   Setup the frame's frame pointer, pc, and frame addresses for saved
+   registers.  Most of the work is done in mn10200_analyze_prologue().
+
+   Note that when we are called for the last frame (currently active frame),
+   that fi->pc and fi->frame will already be setup.  However, fi->frame will
+   be valid only if this routine uses FP.  For previous frames, fi-frame will
+   always be correct.  mn10200_analyze_prologue will fix fi->frame if
+   it's not valid.
+
+   We can be called with the PC in the call dummy under two circumstances.
+   First, during normal backtracing, second, while figuring out the frame
+   pointer just prior to calling the target function (see run_stack_dummy).  */
+
+void
+mn10200_init_extra_frame_info (fi)
+     struct frame_info *fi;
+{
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+  fi->status = 0;
+  fi->stack_size = 0;
+
+  mn10200_analyze_prologue (fi, 0);
+}
+
+void
+_initialize_mn10200_tdep ()
+{
+  tm_print_insn = print_insn_mn10200;
+}
+
diff --git a/gdb/mn10300-tdep.c b/gdb/mn10300-tdep.c
new file mode 100644
index 0000000..6c43176
--- /dev/null
+++ b/gdb/mn10300-tdep.c
@@ -0,0 +1,791 @@
+/* Target-dependent code for the Matsushita MN10300 for GDB, the GNU debugger.
+   Copyright 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+#include "symfile.h"
+
+static char *mn10300_generic_register_names[] = 
+{ "d0", "d1", "d2", "d3", "a0", "a1", "a2", "a3",
+  "sp", "pc", "mdr", "psw", "lir", "lar", "", "",
+  "", "", "", "", "", "", "", "",
+  "", "", "", "", "", "", "", "fp" };
+
+char **mn10300_register_names = mn10300_generic_register_names;
+
+static CORE_ADDR mn10300_analyze_prologue PARAMS ((struct frame_info *fi,
+						  CORE_ADDR pc));
+
+/* Additional info used by the frame */
+
+struct frame_extra_info
+{
+  int status;
+  int stack_size;
+};
+
+static struct frame_info *analyze_dummy_frame PARAMS ((CORE_ADDR, CORE_ADDR));
+static struct frame_info *
+analyze_dummy_frame (pc, frame)
+     CORE_ADDR pc;
+     CORE_ADDR frame;
+{
+  static struct frame_info *dummy = NULL;
+  if (dummy == NULL)
+    {
+      dummy = xmalloc (sizeof (struct frame_info));
+      dummy->saved_regs = xmalloc (SIZEOF_FRAME_SAVED_REGS);
+      dummy->extra_info = xmalloc (sizeof (struct frame_extra_info));
+    }
+  dummy->next = NULL;
+  dummy->prev = NULL;
+  dummy->pc = pc;
+  dummy->frame = frame;
+  dummy->extra_info->status = 0;
+  dummy->extra_info->stack_size = 0;
+  memset (dummy->saved_regs, '\000', SIZEOF_FRAME_SAVED_REGS);
+  mn10300_analyze_prologue (dummy, 0);
+  return dummy;
+}
+
+/* Values for frame_info.status */
+
+#define MY_FRAME_IN_SP 0x1
+#define MY_FRAME_IN_FP 0x2
+#define NO_MORE_FRAMES 0x4
+
+
+/* Should call_function allocate stack space for a struct return?  */
+int
+mn10300_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_NFIELDS (type) > 1 || TYPE_LENGTH (type) > 8);
+}
+
+/* The breakpoint instruction must be the same size as the smallest
+   instruction in the instruction set.
+
+   The Matsushita mn10x00 processors have single byte instructions
+   so we need a single byte breakpoint.  Matsushita hasn't defined
+   one, so we defined it ourselves.  */
+
+unsigned char *
+mn10300_breakpoint_from_pc (bp_addr, bp_size)
+     CORE_ADDR *bp_addr;
+     int *bp_size;
+{
+  static char breakpoint[] = {0xff};
+  *bp_size = 1;
+  return breakpoint;
+}
+
+
+/* Fix fi->frame if it's bogus at this point.  This is a helper
+   function for mn10300_analyze_prologue. */
+
+static void
+fix_frame_pointer (fi, stack_size)
+    struct frame_info *fi;
+    int stack_size;
+{
+  if (fi && fi->next == NULL)
+    {
+      if (fi->extra_info->status & MY_FRAME_IN_SP)
+	fi->frame = read_sp () - stack_size;
+      else if (fi->extra_info->status & MY_FRAME_IN_FP)
+	fi->frame = read_register (A3_REGNUM);
+    }
+}
+
+
+/* Set offsets of registers saved by movm instruction.
+   This is a helper function for mn10300_analyze_prologue.  */
+
+static void
+set_movm_offsets (fi, movm_args)
+    struct frame_info *fi;
+    int movm_args;
+{
+  int offset = 0;
+
+  if (fi == NULL || movm_args == 0)
+    return;
+
+  if (movm_args & 0x10)
+    {
+      fi->saved_regs[A3_REGNUM] = fi->frame + offset;
+      offset += 4;
+    }
+  if (movm_args & 0x20)
+    {
+      fi->saved_regs[A2_REGNUM] = fi->frame + offset;
+      offset += 4;
+    }
+  if (movm_args & 0x40)
+    {
+      fi->saved_regs[D3_REGNUM] = fi->frame + offset;
+      offset += 4;
+    }
+  if (movm_args & 0x80)
+    {
+      fi->saved_regs[D2_REGNUM] = fi->frame + offset;
+      offset += 4;
+    }
+}
+
+
+/* The main purpose of this file is dealing with prologues to extract
+   information about stack frames and saved registers.
+
+   For reference here's how prologues look on the mn10300:
+
+     With frame pointer:
+	movm [d2,d3,a2,a3],sp
+	mov sp,a3
+	add <size>,sp
+
+     Without frame pointer:
+	movm [d2,d3,a2,a3],sp (if needed)
+        add <size>,sp
+
+   One day we might keep the stack pointer constant, that won't
+   change the code for prologues, but it will make the frame
+   pointerless case much more common.  */
+	
+/* Analyze the prologue to determine where registers are saved,
+   the end of the prologue, etc etc.  Return the end of the prologue
+   scanned.
+
+   We store into FI (if non-null) several tidbits of information:
+
+    * stack_size -- size of this stack frame.  Note that if we stop in
+    certain parts of the prologue/epilogue we may claim the size of the
+    current frame is zero.  This happens when the current frame has
+    not been allocated yet or has already been deallocated.
+
+    * fsr -- Addresses of registers saved in the stack by this frame.
+
+    * status -- A (relatively) generic status indicator.  It's a bitmask
+    with the following bits: 
+
+      MY_FRAME_IN_SP: The base of the current frame is actually in
+      the stack pointer.  This can happen for frame pointerless
+      functions, or cases where we're stopped in the prologue/epilogue
+      itself.  For these cases mn10300_analyze_prologue will need up
+      update fi->frame before returning or analyzing the register
+      save instructions.
+
+      MY_FRAME_IN_FP: The base of the current frame is in the
+      frame pointer register ($a2).
+
+      NO_MORE_FRAMES: Set this if the current frame is "start" or
+      if the first instruction looks like mov <imm>,sp.  This tells
+      frame chain to not bother trying to unwind past this frame.  */
+
+static CORE_ADDR
+mn10300_analyze_prologue (fi, pc)
+    struct frame_info *fi;
+    CORE_ADDR pc;
+{
+  CORE_ADDR func_addr, func_end, addr, stop;
+  CORE_ADDR stack_size;
+  int imm_size;
+  unsigned char buf[4];
+  int status, movm_args = 0;
+  char *name;
+
+  /* Use the PC in the frame if it's provided to look up the
+     start of this function.  */
+  pc = (fi ? fi->pc : pc);
+
+  /* Find the start of this function.  */
+  status = find_pc_partial_function (pc, &name, &func_addr, &func_end);
+
+  /* Do nothing if we couldn't find the start of this function or if we're
+     stopped at the first instruction in the prologue.  */
+  if (status == 0)
+    return pc;
+
+  /* If we're in start, then give up.  */
+  if (strcmp (name, "start") == 0)
+    {
+      if (fi != NULL)
+	fi->extra_info->status = NO_MORE_FRAMES;
+      return pc;
+    }
+
+  /* At the start of a function our frame is in the stack pointer.  */
+  if (fi)
+    fi->extra_info->status = MY_FRAME_IN_SP;
+
+  /* Get the next two bytes into buf, we need two because rets is a two
+     byte insn and the first isn't enough to uniquely identify it.  */
+  status = read_memory_nobpt (pc, buf, 2);
+  if (status != 0)
+    return pc;
+
+  /* If we're physically on an "rets" instruction, then our frame has
+     already been deallocated.  Note this can also be true for retf
+     and ret if they specify a size of zero.
+
+     In this case fi->frame is bogus, we need to fix it.  */
+  if (fi && buf[0] == 0xf0 && buf[1] == 0xfc)
+    {
+      if (fi->next == NULL)
+	fi->frame = read_sp ();
+      return fi->pc;
+    }
+
+  /* Similarly if we're stopped on the first insn of a prologue as our
+     frame hasn't been allocated yet.  */
+  if (fi && fi->pc == func_addr)
+    {
+      if (fi->next == NULL)
+	fi->frame = read_sp ();
+      return fi->pc;
+    }
+
+  /* Figure out where to stop scanning.  */
+  stop = fi ? fi->pc : func_end;
+
+  /* Don't walk off the end of the function.  */
+  stop = stop > func_end ? func_end : stop;
+
+  /* Start scanning on the first instruction of this function.  */
+  addr = func_addr;
+
+  /* Suck in two bytes.  */
+  status = read_memory_nobpt (addr, buf, 2);
+  if (status != 0)
+    {
+      fix_frame_pointer (fi, 0);
+      return addr;
+    }
+
+  /* First see if this insn sets the stack pointer; if so, it's something
+     we won't understand, so quit now.   */
+  if (buf[0] == 0xf2 && (buf[1] & 0xf3) == 0xf0)
+    {
+      if (fi)
+	fi->extra_info->status = NO_MORE_FRAMES;
+      return addr;
+    }
+
+  /* Now look for movm [regs],sp, which saves the callee saved registers.
+
+     At this time we don't know if fi->frame is valid, so we only note
+     that we encountered a movm instruction.  Later, we'll set the entries
+     in fsr.regs as needed.  */
+  if (buf[0] == 0xcf)
+    {
+      /* Extract the register list for the movm instruction.  */
+      status = read_memory_nobpt (addr + 1, buf, 1);
+      movm_args = *buf;
+
+      addr += 2;
+
+      /* Quit now if we're beyond the stop point.  */
+      if (addr >= stop)
+	{
+	  /* Fix fi->frame since it's bogus at this point.  */
+	  if (fi && fi->next == NULL)
+	    fi->frame = read_sp ();
+
+	  /* Note if/where callee saved registers were saved.  */
+	  set_movm_offsets (fi, movm_args);
+	  return addr;
+	}
+
+      /* Get the next two bytes so the prologue scan can continue.  */
+      status = read_memory_nobpt (addr, buf, 2);
+      if (status != 0)
+	{
+	  /* Fix fi->frame since it's bogus at this point.  */
+	  if (fi && fi->next == NULL)
+	    fi->frame = read_sp ();
+
+	  /* Note if/where callee saved registers were saved.  */
+	  set_movm_offsets (fi, movm_args);
+	  return addr;
+	}
+    }
+
+  /* Now see if we set up a frame pointer via "mov sp,a3" */
+  if (buf[0] == 0x3f)
+    {
+      addr += 1;
+
+      /* The frame pointer is now valid.  */
+      if (fi)
+	{
+	  fi->extra_info->status |= MY_FRAME_IN_FP;
+	  fi->extra_info->status &= ~MY_FRAME_IN_SP;
+	}
+
+      /* Quit now if we're beyond the stop point.  */
+      if (addr >= stop)
+	{
+	  /* Fix fi->frame if it's bogus at this point.  */
+	  fix_frame_pointer (fi, 0);
+
+	  /* Note if/where callee saved registers were saved.  */
+	  set_movm_offsets (fi, movm_args);
+	  return addr;
+	}
+
+      /* Get two more bytes so scanning can continue.  */
+      status = read_memory_nobpt (addr, buf, 2);
+      if (status != 0)
+	{
+	  /* Fix fi->frame if it's bogus at this point.  */
+	  fix_frame_pointer (fi, 0);
+
+	  /* Note if/where callee saved registers were saved.  */
+	  set_movm_offsets (fi, movm_args);
+	  return addr;
+	}
+    }
+  
+  /* Next we should allocate the local frame.  No more prologue insns
+     are found after allocating the local frame.
+       
+     Search for add imm8,sp (0xf8feXX)
+        or	add imm16,sp (0xfafeXXXX)
+        or	add imm32,sp (0xfcfeXXXXXXXX).
+       
+     If none of the above was found, then this prologue has no 
+     additional stack.  */
+
+  status = read_memory_nobpt (addr, buf, 2);
+  if (status != 0)
+    {
+      /* Fix fi->frame if it's bogus at this point.  */
+      fix_frame_pointer (fi, 0);
+
+      /* Note if/where callee saved registers were saved.  */
+      set_movm_offsets (fi, movm_args);
+      return addr;
+    }
+
+  imm_size = 0;
+  if (buf[0] == 0xf8 && buf[1] == 0xfe)
+    imm_size = 1;
+  else if (buf[0] == 0xfa && buf[1] == 0xfe)
+    imm_size = 2;
+  else if (buf[0] == 0xfc && buf[1] == 0xfe)
+    imm_size = 4;
+
+  if (imm_size != 0)
+    {
+      /* Suck in imm_size more bytes, they'll hold the size of the
+         current frame.  */
+      status = read_memory_nobpt (addr + 2, buf, imm_size);
+      if (status != 0)
+	{
+	  /* Fix fi->frame if it's bogus at this point.  */
+	  fix_frame_pointer (fi, 0);
+
+	  /* Note if/where callee saved registers were saved.  */
+	  set_movm_offsets (fi, movm_args);
+	  return addr;
+	}
+
+      /* Note the size of the stack in the frame info structure.  */
+      stack_size = extract_signed_integer (buf, imm_size);
+      if (fi)
+	fi->extra_info->stack_size = stack_size;
+
+      /* We just consumed 2 + imm_size bytes.  */
+      addr += 2 + imm_size;
+
+      /* No more prologue insns follow, so begin preparation to return.  */
+      /* Fix fi->frame if it's bogus at this point.  */
+      fix_frame_pointer (fi, stack_size);
+
+      /* Note if/where callee saved registers were saved.  */
+      set_movm_offsets (fi, movm_args);
+      return addr;
+    }
+
+  /* We never found an insn which allocates local stack space, regardless
+     this is the end of the prologue.  */
+  /* Fix fi->frame if it's bogus at this point.  */
+  fix_frame_pointer (fi, 0);
+
+  /* Note if/where callee saved registers were saved.  */
+  set_movm_offsets (fi, movm_args);
+  return addr;
+}
+  
+/* Function: frame_chain
+   Figure out and return the caller's frame pointer given current
+   frame_info struct.
+
+   We don't handle dummy frames yet but we would probably just return the
+   stack pointer that was in use at the time the function call was made?  */
+
+CORE_ADDR
+mn10300_frame_chain (fi)
+     struct frame_info *fi;
+{
+  struct frame_info *dummy;
+  /* Walk through the prologue to determine the stack size,
+     location of saved registers, end of the prologue, etc.  */
+  if (fi->extra_info->status == 0)
+    mn10300_analyze_prologue (fi, (CORE_ADDR)0);
+
+  /* Quit now if mn10300_analyze_prologue set NO_MORE_FRAMES.  */
+  if (fi->extra_info->status & NO_MORE_FRAMES)
+    return 0;
+
+  /* Now that we've analyzed our prologue, determine the frame
+     pointer for our caller.
+
+       If our caller has a frame pointer, then we need to
+       find the entry value of $a3 to our function.
+
+	 If fsr.regs[A3_REGNUM] is nonzero, then it's at the memory
+	 location pointed to by fsr.regs[A3_REGNUM].
+
+	 Else it's still in $a3.
+
+       If our caller does not have a frame pointer, then his
+       frame base is fi->frame + -caller's stack size.  */
+       
+  /* The easiest way to get that info is to analyze our caller's frame.
+     So we set up a dummy frame and call mn10300_analyze_prologue to
+     find stuff for us.  */
+  dummy = analyze_dummy_frame (FRAME_SAVED_PC (fi), fi->frame);
+
+  if (dummy->extra_info->status & MY_FRAME_IN_FP)
+    {
+      /* Our caller has a frame pointer.  So find the frame in $a3 or
+         in the stack.  */
+      if (fi->saved_regs[A3_REGNUM])
+	return (read_memory_integer (fi->saved_regs[A3_REGNUM], REGISTER_SIZE));
+      else
+	return read_register (A3_REGNUM);
+    }
+  else
+    {
+      int adjust = 0;
+
+      adjust += (fi->saved_regs[D2_REGNUM] ? 4 : 0);
+      adjust += (fi->saved_regs[D3_REGNUM] ? 4 : 0);
+      adjust += (fi->saved_regs[A2_REGNUM] ? 4 : 0);
+      adjust += (fi->saved_regs[A3_REGNUM] ? 4 : 0);
+
+      /* Our caller does not have a frame pointer.  So his frame starts
+	 at the base of our frame (fi->frame) + register save space
+	 + <his size>.  */
+      return fi->frame + adjust + -dummy->extra_info->stack_size;
+    }
+}
+
+/* Function: skip_prologue
+   Return the address of the first inst past the prologue of the function.  */
+
+CORE_ADDR
+mn10300_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  /* We used to check the debug symbols, but that can lose if
+     we have a null prologue.  */
+  return mn10300_analyze_prologue (NULL, pc);
+}
+
+
+/* Function: pop_frame
+   This routine gets called when either the user uses the `return'
+   command, or the call dummy breakpoint gets hit.  */
+
+void
+mn10300_pop_frame (frame)
+     struct frame_info *frame;
+{
+  int regnum;
+
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    {
+      write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+
+      /* Restore any saved registers.  */
+      for (regnum = 0; regnum < NUM_REGS; regnum++)
+	if (frame->saved_regs[regnum] != 0)
+	  {
+	    ULONGEST value;
+
+	    value = read_memory_unsigned_integer (frame->saved_regs[regnum],
+						  REGISTER_RAW_SIZE (regnum));
+	    write_register (regnum, value);
+	  }
+
+      /* Actually cut back the stack.  */
+      write_register (SP_REGNUM, FRAME_FP (frame));
+
+      /* Don't we need to set the PC?!?  XXX FIXME.  */
+    }
+
+  /* Throw away any cached frame information.  */
+  flush_cached_frames ();
+}
+
+/* Function: push_arguments
+   Setup arguments for a call to the target.  Arguments go in
+   order on the stack.  */
+
+CORE_ADDR
+mn10300_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int argnum = 0;
+  int len = 0;
+  int stack_offset = 0;
+  int regsused = struct_return ? 1 : 0;
+
+  /* This should be a nop, but align the stack just in case something
+     went wrong.  Stacks are four byte aligned on the mn10300.  */
+  sp &= ~3;
+
+  /* Now make space on the stack for the args.
+
+     XXX This doesn't appear to handle pass-by-invisible reference
+     arguments.  */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      int arg_length = (TYPE_LENGTH (VALUE_TYPE (args[argnum])) + 3) & ~3;
+
+      while (regsused < 2 && arg_length > 0)
+	{
+	  regsused++;
+	  arg_length -= 4;
+	}
+      len += arg_length;
+    }
+
+  /* Allocate stack space.  */
+  sp -= len;
+
+  regsused = struct_return ? 1 : 0;
+  /* Push all arguments onto the stack. */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      int len;
+      char *val;
+
+      /* XXX Check this.  What about UNIONS?  */
+      if (TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_STRUCT
+	  && TYPE_LENGTH (VALUE_TYPE (*args)) > 8)
+	{
+	  /* XXX Wrong, we want a pointer to this argument.  */
+          len = TYPE_LENGTH (VALUE_TYPE (*args));
+          val = (char *)VALUE_CONTENTS (*args);
+	}
+      else
+	{
+	  len = TYPE_LENGTH (VALUE_TYPE (*args));
+	  val = (char *)VALUE_CONTENTS (*args);
+	}
+
+      while (regsused < 2 && len > 0)
+	{
+	  write_register (regsused, extract_unsigned_integer (val, 4));
+	  val += 4;
+	  len -= 4;
+	  regsused++;
+	}
+
+      while (len > 0)
+	{
+	  write_memory (sp + stack_offset, val, 4);
+	  len -= 4;
+	  val += 4;
+	  stack_offset += 4;
+	}
+
+      args++;
+    }
+
+  /* Make space for the flushback area.  */
+  sp -= 8;
+  return sp;
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Needed for targets where we don't actually execute a JSR/BSR instruction */
+ 
+CORE_ADDR
+mn10300_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  unsigned char buf[4];
+
+  store_unsigned_integer (buf, 4, CALL_DUMMY_ADDRESS ());
+  write_memory (sp - 4, buf, 4);
+  return sp - 4;
+}
+
+/* Function: store_struct_return (addr,sp)
+   Store the structure value return address for an inferior function
+   call.  */
+ 
+CORE_ADDR
+mn10300_store_struct_return (addr, sp)
+     CORE_ADDR addr;
+     CORE_ADDR sp;
+{
+  /* The structure return address is passed as the first argument.  */
+  write_register (0, addr);
+  return sp;
+}
+ 
+/* Function: frame_saved_pc 
+   Find the caller of this frame.  We do this by seeing if RP_REGNUM
+   is saved in the stack anywhere, otherwise we get it from the
+   registers.  If the inner frame is a dummy frame, return its PC
+   instead of RP, because that's where "caller" of the dummy-frame
+   will be found.  */
+
+CORE_ADDR
+mn10300_frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  int adjust = 0;
+
+  adjust += (fi->saved_regs[D2_REGNUM] ? 4 : 0);
+  adjust += (fi->saved_regs[D3_REGNUM] ? 4 : 0);
+  adjust += (fi->saved_regs[A2_REGNUM] ? 4 : 0);
+  adjust += (fi->saved_regs[A3_REGNUM] ? 4 : 0);
+
+  return (read_memory_integer (fi->frame + adjust, REGISTER_SIZE));
+}
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+/* Function: mn10300_init_extra_frame_info
+   Setup the frame's frame pointer, pc, and frame addresses for saved
+   registers.  Most of the work is done in mn10300_analyze_prologue().
+
+   Note that when we are called for the last frame (currently active frame),
+   that fi->pc and fi->frame will already be setup.  However, fi->frame will
+   be valid only if this routine uses FP.  For previous frames, fi-frame will
+   always be correct.  mn10300_analyze_prologue will fix fi->frame if
+   it's not valid.
+
+   We can be called with the PC in the call dummy under two circumstances.
+   First, during normal backtracing, second, while figuring out the frame
+   pointer just prior to calling the target function (see run_stack_dummy).  */
+
+void
+mn10300_init_extra_frame_info (fi)
+     struct frame_info *fi;
+{
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  frame_saved_regs_zalloc (fi);
+  fi->extra_info = (struct frame_extra_info *)
+    frame_obstack_alloc (sizeof (struct frame_extra_info));
+
+  fi->extra_info->status = 0;
+  fi->extra_info->stack_size = 0;
+
+  mn10300_analyze_prologue (fi, 0);
+}
+
+/* Function: mn10300_virtual_frame_pointer
+   Return the register that the function uses for a frame pointer, 
+   plus any necessary offset to be applied to the register before
+   any frame pointer offsets.  */
+
+void
+mn10300_virtual_frame_pointer (pc, reg, offset)
+     CORE_ADDR pc;
+     long *reg;
+     long *offset;
+{
+  struct frame_info *dummy = analyze_dummy_frame (pc, 0);
+  /* Set up a dummy frame_info, Analyze the prolog and fill in the
+     extra info.  */
+  /* Results will tell us which type of frame it uses.  */
+  if (dummy->extra_info->status & MY_FRAME_IN_SP)
+    {
+      *reg    = SP_REGNUM;
+      *offset = -(dummy->extra_info->stack_size);
+    }
+  else
+    {
+      *reg    = A3_REGNUM;
+      *offset = 0;
+    }
+}
+  
+/* This can be made more generic later.  */
+static void
+set_machine_hook (filename)
+     char *filename;
+{
+  int i;
+
+  if (bfd_get_mach (exec_bfd) == bfd_mach_mn10300
+      || bfd_get_mach (exec_bfd) == 0)
+    {
+      mn10300_register_names = mn10300_generic_register_names;
+    }
+
+}
+
+void
+_initialize_mn10300_tdep ()
+{
+/*  printf("_initialize_mn10300_tdep\n"); */
+
+  tm_print_insn = print_insn_mn10300;
+
+  specify_exec_file_hook (set_machine_hook);
+}
+
diff --git a/gdb/mon960-rom.c b/gdb/mon960-rom.c
new file mode 100644
index 0000000..32dcaff
--- /dev/null
+++ b/gdb/mon960-rom.c
@@ -0,0 +1,264 @@
+/* Remote target glue for the Intel 960 MON960 ROM monitor.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "srec.h"
+#include "xmodem.h"
+#include "symtab.h"
+#include "symfile.h" /* for generic_load */
+
+
+#define USE_GENERIC_LOAD
+
+static struct target_ops mon960_ops;
+
+static void mon960_open PARAMS ((char *args, int from_tty));
+
+#ifdef USE_GENERIC_LOAD
+
+static void
+mon960_load_gen (filename, from_tty) 
+    char *filename;
+    int from_tty;
+{
+  extern int inferior_pid;
+
+  generic_load (filename, from_tty);
+  /* Finally, make the PC point at the start address */
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;             /* No process now */
+}
+
+#else
+
+static void
+mon960_load (desc, file, hashmark)
+     serial_t desc;
+     char *file;
+     int hashmark;
+{
+  bfd *abfd;
+  asection *s;
+  char *buffer;
+  int i;
+
+  buffer = alloca (XMODEM_PACKETSIZE);
+  abfd = bfd_openr (file, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", file);
+      return;
+    }
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	bfd_size_type section_size;
+	printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma,
+			 s->vma + s->_raw_size);
+	gdb_flush (gdb_stdout);
+	monitor_printf (current_monitor->load, s->vma);
+	if (current_monitor->loadresp)
+	  monitor_expect (current_monitor->loadresp, NULL, 0);
+	xmodem_init_xfer (desc);
+	section_size = bfd_section_size (abfd, s);
+	for (i = 0; i < section_size; i += XMODEM_DATASIZE)
+	  {
+	    int numbytes;
+	    numbytes = min (XMODEM_DATASIZE, section_size - i);
+	    bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i,
+				      numbytes);
+	    xmodem_send_packet (desc, buffer, numbytes, hashmark);
+	    if (hashmark)
+	      {
+		putchar_unfiltered ('#');
+		gdb_flush (gdb_stdout);
+	      }
+	  }			/* Per-packet (or S-record) loop */
+	xmodem_finish_xfer (desc);
+	monitor_expect_prompt (NULL, 0);
+	putchar_unfiltered ('\n');
+      }				/* Loadable sections */
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+}
+
+#endif /* USE_GENERIC_LOAD */
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+/* these correspond to the offsets from tm-* files from config directories */
+/* g0-g14, fp, pfp, sp, rip,r3-15, pc, ac, tc, fp0-3 */ 
+/* NOTE: "ip" is documented as "ir" in the Mon960 UG. */
+/* NOTE: "ir" can't be accessed... but there's an ip and rip. */
+static char *full_regnames[NUM_REGS] = {
+  /*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7",
+  /*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",
+  /* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7",
+  /* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp",
+  /* 32 */ "pc",  "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",
+  };
+
+static char *mon960_regnames[NUM_REGS];
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+/* need to pause the monitor for timing reasons, so slow it down */
+
+#if 0
+/* FIXME: this extremely long init string causes MON960 to return two NAKS
+   instead of performing the autobaud recognition, at least when gdb
+   is running on GNU/Linux.  The short string below works on Linux, and on
+   SunOS using a tcp serial connection.  Must retest on SunOS using a
+   direct serial connection; if that works, get rid of the long string. */
+static char *mon960_inits[] = {"\n\r\r\r\r\r\r\r\r\r\r\r\r\r\r\n\r\n\r\n", NULL};
+#else
+static char *mon960_inits[] = { "\r", NULL};
+#endif
+
+static struct monitor_ops mon960_cmds ;
+
+static void 
+init_mon960_cmds (void)
+{
+  mon960_cmds.flags =   MO_CLR_BREAK_USES_ADDR
+    | MO_NO_ECHO_ON_OPEN   | MO_SEND_BREAK_ON_STOP   | MO_GETMEM_READ_SINGLE ;    /* flags */
+  mon960_cmds.init =   mon960_inits;	/* Init strings */
+  mon960_cmds.cont =   "go\n\r";	/* continue command */
+  mon960_cmds.step =   "st\n\r";		/* single step */
+  mon960_cmds.stop =   NULL;			/* break interrupts the program */
+  mon960_cmds.set_break =   NULL;		/* set a breakpoint */
+  mon960_cmds.clr_break = 			/* can't use "br" because only 2 hw bps are supported */
+    mon960_cmds.clr_all_break =   NULL;		/* clear a breakpoint - "de" is for hw bps */
+  NULL,				/* clear all breakpoints */
+    mon960_cmds.fill =   NULL;			/* fill (start end val) */
+  /* can't use "fi" because it takes words, not bytes */
+  /* can't use "mb", "md" or "mo" because they require interaction */
+  mon960_cmds.setmem.cmdb =     NULL;		/* setmem.cmdb (addr, value) */
+  mon960_cmds.setmem.cmdw =     NULL;		/* setmem.cmdw (addr, value) */
+  mon960_cmds.setmem.cmdl =     "md %x %x\n\r";	/* setmem.cmdl (addr, value) */
+  mon960_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  mon960_cmds.setmem.resp_delim =     NULL;	/* setmem.resp_delim */
+  mon960_cmds.setmem.term =     NULL;		/* setmem.term */
+  mon960_cmds.setmem.term_cmd =     NULL;			/* setmem.term_cmd */
+  /* since the parsing of multiple bytes is difficult due to
+     interspersed addresses, we'll only read 1 value at a time,
+     even tho these can handle a count */
+  mon960_cmds.getmem.cmdb =     "db %x\n\r";	/* getmem.cmdb (addr, #bytes) */
+  mon960_cmds.getmem.cmdw =     "ds %x\n\r";	/* getmem.cmdw (addr, #swords) */
+  mon960_cmds.getmem.cmdl =     "di %x\n\r";	/* getmem.cmdl (addr, #words) */
+  mon960_cmds.getmem.cmdll =     "dd %x\n\r";	/* getmem.cmdll (addr, #dwords) */
+  mon960_cmds.getmem.resp_delim =     " : ";	/* getmem.resp_delim */
+  mon960_cmds.getmem.term =     NULL;		/* getmem.term */
+  mon960_cmds.getmem.term_cmd =     NULL;	/* getmem.term_cmd */
+  mon960_cmds.setreg.cmd =     "md %s %x\n\r";	/* setreg.cmd (name, value) */
+  mon960_cmds.setreg.resp_delim =     NULL;	/* setreg.resp_delim */
+  mon960_cmds.setreg.term =     NULL;		/* setreg.term */
+  mon960_cmds.setreg.term_cmd =     NULL,	/* setreg.term_cmd */
+    mon960_cmds.getreg.cmd =     "di %s\n\r";	/* getreg.cmd (name) */
+  mon960_cmds.getreg.resp_delim =     " : ";	/* getreg.resp_delim */
+  mon960_cmds.getreg.term =     NULL;		/* getreg.term */
+  mon960_cmds.getreg.term_cmd =     NULL;	/* getreg.term_cmd */
+  mon960_cmds.dump_registers =   "re\n\r";	/* dump_registers */
+  mon960_cmds.register_pattern =   "\\(\\w+\\)=\\([0-9a-fA-F]+\\)";	/* register_pattern */
+  mon960_cmds.supply_register =   NULL;		/* supply_register */
+#ifdef USE_GENERIC_LOAD
+  mon960_cmds.load_routine =   NULL;		/* load_routine (defaults to SRECs) */
+  mon960_cmds.load = NULL;			/* download command */
+  mon960_cmds.loadresp  = NULL;			/* load response */
+#else
+  mon960_cmds.load_routine =   mon960_load ;	/* load_routine (defaults to SRECs) */
+  mon960_cmds.load =  "do\n\r";		/* download command */
+  mon960_cmds.loadresp =  "Downloading\n\r" ;/* load response */
+#endif
+  mon960_cmds.prompt =   "=>";		/* monitor command prompt */
+  mon960_cmds.line_term =  "\n\r";		/* end-of-command delimitor */  
+  mon960_cmds.cmd_end = NULL;		/* optional command terminator */
+  mon960_cmds.target =   &mon960_ops;		/* target operations */
+  mon960_cmds.stopbits =     SERIAL_1_STOPBITS;	/* number of stop bits */
+  mon960_cmds.regnames =  mon960_regnames;	/* registers names */
+  mon960_cmds.magic = MONITOR_OPS_MAGIC;	/* magic */
+};
+
+static void
+mon960_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[64];
+
+  monitor_open (args, &mon960_cmds, from_tty);
+
+  /* Attempt to fetch the value of the first floating point register (fp0).
+     If the monitor returns a string containing the word "Bad" we'll assume
+     this processor has no floating point registers, and nullify the 
+     regnames entries that refer to FP registers.  */
+
+  monitor_printf (mon960_cmds.getreg.cmd, full_regnames[FP0_REGNUM]); /* di fp0 */
+  if (monitor_expect_prompt (buf, sizeof(buf)) != -1)
+    if (strstr(buf, "Bad") != NULL)
+      {
+	int i;
+
+	for (i = FP0_REGNUM; i < FP0_REGNUM + 4; i++)
+	    mon960_regnames[i] = NULL;
+      }
+}
+
+void
+_initialize_mon960 ()
+{
+  memcpy(mon960_regnames, full_regnames, sizeof(full_regnames));
+
+  init_mon960_cmds ();
+
+  init_monitor_ops (&mon960_ops);
+
+  mon960_ops.to_shortname = "mon960"; /* for the target command */
+  mon960_ops.to_longname = "Intel 960 MON960 monitor";
+#ifdef USE_GENERIC_LOAD
+  mon960_ops.to_load = mon960_load_gen; /* FIXME - should go back and try "do" */
+#endif
+  /* use SW breaks; target only supports 2 HW breakpoints */
+  mon960_ops.to_insert_breakpoint = memory_insert_breakpoint; 
+  mon960_ops.to_remove_breakpoint = memory_remove_breakpoint; 
+
+  mon960_ops.to_doc = 
+    "Use an Intel 960 board running the MON960 debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+
+  mon960_ops.to_open = mon960_open;
+  add_target (&mon960_ops);
+}
diff --git a/gdb/monitor.c b/gdb/monitor.c
new file mode 100644
index 0000000..dc47d8c
--- /dev/null
+++ b/gdb/monitor.c
@@ -0,0 +1,2296 @@
+/* Remote debugging interface for boot monitors, for GDB.
+   Copyright 1990, 1991, 1992, 1993, 1995, 1996, 1997, 1999
+   Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Rob Savoye for Cygnus.
+   Resurrected from the ashes by Stu Grossman.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file was derived from various remote-* modules. It is a collection
+   of generic support functions so GDB can talk directly to a ROM based
+   monitor. This saves use from having to hack an exception based handler
+   into existance, and makes for quick porting.
+
+   This module talks to a debug monitor called 'MONITOR', which
+   We communicate with MONITOR via either a direct serial line, or a TCP
+   (or possibly TELNET) stream to a terminal multiplexor,
+   which in turn talks to the target board.  */
+
+/* FIXME 32x64: This code assumes that registers and addresses are at
+   most 32 bits long.  If they can be larger, you will need to declare
+   values as LONGEST and use %llx or some such to print values when
+   building commands to send to the monitor.  Since we don't know of
+   any actual 64-bit targets with ROM monitors that use this code,
+   it's not an issue right now.  -sts 4/18/96  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <signal.h>
+#include <ctype.h>
+#include "gdb_string.h"
+#include <sys/types.h>
+#include "command.h"
+#include "serial.h"
+#include "monitor.h"
+#include "gdbcmd.h"
+#include "inferior.h"
+#include "gnu-regex.h"
+#include "dcache.h"
+#include "srec.h"
+
+static char *dev_name;
+static struct target_ops *targ_ops;
+
+static void monitor_vsprintf PARAMS ((char *sndbuf, char *pattern, va_list args));
+
+static int readchar PARAMS ((int timeout));
+
+static void monitor_command PARAMS ((char *args, int fromtty));
+
+static void monitor_fetch_register PARAMS ((int regno));
+static void monitor_store_register PARAMS ((int regno));
+
+static int monitor_printable_string PARAMS ((char *newstr, char *oldstr));
+static void monitor_error PARAMS ((char *format, CORE_ADDR memaddr, int len, char *string, int final_char));
+static void monitor_detach PARAMS ((char *args, int from_tty));
+static void monitor_resume PARAMS ((int pid, int step, enum target_signal sig));
+static void monitor_interrupt PARAMS ((int signo));
+static void monitor_interrupt_twice PARAMS ((int signo));
+static void monitor_interrupt_query PARAMS ((void));
+static void monitor_wait_cleanup PARAMS ((void *old_timeout));
+
+static int monitor_wait PARAMS ((int pid, struct target_waitstatus *status));
+static void monitor_fetch_registers PARAMS ((int regno));
+static void monitor_store_registers PARAMS ((int regno));
+static void monitor_prepare_to_store PARAMS ((void));
+static int monitor_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len, int write, struct target_ops *target));
+static void monitor_files_info PARAMS ((struct target_ops *ops));
+static int monitor_insert_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static int monitor_remove_breakpoint PARAMS ((CORE_ADDR addr, char *shadow));
+static void monitor_kill PARAMS ((void));
+static void monitor_load PARAMS ((char *file, int from_tty));
+static void monitor_mourn_inferior PARAMS ((void));
+static void monitor_stop PARAMS ((void));
+
+static int monitor_read_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory PARAMS ((CORE_ADDR addr, char *myaddr,int len));
+static int monitor_write_memory_bytes PARAMS ((CORE_ADDR addr,
+					       char *myaddr,int len));
+static int monitor_write_memory_block PARAMS((
+					      CORE_ADDR memaddr ,
+					      char * myaddr ,
+					      int len)) ;
+static int monitor_expect_regexp PARAMS ((struct re_pattern_buffer *pat,
+					  char *buf, int buflen));
+static void monitor_dump_regs PARAMS((void)) ;
+#if 0
+static int from_hex PARAMS ((int a));
+static unsigned long get_hex_word PARAMS ((void));
+#endif
+static void parse_register_dump PARAMS ((char *, int));
+
+static struct monitor_ops *current_monitor;
+
+static int hashmark;		/* flag set by "set hash" */
+
+static int timeout = 30;
+
+static int in_monitor_wait = 0;	/* Non-zero means we are in monitor_wait() */
+
+static void (*ofunc)();		/* Old SIGINT signal handler */
+
+/* Extra remote debugging for developing a new rom monitor variation */
+#if ! defined(EXTRA_RDEBUG)
+#define EXTRA_RDEBUG 0
+#endif
+#define RDEBUG(stuff) { if (EXTRA_RDEBUG && remote_debug) printf stuff ; }
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so
+   that monitor_open knows that we don't have a file open when the
+   program starts.  */
+
+static serial_t monitor_desc = NULL;
+
+/* Pointer to regexp pattern matching data */
+
+static struct re_pattern_buffer register_pattern;
+static char register_fastmap[256];
+
+static struct re_pattern_buffer getmem_resp_delim_pattern;
+static char getmem_resp_delim_fastmap[256];
+
+static int dump_reg_flag;	/* Non-zero means do a dump_registers cmd when
+				   monitor_wait wakes up.  */
+
+static DCACHE *remote_dcache;
+static int first_time=0;	/* is this the first time we're executing after 
+					gaving created the child proccess? */
+
+/* Convert a string into a printable representation, Return # byte in the
+   new string.  */
+
+static int
+monitor_printable_string (newstr, oldstr)
+     char *newstr;
+     char *oldstr;
+{
+  char *save = newstr;
+  int ch;
+
+  while ((ch = *oldstr++) != '\0')
+    {
+      switch (ch)
+        {
+	default:
+	  if (isprint (ch))
+	    *newstr++ = ch;
+
+	  else
+	    {
+	      sprintf (newstr, "\\x%02x", ch & 0xff);
+	      newstr += 4;
+	    }
+	  break;
+
+	case '\\': *newstr++ = '\\'; *newstr++ = '\\';	break;
+	case '\b': *newstr++ = '\\'; *newstr++ = 'b';	break;
+	case '\f': *newstr++ = '\\'; *newstr++ = 't';	break;
+	case '\n': *newstr++ = '\\'; *newstr++ = 'n';	break;
+	case '\r': *newstr++ = '\\'; *newstr++ = 'r';	break;
+	case '\t': *newstr++ = '\\'; *newstr++ = 't';	break;
+	case '\v': *newstr++ = '\\'; *newstr++ = 'v';	break;
+        }
+    }
+
+  *newstr++ = '\0';
+  return newstr - save;
+}
+
+/* Print monitor errors with a string, converting the string to printable
+   representation.  */
+
+static void
+monitor_error (format, memaddr, len, string, final_char)
+     char *format;
+     CORE_ADDR memaddr;
+     int len;
+     char *string;
+     int final_char;
+{
+  int real_len = (len == 0 && string != (char *)0) ? strlen (string) : len;
+  char *safe_string = alloca ((real_len * 4) + 1);
+  char *p, *q;
+  int ch;
+  int safe_len = monitor_printable_string (safe_string, string);
+
+  if (final_char)
+    error (format, (int)memaddr, p - safe_string, safe_string, final_char);
+  else
+    error (format, (int)memaddr, p - safe_string, safe_string);
+}
+
+/* Convert hex digit A to a number.  */
+
+static int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  else if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  else
+    if (a >= 'A' && a <= 'F')
+      return a - 'A' + 10 ;
+  else error ("Invalid hex digit %d", a);
+}
+
+/* monitor_vsprintf - similar to vsprintf but handles 64-bit addresses
+
+   This function exists to get around the problem that many host platforms
+   don't have a printf that can print 64-bit addresses.  The %A format
+   specification is recognized as a special case, and causes the argument
+   to be printed as a 64-bit hexadecimal address.
+
+   Only format specifiers of the form "[0-9]*[a-z]" are recognized.
+   If it is a '%s' format, the argument is a string; otherwise the
+   argument is assumed to be a long integer.
+
+   %% is also turned into a single %.
+*/
+  
+static void
+monitor_vsprintf (sndbuf, pattern, args)
+     char *sndbuf;
+     char *pattern;
+     va_list args;
+{
+  char format[10];
+  char fmt;
+  char *p;
+  int i;
+  long arg_int;
+  CORE_ADDR arg_addr;
+  char *arg_string;
+
+  for (p = pattern; *p; p++)
+    {
+      if (*p == '%')
+	{
+	  /* Copy the format specifier to a separate buffer.  */
+	  format[0] = *p++;
+	  for (i = 1; *p >= '0' && *p <= '9' && i < (int) sizeof (format) - 2;
+	       i++, p++)
+	    format[i] = *p;
+	  format[i] = fmt = *p;
+	  format[i+1] = '\0';
+
+	  /* Fetch the next argument and print it.  */
+	  switch (fmt)
+	    {
+	    case '%':
+	      strcpy (sndbuf, "%");
+	      break;
+	    case 'A':
+	      arg_addr = va_arg (args, CORE_ADDR);
+	      strcpy (sndbuf, paddr_nz (arg_addr));
+	      break;
+	    case 's':
+	      arg_string = va_arg (args, char *);
+	      sprintf (sndbuf, format, arg_string);
+	      break;
+	    default:
+	      arg_int = va_arg (args, long);
+	      sprintf (sndbuf, format, arg_int);
+	      break;
+	    }
+	  sndbuf += strlen (sndbuf);
+	}
+      else
+	*sndbuf++ = *p;
+    }
+  *sndbuf = '\0';
+}
+
+
+/* monitor_printf_noecho -- Send data to monitor, but don't expect an echo.
+   Works just like printf.  */
+
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf_noecho (char *pattern, ...)
+#else
+monitor_printf_noecho (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char sndbuf[2000];
+  int len;
+
+#if ANSI_PROTOTYPES
+  va_start (args, pattern);
+#else
+  char *pattern;
+  va_start (args);
+  pattern = va_arg (args, char *);
+#endif
+
+  monitor_vsprintf (sndbuf, pattern, args);
+
+  len = strlen (sndbuf);
+  if (len + 1 > sizeof sndbuf)
+    abort ();
+
+#if 0
+  if (remote_debug > 0)
+    puts_debug ("sent -->", sndbuf, "<--");
+#endif
+  if (EXTRA_RDEBUG
+      && remote_debug)
+    {
+      char *safe_string = (char *) alloca ((strlen (sndbuf) * 4) + 1);
+      monitor_printable_string (safe_string, sndbuf);
+      printf ("sent[%s]\n", safe_string);
+    }
+  
+  monitor_write (sndbuf, len);
+}
+
+/* monitor_printf -- Send data to monitor and check the echo.  Works just like
+   printf.  */
+
+void
+#ifdef ANSI_PROTOTYPES
+monitor_printf (char *pattern, ...)
+#else
+monitor_printf (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char sndbuf[2000];
+  int len;
+
+#ifdef ANSI_PROTOTYPES
+  va_start (args, pattern);
+#else
+  char *pattern;
+  va_start (args);
+  pattern = va_arg (args, char *);
+#endif
+
+  monitor_vsprintf (sndbuf, pattern, args);
+
+  len = strlen (sndbuf);
+  if (len + 1 > sizeof sndbuf)
+    abort ();
+
+#if 0
+  if (remote_debug > 0)
+    puts_debug ("sent -->", sndbuf, "<--");
+#endif
+  if (EXTRA_RDEBUG
+      && remote_debug)
+    {
+      char *safe_string = (char *) alloca ((len * 4) + 1);
+      monitor_printable_string (safe_string, sndbuf);
+      printf ("sent[%s]\n", safe_string);
+    }
+
+  monitor_write (sndbuf, len);
+
+  /* We used to expect that the next immediate output was the characters we
+     just output, but sometimes some extra junk appeared before the characters
+     we expected, like an extra prompt, or a portmaster sending telnet negotiations.
+     So, just start searching for what we sent, and skip anything unknown.  */
+  RDEBUG(("ExpectEcho\n"))
+  monitor_expect (sndbuf, (char *)0, 0);
+}
+
+
+/* Write characters to the remote system.  */
+
+void
+monitor_write (buf, buflen)
+     char *buf;
+     int buflen;
+{
+  if (SERIAL_WRITE(monitor_desc, buf, buflen))
+    fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n",
+			safe_strerror (errno));
+}
+
+
+/* Read a binary character from the remote system, doing all the fancy
+   timeout stuff, but without interpreting the character in any way,
+   and without printing remote debug information.  */
+
+int
+monitor_readchar ()
+{
+  int c;
+  int looping;
+
+  do
+    {
+      looping = 0;
+      c = SERIAL_READCHAR (monitor_desc, timeout);
+
+      if (c >= 0)
+	c &= 0xff;			/* don't lose bit 7 */
+    }
+  while (looping);
+
+  if (c >= 0)
+    return c;
+
+  if (c == SERIAL_TIMEOUT)
+      error ("Timeout reading from remote system.");
+
+  perror_with_name ("remote-monitor");
+}
+
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+
+static int
+readchar (timeout)
+     int timeout;
+{
+  int c;
+  static enum { last_random, last_nl, last_cr, last_crnl } state = last_random;
+  int looping;
+
+  do
+    {
+      looping = 0;
+      c = SERIAL_READCHAR (monitor_desc, timeout);
+
+      if (c >= 0)
+	{
+	  c &= 0x7f;
+#if 0
+	  /* This seems to interfere with proper function of the
+	     input stream */
+	  if (remote_debug > 0)
+	    {
+	      char buf[2];
+	      buf[0] = c;
+	      buf[1] = '\0';
+	      puts_debug ("read -->", buf, "<--");
+	    }
+	  
+#endif	  
+	}
+
+      /* Canonicialize \n\r combinations into one \r */
+      if ((current_monitor->flags & MO_HANDLE_NL) != 0)
+	{
+	  if ((c == '\r' && state == last_nl)
+	      || (c == '\n' && state == last_cr))
+	    {
+	      state = last_crnl;
+	      looping = 1;
+	    }
+	  else if (c == '\r')
+	    state = last_cr;
+	  else if (c != '\n')
+	    state = last_random;
+	  else
+	    {
+	      state = last_nl;
+	      c = '\r';
+	    }
+	}
+    }
+  while (looping);
+
+  if (c >= 0)
+    return c;
+
+  if (c == SERIAL_TIMEOUT)
+#if 0 /* MAINTENANCE_CMDS */
+    /* I fail to see how detaching here can be useful */
+    if (in_monitor_wait)	/* Watchdog went off */
+      {
+	target_mourn_inferior ();
+	error ("GDB serial timeout has expired.  Target detached.\n");
+      }
+    else
+#endif
+      error ("Timeout reading from remote system.");
+
+  perror_with_name ("remote-monitor");
+}
+
+/* Scan input from the remote system, until STRING is found.  If BUF is non-
+   zero, then collect input until we have collected either STRING or BUFLEN-1
+   chars.  In either case we terminate BUF with a 0.  If input overflows BUF
+   because STRING can't be found, return -1, else return number of chars in BUF
+   (minus the terminating NUL).  Note that in the non-overflow case, STRING
+   will be at the end of BUF.  */
+
+int
+monitor_expect (string, buf, buflen)
+     char *string;
+     char *buf;
+     int buflen;
+{
+  char *p = string;
+  int obuflen = buflen;
+  int c;
+  extern struct target_ops *targ_ops;
+
+  if (EXTRA_RDEBUG
+      && remote_debug)
+    {
+      char *safe_string = (char *) alloca ((strlen (string) * 4) + 1);
+      monitor_printable_string (safe_string, string);
+      printf ("MON Expecting '%s'\n", safe_string);
+    }
+
+  immediate_quit = 1;
+  while (1)
+    {
+      if (buf)
+	{
+	  if (buflen < 2)
+	    {
+	      *buf = '\000';
+	      immediate_quit = 0;
+	      return -1;
+	    }
+
+	  c = readchar (timeout);
+	  if (c == '\000')
+	    continue;
+	  *buf++ = c;
+	  buflen--;
+	}
+      else
+	c = readchar (timeout);
+
+      /* Don't expect any ^C sent to be echoed */
+	
+      if (*p == '\003' || c == *p)
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+
+	      if (buf)
+		{
+		  *buf++ = '\000';
+		  return obuflen - buflen;
+		}
+	      else
+		return 0;
+	    }
+	}
+      else if ((c == '\021' || c == '\023') &&
+	       (STREQ (targ_ops->to_shortname, "m32r")
+		|| STREQ (targ_ops->to_shortname, "mon2000")))
+	{ /* m32r monitor emits random DC1/DC3 chars */
+	  continue;
+	}
+      else
+	{
+	  p = string;
+	  if (c == *p)
+	    p++;
+	}
+    }
+}
+
+/* Search for a regexp.  */
+
+static int
+monitor_expect_regexp (pat, buf, buflen)
+     struct re_pattern_buffer *pat;
+     char *buf;
+     int buflen;
+{
+  char *mybuf;
+  char *p;
+  RDEBUG(("MON Expecting regexp\n")) ;
+  if (buf)
+    mybuf = buf;
+  else
+    {
+      mybuf = alloca (1024);
+      buflen = 1024;
+    }
+
+  p = mybuf;
+  while (1)
+    {
+      int retval;
+
+      if (p - mybuf >= buflen)
+	{			/* Buffer about to overflow */
+
+/* On overflow, we copy the upper half of the buffer to the lower half.  Not
+   great, but it usually works... */
+
+	  memcpy (mybuf, mybuf + buflen / 2, buflen / 2);
+	  p = mybuf + buflen / 2;
+	}
+
+      *p++ = readchar (timeout);
+
+      retval = re_search (pat, mybuf, p - mybuf, 0, p - mybuf, NULL);
+      if (retval >= 0)
+	return 1;
+    }
+}
+
+/* Keep discarding input until we see the MONITOR prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line will
+   be an monitor_expect_prompt().  Exception: monitor_resume does not
+   wait for the prompt, because the terminal is being handed over to
+   the inferior.  However, the next thing which happens after that is
+   a monitor_wait which does wait for the prompt.  Note that this
+   includes abnormal exit, e.g. error().  This is necessary to prevent
+   getting into states from which we can't recover.  */
+
+int
+monitor_expect_prompt (buf, buflen)
+     char *buf;
+     int buflen;
+{
+  RDEBUG(("MON Expecting prompt\n"))
+  return monitor_expect (current_monitor->prompt, buf, buflen);
+}
+
+/* Get N 32-bit words from remote, each preceded by a space, and put
+   them in registers starting at REGNO.  */
+
+#if 0
+static unsigned long
+get_hex_word ()
+{
+  unsigned long val;
+  int i;
+  int ch;
+
+  do
+    ch = readchar (timeout);
+  while (isspace(ch));
+
+  val = from_hex (ch);
+
+  for (i = 7; i >= 1; i--)
+    {
+      ch = readchar (timeout);
+      if (!isxdigit (ch))
+	break;
+      val = (val << 4) | from_hex (ch);
+    }
+
+  return val;
+}
+#endif
+
+static void
+compile_pattern (pattern, compiled_pattern, fastmap)
+     char *pattern;
+     struct re_pattern_buffer *compiled_pattern;
+     char *fastmap;
+{
+  int tmp;
+  const char *val;
+
+  compiled_pattern->fastmap = fastmap;
+
+  tmp = re_set_syntax (RE_SYNTAX_EMACS);
+  val = re_compile_pattern (pattern,
+			    strlen (pattern),
+			    compiled_pattern);
+  re_set_syntax (tmp);
+
+  if (val)
+    error ("compile_pattern: Can't compile pattern string `%s': %s!", pattern, val);
+
+  if (fastmap)
+    re_compile_fastmap (compiled_pattern);
+}
+
+/* Open a connection to a remote debugger. NAME is the filename used
+   for communication.  */
+
+void
+monitor_open (args, mon_ops, from_tty)
+     char *args;
+     struct monitor_ops *mon_ops;
+     int from_tty;
+{
+  char *name;
+  char **p;
+
+  if (mon_ops->magic != MONITOR_OPS_MAGIC)
+    error ("Magic number of monitor_ops struct wrong.");
+
+  targ_ops = mon_ops->target;
+  name = targ_ops->to_shortname;
+
+  if (!args)
+    error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+
+  target_preopen (from_tty);
+
+  /* Setup pattern for register dump */
+
+  if (mon_ops->register_pattern)
+    compile_pattern (mon_ops->register_pattern, &register_pattern,
+		     register_fastmap);
+
+  if (mon_ops->getmem.resp_delim)
+    compile_pattern (mon_ops->getmem.resp_delim, &getmem_resp_delim_pattern,
+		     getmem_resp_delim_fastmap);
+
+  unpush_target (targ_ops);
+
+  if (dev_name)
+    free (dev_name);
+  dev_name = strsave (args);
+
+  monitor_desc = SERIAL_OPEN (dev_name);
+
+  if (!monitor_desc)
+    perror_with_name (dev_name);
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (monitor_desc, baud_rate))
+	{
+	  SERIAL_CLOSE (monitor_desc);
+	  perror_with_name (dev_name);
+	}
+    }
+  
+  SERIAL_RAW (monitor_desc);
+
+  SERIAL_FLUSH_INPUT (monitor_desc);
+
+  /* some systems only work with 2 stop bits */
+
+  SERIAL_SETSTOPBITS (monitor_desc, mon_ops->stopbits);
+
+  current_monitor = mon_ops;
+
+  /* See if we can wake up the monitor.  First, try sending a stop sequence,
+     then send the init strings.  Last, remove all breakpoints.  */
+
+  if (current_monitor->stop)
+    {
+      monitor_stop ();
+      if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
+        {
+	  RDEBUG(("EXP Open echo\n")) ;
+	  monitor_expect_prompt (NULL, 0); 
+      }
+    }
+
+  /* wake up the monitor and see if it's alive */
+  for (p = mon_ops->init; *p != NULL; p++)
+    {
+      /* Some of the characters we send may not be echoed,
+	 but we hope to get a prompt at the end of it all. */
+	 
+      if ((current_monitor->flags & MO_NO_ECHO_ON_OPEN) == 0)
+        monitor_printf(*p); 
+      else
+        monitor_printf_noecho (*p);
+      monitor_expect_prompt (NULL, 0);
+    }
+
+  SERIAL_FLUSH_INPUT (monitor_desc);
+
+  /* Remove all breakpoints */
+
+  if (mon_ops->clr_all_break)
+    {
+      monitor_printf (mon_ops->clr_all_break);
+      monitor_expect_prompt (NULL, 0);
+    }
+
+  if (from_tty)
+    printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name);
+
+  push_target (targ_ops);
+
+  inferior_pid = 42000;		/* Make run command think we are busy... */
+
+  /* Give monitor_wait something to read */
+
+  monitor_printf (current_monitor->line_term);
+
+  if (current_monitor->flags & MO_HAS_BLOCKWRITES)
+    remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory_block);
+  else
+    remote_dcache = dcache_init (monitor_read_memory, monitor_write_memory);
+  start_remote ();
+}
+
+/* Close out all files and local state before this target loses
+   control.  */
+
+void
+monitor_close (quitting)
+     int quitting;
+{
+  if (monitor_desc)
+    SERIAL_CLOSE (monitor_desc);
+  monitor_desc = NULL;
+}
+
+/* Terminate the open connection to the remote debugger.  Use this
+   when you want to detach and do something else with your gdb.  */
+
+static void
+monitor_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  pop_target ();		/* calls monitor_close to do the real work */
+  if (from_tty)
+    printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
+}
+
+/* Convert VALSTR into the target byte-ordered value of REGNO and store it.  */
+
+char *
+monitor_supply_register (regno, valstr)
+     int regno;
+     char *valstr;
+{
+  unsigned int val;
+  unsigned char regbuf[MAX_REGISTER_RAW_SIZE];
+  char *p;
+
+  val = strtoul (valstr, &p, 16);
+  RDEBUG(("Supplying Register %d %s\n",regno,valstr)) ;
+
+  if (val == 0 && valstr == p)
+    error ("monitor_supply_register (%d):  bad value from monitor: %s.",
+	   regno, valstr);
+
+  /* supply register stores in target byte order, so swap here */
+
+  store_unsigned_integer (regbuf, REGISTER_RAW_SIZE (regno), val);
+
+  supply_register (regno, regbuf);
+
+  return p;
+}
+
+/* Tell the remote machine to resume.  */
+
+void
+flush_monitor_dcache ()
+{
+  dcache_flush (remote_dcache);
+}
+
+static void
+monitor_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  /* Some monitors require a different command when starting a program */
+  RDEBUG(("MON resume\n")) ;
+  if (current_monitor->flags & MO_RUN_FIRST_TIME && first_time == 1)
+    {
+      first_time = 0;
+      monitor_printf ("run\r");
+      if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+	    dump_reg_flag = 1;
+      return;
+    }
+  dcache_flush (remote_dcache);
+  if (step)
+    monitor_printf (current_monitor->step);
+  else
+    {
+      if (current_monitor->continue_hook)
+	(*current_monitor->continue_hook)() ;
+      else monitor_printf (current_monitor->cont);
+      if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT)
+	dump_reg_flag = 1;
+    }
+}
+
+/* Parse the output of a register dump command.  A monitor specific
+   regexp is used to extract individual register descriptions of the
+   form REG=VAL.  Each description is split up into a name and a value
+   string which are passed down to monitor specific code.  */
+
+static void
+parse_register_dump (buf, len)
+     char *buf;
+     int len;
+{
+  RDEBUG(("MON Parsing  register dump\n")) 
+  while (1)
+    {
+      int regnamelen, vallen;
+      char *regname, *val;
+      /* Element 0 points to start of register name, and element 1
+	 points to the start of the register value.  */
+      struct re_registers register_strings;
+
+      memset (&register_strings, 0, sizeof (struct re_registers));
+
+      if (re_search (&register_pattern, buf, len, 0, len,
+		     &register_strings) == -1)
+	break;
+
+      regnamelen = register_strings.end[1] - register_strings.start[1];
+      regname = buf + register_strings.start[1];
+      vallen = register_strings.end[2] - register_strings.start[2];
+      val = buf + register_strings.start[2];
+
+      current_monitor->supply_register (regname, regnamelen, val, vallen);
+
+      buf += register_strings.end[0];
+      len -= register_strings.end[0];
+    }
+}
+
+/* Send ^C to target to halt it.  Target will respond, and send us a
+   packet.  */
+
+static void
+monitor_interrupt (signo)
+     int signo;
+{
+  /* If this doesn't work, try more severe steps.  */
+  signal (signo, monitor_interrupt_twice);
+  
+  if (remote_debug)
+    printf_unfiltered ("monitor_interrupt called\n");
+
+  target_stop ();
+}
+
+/* The user typed ^C twice.  */
+
+static void
+monitor_interrupt_twice (signo)
+     int signo;
+{
+  signal (signo, ofunc);
+  
+  monitor_interrupt_query ();
+
+  signal (signo, monitor_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received.  */
+
+static void
+monitor_interrupt_query ()
+{
+  target_terminal_ours ();
+
+  if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+    {
+      target_mourn_inferior ();
+      return_to_top_level (RETURN_QUIT);
+    }
+
+  target_terminal_inferior ();
+}
+
+static void
+monitor_wait_cleanup (old_timeout)
+     void *old_timeout;
+{
+  timeout = *(int*)old_timeout;
+  signal (SIGINT, ofunc);
+  in_monitor_wait = 0;
+}
+
+
+
+void monitor_wait_filter(char * buf,
+			 int bufmax,
+			 int * ext_resp_len, 
+			 struct target_waitstatus * status
+			 )
+{
+  int resp_len ;
+  do
+    {
+      resp_len = monitor_expect_prompt (buf, bufmax);
+      * ext_resp_len =resp_len ;
+
+      if (resp_len <= 0)
+	fprintf_unfiltered (gdb_stderr, "monitor_wait:  excessive response from monitor: %s.", buf);
+    }
+  while (resp_len < 0);
+
+  /* Print any output characters that were preceded by ^O.  */
+  /* FIXME - This would be great as a user settabgle flag */
+  if (remote_debug ||
+      current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
+    {
+      int i;
+
+      for (i = 0; i < resp_len - 1; i++)
+	if (buf[i] == 0x0f)
+	  putchar_unfiltered (buf[++i]);
+    }
+}
+
+
+
+/* Wait until the remote machine stops, then return, storing status in
+   status just as `wait' would.  */
+
+static int
+monitor_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int old_timeout = timeout;
+  char buf[1024];
+  int resp_len;
+  struct cleanup *old_chain;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  old_chain = make_cleanup (monitor_wait_cleanup, &old_timeout);
+  RDEBUG(("MON wait\n"))
+
+#if 0 /* MAINTENANCE_CMDS */
+    /* This is somthing other than a maintenance command */
+  in_monitor_wait = 1;
+  timeout = watchdog > 0 ? watchdog : -1;
+#else
+  timeout = -1;		/* Don't time out -- user program is running. */
+#endif
+
+  ofunc = (void (*)()) signal (SIGINT, monitor_interrupt);
+
+  if (current_monitor->wait_filter)
+    (*current_monitor->wait_filter)(buf,sizeof (buf),&resp_len,status) ;
+  else          monitor_wait_filter(buf,sizeof (buf),&resp_len,status) ;
+      
+#if 0 /* Transferred to monitor wait filter */
+  do
+    {
+      resp_len = monitor_expect_prompt (buf, sizeof (buf));
+
+      if (resp_len <= 0)
+	fprintf_unfiltered (gdb_stderr, "monitor_wait:  excessive response from monitor: %s.", buf);
+    }
+  while (resp_len < 0);
+
+  /* Print any output characters that were preceded by ^O.  */
+  /* FIXME - This would be great as a user settabgle flag */
+  if (remote_debug ||
+      current_monitor->flags & MO_PRINT_PROGRAM_OUTPUT)
+    {
+      int i;
+
+      for (i = 0; i < resp_len - 1; i++)
+	if (buf[i] == 0x0f)
+	  putchar_unfiltered (buf[++i]);
+    }
+#endif  
+
+  signal (SIGINT, ofunc);
+
+  timeout = old_timeout;
+#if 0
+  if (dump_reg_flag && current_monitor->dump_registers)
+    {
+      dump_reg_flag = 0;
+      monitor_printf (current_monitor->dump_registers);
+      resp_len = monitor_expect_prompt (buf, sizeof (buf));
+    }
+
+  if (current_monitor->register_pattern)
+    parse_register_dump (buf, resp_len);
+#else
+  RDEBUG(("Wait fetching registers after stop\n")) ;
+  monitor_dump_regs() ;
+#endif  
+
+  status->kind = TARGET_WAITKIND_STOPPED;
+  status->value.sig = TARGET_SIGNAL_TRAP;
+
+  discard_cleanups (old_chain);
+
+  in_monitor_wait = 0;
+
+  return inferior_pid;
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1. Returns
+   errno value.  */
+
+static void
+monitor_fetch_register (regno)
+     int regno;
+{
+  char *name;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+  char regbuf[MAX_REGISTER_RAW_SIZE * 2 + 1];
+  int i;
+
+  name = current_monitor->regnames[regno];
+  RDEBUG(("MON fetchreg %d '%s'\n",regno,name)) 
+
+  if (!name || (*name == '\0'))
+    { RDEBUG(("No register known for %d\n",regno))
+      supply_register (regno, zerobuf);
+      return;
+    }
+
+  /* send the register examine command */
+
+  monitor_printf (current_monitor->getreg.cmd, name);
+
+  /* If RESP_DELIM is specified, we search for that as a leading
+     delimiter for the register value.  Otherwise, we just start
+     searching from the start of the buf.  */
+
+  if (current_monitor->getreg.resp_delim)
+    {
+      RDEBUG(("EXP getreg.resp_delim\n")) 
+      monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+      /* Handle case of first 32 registers listed in pairs.  */
+      if (current_monitor->flags & MO_32_REGS_PAIRED
+	  && regno & 1 == 1 && regno < 32)
+	{ RDEBUG(("EXP getreg.resp_delim\n")) ;
+	  monitor_expect (current_monitor->getreg.resp_delim, NULL, 0);
+	}
+    }
+
+  /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set */
+  if (current_monitor->flags & MO_HEX_PREFIX) 
+    {
+      int c;
+      c = readchar (timeout);
+      while (c == ' ')
+	c = readchar (timeout);
+      if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+	;
+      else
+	  error ("Bad value returned from monitor while fetching register %x.",
+		 regno);
+    }
+
+  /* Read upto the maximum number of hex digits for this register, skipping
+     spaces, but stop reading if something else is seen.  Some monitors
+     like to drop leading zeros.  */
+
+  for (i = 0; i < REGISTER_RAW_SIZE (regno) * 2; i++)
+    {
+      int c;
+      c = readchar (timeout);
+      while (c == ' ')
+	c = readchar (timeout);
+
+      if (!isxdigit (c))
+	break;
+
+      regbuf[i] = c;
+    }
+
+  regbuf[i] = '\000';		/* terminate the number */
+  RDEBUG(("REGVAL '%s'\n",regbuf)) ;
+
+  /* If TERM is present, we wait for that to show up.  Also, (if TERM
+     is present), we will send TERM_CMD if that is present.  In any
+     case, we collect all of the output into buf, and then wait for
+     the normal prompt.  */
+
+  if (current_monitor->getreg.term)
+    {
+      RDEBUG(("EXP getreg.term\n"))
+      monitor_expect (current_monitor->getreg.term, NULL, 0); /* get response */
+    }
+
+  if (current_monitor->getreg.term_cmd)
+    { RDEBUG(("EMIT getreg.term.cmd\n"))
+	monitor_printf (current_monitor->getreg.term_cmd);
+    }
+  if (! current_monitor->getreg.term ||    /* Already expected or */
+      current_monitor->getreg.term_cmd)    /* ack expected */
+    monitor_expect_prompt (NULL, 0); /* get response */
+
+  monitor_supply_register (regno, regbuf);
+}
+
+/* Sometimes, it takes several commands to dump the registers */
+/* This is a primitive for use by variations of monitor interfaces in
+   case they need to compose the operation.
+   */
+int monitor_dump_reg_block(char * block_cmd)
+{
+  char buf[1024];
+  int resp_len;
+  monitor_printf (block_cmd);
+  resp_len = monitor_expect_prompt (buf, sizeof (buf));
+  parse_register_dump (buf, resp_len);
+  return 1 ;
+}
+
+
+/* Read the remote registers into the block regs.  */
+/* Call the specific function if it has been provided */
+
+static void
+monitor_dump_regs ()
+{
+  char buf[1024];
+  int resp_len;
+  if (current_monitor->dumpregs)
+     (*(current_monitor->dumpregs))() ; /* call supplied function */
+  else
+    if (current_monitor->dump_registers) /* default version */
+    { monitor_printf (current_monitor->dump_registers);
+      resp_len = monitor_expect_prompt (buf, sizeof (buf));
+      parse_register_dump (buf, resp_len);
+    }
+  else
+    abort(); /* Need some way to read registers */
+}
+
+static void
+monitor_fetch_registers (regno)
+     int regno;
+{
+  RDEBUG(("MON fetchregs\n")) ;
+  if (current_monitor->getreg.cmd) 
+    {
+      if (regno >= 0)
+	{
+	  monitor_fetch_register (regno);
+	  return;
+	}
+
+      for (regno = 0; regno < NUM_REGS; regno++)
+	monitor_fetch_register (regno);
+    }
+  else {
+    monitor_dump_regs ();
+  }
+}
+
+/* Store register REGNO, or all if REGNO == 0.  Return errno value.  */
+
+static void
+monitor_store_register (regno)
+     int regno;
+{
+  char *name;
+  unsigned int val;
+
+  name = current_monitor->regnames[regno];
+  if (!name || (*name == '\0'))
+    { RDEBUG(("MON Cannot store unknown register\n"))
+      return;
+    }
+
+  val = read_register (regno);
+  RDEBUG(("MON storeg %d %08x\n",regno,(unsigned int)val))
+
+  /* send the register deposit command */
+
+  if (current_monitor->flags & MO_REGISTER_VALUE_FIRST)
+    monitor_printf (current_monitor->setreg.cmd, val, name);
+  else if (current_monitor->flags & MO_SETREG_INTERACTIVE)
+    monitor_printf (current_monitor->setreg.cmd, name);
+  else
+    monitor_printf (current_monitor->setreg.cmd, name, val);
+
+  if (current_monitor->setreg.term)
+    { RDEBUG(("EXP setreg.term\n"))
+      monitor_expect (current_monitor->setreg.term, NULL, 0);
+      if (current_monitor->flags & MO_SETREG_INTERACTIVE)
+	monitor_printf ("%x\r", val);
+      monitor_expect_prompt (NULL, 0);
+    }
+  else
+    monitor_expect_prompt (NULL, 0);
+  if (current_monitor->setreg.term_cmd) /* Mode exit required */
+    { RDEBUG(("EXP setreg_termcmd\n")) ;
+      monitor_printf("%s",current_monitor->setreg.term_cmd) ;
+      monitor_expect_prompt(NULL,0) ;
+    }
+} /* monitor_store_register */
+
+/* Store the remote registers.  */
+
+static void
+monitor_store_registers (regno)
+     int regno;
+{
+  if (regno >= 0)
+    {
+      monitor_store_register (regno);
+      return;
+    }
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    monitor_store_register (regno);
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+monitor_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+monitor_files_info (ops)
+     struct target_ops *ops;
+{
+  printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baud_rate);
+}
+
+static int
+monitor_write_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  unsigned int val, hostval ;
+  char *cmd;
+  int i;
+
+  RDEBUG(("MON write %d %08x\n",len,(unsigned long)memaddr))
+
+  if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+    memaddr = ADDR_BITS_REMOVE (memaddr);
+
+  /* Use memory fill command for leading 0 bytes.  */
+
+  if (current_monitor->fill)
+    {
+      for (i = 0; i < len; i++)
+	if (myaddr[i] != 0)
+	  break;
+
+      if (i > 4)		/* More than 4 zeros is worth doing */
+	{
+	  RDEBUG(("MON FILL %d\n",i))
+	    if (current_monitor->flags & MO_FILL_USES_ADDR)
+	      monitor_printf (current_monitor->fill, memaddr, (memaddr + i)-1, 0);
+	    else
+	      monitor_printf (current_monitor->fill, memaddr, i, 0);
+
+	  monitor_expect_prompt (NULL, 0);
+
+	  return i;
+	}
+    }
+
+#if 0
+  /* Can't actually use long longs if VAL is an int (nice idea, though).  */
+  if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->setmem.cmdll)
+    {
+      len = 8;
+      cmd = current_monitor->setmem.cmdll;
+    }
+  else
+#endif
+  if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->setmem.cmdl)
+    {
+      len = 4;
+      cmd = current_monitor->setmem.cmdl;
+    }
+  else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->setmem.cmdw)
+    {
+      len = 2;
+      cmd = current_monitor->setmem.cmdw;
+    }
+  else
+    {
+      len = 1;
+      cmd = current_monitor->setmem.cmdb;
+    }
+
+  val = extract_unsigned_integer (myaddr, len);
+  
+  if (len == 4)
+    { hostval = * (unsigned int *) myaddr ;
+      RDEBUG(("Hostval(%08x) val(%08x)\n",hostval,val)) ;
+    }
+
+
+  if (current_monitor->flags & MO_NO_ECHO_ON_SETMEM)
+    monitor_printf_noecho (cmd, memaddr, val);
+  else if (current_monitor->flags & MO_SETMEM_INTERACTIVE)
+    {
+
+      monitor_printf_noecho (cmd, memaddr);
+
+      if (current_monitor->setmem.term)
+	{ RDEBUG(("EXP setmem.term")) ;
+	  monitor_expect (current_monitor->setmem.term, NULL, 0);
+	  monitor_printf ("%x\r", val);
+	}
+      if (current_monitor->setmem.term_cmd)
+	{ /* Emit this to get out of the memory editing state */
+	  monitor_printf("%s",current_monitor->setmem.term_cmd) ;
+	  /* Drop through to expecting a prompt */
+	}
+    }
+  else
+    monitor_printf (cmd, memaddr, val);
+
+  monitor_expect_prompt (NULL, 0);
+
+  return len;
+}
+
+
+static int
+monitor_write_even_block(memaddr,myaddr,len)
+     CORE_ADDR memaddr ;
+     char * myaddr ;
+     int len ;
+{
+  unsigned int val ;
+  int written = 0 ;;
+  /* Enter the sub mode */
+  monitor_printf(current_monitor->setmem.cmdl,memaddr) ;
+  monitor_expect_prompt(NULL,0) ;
+ 
+  while (len)
+    {
+      val = extract_unsigned_integer(myaddr,4) ; /* REALLY */
+      monitor_printf("%x\r",val) ;
+      myaddr += 4 ;
+      memaddr += 4 ;
+      written += 4 ;
+      RDEBUG((" @ %08x\n",memaddr))
+      /* If we wanted to, here we could validate the address */
+      monitor_expect_prompt(NULL,0) ;
+    }
+  /* Now exit the sub mode */
+  monitor_printf (current_monitor->getreg.term_cmd);
+  monitor_expect_prompt(NULL,0) ;
+  return written ;
+}
+
+
+static int monitor_write_memory_bytes(memaddr,myaddr,len)
+     CORE_ADDR memaddr ;
+     char * myaddr ;
+     int len ;
+{
+  unsigned char val ;
+  int written = 0 ;
+  if (len == 0) return 0 ;
+  /* Enter the sub mode */
+  monitor_printf(current_monitor->setmem.cmdb,memaddr) ;
+  monitor_expect_prompt(NULL,0) ;
+  while (len)
+    {
+      val = *myaddr ;
+      monitor_printf("%x\r",val) ;
+      myaddr++ ;
+      memaddr++ ;
+      written++ ;
+      /* If we wanted to, here we could validate the address */
+      monitor_expect_prompt(NULL,0) ;
+      len-- ;
+    }
+  /* Now exit the sub mode */
+  monitor_printf (current_monitor->getreg.term_cmd);
+  monitor_expect_prompt(NULL,0) ;
+  return written ;
+}
+
+
+static void
+longlongendswap (unsigned char * a)
+{
+  int i,j ;
+  unsigned char x ;
+  i = 0 ; j = 7 ;
+  while (i < 4)
+    { x = *(a+i) ;
+      *(a+i) = *(a+j) ;
+      *(a+j) = x ;
+      i++ , j-- ;
+    }
+}
+/* Format 32 chars of long long value, advance the pointer */
+static char * hexlate = "0123456789abcdef" ;
+static char * longlong_hexchars(unsigned long long value,
+				 char * outbuff )
+{
+  if (value == 0) { *outbuff++ = '0' ; return outbuff ; }
+  else
+    { static unsigned char disbuf[8] ; /* disassembly buffer */
+      unsigned char * scan , * limit ; /* loop controls */
+      unsigned char c , nib ;
+      int leadzero = 1 ;
+      scan = disbuf ; limit = scan + 8 ;
+      { unsigned long long * dp ;
+	dp = (unsigned long long *) scan ;
+	*dp = value ;
+      }
+      longlongendswap(disbuf) ; /* FIXME: ONly on big endian hosts */
+      while (scan < limit)
+	{ c = *scan++ ; /* a byte of our long long value */
+	  if (leadzero)
+	    if (c == 0) continue ;
+	    else leadzero = 0 ; /* henceforth we print even zeroes */
+	  nib = c >> 4 ;        /* high nibble bits */
+	  *outbuff++ = hexlate[nib] ;
+	  nib = c & 0x0f ;      /* low nibble bits */
+	  *outbuff++ = hexlate[nib] ;
+	}
+      return outbuff ;
+    }
+} /* longlong_hexchars */
+
+
+
+/* I am only going to call this when writing virtual byte streams.
+   Which possably entails endian conversions
+   */
+static int monitor_write_memory_longlongs(memaddr,myaddr,len)
+     CORE_ADDR memaddr ;
+     char * myaddr ;
+     int len ;
+{
+  static char hexstage[20] ; /* At least 16 digits required, plus null */
+  char * endstring ;
+  long long * llptr ;
+  long long value ;
+  int written = 0 ;
+  llptr = (unsigned long long *) myaddr ;
+  if (len == 0 ) return 0 ;
+  monitor_printf(current_monitor->setmem.cmdll,memaddr) ;
+  monitor_expect_prompt(NULL,0) ;
+  while (len >= 8 )
+    {
+      value = *llptr ;
+      endstring = longlong_hexchars(*llptr,hexstage) ;
+      *endstring = '\0' ; /* NUll terminate for printf */
+      monitor_printf("%s\r",hexstage) ;
+      llptr++ ;
+      memaddr += 8 ;
+      written += 8 ;
+      /* If we wanted to, here we could validate the address */
+      monitor_expect_prompt(NULL,0) ;
+      len -= 8 ;
+    }
+  /* Now exit the sub mode */
+  monitor_printf (current_monitor->getreg.term_cmd);
+  monitor_expect_prompt(NULL,0) ;
+  return written ;
+} /* */
+
+
+
+/* ----- MONITOR_WRITE_MEMORY_BLOCK ---------------------------- */
+/* This is for the large blocks of memory which may occur in downloading.
+   And for monitors which use interactive entry,
+   And for monitors which do not have other downloading methods.
+   Without this, we will end up calling monitor_write_memory many times
+   and do the entry and exit of the sub mode many times
+   This currently assumes...
+     MO_SETMEM_INTERACTIVE
+     ! MO_NO_ECHO_ON_SETMEM
+     To use this, the you have to patch the monitor_cmds block with
+     this function. Otherwise, its not tuned up for use by all
+     monitor variations.
+   */
+
+static int monitor_write_memory_block(memaddr,myaddr,len)
+     CORE_ADDR memaddr ;
+     char * myaddr ;
+     int len ;
+{
+  int written ;
+  written = 0 ;
+  /* FIXME: This would be a good place to put the zero test */
+#if 1 
+  if ((len > 8) && (((len & 0x07)) == 0) && current_monitor->setmem.cmdll)
+       {
+	 return monitor_write_memory_longlongs(memaddr,myaddr,len) ;
+       }
+#endif  
+#if 0 
+  if (len > 4)
+    {
+      int sublen ;
+      written = monitor_write_even_block(memaddr,myaddr,len) ;
+      /* Adjust calling parameters by written amount */
+      memaddr += written ;
+      myaddr += written ;
+      len -= written ;
+    }
+#endif
+  written = monitor_write_memory_bytes(memaddr,myaddr,len) ;
+  return written ;
+}
+
+/* This is an alternate form of monitor_read_memory which is used for monitors
+   which can only read a single byte/word/etc. at a time.  */
+
+static int
+monitor_read_memory_single (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  unsigned int val;
+  char membuf[sizeof(int) * 2 + 1];
+  char *p;
+  char *cmd;
+  int i;
+
+  RDEBUG(("MON read single\n")) ;
+#if 0
+  /* Can't actually use long longs (nice idea, though).  In fact, the
+     call to strtoul below will fail if it tries to convert a value
+     that's too big to fit in a long.  */
+  if ((memaddr & 0x7) == 0 && len >= 8 && current_monitor->getmem.cmdll)
+    {
+      len = 8;
+      cmd = current_monitor->getmem.cmdll;
+    }
+  else
+#endif
+  if ((memaddr & 0x3) == 0 && len >= 4 && current_monitor->getmem.cmdl)
+    {
+      len = 4;
+      cmd = current_monitor->getmem.cmdl;
+    }
+  else if ((memaddr & 0x1) == 0 && len >= 2 && current_monitor->getmem.cmdw)
+    {
+      len = 2;
+      cmd = current_monitor->getmem.cmdw;
+    }
+  else
+    {
+      len = 1;
+      cmd = current_monitor->getmem.cmdb;
+    }
+
+  /* Send the examine command.  */
+
+  monitor_printf (cmd, memaddr);
+
+  /* If RESP_DELIM is specified, we search for that as a leading
+     delimiter for the memory value.  Otherwise, we just start
+     searching from the start of the buf.  */
+
+  if (current_monitor->getmem.resp_delim)
+    { RDEBUG(("EXP getmem.resp_delim\n")) ;
+      monitor_expect_regexp (&getmem_resp_delim_pattern, NULL, 0);
+    }
+
+  /* Now, read the appropriate number of hex digits for this loc,
+     skipping spaces.  */
+
+  /* Skip leading spaces and "0x" if MO_HEX_PREFIX flag is set. */
+  if (current_monitor->flags & MO_HEX_PREFIX) 
+    {
+      int c;
+
+      c = readchar (timeout);
+      while (c == ' ')
+	c = readchar (timeout);
+      if ((c == '0') && ((c = readchar (timeout)) == 'x'))
+	;
+      else
+	monitor_error ("monitor_read_memory_single (0x%x):  bad response from monitor: %.*s%c.",
+		       memaddr, i, membuf, c);
+    }
+  for (i = 0; i < len * 2; i++)
+    {
+      int c;
+
+      while (1)
+	{
+	  c = readchar (timeout);
+	  if (isxdigit (c))
+	    break;
+	  if (c == ' ')
+	    continue;
+
+	  monitor_error ("monitor_read_memory_single (0x%x):  bad response from monitor: %.*s%c.",
+			 memaddr, i, membuf, c);
+	}
+
+      membuf[i] = c;
+    }
+
+  membuf[i] = '\000';		/* terminate the number */
+
+/* If TERM is present, we wait for that to show up.  Also, (if TERM is
+   present), we will send TERM_CMD if that is present.  In any case, we collect
+   all of the output into buf, and then wait for the normal prompt.  */
+
+  if (current_monitor->getmem.term)
+    {
+      monitor_expect (current_monitor->getmem.term, NULL, 0); /* get response */
+
+      if (current_monitor->getmem.term_cmd)
+	{
+	  monitor_printf (current_monitor->getmem.term_cmd);
+	  monitor_expect_prompt (NULL, 0);
+	}
+    }
+  else
+    monitor_expect_prompt (NULL, 0); /* get response */
+
+  p = membuf;
+  val = strtoul (membuf, &p, 16);
+
+  if (val == 0 && membuf == p)
+    monitor_error ("monitor_read_memory_single (0x%x):  bad value from monitor: %s.",
+		   memaddr, 0, membuf, 0);
+
+  /* supply register stores in target byte order, so swap here */
+
+  store_unsigned_integer (myaddr, len, val);
+
+  return len;
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
+   memory at MEMADDR.  Returns length moved.  Currently, we do no more
+   than 16 bytes at a time.  */
+
+static int
+monitor_read_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  unsigned int val;
+  char buf[512];
+  char *p, *p1;
+  int resp_len;
+  int i;
+  CORE_ADDR dumpaddr;
+
+  if (len <= 0)
+    {
+      RDEBUG (("Zero length call to monitor_read_memory\n"));
+      return 0;
+    }
+
+  if (remote_debug) printf("MON read block ta(%08x) ha(%08x) %d\n",
+	  (unsigned long) memaddr , (unsigned long)myaddr, len);
+
+  if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+    memaddr = ADDR_BITS_REMOVE (memaddr);
+
+  if (current_monitor->flags & MO_GETMEM_READ_SINGLE)
+    return monitor_read_memory_single (memaddr, myaddr, len);
+
+  len = min (len, 16);
+
+  /* Some dumpers align the first data with the preceeding 16
+     byte boundary. Some print blanks and start at the
+     requested boundary. EXACT_DUMPADDR
+     */
+
+  dumpaddr = (current_monitor->flags & MO_EXACT_DUMPADDR)
+    ? memaddr : memaddr & ~ 0x0f ;
+
+  /* See if xfer would cross a 16 byte boundary.  If so, clip it.  */
+  if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0)
+    len = ((memaddr + len) & ~0xf) - memaddr;
+
+  /* send the memory examine command */
+
+  if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE)
+    monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len - 1);
+  else if (current_monitor->flags & MO_GETMEM_16_BOUNDARY)
+    monitor_printf (current_monitor->getmem.cmdb, dumpaddr);
+  else
+    monitor_printf (current_monitor->getmem.cmdb, memaddr, len);
+
+  /* If TERM is present, we wait for that to show up.  Also, (if TERM
+     is present), we will send TERM_CMD if that is present.  In any
+     case, we collect all of the output into buf, and then wait for
+     the normal prompt.  */
+
+  if (current_monitor->getmem.term)
+    {
+      resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */
+
+      if (resp_len <= 0)
+	monitor_error ("monitor_read_memory (0x%x):  excessive response from monitor: %.*s.",
+		       memaddr, resp_len, buf, 0);
+
+      if (current_monitor->getmem.term_cmd)
+	{
+	  SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd,
+			strlen (current_monitor->getmem.term_cmd));
+	  monitor_expect_prompt (NULL, 0);
+	}
+    }
+  else
+    resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */
+
+  p = buf;
+
+  /* If RESP_DELIM is specified, we search for that as a leading
+     delimiter for the values.  Otherwise, we just start searching
+     from the start of the buf.  */
+
+  if (current_monitor->getmem.resp_delim)
+    {
+      int retval, tmp;
+      struct re_registers resp_strings;
+      RDEBUG(("MON getmem.resp_delim %s\n",current_monitor->getmem.resp_delim)) ;
+
+      memset (&resp_strings, 0, sizeof (struct re_registers));
+      tmp = strlen (p);
+      retval = re_search (&getmem_resp_delim_pattern, p, tmp, 0, tmp,
+			  &resp_strings);
+
+      if (retval < 0)
+	monitor_error ("monitor_read_memory (0x%x):  bad response from monitor: %.*s.",
+		       memaddr, resp_len, buf, 0);
+
+      p += resp_strings.end[0];
+#if 0
+      p = strstr (p, current_monitor->getmem.resp_delim);
+      if (!p)
+	monitor_error ("monitor_read_memory (0x%x):  bad response from monitor: %.*s.",
+		       memaddr, resp_len, buf, 0);
+      p += strlen (current_monitor->getmem.resp_delim);
+#endif
+    }
+  if (remote_debug) printf("MON scanning  %d ,%08x '%s'\n",len,p,p) ;
+  if (current_monitor->flags & MO_GETMEM_16_BOUNDARY)
+    {
+      char c ;
+      int fetched = 0 ;
+      i = len;
+      c = *p ;
+
+			    
+      while (!(c  == '\000' || c == '\n' || c == '\r') && i > 0)
+	{ if (isxdigit (c))
+	    { if ((dumpaddr >= memaddr) && (i > 0))
+		{ val = fromhex (c) * 16 + fromhex (*(p+1));
+		  *myaddr++ = val;
+		  if (remote_debug) printf("[%02x]",val) ;
+		  --i;
+		  fetched++ ;
+		}
+	      ++dumpaddr;
+	      ++p;
+	    }
+	  ++p; /* skip a blank or other non hex char */
+	  c = *p ;
+	}
+      if (fetched == 0) error("Failed to read via monitor") ;
+      if (remote_debug) printf("\n") ;
+      return fetched ; /* Return the number of bytes actually read */
+    }
+  RDEBUG(("MON scanning bytes\n")) ;
+
+  for (i = len; i > 0; i--)
+    {
+      /* Skip non-hex chars, but bomb on end of string and newlines */
+
+      while (1)
+	{
+	  if (isxdigit (*p))
+	    break;
+
+	  if (*p == '\000' || *p == '\n' || *p == '\r')
+	    monitor_error ("monitor_read_memory (0x%x):  badly terminated response from monitor: %.*s",
+			   memaddr, resp_len, buf, 0);
+	  p++;
+	}
+
+      val = strtoul (p, &p1, 16);
+
+      if (val == 0 && p == p1)
+	monitor_error ("monitor_read_memory (0x%x):  bad value from monitor: %.*s.",
+		       memaddr, resp_len, buf, 0);
+
+      *myaddr++ = val;
+
+      if (i == 1)
+	break;
+
+      p = p1;
+    }
+
+  return len;
+}
+
+static int
+monitor_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  return dcache_xfer_memory (remote_dcache, memaddr, myaddr, len, write);
+}
+
+static void
+monitor_kill ()
+{
+  return;		/* ignore attempts to kill target system */
+}
+
+/* All we actually do is set the PC to the start address of exec_bfd, and start
+   the program at that point.  */
+
+static void
+monitor_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  if (args && (*args != '\000'))
+    error ("Args are not supported by the monitor.");
+
+  first_time = 1;
+  clear_proceed_status ();
+  proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
+}
+
+/* Clean up when a program exits.
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+monitor_mourn_inferior ()
+{
+  unpush_target (targ_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define NUM_MONITOR_BREAKPOINTS 8
+
+static CORE_ADDR breakaddr[NUM_MONITOR_BREAKPOINTS] = {0};
+
+/* Tell the monitor to add a breakpoint.  */
+
+static int
+monitor_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+  unsigned char *bp;
+  int bplen;
+
+  RDEBUG(("MON inst bkpt %08x\n",addr)) 
+  if (current_monitor->set_break == NULL)
+    error ("No set_break defined for this monitor");
+
+  if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+    addr = ADDR_BITS_REMOVE (addr);
+
+  /* Determine appropriate breakpoint size for this address.  */
+  bp = memory_breakpoint_from_pc (&addr, &bplen);
+
+  for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+    {
+      if (breakaddr[i] == 0)
+	{
+	  breakaddr[i] = addr;
+	  monitor_read_memory (addr, shadow, bplen);
+	  monitor_printf (current_monitor->set_break, addr);
+	  monitor_expect_prompt (NULL, 0);
+	  return 0;
+	}
+    }
+
+  error ("Too many breakpoints (> %d) for monitor.", NUM_MONITOR_BREAKPOINTS);
+}
+
+/* Tell the monitor to remove a breakpoint.  */
+
+static int
+monitor_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+  RDEBUG(("MON rmbkpt %08x\n",addr))
+  if (current_monitor->clr_break == NULL)
+    error ("No clr_break defined for this monitor");
+
+  if (current_monitor->flags & MO_ADDR_BITS_REMOVE)
+    addr = ADDR_BITS_REMOVE (addr);
+
+  for (i = 0; i < NUM_MONITOR_BREAKPOINTS; i++)
+    {
+      if (breakaddr[i] == addr)
+	{
+	  breakaddr[i] = 0;
+	  /* some monitors remove breakpoints based on the address */
+	  if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR)
+	    monitor_printf (current_monitor->clr_break, addr);
+	  else if (current_monitor->flags & MO_CLR_BREAK_1_BASED)
+	    monitor_printf (current_monitor->clr_break, i + 1);
+	  else
+	    monitor_printf (current_monitor->clr_break, i);
+	  monitor_expect_prompt (NULL, 0);
+	  return 0;
+	}
+    }
+  fprintf_unfiltered (gdb_stderr,
+		      "Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+/* monitor_wait_srec_ack -- wait for the target to send an acknowledgement for
+   an S-record.  Return non-zero if the ACK is received properly.  */
+
+static int
+monitor_wait_srec_ack ()
+{
+  int i, ch;
+
+  if (current_monitor->flags & MO_SREC_ACK_PLUS)
+    {
+      return (readchar (timeout) == '+');
+    }
+  else if (current_monitor->flags & MO_SREC_ACK_ROTATE)
+    {
+      /* Eat two backspaces, a "rotating" char (|/-\), and a space.  */
+      if ((ch = readchar (1)) < 0)
+	return 0;
+      if ((ch = readchar (1)) < 0)
+	return 0;
+      if ((ch = readchar (1)) < 0)
+	return 0;
+      if ((ch = readchar (1)) < 0)
+	return 0;
+    }
+  return 1;
+}
+
+/* monitor_load -- download a file. */
+
+static void
+monitor_load (file, from_tty)
+    char *file;
+    int  from_tty;
+{
+  dcache_flush (remote_dcache);
+  RDEBUG(("MON load\n"))
+
+  if (current_monitor->load_routine)
+    current_monitor->load_routine (monitor_desc, file, hashmark);
+  else
+    {				/* The default is ascii S-records */
+      int n;
+      unsigned long load_offset;
+      char buf[128];
+
+      /* enable user to specify address for downloading as 2nd arg to load */
+      n = sscanf (file, "%s 0x%lx", buf, &load_offset);
+      if (n > 1)
+	file = buf;
+      else
+	load_offset = 0;
+
+      monitor_printf (current_monitor->load);
+      if (current_monitor->loadresp)
+	monitor_expect (current_monitor->loadresp, NULL, 0);
+
+      load_srec (monitor_desc, file, (bfd_vma) load_offset,
+		 32, SREC_ALL, hashmark,
+		 current_monitor->flags & MO_SREC_ACK ?
+		   monitor_wait_srec_ack : NULL);
+
+      monitor_expect_prompt (NULL, 0);
+    }
+
+/* Finally, make the PC point at the start address */
+
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;		/* No process now */
+
+/* This is necessary because many things were based on the PC at the time that
+   we attached to the monitor, which is no longer valid now that we have loaded
+   new code (and just changed the PC).  Another way to do this might be to call
+   normal_stop, except that the stack may not be valid, and things would get
+   horribly confused... */
+
+  clear_symtab_users ();
+}
+
+static void
+monitor_stop ()
+{
+  RDEBUG(("MON stop\n")) ;
+  if ((current_monitor->flags & MO_SEND_BREAK_ON_STOP) != 0)
+    SERIAL_SEND_BREAK (monitor_desc);
+  if (current_monitor->stop)
+    monitor_printf_noecho (current_monitor->stop);
+}
+
+/* Put a command string, in args, out to MONITOR.  Output from MONITOR
+   is placed on the users terminal until the prompt is seen. FIXME: We
+   read the characters ourseleves here cause of a nasty echo.  */
+
+static void
+monitor_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *p;
+  int resp_len;
+  char buf[1000];
+
+  if (monitor_desc == NULL)
+    error ("monitor target not open.");
+
+  p = current_monitor->prompt;
+
+  /* Send the command.  Note that if no args were supplied, then we're
+     just sending the monitor a newline, which is sometimes useful.  */
+
+  monitor_printf ("%s\r", (args ? args : ""));
+
+  resp_len = monitor_expect_prompt (buf, sizeof buf);
+
+  fputs_unfiltered (buf, gdb_stdout); /* Output the response */
+}
+
+/* Convert hex digit A to a number.  */
+
+#if 0
+static int
+from_hex (a)
+     int a;
+{  
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  if (a >= 'A' && a <= 'F')
+    return a - 'A' + 10;
+
+  error ("Reply contains invalid hex digit 0x%x", a);
+}
+#endif
+
+char *
+monitor_get_dev_name ()
+{
+  return dev_name;
+}
+
+static struct target_ops monitor_ops;
+
+static void
+init_base_monitor_ops (void)
+{
+  monitor_ops.to_shortname = NULL;
+  monitor_ops.to_longname = NULL;
+  monitor_ops.to_doc = NULL;
+  monitor_ops.to_open = NULL;
+  monitor_ops.to_close = monitor_close;
+  monitor_ops.to_attach = NULL;
+  monitor_ops.to_post_attach = NULL;
+  monitor_ops.to_require_attach = NULL;
+  monitor_ops.to_detach = monitor_detach;
+  monitor_ops.to_require_detach = NULL;
+  monitor_ops.to_resume = monitor_resume;
+  monitor_ops.to_wait = monitor_wait;
+  monitor_ops.to_post_wait = NULL;
+  monitor_ops.to_fetch_registers = monitor_fetch_registers;
+  monitor_ops.to_store_registers = monitor_store_registers;
+  monitor_ops.to_prepare_to_store = monitor_prepare_to_store;
+  monitor_ops.to_xfer_memory = monitor_xfer_memory;
+  monitor_ops.to_files_info = monitor_files_info;
+  monitor_ops.to_insert_breakpoint = monitor_insert_breakpoint;
+  monitor_ops.to_remove_breakpoint = monitor_remove_breakpoint;
+  monitor_ops.to_terminal_init = 0;
+  monitor_ops.to_terminal_inferior = 0;
+  monitor_ops.to_terminal_ours_for_output = 0;
+  monitor_ops.to_terminal_ours = 0;
+  monitor_ops.to_terminal_info = 0;
+  monitor_ops.to_kill = monitor_kill;
+  monitor_ops.to_load = monitor_load;
+  monitor_ops.to_lookup_symbol = 0;
+  monitor_ops.to_create_inferior = monitor_create_inferior;
+  monitor_ops.to_post_startup_inferior = NULL;
+  monitor_ops.to_acknowledge_created_inferior = NULL;
+  monitor_ops.to_clone_and_follow_inferior = NULL;
+  monitor_ops.to_post_follow_inferior_by_clone = NULL;
+  monitor_ops.to_insert_fork_catchpoint = NULL;
+  monitor_ops.to_remove_fork_catchpoint = NULL;
+  monitor_ops.to_insert_vfork_catchpoint = NULL;
+  monitor_ops.to_remove_vfork_catchpoint = NULL;
+  monitor_ops.to_has_forked = NULL;
+  monitor_ops.to_has_vforked = NULL;
+  monitor_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  monitor_ops.to_post_follow_vfork = NULL;
+  monitor_ops.to_insert_exec_catchpoint = NULL;
+  monitor_ops.to_remove_exec_catchpoint = NULL;
+  monitor_ops.to_has_execd = NULL;
+  monitor_ops.to_reported_exec_events_per_exec_call = NULL;
+  monitor_ops.to_has_exited = NULL;
+  monitor_ops.to_mourn_inferior = monitor_mourn_inferior;
+  monitor_ops.to_can_run = 0;
+  monitor_ops.to_notice_signals = 0;
+  monitor_ops.to_thread_alive = 0;
+  monitor_ops.to_stop = monitor_stop;
+  monitor_ops.to_pid_to_exec_file = NULL;
+  monitor_ops.to_core_file_to_sym_file = NULL;
+  monitor_ops.to_stratum = process_stratum;
+  monitor_ops.DONT_USE = 0;
+  monitor_ops.to_has_all_memory = 1;
+  monitor_ops.to_has_memory = 1;
+  monitor_ops.to_has_stack = 1;
+  monitor_ops.to_has_registers = 1;
+  monitor_ops.to_has_execution = 1;
+  monitor_ops.to_sections = 0;
+  monitor_ops.to_sections_end = 0;
+  monitor_ops.to_magic = OPS_MAGIC;
+} /* init_base_monitor_ops */
+
+/* Init the target_ops structure pointed at by OPS */
+
+void
+init_monitor_ops (ops)
+     struct target_ops *ops;
+{
+  if (monitor_ops.to_magic != OPS_MAGIC)
+    init_base_monitor_ops ();
+
+  memcpy (ops, &monitor_ops, sizeof monitor_ops);
+}
+
+/* Define additional commands that are usually only used by monitors.  */
+
+void
+_initialize_remote_monitors ()
+{
+  init_base_monitor_ops ();
+  add_show_from_set (add_set_cmd ("hash", no_class, var_boolean,
+                                  (char *)&hashmark,
+				  "Set display of activity while downloading a file.\n\
+When enabled, a hashmark \'#\' is displayed.",
+                                  &setlist),
+		     &showlist);
+
+  add_com ("monitor", class_obscure, monitor_command,
+	   "Send a command to the debug monitor."); 
+}
+
+
diff --git a/gdb/monitor.h b/gdb/monitor.h
new file mode 100644
index 0000000..4ccddd5
--- /dev/null
+++ b/gdb/monitor.h
@@ -0,0 +1,247 @@
+/* Definitions for remote debugging interface for ROM monitors.
+    Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
+    Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+  
+   This file is part of GDB.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+  
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+#include "serial.h"
+
+/* This structure describes the strings necessary to give small command
+   sequences to the monitor, and parse the response.
+
+   CMD is the actual command typed at the monitor.  Usually this has
+   embedded sequences ala printf, which are substituted with the
+   arguments appropriate to that type of command.  Ie: to examine a
+   register, we substitute the register name for the first arg.  To
+   modify memory, we substitute the memory location and the new
+   contents for the first and second args, etc...
+
+   RESP_DELIM used to home in on the response string, and is used to
+   disambiguate the answer within the pile of text returned by the
+   monitor.  This should be a unique string that immediately precedes
+   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
+   response to asking for the PC, you should use `: ' as the
+   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
+   be ignored, or has no particular leading text.
+
+   TERM is the string that the monitor outputs to indicate that it is
+   idle, and waiting for input.  This is usually a prompt of some
+   sort.  In the previous example, it would be `= '.  It is important
+   that TERM really means that the monitor is idle, otherwise GDB may
+   try to type at it when it isn't ready for input.  This is a problem
+   because many monitors cannot deal with type-ahead.  TERM may be
+   NULL if the normal prompt is output.
+
+   TERM_CMD is used to quit out of the subcommand mode and get back to
+   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
+   will also be ignored if TERM is NULL.  */
+
+struct memrw_cmd
+{
+  char *cmdb;			/* Command to send for byte read/write */
+  char *cmdw;			/* Command for word (16 bit) read/write */
+  char *cmdl;			/* Command for long (32 bit) read/write */
+  char *cmdll;			/* Command for long long (64 bit) read/write */
+  char *resp_delim;		/* String just prior to the desired value */
+  char *term;			/* Terminating string to search for */
+  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
+};
+
+struct regrw_cmd
+{
+  char *cmd;			/* Command to send for reg read/write */
+  char *resp_delim;		/* String (actually a regexp if getmem) just
+				   prior to the desired value */
+  char *term;			/* Terminating string to search for */
+  char *term_cmd;		/* String to get out of sub-mode (if necessary) */
+};
+
+struct monitor_ops
+{
+  int flags;			/* See below */
+  char **init;			/* List of init commands.  NULL terminated. */
+  char *cont;			/* continue command */
+  char *step;			/* single step */
+  char *stop;			/* Interrupt program string */
+  char *set_break;		/* set a breakpoint */
+  char *clr_break;		/* clear a breakpoint */
+  char *clr_all_break;		/* Clear all breakpoints */
+  char *fill;			/* Memory fill cmd (addr len val) */
+  struct memrw_cmd setmem;	/* set memory to a value */
+  struct memrw_cmd getmem;	/* display memory */
+  struct regrw_cmd setreg;	/* set a register */
+  struct regrw_cmd getreg;	/* get a register */
+				/* Some commands can dump a bunch of registers
+				   at once.  This comes as a set of REG=VAL
+				   pairs.  This should be called for each pair
+				   of registers that we can parse to supply
+				   GDB with the value of a register.  */
+  char *dump_registers;		/* Command to dump all regs at once */
+  char *register_pattern;	/* Pattern that picks out register from reg dump */
+  void (*supply_register) PARAMS ((char *name, int namelen,
+				   char *val, int vallen));
+  void (*load_routine) PARAMS ((serial_t desc, char *file,
+				int hashmark)); /* Download routine */
+  int (*dumpregs) PARAMS((void)) ;    /* routine to dump all registers */
+  int (*continue_hook) PARAMS((void)) ; /* Emit the continue command */
+  int (*wait_filter) PARAMS((char * buf, /* Maybe contains registers */
+			    int bufmax ,
+			    int * response_length,
+			    struct target_waitstatus * status)) ;
+  char *load;			/* load command */
+  char *loadresp;		/* Response to load command */
+  char *prompt;			/* monitor command prompt */
+  char *line_term;		/* end-of-command delimitor */
+  char *cmd_end;		/* optional command terminator */
+  struct target_ops *target;	/* target operations */
+  int stopbits;			/* number of stop bits */
+  char **regnames;		/* array of register names in ascii */
+  int magic;			/* Check value */
+};
+
+/* The monitor ops magic number, used to detect if an ops structure doesn't
+   have the right number of entries filled in. */
+
+#define MONITOR_OPS_MAGIC 600925
+
+/* Flag definitions. */
+
+/* If set, then clear breakpoint command uses address, otherwise it
+   uses an index returned by the monitor.  */
+
+#define MO_CLR_BREAK_USES_ADDR 0x1
+
+/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
+   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
+
+#define MO_FILL_USES_ADDR 0x2
+
+/* If set, then monitor doesn't automatically supply register dump
+   when coming back after a continue.  */
+
+#define MO_NEED_REGDUMP_AFTER_CONT 0x4
+
+/* getmem needs start addr and end addr */
+
+#define MO_GETMEM_NEEDS_RANGE 0x8
+
+/* getmem can only read one loc at a time */
+
+#define MO_GETMEM_READ_SINGLE 0x10
+
+/* handle \r\n combinations */
+
+#define MO_HANDLE_NL 0x20
+
+/* don't expect echos in monitor_open */
+
+#define MO_NO_ECHO_ON_OPEN 0x40
+
+/* If set, send break to stop monitor */
+
+#define MO_SEND_BREAK_ON_STOP 0x80
+
+/* If set, target sends an ACK after each S-record */
+
+#define MO_SREC_ACK 0x100
+
+/* Allow 0x prefix on addresses retured from monitor */
+
+#define MO_HEX_PREFIX 0x200
+
+/* Some monitors require a different command when starting a program */
+
+#define MO_RUN_FIRST_TIME 0x400
+
+/* Don't expect echos when getting memory */
+
+#define MO_NO_ECHO_ON_SETMEM 0x800
+
+/* If set, then register store command expects value BEFORE regname */
+
+#define MO_REGISTER_VALUE_FIRST 0x1000
+
+/* If set, then the monitor displays registers as pairs.  */
+
+#define MO_32_REGS_PAIRED 0x2000
+
+/* If set, then register setting happens interactively.  */
+
+#define MO_SETREG_INTERACTIVE 0x4000
+
+/* If set, then memory setting happens interactively.  */
+
+#define MO_SETMEM_INTERACTIVE 0x8000
+
+/* If set, then memory dumps are always on 16-byte boundaries, even
+   when less is desired.  */
+
+#define MO_GETMEM_16_BOUNDARY 0x10000
+
+/* If set, then the monitor numbers its breakpoints starting from 1.  */
+
+#define MO_CLR_BREAK_1_BASED 0x20000
+
+/* If set, then the monitor acks srecords with a plus sign.  */
+
+#define MO_SREC_ACK_PLUS 0x40000
+
+/* If set, then the monitor "acks" srecords with rotating lines.  */
+
+#define MO_SREC_ACK_ROTATE 0x80000
+
+/* If set, then remove useless address bits from memory addresses.  */
+
+#define MO_ADDR_BITS_REMOVE 0x100000
+
+/* If set, then display target program output if prefixed by ^O.  */
+
+#define MO_PRINT_PROGRAM_OUTPUT 0x200000
+
+/* Some dump bytes commands align the first data with the preceeding
+16 byte boundary. Some print blanks and start at the exactly the
+requested boundary. */
+
+#define MO_EXACT_DUMPADDR 0x400000
+
+/* Rather entering and exiting the write memory dialog for each word byte,
+   we can save time by transferring the whole block without exiting
+   the memory editing mode. You only need to worry about this
+   if you are doing memory downloading.
+   This engages a new write function registered with dcache.
+   */
+#define MO_HAS_BLOCKWRITES 0x800000
+
+#define SREC_SIZE 160
+
+extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
+				  int from_tty));
+extern void monitor_close PARAMS ((int quitting));
+extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
+extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
+extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
+extern void monitor_printf PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+extern void monitor_printf_noecho PARAMS ((char *, ...))
+     ATTR_FORMAT(printf, 1, 2);
+extern void monitor_write PARAMS ((char *buf, int buflen));
+extern int monitor_readchar PARAMS ((void));
+extern char *monitor_get_dev_name PARAMS ((void));
+extern void init_monitor_ops PARAMS ((struct target_ops *));
+extern int monitor_dump_reg_block PARAMS((char * dump_cmd)) ;
+extern void flush_monitor_dcache PARAMS ((void));
diff --git a/gdb/mpw-config.in b/gdb/mpw-config.in
new file mode 100644
index 0000000..ed07878
--- /dev/null
+++ b/gdb/mpw-config.in
@@ -0,0 +1,81 @@
+# Configuration fragment for GDB.
+
+If "{host_canonical}" =~ /m68k-apple-mpw/
+	forward-include "{srcdir}"config:m68k:xm-mpw.h xm.h
+	Set siow_lib '"{Libraries}"SIOW.o'
+
+Else If "{host_canonical}" =~ /powerpc-apple-mpw/
+	forward-include "{srcdir}"config:powerpc:xm-mpw.h xm.h
+	Set siow_lib '"{PPCLibraries}"PPCSIOW.o'
+
+End If
+
+Set xdepfiles '"{o}"mac-xdep.c.o'
+
+Set enable_cflags ""
+
+# Make a copy of this file and give it a different name, so it
+# won't be confused with GDB's serial.h.
+
+Duplicate -y "{CIncludes}"Serial.h MacSerial.h
+
+Echo "/* dummy */" >termio.h
+
+If "{target_canonical}" =~ /m68k-apple-macos/
+	forward-include "{srcdir}"config:m68k:tm-mac.h tm.h
+	forward-include "{srcdir}"config:m68k:tm-m68k.h 'm68k/tm-m68k.h'
+	Set tdepfiles '"{o}"m68k-tdep.c.o'
+
+Else If "{target_canonical}" =~ /powerpc-apple-macos/
+	forward-include "{srcdir}"config:powerpc:tm-macos.h tm.h
+	forward-include "{srcdir}"config:rs6000:tm-rs6000.h 'rs6000/tm-rs6000.h'
+	Set tdepfiles '"{o}"rs6000-tdep.c.o "{o}"xcoffread.c.o'
+
+Else If "{target_canonical}" =~ /i386-unknown-go32/
+	forward-include "{srcdir}"config:i386:tm-i386v.h tm.h
+	Set tdepfiles '"{o}"i386-tdep.c.o'
+
+Else If "{target_canonical}" =~ /mips-idt-ecoff/
+	forward-include "{srcdir}"config:mips:tm-embed.h tm.h
+	forward-include "{srcdir}"config:mips:tm-bigmips.h 'mips/tm-bigmips.h'
+	forward-include "{srcdir}"config:mips:tm-mips.h 'mips/tm-mips.h'
+	Set tdepfiles '"{o}"mips-tdep.c.o "{o}"remote-mips.c.o'
+
+Else If "{target_canonical}" =~ /sh-hitachi-hms/
+	forward-include "{srcdir}"config:sh:tm-sh.h tm.h
+	Set tdepfiles '"{o}"sh-tdep.c.o'
+
+End If
+
+If "{target_canonical}" =~ /m68k-apple-macos/
+	forward-include "{srcdir}"config:m68k:nm-macos.h nm.h
+	Set natdepfiles '"{o}"mac-nat.c.o'
+
+Else If "{target_canonical}" =~ /powerpc-apple-macos/
+	forward-include "{srcdir}"config:powerpc:nm-macos.h nm.h
+	Set natdepfiles '"{o}"mac-nat.c.o'
+
+Else
+	forward-include "{srcdir}"config:nm-empty.h nm.h
+	Set natdepfiles ' '
+
+End If
+
+Echo '# From mpw-config.in'				 > "{o}"mk.tmp
+Echo "TDEPFILES = " {tdepfiles}				>> "{o}"mk.tmp
+Echo "XDEPFILES = " {xdepfiles}				>> "{o}"mk.tmp
+Echo "NATDEPFILES = " {natdepfiles}			>> "{o}"mk.tmp
+Echo "XM_ADD_FILES = "					>> "{o}"mk.tmp
+Echo "TM_ADD_FILES = "					>> "{o}"mk.tmp
+Echo "NAT_ADD_FILES = "					>> "{o}"mk.tmp
+Echo "XM_CDEPS = "					>> "{o}"mk.tmp
+Echo "TM_CDEPS = "					>> "{o}"mk.tmp
+Echo "NAT_CDEPS = "					>> "{o}"mk.tmp
+Echo "SIOW_LIB = " {siow_lib}				>> "{o}"mk.tmp
+Echo "ENABLE_CFLAGS = " {enable_cflags}			>> "{o}"mk.tmp
+Echo '# End from mpw-config.in'				>> "{o}"mk.tmp
+
+Echo '/* config.h.  Generated by mpw-configure.  */'	 > "{o}"config.new
+Echo '#include "mpw.h"'					>> "{o}"config.new
+
+MoveIfChange "{o}"config.new "{o}"config.h
diff --git a/gdb/mpw-make.sed b/gdb/mpw-make.sed
new file mode 100644
index 0000000..ce6a9ec
--- /dev/null
+++ b/gdb/mpw-make.sed
@@ -0,0 +1,178 @@
+# Sed commands that finish translating the GDB Unix Makefile to MPW syntax.
+
+/^host_alias =/s/^/#/
+/^target_alias =/s/^/#/
+
+/^host_makefile_frag@$/d
+/^target_makefile_frag@$/d
+
+/@ENABLE_CFLAGS@/s/@ENABLE_CFLAGS@/{ENABLE_CFLAGS}/g
+/^ENABLE_CFLAGS=/s/^/#/
+
+# Edit all the symbolic definitions pointing to various libraries and such.
+
+/^INCLUDE_DIR = /s/"{srcdir}":include/"{topsrcdir}"include:/
+
+/^MMALLOC_DIR = /s/::mmalloc/mmalloc:/
+/^MMALLOC_SRC = /s/"{srcdir}"/"{topsrcdir}"/
+/^MMALLOC =/s/=.*$/=/
+/MMALLOC_CFLAGS =/s/=.*$/= -u USE_MMALLOC/
+
+/^BFD_DIR = /s/::bfd/bfd:/
+/^BFD = /s/{BFD_DIR}:libbfd/{BFD_DIR}libbfd/
+/^BFD_SRC = /s/"{srcdir}"/"{topsrcdir}"/
+
+/^READLINE_DIR = /s/::readline/readline:/
+/^READLINE =/s/=.*$/=/
+/^READLINE_SRC = /s/"{srcdir}"/"{topsrcdir}"/
+
+/^INCLUDE_CFLAGS = /s/$/ -i "{topsrcdir}"include:mpw: -i ::extra-include:/
+
+/^SER_HARDWIRE =/s/ser-unix/ser-mac/
+
+/^TERMCAP =/s/ =.*$/ =/
+
+# Whack out various autoconf vars that we don't need.
+/@CONFIG_LDFLAGS@/s/@CONFIG_LDFLAGS@//g
+/@HLDFLAGS@/s/@HLDFLAGS@//g
+/@DEFS@/s/@DEFS@//g
+/@YACC@/s/@YACC@/byacc/g
+/@ENABLE_OBS@/s/@ENABLE_OBS@//g
+/@ENABLE_CLIBS@/s/@ENABLE_CLIBS@//g
+/@LIBS@/s/@LIBS@//g
+
+# Whack out autoconf hook for thread debugging.
+/@THREAD_DB_OBS@/s/@THREAD_DB_OBS@//g
+
+# Fix up paths to include directories.
+/INCLUDE_DIR/s/"{s}"{INCLUDE_DIR}/{INCLUDE_DIR}/g
+/INCLUDE_DIR/s/{INCLUDE_DIR}:/{INCLUDE_DIR}/g
+/INCLUDE_DIR/s/"{INCLUDE_DIR}":/"{INCLUDE_DIR}"/g
+
+/{BFD_DIR}/s/"{BFD_DIR}":/"{BFD_DIR}"/g
+/{BFD_DIR}/s/\([ 	]\){BFD_DIR}/\1::{BFD_DIR}/g
+/{BFD_DIR}/s/\([ 	]\)"{BFD_DIR}"/\1::"{BFD_DIR}"/g
+
+/{BFD_SRC}/s/"{s}"{BFD_SRC}/{BFD_SRC}/g
+/{BFD_SRC}/s/{BFD_SRC}:/{BFD_SRC}/g
+
+/{READLINE_SRC}/s/"{s}"{READLINE_SRC}/{READLINE_SRC}/g
+
+/^readline_headers =/,/^$/c\
+readline_headers =\
+
+
+# This isn't really useful, and seems to cause nonsensical complaints.
+/{ALLDEPFILES}/s/{ALLDEPFILES}//g
+
+/^copying.c \\Option-f /,/^$/d
+
+# Fix the syntax of bits of C code that go into version.c.
+/char /s/'char .Option-x/'char */
+
+# Point at files in the obj dir rather than src dir.
+/version/s/"{s}"version\.c/"{o}"version.c/g
+/version/s/^version\.c/"{o}"version.c/
+/config/s/"{s}"config\.h/"{o}"config.h/g
+/config/s/^config\.h/"{o}"config.h/
+/xm/s/"{s}"xm\.h/"{o}"xm.h/g
+/xm/s/^xm\.h/"{o}"xm.h/
+/tm/s/"{s}"tm\.h/"{o}"tm.h/g
+/tm/s/^tm\.h/"{o}"tm.h/
+/nm/s/"{s}"nm\.h/"{o}"nm.h/g
+/nm/s/^nm\.h/"{o}"nm.h/
+
+/exp.tab.c/s/"{s}"\([a-z0-9]*\)-exp\.tab\.c/"{o}"\1-exp.tab.c/g
+/exp.tab.c/s/^\([a-z0-9]*\)-exp\.tab\.c/"{o}"\1-exp.tab.c/
+
+/y.tab/s/"{s}"y.tab\.c/"{o}"y.tab.c/g
+/y.tab/s/^y.tab\.c/"{o}"y.tab.c/
+
+/init/s/"{s}"init\.c-tmp/"{o}"init.c-tmp/g
+/init/s/^init\.c-tmp/"{o}"init.c-tmp/
+/init/s/"{s}"init\.c/"{o}"init.c/g
+/init/s/^init\.c/"{o}"init.c/
+
+# Fix up the generation of version.c.
+/"{o}"version.c \\Option-f Makefile/,/^$/c\
+"{o}"version.c \\Option-f Makefile\
+	echo -n 'char *version = "'	 >"{o}"version.c\
+	echo -n "{VERSION}"		>>"{o}"version.c\
+	echo '";'			>>"{o}"version.c\
+	echo -n 'char *host_name = "'	>>"{o}"version.c\
+	echo -n "{host_alias}"		>>"{o}"version.c\
+	echo '";'			>>"{o}"version.c\
+	echo -n 'char *target_name = "'	>>"{o}"version.c\
+	echo -n "{target_alias}"	>>"{o}"version.c\
+	echo '";'			>>"{o}"version.c\
+
+
+/ansidecl/s/include "{s}""ansidecl.h"/include "ansidecl.h"/
+
+# Open-brace in a command causes much confusion; replace with the
+# result from a script.
+/initialize_all_files ()/c\
+	Echo -n 'void initialize_all_files () ' >> "{o}"init.c-tmp\
+	open-brace >> "{o}"init.c-tmp
+
+# Replace the whole sed bit for init.c; it's simpler that way...
+/echo {OBS} {TSOBS}/,/echo '}'/c\
+	For i in {OBS} {TSOBS}\
+          Set filename "`Echo {i} | sed \\Option-d\
+            -e '/^Onindy.c.o/d' \\Option-d\
+            -e '/^nindy.c.o/d' \\Option-d\
+            -e '/ttyflush.c.o/d' \\Option-d\
+            -e '/xdr_ld.c.o/d' \\Option-d\
+            -e '/xdr_ptrace.c.o/d' \\Option-d\
+            -e '/xdr_rdb.c.o/d' \\Option-d\
+            -e '/udr.c.o/d' \\Option-d\
+            -e '/udip2soc.c.o/d' \\Option-d\
+            -e '/udi2go32.c.o/d' \\Option-d\
+            -e '/version.c.o/d' \\Option-d\
+            -e '/[a-z0-9A-Z_]*-exp.tab.c.o/d' \\Option-d\
+            -e 's/\\.c\\.o/.c/' \\Option-d\
+            -e 's/^://'`"\
+          If "{filename}" != ""\
+            sed <"{s}""{filename}" >>"{o}"init.c-tmp -n \\Option-d\
+            -e '/^_initialize_[a-z_0-9A-Z]* *(/s/^\\([a-z_0-9A-Z]*\\).*/  {extern void \\1 (); \\1 ();}/p'\
+          End If\
+	End For\
+	Echo '}' >>"{o}"init.c-tmp
+
+# Fix the main compile/link command.
+/{CC_LD} {INTERNAL_LDFLAGS} -o gdb/,/"{o}"init.c.o {OBS} {TSOBS} {ADD_FILES} {CLIBS} {LOADLIBES}/c\
+	{CC_LD} {INTERNAL_LDFLAGS} -o gdb{PROG_EXT} "{o}"init.c.o {OBS} {TSOBS} {ADD_FILES} {CLIBS} {LOADLIBES} {EXTRALIBS}\
+	{MAKEPEF} gdb{PROG_EXT} -o gdb {MAKEPEF_TOOL_FLAGS} {MAKEPEF_FLAGS}\
+	{REZ} "{s}"mac-gdb.r -o gdb -append -d PROG_NAME='"'gdb'"' -d VERSION_STRING='"'{version}'"'\
+
+# Replace the install actions with MPW-friendly script.
+/^install \\Option-f /,/^$/c\
+install \\Option-f all install-only\
+\
+install-only \\Option-f \
+	NewFolderRecursive "{bindir}"\
+	Duplicate -y gdb "{bindir}"gdb\
+	If "`Exists SiowGDB`" != ""\
+		Duplicate -y SiowGDB "{bindir}"SiowGDB\
+	End If\
+
+
+# Don't do any recursive subdir stuff.
+/ subdir_do/s/{MAKE}/null-command/
+
+# Edit out actions that only confuse MPW Make.
+/^config.status \\Option-f/,/^$/d
+/^Makefile \\Option-f/,/^$/d
+
+# Don't test config.h dependencies.
+/^"{o}"config.h \\Option-f/s/^/#/
+
+# Add an action to build SIOWgdb.
+$a\
+SIOWgdb \\Option-f {OBS} {TSOBS} {ADD_DEPS} {CDEPS} "{o}"init.c.o\
+	Delete -i -y SIOWgdb\
+	{CC_LD} {INTERNAL_LDFLAGS} -t 'APPL' -c 'gdb ' -o SIOWgdb{PROG_EXT} "{o}"init.c.o {OBS} {TSOBS} {ADD_FILES} {CLIBS} {SIOW_LIB} {LOADLIBES} {EXTRALIBS}\
+	{MAKEPEF} SIOWgdb{PROG_EXT} -o SIOWgdb -ft 'APPL' -fc 'gdb ' {MAKEPEF_FLAGS} \
+	{REZ} -o SIOWgdb "{RIncludes}"siow.r -append -d __kPrefSize=5000 -d __kMinSize=2000 -d APPNAME='"'SIOWgdb'"' \
+	{REZ} "{s}"mac-gdb.r -o SIOWgdb -append -d VERSION_STRING='"'{version}'"'\
+
diff --git a/gdb/msg.defs b/gdb/msg.defs
new file mode 100644
index 0000000..7c9fcd1
--- /dev/null
+++ b/gdb/msg.defs
@@ -0,0 +1 @@
+#include <hurd/msg.defs>
diff --git a/gdb/msg_reply.defs b/gdb/msg_reply.defs
new file mode 100644
index 0000000..049bfa8
--- /dev/null
+++ b/gdb/msg_reply.defs
@@ -0,0 +1 @@
+#include <hurd/msg_reply.defs>
diff --git a/gdb/news-xdep.c b/gdb/news-xdep.c
new file mode 100644
index 0000000..7f57aeb
--- /dev/null
+++ b/gdb/news-xdep.c
@@ -0,0 +1,65 @@
+/* Low level interface to ptrace, for GDB when running under Unix.
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __GNUC__
+/* Bad implement execle(3). It's depend for "/bin/cc".
+
+   main()
+   {
+     printf("execle:\n");
+     execle(FILE, ARGS, envp);
+     exit(1);
+   }
+
+   GCC:
+   link a6,#0
+   pea LC5	; call printf
+   jbsr _printf
+   ;		; (not popd stack)
+   pea _envp	; call execle
+   clrl sp@-
+   pea LC4
+   pea LC4
+   pea LC4
+   pea LC3
+   pea LC6
+   jbsr _execle
+   addw #32,sp	; delayed pop !!
+
+   /bin/cc:
+   link.l	fp,#L23
+   movem.l	#L24,(sp)
+   pea	L26		; call printf
+   jbsr	_printf
+   addq.l	#4,sp	; <--- popd stack !!
+   pea	_envp		; call execle
+   clr.l	-(sp)
+   pea	L32
+   
+   */
+
+execle(name, args)
+     char *name, *args;
+{
+  register char	**env = &args;
+  while (*env++)
+    ;
+  execve(name, (char **)&args, (char **)*env);
+}
+#endif
diff --git a/gdb/nindy-share/Makefile b/gdb/nindy-share/Makefile
new file mode 100644
index 0000000..5ec99ba
--- /dev/null
+++ b/gdb/nindy-share/Makefile
@@ -0,0 +1,117 @@
+#Copyright 1992 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+#-----------------------------------------------------------------------------
+# Makefile for toolib.a -- host code shAred by more than one tool
+#-----------------------------------------------------------------------------
+
+RANLIB	= ranlib
+
+# The following lines should be uncommented for system V (i386v).
+#__i386v__#USG = -DUSG
+#__i386v__#SYSV_INCL = ${IPATH}/sysv.h
+#__i386v__#RANLIB = echo >/dev/null
+
+# The following line should be uncommented for HP-UX
+#__hp9000__#USG = -DUSG
+#__hp9000__#SYSV_INCL = ${IPATH}/sysv.h
+#__hp9000__#RANLIB = echo >/dev/null
+
+# Essential under System V, harmless elsewhere
+SHELL = /bin/sh
+
+#'HOST' will be defined in the host-specific makefile by 'make make'
+
+TARG	= toolib.a
+OPT	= -g
+IPATH	= ../../include
+CFLAGS  = ${OPT} ${USG} -I${IPATH} -DHOST=\"${HOST}\"
+OBJS	= coffstrip.o nindy.o ttybreak.o ttyflush.o Onindy.o
+
+${TARG}: ${OBJS} VERSION
+	make ver960.o
+	rm -f ${TARG}
+	ar cvr ${TARG} ${OBJS} ver960.o
+	${RANLIB} ${TARG}
+
+coffstrip.o:	${IPATH}/b.out.h ${IPATH}/coff.h ${IPATH}/sysv.h
+nindy.o:	${IPATH}/block_io.h ${IPATH}/env.h ${IPATH}/sysv.h
+nindy.o:	${IPATH}/ttycntl.h ${IPATH}/wait.h
+ttybreak.o:	${IPATH}/ttycntl.h
+ttyflush.o:	${IPATH}/ttycntl.h
+Onindy.o:	${IPATH}/block_io.h ${IPATH}/env.h ${IPATH}/sysv.h
+Onindy.o:	${IPATH}/ttycntl.h ${IPATH}/wait.h
+
+
+#-----------------------------------------------------------------------------
+#		'STANDARD' GNU/960 TARGETS BELOW THIS POINT
+#
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#-----------------------------------------------------------------------------
+
+ver960.c: FORCE
+	rm -f ver960.c
+	echo "char toolib_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
+
+
+# This target should be invoked before building a new release.
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#
+roll:
+	@V=`cat VERSION`		; \
+	MAJ=`sed 's/\..*//' VERSION`	; \
+	MIN=`sed 's/.*\.//' VERSION`	; \
+	V=$$MAJ.`expr $$MIN + 1`	; \
+	rm -f VERSION			; \
+	echo $$V >VERSION		; \
+	echo Version $$V
+
+# Dummy target to force execution of dependent targets.
+#
+FORCE:
+
+# 'G960BASE' will be defined at invocation
+#
+install:
+	make ${TARG}
+	mv -f ${TARG} ${G960BASE}/lib
+
+clean:
+	rm -f ${TARG} *.o core
+
+# Target to uncomment host-specific lines in this makefile.  Such lines must
+# have the following string beginning in column 1: #__<hostname>__#
+# Original Makefile is backed up as 'Makefile.old'.
+#
+# Invoke with:  make make HOST=xxx
+#
+make:
+	-@if test $(HOST)x = x ; then \
+		echo 'Specify "make make HOST=???"'; \
+		exit 1; \
+	fi ; \
+	grep -s "^#The next line was generated by 'make make'" Makefile; \
+	if test $$? = 0 ; then	\
+		echo "Makefile has already been processed with 'make make'";\
+		exit 1; \
+	fi ; \
+	mv -f Makefile Makefile.old; \
+	echo "#The next line was generated by 'make make'"	 >Makefile ; \
+	echo "HOST=$(HOST)"					>>Makefile ; \
+	echo							>>Makefile ; \
+	sed "s/^#__$(HOST)__#//" < Makefile.old			>>Makefile
diff --git a/gdb/nindy-share/Onindy.c b/gdb/nindy-share/Onindy.c
new file mode 100644
index 0000000..c3724e6
--- /dev/null
+++ b/gdb/nindy-share/Onindy.c
@@ -0,0 +1,743 @@
+/* This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This started out life as code shared between the nindy monitor and
+   GDB.  For various reasons, this is no longer true.  Eventually, it
+   probably should be merged into remote-nindy.c.  */
+
+/******************************************************************************
+ *
+ *	 		NINDY INTERFACE ROUTINES
+ *
+ * This version of the NINDY interface routines supports NINDY versions
+ * 2.13 and older.  The older versions used a hex communication protocol,
+ * instead of the (faster) current binary protocol.   These routines have
+ * been renamed by prepending the letter 'O' to their names, to avoid
+ * conflict with the current version.  The old versions are kept only for
+ * backward compatibility, and well disappear in a future release.
+ *
+ **************************************************************************/
+
+/* Having these in a separate file from nindy.c is really ugly, and should
+   be merged with nindy.c.  */
+
+#include <stdio.h>
+#if 0
+#include <sys/ioctl.h>
+#include <sys/types.h>	/* Needed by file.h on Sys V */
+#include <sys/file.h>
+#include <signal.h>
+#include <sys/stat.h>
+#include <fcntl.h>	/* Needed on Sys V */
+#include "ttycntl.h"
+#endif
+#include "defs.h"
+#include "serial.h"
+
+#include "block_io.h"
+#include "wait.h"
+#include "env.h"
+
+/* Number of bytes that we send to nindy.  I believe this is defined by
+   the protocol (it does not agree with REGISTER_BYTES).  */
+#define OLD_NINDY_REGISTER_BYTES ((36*4) + (4*8))
+
+extern int quiet;	/* 1 => stifle unnecessary messages */
+
+/* tty connected to 960/NINDY board.  */
+extern serial_t nindy_serial;
+
+static OninStrGet();
+
+		/****************************
+		 *                          *
+		 *  MISCELLANEOUS UTILTIES  *
+		 *                          *
+		 ****************************/
+
+
+/******************************************************************************
+ * fromhex:
+ *	Convert a hex ascii digit h to a binary integer
+ ******************************************************************************/
+static
+int
+fromhex( h )
+    int h;
+{
+	if (h >= '0' && h <= '9'){
+		h -= '0';
+	} else if (h >= 'a' && h <= 'f'){
+		h -= 'a' - 10;
+	} else {
+		h = 0;
+	}
+	return (h & 0xff);
+}
+
+
+/******************************************************************************
+ * hexbin:
+ *	Convert a string of ASCII hex digits to a string of binary bytes.
+ ******************************************************************************/
+static
+hexbin( n, hexp, binp )
+    int n;		/* Number of bytes to convert (twice this many digits)*/
+    char *hexp;		/* Get hex from here		*/
+    char *binp;		/* Put binary here		*/
+{
+	while ( n-- ){
+		*binp++ = (fromhex(*hexp) << 4) | fromhex(*(hexp+1));
+		hexp += 2;
+	}
+}
+
+
+/******************************************************************************
+ * binhex:
+ *	Convert a string of binary bytes to a string of ASCII hex digits
+ ******************************************************************************/
+static
+binhex( n, binp, hexp )
+    int n;              /* Number of bytes to convert   */
+    char *binp;         /* Get binary from here         */
+    char *hexp;         /* Place hex here               */
+{
+	static char tohex[] = "0123456789abcdef";
+
+        while ( n-- ){
+                *hexp++ = tohex[ (*binp >> 4) & 0xf ];
+                *hexp++ = tohex[ *binp & 0xf ];
+                binp++;
+        }
+}
+
+/******************************************************************************
+ * byte_order:
+ *	If the host byte order is different from 960 byte order (i.e., the
+ *	host is big-endian), reverse the bytes in the passed value;  otherwise,
+ *	return the passed value unchanged.
+ *
+ ******************************************************************************/
+static
+long
+byte_order( n )
+    long n;
+{
+	long rev;
+	int i;
+	static short test = 0x1234;
+
+	if (*((char *) &test) == 0x12) {
+		/*
+		 * Big-endian host, swap the bytes.
+		 */
+		rev = 0;
+		for ( i = 0; i < sizeof(n); i++ ){
+			rev <<= 8;
+			rev |= n & 0xff;
+			n >>= 8;
+		}
+		n = rev;
+	}
+	return n;
+}
+
+/******************************************************************************
+ * say:
+ *	This is a printf that takes at most two arguments (in addition to the
+ *	format string) and that outputs nothing if verbose output has been
+ *	suppressed.
+ ******************************************************************************/
+static
+say( fmt, arg1, arg2 )
+    char *fmt;
+    int arg1, arg2;
+{
+	if ( !quiet ){
+		printf( fmt, arg1, arg2 );
+		fflush( stdout );
+	}
+}
+
+		/*****************************
+		 *                           *
+		 *  LOW-LEVEL COMMUNICATION  *
+		 *                           *
+		 *****************************/
+
+/* Read a single character from the remote end.  */
+
+static int
+readchar()
+{
+  /* FIXME: Do we really want to be reading without a timeout?  */
+  return SERIAL_READCHAR (nindy_serial, -1);
+}
+
+/******************************************************************************
+ * getpkt:
+ *	Read a packet from a remote NINDY, with error checking, and return
+ *	it in the indicated buffer.
+ ******************************************************************************/
+static
+getpkt (buf)
+     char *buf;
+{
+	unsigned char recv;	/* Checksum received		*/
+	unsigned char csum;	/* Checksum calculated		*/
+	char *bp;		/* Poointer into the buffer	*/
+	int c;
+
+	while (1){
+		csum = 0;
+		bp = buf;
+		/* FIXME: check for error from readchar ().  */
+		while ( (c = readchar()) != '#' ){
+			*bp++ = c;
+			csum += c;
+		}
+		*bp = 0;
+
+		/* FIXME: check for error from readchar ().  */
+		recv = fromhex(readchar()) << 4;
+		recv |= fromhex(readchar());
+		if ( csum == recv ){
+			break;
+		}
+	
+		fprintf(stderr,
+			"Bad checksum (recv=0x%02x; calc=0x%02x); retrying\r\n",
+								recv, csum );
+		SERIAL_WRITE (nindy_serial, "-", 1);
+	}
+
+	SERIAL_WRITE (nindy_serial, "+", 1);
+}
+
+
+/******************************************************************************
+ * putpkt:
+ *	Checksum and send a gdb command to a remote NINDY, and wait for
+ *	positive acknowledgement.
+ *
+ ******************************************************************************/
+static
+putpkt( cmd )
+    char *cmd;	/* Command to be sent, without lead ^P (\020)
+		 * or trailing checksum
+		 */
+{
+	char ack;	/* Response received from NINDY		*/
+	char checksum[4];
+	char *p;
+	unsigned int s;
+	char resend;
+
+	for ( s='\020', p=cmd; *p; p++ ){
+		s += *p;
+	}
+	sprintf( checksum, "#%02x",  s & 0xff );
+
+	/* Send checksummed message over and over until we get a positive ack
+	 */
+	resend = 1;
+	do {
+		if ( resend ) {
+		  SERIAL_WRITE ( nindy_serial, "\020", 1 );
+		  SERIAL_WRITE( nindy_serial, cmd, strlen(cmd) );
+		  SERIAL_WRITE( nindy_serial, checksum, strlen(checksum) );
+		}
+		/* FIXME: do we really want to be reading without timeout?  */
+		ack = SERIAL_READCHAR (nindy_serial, -1);
+		if (ack < 0)
+		  {
+		    fprintf (stderr, "error reading from serial port\n");
+		  }
+		if ( ack == '-' ){
+			fprintf( stderr, "Remote NAK, resending\r\n" );
+			resend = 1;
+		} else if ( ack != '+' ){
+			fprintf( stderr, "Bad ACK, ignored: <%c>\r\n", ack );
+			resend = 0;
+		}
+	} while ( ack != '+' );
+}
+
+
+
+/******************************************************************************
+ * send:
+ *	Send a message to a remote NINDY and return the reply in the same
+ *	buffer (clobbers the input message).  Check for error responses
+ *	as indicated by the second argument.
+ *
+ ******************************************************************************/
+static
+send( buf, ack_required )
+    char *buf;		/* Message to be sent to NINDY; replaced by
+			 *	NINDY's response.
+			 */
+    int ack_required;	/* 1 means NINDY's response MUST be either "X00" (no
+			 *	error) or an error code "Xnn".
+			 * 0 means the it's OK as long as it doesn't
+			 *	begin with "Xnn".
+			 */
+{
+	int errnum;
+	static char *errmsg[] = {
+		"",						/* X00 */
+		"Buffer overflow",				/* X01 */
+		"Unknown command",				/* X02 */
+		"Wrong amount of data to load register(s)",	/* X03 */
+		"Missing command argument(s)",			/* X04 */
+		"Odd number of digits sent to load memory",	/* X05 */
+		"Unknown register name",			/* X06 */
+		"No such memory segment",			/* X07 */
+		"No breakpoint available",			/* X08 */
+		"Can't set requested baud rate",		/* X09 */
+	};
+#	define NUMERRS	( sizeof(errmsg) / sizeof(errmsg[0]) )
+
+	static char err0[] = "NINDY failed to acknowledge command: <%s>\r\n";
+	static char err1[] = "Unknown error response from NINDY: <%s>\r\n";
+	static char err2[] = "Error response %s from NINDY: %s\r\n";
+
+	putpkt (buf);
+	getpkt (buf);
+
+	if ( buf[0] != 'X' ){
+		if ( ack_required ){
+			fprintf( stderr, err0, buf );
+			abort();
+		}
+
+	} else if ( strcmp(buf,"X00") ){
+		sscanf( &buf[1], "%x", &errnum );
+		if ( errnum > NUMERRS ){
+			fprintf( stderr, err1, buf );
+		} else{
+			fprintf( stderr, err2, buf, errmsg[errnum] );
+		}
+		abort();
+	}
+}
+
+		/**********************************
+		 *				  *
+		 *   NINDY INTERFACE ROUTINES	  *
+		 *                            	  *
+		 * ninConnect *MUST* be the first *
+		 * one of these routines called.  *
+		 **********************************/
+
+/******************************************************************************
+ * ninBptDel:
+ *	Ask NINDY to delete the specified type of *hardware* breakpoint at
+ *	the specified address.  If the 'addr' is -1, all breakpoints of
+ *	the specified type are deleted.
+ ******************************************************************************/
+OninBptDel( addr, data )
+    long addr;	/* Address in 960 memory	*/
+    int data;	/* '1' => data bkpt, '0' => instruction breakpoint */
+{
+	char buf[100];
+
+	if ( addr == -1 ){
+		sprintf( buf, "b%c", data ? '1' : '0' );
+	} else {
+		sprintf( buf, "b%c%x", data ? '1' : '0', addr );
+	}
+	return send( buf, 0 );
+}
+
+
+/******************************************************************************
+ * ninBptSet:
+ *	Ask NINDY to set the specified type of *hardware* breakpoint at
+ *	the specified address.
+ ******************************************************************************/
+OninBptSet( addr, data )
+    long addr;	/* Address in 960 memory	*/
+    int data;	/* '1' => data bkpt, '0' => instruction breakpoint */
+{
+	char buf[100];
+
+	sprintf( buf, "B%c%x", data ? '1' : '0', addr );
+	return send( buf, 0 );
+}
+
+/******************************************************************************
+ * ninGdbExit:
+ *	Ask NINDY to leave GDB mode and print a NINDY prompt.
+ *	Since it'll no longer be in GDB mode, don't wait for a response.
+ ******************************************************************************/
+OninGdbExit()
+{
+        putpkt( "E" );
+}
+
+/******************************************************************************
+ * ninGo:
+ *	Ask NINDY to start or continue execution of an application program
+ *	in it's memory at the current ip.
+ ******************************************************************************/
+OninGo( step_flag )
+    int step_flag;	/* 1 => run in single-step mode */
+{
+	putpkt( step_flag ? "s" : "c" );
+}
+
+
+/******************************************************************************
+ * ninMemGet:
+ *	Read a string of bytes from NINDY's address space (960 memory).
+ ******************************************************************************/
+OninMemGet(ninaddr, hostaddr, len)
+     long ninaddr;	/* Source address, in the 960 memory space	*/
+     char *hostaddr;	/* Destination address, in our memory space	*/
+     int len;		/* Number of bytes to read			*/
+{
+  /* How much do we send at a time?  */
+#define OLD_NINDY_MEMBYTES 1024
+	/* Buffer: hex in, binary out		*/
+	char buf[2*OLD_NINDY_MEMBYTES+20];
+
+	int cnt;		/* Number of bytes in next transfer	*/
+
+	for ( ; len > 0; len -= OLD_NINDY_MEMBYTES ){
+		cnt = len > OLD_NINDY_MEMBYTES ? OLD_NINDY_MEMBYTES : len;
+
+		sprintf( buf, "m%x,%x", ninaddr, cnt );
+		send( buf, 0 );
+		hexbin( cnt, buf, hostaddr );
+
+		ninaddr += cnt;
+		hostaddr += cnt;
+	}
+}
+
+
+/******************************************************************************
+ * ninMemPut:
+ *	Write a string of bytes into NINDY's address space (960 memory).
+ ******************************************************************************/
+OninMemPut( destaddr, srcaddr, len )
+     long destaddr;	/* Destination address, in NINDY memory space	*/
+     char *srcaddr;	/* Source address, in our memory space		*/
+     int len;		/* Number of bytes to write			*/
+{
+	char buf[2*OLD_NINDY_MEMBYTES+20];	/* Buffer: binary in, hex out		*/
+	char *p;		/* Pointer into buffer			*/
+	int cnt;		/* Number of bytes in next transfer	*/
+
+	for ( ; len > 0; len -= OLD_NINDY_MEMBYTES ){
+		cnt = len > OLD_NINDY_MEMBYTES ? OLD_NINDY_MEMBYTES : len;
+
+		sprintf( buf, "M%x,", destaddr );
+		p = buf + strlen(buf);
+		binhex( cnt, srcaddr, p );
+		*(p+(2*cnt)) = '\0';
+		send( buf, 1 );
+
+		srcaddr += cnt;
+		destaddr += cnt;
+	}
+}
+
+/******************************************************************************
+ * ninRegGet:
+ *	Retrieve the contents of a 960 register, and return them as a long
+ *	in host byte order.
+ *
+ *	THIS ROUTINE CAN ONLY BE USED TO READ THE LOCAL, GLOBAL, AND
+ *	ip/ac/pc/tc REGISTERS.
+ *
+ ******************************************************************************/
+long
+OninRegGet( regname )
+    char *regname;	/* Register name recognized by NINDY, subject to the
+			 * above limitations.
+			 */
+{
+	char buf[200];
+	long val;
+
+	sprintf( buf, "u%s", regname );
+	send( buf, 0 );
+	hexbin( 4, buf, (char *)&val );
+	return byte_order(val);
+}
+
+/******************************************************************************
+ * ninRegPut:
+ *	Set the contents of a 960 register.
+ *
+ *	THIS ROUTINE CAN ONLY BE USED TO SET THE LOCAL, GLOBAL, AND
+ *	ip/ac/pc/tc REGISTERS.
+ *
+ ******************************************************************************/
+OninRegPut( regname, val )
+    char *regname;	/* Register name recognized by NINDY, subject to the
+			 * above limitations.
+			 */
+    long val;		/* New contents of register, in host byte-order	*/
+{
+	char buf[200];
+
+	sprintf( buf, "U%s,%08x", regname, byte_order(val) );
+	send( buf, 1 );
+}
+
+/******************************************************************************
+ * ninRegsGet:
+ *	Get a dump of the contents of the entire 960 register set.  The
+ *	individual registers appear in the dump in the following order:
+ *
+ *		pfp  sp   rip  r3   r4   r5   r6   r7 
+ *		r8   r9   r10  r11  r12  r13  r14  r15 
+ *		g0   g1   g2   g3   g4   g5   g6   g7 
+ *		g8   g9   g10  g11  g12  g13  g14  fp 
+ *		pc   ac   ip   tc   fp0  fp1  fp2  fp3
+ *
+ *	Each individual register comprises exactly 4 bytes, except for
+ *	fp0-fp3, which are 8 bytes.
+ *
+ * WARNING:
+ *	Each register value is in 960 (little-endian) byte order.
+ *
+ ******************************************************************************/
+OninRegsGet( regp )
+    char *regp;		/* Where to place the register dump */
+{
+	char buf[(2*OLD_NINDY_REGISTER_BYTES)+10];   /* Registers in ASCII hex */
+
+	strcpy( buf, "r" );
+	send( buf, 0 );
+	hexbin( OLD_NINDY_REGISTER_BYTES, buf, regp );
+}
+
+/******************************************************************************
+ * ninRegsPut:
+ *	Initialize the entire 960 register set to a specified set of values.
+ *	The format of the register value data should be the same as that
+ *	returned by ninRegsGet.
+ *
+ * WARNING:
+ *	Each register value should be in 960 (little-endian) byte order.
+ *
+ ******************************************************************************/
+OninRegsPut( regp )
+    char *regp;		/* Pointer to desired values of registers */
+{
+	char buf[(2*OLD_NINDY_REGISTER_BYTES)+10];   /* Registers in ASCII hex */
+
+	buf[0] = 'R';
+	binhex( OLD_NINDY_REGISTER_BYTES, regp, buf+1 );
+	buf[ (2*OLD_NINDY_REGISTER_BYTES)+1 ] = '\0';
+
+	send( buf, 1 );
+}
+
+
+/******************************************************************************
+ * ninReset:
+ *      Ask NINDY to perform a soft reset; wait for the reset to complete.
+ ******************************************************************************/
+OninReset()
+{
+
+	putpkt( "X" );
+	/* FIXME: check for error from readchar ().  */
+	while ( readchar() != '+' ){
+		;
+	}
+}
+
+
+/******************************************************************************
+ * ninSrq:
+ *	Assume NINDY has stopped execution of the 960 application program in
+ *	order to process a host service request (srq).  Ask NINDY for the
+ *	srq arguments, perform the requested service, and send an "srq
+ *	complete" message so NINDY will return control to the application.
+ *
+ ******************************************************************************/
+OninSrq()
+{
+  /* FIXME: Imposes arbitrary limits on lengths of pathnames and such.  */
+	char buf[BUFSIZE];
+	int retcode;
+	unsigned char srqnum;
+	char *p;
+	char *argp;
+	int nargs;
+	int arg[MAX_SRQ_ARGS];
+
+
+	/* Get srq number and arguments
+	 */
+	strcpy( buf, "!" );
+	send( buf, 0 );
+	hexbin( 1, buf, (char *)&srqnum );
+
+	/* Set up array of pointers the each of the individual
+	 * comma-separated args
+	 */
+	nargs=0;
+	argp = p = buf+2;
+        while ( 1 ){
+                while ( *p != ',' && *p != '\0' ){
+                        p++;
+                }
+                sscanf( argp, "%x", &arg[nargs++] );
+                if ( *p == '\0' || nargs == MAX_SRQ_ARGS ){
+                        break;
+                }
+                argp = ++p;
+        }
+
+	/* Process Srq
+	 */
+	switch( srqnum ){
+	case BS_CLOSE:
+		/* args: file descriptor */
+		if ( arg[0] > 2 ){
+			retcode = close( arg[0] );
+		} else {
+			retcode = 0;
+		}
+		break;
+	case BS_CREAT:
+		/* args: filename, mode */
+		OninStrGet( arg[0], buf );
+		retcode = creat(buf,arg[1]);
+		break;
+	case BS_OPEN:
+		/* args: filename, flags, mode */
+		OninStrGet( arg[0], buf );
+		retcode = open(buf,arg[1],arg[2]);
+		break;
+	case BS_READ:
+		/* args: file descriptor, buffer, count */
+		retcode = read(arg[0],buf,arg[2]);
+		if ( retcode > 0 ){
+			OninMemPut( arg[1], buf, retcode );
+		}
+		break;
+	case BS_SEEK:
+		/* args: file descriptor, offset, whence */
+		retcode = lseek(arg[0],arg[1],arg[2]);
+		break;
+	case BS_WRITE:
+		/* args: file descriptor, buffer, count */
+		OninMemGet( arg[1], buf, arg[2] );
+		retcode = write(arg[0],buf,arg[2]);
+		break;
+	default:
+		retcode = -1;
+		break;
+	}
+
+	/* Tell NINDY to continue
+	 */
+	sprintf( buf, "e%x", retcode );
+	send( buf, 1 );
+}
+
+
+/******************************************************************************
+ * ninStopWhy:
+ *	Assume the application program has stopped (i.e., a DLE was received
+ *	from NINDY).  Ask NINDY for status information describing the
+ *	reason for the halt.
+ *
+ *	Returns a non-zero value if the user program has exited, 0 otherwise.
+ *	Also returns the following information, through passed pointers:
+ *           - why: an exit code if program the exited; otherwise the reason
+ *			why the program halted (see stop.h for values).
+ *	    - contents of register ip (little-endian byte order)
+ *	    - contents of register sp (little-endian byte order)
+ *	    - contents of register fp (little-endian byte order)
+ ******************************************************************************/
+char
+OninStopWhy( whyp, ipp, fpp, spp )
+    char *whyp;	/* Return the 'why' code through this pointer	*/
+    char *ipp;	/* Return contents of register ip through this pointer	*/
+    char *fpp;	/* Return contents of register fp through this pointer	*/
+    char *spp;	/* Return contents of register sp through this pointer	*/
+{
+	char buf[30];
+	char stop_exit;
+
+	strcpy( buf, "?" );
+	send( buf, 0 );
+	hexbin( 1, buf, &stop_exit );
+	hexbin( 1, buf+2, whyp );
+	hexbin( 4, buf+4, ipp );
+	hexbin( 4, buf+12, fpp );
+	hexbin( 4, buf+20, spp );
+	return stop_exit;
+}
+
+/******************************************************************************
+ * ninStrGet:
+ *	Read a '\0'-terminated string of data out of the 960 memory space.
+ *
+ ******************************************************************************/
+static
+OninStrGet( ninaddr, hostaddr )
+     unsigned long ninaddr;	/* Address of string in NINDY memory space */
+     char *hostaddr;		/* Address of the buffer to which string should
+				 *	be copied.
+				 */
+{
+  /* FIXME: seems to be an arbitrary limit on the length of the string.  */
+	char buf[BUFSIZE];	/* String as 2 ASCII hex digits per byte */
+	int numchars;		/* Length of string in bytes.		*/
+
+	sprintf( buf, "\"%x", ninaddr );
+	send( buf, 0 );
+	numchars = strlen(buf)/2;
+	hexbin( numchars, buf, hostaddr );
+	hostaddr[numchars] = '\0';
+}
+
+#if 0
+/* never used.  */
+
+/******************************************************************************
+ * ninVersion:
+ *	Ask NINDY for version information about itself.
+ *	The information is sent as an ascii string in the form "x.xx,<arch>",
+ *	where,
+ *		x.xx	is the version number
+ *		<arch>	is the processor architecture: "KA", "KB", "MC", "CA" *
+ *
+ ******************************************************************************/
+int
+OninVersion( p )
+     char *p;		/* Where to place version string */
+{
+  /* FIXME: this is an arbitrary limit on the length of version string.  */
+	char buf[BUFSIZE];
+
+	strcpy( buf, "v" );
+	send( buf, 0 );
+	strcpy( p, buf );
+	return strlen( buf );
+}
+#endif
diff --git a/gdb/nindy-share/README b/gdb/nindy-share/README
new file mode 100644
index 0000000..3f217ad
--- /dev/null
+++ b/gdb/nindy-share/README
@@ -0,0 +1,3 @@
+The files in this directory started out life as code shared between
+the nindy monitor and GDB.  For various reasons, this is no longer
+true.  Eventually, they probably should be merged into remote-nindy.c.
diff --git a/gdb/nindy-share/VERSION b/gdb/nindy-share/VERSION
new file mode 100644
index 0000000..5625e59
--- /dev/null
+++ b/gdb/nindy-share/VERSION
@@ -0,0 +1 @@
+1.2
diff --git a/gdb/nindy-share/b.out.h b/gdb/nindy-share/b.out.h
new file mode 100644
index 0000000..a82c261
--- /dev/null
+++ b/gdb/nindy-share/b.out.h
@@ -0,0 +1,158 @@
+/*  Copyright 1992 Free Software Foundation, Inc.
+ *
+ * This file is a modified version of 'a.out.h'.  It is to be used in all
+ * all GNU tools modified to support the i80960 (or tools that operate on
+ * object files created by such tools).
+ *
+ * All i80960 development is done in a CROSS-DEVELOPMENT environment.  I.e.,
+ * object code is generated on, and executed under the direction of a symbolic
+ * debugger running on, a host system.  We do not want to be subject to the
+ * vagaries of which host it is or whether it supports COFF or a.out format,
+ * or anything else.  We DO want to:
+ *
+ *	o always generate the same format object files, regardless of host.
+ *
+ *	o have an 'a.out' header that we can modify for our own purposes
+ *	  (the 80960 is typically an embedded processor and may require
+ *	  enhanced linker support that the normal a.out.h header can't
+ *	  accommodate).
+ *
+ * As for byte-ordering, the following rules apply:
+ *
+ *	o Text and data that is actually downloaded to the target is always
+ *	  in i80960 (little-endian) order.
+ *
+ *	o All other numbers (in the header, symbols, relocation directives)
+ *	  are in host byte-order:  object files CANNOT be lifted from a
+ *	  little-end host and used on a big-endian (or vice versa) without
+ *	  modification.
+ *
+ *	o The downloader ('comm960') takes care to generate a pseudo-header
+ *	  with correct (i80960) byte-ordering before shipping text and data
+ *	  off to the NINDY monitor in the target systems.  Symbols and
+ *	  relocation info are never sent to the target.
+ */
+
+
+#define BMAGIC	0415
+/* We don't accept the following (see N_BADMAG macro).
+ * They're just here so GNU code will compile.
+ */
+#define	OMAGIC	0407		/* old impure format */
+#define	NMAGIC	0410		/* read-only text */
+#define	ZMAGIC	0413		/* demand load format */
+
+/* FILE HEADER
+ *	All 'lengths' are given as a number of bytes.
+ *	All 'alignments' are for relinkable files only;  an alignment of
+ *		'n' indicates the corresponding segment must begin at an
+ *		address that is a multiple of (2**n).
+ */
+struct exec {
+	/* Standard stuff */
+	unsigned long a_magic;	/* Identifies this as a b.out file	*/
+	unsigned long a_text;	/* Length of text			*/
+	unsigned long a_data;	/* Length of data			*/
+	unsigned long a_bss;	/* Length of runtime uninitialized data area */
+	unsigned long a_syms;	/* Length of symbol table		*/
+	unsigned long a_entry;	/* Runtime start address		*/
+	unsigned long a_trsize;	/* Length of text relocation info	*/
+	unsigned long a_drsize;	/* Length of data relocation info	*/
+
+	/* Added for i960 */
+	unsigned long a_tload;	/* Text runtime load address		*/
+	unsigned long a_dload;	/* Data runtime load address		*/
+	unsigned char a_talign;	/* Alignment of text segment		*/
+	unsigned char a_dalign;	/* Alignment of data segment		*/
+	unsigned char a_balign;	/* Alignment of bss segment		*/
+	unsigned char unused;	/* (Just to make struct size a multiple of 4) */
+};
+
+#define N_BADMAG(x)	(((x).a_magic)!=BMAGIC)
+#define N_TXTOFF(x)	( sizeof(struct exec) )
+#define N_DATOFF(x)	( N_TXTOFF(x) + (x).a_text )
+#define N_TROFF(x)	( N_DATOFF(x) + (x).a_data )
+#define N_DROFF(x)	( N_TROFF(x) + (x).a_trsize )
+#define N_SYMOFF(x)	( N_DROFF(x) + (x).a_drsize )
+#define N_STROFF(x)	( N_SYMOFF(x) + (x).a_syms )
+
+/* A single entry in the symbol table
+ */
+struct nlist {
+	union {
+		char	*n_name;
+		struct nlist *n_next;
+		long	n_strx;		/* Index into string table	*/
+	} n_un;
+	unsigned char n_type;	/* See below				*/
+	char	n_other;	/* Used in i80960 support -- see below	*/
+	short	n_desc;
+	unsigned long n_value;
+};
+
+
+/* Legal values of n_type
+ */
+#define N_UNDF	0	/* Undefined symbol	*/
+#define N_ABS	2	/* Absolute symbol	*/
+#define N_TEXT	4	/* Text symbol		*/
+#define N_DATA	6	/* Data symbol		*/
+#define N_BSS	8	/* BSS symbol		*/
+#define N_FN	31	/* Filename symbol	*/
+
+#define N_EXT	1	/* External symbol (OR'd in with one of above)	*/
+#define N_TYPE	036	/* Mask for all the type bits			*/
+#define N_STAB	0340	/* Mask for all bits used for SDB entries 	*/
+
+/* MEANING OF 'n_other'
+ *
+ * If non-zero, the 'n_other' fields indicates either a leaf procedure or
+ * a system procedure, as follows:
+ *
+ *	1 <= n_other <= 32 :
+ *		The symbol is the entry point to a system procedure.
+ *		'n_value' is the address of the entry, as for any other
+ *		procedure.  The system procedure number (which can be used in
+ *		a 'calls' instruction) is (n_other-1).  These entries come from
+ *		'.sysproc' directives.
+ *
+ *	n_other == N_CALLNAME
+ *		the symbol is the 'call' entry point to a leaf procedure.
+ *		The *next* symbol in the symbol table must be the corresponding
+ *		'bal' entry point to the procedure (see following).  These
+ *		entries come from '.leafproc' directives in which two different
+ *		symbols are specified (the first one is represented here).
+ *	
+ *
+ *	n_other == N_BALNAME
+ *		the symbol is the 'bal' entry point to a leaf procedure.
+ *		These entries result from '.leafproc' directives in which only
+ *		one symbol is specified, or in which the same symbol is
+ *		specified twice.
+ *
+ * Note that an N_CALLNAME entry *must* have a corresponding N_BALNAME entry,
+ * but not every N_BALNAME entry must have an N_CALLNAME entry.
+ */
+#define	N_CALLNAME	-1
+#define	N_BALNAME	-2
+
+
+struct relocation_info {
+	int	 r_address;	/* File address of item to be relocated	*/
+	unsigned
+		r_symbolnum:24,/* Index of symbol on which relocation is based*/
+		r_pcrel:1,	/* 1 => relocate PC-relative; else absolute
+				 *	On i960, pc-relative implies 24-bit
+				 *	address, absolute implies 32-bit.
+				 */
+		r_length:2,	/* Number of bytes to relocate:
+				 *	0 => 1 byte
+				 *	1 => 2 bytes
+				 *	2 => 4 bytes -- only value used for i960
+				 */
+		r_extern:1,
+		r_bsr:1,	/* Something for the GNU NS32K assembler */
+		r_disp:1,	/* Something for the GNU NS32K assembler */
+		r_callj:1,	/* 1 if relocation target is an i960 'callj' */
+		nuthin:1;	/* Unused				*/
+};
diff --git a/gdb/nindy-share/block_io.h b/gdb/nindy-share/block_io.h
new file mode 100644
index 0000000..6521cdb
--- /dev/null
+++ b/gdb/nindy-share/block_io.h
@@ -0,0 +1,68 @@
+/******************************************************************
+	Copyright 1990, 1992 Free Software Foundation, Inc.
+
+	This code was donated by Intel Corp.
+
+   Intel hereby grants you permission to copy, modify, and 
+   distribute this software and its documentation.  Intel grants
+   this permission provided that the above copyright notice 
+   appears in all copies and that both the copyright notice and
+   this permission notice appear in supporting documentation.  In
+   addition, Intel grants this permission provided that you
+   prominently mark as not part of the original any modifications
+   made to this software or documentation, and that the name of 
+   Intel Corporation not be used in advertising or publicity 
+   pertaining to distribution of the software or the documentation 
+   without specific, written prior permission.  
+
+   Intel Corporation does not warrant, guarantee or make any 
+   representations regarding the use of, or the results of the use
+   of, the software and documentation in terms of correctness, 
+   accuracy, reliability, currentness, or otherwise; and you rely
+   on the software, documentation and results solely at your own 
+   risk.							  */
+/******************************************************************/
+
+/*****************************************************************************
+ * Structures and definitions supporting NINDY requests for services by a
+ * remote host.  Used by NINDY monitor, library libnin, comm960, gdb960,
+ * etc.  Also contains some defines for NINDY console I/O requests.
+ *****************************************************************************/
+
+/* the following four are hardware dependent */
+#define	BIT_16		short
+#define	BIT_32		int
+#define	UBIT_16		unsigned short
+#define	UBIT_32		unsigned int
+
+/* Service request numbers -- these are the services that can be asked of the
+ * host.
+ */
+#define BS_ACCESS	0x10
+#define BS_CLOSE	0x20
+#define BS_CREAT	0x30
+#define BS_SEEK		0x40
+#define BS_OPEN		0x50
+#define BS_READ		0x60
+#define BS_STAT		0x70
+#define BS_SYSTEMD	0x80
+#define BS_TIME		0x90
+#define BS_UNMASK	0xa0
+#define BS_UNLINK	0xb0
+#define BS_WRITE	0xc0
+
+
+/* Maximum number of arguments to any of the above service requests
+ * (in addition to the request number).
+ */
+#define MAX_SRQ_ARGS    3
+
+/* Number of bytes of data that can be read or written by a single I/O request
+ */
+#define BUFSIZE		1024
+
+/* NINDY console I/O requests:  CO sends a single character to stdout,
+ * CI reads one.
+ */
+#define CI 		0
+#define CO 		1
diff --git a/gdb/nindy-share/coff.h b/gdb/nindy-share/coff.h
new file mode 100644
index 0000000..b169b71
--- /dev/null
+++ b/gdb/nindy-share/coff.h
@@ -0,0 +1,336 @@
+/*  Copyright 1990, 1992 Free Software Foundation, Inc.
+ *
+ *   This code was donated by Intel Corp.
+ *
+ * This is a coff version of a.out.h to support 80960 debugging from
+ * a Unix (possibly BSD) host.  It's used by:
+ *	o gdb960 to symbols in code generated with Intel (non-GNU) tools.
+ *	o comm960 to convert a b.out file to a coff file for download.
+ */
+
+
+/********************** FILE HEADER **********************/
+
+struct filehdr {
+	unsigned short	f_magic;	/* magic number			*/
+	unsigned short	f_nscns;	/* number of sections		*/
+	long		f_timdat;	/* time & date stamp		*/
+	long		f_symptr;	/* file pointer to symtab	*/
+	long		f_nsyms;	/* number of symtab entries	*/
+	unsigned short	f_opthdr;	/* sizeof(optional hdr)		*/
+	unsigned short	f_flags;	/* flags			*/
+};
+
+
+/* Bits for f_flags:
+ *	F_RELFLG	relocation info stripped from file
+ *	F_EXEC		file is executable (no unresolved externel references)
+ *	F_LNNO		line nunbers stripped from file
+ *	F_LSYMS		local symbols stripped from file
+ *	F_AR32WR	file has byte ordering of an AR32WR machine (e.g. vax)
+ */
+#define F_RELFLG	0000001
+#define F_EXEC		0000002
+#define F_LNNO		0000004
+#define F_LSYMS	0000010
+#define F_AR32WR	0000400
+
+
+/*
+ *	Intel 80960 (I960) processor flags.
+ *	F_I960TYPE == mask for processor type field. 
+ */
+#define	F_I960TYPE		0170000
+#define	F_I960CA		0010000
+#define F_I960FLOAT		0020000
+#define F_I960BA		0030000
+#define F_I960XA		0040000
+
+/*
+ * i80960 Magic Numbers
+ */
+#define I960ROMAGIC	0540	/* read-only text segments	*/
+#define I960RWMAGIC	0541	/* read-write text segments	*/
+
+#define I960BADMAG(x) (((x).f_magic!=I960ROMAGIC) && ((x).f_magic!=I960RWMAGIC))
+
+#define	FILHDR	struct filehdr
+#define	FILHSZ	sizeof(FILHDR)
+
+
+/********************** AOUT "OPTIONAL HEADER" **********************/
+
+typedef struct {
+	unsigned long	phys_addr;
+	unsigned long	bitarray;
+} TAGBITS;
+
+typedef	struct aouthdr {
+	short		magic;	/* type of file				*/
+	short		vstamp;	/* version stamp			*/
+	unsigned long	tsize;	/* text size in bytes, padded to FW bdry*/
+	unsigned long	dsize;	/* initialized data "  "		*/
+	unsigned long	bsize;	/* uninitialized data "   "		*/
+#if U3B
+	unsigned long	dum1;
+	unsigned long	dum2;	/* pad to entry point	*/
+#endif
+	unsigned long	entry;	/* entry pt.				*/
+	unsigned long	text_start;	/* base of text used for this file */
+	unsigned long	data_start;	/* base of data used for this file */
+	unsigned long	tagentries;	/* number of tag entries to follow */
+} AOUTHDR;
+
+/* return a pointer to the tag bits array */
+
+#define TAGPTR(aout) ((TAGBITS *) (&(aout.tagentries)+1))
+
+/* compute size of a header */
+
+#define AOUTSZ(aout) (sizeof(AOUTHDR)+(aout.tagentries*sizeof(TAGBITS)))
+
+/********************** STORAGE CLASSES **********************/
+
+#define C_EFCN		-1	/* physical end of function	*/
+#define C_NULL		0
+#define C_AUTO		1	/* automatic variable		*/
+#define C_EXT		2	/* external symbol		*/
+#define C_STAT		3	/* static			*/
+#define C_REG		4	/* register variable		*/
+#define C_EXTDEF	5	/* external definition		*/
+#define C_LABEL		6	/* label			*/
+#define C_ULABEL	7	/* undefined label		*/
+#define C_MOS		8	/* member of structure		*/
+#define C_ARG		9	/* function argument		*/
+#define C_STRTAG	10	/* structure tag		*/
+#define C_MOU		11	/* member of union		*/
+#define C_UNTAG		12	/* union tag			*/
+#define C_TPDEF		13	/* type definition		*/
+#define C_USTATIC	14	/* undefined static		*/
+#define C_ENTAG		15	/* enumeration tag		*/
+#define C_MOE		16	/* member of enumeration	*/
+#define C_REGPARM	17	/* register parameter		*/
+#define C_FIELD		18	/* bit field			*/
+#define C_BLOCK		100	/* ".bb" or ".eb"		*/
+#define C_FCN		101	/* ".bf" or ".ef"		*/
+#define C_EOS		102	/* end of structure		*/
+#define C_FILE		103	/* file name			*/
+#define C_LINE		104	/* line # reformatted as symbol table entry */
+#define C_ALIAS	 	105	/* duplicate tag		*/
+#define C_HIDDEN	106	/* ext symbol in dmert public lib */
+
+	/* New storage classes for 80960 */
+ 
+#define C_SCALL		107	/* Procedure reachable via system call	*/
+#define C_LEAFPROC	108	/* Leaf procedure, "call" via BAL	*/
+
+
+/********************** SECTION HEADER **********************/
+
+struct scnhdr {
+	char		s_name[8];	/* section name			*/
+	long		s_paddr;	/* physical address, aliased s_nlib */
+	long		s_vaddr;	/* virtual address		*/
+	long		s_size;		/* section size			*/
+	long		s_scnptr;	/* file ptr to raw data for section */
+	long		s_relptr;	/* file ptr to relocation	*/
+	long		s_lnnoptr;	/* file ptr to line numbers	*/
+	unsigned short	s_nreloc;	/* number of relocation entries	*/
+	unsigned short	s_nlnno;	/* number of line number entries*/
+	long		s_flags;	/* flags			*/
+	unsigned long	s_align;	/* section alignment		*/
+};
+
+/*
+ * names of "special" sections
+ */
+#define _TEXT	".text"
+#define _DATA	".data"
+#define _BSS	".bss"
+
+/*
+ * s_flags "type"
+ */
+#define	STYP_TEXT	0x20		/* section contains text only	*/
+#define STYP_DATA	0x40		/* section contains data only	*/
+#define STYP_BSS	0x80		/* section contains bss only	*/
+
+#define	SCNHDR	struct scnhdr
+#define	SCNHSZ	sizeof(SCNHDR)
+
+
+/********************** LINE NUMBERS **********************/
+
+/* 1 line number entry for every "breakpointable" source line in a section.
+ * Line numbers are grouped on a per function basis; first entry in a function
+ * grouping will have l_lnno = 0 and in place of physical address will be the
+ * symbol table index of the function name.
+ */
+struct lineno{
+	union {
+		long l_symndx;	/* function name symbol index, iff l_lnno == 0*/
+		long l_paddr;	/* (physical) address of line number	*/
+	} l_addr;
+	unsigned short	l_lnno;	/* line number		*/
+	char padding[2];	/* force alignment	*/
+};
+
+#define	LINENO	struct lineno
+#define	LINESZ	sizeof(LINENO) 
+
+
+/********************** SYMBOLS **********************/
+
+#define SYMNMLEN	8	/* # characters in a symbol name	*/
+#define FILNMLEN	14	/* # characters in a file name		*/
+#define DIMNUM		4	/* # array dimensions in auxiliary entry */
+
+
+struct syment {
+	union {
+		char	_n_name[SYMNMLEN];	/* old COFF version	*/
+		struct {
+			long	_n_zeroes;	/* new == 0		*/
+			long	_n_offset;	/* offset into string table */
+		} _n_n;
+		char	*_n_nptr[2];	/* allows for overlaying	*/
+	} _n;
+	long		n_value;	/* value of symbol		*/
+	short		n_scnum;	/* section number		*/
+	char		pad1[2];	/* force alignment		*/
+	unsigned long	n_type;		/* type and derived type	*/
+	char		n_sclass;	/* storage class		*/
+	char		n_numaux;	/* number of aux. entries	*/
+	char		pad2[2];	/* force alignment		*/
+};
+
+#define n_name		_n._n_name
+#define n_zeroes	_n._n_n._n_zeroes
+#define n_offset	_n._n_n._n_offset
+
+/*
+ * Relocatable symbols have number of the section in which they are defined,
+ * or one of the following:
+ */
+#define N_UNDEF	0	/* undefined symbol				*/
+#define N_ABS	-1	/* value of symbol is absolute			*/
+#define N_DEBUG	-2	/* debugging symbol -- symbol value is meaningless */
+
+/*
+ * Type of a symbol, in low 4 bits of the word
+ */
+#define T_NULL		0
+#define T_VOID		1	/* function argument (only used by compiler) */
+#define T_CHAR		2	/* character		*/
+#define T_SHORT		3	/* short integer	*/
+#define T_INT		4	/* integer		*/
+#define T_LONG		5	/* long integer		*/
+#define T_FLOAT		6	/* floating point	*/
+#define T_DOUBLE	7	/* double word		*/
+#define T_STRUCT	8	/* structure 		*/
+#define T_UNION		9	/* union 		*/
+#define T_ENUM		10	/* enumeration 		*/
+#define T_MOE		11	/* member of enumeration*/
+#define T_UCHAR		12	/* unsigned character	*/
+#define T_USHORT	13	/* unsigned short	*/
+#define T_UINT		14	/* unsigned integer	*/
+#define T_ULONG		15	/* unsigned long	*/
+#define T_LNGDBL	16	/* long double		*/
+
+
+/*
+ * derived types
+ */
+#define DT_PTR		1	/* pointer	*/
+#define DT_FCN		2	/* function	*/
+#define DT_ARY		3	/* array	*/
+
+#define N_BTMASK	037
+#define N_TMASK		0140
+#define N_BTSHFT	5
+#define N_TSHIFT	2
+
+#define BTYPE(x)	((x) & N_BTMASK)
+
+
+#define ISPTR(x)	(((x) & N_TMASK) == (DT_PTR << N_BTSHFT))
+#define ISFCN(x)	(((x) & N_TMASK) == (DT_FCN << N_BTSHFT))
+#define ISARY(x)	(((x) & N_TMASK) == (DT_ARY << N_BTSHFT))
+
+#define DECREF(x) ((((x)>>N_TSHIFT)&~N_BTMASK)|((x)&N_BTMASK))
+
+union auxent {
+	struct {
+		long x_tagndx;	/* str, un, or enum tag indx */
+		union {
+			struct {
+			    unsigned short x_lnno; /* declaration line number */
+			    unsigned short x_size; /* str/union/array size */
+			} x_lnsz;
+			long x_fsize;	/* size of function */
+		} x_misc;
+		union {
+			struct {		/* if ISFCN, tag, or .bb */
+			    long x_lnnoptr;	/* ptr to fcn line # */
+			    long x_endndx;	/* entry ndx past block end */
+			} x_fcn;
+			struct {		/* if ISARY, up to 4 dimen. */
+			    unsigned short x_dimen[DIMNUM];
+			} x_ary;
+		} x_fcnary;
+		unsigned short x_tvndx;		/* tv index */
+	} x_sym;
+
+	union {
+		char x_fname[FILNMLEN];
+		struct {
+			long x_zeroes;
+			long x_offset;
+		} x_n;
+	} x_file;
+
+	struct {
+		long x_scnlen;			/* section length */
+		unsigned short x_nreloc;	/* # relocation entries */
+		unsigned short x_nlinno;	/* # line numbers */
+	} x_scn;
+
+	struct {
+		long x_stdindx;
+	} x_sc;
+
+	struct {
+		unsigned long x_balntry;
+	} x_bal;
+
+	char a[sizeof(struct syment)];	/* force auxent/syment sizes to match */
+};
+
+#define	SYMENT	struct syment
+#define	SYMESZ	sizeof(SYMENT)	
+#define	AUXENT	union auxent
+#define	AUXESZ	sizeof(AUXENT)
+
+#if VAX || I960
+#	define _ETEXT	"_etext"
+#else
+#	define _ETEXT	"etext"
+#endif
+
+/********************** RELOCATION DIRECTIVES **********************/
+
+struct reloc {
+	long r_vaddr;		/* Virtual address of reference */
+	long r_symndx;		/* Index into symbol table	*/
+	unsigned short r_type;	/* Relocation type		*/
+	char pad[2];		/* Unused			*/
+};
+
+/* Only values of r_type GNU/960 cares about */
+#define R_RELLONG	17	/* Direct 32-bit relocation		*/
+#define R_IPRMED	25	/* 24-bit ip-relative relocation	*/
+#define R_OPTCALL	27	/* 32-bit optimizable call (leafproc/sysproc) */
+
+
+#define RELOC struct reloc
+#define RELSZ sizeof(RELOC)
diff --git a/gdb/nindy-share/env.h b/gdb/nindy-share/env.h
new file mode 100644
index 0000000..df1ceef
--- /dev/null
+++ b/gdb/nindy-share/env.h
@@ -0,0 +1,12 @@
+/* Copyright 1990, 1992 Free Software Foundation, Inc.
+ *
+ * This code was donated by Intel Corp.
+ * 
+ * GNU/960 tool runtime environment
+ */
+
+
+/* Base directory at which GNU/960 tools are assumed to be installed, if
+ * the environment variable G960BASE is not defined.
+ */
+#define DEFAULT_BASE	"/usr/local/g960"
diff --git a/gdb/nindy-share/nindy.c b/gdb/nindy-share/nindy.c
new file mode 100644
index 0000000..e275e49
--- /dev/null
+++ b/gdb/nindy-share/nindy.c
@@ -0,0 +1,1154 @@
+/* This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This started out life as code shared between the nindy monitor and
+   GDB.  For various reasons, this is no longer true.  Eventually, it
+   probably should be merged into remote-nindy.c.  */
+
+/******************************************************************************
+ *
+ *	 		NINDY INTERFACE ROUTINES
+ *
+ * The caller of these routines should be aware that:
+ *
+ * (1) ninConnect() should be called to open communications with the
+ *     remote NINDY board before any of the other routines are invoked.
+ *
+ * (2) almost all interactions are driven by the host: nindy sends information
+ *     in response to host commands.
+ *
+ * (3) the lone exception to (2) is the single character DLE (^P, 0x10).
+ *     Receipt of a DLE from NINDY indicates that the application program
+ *     running under NINDY has stopped execution and that NINDY is now
+ *     available to talk to the host (all other communication received after
+ *     the application has been started should be presumed to come from the
+ *     application and should be passed on by the host to stdout).
+ *
+ * (4) the reason the application program stopped can be determined with the
+ *     ninStopWhy() function.  There are three classes of stop reasons:
+ *
+ *	(a) the application has terminated execution.
+ *	    The host should take appropriate action.
+ *
+ *	(b) the application had a fault or trace event.
+ *	    The host should take appropriate action.
+ *
+ *	(c) the application wishes to make a service request (srq) of the host;
+ *	    e.g., to open/close a file, read/write a file, etc.  The ninSrq()
+ *	    function should be called to determine the nature of the request
+ *	    and process it.
+ */
+
+#include <stdio.h>
+#include "defs.h"
+#include "serial.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#if !defined (HAVE_TERMIOS) && !defined (HAVE_TERMIO) && !defined (HAVE_SGTTY)
+#define HAVE_SGTTY
+#endif
+
+#ifdef HAVE_SGTTY
+#include <sys/ioctl.h>
+#endif
+
+#include <sys/types.h>	/* Needed by file.h on Sys V */
+#include <sys/file.h>
+#include <signal.h>
+#include <sys/stat.h>
+
+#if 0
+#include "ttycntl.h"
+#endif
+#include "block_io.h"
+#include "wait.h"
+#include "env.h"
+
+#define DLE	0x10	/* ^P */
+#define XON	0x11	/* ^Q */
+#define XOFF	0x13	/* ^S */
+#define ESC	0x1b
+
+#define TIMEOUT		-1
+
+int quiet = 0;	/* 1 => stifle unnecessary messages */
+serial_t nindy_serial;
+
+static int old_nindy = 0; /* 1 => use old (hex) communication protocol */
+static ninStrGet();
+
+		/****************************
+		 *                          *
+		 *  MISCELLANEOUS UTILTIES  *
+		 *                          *
+		 ****************************/
+
+/******************************************************************************
+ * say:
+ *	This is a printf that takes at most two arguments (in addition to the
+ *	format string) and that outputs nothing if verbose output has been
+ *	suppressed.
+ *****************************************************************************/
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+say (char *fmt, ...)
+#else
+say (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start(args, fmt);
+#else
+  char *fmt;
+
+  va_start (args);
+  fmt = va_arg (args, char *);
+#endif
+
+  if (!quiet)
+    {
+      vfprintf_unfiltered (gdb_stdout, fmt, args);
+      gdb_flush (gdb_stdout);
+    }
+  va_end (args);
+}
+
+/******************************************************************************
+ * exists:
+ *	Creates a full pathname by concatenating up to three name components
+ *	onto a specified base name; optionally looks up the base name as a
+ *	runtime environment variable;  and checks to see if the file or
+ *	directory specified by the pathname actually exists.
+ *
+ *	Returns:  the full pathname if it exists, NULL otherwise.
+ *		(returned pathname is in malloc'd memory and must be freed
+ *		by caller).
+ *****************************************************************************/
+static char *
+exists( base, c1, c2, c3, env )
+    char *base;		/* Base directory of path */
+    char *c1, *c2, *c3;	/* Components (subdirectories and/or file name) to be
+			 *	appended onto the base directory name.  One or
+			 *	more may be omitted by passing NULL pointers.
+			 */
+    int env;		/* If 1, '*base' is the name of an environment variable
+			 *	to be examined for the base directory name;
+			 *	otherwise, '*base' is the actual name of the
+			 *	base directory.
+			 */
+{
+	struct stat buf;/* For call to 'stat' -- never examined */
+	char *path;	/* Pointer to full pathname (malloc'd memory) */
+	int len;	/* Length of full pathname (incl. terminator) */
+	extern char *getenv();
+
+
+	if ( env ){
+		base = getenv( base );
+		if ( base == NULL ){
+			return NULL;
+		}
+	}
+
+	len = strlen(base) + 4;
+			/* +4 for terminator and "/" before each component */
+	if ( c1 != NULL ){
+		len += strlen(c1);
+	}
+	if ( c2 != NULL ){
+		len += strlen(c2);
+	}
+	if ( c3 != NULL ){
+		len += strlen(c3);
+	}
+
+	path = xmalloc (len);
+
+	strcpy( path, base );
+	if ( c1 != NULL ){
+		strcat( path, "/" );
+		strcat( path, c1 );
+		if ( c2 != NULL ){
+			strcat( path, "/" );
+			strcat( path, c2 );
+			if ( c3 != NULL ){
+				strcat( path, "/" );
+				strcat( path, c3 );
+			}
+		}
+	}
+
+	if ( stat(path,&buf) != 0 ){
+		free( path );
+		path = NULL;
+	}
+	return path;
+}
+
+		/*****************************
+		 *                           *
+		 *  LOW-LEVEL COMMUNICATION  *
+		 *                           *
+		 *****************************/
+
+/* Read *exactly* N characters from the NINDY tty, and put them in
+   *BUF.  Translate escape sequences into single characters, counting
+   each such sequence as 1 character.
+
+   An escape sequence consists of ESC and a following character.  The
+   ESC is discarded and the other character gets bit 0x40 cleared --
+   thus ESC P == ^P, ESC S == ^S, ESC [ == ESC, etc.
+
+   Return 1 if successful, 0 if more than TIMEOUT seconds pass without
+   any input.  */
+
+static int
+rdnin (buf,n,timeout)
+    unsigned char * buf;	/* Where to place characters read	*/
+    int n;			/* Number of characters to read		*/
+    int timeout;		/* Timeout, in seconds			*/
+{
+  int escape_seen;	/* 1 => last character of a read was an ESC */
+  int c;
+
+  escape_seen = 0;
+  while (n)
+    {
+      c = SERIAL_READCHAR (nindy_serial, timeout);
+      switch (c)
+	{
+	case SERIAL_ERROR:
+	case SERIAL_TIMEOUT:
+	case SERIAL_EOF:
+	  return 0;
+
+	case ESC:
+	  escape_seen = 1;
+	  break;
+
+	default:
+	  if (escape_seen)
+	    {
+	      escape_seen = 0;
+	      c &= ~0x40;
+	    }
+	  *buf++ = c;
+	  --n;
+	  break;
+	}
+    }
+  return 1;
+}
+
+
+/******************************************************************************
+ * getpkt:
+ *	Read a packet from a remote NINDY, with error checking, into the
+ *	indicated buffer.
+ *
+ *	Return packet status byte on success, TIMEOUT on failure.
+ ******************************************************************************/
+static
+int
+getpkt(buf)
+     unsigned char *buf;
+{
+	int i;
+	unsigned char hdr[3];	/* Packet header:
+				 *	hdr[0] = low byte of message length
+				 *	hdr[1] = high byte of message length
+				 *	hdr[2] = message status
+				 */
+	int cnt;		/* Message length (status byte + data)	*/
+	unsigned char cs_calc;	/* Checksum calculated			*/
+	unsigned char cs_recv;	/* Checksum received			*/
+	static char errfmt[] =
+			"Bad checksum (recv=0x%02x; calc=0x%02x); retrying\r\n";
+
+	while (1){
+		if ( !rdnin(hdr,3,5) ){
+			return TIMEOUT;
+		}
+		cnt = (hdr[1]<<8) + hdr[0] - 1;
+					/* -1 for status byte (already read) */
+
+		/* Caller's buffer may only be big enough for message body,
+		 * without status byte and checksum, so make sure to read
+		 * checksum into a separate buffer.
+		 */
+		if ( !rdnin(buf,cnt,5) || !rdnin(&cs_recv,1,5) ){
+			return TIMEOUT;
+		}
+
+		/* Calculate checksum
+		 */
+		cs_calc = hdr[0] + hdr[1] + hdr[2];
+		for ( i = 0; i < cnt; i++ ){
+			cs_calc += buf[i];
+		}
+		if ( cs_calc == cs_recv ){
+			SERIAL_WRITE (nindy_serial, "+", 1);
+			return hdr[2];
+		}
+	
+		/* Bad checksum: report, send NAK, and re-receive
+		 */
+		fprintf(stderr, errfmt, cs_recv, cs_calc );
+		SERIAL_WRITE (nindy_serial, "-", 1);
+	}
+}
+
+
+/******************************************************************************
+ * putpkt:
+ *	Send a packet to NINDY, checksumming it and converting special
+ *	characters to escape sequences.
+ ******************************************************************************/
+
+/* This macro puts the character 'c' into the buffer pointed at by 'p',
+ * and increments the pointer.  If 'c' is one of the 4 special characters
+ * in the transmission protocol, it is converted into a 2-character
+ * escape sequence.
+ */
+#define PUTBUF(c,p)						\
+	if ( c == DLE || c == ESC || c == XON || c == XOFF ){	\
+		*p++ = ESC;					\
+		*p++ = c | 0x40;				\
+	} else {						\
+		*p++ = c;					\
+	}
+
+static
+putpkt( msg, len )
+    unsigned char *msg;	/* Command to be sent, without lead ^P (\020) or checksum */
+    int len;	/* Number of bytes in message			*/
+{
+	static char *buf = NULL;/* Local buffer -- build packet here	*/
+	static int maxbuf = 0;	/* Current length of buffer		*/
+	unsigned char ack;	/* Response received from NINDY		*/
+	unsigned char checksum;	/* Packet checksum			*/
+	char *p;		/* Pointer into buffer			*/
+	int lenhi, lenlo; 	/* High and low bytes of message length	*/
+	int i;
+
+
+	/* Make sure local buffer is big enough.  Must include space for
+	 * packet length, message body, and checksum.  And in the worst
+	 * case, each character would expand into a 2-character escape
+	 * sequence.
+	 */
+	if ( maxbuf < ((2*len)+10) ){
+		if ( buf ){
+			free( buf );
+		}
+		buf = xmalloc( maxbuf=((2*len)+10) );
+	}
+
+	/* Attention, NINDY!
+	 */
+	SERIAL_WRITE (nindy_serial, "\020", 1);
+
+
+	lenlo = len & 0xff;
+	lenhi = (len>>8) & 0xff;
+	checksum = lenlo + lenhi;
+	p = buf;
+
+	PUTBUF( lenlo, p );
+	PUTBUF( lenhi, p );
+
+	for ( i=0; i<len; i++ ){
+		PUTBUF( msg[i], p );
+		checksum += msg[i];
+	}
+
+	PUTBUF( checksum, p );
+
+	/* Send checksummed message over and over until we get a positive ack
+	 */
+	SERIAL_WRITE (nindy_serial, buf, p - buf);
+	while (1){
+		if ( !rdnin(&ack,1,5) ){
+			/* timed out */
+			fprintf(stderr,"ACK timed out; resending\r\n");
+			/* Attention, NINDY! */
+			SERIAL_WRITE (nindy_serial, "\020", 1);
+			SERIAL_WRITE (nindy_serial, buf, p - buf);
+		} else if ( ack == '+' ){
+			return;
+		} else if ( ack == '-' ){
+			fprintf( stderr, "Remote NAK; resending\r\n" );
+			SERIAL_WRITE (nindy_serial, buf, p - buf);
+		} else {
+			fprintf( stderr, "Bad ACK, ignored: <%c>\r\n", ack );
+		}
+	}
+}
+
+
+
+/******************************************************************************
+ * send:
+ *	Send a message to a remote NINDY.  Check message status byte
+ *	for error responses.  If no error, return NINDY reponse (if any).
+ ******************************************************************************/
+static
+send( out, len, in )
+    unsigned char *out;	/* Message to be sent to NINDY			*/
+    int len;		/* Number of meaningful bytes in out buffer	*/
+    unsigned char *in;	/* Where to put response received from NINDY	*/
+{
+	char *fmt;
+	int status;
+	static char *errmsg[] = {
+		"",						/* 0 */
+		"Buffer overflow",				/* 1 */
+		"Unknown command",				/* 2 */
+		"Wrong amount of data to load register(s)",	/* 3 */
+		"Missing command argument(s)",			/* 4 */
+		"Odd number of digits sent to load memory",	/* 5 */
+		"Unknown register name",			/* 6 */
+		"No such memory segment",			/* 7 */
+		"No breakpoint available",			/* 8 */
+		"Can't set requested baud rate",		/* 9 */
+	};
+#	define NUMERRS	( sizeof(errmsg) / sizeof(errmsg[0]) )
+
+	static char err1[] = "Unknown error response from NINDY: #%d\r\n";
+	static char err2[] = "Error response #%d from NINDY: %s\r\n";
+
+	while (1){
+		putpkt(out,len);
+		status = getpkt(in);
+		if ( status == TIMEOUT ){
+			fprintf( stderr, "Response timed out; resending\r\n" );
+		} else {
+			break;
+		}
+	}
+
+	if ( status ){
+		fmt =  status > NUMERRS ? err1 : err2;
+		fprintf( stderr, fmt, status, errmsg[status] );
+		abort();
+	}
+}
+
+		/************************
+		 *                      *
+		 *  BAUD RATE ROUTINES  *
+		 *                      *
+		 ************************/
+
+/* Table of baudrates known to be acceptable to NINDY.  Each baud rate
+ * appears both as character string and as a Unix baud rate constant.
+ */
+struct baudrate {
+	char *string;
+	int rate;
+};
+
+static struct baudrate baudtab[] = {
+	 "1200", 1200,
+	 "2400", 2400,
+	 "4800", 4800,
+	 "9600", 9600,
+	"19200", 19200,
+	"38400", 38400,
+	NULL,    0		/* End of table */
+};
+
+/******************************************************************************
+ * parse_baudrate:
+ *	Look up the passed baud rate in the baudrate table.  If found, change
+ *	our internal record of the current baud rate, but don't do anything
+ *	about the tty just now.
+ *
+ *	Return pointer to baudrate structure on success, NULL on failure.
+ ******************************************************************************/
+static
+struct baudrate *
+parse_baudrate(s)
+    char *s;	/* Desired baud rate, as an ASCII (decimal) string */
+{
+	int i;
+
+	for ( i=0; baudtab[i].string != NULL; i++ ){
+		if ( !strcmp(baudtab[i].string,s) ){
+			return &baudtab[i];
+		}
+	}
+	return NULL;
+}
+
+/******************************************************************************
+ * try_baudrate:
+ *	Try speaking to NINDY via the specified file descriptor at the
+ *	specified baudrate.  Assume success if we can send an empty command
+ *	with a bogus checksum and receive a NAK (response of '-') back within
+ *	one second.
+ *
+ *	Return 1 on success, 0 on failure.
+ ***************************************************************************/
+
+static int
+try_baudrate (serial, brp)
+     serial_t serial;
+     struct baudrate *brp;
+{
+  unsigned char c;
+
+  /* Set specified baud rate and flush all pending input */
+  SERIAL_SETBAUDRATE (serial, brp->rate);
+  tty_flush (serial);
+
+  /* Send empty command with bad checksum, hope for NAK ('-') response */
+  SERIAL_WRITE (serial, "\020\0\0\001", 4);
+
+  /* Anything but a quick '-', including error, eof, or timeout, means that
+     this baudrate doesn't work.  */
+  return SERIAL_READCHAR (serial, 1) == '-';
+}
+
+/******************************************************************************
+ * autobaud:
+ *	Get NINDY talking over the specified file descriptor at the specified
+ *	baud rate.  First see if NINDY's already talking at 'baudrate'.  If
+ *	not, run through all the legal baudrates in 'baudtab' until one works,
+ *	and then tell NINDY to talk at 'baudrate' instead.
+ ******************************************************************************/
+static
+autobaud( serial, brp )
+     serial_t serial;
+     struct baudrate *brp;
+{
+  int i;
+  int failures;
+
+  say("NINDY at wrong baud rate? Trying to autobaud...\n");
+  failures = i = 0;
+  while (1)
+    {
+      say( "\r%s...   ", baudtab[i].string );
+      if (try_baudrate(serial, &baudtab[i]))
+	{
+	  break;
+	}
+      if (baudtab[++i].string == NULL)
+	{
+	  /* End of table -- wraparound */
+	  i = 0;
+	  if ( failures++ )
+	    {
+	      say("\nAutobaud failed again.  Giving up.\n");
+	      exit(1);
+	    }
+	  else
+	    {
+	      say("\nAutobaud failed. Trying again...\n");
+	    }
+	}
+    }
+
+  /* Found NINDY's current baud rate; now change it.  */
+  say("Changing NINDY baudrate to %s\n", brp->string);
+  ninBaud (brp->string);
+
+  /* Change our baud rate back to rate to which we just set NINDY.  */
+  SERIAL_SETBAUDRATE (serial, brp->rate);
+}
+
+		/**********************************
+		 *				  *
+		 *   NINDY INTERFACE ROUTINES	  *
+		 *                            	  *
+		 * ninConnect *MUST* be the first *
+		 * one of these routines called.  *
+		 **********************************/
+
+
+/******************************************************************************
+ * ninBaud:
+ *	Ask NINDY to change the baud rate on its serial port.
+ *	Assumes we know the baud rate at which NINDY's currently talking.
+ ******************************************************************************/
+ninBaud( baudrate )
+    char *baudrate;	/* Desired baud rate, as a string of ASCII decimal
+			 * digits.
+			 */
+{
+  unsigned char msg[100];
+
+  tty_flush (nindy_serial);
+
+  if (old_nindy)
+    {
+      char *p;		/* Pointer into buffer	*/
+      unsigned char csum;	/* Calculated checksum	*/
+
+      /* Can't use putpkt() because after the baudrate change NINDY's
+	 ack/nak will look like gibberish.  */
+
+      for (p=baudrate, csum=020+'z'; *p; p++)
+	{
+	  csum += *p;
+	}
+      sprintf (msg, "\020z%s#%02x", baudrate, csum);
+      SERIAL_WRITE (nindy_serial, msg, strlen (msg));
+    }
+  else
+    {
+      /* Can't use "send" because NINDY reply will be unreadable after
+	 baud rate change.  */
+      sprintf( msg, "z%s", baudrate );
+      putpkt( msg, strlen(msg)+1 );	/* "+1" to send terminator too */
+    }
+}
+
+/******************************************************************************
+ * ninBptDel:
+ *	Ask NINDY to delete the specified type of *hardware* breakpoint at
+ *	the specified address.  If the 'addr' is -1, all breakpoints of
+ *	the specified type are deleted.
+ ***************************************************************************/
+ninBptDel( addr, type )
+    long addr;	/* Address in 960 memory	*/
+    char type;	/* 'd' => data bkpt, 'i' => instruction breakpoint */
+{
+	unsigned char buf[10];
+
+	if ( old_nindy ){
+		OninBptDel( addr, type == 'd' ? 1 : 0 );
+		return;
+	}
+
+	buf[0] = 'b';
+	buf[1] = type;
+
+	if ( addr == -1 ){
+		send( buf, 2, NULL );
+	} else {
+		store_unsigned_integer (&buf[2], 4, addr);
+		send( buf, 6, NULL );
+	}
+}
+
+
+/******************************************************************************
+ * ninBptSet:
+ *	Ask NINDY to set the specified type of *hardware* breakpoint at
+ *	the specified address.
+ ******************************************************************************/
+ninBptSet( addr, type )
+    long addr;	/* Address in 960 memory	*/
+    char type;	/* 'd' => data bkpt, 'i' => instruction breakpoint */
+{
+	unsigned char buf[10];
+
+	if ( old_nindy ){
+		OninBptSet( addr, type == 'd' ? 1 : 0 );
+		return;
+	}
+
+
+	buf[0] = 'B';
+	buf[1] = type;
+	store_unsigned_integer (&buf[2], 4, addr);
+	send( buf, 6, NULL );
+}
+
+
+/******************************************************************************
+ * ninConnect:
+ *	Open the specified tty.  Get communications working at the specified
+ *	baud rate.  Flush any pending I/O on the tty.
+ *
+ *	Return the file descriptor, or -1 on failure.
+ ******************************************************************************/
+int
+ninConnect( name, baudrate, brk, silent, old_protocol )
+    char *name;		/* "/dev/ttyXX" to be opened			*/
+    char *baudrate;/* baud rate: a string of ascii decimal digits (eg,"9600")*/
+    int brk;		/* 1 => send break to tty first thing after opening it*/
+    int silent;		/* 1 => stifle unnecessary messages when talking to 
+			 *	this tty.
+			 */
+    int old_protocol;
+{
+	int i;
+	char *p;
+	struct baudrate *brp;
+
+	/* We will try each of the following paths when trying to open the tty
+	 */
+	static char *prefix[] = { "", "/dev/", "/dev/tty", NULL };
+
+	if ( old_protocol ){
+		old_nindy = 1;
+	}
+
+	quiet = silent;		/* Make global to this file */
+
+	for ( i=0; prefix[i] != NULL; i++ ){
+		p = xmalloc(strlen(prefix[i]) + strlen(name) + 1 );
+		strcpy( p, prefix[i] );
+		strcat( p, name );
+		nindy_serial = SERIAL_OPEN (p);
+		if (nindy_serial != NULL) {
+#ifdef TIOCEXCL
+			/* Exclusive use mode (hp9000 does not support it) */
+			ioctl(nindy_serial->fd,TIOCEXCL,NULL);
+#endif
+			SERIAL_RAW (nindy_serial);
+
+			if (brk)
+			  {
+			    SERIAL_SEND_BREAK (nindy_serial);
+			  }
+
+			brp = parse_baudrate( baudrate );
+			if ( brp == NULL ){
+				say("Illegal baudrate %s ignored; using 9600\n",
+								baudrate);
+				brp = parse_baudrate( "9600" );
+			}
+
+			if ( !try_baudrate(nindy_serial, brp) ){
+				autobaud(nindy_serial, brp);
+			}
+			tty_flush (nindy_serial);
+			say( "Connected to %s\n", p );
+			free(p);
+			break;
+		}
+		free(p);
+	}
+	return 0;
+}
+
+#if 0
+
+/* Currently unused; shouldn't we be doing this on target_kill and
+perhaps target_mourn?  FIXME.  */
+
+/******************************************************************************
+ * ninGdbExit:
+ *	Ask NINDY to leave GDB mode and print a NINDY prompt.
+ ****************************************************************************/
+ninGdbExit()
+{
+	if ( old_nindy ){
+		OninGdbExit();
+		return;
+	}
+        putpkt((unsigned char *) "E", 1 );
+}
+#endif
+
+/******************************************************************************
+ * ninGo:
+ *	Ask NINDY to start or continue execution of an application program
+ *	in it's memory at the current ip.
+ ******************************************************************************/
+ninGo( step_flag )
+    int step_flag;	/* 1 => run in single-step mode */
+{
+	if ( old_nindy ){
+		OninGo( step_flag );
+		return;
+	}
+	putpkt((unsigned char *) (step_flag ? "s" : "c"), 1 );
+}
+
+
+/******************************************************************************
+ * ninMemGet:
+ *	Read a string of bytes from NINDY's address space (960 memory).
+ ******************************************************************************/
+int
+ninMemGet(ninaddr, hostaddr, len)
+     long ninaddr;	/* Source address, in the 960 memory space	*/
+     unsigned char *hostaddr;	/* Destination address, in our memory space */
+     int len;		/* Number of bytes to read			*/
+{
+	unsigned char buf[BUFSIZE+20];
+	int cnt;		/* Number of bytes in next transfer	*/
+	int origlen = len;
+
+	if ( old_nindy ){
+		OninMemGet(ninaddr, hostaddr, len);
+		return;
+	}
+
+	for ( ; len > 0; len -= BUFSIZE ){
+		cnt = len > BUFSIZE ? BUFSIZE : len;
+
+		buf[0] = 'm';
+		store_unsigned_integer (&buf[1], 4, ninaddr);
+		buf[5] = cnt & 0xff;
+		buf[6] = (cnt>>8) & 0xff;
+
+		send( buf, 7, hostaddr );
+
+		ninaddr += cnt;
+		hostaddr += cnt;
+	}
+	return origlen;
+}
+
+
+/******************************************************************************
+ * ninMemPut:
+ *	Write a string of bytes into NINDY's address space (960 memory).
+ ******************************************************************************/
+int
+ninMemPut( ninaddr, hostaddr, len )
+     long ninaddr;	/* Destination address, in NINDY memory space	*/
+     unsigned char *hostaddr;	/* Source address, in our memory space	*/
+     int len;		/* Number of bytes to write			*/
+{
+	unsigned char buf[BUFSIZE+20];
+	int cnt;		/* Number of bytes in next transfer	*/
+	int origlen = len;
+
+	if ( old_nindy ){
+		OninMemPut( ninaddr, hostaddr, len );
+		return;
+	}
+	for ( ; len > 0; len -= BUFSIZE ){
+		cnt = len > BUFSIZE ? BUFSIZE : len;
+
+		buf[0] = 'M';
+		store_unsigned_integer (&buf[1], 4, ninaddr);
+		memcpy(buf + 5, hostaddr, cnt);
+		send( buf, cnt+5, NULL );
+
+		ninaddr += cnt;
+		hostaddr += cnt;
+	}
+	return origlen;
+}
+
+/******************************************************************************
+ * ninRegGet:
+ *	Retrieve the contents of a 960 register, and return them as a long
+ *	in host byte order.
+ *
+ *	THIS ROUTINE CAN ONLY BE USED TO READ THE LOCAL, GLOBAL, AND
+ *	ip/ac/pc/tc REGISTERS.
+ *
+ ******************************************************************************/
+long
+ninRegGet( regname )
+    char *regname;	/* Register name recognized by NINDY, subject to the
+			 * above limitations.
+			 */
+{
+	unsigned char outbuf[10];
+	unsigned char inbuf[20];
+
+	if ( old_nindy ){
+		return OninRegGet( regname );
+	}
+
+	sprintf( outbuf, "u%s:", regname );
+	send( outbuf, strlen(outbuf), inbuf );
+	return extract_unsigned_integer (inbuf, 4);
+}
+
+/******************************************************************************
+ * ninRegPut:
+ *	Set the contents of a 960 register.
+ *
+ *	THIS ROUTINE CAN ONLY BE USED TO SET THE LOCAL, GLOBAL, AND
+ *	ip/ac/pc/tc REGISTERS.
+ *
+ ******************************************************************************/
+ninRegPut( regname, val )
+    char *regname;	/* Register name recognized by NINDY, subject to the
+			 * above limitations.
+			 */
+    long val;		/* New contents of register, in host byte-order	*/
+{
+	unsigned char buf[20];
+	int len;
+
+	if ( old_nindy ){
+		OninRegPut( regname, val );
+		return;
+	}
+
+	sprintf( buf, "U%s:", regname );
+	len = strlen(buf);
+	store_unsigned_integer (&buf[len], 4, val);
+	send( buf, len+4, NULL );
+}
+
+/******************************************************************************
+ * ninRegsGet:
+ *	Get a dump of the contents of the entire 960 register set.  The
+ *	individual registers appear in the dump in the following order:
+ *
+ *		pfp  sp   rip  r3   r4   r5   r6   r7 
+ *		r8   r9   r10  r11  r12  r13  r14  r15 
+ *		g0   g1   g2   g3   g4   g5   g6   g7 
+ *		g8   g9   g10  g11  g12  g13  g14  fp 
+ *		pc   ac   ip   tc   fp0  fp1  fp2  fp3
+ *
+ *	Each individual register comprises exactly 4 bytes, except for
+ *	fp0-fp3, which are 8 bytes.  All register values are in 960
+ *	(little-endian) byte order.
+ *
+ ******************************************************************************/
+ninRegsGet( regp )
+    unsigned char *regp;		/* Where to place the register dump */
+{
+	if ( old_nindy ){
+		OninRegsGet( regp );
+		return;
+	}
+	send( (unsigned char *) "r", 1, regp );
+}
+
+
+/******************************************************************************
+ * ninRegsPut:
+ *	Initialize the entire 960 register set to a specified set of values.
+ *	The format of the register value data should be the same as that
+ *	returned by ninRegsGet.
+ *
+ * WARNING:
+ *	All register values must be in 960 (little-endian) byte order.
+ *
+ ******************************************************************************/
+ninRegsPut( regp )
+    char *regp;		/* Pointer to desired values of registers */
+{
+/* Number of bytes that we send to nindy.  I believe this is defined by
+   the protocol (it does not agree with REGISTER_BYTES).  */
+#define NINDY_REGISTER_BYTES	((36*4) + (4*8))
+	unsigned char buf[NINDY_REGISTER_BYTES+10];
+
+	if ( old_nindy ){
+		OninRegsPut( regp );
+		return;
+	}
+
+	buf[0] = 'R';
+	memcpy(buf+1,  regp, NINDY_REGISTER_BYTES );
+	send( buf, NINDY_REGISTER_BYTES+1, NULL );
+}
+
+
+/******************************************************************************
+ * ninReset:
+ *      Ask NINDY to perform a soft reset; wait for the reset to complete.
+ *
+ ******************************************************************************/
+ninReset()
+{
+	unsigned char ack;
+
+	if ( old_nindy ){
+		OninReset();
+		return;
+	}
+
+	while (1){
+		putpkt((unsigned char *) "X", 1 );
+		while (1){
+			if ( !rdnin(&ack,1,5) ){
+				/* Timed out */
+				break;		/* Resend */
+			}
+			if ( ack == '+' ){
+				return;
+			}
+		}
+	}
+}
+
+
+/******************************************************************************
+ * ninSrq:
+ *	Assume NINDY has stopped execution of the 960 application program in
+ *	order to process a host service request (srq).  Ask NINDY for the
+ *	srq arguments, perform the requested service, and send an "srq
+ *	complete" message so NINDY will return control to the application.
+ *
+ ******************************************************************************/
+ninSrq()
+{
+  /* FIXME: Imposes arbitrary limits on lengths of pathnames and such.  */
+	unsigned char buf[BUFSIZE];
+	int retcode;
+	unsigned char srqnum;
+	int i;
+	int offset;
+	int arg[MAX_SRQ_ARGS];
+
+	if ( old_nindy ){
+		OninSrq();
+		return;
+	}
+
+
+	/* Get srq number and arguments
+	 */
+	send((unsigned char *) "!", 1, buf );
+
+	srqnum = buf[0];
+	for  ( i=0, offset=1; i < MAX_SRQ_ARGS; i++, offset+=4 ){
+		arg[i] = extract_unsigned_integer (&buf[offset], 4);
+	}
+
+	/* Process Srq
+	 */
+	switch( srqnum ){
+	case BS_CLOSE:
+		/* args: file descriptor */
+		if ( arg[0] > 2 ){
+			retcode = close( arg[0] );
+		} else {
+			retcode = 0;
+		}
+		break;
+	case BS_CREAT:
+		/* args: filename, mode */
+		ninStrGet( arg[0], buf );
+		retcode = creat(buf,arg[1]);
+		break;
+	case BS_OPEN:
+		/* args: filename, flags, mode */
+		ninStrGet( arg[0], buf );
+		retcode = open(buf,arg[1],arg[2]);
+		break;
+	case BS_READ:
+		/* args: file descriptor, buffer, count */
+		retcode = read(arg[0],buf,arg[2]);
+		if ( retcode > 0 ){
+			ninMemPut( arg[1], buf, retcode );
+		}
+		break;
+	case BS_SEEK:
+		/* args: file descriptor, offset, whence */
+		retcode = lseek(arg[0],arg[1],arg[2]);
+		break;
+	case BS_WRITE:
+		/* args: file descriptor, buffer, count */
+		ninMemGet( arg[1], buf, arg[2] );
+		retcode = write(arg[0],buf,arg[2]);
+		break;
+	default:
+		retcode = -1;
+		break;
+	}
+
+	/* Send request termination status to NINDY
+	 */
+	buf[0] = 'e';
+	store_unsigned_integer (&buf[1], 4, retcode);
+	send( buf, 5, NULL );
+}
+
+
+/******************************************************************************
+ * ninStopWhy:
+ *	Assume the application program has stopped (i.e., a DLE was received
+ *	from NINDY).  Ask NINDY for status information describing the
+ *	reason for the halt.
+ *
+ *	Returns a non-zero value if the user program has exited, 0 otherwise.
+ *	Also returns the following information, through passed pointers:
+ *           - why: an exit code if program the exited; otherwise the reason
+ *			why the program halted (see stop.h for values).
+ *	    - contents of register ip (little-endian byte order)
+ *	    - contents of register sp (little-endian byte order)
+ *	    - contents of register fp (little-endian byte order)
+ ******************************************************************************/
+char
+ninStopWhy( whyp, ipp, fpp, spp )
+    unsigned char *whyp; /* Return the 'why' code through this pointer	*/
+    long *ipp;	/* Return contents of register ip through this pointer	*/
+    long *fpp;	/* Return contents of register fp through this pointer	*/
+    long *spp;	/* Return contents of register sp through this pointer	*/
+{
+	unsigned char buf[30];
+	extern char OninStopWhy ();
+
+	if ( old_nindy ){
+		return OninStopWhy( whyp, ipp, fpp, spp );
+	}
+	send((unsigned char *) "?", 1, buf );
+
+	*whyp = buf[1];
+	memcpy ((char *)ipp, &buf[2],  sizeof (*ipp));
+	memcpy ((char *)fpp, &buf[6],  sizeof (*ipp));
+	memcpy ((char *)spp, &buf[10], sizeof (*ipp));
+	return buf[0];
+}
+
+/******************************************************************************
+ * ninStrGet:
+ *	Read a '\0'-terminated string of data out of the 960 memory space.
+ *
+ ******************************************************************************/
+static
+ninStrGet( ninaddr, hostaddr )
+     unsigned long ninaddr;	/* Address of string in NINDY memory space */
+     unsigned char *hostaddr;	/* Address of the buffer to which string should
+				 *	be copied.
+				 */
+{
+	unsigned char cmd[5];
+
+	cmd[0] = '"';
+	store_unsigned_integer (&cmd[1], 4, ninaddr);
+	send( cmd, 5, hostaddr );
+}
+
+#if 0
+/* Not used.  */
+
+/******************************************************************************
+ * ninVersion:
+ *	Ask NINDY for version information about itself.
+ *	The information is sent as an ascii string in the form "x.xx,<arch>",
+ *	where,
+ *		x.xx	is the version number
+ *		<arch>	is the processor architecture: "KA", "KB", "MC", "CA" *
+ *
+ ******************************************************************************/
+int
+ninVersion( p )
+     unsigned char *p;		/* Where to place version string */
+{
+
+	if ( old_nindy ){
+		return OninVersion( p );
+	}
+	send((unsigned char *) "v", 1, p );
+	return strlen(p);
+}
+#endif /* 0 */
diff --git a/gdb/nindy-share/stop.h b/gdb/nindy-share/stop.h
new file mode 100644
index 0000000..82a90a5
--- /dev/null
+++ b/gdb/nindy-share/stop.h
@@ -0,0 +1,86 @@
+/******************************************************************
+   Copyright 1990, 1992 Free Software Foundation, Inc.
+
+   This code was donated by Intel Corp.
+
+   Intel hereby grants you permission to copy, modify, and
+   distribute this software and its documentation.  Intel grants
+   this permission provided that the above copyright notice
+   appears in all copies and that both the copyright notice and
+   this permission notice appear in supporting documentation.  In
+   addition, Intel grants this permission provided that you
+   prominently mark as not part of the original any modifications
+   made to this software or documentation, and that the name of
+   Intel Corporation not be used in advertising or publicity
+   pertaining to distribution of the software or the documentation
+   without specific, written prior permission.
+
+   Intel Corporation does not warrant, guarantee or make any
+   representations regarding the use of, or the results of the use
+   of, the software and documentation in terms of correctness,
+   accuracy, reliability, currentness, or otherwise; and you rely
+   on the software, documentation and results solely at your own
+   risk.							  */
+/******************************************************************/
+
+
+/******************************************************************
+ *
+ *   REASONS WHY NINDY CAN STOP EXECUTING AN APPLICATION PROGRAM
+ *
+ * When NINDY stops executing an application program that was running
+ * under remote host ("gdb") control, it signals the host by sending
+ * a single ^P.  The host can then query as to the reason for the halt.
+ * NINDY responds with two bytes of information.
+ *
+ * The first byte is a boolean flag that indicates whether or not
+ * the application has exited.
+ *
+ * If the flag is true, the second byte contains the exit code.
+ *
+ * If the flag is false, the second byte contains a "reason for
+ * stopping" code.  This file defines the possible values of that
+ * code.
+ *
+ * There are three categories of reasons why the halt may have occurred:
+ * faults, traces, and software interactions.  The first two categories
+ * are processor-dependent; the values of these codes are tightly coupled
+ * to the hardware and should not be changed without first examining
+ * src/nindy/common/fault.c.  The software interactions involve
+ * communication between NINDY and the host debugger;  their codes are
+ * arbitrary.
+ *
+ ******************************************************************/
+
+#define FAULT_PARALLEL	0x00
+#define FAULT_UNKNOWN	0x01
+#define FAULT_OPERATION	0x02
+#define FAULT_ARITH	0x03
+#define FAULT_FP	0x04
+#define FAULT_CONSTR	0x05
+#define FAULT_VM	0x06
+#define FAULT_PROTECT	0x07
+#define FAULT_MACHINE	0x08
+#define FAULT_STRUCT	0x09
+#define FAULT_TYPE	0x0a
+	/* 0x0b reserved */
+#define FAULT_PROCESS	0x0c
+#define FAULT_DESC	0x0d
+#define FAULT_EVENT	0x0e
+	/* 0x0f reserved */
+
+#define LAST_FAULT      0x0f
+
+#define TRACE_STEP	0x10
+#define TRACE_BRANCH	0x11
+#define TRACE_CALL	0x12
+#define TRACE_RET	0x13
+#define TRACE_PRERET	0x14
+#define TRACE_SVC	0x15
+#define TRACE_BKPT	0x16
+
+#define STOP_SRQ	0xfe
+	/* Application program has service request to make of host */
+
+#define STOP_GDB_BPT    0xff
+	/* Application program has reached breakpoint (fmark) set by host */
diff --git a/gdb/nindy-share/ttyflush.c b/gdb/nindy-share/ttyflush.c
new file mode 100644
index 0000000..9754472
--- /dev/null
+++ b/gdb/nindy-share/ttyflush.c
@@ -0,0 +1,53 @@
+/* This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This started out life as code shared between the nindy monitor and
+   GDB.  For various reasons, this is no longer true.  Eventually, it
+   probably should be merged into remote-nindy.c.  */
+
+#include <stdio.h>
+#include "defs.h"
+#include "serial.h"
+
+#ifdef _MSC_VER
+# include <stdlib.h>
+# define sleep _sleep
+#endif
+
+/* Flush all pending input and output for SERIAL, wait for a second, and
+   then if there is a character pending, discard it and flush again.  */
+
+int
+tty_flush (serial)
+     serial_t serial;
+{
+  while (1)
+    {
+      SERIAL_FLUSH_INPUT (serial);
+      SERIAL_FLUSH_OUTPUT (serial);
+      sleep(1);
+      switch (SERIAL_READCHAR (serial, 0))
+	{
+	case SERIAL_TIMEOUT:
+	case SERIAL_ERROR:
+	case SERIAL_EOF:
+	  return 0;
+	default:
+	  /* We read something.  Eeek.  Try again.  */
+	  break;
+	}
+    }
+}
diff --git a/gdb/nindy-tdep.c b/gdb/nindy-tdep.c
new file mode 100644
index 0000000..2e0b10c
--- /dev/null
+++ b/gdb/nindy-tdep.c
@@ -0,0 +1,74 @@
+/* Target-machine dependent code for the NINDY monitor running on the Intel 960
+   Copyright (C) 1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Miscellaneous NINDY-dependent routines.
+   Some replace macros normally defined in "tm.h".  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "frame.h"
+#include "gdbcore.h"
+
+/* 'start_frame' is a variable in the NINDY runtime startup routine
+   that contains the frame pointer of the 'start' routine (the routine
+   that calls 'main').  By reading its contents out of remote memory,
+   we can tell where the frame chain ends:  backtraces should halt before
+   they display this frame.  */
+
+int
+nindy_frame_chain_valid (chain, curframe)
+    CORE_ADDR chain;
+    struct frame_info *curframe;
+{
+	struct symbol *sym;
+	struct minimal_symbol *msymbol;
+
+	/* crtnindy.o is an assembler module that is assumed to be linked
+	 * first in an i80960 executable.  It contains the true entry point;
+	 * it performs startup up initialization and then calls 'main'.
+	 *
+	 * 'sf' is the name of a variable in crtnindy.o that is set
+	 *	during startup to the address of the first frame.
+	 *
+	 * 'a' is the address of that variable in 80960 memory.
+	 */
+	static char sf[] = "start_frame";
+	CORE_ADDR a;
+
+
+	chain &= ~0x3f; /* Zero low 6 bits because previous frame pointers
+			   contain return status info in them.  */
+	if ( chain == 0 ){
+		return 0;
+	}
+
+	sym = lookup_symbol(sf, 0, VAR_NAMESPACE, (int *)NULL, 
+				  (struct symtab **)NULL);
+	if ( sym != 0 ){
+		a = SYMBOL_VALUE (sym);
+	} else {
+		msymbol = lookup_minimal_symbol (sf, NULL, NULL);
+		if (msymbol == NULL)
+			return 0;
+		a = SYMBOL_VALUE_ADDRESS (msymbol);
+	}
+
+	return ( chain != read_memory_integer(a,4) );
+}
diff --git a/gdb/nlm/Makefile.in b/gdb/nlm/Makefile.in
new file mode 100644
index 0000000..5451138
--- /dev/null
+++ b/gdb/nlm/Makefile.in
@@ -0,0 +1,172 @@
+#Copyright 1989, 1990, 91, 92, 93, 94, 95, 1999 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+bindir = @bindir@
+libdir = @libdir@
+tooldir = $(libdir)/$(target_alias)
+
+datadir = @datadir@
+mandir = @mandir@
+man1dir = $(mandir)/man1
+man2dir = $(mandir)/man2
+man3dir = $(mandir)/man3
+man4dir = $(mandir)/man4
+man5dir = $(mandir)/man5
+man6dir = $(mandir)/man6
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+man9dir = $(mandir)/man9
+infodir = @infodir@
+includedir = @includedir@
+
+SHELL = @SHELL@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+CC_FOR_TARGET = ` \
+  if [ -f ../../gcc/xgcc ] ; then \
+    echo ../../gcc/xgcc -B../../gcc/; \
+  else \
+    t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
+  fi`
+
+NLMCONV_FOR_TARGET = ` \
+  if [ -f ../../binutils/nlmconv ] ; then \
+    echo ../../binutils/nlmconv; \
+  else \
+    t='$(program_transform_name)'; echo nlmconv | sed -e '' $$t; \
+  fi`
+
+# All the includes used for CFLAGS and for lint.
+INCLUDE_CFLAGS = -I. -I${srcdir}
+
+# CFLAGS is specifically reserved for setting from the command line
+# when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
+CFLAGS = -g
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = ${CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS} 
+LDFLAGS = $(CFLAGS)
+
+# Perhaps should come from parent Makefile
+VERSION = gdbserve-4.12
+DIST=gdb
+
+# target-dependent makefile fragment come in here.
+@target_makefile_frag@
+# End target-dependent makefile fragment
+
+# All source files that go into linking GDB remote server.
+
+DEPFILES = $(GDBSERVE_DEPFILES)
+
+SOURCES = $(ALLDEPFILES)
+TAGFILES = $(SOURCES) ${HFILES} ${ALLPARAM} ${POSSLIBS} 
+
+# Prevent Sun make from putting in the machine type.  Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+	${CC_FOR_TARGET} -c ${INTERNAL_CFLAGS} $<
+
+.S.o:
+	${CC_FOR_TARGET} -c ${INTERNAL_CFLAGS} $<
+
+all: gdbserve.nlm
+
+# Traditionally "install" depends on "all".  But it may be useful
+# not to; for example, if the user has made some trivial change to a 
+# source file and doesn't care about rebuilding or just wants to save the
+# time it takes for make to check that all is up to date.
+# install-only is intended to address that need.
+install: all install-only
+install-only: 
+	$(INSTALL) gdbserve.nlm $(bindir)/gdbserve.nlm
+
+uninstall: force
+	rm -f $(bindir)/gdbserve.nlm
+
+installcheck:
+check:
+info dvi:
+install-info:
+clean-info:
+
+gdbserve.nlm:	gdbserve.O $(srcdir)/gdbserve.def
+	${NLMCONV_FOR_TARGET} -T $(srcdir)/gdbserve.def
+
+gdbserve.O: prelude.o gdbserve.o $(TDEPFILES)
+	${CC_FOR_TARGET} $(LDFLAGS) -r -o gdbserve.O prelude.o gdbserve.o ${TDEPFILES}
+
+# Put the proper machine-specific files first, so M-. on a machine
+# specific routine gets the one for the correct machine.
+# The xyzzy stuff below deals with empty DEPFILES
+TAGS:	${TAGFILES}
+	etags `find ${srcdir}/../config -name $(TM_FILE) -print` \
+	  `find ${srcdir}/../config -name ${XM_FILE} -print` \
+	  `find ${srcdir}/../config -name ${NAT_FILE} -print` \
+	  `for i in yzzy ${DEPFILES}; do \
+	     if [ x$$i != xyzzy ]; then \
+	       echo ${srcdir}/$$i | sed -e 's/\.o$$/\.c/' ; \
+	     fi; \
+	   done` \
+	  ${TAGFILES}
+tags: TAGS
+
+clean:
+	rm -f *.o ${ADD_FILES} *~
+	rm -f gdbserve.O gdbserve.nlm core make.log
+
+distclean: clean TAGS
+	rm -f config.log config.cache config.status
+	rm -f Makefile
+
+maintainer-clean realclean: clean
+	rm -f TAGS
+	rm -f config.log config.cache config.status
+	rm -f Makefile
+
+Makefile: Makefile.in config.status @target_makefile_frag_path@
+	$(SHELL) config.status
+
+config.status: configure
+	$(SHELL) config.status --recheck
+
+force:
+
+# GNU Make has an annoying habit of putting *all* the Makefile variables
+# into the environment, unless you include this target as a circumvention.
+# Rumor is that this will be fixed (and this target can be removed)
+# in GNU Make 4.0.
+.NOEXPORT:
+
+# GNU Make 3.63 has a different problem: it keeps tacking command line
+# overrides onto the definition of $(MAKE).  This variable setting
+# will remove them.
+MAKEOVERRIDES=
+
+# This is the end of "Makefile.in".
diff --git a/gdb/nlm/configure b/gdb/nlm/configure
new file mode 100755
index 0000000..3918fee
--- /dev/null
+++ b/gdb/nlm/configure
@@ -0,0 +1,1074 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.2 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.2"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=gdbserve.c
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:666: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Map target cpu into the config cpu subdirectory name.
+# The default is $target_cpu.
+case "${target_cpu}" in
+alpha)			gdb_target_cpu=alpha ;;
+c[12])			gdb_target_cpu=convex ;;
+hppa*)			gdb_target_cpu=pa ;;
+i[3456]86)		gdb_target_cpu=i386 ;;
+m68*)			gdb_target_cpu=m68k ;;
+np1)			gdb_target_cpu=gould ;;
+pn)			gdb_target_cpu=gould ;;
+pyramid)		gdb_target_cpu=pyr ;;
+sparc*)			gdb_target_cpu=sparc ;;
+*)			gdb_target_cpu=$target_cpu ;;
+esac
+
+target_makefile_frag=${srcdir}/../config/${gdb_target_cpu}/gdbserve.mt
+if  ! -f ${target_makefile_frag} ; then
+	{ echo "configure: error: "*** GDBSERVE does not support target ${target}"" 1>&2; exit 1; }
+fi
+
+target_makefile_frag_path=$target_makefile_frag
+
+
+
+cpufile=`sed -n '
+s/CPU_FILE 	*= 	*\(^ 	*\)/\1/p
+' ${target_makefile_frag}
+
+files=
+links=
+rm -f cpu.h
+if  "${cpufile}" != "" ; then
+	files="${files} ${cpufile}.h"
+	links="${links} cpu.h"
+fi
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@target_makefile_frag_path@%$target_makefile_frag_path%g
+/@target_makefile_frag@/r $target_makefile_frag
+s%@target_makefile_frag@%%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$files"
+ac_dests="$links"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+  set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+  set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+  echo "linking $srcdir/$ac_source to $ac_dest"
+
+  if test ! -r $srcdir/$ac_source; then
+    { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+  fi
+  rm -f $ac_dest
+
+  # Make relative symlinks.
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+    # The dest file is in a subdirectory.
+    test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+    ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dest_dir_suffix.
+    ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dest_dir_suffix= ac_dots=
+  fi
+
+  case "$srcdir" in
+  [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+  *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+  esac
+
+  # Make a symlink if possible; otherwise try a hard link.
+  if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+    ln $srcdir/$ac_source $ac_dest; then :
+  else
+    { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+  fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+
diff --git a/gdb/nlm/configure.in b/gdb/nlm/configure.in
new file mode 100644
index 0000000..845b486
--- /dev/null
+++ b/gdb/nlm/configure.in
@@ -0,0 +1,55 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.12.1)dnl
+AC_INIT(gdbserve.c)
+
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+AC_PROG_INSTALL
+
+# Map target cpu into the config cpu subdirectory name.
+# The default is $target_cpu.
+changequote(,)dnl
+case "${target_cpu}" in
+alpha)			gdb_target_cpu=alpha ;;
+c[12])			gdb_target_cpu=convex ;;
+hppa*)			gdb_target_cpu=pa ;;
+i[3456]86)		gdb_target_cpu=i386 ;;
+m68*)			gdb_target_cpu=m68k ;;
+np1)			gdb_target_cpu=gould ;;
+pn)			gdb_target_cpu=gould ;;
+pyramid)		gdb_target_cpu=pyr ;;
+sparc*)			gdb_target_cpu=sparc ;;
+*)			gdb_target_cpu=$target_cpu ;;
+esac
+changequote([,])dnl
+
+target_makefile_frag=${srcdir}/../config/${gdb_target_cpu}/gdbserve.mt
+if [ ! -f ${target_makefile_frag} ]; then
+	AC_MSG_ERROR("*** GDBSERVE does not support target ${target}")
+fi
+
+dnl We have to assign the same value to other variables because autoconf
+dnl doesn't provide a mechanism to substitute a replacement keyword with
+dnl arbitrary data or pathnames.
+dnl
+target_makefile_frag_path=$target_makefile_frag
+AC_SUBST(target_makefile_frag_path)
+AC_SUBST_FILE(target_makefile_frag)
+
+cpufile=`sed -n '
+s/CPU_FILE[ 	]*=[ 	]*\([^ 	]*\)/\1/p
+' ${target_makefile_frag}
+
+files=
+links=
+rm -f cpu.h
+if [ "${cpufile}" != "" ]; then
+	files="${files} ${cpufile}.h"
+	links="${links} cpu.h"
+fi
+
+AC_LINK_FILES($files, $links)
+AC_OUTPUT(Makefile)
+
diff --git a/gdb/nlm/gdbserve.c b/gdb/nlm/gdbserve.c
new file mode 100644
index 0000000..62adf3a
--- /dev/null
+++ b/gdb/nlm/gdbserve.c
@@ -0,0 +1,1056 @@
+/* gdbserve.c -- NLM debugging stub for Novell NetWare.
+
+   This is originally based on an m68k software stub written by Glenn
+   Engel at HP, but has changed quite a bit.  It was modified for the
+   i386 by Jim Kingdon, Cygnus Support.  It was modified to run under
+   NetWare by Ian Lance Taylor, Cygnus Support.
+
+   This code is intended to produce an NLM (a NetWare Loadable Module)
+   to run under Novell NetWare.  To create the NLM, compile this code
+   into an object file using the NLM SDK on any i386 host, and use the
+   nlmconv program (available in the GNU binutils) to transform the
+   resulting object file into an NLM.  */
+
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <errno.h>
+#include <time.h>
+
+#ifdef __i386__
+#include <dfs.h>
+#include <conio.h>
+#include <advanced.h>
+#include <debugapi.h>
+#include <process.h>
+#else
+#include <nwtypes.h>
+#include <nwdfs.h>
+#include <nwconio.h>
+#include <nwadv.h>
+#include <nwdbgapi.h>
+#include <nwthread.h>
+#endif
+
+#include <aio.h>
+#include "cpu.h"
+
+
+/****************************************************/
+/* This information is from Novell.  It is not in any of the standard
+   NetWare header files.  */
+
+struct DBG_LoadDefinitionStructure
+{
+	void *reserved1[4];
+	LONG reserved5;
+	LONG LDCodeImageOffset;
+	LONG LDCodeImageLength;
+	LONG LDDataImageOffset;
+	LONG LDDataImageLength;
+	LONG LDUninitializedDataLength;
+	LONG LDCustomDataOffset;
+	LONG LDCustomDataSize;
+	LONG reserved6[2];
+	LONG (*LDInitializationProcedure)(void);
+};
+
+#define LO_NORMAL		0x0000
+#define LO_STARTUP		0x0001
+#define LO_PROTECT		0x0002
+#define LO_DEBUG		0x0004
+#define LO_AUTO_LOAD  		0x0008
+
+/* Loader returned error codes */
+#define LOAD_COULD_NOT_FIND_FILE		1
+#define LOAD_ERROR_READING_FILE			2
+#define LOAD_NOT_NLM_FILE_FORMAT		3
+#define LOAD_WRONG_NLM_FILE_VERSION		4
+#define LOAD_REENTRANT_INITIALIZE_FAILURE	5
+#define LOAD_CAN_NOT_LOAD_MULTIPLE_COPIES	6
+#define LOAD_ALREADY_IN_PROGRESS		7
+#define LOAD_NOT_ENOUGH_MEMORY			8
+#define LOAD_INITIALIZE_FAILURE			9
+#define LOAD_INCONSISTENT_FILE_FORMAT		10
+#define LOAD_CAN_NOT_LOAD_AT_STARTUP		11
+#define LOAD_AUTO_LOAD_MODULES_NOT_LOADED	12
+#define LOAD_UNRESOLVED_EXTERNAL		13
+#define LOAD_PUBLIC_ALREADY_DEFINED		14
+/****************************************************/
+
+/* The main thread ID.  */
+static int mainthread;
+
+/* An error message for the main thread to print.  */
+static char *error_message;
+
+/* The AIO port handle.  */
+static int AIOhandle;
+
+/* BUFMAX defines the maximum number of characters in inbound/outbound
+   buffers.  At least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX (REGISTER_BYTES * 2 + 16)
+
+/* remote_debug > 0 prints ill-formed commands in valid packets and
+   checksum errors. */
+static int remote_debug = 1;
+
+static const char hexchars[] = "0123456789abcdef";
+
+unsigned char breakpoint_insn[] = BREAKPOINT;
+
+char *mem2hex (void *mem, char *buf, int count, int may_fault);
+char *hex2mem (char *buf, void *mem, int count, int may_fault);
+extern void set_step_traps (struct StackFrame *);
+extern void clear_step_traps (struct StackFrame *);
+
+static int __main() {};
+
+/* Read a character from the serial port.  This must busy wait, but
+   that's OK because we will be the only thread running anyhow.  */
+
+static int
+getDebugChar ()
+{
+  int err;
+  LONG got;
+  unsigned char ret;
+
+  do
+    {
+      err = AIOReadData (AIOhandle, (char *) &ret, 1, &got);
+      if (err != 0)
+	{
+	  error_message = "AIOReadData failed";
+	  ResumeThread (mainthread);
+	  return -1;
+	}
+    }
+  while (got == 0);
+
+  return ret;
+}
+
+/* Write a character to the serial port.  Returns 0 on failure,
+   non-zero on success.  */
+
+static int
+putDebugChar (c)
+     unsigned char c;
+{
+  int err;
+  LONG put;
+
+  put = 0;
+  while (put < 1)
+    {
+      err = AIOWriteData (AIOhandle, (char *) &c, 1, &put);
+      if (err != 0)
+	ConsolePrintf ("AIOWriteData: err = %d, put = %d\r\n", err, put);
+    }
+  return 1;
+}
+
+/* Turn a hex character into a number.  */
+
+static int
+hex (ch)
+     char ch;
+{
+  if ((ch >= 'a') && (ch <= 'f'))
+    return (ch-'a'+10);
+  if ((ch >= '0') && (ch <= '9'))
+    return (ch-'0');
+  if ((ch >= 'A') && (ch <= 'F'))
+    return (ch-'A'+10);
+  return (-1);
+}
+
+/* Scan for the sequence $<data>#<checksum>.  Returns 0 on failure,
+   non-zero on success.  */
+
+static int
+getpacket (buffer)
+     char * buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int i;
+  int count;
+  int ch;
+
+  do
+    {
+      /* wait around for the start character, ignore all other characters */
+      while ((ch = getDebugChar()) != '$')
+	if (ch == -1)
+	  return 0;
+      checksum = 0;
+      xmitcsum = -1;
+
+      count = 0;
+
+      /* now, read until a # or end of buffer is found */
+      while (count < BUFMAX)
+	{
+	  ch = getDebugChar();
+	  if (ch == -1)
+	    return 0;
+	  if (ch == '#')
+	    break;
+	  checksum = checksum + ch;
+	  buffer[count] = ch;
+	  count = count + 1;
+	}
+      buffer[count] = 0;
+
+      if (ch == '#')
+	{
+	  ch = getDebugChar ();
+	  if (ch == -1)
+	    return 0;
+	  xmitcsum = hex(ch) << 4;
+	  ch = getDebugChar ();
+	  if (ch == -1)
+	    return 0;
+	  xmitcsum += hex(ch);
+
+	  if (checksum != xmitcsum)
+	    {
+	      if (remote_debug)
+		ConsolePrintf ("bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
+			       checksum,xmitcsum,buffer);
+	      /* failed checksum */
+	      if (! putDebugChar('-'))
+		return 0;
+	      return 1;
+	    }
+	  else
+	    {
+	      /* successful transfer */
+	      if (! putDebugChar('+'))
+		return 0;
+	      /* if a sequence char is present, reply the sequence ID */
+	      if (buffer[2] == ':')
+		{
+		  if (! putDebugChar (buffer[0])
+		      || ! putDebugChar (buffer[1]))
+		    return 0;
+		  /* remove sequence chars from buffer */
+		  count = strlen(buffer);
+		  for (i=3; i <= count; i++)
+		    buffer[i-3] = buffer[i];
+		}
+	    }
+	}
+    }
+  while (checksum != xmitcsum);
+
+  if (remote_debug)
+    ConsolePrintf ("Received packet \"%s\"\r\n", buffer);
+
+  return 1;
+}
+
+/* Send the packet in buffer.  Returns 0 on failure, non-zero on
+   success.  */
+
+static int
+putpacket (buffer)
+     char * buffer;
+{
+  unsigned char checksum;
+  int count;
+  int ch;
+
+  if (remote_debug)
+    ConsolePrintf ("Sending packet \"%s\"\r\n", buffer);
+
+  /*  $<packet info>#<checksum>. */
+  do
+    {
+      if (! putDebugChar('$'))
+	return 0;
+      checksum = 0;
+      count = 0;
+
+      while (ch=buffer[count])
+	{
+	  if (! putDebugChar(ch))
+	    return 0;
+	  checksum += ch;
+	  count += 1;
+	}
+
+      if (! putDebugChar('#')
+	  || ! putDebugChar(hexchars[checksum >> 4])
+	  || ! putDebugChar(hexchars[checksum % 16]))
+	return 0;
+
+      ch = getDebugChar ();
+      if (ch == -1)
+	return 0;
+    }
+  while (ch != '+');
+
+  return 1;
+}
+
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+static short error;
+
+static void
+debug_error (format, parm)
+     char *format;
+     char *parm;
+{
+  if (remote_debug)
+    {
+      ConsolePrintf (format, parm);
+      ConsolePrintf ("\n");
+    }
+}
+
+/* This is set if we could get a memory access fault.  */
+static int mem_may_fault;
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+   error.  */
+volatile int mem_err = 0;
+
+#ifndef ALTERNATE_MEM_FUNCS
+/* These are separate functions so that they are so short and sweet
+   that the compiler won't save any registers (if there is a fault
+   to mem_fault, they won't get restored, so there better not be any
+   saved).  */
+
+int
+get_char (addr)
+     char *addr;
+{
+  return *addr;
+}
+
+void
+set_char (addr, val)
+     char *addr;
+     int val;
+{
+  *addr = val;
+}
+#endif /* ALTERNATE_MEM_FUNCS */
+
+/* convert the memory pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+/* If MAY_FAULT is non-zero, then we should set mem_err in response to
+   a fault; if zero treat a fault like any other fault in the stub.  */
+
+char *
+mem2hex (mem, buf, count, may_fault)
+     void *mem;
+     char *buf;
+     int count;
+     int may_fault;
+{
+  int i;
+  unsigned char ch;
+  char *ptr = mem;
+
+  mem_may_fault = may_fault;
+  for (i = 0; i < count; i++)
+    {
+      ch = get_char (ptr++);
+      if (may_fault && mem_err)
+	return (buf);
+      *buf++ = hexchars[ch >> 4];
+      *buf++ = hexchars[ch % 16];
+    }
+  *buf = 0;
+  mem_may_fault = 0;
+  return(buf);
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem */
+/* return a pointer to the character AFTER the last byte written */
+
+char *
+hex2mem (buf, mem, count, may_fault)
+     char *buf;
+     void *mem;
+     int count;
+     int may_fault;
+{
+  int i;
+  unsigned char ch;
+  char *ptr = mem;
+
+  mem_may_fault = may_fault;
+  for (i=0;i<count;i++)
+    {
+      ch = hex(*buf++) << 4;
+      ch = ch + hex(*buf++);
+      set_char (ptr++, ch);
+      if (may_fault && mem_err)
+	return (ptr);
+    }
+  mem_may_fault = 0;
+  return(mem);
+}
+
+/* This function takes the 386 exception vector and attempts to
+   translate this number into a unix compatible signal value.  */
+
+int
+computeSignal (exceptionVector)
+     int exceptionVector;
+{
+  int sigval;
+  switch (exceptionVector)
+    {
+    case 0 : sigval = 8; break; /* divide by zero */
+    case 1 : sigval = 5; break; /* debug exception */
+    case 3 : sigval = 5; break; /* breakpoint */
+    case 4 : sigval = 16; break; /* into instruction (overflow) */
+    case 5 : sigval = 16; break; /* bound instruction */
+    case 6 : sigval = 4; break; /* Invalid opcode */
+    case 7 : sigval = 8; break; /* coprocessor not available */
+    case 8 : sigval = 7; break; /* double fault */
+    case 9 : sigval = 11; break; /* coprocessor segment overrun */
+    case 10 : sigval = 11; break; /* Invalid TSS */
+    case 11 : sigval = 11; break; /* Segment not present */
+    case 12 : sigval = 11; break; /* stack exception */
+    case 13 : sigval = 11; break; /* general protection */
+    case 14 : sigval = 11; break; /* page fault */
+    case 16 : sigval = 7; break; /* coprocessor error */
+    default:
+      sigval = 7;		/* "software generated"*/
+    }
+  return (sigval);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+static int
+hexToInt(ptr, intValue)
+     char **ptr;
+     int *intValue;
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+
+  while (**ptr)
+    {
+      hexValue = hex(**ptr);
+      if (hexValue >=0)
+	{
+	  *intValue = (*intValue <<4) | hexValue;
+	  numChars ++;
+	}
+      else
+	break;
+
+      (*ptr)++;
+    }
+
+  return (numChars);
+}
+
+/* This function does all command processing for interfacing to gdb.
+   It is called whenever an exception occurs in the module being
+   debugged.  */
+
+static LONG
+handle_exception (frame)
+     struct StackFrame *frame;
+{
+  int addr, length;
+  char *ptr;
+  static struct DBG_LoadDefinitionStructure *ldinfo = 0;
+  static unsigned char first_insn[BREAKPOINT_SIZE]; /* The first instruction in the program.  */
+
+#if 0
+  /* According to some documentation from Novell, the bell sometimes
+     may be ringing at this point.  This can be stopped on Netware 4
+     systems by calling the undocumented StopBell() function. */
+
+  StopBell ();
+#endif
+
+  if (remote_debug)
+    {
+      ConsolePrintf ("vector=%d: %s, pc=%08x, thread=%08x\r\n",
+		     frame->ExceptionNumber,
+		     frame->ExceptionDescription,
+		     frame->ExceptionPC,
+		     GetThreadID ());
+    }
+
+  switch (frame->ExceptionNumber)
+    {
+    case START_NLM_EVENT:
+      /* If the NLM just started, we record the module load information
+	 and the thread ID, and set a breakpoint at the first instruction
+	 in the program.  */
+
+      ldinfo = ((struct DBG_LoadDefinitionStructure *)
+		frame->ExceptionErrorCode);
+      memcpy (first_insn, ldinfo->LDInitializationProcedure,
+	      BREAKPOINT_SIZE);
+      memcpy (ldinfo->LDInitializationProcedure, breakpoint_insn,
+	      BREAKPOINT_SIZE);
+      flush_i_cache ();
+      return RETURN_TO_PROGRAM;
+
+    case ENTER_DEBUGGER_EVENT:
+    case KEYBOARD_BREAK_EVENT:
+      /* Pass some events on to the next debugger, in case it will handle
+	 them.  */
+      return RETURN_TO_NEXT_DEBUGGER;
+
+    case 3:			/* Breakpoint */
+      /* After we've reached the initial breakpoint, reset it.  */
+      if (frame->ExceptionPC - DECR_PC_AFTER_BREAK == (LONG) ldinfo->LDInitializationProcedure
+	  && memcmp (ldinfo->LDInitializationProcedure, breakpoint_insn,
+		     BREAKPOINT_SIZE) == 0)
+	{
+	  memcpy (ldinfo->LDInitializationProcedure, first_insn,
+		  BREAKPOINT_SIZE);
+	  frame->ExceptionPC -= DECR_PC_AFTER_BREAK;
+	  flush_i_cache ();
+	}
+      /* Normal breakpoints end up here */
+      do_status (remcomOutBuffer, frame);
+      break;
+
+    default:
+      /* At the moment, we don't care about most of the unusual NetWare
+	 exceptions.  */
+      if (frame->ExceptionNumber > 31)
+	return RETURN_TO_PROGRAM;
+
+      /* Most machine level exceptions end up here */
+      do_status (remcomOutBuffer, frame);
+      break;
+
+    case 11:			/* Segment not present */
+    case 13:			/* General protection */
+    case 14:			/* Page fault */
+      /* If we get a GP fault, and mem_may_fault is set, and the
+	 instruction pointer is near set_char or get_char, then we caused
+	 the fault ourselves accessing an illegal memory location.  */
+      if (mem_may_fault
+	  && ((frame->ExceptionPC >= (long) &set_char
+	       && frame->ExceptionPC < (long) &set_char + 50)
+	      || (frame->ExceptionPC >= (long) &get_char
+		  && frame->ExceptionPC < (long) &get_char + 50)))
+	{
+	  mem_err = 1;
+	  /* Point the instruction pointer at an assembly language stub
+	     which just returns from the function.  */
+
+	  frame->ExceptionPC += 4; /* Skip the load or store */
+
+	  /* Keep going.  This will act as though it returned from
+	     set_char or get_char.  The calling routine will check
+	     mem_err, and do the right thing.  */
+	  return RETURN_TO_PROGRAM;
+	}
+      /* Random mem fault, report it */
+      do_status (remcomOutBuffer, frame);
+      break;
+
+    case TERMINATE_NLM_EVENT:
+      /* There is no way to get the exit status.  */
+      sprintf (remcomOutBuffer, "W%02x", 0);
+      break;			/* We generate our own status */
+    }
+
+  /* FIXME: How do we know that this exception has anything to do with
+     the program we are debugging?  We can check whether the PC is in
+     the range of the module we are debugging, but that doesn't help
+     much since an error could occur in a library routine.  */
+
+  clear_step_traps (frame);
+
+  if (! putpacket(remcomOutBuffer))
+    return RETURN_TO_NEXT_DEBUGGER;
+
+  if (frame->ExceptionNumber == TERMINATE_NLM_EVENT)
+    {
+      ResumeThread (mainthread);
+      return RETURN_TO_PROGRAM;
+    }
+
+  while (1)
+    {
+      error = 0;
+      remcomOutBuffer[0] = 0;
+      if (! getpacket (remcomInBuffer))
+	return RETURN_TO_NEXT_DEBUGGER;
+      switch (remcomInBuffer[0])
+	{
+	case '?':
+	  do_status (remcomOutBuffer, frame);
+	  break;
+	case 'd':
+	  remote_debug = !(remote_debug); /* toggle debug flag */
+	  break;
+	case 'g':
+	  /* return the value of the CPU registers */
+	  frame_to_registers (frame, remcomOutBuffer);
+	  break;
+	case 'G':
+	  /* set the value of the CPU registers - return OK */
+	  registers_to_frame (&remcomInBuffer[1], frame);
+	  strcpy(remcomOutBuffer,"OK");
+	  break;
+
+	case 'm':
+	  /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+	  /* TRY TO READ %x,%x.  IF SUCCEED, SET PTR = 0 */
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr,&addr))
+	    if (*(ptr++) == ',')
+	      if (hexToInt(&ptr,&length))
+		{
+		  ptr = 0;
+		  mem_err = 0;
+		  mem2hex((char*) addr, remcomOutBuffer, length, 1);
+		  if (mem_err)
+		    {
+		      strcpy (remcomOutBuffer, "E03");
+		      debug_error ("memory fault");
+		    }
+		}
+
+	  if (ptr)
+	    {
+	      strcpy(remcomOutBuffer,"E01");
+	      debug_error("malformed read memory command: %s",remcomInBuffer);
+	    }
+	  break;
+
+	case 'M':
+	  /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+	  /* TRY TO READ '%x,%x:'.  IF SUCCEED, SET PTR = 0 */
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr,&addr))
+	    if (*(ptr++) == ',')
+	      if (hexToInt(&ptr,&length))
+		if (*(ptr++) == ':')
+		  {
+		    mem_err = 0;
+		    hex2mem(ptr, (char*) addr, length, 1);
+
+		    if (mem_err)
+		      {
+			strcpy (remcomOutBuffer, "E03");
+			debug_error ("memory fault");
+		      }
+		    else
+		      {
+			strcpy(remcomOutBuffer,"OK");
+		      }
+
+		    ptr = 0;
+		  }
+	  if (ptr)
+	    {
+	      strcpy(remcomOutBuffer,"E02");
+	      debug_error("malformed write memory command: %s",remcomInBuffer);
+	    }
+	  break;
+
+	case 'c':
+	case 's':
+	  /* cAA..AA    Continue at address AA..AA(optional) */
+	  /* sAA..AA   Step one instruction from AA..AA(optional) */
+	  /* try to read optional parameter, pc unchanged if no parm */
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr,&addr))
+	    {
+/*	      registers[PC_REGNUM].lo = addr;*/
+	      fprintf (stderr, "Setting PC to 0x%x\n", addr);
+	      while (1);
+	    }
+
+	  if (remcomInBuffer[0] == 's')
+	    set_step_traps (frame);
+
+	  flush_i_cache ();
+	  return RETURN_TO_PROGRAM;
+
+	case 'k':
+	  /* kill the program */
+	  KillMe (ldinfo);
+	  ResumeThread (mainthread);
+	  return RETURN_TO_PROGRAM;
+
+	case 'q':		/* Query message */
+	  if (strcmp (&remcomInBuffer[1], "Offsets") == 0)
+	    {
+	      sprintf (remcomOutBuffer, "Text=%x;Data=%x;Bss=%x",
+		       ldinfo->LDCodeImageOffset,
+		       ldinfo->LDDataImageOffset,
+		       ldinfo->LDDataImageOffset + ldinfo->LDDataImageLength);
+	    }
+	  else
+	    sprintf (remcomOutBuffer, "E04, Unknown query %s", &remcomInBuffer[1]);
+	  break;
+	}
+
+      /* reply to the request */
+      if (! putpacket(remcomOutBuffer))
+	return RETURN_TO_NEXT_DEBUGGER;
+    }
+}
+
+char *progname;
+
+struct bitRate {
+  BYTE bitRate;
+  const char *bitRateString;
+};
+
+struct bitRate bitRateTable[] = 
+{
+  { AIO_BAUD_50    ,      "50" },
+  { AIO_BAUD_75    ,      "75" },
+  { AIO_BAUD_110   ,     "110" },
+  { AIO_BAUD_134p5 ,   "134.5" },
+  { AIO_BAUD_150   ,     "150" },
+  { AIO_BAUD_300   ,     "300" },
+  { AIO_BAUD_600   ,     "600" },
+  { AIO_BAUD_1200  ,    "1200" },
+  { AIO_BAUD_1800  ,    "1800" },
+  { AIO_BAUD_2000  ,    "2000" },
+  { AIO_BAUD_2400  ,    "2400" },
+  { AIO_BAUD_3600  ,    "3600" },
+  { AIO_BAUD_4800  ,    "4800" },
+  { AIO_BAUD_7200  ,    "7200" },
+  { AIO_BAUD_9600  ,    "9600" },
+  { AIO_BAUD_19200 ,   "19200" },
+  { AIO_BAUD_38400 ,   "38400" },
+  { AIO_BAUD_57600 ,   "57600" },
+  { AIO_BAUD_115200,  "115200" },
+  { -1, NULL }
+};
+
+char dataBitsTable[] = "5678";
+
+char *stopBitsTable[] = { "1", "1.5", "2" };
+
+char parity[] = "NOEMS";
+
+/* Start up.  The main thread opens the named serial I/O port, loads
+   the named NLM module and then goes to sleep.  The serial I/O port
+   is named as a board number and a port number.  It would be more DOS
+   like to provide a menu of available serial ports, but I don't want
+   to have to figure out how to do that.  */
+
+int
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  int hardware, board, port;
+  BYTE bitRate;
+  BYTE dataBits;
+  BYTE stopBits;
+  BYTE parityMode;
+  LONG err;
+  struct debuggerStructure s;
+  int cmdindx;
+  char *cmdlin;
+  int i;
+
+  /* set progname */
+  progname = "gdbserve";
+
+  /* set default serial line */
+  hardware = -1;
+  board = 0;
+  port = 0;
+
+  /* set default serial line characteristics */
+  bitRate  = AIO_BAUD_9600;
+  dataBits = AIO_DATA_BITS_8;
+  stopBits = AIO_STOP_BITS_1;
+  parityMode = AIO_PARITY_NONE;
+
+  cmdindx = 0;
+  for (argc--, argv++; *argv; argc--, argv++) 
+    {
+      char *bp;
+      char *ep;
+
+      if (strnicmp(*argv, "BAUD=", 5) == 0) 
+	{
+	  struct bitRate *brp;
+
+	  bp = *argv + 5;
+	  for (brp = bitRateTable; brp->bitRate != (BYTE) -1; brp++) 
+	    {
+	      if (strcmp(brp->bitRateString, bp) == 0) 
+		{
+		  bitRate = brp->bitRate;
+		  break;
+		}
+	    }
+
+	  if (brp->bitRateString == NULL) 
+	    {
+	      fprintf(stderr, "%s: %s: unknown or unsupported bit rate",
+		      progname, bp);
+	      exit (1);
+	    }
+	}
+      else if (strnicmp(*argv, "BOARD=", 6) == 0) 
+        {
+	  bp = *argv + 6;
+	  board = strtol (bp, &ep, 0);
+	  if (ep == bp || *ep != '\0') 
+	    {
+	      fprintf (stderr, "%s: %s: expected integer argument\n", 
+		       progname, bp);
+	      exit(1);
+	    }
+	}
+#if 1				/* FIXME: this option has been depricated */
+      else if (strnicmp(*argv, "NODE=", 5) == 0)
+	{
+	  bp = *argv + 5;
+	  board = strtol (bp, &ep, 0);
+	  if (ep == bp || *ep != '\0') 
+	    {
+	      fprintf (stderr, "%s: %s: expected integer argument\n", 
+		       progname, bp);
+	      exit(1);
+	    }
+	}
+#endif
+      else if (strnicmp(*argv, "PORT=", 5) == 0)
+	{
+	  bp = *argv + 5;
+	  port = strtol (bp, &ep, 0);
+	  if (ep == bp || *ep != '\0')
+	    {
+	      fprintf (stderr, "%s: %s: expected integer argument\n", 
+		       progname, bp);
+	      exit(1);
+	    }
+	}
+      else
+	{
+	  break;
+	}
+
+      cmdindx++;
+    }
+
+  if (argc == 0)
+    {
+      fprintf (stderr,
+	       "Usage: load %s [options] program [arguments]\n", progname);
+      exit (1);
+    }
+
+  err = AIOAcquirePort (&hardware, &board, &port, &AIOhandle);
+  if (err != AIO_SUCCESS)
+    {
+      switch (err)
+	{
+	case AIO_PORT_NOT_AVAILABLE:
+	  fprintf (stderr, "Port not available\n");
+	  break;
+
+	case AIO_BOARD_NUMBER_INVALID:
+	case AIO_PORT_NUMBER_INVALID:
+	  fprintf (stderr, "No such port\n");
+	  break;
+
+	default:
+	  fprintf (stderr, "Could not open port: %d\n", err);
+	  break;
+	}
+
+      exit (1);
+    }
+
+  err = AIOConfigurePort (AIOhandle, bitRate, dataBits, stopBits, parityMode,
+			  AIO_HARDWARE_FLOW_CONTROL_OFF);
+
+  if (err == AIO_QUALIFIED_SUCCESS)
+    {
+      AIOPORTCONFIG portConfig;
+
+      fprintf (stderr, "Port configuration changed!\n");
+
+      portConfig.returnLength = sizeof(portConfig);
+      AIOGetPortConfiguration (AIOhandle, &portConfig, NULL);
+
+      fprintf (stderr,
+	       "  Bit Rate: %s, Data Bits: %c, Stop Bits: %s, Parity: %c,\
+ Flow:%s\n",
+	       bitRateTable[portConfig.bitRate].bitRateString,
+	       dataBitsTable[portConfig.dataBits],
+	       stopBitsTable[portConfig.stopBits],
+	       parity[portConfig.parityMode],
+	       portConfig.flowCtrlMode ? "ON" : "OFF");
+    }
+  else if (err != AIO_SUCCESS)
+    {
+      fprintf (stderr, "Could not configure port: %d\n", err);
+      AIOReleasePort (AIOhandle);
+      exit (1);
+    }
+
+  if (AIOSetExternalControl(AIOhandle, AIO_EXTERNAL_CONTROL,
+			    (AIO_EXTCTRL_DTR | AIO_EXTCTRL_RTS))
+      != AIO_SUCCESS)
+    {
+      LONG extStatus, chgdExtStatus;
+
+      fprintf (stderr, "Could not set desired port controls!\n");
+      AIOGetExternalStatus (AIOhandle, &extStatus, &chgdExtStatus);
+      fprintf (stderr, "Port controls now: %d, %d\n", extStatus, 
+	       chgdExtStatus);
+    }
+
+  /* Register ourselves as an alternate debugger.  */
+  memset (&s, 0, sizeof s);
+  s.DDSResourceTag = ((struct ResourceTagStructure *)
+		      AllocateResourceTag (GetNLMHandle (),
+					   (BYTE *)"gdbserver",
+					   DebuggerSignature));
+  if (s.DDSResourceTag == 0)
+    {
+      fprintf (stderr, "AllocateResourceTag failed\n");
+      AIOReleasePort (AIOhandle);
+      exit (1);
+    }
+  s.DDSdebuggerEntry = handle_exception;
+  s.DDSFlags = TSS_FRAME_BIT;
+
+  err = RegisterDebuggerRTag (&s, AT_FIRST);
+  if (err != 0)
+    {
+      fprintf (stderr, "RegisterDebuggerRTag failed\n");
+      AIOReleasePort (AIOhandle);
+      exit (1);
+    }
+
+  /* Get the command line we were invoked with, and advance it past
+     our name and the board and port arguments.  */
+  cmdlin = getcmd ((char *) NULL);
+  for (i = 0; i < cmdindx; i++)
+    {
+      while (! isspace (*cmdlin))
+	++cmdlin;
+      while (isspace (*cmdlin))
+	++cmdlin;
+    }
+  
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+  if (! putDebugChar ('+'))
+    {
+      fprintf (stderr, "putDebugChar failed\n");
+      UnRegisterDebugger (&s);
+      AIOReleasePort (AIOhandle);
+      exit (1);
+    }
+
+  mainthread = GetThreadID ();
+
+  if (remote_debug > 0)
+    ConsolePrintf ("About to call LoadModule with \"%s\" %08x\r\n",
+		   cmdlin, __GetScreenID (GetCurrentScreen()));
+
+  /* Start up the module to be debugged.  */
+  err = LoadModule ((struct ScreenStruct *) __GetScreenID (GetCurrentScreen()),
+		    (BYTE *)cmdlin, LO_DEBUG);
+  if (err != 0)
+    {
+      fprintf (stderr, "LoadModule failed: %d\n", err);
+      UnRegisterDebugger (&s);
+      AIOReleasePort (AIOhandle);
+      exit (1);
+    }
+
+  /* Wait for the debugger to wake us up.  */
+  if (remote_debug > 0)
+    ConsolePrintf ("Suspending main thread (%08x)\r\n", mainthread);
+  SuspendThread (mainthread);
+  if (remote_debug > 0)
+    ConsolePrintf ("Resuming main thread (%08x)\r\n", mainthread);
+
+  /* If we are woken up, print an optional error message, deregister
+     ourselves and exit.  */
+  if (error_message != NULL)
+    fprintf (stderr, "%s\n", error_message);
+  UnRegisterDebugger (&s);
+  AIOReleasePort (AIOhandle);
+  exit (0);
+}
diff --git a/gdb/nlm/gdbserve.def b/gdb/nlm/gdbserve.def
new file mode 100644
index 0000000..588028d
--- /dev/null
+++ b/gdb/nlm/gdbserve.def
@@ -0,0 +1,42 @@
+description "GDB debugger stub"
+version 1,2
+debug
+module clib
+screenname "System Console"
+input gdbserve.O
+output gdbserve.nlm
+start _Prelude
+exit _Stop
+import
+	AllocateResourceTag
+	ConsolePrintf
+	GetCurrentScreen
+	GetNLMHandle
+	GetThreadID
+	KillMe
+	LoadModule
+	ReadByteAltDebugger
+	RegisterDebuggerRTag
+	ResumeThread
+	SuspendThread
+	UnRegisterDebugger
+	WriteByteAltDebugger
+	_GetCLibNLMLibHandle
+	_NWRegisterNLMLibraryUser
+	_SetupArgv
+	_StartNLM
+	_TerminateNLM
+	__GetScreenID
+	__get_errno_ptr
+	exit
+	fprintf
+	getcmd
+	memcmp
+	memcpy
+	memset
+	sprintf
+	strcmp
+	strcpy
+	strlen
+	strnicmp
+	strtol
diff --git a/gdb/nlm/i386.c b/gdb/nlm/i386.c
new file mode 100644
index 0000000..560198e
--- /dev/null
+++ b/gdb/nlm/i386.c
@@ -0,0 +1,108 @@
+#include <dfs.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <time.h>
+#include <conio.h>
+#include <advanced.h>
+#include <debugapi.h>
+#include <process.h>
+#include <errno.h>
+#include "i386.h"
+
+extern char *mem2hex (void *mem, char *buf, int count, int may_fault);
+extern char *hex2mem (char *buf, void *mem, int count, int may_fault);
+extern int computeSignal (int exceptionVector);
+
+void
+flush_i_cache()
+{
+}
+
+/* Get the registers out of the frame information.  */
+
+void
+frame_to_registers (frame, regs)
+     struct StackFrame *frame;
+     char *regs;
+{
+  /* Copy EAX -> EDI */
+  mem2hex (&frame->ExceptionEAX, &regs[0 * 4 * 2], 4 * 8, 0);
+
+  /* Copy EIP & PS */
+  mem2hex (&frame->ExceptionPC, &regs[8 * 4 * 2], 4 * 2, 0);
+
+  /* Copy CS, SS, DS */
+  mem2hex (&frame->ExceptionCS, &regs[10 * 4 * 2], 4 * 3, 0);
+
+  /* Copy ES */
+  mem2hex (&frame->ExceptionES, &regs[13 * 4 * 2], 4 * 1, 0);
+
+  /* Copy FS & GS */
+  mem2hex (&frame->ExceptionFS, &regs[14 * 4 * 2], 4 * 2, 0);
+}
+
+/* Put the registers back into the frame information.  */
+
+void
+registers_to_frame (regs, frame)
+     char *regs;
+     struct StackFrame *frame;
+{
+  /* Copy EAX -> EDI */
+  hex2mem (&regs[0 * 4 * 2], &frame->ExceptionEAX, 4 * 8, 0);
+
+  /* Copy EIP & PS */
+  hex2mem (&regs[8 * 4 * 2], &frame->ExceptionPC, 4 * 2, 0);
+
+  /* Copy CS, SS, DS */
+  hex2mem (&regs[10 * 4 * 2], &frame->ExceptionCS, 4 * 3, 0);
+
+  /* Copy ES */
+  hex2mem (&regs[13 * 4 * 2], &frame->ExceptionES, 4 * 1, 0);
+
+  /* Copy FS & GS */
+  hex2mem (&regs[14 * 4 * 2], &frame->ExceptionFS, 4 * 2, 0);
+}
+
+void
+set_step_traps (frame)
+     struct StackFrame *frame;
+{
+  frame->ExceptionSystemFlags |= 0x100;
+}
+
+void
+clear_step_traps (frame)
+     struct StackFrame *frame;
+{
+  frame->ExceptionSystemFlags &= ~0x100;
+}
+
+void
+do_status (ptr, frame)
+     char *ptr;
+     struct StackFrame *frame;
+{
+  int sigval;
+
+  sigval = computeSignal (frame->ExceptionNumber);
+
+  sprintf (ptr, "T%02x", sigval);
+  ptr += 3;
+
+  sprintf (ptr, "%02x:", PC_REGNUM);
+  ptr = mem2hex (&frame->ExceptionPC, ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  sprintf (ptr, "%02x:", SP_REGNUM);
+  ptr = mem2hex (&frame->ExceptionESP, ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  sprintf (ptr, "%02x:", FP_REGNUM);
+  ptr = mem2hex (&frame->ExceptionEBP, ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  *ptr = '\000';
+}
diff --git a/gdb/nlm/i386.h b/gdb/nlm/i386.h
new file mode 100644
index 0000000..155702b
--- /dev/null
+++ b/gdb/nlm/i386.h
@@ -0,0 +1,13 @@
+/* Register values.  All of these values *MUST* agree with tm.h */
+#define SP_REGNUM 4		/* Contains address of top of stack */
+#define PC_REGNUM 8		/* Contains program counter */
+#define FP_REGNUM 5		/* Virtual frame pointer */
+#define NUM_REGS 16		/* Number of machine registers */
+#define REGISTER_BYTES (NUM_REGS * 4) /* Total size of registers array */
+
+#define ExceptionPC ExceptionEIP
+#define DECR_PC_AFTER_BREAK 1	/* int 3 leaves PC pointing after insn */
+#define BREAKPOINT {0xcc}
+#define BREAKPOINT_SIZE (sizeof breakpoint_insn)
+
+#define StackFrame T_TSS_StackFrame
diff --git a/gdb/nlm/ppc.c b/gdb/nlm/ppc.c
new file mode 100644
index 0000000..e68397b
--- /dev/null
+++ b/gdb/nlm/ppc.c
@@ -0,0 +1,257 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <errno.h>
+
+#include <nwtypes.h>
+#include <nwdfs.h>
+#include <nwconio.h>
+#include <nwadv.h>
+#include <nwdbgapi.h>
+#include <nwthread.h>
+#include "ppc.h"
+
+extern char *mem2hex (void *mem, char *buf, int count, int may_fault);
+extern char *hex2mem (char *buf, void *mem, int count, int may_fault);
+extern int computeSignal (int exceptionVector);
+
+void
+flush_i_cache (void)
+{
+}
+
+/* Get the registers out of the frame information.  */
+
+void
+frame_to_registers (frame, regs)
+     struct StackFrame *frame;
+     char *regs;
+{
+  mem2hex (&frame->ExceptionState.CsavedRegs, &regs[GP0_REGNUM * 4 * 2], 4 * 32, 0);
+
+  mem2hex (&frame->ExceptionState.CSavedFPRegs, &regs[FP0_REGNUM * 4 * 2], 4 * 32, 0);
+
+  mem2hex (&frame->ExceptionPC, &regs[PC_REGNUM * 4 * 2], 4 * 1, 0);
+
+  mem2hex (&frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedSRR1, &regs[CR_REGNUM * 4 * 2], 4 * 1, 0);
+  mem2hex (&frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedLR, &regs[LR_REGNUM * 4 * 2], 4 * 1, 0);
+  mem2hex (&frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedCTR, &regs[CTR_REGNUM * 4 * 2], 4 * 1, 0);
+  mem2hex (&frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedXER, &regs[XER_REGNUM * 4 * 2], 4 * 1, 0);
+  mem2hex (&frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedMQ, &regs[MQ_REGNUM * 4 * 2], 4 * 1, 0);
+}
+
+/* Put the registers back into the frame information.  */
+
+void
+registers_to_frame (regs, frame)
+     char *regs;
+     struct StackFrame *frame;
+{
+  hex2mem (&regs[GP0_REGNUM * 4 * 2], &frame->ExceptionState.CsavedRegs, 4 * 32, 0);
+
+  hex2mem (&regs[FP0_REGNUM * 4 * 2], &frame->ExceptionState.CSavedFPRegs, 4 * 32, 0);
+
+  hex2mem (&regs[PC_REGNUM * 4 * 2], &frame->ExceptionPC, 4 * 1, 0);
+
+  hex2mem (&regs[CR_REGNUM * 4 * 2], &frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedSRR1, 4 * 1, 0);
+  hex2mem (&regs[LR_REGNUM * 4 * 2], &frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedLR, 4 * 1, 0);
+  hex2mem (&regs[CTR_REGNUM * 4 * 2], &frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedCTR, 4 * 1, 0);
+  hex2mem (&regs[XER_REGNUM * 4 * 2], &frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedXER, 4 * 1, 0);
+  hex2mem (&regs[MQ_REGNUM * 4 * 2], &frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedMQ, 4 * 1, 0);
+}
+
+
+extern volatile int mem_err;
+
+#ifdef ALTERNATE_MEM_FUNCS
+extern int ReadByteAltDebugger (char* addr, char *theByte);
+extern int WriteByteAltDebugger (char* addr, char theByte);
+int
+get_char (addr)
+     char *addr;
+{
+  char c;
+
+  if (!ReadByteAltDebugger (addr, &c))
+    mem_err = 1;
+
+  return c;
+}
+
+void
+set_char (addr, val)
+     char *addr;
+     int val;
+{
+  if (!WriteByteAltDebugger (addr, val))
+    mem_err = 1;
+}
+#endif
+
+int
+mem_write (dst, src, len)
+     char *dst, *src;
+     int len;
+{
+  while (len-- && !mem_err)
+    set_char (dst++, *src++);
+
+  return mem_err;
+}
+
+union inst
+{
+  LONG l;
+
+  struct
+    {
+      union
+	{
+	  struct		/* Unconditional branch */
+	    {
+	      unsigned opcode : 6; /* 18 */
+	      signed li : 24;
+	      unsigned aa : 1;
+	      unsigned lk : 1;
+	    } b;
+	  struct		/* Conditional branch */
+	    {
+	      unsigned opcode : 6; /* 16 */
+	      unsigned bo : 5;
+	      unsigned bi : 5;
+	      signed bd : 14;
+	      unsigned aa : 1;
+	      unsigned lk : 1;
+	    } bc;
+	  struct		/* Conditional branch to ctr or lr reg */
+	    {
+	      unsigned opcode : 6; /* 19 */
+	      unsigned bo : 5;
+	      unsigned bi : 5;
+	      unsigned type : 15; /* 528 = ctr, 16 = lr */
+	      unsigned lk : 1;
+	    } bclr;
+	} variant;
+    } inst;
+};
+
+static LONG saved_inst;
+static LONG *saved_inst_pc = 0;
+static LONG saved_target_inst;
+static LONG *saved_target_inst_pc = 0;
+
+void
+set_step_traps (frame)
+     struct StackFrame *frame;
+{
+  union inst inst;
+  LONG *target;
+  int opcode;
+  int ra, rb;
+  LONG *pc = (LONG *)frame->ExceptionPC;
+
+  inst.l = *pc++;
+
+  opcode = inst.inst.variant.b.opcode;
+
+  target = pc;
+
+  switch (opcode)
+    {
+    case 18:			/* Unconditional branch */
+
+      if (inst.inst.variant.b.aa) /* Absolute? */
+	target = 0;
+      target += inst.inst.variant.b.li;
+
+      break;
+    case 16:			/* Conditional branch */
+
+      if (!inst.inst.variant.bc.aa) /* Absolute? */
+	target = 0;
+      target += inst.inst.variant.bc.bd;
+
+      break;
+    case 19:			/* Cond. branch via ctr or lr reg */
+      switch (inst.inst.variant.bclr.type)
+	{
+	case 528:		/* ctr */
+	  target = (LONG *)frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedCTR;
+	  break;
+	case 16:		/* lr */
+	  target = (LONG *)frame->ExceptionState.u.SpecialRegistersEnumerated.CsavedLR;
+	  break;
+	}
+      break;
+    }
+
+  saved_inst = *pc;
+  mem_write (pc, breakpoint_insn, BREAKPOINT_SIZE);
+  saved_inst_pc = pc;
+
+  if (target != pc)
+    {
+      saved_target_inst = *target;
+      mem_write (target, breakpoint_insn, BREAKPOINT_SIZE);
+      saved_target_inst_pc = target;
+    }
+}
+
+/* Remove step breakpoints.  Returns non-zero if pc was at a step breakpoint,
+   zero otherwise.  This routine works even if there were no step breakpoints
+   set.  */
+
+int
+clear_step_traps (frame)
+     struct StackFrame *frame;
+{
+  int retcode;
+  LONG *pc = (LONG *)frame->ExceptionPC;
+
+  if (saved_inst_pc == pc || saved_target_inst_pc == pc)
+    retcode = 1;
+  else
+    retcode = 0;
+
+  if (saved_inst_pc)
+    {
+      mem_write (saved_inst_pc, saved_inst, BREAKPOINT_SIZE);
+      saved_inst_pc = 0;
+    }
+
+  if (saved_target_inst_pc)
+    {
+      mem_write (saved_target_inst_pc, saved_target_inst, BREAKPOINT_SIZE);
+      saved_target_inst_pc = 0;
+    }
+
+  return retcode;
+}
+
+void
+do_status (ptr, frame)
+     char *ptr;
+     struct StackFrame *frame;
+{
+  int sigval;
+
+  sigval = computeSignal (frame->ExceptionNumber);
+
+  sprintf (ptr, "T%02x", sigval);
+  ptr += 3;
+
+  sprintf (ptr, "%02x:", PC_REGNUM);
+  ptr = mem2hex (&frame->ExceptionPC, ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  sprintf (ptr, "%02x:", SP_REGNUM);
+  ptr = mem2hex (&frame->ExceptionState.CsavedRegs[SP_REGNUM], ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  sprintf (ptr, "%02x:", LR_REGNUM);
+  ptr = mem2hex (&frame->ExceptionState.CsavedRegs[LR_REGNUM], ptr + 3, 4, 0);
+  *ptr++ = ';';
+
+  *ptr = '\000';
+}
diff --git a/gdb/nlm/ppc.h b/gdb/nlm/ppc.h
new file mode 100644
index 0000000..84cee6b
--- /dev/null
+++ b/gdb/nlm/ppc.h
@@ -0,0 +1,165 @@
+typedef long Long;
+
+/* The following enum is used to access the special registers in 
+   the saved machine state.  */
+
+typedef enum
+{
+  kDc_SavedPC =	0,		/* really SRR0 */
+  kDc_SavedMSR = 1,		/* really SRR1 */
+  kDc_SavedCR =	2,
+  kDc_SavedLR =	3,
+  kDc_SavedDSISR = 4,
+  kDc_SavedDAR = 5,
+  kDc_SavedXER = 6,
+  kDc_SavedCTR = 7,
+  kDc_SavedSDR1 = 8,
+  kDc_SavedRTCU = 9,
+  kDc_SavedRTCL = 10,
+  kDc_SavedDEC = 11,
+  kDc_SavedSR00 = 12,		/* The Segement Registers are consecutive */
+  kDc_SavedSR01 = 13,		/* kDc_SavedSR00 + n is supported */
+  kDc_SavedSR02 = 14,
+  kDc_SavedSR03 = 15,
+  kDc_SavedSR04 = 16,
+  kDc_SavedSR05 = 17,
+  kDc_SavedSR06 = 18,
+  kDc_SavedSR07 = 19,
+  kDc_SavedSR08 = 20,
+  kDc_SavedSR09 = 21,
+  kDc_SavedSR10 = 22,
+  kDc_SavedSR11 = 23,
+  kDc_SavedSR12 = 24,
+  kDc_SavedSR13 = 25,
+  kDc_SavedSR14 = 26,
+  kDc_SavedSR15 = 27,
+  kDc_SavedFPSCR = 29,
+  kDc_SavedMQ = 30,
+  kDc_SavedBAT0U = 31,
+  kDc_SavedBAT0L = 32,
+  kDc_SavedBAT1U = 33,
+  kDc_SavedBAT1L = 34,
+  kDc_SavedBAT2U = 35,
+  kDc_SavedBAT2L = 36,
+  kDc_SavedBAT3U = 37,
+  kDc_SavedBAT3L = 38,
+
+  kNumberSpecialRegisters = 39
+} Dc_SavedRegisterName;
+
+/* Access to floating points is not very easy.  This allows the number to be
+   accessed both as a floating number and as a pair of Longs.  */
+
+typedef union
+{
+  double asfloat;		/* access the variable as a floating number */
+  struct
+    {
+      Long high;
+      Long low;
+    }
+  asLONG;			/* access the variable as two Longs */
+} FloatingPoints;
+
+/* The following is the standard record for Saving a machine state */
+
+struct SavedMachineState
+{
+  FloatingPoints CSavedFPRegs[32]; /* The floating point registers [0->31] */
+				/* ***32bit assumption*** */
+  Long CsavedRegs[32];		/* space to save the General Registers */
+				/* These are saved 0->31 */
+  Long CexReason;
+  Long SavedDomainID;
+  union
+    {				/* must be 8-byte aligned, so doubleFPSCR is 8-byte aligned */
+      struct
+	{
+	  Long CsavedSRR0;	/* Index 0 - The saved PC */
+	  Long CsavedSRR1;	/* 1 saved MSR */
+	  Long CsavedCR;	/* 2 */
+	  Long CsavedLR;	/* 3 */
+	  Long CsavedDSISR;	/* 4 */
+	  Long CsavedDAR;	/* 5 */
+
+	  Long CsavedXER;	/* 6 */
+	  Long CsavedCTR;	/* 7 */
+	  Long CsavedSDR1;	/* 8 */
+	  Long CsavedRTCU;	/* 9 */
+	  Long CsavedRTCL;	/* 10 */
+	  Long CsavedDEC;	/* 11 */
+	  Long CsavedSR0;	/* 12 */
+	  Long CsavedSR1;	/* 13 */
+	  Long CsavedSR2;	/* 14 */
+	  Long CsavedSR3;	/* 15 */
+	  Long CsavedSR4;	/* 16 */
+	  Long CsavedSR5;	/* 17 */
+	  Long CsavedSR6;	/* 18 */
+	  Long CsavedSR7;	/* 19 */
+	  Long CsavedSR8;	/* 20 */
+	  Long CsavedSR9;	/* 21 */
+	  Long CsavedSR10;	/* 22 */
+	  Long CsavedSR11;	/* 23 */
+	  Long CsavedSR12;	/* 24 */
+	  Long CsavedSR13;	/* 25 */
+	  Long CsavedSR14;	/* 26 */
+	  Long CsavedSR15;	/* 27 */
+				/* CdoubleFPSCR must be double word aligned */
+	  Long CdoubleFPSCR;	/* 28 this is the upper part of the store and has
+				      no meaning */
+	  Long CsavedFPSCR;	/* 29 */
+	  Long CsavedMQ;	/* 30 */
+	  Long CsavedBAT0U;	/* 31 */
+	  Long CsavedBAT0L;	/* 32 */
+	  Long CsavedBAT1U;	/* 33 */
+	  Long CsavedBAT1L;	/* 34 */
+	  Long CsavedBAT2U;	/* 35 */
+	  Long CsavedBAT2L;	/* 36 */
+	  Long CsavedBAT3U;	/* 37 */
+	  Long CsavedBAT3L;	/* 38 */
+	}
+      SpecialRegistersEnumerated;
+
+      Long SpecialRegistersIndexed[kNumberSpecialRegisters];
+    } u;
+
+  Long Padding[3];		/* Needed for quad-word alignment */
+};
+
+struct StackFrame
+{
+  LONG *ExceptionDomainID;
+  /*ProcessorStructure*/ int *ExceptionProcessorID;
+  BYTE *ExceptionDescription;
+  LONG ExceptionFlags;
+  LONG ExceptionErrorCode;
+  LONG ExceptionNumber;
+  struct SavedMachineState ExceptionState;
+};
+
+/* Register values.  All of these values *MUST* agree with tm.h */
+#define	GP0_REGNUM 0		/* GPR register 0 */
+#define SP_REGNUM 1		/* Contains address of top of stack */
+#define FP0_REGNUM 32		/* FPR (Floating point) register 0 */
+#define PC_REGNUM 64		/* Contains program counter */
+#define PS_REGNUM 65		/* Processor (or machine) status (%msr) */
+#define	CR_REGNUM 66		/* Condition register */
+#define	LR_REGNUM 67		/* Link register */
+#define	CTR_REGNUM 68		/* Count register */
+#define	XER_REGNUM 69		/* Fixed point exception registers */
+#define	MQ_REGNUM 70		/* Multiply/quotient register */
+#define NUM_REGS 71		/* Number of machine registers */
+#define REGISTER_BYTES (420)	/* Total size of registers array */
+
+#define ExceptionPC ExceptionState.u.SpecialRegistersEnumerated.CsavedSRR0
+#define DECR_PC_AFTER_BREAK 0	/* PPCs get this right! */
+#define BREAKPOINT {0x7d, 0x82, 0x10, 0x08}
+extern unsigned char breakpoint_insn[];
+#define BREAKPOINT_SIZE 4
+
+#if 0
+#define ALTERNATE_MEM_FUNCS	/* We need our own get_char/set_char */
+#endif
+
+extern int get_char (char *addr);
+extern void set_char (char *addr, int val);
diff --git a/gdb/nlm/prelude.c b/gdb/nlm/prelude.c
new file mode 100644
index 0000000..37e12c8
--- /dev/null
+++ b/gdb/nlm/prelude.c
@@ -0,0 +1,67 @@
+/*===========================================================================
+=	Novell Standard C Library for NetWare Loadable Modules
+=
+=	Unpublished Copyright (C) 1993 by Novell, Inc. All rights reserved.
+=
+=	No part of this file may be duplicated, revised, translated, localized or
+=	modified in any manner or compiled, linked or uploaded or downloaded to or
+=	from any computer system without the prior written consent of Novell, Inc.
+==============================================================================
+=	The object produced by compiling this file is for use by the client of this
+=	library and is not linked in;  Prelude.Obj is therefore one of the files to
+=	be distributed with CLib.NLM and its headers.
+==============================================================================
+*/
+
+#include <stddef.h>
+#if defined(__netware__) && defined(__i386__)
+#define TERMINATE_BY_UNLOAD	5
+#else
+#include <nwpre.h>
+#endif
+/*#include "libhooks.h"*/
+
+extern int main (int, char **);
+
+static int	NLMID;
+
+
+void _Stop( void )
+{
+	_TerminateNLM(NLMID, NULL, TERMINATE_BY_UNLOAD);
+}
+
+int _cstart_( void )
+{
+   return _SetupArgv(main);
+}
+
+int _Prelude
+(
+	int	NLMHandle,
+	int	initErrorScreenID,
+	char	*commandLine,
+	char	*loadDirectoryPath,
+	int	uninitializedDataLength,
+	int	NLMFileHandle,
+	int	(*readRoutineP)(),
+	int	customDataOffset,
+	int	customDataSize
+)
+{
+	int	rc;
+
+   rc = _StartNLM(NLMHandle,
+					initErrorScreenID,
+					commandLine,
+					loadDirectoryPath,
+					uninitializedDataLength,
+					NLMFileHandle,
+					readRoutineP,
+					customDataOffset,
+					customDataSize,
+               &NLMID,
+					_cstart_);
+
+	return rc;
+}
diff --git a/gdb/nlmread.c b/gdb/nlmread.c
new file mode 100644
index 0000000..afdea43
--- /dev/null
+++ b/gdb/nlmread.c
@@ -0,0 +1,261 @@
+/* Read NLM (NetWare Loadable Module) format executable files for GDB.
+   Copyright 1993, 1994, 1998 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support (fnf@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "bfd.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "buildsym.h"
+#include "stabsread.h"
+
+static void
+nlm_new_init PARAMS ((struct objfile *));
+
+static void
+nlm_symfile_init PARAMS ((struct objfile *));
+
+static void
+nlm_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+nlm_symfile_finish PARAMS ((struct objfile *));
+
+static void
+nlm_symtab_read PARAMS ((bfd *,  CORE_ADDR, struct objfile *));
+
+/* Initialize anything that needs initializing when a completely new symbol
+   file is specified (not just adding some symbols from another file, e.g. a
+   shared library).
+
+   We reinitialize buildsym, since gdb will be able to read stabs from an NLM
+   file at some point in the near future.  */
+
+static void
+nlm_new_init (ignore)
+     struct objfile *ignore;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+}
+
+
+/* NLM specific initialization routine for reading symbols.
+
+   It is passed a pointer to a struct sym_fns which contains, among other
+   things, the BFD for the file whose symbols are being read, and a slot for
+   a pointer to "private data" which we can fill with goodies.
+
+   For now at least, we have nothing in particular to do, so this function is
+   just a stub. */
+
+static void
+nlm_symfile_init (ignore)
+     struct objfile *ignore;
+{
+}
+
+/*
+
+LOCAL FUNCTION
+
+	nlm_symtab_read -- read the symbol table of an NLM file
+
+SYNOPSIS
+
+	void nlm_symtab_read (bfd *abfd, CORE_ADDR addr,
+			      struct objfile *objfile)
+
+DESCRIPTION
+
+	Given an open bfd, a base address to relocate symbols to, and a
+	flag that specifies whether or not this bfd is for an executable
+	or not (may be shared library for example), add all the global
+	function and data symbols to the minimal symbol table.
+*/
+
+static void
+nlm_symtab_read (abfd, addr, objfile)
+     bfd *abfd;
+     CORE_ADDR addr;
+     struct objfile *objfile;
+{
+  long storage_needed;
+  asymbol *sym;
+  asymbol **symbol_table;
+  long number_of_symbols;
+  long i;
+  struct cleanup *back_to;
+  CORE_ADDR symaddr;
+  enum minimal_symbol_type ms_type;
+  
+  storage_needed = bfd_get_symtab_upper_bound (abfd);
+  if (storage_needed < 0)
+    error ("Can't read symbols from %s: %s", bfd_get_filename (abfd),
+	   bfd_errmsg (bfd_get_error ()));
+  if (storage_needed > 0)
+    {
+      symbol_table = (asymbol **) xmalloc (storage_needed);
+      back_to = make_cleanup (free, symbol_table);
+      number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table); 
+      if (number_of_symbols < 0)
+	error ("Can't read symbols from %s: %s", bfd_get_filename (abfd),
+	       bfd_errmsg (bfd_get_error ()));
+  
+      for (i = 0; i < number_of_symbols; i++)
+	{
+	  sym = symbol_table[i];
+	  if (/*sym -> flags & BSF_GLOBAL*/ 1)
+	    {
+	      /* Bfd symbols are section relative. */
+	      symaddr = sym -> value + sym -> section -> vma;
+	      /* Relocate all non-absolute symbols by base address.  */
+	      if (sym -> section != &bfd_abs_section)
+		symaddr += addr;
+
+	      /* For non-absolute symbols, use the type of the section
+		 they are relative to, to intuit text/data.  BFD provides
+		 no way of figuring this out for absolute symbols. */
+	      if (sym -> section -> flags & SEC_CODE)
+		ms_type = mst_text;
+	      else if (sym -> section -> flags & SEC_DATA)
+		ms_type = mst_data;
+	      else
+		ms_type = mst_unknown;
+
+	      prim_record_minimal_symbol (sym -> name, symaddr, ms_type,
+					  objfile);
+	    }
+	}
+      do_cleanups (back_to);
+    }
+}
+
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to nlm_symfile_init, which 
+   currently does nothing.
+
+   SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
+   in each section.  We simplify it down to a single offset for all
+   symbols.  FIXME.
+
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).
+
+   This function only does the minimum work necessary for letting the
+   user "name" things symbolically; it does not read the entire symtab.
+   Instead, it reads the external and static symbols and puts them in partial
+   symbol tables.  When more extensive information is requested of a
+   file, the corresponding partial symbol table is mutated into a full
+   fledged symbol table by going back and reading the symbols
+   for real.
+
+   Note that NLM files have two sets of information that is potentially
+   useful for building gdb's minimal symbol table.  The first is a list
+   of the publically exported symbols, and is currently used to build
+   bfd's canonical symbol table.  The second is an optional native debugging
+   format which contains additional symbols (and possibly duplicates of
+   the publically exported symbols).  The optional native debugging format
+   is not currently used. */
+
+static void
+nlm_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile -> obfd;
+  struct cleanup *back_to;
+  CORE_ADDR offset;
+  struct symbol *mainsym;
+
+  init_minimal_symbol_collection ();
+  back_to = make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* FIXME, should take a section_offsets param, not just an offset.  */
+
+  offset = ANOFFSET (section_offsets, 0);
+
+  /* Process the NLM export records, which become the bfd's canonical symbol
+     table. */
+
+  nlm_symtab_read (abfd, offset, objfile);
+
+  stabsect_build_psymtabs (objfile, section_offsets, mainline, ".stab",
+			   ".stabstr", ".text");
+
+  mainsym = lookup_symbol ("main", NULL, VAR_NAMESPACE, NULL, NULL);
+
+  if (mainsym
+      && SYMBOL_CLASS(mainsym) == LOC_BLOCK)
+    {
+      objfile->ei.main_func_lowpc = BLOCK_START (SYMBOL_BLOCK_VALUE (mainsym));
+      objfile->ei.main_func_highpc = BLOCK_END (SYMBOL_BLOCK_VALUE (mainsym));
+    }
+
+  /* FIXME:  We could locate and read the optional native debugging format
+     here and add the symbols to the minimal symbol table. */
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+
+  do_cleanups (back_to);
+}
+
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+nlm_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile -> sym_private != NULL)
+    {
+      mfree (objfile -> md, objfile -> sym_private);
+    }
+}
+
+/* Register that we are able to handle NLM file format. */
+
+static struct sym_fns nlm_sym_fns =
+{
+  bfd_target_nlm_flavour,
+  nlm_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  nlm_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  nlm_symfile_read,	/* sym_read: read a symbol file into symtab */
+  nlm_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,
+			/* sym_offsets:  Translate ext. to int. relocation */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_nlmread ()
+{
+  add_symtab_fns (&nlm_sym_fns);
+}
diff --git a/gdb/notify.defs b/gdb/notify.defs
new file mode 100644
index 0000000..2014be5
--- /dev/null
+++ b/gdb/notify.defs
@@ -0,0 +1 @@
+#include <mach/notify.defs>
diff --git a/gdb/ns32k-tdep.c b/gdb/ns32k-tdep.c
new file mode 100644
index 0000000..3edb7f5
--- /dev/null
+++ b/gdb/ns32k-tdep.c
@@ -0,0 +1,122 @@
+/* Print NS 32000 instructions for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1991, 1992, 1994, 1995
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+void
+_initialize_ns32k_tdep ()
+{
+  tm_print_insn = print_insn_ns32k;
+}
+
+sign_extend (value, bits)
+{
+  value = value & ((1 << bits) - 1);
+  return (value & (1 << (bits-1))
+	  ? value | (~((1 << bits) - 1))
+	  : value);
+}
+
+void
+flip_bytes (ptr, count)
+     char *ptr;
+     int count;
+{
+  char tmp;
+
+  while (count > 0)
+    {
+      tmp = *ptr;
+      ptr[0] = ptr[count-1];
+      ptr[count-1] = tmp;
+      ptr++;
+      count -= 2;
+    }
+}
+
+/* Return the number of locals in the current frame given a pc
+   pointing to the enter instruction.  This is used in the macro
+   FRAME_FIND_SAVED_REGS.  */
+
+int
+ns32k_localcount (enter_pc)
+     CORE_ADDR enter_pc;
+{
+  unsigned char localtype;
+  int localcount;
+
+  localtype = read_memory_integer (enter_pc+2, 1);
+  if ((localtype & 0x80) == 0)
+    localcount = localtype;
+  else if ((localtype & 0xc0) == 0x80)
+    localcount = (((localtype & 0x3f) << 8)
+		  | (read_memory_integer (enter_pc+3, 1) & 0xff));
+  else
+    localcount = (((localtype & 0x3f) << 24)
+		  | ((read_memory_integer (enter_pc+3, 1) & 0xff) << 16)
+		  | ((read_memory_integer (enter_pc+4, 1) & 0xff) << 8 )
+		  | (read_memory_integer (enter_pc+5, 1) & 0xff));
+  return localcount;
+}
+
+
+/* Nonzero if instruction at PC is a return instruction.  */
+
+static int
+ns32k_about_to_return (pc)
+     CORE_ADDR pc;
+{
+  return (read_memory_integer (pc, 1) == 0x12);
+}
+
+
+/*
+ * Get the address of the enter opcode for the function
+ * containing PC, if there is an enter for the function,
+ * and if the pc is between the enter and exit.
+ * Returns positive address if pc is between enter/exit,
+ * 1 if pc before enter or after exit, 0 otherwise.
+ */
+
+CORE_ADDR
+ns32k_get_enter_addr (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR enter_addr;
+  unsigned char op;
+
+  if (pc == 0)
+    return 0;
+
+  if (ns32k_about_to_return (pc))
+    return 1;		/* after exit */
+
+  enter_addr = get_pc_function_start (pc);
+
+  if (pc == enter_addr) 
+    return 1;		/* before enter */
+
+  op = read_memory_integer (enter_addr, 1);
+
+  if (op != 0x82)
+    return 0;		/* function has no enter/exit */
+
+  return enter_addr;	/* pc is between enter and exit */
+}
diff --git a/gdb/ns32km3-nat.c b/gdb/ns32km3-nat.c
new file mode 100644
index 0000000..cdafb9c
--- /dev/null
+++ b/gdb/ns32km3-nat.c
@@ -0,0 +1,183 @@
+/* Low level interface to ns532 running mach 3.0.
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+
+#include <stdio.h>
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach/exception.h>
+#include <mach_error.h>
+
+#define private static
+
+
+/* Find offsets to thread states at compile time.
+ * If your compiler does not grok this, calculate offsets
+ * offsets yourself and use them (or get a compatible compiler :-)
+ */
+
+#define  REG_N_OFFSET(reg) (int)(&((struct ns532_combined_state *)0)->ts.reg)
+#define  REG_F_OFFSET(reg) (int)(&((struct ns532_combined_state *)0)->fs.reg)
+
+/* at reg_offset[i] is the offset to the ns532_combined_state
+ * location where the gdb registers[i] is stored.
+ */
+
+static int reg_offset[] = 
+{
+  REG_N_OFFSET(r0),  REG_N_OFFSET(r1), REG_N_OFFSET(r2), REG_N_OFFSET(r3),
+  REG_N_OFFSET(r4),  REG_N_OFFSET(r5), REG_N_OFFSET(r6), REG_N_OFFSET(r7),
+  REG_F_OFFSET(l0a), REG_F_OFFSET(l0b),REG_F_OFFSET(l2a),REG_F_OFFSET(l2b),
+  REG_F_OFFSET(l4a), REG_F_OFFSET(l4b),REG_F_OFFSET(l6a),REG_F_OFFSET(l6b),
+  REG_N_OFFSET(sp),  REG_N_OFFSET(fp), REG_N_OFFSET(pc), REG_N_OFFSET(psr),
+  REG_F_OFFSET(fsr),
+  REG_F_OFFSET(l0a), REG_F_OFFSET(l1a),REG_F_OFFSET(l2a),REG_F_OFFSET(l3a),
+  REG_F_OFFSET(l4a), REG_F_OFFSET(l5a),REG_F_OFFSET(l6a),REG_F_OFFSET(l7a),
+};
+
+#define REG_ADDRESS(state,regnum) ((char *)(state)+reg_offset[regnum])
+
+/* Fetch COUNT contiguous registers from thread STATE starting from REGNUM
+ * Caller knows that the regs handled in one transaction are of same size.
+ */
+#define FETCH_REGS(state, regnum, count) \
+  memcpy (&registers[REGISTER_BYTE (regnum)], \
+	  (char *)state+reg_offset[ regnum ], \
+	  count*REGISTER_SIZE)
+
+/* Store COUNT contiguous registers to thread STATE starting from REGNUM */
+#define STORE_REGS(state, regnum, count) \
+  memcpy ((char *)state+reg_offset[ regnum ], \
+	  &registers[REGISTER_BYTE (regnum)], \
+	  count*REGISTER_SIZE)
+
+/*
+ * Fetch inferiors registers for gdb.
+ * REGNO specifies which (as gdb views it) register, -1 for all.
+ */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = NS532_COMBINED_STATE_COUNT;
+  int index;
+  
+  if (! MACH_PORT_VALID (current_thread))
+    error ("fetch inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  ret = thread_get_state (current_thread,
+			  NS532_COMBINED_STATE,
+			  state,
+			  &stateCnt);
+
+  if (ret != KERN_SUCCESS)
+    warning ("fetch_inferior_registers: %s ",
+	     mach_error_string (ret));
+#if 0
+  /* It may be more effective to store validate all of them,
+   * since we fetched them all anyway
+   */
+  else if (regno != -1)
+    supply_register (regno, (char *)state+reg_offset[regno]);
+#endif
+  else
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	supply_register (index, (char *)state+reg_offset[index]);
+    }
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
+
+/* Store our register values back into the inferior.
+ * If REGNO is -1, do this for all registers.
+ * Otherwise, REGNO specifies which register
+ *
+ * On mach3 all registers are always saved in one call.
+ */
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  kern_return_t ret;
+  thread_state_data_t state;
+  unsigned int stateCnt = NS532_COMBINED_STATE_COUNT;
+  register int index;
+
+  if (! MACH_PORT_VALID (current_thread))
+    error ("store inferior registers: Invalid thread");
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 1);
+
+  /* Fetch the state of the current thread */
+  ret = thread_get_state (current_thread,
+			  NS532_COMBINED_STATE,
+			  state,
+			  &stateCnt);
+
+   if (ret != KERN_SUCCESS) 
+    {
+      warning ("store_inferior_registers (get): %s",
+	       mach_error_string (ret));
+      if (must_suspend_thread)
+	setup_thread (current_thread, 0);
+      return;
+    }
+
+  /* move gdb's registers to thread's state
+   *
+   * Since we save all registers anyway, save the ones
+   * that gdb thinks are valid (e.g. ignore the regno
+   * parameter)
+   */
+#if 0
+  if (regno != -1)
+    STORE_REGS (state, regno, 1);
+  else
+#endif
+    {
+      for (index = 0; index < NUM_REGS; index++) 
+	STORE_REGS (state, index, 1);
+    }
+  
+  /* Write gdb's current view of register to the thread
+   */
+  ret = thread_set_state (current_thread,
+			  NS532_COMBINED_STATE,
+			  state,
+			  NS532_COMBINED_STATE_COUNT);
+  
+  if (ret != KERN_SUCCESS)
+    warning ("store_inferior_registers (set): %s",
+	     mach_error_string (ret));
+
+  if (must_suspend_thread)
+    setup_thread (current_thread, 0);
+}
diff --git a/gdb/ns32knbsd-nat.c b/gdb/ns32knbsd-nat.c
new file mode 100644
index 0000000..c9f75ca
--- /dev/null
+++ b/gdb/ns32knbsd-nat.c
@@ -0,0 +1,353 @@
+/* Functions specific to running gdb native on an ns32k running NetBSD
+   Copyright 1989, 1992, 1993, 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <sys/types.h>
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+#include <machine/frame.h>
+#include <machine/pcb.h>
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+
+#define RF(dst, src) \
+	memcpy(&registers[REGISTER_BYTE(dst)], &src, sizeof(src))
+
+#define RS(src, dst) \
+	memcpy(&dst, &registers[REGISTER_BYTE(src)], sizeof(dst))
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  struct reg inferior_registers;
+  struct fpreg inferior_fpregisters;
+
+  ptrace (PT_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+  ptrace (PT_GETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fpregisters, 0);
+
+  RF(R0_REGNUM + 0, inferior_registers.r_r0);
+  RF(R0_REGNUM + 1, inferior_registers.r_r1);
+  RF(R0_REGNUM + 2, inferior_registers.r_r2);
+  RF(R0_REGNUM + 3, inferior_registers.r_r3);
+  RF(R0_REGNUM + 4, inferior_registers.r_r4);
+  RF(R0_REGNUM + 5, inferior_registers.r_r5);
+  RF(R0_REGNUM + 6, inferior_registers.r_r6);
+  RF(R0_REGNUM + 7, inferior_registers.r_r7);
+
+  RF(SP_REGNUM	  , inferior_registers.r_sp);
+  RF(FP_REGNUM	  , inferior_registers.r_fp);
+  RF(PC_REGNUM	  , inferior_registers.r_pc);
+  RF(PS_REGNUM	  , inferior_registers.r_psr);
+
+  RF(FPS_REGNUM   , inferior_fpregisters.r_fsr);
+  RF(FP0_REGNUM +0, inferior_fpregisters.r_freg[0]);
+  RF(FP0_REGNUM +2, inferior_fpregisters.r_freg[2]);
+  RF(FP0_REGNUM +4, inferior_fpregisters.r_freg[4]);
+  RF(FP0_REGNUM +6, inferior_fpregisters.r_freg[6]);
+  RF(LP0_REGNUM + 1, inferior_fpregisters.r_freg[1]);
+  RF(LP0_REGNUM + 3, inferior_fpregisters.r_freg[3]);
+  RF(LP0_REGNUM + 5, inferior_fpregisters.r_freg[5]);
+  RF(LP0_REGNUM + 7, inferior_fpregisters.r_freg[7]);
+   registers_fetched ();
+}
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct reg inferior_registers;
+  struct fpreg inferior_fpregisters;
+
+  RS(R0_REGNUM + 0, inferior_registers.r_r0);
+  RS(R0_REGNUM + 1, inferior_registers.r_r1);
+  RS(R0_REGNUM + 2, inferior_registers.r_r2);
+  RS(R0_REGNUM + 3, inferior_registers.r_r3);
+  RS(R0_REGNUM + 4, inferior_registers.r_r4);
+  RS(R0_REGNUM + 5, inferior_registers.r_r5);
+  RS(R0_REGNUM + 6, inferior_registers.r_r6);
+  RS(R0_REGNUM + 7, inferior_registers.r_r7);
+
+  RS(SP_REGNUM	  , inferior_registers.r_sp);
+  RS(FP_REGNUM	  , inferior_registers.r_fp);
+  RS(PC_REGNUM	  , inferior_registers.r_pc);
+  RS(PS_REGNUM	  , inferior_registers.r_psr);
+
+  RS(FPS_REGNUM   , inferior_fpregisters.r_fsr);
+  RS(FP0_REGNUM +0, inferior_fpregisters.r_freg[0]);
+  RS(FP0_REGNUM +2, inferior_fpregisters.r_freg[2]);
+  RS(FP0_REGNUM +4, inferior_fpregisters.r_freg[4]);
+  RS(FP0_REGNUM +6, inferior_fpregisters.r_freg[6]);
+  RS(LP0_REGNUM + 1, inferior_fpregisters.r_freg[1]);
+  RS(LP0_REGNUM + 3, inferior_fpregisters.r_freg[3]);
+  RS(LP0_REGNUM + 5, inferior_fpregisters.r_freg[5]);
+  RS(LP0_REGNUM + 7, inferior_fpregisters.r_freg[7]);
+
+  ptrace (PT_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers, 0);
+  ptrace (PT_SETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fpregisters, 0);
+}
+
+
+/* XXX - Add this to machine/regs.h instead? */
+struct coreregs {
+  struct reg intreg;
+  struct fpreg freg;
+};
+
+/* Get registers from a core file. */
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     unsigned int reg_addr;	/* Unused in this version */
+{
+  struct coreregs *core_reg;
+
+  core_reg = (struct coreregs *)core_reg_sect;
+
+  /*
+   * We have *all* registers
+   * in the first core section.
+   * Ignore which.
+   */
+
+  if (core_reg_size < sizeof(*core_reg)) {
+    fprintf_unfiltered (gdb_stderr, "Couldn't read regs from core file\n");
+    return;
+  }
+
+  /* Integer registers */
+  RF(R0_REGNUM + 0, core_reg->intreg.r_r0);
+  RF(R0_REGNUM + 1, core_reg->intreg.r_r1);
+  RF(R0_REGNUM + 2, core_reg->intreg.r_r2);
+  RF(R0_REGNUM + 3, core_reg->intreg.r_r3);
+  RF(R0_REGNUM + 4, core_reg->intreg.r_r4);
+  RF(R0_REGNUM + 5, core_reg->intreg.r_r5);
+  RF(R0_REGNUM + 6, core_reg->intreg.r_r6);
+  RF(R0_REGNUM + 7, core_reg->intreg.r_r7);
+
+  RF(SP_REGNUM	  , core_reg->intreg.r_sp);
+  RF(FP_REGNUM	  , core_reg->intreg.r_fp);
+  RF(PC_REGNUM	  , core_reg->intreg.r_pc);
+  RF(PS_REGNUM	  , core_reg->intreg.r_psr);
+
+  /* Floating point registers */
+  RF(FPS_REGNUM   , core_reg->freg.r_fsr);
+  RF(FP0_REGNUM +0, core_reg->freg.r_freg[0]);
+  RF(FP0_REGNUM +2, core_reg->freg.r_freg[2]);
+  RF(FP0_REGNUM +4, core_reg->freg.r_freg[4]);
+  RF(FP0_REGNUM +6, core_reg->freg.r_freg[6]);
+  RF(LP0_REGNUM + 1, core_reg->freg.r_freg[1]);
+  RF(LP0_REGNUM + 3, core_reg->freg.r_freg[3]);
+  RF(LP0_REGNUM + 5, core_reg->freg.r_freg[5]);
+  RF(LP0_REGNUM + 7, core_reg->freg.r_freg[7]);
+  registers_fetched ();
+}
+
+/* Register that we are able to handle ns32knbsd core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns nat_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_ns32knbsd_nat ()
+{
+  add_core_fns (&nat_core_fns);
+}
+
+
+/*
+ * kernel_u_size() is not helpful on NetBSD because
+ * the "u" struct is NOT in the core dump file.
+ */
+
+#ifdef	FETCH_KCORE_REGISTERS
+/*
+ * Get registers from a kernel crash dump or live kernel.
+ * Called by kcore-nbsd.c:get_kcore_registers().
+ */
+void
+fetch_kcore_registers (pcb)
+     struct pcb *pcb;
+{
+  struct switchframe sf;
+  struct reg intreg;
+  int dummy;
+
+  /* Integer registers */
+  if (target_read_memory((CORE_ADDR)pcb->pcb_ksp, (char *)&sf, sizeof sf))
+     error("Cannot read integer registers.");
+
+  /* We use the psr at kernel entry */
+  if (target_read_memory((CORE_ADDR)pcb->pcb_onstack, (char *)&intreg, sizeof intreg))
+     error("Cannot read processor status register.");
+
+  dummy = 0;
+  RF(R0_REGNUM + 0, dummy);
+  RF(R0_REGNUM + 1, dummy);
+  RF(R0_REGNUM + 2, dummy);
+  RF(R0_REGNUM + 3, sf.sf_r3);
+  RF(R0_REGNUM + 4, sf.sf_r4);
+  RF(R0_REGNUM + 5, sf.sf_r5);
+  RF(R0_REGNUM + 6, sf.sf_r6);
+  RF(R0_REGNUM + 7, sf.sf_r7);
+
+  dummy = pcb->pcb_kfp + 8;
+  RF(SP_REGNUM	  , dummy);
+  RF(FP_REGNUM	  , sf.sf_fp);
+  RF(PC_REGNUM	  , sf.sf_pc);
+  RF(PS_REGNUM	  , intreg.r_psr);
+
+  /* Floating point registers */
+  RF(FPS_REGNUM   , pcb->pcb_fsr);
+  RF(FP0_REGNUM +0, pcb->pcb_freg[0]);
+  RF(FP0_REGNUM +2, pcb->pcb_freg[2]);
+  RF(FP0_REGNUM +4, pcb->pcb_freg[4]);
+  RF(FP0_REGNUM +6, pcb->pcb_freg[6]);
+  RF(LP0_REGNUM + 1, pcb->pcb_freg[1]);
+  RF(LP0_REGNUM + 3, pcb->pcb_freg[3]);
+  RF(LP0_REGNUM + 5, pcb->pcb_freg[5]);
+  RF(LP0_REGNUM + 7, pcb->pcb_freg[7]);
+  registers_fetched ();
+}
+#endif	/* FETCH_KCORE_REGISTERS */
+
+void
+clear_regs()
+{
+  double zero = 0.0;
+  int null = 0;
+  
+  /* Integer registers */
+  RF(R0_REGNUM + 0, null);
+  RF(R0_REGNUM + 1, null);
+  RF(R0_REGNUM + 2, null);
+  RF(R0_REGNUM + 3, null);
+  RF(R0_REGNUM + 4, null);
+  RF(R0_REGNUM + 5, null);
+  RF(R0_REGNUM + 6, null);
+  RF(R0_REGNUM + 7, null);
+
+  RF(SP_REGNUM	  , null);
+  RF(FP_REGNUM	  , null);
+  RF(PC_REGNUM	  , null);
+  RF(PS_REGNUM	  , null);
+
+  /* Floating point registers */
+  RF(FPS_REGNUM   , zero);
+  RF(FP0_REGNUM +0, zero);
+  RF(FP0_REGNUM +2, zero);
+  RF(FP0_REGNUM +4, zero);
+  RF(FP0_REGNUM +6, zero);
+  RF(LP0_REGNUM + 0, zero);
+  RF(LP0_REGNUM + 1, zero);
+  RF(LP0_REGNUM + 2, zero);
+  RF(LP0_REGNUM + 3, zero);
+  return;
+}
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell. */
+
+int
+frame_num_args(fi)
+struct frame_info *fi;
+{
+	CORE_ADDR	enter_addr;
+	CORE_ADDR	argp;
+	int		inst;
+	int		args;
+	int		i;
+
+	if (read_memory_integer (fi->frame, 4) == 0 && fi->pc < 0x10000) {
+		/* main is always called with three args */
+		return(3);
+	}
+	enter_addr = ns32k_get_enter_addr(fi->pc);
+	if (enter_addr = 0)
+		return(-1);
+	argp = enter_addr == 1 ? SAVED_PC_AFTER_CALL(fi) : FRAME_SAVED_PC(fi);
+	for (i = 0; i < 16; i++) {
+		/*
+		 * After a bsr gcc may emit the following instructions
+		 * to remove the arguments from the stack:
+		 *   cmpqd 0,tos 	- to remove 4 bytes from the stack
+		 *   cmpd tos,tos	- to remove 8 bytes from the stack
+		 *   adjsp[bwd] -n	- to remove n bytes from the stack
+		 * Gcc sometimes delays emitting these instructions and
+		 * may even throw a branch between our feet.
+		 */		 
+		inst = read_memory_integer(argp    , 4);
+		args = read_memory_integer(argp + 2, 4);
+		if ((inst & 0xff) == 0xea) {		/* br */
+			args = ((inst >> 8) & 0xffffff) | (args << 24);
+			if (args & 0x80) {
+				if (args & 0x40) {
+					args = ntohl(args);
+				} else {
+					args = ntohs(args & 0xffff);
+					if (args & 0x2000)
+						args |= 0xc000;
+				}
+			} else {
+				args = args & 0xff;
+				if (args & 0x40)
+					args |= 0x80;
+			}
+			argp += args;
+			continue;
+		}
+		if ((inst & 0xffff) == 0xb81f)		/* cmpqd 0,tos */
+			return(1);
+		else if ((inst & 0xffff) == 0xbdc7)	/* cmpd tos,tos */
+			return(2);
+		else if ((inst & 0xfffc) == 0xa57c) {	/* adjsp[bwd] */
+			switch (inst & 3) {
+			case 0:
+				args = ((args & 0xff) + 0x80);
+				break;
+			case 1:
+				args = ((ntohs(args) & 0xffff) + 0x8000);
+				break;
+			case 3:
+				args = -ntohl(args);
+				break;
+			default:
+				return(-1);
+			}
+			if (args / 4 > 10 || (args & 3) != 0)
+				continue;
+			return(args / 4);
+		}
+		argp += 1;
+	}
+	return(-1);
+}
diff --git a/gdb/objfiles.c b/gdb/objfiles.c
new file mode 100644
index 0000000..971a7d4
--- /dev/null
+++ b/gdb/objfiles.c
@@ -0,0 +1,988 @@
+/* GDB routines for manipulating objfiles.
+   Copyright 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support, using pieces from other GDB modules.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file contains support routines for creating, manipulating, and
+   destroying objfile structures. */
+
+#include "defs.h"
+#include "bfd.h"		/* Binary File Description */
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "target.h"
+
+#include <sys/types.h>
+#include "gdb_stat.h"
+#include <fcntl.h>
+#include "obstack.h"
+#include "gdb_string.h"
+
+/* Prototypes for local functions */
+
+#if defined(USE_MMALLOC) && defined(HAVE_MMAP)
+
+static int
+open_existing_mapped_file PARAMS ((char *, long, int));
+
+static int
+open_mapped_file PARAMS ((char *filename, long mtime, int mapped));
+
+static PTR
+map_to_file PARAMS ((int));
+
+#endif  /* defined(USE_MMALLOC) && defined(HAVE_MMAP) */
+
+static void
+add_to_objfile_sections PARAMS ((bfd *, sec_ptr, PTR));
+
+/* Externally visible variables that are owned by this module.
+   See declarations in objfile.h for more info. */
+
+struct objfile *object_files;		/* Linked list of all objfiles */
+struct objfile *current_objfile;	/* For symbol file being read in */
+struct objfile *symfile_objfile;	/* Main symbol table loaded from */
+struct objfile *rt_common_objfile;	/* For runtime common symbols */
+
+int mapped_symbol_files;		/* Try to use mapped symbol files */
+
+/* Locate all mappable sections of a BFD file. 
+   objfile_p_char is a char * to get it through
+   bfd_map_over_sections; we cast it back to its proper type.  */
+
+#ifndef TARGET_KEEP_SECTION
+#define TARGET_KEEP_SECTION(ASECT)	0
+#endif
+
+static void
+add_to_objfile_sections (abfd, asect, objfile_p_char)
+     bfd *abfd;
+     sec_ptr asect;
+     PTR objfile_p_char;
+{
+  struct objfile *objfile = (struct objfile *) objfile_p_char;
+  struct obj_section section;
+  flagword aflag;
+
+  aflag = bfd_get_section_flags (abfd, asect);
+
+  if (!(aflag & SEC_ALLOC) && !(TARGET_KEEP_SECTION(asect)))
+    return;
+
+  if (0 == bfd_section_size (abfd, asect))
+    return;
+  section.offset = 0;
+  section.objfile = objfile;
+  section.the_bfd_section = asect;
+  section.ovly_mapped = 0;
+  section.addr = bfd_section_vma (abfd, asect);
+  section.endaddr = section.addr + bfd_section_size (abfd, asect);
+  obstack_grow (&objfile->psymbol_obstack, (char *) &section, sizeof(section));
+  objfile->sections_end = (struct obj_section *) (((unsigned long) objfile->sections_end) + 1);
+}
+
+/* Builds a section table for OBJFILE.
+   Returns 0 if OK, 1 on error (in which case bfd_error contains the
+   error).  */
+
+int
+build_objfile_section_table (objfile)
+     struct objfile *objfile;
+{
+  /* objfile->sections can be already set when reading a mapped symbol
+     file.  I believe that we do need to rebuild the section table in
+     this case (we rebuild other things derived from the bfd), but we
+     can't free the old one (it's in the psymbol_obstack).  So we just
+     waste some memory.  */
+
+  objfile->sections_end = 0;
+  bfd_map_over_sections (objfile->obfd, add_to_objfile_sections, (char *)objfile);
+  objfile->sections = (struct obj_section *)
+    obstack_finish (&objfile->psymbol_obstack);
+  objfile->sections_end = objfile->sections + (unsigned long) objfile->sections_end;
+  return(0);
+}
+
+/* Given a pointer to an initialized bfd (ABFD) and a flag that indicates
+   whether or not an objfile is to be mapped (MAPPED), allocate a new objfile
+   struct, fill it in as best we can, link it into the list of all known
+   objfiles, and return a pointer to the new objfile struct.
+
+   USER_LOADED is simply recorded in the objfile.  This record offers a way for
+   run_command to remove old objfile entries which are no longer valid (i.e.,
+   are associated with an old inferior), but to preserve ones that the user
+   explicitly loaded via the add-symbol-file command.
+
+   IS_SOLIB is also simply recorded in the objfile. */
+
+struct objfile *
+allocate_objfile (abfd, mapped, user_loaded, is_solib)
+     bfd *abfd;
+     int mapped;
+     int  user_loaded;
+     int  is_solib;
+{
+  struct objfile *objfile = NULL;
+  struct objfile *last_one = NULL;
+
+  mapped |= mapped_symbol_files;
+
+#if defined(USE_MMALLOC) && defined(HAVE_MMAP)
+  if (abfd != NULL)
+  {
+
+    /* If we can support mapped symbol files, try to open/reopen the
+       mapped file that corresponds to the file from which we wish to
+       read symbols.  If the objfile is to be mapped, we must malloc
+       the structure itself using the mmap version, and arrange that
+       all memory allocation for the objfile uses the mmap routines.
+       If we are reusing an existing mapped file, from which we get
+       our objfile pointer, we have to make sure that we update the
+       pointers to the alloc/free functions in the obstack, in case
+       these functions have moved within the current gdb.  */
+
+    int fd;
+
+    fd = open_mapped_file (bfd_get_filename (abfd), bfd_get_mtime (abfd),
+			   mapped);
+    if (fd >= 0)
+      {
+	PTR md;
+
+	if ((md = map_to_file (fd)) == NULL)
+	  {
+	    close (fd);
+	  }
+	else if ((objfile = (struct objfile *) mmalloc_getkey (md, 0)) != NULL)
+	  {
+	    /* Update memory corruption handler function addresses. */
+	    init_malloc (md);
+	    objfile -> md = md;
+	    objfile -> mmfd = fd;
+	    /* Update pointers to functions to *our* copies */
+	    obstack_chunkfun (&objfile -> psymbol_cache.cache, xmmalloc);
+	    obstack_freefun (&objfile -> psymbol_cache.cache, mfree);
+	    obstack_chunkfun (&objfile -> psymbol_obstack, xmmalloc);
+	    obstack_freefun (&objfile -> psymbol_obstack, mfree);
+	    obstack_chunkfun (&objfile -> symbol_obstack, xmmalloc);
+	    obstack_freefun (&objfile -> symbol_obstack, mfree);
+	    obstack_chunkfun (&objfile -> type_obstack, xmmalloc);
+	    obstack_freefun (&objfile -> type_obstack, mfree);
+	    /* If already in objfile list, unlink it. */
+	    unlink_objfile (objfile);
+	    /* Forget things specific to a particular gdb, may have changed. */
+	    objfile -> sf = NULL;
+	  }
+	else
+	  {
+
+	    /* Set up to detect internal memory corruption.  MUST be
+	       done before the first malloc.  See comments in
+	       init_malloc() and mmcheck().  */
+
+	    init_malloc (md);
+
+	    objfile = (struct objfile *)
+	      xmmalloc (md, sizeof (struct objfile));
+	    memset (objfile, 0, sizeof (struct objfile));
+	    objfile -> md = md;
+	    objfile -> mmfd = fd;
+	    objfile -> flags |= OBJF_MAPPED;
+	    mmalloc_setkey (objfile -> md, 0, objfile);
+	    obstack_specify_allocation_with_arg (&objfile -> psymbol_cache.cache,
+						 0, 0, xmmalloc, mfree,
+						 objfile -> md);
+	    obstack_specify_allocation_with_arg (&objfile -> psymbol_obstack,
+						 0, 0, xmmalloc, mfree,
+						 objfile -> md);
+	    obstack_specify_allocation_with_arg (&objfile -> symbol_obstack,
+						 0, 0, xmmalloc, mfree,
+						 objfile -> md);
+	    obstack_specify_allocation_with_arg (&objfile -> type_obstack,
+						 0, 0, xmmalloc, mfree,
+						 objfile -> md);
+	  }
+      }
+
+    if (mapped && (objfile == NULL))
+      {
+	warning ("symbol table for '%s' will not be mapped",
+		 bfd_get_filename (abfd));
+      }
+  }
+#else	/* !defined(USE_MMALLOC) || !defined(HAVE_MMAP) */
+
+  if (mapped)
+    {
+      warning ("mapped symbol tables are not supported on this machine; missing or broken mmap().");
+
+      /* Turn off the global flag so we don't try to do mapped symbol tables
+	 any more, which shuts up gdb unless the user specifically gives the
+	 "mapped" keyword again. */
+
+      mapped_symbol_files = 0;
+    }
+
+#endif	/* defined(USE_MMALLOC) && defined(HAVE_MMAP) */
+
+  /* If we don't support mapped symbol files, didn't ask for the file to be
+     mapped, or failed to open the mapped file for some reason, then revert
+     back to an unmapped objfile. */
+
+  if (objfile == NULL)
+    {
+      objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
+      memset (objfile, 0, sizeof (struct objfile));
+      objfile -> md = NULL;
+      obstack_specify_allocation (&objfile -> psymbol_cache.cache, 0, 0,
+				  xmalloc, free);
+      obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0, xmalloc,
+				  free);
+      obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0, xmalloc,
+				  free);
+      obstack_specify_allocation (&objfile -> type_obstack, 0, 0, xmalloc,
+				  free);
+    }
+
+  /* Update the per-objfile information that comes from the bfd, ensuring
+     that any data that is reference is saved in the per-objfile data
+     region. */
+
+  objfile -> obfd = abfd;
+  if (objfile -> name != NULL)
+    {
+      mfree (objfile -> md, objfile -> name);
+    }
+  if (abfd != NULL)
+    {
+      objfile -> name = mstrsave (objfile -> md, bfd_get_filename (abfd));
+      objfile -> mtime = bfd_get_mtime (abfd);
+
+      /* Build section table.  */
+
+      if (build_objfile_section_table (objfile))
+	{
+	  error ("Can't find the file sections in `%s': %s", 
+		 objfile -> name, bfd_errmsg (bfd_get_error ()));
+	}
+    }
+
+  /* Add this file onto the tail of the linked list of other such files. */
+
+  objfile -> next = NULL;
+  if (object_files == NULL)
+    object_files = objfile;
+  else
+    {
+      for (last_one = object_files;
+	   last_one -> next;
+	   last_one = last_one -> next);
+      last_one -> next = objfile;
+    }
+
+  /* Record whether this objfile was created because the user explicitly
+     caused it (e.g., used the add-symbol-file command).
+     */
+  objfile -> user_loaded = user_loaded;
+
+  /* Record whether this objfile definitely represents a solib. */
+  objfile -> is_solib = is_solib;
+
+  return (objfile);
+}
+
+/* Put OBJFILE at the front of the list.  */
+
+void
+objfile_to_front (objfile)
+     struct objfile *objfile;
+{
+  struct objfile **objp;
+  for (objp = &object_files; *objp != NULL; objp = &((*objp)->next))
+    {
+      if (*objp == objfile)
+	{
+	  /* Unhook it from where it is.  */
+	  *objp = objfile->next;
+	  /* Put it in the front.  */
+	  objfile->next = object_files;
+	  object_files = objfile;
+	  break;
+	}
+    }
+}
+
+/* Unlink OBJFILE from the list of known objfiles, if it is found in the
+   list.
+
+   It is not a bug, or error, to call this function if OBJFILE is not known
+   to be in the current list.  This is done in the case of mapped objfiles,
+   for example, just to ensure that the mapped objfile doesn't appear twice
+   in the list.  Since the list is threaded, linking in a mapped objfile
+   twice would create a circular list.
+
+   If OBJFILE turns out to be in the list, we zap it's NEXT pointer after
+   unlinking it, just to ensure that we have completely severed any linkages
+   between the OBJFILE and the list. */
+
+void
+unlink_objfile (objfile)
+     struct objfile *objfile;
+{
+  struct objfile** objpp;
+
+  for (objpp = &object_files; *objpp != NULL; objpp = &((*objpp) -> next))
+    {
+      if (*objpp == objfile) 
+	{
+	  *objpp = (*objpp) -> next;
+	  objfile -> next = NULL;
+	  break;
+	}
+    }
+}
+
+
+/* Destroy an objfile and all the symtabs and psymtabs under it.  Note
+   that as much as possible is allocated on the symbol_obstack and
+   psymbol_obstack, so that the memory can be efficiently freed.
+
+   Things which we do NOT free because they are not in malloc'd memory
+   or not in memory specific to the objfile include:
+
+   	objfile -> sf
+
+   FIXME:  If the objfile is using reusable symbol information (via mmalloc),
+   then we need to take into account the fact that more than one process
+   may be using the symbol information at the same time (when mmalloc is
+   extended to support cooperative locking).  When more than one process
+   is using the mapped symbol info, we need to be more careful about when
+   we free objects in the reusable area. */
+
+void
+free_objfile (objfile)
+     struct objfile *objfile;
+{
+  /* First do any symbol file specific actions required when we are
+     finished with a particular symbol file.  Note that if the objfile
+     is using reusable symbol information (via mmalloc) then each of
+     these routines is responsible for doing the correct thing, either
+     freeing things which are valid only during this particular gdb
+     execution, or leaving them to be reused during the next one. */
+
+  if (objfile -> sf != NULL)
+    {
+      (*objfile -> sf -> sym_finish) (objfile);
+    }
+
+  /* We always close the bfd. */
+
+  if (objfile -> obfd != NULL)
+    {
+      char *name = bfd_get_filename (objfile->obfd);
+      if (!bfd_close (objfile -> obfd))
+	warning ("cannot close \"%s\": %s",
+		 name, bfd_errmsg (bfd_get_error ()));
+      free (name);
+    }
+
+  /* Remove it from the chain of all objfiles. */
+
+  unlink_objfile (objfile);
+
+  /* If we are going to free the runtime common objfile, mark it
+     as unallocated.  */
+
+  if (objfile == rt_common_objfile)
+    rt_common_objfile = NULL;
+
+  /* Before the symbol table code was redone to make it easier to
+     selectively load and remove information particular to a specific
+     linkage unit, gdb used to do these things whenever the monolithic
+     symbol table was blown away.  How much still needs to be done
+     is unknown, but we play it safe for now and keep each action until
+     it is shown to be no longer needed. */
+     
+#if defined (CLEAR_SOLIB)
+  CLEAR_SOLIB ();
+  /* CLEAR_SOLIB closes the bfd's for any shared libraries.  But
+     the to_sections for a core file might refer to those bfd's.  So
+     detach any core file.  */
+  {
+    struct target_ops *t = find_core_target ();
+    if (t != NULL)
+      (t->to_detach) (NULL, 0);
+  }
+#endif
+  /* I *think* all our callers call clear_symtab_users.  If so, no need
+     to call this here.  */
+  clear_pc_function_cache ();
+
+  /* The last thing we do is free the objfile struct itself for the
+     non-reusable case, or detach from the mapped file for the reusable
+     case.  Note that the mmalloc_detach or the mfree is the last thing
+     we can do with this objfile. */
+
+#if defined(USE_MMALLOC) && defined(HAVE_MMAP)
+
+  if (objfile -> flags & OBJF_MAPPED)
+    {
+      /* Remember the fd so we can close it.  We can't close it before
+	 doing the detach, and after the detach the objfile is gone. */
+      int mmfd;
+
+      mmfd = objfile -> mmfd;
+      mmalloc_detach (objfile -> md);
+      objfile = NULL;
+      close (mmfd);
+    }
+
+#endif	/* defined(USE_MMALLOC) && defined(HAVE_MMAP) */
+
+  /* If we still have an objfile, then either we don't support reusable
+     objfiles or this one was not reusable.  So free it normally. */
+
+  if (objfile != NULL)
+    {
+      if (objfile -> name != NULL)
+	{
+	  mfree (objfile -> md, objfile -> name);
+	}
+      if (objfile->global_psymbols.list)
+	mfree (objfile->md, objfile->global_psymbols.list);
+      if (objfile->static_psymbols.list)
+	mfree (objfile->md, objfile->static_psymbols.list);
+      /* Free the obstacks for non-reusable objfiles */
+      obstack_free (&objfile -> psymbol_cache.cache, 0);
+      obstack_free (&objfile -> psymbol_obstack, 0);
+      obstack_free (&objfile -> symbol_obstack, 0);
+      obstack_free (&objfile -> type_obstack, 0);
+      mfree (objfile -> md, objfile);
+      objfile = NULL;
+    }
+}
+
+
+/* Free all the object files at once and clean up their users.  */
+
+void
+free_all_objfiles ()
+{
+  struct objfile *objfile, *temp;
+
+  ALL_OBJFILES_SAFE (objfile, temp)
+    {
+      free_objfile (objfile);
+    }
+  clear_symtab_users ();
+}
+
+/* Relocate OBJFILE to NEW_OFFSETS.  There should be OBJFILE->NUM_SECTIONS
+   entries in new_offsets.  */
+void
+objfile_relocate (objfile, new_offsets)
+     struct objfile *objfile;
+     struct section_offsets *new_offsets;
+{
+  struct section_offsets *delta = (struct section_offsets *) 
+    alloca (sizeof (struct section_offsets)
+	    + objfile->num_sections * sizeof (delta->offsets));
+
+  {
+    int i;
+    int something_changed = 0;
+    for (i = 0; i < objfile->num_sections; ++i)
+      {
+	ANOFFSET (delta, i) =
+	  ANOFFSET (new_offsets, i) - ANOFFSET (objfile->section_offsets, i);
+	if (ANOFFSET (delta, i) != 0)
+	  something_changed = 1;
+      }
+    if (!something_changed)
+      return;
+  }
+
+  /* OK, get all the symtabs.  */
+  {
+    struct symtab *s;
+
+    ALL_OBJFILE_SYMTABS (objfile, s)
+      {
+	struct linetable *l;
+	struct blockvector *bv;
+	int i;
+	
+	/* First the line table.  */
+	l = LINETABLE (s);
+	if (l)
+	  {
+	    for (i = 0; i < l->nitems; ++i)
+	      l->item[i].pc += ANOFFSET (delta, s->block_line_section);
+	  }
+
+	/* Don't relocate a shared blockvector more than once.  */
+	if (!s->primary)
+	  continue;
+
+	bv = BLOCKVECTOR (s);
+	for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); ++i)
+	  {
+	    struct block *b;
+	    int j;
+	    
+	    b = BLOCKVECTOR_BLOCK (bv, i);
+	    BLOCK_START (b) += ANOFFSET (delta, s->block_line_section);
+	    BLOCK_END (b)   += ANOFFSET (delta, s->block_line_section);
+
+	    for (j = 0; j < BLOCK_NSYMS (b); ++j)
+	      {
+		struct symbol *sym = BLOCK_SYM (b, j);
+		/* The RS6000 code from which this was taken skipped
+		   any symbols in STRUCT_NAMESPACE or UNDEF_NAMESPACE.
+		   But I'm leaving out that test, on the theory that
+		   they can't possibly pass the tests below.  */
+		if ((SYMBOL_CLASS (sym) == LOC_LABEL
+		     || SYMBOL_CLASS (sym) == LOC_STATIC 
+                     || SYMBOL_CLASS (sym) == LOC_INDIRECT)
+		    && SYMBOL_SECTION (sym) >= 0)
+		  {
+		    SYMBOL_VALUE_ADDRESS (sym) += 
+		      ANOFFSET (delta, SYMBOL_SECTION (sym));
+		  }
+#ifdef MIPS_EFI_SYMBOL_NAME
+		/* Relocate Extra Function Info for ecoff.  */
+
+		else
+		  if (SYMBOL_CLASS (sym) == LOC_CONST
+		      && SYMBOL_NAMESPACE (sym) == LABEL_NAMESPACE
+		      && STRCMP (SYMBOL_NAME (sym), MIPS_EFI_SYMBOL_NAME) == 0)
+		ecoff_relocate_efi (sym, ANOFFSET (delta, 
+						   s->block_line_section));
+#endif
+	      }
+	  }
+      }
+  }
+
+  {
+    struct partial_symtab *p;
+
+    ALL_OBJFILE_PSYMTABS (objfile, p)
+      {
+	p->textlow += ANOFFSET (delta, SECT_OFF_TEXT);
+	p->texthigh += ANOFFSET (delta, SECT_OFF_TEXT);
+      }
+  }
+
+  {
+    struct partial_symbol **psym;
+
+    for (psym = objfile->global_psymbols.list;
+	 psym < objfile->global_psymbols.next;
+	 psym++)
+      if (SYMBOL_SECTION (*psym) >= 0)
+	SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta, 
+						  SYMBOL_SECTION (*psym));
+    for (psym = objfile->static_psymbols.list;
+	 psym < objfile->static_psymbols.next;
+	 psym++)
+      if (SYMBOL_SECTION (*psym) >= 0)
+	SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta, 
+						  SYMBOL_SECTION (*psym));
+  }
+
+  {
+    struct minimal_symbol *msym;
+    ALL_OBJFILE_MSYMBOLS (objfile, msym)
+      if (SYMBOL_SECTION (msym) >= 0)
+	SYMBOL_VALUE_ADDRESS (msym) += ANOFFSET (delta, SYMBOL_SECTION (msym));
+  }
+  /* Relocating different sections by different amounts may cause the symbols
+     to be out of order.  */
+  msymbols_sort (objfile);
+
+  {
+    int i;
+    for (i = 0; i < objfile->num_sections; ++i)
+      ANOFFSET (objfile->section_offsets, i) = ANOFFSET (new_offsets, i);
+  }
+
+  {
+    struct obj_section *s;
+    bfd *abfd;
+
+    abfd = objfile->obfd;
+
+    for (s = objfile->sections;
+	 s < objfile->sections_end; ++s)
+      {
+	flagword flags;
+
+	flags = bfd_get_section_flags (abfd, s->the_bfd_section);
+
+	if (flags & SEC_CODE)
+	  {
+	    s->addr    += ANOFFSET (delta, SECT_OFF_TEXT);
+	    s->endaddr += ANOFFSET (delta, SECT_OFF_TEXT);
+	  }
+	else if (flags & (SEC_DATA | SEC_LOAD))
+	  {
+	    s->addr    += ANOFFSET (delta, SECT_OFF_DATA);
+	    s->endaddr += ANOFFSET (delta, SECT_OFF_DATA);
+	  }
+	else if (flags & SEC_ALLOC)
+	  {
+	    s->addr    += ANOFFSET (delta, SECT_OFF_BSS);
+	    s->endaddr += ANOFFSET (delta, SECT_OFF_BSS);
+	  }
+      }
+  }
+
+  if (objfile->ei.entry_point != ~(CORE_ADDR)0)
+    objfile->ei.entry_point += ANOFFSET (delta, SECT_OFF_TEXT);
+
+  if (objfile->ei.entry_func_lowpc != INVALID_ENTRY_LOWPC)
+    {
+      objfile->ei.entry_func_lowpc  += ANOFFSET (delta, SECT_OFF_TEXT);
+      objfile->ei.entry_func_highpc += ANOFFSET (delta, SECT_OFF_TEXT);
+    }
+
+  if (objfile->ei.entry_file_lowpc != INVALID_ENTRY_LOWPC)
+    {
+      objfile->ei.entry_file_lowpc  += ANOFFSET (delta, SECT_OFF_TEXT);
+      objfile->ei.entry_file_highpc += ANOFFSET (delta, SECT_OFF_TEXT);
+    }
+
+  if (objfile->ei.main_func_lowpc != INVALID_ENTRY_LOWPC)
+    {
+      objfile->ei.main_func_lowpc  += ANOFFSET (delta, SECT_OFF_TEXT);
+      objfile->ei.main_func_highpc += ANOFFSET (delta, SECT_OFF_TEXT);
+    }
+
+  /* Relocate breakpoints as necessary, after things are relocated. */
+  breakpoint_re_set ();
+}
+
+/* Many places in gdb want to test just to see if we have any partial
+   symbols available.  This function returns zero if none are currently
+   available, nonzero otherwise. */
+
+int
+have_partial_symbols ()
+{
+  struct objfile *ofp;
+
+  ALL_OBJFILES (ofp)
+    {
+      if (ofp -> psymtabs != NULL)
+	{
+	  return 1;
+	}
+    }
+  return 0;
+}
+
+/* Many places in gdb want to test just to see if we have any full
+   symbols available.  This function returns zero if none are currently
+   available, nonzero otherwise. */
+
+int
+have_full_symbols ()
+{
+  struct objfile *ofp;
+
+  ALL_OBJFILES (ofp)
+    {
+      if (ofp -> symtabs != NULL)
+	{
+	  return 1;
+	}
+    }
+  return 0;
+}
+
+
+/* This operations deletes all objfile entries that represent solibs that
+   weren't explicitly loaded by the user, via e.g., the add-symbol-file
+   command.
+   */
+void
+objfile_purge_solibs ()
+{
+  struct objfile *  objf;
+  struct objfile *  temp;
+
+  ALL_OBJFILES_SAFE (objf, temp)
+  {
+    /* We assume that the solib package has been purged already, or will
+       be soon.
+       */
+    if (! objf->user_loaded && objf->is_solib)
+      free_objfile (objf);
+  }
+}
+
+
+/* Many places in gdb want to test just to see if we have any minimal
+   symbols available.  This function returns zero if none are currently
+   available, nonzero otherwise. */
+
+int
+have_minimal_symbols ()
+{
+  struct objfile *ofp;
+
+  ALL_OBJFILES (ofp)
+    {
+      if (ofp -> msymbols != NULL)
+	{
+	  return 1;
+	}
+    }
+  return 0;
+}
+
+#if defined(USE_MMALLOC) && defined(HAVE_MMAP)
+
+/* Given the name of a mapped symbol file in SYMSFILENAME, and the timestamp
+   of the corresponding symbol file in MTIME, try to open an existing file
+   with the name SYMSFILENAME and verify it is more recent than the base
+   file by checking it's timestamp against MTIME.
+
+   If SYMSFILENAME does not exist (or can't be stat'd), simply returns -1.
+
+   If SYMSFILENAME does exist, but is out of date, we check to see if the
+   user has specified creation of a mapped file.  If so, we don't issue
+   any warning message because we will be creating a new mapped file anyway,
+   overwriting the old one.  If not, then we issue a warning message so that
+   the user will know why we aren't using this existing mapped symbol file.
+   In either case, we return -1.
+
+   If SYMSFILENAME does exist and is not out of date, but can't be opened for
+   some reason, then prints an appropriate system error message and returns -1.
+
+   Otherwise, returns the open file descriptor.  */
+
+static int
+open_existing_mapped_file (symsfilename, mtime, mapped)
+     char *symsfilename;
+     long mtime;
+     int mapped;
+{
+  int fd = -1;
+  struct stat sbuf;
+
+  if (stat (symsfilename, &sbuf) == 0)
+    {
+      if (sbuf.st_mtime < mtime)
+	{
+	  if (!mapped)
+	    {
+	      warning ("mapped symbol file `%s' is out of date, ignored it",
+		       symsfilename);
+	    }
+	}
+      else if ((fd = open (symsfilename, O_RDWR)) < 0)
+	{
+	  if (error_pre_print)
+	    {
+	      printf_unfiltered (error_pre_print);
+	    }
+	  print_sys_errmsg (symsfilename, errno);
+	}
+    }
+  return (fd);
+}
+
+/* Look for a mapped symbol file that corresponds to FILENAME and is more
+   recent than MTIME.  If MAPPED is nonzero, the user has asked that gdb
+   use a mapped symbol file for this file, so create a new one if one does
+   not currently exist.
+
+   If found, then return an open file descriptor for the file, otherwise
+   return -1.
+
+   This routine is responsible for implementing the policy that generates
+   the name of the mapped symbol file from the name of a file containing
+   symbols that gdb would like to read.  Currently this policy is to append
+   ".syms" to the name of the file.
+
+   This routine is also responsible for implementing the policy that
+   determines where the mapped symbol file is found (the search path).
+   This policy is that when reading an existing mapped file, a file of
+   the correct name in the current directory takes precedence over a
+   file of the correct name in the same directory as the symbol file.
+   When creating a new mapped file, it is always created in the current
+   directory.  This helps to minimize the chances of a user unknowingly
+   creating big mapped files in places like /bin and /usr/local/bin, and
+   allows a local copy to override a manually installed global copy (in
+   /bin for example).  */
+
+static int
+open_mapped_file (filename, mtime, mapped)
+     char *filename;
+     long mtime;
+     int mapped;
+{
+  int fd;
+  char *symsfilename;
+
+  /* First try to open an existing file in the current directory, and
+     then try the directory where the symbol file is located. */
+
+  symsfilename = concat ("./", basename (filename), ".syms", (char *) NULL);
+  if ((fd = open_existing_mapped_file (symsfilename, mtime, mapped)) < 0)
+    {
+      free (symsfilename);
+      symsfilename = concat (filename, ".syms", (char *) NULL);
+      fd = open_existing_mapped_file (symsfilename, mtime, mapped);
+    }
+
+  /* If we don't have an open file by now, then either the file does not
+     already exist, or the base file has changed since it was created.  In
+     either case, if the user has specified use of a mapped file, then
+     create a new mapped file, truncating any existing one.  If we can't
+     create one, print a system error message saying why we can't.
+
+     By default the file is rw for everyone, with the user's umask taking
+     care of turning off the permissions the user wants off. */
+
+  if ((fd < 0) && mapped)
+    {
+      free (symsfilename);
+      symsfilename = concat ("./", basename (filename), ".syms",
+			     (char *) NULL);
+      if ((fd = open (symsfilename, O_RDWR | O_CREAT | O_TRUNC, 0666)) < 0)
+	{
+	  if (error_pre_print)
+	    {
+	      printf_unfiltered (error_pre_print);
+	    }
+	  print_sys_errmsg (symsfilename, errno);
+	}
+    }
+
+  free (symsfilename);
+  return (fd);
+}
+
+static PTR
+map_to_file (fd)
+     int fd;
+{
+  PTR md;
+  CORE_ADDR mapto;
+
+  md = mmalloc_attach (fd, (PTR) 0);
+  if (md != NULL)
+    {
+      mapto = (CORE_ADDR) mmalloc_getkey (md, 1);
+      md = mmalloc_detach (md);
+      if (md != NULL)
+	{
+	  /* FIXME: should figure out why detach failed */
+	  md = NULL;
+	}
+      else if (mapto != (CORE_ADDR) NULL)
+	{
+	  /* This mapping file needs to be remapped at "mapto" */
+	  md = mmalloc_attach (fd, (PTR) mapto);
+	}
+      else
+	{
+	  /* This is a freshly created mapping file. */
+	  mapto = (CORE_ADDR) mmalloc_findbase (20 * 1024 * 1024);
+	  if (mapto != 0)
+	    {
+	      /* To avoid reusing the freshly created mapping file, at the 
+		 address selected by mmap, we must truncate it before trying
+		 to do an attach at the address we want. */
+	      ftruncate (fd, 0);
+	      md = mmalloc_attach (fd, (PTR) mapto);
+	      if (md != NULL)
+		{
+		  mmalloc_setkey (md, 1, (PTR) mapto);
+		}
+	    }
+	}
+    }
+  return (md);
+}
+
+#endif	/* defined(USE_MMALLOC) && defined(HAVE_MMAP) */
+
+/* Returns a section whose range includes PC and SECTION, 
+   or NULL if none found.  Note the distinction between the return type, 
+   struct obj_section (which is defined in gdb), and the input type
+   struct sec (which is a bfd-defined data type).  The obj_section
+   contains a pointer to the bfd struct sec section.  */
+
+struct obj_section *
+find_pc_sect_section (pc, section)
+     CORE_ADDR pc;
+     struct sec *section;
+{
+  struct obj_section *s;
+  struct objfile *objfile;
+  
+  ALL_OBJFILES (objfile)
+    for (s = objfile->sections; s < objfile->sections_end; ++s)
+#if defined(HPUXHPPA)
+      if ((section == 0 || section == s->the_bfd_section) && 
+	  s->addr <= pc && pc <= s->endaddr)
+#else
+      if ((section == 0 || section == s->the_bfd_section) && 
+	  s->addr <= pc && pc < s->endaddr)
+#endif
+	return(s);
+
+  return(NULL);
+}
+
+/* Returns a section whose range includes PC or NULL if none found. 
+   Backward compatibility, no section.  */
+
+struct obj_section *
+find_pc_section(pc)
+     CORE_ADDR pc;
+{
+  return find_pc_sect_section (pc, find_pc_mapped_section (pc));
+}
+  
+
+/* In SVR4, we recognize a trampoline by it's section name. 
+   That is, if the pc is in a section named ".plt" then we are in
+   a trampoline.  */
+
+int
+in_plt_section(pc, name)
+     CORE_ADDR pc;
+     char *name;
+{
+  struct obj_section *s;
+  int retval = 0;
+  
+  s = find_pc_section(pc);
+  
+  retval = (s != NULL
+	    && s->the_bfd_section->name != NULL
+	    && STREQ (s->the_bfd_section->name, ".plt"));
+  return(retval);
+}
diff --git a/gdb/objfiles.h b/gdb/objfiles.h
new file mode 100644
index 0000000..2a5df06
--- /dev/null
+++ b/gdb/objfiles.h
@@ -0,0 +1,572 @@
+/* Definitions for symbol file management in GDB.
+   Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (OBJFILES_H)
+#define OBJFILES_H
+
+/* This structure maintains information on a per-objfile basis about the
+   "entry point" of the objfile, and the scope within which the entry point
+   exists.  It is possible that gdb will see more than one objfile that is
+   executable, each with its own entry point.
+
+   For example, for dynamically linked executables in SVR4, the dynamic linker
+   code is contained within the shared C library, which is actually executable
+   and is run by the kernel first when an exec is done of a user executable
+   that is dynamically linked.  The dynamic linker within the shared C library
+   then maps in the various program segments in the user executable and jumps
+   to the user executable's recorded entry point, as if the call had been made
+   directly by the kernel.
+
+   The traditional gdb method of using this info is to use the recorded entry
+   point to set the variables entry_file_lowpc and entry_file_highpc from
+   the debugging information, where these values are the starting address
+   (inclusive) and ending address (exclusive) of the instruction space in the
+   executable which correspond to the "startup file", I.E. crt0.o in most
+   cases.  This file is assumed to be a startup file and frames with pc's
+   inside it are treated as nonexistent.  Setting these variables is necessary
+   so that backtraces do not fly off the bottom of the stack.
+
+   Gdb also supports an alternate method to avoid running off the bottom
+   of the stack.
+
+   There are two frames that are "special", the frame for the function
+   containing the process entry point, since it has no predecessor frame,
+   and the frame for the function containing the user code entry point
+   (the main() function), since all the predecessor frames are for the
+   process startup code.  Since we have no guarantee that the linked
+   in startup modules have any debugging information that gdb can use,
+   we need to avoid following frame pointers back into frames that might
+   have been built in the startup code, as we might get hopelessly 
+   confused.  However, we almost always have debugging information
+   available for main().
+
+   These variables are used to save the range of PC values which are valid
+   within the main() function and within the function containing the process
+   entry point.  If we always consider the frame for main() as the outermost
+   frame when debugging user code, and the frame for the process entry
+   point function as the outermost frame when debugging startup code, then
+   all we have to do is have FRAME_CHAIN_VALID return false whenever a
+   frame's current PC is within the range specified by these variables.
+   In essence, we set "ceilings" in the frame chain beyond which we will
+   not proceed when following the frame chain back up the stack.
+
+   A nice side effect is that we can still debug startup code without
+   running off the end of the frame chain, assuming that we have usable
+   debugging information in the startup modules, and if we choose to not
+   use the block at main, or can't find it for some reason, everything
+   still works as before.  And if we have no startup code debugging
+   information but we do have usable information for main(), backtraces
+   from user code don't go wandering off into the startup code.
+
+   To use this method, define your FRAME_CHAIN_VALID macro like:
+
+	#define FRAME_CHAIN_VALID(chain, thisframe)     \
+	  (chain != 0                                   \
+	   && !(inside_main_func ((thisframe)->pc))     \
+	   && !(inside_entry_func ((thisframe)->pc)))
+
+   and add initializations of the four scope controlling variables inside
+   the object file / debugging information processing modules.  */
+
+struct entry_info
+{
+  
+  /* The value we should use for this objects entry point.
+     The illegal/unknown value needs to be something other than 0, ~0
+     for instance, which is much less likely than 0. */
+
+  CORE_ADDR entry_point;
+
+#define INVALID_ENTRY_POINT (~0) /* ~0 will not be in any file, we hope.  */
+
+  /* Start (inclusive) and end (exclusive) of function containing the
+     entry point. */
+
+  CORE_ADDR entry_func_lowpc;
+  CORE_ADDR entry_func_highpc;
+
+  /* Start (inclusive) and end (exclusive) of object file containing the
+     entry point. */
+  
+  CORE_ADDR entry_file_lowpc;
+  CORE_ADDR entry_file_highpc;
+
+  /* Start (inclusive) and end (exclusive) of the user code main() function. */
+
+  CORE_ADDR main_func_lowpc;
+  CORE_ADDR main_func_highpc;
+
+/* Use these values when any of the above ranges is invalid.  */
+
+/* We use these values because it guarantees that there is no number that is
+   both >= LOWPC && < HIGHPC.  It is also highly unlikely that 3 is a valid
+   module or function start address (as opposed to 0).  */
+
+#define INVALID_ENTRY_LOWPC (3)
+#define INVALID_ENTRY_HIGHPC (1)
+
+};
+
+/* Sections in an objfile.
+
+   It is strange that we have both this notion of "sections"
+   and the one used by section_offsets.  Section as used
+   here, (currently at least) means a BFD section, and the sections
+   are set up from the BFD sections in allocate_objfile.
+
+   The sections in section_offsets have their meaning determined by
+   the symbol format, and they are set up by the sym_offsets function
+   for that symbol file format.
+
+   I'm not sure this could or should be changed, however.  */
+
+struct obj_section {
+  CORE_ADDR	addr;	 /* lowest address in section */
+  CORE_ADDR	endaddr; /* 1+highest address in section */
+
+  /* This field is being used for nefarious purposes by syms_from_objfile.
+     It is said to be redundant with section_offsets; it's not really being
+     used that way, however, it's some sort of hack I don't understand
+     and am not going to try to eliminate (yet, anyway).  FIXME.
+
+     It was documented as "offset between (end)addr and actual memory
+     addresses", but that's not true; addr & endaddr are actual memory
+     addresses.  */
+  CORE_ADDR offset;
+
+  sec_ptr the_bfd_section; /* BFD section pointer */
+
+  /* Objfile this section is part of.  */
+  struct objfile *objfile;
+
+  /* True if this "overlay section" is mapped into an "overlay region". */
+  int ovly_mapped;
+};
+
+/* An import entry contains information about a symbol that
+   is used in this objfile but not defined in it, and so needs
+   to be imported from some other objfile */
+/* Currently we just store the name; no attributes. 1997-08-05 */ 
+typedef char * ImportEntry;
+
+
+/* An export entry contains information about a symbol that
+   is defined in this objfile and available for use in other
+   objfiles */ 
+typedef struct {
+  char * name; /* name of exported symbol */ 
+  int address; /* offset subject to relocation */ 
+  /* Currently no other attributes 1997-08-05 */ 
+} ExportEntry;
+
+
+
+/* The "objstats" structure provides a place for gdb to record some
+   interesting information about its internal state at runtime, on a
+   per objfile basis, such as information about the number of symbols
+   read, size of string table (if any), etc. */
+
+#if MAINTENANCE_CMDS
+
+struct objstats {
+  int n_minsyms;	/* Number of minimal symbols read */
+  int n_psyms;		/* Number of partial symbols read */
+  int n_syms;		/* Number of full symbols read */
+  int n_stabs;		/* Number of ".stabs" read (if applicable) */
+  int n_types;		/* Number of types */
+  int sz_strtab;	/* Size of stringtable, (if applicable) */
+};
+
+#define OBJSTAT(objfile, expr) (objfile -> stats.expr)
+#define OBJSTATS struct objstats stats
+extern void print_objfile_statistics PARAMS ((void));
+extern void print_symbol_bcache_statistics PARAMS ((void));
+
+#else
+
+#define OBJSTAT(objfile, expr)	/* Nothing */
+#define OBJSTATS		/* Nothing */
+
+#endif	/* MAINTENANCE_CMDS */
+
+/* Master structure for keeping track of each file from which
+   gdb reads symbols.  There are several ways these get allocated: 1.
+   The main symbol file, symfile_objfile, set by the symbol-file command,
+   2.  Additional symbol files added by the add-symbol-file command,
+   3.  Shared library objfiles, added by ADD_SOLIB,  4.  symbol files
+   for modules that were loaded when GDB attached to a remote system
+   (see remote-vx.c).  */
+
+struct objfile
+{
+
+  /* All struct objfile's are chained together by their next pointers.
+     The global variable "object_files" points to the first link in this
+     chain.
+
+     FIXME:  There is a problem here if the objfile is reusable, and if
+     multiple users are to be supported.  The problem is that the objfile
+     list is linked through a member of the objfile struct itself, which
+     is only valid for one gdb process.  The list implementation needs to
+     be changed to something like:
+
+     struct list {struct list *next; struct objfile *objfile};
+
+     where the list structure is completely maintained separately within
+     each gdb process. */
+
+  struct objfile *next;
+
+  /* The object file's name.  Malloc'd; free it if you free this struct.  */
+
+  char *name;
+
+  /* TRUE if this objfile was created because the user explicitly caused
+     it (e.g., used the add-symbol-file command).
+     */
+  int  user_loaded;
+
+  /* TRUE if this objfile was explicitly created to represent a solib.
+
+     (If FALSE, the objfile may actually be a solib.  This can happen if
+     the user created the objfile by using the add-symbol-file command.
+     GDB doesn't in that situation actually check whether the file is a
+     solib.  Rather, the target's implementation of the solib interface
+     is responsible for setting this flag when noticing solibs used by
+     an inferior.)
+     */
+  int  is_solib;
+
+  /* Some flag bits for this objfile. */
+
+  unsigned short flags;
+
+  /* Each objfile points to a linked list of symtabs derived from this file,
+     one symtab structure for each compilation unit (source file).  Each link
+     in the symtab list contains a backpointer to this objfile. */
+
+  struct symtab *symtabs;
+
+  /* Each objfile points to a linked list of partial symtabs derived from
+     this file, one partial symtab structure for each compilation unit
+     (source file). */
+
+  struct partial_symtab *psymtabs;
+
+  /* List of freed partial symtabs, available for re-use */
+
+  struct partial_symtab *free_psymtabs;
+
+  /* The object file's BFD.  Can be null if the objfile contains only
+     minimal symbols, e.g. the run time common symbols for SunOS4.  */
+
+  bfd *obfd;
+
+  /* The modification timestamp of the object file, as of the last time
+     we read its symbols.  */
+
+  long mtime;
+
+  /* Obstacks to hold objects that should be freed when we load a new symbol
+     table from this object file. */
+
+  struct obstack psymbol_obstack;	/* Partial symbols */
+  struct obstack symbol_obstack;	/* Full symbols */
+  struct obstack type_obstack;		/* Types */
+
+  /* A byte cache where we can stash arbitrary "chunks" of bytes that
+     will not change. */
+
+  struct bcache psymbol_cache;		/* Byte cache for partial syms */
+
+  /* Vectors of all partial symbols read in from file.  The actual data
+     is stored in the psymbol_obstack. */
+
+  struct psymbol_allocation_list global_psymbols;
+  struct psymbol_allocation_list static_psymbols;
+
+  /* Each file contains a pointer to an array of minimal symbols for all
+     global symbols that are defined within the file.  The array is terminated
+     by a "null symbol", one that has a NULL pointer for the name and a zero
+     value for the address.  This makes it easy to walk through the array
+     when passed a pointer to somewhere in the middle of it.  There is also
+     a count of the number of symbols, which does not include the terminating
+     null symbol.  The array itself, as well as all the data that it points
+     to, should be allocated on the symbol_obstack for this file. */
+
+  struct minimal_symbol *msymbols;
+  int minimal_symbol_count;
+
+  /* For object file formats which don't specify fundamental types, gdb
+     can create such types.  For now, it maintains a vector of pointers
+     to these internally created fundamental types on a per objfile basis,
+     however it really should ultimately keep them on a per-compilation-unit
+     basis, to account for linkage-units that consist of a number of
+     compilation units that may have different fundamental types, such as
+     linking C modules with ADA modules, or linking C modules that are
+     compiled with 32-bit ints with C modules that are compiled with 64-bit
+     ints (not inherently evil with a smarter linker). */
+
+  struct type **fundamental_types;
+
+  /* The mmalloc() malloc-descriptor for this objfile if we are using
+     the memory mapped malloc() package to manage storage for this objfile's
+     data.  NULL if we are not. */
+
+  PTR md;
+
+  /* The file descriptor that was used to obtain the mmalloc descriptor
+     for this objfile.  If we call mmalloc_detach with the malloc descriptor
+     we should then close this file descriptor. */
+
+  int mmfd;
+
+  /* Structure which keeps track of functions that manipulate objfile's
+     of the same type as this objfile.  I.E. the function to read partial
+     symbols for example.  Note that this structure is in statically
+     allocated memory, and is shared by all objfiles that use the
+     object module reader of this type. */
+
+  struct sym_fns *sf;
+
+  /* The per-objfile information about the entry point, the scope (file/func)
+     containing the entry point, and the scope of the user's main() func. */
+
+  struct entry_info ei;
+
+  /* Information about stabs.  Will be filled in with a dbx_symfile_info
+     struct by those readers that need it. */
+
+  struct dbx_symfile_info *sym_stab_info;
+
+  /* Hook for information for use by the symbol reader (currently used
+     for information shared by sym_init and sym_read).  It is
+     typically a pointer to malloc'd memory.  The symbol reader's finish
+     function is responsible for freeing the memory thusly allocated.  */
+
+  PTR sym_private;
+
+  /* Hook for target-architecture-specific information.  This must
+     point to memory allocated on one of the obstacks in this objfile,
+     so that it gets freed automatically when reading a new object
+     file. */
+
+  PTR obj_private;
+
+  /* Set of relocation offsets to apply to each section.
+     Currently on the psymbol_obstack (which makes no sense, but I'm
+     not sure it's harming anything).
+
+     These offsets indicate that all symbols (including partial and
+     minimal symbols) which have been read have been relocated by this
+     much.  Symbols which are yet to be read need to be relocated by
+     it.  */
+
+  struct section_offsets *section_offsets;
+  int num_sections;
+
+  /* set of section begin and end addresses used to map pc addresses
+     into sections.  Currently on the psymbol_obstack (which makes no
+     sense, but I'm not sure it's harming anything).  */
+
+  struct obj_section
+    *sections,
+    *sections_end;
+
+  /* two auxiliary fields, used to hold the fp of separate symbol files */
+  FILE *auxf1, *auxf2;
+
+  /* Imported symbols */
+  ImportEntry * import_list;
+  int import_list_size;
+
+  /* Exported symbols */
+  ExportEntry * export_list;
+  int export_list_size;
+
+  /* Place to stash various statistics about this objfile */
+  OBJSTATS;
+};
+
+/* Defines for the objfile flag word. */
+
+/* Gdb can arrange to allocate storage for all objects related to a
+   particular objfile in a designated section of its address space,
+   managed at a low level by mmap() and using a special version of
+   malloc that handles malloc/free/realloc on top of the mmap() interface.
+   This allows the "internal gdb state" for a particular objfile to be
+   dumped to a gdb state file and subsequently reloaded at a later time. */
+
+#define OBJF_MAPPED	(1 << 0)	/* Objfile data is mmap'd */
+
+/* When using mapped/remapped predigested gdb symbol information, we need
+   a flag that indicates that we have previously done an initial symbol
+   table read from this particular objfile.  We can't just look for the
+   absence of any of the three symbol tables (msymbols, psymtab, symtab)
+   because if the file has no symbols for example, none of these will
+   exist. */
+
+#define OBJF_SYMS	(1 << 1)	/* Have tried to read symbols */
+
+/* When an object file has its functions reordered (currently Irix-5.2
+   shared libraries exhibit this behaviour), we will need an expensive
+   algorithm to locate a partial symtab or symtab via an address.
+   To avoid this penalty for normal object files, we use this flag,
+   whose setting is determined upon symbol table read in.  */
+
+#define OBJF_REORDERED	(1 << 2)	/* Functions are reordered */
+                       
+/* Distinguish between an objfile for a shared library and a
+   "vanilla" objfile. */
+
+#define OBJF_SHARED     (1 << 3)        /* From a shared library */
+
+/* The object file that the main symbol table was loaded from (e.g. the
+   argument to the "symbol-file" or "file" command).  */
+
+extern struct objfile *symfile_objfile;
+
+/* The object file that contains the runtime common minimal symbols
+   for SunOS4. Note that this objfile has no associated BFD.  */
+
+extern struct objfile *rt_common_objfile;
+
+/* When we need to allocate a new type, we need to know which type_obstack
+   to allocate the type on, since there is one for each objfile.  The places
+   where types are allocated are deeply buried in function call hierarchies
+   which know nothing about objfiles, so rather than trying to pass a
+   particular objfile down to them, we just do an end run around them and
+   set current_objfile to be whatever objfile we expect to be using at the
+   time types are being allocated.  For instance, when we start reading
+   symbols for a particular objfile, we set current_objfile to point to that
+   objfile, and when we are done, we set it back to NULL, to ensure that we
+   never put a type someplace other than where we are expecting to put it.
+   FIXME:  Maybe we should review the entire type handling system and
+   see if there is a better way to avoid this problem. */
+
+extern struct objfile *current_objfile;
+
+/* All known objfiles are kept in a linked list.  This points to the
+   root of this list. */
+
+extern struct objfile *object_files;
+
+/* Declarations for functions defined in objfiles.c */
+
+extern struct objfile *
+allocate_objfile PARAMS ((bfd *, int, int, int));
+
+extern int
+build_objfile_section_table PARAMS ((struct objfile *));
+
+extern void objfile_to_front PARAMS ((struct objfile *));
+
+extern void
+unlink_objfile PARAMS ((struct objfile *));
+
+extern void
+free_objfile PARAMS ((struct objfile *));
+
+extern void
+free_all_objfiles PARAMS ((void));
+
+extern void
+objfile_relocate PARAMS ((struct objfile *, struct section_offsets *));
+
+extern int
+have_partial_symbols PARAMS ((void));
+
+extern int
+have_full_symbols PARAMS ((void));
+
+/* This operation deletes all objfile entries that represent solibs that
+   weren't explicitly loaded by the user, via e.g., the add-symbol-file
+   command.
+   */
+extern void
+objfile_purge_solibs PARAMS ((void));
+
+/* Functions for dealing with the minimal symbol table, really a misc
+   address<->symbol mapping for things we don't have debug symbols for.  */
+
+extern int
+have_minimal_symbols PARAMS ((void));
+
+extern struct obj_section *
+find_pc_section PARAMS((CORE_ADDR pc));
+
+extern struct obj_section *
+find_pc_sect_section PARAMS((CORE_ADDR pc, asection *section));
+
+extern int
+in_plt_section PARAMS ((CORE_ADDR, char *));
+
+/* Traverse all object files.  ALL_OBJFILES_SAFE works even if you delete
+   the objfile during the traversal.  */
+
+#define	ALL_OBJFILES(obj) \
+  for ((obj) = object_files; (obj) != NULL; (obj) = (obj)->next)
+
+#define	ALL_OBJFILES_SAFE(obj,nxt) \
+  for ((obj) = object_files; 	   \
+       (obj) != NULL? ((nxt)=(obj)->next,1) :0;	\
+       (obj) = (nxt))
+
+/* Traverse all symtabs in one objfile.  */
+
+#define	ALL_OBJFILE_SYMTABS(objfile, s) \
+    for ((s) = (objfile) -> symtabs; (s) != NULL; (s) = (s) -> next)
+
+/* Traverse all psymtabs in one objfile.  */
+
+#define	ALL_OBJFILE_PSYMTABS(objfile, p) \
+    for ((p) = (objfile) -> psymtabs; (p) != NULL; (p) = (p) -> next)
+
+/* Traverse all minimal symbols in one objfile.  */
+
+#define	ALL_OBJFILE_MSYMBOLS(objfile, m) \
+    for ((m) = (objfile) -> msymbols; SYMBOL_NAME(m) != NULL; (m)++)
+
+/* Traverse all symtabs in all objfiles.  */
+
+#define	ALL_SYMTABS(objfile, s) \
+  ALL_OBJFILES (objfile)	 \
+    ALL_OBJFILE_SYMTABS (objfile, s)
+
+/* Traverse all psymtabs in all objfiles.  */
+
+#define	ALL_PSYMTABS(objfile, p) \
+  ALL_OBJFILES (objfile)	 \
+    ALL_OBJFILE_PSYMTABS (objfile, p)
+
+/* Traverse all minimal symbols in all objfiles.  */
+
+#define	ALL_MSYMBOLS(objfile, m) \
+  ALL_OBJFILES (objfile)	 \
+    if ((objfile)->msymbols)	 \
+      ALL_OBJFILE_MSYMBOLS (objfile, m)
+
+#define ALL_OBJFILE_OSECTIONS(objfile, osect)	\
+  for (osect = objfile->sections; osect < objfile->sections_end; osect++)
+
+#define ALL_OBJSECTIONS(objfile, osect)		\
+  ALL_OBJFILES (objfile)			\
+    ALL_OBJFILE_OSECTIONS (objfile, osect)
+
+#endif	/* !defined (OBJFILES_H) */
diff --git a/gdb/ocd.c b/gdb/ocd.c
new file mode 100644
index 0000000..343fa62
--- /dev/null
+++ b/gdb/ocd.c
@@ -0,0 +1,1444 @@
+/* Target communications support for Macraigor Systems' On-Chip Debugging
+   Copyright 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "dcache.h"
+#include <sys/types.h>
+#include <signal.h>
+#include "serial.h"
+#include "ocd.h"
+
+/* Prototypes for local functions */
+
+static int ocd_read_bytes PARAMS ((CORE_ADDR memaddr,
+				      char *myaddr, int len));
+
+static int ocd_start_remote PARAMS ((PTR dummy));
+
+static int readchar PARAMS ((int timeout));
+
+static void reset_packet PARAMS ((void));
+
+static void output_packet PARAMS ((void));
+
+static int get_quoted_char PARAMS ((int timeout));
+
+static void put_quoted_char PARAMS ((int c));
+
+static void ocd_interrupt PARAMS ((int signo));
+
+static void ocd_interrupt_twice PARAMS ((int signo));
+
+static void interrupt_query PARAMS ((void));
+
+static unsigned char * ocd_do_command PARAMS ((int cmd, int *statusp, int *lenp));
+
+static void ocd_put_packet PARAMS ((unsigned char *packet, int pktlen));
+
+static unsigned char * ocd_get_packet PARAMS ((int cmd, int *pktlen, int timeout));
+
+static struct target_ops *current_ops = NULL;
+
+static int last_run_status;
+
+/* This was 5 seconds, which is a long time to sit and wait.
+   Unless this is going though some terminal server or multiplexer or
+   other form of hairy serial connection, I would think 2 seconds would
+   be plenty.  */
+
+#if 0
+/* FIXME: Change to allow option to set timeout value on a per target
+   basis. */
+static int remote_timeout = 2;
+#endif
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so that
+   ocd_open knows that we don't have a file open when the program
+   starts.  */
+static serial_t ocd_desc = NULL;
+
+void
+ocd_error (s, error_code)
+     char *s;
+     int error_code;
+{
+  char buf[100];
+
+  fputs_filtered (s, gdb_stderr);
+  fputs_filtered (" ", gdb_stderr);
+
+  switch (error_code)
+    {
+    case 0x1: s = "Unknown fault"; break;
+    case 0x2: s = "Power failed"; break;
+    case 0x3: s = "Cable disconnected"; break;
+    case 0x4: s = "Couldn't enter OCD mode"; break;
+    case 0x5: s = "Target stuck in reset"; break;
+    case 0x6: s = "OCD hasn't been initialized"; break;
+    case 0x7: s = "Write verify failed"; break;
+    case 0x8: s = "Reg buff error (during MPC5xx fp reg read/write)"; break;
+    case 0x9: s = "Invalid CPU register access attempt failed"; break;
+    case 0x11: s = "Bus error"; break;
+    case 0x12: s = "Checksum error"; break;
+    case 0x13: s = "Illegal command"; break;
+    case 0x14: s = "Parameter error"; break;
+    case 0x15: s = "Internal error"; break;
+    case 0x80: s = "Flash erase error"; break;
+    default:
+      sprintf (buf, "Unknown error code %d", error_code);
+      s = buf;
+    }
+
+  error (s);
+}
+
+/*  Return nonzero if the thread TH is still alive on the remote system.  */
+
+int
+ocd_thread_alive (th)
+     int th;
+{
+  return 1;
+}
+
+/* Clean up connection to a remote debugger.  */
+
+/* ARGSUSED */
+void
+ocd_close (quitting)
+     int quitting;
+{
+  if (ocd_desc)
+    SERIAL_CLOSE (ocd_desc);
+  ocd_desc = NULL;
+}
+
+/* Stub for catch_errors.  */
+
+static int
+ocd_start_remote (dummy)
+     PTR dummy;
+{
+  unsigned char buf[10], *p;
+  int pktlen;
+  int status;
+  int error_code;
+  int speed;
+  enum ocd_target_type target_type;
+
+  target_type = *(enum ocd_target_type*)dummy;
+
+  immediate_quit = 1;		/* Allow user to interrupt it */
+
+  SERIAL_SEND_BREAK (ocd_desc); /* Wake up the wiggler */
+
+  speed = 80;			/* Divide clock by 4000 */
+
+  buf[0] = OCD_INIT;
+  buf[1] = speed >> 8;
+  buf[2] = speed & 0xff;
+  buf[3] = target_type;
+  ocd_put_packet (buf, 4);	/* Init OCD params */
+  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+
+  if (pktlen < 2)
+    error ("Truncated response packet from OCD device");
+
+  status = p[1];
+  error_code = p[2];
+
+  if (error_code != 0)
+    ocd_error ("OCD_INIT:", error_code);
+
+  ocd_do_command (OCD_AYT, &status, &pktlen);
+
+  p = ocd_do_command (OCD_GET_VERSION, &status, &pktlen);
+
+  printf_unfiltered ("[Wiggler version %x.%x, capability 0x%x]\n",
+		     p[0], p[1], (p[2] << 16) | p[3]);
+
+#if 0
+  /* Reset the target */
+
+  ocd_do_command (OCD_RESET_RUN, &status, &pktlen);
+/*  ocd_do_command (OCD_RESET, &status, &pktlen);*/
+#endif
+
+  /* If processor is still running, stop it.  */
+
+  if (!(status & OCD_FLAG_BDM))
+    ocd_stop ();
+
+#if 1
+  /* When using a target box, we want to asynchronously return status when
+     target stops.  The OCD_SET_CTL_FLAGS command is ignored by Wigglers.dll
+     when using a parallel Wiggler */
+  buf[0] = OCD_SET_CTL_FLAGS;
+  buf[1] = 0;
+  buf[2] = 1;
+  ocd_put_packet (buf, 3);
+
+  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+
+  if (pktlen < 2)
+    error ("Truncated response packet from OCD device");
+
+  status = p[1];
+  error_code = p[2];
+
+  if (error_code != 0)
+    ocd_error ("OCD_SET_CTL_FLAGS:", error_code);
+#endif
+
+  immediate_quit = 0;
+
+/* This is really the job of start_remote however, that makes an assumption
+   that the target is about to print out a status message of some sort.  That
+   doesn't happen here (in fact, it may not be possible to get the monitor to
+   send the appropriate packet).  */
+
+  flush_cached_frames ();
+  registers_changed ();
+  stop_pc = read_pc ();
+  set_current_frame (create_new_frame (read_fp (), stop_pc));
+  select_frame (get_current_frame (), 0);
+  print_stack_frame (selected_frame, -1, 1);
+
+  buf[0] = OCD_LOG_FILE;
+  buf[1] = 3;   /* close existing WIGGLERS.LOG */
+  ocd_put_packet (buf, 2);
+  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+
+  buf[0] = OCD_LOG_FILE;
+  buf[1] = 2;   /* append to existing WIGGLERS.LOG */
+  ocd_put_packet (buf, 2);
+  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+
+  return 1;
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static DCACHE *ocd_dcache;
+
+void
+ocd_open (name, from_tty, target_type, ops)
+     char *name;
+     int from_tty;
+     enum ocd_target_type target_type;
+     struct target_ops *ops;
+{
+  unsigned char buf[10], *p;
+  int status;
+  int pktlen;
+
+  if (name == 0)
+    error ("To open an OCD connection, you need to specify the\n\
+device the OCD device is attached to (e.g. /dev/ttya).");
+
+  target_preopen (from_tty);
+
+  current_ops = ops;
+
+  unpush_target (current_ops);
+
+  ocd_dcache = dcache_init (ocd_read_bytes, ocd_write_bytes);
+
+  if (strncmp(name,"wiggler",7) == 0)
+      {
+	  ocd_desc = SERIAL_OPEN ("ocd");
+          if (!ocd_desc)
+            perror_with_name (name);
+
+	  buf[0] = OCD_LOG_FILE;
+	  buf[1] = 1;	/* open new or overwrite existing WIGGLERS.LOG */
+	  ocd_put_packet (buf, 2);
+	  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+
+	  buf[0] = OCD_SET_CONNECTION;
+	  buf[1] = 0x01;	/* atoi (name[11]); */
+	  ocd_put_packet (buf, 2);
+	  p = ocd_get_packet (buf[0], &pktlen, remote_timeout);
+      }
+  else	/* not using Wigglers.dll */
+      {
+          ocd_desc = SERIAL_OPEN (name);
+	  if (!ocd_desc)
+	      perror_with_name (name);
+      }
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (ocd_desc, baud_rate))
+	{
+	  SERIAL_CLOSE (ocd_desc);
+	  perror_with_name (name);
+	}
+    }
+
+  SERIAL_RAW (ocd_desc);
+
+  /* If there is something sitting in the buffer we might take it as a
+     response to a command, which would be bad.  */
+  SERIAL_FLUSH_INPUT (ocd_desc);
+
+  if (from_tty)
+    {
+      puts_filtered ("Remote target wiggler connected to ");
+      puts_filtered (name);
+      puts_filtered ("\n");
+    }
+  push_target (current_ops);	/* Switch to using remote target now */
+
+  /* Without this, some commands which require an active target (such as kill)
+     won't work.  This variable serves (at least) double duty as both the pid
+     of the target process (if it has such), and as a flag indicating that a
+     target is active.  These functions should be split out into seperate
+     variables, especially since GDB will someday have a notion of debugging
+     several processes.  */
+
+  inferior_pid = 42000;
+  /* Start the remote connection; if error (0), discard this target.
+     In particular, if the user quits, be sure to discard it
+     (we'd be in an inconsistent state otherwise).  */
+  if (!catch_errors (ocd_start_remote, &target_type,
+		     "Couldn't establish connection to remote target\n",
+		     RETURN_MASK_ALL))
+    {
+      pop_target();
+      error ("Failed to connect to OCD.");
+    }
+}
+
+/* This takes a program previously attached to and detaches it.  After
+   this is done, GDB can be used to debug some other program.  We
+   better not have left any breakpoints in the target program or it'll
+   die when it hits one.  */
+
+void
+ocd_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    error ("Argument given to \"detach\" when remotely debugging.");
+
+  pop_target ();
+  if (from_tty)
+    puts_filtered ("Ending remote debugging.\n");
+}
+
+/* Tell the remote machine to resume.  */
+
+void
+ocd_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  int pktlen;
+
+  dcache_flush (ocd_dcache);
+
+  if (step)
+    ocd_do_command (OCD_STEP, &last_run_status, &pktlen);
+  else
+    ocd_do_command (OCD_RUN, &last_run_status, &pktlen);
+}
+
+void
+ocd_stop ()
+{
+  int status;
+  int pktlen;
+
+  ocd_do_command (OCD_STOP, &status, &pktlen);
+
+  if (!(status & OCD_FLAG_BDM))
+    error ("Can't stop target via BDM");
+}
+
+static volatile int ocd_interrupt_flag;
+
+/* Send ^C to target to halt it.  Target will respond, and send us a
+   packet.  */
+
+static void
+ocd_interrupt (signo)
+     int signo;
+{
+  /* If this doesn't work, try more severe steps.  */
+  signal (signo, ocd_interrupt_twice);
+  
+  if (remote_debug)
+    printf_unfiltered ("ocd_interrupt called\n");
+
+  {
+    char buf[1];
+
+    ocd_stop ();
+    buf[0] = OCD_AYT;
+    ocd_put_packet (buf, 1);
+    ocd_interrupt_flag = 1;
+  }
+}
+
+static void (*ofunc)();
+
+/* The user typed ^C twice.  */
+static void
+ocd_interrupt_twice (signo)
+     int signo;
+{
+  signal (signo, ofunc);
+  
+  interrupt_query ();
+
+  signal (signo, ocd_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received.  */
+
+static void
+interrupt_query ()
+{
+  target_terminal_ours ();
+
+  if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+    {
+      target_mourn_inferior ();
+      return_to_top_level (RETURN_QUIT);
+    }
+
+  target_terminal_inferior ();
+}
+
+/* If nonzero, ignore the next kill.  */
+static int kill_kludge;
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.
+   Returns "pid" (though it's not clear what, if anything, that
+   means in the case of this target).  */
+
+int
+ocd_wait ()
+{
+  unsigned char *p;
+  int error_code;
+  int pktlen;
+  char buf[1];
+
+  ocd_interrupt_flag = 0;
+
+  /* Target might already be stopped by the time we get here. */
+  /* If we aren't already stopped, we need to loop until we've dropped
+     back into BDM mode */
+
+  while (!(last_run_status & OCD_FLAG_BDM))
+    {
+      buf[0] = OCD_AYT;
+      ocd_put_packet (buf, 1);
+      p = ocd_get_packet (OCD_AYT, &pktlen, -1);
+
+      ofunc = (void (*)()) signal (SIGINT, ocd_interrupt);
+      signal (SIGINT, ofunc);
+
+      if (pktlen < 2)
+	error ("Truncated response packet from OCD device");
+
+      last_run_status = p[1];
+      error_code = p[2];
+
+      if (error_code != 0)
+	ocd_error ("target_wait:", error_code);
+
+      if (last_run_status & OCD_FLAG_PWF)
+	error ("OCD device lost VCC at BDM interface.");
+      else if (last_run_status & OCD_FLAG_CABLE_DISC)
+	error ("OCD device cable appears to have been disconnected.");
+    }
+
+  if (ocd_interrupt_flag)
+    return 1;
+  else
+    return 0;
+}
+
+/* Read registers from the OCD device.  Specify the starting and ending
+   register number.  Return the number of regs actually read in *NUMREGS.
+   Returns a pointer to a static array containing the register contents.  */
+
+unsigned char *
+ocd_read_bdm_registers (first_bdm_regno, last_bdm_regno, reglen)
+     int first_bdm_regno;
+     int last_bdm_regno;
+     int *reglen;
+{
+  unsigned char buf[10];
+  int i;
+  unsigned char *p;
+  unsigned char *regs;
+  int error_code, status;
+  int pktlen;
+
+  buf[0] = OCD_READ_REGS;
+  buf[1] = first_bdm_regno >> 8;
+  buf[2] = first_bdm_regno & 0xff;
+  buf[3] = last_bdm_regno >> 8;
+  buf[4] = last_bdm_regno & 0xff;
+
+  ocd_put_packet (buf, 5);
+  p = ocd_get_packet (OCD_READ_REGS, &pktlen, remote_timeout);
+
+  status = p[1];
+  error_code = p[2];
+
+  if (error_code != 0)
+    ocd_error ("read_bdm_registers:", error_code);
+
+  i = p[3];
+  if (i == 0)
+    i = 256;
+
+  if (i > pktlen - 4
+      || ((i & 3) != 0))
+    error ("Register block size bad:  %d", i);
+
+  *reglen = i;
+
+  regs = p + 4;
+
+  return regs;
+}
+
+/* Read register BDM_REGNO and returns its value ala read_register() */
+
+CORE_ADDR
+ocd_read_bdm_register (bdm_regno)
+     int bdm_regno;
+{
+  int reglen;
+  unsigned char *p;
+  CORE_ADDR regval;
+
+  p = ocd_read_bdm_registers (bdm_regno, bdm_regno, &reglen);
+  regval = extract_unsigned_integer (p, reglen);
+
+  return regval;
+}
+
+void
+ocd_write_bdm_registers (first_bdm_regno, regptr, reglen)
+     int first_bdm_regno;
+     unsigned char *regptr;
+     int reglen;
+{
+  unsigned char *buf;
+  unsigned char *p;
+  int error_code, status;
+  int pktlen;
+
+  buf = alloca (4 + reglen);
+
+  buf[0] = OCD_WRITE_REGS;
+  buf[1] = first_bdm_regno >> 8;
+  buf[2] = first_bdm_regno & 0xff;
+  buf[3] = reglen;
+  memcpy (buf + 4, regptr, reglen);
+
+  ocd_put_packet (buf, 4 + reglen);
+  p = ocd_get_packet (OCD_WRITE_REGS, &pktlen, remote_timeout);
+
+  if (pktlen < 3)
+    error ("Truncated response packet from OCD device");
+
+  status = p[1];
+  error_code = p[2];
+
+  if (error_code != 0)
+    ocd_error ("ocd_write_bdm_registers:", error_code);
+}
+
+void
+ocd_write_bdm_register (bdm_regno, reg)
+     int bdm_regno;
+     CORE_ADDR reg;
+{
+  unsigned char buf[4];
+
+  store_unsigned_integer (buf, 4, reg);
+
+  ocd_write_bdm_registers (bdm_regno, buf, 4);
+}
+
+void 
+ocd_prepare_to_store ()
+{
+}
+
+/* Write memory data directly to the remote machine.
+   This does not inform the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int write_mem_command = OCD_WRITE_MEM;
+
+int
+ocd_write_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  char buf[256 + 10];
+  unsigned char *p;
+  int origlen;
+
+  origlen = len;
+
+  buf[0] = write_mem_command;
+  buf[5] = 1;			/* Write as bytes */
+  buf[6] = 0;			/* Don't verify */
+
+  while (len > 0)
+    {
+      int numbytes;
+      int pktlen;
+      int status, error_code;
+
+      numbytes = min (len, 256 - 8);
+
+      buf[1] = memaddr >> 24;
+      buf[2] = memaddr >> 16;
+      buf[3] = memaddr >> 8;
+      buf[4] = memaddr;
+
+      buf[7] = numbytes;
+
+      memcpy (&buf[8], myaddr, numbytes);
+      ocd_put_packet (buf, 8 + numbytes);
+      p = ocd_get_packet (OCD_WRITE_MEM, &pktlen, remote_timeout);
+      if (pktlen < 3)
+	error ("Truncated response packet from OCD device");
+
+      status = p[1];
+      error_code = p[2];
+
+      if (error_code == 0x11)	/* Got a bus error? */
+	{
+	  CORE_ADDR error_address;
+
+	  error_address = p[3] << 24;
+	  error_address |= p[4] << 16;
+	  error_address |= p[5] << 8;
+	  error_address |= p[6];
+	  numbytes = error_address - memaddr;
+
+	  len -= numbytes;
+
+	  errno = EIO;
+
+	  break;
+	}
+      else if (error_code != 0)
+	ocd_error ("ocd_write_bytes:", error_code);
+
+      len -= numbytes;
+      memaddr += numbytes;
+      myaddr += numbytes;
+    }
+
+  return origlen - len;
+}
+
+/* Read memory data directly from the remote machine.
+   This does not use the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int
+ocd_read_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  char buf[256 + 10];
+  unsigned char *p;
+  int origlen;
+
+  origlen = len;
+
+  buf[0] = OCD_READ_MEM;
+  buf[5] = 1;			/* Read as bytes */
+
+  while (len > 0)
+    {
+      int numbytes;
+      int pktlen;
+      int status, error_code;
+
+      numbytes = min (len, 256 - 7);
+
+      buf[1] = memaddr >> 24;
+      buf[2] = memaddr >> 16;
+      buf[3] = memaddr >> 8;
+      buf[4] = memaddr;
+
+      buf[6] = numbytes;
+
+      ocd_put_packet (buf, 7);
+      p = ocd_get_packet (OCD_READ_MEM, &pktlen, remote_timeout);
+      if (pktlen < 4)
+	error ("Truncated response packet from OCD device");
+
+      status = p[1];
+      error_code = p[2];
+
+      if (error_code == 0x11)	/* Got a bus error? */
+	{
+	  CORE_ADDR error_address;
+
+	  error_address = p[3] << 24;
+	  error_address |= p[4] << 16;
+	  error_address |= p[5] << 8;
+	  error_address |= p[6];
+	  numbytes = error_address - memaddr;
+
+	  len -= numbytes;
+
+	  errno = EIO;
+
+	  break;
+	}
+      else if (error_code != 0)
+	ocd_error ("ocd_read_bytes:", error_code);
+
+      memcpy (myaddr, &p[4], numbytes);
+
+      len -= numbytes;
+      memaddr += numbytes;
+      myaddr += numbytes;
+    }
+
+  return origlen - len;
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
+   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is
+   nonzero.  Returns length of data written or read; 0 for error.  */
+
+/* ARGSUSED */
+int
+ocd_xfer_memory (memaddr, myaddr, len, should_write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+     struct target_ops *target;			/* ignored */
+{
+  return dcache_xfer_memory (ocd_dcache, memaddr, myaddr, len, should_write);
+}
+
+void
+ocd_files_info (ignore)
+     struct target_ops *ignore;
+{
+  puts_filtered ("Debugging a target over a serial line.\n");
+}
+
+/* Stuff for dealing with the packets which are part of this protocol.
+   See comment at top of file for details.  */
+
+/* Read a single character from the remote side, handling wierd errors. */
+
+static int
+readchar (timeout)
+     int timeout;
+{
+  int ch;
+
+  ch = SERIAL_READCHAR (ocd_desc, timeout);
+
+  switch (ch)
+    {
+    case SERIAL_EOF:
+      error ("Remote connection closed");
+    case SERIAL_ERROR:
+      perror_with_name ("Remote communication error");
+    case SERIAL_TIMEOUT:
+    default:
+      return ch;
+    }
+}
+
+#if 0
+/* Read a character from the data stream, dequoting as necessary.  SYN is
+   treated special.  Any SYNs appearing in the data stream are returned as the
+   distinct value RAW_SYN (which has a value > 8 bits and therefore cannot be
+   mistaken for real data).  */
+
+static int
+get_quoted_char (timeout)
+     int timeout;
+{
+  int ch;
+
+  ch = readchar (timeout);
+
+  switch (ch)
+    {
+    case SERIAL_TIMEOUT:
+      error ("Timeout in mid-packet, aborting");
+    case SYN:
+      return RAW_SYN;
+    case DLE:
+      ch = readchar (timeout);
+      if (ch == SYN)
+	return RAW_SYN;
+      return ch & ~0100;
+    default:
+      return ch;
+    }
+}
+
+static unsigned char pkt[256 * 2 + 10], *pktp; /* Worst case */
+
+static void
+reset_packet ()
+{
+  pktp = pkt;
+}
+
+static void
+output_packet ()
+{
+  if (SERIAL_WRITE (ocd_desc, pkt, pktp - pkt))
+    perror_with_name ("output_packet: write failed");
+
+  reset_packet ();
+}
+
+/* Output a quoted character.  SYNs and DLEs are quoted.  Everything else goes
+   through untouched.  */
+
+static void
+put_quoted_char (c)
+     int c;
+{
+  switch (c)
+    {
+    case SYN:
+    case DLE:
+      *pktp++ = DLE;
+      c |= 0100;
+    }
+
+  *pktp++ = c;
+}
+
+/* Send a packet to the OCD device.  The packet framed by a SYN character,
+   a byte count and a checksum.  The byte count only counts the number of
+   bytes between the count and the checksum.  A count of zero actually
+   means 256.  Any SYNs within the packet (including the checksum and
+   count) must be quoted.  The quote character must be quoted as well.
+   Quoting is done by replacing the character with the two-character sequence
+   DLE, {char} | 0100.  Note that the quoting mechanism has no effect on the
+   byte count. */
+
+static void
+stu_put_packet (buf, len)
+     unsigned char *buf;
+     int len;
+{
+  unsigned char checksum;
+  unsigned char c;
+
+  if (len == 0 || len > 256)
+    abort ();			/* Can't represent 0 length packet */
+
+  reset_packet ();
+
+  checksum = 0;
+
+  put_quoted_char (RAW_SYN);
+
+  c = len;
+
+  do
+    {
+      checksum += c;
+
+      put_quoted_char (c);
+
+      c = *buf++;
+    }
+  while (len-- > 0);
+
+  put_quoted_char (-checksum & 0xff);
+
+  output_packet ();
+}
+
+#else
+
+/* Send a packet to the OCD device.  The packet framed by a SYN character,
+   a byte count and a checksum.  The byte count only counts the number of
+   bytes between the count and the checksum.  A count of zero actually
+   means 256.  Any SYNs within the packet (including the checksum and
+   count) must be quoted.  The quote character must be quoted as well.
+   Quoting is done by replacing the character with the two-character sequence
+   DLE, {char} | 0100.  Note that the quoting mechanism has no effect on the
+   byte count.  */
+
+static void
+ocd_put_packet (buf, len)
+     unsigned char *buf;
+     int len;
+{
+  unsigned char checksum;
+  unsigned char c;
+  unsigned char *packet, *packet_ptr;
+
+  packet = alloca (len + 1 + 1); /* packet + SYN + checksum */
+  packet_ptr = packet;
+
+  checksum = 0;
+
+  *packet_ptr++ = 0x55;
+
+  while (len-- > 0)
+    {
+      c = *buf++;
+
+      checksum += c;
+      *packet_ptr++ = c;
+    }
+
+  *packet_ptr++ = -checksum;
+  if (SERIAL_WRITE (ocd_desc, packet, packet_ptr - packet))
+    perror_with_name ("output_packet: write failed");
+}
+#endif
+
+#if 0
+/* Get a packet from the OCD device.  Timeout is only enforced for the
+   first byte of the packet.  Subsequent bytes are expected to arrive in
+   time <= remote_timeout.  Returns a pointer to a static buffer containing
+   the payload of the packet.  *LENP contains the length of the packet.
+*/
+
+static unsigned char *
+stu_get_packet (cmd, lenp, timeout)
+     unsigned char cmd;
+     int *lenp;
+{
+  int ch;
+  int len;
+  static unsigned char buf[256 + 10], *p;
+  unsigned char checksum;
+
+ find_packet:
+
+  ch = get_quoted_char (timeout);
+
+  if (ch < 0)
+    error ("get_packet (readchar): %d", ch);
+
+  if (ch != RAW_SYN)
+    goto find_packet;
+
+ found_syn:			/* Found the start of a packet */
+
+  p = buf;
+  checksum = 0;
+
+  len = get_quoted_char (remote_timeout);
+
+  if (len == RAW_SYN)
+    goto found_syn;
+
+  checksum += len;
+
+  if (len == 0)
+    len = 256;
+
+  len++;			/* Include checksum */
+
+  while (len-- > 0)
+    {
+      ch = get_quoted_char (remote_timeout);
+      if (ch == RAW_SYN)
+	goto found_syn;
+
+      *p++ = ch;
+      checksum += ch;
+    }
+
+  if (checksum != 0)
+    goto find_packet;
+
+  if (cmd != buf[0])
+    error ("Response phase error.  Got 0x%x, expected 0x%x", buf[0], cmd);
+
+  *lenp = p - buf - 1;
+  return buf;
+}
+
+#else
+
+/* Get a packet from the OCD device.  Timeout is only enforced for the
+   first byte of the packet.  Subsequent bytes are expected to arrive in
+   time <= remote_timeout.  Returns a pointer to a static buffer containing
+   the payload of the packet.  *LENP contains the length of the packet.
+*/
+
+static unsigned char *
+ocd_get_packet (cmd, lenp, timeout)
+     int cmd;
+     int *lenp;
+{
+  int ch;
+  int len;
+  int i;
+  static unsigned char packet[512];
+  unsigned char *packet_ptr;
+  unsigned char checksum;
+
+  ch = readchar (timeout);
+
+  if (ch < 0)
+    error ("ocd_get_packet (readchar): %d", ch);
+
+  if (ch != 0x55)
+    error ("ocd_get_packet (readchar): %d", ch);
+
+/* Found the start of a packet */
+
+  packet_ptr = packet;
+  checksum = 0;
+
+/* Read command char.  That sort of tells us how long the packet is. */
+
+  ch = readchar (timeout);
+
+  if (ch < 0)
+    error ("ocd_get_packet (readchar): %d", ch);
+
+  *packet_ptr++ = ch;
+  checksum += ch;
+
+/* Get status. */
+
+  ch = readchar (timeout);
+
+  if (ch < 0)
+    error ("ocd_get_packet (readchar): %d", ch);
+  *packet_ptr++ = ch;
+  checksum += ch;
+
+/* Get error code. */
+
+  ch = readchar (timeout);
+
+  if (ch < 0)
+    error ("ocd_get_packet (readchar): %d", ch);
+  *packet_ptr++ = ch;
+  checksum += ch;
+
+  switch (ch)			/* Figure out length of packet */
+    {
+    case 0x7:			/* Write verify error? */
+      len = 8;			/* write address, value read back */
+      break;
+    case 0x11:			/* Bus error? */
+				/* write address, read flag */
+    case 0x15:			/* Internal error */
+      len = 5;			/* error code, vector */
+      break;
+    default:			/* Error w/no params */
+      len = 0;
+      break;
+    case 0x0:			/* Normal result */
+      switch (packet[0])
+	{
+	case OCD_AYT:	/* Are You There? */
+	case OCD_SET_BAUD_RATE: /* Set Baud Rate */
+	case OCD_INIT:	/* Initialize OCD device */
+	case OCD_SET_SPEED:	/* Set Speed */
+	case OCD_SET_FUNC_CODE: /* Set Function Code */
+	case OCD_SET_CTL_FLAGS: /* Set Control Flags */
+	case OCD_SET_BUF_ADDR: /* Set Register Buffer Address */
+	case OCD_RUN:	/* Run Target from PC  */
+	case OCD_RUN_ADDR:	/* Run Target from Specified Address  */
+	case OCD_STOP:	/* Stop Target */
+	case OCD_RESET_RUN:	/* Reset Target and Run */
+	case OCD_RESET:	/* Reset Target and Halt */
+	case OCD_STEP:	/* Single Step */
+	case OCD_WRITE_REGS: /* Write Register */
+	case OCD_WRITE_MEM:	/* Write Memory */
+	case OCD_FILL_MEM:	/* Fill Memory */
+	case OCD_MOVE_MEM:	/* Move Memory */
+	case OCD_WRITE_INT_MEM: /* Write Internal Memory */
+	case OCD_JUMP:	/* Jump to Subroutine */
+	case OCD_ERASE_FLASH: /* Erase flash memory */
+	case OCD_PROGRAM_FLASH: /* Write flash memory */
+	case OCD_EXIT_MON:	/* Exit the flash programming monitor  */
+	case OCD_ENTER_MON:	/* Enter the flash programming monitor  */
+	case OCD_LOG_FILE:	/* Make Wigglers.dll save Wigglers.log */
+	case OCD_SET_CONNECTION: /* Set type of connection in Wigglers.dll */
+	  len = 0;
+	  break;
+	case OCD_GET_VERSION: /* Get Version */
+	  len = 10;
+	  break;
+	case OCD_GET_STATUS_MASK: /* Get Status Mask */
+	  len = 1;
+	  break;
+	case OCD_GET_CTRS:	/* Get Error Counters */
+	case OCD_READ_REGS:	/* Read Register */
+	case OCD_READ_MEM:	/* Read Memory */
+	case OCD_READ_INT_MEM: /* Read Internal Memory */
+	  len = 257;
+	  break;
+	default:
+	  error ("ocd_get_packet: unknown packet type 0x%x\n", ch);
+	}
+    }
+
+  if (len == 257)		/* Byte stream? */
+    {				/* Yes, byte streams contain the length */
+      ch = readchar (timeout);
+
+      if (ch < 0)
+	error ("ocd_get_packet (readchar): %d", ch);
+      *packet_ptr++ = ch;
+      checksum += ch;
+      len = ch;
+      if (len == 0)
+	len = 256;
+    }
+
+  while (len-- >= 0)		/* Do rest of packet and checksum */
+    {
+      ch = readchar (timeout);
+
+      if (ch < 0)
+	error ("ocd_get_packet (readchar): %d", ch);
+      *packet_ptr++ = ch;
+      checksum += ch;
+    }
+
+  if (checksum != 0)
+    error ("ocd_get_packet: bad packet checksum");
+
+  if (cmd != -1 && cmd != packet[0])
+    error ("Response phase error.  Got 0x%x, expected 0x%x", packet[0], cmd);
+
+  *lenp = packet_ptr - packet - 1; /* Subtract checksum byte */
+  return packet;
+}
+#endif
+
+/* Execute a simple (one-byte) command.  Returns a pointer to the data
+   following the error code.  */
+
+static unsigned char *
+ocd_do_command (cmd, statusp, lenp)
+     int cmd;
+     int *statusp;
+     int *lenp;
+{
+  unsigned char buf[100], *p;
+  int status, error_code;
+  char errbuf[100];
+
+  unsigned char logbuf[100];
+  int logpktlen;
+
+  buf[0] = cmd;
+  ocd_put_packet (buf, 1);		/* Send command */
+  p = ocd_get_packet (*buf, lenp, remote_timeout);
+
+  if (*lenp < 3)
+    error ("Truncated response packet from OCD device");
+
+  status = p[1];
+  error_code = p[2];
+
+  if (error_code != 0)
+    {
+      sprintf (errbuf, "ocd_do_command (0x%x):", cmd);
+      ocd_error (errbuf, error_code);
+    }
+
+  if (status & OCD_FLAG_PWF)
+    error ("OCD device can't detect VCC at BDM interface.");
+  else if (status & OCD_FLAG_CABLE_DISC)
+    error ("BDM cable appears to be disconnected.");
+
+  *statusp = status;
+
+  logbuf[0] = OCD_LOG_FILE;
+  logbuf[1] = 3;   /* close existing WIGGLERS.LOG */
+  ocd_put_packet (logbuf, 2);
+  ocd_get_packet (logbuf[0], &logpktlen, remote_timeout);
+
+  logbuf[0] = OCD_LOG_FILE;
+  logbuf[1] = 2;   /* append to existing WIGGLERS.LOG */
+  ocd_put_packet (logbuf, 2);
+  ocd_get_packet (logbuf[0], &logpktlen, remote_timeout);
+
+  return p + 3;
+}
+
+void
+ocd_kill ()
+{
+  /* For some mysterious reason, wait_for_inferior calls kill instead of
+     mourn after it gets TARGET_WAITKIND_SIGNALLED.  Work around it.  */
+  if (kill_kludge)
+    {
+      kill_kludge = 0;
+      target_mourn_inferior ();
+      return;
+    }
+
+  /* Don't wait for it to die.  I'm not really sure it matters whether
+     we do or not.  */
+  target_mourn_inferior ();
+}
+
+void
+ocd_mourn ()
+{
+  unpush_target (current_ops);
+  generic_mourn_inferior ();
+}
+
+/* All we actually do is set the PC to the start address of exec_bfd, and start
+   the program at that point.  */
+
+void
+ocd_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  if (args && (*args != '\000'))
+    error ("Args are not supported by BDM.");
+
+  clear_proceed_status ();
+  proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
+}
+
+void
+ocd_load (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  generic_load (args, from_tty);
+
+  inferior_pid = 0;
+
+/* This is necessary because many things were based on the PC at the time that
+   we attached to the monitor, which is no longer valid now that we have loaded
+   new code (and just changed the PC).  Another way to do this might be to call
+   normal_stop, except that the stack may not be valid, and things would get
+   horribly confused... */
+
+  clear_symtab_users ();
+}
+
+/* This should be defined for each target */
+/* But we want to be able to compile this file for some configurations
+   not yet supported fully */
+   
+#define BDM_BREAKPOINT {0x0,0x0,0x0,0x0} /* For ppc 8xx */
+#if 0
+#define BDM_BREAKPOINT {0x4a,0xfa} /* BGND insn used for CPU32 */
+#endif
+
+/* BDM (at least on CPU32) uses a different breakpoint */
+
+int
+ocd_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  static char break_insn[] = BDM_BREAKPOINT;
+  int val;
+
+  val = target_read_memory (addr, contents_cache, sizeof (break_insn));
+
+  if (val == 0)
+    val = target_write_memory (addr, break_insn, sizeof (break_insn));
+
+  return val;
+}
+
+int
+ocd_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  static char break_insn[] = BDM_BREAKPOINT;
+  int val;
+
+  val = target_write_memory (addr, contents_cache, sizeof (break_insn));
+
+  return val;
+}
+
+static void
+bdm_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  error ("bdm command must be followed by `reset'");
+}
+
+static void
+bdm_reset_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int status, pktlen;
+
+  if (!ocd_desc)
+    error ("Not connected to OCD device.");
+
+  ocd_do_command (OCD_RESET, &status, &pktlen);
+  dcache_flush (ocd_dcache);
+  registers_changed ();
+}
+
+static void
+bdm_restart_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int status, pktlen;
+
+  if (!ocd_desc)
+    error ("Not connected to OCD device.");
+
+  ocd_do_command (OCD_RESET_RUN, &status, &pktlen);
+  last_run_status = status;
+  clear_proceed_status ();
+  wait_for_inferior ();
+  normal_stop ();
+}
+
+/* Temporary replacement for target_store_registers().  This prevents
+   generic_load from trying to set the PC.  */
+
+static void
+noop_store_registers (regno)
+     int regno;
+{
+}
+
+static void
+bdm_update_flash_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int status, pktlen;
+  struct cleanup *old_chain;
+  void (*store_registers_tmp) PARAMS ((int));
+
+  if (!ocd_desc)
+    error ("Not connected to OCD device.");
+
+  if (!args)
+    error ("Must specify file containing new OCD code.");
+
+/*  old_chain = make_cleanup (flash_cleanup, 0);*/
+
+  ocd_do_command (OCD_ENTER_MON, &status, &pktlen);
+
+  ocd_do_command (OCD_ERASE_FLASH, &status, &pktlen);
+
+  write_mem_command = OCD_PROGRAM_FLASH;
+  store_registers_tmp = current_target.to_store_registers;
+  current_target.to_store_registers = noop_store_registers;
+
+  generic_load (args, from_tty);
+
+  current_target.to_store_registers = store_registers_tmp;
+  write_mem_command = OCD_WRITE_MEM;
+
+  ocd_do_command (OCD_EXIT_MON, &status, &pktlen);
+
+/*  discard_cleanups (old_chain);*/
+}
+
+static void
+bdm_read_register_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* XXX repeat should go on to the next register */
+
+  if (!ocd_desc)
+    error ("Not connected to OCD device.");
+
+  if (!args)
+    error ("Must specify BDM register number.");
+
+}
+
+void
+_initialize_remote_ocd ()
+{
+  extern struct cmd_list_element *cmdlist;
+  static struct cmd_list_element *ocd_cmd_list = NULL;
+
+  add_show_from_set (add_set_cmd ("remotetimeout", no_class,
+				  var_integer, (char *)&remote_timeout,
+				  "Set timeout value for remote read.\n", &setlist),
+		     &showlist);
+
+  add_prefix_cmd ("ocd", class_obscure, bdm_command, "", &ocd_cmd_list, "ocd ",
+		  0, &cmdlist);
+
+  add_cmd ("reset", class_obscure, bdm_reset_command, "", &ocd_cmd_list);
+  add_cmd ("restart", class_obscure, bdm_restart_command, "", &ocd_cmd_list);
+  add_cmd ("update-flash", class_obscure, bdm_update_flash_command, "", &ocd_cmd_list);
+  /*  add_cmd ("read-register", class_obscure, bdm_read_register_command, "", &ocd_cmd_list);*/
+}
diff --git a/gdb/ocd.h b/gdb/ocd.h
new file mode 100644
index 0000000..020d3e2
--- /dev/null
+++ b/gdb/ocd.h
@@ -0,0 +1,139 @@
+/* Definitions for the Macraigor Systems BDM Wiggler
+   Copyright 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef OCD_H
+#define OCD_H
+
+/* Wiggler serial protocol definitions */
+
+#define DLE 020			/* Quote char */
+#define SYN 026			/* Start of packet */
+#define RAW_SYN ((026 << 8) | 026) /* get_quoted_char found a naked SYN */
+
+/* Status flags */
+
+#define OCD_FLAG_RESET 0x01	/* Target is being reset */
+#define OCD_FLAG_STOPPED 0x02	/* Target is halted */
+#define OCD_FLAG_BDM 0x04	/* Target is in BDM */
+#define OCD_FLAG_PWF 0x08	/* Power failed */
+#define OCD_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
+
+/* Commands */
+
+#define OCD_AYT 0x0		/* Are you there? */
+#define OCD_GET_VERSION 0x1	/* Get Version */
+#define OCD_SET_BAUD_RATE 0x2	/* Set Baud Rate */
+#define OCD_INIT 0x10		/* Initialize Wiggler */
+#define OCD_SET_SPEED 0x11	/* Set Speed */
+#define OCD_GET_STATUS_MASK 0x12 /* Get Status Mask */
+#define OCD_GET_CTRS 0x13	/* Get Error Counters */
+#define OCD_SET_FUNC_CODE 0x14	/* Set Function Code */
+#define OCD_SET_CTL_FLAGS 0x15	/* Set Control Flags */
+#define OCD_SET_BUF_ADDR 0x16	/* Set Register Buffer Address */
+#define OCD_RUN 0x20		/* Run Target from PC */
+#define OCD_RUN_ADDR 0x21	/* Run Target from Specified Address */
+#define OCD_STOP 0x22		/* Stop Target */
+#define OCD_RESET_RUN 0x23	/* Reset Target and Run */
+#define OCD_RESET 0x24		/* Reset Target and Halt */
+#define OCD_STEP 0x25		/* Single step */
+#define OCD_READ_REGS 0x30	/* Read Registers */
+#define OCD_WRITE_REGS 0x31	/* Write Registers */
+#define OCD_READ_MEM 0x32	/* Read Memory */
+#define OCD_WRITE_MEM 0x33	/* Write Memory */
+#define OCD_FILL_MEM 0x34	/* Fill Memory */
+#define OCD_MOVE_MEM 0x35	/* Move Memory */
+
+#define OCD_READ_INT_MEM 0x80	/* Read Internal Memory */
+#define OCD_WRITE_INT_MEM 0x81	/* Write Internal Memory */
+#define OCD_JUMP 0x82		/* Jump to Subroutine */
+
+#define OCD_ERASE_FLASH 0x90	/* Erase flash memory */
+#define OCD_PROGRAM_FLASH 0x91	/* Write flash memory */
+#define OCD_EXIT_MON 0x93	/* Exit the flash programming monitor  */
+#define OCD_ENTER_MON 0x94	/* Enter the flash programming monitor  */
+
+#define OCD_SET_STATUS 0x0a	/* Set status */
+#define OCD_SET_CONNECTION 0xf0	/* Set connection (init Wigglers.dll) */
+#define OCD_LOG_FILE 0xf1	/* Cmd to get Wigglers.dll to log cmds */
+#define OCD_FLAG_STOP 0x0	/* Stop the target, enter BDM */
+#define OCD_FLAG_START 0x01	/* Start the target at PC */
+#define OCD_FLAG_RETURN_STATUS 0x04 /* Return async status */
+
+/* Target type (for OCD_INIT command) */
+
+enum ocd_target_type {
+  OCD_TARGET_CPU32=0x0,		/* Moto cpu32 family */
+  OCD_TARGET_CPU16=0x1,
+  OCD_TARGET_MOTO_PPC=0x2,	/* Motorola PPC 5xx/8xx */
+  OCD_TARGET_IBM_PPC=0x3};	/* IBM PPC 4xx */
+
+void ocd_open PARAMS ((char *name, int from_tty, enum ocd_target_type,
+			   struct target_ops *ops));
+
+void ocd_close PARAMS ((int quitting));
+
+void ocd_detach PARAMS ((char *args, int from_tty));
+
+void ocd_resume PARAMS ((int pid, int step, enum target_signal siggnal));
+
+void ocd_prepare_to_store PARAMS ((void));
+
+void ocd_stop PARAMS ((void));
+
+void ocd_files_info PARAMS ((struct target_ops *ignore));
+
+
+int ocd_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+				 int len, int should_write,
+				 struct target_ops *target));
+
+void ocd_mourn PARAMS ((void));
+
+void ocd_create_inferior PARAMS ((char *exec_file,
+				      char *args,
+				      char **env));
+
+int ocd_thread_alive PARAMS ((int th));
+
+void ocd_error PARAMS ((char *s, int error_code));
+
+void ocd_kill PARAMS ((void));
+
+void ocd_load PARAMS((char *args, int from_tty));
+
+unsigned char * ocd_read_bdm_registers PARAMS ((int first_bdm_regno,
+						    int last_bdm_regno,
+						    int *reglen));
+
+CORE_ADDR ocd_read_bdm_register PARAMS ((int bdm_regno));
+
+void ocd_write_bdm_registers PARAMS ((int first_bdm_regno,
+					  unsigned char *regptr,
+					  int reglen));
+
+void ocd_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));
+
+int ocd_wait PARAMS ((void));
+
+int ocd_insert_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));
+int ocd_remove_breakpoint PARAMS ((CORE_ADDR addr, char *contents_cache));
+
+int ocd_write_bytes PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+
+#endif /* OCD_H */
diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c
new file mode 100644
index 0000000..3262091
--- /dev/null
+++ b/gdb/op50-rom.c
@@ -0,0 +1,142 @@
+/* Remote target glue for the Oki op50n based eval board.
+
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void op50n_open PARAMS ((char *args, int from_tty));
+
+/*
+ * this array of registers need to match the indexes used by GDB. The
+ * whole reason this exists is cause the various ROM monitors use
+ * different strings than GDB does, and doesn't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+
+static char *op50n_regnames[NUM_REGS] =
+{
+  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+  "cr11", "p", NULL, NULL, NULL, "cr15", "cr19", "cr20",
+  "cr21", "cr22", NULL, NULL, NULL, NULL, NULL, NULL,
+  NULL, NULL, NULL, "cr0", "cr8", "cr9", "cr10","cr12",
+  "cr13", "cr24", "cr25", "cr26",
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops op50n_ops;
+
+static char *op50n_inits[] = {".\r", NULL};
+
+static struct monitor_ops op50n_cmds ;
+
+static void 
+init_op50n_cmds(void)
+{
+  op50n_cmds.flags =   MO_CLR_BREAK_USES_ADDR /*| MO_GETMEM_READ_SINGLE*/; /* flags */
+  op50n_cmds.init =   op50n_inits;			/* Init strings */
+  op50n_cmds.cont =   "g\r";			/* continue command */
+  op50n_cmds.step =   "t\r";			/* single step */
+  op50n_cmds.stop =   "\003.\r";			/* Interrupt char */
+  op50n_cmds.set_break =   "b %x\r";			/* set a breakpoint */
+  op50n_cmds.clr_break =   "b %x;0\r";			/* clear breakpoint at addr */
+  op50n_cmds.clr_all_break =   "bx\r";			/* clear all breakpoints */
+  op50n_cmds.fill =   "fx %x s%x %x\r";		/* memory fill cmd (addr, len, val) */
+  op50n_cmds.setmem.cmdb =     "sx %x %x\r";		/* setmem.cmdb (addr, value) */
+  op50n_cmds.setmem.cmdw =     "sh %x %x\r";		/* setmem.cmdw (addr, value) */
+  op50n_cmds.setmem.cmdl =     "s %x %x\r";		/* setmem.cmdl (addr, value) */
+  op50n_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  op50n_cmds.setmem.resp_delim =     NULL;			/* setmem.resp_delim */
+  op50n_cmds.setmem.term =     NULL;			/* setmem.term */
+  op50n_cmds.setmem.term_cmd =     NULL;			/* setmem.term_cmd */
+#if 0
+  {
+    "sx %x\r",			/* getmem.cmdb (addr, len) */
+      "sh %x\r",			/* getmem.cmdw (addr, len) */
+      "s %x\r",			/* getmem.cmdl (addr, len) */
+      NULL,			/* getmem.cmdll (addr, len) */
+      " : ",			/* getmem.resp_delim */
+      " ",			/* getmem.term */
+      ".\r",			/* getmem.term_cmd */
+      } ;
+#else
+  op50n_cmds.getmem.cmdb =     "dx %x s%x\r";		/* getmem.cmdb (addr, len) */
+  op50n_cmds.getmem.cmdw =     NULL;			/* getmem.cmdw (addr, len) */
+  op50n_cmds.getmem.cmdl =     NULL;			/* getmem.cmdl (addr, len) */
+  op50n_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, len) */
+  op50n_cmds.getmem.resp_delim =     " : ";			/* getmem.resp_delim */
+  op50n_cmds.getmem.term =     NULL;			/* getmem.term */
+  op50n_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+#endif
+  op50n_cmds.setreg.cmd =     "x %s %x\r";		/* setreg.cmd (name, value) */
+  op50n_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  op50n_cmds.setreg.term =     NULL;			/* setreg.term */
+  op50n_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  op50n_cmds.getreg.cmd =     "x %s\r";			/* getreg.cmd (name) */
+  op50n_cmds.getreg.resp_delim =     "=";			/* getreg.resp_delim */
+  op50n_cmds.getreg.term =     " ";			/* getreg.term */
+  op50n_cmds.getreg.term_cmd =     ".\r";			/* getreg.term_cmd */
+  op50n_cmds.dump_registers =   NULL;				/* dump_registers */
+  op50n_cmds.register_pattern =   NULL;				/* register_pattern */
+  op50n_cmds.supply_register =   NULL;				/* supply_register */
+  op50n_cmds.load_routine =   NULL;				/* load routine */
+  op50n_cmds.load =   "r 0\r";			/* download command */
+  op50n_cmds.loadresp =   NULL;				/* load response */
+  op50n_cmds.prompt =   "\n#";			/* monitor command prompt */
+  op50n_cmds.line_term =   "\r";				/* end-of-command delimitor */
+  op50n_cmds.cmd_end =   NULL;				/* optional command terminator */
+  op50n_cmds.target =   &op50n_ops;			/* target operations */
+  op50n_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  op50n_cmds.regnames =   op50n_regnames;		/* register names */
+  op50n_cmds.magic =   MONITOR_OPS_MAGIC;		/* magic */
+};
+
+static void
+op50n_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &op50n_cmds, from_tty);
+}
+
+void
+_initialize_op50n ()
+{
+  init_op50n_cmds() ;
+  init_monitor_ops (&op50n_ops);
+
+  op50n_ops.to_shortname = "op50n";
+  op50n_ops.to_longname = "Oki's debug monitor for the Op50n Eval board";
+  op50n_ops.to_doc = "Debug on a Oki OP50N eval board.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  op50n_ops.to_open = op50n_open;
+
+  add_target (&op50n_ops);
+}
diff --git a/gdb/os9kread.c b/gdb/os9kread.c
new file mode 100644
index 0000000..673d415
--- /dev/null
+++ b/gdb/os9kread.c
@@ -0,0 +1,1624 @@
+/* Read os9/os9k symbol tables and convert to internal format, for GDB.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 96, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module provides three functions: os9k_symfile_init,
+   which initializes to read a symbol file; os9k_new_init, which 
+   discards existing cached information when all symbols are being
+   discarded; and os9k_symfile_read, which reads a symbol table
+   from a file.
+
+   os9k_symfile_read only does the minimum work necessary for letting the
+   user "name" things symbolically; it does not read the entire symtab.
+   Instead, it reads the external and static symbols and puts them in partial
+   symbol tables.  When more extensive information is requested of a
+   file, the corresponding partial symbol table is mutated into a full
+   fledged symbol table by going back and reading the symbols
+   for real.  os9k_psymtab_to_symtab() is the function that does this */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <stdio.h>
+
+#if defined(USG) || defined(__CYGNUSCLIB__)
+#include <sys/types.h>
+#include <fcntl.h>
+#endif
+
+#include "obstack.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "breakpoint.h"
+#include "command.h"
+#include "target.h"
+#include "gdbcore.h"		/* for bfd stuff */
+#include "libaout.h"	 	/* FIXME Secret internal BFD stuff for a.out */
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "gdb-stabs.h"
+#include "demangle.h"
+#include "language.h"		/* Needed inside partial-stab.h */
+#include "complaints.h"
+#include "os9k.h"
+#include "stabsread.h"
+
+/* Each partial symbol table entry contains a pointer to private data for the
+   read_symtab() function to use when expanding a partial symbol table entry
+   to a full symbol table entry.
+
+   For dbxread this structure contains the offset within the file symbol table
+   of first local symbol for this file, and count of the section
+   of the symbol table devoted to this file's symbols (actually, the section
+   bracketed may contain more than just this file's symbols).  It also contains
+   further information needed to locate the symbols if they are in an ELF file.
+
+   If ldsymcnt is 0, the only reason for this thing's existence is the
+   dependency list.  Nothing else will happen when it is read in.  */
+
+#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
+#define LDSYMCNT(p) (((struct symloc *)((p)->read_symtab_private))->ldsymnum)
+
+struct symloc {
+  int ldsymoff;
+  int ldsymnum;
+};
+
+/* Remember what we deduced to be the source language of this psymtab. */
+static enum language psymtab_language = language_unknown;
+
+/* keep partial symbol table file nested depth */
+static int psymfile_depth = 0;
+
+/* keep symbol table file nested depth */
+static int symfile_depth = 0;
+
+/* Nonzero means give verbose info on gdb action.  From main.c.  */
+extern int info_verbose;
+
+extern int previous_stab_code;
+
+/* Name of last function encountered.  Used in Solaris to approximate
+   object file boundaries.  */
+static char *last_function_name;
+
+/* Complaints about the symbols we have encountered.  */
+extern struct complaint lbrac_complaint;
+
+extern struct complaint unknown_symtype_complaint;
+
+extern struct complaint unknown_symchar_complaint;
+
+extern struct complaint lbrac_rbrac_complaint;
+
+extern struct complaint repeated_header_complaint;
+
+extern struct complaint repeated_header_name_complaint;
+
+#if 0
+static struct complaint lbrac_unmatched_complaint =
+  {"unmatched Increment Block Entry before symtab pos %d", 0, 0};
+
+static struct complaint lbrac_mismatch_complaint =
+  {"IBE/IDE symbol mismatch at symtab pos %d", 0, 0};
+#endif
+
+/* Local function prototypes */
+
+static void
+read_minimal_symbols PARAMS ((struct objfile *, struct section_offsets *));
+
+static void
+os9k_read_ofile_symtab PARAMS ((struct partial_symtab *));
+
+static void
+os9k_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+static void
+os9k_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+
+static void
+read_os9k_psymtab PARAMS ((struct section_offsets *, struct objfile *,
+                         CORE_ADDR, int));
+
+static int
+fill_sym PARAMS ((FILE *, bfd *));
+
+static void
+os9k_symfile_init PARAMS ((struct objfile *));
+
+static void
+os9k_new_init PARAMS ((struct objfile *));
+
+static void
+os9k_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+os9k_symfile_finish PARAMS ((struct objfile *));
+
+static void
+os9k_process_one_symbol PARAMS ((int, int, CORE_ADDR, char *, 
+     struct section_offsets *, struct objfile *));
+
+static struct partial_symtab *
+os9k_start_psymtab PARAMS ((struct objfile *, struct section_offsets *, char *,
+                       CORE_ADDR, int, int, struct partial_symbol **,
+                       struct partial_symbol **));
+
+static struct partial_symtab *
+os9k_end_psymtab PARAMS ((struct partial_symtab *, char **, int, int, CORE_ADDR,
+                     struct partial_symtab **, int));
+
+static void
+record_minimal_symbol PARAMS ((char *, CORE_ADDR, int, struct objfile *, 
+	             struct section_offsets *));
+
+#define HANDLE_RBRAC(val) \
+  if ((val) > pst->texthigh) pst->texthigh = (val);
+
+#define SWAP_STBHDR(hdrp, abfd) \
+  { \
+    (hdrp)->fmtno = bfd_get_16(abfd, (unsigned char *)&(hdrp)->fmtno); \
+    (hdrp)->crc = bfd_get_32(abfd, (unsigned char *)&(hdrp)->crc); \
+    (hdrp)->offset = bfd_get_32(abfd, (unsigned char *)&(hdrp)->offset); \
+    (hdrp)->nsym = bfd_get_32(abfd, (unsigned char *)&(hdrp)->nsym); \
+  }
+#define SWAP_STBSYM(symp, abfd) \
+  { \
+    (symp)->value = bfd_get_32(abfd, (unsigned char *)&(symp)->value); \
+    (symp)->type = bfd_get_16(abfd, (unsigned char *)&(symp)->type); \
+    (symp)->stroff = bfd_get_32(abfd, (unsigned char *)&(symp)->stroff); \
+  }
+#define N_DATA 0
+#define N_BSS 1
+#define N_RDATA 2
+#define N_IDATA 3
+#define N_TEXT 4
+#define N_ABS 6
+
+static void
+record_minimal_symbol (name, address, type, objfile, section_offsets)
+     char *name;
+     CORE_ADDR address;
+     int type;
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+{
+  enum minimal_symbol_type ms_type;
+
+  switch (type)
+    {
+    case N_TEXT:
+	  ms_type = mst_text;
+	  address += ANOFFSET(section_offsets, SECT_OFF_TEXT);
+	  break;
+    case N_DATA:
+	  ms_type = mst_data;
+	  break;
+    case N_BSS:
+          ms_type = mst_bss;
+	  break;
+    case N_RDATA:
+	  ms_type = mst_bss;
+	  break;
+    case N_IDATA:	
+	  ms_type = mst_data;
+	  break;
+    case N_ABS:
+	  ms_type = mst_abs;
+	  break;
+    default:
+          ms_type = mst_unknown; break;
+  }
+
+  prim_record_minimal_symbol (name, address, ms_type, objfile);
+}
+
+/* read and process .stb file and store in minimal symbol table */
+typedef char mhhdr[80];
+struct stbhdr {
+	mhhdr comhdr;
+	char * name;
+	short fmtno;
+	int crc;
+	int offset;
+	int nsym;
+	char *pad;
+};
+struct stbsymbol {
+	int value;
+	short type;
+	int stroff;
+};
+#define STBSYMSIZE 10
+
+static void
+read_minimal_symbols(objfile, section_offsets)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+{
+FILE *fp;
+bfd *abfd;
+struct stbhdr hdr;
+struct stbsymbol sym;
+int ch, i, j, off;
+char buf[64], buf1[128];
+		
+  fp = objfile->auxf1;
+  if (fp == NULL) return;
+  abfd = objfile->obfd;
+  fread(&hdr.comhdr[0], sizeof(mhhdr), 1, fp);
+  i = 0;
+  ch = getc(fp);
+  while (ch != -1) {
+    buf[i] = (char)ch;
+    i++;
+    if (ch == 0) break;
+    ch = getc(fp);
+  };
+  if (i%2) ch=getc(fp);
+  hdr.name = &buf[0];
+
+  fread(&hdr.fmtno, sizeof(hdr.fmtno), 1, fp);
+  fread(&hdr.crc, sizeof(hdr.crc), 1, fp);
+  fread(&hdr.offset, sizeof(hdr.offset), 1, fp);
+  fread(&hdr.nsym, sizeof(hdr.nsym), 1, fp);
+  SWAP_STBHDR(&hdr, abfd);      
+	
+  /* read symbols */
+  init_minimal_symbol_collection();
+  off = hdr.offset;
+  for (i = hdr.nsym; i > 0; i--) {
+    fseek(fp, (long)off, 0);
+    fread(&sym.value, sizeof(sym.value), 1, fp);
+    fread(&sym.type, sizeof(sym.type), 1, fp);
+    fread(&sym.stroff, sizeof(sym.stroff), 1, fp);
+    SWAP_STBSYM (&sym, abfd);
+    fseek(fp, (long)sym.stroff, 0);
+    j = 0;
+    ch = getc(fp);
+    while (ch != -1) {
+	buf1[j] = (char)ch;
+	j++;
+	if (ch == 0) break;
+	ch = getc(fp);
+    };
+    record_minimal_symbol(buf1, sym.value, sym.type&7, objfile, section_offsets);
+    off += STBSYMSIZE;
+  };
+  install_minimal_symbols (objfile);
+  return;
+}
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to os9k_symfile_init, which 
+   put all the relevant info into a "struct os9k_symfile_info",
+   hung off the objfile structure.
+
+   SECTION_OFFSETS contains offsets relative to which the symbols in the
+   various sections are (depending where the sections were actually loaded).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).  */
+
+static void
+os9k_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;	/* FIXME comments above */
+{
+  bfd *sym_bfd;
+  struct cleanup *back_to;
+
+  sym_bfd = objfile->obfd;
+  /* If we are reinitializing, or if we have never loaded syms yet, init */
+  if (mainline || objfile->global_psymbols.size == 0 || 
+    objfile->static_psymbols.size == 0)
+    init_psymbol_list (objfile, DBX_SYMCOUNT (objfile));
+
+  free_pending_blocks ();
+  back_to = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+  make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+  read_minimal_symbols (objfile, section_offsets);
+
+  /* Now that the symbol table data of the executable file are all in core,
+     process them and define symbols accordingly.  */
+  read_os9k_psymtab (section_offsets, objfile,
+		     DBX_TEXT_ADDR (objfile),
+		     DBX_TEXT_SIZE (objfile));
+
+  do_cleanups (back_to);
+}
+
+/* Initialize anything that needs initializing when a completely new
+   symbol file is specified (not just adding some symbols from another
+   file, e.g. a shared library).  */
+
+static void
+os9k_new_init (ignore)
+     struct objfile *ignore;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+  psymfile_depth = 0;
+/*
+  init_header_files ();
+*/
+}
+
+/* os9k_symfile_init ()
+   It is passed a struct objfile which contains, among other things,
+   the BFD for the file whose symbols are being read, and a slot for a pointer
+   to "private data" which we fill with goodies.
+
+   Since BFD doesn't know how to read debug symbols in a format-independent
+   way (and may never do so...), we have to do it ourselves.  We will never
+   be called unless this is an a.out (or very similar) file. 
+   FIXME, there should be a cleaner peephole into the BFD environment here.  */
+
+static void
+os9k_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  bfd *sym_bfd = objfile->obfd;
+  char *name = bfd_get_filename (sym_bfd);
+  char dbgname[512], stbname[512];
+  FILE *symfile = 0;
+  FILE *minfile = 0;
+  asection *text_sect;
+
+  strcpy(dbgname, name);
+  strcat(dbgname, ".dbg");
+  strcpy(stbname, name);
+  strcat(stbname, ".stb");
+
+  if ((symfile = fopen(dbgname, "r")) == NULL) {
+    warning("Symbol file %s not found", dbgname);
+  }
+  objfile->auxf2 = symfile;
+
+  if ((minfile = fopen(stbname, "r")) == NULL) {
+    warning("Symbol file %s not found", stbname);
+  }
+  objfile->auxf1 = minfile;
+
+  /* Allocate struct to keep track of the symfile */
+  objfile->sym_stab_info = (struct dbx_symfile_info *)
+    xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
+  DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
+
+  text_sect = bfd_get_section_by_name (sym_bfd, ".text");
+  if (!text_sect)
+    error ("Can't find .text section in file");
+  DBX_TEXT_ADDR (objfile) = bfd_section_vma (sym_bfd, text_sect);
+  DBX_TEXT_SIZE (objfile) = bfd_section_size (sym_bfd, text_sect);
+
+  DBX_SYMBOL_SIZE (objfile) = 0;     /* variable size symbol */
+  DBX_SYMCOUNT (objfile) =  0;  /* used to be bfd_get_symcount(sym_bfd) */
+  DBX_SYMTAB_OFFSET (objfile) = 0;  /* used to be SYMBOL_TABLE_OFFSET */
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+os9k_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile->sym_stab_info != NULL)
+    {
+      mfree (objfile -> md, objfile->sym_stab_info);
+    }
+/*
+  free_header_files ();
+*/
+}
+
+
+struct st_dbghdr {
+  int sync;
+  short rev;
+  int crc;
+  short os;
+  short cpu;
+};
+#define SYNC 		(int)0xefbefeca
+
+#define SWAP_DBGHDR(hdrp, abfd) \
+  { \
+    (hdrp)->sync = bfd_get_32(abfd, (unsigned char *)&(hdrp)->sync); \
+    (hdrp)->rev = bfd_get_16(abfd, (unsigned char *)&(hdrp)->rev); \
+    (hdrp)->crc = bfd_get_32(abfd, (unsigned char *)&(hdrp)->crc); \
+    (hdrp)->os = bfd_get_16(abfd, (unsigned char *)&(hdrp)->os); \
+    (hdrp)->cpu = bfd_get_16(abfd, (unsigned char *)&(hdrp)->cpu); \
+  }
+
+#define N_SYM_CMPLR     0
+#define N_SYM_SLINE     1
+#define N_SYM_SYM       2
+#define N_SYM_LBRAC     3
+#define N_SYM_RBRAC     4
+#define N_SYM_SE        5
+
+struct internal_symstruct {
+  short n_type;
+  short n_desc;
+  long n_value;
+  char * n_strx;
+};
+static struct internal_symstruct symbol;
+static struct internal_symstruct *symbuf = &symbol;
+static char strbuf[4096];
+static struct st_dbghdr dbghdr;
+static short cmplrid;
+
+#define VER_PRE_ULTRAC	((short)4)
+#define VER_ULTRAC	((short)5)
+
+static int
+fill_sym (dbg_file, abfd)
+     FILE *dbg_file;
+     bfd *abfd;
+{
+short si, nmask;
+long li;
+int ii;
+char *p;
+
+  int nbytes = fread(&si, sizeof(si), 1, dbg_file);
+  if (nbytes == 0)
+    return 0;
+  if (nbytes < 0)
+    perror_with_name ("reading .dbg file.");
+  symbuf->n_desc = 0;
+  symbuf->n_value = 0;
+  symbuf->n_strx = NULL;
+  symbuf->n_type = bfd_get_16 (abfd, (unsigned char *)&si);
+  symbuf->n_type = 0xf & symbuf->n_type;
+  switch (symbuf->n_type)
+    {
+    case N_SYM_CMPLR:
+      fread(&si, sizeof(si), 1, dbg_file);
+      symbuf->n_desc = bfd_get_16(abfd, (unsigned char *)&si);
+      cmplrid = symbuf->n_desc & 0xff;
+      break;
+    case N_SYM_SLINE:
+      fread(&li, sizeof(li), 1, dbg_file);
+      symbuf->n_value = bfd_get_32(abfd, (unsigned char *)&li);
+      fread(&li, sizeof(li), 1, dbg_file);
+      li = bfd_get_32(abfd, (unsigned char *)&li);
+      symbuf->n_strx = (char *)(li >> 12);
+      symbuf->n_desc = li & 0xfff;
+      break;
+    case N_SYM_SYM:
+      fread(&li, sizeof(li), 1, dbg_file);
+      symbuf->n_value = bfd_get_32(abfd, (unsigned char *)&li);
+      si = 0;
+      do {
+	ii = getc(dbg_file);
+	strbuf[si++] = (char) ii;
+      } while (ii != 0 || si % 2 != 0);
+      symbuf->n_strx = strbuf;
+      p = (char *) strchr (strbuf, ':');
+      if (!p) break;
+      if ((p[1] == 'F' || p[1] == 'f') && cmplrid == VER_PRE_ULTRAC)
+	{
+	  fread(&si, sizeof(si), 1, dbg_file);
+	  nmask = bfd_get_16(abfd, (unsigned char *)&si);
+	  for (ii=0; ii<nmask; ii++)
+	    fread(&si, sizeof(si), 1, dbg_file);
+	}
+      break;
+    case N_SYM_LBRAC:
+      fread(&li, sizeof(li), 1, dbg_file);
+      symbuf->n_value = bfd_get_32(abfd, (unsigned char *)&li);
+      break;
+    case N_SYM_RBRAC:
+      fread(&li, sizeof(li), 1, dbg_file);
+      symbuf->n_value = bfd_get_32(abfd, (unsigned char *)&li);
+      break;
+    case N_SYM_SE:
+      break;
+    }
+    return 1;
+}
+
+/* Given pointers to an a.out symbol table in core containing dbx
+   style data, setup partial_symtab's describing each source file for
+   which debugging information is available.
+   SYMFILE_NAME is the name of the file we are reading from
+   and SECTION_OFFSETS is the set of offsets for the various sections
+   of the file (a set of zeros if the mainline program).  */
+
+static void
+read_os9k_psymtab (section_offsets, objfile, text_addr, text_size)
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+     CORE_ADDR text_addr;
+     int text_size;
+{
+  register struct internal_symstruct *bufp = 0;	/* =0 avoids gcc -Wall glitch*/
+  register char *namestring;
+  int past_first_source_file = 0;
+  CORE_ADDR last_o_file_start = 0;
+#if 0
+  struct cleanup *back_to;
+#endif
+  bfd *abfd;
+  FILE *fp;
+
+  /* End of the text segment of the executable file.  */
+  static CORE_ADDR end_of_text_addr;
+
+  /* Current partial symtab */
+  static struct partial_symtab *pst = 0;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  last_source_file = NULL;
+
+#ifdef END_OF_TEXT_DEFAULT
+  end_of_text_addr = END_OF_TEXT_DEFAULT;
+#else
+  end_of_text_addr = text_addr + section_offsets->offsets[SECT_OFF_TEXT]
+			       + text_size;	/* Relocate */
+#endif
+
+  abfd = objfile->obfd;
+  fp = objfile->auxf2; 
+  if (!fp) return;
+		
+  fread(&dbghdr.sync, sizeof(dbghdr.sync), 1, fp);
+  fread(&dbghdr.rev, sizeof(dbghdr.rev), 1, fp);
+  fread(&dbghdr.crc, sizeof(dbghdr.crc), 1, fp);
+  fread(&dbghdr.os, sizeof(dbghdr.os), 1, fp);
+  fread(&dbghdr.cpu, sizeof(dbghdr.cpu), 1, fp);
+  SWAP_DBGHDR(&dbghdr, abfd);      
+
+  symnum = 0;
+  while(1)
+    {
+    int ret;
+    long cursymoffset;
+
+      /* Get the symbol for this run and pull out some info */
+      QUIT;	/* allow this to be interruptable */
+      cursymoffset = ftell(objfile->auxf2);
+      ret = fill_sym(objfile->auxf2, abfd);
+      if (ret <= 0) break;
+      else symnum++;
+      bufp = symbuf;
+
+      /* Special case to speed up readin. */
+      if (bufp->n_type == (short)N_SYM_SLINE) continue;
+
+#define CUR_SYMBOL_VALUE bufp->n_value
+      /* partial-stab.h */
+
+      switch (bufp->n_type)
+	{
+	char *p;
+
+	case N_SYM_CMPLR:
+	  continue;
+
+	case N_SYM_SE:
+          CUR_SYMBOL_VALUE += ANOFFSET(section_offsets, SECT_OFF_TEXT);
+	  if (psymfile_depth == 1 && pst)
+	    {
+	      os9k_end_psymtab (pst, psymtab_include_list, includes_used,
+		       symnum, CUR_SYMBOL_VALUE,
+		       dependency_list, dependencies_used);
+	      pst = (struct partial_symtab *) 0;
+	      includes_used = 0;
+	      dependencies_used = 0;
+	    }
+  	  psymfile_depth--;
+	  continue;
+
+	case N_SYM_SYM:		/* Typedef or automatic variable. */
+	  namestring = bufp->n_strx;
+          p = (char *) strchr (namestring, ':');
+          if (!p)
+            continue;           /* Not a debugging symbol.   */
+
+	  /* Main processing section for debugging symbols which
+	     the initial read through the symbol tables needs to worry
+	     about.  If we reach this point, the symbol which we are
+	     considering is definitely one we are interested in.
+	     p must also contain the (valid) index into the namestring
+	     which indicates the debugging type symbol.  */
+
+	  switch (p[1])
+	    {
+	    case 'S' :
+	      {
+		unsigned long valu;
+            	enum language tmp_language;
+		char *str, *p;
+		int n;
+		
+		valu = CUR_SYMBOL_VALUE;
+		if (valu)
+		  valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+		past_first_source_file = 1;
+
+                p = strchr(namestring, ':');
+                if (p) n = p-namestring;
+                else n = strlen(namestring);
+                str = alloca(n+1);
+                strncpy(str, namestring, n);
+                str[n] = '\0';
+
+		if (psymfile_depth == 0) {
+		  if (!pst)
+		    pst = os9k_start_psymtab (objfile, section_offsets,
+				 str, valu,
+				 cursymoffset,
+				 symnum-1,
+				 objfile -> global_psymbols.next,
+				 objfile -> static_psymbols.next);
+		} else { /* this is a include file */
+            	  tmp_language = deduce_language_from_filename (str);
+            	  if (tmp_language != language_unknown
+                	&& (tmp_language != language_c
+                    	|| psymtab_language != language_cplus))
+              		psymtab_language = tmp_language;
+
+/*
+		  if (pst && STREQ (str, pst->filename))
+		    continue;
+		  {
+		    register int i;
+		    for (i = 0; i < includes_used; i++)
+		      if (STREQ (str, psymtab_include_list[i]))
+			{
+			  i = -1; 
+			  break;
+			}
+		    if (i == -1)
+		      continue;
+		  }
+*/
+
+                  psymtab_include_list[includes_used++] = str;
+                  if (includes_used >= includes_allocated)
+                    {
+                      char **orig = psymtab_include_list;
+
+                      psymtab_include_list = (char **)
+                	  alloca ((includes_allocated *= 2) * sizeof (char *));
+                      memcpy ((PTR)psymtab_include_list, (PTR)orig,
+                          includes_used * sizeof (char *));
+              	    }
+
+		}
+  		psymfile_depth++;
+		continue;
+	      }
+
+	    case 'v':
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_STATIC,
+				   &objfile->static_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+	    case 'V':
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_STATIC,
+				   &objfile->global_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+
+	    case 'T':
+	      if (p != namestring)	/* a name is there, not just :T... */
+		{
+		  add_psymbol_to_list (namestring, p - namestring,
+				       STRUCT_NAMESPACE, LOC_TYPEDEF,
+				       &objfile->static_psymbols,
+				       CUR_SYMBOL_VALUE, 0,
+				       psymtab_language, objfile);
+		  if (p[2] == 't')
+		    {
+		      /* Also a typedef with the same name.  */
+		      add_psymbol_to_list (namestring, p - namestring,
+					   VAR_NAMESPACE, LOC_TYPEDEF,
+					   &objfile->static_psymbols,
+					   CUR_SYMBOL_VALUE, 0, psymtab_language,
+					   objfile);
+		      p += 1;
+		    }
+		  /* The semantics of C++ state that "struct foo { ... }"
+		     also defines a typedef for "foo".  Unfortuantely, cfront
+		     never makes the typedef when translating from C++ to C.
+		     We make the typedef here so that "ptype foo" works as
+		     expected for cfront translated code.  */
+		  else if (psymtab_language == language_cplus)
+		   {
+		      /* Also a typedef with the same name.  */
+		      add_psymbol_to_list (namestring, p - namestring,
+					   VAR_NAMESPACE, LOC_TYPEDEF,
+					   &objfile->static_psymbols,
+					   CUR_SYMBOL_VALUE, 0, psymtab_language,
+					   objfile);
+		   }
+		}
+	      goto check_enum;
+	    case 't':
+	      if (p != namestring)	/* a name is there, not just :T... */
+		{
+		  add_psymbol_to_list (namestring, p - namestring,
+				       VAR_NAMESPACE, LOC_TYPEDEF,
+				       &objfile->static_psymbols,
+				       CUR_SYMBOL_VALUE, 0,
+				       psymtab_language, objfile);
+		}
+	    check_enum:
+	      /* If this is an enumerated type, we need to
+		 add all the enum constants to the partial symbol
+		 table.  This does not cover enums without names, e.g.
+		 "enum {a, b} c;" in C, but fortunately those are
+		 rare.  There is no way for GDB to find those from the
+		 enum type without spending too much time on it.  Thus
+		 to solve this problem, the compiler needs to put out the
+		 enum in a nameless type.  GCC2 does this.  */
+
+	      /* We are looking for something of the form
+		 <name> ":" ("t" | "T") [<number> "="] "e" <size>
+		 {<constant> ":" <value> ","} ";".  */
+
+	      /* Skip over the colon and the 't' or 'T'.  */
+	      p += 2;
+	      /* This type may be given a number.  Also, numbers can come
+		 in pairs like (0,26).  Skip over it.  */
+	      while ((*p >= '0' && *p <= '9')
+		     || *p == '(' || *p == ',' || *p == ')'
+		     || *p == '=')
+		p++;
+
+	      if (*p++ == 'e')
+		{
+		  /* We have found an enumerated type. skip size */
+	          while (*p >= '0' && *p <= '9') p++;
+		  /* According to comments in read_enum_type
+		     a comma could end it instead of a semicolon.
+		     I don't know where that happens.
+		     Accept either.  */
+		  while (*p && *p != ';' && *p != ',')
+		    {
+		      char *q;
+
+		      /* Check for and handle cretinous dbx symbol name
+			 continuation! 
+		      if (*p == '\\')
+			p = next_symbol_text (objfile);
+		      */
+
+		      /* Point to the character after the name
+			 of the enum constant.  */
+		      for (q = p; *q && *q != ':'; q++)
+			;
+		      /* Note that the value doesn't matter for
+			 enum constants in psymtabs, just in symtabs.  */
+		      add_psymbol_to_list (p, q - p,
+					   VAR_NAMESPACE, LOC_CONST,
+					   &objfile->static_psymbols, 0,
+					   0, psymtab_language, objfile);
+		      /* Point past the name.  */
+		      p = q;
+		      /* Skip over the value.  */
+		      while (*p && *p != ',')
+			p++;
+		      /* Advance past the comma.  */
+		      if (*p)
+			p++;
+		    }
+		}
+	      continue;
+	    case 'c':
+	      /* Constant, e.g. from "const" in Pascal.  */
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_CONST,
+				   &objfile->static_psymbols, CUR_SYMBOL_VALUE,
+				   0, psymtab_language, objfile);
+	      continue;
+
+	    case 'f':
+	      CUR_SYMBOL_VALUE += ANOFFSET(section_offsets, SECT_OFF_TEXT);
+              if (pst && pst->textlow == 0)
+                pst->textlow = CUR_SYMBOL_VALUE;
+
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_BLOCK,
+				   &objfile->static_psymbols, CUR_SYMBOL_VALUE,
+				   0, psymtab_language, objfile);
+	      continue;
+
+	    case 'F':
+	      CUR_SYMBOL_VALUE += ANOFFSET(section_offsets, SECT_OFF_TEXT);
+              if (pst && pst->textlow == 0)
+                pst->textlow = CUR_SYMBOL_VALUE;
+
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_BLOCK,
+				   &objfile->global_psymbols, CUR_SYMBOL_VALUE,
+				   0, psymtab_language, objfile);
+	      continue;
+
+	    case 'p':
+	    case 'l':
+            case 's':
+	      continue;
+
+	    case ':':
+	      /* It is a C++ nested symbol.  We don't need to record it
+		 (I don't think); if we try to look up foo::bar::baz,
+		 then symbols for the symtab containing foo should get
+		 read in, I think.  */
+	      /* Someone says sun cc puts out symbols like
+		 /foo/baz/maclib::/usr/local/bin/maclib,
+		 which would get here with a symbol type of ':'.  */
+	      continue;
+
+	    default:
+	      /* Unexpected symbol descriptor.  The second and subsequent stabs
+		 of a continued stab can show up here.  The question is
+		 whether they ever can mimic a normal stab--it would be
+		 nice if not, since we certainly don't want to spend the
+		 time searching to the end of every string looking for
+		 a backslash.  */
+
+	      complain (&unknown_symchar_complaint, p[1]);
+	      continue;
+	    }
+
+	case N_SYM_RBRAC:
+	  CUR_SYMBOL_VALUE += ANOFFSET(section_offsets, SECT_OFF_TEXT);
+#ifdef HANDLE_RBRAC
+	  HANDLE_RBRAC(CUR_SYMBOL_VALUE);
+	  continue;
+#endif
+	case N_SYM_LBRAC:
+	  continue;
+
+	default:
+	  /* If we haven't found it yet, ignore it.  It's probably some
+	     new type we don't know about yet.  */
+	  complain (&unknown_symtype_complaint,
+		    local_hex_string ((unsigned long) bufp->n_type));
+	  continue;
+	}
+    }
+
+  DBX_SYMCOUNT (objfile) = symnum;
+
+  /* If there's stuff to be cleaned up, clean it up.  */
+  if (DBX_SYMCOUNT (objfile) > 0
+/*FIXME, does this have a bug at start address 0? */
+      && last_o_file_start
+      && objfile -> ei.entry_point < bufp->n_value
+      && objfile -> ei.entry_point >= last_o_file_start)
+    {
+      objfile -> ei.entry_file_lowpc = last_o_file_start;
+      objfile -> ei.entry_file_highpc = bufp->n_value;
+    }
+
+  if (pst)
+    {
+      os9k_end_psymtab (pst, psymtab_include_list, includes_used,
+		   symnum, end_of_text_addr,
+		   dependency_list, dependencies_used);
+    }
+/*
+  do_cleanups (back_to);
+*/
+}
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+
+static struct partial_symtab *
+os9k_start_psymtab (objfile, section_offsets,
+	       filename, textlow, ldsymoff,ldsymcnt,  global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     CORE_ADDR textlow;
+     int ldsymoff;
+     int ldsymcnt;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  struct partial_symtab *result =
+      start_psymtab_common(objfile, section_offsets,
+			   filename, textlow, global_syms, static_syms);
+
+  result->read_symtab_private = (char *)
+    obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc));
+
+  LDSYMOFF(result) = ldsymoff;
+  LDSYMCNT(result) = ldsymcnt;
+  result->read_symtab = os9k_psymtab_to_symtab;
+
+  /* Deduce the source language from the filename for this psymtab. */
+  psymtab_language = deduce_language_from_filename (filename);
+  return result;
+}
+
+/* Close off the current usage of PST.  
+   Returns PST or NULL if the partial symtab was empty and thrown away.
+   FIXME:  List variables and peculiarities of same.  */
+
+static struct partial_symtab *
+os9k_end_psymtab (pst, include_list, num_includes, capping_symbol_cnt,
+	     capping_text, dependency_list, number_dependencies)
+     struct partial_symtab *pst;
+     char **include_list;
+     int num_includes;
+     int capping_symbol_cnt;
+     CORE_ADDR capping_text;
+     struct partial_symtab **dependency_list;
+     int number_dependencies;
+     /* struct partial_symbol *capping_global, *capping_static; */
+{
+  int i;
+  struct partial_symtab *p1;
+  struct objfile *objfile = pst -> objfile;
+
+  if (capping_symbol_cnt != -1)
+      LDSYMCNT(pst) = capping_symbol_cnt - LDSYMCNT(pst);
+
+  /* Under Solaris, the N_SO symbols always have a value of 0,
+     instead of the usual address of the .o file.  Therefore,
+     we have to do some tricks to fill in texthigh and textlow.
+     The first trick is in partial-stab.h: if we see a static
+     or global function, and the textlow for the current pst
+     is still 0, then we use that function's address for 
+     the textlow of the pst.
+
+     Now, to fill in texthigh, we remember the last function seen
+     in the .o file (also in partial-stab.h).  Also, there's a hack in
+     bfd/elf.c and gdb/elfread.c to pass the ELF st_size field
+     to here via the misc_info field.  Therefore, we can fill in
+     a reliable texthigh by taking the address plus size of the
+     last function in the file.
+
+     Unfortunately, that does not cover the case where the last function
+     in the file is static.  See the paragraph below for more comments
+     on this situation.
+
+     Finally, if we have a valid textlow for the current file, we run
+     down the partial_symtab_list filling in previous texthighs that
+     are still unknown.  */
+
+  if (pst->texthigh == 0 && last_function_name) {
+    char *p;
+    int n;
+    struct minimal_symbol *minsym;
+
+    p = strchr (last_function_name, ':');
+    if (p == NULL)
+      p = last_function_name;
+    n = p - last_function_name;
+    p = alloca (n + 1);
+    strncpy (p, last_function_name, n);
+    p[n] = 0;
+    
+    minsym = lookup_minimal_symbol (p, NULL, objfile);
+
+    if (minsym) {
+      pst->texthigh = SYMBOL_VALUE_ADDRESS(minsym)+(long)MSYMBOL_INFO(minsym);
+    } else {
+      /* This file ends with a static function, and it's
+	 difficult to imagine how hard it would be to track down
+	 the elf symbol.  Luckily, most of the time no one will notice,
+	 since the next file will likely be compiled with -g, so
+	 the code below will copy the first fuction's start address 
+	 back to our texthigh variable.  (Also, if this file is the
+	 last one in a dynamically linked program, texthigh already
+	 has the right value.)  If the next file isn't compiled
+	 with -g, then the last function in this file winds up owning
+	 all of the text space up to the next -g file, or the end (minus
+	 shared libraries).  This only matters for single stepping,
+	 and even then it will still work, except that it will single
+	 step through all of the covered functions, instead of setting
+	 breakpoints around them as it usualy does.  This makes it
+	 pretty slow, but at least it doesn't fail.
+
+	 We can fix this with a fairly big change to bfd, but we need
+	 to coordinate better with Cygnus if we want to do that.  FIXME.  */
+    }
+    last_function_name = NULL;
+  }
+
+  /* this test will be true if the last .o file is only data */
+  if (pst->textlow == 0)
+    pst->textlow = pst->texthigh;
+
+  /* If we know our own starting text address, then walk through all other
+     psymtabs for this objfile, and if any didn't know their ending text
+     address, set it to our starting address.  Take care to not set our
+     own ending address to our starting address, nor to set addresses on
+     `dependency' files that have both textlow and texthigh zero.  */
+  if (pst->textlow) {
+    ALL_OBJFILE_PSYMTABS (objfile, p1) {
+      if (p1->texthigh == 0  && p1->textlow != 0 && p1 != pst) {
+	p1->texthigh = pst->textlow;
+	/* if this file has only data, then make textlow match texthigh */
+	if (p1->textlow == 0)
+	  p1->textlow = p1->texthigh;
+      }
+    }
+  }
+
+  /* End of kludge for patching Solaris textlow and texthigh.  */
+
+  pst->n_global_syms =
+    objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+  pst->n_static_syms =
+    objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+  pst->number_of_dependencies = number_dependencies;
+  if (number_dependencies)
+    {
+      pst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       number_dependencies * sizeof (struct partial_symtab *));
+      memcpy (pst->dependencies, dependency_list,
+	     number_dependencies * sizeof (struct partial_symtab *));
+    }
+  else
+    pst->dependencies = 0;
+
+  for (i = 0; i < num_includes; i++)
+    {
+      struct partial_symtab *subpst =
+	allocate_psymtab (include_list[i], objfile);
+
+      subpst->section_offsets = pst->section_offsets;
+      subpst->read_symtab_private =
+	  (char *) obstack_alloc (&objfile->psymbol_obstack,
+				  sizeof (struct symloc));
+      LDSYMOFF(subpst) =
+	LDSYMCNT(subpst) =
+	  subpst->textlow =
+	    subpst->texthigh = 0;
+
+      /* We could save slight bits of space by only making one of these,
+	 shared by the entire set of include files.  FIXME-someday.  */
+      subpst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       sizeof (struct partial_symtab *));
+      subpst->dependencies[0] = pst;
+      subpst->number_of_dependencies = 1;
+
+      subpst->globals_offset =
+	subpst->n_global_syms =
+	  subpst->statics_offset =
+	    subpst->n_static_syms = 0;
+
+      subpst->readin = 0;
+      subpst->symtab = 0;
+      subpst->read_symtab = pst->read_symtab;
+    }
+
+  sort_pst_symbols (pst);
+
+  /* If there is already a psymtab or symtab for a file of this name, 
+     remove it.
+     (If there is a symtab, more drastic things also happen.)
+     This happens in VxWorks.  */
+  free_named_symtabs (pst->filename);
+
+  if (num_includes == 0
+   && number_dependencies == 0
+   && pst->n_global_syms == 0
+   && pst->n_static_syms == 0) {
+    /* Throw away this psymtab, it's empty.  We can't deallocate it, since
+       it is on the obstack, but we can forget to chain it on the list.  */
+    /* Indicate that psymtab was thrown away.  */
+
+    discard_psymtab (pst);
+
+    pst = (struct partial_symtab *)NULL;
+  }
+  return pst;
+}
+
+static void
+os9k_psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *old_chain;
+  int i;
+  
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  /* Read in all partial symtabs on which this one is dependent */
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files that need to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...", pst->dependencies[i]->filename);
+	    wrap_here ("");		/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	os9k_psymtab_to_symtab_1 (pst->dependencies[i]);
+      }
+
+  if (LDSYMCNT(pst))		/* Otherwise it's a dummy */
+    {
+      /* Init stuff necessary for reading in symbols */
+      stabsread_init ();
+      buildsym_init ();
+      old_chain = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+      /* Read in this file's symbols */
+      os9k_read_ofile_symtab (pst);
+      sort_symtab_syms (pst->symtab);
+      do_cleanups (old_chain);
+    }
+
+  pst->readin = 1;
+}
+
+/* Read in all of the symbols for a given psymtab for real.
+   Be verbose about it if the user wants that.  */
+
+static void
+os9k_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  bfd *sym_bfd;
+
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	       pst->filename);
+      return;
+    }
+
+  if (LDSYMCNT(pst) || pst->number_of_dependencies)
+    {
+      /* Print the message now, before reading the string table,
+	 to avoid disconcerting pauses.  */
+      if (info_verbose)
+	{
+	  printf_filtered ("Reading in symbols for %s...", pst->filename);
+	  gdb_flush (gdb_stdout);
+	}
+
+      sym_bfd = pst->objfile->obfd;
+      os9k_psymtab_to_symtab_1 (pst);
+
+      /* Match with global symbols.  This only needs to be done once,
+         after all of the symtabs and dependencies have been read in.   */
+      scan_file_globals (pst->objfile);
+
+      /* Finish up the debug error message.  */
+      if (info_verbose)
+	printf_filtered ("done.\n");
+    }
+}
+
+/* Read in a defined section of a specific object file's symbols. */
+static void
+os9k_read_ofile_symtab (pst)
+     struct partial_symtab *pst;
+{
+  register struct internal_symstruct *bufp;
+  unsigned char type;
+  unsigned max_symnum;
+  register bfd *abfd;
+  struct objfile *objfile;
+  int sym_offset;		/* Offset to start of symbols to read */
+  CORE_ADDR text_offset;	/* Start of text segment for symbols */
+  int text_size;		/* Size of text segment for symbols */
+  struct section_offsets *section_offsets;
+  FILE *dbg_file;
+
+  objfile = pst->objfile;
+  sym_offset = LDSYMOFF(pst);
+  max_symnum = LDSYMCNT(pst);
+  text_offset = pst->textlow;
+  text_size = pst->texthigh - pst->textlow;
+  section_offsets = pst->section_offsets;
+
+  current_objfile = objfile;
+  subfile_stack = NULL;
+  last_source_file = NULL;
+
+  abfd = objfile->obfd;
+  dbg_file = objfile->auxf2;
+
+#if 0
+  /* It is necessary to actually read one symbol *before* the start
+     of this symtab's symbols, because the GCC_COMPILED_FLAG_SYMBOL
+     occurs before the N_SO symbol.
+     Detecting this in read_dbx_symtab
+     would slow down initial readin, so we look for it here instead. */
+  if (!processing_acc_compilation && sym_offset >= (int)symbol_size)
+    {
+      fseek (objefile->auxf2, sym_offset, SEEK_CUR);
+      fill_sym(objfile->auxf2, abfd);
+      bufp = symbuf;
+
+      processing_gcc_compilation = 0;
+      if (bufp->n_type == N_TEXT)
+	{
+	  if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 1;
+	  else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 2;
+	}
+
+      /* Try to select a C++ demangling based on the compilation unit
+	 producer. */
+
+      if (processing_gcc_compilation)
+	{
+	  if (AUTO_DEMANGLING)
+	    {
+	      set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+	    }
+	}
+    }
+  else
+    {
+      /* The N_SO starting this symtab is the first symbol, so we
+	 better not check the symbol before it.  I'm not this can
+	 happen, but it doesn't hurt to check for it.  */
+      bfd_seek (symfile_bfd, sym_offset, SEEK_CUR);
+      processing_gcc_compilation = 0;
+    }
+#endif /* 0 */
+
+  fseek(dbg_file, (long)sym_offset, 0);
+/*
+  if (bufp->n_type != (unsigned char)N_SYM_SYM)
+    error("First symbol in segment of executable not a source symbol");
+*/
+
+  for (symnum = 0; symnum < max_symnum; symnum++)
+    {
+      QUIT;			/* Allow this to be interruptable */
+      fill_sym(dbg_file, abfd);
+      bufp = symbuf;
+      type = bufp->n_type;
+
+      os9k_process_one_symbol ((int)type, (int)bufp->n_desc, 
+      (CORE_ADDR)bufp->n_value, bufp->n_strx, section_offsets, objfile);
+
+      /* We skip checking for a new .o or -l file; that should never
+         happen in this routine. */
+#if 0
+      else if (type == N_TEXT)
+	{
+	  /* I don't think this code will ever be executed, because
+	     the GCC_COMPILED_FLAG_SYMBOL usually is right before
+	     the N_SO symbol which starts this source file.
+	     However, there is no reason not to accept
+	     the GCC_COMPILED_FLAG_SYMBOL anywhere.  */
+
+	  if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 1;
+	  else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
+	    processing_gcc_compilation = 2;
+
+	  if (AUTO_DEMANGLING)
+	    {
+	      set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
+	    }
+	}
+      else if (type & N_EXT || type == (unsigned char)N_TEXT
+	       || type == (unsigned char)N_NBTEXT
+	       ) {
+	  /* Global symbol: see if we came across a dbx defintion for
+	     a corresponding symbol.  If so, store the value.  Remove
+	     syms from the chain when their values are stored, but
+	     search the whole chain, as there may be several syms from
+	     different files with the same name. */
+	  /* This is probably not true.  Since the files will be read
+	     in one at a time, each reference to a global symbol will
+	     be satisfied in each file as it appears. So we skip this
+	     section. */
+	  ;
+        }
+#endif /* 0 */
+    }
+
+  current_objfile = NULL;
+
+  /* In a Solaris elf file, this variable, which comes from the
+     value of the N_SO symbol, will still be 0.  Luckily, text_offset,
+     which comes from pst->textlow is correct. */
+  if (last_source_start_addr == 0)
+    last_source_start_addr = text_offset;
+  pst->symtab = end_symtab (text_offset + text_size, objfile, SECT_OFF_TEXT);
+  end_stabs ();
+}
+
+
+/* This handles a single symbol from the symbol-file, building symbols
+   into a GDB symtab.  It takes these arguments and an implicit argument.
+
+   TYPE is the type field of the ".stab" symbol entry.
+   DESC is the desc field of the ".stab" entry.
+   VALU is the value field of the ".stab" entry.
+   NAME is the symbol name, in our address space.
+   SECTION_OFFSETS is a set of amounts by which the sections of this object
+          file were relocated when it was loaded into memory.
+          All symbols that refer
+	  to memory locations need to be offset by these amounts.
+   OBJFILE is the object file from which we are reading symbols.
+ 	       It is used in end_symtab.  */
+
+static void
+os9k_process_one_symbol (type, desc, valu, name, section_offsets, objfile)
+     int type, desc;
+     CORE_ADDR valu;
+     char *name;
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  register struct context_stack *new;
+  /* The stab type used for the definition of the last function.
+     N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers.  */
+  static int function_stab_type = 0;
+
+#if 0
+  /* Something is wrong if we see real data before
+     seeing a source file name.  */
+  if (last_source_file == NULL && type != (unsigned char)N_SO)
+    {
+      /* Ignore any symbols which appear before an N_SO symbol.
+	 Currently no one puts symbols there, but we should deal
+	 gracefully with the case.  A complain()t might be in order,
+	 but this should not be an error ().  */
+      return;
+    }
+#endif /* 0 */
+
+  switch (type)
+    {
+    case N_SYM_LBRAC:
+      /* On most machines, the block addresses are relative to the
+	 N_SO, the linker did not relocate them (sigh).  */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT); 
+      new = push_context (desc, valu);
+      break;
+
+    case N_SYM_RBRAC:
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT); 
+      new = pop_context();
+
+#if !defined (OS9K_VARIABLES_INSIDE_BLOCK)
+#define OS9K_VARIABLES_INSIDE_BLOCK(desc, gcc_p) 1
+#endif
+
+      if (!OS9K_VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
+	local_symbols = new->locals;
+
+      if (context_stack_depth > 1)
+	{
+	  /* This is not the outermost LBRAC...RBRAC pair in the function,
+	     its local symbols preceded it, and are the ones just recovered
+	     from the context stack.  Define the block for them (but don't
+	     bother if the block contains no symbols.  Should we complain
+	     on blocks without symbols?  I can't think of any useful purpose
+	     for them).  */
+	  if (local_symbols != NULL)
+	    {
+	      /* Muzzle a compiler bug that makes end < start.  (which
+		 compilers?  Is this ever harmful?).  */
+	      if (new->start_addr > valu)
+		{
+		  complain (&lbrac_rbrac_complaint);
+		  new->start_addr = valu;
+		}
+	      /* Make a block for the local symbols within.  */
+	      finish_block (0, &local_symbols, new->old_blocks,
+			    new->start_addr, valu, objfile);
+	    }
+	}
+      else
+	{
+	  if (context_stack_depth == 0)
+	    {
+	      within_function = 0;
+	      /* Make a block for the local symbols within.  */
+	      finish_block (new->name, &local_symbols, new->old_blocks,
+			new->start_addr, valu, objfile);
+	    }
+	  else
+	    {
+	      /* attach local_symbols to the end of new->locals */
+	      if (!new->locals) new->locals = local_symbols;
+	      else {
+		struct pending *p;
+
+	        p = new->locals;
+	        while (p->next) p = p->next; 
+	        p->next = local_symbols;
+	      }
+	    }
+	}
+
+      if (OS9K_VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
+	/* Now pop locals of block just finished.  */
+	local_symbols = new->locals;
+      break;
+
+
+    case N_SYM_SLINE:
+      /* This type of "symbol" really just records
+	 one line-number -- core-address correspondence.
+	 Enter it in the line list for this symbol table. */
+      /* Relocate for dynamic loading and for ELF acc fn-relative syms.  */
+      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT); 
+      /* FIXME: loses if sizeof (char *) > sizeof (int) */
+      record_line (current_subfile, (int)name, valu);
+      break;
+
+    /* The following symbol types need to have the appropriate offset added
+       to their value; then we process symbol definitions in the name.  */
+    case N_SYM_SYM:
+
+      if (name)
+	{
+	  char deftype;
+	  char *dirn, *n;
+	  char *p = strchr (name, ':');
+	  if (p == NULL)
+	    deftype = '\0';
+	  else
+	    deftype = p[1];
+
+
+	  switch (deftype)
+	    {
+	    case 'S':
+      	      valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      n = strrchr(name, '/');
+	      if (n != NULL) {
+		*n = '\0';
+		n++;
+		dirn = name;
+	      } else {
+		n = name;
+		dirn = NULL;
+	      }
+	      *p = '\0';
+	      if (symfile_depth++ == 0) {
+		if (last_source_file) {
+          	  end_symtab (valu, objfile, SECT_OFF_TEXT);
+		  end_stabs ();
+		}
+		start_stabs ();
+		os9k_stabs = 1;
+		start_symtab (n, dirn, valu);
+		record_debugformat ("OS9");
+	      } else {
+		push_subfile();
+		start_subfile (n, dirn!=NULL ? dirn : current_subfile->dirname);
+	      }
+	      break;
+
+	    case 'f':
+	    case 'F':
+              valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	      function_stab_type = type;
+
+	      within_function = 1;
+	      new = push_context (0, valu);
+	      new->name = define_symbol (valu, name, desc, type, objfile);
+	      break;
+
+	    case 'V':
+	    case 'v':
+              valu += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	      define_symbol (valu, name, desc, type, objfile);
+	      break;
+
+	    default:
+	      define_symbol (valu, name, desc, type, objfile);
+	      break;
+	    }
+	}
+      break;
+
+    case N_SYM_SE:
+	if (--symfile_depth != 0)
+	  start_subfile(pop_subfile(), current_subfile->dirname);
+      break;
+
+    default:
+      complain (&unknown_symtype_complaint,
+		local_hex_string((unsigned long) type));
+      /* FALLTHROUGH */
+      break;
+
+    case N_SYM_CMPLR:
+      break;
+    }
+  previous_stab_code = type;
+}
+
+static struct sym_fns os9k_sym_fns =
+{
+  bfd_target_os9k_flavour,
+  os9k_new_init,	/* sym_new_init: init anything gbl to entire symtab */
+  os9k_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  os9k_symfile_read,	/* sym_read: read a symbol file into symtab */
+  os9k_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  default_symfile_offsets,
+			/* sym_offsets: parse user's offsets to internal form*/
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_os9kread ()
+{
+  add_symtab_fns(&os9k_sym_fns);
+}
diff --git a/gdb/osf-share/AT386/cma_thread_io.h b/gdb/osf-share/AT386/cma_thread_io.h
new file mode 100644
index 0000000..a90dba1
--- /dev/null
+++ b/gdb/osf-share/AT386/cma_thread_io.h
@@ -0,0 +1,457 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for thread synchrounous I/O
+ */
+
+#ifndef CMA_THREAD_IO
+#define CMA_THREAD_IO
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_config.h>
+#include <sys/file.h>
+#include <cma.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <cma_init.h>
+#include <cma_errors.h>
+
+/*
+ * CONSTANTS
+ */
+
+/*
+ * Define symbols which indicate whether to compile code for obsolete 
+ * "non-blocking mode" flags:  FNDELAY and FNBLOCK.  If the obsolete
+ * symbols are defined, and if their replacement symbols are defined 
+ * and are different or if they are undefined, then define a symbol
+ * that says to compile the code in; otherwise no code will be compiled
+ * for these obsolete symbols.
+ */
+#ifdef FNDELAY
+# ifdef O_NDELAY
+#  if O_NDELAY != FNDELAY
+#   define _CMA_FNDELAY_
+#  endif
+# else
+#  define _CMA_FNDELAY_
+# endif
+#endif
+
+#ifdef FNBLOCK
+# ifdef O_NONBLOCK
+#  if O_NONBLOCK != FNBLOCK
+#   define _CMA_FNBLOCK_
+#  endif
+# else
+#  define _CMA_FNBLOCK_
+# endif
+#endif
+
+
+extern cma_t_boolean cma_is_open(int);
+/*
+ * Maximum number of files (ie, max_fd+1)
+ */
+#define cma__c_mx_file	FD_SETSIZE
+
+/*
+ * Number of bits per file descriptor bit mask (ie number of bytes * bits/byte)
+ */
+#define cma__c_nbpm	NFDBITS
+
+/*
+ * TYPE DEFINITIONS
+ */
+
+typedef enum CMA__T_IO_TYPE {
+    cma__c_io_read   = 0,
+    cma__c_io_write  = 1,
+    cma__c_io_except = 2
+    } cma__t_io_type;
+#define cma__c_max_io_type	2
+
+/*
+ * From our local <sys/types.h>:
+ *
+ *  typedef long    fd_mask;
+ *
+ *  typedef struct fd_set {
+ *          fd_mask fds_bits[howmany(FD_SETSIZE, NFDBITS)];
+ *  } fd_set;
+ *
+ */
+typedef fd_mask cma__t_mask;
+typedef fd_set  cma__t_file_mask;
+
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * Maximum number of files (ie, max_fd+1) as determined by getdtablesize().
+ */
+extern int	cma__g_mx_file;
+
+/*
+ * Number of submasks (ie "int" sized chunks) per file descriptor mask as
+ * determined by getdtablesize().
+ */
+extern int	cma__g_nspm;
+
+/*
+ * MACROS
+ */
+
+/*
+ * Define a constant for the errno value which indicates that the requested
+ * operation was not performed because it would block the process.
+ */
+# define cma__is_blocking(s) \
+    ((s == EAGAIN) || (s == EWOULDBLOCK) || (s == EINPROGRESS) || \
+     (s == EALREADY) || (s == EDEADLK))
+
+/*
+*	It is necessary to issue an I/O function, before calling cma__io_wait()
+*	in the following cases:
+*
+*		*	This file descriptor has been set non-blocking by CMA
+*		*	This file descriptor has been set non-blocking by the user.
+*/
+
+#define cma__issue_io_call(fd)					\
+	( (cma__g_file[fd]->non_blocking) || \
+	  (cma__g_file[fd]->user_fl.user_non_blocking) )
+
+
+#define cma__set_user_nonblocking(flags) \
+
+/*
+ * Determine if the file is open
+ */
+/*
+ * If the file gets closed while waiting for the mutex cma__g_file[rfd]
+ * gets set to null. This results in a crash if NDEBUG is set to 0 
+ * since cma__int_lock tries to dereference it to set the mutex ownership 
+ * after it gets the mutex. The following will still set the ownership
+ * in cma__int_lock so we'll set it back to noone if cma__g_file is null
+ * when we come back just in case it matters. It shouldn't since its no
+ * longer in use but..... 
+ * Callers of this should recheck cma__g_file after the reservation to
+ * make sure continueing makes sense.
+ */
+#define cma__fd_reserve(rfd) 	\
+		{ \
+		cma__t_int_mutex *__mutex__; \
+		__mutex__ = cma__g_file[rfd]->mutex; \
+		cma__int_lock (__mutex__); \
+		if(cma__g_file[rfd] == (cma__t_file_obj *)cma_c_null_ptr) \
+			cma__int_unlock(__mutex__); \
+		}
+		
+
+/*
+ * Unreserve a file descriptor
+ */
+#define cma__fd_unreserve(ufd)	cma__int_unlock (cma__g_file[ufd]->mutex)
+
+/*
+ * AND together two select file descriptor masks
+ */
+#define cma__fdm_and(target,a,b)					\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] & (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Clear a bit in a select file descriptor mask
+ *
+ * FD_CLR(n, p)  :=  ((p)->fds_bits[(n)/NFDBITS] &= ~(1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_clr_bit(n,p)	FD_CLR (n, p)
+
+/*
+ * Copy the contents of one file descriptor mask into another.  If the 
+ * destination operand is null, do nothing; if the source operand is null, 
+ * simply zero the destination.
+ */
+#define cma__fdm_copy(src,dst,nfds) {					\
+	if (dst)							\
+	    if (src) {							\
+		cma__t_mask *__s__ = (cma__t_mask *)(src);		\
+		cma__t_mask *__d__ = (cma__t_mask *)(dst);		\
+		int __i__;						\
+		for (__i__ = 0; __i__ < (nfds); __i__ += cma__c_nbpm)	\
+		    *__d__++ = *__s__++;				\
+		}							\
+	    else							\
+		cma__fdm_zero (dst);					\
+	    }
+
+/*
+ * To increment count for each bit set in fd - mask
+ */
+#define cma__fdm_count_bits(map,count)					\
+	{								\
+	int	__i__ = cma__g_nspm;					\
+	while (__i__--) {						\
+	    cma__t_mask    __tm__;				        \
+	    __tm__ = (map)->fds_bits[__i__];				\
+	    while(__tm__) {						\
+		(count)++;						\
+		__tm__ &= ~(__tm__ & (-__tm__)); /* Assumes 2's comp */	\
+		}							\
+	    }								\
+	}
+
+/*
+ * Test if a bit is set in a select file descriptor mask
+ *
+ * FD_ISSET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] & (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_is_set(n,p)	FD_ISSET (n, p)
+
+/*
+ * OR together two select file descriptor masks
+ */
+#define cma__fdm_or(target,a,b)						\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] | (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Set a bit in a select file descriptor mask
+ * 
+ * FD_SET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] |= (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_set_bit(n,p)	FD_SET (n, p)
+
+/*
+ * Clear a select file descriptor mask.
+ */
+#define cma__fdm_zero(n)						\
+	cma__memset ((char *) n, 0, cma__g_nspm * sizeof(cma__t_mask))
+
+
+
+/*
+ * CMA "thread-synchronous" I/O read/write operations
+ */
+
+    /*
+     * Since all CMA "thread-synchronous" I/O (read or write) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Check that the file descriptor is a legitimate value.
+     *	2. Check that the entry in the CMA file "database" which corresponds to 
+     *	    the file descriptor indicates that the "file" was "opened" by CMA.
+     *  3. Reserve the file, to serialized access to files.  This not only 
+     *	    simplifies things, but also defends against non-reentrancy.
+     *  4. If the "file" is "set" for non-blocking I/O, check if we
+     *      have actually set the file non-blocking yet, and if not do so.
+     *	    Then, issue the I/O operantion.
+     *	    Success or failure is returned immediately, after unreserving the 
+     *	    file.  If the error indicates that the operation would have caused
+     *	    the process to block, continue to the next step.
+     *	5. The I/O prolog adds this "file" to the global bit mask, which 
+     *	    represents all "files" which have threads waiting to perform I/O on 
+     *	    them, and causes the thread to block on the condition variable for
+     *	    this "file".  Periodically, a select is done on this global bit 
+     *	    mask, and the condition variables corresponding to "files" which 
+     *	    are ready for I/O are signaled, releasing those waiting threads to
+     *	    perform their I/O.
+     *  6. When the thread returns from the I/O prolog, it can (hopefully) 
+     *	    perform its operation without blocking the process.
+     *	7. The I/O epilog clears the bit in the global mask and/or signals the 
+     *	    the next thread waiting for this "file", as appropriate.
+     *  8. If the I/O failed, continue to loop.
+     *	9. Finally, the "file" is unreserved, as we're done with it, and the
+     *	    result of the operation is returned.
+     *
+     *
+     * Note:  currently, we believe that timeslicing which is based on the
+     *	    virtual-time timer does not cause system calls to return EINTR.  
+     *	    Threfore, any EINTR returns are relayed directly to the caller.
+     *	    On platforms which do not support a virtual-time timer, the code
+     *	    should probably catch EINTR returns and restart the system call.
+     */
+
+/*
+ * This macro is used for both read-type and write-type functions.
+ *
+ * Note:  the second call to "func" may require being bracketed in a
+ *	  cma__interrupt_disable/cma__interrupt_enable pair, but we'll 
+ *	  wait and see if this is necessary.
+ */
+#define cma__ts_func(func,fd,arglist,type,post_process)	{ \
+    cma_t_integer   __res__; \
+    cma_t_boolean   __done__ = cma_c_false; \
+    if ((fd < 0) || (fd >= cma__g_mx_file)) return (cma__set_errno (EBADF), -1); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    cma__fd_reserve (fd); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    if (cma__issue_io_call(fd)) {\
+	if ((!cma__g_file[fd]->set_non_blocking) && \
+		(cma__g_file[fd]->non_blocking == cma_c_true)) \
+	    cma__set_nonblocking(fd); \
+        cma__interrupt_disable (0); \
+	TRY { \
+	    __res__ = func arglist; \
+	    } \
+	CATCH_ALL { \
+	    cma__interrupt_enable (0); \
+	    cma__fd_unreserve (fd); \
+	    RERAISE; \
+	    } \
+	ENDTRY \
+        cma__interrupt_enable (0); \
+	if ((__res__ != -1) \
+		|| (!cma__is_blocking (errno)) \
+		|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+	    __done__ = cma_c_true; \
+	} \
+    if (__done__) { \
+	cma__fd_unreserve (fd); \
+	} \
+    else { \
+	TRY { \
+	    cma__io_prolog (type, fd); \
+	    while (!__done__) { \
+		cma__io_wait (type, fd); \
+		__res__ = func arglist; \
+		if ((__res__ != -1) \
+			|| (!cma__is_blocking (errno)) \
+			|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+		    __done__ = cma_c_true; \
+		} \
+	    } \
+	FINALLY { \
+	    cma__io_epilog (type, fd); \
+	    cma__fd_unreserve (fd); \
+	    } \
+	ENDTRY \
+	} \
+    if (__res__ != -1)  post_process; \
+    return __res__;  \
+    }
+
+    /*
+     * Since most CMA "thread-synchronous" I/O ("open"-type) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Issue the open function.
+     *	2. If the value returned indicates an error, return it to the caller.
+     *  3. If the file descriptor returned is larger than what we think is the
+     *	    maximum value (ie if it is too big for our database) then bugcheck.
+     *  4. "Open" the "file" in the CMA file database.
+     *	5. Return the file descriptor value to the caller.
+     *
+     * FIX-ME: for the time being, if the I/O operation returns EINTR, we 
+     *	    simply return it to the caller; eventually, we should catch this 
+     *	    and "do the right thing" (if we can figure out what that is).
+     */
+
+/*
+ * This macro is used for all "open"-type functions which return a single file
+ * desciptor by immediate value.
+ */
+#define cma__ts_open(func,arglist,post_process)  {		\
+    int	__fd__;							\
+    TRY {							\
+	cma__int_init ();					\
+	cma__int_lock (cma__g_io_data_mutex);			\
+	__fd__ = func arglist;					\
+	cma__int_unlock (cma__g_io_data_mutex);			\
+	if (__fd__ >= 0 && __fd__ < cma__g_mx_file)		\
+	    post_process;					\
+	}							\
+    CATCH_ALL							\
+	{							\
+	cma__set_errno (EBADF);					\
+	__fd__ = -1;						\
+	}							\
+    ENDTRY							\
+    if (__fd__ >= cma__g_mx_file)				\
+	cma__bugcheck ("cma__ts_open:  fd is too large");	\
+    return __fd__;						\
+    }
+/*
+ * This macro is used for all "open"-type functions which return a pair of file
+ * desciptors by reference parameter.
+ */
+#define cma__ts_open2(func,fdpair,arglist,post_process)  {		\
+    int	    __res__;							\
+    TRY {								\
+	cma__int_init ();						\
+	cma__int_lock (cma__g_io_data_mutex);				\
+	__res__ = func arglist;						\
+	cma__int_unlock (cma__g_io_data_mutex);				\
+	if (__res__ >= 0 && fdpair[0] < cma__g_mx_file			\
+		&& fdpair[1] < cma__g_mx_file)				\
+	    post_process;						\
+	}								\
+    CATCH_ALL								\
+	{								\
+	cma__set_errno (EBADF);						\
+	__res__ = -1;							\
+	}								\
+    ENDTRY								\
+    if ((fdpair[0] >= cma__g_mx_file) || (fdpair[1] >= cma__g_mx_file)) \
+	cma__bugcheck ("cma__ts_open2:  one of fd's is too large"); \
+    return __res__;							\
+    }
+
+/*
+ * INTERNAL INTERFACES
+ */
+extern void cma__close_general (int);
+
+extern void cma__init_thread_io (void);
+
+extern cma_t_boolean cma__io_available (cma__t_io_type,int,struct timeval *);
+
+extern void cma__io_epilog (cma__t_io_type,int);
+
+extern void cma__io_prolog (cma__t_io_type,int);
+
+extern void cma__io_wait (cma__t_io_type,int);
+
+extern void cma__open_general (int);
+
+extern void cma__reinit_thread_io (int);
+
+extern void cma__set_nonblocking (int);
+
+extern void cma__set_user_nonblock_flags (int,int);
+
+extern cma_t_boolean cma__is_open (int);
+
+
+#endif
diff --git a/gdb/osf-share/HP800/cma_thread_io.h b/gdb/osf-share/HP800/cma_thread_io.h
new file mode 100644
index 0000000..e9bef3b
--- /dev/null
+++ b/gdb/osf-share/HP800/cma_thread_io.h
@@ -0,0 +1,432 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *
+ *	Header file for thread synchrounous I/O
+ */
+
+#ifndef CMA_THREAD_IO
+#define CMA_THREAD_IO
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_config.h>
+#include <sys/file.h>
+#include <cma.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <cma_init.h>
+#include <cma_errors.h>
+
+/*
+ * CONSTANTS
+ */
+
+
+
+/*
+ * Maximum number of files (ie, max_fd+1)
+ */
+#define cma__c_mx_file	FD_SETSIZE
+
+/*
+ * Number of bits per file descriptor bit mask (ie number of bytes * bits/byte)
+ */
+#define cma__c_nbpm	NFDBITS
+
+/*
+ * TYPE DEFINITIONS
+ */
+
+typedef enum CMA__T_IO_TYPE {
+    cma__c_io_read   = 0,
+    cma__c_io_write  = 1,
+    cma__c_io_except = 2
+    } cma__t_io_type;
+#define cma__c_max_io_type	2
+
+/*
+ * From our local <sys/types.h>:
+ *
+ *  typedef long    fd_mask;
+ *
+ *  typedef struct fd_set {
+ *          fd_mask fds_bits[howmany(FD_SETSIZE, NFDBITS)];
+ *  } fd_set;
+ *
+ */
+typedef fd_mask cma__t_mask;
+typedef fd_set  cma__t_file_mask;
+
+
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * Maximum number of files (ie, max_fd+1) as determined by getdtablesize().
+ */
+extern int	cma__g_mx_file;
+
+/*
+ * Number of submasks (ie "int" sized chunks) per file descriptor mask as
+ * determined by getdtablesize().
+ */
+extern int	cma__g_nspm;
+
+/*
+ * MACROS
+ */
+
+/*
+ * Define a constant for the errno value which indicates that the requested
+ * operation was not performed because it would block the process.
+ */
+# define cma__is_blocking(s) \
+    ((s == EAGAIN) || (s == EWOULDBLOCK) || (s == EINPROGRESS) || \
+     (s == EALREADY) || (s == EDEADLK))
+
+/*
+*	It is necessary to issue an I/O function, before calling cma__io_wait()
+*	in the following cases:
+*
+*		*	This file descriptor has been set non-blocking by CMA
+*		*	This file descriptor has been set non-blocking by the user.
+*/
+
+#define cma__issue_io_call(fd)					\
+	( (cma__g_file[fd]->non_blocking) || \
+	  (cma__g_file[fd]->user_fl.user_non_blocking) )
+
+
+#define cma__set_user_nonblocking(flags) \
+
+/*
+ * Determine if the file is open
+ */
+/*
+ * If the file gets closed while waiting for the mutex cma__g_file[rfd]
+ * gets set to null. This results in a crash if NDEBUG is set to 0 
+ * since cma__int_lock tries to dereference it to set the mutex ownership 
+ * after it gets the mutex. The following will still set the ownership
+ * in cma__int_lock so we'll set it back to noone if cma__g_file is null
+ * when we come back just in case it matters. It shouldn't since its no
+ * longer in use but..... 
+ * Callers of this should recheck cma__g_file after the reservation to
+ * make sure continueing makes sense.
+ */
+#define cma__fd_reserve(rfd) 	\
+		{ \
+		cma__t_int_mutex *__mutex__; \
+		__mutex__ = cma__g_file[rfd]->mutex; \
+		cma__int_lock (__mutex__); \
+		if(cma__g_file[rfd] == (cma__t_file_obj *)cma_c_null_ptr) \
+			cma__int_unlock(__mutex__); \
+		}
+		
+
+/*
+ * Unreserve a file descriptor
+ */
+#define cma__fd_unreserve(ufd)	cma__int_unlock (cma__g_file[ufd]->mutex)
+
+/*
+ * AND together two select file descriptor masks
+ */
+#define cma__fdm_and(target,a,b)					\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] & (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Clear a bit in a select file descriptor mask
+ *
+ * FD_CLR(n, p)  :=  ((p)->fds_bits[(n)/NFDBITS] &= ~(1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_clr_bit(n,p)	FD_CLR (n, p)
+
+/*
+ * Copy the contents of one file descriptor mask into another.  If the 
+ * destination operand is null, do nothing; if the source operand is null, 
+ * simply zero the destination.
+ */
+#define cma__fdm_copy(src,dst,nfds) {					\
+	if (dst)							\
+	    if (src) {							\
+		cma__t_mask *__s__ = (cma__t_mask *)(src);		\
+		cma__t_mask *__d__ = (cma__t_mask *)(dst);		\
+		int __i__;						\
+		for (__i__ = 0; __i__ < (nfds); __i__ += cma__c_nbpm)	\
+		    *__d__++ = *__s__++;				\
+		}							\
+	    else							\
+		cma__fdm_zero (dst);					\
+	    }
+
+/*
+ * To increment count for each bit set in fd - mask
+ */
+#define cma__fdm_count_bits(map,count)					\
+	{								\
+	int	__i__ = cma__g_nspm;					\
+	while (__i__--) {						\
+	    cma__t_mask    __tm__;				        \
+	    __tm__ = (map)->fds_bits[__i__];				\
+	    while(__tm__) {						\
+		(count)++;						\
+		__tm__ &= ~(__tm__ & (-__tm__)); /* Assumes 2's comp */	\
+		}							\
+	    }								\
+	}
+
+/*
+ * Test if a bit is set in a select file descriptor mask
+ *
+ * FD_ISSET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] & (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_is_set(n,p)	FD_ISSET (n, p)
+
+/*
+ * OR together two select file descriptor masks
+ */
+#define cma__fdm_or(target,a,b)						\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] | (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Set a bit in a select file descriptor mask
+ * 
+ * FD_SET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] |= (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_set_bit(n,p)	FD_SET (n, p)
+
+/*
+ * Clear a select file descriptor mask.
+ */
+#define cma__fdm_zero(n)						\
+	cma__memset ((char *) n, 0, cma__g_nspm * sizeof(cma__t_mask))
+
+
+
+
+
+/*
+ * CMA "thread-synchronous" I/O read/write operations
+ */
+
+    /*
+     * Since all CMA "thread-synchronous" I/O (read or write) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Check that the file descriptor is a legitimate value.
+     *	2. Check that the entry in the CMA file "database" which corresponds to 
+     *	    the file descriptor indicates that the "file" was "opened" by CMA.
+     *  3. Reserve the file, to serialized access to files.  This not only 
+     *	    simplifies things, but also defends against non-reentrancy.
+     *  4. If the "file" is "set" for non-blocking I/O, check if we
+     *      have actually set the file non-blocking yet, and if not do so.
+     *	    Then, issue the I/O operantion.
+     *	    Success or failure is returned immediately, after unreserving the 
+     *	    file.  If the error indicates that the operation would have caused
+     *	    the process to block, continue to the next step.
+     *	5. The I/O prolog adds this "file" to the global bit mask, which 
+     *	    represents all "files" which have threads waiting to perform I/O on 
+     *	    them, and causes the thread to block on the condition variable for
+     *	    this "file".  Periodically, a select is done on this global bit 
+     *	    mask, and the condition variables corresponding to "files" which 
+     *	    are ready for I/O are signaled, releasing those waiting threads to
+     *	    perform their I/O.
+     *  6. When the thread returns from the I/O prolog, it can (hopefully) 
+     *	    perform its operation without blocking the process.
+     *	7. The I/O epilog clears the bit in the global mask and/or signals the 
+     *	    the next thread waiting for this "file", as appropriate.
+     *  8. If the I/O failed, continue to loop.
+     *	9. Finally, the "file" is unreserved, as we're done with it, and the
+     *	    result of the operation is returned.
+     *
+     *
+     * Note:  currently, we believe that timeslicing which is based on the
+     *	    virtual-time timer does not cause system calls to return EINTR.  
+     *	    Threfore, any EINTR returns are relayed directly to the caller.
+     *	    On platforms which do not support a virtual-time timer, the code
+     *	    should probably catch EINTR returns and restart the system call.
+     */
+
+/*
+ * This macro is used for both read-type and write-type functions.
+ *
+ * Note:  the second call to "func" may require being bracketed in a
+ *	  cma__interrupt_disable/cma__interrupt_enable pair, but we'll 
+ *	  wait and see if this is necessary.
+ */
+#define cma__ts_func(func,fd,arglist,type,post_process)	{ \
+    cma_t_integer   __res__; \
+    cma_t_boolean   __done__ = cma_c_false; \
+    if ((fd < 0) || (fd >= cma__g_mx_file)) return (cma__set_errno (EBADF), -1); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    cma__fd_reserve (fd); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    if (cma__issue_io_call(fd)) {\
+	if ((!cma__g_file[fd]->set_non_blocking) && \
+		(cma__g_file[fd]->non_blocking == cma_c_true)) \
+	    cma__set_nonblocking(fd); \
+        cma__interrupt_disable (0); \
+	TRY { \
+	    __res__ = func arglist; \
+	    } \
+	CATCH_ALL { \
+	    cma__interrupt_enable (0); \
+	    cma__fd_unreserve (fd); \
+	    RERAISE; \
+	    } \
+	ENDTRY \
+        cma__interrupt_enable (0); \
+	if ((__res__ != -1) \
+		|| (!cma__is_blocking (errno)) \
+		|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+	    __done__ = cma_c_true; \
+	} \
+    if (__done__) { \
+	cma__fd_unreserve (fd); \
+	} \
+    else { \
+	TRY { \
+	    cma__io_prolog (type, fd); \
+	    while (!__done__) { \
+		cma__io_wait (type, fd); \
+		__res__ = func arglist; \
+		if ((__res__ != -1) \
+			|| (!cma__is_blocking (errno)) \
+			|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+		    __done__ = cma_c_true; \
+		} \
+	    } \
+	FINALLY { \
+	    cma__io_epilog (type, fd); \
+	    cma__fd_unreserve (fd); \
+	    } \
+	ENDTRY \
+	} \
+    if (__res__ != -1)  post_process; \
+    return __res__;  \
+    }
+
+    /*
+     * Since most CMA "thread-synchronous" I/O ("open"-type) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Issue the open function.
+     *	2. If the value returned indicates an error, return it to the caller.
+     *  3. If the file descriptor returned is larger than what we think is the
+     *	    maximum value (ie if it is too big for our database) then bugcheck.
+     *  4. "Open" the "file" in the CMA file database.
+     *	5. Return the file descriptor value to the caller.
+     *
+     * FIX-ME: for the time being, if the I/O operation returns EINTR, we 
+     *	    simply return it to the caller; eventually, we should catch this 
+     *	    and "do the right thing" (if we can figure out what that is).
+     */
+
+/*
+ * This macro is used for all "open"-type functions which return a single file
+ * desciptor by immediate value.
+ */
+#define cma__ts_open(func,arglist,post_process)  {		\
+    int	__fd__;							\
+    TRY {							\
+	cma__int_init ();					\
+	cma__int_lock (cma__g_io_data_mutex);			\
+	__fd__ = func arglist;					\
+	cma__int_unlock (cma__g_io_data_mutex);			\
+	if (__fd__ >= 0 && __fd__ < cma__g_mx_file)		\
+	    post_process;					\
+	}							\
+    CATCH_ALL							\
+	{							\
+	cma__set_errno (EBADF);					\
+	__fd__ = -1;						\
+	}							\
+    ENDTRY							\
+    if (__fd__ >= cma__g_mx_file)				\
+	cma__bugcheck ("cma__ts_open:  fd is too large");	\
+    return __fd__;						\
+    }
+/*
+ * This macro is used for all "open"-type functions which return a pair of file
+ * desciptors by reference parameter.
+ */
+#define cma__ts_open2(func,fdpair,arglist,post_process)  {		\
+    int	    __res__;							\
+    TRY {								\
+	cma__int_init ();						\
+	cma__int_lock (cma__g_io_data_mutex);				\
+	__res__ = func arglist;						\
+	cma__int_unlock (cma__g_io_data_mutex);				\
+	if (__res__ >= 0 && fdpair[0] < cma__g_mx_file			\
+		&& fdpair[1] < cma__g_mx_file)				\
+	    post_process;						\
+	}								\
+    CATCH_ALL								\
+	{								\
+	cma__set_errno (EBADF);						\
+	__res__ = -1;							\
+	}								\
+    ENDTRY								\
+    if ((fdpair[0] >= cma__g_mx_file) || (fdpair[1] >= cma__g_mx_file)) \
+	cma__bugcheck ("cma__ts_open2:  one of fd's is too large"); \
+    return __res__;							\
+    }
+
+/*
+ * INTERNAL INTERFACES
+ */
+extern void cma__close_general  (int);
+
+extern void cma__init_thread_io  (void);
+
+extern cma_t_boolean cma__io_available  (cma__t_io_type,int,struct timeval *);
+
+extern void cma__io_epilog  (cma__t_io_type,int);
+
+extern void cma__io_prolog  (cma__t_io_type,int);
+
+extern void cma__io_wait  (cma__t_io_type,int);
+
+extern void cma__open_general  (int);
+
+extern void cma__reinit_thread_io  (int);
+
+extern void cma__set_nonblocking  (int);
+
+extern void cma__set_user_nonblock_flags  (int,int);
+
+extern cma_t_boolean cma__is_open (int);
+
+#endif
diff --git a/gdb/osf-share/README b/gdb/osf-share/README
new file mode 100644
index 0000000..c6d2e0f
--- /dev/null
+++ b/gdb/osf-share/README
@@ -0,0 +1,8 @@
+This directory contains header files necessary to build a thread-aware GDB on
+systems based on OSF's CMA threads package.
+
+The latest version of these header files are available for free from:
+
+	http://www.osf.org/mall/dce/SW-code
+
+Currently, the only port of GDB which supports CMA threads is HP/UX-10.10.
diff --git a/gdb/osf-share/RIOS/cma_thread_io.h b/gdb/osf-share/RIOS/cma_thread_io.h
new file mode 100644
index 0000000..98117ca
--- /dev/null
+++ b/gdb/osf-share/RIOS/cma_thread_io.h
@@ -0,0 +1,434 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for thread synchrounous I/O
+ */
+
+#ifndef CMA_THREAD_IO
+#define CMA_THREAD_IO
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_config.h>
+#include <sys/select.h>
+#include <cma.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <cma_init.h>
+#include <cma_errors.h>
+
+/*
+ * CONSTANTS
+ */
+
+/*
+ * Maximum number of files (ie, max_fd+1)
+ */
+#define cma__c_mx_file	FD_SETSIZE
+
+/*
+ * Number of bits per file descriptor bit mask (ie number of bytes * bits/byte)
+ */
+#define cma__c_nbpm	NFDBITS
+
+/*
+ * TYPE DEFINITIONS
+ */
+
+typedef enum CMA__T_IO_TYPE {
+    cma__c_io_read   = 0,
+    cma__c_io_write  = 1,
+    cma__c_io_except = 2
+    } cma__t_io_type;
+#define cma__c_max_io_type	2
+
+/*
+ * From our local <sys/types.h>:
+ *
+ *  typedef long    fd_mask;
+ *
+ *  typedef struct fd_set {
+ *          fd_mask fds_bits[howmany(FD_SETSIZE, NFDBITS)];
+ *  } fd_set;
+ *
+ */
+typedef fd_mask cma__t_mask;
+typedef fd_set  cma__t_file_mask;
+
+
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * Maximum number of files (ie, max_fd+1) as determined by getdtablesize().
+ */
+extern int	cma__g_mx_file;
+
+/*
+ * Number of submasks (ie "int" sized chunks) per file descriptor mask as
+ * determined by getdtablesize().
+ */
+extern int	cma__g_nspm;
+
+/*
+ * MACROS
+ */
+
+/*
+ * Define a constant for the errno value which indicates that the requested
+ * operation was not performed because it would block the process.
+ */
+# define cma__is_blocking(s) \
+    ((s == EAGAIN) || (s == EWOULDBLOCK) || (s == EINPROGRESS) || \
+     (s == EALREADY) || (s == EDEADLK))
+
+/*
+*	It is necessary to issue an I/O function, before calling cma__io_wait()
+*	in the following cases:
+*
+*		*	This file descriptor has been set non-blocking by CMA
+*		*	This file descriptor has been set non-blocking by the user.
+*/
+
+#define cma__issue_io_call(fd)					\
+	( (cma__g_file[fd]->non_blocking) || \
+	  (cma__g_file[fd]->user_fl.user_non_blocking) )
+
+
+#define cma__set_user_nonblocking(flags) \
+
+/*
+ * Determine if the file is open
+ */
+/*
+ * If the file gets closed while waiting for the mutex cma__g_file[rfd]
+ * gets set to null. This results in a crash if NDEBUG is set to 0 
+ * since cma__int_lock tries to dereference it to set the mutex ownership 
+ * after it gets the mutex. The following will still set the ownership
+ * in cma__int_lock so we'll set it back to noone if cma__g_file is null
+ * when we come back just in case it matters. It shouldn't since its no
+ * longer in use but..... 
+ * Callers of this should recheck cma__g_file after the reservation to
+ * make sure continueing makes sense.
+ */
+#define cma__fd_reserve(rfd) 	\
+		{ \
+		cma__t_int_mutex *__mutex__; \
+		__mutex__ = cma__g_file[rfd]->mutex; \
+		cma__int_lock (__mutex__); \
+		if(cma__g_file[rfd] == (cma__t_file_obj *)cma_c_null_ptr) \
+			cma__int_unlock(__mutex__); \
+		}
+		
+
+/*
+ * Unreserve a file descriptor
+ */
+#define cma__fd_unreserve(ufd)	cma__int_unlock (cma__g_file[ufd]->mutex)
+
+/*
+ * AND together two select file descriptor masks
+ */
+#define cma__fdm_and(target,a,b)					\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] & (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Clear a bit in a select file descriptor mask
+ *
+ * FD_CLR(n, p)  :=  ((p)->fds_bits[(n)/NFDBITS] &= ~(1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_clr_bit(n,p)	FD_CLR (n, p)
+
+/*
+ * Copy the contents of one file descriptor mask into another.  If the 
+ * destination operand is null, do nothing; if the source operand is null, 
+ * simply zero the destination.
+ */
+#define cma__fdm_copy(src,dst,nfds) {					\
+	if (dst)							\
+	    if (src) {							\
+		cma__t_mask *__s__ = (cma__t_mask *)(src);		\
+		cma__t_mask *__d__ = (cma__t_mask *)(dst);		\
+		int __i__;						\
+		for (__i__ = 0; __i__ < (nfds); __i__ += cma__c_nbpm)	\
+		    *__d__++ = *__s__++;				\
+		}							\
+	    else							\
+		cma__fdm_zero (dst);					\
+	    }
+
+/*
+ * To increment count for each bit set in fd - mask
+ */
+#define cma__fdm_count_bits(map,count)					\
+	{								\
+	int	__i__ = cma__g_nspm;					\
+	while (__i__--) {						\
+	    cma__t_mask    __tm__;				        \
+	    __tm__ = (map)->fds_bits[__i__];				\
+	    while(__tm__) {						\
+		(count)++;						\
+		__tm__ &= ~(__tm__ & (-__tm__)); /* Assumes 2's comp */	\
+		}							\
+	    }								\
+	}
+
+/*
+ * Test if a bit is set in a select file descriptor mask
+ *
+ * FD_ISSET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] & (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_is_set(n,p)	FD_ISSET (n, p)
+
+/*
+ * OR together two select file descriptor masks
+ */
+#define cma__fdm_or(target,a,b)						\
+	{								\
+	int __i__ = cma__g_nspm;					\
+	while (__i__--)							\
+	    (target)->fds_bits[__i__] =					\
+		(a)->fds_bits[__i__] | (b)->fds_bits[__i__];		\
+	}
+
+/*
+ * Set a bit in a select file descriptor mask
+ * 
+ * FD_SET(n,p)  :=  ((p)->fds_bits[(n)/NFDBITS] |= (1 << ((n) % NFDBITS)))
+ */
+#define cma__fdm_set_bit(n,p)	FD_SET (n, p)
+
+/*
+ * Clear a select file descriptor mask.
+ */
+#define cma__fdm_zero(n)						\
+	cma__memset ((char *) n, 0, cma__g_nspm * sizeof(cma__t_mask))
+
+
+
+
+
+/*
+ * CMA "thread-synchronous" I/O read/write operations
+ */
+
+    /*
+     * Since all CMA "thread-synchronous" I/O (read or write) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Check that the file descriptor is a legitimate value.
+     *	2. Check that the entry in the CMA file "database" which corresponds to 
+     *	    the file descriptor indicates that the "file" was "opened" by CMA.
+     *  3. Reserve the file, to serialized access to files.  This not only 
+     *	    simplifies things, but also defends against non-reentrancy.
+     *  4. If the "file" is "set" for non-blocking I/O, check if we
+     *      have actually set the file non-blocking yet, and if not do so.
+     *	    Then, issue the I/O operantion.
+     *	    Success or failure is returned immediately, after unreserving the 
+     *	    file.  If the error indicates that the operation would have caused
+     *	    the process to block, continue to the next step.
+     *	5. The I/O prolog adds this "file" to the global bit mask, which 
+     *	    represents all "files" which have threads waiting to perform I/O on 
+     *	    them, and causes the thread to block on the condition variable for
+     *	    this "file".  Periodically, a select is done on this global bit 
+     *	    mask, and the condition variables corresponding to "files" which 
+     *	    are ready for I/O are signaled, releasing those waiting threads to
+     *	    perform their I/O.
+     *  6. When the thread returns from the I/O prolog, it can (hopefully) 
+     *	    perform its operation without blocking the process.
+     *	7. The I/O epilog clears the bit in the global mask and/or signals the 
+     *	    the next thread waiting for this "file", as appropriate.
+     *  8. If the I/O failed, continue to loop.
+     *	9. Finally, the "file" is unreserved, as we're done with it, and the
+     *	    result of the operation is returned.
+     *
+     *
+     * Note:  currently, we believe that timeslicing which is based on the
+     *	    virtual-time timer does not cause system calls to return EINTR.  
+     *	    Threfore, any EINTR returns are relayed directly to the caller.
+     *	    On platforms which do not support a virtual-time timer, the code
+     *	    should probably catch EINTR returns and restart the system call.
+     */
+
+/*
+ * This macro is used for both read-type and write-type functions.
+ *
+ * Note:  the second call to "func" may require being bracketed in a
+ *	  cma__interrupt_disable/cma__interrupt_enable pair, but we'll 
+ *	  wait and see if this is necessary.
+ */
+#define cma__ts_func(func,fd,arglist,type,post_process)	{ \
+    cma_t_integer   __res__; \
+    cma_t_boolean   __done__ = cma_c_false; \
+    if ((fd < 0) || (fd >= cma__g_mx_file)) return (cma__set_errno (EBADF), -1); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    cma__fd_reserve (fd); \
+    if (!cma__is_open(fd)) return (cma__set_errno (EBADF), -1); \
+    if (cma__issue_io_call(fd)) {\
+	if ((!cma__g_file[fd]->set_non_blocking) && \
+		(cma__g_file[fd]->non_blocking == cma_c_true)) \
+	    cma__set_nonblocking(fd); \
+        cma__interrupt_disable (0); \
+	TRY { \
+	    __res__ = func arglist; \
+	    } \
+	CATCH_ALL { \
+	    cma__interrupt_enable (0); \
+	    cma__fd_unreserve (fd); \
+	    RERAISE; \
+	    } \
+	ENDTRY \
+        cma__interrupt_enable (0); \
+	if ((__res__ != -1) \
+		|| (!cma__is_blocking (errno)) \
+		|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+	    __done__ = cma_c_true; \
+	} \
+    if (__done__) { \
+	cma__fd_unreserve (fd); \
+	} \
+    else { \
+	TRY { \
+	    cma__io_prolog (type, fd); \
+	    while (!__done__) { \
+		cma__io_wait (type, fd); \
+		__res__ = func arglist; \
+		if ((__res__ != -1) \
+			|| (!cma__is_blocking (errno)) \
+			|| (cma__g_file[fd]->user_fl.user_non_blocking)) \
+		    __done__ = cma_c_true; \
+		} \
+	    } \
+	FINALLY { \
+	    cma__io_epilog (type, fd); \
+	    cma__fd_unreserve (fd); \
+	    } \
+	ENDTRY \
+	} \
+    if (__res__ != -1)  post_process; \
+    return __res__;  \
+    }
+
+    /*
+     * Since most CMA "thread-synchronous" I/O ("open"-type) operations on 
+     * U*ix follow the exact same structure, the wrapper routines have been
+     * condensed into a macro.
+     *
+     * The steps performed are as follows:
+     *	1. Issue the open function.
+     *	2. If the value returned indicates an error, return it to the caller.
+     *  3. If the file descriptor returned is larger than what we think is the
+     *	    maximum value (ie if it is too big for our database) then bugcheck.
+     *  4. "Open" the "file" in the CMA file database.
+     *	5. Return the file descriptor value to the caller.
+     *
+     * FIX-ME: for the time being, if the I/O operation returns EINTR, we 
+     *	    simply return it to the caller; eventually, we should catch this 
+     *	    and "do the right thing" (if we can figure out what that is).
+     */
+
+/*
+ * This macro is used for all "open"-type functions which return a single file
+ * desciptor by immediate value.
+ */
+#define cma__ts_open(func,arglist,post_process)  {		\
+    int	__fd__;							\
+    TRY {							\
+	cma__int_init ();					\
+	cma__int_lock (cma__g_io_data_mutex);			\
+	__fd__ = func arglist;					\
+	cma__int_unlock (cma__g_io_data_mutex);			\
+	if (__fd__ >= 0 && __fd__ < cma__g_mx_file)		\
+	    post_process;					\
+	}							\
+    CATCH_ALL							\
+	{							\
+	cma__set_errno (EBADF);					\
+	__fd__ = -1;						\
+	}							\
+    ENDTRY							\
+    if (__fd__ >= cma__g_mx_file)				\
+	cma__bugcheck ("cma__ts_open:  fd is too large");	\
+    return __fd__;						\
+    }
+/*
+ * This macro is used for all "open"-type functions which return a pair of file
+ * desciptors by reference parameter.
+ */
+#define cma__ts_open2(func,fdpair,arglist,post_process)  {		\
+    int	    __res__;							\
+    TRY {								\
+	cma__int_init ();						\
+	cma__int_lock (cma__g_io_data_mutex);				\
+	__res__ = func arglist;						\
+	cma__int_unlock (cma__g_io_data_mutex);				\
+	if (__res__ >= 0 && fdpair[0] < cma__g_mx_file			\
+		&& fdpair[1] < cma__g_mx_file)				\
+	    post_process;						\
+	}								\
+    CATCH_ALL								\
+	{								\
+	cma__set_errno (EBADF);						\
+	__res__ = -1;							\
+	}								\
+    ENDTRY								\
+    if ((fdpair[0] >= cma__g_mx_file) || (fdpair[1] >= cma__g_mx_file)) \
+	cma__bugcheck ("cma__ts_open2:  one of fd's is too large"); \
+    return __res__;							\
+    }
+
+/*
+ * INTERNAL INTERFACES
+ */
+extern void cma__close_general (int);
+
+extern void
+cma__init_thread_io (void);
+
+extern cma_t_boolean cma__io_available  (cma__t_io_type,int,struct timeval *);
+
+extern void cma__io_epilog  (cma__t_io_type,int);
+
+extern void cma__io_prolog  (cma__t_io_type,int);
+
+extern void cma__io_wait  (cma__t_io_type,int);
+
+extern void cma__open_general  (int);
+
+extern void cma__reinit_thread_io  (int);
+
+extern void cma__set_nonblocking  (int);
+
+extern void cma__set_user_nonblock_flags  (int,int);
+
+extern cma_t_boolean
+cma__is_open (int fd);
+
+
+#endif
+
+
diff --git a/gdb/osf-share/cma_attr.h b/gdb/osf-share/cma_attr.h
new file mode 100644
index 0000000..389fd6f
--- /dev/null
+++ b/gdb/osf-share/cma_attr.h
@@ -0,0 +1,341 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for attributes object
+ */
+
+#ifndef CMA_ATTR
+#define CMA_ATTR
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_defs.h>
+#include <cma_queue.h>
+#ifdef __hpux
+# include <sys/param.h>
+#endif
+#if _CMA_UNIX_TYPE == _CMA__SVR4
+#include <sys/unistd.h>
+#endif
+/*
+ * CONSTANTS AND MACROS
+ */
+
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_get_priority -  Performs the work of cma_attr_get_priority
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	cma_t_attr	    *_att_	- Attribute object to get from
+ *	cma_t_priority	    *_setting_	- Current setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	priority
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_attr_get_priority(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    (_int_att_) = cma__validate_default_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    (*(_setting_)) = (_int_att_)->priority; \
+    cma__int_unlock ((_int_att_)->mutex); \
+    }
+
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_get_sched - Performs work of cma_attr_get_sched
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	cma_t_attr	    *_att_	_ Attributes object used
+ *	cma_t_sched_policy  *_setting_	- Current setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	scheduling policy
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_attr_get_sched(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    (_int_att_) = cma__validate_default_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    (*(_setting_)) = (_int_att_)->policy; \
+    cma__int_unlock ((_int_att_)->mutex); \
+    }
+
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_get_inherit_sched - Performs work of 
+ *	cma_attr_get_inherit_sched
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	cma_t_attr	    *_att_	- Attributes object to use
+ *	cma_t_sched_inherit *_setting_	- Current setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	Inheritable scheduling policy
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_attr_get_inherit_sched(_att_,_setting_) { \
+    cma__t_int_attr	*_int_att_; \
+    (_int_att_) = cma__validate_default_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    (*(_setting_)) \
+        = ((_int_att_)->inherit_sched ? cma_c_sched_inherit : cma_c_sched_use_default); \
+    cma__int_unlock ((_int_att_)->mutex); \
+    }
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_set_stacksize - Performs work for cma_attr_set_stacksize
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *      cma_t_attr          *_att_      - Attributes object to use
+ *	cma_t_natural	    _setting_	- Setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	none
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	Change attribute objects stack size setting
+ */
+#define cma__int_attr_set_stacksize(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    if ((_setting_) <= 0) \
+        cma__error (cma_s_badparam); \
+    _int_att_ = cma__validate_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    _int_att_->stack_size = cma__roundup_chunksize(_setting_); \
+    cma__free_cache (_int_att_, cma__c_obj_tcb); \
+    _int_att_->cache[cma__c_obj_tcb].revision++; \
+    _int_att_->cache[cma__c_obj_stack].revision++; \
+    cma__int_unlock (_int_att_->mutex); \
+    }
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_get_stacksize - Performs work of cma_attr_get_stacksize
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *      cma_t_attr          *_att_      - Attributes object to use
+ *	cma_t_natural	    *_setting_	- Current setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	Attribute objects stack size setting
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_attr_get_stacksize(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    (_int_att_) = cma__validate_default_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    (*(_setting_)) = (_int_att_)->stack_size; \
+    cma__int_unlock ((_int_att_)->mutex); \
+    }
+
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_set_guardsize - Performs work for cma_attr_set_guardsize
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *      cma_t_attr          *_att_      - Attributes object to use
+ *	cma_t_natural	    _setting_	- Setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	none
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	Change attribute objects guard size setting
+ */
+#define cma__int_attr_set_guardsize(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    _int_att_ = cma__validate_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    _int_att_->guard_size = cma__roundup_chunksize(_setting_); \
+    cma__free_cache (_int_att_, cma__c_obj_tcb); \
+    _int_att_->cache[cma__c_obj_tcb].revision++; \
+    _int_att_->cache[cma__c_obj_stack].revision++; \
+    cma__int_unlock (_int_att_->mutex); \
+    }
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_attr_get_guardsize - Performs work of cma_attr_get_guardsize
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *      cma_t_attr          *_att_      - Attributes object to use
+ *	cma_t_natural	    *_setting_	- Current setting
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	Attribute objects guard size setting
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_attr_get_guardsize(_att_,_setting_) { \
+    cma__t_int_attr     *_int_att_; \
+    (_int_att_) = cma__validate_default_attr (_att_); \
+    cma__int_lock ((_int_att_)->mutex); \
+    (*(_setting_)) = (_int_att_)->guard_size; \
+    cma__int_unlock ((_int_att_)->mutex); \
+    }
+
+/*
+ * TYPEDEFS
+ */
+#ifndef __STDC__
+struct CMA__T_INT_MUTEX;		/* Avoid circular dependency */
+#endif
+
+typedef struct CMA__T_CACHE {
+    cma_t_natural		revision;	/* Revisions */
+    cma_t_natural		count;
+    cma__t_queue		queue;	/* Cache headers */
+    } cma__t_cache;
+
+typedef struct CMA__T_INT_ATTR {
+    cma__t_object		header;		/* Common header */
+    struct CMA__T_INT_ATTR	*attributes;	/* Point to controlling attr */
+    struct CMA__T_INT_MUTEX	*mutex;		/* Serialize access to object */
+    cma_t_priority		priority;	/* Priority of new thread */
+    cma_t_sched_policy		policy;		/* Sched policy of thread */
+    cma_t_boolean		inherit_sched;	/* Is scheduling inherited? */
+    cma_t_natural		stack_size;	/* Size of stack (bytes) */
+    cma_t_natural		guard_size;	/* Size of guard (bytes) */
+    cma_t_mutex_kind		mutex_kind;	/* Mutex kind */
+    cma__t_cache		cache[cma__c_obj_num];	/* Cache information */
+    cma_t_boolean		delete_pending;	/* attr. obj. is deleted */
+    cma_t_natural		refcnt;	/* Number of objects using attr. obj */
+    } cma__t_int_attr;
+
+/*
+ *  GLOBAL DATA
+ */
+
+extern cma__t_int_attr	cma__g_def_attr;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void cma__destroy_attributes  (cma__t_int_attr *);
+
+extern void cma__free_attributes  (cma__t_int_attr	*);
+
+extern void cma__free_cache  (cma__t_int_attr *,cma_t_natural );
+
+extern cma__t_int_attr *cma__get_attributes  (cma__t_int_attr	*);
+
+extern void cma__init_attr  (void);
+
+extern void cma__reinit_attr  (cma_t_integer);
+
+#endif
diff --git a/gdb/osf-share/cma_deb_core.h b/gdb/osf-share/cma_deb_core.h
new file mode 100644
index 0000000..f0a9c34
--- /dev/null
+++ b/gdb/osf-share/cma_deb_core.h
@@ -0,0 +1,164 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	This file defines the internal interface to the core of CMA 
+ * 	debugging services. (The client interface to debugging services
+ *	is provided by cma_debug_client.h).
+ */
+
+#ifndef CMA_DEB_CORE
+#define CMA_DEB_CORE
+
+/*
+ *  INCLUDE FILES
+ */
+#include <cma.h>
+#include <cma_mutex.h>
+#include <cma_queue.h>
+#include <cma_tcb_defs.h>
+#include <cma_util.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+
+/*
+ * TYPEDEFS
+ */
+
+/*FIX-ME* Need to use sizes that are platform specific */
+typedef long int cma___t_debug_ctx[17];
+
+/*
+ * Type defing the format of known object lists
+ */
+typedef struct CMA__T_KNOWN_OBJECT {
+    cma__t_queue	queue;		/* Queue header for known objects */
+    cma__t_int_mutex	*mutex;		/* Mutex to control access to queue */
+    } cma__t_known_object;
+
+
+/*
+ * Type defining the registration for one debug client (e.g. Ada)
+ */
+typedef struct CMA__T_DEB_REGISTRY {
+    cma_t_address	entry;		/* Client's debug entry point */
+    cma_t_key		key;		/* Client's context key */
+    cma_t_integer	fac;		/* Client's debug facility number */
+    cma_t_boolean 	has_prolog;	/* Client's TCBs have std prolog */
+    } cma__t_deb_registry;
+
+#define cma__c_deb_max_clients	10
+
+/* 
+ * Type defining the global debugging state for all threads.
+ */
+typedef struct CMA__T_DEBUG_STATE {
+    /* 
+     * The following flag is set if changes were made while in the
+     * debugger that may make the ready lists inconsistent.  For 
+     * example, if a thread priority is changed in the debugger, the
+     * thread is not moved between queues.  Making things consistent
+     * is deferred to when the dispatcher is next invoked -- which we
+     * try to make very soon.
+     */
+    cma_t_boolean 	is_inconsistency;   /* Ready lists are inconsistent */
+
+
+    cma_t_boolean 	events_enabled;	    /* Set if _any_ event is enabled */
+    cma_t_boolean	flags[cma__c_debevt__dim]; 	
+					    /* Which events are enabled */
+    cma__t_int_tcb	*next_to_run;	    /* TCB of thread to run next */ 
+
+    cma__t_int_mutex	*mutex;		    /* Mutex for registering clients */
+    cma_t_integer	client_count;	    /* Count of debug clients */
+    cma__t_deb_registry	clients[cma__c_deb_max_clients+1];
+					    /* Array of current debug clients */
+    } cma__t_debug_state;
+
+
+/* 
+ * Routine that will symbolize and address and print it.
+ */
+typedef void	(*cma__t_print_symbol) (cma_t_address);
+
+
+/*
+ *  GLOBAL DATA
+ */
+
+/* 
+ * Variable holding the global debugging state 
+ *
+ * (This is primarily written by the debugger interface and read
+ * by the thread dispatcher).
+ */
+extern cma__t_debug_state	cma__g_debug_state;
+
+/* 
+ * Known object queues
+ */
+extern cma__t_known_object	cma__g_known_atts;
+extern cma__t_known_object	cma__g_known_cvs;
+extern cma__t_known_object	cma__g_known_mutexes;
+extern cma__t_known_object	cma__g_known_threads;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+/* Get information while in debugger context */
+extern void cma__deb_get 
+           (cma__t_int_tcb *,cma_t_debug_get,cma_t_address,cma_t_integer,cma_t_integer);
+
+/* Set information while in debugger context */
+extern void cma__deb_set (cma__t_int_tcb *,cma_t_debug_set,cma_t_address,cma_t_integer);
+
+extern void cma__init_debug (void);
+
+extern void cma__reinit_debug (cma_t_integer);
+
+extern void cma__deb_anytcb_to_tcb (cma_t_tcb_header *,cma__t_int_tcb **);
+
+extern void cma__deb_fac_to_client (cma_t_integer,cma_t_key *);
+
+extern void cma__deb_get_client_info (cma_t_key,cma_t_address *,cma_t_boolean *);
+
+extern void cma__deb_get_context (cma__t_int_tcb *,cma_t_key,cma_t_address *);
+
+extern cma__t_int_tcb *cma__deb_get_self_tcb (void);
+
+extern void cma__deb_get_time_slice (cma_t_interval *);
+
+extern cma__t_int_tcb *cma__deb_next_tcb 
+            (cma__t_int_tcb *,cma_t_integer *,cma_t_integer *,cma_t_boolean *);
+
+extern cma_t_boolean cma__deb_set_alert (cma__t_int_tcb *);
+
+extern void cma__deb_set_next_thread (cma__t_int_tcb *);
+	
+extern void cma__deb_set_force_dispatch (cma_t_address );
+
+extern void cma__deb_set_time_slice (cma_t_interval);
+
+extern void cma__deb_show_thread 
+     (cma__t_int_tcb *,cma_t_boolean,cma_t_boolean,cma___t_debug_ctx,cma__t_eol_routine,
+                cma__t_eol_routine,cma__t_print_symbol);
+
+extern void
+cma__deb_show_stats (cma__t_int_tcb *,cma_t_boolean,cma_t_boolean,cma__t_eol_routine,cma__t_eol_routine,cma__t_print_symbol);
+#endif
diff --git a/gdb/osf-share/cma_debug_client.h b/gdb/osf-share/cma_debug_client.h
new file mode 100644
index 0000000..adb0909
--- /dev/null
+++ b/gdb/osf-share/cma_debug_client.h
@@ -0,0 +1,195 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file providing access to CMA clients that implement
+ * 	language run-times to the CMA debugger capabilities.
+ *
+ *	NOTE: the clients that are able to use this interface is
+ *	very limited because clients needing task debugging must have 
+ *	support in the system debugger as well as here (at present).
+ *	The following are the only legitimate clients of this interface:
+ *	ADA runtime, C++ tasking library, and CMA.
+ *
+ *FIX-ME* We shall endeavor to extend these capabilities so that the
+ * 	all-platform CMA debugger CMA_DEBUG and any client can layer
+ * 	on thread debugging.  But that is still an open design problem.
+ *	The design here does not preclude that extension (for example,
+ *	the identity of the debug-client is indicated in an "open"
+ *	manner by using the CMA context key as the identifier.
+ */
+
+#ifndef CMA_DEBUG_CLIENT
+#define CMA_DEBUG_CLIENT
+
+/*
+ *  INCLUDE FILES
+ */
+#include <cma.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+/*
+ * TYPEDEFS
+ */
+
+/*
+ * Type describing constants for a valid TCB sentinel.
+ * Exactly one value is valid, but we provide a symbolic name for
+ * at least one invalid sentinel as a convenience.
+ */
+typedef enum CMA_T_TCB_SENTINEL {
+	cma_c_tcb_sentinel_nogood = 0,	/* Invalid sentinel constant */
+	cma_c_tcb_sentinel = 0x0ACEFACE /* Valid TCB sentinel */
+	} cma_t_tcb_sentinel;
+
+/*
+ * Type describing pad fields needed to align the "standard prolog"
+ * to the right byte at the front of each TCB.  These fields are
+ * free to be put to any use by the client.
+ *
+ * This is 32 bytes long and is fixed at this size for all clients
+ * and CMA, for all time.
+ */
+typedef struct CMA_T_TCB_PRIVATE {
+    cma_t_integer	pad1;		
+    cma_t_integer	pad2;	
+    cma_t_integer	pad3;
+    cma_t_integer	pad4;
+    cma_t_integer	pad5;
+    cma_t_integer	pad6;
+    cma_t_integer	pad7;
+    cma_t_integer	pad8;
+    } cma_t_tcb_private;
+
+/*
+ * Type describing the "standard prolog" that clients should use 
+ * within their task control blocks.  We assume that the client will
+ * store their "task control block" as a per-thread context under
+ * the context key specified here.
+ */
+typedef struct CMA_T_TCB_PROLOG {
+    cma_t_tcb_sentinel	sentinel;	/* Validity sentinel */
+    cma_t_thread	client_thread;	/* Thread corresonding to task */
+    cma_t_key		client_key;	/* Context key this is stored under */
+    cma_t_address	reserved1;	/* Must be zero, reserved to CMA */
+    } cma_t_tcb_prolog;
+
+/*
+ * Type defining the layout of all TCBs and TASKS.  This format
+ * ensures that tasks will be self-identifying to the debugger.
+ * this layout must never change as the CMA DEBUG Clients cannot
+ * be changed after CMA ships.
+ */
+typedef struct CMA_T_TCB_HEADER {
+    cma_t_tcb_private	IGNORED; 	/* TCB fields private to the client */
+    cma_t_tcb_prolog	prolog; 	/* The standard prolog goes here */
+    } cma_t_tcb_header;
+
+
+/*
+ * Type describing the kinds of information that a CMA debug
+ * client can GET about a thread.
+ */
+typedef enum CMA_T_DEBUG_GET {
+	/* 
+	 * All of the following items use a buffer whose size is
+	 * four bytes.  (That is four must be passed as the buffer_size
+	 * parameter to cma_debug_get.)
+	 */
+	cma_c_debget_guardsize = 1,	/* Current guard size (bytes) */
+	cma_c_debget_is_held = 2, 	/* Is it on hold? */
+	cma_c_debget_is_initial = 3, 	/* Is it the initial thread? */
+	cma_c_debget_number = 4, 	/* Thread's number */
+	cma_c_debget_stack_ptr = 5, 	/* Current stack pointer */
+	cma_c_debget_stack_base = 6, 	/* Stack base address */
+	cma_c_debget_stack_top 	= 7, 	/* Stack top address */
+	cma_c_debget_sched_state = 8,	/* Scheduler state 
+					 *	0 - run
+					 *	1 - ready
+					 * 	2 - blocked
+					 * 	3 - terminated
+					 */
+	cma_c_debget_reserve_size = 9, 	/* Size of stack reserve (bytes) */
+	cma_c_debget_base_prio = 10, 	/* Base priority */
+	cma_c_debget_priority = 11, 	/* Current priority */
+	cma_c_debget_regs = 12,		/* Register set (and proc. state) */
+	cma_c_debget_alt_pending = 13,	/* Alert is pending */
+	cma_c_debget_alt_a_enable = 14,	/* Asynch alert delivery enabled */
+	cma_c_debget_alt_g_enable = 15,	/* General alert delivery enabled */
+	cma_c_debget_substate = 16,	/* Substate (or wait state) */
+	cma_c_debget_object_addr = 17,	/* Address of thread object */
+	cma_c_debget_thkind = 18,	/* Kind of thread */
+	cma_c_debget_detached	= 19,	/* Thread is detached */
+	cma_c_debget_tcb_size	= 20,	/* TCB size */
+	cma_c_debget_start_pc	= 21,	/* Start address */
+	cma_c_debget_next_pc	= 22,	/* Next instruction */
+	cma_c_debget_policy	= 23,	/* Sched policy */
+	cma_c_debget_stack_yellow = 24,	/* Addr of start of guard area */
+	cma_c_debget_stack_default = 25	/* True if on default stack */
+
+	} cma_t_debug_get;
+
+/*
+ * Type describing the kinds of information that a CMA debug
+ * client can SET (or change) about a thread using cma_debug_set.
+ */
+typedef enum CMA_T_DEBUG_SET {
+	/* 
+	 * All of the following items use a buffer whose size is
+	 * four bytes.  (That is four must be passed as the buffer_size
+	 * parameter to cma_debug_set.)
+	 */
+	cma_c_debset_priority	= 1, 	/* Set the priority */
+	cma_c_debset_policy	= 2,	/* Set the sched policy */
+	cma_c_debset_hold	= 3,	/* Put thread on hold */
+	cma_c_debset_regs	= 4	/* Set the regs and proc. state */
+
+	} cma_t_debug_set;
+
+
+/*
+ *  GLOBAL DATA
+ * 
+ * 	none
+ */
+
+/*
+ * EXTERNAL INTERFACES
+ */
+
+/* 
+ * Routine to register with the CMA debug dispatcher.
+ */
+extern void     cma_debug_register (cma_t_address,cma_t_key,cma_t_integer,cma_t_boolean);
+
+/* 
+ * Routine to get get thread state needed by the CMA debug client.
+ */
+extern void     cma_debug_get (cma_t_thread *,cma_t_debug_get,cma_t_address,cma_t_integer);
+
+/* 
+ * Get thread context given an sp and a key 
+ */
+extern void cma_debug_get_sp_context    (cma_t_address,cma_t_key,cma_t_address *);
+
+/* 
+ * Routine to set thread state as needed by the CMA debug client.
+ */
+extern void     cma_debug_set (cma_t_thread *,cma_t_debug_set,cma_t_address,cma_t_integer);
+
+#endif
diff --git a/gdb/osf-share/cma_errors.h b/gdb/osf-share/cma_errors.h
new file mode 100644
index 0000000..8ac1795
--- /dev/null
+++ b/gdb/osf-share/cma_errors.h
@@ -0,0 +1,55 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	This module is the interface between CMA services and 
+ * 	the platform-specific error reporting mechanism.
+ */
+
+#ifndef CMA_ERRORS
+#define CMA_ERRORS
+
+/*
+ *  INCLUDE FILES
+ */
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+/*
+ * TYPEDEFS
+ */
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+/*
+ * The cma__bugcheck function will print information to stderr (or sys$error
+ * on VMS), and more extensive information to the file cma_dump.log in the
+ * current working directory.
+ */
+extern void cma__bugcheck  (char *,...);
+
+extern void cma__error  (int);
+
+extern void cma__unimplemented (void);
+
+#endif
diff --git a/gdb/osf-share/cma_handle.h b/gdb/osf-share/cma_handle.h
new file mode 100644
index 0000000..e63de01
--- /dev/null
+++ b/gdb/osf-share/cma_handle.h
@@ -0,0 +1,182 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for handles
+ */
+
+#ifndef CMA_HANDLE
+#define CMA_HANDLE
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_defs.h>
+#include <cma_attr.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma__validate_attr(handle) \
+    ((cma__t_int_attr *)cma__validate_handle ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_attr))
+
+#define cma__validate_cv(handle) \
+    ((cma__t_int_cv *)cma__validate_handle ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_cv))
+
+#define cma__validate_mutex(handle) \
+    ((cma__t_int_mutex *)cma__validate_handle ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_mutex))
+
+#define cma__validate_tcb(handle) \
+    ((cma__t_int_tcb *)cma__validate_handle ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_tcb))
+
+#define cma__validate_stack(handle) \
+    ((cma__t_int_stack *)cma__validate_handle ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_stack))
+
+#define cma__validate_null_attr(handle) \
+    ((cma__t_int_attr *)cma__validate_handle_null ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_attr))
+
+#define cma__validate_null_cv(handle) \
+    ((cma__t_int_cv *)cma__validate_handle_null ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_cv))
+
+#define cma__validate_null_mutex(handle) \
+    ((cma__t_int_mutex *)cma__validate_handle_null ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_mutex))
+
+#define cma__validate_null_tcb(handle) \
+    ((cma__t_int_tcb *)cma__validate_handle_null ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_tcb))
+
+#define cma__validate_null_stack(handle) \
+    ((cma__t_int_stack *)cma__validate_handle_null ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_stack))
+
+#define cma__val_attr_stat(handle,obj) \
+    cma__val_hand_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_attr, \
+	    (cma__t_object **)obj)
+
+#define cma__val_cv_stat(handle,obj) \
+    cma__val_hand_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_cv, \
+	    (cma__t_object **)obj)
+
+#define cma__val_mutex_stat(handle,obj) \
+    cma__val_hand_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_mutex, \
+	    (cma__t_object **)obj)
+
+#define cma__val_tcb_stat(handle) \
+    cma__val_hand_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_tcb, \
+	    (cma__t_object **)obj)
+
+#define cma__val_stack_stat(handle,obj) \
+    cma__val_hand_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_stack, \
+	    (cma__t_object **)obj)
+
+#define cma__val_nullattr_stat(handle,obj) \
+    cma__val_handnull_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_attr, \
+	    (cma__t_object **)obj)
+
+#define cma__val_nullcv_stat(handle,obj) \
+    cma__val_handnull_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_cv, \
+	    (cma__t_object **)obj)
+
+#define cma__val_nullmutex_stat(handle,obj) \
+    cma__val_handnull_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_mutex, \
+	    (cma__t_object **)obj)
+
+#define cma__val_nulltcb_stat(handle,obj) \
+    cma__val_handnull_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_tcb, \
+	    (cma__t_object **)obj)
+
+#define cma__val_nullstack_stat(handle) \
+    cma__val_handnull_stat ( \
+	    (cma_t_handle *)(handle), \
+	    cma__c_obj_stack, \
+	    (cma__t_object **)obj)
+
+/*
+ * TYPEDEFS
+ */
+
+/*
+ * Internal format of a handle (to the outside world it's an array of two
+ * addresses, but we know better).
+ */
+typedef struct CMA__T_INT_HANDLE {
+    cma__t_object	*pointer;	/* Address of internal structure */
+    cma__t_short	sequence;	/* Sequence number of object */
+    cma__t_short	type;		/* Type code of object */
+    } cma__t_int_handle;
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void cma__clear_handle (cma_t_handle *);
+
+extern void cma__object_to_handle (cma__t_object *,cma_t_handle *);
+
+extern cma__t_int_attr * cma__validate_default_attr (cma_t_handle *);
+
+extern cma_t_status cma__val_defattr_stat (cma_t_handle *,cma__t_int_attr **);
+
+extern cma__t_object * cma__validate_handle (cma_t_handle *,cma_t_natural );
+
+extern cma_t_status cma__val_hand_stat (cma_t_handle *,cma_t_natural,cma__t_object **);
+
+extern 	cma__t_object	*cma__validate_handle_null (cma_t_handle *,cma_t_natural);
+
+extern cma_t_status cma__val_handnull_stat (cma_t_handle *,cma_t_natural,cma__t_object **);
+
+#endif
diff --git a/gdb/osf-share/cma_init.h b/gdb/osf-share/cma_init.h
new file mode 100644
index 0000000..7309736
--- /dev/null
+++ b/gdb/osf-share/cma_init.h
@@ -0,0 +1,114 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for CMA initialization
+ */
+
+#ifndef CMA_INIT
+#define CMA_INIT
+
+/*
+ *  INCLUDE FILES
+ */
+#include <dce/cma_host.h>
+#include <cma_errors.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma__c_env_maxattr	0
+#define cma__c_env_minattr	1
+#define cma__c_env_maxcond	2
+#define	cma__c_env_mincond	3
+#define cma__c_env_maxmutex	4
+#define cma__c_env_minmutex	5
+#define cma__c_env_maxthread	6
+#define cma__c_env_minthread	7
+#define cma__c_env_maxcluster	8
+#define cma__c_env_mincluster	9
+#define cma__c_env_maxvp	10
+#define cma__c_env_multiplex	11
+#define cma__c_env_trace	12
+#define cma__c_env_trace_file	13
+
+#define cma__c_env_count	13
+
+
+/*
+ * cma__int_init
+ *
+ * Initialize the main body of CMA exactly once.
+ *
+ * We raise an exception if, for some odd reason, there are already threads
+ * in the environment (e.g. kernel threads), and one of them is trying to
+ * initialize CMA before the  first thread got all the way through the actual
+ * initialization. This code maintains the invariants: "after successfully
+ * calling CMA_INIT, you can call any CMA function", and  "CMA is actually
+ * initialized at most once".
+ */
+/*#ifndef _HP_LIBC_R */
+
+#if  defined _HP_LIBC_R  ||(defined(SNI_SVR4) && !defined(CMA_INIT_NEEDED))
+# define cma__int_init()
+#else
+# define cma__int_init() { \
+    if (!cma__tac_isset(&cma__g_init_started)) { \
+	if (!cma__test_and_set (&cma__g_init_started)) { \
+	    cma__init_static (); \
+	    cma__test_and_set (&cma__g_init_done); \
+	    } \
+	else if (!cma__tac_isset (&cma__g_init_done)) { \
+	    cma__error (cma_s_inialrpro); \
+    }}}
+#endif
+
+/*
+ * TYPEDEFS
+ */
+
+typedef enum CMA__T_ENV_TYPE {
+    cma__c_env_type_int,
+    cma__c_env_type_file
+    } cma__t_env_type;
+
+typedef struct CMA__T_ENV {
+    char		*name;		/* Name of environment variable */
+    cma__t_env_type	type;		/* Type of variable */
+    cma_t_integer	value;		/* Numeric value of the variable */
+    } cma__t_env;
+
+/*
+ *  GLOBAL DATA
+ */
+
+extern cma__t_env		cma__g_env[cma__c_env_count];
+extern cma__t_atomic_bit	cma__g_init_started;
+extern cma__t_atomic_bit	cma__g_init_done;
+extern char			*cma__g_version;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void
+cma__init_static (void);	/* Initialize static data */
+
+#if _CMA_OS_ != _CMA__VMS
+extern void cma__init_atfork (void);
+#endif
+
+#endif
diff --git a/gdb/osf-share/cma_list.h b/gdb/osf-share/cma_list.h
new file mode 100644
index 0000000..463fa49
--- /dev/null
+++ b/gdb/osf-share/cma_list.h
@@ -0,0 +1,84 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for generic list functions operating on singly linked
+ *	null-terminated lists.  Items may not be REMOVED from the list!  The
+ *	intent is that the list can be traversed (for read-only operations)
+ *	without locking, since insertion is "safe" (though not truely
+ *	atomic).  THIS ASSUMES THAT THE HARDWARE MAKES WRITES VISIBLE TO READS
+ *	IN THE ORDER IN WHICH THEY OCCURRED!  WITHOUT SUCH READ/WRITE
+ *	ORDERING, IT MAY BE NECESSARY TO INSERT "BARRIERS" TO PRODUCE THE
+ *	REQUIRED VISIBILITY!
+ */
+
+#ifndef CMA_LIST
+#define CMA_LIST
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma__c_null_list	((cma__t_list *)cma_c_null_ptr)
+
+/*
+ * Test whether a list is empty.  Return cma_c_true if so, else
+ * cma_c_false.
+ */
+#define cma__list_empty(head)	((head)->link == cma__c_null_list)
+
+/*
+ * Initialize a queue header to empty.
+ */
+#define cma__list_init(head)	(void)((head)->link = cma__c_null_list)
+
+/*
+ * Insert an element in a list following the specified item (or at the
+ * beginning of the list if "list" is the list head).  NOTE: insertion
+ * operations should be interlocked by the caller!
+ */
+#define cma__list_insert(element,list)    (void)(	\
+    (element)->link		= (list)->link,		\
+    (list)->link		= (element))
+
+/*
+ * Return the next item in a list (or the first, if the address is of the
+ * list header)
+ */
+#define cma__list_next(element)    ((element)->link)
+
+/*
+ * TYPEDEFS
+ */
+
+typedef struct CMA__T_LIST {
+    struct CMA__T_LIST	*link;		/* Forward link */
+    } cma__t_list;
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+#endif
diff --git a/gdb/osf-share/cma_mutex.h b/gdb/osf-share/cma_mutex.h
new file mode 100644
index 0000000..c178630
--- /dev/null
+++ b/gdb/osf-share/cma_mutex.h
@@ -0,0 +1,230 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for mutex operations
+ */
+
+#ifndef CMA_MUTEX
+#define CMA_MUTEX
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma.h>
+#include <cma_attr.h>
+#include <cma_defs.h>
+#include <cma_semaphore_defs.h>
+#include <cma_sequence.h>
+#include <cma_tcb_defs.h>
+#include <cma_stack.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+/*
+ * TYPEDEFS
+ */
+
+typedef struct CMA__T_INT_MUTEX {
+    cma__t_object	header;		/* Common header (sequence, type) */
+    cma__t_int_attr	*attributes;	/* Back link */
+    cma__t_int_tcb	*owner;		/* Current owner (if any) */
+    cma_t_integer	nest_count;	/* Nesting level for recursive mutex */
+    cma__t_atomic_bit	*unlock;	/* Pointer used for unlock operation */
+    cma__t_atomic_bit	lock;		/* Set if currently locked */
+    struct CMA__T_INT_MUTEX *int_lock;	/* Internal protection for mutex */
+    cma__t_atomic_bit	event;		/* Clear when unlock requires action */
+    cma__t_atomic_bit	waiters;	/* Clear when threads are waiting */
+    cma__t_atomic_bit	bitbucket;	/* Fake bit to keep friendlies locked */
+    cma_t_mutex_kind	mutex_kind;	/* Kind of mutex */
+    cma__t_semaphore	semaphore;	/* Semaphore for low-level wait */
+    } cma__t_int_mutex;
+
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	Lock a mutex (internal)
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	mutex		Pointer to mutex object to lock
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	none
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#ifdef NDEBUG
+# define cma__int_lock(mutex) { \
+    if (cma__test_and_set (&((cma__t_int_mutex *)mutex)->lock)) { \
+	cma_t_status	res;\
+	res = cma__int_mutex_block ((cma__t_int_mutex *)mutex); \
+	if (res != cma_s_normal) cma__error (res); \
+	} \
+    }
+#else
+# define cma__int_lock(mutex) { \
+    cma__t_int_tcb *__ltcb__; \
+    __ltcb__ = cma__get_self_tcb (); \
+    if (cma__test_and_set (&((cma__t_int_mutex *)mutex)->lock)) { \
+	cma_t_status	res;\
+	res = cma__int_mutex_block ((cma__t_int_mutex *)mutex); \
+	if (res != cma_s_normal) cma__error (res); \
+	} \
+    ((cma__t_int_mutex *)mutex)->owner = __ltcb__; \
+    }
+#endif
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	Unlock a mutex (internal)
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	mutex		Pointer to mutex object to unlock
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	none
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#ifdef NDEBUG
+# define cma__int_unlock(mutex) { \
+    cma__unset (((cma__t_int_mutex *)mutex)->unlock); \
+    if (!cma__test_and_set (&((cma__t_int_mutex *)mutex)->event)) { \
+	cma_t_status	res;\
+	res = cma__int_mutex_unblock ((cma__t_int_mutex *)mutex); \
+	if (res != cma_s_normal) cma__error (res); \
+	} \
+    }
+#else
+# define cma__int_unlock(mutex) { \
+    cma__t_int_tcb	*__utcb__; \
+    __utcb__ = cma__get_self_tcb (); \
+    if (((cma__t_int_mutex *)mutex)->mutex_kind == cma_c_mutex_fast) { \
+	cma__assert_warn ( \
+		(__utcb__ == ((cma__t_int_mutex *)mutex)->owner), \
+		"attempt to release mutx owned by another thread"); \
+	((cma__t_int_mutex *)mutex)->owner = (cma__t_int_tcb *)cma_c_null_ptr; \
+	} \
+    cma__unset (((cma__t_int_mutex *)mutex)->unlock); \
+    if (!cma__test_and_set (&((cma__t_int_mutex *)mutex)->event)) { \
+	cma_t_status	res;\
+	res = cma__int_mutex_unblock ((cma__t_int_mutex *)mutex); \
+	if (res != cma_s_normal) cma__error (res); \
+	} \
+    }
+#endif
+
+/*
+ *  FUNCTIONAL DESCRIPTION:
+ *
+ *	cma__int_mutex_delete - Performs work for cma_mutex_delete
+ *
+ *  FORMAL PARAMETERS:
+ *
+ *	cma__t_mutex	    _mutex_	- Mutex to be deleted
+ *
+ *  IMPLICIT INPUTS:
+ *
+ *	none
+ *
+ *  IMPLICIT OUTPUTS:
+ *
+ *	none
+ *
+ *  FUNCTION VALUE:
+ *
+ *	none
+ *
+ *  SIDE EFFECTS:
+ *
+ *	none
+ */
+#define cma__int_mutex_delete(_mutex_) { \
+    cma__t_int_mutex    *_int_mutex_; \
+    _int_mutex_ = cma__validate_null_mutex (_mutex_); \
+    if (_int_mutex_ == (cma__t_int_mutex *)cma_c_null_ptr) \
+        return; \
+    if (cma__int_mutex_locked (_int_mutex_)) \
+        cma__error (cma_s_in_use); \
+    cma__free_mutex (_int_mutex_); \
+    cma__clear_handle (_mutex_); \
+    }
+
+
+/*
+ *  GLOBAL DATA
+ */
+
+extern cma__t_sequence	cma__g_mutex_seq;
+extern cma__t_int_mutex	*cma__g_global_lock;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void cma__destroy_mutex  (cma__t_int_mutex *);
+
+extern void cma__free_mutex  (cma__t_int_mutex *);
+
+extern void cma__free_mutex_nolock  (cma__t_int_mutex *);
+
+extern cma__t_int_mutex * cma__get_first_mutex  (cma__t_int_attr *);
+
+extern cma__t_int_mutex * cma__get_mutex  (cma__t_int_attr *);
+
+extern void cma__init_mutex  (void);
+
+extern cma_t_status cma__int_mutex_block  (cma__t_int_mutex *);
+
+extern cma_t_boolean cma__int_mutex_locked  (cma__t_int_mutex *);
+
+extern cma_t_boolean cma__int_try_lock  (cma__t_int_mutex *);
+
+extern cma_t_status cma__int_mutex_unblock  (cma__t_int_mutex *);
+
+extern cma_t_boolean cma__mutex_locked  (cma_t_mutex);
+
+extern void cma__reinit_mutex  (cma_t_integer);
+
+#endif
diff --git a/gdb/osf-share/cma_sched.h b/gdb/osf-share/cma_sched.h
new file mode 100644
index 0000000..6eb7874
--- /dev/null
+++ b/gdb/osf-share/cma_sched.h
@@ -0,0 +1,279 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for priority scheduling
+ */
+
+
+#ifndef CMA_SCHED
+#define CMA_SCHED
+
+/*
+ *  INCLUDE FILES
+ */
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+/*
+ * Scaling factor for integer priority calculations
+ */
+#define cma__c_prio_scale   8
+
+#if _CMA_VENDOR_ == _CMA__APOLLO
+/*
+ * FIX-ME: Apollo cc 6.8 blows contant folded "<<" and ">>"
+ */
+# define cma__scale_up(exp)  ((exp) * 256)
+# define cma__scale_dn(exp)  ((exp) / 256)
+#else
+# define cma__scale_up(exp)  ((exp) << cma__c_prio_scale)
+# define cma__scale_dn(exp)  ((exp) >> cma__c_prio_scale)
+#endif
+
+
+/*
+ * Min. num. of ticks between self-adjustments for priority adjusting policies.
+ */
+#define cma__c_prio_interval	10
+
+
+/*
+ * Number of queues in each class of queues
+ */
+#define cma__c_prio_n_id    1	    /* Very-low-priority class threads */
+#define cma__c_prio_n_bg    8	    /* Background class threads */
+#define cma__c_prio_n_0	    1	    /* Very low priority throughput quartile */
+#define cma__c_prio_n_1	    2	    /* Low priority throughput quartile */
+#define cma__c_prio_n_2	    3	    /* Medium priority throughput quartile */
+#define cma__c_prio_n_3	    4	    /* High priority throughput quartile */
+#define cma__c_prio_n_rt    1	    /* Real Time priority queues */
+
+/*
+ * Number of queues to skip (offset) to get to the queues in this section of LA
+ */
+#define cma__c_prio_o_id 0
+#define cma__c_prio_o_bg cma__c_prio_o_id + cma__c_prio_n_id
+#define cma__c_prio_o_0  cma__c_prio_o_bg + cma__c_prio_n_bg
+#define cma__c_prio_o_1  cma__c_prio_o_0  + cma__c_prio_n_0
+#define cma__c_prio_o_2  cma__c_prio_o_1  + cma__c_prio_n_1
+#define cma__c_prio_o_3  cma__c_prio_o_2  + cma__c_prio_n_2
+#define cma__c_prio_o_rt cma__c_prio_o_3  + cma__c_prio_n_3
+
+/*
+ * Ada_low:  These threads are queued in the background queues, thus there
+ * must be enough queues to allow one queue for each Ada priority below the
+ * Ada default.
+ */  
+#define cma__c_prio_o_al cma__c_prio_o_bg
+
+/*
+ * Total number of ready queues, for declaration purposes
+ */
+#define cma__c_prio_n_tot  \
+	cma__c_prio_n_id + cma__c_prio_n_bg + cma__c_prio_n_rt \
+	+ cma__c_prio_n_0 + cma__c_prio_n_1 + cma__c_prio_n_2 + cma__c_prio_n_3
+
+/*
+ * Formulae for determining a thread's priority.  Variable priorities (such
+ * as foreground and background) are scaled values.
+ */
+#define cma__sched_priority(tcb)	\
+    ((tcb)->sched.class == cma__c_class_fore  ? cma__sched_prio_fore (tcb)  \
+    :((tcb)->sched.class == cma__c_class_back ? cma__sched_prio_back (tcb)  \
+    :((tcb)->sched.class == cma__c_class_rt   ? cma__sched_prio_rt (tcb)    \
+    :((tcb)->sched.class == cma__c_class_idle ? cma__sched_prio_idle (tcb)  \
+    :(cma__bugcheck ("cma__sched_priority: unrecognized class"), 0) ))))
+
+#define cma__sched_prio_fore(tcb)	cma__sched_prio_fore_var (tcb)
+#define cma__sched_prio_back(tcb)	((tcb)->sched.fixed_prio	\
+	? cma__sched_prio_back_fix (tcb) : cma__sched_prio_back_var (tcb) )
+#define cma__sched_prio_rt(tcb)		((tcb)->sched.priority)
+#define cma__sched_prio_idle(tcb)	((tcb)->sched.priority)
+
+#define cma__sched_prio_back_fix(tcb)	\
+	(cma__g_prio_bg_min + (cma__g_prio_bg_max - cma__g_prio_bg_min) \
+	* ((tcb)->sched.priority + cma__c_prio_o_al - cma__c_prio_o_bg) \
+	/ cma__c_prio_n_bg)
+
+/*
+ * FIX-ME: Enable after modeling (if we like it)
+ */
+#if 1
+# define cma__sched_prio_fore_var(tcb)  \
+	((cma__g_prio_fg_max + cma__g_prio_fg_min)/2)
+# define cma__sched_prio_back_var(tcb)  \
+	((cma__g_prio_bg_max + cma__g_prio_bg_min)/2)
+#else
+# define cma__sched_prio_back_var(tcb)  cma__sched_prio_fore_var (tcb)
+
+# if 1
+/*
+ * Re-scale, since the division removes the scale factor.
+ * Scale and multiply before dividing to avoid loss of precision.
+ */
+#  define cma__sched_prio_fore_var(tcb)  \
+	((cma__g_vp_count * cma__scale_up((tcb)->sched.tot_time)) \
+	/ (tcb)->sched.cpu_time)
+# else
+/*
+ * Re-scale, since the division removes the scale factor.
+ * Scale and multiply before dividing to avoid loss of precision.
+ * Left shift the numerator to multiply by two.
+ */
+#  define cma__sched_prio_fore_var(tcb)  \
+    (((cma__g_vp_count * cma__scale_up((tcb)->sched.tot_time)  \
+    * (tcb)->sched.priority * cma__g_init_frac_sum) << 1)  \
+    / ((tcb)->sched.cpu_time * (tcb)->sched.priority * cma__g_init_frac_sum  \
+	+ (tcb)->sched.tot_time))
+# endif
+#endif
+
+/*
+ * Update weighted-averaged, scaled tick counters
+ */
+#define cma__sched_update_time(ave, new) \
+    (ave) = (ave) - ((cma__scale_dn((ave)) - (new)) << (cma__c_prio_scale - 4))
+
+#define cma__sched_parameterize(tcb, policy) { \
+    switch (policy) { \
+	case cma_c_sched_fifo : { \
+	    (tcb)->sched.rtb =		cma_c_true; \
+	    (tcb)->sched.spp =		cma_c_true; \
+	    (tcb)->sched.fixed_prio =	cma_c_true; \
+	    (tcb)->sched.class =	cma__c_class_rt; \
+	    break; \
+	    } \
+	case cma_c_sched_rr : { \
+	    (tcb)->sched.rtb =		cma_c_false; \
+	    (tcb)->sched.spp =		cma_c_true; \
+	    (tcb)->sched.fixed_prio =	cma_c_true; \
+	    (tcb)->sched.class =	cma__c_class_rt; \
+	    break; \
+	    } \
+	case cma_c_sched_throughput : { \
+	    (tcb)->sched.rtb =		cma_c_false; \
+	    (tcb)->sched.spp =		cma_c_false; \
+	    (tcb)->sched.fixed_prio =	cma_c_false; \
+	    (tcb)->sched.class =	cma__c_class_fore; \
+	    break; \
+	    } \
+	case cma_c_sched_background : { \
+	    (tcb)->sched.rtb =		cma_c_false; \
+	    (tcb)->sched.spp =		cma_c_false; \
+	    (tcb)->sched.fixed_prio =	cma_c_false; \
+	    (tcb)->sched.class =	cma__c_class_back; \
+	    break; \
+	    } \
+	case cma_c_sched_ada_low : { \
+	    (tcb)->sched.rtb =		cma_c_false; \
+	    (tcb)->sched.spp =		cma_c_true; \
+	    (tcb)->sched.fixed_prio =	cma_c_true; \
+	    (tcb)->sched.class =	cma__c_class_back; \
+	    break; \
+	    } \
+	case cma_c_sched_idle : { \
+	    (tcb)->sched.rtb =		cma_c_false; \
+	    (tcb)->sched.spp =		cma_c_false; \
+	    (tcb)->sched.fixed_prio =	cma_c_false; \
+	    (tcb)->sched.class =	cma__c_class_idle; \
+	    break; \
+	    } \
+	default : { \
+	    cma__bugcheck ("cma__sched_parameterize: bad scheduling Policy"); \
+	    break; \
+	    } \
+	} \
+    }
+
+/*
+ * TYPEDEFS
+ */
+
+/*
+ * Scheduling classes
+ */
+typedef enum CMA__T_SCHED_CLASS {
+    cma__c_class_rt,
+    cma__c_class_fore,
+    cma__c_class_back,
+    cma__c_class_idle
+    } cma__t_sched_class;
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * Minimuma and maximum prioirities, for foreground and background threads,
+ * as of the last time the scheduler ran.  (Scaled once.)
+ */
+extern cma_t_integer	cma__g_prio_fg_min;
+extern cma_t_integer	cma__g_prio_fg_max;
+extern cma_t_integer	cma__g_prio_bg_min;
+extern cma_t_integer	cma__g_prio_bg_max;
+
+/*
+ * The "m" values are the slopes of the four sections of linear approximation.
+ *
+ * cma__g_prio_m_I = 4*N(I)/cma__g_prio_range	    (Scaled once.)
+ */
+extern cma_t_integer	cma__g_prio_m_0,
+		    	cma__g_prio_m_1,
+		    	cma__g_prio_m_2,
+		    	cma__g_prio_m_3;
+
+/* 
+ * The "b" values are the intercepts of the four sections of linear approx.
+ *  (Not scaled.)
+ *
+ * cma__g_prio_b_I = -N(I)*(I*prio_max + (4-I)*prio_min)/prio_range + prio_o_I
+ */
+extern cma_t_integer	cma__g_prio_b_0,
+		    	cma__g_prio_b_1,
+		    	cma__g_prio_b_2,
+		    	cma__g_prio_b_3;
+
+/* 
+ * The "p" values are the end points of the four sections of linear approx.
+ *
+ * cma__g_prio_p_I = cma__g_prio_fg_min + (I/4)*cma__g_prio_range
+ *
+ * [cma__g_prio_p_0 is not defined since it is not used (also, it is the same
+ *  as cma__g_prio_fg_min).]	    (Scaled once.)
+ */
+extern cma_t_integer	cma__g_prio_p_1,
+		    	cma__g_prio_p_2,
+		    	cma__g_prio_p_3;
+
+/*
+ * Points to the next queue for the dispatcher to check for ready threads.
+ */
+extern cma_t_integer	cma__g_next_ready_queue;
+
+/*
+ * Points to the queues of virtual processors (for preempt victim search)
+ */
+extern cma__t_queue	cma__g_run_vps;
+extern cma__t_queue	cma__g_susp_vps;
+extern cma_t_integer	cma__g_vp_count;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+#endif
diff --git a/gdb/osf-share/cma_semaphore_defs.h b/gdb/osf-share/cma_semaphore_defs.h
new file mode 100644
index 0000000..e160de3
--- /dev/null
+++ b/gdb/osf-share/cma_semaphore_defs.h
@@ -0,0 +1,46 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for semaphore structure definition.
+ */
+#ifndef CMA_SEMAPHORE_DEFS
+#define CMA_SEMAPHORE_DEFS
+
+/*
+ *  INCLUDE FILES
+ */
+#include <cma.h>
+#include <cma_queue.h>
+#include <cma_defs.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma__c_semaphore_timeout 1
+#define cma__c_semaphore_event	 0
+#define cma__c_select_timeout	 2
+
+/*
+ * TYPEDEFS
+ */
+
+typedef struct CMA__T_SEMAPHORE {
+    cma__t_queue	queue;
+    cma__t_atomic_bit	nopending;
+    } cma__t_semaphore;
+
+#endif
diff --git a/gdb/osf-share/cma_sequence.h b/gdb/osf-share/cma_sequence.h
new file mode 100644
index 0000000..8d362ed
--- /dev/null
+++ b/gdb/osf-share/cma_sequence.h
@@ -0,0 +1,56 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for sequence generator functions
+ */
+
+#ifndef CMA_SEQUENCE
+#define CMA_SEQUENCE
+
+/*
+ *  INCLUDE FILES
+ */
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+/*
+ * TYPEDEFS
+ */
+
+#ifndef __STDC__
+struct CMA__T_INT_MUTEX;
+#endif
+
+typedef struct CMA__T_SEQUENCE {
+    struct CMA__T_INT_MUTEX	*mutex;	/* Serialize access to counter */
+    cma_t_natural		seq;	/* Sequence number for object */
+    } cma__t_sequence;
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern cma_t_natural cma__assign_sequence (cma__t_sequence *);
+
+extern void cma__init_sequence (cma__t_sequence *);	
+
+#endif
diff --git a/gdb/osf-share/cma_stack.h b/gdb/osf-share/cma_stack.h
new file mode 100644
index 0000000..97a41fd
--- /dev/null
+++ b/gdb/osf-share/cma_stack.h
@@ -0,0 +1,83 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for stack management
+ */
+#ifndef CMA_STACK
+#define CMA_STACK
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma_tcb_defs.h>
+#include <cma.h>
+#include <cma_attr.h>
+#include <cma_queue.h>
+#include <cma_stack_int.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#if _CMA_UNIPROCESSOR_
+# define cma__get_self_tcb()	(cma__g_current_thread)
+#endif
+
+/*
+ * Round the given value (a) upto cma__g_chunk_size
+ */
+#define cma__roundup_chunksize(a)   (cma__roundup(a,cma__g_chunk_size))
+
+/*
+ * TYPEDEFS
+ */
+
+/*
+ *  GLOBAL DATA
+ */
+
+extern cma__t_list	cma__g_stack_clusters;
+extern cma__t_int_tcb	*cma__g_current_thread;
+extern cma_t_integer	cma__g_chunk_size;
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void cma__assign_stack  (cma__t_int_stack *,cma__t_int_tcb *);
+
+extern void cma__free_stack  (cma__t_int_stack *);
+
+extern void cma__free_stack_list  (cma__t_queue *);
+
+#if !_CMA_UNIPROCESSOR_
+extern cma__t_int_tcb * cma__get_self_tcb  (void);
+#endif
+
+extern cma__t_int_tcb * cma__get_sp_tcb  (cma_t_address);
+
+extern cma__t_int_stack * cma__get_stack  (cma__t_int_attr *);
+
+extern void cma__init_stack  (void);
+
+extern void cma__reinit_stack  (cma_t_integer);
+
+#if _CMA_PROTECT_MEMORY_
+extern void cma__remap_stack_holes  (void);
+#endif
+
+#endif
diff --git a/gdb/osf-share/cma_stack_int.h b/gdb/osf-share/cma_stack_int.h
new file mode 100644
index 0000000..bf76f60
--- /dev/null
+++ b/gdb/osf-share/cma_stack_int.h
@@ -0,0 +1,136 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for stack management (internal to cma_stack.c, but
+ *	separate for convenience, and unit testing).
+ */
+
+#ifndef CMA_STACK_INT
+#define CMA_STACK_INT
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma.h>
+#include <cma_queue.h>
+#include <cma_list.h>
+#include <cma_tcb_defs.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma___c_first_free_chunk	0
+#define cma___c_min_count	2	/* Smallest number of chunks to leave */
+#define cma___c_end		(-1)	/* End of free list (flag) */
+#define cma__c_yellow_size	0
+
+/* 
+ * Cluster types
+ */
+#define cma___c_cluster  0	/* Default cluster */
+#define cma___c_bigstack 1	/* Looks like a cluster, but it's a stack */
+
+
+#define cma___c_null_cluster	(cma___t_cluster *)cma_c_null_ptr
+
+
+/*
+ * TYPEDEFS
+ */
+
+#ifndef __STDC__
+struct CMA__T_INT_STACK;
+#endif
+
+typedef cma_t_natural	cma___t_index;	/* Type for chunk index */
+
+typedef struct CMA___T_CLU_DESC {
+    cma__t_list		list;		/* Queue element for cluster list */
+    cma_t_integer	type;		/* Type of cluster */
+    cma_t_address	stacks;
+    cma_t_address	limit;
+    } cma___t_clu_desc;
+
+typedef union CMA___T_MAP_ENTRY {
+    struct {
+	cma__t_int_tcb	*tcb;		/* TCB associated with stack chunk */
+	struct CMA__T_INT_STACK	*stack;	/* Stack desc. ass. with stack chunk */
+	} mapped;
+    struct {
+	cma___t_index		size;	/* Number of chunks in block */
+	cma___t_index		next;	/* Next free block */
+	} free;
+    } cma___t_map_entry;
+
+/*
+ * NOTE: It is VERY IMPORTANT that both cma___t_cluster and cma___t_bigstack
+ * begin with the cma___t_clu_desc structure, as there is some code in the
+ * stack manager that relies on being able to treat both as equivalent!
+ */
+typedef struct CMA___T_CLUSTER {
+    cma___t_clu_desc	desc;		/* Describe this cluster */
+    cma___t_map_entry	map[cma__c_chunk_count];	/* thread map */
+    cma___t_index	free;		/* First free chunk index */
+    } cma___t_cluster;
+
+/*
+ * NOTE: It is VERY IMPORTANT that both cma___t_cluster and cma___t_bigstack
+ * begin with the cma___t_clu_desc structure, as there is some code in the
+ * stack manager that relies on being able to treat both as equivalent!
+ */
+typedef struct CMA___T_BIGSTACK {
+    cma___t_clu_desc	desc;		/* Describe this cluster */
+    cma__t_int_tcb	*tcb;		/* TCB associated with stack */
+    struct CMA__T_INT_STACK	*stack;	/* Stack desc. ass. with stack */
+    cma_t_natural	size;		/* Size of big stack */
+    cma_t_boolean	in_use;		/* Set if allocated */
+    } cma___t_bigstack;
+
+#if _CMA_PROTECT_MEMORY_
+typedef struct CMA___T_INT_HOLE {
+    cma__t_queue	link;		/* Link holes together */
+    cma_t_boolean	protected;	/* Set when pages are protected */
+    cma_t_address	first;		/* First protected byte */
+    cma_t_address	last;		/* Last protected byte */
+    } cma___t_int_hole;
+#endif
+
+typedef struct CMA__T_INT_STACK {
+    cma__t_object	header;		/* Common header (sequence, type info */
+    cma__t_int_attr	*attributes;	/* Backpointer to attr obj */
+    cma___t_cluster	*cluster;	/* Stack's cluster */
+    cma_t_address	stack_base;	/* base address of stack */
+    cma_t_address	yellow_zone;	/* first address of yellow zone */
+    cma_t_address	last_guard;	/* last address of guard pages */
+    cma_t_natural	first_chunk;	/* First chunk allocated */
+    cma_t_natural	chunk_count;	/* Count of chunks allocated */
+    cma__t_int_tcb	*tcb;		/* TCB backpointer */
+#if _CMA_PROTECT_MEMORY_
+    cma___t_int_hole	hole;		/* Description of hole */
+#endif
+    } cma__t_int_stack;
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+#endif
diff --git a/gdb/osf-share/cma_tcb_defs.h b/gdb/osf-share/cma_tcb_defs.h
new file mode 100644
index 0000000..6622050
--- /dev/null
+++ b/gdb/osf-share/cma_tcb_defs.h
@@ -0,0 +1,269 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	TCB-related type definitions.
+ */
+
+#ifndef CMA_TCB_DEFS
+#define CMA_TCB_DEFS
+
+/*
+ *  INCLUDE FILES
+ */
+# if !_CMA_THREAD_SYNC_IO_
+#  include <cma_thread_io.h>
+# endif
+#include <cma.h>
+#include <cma_debug_client.h>
+#include <cma_attr.h>
+#include <cma_defs.h>
+#include <cma_handle.h>
+#include <cma_queue.h>
+#if _CMA_OS_ == _CMA__UNIX
+# if defined(SNI_DCOSX)
+#   include <sys/ucontext.h>
+# endif
+# include <signal.h>
+#endif
+#include <cma_sched.h>
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#if _CMA_PLATFORM_ == _CMA__IBMR2_UNIX
+# define cma__c_ibmr2_ctx_stack_size	2048
+# define cma__c_ibmr2_ctx_stack_top	(cma__c_ibmr2_ctx_stack_size - 1)
+#endif
+
+/*
+ * TYPEDEFS
+ */
+
+#ifndef __STDC__
+# if _CMA_HARDWARE_ != _CMA__HPPA
+struct CMA__T_SEMAPHORE;
+# endif
+struct CMA__T_INT_CV;
+struct CMA__T_INT_MUTEX;
+struct CMA__T_INT_TCB;
+#endif
+
+typedef cma_t_address		*cma__t_context_list;
+
+typedef struct CMA__T_TCB_PAD {
+    /* 
+     * Adjust to align the tcb prolog at byte 32.
+     * 12 bytes are required as object header is currently 
+     * 20 bytes long.
+     */
+    cma_t_integer	pad1;		/* pad bytes */
+    cma_t_integer	pad2;		/* pad bytes */
+    cma_t_integer	pad3;		/* pad bytes */
+    } cma__t_tcb_pad;
+
+#if (_CMA_OS_ == _CMA__UNIX) && !_CMA_THREAD_SYNC_IO_
+typedef struct CMA__T_TCB_SELECT {
+    cma__t_queue	queue;
+#if (_CMA_UNIX_TYPE !=  _CMA__SVR4)
+	cma__t_file_mask    *rfds;
+	cma__t_file_mask    *wfds;
+	cma__t_file_mask    *efds;
+#else
+	cma__t_poll_info 	poll_info;
+#endif /* (_CMA_UNIX_TYPE !=  _CMA__SVR4) */
+    cma_t_integer	nfound;
+    } cma__t_tcb_select;
+#endif
+
+typedef struct CMA__T_TCB_TIME {
+    cma__t_queue	queue;		/* must be first entry! */
+    cma_t_integer	mode;
+    struct CMA__T_SEMAPHORE *semaphore;	/* used for timed semaphores */
+    cma_t_date_time	wakeup_time;
+    cma_t_integer	quanta_remaining;
+    } cma__t_tcb_time;
+
+typedef enum CMA__T_DEBEVT {
+	cma__c_debevt_activating = 1,	/* First transition to running */
+	cma__c_debevt_running = 2,	/* Any transition to running */
+	cma__c_debevt_preempting = 3,	/* Preemted (replaced) another thread */
+	cma__c_debevt_blocking = 4,	/* Any transition to blocked */
+	cma__c_debevt_terminating = 5,	/* Final state transition */
+	cma__c_debevt_term_alert = 6,	/* Terminated due to alert/cancel */
+	cma__c_debevt_term_exc = 7,	/* Terminated due to exception */
+	cma__c_debevt_exc_handled = 8	/* Exception is being handled */
+	} cma__t_debevt;
+
+#define cma__c_debevt__first ((cma_t_integer)cma__c_debevt_activating)
+#define cma__c_debevt__last  ((cma_t_integer)cma__c_debevt_exc_handled)
+#define cma__c_debevt__dim (cma__c_debevt__last + 1)
+
+/* 
+ * Type defining thread substate, which is used by the debugger.
+ * If the state is blocked, substate indicates WHY the thread is blocked.
+ */
+typedef enum CMA__T_SUBSTATE {
+    cma__c_substa_normal = 0,
+    cma__c_substa_mutex = 1,
+    cma__c_substa_cv = 2,
+    cma__c_substa_timed_cv = 3,
+    cma__c_substa_term_alt = 4,
+    cma__c_substa_term_exc = 5,
+    cma__c_substa_delay =6,
+    cma__c_substa_not_yet_run = 7
+    } cma__t_substate;
+#define cma__c_substa__first ((cma_t_integer)cma__c_substa_normal)
+#define cma__c_substa__last  ((cma_t_integer)cma__c_substa_not_yet_run)
+#define cma__c_substa__dim (cma__c_substa__last + 1)
+
+
+/*
+ * Per-thread state for the debugger
+ */
+typedef struct CMA__T_TCB_DEBUG {
+    cma_t_boolean	on_hold;	/* Thread was put on hold by debugger */
+    cma_t_boolean	activated;	/* Activation event was reported */
+    cma_t_boolean	did_preempt;	/* Thread preempted prior one */
+    cma_t_address	start_pc;	/* Start routine address */
+    cma_t_address	object_addr;	/* Addr of thread object */
+    cma__t_substate	substate;	/* Reason blocked, terminated, etc.*/
+    cma_t_boolean	notify_debugger;/* Notify debugger thread is running */
+    cma_t_address	SPARE2;		/* SPARE */
+    cma_t_address	SPARE3;		/* SPARE */
+    struct CMA__T_INT_TCB	
+			*preempted_tcb;	/* TCB of thread that got preempted */
+    cma_t_boolean	flags[cma__c_debevt__dim]; 	
+					/* Events enabled for this thread */
+    } cma__t_tcb_debug;
+
+typedef struct CMA__T_TCB_SCHED {
+    cma_t_integer	adj_time;	/* Abs. time in ticks of last prio adj */
+    cma_t_integer	tot_time;	/* Weighted ave in ticks (scaled) */
+    cma_t_integer	time_stamp;	/* Abs. time in ticks of last update */
+    cma_t_integer	cpu_time;	/* Weighted average in ticks */
+    cma_t_integer	cpu_ticks;	/* # of ticks while comp. (scaled) */
+    cma_t_integer	q_num;		/* Number of last ready queue on */
+    cma_t_priority	priority;	/* Thread priority */
+    cma_t_sched_policy  policy;         /* Scheduling policy of thread */
+    cma_t_boolean	rtb;		/* "Run 'Till Block" scheduling */
+    cma_t_boolean	spp;		/* "Strict Priority Preemption" sched */
+    cma_t_boolean	fixed_prio;	/* Fixed priority */
+    cma__t_sched_class	class;		/* Scheduling class */
+    struct CMA__T_VP	*processor;	/* Current processor (if running) */
+    } cma__t_tcb_sched;
+
+typedef struct CMA__T_INT_ALERT {
+    cma_t_boolean	pending : 1;	/* alert_pending bit */
+    cma_t_boolean	g_enable : 1;	/* general delivery state */
+    cma_t_boolean	a_enable : 1;	/* asynchronous delivery state */
+    cma_t_integer	spare : 29;	/* Pad to longword */
+    cma_t_natural	count;		/* Alert scope nesting count */
+    } cma__t_int_alert;
+
+typedef enum CMA__T_STATE {
+    cma__c_state_running = 0,		/* For consistency with initial TCB */
+    cma__c_state_ready	= 1,
+    cma__c_state_blocked = 2,
+    cma__c_state_terminated = 3
+    } cma__t_state;
+#define cma__c_state__first ((cma_t_integer)cma__c_state_running)
+#define cma__c_state__last  ((cma_t_integer)cma__c_state_terminated)
+#define cma__c_state__dim (cma__c_state__last + 1)
+
+typedef enum CMA__T_THKIND {
+    cma__c_thkind_initial = 0,		/* Initial thread */
+    cma__c_thkind_normal = 1,		/* Normal thread */
+    cma__c_thkind_null	= 2		/* A null thread */
+    } cma__t_thkind;
+#define cma__c_thkind__first ((cma_t_integer)cma__c_thkind_initial)
+#define cma__c_thkind__last  ((cma_t_integer)cma__c_thkind_null)
+#define cma__c_thkind__dim (cma__c_thkind__last + 1)
+
+typedef enum CMA__T_SYSCALL_STATE {
+	cma__c_syscall_ok = 1,                      /* syscall was not interrupted */
+	cma__c_syscall_intintrpt = 1,       /* syscall was interrupted by VTALRM */
+	cma__c_syscall_extintrpt = 2        /* syscall was interrupted by external signal */
+	} cma__t_syscall_state;
+
+
+typedef struct CMA__T_INT_TCB {
+    /* 
+     * Fixed part of TCB.
+     *   Modifications to the following three fields must be coordinated.  
+     *   The object header must always be first, and the prolog must always 
+     *   remain at the same offset (32) for all time. Thus the object header
+     *   must never grow beyond a maximum of 32 bytes.
+     */
+    cma__t_object	header;		/* Common object header */
+    cma__t_tcb_pad	pad1;		/* Pad required to align prolog */
+    cma_t_tcb_prolog	prolog;		/* Standard prolog for tasks, threads */
+
+    /* 
+     * Floating part of TCB (fields here on are free to be moved and resized).
+     */
+    cma__t_queue	threads;	/* List of all known threads */
+    cma__t_int_attr	*attributes;	/* Backpointer to attr obj */
+    cma__t_state	state;		/* Current state of thread */
+    cma__t_thkind	kind;		/* Which kind of thread */
+    struct CMA__T_INT_MUTEX 
+			*mutex;		/* Mutex to control TCB access */
+    struct CMA__T_INT_CV 
+			*term_cv;	/* CV for join */
+    struct CMA__T_INT_MUTEX 
+			*tswait_mutex;	/* Mutex for thread-synchronous waits */
+    struct CMA__T_INT_CV 
+			*tswait_cv;	/* CV for thread-synchronous waits */
+    cma_t_start_routine	start_code;	/* Address of start routine */
+    cma_t_address	start_arg;	/* Argument to pass to start_code */
+    cma__t_queue	stack;		/* Queue header for stack descr. */
+    cma_t_natural	context_count;	/* Size of context array */
+    cma__t_context_list	contexts;	/* Context value array pointer */
+    cma_t_exit_status	exit_status;	/* Exit status of thread */
+    cma_t_address	return_value;	/* Thread's return value */
+    cma__t_async_ctx	async_ctx;	/* Asynchronous context switch info */
+    cma__t_static_ctx	static_ctx;	/* Static context switch information */
+    cma_t_integer	event_status;	/* Status of semaphore operation */
+    cma__t_tcb_time	timer;		/* Time info for dispatcher */
+    cma__t_tcb_sched	sched;		/* Scheduler info */
+    cma__t_tcb_debug	debug;		/* Debugger info */
+#if _CMA_OS_ == _CMA__UNIX
+# if !_CMA_THREAD_SYNC_IO_
+    cma__t_tcb_select	select;		/* Select info for timed selects */
+# endif
+    struct sigaction	sigaction_data[NSIG];
+#endif
+    cma_t_natural       syscall_state; /* set if one of the cma wrapped syscalls was interrupted. */
+    cma_t_boolean	detached;	/* Set if already detached */
+    cma_t_boolean	terminated;	/* Set if terminated */
+    cma_t_integer	joiners;	/* Count of joiners, for zombie frees */
+    cma__t_int_alert	alert;		/* Current alert state info */
+    struct CMA__T_INT_CV 
+			*wait_cv;	/* CV thread is currently waiting on */
+    struct CMA__T_INT_MUTEX 
+			*wait_mutex;	/* Mutex thread is waiting on */
+    struct EXC_CONTEXT_T
+			*exc_stack;	/* Top of exception stack */
+#if _CMA_PLATFORM_ == _CMA__IBMR2_UNIX
+    char		ctx_stack[cma__c_ibmr2_ctx_stack_size];
+#endif
+    cma_t_integer	thd_errno;	/* Per-thread errno value */
+#if _CMA_OS_ == _CMA__VMS
+    cma_t_integer	thd_vmserrno;	/* Per-thread VMS errno value */
+#endif
+    } cma__t_int_tcb;
+
+#endif
diff --git a/gdb/osf-share/cma_util.h b/gdb/osf-share/cma_util.h
new file mode 100644
index 0000000..00451c4
--- /dev/null
+++ b/gdb/osf-share/cma_util.h
@@ -0,0 +1,125 @@
+/* 
+ * (c) Copyright 1990-1996 OPEN SOFTWARE FOUNDATION, INC.
+ * (c) Copyright 1990-1996 HEWLETT-PACKARD COMPANY
+ * (c) Copyright 1990-1996 DIGITAL EQUIPMENT CORPORATION
+ * (c) Copyright 1991, 1992 Siemens-Nixdorf Information Systems
+ * To anyone who acknowledges that this file is provided "AS IS" without
+ * any express or implied warranty: permission to use, copy, modify, and
+ * distribute this file for any purpose is hereby granted without fee,
+ * provided that the above copyright notices and this notice appears in
+ * all source code copies, and that none of the names listed above be used
+ * in advertising or publicity pertaining to distribution of the software
+ * without specific, written prior permission.  None of these organizations
+ * makes any representations about the suitability of this software for
+ * any purpose.
+ */
+/*
+ *	Header file for CMA internal UTIL operations
+ */
+
+#ifndef	CMA_UTIL
+#define CMA_UTIL
+
+/*
+ *  INCLUDE FILES
+ */
+
+#include <cma.h>
+#include <cma_attr.h>
+#include <cma_defs.h>
+
+#if _CMA_OS_ == _CMA__VMS
+# include <cma_rms.h>
+#endif
+
+#if _CMA_VENDOR_ == _CMA__SUN
+# include <sys/time.h>
+#else
+# include <time.h>
+#endif
+
+#if _CMA_OS_ == _CMA__UNIX
+# include <stdio.h>
+#endif
+
+/*
+ * CONSTANTS AND MACROS
+ */
+
+#define cma__c_buffer_size  256		    /* Size of output buffer	    */
+
+/*
+ * TYPEDEFS
+ */
+
+/* 
+ * Alternate eol routine
+ */
+typedef void (*cma__t_eol_routine) (char *);
+
+#if _CMA_OS_ == _CMA__VMS
+ typedef struct CMA__T_VMSFILE {
+    struct RAB	rab;
+    struct FAB	fab;
+    } cma__t_vmsfile, 	*cma__t_file;
+#elif  ( _CMA_UNIX_TYPE == _CMA__SVR4 )
+ typedef int           cma__t_file;
+#else
+ typedef FILE		*cma__t_file;
+#endif
+
+/*
+ *  GLOBAL DATA
+ */
+
+/*
+ * INTERNAL INTERFACES
+ */
+
+extern void cma__abort  (void);
+
+extern cma_t_integer cma__atol  (char *);
+
+extern cma_t_integer cma__atoi  (char *);
+
+extern char * cma__getenv  (char *,char *,int);
+
+extern int cma__gettimespec  (struct timespec *);
+
+extern cma__t_file cma__int_fopen  (char *,char *);
+
+#ifndef NDEBUG
+extern void cma__init_trace  (char *_env);
+#endif
+
+extern char * cma__memcpy  (char *,char *,cma_t_integer);
+	
+#ifndef cma__memset
+extern char * cma__memset  (char *,cma_t_integer,cma_t_integer);
+#endif
+
+extern void cma__putformat  (char *,char *,...);
+
+extern void cma__putstring  (char *,char *);
+
+extern void cma__putint  (char *,cma_t_integer);
+
+extern void cma__putint_5  (char *,cma_t_integer);
+
+extern void cma__putint_10  (char *,cma_t_integer);
+
+extern void cma__puthex  (char *,cma_t_integer);
+
+extern void cma__puthex_8  (char *,cma_t_integer);
+
+extern void cma__puteol  (char *);
+
+extern void cma__set_eol_routine  (cma__t_eol_routine,cma__t_eol_routine *);
+
+extern cma_t_integer cma__strlen  (char *);
+
+extern int cma__strncmp  (char *,char *,cma_t_integer);
+
+extern char *cma__gets (char *,char *);
+
+#endif
diff --git a/gdb/osfsolib.c b/gdb/osfsolib.c
new file mode 100644
index 0000000..31c9bf9
--- /dev/null
+++ b/gdb/osfsolib.c
@@ -0,0 +1,980 @@
+/* Handle OSF/1 shared libraries for GDB, the GNU Debugger.
+   Copyright 1993, 94, 95, 96, 98, 1999 Free Software Foundation, Inc.
+   
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* FIXME: Most of this code could be merged with solib.c by using
+   next_link_map_member and xfer_link_map_member in solib.c.  */
+
+#include "defs.h"
+
+#include <sys/types.h>
+#include <signal.h>
+#include "gdb_string.h"
+#include <fcntl.h>
+
+#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "target.h"
+#include "frame.h"
+#include "gnu-regex.h"
+#include "inferior.h"
+#include "language.h"
+#include "gdbcmd.h"
+
+#define MAX_PATH_SIZE 1024		/* FIXME: Should be dynamic */
+
+/* When handling shared libraries, GDB has to find out the pathnames
+   of all shared libraries that are currently loaded (to read in their
+   symbols) and where the shared libraries are loaded in memory
+   (to relocate them properly from their prelinked addresses to the
+   current load address).
+
+   Under OSF/1 there are two possibilities to get at this information:
+   1) Peek around in the runtime loader structures.
+      These are not documented, and they are not defined in the system
+      header files. The definitions below were obtained by experimentation,
+      but they seem stable enough.
+   2) Use the undocumented libxproc.a library, which contains the
+      equivalent ldr_* routines.
+      This approach is somewhat cleaner, but it requires that the GDB
+      executable is dynamically linked. In addition it requires a
+      NAT_CLIBS= -lxproc -Wl,-expect_unresolved,ldr_process_context
+      linker specification for GDB and all applications that are using
+      libgdb.
+   We will use the peeking approach until it becomes unwieldy.  */
+
+#ifndef USE_LDR_ROUTINES
+
+/* Definition of runtime loader structures, found by experimentation.  */
+#define RLD_CONTEXT_ADDRESS	0x3ffc0000000
+
+typedef struct
+{
+	CORE_ADDR next;
+	CORE_ADDR previous;
+	CORE_ADDR unknown1;
+	char *module_name;
+	CORE_ADDR modinfo_addr;
+	long module_id;
+	CORE_ADDR unknown2;
+	CORE_ADDR unknown3;
+	long region_count;
+	CORE_ADDR regioninfo_addr;
+} ldr_module_info_t;
+
+typedef struct
+{
+	long unknown1;
+	CORE_ADDR regionname_addr;
+	long protection;
+	CORE_ADDR vaddr;
+	CORE_ADDR mapaddr;
+	long size;
+	long unknown2[5];
+} ldr_region_info_t;
+
+typedef struct
+{
+	CORE_ADDR unknown1;
+	CORE_ADDR unknown2;
+	CORE_ADDR head;
+	CORE_ADDR tail;
+} ldr_context_t;
+
+static ldr_context_t ldr_context;
+
+#else
+
+#include <loader.h>
+static ldr_process_t fake_ldr_process;
+
+/* Called by ldr_* routines to read memory from the current target.  */
+
+static int ldr_read_memory PARAMS ((CORE_ADDR, char *, int, int));
+
+static int
+ldr_read_memory (memaddr, myaddr, len, readstring)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int readstring;
+{
+  int result;
+  char *buffer;
+
+  if (readstring)
+    {
+      target_read_string (memaddr, &buffer, len, &result);
+      if (result == 0)
+        strcpy (myaddr, buffer);
+      free (buffer);
+    }
+  else
+    result = target_read_memory (memaddr, myaddr, len);
+
+  if (result != 0)
+    result = -result;
+  return result;
+}
+
+#endif
+
+/* Define our own link_map structure.
+   This will help to share code with solib.c.  */
+
+struct link_map {
+  CORE_ADDR l_offset;			/* prelink to load address offset */
+  char *l_name;				/* full name of loaded object */
+  ldr_module_info_t module_info;	/* corresponding module info */
+};
+
+#define LM_OFFSET(so) ((so) -> lm.l_offset)
+#define LM_NAME(so) ((so) -> lm.l_name)
+
+struct so_list {
+  struct so_list *next;			/* next structure in linked list */
+  struct link_map lm;			/* copy of link map from inferior */
+  struct link_map *lmaddr;		/* addr in inferior lm was read from */
+  CORE_ADDR lmend;			/* upper addr bound of mapped object */
+  char so_name[MAX_PATH_SIZE];		/* shared object lib name (FIXME) */
+  char symbols_loaded;			/* flag: symbols read in yet? */
+  char from_tty;			/* flag: print msgs? */
+  struct objfile *objfile;		/* objfile for loaded lib */
+  struct section_table *sections;
+  struct section_table *sections_end;
+  struct section_table *textsection;
+  bfd *abfd;
+};
+
+static struct so_list *so_list_head;	/* List of known shared objects */
+
+extern int
+fdmatch PARAMS ((int, int));		/* In libiberty */
+
+/* Local function prototypes */
+
+static void
+sharedlibrary_command PARAMS ((char *, int));
+
+static void
+info_sharedlibrary_command PARAMS ((char *, int));
+
+static int
+symbol_add_stub PARAMS ((char *));
+
+static struct so_list *
+find_solib PARAMS ((struct so_list *));
+
+static struct link_map *
+first_link_map_member PARAMS ((void));
+
+static struct link_map *
+next_link_map_member PARAMS ((struct so_list *));
+
+static void
+xfer_link_map_member PARAMS ((struct so_list *, struct link_map *));
+
+static int
+solib_map_sections PARAMS ((char *));
+
+/*
+
+LOCAL FUNCTION
+
+	solib_map_sections -- open bfd and build sections for shared lib
+
+SYNOPSIS
+
+	static int solib_map_sections (struct so_list *so)
+
+DESCRIPTION
+
+	Given a pointer to one of the shared objects in our list
+	of mapped objects, use the recorded name to open a bfd
+	descriptor for the object, build a section table, and then
+	relocate all the section addresses by the base address at
+	which the shared object was mapped.
+
+FIXMES
+
+	In most (all?) cases the shared object file name recorded in the
+	dynamic linkage tables will be a fully qualified pathname.  For
+	cases where it isn't, do we really mimic the systems search
+	mechanism correctly in the below code (particularly the tilde
+	expansion stuff?).
+ */
+
+static int
+solib_map_sections (arg)
+     char *arg;
+{
+  struct so_list *so = (struct so_list *) arg;	/* catch_errors bogon */
+  char *filename;
+  char *scratch_pathname;
+  int scratch_chan;
+  struct section_table *p;
+  struct cleanup *old_chain;
+  bfd *abfd;
+  
+  filename = tilde_expand (so -> so_name);
+  old_chain = make_cleanup (free, filename);
+  
+  scratch_chan = openp (getenv ("PATH"), 1, filename, O_RDONLY, 0,
+			&scratch_pathname);
+  if (scratch_chan < 0)
+    {
+      scratch_chan = openp (getenv ("LD_LIBRARY_PATH"), 1, filename,
+			    O_RDONLY, 0, &scratch_pathname);
+    }
+  if (scratch_chan < 0)
+    {
+      perror_with_name (filename);
+    }
+  /* Leave scratch_pathname allocated.  bfd->name will point to it.  */
+
+  abfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan);
+  if (!abfd)
+    {
+      close (scratch_chan);
+      error ("Could not open `%s' as an executable file: %s",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  /* Leave bfd open, core_xfer_memory and "info files" need it.  */
+  so -> abfd = abfd;
+  abfd -> cacheable = true;
+
+  if (!bfd_check_format (abfd, bfd_object))
+    {
+      error ("\"%s\": not in executable format: %s.",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  if (build_section_table (abfd, &so -> sections, &so -> sections_end))
+    {
+      error ("Can't find the file sections in `%s': %s", 
+	     bfd_get_filename (exec_bfd), bfd_errmsg (bfd_get_error ()));
+    }
+
+  for (p = so -> sections; p < so -> sections_end; p++)
+    {
+      /* Relocate the section binding addresses as recorded in the shared
+	 object's file by the offset to get the address to which the
+	 object was actually mapped.  */
+      p -> addr += LM_OFFSET (so);
+      p -> endaddr += LM_OFFSET (so);
+      so -> lmend = (CORE_ADDR) max (p -> endaddr, so -> lmend);
+      if (STREQ (p -> the_bfd_section -> name, ".text"))
+	{
+	  so -> textsection = p;
+	}
+    }
+
+  /* Free the file names, close the file now.  */
+  do_cleanups (old_chain);
+
+  return (1);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	first_link_map_member -- locate first member in dynamic linker's map
+
+SYNOPSIS
+
+	static struct link_map *first_link_map_member (void)
+
+DESCRIPTION
+
+	Read in a copy of the first member in the inferior's dynamic
+	link map from the inferior's dynamic linker structures, and return
+	a pointer to the copy in our address space.
+*/
+
+static struct link_map *
+first_link_map_member ()
+{
+  struct link_map *lm = NULL;
+  static struct link_map first_lm;
+
+#ifdef USE_LDR_ROUTINES
+  ldr_module_t mod_id = LDR_NULL_MODULE;
+  size_t retsize;
+
+  fake_ldr_process = ldr_core_process ();
+  ldr_set_core_reader (ldr_read_memory);
+  ldr_xdetach (fake_ldr_process);
+  if (ldr_xattach (fake_ldr_process) != 0
+      || ldr_next_module(fake_ldr_process, &mod_id) != 0
+      || mod_id == LDR_NULL_MODULE
+      || ldr_inq_module(fake_ldr_process, mod_id,
+			&first_lm.module_info, sizeof(ldr_module_info_t),
+			&retsize) != 0)
+    return lm;
+#else
+  CORE_ADDR ldr_context_addr;
+
+  if (target_read_memory ((CORE_ADDR) RLD_CONTEXT_ADDRESS,
+			  (char *) &ldr_context_addr,
+			  sizeof (CORE_ADDR)) != 0
+      || target_read_memory (ldr_context_addr,
+			     (char *) &ldr_context,
+			     sizeof (ldr_context_t)) != 0
+      || target_read_memory ((CORE_ADDR) ldr_context.head,
+			     (char *) &first_lm.module_info,
+			     sizeof (ldr_module_info_t)) != 0)
+    return lm;
+#endif
+
+  lm = &first_lm;
+
+  /* The first entry is for the main program and should be skipped.  */
+  lm->l_name = NULL;
+
+  return lm;
+}
+
+static struct link_map *
+next_link_map_member (so_list_ptr)
+     struct so_list *so_list_ptr;
+{
+  struct link_map *lm = NULL;
+  static struct link_map next_lm;
+#ifdef USE_LDR_ROUTINES
+  ldr_module_t mod_id = so_list_ptr->lm.module_info.lmi_modid;
+  size_t retsize;
+
+  if (ldr_next_module(fake_ldr_process, &mod_id) != 0
+      || mod_id == LDR_NULL_MODULE
+      || ldr_inq_module(fake_ldr_process, mod_id,
+			&next_lm.module_info, sizeof(ldr_module_info_t),
+			&retsize) != 0)
+    return lm;
+
+  lm = &next_lm;
+  lm->l_name = lm->module_info.lmi_name;
+#else
+  CORE_ADDR ldr_context_addr;
+
+  /* Reread context in case ldr_context.tail was updated.  */
+
+  if (target_read_memory ((CORE_ADDR) RLD_CONTEXT_ADDRESS,
+			  (char *) &ldr_context_addr,
+			  sizeof (CORE_ADDR)) != 0
+      || target_read_memory (ldr_context_addr,
+			     (char *) &ldr_context,
+			     sizeof (ldr_context_t)) != 0
+      || so_list_ptr->lm.module_info.modinfo_addr == ldr_context.tail
+      || target_read_memory (so_list_ptr->lm.module_info.next,
+			     (char *) &next_lm.module_info,
+			     sizeof (ldr_module_info_t)) != 0)
+    return lm;
+
+  lm = &next_lm;
+  lm->l_name = lm->module_info.module_name;
+#endif
+  return lm;
+}
+
+static void
+xfer_link_map_member (so_list_ptr, lm)
+     struct so_list *so_list_ptr;
+     struct link_map *lm;
+{
+  int i;
+  so_list_ptr->lm = *lm;
+
+  /* OSF/1 shared libraries are pre-linked to particular addresses,
+     but the runtime loader may have to relocate them if the
+     address ranges of the libraries used by the target executable clash,
+     or if the target executable is linked with the -taso option.
+     The offset is the difference between the address where the shared
+     library is mapped and the pre-linked address of the shared library.
+
+     FIXME:  GDB is currently unable to relocate the shared library
+     sections by different offsets. If sections are relocated by
+     different offsets, put out a warning and use the offset of the
+     first section for all remaining sections.  */
+  LM_OFFSET (so_list_ptr) = 0;
+
+  /* There is one entry that has no name (for the inferior executable)
+     since it is not a shared object. */
+  if (LM_NAME (so_list_ptr) != 0)
+    {
+
+#ifdef USE_LDR_ROUTINES
+      int len = strlen (LM_NAME (so_list_ptr) + 1);
+
+      if (len > MAX_PATH_SIZE)
+	len = MAX_PATH_SIZE;
+      strncpy (so_list_ptr->so_name, LM_NAME (so_list_ptr), MAX_PATH_SIZE);
+      so_list_ptr->so_name[MAX_PATH_SIZE - 1] = '\0';
+
+      for (i = 0; i < lm->module_info.lmi_nregion; i++)
+	{
+	  ldr_region_info_t region_info;
+	  size_t retsize;
+	  CORE_ADDR region_offset;
+
+	  if (ldr_inq_region (fake_ldr_process, lm->module_info.lmi_modid,
+			      i, &region_info, sizeof (region_info),
+			      &retsize) != 0)
+	    break;
+	  region_offset = (CORE_ADDR) region_info.lri_mapaddr
+			  - (CORE_ADDR) region_info.lri_vaddr;
+	  if (i == 0)
+	    LM_OFFSET (so_list_ptr) = region_offset;
+	  else if (LM_OFFSET (so_list_ptr) != region_offset)
+	    warning ("cannot handle shared library relocation for %s (%s)",
+		     so_list_ptr->so_name, region_info.lri_name);
+	}
+#else
+      int errcode;
+      char *buffer;
+      target_read_string ((CORE_ADDR) LM_NAME (so_list_ptr), &buffer,
+			  MAX_PATH_SIZE - 1, &errcode);
+      if (errcode != 0)
+	error ("xfer_link_map_member: Can't read pathname for load map: %s\n",
+	       safe_strerror (errcode));
+      strncpy (so_list_ptr->so_name, buffer, MAX_PATH_SIZE - 1);
+      free (buffer);
+      so_list_ptr->so_name[MAX_PATH_SIZE - 1] = '\0';
+
+      for (i = 0; i < lm->module_info.region_count; i++)
+	{
+	  ldr_region_info_t region_info;
+	  CORE_ADDR region_offset;
+
+	  if (target_read_memory (lm->module_info.regioninfo_addr
+				   + i * sizeof (region_info),
+				  (char *) &region_info,
+				  sizeof (region_info)) != 0)
+	    break;
+	  region_offset = region_info.mapaddr - region_info.vaddr;
+	  if (i == 0)
+	    LM_OFFSET (so_list_ptr) = region_offset;
+	  else if (LM_OFFSET (so_list_ptr) != region_offset)
+	    {
+	      char *region_name;
+	      target_read_string (region_info.regionname_addr, &buffer,
+				  MAX_PATH_SIZE - 1, &errcode);
+	      if (errcode == 0)
+		region_name = buffer;
+	      else
+		region_name = "??";
+	      warning ("cannot handle shared library relocation for %s (%s)",
+		        so_list_ptr->so_name, region_name);
+	      free (buffer);
+	    }
+	}
+#endif
+
+      catch_errors (solib_map_sections, (char *) so_list_ptr,
+		    "Error while mapping shared library sections:\n",
+		    RETURN_MASK_ALL);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	find_solib -- step through list of shared objects
+
+SYNOPSIS
+
+	struct so_list *find_solib (struct so_list *so_list_ptr)
+
+DESCRIPTION
+
+	This module contains the routine which finds the names of any
+	loaded "images" in the current process. The argument in must be
+	NULL on the first call, and then the returned value must be passed
+	in on subsequent calls. This provides the capability to "step" down
+	the list of loaded objects. On the last object, a NULL value is
+	returned.
+
+	The arg and return value are "struct link_map" pointers, as defined
+	in <link.h>.
+ */
+
+static struct so_list *
+find_solib (so_list_ptr)
+     struct so_list *so_list_ptr;	/* Last lm or NULL for first one */
+{
+  struct so_list *so_list_next = NULL;
+  struct link_map *lm = NULL;
+  struct so_list *new;
+  
+  if (so_list_ptr == NULL)
+    {
+      /* We are setting up for a new scan through the loaded images. */
+      if ((so_list_next = so_list_head) == NULL)
+	{
+	  /* Find the first link map list member. */
+	  lm = first_link_map_member ();
+	}
+    }
+  else
+    {
+      /* We have been called before, and are in the process of walking
+	 the shared library list.  Advance to the next shared object. */
+      lm = next_link_map_member (so_list_ptr);
+      so_list_next = so_list_ptr -> next;
+    }
+  if ((so_list_next == NULL) && (lm != NULL))
+    {
+      /* Get next link map structure from inferior image and build a local
+	 abbreviated load_map structure */
+      new = (struct so_list *) xmalloc (sizeof (struct so_list));
+      memset ((char *) new, 0, sizeof (struct so_list));
+      new -> lmaddr = lm;
+      /* Add the new node as the next node in the list, or as the root
+	 node if this is the first one. */
+      if (so_list_ptr != NULL)
+	{
+	  so_list_ptr -> next = new;
+	}
+      else
+	{
+	  so_list_head = new;
+	}      
+      so_list_next = new;
+      xfer_link_map_member (new, lm);
+    }
+  return (so_list_next);
+}
+
+/* A small stub to get us past the arg-passing pinhole of catch_errors.  */
+
+static int
+symbol_add_stub (arg)
+     char *arg;
+{
+  register struct so_list *so = (struct so_list *) arg;	/* catch_errs bogon */
+  CORE_ADDR text_addr = 0;
+
+  if (so -> textsection)
+    text_addr = so -> textsection -> addr;
+  else if (so -> abfd != NULL)
+    {
+      asection *lowest_sect;
+
+      /* If we didn't find a mapped non zero sized .text section, set up
+	 text_addr so that the relocation in symbol_file_add does no harm.  */
+
+      lowest_sect = bfd_get_section_by_name (so -> abfd, ".text");
+      if (lowest_sect == NULL)
+	bfd_map_over_sections (so -> abfd, find_lowest_section,
+			       (PTR) &lowest_sect);
+      if (lowest_sect)
+	text_addr = bfd_section_vma (so -> abfd, lowest_sect) + LM_OFFSET (so);
+    }
+  
+  so -> objfile = symbol_file_add (so -> so_name, so -> from_tty,
+				   text_addr,
+				   0, 0, 0, 0, 1);
+  return (1);
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_add -- add a shared library file to the symtab and section list
+
+SYNOPSIS
+
+	void solib_add (char *arg_string, int from_tty,
+			struct target_ops *target)
+
+DESCRIPTION
+
+*/
+
+void
+solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{	
+  register struct so_list *so = NULL;   	/* link map state variable */
+
+  /* Last shared library that we read.  */
+  struct so_list *so_last = NULL;
+
+  char *re_err;
+  int count;
+  int old;
+  
+  if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
+    {
+      error ("Invalid regexp: %s", re_err);
+    }
+  
+  
+  /* Add the shared library sections to the section table of the
+     specified target, if any.  */
+  if (target)
+    {
+      /* Count how many new section_table entries there are.  */
+      so = NULL;
+      count = 0;
+      while ((so = find_solib (so)) != NULL)
+	{
+	  if (so -> so_name[0])
+	    {
+	      count += so -> sections_end - so -> sections;
+	    }
+	}
+      
+      if (count)
+	{
+	  int update_coreops;
+
+	  /* We must update the to_sections field in the core_ops structure
+	     here, otherwise we dereference a potential dangling pointer
+	     for each call to target_read/write_memory within this routine.  */
+	  update_coreops = core_ops.to_sections == target->to_sections;
+	     
+	  /* Reallocate the target's section table including the new size.  */
+	  if (target -> to_sections)
+	    {
+	      old = target -> to_sections_end - target -> to_sections;
+	      target -> to_sections = (struct section_table *)
+		xrealloc ((char *)target -> to_sections,
+			 (sizeof (struct section_table)) * (count + old));
+	    }
+	  else
+	    {
+	      old = 0;
+	      target -> to_sections = (struct section_table *)
+		xmalloc ((sizeof (struct section_table)) * count);
+	    }
+	  target -> to_sections_end = target -> to_sections + (count + old);
+	  
+	  /* Update the to_sections field in the core_ops structure
+	     if needed.  */
+	  if (update_coreops)
+	    {
+	      core_ops.to_sections = target->to_sections;
+	      core_ops.to_sections_end = target->to_sections_end;
+	    }
+
+	  /* Add these section table entries to the target's table.  */
+	  while ((so = find_solib (so)) != NULL)
+	    {
+	      if (so -> so_name[0])
+		{
+		  count = so -> sections_end - so -> sections;
+		  memcpy ((char *) (target -> to_sections + old),
+			  so -> sections, 
+			  (sizeof (struct section_table)) * count);
+		  old += count;
+		}
+	    }
+	}
+    }
+  
+  /* Now add the symbol files.  */
+  so = NULL;
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0] && re_exec (so -> so_name))
+	{
+	  so -> from_tty = from_tty;
+	  if (so -> symbols_loaded)
+	    {
+	      if (from_tty)
+		{
+		  printf_unfiltered ("Symbols already loaded for %s\n", so -> so_name);
+		}
+	    }
+	  else if (catch_errors
+		   (symbol_add_stub, (char *) so,
+		    "Error while reading shared library symbols:\n",
+		    RETURN_MASK_ALL))
+	    {
+	      so_last = so;
+	      so -> symbols_loaded = 1;
+	    }
+	}
+    }
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  if (so_last)
+    reinit_frame_cache ();
+}
+
+/*
+
+LOCAL FUNCTION
+
+	info_sharedlibrary_command -- code for "info sharedlibrary"
+
+SYNOPSIS
+
+	static void info_sharedlibrary_command ()
+
+DESCRIPTION
+
+	Walk through the shared library list and print information
+	about each attached library.
+*/
+
+static void
+info_sharedlibrary_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct so_list *so = NULL;  	/* link map state variable */
+  int header_done = 0;
+  
+  if (exec_bfd == NULL)
+    {
+      printf_unfiltered ("No exec file.\n");
+      return;
+    }
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0])
+	{
+	  unsigned long txt_start = 0;
+	  unsigned long txt_end = 0;
+
+	  if (!header_done)
+	    {
+	      printf_unfiltered("%-20s%-20s%-12s%s\n", "From", "To", "Syms Read",
+		     "Shared Object Library");
+	      header_done++;
+	    }
+	  if (so -> textsection)
+	    {
+	      txt_start = (unsigned long) so -> textsection -> addr;
+	      txt_end = (unsigned long) so -> textsection -> endaddr;
+	    }
+	  printf_unfiltered ("%-20s", local_hex_string_custom (txt_start, "08l"));
+	  printf_unfiltered ("%-20s", local_hex_string_custom (txt_end, "08l"));
+	  printf_unfiltered ("%-12s", so -> symbols_loaded ? "Yes" : "No");
+	  printf_unfiltered ("%s\n",  so -> so_name);
+	}
+    }
+  if (so_list_head == NULL)
+    {
+      printf_unfiltered ("No shared libraries loaded at this time.\n");	
+    }
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_address -- check to see if an address is in a shared lib
+
+SYNOPSIS
+
+	char *solib_address (CORE_ADDR address)
+
+DESCRIPTION
+
+	Provides a hook for other gdb routines to discover whether or
+	not a particular address is within the mapped address space of
+	a shared library.  Any address between the base mapping address
+	and the first address beyond the end of the last mapping, is
+	considered to be within the shared library address space, for
+	our purposes.
+
+	For example, this routine is called at one point to disable
+	breakpoints which are in shared libraries that are not currently
+	mapped in.
+ */
+
+char *
+solib_address (address)
+     CORE_ADDR address;
+{
+  register struct so_list *so = 0;   	/* link map state variable */
+  
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0] && so -> textsection)
+	{
+	  if ((address >= (CORE_ADDR) so -> textsection -> addr) &&
+	      (address < (CORE_ADDR) so -> textsection -> endaddr))
+	    return (so->so_name);
+	}
+    }
+  return (0);
+}
+
+/* Called by free_all_symtabs */
+
+void 
+clear_solib()
+{
+  struct so_list *next;
+  char *bfd_filename;
+  
+  disable_breakpoints_in_shlibs (1);
+
+  while (so_list_head)
+    {
+      if (so_list_head -> sections)
+	{
+	  free ((PTR)so_list_head -> sections);
+	}
+      if (so_list_head -> abfd)
+	{
+	  bfd_filename = bfd_get_filename (so_list_head -> abfd);
+	  if (!bfd_close (so_list_head -> abfd))
+	    warning ("cannot close \"%s\": %s",
+		     bfd_filename, bfd_errmsg (bfd_get_error ()));
+	}
+      else
+	/* This happens for the executable on SVR4.  */
+	bfd_filename = NULL;
+
+      next = so_list_head -> next;
+      if (bfd_filename)
+	free ((PTR)bfd_filename);
+      free ((PTR)so_list_head);
+      so_list_head = next;
+    }
+}
+  
+/*
+  
+GLOBAL FUNCTION
+  
+	solib_create_inferior_hook -- shared library startup support
+  
+SYNOPSIS
+  
+	void solib_create_inferior_hook()
+  
+DESCRIPTION
+
+	When gdb starts up the inferior, it nurses it along (through the
+	shell) until it is ready to execute it's first instruction.  At this
+	point, this function gets called via expansion of the macro
+	SOLIB_CREATE_INFERIOR_HOOK.
+	For a statically bound executable, this first instruction is the
+	one at "_start", or a similar text label. No further processing is
+	needed in that case.
+	For a dynamically bound executable, this first instruction is somewhere
+	in the rld, and the actual user executable is not yet mapped in.
+	We continue the inferior again, rld then maps in the actual user
+	executable and any needed shared libraries and then sends
+	itself a SIGTRAP.
+	At that point we discover the names of all shared libraries and
+	read their symbols in.
+
+FIXME
+
+	This code does not properly handle hitting breakpoints which the
+	user might have set in the rld itself.  Proper handling would have
+	to check if the SIGTRAP happened due to a kill call.
+
+	Also, what if child has exit()ed?  Must exit loop somehow.
+  */
+
+void
+solib_create_inferior_hook()
+{
+
+  /* Nothing to do for statically bound executables.  */
+
+  if (symfile_objfile == NULL
+      || symfile_objfile->obfd == NULL
+      || ((bfd_get_file_flags (symfile_objfile->obfd) & DYNAMIC) == 0))
+    return;
+
+  /* Now run the target.  It will eventually get a SIGTRAP, at
+     which point all of the libraries will have been mapped in and we
+     can go groveling around in the rld structures to find
+     out what we need to know about them. */
+ 
+  clear_proceed_status ();
+  stop_soon_quietly = 1;
+  stop_signal = TARGET_SIGNAL_0;
+  do
+    {
+      target_resume (-1, 0, stop_signal);
+      wait_for_inferior ();
+    }
+  while (stop_signal != TARGET_SIGNAL_TRAP);
+
+  /*  solib_add will call reinit_frame_cache.
+      But we are stopped in the runtime loader and we do not have symbols
+      for the runtime loader. So heuristic_proc_start will be called
+      and will put out an annoying warning.
+      Delaying the resetting of stop_soon_quietly until after symbol loading
+      suppresses the warning.  */
+  if (auto_solib_add)
+    solib_add ((char *) 0, 0, (struct target_ops *) 0);
+  stop_soon_quietly = 0;
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	sharedlibrary_command -- handle command to explicitly add library
+
+SYNOPSIS
+
+	static void sharedlibrary_command (char *args, int from_tty)
+
+DESCRIPTION
+
+*/
+
+static void
+sharedlibrary_command (args, from_tty)
+char *args;
+int from_tty;
+{
+  dont_repeat ();
+  solib_add (args, from_tty, (struct target_ops *) 0);
+}
+
+void
+_initialize_solib()
+{
+  add_com ("sharedlibrary", class_files, sharedlibrary_command,
+	   "Load shared object library symbols for files matching REGEXP.");
+  add_info ("sharedlibrary", info_sharedlibrary_command, 
+	    "Status of loaded shared object libraries.");
+
+  add_show_from_set
+    (add_set_cmd ("auto-solib-add", class_support, var_zinteger,
+		  (char *) &auto_solib_add,
+		  "Set autoloading of shared library symbols.\n\
+If nonzero, symbols from all shared object libraries will be loaded\n\
+automatically when the inferior begins execution or when the dynamic linker\n\
+informs gdb that a new library has been loaded.  Otherwise, symbols\n\
+must be loaded manually, using `sharedlibrary'.",
+		  &setlist),
+     &showlist);
+}
diff --git a/gdb/parse.c b/gdb/parse.c
new file mode 100644
index 0000000..af68fbf
--- /dev/null
+++ b/gdb/parse.c
@@ -0,0 +1,1351 @@
+/* Parse expressions for GDB.
+   Copyright (C) 1986, 89, 90, 91, 94, 1998 Free Software Foundation, Inc.
+   Modified from expread.y by the Department of Computer Science at the
+   State University of New York at Buffalo, 1991.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Parse an expression from text in a string,
+   and return the result as a  struct expression  pointer.
+   That structure contains arithmetic operations in reverse polish,
+   with constants represented by operations that are followed by special data.
+   See expression.h for the details of the format.
+   What is important here is that it can be built up sequentially
+   during the process of parsing; the lower levels of the tree always
+   come first in the result.  */
+   
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "frame.h"
+#include "expression.h"
+#include "value.h"
+#include "command.h"
+#include "language.h"
+#include "parser-defs.h"
+#include "gdbcmd.h"
+#include "symfile.h"	/* for overlay functions */
+
+/* Global variables declared in parser-defs.h (and commented there).  */
+struct expression *expout;
+int expout_size;
+int expout_ptr;
+struct block *expression_context_block;
+struct block *innermost_block;
+int arglist_len;
+union type_stack_elt *type_stack;
+int type_stack_depth, type_stack_size;
+char *lexptr;
+char *namecopy;
+int paren_depth;
+int comma_terminates;
+
+#ifdef MAINTENANCE_CMDS
+static int expressiondebug = 0;
+#endif
+
+extern int hp_som_som_object_present;
+
+static void
+free_funcalls PARAMS ((void));
+
+static void
+prefixify_expression PARAMS ((struct expression *));
+
+static void
+prefixify_subexp PARAMS ((struct expression *, struct expression *, int, int));
+
+/* Data structure for saving values of arglist_len for function calls whose
+   arguments contain other function calls.  */
+
+struct funcall
+  {
+    struct funcall *next;
+    int arglist_len;
+  };
+
+static struct funcall *funcall_chain;
+
+/* Assign machine-independent names to certain registers 
+   (unless overridden by the REGISTER_NAMES table) */
+
+#ifdef NO_STD_REGS
+unsigned num_std_regs = 0;
+struct std_regs std_regs[1];
+#else
+struct std_regs std_regs[] = {
+
+#ifdef PC_REGNUM
+	{ "pc", PC_REGNUM },
+#endif
+#ifdef FP_REGNUM
+	{ "fp", FP_REGNUM },
+#endif
+#ifdef SP_REGNUM
+	{ "sp", SP_REGNUM },
+#endif
+#ifdef PS_REGNUM
+	{ "ps", PS_REGNUM },
+#endif
+
+};
+
+unsigned num_std_regs = (sizeof std_regs / sizeof std_regs[0]);
+
+#endif
+
+/* The generic method for targets to specify how their registers are
+   named.  The mapping can be derived from three sources:
+   REGISTER_NAME; std_regs; or a target specific alias hook. */
+
+int
+target_map_name_to_register (str, len)
+     char *str;
+     int len;
+{
+  int i;
+
+  /* First try target specific aliases. We try these first because on some 
+     systems standard names can be context dependent (eg. $pc on a 
+     multiprocessor can be could be any of several PCs).  */
+#ifdef REGISTER_NAME_ALIAS_HOOK
+  i =  REGISTER_NAME_ALIAS_HOOK (str, len);
+  if (i >= 0)
+    return i;
+#endif
+
+  /* Search architectural register name space. */
+  for (i = 0; i < NUM_REGS; i++)
+    if (REGISTER_NAME (i) && len == strlen (REGISTER_NAME (i))
+	&& STREQN (str, REGISTER_NAME (i), len))
+      {
+	return i;
+      }
+
+  /* Try standard aliases */
+  for (i = 0; i < num_std_regs; i++)
+    if (std_regs[i].name && len == strlen (std_regs[i].name)
+	&& STREQN (str, std_regs[i].name, len))
+      {
+	return std_regs[i].regnum;
+      }
+
+  return -1;
+}
+
+/* Begin counting arguments for a function call,
+   saving the data about any containing call.  */
+
+void
+start_arglist ()
+{
+  register struct funcall *new;
+
+  new = (struct funcall *) xmalloc (sizeof (struct funcall));
+  new->next = funcall_chain;
+  new->arglist_len = arglist_len;
+  arglist_len = 0;
+  funcall_chain = new;
+}
+
+/* Return the number of arguments in a function call just terminated,
+   and restore the data for the containing function call.  */
+
+int
+end_arglist ()
+{
+  register int val = arglist_len;
+  register struct funcall *call = funcall_chain;
+  funcall_chain = call->next;
+  arglist_len = call->arglist_len;
+  free ((PTR)call);
+  return val;
+}
+
+/* Free everything in the funcall chain.
+   Used when there is an error inside parsing.  */
+
+static void
+free_funcalls ()
+{
+  register struct funcall *call, *next;
+
+  for (call = funcall_chain; call; call = next)
+    {
+      next = call->next;
+      free ((PTR)call);
+    }
+}
+
+/* This page contains the functions for adding data to the  struct expression
+   being constructed.  */
+
+/* Add one element to the end of the expression.  */
+
+/* To avoid a bug in the Sun 4 compiler, we pass things that can fit into
+   a register through here */
+
+void
+write_exp_elt (expelt)
+     union exp_element expelt;
+{
+  if (expout_ptr >= expout_size)
+    {
+      expout_size *= 2;
+      expout = (struct expression *)
+	xrealloc ((char *) expout, sizeof (struct expression)
+		  + EXP_ELEM_TO_BYTES (expout_size));
+    }
+  expout->elts[expout_ptr++] = expelt;
+}
+
+void
+write_exp_elt_opcode (expelt)
+     enum exp_opcode expelt;
+{
+  union exp_element tmp;
+
+  tmp.opcode = expelt;
+
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_sym (expelt)
+     struct symbol *expelt;
+{
+  union exp_element tmp;
+
+  tmp.symbol = expelt;
+
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_block (b)
+     struct block *b;
+{
+  union exp_element tmp;
+  tmp.block = b;
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_longcst (expelt)
+     LONGEST expelt;
+{
+  union exp_element tmp;
+
+  tmp.longconst = expelt;
+
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_dblcst (expelt)
+     DOUBLEST expelt;
+{
+  union exp_element tmp;
+
+  tmp.doubleconst = expelt;
+
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_type (expelt)
+     struct type *expelt;
+{
+  union exp_element tmp;
+
+  tmp.type = expelt;
+
+  write_exp_elt (tmp);
+}
+
+void
+write_exp_elt_intern (expelt)
+     struct internalvar *expelt;
+{
+  union exp_element tmp;
+
+  tmp.internalvar = expelt;
+
+  write_exp_elt (tmp);
+}
+
+/* Add a string constant to the end of the expression.
+
+   String constants are stored by first writing an expression element
+   that contains the length of the string, then stuffing the string
+   constant itself into however many expression elements are needed
+   to hold it, and then writing another expression element that contains
+   the length of the string.  I.E. an expression element at each end of
+   the string records the string length, so you can skip over the 
+   expression elements containing the actual string bytes from either
+   end of the string.  Note that this also allows gdb to handle
+   strings with embedded null bytes, as is required for some languages.
+
+   Don't be fooled by the fact that the string is null byte terminated,
+   this is strictly for the convenience of debugging gdb itself.  Gdb
+   Gdb does not depend up the string being null terminated, since the
+   actual length is recorded in expression elements at each end of the
+   string.  The null byte is taken into consideration when computing how
+   many expression elements are required to hold the string constant, of
+   course. */
+
+
+void
+write_exp_string (str)
+     struct stoken str;
+{
+  register int len = str.length;
+  register int lenelt;
+  register char *strdata;
+
+  /* Compute the number of expression elements required to hold the string
+     (including a null byte terminator), along with one expression element
+     at each end to record the actual string length (not including the
+     null byte terminator). */
+
+  lenelt = 2 + BYTES_TO_EXP_ELEM (len + 1);
+
+  /* Ensure that we have enough available expression elements to store
+     everything. */
+
+  if ((expout_ptr + lenelt) >= expout_size)
+    {
+      expout_size = max (expout_size * 2, expout_ptr + lenelt + 10);
+      expout = (struct expression *)
+	xrealloc ((char *) expout, (sizeof (struct expression)
+				    + EXP_ELEM_TO_BYTES (expout_size)));
+    }
+
+  /* Write the leading length expression element (which advances the current
+     expression element index), then write the string constant followed by a
+     terminating null byte, and then write the trailing length expression
+     element. */
+
+  write_exp_elt_longcst ((LONGEST) len);
+  strdata = (char *) &expout->elts[expout_ptr];
+  memcpy (strdata, str.ptr, len);
+  *(strdata + len) = '\0';
+  expout_ptr += lenelt - 2;
+  write_exp_elt_longcst ((LONGEST) len);
+}
+
+/* Add a bitstring constant to the end of the expression.
+
+   Bitstring constants are stored by first writing an expression element
+   that contains the length of the bitstring (in bits), then stuffing the
+   bitstring constant itself into however many expression elements are
+   needed to hold it, and then writing another expression element that
+   contains the length of the bitstring.  I.E. an expression element at
+   each end of the bitstring records the bitstring length, so you can skip
+   over the expression elements containing the actual bitstring bytes from
+   either end of the bitstring. */
+
+void
+write_exp_bitstring (str)
+     struct stoken str;
+{
+  register int bits = str.length;	/* length in bits */
+  register int len = (bits + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT;
+  register int lenelt;
+  register char *strdata;
+
+  /* Compute the number of expression elements required to hold the bitstring,
+     along with one expression element at each end to record the actual
+     bitstring length in bits. */
+
+  lenelt = 2 + BYTES_TO_EXP_ELEM (len);
+
+  /* Ensure that we have enough available expression elements to store
+     everything. */
+
+  if ((expout_ptr + lenelt) >= expout_size)
+    {
+      expout_size = max (expout_size * 2, expout_ptr + lenelt + 10);
+      expout = (struct expression *)
+	xrealloc ((char *) expout, (sizeof (struct expression)
+				    + EXP_ELEM_TO_BYTES (expout_size)));
+    }
+
+  /* Write the leading length expression element (which advances the current
+     expression element index), then write the bitstring constant, and then
+     write the trailing length expression element. */
+
+  write_exp_elt_longcst ((LONGEST) bits);
+  strdata = (char *) &expout->elts[expout_ptr];
+  memcpy (strdata, str.ptr, len);
+  expout_ptr += lenelt - 2;
+  write_exp_elt_longcst ((LONGEST) bits);
+}
+
+/* Add the appropriate elements for a minimal symbol to the end of
+   the expression.  The rationale behind passing in text_symbol_type and
+   data_symbol_type was so that Modula-2 could pass in WORD for
+   data_symbol_type.  Perhaps it still is useful to have those types vary
+   based on the language, but they no longer have names like "int", so
+   the initial rationale is gone.  */
+
+static struct type *msym_text_symbol_type;
+static struct type *msym_data_symbol_type;
+static struct type *msym_unknown_symbol_type;
+
+void
+write_exp_msymbol (msymbol, text_symbol_type, data_symbol_type)
+     struct minimal_symbol *msymbol;
+     struct type *text_symbol_type;
+     struct type *data_symbol_type;
+{
+  CORE_ADDR addr;
+
+  write_exp_elt_opcode (OP_LONG);
+  write_exp_elt_type (lookup_pointer_type (builtin_type_void));
+
+  addr = SYMBOL_VALUE_ADDRESS (msymbol);
+  if (overlay_debugging)
+    addr = symbol_overlayed_address (addr, SYMBOL_BFD_SECTION (msymbol));
+  write_exp_elt_longcst ((LONGEST) addr);
+						
+  write_exp_elt_opcode (OP_LONG);
+
+  write_exp_elt_opcode (UNOP_MEMVAL);
+  switch (msymbol -> type)
+    {
+    case mst_text:
+    case mst_file_text:
+    case mst_solib_trampoline:
+      write_exp_elt_type (msym_text_symbol_type);
+      break;
+
+    case mst_data:
+    case mst_file_data:
+    case mst_bss:
+    case mst_file_bss:
+      write_exp_elt_type (msym_data_symbol_type);
+      break;
+
+    default:
+      write_exp_elt_type (msym_unknown_symbol_type);
+      break;
+    }
+  write_exp_elt_opcode (UNOP_MEMVAL);
+}
+
+/* Recognize tokens that start with '$'.  These include:
+
+	$regname	A native register name or a "standard
+			register name".
+
+	$variable	A convenience variable with a name chosen
+			by the user.
+
+	$digits		Value history with index <digits>, starting
+			from the first value which has index 1.
+
+	$$digits	Value history with index <digits> relative
+			to the last value.  I.E. $$0 is the last
+			value, $$1 is the one previous to that, $$2
+			is the one previous to $$1, etc.
+
+	$ | $0 | $$0	The last value in the value history.
+
+	$$		An abbreviation for the second to the last
+			value in the value history, I.E. $$1
+
+   */
+
+void
+write_dollar_variable (str)
+     struct stoken str;
+{
+  /* Handle the tokens $digits; also $ (short for $0) and $$ (short for $$1)
+     and $$digits (equivalent to $<-digits> if you could type that). */
+
+  struct symbol * sym = NULL;
+  struct minimal_symbol * msym = NULL;
+
+  int negate = 0;
+  int i = 1;
+  /* Double dollar means negate the number and add -1 as well.
+     Thus $$ alone means -1.  */
+  if (str.length >= 2 && str.ptr[1] == '$')
+    {
+      negate = 1;
+      i = 2;
+    }
+  if (i == str.length)
+    {
+      /* Just dollars (one or two) */
+      i = - negate;
+      goto handle_last;
+    }
+  /* Is the rest of the token digits?  */
+  for (; i < str.length; i++)
+    if (!(str.ptr[i] >= '0' && str.ptr[i] <= '9'))
+      break;
+  if (i == str.length)
+    {
+      i = atoi (str.ptr + 1 + negate);
+      if (negate)
+	i = - i;
+      goto handle_last;
+    }
+  
+  /* Handle tokens that refer to machine registers:
+     $ followed by a register name.  */
+  i = target_map_name_to_register( str.ptr + 1, str.length - 1 );
+  if( i >= 0 )
+    goto handle_register;
+
+  /* On HP-UX, certain system routines (millicode) have names beginning
+     with $ or $$, e.g. $$dyncall, which handles inter-space procedure
+     calls on PA-RISC. Check for those, first. */
+
+  sym = lookup_symbol (copy_name (str), (struct block *) NULL,
+                       VAR_NAMESPACE, (int *) NULL, (struct symtab **) NULL);
+  if (sym)
+    {
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      write_exp_elt_block (block_found); /* set by lookup_symbol */
+      write_exp_elt_sym (sym);
+      write_exp_elt_opcode (OP_VAR_VALUE);
+      return;
+    }
+  msym = lookup_minimal_symbol (copy_name (str), NULL, NULL);
+  if (msym)
+    {
+      write_exp_msymbol (msym,
+                         lookup_function_type (builtin_type_int),
+                         builtin_type_int);
+      return;
+    }
+  
+  /* Any other names starting in $ are debugger internal variables.  */
+
+  write_exp_elt_opcode (OP_INTERNALVAR);
+  write_exp_elt_intern (lookup_internalvar (copy_name (str) + 1));
+  write_exp_elt_opcode (OP_INTERNALVAR); 
+  return;
+ handle_last:
+  write_exp_elt_opcode (OP_LAST);
+  write_exp_elt_longcst ((LONGEST) i);
+  write_exp_elt_opcode (OP_LAST);
+  return;
+ handle_register:
+  write_exp_elt_opcode (OP_REGISTER);
+  write_exp_elt_longcst (i);
+  write_exp_elt_opcode (OP_REGISTER); 
+  return;
+}
+
+
+/* Parse a string that is possibly a namespace / nested class
+   specification, i.e., something of the form A::B::C::x.  Input
+   (NAME) is the entire string; LEN is the current valid length; the
+   output is a string, TOKEN, which points to the largest recognized
+   prefix which is a series of namespaces or classes.  CLASS_PREFIX is
+   another output, which records whether a nested class spec was
+   recognized (= 1) or a fully qualified variable name was found (=
+   0).  ARGPTR is side-effected (if non-NULL) to point to beyond the
+   string recognized and consumed by this routine.
+
+   The return value is a pointer to the symbol for the base class or
+   variable if found, or NULL if not found.  Callers must check this
+   first -- if NULL, the outputs may not be correct. 
+
+   This function is used c-exp.y.  This is used specifically to get
+   around HP aCC (and possibly other compilers), which insists on
+   generating names with embedded colons for namespace or nested class
+   members.
+
+   (Argument LEN is currently unused. 1997-08-27)
+
+   Callers must free memory allocated for the output string TOKEN.  */
+
+static const char coloncolon[2] = {':',':'};
+
+struct symbol *
+parse_nested_classes_for_hpacc (name, len, token, class_prefix, argptr)
+  char * name;
+  int len;
+  char ** token;
+  int * class_prefix;
+  char ** argptr;
+{
+   /* Comment below comes from decode_line_1 which has very similar
+      code, which is called for "break" command parsing. */
+  
+   /* We have what looks like a class or namespace
+     scope specification (A::B), possibly with many
+     levels of namespaces or classes (A::B::C::D).
+
+     Some versions of the HP ANSI C++ compiler (as also possibly
+     other compilers) generate class/function/member names with
+     embedded double-colons if they are inside namespaces. To
+     handle this, we loop a few times, considering larger and
+     larger prefixes of the string as though they were single
+     symbols.  So, if the initially supplied string is
+     A::B::C::D::foo, we have to look up "A", then "A::B",
+     then "A::B::C", then "A::B::C::D", and finally
+     "A::B::C::D::foo" as single, monolithic symbols, because
+     A, B, C or D may be namespaces.
+
+     Note that namespaces can nest only inside other
+     namespaces, and not inside classes.  So we need only
+     consider *prefixes* of the string; there is no need to look up
+     "B::C" separately as a symbol in the previous example. */
+
+  register char * p;
+  char * start, * end;
+  char * prefix = NULL;
+  char * tmp;
+  struct symbol * sym_class = NULL;
+  struct symbol * sym_var = NULL;
+  struct type * t;
+  register int i;
+  int colons_found = 0;
+  int prefix_len = 0;
+  int done = 0;
+  char * q; 
+
+  /* Check for HP-compiled executable -- in other cases
+     return NULL, and caller must default to standard GDB
+     behaviour. */
+
+  if (!hp_som_som_object_present)
+    return (struct symbol *) NULL;
+
+  p = name;
+
+  /* Skip over whitespace and possible global "::" */ 
+  while (*p && (*p == ' ' || *p == '\t')) p++;
+  if (p[0] == ':' && p[1] == ':')
+    p += 2;
+  while (*p && (*p == ' ' || *p == '\t')) p++;
+  
+  while (1)
+    {
+      /* Get to the end of the next namespace or class spec. */
+      /* If we're looking at some non-token, fail immediately */
+      start = p;
+      if (!(isalpha (*p) || *p == '$' || *p == '_'))
+        return (struct symbol *) NULL;
+      p++;
+      while (*p && (isalnum (*p) || *p == '$' || *p == '_')) p++;
+
+      if (*p == '<') 
+        {
+          /* If we have the start of a template specification,
+             scan right ahead to its end */ 
+          q = find_template_name_end (p);
+          if (q)
+            p = q;
+        }
+        
+      end = p;
+
+      /* Skip over "::" and whitespace for next time around */ 
+      while (*p && (*p == ' ' || *p == '\t')) p++;
+      if (p[0] == ':' && p[1] == ':')
+        p += 2;
+      while (*p && (*p == ' ' || *p == '\t')) p++;
+
+      /* Done with tokens? */ 
+      if (!*p || !(isalpha (*p) || *p == '$' || *p == '_'))
+        done = 1;
+
+      tmp = (char *) alloca (prefix_len + end - start + 3);
+      if (prefix)
+        {
+          memcpy (tmp, prefix, prefix_len);
+          memcpy (tmp + prefix_len, coloncolon, 2);
+          memcpy (tmp + prefix_len + 2, start, end - start);
+          tmp[prefix_len + 2 + end - start] = '\000';
+        }
+      else
+        {
+          memcpy (tmp, start, end - start);
+          tmp[end - start] = '\000';
+        }
+      
+      prefix = tmp;
+      prefix_len = strlen (prefix);
+      
+#if 0 /* DEBUGGING */ 
+      printf ("Searching for nested class spec: Prefix is %s\n", prefix);
+#endif      
+
+      /* See if the prefix we have now is something we know about */
+
+      if (!done) 
+        {
+          /* More tokens to process, so this must be a class/namespace */
+          sym_class = lookup_symbol (prefix, 0, STRUCT_NAMESPACE,
+                                     0, (struct symtab **) NULL);
+        }
+      else
+        {
+          /* No more tokens, so try as a variable first */ 
+          sym_var = lookup_symbol (prefix, 0, VAR_NAMESPACE,
+                               0, (struct symtab **) NULL);
+          /* If failed, try as class/namespace */ 
+          if (!sym_var)
+            sym_class = lookup_symbol (prefix, 0, STRUCT_NAMESPACE,
+                                       0, (struct symtab **) NULL);
+        }
+
+      if (sym_var ||
+          (sym_class &&
+           (t = check_typedef (SYMBOL_TYPE (sym_class)),
+            (TYPE_CODE (t) == TYPE_CODE_STRUCT
+             || TYPE_CODE (t) == TYPE_CODE_UNION))))
+        {
+          /* We found a valid token */
+          *token = (char *) xmalloc (prefix_len + 1 );
+          memcpy (*token, prefix, prefix_len);
+          (*token)[prefix_len] = '\000';
+          break;
+        }
+
+      /* No variable or class/namespace found, no more tokens */ 
+      if (done)
+        return (struct symbol *) NULL;
+    }
+
+  /* Out of loop, so we must have found a valid token */
+  if (sym_var)
+    *class_prefix = 0;
+  else
+    *class_prefix = 1;
+
+  if (argptr)
+    *argptr = done ? p : end;
+
+#if 0 /* DEBUGGING */ 
+  printf ("Searching for nested class spec: Token is %s, class_prefix %d\n", *token, *class_prefix);
+#endif
+
+  return sym_var ? sym_var : sym_class; /* found */ 
+}
+
+char *
+find_template_name_end (p)
+  char * p;
+{
+  int depth = 1;
+  int just_seen_right = 0;
+  int just_seen_colon = 0;
+  int just_seen_space = 0;
+  
+  if (!p || (*p != '<'))
+    return 0;
+
+  while (*++p)
+    {
+      switch (*p)
+        {
+          case '\'': case '\"':
+          case '{': case '}':
+            /* In future, may want to allow these?? */ 
+            return 0;
+          case '<':
+            depth++;                /* start nested template */ 
+            if (just_seen_colon || just_seen_right || just_seen_space)    
+              return 0;             /* but not after : or :: or > or space */ 
+            break;
+          case '>': 
+            if (just_seen_colon || just_seen_right)
+              return 0;             /* end a (nested?) template */
+            just_seen_right = 1;    /* but not after : or :: */ 
+            if (--depth == 0)       /* also disallow >>, insist on > > */ 
+              return ++p;           /* if outermost ended, return */ 
+            break;
+          case ':':
+            if (just_seen_space || (just_seen_colon > 1))
+              return 0;             /* nested class spec coming up */ 
+            just_seen_colon++;      /* we allow :: but not :::: */ 
+            break;
+          case ' ':
+            break;
+          default:
+            if (!((*p >= 'a' && *p <= 'z') ||   /* allow token chars */ 
+                  (*p >= 'A' && *p <= 'Z') ||
+                  (*p >= '0' && *p <= '9') ||
+                  (*p == '_') || (*p == ',') || /* commas for template args */
+                  (*p == '&') || (*p == '*') || /* pointer and ref types */
+                  (*p == '(') || (*p == ')') || /* function types */ 
+                  (*p == '[') || (*p == ']') )) /* array types */  
+              return 0;
+        }
+      if (*p != ' ')
+        just_seen_space = 0;
+      if (*p != ':')
+        just_seen_colon = 0;
+      if (*p != '>')
+        just_seen_right = 0;
+    }
+  return 0;
+}
+
+
+
+/* Return a null-terminated temporary copy of the name
+   of a string token.  */
+
+char *
+copy_name (token)
+     struct stoken token;
+{
+  memcpy (namecopy, token.ptr, token.length);
+  namecopy[token.length] = 0;
+  return namecopy;
+}
+
+/* Reverse an expression from suffix form (in which it is constructed)
+   to prefix form (in which we can conveniently print or execute it).  */
+
+static void
+prefixify_expression (expr)
+     register struct expression *expr;
+{
+  register int len =
+    sizeof (struct expression) + EXP_ELEM_TO_BYTES (expr->nelts);
+  register struct expression *temp;
+  register int inpos = expr->nelts, outpos = 0;
+
+  temp = (struct expression *) alloca (len);
+
+  /* Copy the original expression into temp.  */
+  memcpy (temp, expr, len);
+
+  prefixify_subexp (temp, expr, inpos, outpos);
+}
+
+/* Return the number of exp_elements in the subexpression of EXPR
+   whose last exp_element is at index ENDPOS - 1 in EXPR.  */
+
+int
+length_of_subexp (expr, endpos)
+     register struct expression *expr;
+     register int endpos;
+{
+  register int oplen = 1;
+  register int args = 0;
+  register int i;
+
+  if (endpos < 1)
+    error ("?error in length_of_subexp");
+
+  i = (int) expr->elts[endpos - 1].opcode;
+
+  switch (i)
+    {
+      /* C++  */
+    case OP_SCOPE:
+      oplen = longest_to_int (expr->elts[endpos - 2].longconst);
+      oplen = 5 + BYTES_TO_EXP_ELEM (oplen + 1);
+      break;
+
+    case OP_LONG:
+    case OP_DOUBLE:
+    case OP_VAR_VALUE:
+      oplen = 4;
+      break;
+
+    case OP_TYPE:
+    case OP_BOOL:
+    case OP_LAST:
+    case OP_REGISTER:
+    case OP_INTERNALVAR:
+      oplen = 3;
+      break;
+
+    case OP_COMPLEX:
+      oplen = 1; 
+      args = 2;
+      break; 
+
+    case OP_FUNCALL:
+    case OP_F77_UNDETERMINED_ARGLIST:
+      oplen = 3;
+      args = 1 + longest_to_int (expr->elts[endpos - 2].longconst);
+      break;
+
+    case UNOP_MAX:
+    case UNOP_MIN:
+      oplen = 3;
+      break;
+
+   case BINOP_VAL:
+   case UNOP_CAST:
+   case UNOP_MEMVAL:
+      oplen = 3;
+      args = 1;
+      break;
+
+    case UNOP_ABS:
+    case UNOP_CAP:
+    case UNOP_CHR:
+    case UNOP_FLOAT:
+    case UNOP_HIGH:
+    case UNOP_ODD:
+    case UNOP_ORD:
+    case UNOP_TRUNC:
+      oplen = 1;
+      args = 1;
+      break;
+
+    case OP_LABELED:
+    case STRUCTOP_STRUCT:
+    case STRUCTOP_PTR:
+      args = 1;
+      /* fall through */
+    case OP_M2_STRING:
+    case OP_STRING:
+    case OP_NAME:
+    case OP_EXPRSTRING:
+      oplen = longest_to_int (expr->elts[endpos - 2].longconst);
+      oplen = 4 + BYTES_TO_EXP_ELEM (oplen + 1);
+      break;
+
+    case OP_BITSTRING:
+      oplen = longest_to_int (expr->elts[endpos - 2].longconst);
+      oplen = (oplen + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT;
+      oplen = 4 + BYTES_TO_EXP_ELEM (oplen);
+      break;
+
+    case OP_ARRAY:
+      oplen = 4;
+      args = longest_to_int (expr->elts[endpos - 2].longconst);
+      args -= longest_to_int (expr->elts[endpos - 3].longconst);
+      args += 1;
+      break;
+
+    case TERNOP_COND:
+    case TERNOP_SLICE:
+    case TERNOP_SLICE_COUNT:
+      args = 3;
+      break;
+
+      /* Modula-2 */
+   case MULTI_SUBSCRIPT:
+      oplen = 3;
+      args = 1 + longest_to_int (expr->elts[endpos- 2].longconst);
+      break;
+
+    case BINOP_ASSIGN_MODIFY:
+      oplen = 3;
+      args = 2;
+      break;
+
+      /* C++ */
+    case OP_THIS:
+      oplen = 2;
+      break;
+
+    default:
+      args = 1 + (i < (int) BINOP_END);
+    }
+
+  while (args > 0)
+    {
+      oplen += length_of_subexp (expr, endpos - oplen);
+      args--;
+    }
+
+  return oplen;
+}
+
+/* Copy the subexpression ending just before index INEND in INEXPR
+   into OUTEXPR, starting at index OUTBEG.
+   In the process, convert it from suffix to prefix form.  */
+
+static void
+prefixify_subexp (inexpr, outexpr, inend, outbeg)
+     register struct expression *inexpr;
+     struct expression *outexpr;
+     register int inend;
+     int outbeg;
+{
+  register int oplen = 1;
+  register int args = 0;
+  register int i;
+  int *arglens;
+  enum exp_opcode opcode;
+
+  /* Compute how long the last operation is (in OPLEN),
+     and also how many preceding subexpressions serve as
+     arguments for it (in ARGS).  */
+
+  opcode = inexpr->elts[inend - 1].opcode;
+  switch (opcode)
+    {
+      /* C++  */
+    case OP_SCOPE:
+      oplen = longest_to_int (inexpr->elts[inend - 2].longconst);
+      oplen = 5 + BYTES_TO_EXP_ELEM (oplen + 1);
+      break;
+
+    case OP_LONG:
+    case OP_DOUBLE:
+    case OP_VAR_VALUE:
+      oplen = 4;
+      break;
+
+    case OP_TYPE:
+    case OP_BOOL:
+    case OP_LAST:
+    case OP_REGISTER:
+    case OP_INTERNALVAR:
+      oplen = 3;
+      break;
+
+    case OP_COMPLEX:
+      oplen = 1; 
+      args = 2; 
+      break; 
+
+    case OP_FUNCALL:
+    case OP_F77_UNDETERMINED_ARGLIST:
+      oplen = 3;
+      args = 1 + longest_to_int (inexpr->elts[inend - 2].longconst);
+      break;
+
+    case UNOP_MIN:
+    case UNOP_MAX:
+      oplen = 3;
+      break;
+
+    case UNOP_CAST:
+    case UNOP_MEMVAL:
+      oplen = 3;
+      args = 1;
+      break;
+
+    case UNOP_ABS:
+    case UNOP_CAP:
+    case UNOP_CHR:
+    case UNOP_FLOAT:
+    case UNOP_HIGH:
+    case UNOP_ODD:
+    case UNOP_ORD:
+    case UNOP_TRUNC:
+      oplen=1;
+      args=1;
+      break;
+
+    case STRUCTOP_STRUCT:
+    case STRUCTOP_PTR:
+    case OP_LABELED:
+      args = 1;
+      /* fall through */
+    case OP_M2_STRING:
+    case OP_STRING:
+    case OP_NAME:
+    case OP_EXPRSTRING:
+      oplen = longest_to_int (inexpr->elts[inend - 2].longconst);
+      oplen = 4 + BYTES_TO_EXP_ELEM (oplen + 1);
+      break;
+
+    case OP_BITSTRING:
+      oplen = longest_to_int (inexpr->elts[inend - 2].longconst);
+      oplen = (oplen + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT;
+      oplen = 4 + BYTES_TO_EXP_ELEM (oplen);
+      break;
+
+    case OP_ARRAY:
+      oplen = 4;
+      args = longest_to_int (inexpr->elts[inend - 2].longconst);
+      args -= longest_to_int (inexpr->elts[inend - 3].longconst);
+      args += 1;
+      break;
+
+    case TERNOP_COND:
+    case TERNOP_SLICE:
+    case TERNOP_SLICE_COUNT:
+      args = 3;
+      break;
+
+    case BINOP_ASSIGN_MODIFY:
+      oplen = 3;
+      args = 2;
+      break;
+
+      /* Modula-2 */
+   case MULTI_SUBSCRIPT:
+      oplen = 3;
+      args = 1 + longest_to_int (inexpr->elts[inend - 2].longconst);
+      break;
+
+      /* C++ */
+    case OP_THIS:
+      oplen = 2;
+      break;
+
+    default:
+      args = 1 + ((int) opcode < (int) BINOP_END);
+    }
+
+  /* Copy the final operator itself, from the end of the input
+     to the beginning of the output.  */
+  inend -= oplen;
+  memcpy (&outexpr->elts[outbeg], &inexpr->elts[inend],
+	  EXP_ELEM_TO_BYTES (oplen));
+  outbeg += oplen;
+
+  /* Find the lengths of the arg subexpressions.  */
+  arglens = (int *) alloca (args * sizeof (int));
+  for (i = args - 1; i >= 0; i--)
+    {
+      oplen = length_of_subexp (inexpr, inend);
+      arglens[i] = oplen;
+      inend -= oplen;
+    }
+
+  /* Now copy each subexpression, preserving the order of
+     the subexpressions, but prefixifying each one.
+     In this loop, inend starts at the beginning of
+     the expression this level is working on
+     and marches forward over the arguments.
+     outbeg does similarly in the output.  */
+  for (i = 0; i < args; i++)
+    {
+      oplen = arglens[i];
+      inend += oplen;
+      prefixify_subexp (inexpr, outexpr, inend, outbeg);
+      outbeg += oplen;
+    }
+}
+
+/* This page contains the two entry points to this file.  */
+
+/* Read an expression from the string *STRINGPTR points to,
+   parse it, and return a pointer to a  struct expression  that we malloc.
+   Use block BLOCK as the lexical context for variable names;
+   if BLOCK is zero, use the block of the selected stack frame.
+   Meanwhile, advance *STRINGPTR to point after the expression,
+   at the first nonwhite character that is not part of the expression
+   (possibly a null character).
+
+   If COMMA is nonzero, stop if a comma is reached.  */
+
+struct expression *
+parse_exp_1 (stringptr, block, comma)
+     char **stringptr;
+     struct block *block;
+     int comma;
+{
+  struct cleanup *old_chain;
+
+  lexptr = *stringptr;
+
+  paren_depth = 0;
+  type_stack_depth = 0;
+
+  comma_terminates = comma;
+
+  if (lexptr == 0 || *lexptr == 0)
+    error_no_arg ("expression to compute");
+
+  old_chain = make_cleanup ((make_cleanup_func) free_funcalls, 0);
+  funcall_chain = 0;
+
+  expression_context_block = block ? block : get_selected_block ();
+
+  namecopy = (char *) alloca (strlen (lexptr) + 1);
+  expout_size = 10;
+  expout_ptr = 0;
+  expout = (struct expression *)
+    xmalloc (sizeof (struct expression) + EXP_ELEM_TO_BYTES (expout_size));
+  expout->language_defn = current_language;
+  make_cleanup ((make_cleanup_func) free_current_contents, &expout);
+
+  if (current_language->la_parser ())
+    current_language->la_error (NULL);
+
+  discard_cleanups (old_chain);
+
+  /* Record the actual number of expression elements, and then
+     reallocate the expression memory so that we free up any
+     excess elements. */
+
+  expout->nelts = expout_ptr;
+  expout = (struct expression *)
+    xrealloc ((char *) expout,
+	      sizeof (struct expression) + EXP_ELEM_TO_BYTES (expout_ptr));;
+
+  /* Convert expression from postfix form as generated by yacc
+     parser, to a prefix form. */
+
+#ifdef MAINTENANCE_CMDS
+  if (expressiondebug)
+    dump_prefix_expression (expout, gdb_stdout,
+			    "before conversion to prefix form");
+#endif /* MAINTENANCE_CMDS */
+
+  prefixify_expression (expout);
+
+#ifdef MAINTENANCE_CMDS
+  if (expressiondebug)
+    dump_postfix_expression (expout, gdb_stdout,
+			     "after conversion to prefix form");
+#endif /* MAINTENANCE_CMDS */
+
+  *stringptr = lexptr;
+  return expout;
+}
+
+/* Parse STRING as an expression, and complain if this fails
+   to use up all of the contents of STRING.  */
+
+struct expression *
+parse_expression (string)
+     char *string;
+{
+  register struct expression *exp;
+  exp = parse_exp_1 (&string, 0, 0);
+  if (*string)
+    error ("Junk after end of expression.");
+  return exp;
+}
+
+/* Stuff for maintaining a stack of types.  Currently just used by C, but
+   probably useful for any language which declares its types "backwards".  */
+
+void 
+push_type (tp)
+     enum type_pieces tp;
+{
+  if (type_stack_depth == type_stack_size)
+    {
+      type_stack_size *= 2;
+      type_stack = (union type_stack_elt *)
+	xrealloc ((char *) type_stack, type_stack_size * sizeof (*type_stack));
+    }
+  type_stack[type_stack_depth++].piece = tp;
+}
+
+void
+push_type_int (n)
+     int n;
+{
+  if (type_stack_depth == type_stack_size)
+    {
+      type_stack_size *= 2;
+      type_stack = (union type_stack_elt *)
+	xrealloc ((char *) type_stack, type_stack_size * sizeof (*type_stack));
+    }
+  type_stack[type_stack_depth++].int_val = n;
+}
+
+enum type_pieces 
+pop_type ()
+{
+  if (type_stack_depth)
+    return type_stack[--type_stack_depth].piece;
+  return tp_end;
+}
+
+int
+pop_type_int ()
+{
+  if (type_stack_depth)
+    return type_stack[--type_stack_depth].int_val;
+  /* "Can't happen".  */
+  return 0;
+}
+
+/* Pop the type stack and return the type which corresponds to FOLLOW_TYPE
+   as modified by all the stuff on the stack.  */
+struct type *
+follow_types (follow_type)
+     struct type *follow_type;
+{
+  int done = 0;
+  int array_size;
+  struct type *range_type;
+
+  while (!done)
+    switch (pop_type ())
+      {
+      case tp_end:
+	done = 1;
+	break;
+      case tp_pointer:
+	follow_type = lookup_pointer_type (follow_type);
+	break;
+      case tp_reference:
+	follow_type = lookup_reference_type (follow_type);
+	break;
+      case tp_array:
+	array_size = pop_type_int ();
+	/* FIXME-type-allocation: need a way to free this type when we are
+	   done with it.  */
+	range_type =
+	  create_range_type ((struct type *) NULL,
+			     builtin_type_int, 0,
+			     array_size >= 0 ? array_size - 1 : 0);
+	follow_type =
+	  create_array_type ((struct type *) NULL,
+			     follow_type, range_type);
+	if (array_size < 0)
+	  TYPE_ARRAY_UPPER_BOUND_TYPE(follow_type)
+	    = BOUND_CANNOT_BE_DETERMINED;
+	break;
+      case tp_function:
+	/* FIXME-type-allocation: need a way to free this type when we are
+	   done with it.  */
+	follow_type = lookup_function_type (follow_type);
+	break;
+      }
+  return follow_type;
+}
+
+void
+_initialize_parse ()
+{
+  type_stack_size = 80;
+  type_stack_depth = 0;
+  type_stack = (union type_stack_elt *)
+    xmalloc (type_stack_size * sizeof (*type_stack));
+
+  msym_text_symbol_type =
+    init_type (TYPE_CODE_FUNC, 1, 0, "<text variable, no debug info>", NULL);
+  TYPE_TARGET_TYPE (msym_text_symbol_type) = builtin_type_int;
+  msym_data_symbol_type =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+	       "<data variable, no debug info>", NULL);
+  msym_unknown_symbol_type =
+    init_type (TYPE_CODE_INT, 1, 0,
+	       "<variable (not text or data), no debug info>",
+	       NULL);
+
+#ifdef MAINTENANCE_CMDS
+  add_show_from_set (
+     add_set_cmd ("expressiondebug", class_maintenance, var_zinteger,
+		  (char *)&expressiondebug,
+		 "Set expression debugging.\n\
+When non-zero, the internal representation of expressions will be printed.",
+		  &setlist),
+     &showlist);
+#endif
+}
diff --git a/gdb/parser-defs.h b/gdb/parser-defs.h
new file mode 100644
index 0000000..3226fdd
--- /dev/null
+++ b/gdb/parser-defs.h
@@ -0,0 +1,198 @@
+/* Parser definitions for GDB.
+   Copyright (C) 1986, 1989, 1990, 1991 Free Software Foundation, Inc.
+   Modified from expread.y by the Department of Computer Science at the
+   State University of New York at Buffalo.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (PARSER_DEFS_H)
+#define PARSER_DEFS_H 1
+
+struct std_regs {
+	char *name;
+	int regnum;
+};
+
+extern struct std_regs std_regs[];
+extern unsigned num_std_regs;
+
+extern struct expression *expout;
+extern int expout_size;
+extern int expout_ptr;
+
+/* If this is nonzero, this block is used as the lexical context
+   for symbol names.  */
+
+extern struct block *expression_context_block;
+
+/* The innermost context required by the stack and register variables
+   we've encountered so far. */
+extern struct block *innermost_block;
+
+/* The block in which the most recently discovered symbol was found.
+   FIXME: Should be declared along with lookup_symbol in symtab.h; is not
+   related specifically to parsing.  */
+extern struct block *block_found;
+
+/* Number of arguments seen so far in innermost function call.  */
+extern int arglist_len;
+
+/* A string token, either a char-string or bit-string.  Char-strings are
+   used, for example, for the names of symbols. */
+
+struct stoken
+  {
+    /* Pointer to first byte of char-string or first bit of bit-string */
+    char *ptr;
+    /* Length of string in bytes for char-string or bits for bit-string */
+    int length;
+  };
+
+struct ttype
+  {
+    struct stoken stoken;
+    struct type *type;
+  };
+
+struct symtoken
+  {
+    struct stoken stoken;
+    struct symbol *sym;
+    int is_a_field_of_this;
+  };
+
+/* For parsing of complicated types.
+   An array should be preceded in the list by the size of the array.  */
+enum type_pieces
+  {tp_end = -1, tp_pointer, tp_reference, tp_array, tp_function};
+/* The stack can contain either an enum type_pieces or an int.  */
+union type_stack_elt {
+  enum type_pieces piece;
+  int int_val;
+};
+extern union type_stack_elt *type_stack;
+extern int type_stack_depth, type_stack_size;
+
+extern void write_exp_elt PARAMS ((union exp_element));
+
+extern void write_exp_elt_opcode PARAMS ((enum exp_opcode));
+
+extern void write_exp_elt_sym PARAMS ((struct symbol *));
+
+extern void write_exp_elt_longcst PARAMS ((LONGEST));
+
+extern void write_exp_elt_dblcst PARAMS ((DOUBLEST));
+
+extern void write_exp_elt_type PARAMS ((struct type *));
+
+extern void write_exp_elt_intern PARAMS ((struct internalvar *));
+
+extern void write_exp_string PARAMS ((struct stoken));
+
+extern void write_exp_bitstring PARAMS ((struct stoken));
+
+extern void write_exp_elt_block PARAMS ((struct block *));
+
+extern void write_exp_msymbol PARAMS ((struct minimal_symbol *,
+				       struct type *, struct type *));
+
+extern void write_dollar_variable PARAMS ((struct stoken str));
+
+extern struct symbol * parse_nested_classes_for_hpacc PARAMS ((char *, int, char **, int *, char **));
+
+extern char * find_template_name_end PARAMS ((char *));
+
+extern void
+start_arglist PARAMS ((void));
+
+extern int
+end_arglist PARAMS ((void));
+
+extern char *
+copy_name PARAMS ((struct stoken));
+
+extern void 
+push_type PARAMS ((enum type_pieces));
+
+extern void
+push_type_int PARAMS ((int));
+
+extern enum type_pieces 
+pop_type PARAMS ((void));
+
+extern int
+pop_type_int PARAMS ((void));
+
+extern int
+length_of_subexp PARAMS ((struct expression *, int));
+
+extern struct type *follow_types PARAMS ((struct type *));
+
+/* During parsing of a C expression, the pointer to the next character
+   is in this variable.  */
+
+extern char *lexptr;
+
+/* Tokens that refer to names do so with explicit pointer and length,
+   so they can share the storage that lexptr is parsing.
+
+   When it is necessary to pass a name to a function that expects
+   a null-terminated string, the substring is copied out
+   into a block of storage that namecopy points to.
+
+   namecopy is allocated once, guaranteed big enough, for each parsing.  */
+
+extern char *namecopy;
+
+/* Current depth in parentheses within the expression.  */
+
+extern int paren_depth;
+
+/* Nonzero means stop parsing on first comma (if not within parentheses).  */
+
+extern int comma_terminates;
+
+/* These codes indicate operator precedences for expression printing,
+   least tightly binding first.  */
+/* Adding 1 to a precedence value is done for binary operators,
+   on the operand which is more tightly bound, so that operators
+   of equal precedence within that operand will get parentheses.  */
+/* PREC_HYPER and PREC_ABOVE_COMMA are not the precedence of any operator;
+   they are used as the "surrounding precedence" to force
+   various kinds of things to be parenthesized.  */
+enum precedence
+{ PREC_NULL, PREC_COMMA, PREC_ABOVE_COMMA, PREC_ASSIGN, PREC_LOGICAL_OR,
+  PREC_LOGICAL_AND, PREC_BITWISE_IOR, PREC_BITWISE_AND, PREC_BITWISE_XOR,
+  PREC_EQUAL, PREC_ORDER, PREC_SHIFT, PREC_ADD, PREC_MUL, PREC_REPEAT,
+  PREC_HYPER, PREC_PREFIX, PREC_SUFFIX, PREC_BUILTIN_FUNCTION };
+
+/* Table mapping opcodes into strings for printing operators
+   and precedences of the operators.  */
+
+struct op_print
+{
+  char *string;
+  enum exp_opcode opcode;
+  /* Precedence of operator.  These values are used only by comparisons.  */
+  enum precedence precedence;
+
+  /* For a binary operator:  1 iff right associate.
+     For a unary operator:  1 iff postfix. */
+  int right_assoc;
+};
+
+#endif	/* PARSER_DEFS_H */
diff --git a/gdb/partial-stab.h b/gdb/partial-stab.h
new file mode 100644
index 0000000..d74c1c9
--- /dev/null
+++ b/gdb/partial-stab.h
@@ -0,0 +1,812 @@
+/* Shared code to pre-read a stab (dbx-style), when building a psymtab.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The following need to be defined:
+   SET_NAMESTRING() --Set namestring to name of symbol.
+   CUR_SYMBOL_TYPE --Type code of current symbol.
+   CUR_SYMBOL_VALUE --Value field of current symbol.  May be adjusted here.
+   namestring - variable pointing to the name of the stab.
+   section_offsets - variable pointing to the section offsets.
+   pst - the partial symbol table being built.
+
+   psymtab_include_list, includes_used, includes_allocated - list of include
+     file names (N_SOL) seen so far.
+   dependency_list, dependencies_used, dependencies_allocated - list of
+     N_EXCL stabs seen so far.
+
+   END_PSYMTAB -- end a partial symbol table.
+   START_PSYMTAB -- start a partial symbol table.
+ */
+
+/* End of macro definitions, now let's handle them symbols!  */
+
+      switch (CUR_SYMBOL_TYPE)
+	{
+	  char *p;
+	  /*
+	   * Standard, external, non-debugger, symbols
+	   */
+
+	case N_TEXT | N_EXT:
+	case N_NBTEXT | N_EXT:
+	  CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	  goto record_it;
+
+	case N_DATA | N_EXT:
+	case N_NBDATA | N_EXT:
+	  CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	  goto record_it;
+
+	case N_BSS:
+	case N_BSS | N_EXT:
+	case N_NBBSS | N_EXT:
+        case N_SETV | N_EXT:		/* FIXME, is this in BSS? */
+	  CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_BSS);
+	  goto record_it;
+
+	case N_ABS | N_EXT:
+	record_it:
+#ifdef DBXREAD_ONLY
+	  SET_NAMESTRING();
+
+	bss_ext_symbol:
+	  record_minimal_symbol (namestring, CUR_SYMBOL_VALUE,
+				 CUR_SYMBOL_TYPE, objfile); /* Always */
+#endif /* DBXREAD_ONLY */
+	  continue;
+
+	  /* Standard, local, non-debugger, symbols */
+
+	case N_NBTEXT:
+
+	  /* We need to be able to deal with both N_FN or N_TEXT,
+	     because we have no way of knowing whether the sys-supplied ld
+	     or GNU ld was used to make the executable.  Sequents throw
+	     in another wrinkle -- they renumbered N_FN.  */
+
+	case N_FN:
+	case N_FN_SEQ:
+	case N_TEXT:
+#ifdef DBXREAD_ONLY
+	  CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+	  SET_NAMESTRING();
+	  if ((namestring[0] == '-' && namestring[1] == 'l')
+	      || (namestring [(nsl = strlen (namestring)) - 1] == 'o'
+		  && namestring [nsl - 2] == '.'))
+	    {
+	      if (objfile -> ei.entry_point <  CUR_SYMBOL_VALUE &&
+		  objfile -> ei.entry_point >= last_o_file_start)
+		{
+		  objfile -> ei.entry_file_lowpc = last_o_file_start;
+		  objfile -> ei.entry_file_highpc = CUR_SYMBOL_VALUE;
+		}
+	      if (past_first_source_file && pst
+		  /* The gould NP1 uses low values for .o and -l symbols
+		     which are not the address.  */
+		  && CUR_SYMBOL_VALUE >= pst->textlow)
+		{
+		  END_PSYMTAB (pst, psymtab_include_list, includes_used,
+			       symnum * symbol_size,
+			       CUR_SYMBOL_VALUE > pst->texthigh
+				 ? CUR_SYMBOL_VALUE : pst->texthigh, 
+			       dependency_list, dependencies_used, textlow_not_set);
+		  pst = (struct partial_symtab *) 0;
+		  includes_used = 0;
+		  dependencies_used = 0;
+		}
+	      else
+		past_first_source_file = 1;
+	      last_o_file_start = CUR_SYMBOL_VALUE;
+	    }
+	  else
+	    goto record_it;
+#endif /* DBXREAD_ONLY */
+	  continue;
+
+	case N_DATA:
+	  CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	  goto record_it;
+
+	case N_UNDF | N_EXT:
+#ifdef DBXREAD_ONLY
+	  if (CUR_SYMBOL_VALUE != 0) {
+	    /* This is a "Fortran COMMON" symbol.  See if the target
+	       environment knows where it has been relocated to.  */
+
+	    CORE_ADDR reladdr;
+
+	    SET_NAMESTRING();
+	    if (target_lookup_symbol (namestring, &reladdr)) {
+	      continue;		/* Error in lookup; ignore symbol for now.  */
+	    }
+	    CUR_SYMBOL_TYPE ^= (N_BSS^N_UNDF);	/* Define it as a bss-symbol */
+	    CUR_SYMBOL_VALUE = reladdr;
+	    goto bss_ext_symbol;
+	  }
+#endif /* DBXREAD_ONLY */
+	  continue;	/* Just undefined, not COMMON */
+
+	case N_UNDF:
+#ifdef DBXREAD_ONLY
+	  if (processing_acc_compilation && CUR_SYMBOL_STRX == 1) {
+	    /* Deal with relative offsets in the string table
+	       used in ELF+STAB under Solaris.  If we want to use the
+	       n_strx field, which contains the name of the file,
+	       we must adjust file_string_table_offset *before* calling
+	       SET_NAMESTRING().  */
+	    past_first_source_file = 1;
+	    file_string_table_offset = next_file_string_table_offset;
+	    next_file_string_table_offset =
+	      file_string_table_offset + CUR_SYMBOL_VALUE;
+	    if (next_file_string_table_offset < file_string_table_offset)
+	      error ("string table offset backs up at %d", symnum);
+  /* FIXME -- replace error() with complaint.  */
+	    continue;
+	  }
+#endif /* DBXREAD_ONLY */
+	  continue;
+
+	    /* Lots of symbol types we can just ignore.  */
+
+	case N_ABS:
+	case N_NBDATA:
+	case N_NBBSS:
+	  continue;
+
+	  /* Keep going . . .*/
+
+	  /*
+	   * Special symbol types for GNU
+	   */
+	case N_INDR:
+	case N_INDR | N_EXT:
+	case N_SETA:
+	case N_SETA | N_EXT:
+	case N_SETT:
+	case N_SETT | N_EXT:
+	case N_SETD:
+	case N_SETD | N_EXT:
+	case N_SETB:
+	case N_SETB | N_EXT:
+	case N_SETV:
+	  continue;
+
+	  /*
+	   * Debugger symbols
+	   */
+
+	case N_SO: {
+	  unsigned long valu;
+	  static int prev_so_symnum = -10;
+	  static int first_so_symnum;
+	  char *p;
+	  int prev_textlow_not_set;
+
+	  valu = CUR_SYMBOL_VALUE + ANOFFSET (section_offsets, SECT_OFF_TEXT);
+
+	  prev_textlow_not_set = textlow_not_set;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	  /* A zero value is probably an indication for the SunPRO 3.0
+	     compiler. end_psymtab explicitly tests for zero, so
+	     don't relocate it.  */
+
+	  if (CUR_SYMBOL_VALUE == 0)
+	    {
+	      textlow_not_set = 1;
+	      valu = 0;
+	    }
+	  else
+	    textlow_not_set = 0;
+#else
+	  textlow_not_set = 0;
+#endif
+	  past_first_source_file = 1;
+
+	  if (prev_so_symnum != symnum - 1)
+	    {			/* Here if prev stab wasn't N_SO */
+	      first_so_symnum = symnum;
+
+	      if (pst)
+		{
+		  END_PSYMTAB (pst, psymtab_include_list, includes_used,
+			       symnum * symbol_size,
+			       valu > pst->texthigh ? valu : pst->texthigh,
+			       dependency_list, dependencies_used,
+			       prev_textlow_not_set);
+		  pst = (struct partial_symtab *) 0;
+		  includes_used = 0;
+		  dependencies_used = 0;
+		}
+	    }
+
+	  prev_so_symnum = symnum;
+
+	  /* End the current partial symtab and start a new one */
+
+	  SET_NAMESTRING();
+
+	  /* Null name means end of .o file.  Don't start a new one. */
+	  if (*namestring == '\000')
+	    continue;
+
+	  /* Some compilers (including gcc) emit a pair of initial N_SOs.
+	     The first one is a directory name; the second the file name.
+	     If pst exists, is empty, and has a filename ending in '/',
+	     we assume the previous N_SO was a directory name. */
+
+	  p = strrchr (namestring, '/');
+	  if (p && *(p+1) == '\000')
+	    continue;		/* Simply ignore directory name SOs */
+
+	  /* Some other compilers (C++ ones in particular) emit useless
+	     SOs for non-existant .c files.  We ignore all subsequent SOs that
+	     immediately follow the first.  */
+
+	  if (!pst)
+	    pst = START_PSYMTAB (objfile, section_offsets,
+				 namestring, valu,
+				 first_so_symnum * symbol_size,
+				 objfile -> global_psymbols.next,
+				 objfile -> static_psymbols.next);
+	  continue;
+	}
+
+	case N_BINCL:
+	  {
+#ifdef DBXREAD_ONLY
+	    enum language tmp_language;
+	    /* Add this bincl to the bincl_list for future EXCLs.  No
+	       need to save the string; it'll be around until
+	       read_dbx_symtab function returns */
+
+	    SET_NAMESTRING();
+
+	    tmp_language = deduce_language_from_filename (namestring);
+
+	    /* Only change the psymtab's language if we've learned
+	       something useful (eg. tmp_language is not language_unknown).
+	       In addition, to match what start_subfile does, never change
+	       from C++ to C.  */
+	    if (tmp_language != language_unknown
+		&& (tmp_language != language_c
+		    || psymtab_language != language_cplus))
+	      psymtab_language = tmp_language;
+
+	    if (pst == NULL)
+	      {
+		/* FIXME: we should not get here without a PST to work on.
+		   Attempt to recover.  */
+		complain (&unclaimed_bincl_complaint, namestring, symnum);
+		continue;
+	      }
+	    add_bincl_to_list (pst, namestring, CUR_SYMBOL_VALUE);
+
+	    /* Mark down an include file in the current psymtab */
+
+	    goto record_include_file;
+
+#else /* DBXREAD_ONLY */
+	    continue;
+#endif
+	  }
+
+	case N_SOL:
+	  {
+	    enum language tmp_language;
+	    /* Mark down an include file in the current psymtab */
+	    
+	    SET_NAMESTRING();
+  
+	    tmp_language = deduce_language_from_filename (namestring);
+  
+	    /* Only change the psymtab's language if we've learned
+	       something useful (eg. tmp_language is not language_unknown).
+	       In addition, to match what start_subfile does, never change
+	       from C++ to C.  */
+	    if (tmp_language != language_unknown
+		&& (tmp_language != language_c
+		    || psymtab_language != language_cplus))
+	      psymtab_language = tmp_language;
+	    
+	    /* In C++, one may expect the same filename to come round many
+	       times, when code is coming alternately from the main file
+	       and from inline functions in other files. So I check to see
+	       if this is a file we've seen before -- either the main
+	       source file, or a previously included file.
+	       
+	       This seems to be a lot of time to be spending on N_SOL, but
+	       things like "break c-exp.y:435" need to work (I
+	       suppose the psymtab_include_list could be hashed or put
+	       in a binary tree, if profiling shows this is a major hog).  */
+	    if (pst && STREQ (namestring, pst->filename))
+	      continue;
+	    {
+	      register int i;
+	      for (i = 0; i < includes_used; i++)
+		if (STREQ (namestring, psymtab_include_list[i]))
+		  {
+		    i = -1; 
+		    break;
+		  }
+	      if (i == -1)
+		continue;
+	    }
+	    
+#ifdef DBXREAD_ONLY
+	  record_include_file:
+#endif
+	    
+	    psymtab_include_list[includes_used++] = namestring;
+	    if (includes_used >= includes_allocated)
+	      {
+		char **orig = psymtab_include_list;
+		
+		psymtab_include_list = (char **)
+		  alloca ((includes_allocated *= 2) *
+			  sizeof (char *));
+		memcpy ((PTR)psymtab_include_list, (PTR)orig,
+			includes_used * sizeof (char *));
+	      }
+	    continue;
+	  }
+	case N_LSYM:		/* Typedef or automatic variable. */
+	case N_STSYM:		/* Data seg var -- static  */
+	case N_LCSYM:		/* BSS      "  */
+	case N_ROSYM:		/* Read-only data seg var -- static.  */
+	case N_NBSTS:           /* Gould nobase.  */
+	case N_NBLCS:           /* symbols.  */
+	case N_FUN:
+	case N_GSYM:		/* Global (extern) variable; can be
+				   data or bss (sigh FIXME).  */
+
+	/* Following may probably be ignored; I'll leave them here
+	   for now (until I do Pascal and Modula 2 extensions).  */
+
+	case N_PC:		/* I may or may not need this; I
+				   suspect not.  */
+	case N_M2C:		/* I suspect that I can ignore this here. */
+	case N_SCOPE:		/* Same.   */
+
+	  SET_NAMESTRING();
+
+#ifdef DBXREAD_ONLY
+	  /* See if this is an end of function stab.  */
+	  if (CUR_SYMBOL_TYPE == N_FUN && *namestring == '\000')
+	    {
+	      unsigned long valu;
+
+	      /* It's value is the size (in bytes) of the function for
+		 function relative stabs, or the address of the function's
+		 end for old style stabs.  */
+	      valu = CUR_SYMBOL_VALUE + last_function_start;
+	      if (pst->texthigh == 0 || valu > pst->texthigh)
+		pst->texthigh = valu;
+	      break;
+	     }
+#endif
+
+	  p = (char *) strchr (namestring, ':');
+	  if (!p)
+	    continue;		/* Not a debugging symbol.   */
+
+
+
+	  /* Main processing section for debugging symbols which
+	     the initial read through the symbol tables needs to worry
+	     about.  If we reach this point, the symbol which we are
+	     considering is definitely one we are interested in.
+	     p must also contain the (valid) index into the namestring
+	     which indicates the debugging type symbol.  */
+
+	  switch (p[1])
+	    {
+	    case 'S':
+	      CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_DATA);
+#ifdef STATIC_TRANSFORM_NAME
+	      namestring = STATIC_TRANSFORM_NAME (namestring);
+#endif
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_STATIC,
+				   &objfile->static_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+	    case 'G':
+	      CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_DATA);
+	      /* The addresses in these entries are reported to be
+		 wrong.  See the code that reads 'G's for symtabs. */
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_STATIC,
+				   &objfile->global_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+
+	    case 'T':
+	      if (p != namestring)	/* a name is there, not just :T... */
+		{
+		  add_psymbol_to_list (namestring, p - namestring,
+				       STRUCT_NAMESPACE, LOC_TYPEDEF,
+				       &objfile->static_psymbols,
+				       CUR_SYMBOL_VALUE, 0,
+				       psymtab_language, objfile);
+		  if (p[2] == 't')
+		    {
+		      /* Also a typedef with the same name.  */
+		      add_psymbol_to_list (namestring, p - namestring,
+					   VAR_NAMESPACE, LOC_TYPEDEF,
+					   &objfile->static_psymbols,
+					   CUR_SYMBOL_VALUE, 0,
+					   psymtab_language, objfile);
+		      p += 1;
+		    }
+		  /* The semantics of C++ state that "struct foo { ... }"
+		     also defines a typedef for "foo".  Unfortuantely, cfront
+		     never makes the typedef when translating from C++ to C.
+		     We make the typedef here so that "ptype foo" works as
+		     expected for cfront translated code.  */
+		  else if (psymtab_language == language_cplus)
+		   {
+		      /* Also a typedef with the same name.  */
+		      add_psymbol_to_list (namestring, p - namestring,
+					   VAR_NAMESPACE, LOC_TYPEDEF,
+					   &objfile->static_psymbols,
+					   CUR_SYMBOL_VALUE, 0,
+					   psymtab_language, objfile);
+		   }
+		}
+	      goto check_enum;
+	    case 't':
+	      if (p != namestring)	/* a name is there, not just :T... */
+		{
+		  add_psymbol_to_list (namestring, p - namestring,
+				       VAR_NAMESPACE, LOC_TYPEDEF,
+				       &objfile->static_psymbols,
+				       CUR_SYMBOL_VALUE, 0,
+				       psymtab_language, objfile);
+		}
+	    check_enum:
+	      /* If this is an enumerated type, we need to
+		 add all the enum constants to the partial symbol
+		 table.  This does not cover enums without names, e.g.
+		 "enum {a, b} c;" in C, but fortunately those are
+		 rare.  There is no way for GDB to find those from the
+		 enum type without spending too much time on it.  Thus
+		 to solve this problem, the compiler needs to put out the
+		 enum in a nameless type.  GCC2 does this.  */
+
+	      /* We are looking for something of the form
+		 <name> ":" ("t" | "T") [<number> "="] "e"
+		 {<constant> ":" <value> ","} ";".  */
+
+	      /* Skip over the colon and the 't' or 'T'.  */
+	      p += 2;
+	      /* This type may be given a number.  Also, numbers can come
+		 in pairs like (0,26).  Skip over it.  */
+	      while ((*p >= '0' && *p <= '9')
+		     || *p == '(' || *p == ',' || *p == ')'
+		     || *p == '=')
+		p++;
+
+	      if (*p++ == 'e')
+		{
+		  /* The aix4 compiler emits extra crud before the members.  */
+		  if (*p == '-')
+		    {
+		      /* Skip over the type (?).  */
+		      while (*p != ':')
+			p++;
+
+		      /* Skip over the colon.  */
+		      p++;
+		    }
+
+		  /* We have found an enumerated type.  */
+		  /* According to comments in read_enum_type
+		     a comma could end it instead of a semicolon.
+		     I don't know where that happens.
+		     Accept either.  */
+		  while (*p && *p != ';' && *p != ',')
+		    {
+		      char *q;
+
+		      /* Check for and handle cretinous dbx symbol name
+			 continuation!  */
+		      if (*p == '\\' || (*p == '?' && p[1] == '\0'))
+			p = next_symbol_text (objfile);
+
+		      /* Point to the character after the name
+			 of the enum constant.  */
+		      for (q = p; *q && *q != ':'; q++)
+			;
+		      /* Note that the value doesn't matter for
+			 enum constants in psymtabs, just in symtabs.  */
+		      add_psymbol_to_list (p, q - p,
+					   VAR_NAMESPACE, LOC_CONST,
+					   &objfile->static_psymbols, 0,
+					   0, psymtab_language, objfile);
+		      /* Point past the name.  */
+		      p = q;
+		      /* Skip over the value.  */
+		      while (*p && *p != ',')
+			p++;
+		      /* Advance past the comma.  */
+		      if (*p)
+			p++;
+		    }
+		}
+	      continue;
+	    case 'c':
+	      /* Constant, e.g. from "const" in Pascal.  */
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_CONST,
+				   &objfile->static_psymbols, CUR_SYMBOL_VALUE,
+				   0, psymtab_language, objfile);
+	      continue;
+
+	    case 'f':
+	      CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+#ifdef DBXREAD_ONLY
+	      /* Keep track of the start of the last function so we
+		 can handle end of function symbols.  */
+	      last_function_start = CUR_SYMBOL_VALUE;
+	      /* Kludges for ELF/STABS with Sun ACC */
+	      last_function_name = namestring;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
+		 value for the bottom of the text seg in those cases. */
+	      if (pst && textlow_not_set)
+		{
+		  pst->textlow =
+		    find_stab_function_addr (namestring, pst, objfile);
+		  textlow_not_set = 0;
+		}
+#endif
+#if 0
+	      if (startup_file_end == 0)
+		startup_file_end = CUR_SYMBOL_VALUE;
+#endif
+	      /* End kludge.  */
+
+	      /* In reordered executables this function may lie outside
+		 the bounds created by N_SO symbols.  If that's the case
+		 use the address of this function as the low bound for
+		 the partial symbol table.  */
+	      if (textlow_not_set
+		  || (CUR_SYMBOL_VALUE < pst->textlow
+		      && CUR_SYMBOL_VALUE
+			   != ANOFFSET (section_offsets, SECT_OFF_TEXT)))
+		{
+		  pst->textlow = CUR_SYMBOL_VALUE;
+		  textlow_not_set = 0;
+		}
+#endif /* DBXREAD_ONLY */
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_BLOCK,
+				   &objfile->static_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+
+	      /* Global functions were ignored here, but now they
+	         are put into the global psymtab like one would expect.
+		 They're also in the minimal symbol table.  */
+	    case 'F':
+	      CUR_SYMBOL_VALUE += ANOFFSET (section_offsets, SECT_OFF_TEXT);
+#ifdef DBXREAD_ONLY
+	      /* Keep track of the start of the last function so we
+		 can handle end of function symbols.  */
+	      last_function_start = CUR_SYMBOL_VALUE;
+	      /* Kludges for ELF/STABS with Sun ACC */
+	      last_function_name = namestring;
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	      /* Do not fix textlow==0 for .o or NLM files, as 0 is a legit
+		 value for the bottom of the text seg in those cases. */
+	      if (pst && textlow_not_set)
+		{
+		  pst->textlow =
+		    find_stab_function_addr (namestring, pst, objfile);
+		  textlow_not_set = 0;
+		}
+#endif
+#if 0
+	      if (startup_file_end == 0)
+		startup_file_end = CUR_SYMBOL_VALUE;
+#endif
+	      /* End kludge.  */
+	      /* In reordered executables this function may lie outside
+		 the bounds created by N_SO symbols.  If that's the case
+		 use the address of this function as the low bound for
+		 the partial symbol table.  */
+	      if (textlow_not_set
+		  || (CUR_SYMBOL_VALUE < pst->textlow
+		      && CUR_SYMBOL_VALUE
+			   != ANOFFSET (section_offsets, SECT_OFF_TEXT)))
+		{
+		  pst->textlow = CUR_SYMBOL_VALUE;
+		  textlow_not_set = 0;
+		}
+#endif /* DBXREAD_ONLY */
+	      add_psymbol_to_list (namestring, p - namestring,
+				   VAR_NAMESPACE, LOC_BLOCK,
+				   &objfile->global_psymbols,
+				   0, CUR_SYMBOL_VALUE,
+				   psymtab_language, objfile);
+	      continue;
+
+	      /* Two things show up here (hopefully); static symbols of
+		 local scope (static used inside braces) or extensions
+		 of structure symbols.  We can ignore both.  */
+	    case 'V':
+	    case '(':
+	    case '0':
+	    case '1':
+	    case '2':
+	    case '3':
+	    case '4':
+	    case '5':
+	    case '6':
+	    case '7':
+	    case '8':
+	    case '9':
+	    case '-':
+	    case '#':   /* for symbol identification (used in live ranges) */
+	   /* added to support cfront stabs strings */
+	    case 'Z':	/* for definition continuations */
+	    case 'P':	/* for prototypes */
+	      continue;
+
+	    case ':':
+	      /* It is a C++ nested symbol.  We don't need to record it
+		 (I don't think); if we try to look up foo::bar::baz,
+		 then symbols for the symtab containing foo should get
+		 read in, I think.  */
+	      /* Someone says sun cc puts out symbols like
+		 /foo/baz/maclib::/usr/local/bin/maclib,
+		 which would get here with a symbol type of ':'.  */
+	      continue;
+
+	    default:
+	      /* Unexpected symbol descriptor.  The second and subsequent stabs
+		 of a continued stab can show up here.  The question is
+		 whether they ever can mimic a normal stab--it would be
+		 nice if not, since we certainly don't want to spend the
+		 time searching to the end of every string looking for
+		 a backslash.  */
+
+	      complain (&unknown_symchar_complaint, p[1]);
+
+	      /* Ignore it; perhaps it is an extension that we don't
+		 know about.  */
+	      continue;
+	    }
+
+	case N_EXCL:
+#ifdef DBXREAD_ONLY
+
+	  SET_NAMESTRING();
+
+	  /* Find the corresponding bincl and mark that psymtab on the
+	     psymtab dependency list */
+	  {
+	    struct partial_symtab *needed_pst =
+	      find_corresponding_bincl_psymtab (namestring, CUR_SYMBOL_VALUE);
+
+	    /* If this include file was defined earlier in this file,
+	       leave it alone.  */
+	    if (needed_pst == pst) continue;
+
+	    if (needed_pst)
+	      {
+		int i;
+		int found = 0;
+
+		for (i = 0; i < dependencies_used; i++)
+		  if (dependency_list[i] == needed_pst)
+		    {
+		      found = 1;
+		      break;
+		    }
+
+		/* If it's already in the list, skip the rest.  */
+		if (found) continue;
+
+		dependency_list[dependencies_used++] = needed_pst;
+		if (dependencies_used >= dependencies_allocated)
+		  {
+		    struct partial_symtab **orig = dependency_list;
+		    dependency_list =
+		      (struct partial_symtab **)
+			alloca ((dependencies_allocated *= 2)
+				* sizeof (struct partial_symtab *));
+		    memcpy ((PTR)dependency_list, (PTR)orig,
+			   (dependencies_used
+			    * sizeof (struct partial_symtab *)));
+#ifdef DEBUG_INFO
+		    fprintf_unfiltered (gdb_stderr, "Had to reallocate dependency list.\n");
+		    fprintf_unfiltered (gdb_stderr, "New dependencies allocated: %d\n",
+			     dependencies_allocated);
+#endif
+		  }
+	      }
+	  }
+#endif /* DBXREAD_ONLY */
+	  continue;
+
+	case N_ENDM:
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+	  /* Solaris 2 end of module, finish current partial symbol table.
+	     END_PSYMTAB will set pst->texthigh to the proper value, which
+	     is necessary if a module compiled without debugging info
+	     follows this module.  */
+	  if (pst)
+	    {
+	      END_PSYMTAB (pst, psymtab_include_list, includes_used,
+			   symnum * symbol_size,
+			   (CORE_ADDR) 0,
+			   dependency_list, dependencies_used, textlow_not_set);
+	      pst = (struct partial_symtab *) 0;
+	      includes_used = 0;
+	      dependencies_used = 0;
+	    }
+#endif
+	  continue;
+
+	case N_RBRAC:
+#ifdef HANDLE_RBRAC
+	  HANDLE_RBRAC(CUR_SYMBOL_VALUE);
+	  continue;
+#endif
+	case N_EINCL:
+	case N_DSLINE:
+	case N_BSLINE:
+	case N_SSYM:		/* Claim: Structure or union element.
+				   Hopefully, I can ignore this.  */
+	case N_ENTRY:		/* Alternate entry point; can ignore. */
+	case N_MAIN:		/* Can definitely ignore this.   */
+	case N_CATCH:		/* These are GNU C++ extensions */
+	case N_EHDECL:		/* that can safely be ignored here. */
+	case N_LENG:
+	case N_BCOMM:
+	case N_ECOMM:
+	case N_ECOML:
+	case N_FNAME:
+	case N_SLINE:
+	case N_RSYM:
+	case N_PSYM:
+	case N_LBRAC:
+	case N_NSYMS:		/* Ultrix 4.0: symbol count */
+	case N_DEFD:		/* GNU Modula-2 */
+	case N_ALIAS:		/* SunPro F77: alias name, ignore for now.  */
+
+	case N_OBJ:		/* useless types from Solaris */
+	case N_OPT:
+	  /* These symbols aren't interesting; don't worry about them */
+
+	  continue;
+
+	default:
+	  /* If we haven't found it yet, ignore it.  It's probably some
+	     new type we don't know about yet.  */
+	  complain (&unknown_symtype_complaint,
+		    local_hex_string (CUR_SYMBOL_TYPE));
+	  continue;
+	}
diff --git a/gdb/ppc-bdm.c b/gdb/ppc-bdm.c
new file mode 100644
index 0000000..e6b6adf
--- /dev/null
+++ b/gdb/ppc-bdm.c
@@ -0,0 +1,387 @@
+/* Remote target communications for the Macraigor Systems BDM Wiggler
+   talking to a Motorola PPC 8xx ADS board
+   Copyright 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include <sys/types.h>
+#include <signal.h>
+#include "serial.h"
+#include "ocd.h"
+
+static void bdm_ppc_open PARAMS ((char *name, int from_tty));
+
+static int bdm_ppc_wait PARAMS ((int pid,
+				 struct target_waitstatus *target_status));
+
+static void bdm_ppc_fetch_registers PARAMS ((int regno));
+
+static void bdm_ppc_store_registers PARAMS ((int regno));
+
+extern struct target_ops bdm_ppc_ops;	/* Forward decl */
+
+/*#define BDM_NUM_REGS 71*/
+#define BDM_NUM_REGS 24
+
+#define BDM_REGMAP \
+	2048, 2049, 2050, 2051, 2052, 2053, 2054, 2055, /* r0-r7 */ \
+	2056, 2057, 2058, 2059, 2060, 2061, 2062, 2063, /* r8-r15 */ \
+	2064, 2065, 2066, 2067, 2068, 2069, 2070, 2071, /* r16-r23 */ \
+	2072, 2073, 2074, 2075, 2076, 2077, 2078, 2079, /* r24-r31 */ \
+\
+	2080, 2082, 2084, 2086, 2088, 2090, 2092, 2094, /* fp0->fp8 */ \
+	2096, 2098, 2100, 2102, 2104, 2106, 2108, 2110, /* fp0->fp8 */ \
+	2112, 2114, 2116, 2118, 2120, 2122, 2124, 2126, /* fp0->fp8 */ \
+	2128, 2130, 2132, 2134, 2136, 2138, 2140, 2142, /* fp0->fp8 */ \
+\
+	26,        /* pc (SRR0 (SPR 26)) */ \
+	2146,      /* ps (MSR) */ \
+	2144,      /* cnd (CR) */ \
+	8,         /* lr (SPR 8) */ \
+	9,         /* cnt (CTR (SPR 9)) */ \
+	1,         /* xer (SPR 1) */ \
+	0,         /* mq (SPR 0) */
+
+
+char nowatchdog[4] = {0xff,0xff,0xff,0x88};
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static void
+bdm_ppc_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  CORE_ADDR watchdogaddr = 0xff000004;
+
+  ocd_open (name, from_tty, OCD_TARGET_MOTO_PPC, &bdm_ppc_ops);
+
+  /* We want interrupts to drop us into debugging mode. */
+  /* Modify the DER register to accomplish this. */
+  ocd_write_bdm_register (149, 0x20024000);
+
+  /* Disable watchdog timer on the board */
+  ocd_write_bytes (watchdogaddr, nowatchdog, 4);
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.
+   Returns "pid" (though it's not clear what, if anything, that
+   means in the case of this target).  */
+
+static int
+bdm_ppc_wait (pid, target_status)
+     int pid;
+     struct target_waitstatus *target_status;
+{
+  int stop_reason;
+
+  target_status->kind = TARGET_WAITKIND_STOPPED;
+
+  stop_reason = ocd_wait ();
+
+  if (stop_reason)
+    {
+      target_status->value.sig = TARGET_SIGNAL_INT;
+      return inferior_pid;
+    }
+
+  target_status->value.sig = TARGET_SIGNAL_TRAP; /* XXX for now */
+
+#if 0
+  {
+    unsigned long ecr, der;
+
+    ecr = ocd_read_bdm_register (148); /* Read the exception cause register */
+    der = ocd_read_bdm_register (149); /* Read the debug enables register */
+    fprintf_unfiltered (gdb_stdout, "ecr = 0x%x, der = 0x%x\n", ecr, der);
+  }
+#endif
+
+  return inferior_pid;
+}
+
+static int bdm_regmap[] = {BDM_REGMAP};
+
+/* Read the remote registers into regs.
+   Fetch register REGNO, or all registers if REGNO == -1
+
+   The Wiggler uses the following codes to access the registers:
+
+   0 -> 1023		SPR 0 -> 1023
+	0 - SPR 0 - MQ
+	1 - SPR 1 - XER
+	8 - SPR 8 - LR
+	9 - SPR 9 - CTR (known as cnt in GDB)
+	26 - SPR 26 - SRR0 - pc
+   1024 -> 2047		DCR 0 -> DCR 1023 (IBM PPC 4xx only)
+   2048 -> 2079		R0 -> R31
+   2080 -> 2143		FP0 -> FP31 (64 bit regs) (IBM PPC 5xx only)
+   2144			CR (known as cnd in GDB)
+   2145			FPCSR
+   2146			MSR (known as ps in GDB)
+ */
+
+static void
+bdm_ppc_fetch_registers (regno)
+     int regno;
+{
+  int i;
+  unsigned char *regs, *beginregs, *endregs, *almostregs;
+  unsigned char midregs[32];
+  unsigned char mqreg[1];
+  int first_regno, last_regno;
+  int first_bdm_regno, last_bdm_regno;
+  int reglen, beginreglen, endreglen;
+
+#if 1
+  for (i = 0; i < (FPLAST_REGNUM - FP0_REGNUM + 1); i++)
+    {
+      midregs[i] = -1;
+    }
+  mqreg[0] = -1;
+#endif
+
+  if (regno == -1)
+    {
+      first_regno = 0;
+      last_regno = NUM_REGS - 1;
+
+      first_bdm_regno = 0;
+      last_bdm_regno = BDM_NUM_REGS - 1;
+    }
+  else
+    {
+      first_regno = regno;
+      last_regno = regno;
+
+      first_bdm_regno = bdm_regmap [regno];
+      last_bdm_regno = bdm_regmap [regno];
+    }
+
+  if (first_bdm_regno == -1)
+    {
+      supply_register (first_regno, NULL);
+      return;			/* Unsupported register */
+    }
+
+#if 1
+  /* Can't ask for floating point regs on ppc 8xx, also need to
+     avoid asking for the mq register. */
+  if (first_regno == last_regno)	/* only want one reg */
+    {
+/*      printf("Asking for register %d\n", first_regno); */
+
+      /* if asking for an invalid register */
+      if ((first_regno == MQ_REGNUM) ||
+          ((first_regno >= FP0_REGNUM) && (first_regno <= FPLAST_REGNUM)))
+	{
+/*          printf("invalid reg request!\n"); */
+          supply_register (first_regno, NULL);
+          return;                   /* Unsupported register */
+        }
+      else
+	{
+          regs = ocd_read_bdm_registers (first_bdm_regno,
+						last_bdm_regno, &reglen);
+        }
+    }
+  else		/* want all regs */
+    {
+/*      printf("Asking for registers %d to %d\n", first_regno, last_regno); */
+      beginregs = ocd_read_bdm_registers (first_bdm_regno,
+					FP0_REGNUM - 1, &beginreglen);
+      endregs = (strcat (midregs, 
+				ocd_read_bdm_registers (FPLAST_REGNUM + 1,
+					last_bdm_regno - 1, &endreglen)));
+      almostregs = (strcat (beginregs, endregs));
+      regs = (strcat (almostregs, mqreg));
+      reglen = beginreglen + 32 + endreglen + 1;
+    }
+
+#endif
+#if 0
+  regs = ocd_read_bdm_registers (first_bdm_regno, last_bdm_regno, &reglen);
+#endif
+
+  for (i = first_regno; i <= last_regno; i++)
+    {
+      int bdm_regno, regoffset;
+
+      bdm_regno = bdm_regmap [i];
+      if (bdm_regno != -1)
+	{
+	  regoffset = bdm_regno - first_bdm_regno;
+
+	  if (regoffset >= reglen / 4)
+	    continue;
+
+	  supply_register (i, regs + 4 * regoffset);
+	}
+      else
+	supply_register (i, NULL); /* Unsupported register */
+    }
+}
+
+/* Store register REGNO, or all registers if REGNO == -1, from the contents
+   of REGISTERS.  FIXME: ignores errors.  */
+
+static void
+bdm_ppc_store_registers (regno)
+     int regno;
+{
+  int i;
+  int first_regno, last_regno;
+  int first_bdm_regno, last_bdm_regno;
+
+  if (regno == -1)
+    {
+      first_regno = 0;
+      last_regno = NUM_REGS - 1;
+
+      first_bdm_regno = 0;
+      last_bdm_regno = BDM_NUM_REGS - 1;
+    }
+  else
+    {
+      first_regno = regno;
+      last_regno = regno;
+
+      first_bdm_regno = bdm_regmap [regno];
+      last_bdm_regno = bdm_regmap [regno];
+    }
+
+  if (first_bdm_regno == -1)
+    return;			/* Unsupported register */
+
+  for (i = first_regno; i <= last_regno; i++)
+    {
+      int bdm_regno;
+
+      bdm_regno = bdm_regmap [i];
+
+      /* only attempt to write if it's a valid ppc 8xx register */
+      /* (need to avoid FP regs and MQ reg) */
+      if ((i != MQ_REGNUM) && ((i < FP0_REGNUM) || (i > FPLAST_REGNUM)))
+	{
+/*          printf("write valid reg %d\n", bdm_regno); */
+          ocd_write_bdm_registers (bdm_regno, registers + REGISTER_BYTE (i), 4);
+        }
+/*
+      else if (i == MQ_REGNUM)
+        printf("don't write invalid reg %d (MQ_REGNUM)\n", bdm_regno);
+      else
+        printf("don't write invalid reg %d\n", bdm_regno);
+*/
+    }
+}
+
+/* Define the target subroutine names */
+
+struct target_ops bdm_ppc_ops ;
+
+static void 
+init_bdm_ppc_ops(void)
+{
+  bdm_ppc_ops.to_shortname =   "ocd";		
+  bdm_ppc_ops.to_longname =   "Remote target with On-Chip Debugging";
+  bdm_ppc_ops.to_doc =   "Use a remote target with On-Chip Debugging.  To use a target box;\n\
+specify the serial device it is connected to (e.g. /dev/ttya).  To use\n\
+a wiggler, specify wiggler and then the port it is connected to\n\
+(e.g. wiggler lpt1)." ;	/* to_doc */
+  bdm_ppc_ops.to_open =   bdm_ppc_open;	
+  bdm_ppc_ops.to_close =   ocd_close;	
+  bdm_ppc_ops.to_attach =   NULL;
+  bdm_ppc_ops.to_post_attach = NULL;
+  bdm_ppc_ops.to_require_attach = NULL;
+  bdm_ppc_ops.to_detach =   ocd_detach;
+  bdm_ppc_ops.to_require_detach = NULL;
+  bdm_ppc_ops.to_resume =   ocd_resume;	
+  bdm_ppc_ops.to_wait  =   bdm_ppc_wait;
+  bdm_ppc_ops.to_post_wait = NULL;
+  bdm_ppc_ops.to_fetch_registers  =   bdm_ppc_fetch_registers;
+  bdm_ppc_ops.to_store_registers  =   bdm_ppc_store_registers;
+  bdm_ppc_ops.to_prepare_to_store =   ocd_prepare_to_store;	
+  bdm_ppc_ops.to_xfer_memory  =   ocd_xfer_memory;		
+  bdm_ppc_ops.to_files_info  =   ocd_files_info;		
+  bdm_ppc_ops.to_insert_breakpoint =   ocd_insert_breakpoint;	
+  bdm_ppc_ops.to_remove_breakpoint =   ocd_remove_breakpoint;	
+  bdm_ppc_ops.to_terminal_init  =   NULL;			
+  bdm_ppc_ops.to_terminal_inferior =   NULL;			
+  bdm_ppc_ops.to_terminal_ours_for_output =   NULL;		
+  bdm_ppc_ops.to_terminal_ours  =   NULL;			
+  bdm_ppc_ops.to_terminal_info  =   NULL;			
+  bdm_ppc_ops.to_kill  =   ocd_kill;		
+  bdm_ppc_ops.to_load  =   ocd_load;		
+  bdm_ppc_ops.to_lookup_symbol =   NULL;	
+  bdm_ppc_ops.to_create_inferior =   ocd_create_inferior;
+  bdm_ppc_ops.to_post_startup_inferior = NULL;
+  bdm_ppc_ops.to_acknowledge_created_inferior = NULL;
+  bdm_ppc_ops.to_clone_and_follow_inferior = NULL;          
+  bdm_ppc_ops.to_post_follow_inferior_by_clone = NULL;  
+  bdm_ppc_ops.to_insert_fork_catchpoint = NULL;
+  bdm_ppc_ops.to_remove_fork_catchpoint = NULL;
+  bdm_ppc_ops.to_insert_vfork_catchpoint = NULL;
+  bdm_ppc_ops.to_remove_vfork_catchpoint = NULL;                      
+  bdm_ppc_ops.to_has_forked = NULL;
+  bdm_ppc_ops.to_has_vforked = NULL;            
+  bdm_ppc_ops.to_can_follow_vfork_prior_to_exec = NULL;            
+  bdm_ppc_ops.to_post_follow_vfork = NULL;
+  bdm_ppc_ops.to_insert_exec_catchpoint = NULL;
+  bdm_ppc_ops.to_remove_exec_catchpoint = NULL;
+  bdm_ppc_ops.to_has_execd = NULL;
+  bdm_ppc_ops.to_reported_exec_events_per_exec_call = NULL;
+  bdm_ppc_ops.to_has_exited = NULL;
+  bdm_ppc_ops.to_mourn_inferior =   ocd_mourn;	
+  bdm_ppc_ops.to_can_run  =   0;		
+  bdm_ppc_ops.to_notice_signals =   0;		
+  bdm_ppc_ops.to_thread_alive  =   ocd_thread_alive;
+  bdm_ppc_ops.to_stop  =   ocd_stop;
+  bdm_ppc_ops.to_pid_to_exec_file = NULL;
+  bdm_ppc_ops.to_core_file_to_sym_file = NULL; 		
+  bdm_ppc_ops.to_stratum =   process_stratum;		
+  bdm_ppc_ops.DONT_USE =   NULL;			
+  bdm_ppc_ops.to_has_all_memory =   1;			
+  bdm_ppc_ops.to_has_memory =   1;			
+  bdm_ppc_ops.to_has_stack =   1;			
+  bdm_ppc_ops.to_has_registers =   1;			
+  bdm_ppc_ops.to_has_execution =   1;			
+  bdm_ppc_ops.to_sections =   NULL;			
+  bdm_ppc_ops.to_sections_end =   NULL;			
+  bdm_ppc_ops.to_magic =   OPS_MAGIC ;			
+} /* init_bdm_ppc_ops */
+
+void
+_initialize_bdm_ppc ()
+{
+  init_bdm_ppc_ops() ;
+  add_target (&bdm_ppc_ops);
+}
diff --git a/gdb/ppcbug-rom.c b/gdb/ppcbug-rom.c
new file mode 100644
index 0000000..9496916
--- /dev/null
+++ b/gdb/ppcbug-rom.c
@@ -0,0 +1,230 @@
+/* Remote debugging interface for PPCbug (PowerPC) Rom monitor
+   for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+   Written by Stu Grossman of Cygnus Support
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void ppcbug_open PARAMS ((char *args, int from_tty));
+
+static void
+ppcbug_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno = 0, base = 0;
+
+  if (regnamelen < 2 || regnamelen > 4)
+    return;
+
+  switch (regname[0])
+    {
+    case 'R':
+      if (regname[1] < '0' || regname[1] > '9')
+	return;
+      if (regnamelen == 2)
+	regno = regname[1] - '0';
+      else if (regnamelen == 3 && regname[2] >= '0' && regname[2] <= '9')
+	regno = (regname[1] - '0') * 10 + (regname[2] - '0');
+      else
+	return;
+      break;
+    case 'F':
+      if (regname[1] != 'R' || regname[2] < '0' || regname[2] > '9')
+	return;
+      if (regnamelen == 3)
+	regno = 32 + regname[2] - '0';
+      else if (regnamelen == 4 && regname[3] >= '0' && regname[3] <= '9')
+	regno = 32 + (regname[2] - '0') * 10 + (regname[3] - '0');
+      else
+	return;
+      break;
+    case 'I':
+      if (regnamelen != 2 || regname[1] != 'P')
+	return;
+      regno = 64;
+      break;
+    case 'M':
+      if (regnamelen != 3 || regname[1] != 'S' || regname[2] != 'R')
+	return;
+      regno = 65;
+      break;
+    case 'C':
+      if (regnamelen != 2 || regname[1] != 'R')
+	return;
+      regno = 66;
+      break;
+    case 'S':
+      if (regnamelen != 4 || regname[1] != 'P' || regname[2] != 'R')
+	return;
+      else if (regname[3] == '8')
+	regno = 67;
+      else if (regname[3] == '9')
+	regno = 68;
+      else if (regname[3] == '1')
+	regno = 69;
+      else if (regname[3] == '0')
+	regno = 70;
+      else
+	return;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/*
+ * This array of registers needs to match the indexes used by GDB. The
+ * whole reason this exists is because the various ROM monitors use
+ * different names than GDB does, and don't support all the
+ * registers either. So, typing "info reg sp" becomes an "A7".
+ */
+
+static char *ppcbug_regnames[NUM_REGS] =
+{
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "r16",  "r17",  "r18",  "r19",  "r20",  "r21",  "r22",  "r23",
+  "r24",  "r25",  "r26",  "r27",  "r28",  "r29",  "r30",  "r31",
+
+  "fr0",  "fr1",  "fr2",  "fr3",  "fr4",  "fr5",  "fr6",  "fr7",
+  "fr8",  "fr9",  "fr10", "fr11", "fr12", "fr13", "fr14", "fr15",
+  "fr16", "fr17", "fr18", "fr19", "fr20", "fr21", "fr22", "fr23",
+  "fr24", "fr25", "fr26", "fr27", "fr28", "fr29", "fr30", "fr31",
+
+/* pc      ps      cnd     lr      cnt     xer     mq */
+  "ip",   "msr",  "cr",   "spr8", "spr9", "spr1", "spr0"
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops ppcbug_ops0;
+static struct target_ops ppcbug_ops1;
+
+static char *ppcbug_inits[] = {"\r", NULL};
+
+static void
+init_ppc_cmds (char  * LOAD_CMD,
+	       struct monitor_ops * OPS,
+	       struct target_ops * targops)
+{
+  OPS->flags = MO_CLR_BREAK_USES_ADDR | MO_HANDLE_NL;	
+  OPS->init = ppcbug_inits;		/* Init strings */
+  OPS->cont = "g\r";			/* continue command */		
+  OPS->step = "t\r";			/* single step */		
+  OPS->stop = NULL;			/* interrupt command */	
+  OPS->set_break = "br %x\r";		/* set a breakpoint */	
+  OPS->clr_break = "nobr %x\r";		/* clear a breakpoint */
+  OPS->clr_all_break = "nobr\r";	/* clear all breakpoints */
+  OPS->fill = "bf %x:%x %x;b\r";	/* fill (start count val) */		
+  OPS->setmem.cmdb = "ms %x %02x\r";	/* setmem.cmdb (addr, value) */		
+  OPS->setmem.cmdw = "ms %x %04x\r";	/* setmem.cmdw (addr, value) */		
+  OPS->setmem.cmdl = "ms %x %08x\r";	/* setmem.cmdl (addr, value) */		
+  OPS->setmem.cmdll = NULL;		/* setmem.cmdll (addr, value) */	
+  OPS->setmem.resp_delim = NULL;	/* setreg.resp_delim */		
+  OPS->setmem.term = NULL;		/* setreg.term */			
+  OPS->setmem.term_cmd = NULL;		/* setreg.term_cmd */		
+  OPS->getmem.cmdb = "md %x:%x;b\r";	/* getmem.cmdb (addr, len) */		
+  OPS->getmem.cmdw = "md %x:%x;b\r";	/* getmem.cmdw (addr, len) */		
+  OPS->getmem.cmdl = "md %x:%x;b\r";	/* getmem.cmdl (addr, len) */		
+  OPS->getmem.cmdll = NULL;		/* getmem.cmdll (addr, len) */		
+  OPS->getmem.resp_delim = " ";		/* getmem.resp_delim */		
+  OPS->getmem.term = NULL;		/* getmem.term */			
+  OPS->getmem.term_cmd = NULL;		/* getmem.term_cmd */		
+  OPS->setreg.cmd = "rs %s %x\r";	/* setreg.cmd (name, value) */		
+  OPS->setreg.resp_delim = NULL;	/* setreg.resp_delim */		
+  OPS->setreg.term = NULL;		/* setreg.term */			
+  OPS->setreg.term_cmd = NULL	;	/* setreg.term_cmd */			
+  OPS->getreg.cmd = "rs %s\r";		/* getreg.cmd (name) */		
+  OPS->getreg.resp_delim = "=";		/* getreg.resp_delim */		
+  OPS->getreg.term = NULL;		/* getreg.term */			
+  OPS->getreg.term_cmd = NULL	;	/* getreg.term_cmd */			
+  OPS->register_pattern = "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)"; /* register_pattern */	
+  OPS->supply_register = ppcbug_supply_register;	/* supply_register */		
+  OPS->dump_registers = "rd\r";		/* dump all registers */
+  OPS->load_routine = NULL;		/* load_routine (defaults to SRECs) */	
+  OPS->load = LOAD_CMD;			/* download command */		        	
+  OPS->loadresp = NULL;			/* load response */			
+  OPS->prompt = "PPC1-Bug>";		/* monitor command prompt */		
+  OPS->line_term = "\r";		/* end-of-line terminator */	
+  OPS->cmd_end = NULL;			/* optional command terminator */	
+  OPS->target = targops ;		/* target operations */			
+  OPS->stopbits = SERIAL_1_STOPBITS;	/* number of stop bits */		
+  OPS->regnames = ppcbug_regnames;	/* registers names */			
+  OPS->magic = MONITOR_OPS_MAGIC;	/* magic */				
+}
+
+
+static struct monitor_ops ppcbug_cmds0 ;
+static struct monitor_ops ppcbug_cmds1 ;
+
+static void
+ppcbug_open0(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &ppcbug_cmds0, from_tty);
+}
+
+static void
+ppcbug_open1(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &ppcbug_cmds1, from_tty);
+}
+
+void
+_initialize_ppcbug_rom ()
+{
+  init_ppc_cmds("lo 0\r", &ppcbug_cmds0, &ppcbug_ops0) ;
+  init_ppc_cmds("lo 1\r", &ppcbug_cmds1, &ppcbug_ops1);
+  init_monitor_ops (&ppcbug_ops0);
+
+  ppcbug_ops0.to_shortname = "ppcbug";
+  ppcbug_ops0.to_longname = "PowerPC PPCBug monitor on port 0";
+  ppcbug_ops0.to_doc = "Debug via the PowerPC PPCBug monitor using port 0.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  ppcbug_ops0.to_open = ppcbug_open0;
+
+  add_target (&ppcbug_ops0);
+
+  init_monitor_ops (&ppcbug_ops1);
+
+  ppcbug_ops1.to_shortname = "ppcbug1";
+  ppcbug_ops1.to_longname = "PowerPC PPCBug monitor on port 1";
+  ppcbug_ops1.to_doc = "Debug via the PowerPC PPCBug monitor using port 1.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  ppcbug_ops1.to_open = ppcbug_open1;
+
+  add_target (&ppcbug_ops1);
+}
diff --git a/gdb/printcmd.c b/gdb/printcmd.c
new file mode 100644
index 0000000..0f0b8ab
--- /dev/null
+++ b/gdb/printcmd.c
@@ -0,0 +1,2575 @@
+/* Print values for GNU debugger GDB.
+   Copyright 1986, 87, 88, 89, 90, 91, 93, 94, 95, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "language.h"
+#include "expression.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "demangle.h"
+#include "valprint.h"
+#include "annotate.h"
+#include "symfile.h"	/* for overlay functions */
+#include "objfiles.h"	/* ditto */
+
+extern int asm_demangle;	/* Whether to demangle syms in asm printouts */
+extern int addressprint;	/* Whether to print hex addresses in HLL " */
+
+struct format_data
+{
+  int count;
+  char format;
+  char size;
+};
+
+/* Last specified output format.  */
+
+static char last_format = 'x';
+
+/* Last specified examination size.  'b', 'h', 'w' or `q'.  */
+
+static char last_size = 'w';
+
+/* Default address to examine next.  */
+
+static CORE_ADDR next_address;
+
+/* Default section to examine next. */
+
+static asection *next_section;
+
+/* Last address examined.  */
+
+static CORE_ADDR last_examine_address;
+
+/* Contents of last address examined.
+   This is not valid past the end of the `x' command!  */
+
+static value_ptr last_examine_value;
+
+/* Largest offset between a symbolic value and an address, that will be
+   printed as `0x1234 <symbol+offset>'.  */
+
+static unsigned int max_symbolic_offset = UINT_MAX;
+
+/* Append the source filename and linenumber of the symbol when
+   printing a symbolic value as `<symbol at filename:linenum>' if set.  */
+static int print_symbol_filename = 0;
+
+/* Number of auto-display expression currently being displayed.
+   So that we can disable it if we get an error or a signal within it.
+   -1 when not doing one.  */
+
+int current_display_number;
+
+/* Flag to low-level print routines that this value is being printed
+   in an epoch window.  We'd like to pass this as a parameter, but
+   every routine would need to take it.  Perhaps we can encapsulate
+   this in the I/O stream once we have GNU stdio. */
+
+int inspect_it = 0;
+
+struct display
+{
+  /* Chain link to next auto-display item.  */
+  struct display *next;
+  /* Expression to be evaluated and displayed.  */
+  struct expression *exp;
+  /* Item number of this auto-display item.  */
+  int number;
+  /* Display format specified.  */
+  struct format_data format;
+  /* Innermost block required by this expression when evaluated */
+  struct block *block;
+  /* Status of this display (enabled or disabled) */
+  enum enable status;
+};
+
+/* Chain of expressions whose values should be displayed
+   automatically each time the program stops.  */
+
+static struct display *display_chain;
+
+static int display_number;
+
+/* Prototypes for exported functions. */
+
+void output_command PARAMS ((char *, int));
+
+void _initialize_printcmd PARAMS ((void));
+
+/* Prototypes for local functions. */
+
+static void delete_display PARAMS ((int));
+
+static void enable_display PARAMS ((char *, int));
+
+static void disable_display_command PARAMS ((char *, int));
+
+static void disassemble_command PARAMS ((char *, int));
+
+static void printf_command PARAMS ((char *, int));
+
+static void print_frame_nameless_args PARAMS ((struct frame_info *, long,
+					       int, int, GDB_FILE *));
+
+static void display_info PARAMS ((char *, int));
+
+static void do_one_display PARAMS ((struct display *));
+
+static void undisplay_command PARAMS ((char *, int));
+
+static void free_display PARAMS ((struct display *));
+
+static void display_command PARAMS ((char *, int));
+
+void x_command PARAMS ((char *, int));
+
+static void address_info PARAMS ((char *, int));
+
+static void set_command PARAMS ((char *, int));
+
+static void call_command PARAMS ((char *, int));
+
+static void inspect_command PARAMS ((char *, int));
+
+static void print_command PARAMS ((char *, int));
+
+static void print_command_1 PARAMS ((char *, int, int));
+
+static void validate_format PARAMS ((struct format_data, char *));
+
+static void do_examine PARAMS ((struct format_data, CORE_ADDR addr, asection *section));
+
+static void print_formatted PARAMS ((value_ptr, int, int));
+
+static struct format_data decode_format PARAMS ((char **, int, int));
+
+static int print_insn PARAMS ((CORE_ADDR, GDB_FILE *));
+
+static void sym_info PARAMS ((char *, int));
+
+
+/* Decode a format specification.  *STRING_PTR should point to it.
+   OFORMAT and OSIZE are used as defaults for the format and size
+   if none are given in the format specification.
+   If OSIZE is zero, then the size field of the returned value
+   should be set only if a size is explicitly specified by the
+   user.
+   The structure returned describes all the data
+   found in the specification.  In addition, *STRING_PTR is advanced
+   past the specification and past all whitespace following it.  */
+
+static struct format_data
+decode_format (string_ptr, oformat, osize)
+     char **string_ptr;
+     int oformat;
+     int osize;
+{
+  struct format_data val;
+  register char *p = *string_ptr;
+
+  val.format = '?';
+  val.size = '?';
+  val.count = 1;
+
+  if (*p >= '0' && *p <= '9')
+    val.count = atoi (p);
+  while (*p >= '0' && *p <= '9') p++;
+
+  /* Now process size or format letters that follow.  */
+
+  while (1)
+    {
+      if (*p == 'b' || *p == 'h' || *p == 'w' || *p == 'g')
+	val.size = *p++;
+      else if (*p >= 'a' && *p <= 'z')
+	val.format = *p++;
+      else
+	break;
+    }
+
+  while (*p == ' ' || *p == '\t') p++;
+  *string_ptr = p;
+
+  /* Set defaults for format and size if not specified.  */
+  if (val.format == '?')
+    {
+      if (val.size == '?')
+	{
+	  /* Neither has been specified.  */
+	  val.format = oformat;
+	  val.size = osize;
+	}
+      else
+	/* If a size is specified, any format makes a reasonable
+	   default except 'i'.  */
+	val.format = oformat == 'i' ? 'x' : oformat;
+    }
+  else if (val.size == '?')
+    switch (val.format)
+      {
+      case 'a':
+      case 's':
+	/* Pick the appropriate size for an address.  */
+	if (TARGET_PTR_BIT == 64)
+	  val.size = osize ? 'g' : osize;
+	else if (TARGET_PTR_BIT == 32)
+	  val.size = osize ? 'w' : osize;
+	else if (TARGET_PTR_BIT == 16)
+	  val.size = osize ? 'h' : osize;
+	else
+	  /* Bad value for TARGET_PTR_BIT */
+	  abort ();
+	break;
+      case 'f':
+	/* Floating point has to be word or giantword.  */
+	if (osize == 'w' || osize == 'g')
+	  val.size = osize;
+	else
+	  /* Default it to giantword if the last used size is not
+	     appropriate.  */
+	  val.size = osize ? 'g' : osize;
+	break;
+      case 'c':
+	/* Characters default to one byte.  */
+	val.size = osize ? 'b' : osize;
+	break;
+      default:
+	/* The default is the size most recently specified.  */
+	val.size = osize;
+      }
+
+  return val;
+}
+
+/* Print value VAL on gdb_stdout according to FORMAT, a letter or 0.
+   Do not end with a newline.
+   0 means print VAL according to its own type.
+   SIZE is the letter for the size of datum being printed.
+   This is used to pad hex numbers so they line up.  */
+
+static void
+print_formatted (val, format, size)
+     register value_ptr val;
+     register int format;
+     int size;
+{
+  struct type *type = check_typedef (VALUE_TYPE (val));
+  int len = TYPE_LENGTH (type);
+
+  if (VALUE_LVAL (val) == lval_memory)
+    {
+      next_address = VALUE_ADDRESS (val) + len;
+      next_section = VALUE_BFD_SECTION (val);
+    }
+
+  switch (format)
+    {
+    case 's':
+      /* FIXME: Need to handle wchar_t's here... */
+      next_address = VALUE_ADDRESS (val)
+	+ val_print_string (VALUE_ADDRESS (val), -1, 1, gdb_stdout);
+      next_section = VALUE_BFD_SECTION (val);
+      break;
+
+    case 'i':
+      /* The old comment says
+	 "Force output out, print_insn not using _filtered".
+	 I'm not completely sure what that means, I suspect most print_insn
+	 now do use _filtered, so I guess it's obsolete.
+	   --Yes, it does filter now, and so this is obsolete.  -JB  */
+
+      /* We often wrap here if there are long symbolic names.  */
+      wrap_here ("    ");
+      next_address = VALUE_ADDRESS (val)
+	+ print_insn (VALUE_ADDRESS (val), gdb_stdout);
+      next_section = VALUE_BFD_SECTION (val);
+      break;
+
+    default:
+      if (format == 0
+	  || TYPE_CODE (type) == TYPE_CODE_ARRAY
+	  || TYPE_CODE (type) == TYPE_CODE_STRING
+	  || TYPE_CODE (type) == TYPE_CODE_STRUCT
+	  || TYPE_CODE (type) == TYPE_CODE_UNION)
+        /* If format is 0, use the 'natural' format for
+         * that type of value.  If the type is non-scalar,
+         * we have to use language rules to print it as
+         * a series of scalars.
+         */
+	value_print (val, gdb_stdout, format, Val_pretty_default);
+      else
+        /* User specified format, so don't look to the
+         * the type to tell us what to do.
+         */
+	print_scalar_formatted (VALUE_CONTENTS (val), type,
+				format, size, gdb_stdout);
+    }
+}
+
+/* Print a scalar of data of type TYPE, pointed to in GDB by VALADDR,
+   according to letters FORMAT and SIZE on STREAM.
+   FORMAT may not be zero.  Formats s and i are not supported at this level.
+
+   This is how the elements of an array or structure are printed
+   with a format.  */
+
+void
+print_scalar_formatted (valaddr, type, format, size, stream)
+     char *valaddr;
+     struct type *type;
+     int format;
+     int size;
+     GDB_FILE *stream;
+{
+  LONGEST val_long;
+  unsigned int len = TYPE_LENGTH (type);
+
+  if (len > sizeof (LONGEST)
+      && (format == 't'
+	  || format == 'c'
+	  || format == 'o'
+	  || format == 'u'
+	  || format == 'd'
+	  || format == 'x'))
+    {
+      if (! TYPE_UNSIGNED (type)
+	  || ! extract_long_unsigned_integer (valaddr, len, &val_long))
+	{
+	  /* We can't print it normally, but we can print it in hex.
+	     Printing it in the wrong radix is more useful than saying
+	     "use /x, you dummy".  */
+	  /* FIXME:  we could also do octal or binary if that was the
+	     desired format.  */
+	  /* FIXME:  we should be using the size field to give us a
+	     minimum field width to print.  */
+
+          if( format == 'o' )
+              print_octal_chars (stream, valaddr, len);
+          else if( format == 'd' )
+              print_decimal_chars (stream, valaddr, len );
+          else if( format == 't' )
+              print_binary_chars (stream, valaddr, len);
+          else
+
+              /* replace with call to print_hex_chars? Looks
+                 like val_print_type_code_int is redoing
+                 work.  - edie */
+
+	      val_print_type_code_int (type, valaddr, stream);
+
+	  return;
+	}
+
+      /* If we get here, extract_long_unsigned_integer set val_long.  */
+    }
+  else if (format != 'f')
+    val_long = unpack_long (type, valaddr);
+
+  /* If we are printing it as unsigned, truncate it in case it is actually
+     a negative signed value (e.g. "print/u (short)-1" should print 65535
+     (if shorts are 16 bits) instead of 4294967295).  */
+  if (format != 'd')
+    {
+      if (len < sizeof (LONGEST))
+	val_long &= ((LONGEST) 1 << HOST_CHAR_BIT * len) - 1;
+    }
+
+  switch (format)
+    {
+    case 'x':
+      if (!size)
+	{
+	  /* no size specified, like in print.  Print varying # of digits. */
+	  print_longest (stream, 'x', 1, val_long);
+	}
+      else
+	switch (size)
+	  {
+	  case 'b':
+	  case 'h':
+	  case 'w':
+	  case 'g':
+	    print_longest (stream, size, 1, val_long);
+	    break;
+	  default:
+	    error ("Undefined output size \"%c\".", size);
+	  }
+      break;
+
+    case 'd':
+      print_longest (stream, 'd', 1, val_long);
+      break;
+
+    case 'u':
+      print_longest (stream, 'u', 0, val_long);
+      break;
+
+    case 'o':
+      if (val_long)
+	print_longest (stream, 'o', 1, val_long);
+      else
+	fprintf_filtered (stream, "0");
+      break;
+
+    case 'a':
+      print_address (unpack_pointer (type, valaddr), stream);
+      break;
+
+    case 'c':
+      value_print (value_from_longest (builtin_type_char, val_long), stream, 0,
+		   Val_pretty_default);
+      break;
+
+    case 'f':
+      if (len == sizeof (float))
+	type = builtin_type_float;
+      else if (len == sizeof (double))
+	type = builtin_type_double;
+      print_floating (valaddr, type, stream);
+      break;
+
+    case 0:
+      abort ();
+
+    case 't':
+      /* Binary; 't' stands for "two".  */
+      {
+        char bits[8*(sizeof val_long) + 1];
+        char buf[8*(sizeof val_long) + 32];
+	char *cp = bits;
+	int width;
+
+        if (!size)
+	  width = 8*(sizeof val_long);
+        else
+          switch (size)
+	    {
+	    case 'b':
+	      width = 8;
+	      break;
+	    case 'h':
+	      width = 16;
+	      break;
+	    case 'w':
+	      width = 32;
+	      break;
+	    case 'g':
+	      width = 64;
+	      break;
+	    default:
+	      error ("Undefined output size \"%c\".", size);
+	    }
+
+        bits[width] = '\0';
+        while (width-- > 0)
+          {
+            bits[width] = (val_long & 1) ? '1' : '0';
+            val_long >>= 1;
+          }
+	if (!size)
+	  {
+	    while (*cp && *cp == '0')
+	      cp++;
+	    if (*cp == '\0')
+	      cp--;
+	  }
+	strcpy (buf, local_binary_format_prefix());
+	strcat (buf, cp);
+	strcat (buf, local_binary_format_suffix());	
+        fprintf_filtered (stream, buf);
+      }
+      break;
+
+    default:
+      error ("Undefined output format \"%c\".", format);
+    }
+}
+
+/* Specify default address for `x' command.
+   `info lines' uses this.  */
+
+void
+set_next_address (addr)
+     CORE_ADDR addr;
+{
+  next_address = addr;
+
+  /* Make address available to the user as $_.  */
+  set_internalvar (lookup_internalvar ("_"),
+		   value_from_longest (lookup_pointer_type (builtin_type_void),
+				    (LONGEST) addr));
+}
+
+/* Optionally print address ADDR symbolically as <SYMBOL+OFFSET> on STREAM,
+   after LEADIN.  Print nothing if no symbolic name is found nearby.
+   Optionally also print source file and line number, if available.
+   DO_DEMANGLE controls whether to print a symbol in its native "raw" form,
+   or to interpret it as a possible C++ name and convert it back to source
+   form.  However note that DO_DEMANGLE can be overridden by the specific
+   settings of the demangle and asm_demangle variables.  */
+
+void
+print_address_symbolic (addr, stream, do_demangle, leadin)
+     CORE_ADDR addr;
+     GDB_FILE *stream;
+     int do_demangle;
+     char *leadin;
+{
+  struct minimal_symbol *msymbol;
+  struct symbol *symbol;
+  struct symtab *symtab = 0;
+  CORE_ADDR name_location = 0;
+  char *name = "";
+  asection *section = 0;
+  int unmapped = 0;
+
+  /* Determine if the address is in an overlay, and whether it is mapped. */
+  if (overlay_debugging)
+    {
+      section = find_pc_overlay (addr);
+      if (pc_in_unmapped_range (addr, section))
+	{
+	  unmapped = 1;
+	  addr = overlay_mapped_address (addr, section);
+	}
+    }
+
+  /* On some targets, add in extra "flag" bits to PC for
+     disassembly.  This should ensure that "rounding errors" in
+     symbol addresses that are masked for disassembly favour the
+     the correct symbol. */
+
+#ifdef GDB_TARGET_UNMASK_DISAS_PC
+  addr = GDB_TARGET_UNMASK_DISAS_PC (addr);
+#endif
+
+  /* First try to find the address in the symbol table, then
+     in the minsyms.  Take the closest one.  */
+
+  /* This is defective in the sense that it only finds text symbols.  So
+     really this is kind of pointless--we should make sure that the
+     minimal symbols have everything we need (by changing that we could
+     save some memory, but for many debug format--ELF/DWARF or
+     anything/stabs--it would be inconvenient to eliminate those minimal
+     symbols anyway).  */
+  msymbol = lookup_minimal_symbol_by_pc_section (addr, section);
+  symbol = find_pc_sect_function (addr, section);
+
+  if (symbol)
+    {
+      name_location = BLOCK_START (SYMBOL_BLOCK_VALUE (symbol));
+      if (do_demangle)
+	name = SYMBOL_SOURCE_NAME (symbol);
+      else
+	name = SYMBOL_LINKAGE_NAME (symbol);
+    }
+
+  if (msymbol != NULL)
+    {
+      if (SYMBOL_VALUE_ADDRESS (msymbol) > name_location || symbol == NULL)
+	{
+	  /* The msymbol is closer to the address than the symbol;
+	     use the msymbol instead.  */
+	  symbol = 0;
+	  symtab = 0;
+	  name_location = SYMBOL_VALUE_ADDRESS (msymbol);
+	  if (do_demangle)
+	    name = SYMBOL_SOURCE_NAME (msymbol);
+	  else
+	    name = SYMBOL_LINKAGE_NAME (msymbol);
+	}
+    }
+  if (symbol == NULL && msymbol == NULL)
+    return;
+
+  /* On some targets, mask out extra "flag" bits from PC for handsome
+     disassembly. */
+
+#ifdef GDB_TARGET_MASK_DISAS_PC
+  name_location = GDB_TARGET_MASK_DISAS_PC (name_location);
+  addr = GDB_TARGET_MASK_DISAS_PC (addr);
+#endif
+
+  /* If the nearest symbol is too far away, don't print anything symbolic.  */
+
+  /* For when CORE_ADDR is larger than unsigned int, we do math in
+     CORE_ADDR.  But when we detect unsigned wraparound in the
+     CORE_ADDR math, we ignore this test and print the offset,
+     because addr+max_symbolic_offset has wrapped through the end
+     of the address space back to the beginning, giving bogus comparison.  */
+  if (addr > name_location + max_symbolic_offset
+      && name_location + max_symbolic_offset > name_location)
+    return;
+
+  fputs_filtered (leadin, stream);
+  if (unmapped)
+    fputs_filtered ("<*", stream);
+  else
+    fputs_filtered ("<", stream);
+  fputs_filtered (name, stream);
+  if (addr != name_location)
+    fprintf_filtered (stream, "+%u", (unsigned int)(addr - name_location));
+
+  /* Append source filename and line number if desired.  Give specific
+     line # of this addr, if we have it; else line # of the nearest symbol.  */
+  if (print_symbol_filename)
+    {
+      struct symtab_and_line sal;
+
+      sal = find_pc_sect_line (addr, section, 0);
+
+      if (sal.symtab)
+	fprintf_filtered (stream, " at %s:%d", sal.symtab->filename, sal.line);
+      else if (symtab && symbol && symbol->line)
+	fprintf_filtered (stream, " at %s:%d", symtab->filename, symbol->line);
+      else if (symtab)
+	fprintf_filtered (stream, " in %s", symtab->filename);
+    }
+  if (unmapped)
+    fputs_filtered ("*>", stream);
+  else
+    fputs_filtered (">", stream);
+}
+
+
+/* Print address ADDR on STREAM.  USE_LOCAL means the same thing as for
+   print_longest.  */
+void
+print_address_numeric (addr, use_local, stream)
+     CORE_ADDR addr;
+     int use_local;
+     GDB_FILE *stream;
+{
+  /* This assumes a CORE_ADDR can fit in a LONGEST.  Probably a safe
+     assumption.  */
+  print_longest (stream, 'x', use_local, (ULONGEST) addr);
+}
+
+/* Print address ADDR symbolically on STREAM.
+   First print it as a number.  Then perhaps print
+   <SYMBOL + OFFSET> after the number.  */
+
+void
+print_address (addr, stream)
+     CORE_ADDR addr;
+     GDB_FILE *stream;
+{
+  print_address_numeric (addr, 1, stream);
+  print_address_symbolic (addr, stream, asm_demangle, " ");
+}
+
+/* Print address ADDR symbolically on STREAM.  Parameter DEMANGLE
+   controls whether to print the symbolic name "raw" or demangled.
+   Global setting "addressprint" controls whether to print hex address
+   or not.  */
+
+void
+print_address_demangle (addr, stream, do_demangle)
+     CORE_ADDR addr;
+     GDB_FILE *stream;
+     int do_demangle;
+{
+  if (addr == 0)
+    {
+      fprintf_filtered (stream, "0");
+    }
+  else if (addressprint)
+    {
+      print_address_numeric (addr, 1, stream);
+      print_address_symbolic (addr, stream, do_demangle, " ");
+    }
+  else
+    {
+      print_address_symbolic (addr, stream, do_demangle, "");
+    }
+}
+
+
+/* These are the types that $__ will get after an examine command of one
+   of these sizes.  */
+
+static struct type *examine_i_type;
+
+static struct type *examine_b_type;
+static struct type *examine_h_type;
+static struct type *examine_w_type;
+static struct type *examine_g_type;
+
+/* Examine data at address ADDR in format FMT.
+   Fetch it from memory and print on gdb_stdout.  */
+
+static void
+do_examine (fmt, addr, sect)
+     struct format_data fmt;
+     CORE_ADDR addr;
+     asection *sect;
+{
+  register char format = 0;
+  register char size;
+  register int count = 1;
+  struct type *val_type = NULL;
+  register int i;
+  register int maxelts;
+
+  format = fmt.format;
+  size = fmt.size;
+  count = fmt.count;
+  next_address = addr;
+  next_section = sect;
+
+  /* String or instruction format implies fetch single bytes
+     regardless of the specified size.  */
+  if (format == 's' || format == 'i')
+    size = 'b';
+
+  if (format == 'i')
+    val_type = examine_i_type;
+  else if (size == 'b')
+    val_type = examine_b_type;
+  else if (size == 'h')
+    val_type = examine_h_type;
+  else if (size == 'w')
+    val_type = examine_w_type;
+  else if (size == 'g')
+    val_type = examine_g_type;
+
+  maxelts = 8;
+  if (size == 'w')
+    maxelts = 4;
+  if (size == 'g')
+    maxelts = 2;
+  if (format == 's' || format == 'i')
+    maxelts = 1;
+
+  /* Print as many objects as specified in COUNT, at most maxelts per line,
+     with the address of the next one at the start of each line.  */
+
+  while (count > 0)
+    {
+      QUIT;
+      print_address (next_address, gdb_stdout);
+      printf_filtered (":");
+      for (i = maxelts;
+	   i > 0 && count > 0;
+	   i--, count--)
+	{
+	  printf_filtered ("\t");
+	  /* Note that print_formatted sets next_address for the next
+	     object.  */
+	  last_examine_address = next_address;
+
+	  if (last_examine_value)
+	    value_free (last_examine_value);
+
+	  /* The value to be displayed is not fetched greedily.
+             Instead, to avoid the posibility of a fetched value not
+             being used, its retreval is delayed until the print code
+             uses it.  When examining an instruction stream, the
+             disassembler will perform its own memory fetch using just
+             the address stored in LAST_EXAMINE_VALUE.  FIXME: Should
+             the disassembler be modified so that LAST_EXAMINE_VALUE
+             is left with the byte sequence from the last complete
+             instruction fetched from memory? */
+	  last_examine_value = value_at_lazy (val_type, next_address, sect);
+
+	  if (last_examine_value)
+	    release_value (last_examine_value);
+
+	  print_formatted (last_examine_value, format, size);
+	}
+      printf_filtered ("\n");
+      gdb_flush (gdb_stdout);
+    }
+}
+
+static void
+validate_format (fmt, cmdname)
+     struct format_data fmt;
+     char *cmdname;
+{
+  if (fmt.size != 0)
+    error ("Size letters are meaningless in \"%s\" command.", cmdname);
+  if (fmt.count != 1)
+    error ("Item count other than 1 is meaningless in \"%s\" command.",
+	   cmdname);
+  if (fmt.format == 'i' || fmt.format == 's')
+    error ("Format letter \"%c\" is meaningless in \"%s\" command.",
+	   fmt.format, cmdname);
+}
+
+/*  Evaluate string EXP as an expression in the current language and
+    print the resulting value.  EXP may contain a format specifier as the
+    first argument ("/x myvar" for example, to print myvar in hex).
+    */
+
+static void
+print_command_1 (exp, inspect, voidprint)
+     char *exp;
+     int inspect;
+     int voidprint;
+{
+  struct expression *expr;
+  register struct cleanup *old_chain = 0;
+  register char format = 0;
+  register value_ptr val;
+  struct format_data fmt;
+  int cleanup = 0;
+
+  /* Pass inspect flag to the rest of the print routines in a global (sigh). */
+  inspect_it = inspect;
+
+  if (exp && *exp == '/')
+    {
+      exp++;
+      fmt = decode_format (&exp, last_format, 0);
+      validate_format (fmt, "print");
+      last_format = format = fmt.format;
+    }
+  else
+    {
+      fmt.count = 1;
+      fmt.format = 0;
+      fmt.size = 0;
+    }
+
+  if (exp && *exp)
+    {
+      extern int objectprint;
+      struct type *type;
+      expr = parse_expression (exp);
+      old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                &expr);
+      cleanup = 1;
+      val = evaluate_expression (expr);
+
+      /* C++: figure out what type we actually want to print it as.  */
+      type = VALUE_TYPE (val);
+
+      if (objectprint
+	  && (   TYPE_CODE (type) == TYPE_CODE_PTR
+	      || TYPE_CODE (type) == TYPE_CODE_REF)
+	  && (   TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_STRUCT
+	      || TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_UNION))
+	{
+	  value_ptr v;
+
+	  v = value_from_vtable_info (val, TYPE_TARGET_TYPE (type));
+	  if (v != 0)
+	    {
+	      val = v;
+	      type = VALUE_TYPE (val);
+	    }
+	}
+    }
+  else
+    val = access_value_history (0);
+
+  if (voidprint || (val && VALUE_TYPE (val) &&
+                    TYPE_CODE (VALUE_TYPE (val)) != TYPE_CODE_VOID))
+    {
+      int histindex = record_latest_value (val);
+
+      if (histindex >= 0)
+	annotate_value_history_begin (histindex, VALUE_TYPE (val));
+      else
+	annotate_value_begin (VALUE_TYPE (val));
+
+      if (inspect)
+	printf_unfiltered ("\031(gdb-makebuffer \"%s\"  %d '(\"", exp, histindex);
+      else
+	if (histindex >= 0) printf_filtered ("$%d = ", histindex);
+
+      if (histindex >= 0)
+	annotate_value_history_value ();
+
+      print_formatted (val, format, fmt.size);
+      printf_filtered ("\n");
+
+      if (histindex >= 0)
+	annotate_value_history_end ();
+      else
+	annotate_value_end ();
+
+      if (inspect)
+	printf_unfiltered("\") )\030");
+    }
+
+  if (cleanup)
+    do_cleanups (old_chain);
+  inspect_it = 0;	/* Reset print routines to normal */
+}
+
+/* ARGSUSED */
+static void
+print_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  print_command_1 (exp, 0, 1);
+}
+
+/* Same as print, except in epoch, it gets its own window */
+/* ARGSUSED */
+static void
+inspect_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  extern int epoch_interface;
+
+  print_command_1 (exp, epoch_interface, 1);
+}
+
+/* Same as print, except it doesn't print void results. */
+/* ARGSUSED */
+static void
+call_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  print_command_1 (exp, 0, 0);
+}
+
+/* ARGSUSED */
+void
+output_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  struct expression *expr;
+  register struct cleanup *old_chain;
+  register char format = 0;
+  register value_ptr val;
+  struct format_data fmt;
+
+  if (exp && *exp == '/')
+    {
+      exp++;
+      fmt = decode_format (&exp, 0, 0);
+      validate_format (fmt, "output");
+      format = fmt.format;
+    }
+
+  expr = parse_expression (exp);
+  old_chain = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+  val = evaluate_expression (expr);
+
+  annotate_value_begin (VALUE_TYPE (val));
+
+  print_formatted (val, format, fmt.size);
+
+  annotate_value_end ();
+
+  do_cleanups (old_chain);
+}
+
+/* ARGSUSED */
+static void
+set_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  struct expression *expr = parse_expression (exp);
+  register struct cleanup *old_chain
+    = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+  evaluate_expression (expr);
+  do_cleanups (old_chain);
+}
+
+/* ARGSUSED */
+static void
+sym_info (arg, from_tty)
+     char *arg;
+     int   from_tty;
+{
+  struct minimal_symbol *msymbol;
+  struct objfile        *objfile;
+  struct obj_section    *osect;
+  asection              *sect;
+  CORE_ADDR              addr, sect_addr;
+  int                    matches = 0;
+  unsigned int           offset;
+
+  if (!arg)
+    error_no_arg ("address");
+
+  addr = parse_and_eval_address (arg);
+  ALL_OBJSECTIONS (objfile, osect)
+    {
+      sect = osect->the_bfd_section;
+      sect_addr = overlay_mapped_address (addr, sect);
+
+      if (osect->addr <= sect_addr && sect_addr < osect->endaddr &&
+	  (msymbol = lookup_minimal_symbol_by_pc_section (sect_addr, sect)))
+	{
+	  matches = 1;
+	  offset = sect_addr - SYMBOL_VALUE_ADDRESS (msymbol);
+	  if (offset)
+	    printf_filtered ("%s + %u in ", 
+			     SYMBOL_SOURCE_NAME (msymbol), offset);
+	  else
+	    printf_filtered ("%s in ", 
+			     SYMBOL_SOURCE_NAME (msymbol));
+	  if (pc_in_unmapped_range (addr, sect))
+	    printf_filtered ("load address range of ");
+	  if (section_is_overlay (sect))
+	    printf_filtered ("%s overlay ", 
+			     section_is_mapped (sect) ? "mapped" : "unmapped");
+	  printf_filtered ("section %s", sect->name);
+	  printf_filtered ("\n");
+	}
+    }
+  if (matches == 0)
+    printf_filtered ("No symbol matches %s.\n", arg);
+}
+
+/* ARGSUSED */
+static void
+address_info (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  register struct symbol *sym;
+  register struct minimal_symbol *msymbol;
+  register long val;
+  register long basereg;
+  asection *section;
+  CORE_ADDR load_addr;
+  int is_a_field_of_this;	/* C++: lookup_symbol sets this to nonzero
+				   if exp is a field of `this'. */
+
+  if (exp == 0)
+    error ("Argument required.");
+
+  sym = lookup_symbol (exp, get_selected_block (), VAR_NAMESPACE, 
+		       &is_a_field_of_this, (struct symtab **)NULL);
+  if (sym == NULL)
+    {
+      if (is_a_field_of_this)
+	{
+	  printf_filtered ("Symbol \"");
+	  fprintf_symbol_filtered (gdb_stdout, exp,
+				   current_language->la_language, DMGL_ANSI);
+	  printf_filtered ("\" is a field of the local class variable `this'\n");
+	  return;
+	}
+
+      msymbol = lookup_minimal_symbol (exp, NULL, NULL);
+
+      if (msymbol != NULL)
+	{
+	  load_addr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+	  printf_filtered ("Symbol \"");
+	  fprintf_symbol_filtered (gdb_stdout, exp,
+				   current_language->la_language, DMGL_ANSI);
+	  printf_filtered ("\" is at ");
+	  print_address_numeric (load_addr, 1, gdb_stdout);
+	  printf_filtered (" in a file compiled without debugging");
+	  section = SYMBOL_BFD_SECTION (msymbol);
+	  if (section_is_overlay (section))
+	    {
+	      load_addr = overlay_unmapped_address (load_addr, section);
+	      printf_filtered (",\n -- loaded at ");
+	      print_address_numeric (load_addr, 1, gdb_stdout);
+	      printf_filtered (" in overlay section %s", section->name);
+	    }
+	  printf_filtered (".\n");
+	}
+      else
+	error ("No symbol \"%s\" in current context.", exp);
+      return;
+    }
+
+  printf_filtered ("Symbol \"");
+  fprintf_symbol_filtered (gdb_stdout, SYMBOL_NAME (sym),
+			   current_language->la_language, DMGL_ANSI);
+  printf_filtered ("\" is ");
+  val     = SYMBOL_VALUE (sym);
+  basereg = SYMBOL_BASEREG (sym);
+  section = SYMBOL_BFD_SECTION (sym);
+
+  switch (SYMBOL_CLASS (sym))
+    {
+    case LOC_CONST:
+    case LOC_CONST_BYTES:
+      printf_filtered ("constant");
+      break;
+
+    case LOC_LABEL:
+      printf_filtered ("a label at address ");
+      print_address_numeric (load_addr = SYMBOL_VALUE_ADDRESS (sym), 
+			     1, gdb_stdout);
+      if (section_is_overlay (section))
+	{
+	  load_addr = overlay_unmapped_address (load_addr, section);
+	  printf_filtered (",\n -- loaded at ");
+	  print_address_numeric (load_addr, 1, gdb_stdout);
+	  printf_filtered (" in overlay section %s", section->name);
+	}
+      break;
+
+    case LOC_REGISTER:
+      printf_filtered ("a variable in register %s", REGISTER_NAME (val));
+      break;
+
+    case LOC_STATIC:
+      printf_filtered ("static storage at address ");
+      print_address_numeric (load_addr = SYMBOL_VALUE_ADDRESS (sym), 
+			     1, gdb_stdout);
+      if (section_is_overlay (section))
+	{
+	  load_addr = overlay_unmapped_address (load_addr, section);
+	  printf_filtered (",\n -- loaded at ");
+	  print_address_numeric (load_addr, 1, gdb_stdout);
+	  printf_filtered (" in overlay section %s", section->name);
+	}
+      break;
+
+    case LOC_INDIRECT:
+      printf_filtered ("external global (indirect addressing), at address *(");
+      print_address_numeric (load_addr = SYMBOL_VALUE_ADDRESS (sym),
+			     1, gdb_stdout);
+      printf_filtered (")");
+      if (section_is_overlay (section))
+	{
+	  load_addr = overlay_unmapped_address (load_addr, section);
+	  printf_filtered (",\n -- loaded at ");
+	  print_address_numeric (load_addr, 1, gdb_stdout);
+	  printf_filtered (" in overlay section %s", section->name);
+	}
+      break;
+
+    case LOC_REGPARM:
+      printf_filtered ("an argument in register %s", REGISTER_NAME (val));
+      break;
+
+    case LOC_REGPARM_ADDR:
+      printf_filtered ("address of an argument in register %s", REGISTER_NAME (val));
+      break;
+
+    case LOC_ARG:
+      printf_filtered ("an argument at offset %ld", val);
+      break;
+
+    case LOC_LOCAL_ARG:
+      printf_filtered ("an argument at frame offset %ld", val);
+      break;
+
+    case LOC_LOCAL:
+      printf_filtered ("a local variable at frame offset %ld", val);
+      break;
+
+    case LOC_REF_ARG:
+      printf_filtered ("a reference argument at offset %ld", val);
+      break;
+
+    case LOC_BASEREG:
+      printf_filtered ("a variable at offset %ld from register %s",
+	      val, REGISTER_NAME (basereg));
+      break;
+
+    case LOC_BASEREG_ARG:
+      printf_filtered ("an argument at offset %ld from register %s",
+	      val, REGISTER_NAME (basereg));
+      break;
+
+    case LOC_TYPEDEF:
+      printf_filtered ("a typedef");
+      break;
+
+    case LOC_BLOCK:
+      printf_filtered ("a function at address ");
+#ifdef GDB_TARGET_MASK_DISAS_PC
+      print_address_numeric
+	(load_addr= GDB_TARGET_MASK_DISAS_PC (BLOCK_START (SYMBOL_BLOCK_VALUE (sym))),
+	 1, gdb_stdout);
+#else
+      print_address_numeric (load_addr=BLOCK_START (SYMBOL_BLOCK_VALUE (sym)),
+			     1, gdb_stdout);
+#endif
+      if (section_is_overlay (section))
+	{
+	  load_addr = overlay_unmapped_address (load_addr, section);
+	  printf_filtered (",\n -- loaded at ");
+	  print_address_numeric (load_addr, 1, gdb_stdout);
+	  printf_filtered (" in overlay section %s", section->name);
+	}
+      break;
+
+    case LOC_UNRESOLVED:
+      {
+	struct minimal_symbol *msym;
+
+	msym = lookup_minimal_symbol (SYMBOL_NAME (sym), NULL, NULL);
+	if (msym == NULL)
+	  printf_filtered ("unresolved");
+	else
+	  {
+	    section = SYMBOL_BFD_SECTION (msym);
+	    printf_filtered ("static storage at address ");
+	    print_address_numeric (load_addr = SYMBOL_VALUE_ADDRESS (msym), 
+				   1, gdb_stdout);
+	    if (section_is_overlay (section))
+	      {
+		load_addr = overlay_unmapped_address (load_addr, section);
+		printf_filtered (",\n -- loaded at ");
+		print_address_numeric (load_addr, 1, gdb_stdout);
+		printf_filtered (" in overlay section %s", section->name);
+	      }
+	  }
+      }
+      break;
+
+    case LOC_THREAD_LOCAL_STATIC:
+      printf_filtered (
+              "a thread-local variable at offset %ld from the thread base register %s",
+	      val, REGISTER_NAME (basereg));
+      break;
+
+    case LOC_OPTIMIZED_OUT:
+      printf_filtered ("optimized out");
+      break;
+      
+    default:
+      printf_filtered ("of unknown (botched) type");
+      break;
+    }
+  printf_filtered (".\n");
+}
+
+void
+x_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  struct expression *expr;
+  struct format_data fmt;
+  struct cleanup *old_chain;
+  struct value *val;
+
+  fmt.format = last_format;
+  fmt.size = last_size;
+  fmt.count = 1;
+
+  if (exp && *exp == '/')
+    {
+      exp++;
+      fmt = decode_format (&exp, last_format, last_size);
+    }
+
+  /* If we have an expression, evaluate it and use it as the address.  */
+
+  if (exp != 0 && *exp != 0)
+    {
+      expr = parse_expression (exp);
+      /* Cause expression not to be there any more
+	 if this command is repeated with Newline.
+	 But don't clobber a user-defined command's definition.  */
+      if (from_tty)
+	*exp = 0;
+      old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                &expr);
+      val = evaluate_expression (expr);
+      if (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_REF)
+	val = value_ind (val);
+      /* In rvalue contexts, such as this, functions are coerced into
+	 pointers to functions.  This makes "x/i main" work.  */
+      if (/* last_format == 'i'
+	  && */ TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_FUNC
+	  && VALUE_LVAL (val) == lval_memory)
+	next_address = VALUE_ADDRESS (val);
+      else
+	next_address = value_as_pointer (val);
+      if (VALUE_BFD_SECTION (val))
+	next_section = VALUE_BFD_SECTION (val);
+      do_cleanups (old_chain);
+    }
+
+  do_examine (fmt, next_address, next_section);
+
+  /* If the examine succeeds, we remember its size and format for next time.  */
+  last_size = fmt.size;
+  last_format = fmt.format;
+
+  /* Set a couple of internal variables if appropriate. */
+  if (last_examine_value)
+    {
+      /* Make last address examined available to the user as $_.  Use
+	 the correct pointer type.  */
+      set_internalvar (lookup_internalvar ("_"),
+	       value_from_longest (
+		 lookup_pointer_type (VALUE_TYPE (last_examine_value)),
+				   (LONGEST) last_examine_address));
+      
+      /* Make contents of last address examined available to the user as $__.*/
+      /* If the last value has not been fetched from memory then don't
+         fetch it now - instead mark it by voiding the $__ variable. */
+      if (VALUE_LAZY (last_examine_value))
+	set_internalvar (lookup_internalvar ("__"),
+			 allocate_value (builtin_type_void));
+      else
+	set_internalvar (lookup_internalvar ("__"), last_examine_value);
+    }
+}
+
+
+/* Add an expression to the auto-display chain.
+   Specify the expression.  */
+
+static void
+display_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  struct format_data fmt;
+  register struct expression *expr;
+  register struct display *new;
+  int display_it = 1;
+
+#if defined(TUI)
+  if (tui_version && *exp == '$')
+    display_it = ((TuiStatus)tuiDo(
+		  (TuiOpaqueFuncPtr)tui_vSetLayoutTo, exp) == TUI_FAILURE);
+#endif
+
+  if (display_it)
+    {
+      if (exp == 0)
+	{
+	  do_displays ();
+	  return;
+	}
+
+      if (*exp == '/')
+	{
+	  exp++;
+	  fmt = decode_format (&exp, 0, 0);
+	  if (fmt.size && fmt.format == 0)
+	    fmt.format = 'x';
+	  if (fmt.format == 'i' || fmt.format == 's')
+	    fmt.size = 'b';
+	}
+      else
+	{
+	  fmt.format = 0;
+	  fmt.size = 0;
+	  fmt.count = 0;
+	}
+
+      innermost_block = 0;
+      expr = parse_expression (exp);
+
+      new = (struct display *) xmalloc (sizeof (struct display));
+
+      new->exp = expr;
+      new->block = innermost_block;
+      new->next = display_chain;
+      new->number = ++display_number;
+      new->format = fmt;
+      new->status = enabled;
+      display_chain = new;
+
+      if (from_tty && target_has_execution)
+	do_one_display (new);
+
+      dont_repeat ();
+    }
+}
+
+static void
+free_display (d)
+     struct display *d;
+{
+  free ((PTR)d->exp);
+  free ((PTR)d);
+}
+
+/* Clear out the display_chain.
+   Done when new symtabs are loaded, since this invalidates
+   the types stored in many expressions.  */
+
+void
+clear_displays ()
+{
+  register struct display *d;
+
+  while ((d = display_chain) != NULL)
+    {
+      free ((PTR)d->exp);
+      display_chain = d->next;
+      free ((PTR)d);
+    }
+}
+
+/* Delete the auto-display number NUM.  */
+
+static void
+delete_display (num)
+     int num;
+{
+  register struct display *d1, *d;
+
+  if (!display_chain)
+    error ("No display number %d.", num);
+
+  if (display_chain->number == num)
+    {
+      d1 = display_chain;
+      display_chain = d1->next;
+      free_display (d1);
+    }
+  else
+    for (d = display_chain; ; d = d->next)
+      {
+	if (d->next == 0)
+	  error ("No display number %d.", num);
+	if (d->next->number == num)
+	  {
+	    d1 = d->next;
+	    d->next = d1->next;
+	    free_display (d1);
+	    break;
+	  }
+      }
+}
+
+/* Delete some values from the auto-display chain.
+   Specify the element numbers.  */
+
+static void
+undisplay_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  register char *p = args;
+  register char *p1;
+  register int num;
+
+  if (args == 0)
+    {
+      if (query ("Delete all auto-display expressions? "))
+	clear_displays ();
+      dont_repeat ();
+      return;
+    }
+
+  while (*p)
+    {
+      p1 = p;
+      while (*p1 >= '0' && *p1 <= '9') p1++;
+      if (*p1 && *p1 != ' ' && *p1 != '\t')
+	error ("Arguments must be display numbers.");
+
+      num = atoi (p);
+
+      delete_display (num);
+
+      p = p1;
+      while (*p == ' ' || *p == '\t') p++;
+    }
+  dont_repeat ();
+}
+
+/* Display a single auto-display.  
+   Do nothing if the display cannot be printed in the current context,
+   or if the display is disabled. */
+
+static void
+do_one_display (d)
+     struct display *d;
+{
+  int within_current_scope;
+
+  if (d->status == disabled)
+    return;
+
+  if (d->block)
+    within_current_scope = contained_in (get_selected_block (), d->block);
+  else
+    within_current_scope = 1;
+  if (!within_current_scope)
+    return;
+
+  current_display_number = d->number;
+
+  annotate_display_begin ();
+  printf_filtered ("%d", d->number);
+  annotate_display_number_end ();
+  printf_filtered (": ");
+  if (d->format.size)
+    {
+      CORE_ADDR addr;
+      value_ptr val;
+
+      annotate_display_format ();
+
+      printf_filtered ("x/");
+      if (d->format.count != 1)
+	printf_filtered ("%d", d->format.count);
+      printf_filtered ("%c", d->format.format);
+      if (d->format.format != 'i' && d->format.format != 's')
+	printf_filtered ("%c", d->format.size);
+      printf_filtered (" ");
+
+      annotate_display_expression ();
+
+      print_expression (d->exp, gdb_stdout);
+      annotate_display_expression_end ();
+
+      if (d->format.count != 1)
+	printf_filtered ("\n");
+      else
+	printf_filtered ("  ");
+      
+      val = evaluate_expression (d->exp);
+      addr = value_as_pointer (val);
+      if (d->format.format == 'i')
+	addr = ADDR_BITS_REMOVE (addr);
+
+      annotate_display_value ();
+
+      do_examine (d->format, addr, VALUE_BFD_SECTION (val));
+    }
+  else
+    {
+      annotate_display_format ();
+
+      if (d->format.format)
+	printf_filtered ("/%c ", d->format.format);
+
+      annotate_display_expression ();
+
+      print_expression (d->exp, gdb_stdout);
+      annotate_display_expression_end ();
+
+      printf_filtered (" = ");
+
+      annotate_display_expression ();
+
+      print_formatted (evaluate_expression (d->exp),
+		       d->format.format, d->format.size);
+      printf_filtered ("\n");
+    }
+
+  annotate_display_end ();
+
+  gdb_flush (gdb_stdout);
+  current_display_number = -1;
+}
+
+/* Display all of the values on the auto-display chain which can be
+   evaluated in the current scope.  */
+
+void
+do_displays ()
+{
+  register struct display *d;
+
+  for (d = display_chain; d; d = d->next)
+    do_one_display (d);
+}
+
+/* Delete the auto-display which we were in the process of displaying.
+   This is done when there is an error or a signal.  */
+
+void
+disable_display (num)
+     int num;
+{
+  register struct display *d;
+
+  for (d = display_chain; d; d = d->next)
+    if (d->number == num)
+      {
+	d->status = disabled;
+	return;
+      }
+  printf_unfiltered ("No display number %d.\n", num);
+}
+  
+void
+disable_current_display ()
+{
+  if (current_display_number >= 0)
+    {
+      disable_display (current_display_number);
+      fprintf_unfiltered (gdb_stderr, "Disabling display %d to avoid infinite recursion.\n",
+	       current_display_number);
+    }
+  current_display_number = -1;
+}
+
+static void
+display_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct display *d;
+
+  if (!display_chain)
+    printf_unfiltered ("There are no auto-display expressions now.\n");
+  else
+      printf_filtered ("Auto-display expressions now in effect:\n\
+Num Enb Expression\n");
+
+  for (d = display_chain; d; d = d->next)
+    {
+      printf_filtered ("%d:   %c  ", d->number, "ny"[(int)d->status]);
+      if (d->format.size)
+	printf_filtered ("/%d%c%c ", d->format.count, d->format.size,
+		d->format.format);
+      else if (d->format.format)
+	printf_filtered ("/%c ", d->format.format);
+      print_expression (d->exp, gdb_stdout);
+      if (d->block && !contained_in (get_selected_block (), d->block))
+	printf_filtered (" (cannot be evaluated in the current context)");
+      printf_filtered ("\n");
+      gdb_flush (gdb_stdout);
+    }
+}
+
+static void
+enable_display (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  register char *p = args;
+  register char *p1;
+  register int num;
+  register struct display *d;
+
+  if (p == 0)
+    {
+      for (d = display_chain; d; d = d->next)
+	d->status = enabled;
+    }
+  else
+    while (*p)
+      {
+	p1 = p;
+	while (*p1 >= '0' && *p1 <= '9')
+	  p1++;
+	if (*p1 && *p1 != ' ' && *p1 != '\t')
+	  error ("Arguments must be display numbers.");
+	
+	num = atoi (p);
+	
+	for (d = display_chain; d; d = d->next)
+	  if (d->number == num)
+	    {
+	      d->status = enabled;
+	      goto win;
+	    }
+	printf_unfiltered ("No display number %d.\n", num);
+      win:
+	p = p1;
+	while (*p == ' ' || *p == '\t')
+	  p++;
+      }
+}
+
+/* ARGSUSED */
+static void
+disable_display_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  register char *p = args;
+  register char *p1;
+  register struct display *d;
+
+  if (p == 0)
+    {
+      for (d = display_chain; d; d = d->next)
+	d->status = disabled;
+    }
+  else
+    while (*p)
+      {
+	p1 = p;
+	while (*p1 >= '0' && *p1 <= '9')
+	  p1++;
+	if (*p1 && *p1 != ' ' && *p1 != '\t')
+	  error ("Arguments must be display numbers.");
+	
+	disable_display (atoi (p));
+
+	p = p1;
+	while (*p == ' ' || *p == '\t')
+	  p++;
+      }
+}
+
+
+/* Print the value in stack frame FRAME of a variable
+   specified by a struct symbol.  */
+
+void
+print_variable_value (var, frame, stream)
+     struct symbol *var;
+     struct frame_info *frame;
+     GDB_FILE *stream;
+{
+  value_ptr val = read_var_value (var, frame);
+
+  value_print (val, stream, 0, Val_pretty_default);
+}
+
+/* Print the arguments of a stack frame, given the function FUNC
+   running in that frame (as a symbol), the info on the frame,
+   and the number of args according to the stack frame (or -1 if unknown).  */
+
+/* References here and elsewhere to "number of args according to the
+   stack frame" appear in all cases to refer to "number of ints of args
+   according to the stack frame".  At least for VAX, i386, isi.  */
+
+void
+print_frame_args (func, fi, num, stream)
+     struct symbol *func;
+     struct frame_info *fi;
+     int num;
+     GDB_FILE *stream;
+{
+  struct block *b = NULL;
+  int nsyms = 0;
+  int first = 1;
+  register int i;
+  register struct symbol *sym;
+  register value_ptr val;
+  /* Offset of next stack argument beyond the one we have seen that is
+     at the highest offset.
+     -1 if we haven't come to a stack argument yet.  */
+  long highest_offset = -1;
+  int arg_size;
+  /* Number of ints of arguments that we have printed so far.  */
+  int args_printed = 0;
+
+  if (func)
+    {
+      b = SYMBOL_BLOCK_VALUE (func);
+      nsyms = BLOCK_NSYMS (b);
+    }
+
+  for (i = 0; i < nsyms; i++)
+    {
+      QUIT;
+      sym = BLOCK_SYM (b, i);
+
+      /* Keep track of the highest stack argument offset seen, and
+	 skip over any kinds of symbols we don't care about.  */
+
+      switch (SYMBOL_CLASS (sym)) {
+      case LOC_ARG:
+      case LOC_REF_ARG:
+	{
+	  long current_offset = SYMBOL_VALUE (sym);
+	  arg_size = TYPE_LENGTH (SYMBOL_TYPE (sym));
+	  
+	  /* Compute address of next argument by adding the size of
+	     this argument and rounding to an int boundary.  */
+	  current_offset
+	    = ((current_offset + arg_size + sizeof (int) - 1)
+	       & ~(sizeof (int) - 1));
+
+	  /* If this is the highest offset seen yet, set highest_offset.  */
+	  if (highest_offset == -1
+	      || (current_offset > highest_offset))
+	    highest_offset = current_offset;
+
+	  /* Add the number of ints we're about to print to args_printed.  */
+	  args_printed += (arg_size + sizeof (int) - 1) / sizeof (int);
+	}
+
+      /* We care about types of symbols, but don't need to keep track of
+	 stack offsets in them.  */
+      case LOC_REGPARM:
+      case LOC_REGPARM_ADDR:
+      case LOC_LOCAL_ARG:
+      case LOC_BASEREG_ARG:
+	break;
+
+      /* Other types of symbols we just skip over.  */
+      default:
+	continue;
+      }
+
+      /* We have to look up the symbol because arguments can have
+	 two entries (one a parameter, one a local) and the one we
+	 want is the local, which lookup_symbol will find for us.
+	 This includes gcc1 (not gcc2) on the sparc when passing a
+	 small structure and gcc2 when the argument type is float
+	 and it is passed as a double and converted to float by
+	 the prologue (in the latter case the type of the LOC_ARG
+	 symbol is double and the type of the LOC_LOCAL symbol is
+	 float).  */
+      /* But if the parameter name is null, don't try it.
+	 Null parameter names occur on the RS/6000, for traceback tables.
+	 FIXME, should we even print them?  */
+
+      if (*SYMBOL_NAME (sym))
+	{
+	  struct symbol *nsym;
+	  nsym = lookup_symbol
+	    (SYMBOL_NAME (sym),
+	     b, VAR_NAMESPACE, (int *)NULL, (struct symtab **)NULL);
+	  if (SYMBOL_CLASS (nsym) == LOC_REGISTER)
+	    {
+	      /* There is a LOC_ARG/LOC_REGISTER pair.  This means that
+		 it was passed on the stack and loaded into a register,
+		 or passed in a register and stored in a stack slot.
+		 GDB 3.x used the LOC_ARG; GDB 4.0-4.11 used the LOC_REGISTER.
+
+		 Reasons for using the LOC_ARG:
+		 (1) because find_saved_registers may be slow for remote
+		 debugging,
+		 (2) because registers are often re-used and stack slots
+		 rarely (never?) are.  Therefore using the stack slot is
+		 much less likely to print garbage.
+
+		 Reasons why we might want to use the LOC_REGISTER:
+		 (1) So that the backtrace prints the same value as
+		 "print foo".  I see no compelling reason why this needs
+		 to be the case; having the backtrace print the value which
+		 was passed in, and "print foo" print the value as modified
+		 within the called function, makes perfect sense to me.
+
+		 Additional note:  It might be nice if "info args" displayed
+		 both values.
+		 One more note:  There is a case with sparc structure passing
+		 where we need to use the LOC_REGISTER, but this is dealt with
+		 by creating a single LOC_REGPARM in symbol reading.  */
+
+	      /* Leave sym (the LOC_ARG) alone.  */
+	      ;
+	    }
+	  else
+	    sym = nsym;
+	}
+
+      /* Print the current arg.  */
+      if (! first)
+	fprintf_filtered (stream, ", ");
+      wrap_here ("    ");
+
+      annotate_arg_begin ();
+
+      fprintf_symbol_filtered (stream, SYMBOL_SOURCE_NAME (sym),
+			       SYMBOL_LANGUAGE (sym), DMGL_PARAMS | DMGL_ANSI);
+      annotate_arg_name_end ();
+      fputs_filtered ("=", stream);
+
+      /* Avoid value_print because it will deref ref parameters.  We just
+	 want to print their addresses.  Print ??? for args whose address
+	 we do not know.  We pass 2 as "recurse" to val_print because our
+	 standard indentation here is 4 spaces, and val_print indents
+	 2 for each recurse.  */
+      val = read_var_value (sym, fi);
+
+      annotate_arg_value (val == NULL ? NULL : VALUE_TYPE (val));
+
+      if (val)
+	{
+#ifdef GDB_TARGET_IS_D10V
+	  if (SYMBOL_CLASS(sym) == LOC_REGPARM && TYPE_CODE(VALUE_TYPE(val)) == TYPE_CODE_PTR)
+	    TYPE_LENGTH(VALUE_TYPE(val)) = 2;
+#endif
+	  val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), 0,
+	             VALUE_ADDRESS (val),
+                   stream, 0, 0, 2, Val_no_prettyprint);
+	}
+      else
+	fputs_filtered ("???", stream);
+
+      annotate_arg_end ();
+
+      first = 0;
+    }
+
+  /* Don't print nameless args in situations where we don't know
+     enough about the stack to find them.  */
+  if (num != -1)
+    {
+      long start;
+
+      if (highest_offset == -1)
+	start = FRAME_ARGS_SKIP;
+      else
+	start = highest_offset;
+
+      print_frame_nameless_args (fi, start, num - args_printed,
+				 first, stream);
+    }
+}
+
+/* Print nameless args on STREAM.
+   FI is the frameinfo for this frame, START is the offset
+   of the first nameless arg, and NUM is the number of nameless args to
+   print.  FIRST is nonzero if this is the first argument (not just
+   the first nameless arg).  */
+
+static void
+print_frame_nameless_args (fi, start, num, first, stream)
+     struct frame_info *fi;
+     long start;
+     int num;
+     int first;
+     GDB_FILE *stream;
+{
+  int i;
+  CORE_ADDR argsaddr;
+  long arg_value;
+
+  for (i = 0; i < num; i++)
+    {
+      QUIT;
+#ifdef NAMELESS_ARG_VALUE
+      NAMELESS_ARG_VALUE (fi, start, &arg_value);
+#else
+      argsaddr = FRAME_ARGS_ADDRESS (fi);
+      if (!argsaddr)
+	return;
+
+      arg_value = read_memory_integer (argsaddr + start, sizeof (int));
+#endif
+
+      if (!first)
+	fprintf_filtered (stream, ", ");
+
+#ifdef	PRINT_NAMELESS_INTEGER
+      PRINT_NAMELESS_INTEGER (stream, arg_value);
+#else
+#ifdef PRINT_TYPELESS_INTEGER
+      PRINT_TYPELESS_INTEGER (stream, builtin_type_int, (LONGEST) arg_value);
+#else
+      fprintf_filtered (stream, "%ld", arg_value);
+#endif /* PRINT_TYPELESS_INTEGER */
+#endif /* PRINT_NAMELESS_INTEGER */
+      first = 0;
+      start += sizeof (int);
+    }
+}
+
+/* ARGSUSED */
+static void
+printf_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  register char *f = NULL;
+  register char *s = arg;
+  char *string = NULL;
+  value_ptr *val_args;
+  char *substrings;
+  char *current_substring;
+  int nargs = 0;
+  int allocated_args = 20;
+  struct cleanup *old_cleanups;
+
+  val_args = (value_ptr *) xmalloc (allocated_args * sizeof (value_ptr));
+  old_cleanups = make_cleanup ((make_cleanup_func) free_current_contents, 
+                               &val_args);
+
+  if (s == 0)
+    error_no_arg ("format-control string and values to print");
+
+  /* Skip white space before format string */
+  while (*s == ' ' || *s == '\t') s++;
+
+  /* A format string should follow, enveloped in double quotes */
+  if (*s++ != '"')
+    error ("Bad format string, missing '\"'.");
+
+  /* Parse the format-control string and copy it into the string STRING,
+     processing some kinds of escape sequence.  */
+
+  f = string = (char *) alloca (strlen (s) + 1);
+
+  while (*s != '"')
+    {
+      int c = *s++;
+      switch (c)
+	{
+	case '\0':
+	  error ("Bad format string, non-terminated '\"'.");
+
+	case '\\':
+	  switch (c = *s++)
+	    {
+	    case '\\':
+	      *f++ = '\\';
+	      break;
+	    case 'a':
+#ifdef __STDC__
+	      *f++ = '\a';
+#else
+	      *f++ = '\007';  /* Bell */
+#endif
+	      break;
+	    case 'b':
+	      *f++ = '\b';
+	      break;
+	    case 'f':
+	      *f++ = '\f';
+	      break;
+	    case 'n':
+	      *f++ = '\n';
+	      break;
+	    case 'r':
+	      *f++ = '\r';
+	      break;
+	    case 't':
+	      *f++ = '\t';
+	      break;
+	    case 'v':
+	      *f++ = '\v';
+	      break;
+	    case '"':
+	      *f++ = '"';
+	      break;
+	    default:
+	      /* ??? TODO: handle other escape sequences */
+	      error ("Unrecognized escape character \\%c in format string.",
+		     c);
+	    }
+	  break;
+
+	default:
+	  *f++ = c;
+	}
+    }
+
+  /* Skip over " and following space and comma.  */
+  s++;
+  *f++ = '\0';
+  while (*s == ' ' || *s == '\t') s++;
+
+  if (*s != ',' && *s != 0)
+    error ("Invalid argument syntax");
+
+  if (*s == ',') s++;
+  while (*s == ' ' || *s == '\t') s++;
+
+  /* Need extra space for the '\0's.  Doubling the size is sufficient.  */
+  substrings = alloca (strlen (string) * 2);
+  current_substring = substrings;
+
+  {
+    /* Now scan the string for %-specs and see what kinds of args they want.
+       argclass[I] classifies the %-specs so we can give printf_filtered
+       something of the right size.  */
+
+    enum argclass {no_arg, int_arg, string_arg, double_arg, long_long_arg};
+    enum argclass *argclass;
+    enum argclass this_argclass;
+    char *last_arg;
+    int nargs_wanted;
+    int lcount;
+    int i;
+
+    argclass = (enum argclass *) alloca (strlen (s) * sizeof *argclass);
+    nargs_wanted = 0;
+    f = string;
+    last_arg = string;
+    while (*f)
+      if (*f++ == '%')
+	{
+	  lcount = 0;
+	  while (strchr ("0123456789.hlL-+ #", *f)) 
+	    {
+	      if (*f == 'l' || *f == 'L')
+		lcount++;
+	      f++;
+	    }
+	  switch (*f)
+	    {
+	    case 's':
+	      this_argclass = string_arg;
+	      break;
+
+	    case 'e':
+	    case 'f':
+	    case 'g':
+	      this_argclass = double_arg;
+	      break;
+
+	    case '*':
+	      error ("`*' not supported for precision or width in printf");
+
+	    case 'n':
+	      error ("Format specifier `n' not supported in printf");
+
+	    case '%':
+	      this_argclass = no_arg;
+	      break;
+
+	    default:
+	      if (lcount > 1)
+		this_argclass = long_long_arg;
+	      else
+		this_argclass = int_arg;
+	      break;
+	    }
+	  f++;
+	  if (this_argclass != no_arg)
+	    {
+	      strncpy (current_substring, last_arg, f - last_arg);
+	      current_substring += f - last_arg;
+	      *current_substring++ = '\0';
+	      last_arg = f;
+	      argclass[nargs_wanted++] = this_argclass;
+	    }
+	}
+
+    /* Now, parse all arguments and evaluate them.
+       Store the VALUEs in VAL_ARGS.  */
+
+    while (*s != '\0')
+      {
+	char *s1;
+	if (nargs == allocated_args)
+	  val_args = (value_ptr *) xrealloc ((char *) val_args,
+					     (allocated_args *= 2)
+					     * sizeof (value_ptr));
+	s1 = s;
+	val_args[nargs] = parse_to_comma_and_eval (&s1);
+ 
+	/* If format string wants a float, unchecked-convert the value to
+	   floating point of the same size */
+ 
+	if (argclass[nargs] == double_arg)
+	  {
+	    struct type *type = VALUE_TYPE (val_args[nargs]);
+	    if (TYPE_LENGTH (type) == sizeof (float))
+	      VALUE_TYPE (val_args[nargs]) = builtin_type_float;
+	    if (TYPE_LENGTH (type) == sizeof (double))
+	      VALUE_TYPE (val_args[nargs]) = builtin_type_double;
+	  }
+	nargs++;
+	s = s1;
+	if (*s == ',')
+	  s++;
+      }
+ 
+    if (nargs != nargs_wanted)
+      error ("Wrong number of arguments for specified format-string");
+
+    /* Now actually print them.  */
+    current_substring = substrings;
+    for (i = 0; i < nargs; i++)
+      {
+	switch (argclass[i])
+	  {
+	  case string_arg:
+	    {
+	      char *str;
+	      CORE_ADDR tem;
+	      int j;
+	      tem = value_as_pointer (val_args[i]);
+
+	      /* This is a %s argument.  Find the length of the string.  */
+	      for (j = 0; ; j++)
+		{
+		  char c;
+		  QUIT;
+		  read_memory_section (tem + j, &c, 1,
+				       VALUE_BFD_SECTION (val_args[i]));
+		  if (c == 0)
+		    break;
+		}
+
+	      /* Copy the string contents into a string inside GDB.  */
+	      str = (char *) alloca (j + 1);
+	      read_memory_section (tem, str, j, VALUE_BFD_SECTION (val_args[i]));
+	      str[j] = 0;
+
+	      printf_filtered (current_substring, str);
+	    }
+	    break;
+	  case double_arg:
+	    {
+	      double val = value_as_double (val_args[i]);
+	      printf_filtered (current_substring, val);
+	      break;
+	    }
+	  case long_long_arg:
+#if defined (CC_HAS_LONG_LONG) && defined (PRINTF_HAS_LONG_LONG)
+	    {
+	      long long val = value_as_long (val_args[i]);
+	      printf_filtered (current_substring, val);
+	      break;
+	    }
+#else
+	    error ("long long not supported in printf");
+#endif
+	  case int_arg:
+	    {
+	      /* FIXME: there should be separate int_arg and long_arg.  */
+	      long val = value_as_long (val_args[i]);
+	      printf_filtered (current_substring, val);
+	      break;
+	    }
+	  default: /* purecov: deadcode */
+	    error ("internal error in printf_command"); /* purecov: deadcode */
+	  }
+	/* Skip to the next substring.  */
+	current_substring += strlen (current_substring) + 1;
+      }
+    /* Print the portion of the format string after the last argument.  */
+    printf_filtered (last_arg);
+  }
+  do_cleanups (old_cleanups);
+}
+
+/* Dump a specified section of assembly code.  With no command line
+   arguments, this command will dump the assembly code for the
+   function surrounding the pc value in the selected frame.  With one
+   argument, it will dump the assembly code surrounding that pc value.
+   Two arguments are interpeted as bounds within which to dump
+   assembly.  */
+
+/* ARGSUSED */
+static void
+disassemble_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  CORE_ADDR low, high;
+  char *name;
+  CORE_ADDR pc, pc_masked;
+  char *space_index;
+#if 0
+  asection *section;
+#endif
+
+  name = NULL;
+  if (!arg)
+    {
+      if (!selected_frame)
+	error ("No frame selected.\n");
+
+      pc = get_frame_pc (selected_frame);
+      if (find_pc_partial_function (pc, &name, &low, &high) == 0)
+	error ("No function contains program counter for selected frame.\n");
+#if defined(TUI)
+      else if (tui_version)
+        low = (CORE_ADDR)tuiDo((TuiOpaqueFuncPtr)tui_vGetLowDisassemblyAddress, 
+			       (Opaque)low, 
+			       (Opaque)pc);
+#endif
+      low += FUNCTION_START_OFFSET;
+    }
+  else if (!(space_index = (char *) strchr (arg, ' ')))
+    {
+      /* One argument.  */
+      pc = parse_and_eval_address (arg);
+      if (find_pc_partial_function (pc, &name, &low, &high) == 0)
+	error ("No function contains specified address.\n");
+#if defined(TUI)
+      else if (tui_version)
+        low = (CORE_ADDR)tuiDo((TuiOpaqueFuncPtr)tui_vGetLowDisassemblyAddress, 
+			       (Opaque)low, 
+			       (Opaque)pc);
+#endif
+#if 0
+      if (overlay_debugging)
+	{
+	  section = find_pc_overlay (pc);
+	  if (pc_in_unmapped_range (pc, section))
+	    {
+	      /* find_pc_partial_function will have returned low and high
+		 relative to the symbolic (mapped) address range.  Need to
+		 translate them back to the unmapped range where PC is.  */
+	      low  = overlay_unmapped_address (low, section);
+	      high = overlay_unmapped_address (high, section);
+	    }
+	}
+#endif
+      low += FUNCTION_START_OFFSET;
+    }
+  else
+    {
+      /* Two arguments.  */
+      *space_index = '\0';
+      low = parse_and_eval_address (arg);
+      high = parse_and_eval_address (space_index + 1);
+    }
+
+#if defined(TUI)
+  if (!tui_version ||
+      m_winPtrIsNull(disassemWin) || !disassemWin->generic.isVisible)
+#endif
+    {
+      printf_filtered ("Dump of assembler code ");
+      if (name != NULL)
+	{
+	  printf_filtered ("for function %s:\n", name);
+	}
+      else
+	{
+	  printf_filtered ("from ");
+	  print_address_numeric (low, 1, gdb_stdout);
+	  printf_filtered (" to ");
+	  print_address_numeric (high, 1, gdb_stdout);
+	  printf_filtered (":\n");
+	}
+
+      /* Dump the specified range.  */
+      pc = low;
+
+#ifdef GDB_TARGET_MASK_DISAS_PC
+      pc_masked = GDB_TARGET_MASK_DISAS_PC (pc);
+#else
+      pc_masked = pc;
+#endif
+
+      while (pc_masked < high)
+	{
+	  QUIT;
+	  print_address (pc_masked, gdb_stdout);
+	  printf_filtered (":\t");
+	  /* We often wrap here if there are long symbolic names.  */
+	  wrap_here ("    ");
+	  pc += print_insn (pc, gdb_stdout);
+	  printf_filtered ("\n");
+
+#ifdef GDB_TARGET_MASK_DISAS_PC
+	  pc_masked = GDB_TARGET_MASK_DISAS_PC (pc);
+#else
+	  pc_masked = pc;
+#endif
+	}
+      printf_filtered ("End of assembler dump.\n");
+      gdb_flush (gdb_stdout);
+    }
+#if defined(TUI)
+  else
+    {
+      tuiDo((TuiOpaqueFuncPtr)tui_vAddWinToLayout, DISASSEM_WIN);
+      tuiDo((TuiOpaqueFuncPtr)tui_vUpdateSourceWindowsWithAddr, low);
+    }
+#endif
+}
+
+/* Print the instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+static int
+print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     GDB_FILE *stream;
+{
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    TARGET_PRINT_INSN_INFO->endian = BFD_ENDIAN_BIG;
+  else
+    TARGET_PRINT_INSN_INFO->endian = BFD_ENDIAN_LITTLE;
+
+  if (TARGET_ARCHITECTURE != NULL)
+    TARGET_PRINT_INSN_INFO->mach = TARGET_ARCHITECTURE->mach;
+  /* else: should set .mach=0 but some disassemblers don't grok this */
+
+  return TARGET_PRINT_INSN (memaddr, TARGET_PRINT_INSN_INFO);
+}
+
+
+void
+_initialize_printcmd ()
+{
+  current_display_number = -1;
+
+  add_info ("address", address_info,
+	   "Describe where symbol SYM is stored.");
+
+  add_info ("symbol", sym_info, 
+	    "Describe what symbol is at location ADDR.\n\
+Only for symbols with fixed locations (global or static scope).");
+
+  add_com ("x", class_vars, x_command,
+	   concat ("Examine memory: x/FMT ADDRESS.\n\
+ADDRESS is an expression for the memory address to examine.\n\
+FMT is a repeat count followed by a format letter and a size letter.\n\
+Format letters are o(octal), x(hex), d(decimal), u(unsigned decimal),\n\
+  t(binary), f(float), a(address), i(instruction), c(char) and s(string).\n",
+"Size letters are b(byte), h(halfword), w(word), g(giant, 8 bytes).\n\
+The specified number of objects of the specified size are printed\n\
+according to the format.\n\n\
+Defaults for format and size letters are those previously used.\n\
+Default count is 1.  Default address is following last thing printed\n\
+with this command or \"print\".", NULL));
+
+  add_com ("disassemble", class_vars, disassemble_command,
+	   "Disassemble a specified section of memory.\n\
+Default is the function surrounding the pc of the selected frame.\n\
+With a single argument, the function surrounding that address is dumped.\n\
+Two arguments are taken as a range of memory to dump.");
+  if (xdb_commands)
+  	add_com_alias ("va", "disassemble", class_xdb, 0);
+
+#if 0
+  add_com ("whereis", class_vars, whereis_command,
+	   "Print line number and file of definition of variable.");
+#endif
+  
+  add_info ("display", display_info,
+	    "Expressions to display when program stops, with code numbers.");
+
+  add_cmd ("undisplay", class_vars, undisplay_command,
+	   "Cancel some expressions to be displayed when program stops.\n\
+Arguments are the code numbers of the expressions to stop displaying.\n\
+No argument means cancel all automatic-display expressions.\n\
+\"delete display\" has the same effect as this command.\n\
+Do \"info display\" to see current list of code numbers.",
+		  &cmdlist);
+
+  add_com ("display", class_vars, display_command,
+	   "Print value of expression EXP each time the program stops.\n\
+/FMT may be used before EXP as in the \"print\" command.\n\
+/FMT \"i\" or \"s\" or including a size-letter is allowed,\n\
+as in the \"x\" command, and then EXP is used to get the address to examine\n\
+and examining is done as in the \"x\" command.\n\n\
+With no argument, display all currently requested auto-display expressions.\n\
+Use \"undisplay\" to cancel display requests previously made."
+);
+
+  add_cmd ("display", class_vars, enable_display, 
+	   "Enable some expressions to be displayed when program stops.\n\
+Arguments are the code numbers of the expressions to resume displaying.\n\
+No argument means enable all automatic-display expressions.\n\
+Do \"info display\" to see current list of code numbers.", &enablelist);
+
+  add_cmd ("display", class_vars, disable_display_command, 
+	   "Disable some expressions to be displayed when program stops.\n\
+Arguments are the code numbers of the expressions to stop displaying.\n\
+No argument means disable all automatic-display expressions.\n\
+Do \"info display\" to see current list of code numbers.", &disablelist);
+
+  add_cmd ("display", class_vars, undisplay_command, 
+	   "Cancel some expressions to be displayed when program stops.\n\
+Arguments are the code numbers of the expressions to stop displaying.\n\
+No argument means cancel all automatic-display expressions.\n\
+Do \"info display\" to see current list of code numbers.", &deletelist);
+
+  add_com ("printf", class_vars, printf_command,
+	"printf \"printf format string\", arg1, arg2, arg3, ..., argn\n\
+This is useful for formatted output in user-defined commands.");
+
+  add_com ("output", class_vars, output_command,
+	   "Like \"print\" but don't put in value history and don't print newline.\n\
+This is useful in user-defined commands.");
+
+  add_prefix_cmd ("set", class_vars, set_command,
+concat ("Evaluate expression EXP and assign result to variable VAR, using assignment\n\
+syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n\
+example).  VAR may be a debugger \"convenience\" variable (names starting\n\
+with $), a register (a few standard names starting with $), or an actual\n\
+variable in the program being debugged.  EXP is any valid expression.\n",
+"Use \"set variable\" for variables with names identical to set subcommands.\n\
+\nWith a subcommand, this command modifies parts of the gdb environment.\n\
+You can see these environment settings with the \"show\" command.", NULL),
+                  &setlist, "set ", 1, &cmdlist);
+  if (dbx_commands)
+    add_com("assign", class_vars, set_command, concat ("Evaluate expression \
+EXP and assign result to variable VAR, using assignment\n\
+syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n\
+example).  VAR may be a debugger \"convenience\" variable (names starting\n\
+with $), a register (a few standard names starting with $), or an actual\n\
+variable in the program being debugged.  EXP is any valid expression.\n",
+"Use \"set variable\" for variables with names identical to set subcommands.\n\
+\nWith a subcommand, this command modifies parts of the gdb environment.\n\
+You can see these environment settings with the \"show\" command.", NULL));
+
+  /* "call" is the same as "set", but handy for dbx users to call fns. */
+  add_com ("call", class_vars, call_command,
+	   "Call a function in the program.\n\
+The argument is the function name and arguments, in the notation of the\n\
+current working language.  The result is printed and saved in the value\n\
+history, if it is not void.");
+
+  add_cmd ("variable", class_vars, set_command,
+"Evaluate expression EXP and assign result to variable VAR, using assignment\n\
+syntax appropriate for the current language (VAR = EXP or VAR := EXP for\n\
+example).  VAR may be a debugger \"convenience\" variable (names starting\n\
+with $), a register (a few standard names starting with $), or an actual\n\
+variable in the program being debugged.  EXP is any valid expression.\n\
+This may usually be abbreviated to simply \"set\".",
+           &setlist);
+
+  add_com ("print", class_vars, print_command,
+	   concat ("Print value of expression EXP.\n\
+Variables accessible are those of the lexical environment of the selected\n\
+stack frame, plus all those whose scope is global or an entire file.\n\
+\n\
+$NUM gets previous value number NUM.  $ and $$ are the last two values.\n\
+$$NUM refers to NUM'th value back from the last one.\n\
+Names starting with $ refer to registers (with the values they would have\n",
+"if the program were to return to the stack frame now selected, restoring\n\
+all registers saved by frames farther in) or else to debugger\n\
+\"convenience\" variables (any such name not a known register).\n\
+Use assignment expressions to give values to convenience variables.\n",
+		   "\n\
+{TYPE}ADREXP refers to a datum of data type TYPE, located at address ADREXP.\n\
+@ is a binary operator for treating consecutive data objects\n\
+anywhere in memory as an array.  FOO@NUM gives an array whose first\n\
+element is FOO, whose second element is stored in the space following\n\
+where FOO is stored, etc.  FOO must be an expression whose value\n\
+resides in memory.\n",
+		   "\n\
+EXP may be preceded with /FMT, where FMT is a format letter\n\
+but no count or size letter (see \"x\" command).", NULL));
+  add_com_alias ("p", "print", class_vars, 1);
+
+  add_com ("inspect", class_vars, inspect_command,
+"Same as \"print\" command, except that if you are running in the epoch\n\
+environment, the value is printed in its own window.");
+
+  add_show_from_set (
+      add_set_cmd ("max-symbolic-offset", no_class, var_uinteger,
+		   (char *)&max_symbolic_offset,
+	"Set the largest offset that will be printed in <symbol+1234> form.",
+		   &setprintlist),
+      &showprintlist);
+  add_show_from_set (
+      add_set_cmd ("symbol-filename", no_class, var_boolean,
+		   (char *)&print_symbol_filename,
+	"Set printing of source filename and line number with <symbol>.",
+		   &setprintlist),
+      &showprintlist);
+
+  /* For examine/instruction a single byte quantity is specified as
+     the data.  This avoids problems with value_at_lazy() requiring a
+     valid data type (and rejecting VOID). */
+  examine_i_type = init_type (TYPE_CODE_INT, 1, 0, "examine_i_type", NULL);
+
+  examine_b_type = init_type (TYPE_CODE_INT, 1, 0, "examine_b_type", NULL);
+  examine_h_type = init_type (TYPE_CODE_INT, 2, 0, "examine_h_type", NULL);
+  examine_w_type = init_type (TYPE_CODE_INT, 4, 0, "examine_w_type", NULL);
+  examine_g_type = init_type (TYPE_CODE_INT, 8, 0, "examine_g_type", NULL);
+
+}
diff --git a/gdb/process_reply.defs b/gdb/process_reply.defs
new file mode 100644
index 0000000..824b5c6
--- /dev/null
+++ b/gdb/process_reply.defs
@@ -0,0 +1 @@
+#include <hurd/process_reply.defs>
diff --git a/gdb/procfs.c b/gdb/procfs.c
new file mode 100644
index 0000000..ff20240
--- /dev/null
+++ b/gdb/procfs.c
@@ -0,0 +1,5764 @@
+/* Machine independent support for SVR4 /proc (process file system) for GDB.
+   Copyright 1991, 1992-98, 1999 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.  Changes for sysv4.2mp procfs
+   compatibility by Geoffrey Noer at Cygnus Solutions.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/*			N  O  T  E  S
+
+For information on the details of using /proc consult section proc(4)
+in the UNIX System V Release 4 System Administrator's Reference Manual.
+
+The general register and floating point register sets are manipulated
+separately.  This file makes the assumption that if FP0_REGNUM is
+defined, then support for the floating point register set is desired,
+regardless of whether or not the actual target has floating point hardware.
+
+ */
+
+
+#include "defs.h"
+
+#include <sys/types.h>
+#include <time.h>
+#include <sys/fault.h>
+#include <sys/syscall.h>
+#include <sys/procfs.h>
+#include <fcntl.h>
+#include <errno.h>
+#include "gdb_string.h"
+#include <stropts.h>
+#include <poll.h>
+#include <unistd.h>
+#include "gdb_stat.h"
+
+#include "inferior.h"
+#include "target.h"
+#include "command.h"
+#include "gdbcore.h"
+#include "gdbthread.h"
+
+#if !defined(SYS_lwp_create) && defined(SYS_lwpcreate)
+# define SYS_lwp_create SYS_lwpcreate
+#endif
+
+#if !defined(SYS_lwp_exit) && defined(SYS_lwpexit)
+# define SYS_lwp_exit SYS_lwpexit
+#endif
+
+#if !defined(SYS_lwp_wait) && defined(SYS_lwpwait)
+# define SYS_lwp_wait SYS_lwpwait
+#endif
+
+#if !defined(SYS_lwp_self) && defined(SYS_lwpself)
+# define SYS_lwp_self SYS_lwpself
+#endif
+
+#if !defined(SYS_lwp_info) && defined(SYS_lwpinfo)
+# define SYS_lwp_info SYS_lwpinfo
+#endif
+
+#if !defined(SYS_lwp_private) && defined(SYS_lwpprivate)
+# define SYS_lwp_private SYS_lwpprivate
+#endif
+
+#if !defined(SYS_lwp_kill) && defined(SYS_lwpkill)
+# define SYS_lwp_kill SYS_lwpkill
+#endif
+
+#if !defined(SYS_lwp_suspend) && defined(SYS_lwpsuspend)
+# define SYS_lwp_suspend SYS_lwpsuspend
+#endif
+
+#if !defined(SYS_lwp_continue) && defined(SYS_lwpcontinue)
+# define SYS_lwp_continue SYS_lwpcontinue
+#endif
+
+/* the name of the proc status struct depends on the implementation */
+/* Wrap Light Weight Process member in THE_PR_LWP macro for clearer code */
+#ifndef HAVE_PSTATUS_T
+  typedef prstatus_t gdb_prstatus_t;
+#define THE_PR_LWP(a)	a
+#else	/* HAVE_PSTATUS_T */
+  typedef pstatus_t gdb_prstatus_t;
+#define THE_PR_LWP(a)	a.pr_lwp
+#if !defined(HAVE_PRRUN_T) && defined(HAVE_MULTIPLE_PROC_FDS)
+  /* Fallback definitions - for using configure information directly */
+#ifndef UNIXWARE
+#define UNIXWARE	1
+#endif
+#if !defined(PROCFS_USE_READ_WRITE) && !defined(HAVE_PROCFS_PIOCSET)
+#define PROCFS_USE_READ_WRITE	1
+#endif
+#endif	/* !HAVE_PRRUN_T && HAVE_MULTIPLE_PROC_FDS */
+#endif	/* HAVE_PSTATUS_T */
+
+#define MAX_SYSCALLS	256	/* Maximum number of syscalls for table */
+
+/* proc name formats may vary depending on the proc implementation */
+#ifdef HAVE_MULTIPLE_PROC_FDS
+#  ifndef CTL_PROC_NAME_FMT
+#  define CTL_PROC_NAME_FMT "/proc/%d/ctl"
+#  define AS_PROC_NAME_FMT "/proc/%d/as"
+#  define MAP_PROC_NAME_FMT "/proc/%d/map"
+#  define STATUS_PROC_NAME_FMT "/proc/%d/status"
+#  endif
+#else /* HAVE_MULTIPLE_PROC_FDS */
+#  ifndef CTL_PROC_NAME_FMT
+#  define CTL_PROC_NAME_FMT "/proc/%05d"
+#  define AS_PROC_NAME_FMT "/proc/%05d"
+#  define MAP_PROC_NAME_FMT "/proc/%05d"
+#  define STATUS_PROC_NAME_FMT "/proc/%05d"
+#  endif
+#endif /* HAVE_MULTIPLE_PROC_FDS */
+
+
+/* These #ifdefs are for sol2.x in particular.  sol2.x has
+   both a "gregset_t" and a "prgregset_t", which have
+   similar uses but different layouts.  sol2.x gdb tries to
+   use prgregset_t (and prfpregset_t) everywhere. */
+
+#ifdef GDB_GREGSET_TYPE
+  typedef GDB_GREGSET_TYPE gdb_gregset_t;
+#else
+  typedef gregset_t gdb_gregset_t;
+#endif
+
+#ifdef GDB_FPREGSET_TYPE
+  typedef GDB_FPREGSET_TYPE gdb_fpregset_t;
+#else
+  typedef fpregset_t gdb_fpregset_t;
+#endif
+
+
+#define MAX_PROC_NAME_SIZE sizeof("/proc/1234567890/status")
+
+struct target_ops procfs_ops;
+
+int procfs_suppress_run = 0;	/* Non-zero if procfs should pretend not to
+				   be a runnable target.  Used by targets
+				   that can sit atop procfs, such as solaris
+				   thread support.  */
+
+#if 1	/* FIXME: Gross and ugly hack to resolve coredep.c global */
+CORE_ADDR kernel_u_addr;
+#endif
+
+#ifdef BROKEN_SIGINFO_H		/* Workaround broken SGS <sys/siginfo.h> */
+#undef si_pid
+#define si_pid _data._proc.pid
+#undef si_uid
+#define si_uid _data._proc._pdata._kill.uid
+#endif /* BROKEN_SIGINFO_H */
+
+/* Define structures for passing commands to /proc/pid/ctl file.  Note that
+   while we create these for the PROCFS_USE_READ_WRITE world, we use them
+   and ignore the extra cmd int in other proc schemes.
+*/
+/* generic ctl msg */
+struct proc_ctl {
+        int     cmd;
+        long    data;
+};
+
+/* set general registers */
+struct greg_ctl {
+        int             cmd;
+        gdb_gregset_t	gregset;
+};
+
+/* set fp registers */
+struct fpreg_ctl {
+        int             cmd;
+        gdb_fpregset_t	fpregset;
+};
+
+/* set signals to be traced */
+struct sig_ctl {
+        int             cmd;
+        sigset_t        sigset;
+};
+
+/* set faults to be traced */
+struct flt_ctl {
+        int             cmd;
+        fltset_t        fltset;
+};
+
+/* set system calls to be traced */
+struct sys_ctl {
+        int             cmd;
+        sysset_t        sysset;
+};
+
+/* set current signal to be traced */
+struct sigi_ctl {
+        int             cmd;
+        siginfo_t       siginfo;
+};
+
+/*  All access to the inferior, either one started by gdb or one that has
+    been attached to, is controlled by an instance of a procinfo structure,
+    defined below.  Since gdb currently only handles one inferior at a time,
+    the procinfo structure for the inferior is statically allocated and
+    only one exists at any given time.  There is a separate procinfo
+    structure for use by the "info proc" command, so that we can print
+    useful information about any random process without interfering with
+    the inferior's procinfo information. */
+
+struct procinfo {
+  struct procinfo *next;
+  int pid;			/* Process ID of inferior */
+  int ctl_fd;			/* File descriptor for /proc ctl file */
+  int status_fd;		/* File descriptor for /proc status file */
+  int as_fd;			/* File descriptor for /proc as file */
+  int map_fd;			/* File descriptor for /proc map file */
+  char *pathname;		/* Pathname to /proc entry */
+  int had_event;		/* poll/select says something happened */
+  int was_stopped;		/* Nonzero if was stopped prior to attach */
+  int nopass_next_sigstop;	/* Don't pass a sigstop on next resume */
+#ifdef HAVE_PRRUN_T
+  prrun_t prrun;		/* Control state when it is run */
+#endif
+  gdb_prstatus_t prstatus;	/* Current process status info */
+  struct greg_ctl gregset;	/* General register set */
+  struct fpreg_ctl fpregset;	/* Floating point register set */
+  struct flt_ctl fltset;	/* Current traced hardware fault set */
+  struct sig_ctl trace;		/* Current traced signal set */
+  struct sys_ctl exitset;	/* Current traced system call exit set */
+  struct sys_ctl entryset;	/* Current traced system call entry set */
+  struct sig_ctl saved_sighold;	/* Saved held signal set */
+  struct flt_ctl saved_fltset;  /* Saved traced hardware fault set */
+  struct sig_ctl saved_trace;   /* Saved traced signal set */
+  struct sys_ctl saved_exitset; /* Saved traced system call exit set */
+  struct sys_ctl saved_entryset;/* Saved traced system call entry set */
+  int num_syscall_handlers;	/* Number of syscall trap handlers
+				   currently installed */
+				/* Pointer to list of syscall trap handlers */
+  struct procfs_syscall_handler *syscall_handlers; 
+  int saved_rtnval;		/* return value and status for wait(), */
+  int saved_statval;		/*  as supplied by a syscall handler. */
+  int new_child;		/* Non-zero if it's a new thread */
+};
+
+/* List of inferior process information */
+static struct procinfo *procinfo_list = NULL;
+static struct pollfd *poll_list; /* pollfds used for waiting on /proc */
+
+static int num_poll_list = 0;	/* Number of entries in poll_list */
+
+/*  Much of the information used in the /proc interface, particularly for
+    printing status information, is kept as tables of structures of the
+    following form.  These tables can be used to map numeric values to
+    their symbolic names and to a string that describes their specific use. */
+
+struct trans {
+  int value;			/* The numeric value */
+  char *name;			/* The equivalent symbolic value */
+  char *desc;			/* Short description of value */
+};
+
+/*  Translate bits in the pr_flags member of the prstatus structure, into the
+    names and desc information. */
+
+static struct trans pr_flag_table[] =
+{
+#if defined (PR_STOPPED)
+  { PR_STOPPED, "PR_STOPPED", "Process is stopped" },
+#endif
+#if defined (PR_ISTOP)
+  { PR_ISTOP, "PR_ISTOP", "Stopped on an event of interest" },
+#endif
+#if defined (PR_DSTOP)
+  { PR_DSTOP, "PR_DSTOP", "A stop directive is in effect" },
+#endif
+#if defined (PR_ASLEEP)
+  { PR_ASLEEP, "PR_ASLEEP", "Sleeping in an interruptible system call" },
+#endif
+#if defined (PR_FORK)
+  { PR_FORK, "PR_FORK", "Inherit-on-fork is in effect" },
+#endif
+#if defined (PR_RLC)
+  { PR_RLC, "PR_RLC", "Run-on-last-close is in effect" },
+#endif
+#if defined (PR_PTRACE)
+  { PR_PTRACE, "PR_PTRACE", "Process is being controlled by ptrace" },
+#endif
+#if defined (PR_PCINVAL)
+  { PR_PCINVAL, "PR_PCINVAL", "PC refers to an invalid virtual address" },
+#endif
+#if defined (PR_ISSYS)
+  { PR_ISSYS, "PR_ISSYS", "Is a system process" },
+#endif
+#if defined (PR_STEP)
+  { PR_STEP, "PR_STEP", "Process has single step pending" },
+#endif
+#if defined (PR_KLC)
+  { PR_KLC, "PR_KLC", "Kill-on-last-close is in effect" },
+#endif
+#if defined (PR_ASYNC)
+  { PR_ASYNC, "PR_ASYNC", "Asynchronous stop is in effect" },
+#endif
+#if defined (PR_PCOMPAT)
+  { PR_PCOMPAT, "PR_PCOMPAT", "Ptrace compatibility mode in effect" },
+#endif
+#if defined (PR_MSACCT)
+  { PR_MSACCT, "PR_MSACCT", "Microstate accounting enabled" },
+#endif
+#if defined (PR_BPTADJ)
+  { PR_BPTADJ, "PR_BPTADJ", "Breakpoint PC adjustment in effect" },
+#endif
+#if defined (PR_ASLWP)
+  { PR_ASLWP, "PR_ASLWP", "Asynchronus signal LWP" },
+#endif
+  { 0, NULL, NULL }
+};
+
+/*  Translate values in the pr_why field of the prstatus struct. */
+
+static struct trans pr_why_table[] =
+{
+#if defined (PR_REQUESTED)
+  { PR_REQUESTED, "PR_REQUESTED", "Directed to stop via PIOCSTOP/PIOCWSTOP" },
+#endif
+#if defined (PR_SIGNALLED)
+  { PR_SIGNALLED, "PR_SIGNALLED", "Receipt of a traced signal" },
+#endif
+#if defined (PR_SYSENTRY)
+  { PR_SYSENTRY, "PR_SYSENTRY", "Entry to a traced system call" },
+#endif
+#if defined (PR_SYSEXIT)
+  { PR_SYSEXIT, "PR_SYSEXIT", "Exit from a traced system call" },
+#endif
+#if defined (PR_JOBCONTROL)
+  { PR_JOBCONTROL, "PR_JOBCONTROL", "Default job control stop signal action" },
+#endif
+#if defined (PR_FAULTED)
+  { PR_FAULTED, "PR_FAULTED", "Incurred a traced hardware fault" },
+#endif
+#if defined (PR_SUSPENDED)
+  { PR_SUSPENDED, "PR_SUSPENDED", "Process suspended" },
+#endif
+#if defined (PR_CHECKPOINT)
+  { PR_CHECKPOINT, "PR_CHECKPOINT", "(???)" },
+#endif
+  { 0, NULL, NULL }
+};
+
+/*  Hardware fault translation table. */
+
+static struct trans faults_table[] =
+{
+#if defined (FLTILL)
+  { FLTILL, "FLTILL", "Illegal instruction" },
+#endif
+#if defined (FLTPRIV)
+  { FLTPRIV, "FLTPRIV", "Privileged instruction" },
+#endif
+#if defined (FLTBPT)
+  { FLTBPT, "FLTBPT", "Breakpoint trap" },
+#endif
+#if defined (FLTTRACE)
+  { FLTTRACE, "FLTTRACE", "Trace trap" },
+#endif
+#if defined (FLTACCESS)
+  { FLTACCESS, "FLTACCESS", "Memory access fault" },
+#endif
+#if defined (FLTBOUNDS)
+  { FLTBOUNDS, "FLTBOUNDS", "Memory bounds violation" },
+#endif
+#if defined (FLTIOVF)
+  { FLTIOVF, "FLTIOVF", "Integer overflow" },
+#endif
+#if defined (FLTIZDIV)
+  { FLTIZDIV, "FLTIZDIV", "Integer zero divide" },
+#endif
+#if defined (FLTFPE)
+  { FLTFPE, "FLTFPE", "Floating-point exception" },
+#endif
+#if defined (FLTSTACK)
+  { FLTSTACK, "FLTSTACK", "Unrecoverable stack fault" },
+#endif
+#if defined (FLTPAGE)
+  { FLTPAGE, "FLTPAGE", "Recoverable page fault" },
+#endif
+  { 0, NULL, NULL }
+};
+
+/* Translation table for signal generation information.  See UNIX System
+   V Release 4 Programmer's Reference Manual, siginfo(5).  */
+
+static struct sigcode {
+  int signo;
+  int code;
+  char *codename;
+  char *desc;
+} siginfo_table[] = {
+#if defined (SIGILL) && defined (ILL_ILLOPC)
+  { SIGILL, ILL_ILLOPC, "ILL_ILLOPC", "Illegal opcode" },
+#endif
+#if defined (SIGILL) && defined (ILL_ILLOPN)
+  { SIGILL, ILL_ILLOPN, "ILL_ILLOPN", "Illegal operand", },
+#endif
+#if defined (SIGILL) && defined (ILL_ILLADR)
+  { SIGILL, ILL_ILLADR, "ILL_ILLADR", "Illegal addressing mode" },
+#endif
+#if defined (SIGILL) && defined (ILL_ILLTRP)
+  { SIGILL, ILL_ILLTRP, "ILL_ILLTRP", "Illegal trap" },
+#endif
+#if defined (SIGILL) && defined (ILL_PRVOPC)
+  { SIGILL, ILL_PRVOPC, "ILL_PRVOPC", "Privileged opcode" },
+#endif
+#if defined (SIGILL) && defined (ILL_PRVREG)
+  { SIGILL, ILL_PRVREG, "ILL_PRVREG", "Privileged register" },
+#endif
+#if defined (SIGILL) && defined (ILL_COPROC)
+  { SIGILL, ILL_COPROC, "ILL_COPROC", "Coprocessor error" },
+#endif
+#if defined (SIGILL) && defined (ILL_BADSTK)
+  { SIGILL, ILL_BADSTK, "ILL_BADSTK", "Internal stack error" },
+#endif
+#if defined (SIGFPE) && defined (FPE_INTDIV)
+  { SIGFPE, FPE_INTDIV, "FPE_INTDIV", "Integer divide by zero" },
+#endif
+#if defined (SIGFPE) && defined (FPE_INTOVF)
+  { SIGFPE, FPE_INTOVF, "FPE_INTOVF", "Integer overflow" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTDIV)
+  { SIGFPE, FPE_FLTDIV, "FPE_FLTDIV", "Floating point divide by zero" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTOVF)
+  { SIGFPE, FPE_FLTOVF, "FPE_FLTOVF", "Floating point overflow" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTUND)
+  { SIGFPE, FPE_FLTUND, "FPE_FLTUND", "Floating point underflow" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTRES)
+  { SIGFPE, FPE_FLTRES, "FPE_FLTRES", "Floating point inexact result" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTINV)
+  { SIGFPE, FPE_FLTINV, "FPE_FLTINV", "Invalid floating point operation" },
+#endif
+#if defined (SIGFPE) && defined (FPE_FLTSUB)
+  { SIGFPE, FPE_FLTSUB, "FPE_FLTSUB", "Subscript out of range" },
+#endif
+#if defined (SIGSEGV) && defined (SEGV_MAPERR)
+  { SIGSEGV, SEGV_MAPERR, "SEGV_MAPERR", "Address not mapped to object" },
+#endif
+#if defined (SIGSEGV) && defined (SEGV_ACCERR)
+  { SIGSEGV, SEGV_ACCERR, "SEGV_ACCERR", "Invalid permissions for object" },
+#endif
+#if defined (SIGBUS) && defined (BUS_ADRALN)
+  { SIGBUS, BUS_ADRALN, "BUS_ADRALN", "Invalid address alignment" },
+#endif
+#if defined (SIGBUS) && defined (BUS_ADRERR)
+  { SIGBUS, BUS_ADRERR, "BUS_ADRERR", "Non-existent physical address" },
+#endif
+#if defined (SIGBUS) && defined (BUS_OBJERR)
+  { SIGBUS, BUS_OBJERR, "BUS_OBJERR", "Object specific hardware error" },
+#endif
+#if defined (SIGTRAP) && defined (TRAP_BRKPT)
+  { SIGTRAP, TRAP_BRKPT, "TRAP_BRKPT", "Process breakpoint" },
+#endif
+#if defined (SIGTRAP) && defined (TRAP_TRACE)
+  { SIGTRAP, TRAP_TRACE, "TRAP_TRACE", "Process trace trap" },
+#endif
+#if defined (SIGCLD) && defined (CLD_EXITED)
+  { SIGCLD, CLD_EXITED, "CLD_EXITED", "Child has exited" },
+#endif
+#if defined (SIGCLD) && defined (CLD_KILLED)
+  { SIGCLD, CLD_KILLED, "CLD_KILLED", "Child was killed" },
+#endif
+#if defined (SIGCLD) && defined (CLD_DUMPED)
+  { SIGCLD, CLD_DUMPED, "CLD_DUMPED", "Child has terminated abnormally" },
+#endif
+#if defined (SIGCLD) && defined (CLD_TRAPPED)
+  { SIGCLD, CLD_TRAPPED, "CLD_TRAPPED", "Traced child has trapped" },
+#endif
+#if defined (SIGCLD) && defined (CLD_STOPPED)
+  { SIGCLD, CLD_STOPPED, "CLD_STOPPED", "Child has stopped" },
+#endif
+#if defined (SIGCLD) && defined (CLD_CONTINUED)
+  { SIGCLD, CLD_CONTINUED, "CLD_CONTINUED", "Stopped child had continued" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_IN)
+  { SIGPOLL, POLL_IN, "POLL_IN", "Input input available" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_OUT)
+  { SIGPOLL, POLL_OUT, "POLL_OUT", "Output buffers available" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_MSG)
+  { SIGPOLL, POLL_MSG, "POLL_MSG", "Input message available" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_ERR)
+  { SIGPOLL, POLL_ERR, "POLL_ERR", "I/O error" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_PRI)
+  { SIGPOLL, POLL_PRI, "POLL_PRI", "High priority input available" },
+#endif
+#if defined (SIGPOLL) && defined (POLL_HUP)
+  { SIGPOLL, POLL_HUP, "POLL_HUP", "Device disconnected" },
+#endif
+  { 0, 0, NULL, NULL }
+};
+
+static char *syscall_table[MAX_SYSCALLS];
+
+/* Prototypes for local functions */
+
+static void procfs_stop PARAMS ((void));
+
+static int procfs_thread_alive PARAMS ((int));
+
+static int procfs_can_run PARAMS ((void));
+
+static void procfs_mourn_inferior PARAMS ((void));
+
+static void procfs_fetch_registers PARAMS ((int));
+
+static int procfs_wait PARAMS ((int, struct target_waitstatus *));
+
+static void procfs_open PARAMS ((char *, int));
+
+static void procfs_files_info PARAMS ((struct target_ops *));
+
+static void procfs_prepare_to_store PARAMS ((void));
+
+static void procfs_detach PARAMS ((char *, int));
+
+static void procfs_attach PARAMS ((char *, int));
+
+static void proc_set_exec_trap PARAMS ((void));
+
+static void  procfs_init_inferior PARAMS ((int));
+
+static struct procinfo *create_procinfo PARAMS ((int));
+
+static void procfs_store_registers PARAMS ((int));
+
+static int procfs_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+static void procfs_kill_inferior PARAMS ((void));
+
+static char *sigcodedesc PARAMS ((siginfo_t *));
+
+static char *sigcodename PARAMS ((siginfo_t *));
+
+static struct procinfo *wait_fd PARAMS ((void));
+
+static void remove_fd PARAMS ((struct procinfo *));
+
+static void add_fd PARAMS ((struct procinfo *));
+
+static void set_proc_siginfo PARAMS ((struct procinfo *, int));
+
+static void init_syscall_table PARAMS ((void));
+
+static char *syscallname PARAMS ((int));
+
+static char *signalname PARAMS ((int));
+
+static char *errnoname PARAMS ((int));
+
+static int proc_address_to_fd PARAMS ((struct procinfo *, CORE_ADDR, int));
+
+static int open_proc_file PARAMS ((int, struct procinfo *, int, int));
+
+static void close_proc_file PARAMS ((struct procinfo *));
+
+static void unconditionally_kill_inferior PARAMS ((struct procinfo *));
+
+static NORETURN void proc_init_failed PARAMS ((struct procinfo *, char *, int)) ATTR_NORETURN;
+
+static void info_proc PARAMS ((char *, int));
+
+static void info_proc_flags PARAMS ((struct procinfo *, int));
+
+static void info_proc_stop PARAMS ((struct procinfo *, int));
+
+static void info_proc_siginfo PARAMS ((struct procinfo *, int));
+
+static void info_proc_syscalls PARAMS ((struct procinfo *, int));
+
+static void info_proc_mappings PARAMS ((struct procinfo *, int));
+
+static void info_proc_signals PARAMS ((struct procinfo *, int));
+
+static void info_proc_faults PARAMS ((struct procinfo *, int));
+
+static char *mappingflags PARAMS ((long));
+
+static char *lookupname PARAMS ((struct trans *, unsigned int, char *));
+
+static char *lookupdesc PARAMS ((struct trans *, unsigned int));
+
+static int do_attach PARAMS ((int pid));
+
+static void do_detach PARAMS ((int siggnal));
+
+static void procfs_create_inferior PARAMS ((char *, char *, char **));
+
+static void procfs_notice_signals PARAMS ((int pid));
+
+static void notice_signals PARAMS ((struct procinfo *, struct sig_ctl *));
+
+static struct procinfo *find_procinfo PARAMS ((pid_t pid, int okfail));
+
+static int procfs_write_pcwstop PARAMS ((struct procinfo *));
+static int procfs_read_status PARAMS ((struct procinfo *));
+static void procfs_write_pckill PARAMS ((struct procinfo *));
+
+typedef int syscall_func_t PARAMS ((struct procinfo *pi, int syscall_num,
+				    int why, int *rtnval, int *statval));
+
+static void procfs_set_syscall_trap PARAMS ((struct procinfo *pi,
+					     int syscall_num, int flags,
+					     syscall_func_t *func));
+
+static void procfs_clear_syscall_trap PARAMS ((struct procinfo *pi,
+					       int syscall_num, int errok));
+
+#define PROCFS_SYSCALL_ENTRY 0x1 /* Trap on entry to sys call */
+#define PROCFS_SYSCALL_EXIT 0x2	/* Trap on exit from sys call */
+
+static syscall_func_t procfs_exit_handler;
+
+static syscall_func_t procfs_exec_handler;
+
+#ifdef SYS_sproc
+static syscall_func_t procfs_sproc_handler;
+static syscall_func_t procfs_fork_handler;
+#endif
+
+#ifdef SYS_lwp_create
+static syscall_func_t procfs_lwp_creation_handler;
+#endif
+
+static void modify_inherit_on_fork_flag PARAMS ((int fd, int flag));
+static void modify_run_on_last_close_flag PARAMS ((int fd, int flag));
+
+/* */
+
+struct procfs_syscall_handler
+{
+  int syscall_num;		/* The number of the system call being handled */
+				/* The function to be called */
+  syscall_func_t *func;
+};
+
+static void procfs_resume PARAMS ((int pid, int step,
+				   enum target_signal signo));
+
+static void init_procfs_ops PARAMS ((void));
+
+/* External function prototypes that can't be easily included in any
+   header file because the args are typedefs in system include files. */
+
+extern void supply_gregset PARAMS ((gdb_gregset_t *));
+
+extern void fill_gregset PARAMS ((gdb_gregset_t *, int));
+
+#ifdef FP0_REGNUM
+extern void supply_fpregset PARAMS ((gdb_fpregset_t *));
+
+extern void fill_fpregset PARAMS ((gdb_fpregset_t *, int));
+#endif
+
+/*
+
+LOCAL FUNCTION
+
+	find_procinfo -- convert a process id to a struct procinfo
+
+SYNOPSIS
+
+	static struct procinfo * find_procinfo (pid_t pid, int okfail);
+
+DESCRIPTION
+	
+	Given a process id, look it up in the procinfo chain.  Returns
+	a struct procinfo *.  If can't find pid, then call error(),
+	unless okfail is set, in which case, return NULL;
+ */
+
+static struct procinfo *
+find_procinfo (pid, okfail)
+     pid_t pid;
+     int okfail;
+{
+  struct procinfo *procinfo;
+
+  for (procinfo = procinfo_list; procinfo; procinfo = procinfo->next)
+    if (procinfo->pid == pid)
+      return procinfo;
+
+  if (okfail)
+    return NULL;
+
+  error ("procfs (find_procinfo):  Couldn't locate pid %d", pid);
+}
+
+/*
+
+LOCAL MACRO
+
+	current_procinfo -- convert inferior_pid to a struct procinfo
+
+SYNOPSIS
+
+	static struct procinfo * current_procinfo;
+
+DESCRIPTION
+	
+	Looks up inferior_pid in the procinfo chain.  Always returns a
+	struct procinfo *.  If process can't be found, we error() out.
+ */
+
+#define current_procinfo find_procinfo (inferior_pid, 0)
+
+/*
+
+LOCAL FUNCTION
+
+	add_fd -- Add the fd to the poll/select list
+
+SYNOPSIS
+
+	static void add_fd (struct procinfo *);
+
+DESCRIPTION
+	
+	Add the fd of the supplied procinfo to the list of fds used for
+	poll/select operations.
+ */
+
+static void
+add_fd (pi)
+     struct procinfo *pi;
+{
+  if (num_poll_list <= 0)
+    poll_list = (struct pollfd *) xmalloc (sizeof (struct pollfd));
+  else
+    poll_list = (struct pollfd *) xrealloc (poll_list,
+					    (num_poll_list + 1)
+					    * sizeof (struct pollfd));
+  poll_list[num_poll_list].fd = pi->ctl_fd;
+#ifdef UNIXWARE
+  poll_list[num_poll_list].events = POLLWRNORM;
+#else
+  poll_list[num_poll_list].events = POLLPRI;
+#endif
+
+  num_poll_list++;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	remove_fd -- Remove the fd from the poll/select list
+
+SYNOPSIS
+
+	static void remove_fd (struct procinfo *);
+
+DESCRIPTION
+	
+	Remove the fd of the supplied procinfo from the list of fds used 
+	for poll/select operations.
+ */
+
+static void
+remove_fd (pi)
+     struct procinfo *pi;
+{
+  int i;
+
+  for (i = 0; i < num_poll_list; i++)
+    {
+      if (poll_list[i].fd == pi->ctl_fd)
+	{
+	  if (i != num_poll_list - 1)
+	    memcpy (poll_list + i, poll_list + i + 1,
+		    (num_poll_list - i - 1) * sizeof (struct pollfd));
+
+	  num_poll_list--;
+
+	  if (num_poll_list == 0)
+	    free (poll_list);
+	  else
+	    poll_list = (struct pollfd *) xrealloc (poll_list,
+						    num_poll_list
+						    * sizeof (struct pollfd));
+	  return;
+	}
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_read_status - get procfs fd status
+
+SYNOPSIS
+
+	static int procfs_read_status (pi) struct procinfo *pi;
+
+DESCRIPTION
+	
+	Given a pointer to a procinfo struct, get the status of
+	the status_fd in the appropriate way.  Returns 0 on failure,
+	1 on success.
+ */
+
+static int
+procfs_read_status (pi)
+  struct procinfo *pi;
+{
+#ifdef PROCFS_USE_READ_WRITE
+   if ((lseek (pi->status_fd, 0, SEEK_SET) < 0) ||
+           (read (pi->status_fd, (char *) &pi->prstatus, 
+             sizeof (gdb_prstatus_t)) != sizeof (gdb_prstatus_t)))
+#else
+  if (ioctl (pi->status_fd, PIOCSTATUS, &pi->prstatus) < 0)
+#endif
+    return 0;
+  else
+    return 1;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_write_pcwstop - send a PCWSTOP to procfs fd
+
+SYNOPSIS
+
+	static int procfs_write_pcwstop (pi) struct procinfo *pi;
+
+DESCRIPTION
+	
+	Given a pointer to a procinfo struct, send a PCWSTOP to
+	the ctl_fd in the appropriate way.  Returns 0 on failure,
+	1 on success.
+ */
+
+static int
+procfs_write_pcwstop (pi)
+  struct procinfo *pi;
+{
+#ifdef PROCFS_USE_READ_WRITE
+  long cmd = PCWSTOP;
+  if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+#else
+  if (ioctl (pi->ctl_fd, PIOCWSTOP, &pi->prstatus) < 0)
+#endif
+    return 0;
+  else
+    return 1;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_write_pckill - send a kill to procfs fd
+
+SYNOPSIS
+
+	static void procfs_write_pckill (pi) struct procinfo *pi;
+
+DESCRIPTION
+	
+	Given a pointer to a procinfo struct, send a kill to
+	the ctl_fd in the appropriate way.  Returns 0 on failure,
+	1 on success.
+ */
+
+static void
+procfs_write_pckill (pi)
+  struct procinfo *pi;
+{
+#ifdef PROCFS_USE_READ_WRITE
+  struct proc_ctl pctl;
+  pctl.cmd = PCKILL;
+  pctl.data = SIGKILL;
+  write (pi->ctl_fd, &pctl, sizeof (struct proc_ctl));
+#else
+  int signo = SIGKILL;
+  ioctl (pi->ctl_fd, PIOCKILL, &signo);
+#endif
+}
+
+static struct procinfo *
+wait_fd ()
+{
+  struct procinfo *pi, *next_pi;
+#ifndef LOSING_POLL
+  int num_fds;
+  int i;
+#endif
+
+  set_sigint_trap ();	/* Causes SIGINT to be passed on to the
+			   attached process. */
+  set_sigio_trap ();
+
+ wait_again:
+#ifndef LOSING_POLL
+  while (1)
+    {
+      num_fds = poll (poll_list, num_poll_list, -1);
+      if (num_fds > 0)
+	break;
+      if (num_fds < 0 && errno == EINTR)
+	continue;
+      print_sys_errmsg ("poll failed", errno);
+      error ("Poll failed, returned %d", num_fds);
+    }
+#else /* LOSING_POLL */
+  pi = current_procinfo;
+
+  while (!procfs_write_pcwstop (pi))
+    {
+      if (errno == ENOENT)
+	{
+	  /* Process exited.  */
+	  pi->prstatus.pr_flags = 0;
+	  break;
+	}
+      else if (errno != EINTR)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("procfs_write_pcwstop failed");
+	}
+    }
+  pi->had_event = 1;
+#endif /* LOSING_POLL */
+  
+  clear_sigint_trap ();
+  clear_sigio_trap ();
+
+#ifndef LOSING_POLL
+
+  for (i = 0; i < num_poll_list && num_fds > 0; i++)
+    {
+      if (0 == (poll_list[i].revents & 
+		(POLLWRNORM | POLLPRI | POLLERR | POLLHUP | POLLNVAL)))
+	continue;
+      for (pi = procinfo_list; pi; pi = next_pi)
+	{
+	  next_pi = pi->next;
+	  if (poll_list[i].fd == pi->ctl_fd)
+	    {
+	      num_fds--;
+	      if ((poll_list[i].revents & POLLHUP) != 0	||
+		  !procfs_read_status(pi))
+		{ /* The LWP has apparently terminated.  */
+		  if (num_poll_list <= 1)
+		    {
+		      pi->prstatus.pr_flags = 0;
+		      pi->had_event = 1;
+		      break;
+		    }
+		  if (info_verbose)
+		    printf_filtered ("LWP %d exited.\n", 
+				     (pi->pid >> 16) & 0xffff);
+		  close_proc_file (pi);
+		  i--;			/* don't skip deleted entry */
+		  if (num_fds != 0)
+		    break;		/* already another event to process */
+		  else
+		    goto wait_again; 	/* wait for another event */
+		}
+	      pi->had_event = 1;
+	      break;
+	    }
+	}
+      if (!pi)
+	error ("wait_fd: Couldn't find procinfo for fd %d\n",
+	       poll_list[i].fd);
+    }
+#endif /* LOSING_POLL */
+
+  return pi;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	lookupdesc -- translate a value to a summary desc string
+
+SYNOPSIS
+
+	static char *lookupdesc (struct trans *transp, unsigned int val);
+
+DESCRIPTION
+	
+	Given a pointer to a translation table and a value to be translated,
+	lookup the desc string and return it.
+ */
+
+static char *
+lookupdesc (transp, val)
+     struct trans *transp;
+     unsigned int val;
+{
+  char *desc;
+  
+  for (desc = NULL; transp -> name != NULL; transp++)
+    {
+      if (transp -> value == val)
+	{
+	  desc = transp -> desc;
+	  break;
+	}
+    }
+
+  /* Didn't find a translation for the specified value, set a default one. */
+
+  if (desc == NULL)
+    {
+      desc = "Unknown";
+    }
+  return (desc);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	lookupname -- translate a value to symbolic name
+
+SYNOPSIS
+
+	static char *lookupname (struct trans *transp, unsigned int val,
+				 char *prefix);
+
+DESCRIPTION
+	
+	Given a pointer to a translation table, a value to be translated,
+	and a default prefix to return if the value can't be translated,
+	match the value with one of the translation table entries and
+	return a pointer to the symbolic name.
+
+	If no match is found it just returns the value as a printable string,
+	with the given prefix.  The previous such value, if any, is freed
+	at this time.
+ */
+
+static char *
+lookupname (transp, val, prefix)
+     struct trans *transp;
+     unsigned int val;
+     char *prefix;
+{
+  static char *locbuf;
+  char *name;
+  
+  for (name = NULL; transp -> name != NULL; transp++)
+    {
+      if (transp -> value == val)
+	{
+	  name = transp -> name;
+	  break;
+	}
+    }
+
+  /* Didn't find a translation for the specified value, build a default
+     one using the specified prefix and return it.  The lifetime of
+     the value is only until the next one is needed. */
+
+  if (name == NULL)
+    {
+      if (locbuf != NULL)
+	{
+	  free (locbuf);
+	}
+      locbuf = xmalloc (strlen (prefix) + 16);
+      sprintf (locbuf, "%s %u", prefix, val);
+      name = locbuf;
+    }
+  return (name);
+}
+
+static char *
+sigcodename (sip)
+     siginfo_t *sip;
+{
+  struct sigcode *scp;
+  char *name = NULL;
+  static char locbuf[32];
+  
+  for (scp = siginfo_table; scp -> codename != NULL; scp++)
+    {
+      if ((scp -> signo == sip -> si_signo) &&
+	  (scp -> code == sip -> si_code))
+	{
+	  name = scp -> codename;
+	  break;
+	}
+    }
+  if (name == NULL)
+    {
+      sprintf (locbuf, "sigcode %u", sip -> si_signo);
+      name = locbuf;
+    }
+  return (name);
+}
+
+static char *
+sigcodedesc (sip)
+     siginfo_t *sip;
+{
+  struct sigcode *scp;
+  char *desc = NULL;
+  
+  for (scp = siginfo_table; scp -> codename != NULL; scp++)
+    {
+      if ((scp -> signo == sip -> si_signo) &&
+	  (scp -> code == sip -> si_code))
+	{
+	  desc = scp -> desc;
+	  break;
+	}
+    }
+  if (desc == NULL)
+    {
+      desc = "Unrecognized signal or trap use";
+    }
+  return (desc);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	syscallname - translate a system call number into a system call name
+
+SYNOPSIS
+
+	char *syscallname (int syscallnum)
+
+DESCRIPTION
+
+	Given a system call number, translate it into the printable name
+	of a system call, or into "syscall <num>" if it is an unknown
+	number.
+ */
+
+static char *
+syscallname (syscallnum)
+     int syscallnum;
+{
+  static char locbuf[32];
+  
+  if (syscallnum >= 0 && syscallnum < MAX_SYSCALLS
+      && syscall_table[syscallnum] != NULL)
+    return syscall_table[syscallnum];
+  else
+    {
+      sprintf (locbuf, "syscall %u", syscallnum);
+      return locbuf;
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	init_syscall_table - initialize syscall translation table
+
+SYNOPSIS
+
+	void init_syscall_table (void)
+
+DESCRIPTION
+
+	Dynamically initialize the translation table to convert system
+	call numbers into printable system call names.  Done once per
+	gdb run, on initialization.
+
+NOTES
+
+	This is awfully ugly, but preprocessor tricks to make it prettier
+	tend to be nonportable.
+ */
+
+static void
+init_syscall_table ()
+{
+#if defined (SYS_exit)
+  syscall_table[SYS_exit] = "exit";
+#endif
+#if defined (SYS_fork)
+  syscall_table[SYS_fork] = "fork";
+#endif
+#if defined (SYS_read)
+  syscall_table[SYS_read] = "read";
+#endif
+#if defined (SYS_write)
+  syscall_table[SYS_write] = "write";
+#endif
+#if defined (SYS_open)
+  syscall_table[SYS_open] = "open";
+#endif
+#if defined (SYS_close)
+  syscall_table[SYS_close] = "close";
+#endif
+#if defined (SYS_wait)
+  syscall_table[SYS_wait] = "wait";
+#endif
+#if defined (SYS_creat)
+  syscall_table[SYS_creat] = "creat";
+#endif
+#if defined (SYS_link)
+  syscall_table[SYS_link] = "link";
+#endif
+#if defined (SYS_unlink)
+  syscall_table[SYS_unlink] = "unlink";
+#endif
+#if defined (SYS_exec)
+  syscall_table[SYS_exec] = "exec";
+#endif
+#if defined (SYS_execv)
+  syscall_table[SYS_execv] = "execv";
+#endif
+#if defined (SYS_execve)
+  syscall_table[SYS_execve] = "execve";
+#endif
+#if defined (SYS_chdir)
+  syscall_table[SYS_chdir] = "chdir";
+#endif
+#if defined (SYS_time)
+  syscall_table[SYS_time] = "time";
+#endif
+#if defined (SYS_mknod)
+  syscall_table[SYS_mknod] = "mknod";
+#endif
+#if defined (SYS_chmod)
+  syscall_table[SYS_chmod] = "chmod";
+#endif
+#if defined (SYS_chown)
+  syscall_table[SYS_chown] = "chown";
+#endif
+#if defined (SYS_brk)
+  syscall_table[SYS_brk] = "brk";
+#endif
+#if defined (SYS_stat)
+  syscall_table[SYS_stat] = "stat";
+#endif
+#if defined (SYS_lseek)
+  syscall_table[SYS_lseek] = "lseek";
+#endif
+#if defined (SYS_getpid)
+  syscall_table[SYS_getpid] = "getpid";
+#endif
+#if defined (SYS_mount)
+  syscall_table[SYS_mount] = "mount";
+#endif
+#if defined (SYS_umount)
+  syscall_table[SYS_umount] = "umount";
+#endif
+#if defined (SYS_setuid)
+  syscall_table[SYS_setuid] = "setuid";
+#endif
+#if defined (SYS_getuid)
+  syscall_table[SYS_getuid] = "getuid";
+#endif
+#if defined (SYS_stime)
+  syscall_table[SYS_stime] = "stime";
+#endif
+#if defined (SYS_ptrace)
+  syscall_table[SYS_ptrace] = "ptrace";
+#endif
+#if defined (SYS_alarm)
+  syscall_table[SYS_alarm] = "alarm";
+#endif
+#if defined (SYS_fstat)
+  syscall_table[SYS_fstat] = "fstat";
+#endif
+#if defined (SYS_pause)
+  syscall_table[SYS_pause] = "pause";
+#endif
+#if defined (SYS_utime)
+  syscall_table[SYS_utime] = "utime";
+#endif
+#if defined (SYS_stty)
+  syscall_table[SYS_stty] = "stty";
+#endif
+#if defined (SYS_gtty)
+  syscall_table[SYS_gtty] = "gtty";
+#endif
+#if defined (SYS_access)
+  syscall_table[SYS_access] = "access";
+#endif
+#if defined (SYS_nice)
+  syscall_table[SYS_nice] = "nice";
+#endif
+#if defined (SYS_statfs)
+  syscall_table[SYS_statfs] = "statfs";
+#endif
+#if defined (SYS_sync)
+  syscall_table[SYS_sync] = "sync";
+#endif
+#if defined (SYS_kill)
+  syscall_table[SYS_kill] = "kill";
+#endif
+#if defined (SYS_fstatfs)
+  syscall_table[SYS_fstatfs] = "fstatfs";
+#endif
+#if defined (SYS_pgrpsys)
+  syscall_table[SYS_pgrpsys] = "pgrpsys";
+#endif
+#if defined (SYS_xenix)
+  syscall_table[SYS_xenix] = "xenix";
+#endif
+#if defined (SYS_dup)
+  syscall_table[SYS_dup] = "dup";
+#endif
+#if defined (SYS_pipe)
+  syscall_table[SYS_pipe] = "pipe";
+#endif
+#if defined (SYS_times)
+  syscall_table[SYS_times] = "times";
+#endif
+#if defined (SYS_profil)
+  syscall_table[SYS_profil] = "profil";
+#endif
+#if defined (SYS_plock)
+  syscall_table[SYS_plock] = "plock";
+#endif
+#if defined (SYS_setgid)
+  syscall_table[SYS_setgid] = "setgid";
+#endif
+#if defined (SYS_getgid)
+  syscall_table[SYS_getgid] = "getgid";
+#endif
+#if defined (SYS_signal)
+  syscall_table[SYS_signal] = "signal";
+#endif
+#if defined (SYS_msgsys)
+  syscall_table[SYS_msgsys] = "msgsys";
+#endif
+#if defined (SYS_sys3b)
+  syscall_table[SYS_sys3b] = "sys3b";
+#endif
+#if defined (SYS_sysi86)
+  syscall_table[SYS_sysi86] = "sysi86";
+#endif
+#if defined (SYS_acct)
+  syscall_table[SYS_acct] = "acct";
+#endif
+#if defined (SYS_shmsys)
+  syscall_table[SYS_shmsys] = "shmsys";
+#endif
+#if defined (SYS_semsys)
+  syscall_table[SYS_semsys] = "semsys";
+#endif
+#if defined (SYS_ioctl)
+  syscall_table[SYS_ioctl] = "ioctl";
+#endif
+#if defined (SYS_uadmin)
+  syscall_table[SYS_uadmin] = "uadmin";
+#endif
+#if defined (SYS_utssys)
+  syscall_table[SYS_utssys] = "utssys";
+#endif
+#if defined (SYS_fsync)
+  syscall_table[SYS_fsync] = "fsync";
+#endif
+#if defined (SYS_umask)
+  syscall_table[SYS_umask] = "umask";
+#endif
+#if defined (SYS_chroot)
+  syscall_table[SYS_chroot] = "chroot";
+#endif
+#if defined (SYS_fcntl)
+  syscall_table[SYS_fcntl] = "fcntl";
+#endif
+#if defined (SYS_ulimit)
+  syscall_table[SYS_ulimit] = "ulimit";
+#endif
+#if defined (SYS_rfsys)
+  syscall_table[SYS_rfsys] = "rfsys";
+#endif
+#if defined (SYS_rmdir)
+  syscall_table[SYS_rmdir] = "rmdir";
+#endif
+#if defined (SYS_mkdir)
+  syscall_table[SYS_mkdir] = "mkdir";
+#endif
+#if defined (SYS_getdents)
+  syscall_table[SYS_getdents] = "getdents";
+#endif
+#if defined (SYS_sysfs)
+  syscall_table[SYS_sysfs] = "sysfs";
+#endif
+#if defined (SYS_getmsg)
+  syscall_table[SYS_getmsg] = "getmsg";
+#endif
+#if defined (SYS_putmsg)
+  syscall_table[SYS_putmsg] = "putmsg";
+#endif
+#if defined (SYS_poll)
+  syscall_table[SYS_poll] = "poll";
+#endif
+#if defined (SYS_lstat)
+  syscall_table[SYS_lstat] = "lstat";
+#endif
+#if defined (SYS_symlink)
+  syscall_table[SYS_symlink] = "symlink";
+#endif
+#if defined (SYS_readlink)
+  syscall_table[SYS_readlink] = "readlink";
+#endif
+#if defined (SYS_setgroups)
+  syscall_table[SYS_setgroups] = "setgroups";
+#endif
+#if defined (SYS_getgroups)
+  syscall_table[SYS_getgroups] = "getgroups";
+#endif
+#if defined (SYS_fchmod)
+  syscall_table[SYS_fchmod] = "fchmod";
+#endif
+#if defined (SYS_fchown)
+  syscall_table[SYS_fchown] = "fchown";
+#endif
+#if defined (SYS_sigprocmask)
+  syscall_table[SYS_sigprocmask] = "sigprocmask";
+#endif
+#if defined (SYS_sigsuspend)
+  syscall_table[SYS_sigsuspend] = "sigsuspend";
+#endif
+#if defined (SYS_sigaltstack)
+  syscall_table[SYS_sigaltstack] = "sigaltstack";
+#endif
+#if defined (SYS_sigaction)
+  syscall_table[SYS_sigaction] = "sigaction";
+#endif
+#if defined (SYS_sigpending)
+  syscall_table[SYS_sigpending] = "sigpending";
+#endif
+#if defined (SYS_context)
+  syscall_table[SYS_context] = "context";
+#endif
+#if defined (SYS_evsys)
+  syscall_table[SYS_evsys] = "evsys";
+#endif
+#if defined (SYS_evtrapret)
+  syscall_table[SYS_evtrapret] = "evtrapret";
+#endif
+#if defined (SYS_statvfs)
+  syscall_table[SYS_statvfs] = "statvfs";
+#endif
+#if defined (SYS_fstatvfs)
+  syscall_table[SYS_fstatvfs] = "fstatvfs";
+#endif
+#if defined (SYS_nfssys)
+  syscall_table[SYS_nfssys] = "nfssys";
+#endif
+#if defined (SYS_waitsys)
+  syscall_table[SYS_waitsys] = "waitsys";
+#endif
+#if defined (SYS_sigsendsys)
+  syscall_table[SYS_sigsendsys] = "sigsendsys";
+#endif
+#if defined (SYS_hrtsys)
+  syscall_table[SYS_hrtsys] = "hrtsys";
+#endif
+#if defined (SYS_acancel)
+  syscall_table[SYS_acancel] = "acancel";
+#endif
+#if defined (SYS_async)
+  syscall_table[SYS_async] = "async";
+#endif
+#if defined (SYS_priocntlsys)
+  syscall_table[SYS_priocntlsys] = "priocntlsys";
+#endif
+#if defined (SYS_pathconf)
+  syscall_table[SYS_pathconf] = "pathconf";
+#endif
+#if defined (SYS_mincore)
+  syscall_table[SYS_mincore] = "mincore";
+#endif
+#if defined (SYS_mmap)
+  syscall_table[SYS_mmap] = "mmap";
+#endif
+#if defined (SYS_mprotect)
+  syscall_table[SYS_mprotect] = "mprotect";
+#endif
+#if defined (SYS_munmap)
+  syscall_table[SYS_munmap] = "munmap";
+#endif
+#if defined (SYS_fpathconf)
+  syscall_table[SYS_fpathconf] = "fpathconf";
+#endif
+#if defined (SYS_vfork)
+  syscall_table[SYS_vfork] = "vfork";
+#endif
+#if defined (SYS_fchdir)
+  syscall_table[SYS_fchdir] = "fchdir";
+#endif
+#if defined (SYS_readv)
+  syscall_table[SYS_readv] = "readv";
+#endif
+#if defined (SYS_writev)
+  syscall_table[SYS_writev] = "writev";
+#endif
+#if defined (SYS_xstat)
+  syscall_table[SYS_xstat] = "xstat";
+#endif
+#if defined (SYS_lxstat)
+  syscall_table[SYS_lxstat] = "lxstat";
+#endif
+#if defined (SYS_fxstat)
+  syscall_table[SYS_fxstat] = "fxstat";
+#endif
+#if defined (SYS_xmknod)
+  syscall_table[SYS_xmknod] = "xmknod";
+#endif
+#if defined (SYS_clocal)
+  syscall_table[SYS_clocal] = "clocal";
+#endif
+#if defined (SYS_setrlimit)
+  syscall_table[SYS_setrlimit] = "setrlimit";
+#endif
+#if defined (SYS_getrlimit)
+  syscall_table[SYS_getrlimit] = "getrlimit";
+#endif
+#if defined (SYS_lchown)
+  syscall_table[SYS_lchown] = "lchown";
+#endif
+#if defined (SYS_memcntl)
+  syscall_table[SYS_memcntl] = "memcntl";
+#endif
+#if defined (SYS_getpmsg)
+  syscall_table[SYS_getpmsg] = "getpmsg";
+#endif
+#if defined (SYS_putpmsg)
+  syscall_table[SYS_putpmsg] = "putpmsg";
+#endif
+#if defined (SYS_rename)
+  syscall_table[SYS_rename] = "rename";
+#endif
+#if defined (SYS_uname)
+  syscall_table[SYS_uname] = "uname";
+#endif
+#if defined (SYS_setegid)
+  syscall_table[SYS_setegid] = "setegid";
+#endif
+#if defined (SYS_sysconfig)
+  syscall_table[SYS_sysconfig] = "sysconfig";
+#endif
+#if defined (SYS_adjtime)
+  syscall_table[SYS_adjtime] = "adjtime";
+#endif
+#if defined (SYS_systeminfo)
+  syscall_table[SYS_systeminfo] = "systeminfo";
+#endif
+#if defined (SYS_seteuid)
+  syscall_table[SYS_seteuid] = "seteuid";
+#endif
+#if defined (SYS_sproc)
+  syscall_table[SYS_sproc] = "sproc";
+#endif
+#if defined (SYS_keyctl)
+  syscall_table[SYS_keyctl] = "keyctl";
+#endif
+#if defined (SYS_secsys)
+  syscall_table[SYS_secsys] = "secsys";
+#endif
+#if defined (SYS_filepriv)
+  syscall_table[SYS_filepriv] = "filepriv";
+#endif
+#if defined (SYS_procpriv)
+  syscall_table[SYS_procpriv] = "procpriv";
+#endif
+#if defined (SYS_devstat)
+  syscall_table[SYS_devstat] = "devstat";
+#endif
+#if defined (SYS_aclipc)
+  syscall_table[SYS_aclipc] = "aclipc";
+#endif
+#if defined (SYS_fdevstat)
+  syscall_table[SYS_fdevstat] = "fdevstat";
+#endif
+#if defined (SYS_flvlfile)
+  syscall_table[SYS_flvlfile] = "flvlfile";
+#endif
+#if defined (SYS_lvlfile)
+  syscall_table[SYS_lvlfile] = "lvlfile";
+#endif
+#if defined (SYS_lvlequal)
+  syscall_table[SYS_lvlequal] = "lvlequal";
+#endif
+#if defined (SYS_lvlproc)
+  syscall_table[SYS_lvlproc] = "lvlproc";
+#endif
+#if defined (SYS_lvlipc)
+  syscall_table[SYS_lvlipc] = "lvlipc";
+#endif
+#if defined (SYS_acl)
+  syscall_table[SYS_acl] = "acl";
+#endif
+#if defined (SYS_auditevt)
+  syscall_table[SYS_auditevt] = "auditevt";
+#endif
+#if defined (SYS_auditctl)
+  syscall_table[SYS_auditctl] = "auditctl";
+#endif
+#if defined (SYS_auditdmp)
+  syscall_table[SYS_auditdmp] = "auditdmp";
+#endif
+#if defined (SYS_auditlog)
+  syscall_table[SYS_auditlog] = "auditlog";
+#endif
+#if defined (SYS_auditbuf)
+  syscall_table[SYS_auditbuf] = "auditbuf";
+#endif
+#if defined (SYS_lvldom)
+  syscall_table[SYS_lvldom] = "lvldom";
+#endif
+#if defined (SYS_lvlvfs)
+  syscall_table[SYS_lvlvfs] = "lvlvfs";
+#endif
+#if defined (SYS_mkmld)
+  syscall_table[SYS_mkmld] = "mkmld";
+#endif
+#if defined (SYS_mldmode)
+  syscall_table[SYS_mldmode] = "mldmode";
+#endif
+#if defined (SYS_secadvise)
+  syscall_table[SYS_secadvise] = "secadvise";
+#endif
+#if defined (SYS_online)
+  syscall_table[SYS_online] = "online";
+#endif
+#if defined (SYS_setitimer)
+  syscall_table[SYS_setitimer] = "setitimer";
+#endif
+#if defined (SYS_getitimer)
+  syscall_table[SYS_getitimer] = "getitimer";
+#endif
+#if defined (SYS_gettimeofday)
+  syscall_table[SYS_gettimeofday] = "gettimeofday";
+#endif
+#if defined (SYS_settimeofday)
+  syscall_table[SYS_settimeofday] = "settimeofday";
+#endif
+#if defined (SYS_lwp_create)
+  syscall_table[SYS_lwp_create] = "_lwp_create";
+#endif
+#if defined (SYS_lwp_exit)
+  syscall_table[SYS_lwp_exit] = "_lwp_exit";
+#endif
+#if defined (SYS_lwp_wait)
+  syscall_table[SYS_lwp_wait] = "_lwp_wait";
+#endif
+#if defined (SYS_lwp_self)
+  syscall_table[SYS_lwp_self] = "_lwp_self";
+#endif
+#if defined (SYS_lwp_info)
+  syscall_table[SYS_lwp_info] = "_lwp_info";
+#endif
+#if defined (SYS_lwp_private)
+  syscall_table[SYS_lwp_private] = "_lwp_private";
+#endif
+#if defined (SYS_processor_bind)
+  syscall_table[SYS_processor_bind] = "processor_bind";
+#endif
+#if defined (SYS_processor_exbind)
+  syscall_table[SYS_processor_exbind] = "processor_exbind";
+#endif
+#if defined (SYS_prepblock)
+  syscall_table[SYS_prepblock] = "prepblock";
+#endif
+#if defined (SYS_block)
+  syscall_table[SYS_block] = "block";
+#endif
+#if defined (SYS_rdblock)
+  syscall_table[SYS_rdblock] = "rdblock";
+#endif
+#if defined (SYS_unblock)
+  syscall_table[SYS_unblock] = "unblock";
+#endif
+#if defined (SYS_cancelblock)
+  syscall_table[SYS_cancelblock] = "cancelblock";
+#endif
+#if defined (SYS_pread)
+  syscall_table[SYS_pread] = "pread";
+#endif
+#if defined (SYS_pwrite)
+  syscall_table[SYS_pwrite] = "pwrite";
+#endif
+#if defined (SYS_truncate)
+  syscall_table[SYS_truncate] = "truncate";
+#endif
+#if defined (SYS_ftruncate)
+  syscall_table[SYS_ftruncate] = "ftruncate";
+#endif
+#if defined (SYS_lwp_kill)
+  syscall_table[SYS_lwp_kill] = "_lwp_kill";
+#endif
+#if defined (SYS_sigwait)
+  syscall_table[SYS_sigwait] = "sigwait";
+#endif
+#if defined (SYS_fork1)
+  syscall_table[SYS_fork1] = "fork1";
+#endif
+#if defined (SYS_forkall)
+  syscall_table[SYS_forkall] = "forkall";
+#endif
+#if defined (SYS_modload)
+  syscall_table[SYS_modload] = "modload";
+#endif
+#if defined (SYS_moduload)
+  syscall_table[SYS_moduload] = "moduload";
+#endif
+#if defined (SYS_modpath)
+  syscall_table[SYS_modpath] = "modpath";
+#endif
+#if defined (SYS_modstat)
+  syscall_table[SYS_modstat] = "modstat";
+#endif
+#if defined (SYS_modadm)
+  syscall_table[SYS_modadm] = "modadm";
+#endif
+#if defined (SYS_getksym)
+  syscall_table[SYS_getksym] = "getksym";
+#endif
+#if defined (SYS_lwp_suspend)
+  syscall_table[SYS_lwp_suspend] = "_lwp_suspend";
+#endif
+#if defined (SYS_lwp_continue)
+  syscall_table[SYS_lwp_continue] = "_lwp_continue";
+#endif
+#if defined (SYS_priocntllst)
+  syscall_table[SYS_priocntllst] = "priocntllst";
+#endif
+#if defined (SYS_sleep)
+  syscall_table[SYS_sleep] = "sleep";
+#endif
+#if defined (SYS_lwp_sema_wait)
+  syscall_table[SYS_lwp_sema_wait] = "_lwp_sema_wait";
+#endif
+#if defined (SYS_lwp_sema_post)
+  syscall_table[SYS_lwp_sema_post] = "_lwp_sema_post";
+#endif
+#if defined (SYS_lwp_sema_trywait)
+  syscall_table[SYS_lwp_sema_trywait] = "lwp_sema_trywait";
+#endif
+#if defined(SYS_fstatvfs64)
+  syscall_table[SYS_fstatvfs64] = "fstatvfs64";
+#endif
+#if defined(SYS_statvfs64)
+  syscall_table[SYS_statvfs64] = "statvfs64";
+#endif
+#if defined(SYS_ftruncate64)
+  syscall_table[SYS_ftruncate64] = "ftruncate64";
+#endif
+#if defined(SYS_truncate64)
+  syscall_table[SYS_truncate64] = "truncate64";
+#endif
+#if defined(SYS_getrlimit64)
+  syscall_table[SYS_getrlimit64] = "getrlimit64";
+#endif
+#if defined(SYS_setrlimit64)
+  syscall_table[SYS_setrlimit64] = "setrlimit64";
+#endif
+#if defined(SYS_lseek64)
+  syscall_table[SYS_lseek64] = "lseek64";
+#endif
+#if defined(SYS_mmap64)
+  syscall_table[SYS_mmap64] = "mmap64";
+#endif
+#if defined(SYS_pread64)
+  syscall_table[SYS_pread64] = "pread64";
+#endif
+#if defined(SYS_creat64)
+  syscall_table[SYS_creat64] = "creat64";
+#endif
+#if defined(SYS_dshmsys)
+  syscall_table[SYS_dshmsys] = "dshmsys";
+#endif
+#if defined(SYS_invlpg)
+  syscall_table[SYS_invlpg] = "invlpg";
+#endif
+#if defined(SYS_cg_ids)
+  syscall_table[SYS_cg_ids] = "cg_ids";
+#endif
+#if defined(SYS_cg_processors)
+  syscall_table[SYS_cg_processors] = "cg_processors";
+#endif
+#if defined(SYS_cg_info)
+  syscall_table[SYS_cg_info] = "cg_info";
+#endif
+#if defined(SYS_cg_bind)
+  syscall_table[SYS_cg_bind] = "cg_bind";
+#endif
+#if defined(SYS_cg_current)
+  syscall_table[SYS_cg_current] = "cg_current";
+#endif
+#if defined(SYS_cg_memloc)
+  syscall_table[SYS_cg_memloc] = "cg_memloc";
+#endif
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_kill_inferior - kill any currently inferior
+
+SYNOPSIS
+
+	void procfs_kill_inferior (void)
+
+DESCRIPTION
+
+	Kill any current inferior.
+
+NOTES
+
+	Kills even attached inferiors.  Presumably the user has already
+	been prompted that the inferior is an attached one rather than
+	one started by gdb.  (FIXME?)
+
+*/
+
+static void
+procfs_kill_inferior ()
+{
+  target_mourn_inferior ();
+}
+
+/*
+
+LOCAL FUNCTION
+
+	unconditionally_kill_inferior - terminate the inferior
+
+SYNOPSIS
+
+	static void unconditionally_kill_inferior (struct procinfo *)
+
+DESCRIPTION
+
+	Kill the specified inferior.
+
+NOTE
+
+	A possibly useful enhancement would be to first try sending
+	the inferior a terminate signal, politely asking it to commit
+	suicide, before we murder it (we could call that
+	politely_kill_inferior()).
+
+*/
+
+static void
+unconditionally_kill_inferior (pi)
+     struct procinfo *pi;
+{
+  int ppid;
+  struct proc_ctl pctl;
+  
+  ppid = pi->prstatus.pr_ppid;
+
+#ifdef PROCFS_NEED_CLEAR_CURSIG_FOR_KILL
+  /* Alpha OSF/1-3.x procfs needs a clear of the current signal
+     before the PIOCKILL, otherwise it might generate a corrupted core
+     file for the inferior.  */
+  ioctl (pi->ctl_fd, PIOCSSIG, NULL);
+#endif
+#ifdef PROCFS_NEED_PIOCSSIG_FOR_KILL
+  /* Alpha OSF/1-2.x procfs needs a PIOCSSIG call with a SIGKILL signal
+     to kill the inferior, otherwise it might remain stopped with a
+     pending SIGKILL.
+     We do not check the result of the PIOCSSIG, the inferior might have
+     died already.  */
+  {
+    struct siginfo newsiginfo;
+
+    memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
+    newsiginfo.si_signo = SIGKILL;
+    newsiginfo.si_code = 0;
+    newsiginfo.si_errno = 0;
+    newsiginfo.si_pid = getpid ();
+    newsiginfo.si_uid = getuid ();
+    ioctl (pi->ctl_fd, PIOCSSIG, &newsiginfo);
+  }
+#else /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+  procfs_write_pckill (pi);
+#endif /* PROCFS_NEED_PIOCSSIG_FOR_KILL */
+
+  close_proc_file (pi);
+
+/* Only wait() for our direct children.  Our grandchildren zombies are killed
+   by the death of their parents.  */
+
+  if (ppid == getpid())
+    wait ((int *) 0);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_xfer_memory -- copy data to or from inferior memory space
+
+SYNOPSIS
+
+	int procfs_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+		int dowrite, struct target_ops target)
+
+DESCRIPTION
+
+	Copy LEN bytes to/from inferior's memory starting at MEMADDR
+	from/to debugger memory starting at MYADDR.  Copy from inferior
+	if DOWRITE is zero or to inferior if DOWRITE is nonzero.
+  
+	Returns the length copied, which is either the LEN argument or
+	zero.  This xfer function does not do partial moves, since procfs_ops
+	doesn't allow memory operations to cross below us in the target stack
+	anyway.
+
+NOTES
+
+	The /proc interface makes this an almost trivial task.
+ */
+
+static int
+procfs_xfer_memory (memaddr, myaddr, len, dowrite, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int dowrite;
+     struct target_ops *target; /* ignored */
+{
+  int nbytes = 0;
+  struct procinfo *pi;
+
+  pi = current_procinfo;
+
+  if (lseek(pi->as_fd, (off_t) memaddr, SEEK_SET) == (off_t) memaddr)
+    {
+      if (dowrite)
+	{
+	  nbytes = write (pi->as_fd, myaddr, len);
+	}
+      else
+	{
+	  nbytes = read (pi->as_fd, myaddr, len);
+	}
+      if (nbytes < 0)
+	{
+	  nbytes = 0;
+	}
+    }
+  return (nbytes);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_store_registers -- copy register values back to inferior
+
+SYNOPSIS
+
+	void procfs_store_registers (int regno)
+
+DESCRIPTION
+
+	Store our current register values back into the inferior.  If
+	REGNO is -1 then store all the register, otherwise store just
+	the value specified by REGNO.
+
+NOTES
+
+	If we are storing only a single register, we first have to get all
+	the current values from the process, overwrite the desired register
+	in the gregset with the one we want from gdb's registers, and then
+	send the whole set back to the process.  For writing all the
+	registers, all we have to do is generate the gregset and send it to
+	the process.
+
+	Also note that the process has to be stopped on an event of interest
+	for this to work, which basically means that it has to have been
+	run under the control of one of the other /proc ioctl calls and not
+	ptrace.  Since we don't use ptrace anyway, we don't worry about this
+	fine point, but it is worth noting for future reference.
+
+	Gdb is confused about what this function is supposed to return.
+	Some versions return a value, others return nothing.  Some are
+	declared to return a value and actually return nothing.  Gdb ignores
+	anything returned.  (FIXME)
+
+ */
+
+static void
+procfs_store_registers (regno)
+     int regno;
+{
+  struct procinfo *pi;
+#ifdef PROCFS_USE_READ_WRITE
+  struct greg_ctl greg;
+  struct fpreg_ctl fpreg;
+#endif
+
+  pi = current_procinfo;
+
+#ifdef PROCFS_USE_READ_WRITE
+  if (regno != -1)
+    {
+      procfs_read_status (pi);
+      memcpy ((char *) &greg.gregset,
+         (char *) &pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs,
+         sizeof (gdb_gregset_t));
+    }
+  fill_gregset (&greg.gregset, regno);
+  greg.cmd = PCSREG;
+  write (pi->ctl_fd, &greg, sizeof (greg));
+#else /* PROCFS_USE_READ_WRITE */
+  if (regno != -1)
+    {
+      ioctl (pi->ctl_fd, PIOCGREG, &pi->gregset.gregset);
+    }
+  fill_gregset (&pi->gregset.gregset, regno);
+  ioctl (pi->ctl_fd, PIOCSREG, &pi->gregset.gregset);
+#endif /* PROCFS_USE_READ_WRITE */
+
+#if defined (FP0_REGNUM)
+
+  /* Now repeat everything using the floating point register set, if the
+     target has floating point hardware. Since we ignore the returned value,
+     we'll never know whether it worked or not anyway. */
+
+#ifdef PROCFS_USE_READ_WRITE
+  if (regno != -1)
+    {
+      procfs_read_status (pi);
+      memcpy ((char *) &fpreg.fpregset,
+          (char *) &pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs,
+          sizeof (gdb_fpregset_t));
+    }
+  fill_fpregset (&fpreg.fpregset, regno);
+  fpreg.cmd = PCSFPREG;
+  write (pi->ctl_fd, &fpreg, sizeof (fpreg));
+#else /* PROCFS_USE_READ_WRITE */
+  if (regno != -1)
+    {
+      ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset.fpregset);
+    }
+  fill_fpregset (&pi->fpregset.fpregset, regno);
+  ioctl (pi->ctl_fd, PIOCSFPREG, &pi->fpregset.fpregset);
+#endif /* PROCFS_USE_READ_WRITE */
+
+#endif	/* FP0_REGNUM */
+
+}
+
+/*
+
+LOCAL FUNCTION
+
+	init_procinfo - setup a procinfo struct and connect it to a process
+
+SYNOPSIS
+
+	struct procinfo * init_procinfo (int pid)
+
+DESCRIPTION
+
+	Allocate a procinfo structure, open the /proc file and then set up the
+	set of signals and faults that are to be traced.  Returns a pointer to
+	the new procinfo structure.  
+
+NOTES
+
+	If proc_init_failed ever gets called, control returns to the command
+	processing loop via the standard error handling code.
+
+ */
+
+static struct procinfo *
+init_procinfo (pid, kill)
+     int pid;
+     int kill;
+{
+  struct procinfo *pi = (struct procinfo *) 
+    xmalloc (sizeof (struct procinfo));
+  struct sig_ctl  sctl;
+  struct flt_ctl  fctl;
+
+  memset ((char *) pi, 0, sizeof (*pi));
+  if (!open_proc_file (pid, pi, O_RDWR, 1))
+    proc_init_failed (pi, "can't open process file", kill);
+
+  /* open_proc_file may modify pid.  */
+
+  pid = pi -> pid;
+
+  /* Add new process to process info list */
+
+  pi->next = procinfo_list;
+  procinfo_list = pi;
+
+  add_fd (pi);			/* Add to list for poll/select */
+
+  /*  Remember some things about the inferior that we will, or might, change
+      so that we can restore them when we detach. */
+#ifdef UNIXWARE
+  memcpy ((char *) &pi->saved_trace.sigset,
+	  (char *) &pi->prstatus.pr_sigtrace, sizeof (sigset_t));
+  memcpy ((char *) &pi->saved_fltset.fltset,
+	  (char *) &pi->prstatus.pr_flttrace, sizeof (fltset_t));
+  memcpy ((char *) &pi->saved_entryset.sysset,
+	  (char *) &pi->prstatus.pr_sysentry, sizeof (sysset_t));
+  memcpy ((char *) &pi->saved_exitset.sysset,
+	  (char *) &pi->prstatus.pr_sysexit, sizeof (sysset_t));
+
+  /* Set up trace and fault sets, as gdb expects them. */
+
+  prfillset (&sctl.sigset);
+  notice_signals (pi, &sctl);
+  prfillset (&fctl.fltset);
+  prdelset (&fctl.fltset, FLTPAGE);
+
+#else /* ! UNIXWARE */
+  ioctl (pi->ctl_fd, PIOCGTRACE, &pi->saved_trace.sigset);
+  ioctl (pi->ctl_fd, PIOCGHOLD, &pi->saved_sighold.sigset);
+  ioctl (pi->ctl_fd, PIOCGFAULT, &pi->saved_fltset.fltset);
+  ioctl (pi->ctl_fd, PIOCGENTRY, &pi->saved_entryset.sysset);
+  ioctl (pi->ctl_fd, PIOCGEXIT, &pi->saved_exitset.sysset);
+  
+  /* Set up trace and fault sets, as gdb expects them. */
+  
+  memset ((char *) &pi->prrun, 0, sizeof (pi->prrun));
+  prfillset (&pi->prrun.pr_trace);
+  procfs_notice_signals (pid);
+  prfillset (&pi->prrun.pr_fault);
+  prdelset (&pi->prrun.pr_fault, FLTPAGE);
+#ifdef PROCFS_DONT_TRACE_FAULTS
+  premptyset (&pi->prrun.pr_fault);
+#endif
+#endif /* UNIXWARE */
+
+  if (!procfs_read_status (pi))
+    proc_init_failed (pi, "procfs_read_status failed", kill);
+
+  return pi;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	create_procinfo - initialize access to a /proc entry
+
+SYNOPSIS
+
+	struct procinfo * create_procinfo (int pid)
+
+DESCRIPTION
+
+	Allocate a procinfo structure, open the /proc file and then set up the
+	set of signals and faults that are to be traced.  Returns a pointer to
+	the new procinfo structure.
+
+NOTES
+
+	If proc_init_failed ever gets called, control returns to the command
+	processing loop via the standard error handling code.
+
+ */
+
+static struct procinfo *
+create_procinfo (pid)
+     int pid;
+{
+  struct procinfo *pi;
+  struct sig_ctl  sctl;
+  struct flt_ctl  fctl;
+
+  pi = find_procinfo (pid, 1);
+  if (pi != NULL)
+    return pi;			/* All done!  It already exists */
+
+  pi = init_procinfo (pid, 1);
+
+#ifndef UNIXWARE
+/* A bug in Solaris (2.5 at least) causes PIOCWSTOP to hang on LWPs that are
+   already stopped, even if they all have PR_ASYNC set.  */
+  if (!(pi->prstatus.pr_flags & PR_STOPPED))
+#endif
+    if (!procfs_write_pcwstop (pi))
+      proc_init_failed (pi, "procfs_write_pcwstop failed", 1);
+
+#ifdef PROCFS_USE_READ_WRITE
+  fctl.cmd = PCSFAULT;
+  if (write (pi->ctl_fd, (char *) &fctl, sizeof (struct flt_ctl)) < 0)
+    proc_init_failed (pi, "PCSFAULT failed", 1);
+#else
+  if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->prrun.pr_fault) < 0)
+    proc_init_failed (pi, "PIOCSFAULT failed", 1);
+#endif
+
+  return pi;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_exit_handler - handle entry into the _exit syscall
+
+SYNOPSIS
+
+	int procfs_exit_handler (pi, syscall_num, why, rtnvalp, statvalp)
+
+DESCRIPTION
+
+	This routine is called when an inferior process enters the _exit()
+	system call.  It continues the process, and then collects the exit
+	status and pid which are returned in *statvalp and *rtnvalp.  After
+	that it returns non-zero to indicate that procfs_wait should wake up.
+
+NOTES
+	There is probably a better way to do this.
+
+ */
+
+static int
+procfs_exit_handler (pi, syscall_num, why, rtnvalp, statvalp)
+     struct procinfo *pi;
+     int syscall_num;
+     int why;
+     int *rtnvalp;
+     int *statvalp;
+{
+  struct procinfo *temp_pi, *next_pi;
+  struct proc_ctl pctl;
+
+#ifdef UNIXWARE
+  pctl.cmd = PCRUN;
+  pctl.data = PRCFAULT;
+#else
+  pi->prrun.pr_flags = PRCFAULT;
+#endif
+
+#ifdef PROCFS_USE_READ_WRITE
+  if (write (pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
+#else
+  if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+#endif
+    perror_with_name (pi->pathname);
+
+  if (attach_flag)
+    {
+      /* Claim it exited (don't call wait). */
+      if (info_verbose)
+	printf_filtered ("(attached process has exited)\n");
+      *statvalp = 0;
+      *rtnvalp  = inferior_pid;
+    }
+  else
+    {
+      *rtnvalp = wait (statvalp);
+      if (*rtnvalp >= 0)
+	*rtnvalp = pi->pid;
+    }
+
+  /* Close ALL open proc file handles,
+     except the one that called SYS_exit. */
+  for (temp_pi = procinfo_list; temp_pi; temp_pi = next_pi)
+    {
+      next_pi = temp_pi->next;
+      if (temp_pi == pi)
+	continue;		/* Handled below */
+      close_proc_file (temp_pi);
+    }
+  return 1;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_exec_handler - handle exit from the exec family of syscalls
+
+SYNOPSIS
+
+	int procfs_exec_handler (pi, syscall_num, why, rtnvalp, statvalp)
+
+DESCRIPTION
+
+	This routine is called when an inferior process is about to finish any
+	of the exec() family of	system calls.  It pretends that we got a
+	SIGTRAP (for compatibility with ptrace behavior), and returns non-zero
+	to tell procfs_wait to wake up.
+
+NOTES
+	This need for compatibility with ptrace is questionable.  In the
+	future, it shouldn't be necessary.
+
+ */
+
+static int
+procfs_exec_handler (pi, syscall_num, why, rtnvalp, statvalp)
+     struct procinfo *pi;
+     int syscall_num;
+     int why;
+     int *rtnvalp;
+     int *statvalp;
+{
+  *statvalp = (SIGTRAP << 8) | 0177;
+
+  return 1;
+}
+
+#if defined(SYS_sproc) && !defined(UNIXWARE)
+/* IRIX lwp creation system call */
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_sproc_handler - handle exit from the sproc syscall
+
+SYNOPSIS
+
+	int procfs_sproc_handler (pi, syscall_num, why, rtnvalp, statvalp)
+
+DESCRIPTION
+
+	This routine is called when an inferior process is about to finish an
+	sproc() system call.  This is the system call that IRIX uses to create
+	a lightweight process.  When the target process gets this event, we can
+	look at rval1 to find the new child processes ID, and create a new
+	procinfo struct from that.
+
+	After that, it pretends that we got a SIGTRAP, and returns non-zero
+	to tell procfs_wait to wake up.  Subsequently, wait_for_inferior gets
+	woken up, sees the new process and continues it.
+
+NOTES
+	We actually never see the child exiting from sproc because we will
+	shortly stop the child with PIOCSTOP, which is then registered as the
+	event of interest.
+ */
+
+static int
+procfs_sproc_handler (pi, syscall_num, why, rtnvalp, statvalp)
+     struct procinfo *pi;
+     int syscall_num;
+     int why;
+     int *rtnvalp;
+     int *statvalp;
+{
+/* We've just detected the completion of an sproc system call.  Now we need to
+   setup a procinfo struct for this thread, and notify the thread system of the
+   new arrival.  */
+
+/* If sproc failed, then nothing interesting happened.  Continue the process
+   and go back to sleep. */
+
+  if (pi->prstatus.pr_errno != 0)
+    {
+      pi->prrun.pr_flags &= PRSTEP;
+      pi->prrun.pr_flags |= PRCFAULT;
+
+      if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+	perror_with_name (pi->pathname);
+
+      return 0;
+    }
+
+  /* At this point, the new thread is stopped at it's first instruction, and
+     the parent is stopped at the exit from sproc.  */
+
+  /* Notify the caller of the arrival of a new thread. */
+  create_procinfo (pi->prstatus.pr_rval1);
+
+  *rtnvalp = pi->prstatus.pr_rval1;
+  *statvalp = (SIGTRAP << 8) | 0177;
+
+  return 1;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_fork_handler - handle exit from the fork syscall
+
+SYNOPSIS
+
+	int procfs_fork_handler (pi, syscall_num, why, rtnvalp, statvalp)
+
+DESCRIPTION
+
+	This routine is called when an inferior process is about to finish a
+	fork() system call.  We will open up the new process, and then close
+	it, which releases it from the clutches of the debugger.
+
+	After that, we continue the target process as though nothing had
+	happened.
+
+NOTES
+	This is necessary for IRIX because we have to set PR_FORK in order
+	to catch the creation of lwps (via sproc()).  When an actual fork
+	occurs, it becomes necessary to reset the forks debugger flags and
+	continue it because we can't hack multiple processes yet.
+ */
+
+static int
+procfs_fork_handler (pi, syscall_num, why, rtnvalp, statvalp)
+     struct procinfo *pi;
+     int syscall_num;
+     int why;
+     int *rtnvalp;
+     int *statvalp;
+{
+  struct procinfo *pitemp;
+
+/* At this point, we've detected the completion of a fork (or vfork) call in
+   our child.  The grandchild is also stopped because we set inherit-on-fork
+   earlier.  (Note that nobody has the grandchilds' /proc file open at this
+   point.)  We will release the grandchild from the debugger by opening it's
+   /proc file and then closing it.  Since run-on-last-close is set, the
+   grandchild continues on its' merry way.  */
+
+
+  pitemp = create_procinfo (pi->prstatus.pr_rval1);
+  if (pitemp)
+    close_proc_file (pitemp);
+
+  if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+    perror_with_name (pi->pathname);
+
+  return 0;
+}
+#endif /* SYS_sproc && !UNIXWARE */
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_set_inferior_syscall_traps - setup the syscall traps 
+
+SYNOPSIS
+
+	void procfs_set_inferior_syscall_traps (struct procinfo *pip)
+
+DESCRIPTION
+
+	Called for each "procinfo" (process, thread, or LWP) in the
+	inferior, to register for notification of and handlers for
+	syscall traps in the inferior.
+
+ */
+
+static void
+procfs_set_inferior_syscall_traps (pip)
+     struct procinfo *pip;
+{
+  procfs_set_syscall_trap (pip, SYS_exit, PROCFS_SYSCALL_ENTRY,
+			   procfs_exit_handler);
+
+#ifndef PRFS_STOPEXEC
+#ifdef SYS_exec
+  procfs_set_syscall_trap (pip, SYS_exec, PROCFS_SYSCALL_EXIT,
+			   procfs_exec_handler);
+#endif
+#ifdef SYS_execv
+  procfs_set_syscall_trap (pip, SYS_execv, PROCFS_SYSCALL_EXIT,
+			   procfs_exec_handler);
+#endif
+#ifdef SYS_execve
+  procfs_set_syscall_trap (pip, SYS_execve, PROCFS_SYSCALL_EXIT,
+			   procfs_exec_handler);
+#endif
+#endif  /* PRFS_STOPEXEC */
+
+  /* Setup traps on exit from sproc() */
+
+#ifdef SYS_sproc
+  procfs_set_syscall_trap (pip, SYS_sproc, PROCFS_SYSCALL_EXIT,
+			   procfs_sproc_handler);
+  procfs_set_syscall_trap (pip, SYS_fork, PROCFS_SYSCALL_EXIT,
+			   procfs_fork_handler);
+#ifdef SYS_vfork
+  procfs_set_syscall_trap (pip, SYS_vfork, PROCFS_SYSCALL_EXIT,
+			   procfs_fork_handler);
+#endif
+/* Turn on inherit-on-fork flag so that all children of the target process
+   start with tracing flags set.  This allows us to trap lwp creation.  Note
+   that we also have to trap on fork and vfork in order to disable all tracing
+   in the targets child processes.  */
+
+  modify_inherit_on_fork_flag (pip->ctl_fd, 1);
+#endif
+
+#ifdef SYS_lwp_create
+  procfs_set_syscall_trap (pip, SYS_lwp_create, PROCFS_SYSCALL_EXIT,
+			   procfs_lwp_creation_handler);
+#endif
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_init_inferior - initialize target vector and access to a
+	/proc entry
+
+SYNOPSIS
+
+	void procfs_init_inferior (int pid)
+
+DESCRIPTION
+
+	When gdb starts an inferior, this function is called in the parent
+	process immediately after the fork.  It waits for the child to stop
+	on the return from the exec system call (the child itself takes care
+	of ensuring that this is set up), then sets up the set of signals
+	and faults that are to be traced.  Returns the pid, which may have had
+	the thread-id added to it.
+
+NOTES
+
+	If proc_init_failed ever gets called, control returns to the command
+	processing loop via the standard error handling code.
+
+ */
+
+static void 
+procfs_init_inferior (pid)
+     int pid;
+{
+  struct procinfo *pip;
+
+  push_target (&procfs_ops);
+
+  pip = create_procinfo (pid);
+
+  procfs_set_inferior_syscall_traps (pip);
+
+  /* create_procinfo may change the pid, so we have to update inferior_pid
+     here before calling other gdb routines that need the right pid.  */
+
+  pid = pip -> pid;
+  inferior_pid = pid;
+
+  add_thread (pip -> pid);	/* Setup initial thread */
+
+#ifdef START_INFERIOR_TRAPS_EXPECTED
+  startup_inferior (START_INFERIOR_TRAPS_EXPECTED);
+#else
+  /* One trap to exec the shell, one to exec the program being debugged.  */
+  startup_inferior (2);
+#endif
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	procfs_notice_signals
+
+SYNOPSIS
+
+	static void procfs_notice_signals (int pid);
+
+DESCRIPTION
+
+	When the user changes the state of gdb's signal handling via the
+	"handle" command, this function gets called to see if any change
+	in the /proc interface is required.  It is also called internally
+	by other /proc interface functions to initialize the state of
+	the traced signal set.
+
+	One thing it does is that signals for which the state is "nostop",
+	"noprint", and "pass", have their trace bits reset in the pr_trace
+	field, so that they are no longer traced.  This allows them to be
+	delivered directly to the inferior without the debugger ever being
+	involved.
+ */
+
+static void
+procfs_notice_signals (pid)
+     int pid;
+{
+  struct procinfo *pi;
+  struct sig_ctl  sctl;
+
+  pi = find_procinfo (pid, 0);
+
+#ifndef HAVE_PRRUN_T
+  premptyset (&sctl.sigset);
+#else
+  sctl.sigset = pi->prrun.pr_trace;
+#endif
+
+  notice_signals (pi, &sctl);
+
+#ifdef HAVE_PRRUN_T
+  pi->prrun.pr_trace = sctl.sigset;
+#endif
+}
+
+static void
+notice_signals (pi, sctl)
+	struct procinfo *pi;
+	struct sig_ctl *sctl;
+{
+  int signo;
+
+  for (signo = 0; signo < NSIG; signo++)
+    {
+      if (signal_stop_state (target_signal_from_host (signo)) == 0 &&
+	  signal_print_state (target_signal_from_host (signo)) == 0 &&
+	  signal_pass_state (target_signal_from_host (signo)) == 1)
+	{
+	  prdelset (&sctl->sigset, signo);
+	}
+      else
+	{
+	  praddset (&sctl->sigset, signo);
+	}
+    }
+#ifdef PROCFS_USE_READ_WRITE
+  sctl->cmd = PCSTRACE;
+  if (write (pi->ctl_fd, (char *) sctl, sizeof (struct sig_ctl)) < 0)
+#else
+  if (ioctl (pi->ctl_fd, PIOCSTRACE, &sctl->sigset))
+#endif
+    {
+      print_sys_errmsg ("PIOCSTRACE failed", errno);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	proc_set_exec_trap -- arrange for exec'd child to halt at startup
+
+SYNOPSIS
+
+	void proc_set_exec_trap (void)
+
+DESCRIPTION
+
+	This function is called in the child process when starting up
+	an inferior, prior to doing the exec of the actual inferior.
+	It sets the child process's exitset to make exit from the exec
+	system call an event of interest to stop on, and then simply
+	returns.  The child does the exec, the system call returns, and
+	the child stops at the first instruction, ready for the gdb
+	parent process to take control of it.
+
+NOTE
+
+	We need to use all local variables since the child may be sharing
+	it's data space with the parent, if vfork was used rather than
+	fork.
+
+	Also note that we want to turn off the inherit-on-fork flag in
+	the child process so that any grand-children start with all
+	tracing flags cleared.
+ */
+
+static void
+proc_set_exec_trap ()
+{
+  struct sys_ctl exitset;
+  struct sys_ctl entryset;
+  char procname[MAX_PROC_NAME_SIZE];
+  int fd;
+  
+  sprintf (procname, CTL_PROC_NAME_FMT, getpid ());
+#ifdef UNIXWARE
+  if ((fd = open (procname, O_WRONLY)) < 0)
+#else
+  if ((fd = open (procname, O_RDWR)) < 0)
+#endif
+    {
+      perror (procname);
+      gdb_flush (gdb_stderr);
+      _exit (127);
+    }
+  premptyset (&exitset.sysset);
+  premptyset (&entryset.sysset);
+
+#ifdef PRFS_STOPEXEC
+  /* Under Alpha OSF/1 we have to use a PIOCSSPCACT ioctl to trace
+     exits from exec system calls because of the user level loader.  */
+  {
+    int prfs_flags;
+
+    if (ioctl (fd, PIOCGSPCACT, &prfs_flags) < 0)
+      {
+	perror (procname);
+	gdb_flush (gdb_stderr);
+	_exit (127);
+      }
+    prfs_flags |= PRFS_STOPEXEC;
+    if (ioctl (fd, PIOCSSPCACT, &prfs_flags) < 0)
+      {
+	perror (procname);
+	gdb_flush (gdb_stderr);
+	_exit (127);
+      }
+  }
+#else /* PRFS_STOPEXEC */
+  /* GW: Rationale...
+     Not all systems with /proc have all the exec* syscalls with the same
+     names.  On the SGI, for example, there is no SYS_exec, but there
+     *is* a SYS_execv.  So, we try to account for that. */
+
+#ifdef SYS_exec
+  praddset (&exitset.sysset, SYS_exec);
+#endif
+#ifdef SYS_execve
+  praddset (&exitset.sysset, SYS_execve);
+#endif
+#ifdef SYS_execv
+  praddset (&exitset.sysset, SYS_execv);
+#endif
+
+#ifdef PROCFS_USE_READ_WRITE
+  exitset.cmd = PCSEXIT;
+  if (write (fd, (char *) &exitset, sizeof (struct sys_ctl)) < 0)
+#else
+  if (ioctl (fd, PIOCSEXIT, &exitset.sysset) < 0)
+#endif
+    {
+      perror (procname);
+      gdb_flush (gdb_stderr);
+      _exit (127);
+    }
+#endif /* PRFS_STOPEXEC */
+
+  praddset (&entryset.sysset, SYS_exit);
+
+#ifdef PROCFS_USE_READ_WRITE
+  entryset.cmd = PCSENTRY;
+  if (write (fd, (char *) &entryset, sizeof (struct sys_ctl)) < 0)
+#else
+  if (ioctl (fd, PIOCSENTRY, &entryset.sysset) < 0)
+#endif
+    {
+      perror (procname);
+      gdb_flush (gdb_stderr);
+      _exit (126);
+    }
+
+  /* Turn off inherit-on-fork flag so that all grand-children of gdb
+     start with tracing flags cleared. */
+
+  modify_inherit_on_fork_flag (fd, 0);
+
+  /* Turn on run-on-last-close flag so that this process will not hang
+     if GDB goes away for some reason.  */
+
+  modify_run_on_last_close_flag (fd, 1);
+
+#ifndef UNIXWARE	/* since this is a solaris-ism, we don't want it */
+			/* NOTE: revisit when doing thread support for UW */
+#ifdef PR_ASYNC
+  {
+    long pr_flags;
+    struct proc_ctl pctl;
+
+/* Solaris needs this to make procfs treat all threads seperately.  Without
+   this, all threads halt whenever something happens to any thread.  Since
+   GDB wants to control all this itself, it needs to set PR_ASYNC.  */
+
+    pr_flags = PR_ASYNC;
+#ifdef PROCFS_USE_READ_WRITE
+    pctl.cmd = PCSET;
+    pctl.data = PR_FORK|PR_ASYNC;
+    write (fd, (char *) &pctl, sizeof (struct proc_ctl));
+#else
+    ioctl (fd, PIOCSET, &pr_flags);
+#endif
+  }
+#endif	/* PR_ASYNC */
+#endif	/* !UNIXWARE */
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	proc_iterate_over_mappings -- call function for every mapped space
+
+SYNOPSIS
+
+	int proc_iterate_over_mappings (int (*func)())
+
+DESCRIPTION
+
+	Given a pointer to a function, call that function for every
+	mapped address space, passing it an open file descriptor for
+	the file corresponding to that mapped address space (if any)
+	and the base address of the mapped space.  Quit when we hit
+	the end of the mappings or the function returns nonzero.
+ */
+
+#ifdef UNIXWARE
+int
+proc_iterate_over_mappings (func)
+     int (*func) PARAMS ((int, CORE_ADDR));
+{
+  int nmap;
+  int fd;
+  int funcstat = 0;
+  prmap_t *prmaps;
+  prmap_t *prmap;
+  struct procinfo *pi;
+  struct stat sbuf;
+
+  pi = current_procinfo;
+
+  if (fstat (pi->map_fd, &sbuf) < 0)
+    return 0;
+
+  nmap = sbuf.st_size / sizeof (prmap_t);
+  prmaps = (prmap_t *) alloca (nmap * sizeof(prmap_t));
+  if ((lseek (pi->map_fd, 0, SEEK_SET) == 0) &&
+	(read (pi->map_fd, (char *) prmaps, nmap * sizeof (prmap_t)) ==
+	(nmap * sizeof (prmap_t))))
+    {
+      int i = 0;
+      for (prmap = prmaps; i < nmap && funcstat == 0; ++prmap, ++i)
+        {
+          char name[sizeof ("/proc/1234567890/object") +
+		sizeof (prmap->pr_mapname)];
+          sprintf (name, "/proc/%d/object/%s", pi->pid, prmap->pr_mapname);
+          if ((fd = open (name, O_RDONLY)) == -1)
+            {
+              funcstat = 1;
+              break;
+            }
+          funcstat = (*func) (fd, (CORE_ADDR) prmap->pr_vaddr);
+          close (fd);
+        }
+    }
+  return (funcstat);
+}
+#else /* UNIXWARE */
+int
+proc_iterate_over_mappings (func)
+     int (*func) PARAMS ((int, CORE_ADDR));
+{
+  int nmap;
+  int fd;
+  int funcstat = 0;
+  struct prmap *prmaps;
+  struct prmap *prmap;
+  struct procinfo *pi;
+
+  pi = current_procinfo;
+
+  if (ioctl (pi->map_fd, PIOCNMAP, &nmap) == 0)
+    {
+      prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
+      if (ioctl (pi->map_fd, PIOCMAP, prmaps) == 0)
+	{
+	  for (prmap = prmaps; prmap -> pr_size && funcstat == 0; ++prmap)
+	    {
+	      fd = proc_address_to_fd (pi, (CORE_ADDR) prmap -> pr_vaddr, 0);
+	      funcstat = (*func) (fd, (CORE_ADDR) prmap -> pr_vaddr);
+	      close (fd);
+	    }
+	}
+    }
+  return (funcstat);
+}
+#endif /* UNIXWARE */
+
+#if 0	/* Currently unused */
+/*
+
+GLOBAL FUNCTION
+
+	proc_base_address -- find base address for segment containing address
+
+SYNOPSIS
+
+	CORE_ADDR proc_base_address (CORE_ADDR addr)
+
+DESCRIPTION
+
+	Given an address of a location in the inferior, find and return
+	the base address of the mapped segment containing that address.
+
+	This is used for example, by the shared library support code,
+	where we have the pc value for some location in the shared library
+	where we are stopped, and need to know the base address of the
+	segment containing that address.
+*/
+
+CORE_ADDR
+proc_base_address (addr)
+     CORE_ADDR addr;
+{
+  int nmap;
+  struct prmap *prmaps;
+  struct prmap *prmap;
+  CORE_ADDR baseaddr = 0;
+  struct procinfo *pi;
+
+  pi = current_procinfo;
+
+  if (ioctl (pi->map_fd, PIOCNMAP, &nmap) == 0)
+    {
+      prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
+      if (ioctl (pi->map_fd, PIOCMAP, prmaps) == 0)
+	{
+	  for (prmap = prmaps; prmap -> pr_size; ++prmap)
+	    {
+	      if ((prmap -> pr_vaddr <= (caddr_t) addr) &&
+		  (prmap -> pr_vaddr + prmap -> pr_size > (caddr_t) addr))
+		{
+		  baseaddr = (CORE_ADDR) prmap -> pr_vaddr;
+		  break;
+		}
+	    }
+	}
+    }
+  return (baseaddr);
+}
+
+#endif	/* 0 */
+
+#ifndef UNIXWARE
+/*
+
+LOCAL FUNCTION
+
+	proc_address_to_fd -- return open fd for file mapped to address
+
+SYNOPSIS
+
+	int proc_address_to_fd (struct procinfo *pi, CORE_ADDR addr, complain)
+
+DESCRIPTION
+
+	Given an address in the current inferior's address space, use the
+	/proc interface to find an open file descriptor for the file that
+	this address was mapped in from.  Return -1 if there is no current
+	inferior.  Print a warning message if there is an inferior but
+	the address corresponds to no file (IE a bogus address).
+
+*/
+
+static int
+proc_address_to_fd (pi, addr, complain)
+     struct procinfo *pi;
+     CORE_ADDR addr;
+     int complain;
+{
+  int fd = -1;
+
+  if ((fd = ioctl (pi->ctl_fd, PIOCOPENM, (caddr_t *) &addr)) < 0)
+    {
+      if (complain)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  warning ("can't find mapped file for address 0x%x", addr);
+	}
+    }
+  return (fd);
+}
+#endif /* !UNIXWARE */
+
+/* Attach to process PID, then initialize for debugging it
+   and wait for the trace-trap that results from attaching.  */
+
+static void
+procfs_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *exec_file;
+  int pid;
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+  pid = atoi (args);
+
+  if (pid == getpid())		/* Trying to masturbate? */
+    error ("I refuse to debug myself!");
+
+  if (from_tty)
+    {
+      exec_file = (char *) get_exec_file (0);
+
+      if (exec_file)
+	printf_unfiltered ("Attaching to program `%s', %s\n", exec_file, target_pid_to_str (pid));
+      else
+	printf_unfiltered ("Attaching to %s\n", target_pid_to_str (pid));
+
+      gdb_flush (gdb_stdout);
+    }
+
+  inferior_pid = pid = do_attach (pid);
+  push_target (&procfs_ops);
+}
+
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via the normal ptrace (PTRACE_TRACEME).  */
+
+static void
+procfs_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int siggnal = 0;
+
+  if (from_tty)
+    {
+      char *exec_file = get_exec_file (0);
+      if (exec_file == 0)
+	exec_file = "";
+      printf_unfiltered ("Detaching from program: %s %s\n",
+	      exec_file, target_pid_to_str (inferior_pid));
+      gdb_flush (gdb_stdout);
+    }
+  if (args)
+    siggnal = atoi (args);
+  
+  do_detach (siggnal);
+  inferior_pid = 0;
+  unpush_target (&procfs_ops);		/* Pop out of handling an inferior */
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+procfs_prepare_to_store ()
+{
+#ifdef CHILD_PREPARE_TO_STORE
+  CHILD_PREPARE_TO_STORE ();
+#endif
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+procfs_files_info (ignore)
+     struct target_ops *ignore;
+{
+  printf_unfiltered ("\tUsing the running image of %s %s via /proc.\n",
+	  attach_flag? "attached": "child", target_pid_to_str (inferior_pid));
+}
+
+/* ARGSUSED */
+static void
+procfs_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Unix child process.");
+}
+
+/*
+
+LOCAL FUNCTION
+
+	do_attach -- attach to an already existing process
+
+SYNOPSIS
+
+	int do_attach (int pid)
+
+DESCRIPTION
+
+	Attach to an already existing process with the specified process
+	id.  If the process is not already stopped, query whether to
+	stop it or not.
+
+NOTES
+
+	The option of stopping at attach time is specific to the /proc
+	versions of gdb.  Versions using ptrace force the attachee
+	to stop.  (I have changed this version to do so, too.  All you
+	have to do is "continue" to make it go on. -- gnu@cygnus.com)
+
+*/
+
+static int
+do_attach (pid)
+     int pid;
+{
+  struct procinfo *pi;
+  struct sig_ctl sctl;
+  struct flt_ctl fctl;
+  int nlwp, *lwps;
+
+  pi  = init_procinfo (pid, 0);
+
+#ifdef PIOCLWPIDS
+  nlwp = pi->prstatus.pr_nlwp;
+  lwps = alloca ((2 * nlwp + 2) * sizeof (id_t));
+
+  if (ioctl (pi->ctl_fd, PIOCLWPIDS, lwps))
+    {
+      print_sys_errmsg (pi -> pathname, errno);
+      error ("PIOCLWPIDS failed");
+    }
+#else /* PIOCLWPIDS */
+  nlwp = 1;
+  lwps = alloca ((2 * nlwp + 2) * sizeof *lwps);
+  lwps[0] = 0;
+#endif
+  for (; nlwp > 0; nlwp--, lwps++)
+    {
+      /* First one has already been created above.  */
+      if ((pi = find_procinfo ((*lwps << 16) | pid, 1)) == 0)
+	pi = init_procinfo ((*lwps << 16) | pid, 0);
+
+      if (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP))
+	{
+	  pi->was_stopped = 1;
+	}
+      else
+	{
+	  pi->was_stopped = 0;
+	  if (1 || query ("Process is currently running, stop it? "))
+	    {
+	      long cmd;
+	      /* Make it run again when we close it.  */
+	      modify_run_on_last_close_flag (pi->ctl_fd, 1);
+#ifdef PROCFS_USE_READ_WRITE
+	      cmd = PCSTOP;
+	      if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+#else
+	      if (ioctl (pi->ctl_fd, PIOCSTOP, &pi->prstatus) < 0)
+#endif
+		{
+		  print_sys_errmsg (pi->pathname, errno);
+		  close_proc_file (pi);
+		  error ("PIOCSTOP failed");
+		}
+#ifdef UNIXWARE
+	      if (!procfs_read_status (pi))
+		{
+		  print_sys_errmsg (pi->pathname, errno);
+		  close_proc_file (pi);
+		  error ("procfs_read_status failed");
+		} 
+#endif
+	      pi->nopass_next_sigstop = 1;
+	    }
+	  else
+	    {
+	      printf_unfiltered ("Ok, gdb will wait for %s to stop.\n", 
+				 target_pid_to_str (pi->pid));
+	    }
+	}
+
+#ifdef PROCFS_USE_READ_WRITE
+      fctl.cmd = PCSFAULT;
+      if (write (pi->ctl_fd, (char *) &fctl, sizeof (struct flt_ctl)) < 0)
+	print_sys_errmsg ("PCSFAULT failed", errno);
+#else /* PROCFS_USE_READ_WRITE */
+      if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->prrun.pr_fault))
+	{
+	  print_sys_errmsg ("PIOCSFAULT failed", errno);
+	}
+      if (ioctl (pi->ctl_fd, PIOCSTRACE, &pi->prrun.pr_trace))
+	{
+	  print_sys_errmsg ("PIOCSTRACE failed", errno);
+	}
+      add_thread (pi->pid);
+      procfs_set_inferior_syscall_traps (pi);
+#endif /* PROCFS_USE_READ_WRITE */
+    }
+  attach_flag = 1;
+  return (pi->pid);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	do_detach -- detach from an attached-to process
+
+SYNOPSIS
+
+	void do_detach (int signal)
+
+DESCRIPTION
+
+	Detach from the current attachee.
+
+	If signal is non-zero, the attachee is started running again and sent
+	the specified signal.
+
+	If signal is zero and the attachee was not already stopped when we
+	attached to it, then we make it runnable again when we detach.
+
+	Otherwise, we query whether or not to make the attachee runnable
+	again, since we may simply want to leave it in the state it was in
+	when we attached.
+
+	We report any problems, but do not consider them errors, since we
+	MUST detach even if some things don't seem to go right.  This may not
+	be the ideal situation.  (FIXME).
+ */
+
+static void
+do_detach (signal)
+     int signal;
+{
+  struct procinfo *pi;
+
+  for (pi = procinfo_list; pi; pi = pi->next)
+    {
+      if (signal)
+	{
+	  set_proc_siginfo (pi, signal);
+	}
+#ifdef PROCFS_USE_READ_WRITE
+      pi->saved_exitset.cmd = PCSEXIT;
+      if (write (pi->ctl_fd, (char *) &pi->saved_exitset,
+		 sizeof (struct sys_ctl)) < 0)
+#else
+	if (ioctl (pi->ctl_fd, PIOCSEXIT, &pi->saved_exitset.sysset) < 0)
+#endif
+	  {
+	    print_sys_errmsg (pi->pathname, errno);
+	    printf_unfiltered ("PIOCSEXIT failed.\n");
+	  }
+#ifdef PROCFS_USE_READ_WRITE
+      pi->saved_entryset.cmd = PCSENTRY;
+      if (write (pi->ctl_fd, (char *) &pi->saved_entryset,
+		 sizeof (struct sys_ctl)) < 0)
+#else
+	if (ioctl (pi->ctl_fd, PIOCSENTRY, &pi->saved_entryset.sysset) < 0)
+#endif
+	  {
+	    print_sys_errmsg (pi->pathname, errno);
+	    printf_unfiltered ("PIOCSENTRY failed.\n");
+	  }
+#ifdef PROCFS_USE_READ_WRITE
+      pi->saved_trace.cmd = PCSTRACE;
+      if (write (pi->ctl_fd, (char *) &pi->saved_trace,
+		 sizeof (struct sig_ctl)) < 0)
+#else
+	if (ioctl (pi->ctl_fd, PIOCSTRACE, &pi->saved_trace.sigset) < 0)
+#endif
+	  {
+	    print_sys_errmsg (pi->pathname, errno);
+	    printf_unfiltered ("PIOCSTRACE failed.\n");
+	  }
+#ifndef UNIXWARE
+      if (ioctl (pi->ctl_fd, PIOCSHOLD, &pi->saved_sighold.sigset) < 0)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  printf_unfiltered ("PIOSCHOLD failed.\n");
+	}
+#endif
+#ifdef PROCFS_USE_READ_WRITE
+      pi->saved_fltset.cmd = PCSFAULT;
+      if (write (pi->ctl_fd, (char *) &pi->saved_fltset,
+		 sizeof (struct flt_ctl)) < 0)
+#else
+      if (ioctl (pi->ctl_fd, PIOCSFAULT, &pi->saved_fltset.fltset) < 0)
+#endif
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  printf_unfiltered ("PIOCSFAULT failed.\n");
+	}
+      if (!procfs_read_status (pi))
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  printf_unfiltered ("procfs_read_status failed.\n");
+	}
+      else
+	{
+	  if (signal
+	  || (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)))
+	    {
+	      long cmd;
+	      struct proc_ctl pctl;
+
+	      if (signal || !pi->was_stopped ||
+		  query ("Was stopped when attached, make it runnable again? "))
+		{
+		  /* Clear any pending signal if we want to detach without
+		     a signal.  */
+		  if (signal == 0)
+		    set_proc_siginfo (pi, signal);
+
+		  /* Clear any fault that might have stopped it.  */
+#ifdef PROCFS_USE_READ_WRITE
+		  cmd = PCCFAULT;
+		  if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+#else
+		  if (ioctl (pi->ctl_fd, PIOCCFAULT, 0))
+#endif
+		    {
+		      print_sys_errmsg (pi->pathname, errno);
+		      printf_unfiltered ("PIOCCFAULT failed.\n");
+		    }
+
+		  /* Make it run again when we close it.  */
+
+		  modify_run_on_last_close_flag (pi->ctl_fd, 1);
+		}
+	    }
+	}
+      close_proc_file (pi);
+    }
+  attach_flag = 0;
+}
+
+/*  emulate wait() as much as possible.
+    Wait for child to do something.  Return pid of child, or -1 in case
+    of error; store status in *OURSTATUS.
+
+    Not sure why we can't
+    just use wait(), but it seems to have problems when applied to a
+    process being controlled with the /proc interface.
+
+    We have a race problem here with no obvious solution.  We need to let
+    the inferior run until it stops on an event of interest, which means
+    that we need to use the PIOCWSTOP ioctl.  However, we cannot use this
+    ioctl if the process is already stopped on something that is not an
+    event of interest, or the call will hang indefinitely.  Thus we first
+    use PIOCSTATUS to see if the process is not stopped.  If not, then we
+    use PIOCWSTOP.  But during the window between the two, if the process
+    stops for any reason that is not an event of interest (such as a job
+    control signal) then gdb will hang.  One possible workaround is to set
+    an alarm to wake up every minute of so and check to see if the process
+    is still running, and if so, then reissue the PIOCWSTOP.  But this is
+    a real kludge, so has not been implemented.  FIXME: investigate
+    alternatives.
+
+    FIXME:  Investigate why wait() seems to have problems with programs
+    being control by /proc routines.  */
+static int
+procfs_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  short what;
+  short why;
+  int statval = 0;
+  int checkerr = 0;
+  int rtnval = -1;
+  struct procinfo *pi;
+  struct proc_ctl pctl;
+
+scan_again:
+
+  /* handle all syscall events first, otherwise we might not
+     notice a thread was created until too late. */
+
+  for (pi = procinfo_list; pi; pi = pi->next)
+    {
+      if (!pi->had_event)
+	continue;
+
+      if (! (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)) )
+	continue;
+
+      why = THE_PR_LWP(pi->prstatus).pr_why;
+      what = THE_PR_LWP(pi->prstatus).pr_what;
+      if (why == PR_SYSENTRY || why == PR_SYSEXIT)
+	{
+	  int i;
+	  int found_handler = 0;
+
+	  for (i = 0; i < pi->num_syscall_handlers; i++)
+	    if (pi->syscall_handlers[i].syscall_num == what)
+	      {
+		found_handler = 1;
+		pi->saved_rtnval = pi->pid;
+		pi->saved_statval = 0;
+		if (!pi->syscall_handlers[i].func
+		    (pi, what, why, &pi->saved_rtnval, &pi->saved_statval))
+		  pi->had_event = 0;
+		break;
+	      }
+
+	  if (!found_handler)
+	    {
+	      if (why == PR_SYSENTRY)
+		error ("PR_SYSENTRY, unhandled system call %d", what);
+	      else
+		error ("PR_SYSEXIT, unhandled system call %d", what);
+	    }
+	}
+    }
+
+  /* find a relevant process with an event */
+
+  for (pi = procinfo_list; pi; pi = pi->next)
+    if (pi->had_event && (pid == -1 || pi->pid == pid))
+      break;
+
+  if (!pi)
+    {
+      wait_fd ();
+      goto scan_again;
+    }
+
+  if (!checkerr
+  && !(THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP)))
+    {
+      if (!procfs_write_pcwstop (pi))
+	{
+	  checkerr++;
+	}
+    }
+  if (checkerr)
+    {
+      if (errno == ENOENT)
+	{
+	  /* XXX Fixme -- what to do if attached?  Can't call wait... */
+	  rtnval = wait (&statval);
+	  if ((rtnval) != (PIDGET (inferior_pid)))
+	    {
+	      print_sys_errmsg (pi->pathname, errno);
+	      error ("procfs_wait: wait failed, returned %d", rtnval);
+	      /* NOTREACHED */
+	    }
+	}
+      else
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCSTATUS or PIOCWSTOP failed.");
+	  /* NOTREACHED */
+	}
+    }
+  else if (THE_PR_LWP(pi->prstatus).pr_flags & (PR_STOPPED | PR_ISTOP))
+    {
+#ifdef UNIXWARE
+      rtnval = pi->prstatus.pr_pid;
+#else
+      rtnval = pi->pid;
+#endif
+      why = THE_PR_LWP(pi->prstatus).pr_why;
+      what = THE_PR_LWP(pi->prstatus).pr_what;
+
+      switch (why)
+	{
+	case PR_SIGNALLED:
+	  statval = (what << 8) | 0177;
+	  break;
+	case PR_SYSENTRY:
+	case PR_SYSEXIT:
+	  rtnval = pi->saved_rtnval;
+	  statval = pi->saved_statval;
+	  break;
+	case PR_REQUESTED:
+	  statval = (SIGSTOP << 8) | 0177;
+	  break;
+	case PR_JOBCONTROL:
+	  statval = (what << 8) | 0177;
+	  break;
+	case PR_FAULTED:
+	  switch (what)
+	    {
+#ifdef FLTWATCH
+	    case FLTWATCH:
+	      statval = (SIGTRAP << 8) | 0177;
+	      break;
+#endif
+#ifdef FLTKWATCH
+	    case FLTKWATCH:
+	      statval = (SIGTRAP << 8) | 0177;
+	      break;
+#endif
+#ifndef FAULTED_USE_SIGINFO
+	      /* Irix, contrary to the documentation, fills in 0 for si_signo.
+		 Solaris fills in si_signo.  I'm not sure about others.  */
+	    case FLTPRIV:
+	    case FLTILL:
+	      statval = (SIGILL << 8) | 0177;
+	      break;
+	    case FLTBPT:
+	    case FLTTRACE:
+	      statval = (SIGTRAP << 8) | 0177;
+	      break;
+	    case FLTSTACK:
+	    case FLTACCESS:
+	    case FLTBOUNDS:
+	      statval = (SIGSEGV << 8) | 0177;
+	      break;
+	    case FLTIOVF:
+	    case FLTIZDIV:
+	    case FLTFPE:
+	      statval = (SIGFPE << 8) | 0177;
+	      break;
+	    case FLTPAGE:		/* Recoverable page fault */
+#endif /* not FAULTED_USE_SIGINFO */
+	    default:
+	      /* Use the signal which the kernel assigns.  This is better than
+		 trying to second-guess it from the fault.  In fact, I suspect
+		 that FLTACCESS can be either SIGSEGV or SIGBUS.  */
+              statval =
+		 ((THE_PR_LWP(pi->prstatus).pr_info.si_signo) << 8) | 0177;
+	      break;
+	    }
+	  break;
+	default:
+	  error ("PIOCWSTOP, unknown why %d, what %d", why, what);
+	}
+      /* Stop all the other threads when any of them stops.  */
+
+      {
+	struct procinfo *procinfo, *next_pi;
+
+	for (procinfo = procinfo_list; procinfo; procinfo = next_pi)
+	  {
+	    next_pi = procinfo->next;
+	    if (!procinfo->had_event)
+	      {
+#ifdef PROCFS_USE_READ_WRITE
+		long cmd = PCSTOP;
+		if (write (pi->ctl_fd, (char *) &cmd, sizeof (long)) < 0)
+		  {
+		    print_sys_errmsg (procinfo->pathname, errno);
+		    error ("PCSTOP failed");
+		  }
+#else
+		/* A bug in Solaris (2.5) causes us to hang when trying to
+		   stop a stopped process.  So, we have to check first in
+		   order to avoid the hang. */
+		if (!procfs_read_status (procinfo))
+		  {
+		    /* The LWP has apparently terminated.  */
+		    if (info_verbose)
+		      printf_filtered ("LWP %d doesn't respond.\n", 
+				       (procinfo->pid >> 16) & 0xffff);
+		    close_proc_file (procinfo);
+		    continue;
+		  }
+
+		if (!(procinfo->prstatus.pr_flags & PR_STOPPED))
+		  if (ioctl (procinfo->ctl_fd, PIOCSTOP, &procinfo->prstatus)
+		      < 0)
+		    {
+		      print_sys_errmsg (procinfo->pathname, errno);
+		      warning ("PIOCSTOP failed");
+		    }
+#endif
+	      }
+	  }
+      }
+    }
+  else
+    {
+      error ("PIOCWSTOP, stopped for unknown/unhandled reason, flags %#x",
+	     THE_PR_LWP(pi->prstatus).pr_flags);
+    }
+
+  store_waitstatus (ourstatus, statval);
+
+  if (rtnval == -1)		/* No more children to wait for */
+    {
+      warning ("Child process unexpectedly missing");
+      /* Claim it exited with unknown signal.  */
+      ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+      ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+      return rtnval;
+    }
+
+  pi->had_event = 0;		/* Indicate that we've seen this one */
+  return (rtnval);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	set_proc_siginfo - set a process's current signal info
+
+SYNOPSIS
+
+	void set_proc_siginfo (struct procinfo *pip, int signo);
+
+DESCRIPTION
+
+	Given a pointer to a process info struct in PIP and a signal number
+	in SIGNO, set the process's current signal and its associated signal
+	information.  The signal will be delivered to the process immediately
+	after execution is resumed, even if it is being held.  In addition,
+	this particular delivery will not cause another PR_SIGNALLED stop
+	even if the signal is being traced.
+
+	If we are not delivering the same signal that the prstatus siginfo
+	struct contains information about, then synthesize a siginfo struct
+	to match the signal we are doing to deliver, make it of the type
+	"generated by a user process", and send this synthesized copy.  When
+	used to set the inferior's signal state, this will be required if we
+	are not currently stopped because of a traced signal, or if we decide
+	to continue with a different signal.
+
+	Note that when continuing the inferior from a stop due to receipt
+	of a traced signal, we either have set PRCSIG to clear the existing
+	signal, or we have to call this function to do a PIOCSSIG with either
+	the existing siginfo struct from pr_info, or one we have synthesized
+	appropriately for the signal we want to deliver.  Otherwise if the
+	signal is still being traced, the inferior will immediately stop
+	again.
+
+	See siginfo(5) for more details.
+*/
+
+static void
+set_proc_siginfo (pip, signo)
+     struct procinfo *pip;
+     int signo;
+{
+  struct siginfo newsiginfo;
+  struct siginfo *sip;
+  struct sigi_ctl sictl;
+
+#ifdef PROCFS_DONT_PIOCSSIG_CURSIG
+  /* With Alpha OSF/1 procfs, the kernel gets really confused if it
+     receives a PIOCSSIG with a signal identical to the current signal,
+     it messes up the current signal. Work around the kernel bug.  */
+  if (signo == THE_PR_LWP(pip->prstatus).pr_cursig)
+    return;
+#endif
+
+#ifdef UNIXWARE
+  if (signo == THE_PR_LWP(pip->prstatus).pr_info.si_signo)
+    {
+      memcpy ((char *) &sictl.siginfo, (char *) &pip->prstatus.pr_lwp.pr_info,
+		sizeof (siginfo_t));
+    }
+#else
+  if (signo == THE_PR_LWP(pip->prstatus).pr_info.si_signo)
+    {
+      sip = &pip -> prstatus.pr_info;
+    }
+#endif
+  else
+    {
+#ifdef UNIXWARE
+      siginfo_t *sip = &sictl.siginfo;
+      memset ((char *) sip, 0, sizeof (siginfo_t));
+#else
+      memset ((char *) &newsiginfo, 0, sizeof (newsiginfo));
+      sip = &newsiginfo;
+#endif
+      sip -> si_signo = signo;
+      sip -> si_code = 0;
+      sip -> si_errno = 0;
+      sip -> si_pid = getpid ();
+      sip -> si_uid = getuid ();
+    }
+#ifdef PROCFS_USE_READ_WRITE
+  sictl.cmd = PCSSIG;
+  if (write (pip->ctl_fd, (char *) &sictl, sizeof (struct sigi_ctl)) < 0)
+#else
+  if (ioctl (pip->ctl_fd, PIOCSSIG, sip) < 0)
+#endif
+    {
+      print_sys_errmsg (pip -> pathname, errno);
+      warning ("PIOCSSIG failed");
+    }
+}
+
+/* Resume execution of process PID.  If STEP is nozero, then
+   just single step it.  If SIGNAL is nonzero, restart it with that
+   signal activated.  */
+
+static void
+procfs_resume (pid, step, signo)
+     int pid;
+     int step;
+     enum target_signal signo;
+{
+  int signal_to_pass;
+  struct procinfo *pi, *procinfo, *next_pi;
+  struct proc_ctl pctl;
+
+  pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
+
+  errno = 0;
+#ifdef UNIXWARE
+  pctl.cmd = PCRUN;
+  pctl.data = PRCFAULT;
+#else
+  pi->prrun.pr_flags = PRSTRACE | PRSFAULT | PRCFAULT;
+#endif
+
+#if 0
+  /* It should not be necessary.  If the user explicitly changes the value,
+     value_assign calls write_register_bytes, which writes it.  */
+/*	It may not be absolutely necessary to specify the PC value for
+	restarting, but to be safe we use the value that gdb considers
+	to be current.  One case where this might be necessary is if the
+	user explicitly changes the PC value that gdb considers to be
+	current.  FIXME:  Investigate if this is necessary or not.  */
+
+#ifdef PRSVADDR_BROKEN
+/* Can't do this under Solaris running on a Sparc, as there seems to be no
+   place to put nPC.  In fact, if you use this, nPC seems to be set to some
+   random garbage.  We have to rely on the fact that PC and nPC have been
+   written previously via PIOCSREG during a register flush. */
+
+  pi->prrun.pr_vaddr = (caddr_t) *(int *) &registers[REGISTER_BYTE (PC_REGNUM)];
+  pi->prrun.pr_flags != PRSVADDR;
+#endif
+#endif
+
+  if (signo == TARGET_SIGNAL_STOP && pi->nopass_next_sigstop)
+    /* When attaching to a child process, if we forced it to stop with
+       a PIOCSTOP, then we will have set the nopass_next_sigstop flag.
+       Upon resuming the first time after such a stop, we explicitly
+       inhibit sending it another SIGSTOP, which would be the normal
+       result of default signal handling.  One potential drawback to
+       this is that we will also ignore any attempt to by the user
+       to explicitly continue after the attach with a SIGSTOP.  Ultimately
+       this problem should be dealt with by making the routines that
+       deal with the inferior a little smarter, and possibly even allow
+       an inferior to continue running at the same time as gdb.  (FIXME?)  */
+    signal_to_pass = 0;
+  else if (signo == TARGET_SIGNAL_TSTP
+	   && THE_PR_LWP(pi->prstatus).pr_cursig == SIGTSTP
+	   && THE_PR_LWP(pi->prstatus).pr_action.sa_handler == SIG_DFL
+	   )
+
+    /* We are about to pass the inferior a SIGTSTP whose action is
+       SIG_DFL.  The SIG_DFL action for a SIGTSTP is to stop
+       (notifying the parent via wait()), and then keep going from the
+       same place when the parent is ready for you to keep going.  So
+       under the debugger, it should do nothing (as if the program had
+       been stopped and then later resumed.  Under ptrace, this
+       happens for us, but under /proc, the system obligingly stops
+       the process, and wait_for_inferior would have no way of
+       distinguishing that type of stop (which indicates that we
+       should just start it again), with a stop due to the pr_trace
+       field of the prrun_t struct.
+
+       Note that if the SIGTSTP is being caught, we *do* need to pass it,
+       because the handler needs to get executed.  */
+    signal_to_pass = 0;
+  else
+    signal_to_pass = target_signal_to_host (signo);
+
+  if (signal_to_pass)
+    {
+      set_proc_siginfo (pi, signal_to_pass);
+    }
+  else
+    {
+#ifdef UNIXWARE
+      pctl.data |= PRCSIG;
+#else
+      pi->prrun.pr_flags |= PRCSIG;
+#endif
+    }
+  pi->nopass_next_sigstop = 0;
+  if (step)
+    {
+#ifdef UNIXWARE
+      pctl.data |= PRSTEP;
+#else
+      pi->prrun.pr_flags |= PRSTEP;
+#endif
+    }
+  pi->had_event = 0;
+  /* Don't try to start a process unless it's stopped on an
+     `event of interest'.  Doing so will cause errors.  */
+
+  if (!procfs_read_status (pi))
+    {
+      /* The LWP has apparently terminated.  */
+      if (info_verbose)
+	printf_filtered ("LWP %d doesn't respond.\n", 
+			 (pi->pid >> 16) & 0xffff);
+      close_proc_file (pi);
+    }
+  else
+    {
+#ifdef PROCFS_USE_READ_WRITE
+      if (write (pi->ctl_fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+#else
+      if ((pi->prstatus.pr_flags & PR_ISTOP)
+	  && ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+#endif
+	{
+	  /* The LWP has apparently terminated.  */
+	  if (info_verbose)
+	    printf_filtered ("LWP %d doesn't respond.\n", 
+			     (pi->pid >> 16) & 0xffff);
+	  close_proc_file (pi);
+	}
+    }
+
+  /* Continue all the other threads that haven't had an event of interest.
+     Also continue them if they have NOPASS_NEXT_SIGSTOP set; this is only
+     set by do_attach, and means this is the first resume after an attach.  
+     All threads were CSTOP'd by do_attach, and should be resumed now.  */
+
+  if (pid == -1)
+    for (procinfo = procinfo_list; procinfo; procinfo = next_pi)
+      {
+	next_pi = procinfo->next;
+	if (pi != procinfo)
+	  if (!procinfo->had_event || 
+	      (procinfo->nopass_next_sigstop && signo == TARGET_SIGNAL_STOP))
+	    {
+	      procinfo->had_event = procinfo->nopass_next_sigstop = 0;
+#ifdef PROCFS_USE_READ_WRITE
+	      pctl.data = PRCFAULT | PRCSIG;
+	      if (write (procinfo->ctl_fd, (char *) &pctl,
+			 sizeof (struct proc_ctl)) < 0)
+		{
+		  if (!procfs_read_status (procinfo))
+		    fprintf_unfiltered(gdb_stderr, 
+				       "procfs_read_status failed, errno=%d\n",
+				       errno);
+		  print_sys_errmsg (procinfo->pathname, errno);
+		  error ("PCRUN failed");
+		}
+#else
+	      procinfo->prrun.pr_flags &= PRSTEP;
+	      procinfo->prrun.pr_flags |= PRCFAULT | PRCSIG;
+	      if (!procfs_read_status (procinfo))
+		{
+		  /* The LWP has apparently terminated.  */
+		  if (info_verbose)
+		    printf_filtered ("LWP %d doesn't respond.\n", 
+				     (procinfo->pid >> 16) & 0xffff);
+		  close_proc_file (procinfo);
+		  continue;
+		}
+
+	      /* Don't try to start a process unless it's stopped on an
+		 `event of interest'.  Doing so will cause errors.  */
+
+	      if ((procinfo->prstatus.pr_flags & PR_ISTOP)
+		  && ioctl (procinfo->ctl_fd, PIOCRUN, &procinfo->prrun) < 0)
+		{
+		  if (!procfs_read_status (procinfo))
+		    fprintf_unfiltered(gdb_stderr, 
+				       "procfs_read_status failed, errno=%d\n",
+				       errno);
+		  print_sys_errmsg (procinfo->pathname, errno);
+		  warning ("PIOCRUN failed");
+		}
+#endif
+	    }
+	procfs_read_status (procinfo);
+      }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_fetch_registers -- fetch current registers from inferior
+
+SYNOPSIS
+
+	void procfs_fetch_registers (int regno)
+
+DESCRIPTION
+
+	Read the current values of the inferior's registers, both the
+	general register set and floating point registers (if supported)
+	and update gdb's idea of their current values.
+
+*/
+
+static void
+procfs_fetch_registers (regno)
+     int regno;
+{
+  struct procinfo *pi;
+
+  pi = current_procinfo;
+
+#ifdef UNIXWARE
+  if (procfs_read_status (pi))
+    {
+      supply_gregset (&pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs);
+#if defined (FP0_REGNUM)
+      supply_fpregset (&pi->prstatus.pr_lwp.pr_context.uc_mcontext.fpregs); 
+#endif
+    }
+#else /* UNIXWARE */
+  if (ioctl (pi->ctl_fd, PIOCGREG, &pi->gregset.gregset) != -1)
+    {
+      supply_gregset (&pi->gregset.gregset);
+    }
+#if defined (FP0_REGNUM)
+  if (ioctl (pi->ctl_fd, PIOCGFPREG, &pi->fpregset.fpregset) != -1)
+    {
+      supply_fpregset (&pi->fpregset.fpregset);
+    }
+#endif
+#endif /* UNIXWARE */
+}
+
+/*
+
+LOCAL FUNCTION
+
+	proc_init_failed - called when /proc access initialization fails
+fails
+
+SYNOPSIS
+
+	static void proc_init_failed (struct procinfo *pi, 
+				      char *why, int kill_p)
+
+DESCRIPTION
+
+	This function is called whenever initialization of access to a /proc
+	entry fails.  It prints a suitable error message, does some cleanup,
+	and then invokes the standard error processing routine which dumps
+	us back into the command loop.  If KILL_P is true, sends SIGKILL.
+ */
+
+static void
+proc_init_failed (pi, why, kill_p)
+     struct procinfo *pi;
+     char *why;
+     int  kill_p;
+{
+  print_sys_errmsg (pi->pathname, errno);
+  if (kill_p)
+    kill (pi->pid, SIGKILL);
+  close_proc_file (pi);
+  error (why);
+  /* NOTREACHED */
+}
+
+/*
+
+LOCAL FUNCTION
+
+	close_proc_file - close any currently open /proc entry
+
+SYNOPSIS
+
+	static void close_proc_file (struct procinfo *pip)
+
+DESCRIPTION
+
+	Close any currently open /proc entry and mark the process information
+	entry as invalid.  In order to ensure that we don't try to reuse any
+	stale information, the pid, fd, and pathnames are explicitly
+	invalidated, which may be overkill.
+
+ */
+
+static void
+close_proc_file (pip)
+     struct procinfo *pip;
+{
+  struct procinfo *procinfo;
+
+  delete_thread (pip->pid);	/* remove thread from GDB's thread list */
+  remove_fd (pip);		/* Remove fd from poll/select list */
+
+  close (pip->ctl_fd);
+#ifdef HAVE_MULTIPLE_PROC_FDS
+  close (pip->as_fd);
+  close (pip->status_fd);
+  close (pip->map_fd);
+#endif
+
+  free (pip -> pathname);
+
+  /* Unlink pip from the procinfo chain.  Note pip might not be on the list. */
+
+  if (procinfo_list == pip)
+    procinfo_list = pip->next;
+  else
+    {
+      for (procinfo = procinfo_list; procinfo; procinfo = procinfo->next)
+        {
+          if (procinfo->next == pip)
+	    {
+	      procinfo->next = pip->next;
+	      break;
+	    }
+        }
+      free (pip);
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	open_proc_file - open a /proc entry for a given process id
+
+SYNOPSIS
+
+	static int open_proc_file (int pid, struct procinfo *pip, int mode)
+
+DESCRIPTION
+
+	Given a process id and a mode, close the existing open /proc
+	entry (if any) and open one for the new process id, in the
+	specified mode.  Once it is open, then mark the local process
+	information structure as valid, which guarantees that the pid,
+	fd, and pathname fields match an open /proc entry.  Returns
+	zero if the open fails, nonzero otherwise.
+
+	Note that the pathname is left intact, even when the open fails,
+	so that callers can use it to construct meaningful error messages
+	rather than just "file open failed".
+
+	Note that for Solaris, the process-id also includes an LWP-id, so we
+	actually attempt to open that.  If we are handed a pid with a 0 LWP-id,
+	then we will ask the kernel what it is and add it to the pid.  Hence,
+	the pid can be changed by us.
+ */
+
+static int
+open_proc_file (pid, pip, mode, control)
+     int pid;
+     struct procinfo *pip;
+     int mode;
+     int control;
+{
+  int tmp, tmpfd;
+
+  pip -> next = NULL;
+  pip -> had_event = 0;
+  pip -> pathname = xmalloc (MAX_PROC_NAME_SIZE);
+  pip -> pid = pid;
+
+#ifndef PIOCOPENLWP
+  tmp = pid;
+#else
+  tmp = pid & 0xffff;
+#endif
+
+#ifdef HAVE_MULTIPLE_PROC_FDS
+  sprintf (pip->pathname, STATUS_PROC_NAME_FMT, tmp);
+  if ((pip->status_fd = open (pip->pathname, O_RDONLY)) < 0)
+    {
+      return 0;
+    }
+
+  sprintf (pip->pathname, AS_PROC_NAME_FMT, tmp);
+  if ((pip->as_fd = open (pip->pathname, O_RDWR)) < 0)
+    {
+      close (pip->status_fd);
+      return 0;
+    }
+
+  sprintf (pip->pathname, MAP_PROC_NAME_FMT, tmp);
+  if ((pip->map_fd = open (pip->pathname, O_RDONLY)) < 0)
+    {
+      close (pip->status_fd);
+      close (pip->as_fd);
+      return 0;
+    }
+
+  if (control)
+    {
+      sprintf (pip->pathname, CTL_PROC_NAME_FMT, tmp);
+      if ((pip->ctl_fd = open (pip->pathname, O_WRONLY)) < 0)
+	{
+	  close (pip->status_fd);
+          close (pip->as_fd);
+          close (pip->map_fd);
+          return 0;
+        }
+    }
+
+#else /* HAVE_MULTIPLE_PROC_FDS */
+  sprintf (pip -> pathname, CTL_PROC_NAME_FMT, tmp);
+
+  if ((tmpfd = open (pip -> pathname, mode)) < 0)
+    return 0;
+
+#ifndef PIOCOPENLWP
+    pip -> ctl_fd = tmpfd;
+    pip -> as_fd = tmpfd;
+    pip -> map_fd = tmpfd;
+    pip -> status_fd = tmpfd;
+#else
+  tmp = (pid >> 16) & 0xffff;	/* Extract thread id */
+
+  if (tmp == 0)
+    {				/* Don't know thread id yet */
+      if (ioctl (tmpfd, PIOCSTATUS, &pip -> prstatus) < 0)
+	{
+	  print_sys_errmsg (pip -> pathname, errno);
+	  close (tmpfd);
+	  error ("open_proc_file: PIOCSTATUS failed");
+	}
+
+      tmp = pip -> prstatus.pr_who; /* Get thread id from prstatus_t */
+      pip -> pid = (tmp << 16) | pid; /* Update pip */
+    }
+
+  if ((pip -> ctl_fd = ioctl (tmpfd, PIOCOPENLWP, &tmp)) < 0)
+    {
+      close (tmpfd);
+      return 0;
+    }
+
+#ifdef PIOCSET			/* New method */
+  {
+      long pr_flags;
+      pr_flags = PR_ASYNC;
+      ioctl (pip -> ctl_fd, PIOCSET, &pr_flags);
+  }
+#endif
+
+  /* keep extra fds in sync */
+  pip->as_fd = pip->ctl_fd;
+  pip->map_fd = pip->ctl_fd;
+  pip->status_fd = pip->ctl_fd;
+
+  close (tmpfd);		/* All done with main pid */
+#endif	/* PIOCOPENLWP */
+
+#endif /* HAVE_MULTIPLE_PROC_FDS */
+
+  return 1;
+}
+
+static char *
+mappingflags (flags)
+     long flags;
+{
+  static char asciiflags[8];
+  
+  strcpy (asciiflags, "-------");
+#if defined (MA_PHYS)
+  if (flags & MA_PHYS)   asciiflags[0] = 'd';
+#endif
+  if (flags & MA_STACK)  asciiflags[1] = 's';
+  if (flags & MA_BREAK)  asciiflags[2] = 'b';
+  if (flags & MA_SHARED) asciiflags[3] = 's';
+  if (flags & MA_READ)   asciiflags[4] = 'r';
+  if (flags & MA_WRITE)  asciiflags[5] = 'w';
+  if (flags & MA_EXEC)   asciiflags[6] = 'x';
+  return (asciiflags);
+}
+
+static void
+info_proc_flags (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  struct trans *transp;
+#ifdef UNIXWARE
+  long flags = pip->prstatus.pr_flags | pip->prstatus.pr_lwp.pr_flags;
+#else
+  long flags = pip->prstatus.pr_flags;
+#endif
+
+  printf_filtered ("%-32s", "Process status flags:");
+  if (!summary)
+    {
+      printf_filtered ("\n\n");
+    }
+  for (transp = pr_flag_table; transp -> name != NULL; transp++)
+    {
+      if (flags & transp -> value)
+	{
+	  if (summary)
+	    {
+	      printf_filtered ("%s ", transp -> name);
+	    }
+	  else
+	    {
+	      printf_filtered ("\t%-16s %s.\n", transp -> name, transp -> desc);
+	    }
+	}
+    }
+  printf_filtered ("\n");
+}
+
+static void
+info_proc_stop (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  struct trans *transp;
+  int why;
+  int what;
+
+  why = THE_PR_LWP(pip->prstatus).pr_why;
+  what = THE_PR_LWP(pip->prstatus).pr_what;
+
+  if (THE_PR_LWP(pip->prstatus).pr_flags & PR_STOPPED)
+    {
+      printf_filtered ("%-32s", "Reason for stopping:");
+      if (!summary)
+	{
+	  printf_filtered ("\n\n");
+	}
+      for (transp = pr_why_table; transp -> name != NULL; transp++)
+	{
+	  if (why == transp -> value)
+	    {
+	      if (summary)
+		{
+		  printf_filtered ("%s ", transp -> name);
+		}
+	      else
+		{
+		  printf_filtered ("\t%-16s %s.\n",
+				   transp -> name, transp -> desc);
+		}
+	      break;
+	    }
+	}
+      
+      /* Use the pr_why field to determine what the pr_what field means, and
+	 print more information. */
+      
+      switch (why)
+	{
+	  case PR_REQUESTED:
+	    /* pr_what is unused for this case */
+	    break;
+	  case PR_JOBCONTROL:
+	  case PR_SIGNALLED:
+	    if (summary)
+	      {
+		printf_filtered ("%s ", signalname (what));
+	      }
+	    else
+	      {
+		printf_filtered ("\t%-16s %s.\n", signalname (what),
+				 safe_strsignal (what));
+	      }
+	    break;
+	  case PR_SYSENTRY:
+	    if (summary)
+	      {
+		printf_filtered ("%s ", syscallname (what));
+	      }
+	    else
+	      {
+		printf_filtered ("\t%-16s %s.\n", syscallname (what),
+				 "Entered this system call");
+	      }
+	    break;
+	  case PR_SYSEXIT:
+	    if (summary)
+	      {
+		printf_filtered ("%s ", syscallname (what));
+	      }
+	    else
+	      {
+		printf_filtered ("\t%-16s %s.\n", syscallname (what),
+				 "Returned from this system call");
+	      }
+	    break;
+	  case PR_FAULTED:
+	    if (summary)
+	      {
+		printf_filtered ("%s ",
+				 lookupname (faults_table, what, "fault"));
+	      }
+	    else
+	      {
+		printf_filtered ("\t%-16s %s.\n",
+				 lookupname (faults_table, what, "fault"),
+				 lookupdesc (faults_table, what));
+	      }
+	    break;
+	  }
+      printf_filtered ("\n");
+    }
+}
+
+static void
+info_proc_siginfo (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  struct siginfo *sip;
+
+  if ((THE_PR_LWP(pip->prstatus).pr_flags & PR_STOPPED) &&
+      (THE_PR_LWP(pip->prstatus).pr_why == PR_SIGNALLED ||
+       THE_PR_LWP(pip->prstatus).pr_why == PR_FAULTED))
+    {
+      printf_filtered ("%-32s", "Additional signal/fault info:");
+      sip = &(THE_PR_LWP(pip->prstatus).pr_info);
+      if (summary)
+	{
+	  printf_filtered ("%s ", signalname (sip -> si_signo));
+	  if (sip -> si_errno > 0)
+	    {
+	      printf_filtered ("%s ", errnoname (sip -> si_errno));
+	    }
+	  if (sip -> si_code <= 0)
+	    {
+	      printf_filtered ("sent by %s, uid %d ",
+			       target_pid_to_str (sip -> si_pid),
+			       sip -> si_uid);
+	    }
+	  else
+	    {
+	      printf_filtered ("%s ", sigcodename (sip));
+	      if ((sip -> si_signo == SIGILL) ||
+		  (sip -> si_signo == SIGFPE) ||
+		  (sip -> si_signo == SIGSEGV) ||
+		  (sip -> si_signo == SIGBUS))
+		{
+		  printf_filtered ("addr=%#lx ",
+				   (unsigned long) sip -> si_addr);
+		}
+	      else if ((sip -> si_signo == SIGCHLD))
+		{
+		  printf_filtered ("child %s, status %u ",
+				   target_pid_to_str (sip -> si_pid),
+				   sip -> si_status);
+		}
+	      else if ((sip -> si_signo == SIGPOLL))
+		{
+		  printf_filtered ("band %u ", sip -> si_band);
+		}
+	    }
+	}
+      else
+	{
+	  printf_filtered ("\n\n");
+	  printf_filtered ("\t%-16s %s.\n", signalname (sip -> si_signo),
+			   safe_strsignal (sip -> si_signo));
+	  if (sip -> si_errno > 0)
+	    {
+	      printf_filtered ("\t%-16s %s.\n",
+			       errnoname (sip -> si_errno),
+			       safe_strerror (sip -> si_errno));
+	    }
+	  if (sip -> si_code <= 0)
+	    {
+	      printf_filtered ("\t%-16u %s\n", sip -> si_pid, /* XXX need target_pid_to_str() */
+			       "PID of process sending signal");
+	      printf_filtered ("\t%-16u %s\n", sip -> si_uid,
+			       "UID of process sending signal");
+	    }
+	  else
+	    {
+	      printf_filtered ("\t%-16s %s.\n", sigcodename (sip),
+			       sigcodedesc (sip));
+	      if ((sip -> si_signo == SIGILL) ||
+		  (sip -> si_signo == SIGFPE))
+		{
+		  printf_filtered ("\t%#-16lx %s.\n",
+				   (unsigned long) sip -> si_addr,
+				   "Address of faulting instruction");
+		}
+	      else if ((sip -> si_signo == SIGSEGV) ||
+		       (sip -> si_signo == SIGBUS))
+		{
+		  printf_filtered ("\t%#-16lx %s.\n",
+				   (unsigned long) sip -> si_addr,
+				   "Address of faulting memory reference");
+		}
+	      else if ((sip -> si_signo == SIGCHLD))
+		{
+		  printf_filtered ("\t%-16u %s.\n", sip -> si_pid, /* XXX need target_pid_to_str() */
+				   "Child process ID");
+		  printf_filtered ("\t%-16u %s.\n", sip -> si_status,
+				   "Child process exit value or signal");
+		}
+	      else if ((sip -> si_signo == SIGPOLL))
+		{
+		  printf_filtered ("\t%-16u %s.\n", sip -> si_band,
+				   "Band event for POLL_{IN,OUT,MSG}");
+		}
+	    }
+	}
+      printf_filtered ("\n");
+    }
+}
+
+static void
+info_proc_syscalls (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  int syscallnum;
+
+  if (!summary)
+    {
+
+#if 0	/* FIXME:  Needs to use gdb-wide configured info about system calls. */
+      if (pip -> prstatus.pr_flags & PR_ASLEEP)
+	{
+	  int syscallnum = pip -> prstatus.pr_reg[R_D0];
+	  if (summary)
+	    {
+	      printf_filtered ("%-32s", "Sleeping in system call:");
+	      printf_filtered ("%s", syscallname (syscallnum));
+	    }
+	  else
+	    {
+	      printf_filtered ("Sleeping in system call '%s'.\n",
+			       syscallname (syscallnum));
+	    }
+	}
+#endif
+
+#ifndef UNIXWARE
+      if (ioctl (pip -> ctl_fd, PIOCGENTRY, &pip -> entryset) < 0)
+	{
+	  print_sys_errmsg (pip -> pathname, errno);
+	  error ("PIOCGENTRY failed");
+	}
+      
+      if (ioctl (pip -> ctl_fd, PIOCGEXIT, &pip -> exitset) < 0)
+	{
+	  print_sys_errmsg (pip -> pathname, errno);
+	  error ("PIOCGEXIT failed");
+	}
+#endif
+      
+      printf_filtered ("System call tracing information:\n\n");
+      
+      printf_filtered ("\t%-12s %-8s %-8s\n",
+		       "System call",
+		       "Entry",
+		       "Exit");
+      for (syscallnum = 0; syscallnum < MAX_SYSCALLS; syscallnum++)
+	{
+	  QUIT;
+	  if (syscall_table[syscallnum] != NULL)
+	    printf_filtered ("\t%-12s ", syscall_table[syscallnum]);
+	  else
+	    printf_filtered ("\t%-12d ", syscallnum);
+
+#ifdef UNIXWARE
+	  printf_filtered ("%-8s ",
+			   prismember (&pip->prstatus.pr_sysentry, syscallnum)
+			   ? "on" : "off");
+	  printf_filtered ("%-8s ",
+			   prismember (&pip->prstatus.pr_sysexit, syscallnum)
+			   ? "on" : "off");
+#else
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> entryset, syscallnum)
+			   ? "on" : "off");
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> exitset, syscallnum)
+			   ? "on" : "off");
+#endif
+	  printf_filtered ("\n");
+	}
+      printf_filtered ("\n");
+    }
+}
+
+static char *
+signalname (signo)
+     int signo;
+{
+  const char *name;
+  static char locbuf[32];
+
+  name = strsigno (signo);
+  if (name == NULL)
+    {
+      sprintf (locbuf, "Signal %d", signo);
+    }
+  else
+    {
+      sprintf (locbuf, "%s (%d)", name, signo);
+    }
+  return (locbuf);
+}
+
+static char *
+errnoname (errnum)
+     int errnum;
+{
+  const char *name;
+  static char locbuf[32];
+
+  name = strerrno (errnum);
+  if (name == NULL)
+    {
+      sprintf (locbuf, "Errno %d", errnum);
+    }
+  else
+    {
+      sprintf (locbuf, "%s (%d)", name, errnum);
+    }
+  return (locbuf);
+}
+
+static void
+info_proc_signals (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  int signo;
+
+  if (!summary)
+    {
+#ifndef PROCFS_USE_READ_WRITE
+      if (ioctl (pip -> ctl_fd, PIOCGTRACE, &pip -> trace) < 0)
+	{
+	  print_sys_errmsg (pip -> pathname, errno);
+	  error ("PIOCGTRACE failed");
+	}
+#endif
+      
+      printf_filtered ("Disposition of signals:\n\n");
+      printf_filtered ("\t%-15s %-8s %-8s %-8s  %s\n\n",
+		       "Signal", "Trace", "Hold", "Pending", "Description");
+      for (signo = 0; signo < NSIG; signo++)
+	{
+	  QUIT;
+	  printf_filtered ("\t%-15s ", signalname (signo));
+#ifdef UNIXWARE
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> prstatus.pr_sigtrace, signo)
+			   ? "on" : "off");
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> prstatus.pr_lwp.pr_context.uc_sigmask, signo)
+			   ? "on" : "off");
+#else
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> trace, signo)
+			   ? "on" : "off");
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> prstatus.pr_sighold, signo)
+			   ? "on" : "off");
+#endif
+
+#ifdef UNIXWARE
+	  if (prismember (&pip->prstatus.pr_sigpend, signo) ||
+		prismember (&pip->prstatus.pr_lwp.pr_lwppend, signo))
+	    printf_filtered("%-8s ", "yes");
+	  else
+	    printf_filtered("%-8s ", "no");
+#else /* UNIXWARE */
+#ifdef PROCFS_SIGPEND_OFFSET
+	  /* Alpha OSF/1 numbers the pending signals from 1.  */
+	  printf_filtered ("%-8s ",
+			   (signo ? prismember (&pip -> prstatus.pr_sigpend,
+						signo - 1)
+				  : 0)
+			   ? "yes" : "no");
+#else
+	  printf_filtered ("%-8s ",
+			   prismember (&pip -> prstatus.pr_sigpend, signo)
+			   ? "yes" : "no");
+#endif
+#endif /* UNIXWARE */
+	  printf_filtered (" %s\n", safe_strsignal (signo));
+	}
+      printf_filtered ("\n");
+    }
+}
+
+static void
+info_proc_faults (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  struct trans *transp;
+
+  if (!summary)
+    {
+#ifndef UNIXWARE
+      if (ioctl (pip -> ctl_fd, PIOCGFAULT, &pip->fltset.fltset) < 0)
+	{
+	  print_sys_errmsg (pip -> pathname, errno);
+	  error ("PIOCGFAULT failed");
+	}
+#endif
+      
+      printf_filtered ("Current traced hardware fault set:\n\n");
+      printf_filtered ("\t%-12s %-8s\n", "Fault", "Trace");
+
+      for (transp = faults_table; transp -> name != NULL; transp++)
+	{
+	  QUIT;
+	  printf_filtered ("\t%-12s ", transp -> name);
+#ifdef UNIXWARE
+	  printf_filtered ("%-8s", prismember (&pip->prstatus.pr_flttrace, transp -> value)
+			   ? "on" : "off");
+#else
+	  printf_filtered ("%-8s", prismember (&pip->fltset.fltset, transp -> value)
+			   ? "on" : "off");
+#endif
+	  printf_filtered ("\n");
+	}
+      printf_filtered ("\n");
+    }
+}
+
+static void
+info_proc_mappings (pip, summary)
+     struct procinfo *pip;
+     int summary;
+{
+  int nmap;
+  struct prmap *prmaps;
+  struct prmap *prmap;
+  struct stat sbuf;
+
+  if (!summary)
+    {
+      printf_filtered ("Mapped address spaces:\n\n");
+#ifdef BFD_HOST_64_BIT
+      printf_filtered ("  %18s %18s %10s %10s %7s\n",
+#else
+      printf_filtered ("\t%10s %10s %10s %10s %7s\n",
+#endif
+		       "Start Addr",
+		       "  End Addr",
+		       "      Size",
+		       "    Offset",
+		       "Flags");
+#ifdef PROCFS_USE_READ_WRITE
+      if (fstat (pip->map_fd, &sbuf) == 0)
+        {
+          nmap = sbuf.st_size / sizeof (prmap_t);
+	  prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
+          if ((lseek (pip->map_fd, 0, SEEK_SET) == 0) &&
+		(read (pip->map_fd, (char *) prmaps,
+		nmap * sizeof (*prmaps)) == (nmap * sizeof (*prmaps))))
+	    {
+	      int i = 0;
+	      for (prmap = prmaps; i < nmap; ++prmap, ++i)
+#else
+      if (ioctl (pip -> ctl_fd, PIOCNMAP, &nmap) == 0)
+	{
+	  prmaps = (struct prmap *) alloca ((nmap + 1) * sizeof (*prmaps));
+	  if (ioctl (pip -> ctl_fd, PIOCMAP, prmaps) == 0)
+	    {
+	      for (prmap = prmaps; prmap -> pr_size; ++prmap)
+#endif /* PROCFS_USE_READ_WRITE */
+		{
+#ifdef BFD_HOST_64_BIT
+		  printf_filtered ("  %#18lx %#18lx %#10x %#10x %7s\n",
+#else
+		  printf_filtered ("\t%#10lx %#10lx %#10x %#10x %7s\n",
+#endif
+				   (unsigned long)prmap -> pr_vaddr,
+				   (unsigned long)prmap -> pr_vaddr
+				     + prmap -> pr_size - 1,
+				   prmap -> pr_size,
+				   prmap -> pr_off,
+				   mappingflags (prmap -> pr_mflags));
+		}
+	    }
+	}
+      printf_filtered ("\n");
+    }
+}
+
+/*
+
+LOCAL FUNCTION
+
+	info_proc -- implement the "info proc" command
+
+SYNOPSIS
+
+	void info_proc (char *args, int from_tty)
+
+DESCRIPTION
+
+	Implement gdb's "info proc" command by using the /proc interface
+	to print status information about any currently running process.
+
+	Examples of the use of "info proc" are:
+
+	info proc		(prints summary info for current inferior)
+	info proc 123		(prints summary info for process with pid 123)
+	info proc mappings	(prints address mappings)
+	info proc times		(prints process/children times)
+	info proc id		(prints pid, ppid, gid, sid, etc)
+		FIXME:  i proc id not implemented.
+	info proc status	(prints general process state info)
+		FIXME:  i proc status not implemented.
+	info proc signals	(prints info about signal handling)
+	info proc all		(prints all info)
+
+ */
+
+static void
+info_proc (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int pid;
+  struct procinfo *pip;
+  struct cleanup *old_chain;
+  char **argv;
+  int argsize;
+  int summary = 1;
+  int flags = 0;
+  int syscalls = 0;
+  int signals = 0;
+  int faults = 0;
+  int mappings = 0;
+  int times = 0;
+  int id = 0;
+  int status = 0;
+  int all = 0;
+  int nlwp;
+  int *lwps;
+
+  old_chain = make_cleanup (null_cleanup, 0);
+
+  /* Default to using the current inferior if no pid specified.  Note
+     that inferior_pid may be 0, hence we set okerr.  */
+
+  pid = inferior_pid & 0x7fffffff;		/* strip off sol-thread bit */
+  if (!(pip = find_procinfo (pid, 1)))		/* inferior_pid no good?  */
+    pip = procinfo_list;			/* take first available */
+  pid = pid & 0xffff;				/* extract "real" pid */
+
+  if (args != NULL)
+    {
+      if ((argv = buildargv (args)) == NULL)
+	{
+	  nomem (0);
+	}
+      make_cleanup (freeargv, (char *) argv);
+
+      while (*argv != NULL)
+	{
+	  argsize = strlen (*argv);
+	  if (argsize >= 1 && strncmp (*argv, "all", argsize) == 0)
+	    {
+	      summary = 0;
+	      all = 1;
+	    }
+	  else if (argsize >= 2 && strncmp (*argv, "faults", argsize) == 0)
+	    {
+	      summary = 0;
+	      faults = 1;
+	    }
+	  else if (argsize >= 2 && strncmp (*argv, "flags", argsize) == 0)
+	    {
+	      summary = 0;
+	      flags = 1;
+	    }
+	  else if (argsize >= 1 && strncmp (*argv, "id", argsize) == 0)
+	    {
+	      summary = 0;
+	      id = 1;
+	    }
+	  else if (argsize >= 1 && strncmp (*argv, "mappings", argsize) == 0)
+	    {
+	      summary = 0;
+	      mappings = 1;
+	    }
+	  else if (argsize >= 2 && strncmp (*argv, "signals", argsize) == 0)
+	    {
+	      summary = 0;
+	      signals = 1;
+	    }
+	  else if (argsize >= 2 && strncmp (*argv, "status", argsize) == 0)
+	    {
+	      summary = 0;
+	      status = 1;
+	    }
+	  else if (argsize >= 2 && strncmp (*argv, "syscalls", argsize) == 0)
+	    {
+	      summary = 0;
+	      syscalls = 1;
+	    }
+	  else if (argsize >= 1 && strncmp (*argv, "times", argsize) == 0)
+	    {
+	      summary = 0;
+	      times = 1;
+	    }
+	  else if ((pid = atoi (*argv)) > 0)
+	    {
+	      pip = (struct procinfo *) xmalloc (sizeof (struct procinfo));
+	      memset (pip, 0, sizeof (*pip));
+
+	      pip->pid = pid;
+	      if (!open_proc_file (pid, pip, O_RDONLY, 0))
+		{
+		  perror_with_name (pip -> pathname);
+		  /* NOTREACHED */
+		}
+	      pid = pip->pid;
+	      make_cleanup (close_proc_file, pip);
+	    }
+	  else if (**argv != '\000')
+	    {
+	      error ("Unrecognized or ambiguous keyword `%s'.", *argv);
+	    }
+	  argv++;
+	}
+    }
+
+  /* If we don't have a valid open process at this point, then we have no
+     inferior or didn't specify a specific pid. */
+
+  if (!pip)
+    {
+      error ("\
+No process.  Start debugging a program or specify an explicit process ID.");
+    }
+
+  if (!procfs_read_status (pip))
+    {
+      print_sys_errmsg (pip -> pathname, errno);
+      error ("procfs_read_status failed");
+    }
+
+#ifndef PROCFS_USE_READ_WRITE
+#ifdef PIOCLWPIDS
+  nlwp = pip->prstatus.pr_nlwp;
+  lwps = alloca ((2 * nlwp + 2) * sizeof (*lwps));
+
+  if (ioctl (pip->ctl_fd, PIOCLWPIDS, lwps))
+    {
+      print_sys_errmsg (pip -> pathname, errno);
+      error ("PIOCLWPIDS failed");
+    }
+#else /* PIOCLWPIDS */
+  nlwp = 1;
+  lwps = alloca ((2 * nlwp + 2) * sizeof *lwps);
+  lwps[0] = 0;
+#endif /* PIOCLWPIDS */
+
+  for (; nlwp > 0; nlwp--, lwps++)
+    {
+      pip = find_procinfo ((*lwps << 16) | pid, 1);
+
+      if (!pip)
+	{
+	  pip = (struct procinfo *) xmalloc (sizeof (struct procinfo));
+	  memset (pip, 0, sizeof (*pip));
+	  if (!open_proc_file ((*lwps << 16) | pid, pip, O_RDONLY, 0))
+	    continue;
+
+	  make_cleanup (close_proc_file, pip);
+
+	  if (!procfs_read_status (pip))
+	    {
+	      print_sys_errmsg (pip -> pathname, errno);
+	      error ("procfs_read_status failed");
+	    }
+	}
+
+#endif /* PROCFS_USE_READ_WRITE */
+
+      /* Print verbose information of the requested type(s), or just a summary
+	 of the information for all types. */
+
+      printf_filtered ("\nInformation for %s.%d:\n\n", pip -> pathname, *lwps);
+      if (summary || all || flags)
+	{
+	  info_proc_flags (pip, summary);
+	}
+      if (summary || all)
+	{
+	  info_proc_stop (pip, summary);
+#ifdef UNIXWARE
+	  supply_gregset (&pip->prstatus.pr_lwp.pr_context.uc_mcontext.gregs);
+#else
+	  supply_gregset (&pip->prstatus.pr_reg);
+#endif
+	  printf_filtered ("PC: ");
+	  print_address (read_pc (), gdb_stdout);
+	  printf_filtered ("\n");
+	}
+      if (summary || all || signals || faults)
+	{
+	  info_proc_siginfo (pip, summary);
+	}
+      if (summary || all || syscalls)
+	{
+	  info_proc_syscalls (pip, summary);
+	}
+      if (summary || all || mappings)
+	{
+	  info_proc_mappings (pip, summary);
+	}
+      if (summary || all || signals)
+	{
+	  info_proc_signals (pip, summary);
+	}
+      if (summary || all || faults)
+	{
+	  info_proc_faults (pip, summary);
+	}
+      printf_filtered ("\n");
+
+      /* All done, deal with closing any temporary process info structure,
+	 freeing temporary memory , etc. */
+
+      do_cleanups (old_chain);
+#ifndef PROCFS_USE_READ_WRITE
+    }
+#endif
+}
+
+/*
+
+LOCAL FUNCTION
+
+	modify_inherit_on_fork_flag - Change the inherit-on-fork flag
+
+SYNOPSIS
+
+	void modify_inherit_on_fork_flag (fd, flag)
+
+DESCRIPTION
+
+	Call this routine to modify the inherit-on-fork flag.  This routine is
+	just a nice wrapper to hide the #ifdefs needed by various systems to
+	control this flag.
+
+ */
+
+static void
+modify_inherit_on_fork_flag (fd, flag)
+     int fd;
+     int flag;
+{
+#if defined (PIOCSET) || defined (PCSET)
+  long pr_flags;
+#endif
+  int retval = 0;
+  struct proc_ctl pctl;
+
+#if defined (PIOCSET) || defined (PCSET)	/* New method */
+  pr_flags = PR_FORK;
+  if (flag)
+    {
+#ifdef PROCFS_USE_READ_WRITE
+      pctl.cmd = PCSET;
+      pctl.data = PR_FORK;
+      if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+	retval = -1;
+#else
+      retval = ioctl (fd, PIOCSET, &pr_flags);
+#endif
+    }
+  else
+    {
+#ifdef PROCFS_USE_READ_WRITE
+      pctl.cmd = PCRESET;
+      pctl.data = PR_FORK;
+      if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+	retval = -1;
+#else
+      retval = ioctl (fd, PIOCRESET, &pr_flags);
+#endif
+    }
+
+#else
+#ifdef PIOCSFORK		/* Original method */
+  if (flag)
+    {
+      retval = ioctl (fd, PIOCSFORK, NULL);
+    }
+  else
+    {
+      retval = ioctl (fd, PIOCRFORK, NULL);
+    }
+#else
+  Neither PR_FORK nor PIOCSFORK exist!!!
+#endif
+#endif
+
+  if (!retval)
+    return;
+
+  print_sys_errmsg ("modify_inherit_on_fork_flag", errno);
+  error ("PIOCSFORK or PR_FORK modification failed");
+}
+
+/*
+
+LOCAL FUNCTION
+
+	modify_run_on_last_close_flag - Change the run-on-last-close flag
+
+SYNOPSIS
+
+	void modify_run_on_last_close_flag (fd, flag)
+
+DESCRIPTION
+
+	Call this routine to modify the run-on-last-close flag.  This routine
+	is just a nice wrapper to hide the #ifdefs needed by various systems to
+	control this flag.
+
+ */
+
+static void
+modify_run_on_last_close_flag (fd, flag)
+     int fd;
+     int flag;
+{
+#if defined (PIOCSET) || defined (PCSET)
+  long pr_flags;
+#endif
+  int retval = 0;
+  struct proc_ctl pctl;
+
+#if defined (PIOCSET) || defined (PCSET)	/* New method */
+  pr_flags = PR_RLC;
+  if (flag)
+    {
+#ifdef PROCFS_USE_READ_WRITE
+      pctl.cmd = PCSET;
+      pctl.data = PR_RLC;
+      if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+	retval = -1;
+#else
+      retval = ioctl (fd, PIOCSET, &pr_flags);
+#endif
+    }
+  else
+    {
+#ifdef PROCFS_USE_READ_WRITE
+      pctl.cmd = PCRESET;
+      pctl.data = PR_RLC;
+      if (write (fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+	retval = -1;
+#else
+      retval = ioctl (fd, PIOCRESET, &pr_flags);
+#endif
+    }
+
+#else
+#ifdef PIOCSRLC			/* Original method */
+  if (flag)
+    retval = ioctl (fd, PIOCSRLC, NULL);
+  else
+    retval = ioctl (fd, PIOCRRLC, NULL);
+#else
+  Neither PR_RLC nor PIOCSRLC exist!!!
+#endif
+#endif
+
+  if (!retval)
+    return;
+
+  print_sys_errmsg ("modify_run_on_last_close_flag", errno);
+  error ("PIOCSRLC or PR_RLC modification failed");
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_clear_syscall_trap -- Deletes the trap for the specified system call.
+
+SYNOPSIS
+
+	void procfs_clear_syscall_trap (struct procinfo *, int syscall_num, int errok)
+
+DESCRIPTION
+
+	This function function disables traps for the specified system call.
+	errok is non-zero if errors should be ignored.
+ */
+
+static void
+procfs_clear_syscall_trap (pi, syscall_num, errok)
+     struct procinfo *pi;
+     int syscall_num;
+     int errok;
+{
+  sysset_t sysset;
+  int goterr, i;
+
+#ifndef UNIXWARE
+  goterr = ioctl (pi->ctl_fd, PIOCGENTRY, &sysset) < 0;
+
+  if (goterr && !errok)
+    {
+      print_sys_errmsg (pi->pathname, errno);
+      error ("PIOCGENTRY failed");
+    }
+
+  if (!goterr)
+    {
+      prdelset (&sysset, syscall_num);
+
+      if ((ioctl (pi->ctl_fd, PIOCSENTRY, &sysset) < 0) && !errok)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCSENTRY failed");
+	}
+    }
+
+  goterr = ioctl (pi->ctl_fd, PIOCGEXIT, &sysset) < 0;
+
+  if (goterr && !errok)
+    {
+      procfs_clear_syscall_trap (pi, syscall_num, 1);
+      print_sys_errmsg (pi->pathname, errno);
+      error ("PIOCGEXIT failed");
+    }
+
+  if (!goterr)
+    {
+      praddset (&sysset, syscall_num);
+
+      if ((ioctl (pi->ctl_fd, PIOCSEXIT, &sysset) < 0) && !errok)
+	{
+	  procfs_clear_syscall_trap (pi, syscall_num, 1);
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCSEXIT failed");
+	}
+    }
+#endif
+
+  if (!pi->syscall_handlers)
+    {
+      if (!errok)
+	error ("procfs_clear_syscall_trap:  syscall_handlers is empty");
+      return;
+    }
+
+  /* Remove handler func from the handler list */
+
+  for (i = 0; i < pi->num_syscall_handlers; i++)
+    if (pi->syscall_handlers[i].syscall_num == syscall_num)
+      {
+	if (i + 1 != pi->num_syscall_handlers)
+	  {			/* Not the last entry.
+				   Move subsequent entries fwd. */
+	    memcpy (&pi->syscall_handlers[i], &pi->syscall_handlers[i + 1],
+		    (pi->num_syscall_handlers - i - 1)
+		    * sizeof (struct procfs_syscall_handler));
+	  }
+
+	pi->syscall_handlers = xrealloc (pi->syscall_handlers,
+					 (pi->num_syscall_handlers - 1)
+					 * sizeof (struct procfs_syscall_handler));
+	pi->num_syscall_handlers--;
+	return;
+      }
+
+  if (!errok)
+    error ("procfs_clear_syscall_trap:  Couldn't find handler for sys call %d",
+	   syscall_num);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_set_syscall_trap -- arrange for a function to be called when the
+				   child executes the specified system call.
+
+SYNOPSIS
+
+	void procfs_set_syscall_trap (struct procinfo *, int syscall_num, int flags,
+				      syscall_func_t *function)
+
+DESCRIPTION
+
+	This function sets up an entry and/or exit trap for the specified system
+	call.  When the child executes the specified system call, your function
+	will be	called with the call #, a flag that indicates entry or exit, and
+	pointers to rtnval and statval (which are used by procfs_wait).  The
+	function should return non-zero if something interesting happened, zero
+	otherwise.
+ */
+
+static void
+procfs_set_syscall_trap (pi, syscall_num, flags, func)
+     struct procinfo *pi;
+     int syscall_num;
+     int flags;
+     syscall_func_t *func;
+{
+  sysset_t sysset;
+
+#ifndef UNIXWARE
+  if (flags & PROCFS_SYSCALL_ENTRY)
+    {
+      if (ioctl (pi->ctl_fd, PIOCGENTRY, &sysset) < 0)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCGENTRY failed");
+	}
+
+      praddset (&sysset, syscall_num);
+
+      if (ioctl (pi->ctl_fd, PIOCSENTRY, &sysset) < 0)
+	{
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCSENTRY failed");
+	}
+    }
+
+  if (flags & PROCFS_SYSCALL_EXIT)
+    {
+      if (ioctl (pi->ctl_fd, PIOCGEXIT, &sysset) < 0)
+	{
+	  procfs_clear_syscall_trap (pi, syscall_num, 1);
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCGEXIT failed");
+	}
+
+      praddset (&sysset, syscall_num);
+
+      if (ioctl (pi->ctl_fd, PIOCSEXIT, &sysset) < 0)
+	{
+	  procfs_clear_syscall_trap (pi, syscall_num, 1);
+	  print_sys_errmsg (pi->pathname, errno);
+	  error ("PIOCSEXIT failed");
+	}
+    }
+#endif
+
+  if (!pi->syscall_handlers)
+    {
+      pi->syscall_handlers = xmalloc (sizeof (struct procfs_syscall_handler));
+      pi->syscall_handlers[0].syscall_num = syscall_num;
+      pi->syscall_handlers[0].func = func;
+      pi->num_syscall_handlers = 1;
+    }
+  else
+    {
+      int i;
+
+      for (i = 0; i < pi->num_syscall_handlers; i++)
+	if (pi->syscall_handlers[i].syscall_num == syscall_num)
+	  {
+	    pi->syscall_handlers[i].func = func;
+	    return;
+	  }
+
+      pi->syscall_handlers = xrealloc (pi->syscall_handlers, (i + 1)
+				       * sizeof (struct procfs_syscall_handler));
+      pi->syscall_handlers[i].syscall_num = syscall_num;
+      pi->syscall_handlers[i].func = func;
+      pi->num_syscall_handlers++;
+    }
+}
+
+#ifdef SYS_lwp_create
+
+/*
+
+LOCAL FUNCTION
+
+	procfs_lwp_creation_handler - handle exit from the _lwp_create syscall
+
+SYNOPSIS
+
+	int procfs_lwp_creation_handler (pi, syscall_num, why, rtnvalp, statvalp)
+
+DESCRIPTION
+
+	This routine is called both when an inferior process and it's new lwp
+	are about to finish a _lwp_create() system call.  This is the system
+	call that Solaris uses to create a lightweight process.  When the
+	target process gets this event, we can look at sysarg[2] to find the
+	new childs lwp ID, and create a procinfo struct from that.  After that,
+	we pretend that we got a SIGTRAP, and return non-zero to tell
+	procfs_wait to wake up.  Subsequently, wait_for_inferior gets woken up,
+	sees the new process and continues it.
+
+	When we see the child exiting from lwp_create, we just contine it,
+	since everything was handled when the parent trapped.
+
+NOTES
+	In effect, we are only paying attention to the parent's completion of
+	the lwp_create syscall.  If we only paid attention to the child
+	instead, then we wouldn't detect the creation of a suspended thread.
+ */
+
+static int
+procfs_lwp_creation_handler (pi, syscall_num, why, rtnvalp, statvalp)
+     struct procinfo *pi;
+     int syscall_num;
+     int why;
+     int *rtnvalp;
+     int *statvalp;
+{
+  int lwp_id;
+  struct procinfo *childpi;
+  struct proc_ctl pctl;
+
+  /* We've just detected the completion of an lwp_create system call.  Now we
+     need to setup a procinfo struct for this thread, and notify the thread
+     system of the new arrival.  */
+
+  /* If lwp_create failed, then nothing interesting happened.  Continue the
+     process and go back to sleep. */
+
+#ifdef UNIXWARE
+  /* Joel ... can you check this logic out please? JKJ */
+  if (pi->prstatus.pr_lwp.pr_context.uc_mcontext.gregs[R_EFL] & 1)
+    { /* _lwp_create failed */
+      pctl.cmd = PCRUN;
+      pctl.data = PRCFAULT;
+
+      if (write (pi->ctl_fd, (char *) &pctl, sizeof (struct proc_ctl)) < 0)
+	perror_with_name (pi->pathname);
+
+      return 0;
+    }
+#else /* UNIXWARE */
+  if (PROCFS_GET_CARRY (pi->prstatus.pr_reg))
+    {				/* _lwp_create failed */
+      pi->prrun.pr_flags &= PRSTEP;
+      pi->prrun.pr_flags |= PRCFAULT;
+
+      if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+	perror_with_name (pi->pathname);
+
+      return 0;
+    }
+#endif
+
+  /* At this point, the new thread is stopped at it's first instruction, and
+     the parent is stopped at the exit from lwp_create.  */
+
+  if (pi->new_child)		/* Child? */
+    {				/* Yes, just continue it */
+#ifdef UNIXWARE
+      pctl.cmd = PCRUN;
+      pctl.data = PRCFAULT;
+
+      if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
+#else /* !UNIXWARE */
+      pi->prrun.pr_flags &= PRSTEP;
+      pi->prrun.pr_flags |= PRCFAULT;
+
+      if ((pi->prstatus.pr_flags & PR_ISTOP)
+	  && ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+#endif /* !UNIXWARE */
+	perror_with_name (pi->pathname);
+
+      pi->new_child = 0;	/* No longer new */
+
+      return 0;
+    }
+
+  /* We're the proud parent of a new thread.  Setup an exit trap for lwp_create
+     in the child and continue the parent.  */
+
+  /* Third arg is pointer to new thread id. */
+  lwp_id = read_memory_integer (
+     THE_PR_LWP(pi->prstatus).pr_sysarg[2], sizeof (int));
+
+  lwp_id = (lwp_id << 16) | PIDGET (pi->pid);
+
+  childpi = create_procinfo (lwp_id);
+
+  /* The new process has actually inherited the lwp_create syscall trap from
+     it's parent, but we still have to call this to register handlers for
+     that child.  */
+
+  procfs_set_inferior_syscall_traps (childpi);
+  add_thread (lwp_id);
+  printf_filtered ("[New %s]\n", target_pid_to_str (lwp_id));
+
+  /* Continue the parent */
+#ifdef UNIXWARE
+  pctl.cmd = PCRUN;
+  pctl.data = PRCFAULT;
+
+  if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
+#else
+  pi->prrun.pr_flags &= PRSTEP;
+  pi->prrun.pr_flags |= PRCFAULT;
+  if (ioctl (pi->ctl_fd, PIOCRUN, &pi->prrun) != 0)
+#endif
+    perror_with_name (pi->pathname);
+
+  /* The new child may have been created in one of two states: 
+     SUSPENDED or RUNNABLE.  If runnable, we will simply signal it to run.
+     If suspended, we flag it to be continued later, when it has an event.  */
+
+  if (THE_PR_LWP(childpi->prstatus).pr_why == PR_SUSPENDED)
+    childpi->new_child = 1;	/* Flag this as an unseen child process */
+  else
+    {
+      /* Continue the child */
+#ifdef UNIXWARE
+      pctl.cmd = PCRUN;
+      pctl.data = PRCFAULT;
+
+      if (write(pi->ctl_fd, (char *)&pctl, sizeof (struct proc_ctl)) < 0)
+#else
+      childpi->prrun.pr_flags &= PRSTEP;
+      childpi->prrun.pr_flags |= PRCFAULT;
+
+      if (ioctl (childpi->ctl_fd, PIOCRUN, &childpi->prrun) != 0)
+#endif
+	perror_with_name (childpi->pathname);
+    }
+  return 0;
+}
+#endif /* SYS_lwp_create */
+
+/* Fork an inferior process, and start debugging it with /proc.  */
+
+static void
+procfs_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  char *shell_file = getenv ("SHELL");
+  char *tryname;
+  if (shell_file != NULL && strchr (shell_file, '/') == NULL)
+    {
+
+      /* We will be looking down the PATH to find shell_file.  If we
+	 just do this the normal way (via execlp, which operates by
+	 attempting an exec for each element of the PATH until it
+	 finds one which succeeds), then there will be an exec for
+	 each failed attempt, each of which will cause a PR_SYSEXIT
+	 stop, and we won't know how to distinguish the PR_SYSEXIT's
+	 for these failed execs with the ones for successful execs
+	 (whether the exec has succeeded is stored at that time in the
+	 carry bit or some such architecture-specific and
+	 non-ABI-specified place).
+
+	 So I can't think of anything better than to search the PATH
+	 now.  This has several disadvantages: (1) There is a race
+	 condition; if we find a file now and it is deleted before we
+	 exec it, we lose, even if the deletion leaves a valid file
+	 further down in the PATH, (2) there is no way to know exactly
+	 what an executable (in the sense of "capable of being
+	 exec'd") file is.  Using access() loses because it may lose
+	 if the caller is the superuser; failing to use it loses if
+	 there are ACLs or some such.  */
+
+      char *p;
+      char *p1;
+      /* FIXME-maybe: might want "set path" command so user can change what
+	 path is used from within GDB.  */
+      char *path = getenv ("PATH");
+      int len;
+      struct stat statbuf;
+
+      if (path == NULL)
+	path = "/bin:/usr/bin";
+
+      tryname = alloca (strlen (path) + strlen (shell_file) + 2);
+      for (p = path; p != NULL; p = p1 ? p1 + 1: NULL)
+	{
+	  p1 = strchr (p, ':');
+	  if (p1 != NULL)
+	    len = p1 - p;
+	  else
+	    len = strlen (p);
+	  strncpy (tryname, p, len);
+	  tryname[len] = '\0';
+	  strcat (tryname, "/");
+	  strcat (tryname, shell_file);
+	  if (access (tryname, X_OK) < 0)
+	    continue;
+	  if (stat (tryname, &statbuf) < 0)
+	    continue;
+	  if (!S_ISREG (statbuf.st_mode))
+	    /* We certainly need to reject directories.  I'm not quite
+	       as sure about FIFOs, sockets, etc., but I kind of doubt
+	       that people want to exec() these things.  */
+	    continue;
+	  break;
+	}
+      if (p == NULL)
+	/* Not found.  This must be an error rather than merely passing
+	   the file to execlp(), because execlp() would try all the
+	   exec()s, causing GDB to get confused.  */
+	error ("Can't find shell %s in PATH", shell_file);
+
+      shell_file = tryname;
+    }
+
+  fork_inferior (exec_file, allargs, env,
+		 proc_set_exec_trap, procfs_init_inferior, NULL, shell_file);
+
+  /* We are at the first instruction we care about.  */
+  /* Pedal to the metal... */
+
+  proceed ((CORE_ADDR) -1, TARGET_SIGNAL_0, 0);
+}
+
+/* Clean up after the inferior dies.  */
+
+static void
+procfs_mourn_inferior ()
+{
+  struct procinfo *pi;
+  struct procinfo *next_pi;
+
+  for (pi = procinfo_list; pi; pi = next_pi)
+    {
+      next_pi = pi->next;
+      unconditionally_kill_inferior (pi);
+    }
+
+  unpush_target (&procfs_ops);
+  generic_mourn_inferior ();
+}
+
+
+/* Mark our target-struct as eligible for stray "run" and "attach" commands.  */
+static int
+procfs_can_run ()
+{
+  /* This variable is controlled by modules that sit atop procfs that may layer
+     their own process structure atop that provided here.  sol-thread.c does
+     this because of the Solaris two-level thread model.  */
+
+  return !procfs_suppress_run;
+}
+#ifdef TARGET_HAS_HARDWARE_WATCHPOINTS
+#ifndef UNIXWARE
+
+/* Insert a watchpoint */
+int
+procfs_set_watchpoint(pid, addr, len, rw)
+     int		pid;
+     CORE_ADDR		addr;
+     int		len;
+     int		rw;
+{
+  struct procinfo	*pi;
+  prwatch_t		wpt;
+
+  pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
+  wpt.pr_vaddr = (caddr_t)addr;
+  wpt.pr_size = len;
+  wpt.pr_wflags = ((rw & 1) ? MA_READ : 0) | ((rw & 2) ? MA_WRITE : 0);
+  if (ioctl (pi->ctl_fd, PIOCSWATCH, &wpt) < 0)
+    {
+      if (errno == E2BIG)
+	return -1;
+      /* Currently it sometimes happens that the same watchpoint gets
+	 deleted twice - don't die in this case (FIXME please) */
+      if (errno == ESRCH && len == 0)
+	return 0;
+      print_sys_errmsg (pi->pathname, errno);
+      error ("PIOCSWATCH failed");
+    }
+  return 0;
+}
+
+int
+procfs_stopped_by_watchpoint(pid)
+    int			pid;
+{
+  struct procinfo	*pi;
+  short 		what;
+  short 		why;
+
+  pi = find_procinfo (pid == -1 ? inferior_pid : pid, 0);
+  if (pi->prstatus.pr_flags & (PR_STOPPED | PR_ISTOP))
+    {
+      why = pi->prstatus.pr_why;
+      what = pi->prstatus.pr_what;
+      if (why == PR_FAULTED 
+#if defined (FLTWATCH) && defined (FLTKWATCH)
+	  && (what == FLTWATCH || what == FLTKWATCH)
+#else
+#ifdef FLTWATCH
+	  && (what == FLTWATCH) 
+#endif
+#ifdef FLTKWATCH
+	  && (what == FLTKWATCH)
+#endif
+#endif
+	  )
+	return what;
+    }
+  return 0;
+}
+#endif /* !UNIXWARE */
+#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
+
+/* Why is this necessary?  Shouldn't dead threads just be removed from the
+   thread database?  */
+
+static int
+procfs_thread_alive (pid)
+     int pid;
+{
+  struct procinfo *pi, *next_pi;
+
+  for (pi = procinfo_list; pi; pi = next_pi)
+    {
+      next_pi = pi->next;
+      if (pi -> pid == pid)
+	if (procfs_read_status (pi))	/* alive */
+	  return 1;
+	else				/* defunct (exited) */
+	  {
+	    close_proc_file (pi);
+	    return 0;
+	  }
+    }
+  return 0;
+}
+
+int
+procfs_first_available ()
+{
+  struct procinfo *pi;
+
+  for (pi = procinfo_list; pi; pi = pi->next)
+    {
+      if (procfs_read_status (pi))
+	return pi->pid;
+    }
+  return -1;
+}
+
+int
+procfs_get_pid_fd (pid)
+     int pid;
+{
+  struct procinfo *pi = find_procinfo (pid, 1);
+
+  if (pi == NULL)
+    return -1;
+
+  return pi->ctl_fd;
+}
+
+/* Send a SIGINT to the process group.  This acts just like the user typed a
+   ^C on the controlling terminal.
+
+   XXX - This may not be correct for all systems.  Some may want to use
+   killpg() instead of kill (-pgrp). */
+
+static void
+procfs_stop ()
+{
+  extern pid_t inferior_process_group;
+
+  kill (-inferior_process_group, SIGINT);
+}
+
+/* Convert a pid to printable form. */
+
+#ifdef TIDGET
+char *
+procfs_pid_to_str (pid)
+     int pid;
+{
+  static char buf[100];
+
+  sprintf (buf, "Kernel thread %d", TIDGET (pid));
+
+  return buf;
+}
+#endif /* TIDGET */
+
+
+static void
+init_procfs_ops ()
+{
+  procfs_ops.to_shortname = "procfs";
+  procfs_ops.to_longname = "Unix /proc child process";
+  procfs_ops.to_doc = "Unix /proc child process (started by the \"run\" command).";
+  procfs_ops.to_open = procfs_open;
+  procfs_ops.to_attach = procfs_attach;
+  procfs_ops.to_detach = procfs_detach;
+  procfs_ops.to_resume = procfs_resume;
+  procfs_ops.to_wait = procfs_wait;
+  procfs_ops.to_fetch_registers = procfs_fetch_registers;
+  procfs_ops.to_store_registers = procfs_store_registers;
+  procfs_ops.to_prepare_to_store = procfs_prepare_to_store;
+  procfs_ops.to_xfer_memory = procfs_xfer_memory;
+  procfs_ops.to_files_info = procfs_files_info;
+  procfs_ops.to_insert_breakpoint = memory_insert_breakpoint;
+  procfs_ops.to_remove_breakpoint = memory_remove_breakpoint;
+  procfs_ops.to_terminal_init = terminal_init_inferior;
+  procfs_ops.to_terminal_inferior = terminal_inferior;
+  procfs_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+  procfs_ops.to_terminal_ours = terminal_ours;
+  procfs_ops.to_terminal_info = child_terminal_info;
+  procfs_ops.to_kill = procfs_kill_inferior;
+  procfs_ops.to_create_inferior = procfs_create_inferior;
+  procfs_ops.to_mourn_inferior = procfs_mourn_inferior;
+  procfs_ops.to_can_run = procfs_can_run;
+  procfs_ops.to_notice_signals = procfs_notice_signals;
+  procfs_ops.to_thread_alive = procfs_thread_alive;
+  procfs_ops.to_stop = procfs_stop;
+  procfs_ops.to_stratum = process_stratum;
+  procfs_ops.to_has_all_memory = 1;
+  procfs_ops.to_has_memory = 1;
+  procfs_ops.to_has_stack = 1;
+  procfs_ops.to_has_registers = 1;
+  procfs_ops.to_has_execution = 1;
+  procfs_ops.to_magic = OPS_MAGIC;
+}
+
+void
+_initialize_procfs ()
+{
+#ifdef HAVE_OPTIONAL_PROC_FS
+  char procname[MAX_PROC_NAME_SIZE];
+  int fd;
+
+  /* If we have an optional /proc filesystem (e.g. under OSF/1),
+     don't add procfs support if we cannot access the running
+     GDB via /proc.  */
+  sprintf (procname, STATUS_PROC_NAME_FMT, getpid ());
+  if ((fd = open (procname, O_RDONLY)) < 0)
+    return;
+  close (fd);
+#endif
+
+  init_procfs_ops ();
+  add_target (&procfs_ops);
+
+  add_info ("processes", info_proc, 
+"Show process status information using /proc entry.\n\
+Specify process id or use current inferior by default.\n\
+Specify keywords for detailed information; default is summary.\n\
+Keywords are: `all', `faults', `flags', `id', `mappings', `signals',\n\
+`status', `syscalls', and `times'.\n\
+Unambiguous abbreviations may be used.");
+
+  init_syscall_table ();
+}
diff --git a/gdb/ptx4-nat.c b/gdb/ptx4-nat.c
new file mode 100644
index 0000000..564b799
--- /dev/null
+++ b/gdb/ptx4-nat.c
@@ -0,0 +1,209 @@
+/* Native-dependent code for ptx 4.0
+   Copyright 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include <sys/procfs.h>
+#include <sys/ptrace.h>
+#include <sys/param.h>
+#include <fcntl.h>
+
+/*  Given a pointer to a general register set in /proc format (gregset_t *),
+    unpack the register contents and supply them as gdb's idea of the current
+    register values. */
+
+void
+supply_gregset (gregsetp)
+     gregset_t *gregsetp;
+{
+	supply_register(EAX_REGNUM, (char *)&(*gregsetp)[EAX]);
+	supply_register(EDX_REGNUM, (char *)&(*gregsetp)[EDX]);
+	supply_register(ECX_REGNUM, (char *)&(*gregsetp)[ECX]);
+	supply_register(EBX_REGNUM, (char *)&(*gregsetp)[EBX]);
+	supply_register(ESI_REGNUM, (char *)&(*gregsetp)[ESI]);
+	supply_register(EDI_REGNUM, (char *)&(*gregsetp)[EDI]);
+	supply_register(ESP_REGNUM, (char *)&(*gregsetp)[UESP]);
+	supply_register(EBP_REGNUM, (char *)&(*gregsetp)[EBP]);
+	supply_register(EIP_REGNUM, (char *)&(*gregsetp)[EIP]);
+	supply_register(EFLAGS_REGNUM, (char *)&(*gregsetp)[EFL]);
+}
+
+void
+fill_gregset (gregsetp, regno)
+     gregset_t *gregsetp;
+     int regno;
+{
+  int regi;
+  extern char registers[];
+
+  for (regi = 0 ; regi < NUM_REGS ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  (*gregsetp)[regi] = *(greg_t *)&registers[REGISTER_BYTE (regi)];
+	}
+    }
+}
+
+#if defined (FP0_REGNUM)
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+     fpregset_t *fpregsetp;
+{
+  supply_fpu_registers((struct fpusave *)&fpregsetp->fp_reg_set);
+  supply_fpa_registers((struct fpasave *)&fpregsetp->f_wregs);
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), update the register specified by REGNO from gdb's idea
+    of the current floating point register set.  If REGNO is -1, update
+    them all. */
+
+void
+fill_fpregset (fpregsetp, regno)
+     fpregset_t *fpregsetp;
+     int regno;
+{
+  int regi;
+  char *to;
+  char *from;
+  extern char registers[];
+
+  /* FIXME: see m68k-tdep.c for an example, for the m68k. */
+}
+
+#endif	/* defined (FP0_REGNUM) */
+
+/*
+ * This doesn't quite do the same thing as the procfs.c version, but give
+ * it the same name so we don't have to put an ifdef in solib.c.
+ */
+/* this could use elf_interpreter() from elfread.c */
+int
+proc_iterate_over_mappings(func)
+	int (*func) PARAMS ((int, CORE_ADDR));
+{
+	vaddr_t curseg, memptr;
+	pt_vseg_t pv;
+	int rv, cmperr;
+	sec_ptr interp_sec;
+	char *interp_content;
+	int interp_fd, funcstat;
+	unsigned int size;
+	char buf1[NBPG], buf2[NBPG];
+
+	/*
+	 * The following is really vile.  We can get the name of the
+	 * shared library from the exec_bfd, and we can get a list of
+	 * each virtual memory segment, but there is no simple way to
+	 * find the mapped segment from the shared library (ala
+	 * procfs's PIOCOPENMEM).  As a pretty nasty kludge, we
+	 * compare the virtual memory segment to the contents of the
+	 * .interp file.  If they match, we assume that we've got the
+	 * right one.
+	 */
+
+	/*
+	 * TODO: for attach, use XPT_OPENT to get the executable, in
+	 * case we're attached without knowning the executable's
+	 * filename.
+	 */
+
+#ifdef VERBOSE_DEBUG
+	printf("proc_iter\n");
+#endif
+	interp_sec = bfd_get_section_by_name(exec_bfd, ".interp");
+	if (!interp_sec) {
+		return 0;
+	}
+
+	size = bfd_section_size(exec_bfd, interp_sec);
+	interp_content = alloca(size);
+	if (0 == bfd_get_section_contents(exec_bfd, interp_sec,
+		interp_content, (file_ptr)0, size)) {
+		return 0;
+	}
+
+#ifdef VERBOSE_DEBUG
+	printf("proc_iter: \"%s\"\n", interp_content);
+#endif
+	interp_fd = open(interp_content, O_RDONLY, 0);
+	if (-1 == interp_fd) {
+		return 0;
+	}
+
+	curseg = 0;
+	while (1) {
+		rv = ptrace(PT_NEXT_VSEG, inferior_pid, &pv, curseg);
+#ifdef VERBOSE_DEBUG
+		printf("PT_NEXT_VSEG: rv %d errno %d\n", rv, errno);
+#endif
+		if (-1 == rv)
+			break;
+		if (0 == rv)
+			break;
+#ifdef VERBOSE_DEBUG
+		printf("pv.pv_start 0x%x pv_size 0x%x pv_prot 0x%x\n",
+		       pv.pv_start, pv.pv_size, pv.pv_prot);
+#endif
+		curseg = pv.pv_start + pv.pv_size;
+
+		rv = lseek(interp_fd, 0, SEEK_SET);
+		if (-1 == rv) {
+			perror("lseek");
+			close(interp_fd);
+			return 0;
+		}
+		for (memptr = pv.pv_start; memptr < pv.pv_start + pv.pv_size;
+		     memptr += NBPG) {
+#ifdef VERBOSE_DEBUG
+			printf("memptr 0x%x\n", memptr);
+#endif
+			rv = read(interp_fd, buf1, NBPG);
+			if (-1 == rv) {
+				perror("read");
+				close(interp_fd);
+				return 0;
+			}
+			rv = ptrace(PT_RDATA_PAGE, inferior_pid, buf2,
+				    memptr);
+			if (-1 == rv) {
+				perror("ptrace");
+				close(interp_fd);
+				return 0;
+			}
+			cmperr = memcmp(buf1, buf2, NBPG);
+			if (cmperr)
+				break;
+		}
+		if (0 == cmperr) {
+			/* this is it */
+			funcstat = (*func)(interp_fd, pv.pv_start);
+			break;
+		}
+	}
+	close(interp_fd);
+	return 0;
+}
diff --git a/gdb/pyr-tdep.c b/gdb/pyr-tdep.c
new file mode 100644
index 0000000..85e9a07
--- /dev/null
+++ b/gdb/pyr-tdep.c
@@ -0,0 +1,452 @@
+/* Pyramid target-dependent code for GDB.
+   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+
+/*** Prettier register printing. ***/
+
+/* Print registers in the same format as pyramid's dbx, adb, sdb.  */
+pyr_print_registers(reg_buf, regnum)
+    long *reg_buf[];
+{
+  register int regno;
+  int usp, ksp;
+  struct user u;
+
+  for (regno = 0; regno < 16; regno++) {
+    printf_unfiltered/*_filtered*/ ("%6.6s: %8x  %6.6s: %8x  %6s: %8x  %6s: %8x\n",
+		     REGISTER_NAME (regno), reg_buf[regno],
+		     REGISTER_NAME (regno+16), reg_buf[regno+16],
+		     REGISTER_NAME (regno+32), reg_buf[regno+32],
+		     REGISTER_NAME (regno+48), reg_buf[regno+48]);
+  }
+  usp = ptrace (3, inferior_pid,
+		(PTRACE_ARG3_TYPE) ((char *)&u.u_pcb.pcb_usp) -
+		((char *)&u), 0);
+  ksp = ptrace (3, inferior_pid,
+		(PTRACE_ARG3_TYPE) ((char *)&u.u_pcb.pcb_ksp) -
+		((char *)&u), 0);
+  printf_unfiltered/*_filtered*/ ("\n%6.6s: %8x  %6.6s: %8x (%08x) %6.6s %8x\n",
+		   REGISTER_NAME (CSP_REGNUM),reg_buf[CSP_REGNUM],
+		   REGISTER_NAME (KSP_REGNUM), reg_buf[KSP_REGNUM], ksp,
+		   "usp", usp);
+}
+
+/* Print the register regnum, or all registers if regnum is -1.
+   fpregs is currently ignored.  */
+
+pyr_do_registers_info (regnum, fpregs)
+    int regnum;
+    int fpregs;
+{
+  /* On a pyr, we know a virtual register can always fit in an long.
+     Here (and elsewhere) we take advantage of that.  Yuk.  */
+  long raw_regs[MAX_REGISTER_RAW_SIZE*NUM_REGS];
+  register int i;
+  
+  for (i = 0 ; i < 64 ; i++) {
+    read_relative_register_raw_bytes(i, raw_regs+i);
+  }
+  if (regnum == -1)
+    pyr_print_registers (raw_regs, regnum);
+  else
+    for (i = 0; i < NUM_REGS; i++)
+      if (i == regnum) {
+	long val = raw_regs[i];
+	
+	fputs_filtered (REGISTER_NAME (i), gdb_stdout);
+	printf_filtered(":");
+	print_spaces_filtered (6 - strlen (REGISTER_NAME (i)), gdb_stdout);
+	if (val == 0)
+	  printf_filtered ("0");
+	else
+	  printf_filtered ("%s  %d", local_hex_string_custom(val,"08"), val);
+	printf_filtered("\n");
+      }
+}
+
+/*** Debugging editions of various macros from m-pyr.h ****/
+
+CORE_ADDR frame_locals_address (frame)
+    struct frame_info *frame;
+{
+  register int addr = find_saved_register (frame,CFP_REGNUM);
+  register int result = read_memory_integer (addr, 4);
+#ifdef PYRAMID_CONTROL_FRAME_DEBUGGING
+  fprintf_unfiltered (gdb_stderr,
+	   "\t[[..frame_locals:%8x, %s= %x @%x fcfp= %x foo= %x\n\t gr13=%x pr13=%x tr13=%x @%x]]\n",
+	   frame->frame,
+	   REGISTER_NAME (CFP_REGNUM),
+	   result, addr,
+	   frame->frame_cfp, (CFP_REGNUM),
+
+
+	   read_register(13), read_register(29), read_register(61),
+	   find_saved_register(frame, 61));
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+
+  /* FIXME: I thought read_register (CFP_REGNUM) should be the right answer;
+     or at least CFP_REGNUM relative to FRAME (ie, result).
+     There seems to be a bug in the way the innermost frame is set up.  */
+
+    return ((frame->next) ? result: frame->frame_cfp);
+}
+
+CORE_ADDR frame_args_addr (frame)
+    struct frame_info *frame;
+{
+  register int addr = find_saved_register (frame,CFP_REGNUM);
+  register int result = read_memory_integer (addr, 4);
+
+#ifdef PYRAMID_CONTROL_FRAME_DEBUGGING
+  fprintf_unfiltered (gdb_stderr,
+	   "\t[[..frame_args:%8x, %s= %x @%x fcfp= %x r_r= %x\n\t gr13=%x pr13=%x tr13=%x @%x]]\n",
+	   frame->frame,
+	   REGISTER_NAME (CFP_REGNUM),
+	   result, addr,
+	   frame->frame_cfp, read_register(CFP_REGNUM),
+
+	   read_register(13), read_register(29), read_register(61),
+	   find_saved_register(frame, 61));
+#endif /*  PYRAMID_CONTROL_FRAME_DEBUGGING */
+
+  /* FIXME: I thought read_register (CFP_REGNUM) should be the right answer;
+     or at least CFP_REGNUM relative to FRAME (ie, result).
+     There seems to be a bug in the way the innermost frame is set up.  */
+    return ((frame->next) ? result: frame->frame_cfp);
+}
+
+#include "symtab.h"
+#include "opcode/pyr.h"
+#include "gdbcore.h"
+
+
+/*  A couple of functions used for debugging frame-handling on
+    Pyramids. (The Pyramid-dependent handling of register values for
+    windowed registers is known to be buggy.)
+
+    When debugging, these functions can supplant the normal definitions of some
+    of the macros in tm-pyramid.h  The quantity of information produced
+    when these functions are used makes the gdb  unusable as a
+    debugger for user programs.  */
+    
+extern unsigned pyr_saved_pc(), pyr_frame_chain();
+
+CORE_ADDR pyr_frame_chain(frame)
+    CORE_ADDR frame;
+{
+    int foo=frame - CONTROL_STACK_FRAME_SIZE;
+    /* printf_unfiltered ("...following chain from %x: got %x\n", frame, foo);*/
+    return foo;
+}
+
+CORE_ADDR pyr_saved_pc(frame)
+    CORE_ADDR frame;
+{
+    int foo=0;
+    foo = read_memory_integer (((CORE_ADDR)(frame))+60, 4);
+    printf_unfiltered ("..reading pc from frame 0x%0x+%d regs: got %0x\n",
+	    frame, 60/4, foo);
+    return foo;
+}
+
+/* Pyramid instructions are never longer than this many bytes.  */
+#define MAXLEN 24
+
+/* Number of elements in the opcode table.  */
+/*const*/ static int nopcodes = (sizeof (pyr_opcodes) / sizeof( pyr_opcodes[0]));
+#define NOPCODES (nopcodes)
+
+/* Let's be byte-independent so we can use this as a cross-assembler.  */
+
+#define NEXTLONG(p)  \
+  (p += 4, (((((p[-4] << 8) + p[-3]) << 8) + p[-2]) << 8) + p[-1])
+
+/* Print one instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+int
+pyr_print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     GDB_FILE *stream;
+{
+  unsigned char buffer[MAXLEN];
+  register int i, nargs, insn_size =4;
+  register unsigned char *p;
+  register char *d;
+  register int insn_opcode, operand_mode;
+  register int index_multiplier, index_reg_regno, op_1_regno, op_2_regno ;
+  long insn;			/* first word of the insn, not broken down. */
+  pyr_insn_format insn_decode;	/* the same, broken out into op{code,erands} */
+  long extra_1, extra_2;
+
+  read_memory (memaddr, buffer, MAXLEN);
+  insn_decode = *((pyr_insn_format *) buffer);
+  insn = * ((int *) buffer);
+  insn_opcode = insn_decode.operator;
+  operand_mode = insn_decode.mode;
+  index_multiplier = insn_decode.index_scale;
+  index_reg_regno = insn_decode.index_reg;
+  op_1_regno = insn_decode.operand_1;
+  op_2_regno = insn_decode.operand_2;
+  
+  
+  if (*((int *)buffer) == 0x0) {
+    /* "halt" looks just like an invalid "jump" to the insn decoder,
+       so is dealt with as a special case */
+    fprintf_unfiltered (stream, "halt");
+    return (4);
+  }
+
+  for (i = 0; i < NOPCODES; i++)
+	  if (pyr_opcodes[i].datum.code == insn_opcode)
+		  break;
+
+  if (i == NOPCODES)
+	  /* FIXME: Handle unrecognised instructions better.  */
+	  fprintf_unfiltered (stream, "???\t#%08x\t(op=%x mode =%x)",
+		   insn, insn_decode.operator, insn_decode.mode);
+  else
+    {
+      /* Print the mnemonic for the instruction.  Pyramid insn operands
+         are so regular that we can deal with almost all of them
+         separately.
+	 Unconditional branches are an exception: they are encoded as
+	 conditional branches (branch if false condition, I think)
+	 with no condition specified. The average user will not be
+	 aware of this. To maintain their illusion that an
+	 unconditional branch insn exists, we will have to FIXME to
+	 treat the insn mnemnonic of all branch instructions here as a
+	 special case: check the operands of branch insn and print an
+	 appropriate mnemonic. */ 
+
+      fprintf_unfiltered (stream, "%s\t", pyr_opcodes[i].name);
+
+    /* Print the operands of the insn (as specified in
+       insn.operand_mode). 
+       Branch operands of branches are a special case: they are a word
+       offset, not a byte offset. */
+  
+    if (insn_decode.operator == 0x01 || insn_decode.operator == 0x02) {
+      register int bit_codes=(insn >> 16)&0xf;
+      register int i;
+      register int displacement = (insn & 0x0000ffff) << 2;
+
+      static char cc_bit_names[] = "cvzn";	/* z,n,c,v: strange order? */
+
+      /* Is bfc and no bits specified an unconditional branch?*/
+      for (i=0;i<4;i++) {
+	if ((bit_codes) & 0x1)
+		fputc_unfiltered (cc_bit_names[i], stream);
+	bit_codes >>= 1;
+      }
+
+      fprintf_unfiltered (stream, ",%0x",
+	       displacement + memaddr);
+      return (insn_size);
+    }
+
+      switch (operand_mode) {
+      case 0:
+	fprintf_unfiltered (stream, "%s,%s",
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno));
+	break;
+	    
+      case 1:
+	fprintf_unfiltered (stream, " 0x%0x,%s",
+		 op_1_regno,
+		 REGISTER_NAME (op_2_regno));
+	break;
+	
+      case 2:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream, " $0x%0x,%s",
+		 extra_1,
+		 REGISTER_NAME (op_2_regno));
+	break;
+      case 3:
+	fprintf_unfiltered (stream, " (%s),%s",
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno));
+	break;
+	
+      case 4:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream, " 0x%0x(%s),%s",
+		 extra_1,
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno));
+	break;
+	
+	/* S1 destination mode */
+      case 5:
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? "%s,(%s)[%s*%1d]" : "%s,(%s)"),
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      case 6:
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? " $%#0x,(%s)[%s*%1d]"
+		  : " $%#0x,(%s)"),
+		 op_1_regno,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      case 7:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? " $%#0x,(%s)[%s*%1d]"
+		  : " $%#0x,(%s)"),
+		 extra_1,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      case 8:
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? " (%s),(%s)[%s*%1d]" : " (%s),(%s)"),
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      case 9:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno)
+		  ? "%#0x(%s),(%s)[%s*%1d]"
+		  : "%#0x(%s),(%s)"),
+		 extra_1,
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+	/* S2 destination mode */
+      case 10:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? "%s,%#0x(%s)[%s*%1d]" : "%s,%#0x(%s)"),
+		 REGISTER_NAME (op_1_regno),
+		 extra_1,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+      case 11:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ?
+		  " $%#0x,%#0x(%s)[%s*%1d]" : " $%#0x,%#0x(%s)"),
+		 op_1_regno,
+		 extra_1,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+      case 12:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	read_memory (memaddr+8, buffer, MAXLEN);
+	insn_size += 4;
+	extra_2 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ?
+		  " $%#0x,%#0x(%s)[%s*%1d]" : " $%#0x,%#0x(%s)"),
+		 extra_1,
+		 extra_2,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      case 13:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno)
+		  ? " (%s),%#0x(%s)[%s*%1d]" 
+		  : " (%s),%#0x(%s)"),
+		 REGISTER_NAME (op_1_regno),
+		 extra_1,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+      case 14:
+	read_memory (memaddr+4, buffer, MAXLEN);
+	insn_size += 4;
+	extra_1 = * ((int *) buffer);
+	read_memory (memaddr+8, buffer, MAXLEN);
+	insn_size += 4;
+	extra_2 = * ((int *) buffer);
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? "%#0x(%s),%#0x(%s)[%s*%1d]"
+		  : "%#0x(%s),%#0x(%s) "),
+		 extra_1,
+		 REGISTER_NAME (op_1_regno),
+		 extra_2,
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	break;
+	
+      default:
+	fprintf_unfiltered (stream,
+		 ((index_reg_regno) ? "%s,%s [%s*%1d]" : "%s,%s"),
+		 REGISTER_NAME (op_1_regno),
+		 REGISTER_NAME (op_2_regno),
+		 REGISTER_NAME (index_reg_regno),
+		 index_multiplier);
+	fprintf_unfiltered (stream,
+		 "\t\t# unknown mode in %08x",
+		 insn);
+	break;
+      } /* switch */
+    }
+  
+  {
+    return insn_size;
+  }
+  abort ();
+}
diff --git a/gdb/pyr-xdep.c b/gdb/pyr-xdep.c
new file mode 100644
index 0000000..dd6d9a9
--- /dev/null
+++ b/gdb/pyr-xdep.c
@@ -0,0 +1,370 @@
+/* Low level Pyramid interface to ptrace, for GDB when running under Unix.
+   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+/* #include <fcntl.h>  Can we live without this?  */
+
+#include "gdbcore.h"
+#include <sys/user.h>		/* After a.out.h  */
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  register int datum;
+  register unsigned int regaddr;
+  int reg_buf[NUM_REGS+1];
+  struct user u;
+  register int skipped_frames = 0;
+
+  registers_fetched ();
+  
+  for (regno = 0; regno < 64; regno++) {
+    reg_buf[regno] = ptrace (3, inferior_pid, (PTRACE_ARG3_TYPE) regno, 0);
+    
+#if defined(PYRAMID_CONTROL_FRAME_DEBUGGING)
+    printf_unfiltered ("Fetching register %s, got %0x\n",
+	    REGISTER_NAME (regno),
+	    reg_buf[regno]);
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+    
+    if (reg_buf[regno] == -1 && errno == EIO) {
+      printf_unfiltered("fetch_interior_registers: fetching register %s\n",
+	     REGISTER_NAME (regno));
+      errno = 0;
+    }
+    supply_register (regno, reg_buf+regno);
+  }
+  /* that leaves regs 64, 65, and 66 */
+  datum = ptrace (3, inferior_pid,
+		  (PTRACE_ARG3_TYPE) (((char *)&u.u_pcb.pcb_csp) -
+		  ((char *)&u)), 0);
+  
+  
+  
+  /* FIXME: Find the Current Frame Pointer (CFP). CFP is a global
+     register (ie, NOT windowed), that gets saved in a frame iff
+     the code for that frame has a prologue (ie, "adsf N").  If
+     there is a prologue, the adsf insn saves the old cfp in
+     pr13, cfp is set to sp, and N bytes of locals are allocated
+     (sp is decremented by n).
+     This makes finding CFP hard. I guess the right way to do it
+     is: 
+     - If this is the innermost frame, believe ptrace() or
+     the core area.
+     - Otherwise:
+     Find the first insn of the current frame.
+     - find the saved pc;
+     - find the call insn that saved it;
+     - figure out where the call is to;
+     - if the first insn is an adsf, we got a frame
+     pointer. */
+  
+  
+  /* Normal processors have separate stack pointers for user and
+     kernel mode. Getting the last user mode frame on such
+     machines is easy: the kernel context of the ptrace()'d
+     process is on the kernel stack, and the USP points to what
+     we want. But Pyramids only have a single cfp for both user and
+     kernel mode.  And processes being ptrace()'d have some
+     kernel-context control frames on their stack.
+     To avoid tracing back into the kernel context of an inferior,
+     we skip 0 or more contiguous control frames where the pc is
+     in the kernel. */ 
+  
+  while (1) {
+    register int inferior_saved_pc;
+    inferior_saved_pc = ptrace (1, inferior_pid,
+				(PTRACE_ARG3_TYPE) (datum+((32+15)*4)), 0);
+    if (inferior_saved_pc > 0) break;
+#if defined(PYRAMID_CONTROL_FRAME_DEBUGGING)
+    printf_unfiltered("skipping kernel frame %08x, pc=%08x\n", datum,
+	   inferior_saved_pc);
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+    skipped_frames++;
+    datum -= CONTROL_STACK_FRAME_SIZE;
+  }
+  
+  reg_buf[CSP_REGNUM] = datum;
+  supply_register(CSP_REGNUM, reg_buf+CSP_REGNUM);
+#ifdef  PYRAMID_CONTROL_FRAME_DEBUGGING
+  if (skipped_frames) {
+    fprintf_unfiltered (gdb_stderr,
+	     "skipped %d frames from %x to %x; cfp was %x, now %x\n",
+	     skipped_frames, reg_buf[CSP_REGNUM]);
+  }
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  if (regno >= 0)
+    {
+      if ((0 <= regno) && (regno < 64)) {
+	/*regaddr = register_addr (regno, offset);*/
+	regaddr = regno;
+	errno = 0;
+	ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		read_register (regno));
+	if (errno != 0)
+	  {
+	    sprintf (buf, "writing register number %d", regno);
+	    perror_with_name (buf);
+	  }
+      }
+    }
+  else
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	{
+	  /*regaddr = register_addr (regno, offset);*/
+	  regaddr = regno;
+	  errno = 0;
+	  ptrace (6, inferior_pid, (PTRACE_ARG3_TYPE) regaddr,
+		  read_register (regno));
+	  if (errno != 0)
+	    {
+	      sprintf (buf, "writing all regs, number %d", regno);
+	      perror_with_name (buf);
+	    }
+	}
+}
+
+/*** Extensions to  core and dump files, for GDB. */
+
+extern unsigned int last_frame_offset;
+
+#ifdef PYRAMID_CORE
+
+/* Can't make definitions here static, since corefile.c needs them
+   to do bounds checking on the core-file areas. O well. */
+
+/* have two stacks: one for data, one for register windows. */
+extern CORE_ADDR reg_stack_start;
+extern CORE_ADDR reg_stack_end;
+
+/* need this so we can find the global registers: they never get saved. */
+CORE_ADDR global_reg_offset;
+static CORE_ADDR last_frame_address;
+CORE_ADDR last_frame_offset;
+
+
+/* Address in core file of start of register window stack area.
+   Don't know if is this any of meaningful, useful or necessary.   */
+extern int reg_stack_offset;
+
+#endif /* PYRAMID_CORE */  
+
+
+/* Work with core dump and executable files, for GDB. 
+   This code would be in corefile.c if it weren't machine-dependent. */
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  extern char registers[];
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+
+#ifdef PYRAMID_CORE
+  reg_stack_start = CONTROL_STACK_ADDR;
+  reg_stack_end = CONTROL_STACK_ADDR;	/* this isn't strictly true...*/
+#endif /* PYRAMID_CORE */
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
+      {
+	struct user u;
+
+	unsigned int reg_offset;
+
+	val = myread (corechan, &u, sizeof u);
+	if (val < 0)
+	  perror_with_name ("Not a core file: reading upage");
+	if (val != sizeof u)
+	  error ("Not a core file: could only read %d bytes", val);
+	data_start = exec_data_start;
+
+	data_end = data_start + NBPG * u.u_dsize;
+	data_offset = NBPG * UPAGES;
+	stack_offset = NBPG * (UPAGES + u.u_dsize);
+
+	/* find registers in core file */
+#ifdef PYRAMID_PTRACE
+	stack_start = stack_end - NBPG * u.u_ussize;
+	reg_stack_offset = stack_offset + (NBPG *u.u_ussize);
+	reg_stack_end = reg_stack_start + NBPG * u.u_cssize;
+
+	last_frame_address = ((int) u.u_pcb.pcb_csp);
+	last_frame_offset = reg_stack_offset + last_frame_address
+		- CONTROL_STACK_ADDR ;
+	global_reg_offset = (char *)&u - (char *)&u.u_pcb.pcb_gr0 ;
+
+	/* skip any control-stack frames that were executed in the
+	   kernel. */
+
+	while (1) {
+	    char buf[4];
+	    val = lseek (corechan, last_frame_offset+(47*4), 0);
+	    if (val < 0)
+		    perror_with_name (filename);
+	    val = myread (corechan, buf, sizeof buf);
+	    if (val < 0)
+		    perror_with_name (filename);
+
+	    if (*(int *)buf >= 0)
+		    break;
+	    printf_unfiltered ("skipping frame %s\n", local_hex_string (last_frame_address));
+	    last_frame_offset -= CONTROL_STACK_FRAME_SIZE;
+	    last_frame_address -= CONTROL_STACK_FRAME_SIZE;
+	}
+	reg_offset = last_frame_offset;
+
+#if 1 || defined(PYRAMID_CONTROL_FRAME_DEBUGGING)
+	printf_unfiltered ("Control stack pointer = %s\n",
+		local_hex_string (u.u_pcb.pcb_csp));
+	printf_unfiltered ("offset to control stack %d outermost frame %d (%s)\n",
+	      reg_stack_offset, reg_offset, local_hex_string (last_frame_address));
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+
+#else /* not PYRAMID_CORE */
+	stack_start = stack_end - NBPG * u.u_ssize;
+        reg_offset = (int) u.u_ar0 - KERNEL_U_ADDR;
+#endif /* not PYRAMID_CORE */
+
+#ifdef __not_on_pyr_yet
+	/* Some machines put an absolute address in here and some put
+	   the offset in the upage of the regs.  */
+	reg_offset = (int) u.u_ar0;
+	if (reg_offset > NBPG * UPAGES)
+	  reg_offset -= KERNEL_U_ADDR;
+#endif
+
+	/* I don't know where to find this info.
+	   So, for now, mark it as not available.  */
+	N_SET_MAGIC (core_aouthdr, 0);
+
+	/* Read the register values out of the core file and store
+	   them where `read_register' will find them.  */
+
+	{
+	  register int regno;
+
+	  for (regno = 0; regno < 64; regno++)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      val = lseek (corechan, register_addr (regno, reg_offset), 0);
+	      if (val < 0
+		  || (val = myread (corechan, buf, sizeof buf)) < 0)
+		{
+		  char * buffer = (char *) alloca (strlen (REGISTER_NAME (regno))
+						   + 30);
+		  strcpy (buffer, "Reading register ");
+		  strcat (buffer, REGISTER_NAME (regno));
+						   
+		  perror_with_name (buffer);
+		}
+
+	      if (val < 0)
+		perror_with_name (filename);
+#ifdef PYRAMID_CONTROL_FRAME_DEBUGGING
+      printf_unfiltered ("[reg %s(%d), offset in file %s=0x%0x, addr =0x%0x, =%0x]\n",
+	      REGISTER_NAME (regno), regno, filename,
+	      register_addr(regno, reg_offset),
+	      regno * 4 + last_frame_address,
+	      *((int *)buf));
+#endif /* PYRAMID_CONTROL_FRAME_DEBUGGING */
+	      supply_register (regno, buf);
+	    }
+	}
+      }
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	{
+	  corefile = concat (current_directory, "/", filename, NULL);
+	}
+
+#if 1 || defined(PYRAMID_CONTROL_FRAME_DEBUGGING)
+      printf_unfiltered ("Providing CSP (%s) as nominal address of current frame.\n",
+	      local_hex_string(last_frame_address));
+#endif PYRAMID_CONTROL_FRAME_DEBUGGING
+      /* FIXME: Which of the following is correct? */
+#if 0
+      set_current_frame ( create_new_frame (read_register (FP_REGNUM),
+					    read_pc ()));
+#else
+      set_current_frame ( create_new_frame (last_frame_address,
+					    read_pc ()));
+#endif
+
+      select_frame (get_current_frame (), 0);
+      validate_files ();
+    }
+  else if (from_tty)
+    printf_unfiltered ("No core file now.\n");
+}
diff --git a/gdb/rdi-share/Makefile.am b/gdb/rdi-share/Makefile.am
new file mode 100644
index 0000000..9d63d1c
--- /dev/null
+++ b/gdb/rdi-share/Makefile.am
@@ -0,0 +1,19 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+noinst_LIBRARIES = libangsd.a
+
+libangsd_a_SOURCES =  ardi.c bytesex.c crc.c devsw.c drivers.c etherdrv.c \
+                      hostchan.c hsys.c logging.c msgbuild.c params.c rx.c \
+                      serdrv.c serpardr.c tx.c unixcomm.c
+
+noinst_HEADERS = adp.h adperr.h angel.h ardi.h armdbg.h buffers.h bytesex.h \
+                 chandefs.h channels.h chanpriv.h crc.h dbg_conf.h dbg_cp.h \
+                 dbg_hif.h dbg_rdi.h devclnt.h devices.h devsw.h drivers.h \
+                 endian.h ethernet.h host.h hostchan.h hsys.h logging.h \
+                 msgbuild.h params.h rxtx.h sys.h unixcomm.h
+
+EXTRA_DIST = README.CYGNUS
+
+INCLUDES =  -DRETRANS -DARM_RELEASE='"Berkeley Licence for Cygnus"'
diff --git a/gdb/rdi-share/Makefile.in b/gdb/rdi-share/Makefile.in
new file mode 100644
index 0000000..1141005
--- /dev/null
+++ b/gdb/rdi-share/Makefile.in
@@ -0,0 +1,293 @@
+# Makefile.in generated automatically by automake 1.3b from Makefile.am
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+EXEEXT = @EXEEXT@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = cygnus
+
+noinst_LIBRARIES = libangsd.a
+
+libangsd_a_SOURCES =  ardi.c bytesex.c crc.c devsw.c drivers.c etherdrv.c \
+                      hostchan.c hsys.c logging.c msgbuild.c params.c rx.c \
+                      serdrv.c serpardr.c tx.c unixcomm.c
+
+noinst_HEADERS = adp.h adperr.h angel.h ardi.h armdbg.h buffers.h bytesex.h \
+                 chandefs.h channels.h chanpriv.h crc.h dbg_conf.h dbg_cp.h \
+                 dbg_hif.h dbg_rdi.h devclnt.h devices.h devsw.h drivers.h \
+                 endian.h ethernet.h host.h hostchan.h hsys.h logging.h \
+                 msgbuild.h params.h rxtx.h sys.h unixcomm.h
+
+EXTRA_DIST = README.CYGNUS
+
+INCLUDES =  -DRETRANS -DARM_RELEASE='"Berkeley Licence for Cygnus"'
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
+CONFIG_CLEAN_FILES = 
+LIBRARIES =  $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir) 
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libangsd_a_LIBADD = 
+libangsd_a_OBJECTS =  ardi.o bytesex.o crc.o devsw.o drivers.o \
+etherdrv.o hostchan.o hsys.o logging.o msgbuild.o params.o rx.o \
+serdrv.o serpardr.o tx.o unixcomm.o
+AR = ar
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LINK = $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+HEADERS =  $(noinst_HEADERS)
+
+DIST_COMMON =  Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = tar
+GZIP = --best
+SOURCES = $(libangsd_a_SOURCES)
+OBJECTS = $(libangsd_a_OBJECTS)
+
+all: Makefile $(LIBRARIES) $(HEADERS)
+
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: @MAINT@Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINT@ configure.in 
+	cd $(srcdir) && $(ACLOCAL)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.c.o:
+	$(COMPILE) -c $<
+
+.s.o:
+	$(COMPILE) -c $<
+
+.S.o:
+	$(COMPILE) -c $<
+
+mostlyclean-compile:
+	-rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+	-rm -f *.tab.c
+
+maintainer-clean-compile:
+
+libangsd.a: $(libangsd_a_OBJECTS) $(libangsd_a_DEPENDENCIES)
+	-rm -f libangsd.a
+	$(AR) cru libangsd.a $(libangsd_a_OBJECTS) $(libangsd_a_LIBADD)
+	$(RANLIB) libangsd.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+	here=`pwd` && cd $(srcdir) \
+	  && mkid -f$$here/ID $(SOURCES) $(HEADERS) $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)'; \
+	unique=`for i in $$list; do echo $$i; done | \
+	  awk '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+	-rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-rm -rf $(distdir)
+	GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+	cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist
+	-rm -rf $(distdir)
+	@echo "========================"; \
+	echo "$(distdir).tar.gz is ready for distribution"; \
+	echo "========================"
+dist: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+dist-all: distdir
+	-chmod -R a+r $(distdir)
+	GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir)
+	-rm -rf $(distdir)
+distdir: $(DISTFILES)
+	-rm -rf $(distdir)
+	mkdir $(distdir)
+	-chmod 777 $(distdir)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  test -f $(distdir)/$$file \
+	  || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+	  || cp -p $$d/$$file $(distdir)/$$file; \
+	done
+info:
+dvi:
+check:
+installcheck:
+install-info:
+install-exec: 
+	@$(NORMAL_INSTALL)
+
+install-data: 
+	@$(NORMAL_INSTALL)
+
+install: install-exec install-data all
+	@:
+
+uninstall: 
+
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean:  mostlyclean-noinstLIBRARIES mostlyclean-compile \
+		mostlyclean-tags mostlyclean-generic
+
+clean:  clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
+		mostlyclean
+
+distclean:  distclean-noinstLIBRARIES distclean-compile distclean-tags \
+		distclean-generic clean
+	-rm -f config.status
+
+maintainer-clean:  maintainer-clean-noinstLIBRARIES \
+		maintainer-clean-compile maintainer-clean-tags \
+		maintainer-clean-generic distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	-rm -f config.status
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir info dvi installcheck \
+install-info install-exec install-data install uninstall all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/gdb/rdi-share/README.CYGNUS b/gdb/rdi-share/README.CYGNUS
new file mode 100644
index 0000000..4bf06c9
--- /dev/null
+++ b/gdb/rdi-share/README.CYGNUS
@@ -0,0 +1,6 @@
+This is a version of ARM's RDI library which has been been put under a
+free software license.
+
+See ARM's Software Development Tools Reference Manual (Remote
+Debugging chapter), and the file gdb/remote-rdi.c for information
+about how to use it.
diff --git a/gdb/rdi-share/aclocal.m4 b/gdb/rdi-share/aclocal.m4
new file mode 100644
index 0000000..55a8225
--- /dev/null
+++ b/gdb/rdi-share/aclocal.m4
@@ -0,0 +1,202 @@
+dnl aclocal.m4 generated automatically by aclocal 1.3b
+
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AM_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+
+# serial 1
+
+AC_DEFUN(AM_PROG_INSTALL,
+[AC_REQUIRE([AC_PROG_INSTALL])
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+AC_SUBST(INSTALL_SCRIPT)dnl
+])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  if test $USE_MAINTAINER_MODE = yes; then
+    MAINT=
+  else
+    MAINT='#M#'
+  fi
+  AC_SUBST(MAINT)dnl
+]
+)
+
+# Check to see if we're running under Win32, without using
+# AC_CANONICAL_*.  If so, set output variable EXEEXT to ".exe".
+# Otherwise set it to "".
+
+dnl AM_EXEEXT()
+dnl This knows we add .exe if we're building in the Cygwin
+dnl environment. But if we're not, then it compiles a test program
+dnl to see if there is a suffix for executables.
+AC_DEFUN(AM_EXEEXT,
+[AC_REQUIRE([AM_CYGWIN])
+AC_REQUIRE([AM_MINGW32])
+AC_MSG_CHECKING([for executable suffix])
+AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=
+for file in am_c_test.*; do
+   case $file in
+    *.c) ;;
+    *.o) ;;
+    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+   esac
+done
+rm -f am_c_test*])
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+AC_MSG_RESULT(${am_cv_exeext})
+AC_SUBST(EXEEXT)])
+
+# Check to see if we're running under Cygwin, without using
+# AC_CANONICAL_*.  If so, set output variable CYGWIN to "yes".
+# Otherwise set it to "no".
+
+dnl AM_CYGWIN()
+AC_DEFUN(AM_CYGWIN,
+[AC_CACHE_CHECK(for Cygwin environment, am_cv_cygwin,
+[AC_TRY_COMPILE(,[return __CYGWIN32__;],
+am_cv_cygwin=yes, am_cv_cygwin=no)
+rm -f conftest*])
+CYGWIN=
+test "$am_cv_cygwin" = yes && CYGWIN=yes])
+
+
+
+# Check to see if we're running under Mingw, without using
+# AC_CANONICAL_*.  If so, set output variable MINGW32 to "yes".
+# Otherwise set it to "no".
+
+dnl AM_MINGW32()
+AC_DEFUN(AM_MINGW32,
+[AC_CACHE_CHECK(for Mingw32 environment, am_cv_mingw32,
+[AC_TRY_COMPILE(,[return __MINGW32__;],
+am_cv_mingw32=yes, am_cv_mingw32=no)
+rm -f conftest*])
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes])
+
diff --git a/gdb/rdi-share/adp.h b/gdb/rdi-share/adp.h
new file mode 100644
index 0000000..099fa4d
--- /dev/null
+++ b/gdb/rdi-share/adp.h
@@ -0,0 +1,2528 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *
+ * INTRODUCTION
+ * ------------
+ * The early RDP message definitions were held in an ARM Ltd "armdbg"
+ * source file. Since the relevant header files were not exported
+ * publicly as part of an ARM Ltd core tools release, it was a problem
+ * for developers manipulating the target side of the protocol.
+ *
+ * For Angel, this new (ANSI 'C' clean) header file defines the ADP
+ * protocol. The header should be useable by both host and target
+ * systems, thus avoiding problems that can arise from duplicate
+ * definitions. Care has been taken in the construction of this header
+ * file to avoid any host/target differences.
+ *
+ * MESSAGE FORMAT
+ * --------------
+ * Format of the "data" section of debug and boot agent messages. This is
+ * the standard ADP (Angel Debug Protocol) message format:
+ *
+ *  unsigned32 reason     - Main debug reason code.
+ *  unsigned32 debugID    - Information describing host debug world;
+ *                        - private to host and used in any target initiated
+ *                          messages.
+ *  unsigned32 OSinfo1    \ Target OS information to identify process/thread
+ *  unsigned32 OSinfo2    / memory/world, etc. These two fields are target
+ *                          defined.
+ *  byte       args[n]    - Data for message "reason" code.
+ *
+ * NOTE: The message format is the same for single threaded debugging,
+ * except that the "OSinfo" fields should be -1 (0xFFFFFFFF). Even
+ * single-threaded debugging *MAY* have different host specified
+ * debugID values, so the Angel debug system will preserve the "debugID"
+ * information for replies, and the relevant asynchronous target-to-host
+ * messages. The "debugID" is defined by the host-end of the
+ * protocol, and is used by the host to ensure that messages are
+ * routed to the correct handler program/veneer.
+ *
+ * The reason there are two target specified "OSinfo" words is because
+ * thread identifiers may not be unique when processes/tasks have
+ * private virtual address spaces. It allows more flexibility when
+ * supporting multi-threaded or O/S aware debugging.
+ *
+ * NOTE: The reason that there is no "size" information, is that the
+ * message IDs themselves encode the format of any arguments. Also it
+  * would be a duplication of information used by the physical
+ * transport layer (which is distinct from this logical message
+ * layer). Any routing of messages through programs, hosts,
+ * etc. should be performed at the physical layer, or the boundaries
+ * between physical layers. i.e. packet received on socket in host,
+ * and transferred to serial packet for passing on down the line.
+ *
+ * NOTE: Pointers aren't passed in messages because they are dangerous in
+ * a multi-threaded environment.
+ *
+ * ADP REASON CODE
+ * ---------------
+ * The message reason codes contain some information that ties them to
+ * the channel and direction that the message will be used with. This
+ * will ensure that even if the message "#define name" is not
+ * completely descriptive, the message reason code is.
+ *
+ *      b31    = direction. 0=Host-to-Target; 1=Target-to-Host;
+ *      b30-28 = debug agent multi-threaded control (see below)
+ *      b27-24 = reserved. should be zero.
+ *      b23-16 = channelid. The fixed Angel channel number
+ *               (see "channels.h").
+ *      b15-0  = message reason code.
+ *
+ * It is unfortunate that to aid the error-checking capabilities of
+ * the Angel communications we have changed the message numbers from
+ * the original ARM Ltd RDP. However this also has benefits, in that
+ * the Angel work is meant to be a clean break.
+ *
+ * However, it isn't so bad since even though the numbers are
+ * different, the majority of the reason codes have exactly the same
+ * functionality as the original RDP messages.
+ *
+ * NOTES
+ * -----
+ * It would be ideal to use "rpcgen" (or some equivalent) to
+ * automatically maintain compatibility between the target and host
+ * ends of the protocol. However, ARM Ltd expressed that the message
+ * handling should be hand-coded, to avoid dependance on external
+ * tools.
+ *
+ * All other channels have undefined data formats and are purely
+ * application defined. The C library "_sys_" support will provide a
+ * veneer to perform message block operations as required.
+ *
+ * It is IMPLIED that all of the ADP messages will fit within the
+ * buffer DATASIZE. This has a minimum value, calculated from
+ * BUFFERMINSIZE.
+ *
+ * All messages are passed and received to the channel system in little
+ * endian order (ie. use little endian order when writing a word as
+ * a sequence of bytes within a message).
+ *
+ * A reply / acknowledgement to an ADP message is always sent and has the
+ * same reason code as the original except that the TtoH / HtoT bit is
+ * reversed.  This makes it simple to check that the reply really
+ * is a reply to the message which was just sent!  [Boot Channel messages
+ * also require that this protocol is used].
+ */
+
+#ifndef angel_adp_h
+#define angel_adp_h
+
+#include "chandefs.h"
+
+
+/*
+ * Buffer minimum sizes
+ */
+
+/* the minimum target internal size */
+#define ADP_BUFFER_MIN_SIZE (256)
+
+/* a word is always reserved for internal use in the target */
+#define ADP_BUFFER_MAX_INTERNAL (sizeof(word))
+
+/* the minimum available data portion */
+#define ADP_BUFFER_MIN_DATASIZE \
+    (ADP_BUFFER_MIN_SIZE - ADP_BUFFER_MAX_INTERNAL - CHAN_HEADER_SIZE)
+
+/*
+ * the space taken up by the standard ADP header
+ * (reason, debugID, OSinfo1, OSinfo2)
+ */
+#define ADP_DEFAULT_HEADER_SIZE (4*sizeof(word))
+
+
+/* 8bit ADP version identification */
+#define ADPVSN  (0x03)
+/* This value can be used to identify the protocol version supported
+ * by target or host systems. This version number should only be
+ * changed if the protocol undergoes a non-backward compatible
+ * change. It should *NOT* be used to reflect extensions to the
+ * protocol. Such extensions can be added to the existing protocol
+ * version by allocating new reason codes, and by extending the
+ * ADP_Info message to identify new features.
+ */
+
+/* The following value is used in the OSinfo fields for
+ * single-threaded messages, or where the host wants to alter the
+ * global CPU state. NOTE: The "debugID" field should always be
+ * defined by the host, and returned in target initiated messages. The
+ * only exception to this rule is the ADP_Booted message at the
+ * start-of-day.
+ */
+#define ADP_HandleUnknown (-1)
+
+/******************************************************************
+ *
+ * ADP reason code subfields
+ *
+ */
+
+/* The following bits are used to describe the basic direction of
+ * messages. This allows some extra checking of message validity to be
+ * performed, as well as providing a description of the message that
+ * may not be available in the "cpp" macro:
+ */
+#define HtoT    ((unsigned)0 << 31)     /* Host-to-Target message */
+#define TtoH    ((unsigned)1 << 31)     /* Target-to-Host message */
+
+/* The following bits are used to control how the target system
+ * executes whilst processing messages. This allows for O/S specific
+ * host-based debug programs to interrogate system structures whilst
+ * ensuring that the access is atomic within the constraints imposed
+ * by the target O/S.
+ *
+ * NOTE: That only the channel is inserted into the reason code
+ * automatically.  Thus both direction and multi thread control bits
+ * must be added by the host / target.
+ */
+/* Disable FIQ whilst processing message */
+#define DisableFIQ              (1 << 30)
+/* Disable IRQ whilst processing message */
+#define DisableIRQ              (1 << 29)
+/* Disable O/S pre-emption whilst processing message */
+#define DisablePreemption       (1 << 28)
+
+/* The channel identification number is held in the reason code as a
+ * check:
+ */
+#define ADPCHANNEL(b)   (((b) & 0xFF) << 16)
+
+/* The following macro constructs the reason code number, from the
+ * various fields - note that the direction is NOT inlcuded since
+ * this depends on whether the Host or Target system is including
+ * this file!
+ */
+#define ADPREASON(c,r)        (ADPCHANNEL(c) | ((r) & 0xFFFF))
+
+/* This macros is used when constructing manifests for sub-reason
+ * codes. At the moment it is identical to the main reason macro. If
+ * desired we could add a new bit that explicitly identifies the value
+ * as a sub-reason code, where the corresponding bit in the main
+ * message ID would be zero.
+ */
+#define ADPSUBREASON(c,r)     (ADPCHANNEL(c) | ((r) & 0xFFFF))
+
+/* All other undefined bits are reserved, and should be zero. */
+
+
+
+/*****************************************************************
+ *
+ * channel_BOOT messages
+ *
+ */
+
+/* The BOOT agent only supports a few messages. They are used purely
+ * to control the "start-of-day" connection to a host program. All
+ * Angel systems with host communications *MUST* provide the BOOT
+ * agent, even if they don't have support for either the single- or
+ * multi-threaded debug agents.
+ *
+ * The way the BOOT channel will be used on startup will be as follows:
+ *
+ * a) Target board is powered up before host debugger is invoked
+ *
+ * After switching on the target and initialisation is completed the
+ * target will send an ADP_Booted or ADP_Reset message.  The debugger
+ * has not been started yet so this message will not be received.  In
+ * a serial world this makes it important that any buffers on the host
+ * side are flushed during initialisation of the debugger, and in an
+ * Ethernet world it makes it important that the target can cope with the
+ * message not being received.
+ *
+ * Eventually the Debugger will be started up and will send an
+ * ADP_Reboot or ADP_Reset request.  The target will respond to this with
+ * an ADP_Reboot or ADP_Reset acknowldege and will then reboot, finally
+ * sending an ADP_Rebooted when it has done all it needs to do (very little
+ * in the case of ADP_Reset, but completely rebooting in the case of
+ * ADP_Reboot).  Note that it is important that an ADP_Rebooted message is
+ * sent so that the Debugger does not attempt to send any data after it has
+ * made a request to ADP_Reboot and before it receives an ADP_Rebooted, as
+ * data can be lost be the target during this time.
+ *
+ * The target and host are now ready to start a debug session.
+ *
+ * b) Target board is powered up after host debugger is invoked
+ *
+ * The debugger will send an ADP_Reboot or ADP_Reset request, but will
+ * receive no reply until the target is powered up.
+/ *
+ * When the target is powered up then it will send an ADP_Rebooted
+ * message to the debugger.  The debugger should accept this message
+ * even though it has received no ADP_Reboot or ADP_Reset acknowldege message
+ * from the target.
+ *
+ * The target and host are now ready to start a debug session.
+ *
+ *
+ * If at any point during the bootup sequence and ADP messages are
+ * sent down the S_DBG channel then they should be responded to with a
+ * RDI_NotInitialised error. [This should never happen however].
+ *
+ * An ADP_Boot or ADP Rebooted message should be accepted at
+ * any point, since it is possible for a catastrophe to occur (such as
+ * disconnecteing the host and target during a debug message) which
+ * requires that one or other end be reset.
+ *
+ */
+
+/*
+ * A list of parameter types - for now just baud rate
+ */
+typedef enum ADP_Parameter {
+    AP_PARAMS_START = 0xC000,
+    AP_BAUD_RATE = AP_PARAMS_START,
+    /* extra parameters go in here */
+#ifdef TEST_PARAMS
+    AP_CAFE_MENU,               /* extra just for testing */
+#endif
+    AP_PARAMS_END
+} ADP_Parameter;
+
+#define AP_NUM_PARAMS (AP_PARAMS_END - AP_PARAMS_START)
+
+/*
+ * Parameter types should have associated semantics which can be represented
+ * within one word per parameter, or an associated enum for choices.
+ *
+ * AP_BAUD_RATE: the word contains the exact baud rate, eg. 9600, 38400.
+ */
+
+/* this is not strictly necessary, but it's an example */
+typedef enum ADP_BaudRate {
+    AB_9600  =  9600,
+    AB_19200 = 19200,
+    AB_38400 = 38400,
+    AB_57600 = 57600,
+    AB_115200 = 115200
+} ADP_BaudRate;
+
+#define AB_NUM_BAUD_RATES 5     /* this is more useful, for sizing arrays */
+
+/* This must be set to the max number of options per parameter type */
+#define AP_MAX_OPTIONS (AB_NUM_BAUD_RATES)
+
+
+#define ADP_Booted      ADPREASON(CI_TBOOT,0)
+/* This message is sent by the target after the Angel system has been
+ * initialised.  This message also contains information describing the
+ * Angel world. The information can then be used to check that the
+ * target debug agent and source debugger are compatible.
+ *
+ * Message arguments:
+ *      word    Angel message default buffer size.
+ *      word    Angel message large buffer size (may be same as default)
+ *      word    Angel version ; inc. type (e.g. boot ROM) See (1)
+ *      word    ADP version.  See (2)
+ *      word    ARM Architecture info See (3)
+ *      word    ARM CPU information ; including target endianness. See (4)
+ *      word    Target hardware status. See (5)
+ *      word    Number of bytes in banner message
+ *      bytes   Startup banner message (single-threaded readable
+ *              descriptive text - NOT NULL terminated).
+ *
+ * Reply:
+ *      word    status
+ *
+ *      'status' returns RDIError_NoError for success, and otherwise
+ *      indicates an error.
+ */
+
+/* Angel version word [Reference(1)] : */
+/* Angel version number is a 16bit BCD value */
+#define ADP_ANGELVSN_MASK           (0x0000FFFF)
+#define ADP_ANGELVSN_SHIFT          (0)
+
+/* Type of Angel system */
+#define ADP_ANGELVSN_TYPE_MASK      (0x00FF0000)
+#define ADP_ANGELVSN_TYPE_SHIFT     (16)
+
+typedef enum {
+ ADP_AngelType_bootROM, /* Simple ROM system providing download capability */
+ ADP_AngelType_appROM,  /* ROM based application */
+ ADP_AngelType_appDLOAD,/* Downloaded Angel based application */
+ ADP_AngelType_Last     /* Unknown type. This typedef can be extended */
+                        /* but if the host and target vsns differ */
+                        /* Then one will spot that it dies not understand */
+} ADP_Angel_Types ;     /* this field and can whinge appropriately */
+
+/* First unknown ADP_AngelType */
+#define ADP_ANGELVSN_UNKTYPE_MASK   (0xFF000000)
+#define ADP_ANGELVSN_UNKYPE_SHIFT   (24)
+
+/* Currently only 8 bits are used in the word: */
+/* ADP protocol supported by target [Reference (2)] */
+#define ADP_ANGELVSN_ADP_MASK       (0x000000FF)
+#define ADP_ANGELVSN_ADP_SHIFT      (0)
+
+/* ARM Architecture info: [Reference (3)] */
+/* ARM Architecture Verson of target CPU */
+#define ADP_ARM_ARCH_VSN_MASK       (0x000000FF)
+#define ADP_ARM_ARCH_VSN_SHIFT      (0)
+/* Does the processor support the Thumb Instruction Set */
+#define ADP_ARM_ARCH_THUMB          (0x80000000)
+/* Does the processor support Long Multiplies */
+#define ADP_ARM_ARCH_LONGMUL        (0x40000000)
+/* All other flags are current undefined, and should be zero. */
+
+/* The following flags describe the feature set of the processor: */
+/* Set if cpu supports little-endian model [Reference (4)] */
+#define ADP_CPU_LE              (1 << 0)
+/* Set if cpu supports big-endian model */
+#define ADP_CPU_BE              (1 << 1)
+/* Set if processor has a cache */
+#define ADP_CPU_CACHE           (1 << 2)
+/* Set if processor has a MMU */
+#define ADP_CPU_MMU             (1 << 3)
+/* All other flags are current undefined, and should be zero. */
+
+/* The following flags reflect current Target hardware status: */
+/* [Reference (5)] */
+/* 0 = no MMU or MMU off; 1 = MMU on */
+#define ADP_CPU_MMUOn           (1 << 29)
+/* 0 = no cache or cache off; 1 = cache on */
+#define ADP_CPU_CacheOn         (1 << 30)
+/* 0 = little-endian; 1 = big-endian */
+#define ADP_CPU_BigEndian       (1U << 31)
+/* All other flags are current undefined, and should be zero. */
+
+
+#ifdef LINK_RECOVERY
+
+#define ADP_TargetResetIndication       ADPREASON(CI_TBOOT, 1)
+/*
+ * If parameter negotiation is enabled at the target, it configures itself
+ * to various likely parameter settings and sends this message at each
+ * configuration.  The message describes the default settings, and after
+ * sending at each configuration the target sets itself to the defaults
+ * it has just broadcast, to await either an ack on TBOOT or a request
+ * or reset indication on HBOOT.
+ *
+ * If the host receives this message successfully, it should reset to the
+ * indicated parameters and send a reply.
+ *
+ * Message arguments:
+ *      word    status                   (always 0, makes body same as
+ *                                        ADP_ParamNegotiate response)
+ *      word    n-parameters
+ *      n-parameters * {
+ *              word    ADP_Parameter
+ *              word    parameter-value
+ *      }
+ *
+ * Reply:
+ *      -       empty acknowledgement
+ */
+
+#endif /* def LINK_RECOVERY */
+
+typedef enum ADP_Boot_Ack {
+    AB_NORMAL_ACK,              /* will comply, immediate booted message */
+    AB_LATE_ACK,                /* will comply, late startup */
+    AB_ERROR                    /* cannot comply */
+} ADP_Boot_Ack;
+
+/* If the host sets neither of these in the word sent on a Reset / Reboot
+ * then it doesn;t care about the endianess of the target
+ */
+#define ADP_BootHostFeature_LittleEnd 0x80000000
+#define ADP_BootHostFeature_BigEnd    0x40000000
+
+#define ADP_Reboot      ADPREASON(CI_HBOOT,2)
+/* This message is sent when the host wants the target system to be
+ * completely reset, back to the boot monitor Angel. This is the
+ * method of the host forcing a cold-reboot.
+ * Note that an acknowledgement message will be sent immediately and
+ * that this must be sent before the target can reset.
+ *
+ * The parameter to this function is a bitset of host supported
+ * features. (in fact the same as ADP_Reset below.  This can be used by
+ * the target system to avoid using debug channel bandwidth raising
+ * messages that will be ignored by the host.
+ *
+ * Parameters:
+ *      word    host supported features (see above)
+ *
+ * Reply:
+ *      word    status, one of enum ADP_Boot_Ack above.
+ *
+ * Currently there are no such features defined, so the word indicating
+ * host supported features should be set to 0.
+ */
+
+
+
+#define ADP_Reset       ADPREASON(CI_HBOOT,3)
+/* This message is a request from the host, which should eventually
+ * result in the "ADP_Booted" message being sent by the target.
+ * Note that an acknowledgement message will be sent immediately and
+ * that this must be sent before the target can reset.
+ * This reset message is *ALWAYS* treated as a warm boot, with the target
+ * preserving as much state as possible.
+ *
+ * The parameter to this function is a bitset of host supported
+ * features. This can be used by the target system to avoid using
+ * debug channel bandwitdth raising messages that will be ignored by
+ * the host.
+ *
+ * Parameters:
+ *      word    host supported features (see above)
+ *
+ * Reply:
+ *      word    status, one of enum ADP_Boot_Ack above.
+ *
+ * Currently there are no such features defined, so the word indicating
+ * host supported features should be set to 0.
+ */
+
+
+#ifdef LINK_RECOVERY
+
+#define ADP_HostResetIndication         ADPREASON(CI_HBOOT, 4)
+/*
+ * This is as for ADP_TargetResetIndication, but is sent by the host when
+ * it first starts up in case the target is listening at a non-default
+ * setting.  Having sent at various configurations, the host then listens
+ * at the defaults it has just broadcast, to await either an ack on HBOOT
+ * or a reset indication on TBOOT.
+ *
+ * For arguments and reply, see ADP_TargetResetIndication.
+ */
+
+#endif /* def LINK_RECOVERY */
+
+
+#define ADP_ParamNegotiate              ADPREASON(CI_HBOOT, 5)
+/*
+ * The host sends this messages to negotiate new parameters with the target.
+ * For each parameter the host specifies a range of possibilities, starting
+ * with the most favoured.  All possible combinations of parameters
+ * must be valid.
+ *
+ * If the target can operate at a combination of the offered parameters,
+ * it will reply with the parameters it is willing to use.  AFTER sending
+ * the reply, the target switches to this combination.  On receiving the
+ * reply, the host will switch to the new combination and send a LinkCheck
+ * message (see below).
+ *
+ * If the target cannot operate at any combination of the offered parameters,
+ * it will reply with an error status.
+ *
+ * Message arguments:
+ *      word    n-parameter-blocks
+ *      n-parameter-blocks * {
+ *              word    ADP_Parameter
+ *              word    n-options
+ *              n-options * { word      parameter-value }
+ *      }
+ *
+ * Reply:
+ *      word    status
+ *      if (status == RDIError_NoError) {
+ *              word    n-parameters
+ *              n-parameters * {
+ *                      word    ADP_Parameter
+ *                      word    chosen-value
+ *              }
+ *      }
+ */
+
+#define ADP_LinkCheck                   ADPREASON(CI_HBOOT, 6)
+/*
+ * This should be the first message that the host sends after a successful
+ * parameter negotiation.  It is really just a 'ping'.
+ *
+ * Message arguments:
+ *      -       empty message
+ *
+ * Reply:
+ *      -       empty acknowledgement
+ */
+
+
+/********************************************************************
+ *
+ * CI_HADP messages
+ *
+ */
+
+#define ADP_HADPUnrecognised        ADPREASON(CI_HADP,0)
+/* This message is unusual in that it is normally sent in reply to
+ * another message which is not understood.  This is an exception
+ * to the normal protocol which says that a reply must have the
+ * same base reason code as the original.  There is a single reply
+ * parameter which is the reason code which was not understood.
+ *
+ * As well as being a reply this message can also be sent and will
+ * return as if this message were unrecognised!
+ *
+ * Parameters:
+ *      none
+ *
+ * Reply:
+ *      word    reason code which was not recognised
+ */
+
+
+#define ADP_Info                ADPREASON(CI_HADP,1)
+/* This is the new ADP information message. It is used to interrogate
+ * the target debug agent.  It provides information on the processor,
+ * as well as the state of the debug world. This allows the host to
+ * configure itself to the capabilities of the target.
+ *
+ * We try not to use feature bitsets, since we could quickly run out
+ * of known bits.  Thus when the feature set is extended, this can be
+ * done in a couple of supported ways:
+ *
+ *  If an undivided reason code is to be added (no reason subcodes)
+ *  then add a new ADP_Info code which responds with a flag indicating
+ *  whether that feature is supported by the target.  If this has not
+ *  even been implemented then the reply will be ADP_HADPUnrecognised
+ *
+ *  If a reason code which is subdivided into reason subcodes is
+ *  added then reason subcode 0 should be set aside to indicate
+ *  whether the functionality of that reason code is supported
+ *  by the target.  If it is not even implemented then the reply will
+ *  be ADP_Unrecognised.
+ *
+ * The first parameter to ADP_Info is a reason subcode, and subsequent
+ * parameters are defined by that subcode
+ *
+ * Parameters:
+ *      word         reason subcode
+ *      other arguments as reason subcode determines.
+ *
+ * Reply:
+ *      word         reason subcode
+ *      other argument as reason subcode determines
+ */
+
+/* ADP_Info reason subcodes: */
+
+
+
+#define ADP_Info_NOP                    ADPSUBREASON(CI_HADP,0)
+/* ADP_Info_NOP
+ * ------------
+ * Summary: This message is used to check for ADP_Info being supported.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' returns RDIError_NoError for success, non-zero indicates an error.
+ * If an error is returned then there is no handler for the ADP_Info
+ * message. The normal action will be to return an OK status.
+ */
+
+
+#define ADP_Info_Target                 ADPSUBREASON(CI_HADP,1)
+/* ADP_Info_Target
+ * ---------------
+ * Summary:
+ * This reason code is used to interrogate target system details.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word bitset, word model)
+ *
+ * 'status' is RDIError_NoError to indicate OK, or non-zero to indicate
+ * some sort of error.
+ * 'bitset' is described in more detail below, and is mostly compatible
+ * with the old RDI/RDP system to avoid gratuitous changes to the debugger
+ * toolbox.
+ * 'model' is the target hardware ID word, as returned by the ADP_Booted
+ * message.
+ *
+ * NOTE: The minimum and maximum protocol levels are no longer supported.
+ * It is the Angel view that debugging complexity should be shifted to the
+ * host if at all possible.  This means that the host debugger should
+ * always try to configure itself to the features available in the target
+ * debug agent.  This can be done by checking individual messages, rather
+ * than by a blanket version number dictating the feature set.
+ */
+
+/* 'bitset':- */
+/* Target speed in instructions per second = 10**(bits0..3). */
+#define ADP_Info_Target_LogSpeedMask         (0xF)
+
+/* Target is running on [0 = emulator / 1 = hardware] */
+#define ADP_Info_Target_HW                   (1 << 4)
+
+/* Bits 5..10 are currently undefined and should be zero. */
+/* Other bis are kept the same as the RDP in order to */
+/* eliminate the need to change the position of some bits */
+
+/* If set then the debug agent can be reloaded. */
+#define ADP_Info_Target_CanReloadAgent       (1 << 11)
+
+/* Can request AngelBufferSize information. */
+#define ADP_Info_Target_CanInquireBufferSize (1 << 12)
+
+/* Bit 13 is no longer required as it inquired whether
+ * a special RDP Interrupt code was supported
+ */
+
+/* Debug agent can perform profiling. */
+#define ADP_Info_Target_Profiling            (1 << 14)
+
+/* Debug agent can support Thumb code. */
+#define ADP_Info_Target_Thumb                (1 << 15)
+
+/* Bit 16 was the communications channel check.
+ * This is always available on Angel systems.
+ */
+
+#define ADP_Info_Points                 ADPSUBREASON(CI_HADP,2)
+/* ADP_Info_Points
+ * ---------------
+ * Summary: Returns a 32bit wide bitset of break- and watch-point
+ * features supported by the target debug agent.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word breakinfo)
+ *
+ * 'status' returns RDIError_NoError on success or non-zero to indicate
+ * some sort of error.
+ * 'breakinfo' is a 32bit wide bitset described in detail below.  Note
+ * that only bits 1..12 are used.
+ */
+
+/* 'breakinfo':- */
+/* Can trap on address equality. */
+#define ADP_Info_Points_Comparison      (1 << 0)
+
+/* Can trap on address range. */
+#define ADP_Info_Points_Range           (1 << 1)
+
+/* Can trap on 8bit memory reads. */
+#define ADP_Info_Points_ReadByteWatch   (1 << 2)
+
+/* Can trap on 16bit memory reads. */
+#define ADP_Info_Points_ReadHalfWatch   (1 << 3)
+
+/* Can trap on 32bit memory reads. */
+#define ADP_Info_Points_ReadWordWatch   (1 << 4)
+
+/* Can trap on 8bit write accesses. */
+#define ADP_Info_Points_WriteByteWatch  (1 << 5)
+
+/* Can trap on 16bit write accesses. */
+#define ADP_Info_Points_WriteHalfWatch  (1 << 6)
+
+/* Can trap on 32bit write accesses. */
+#define ADP_Info_Points_WriteWordWatch  (1 << 7)
+
+/* Like range, but based on address bitmask<. */
+#define ADP_Info_Points_Mask            (1 << 8)
+
+/* Multi-threaded support only - thread specific breakpoints. */
+#define ADP_Info_Points_ThreadBreak     (1 << 9)
+
+/* Multi-threaded support only - thread specific watchpoints. */
+#define ADP_Info_Points_ThreadWatch     (1 << 10)
+
+/* Allows conditional breakpoints. */
+#define ADP_Info_Points_Conditionals    (1 << 11)
+
+/* Break- and watch-points can be interrogated */
+#define ADP_Info_Points_Status          (1 << 12)
+
+
+#define ADP_Info_Step                   ADPSUBREASON(CI_HADP,3)
+/* ADP_Info_Step
+ * -------------
+ * Summary: Returns a 32bit wide bitmask of the single-stepping
+ * capabilities of the target debug agent.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word stepinfo)
+ *
+ * 'status' returns RDIError_NoError on success, or non-zero to indicate
+ * some kind of error.
+ * 'stepinfo' is a 32bit wide bitmask described in detail below.  Note that
+ * only 3 bits are used.
+ */
+
+/* 'stepinfo':- */
+/* Single-stepping of more than one instruction is possible. */
+#define ADP_Info_Step_Multiple  (1 << 0)
+
+/* Single-stepping until next direct PC change is possible. */
+#define ADP_Info_Step_PCChange  (1 << 1)
+
+/* Single-stepping of a single instruction is possible. */
+#define ADP_Info_Step_Single    (1 << 2)
+
+
+#define ADP_Info_MMU                    ADPSUBREASON(CI_HADP,4)
+/* ADP_Info_MMU
+ * ------------
+ * Summary: Returns information about the memory management system (if
+ * any).
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word meminfo)
+ *
+ * 'status' returns RDIError_NoError to indicate success or non-zero to
+ * indicate some kind of error.
+ * 'meminfo' should be a 32bit unique ID, or zero if there is no MMU
+ * support on the target.
+ */
+
+
+#define ADP_Info_SemiHosting            ADPSUBREASON(CI_HADP,5)
+/* ADP_Info_SemiHosting
+ * --------------------
+ * Summary: This message is used to check whether semi-hosting info calls
+ * are available on the target.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' returns RDIError_NoError if semi-hosting info calls are available,
+ * non-zero otherwise.
+ */
+
+
+#define ADP_Info_CoPro                  ADPSUBREASON(CI_HADP,6)
+/* ADP_Info_CoPro
+ * --------------
+ * Summary: This message checks whether CoProcessor info calls are
+ * supported.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' returns RDIError_NoError to indicate these facilities
+ * are supported, non-zero otherwise.
+ */
+
+
+#define ADP_Info_Cycles                 ADPSUBREASON(CI_HADP,7)
+/* ADP_Info_Cycles
+ * ---------------
+ * Summary: Returns the number of instructions and cycles executed since
+ * the target was initialised.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word ninstr, word Scycles, word Ncycles,
+ *          word Icycles, word Ccycles, word Fcycles)
+ *
+ * 'status' is RDIError_NoError to indicate success, or non-zero if there
+ * is no target support for gathering cycle count information.
+ * 'ninstr' is the number of instructions executed.
+ * 'Scycles' is the number of S-cycles executed.
+ * 'Ncycles' is the number of N-cycles executed.
+ * 'Icycles' is the number of I-cycles executed.
+ * 'Ccycles' is the number of C-cycles executed.
+ * 'Fcycles' is the number of F-cycles executed.
+ */
+
+
+#define ADP_Info_DescribeCoPro          ADPSUBREASON(CI_HADP,8)
+/* ADP_Info_DescribeCoPro
+ * ----------------------
+ * Summary: Describe the registers of a coprocessor.  Use only if
+ * ADP_Info_CoPro return RDIError_NoError.
+ *
+ * Arguments:
+ * Send:   Arguments of the form:
+ *         (byte cpno, byte rmin, byte rmax, byte nbytes, byte access,
+ *          byte cprt_r_b0, byte cprt_r_b1, byte cprt_w_b0, byte cprt_w_b1)
+ *         And a terminating byte = 0xff.  Must be within maximum buffer size.
+ * Return: (word status)
+ *
+ * 'cpno' is the number of the coprocessor to be described.
+ * 'rmin' is the bottom of a range of registers with the same description.
+ * 'rmax' is the top of a range of registers with the same description.
+ * 'nbytes' is the size of the register.
+ * 'access' describes access to the register and is described in more detail
+ * below.
+ *
+ * If bit 2 of access is set:-
+ * 'cprt_r0' provides bits 0 to 7, and
+ * 'cprt_r1' provides bits 16 to 23 of a CPRT instruction to read the
+ * register.
+ * 'cprt_w0' provides bits 0 to 7, and
+ * 'cprt_w1' provides bits 16 to 23 of a CPRT instruction to write the
+ * register.
+ *
+ * Otherwise, 'cprt_r0' provides bits 12 to 15, and 'cprt_r1' bit 22 of CPDT
+ * instructions to read and write the register ('cprt_w0' and 'cprt_w1' are
+ * junk).
+ */
+
+/* 'access':- */
+/* Readable. */
+#define ADP_Info_DescribeCoPro_Readable   (1 << 0)
+
+/* Writeable. */
+#define ADP_Info_DescribeCoPro_Writeable  (1 << 1)
+
+/* Registers read or written via CPDT instructions (else CPRT) with this
+   bit set. */
+#define ADP_Info_DescribeCoPro_CPDT       (1 << 2)
+
+#define ADP_Info_RequestCoProDesc       ADPSUBREASON(CI_HADP,9)
+/* ADP_Info_RequestCoProDesc
+ * -------------------------
+ * Summary: Requests a description of the registers of a coprocessor.  Use
+ * only if ADP_Info_CoPro return RDIError_NoError.
+ *
+ * Arguments:
+ * Send:   (byte cpno)
+ * Return: Arguments of the form:-
+ *         (word status, byte rmin, byte rmax, byte nbytes, byte access)
+ *         Followed by a terminating byte = 0xFF.  Must be within maximum
+ *         buffer size.
+ * 'cpno' is the number of the coprocessor to describe.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'rmin' is the bottom of a range of registers with the same description.
+ * 'rmax' is the top of a range of registers with the same description.
+ * 'nbytes' is the size in bytes of the register(s).
+ * 'access' is as above in ADP_Info_DescribeCoPro.
+ */
+
+
+#define ADP_Info_AngelBufferSize        ADPSUBREASON(CI_HADP,10)
+/* ADP_Info_AngelBufferSize
+ * ------------------------
+ * Summary: Returns the Angel buffer sizes.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word defaultsize, word maxsize)
+ *
+ * 'status' returns RDIError_NoError to indicate success or non-zero to
+ * indicate some kind of error.
+ * 'defaultsize' is the default Angel ADP buffer size in bytes. This is
+ * at least 256 bytes.
+ * 'maxsize' is the largest Angel ADP buffer size in bytes. This will be
+ * greater than or equal to defaultsize.  The target will accept ADP messages
+ * of up to this length for download, etc.
+ *
+ * Was DownLoadSize in RDP/RDI world.  This is the amount that the target
+ * should transmit in a single operation.  This should now be the Angel
+ * buffer size.  This information is also given in the ADP_Booted message.
+ *
+ * NOTE: The value returned should be the DATASIZE and *NOT* BUFFERDEFSIZE.
+ * This is needed to ensure that the transport protocol information
+ * can be wrapped around the data.
+ */
+
+#define ADP_Info_ChangeableSHSWI        ADPSUBREASON(CI_HADP,11)
+/* ADP_Info_ChangeableSHSWI
+ * ------------------------
+ * Summary: This message is used to check whether it is possible to change
+ * which SWI's are used for semihosting.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' returns RDIError_NoError if semi-hosting info calls are available,
+ * non-zero otherwise.
+ */
+
+#define ADP_Info_CanTargetExecute      ADPSUBREASON(CI_HADP,12)
+/* ADP_Info_CanTargetExecute
+ * -------------------------
+ * Summary: This message is used to see if the target is currently in
+ * an executable state.  Typically this is called after the debugger
+ * initialises.  If a non-error statis is returned then the user is
+ * allowed to 'go' immediately.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' returns RDIError_NoError if target is ready to execute.
+ * other values indicate why it cannot execute.
+ */
+
+#define ADP_Info_AgentEndianess     ADPSUBREASON(CI_HADP,13)
+/* ADP_Info_AgentEndianess
+ * -------------------------
+ * Summary: This message is used to determine the endianess of the
+ * debug agent
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * status should be RDIError_LittleEndian or RDIError_BigEndian
+ * any other value indicates the target does not support this
+ * request, so the debugger will have to make a best guess, which
+ * probably means only allow little endian loadagenting.
+ */
+
+
+#define ADP_Control             ADPREASON(CI_HADP,2)
+/* This message allows for the state of the debug agent to be
+ * manipulated by the host.
+ */
+
+/* The following are sub reason codes to ADP control, the first parameter
+ * is the sub reason code which defines the format of subsequent parameters.
+ *
+ * word         sub reason code
+ */
+
+#define ADP_Ctrl_NOP                    ADPSUBREASON(CI_HADP,0)
+/* ADP_Ctrl_NOP
+ * ------------
+ * Summary: This message is used to check that ADP_Ctrl messages are
+ * supported.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate ADP_Ctrl messages are
+ * supported, non-zero otherwise.
+ */
+
+#define ADP_Ctrl_VectorCatch            ADPSUBREASON(CI_HADP,1)
+/* ADP_Ctrl_VectorCatch
+ * --------------------
+ * Summary: Specifies which hardware exceptions should be reported to the
+ * debugger.
+ *
+ * Arguments:
+ * Send:   (word bitmap)
+ * Return: (word status)
+ *
+ * 'bitmap' is a bit-mask of exceptions to be reported, described in more
+ * detail below.  A set bit indicates that the exception should be
+ * reported to the debugger, a clear bit indicates that the corresponding
+ * exception vector should be taken.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+/* 'bitmap':- */
+/* Reset(branch through zero). */
+#define ADP_Ctrl_VectorCatch_BranchThroughZero      (1 << 0)
+
+/* Undefined Instruction. */
+#define ADP_Ctrl_VectorCatch_UndefinedInstr         (1 << 1)
+
+/* Software Interrupt. */
+#define ADP_Ctrl_VectorCatch_SWI                    (1 << 2)
+
+/* Prefetch Abort. */
+#define ADP_Ctrl_VectorCatch_PrefetchAbort          (1 << 3)
+
+/* Data Abort. */
+#define ADP_Ctrl_VectorCatch_DataAbort              (1 << 4)
+
+/* Address Exception. */
+#define ADP_Ctrl_VectorCatch_AddressException       (1 << 5)
+
+/* Interrupt Request. */
+#define ADP_Ctrl_VectorCatch_IRQ                    (1 << 6)
+
+/* Fast Interrupt Request. */
+#define ADP_Ctrl_VectorCatch_FIQ                    (1 << 7)
+
+/* Error. */
+#define ADP_Ctrl_VectorCatch_Error                  (1 << 8)
+
+
+#define ADP_Ctrl_PointStatus_Watch      ADPSUBREASON(CI_HADP,2)
+/* ADP_Ctrl_PointStatus_Watch
+ * --------------------------
+ * Summary: Returns the hardware resource number and the type of that
+ * resource when given a watchpoint handle.  Should only be called if
+ * the value returned by ADP_Info_Points had ADP_Info_Points_Status set.
+ *
+ * Arguments:
+ * Send:   (word handle)
+ * Return: (word status, word hwresource, word type)
+ *
+ * 'handle' is a handle to a watchpoint.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'hwresource' is the hardware resource number. !!!!!
+ * 'type' is the type of the resource.
+ */
+
+
+#define ADP_Ctrl_PointStatus_Break      ADPSUBREASON(CI_HADP,3)
+/* ADP_Ctrl_PointStatus_Break
+ * --------------------------
+ * Summary: Returns the hardware resource number and the type of that
+ * resource when given a breakpoint handle.  Should only be called if
+ * the value returned by ADP_Info_Points had ADP_Info_Points_Status set.
+ *
+ * Arguments:
+ * Send:   (word handle)
+ * Return: (word status, word hwresource, word type)
+ *
+ * 'handle' is a handle to a breakpoint.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'hwresource' is the hardware resource number.
+ * 'type' is the type of the resource.
+ */
+
+#define ADP_Ctrl_SemiHosting_SetState   ADPSUBREASON(CI_HADP,4)
+/* ADP_Ctrl_SemiHosting_SetState
+ * -----------------------------
+ * Summary: Sets whether or not semi-hosting is enabled.
+ *
+ * Arguments:
+ * Send:   (word semihostingstate)
+ * Return: (word status)
+ *
+ * 'semihostingstate' sets semi-hosting to enabled if zero, otherwise
+ * it disables semi-hosting.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_SemiHosting_GetState   ADPSUBREASON(CI_HADP,5)
+/* ADP_Ctrl_SemiHosting_GetState
+ * -----------------------------
+ * Summary: Reads whether or not semi-hosting is enabled.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word semihostingstate)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'semihostingstate' is zero if semi-hosting is enabled, non-zero otherwise.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_SemiHosting_SetVector  ADPSUBREASON(CI_HADP,6)
+/* ADP_Ctrl_SemiHosting_SetVector
+ * ------------------------------
+ * Summary: Sets the semi-hosting vector.
+ *
+ * Arguments:
+ * Send:   (word semihostingvector)
+ * Return: (word status)
+ *
+ * 'semihostingvector' holds the value the vector is to be set to.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_SemiHosting_GetVector  ADPSUBREASON(CI_HADP,7)
+/* ADP_Ctrl_SemiHosting_GetVector
+ * ------------------------------
+ * Summary: Gets the value of the semi-hosting vector.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word semihostingvector)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'semihostingvector' holds the value of the vector.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_Log                    ADPSUBREASON(CI_HADP,8)
+/* ADP_Ctrl_Log
+ * ------------
+ * Summary: Returns the logging state.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word logsetting)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'logsetting' is a bitmap specifying the level of logging desired,
+ *  described in more detail below.  The bits can be ORed together
+ */
+
+/* 'logsetting':- */
+
+/* No logging. */
+#define ADP_Ctrl_Log_NoLogging    (0)
+/* RDI level logging. */
+#define ADP_Ctrl_Log_RDI          (1 << 0)
+/* ADP byte level logging. */
+#define ADP_Ctrl_Log_ADP          (1 << 1)
+
+
+#define ADP_Ctrl_SetLog                 ADPSUBREASON(CI_HADP,9)
+/* ADP_Ctrl_SetLog
+ * ---------------
+ * Summary: Sets the logging state.
+ *
+ * Arguments:
+ * Send:   (word logsetting)
+ * Return: (word status)
+ *
+ * 'logsetting' is the same as in ADP_Ctrl_Log above.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+#define ADP_Ctrl_SemiHosting_SetARMSWI   ADPSUBREASON(CI_HADP,10)
+/* ADP_Ctrl_SemiHosting_SetARMSWI
+ * ------------------------------
+ * Summary: Sets the number of the ARM SWI used for semihosting
+ *
+ * Arguments:
+ * Send:   (word ARM_SWI_number)
+ * Return: (word status)
+ *
+ * The debug agent will interpret ARM SWI's with the SWI number specified
+ * as semihosting SWI's.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: This should only be called if ADP_Info_ChangeableSHSWI didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_SemiHosting_GetARMSWI   ADPSUBREASON(CI_HADP,11)
+/* ADP_Ctrl_SemiHosting_GetARMSWI
+ * ------------------------------
+ * Summary: Reads the number of the ARM SWI used for semihosting
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word ARM_SWI_number)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * ARM_SWI_number is the SWI number which is used for semihosting.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+#define ADP_Ctrl_SemiHosting_SetThumbSWI   ADPSUBREASON(CI_HADP,12)
+/* ADP_Ctrl_SemiHosting_SetThumbSWI
+ * --------------------------------
+ * Summary: Sets the number of the Thumb SWI used for semihosting
+ *
+ * Arguments:
+ * Send:   (word Thumb_SWI_number)
+ * Return: (word status)
+ *
+ * The debug agent will interpret Thumb SWI's with the SWI number specified
+ * as semihosting SWI's.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: This should only be called if ADP_Info_ChangeableSHSWI didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_SemiHosting_GetThumbSWI   ADPSUBREASON(CI_HADP,13)
+/* ADP_Ctrl_SemiHosting_GetThumbSWI
+ * --------------------------------
+ * Summary: Reads the number of the Thumb SWI used for semihosting
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word ARM_Thumb_number)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * Thumb_SWI_number is the SWI number which is used for semihosting.
+ *
+ * NOTE: This should only be called if ADP_Info_SemiHosting didn't return
+ * an error.
+ */
+
+
+#define ADP_Ctrl_Download_Supported   ADPSUBREASON(CI_HADP,14)
+/* ADP_Ctrl_Download_Supported
+ * ---------------------------
+ * Summary: Can configuration be downloaded?
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError if the configuration can be downloaded,
+ * non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIInfo_DownLoad.
+ */
+
+
+#define ADP_Ctrl_Download_Data       ADPSUBREASON(CI_HADP,15)
+/* ADP_Ctrl_Download_Data
+ * ----------------------
+ * Summary: Loads configuration data.
+ *
+ * Arguments:
+ * Send:   (word nbytes, words data)
+ * Return: (word status)
+ *
+ * 'nbytes' is the number of *bytes* being sent.
+ * 'data' is the configuration data. NOTE: data must not cause the buffer
+ * size to exceed the maximum allowed buffer size.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDP_LoadConfigData.  Should only be used if
+ * ADP_ICEM_AddConfig didn't return an error.
+ */
+
+
+#define ADP_Ctrl_Download_Agent            ADPSUBREASON(CI_HADP,16)
+/* ADP_Ctrl_Download_Agent
+ * -----------------------
+ * Summary: Prepares Debug Agent to receive configuration data which it
+ * should interpret as a new version of the Debug Agent code.
+ *
+ * Arguments:
+ * Send:   (word loadaddress, word size)
+ * Return: (word status)
+ *
+ * 'loadaddress' is the address where the new Debug Agent code should be
+ * loaded.
+ * 'size' is the number of bytes of Debug Agent code to be loaded.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDP_LoadAgent.  The data will be downloaded using
+ * ADP_Ctrl_Download_Data.  The new agent is started with ADP_Ctrl_Start_Agent
+ */
+
+
+#define ADP_Ctrl_Start_Agent                    ADPSUBREASON(CI_HADP,17)
+/* ADP_Ctrl_Start_Agent
+ * -----------------------
+ * Summary: Instruct Debug Agent to begin execution of new agent,
+ * which has been downloaded by ADP_Ctrl_Download_Agent.
+ *
+ * Arguments:
+ * Send:   (word startaddress)
+ * Return: (word status)
+ *
+ * 'startaddress' is the address where the new Debug Agent code should be
+ *  entered, and must satisfy:
+ *     (loadaddress <= startaddress <= (loadaddress + size))
+ *  where 'loadaddress' and  'size' were specified in the
+ *  ADP_Ctrl_Download_Agent message.
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+
+#define ADP_Ctrl_SetTopMem                      ADPSUBREASON(CI_HADP,18)
+/* ADP_Ctrl_SetTopMem
+ * ------------------
+ * Summary: Sets the top of memory for ICEman2 systems, so that the C Library
+ * can allocate the stack in the correct place on startup.
+ *
+ * Arguments:
+ * Send:   (word mem_top)
+ * Return: (word status)
+ *
+ * This request should only be supported by ICEman2.  Standard Angel systems
+ * should return an error (unrecognised is fine).
+ */
+
+
+#define ADP_Read                ADPREASON(CI_HADP,3)
+#define ADP_ReadHeaderSize      (ADP_DEFAULT_HEADER_SIZE + 2*sizeof(word))
+
+/* ADP_Read
+ * --------
+ * Summary: Request for a transer of memory contents from the target to the
+ * debugger.
+ *
+ * Arguments:
+ * Send:   (word address, word nbytes)
+ * Return: (word status, word rnbytes [, bytes data])
+ *
+ * 'address' is the address from which memory transer should start.
+ * 'nbytes' is the number of bytes to transfer.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'rnbytes' holds the number of requested bytes NOT read (i.e. zero
+ * indicates success, non-zero indicates an error).
+ * 'data' is the number of bytes requested minus 'rnbytes'.
+ */
+
+
+
+#define ADP_Write               ADPREASON(CI_HADP,4)
+#define ADP_WriteHeaderSize     (ADP_DEFAULT_HEADER_SIZE + 2*sizeof(word))
+
+/* ADP_Write
+ * ---------
+ * Summary: Request for a transfer of memory contents from the debugger to
+ * the target.
+ *
+ * Arguments:
+ * Send:   (word address, word nbytes, bytes data)
+ * Return: (word status [, word rnbytes])
+ *
+ * 'address' is the address from which memory transer should start.
+ * 'nbytes' is the number of bytes to transfer.
+ * 'data' holds the bytes to be transferred.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'rnbytes' holds the number of requested bytes NOT written (i.e. zero
+ * indicates success, non-zero indicates an error) if status indicated an
+ * error.
+ */
+
+
+
+#define ADP_CPUread             ADPREASON(CI_HADP,5)
+/* ADP_CPUread
+ * -----------
+ * Summary: This is a request to read values in the CPU.
+ *
+ * Arguments:
+ * Send:   (byte mode, word mask)
+ * Return: (word status, words data)
+ *
+ * 'mode' defines the processor mode from which the transfer should be made.
+ * It is described in more detail below.
+ * 'mask' indicates which registers should be transferred. Setting a bit to
+ * one will cause the designated register to be transferred. The details
+ * of mask are specified below.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'data' holds the values of the registers on successful completion,
+ * otherwise it just holds rubbish.  The lowest numbered register is
+ * transferred first.  NOTE: data must not cause the buffer size to exceed
+ * the maximum allowed buffer size.
+ */
+
+/* 'mode':- */
+/* The mode number is the same as the mode number used by an ARM; a value of
+   255 indicates the current mode. */
+#define ADP_CPUmode_Current     (255)
+
+/* 26bit user mode. */
+#define ADP_CPUread_26bitUser   (0x0)
+
+/* 26bit FIQ mode. */
+#define ADP_CPUread_26bitFIQ    (0x1)
+
+/* 26bit IRQ mode. */
+#define ADP_CPUread_26bitIRQ    (0x2)
+
+/* 26bit Supervisor mode. */
+#define ADP_CPUread_26bitSVC    (0x3)
+
+/* 32bit user mode. */
+#define ADP_CPUread_32bitUser   (0x10)
+
+/* 32bit FIQ mode. */
+#define ADP_CPUread_32bitFIQ    (0x11)
+
+/* 32bit IRQ mode. */
+#define ADP_CPUread_32bitIRQ    (0x12)
+
+/* 32bit Supervisor mode. */
+#define ADP_CPUread_32bitSVC    (0x13)
+
+/* 32bit Abort mode. */
+#define ADP_CPUread_32bitAbort  (0x17)
+
+/* 32bit Undefined mode. */
+#define ADP_CPUread_32bitUndef  (0x1B)
+
+/* #32bit System mode - Added in Architecture 4 ARMs e.g.ARM7TDMI */
+#define ADP_CPUread_32bitSystem (0x1F)
+
+/* 'mask':- */
+/* Request registers RO-R14. */
+#define ADP_CPUread_RegsMask  (0x7FFF)
+
+/* Request Program Counter (including mode and flag bits in 26-bit modes. */
+#define ADP_CPUread_PCmode    (1 << 15)
+
+/* Request Program Counter (without mode and flag bits in 26-bit modes. */
+#define ADP_CPUread_PCnomode  (1 << 16)
+
+/* Requests the transfer of the CPSR */
+#define ADP_CPUread_CPSR      (1 << 17)
+
+/* In processor modes with an SPSR(non-user modes), bit 19 requests its
+   transfer */
+#define ADP_CPUread_SPSR      (1 << 18)
+
+
+
+#define ADP_CPUwrite            ADPREASON(CI_HADP,6)
+/* ADP_CPUwrite
+ * ------------
+ * Summary: This is a request to write values to the CPU.
+ *
+ * Arguments:
+ * Send:   (byte mode, word mask, words data)
+ * Return: (word status)
+ *
+ * 'mode' defines the processor mode to which the transfer should be made.
+ * The mode number is the same as the mode number used by ARM; a value of
+ * 255 indicates the current mode. See ADP_CPUread above for more detail.
+ * 'mask' indicates which registers should be transferred. Setting a bit to
+ * one will cause the designated register to be transferred. The details
+ * of mask are specified above in ADP_CPUread.
+ * 'data' holds the values of the registers to be transferred.  The first
+ * value is written to the lowest numbered register.  NOTE: data must not
+ * cause the buffer size to exceed the maximum allowed buffer size.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+
+
+#define ADP_CPread              ADPREASON(CI_HADP,7)
+/* ADP_CPread
+ * ----------
+ * Summary: This message requests a co-processors internal state.
+ *
+ * Arguments:
+ * Send:   (byte CPnum, word mask)
+ * Return: (word status, words data)
+ *
+ * 'CPnum' is the number of the co-processor to transfer values from.
+ * 'mask' specifies which registers to transfer and is co-processor
+ * specific.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'data' holds the registers specified in 'mask' if successful, otherwise
+ * just rubbish.  The lowest numbered register is transferred first.
+ * NOTE: data must not cause the buffer size to exceed the maximum allowed
+ * buffer size.
+ */
+
+
+
+#define ADP_CPwrite             ADPREASON(CI_HADP,8)
+/* ADP_CPwrite
+ * -----------
+ * Summary: This message requests a write to a co-processors internal state.
+ *
+ * Arguments:
+ * Send:   (byte CPnum, word mask, words data)
+ * Return: (word status)
+ *
+ * 'CPnum' is the number of the co-processor to transfer values to.
+ * 'mask' specifies which registers to transfer and is co-processor
+ * specific.
+ * 'data' holds the values to transfer to the registers specified in 'mask'.
+ * The first value is written to the lowest numbered register.
+ * NOTE: data must not cause the buffer size to exceed the maximum allowed
+ * buffer size.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+
+
+#define ADP_SetBreak            ADPREASON(CI_HADP,9)
+/* ADP_SetBreak
+ * ------------
+ * Summary: Sets a breakpoint.
+ *
+ * Arguments:
+ * Send:   (word address, byte type [, word bound])
+ * Return: (word status, word pointhandle, word raddress, word rbound)
+ *
+ * 'address' is the address of the instruction to set the breakpoint on.
+ * 'type' specifies the sort of breakpoint and is described in more detail
+ * below.
+ * 'bound' is included if the least significant 4 bits of type are set to
+ * 5 or above (see below for more detail).
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'pointhandle'  returns a handle to the breakpoint, it will be valid if bit
+ * 7 of 'type' is set.  See below for more detail.
+ * 'raddress' is valid depending on 'type', see below for more detail.
+ * 'rbound' is valid depending on 'type', see below for more detail.
+ */
+
+/* 'type':- */
+/* The least significant 4 bits define the sort of breakpoint to set:- */
+/* Halt if the pc is equal to 'address'. */
+#define ADP_SetBreak_EqualsAddress         (0)
+
+/* Halt if the pc is greater than 'address'. */
+#define ADP_SetBreak_GreaterAddress        (1)
+
+/* Halt if the pc is greater than or equal to 'address'. */
+#define ADP_SetBreak_GEqualsAddress        (2)
+
+/* Halt if the pc is less than 'address'. */
+#define ADP_SetBreak_LessAddress           (3)
+
+/* Halt if the pc is less than or equal to 'address'. */
+#define ADP_SetBreak_LEqualsAddress        (4)
+
+/* Halt if the pc is in the range from 'address' to 'bound' inclusive. */
+#define ADP_SetBreak_Range                 (5)
+
+/* Halt if the pc is not in the range from 'address' to 'bound' inclusive. */
+#define ADP_SetBreak_NotRange              (6)
+
+/* Halt if (pc & 'bound') = 'address'. */
+#define ADP_SetBreak_AndBound              (7)
+
+/* Bits 5,6 and 7 are used as follows :- */
+/* If set this indicates that the breakpoint is on a 16bit (Thumb)
+   instruction rather than a 32bit (ARM) instruction. */
+#define ADP_SetBreak_Thumb                 (1 << 4)
+
+/* This requests that the breakpoint should be conditional (execution halts
+   only if the breakpointed instruction is executed, not if it is
+   conditionally skipped).  If bit 5 is not set, execution halts whenever
+   the breakpointed instruction is reached (whether executed or skipped). */
+#define ADP_SetBreak_Cond                  (1 << 5)
+
+/* This requests a dry run: the breakpoint is not set and the 'raddress', and
+   if appropriate the 'rbound', that would be used, are returned (for
+   comparison and range breakpoints the address and bound used need not be
+   exactly as requested).  A RDIError_NoError 'status' byte indicates that
+   resources are currently available to set the breakpoint, non-zero
+   indicates an error. RDIError_NoMorePoints indicates that the required
+   breakpoint resources are not currently available. */
+#define ADP_SetBreak_DryRun                (1 << 6)
+
+/* If the request is successful, but there are no more breakpoint registers
+   (of the requested type), then the value RDIError_NoMorePoints is
+   returned. */
+
+/* If a breakpoint is set on a location which already has a breakpoint, the
+   first breakpoint will be removed before the new breakpoint is set. */
+
+
+
+#define ADP_ClearBreak          ADPREASON(CI_HADP,10)
+/* ADP_ClearBreak
+ * --------------
+ * Summary: Clears a breakpoint.
+ *
+ * Arguments:
+ * Send:   (word pointhandle)
+ * Return: (word status)
+ *
+ * 'pointhandle' is a handle returned by a previous ADP_SetBreak.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+
+#define ADP_SetWatch            ADPREASON(CI_HADP,11)
+/* ADP_SetWatch
+ * ------------
+ * Summary: Sets a watchpoint.
+ *
+ * Arguments:
+ * Send:   (word address, byte type, byte datatype [,word bound])
+ * Return: (word status, word pointhandle, word raddress, word rbound)
+ *
+ * 'address' is the address at which to set the watchpoint.
+ * 'type' is the type of watchpoint to set and is described in detail below.
+ * 'datatype' defines the sort of data access to watch for and is described
+ * in more detail below.
+ * 'bound' is included depending on the value of type (see description of
+ * type below).
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'pointhandle' is valid depending on the value of type (see description
+ * of type below).
+ * 'raddress' is valid depending on the value of type (see description
+ * of type below).
+ * 'rbound' is valid depending on the value of type (see description
+ * of type below).
+ */
+
+/* 'type':- */
+/* The least significant 4 bits of 'type' define the sort of watchpoint to
+   set:- */
+/* Halt on a data access to the address equal to 'address'. */
+#define ADP_SetWatch_EqualsAddress          (0)
+
+/* Halt on a data access to an address greater than 'address'. */
+#define ADP_SetWatch_GreaterAddress         (1)
+
+/* Halt on a data access to an address greater than or equal to 'address'. */
+#define ADP_SetWatch_GEqualsAddress         (2)
+
+/* Halt on a data access to an address less than 'address'. */
+#define ADP_SetWatch_LessAddress            (3)
+
+/* Halt on a data access to an address less than or equal to 'address'. */
+#define ADP_SetWatch_LEqualsAddress         (4)
+
+/* Halt on a data access to an address in the range from 'address' to
+   'bound' inclusive. */
+#define ADP_SetWatch_Range                  (5)
+
+/* Halt on a data access to an address not in the range from 'address' to
+   'bound' inclusive. */
+#define ADP_SetWatch_NotRange               (6)
+
+/* Halt if (data-access-address & 'bound')='address'. */
+#define ADP_SetWatch_AndBound               (7)
+
+/* Bits 6 and 7 of 'type' also have further significance:-
+   NOTE: they must not be simulataneously set. */
+
+/* Bit 6 of 'type' set:  Requests a dry run: the watchpoint is not set and
+   the 'address' and, if appropriate, the 'bound', that would be used are
+   returned (for range and comparison watchpoints, the 'address' and 'bound'
+   used need not be exactly as requested).  A RDIError_NoError status byte
+   indicates that resources are currently available to set the watchpoint;
+   RDIError_NoMorePoints indicates that the required watchpoint resources
+   are not currently available. */
+
+/* Bit 7 of 'type' set:  Requests that a handle should be returned for the
+   watchpoint by which it will be identified subsequently.  If bit 7 is
+   set, a handle will be returned ('pointhandle'), whether or not the
+   request succeeds or fails (but, obviously, it will only be meaningful
+   if the request succeesd). */
+
+/* 'datatype':- */
+/* The 'datatype' argument defines the sort of data access to watch for,
+   values can be summed or ORed together to halt on any set of sorts of
+   memory access. */
+
+/* Watch for byte reads. */
+#define ADP_SetWatch_ByteReads           (1)
+
+/* Watch for half-word reads. */
+#define ADP_SetWatch_HalfWordReads       (2)
+
+/* Watch for word reads. */
+#define ADP_SetWatch_WordReads           (4)
+
+/* Watch for half-word reads. */
+#define ADP_SetWatch_ByteWrites          (8)
+
+/* Watch for half-word reads. */
+#define ADP_SetWatch_HalfWordWrites      (16)
+
+/* Watch for half-word reads. */
+#define ADP_SetWatch_WordWrites          (32)
+
+/* On successful completion a RDIError_NoError 'status' byte is returned.  On
+   unsuccessful completion, a non-zero error code byte is returned.  If the
+   request is successful, but there are now no more watchpoint registers
+   (of the requested type), then the value RDIError_NoMorePoints is
+   returned. */
+
+/* If a watchpoint is set on a location which already has a watchpoint, the
+   first watchpoint will be removed before the new watchpoint is set. */
+
+
+#define ADP_ClearWatch          ADPREASON(CI_HADP,12)
+/* ADP_ClearWatch
+ * --------------
+ * Summary: Clears a watchpoint.
+ *
+ * Arguments:
+ * Send:   (word pointhandle)
+ * Return: (word status)
+ *
+ * 'pointhandle' is a handle to a watchpoint returned by a previous
+ * ADP_SetWatch.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+
+
+#define ADP_Execute             ADPREASON(CI_HADP,13)
+/* ADP_Execute
+ * -----------
+ * Summary: This message requests that the target starts executing from
+ * the stored CPU state.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * The message will *ALWAYS* respond immediately with an ACK (unlike the
+ * old RDI definition, which allowed asynchronous message replies).
+ *
+ * Execution will stop when allowed system events occur. The host will
+ * be notified via a ADP_Stopped message (described below).
+ */
+
+
+
+#define ADP_Step                ADPREASON(CI_HADP,14)
+/* ADP_Step
+ * --------
+ * Summary: Execute 'ninstr' instructions.
+ *
+ * Arguments:
+ * Send: (word ninstr)
+ * Return: (word status)
+ *
+ * 'ninstr' is the number of instructions to execute, starting at the
+ * address currently loaded into the CPU program counter.  If it is zero,
+ * the target should execute instructions upto the next instruction that
+ * explicitly alters the Program Counter. i.e. a branch or ALU operation
+ * with the PC as the destination.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * The ADP_Step function (unlike the earlier RDI system) will *ALWAYS*
+ * return an ACK immediately. A subsequent ADP_Stopped message will be
+ * delivered from the target to the host when the ADP_Step operation
+ * has completed.
+ */
+
+
+
+#define ADP_InterruptRequest    ADPREASON(CI_HADP,15)
+/* ADP_InterruptRequest
+ * --------------------
+ * Summary: Interrupt execution.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * On receiving this message the target should attempt to stop execution.
+ */
+
+
+
+#define ADP_HW_Emulation             ADPREASON(CI_HADP,16)
+/* ADP_HW_Emulation
+ * ----------------
+ * The first parameter to ADP_HW_Emulation is a Reason Subcode, and
+ * subsequent parameters are defined by that subcode
+ *
+ * word         reason subcode
+ * other arguments as reason subcode determines
+ *
+ */
+
+/* ADP__HW_Emulation sub-reason codes: */
+
+#define ADP_HW_Emul_Supported         ADPSUBREASON(CI_HADP,0)
+/* ADP_HW_Emul_Supported
+ * ---------------------
+ * Summary: Enquires whether calls to the next 4 messages are available
+ * (MemoryAccess, MemoryMap, Set_CPUspeed, ReadClock).
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate the messages are available,
+ * non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDI_Info_Memory_Stats.
+ */
+
+
+#define ADP_HW_Emul_MemoryAccess      ADPSUBREASON(CI_HADP,1)
+/* ADP_HW_Emul_MemoryAccess
+ * ------------------------
+ * Summary: Get memory access information for memory block with specified
+ * handle.
+ *
+ * Arguments:
+ * Send:   (word handle)
+ * Return: (word status, word nreads, word nwrites, word sreads,
+ *          word swrites, word ns, word s)
+ *
+ * 'handle' is a handle to a memory block.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'nreads' is the number of non-sequential reads.
+ * 'nwrites' is the number of non-sequential writes.
+ * 'sreads' is the number of sequential reads.
+ * 'swrites' is the number of sequential writes.
+ * 'ns' is time in nano seconds.
+ * 's' is time in seconds.
+ *
+ * NOTE: Equivalent to RDIMemory_Access.
+ */
+
+
+#define ADP_HW_Emul_MemoryMap         ADPSUBREASON(CI_HADP,2)
+/* ADP_HW_Emul_MemoryMap
+ * ---------------------
+ * Summary: Sets memory characteristics.
+ *
+ * Arguments:
+ * Send:   (word n,
+    Then 'n' sets of arguments of the form:-
+            word handle, word start, word limit, byte width,
+            byte access, word Nread_ns, word Nwrite_ns, word Sread_ns,
+            word Swrite_ns)
+ * Return: (word status)
+ *
+ * 'n' is the number of sets of arguments.
+ * 'handle' is a handle to the region.
+ * 'start' is the start of this region.
+ * 'limit' is the limit of this region.
+ * 'width' is the memory width, described in detail below.
+ * 'access' is described in detail below.
+ * 'Nread_ns' is the access time for N read cycles in nano seconds.
+ * 'Nwrite_ns' is the access time for N write cycles in nano seconds.
+ * 'Sread_ns' is the access time for S read cycles in nano seconds.
+ * 'Swrite_ns' is the access time for S write cycles in nano seconds.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * NOTE: Equivalent to RDIMemory_Map.
+ */
+
+/* 'width':- */
+/* 8 bit memory width. */
+#define ADP_HW_Emul_MemoryMap_Width8     (0)
+
+/* 16 bit memory width. */
+#define ADP_HW_Emul_MemoryMap_Width16    (1)
+
+/* 32 bit memory width. */
+#define ADP_HW_Emul_MemoryMap_Width32    (2)
+
+/* 'access':- */
+/* Bit 0 - read access. */
+#define ADP_HW_Emul_MemoryMap_Access_Read      (1 << 0)
+
+/* Bit 1 - write access. */
+#define ADP_HW_Emul_MemoryMap_Access_Write     (1 << 1)
+
+/* Bit 2 - latched 32 bit memory. */
+#define ADP_HW_Emul_MemoryMap_Access_Latched   (1 << 2)
+
+
+#define ADP_HW_Emul_SetCPUSpeed       ADPSUBREASON(CI_HADP,3)
+/* ADP_HW_Emul_SetCPUSpeed
+ * -----------------------
+ * Summary: Sets the speed of the CPU.
+ *
+ * Arguments:
+ * Send:   (word speed)
+ * Return: (word status)
+ *
+ * 'speed' is the CPU speed in nano seconds.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDISet_CPUSpeed.
+ */
+
+
+#define ADP_HW_Emul_ReadClock         ADPSUBREASON(CI_HADP,4)
+/* ADP_HW_Emul_ReadClock
+ * ---------------------
+ * Summary: Reads simulated time.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word ns, word s)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'ns' is time in nano seconds.
+ * 's' is time in seconds.
+ *
+ * NOTE: Equivalent to RDIRead_Clock.
+ */
+
+
+#define ADP_ICEbreakerHADP            ADPREASON(CI_HADP,17)
+
+/* The first parameter to ADP_ICEbreaker is a Reason Subcode, and
+ * subsequent parameters are defined by that subcode
+ *
+ * word         reason subcode
+ * other arguments as reason subcode determines
+ *
+ */
+
+/* ADP_ICEbreaker sub-reason codes: */
+
+#define ADP_ICEB_Exists               ADPSUBREASON(CI_HADP,0)
+/* ADP_ICEB_Exists
+ * ---------------
+ * Summary: Is there an ICEbreaker in the system?
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate there is an ICEbreaker,
+ * non-zero otherwise.
+ */
+
+
+#define ADP_ICEB_GetLocks             ADPSUBREASON(CI_HADP,1)
+/* ADP_ICEB_GetLocks
+ * -----------------
+ * Summary: Returns which ICEbreaker registers are locked.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word lockedstate)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'lockedstate' is a bitmap if the ICEbreaker registers locked against use
+ * by IceMan (because explicitly written by the user). Bit n represents
+ * hardware breakpoint n, and if set the register is locked.
+ *
+ * NOTE: Equivalent to RDIIcebreaker_GetLocks.  Should only be used if
+ * ADP_ICEB_Exists didn't return an error.
+ */
+
+
+#define ADP_ICEB_SetLocks             ADPSUBREASON(CI_HADP,2)
+/* ADP_ICEB_SetLocks
+ * -----------------
+ * Summary: Sets which ICEbreaker registers are locked.
+ *
+ * Arguments:
+ * Send:   (word lockedstate)
+ * Return: (word status)
+ *
+ * 'lockedstate' is the same as in ADP_ICEB_GetLocks above.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIIcebreaker_SetLocks.  Should only be used if
+ * ADP_ICEB_Exists didn't return an error.
+ */
+
+
+#define ADP_ICEB_CC_Exists            ADPSUBREASON(CI_HADP,3)
+/* ADP_ICEB_CC_Exists
+ * ------------------
+ * Summary: Is there an ICEbreaker Comms Channel?
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate there is a Comms Channel,
+ * non-zero otherwise.
+ *
+ * NOTE: Should only be used if ADP_ICEB_Exists didn't return an error.
+ */
+
+
+#define ADP_ICEB_CC_Connect_ToHost    ADPSUBREASON(CI_HADP,4)
+/* ADP_ICEB_CC_Connect_ToHost
+ * --------------------------
+ * Summary: Connect Comms Channel in ToHost direction.
+ *
+ * Arguments:
+ * Send:   (byte connect)
+ * Return: (word status)
+ *
+ * 'connect' !!!!!
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDICommsChannel_ToHost.  Should only be used if
+ * ADP_ICEB_CC_Exists didn't return an error.
+ */
+
+
+#define ADP_ICEB_CC_Connect_FromHost  ADPSUBREASON(CI_HADP,5)
+/* ADP_ICEB_CC_Connect_FromHost
+ * ----------------------------
+ * Summary: Connect Comms Channel in FromHost direction.
+ *
+ * Arguments:
+ * Send:   (byte connect)
+ * Return: (word status)
+ *
+ * 'connect' is the same as in ADP_ICEB_CC_Connect_ToHost above.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDICommsChannel_FromHost.  Should only be used if
+ * ADP_ICEB_CC_Exists didn't return an error.
+ */
+
+
+#define ADP_ICEman                    ADPREASON(CI_HADP,18)
+
+/* The first parameter to ADP_ICEman is a Reason Subcode, and
+ * subsequent parameters are defined by that subcode
+ *
+ * word         reason subcode
+ * other arguments as reason subcode determines
+ *
+ */
+
+/* ADP_ICEman sub-reason codes: */
+
+
+#define ADP_ICEM_AddConfig            ADPSUBREASON(CI_HADP,0)
+/* ADP_ICEM_AddConfig
+ * ------------------
+ * Summary: Prepares target to receive configuration data block.
+ *
+ * Arguments:
+ * Send:   (word nbytes)
+ * Return: (word status)
+ *
+ * 'nbytes' is the number of bytes in the configuration block.
+ * 'status' is RDIError_NoError to indicate success, non-zero if a
+ * configuration block of this size can't be accepted.
+ *
+ * NOTE: Equivalent to RDP_AddConfig.
+ */
+
+
+#define ADP_ICEM_SelectConfig         ADPSUBREASON(CI_HADP,1)
+/* ADP_ICEM_SelectConfig
+ * ---------------------
+ * Summary: Selects one of the sets of configuration data blocks and
+ * reinitialises to use the new configuration.
+ *
+ * Arguments:
+ * Send:   (byte aspect, byte namelen, byte matchtype, word vsn_req,
+            bytes name)
+ * Return: (word status, word vsn_sel)
+ *
+ * 'aspect' is one of two values defined below.
+ * 'namelen' is the number of bytes in 'name'.
+ * 'matchtype' specifies how the selected version must match that specified,
+ * and takes one of the values defined below.
+ * 'vsn_req' is the requested version of the named configuration.
+ * 'name' is the name of the configuration.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'vsn_sel' is the version number of the configuration selected on success.
+ *
+ * NOTE: Equivalent to RDP_SelectConfig.
+ */
+
+/* 'aspect':- */
+#define ADP_ICEM_SelectConfig_ConfigCPU       (0)
+#define ADP_ICEM_SelectConfig_ConfigSystem    (1)
+
+/* 'matchtype':- */
+#define ADP_ICEM_SelectConfig_MatchAny        (0)
+#define ADP_ICEM_SelectConfig_MatchExactly    (1)
+#define ADP_ICEM_SelectConfig_MatchNoEarlier  (2)
+
+
+#define ADP_ICEM_ConfigCount          ADPSUBREASON(CI_HADP,2)
+/* ADP_ICEM_ConfigCount
+ * --------------------
+ * Summary: Return number of configurations.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status [, word count])
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'count' returns the number of configurations if status is zero.
+ *
+ * NOTE: Equivalent to RDIConfig_Count.
+ */
+
+
+#define ADP_ICEM_ConfigNth            ADPSUBREASON(CI_HADP,3)
+/* ADP_ICEM_ConfigNth
+ * ------------------
+ * Summary: Gets the nth configuration details.
+ *
+ * Arguments:
+ * Send:   (word confign)
+ * Return: (word status, word version, byte namelen, bytes name)
+ *
+ * 'confign' is the number of the configuration.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'version' is the configuration version number.
+ * 'namelen' is the number of bytes in 'name'.
+ * 'name' is the name of the configuration.
+ *
+ * NOTE: Equivalent to RDIConfig_Nth.
+ */
+
+
+
+#define ADP_Profile                   ADPREASON(CI_HADP,19)
+
+/* The first parameter to ADP_Profile is a Reason Subcode, and
+ * subsequent parameters are defined by that subcode
+ *
+ * word         reason subcode
+ * other arguments as reason subcode determines
+ *
+ */
+
+/* ADP_Profile sub-reason codes: */
+
+
+#define ADP_Profile_Supported         ADPSUBREASON(CI_HADP,0)
+/* ADP_Profile_Supported
+ * ---------------------
+ * Summary: Checks whether profiling is supported.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError if profiling is supported, non-zero otherwise.
+ *
+ * NOTE: Can also be determined using Info_Target.
+ */
+
+
+#define ADP_Profile_Stop              ADPSUBREASON(CI_HADP,1)
+/* ADP_Profile_Stop
+ * ----------------
+ * Summary: Stops profiling.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIProfile_Stop.
+ */
+
+
+#define ADP_Profile_Start             ADPSUBREASON(CI_HADP,2)
+/* ADP_Profile_Start
+ * -----------------
+ * Summary: Starts profiling (PC sampling).
+ *
+ * Arguments:
+ * Send:   (word interval)
+ * Return: (word status)
+ *
+ * 'interval' is the period of PC sampling in micro seconds.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIProfile_Start.
+ */
+
+
+#define ADP_Profile_WriteMap          ADPSUBREASON(CI_HADP,3)
+#define ADP_ProfileWriteHeaderSize    (ADP_DEFAULT_HEADER_SIZE + 4*sizeof(word))
+
+/* ADP_Profile_WriteMap
+ * --------------------
+ * Summary: Downloads a map array, which describes the PC ranges for profiling.
+ *
+ * Arguments: A number of messages each of form:-
+ * Send:   (word len, word size, word offset, words map_data)
+ * Return: (word status)
+ *
+ * 'len' is the number of elements in the entire map array being downloaded.
+ * 'size' is the number of words being downloaded in this message, i.e. the
+ * length of 'map_data'.
+ * 'offset' is the offset into the entire map array which this message starts
+ * from, in words.
+ * 'map_data' consists of 'size' words of map data.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIProfile_WriteMap.
+ */
+
+
+#define ADP_Profile_ReadMap           ADPSUBREASON(CI_HADP,4)
+#define ADP_ProfileReadHeaderSize     (ADP_DEFAULT_HEADER_SIZE + 2*sizeof(word))
+
+/* ADP_Profile_ReadMap
+ * -------------------
+ * Summary: Uploads a set of profile counts which correspond to the current
+ * profile map.
+ *
+ * Arguments: A number of messages, each of the form:
+ * Send:   (word offset, word size)
+ * Return: (word status, words counts)
+ *
+ * 'offset' is the offset in the entire array of counts that this message
+ * starts from, in words.
+ * 'size' is the number of words uploaded in this message (in counts).
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'counts' is 'size' words of profile counts.
+ *
+ * NOTE: Equivalent to RDIProfile_ReadMap.
+ */
+
+
+#define ADP_Profile_ClearCounts       ADPSUBREASON(CI_HADP,5)
+/* ADP_Profile_ClearCounts
+ * -----------------------
+ * Summary: Requests that PC sample counts be set to zero.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDIProfile_ClearCounts.
+ */
+
+#define ADP_InitialiseApplication       ADPREASON(CI_HADP,20)
+/* ADP_InitialiseApplication
+ * -------------------------
+ * Summary: Requests that OS setup up the thread/task so that it can be
+ *          executed.
+ *
+ * Arguments:
+ * Send: ()
+ * Return: (word status)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+#define ADP_End                         ADPREASON(CI_HADP,21)
+/* ADP_End
+ * -------
+ * Summary: Sent by the host debugger to tell angel this debugging session
+ *          is is finished
+ * Arguments:
+ * Send: ()
+ * Return: (word status)
+ * status' is RDIError_NoError to indicate success, non-zero otherwise.
+ */
+
+/******************************************************************
+ *
+ * CI_TADP messages
+ *
+ */
+
+#define ADP_TADPUnrecognised        ADPREASON(CI_TADP,0)
+/* This message is unusual in that it is normally sent in reply to
+ * another message which is not understood.  This is an exception
+ * to the normal protocol which says that a reply must have the
+ * same base reason code as the original.  There is a single reply
+ * parameter which is the reason code which was not understood.
+ *
+ * As well as being a reply this message can also be sent and will
+ * return as if this message were unrecognised!
+ *
+ * Parameters:
+ *      none
+ *
+ * Reply:
+ *      word    reason code which was not recognised
+ */
+
+/*-------------------------------------------------------------------------*/
+
+#define ADP_Stopped             ADPREASON(CI_TADP,1)
+/* ADP_Stopped
+ * -----------
+ * Summary: This message is sent to the host when the application stops,
+ * either naturally or due to an exception.
+ *
+ * Parameters:
+ *      word    reason subcode
+ *      other arguments as reason subcode determines.
+ *      Unless stated otherwise (below) there will be none.
+ *
+ * Reply:
+ *      word status     unless reason subcode says otherwise
+ *
+ * This message is sent to the host when execution has stopped. This
+ * can be when the end of the application has been reached, or as the
+ * result of an exception. It can also be the return from an ADP_Step
+ * process, when the requested number of instructions have been
+ * executed., or a breakpoint or watchpoint has been hit etc.
+ */
+
+/* The first set of Stopped subreason codes are for the ARM hardware
+ * vectors. These events will be raised if the
+ * ADP_Control_Vector_Catch allows, or if the target application has
+ * not provided its own handlers.
+ */
+#define ADP_Stopped_BranchThroughZero    ADPSUBREASON(CI_TADP,0)
+#define ADP_Stopped_UndefinedInstr       ADPSUBREASON(CI_TADP,1)
+#define ADP_Stopped_SoftwareInterrupt    ADPSUBREASON(CI_TADP,2)
+#define ADP_Stopped_PrefetchAbort        ADPSUBREASON(CI_TADP,3)
+#define ADP_Stopped_DataAbort            ADPSUBREASON(CI_TADP,4)
+#define ADP_Stopped_AddressException     ADPSUBREASON(CI_TADP,5)
+#define ADP_Stopped_IRQ                  ADPSUBREASON(CI_TADP,6)
+#define ADP_Stopped_FIQ                  ADPSUBREASON(CI_TADP,7)
+
+/* We leave the rest of what would be the bits in the VectorCatch
+ * bitmask free for future expansion.
+ */
+
+/* The following are software reasons for execution stopping: */
+#define ADP_Stopped_BreakPoint         ADPSUBREASON(CI_TADP,32)
+/* Breakpoint was reached
+ *   extra send parameter: word handle - indicates which breakpoint
+ */
+
+#define ADP_Stopped_WatchPoint         ADPSUBREASON(CI_TADP,33)
+/* Watchpoint was triggered
+ *   extra send parameter: word handle - indicates which watchpoint
+ */
+
+#define ADP_Stopped_StepComplete       ADPSUBREASON(CI_TADP,34)
+/* End of ADP_Step request */
+
+#define ADP_Stopped_RunTimeErrorUnknown ADPSUBREASON(CI_TADP,35)
+/*
+ * non-specific fatal runtime support error
+ */
+
+#define ADP_Stopped_InternalError      ADPSUBREASON(CI_TADP,36)
+/*   extra send parameter: word error - indicates the nature of the error
+ *
+ * An Angel internal error has happened.  The error number should be
+ * displayed for the user to report to his software supplier.  Once
+ * this error has been received the internal state of Angel can no longer
+ * be trusted.
+ */
+
+#define ADP_Stopped_UserInterruption   ADPSUBREASON(CI_TADP,37)
+/* Host requested interruption */
+
+#define ADP_Stopped_ApplicationExit    ADPSUBREASON(CI_TADP,38)
+/*   extra send parameter: word exitcode
+ * This indicates that the application has exited via exit(), an exitcode
+ * of zero indiactes successful termination.
+ */
+
+#define ADP_Stopped_StackOverflow      ADPSUBREASON(CI_TADP, 39)
+/*
+ * Software stack overflow has occurred
+ */
+
+#define ADP_Stopped_DivisionByZero     ADPSUBREASON(CI_TADP, 40)
+/*
+ * Division by zero has occurred
+ */
+
+#define ADP_Stopped_OSSpecific         ADPSUBREASON(CI_TADP, 41)
+/*
+ * The OS has requested that execution stops.  The OS will know
+ * why this has happened.
+ */
+
+
+
+/******************************************************************
+ *
+ * CI_TTDCC messages (Target-initiated debug comms channel)
+ *
+ */
+
+#define ADP_TDCC_ToHost             ADPREASON(CI_TTDCC,0)
+/* ADP_TDCC_ToHost
+ * ------------------
+ * Summary: Send Data down Comms Channel in ToHost direction.
+ *
+ * Arguments:
+ * Send:   (word nbytes, words data)
+ * Return: (word status)
+ *
+ * 'nbytes' is number of BYTES to be transferred from the target to the
+ *  host via the Debug Comms channel.
+ * 'data' is (nbytes/sizeof(word)) WORDS of data to be transferred from
+ *  the target to the host via the Debug Comms channel.
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ *
+ * NOTE: Equivalent to RDP_CCToHost and RDP_CCToHostReply (just set the
+ * direction bit).
+ * NOTE II: Current implementations only support single word transfers
+ *          (nbytes = 4).
+ */
+
+
+#define ADP_TDCC_FromHost          ADPREASON(CI_TTDCC,1)
+/* ADP_TDCC_FromHost
+ * --------------------
+ * Summary: Send Data down Comms Channel in FromHost direction.
+ *
+ * Arguments:
+ * Send:   ()
+ * Return: (word status, word nbytes, words data)
+ *
+ * 'status' is RDIError_NoError to indicate success, non-zero otherwise.
+ * 'nbytes' is number of BYTES to be transferred from the host to the
+ *  target via the Debug Comms channel, or zero if the host has no data
+ *  to transfer.
+ * 'data' is (nbytes/sizeof(word)) WORDS of transferred data.
+ *
+ * NOTE: Equivalent to RDP_CCFromHost and RDP_CCFromHostReply (just set the
+ * direction bit).
+ * NOTE II: Current implementations only support single word transfers
+ *          (nbytes = 4).
+ */
+
+
+/*******************************************************************
+ *
+ * Error Codes
+ *
+ */
+
+#define RDIError_NoError                0
+
+#define RDIError_Reset                  1
+#define RDIError_UndefinedInstruction   2
+#define RDIError_SoftwareInterrupt      3
+#define RDIError_PrefetchAbort          4
+#define RDIError_DataAbort              5
+#define RDIError_AddressException       6
+#define RDIError_IRQ                    7
+#define RDIError_FIQ                    8
+#define RDIError_Error                  9
+#define RDIError_BranchThrough0         10
+
+#define RDIError_NotInitialised         128
+#define RDIError_UnableToInitialise     129
+#define RDIError_WrongByteSex           130
+#define RDIError_UnableToTerminate      131
+#define RDIError_BadInstruction         132
+#define RDIError_IllegalInstruction     133
+#define RDIError_BadCPUStateSetting     134
+#define RDIError_UnknownCoPro           135
+#define RDIError_UnknownCoProState      136
+#define RDIError_BadCoProState          137
+#define RDIError_BadPointType           138
+#define RDIError_UnimplementedType      139
+#define RDIError_BadPointSize           140
+#define RDIError_UnimplementedSize      141
+#define RDIError_NoMorePoints           142
+#define RDIError_BreakpointReached      143
+#define RDIError_WatchpointAccessed     144
+#define RDIError_NoSuchPoint            145
+#define RDIError_ProgramFinishedInStep  146
+#define RDIError_UserInterrupt          147
+#define RDIError_CantSetPoint           148
+#define RDIError_IncompatibleRDILevels  149
+
+#define RDIError_CantLoadConfig         150
+#define RDIError_BadConfigData          151
+#define RDIError_NoSuchConfig           152
+#define RDIError_BufferFull             153
+#define RDIError_OutOfStore             154
+#define RDIError_NotInDownload          155
+#define RDIError_PointInUse             156
+#define RDIError_BadImageFormat         157
+#define RDIError_TargetRunning          158
+#define RDIError_DeviceWouldNotOpen     159
+#define RDIError_NoSuchHandle           160
+#define RDIError_ConflictingPoint       161
+
+#define RDIError_LittleEndian           240
+#define RDIError_BigEndian              241
+#define RDIError_SoftInitialiseError    242
+
+#define RDIError_InsufficientPrivilege  253
+#define RDIError_UnimplementedMessage   254
+#define RDIError_UndefinedMessage       255
+
+
+#endif
+
+/* EOF adp_h */
diff --git a/gdb/rdi-share/adperr.h b/gdb/rdi-share/adperr.h
new file mode 100644
index 0000000..f90f1dc
--- /dev/null
+++ b/gdb/rdi-share/adperr.h
@@ -0,0 +1,74 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Definitions of ADP error codes
+ */
+
+#ifndef angsd_adperrs_h
+#define angsd_adperrs_h
+/*
+ * ADP failure codes start at 256 to distinguish them for debug purposes
+ */
+enum AdpErrs
+{
+    adp_ok = 0,
+    adp_failed = 256,
+    adp_malloc_failure,
+    adp_illegal_args,
+    adp_device_not_found,
+    adp_device_open_failed,
+    adp_device_already_open,
+    adp_device_not_open,
+    adp_bad_channel_id,
+    adp_callback_already_registered,
+    adp_write_busy,
+    adp_bad_packet,
+    adp_seq_high,
+    adp_seq_low,
+    adp_timeout_on_open,
+    adp_abandon_boot_wait,
+    adp_late_startup,
+    adp_new_agent_starting
+};
+
+#ifndef __cplusplus
+typedef enum AdpErrs AdpErrs;
+#endif
+
+#define AdpMess_Failed             "ADP Error - unspecific failure"
+#define AdpMess_MallocFailed       "ADP Error - malloc failed"
+#define AdpMess_IllegalArgs        "ADP Error - illegal arguments"
+#define AdpMess_DeviceNotFound     "ADP Error - invalid device specified"
+#define AdpMess_DeviceOpenFailed   "ADP Error - specified device failed to open"
+#define AdpMess_DeviceAlreadyOpen  "ADP Error - device already open"
+#define AdpMess_DeviceNotOpen      "ADP Error - device not open"
+#define AdpMess_BadChannelId       "ADP Error - bad channel Id"
+#define AdpMess_CBAlreadyRegd      "ADP Error - callback already registered"
+#define AdpMess_WriteBusy          "ADP Error - write busy"
+#define AdpMess_BadPacket          "ADP Error - bad packet"
+#define AdpMess_SeqHigh            "ADP Error - sequence number too high"
+#define AdpMess_SeqLow             "ADP Error - sequence number too low"
+#define AdpMess_TimeoutOnOpen      "ADP Error - target did not respond"
+#define AdpMess_AbandonBootWait    "abandoned wait for late startup"
+#define AdpMess_LateStartup        "Target compiled with LATE_STARTUP set.\n" \
+                                   "Waiting for target...\n"                  \
+                                   "Press <Ctrl-C> to abort.\n"
+#define AdpMessLen_LateStartup    (3*80)
+#define AdpMess_NewAgentStarting   "New Debug Agent about to start.\n"
+ 
+#endif /* ndef angsd_adperr_h */
+
+/* EOF adperr.h */
diff --git a/gdb/rdi-share/angel.h b/gdb/rdi-share/angel.h
new file mode 100644
index 0000000..60a5f31
--- /dev/null
+++ b/gdb/rdi-share/angel.h
@@ -0,0 +1,177 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*> angel.h <*/
+/*---------------------------------------------------------------------------*/
+/* This header file is the main holder for the declarations and
+ * prototypes for the core Angel system. Some Angel concepts are
+ * described at the start of this file to ensure that a complete view
+ * of the Angel world can be derived purely from the source.
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * NOTE: Currently the Angel source is designed to be simple,
+ * understandable and easy to port to new hardware platforms. However,
+ * this does not always yield the highest performing system. The
+ * current layered approach introduces an overhead to the performance
+ * of the system. In a true commercial target, this code should be
+ * re-designed to build a system where the Angel logical message
+ * system, device driver and hardware accesses are merged to provide
+ * the best performance.
+ */
+/*---------------------------------------------------------------------------*/
+/* Angel overview:
+
+... some comments describing Angel ...
+
+ * Angel is designed as a kit-of-parts that can be used to provide
+ * run-time support for the development of ARM applications. The main
+ * core of Angel is in providing support for the "debug" message
+ * communication with a host system. These messages do not just cover
+ * debugging ARM processes, but also the process of downloading ARM
+ * programs or attaching to executing processes on the target.
+ *
+ * A stand-alone ROM based Angel world is the basic starting point for
+ * a system, since it will allow programs to be downloaded to the
+ * target. The ROM version of Angel will provide the generic debug
+ * support, but no system specific routines. The preferred method of
+ * using Angel is as a link library. This ensures that applications
+ * carry with them the Angel routines necessary to support debugging
+ * (and also ensure that the Angel version is up-to-date, independant
+ * of the version in the target ROM). Eventually, once a program has
+ * been fully debugged, a ROMmed version of the program can be
+ * generated with the Angel code being provided in the application.
+
+.. more comments ..
+
+ * The standard Angel routines do *NOT* perform any dynamic memory
+ * allocation. To simplify the source, and aid the porting to a non C
+ * library world, memory is either pre-allocated (as build-time
+ * globals) or actually given to the particular Angel routine by the
+ * active run-time. This ensures that the interaction between Angel
+ * and the target O/S is minimised.
+ *
+ * Notes: We sub-include more header files to keep the source
+ * modular. Since Angel is a kit-of-parts alternative systems may need
+ * to change the prototypes of particular functions, whilst
+ * maintaining a fixed external interface. e.g. using the standard
+ * DEBUG messages, but with a different communications world.
+ */
+/*---------------------------------------------------------------------------*/
+
+#ifndef __angel_h
+#define __angel_h
+
+/*---------------------------------------------------------------------------*/
+/*-- Global Angel definitions and manifests ---------------------------------*/
+/*---------------------------------------------------------------------------*/
+/* When building Angel we may not include the standard library
+ * headers. However, it is useful coding using standard macro names
+ * since it makes the code easier to understand.
+ */
+
+typedef unsigned int  word ;
+typedef unsigned char byte ;
+
+/* The following typedefs can be used to access I/O registers: */
+typedef volatile unsigned int  vuword ;
+typedef volatile unsigned char vubyte ;
+
+/*
+ * The following typedefs are used when defining objects that may also
+ * be created on a host system, where the word size is not
+ * 32bits. This ensures that the same data values are manipulated.
+ */
+#ifdef TARGET
+typedef unsigned int unsigned32;
+typedef signed int   signed32;
+typedef        int   int32;
+
+typedef unsigned short int unsigned16;
+typedef signed   short int signed16;
+
+/*
+ * yet another solution for the bool/boolean problem, this one is
+ * copied from Scott's modifications to clx/host.h
+ */
+# ifdef IMPLEMENT_BOOL_AS_ENUM
+   enum _bool { _false, _true };
+#  define _bool enum _bool
+# elif defined(IMPLEMENT_BOOL_AS_INT) || !defined(__cplusplus)
+#  define _bool int
+#  define _false 0
+#  define _true 1
+# endif
+
+# ifdef _bool
+#  define bool _bool
+# endif
+
+# ifndef true
+#  define true _true
+#  define false _false
+# endif
+
+# ifndef YES
+#  define YES   true
+#  define NO    false
+# endif
+
+# undef TRUE             /* some OSF headers define as 1 */
+# define TRUE  true
+
+# undef FALSE            /* some OSF headers define as 1 */
+# define FALSE false
+
+# ifndef NULL
+#  define NULL 0
+# endif
+
+#else
+
+# include "host.h"
+
+#endif
+
+#ifndef IGNORE
+# define IGNORE(x) ((x)=(x))
+#endif
+
+/* The following typedef allows us to cast between integral and
+ * function pointers. This isn't allowed by direct casting when
+ * conforming to the ANSI spec.
+ */
+typedef union ansibodge
+{
+ word  w ;
+ word *wp ;
+ void *vp ;
+ byte *bp ;
+ void (*vfn)(void) ;
+ word (*wfn)(void) ;
+ int  (*ifn)(void) ;
+ byte (*bfn)(void) ;
+} ansibodge ;
+
+/*---------------------------------------------------------------------------*/
+
+/* The amount setup aside by the run-time system for stack overflow
+ * handlers to execute in. This must be at least 256bytes, since that
+ * value is assumed by the current ARM Ltd compiler.
+ * This space is _only_ kept for the USR stack, not any of the privileged
+ * mode stacks, as stack overflow on these is always fatal - there is
+ * no point attemptingto recover.  In addition is is important that
+ * Angel should keep privileged stack space requirements to a minimum.
+ */
+#define APCS_STACKGUARD 256
+
+#endif /* __angel_h */
+
+/* EOF angel.h */
diff --git a/gdb/rdi-share/ardi.c b/gdb/rdi-share/ardi.c
new file mode 100644
index 0000000..f61f724
--- /dev/null
+++ b/gdb/rdi-share/ardi.c
@@ -0,0 +1,2672 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARDI.c
+ * Angel Remote Debug Interface
+ *
+ *
+ * $Revision$
+ *     $Date$
+ *
+ * This file is based on /plg/pisd/rdi.c, but instead of using RDP it uses
+ * ADP messages.
+ */
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#define uint HIDE_HPs_uint
+#include <signal.h>
+#undef uint
+
+
+#include "endian.h"
+#include "ardi.h"
+#include "buffers.h"
+#include "channels.h"
+#include "hostchan.h"
+#include "host.h"
+#include "bytesex.h"
+#include "dbg_cp.h"
+#include "adp.h"
+#include "hsys.h"
+#include "logging.h"
+#include "msgbuild.h"
+#include "rxtx.h"
+#include "devsw.h"
+#include "params.h"
+
+#ifdef COMPILING_ON_WINDOWS
+#  define IGNORE(x) (x = x)   /* must go after #includes to work on Windows */
+#endif
+#define NOT(x) (!(x))
+
+#define ADP_INITIAL_TIMEOUT_PERIOD 5
+
+static volatile int executing;
+static int rdi_log = 0 ; /* debugging  ? */
+
+/* we need a starting point for our first buffers, this is a safe one */
+int Armsd_BufferSize = ADP_BUFFER_MIN_SIZE;
+int Armsd_LongBufSize = ADP_BUFFER_MIN_SIZE;
+
+#ifdef WIN32
+  extern int interrupted;
+  extern int swiprocessing;
+#endif
+
+static char dummycline = 0;
+char *ardi_commandline = &dummycline ; /* exported in ardi.h */
+
+extern unsigned int heartbeat_enabled;
+
+static unsigned char *cpwords[16];
+
+typedef struct stoppedProcListElement {
+  struct stoppedProcListElement *next;
+  angel_RDI_TargetStoppedProc *fn;
+  void *arg;
+} stoppedProcListElement;
+
+static stoppedProcListElement *stopped_proc_list=NULL;
+
+const struct Dbg_HostosInterface *angel_hostif;
+static hsys_state *hstate;
+
+static void angel_DebugPrint(const char *format, ...)
+{ va_list ap;
+  va_start(ap, format);
+  angel_hostif->dbgprint(angel_hostif->dbgarg, format, ap);
+  va_end(ap);
+}
+
+#ifdef RDI_VERBOSE
+#define TracePrint(s) \
+  if (rdi_log & 2) angel_DebugPrint("\n"); \
+  if (rdi_log & 1) angel_DebugPrint s
+#else
+#define TracePrint(s)
+#endif
+
+typedef struct receive_dbgmsg_state {
+  volatile int received;
+  Packet *packet;
+} receive_dbgmsg_state;
+
+static receive_dbgmsg_state dbgmsg_state;
+
+static void receive_debug_packet(Packet *packet, void *stateptr)
+{
+  receive_dbgmsg_state *state = stateptr;
+
+  state->packet = packet;
+  state->received = 1;
+}
+
+static int register_debug_message_handler(void)
+{
+  int err;
+  dbgmsg_state.received = 0;
+
+  err = Adp_ChannelRegisterRead(CI_HADP, receive_debug_packet, &dbgmsg_state);
+#ifdef DEBUG
+  if (err!=adp_ok) angel_DebugPrint("register_debug_message_handler failed %i\n", err);
+#endif
+  return err;
+}
+
+
+static int wait_for_debug_message(int *rcode, int *debugID,
+                                  int *OSinfo1, int *OSinfo2,
+                                  int *status, Packet **packet)
+{
+  unsigned int reason;
+
+#ifdef DEBUG
+  angel_DebugPrint("wait_for_debug_message waiting for %X\n", *rcode);
+#endif
+
+  for ( ; dbgmsg_state.received == 0 ; )
+    Adp_AsynchronousProcessing(async_block_on_read);
+
+#ifdef DEBUG
+  angel_DebugPrint("wait_for_debug_message got packet\n");
+#endif
+
+  *packet = dbgmsg_state.packet;
+
+  Adp_ChannelRegisterRead(CI_HADP, NULL, NULL);
+
+  /*
+   * TODO:
+   * If ADP_Unrecognised return error.
+   * If ADP_Acknowledge - handle appropriately.
+   * If expected message read arguments and return RDIError_NoError.
+   * Note: if RDIError occurs then the data values returned are junk
+   */
+
+  unpack_message(BUFFERDATA((*packet)->pk_buffer), "%w%w%w%w%w", &reason, debugID,
+                 OSinfo1, OSinfo2, status);
+  if (reason&0xffffff == ADP_HADPUnrecognised)
+    return RDIError_UnimplementedMessage;
+  if (reason != (unsigned ) *rcode) {
+    if((reason&0xffffff) == ADP_HADPUnrecognised)
+      return RDIError_UnimplementedMessage;
+    else {
+      angel_DebugPrint("ARDI ERROR: Expected reasoncode %x got reasoncode %x.\n",
+             *rcode, reason);
+      return RDIError_Error;
+    }
+  }
+  else
+    return RDIError_NoError;
+  return RDIError_Error;    /* stop a pesky ANSI compiler warning */
+}
+
+
+/*
+ * Handler and registration for logging messages from target
+ */
+static void TargetLogCallback( Packet *packet, void *state )
+{
+    p_Buffer     reply = BUFFERDATA(packet->pk_buffer);
+    unsigned int len   = packet->pk_length;
+    IGNORE(state);
+    angel_hostif->write(angel_hostif->hostosarg,
+                        (char *)reply, len - CHAN_HEADER_SIZE);
+    DevSW_FreePacket(packet);
+
+    packet = DevSW_AllocatePacket(4); /* better not ask for 0 */
+    /* the reply is the ACK - any contents are ignored */
+    if (packet != NULL)
+       Adp_ChannelWrite( CI_TLOG, packet );
+}
+
+static void TargetLogInit( void )
+{
+    AdpErrs err = Adp_ChannelRegisterRead( CI_TLOG, TargetLogCallback, NULL );
+
+#ifdef DEBUG
+    if (err != adp_ok)
+       angel_DebugPrint("CI_TLOG RegisterRead failed %d\n", err);
+#else
+    IGNORE(err);
+#endif
+}
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_open-----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+typedef struct NegotiateState {
+      bool             negotiate_resp;
+      bool             negotiate_ack;
+      bool             link_check_resp;
+      ParameterConfig *accepted_config;
+} NegotiateState;
+
+static void receive_negotiate(Packet *packet, void *stateptr)
+{
+    unsigned reason, debugID, OSinfo1, OSinfo2, status;
+    NegotiateState *n_state = (NegotiateState *)stateptr;
+    p_Buffer reply = BUFFERDATA(packet->pk_buffer);
+
+    unpack_message( reply, "%w%w%w%w",
+                    &reason, &debugID, &OSinfo1, &OSinfo2 );
+    reply += ADP_DEFAULT_HEADER_SIZE;
+
+#ifdef DEBUG
+    angel_DebugPrint( "receive_negotiate: reason %x\n", reason );
+#endif
+
+    switch ( reason )
+    {
+        case ADP_ParamNegotiate | TtoH:
+        {
+            n_state->negotiate_resp = TRUE;
+
+            status = GET32LE( reply );
+            reply += sizeof(word);
+#ifdef DEBUG
+            angel_DebugPrint( "ParamNegotiate status %u\n", status );
+#endif
+            if ( status == RDIError_NoError )
+            {
+                if ( Angel_ReadParamConfigMessage(
+                         reply, n_state->accepted_config ) )
+                   n_state->negotiate_ack = TRUE;
+            }
+            break;
+        }
+
+        case ADP_LinkCheck | TtoH:
+        {
+#ifdef DEBUG
+            angel_DebugPrint( "PONG!\n" );
+#endif
+            n_state->link_check_resp = TRUE;
+            break;
+        }
+
+        default:
+        {
+#ifdef DEBUG
+            angel_DebugPrint( "Unexpected!\n" );
+#endif
+            break;
+        }
+    }
+    DevSW_FreePacket( packet );
+}
+
+# include <sys/types.h>
+#ifdef __unix
+# include <sys/time.h>
+#else
+# include <time.h>
+#endif
+
+/*
+ * convert a config into a single-valued options list
+ */
+static ParameterOptions *config_to_options( const ParameterConfig *config )
+{
+    unsigned int        num_params;
+    size_t              size;
+    ParameterOptions   *base_p;
+
+    num_params  = config->num_parameters;
+    size        =
+        sizeof(ParameterOptions)
+        + num_params*(sizeof(ParameterList) + sizeof(unsigned int));
+    base_p      = malloc( size );
+
+    if ( base_p != NULL )
+    {
+        unsigned int    u;
+        ParameterList  *list_p          =
+            (ParameterList *)((char *)base_p + sizeof(ParameterOptions));
+        unsigned int   *option_p        =
+            (unsigned int *)(list_p + num_params);
+
+        base_p->num_param_lists = num_params;
+        base_p->param_list = list_p;
+
+        for ( u = 0; u < num_params; ++u )
+        {
+            option_p[u]                 = config->param[u].value;
+            list_p[u].type              = config->param[u].type;
+            list_p[u].num_options       = 1;
+            list_p[u].option            = &option_p[u];
+        }
+    }
+
+    return base_p;
+}
+
+static AdpErrs negotiate_params( const ParameterOptions *user_options )
+{
+    Packet                    *packet;
+    unsigned int               count;
+    static Parameter           params[AP_NUM_PARAMS];
+    static ParameterConfig     accepted_config = { AP_NUM_PARAMS, params };
+
+    time_t t;
+
+    static volatile NegotiateState    n_state = {
+        FALSE, FALSE, FALSE, &accepted_config };
+
+#ifdef DEBUG
+    angel_DebugPrint( "negotiate_params\n" );
+#endif
+
+    Adp_ChannelRegisterRead( CI_HBOOT, receive_negotiate, (void *)&n_state );
+
+    packet = (Packet *)DevSW_AllocatePacket(Armsd_BufferSize);
+    count = msgbuild( BUFFERDATA(packet->pk_buffer), "%w%w%w%w",
+                      ADP_ParamNegotiate | HtoT, 0,
+                      ADP_HandleUnknown, ADP_HandleUnknown );
+    count += Angel_BuildParamOptionsMessage(
+        BUFFERDATA(packet->pk_buffer) + count, user_options );
+    packet->pk_length = count;
+    Adp_ChannelWriteAsync( CI_HBOOT, packet );
+
+#ifdef DEBUG
+    angel_DebugPrint( "sent negotiate packet\n" );
+#endif
+
+    t=time(NULL);
+
+    do {
+      Adp_AsynchronousProcessing(async_block_on_nothing);
+
+      if ((time(NULL)-t) > ADP_INITIAL_TIMEOUT_PERIOD) {
+        return adp_timeout_on_open;
+      }
+    } while ( ! n_state.negotiate_resp );
+
+    if ( n_state.negotiate_ack )
+    {
+        /* select accepted config */
+        Adp_Ioctl( DC_SET_PARAMS, (void *)n_state.accepted_config );
+
+        /*
+         * 960430 KWelton
+         *
+         * There is a race in the renegotiation protocol: the
+         * target has to have had time to load new config before
+         * we send the link check packet - insert a deliberate
+         * pause (100ms) to give the target some time
+         */
+        Adp_delay(100000);
+
+        /* do link check */
+        msgsend( CI_HBOOT, "%w%w%w%w", ADP_LinkCheck | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown );
+#ifdef DEBUG
+        angel_DebugPrint("sent link check\n");
+#endif
+
+        do {
+            Adp_AsynchronousProcessing(async_block_on_read);
+        } while ( ! n_state.link_check_resp );
+        Adp_initSeq();
+    }
+    return adp_ok;
+}
+
+static int late_booted = FALSE;
+static bool ardi_handler_installed = FALSE;
+
+#ifdef __unix
+static struct sigaction old_action;
+#else
+static void (*old_handler)();
+#endif
+
+static bool boot_interrupted = FALSE;
+
+static void ardi_sigint_handler(int sig) {
+#ifdef DEBUG
+    if (sig != SIGINT)
+       angel_DebugPrint("Expecting SIGINT got %d.\n", sig);
+#else
+    IGNORE(sig);
+#endif
+    boot_interrupted = TRUE;
+#ifndef __unix
+    signal(SIGINT, ardi_sigint_handler);
+#endif
+}
+
+static void install_ardi_handler( void ) {
+  if (!ardi_handler_installed) {
+    /* install a new Ctrl-C handler so we can abandon waiting */
+#ifdef __unix
+    struct sigaction new_action;
+    sigemptyset(&new_action.sa_mask);
+    new_action.sa_handler = ardi_sigint_handler;
+    new_action.sa_flags = 0;
+    sigaction(SIGINT, &new_action, &old_action);
+#else
+    old_handler = signal(SIGINT, ardi_sigint_handler);
+#endif
+    ardi_handler_installed = TRUE;
+  }
+}
+
+static int angel_RDI_errmess(char *buf, int blen, int errnum);
+
+static void receive_reset_acknowledge(Packet *packet, void *stateptr) {
+  unsigned reason, debugID, OSinfo1, OSinfo2, status;
+  IGNORE(stateptr);
+
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w", &reason, &debugID,
+                 &OSinfo1, &OSinfo2, &status);
+  if (reason==(ADP_Reset | TtoH) && status==AB_NORMAL_ACK) {
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Successfully received normal reset acknowledgement\n");
+    late_booted = FALSE;
+#endif
+  } else if (reason==(ADP_Reset | TtoH) && status==AB_LATE_ACK) {
+    char late_msg[AdpMessLen_LateStartup];
+    int  late_len;
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Successfully received LATE reset acknowledgement\n");
+#endif
+    late_booted = TRUE;
+    install_ardi_handler();
+    late_len = angel_RDI_errmess(late_msg,
+                                 AdpMessLen_LateStartup, adp_late_startup);
+    angel_hostif->write(angel_hostif->hostosarg, late_msg, late_len);
+  } else {
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Bad reset ack: reason=%8X, status=%8X\n", reason, status);
+#endif
+  }
+  DevSW_FreePacket(packet);
+}
+
+static int booted_not_received;
+static unsigned int angel_version;
+static unsigned int adp_version;
+static unsigned int arch_info;
+static unsigned int cpu_info;
+static unsigned int hw_status;
+
+static void receive_booted(Packet *packet, void *stateptr) {
+  unsigned reason, debugID, OSinfo1, OSinfo2, banner_length, bufsiz, longsiz;
+  unsigned i, count;
+
+  IGNORE(stateptr);
+
+  count = unpack_message(BUFFERDATA(packet->pk_buffer),
+                         "%w%w%w%w%w%w%w%w%w%w%w%w",
+                 &reason, &debugID, &OSinfo1, &OSinfo2, &bufsiz, &longsiz,
+                 &angel_version, &adp_version,
+                 &arch_info, &cpu_info, &hw_status, &banner_length);
+  if (reason==(ADP_Booted | TtoH)) {
+#ifdef MONITOR_DOWNLOAD_PACKETS
+    angel_DebugPrint("DEBUG: Successfully received Booted\n");
+    angel_DebugPrint("       cpu_info=%8X, hw_status=%8X, bufsiz=%d, longsiz=%d\n",
+           cpu_info, hw_status, bufsiz, longsiz);
+#endif
+    /* Get the banner from the booted message */
+    for (i=0; i<banner_length; i++)
+      angel_hostif->writec(angel_hostif->hostosarg,
+                          (BUFFERDATA(packet->pk_buffer)+count)[i]);
+
+    booted_not_received=0;
+#ifndef NO_HEARTBEAT
+    heartbeat_enabled = TRUE;
+#endif
+    Armsd_BufferSize = bufsiz + CHAN_HEADER_SIZE;
+    Armsd_LongBufSize = longsiz + CHAN_HEADER_SIZE;
+  } else {
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Bad Booted msg: reason=%8X\n", reason);
+#endif
+  }
+  DevSW_FreePacket(packet);
+}
+
+
+/* forward declaration */
+static int angel_negotiate_defaults( void );
+
+/* Open communications. */
+int angel_RDI_open(
+    unsigned type, Dbg_ConfigBlock const *config,
+    Dbg_HostosInterface const *hostif, struct Dbg_MCState *dbg_state)
+{
+  Packet *packet;
+  int status, reasoncode, debugID, OSinfo1, OSinfo2, err;
+  ParameterOptions *user_options = NULL;
+
+  time_t t;
+
+  IGNORE( dbg_state );
+
+  if ((type & 1) == 0) {
+    /* cold start */
+    if (hostif != NULL) {
+      angel_hostif = hostif;
+      err = HostSysInit(hostif, &ardi_commandline, &hstate);
+      if (err != RDIError_NoError) {
+#ifdef DEBUG
+        angel_DebugPrint("DEBUG: HostSysInit error %i\n",err);
+#endif
+        return err;
+      }
+    }
+    TargetLogInit();
+  }
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Buffer allocated in angel_RDI_open(type=%i).\n",type);
+#endif
+
+  if ((type & 1) == 0) {
+    /* cold start */
+    unsigned endian;
+    Adp_Ioctl( DC_GET_USER_PARAMS, (void *)&user_options );
+    if ( user_options != NULL ) {
+      err = negotiate_params( user_options );
+      if (err != adp_ok) return err;
+    }
+    else {
+      ParameterConfig *default_config = NULL;
+      Adp_Ioctl( DC_GET_DEFAULT_PARAMS, (void *)&default_config );
+      if ( default_config != NULL ) {
+        ParameterOptions *default_options = config_to_options(default_config);
+        err = negotiate_params( default_options );
+        if (err != adp_ok) return err;
+      }
+    }
+
+    /* Register handlers before sending any messages */
+    booted_not_received=1;
+    Adp_ChannelRegisterRead(CI_HBOOT, receive_reset_acknowledge, NULL);
+    Adp_ChannelRegisterRead(CI_TBOOT, receive_booted, NULL);
+    endian = 0;
+    if (config!=NULL) {
+      if (config->bytesex & RDISex_Little) endian |= ADP_BootHostFeature_LittleEnd;
+      if (config->bytesex & RDISex_Big) endian |= ADP_BootHostFeature_BigEnd;
+    }
+    msgsend(CI_HBOOT,"%w%w%w%w%w", ADP_Reset | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown, endian);
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Transmitted Reset message in angel_RDI_open.\n");
+#endif
+
+    /* We will now either get an acknowledgement for the Reset message
+     * or if the target was started after the host, we will get a
+     * rebooted message first.
+     */
+
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: waiting for a booted message\n");
+#endif
+
+    {
+      boot_interrupted = FALSE;
+
+      if (late_booted)
+        install_ardi_handler();
+
+      t=time(NULL);
+
+      do {
+        Adp_AsynchronousProcessing(async_block_on_nothing);
+        if ((time(NULL)-t) > ADP_INITIAL_TIMEOUT_PERIOD && !late_booted) {
+          return adp_timeout_on_open;
+        }
+      } while (booted_not_received && !boot_interrupted);
+
+      if (ardi_handler_installed)
+      {
+        /* uninstall our Ctrl-C handler */
+#ifdef __unix
+        sigaction(SIGINT, &old_action, NULL);
+#else
+        signal(SIGINT, old_handler);
+#endif
+      }
+
+      if (boot_interrupted) {
+        angel_negotiate_defaults();
+        return adp_abandon_boot_wait;
+      }
+    }
+
+    booted_not_received=1;
+    Adp_ChannelRegisterRead(CI_HBOOT, NULL, NULL);
+
+    /* Leave the booted handler installed */
+    msgsend(CI_TBOOT, "%w%w%w%w%w", ADP_Booted | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown, 0);
+    Adp_initSeq();
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Transmitted ADP_Booted acknowledgement.\n");
+    angel_DebugPrint("DEBUG: Boot sequence completed, leaving angel_RDI_open.\n");
+#endif
+
+    return (hw_status & ADP_CPU_BigEndian )? RDIError_BigEndian :
+      RDIError_LittleEndian;
+  }
+  else {
+    /* warm start */
+    register_debug_message_handler();
+
+    msgsend(CI_HADP, "%w%w%w%w",
+            ADP_InitialiseApplication | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown);
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Transmitted Initialise Application\n");
+#endif
+    reasoncode=ADP_InitialiseApplication | TtoH;
+    err = wait_for_debug_message(&reasoncode, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet);
+    if (err != RDIError_NoError) return err;
+    return status;
+  }
+  return -1;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_close----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+static int angel_negotiate_defaults( void ) {
+    int err = adp_ok;
+    ParameterConfig *default_config = NULL;
+    Adp_Ioctl( DC_GET_DEFAULT_PARAMS, (void *)&default_config );
+    if ( default_config != NULL ) {
+        ParameterOptions *default_options = config_to_options(default_config);
+        err = negotiate_params( default_options );
+        free( default_options );
+    }
+    return err;
+}
+
+int angel_RDI_close(void) {
+/*Angel host exit */
+  int err;
+  int status,debugID, OSinfo1,OSinfo2;
+  int reason;
+  Packet *packet = NULL;;
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_Close.\n");
+#endif
+
+  register_debug_message_handler();
+
+  heartbeat_enabled = FALSE;
+
+  err = msgsend(CI_HADP,"%w%w%w%w",ADP_End | HtoT,0,
+          ADP_HandleUnknown, ADP_HandleUnknown);
+  if (err != RDIError_NoError) return err;
+  reason = ADP_End | TtoH;
+  err =  wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                  &status, &packet);
+  DevSW_FreePacket(packet);
+  if (err != RDIError_NoError) return err;
+  if (status == RDIError_NoError) {
+    err = angel_negotiate_defaults();
+    if (err != adp_ok) return err;
+    Adp_Ioctl( DC_RESET, NULL ); /* just to be safe */
+    return HostSysExit(hstate);
+  }
+  else
+      return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_read-----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Read memory contents from target to host: use ADP_Read */
+int angel_RDI_read(ARMword source, void *dest, unsigned *nbytes)
+{
+  Packet *packet=NULL;
+  int len;                               /* Integer to hold message length. */
+  unsigned int nbtogo = *nbytes, nbinpacket, nbdone=0;
+  int rnbytes = 0, status, reason, debugID, OSinfo1, OSinfo2, err;
+  unsigned int maxlen = Armsd_BufferSize-CHAN_HEADER_SIZE-ADP_ReadHeaderSize;
+
+  /* Print debug trace information, this is just copied straight from rdi.c
+     and I can see no reason why it should have to be changed. */
+  TracePrint(("angel_RDI_read: source=%.8lx dest=%p nbytes=%.8x\n",
+                (unsigned long)source, dest, *nbytes));
+  if (*nbytes == 0) return RDIError_NoError;       /* Read nothing - easy! */
+  /* check the buffer size */
+  while (nbtogo >0) {
+    register_debug_message_handler();
+
+    nbinpacket = (nbtogo <= maxlen) ? nbtogo : maxlen;
+    len = msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_Read | HtoT, 0,
+                  ADP_HandleUnknown, ADP_HandleUnknown, source+nbdone,
+                  nbinpacket);
+    reason=ADP_Read | TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet);
+    TracePrint(("angel_RDI_read: nbinpacket =%d status=%08x err = %d\n",
+                nbinpacket,status,err));
+    if (err != RDIError_NoError) return err;       /* Was there an error? */
+    if (status == RDIError_NoError){
+      rnbytes += PREAD(LE,(unsigned int *)(BUFFERDATA(packet->pk_buffer)+20));
+      TracePrint(("angel_RDI_read: rnbytes = %d\n",rnbytes));
+      memcpy(((unsigned char *)dest)+nbdone, BUFFERDATA(packet->pk_buffer)+24,
+             nbinpacket);
+    }
+    nbdone += nbinpacket;
+    nbtogo -= nbinpacket;
+  }
+  *nbytes -= rnbytes;
+  return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_write----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Transfer memory block from host to target.  Use ADP_Write>. */
+int angel_RDI_write(const void *source, ARMword dest, unsigned *nbytes)
+{
+  Packet *packet;/* Message buffers. */
+  unsigned int len, nbtogo = *nbytes, nboffset = 0, nbinpacket;
+  int status, reason, debugID, OSinfo1, OSinfo2, err;
+  unsigned int maxlen = Armsd_LongBufSize-CHAN_HEADER_SIZE-ADP_WriteHeaderSize;
+
+  TracePrint(("angel_RDI_write: source=%p dest=%.8lx nbytes=%.8x\n",
+                 source, (unsigned long)dest, *nbytes));
+
+  if (*nbytes == 0) return RDIError_NoError;
+
+  *nbytes = 0;
+  while (nbtogo > 0) {
+    packet = (Packet *) DevSW_AllocatePacket(Armsd_LongBufSize);
+    nbinpacket = (nbtogo <= maxlen) ? nbtogo : maxlen;
+    len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w",
+                   ADP_Write | HtoT, 0, ADP_HandleUnknown,
+                   ADP_HandleUnknown, dest+nboffset, nbinpacket);
+    /* Copy the data into the packet. */
+
+    memcpy(BUFFERDATA(packet->pk_buffer)+len,
+           ((const unsigned char *) source)+nboffset, nbinpacket);
+    nboffset += nbinpacket;
+    packet->pk_length = nbinpacket+len;
+
+#ifdef MONITOR_DOWNLOAD_PACKETS
+    angel_DebugPrint("angel_RDI_write packet size=%i, bytes done=%i\n",
+            nbinpacket, nboffset);
+#endif
+
+    register_debug_message_handler();
+    Adp_ChannelWrite(CI_HADP, packet);
+    reason=ADP_Write | TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet);
+    nbtogo -= nbinpacket;
+    if (err != RDIError_NoError) return err;
+    if (status == RDIError_NoError)
+      *nbytes += nbinpacket;
+
+    DevSW_FreePacket(packet);
+  }
+  return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_CPUread--------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Reads the values of registers in the CPU, uses ADP_CPUwrite. */
+int angel_RDI_CPUread(unsigned mode, unsigned long mask, ARMword *buffer)
+{
+  unsigned int i, j;
+  Packet *packet = NULL;
+  int err, status, reason, debugID, OSinfo1, OSinfo2;
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_CPUread.\n");
+#endif
+  for (i=0, j=0 ; i < RDINumCPURegs ; i++)
+    if (mask & (1L << i)) j++;            /* Count the number of registers. */
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%c%w", ADP_CPUread | HtoT, 0,
+          ADP_HandleUnknown, ADP_HandleUnknown, mode, mask);
+  reason = ADP_CPUread | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;
+  }
+  if(status == RDIError_NoError) {
+    for (i=0; i<j; i++)
+      buffer[i] = GET32LE(BUFFERDATA(packet->pk_buffer)+20+(i*4));
+    TracePrint(("angel_RDI_CPUread: mode=%.8x mask=%.8lx", mode, mask));
+    DevSW_FreePacket(packet);
+#ifdef RDI_VERBOSE
+    if (rdi_log & 1) {
+      unsigned k;
+      for (k = 0, j = 0 ; j <= 20 ; j++)
+        if (mask & (1L << j)) {
+          angel_DebugPrint("%c%.8lx",k%4==0?'\n':' ',
+                           (unsigned long)buffer[k]);
+          k++ ;
+        }
+      angel_DebugPrint("\n") ;
+    }
+#endif
+
+  }
+  return status;
+}
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_CPUwrite-------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Write CPU registers: use ADP_CPUwrite. */
+int angel_RDI_CPUwrite(unsigned mode, unsigned long mask,
+                      ARMword const *buffer){
+
+  unsigned i, j, c;
+  Packet *packet;
+  int status, reason, debugID, OSinfo1, OSinfo2, err, len;
+
+  TracePrint(("angel_RDI_CPUwrite: mode=%.8x mask=%.8lx", mode, mask));
+#ifdef RDI_VERBOSE
+ if (rdi_log & 1) {
+    for (j = 0, i = 0 ; i <= 20 ; i++)
+       if (mask & (1L << i)) {
+          angel_DebugPrint("%c%.8lx",j%4==0?'\n':' ',
+                           (unsigned long)buffer[j]);
+          j++ ;
+          }
+    angel_DebugPrint("\n") ;
+    }
+#endif
+ packet = (Packet *)DevSW_AllocatePacket(Armsd_BufferSize);
+ for (i=0, j=0; i < RDINumCPURegs ; i++)
+   if (mask & (1L << i)) j++; /* count the number of registers */
+
+ len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%b%w",
+                ADP_CPUwrite | HtoT, 0,
+                ADP_HandleUnknown, ADP_HandleUnknown, mode, mask);
+ for(c=0; c<j; c++)
+   PUT32LE(BUFFERDATA(packet->pk_buffer)+len+(c*4), buffer[c]);
+ packet->pk_length = len+(j*4);
+ register_debug_message_handler();
+
+ Adp_ChannelWrite(CI_HADP, packet);
+ reason = ADP_CPUwrite | TtoH;
+ err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                             &status, &packet);
+ unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w", &reason, &debugID,
+                &OSinfo1, &OSinfo2, &status);
+ DevSW_FreePacket(packet);
+ if (err != RDIError_NoError)
+   return err;      /* Was there an error? */
+ else
+   return status;
+ }
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_CPread---------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Read coprocessor's internal state.  See dbg_cp.h for help.
+ * Use ADP_CPRead.
+ * It would appear that the correct behaviour at this point is to leave
+ * the unpacking to a the caller and to simply copy the stream of data
+ * words into the buffer
+ */
+
+int angel_RDI_CPread(unsigned CPnum, unsigned long mask, ARMword *buffer){
+  Packet *packet = NULL;
+  int i, j, status, reasoncode, OSinfo1, OSinfo2, err, debugID;
+  unsigned char *rmap = cpwords[CPnum];
+  int n;
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_CPread.\n");
+#endif
+  if (rmap == NULL) return RDIError_UnknownCoPro;
+
+  register_debug_message_handler();
+  n = rmap[-1];
+  msgsend(CI_HADP, "%w%w%w%w%b%w", ADP_CPread | HtoT, 0,
+          ADP_HandleUnknown, ADP_HandleUnknown, CPnum, mask);
+  reasoncode=ADP_CPread | TtoH;
+  err = wait_for_debug_message(&reasoncode, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;          /* Was there an error? */
+  }
+  for (j=i=0; i < n ; i++) /* count the number of registers */
+    if (mask & (1L << i)) {
+      j++;
+    }
+  for (i=0; i<j; i++)
+    buffer[i] = PREAD32(LE, BUFFERDATA(packet->pk_buffer) + 20 + (i*4));
+  DevSW_FreePacket(packet);
+  TracePrint(("angel_RDI_CPread: CPnum=%.8x mask=%.8lx\n", CPnum, mask));
+#ifdef RDI_VERBOSE
+  if (rdi_log & 1) {
+    for (i = 0, j = 0; j < n ; j++) {
+      if (mask & (1L << j)) {
+        int nw = rmap[j];
+        angel_DebugPrint("%2d ", j);
+        while (--nw > 0)
+          angel_DebugPrint("%.8lx ", (unsigned long)buffer[i++]);
+        angel_DebugPrint("%.8lx\n", (unsigned long)buffer[i++]);
+      }
+    }
+  }
+#endif
+  return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_CPwrite--------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Write coprocessor's internal state.  See dbg_cp.h for help. Use
+ * ADP_CPwrite.
+ */
+
+int angel_RDI_CPwrite(unsigned CPnum, unsigned long mask,
+                      ARMword const *buffer)
+{
+  Packet *packet = NULL;
+  int i, j, len, status, reason, OSinfo1, OSinfo2, err, debugID;
+  unsigned char *rmap = cpwords[CPnum];
+  int n;
+
+  if (rmap == NULL) return RDIError_UnknownCoPro;
+  n = rmap[-1];
+
+  TracePrint(("angel_RDI_CPwrite: CPnum=%d mask=%.8lx\n", CPnum, mask));
+
+#ifdef RDI_VERBOSE
+ if (rdi_log & 1) {
+    for (i = 0, j = 0; j < n ; j++)
+       if (mask & (1L << j)) {
+          int nw = rmap[j];
+          angel_DebugPrint("%2d ", j);
+          while (--nw > 0)
+             angel_DebugPrint("%.8lx ", (unsigned long)buffer[i++]);
+          angel_DebugPrint("%.8lx\n", (unsigned long)buffer[i++]);
+       }
+ }
+#endif
+
+  for (j=i=0; i < n ; i++) /* Count the number of registers. */
+    if (mask & (1L << i)) j++;
+  packet = DevSW_AllocatePacket(Armsd_BufferSize);
+  len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%c%w",
+                 ADP_CPwrite | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown, CPnum, mask);
+  for(i=0;  i<j; i++)
+    len+=msgbuild(BUFFERDATA(packet->pk_buffer) + len, "%w", buffer[i]);
+  packet->pk_length = len;
+  register_debug_message_handler();
+  Adp_ChannelWrite(CI_HADP, packet);    /* Transmit message. */
+  reason=ADP_CPwrite | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  DevSW_FreePacket(packet);
+  if (err != RDIError_NoError)
+    return err;
+  else
+    return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_pointinq-------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Do test calls to ADP_SetBreak/ADP_SetWatch to see if resources exist to
+   carry out request. */
+int angel_RDI_pointinq(ARMword *address, unsigned type, unsigned datatype,
+                       ARMword *bound)
+{
+  Packet *packet = NULL;
+  int len, status, reason, OSinfo1, OSinfo2, err=RDIError_NoError;
+       /* stop a compiler warning */
+  int debugID, pointhandle;
+  TracePrint(
+      ("angel_RDI_pointinq: address=%.8lx type=%d datatype=%d bound=%.8lx ",
+      (unsigned long)*address, type, datatype, (unsigned long)*bound));
+       /* for a buffer.  */
+  packet = DevSW_AllocatePacket(Armsd_BufferSize);
+  len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%b",
+                 ((datatype == 0) ? ADP_SetBreak : ADP_SetWatch) | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown, address, type);
+  if (datatype == 0)
+    len += msgbuild(BUFFERDATA(packet->pk_buffer) + 21, "%w", bound);
+  else
+    len += msgbuild(BUFFERDATA(packet->pk_buffer) + 21, "%b%w", datatype, bound);
+
+  register_debug_message_handler();
+  packet->pk_length = len;
+  Adp_ChannelWrite(CI_HADP, packet);
+  reason = ((datatype == 0) ? ADP_SetBreak : ADP_SetWatch | TtoH);
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;        /* Was there an error? */
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w",
+                 &reason, &debugID, &OSinfo1, &OSinfo2, &status,
+                 &pointhandle, &address, &bound);
+  DevSW_FreePacket(packet);
+  return err;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_setbreak-------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Set a breakpoint: Use ADP_SetBreak */
+int angel_RDI_setbreak(ARMword address, unsigned type, ARMword bound,
+                      PointHandle *handle)
+{
+  int status, reason, OSinfo1, OSinfo2, err, debugID;
+  int tmpval, tmpaddr, tmpbnd;
+  Packet *packet;
+  TracePrint(("angel_RDI_setbreak address=%.8lx type=%d bound=%.8lx \n",
+              (unsigned long)address, type, (unsigned long)bound));
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%b%w",
+          ADP_SetBreak| HtoT, 0,  ADP_HandleUnknown,
+          ADP_HandleUnknown, address, type, bound);
+  reason = ADP_SetBreak |TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;         /* Was there an error? */
+  }
+  /* Work around varargs problem... -sts */
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w",
+                 &reason, &debugID, &OSinfo1, &OSinfo2, &status,
+                 &tmpval, &tmpaddr, &tmpbnd);
+  *handle = tmpval;
+  address = tmpaddr;
+  bound = tmpbnd;
+  DevSW_FreePacket(packet);
+  if (status != RDIError_NoError) return status;
+  TracePrint(("returns handle %.8lx\n", (unsigned long)*handle));
+  return RDIError_NoError;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_clearbreak-----------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Clear a breakpoint: Use ADP_ClearBreak. */
+int angel_RDI_clearbreak(PointHandle handle)
+{
+  Packet *packet = NULL;
+  int status, reason, OSinfo1, OSinfo2, err, debugID;
+
+  TracePrint(("angel_RDI_clearbreak: handle=%.8lx\n", (unsigned long)handle));
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w",
+          ADP_ClearBreak| HtoT, 0,  ADP_HandleUnknown,
+          ADP_HandleUnknown, handle);
+  reason = ADP_ClearBreak|TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    angel_DebugPrint("***RECEIVE DEBUG MESSAGE RETURNED ERR = %d.\n", err);
+    return err;          /* Was there an error? */
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w",  &reason,
+                 &debugID, &OSinfo1, &OSinfo2, &status);
+  DevSW_FreePacket(packet);
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Clear Break completed OK.\n");
+#endif
+  return RDIError_NoError;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_setwatch-------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Set a watchpoint: use ADP_SetWatch. */
+int angel_RDI_setwatch(ARMword address, unsigned type, unsigned datatype,
+                       ARMword bound, PointHandle *handle)
+{
+  Packet *packet = NULL;
+  int status, reason, OSinfo1, OSinfo2, err, debugID;
+
+  TracePrint(("angel_RDI_setwatch: address=%.8lx type=%d bound=%.8lx ",
+              (unsigned long)address, type, (unsigned long)bound));
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%b%b%w",
+          ADP_SetWatch| HtoT, 0,  ADP_HandleUnknown,
+          ADP_HandleUnknown, address, type, datatype, bound);
+
+  reason = ADP_SetWatch | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;        /* Was there an error? */
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w",
+                 &reason, &debugID, &OSinfo1, &OSinfo2, &status,
+                 handle, &address, &bound);
+  DevSW_FreePacket(packet);
+  TracePrint(("returns handle %.8lx\n", (unsigned long)*handle));
+  return RDIError_NoError;
+}
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_clearwatch-----------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Clear a watchpoint: use ADP_ClearWatch. */
+int angel_RDI_clearwatch(PointHandle handle) {
+
+  int status, reason, OSinfo1, OSinfo2, err, debugID;
+  Packet *packet = NULL;
+
+  TracePrint(("angel_RDI_clearwatch: handle=%.8lx\n", (unsigned long)handle));
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w",
+          ADP_ClearWatch| HtoT, 0,  ADP_HandleUnknown,
+          ADP_HandleUnknown, handle);
+  reason = ADP_ClearWatch|TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;        /* Was there an error? */
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w",  &reason, &debugID,
+                 &OSinfo1, &OSinfo2, &status);
+  DevSW_FreePacket(packet);
+  return RDIError_NoError;
+}
+
+typedef struct {
+  unsigned stopped_reason;
+  int stopped_status;
+  int data;
+} adp_stopped_struct;
+
+
+int angel_RDI_OnTargetStopping(angel_RDI_TargetStoppedProc *fn,
+                               void *arg)
+{
+  stoppedProcListElement **lptr = &stopped_proc_list;
+
+  /* Find the address of the NULL ptr at the end of the list */
+  for (; *lptr!=NULL ; lptr = &((*lptr)->next))
+    ; /* Do nothing */
+
+  *lptr = (stoppedProcListElement *) malloc(sizeof(stoppedProcListElement));
+  if (*lptr == NULL) return RDIError_OutOfStore;
+  (*lptr)->fn = fn;
+  (*lptr)->arg = arg;
+
+  return RDIError_NoError;
+}
+
+static int CallStoppedProcs(unsigned reason)
+{
+  stoppedProcListElement *p = stopped_proc_list;
+  int err=RDIError_NoError;
+  
+  for (; p!=NULL ; p=p->next) {
+    int local_err = p->fn(reason, p->arg);
+    if (local_err != RDIError_NoError) err=local_err;
+  }
+
+  return err;
+}
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_execute--------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+static int HandleStoppedMessage(Packet *packet, void *stateptr) {
+  unsigned int err,  reason, debugID, OSinfo1, OSinfo2, count;
+  adp_stopped_struct *stopped_info;
+  stopped_info = (adp_stopped_struct *) stateptr;
+  IGNORE(stateptr);
+  count = unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w",
+                         &reason, &debugID,
+                         &OSinfo1, &OSinfo2,
+                         &stopped_info->stopped_reason, &stopped_info->data);
+  DevSW_FreePacket(packet);
+
+  if (reason != (ADP_Stopped | TtoH)) {
+#ifdef DEBUG
+    angel_DebugPrint("Expecting stopped message, got %x", reason);
+#endif
+    return RDIError_Error;
+  }
+  else {
+    executing = FALSE;
+#ifdef DEBUG
+    angel_DebugPrint("Received stopped message.\n");
+#endif
+  }
+
+  err = msgsend(CI_TADP,  "%w%w%w%w%w", (ADP_Stopped | HtoT), 0,
+                ADP_HandleUnknown, ADP_HandleUnknown, RDIError_NoError);
+#ifdef DEBUG
+  angel_DebugPrint("Transmiting stopped acknowledge.\n");
+#endif
+  if (err != RDIError_NoError) angel_DebugPrint("Transmit failed.\n");
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Stopped reason : %x\n", stopped_info->stopped_reason);
+#endif
+  switch (stopped_info->stopped_reason) {
+  case ADP_Stopped_BranchThroughZero:
+    stopped_info->stopped_status = RDIError_BranchThrough0;
+    break;
+  case ADP_Stopped_UndefinedInstr:
+    stopped_info->stopped_status = RDIError_UndefinedInstruction;
+    break;
+  case ADP_Stopped_SoftwareInterrupt:
+    stopped_info->stopped_status = RDIError_SoftwareInterrupt;
+    break;
+  case ADP_Stopped_PrefetchAbort:
+    stopped_info->stopped_status = RDIError_PrefetchAbort;
+    break;
+  case ADP_Stopped_DataAbort:
+    stopped_info->stopped_status = RDIError_DataAbort;
+    break;
+  case ADP_Stopped_AddressException:
+    stopped_info->stopped_status = RDIError_AddressException;
+    break;
+  case ADP_Stopped_IRQ:
+    stopped_info->stopped_status = RDIError_IRQ;
+    break;
+  case ADP_Stopped_BreakPoint:
+    stopped_info->stopped_status = RDIError_BreakpointReached;
+    break;
+  case ADP_Stopped_WatchPoint:
+    stopped_info->stopped_status = RDIError_WatchpointAccessed;
+    break;
+  case ADP_Stopped_StepComplete:
+    stopped_info->stopped_status = RDIError_ProgramFinishedInStep;
+    break;
+  case ADP_Stopped_RunTimeErrorUnknown:
+  case ADP_Stopped_StackOverflow:
+  case ADP_Stopped_DivisionByZero:
+    stopped_info->stopped_status = RDIError_Error;
+    break;
+  case ADP_Stopped_FIQ:
+    stopped_info->stopped_status = RDIError_FIQ;
+    break;
+  case ADP_Stopped_UserInterruption:
+  case ADP_Stopped_OSSpecific:
+    stopped_info->stopped_status = RDIError_UserInterrupt;
+    break;
+  case ADP_Stopped_ApplicationExit:
+    stopped_info->stopped_status = RDIError_NoError;
+    break;
+  default:
+    stopped_info->stopped_status = RDIError_NoError;
+    break;
+  }
+  return RDIError_NoError;
+}
+
+static volatile bool interrupt_request = FALSE;
+
+static void interrupt_target( void )
+{
+    Packet *packet = NULL;
+    int err;
+    int reason, debugID, OSinfo1, OSinfo2, status;
+
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: interrupt_target.\n");
+#endif
+
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w", ADP_InterruptRequest | HtoT, 0,
+                   ADP_HandleUnknown, ADP_HandleUnknown);
+
+    reason = ADP_InterruptRequest |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    DevSW_FreePacket(packet);
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: got interrupt ack ok err = %d, status=%i\n",
+                     err, status);
+#endif
+
+    return;
+}
+
+#ifdef TEST_DC_APPL
+  extern void test_dc_appl_handler( const DeviceDescr *device,
+                                    Packet *packet );
+#endif
+
+/* Core functionality for execute and step */
+static int angel_RDI_ExecuteOrStep(PointHandle *handle, word type, 
+                                   unsigned ninstr)
+{
+  int err;
+  adp_stopped_struct stopped_info;
+  void* stateptr = (void *)&stopped_info;
+  ChannelCallback HandleStoppedMessageFPtr=(ChannelCallback) HandleStoppedMessage;
+  int status, reasoncode, debugID, OSinfo1, OSinfo2;
+  Packet *packet = NULL;
+
+  TracePrint(("angel_RDI_ExecuteOrStep\n"));
+
+  err = Adp_ChannelRegisterRead(CI_TADP,
+                                HandleStoppedMessageFPtr, stateptr);
+  if (err != RDIError_NoError) {
+#ifdef DEBUG
+    angel_DebugPrint("TADP Register failed.\n");
+#endif
+    return err;
+  }
+  /* Set executing TRUE here, as it must be set up before the target has
+   * had any chance at all to execute, or it may send its stopped message
+   * before we get round to setting executing = TRUE !!!
+   */
+  executing = TRUE;
+
+  register_debug_message_handler();
+
+#ifdef TEST_DC_APPL
+  Adp_Install_DC_Appl_Handler( test_dc_appl_handler );
+#endif
+
+#ifdef DEBUG
+  angel_DebugPrint("Transmiting %s message.\n",
+                   type == ADP_Execute ? "execute": "step");
+#endif
+
+  register_debug_message_handler();
+  /* Extra ninstr parameter for execute message will simply be ignored */
+  err = msgsend(CI_HADP,"%w%w%w%w%w", type | HtoT, 0,
+                ADP_HandleUnknown, ADP_HandleUnknown, ninstr);
+#if DEBUG
+  if (err != RDIError_NoError) angel_DebugPrint("Transmit failed.\n");
+#endif
+
+  reasoncode = type | TtoH;
+  err = wait_for_debug_message( &reasoncode, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet );
+  if (err != RDIError_NoError)
+     return err;
+  else if (status != RDIError_NoError)
+     return status;
+
+#ifdef DEBUG
+  angel_DebugPrint("Waiting for program to finish...\n");
+#endif
+
+  while( executing )
+  {
+      if (interrupt_request)
+      {
+        interrupt_target();
+        interrupt_request = FALSE;
+      }
+      Adp_AsynchronousProcessing( async_block_on_nothing );
+  }
+
+#ifdef TEST_DC_APPL
+  Adp_Install_DC_Appl_Handler( NULL );
+#endif
+
+  (void)Adp_ChannelRegisterRead(CI_TADP, NULL, NULL);
+
+  *handle = (PointHandle)stopped_info.data;
+
+  CallStoppedProcs(stopped_info.stopped_reason);
+
+  return stopped_info.stopped_status;
+}
+
+/* Request that the target starts executing from the stored CPU state: use
+   ADP_Execute. */
+int angel_RDI_execute(PointHandle *handle)
+{
+    return angel_RDI_ExecuteOrStep(handle, ADP_Execute, 0);
+}
+
+#ifdef __WATCOMC__
+typedef void handlertype(int);
+
+static int interrupted=0;
+
+static void myhandler(int sig) {
+  IGNORE(sig);
+  interrupted=1;
+  signal(SIGINT, myhandler);
+}
+#endif
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_step-----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Step 'ninstr' through the code: use ADP_Step. */
+int angel_RDI_step(unsigned ninstr, PointHandle *handle)
+{
+    int err = angel_RDI_ExecuteOrStep(handle, ADP_Step, ninstr);
+    if (err == RDIError_ProgramFinishedInStep)
+       return RDIError_NoError;
+    else
+       return err;
+}
+
+
+static void SetCPWords(int cpnum, struct Dbg_CoProDesc const *cpd) {
+  int i, rmax = 0;
+  for (i = 0; i < cpd->entries; i++)
+    if (cpd->regdesc[i].rmax > rmax)
+      rmax = cpd->regdesc[i].rmax;
+
+  { unsigned char *rmap = (unsigned char *)malloc(rmax + 2);
+    *rmap++ = rmax + 1;
+    for (i = 0; i < cpd->entries; i++) {
+      int r;
+      for (r = cpd->regdesc[i].rmin; r <= cpd->regdesc[i].rmax; r++)
+        rmap[r] = (cpd->regdesc[i].nbytes+3) / 4;
+      }
+/*    if (cpwords[cpnum] != NULL) free(cpwords[cpnum]); */
+    cpwords[cpnum] = rmap;
+  }
+}
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_info-----------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Use ADP_Info, ADP_Ctrl and ADP_Profile calls to implement these,
+   see adp.h for more details. */
+
+static int angel_cc_exists( void )
+{
+  Packet *packet = NULL;
+  int err;
+  int reason, debugID, OSinfo1, OSinfo2, subreason, status;
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: ADP_ICEB_CC_Exists.\n");
+#endif
+
+  if ( angel_RDI_info( RDIInfo_Icebreaker, NULL, NULL ) == RDIError_NoError ) {
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w", ADP_ICEbreakerHADP | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown,
+            ADP_ICEB_CC_Exists );
+    reason = ADP_ICEbreakerHADP |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                   &debugID, &OSinfo1, &OSinfo2,  &subreason, &status);
+    if (subreason !=  ADP_ICEB_CC_Exists) {
+      DevSW_FreePacket(packet);
+      return RDIError_Error;
+    }
+    else
+      return status;
+  }
+  else
+    return RDIError_UnimplementedMessage;
+}
+
+typedef struct {
+  RDICCProc_ToHost *tohost; void *tohostarg;
+  RDICCProc_FromHost *fromhost; void *fromhostarg;
+  bool registered;
+} CCState;
+static CCState ccstate = { NULL, NULL, NULL, NULL, FALSE };
+
+static void HandleDCCMessage( Packet *packet, void *stateptr )
+{
+  unsigned int reason, debugID, OSinfo1, OSinfo2;
+  int count;
+  CCState *ccstate_p = (CCState *)stateptr;
+
+  count = unpack_message( BUFFERDATA(packet->pk_buffer), "%w%w%w%w",
+                          &reason, &debugID, &OSinfo1, &OSinfo2 );
+  switch ( reason )
+  {
+      case ADP_TDCC_ToHost | TtoH:
+      {
+           /* only handles a single word of data, for now */
+
+          unsigned int nbytes, data;
+
+          unpack_message( BUFFERDATA(packet->pk_buffer)+count, "%w%w",
+                          &nbytes, &data );
+#ifdef DEBUG
+          angel_DebugPrint( "DEBUG: received CC_ToHost message: nbytes %d data %08x.\n",
+                  nbytes, data );
+#endif
+          ccstate_p->tohost( ccstate_p->tohostarg, data );
+          msgsend(CI_TTDCC, "%w%w%w%w%w",
+                  ADP_TDCC_ToHost | HtoT, debugID, OSinfo1, OSinfo2,
+                  RDIError_NoError );
+          break;
+      }
+
+      case ADP_TDCC_FromHost | TtoH:
+      {
+           /* only handles a single word of data, for now */
+
+          int valid;
+          ARMword data;
+
+          ccstate_p->fromhost( ccstate_p->fromhostarg, &data, &valid );
+#ifdef DEBUG
+          angel_DebugPrint( "DEBUG: received CC_FromHost message, returning: %08x %s.\n",
+                  data, valid ? "VALID" : "INvalid" );
+#endif
+          msgsend(CI_TTDCC, "%w%w%w%w%w%w%w",
+                  ADP_TDCC_FromHost | HtoT, debugID, OSinfo1, OSinfo2,
+                  RDIError_NoError, valid ? 1 : 0, data );
+          break;
+      }
+
+      default:
+#ifdef DEBUG
+      angel_DebugPrint( "Unexpected TDCC message %08x received\n", reason );
+#endif
+      break;
+  }
+  DevSW_FreePacket(packet);
+  return;
+}
+
+static void angel_check_DCC_handler( CCState *ccstate_p )
+{
+    int err;
+
+    if ( ccstate_p->tohost != NULL || ccstate_p->fromhost != NULL )
+    {
+        /* doing DCC, so need a handler */
+        if ( ! ccstate_p->registered )
+        {
+#ifdef DEBUG
+            angel_DebugPrint( "Registering handler for TTDCC channel.\n" );
+#endif
+            err = Adp_ChannelRegisterRead( CI_TTDCC, HandleDCCMessage,
+                                           ccstate_p );
+            if ( err == adp_ok )
+               ccstate_p->registered = TRUE;
+#ifdef DEBUG
+            else
+               angel_DebugPrint( "angel_check_DCC_handler: register failed!\n" );
+#endif
+        }
+    }
+    else
+    {
+        /* not doing DCC, so don't need a handler */
+        if ( ccstate_p->registered )
+        {
+#ifdef DEBUG
+            angel_DebugPrint( "Unregistering handler for TTDCC channel.\n" );
+#endif
+            err = Adp_ChannelRegisterRead( CI_TTDCC, NULL, NULL );
+            if ( err == adp_ok )
+               ccstate_p->registered = FALSE;
+#ifdef DEBUG
+            else
+               angel_DebugPrint( "angel_check_DCC_handler: unregister failed!\n" );
+#endif
+        }
+    }
+}
+
+
+static int CheckSubMessageReply(int reason, int subreason) {
+  Packet *packet = NULL;
+  int status, debugID, OSinfo1, OSinfo2;
+  int err = RDIError_NoError;
+  reason |= TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                               &status, &packet);
+  if (err != RDIError_NoError) {
+    status = err;
+  } else {
+    int sr;
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                   &OSinfo1, &OSinfo2, &sr, &status);
+    if (subreason != sr) status = RDIError_Error;
+  }
+  DevSW_FreePacket(packet);
+  return status;
+}
+
+static int SendSubMessageAndCheckReply(int reason, int subreason) {
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w", reason | HtoT, 0,
+          ADP_HandleUnknown, ADP_HandleUnknown,
+          subreason);
+  return CheckSubMessageReply(reason, subreason);
+}
+
+static int SendSubMessageWordAndCheckReply(int reason, int subreason, ARMword word) {
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%w", reason | HtoT, 0,
+          ADP_HandleUnknown, ADP_HandleUnknown,
+          subreason, word);
+  return CheckSubMessageReply(reason, subreason);
+}
+
+static int SendSubMessageGetWordAndCheckReply(int reason, int subreason, ARMword *resp) {
+  Packet *packet = NULL;
+  int status, debugID, OSinfo1, OSinfo2;
+  int err = RDIError_NoError;
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w", reason | HtoT, 0,
+          ADP_HandleUnknown, ADP_HandleUnknown,
+          subreason);
+  reason |= TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                               &status, &packet);
+  if (err != RDIError_NoError) {
+    status = err;
+  } else {
+    int sr;
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w", &reason, &debugID,
+                   &OSinfo1, &OSinfo2,  &sr, &status, resp);
+    if (subreason != sr) status = RDIError_Error;
+  }
+  DevSW_FreePacket(packet);
+  return status;
+}
+
+static int const hostsex = 1;
+
+int angel_RDI_info(unsigned type, ARMword *arg1, ARMword *arg2) {
+  Packet *packet = NULL;
+  int len, status, c, reason, subreason, debugID, OSinfo1, OSinfo2;
+  int err=RDIError_NoError, cpnum=0;
+  struct Dbg_CoProDesc *cpd;
+  int count, i;
+  unsigned char *bp;
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_info.\n");
+#endif
+  switch (type) {
+  case RDIInfo_Target:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_Target.\n");
+#endif
+
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w", ADP_Info | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown, ADP_Info_Target);
+    reason = ADP_Info |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w", &reason,
+                   &debugID, &OSinfo1, &OSinfo2,  &subreason, &status,
+                   arg1, arg2);
+    DevSW_FreePacket(packet);
+
+    if (subreason !=  ADP_Info_Target)
+      return RDIError_Error;
+    else
+      return status;
+
+  case RDISignal_Stop:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDISignal_Stop.\n");
+    if (interrupt_request)
+       angel_DebugPrint("       STILL WAITING to send previous interrupt request\n");
+#endif
+    interrupt_request = TRUE;
+    return RDIError_NoError;
+
+  case RDIInfo_Points:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_Points.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Info, ADP_Info_Points, arg1);
+
+  case RDIInfo_Step:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_Step.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Info, ADP_Info_Step, arg1);
+
+  case RDISet_Cmdline:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDISet_Cmdline.\n");
+#endif
+    if (ardi_commandline != &dummycline)
+      free(ardi_commandline);
+    ardi_commandline = (char *)malloc(strlen((char*)arg1) + 1) ;
+    (void)strcpy(ardi_commandline, (char *)arg1) ;
+    return RDIError_NoError;
+
+  case RDIInfo_SetLog:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_SetLog.\n");
+#endif
+    rdi_log = (int) *arg1;
+    return RDIError_NoError;
+
+  case RDIInfo_Log:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_Log.\n");
+#endif
+    *arg1 = rdi_log;
+    return RDIError_NoError;
+
+
+  case RDIInfo_MMU:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_MMU.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Info, ADP_Info_MMU, arg1);
+
+  case RDIInfo_SemiHosting:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_SemiHosting.\n");
+#endif
+    return SendSubMessageAndCheckReply(ADP_Info, ADP_Info_SemiHosting);
+
+  case RDIInfo_CoPro:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_CoPro.\n");
+#endif
+    return SendSubMessageAndCheckReply(ADP_Info, ADP_Info_CoPro);
+
+  case RDICycles:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDICycles.\n");
+#endif
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w", ADP_Info | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown, ADP_Info_Cycles);
+    reason = ADP_Info |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                 &OSinfo1, &OSinfo2,  &subreason, &status);
+    DevSW_FreePacket(packet);
+    if (subreason !=  ADP_Info_Cycles)
+      return RDIError_Error;
+    if (status != RDIError_NoError) return status;
+    for (c=0; c<12; c++)
+      arg1[c]=GET32LE(BUFFERDATA(packet->pk_buffer)+24+(c*4));
+    return status;
+
+  case RDIInfo_DescribeCoPro:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_DescribeCoPro.\n");
+#endif
+    cpnum = *(int *)arg1;
+    cpd = (struct Dbg_CoProDesc *)arg2;
+    packet = DevSW_AllocatePacket(Armsd_BufferSize);
+    if (angel_RDI_info(ADP_Info_CoPro, NULL, NULL) != RDIError_NoError)
+      return RDIError_Error;
+    len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w", ADP_Info | HtoT, 0,
+                   ADP_HandleUnknown, ADP_HandleUnknown,
+                   ADP_Info_DescribeCoPro);
+    len +=msgbuild(BUFFERDATA(packet->pk_buffer)+20, "%b%b%b%b%b", cpnum,
+                   cpd->regdesc[cpnum].rmin, cpd->regdesc[cpnum].rmax,
+                   cpd->regdesc[cpnum].nbytes, cpd->regdesc[cpnum].access);
+    if (cpd->regdesc[cpnum].access&0x3 == 0x3){
+      len += msgbuild(BUFFERDATA(packet->pk_buffer)+25, "%b%b%b%b%b",
+                      cpd->regdesc[cpnum].accessinst.cprt.read_b0,
+                      cpd->regdesc[cpnum].accessinst.cprt.read_b1,
+                      cpd->regdesc[cpnum].accessinst.cprt.write_b0,
+                      cpd->regdesc[cpnum].accessinst.cprt.write_b1, 0xff);
+    }
+    else {
+      len += msgbuild(BUFFERDATA(packet->pk_buffer)+25, "%b%b%b%b%b%",
+                      cpd->regdesc[cpnum].accessinst.cpdt.rdbits,
+                      cpd->regdesc[cpnum].accessinst.cpdt.nbit,0,0, 0xff);
+    }
+    register_debug_message_handler();
+    packet->pk_length = len;
+    Adp_ChannelWrite(CI_HADP, packet); /* Transmit message. */
+    reason = ADP_Info |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                   &OSinfo1, &OSinfo2, &subreason, &status);
+    DevSW_FreePacket(packet);
+    if (subreason != ADP_Info_DescribeCoPro)
+      return RDIError_Error;
+    else
+      return status;
+
+  case RDIInfo_RequestCoProDesc:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: RDIInfo_RequestCoProDesc.\n");
+#endif
+    cpnum = *(int *)arg1;
+    cpd = (struct Dbg_CoProDesc *)arg2;
+    packet = DevSW_AllocatePacket(Armsd_BufferSize);
+    len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w", ADP_Info | HtoT, 0,
+                   ADP_HandleUnknown, ADP_HandleUnknown,
+                   ADP_Info_RequestCoProDesc);
+    len += msgbuild(BUFFERDATA(packet->pk_buffer)+20, "%b", *(int *)arg1);
+    packet->pk_length = len;
+    register_debug_message_handler();
+    Adp_ChannelWrite(CI_HADP, packet); /* Transmit message. */
+    reason = ADP_Info |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    count = unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                           &debugID, &OSinfo1, &OSinfo2,  &subreason, &status);
+    if (subreason !=  ADP_Info_RequestCoProDesc) {
+      DevSW_FreePacket(packet);
+      return RDIError_Error;
+    } else if ( status != RDIError_NoError ) {
+      DevSW_FreePacket(packet);
+      return status;
+    } else {
+      bp = BUFFERDATA(packet->pk_buffer)+count;
+      for ( i = 0; *bp != 0xFF && i < cpd->entries; ++i ) {
+        cpd->regdesc[i].rmin = *bp++;
+        cpd->regdesc[i].rmax = *bp++;
+        cpd->regdesc[i].nbytes = *bp++;
+        cpd->regdesc[i].access = *bp++;
+      }
+      cpd->entries = i;
+      if ( *bp != 0xFF )
+        status = RDIError_BufferFull;
+      else
+        SetCPWords( cpnum, cpd );
+      DevSW_FreePacket(packet);
+      return status;
+    }
+
+  case RDIInfo_GetLoadSize:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Info_AngelBufferSize.\n");
+#endif
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w", ADP_Info | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown,
+            ADP_Info_AngelBufferSize);
+    reason = ADP_Info |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                   &debugID, &OSinfo1, &OSinfo2,  &subreason, &status);
+    if (subreason !=  ADP_Info_AngelBufferSize) {
+      DevSW_FreePacket(packet);
+      return RDIError_Error;
+    }
+    else {
+      word defaultsize, longsize;
+      unpack_message(BUFFERDATA(packet->pk_buffer)+24, "%w%w",
+                     &defaultsize, &longsize);
+      *arg1 = longsize - ADP_WriteHeaderSize;   /* space for ADP header */
+#ifdef MONITOR_DOWNLOAD_PACKETS
+      angel_DebugPrint("DEBUG: ADP_Info_AngelBufferSize: got (%d, %d), returning %d.\n",
+             defaultsize, longsize, *arg1);
+#endif
+      DevSW_FreePacket(packet);
+      return status;
+    }
+
+  case RDIVector_Catch:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_VectorCatch %lx.\n", *arg1);
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_VectorCatch, *arg1);
+
+  case RDISemiHosting_SetState:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_SetState %lx.\n", *arg1);
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_SetState, *arg1);
+
+  case RDISemiHosting_GetState:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_GetState.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_GetState, arg1);
+
+  case RDISemiHosting_SetVector:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_SetVector %lx.\n", *arg1);
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_SetVector, *arg1);
+
+  case RDISemiHosting_GetVector:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_GetVector.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_GetVector, arg1);
+
+  case RDISemiHosting_SetARMSWI:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_SetARMSWI.\n");
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_SetARMSWI, *arg1);
+
+  case RDISemiHosting_GetARMSWI:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_GetARMSWI.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_GetARMSWI, arg1);
+
+  case RDISemiHosting_SetThumbSWI:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_SetThumbSWI.\n");
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_SetThumbSWI, *arg1);
+
+  case RDISemiHosting_GetThumbSWI:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SemiHosting_GetThumbSWI.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_Control, ADP_Ctrl_SemiHosting_GetThumbSWI, arg1);
+
+  case RDIInfo_SetTopMem:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_SetTopMem.\n");
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Control, ADP_Ctrl_SetTopMem, *arg1);
+
+  case RDIPointStatus_Watch:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_PointStatus_Watch.\n");
+#endif
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_Control | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown,
+            ADP_Ctrl_PointStatus_Watch, *arg1 );
+    reason = ADP_Control |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w", &reason,
+                   &debugID, &OSinfo1, &OSinfo2,  &subreason, &status,
+                   arg1, arg2);
+    if (subreason !=  ADP_Ctrl_PointStatus_Watch) {
+      DevSW_FreePacket(packet);
+      return RDIError_Error;
+    }
+    else
+      return status;
+
+  case RDIPointStatus_Break:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_PointStatus_Break.\n");
+#endif
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_Control | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown,
+            ADP_Ctrl_PointStatus_Break, *arg1 );
+    reason = ADP_Control |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    }
+    unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w", &reason,
+                   &debugID, &OSinfo1, &OSinfo2,  &subreason, &status,
+                   arg1, arg2);
+    if (subreason !=  ADP_Ctrl_PointStatus_Break) {
+      DevSW_FreePacket(packet);
+      return RDIError_Error;
+    }
+    else
+      return status;
+
+  case RDIInfo_DownLoad:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Ctrl_Download_Supported.\n");
+#endif
+    return SendSubMessageAndCheckReply(ADP_Control, ADP_Ctrl_Download_Supported);
+
+  case RDIConfig_Count:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEM_ConfigCount.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_ICEman, ADP_ICEM_ConfigCount, arg1);
+
+  case RDIConfig_Nth:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEM_ConfigNth.\n");
+#endif
+    register_debug_message_handler();
+    msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_ICEman | HtoT, 0,
+            ADP_HandleUnknown, ADP_HandleUnknown,
+            ADP_ICEM_ConfigNth, *arg1 );
+    reason = ADP_ICEman |TtoH;
+    err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+    if (err != RDIError_NoError) {
+      DevSW_FreePacket(packet);
+      return err;
+    } else {
+      RDI_ConfigDesc *cd = (RDI_ConfigDesc *)arg2;
+      unsigned char n;
+      len = unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%b",
+                           &reason, &debugID,
+                           &OSinfo1, &OSinfo2,  &subreason, &status,
+                           &cd->version, &n);
+      if (subreason !=  ADP_ICEM_ConfigNth) {
+        DevSW_FreePacket(packet);
+        return RDIError_Error;
+      }
+      else {
+        memcpy( cd->name, BUFFERDATA(packet->pk_buffer)+len, n+1 );
+        cd->name[n] = 0;
+        return status;
+      }
+    }
+
+  case RDIInfo_Icebreaker:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEB_Exists.\n");
+#endif
+    return SendSubMessageAndCheckReply(ADP_ICEbreakerHADP, ADP_ICEB_Exists);
+
+  case RDIIcebreaker_GetLocks:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEB_GetLocks.\n");
+#endif
+    return SendSubMessageGetWordAndCheckReply(ADP_ICEbreakerHADP, ADP_ICEB_GetLocks, arg1);
+
+  case RDIIcebreaker_SetLocks:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEB_SetLocks.\n");
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_ICEbreakerHADP, ADP_ICEB_SetLocks, *arg1);
+
+  case RDICommsChannel_ToHost:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEB_CC_Connect_ToHost.\n");
+#endif
+    if ( angel_cc_exists() == RDIError_NoError ) {
+
+    /*
+     * The following three lines of code have to be removed in order to get
+     * the Windows Angel Channel Viewer working with the Thumb comms channel.
+     * At the moment it allows the ARMSD command line to register a CCIN/CCOUT
+     * callback which stops the ACV working!
+     */
+#ifdef __unix
+      ccstate.tohost = (RDICCProc_ToHost *)arg1;
+      ccstate.tohostarg = arg2;
+      angel_check_DCC_handler( &ccstate );
+#endif
+#ifdef _WIN32
+      
+#endif
+
+      register_debug_message_handler();
+      msgsend(CI_HADP, "%w%w%w%w%w%b", ADP_ICEbreakerHADP | HtoT, 0,
+              ADP_HandleUnknown, ADP_HandleUnknown,
+              ADP_ICEB_CC_Connect_ToHost, (arg1 != NULL) );
+      return CheckSubMessageReply(ADP_ICEbreakerHADP, ADP_ICEB_CC_Connect_ToHost);
+    } else {
+      return RDIError_UnimplementedMessage;
+    }
+
+  case RDICommsChannel_FromHost:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_ICEB_CC_Connect_FromHost.\n");
+#endif
+    if ( angel_cc_exists() == RDIError_NoError ) {
+
+      ccstate.fromhost = (RDICCProc_FromHost *)arg1;
+      ccstate.fromhostarg = arg2;
+      angel_check_DCC_handler( &ccstate );
+
+      register_debug_message_handler();
+      msgsend(CI_HADP, "%w%w%w%w%w%b", ADP_ICEbreakerHADP | HtoT, 0,
+              ADP_HandleUnknown, ADP_HandleUnknown,
+              ADP_ICEB_CC_Connect_FromHost, (arg1 != NULL) );
+      return CheckSubMessageReply(ADP_ICEbreakerHADP, ADP_ICEB_CC_Connect_FromHost);
+    } else {
+      return RDIError_UnimplementedMessage;
+    }
+
+  case RDIProfile_Stop:
+    return SendSubMessageAndCheckReply(ADP_Profile, ADP_Profile_Stop);
+
+  case RDIProfile_ClearCounts:
+    return SendSubMessageAndCheckReply(ADP_Profile, ADP_Profile_ClearCounts);
+
+  case RDIProfile_Start:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: ADP_Profile_Start %ld.\n", (long)*arg1);
+#endif
+    return SendSubMessageWordAndCheckReply(ADP_Profile, ADP_Profile_Start, *arg1);
+
+  case RDIProfile_WriteMap:
+    { RDI_ProfileMap *map = (RDI_ProfileMap *)arg1;
+      int32 maplen = map->len,
+            offset,
+            size;
+      int32 chunk = (Armsd_LongBufSize-CHAN_HEADER_SIZE-ADP_ProfileWriteHeaderSize) / sizeof(ARMword);
+                     /* Maximum number of words sendable in one message */
+      int oldrev = bytesex_reversing();
+      int host_little = *(uint8 const *)&hostsex;
+#ifdef DEBUG
+      angel_DebugPrint("DEBUG: ADP_Profile_WriteMap %ld.\n", maplen);
+#endif
+      status = RDIError_NoError;
+      if (!host_little) {
+        bytesex_reverse(1);
+        for (offset = 0; offset < maplen; offset++)
+          map->map[offset] = bytesex_hostval(map->map[offset]);
+      }
+      for (offset = 0; offset < maplen; offset += size) {
+        unsigned hdrlen;
+        size = maplen - offset;
+        packet = (Packet *)DevSW_AllocatePacket(Armsd_LongBufSize);
+        if (size > chunk) size = chunk;
+        hdrlen = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w%w",
+                          ADP_Profile | HtoT, 0, ADP_HandleUnknown,
+                          ADP_HandleUnknown, ADP_Profile_WriteMap,
+                          maplen, size, offset);
+
+        /* Copy the data into the packet. */
+        memcpy(BUFFERDATA(packet->pk_buffer)+hdrlen,
+               &map->map[offset], (size_t)size * sizeof(ARMword));
+        packet->pk_length = size * sizeof(ARMword) + hdrlen;
+        register_debug_message_handler();
+        Adp_ChannelWrite(CI_HADP, packet);
+        reason = ADP_Profile | TtoH;
+        err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                     &status, &packet);
+        if (err == RDIError_NoError) {
+          unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                         &debugID, &OSinfo1, &OSinfo2, &subreason, &status);
+          if (subreason !=  ADP_Profile_WriteMap) {
+            err = RDIError_Error;
+          }
+          DevSW_FreePacket(packet);
+        }
+        if (err != RDIError_NoError) { status = err; break; }
+      }
+      if (!host_little) {
+        for (offset = 0; offset < maplen; offset++)
+          map->map[offset] = bytesex_hostval(map->map[offset]);
+        bytesex_reverse(oldrev);
+      }
+      return status;
+    }
+
+  case RDIProfile_ReadMap:
+    { int32 maplen = *(int32 *)arg1,
+            offset = 0,
+            size;
+      int32 chunk = (Armsd_BufferSize-CHAN_HEADER_SIZE-ADP_ProfileReadHeaderSize) / sizeof(ARMword);
+#ifdef DEBUG
+      angel_DebugPrint("DEBUG: ADP_Profile_ReadMap %ld.\n", maplen);
+#endif
+      status = RDIError_NoError;
+      for (offset = 0; offset < maplen; offset += size) {
+        size = maplen - offset;
+        if (size > chunk) size = chunk;
+        register_debug_message_handler();
+        msgsend(CI_HADP, "%w%w%w%w%w%w%w", ADP_Profile | HtoT, 0,
+                ADP_HandleUnknown, ADP_HandleUnknown,
+                ADP_Profile_ReadMap, offset, size);
+        reason = ADP_Profile | TtoH;
+        err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                                     &status, &packet);
+        if (err != RDIError_NoError) return err;
+        unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                       &debugID, &OSinfo1, &OSinfo2, &subreason, &status);
+        memcpy(&arg2[offset], BUFFERDATA(packet->pk_buffer)+ADP_ProfileReadHeaderSize,
+               size * sizeof(ARMword));
+        DevSW_FreePacket(packet);
+        if (status != RDIError_NoError) break;
+      }
+      { int oldrev = bytesex_reversing();
+        int host_little = *(uint8 const *)&hostsex;
+        if (!host_little) {
+          bytesex_reverse(1);
+          for (offset = 0; offset < maplen; offset++)
+            arg2[offset] = bytesex_hostval(arg2[offset]);
+        }
+        bytesex_reverse(oldrev);
+      }
+      return status;
+    }
+
+  case RDIInfo_CanTargetExecute:
+#ifdef DEBUG
+    printf("DEBUG: RDIInfo_CanTargetExecute.\n");
+#endif
+    return SendSubMessageAndCheckReply(ADP_Info, ADP_Info_CanTargetExecute);
+
+  case RDIInfo_AgentEndianess:
+    return SendSubMessageAndCheckReply(ADP_Info, ADP_Info_AgentEndianess);
+
+  default:
+#ifdef DEBUG
+    angel_DebugPrint("DEBUG: Fell through ADP_Info, default case taken.\n");
+    angel_DebugPrint("DEBUG: type = 0x%x.\n", type);
+#endif
+    if (type & RDIInfo_CapabilityRequest) {
+      switch (type & ~RDIInfo_CapabilityRequest) {
+        case RDISemiHosting_SetARMSWI:
+          return SendSubMessageAndCheckReply(ADP_Info, ADP_Info_ChangeableSHSWI);
+        default:
+#ifdef DEBUG
+          angel_DebugPrint(
+          "DEBUG: ADP_Info - Capability Request(%d) - reporting unimplemented \n",
+                 type & ~RDIInfo_CapabilityRequest);
+#endif
+          break;
+      }
+    }
+    return RDIError_UnimplementedMessage;
+  }
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_AddConfig------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Add a configuration: use ADP_ICEM_AddConfig. */
+int angel_RDI_AddConfig(unsigned long nbytes) {
+  Packet *packet = NULL;
+  int status, reason, subreason, debugID, OSinfo1, OSinfo2, err;
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_AddConfig.\n");
+#endif
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_ICEman | HtoT,
+          0, ADP_HandleUnknown, ADP_HandleUnknown,
+          ADP_ICEM_AddConfig, nbytes);
+  reason=ADP_ICEman | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return -1;
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                 &OSinfo1, &OSinfo2, &subreason, &status);
+  DevSW_FreePacket(packet);
+  if ( subreason != ADP_ICEM_AddConfig )
+    return RDIError_Error;
+  else
+    return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_LoadConfigData-------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Load configuration data: use ADP_Ctrl_Download_Data. */
+int angel_RDI_LoadConfigData(unsigned long nbytes, char const *data) {
+  Packet *packet = NULL;
+  int len, status, reason, subreason, debugID, OSinfo1, OSinfo2, err;
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_LoadConfigData (%d bytes)\n", nbytes);
+#endif
+#if 0
+  if (err = angel_RDI_AddConfig(nbytes) != RDIError_NoError)
+    return err;
+#endif
+  packet = DevSW_AllocatePacket(Armsd_LongBufSize);
+  len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w",
+                 ADP_Control | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown,
+                 ADP_Ctrl_Download_Data, nbytes);
+  memcpy(BUFFERDATA(packet->pk_buffer)+len, data, nbytes);
+  len += nbytes;
+  packet->pk_length = len;
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: packet len %d.\n", len);
+#endif
+  register_debug_message_handler();
+  Adp_ChannelWrite(CI_HADP, packet);
+  reason=ADP_Control | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return -1;
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                 &OSinfo1, &OSinfo2, &subreason, &status);
+  DevSW_FreePacket(packet);
+  if ( subreason != ADP_Ctrl_Download_Data )
+    return RDIError_Error;
+  else
+    return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_SelectConfig---------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Select a configuration: use ADP_ICEM_SelecConfig.*/
+int angel_RDI_SelectConfig(RDI_ConfigAspect aspect, char const *name,
+                           RDI_ConfigMatchType matchtype, unsigned versionreq,
+                            unsigned *versionp)
+{
+  Packet *packet = NULL;
+  int len, status, reason, subreason, debugID, OSinfo1, OSinfo2, err;
+
+#ifdef DEBUG
+  angel_DebugPrint("DEBUG: Entered angel_RDI_SelectConfig.\n");
+#endif
+  packet = DevSW_AllocatePacket(Armsd_BufferSize);
+  len = msgbuild(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%b%b%b%w",
+                 ADP_ICEman | HtoT, 0,
+                 ADP_HandleUnknown, ADP_HandleUnknown,
+                 ADP_ICEM_SelectConfig, aspect, strlen(name),
+                 matchtype, versionreq);
+  /* copy the name into the buffer */
+  memcpy(BUFFERDATA(packet->pk_buffer)+len, name, strlen(name));
+  len += strlen(name);
+  packet->pk_length = len;
+  register_debug_message_handler();
+  Adp_ChannelWrite(CI_HADP, packet);
+  reason=ADP_ICEman | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return err;
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w%w",
+                 &reason, &debugID, &OSinfo1, &OSinfo2,
+                 &subreason, &status, versionp);
+  DevSW_FreePacket(packet);
+  if ( subreason != ADP_ICEM_SelectConfig )
+    return RDIError_Error;
+  else
+    return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/*----angel_RDI_LoadAgent------------------------------------------------*/
+/*----------------------------------------------------------------------*/
+
+/* Load a new debug agent: use ADP_Ctrl_Download_Agent. */
+int angel_RDI_LoadAgent(ARMword dest, unsigned long size,
+                       getbufferproc *getb, void *getbarg)
+{
+  Packet *packet = NULL;
+  int  status, reason, subreason, debugID, OSinfo1, OSinfo2, err;
+  time_t t;
+
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+  angel_DebugPrint("DEBUG: Entered angel_RDI_LoadAgent.\n");
+#endif
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%w%w", ADP_Control | HtoT,
+          0, ADP_HandleUnknown, ADP_HandleUnknown,
+          ADP_Ctrl_Download_Agent, dest, size);
+  reason=ADP_Control | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return -1;
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason, &debugID,
+                 &OSinfo1, &OSinfo2, &subreason, &status);
+    DevSW_FreePacket(packet);
+  if ( subreason != ADP_Ctrl_Download_Agent )
+    return RDIError_Error;
+  if ( status != RDIError_NoError )
+    return status;
+
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+  angel_DebugPrint("DEBUG: starting agent data download.\n");
+#endif
+  { unsigned long pos = 0, segsize;
+    for (; pos < size; pos += segsize) {
+      char *b = getb(getbarg, &segsize);
+      if (b == NULL) return RDIError_NoError;
+      err = angel_RDI_LoadConfigData( segsize, b );
+      if (err != RDIError_NoError) return err;
+    }
+  }
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+  angel_DebugPrint("DEBUG: finished downloading new agent.\n");
+#endif
+
+  /* renegotiate back down */
+  err = angel_negotiate_defaults();
+  if (err != adp_ok)
+     return err;
+
+  /* Output a message to tell the user what is going on.  This is vital
+   * when switching from ADP EICE to ADP over JTAG, as then the user
+   * has to reset the target board !
+   */
+  { char msg[256];
+    int len=angel_RDI_errmess(msg, 256, adp_new_agent_starting);
+    angel_hostif->write(angel_hostif->hostosarg, msg, len);
+  }
+
+  /* get new image started */
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+  angel_DebugPrint("DEBUG: sending start message for new agent.\n");
+#endif
+
+  register_debug_message_handler();
+  msgsend(CI_HADP, "%w%w%w%w%w%w", ADP_Control | HtoT,
+          0, ADP_HandleUnknown, ADP_HandleUnknown,
+          ADP_Ctrl_Start_Agent, dest);
+  reason=ADP_Control | TtoH;
+  err = wait_for_debug_message(&reason, &debugID, &OSinfo1, &OSinfo2,
+                              &status, &packet);
+  if (err != RDIError_NoError) {
+    DevSW_FreePacket(packet);
+    return -1;
+  }
+  unpack_message(BUFFERDATA(packet->pk_buffer), "%w%w%w%w%w%w", &reason,
+                 &debugID, &OSinfo1, &OSinfo2, &subreason, &status);
+    DevSW_FreePacket(packet);
+  if ( subreason != ADP_Ctrl_Start_Agent )
+    return RDIError_Error;
+  if ( status != RDIError_NoError )
+    return status;
+
+  /* wait for image to start up */
+  heartbeat_enabled = FALSE;
+  t=time(NULL);
+  do {
+    Adp_AsynchronousProcessing(async_block_on_nothing);
+    if ((time(NULL)-t) > 2) {
+#ifdef DEBUG
+      angel_DebugPrint("DEBUG: no booted message from new image yet.\n");
+#endif
+      break;
+    }
+  } while (booted_not_received);
+  booted_not_received=1;
+
+  /* Give device driver a chance to do any necessary resyncing with new agent.
+   * Only used by etherdrv.c at the moment.
+   */
+  (void)Adp_Ioctl( DC_RESYNC, NULL );
+
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+  angel_DebugPrint("DEBUG: reopening to new agent.\n");
+#endif
+  err = angel_RDI_open(0, NULL, NULL, NULL);
+  switch ( err )
+  {
+      case RDIError_NoError:
+      {
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+          angel_DebugPrint( "LoadAgent: Open returned RDIError_NoError\n" );
+#endif
+          break;
+      }
+
+      case RDIError_LittleEndian:
+      {
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+          angel_DebugPrint( "LoadAgent: Open returned RDIError_LittleEndian (OK)\n" );
+#endif
+          err = RDIError_NoError;
+          break;
+      }
+
+      case RDIError_BigEndian:
+      {
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+          angel_DebugPrint( "LoadAgent: Open returned RDIError_BigEndian (OK)\n" );
+#endif
+          err = RDIError_NoError;
+          break;
+      }
+
+      default:
+      {
+#if defined(DEBUG) || defined(DEBUG_LOADAGENT)
+          angel_DebugPrint( "LoadAgent: Open returned %d - unexpected!\n", err );
+#endif
+          break;
+      }
+  }
+#ifndef NO_HEARTBEAT
+  heartbeat_enabled = TRUE;
+#endif
+  return err;
+}
+
+static int angel_RDI_errmess(char *buf, int blen, int errnum) {
+  char *s=NULL;
+  int n;
+
+  switch (errnum) {
+    case adp_malloc_failure:
+      s=AdpMess_MallocFailed; break;
+    case adp_illegal_args:
+      s=AdpMess_IllegalArgs; break;
+    case adp_device_not_found:
+      s=AdpMess_DeviceNotFound; break;
+    case adp_device_open_failed:
+      s=AdpMess_DeviceOpenFailed; break;
+    case adp_device_already_open:
+      s=AdpMess_DeviceAlreadyOpen; break;
+    case adp_device_not_open:
+      s=AdpMess_DeviceNotOpen; break;
+    case adp_bad_channel_id:
+      s=AdpMess_BadChannelId; break;
+    case adp_callback_already_registered:
+      s=AdpMess_CBAlreadyRegd; break;
+    case adp_write_busy:
+      s=AdpMess_WriteBusy; break;
+    case adp_bad_packet:
+      s=AdpMess_BadPacket; break;
+    case adp_seq_high:
+      s=AdpMess_SeqHigh; break;
+    case adp_seq_low:
+      s=AdpMess_SeqLow; break;
+    case adp_timeout_on_open:
+      s=AdpMess_TimeoutOnOpen; break;
+    case adp_failed:
+      s=AdpMess_Failed; break;
+    case adp_abandon_boot_wait:
+      s=AdpMess_AbandonBootWait; break;
+    case adp_late_startup:
+      s=AdpMess_LateStartup; break;
+    case adp_new_agent_starting:
+      s=AdpMess_NewAgentStarting; break;
+    default: return 0;
+  }
+  n=strlen(s);
+  if (n>blen-1) n=blen-1;
+  memcpy(buf, s, n);
+  buf[n++]=0;
+  return n;
+}
+
+extern const struct RDIProcVec angel_rdi;
+const struct RDIProcVec angel_rdi = {
+    "ADP",
+    angel_RDI_open,
+    angel_RDI_close,
+    angel_RDI_read,
+    angel_RDI_write,
+    angel_RDI_CPUread,
+    angel_RDI_CPUwrite,
+    angel_RDI_CPread,
+    angel_RDI_CPwrite,
+    angel_RDI_setbreak,
+    angel_RDI_clearbreak,
+    angel_RDI_setwatch,
+    angel_RDI_clearwatch,
+    angel_RDI_execute,
+    angel_RDI_step,
+    angel_RDI_info,
+    angel_RDI_pointinq,
+
+    angel_RDI_AddConfig,
+    angel_RDI_LoadConfigData,
+    angel_RDI_SelectConfig,
+
+    0, /*angel_RDI_drivernames,*/
+    0,   /* cpunames */
+
+    angel_RDI_errmess,
+
+    angel_RDI_LoadAgent
+};
+
+/* EOF ardi.c */
+
+/* Not strictly necessary, but allows linking this code into armsd. */
+
+struct foo {
+    char *name;
+    int (*action)();
+    char *syntax;
+    char **helpmessage;
+    int doafterend;
+    int dobeforestart;
+    int doinmidline;
+} hostappl_CmdTable[1] = {{"", NULL}};
+
+void
+hostappl_Init()
+{
+}
+
+int
+hostappl_Backstop()
+{
+  return -30;
+}
diff --git a/gdb/rdi-share/ardi.h b/gdb/rdi-share/ardi.h
new file mode 100644
index 0000000..66acd1a
--- /dev/null
+++ b/gdb/rdi-share/ardi.h
@@ -0,0 +1,85 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ardi.h
+ * ADP RDI interfaces
+ *
+ * $Revision$
+ *     $Date$
+ */
+
+#include "host.h"
+
+typedef unsigned32 ARMword;
+
+#include "dbg_rdi.h"
+#include "dbg_conf.h"
+
+extern char *commandline;
+extern ARMword last_vector_catch;
+
+/* This is the size of buffers that are asked for by standard channels
+ * Non standard channels may wish to copy this!
+ */
+extern int Armsd_BufferSize;
+
+typedef int (*host_ChannelBufferFilledFnPtr)(unsigned int ,unsigned char ** ,void *);
+
+int angel_RDI_open(
+    unsigned type, Dbg_ConfigBlock const *config,
+    Dbg_HostosInterface const *hostif, struct Dbg_MCState *dbg_state);
+int angel_RDI_close(void);
+
+int angel_RDI_read(ARMword source, void *dest, unsigned *nbytes);
+int angel_RDI_write(const void *source, ARMword dest, unsigned *nbytes);
+
+int angel_RDI_CPUread(unsigned mode, unsigned long mask, ARMword *buffer);
+int angel_RDI_CPUwrite(unsigned mode, unsigned long mask,
+                       ARMword const *buffer);
+
+int angel_RDI_CPread(unsigned CPnum, unsigned long mask, ARMword *buffer);
+int angel_RDI_CPwrite(unsigned CPnum, unsigned long mask,
+                      ARMword const *buffer);
+
+int angel_RDI_setbreak(ARMword address, unsigned type, ARMword bound,
+                      PointHandle *handle);
+int angel_RDI_clearbreak(PointHandle handle);
+
+int angel_RDI_setwatch(ARMword address, unsigned type, unsigned datatype,
+                      ARMword bound, PointHandle *handle);
+int angel_RDI_clearwatch(PointHandle handle);
+
+int angel_RDI_pointinq(ARMword *address, unsigned type, unsigned datatype,
+                      ARMword *bound);
+
+int angel_RDI_execute(PointHandle *handle);
+
+int angel_RDI_step(unsigned ninstr, PointHandle *handle);
+
+int angel_RDI_info(unsigned type, ARMword *arg1, ARMword *arg2);
+
+int angel_RDI_AddConfig(unsigned long nbytes);
+
+int angel_RDI_LoadConfigData(unsigned long nbytes, char const *data);
+
+int angel_RDI_SelectConfig(RDI_ConfigAspect aspect, char const *name,
+                          RDI_ConfigMatchType matchtype, unsigned versionreq,
+                          unsigned *versionp);
+
+RDI_NameList const *angel_RDI_drivernames(void);
+
+int angel_RDI_LoadAgent(ARMword dest, unsigned long size, getbufferproc *getb,
+                        void *getbarg);
+
+extern const struct Dbg_HostosInterface *angel_hostif;
+
+typedef int angel_RDI_TargetStoppedProc(unsigned stopped_reason, void *arg);
+
+extern int angel_RDI_OnTargetStopping(angel_RDI_TargetStoppedProc *fn,
+                                      void *arg);
diff --git a/gdb/rdi-share/armdbg.h b/gdb/rdi-share/armdbg.h
new file mode 100644
index 0000000..b5fae11
--- /dev/null
+++ b/gdb/rdi-share/armdbg.h
@@ -0,0 +1,1452 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARM symbolic debugger toolbox interface
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+/* Minor points of uncertainty are indicated by a question mark in the
+   LH margin.
+
+   Wherever an interface is required to iterate over things of some class,
+   I prefer something of the form  EnumerateXXs(..., XXProc *p, void *arg)
+   which results in a call of p(xx, arg) for each xx, rather than something
+   of the form
+     for (xxh = StartIterationOverXXs(); (xx = Next(xxh)) != 0; ) { ... }
+     EndIterationOverXXs(xxh);
+   Others may disagree.
+   (Each XXProc returns an Error value: if this is not Err_OK, iteration
+   stops immediately and the EnumerateXXs function returns that value).
+
+   ptrace has been retired as of insufficient utility.  If such fuctionality is
+   required, it can be constructed using breakpoints.
+
+   The file form of all name fields in debug areas is in-line, with a length
+   byte and no terminator.  The debugger toolbox makes an in-store translation,
+   where the strings are out of line (the namep variant in asdfmt.h) and have a
+   terminating zero byte: the pointer is to the first character of the string
+   with the length byte at ...->n.namep[-1].
+ */
+
+#ifndef armdbg__h
+#define armdbg__h
+
+#include <stddef.h>
+
+#include "host.h"
+#include "msg.h"
+
+typedef unsigned32 ARMaddress;
+typedef unsigned32 ARMword;
+typedef unsigned16 ARMhword;
+
+#include "dbg_conf.h"
+#include "dbg_rdi.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+typedef unsigned char Dbg_Byte;
+
+typedef int Dbg_Error;
+
+typedef struct Dbg_MCState Dbg_MCState;
+/* A representation of the state of the target.  The structure is not revealed.
+   A pointer to one of these is returned by Dbg_Initialise(), is passed to all
+   toolbox calls which refer to the state of the target, and is discarded
+   by Dbg_Finalise().
+   Nothing in the toolbox itself precludes there being multiple targets, each
+   with its own state.
+ */
+
+/* Most toolbox interfaces return an error status.  Only a few of the status
+   values are expected to be interesting to clients and defined here; the
+   rest are private (but a textual form can be produced by ErrorToChars()).
+ */
+
+#define Error_OK 0
+
+/* Partitioning of the error code space: errors below Dbg_Error_Base are RDI
+   errors (as defined in dbg_rdi.h). Codes above Dbg_Error_Limit are
+   available to clients, who may impose some further structure.
+ */
+#define Dbg_Error_Base 0x1000
+#define Dbg_Error_Limit 0x2000
+
+#define DbgError(n) ((Dbg_Error)(Dbg_Error_Base+(n)))
+
+#define Dbg_Err_OK Error_OK
+#define Dbg_Err_Interrupted             DbgError(1)
+#define Dbg_Err_Overflow                DbgError(2)
+#define Dbg_Err_FileNotFound            DbgError(3)
+#define Dbg_Err_ActivationNotPresent    DbgError(4)
+#define Dbg_Err_OutOfHeap               DbgError(5)
+#define Dbg_Err_TypeNotSimple           DbgError(6)
+#define Dbg_Err_BufferFull              DbgError(7)
+#define Dbg_Err_AtStackBase             DbgError(8)
+#define Dbg_Err_AtStackTop              DbgError(9)
+#define Dbg_Err_DbgTableFormat          DbgError(10)
+#define Dbg_Err_NotVariable             DbgError(11)
+#define Dbg_Err_NoSuchBreakPoint        DbgError(12)
+#define Dbg_Err_NoSuchWatchPoint        DbgError(13)
+#define Dbg_Err_FileLineNotFound        DbgError(14)
+#define Dbg_Err_DbgTableVersion         DbgError(15)
+#define Dbg_Err_NoSuchPath              DbgError(16)
+#define Dbg_Err_StateChanged            DbgError(17)
+#define Dbg_Err_SoftInitialiseError     DbgError(18)
+#define Dbg_Err_CoProRegNotWritable     DbgError(19)
+#define Dbg_Err_NotInHistory            DbgError(20)
+#define Dbg_Err_ContextSyntax           DbgError(21)
+#define Dbg_Err_ContextNoLine           DbgError(22)
+#define Dbg_Err_ContextTwoLines         DbgError(23)
+#define Dbg_Err_VarReadOnly             DbgError(24)
+#define Dbg_Err_FileNewerThanImage      DbgError(25)
+#define Dbg_Err_NotFound                DbgError(26)
+
+   /* functions which evaluate expressions may return this value, to indicate
+      that execution became suspended within a function called in the debugee */
+
+/* Functions returning characters take a BufDesc argument, with fields buffer
+   and bufsize being input arguments describing the buffer to be filled, and
+   filled being set on return to the number of bytes written to the buffer
+   (omitting the terminating 0).
+ */
+
+typedef struct Dbg_BufDesc Dbg_BufDesc;
+
+typedef void Dbg_BufferFullProc(Dbg_BufDesc *bd);
+
+struct Dbg_BufDesc {
+    char *buffer;
+    size_t size,
+           filled;
+    Dbg_BufferFullProc *p;
+    void *arg;
+};
+
+#define Dbg_InitBufDesc(bd, buf, bytes) \
+    ((bd).buffer = (buf), (bd).size = (bytes), (bd).filled = 0,\
+     (bd).p = NULL, (bd).arg = NULL)
+
+#define Dbg_InitBufDesc_P(bd, buf, bytes, fn, a) \
+    ((bd).buffer = (buf), (bd).size = (bytes), (bd).filled = 0,\
+     (bd).p = (fn), (bd).arg = (a))
+
+Dbg_Error Dbg_StringToBuf(Dbg_BufDesc *buf, char const *s);
+Dbg_Error Dbg_BufPrintf(Dbg_BufDesc *buf, char const *form, ...);
+#ifdef NLS
+Dbg_Error Dbg_MsgToBuf(Dbg_BufDesc *buf, msg_t t);
+Dbg_Error Dbg_BufMsgPrintf(Dbg_BufDesc *buf, msg_t form, ...);
+#else
+#define Dbg_MsgToBuf Dbg_StringToBuf
+#define Dbg_BufMsgPrintf Dbg_BufPrintf
+#endif
+Dbg_Error Dbg_CharToBuf(Dbg_BufDesc *buf, int ch);
+
+int Dbg_CIStrCmp(char const *s1, char const *s2);
+/* Case-independent string comparison, interface as for strcmp */
+
+int Dbg_CIStrnCmp(char const *s1, char const *s2, size_t n);
+/* Case-independent string comparison, interface as for strncmp */
+
+void Dbg_ErrorToChars(Dbg_MCState *state, Dbg_Error err, Dbg_BufDesc *buf);
+
+typedef int Dbg_RDIResetCheckProc(int);
+/* Type of a function to be called after each RDI operation performed by the
+   toolbox, with the status from the operation as argument.  The value returned
+   is treated as the status.  (The intent is to allow the toolbox's client to
+   take special action to handle RDIDbg_Error_Reset).
+ */
+
+typedef struct Dbg_CoProDesc Dbg_CoProDesc;
+
+typedef Dbg_Error Dbg_CoProFoundProc(Dbg_MCState *state, int cpno, Dbg_CoProDesc const *cpd);
+/* Type of a function to be called when the shape of a coprocessor is discovered
+   by enquiry of the target or agent (via RequestCoProDesc)
+ */
+
+typedef struct RDIProcVec RDIProcVec;
+
+Dbg_Error Dbg_RequestReset(Dbg_MCState *);
+
+Dbg_Error Dbg_Initialise(
+    Dbg_ConfigBlock *config, Dbg_HostosInterface const *i,
+    Dbg_RDIResetCheckProc *checkreset, Dbg_CoProFoundProc *coprofound,
+    RDIProcVec const *rdi, Dbg_MCState **statep);
+/* values in config are updated if they call for default values */
+
+void Dbg_Finalise(Dbg_MCState *state, bool targetdead);
+
+typedef struct {
+    char name[16];
+    RDI_MemDescr md;
+    RDI_MemAccessStats a;
+} Dbg_MemStats;
+
+/*--------------------------------------------------------------------------*/
+
+/* Symbol table management.
+   The structure of a Dbg_SymTable is not revealed.  It is created by
+   Dbg_ReadSymbols() or by Dbg_LoadFile(), and associated with the argument
+   Dbg_MCState.
+   Many symbol tables may be concurrently active.
+   A Dbg_SymTable is removed either explicitly (by call to Dbg_DeleteSymbols)
+   or implicitly when a symbol table for an overlapping address range is read.
+
+   There is a pre-defined symbol table containing entries for ARM registers,
+   co-processor registers and the like.
+ */
+
+typedef struct Dbg_SymTable Dbg_SymTable;
+
+typedef struct Dbg_ImageFragmentDesc {
+    ARMaddress base, limit;
+} Dbg_ImageFragmentDesc;
+
+typedef enum {
+    Dbg_Lang_None,
+    Dbg_Lang_C,
+    Dbg_Lang_Pascal,
+    Dbg_Lang_Fortran,
+    Dbg_Lang_Asm,
+    Dbg_Lang_Cpp
+} Dbg_Lang;
+
+typedef struct Dbg_ImageDesc {
+    Dbg_Lang lang;
+    int executable;
+    ARMaddress robase, rolimit, rwbase, rwlimit;
+    int nfrags;
+    Dbg_ImageFragmentDesc *fragments;
+    char *name;
+} Dbg_ImageDesc;
+
+Dbg_ImageDesc *Dbg_ImageAreas(Dbg_SymTable *st);
+
+Dbg_SymTable *Dbg_LastImage(Dbg_MCState *state);
+
+Dbg_SymTable *Dbg_NewSymTable(Dbg_MCState *state, const char *name);
+
+Dbg_Error Dbg_ReadSymbols(Dbg_MCState *state, const char *filename, Dbg_SymTable **st);
+/* Just read the symbols from the named image.  <st> is set to the allocated
+   symbol table.
+?  Maybe we could usefully allow other formats than AIF images to describe
+   the symbols (eg) of shared libraries
+ */
+
+typedef struct Dbg_SymInfo {
+    int isize;
+    ARMaddress addr;
+    char *name;
+} Dbg_SymInfo;
+
+Dbg_SymInfo *Dbg_AsmSym(Dbg_SymTable *st, ARMaddress addr);
+int32 Dbg_AsmAddr(Dbg_SymTable *st, int32 line);
+int32 Dbg_AsmLine(Dbg_SymTable *st, ARMaddress addr);
+int32 Dbg_AsmLinesInRange(Dbg_SymTable *st, ARMaddress start, ARMaddress end);
+
+Dbg_Error Dbg_LoadFile(Dbg_MCState *state, const char *filename, Dbg_SymTable **st);
+/* load the image into target memory, and read its symbols.  <st> is set to
+   the allocated symbol table.
+   A null filename reloads the most recently loaded file (and rereads its
+   symbols).
+   Loading an image leaves breakpoints unchanged.  If a client wishes
+   otherwise, it must remove the breakpoints explicitly.
+*/
+
+Dbg_Error Dbg_CallGLoadFile(Dbg_MCState *state, const char *filename, Dbg_SymTable **st);
+
+typedef void Dbg_ImageLoadProc(Dbg_MCState *, Dbg_SymTable *);
+Dbg_Error Dbg_OnImageLoad(Dbg_MCState *, Dbg_ImageLoadProc *);
+/* Register function to be called back whenever an image is loaded, or symbols
+ * for an image read. (To allow multiple toolbox clients to coexist).
+ */
+
+Dbg_Error Dbg_LoadAgent(Dbg_MCState *state, const char *filename);
+/* Load a debug agent, and start it.
+   Symbols in the image for the agent are ignored.
+*/
+
+Dbg_Error Dbg_RelocateSymbols(Dbg_SymTable *st, ARMaddress reloc);
+/* add <reloc> to the value of all symbols in <st> describing absolute memory
+   locations.  The intent is to allow the symbols in a load-time relocating
+   image (for example) to be useful.
+ */
+
+Dbg_Error Dbg_DeleteSymbols(Dbg_MCState *state, Dbg_SymTable **st);
+
+typedef enum Dbg_LLSymType {
+    llst_code,
+    llst_code16,
+    llst_data,
+    llst_const,
+    llst_unknown,
+    llst_max
+} Dbg_LLSymType;
+/* Since AIF images contain no type information for low-level symbols, this
+   classification is only a guess, and some symbols describing constants will
+   incorrectly be described as code or data.
+ */
+
+typedef Dbg_Error Dbg_SymProc(
+    Dbg_MCState *state,
+    const char *symbol, Dbg_LLSymType symtype, ARMaddress value,
+    void *arg);
+
+Dbg_Error Dbg_EnumerateLowLevelSymbols(
+    Dbg_MCState *state, const char *match, Dbg_SymProc *p,
+    void *arg);
+/* Call  p(name, value)  for each low level symbol in the tables of <state>
+   whose name matches the regular expression <match> (a NULL <match> matches
+   any name).  Symbols are enumerated in no particular order.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+/* Functions are provided here to allow quick mass access to register values
+   for display.  There is no comparable need for quick mass update, so writing
+   should be via Assign().
+ */
+
+typedef struct Dbg_RegSet {
+    ARMword
+        user[15],
+        pc,
+        psr,
+        fiq[7],
+        spsr_fiq,
+        irq[2],
+        spsr_irq,
+        svc[2],
+        spsr_svc,
+        abort[2],
+        spsr_abort,
+        undef[2],
+        spsr_undef;
+} Dbg_RegSet;
+
+/* bits in the modemask argument for ReadRegisters */
+
+#define Dbg_MM_User     1
+#define Dbg_MM_FIQ      2
+#define Dbg_MM_IRQ      4
+#define Dbg_MM_SVC      8
+#define Dbg_MM_Abort 0x10
+#define Dbg_MM_Undef 0x20
+#define Dbg_MM_System 0x40
+
+Dbg_Error Dbg_ReadRegisters(Dbg_MCState *state, Dbg_RegSet *regs, int modemask);
+
+Dbg_Error Dbg_WriteRegister(Dbg_MCState *state, int rno, int modemask, ARMword val);
+
+int Dbg_StringToMode(const char *name);
+
+int Dbg_ModeToModeMask(ARMword mode);
+
+/* Some implementations of the FP instruction set keep FP values loaded into
+   registers in their unconverted format, converting only when necessary.
+   Some RDI implementations deliver these values uninterpreted.
+   (For the rest, register values will always have type F_Extended).
+ */
+
+typedef enum { F_Single, F_Double, F_Extended, F_Packed, /* fpe340 values */
+               F_Internal,                               /* new fpe : mostly as extended */
+               F_None } Dbg_FPType;
+
+typedef struct { ARMword w[3]; } Dbg_TargetExtendedVal;
+typedef struct { ARMword w[3]; } Dbg_TargetPackedVal;
+typedef struct { ARMword w[2]; } Dbg_TargetDoubleVal;
+typedef struct { ARMword w[1]; } Dbg_TargetFloatVal;
+
+typedef union { Dbg_TargetExtendedVal e; Dbg_TargetPackedVal p;
+                Dbg_TargetDoubleVal d; Dbg_TargetFloatVal f; } Dbg_TargetFPVal;
+
+#define TargetSizeof_Extended 12
+#define TargetSizeof_Packed   12
+#define TargetSizeof_Double   8
+#define TargetSizeof_Float    4
+
+typedef struct Dbg_FPRegVal {
+     Dbg_FPType type;
+     Dbg_TargetFPVal v;
+} Dbg_FPRegVal;
+
+typedef struct Dbg_FPRegSet {
+    Dbg_FPRegVal f[8];
+    ARMword fpsr, fpcr;
+} Dbg_FPRegSet;
+
+Dbg_Error Dbg_ReadFPRegisters(Dbg_MCState *state, Dbg_FPRegSet *regs);
+
+Dbg_Error Dbg_WriteFPRegisters(Dbg_MCState *state, int32 mask, Dbg_FPRegSet *regs);
+
+Dbg_Error Dbg_FPRegToDouble(DbleBin *d, Dbg_FPRegVal const *f);
+/* Converts from a FP register value (in any format) to a double with
+   approximately the same value (or returns Dbg_Err_Overflow)
+ */
+
+void Dbg_DoubleToFPReg(Dbg_FPRegVal *f, DbleBin const *d);
+/* Converts the double <d> to a Dbg_FPRegVal with type F_Extended */
+
+/*--------------------------------------------------------------------------*/
+
+#include "dbg_cp.h"
+
+Dbg_Error Dbg_DescribeCoPro(Dbg_MCState *state, int cpnum, Dbg_CoProDesc *p);
+
+Dbg_Error Dbg_DescribeCoPro_RDI(Dbg_MCState *state, int cpnum, Dbg_CoProDesc *p);
+
+Dbg_Error Dbg_ReadCPRegisters(Dbg_MCState *state, int cpnum, ARMword *regs);
+
+Dbg_Error Dbg_WriteCPRegisters(Dbg_MCState *state, int cpnum, int32 mask, ARMword *regs);
+
+/*--------------------------------------------------------------------------*/
+
+Dbg_Error Dbg_ReadWords(
+    Dbg_MCState *state,
+    ARMword *words, ARMaddress addr, unsigned count);
+/* Reads a number of (32-bit) words from target store.  The values are in host
+   byte order; if they are also to be interpreted as bytes Dbg_SwapByteOrder()
+   must be called to convert to target byte order.
+ */
+
+Dbg_Error Dbg_WriteWords(
+    Dbg_MCState *state,
+    ARMaddress addr, const ARMword *words, unsigned count);
+/* Writes a number of (32-bit) words to target store.  The values are in host
+   byte order (if what is being written is actually a byte string it must be
+   converted by Dbg_SwapByteOrder()).
+ */
+
+Dbg_Error Dbg_ReadHalf(Dbg_MCState *state, ARMhword *val, ARMaddress addr);
+Dbg_Error Dbg_WriteHalf(Dbg_MCState *state, ARMaddress addr, ARMword val);
+
+Dbg_Error Dbg_ReadBytes(Dbg_MCState *state, Dbg_Byte *val, ARMaddress addr, unsigned count);
+Dbg_Error Dbg_WriteBytes(Dbg_MCState *state, ARMaddress addr, const Dbg_Byte *val, unsigned count);
+
+void Dbg_HostWords(Dbg_MCState *state, ARMword *words, unsigned wordcount);
+/* (A noop unless host and target bytesexes differ) */
+
+ARMword Dbg_HostWord(Dbg_MCState *state, ARMword v);
+
+ARMhword Dbg_HostHalf(Dbg_MCState *state, ARMword v);
+
+/*--------------------------------------------------------------------------*/
+
+/* Types describing various aspects of position within code.
+   There are rather a lot of these, in the interests of describing precisely
+   what fields must be present (rather than having a single type with many
+   fields which may or may not be valid according to context).
+ */
+
+typedef struct Dbg_LLPos {
+    Dbg_SymTable *st;
+    char *llsym;
+    ARMaddress offset;
+} Dbg_LLPos;
+
+typedef struct Dbg_File {
+    Dbg_SymTable *st;
+    char *file;
+} Dbg_File;
+
+typedef struct Dbg_Line {
+    unsigned32 line;      /* linenumber in the file */
+    unsigned16 statement, /* within the line (1-based) */
+               charpos;   /* ditto */
+} Dbg_Line;
+/* As an output value from toolbox functions, both statement and charpos are set
+   if the version of the debugger tables for the section concerned permits.
+   On input, <charpos> is used only if <statement> is 0 (in which case, if
+   <charpos> is non-0, Dbg_Err_DbgTableVersion is returned if the version of
+   the debugger tables concerned is too early.
+ */
+
+typedef struct Dbg_FilePos {
+    Dbg_File f;
+    Dbg_Line line;
+} Dbg_FilePos;
+
+typedef struct Dbg_ProcDesc {
+    Dbg_File f;
+    char *name;
+} Dbg_ProcDesc;
+
+typedef struct Dbg_ProcPos {
+    Dbg_ProcDesc p;
+    Dbg_Line line;
+} Dbg_ProcPos;
+
+/* Support for conversions between position representations */
+
+Dbg_Error Dbg_ProcDescToLine(Dbg_MCState *state, Dbg_ProcDesc *proc, Dbg_Line *line);
+/* If proc->f.file is null (and there is just one function proc->name), it is
+   updated to point to the name of the file containing (the start of)
+   proc->name.
+ */
+
+Dbg_Error Dbg_FilePosToProc(Dbg_MCState *state, const Dbg_FilePos *pos, char **procname);
+
+/* Conversions from position representations to and from code addresses */
+
+Dbg_Error Dbg_AddressToProcPos(
+    Dbg_MCState *state, ARMaddress addr,
+    Dbg_ProcPos *pos);
+Dbg_Error Dbg_AddressToLLPos(
+    Dbg_MCState *state, ARMaddress addr,
+    Dbg_LLPos *pos, Dbg_LLSymType *res_type, int system_names);
+
+Dbg_Error Dbg_ProcPosToAddress(
+    Dbg_MCState *state, const Dbg_ProcPos *pos,
+    ARMaddress *res);
+Dbg_Error Dbg_LLPosToAddress(
+    Dbg_MCState *state, const Dbg_LLPos *pos,
+    ARMaddress *res);
+
+typedef struct {
+    ARMaddress start, end;
+} Dbg_AddressRange;
+
+typedef Dbg_Error Dbg_AddressRangeProc(void *arg, int32 first, int32 last, Dbg_AddressRange const *range);
+
+Dbg_Error Dbg_MapAddressRangesForFileRange(
+    Dbg_MCState *state,
+    Dbg_SymTable *st, const char *f, int32 first, int32 last, Dbg_AddressRangeProc *p, void *arg);
+
+typedef struct Dbg_Environment Dbg_Environment;
+/* A Dbg_Environment describes the context required to make sense of a variable
+   name and access its value.  Its format is not revealed.  Dbg_Environment
+   values are allocated by Dbg_NewEnvironment() and discarded by
+   Dbg_DeleteEnvironment().
+ */
+
+Dbg_Environment *Dbg_NewEnvironment(Dbg_MCState *state);
+void Dbg_DeleteEnvironment(Dbg_MCState *state, Dbg_Environment *env);
+
+Dbg_Error Dbg_StringToEnv(
+    Dbg_MCState *state, char *str, Dbg_Environment *resenv,
+    int forcontext, Dbg_Environment const *curenv);
+
+Dbg_Error Dbg_ProcPosToEnvironment(
+    Dbg_MCState *state, const Dbg_ProcPos *pos, int activation,
+    const Dbg_Environment *current, Dbg_Environment *res);
+
+/* Conversion from a position representation to an Dbg_Environment (as required
+   to access variable values).  Only a Dbg_ProcPos argument here; other
+   representations need to be converted first.
+
+   Returns <res> describing the <activation>th instance of the function
+   described by <pos>, up from the stack base if <activation> is negative,
+   else down from <current>.
+   If this function returns Dbg_Err_ActivationNotPresent, the result
+   Dbg_Environment is still valid for accessing non-auto variables.
+ */
+
+typedef struct Dbg_DeclSpec Dbg_DeclSpec;
+
+Dbg_Error Dbg_EnvToProcItem(
+    Dbg_MCState *state, Dbg_Environment const *env, Dbg_DeclSpec *proc);
+
+Dbg_Error Dbg_ContainingEnvironment(
+    Dbg_MCState *state, const Dbg_Environment *context, Dbg_Environment *res);
+/* Set <res> to describe the containing function, file if <context> is within
+   a top-level function (or error if <context> already describes a file).
+ */
+
+/*--------------------------------------------------------------------------*/
+
+/* ASD debug table pointers are not by themselves sufficient description,
+   since there's an implied section context.  Hence the DeclSpec and TypeSpec
+   structures.
+ */
+
+
+#ifndef Dbg_TypeSpec_Defined
+
+struct Dbg_DeclSpec { void *a; };
+
+#ifdef CALLABLE_COMPILER
+typedef void *Dbg_TypeSpec;
+
+/* The intention here is to give an alternative definition for Dbg_BasicType
+   which follows.
+ */
+
+#define Dbg_T_Void      xDbg_T_Void
+#define Dbg_T_Bool      xDbg_T_Bool
+#define Dbg_T_SByte     xDbg_T_SByte
+#define Dbg_T_SHalf     xDbg_T_Half
+#define Dbg_T_SWord     xDbg_T_SWord
+#define Dbg_T_UByte     xDbg_T_UByte
+#define Dbg_T_UHalf     xDbg_T_UHalf
+#define Dbg_T_UWord     xDbg_T_UWord
+#define Dbg_T_Float     xDbg_T_Float
+#define Dbg_T_Double    xDbg_T_Double
+#define Dbg_T_LDouble   xDbg_T_LDouble
+#define Dbg_T_Complex   xDbg_T_Complex
+#define Dbg_T_DComplex  xDbg_T_DComplex
+#define Dbg_T_String    xDbg_T_String
+#define Dbg_T_Function  xDbg_T_Function
+
+#define Dbg_BasicType   xDbg_BaiscType
+#define Dbg_PrimitiveTypeToTypeSpec xDbg_PrimitiveTypeToTypeSpec
+
+#else
+/* We want a Dbg_TypeSpec to be a an opaque type, but of known size (so the
+   toolbox's clients can allocate the store to hold one); unfortunately, we
+   can do this only by having one definition for the toolbox's clients and
+   one (elsewhere) for the toolbox itself.
+ */
+
+typedef struct Dbg_TypeSpec Dbg_TypeSpec;
+struct Dbg_TypeSpec { void *a; int32 b; };
+#endif /* CALLABLE_COMPILER */
+
+typedef enum {
+    Dbg_T_Void,
+
+    Dbg_T_Bool,
+
+    Dbg_T_SByte,
+    Dbg_T_SHalf,
+    Dbg_T_SWord,
+
+    Dbg_T_UByte,
+    Dbg_T_UHalf,
+    Dbg_T_UWord,
+
+    Dbg_T_Float,
+    Dbg_T_Double,
+    Dbg_T_LDouble,
+
+    Dbg_T_Complex,
+    Dbg_T_DComplex,
+
+    Dbg_T_String,
+
+    Dbg_T_Function
+} Dbg_BasicType;
+
+#endif
+
+void Dbg_PrimitiveTypeToTypeSpec(Dbg_TypeSpec *ts, Dbg_BasicType t);
+
+bool Dbg_TypeIsIntegral(Dbg_TypeSpec const *ts);
+
+bool Dbg_TypeIsPointer(Dbg_TypeSpec const *ts);
+
+bool Dbg_TypeIsFunction(Dbg_TypeSpec const *ts);
+
+bool Dbg_PruneType(Dbg_TypeSpec *tsres, Dbg_TypeSpec const *ts);
+/* Return to tsres a version of ts which has been pruned by the removal of all
+   toplevel typedefs. Result is YES if the result has changed.
+ */
+
+typedef Dbg_Error Dbg_FileProc(Dbg_MCState *state, const char *name, const Dbg_DeclSpec *procdef, void *arg);
+
+Dbg_Error Dbg_EnumerateFiles(Dbg_MCState *state, Dbg_SymTable *st, Dbg_FileProc *p, void *arg);
+/* The top level for a high level enumerate.  Lower levels are performed by
+   EnumerateDeclarations (below).
+ */
+
+typedef enum {
+    ds_Invalid,
+    ds_Type,
+    ds_Var,
+    ds_Proc,
+    ds_Enum,
+    ds_Function,
+    ds_Label
+} Dbg_DeclSort;
+
+Dbg_DeclSort Dbg_SortOfDeclSpec(Dbg_DeclSpec const *decl);
+
+char *Dbg_NameOfDeclSpec(Dbg_DeclSpec const *decl);
+
+Dbg_TypeSpec Dbg_TypeSpecOfDeclSpec(Dbg_DeclSpec const *decl);
+
+typedef enum {
+    cs_None,
+    cs_Extern,
+    cs_Static,
+    cs_Auto,
+    cs_Reg,
+    cs_Var,
+    cs_Farg,
+    cs_Fcarg,
+    cs_Local,
+    cs_Filtered,
+    cs_Globalreg
+} Dbg_StgClass;
+
+Dbg_StgClass Dbg_StgClassOfDeclSpec(Dbg_DeclSpec const *decl);
+
+bool Dbg_VarsAtSameAddress(Dbg_DeclSpec const *d1, Dbg_DeclSpec const *d2);
+
+bool Dbg_VarsDecribedForDeclSpec(Dbg_DeclSpec const *decl);
+
+int Dbg_ArgCountOfDeclSpec(Dbg_DeclSpec const *decl);
+
+typedef struct Dbg_DComplex { DbleBin r, i; } Dbg_DComplex;
+
+typedef union Dbg_ConstantVal {
+    int32 l;
+    unsigned32 u;
+    DbleBin d;
+    Dbg_DComplex fc;
+    ARMaddress a;
+    char *s;
+} Dbg_ConstantVal;
+
+typedef struct Dbg_Constant {
+    Dbg_TypeSpec type;
+    Dbg_ConstantVal val;
+} Dbg_Constant;
+
+typedef enum Dbg_ValueSort {
+    vs_register,
+    vs_store,
+    vs_constant,
+    vs_local,
+    vs_filtered,
+    vs_none,
+    vs_error
+} Dbg_ValueSort;
+
+/* vs_local allows the use of symbol table entries to describe entities within
+   the debugger's own address space, accessed in the same way as target
+   variables.
+   vs_filtered describes entities which may be read or written only via an
+   access function (eg r15)
+ */
+
+#define fpr_base 16
+/* There's only one register ValueSort (reflecting asd table StgClass);
+   fp register n is encoded as register n+fpr_base.
+ */
+
+typedef struct Dbg_Value Dbg_Value;
+
+typedef Dbg_Error Dbg_AccessFn(Dbg_MCState *state, int write, Dbg_Value *self, Dbg_Constant *c);
+/* <write> == 0: read a vs_filtered value, updating the value self.
+   <write> == 1: update a vs_filtered value, with the value described by c.
+   <self> allows use of the same Dbg_AccessFn for several different entities
+   (using different val.f.id fields).
+ */
+
+typedef Dbg_Error Dbg_FormatFn(int decode, char *b, ARMword *valp, void *formatarg);
+
+typedef struct { Dbg_AccessFn *f; int id; } Dbg_AccessFnRec;
+
+struct Dbg_Value {
+    Dbg_TypeSpec type;
+    Dbg_ValueSort sort;
+    Dbg_FormatFn *formatp;
+    void *formatarg;
+    int f77csize;
+    union {
+        struct { int no; ARMaddress frame; } r;
+        ARMaddress ptr;
+        Dbg_ConstantVal c;
+        void *localp;
+        Dbg_AccessFnRec f;
+        Dbg_Error err;
+    } val;
+};
+
+Dbg_Error Dbg_AddLLSymbol(Dbg_SymTable *st, char const *name, Dbg_LLSymType type, ARMword val);
+
+Dbg_Error Dbg_AddSymbol(Dbg_SymTable *st, char const *name, Dbg_Value const *val);
+
+typedef struct Dbg_DeclSpecF {
+  Dbg_DeclSpec decl;
+  Dbg_FormatFn *formatp;
+  void *formatarg;
+} Dbg_DeclSpecF;
+
+typedef Dbg_Error Dbg_DeclProc(Dbg_MCState *state, Dbg_Environment const *context,
+                       Dbg_DeclSpecF const *var, Dbg_DeclSort sort, int masked,
+                       void *arg);
+
+Dbg_Error Dbg_EnumerateDeclarations(Dbg_MCState *state, Dbg_Environment const *context,
+                            Dbg_DeclProc *p, void *arg);
+/* call p once for every declaration local to the function described by
+   <context> (or file if <context> describes a place outside a function).
+   p's argument <masked> is true if the variable is not visible, thanks to
+   a declaration in an inner scope.
+ */
+
+Dbg_Error Dbg_ValueOfVar(Dbg_MCState *state, const Dbg_Environment *context,
+                 const Dbg_DeclSpec *var, Dbg_Value *val);
+/* Different from Dbg_EvalExpr() in that the thing being evaluated is described
+   by a Dbg_DeclSpec (which must be for a variable), rather than a string
+   needing to be decoded and associated with a symbol-table item.  Intended to
+   be called from a Dbg_DeclProc called from Dbg_EnumerateDeclarations.
+ */
+
+Dbg_Error Dbg_EvalExpr(Dbg_MCState *state, Dbg_Environment const *context,
+               char const *expr, int flags, Dbg_Value *val);
+
+Dbg_Error Dbg_EvalExpr_ep(Dbg_MCState *state, Dbg_Environment const *context,
+                  char const *expr, char **exprend, int flags, Dbg_Value *val);
+
+/* Both Dbg_ValueOfVar and Dbg_EvalExpr mostly deliver a value still containing
+   an indirection (since it may be wanted as the lhs of an assignment)
+ */
+
+void Dbg_RealLocation(Dbg_MCState *state, Dbg_Value *val);
+/* If val describes a register, this may really be a register, or a place on
+   the stack where the register's value is saved. In the latter case, val
+   is altered to describe the save place. (In all others, it remains
+   unchanged).
+ */
+
+Dbg_Error Dbg_DereferenceValue(Dbg_MCState *state, const Dbg_Value *value, Dbg_Constant *c);
+/* This fails if <value> describes a structure or array, returning
+   Dbg_Err_TypeNotSimple
+ */
+
+typedef struct Dbg_Expr Dbg_Expr;
+/* The result of parsing an expression in an environment: its structure is not
+   revealed.  (Clients may wish to parse just once an expression which may be
+   evaluated often).  In support of which, the following two functions partition
+   the work of Dbg_EvalExpr().
+ */
+
+#define Dbg_exfl_heap 1    /* allocate Expr on the heap (FreeExpr must then be
+                              called to discard it).  Otherwise, it goes in a
+                              place overwritten by the next call to ParseExpr
+                              or EvalExpr
+                            */
+#define Dbg_exfl_needassign 2
+#define Dbg_exfl_lowlevel   4
+
+int Dbg_SetInputRadix(Dbg_MCState *state, int radix);
+char *Dbg_SetDefaultIntFormat(Dbg_MCState *state, char *format);
+
+Dbg_Error Dbg_ParseExpr(
+    Dbg_MCState *state, Dbg_Environment const *env, char *string,
+    char **end, Dbg_Expr **res, int flags);
+/* Just parse the argument string, returning a pointer to a parsed expression
+   and a pointer to the first non-white space character in the input string
+   which is not part of the parsed expression. (If macro expansion has taken
+   place, the returned pointer will not be into the argument string at all,
+   rather into the expanded version of it).
+ */
+
+Dbg_Error Dbg_ParseExprCheckEnd(
+    Dbg_MCState *state, Dbg_Environment const *env, char *string,
+    Dbg_Expr **res, int flags);
+/* As Dbg_ParseExpr, but the parsed expression is required completely to fill
+   the argument string (apart possibly for trailing whitespace), and an error
+   is returned if it does not.
+ */
+
+Dbg_Error Dbg_ParsedExprToValue(
+    Dbg_MCState *state, const Dbg_Environment *env, Dbg_Expr *expr, Dbg_Value *v);
+
+Dbg_Error Dbg_ReadDecl(
+    Dbg_MCState *state, Dbg_Environment const *env, char *string,
+    Dbg_TypeSpec *p, char **varp, int flags);
+/* Read a variable declaration, returing a description of the type of the
+   variable to p, and a pointer to its name to varp.
+ */
+
+bool Dbg_IsCastToArrayType(Dbg_MCState *state, Dbg_Expr *expr);
+
+void Dbg_FreeExpr(Dbg_Expr *expr);
+
+Dbg_Error Dbg_CopyType(Dbg_TypeSpec *tdest, Dbg_TypeSpec const *tsource);
+Dbg_Error Dbg_FreeCopiedType(Dbg_TypeSpec *ts);
+
+Dbg_Error Dbg_TypeOfExpr(Dbg_MCState *state, Dbg_Expr *tree, Dbg_TypeSpec *restype);
+
+Dbg_Error Dbg_ExprToVar(const Dbg_Expr *expr, Dbg_DeclSpec *var, Dbg_Environment *env);
+
+Dbg_Error Dbg_Assign(Dbg_MCState *state, const Dbg_Value *lv, const Dbg_Value *rv);
+
+typedef enum Dbg_TypeSort {
+  ts_simple,
+  ts_union,
+  ts_struct,
+  ts_array
+} Dbg_TypeSort;
+
+Dbg_TypeSort Dbg_TypeSortOfValue(Dbg_MCState *state, const Dbg_Value *val, int *fieldcount);
+
+Dbg_Error Dbg_TypeToChars(const Dbg_TypeSpec *var, Dbg_BufDesc *buf);
+
+Dbg_Error Dbg_TypeSize(Dbg_MCState *state, const Dbg_TypeSpec *type, unsigned32 *res);
+
+typedef int Dbg_ValToChars_cb(Dbg_MCState *state, Dbg_Value *subval, const char *fieldname,
+                          Dbg_BufDesc *buf, void *arg);
+
+Dbg_Error Dbg_ValToChars(Dbg_MCState *state, Dbg_Value *val, int base,
+                 Dbg_ValToChars_cb *cb, void *arg,
+                 const char *form, Dbg_BufDesc *buf);
+/*
+   <base> is used for (any size) integer values.
+   If <val> is of an array or structure type, <cb> is called for each element,
+   with <arg> as its last parameter, and <subbuf> describing the space remaining
+   in <buf>.  If <cb> returns 0, conversion ceases.
+ */
+
+Dbg_Error Dbg_NthElement(
+    Dbg_MCState *state,
+    const Dbg_Value *val, unsigned32 n, char **fieldname, Dbg_Value *subval);
+
+typedef Dbg_Error Dbg_HistoryProc(void *, int, Dbg_Value *);
+
+Dbg_Error Dbg_RegisterHistoryProc(Dbg_MCState *state, Dbg_HistoryProc *p, void *arg);
+
+typedef enum {
+  ls_cpu,
+  ls_store,
+  ls_copro,
+  ls_local,
+  ls_filtered
+} Dbg_LocSort;
+
+typedef struct {
+  Dbg_LocSort sort;
+  union {
+    struct { ARMaddress addr, size; } store;
+    struct { int modemask; int r; } cpu;
+    struct { int no; int r; } cp;
+    void *localp;
+    Dbg_AccessFnRec f;
+  } loc;
+} Dbg_Loc;
+
+typedef Dbg_Error Dbg_ObjectWriteProc(Dbg_MCState *state, Dbg_Loc const *loc);
+Dbg_Error Dbg_OnObjectWrite(Dbg_MCState *state, Dbg_ObjectWriteProc *p);
+/* Register function to be called back whenever the toolbox has written to any
+ * object accessible by the debuggee (or to local variables belonging to a
+ * toolbox client). The write has already been done.
+ * (To allow multiple toolbox clients to coexist).
+ */
+
+Dbg_Error Dbg_ObjectWritten(Dbg_MCState *state, Dbg_Loc const *loc);
+
+/*--------------------------------------------------------------------------*/
+
+/* Control of target program execution.
+   Currently, only synchronous operation is provided.
+   Execution could possibly be asynchronous where the target is a seperate
+   processor, but is necessarily synchronous if the target is Armulator.
+   Unfortunately, this may require modification to the RDI implementation
+   if multitasking is required but the the host system provides it only
+   cooperatively, or if there is no system-provided way to generate SIGINT.
+ */
+
+Dbg_Error Dbg_SetCommandline(Dbg_MCState *state, const char *args);
+/* Set the argument string to the concatenation of the name of the most
+   recently loaded image and args.
+ */
+
+typedef enum Dbg_ProgramState {
+    ps_notstarted,
+    /* Normal ways of stopping */
+    ps_atbreak, ps_atwatch, ps_stepdone,
+    ps_interrupted,
+    ps_stopped,
+    /* abnormal (but unsurprising) ways of stopping */
+    ps_lostwatch,
+    ps_branchthrough0, ps_undef, ps_caughtswi, ps_prefetch,
+    ps_abort, ps_addrexcept, ps_caughtirq, ps_caughtfiq,
+    ps_error,
+    /* only as a return value from Call() */
+    ps_callfailed, ps_callreturned,
+    /* internal inconsistencies */
+    ps_broken,                  /* target has "broken" */
+    ps_unknownbreak,
+    ps_unknown
+} Dbg_ProgramState;
+
+int Dbg_IsCallLink(Dbg_MCState *state, ARMaddress pc);
+
+typedef struct {
+    Dbg_FPRegVal fpres;
+    ARMword intres;
+} Dbg_CallResults;
+
+Dbg_CallResults *Dbg_GetCallResults(Dbg_MCState *state);
+
+#define Dbg_S_STATEMENTS 0
+#define Dbg_S_INSTRUCTIONS 1
+#define Dbg_S_STEPINTOPROCS 2
+
+Dbg_Error Dbg_Step(Dbg_MCState *state, int32 stepcount, int stepby, Dbg_ProgramState *status);
+/*  <stepby> is a combination of the Dbg_S_... values above */
+
+Dbg_Error Dbg_StepOut(Dbg_MCState *state, Dbg_ProgramState *status);
+
+bool Dbg_CanGo(Dbg_MCState *state);
+
+bool Dbg_IsExecuting(Dbg_MCState *state);
+
+Dbg_Error Dbg_Go(Dbg_MCState *state, Dbg_ProgramState *status);
+
+Dbg_Error Dbg_Stop(Dbg_MCState *state);
+/* Asynchronous Stop request, for call from SIGINT handler.  On return to the
+   caller, the call of Dbg_Go, Dbg_Step or Dbg_Call which started execution
+   should return ps_interrupted.
+ */
+
+typedef void Dbg_ExecuteProc(Dbg_MCState *state, Dbg_ProgramState status);
+Dbg_Error Dbg_OnExecute(Dbg_MCState *, Dbg_ExecuteProc *);
+/* Register function to be called back whenever execution stops.
+ * (To allow multiple toolbox clients to coexist).
+ */
+
+Dbg_Error Dbg_SetReturn(Dbg_MCState *state,
+                const Dbg_Environment *context, const Dbg_Value *value);
+/* Prepare continuation by returning <value> from the function activation
+   described by <context>.  (Dbg_Go() or Dbg_Step() actually perform the
+   continuation).
+ */
+
+Dbg_Error Dbg_SetExecution(Dbg_MCState *state, Dbg_Environment *context);
+/* Set the pc in a high-level fashion */
+
+Dbg_Error Dbg_ProgramStateToChars(Dbg_MCState *state, Dbg_ProgramState event, Dbg_BufDesc *buf);
+/* This is guaranteed to give a completely accurate description of <event> if
+   this was the value returned by the most recent call of Dbg_Go, Dbg_Step,
+   or Dbg_Call.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+Dbg_Error Dbg_CurrentEnvironment(Dbg_MCState *state, Dbg_Environment *context);
+
+Dbg_Error Dbg_PrevFrame(Dbg_MCState *state, Dbg_Environment *context);
+/* towards the base of the stack */
+
+Dbg_Error Dbg_NextFrame(Dbg_MCState *state, Dbg_Environment *context);
+/* away from the base of the stack */
+
+typedef struct Dbg_AnyPos {
+    enum { pos_source, pos_ll, pos_none } postype;
+    ARMaddress pc;
+    union {
+        Dbg_ProcPos source;
+        Dbg_LLPos ll;
+        ARMaddress none;
+    } pos;
+} Dbg_AnyPos;
+
+Dbg_Error Dbg_EnvironmentToPos(Dbg_MCState *state, const Dbg_Environment *context, Dbg_AnyPos *pos);
+/* <pos> is set to a Dbg_ProcPos if these is one corresponding to <context>
+   else a Dbg_LLPos if there is one.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+/* Source file management.
+   Pretty vestigial.  Handles source path (per loaded image),
+   and translates from line-number (as given in debugger tables) to character
+   position (as required to access files)
+ */
+
+Dbg_Error Dbg_ClearPaths(Dbg_MCState *state, Dbg_SymTable *st);
+Dbg_Error Dbg_AddPath(Dbg_MCState *state, Dbg_SymTable *st, const char *path);
+Dbg_Error Dbg_DeletePath(Dbg_MCState *state, Dbg_SymTable *st, const char *path);
+
+typedef enum {
+  Dbg_PathsCleared,
+  Dbg_PathAdded,
+  Dbg_PathDeleted
+} Dbg_PathAlteration;
+
+typedef void Dbg_PathAlteredProc(
+    Dbg_MCState *state, Dbg_SymTable *st, char const *path,
+    Dbg_PathAlteration sort);
+
+Dbg_Error Dbg_OnPathAlteration(Dbg_MCState *state, Dbg_PathAlteredProc *p);
+/* Register function to be called back whenever one of the source path
+ * modification functions above is called. (To allow multiple toolbox
+ * clients to coexist).
+ */
+
+typedef struct Dbg_FileRec Dbg_FileRec;
+typedef struct {
+  unsigned32 linecount;
+  Dbg_FileRec *handle;
+  char *fullname;
+} Dbg_FileDetails;
+
+Dbg_Error Dbg_GetFileDetails(
+    Dbg_MCState *state, const Dbg_File *fname, Dbg_FileDetails *res);
+Dbg_Error Dbg_FinishedWithFile(Dbg_MCState *state, Dbg_FileRec *handle);
+
+Dbg_Error Dbg_GetFileDetails_fr(
+    Dbg_MCState *state, Dbg_FileRec *handle, Dbg_FileDetails *res);
+/* Refresh details about the file associated with <handle> (in particular,
+ * its linecount).
+ */
+
+Dbg_Error Dbg_FileLineLength(
+    Dbg_MCState *state, Dbg_FileRec *handle, int32 lineno, int32 *len);
+/* Return to <len> the length of line <lineno> of the file associated with
+ * <handle> (without necessarily reading from the file).
+ */
+
+Dbg_Error Dbg_GetFileLine_fr(
+    Dbg_MCState *state, Dbg_FileRec *handle, int32 lineno, Dbg_BufDesc *buf);
+/* Return to <buf> the contents of line <lineno> of the file associated with
+ * <handle> (including its terminating newline).
+ */
+
+Dbg_Error Dbg_StartFileAccess(Dbg_MCState *state, Dbg_FileRec *handle);
+Dbg_Error Dbg_EndFileAccess(Dbg_MCState *state, Dbg_FileRec *handle);
+/* These two calls bracket a sequence of calls to GetFileLine. Between the
+ * calls, the toolbox is permitted to retain state allowing more rapid
+ * access to text on the file associated with <handle>.
+ */
+
+Dbg_Error Dbg_ControlSourceFileAccess(
+    Dbg_MCState *state, uint32 cachesize, bool closefiles);
+/* Control details of how the toolbox manages source files.
+ *   If <cachesize> is non-zero, the text from the most recently accessed
+ *     source files (of total size not to exceed <cachesize>) is saved in
+ *     store on first access to the file; subsequent access to the text of
+ *     the file uses this copy.
+ *   If <closefiles> is true, no stream is left attached to uncached source
+ *     files after Dbg_EndFileAccess has been closed. Otherwise, the toolbox
+ *     may retain such streams, in order to improve access.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+/* disassembly */
+
+/*
+ ? More exact control is wanted here, but that requires a more complicated
+ ? disass callback interface.
+ */
+
+typedef const char *Dbg_SWI_Decode(Dbg_MCState *state, ARMword swino);
+
+Dbg_Error Dbg_InstructionAt(Dbg_MCState *state, ARMaddress addr,
+                    int isize, ARMhword *inst, Dbg_SymTable *st,
+                    Dbg_SWI_Decode *swi_name, Dbg_BufDesc *buf, int *length);
+/* <isize> describes the form of disassembly wanted: 2 for 16-bit, 4 for 32-bit,
+ * 0 for 16- or 32-bit depending whether addr addresses 16- or 32-bit code.
+ * <inst> is a pointer to a pair of halfwords *in target byte order*
+ * Possibly only the first halfword will be consumed: the number of bytes used
+ * is returned via <length>.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+int Dbg_RDIOpen(Dbg_MCState *state, unsigned type);
+int Dbg_RDIInfo(Dbg_MCState *state, unsigned type, ARMword *arg1, ARMword *arg2);
+
+/*--------------------------------------------------------------------------*/
+
+typedef enum {
+    Dbg_Point_Toolbox,
+    Dbg_Point_RDI_Unknown,
+    Dbg_Point_RDI_SW,
+    Dbg_Point_RDI_HW
+} Dbg_PointType;
+
+/* breakpoint management
+   Associated with a breakpoint there may be any of
+     a count
+     an expression
+     a function
+   the breakpoint is activated if
+        the expression evaluates to a non-zero value (or fails to evaluate).
+     && decrementing the count reaches zero (the count is then reset to its
+        initial value).
+     && the function, called with the breakpoint address as argument, returns
+        a non-zero value.
+?  (The order here may be open to debate.  Note that the first two are in
+    the opposite order in armsd, but I think this order more rational)
+ */
+
+typedef enum Dbg_BreakPosType {
+    bt_procpos,
+    bt_procexit,
+    bt_address
+} Dbg_BreakPosType;
+
+typedef union {
+      Dbg_ProcPos procpos;
+      Dbg_ProcDesc procexit;
+      ARMaddress address;
+} Dbg_BreakPosPos;
+
+typedef struct Dbg_BreakPos {
+    Dbg_BreakPosType sort;
+    Dbg_BreakPosPos loc;
+} Dbg_BreakPos;
+
+typedef int Dbg_BPProc(Dbg_MCState *state, void *BPArg, Dbg_BreakPos *where);
+
+typedef struct Dbg_BreakStatus {
+    int index;
+    int initcount, countnow;
+    Dbg_BreakPos where;
+    char *expr;
+    Dbg_BPProc *p; void *p_arg;
+    int incomplete;
+    Dbg_PointType type;
+    ARMword hwresource;
+} Dbg_BreakStatus;
+
+Dbg_Error Dbg_StringToBreakPos(
+    Dbg_MCState *state, Dbg_Environment *env, char const *str, size_t len,
+    Dbg_BreakPos *bpos, char *b);
+
+Dbg_Error Dbg_SetBreakPoint(Dbg_MCState *state, Dbg_BreakPos *where,
+                    int count,
+                    const char *expr,
+                    Dbg_BPProc *p, void *arg);
+Dbg_Error Dbg_SetBreakPoint16(Dbg_MCState *state, Dbg_BreakPos *where,
+                    int count,
+                    const char *expr,
+                    Dbg_BPProc *p, void *arg);
+Dbg_Error Dbg_SetBreakPointNaturalSize(Dbg_MCState *state, Dbg_BreakPos *where,
+                    int count,
+                    const char *expr,
+                    Dbg_BPProc *p, void *arg);
+/* Setting a breakpoint at the same address as a previous breakpoint
+   completely removes the previous one.
+ */
+
+Dbg_Error Dbg_DeleteBreakPoint(Dbg_MCState *state, Dbg_BreakPos *where);
+
+Dbg_Error Dbg_SuspendBreakPoint(Dbg_MCState *state, Dbg_BreakPos *where);
+/* Temporarily remove the break point (until Reinstated) but leave intact
+   its associated expr, the value its count has reached, etc.
+?  The debugger toolbox itself wants this, but I'm not sure what use a client
+   could have for it.  Ditto Reinstate...
+ */
+
+Dbg_Error Dbg_ReinstateBreakPoint(Dbg_MCState *state, Dbg_BreakPos *where);
+/* Undo the effect of Dbg_SuspendBreakPoint
+ */
+
+Dbg_Error Dbg_DeleteAllBreakPoints(Dbg_MCState *state);
+
+Dbg_Error Dbg_SuspendAllBreakPoints(Dbg_MCState *state);
+
+Dbg_Error Dbg_ReinstateAllBreakPoints(Dbg_MCState *state);
+
+typedef Dbg_Error Dbg_BPEnumProc(Dbg_MCState *state, Dbg_BreakStatus *status, void *arg);
+
+Dbg_Error Dbg_EnumerateBreakPoints(Dbg_MCState *state, Dbg_BPEnumProc *p, void *arg);
+
+Dbg_Error Dbg_BreakPointStatus(Dbg_MCState *state,
+                       const Dbg_BreakPos *where, Dbg_BreakStatus *status);
+
+typedef void Dbg_BreakAlteredProc(Dbg_MCState *state, ARMaddress addr, bool set);
+Dbg_Error Dbg_OnBreak(Dbg_MCState *state, Dbg_BreakAlteredProc *p);
+/* Register function to be called back whenever a breakpoint is set or
+ * cleared. (To allow multiple toolbox clients to coexist).
+ */
+
+bool Dbg_StoppedAtBreakPoint(Dbg_MCState *state, const Dbg_BreakPos *where);
+/* Called after execution which resulted in ps_atbreak, to find out whether
+   the specified breakpoint was hit (could be >1, eg. exit break and another
+   high-level breakpoint at the same position).
+   Returns NO if specified breakpoint not found, or execution didn't stop
+   with ps_atbreak status.
+ */
+
+/*--------------------------------------------------------------------------*/
+
+typedef struct {
+  Dbg_Value val;
+  char *name;
+} Dbg_WatchPos;
+
+typedef int Dbg_WPProc(Dbg_MCState *state, void *WPArg, Dbg_WatchPos *where);
+
+typedef struct Dbg_WPStatus {
+    int index;
+    int initcount, countnow;
+    Dbg_WatchPos what, target;
+    char *expr;
+    Dbg_WPProc *p; void *p_arg;
+    Dbg_PointType type;
+    ARMword hwresource;
+    int skip;
+} Dbg_WPStatus;
+
+Dbg_Error Dbg_SetWatchPoint(
+    Dbg_MCState *state, Dbg_Environment *context, char const *watchee,
+    char const *target,
+    int count,
+    char const *expr,
+    Dbg_WPProc *p, void *arg);
+
+/* Cause a watchpoint event if the value of <watchee> changes to the value of
+   <target> (or changes at all if <target> is NULL).  <watchee> should
+   evaluate either to an L-value (when the size of the object being watched is
+   determined by its type) or to an integer constant (when the word with this
+   address is watched).
+ */
+
+Dbg_Error Dbg_DeleteWatchPoint(Dbg_MCState *state, Dbg_Environment *context, char const *watchee);
+
+
+Dbg_Error Dbg_SetWatchPoint_V(
+    Dbg_MCState *state,
+    char const *name, Dbg_Value const *val, char const *tname, Dbg_Value const *tval,
+    int count,
+    char const *expr,
+    Dbg_WPProc *p, void *arg);
+
+Dbg_Error Dbg_DeleteWatchPoint_V(Dbg_MCState *state, Dbg_Value const *val);
+
+
+Dbg_Error Dbg_DeleteAllWatchPoints(Dbg_MCState *state);
+
+typedef Dbg_Error Dbg_WPEnumProc(Dbg_MCState *state, Dbg_WPStatus const *watchee, void *arg);
+
+Dbg_Error Dbg_EnumerateWatchPoints(Dbg_MCState *state, Dbg_WPEnumProc *p, void *arg);
+
+Dbg_Error Dbg_WatchPointStatus(Dbg_MCState *state,
+                       Dbg_WatchPos const *where, Dbg_WPStatus *status);
+
+typedef void Dbg_WPRemovedProc(void *arg, Dbg_WPStatus const *wp);
+Dbg_Error Dbg_RegisterWPRemovalProc(Dbg_MCState *state, Dbg_WPRemovedProc *p, void *arg);
+/* When a watchpoint goes out of scope it is removed by the toolbox, and the
+   function registered here gets called back to adjust its view
+ */
+
+typedef void Dbg_WatchAlteredProc(Dbg_MCState *state, Dbg_Value const *where, bool set);
+Dbg_Error Dbg_OnWatch(Dbg_MCState *state, Dbg_WatchAlteredProc *p);
+/* Register function to be called back whenever a watchpoint is set or
+ * cleared. (To allow multiple toolbox clients to coexist).
+ */
+
+/*--------------------------------------------------------------------------*/
+
+Dbg_Error Dbg_ProfileLoad(Dbg_MCState *state);
+
+Dbg_Error Dbg_ProfileStart(Dbg_MCState *state, ARMword interval);
+Dbg_Error Dbg_ProfileStop(Dbg_MCState *state);
+
+Dbg_Error Dbg_ProfileClear(Dbg_MCState *state);
+
+Dbg_Error Dbg_WriteProfile(Dbg_MCState *state, char const *filename,
+                           char const *toolid, char const *arg);
+
+/*--------------------------------------------------------------------------*/
+
+Dbg_Error Dbg_ConnectChannel_ToHost(Dbg_MCState *state, RDICCProc_ToHost *p, void *arg);
+Dbg_Error Dbg_ConnectChannel_FromHost(Dbg_MCState *state, RDICCProc_FromHost *p, void *arg);
+
+/*--------------------------------------------------------------------------*/
+
+/* Configuration data management */
+
+Dbg_Error Dbg_LoadConfigData(Dbg_MCState *state, char const *filename);
+
+Dbg_Error Dbg_SelectConfig(
+    Dbg_MCState *state,
+    RDI_ConfigAspect aspect, char const *name, RDI_ConfigMatchType matchtype,
+    unsigned versionreq, unsigned *versionp);
+
+Dbg_Error Dbg_ParseConfigVersion(
+    char const *s, RDI_ConfigMatchType *matchp, unsigned *versionp);
+
+typedef Dbg_Error Dbg_ConfigEnumProc(Dbg_MCState *state, RDI_ConfigDesc const *desc, void *arg);
+
+Dbg_Error Dbg_EnumerateConfigs(Dbg_MCState *state, Dbg_ConfigEnumProc *p, void *arg);
+
+/*--------------------------------------------------------------------------*/
+
+/* Angel OS support */
+
+Dbg_Error Dbg_CreateTask(Dbg_MCState **statep, Dbg_MCState *parent, bool inherit);
+/* This is called when a task is to be debugged which has not been debugged
+   before - ie. there is no existing Dbg_MCState for this task. It
+   initialises a new Dbg_MCState and returns a pointer to it.
+   <parent> is any valid previously-created MCCState. If <inherit> is TRUE,
+   the new MCState inherits certain features from it (eg. symbols).
+   Otherwise, only features which are the same across all tasks are inherited,
+   (eg. global breakpoints).
+ */
+
+Dbg_Error Dbg_DeleteTask(Dbg_MCState *state);
+/* This is called when a task dies, and frees up everything which relates to that
+   task which is controlled by armdbg.
+ */
+
+Dbg_Error Dbg_DetachTask(Dbg_MCState *state);
+
+Dbg_Error Dbg_AttachTask(Dbg_MCState *state);
+/* These are called to request a switch of the current task.  First
+   Dbg_DetachTask should be called with the state of the old task.
+   Dbg_DetachTask will ensure that any cached state held by armdbg for
+   the old task is immediately written out to the target.
+
+   After Dbg_DetachTask is called and before Dbg_AttachTask is called
+   the OS channel manager should tell the target that any future
+   requests from the debugger will be fore the new task.
+
+   If the new task does not have an armdbg state structure
+   already, then Dbg_CreateTask should be called to create one (see
+   above).  Then Dbg_AttachTask is called to tell armdbg to treat the
+   new armdbg state as the current task.
+ */
+
+typedef Dbg_Error Dbg_TaskSwitchProc(void *arg, Dbg_MCState *newstate);
+
+Dbg_Error Dbg_OnTaskSwitch(Dbg_MCState *state, Dbg_TaskSwitchProc *fn, void *arg);
+/* The front end may register a callback which gets called by armdbg whenever
+   Dbg_AttachTask is called.  This callback tells the front end the new current
+   Dbg_MCState it should use to call armdbg.
+   [Note that this is only useful if there is one front end shared between all
+    tasks rather than one front end per task]
+   The value of <arg> passed to Dbg_OnTaskSwitch is passed to <fn>
+   when it is called.
+ */
+
+typedef Dbg_Error Dbg_RestartProc(
+    void *arg, Dbg_MCState *curstate, Dbg_MCState **newstate);
+
+Dbg_Error Dbg_OnRestart(Dbg_MCState *state, Dbg_RestartProc *fn, void *arg);
+/* This is used by the OS channels layer to register a callback which
+   will be made by the debugger toolbox early in the process of resuming
+   execution.
+
+   This callback must determine which task will be resumed when the target
+   restarts execution.  If this is not already the current task then it must
+   call Dbg_DetachTask and Dbg_AttachTask as decribed above to switch to the
+   task about to be resumed and return the state for the new task in
+   <newstate>.
+
+   This will ensure that armdbg updates the correct task on execution as well
+   as ensuring that stepping over a breakpointed instruction on restarting
+   happens correctly.
+
+   The value of <arg> passed to Dbg_OnRestart is passed to <fn>
+   when it is called.
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/* End of armdbg.h */
diff --git a/gdb/rdi-share/buffers.h b/gdb/rdi-share/buffers.h
new file mode 100644
index 0000000..78549de
--- /dev/null
+++ b/gdb/rdi-share/buffers.h
@@ -0,0 +1,111 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Public interface to buffer management
+ */
+
+#ifndef angel_buffers_h
+#define angel_buffers_h
+
+#include "chandefs.h"           /* CHAN_HEADER_SIZE */
+
+
+/* the handle to a buffer */
+typedef unsigned char *p_Buffer;
+
+
+/*
+ * Angel Packets are structured as a fixed size header, followed
+ * by the packet data
+ */
+#ifdef TARGET
+# define BUFFERDATA(b)  (b)     /* channels layer takes care of it */
+#else
+# define BUFFERDATA(b)  (&((b)[CHAN_HEADER_SIZE]))
+#endif
+
+
+/*
+ * The buffer management function prototypes are only applicable
+ * when compiling target code
+ */
+#ifdef TARGET
+
+/*
+ * Function: Angel_BufferQuerySizes
+ *  Purpose: Request infomation on the default and maximum buffer sizes
+ *           that can be allocated
+ *
+ *   Params:
+ *             In/Out: default_size, max_size: pointers to place the
+ *                     sizes in on return
+ */
+
+void Angel_BufferQuerySizes(unsigned int *default_size, 
+                            unsigned int *max_size );
+
+/*
+ * Function: Angel_RxEnginBuffersLeft
+ *  Purpose: return the number of free buffers 
+ *
+ *   Params:
+ *            Returns: number of free buffers
+ */
+unsigned int Angel_BuffersLeft( void );
+
+/*
+ * Function: Angel_BufferAlloc
+ *  Purpose: allocate a buffer that is at least req_size bytes long 
+ *
+ *   Params:
+ *              Input: req_size     the required size of the buffer
+ *
+ *              Returns: pointer to the buffer NULL if unable to 
+ *                       fulfil the request
+ */
+p_Buffer     Angel_BufferAlloc(unsigned int  req_size);
+
+/*
+ * Function: Angel_BufferRelease
+ *  Purpose: release a buffer back to the free pool
+ *
+ *   Params:
+ *              Input: pointer to the buffer to free
+ */
+void Angel_BufferRelease(p_Buffer buffer);
+
+
+/* return values for angel_InitBuffers */
+typedef enum buf_init_error{
+  INIT_BUF_OK,
+  INIT_BUF_FAIL
+} buf_init_error;
+
+/*
+ * Function: Angel_InitBuffers
+ *  Purpose: Initalised and malloc the buffer pool
+ *
+ *   Params:
+ *              Returns: see above
+ */
+
+buf_init_error  Angel_InitBuffers(void);
+
+#endif /* def TARGET */
+
+#endif /* ndef angel_buffers_h */
+
+/* EOF buffers.h */
diff --git a/gdb/rdi-share/bytesex.c b/gdb/rdi-share/bytesex.c
new file mode 100644
index 0000000..0c6aaae
--- /dev/null
+++ b/gdb/rdi-share/bytesex.c
@@ -0,0 +1,57 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * bytesex.c - Code to support byte-sex independence
+ * Copyright: (C) 1991, Advanced RISC Machines Ltd., Cambridge, England.
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#include "bytesex.h"
+
+static int reversing_bytes = 0;
+
+void bytesex_reverse(yes_or_no)
+int yes_or_no;
+{ reversing_bytes = yes_or_no;
+}
+
+int bytesex_reversing()
+{
+  return reversing_bytes;
+}
+
+int32 bytesex_hostval(v)
+int32 v;
+{ /* Return v with the same endian-ness as the host */
+  /* This mess generates better ARM code than the more obvious mess */
+  /* and may eventually peephole to optimal code...                 */
+  if (reversing_bytes)
+  { unsigned32 t;
+    /* t = v ^ (v ror 16) */
+    t = v ^ ((v << 16) | (((unsigned32)v) >> 16));
+    t &= ~0xff0000;
+    /* v = v ror 8 */
+    v = (v << 24) | (((unsigned32)v) >> 8);
+    v = v ^ (t >> 8);
+  }
+  return v;
+}
+
+int32 bytesex_hostval_16(v)
+int32 v;
+{
+  if (reversing_bytes) {
+    v = ((v >> 8) & 0xff) | ((v << 8) & 0xff00);
+  }
+  return v;
+}
diff --git a/gdb/rdi-share/bytesex.h b/gdb/rdi-share/bytesex.h
new file mode 100644
index 0000000..4b53ef3
--- /dev/null
+++ b/gdb/rdi-share/bytesex.h
@@ -0,0 +1,42 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+  Title:     Code to support byte-sex independence
+  Copyright: (C) 1991, Advanced RISC Machines Ltd., Cambridge, England.
+*/
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#ifndef __bytesex_h
+#define __bytesex_h
+
+#include "host.h"
+
+void bytesex_reverse(int yes_or_no);
+/*
+ * Turn sex-reversal on or off - 0 means off, non-0 means on.
+ */
+
+int bytesex_reversing(void);
+/*
+ * Return non-0 if reversing the byte sex, else 0.
+ */
+
+int32 bytesex_hostval(int32 v);
+/*
+ * Return v or byte-reversed v, according to whether sex-reversval
+ * is on or off.
+ */
+
+int32 bytesex_hostval_16(int32 v);
+/* Return v or byte-reversed v for a 16 bit value */
+
+#endif
diff --git a/gdb/rdi-share/chandefs.h b/gdb/rdi-share/chandefs.h
new file mode 100644
index 0000000..d97f0b5
--- /dev/null
+++ b/gdb/rdi-share/chandefs.h
@@ -0,0 +1,50 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Enumeration with all supported channels
+ */
+
+#ifndef angel_chandefs_h
+#define angel_chandefs_h
+
+enum channelIDs {
+  CI_PRIVATE = 0,               /* channels protocol control messages */
+  CI_HADP,                      /* ADP, host originated */
+  CI_TADP,                      /* ADP, target originated */
+  CI_HBOOT,                     /* Boot, host originated */
+  CI_TBOOT,                     /* Boot, target originated */
+  CI_CLIB,                      /* Semihosting C library support */
+  CI_HUDBG,                     /* User debug support, host originated */
+  CI_TUDBG,                     /* User debug support, target originated */
+  CI_HTDCC,                     /* Thumb direct comms channel, host orig. */
+  CI_TTDCC,                     /* Thumb direct comms channel, target orig. */
+  CI_TLOG,                      /* Target debug/logging */
+  CI_NUM_CHANNELS
+};
+
+typedef unsigned ChannelID;
+
+
+/*
+ * Size in bytes of the channel header.
+ * This is a duplicate of XXX in chanpriv.h, but we don't want everyone
+ * to have access to all of chanpriv.h, so we'll double-check in chanpriv.h.
+ */
+#define CHAN_HEADER_SIZE (4)
+
+#endif /* ndef angel_chandefs_h */
+
+/* EOF chandefs.h */
diff --git a/gdb/rdi-share/channels.h b/gdb/rdi-share/channels.h
new file mode 100644
index 0000000..b43ebc1
--- /dev/null
+++ b/gdb/rdi-share/channels.h
@@ -0,0 +1,384 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: User interface to the channels layer
+ */
+
+#ifndef angel_channels_h
+#define angel_channels_h
+
+/*
+ * This provides the public interface to the channels layer read and write
+ * routines, and buffer management routines.
+ */
+
+/* Nested header files, if required */
+
+#include "devices.h"
+#include "chandefs.h"
+#include "adperr.h"
+
+/* General purpose constants, macros, enums, typedefs */
+
+/* use the default device */
+#define CH_DEFAULT_DEV ((DeviceID)-1)
+
+/* return codes */
+typedef enum ChanError {
+  CE_OKAY,                      /* no error */
+  CE_ABANDONED,                 /* abandoned due to device switch */
+  CE_DEV_ERROR,                 /* unexpected error from device driver */
+  CE_BUSY,                      /* channel in use */
+  CE_BUFF_ERROR,                /* unable to get buffer */
+  CE_PRIVATE                    /* start of internal error codes */
+} ChanError;
+
+
+/* Publically-accessible globals */
+
+/*
+ * The following two globals are only valid after angel_InitialiseChannels()
+ * has been called.
+ */
+
+/* the default size of a channel buffer, for global use */
+extern unsigned Angel_ChanBuffSize;
+
+/* the size of a long buffer, for global use */
+extern unsigned Angel_ChanLongSize;
+
+#ifdef TARGET
+AdpErrs send_resend_msg(DeviceID devid);
+#endif
+
+/*
+ * Function: angel_InitialiseChannels
+ *  Purpose: initialise the channels layer
+ *
+ *   Params:
+ *              Input: -
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: -
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+void angel_InitialiseChannels( void );
+
+/*
+ * Function: adp_init_seq
+ *  Purpose: initialise sequence numbers and free anyt leftover buffers
+ *
+ *   Params:
+ *              Input: -
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: - adp_ok if things went ok else an error code
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+AdpErrs adp_init_seq(void);
+
+/*
+ * Function: angel_ChannelAllocBuffer
+ *  Purpose: allocate a buffer that is at least req_size bytes long
+ *
+ *   Params:
+ *              Input: req_size        the minimum size required
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: pointer to allocated buffer, or
+ *                     NULL if unable to allocate suitable buffer
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+p_Buffer angel_ChannelAllocBuffer(unsigned req_size);
+
+
+/*
+ * Function: angel_ChannelReleaseBuffer
+ *  Purpose: release a buffer back to the free pool
+ *
+ *   Params:
+ *              Input: buffer   the buffer to release
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: -
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+void angel_ChannelReleaseBuffer(p_Buffer buffer);
+
+
+/*
+ * Function: angel_ChannelSend
+ *  Purpose: blocking send of a packet via a channel
+ *
+ *   Params:
+ *              Input: devid         Device to use, or CH_DEFAULT_DEV
+ *                     chanid        Channel to use for tx 
+ *                     buffer        Pointer to data to send
+ *                     len           Length of data to send
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Transmission completed
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_ABANDONED  Tx abandoned due to device switch
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+ChanError angel_ChannelSend(DeviceID devid, ChannelID chanid,
+                            const p_Buffer buffer, unsigned len);
+
+
+/*
+ * Function: angel_ChannelSendAsync
+ *  Purpose: asynchronous send of a packet via a channel
+ *
+ *   Params:
+ *              Input: devid         Device to use, or CH_DEFAULT_DEV
+ *                     chanid        Channel to use for tx 
+ *                     buffer        Pointer to data to send
+ *                     len           Length of data to send
+ *                     callback      Function to call on completion
+ *                     callback_data Pointer to pass to callback
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Transmission underway
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_ABANDONED  Tx abandoned due to device switch
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * register an asynchronous send on the given channel
+ * (blocks until send can be commenced)
+ */
+
+typedef void (*ChanTx_CB_Fn)(ChannelID  chanid,         /* which channel  */
+                             void      *callback_data); /* as supplied... */
+                             
+
+ChanError angel_ChannelSendAsync(          DeviceID      devid,
+                                           ChannelID     chanid,
+                                     const p_Buffer      buffer,
+                                           unsigned      len, 
+                                           ChanTx_CB_Fn  callback, 
+                                           void         *callback_data);
+
+
+/*
+ * Function: angel_ChannelRead
+ *  Purpose: blocking read of a packet from a channel
+ *
+ *   Params:
+ *              Input: devid         Device to use, or CH_DEFAULT_DEV
+ *                     chanid        Channel to use for rx
+ *             Output: buffer        The buffer, supplied and filled
+ *                     len           How many bytes there are in the buffer
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Reception successful
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_ABANDONED  Tx abandoned due to device switch
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Note that in the present version, if an asynchronous read has been
+ * registered, a blocking read will be refused with CE_BUSY.
+ */
+ChanError angel_ChannelRead(DeviceID      devid,
+                            ChannelID     chanid,
+                            p_Buffer     *buffer, 
+                            unsigned     *len);
+
+
+/*
+ * Function: angel_ChannelReadAsync
+ *  Purpose: asynchronous read of a packet via a channel
+ *
+ *   Params:
+ *              Input: devid         Device to use, or CH_DEFAULT_DEV
+ *                     chanid        Channel to wait on
+ *                     callback      Function to call on completion, or NULL
+ *                     callback_data Pointer to pass to callback
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Read request registered
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_BUSY       Someone else is using the channel
+ *                                   (in a single threaded world)
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Register an asynchronous read on the given channel.  There can only be one
+ * async. reader per channel, and blocking reads are not permitted whilst
+ * an async. reader is registered.
+ *
+ * Reader can unregister by specifying NULL as the callback function.
+ */
+
+typedef void (*ChanRx_CB_Fn)(DeviceID   devID,   /* ID of receiving device  */
+                             ChannelID  chanID,  /* ID of receiving channel */
+                             p_Buffer   buff,    /* pointer to buffer       */
+                             unsigned   len,     /* length of data          */
+                             void      *cb_data  /* callback data           */
+                             );
+
+ChanError angel_ChannelReadAsync(DeviceID      devid,
+                                 ChannelID     chanid,
+                                 ChanRx_CB_Fn  callback, 
+                                 void         *callback_data);
+
+
+/*
+ * Function: angel_ChannelReadAll
+ *  Purpose: register an asynchronous read across all devices
+ *
+ *   Params:
+ *              Input: chanid        Channel to look for (usually HBOOT)
+ *                     callback      Function to call on completion
+ *                     callback_data Pointer to pass to callback
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Read request registered
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_BUSY       Someone else is reading all devices
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Register an asynchronous read across all devices.  This is a 'fallback',
+ * which will be superseded (temporarily) by a registered reader or blocking 
+ * read on a specific device.
+ */
+
+ChanError angel_ChannelReadAll(         ChannelID     chanid,
+                                        ChanRx_CB_Fn  callback,
+                                        void         *callback_data);
+
+
+
+/*
+ * Function: angel_ChannelSendThenRead
+ *  Purpose: blocking write to followed by read from a channel
+ *
+ *   Params:
+ *              Input: devid         Device to use, or CH_DEFAULT_DEV
+ *                     chanid        Channel to use for rx
+ *             In/Out: buffer        On entry:  the packet to be sent
+ *                                   On return: the packet received
+ *                     len           On entry:  length of packet to be sent
+ *                                   On return: length of packet rx'd
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Tx and Reception successful
+ *                     CE_BAD_CHAN   Channel id invalid
+ *                     CE_ABANDONED  Tx abandoned due to device switch
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Note that in the present version, if an asynchronous read has been
+ * registered, this will be refused with CE_BUSY.
+ */
+ChanError angel_ChannelSendThenRead(DeviceID      devid,
+                                    ChannelID     chanid,
+                                    p_Buffer     *buffer, 
+                                    unsigned     *len);
+
+
+/*
+ * Function: angel_ChannelSelectDevice
+ *  Purpose: select the device to be used for all channel comms
+ *
+ *   Params:
+ *              Input: device        ID of device to use as the default
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Default device selected
+ *                     CE_BAD_DEV    Invalid device ID
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: Any channel operations in progress are
+ *                     abandoned.
+ *
+ * select the device for all channels comms
+ */
+
+ChanError angel_ChannelSelectDevice(DeviceID device);
+
+
+/*
+ * Function: angel_ChannelReadActiveDevice
+ *  Purpose: reads the device id of the currently active device
+ *
+ *   Params:
+ *              Input: device        address of a DeviceID variable
+ *             Output: *device       ID of device currently being used
+ *             In/Out: -
+ *
+ *            Returns: CE_OKAY       Default device selected
+ */
+
+ChanError angel_ChannelReadActiveDevice(DeviceID *device);
+
+#endif /* ndef angel_channels_h */
+
+/* EOF channels.h */
diff --git a/gdb/rdi-share/chanpriv.h b/gdb/rdi-share/chanpriv.h
new file mode 100644
index 0000000..155e864
--- /dev/null
+++ b/gdb/rdi-share/chanpriv.h
@@ -0,0 +1,57 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Private header for channels implementations
+ */
+
+#ifndef angel_chanpriv_h
+#define angel_chanpriv_h
+
+/*
+ * This describes the internal structure and flags for a channels packet.
+ */
+
+/* byte positions within channel packet */
+#define CF_CHANNEL_BYTE_POS  0
+#define CF_HOME_SEQ_BYTE_POS 1
+#define CF_OPPO_SEQ_BYTE_POS 2
+#define CF_FLAGS_BYTE_POS    3
+#define CF_DATA_BYTE_POS     4
+
+/* flags for FLAGS field */
+#define CF_RELIABLE  (1 << 0)    /* use reliable channels protocol */
+#define CF_RESEND    (1 << 1)    /* this is a renegotiation packet */
+#define CF_HEARTBEAT (1 << 2)    /* heartbeat packet - prod target into sync */
+
+/* byte positions within buffer */
+#define CB_LINK_BYTE_POS        0   /* the link pointer */
+#define CB_CHAN_HEADER_BYTE_POS 4   /* the channel frame starts here */
+
+/* macro to get buffer position of packet component */
+#define CB_PACKET(x) (CB_CHAN_HEADER_BYTE_POS + (x))
+
+/* byte offset of packet data within buffer */
+#define CB_CHAN_DATA_BYTE_POS   (CB_PACKET(CF_DATA_BYTE_POS))
+
+/* access the link in a buffer, where b is byte pointer to buffer */
+#define CB_LINK(b) ((p_Buffer)(&(b)[0]))
+
+#define invalidChannelID(chan)  (((int)(chan)) < 0 || \
+                                 (chan) >= CI_NUM_CHANNELS)
+
+#endif /* ndef angel_chanpriv_h */
+
+/* EOF chanpriv.h */
diff --git a/gdb/rdi-share/configure b/gdb/rdi-share/configure
new file mode 100755
index 0000000..e85f4f8
--- /dev/null
+++ b/gdb/rdi-share/configure
@@ -0,0 +1,2115 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.2 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.2"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=adp.h
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:560: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:614: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "$*" != "X $srcdir/configure conftestfile" \
+      && test "$*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      { echo "configure: error: ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+   fi
+
+   test "$2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:671: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+PACKAGE=rdi-share
+
+VERSION=1.0
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:717: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+   ACLOCAL=aclocal
+   echo "$ac_t""found" 1>&6
+else
+   ACLOCAL="$missing_dir/missing aclocal"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:730: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+   AUTOCONF=autoconf
+   echo "$ac_t""found" 1>&6
+else
+   AUTOCONF="$missing_dir/missing autoconf"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:743: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+   AUTOMAKE=automake
+   echo "$ac_t""found" 1>&6
+else
+   AUTOMAKE="$missing_dir/missing automake"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:756: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+   AUTOHEADER=autoheader
+   echo "$ac_t""found" 1>&6
+else
+   AUTOHEADER="$missing_dir/missing autoheader"
+   echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:769: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+   MAKEINFO=makeinfo
+   echo "$ac_t""found" 1>&6
+else
+   MAKEINFO="$missing_dir/missing makeinfo"
+   echo "$ac_t""missing" 1>&6
+fi
+
+
+
+PACKAGE=rdi-share
+VERSION=1.0
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:789: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:818: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  if test -z "$CC"; then
+    case "`uname -s`" in
+    *win32* | *WIN32*)
+      # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:868: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="cl"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ ;;
+    esac
+  fi
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 909 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:913: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:933: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:938: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:966: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1009: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:1060: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1089: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1118: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 1133 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1139: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 1150 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1156: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -nologo -E"
+  cat > conftest.$ac_ext <<EOF
+#line 1167 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1173: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1198: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1203 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  ac_cv_header_stdc=yes
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1228 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "memchr" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1246 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "free" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+  :
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1267 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:1278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  :
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+  cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+for ac_hdr in fcntl.h sys/ioctl.h sys/time.h unistd.h sys/filio.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1305: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1310 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1315: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:1343: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1348 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this.  */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this.  */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this.  */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+   It does not let you subtract one const X* pointer from another in an arm
+   of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this.  */
+  char *t;
+  char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+  *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+  int x[] = {25, 17};
+  const int *foo = &x[0];
+  ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+  typedef const int *iptr;
+  iptr p = 0;
+  ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+  struct s { int j; const int *ap[3]; };
+  struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+  const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:1397: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_const=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+  cat >> confdefs.h <<\EOF
+#define const 
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:1418: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1423 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_size_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
+echo "configure:1451: checking whether time.h and sys/time.h may both be included" >&5
+if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1456 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+int main() {
+struct tm *tp;
+; return 0; }
+EOF
+if { (eval echo configure:1465: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_header_time=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_time=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_time" 1>&6
+if test $ac_cv_header_time = yes; then
+  cat >> confdefs.h <<\EOF
+#define TIME_WITH_SYS_TIME 1
+EOF
+
+fi
+
+
+if test $ac_cv_prog_gcc = yes; then
+    echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6
+echo "configure:1488: checking whether ${CC-cc} needs -traditional" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    ac_pattern="Autoconf.*'x'"
+  cat > conftest.$ac_ext <<EOF
+#line 1494 "configure"
+#include "confdefs.h"
+#include <sgtty.h>
+Autoconf TIOCGETP
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "$ac_pattern" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_prog_gcc_traditional=yes
+else
+  rm -rf conftest*
+  ac_cv_prog_gcc_traditional=no
+fi
+rm -f conftest*
+
+
+  if test $ac_cv_prog_gcc_traditional = no; then
+    cat > conftest.$ac_ext <<EOF
+#line 1512 "configure"
+#include "confdefs.h"
+#include <termio.h>
+Autoconf TCGETA
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "$ac_pattern" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_prog_gcc_traditional=yes
+fi
+rm -f conftest*
+
+  fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6
+  if test $ac_cv_prog_gcc_traditional = yes; then
+    CC="$CC -traditional"
+  fi
+fi
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:1534: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1539 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:1556: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_type_signal=void
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_type_signal=int
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+echo $ac_n "checking for vprintf""... $ac_c" 1>&6
+echo "configure:1575: checking for vprintf" >&5
+if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1580 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char vprintf(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char vprintf();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_vprintf) || defined (__stub___vprintf)
+choke me
+#else
+vprintf();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_vprintf=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_vprintf=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<\EOF
+#define HAVE_VPRINTF 1
+EOF
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test "$ac_cv_func_vprintf" != yes; then
+echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
+echo "configure:1627: checking for _doprnt" >&5
+if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1632 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char _doprnt(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char _doprnt();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub__doprnt) || defined (__stub____doprnt)
+choke me
+#else
+_doprnt();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func__doprnt=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func__doprnt=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<\EOF
+#define HAVE_DOPRNT 1
+EOF
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+fi
+
+for ac_func in gettimeofday select socket strtod strtoul memcpy memmove
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1682: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1687 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:1736: checking whether to enable maintainer-specific portions of Makefiles" >&5
+    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+  echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+  if test $USE_MAINTAINER_MODE = yes; then
+    MAINT=
+  else
+    MAINT='#M#'
+  fi
+  
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:1754: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'am_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1759 "configure"
+#include "confdefs.h"
+
+int main() {
+return __CYGWIN32__;
+; return 0; }
+EOF
+if { (eval echo configure:1766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_cygwin" 1>&6
+CYGWIN=
+test "$am_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6
+echo "configure:1783: checking for Mingw32 environment" >&5
+if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1788 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:1795: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  am_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_mingw32" 1>&6
+MINGW32=
+test "$am_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1814: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=
+for file in am_c_test.*; do
+   case $file in
+    *.c) ;;
+    *.o) ;;
+    *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;;
+   esac
+done
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CC@%$CC%g
+s%@RANLIB@%$RANLIB%g
+s%@CPP@%$CPP%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/rdi-share/configure.in b/gdb/rdi-share/configure.in
new file mode 100644
index 0000000..bbda5cc
--- /dev/null
+++ b/gdb/rdi-share/configure.in
@@ -0,0 +1,36 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.12.1)
+AC_INIT(adp.h)
+
+AM_INIT_AUTOMAKE(rdi-share, 1.0)
+
+PACKAGE=rdi-share
+VERSION=1.0
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+AC_PROG_RANLIB
+
+dnl Checks for libraries.
+
+dnl Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS(fcntl.h sys/ioctl.h sys/time.h unistd.h sys/filio.h)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_SIZE_T
+AC_HEADER_TIME
+
+dnl Checks for library functions.
+AC_PROG_GCC_TRADITIONAL
+AC_TYPE_SIGNAL
+AC_FUNC_VPRINTF
+AC_CHECK_FUNCS(gettimeofday select socket strtod strtoul memcpy memmove)
+
+AM_MAINTAINER_MODE
+AM_EXEEXT
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/rdi-share/crc.c b/gdb/rdi-share/crc.c
new file mode 100644
index 0000000..cfa6522
--- /dev/null
+++ b/gdb/rdi-share/crc.c
@@ -0,0 +1,257 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * crc.c - provides some "standard" CRC calculation routines.
+ *
+ */
+#include "crc.h"    /* describes this code */
+
+/**********************************************************************/
+
+/*
+ * crc32                                                IEEE-802.3 32bit CRC
+ * -----                                                --------------------
+ */
+
+/* This table was generated by the "crctable" program */
+static const unsigned int crc32table[256] = {
+                   /* 0x00 */ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
+                   /* 0x04 */ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
+                   /* 0x08 */ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+                   /* 0x0C */ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
+                   /* 0x10 */ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
+                   /* 0x14 */ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+                   /* 0x18 */ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
+                   /* 0x1C */ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
+                   /* 0x20 */ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+                   /* 0x24 */ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
+                   /* 0x28 */ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
+                   /* 0x2C */ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+                   /* 0x30 */ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
+                   /* 0x34 */ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
+                   /* 0x38 */ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+                   /* 0x3C */ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
+                   /* 0x40 */ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
+                   /* 0x44 */ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+                   /* 0x48 */ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
+                   /* 0x4C */ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
+                   /* 0x50 */ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+                   /* 0x54 */ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
+                   /* 0x58 */ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
+                   /* 0x5C */ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+                   /* 0x60 */ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
+                   /* 0x64 */ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
+                   /* 0x68 */ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+                   /* 0x6C */ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
+                   /* 0x70 */ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
+                   /* 0x74 */ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+                   /* 0x78 */ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
+                   /* 0x7C */ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
+                   /* 0x80 */ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+                   /* 0x84 */ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
+                   /* 0x88 */ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
+                   /* 0x8C */ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+                   /* 0x90 */ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
+                   /* 0x94 */ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
+                   /* 0x98 */ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+                   /* 0x9C */ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
+                   /* 0xA0 */ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
+                   /* 0xA4 */ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+                   /* 0xA8 */ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
+                   /* 0xAC */ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
+                   /* 0xB0 */ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+                   /* 0xB4 */ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
+                   /* 0xB8 */ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
+                   /* 0xBC */ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+                   /* 0xC0 */ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
+                   /* 0xC4 */ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
+                   /* 0xC8 */ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+                   /* 0xCC */ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
+                   /* 0xD0 */ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
+                   /* 0xD4 */ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+                   /* 0xD8 */ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
+                   /* 0xDC */ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
+                   /* 0xE0 */ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+                   /* 0xE4 */ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
+                   /* 0xE8 */ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
+                   /* 0xEC */ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+                   /* 0xF0 */ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
+                   /* 0xF4 */ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
+                   /* 0xF8 */ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+                   /* 0xFC */ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D,
+                                            };
+unsigned int crc32(unsigned char *address, unsigned int size, unsigned int crc)
+{
+#if 0
+  /* FAST, but bigger and only good for word-aligned data */
+  unsigned int *daddr = (unsigned int *)address;
+  unsigned int  data = FALSE; /* little-endian by default */
+
+ /*
+  * TODO: We should really get the current processor big- or
+  * little-endian state and set "data" accordingly.
+  */
+
+  /* Perform word loop to save on memory accesses */
+  if (data)
+    /* big-endian */
+    for (; (size > 0); size -= sizeof(unsigned int))
+    {
+      data = *daddr++;
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >> 24) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >> 16) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >>  8) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >>  0) & 0xFF)) & 0xFF]);
+    }
+  else
+    for (; (size > 0); size -= sizeof(unsigned int))
+    {
+      data = *daddr++;
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >>  0) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >>  8) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >> 16) & 0xFF)) & 0xFF]);
+      crc = (((crc >> 8) & 0x00FFFFFF) ^
+             crc32table[(crc ^ ((data >> 24) & 0xFF)) & 0xFF]);
+    }
+#else
+  for (; (size > 0); size--)
+    /* byte loop */
+    crc = (((crc >> 8) & 0x00FFFFFF) ^
+           crc32table[(crc ^ *address++) & 0x000000FF]);
+#endif
+
+  return(crc);
+}
+
+/**********************************************************************/
+
+/*
+ * crc16                                                     16bit CRC-CCITT
+ * -----                                                     ---------------
+ * This function provides a table driven 16bit CRC generation for byte data.
+ * This CRC is also known as the HDLC CRC.
+ */
+/*
+ * 960201 KWelton
+ *
+ *TODO: Is this correct?  The compiler predefines __arm, *not* __ARM
+ */
+#ifdef __ARM
+/*
+ * To make the code quicker on the ARM, we double the table size and
+ * use integer slots rather than short slots for the table.
+ */
+static const unsigned int crctableA[16] = {
+#else
+static const unsigned short crctableA[16] = {
+#endif
+                                             0x0000,
+                                             0x1081,
+                                             0x2102,
+                                             0x3183,
+                                             0x4204,
+                                             0x5285,
+                                             0x6306,
+                                             0x7387,
+                                             0x8408,
+                                             0x9489,
+                                             0xA50A,
+                                             0xB58B,
+                                             0xC60C,
+                                             0xD68D,
+                                             0xE70E,
+                                             0xF78F
+                                            };
+
+#ifdef __ARM
+/* See comments above */
+static const unsigned int crctableB[16] = {
+#else
+static const unsigned short crctableB[16] = {
+#endif
+                                             0x0000,
+                                             0x1189,
+                                             0x2312,
+                                             0x329B,
+                                             0x4624,
+                                             0x57AD,
+                                             0x6536,
+                                             0x74BF,
+                                             0x8C48,
+                                             0x9DC1,
+                                             0xAF5A,
+                                             0xBED3,
+                                             0xCA6C,
+                                             0xDBE5,
+                                             0xE97E,
+                                             0xF8F7
+                                            };
+
+unsigned short crc16(unsigned char *address, unsigned int size,
+                     unsigned short crc)
+{
+  for (; (size > 0); size--)
+  {
+    /* byte loop */
+    unsigned char data = *address++; /* fetch the next data byte */
+
+    data ^= crc; /* EOR data with current CRC value */
+    crc = ((crctableA[(data & 0xF0) >> 4] ^ crctableB[data & 0x0F]) ^
+           (crc >> 8));
+  }
+
+  return(crc);
+}
+
+/**********************************************************************/
+
+#if 0 /* not required at the moment */
+
+/*
+ * elf_hash
+ * --------
+ * This function is derived from the one on page 68 of chapter of the "Unix
+ * SVR4 Programmer's Guide". It is used to generate a hash-code from a
+ * symbol name.
+ */
+unsigned int elf_hash(const unsigned char *name)
+{
+  unsigned int h = 0;
+  unsigned int g;
+
+  /* NULL pointer returns a hash of zero */
+  while (name && (*name))
+  {
+    h = ((h << 4) + *name++);
+
+    if (g = (h & 0xF0000000))
+      h ^= (g >> 24);
+
+    h &= ~g;
+  }
+
+  return(h);
+}
+#endif
+
+/**********************************************************************/
+
+/* EOF crc.c */
diff --git a/gdb/rdi-share/crc.h b/gdb/rdi-share/crc.h
new file mode 100644
index 0000000..77ba23e
--- /dev/null
+++ b/gdb/rdi-share/crc.h
@@ -0,0 +1,90 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * crc.h - describes some "standard" CRC calculation routines.
+ */
+#ifndef angel_crc_h
+#define angel_crc_h
+
+/*
+ * manifests
+ */
+
+/*
+ * When using "crc32" or "crc16" these initial CRC values must be given to
+ * the respective function the first time it is called. The function can
+ * then be called with the return value from the last call of the function
+ * to generate a running CRC over multiple data blocks.
+ * When the last data block has been processed using the "crc32" algorithm
+ * the CRC value should be inverted to produce the final CRC value:
+ * e.g. CRC = ~CRC
+ */
+
+#define startCRC32  (0xFFFFFFFF)    /* CRC initialised to all 1s */
+#define startCRC16  (0x0000)        /* CRC initialised to all 0s */
+
+/*
+ * For the CRC-32 residual to be calculated correctly requires that the CRC
+ * value is in memory little-endian due to the byte read, bit-ordering
+ * nature of the algorithm.
+ */
+#define CRC32residual   (0xDEBB20E3)    /* good CRC-32 residual */
+
+
+/**********************************************************************/
+
+/*
+ * exported functions
+ */
+
+/*
+ *  Function: crc32
+ *   Purpose: Provides a table driven implementation of the IEEE-802.3
+ *            32-bit CRC algorithm for byte data.
+ *
+ *    Params:
+ *       Input: address     pointer to the byte data
+ *              size        number of bytes of data to be processed
+ *              crc         initial CRC value to be used (can be the output
+ *                          from a previous call to this function).
+ *   Returns:
+ *          OK: 32-bit CRC value for the specified data
+ */
+extern unsigned int crc32(unsigned char *address, unsigned int size,
+                          unsigned int crc);
+
+/**********************************************************************/
+
+/*
+ *
+ *  Function: crc16
+ *   Purpose: Generates a table driven 16-bit CRC-CCITT for byte data
+ *
+ *    Params:
+ *       Input: address     pointer to the byte data
+ *              size        number of bytes of data to be processed
+ *              crc         initial CRC value to be used (can be the output
+ *                          from a previous call to this function).
+ *
+ *   Returns:
+ *          OK: 16-bit CRC value for the specified data
+ */
+extern unsigned short crc16(unsigned char *address, unsigned int size,
+                            unsigned short crc);
+
+/**********************************************************************/
+
+#endif /* !defined(angel_crc_h) */
+
+/* EOF crc.h */
diff --git a/gdb/rdi-share/dbg_conf.h b/gdb/rdi-share/dbg_conf.h
new file mode 100644
index 0000000..bf79958
--- /dev/null
+++ b/gdb/rdi-share/dbg_conf.h
@@ -0,0 +1,54 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARM symbolic debugger toolbox: dbg_conf.h
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#ifndef Dbg_Conf__h
+
+#define Dbg_Conf__h
+
+typedef struct Dbg_ConfigBlock {
+    int bytesex;
+    int fpe;               /* Target should initialise FPE */
+    long memorysize;
+    unsigned long cpu_speed;/* Cpu speed (HZ) */
+    int serialport;        /*) remote connection parameters */
+    int seriallinespeed;   /*) (serial connection) */
+    int parallelport;      /*) ditto */
+    int parallellinespeed; /*) (parallel connection) */
+    char *ethernettarget;  /* name of remote ethernet target */
+    int processor;         /* processor the armulator is to emulate (eg ARM60) */
+    int rditype;           /* armulator / remote processor */
+    int heartbeat_on;  /* angel heartbeat */
+    int drivertype;        /* parallel / serial / etc */
+    char const *configtoload;
+    char const *memconfigtoload;
+    int flags;
+} Dbg_ConfigBlock;
+
+#define Dbg_ConfigFlag_Reset 1
+#define Dbg_ConfigFlag_LLSymsNeedPrefix 2
+
+typedef struct Dbg_HostosInterface Dbg_HostosInterface;
+/* This structure allows access by the (host-independent) C-library support
+   module of armulator or pisd (armos.c) to host-dependent functions for
+   which there is no host-independent interface.  Its contents are unknown
+   to the debugger toolbox.
+   The assumption is that, in a windowed system, fputc(stderr) for example
+   may not achieve the desired effect of the character appearing in some
+   window.
+ */
+
+#endif
diff --git a/gdb/rdi-share/dbg_cp.h b/gdb/rdi-share/dbg_cp.h
new file mode 100644
index 0000000..8974f83
--- /dev/null
+++ b/gdb/rdi-share/dbg_cp.h
@@ -0,0 +1,62 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARM symbolic debugger toolbox: dbg_cp.h
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#ifndef Dbg_CP__h
+
+#define Dbg_CP__h
+
+#define Dbg_Access_Readable  1
+#define Dbg_Access_Writable  2
+#define Dbg_Access_CPDT      4 /* else CPRT */
+
+typedef struct {
+    unsigned short rmin, rmax;
+    /* a single description can be used for a range of registers with
+       the same properties *accessed via CPDT instructions*
+     */
+    unsigned char nbytes;   /* size of register */
+    unsigned char access;   /* see above (Access_xxx) */
+    union {
+       struct { /* CPDT instructions do not allow the coprocessor much freedom:
+                   only bit 22 ('N') and 12-15 ('CRd') are free for the
+                   coprocessor to use as it sees fit.
+                 */
+                unsigned char nbit;
+                unsigned char rdbits;
+              } cpdt;
+       struct { /* CPRT instructions have much more latitude.  The bits fixed
+                   by the ARM are  24..31 (condition mask & opcode)
+                                   20 (direction)
+                                   8..15 (cpnum, arm register)
+                                   4 (CPRT not CPDO)
+                   leaving 14 bits free to the coprocessor (fortunately
+                   falling within two bytes).
+                 */
+                unsigned char read_b0, read_b1,
+                              write_b0, write_b1;
+              } cprt;
+    } accessinst;
+} Dbg_CoProRegDesc;
+
+struct Dbg_CoProDesc {
+    int entries;
+    Dbg_CoProRegDesc regdesc[1/* really nentries */];
+};
+
+#define Dbg_CoProDesc_Size(n) (sizeof(struct Dbg_CoProDesc) + ((n)-1)*sizeof(Dbg_CoProRegDesc))
+
+#endif
diff --git a/gdb/rdi-share/dbg_hif.h b/gdb/rdi-share/dbg_hif.h
new file mode 100644
index 0000000..5be2156
--- /dev/null
+++ b/gdb/rdi-share/dbg_hif.h
@@ -0,0 +1,56 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARM debugger toolbox : dbg_hif.c
+ * Description of the Dbg_HostosInterface structure.  This is *NOT*
+ * part of the debugger toolbox, but it is required by 2 back ends
+ * (armul & pisd) and two front ends (armsd & wdbg), so putting it
+ * in the toolbox is the only way of avoiding multiple copies.
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#ifndef dbg_hif__h
+#define dbg_hif__h
+
+#ifdef STDC_HEADERS
+#  include <stdarg.h>
+#else
+#  include <varargs.h>
+#endif
+
+typedef void Hif_DbgPrint(void *arg, const char *format, va_list ap);
+typedef void Hif_DbgPause(void *arg);
+
+typedef void Hif_WriteC(void *arg, int c);
+typedef int Hif_ReadC(void *arg);
+typedef int Hif_Write(void *arg, char const *buffer, int len);
+typedef char *Hif_GetS(void *arg, char *buffer, int len);
+
+typedef void Hif_RDIResetProc(void *arg);
+
+struct Dbg_HostosInterface {
+    Hif_DbgPrint *dbgprint;
+    Hif_DbgPause *dbgpause;
+    void *dbgarg;
+
+    Hif_WriteC *writec;
+    Hif_ReadC *readc;
+    Hif_Write *write;
+    Hif_GetS *gets;
+    void *hostosarg;
+
+    Hif_RDIResetProc *reset;
+    void *resetarg;
+};
+
+#endif
diff --git a/gdb/rdi-share/dbg_rdi.h b/gdb/rdi-share/dbg_rdi.h
new file mode 100644
index 0000000..efda7bd
--- /dev/null
+++ b/gdb/rdi-share/dbg_rdi.h
@@ -0,0 +1,511 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * ARM debugger toolbox : dbg_rdi.h
+ */
+
+/*
+ * RCS $Revision$
+ * Checkin $Date$
+ */
+
+#ifndef dbg_rdi__h
+#define dbg_rdi__h
+
+/***************************************************************************\
+*                            Other RDI values                               *
+\***************************************************************************/
+
+#define RDISex_Little           0 /* the byte sex of the debuggee       */
+#define RDISex_Big              1
+#define RDISex_DontCare         2
+
+#define RDIPoint_EQ             0 /* the different types of break/watchpoints */
+#define RDIPoint_GT             1
+#define RDIPoint_GE             2
+#define RDIPoint_LT             3
+#define RDIPoint_LE             4
+#define RDIPoint_IN             5
+#define RDIPoint_OUT            6
+#define RDIPoint_MASK           7
+
+#define RDIPoint_16Bit          16  /* 16-bit breakpoint                */
+#define RDIPoint_Conditional    32
+
+/* ORRed with point type in extended RDP break and watch messages       */
+#define RDIPoint_Inquiry        64
+#define RDIPoint_Handle         128 /* messages                         */
+
+#define RDIWatch_ByteRead       1 /* types of data accesses to watch for*/
+#define RDIWatch_HalfRead       2
+#define RDIWatch_WordRead       4
+#define RDIWatch_ByteWrite      8
+#define RDIWatch_HalfWrite      16
+#define RDIWatch_WordWrite      32
+
+#define RDIReg_R15              (1L << 15) /* mask values for CPU       */
+#define RDIReg_PC               (1L << 16)
+#define RDIReg_CPSR             (1L << 17)
+#define RDIReg_SPSR             (1L << 18)
+#define RDINumCPURegs           19
+
+#define RDINumCPRegs            10 /* current maximum                   */
+
+#define RDIMode_Curr            255
+
+/* RDI_Info subcodes */
+/* rdp in parameters are all preceded by                                */
+/*   in byte = RDP_Info, word = info subcode                            */
+/*     out parameters are all preceded by                               */
+/*   out byte = RDP_Return                                              */
+
+#define RDIInfo_Target          0
+/* rdi: out ARMword *targetflags, out ARMword *processor id             */
+/* rdp: in none, out word targetflags, word processorid, byte status    */
+/* the following bits are defined in targetflags                        */
+#  define RDITarget_LogSpeed                  0x0f
+#  define RDITarget_HW                        0x10    /* else emulator  */
+#  define RDITarget_AgentMaxLevel             0xe0
+#  define RDITarget_AgentLevelShift       5
+#  define RDITarget_DebuggerMinLevel         0x700
+#  define RDITarget_DebuggerLevelShift    8
+#  define RDITarget_CanReloadAgent           0x800
+#  define RDITarget_CanInquireLoadSize      0x1000
+#  define RDITarget_UnderstandsRDPInterrupt 0x2000
+#  define RDITarget_CanProfile              0x4000
+#  define RDITarget_Code16                  0x8000
+#  define RDITarget_HasCommsChannel        0x10000
+
+#define RDIInfo_Points          1
+/* rdi: out ARMword *pointcapabilities                                  */
+/* rdp: in none, out word pointcapabilities, byte status                */
+/* the following bits are defined in pointcapabilities                  */
+#  define RDIPointCapability_Comparison   1
+#  define RDIPointCapability_Range        2
+/* 4 to 128 are RDIWatch_xx{Read,Write} left-shifted by two */
+#  define RDIPointCapability_Mask         0x100
+#  define RDIPointCapability_ThreadBreak  0x200
+#  define RDIPointCapability_ThreadWatch  0x400
+#  define RDIPointCapability_CondBreak    0x800
+#  define RDIPointCapability_Status       0x1000 /* status enquiries available */
+
+#define RDIInfo_Step            2
+/* rdi: out ARMword *stepcapabilities                                   */
+/* rdp: in none, out word stepcapabilities, byte status                 */
+/* the following bits are defined in stepcapabilities                   */
+#  define RDIStep_Multiple      1
+#  define RDIStep_PCChange      2
+#  define RDIStep_Single        4
+
+#define RDIInfo_MMU             3
+/* rdi: out ARMword *mmuidentity                                        */
+/* rdp: in none, out word mmuidentity, byte status                      */
+
+#define RDIInfo_DownLoad        4
+/* Inquires whether configuration download and selection is available.  */
+/* rdp: in none, out byte status                                        */
+/* No argument, no return value. status == ok if available              */
+
+#define RDIInfo_SemiHosting     5
+/* Inquires whether RDISemiHosting_* RDI_Info calls are available.      */
+/* rdp: in none, out byte status                                        */
+/* No argument, no return value. status == ok if available              */
+
+#define RDIInfo_CoPro           6
+/* Inquires whether CoPro RDI_Info calls are available.                 */
+/* rdp: in none, out byte status                                        */
+/* No argument, no return value. status == ok if available              */
+
+#define RDIInfo_Icebreaker      7
+/* Inquires whether debuggee controlled by IceBreaker.                  */
+/* rdp: in none, out byte status                                        */
+/* No argument, no return value. status == ok if available              */
+
+#define RDIMemory_Access        8
+/* rdi: out RDI_MemAccessStats *p, in ARMword *handle                   */
+/* rdp: in word handle                                                  */
+/*      out word nreads, word nwrites, word sreads, word swrites,       */
+/*          word ns, word s, byte status                                */
+
+/* Get memory access information for memory block with specified handle */
+
+#define RDIMemory_Map           9
+/* rdi: in  RDI_MemDescr md[n], in ARMword *n                           */
+/* rdp: in word n, n * {                                                */
+/*           word handle, word start, word limit,                       */
+/*           byte width, byte access                                    */
+/*           word Nread_ns, word Nwrite_ns,                             */
+/*           word Sread_ns, word Swrite_ns}                             */
+/*      out byte status                                                 */
+/* Sets memory characteristics.                                         */
+
+#define RDISet_CPUSpeed         10
+/* rdi: in  ARMword *speed                                              */
+/* rdp: in word speed, out byte status                                  */
+/* Sets CPU speed (in ns)                                               */
+
+#define RDIRead_Clock           12
+/* rdi: out ARMword *ns, out ARMword *s                                 */
+/* rdp: in none, out word ns, word s, byte status                       */
+/* Reads simulated time                                                 */
+
+#define RDIInfo_Memory_Stats    13
+/* Inquires whether RDI_Info codes 8-10 are available                   */
+/* rdp: in none, out byte status                                        */
+/* No argument, no return value. status == ok if available              */
+
+/* The next two are only to be used if RDIInfo_DownLoad returned no     */
+/* error                                                                */
+#define RDIConfig_Count         14
+/* rdi: out ARMword *count                                              */
+/* rdp: out byte status, word count (if status == OK)                   */
+
+/* In addition, the next one is only to be used if RDIConfig_Count      */
+/* returned no error                                                    */
+typedef struct { unsigned32 version; char name[32]; } RDI_ConfigDesc;
+#define RDIConfig_Nth           15
+/* rdi: in ARMword *n, out RDI_ConfigDesc *                             */
+/* rdp: in word n                                                       */
+/*      out word version, byte namelen, bytes * bytelen name,           */
+/*          byte status                                                 */
+
+/* Set a front-end polling function to be used from within driver poll  */
+/* loops                                                                */
+typedef void RDI_PollProc(void *);
+typedef struct { RDI_PollProc *p; void *arg; } RDI_PollDesc;
+#define RDISet_PollProc         16
+/* rdi: in RDI_PollDesc const *from, RDI_PollDesc *to                   */
+/*      if from non-NULL, sets the polling function from it             */
+/*      if to non-NULL, returns the previous polling function to it     */
+/* No corresponding RDP operation                                       */
+
+/* Called on debugger startup to see if the target is ready to execute  */
+#define RDIInfo_CanTargetExecute 20
+/* rdi: in  void
+ *      out byte status (RDIError_NoError => Yes, Otherwise No)
+ */
+
+/* Called to set the top of target memory in an ICEman2 system
+ * This is then used by ICEman to tell the C Library via the INFOHEAP
+ * SWI where the stack should start.
+ * Note that only ICEman2 supports this call.  Other systems eg.
+ * Demon, Angel, will simply return an error, which means that setting
+ * the top of memory in this fashion is not supported.
+ */
+#define RDIInfo_SetTopMem        21
+/* rdi: in  word mem_top
+ *      out byte status (RDIError_NoError => Done, Other => Not supported
+ */
+
+/* Called before performing a loadagent to determine the endianess of
+ * the debug agent, so that images of the wrong bytesex can be
+ * complained about
+ */
+#define RDIInfo_AgentEndianess   22
+/* rdi: in void
+ *      out byte status
+ *      status should be RDIError_LittleEndian or RDIError_BigEndian
+ *      any other value indicates the target does not support this
+ *      request, so the debugger will have to make a best guess, which
+ *      probably means only allow little endian loadagenting.
+ */
+
+/* The next two are only to be used if the value returned by            */
+/* RDIInfo_Points has RDIPointCapability_Status set.                    */
+#define RDIPointStatus_Watch    0x80
+#define RDIPointStatus_Break    0x81
+/* rdi: inout ARMword * (in handle, out hwresource), out ARMword *type  */
+/* rdp: in word handle, out word hwresource, word type, byte status     */
+
+#define RDISignal_Stop          0x100
+/* Requests that the debuggee stop                                      */
+/* No arguments, no return value                                        */
+/* rdp: no reply (when the debuggee stops, there will be a reply to the */
+/*      step or execute request which started it)                       */
+
+#define RDIVector_Catch         0x180
+/* rdi: in ARMword *bitmap                                              */
+/* rdp: int word bitmap, out byte status                                */
+/* bit i in bitmap set to cause vector i to cause entry to debugger     */
+
+/* The next four are only to be used if RDIInfo_Semihosting returned    */
+/* no error                                                             */
+#define RDISemiHosting_SetState 0x181
+/* rdi: in ARMword *semihostingstate                                    */
+/* rdp: in word semihostingstate, out byte status                       */
+#define RDISemiHosting_GetState 0x182
+/* rdi: out ARMword *semihostingstate                                   */
+/* rdp: in none, out word semihostingstate, byte status                 */
+#define RDISemiHosting_SetVector 0x183
+/* rdi: in ARMword *semihostingvector                                   */
+/* rdp: in word semihostingvector, out byte status                      */
+#define RDISemiHosting_GetVector 0x184
+/* rdi: out ARMword *semihostingvector                                  */
+/* rdp: in none, out word semihostingvector, byte status                */
+
+/* The next two are only to be used if RDIInfo_Icebreaker returned      */
+/* no error                                                             */
+#define RDIIcebreaker_GetLocks  0x185
+/* rdi: out ARMword *lockedstate                                        */
+/* rdp: in none, out word lockedstate, byte status                      */
+
+#define RDIIcebreaker_SetLocks  0x186
+/* rdi: in ARMword *lockedstate                                         */
+/* rdp: in word lockedstate, out byte status                            */
+
+/* lockedstate is a bitmap of the icebreaker registers locked against   */
+/* use by IceMan (because explicitly written by the user)               */
+
+#define RDIInfo_GetLoadSize     0x187
+/* rdi: out ARMword *maxloadsize                                        */
+/* rdp: in none, out word maxloadsize, byte status                      */
+/* Inquires the maximum length of data transfer the agent is prepared   */
+/* to receive                                                           */
+/* Only usable if RDIInfo_Target returned RDITarget_CanInquireLoadSize  */
+/* rdi: out ARMword *size                                               */
+
+/* Only to be used if the value returned by RDIInfo_Target had          */
+/* RDITarget_HasCommsChannel set                                        */
+typedef void RDICCProc_ToHost(void *arg, ARMword data);
+typedef void RDICCProc_FromHost(void *arg, ARMword *data, int *valid);
+
+#define RDICommsChannel_ToHost  0x188
+/* rdi: in RDICCProc_ToHost *, in void *arg                             */
+/* rdp: in byte connect, out byte status                                */
+#define RDICommsChannel_FromHost 0x189
+/* rdi: in RDICCProc_FromHost *, in void *arg                           */
+/* rdp: in byte connect, out byte status                                */
+
+/* These 4 are only to be used if RDIInfo_Semihosting returns no error  */
+#define RDISemiHosting_SetARMSWI 0x190
+/* rdi: in ARMword ARM_SWI_number                                       */
+/* rdp: in ARMword ARM_SWI_number, out byte status                      */
+
+#define RDISemiHosting_GetARMSWI 0x191
+/* rdi: out ARMword ARM_SWI_number                                      */
+/* rdp: out ARMword ARM_SWI_number, byte status                         */
+
+#define RDISemiHosting_SetThumbSWI 0x192
+/* rdi: in ARMword Thumb_SWI_number                                     */
+/* rdp: in ARMword Thumb_SWI_number, out byte status                    */
+
+#define RDISemiHosting_GetThumbSWI 0x193
+/* rdi: out ARMword ARM_Thumb_number                                    */
+/* rdp: out ARMword ARM_Thumb_number, byte status                       */
+
+
+#define RDICycles               0x200
+/* rdi: out ARMword cycles[12]                                          */
+/* rdp: in none, out 6 words cycles, byte status                        */
+/* the rdi result represents 6 big-endian doublewords; the rdp results  */
+/* return values for the ls halves of these                             */
+#  define RDICycles_Size        48
+
+#define RDIErrorP               0x201
+/* rdi: out ARMaddress *errorp                                          */
+/* rdp: in none, out word errorp, byte status                           */
+/* Returns the error pointer associated with the last return from step  */
+/* or execute with status RDIError_Error.                               */
+
+#define RDISet_Cmdline          0x300
+/* rdi: in char *commandline (a null-terminated string)                 */
+/* No corresponding RDP operation (cmdline is sent to the agent in      */
+/* response to SWI_GetEnv)                                              */
+
+#define RDISet_RDILevel         0x301
+/* rdi: in ARMword *level                                               */
+/* rdp: in word level, out byte status                                  */
+/* Sets the RDI/RDP protocol level to be used (must lie between the     */
+/* limits returned by RDIInfo_Target).                                  */
+
+#define RDISet_Thread           0x302
+/* rdi: in ARMword *threadhandle                                        */
+/* rdp: in word threadhandle, out byte status                           */
+/* Sets the thread context for subsequent thread-sensitive operations   */
+/* (null value sets no thread)                                          */
+
+/* The next two are only to be used if RDI_read or RDI_write returned   */
+/* RDIError_LittleEndian or RDIError_BigEndian, to signify that the     */
+/* debugger has noticed.                                                */
+#define RDIInfo_AckByteSex  0x303
+/* rdi: in ARMword *sex (RDISex_Little or RDISex_Big)                   */
+
+/* The next two are only to be used if RDIInfo_CoPro returned no error  */
+#define RDIInfo_DescribeCoPro   0x400
+/* rdi: in int *cpno, Dbg_CoProDesc *cpd                                */
+/* rdp: in byte cpno,                                                   */
+/*         cpd->entries * {                                             */
+/*           byte rmin, byte rmax, byte nbytes, byte access,            */
+/*           byte cprt_r_b0, cprt_r_b1, cprt_w_b0, cprt_w_b1}           */
+/*         byte = 255                                                   */
+/*      out byte status                                                 */
+
+#define RDIInfo_RequestCoProDesc 0x401
+/* rdi: in int *cpno, out Dbg_CoProDesc *cpd                            */
+/* rpd: in byte cpno                                                    */
+/*      out nentries * {                                                */
+/*            byte rmin, byte rmax, byte nbytes, byte access,           */
+/*          }                                                           */
+/*          byte = 255, byte status                                     */
+
+#define RDIInfo_Log             0x800
+/* rdi: out ARMword *logsetting                                         */
+/* No corresponding RDP operation                                       */
+#define RDIInfo_SetLog          0x801
+/* rdi: in ARMword *logsetting                                          */
+/* No corresponding RDP operation                                       */
+
+#define RDIProfile_Stop         0x500
+/* No arguments, no return value                                        */
+/* rdp: in none, out byte status                                        */
+/* Requests that pc sampling stop                                       */
+
+#define RDIProfile_Start        0x501
+/* rdi: in ARMword *interval                                            */
+/* rdp: in word interval, out byte status                               */
+/* Requests that pc sampling start, with period <interval> usec         */
+
+#define RDIProfile_WriteMap     0x502
+/* rdi: in ARMword map[]                                                */
+/* map[0] is the length of the array, subsequent elements are sorted    */
+/* and are the base of ranges for pc sampling (so if the sampled pc     */
+/* lies between map[i] and map[i+1], count[i] is incremented).          */
+/* rdp: a number of messages, each of form:                             */
+/*        in word len, word size, word offset, <size> words map data    */
+/*        out status                                                    */
+/* len, size and offset are all word counts.                            */
+
+#define RDIProfile_ReadMap      0x503
+/* rdi: in ARMword *len, out ARMword counts[len]                        */
+/* Requests that the counts array be set to the accumulated pc sample   */
+/* counts                                                               */
+/* rdp: a number of messages, each of form:                             */
+/*        in word offset, word size                                     */
+/*        out <size> words, status                                      */
+/* len, size and offset are all word counts.                            */
+
+#define RDIProfile_ClearCounts  0x504
+/* No arguments, no return value                                        */
+/* rdp: in none, out byte status                                        */
+/* Requests that pc sample counts be set to zero                        */
+
+#define RDIInfo_RequestReset    0x900
+/* Request reset of the target environment                              */
+/* No arguments, no return value                                        */
+/* No RDP equivalent, sends an RDP reset                                */
+
+#define RDIInfo_CapabilityRequest 0x8000
+/* Request whether the interface supports the named capability. The     */
+/* capability is specified by or'ing the RDIInfo number with this, and  */
+/* sending that request                                                 */
+/* rdi: in none                                                         */
+/* rdp: in none, out byte status                                        */
+
+typedef struct {
+  ARMword len;
+  ARMword map[1];
+} RDI_ProfileMap;
+
+typedef unsigned32 PointHandle;
+typedef unsigned32 ThreadHandle;
+#define RDINoPointHandle        ((PointHandle)-1L)
+#define RDINoHandle             ((ThreadHandle)-1L)
+
+struct Dbg_ConfigBlock;
+struct Dbg_HostosInterface;
+struct Dbg_MCState;
+typedef int rdi_open_proc(unsigned type, struct Dbg_ConfigBlock const *config,
+                          struct Dbg_HostosInterface const *i,
+                          struct Dbg_MCState *dbg_state);
+typedef int rdi_close_proc(void);
+typedef int rdi_read_proc(ARMword source, void *dest, unsigned *nbytes);
+typedef int rdi_write_proc(const void *source, ARMword dest, unsigned *nbytes);
+typedef int rdi_CPUread_proc(unsigned mode, unsigned32 mask, ARMword *state);
+typedef int rdi_CPUwrite_proc(unsigned mode, unsigned32 mask, ARMword const *state);
+typedef int rdi_CPread_proc(unsigned CPnum, unsigned32 mask, ARMword *state);
+typedef int rdi_CPwrite_proc(unsigned CPnum, unsigned32 mask, ARMword const *state);
+typedef int rdi_setbreak_proc(ARMword address, unsigned type, ARMword bound,
+                              PointHandle *handle);
+typedef int rdi_clearbreak_proc(PointHandle handle);
+typedef int rdi_setwatch_proc(ARMword address, unsigned type, unsigned datatype,
+                              ARMword bound, PointHandle *handle);
+typedef int rdi_clearwatch_proc(PointHandle handle);
+typedef int rdi_execute_proc(PointHandle *handle);
+typedef int rdi_step_proc(unsigned ninstr, PointHandle *handle);
+typedef int rdi_info_proc(unsigned type, ARMword *arg1, ARMword *arg2);
+typedef int rdi_pointinq_proc(ARMword *address, unsigned type,
+                              unsigned datatype, ARMword *bound);
+
+typedef enum {
+    RDI_ConfigCPU,
+    RDI_ConfigSystem
+} RDI_ConfigAspect;
+
+typedef enum {
+    RDI_MatchAny,
+    RDI_MatchExactly,
+    RDI_MatchNoEarlier
+} RDI_ConfigMatchType;
+
+typedef int rdi_addconfig_proc(unsigned32 nbytes);
+typedef int rdi_loadconfigdata_proc(unsigned32 nbytes, char const *data);
+typedef int rdi_selectconfig_proc(RDI_ConfigAspect aspect, char const *name,
+                                  RDI_ConfigMatchType matchtype, unsigned versionreq,
+                                  unsigned *versionp);
+
+typedef char *getbufferproc(void *getbarg, unsigned32 *sizep);
+typedef int rdi_loadagentproc(ARMword dest, unsigned32 size, getbufferproc *getb, void *getbarg);
+typedef int rdi_targetisdead(void);
+
+typedef struct {
+    int itemmax;
+    char const * const *names;
+} RDI_NameList;
+
+typedef RDI_NameList const *rdi_namelistproc(void);
+
+typedef int rdi_errmessproc(char *buf, int buflen, int errnum);
+
+struct RDIProcVec {
+    char rditypename[12];
+
+    rdi_open_proc       *open;
+    rdi_close_proc      *close;
+    rdi_read_proc       *read;
+    rdi_write_proc      *write;
+    rdi_CPUread_proc    *CPUread;
+    rdi_CPUwrite_proc   *CPUwrite;
+    rdi_CPread_proc     *CPread;
+    rdi_CPwrite_proc    *CPwrite;
+    rdi_setbreak_proc   *setbreak;
+    rdi_clearbreak_proc *clearbreak;
+    rdi_setwatch_proc   *setwatch;
+    rdi_clearwatch_proc *clearwatch;
+    rdi_execute_proc    *execute;
+    rdi_step_proc       *step;
+    rdi_info_proc       *info;
+    /* V2 RDI */
+    rdi_pointinq_proc   *pointinquiry;
+
+    /* These three useable only if RDIInfo_DownLoad returns no error */
+    rdi_addconfig_proc  *addconfig;
+    rdi_loadconfigdata_proc *loadconfigdata;
+    rdi_selectconfig_proc *selectconfig;
+
+    rdi_namelistproc    *drivernames;
+    rdi_namelistproc    *cpunames;
+
+    rdi_errmessproc     *errmess;
+
+    /* Only if RDIInfo_Target returns a value with RDITarget_LoadAgent set */
+    rdi_loadagentproc   *loadagent;
+    rdi_targetisdead    *targetisdead;
+};
+
+#endif
diff --git a/gdb/rdi-share/devclnt.h b/gdb/rdi-share/devclnt.h
new file mode 100644
index 0000000..cb920f6
--- /dev/null
+++ b/gdb/rdi-share/devclnt.h
@@ -0,0 +1,260 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Public client interface to devices
+ */
+
+#ifndef angel_devclnt_h
+#define angel_devclnt_h
+
+/*
+ * This header exports the public interface to Angel-compliant device
+ * drivers.
+ *
+ * They are intended to be used solely by Angel, not by the User
+ * Application.  See devappl.h for the User Application interface to
+ * the device drivers.
+ */
+
+#include "devices.h"
+
+/* General purpose constants, macros, enums, typedefs */
+
+/*
+ * possible channels at device level
+ *
+ * XXX
+ *
+ * these are used as array indices, so be specific about their values
+ */
+typedef enum DevChanID {
+  DC_DBUG = 0,                  /* reliable debug packets
+                                 * containing SDBG, CLIB,UDBG, etc.) */
+  DC_APPL = 1,                  /* application packets */
+  DC_NUM_CHANNELS
+} DevChanID;
+
+/* Publically-accessible globals */
+/* none */
+
+/* Public functions */
+
+/*
+ * Function: angel_DeviceWrite
+ *  Purpose: The main entry point for asynchronous writes to a device.
+ *
+ *   Params:
+ *              Input: devID     index of the device to write to
+ *                     buff      data to write
+ *                     length    how much data to write
+ *                     callback  callback here when write finished
+ *                                or error
+ *                     cb_data   data to be passed to callback
+ *                     chanID    device channel to use
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: DE_OKAY     write request is underway           
+ *                     DE_NO_DEV   no such device                      
+ *                     DE_BAD_DEV  device does not support angel writes
+ *                     DE_BAD_CHAN no such device channel              
+ *                     DE_BUSY     device busy with another write      
+ *                     DE_INVAL    silly length                        
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Commence asynchronous transmission of a buffer on a device.  The
+ * callback will occur when the write completes or if there is an
+ * error.
+ *
+ * This must be called for each packet to be sent.
+ */
+
+DevError angel_DeviceWrite(DeviceID devID, p_Buffer buff,
+                           unsigned length, DevWrite_CB_Fn callback,
+                           void *cb_data, DevChanID chanID);
+
+
+/*
+ * Function: angel_DeviceRegisterRead
+ *  Purpose: The main entry point for asynchronous reads from a device.
+ *
+ *   Params:
+ *              Input: devID     index of the device to read from
+ *                     callback  callback here when read finished
+ *                                or error
+ *                     cb_data   data to be passed to callback
+ *                     get_buff  callback to be used to acquire buffer
+ *                                for incoming packets
+ *                     getb_data data to be passed to get_buff
+ *                     chanID    device channel to use
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns: DE_OKAY     read request is underway           
+ *                     DE_NO_DEV   no such device                      
+ *                     DE_BAD_DEV  device does not support angel reads
+ *                     DE_BAD_CHAN no such device channel              
+ *                     DE_BUSY     device busy with another read      
+ *                     DE_INVAL    silly length                        
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Register asynchronous packet read from a device.  The callback will
+ * occur when the read completes or if there is an error.
+ *
+ * This is persistent: the read remains registered for all incoming
+ * packets on the device channel.
+ */
+
+DevError angel_DeviceRegisterRead(DeviceID devID,
+                                  DevRead_CB_Fn callback, void *cb_data,
+                                  DevGetBuff_Fn get_buff, void *getb_data,
+                                  DevChanID chanID);
+
+
+/*
+ * Function: angel_DeviceControl
+ *  Purpose: Call a control function for a device
+ *
+ *   Params:
+ *              Input: devID     index of the device to control to
+ *                     op        operation to perform
+ *                     arg       parameter depending on op
+ *
+ *            Returns: DE_OKAY     control request is underway           
+ *                     DE_NO_DEV   no such device                      
+ *                     DE_BAD_OP   device does not support operation
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * Have a device perform a control operation.  Extra parameters vary 
+ * according to the operation requested.
+ */
+
+DevError angel_DeviceControl(DeviceID devID, DeviceControl op, void *arg);
+
+
+/*
+ * Function: angel_ReceiveMode
+ *  Purpose: enable or disable reception across all devices
+ *
+ *   Params:
+ *              Input: mode   choose enable or disable
+ *
+ * Pass the mode parameter to the receive_mode control method of each device
+ */
+
+void angel_ReceiveMode(DevRecvMode mode);
+
+
+/*
+ * Function: angel_ResetDevices
+ *  Purpose: reset all devices
+ *
+ *   Params: none
+ *
+ * Call the reset control method for each device
+ */
+
+void angel_ResetDevices(void);
+
+
+/*
+ * Function: angel_InitialiseDevices
+ *  Purpose: initialise the device driver layer
+ *
+ *   Params: none
+ *
+ * Set up the device driver layer and call the init method for each device
+ */
+
+void angel_InitialiseDevices(void);
+
+
+/*
+ * Function: angel_IsAngelDevice
+ *  Purpose: Find out if a device supports Angel packets
+ *
+ *   Params:
+ *              Input: devID     index of the device to control to
+ *
+ *            Returns: TRUE      supports Angel packets
+ *                     FALSE     raw device
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ */
+
+bool angel_IsAngelDevice(DeviceID devID);
+
+
+#if !defined(MINIMAL_ANGEL) || MINIMAL_ANGEL == 0
+
+/*
+ * Function: angel_ApplDeviceHandler
+ *  Purpose: The entry point for User Application Device Driver requests
+ *           in a full functiionality version of Angel.
+ *           It will never be called directly by the User Application,
+ *           but gets called indirectly, via the SWI handler.
+ *
+ *  Params:
+ *      Input: swi_r0    Argument to SWI indicating that 
+ *                       angel_ApplDeviceHandler was to be called.  This
+ *                       will not be used in this function, but is needed
+ *                       by the SWI handler.
+ *             arg_blk   pointer to block of arguments
+ *                       arg_blk[0] is one of
+ *                       angel_SWIreason_ApplDevice_{Read,Write,Yield}
+ *                       which indicates which angel_Device* fn is to
+ *                       be called.  arg_blk[1] - arg_blk[n] are the
+ *                       arguments to the corresponding
+ *                       angel_ApplDevice* function.
+ *             Output: -
+ *             In/Out: -
+ *
+ *            Returns:   whatever the specified angel_Device* function
+ *                       returns.
+ *
+ *      Reads globals: -
+ *   Modifies globals: -
+ *
+ * Other side effects: -
+ *
+ * This has the side effects of angel_Device{Read,Write,Yield}
+ * depending upon which is operation is specified as described above.
+ */
+
+DevError angel_ApplDeviceHandler(
+  unsigned swi_r0, unsigned *arg_blk
+);
+
+#endif /* ndef MINIMAL_ANGEL */
+
+#endif /* ndef angel_devclnt_h */
+
+/* EOF devclnt.h */
diff --git a/gdb/rdi-share/devices.h b/gdb/rdi-share/devices.h
new file mode 100644
index 0000000..eac6ee2
--- /dev/null
+++ b/gdb/rdi-share/devices.h
@@ -0,0 +1,104 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Devices header file
+ */
+
+#ifndef angel_devices_h
+#define angel_devices_h
+
+/*
+ * Provides common types for using devices, and provides access to the
+ * device table.
+ */
+
+#include "angel.h"
+#include "buffers.h"
+
+/* General purpose constants, macros, enums, typedefs */
+
+/* a non-enum holder for device IDs */
+typedef unsigned int DeviceID;
+
+/* device error codes */
+typedef enum DevError {
+  DE_OKAY,     /* no error */
+  DE_NO_DEV,   /* no such device */
+  DE_BAD_DEV,  /* device does not support angel */
+  DE_BAD_CHAN, /* no such device channel */
+  DE_BAD_OP,   /* operation not supported by this device */
+  DE_BUSY,     /* device already busy */
+  DE_INVAL,    /* length invalid */
+  DE_FAILED    /* something else went wrong */
+} DevError;
+
+/* return codes from asynchronous calls - primarily for channels' benefit */
+typedef enum DevStatus {
+  DS_DONE,                      /* operation succeeded */
+  DS_OVERFLOW,                  /* not enough buffer space */
+  DS_BAD_PACKET,                /* packet failed */
+  DS_DEV_ERROR,                 /* device error */
+  DS_INT_ERROR                  /* internal error */
+} DevStatus;
+
+/* Callback for async. writes */
+typedef void (*DevWrite_CB_Fn)(
+    void *buff,     /* pointer to data -- cast to p_Buffer  */
+    void *length,   /* how much done   -- cast to unsigned  */
+    void *status,   /* success code    -- cast to DevStatus */
+    void *cb_data   /* as supplied */
+    );
+
+/* Callback for async. reads */
+typedef void (*DevRead_CB_Fn)(
+    void *buff,     /* pointer to data -- cast to p_Buffer  */
+    void *length,   /* how much read   -- cast to unsigned  */
+    void *status,   /* success code    -- cast to DevStatus */
+    void *cb_data   /* as supplied */
+    );
+
+/* control operations */
+typedef enum DeviceControl {
+  DC_INIT,                      /* initialise device             */
+  DC_RESET,                     /* reset device                  */
+  DC_RECEIVE_MODE,              /* control reception             */
+  DC_SET_PARAMS,                /* set parameters of device      */
+#ifndef TARGET
+  DC_GET_USER_PARAMS,           /* params set by user at open    */
+  DC_GET_DEFAULT_PARAMS,        /* device default parameters     */
+  DC_RESYNC,                    /* resynchronise with new agent  */
+#endif
+  DC_PRIVATE                    /* start of private device codes */
+} DeviceControl;
+
+typedef enum DevRecvMode {
+  DR_DISABLE,
+  DR_ENABLE
+} DevRecvMode;
+
+/*
+ * callback to allow a device driver to request a buffer, to be filled
+ * with an incoming packet
+ */
+typedef p_Buffer (*DevGetBuff_Fn)(unsigned req_size, void *cb_data);
+
+
+/* Publically-accessible globals */
+/* none */
+
+#endif /* ndef angel_devices_h */
+
+/* EOF devices.h */
diff --git a/gdb/rdi-share/devsw.c b/gdb/rdi-share/devsw.c
new file mode 100644
index 0000000..7fa142b
--- /dev/null
+++ b/gdb/rdi-share/devsw.c
@@ -0,0 +1,404 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "adp.h"
+#include "hsys.h"
+#include "rxtx.h"
+#include "drivers.h"
+#include "buffers.h"
+#include "devclnt.h"
+#include "adperr.h"
+#include "devsw.h"
+#include "hostchan.h"
+#include "logging.h"
+
+/*
+ * TODO: this should be adjustable - it could be done by defining
+ *       a reason code for DevSW_Ioctl.  It could even be a
+ *       per-devicechannel parameter.
+ */
+static const unsigned int allocsize = ADP_BUFFER_MIN_SIZE;
+
+#define illegalDevChanID(type)  ((type) >= DC_NUM_CHANNELS)
+
+/**********************************************************************/
+
+/*
+ *  Function: initialise_read
+ *   Purpose: Set up a read request for another packet
+ *
+ *    Params:
+ *      In/Out: ds      State structure to be initialised
+ *
+ *   Returns:
+ *          OK: 0
+ *       Error: -1
+ */
+static int initialise_read(DevSWState *ds)
+{
+    struct data_packet *dp;
+
+    /*
+     * try to claim the structure that will
+     * eventually hold the new packet.
+     */
+    if ((ds->ds_nextreadpacket = DevSW_AllocatePacket(allocsize)) == NULL)
+        return -1;
+
+    /*
+     * Calls into the device driver use the DriverCall structure: use
+     * the buffer we have just allocated, and declare its size.  We
+     * are also obliged to clear the driver's context pointer.
+     */
+    dp = &ds->ds_activeread.dc_packet;
+    dp->buf_len = allocsize;
+    dp->data = ds->ds_nextreadpacket->pk_buffer;
+
+    ds->ds_activeread.dc_context = NULL;
+
+    return 0;
+}
+
+/*
+ *  Function: initialise_write
+ *   Purpose: Set up a write request for another packet
+ *
+ *    Params:
+ *       Input: packet  The packet to be written
+ *
+ *              type    The type of the packet
+ *
+ *      In/Out: dc      The structure to be intialised
+ *
+ *   Returns: Nothing
+ */
+static void initialise_write(DriverCall *dc, Packet *packet, DevChanID type)
+{
+    struct data_packet *dp = &dc->dc_packet;
+
+    dp->len = packet->pk_length;
+    dp->data = packet->pk_buffer;
+    dp->type = type;
+
+    /*
+     * we are required to clear the state structure for the driver
+     */
+    dc->dc_context = NULL;
+}
+
+/*
+ *  Function: enqueue_packet
+ *   Purpose: move a newly read packet onto the appropriate queue
+ *              of read packets
+ *
+ *    Params:
+ *      In/Out: ds      State structure with new packet
+ *
+ *   Returns: Nothing
+ */
+static void enqueue_packet(DevSWState *ds)
+{
+    struct data_packet *dp = &ds->ds_activeread.dc_packet;
+    Packet *packet = ds->ds_nextreadpacket;
+
+    /*
+     * transfer the length
+     */
+    packet->pk_length = dp->len;
+
+    /*
+     * take this packet out of the incoming slot
+     */
+    ds->ds_nextreadpacket = NULL;
+
+    /*
+     * try to put it on the correct input queue
+     */
+    if (illegalDevChanID(dp->type))
+    {
+        /* this shouldn't happen */
+        WARN("Illegal type for Rx packet");
+        DevSW_FreePacket(packet);
+    }
+    else
+        Adp_addToQueue(&ds->ds_readqueue[dp->type], packet);
+}
+
+/*
+ *  Function: flush_packet
+ *   Purpose: Send a packet to the device driver
+ *
+ *    Params:
+ *       Input: device  The device to be written to
+ *
+ *      In/Out: dc      Describes the packet to be sent
+ *
+ *   Returns: Nothing
+ *
+ * Post-conditions: If the whole packet was accepted by the device
+ *                      driver, then dc->dc_packet.data will be
+ *                      set to NULL.
+ */
+static void flush_packet(const DeviceDescr *device, DriverCall *dc)
+{
+    if (device->DeviceWrite(dc) > 0)
+        /*
+         * the whole packet was swallowed
+         */
+        dc->dc_packet.data = NULL;
+}
+
+/**********************************************************************/
+
+/*
+ * These are the externally visible functions.  They are documented in
+ * devsw.h
+ */
+Packet *DevSW_AllocatePacket(const unsigned int length)
+{
+    Packet *pk;
+
+    if ((pk = malloc(sizeof(*pk))) == NULL)
+    {
+        WARN("malloc failure");
+        return NULL;
+    }
+
+    if ((pk->pk_buffer = malloc(length+CHAN_HEADER_SIZE)) == NULL)
+    {
+        WARN("malloc failure");
+        free(pk);
+        return NULL;
+    }
+
+    return pk;
+}
+
+void DevSW_FreePacket(Packet *pk)
+{
+    free(pk->pk_buffer);
+    free(pk);
+}
+
+AdpErrs DevSW_Open(DeviceDescr *device, const char *name, const char *arg,
+                   const DevChanID type)
+{
+    DevSWState *ds;
+
+    /*
+     * is this the very first open call for this driver?
+     */
+    if ((ds = (DevSWState *)(device->SwitcherState)) == NULL)
+    {
+        /*
+         * yes, it is: initialise state
+         */
+        if ((ds = malloc(sizeof(*ds))) == NULL)
+            /* give up */
+            return adp_malloc_failure;
+
+        (void)memset(ds, 0, sizeof(*ds));
+        device->SwitcherState = (void *)ds;
+    }
+
+    /*
+     * check that we haven't already been opened for this type
+     */
+    if ((ds->ds_opendevchans & (1 << type)) != 0)
+        return adp_device_already_open;
+
+    /*
+     * if no opens have been done for this device, then do it now
+     */
+    if (ds->ds_opendevchans == 0)
+        if (device->DeviceOpen(name, arg) < 0)
+            return adp_device_open_failed;
+
+    /*
+     * open has finished
+     */
+    ds->ds_opendevchans |= (1 << type);
+    return adp_ok;
+}
+
+AdpErrs DevSW_Match(const DeviceDescr *device, const char *name,
+                    const char *arg)
+{
+    return (device->DeviceMatch(name, arg) == -1) ? adp_failed : adp_ok;
+}
+
+AdpErrs DevSW_Close(const DeviceDescr *device, const DevChanID type)
+{
+    DevSWState *ds = (DevSWState *)(device->SwitcherState);
+    Packet *pk;
+
+    if ((ds->ds_opendevchans & (1 << type)) == 0)
+        return adp_device_not_open;
+
+    ds->ds_opendevchans &= ~(1 << type);
+
+    /*
+     * if this is the last close for this channel, then inform the driver
+     */
+    if (ds->ds_opendevchans == 0)
+        device->DeviceClose();
+
+    /*
+     * release all packets of the appropriate type
+     */
+    for (pk = Adp_removeFromQueue(&(ds->ds_readqueue[type]));
+         pk != NULL;
+         pk = Adp_removeFromQueue(&(ds->ds_readqueue[type])))
+        DevSW_FreePacket(pk);
+
+    /* Free memory */
+    free ((char *) device->SwitcherState);
+    device->SwitcherState = 0x0;
+
+    /* that's all */
+    return adp_ok;
+}
+
+AdpErrs DevSW_Read(const DeviceDescr *device, const DevChanID type,
+                   Packet **packet, bool block)
+{
+  int read_err;
+  DevSWState *ds = device->SwitcherState;
+
+    /*
+     * To try to get information out of the device driver as
+     * quickly as possible, we try and read more packets, even
+     * if a completed packet is already available.
+     */
+
+    /*
+     * have we got a packet currently pending?
+     */
+  if (ds->ds_nextreadpacket == NULL)
+    /*
+       * no - set things up
+       */
+    if (initialise_read(ds) < 0) {
+      /*
+       * we failed to initialise the next packet, but can
+       * still return a packet that has already arrived.
+       */
+      *packet = Adp_removeFromQueue(&ds->ds_readqueue[type]); 
+      return adp_ok;
+    }
+  read_err = device->DeviceRead(&ds->ds_activeread, block);
+  switch (read_err) {
+  case 1:
+    /*
+     * driver has pulled in a complete packet, queue it up
+     */
+#ifdef RET_DEBUG
+    printf("got a complete packet\n");
+#endif
+    enqueue_packet(ds);
+    *packet = Adp_removeFromQueue(&ds->ds_readqueue[type]);
+    return adp_ok;
+  case 0:
+    /*
+     * OK, return the head of the read queue for the given type
+     */
+    /*    enqueue_packet(ds); */
+    *packet = Adp_removeFromQueue(&ds->ds_readqueue[type]);
+    return adp_ok;
+  case -1:
+#ifdef RET_DEBUG
+    printf("got a bad packet\n");
+#endif
+    /* bad packet */
+    *packet = NULL;
+    return adp_bad_packet;
+  default:
+    panic("DevSW_Read: bad read status %d", read_err);
+  }
+  return 0; /* get rid of a potential compiler warning */
+}
+
+
+AdpErrs DevSW_FlushPendingWrite(const DeviceDescr *device)
+{
+    struct DriverCall *dc;
+    struct data_packet *dp;
+
+    dc = &((DevSWState *)(device->SwitcherState))->ds_activewrite;
+    dp = &dc->dc_packet;
+
+    /*
+     * try to flush any packet that is still being written
+     */
+    if (dp->data != NULL)
+    {
+        flush_packet(device, dc);
+
+        /* see if it has gone */
+        if (dp->data != NULL)
+           return adp_write_busy;
+        else
+           return adp_ok;
+    }
+    else
+       return adp_ok;
+}
+
+
+AdpErrs DevSW_Write(const DeviceDescr *device, Packet *packet, DevChanID type)
+{
+    struct DriverCall *dc;
+    struct data_packet *dp;
+
+    dc = &((DevSWState *)(device->SwitcherState))->ds_activewrite;
+    dp = &dc->dc_packet;
+
+    if (illegalDevChanID(type))
+        return adp_illegal_args;
+
+    /*
+     * try to flush any packet that is still being written
+     */
+    if (DevSW_FlushPendingWrite(device) != adp_ok)
+       return adp_write_busy;
+
+    /*
+     * we can take this packet - set things up, then try to get rid of it
+     */
+    initialise_write(dc, packet, type);
+    flush_packet(device, dc);
+
+    return adp_ok;
+}
+
+AdpErrs DevSW_Ioctl(const DeviceDescr *device, const int opcode, void *args)
+{
+    return (device->DeviceIoctl(opcode, args) < 0) ? adp_failed : adp_ok;
+}
+
+bool DevSW_WriteFinished(const DeviceDescr *device)
+{
+    struct DriverCall *dc;
+    struct data_packet *dp;
+
+    dc = &((DevSWState *)(device->SwitcherState))->ds_activewrite;
+    dp = &dc->dc_packet;
+
+    return (dp == NULL || dp->data == NULL);
+}
+
+/* EOF devsw.c */
diff --git a/gdb/rdi-share/devsw.h b/gdb/rdi-share/devsw.h
new file mode 100644
index 0000000..f561768
--- /dev/null
+++ b/gdb/rdi-share/devsw.h
@@ -0,0 +1,268 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+#ifndef angsd_devsw_h
+#define angsd_devsw_h
+
+#include "devclnt.h"
+#include "adperr.h"
+#include "drivers.h"
+
+#ifndef __cplusplus
+typedef struct Packet Packet;
+typedef struct DevSWState DevSWState;
+#endif
+
+/*
+ * the basic structure used for passing packets around
+ */
+struct Packet
+{
+    struct Packet *pk_next;             /* XXX first field in struct */
+    unsigned int   pk_length;
+    unsigned char *pk_buffer;
+};
+
+/*
+ * control structure, used for maintaining device switcher state
+ */
+struct DevSWState
+{
+    unsigned int  ds_opendevchans;      /* bitmap of open device channels */
+
+    /*
+     * queue of packets read for the various device channels
+     */
+    Packet       *ds_readqueue[DC_NUM_CHANNELS];
+
+    /*
+     * structures for managing active read and write operations
+     */
+    Packet       *ds_nextreadpacket;
+    DriverCall    ds_activeread;
+    DriverCall    ds_activewrite;
+};
+
+#ifdef __cplusplus
+    extern "C" {
+#endif
+
+/*
+ *  Function: DevSW_AllocatePacket
+ *   Purpose: Claim some memory to hold a struct Packet, and the buffer for
+ *              that packet.
+ *
+ *    Params:
+ *       Input: length  Size of the buffer in struct Packet.
+ *
+ *   Returns:
+ *          OK: Pointer to the newly malloc()ed Packet.
+ *       Error: NULL
+ */
+Packet *DevSW_AllocatePacket(const unsigned int length);
+
+/*
+ *  Function: DevSW_FreePacket
+ *   Purpose: Free the memory associated with a struct Packet.
+ *
+ *  Pre-conditions The structure must have been originally claimed
+ *                      via DevSW_AllocatePacket.
+ *
+ *    Params:
+ *       Input: pk      The packet to be freed.
+ *
+ *   Returns: Nothing
+ */
+void DevSW_FreePacket(Packet *pk);
+
+/*
+ *  Function: DevSW_Open
+ *   Purpose: Open the specified device driver
+ *
+ *    Params:
+ *       Input: name    Identifies which device to open.  This can either be
+ *                      a host specific identifier (e.g. "/dev/ttya",
+ *                      "COM1:"), or a number which is used to refer to
+ *                      `standard' interfaces, so "1" would be the first host
+ *                      interface, "2" the second, and so on.
+ *
+ *              arg     Driver specific arguments.  For example, some serial
+ *                      drivers accept speed and control arguments such as
+ *                      "9600" or "19200/NO_BREAK".  These arguments are
+ *                      completely free-form: it is the individual drivers
+ *                      which do the necessary interpretation.
+ *
+ *              type    The type of packet the caller is interested in.  Only
+ *                      one open is allowed for each type of packet.
+ *
+ *      In/Out: device  The device driver to open
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_open_failed
+ *              adp_device_already_open
+ *              adp_malloc_failure
+ */
+AdpErrs DevSW_Open(DeviceDescr *device, const char *name, const char *arg,
+                   const DevChanID type);
+
+/*
+ *  Function: DevSW_Match
+ *   Purpose: Minimal veneer for DeviceMatch
+ *
+ *    Params:
+ *       Input: device  The device driver to match.
+ *
+ *              name    Identifies which device to open.  This can either be
+ *                      a host specific identifier (e.g. "/dev/ttya",
+ *                      "COM1:"), or a number which is used to refer to
+ *                      `standard' interfaces, so "1" would be the first host
+ *                      interface, "2" the second, and so on.
+ *
+ *              arg     Driver specific arguments.  For example, some serial
+ *                      drivers accept speed and control arguments such as
+ *                      "9600" or "19200/NO_BREAK".  These arguments are
+ *                      completely free-form: it is the individual drivers
+ *                      which do the necessary interpretation.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_failed
+ */
+AdpErrs DevSW_Match(const DeviceDescr *device, const char *name,
+                    const char *arg);
+
+/*
+ *  Function: DevSW_Close
+ *   Purpose: Close the specified device driver. All packets of the type
+ *              used by the caller held within the switching layer will
+ *              be discarded.
+ *
+ *  Pre-conditions: Device must have been previously opened.
+ *
+ *    Params:
+ *       Input: device  The device driver to close
+ *
+ *              type    The type of packet the caller was interested in.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ */
+AdpErrs DevSW_Close(const DeviceDescr *device, const DevChanID type);
+
+/*
+ *  Function: DevSW_Read
+ *   Purpose: Read a packet of appropriate type from the device driver
+ *
+ *    Params:
+ *       Input: device  The device driver to read packet from.
+ *
+ *              type    The type of packet the caller is interested in.
+ *
+ *      Output: packet  Pointer to new packet (if one is available)
+ *              NULL (if no complete packet is available)
+ *
+ *       Input: block   If TRUE, read may safely block for a short period
+ *                      of time (say up to 20ms), to avoid high CPU load
+ *                      whilst waiting for a reply.
+ *                      If FALSE, read MUST NOT block.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_bad_packet
+ *
+ * Post-conditions: The calling function is responsible for freeing the
+ *                      resources used by the packet when it is no longer
+ *                      needed.
+ */
+AdpErrs DevSW_Read(const DeviceDescr *device, const DevChanID type,
+                   Packet **packet, bool block);
+
+/*
+ *  Function: DevSW_Write
+ *   Purpose: Try to write a packet to the device driver.  The write will
+ *              be bounced if another write is still in progress.
+ *
+ *    Params:
+ *       Input: device  The device driver to write a packet to.
+ *
+ *              packet  The packet to be written.
+ *
+ *              type    The type to be assigned to the packet.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_illegal_args
+ *              adp_write_busy
+ *
+ * Post-conditions: The calling function retains "ownership" of the packet,
+ *                      i.e. it is responsible for freeing the resources used
+ *                      by the packet when it is no longer needed.
+ */
+AdpErrs DevSW_Write(const DeviceDescr *device, Packet *packet, DevChanID type);
+
+/*
+ *  Function: DevSW_FlushPendingWrite
+ *   Purpose: If a write is in progress, give it a chance to finish.
+ *
+ *    Params:
+ *       Input: device  The device driver to flush.
+ *
+ *   Returns:
+ *              adp_ok           no pending write, or write flushed completely
+ *              adp_write_busy   pending write not flushed completely
+ */
+AdpErrs DevSW_FlushPendingWrite(const DeviceDescr *device);
+
+/*
+ *  Function: DevSW_Ioctl
+ *   Purpose: Perform miscellaneous control operations.  This is a minimal
+ *              veneer to DeviceIoctl.
+ *
+ *    Params:
+ *       Input: device  The device driver to control.
+ *
+ *              opcode  Reason code indicating the operation to perform.
+ *
+ *      In/Out: args    Pointer to opcode-sensitive arguments/result space.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_failed
+ */
+AdpErrs DevSW_Ioctl(const DeviceDescr *device, const int opcode, void *args);
+
+/*
+ *  Function: DevSW_WriteFinished
+ *   Purpose: Return TRUE if the active device has finished writing
+ *              the last packet to be sent, or FALSE if a packet is still
+ *              being transmitted.
+ *
+ *    Params:
+ *       Input: device  The device driver to check.
+ *
+ *   Returns:
+ *        TRUE: write finished or inactive
+ *       FALSE: write in progress
+ */
+bool DevSW_WriteFinished(const DeviceDescr *device);
+
+#ifdef __cplusplus
+    }
+#endif
+
+#endif /* ndef angsd_devsw_h */
+
+/* EOF devsw.h */
diff --git a/gdb/rdi-share/drivers.c b/gdb/rdi-share/drivers.c
new file mode 100644
index 0000000..ba0eee5
--- /dev/null
+++ b/gdb/rdi-share/drivers.c
@@ -0,0 +1,34 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * drivers.c - declares a NULL terminated list of device driver
+ *             descriptors supported by the host.
+ */
+#include <stdio.h>
+
+#include "drivers.h"
+
+extern DeviceDescr angel_SerialDevice;
+extern DeviceDescr angel_SerparDevice;
+extern DeviceDescr angel_EthernetDevice;
+
+DeviceDescr *devices[] =
+{
+    &angel_SerialDevice,
+    &angel_SerparDevice,
+    &angel_EthernetDevice,
+    NULL
+};
+
+/* EOF drivers.c */
diff --git a/gdb/rdi-share/drivers.h b/gdb/rdi-share/drivers.h
new file mode 100644
index 0000000..3655c18
--- /dev/null
+++ b/gdb/rdi-share/drivers.h
@@ -0,0 +1,193 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Definitions for device driver interface.
+ */
+#ifndef angsd_drivers_h
+#define angsd_drivers_h
+
+#include "rxtx.h"
+
+#ifndef __cplusplus
+typedef struct DeviceDescr DeviceDescr;
+typedef struct DriverCall DriverCall;
+#endif
+
+/*
+ * used to pass packets across the driver interface
+ */
+struct DriverCall
+{
+    struct data_packet  dc_packet;
+    void               *dc_context;
+};
+
+/*
+ * used to describe a device driver
+ */
+struct DeviceDescr
+{
+    char  *DeviceName;
+    int  (*DeviceOpen)(const char *name, const char *arg);
+    int  (*DeviceMatch)(const char *name, const char *arg);
+    void (*DeviceClose)(void);
+    int  (*DeviceRead)(DriverCall *dc, bool block);
+    int  (*DeviceWrite)(DriverCall *dc);
+    int  (*DeviceIoctl)(const int opcode, void *args);
+    void  *SwitcherState;               /* used by switcher interface */
+};
+
+/*
+ *  Function: DeviceOpen
+ *
+ *   Purpose: Open a communications device
+ *
+ *  Pre-conditions: No previous open is still active
+ *
+ *    Params:
+ *       Input: name    Identifies which device to open.  This can either be
+ *                      a host specific identifier (e.g. "/dev/ttya",
+ *                      "COM1:"), or a number which is used to refer to
+ *                      `standard' interfaces, so "1" would be the first host
+ *                      interface, "2" the second, and so on.
+ *
+ *              arg     Driver specific arguments.  For example, some serial
+ *                      drivers accept speed and control arguments such as
+ *                      "9600" or "19200/NO_BREAK".  These arguments are
+ *                      completely free-form: it is the individual drivers
+ *                      which do the necessary interpretation.
+ *
+ *   Returns:
+ *          OK: 0
+ *       Error: -1
+ */
+extern int DeviceOpen(const char *name, const char *arg);
+
+/*
+ *  Function: DeviceMatch
+ *
+ *   Purpose: Check whether parameters are OK to be passed to DeviceOpen
+ *
+ *    Params:
+ *       Input: name    Identifies which device to open.  This can either be
+ *                      a host specific identifier (e.g. "/dev/ttya",
+ *                      "COM1:"), or a number which is used to refer to
+ *                      `standard' interfaces, so "1" would be the first host
+ *                      interface, "2" the second, and so on.
+ *
+ *              arg     Driver specific arguments.  For example, some serial
+ *                      drivers accept speed and control arguments such as
+ *                      "9600" or "19200/NO_BREAK".  These arguments are
+ *                      completely free-form: it is the individual drivers
+ *                      which do the necessary interpretation.
+ *
+ *   Returns:
+ *          OK: 0
+ *       Error: -1
+ */
+extern int DeviceMatch(const char *name, const char *arg);
+
+/*
+ *  Function: DeviceClose
+ *
+ *   Purpose: Close a communications device
+ *
+ *  Pre-conditions: Device must have been previously opened
+ *
+ *    Params: None
+ *
+ *   Returns: Nothing
+ */
+extern void DeviceClose(void);
+
+/*
+ *  Function: DeviceRead
+ *
+ *   Purpose: Try to read a complete packet from a communications device.
+ *              This read must usually be non-blocking, i.e. it should read as
+ *              many data from the device as needed to complete the packet,
+ *              but it should not wait if the packet is not complete, and no
+ *              more data are currently available from the device.
+ *            As an optimisation the read can optionally block when 'block'
+ *              is TRUE, but only for a short time.  It is acceptable for the
+ *              'block' parameter to be ignored in which case all reads
+ *              should be non-blocking.
+ *
+ *  Pre-conditions: Device has been opened via DeviceOpen()
+ *
+ *    Params:
+ *      In/Out: dc      Describes the packet being read (dc->dc_packet);
+ *                      dc->dc_context is for the driver to store private
+ *                      context, and is guaranteed to be NULL the first
+ *                      time DeviceRead is called for a given packet.
+ *
+ *          In: block   If TRUE, read may safely block for a short period
+ *                      of time (say up to 20ms), to avoid high CPU load
+ *                      whilst waiting for a reply.
+ *                      If FALSE, read MUST NOT block.
+ *
+ *   Returns:
+ *          OK:  1 (packet is complete)
+ *               0 (packet is not yet complete)
+ *       Error: -1 bad packet
+ *
+ *   Post-conditions: should a calamatous error occur panic() will be called
+ */
+extern int DeviceRead(DriverCall *dc, bool block);
+
+/*
+ *  Function: DeviceWrite
+ *
+ *   Purpose: Try to write a packet to a communications device.  This write
+ *              must be non-blocking, i.e. it should write as many data to
+ *              the device as is immediately possible, but should not wait
+ *              for space to send any more after that.
+ *
+ *  Pre-conditions: Device has been opened via DeviceOpen()
+ *
+ *    Params:
+ *      In/Out: dc      Describes the packet being written (dc->dc_packet);
+ *                      dc->dc_context is for the driver to store private
+ *                      context, and is guaranteed to be NULL the first
+ *                      time DeviceWrite is called for a given packet.
+ *
+ *   Returns:
+ *          OK:  1 (all of the packet has been written)
+ *               0 (some of the packet remains to be written)
+ *       Error: -1
+ */
+extern int DeviceWrite(DriverCall *dc);
+
+/*
+ *  Function: DeviceIoctl
+ *
+ *   Purpose: Perform miscellaneous driver operations
+ *
+ *  Pre-conditions: Device has been open via DeviceOpen()
+ *
+ *    Params:
+ *       Input: opcode  Reason code indicating the operation to perform
+ *      In/Out: args    Pointer to opcode-sensitive arguments/result space
+ *
+ *   Returns:
+ *          OK: 0
+ *       Error: -1
+ */
+extern int DeviceIoctl(const int opcode, void *args);
+
+#endif /* !defined(angsd_drivers_h) */
+
+/* EOF drivers.h */
diff --git a/gdb/rdi-share/endian.h b/gdb/rdi-share/endian.h
new file mode 100644
index 0000000..3d32d9a
--- /dev/null
+++ b/gdb/rdi-share/endian.h
@@ -0,0 +1,125 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * endian.h - target endianness independent read/write primitives.
+ */
+
+#ifndef angel_endian_h
+#define angel_endian_h
+
+/*
+ * The endianness of the data being processed needs to be known, but
+ * the host endianness is not required (since the data is constructed
+ * using bytes).  At the moment these are provided as macros. This
+ * gives the compiler freedom in optimising individual calls. However,
+ * if space is at a premium then functions should be provided.
+ *
+ * NOTE: These macros assume that the data has been packed in the same format
+ *       as the packing on the build host. If this is not the case then
+ *       the wrong addresses could be used when dealing with structures.
+ *
+ */
+
+/*
+ * For all the following routines the target endianness is defined by the
+ * following boolean definitions.
+ */
+#define BE (1 == 1) /* TRUE  : big-endian */
+#define LE (1 == 0) /* FALSE : little-endian */
+
+/*
+ * The following type definitions are used by the endianness converting
+ * macros.
+ */
+typedef unsigned char U8;
+typedef U8 *P_U8;
+typedef const U8 *CP_U8;
+
+typedef unsigned short U16;
+typedef U16 *P_U16;
+
+typedef unsigned int U32;
+typedef U32 *P_U32;
+
+/*
+ * If the endianness of the host and target are known (fixed) and the same
+ * then the following macro definitions can be used. These just directly copy
+ * the data.
+ *
+ * #define READ(e,a)       (a)
+ * #define WRITE(e,a,v)    ((a) = (v))
+ * #define PREAD(e,a)      (a)
+ * #define PWRITE(e,a,v)   (*(a) = (v))
+ */
+
+/*
+ * These macros assume that a byte (char) is 8bits in size, and that the
+ * endianness is not important when reading or writing bytes.
+ */
+#define PUT8(a,v)       (*((P_U8)(a)) = (U8)(v))
+#define PUT16LE(a,v)    (PUT8(a,((v) & 0xFF)), \
+                         PUT8((((P_U8)(a)) + sizeof(char)),((v) >> 8)))
+#define PUT16BE(a,v)    (PUT8(a,((v) >> 8)), \
+                         PUT8((((P_U8)(a)) + sizeof(char)),((v) & 0xFF)))
+#define PUT32LE(a,v)    (PUT16LE(a,v), \
+                         PUT16LE((((P_U8)(a)) + sizeof(short)),((v) >> 16)))
+#define PUT32BE(a,v)    (PUT16BE(a,((v) >> 16)), \
+                         PUT16BE((((P_U8)(a)) + sizeof(short)),v))
+
+#define GET8(a)     (*((CP_U8)(a)))
+#define GET16LE(a)  (GET8(a) | (((U16)GET8(((CP_U8)(a)) + sizeof(char))) << 8))
+#define GET16BE(a)  ((((U16)GET8(a)) << 8) | GET8(((CP_U8)(a)) + sizeof(char)))
+#define GET32LE(a)  (GET16LE(a) | \
+                     (((U32)GET16LE(((CP_U8)(a)) + sizeof(short))) << 16))
+#define GET32BE(a)  ((((U32)GET16BE(a)) << 16) | \
+                     GET16BE(((CP_U8)(a)) + sizeof(short)))
+
+/*
+ * These macros simplify the code in respect to reading and writing the
+ * correct size data when dealing with endianness. "e" is TRUE if we are
+ * dealing with big-endian data, FALSE if we are dealing with little-endian.
+ */
+
+/* void WRITE(int endianness, void *address, unsigned value); */
+
+#define WRITE16(e,a,v) ((e) ? PUT16BE(&(a),v) : PUT16LE(&(a),v))
+#define WRITE32(e,a,v) ((e) ? PUT32BE(&(a),v) : PUT32LE(&(a),v))
+#define WRITE(e,a,v)   ((sizeof(v) == sizeof(char)) ? \
+                        PUT8(&(a),v) : ((sizeof(v) == sizeof(short)) ? \
+                                        WRITE16(e,a,v) : WRITE32(e,a,v)))
+
+/* unsigned READ(int endianness, void *address) */
+#define READ16(e,a) ((e) ? GET16BE(&(a)) : GET16LE(&(a)))
+#define READ32(e,a) ((e) ? GET32BE(&(a)) : GET32LE(&(a)))
+#define READ(e,a) ((sizeof(a) == sizeof(char)) ? \
+                   GET8((CP_U8)&(a)) : ((sizeof(a) == sizeof(short)) ? \
+                                       READ16(e,a) : READ32(e,a)))
+
+/* void PWRITE(int endianness, void *address, unsigned value); */
+#define PWRITE16(e,a,v) ((e) ? PUT16BE(a,v) : PUT16LE(a,v))
+#define PWRITE32(e,a,v) ((e) ? PUT32BE(a,v) : PUT32LE(a,v))
+#define PWRITE(e,a,v)   ((sizeof(v) == sizeof(char)) ? \
+                         PUT8(a,v) : ((sizeof(v) == sizeof(short)) ? \
+                                      PWRITE16(e,a,v) : PWRITE32(e,a,v)))
+
+/* unsigned PREAD(int endianness, void *address) */
+#define PREAD16(e,a) ((e) ? GET16BE(a) : GET16LE(a))
+#define PREAD32(e,a) ((e) ? GET32BE(a) : GET32LE(a))
+#define PREAD(e,a) ((sizeof(*(a)) == sizeof(char)) ? \
+                    GET8((CP_U8)a) : ((sizeof(*(a)) == sizeof(short)) ? \
+                                     PREAD16(e,a) : PREAD32(e,a)))
+
+#endif /* !defined(angel_endian_h) */
+
+/* EOF endian.h */
diff --git a/gdb/rdi-share/etherdrv.c b/gdb/rdi-share/etherdrv.c
new file mode 100644
index 0000000..58462d4
--- /dev/null
+++ b/gdb/rdi-share/etherdrv.c
@@ -0,0 +1,730 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * etherdrv.c - Ethernet Driver for Angel.
+ */
+
+#ifdef __hpux
+# define _POSIX_SOURCE 1
+# define _HPUX_SOURCE 1
+# define _XOPEN_SOURCE 1
+#endif
+
+#include <stdio.h>
+#ifdef __hpux
+# define uint hide_HPs_uint
+#endif
+#ifdef STDC_HEADERS
+# include <unistd.h>
+# ifdef __hpux
+#   undef uint
+# endif
+#endif
+#include <stdlib.h>
+#include <string.h>
+#ifdef __hpux
+# define uint hide_HPs_uint
+#endif
+#include <fcntl.h>
+#ifdef __hpux
+# undef uint
+#endif
+#include <errno.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include "host.h"
+
+#ifdef COMPILING_ON_WINDOWS
+  typedef char * caddr_t;
+# undef IGNORE
+# include <winsock.h>
+# include "angeldll.h"
+#else
+# ifdef __hpux
+#   define uint hide_HPs_uint
+# endif
+# include <sys/types.h>
+# include <sys/socket.h>
+# ifdef __hpux
+#   undef uint
+# endif
+# include <netdb.h>
+# include <sys/time.h>
+# include <sys/ioctl.h>
+# ifdef HAVE_SYS_FILIO_H
+#   include <sys/filio.h>
+# endif
+# include <netinet/in.h>
+# include <arpa/inet.h>
+#endif
+
+#include "hsys.h"
+#include "devices.h"
+#include "endian.h"
+#include "buffers.h"
+#include "hostchan.h"
+#include "params.h"
+#include "logging.h"
+#include "ethernet.h"
+
+
+#if !defined(COMPILING_ON_WINDOWS) && !defined(STDC_HEADERS)
+/* These two might not work for windows.  */
+extern int sys_nerr;
+extern char * sys_errlist[];
+#endif
+
+#ifndef UNUSED
+# define UNUSED(x) (x = x)      /* Silence compiler warnings */
+#endif
+
+/*
+ * forward declarations of static functions
+ */
+static int EthernetOpen(const char *name, const char *arg);
+static int EthernetMatch(const char *name, const char *arg);
+static void EthernetClose(void);
+static int EthernetRead(DriverCall *dc, bool block);
+static int EthernetWrite(DriverCall *dc);
+static int EthernetIoctl(const int opcode, void *args);
+
+/*
+ * the device descriptor for Ethernet
+ */
+DeviceDescr angel_EthernetDevice =
+{
+    "Ethernet",
+    EthernetOpen,
+    EthernetMatch,
+    EthernetClose,
+    EthernetRead,
+    EthernetWrite,
+    EthernetIoctl
+};
+
+/*
+ * descriptor for the socket that we talk down
+ */
+static int sock = -1;
+
+/*
+ * address of the remote target
+ */
+static struct sockaddr_in remote, *ia = &remote;
+
+/*
+ * array of dynamic port numbers on target
+ */
+static unsigned short int ports[2];
+
+/*
+ *  Function: set_address
+ *   Purpose: Try to get an address into an understandable form
+ *
+ *    Params:
+ *       Input: addr    The address to parse
+ *
+ *      Output: ia      Structure to hold the parsed address
+ *
+ *   Returns:
+ *          OK:  0
+ *       Error: -1
+ */
+static int set_address(const char *const addr, struct sockaddr_in *const ia)
+{
+    ia->sin_family = AF_INET;
+
+    /*
+     * Try address as a dotted decimal
+     */
+    ia->sin_addr.s_addr = inet_addr(addr);
+
+    /*
+     * If that failed, try it as a hostname
+     */
+    if (ia->sin_addr.s_addr == (u_int)-1)
+    {
+        struct hostent *hp = gethostbyname(addr);
+
+        if (hp == NULL)
+            return -1;
+
+        (void)memcpy((caddr_t)&ia->sin_addr, hp->h_addr, hp->h_length);
+    }
+
+    return 0;
+}
+
+/*
+ *  Function: open_socket
+ *   Purpose: Open a non-blocking UDP socket, and bind it to a port
+ *              assigned by the system.
+ *
+ *    Params: None
+ *
+ *   Returns:
+ *          OK: socket descriptor
+ *       Error: -1
+ */
+static int open_socket(void)
+{
+    int sfd;
+#if 0                           /* see #if 0 just below -VVV- */
+    int yesplease = 1;
+#endif
+    struct sockaddr_in local;
+
+    /*
+     * open the socket
+     */
+#ifdef COMPILING_ON_WINDOWS
+    if ((sfd = socket(AF_INET, SOCK_DGRAM, 0)) == INVALID_SOCKET)
+        return -1;
+#else
+    if ((sfd = socket(AF_INET, SOCK_DGRAM, 0)) < 0)
+    {
+# ifdef DEBUG
+        perror("socket");
+# endif
+        return -1;
+    }
+#endif
+
+    /*
+     * 960731 KWelton
+     *
+     * I don't believe that this should be necessary - if we
+     * use select(), then non-blocking I/O is redundant.
+     * Unfortunately, select() appears to be broken (under
+     * Solaris, with a limited amount of time available for
+     * debug), so this code stays in for the time being
+     */
+#if 0
+    /*
+     * enable non-blocking I/O
+     */
+    if (ioctlsocket(sfd, FIONBIO, &yesplease) < 0)
+    {
+# ifdef DEBUG
+        perror("ioctl(FIONBIO)");
+# endif
+        closesocket(sfd);
+
+        return -1;
+    }
+#endif /* 0/1 */
+
+    /*
+     * bind local address to a system-assigned port
+     */
+    memset((char *)&local, 0, sizeof(local));
+    local.sin_family = AF_INET;
+    local.sin_port = htons(0);
+    local.sin_addr.s_addr = INADDR_ANY;
+    if (bind(sfd, (struct sockaddr *)&local, sizeof(local)) < 0)
+    {
+#ifdef DEBUG
+        perror("bind");
+#endif
+        closesocket(sfd);
+
+        return -1;
+    }
+
+    /*
+     * all done
+     */
+    return sfd;
+}
+
+/*
+ *  Function: fetch_ports
+ *   Purpose: Request assigned port numbers from remote target
+ *
+ *    Params: None
+ *
+ *   Returns: Nothing
+ *
+ * Post-conditions: This routine will *always* return something for the
+ *                      port numbers.  If the remote target does not
+ *                      respond, then it makes something up - this allows
+ *                      the standard error message (from ardi.c) to be
+ *                      generated when the target is dead for whatever
+ *                      reason.
+ */
+static void fetch_ports(void)
+{
+    int i;
+    const char ctrlpacket[] = CTRL_MAGIC;
+        CtrlResponse response;
+
+    /*
+     * we will try 3 times to elicit a response from the target
+     */
+    for (i = 0; i < 3; ++i)
+    {
+        struct timeval tv;
+        fd_set fdset;
+
+        /*
+         * send the magic string to the control
+         * port on the remote target
+         */
+        ia->sin_port = htons(CTRL_PORT);
+        if (sendto(sock, ctrlpacket, sizeof(ctrlpacket), 0,
+                       (struct sockaddr *)ia, sizeof(*ia)) < 0)
+        {
+#ifdef DEBUG
+            perror("fetch_ports: sendto");
+#endif
+            return;
+        }
+
+        FD_ZERO(&fdset);
+        FD_SET(sock, &fdset);
+        tv.tv_sec = 0;
+        tv.tv_usec = 250000;
+
+        if (select(sock + 1, &fdset, NULL, NULL, &tv) < 0)
+        {
+#ifdef DEBUG
+            perror("fetch_ports: select");
+#endif
+            return;
+        }
+
+        if (FD_ISSET(sock, &fdset))
+        {
+            /*
+             * there is something there - read it
+             */
+            if (recv(sock, (char *)&response, sizeof(response), 0) < 0)
+            {
+#ifdef COMPILING_ON_WINDOWS
+                unsigned int werrno = WSAGetLastError();
+
+                if (werrno == WSAEWOULDBLOCK || werrno == 0)
+#else
+                if (errno == EWOULDBLOCK)
+#endif
+                {
+                    --i;
+                    continue;
+                }
+                else
+                {
+#ifdef DEBUG
+                    perror("fetch_ports: recv");
+#endif
+                    return;
+                }
+            }
+            {
+                /*
+                 * XXX
+                 *
+                 * this is *very* unpleasant - try to match the structure
+                 * layout
+                 */
+                unsigned short *sptr = (unsigned short *)(response + RESP_DBUG);
+
+                if (strcmp(response, ctrlpacket) == 0)
+                {
+                    ports[DBUG_INDEX] = htons(*sptr);
+                    sptr++;
+                    ports[APPL_INDEX] = htons(*sptr);
+                }
+
+#ifdef DEBUG
+                printf("fetch_ports: got response, DBUG=%d, APPL=%d\n",
+                       ports[DBUG_INDEX], ports[APPL_INDEX]);
+#endif
+                return;
+            }
+        }
+    }
+
+    /*
+     * we failed to get a response
+     */
+#ifdef DEBUG
+    printf("fetch_ports: failed to get a real answer\n");
+#endif
+}
+
+/*
+ *  Function: read_packet
+ *   Purpose: read a packet, and pass it back to higher levels
+ *
+ *    Params:
+ *      In/Out: packet  Holder for the read packet
+ *
+ *   Returns:  1 - Packet is complete
+ *             0 - No complete packet read
+ *
+ * Post-conditions: Will call panic() if something goes wrong with the OS
+ */
+static int read_packet(struct data_packet *const packet)
+{
+    struct sockaddr_in from;
+    int nbytes, fromlen = sizeof(from);
+    DevChanID devchan;
+
+    /*
+     * try to get the packet
+     */
+    if ((nbytes = recvfrom(sock, (char *)(packet->data), packet->buf_len, 0,
+                           (struct sockaddr *)&from, &fromlen)) < 0)
+    {
+#ifdef COMPILING_ON_WINDOWS
+        if (nbytes == SOCKET_ERROR && WSAGetLastError() != WSAEWOULDBLOCK)
+            MessageBox(GetFocus(), "Error receiving packet\n", "Angel", MB_OK | MB_ICONSTOP);
+#else
+        if (errno != EWOULDBLOCK)
+        {
+# ifdef DEBUG
+            perror("recv");
+# endif
+            panic("ethernet recv failure");
+        }
+#endif
+        return 0;
+    }
+
+#ifdef COMPILING_ON_WINDOWS
+    if (pfnProgressCallback != NULL && nbytes != SOCKET_ERROR)
+    {
+        progressInfo.nRead += nbytes;
+        (*pfnProgressCallback)(&progressInfo);
+    }
+#endif
+
+    /*
+     * work out where the packet was from
+     */
+    if (from.sin_addr.s_addr != remote.sin_addr.s_addr)
+    {
+        /*
+         * not from our target - ignore it
+         */
+#ifdef DEBUG
+        printf("read_packet: ignoring packet from %s\n",
+               inet_ntoa(from.sin_addr));
+#endif
+
+        return 0;
+    }
+    else if (ntohs(from.sin_port) == ports[DBUG_INDEX])
+        devchan = DC_DBUG;
+    else if (ntohs(from.sin_port) == ports[APPL_INDEX])
+        devchan = DC_APPL;
+    else
+    {
+        /*
+         * unknown port number - ignore it
+         */
+#ifdef DEBUG
+        printf("read_packet: ignore packet from port %hd\n",
+               htons(from.sin_port));
+#endif
+
+        return 0;
+    }
+
+#if defined(DEBUG) && !defined(DO_TRACE)
+    printf("EthernetRead: %d bytes from %s channel\n",
+           nbytes, (devchan == DC_DBUG) ? "DBUG" : "APPL");
+#endif
+
+#ifdef DO_TRACE
+    printf("[%d on %d]\n", nbytes, devchan);
+    {
+        int i = 0;
+        unsigned char *cptr = packet->data;
+
+        while (i < nbytes)
+        {
+            printf("<%02X ", *(cptr++));
+
+            if (!(++i % 16))
+                printf("\n");
+        }
+
+        if (i % 16)
+            printf("\n");
+    }
+#endif
+
+    /*
+     * OK - fill in the details
+     */
+    packet->type = devchan;
+    packet->len = nbytes;
+    return 1;
+}
+
+/**********************************************************************/
+
+/*
+ *  Function: Ethernet_Open
+ *   Purpose: Open the Ethernet device.  See the documentation for
+ *              DeviceOpen in drivers.h
+ *
+ * Post-conditions: Will have updated struct sockaddr_in remote (*ia)
+ *                      with the address of the remote target.
+ */
+static int EthernetOpen(const char *name, const char *arg)
+{
+#ifdef COMPILING_ON_WINDOWS
+    WORD wVersionRequested;
+    WSADATA wsaData;
+#endif
+    /*
+     * name is passed as e=<blah>, so skip 1st two characters
+     */
+    const char *etheraddr = name + 2;
+
+#ifdef DEBUG
+    printf("EthernetOpen: name `%s'\n", name);
+#endif
+
+    /* Check that the name is a valid one */
+    if (EthernetMatch(name, arg) != 0)
+        return -1;
+
+#ifdef COMPILING_ON_WINDOWS
+    wVersionRequested = MAKEWORD(1, 1);
+    if (WSAStartup(wVersionRequested, &wsaData) != 0)
+        /*
+         * Couldn't find a useable winsock.dll.
+         */
+        return -1;
+
+    if ( LOBYTE( wsaData.wVersion ) != 1 || HIBYTE( wsaData.wVersion ) != 1 )
+    {
+        WSACleanup();
+
+        /*
+         * Couldn't find a winsock.dll with supported version.
+         */
+        return -1;
+    }
+#endif
+
+    memset((char *)ia, 0, sizeof(*ia));
+    if (set_address(etheraddr, ia) < 0)
+    {
+#ifdef COMPILING_ON_WINDOWS
+        /*
+         * SJ - I'm not sure that this is the correct way to handle this
+         * as Fail calls remote_disable and exits, while panic just exits.
+         * However at the time of writing remote_disable does nothing!
+         */
+ /*     Panic("EthernetOpen: bad name `%s'\n", etheraddr); */
+#else
+        Fail("EthernetOpen: bad name `%s'\n", etheraddr);
+#endif
+        return -1;
+    }
+
+    if ((sock = open_socket()) < 0)
+        return -1;
+
+    /*
+     * fetch the port numbers assigned by the remote target
+     * to its Debug and Application sockets
+     */
+    fetch_ports();
+
+    return 0;
+}
+
+static int EthernetMatch(const char *name, const char *arg)
+{
+    /* IGNORE arg */
+    if (0)
+        arg = arg;
+
+    if (name == NULL)
+        return -1;
+
+    if (tolower(name[0]) != 'e' || name[1] != '=')
+        return -1;
+
+    return 0;
+}
+
+static void EthernetClose(void)
+{
+    if (sock >= 0)
+    {
+        closesocket(sock);
+        sock = -1;
+    }
+
+#ifdef COMPILING_ON_WINDOWS
+    WSACleanup();
+#endif
+}
+
+static int EthernetRead(DriverCall *dc, bool block)
+{
+    fd_set fdset;
+    struct timeval tv;
+    int err;
+
+    FD_ZERO(&fdset);
+    FD_SET(sock, &fdset);
+
+#ifdef COMPILING_ON_WINDOWS
+    UNUSED(block);
+    tv.tv_sec = tv.tv_usec = 0;
+#else
+    tv.tv_sec = 0;
+    tv.tv_usec = (block ? 10000 : 0);
+#endif
+
+    err = select(sock + 1, &fdset, NULL, NULL, &tv);
+
+    if (err < 0) {
+      if (errno == EINTR) {
+        return 0;
+      }
+      panic("ethernet select failure (errno=%i)",errno);
+      return 0;
+    }
+
+    if (FD_ISSET(sock, &fdset))
+      return read_packet(&dc->dc_packet);
+    else
+      return 0;
+}
+
+static int EthernetWrite(DriverCall *dc)
+{
+    int nbytes;
+    struct data_packet *packet = &dc->dc_packet;
+
+    if (packet->type == DC_DBUG)
+        ia->sin_port = htons(ports[DBUG_INDEX]);
+    else if (packet->type == DC_APPL)
+        ia->sin_port = htons(ports[APPL_INDEX]);
+    else
+    {
+        panic("EthernetWrite: unknown devchan");
+        return 0;
+    }
+
+#if defined(DEBUG) && !defined(DO_TRACE)
+    printf("EthernetWrite: %d bytes to %s channel\n",
+           packet->len, (packet->type == DC_DBUG) ? "DBUG" : "APPL");
+#endif
+
+#ifdef DO_TRACE
+    printf("[%d on %d]\n", packet->len, packet->type);
+    {
+        int i = 0;
+        unsigned char *cptr = packet->data;
+
+        while (i < packet->len)
+        {
+            printf(">%02X ", *(cptr++));
+
+            if (!(++i % 16))
+                printf("\n");
+        }
+
+        if (i % 16)
+            printf("\n");
+    }
+#endif
+
+    if ((nbytes = sendto(sock, (char *)(packet->data), packet->len, 0,
+                         (struct sockaddr *)ia, sizeof(*ia))) != packet->len)
+    {
+#ifdef COMPILING_ON_WINDOWS
+        if (nbytes == SOCKET_ERROR && WSAGetLastError() != WSAEWOULDBLOCK)
+#else
+        if (nbytes < 0 && errno != EWOULDBLOCK)
+#endif
+        {
+#ifdef DEBUG
+            perror("sendto");
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+            panic("ethernet send failure\n");
+#else
+            /* might not work for Windows */
+            panic("ethernet send failure [%s]\n",
+#ifdef STDC_HEADERS
+		  strerror(errno));
+#else
+                  errno < sys_nerr ? sys_errlist[errno] : "unknown errno");
+#endif /* STDC_HEADERS */
+#endif
+        }
+#ifdef DEBUG
+        else if (nbytes >= 0)
+            fprintf(stderr, "ethernet send: asked for %d, sent %d\n", packet->len, nbytes);
+#endif
+        return 0;
+    }
+
+#ifdef COMPILING_ON_WINDOWS
+    if (pfnProgressCallback != NULL && nbytes != SOCKET_ERROR)
+    {
+        progressInfo.nWritten += nbytes;
+        (*pfnProgressCallback)(&progressInfo);
+    }
+#endif
+
+    return 1;
+}
+
+static int EthernetIoctl(const int opcode, void *args)
+{
+#ifdef DEBUG
+    printf( "EthernetIoctl: op %d arg %x\n", opcode, args );
+#endif
+
+    /*
+     * IGNORE(opcode)
+     */
+    if (0)
+    {
+        int dummy = opcode;
+        UNUSED(dummy);
+    }
+    UNUSED(args);
+
+    switch ( opcode )
+    {
+        case DC_RESYNC:
+        {
+#ifdef DEBUG
+            printf( "EthernetIoctl: resync\n" );
+#endif
+            fetch_ports();
+            return 0;
+        }
+
+        default:
+        {
+            return -1;
+        }
+    }
+}
+
+/* EOF etherdrv.c */
diff --git a/gdb/rdi-share/ethernet.h b/gdb/rdi-share/ethernet.h
new file mode 100644
index 0000000..930aced
--- /dev/null
+++ b/gdb/rdi-share/ethernet.h
@@ -0,0 +1,99 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * ethernet.h:  Angel drivers for Ethernet using Fusion UDP/IP stack
+ */
+#ifndef angel_ethernet_h
+#define angel_ethernet_h
+
+/*
+ * the UDP ports that Angel Ethernet uses
+ */
+#define CTRL_PORT       1913
+
+/*
+ * the size of the largest packet accepted on the control socket
+ */
+#define CTRL_MAXPACKET  6
+
+/*
+ * This is the "magic number" sent to the control port to
+ * request that the channel port numbers are returned
+ */
+#define CTRL_MAGIC      "Angel"
+
+/*
+ * Array used for responding to a request on the control port
+ */
+typedef unsigned char CtrlResponse[10];
+#define RESP_MAGIC 0
+#define RESP_DBUG  6
+#define RESP_APPL  8
+
+/*
+ * indices for accessing the array of port numbers sent
+ * over the control socket
+ */
+#define DBUG_INDEX      0
+#define APPL_INDEX      1
+
+#ifdef TARGET
+
+# include "devdriv.h"
+
+extern const struct angel_DeviceEntry angel_EthernetDevice;
+
+/*
+ *  Function: angel_EthernetPoll
+ *   Purpose: Poll Fusion for newly arrived packets
+ *
+ *  Pre-conditions: Called in SVC mode with the lock
+ *
+ *    Params:
+ *       Input: data    IGNORE'd
+ *
+ *   Returns: Nothing
+ *
+ * Post-conditions: Will have passed any packets received along to
+ *                      higher levels
+ */
+void angel_EthernetPoll(unsigned int data);
+
+void angel_EthernetNOP(unsigned int data);
+
+
+/*
+ *  Function: angel_FindEthernetConfigBlock
+ *   Purpose: Search the Flash for an ethernet config block and return
+ *            it if found.
+ *
+ *    Params: None
+ *
+ *   Returns: NULL if no config block found, the address if one is found.
+ *
+ */
+extern angel_EthernetConfigBlock *angel_FindEthernetConfigBlock(void);
+
+#else /* def TARGET */
+
+# ifndef COMPILING_ON_WINDOWS
+#  define ioctlsocket(x, y, z)  ioctl((x), (y), (z))
+#  define closesocket(x)        close(x)
+# endif
+
+#endif /* def TARGET */
+
+#endif /* ndef angel_ethernet_h */
+
+/* EOF ethernet.h */
diff --git a/gdb/rdi-share/host.h b/gdb/rdi-share/host.h
new file mode 100644
index 0000000..4dffa84
--- /dev/null
+++ b/gdb/rdi-share/host.h
@@ -0,0 +1,230 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+
+#ifndef _host_LOADED
+#define _host_LOADED 1
+
+#include <stdio.h>
+#include <stddef.h>
+#include <stdlib.h>
+
+#ifndef SEEK_SET
+#  define SEEK_SET  0
+#endif
+#ifndef SEEK_CUR
+#  define SEEK_CUR  1
+#endif
+#ifndef SEEK_END
+#  define SEEK_END  2
+#endif
+
+/* The following for the benefit of compiling on SunOS */
+#ifndef offsetof
+#  define offsetof(T, member)  ((char *)&(((T *)0)->member) - (char *)0)
+#endif
+
+/* If under Cygwin, provide backwards compatibility with older
+   Cygwin compilers that don't define the current cpp define. */
+#ifdef __CYGWIN32__
+#ifndef __CYGWIN__
+#define __CYGWIN__
+#endif
+#endif
+
+#ifdef unix                   /* A temporary sop to older compilers */
+#  ifndef __unix              /* (good for long-term portability?)  */
+#    define __unix    1
+#  endif
+#endif
+
+#ifdef __unix
+/* Generic unix -- hopefully a split into other variants will not be    */
+/* needed.  However, beware the 'bsd' test above and safe_toupper etc.  */
+/* which cope with backwards (pre-posix/X/open) unix compatility.       */
+#  define COMPILING_ON_UNIX     1
+#endif
+#if defined(_WIN32)
+#  define COMPILING_ON_WIN32    1
+#  if !defined(__CYGWIN32__)
+#    define COMPILING_ON_WINDOWS  1
+#  endif
+#endif
+#if defined(_CONSOLE)
+#  define COMPILING_ON_WINDOWS_CONSOLE 1
+#  define COMPILING_ON_WINDOWS 1
+#endif
+#ifdef _MSC_VER
+#  define COMPILING_ON_MSDOS    1
+#  define COMPILING_ON_WINDOWS  1
+#  if defined(__cplusplus)
+#    define IMPLEMENT_BOOL_AS_INT 1 /* VC++ doesn't have 'bool' (yet) */
+#  endif
+#endif
+/* The '(defined(__sparc) && defined(P_tmpdir)                     */
+/* && !defined(__svr4__))' is to detect gcc on SunOS.              */
+/* C++ compilers don't have to define __STDC__                     */
+#if (defined(__sparc) && defined(P_tmpdir))
+#  if defined(__svr4__)
+#    define COMPILING_ON_SOLARIS
+#  else
+#    define COMPILING_ON_SUNOS
+#  endif
+#endif
+#ifdef __hppa
+#  define COMPILING_ON_HPUX
+#endif
+
+/*
+ * The following typedefs may need alteration for obscure host machines.
+ */
+#if defined(__alpha) && defined(__osf__) /* =========================== */
+/* Under OSF the alpha has 64-bit pointers and 64-bit longs.            */
+typedef                int   int32;
+typedef unsigned       int   unsigned32;
+/* IPtr and UPtr are 'ints of same size as pointer'.  Do not use in     */
+/* new code.  Currently only used within 'ncc'.                         */
+typedef          long  int   IPtr;
+typedef unsigned long  int   UPtr;
+
+#else /* all hosts except alpha under OSF ============================= */
+
+typedef          long  int   int32;
+typedef unsigned long  int   unsigned32;
+/* IPtr and UPtr are 'ints of same size as pointer'.  Do not use in     */
+/* new code.  Currently only used within 'ncc'.                         */
+#define IPtr int32
+#define UPtr unsigned32
+#endif /* ============================================================= */
+
+typedef          short int   int16;
+typedef unsigned short int   unsigned16;
+typedef   signed       char  int8;
+typedef unsigned       char  unsigned8;
+
+/* The following code defines the 'bool' type to be 'int' under C       */
+/* and real 'bool' under C++.  It also avoids warnings such as          */
+/* C++ keyword 'bool' used as identifier.  It can be overridden by      */
+/* defining IMPLEMENT_BOOL_AS_ENUM or IMPLEMENT_BOOL_AS_INT.            */
+#undef _bool
+
+#ifdef IMPLEMENT_BOOL_AS_ENUM
+   enum _bool { _false, _true };
+#  define _bool enum _bool
+#elif defined(IMPLEMENT_BOOL_AS_INT) || !defined(__cplusplus)
+#  define _bool int
+#  define _false 0
+#  define _true 1
+#endif
+
+#ifdef _bool
+#  if defined(_MFC_VER) || defined(__CC_NORCROFT) /* When using MS Visual C/C++ v4.2 */
+#    define bool _bool /* avoids "'bool' is reserved word" warning      */
+#  else
+     typedef _bool bool;
+#  endif
+#  define true _true
+#  define false _false
+#endif
+
+#define YES   true
+#define NO    false
+#undef TRUE             /* some OSF headers define as 1                 */
+#define TRUE  true
+#undef FALSE            /* some OSF headers define as 1                 */
+#define FALSE false
+
+/* 'uint' conflicts with some Unixen sys/types.h, so we now don't define it */
+typedef unsigned8  uint8;
+typedef unsigned16 uint16;
+typedef unsigned32 uint32;
+
+typedef unsigned   Uint;
+typedef unsigned8  Uint8;
+typedef unsigned16 Uint16;
+typedef unsigned32 Uint32;
+
+#ifdef ALPHA_TASO_SHORT_ON_OSF /* was __alpha && __osf.                 */
+/* The following sets ArgvType for 64-bit pointers so that              */
+/* DEC Unix (OSF) cc can be used with the -xtaso_short compiler option  */
+/* to force pointers to be 32-bit.  Not currently used since most/all   */
+/* ARM tools accept 32 or 64 bit pointers transparently.  See IPtr.     */
+#pragma pointer_size (save)
+#pragma pointer_size (long)
+typedef char *ArgvType;
+#pragma pointer_size (restore)
+#else
+typedef char *ArgvType;
+#endif
+
+/*
+ * Rotate macros
+ */
+#define ROL_32(val, n) \
+((((unsigned32)(val) << (n)) | ((unsigned32)(val) >> (32-(n)))) & 0xFFFFFFFFL)
+#define ROR_32(val, n) \
+((((unsigned32)(val) >> (n)) | ((unsigned32)(val) << (32-(n)))) & 0xFFFFFFFFL)
+
+#ifdef COMPILING_ON_UNIX
+#  define FOPEN_WB     "w"
+#  define FOPEN_RB     "r"
+#  define FOPEN_RWB    "r+"
+#  ifndef __STDC__                     /* caveat RISCiX... */
+#    define remove(file) unlink(file)  /* a horrid hack, but probably best? */
+#  endif
+#else
+#  define FOPEN_WB     "wb"
+#  define FOPEN_RB     "rb"
+#  define FOPEN_RWB    "rb+"
+#endif
+
+#ifndef FILENAME_MAX
+#  define FILENAME_MAX 256
+#endif
+
+#if (!defined(__STDC__) && !defined(__cplusplus) && !defined(_MSC_VER)) || \
+    defined(COMPILING_ON_SUNOS)
+/* Use bcopy rather than memmove, as memmove is not available.     */
+/* There does not seem to be a header for bcopy.                   */
+void bcopy(const char *src, char *dst, int length);
+#  define memmove(d,s,l) bcopy(s,d,l)
+
+/* BSD/SUN don't have strtoul(), but then strtol() doesn't barf on */
+/* overflow as required by ANSI... This bodge is horrid.           */
+#  define strtoul(s, ptr, base) strtol(s, ptr, base)
+
+/* strtod is present in the C-library but is not in stdlib.h       */
+extern double strtod(const char *str, char **ptr);
+#endif
+
+/* For systems that do not define EXIT_SUCCESS and EXIT_FAILURE */
+#ifndef EXIT_SUCCESS
+#  define EXIT_SUCCESS           0
+#endif
+#ifndef EXIT_FAILURE
+#  define EXIT_FAILURE           1
+#endif
+
+#ifndef IGNORE
+#define IGNORE(x) (x = x)  /* Silence compiler warnings for unused arguments */
+#endif
+
+/* Define endian-ness of host */
+
+#if defined(__acorn) || defined(__mvs) || defined(_WIN32) || \
+  (defined(__alpha) && defined(__osf__))
+#  define HOST_ENDIAN_LITTLE
+#elif defined(__sparc) || defined(macintosh)
+#  define HOST_ENDIAN_BIG
+#else
+#  define HOST_ENDIAN_UNKNOWN
+#endif
+
+#endif
+
+/* end of host.h */
diff --git a/gdb/rdi-share/hostchan.c b/gdb/rdi-share/hostchan.c
new file mode 100644
index 0000000..8e41da4
--- /dev/null
+++ b/gdb/rdi-share/hostchan.c
@@ -0,0 +1,1057 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * hostchan.c - Semi Synchronous Host side channel interface for Angel.
+ */
+
+#include <stdio.h>
+
+#ifdef HAVE_SYS_TIME_H
+#  include <sys/time.h>
+#else
+#  include "winsock.h"
+#  include "time.h"
+#endif
+#include "hsys.h"
+#include "host.h"
+#include "logging.h"
+#include "chandefs.h"
+#include "chanpriv.h"
+#include "devclnt.h"
+#include "buffers.h"
+#include "drivers.h"
+#include "adperr.h"
+#include "devsw.h"
+#include "hostchan.h"
+
+#ifndef UNUSED
+#define UNUSED(x) (x = x)  /* Silence compiler warnings for unused arguments */
+#endif
+
+#define HEARTRATE 5000000
+
+/*
+ * list of available drivers, declared in drivers.c
+ */
+extern DeviceDescr *devices[];
+
+static DeviceDescr *deviceToUse = NULL;
+
+static struct Channel {
+    ChannelCallback callback;
+    void *callback_state;
+} channels[CI_NUM_CHANNELS];
+
+static unsigned char HomeSeq;
+static unsigned char OppoSeq;
+
+/*
+ * Handler for DC_APPL packets
+ */
+static DC_Appl_Handler dc_appl_handler = NULL;
+
+/*
+ * slots for registered asynchronous processing callback procedures
+ */
+#define MAX_ASYNC_CALLBACKS 8
+static unsigned int             num_async_callbacks = 0;
+static Adp_Async_Callback       async_callbacks[MAX_ASYNC_CALLBACKS];
+
+/*
+ * writeQueueRoot is the queue of write requests pending acknowledgement
+ * writeQueueSend is the queue of pending write requests which will
+ * be a subset of the list writeQueueRoot
+ */
+static Packet *writeQueueRoot = NULL;
+static Packet *writeQueueSend = NULL;
+static Packet *resend_pkt = NULL;
+static int resending = FALSE;
+
+/* heartbeat_enabled is a flag used to indicate whether the heartbeat is
+ * currently turned on, heartbeat_enabled will be false in situations
+ * where even though a heartbeat is being used it is problematical or
+ * dis-advantageous to have it turned on, for instance during the 
+ * initial stages of boot up
+ */
+unsigned int heartbeat_enabled = FALSE;
+/* heartbeat_configured is set up by the device driver to indicate whether
+ * the heartbeat is being used during this debug session.  In contrast to
+ * heartbeat_enabled it must not be changed during a session.  The logic for
+ * deciding whether to send a heartbeat is: Is heartbeat_configured for this
+ * session? if and only if it is then if heartbeat[is currently]_enabled and
+ * we are due to send a pulse then send it 
+ */
+unsigned int heartbeat_configured = TRUE;
+
+void Adp_initSeq( void ) {
+  Packet *tmp_pkt = writeQueueSend;
+
+  HomeSeq = 0;
+  OppoSeq = 0;
+  if ( writeQueueSend != NULL) {
+    while (writeQueueSend->pk_next !=NULL) {
+      tmp_pkt = writeQueueSend;
+      writeQueueSend = tmp_pkt->pk_next;
+      DevSW_FreePacket(tmp_pkt);
+    }
+  }
+  tmp_pkt = writeQueueRoot;
+  if ( writeQueueRoot == NULL)
+    return;
+
+  while (writeQueueRoot->pk_next !=NULL) {
+    tmp_pkt = writeQueueRoot;
+    writeQueueRoot = tmp_pkt->pk_next;
+    DevSW_FreePacket(tmp_pkt);
+  }
+  return;
+}
+
+/**********************************************************************/
+
+/*
+ *  Function: DummyCallback
+ *   Purpose: Default callback routine to handle unexpected input
+ *              on a channel
+ *
+ *    Params:
+ *       Input: packet  The received packet
+ *
+ *              state   Contains nothing of significance
+ *
+ *   Returns: Nothing
+ */
+static void DummyCallback(Packet *packet, void *state)
+{
+    ChannelID chan;
+    const char fmt[] = "Unexpected read on channel %u, length %d\n";
+    char fmtbuf[sizeof(fmt) + 24];
+
+    UNUSED(state);
+
+    chan = *(packet->pk_buffer);
+    sprintf(fmtbuf, fmt, chan, packet->pk_length);
+    printf(fmtbuf);
+
+    /*
+     * junk this packet
+     */
+    DevSW_FreePacket(packet);
+}
+
+/*
+ *  Function: BlockingCallback
+ *   Purpose: Callback routine used to implement a blocking read call
+ *
+ *    Params:
+ *       Input: packet  The received packet.
+ *
+ *      Output: state   Address of higher level's pointer to the received
+ *                      packet.
+ *
+ *   Returns: Nothing
+ */
+static void BlockingCallback(Packet *packet, void *state)
+{
+    /*
+     * Pass the packet back to the caller which requested a packet
+     * from this channel.  This also flags the completion of the I/O
+     * request to the blocking read call.
+     */
+    *((Packet **)state) = packet;
+}
+
+/*
+ *  Function: FireCallback
+ *   Purpose: Pass received packet along to the callback routine for
+ *              the appropriate channel
+ *
+ *    Params:
+ *       Input: packet  The received packet.
+ *
+ *   Returns: Nothing
+ *
+ * Post-conditions: The Target-to-Host sequence number for the channel
+ *                      will have been incremented.
+ */
+static void FireCallback(Packet *packet)
+{
+    ChannelID chan;
+    struct Channel *ch;
+
+    /*
+     * is this a sensible channel number?
+     */
+    chan = *(packet->pk_buffer);
+    if (invalidChannelID(chan))
+    {
+        printf("ERROR: invalid ChannelID received from target\n");
+
+        /*
+         * free the packet's resources, 'cause no-one else will
+         */
+        DevSW_FreePacket(packet);
+        return;
+    }
+
+    /*
+     * looks OK - increment sequence number, and pass packet to callback
+     */
+    ch = channels + chan;
+    (ch->callback)(packet, ch->callback_state);
+}
+
+/**********************************************************************/
+
+/*
+ * These are the externally visible functions.  They are documented
+ * in hostchan.h
+ */
+void Adp_addToQueue(Packet **head, Packet *newpkt)
+{
+    /*
+     * this is a bit of a hack
+     */
+    Packet *pk;
+
+    /*
+     * make sure that the hack we are about to use will work as expected
+     */
+    ASSERT(&(((Packet *)0)->pk_next) == 0, "bad struct Packet layout");
+
+#if DEBUG && 0
+    printf("Adp_addToQueue(%p, %p)\n", head, newpkt);
+#endif
+
+    /*
+     * here's the hack - it relies upon the next
+     * pointer being at the start of Packet.
+     */
+    pk = (Packet *)(head);
+
+    /*
+     * skip to the end of the queue
+     */
+    while (pk->pk_next != NULL)
+        pk = pk->pk_next;
+
+    /*
+     * now add the new element
+     */
+    newpkt->pk_next = NULL;
+    pk->pk_next = newpkt;
+}
+
+Packet *Adp_removeFromQueue(Packet **head)
+{
+    struct Packet *pk;
+
+    pk = *head;
+
+    if (pk != NULL)
+        *head = pk->pk_next;
+
+    return pk;
+}
+
+AdpErrs Adp_OpenDevice(const char *name, const char *arg,
+                       unsigned int heartbeat_on)
+{
+    int i;
+    AdpErrs retc;
+    ChannelID chan;
+
+#ifdef DEBUG
+    printf("Adp_OpenDevice(%s, %s)\n", name, arg ? arg : "<NULL>");
+#endif
+
+    heartbeat_configured = heartbeat_on;
+    if (deviceToUse != NULL)
+        return adp_device_already_open;
+
+    for (i = 0; (deviceToUse = devices[i]) != NULL; ++i)
+        if (DevSW_Match(deviceToUse, name, arg) == adp_ok)
+            break;
+
+    if (deviceToUse == NULL)
+        return adp_device_not_found;
+
+    /*
+     * we seem to have found a suitable device driver, so try to open it
+     */
+    if ((retc = DevSW_Open(deviceToUse, name, arg, DC_DBUG)) != adp_ok)
+    {
+        /* we don't have a device to use */
+        deviceToUse = NULL;
+        return retc;
+    }
+
+    /*
+     * there is no explicit open on channels any more, so
+     * initialise state for all channels.
+     */
+    for (chan = 0; chan < CI_NUM_CHANNELS; ++chan)
+    {
+        struct Channel *ch = channels + chan;
+
+        ch->callback = DummyCallback;
+        ch->callback_state = NULL;
+        OppoSeq = 0;
+        HomeSeq = 0;
+    }
+
+    return adp_ok;
+}
+
+AdpErrs Adp_CloseDevice(void)
+{
+    AdpErrs retc;
+
+#ifdef DEBUG
+    printf("Adp_CloseDevice\n");
+#endif
+
+    if (deviceToUse == NULL)
+        return adp_device_not_open;
+
+    heartbeat_enabled = FALSE;
+
+    retc = DevSW_Close(deviceToUse, DC_DBUG);
+
+    /*
+     * we have to clear deviceToUse, even when the lower layers
+     * faulted the close, otherwise the condition will never clear
+     */
+    if (retc != adp_ok)
+        WARN("DevSW_Close faulted the call");
+
+    deviceToUse = NULL;
+    return retc;
+}
+
+AdpErrs Adp_Ioctl(int opcode, void *args)
+{
+#ifdef DEBUG
+    printf("Adp_Ioctl\n");
+#endif
+
+    if (deviceToUse == NULL)
+        return adp_device_not_open;
+
+    return DevSW_Ioctl(deviceToUse, opcode, args);
+}
+
+AdpErrs Adp_ChannelRegisterRead(const ChannelID chan,
+                                const ChannelCallback cbfunc,
+                                void *cbstate)
+{
+#ifdef DEBUG
+    printf("Adp_ChannelRegisterRead(%d, %p, %x)\n", chan, cbfunc, cbstate);
+#endif
+
+    if (deviceToUse == NULL)
+        return adp_device_not_open;
+
+    if (invalidChannelID(chan))
+        return adp_bad_channel_id;
+
+    if (cbfunc == NULL)
+    {
+        channels[chan].callback = DummyCallback;
+        channels[chan].callback_state = NULL;
+    }
+    else
+    {
+        channels[chan].callback = cbfunc;
+        channels[chan].callback_state = cbstate;
+    }
+
+    return adp_ok;
+}
+
+AdpErrs Adp_ChannelRead(const ChannelID chan, Packet **packet)
+{
+    struct Channel *ch;
+
+#ifdef DEBUG
+    printf("Adp_ChannelRead(%d, %x)\n", chan, *packet);
+#endif
+
+    if (deviceToUse == NULL)
+        return adp_device_not_open;
+
+    if (invalidChannelID(chan))
+        return adp_bad_channel_id;
+
+    /*
+     * if a callback has already been registered for this
+     * channel, then we do not allow this blocking read.
+     */
+    ch = channels + chan;
+    if (ch->callback != DummyCallback)
+        return adp_callback_already_registered;
+
+    /*
+     * OK, use our own callback to wait for a packet to arrive
+     * on this channel
+     */
+    ch->callback = BlockingCallback;
+    ch->callback_state = packet;
+    *packet = NULL;
+
+    /*
+     * keep polling until a packet appears for this channel
+     */
+    while (((volatile Packet *)(*packet)) == NULL)
+        /*
+         * this call will block until a packet is read on any channel
+         */
+        Adp_AsynchronousProcessing(async_block_on_read);
+
+    /*
+     * OK, the packet has arrived: clear the callback
+     */
+    ch->callback = DummyCallback;
+    ch->callback_state = NULL;
+
+    return adp_ok;
+}
+
+static AdpErrs ChannelWrite(
+    const ChannelID chan, Packet *packet, AsyncMode mode)
+{
+    struct Channel *ch;
+    unsigned char *cptr;
+
+#ifdef DEBUG
+    printf( "Adp_ChannelWrite(%d, %x)\n", chan, packet );
+#endif
+
+    if (deviceToUse == NULL)
+        return adp_device_not_open;
+
+    if (invalidChannelID(chan))
+        return adp_bad_channel_id;
+
+    /*
+     * fill in the channels header at the start of this buffer
+     */
+    ch = channels + chan;
+    cptr = packet->pk_buffer;
+    *cptr++ = chan;
+    *cptr = 0;
+    packet->pk_length += CHAN_HEADER_SIZE;
+
+    /*
+     * OK, add this packet to the write queue, and try to flush it out
+     */
+
+    Adp_addToQueue(&writeQueueSend, packet);
+    Adp_AsynchronousProcessing(mode);
+
+    return adp_ok;
+}
+
+AdpErrs Adp_ChannelWrite(const ChannelID chan, Packet *packet) {
+  return ChannelWrite(chan, packet, async_block_on_write);
+}
+
+AdpErrs Adp_ChannelWriteAsync(const ChannelID chan, Packet *packet) {
+  return ChannelWrite(chan, packet, async_block_on_nothing);
+}
+
+static AdpErrs send_resend_msg(DeviceID devid) {
+
+  /*
+   * Send a resend message, usually in response to a bad packet or
+   * a resend request */
+  Packet * packet;
+  packet = DevSW_AllocatePacket(CF_DATA_BYTE_POS);
+  packet->pk_buffer[CF_CHANNEL_BYTE_POS] = CI_PRIVATE;
+  packet->pk_buffer[CF_HOME_SEQ_BYTE_POS] = HomeSeq;
+  packet->pk_buffer[CF_OPPO_SEQ_BYTE_POS] = OppoSeq;
+  packet->pk_buffer[CF_FLAGS_BYTE_POS] = CF_RELIABLE | CF_RESEND;
+  packet->pk_length = CF_DATA_BYTE_POS;
+  return DevSW_Write(deviceToUse, packet, devid);
+}
+
+static AdpErrs check_seq(unsigned char msg_home, unsigned char msg_oppo) {
+  Packet *tmp_pkt;
+
+  UNUSED(msg_oppo);
+  /* 
+   * check if we have got an ack for anything and if so remove it from the
+   * queue
+   */
+  if (msg_home == (unsigned char)(OppoSeq+1)) {
+    /*
+     * arrived in sequence can increment our opposing seq number and remove
+     * the relevant packet from our queue
+     * check that the packet we're going to remove really is the right one
+     */
+    tmp_pkt = writeQueueRoot;
+    while ((tmp_pkt->pk_next != NULL) &&
+           (tmp_pkt->pk_next->pk_buffer[CF_HOME_SEQ_BYTE_POS]
+            != OppoSeq)){
+      tmp_pkt = tmp_pkt->pk_next;
+    }
+    OppoSeq++;
+    if (tmp_pkt->pk_next == NULL) {
+#ifdef DEBUG
+      printf("trying to remove a non existant packet\n");
+#endif
+      return adp_bad_packet;
+    }
+    else {
+      Packet *tmp = tmp_pkt->pk_next;
+#ifdef RET_DEBUG
+      printf("removing a packet from the root queue\n");
+#endif
+      tmp_pkt->pk_next = tmp_pkt->pk_next->pk_next;
+      /* remove the appropriate packet */
+      DevSW_FreePacket(tmp);
+    return adp_ok;
+    }
+  }
+  else if (msg_home < (unsigned char) (OppoSeq+1)){
+    /* already received this message */
+#ifdef RET_DEBUG
+    printf("sequence numbers low\n");
+#endif   
+    return adp_seq_low;
+  }
+  else {  /* we've missed something */
+#ifdef RET_DEBUG
+    printf("sequence numbers high\n");
+#endif   
+    return adp_seq_high;
+  }
+}
+
+static unsigned long tv_diff(const struct timeval *time_now, 
+                             const struct timeval *time_was)
+{
+    return (  ((time_now->tv_sec * 1000000) + time_now->tv_usec)
+            - ((time_was->tv_sec * 1000000) + time_was->tv_usec) );
+}
+
+#if !defined(__unix) && !defined(__CYGWIN32__)
+static void gettimeofday( struct timeval *time_now, void *dummy )
+{
+    time_t t = clock();
+    UNUSED(dummy);
+    time_now->tv_sec = t/CLOCKS_PER_SEC;
+    time_now->tv_usec = (t%CLOCKS_PER_SEC)*(1000000/CLOCKS_PER_SEC);
+}
+#endif
+
+static AdpErrs pacemaker(void)
+{
+  Packet *packet;
+
+  packet = DevSW_AllocatePacket(CF_DATA_BYTE_POS);
+  if (packet == NULL) {
+    printf("ERROR: could not allocate a packet in pacemaker()\n");
+    return adp_malloc_failure;
+  }
+  packet->pk_buffer[CF_CHANNEL_BYTE_POS] = CI_PRIVATE;
+  packet->pk_buffer[CF_HOME_SEQ_BYTE_POS] = HomeSeq;
+  packet->pk_buffer[CF_OPPO_SEQ_BYTE_POS] = OppoSeq;
+  packet->pk_buffer[CF_FLAGS_BYTE_POS] = CF_RELIABLE | CF_HEARTBEAT;
+  packet->pk_length = CF_DATA_BYTE_POS;
+  return DevSW_Write(deviceToUse, packet, DC_DBUG);
+}  
+
+#ifdef FAKE_BAD_LINE_RX
+static AdpErrs fake_bad_line_rx( const Packet *const packet, AdpErrs adp_err )
+{
+    static unsigned int bl_num = 0;
+
+    if (     (packet != NULL)
+          && (bl_num++ >= 20 )
+          && ((bl_num % FAKE_BAD_LINE_RX) == 0))
+    {
+        printf("DEBUG: faking a bad packet\n");
+        return adp_bad_packet;
+    }
+    return adp_err;
+}
+#endif /* def FAKE_BAD_LINE_RX */
+
+#ifdef FAKE_BAD_LINE_TX
+static unsigned char tmp_ch;
+
+static void fake_bad_line_tx( void )
+{
+    static unsigned int bl_num = 0;
+
+    /* give the thing a chance to boot then try corrupting stuff */
+    if ( (bl_num++ >= 20) && ((bl_num % FAKE_BAD_LINE_TX) == 0)) 
+    {
+        printf("DEBUG: faking a bad packet for tx\n");
+        tmp_ch = writeQueueSend->pk_buffer[CF_FLAGS_BYTE_POS];
+        writeQueueSend->pk_buffer[CF_FLAGS_BYTE_POS] = 77;
+    }
+}
+
+static void unfake_bad_line_tx( void )
+{
+    static unsigned int bl_num = 0;
+
+    /*
+     * must reset the packet so that its not corrupted when we
+     *  resend it 
+     */   
+    if ( (bl_num >= 20) && ((bl_num % FAKE_BAD_LINE_TX) != 0))
+    {
+        writeQueueSend->pk_buffer[CF_FLAGS_BYTE_POS] = tmp_ch;
+    }
+}
+#endif /* def FAKE_BAD_LINE_TX */
+
+/*
+ * NOTE: we are assuming that a resolution of microseconds will
+ * be good enough for the purporses of the heartbeat.  If this proves
+ * not to be the case then we may need a rethink, possibly using
+ * [get,set]itimer
+ */
+static struct timeval time_now;
+static struct timeval time_lastalive;
+
+static void async_process_dbug_read( const AsyncMode mode,
+                                     bool *const finished  )
+{
+    Packet *packet;
+    unsigned int msg_home, msg_oppo;
+    AdpErrs adp_err;
+
+    adp_err = DevSW_Read(deviceToUse, DC_DBUG, &packet,
+                         mode == async_block_on_read    );
+
+#ifdef FAKE_BAD_LINE_RX
+    adp_err = fake_bad_line_rx( packet, adp_err );
+#endif
+
+    if (adp_err == adp_bad_packet) {
+        /* We got a bad packet, ask for a resend, send a resend message */
+#ifdef DEBUG
+        printf("received a bad packet\n");
+#endif
+        send_resend_msg(DC_DBUG);
+    }
+    else if (packet != NULL)
+    {
+        /* update the heartbeat clock */
+        gettimeofday(&time_lastalive, NULL);
+
+            /*
+             * we got a live one here - were we waiting for it?
+             */
+        if (mode == async_block_on_read)
+           /* not any more */
+           *finished = TRUE;
+#ifdef RETRANS
+
+        if (packet->pk_length < CF_DATA_BYTE_POS) {
+            /* we've got a packet with no header information! */
+            printf("ERROR: packet with no transport header\n");
+            send_resend_msg(DC_DBUG);
+        }
+        else {
+#ifdef RET_DEBUG
+            unsigned int c;
+#endif
+            /*
+             * TODO: Check to see if its acknowledgeing anything, remove
+             * those packets it is from the queue.  If its a retrans add the
+             * packets to the queue
+             */
+            msg_home = packet->pk_buffer[CF_HOME_SEQ_BYTE_POS];
+            msg_oppo = packet->pk_buffer[CF_OPPO_SEQ_BYTE_POS];
+#ifdef RET_DEBUG
+            printf("msg seq numbers are hseq 0x%x oseq 0x%x\n",
+                   msg_home, msg_oppo);
+            for (c=0;c<packet->pk_length;c++)
+               printf("%02.2x", packet->pk_buffer[c]);
+            printf("\n");
+#endif
+            /* now was it a resend request? */
+            if ((packet->pk_buffer[CF_FLAGS_BYTE_POS]) 
+                & CF_RESEND) {
+                /* we've been asked for a resend so we had better resend */
+                /*
+                 * I don't think we can use a resend as acknowledgement for
+                 * anything so lets not do this for the moment
+                 * check_seq(msg_home, msg_oppo);
+                 */
+#ifdef RET_DEBUG
+                printf("received a resend request\n");
+#endif
+                if (HomeSeq != msg_oppo) {
+                    int found = FALSE;
+                    /* need to resend from msg_oppo +1 upwards */
+                    DevSW_FreePacket(packet);
+                    resending = TRUE;
+                    /* find the correct packet to resend from */
+                    packet = writeQueueRoot;
+                    while (((packet->pk_next) != NULL) && !found) {
+                        if ((packet->pk_buffer[CF_OPPO_SEQ_BYTE_POS])
+                            != msg_oppo+1) {
+                            resend_pkt = packet;
+                            found = TRUE;
+                        }
+                        packet = packet->pk_next;
+                    }
+                    if (!found) {
+                        panic("trying to resend non-existent packets\n");
+                    }
+                }
+                else if (OppoSeq != msg_home) {
+                    /* 
+                     * send a resend request telling the target where we think
+                     * the world is at 
+                     */
+                    DevSW_FreePacket(packet);
+                    send_resend_msg(DC_DBUG);
+                }
+            }
+            else {
+                /* not a resend request, lets check the sequence numbers */
+                
+                if ((packet->pk_buffer[CF_CHANNEL_BYTE_POS] != CI_HBOOT) &&
+                    (packet->pk_buffer[CF_CHANNEL_BYTE_POS] != CI_TBOOT)) {
+                    adp_err = check_seq(msg_home, msg_oppo);
+                    if (adp_err == adp_seq_low) {
+                        /* we have already received this packet so discard */
+                        DevSW_FreePacket(packet);
+                    }
+                    else if (adp_err == adp_seq_high) {
+                        /*
+                         * we must have missed a packet somewhere, discard this 
+                         * packet and tell the target where we are
+                         */
+                        DevSW_FreePacket(packet);
+                        send_resend_msg(DC_DBUG);
+                    }
+                    else
+                       /*
+                        * now pass the packet to whoever is waiting for it
+                        */
+                       FireCallback(packet);
+                }
+                else
+                   FireCallback(packet);
+            }
+        }
+#else
+        /*
+             * now pass the packet to whoever is waiting for it
+             */
+        FireCallback(packet);
+#endif
+    }
+}
+
+static void async_process_appl_read(void)
+{
+    Packet *packet;
+    AdpErrs adp_err;
+
+    /* see if there is anything for the DC_APPL channel */
+    adp_err = DevSW_Read(deviceToUse, DC_APPL, &packet, FALSE);
+
+    if (adp_err == adp_ok && packet != NULL)
+    {
+        /* got an application packet on a shared device */
+
+#ifdef DEBUG
+        printf("GOT DC_APPL PACKET: len %d\nData: ", packet->pk_length);
+        {
+            unsigned int c;
+            for ( c = 0; c < packet->pk_length; ++c )
+               printf( "%02X ", packet->pk_buffer[c] );
+        }
+        printf("\n");
+#endif
+
+        if (dc_appl_handler != NULL)
+        {
+            dc_appl_handler( deviceToUse, packet );
+        }
+        else
+        {
+            /* for now, just free it!! */
+#ifdef DEBUG
+            printf("no handler - dropping DC_APPL packet\n");
+#endif
+            DevSW_FreePacket( packet );
+        }
+    }
+}
+
+static void async_process_write( const AsyncMode mode,
+                                 bool *const finished  )
+{
+    Packet *packet;
+
+#ifdef DEBUG
+    static unsigned int num_written = 0;
+#endif
+
+    /*
+     * NOTE: here we rely in the fact that any packet in the writeQueueSend
+     * section of the queue will need its sequence number setting up while
+     * and packet in the writeQueueRoot section will have its sequence
+     * numbers set up from when it was first sent so we can easily look
+     * up the packet numbers when(if) we want to resend the packet.
+     */
+
+#ifdef DEBUG
+    if (writeQueueSend!=NULL)
+       printf("written 0x%x\n",num_written += writeQueueSend->pk_length);
+#endif
+    /*
+     * give the switcher a chance to complete any partial writes
+     */
+    if (DevSW_FlushPendingWrite(deviceToUse) == adp_write_busy)
+    {
+        /* no point trying a new write */
+        return;
+    }
+      
+    /*
+     * now see whether there is anything to write
+     */
+    packet = NULL;
+    if (resending) {
+        packet = resend_pkt;
+#ifdef RET_DEBUG
+        printf("resending hseq 0x%x oseq 0x%x\n", 
+               packet->pk_buffer[CF_HOME_SEQ_BYTE_POS],
+               packet->pk_buffer[CF_OPPO_SEQ_BYTE_POS]);
+#endif
+    }
+    else if (writeQueueSend != NULL) {
+#ifdef RETRANS
+        /* set up the sequence number on the packet */
+        packet = writeQueueSend;
+        HomeSeq++;
+        (writeQueueSend->pk_buffer[CF_OPPO_SEQ_BYTE_POS])
+            = OppoSeq;
+        (writeQueueSend->pk_buffer[CF_HOME_SEQ_BYTE_POS])
+            = HomeSeq;
+        (writeQueueSend->pk_buffer[CF_FLAGS_BYTE_POS])
+            = CF_RELIABLE;
+# ifdef RET_DEBUG
+        printf("sending packet with hseq 0x%x oseq 0x%x\n",
+               writeQueueSend->pk_buffer[CF_HOME_SEQ_BYTE_POS],
+               writeQueueSend->pk_buffer[CF_OPPO_SEQ_BYTE_POS]);
+# endif
+#endif /* RETRANS */
+    }
+
+    if (packet != NULL) {
+        AdpErrs dev_err;
+
+#ifdef FAKE_BAD_LINE_TX
+        fake_bad_line_tx();
+#endif
+
+        dev_err = DevSW_Write(deviceToUse, packet, DC_DBUG);
+        if (dev_err == adp_ok) {
+#ifdef RETRANS
+            if (resending) {
+                /* check to see if we've recovered yet */
+                if ((packet->pk_next) == NULL){
+# ifdef RET_DEBUG
+                    printf("we have recovered\n");
+# endif
+                    resending = FALSE;
+                }
+                else {
+                    resend_pkt = resend_pkt->pk_next;
+                }
+            }
+            else {
+                /* 
+                 * move the packet we just sent from the send queue to the root
+                 */
+                Packet *tmp_pkt, *tmp;
+
+# ifdef FAKE_BAD_LINE_TX
+                unfake_bad_line_tx();
+# endif
+
+                tmp_pkt = writeQueueSend;
+                writeQueueSend = writeQueueSend->pk_next;
+                tmp_pkt->pk_next = NULL;
+                if (writeQueueRoot == NULL)
+                   writeQueueRoot = tmp_pkt;
+                else {
+                    tmp = writeQueueRoot;
+                    while (tmp->pk_next != NULL) {
+                        tmp = tmp->pk_next;
+                    }
+                    tmp->pk_next = tmp_pkt;
+                }
+            }
+#else  /* not RETRANS */
+            /*
+             * switcher has taken the write, so remove it from the
+             * queue, and free its resources
+             */
+            DevSW_FreePacket(Adp_removeFromQueue(&writeQueueSend));
+#endif /* if RETRANS ... else ... */
+
+            if (mode == async_block_on_write)
+               *finished = DevSW_WriteFinished(deviceToUse);
+
+        } /* endif write ok */
+    }
+    else /* packet == NULL */
+    {
+        if (mode == async_block_on_write)
+           *finished = DevSW_WriteFinished(deviceToUse);
+    }
+}
+
+static void async_process_heartbeat( void )
+{
+    /* check to see whether we need to send a heartbeat */
+    gettimeofday(&time_now, NULL);
+
+    if (tv_diff(&time_now, &time_lastalive) >= HEARTRATE)
+    {
+        /*
+         * if we've not booted then don't do send a heartrate the link
+         * must be reliable enough for us to boot without any clever stuff,
+         * if we can't do this then theres little chance of the link staying
+         * together even with the resends etc
+         */
+        if (heartbeat_enabled) {
+            gettimeofday(&time_lastalive, NULL);
+            pacemaker();
+        }
+    }
+}
+
+static void async_process_callbacks( void )
+{
+    /* call any registered asynchronous callbacks */
+    unsigned int i;
+    for ( i = 0; i < num_async_callbacks; ++i )
+       async_callbacks[i]( deviceToUse, &time_now );
+}
+
+void Adp_AsynchronousProcessing(const AsyncMode mode)
+{
+    bool finished = FALSE;
+#ifdef DEBUG
+    unsigned int wc = 0, dc = 0, ac = 0, hc = 0;
+# define INC_COUNT(x) ((x)++)
+#else
+# define INC_COUNT(x)
+#endif
+
+    if ((time_lastalive.tv_sec == 0) && (time_lastalive.tv_usec == 0)) {
+      /* first time through, needs initing */
+      gettimeofday(&time_lastalive, NULL);
+    }
+
+    /* main loop */
+    do
+    {
+        async_process_write( mode, &finished );
+        INC_COUNT(wc);
+
+        if ( ! finished && mode != async_block_on_write )
+        {
+            async_process_dbug_read( mode, &finished );
+            INC_COUNT(dc);
+        }
+
+        if ( ! finished && mode != async_block_on_write )
+        {
+           async_process_appl_read();
+           INC_COUNT(ac);
+        }
+
+        if ( ! finished )
+        {
+          if (heartbeat_configured)
+            async_process_heartbeat();
+          async_process_callbacks();
+          INC_COUNT(hc);
+        }
+
+    } while (!finished && mode != async_block_on_nothing);
+
+#ifdef DEBUG
+    if ( mode != async_block_on_nothing )
+       printf( "Async: %s - w %d, d %d, a %d, h %d\n",
+               mode == async_block_on_write ? "blk_write" : "blk_read",
+               wc, dc, ac, hc );
+#endif
+}
+
+/*
+ * install a handler for DC_APPL packets (can be NULL), returning old one.
+ */
+DC_Appl_Handler Adp_Install_DC_Appl_Handler(const DC_Appl_Handler handler)
+{
+    DC_Appl_Handler old_handler = dc_appl_handler;
+
+#ifdef DEBUG
+    printf( "Installing DC_APPL handler %x (old %x)\n", handler, old_handler );
+#endif
+
+    dc_appl_handler = handler;
+    return old_handler;
+}
+
+
+/*
+ * add an asynchronous processing callback to the list
+ * TRUE == okay, FALSE == no more async processing slots
+ */
+bool Adp_Install_Async_Callback( const Adp_Async_Callback callback_proc )
+{
+    if ( num_async_callbacks < MAX_ASYNC_CALLBACKS && callback_proc != NULL )
+    {
+        async_callbacks[num_async_callbacks] = callback_proc;
+        ++num_async_callbacks;
+        return TRUE;
+    }
+    else
+       return FALSE;
+}
+
+
+/*
+ * delay for a given period (in microseconds)
+ */
+void Adp_delay(unsigned int period)
+{
+    struct timeval tv;
+
+#ifdef DEBUG
+    printf("delaying for %d microseconds\n", period);
+#endif
+    tv.tv_sec = (period / 1000000);
+    tv.tv_usec = (period % 1000000);
+
+    (void)select(0, NULL, NULL, NULL, &tv);
+}
+
+/* EOF hostchan.c */
diff --git a/gdb/rdi-share/hostchan.h b/gdb/rdi-share/hostchan.h
new file mode 100644
index 0000000..44563a6
--- /dev/null
+++ b/gdb/rdi-share/hostchan.h
@@ -0,0 +1,308 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+#ifndef angsd_hostchan_h
+#define angsd_hostchan_h
+
+/* If under Cygwin, provide backwards compatibility with older
+   Cygwin compilers that don't define the current cpp define. */
+#ifdef __CYGWIN32__
+#ifndef __CYGWIN__
+#define __CYGWIN__
+#endif
+#endif
+
+/* struct timeval */
+#if defined(__unix) || defined(__CYGWIN32__)
+#  include <sys/time.h>
+#else
+#  include "winsock.h"
+#  include "time.h"
+#endif
+
+#include "chandefs.h"
+#include "adperr.h"
+#include "devsw.h"
+
+/*
+ * asynchronous processing modes
+ */
+enum AsyncMode
+{
+    async_block_on_nothing,
+    async_block_on_read,
+    async_block_on_write
+};
+
+#ifndef __cplusplus
+typedef enum AsyncMode AsyncMode;
+#endif
+
+/*
+ * prototype for channels callback function
+ */
+typedef void (*ChannelCallback)(Packet *packet, void *state);
+
+/*
+ *  Function: Adp_initSeq
+ *   Purpose: initialise the channel protocol and sequence numbers
+ *
+ *    Params: none
+ *
+ *   Returns: Nothing
+ */
+extern void Adp_initSeq(void);
+
+/*
+ *  Function: Adp_addToQueue
+ *   Purpose: chain a Packet to the end of a linked list of such structures
+ *
+ *    Params:
+ *      In/Out: head    Head of the linked list
+ *
+ *              newpkt  Packet to be chained onto the list
+ *
+ *   Returns: Nothing
+ */
+extern void Adp_addToQueue(Packet **head, Packet *newpkt);
+
+/*
+ *  Function: removeFromQueue
+ *   Purpose: remove a Packet from the head of a linked list of such structures
+ *
+ *    Params:
+ *      In/Out: head    Head of the linked list
+ *
+ *   Returns: Old head from the linked list
+ *
+ * Post-conditions: Second element in the list will be the new head.
+ */
+
+extern Packet *Adp_removeFromQueue(Packet **head);
+
+/*
+ *  Function: Adp_OpenDevice
+ *   Purpose: Open a device to use for channels communication.  This is a
+ *              very thin veneer to the device drivers: what hostchan.c
+ *              will do is call DeviceMatch for each device driver until it
+ *              finds a driver that will accept name and arg, then call
+ *              DeviceOpen for that device.
+ *
+ *  Pre-conditions: No previous open is still active
+ *
+ *    Params:
+ *       Input: name    Identifies which device to open.  This can either be
+ *                      a host specific identifier (e.g. "/dev/ttya",
+ *                      "COM1:"), or a number which is used to refer to
+ *                      `standard' interfaces, so "1" would be the first host
+ *                      interface, "2" the second, and so on.
+ *
+ *              arg     Driver specific arguments.  For example, some serial
+ *                      drivers accept speed and control arguments such as
+ *                      "9600" or "19200/NO_BREAK".  These arguments are
+ *                      completely free-form: it is the individual drivers
+ *                      which do the necessary interpretation.
+ *
+ *              heartbeat_on  Incicates if the heartbeat is configured to be 
+ *                      used or not, true if it is, false otherwise
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_known,
+ *              adp_device_open_failed
+ *              adp_device_already_open
+ */
+AdpErrs Adp_OpenDevice(const char *name, const char *arg,
+                       unsigned int heartbeat_on);
+
+/*
+ *  Function: Adp_CloseDevice
+ *   Purpose: Close the device used for channels communication.
+ *
+ *    Params: None
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ */
+AdpErrs Adp_CloseDevice(void);
+
+/*
+ *  Function: Adp_Ioctl
+ *   Purpose: Perform miscellaneous control operations on
+ *              the device used for channels communication.
+ *              This is a minimal veneer to DevSW_Ioctl.
+ *
+ *    Params:
+ *       Input: opcode  Reason code indicating the operation to perform.
+ *      In/Out: args    Pointer to opcode-sensitive arguments/result space.
+ *
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open, adp_failed
+ */
+AdpErrs Adp_Ioctl(int opcode, void *args);
+
+/*
+ *  Function: Adp_ChannelRegisterRead
+ *   Purpose: Register a callback function for received packets on a given
+ *              channel
+ *
+ *    Params:
+ *       Input: chan    The channel the callback function is for.
+ *
+ *              cbfunc  The callback function.  If NULL, then the current
+ *                      callback is removed.
+ *
+ *              cbstate State pointer to pass into the callback function
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ *              adp_bad_channel_id
+ *
+ * Post-conditions: The callback function is responsible for freeing the
+ *                      packet that is passed to it, when that packet is
+ *                      no longer needed.
+ */
+#ifdef __cplusplus
+    extern "C" {
+#endif
+
+    
+extern AdpErrs Adp_ChannelRegisterRead(const ChannelID chan,
+                               const ChannelCallback cbfunc,
+                                void *cbstate);
+
+#ifdef __cplusplus
+    }
+#endif
+/*
+ *  Function: Adp_ChannelRead
+ *   Purpose: Wait until a packet has been read for a given channel, and
+ *              then return it.  Callbacks for other channels are still
+ *              active while this read is blocking.
+ *
+ *  Pre-conditions: No callback has been already been registered for
+ *                      the channel.
+ *
+ *    Params:
+ *       Input: chan    The channel to read.
+ *
+ *      Output: packet  The received packet.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ *              adp_bad_channel_id
+ *              adp_callback_already_registered
+ *
+ * Post-conditions: The calling function is responsible for freeing the
+ *                      received packet, when that packet is no longer
+ *                      needed.
+ */
+AdpErrs Adp_ChannelRead(const ChannelID chan, Packet **packet);
+
+/*
+ *  Function: Adp_ChannelWrite
+ *   Purpose: Write a packet to the given channel
+ *
+ *  Pre-conditions: Channel must have been previously opened.
+ *
+ *    Params:
+ *       Input: chan    The channel to write.
+ *
+ *              packet  The packet to write.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ *              adp_bad_channel_id
+ *
+ * Post-conditions: The packet being written becomes the "property" of
+ *                      Adp_ChannelWrite, which is responsible for freeing
+ *                      the packet when it is no longer needed.
+ */
+AdpErrs Adp_ChannelWrite(const ChannelID chan, Packet *packet);
+
+/*
+ *  Function: Adp_ChannelWriteAsync
+ *   Purpose: Write a packet to the given channel, but don't wait
+ *            for the write to complete before returning.
+ *
+ *  Pre-conditions: Channel must have been previously opened.
+ *
+ *    Params:
+ *       Input: chan    The channel to write.
+ *
+ *              packet  The packet to write.
+ *
+ *   Returns:
+ *          OK: adp_ok
+ *       Error: adp_device_not_open
+ *              adp_bad_channel_id
+ *
+ * Post-conditions: The packet being written becomes the "property" of
+ *                      Adp_ChannelWrite, which is responsible for freeing
+ *                      the packet when it is no longer needed.
+ */
+AdpErrs Adp_ChannelWriteAsync(const ChannelID chan, Packet *packet);
+
+/*
+ *  Function: Adp_AsynchronousProcessing
+ *   Purpose: This routine should be called from persistent any idle loop
+ *              to give the data I/O routines a chance to poll for packet
+ *              activity.  Depending upon the requested mode, this routine
+ *              may, or may not, block.
+ *
+ *    Params:
+ *       Input: mode    Specifies whether to block until a complete packet
+ *                      has been read, all pending writes have completed,
+ *                      or not to block at all.
+ *
+ *   Returns: Nothing.
+ */
+void Adp_AsynchronousProcessing(const AsyncMode mode);
+
+/*
+ * prototype for DC_APPL packet handler
+ */
+typedef void (*DC_Appl_Handler)(const DeviceDescr *device, Packet *packet);
+
+/*
+ * install a handler for DC_APPL packets (can be NULL), returning old one.
+ */
+DC_Appl_Handler Adp_Install_DC_Appl_Handler(const DC_Appl_Handler handler);
+
+/*
+ * prototype for asynchronous processing callback
+ */
+typedef void (*Adp_Async_Callback)(const DeviceDescr *device,
+                                   const struct timeval *const time_now);
+
+/*
+ * add an asynchronous processing callback to the list
+ * TRUE == okay, FALSE == no more async processing slots
+ */
+bool Adp_Install_Async_Callback( const Adp_Async_Callback callback_proc );
+
+/*
+ * delay for a given period (in microseconds)
+ */
+void Adp_delay(unsigned int period);
+
+#endif /* ndef angsd_hostchan_h */
+
+/* EOF hostchan.h */
diff --git a/gdb/rdi-share/hsys.c b/gdb/rdi-share/hsys.c
new file mode 100644
index 0000000..ef42a30
--- /dev/null
+++ b/gdb/rdi-share/hsys.c
@@ -0,0 +1,915 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * Host C Library support functions.
+ *
+ * $Revision$
+ *     $Date$
+ */
+
+#ifdef DEBUG
+#  include <ctype.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <time.h>
+
+#include "adp.h"
+#include "host.h"
+#include "ardi.h"
+#include "buffers.h"
+#include "channels.h"        /* Channel interface. */
+#include "endian.h"
+#include "logging.h"         /* Angel support functions. */
+#include "msgbuild.h"
+#include "sys.h"    
+#include "hsys.h"      /* Function and structure declarations. */
+#include "hostchan.h"
+
+#define FILEHANDLE int
+
+/* Note: no statics allowed.  All globals must be malloc()ed on the heap.
+   The state struct is used for this purpose.  See 'hsys.h'.                */
+/* This is the message handler function passed to the channel manager in
+   HostSysInit.  It is called whenever a message is received. 'buffptr'
+   points to the message body.  Functionality is provided by the debugger
+   toolkit.  The routine is very loosely based on the HandleSWI routine from
+   armos.c in the armulator source.                                         */
+/* These routines could be tested by providing a simple interface to armsd, 
+   and running them in that.   */
+
+
+/* taken staight from armulator source */
+#ifdef __riscos
+  extern int _fisatty(FILE *);
+# define isatty_(f) _fisatty(f)
+# define EMFILE -1
+# define EBADF -1
+  int _kernel_escape_seen(void) { return 0 ;}
+#else
+# if defined(_WINDOWS) || defined(_CONSOLE)
+#   define isatty_(f) (f == stdin || f == stdout)
+# else
+#   ifdef __ZTC__
+#     include <io.h>
+#     define isatty_(f) isatty((f)->_file)
+#   else
+#     ifdef macintosh
+#       include <ioctl.h>
+#       define isatty_(f) (~ioctl((f)->_file,FIOINTERACTIVE,NULL))
+#     else
+#       define isatty_(f) isatty(fileno(f))
+#     endif
+#   endif
+# endif
+#endif
+
+/* Set up the state block, filetable and register the C lib callback fn */
+int HostSysInit(const struct Dbg_HostosInterface *hostif, char **cmdline,
+                hsys_state **stateptr)
+{
+  ChannelCallback HandleMessageFPtr = (ChannelCallback) HandleSysMessage;
+  int i;
+  *stateptr = (hsys_state *)malloc(sizeof(hsys_state));
+
+  if (*stateptr == NULL) return RDIError_OutOfStore;
+
+  (*stateptr)->hostif=hostif;
+  (*stateptr)->last_errno=0;
+  (*stateptr)->OSptr=(OSblock *)malloc(sizeof(OSblock));
+  if ((*stateptr)->OSptr == NULL) return RDIError_OutOfStore;
+  for (i=0; i<UNIQUETEMPS; i++) (*stateptr)->OSptr->TempNames[i]=NULL;
+  for (i=0; i<HSYS_FOPEN_MAX; i++) {
+       (*stateptr)->OSptr->FileTable[i]=NULL;
+       (*stateptr)->OSptr->FileFlags[i]=0;
+  }
+  (*stateptr)->CommandLine=cmdline;
+
+  return Adp_ChannelRegisterRead(CI_CLIB, (ChannelCallback)HandleMessageFPtr,
+                                 *stateptr);
+}
+
+/* Shut down the Clib support, this will probably never get called though */
+int HostSysExit(hsys_state *stateptr)
+{
+  free(stateptr->OSptr);
+  free(stateptr);
+  return RDIError_NoError;
+}
+
+#ifdef DEBUG
+static void DebugCheckNullTermString(char *prefix, bool nl,
+                                     unsigned int len, unsigned char *strp)
+{
+    printf("%s: %d: ", prefix, len);
+    if (strp[len]=='\0')
+       printf("\"%s\"", strp);
+    else
+       printf("NOT NULL TERMINATED");
+    if (nl)
+       printf("\n");
+    else
+    {
+        printf(" ");
+        fflush(stdout);
+    }
+}
+
+extern int sys_nerr;
+extern char *sys_errlist[];
+
+static char *DebugStrError(int last_errno)
+{
+    if (last_errno < sys_nerr)
+       return sys_errlist[last_errno];
+    else
+       return "NO MSG (errno>sys_nerr)";
+}
+
+static void DebugCheckErr(char *prefix, bool nl, int err, int last_errno)
+{
+    printf("\t%s: returned ", prefix);
+    if (err == 0)
+       printf("okay");
+    else
+       printf("%d, errno = %d \"%s\"", err, last_errno,
+              DebugStrError(last_errno));
+    if (nl)
+       printf("\n");
+    else
+    {
+        printf(" ");
+        fflush(stdout);
+    }
+}
+
+static void DebugCheckNonNull(char *prefix, bool nl,
+                              void *handle, int last_errno)
+{
+    printf("\t%s: returned ", prefix);
+    if (handle != NULL)
+       printf("okay [%08x]", (unsigned int)handle);
+    else
+       printf("NULL, errno = %d \"%s\"", last_errno,
+              DebugStrError(last_errno));
+    if (nl)
+       printf("\n");
+    else
+    {
+        printf(" ");
+        fflush(stdout);
+    }
+}
+
+#define DebugPrintF(c) printf c;
+
+#else
+
+#define DebugCheckNullTermString(p, n, l, s)    ((void)(0))
+#define DebugCheckErr(p, n, e, l)               ((void)(0))
+#define DebugCheckNonNull(p, n, h, l)           ((void)(0))
+#define DebugPrintF(c)                          ((void)(0))
+
+#endif /* ifdef DEBUG ... else */
+
+static FILE *hsysGetRealFileHandle(hsys_state *stateptr, int fh, char *flags)
+{
+    FILE *file_p = NULL;
+
+    if (fh < 0 || fh >= HSYS_FOPEN_MAX)
+    {
+        stateptr->last_errno = EBADF;
+        DebugPrintF(("\tfh %d out-of-bounds!\n", fh));
+        return NULL;
+    }
+    else
+    {
+        file_p = stateptr->OSptr->FileTable[fh];
+        if (file_p != NULL) {
+            if (flags != NULL)
+               *flags = stateptr->OSptr->FileFlags[fh];
+        }
+        else {
+          stateptr->last_errno = EBADF;
+          DebugPrintF(("\tFileTable[%d] is NULL\n", fh));
+        }
+
+        return file_p;
+    }
+}
+
+int HandleSysMessage(Packet *packet, hsys_state *stateptr)
+{
+  unsigned int reason_code, mode, len, c, nbytes, nbtotal, nbtogo = 0;
+  long posn, fl;
+  char character;
+  int err;
+
+  /* Note: We must not free the buffer passed in as the callback handler */
+  /* expects to do this.  Freeing any other buffers we have malloced */
+  /* ourselves is acceptable */
+
+  unsigned char *buffp = ((unsigned char *)BUFFERDATA(packet->pk_buffer))+16;
+                                          /* buffp points to the parameters*/
+                                          /* the invidual messages, excluding*/
+                                          /* standard SYS fields (debugID, */
+                                          /* osinfo and reasoncode) */
+  unsigned char *buffhead = (unsigned char *)(packet->pk_buffer);
+
+  int DebugID, OSInfo1, OSInfo2, count;
+
+  const char* fmode[] = {"r","rb","r+","r+b",
+                               "w","wb","w+","w+b",
+                               "a","ab","a+","a+b",
+                               "r","r","r","r"} /* last 4 are illegal */ ;
+
+  FILEHANDLE fh;  /* fh is used as an index to the real file handle
+                         * in OSptr */  
+  FILE *fhreal;
+  unpack_message(BUFFERDATA(buffhead), "%w%w%w%w", &reason_code,
+                 &DebugID, &OSInfo1, &OSInfo2);
+                                        /* Extract reason code from buffer. */
+  reason_code &= 0xFFFF;        /* Strip away direction bit, OSInfo and     */
+                                /* DebugInfo fields.  Will want to do some  */
+                                /* sort of validation on this later.        */
+  
+  switch(reason_code)
+  {
+
+  case CL_WriteC:   /* Write a character to the terminal. */
+                    /* byte data -> word status           */
+    {
+#ifdef DEBUG
+      int c = (int)(*buffp);
+      printf("CL_WriteC: [%02x]>%c<", c, isprint(c) ? c : '.');
+#endif
+      stateptr->hostif->writec(stateptr->hostif->hostosarg, (int)(*buffp));
+      DevSW_FreePacket(packet);
+      return msgsend(CI_CLIB,"%w%w%w%w%w", CL_WriteC|HtoT,
+                    DebugID, OSInfo1, OSInfo2, NoError);
+    }
+
+  case CL_Write0:  /* Write a null terminated string to the terminal. */
+    {
+      unpack_message(buffp, "%w", &len);
+      DebugCheckNullTermString("CL_Write0", TRUE, len, buffp+4);
+      stateptr->hostif->write(stateptr->hostif->hostosarg,
+                              (char *) buffp+4, len);
+      DevSW_FreePacket(packet);
+      return msgsend(CI_CLIB, "%w%w%w%w%w", CL_Write0|HtoT, DebugID, 
+                    OSInfo1, OSInfo2, NoError);
+    }
+
+  case CL_ReadC:   /* Read a byte from the terminal */
+    {
+      DebugPrintF(("CL_ReadC: "));
+      DevSW_FreePacket(packet);
+
+      character = stateptr->hostif->readc(stateptr->hostif->hostosarg);
+      DebugPrintF(("\nCL_ReadC returning [%02x]>%c<\n", character,
+                   isprint(character) ? character : '.'));
+
+      return msgsend(CI_CLIB, "%w%w%w%w%w%b", CL_ReadC|HtoT,
+                    DebugID, OSInfo1, OSInfo2, NoError, character);
+    }
+
+  case CL_System:  /* Pass NULL terminated string to the hosts command 
+                    * interpreter. As it is nULL terminated we dont need
+                    * the length
+                    */
+    {
+      unpack_message(buffp, "%w", &len);
+      DebugCheckNullTermString("CL_System", TRUE, len, buffp+4);
+
+      err = system((char *)buffp+4); /* Use the string in the buffer */
+      stateptr->last_errno = errno;
+      DebugCheckErr("system", TRUE, err, stateptr->last_errno);
+
+      err = msgsend(CI_CLIB, "%w%w%w%w%w%w", CL_System|HtoT,
+                    DebugID, OSInfo1, OSInfo2, NoError, err);
+      DevSW_FreePacket(packet);
+      return err;
+    }
+
+  case CL_GetCmdLine:  /* Returns the command line used to call the program */
+    {
+      /* Note: we reuse the packet here, this may not always be desirable */
+      /* /* TODO: Use long buffers if possible */
+      DebugPrintF(("CL_GetCmdLine: \"%s\"\n", *(stateptr->CommandLine)));
+
+      if (buffhead!=NULL) {
+        len = strlen(*(stateptr->CommandLine));
+        if (len > Armsd_BufferSize-24) len = Armsd_BufferSize-24; 
+        packet->pk_length = len + msgbuild(BUFFERDATA(buffhead),
+                                           "%w%w%w%w%w%w", CL_GetCmdLine|HtoT,
+                                           DebugID, OSInfo1, OSInfo2,
+                                           NoError, len);
+        strncpy((char *) BUFFERDATA(buffhead)+24,*(stateptr->CommandLine),
+                len);
+        
+        Adp_ChannelWrite(CI_CLIB, packet);/* Send message. */
+        return 0;
+      }
+      else return -1;
+    }
+
+  case CL_Clock:   /* Return the number of centiseconds since the support */
+                   /* code started executing */
+    {
+      time_t retTime = time(NULL);
+      if (retTime == (time_t)-1)
+             stateptr->last_errno = errno;
+      else
+             retTime *=100;
+
+      DebugPrintF(("CL_Clock: %lu\n", retTime));
+      DebugCheckErr("time", TRUE, (retTime == (time_t)-1),
+                    stateptr->last_errno);
+
+      DevSW_FreePacket(packet);
+      return msgsend(CI_CLIB, "%w%w%w%w%w%w",CL_Clock|HtoT,
+                         DebugID, OSInfo1, OSInfo2, NoError, retTime);
+    }
+
+  case CL_Time:    /* return time, in seconds since the start of 1970 */
+    {
+      time_t retTime = time(NULL);
+      if (retTime == (time_t)-1)
+              stateptr->last_errno = errno;
+
+      DebugPrintF(("CL_Time: %lu\n", retTime));
+      DebugCheckErr("time", TRUE, (retTime == (time_t)-1),
+                    stateptr->last_errno);
+
+      DevSW_FreePacket(packet);
+      return msgsend(CI_CLIB,"%w%w%w%w%w%w",CL_Time|HtoT,
+                         DebugID, OSInfo1, OSInfo2, NoError, retTime);
+    }
+
+  case CL_Remove:  /* delete named in the null terminated string */
+    {
+      /* Removing an open file will cause problems but once again
+       * its not our problem, likely result is a tangled FileTable */
+      /* As the filename is passed with a null terminator we can use it
+       * straight out of the buffer without copying it.*/
+
+      unpack_message(buffp, "%w", &len);
+      DebugCheckNullTermString("CL_Remove", TRUE, len, buffp+4);
+
+      err=remove((char *)buffp+4);
+      stateptr->last_errno = errno;
+      DevSW_FreePacket(packet);
+      DebugCheckErr("remove", TRUE, err, stateptr->last_errno);
+
+      return msgsend(CI_CLIB, "%w%w%w%w%w", CL_Remove|HtoT,
+                     DebugID, OSInfo1, OSInfo2, err?-1:NoError);
+    }
+
+  case CL_Rename:  /* rename file */
+    {
+      /* Rename(word nbytes, bytes oname, word nbytes, bytes nname)
+      * return(byte status)
+      */
+      unsigned int len2;
+
+      unpack_message(buffp, "%w", &len);
+      DebugCheckNullTermString("CL_Rename", FALSE, len, buffp+4);
+      unpack_message(buffp+5+len, "%w", &len2);
+      DebugCheckNullTermString("to", TRUE, len2, buffp+9+len);
+
+      /* Both names are passed with null terminators so we can use them
+       * directly from the buffer. */
+      err = rename((char *)buffp+4, (char *)buffp+9+len);
+      stateptr->last_errno = errno;
+      DebugCheckErr("rename", TRUE, err, stateptr->last_errno);
+      DevSW_FreePacket(packet);
+
+      return msgsend(CI_CLIB, "%w%w%w%w%w",  CL_Rename|HtoT,
+                     DebugID, OSInfo1, OSInfo2, (err==0)? NoError : -1);
+    }
+  
+  case CL_Open:    /* open the file */
+    {
+      /* Open(word nbytes, bytes name, byte mode)
+      * return(word handle)
+      */
+      unpack_message(buffp, "%w", &len);
+      /* get the open mode */
+      unpack_message((buffp)+4+len+1, "%w", &mode);
+      DebugCheckNullTermString("CL_Open", FALSE, len, buffp+4);
+      DebugPrintF(("mode: %d\n", mode));
+
+      /* do some checking on the file first? */
+      /* check if its a tty */
+      if (strcmp((char *)buffp+4, ":tt")==0 && (mode==0||mode==1)) {
+        /* opening tty "r" */
+        fhreal = stdin;
+        stateptr->last_errno = errno;
+        DebugPrintF(("\tstdin "));
+      }
+      else if (strcmp((char *)buffp+4, ":tt")== 0 && (mode==4||mode==5)) {
+        /* opening tty "w" */
+        fhreal = stdout;
+        stateptr->last_errno = errno;
+        DebugPrintF(("\tstdout "));
+      }
+      else
+      {
+        fhreal = fopen((char *)buffp+4, fmode[mode&0xFF]);
+        stateptr->last_errno = errno;
+        DebugCheckNonNull("fopen", FALSE, fhreal, stateptr->last_errno);
+      }
+      DevSW_FreePacket(packet);
+
+      c = NONHANDLE;
+      if (fhreal != NULL) {
+        /* update filetable */
+        for (c=3; c < HSYS_FOPEN_MAX; c++) {
+          /* allow for stdin, stdout, stderr (!!! WHY? MJG) */
+          if (stateptr->OSptr->FileTable[c] == NULL) {
+            stateptr->OSptr->FileTable[c]= fhreal;
+            stateptr->OSptr->FileFlags[c]= mode & 1;
+            DebugPrintF(("fh: %d\n", c));
+            break;
+          }
+          else if (c == HSYS_FOPEN_MAX) {
+          /* no filehandles free */
+          DebugPrintF(("no free fh: %d\n", c));
+          stateptr->last_errno = EMFILE;
+          }
+        }
+      }
+      else {
+        /*        c = NULL;*/
+        DebugPrintF(("error fh: %d\n", c));
+      }
+      (void) msgsend(CI_CLIB, "%w%w%w%w%w",  CL_Open|HtoT,
+                     DebugID, OSInfo1, OSInfo2, c);
+      return 0;
+    }
+
+  case CL_Close:   /* close the file pointed to by the filehandle */
+    {
+      unpack_message(buffp, "%w", &fh);
+      DebugPrintF(("CL_Close: fh %d\n", fh));
+      DevSW_FreePacket(packet);
+
+      fhreal = hsysGetRealFileHandle(stateptr, fh, NULL);
+      if (fhreal == NULL)
+         err = -1;
+      else {
+          if (fhreal == stdin || fhreal == stdout || fhreal == stderr) {
+              stateptr->last_errno = errno;
+              DebugPrintF(("\tskipping close of std*\n"));
+              err = 0;
+          }
+          else {
+              err = fclose(fhreal);
+              if (err == 0)
+                 stateptr->OSptr->FileTable[fh]=NULL;
+              stateptr->last_errno = errno;
+              DebugCheckErr("fclose", TRUE, err, stateptr->last_errno);
+          }
+      }
+      return msgsend(CI_CLIB,"%w%w%w%w%w",  CL_Close|HtoT, DebugID,
+                     OSInfo1, OSInfo2, err);
+    }
+
+  case CL_Write:
+    {
+        /* Write(word handle, word nbtotal, word nbytes, bytes data)
+         * return(word nbytes)
+         * WriteX(word nbytes, bytes data)
+         * return(word nbytes)
+         */
+      unsigned char *rwdata = NULL, *rwhead = NULL;
+      unsigned char *write_source = NULL;
+      char flags;
+      FILE *fhreal;
+      unsigned int ack_reason = CL_Write; /* first ack is for CL_Write */
+
+      err = -1;                 /* err == 0 is fwrite() error indication */
+      unpack_message(buffp, "%w%w%w", &fh, &nbtotal, &nbytes); 
+      DebugPrintF(("CL_Write: fh %d nbtotal %u nbytes %u\n",
+                   fh, nbtotal, nbytes));
+
+      fhreal = hsysGetRealFileHandle(stateptr, fh, &flags);
+      nbtogo = nbtotal;
+
+      /* deal with the file handle */
+      if (fhreal == NULL)
+         err = 0;
+      else {
+        if (flags & READOP)
+           fseek(fhreal,0,SEEK_CUR);
+        stateptr->OSptr->FileFlags[fh] = (flags & BINARY) | WRITEOP;
+
+        nbtogo -= nbytes;
+
+        if (nbtogo > 0) {
+          write_source = rwdata = rwhead = (unsigned char *)malloc(nbtotal);
+          if (rwhead == NULL) {
+            fprintf(stderr, "OUT OF MEMORY at line %d in %s\n",
+                    __LINE__, __FILE__);
+            return -1;
+          }
+          memcpy(rwdata, buffp+12, nbytes);
+          rwdata += nbytes;
+        }
+        else
+           write_source = buffp+12;
+      }
+
+      do {
+        /* at least once!! */
+
+        if (nbtogo == 0 && err != 0) {
+          /* Do the actual write! */
+          if (fhreal == stdout || fhreal == stderr) {
+            stateptr->hostif->write(stateptr->hostif->hostosarg,
+                                    (char *)write_source, nbtotal);
+          }
+          else 
+             err = fwrite(write_source, 1, nbtotal, fhreal);
+          stateptr->last_errno = errno;
+          DebugCheckErr("fwrite", TRUE, (err == 0), stateptr->last_errno);
+        }
+
+        DevSW_FreePacket(packet);
+        if (msgsend(CI_CLIB,"%w%w%w%w%w%w", ack_reason|HtoT,
+                    DebugID, OSInfo1, OSInfo2, (err == 0), nbtogo))
+        {
+            fprintf(stderr, "COULD NOT REPLY at line %d in %s\n",
+                    __LINE__, __FILE__);
+            if (rwhead != NULL)
+               free(rwhead);
+            return -1;
+        }
+
+        if (nbtogo == 0 || err == 0) {
+          DebugPrintF(("\twrite complete - returning\n"));
+          if (rwhead != NULL)
+             free(rwhead);
+          return 0;
+        }
+        else {
+          /* await extension */
+          ack_reason = CL_WriteX;
+
+          packet = DevSW_AllocatePacket(Armsd_BufferSize);
+          if (packet == NULL)
+          {
+            fprintf(stderr, "COULD NOT ALLOC PACKET at line %d in %s\n",
+                    __LINE__, __FILE__);
+            if (rwhead != NULL)
+               free(rwhead);
+            return -1;
+          }
+          Adp_ChannelRegisterRead(CI_CLIB, NULL, NULL);
+          Adp_ChannelRead(CI_CLIB, &packet);
+          Adp_ChannelRegisterRead(CI_CLIB,
+                                  (ChannelCallback)HandleSysMessage,
+                                  stateptr);
+
+          buffhead = packet->pk_buffer;
+          unpack_message(BUFFERDATA(buffhead), "%w%w%w%w%w", &reason_code,
+                         &DebugID, &OSInfo1, &OSInfo2, &nbytes); 
+          if (reason_code != (CL_WriteX|TtoH)) {
+            DevSW_FreePacket(packet);
+            free(rwhead);
+            fprintf(stderr, "EXPECTING CL_WriteX GOT %u at line %d in %s\n",
+                    reason_code, __LINE__, __FILE__);
+            return -1;
+          }
+
+          DebugPrintF(("CL_WriteX: nbytes %u\n", nbytes));
+          memcpy(rwdata, BUFFERDATA(buffhead)+20, nbytes);
+          rwdata += nbytes;
+          nbtogo -= nbytes;
+        }
+
+      } while (TRUE);           /* will return when done */
+    }
+
+  case CL_WriteX:     /*
+                       * NOTE: if we've got here something has gone wrong
+                       * CL_WriteX's should all be picked up within the
+                       * CL_Write loop, probably best to return an error here
+                       * do this for the moment just so we do actually return
+                       */
+    fprintf(stderr, "ERROR: unexpected CL_WriteX message received\n");
+    return -1; 
+
+  case CL_Read:
+    {
+                   /* Read(word handle, word nbtotal)
+                    * return(word nbytes, word nbmore, bytes data)
+                    */
+                   /* ReadX()
+                    * return(word nbytes, word nbmore, bytes data) */
+      unsigned char *rwdata, *rwhead;
+      int gotlen;
+      unsigned int max_data_in_buffer=Armsd_BufferSize-28;
+      char flags;
+      FILE *fhreal;
+      unsigned int nbleft = 0, reason = CL_Read;
+
+      err = NoError;
+
+      unpack_message(buffp, "%w%w", &fh, &nbtotal);
+      DebugPrintF(("CL_Read: fh %d, nbtotal %d: ", fh, nbtotal));
+
+      rwdata = rwhead = (unsigned char *)malloc(nbtotal);
+      if (rwdata == NULL) {
+        fprintf(stderr, "OUT OF MEMORY at line %d in %s\n",
+                __LINE__, __FILE__);
+        DevSW_FreePacket(packet);
+        return -1;
+      }
+
+      /* perform the actual read */
+      fhreal = hsysGetRealFileHandle(stateptr, fh, &flags);
+      if (fhreal == NULL)
+      {
+        /* bad file handle */
+        err = -1;
+        nbytes = 0;
+        gotlen = 0;
+      }
+      else
+      {
+        if (flags & WRITEOP)
+          fseek(fhreal,0,SEEK_CUR);
+        stateptr->OSptr->FileFlags[fh] = (flags & BINARY) | WRITEOP;
+        if (isatty_(fhreal)) {
+          /* reading from a tty, so do some nasty stuff, reading into rwdata */
+          if (angel_hostif->gets(stateptr->hostif->hostosarg, (char *)rwdata,
+                                 nbtotal) != 0)
+             gotlen = strlen((char *)rwdata);
+          else
+             gotlen = 0;
+          stateptr->last_errno = errno;
+          DebugPrintF(("ttyread %d\n", gotlen));
+        }
+        else {
+          /* not a tty, reading from a real file */
+          gotlen = fread(rwdata, 1, nbtotal, fhreal);
+          stateptr->last_errno = errno;
+          DebugCheckErr("fread", FALSE, (gotlen == 0), stateptr->last_errno);
+          DebugPrintF(("(%d)\n", gotlen));
+        }
+      }
+
+      nbtogo = gotlen;
+
+      do {
+        /* at least once */
+
+        if ((unsigned int) nbtogo <= max_data_in_buffer)
+           nbytes = nbtogo;
+        else
+           nbytes = max_data_in_buffer;
+        nbtogo -= nbytes;
+
+        /* last ReadX needs subtle adjustment to returned nbtogo */
+        if (nbtogo == 0 && err == NoError && reason == CL_ReadX)
+           nbleft = nbtotal - gotlen;
+        else
+           nbleft = nbtogo;
+
+        count = msgbuild(BUFFERDATA(buffhead), "%w%w%w%w%w%w%w",
+                         reason|HtoT, 0, ADP_HandleUnknown,
+                         ADP_HandleUnknown, err, nbytes, nbleft);
+
+        if (err == NoError) {
+          /* copy data into buffptr */   
+          memcpy(BUFFERDATA(buffhead)+28, rwdata, nbytes);
+          rwdata += nbytes;
+          count += nbytes;
+        }
+
+        DebugPrintF(("\treplying err %d, nbytes %d, nbtogo %d\n",
+                     err, nbytes, nbtogo));
+
+        packet->pk_length = count;
+        Adp_ChannelWrite(CI_CLIB, packet);
+
+        if (nbtogo == 0 || err != NoError) {
+          /* done */
+          free(rwhead);
+          return 0;
+        }
+        else {
+          /* await extension */
+          reason = CL_ReadX;
+
+          packet = DevSW_AllocatePacket(Armsd_BufferSize);
+          if (packet == NULL) {
+            fprintf(stderr, "COULD NOT ALLOC PACKET at line %d in %s\n",
+                    __LINE__, __FILE__);
+            free(rwhead);
+            return -1;
+          }
+          Adp_ChannelRegisterRead(CI_CLIB, NULL, NULL);
+          Adp_ChannelRead(CI_CLIB, &packet);
+          Adp_ChannelRegisterRead(CI_CLIB,
+                                  (ChannelCallback)HandleSysMessage,
+                                  stateptr);
+          buffhead = packet->pk_buffer;
+          unpack_message(BUFFERDATA(buffhead),"%w", &reason_code);
+          if (reason_code != (CL_ReadX|TtoH)) {
+            fprintf(stderr, "EXPECTING CL_ReadX GOT %u at line %d in %s\n",
+                    reason_code, __LINE__, __FILE__);
+            DevSW_FreePacket(packet);
+            free(rwdata);
+            return -1;
+          }
+        }
+
+      } while (TRUE);           /* will return above on error or when done */
+    }
+
+  case CL_ReadX:      /* If we're here something has probably gone wrong */
+    fprintf(stderr, "ERROR: Got unexpected CL_ReadX message\n");
+    return -1;
+
+  case CL_Seek:
+    {
+      unpack_message(buffp, "%w%w", &fh, &posn);
+      DebugPrintF(("CL_Seek: fh %d, posn %ld\n", fh, posn));
+      DevSW_FreePacket(packet);
+
+      fhreal = hsysGetRealFileHandle(stateptr, fh, NULL);
+      if (fhreal == NULL)
+         err = -1;
+      else {
+        err = fseek(fhreal, posn, SEEK_SET); 
+        stateptr->last_errno = errno;
+        DebugCheckErr("fseek", TRUE, err, stateptr->last_errno);
+      }
+
+      return msgsend(CI_CLIB, "%w%w%w%w%w", CL_Seek|HtoT, 
+                         DebugID, OSInfo1, OSInfo2, err);
+    }
+
+  case CL_Flen:
+    {
+      unpack_message(buffp, "%w", &fh);
+      DebugPrintF(("CL_Flen: fh %d ", fh));
+      DevSW_FreePacket(packet);
+
+      fhreal = hsysGetRealFileHandle(stateptr, fh, NULL);
+      if (fhreal == NULL)
+        fl = -1;
+      else {
+        posn = ftell(fhreal);
+        if (fseek(fhreal, 0L, SEEK_END) < 0) {
+          fl=-1;
+        }
+        else {
+          fl = ftell(fhreal);
+          fseek(fhreal, posn, SEEK_SET);
+        }
+        stateptr->last_errno = errno;
+      }
+      DebugPrintF(("returning len %ld\n", fl));
+      return msgsend(CI_CLIB, "%w%w%w%w%w", CL_Flen|HtoT, DebugID, OSInfo1,
+                     OSInfo2, fl);
+    } 
+
+  case CL_IsTTY:
+    {
+      int  ttyOrNot;
+      unpack_message(buffp, "%w", &fh);
+      DebugPrintF(("CL_IsTTY: fh %d ", fh));
+      DevSW_FreePacket(packet);
+
+      fhreal = hsysGetRealFileHandle(stateptr, fh, NULL);
+      if (fhreal == NULL)
+         ttyOrNot = FALSE;
+      else {
+        ttyOrNot = isatty_(fhreal);
+        stateptr->last_errno = errno;
+      }
+      DebugPrintF(("returning %s\n", ttyOrNot ? "tty (1)" : "not (0)"));
+
+      return msgsend(CI_CLIB, "%w%w%w%w%w",CL_IsTTY|HtoT, 
+                         DebugID, OSInfo1, OSInfo2, ttyOrNot);
+    }
+
+  case CL_TmpNam:
+    {
+      char *name;
+      unsigned int tnamelen, TargetID;
+      unpack_message(buffp, "%w%w", &tnamelen, &TargetID); 
+      DebugPrintF(("CL_TmpNam: tnamelen %d TargetID %d: ",
+                   tnamelen, TargetID));
+      DevSW_FreePacket(packet);
+
+      TargetID = TargetID & 0xFF;
+      if (stateptr->OSptr->TempNames[TargetID] == NULL) {
+        if ((stateptr->OSptr->TempNames[TargetID] =
+             (char *)malloc(L_tmpnam)) == NULL)
+        {
+          fprintf(stderr, "OUT OF MEMORY at line %d in %s\n",
+                  __LINE__, __FILE__);
+          return -1;
+        }
+        tmpnam(stateptr->OSptr->TempNames[TargetID]);
+      }
+      name = stateptr->OSptr->TempNames[TargetID];
+      len = strlen(name) + 1;
+      packet = DevSW_AllocatePacket(Armsd_BufferSize);
+      if (packet == NULL)
+      {
+          fprintf(stderr, "COULD NOT ALLOC PACKET at line %d in %s\n",
+                  __LINE__, __FILE__);
+          return -1;
+      }
+      buffhead = packet->pk_buffer;
+      if (len > tnamelen) {
+        DebugPrintF(("TMPNAME TOO LONG!\n"));
+        count = msgbuild(BUFFERDATA(buffhead), "%w%w%w%w%w",
+                           CL_TmpNam|HtoT, DebugID, OSInfo1, OSInfo2, -1);
+      }
+      else {
+        DebugPrintF(("returning \"%s\"\n", name));
+        count = msgbuild(BUFFERDATA(buffhead), "%w%w%w%w%w%w", CL_TmpNam|HtoT,
+                         DebugID, OSInfo1, OSInfo2, 0, len);
+        strcpy((char *)BUFFERDATA(buffhead)+count, name);
+        count +=len+1;
+      }
+      packet->pk_length = count;
+      Adp_ChannelWrite(CI_CLIB, packet);/* Send message. */
+      return 0;
+    }
+
+  case CL_Unrecognised:
+    DebugPrintF(("CL_Unrecognised!!\n"));
+    return 0;
+
+  default:
+    fprintf(stderr, "UNRECOGNISED CL code %08x\n", reason_code);
+    break;
+/* Need some sort of error handling here. */
+/* A call to CL_Unrecognised should suffice */
+  }
+  return -1;  /* Stop a potential compiler warning */
+}
+
+#ifdef COMPILING_ON_WINDOWS
+
+#include <windows.h>
+
+extern HWND hwndParent;
+
+void panic(const char *format, ...)
+{
+    char buf[2048];
+    va_list args;
+
+    Adp_CloseDevice();
+
+    va_start(args, format);
+    vsprintf(buf, format, args);
+
+    MessageBox(hwndParent, (LPCTSTR)buf, (LPCTSTR)"Fatal Error:", MB_OK);
+
+    /* SJ - Not the proper way to shutdown the app */
+    exit(EXIT_FAILURE);
+
+/*
+    if (hwndParent != NULL)
+        SendMessage(hwndParent, WM_QUIT, 0, 0);
+*/
+
+    va_end(args);
+}
+
+#else
+
+void panic(const char *format, ...)
+{
+    va_list args;
+
+    va_start(args, format);
+    fprintf(stderr, "Fatal error: ");
+    vfprintf(stderr, format, args);
+    fprintf(stderr,"\n");
+
+    exit(EXIT_FAILURE);
+}
+
+#endif
+
+/* EOF hsys.c */
diff --git a/gdb/rdi-share/hsys.h b/gdb/rdi-share/hsys.h
new file mode 100644
index 0000000..7f63d01
--- /dev/null
+++ b/gdb/rdi-share/hsys.h
@@ -0,0 +1,101 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*
+ * Host C library support header file.
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+
+#ifndef angsd_hsys_h
+#define angsd_hsys_h
+
+#define HSYS_FOPEN_MAX 256
+#define NONHANDLE -1
+#define UNIQUETEMPS 256
+
+#include "dbg_hif.h"
+#include "hostchan.h"
+
+typedef struct {
+  FILE *FileTable[HSYS_FOPEN_MAX] ;
+  char FileFlags[HSYS_FOPEN_MAX] ;
+  char *TempNames[UNIQUETEMPS];
+} OSblock;
+
+#define NOOP 0
+#define BINARY 1
+#define READOP 2
+#define WRITEOP 4
+
+typedef struct {
+  const struct Dbg_HostosInterface *hostif;  /* Interface to debug toolkit. */
+  int last_errno;                              /* Number of the last error. */
+  OSblock *OSptr;
+  char **CommandLine ;           /* Ptr to cmd line d`string held by ardi.c */
+} hsys_state;
+
+/*
+ *  Function: HostSysInit
+ *   Purpose: Set up the state block, filetable and register the and C lib
+ *            callback fn 
+ *
+ *    Params:
+ *       Input: hostif, the host interface from the debug toolbox
+ *              cmdline, the command line used to call the image
+ *              state, the status block for the C lib 
+ *
+ *   Returns:
+ *          OK: an RDIError_* valuee
+ */
+extern int HostSysInit(
+  const struct Dbg_HostosInterface *hostif, char **cmdline, hsys_state **state
+);
+
+/*
+ *  Function: HostSysExit
+ *   Purpose: Close down the host side C library support
+ *
+ *    Params:
+ *       Input: hstate, the status block for the C lib 
+ *
+ *    Returns:  an RDIError_* valuee
+ */
+extern int HostSysExit(hsys_state *hstate);
+
+/*
+ *  Function: HandleSysMessage
+ *   Purpose: Handle an incoming C library message as a callback
+ *
+ *    Params:
+ *       Input: packet is the incoming data packet as described in devsw.h
+ *       hstate, the status block for the C lib
+ *
+ *    Returns:  an RDIError_* valuee
+ */
+extern int HandleSysMessage(Packet *packet, hsys_state* stateptr);
+
+/*
+ *  Function: panic
+ *   Purpose: Print a fatal error message
+ *
+ *    Params:
+ *       Input: format  printf() style message describing the problem
+ *              ...     extra arguments for printf().
+ *
+ *   Returns: This routine does not return
+ *
+ * Post-conditions: Will have called exit(1);
+ */
+extern void panic(const char *format, ...);
+
+#endif /* ndef angsd_hsys_h */
+
+/* EOF hsys.h */
diff --git a/gdb/rdi-share/logging.c b/gdb/rdi-share/logging.c
new file mode 100644
index 0000000..79b70ef
--- /dev/null
+++ b/gdb/rdi-share/logging.c
@@ -0,0 +1,369 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * logging.c - methods for logging warnings, errors and trace info
+ *
+ */
+
+#include <stdarg.h>     /* ANSI varargs support */
+
+#ifdef TARGET
+# include "angel.h"
+# include "devconf.h"
+#else
+# include "host.h"
+#endif
+
+#include "logging.h"    /* Header file for this source code */
+
+#ifndef UNUSED
+# define UNUSED(x) ((x)=(x))
+#endif
+
+/*
+ * __rt_warning
+ * ------------
+ * This routine is provided as a standard method of generating
+ * run-time system warnings. The actual action taken by this code can
+ * be board or target application specific, e.g. internal logging,
+ * debug message, etc.
+ */
+
+#ifdef DEBUG
+
+# ifdef DEBUG_METHOD
+
+#  define  STRINGIFY2(x) #x
+#  define  STRINGIFY(x)  STRINGIFY2(x)
+#  define  DEBUG_METHOD_HEADER        STRINGIFY(DEBUG_METHOD##.h)
+
+#  include DEBUG_METHOD_HEADER
+
+#  define  METHOD_EXPAND_2(m, p, c) m##p(c)
+#  define  METHOD_EXPAND(m, p, c)   METHOD_EXPAND_2(m, p, c)
+
+#  define  CHAROUT(c)    METHOD_EXPAND(DEBUG_METHOD, _PutChar,  (c))
+#  define  PRE_DEBUG(l)  METHOD_EXPAND(DEBUG_METHOD, _PreWarn,  (l))
+#  define  POST_DEBUG(n) METHOD_EXPAND(DEBUG_METHOD, _PostWarn, (n))
+
+# else
+#  error Must define DEBUG_METHOD
+# endif
+
+#endif /* def DEBUG */
+
+/*
+ * the guts of __rt_warning
+ */
+
+#pragma no_check_stack
+#ifdef DEBUG
+
+static const char hextab[] = "0123456789ABCDEF";
+
+/*
+ * If debugging, then we break va_warn into sub-functions which
+ * allow us to get an easy breakpoint on the formatted string
+ */
+static int va_warn0(char *format, va_list args)
+{
+    int len = 0;
+
+    while ((format != NULL) && (*format != '\0'))
+    {
+        if (*format == '%')
+        {
+            char fch = *(++format); /* get format character (skipping '%') */
+            int ival; /* holder for integer arguments */
+            char *string; /* holder for string arguments */
+            int width = 0; /* No field width by default */
+            int padzero = FALSE; /* By default we pad with spaces */
+
+            /*
+             * Check if the format has a width specified. NOTE: We do
+             * not use the "isdigit" function here, since it will
+             * require run-time support. The current ARM Ltd header
+             * defines "isdigit" as a macro, that uses a fixed
+             * character description table.
+             */
+            if ((fch >= '0') && (fch <= '9'))
+            {
+                if (fch == '0')
+                {
+                    /* Leading zeroes padding */
+                    padzero = TRUE;
+                    fch = *(++format);
+                }
+
+                while ((fch >= '0') && (fch <= '9'))
+                {
+                    width = ((width * 10) + (fch - '0'));
+                    fch = *(++format);
+                }
+            }
+
+            if (fch == 'l')
+                /* skip 'l' in "%lx", etc. */
+                fch = *(++format);
+
+            switch (fch)
+            {
+              case 'c':
+                  /* char */
+                  ival = va_arg(args, int);
+                  CHAROUT((char)ival);
+                  len++;
+                  break;
+
+              case 'x':
+              case 'X':
+              {
+                  /* hexadecimal */
+                  unsigned int uval = va_arg(args, unsigned int);
+                  int loop;
+
+                  UNUSED(uval);
+
+                  if ((width == 0) || (width > 8))
+                      width = 8;
+
+                  for(loop = (width * 4); (loop != 0); loop -= 4)
+                  {
+                      CHAROUT(hextab[(uval >> (loop - 4)) & 0xF]);
+                      len++;
+                  }
+              }
+
+              break;
+
+              case 'd':
+                  /* decimal */
+                  ival = va_arg(args, int);
+
+                  if (ival < 0)
+                  {
+                      ival = -ival;
+                      CHAROUT('-');
+                      len++;
+                  }
+
+                  if (ival == 0)
+                  {
+                      CHAROUT('0');
+                      len++;
+                  }
+                  else
+                  {
+                      /*
+                       * The simplest method of displaying numbers is
+                       * to provide a small recursive routine, that
+                       * nests until the most-significant digit is
+                       * reached, and then falls back out displaying
+                       * individual digits. However, we want to avoid
+                       * using recursive code within the lo-level
+                       * parts of Angel (to minimise the stack
+                       * usage). The following number conversion is a
+                       * non-recursive solution.
+                       */
+                      char buffer[16]; /* stack space used to hold number */
+                      int count = 0; /* pointer into buffer */
+
+                      /*
+                       * Place the conversion into the buffer in
+                       * reverse order:
+                       */
+                      while (ival != 0)
+                      {
+                          buffer[count++] = ('0' + ((unsigned int)ival % 10));
+                          ival = ((unsigned int)ival / 10);
+                      }
+
+                      /*
+                       * Check if we are placing the data in a
+                       * fixed width field:
+                       */
+                      if (width != 0)
+                      {
+                          width -= count;
+
+                          for (; (width != 0); width--)
+                          {
+                              CHAROUT(padzero ? '0': ' ');
+                              len++;
+                          }
+                      }
+
+                      /* then display the buffer in reverse order */
+                      for (; (count != 0); count--)
+                      {
+                          CHAROUT(buffer[count - 1]);
+                          len++;
+                      }
+                  }
+
+                  break;
+
+              case 's':
+                  /* string */
+                  string = va_arg(args, char *);
+
+                  /* we only need this test once */
+                  if (string != NULL)
+                      /* whilst we check this for every character */
+                      while (*string)
+                      {
+                          CHAROUT(*string);
+                          len++;
+                          string++;
+
+                          /*
+                           * NOTE: We do not use "*string++" as the macro
+                           * parameter, since we do not know how many times
+                           *the parameter may be expanded within the macro.
+                           */
+                      }
+
+                  break;
+
+              case '\0':
+                  /*
+                   * string terminated by '%' character, bodge things
+                   * to prepare for default "format++" below
+                   */
+                  format--;
+
+                  break;
+
+              default:
+                  /* just display the character */
+                  CHAROUT(*format);
+                  len++;
+
+                  break;
+            }
+
+            format++; /* step over format character */
+        }
+        else
+        {
+            CHAROUT(*format);
+            len++;
+            format++;
+        }
+    }
+    return len;
+}
+
+/*
+ * this routine is simply here as a good breakpoint for dumping msg -
+ * can be used by DEBUG_METHOD macros or functions, if required.
+ */
+# ifdef DEBUG_NEED_VA_WARN1
+static void va_warn1(int len, char *msg)
+{
+    UNUSED(len); UNUSED(msg);
+}
+# endif
+
+void va_warn(WarnLevel level, char *format, va_list args)
+{
+    int len;
+
+    if ( PRE_DEBUG( level ) )
+    {
+        len = va_warn0(format, args);
+        POST_DEBUG( len );
+    }
+}
+
+#else /* ndef DEBUG */
+
+void va_warn(WarnLevel level, char *format, va_list args)
+{
+    UNUSED(level); UNUSED(format); UNUSED(args);
+}
+
+#endif /* ... else ndef(DEBUG) ... */
+#pragma check_stack
+
+#pragma no_check_stack
+void __rt_warning(char *format, ...)
+{
+    va_list args;
+
+    /*
+     * For a multi-threaded system we should provide a lock at this point
+     * to ensure that the warning messages are sequenced properly.
+     */
+
+    va_start(args, format);
+    va_warn(WL_WARN, format, args);
+    va_end(args);
+
+    return;
+}
+#pragma check_stack
+
+#ifdef TARGET
+
+#pragma no_check_stack
+void __rt_uninterruptable_loop( void ); /* in suppasm.s */
+
+void __rt_error(char *format, ...)
+{
+    va_list args;
+
+    va_start(args, format);
+
+    /* Display warning message */
+    va_warn(WL_ERROR, format, args);
+
+    __rt_uninterruptable_loop();
+
+    va_end(args);
+    return;
+}
+#pragma check_stack
+
+#endif /* def TARGET */
+
+#ifdef DO_TRACE
+
+static bool trace_on = FALSE; /* must be set true in debugger if req'd */
+
+#pragma no_check_stack
+void __rt_trace(char *format, ...)
+{
+    va_list args;
+
+    /*
+     * For a multi-threaded system we should provide a lock at this point
+     * to ensure that the warning messages are sequenced properly.
+     */
+
+    if (trace_on)
+    {
+        va_start(args, format);
+        va_warn(WL_TRACE, format, args);
+        va_end(args);
+    }
+
+    return;
+}
+#pragma check_stack
+
+#endif /* def DO_TRACE */
+
+
+/* EOF logging.c */
diff --git a/gdb/rdi-share/logging.h b/gdb/rdi-share/logging.h
new file mode 100644
index 0000000..97bf902
--- /dev/null
+++ b/gdb/rdi-share/logging.h
@@ -0,0 +1,121 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * logging.h - methods for logging warnings, errors and trace info
+ */
+
+#ifndef angel_logging_h
+#define angel_logging_h
+
+#include <stdarg.h>
+
+/*
+ * __rt_warning
+ * ------------
+ * Provides a standard method of generating run-time system
+ * warnings. The actual action taken by this code can be board or
+ * target application specific, e.g. internal logging, debug message,
+ * etc.
+ */
+extern void __rt_warning(char *format, ...);
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * __rt_error
+ * ----------
+ * Raise an internal Angel error. The parameters are passed directly
+ * to "__rt_warning" for display, and the code then raises a debugger
+ * event and stops the target processing.
+ */
+extern void __rt_error(char *format, ...);
+
+/*
+ * Some macros for debugging and warning messages
+ */
+
+typedef enum WarnLevel {
+    WL_TRACE,
+    WL_WARN,
+    WL_ERROR
+} WarnLevel;
+
+void va_warn(WarnLevel level, char *format, va_list args);
+
+#ifdef _WINGDI_
+/* stupidity in MSVC <wingdi.h> (in <windows.h> in <winsock.h>) */
+# undef ERROR
+#endif
+
+#ifndef ERROR
+# define ERROR_FORMAT "Error \"%s\" in %s at line %d\n"
+# define ERROR(e) __rt_error(ERROR_FORMAT, (e), __FILE__, __LINE__)
+#endif
+
+#ifndef ASSERT
+# ifdef ASSERTIONS_ENABLED
+#   define ASSERT(x, y) ((x) ? (void)(0) : ERROR((y)))
+# else
+#   define ASSERT(x, y) ((void)(0))
+# endif
+#endif
+
+#ifndef WARN
+# ifdef ASSERTIONS_ENABLED
+#   define WARN_FORMAT "Warning \"%s\" in %s at line %d\n"
+#   define WARN(w) __rt_warning(WARN_FORMAT, (w), __FILE__, __LINE__)
+# else
+#   define WARN(w) ((void)(0))
+# endif
+#endif
+
+
+#ifdef NO_INFO_MESSAGES
+# define __rt_info (void)
+# ifndef INFO
+#   define INFO(w)
+# endif
+#else
+# define __rt_info __rt_warning
+# ifndef INFO
+#  ifdef DEBUG
+#   define INFO(w) __rt_warning("%s\n", (w))
+#  else
+#   define INFO(w) ((void)(0))
+#  endif
+# endif
+#endif
+
+
+#if defined(DEBUG) && !defined(NO_IDLE_CHITCHAT)
+# ifndef DO_TRACE
+#   define DO_TRACE (1)
+# endif
+#endif
+
+#ifdef DO_TRACE
+extern void __rt_trace(char *format, ...);
+#endif
+
+#ifndef TRACE
+# ifdef DO_TRACE
+#   define TRACE(w) __rt_trace("%s ", (w))
+# else
+#   define TRACE(w) ((void)(0))
+# endif
+#endif
+
+#endif /* ndef angel_logging_h */
+
+/* EOF logging.h */
diff --git a/gdb/rdi-share/msgbuild.c b/gdb/rdi-share/msgbuild.c
new file mode 100644
index 0000000..e2db2cc
--- /dev/null
+++ b/gdb/rdi-share/msgbuild.c
@@ -0,0 +1,282 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * msgbuild.c - utilities for assembling and interpreting ADP messages
+ *
+ */
+
+#include <stdarg.h>     /* ANSI varargs support */
+
+#ifdef TARGET
+# include "angel.h"
+# include "devconf.h"
+#else
+# include "host.h"
+# include "hostchan.h"
+#endif
+
+#include "channels.h"
+#include "buffers.h"
+#include "endian.h"     /* Endianness support macros */
+#include "msgbuild.h"   /* Header file for this source code */
+
+#ifndef UNUSED
+# define UNUSED(x) ((x)=(x))
+#endif
+
+#ifndef TARGET
+
+extern unsigned int Armsd_BufferSize;
+
+#endif /* ndef TARGET */
+
+
+unsigned int vmsgbuild(unsigned char *buffer, const char *format, va_list args)
+{
+    unsigned int blen = 0;
+    int ch;
+
+    /* Step through the format string */
+    while ((ch = *format++) != '\0')
+    {
+        if (ch != '%')
+        {
+            if (buffer != NULL)
+                *buffer++ = (unsigned char)ch;
+
+            blen++;
+        }
+        else
+        {
+            switch (ch = *format++)
+            {
+              case 'w':
+              case 'W':
+              /* 32bit pointer */
+              case 'p':
+              case 'P':
+              {
+                  /* 32bit word / 32bit pointer */
+                  unsigned int na = va_arg(args, unsigned int);
+
+                  if (buffer != NULL)
+                  {
+                      PUT32LE(buffer, na);
+                      buffer += sizeof(unsigned int);
+                  }
+
+                  blen += sizeof(unsigned int);
+
+                  break;
+              }
+
+              case 'h':
+              case 'H':
+              {
+                  /* 16bit value */
+                  unsigned int na = va_arg(args, unsigned int);
+
+                  if (buffer != NULL)
+                  {
+                      PUT16LE(buffer, na);
+                      buffer += sizeof(unsigned short);
+                  }
+
+                  blen += sizeof(unsigned short);
+
+                  break;
+              }
+
+              case 'c':
+              case 'C':
+              case 'b':
+              case 'B':
+                  /* 8bit character / 8bit byte */
+                  ch = va_arg(args, int);
+
+                  /*
+                   * XXX
+                   *
+                   * fall through to the normal character processing
+                   */
+
+              case '%':
+              default:
+                  /* normal '%' character, or a different normal character */
+                  if (buffer != NULL)
+                      *buffer++ = (unsigned char)ch;
+
+                  blen++;
+                  break;
+            }
+        }
+    }
+
+    return blen;
+}
+
+/*
+ * msgbuild
+ * --------
+ * Simple routine to aid in construction of Angel messages. See the
+ * "msgbuild.h" header file for a detailed description of the operation
+ * of this routine.
+ */
+unsigned int msgbuild(unsigned char *buffer, const char *format, ...)
+{
+    va_list args;
+    unsigned int blen;
+
+    va_start(args, format);
+    blen = vmsgbuild(buffer, format, args);
+    va_end(args);
+
+    return blen;
+}
+
+#if !defined(JTAG_ADP_SUPPORTED) && !defined(MSG_UTILS_ONLY)
+/*
+ * This routine allocates a buffer, puts the data supplied as
+ * parameters into the buffer and sends the message. It does *NOT*
+ * wait for a reply.
+ */
+extern int msgsend(ChannelID chan, const char *format,...)
+{
+    unsigned int length;
+    p_Buffer buffer;
+    va_list args;
+# ifndef TARGET
+    Packet *packet;
+
+    packet = DevSW_AllocatePacket(Armsd_BufferSize);
+    buffer = packet->pk_buffer;
+# else
+    buffer = angel_ChannelAllocBuffer(Angel_ChanBuffSize);
+# endif
+
+    if (buffer != NULL)
+    {
+        va_start(args, format);
+
+        length = vmsgbuild(BUFFERDATA(buffer), format, args);
+
+# ifdef TARGET
+        angel_ChannelSend(CH_DEFAULT_DEV, chan, buffer, length);
+# else
+        packet->pk_length = length;
+        Adp_ChannelWrite(chan, packet);
+# endif
+
+        va_end(args);
+        return 0;
+    }
+    else
+        return -1;
+}
+
+#endif /* ndef JTAG_ADP_SUPPORTED && ndef MSG_UTILS_ONLY */
+
+/*
+ * unpack_message
+ * --------------
+ */
+extern unsigned int unpack_message(unsigned char *buffer, const char *format, ...)
+{
+    va_list args;
+    unsigned int blen = 0;
+    int ch;
+    char *chp = NULL;
+
+    va_start(args, format);
+
+    /* Step through the format string. */
+    while ((ch = *format++) != '\0')
+    {
+        if (ch != '%')
+        {
+            if (buffer != NULL)
+                ch = (unsigned char)*buffer++;
+
+            blen++;
+        }
+        else
+        {
+            switch (ch = *format++)
+            {
+              case 'w':
+              case 'W':
+              {
+                  /* 32bit word. */
+                  unsigned int *nap = va_arg(args, unsigned int*);
+
+                  if (buffer != NULL)
+                  {
+                      *nap = PREAD32(LE, buffer);
+                      buffer += sizeof(unsigned int);
+                  }
+
+                  blen += sizeof(unsigned int);
+
+                  break;
+              }
+
+              case 'h':
+              case 'H':
+              {
+                  /* 16bit value. */
+                  unsigned int *nap = va_arg(args, unsigned int*);
+
+                  if (buffer != NULL)
+                  {
+                      *nap = PREAD16(LE,buffer);
+                      buffer += sizeof(unsigned short);
+                  }
+
+                  blen += sizeof(unsigned short);
+
+                  break;
+              }
+
+              case 'c':
+              case 'C':
+              case 'b':
+              case 'B':
+                  /* 8-bit character, or 8-bit byte */
+                  chp = va_arg(args, char*);
+
+                  /*
+                   * XXX
+                   *
+                   * fall through to the normal character processing.
+                   */
+
+              case '%':
+              default:
+                  /* normal '%' character, or a different normal character */
+                  if (buffer != NULL)
+                      *chp = (unsigned char)*buffer++;
+
+                  blen++;
+
+                  break;
+            }
+        }
+    }
+
+    va_end(args);
+    return(blen);
+}
+
+
+/* EOF msgbuild.c */
diff --git a/gdb/rdi-share/msgbuild.h b/gdb/rdi-share/msgbuild.h
new file mode 100644
index 0000000..ac2436c
--- /dev/null
+++ b/gdb/rdi-share/msgbuild.h
@@ -0,0 +1,75 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * msgbuild.h - utilities for assembling and interpreting ADP messages
+ */
+
+#ifndef angel_msgbuild_h
+#define angel_msgbuild_h
+#include <stdarg.h>
+#include "channels.h"
+
+/*
+ * msgbuild
+ * --------
+ * We use a "varargs" function to enable a description of how the
+ * final message should look to be provided. We use a function rather
+ * than in-line macros to keep the size of Angel small.
+ *
+ * The "buffer" pointer is the starting point from where the data will
+ * be written. Note: If a NULL pointer is passed then no data will be
+ * written, but the size information will be returned. This allows
+ * code to call this routine with a NULL "buffer" pointer to ascertain
+ * whether the pointer they are passing contains enough space for the
+ * message being constructed.
+ *
+ * The "format" string should contain sequences of the following
+ * tokens:
+ *      %w - insert 32bit word value
+ *      %p - insert 32bit target pointer value
+ *      %h - insert 16bit value
+ *      %b - insert 8bit byte value
+ *
+ * The return parameter is the final byte length of the data written.
+ */
+unsigned int msgbuild(unsigned char *buffer, const char *format, ...);
+unsigned int vmsgbuild(unsigned char *buffer, const char *format,
+                       va_list args);
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * msgsend
+ * -------
+ * As for msgbuild except that it allocates a buffer, formats the data as
+ * for msgbuild and transmits the packet. Returns 0 if successful non 0 if ot
+ * fails.
+ * Not for use on cooked channels e.g. debug channels only.
+ */
+extern int msgsend(ChannelID chan, const char *format, ...);
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * Unpack_message
+ * --------------
+ *    This basically does the opposite of msg_build, it takes a message, and
+ * a scanf type format string (but much cut down functionality) and returns
+ * the arguments in the message.
+ */
+extern unsigned int unpack_message(unsigned char *buffer, const char *format, ...);
+
+#endif /* ndef angel_msgbuild_h */
+
+/* EOF msgbuild.h */
diff --git a/gdb/rdi-share/params.c b/gdb/rdi-share/params.c
new file mode 100644
index 0000000..2c78188
--- /dev/null
+++ b/gdb/rdi-share/params.c
@@ -0,0 +1,325 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Parameter negotiation utility functions
+ */
+
+#include "params.h"
+
+#include "endian.h"
+#include "logging.h"
+
+
+/*
+ * Function: Angel_FindParam
+ *  Purpose: find the value of a given parameter from a config.
+ *
+ * see params.h for details
+ */
+bool Angel_FindParam( ADP_Parameter          type,
+                      const ParameterConfig *config,
+                      unsigned int          *value )
+{
+    unsigned int i;
+
+    for ( i = 0; i < config->num_parameters; ++i )
+       if ( config->param[i].type == type )
+       {
+           *value = config->param[i].value;
+           return TRUE;
+       }
+
+    return FALSE;
+}
+
+
+#if !defined(TARGET) || !defined(MINIMAL_ANGEL) || MINIMAL_ANGEL == 0
+
+ParameterList *Angel_FindParamList( const ParameterOptions *options,
+                                    ADP_Parameter           type )
+{
+    unsigned int i;
+
+    for ( i = 0; i < options->num_param_lists; ++i )
+       if ( options->param_list[i].type == type )
+          return &options->param_list[i];
+
+    return NULL;
+}
+
+
+#if defined(TARGET) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_MatchParams
+ *  Purpose: find a configuration from the requested options which is
+ *           the best match from the supported options.
+ *
+ * see params.h for details
+ */
+const ParameterConfig *Angel_MatchParams( const ParameterOptions *requested,
+                                          const ParameterOptions *supported )
+{
+    static Parameter        chosen_params[AP_NUM_PARAMS];
+    static ParameterConfig  chosen_config = {
+        AP_NUM_PARAMS,
+        chosen_params
+    };
+    unsigned int i;
+
+    ASSERT( requested != NULL, "requested is NULL" );
+    ASSERT( requested != NULL, "requested is NULL" );
+    ASSERT( supported->num_param_lists <= AP_NUM_PARAMS, "supp_num too big" );
+
+    if ( requested->num_param_lists > supported->num_param_lists )
+    {
+        WARN( "req_num exceeds supp_num" );
+        return NULL;
+    }
+
+    for ( i = 0; i < requested->num_param_lists; ++i )
+    {
+        bool           match;
+        unsigned int   j;
+
+        const ParameterList *req_list = &requested->param_list[i];
+        ADP_Parameter        req_type = req_list->type;
+        const ParameterList *sup_list = Angel_FindParamList(
+                                            supported, req_type );
+
+        if ( sup_list == NULL )
+        {
+#ifdef ASSERTIONS_ENABLED
+            __rt_warning( "option %x not supported\n", req_type );
+#endif
+            return NULL;
+        }
+
+        for ( j = 0, match = FALSE;
+              (j < req_list->num_options) && !match;
+              ++j
+            )
+        {
+            unsigned int k;
+
+            for ( k = 0;
+                  (k < sup_list->num_options) && !match;
+                  ++k
+                )
+            {
+                if ( req_list->option[j] == sup_list->option[k] )
+                {
+#ifdef DEBUG
+                    __rt_info( "chose value %d for option %x\n",
+                               req_list->option[j], req_type );
+#endif
+                    match = TRUE;
+                    chosen_config.param[i].type = req_type;
+                    chosen_config.param[i].value = req_list->option[j];
+                }
+            }
+        }
+
+        if ( !match )
+        {
+#ifdef ASSERTIONS_ENABLED
+            __rt_warning( "no match found for option %x\n", req_type );
+#endif
+            return NULL;
+        }
+    }
+
+    chosen_config.num_parameters = i;
+    INFO( "match succeeded" );
+    return &chosen_config;
+}
+#endif /* defined(TARGET) || defined(TEST_PARAMS) */
+
+
+#if !defined(TARGET) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_StoreParam
+ *  Purpose: store the value of a given parameter to a config.
+ *
+ * see params.h for details
+ */
+bool Angel_StoreParam( ParameterConfig *config,
+                       ADP_Parameter    type,
+                       unsigned int     value )
+{
+    unsigned int i;
+
+    for ( i = 0; i < config->num_parameters; ++i )
+       if ( config->param[i].type == type )
+       {
+           config->param[i].value = value;
+           return TRUE;
+       }
+
+    return FALSE;
+}
+#endif /* !defined(TARGET) || defined(TEST_PARAMS) */
+
+
+#if defined(TARGET) || defined(LINK_RECOVERY) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_BuildParamConfigMessage
+ *  Purpose: write a parameter config to a buffer in ADP format.
+ *
+ * see params.h for details
+ */
+unsigned int Angel_BuildParamConfigMessage( unsigned char         *buffer,
+                                            const ParameterConfig *config )
+{
+    unsigned char *start = buffer;
+    unsigned int i;
+
+    PUT32LE( buffer, config->num_parameters );
+    buffer += sizeof( word );
+
+    for ( i = 0; i < config->num_parameters; ++i )
+    {
+        PUT32LE( buffer, config->param[i].type );
+        buffer += sizeof( word );
+        PUT32LE( buffer, config->param[i].value );
+        buffer += sizeof( word );
+    }
+
+    return (buffer - start);
+}
+#endif /* defined(TARGET) || defined(LINK_RECOVERY) || defined(TEST_PARAMS) */
+
+
+#if !defined(TARGET) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_BuildParamOptionsMessage
+ *  Purpose: write a parameter Options to a buffer in ADP format.
+ *
+ * see params.h for details
+ */
+unsigned int Angel_BuildParamOptionsMessage( unsigned char          *buffer,
+                                             const ParameterOptions *options )
+{
+    unsigned char *start = buffer;
+    unsigned int i, j;
+
+    PUT32LE( buffer, options->num_param_lists );
+    buffer += sizeof( word );
+
+    for ( i = 0; i < options->num_param_lists; ++i )
+    {
+        PUT32LE( buffer, options->param_list[i].type );
+        buffer += sizeof( word );
+        PUT32LE( buffer, options->param_list[i].num_options );
+        buffer += sizeof( word );
+        for ( j = 0; j < options->param_list[i].num_options; ++j )
+        {
+            PUT32LE( buffer, options->param_list[i].option[j] );
+            buffer += sizeof( word );
+        }
+    }
+
+    return (buffer - start);
+}
+#endif /* !defined(TARGET) || defined(TEST_PARAMS) */
+
+
+#if !defined(TARGET) || defined(LINK_RECOVERY) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_ReadParamConfigMessage
+ *  Purpose: read a parameter config from a buffer where it is in ADP format.
+ *
+ * see params.h for details
+ */
+bool Angel_ReadParamConfigMessage( const unsigned char *buffer,
+                                   ParameterConfig     *config )
+{
+    unsigned int word;
+    unsigned int i;
+
+    word = GET32LE( buffer );
+    buffer += sizeof( word );
+    if ( word > config->num_parameters )
+    {
+        WARN( "not enough space" );
+        return FALSE;
+    }
+    config->num_parameters = word;
+
+    for ( i = 0; i < config->num_parameters; ++i )
+    {
+        config->param[i].type = (ADP_Parameter)GET32LE( buffer );
+        buffer += sizeof( word );
+        config->param[i].value = GET32LE( buffer );
+        buffer += sizeof( word );
+    }
+
+    return TRUE;
+}
+#endif /* !defined(TARGET) || defined(LINK_RECOVERY) || defined(TEST_PARAMS) */
+
+
+#if defined(TARGET) || defined(TEST_PARAMS)
+/*
+ * Function: Angel_ReadParamOptionsMessage
+ *  Purpose: read a parameter options block from a buffer
+ *             where it is in ADP format.
+ *
+ * see params.h for details
+ */
+bool Angel_ReadParamOptionsMessage( const unsigned char *buffer,
+                                    ParameterOptions    *options )
+{
+    unsigned int word;
+    unsigned int i, j;
+
+    word = GET32LE( buffer );
+    buffer += sizeof( word );
+    if ( word > options->num_param_lists )
+    {
+        WARN( "not enough space" );
+        return FALSE;
+    }
+    options->num_param_lists = word;
+
+    for ( i = 0; i < options->num_param_lists; ++i )
+    {
+        ParameterList *list = &options->param_list[i];
+
+        list->type = (ADP_Parameter)GET32LE( buffer );
+        buffer += sizeof( word );
+        word = GET32LE( buffer );
+        buffer += sizeof( word );
+        if ( word > list->num_options )
+        {
+            WARN( "not enough list space" );
+            return FALSE;
+        }
+        list->num_options = word;
+
+        for ( j = 0; j < list->num_options; ++j )
+        {
+            list->option[j] = GET32LE( buffer );
+            buffer += sizeof( word );
+        }
+    }
+
+    return TRUE;
+}
+#endif /* defined(TARGET) || defined(TEST_PARAMS) */
+
+#endif /* !define(TARGET) || !defined(MINIMAL_ANGEL) || MINIMAL_ANGEL == 0 */
+
+/* EOF params.c */
diff --git a/gdb/rdi-share/params.h b/gdb/rdi-share/params.h
new file mode 100644
index 0000000..5b0757b
--- /dev/null
+++ b/gdb/rdi-share/params.h
@@ -0,0 +1,181 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Parameter negotiation structures and utilities
+ */
+
+#ifndef angel_params_h
+#define angel_params_h
+
+#include "angel.h"
+#include "adp.h"
+
+#ifndef TARGET
+# include "host.h"
+#endif
+
+/* A single parameter, with tag */
+typedef struct Parameter {
+      ADP_Parameter     type;
+      unsigned int      value;
+} Parameter;
+
+/* A list of parameter values, with tag */
+typedef struct ParameterList {
+      ADP_Parameter     type;
+      unsigned int      num_options;
+      unsigned int     *option; /* points to array of values */
+} ParameterList;
+
+/* A configuration of one or more parameters */
+typedef struct ParameterConfig {
+      unsigned int      num_parameters;
+      Parameter        *param;  /* pointer to array of Parameters */
+} ParameterConfig;
+
+/* A set of parameter options */
+typedef struct ParameterOptions {
+      unsigned int      num_param_lists;
+      ParameterList    *param_list; /* pointer to array of ParamLists */
+} ParameterOptions;
+
+/*
+ * Function: Angel_MatchParams
+ *  Purpose: find a configuration from the requested options which is
+ *           the best match from the supported options.
+ *
+ *   Params:
+ *              Input: requested      The offered set of parameters.
+ *                     supported      The supported set of parameters.
+ *
+ *            Returns: ptr to config  A match has been made, ptr to result
+ *                                      will remain valid until next call to
+ *                                      this function.
+ *                     NULL           Match not possible
+ */
+const ParameterConfig *Angel_MatchParams( const ParameterOptions *requested,
+                                          const ParameterOptions *supported );
+
+/*
+ * Function: Angel_FindParam
+ *  Purpose: find the value of a given parameter from a config.
+ *
+ *   Params:
+ *              Input: type     parameter type to find
+ *                     config   config to search
+ *             Output: value    parameter value if found
+ *
+ *            Returns: TRUE     parameter found
+ *                     FALSE    parameter not found
+ */
+bool Angel_FindParam( ADP_Parameter          type,
+                      const ParameterConfig *config,
+                      unsigned int          *value );
+
+/*
+ * Function: Angel_StoreParam
+ *  Purpose: store the value of a given parameter in a config.
+ *
+ *   Params:
+ *             In/Out: config   config to store in
+ *              Input: type     parameter type to store
+ *                     value    parameter value if found
+ *
+ *            Returns: TRUE     parameter found and new value stored
+ *                     FALSE    parameter not found
+ */
+bool Angel_StoreParam( ParameterConfig *config,
+                       ADP_Parameter    type,
+                       unsigned int     value );
+
+/*
+ * Function: Angel_FindParamList
+ *  Purpose: find the parameter list of a given parameter from an options.
+ *
+ *   Params:
+ *              Input: type     parameter type to find
+ *                     options  options block to search
+ *
+ *            Returns: pointer to list
+ *                     NULL     parameter not found
+ */
+ParameterList *Angel_FindParamList( const ParameterOptions *options,
+                                    ADP_Parameter           type );
+
+/*
+ * Function: Angel_BuildParamConfigMessage
+ *  Purpose: write a parameter config to a buffer in ADP format.
+ *
+ *   Params:
+ *              Input: buffer   where to write to
+ *                     config   the parameter config to write
+ *
+ *            Returns: number of characters written to buffer
+ */
+unsigned int Angel_BuildParamConfigMessage( unsigned char         *buffer,
+                                            const ParameterConfig *config );
+
+/*
+ * Function: Angel_BuildParamOptionsMessage
+ *  Purpose: write a parameter Options to a buffer in ADP format.
+ *
+ *   Params:
+ *              Input: buffer   where to write to
+ *                     options  the options block to write
+ *
+ *            Returns: number of characters written to buffer
+ */
+unsigned int Angel_BuildParamOptionsMessage( unsigned char          *buffer,
+                                             const ParameterOptions *options );
+
+/*
+ * Function: Angel_ReadParamConfigMessage
+ *  Purpose: read a parameter config from a buffer where it is in ADP format.
+ *
+ *   Params:
+ *              Input: buffer   where to read from
+ *             In/Out: config   the parameter config to read to, which must
+ *                              be set up on entry with a valid array, and
+ *                              the size of the array in num_parameters.
+ *
+ *            Returns: TRUE     okay
+ *                     FALSE    not enough space in config
+ */
+bool Angel_ReadParamConfigMessage( const unsigned char *buffer,
+                                   ParameterConfig     *config );
+
+/*
+ * Function: Angel_ReadParamOptionsMessage
+ *  Purpose: read a parameter options from a buffer
+ *             where it is in ADP format.
+ *
+ *   Params:
+ *              Input: buffer   where to read from
+ *             In/Out: options  the parameter options block to read to, 
+ *                                which must be set up on entry with a valid
+ *                                array, and the size of the array in
+ *                                num_parameters.  Each param_list must
+ *                                also be set up in the same way.
+ *
+ *            Returns: TRUE     okay
+ *                     FALSE    not enough space in options
+ */
+bool Angel_ReadParamOptionsMessage( const unsigned char *buffer,
+                                    ParameterOptions    *options );
+
+#endif /* ndef angel_params_h */
+
+/* EOF params.h */
diff --git a/gdb/rdi-share/rx.c b/gdb/rdi-share/rx.c
new file mode 100644
index 0000000..4f434f0
--- /dev/null
+++ b/gdb/rdi-share/rx.c
@@ -0,0 +1,361 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*-*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title:  Character reception engine
+ */
+
+#include <stdarg.h>    /* ANSI varargs support */
+#include "angel.h"     /* Angel system definitions */
+#include "endian.h"    /* Endian independant memory access macros */
+#include "crc.h"       /* crc generation definitions and headers */
+#include "rxtx.h"
+#include "channels.h"
+#include "buffers.h"
+#ifdef TARGET
+#  include "devdriv.h"
+#endif
+#include "logging.h"
+
+static re_status unexp_stx(struct re_state *rxstate);
+static re_status unexp_etx(struct re_state *rxstate);
+
+/* bitfield for the rx_engine state */
+typedef enum rx_state_flag{
+  RST_STX,
+  RST_TYP,
+  RST_LEN,
+  RST_DAT,
+  RST_CRC,
+  RST_ETX,
+  RST_ESC = (0x1 << 0x3)
+} rx_state_flag;
+
+void Angel_RxEngineInit(const struct re_config *rxconfig,
+                        struct re_state *rxstate)
+{
+  rxstate->rx_state = RST_STX;
+  rxstate->field_c = 0;
+  rxstate->index = 0;
+  rxstate->crc = 0;
+  rxstate->error = RE_OKAY;
+  rxstate->config = rxconfig;
+}
+
+re_status Angel_RxEngine(unsigned char new_ch, struct data_packet *packet,
+                         struct re_state *rxstate)
+{
+  /*
+   * TODO: add the flow control bits in
+   * Note: We test for the data field in a seperate case so we can
+   * completely avoid entering the switch for most chars
+   */
+
+  /* see if we're expecting a escaped char */
+  if ((rxstate->rx_state & RST_ESC) == RST_ESC)
+  {
+    /* unescape the char and unset the flag*/
+    new_ch &= ~serial_ESCAPE;
+#ifdef DO_TRACE
+    __rt_trace("rxe-echar-%2x ", new_ch);
+#endif
+    rxstate->rx_state &= ~RST_ESC;
+  }
+  else if ( (1 << new_ch) & rxstate->config->esc_set )
+  {
+    /* see if the incoming char is a special one */
+    if (new_ch == rxstate->config->esc)
+    {
+#ifdef DO_TRACE
+      __rt_trace("rxe-esc ");
+#endif
+      rxstate->rx_state |= RST_ESC;
+      return RS_IN_PKT;
+    }
+    else
+    {
+      /*
+       * must be a normal packet so do some unexpected etx/stx checking
+       * we haven't been told to escape or received an escape so unless
+       * we are expecting an stx or etx then we can take the unexpected 
+       * stx/etx trap
+       */
+      if ((new_ch == (rxstate->config->stx)) && (rxstate->rx_state != RST_STX))
+        return unexp_stx(rxstate);
+      if ((new_ch == (rxstate->config->etx)) && (rxstate->rx_state != RST_ETX))
+        return unexp_etx(rxstate);
+    }
+  }
+
+  if (rxstate->rx_state == RST_DAT)
+  {
+    /*
+     * do this to speed up the common case, no real penalty for
+     * other cases 
+     */
+#ifdef DO_TRACE
+    __rt_trace("rxe-dat ");
+#endif
+
+    rxstate->crc = crc32(&new_ch, 1, rxstate->crc);
+    (packet->data)[rxstate->index++] = (unsigned int)new_ch & 0xff;
+
+    if (rxstate->index == packet->len)
+      rxstate->rx_state = RST_CRC;
+
+    return RS_IN_PKT;
+  }
+
+  /*
+   * Now that the common case is out of the way we can test for everything
+   * else without worrying quite so much about the speed, changing the
+   * order to len,crc,stx,etx,typ might gain a tiny bit of speed but lets
+   * leave that for the moment
+   */
+  switch (rxstate->rx_state)
+  {
+    case RST_STX:
+      if (new_ch == rxstate->config->stx)
+      {
+        rxstate->rx_state = RST_TYP;
+        rxstate->error = RE_OKAY;
+        rxstate->crc = startCRC32;
+        rxstate->index = 0;
+        return RS_IN_PKT;
+      }
+      else
+      {
+        rxstate->error = RE_OKAY;
+        return RS_WAIT_PKT;
+      }
+
+    case RST_TYP:
+      packet->type = (DevChanID)new_ch;
+      rxstate->rx_state = RST_LEN;
+      rxstate->error = RE_OKAY;
+      rxstate->field_c = 0; /* set up here for the length that follows */
+#ifdef DO_TRACE 
+      __rt_trace("rxe-type-%2x ", packet->type);
+#endif
+      rxstate->crc = crc32(&new_ch, 1, rxstate->crc);
+
+      return RS_IN_PKT;
+
+    case RST_LEN:
+      rxstate->crc = crc32(&new_ch, 1, rxstate->crc);
+
+      if (rxstate->field_c++ == 0)
+      {
+        /* first length byte */
+        packet->len = ((unsigned int)new_ch) << 8;
+        return RS_IN_PKT;
+      }
+      else
+      {
+        /* got the whole legth */
+        packet->len |= new_ch;
+#ifdef DO_TRACE
+        __rt_trace("rxe-len-%4x\n", packet->len);
+#endif
+
+        /* check that the length is ok */
+        if (packet->len == 0)
+        {
+          /* empty pkt */
+          rxstate->field_c = 0;
+          rxstate->rx_state = RST_CRC;
+          return RS_IN_PKT;
+        }
+        else
+        {
+          if (packet->data == NULL)
+          {
+            /* need to alloc the data buffer */
+            if (!rxstate->config->ba_callback(
+                packet, rxstate->config->ba_data)) {
+              rxstate->rx_state = RST_STX;
+              rxstate->error = RE_INTERNAL;
+              return RS_BAD_PKT;
+            }
+          }
+
+          if (packet->len > packet->buf_len)
+          {
+            /* pkt bigger than buffer */
+            rxstate->field_c = 0;
+            rxstate->rx_state = RST_STX;
+            rxstate->error = RE_LEN;
+            return RS_BAD_PKT;
+          }
+          else
+          {
+            /* packet ok */
+            rxstate->field_c = 0;
+            rxstate->rx_state = RST_DAT;
+            return RS_IN_PKT;
+          }
+        }
+      }
+
+    case RST_DAT:
+      /* dummy case (dealt with earlier) */
+#ifdef ASSERTIONS_ENABLED
+      __rt_warning("ERROR: hit RST_dat in switch\n");
+#endif
+      rxstate->rx_state = RST_STX;
+      rxstate->error = RE_INTERNAL;
+      return RS_BAD_PKT;
+
+    case RST_CRC:
+      if (rxstate->field_c == 0)
+        packet->crc = 0;
+
+      packet->crc |= (new_ch & 0xFF) << ((3 - rxstate->field_c) * 8);
+      rxstate->field_c++;
+
+      if (rxstate->field_c == 4)
+      {
+        /* last crc field */
+        rxstate->field_c = 0;
+        rxstate->rx_state = RST_ETX;
+#ifdef DO_TRACE
+        __rt_trace("rxe-rcrc-%8x ", packet->crc);
+#endif
+      }
+
+      return RS_IN_PKT;
+
+    case RST_ETX:
+      if (new_ch == rxstate->config->etx)
+      {
+#if defined(DEBUG) && !defined(NO_PKT_DATA)
+        {
+          int c;
+# ifdef DO_TRACE
+          __rt_trace("\n");
+# endif
+          __rt_info("RXE Data =");
+          for (c=0; c < packet->len; c++)
+            __rt_info("%02x", packet->data[c]);
+          __rt_info("\n"); 
+        }
+#endif
+
+        /* check crc */
+        if (rxstate->crc == packet->crc)
+        {
+          /* crc ok */
+          rxstate->rx_state = RST_STX;
+          rxstate->field_c = 0;
+          return RS_GOOD_PKT;
+        }
+        else
+        {
+#ifdef ASSERTIONS_ENABLED
+          __rt_warning("Bad crc, rx calculates it should be 0x%x\n", rxstate->crc);
+#endif
+          rxstate->rx_state = RST_STX;
+          rxstate->error = RE_CRC;
+          return RS_BAD_PKT;
+        }
+      }
+      else if (new_ch == rxstate->config->stx)
+        return unexp_stx(rxstate);
+      else
+      {
+        rxstate->rx_state = RST_STX;
+        rxstate->error = RE_NETX;
+        return RS_BAD_PKT;
+      }
+
+    default:
+#ifdef ASSERTIONS_ENABLED
+      __rt_warning("ERROR fell through rxengine\n");
+#endif
+      rxstate->rx_state = RST_STX;
+      rxstate->error = RE_INTERNAL;
+      return RS_BAD_PKT;
+  }
+}
+
+static re_status unexp_stx(struct re_state *rxstate)
+{
+#ifdef ASSERTIONS_ENABLED
+  __rt_warning("Unexpected stx\n");
+#endif
+  rxstate->crc = startCRC32;
+  rxstate->index = 0;
+  rxstate->rx_state = RST_TYP;
+  rxstate->error = RE_U_STX;
+  rxstate->field_c = 0;
+  return RS_BAD_PKT;
+}
+
+static re_status unexp_etx(struct re_state *rxstate)
+{
+#ifdef ASSERTIONS_ENABLED
+  __rt_warning("Unexpected etx, rxstate: index= 0x%2x, field_c=0x%2x, state=0x%2x\n", rxstate->index, rxstate->field_c, rxstate->rx_state);
+#endif
+  rxstate->crc = 0;
+  rxstate->index = 0;
+  rxstate->rx_state = RST_STX;
+  rxstate->error = RE_U_ETX;
+  rxstate->field_c = 0;
+  return RS_BAD_PKT;
+}
+
+/*
+ * This can be used as the buffer allocation callback for the rx engine,
+ * and makes use of angel_DD_GetBuffer() [in devdrv.h]. 
+ *
+ * Saves duplicating this callback function in every device driver that
+ * uses the rx engine.
+ *
+ * Note that this REQUIRES that the device id is installed as ba_data
+ * in the rx engine config structure for the driver.
+ */
+bool angel_DD_RxEng_BufferAlloc( struct data_packet *packet, void *cb_data )
+{
+#ifdef TARGET
+    DeviceID devid = (DeviceID)cb_data;
+#else
+    IGNORE(cb_data);
+#endif
+
+    if ( packet->type < DC_NUM_CHANNELS )
+    {
+        /* request a buffer down from the channels layer */
+#ifdef TARGET
+        packet->data = angel_DD_GetBuffer( devid, packet->type,
+                                           packet->len              );
+#else
+        packet->data = malloc(packet->len);
+#endif
+        if ( packet->data == NULL )
+           return FALSE;
+        else
+        {
+            packet->buf_len = packet->len;
+            return TRUE;
+        }
+    }
+    else
+    {
+        /* bad type field */
+        return FALSE;
+    }
+}
+
+/* EOF rx.c */
diff --git a/gdb/rdi-share/rxtx.h b/gdb/rdi-share/rxtx.h
new file mode 100644
index 0000000..204e998
--- /dev/null
+++ b/gdb/rdi-share/rxtx.h
@@ -0,0 +1,263 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*-*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *   Project: ANGEL
+ *
+ *     Title:  Definitions required for the rx and tx engines
+ */
+
+#ifndef angel_rxtx_h
+#define angel_rxtx_h
+
+
+/*
+ * we need a definition for bool, which is "system" dependent
+ */
+#ifdef TARGET
+# include "angel.h"
+#else
+# include "host.h"
+#endif
+
+#include "devclnt.h"
+
+/* return status codes for the rx engine */
+typedef enum re_status {
+  RS_WAIT_PKT,
+  RS_IN_PKT,
+  RS_BAD_PKT,
+  RS_GOOD_PKT
+} re_status;
+
+/* return status codes for the tx engine */
+typedef enum te_status {
+  TS_IDLE,
+  TS_IN_PKT,
+  TS_DONE_PKT
+} te_status;
+
+
+/*
+ * required serial definitions, they should all be <32, refer to the
+ * re_config struct comments for more details
+ */
+#define serial_STX    (0x1c) /* data packet start */
+#define serial_ETX    (0x1d) /* packet end */
+#define serial_ESC    (0x1b) /* standard escape character */
+#define serial_XON    (0x11) /* software flow control - enable transmission */
+#define serial_XOFF   (0x13) /* software flow control - disable transmission */
+
+/*
+ * All other characters are transmitted clean. If any of the above
+ * characters need to be transmitted as part of the serial data stream
+ * then the character will be preceded by the "serial_ESC" character,
+ * and then the required character transmitted (OR-ed with the
+ * "serial_ESCAPE" value, to ensure that the serial stream never has
+ * any of the exceptional characters generated by data transfers).
+ */
+
+#define serial_ESCAPE   (0x40)  /* OR-ed with escaped characters */
+
+/* bad packet error codes */
+typedef enum re_error {
+  RE_OKAY,
+  RE_U_STX,
+  RE_U_ETX,
+  RE_LEN,
+  RE_CRC,
+  RE_NETX,
+  RE_INTERNAL
+} re_error;
+
+/* a decoded packet */
+struct data_packet {
+  unsigned short  buf_len;      /* should be set by caller */
+  DevChanID       type;         /* valid when status is RS_GOOD_PKT */
+  unsigned short  len;          /* --"--                            */
+  unsigned int    crc;          /* crc for the unescaped pkt */
+  unsigned char   *data;        /* should be set by caller */
+};
+
+/*
+ * Purpose: typedef for flow control function
+ *
+ *  Params:
+ *          Input:  fc_char  the flow control character in question
+ *          In/Out: cb_data  callback data as set in the fc_data
+ *                             field of re_config, typically device id
+ *
+ * This callback would tpyically respond to received XON and XOFF
+ * characters by controlling the transmit side of the device.
+ */
+typedef void (*fc_cb_func)(char fc_char, void *cb_data);
+
+
+/*
+ * Purpose: typedef for the function to alloc the data buffer 
+ *
+ *  Params:
+ *          In/Out: packet    the data packet: len and type will be set on
+ *                              entry, and buf_len and data should
+ *                              be set by this routine if successful.
+ *                  cb_data   callback data as set in the ba_data
+ *                              field of re_config, typically device id
+ *
+ *         Returns: TRUE      buffer allocated okay
+ *                  FALSE     couldn't allocate buffer of required size
+ *                              for given type
+ *
+ * This callback should attempt to acquire a buffer for the data portion
+ * of the packet which is currently being received, based on the len and 
+ * type fields supplied in packet.
+ *
+ * angel_DD_RxEng_BufferAlloc() is supplied for use as this callback,
+ * and will be sufficient for most devices.
+ */
+typedef bool (*BufferAlloc_CB_Fn)(struct data_packet *packet, void *cb_data);
+
+
+/*
+ * The static info needed by the engine, may vary per device.
+ *
+ * fc_set and esc_set are bitmaps, e.g. bit 3 == charcode 3 == ASCII ETX.
+ * Thus any of the first 32 charcodes can be set for flow control or to
+ * be escaped.
+ * 
+ * Note that esc_set should include all of fc_set, and should have bits
+ * set for stx, etx and esc, as a minimum.
+ *
+ * If character codes > 31 need to be used then fc_set and esc_set
+ * and their handling can be extended to use arrays and bit manipulation
+ * macros, potentially up to the full 256 possible chars.
+ *
+ * Note too that this could/should be shared with the tx engine.
+ */
+
+struct re_config {
+  unsigned char     stx;                  /* the STX char for this device */
+  unsigned char     etx;                  /* the ETX --"--                */
+  unsigned char     esc;                  /* the ESC --"--                */
+  unsigned int      fc_set;               /* bitmap of flow control chars */
+  unsigned int      esc_set;              /* bitmap of special chars      */
+  fc_cb_func        fc_callback;          /* flow control callback func   */
+  void              *fc_data;             /* data to pass to fc_callback  */
+  BufferAlloc_CB_Fn ba_callback;          /* buffer alloc callback        */
+  void              *ba_data;             /* data to pass to ba_calback   */
+};
+
+/* the dynamic info needed by the rx engine */
+struct re_state {
+  unsigned char          rx_state; /* 3 bits pkt state, 1 prepro state */
+  unsigned short         field_c;  /* chars left in current field */
+  unsigned short         index;    /* index into buffer */
+  unsigned int           crc;      /* crc accumulator */
+  re_error               error;    /* valid only if status is RS_BAD_PKT */
+  const struct re_config *config;  /* pointer to static config */
+};
+
+/* dynamic state info needed by the tx engine */
+struct te_state {
+  unsigned short         field_c;  /* position in current field */
+  unsigned char          tx_state; /* encodes n,e, and f (2+1+2=5 bits) */
+  unsigned char          encoded;  /* escape-encoded char for transmission */
+  const struct re_config *config;  /* pointer to static config */
+  unsigned int           crc;      /* space for CRC (before escaping) */
+};
+
+/*
+ * Function: Angel_RxEngineInit
+ *  Purpose: Initialise state (during device init) for engine.
+ *
+ *   Params:
+ *              Input: config   static config info
+ *             In/Out: state    internal state
+ */
+
+void Angel_RxEngineInit(const struct re_config *config,
+                        struct re_state *state);
+
+/*
+ * Function: Angel_RxEngine
+ *  Purpose: Rx Engine for character-based devices
+ *
+ *   Params:
+ *              Input: new_ch       the latest character
+ *
+ *             In/Out: packet       details of packet
+ *                                   packet.buf_len and packet.data must
+ *                                   be set on entry!
+ *                     state        internal state, intially set by
+ *                                   angel_RxEngineInit()
+ *
+ *            Returns: re_status (see above)
+ *
+ */
+
+re_status Angel_RxEngine(unsigned char new_ch, struct data_packet *packet,
+                         struct re_state *state);
+
+/*
+ * This can be used as the buffer allocation callback for the rx engine,
+ * and will make use of angel_DD_GetBuffer() [in devdrv.h]. 
+ *
+ * Saves duplicating this callback function in every device driver that
+ * uses the rx engine.
+ *
+ * Note that this REQUIRES that the device id is installed as ba_data
+ * in the rx engine config structure for the driver.
+ */
+bool angel_DD_RxEng_BufferAlloc( struct data_packet *packet, void *cb_data );
+
+/*
+ * Function: Angel_TxEngineInit
+ *  Purpose: Set up tx engine at start of new packet, calculate CRC etc.
+ *           (This should perform the actions described under
+ *             "Initialisation" above)
+ *
+ *   Params:
+ *              Input: config   static config info
+ *                     packet   the packet to transmit
+ *             In/Out: state    internal state
+ */
+
+void Angel_TxEngineInit(const struct re_config   *config,
+                        const struct data_packet *packet, 
+                        struct te_state    *state);
+
+/*
+ * Function: Angel_TxEngine
+ *  Purpose: Tx Engine for character-based devices
+ *
+ *   Params:
+ *              Input: packet       details of packet
+ *                                   packet.len, packet.data and
+ *                                   packet.type must
+ *                                   be set on entry!
+ *             In/Out: state        internal state, intially set by
+ *                                   angel_TxEngineStart()
+ *             Output: tx_ch        the character to be transmitted 
+ *                                   (NOT SET if return code is TS_IDLE)
+ *
+ *            Returns: te_status (see above)
+ */
+
+te_status Angel_TxEngine(const struct data_packet  *packet,
+                         struct te_state *state,
+                         unsigned char *tx_ch);
+
+
+
+#endif /* !defined(angel_rxtx_h) */
+
+/*  EOF rxtx.h */
diff --git a/gdb/rdi-share/serdrv.c b/gdb/rdi-share/serdrv.c
new file mode 100644
index 0000000..43fd5a0
--- /dev/null
+++ b/gdb/rdi-share/serdrv.c
@@ -0,0 +1,649 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * serdrv.c - Synchronous Serial Driver for Angel.
+ *            This is nice and simple just to get something going.
+ */
+
+#ifdef __hpux
+#  define _POSIX_SOURCE 1
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "crc.h"
+#include "devices.h"
+#include "buffers.h"
+#include "rxtx.h"
+#include "hostchan.h"
+#include "params.h"
+#include "logging.h"
+
+#ifdef COMPILING_ON_WINDOWS
+#  undef   ERROR
+#  undef   IGNORE
+#  include <windows.h>
+#  include "angeldll.h"
+#  include "comb_api.h"
+#else
+#  ifdef __hpux
+#    define _TERMIOS_INCLUDED
+#    include <sys/termio.h>
+#    undef _TERMIOS_INCLUDED
+#  else
+#    include <termios.h>
+#  endif
+#  include "unixcomm.h"
+#endif
+
+#ifndef UNUSED
+#  define UNUSED(x) (x = x)      /* Silence compiler warnings */
+#endif
+ 
+#define MAXREADSIZE 512
+#define MAXWRITESIZE 512
+
+#define SERIAL_FC_SET  ((1<<serial_XON)|(1<<serial_XOFF))
+#define SERIAL_CTL_SET ((1<<serial_STX)|(1<<serial_ETX)|(1<<serial_ESC))
+#define SERIAL_ESC_SET (SERIAL_FC_SET|SERIAL_CTL_SET)
+
+static const struct re_config config = {
+    serial_STX, serial_ETX, serial_ESC, /* self-explanatory?               */
+    SERIAL_FC_SET,                      /* set of flow-control characters  */
+    SERIAL_ESC_SET,                     /* set of characters to be escaped */
+    NULL /* serial_flow_control */, NULL  ,    /* what to do with FC chars */
+    angel_DD_RxEng_BufferAlloc, NULL                /* how to get a buffer */
+};
+
+static struct re_state rxstate;
+
+typedef struct writestate {
+  unsigned int wbindex;
+  /*  static te_status testatus;*/
+  unsigned char writebuf[MAXWRITESIZE];
+  struct te_state txstate;
+} writestate;
+
+static struct writestate wstate;
+
+/*
+ * The set of parameter options supported by the device
+ */
+static unsigned int baud_options[] = {
+#ifdef __hpux
+    115200, 57600, 
+#endif
+    38400, 19200, 9600
+};
+
+static ParameterList param_list[] = {
+    { AP_BAUD_RATE,
+      sizeof(baud_options)/sizeof(unsigned int),
+      baud_options }
+};
+
+static const ParameterOptions serial_options = {
+    sizeof(param_list)/sizeof(ParameterList), param_list };
+
+/* 
+ * The default parameter config for the device
+ */
+static Parameter param_default[] = {
+    { AP_BAUD_RATE, 9600 }
+};
+
+static ParameterConfig serial_defaults = {
+    sizeof(param_default)/sizeof(Parameter), param_default };
+
+/*
+ * The user-modified options for the device
+ */
+static unsigned int user_baud_options[sizeof(baud_options)/sizeof(unsigned)];
+
+static ParameterList param_user_list[] = {
+    { AP_BAUD_RATE,
+      sizeof(user_baud_options)/sizeof(unsigned),
+      user_baud_options }
+};
+
+static ParameterOptions user_options = {
+    sizeof(param_user_list)/sizeof(ParameterList), param_user_list };
+
+static bool user_options_set;
+
+/* forward declarations */
+static int serial_reset( void );
+static int serial_set_params( const ParameterConfig *config );
+static int SerialMatch(const char *name, const char *arg);
+
+static void process_baud_rate( unsigned int target_baud_rate )
+{
+    const ParameterList *full_list;
+    ParameterList       *user_list;
+
+    /* create subset of full options */
+    full_list = Angel_FindParamList( &serial_options, AP_BAUD_RATE );
+    user_list = Angel_FindParamList( &user_options,   AP_BAUD_RATE );
+
+    if ( full_list != NULL && user_list != NULL )
+    {
+        unsigned int i, j;
+        unsigned int def_baud = 0;
+
+        /* find lower or equal to */
+        for ( i = 0; i < full_list->num_options; ++i )
+           if ( target_baud_rate >= full_list->option[i] )
+           {
+               /* copy remaining */
+               for ( j = 0; j < (full_list->num_options - i); ++j )
+                  user_list->option[j] = full_list->option[i+j];
+               user_list->num_options = j;
+
+               /* check this is not the default */
+               Angel_FindParam( AP_BAUD_RATE, &serial_defaults, &def_baud );
+               if ( (j == 1) && (user_list->option[0] == def_baud) )
+               {
+#ifdef DEBUG
+                   printf( "user selected default\n" );
+#endif
+               }
+               else
+               {
+                   user_options_set = TRUE;
+#ifdef DEBUG
+                   printf( "user options are: " );
+                   for ( j = 0; j < user_list->num_options; ++j )
+                      printf( "%u ", user_list->option[j] );
+                   printf( "\n" );
+#endif
+               }
+
+               break;   /* out of i loop */
+           }
+                
+#ifdef DEBUG
+        if ( i >= full_list->num_options )
+           printf( "couldn't match baud rate %u\n", target_baud_rate );
+#endif
+    }
+#ifdef DEBUG
+    else
+       printf( "failed to find lists\n" );
+#endif
+}
+
+static int SerialOpen(const char *name, const char *arg)
+{
+    const char *port_name = name;
+
+#ifdef DEBUG
+    printf("SerialOpen: name %s arg %s\n", name, arg ? arg : "<NULL>");
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    if (IsOpenSerial()) return -1;
+#else
+    if (Unix_IsSerialInUse()) return -1;
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    if (SerialMatch(name, arg) != adp_ok)
+        return adp_failed;
+#else
+    port_name = Unix_MatchValidSerialDevice(port_name);
+# ifdef DEBUG
+    printf("translated port to %s\n", port_name == 0 ? "NULL" : port_name);
+# endif
+    if (port_name == 0) return adp_failed;
+#endif
+
+    user_options_set = FALSE;
+
+    /* interpret and store the arguments */
+    if ( arg != NULL )
+    {
+        unsigned int target_baud_rate;
+        target_baud_rate = (unsigned int)strtoul(arg, NULL, 10);
+        if (target_baud_rate > 0)
+        {
+#ifdef DEBUG
+            printf( "user selected baud rate %u\n", target_baud_rate );
+#endif
+            process_baud_rate( target_baud_rate );
+        }
+#ifdef DEBUG
+        else
+           printf( "could not understand baud rate %s\n", arg );
+#endif
+    }
+
+#ifdef COMPILING_ON_WINDOWS
+    {
+        int port = IsValidDevice(name);
+        if (OpenSerial(port, FALSE) != COM_OK)
+            return -1;
+    }
+#else
+    if (Unix_OpenSerial(port_name) < 0)
+      return -1;
+#endif
+
+    serial_reset();
+
+#if defined(__unix) || defined(__CYGWIN32__)
+    Unix_ioctlNonBlocking();
+#endif
+
+    Angel_RxEngineInit(&config, &rxstate);
+    /*
+     * DANGER!: passing in NULL as the packet is ok for now as it is just
+     * IGNOREd but this may well change
+     */
+    Angel_TxEngineInit(&config, NULL, &wstate.txstate); 
+    return 0;
+}
+
+static int SerialMatch(const char *name, const char *arg)
+{
+    UNUSED(arg);
+#ifdef COMPILING_ON_WINDOWS
+    if (IsValidDevice(name) == COM_DEVICENOTVALID)
+        return -1;
+    else
+        return 0;
+#else
+    return Unix_MatchValidSerialDevice(name) == 0 ? -1 : 0;
+#endif
+}
+
+static void SerialClose(void)
+{
+#ifdef DO_TRACE
+    printf("SerialClose()\n");
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    CloseSerial();
+#else
+    Unix_CloseSerial();
+#endif
+}
+
+static int SerialRead(DriverCall *dc, bool block) {
+  static unsigned char readbuf[MAXREADSIZE];
+  static int rbindex=0;
+
+  int nread;
+  int read_errno;
+  int c=0;
+  re_status restatus;
+  int ret_code = -1;            /* assume bad packet or error */
+
+  /* must not overflow buffer and must start after the existing data */
+#ifdef COMPILING_ON_WINDOWS
+  {
+    BOOL dummy = FALSE;
+    nread = BytesInRXBufferSerial();
+
+    if (nread > MAXREADSIZE - rbindex)
+      nread = MAXREADSIZE - rbindex;
+
+    if ((read_errno = ReadSerial(readbuf+rbindex, nread, &dummy)) == COM_READFAIL)
+    {
+        MessageBox(GetFocus(), "Read error\n", "Angel", MB_OK | MB_ICONSTOP);
+        return -1;   /* SJ - This really needs to return a value, which is picked up in */
+                     /*      DevSW_Read as meaning stop debugger but don't kill. */
+    }
+    else if (pfnProgressCallback != NULL && read_errno == COM_OK)
+    {
+      progressInfo.nRead += nread;
+      (*pfnProgressCallback)(&progressInfo);
+    }
+  }
+#else
+  nread = Unix_ReadSerial(readbuf+rbindex, MAXREADSIZE-rbindex, block);
+  read_errno = errno;
+#endif
+
+  if ((nread > 0) || (rbindex > 0)) {
+
+#ifdef DO_TRACE
+    printf("[%d@%d] ", nread, rbindex);
+#endif
+
+    if (nread>0)
+       rbindex = rbindex+nread;
+
+    do {
+      restatus = Angel_RxEngine(readbuf[c], &(dc->dc_packet), &rxstate);
+#ifdef DO_TRACE
+      printf("<%02X ",readbuf[c]);
+      if (!(++c % 16))
+          printf("\n");
+#else
+      c++;
+#endif
+    } while (c<rbindex &&
+             ((restatus == RS_IN_PKT) || (restatus == RS_WAIT_PKT)));
+
+#ifdef DO_TRACE
+   if (c % 16)
+        printf("\n");
+#endif
+
+    switch(restatus) {
+      
+      case RS_GOOD_PKT:
+        ret_code = 1;
+        /* fall through to: */
+
+      case RS_BAD_PKT:
+        /*
+         * We now need to shuffle any left over data down to the
+         * beginning of our private buffer ready to be used 
+         *for the next packet 
+         */
+#ifdef DO_TRACE
+        printf("SerialRead() processed %d, moving down %d\n", c, rbindex-c);
+#endif
+        if (c != rbindex) memmove((char *) readbuf, (char *) (readbuf+c),
+                                  rbindex-c);
+        rbindex -= c;
+        break;
+
+      case RS_IN_PKT:
+      case RS_WAIT_PKT:
+        rbindex = 0;            /* will have processed all we had */
+        ret_code = 0;
+        break;
+
+      default:
+#ifdef DEBUG
+        printf("Bad re_status in serialRead()\n");
+#endif
+        break;
+    }
+  } else if (nread == 0)
+    ret_code = 0;               /* nothing to read */
+  else if (read_errno == ERRNO_FOR_BLOCKED_IO) /* nread < 0 */
+    ret_code = 0;
+
+#ifdef DEBUG
+  if ((nread<0) && (read_errno!=ERRNO_FOR_BLOCKED_IO))
+    perror("read() error in serialRead()");
+#endif
+
+  return ret_code;
+}
+
+
+static int SerialWrite(DriverCall *dc) {
+  int nwritten = 0;
+  te_status testatus = TS_IN_PKT;
+
+  if (dc->dc_context == NULL) {
+    Angel_TxEngineInit(&config, &(dc->dc_packet), &(wstate.txstate));
+    wstate.wbindex = 0;
+    dc->dc_context = &wstate;
+  }
+
+  while ((testatus == TS_IN_PKT) && (wstate.wbindex < MAXWRITESIZE))
+  {
+    /* send the raw data through the tx engine to escape and encapsulate */
+    testatus = Angel_TxEngine(&(dc->dc_packet), &(wstate.txstate),
+                              &(wstate.writebuf)[wstate.wbindex]);
+    if (testatus != TS_IDLE) wstate.wbindex++;
+  }
+
+  if (testatus == TS_IDLE) {
+#ifdef DEBUG
+    printf("SerialWrite: testatus is TS_IDLE during preprocessing\n");
+#endif
+  }
+
+#ifdef DO_TRACE
+  { 
+    int i = 0;
+
+    while (i<wstate.wbindex)
+    {
+        printf(">%02X ",wstate.writebuf[i]);
+
+        if (!(++i % 16))
+            printf("\n");
+    }
+    if (i % 16)
+        printf("\n");
+  }
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+  if (WriteSerial(wstate.writebuf, wstate.wbindex) == COM_OK)
+  {
+    nwritten = wstate.wbindex;
+    if (pfnProgressCallback != NULL)
+    {
+      progressInfo.nWritten += nwritten;
+      (*pfnProgressCallback)(&progressInfo);
+    }
+  }
+  else
+  {
+      MessageBox(GetFocus(), "Write error\n", "Angel", MB_OK | MB_ICONSTOP);
+      return -1;   /* SJ - This really needs to return a value, which is picked up in */
+                   /*      DevSW_Read as meaning stop debugger but don't kill. */
+  }
+#else
+  nwritten = Unix_WriteSerial(wstate.writebuf, wstate.wbindex);
+
+  if (nwritten < 0) {
+    nwritten=0;
+  }
+#endif
+
+#ifdef DEBUG
+  if (nwritten > 0)
+    printf("Wrote %#04x bytes\n", nwritten);
+#endif
+
+  if ((unsigned) nwritten == wstate.wbindex && 
+      (testatus == TS_DONE_PKT || testatus == TS_IDLE)) {
+
+    /* finished sending the packet */
+
+#ifdef DEBUG
+    printf("SerialWrite: calling Angel_TxEngineInit after sending packet (len=%i)\n",wstate.wbindex);
+#endif
+    testatus = TS_IN_PKT;
+    wstate.wbindex = 0;
+    return 1;
+  }
+  else {
+#ifdef DEBUG
+    printf("SerialWrite: Wrote part of packet wbindex=%i, nwritten=%i\n",
+           wstate.wbindex, nwritten);
+#endif
+   
+    /*
+     *  still some data left to send shuffle whats left down and reset
+     * the ptr
+     */
+    memmove((char *) wstate.writebuf, (char *) (wstate.writebuf+nwritten),
+            wstate.wbindex-nwritten);
+    wstate.wbindex -= nwritten;
+    return 0;
+  }
+  return -1;
+}
+
+
+static int serial_reset( void )
+{
+#ifdef DEBUG
+    printf( "serial_reset\n" );
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    FlushSerial();
+#else
+    Unix_ResetSerial();
+#endif
+
+    return serial_set_params( &serial_defaults );
+}
+
+
+static int find_baud_rate( unsigned int *speed )
+{
+    static struct {
+          unsigned int baud;
+          int termiosValue;
+    } possibleBaudRates[] = {
+#if defined(__hpux)
+        {115200,_B115200}, {57600,_B57600},
+#endif
+#ifdef COMPILING_ON_WINDOWS
+        {38400,CBR_38400}, {19200,CBR_19200}, {9600, CBR_9600}, {0,0}
+#else
+        {38400,B38400}, {19200,B19200}, {9600, B9600}, {0,0}
+#endif
+    };
+    unsigned int i;
+
+    /* look for lower or matching -- will always terminate at 0 end marker */
+    for ( i = 0; possibleBaudRates[i].baud > *speed; ++i )
+       /* do nothing */ ;
+
+    if ( possibleBaudRates[i].baud > 0 )
+       *speed = possibleBaudRates[i].baud;
+
+    return possibleBaudRates[i].termiosValue;
+}
+
+
+static int serial_set_params( const ParameterConfig *config )
+{
+    unsigned int speed;
+    int termios_value;
+
+#ifdef DEBUG
+    printf( "serial_set_params\n" );
+#endif
+
+    if ( ! Angel_FindParam( AP_BAUD_RATE, config, &speed ) )
+    {
+#ifdef DEBUG
+        printf( "speed not found in config\n" );
+#endif
+        return DE_OKAY;
+    }
+
+    termios_value = find_baud_rate( &speed );
+    if ( termios_value == 0 )
+    {
+#ifdef DEBUG
+        printf( "speed not valid: %u\n", speed );
+#endif
+        return DE_OKAY;
+    }
+
+#ifdef DEBUG
+    printf( "setting speed to %u\n", speed );
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    SetBaudRate((WORD)termios_value);
+#else
+    Unix_SetSerialBaudRate(termios_value);
+#endif
+
+    return DE_OKAY;
+}
+
+
+static int serial_get_user_params( ParameterOptions **p_options )
+{
+#ifdef DEBUG
+    printf( "serial_get_user_params\n" );
+#endif
+
+    if ( user_options_set )
+    {
+        *p_options = &user_options;
+    }
+    else
+    {
+        *p_options = NULL;
+    }
+
+    return DE_OKAY;
+}
+
+
+static int serial_get_default_params( ParameterConfig **p_config )
+{
+#ifdef DEBUG
+    printf( "serial_get_default_params\n" );
+#endif
+
+    *p_config = (ParameterConfig *) &serial_defaults;
+    return DE_OKAY;
+}
+
+
+static int SerialIoctl(const int opcode, void *args) {
+
+    int ret_code;
+
+#ifdef DEBUG
+    printf( "SerialIoctl: op %d arg %p\n", opcode, args ? args : "<NULL>");
+#endif
+
+    switch (opcode)
+    {
+       case DC_RESET:         
+           ret_code = serial_reset();
+           break;
+
+       case DC_SET_PARAMS:     
+           ret_code = serial_set_params((const ParameterConfig *)args);
+           break;
+
+       case DC_GET_USER_PARAMS:     
+           ret_code = serial_get_user_params((ParameterOptions **)args);
+           break;
+
+       case DC_GET_DEFAULT_PARAMS:
+           ret_code = serial_get_default_params((ParameterConfig **)args);
+           break;
+
+       default:               
+           ret_code = DE_BAD_OP;
+           break;
+    }
+
+  return ret_code;
+}
+
+DeviceDescr angel_SerialDevice = {
+    "SERIAL",
+    SerialOpen,
+    SerialMatch,
+    SerialClose,
+    SerialRead,
+    SerialWrite,
+    SerialIoctl
+};
diff --git a/gdb/rdi-share/serpardr.c b/gdb/rdi-share/serpardr.c
new file mode 100644
index 0000000..604d048
--- /dev/null
+++ b/gdb/rdi-share/serpardr.c
@@ -0,0 +1,730 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ * serpardv.c - Serial/Parallel Driver for Angel.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "crc.h"
+#include "devices.h"
+#include "buffers.h"
+#include "rxtx.h"
+#include "hostchan.h"
+#include "params.h"
+#include "logging.h"
+#include "hsys.h"
+
+#ifdef COMPILING_ON_WINDOWS
+#  undef   ERROR
+#  undef   IGNORE
+#  include <windows.h>
+#  include "angeldll.h"
+#  include "comb_api.h"
+#else
+#  ifdef __hpux
+#    define _TERMIOS_INCLUDED
+#    include <sys/termio.h>
+#    undef _TERMIOS_INCLUDED
+#  else
+#    include <termios.h>
+#  endif
+#  include "unixcomm.h"
+#endif
+
+#ifndef UNUSED
+#  define UNUSED(x) (x = x)     /* Silence compiler warnings */
+#endif
+
+#define MAXREADSIZE     512
+#define MAXWRITESIZE    512
+
+#define SERPAR_FC_SET  ((1 << serial_XON) | (1 << serial_XOFF))
+#define SERPAR_CTL_SET ((1 << serial_STX) | (1 << serial_ETX) | \
+                        (1 << serial_ESC))
+#define SERPAR_ESC_SET (SERPAR_FC_SET | SERPAR_CTL_SET)
+
+static const struct re_config config = {
+    serial_STX, serial_ETX, serial_ESC, /* self-explanatory?               */
+    SERPAR_FC_SET,                      /* set of flow-control characters  */
+    SERPAR_ESC_SET,                     /* set of characters to be escaped */
+    NULL,                               /* serial_flow_control */
+    NULL,                               /* what to do with FC chars */
+    angel_DD_RxEng_BufferAlloc, NULL    /* how to get a buffer */
+};
+
+static struct re_state rxstate;
+
+/*
+ * structure used for manipulating transmit data
+ */
+typedef struct TxState
+{
+    struct te_state state;
+    unsigned int    index;
+    unsigned char   writebuf[MAXWRITESIZE];
+} TxState;
+
+/*
+ * The set of parameter options supported by the device
+ */
+static unsigned int baud_options[] =
+{
+#ifdef __hpux
+    115200, 57600,
+#endif
+    38400, 19200, 9600
+};
+
+static ParameterList param_list[] =
+{
+    {
+        AP_BAUD_RATE,
+        sizeof(baud_options) / sizeof(unsigned int),
+        baud_options
+    }
+};
+
+static const ParameterOptions serpar_options =
+{
+    sizeof(param_list) / sizeof(ParameterList),
+    param_list
+};
+
+/*
+ * The default parameter config for the device
+ */
+static Parameter param_default[] =
+{
+    { AP_BAUD_RATE, 9600 }
+};
+
+static const ParameterConfig serpar_defaults =
+{
+    sizeof(param_default)/sizeof(Parameter),
+    param_default
+};
+
+/*
+ * The user-modified options for the device
+ */
+static unsigned int user_baud_options[sizeof(baud_options) /
+                                     sizeof(unsigned int)];
+
+static ParameterList param_user_list[] =
+{
+    {
+        AP_BAUD_RATE,
+        sizeof(user_baud_options) / sizeof(unsigned),
+        user_baud_options
+    }
+};
+
+static ParameterOptions user_options =
+{
+    sizeof(param_user_list) / sizeof(ParameterList),
+    param_user_list
+};
+
+static bool user_options_set;
+
+/* forward declarations */
+static int serpar_reset(void);
+static int serpar_set_params(const ParameterConfig *config);
+static int SerparMatch(const char *name, const char *arg);
+
+static void process_baud_rate(unsigned int target_baud_rate)
+{
+    const ParameterList *full_list;
+    ParameterList       *user_list;
+
+    /* create subset of full options */
+    full_list = Angel_FindParamList(&serpar_options, AP_BAUD_RATE);
+    user_list = Angel_FindParamList(&user_options,   AP_BAUD_RATE);
+
+    if (full_list != NULL && user_list != NULL)
+    {
+        unsigned int i, j;
+        unsigned int def_baud = 0;
+
+        /* find lower or equal to */
+        for (i = 0; i < full_list->num_options; ++i)
+           if (target_baud_rate >= full_list->option[i])
+           {
+               /* copy remaining */
+               for (j = 0; j < (full_list->num_options - i); ++j)
+                  user_list->option[j] = full_list->option[i+j];
+               user_list->num_options = j;
+
+               /* check this is not the default */
+               Angel_FindParam(AP_BAUD_RATE, &serpar_defaults, &def_baud);
+               if ((j == 1) && (user_list->option[0] == def_baud))
+               {
+#ifdef DEBUG
+                   printf("user selected default\n");
+#endif
+               }
+               else
+               {
+                   user_options_set = TRUE;
+#ifdef DEBUG
+                   printf("user options are: ");
+                   for (j = 0; j < user_list->num_options; ++j)
+                      printf("%u ", user_list->option[j]);
+                   printf("\n");
+#endif
+               }
+
+               break;   /* out of i loop */
+           }
+
+#ifdef DEBUG
+        if (i >= full_list->num_options)
+           printf("couldn't match baud rate %u\n", target_baud_rate);
+#endif
+    }
+#ifdef DEBUG
+    else
+       printf("failed to find lists\n");
+#endif
+}
+
+static int SerparOpen(const char *name, const char *arg)
+{
+    char *sername = NULL;
+    char *parname = NULL;
+
+#ifdef DEBUG
+    printf("SerparOpen: name %s arg %s\n", name, arg ? arg : "<NULL>");
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    if (IsOpenSerial() || IsOpenParallel()) return -1;
+#else
+    if (Unix_IsSerialInUse() || Unix_IsParallelInUse()) return -1;
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    if (SerparMatch(name, arg) == -1)
+        return -1;
+#else
+    Unix_IsValidParallelDevice(name,&sername,&parname);
+# ifdef DEBUG
+    printf("translated %s to serial %s and parallel %s\n",
+           name==0 ? "NULL" : name,
+           sername==0 ? "NULL" : sername,
+           parname==0 ? "NULL" : parname);
+# endif
+    if (sername==NULL || parname==NULL) return -1;
+#endif
+
+    user_options_set = FALSE;
+
+    /* interpret and store the arguments */
+    if (arg != NULL)
+    {
+        unsigned int target_baud_rate;
+
+        target_baud_rate = (unsigned int)strtoul(arg, NULL, 10);
+
+        if (target_baud_rate > 0)
+        {
+#ifdef DEBUG
+            printf("user selected baud rate %u\n", target_baud_rate);
+#endif
+            process_baud_rate(target_baud_rate);
+        }
+#ifdef DEBUG
+        else
+            printf("could not understand baud rate %s\n", arg);
+#endif
+    }
+
+#ifdef COMPILING_ON_WINDOWS
+    {
+        /*
+         * The serial port number is in name[0] followed by
+         * the parallel port number in name[1]
+         */
+
+        int sport = name[0] - '0';
+        int pport = name[1] - '0';
+
+        if (OpenParallel(pport) != COM_OK)
+            return -1;
+
+        if (OpenSerial(sport, FALSE) != COM_OK)
+        {
+            CloseParallel();
+            return -1;
+        }
+    }
+#else
+    Unix_OpenParallel(parname);
+    Unix_OpenSerial(sername);
+#endif
+
+    serpar_reset();
+
+#if defined(__unix) || defined(__CYGWIN32__)
+    Unix_ioctlNonBlocking();
+#endif
+
+    Angel_RxEngineInit(&config, &rxstate);
+
+    return 0;
+}
+
+#ifdef COMPILING_ON_WINDOWS
+static int SerparMatch(const char *name, const char *arg)
+{
+    char sername[2];
+    char parname[2];
+
+    UNUSED(arg);
+
+    sername[0] = name[0];
+    parname[0] = name[1];
+    sername[1] = parname[1] = 0;
+
+    if (IsValidDevice(sername) == COM_DEVICENOTVALID ||
+        IsValidDevice(parname) == COM_DEVICENOTVALID)
+        return -1;
+    else
+        return 0;
+}
+#else
+static int SerparMatch(const char *portstring, const char *arg)
+{
+    char *sername=NULL, *parname=NULL;
+    UNUSED(arg);
+
+    Unix_IsValidParallelDevice(portstring,&sername,&parname);
+
+      /* Match failed if either sername or parname are still NULL */
+    if (sername==NULL || parname==NULL) return -1;
+    return 0;
+}
+#endif
+
+static void SerparClose(void)
+{
+#ifdef COMPILING_ON_WINDOWS
+    CloseParallel();
+    CloseSerial();
+#else
+    Unix_CloseParallel();
+    Unix_CloseSerial();
+#endif
+}
+
+static int SerparRead(DriverCall *dc, bool block)
+{
+    static unsigned char readbuf[MAXREADSIZE];
+    static int rbindex = 0;
+
+    int nread;
+    int read_errno;
+    int c = 0;
+    re_status restatus;
+    int ret_code = -1;            /* assume bad packet or error */
+
+    /*
+     * we must not overflow buffer, and must start after
+     * the existing data
+     */
+#ifdef COMPILING_ON_WINDOWS
+    {
+        BOOL dummy = FALSE;
+        nread = BytesInRXBufferSerial();
+
+        if (nread > MAXREADSIZE - rbindex)
+            nread = MAXREADSIZE - rbindex;
+        read_errno = ReadSerial(readbuf+rbindex, nread, &dummy);
+        if (pfnProgressCallback != NULL && read_errno == COM_OK)
+        {
+            progressInfo.nRead += nread;
+            (*pfnProgressCallback)(&progressInfo);
+        }
+    }
+#else
+    nread = Unix_ReadSerial(readbuf+rbindex, MAXREADSIZE-rbindex, block);
+    read_errno = errno;
+#endif
+
+    if ((nread > 0) || (rbindex > 0))
+    {
+#ifdef DO_TRACE
+        printf("[%d@%d] ", nread, rbindex);
+#endif
+
+        if (nread > 0)
+            rbindex = rbindex + nread;
+
+        do
+        {
+            restatus = Angel_RxEngine(readbuf[c], &(dc->dc_packet), &rxstate);
+
+#ifdef DO_TRACE
+            printf("<%02X ",readbuf[c]);
+#endif
+            c++;
+        } while (c < rbindex &&
+                 ((restatus == RS_IN_PKT) || (restatus == RS_WAIT_PKT)));
+
+#ifdef DO_TRACE
+        printf("\n");
+#endif
+
+        switch(restatus)
+        {
+          case RS_GOOD_PKT:
+              ret_code = 1;
+              /* fall through to: */
+
+          case RS_BAD_PKT:
+              /*
+               * We now need to shuffle any left over data down to the
+               * beginning of our private buffer ready to be used
+               *for the next packet
+               */
+#ifdef DO_TRACE
+              printf("SerparRead() processed %d, moving down %d\n",
+                     c, rbindex - c);
+#endif
+
+              if (c != rbindex)
+                  memmove((char *) readbuf, (char *) (readbuf + c), rbindex - c);
+
+              rbindex -= c;
+
+              break;
+
+          case RS_IN_PKT:
+          case RS_WAIT_PKT:
+              rbindex = 0;            /* will have processed all we had */
+              ret_code = 0;
+              break;
+
+          default:
+#ifdef DEBUG
+              printf("Bad re_status in SerparRead()\n");
+#endif
+              break;
+        }
+    }
+    else if (nread == 0)
+        /* nothing to read */
+        ret_code = 0;
+    else if (read_errno == ERRNO_FOR_BLOCKED_IO) /* nread < 0 */
+        ret_code = 0;
+
+#ifdef DEBUG
+    if ((nread < 0) && (read_errno != ERRNO_FOR_BLOCKED_IO))
+        perror("read() error in SerparRead()");
+#endif
+
+    return ret_code;
+}
+
+/*
+ *  Function: send_packet
+ *   Purpose: Send a stream of bytes to Angel through the parallel port
+ *
+ * Algorithm: We need to present the data in a form that all boards can
+ *            swallow.  With the PID board, this is a problem: for reasons
+ *            described in the driver (angel/pid/st16c552.c), data are
+ *            sent a nybble at a time on D0-D2 and D4; D3 is wired to ACK,
+ *            which generates an interrupt when it goes low.  This routine
+ *            fills in an array of nybbles, with ACK clear in all but the
+ *            last one.  If, for whatever reason, the write fails, then
+ *            ACK is forced high (thereby enabling the next write a chance
+ *            to be noticed when the falling edge of ACK generates an
+ *            interrupt (hopefully).
+ *
+ *    Params:
+ *       Input: txstate Contains the packet to be sent
+ *
+ *   Returns: Number of *complete* bytes written
+ */
+
+static int SerparWrite(DriverCall *dc)
+{
+    te_status status;
+    int nwritten = 0;
+    static TxState txstate;
+
+    /*
+     * is this a new packet?
+     */
+    if (dc->dc_context == NULL)
+    {
+        /*
+         * yes - initialise TxEngine
+         */
+        Angel_TxEngineInit(&config, &dc->dc_packet, &txstate.state);
+
+        txstate.index = 0;
+        dc->dc_context = &txstate;
+    }
+
+    /*
+     * fill the buffer using the Tx Engine
+     */
+    do
+    {
+        status = Angel_TxEngine(&dc->dc_packet, &txstate.state,
+                                &txstate.writebuf[txstate.index]);
+        if (status != TS_IDLE) txstate.index++;
+
+    } while (status == TS_IN_PKT && txstate.index < MAXWRITESIZE);
+
+#ifdef DO_TRACE
+    {
+        unsigned int i = 0;
+
+        while (i < txstate.index)
+        {
+            printf(">%02X ", txstate.writebuf[i]);
+
+            if (!(++i % 16))
+                putc('\n', stdout);
+        }
+
+        if (i % 16)
+            putc('\n', stdout);
+    }
+#endif
+
+    /*
+     * the data are ready, all we need now is to send them out
+     * in a form that Angel can swallow.
+     */
+#ifdef COMPILING_ON_WINDOWS
+  if (WriteParallel(txstate.writebuf, txstate.index) == COM_OK)
+  {
+    nwritten = txstate.index;
+    if (pfnProgressCallback != NULL)
+    {
+      progressInfo.nWritten += nwritten;
+      (*pfnProgressCallback)(&progressInfo);
+    }
+  }
+  else
+  {
+      MessageBox(GetFocus(), "Write error\n", "Angel", MB_OK | MB_ICONSTOP);
+      return -1;   /* SJ - This really needs to return a value, which is picked up in */
+                   /*      DevSW_Read as meaning stop debugger but don't kill. */
+  }
+#else
+    nwritten = Unix_WriteParallel(txstate.writebuf, txstate.index);
+#endif
+
+    if (nwritten < 0) nwritten = 0;
+
+#ifdef DO_TRACE
+    printf("SerparWrite: wrote %d out of %d bytes\n",
+           nwritten, txstate.index);
+#endif
+
+    /*
+     * has the whole packet gone?
+     */
+    if (nwritten == (int)txstate.index &&
+        (status == TS_DONE_PKT || status == TS_IDLE))
+        /*
+         * yes it has
+         */
+        return 1;
+    else
+    {
+        /*
+         * if some data are left, shuffle them
+         * to the start of the buffer
+         */
+        if (nwritten != (int)txstate.index && nwritten != 0)
+        {
+            txstate.index -= nwritten;
+            (void)memmove((char *) txstate.writebuf,
+                          (char *) (txstate.writebuf + nwritten),
+                          txstate.index);
+        }
+        else if (nwritten == (int)txstate.index)
+            txstate.index = 0;
+
+        return 0;
+    }
+}
+
+static int serpar_reset(void)
+{
+#ifdef COMPILING_ON_WINDOWS
+    FlushParallel();
+    FlushSerial();
+#else
+    Unix_ResetParallel();
+    Unix_ResetSerial();
+#endif
+
+    return serpar_set_params(&serpar_defaults);
+}
+
+static int find_baud_rate(unsigned int *speed)
+{
+    static struct
+    {
+        unsigned int baud;
+        int termiosValue;
+    } possibleBaudRates[] =
+      {
+#if defined(__hpux)
+          {115200, _B115200}, {57600, _B57600},
+#endif
+#ifdef COMPILING_ON_WINDOWS
+        {38400, CBR_38400}, {19200, CBR_19200}, {9600, CBR_9600}, {0, 0}
+#else
+        {38400, B38400}, {19200, B19200}, {9600, B9600}, {0, 0}
+#endif
+    };
+    unsigned int i;
+
+    /* look for lower or matching -- will always terminate at 0 end marker */
+    for (i = 0; possibleBaudRates[i].baud > *speed; ++i)
+        /* do nothing */
+        ;
+
+    if (possibleBaudRates[i].baud > 0)
+       *speed = possibleBaudRates[i].baud;
+
+    return possibleBaudRates[i].termiosValue;
+}
+
+static int serpar_set_params(const ParameterConfig *config)
+{
+    unsigned int speed;
+    int termios_value;
+
+#ifdef DEBUG
+    printf("serpar_set_params\n");
+#endif
+
+    if (!Angel_FindParam(AP_BAUD_RATE, config, &speed))
+    {
+#ifdef DEBUG
+        printf("speed not found in config\n");
+#endif
+        return DE_OKAY;
+    }
+
+    termios_value = find_baud_rate(&speed);
+    if (termios_value == 0)
+    {
+#ifdef DEBUG
+        printf("speed not valid: %u\n", speed);
+#endif
+        return DE_OKAY;
+    }
+
+#ifdef DEBUG
+    printf("setting speed to %u\n", speed);
+#endif
+
+#ifdef COMPILING_ON_WINDOWS
+    SetBaudRate((WORD)termios_value);
+#else
+    Unix_SetSerialBaudRate(termios_value);
+#endif
+
+    return DE_OKAY;
+}
+
+
+static int serpar_get_user_params(ParameterOptions **p_options)
+{
+#ifdef DEBUG
+    printf("serpar_get_user_params\n");
+#endif
+
+    if (user_options_set)
+    {
+        *p_options = &user_options;
+    }
+    else
+    {
+        *p_options = NULL;
+    }
+
+    return DE_OKAY;
+}
+
+
+static int serial_get_default_params( const ParameterConfig **p_config )
+{
+#ifdef DEBUG
+    printf( "serial_get_default_params\n" );
+#endif
+
+    *p_config = &serpar_defaults;
+    return DE_OKAY;
+}
+
+
+static int SerparIoctl(const int opcode, void *args)
+{
+    int ret_code;
+
+#ifdef DEBUG
+    printf("SerparIoctl: op %d arg %p\n", opcode, args ? args : "<NULL>");
+#endif
+
+    switch (opcode)
+    {
+       case DC_RESET:
+           ret_code = serpar_reset();
+           break;
+
+       case DC_SET_PARAMS:
+           ret_code = serpar_set_params((const ParameterConfig *)args);
+           break;
+
+       case DC_GET_USER_PARAMS:
+           ret_code = serpar_get_user_params((ParameterOptions **)args);
+           break;
+
+       case DC_GET_DEFAULT_PARAMS:
+           ret_code =
+               serial_get_default_params((const ParameterConfig **)args);
+           break;
+
+       default:
+           ret_code = DE_BAD_OP;
+           break;
+    }
+
+  return ret_code;
+}
+
+DeviceDescr angel_SerparDevice =
+{
+    "SERPAR",
+    SerparOpen,
+    SerparMatch,
+    SerparClose,
+    SerparRead,
+    SerparWrite,
+    SerparIoctl
+};
+
+/* EOF serpardr.c */
diff --git a/gdb/rdi-share/sys.h b/gdb/rdi-share/sys.h
new file mode 100644
index 0000000..b68ac78
--- /dev/null
+++ b/gdb/rdi-share/sys.h
@@ -0,0 +1,319 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* sys.h 
+ ***********************************************************************
+ * Angel C Libary support channel protocol definitions
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *
+ *
+ *
+ * MESSAGE FORMAT
+ * --------------
+ * Format of the "data" section of C Lib Support Channel Messages.
+ * You will notice that the format is much the same as the format
+ * of ADP messages - this is so that multi-threaded C Libraries can
+ * be supported.
+ *
+ *  unsigned32 reason     - Main C Library reason code.
+ *  unsigned32 debugID    - Info. describing host debug world;
+ *                          private to host and used in any target
+ *                          initiated messages.
+ *  unsigned32 OSinfo1    \ Target OS information to identify process/thread
+ *  unsigned32 OSinfo2    / world, etc. These two fields are target defined.
+ *  byte       args[n]    - Data for message "reason" code.
+ *
+ * The "debugID" is defined by the host-end of the protocol, and is used
+ * by the host to ensure that messages are routed to the correct handler
+ * program/veneer (eg. imagine several threads having opened stdout and
+ * each writing to a different window in a windowed debugger).
+ *
+ * NOTE: The reason that there is no "size" information, is that the
+ * message IDs themselves encode the format of any arguments.
+ *
+ * For further discussion of the format see adp.h
+ *
+ * N.B. All streams are little endian.
+ *
+ * CLIB REASON CODE
+ * ----------------
+ * The message reason codes contain some information that ties them to
+ * the channel and direction that the message will be used with. This
+ * will ensure that even if the message "#define name" is not
+ * completely descriptive, the message reason code is.
+ *
+ *      b31    = direction. 0=Host-to-Target; 1=Target-to-Host;
+ *      b30-16 = reserved. should be zero
+ *      b15-0  = message reason code.
+ *
+ * Note that typically a request will be initiated by the target side, and
+ * that the host will then respond with either an acknowledgement or some
+ * data.  In either case the same reason code will be used, but the direction
+ * bit will be reveresed.
+ */
+
+#ifndef __sys_h
+#define __sys_h
+
+#ifndef HtoT
+#define HtoT    ((unsigned)0 << 31)     /* Host-to-Target message */
+#define TtoH    ((unsigned)1 << 31)     /* Target-to-Host message */
+#endif
+
+/*
+ * The following are error codes used in the status field returned on
+ * sending a message. 0 represents no error having occurred, non-zero
+ * represents a general error.  More codes should be added as required.
+ */
+ 
+#ifndef ErrCode
+#define NoError  0x0
+#endif
+
+/*************************************************************************/
+/* The following are direct conversions of the DeMon SWI's               */
+/* NB: nbytes is the number of bytes INCLUDING THE NULL character where  */
+/*     applicable.                                                       */
+
+/* This message is used as a  response to a packet whose message
+ * was not understood.  The return parameter, code is the reason
+ * code which was not understood. Although intended for use as a
+ * default case on a received message switch it can also be used
+ * as a  proper message*/
+#define CL_Unrecognised          0x00
+    /* Unrecognised()
+     * return(word code)
+     */
+
+/* Write a character to the terminal.
+ */
+#define CL_WriteC       0x01
+   /* WriteC(byte data)
+    * return(word status)
+    */
+
+/* Write a NULL terminated string of characters to the terminal.  The length
+ * of the string excluding the NULL terminating character is passed in 
+ * 'nbytes'.
+ */
+#define CL_Write0       0x02
+   /* Write0(word nbytes, bytes data)
+    * return(word status)
+    */
+
+/* Read a character from the terminal - probably the keyboard.
+ */
+#define CL_ReadC        0x04
+   /* ReadC(void)
+    * return(word status, byte data)
+    */
+
+/* Perform system call, pass NULL terminated string to host's command
+ * line interpreter(NOT AVAILABLE IN PC/DOS RELEASE).  The data byte
+ * returned holds the return code from the system call.
+ */ 
+#define CL_System       0x05
+   /* CLI(word nbytes, bytes data)
+    * return(word status, word data)
+    */
+
+/* It returns the address of the null terminated command line string used to
+ * invoke the program. status will be set to NoError if the command line
+ * can be returned. Other status values will be treated as error conditions.
+ */
+#define CL_GetCmdLine   0x10
+   /* GetCmdLine(void)
+    * return(word status, word nbytes, bytes argline)
+    */
+
+/* Return the number of centi-seconds since the support code began 
+ * execution.  Only the difference between successive calls can be
+ * meaningful.
+ */
+#define CL_Clock        0x61
+   /* Clock(void)
+    * return(word status, word clks)
+    */
+
+/* Return the number of seconds since the beginning of 1970.
+ */
+#define CL_Time         0x63
+   /* Time(void)
+    * return(word status, word time)
+    */
+
+/* Delete(remove, un-link, wipe, destroy) the file named by the
+ * NULL-terminated string 'name'.
+ */
+#define CL_Remove       0x64
+   /* Remove(word nbytes, bytes name)
+    * return(word status)
+    */
+
+/* Rename the file specified by the NULL-terminated string 'oname'
+ * to 'nname'.
+ */   
+#define CL_Rename       0x65
+   /* Rename(word nbytes, bytes oname, word nbytes, bytes nname)
+    * return(word status)
+    */
+
+/* 'name' specifies a NULL-terminated string containing a file name or a
+ * device name.  Opens the file/device and returns a non-zero handle on
+ * success that can be quoted to CL_Close, CL_Read, CL_Write, CL_Seek,
+ * CL_Flen or CL_IsTTY.  The mode is an integer in the range 0-11:-
+ *
+ * Mode:              0   1   2   3   4   5   6   7   8   9   10   11
+ * ANSI C fopen mode: r   rb  r+  r+b w   wb  w+  w+b a   ab  a+   a+b
+ *
+ * Values 12-15 are illegal.  If 'name' is ":tt" the stdin/stdout is
+ * opened depending on whether 'mode' is read or write.
+ */ 
+#define CL_Open         0x66
+   /* Open(word nbytes, bytes name, word mode)
+    * return(word handle)
+    */
+
+/* 'handle' is a file handle previously returned by CL_Open.  CL_Close
+ * closes the file.
+ */ 
+#define CL_Close        0x68
+   /* Close(word handle)
+    * return(word status)
+    */
+
+/* Writes data of length nbytes to the file/device specified by
+ * handle.  nbtotal represents the total number of bytes to be
+ * written, whereas nbytes is the number of bytes in this packet
+ *
+ * If nbtotal is <= DATASIZE - CL_Write message header size in the
+ * packet then nbytes = nbtotal and the number of bytes not written
+ * is returned.  If nbtotal is > the packet size then the CL_Write
+ * must be followed by a number of CL_WriteX's to complete the write,
+ * the nbytes returned by CL_Write can be ignored
+ * If the status word returned is non zero, an error has occurred and
+ * the write request has been aborted.
+ * 
+ */
+#define CL_Write        0x69
+   /* Write(word handle, word nbtotal, word nbytes, bytes data)
+    * return(word status, word nbytes)
+    */
+
+/* Write Extension is a reads a continuation of data from a CL_Write 
+ * which was too big to fit in a single packet.
+ * nbytes is the number of bytes of data in this packet, the 
+ * returned value of nbytes can be ignored except if it is the 
+ * last packet, in which case it is the number of bytes that were NOT
+ * written 
+ */
+#define CL_WriteX       0x6A
+   /* WriteX(word nbytes, bytes data)
+    * return(word status, word nbytes)
+    */
+
+/* Reads 'nbytes' from the file/device specified by 'handle'.
+ *
+ * If nbytes <= DATASIZE then the read will occur in a single packet
+ * and the returned value of nbytes will be the number of bytes actually
+ * read and nbmore will be 0. If nbytes> DATASIZE then multiple packets
+ * will have to be used ie CL_Read followed by 1 or more CL_ReadX
+ * packets. In this case CL_Read will return nbytes read in the current
+ * packet and nbmore representing how many more bytes are expected to be
+ * read
+ * If the status word is non zero then the request has completed with an
+ * error. If the status word is 0xFFFFFFFF (-1) then an EOF condition
+ * has been reached.
+ */
+#define CL_Read         0x6B
+   /* Read(word handle, word nbytes)
+    * return(word status, word nbytes, word nbmore, bytes data)
+    */
+
+/* Read eXtension returns a continuation of the data that was opened for
+ * read in the earlier CL_Read. The return value nbytes is the number of
+ * data bytes in the packet, nbmore is the number of bytes more that are
+ * expected to be read in subsequent packets.
+ */
+#define CL_ReadX        0x6C
+  /* ReadX()
+   * return(word status, word nbytes, word nbmore, bytes data)
+   */
+
+/* Seeks to byte position 'posn' in the file/device specified by 'handle'.
+ */
+#define CL_Seek         0x6D
+   /* Seek(word handle, word posn)
+    * return(word status)
+    */
+
+/* Returns the current length of the file specified by 'handle' in 'len'.
+ * If an error occurs 'len' is set to -1. 
+ */ 
+#define CL_Flen         0x6E
+   /* Flen(word handle)
+    * return(word len)
+    */
+
+/* Returns NoError if 'handle' specifies an interactive device, otherwise
+ * returns GenError
+ */ 
+#define CL_IsTTY        0x6F
+   /* IsTTY(word handle)
+    * return(word status)
+    */
+
+/* Returns a temporary host file name. The maximum length of a file name
+ * is passed to the host. The TargetID is some identifier from the target
+ * for this particular temporary filename. This value is could be used
+ * directly in the generation of the filename. 
+ *
+ * If the host cannot create a suitable name or the generated name is too
+ * long then status is non zero. status will be NoError if the host can create
+ * a name. 
+ */
+#define CL_TmpNam       0x70
+   /* TmpNam(word maxlength, word TargetID)
+    * return(word status, word nbytes, bytes fname)
+    */
+
+/* Note there is no message for Exit, EnterOS, InstallHandler or
+ * GenerateError as these will be supported entirely at the host end,
+ * or by the underlying Operating system.
+ */
+
+#define CL_UnknownReason (-1)
+
+extern unsigned int GetRaiseHandler( void );
+extern unsigned int SysLibraryHandler(unsigned int sysCode, unsigned int *args);
+extern void angel_SysLibraryInit(void);
+
+/*
+ * Function: Angel_IsSysHandlerRunning
+ *  Purpose: return whether or not SysLibraryHandler is running
+ *
+ *   No paramaters
+ *             
+ *   Returns 1 if SysLibraryHandler is running
+ *           0 otherwise
+ */
+extern int Angel_IsSysHandlerRunning(void);
+
+#ifdef ICEMAN2
+/* This function exists in an ICEman2 system only, and can be called by
+ * debug support code when the debugger tells it how much memory the
+ * target has.  This will then be used to deal with the HEAPINFO SWI
+ */
+extern void angel_SetTopMem(unsigned addr);
+#endif
+
+#endif
+
diff --git a/gdb/rdi-share/tx.c b/gdb/rdi-share/tx.c
new file mode 100644
index 0000000..a52286c
--- /dev/null
+++ b/gdb/rdi-share/tx.c
@@ -0,0 +1,176 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/*-*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ *   Project: ANGEL
+ *
+ *     Title: Character based packet transmission engine
+ */
+
+#include <stdarg.h>    /* ANSI varargs support */
+#include "angel.h"     /* Angel system definitions */
+#include "endian.h"    /* Endian independant memory access macros */
+#include "crc.h"       /* crc generation definitions and headers */
+#include "rxtx.h"
+#include "channels.h"
+#include "buffers.h"
+#include "logging.h"
+
+/* definitions to describe the engines state */
+#define N_STX           0x0  /* first 2 bits for N_ */
+#define N_BODY          0x1
+#define N_ETX           0x2
+#define N_IDLE          0x3
+#define N_MASK          0x3 /* mask for the Encapsulator state */
+
+#define E_PLAIN         (0x0 << 2) /* 3rd bit for E_ */
+#define E_ESC           (0x1 << 2) /* 3rd bit for E_ */
+#define E_MASK          (0x1 << 2) /* mask for the Escaper state */
+
+#define F_HEAD          (0x0 << 3) /* 4th and 5th bits for F_ */
+#define F_DATA          (0x1 << 3) 
+#define F_CRC           (0x1 << 4)
+#define F_MASK          (0x3 << 3) /* mask for the Escaper state */
+
+static unsigned char escape(unsigned char ch_in, struct te_state *txstate);
+
+void Angel_TxEngineInit(const struct re_config *txconfig,
+                        const struct data_packet *packet, 
+                        struct te_state *txstate){
+  IGNORE(packet);
+  txstate->tx_state = N_STX | E_PLAIN | F_HEAD;
+  txstate->field_c = 0;
+  txstate->encoded = 0;
+  txstate->config = txconfig;
+  txstate->crc = 0;
+}
+
+te_status Angel_TxEngine(const struct data_packet *packet,
+                         struct te_state *txstate,
+                         unsigned char *tx_ch){
+  /* TODO: gaurd on long/bad packets */
+  /*
+   * encapsulate the packet, framing has been moved from a seperate
+   * function into the encapsulation routine as it needed too much
+   * inherited state for it to be sensibly located elsewhere
+   */
+  switch ((txstate->tx_state) & N_MASK){
+  case N_STX:
+#ifdef DO_TRACE
+    __rt_trace("txe-stx ");
+#endif
+    txstate->tx_state = (txstate->tx_state & ~N_MASK) | N_BODY;
+    *tx_ch = txstate->config->stx;
+    txstate->field_c = 3; /* set up for the header */
+    txstate->crc = startCRC32; /* set up basic crc */
+    return TS_IN_PKT;
+  case N_BODY:{
+    switch (txstate->tx_state & F_MASK) {
+    case F_HEAD:
+#ifdef DO_TRACE
+    __rt_trace("txe-head ");
+#endif
+      if (txstate->field_c == 3) {
+        /* send type */
+        *tx_ch = escape(packet->type, txstate);
+        return TS_IN_PKT;
+      }
+      else {
+        *tx_ch = escape((packet->len >> (txstate->field_c - 1) * 8) & 0xff,
+                      txstate);
+          if (txstate->field_c == 0) {
+            /* move on to the next state */
+            txstate->tx_state = (txstate->tx_state & ~F_MASK) | F_DATA;
+            txstate->field_c = packet->len;
+          }
+        return TS_IN_PKT;
+      }
+    case F_DATA:
+#ifdef DO_TRACE
+    __rt_trace("txe-data ");
+#endif
+      *tx_ch = escape(packet->data[packet->len - txstate->field_c], txstate);
+      if (txstate->field_c == 0) {
+        /* move on to the next state */
+        txstate->tx_state = (txstate->tx_state & ~F_MASK) | F_CRC;
+        txstate->field_c = 4;
+      }      
+      return TS_IN_PKT;
+    case F_CRC:
+#ifdef DO_TRACE
+    __rt_trace("txe-crc ");
+#endif
+     *tx_ch = escape((txstate->crc >> ((txstate->field_c - 1) * 8)) & 0xff,
+                      txstate);
+
+      if (txstate->field_c == 0) {
+#ifdef DO_TRACE
+        __rt_trace("txe crc = 0x%x\n", txstate->crc);
+#endif
+        /* move on to the next state */
+        txstate->tx_state = (txstate->tx_state & ~N_MASK) | N_ETX;
+      }
+      return TS_IN_PKT;     
+    }
+  }
+  case N_ETX:
+#ifdef DO_TRACE
+    __rt_trace("txe-etx\n");
+#endif
+    txstate->tx_state = (txstate->tx_state & ~N_MASK) | N_IDLE;
+    *tx_ch = txstate->config->etx;
+    return TS_DONE_PKT;
+  default:
+#ifdef DEBUG
+    __rt_info("tx default\n");
+#endif
+    txstate->tx_state = (txstate->tx_state & ~N_MASK) | N_IDLE;
+    return TS_IDLE;
+  }
+  /* stop a silly -Wall warning */
+  return (te_status)-1;
+}
+
+/*
+ * crc generation occurs in the escape function because it is the only
+ * place where we know that we're putting a real char into the buffer
+ * rather than an escaped one.
+ * We must be careful here not to update the crc when we're sending it
+ */
+static unsigned char escape(unsigned char ch_in, struct te_state *txstate) {
+   if (((txstate->tx_state) & E_MASK) == E_ESC) {
+      /* char has been escaped so send the real char */
+#ifdef DO_TRACE
+     __rt_trace("txe-echar ");
+#endif
+      txstate->tx_state = (txstate->tx_state & ~E_MASK) | E_PLAIN;
+      txstate->field_c--;
+      if ((txstate->tx_state & F_MASK) != F_CRC)
+        txstate->crc = crc32( &ch_in, 1, txstate->crc);
+      return ch_in | serial_ESCAPE;
+   }
+   if ((ch_in < 32) && ((txstate->config->esc_set & (1 << ch_in)) != 0)) {
+     /* char needs escaping */
+#ifdef DO_TRACE
+     __rt_trace("txe-esc ");
+#endif
+     txstate->tx_state = (txstate->tx_state & ~E_MASK) | E_ESC;
+     return txstate->config->esc;
+   }
+   /* must be a char that can be sent plain */
+   txstate->field_c--;
+   if ((txstate->tx_state & F_MASK) != F_CRC)
+     txstate->crc = crc32(&ch_in, 1, txstate->crc);
+   return ch_in;
+}
+
+/* EOF tx.c */
diff --git a/gdb/rdi-share/unixcomm.c b/gdb/rdi-share/unixcomm.c
new file mode 100644
index 0000000..7c2183d
--- /dev/null
+++ b/gdb/rdi-share/unixcomm.c
@@ -0,0 +1,552 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+
+#ifdef __hpux
+#  define _POSIX_SOURCE 1
+#endif
+
+#include <stdio.h>
+#include <unistd.h>
+#include <ctype.h>
+
+#ifdef __hpux
+#  define _TERMIOS_INCLUDED
+#  include <sys/termio.h>
+#  undef _TERMIOS_INCLUDED
+#else
+#  include <termios.h>
+#endif
+
+#include <string.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/time.h>
+
+#ifdef sun
+# include <sys/ioccom.h>
+# ifdef __svr4__
+#  include <sys/bpp_io.h>
+# else
+#  include <sbusdev/bpp_io.h>
+# endif
+#endif
+
+#ifdef BSD
+# ifdef sun
+#  include <sys/ttydev.h>
+# endif
+# ifdef __alpha 
+#  include <sys/ioctl.h>
+# else
+#  include <sys/filio.h>
+# endif
+#endif
+
+#ifdef __hpux
+#  define _INCLUDE_HPUX_SOURCE
+#  include <sys/ioctl.h>
+#  undef _INCLUDE_HPUX_SOURCE
+#endif
+
+#include "host.h"
+#include "unixcomm.h"
+
+#define PP_TIMEOUT      1              /* seconds */
+
+#ifdef sun
+#define SERPORT1   "/dev/ttya"
+#define SERPORT2   "/dev/ttyb"
+#define PARPORT1   "/dev/bpp0"
+#define PARPORT2   "/dev/bpp1"
+#endif
+
+#ifdef __hpux
+#define SERPORT1   "/dev/tty00"
+#define SERPORT2   "/dev/tty01"
+#define PARPORT1   "/dev/ptr_parallel"
+#define PARPORT2   "/dev/ptr_parallel"
+#endif
+
+#ifdef __linux__
+#define SERPORT1   "/dev/cua0"
+#define SERPORT2   "/dev/cua1"
+#define PARPORT1   "/dev/par0"
+#define PARPORT2   "/dev/par1"
+#endif
+
+#if defined (__FreeBSD__) || defined (__NetBSD__) || defined (__OpenBSD__) || defined (bsdi)
+#define SERPORT1   "/dev/cuaa0"
+#define SERPORT2   "/dev/cuaa1"
+#define PARPORT1   "/dev/lpt0"
+#define PARPORT2   "/dev/lpt1"
+#endif
+
+
+#define SERIAL_PREFIX "/dev/tty"
+#if defined(_WIN32) || defined (__CYGWIN32__) 
+#define SERPORT1   "com1"
+#define SERPORT2   "com2"
+#define PARPORT1   "lpt1"
+#define PARPORT2   "lpt2"
+#undef SERIAL_PREFIX
+#define SERIAL_PREFIX "com"
+#endif
+
+
+
+/*
+ * Parallel port output pins, used for signalling to target
+ */
+
+#ifdef sun
+struct bpp_pins bp;
+#endif
+
+static int serpfd = -1;
+static int parpfd = -1;
+
+extern const char *Unix_MatchValidSerialDevice(const char *name)
+{
+  int i=0;
+  char *sername=NULL;
+
+  /* Accept no name as the default serial port */
+  if (name == NULL) {
+    return SERPORT1;
+  }
+
+  /* Look for the simple cases - 1,2,s,S,/dev/... first, and
+   * afterwards look for S=... clauses, which need parsing properly.
+   */
+
+  /* Accept /dev/tty* where * is limited */
+  if (strlen(name) == strlen(SERPORT1)
+      && strncmp(name, SERIAL_PREFIX, strlen (SERIAL_PREFIX)) == 0)
+      {
+        return name;
+      }
+
+  /* Accept "1" or "2" or "S" - S is equivalent to "1" */
+  if (strcmp(name, "1") == 0 ||
+      strcmp(name, "S") == 0 || strcmp(name, "s") == 0) {
+    return SERPORT1;
+  }
+  if (strcmp(name, "2") == 0) return SERPORT2;
+
+  /* It wasn't one of the simple cases, so now we have to parse it
+   * properly
+   */
+
+  do {
+    switch (name[i]) {
+      case ',':
+        /* Skip over commas */
+        i++;
+        break;
+      
+      default:
+        return 0;
+        /* Unexpected character => error - not matched */
+
+      case 0:
+        /* End of string means return whatever we have matched */
+        return sername;
+
+      case 's':
+      case 'S':
+      case 'h':
+      case 'H': {
+        char ch = tolower(name[i]);
+        int j, continue_from, len;
+        
+        /* If the next character is a comma or a NULL then this is
+         * a request for the default Serial port
+         */
+        if (name[++i] == 0 || name[i] == ',') {
+          if (ch=='s') 
+              sername=SERPORT1;
+          break;
+        }
+
+        /* Next character must be an = */
+        if (name[i] != '=') return 0;
+        /* Search for the end of the port spec. (ends in NULL or ,) */
+        for (j= ++i; name[j] != 0 && name[j] != ','; j++)
+          ; /* Do nothing */
+        /* Notice whether this is the last thing to parse or not
+         * and also calaculate the length of the string
+         */
+        if (name[j] == '0') continue_from = -1;
+        else continue_from = j;
+        len=(j-i);
+
+        /* And now try to match the serial / parallel port */
+        switch (ch) {
+          case 's': {
+            /* Match serial port */
+            if (len==1) {
+              if (name[i]=='1') 
+                  sername=SERPORT1;
+              else if (name[i]=='2') 
+                  sername=SERPORT2;
+            } else if (len==strlen(SERPORT1)) {
+              if (strncmp(name+i,SERPORT1,strlen(SERPORT1)) == 0)
+                sername=SERPORT1;
+              else if (strncmp(name+i,SERPORT2,strlen(SERPORT2)) == 0)
+                sername=SERPORT2;
+            }
+
+            break;
+          }
+
+          case 'h': 
+            /* We don't actually deal with the H case here, we just
+             * match it and allow it through.
+             */
+            break;
+        }
+
+        if (continue_from == -1) return sername;
+        i = continue_from;
+        break;
+      }
+    }
+  } while (1);
+
+  return 0;
+}
+
+
+extern int Unix_IsSerialInUse(void)
+{
+    if (serpfd >= 0)
+        return -1;
+
+    return 0;
+}
+
+extern int Unix_OpenSerial(const char *name)
+{
+#if defined(BSD) || defined(__CYGWIN32__)
+    serpfd = open(name, O_RDWR);
+#else
+    serpfd = open(name, O_RDWR | O_NONBLOCK);
+#endif
+
+    if (serpfd < 0) {
+        perror("open");
+        return -1;
+    }
+
+    return 0;
+}
+
+extern void Unix_CloseSerial(void)
+{
+    if (serpfd >= 0)
+    {
+        (void)close(serpfd);
+        serpfd = -1;
+    }
+}
+
+extern int Unix_ReadSerial(unsigned char *buf, int n, bool block)
+{
+    fd_set fdset;
+    struct timeval tv;
+    int err;
+
+    FD_ZERO(&fdset);
+    FD_SET(serpfd, &fdset);
+
+    tv.tv_sec = 0;
+    tv.tv_usec = (block ? 10000 : 0);
+
+    err = select(serpfd + 1, &fdset, NULL, NULL, &tv);
+
+    if (err < 0 && errno != EINTR)
+    {
+#ifdef DEBUG
+        perror("select");
+#endif
+        panic("select failure");
+        return -1;
+    }
+    else if (err > 0 && FD_ISSET(serpfd, &fdset))
+        return read(serpfd, buf, n);
+    else /* err == 0 || FD_CLR(serpfd, &fdset) */
+    {
+        errno = ERRNO_FOR_BLOCKED_IO;
+        return -1;
+    }
+}
+
+extern int Unix_WriteSerial(unsigned char *buf, int n)
+{
+    return write(serpfd, buf, n);
+}
+
+extern void Unix_ResetSerial(void)
+{
+    struct termios terminfo;
+
+    tcgetattr(serpfd, &terminfo);
+#ifdef __CYGWIN32__
+    /* Expedient, but it works.  */
+    terminfo.c_iflag = 0;
+    terminfo.c_oflag = 0;
+    terminfo.c_cflag = 48;
+    terminfo.c_lflag = 0;
+    terminfo.c_cc[VMIN] = 0;
+    terminfo.c_cc[VTIME] = 1;
+#else
+    terminfo.c_lflag &= ~(ICANON | ISIG | ECHO | IEXTEN);
+    terminfo.c_iflag &= ~(IGNCR | INPCK | ISTRIP | ICRNL | BRKINT);
+    terminfo.c_iflag |= (IXON | IXOFF | IGNBRK);
+    terminfo.c_cflag = (terminfo.c_cflag & ~CSIZE) | CS8 | CREAD;
+    terminfo.c_cflag &= ~PARENB;
+    terminfo.c_cc[VMIN] = 1;
+    terminfo.c_cc[VTIME] = 0;
+    terminfo.c_oflag &= ~OPOST;
+#endif
+    tcsetattr(serpfd, TCSAFLUSH, &terminfo);
+}
+
+extern void Unix_SetSerialBaudRate(int baudrate)
+{
+    struct termios terminfo;
+
+    tcgetattr(serpfd, &terminfo);
+    cfsetospeed(&terminfo, baudrate);
+    cfsetispeed(&terminfo, baudrate);
+    tcsetattr(serpfd, TCSAFLUSH, &terminfo);
+}
+
+extern void Unix_ioctlNonBlocking(void)
+{
+#if defined(BSD)
+    int nonblockingIO = 1;
+    (void)ioctl(serpfd, FIONBIO, &nonblockingIO);
+
+    if (parpfd != -1)
+        (void)ioctl(parpfd, FIONBIO, &nonblockingIO);
+#endif
+}
+
+extern void Unix_IsValidParallelDevice(
+  const char *portstring, char **sername, char **parname)
+{
+  int i=0;
+  *sername=NULL;
+  *parname=NULL;
+
+  /* Do not recognise a NULL portstring */
+  if (portstring==NULL) return;
+
+  do {
+    switch (portstring[i]) {
+      case ',':
+        /* Skip over commas */
+        i++;
+        break;
+      
+      default:
+      case 0:
+        /* End of string or bad characcter means we have finished */
+        return;
+
+      case 's':
+      case 'S':
+      case 'p':
+      case 'P':
+      case 'h':
+      case 'H': {
+        char ch = tolower(portstring[i]);
+        int j, continue_from, len;
+        
+        /* If the next character is a comma or a NULL then this is
+         * a request for the default Serial or Parallel port
+         */
+        if (portstring[++i] == 0 || portstring[i] == ',') {
+          if (ch=='s') *sername=SERPORT1;
+          else if (ch=='p') *parname=PARPORT1;
+          break;
+        }
+
+        /* Next character must be an = */
+        if (portstring[i] != '=') return;
+        /* Search for the end of the port spec. (ends in NULL or ,) */
+        for (j= ++i; portstring[j] != 0 && portstring[j] != ','; j++)
+          ; /* Do nothing */
+        /* Notice whether this is the last thing to parse or not
+         * and also calaculate the length of the string
+         */
+        if (portstring[j] == '0') continue_from = -1;
+        else continue_from = j;
+        len=(j-i);
+
+        /* And now try to match the serial / parallel port */
+        switch (ch) {
+          case 's': {
+            /* Match serial port */
+            if (len==1) {
+              if (portstring[i]=='1') *sername=SERPORT1;
+              else if (portstring[i]=='2') *sername=SERPORT2;
+            } else if (len==strlen(SERPORT1)) {
+              if (strncmp(portstring+i,SERPORT1,strlen(SERPORT1)) == 0)
+                *sername=SERPORT1;
+              else if (strncmp(portstring+i,SERPORT2,strlen(SERPORT2)) == 0)
+                *sername=SERPORT2;
+            }
+            break;
+          }
+
+          case 'p': {
+            /* Match parallel port */
+            if (len==1) {
+              if (portstring[i]=='1') *parname=PARPORT1;
+              else if (portstring[i]=='2') *parname=PARPORT2;
+            } else if (len==strlen(PARPORT1)) {
+              if (strncmp(portstring+i,PARPORT1,strlen(PARPORT1)) == 0)
+                *parname=PARPORT1;
+              else if (strncmp(portstring+i,PARPORT2,strlen(PARPORT2)) == 0)
+                *parname=PARPORT2;
+            }
+            break;
+          }
+
+          case 'h': 
+            /* We don't actually deal with the H case here, we just
+             * match it and allow it through.
+             */
+            break;
+        }
+
+        if (continue_from == -1) return;
+        i = continue_from;
+        break;
+      }
+    }
+  } while (1);
+  return;  /* Will never get here */
+}
+
+extern int Unix_IsParallelInUse(void)
+{
+    if (parpfd >= 0)
+        return -1;
+
+    return 0;
+}
+
+extern int Unix_OpenParallel(const char *name)
+{
+#if defined(BSD)
+    parpfd = open(name, O_RDWR);
+#else
+    parpfd = open(name, O_RDWR | O_NONBLOCK);
+#endif
+
+    if (parpfd < 0)
+    {
+        char errbuf[256];
+
+        sprintf(errbuf, "open %s", name);
+        perror(errbuf);
+
+        return -1;
+    }
+
+    return 0;
+}
+
+extern void Unix_CloseParallel(void)
+{
+    if (parpfd >= 0)
+    {
+        (void)close(parpfd);
+        parpfd = -1;
+    }
+}
+
+
+extern unsigned int Unix_WriteParallel(unsigned char *buf, int n)
+{
+    int ngone;
+
+    if ((ngone = write(parpfd, buf, n)) < 0)
+    {
+        /*
+         * we ignore errors (except for debug purposes)
+         */
+#ifdef DEBUG
+        char errbuf[256];
+
+        sprintf(errbuf, "send_packet: write");
+        perror(errbuf);
+#endif
+        ngone = 0;
+    }
+
+    /* finished */
+    return (unsigned int)ngone;
+}
+
+
+#ifdef sun
+extern void Unix_ResetParallel(void)
+{
+    struct bpp_transfer_parms tp;
+
+#ifdef DEBUG
+    printf("serpar_reset\n");
+#endif
+
+    /*
+     * we need to set the parallel port up for BUSY handshaking,
+     * and select the timeout
+     */
+    if (ioctl(parpfd, BPPIOC_GETPARMS, &tp) < 0)
+    {
+#ifdef DEBUG
+        perror("ioctl(BPPIOCGETPARMS)");
+#endif
+        panic("serpar_reset: cannot get BPP parameters");
+    }
+
+    tp.write_handshake = BPP_BUSY_HS;
+    tp.write_timeout = PP_TIMEOUT;
+
+    if (ioctl(parpfd, BPPIOC_SETPARMS, &tp) < 0)
+    {
+#ifdef DEBUG
+        perror("ioctl(BPPIOC_SETPARMS)");
+#endif
+        panic("serpar_reset: cannot set BPP parameters");
+    }
+}
+
+#else
+
+/* Parallel not supported on HP */
+
+extern void Unix_ResetParallel(void)
+{
+}
+
+#endif
+
diff --git a/gdb/rdi-share/unixcomm.h b/gdb/rdi-share/unixcomm.h
new file mode 100644
index 0000000..baa6552
--- /dev/null
+++ b/gdb/rdi-share/unixcomm.h
@@ -0,0 +1,212 @@
+/* 
+ * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
+ * 
+ * This software may be freely used, copied, modified, and distributed
+ * provided that the above copyright notice is preserved in all copies of the
+ * software.
+ */
+
+/* -*-C-*-
+ *
+ * $Revision$
+ *     $Date$
+ *
+ */
+#ifndef angsd_unixcomm_h
+#define angsd_unixcomm_h
+
+#include <errno.h>
+
+#if defined(BSD)
+#  define ERRNO_FOR_BLOCKED_IO EWOULDBLOCK
+#else
+#  define ERRNO_FOR_BLOCKED_IO EAGAIN
+#endif
+
+/*
+ *  Function: Unix_MatchValidSerialDevice
+ *   Purpose: check that the serial driver/port name is valid
+ *            and return the actual device name if it is.
+ *
+ *    Params:
+ *       Input: name    Name of device going to be used
+ *
+ *   Returns: 
+ *          OK: Pointer to name of the device matched
+ *       Error or unrecognised deivce: 0
+ */
+extern const char *Unix_MatchValidSerialDevice(const char *name);
+
+/*
+ *  Function: Unix_IsSerialInUse
+ *   Purpose: check whether the serial port is in use
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: 
+ *          OK: 0       Serial device not in use
+ *       Error: -1      Serial device in use
+ */
+extern int Unix_IsSerialInUse(void);
+
+/*
+ *  Function: Unix_OpenSerial
+ *   Purpose: open the serial port
+ *
+ *    Params:
+ *       Input: name    Name of device to open
+ *
+ *   Returns: Unix 'open' returns
+ */
+extern int Unix_OpenSerial(const char *name);
+
+/*
+ *  Function: Unix_CloseSerial
+ *   Purpose: close the serial port
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_CloseSerial(void);
+
+/*
+ *  Function: Unix_ReadSerial
+ *   Purpose: reads a specified number of bytes (or less) from the serial port
+ *
+ *    Params:
+ *       Input: buf     Buffer to store read bytes
+ *              n       Maximum number of bytes to read
+ *
+ *   Returns: Unix 'read' returns
+ */
+extern int Unix_ReadSerial(unsigned char *buf, int n, bool block);
+
+/*
+ *  Function: Unix_WriteSerial
+ *   Purpose: writes a specified number of bytes (or less) to the serial port
+ *
+ *    Params:
+ *       Input: buf     Buffer to write bytes from
+ *              n       Maximum number of bytes to write
+ *
+ *   Returns: Unix 'write' returns
+ */
+extern int Unix_WriteSerial(unsigned char *buf, int n);
+
+/*
+ *  Function: Unix_ResetSerial
+ *   Purpose: resets the serial port for another operation
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_ResetSerial(void);
+
+/*
+ *  Function: Unix_SetSerialBaudRate
+ *   Purpose: check that the serial driver/port name is valid
+ *
+ *    Params:
+ *       Input: baudrate    termios value for baud rate
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_SetSerialBaudRate(int baudrate);
+
+/*
+ *  Function: Unix_ioctlNonBlocking
+ *   Purpose: sets the serial port to non-blocking IO
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_ioctlNonBlocking(void);
+
+/*
+ *  Function: Unix_IsValidParallelDevice
+ *   Purpose: check whether the combined serial and parallel device specification
+ *            is ok, and return the ports selected
+ *
+ *    Params:
+ *       Input: portstring - is a string which specifies which serial
+ *                           and parallel ports are to be used. Can
+ *                           include s=<val> and p=<val> separated by a
+ *                           comma.
+ *
+ *   Returns: 
+ *       Output: *sername  - returns the device name of the chosen serial port
+ *               *parname  - returns the device name of the chosen parallel port
+ *               If either of these is NULL on return then the match failed.
+ */
+extern void Unix_IsValidParallelDevice(
+  const char *portstring, char **sername, char **parname
+);
+
+/*
+ *  Function: Unix_IsParallelInUse
+ *   Purpose: check whether the parallel port is in use
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: 
+ *          OK: 0       Parallel device not in use
+ *       Error: -1      Parallel device in use
+ */
+extern int Unix_IsParallelInUse(void);
+
+/*
+ *  Function: Unix_OpenParallel
+ *   Purpose: open the parallel port
+ *
+ *    Params:
+ *       Input: name    Name of device to open
+ *
+ *   Returns: Unix 'open' returns
+ */
+extern int Unix_OpenParallel(const char *name);
+
+/*
+ *  Function: Unix_CloseParallel
+ *   Purpose: close the parallel port
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_CloseParallel(void);
+
+/*
+ *  Function: Unix_WriteParallel
+ *   Purpose: writes a specified number of bytes (or less) to the parallel port
+ *
+ *    Params:
+ *       Input: buf     Buffer to write bytes from
+ *              n       Maximum number of bytes to write
+ *
+ *   Returns: Unix 'write' returns
+ */
+extern unsigned int Unix_WriteParallel(unsigned char *buf, int n);
+
+/*
+ *  Function: Unix_ResetParallel
+ *   Purpose: resets the parallel port for another operation
+ *
+ *    Params:
+ *       Input: Nothing
+ *
+ *   Returns: Nothing
+ */
+extern void Unix_ResetParallel(void);
+
+#endif /* ndef angsd_unixcomm_h */
+
+/* EOF unixcomm.h */
diff --git a/gdb/remote-adapt.c b/gdb/remote-adapt.c
new file mode 100644
index 0000000..b22f180
--- /dev/null
+++ b/gdb/remote-adapt.c
@@ -0,0 +1,1443 @@
+/* Remote debugging interface for AMD 290*0 Adapt Monitor Version 2.1d18. 
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by David Wood at New York University (wood@lab.ultra.nyu.edu).
+   Adapted from work done at Cygnus Support in remote-eb.c.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is like remote.c but is for an esoteric situation--
+   having a 29k board attached to an Adapt inline monitor. 
+   The  monitor is connected via serial line to a unix machine 
+   running gdb. 
+
+   3/91 -  developed on Sun3 OS 4.1, by David Wood
+   	o - I can't get binary coff to load. 
+	o - I can't get 19200 baud rate to work. 
+   7/91 o - Freeze mode tracing can be done on a 29050.  */
+
+
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <errno.h>
+#include "terminal.h"
+#include "target.h"
+#include "gdbcore.h"
+
+/* This processor is getting rusty but I am trying to keep it
+   up to date at least with data structure changes.
+   Activate this block to compile just this file.
+   */
+#define COMPILE_CHECK 0
+#if COMPILE_CHECK
+#define Q_REGNUM 0
+#define VAB_REGNUM 0
+#define CPS_REGNUM 0
+#define IPA_REGNUM 0
+#define IPB_REGNUM 0
+#define GR1_REGNUM 0
+#define LR0_REGNUM 0
+#define IPC_REGNUM 0
+#define CR_REGNUM 0
+#define BP_REGNUM 0
+#define FC_REGNUM 0
+#define INTE_REGNUM 0
+#define EXO_REGNUM 0
+#define GR96_REGNUM 0
+#define NPC_REGNUM
+#define FPE_REGNUM 0
+#define PC2_REGNUM 0
+#define FPS_REGNUM 0
+#define ALU_REGNUM 0
+#define LRU_REGNUM 0
+#define TERMINAL int
+#define RAW 1
+#define ANYP 1
+extern int a29k_freeze_mode ;
+extern int processor_type ;
+extern char * processor_name ;
+#endif
+
+/* External data declarations */
+extern int stop_soon_quietly;           /* for wait_for_inferior */
+
+/* Forward data declarations */
+extern struct target_ops adapt_ops;		/* Forward declaration */
+
+/* Forward function declarations */
+static void adapt_fetch_registers ();
+static void adapt_store_registers ();
+static void adapt_close ();
+static int  adapt_clear_breakpoints();
+
+#define FREEZE_MODE 	(read_register(CPS_REGNUM) && 0x400) 
+#define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE)
+
+/* Can't seem to get binary coff working */
+#define ASCII_COFF		/* Adapt will be downloaded with ascii coff */
+
+/* FIXME: Replace with `set remotedebug'.  */
+#define LOG_FILE "adapt.log"
+#if defined (LOG_FILE)
+FILE *log_file=NULL;
+#endif
+
+static int timeout = 5;
+static char *dev_name;
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   adapt_open knows that we don't have a file open when the program
+   starts.  */
+int adapt_desc = -1;
+
+/* stream which is fdopen'd from adapt_desc.  Only valid when
+   adapt_desc != -1.  */
+FILE *adapt_stream;
+
+#define ON	1
+#define OFF	0
+static void
+rawmode(desc, turnon)
+int	desc;
+int	turnon;
+{
+  
+  TERMINAL sg;
+
+  if (desc < 0)
+    return;
+
+  ioctl (desc, TIOCGETP, &sg);
+
+  if (turnon) {
+#ifdef HAVE_TERMIO
+  	sg.c_lflag &= ~(ICANON);
+#else
+	sg.sg_flags |= RAW;
+#endif
+  } else {
+#ifdef HAVE_TERMIO
+  	sg.c_lflag |= ICANON;
+#else
+	sg.sg_flags &= ~(RAW);
+#endif
+  }
+  ioctl (desc, TIOCSETP, &sg);
+}
+
+/* Suck up all the input from the adapt */
+slurp_input()
+{
+  char buf[8];
+
+#ifdef HAVE_TERMIO
+  /* termio does the timeout for us.  */
+  while (read (adapt_desc, buf, 8) > 0);
+#else
+  alarm (timeout);
+  while (read (adapt_desc, buf, 8) > 0);
+  alarm (0);
+#endif
+}
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+static int
+readchar ()
+{
+  char buf;
+
+  buf = '\0';
+#ifdef HAVE_TERMIO
+  /* termio does the timeout for us.  */
+  read (adapt_desc, &buf, 1);
+#else
+  alarm (timeout);
+  if (read (adapt_desc, &buf, 1) < 0)
+    {
+      if (errno == EINTR)
+	error ("Timeout reading from remote system.");
+      else
+	perror_with_name ("remote");
+    }
+  alarm (0);
+#endif
+
+  if (buf == '\0')
+    error ("Timeout reading from remote system.");
+#if defined (LOG_FILE)
+  putc (buf & 0x7f, log_file);
+#endif
+  return buf & 0x7f;
+}
+
+/* Keep discarding input from the remote system, until STRING is found. 
+   Let the user break out immediately.  */
+static void
+expect (string)
+     char *string;
+{
+  char *p = string;
+
+  fflush(adapt_stream);
+  immediate_quit = 1;
+  while (1)
+    {
+      if (readchar() == *p)
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      return;
+	    }
+	}
+      else
+	p = string;
+    }
+}
+
+/* Keep discarding input until we see the adapt prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  adapt_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a adapt_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt ()
+{
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush (log_file);
+#endif
+  fflush(adapt_stream);
+  expect ("\n# ");
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit (ignore_space)
+     int ignore_space;
+{
+  int ch;
+  while (1)
+    {
+      ch = readchar ();
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt ();
+	  error ("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from adapt_desc and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Read a 32-bit hex word from the adapt, preceded by a space  */
+static long 
+get_hex_word()
+{
+  long val;
+  int j;
+      
+  val = 0;
+  for (j = 0; j < 8; j++)
+	val = (val << 4) + get_hex_digit (j == 0);
+  return val;
+}
+/* Get N 32-bit hex words from remote, each preceded by a space 
+   and put them in registers starting at REGNO.  */
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+	long val;
+	while (n--) {
+		val = get_hex_word();
+		supply_register(regno++,(char *) &val);
+	}
+}
+/* Called when SIGALRM signal sent due to alarm() timeout.  */
+#ifndef HAVE_TERMIO
+
+#ifndef __STDC__
+# ifndef volatile
+#  define volatile /**/
+# endif
+#endif
+volatile int n_alarms;
+
+void
+adapt_timer ()
+{
+#if 0
+  if (kiodebug)
+    printf ("adapt_timer called\n");
+#endif
+  n_alarms++;
+}
+#endif
+
+/* malloc'd name of the program on the remote system.  */
+static char *prog_name = NULL;
+
+/* Number of SIGTRAPs we need to simulate.  That is, the next
+   NEED_ARTIFICIAL_TRAP calls to adapt_wait should just return
+   SIGTRAP without actually waiting for anything.  */
+
+static int need_artificial_trap = 0;
+
+void
+adapt_kill(arg,from_tty)
+char	*arg;
+int	from_tty;
+{
+	fprintf (adapt_stream, "K");
+	fprintf (adapt_stream, "\r");
+	expect_prompt ();
+}
+/*
+ * Download a file specified in 'args', to the adapt. 
+ * FIXME: Assumes the file to download is a binary coff file.
+ */
+static void
+adapt_load(args,fromtty)
+char	*args;
+int	fromtty;
+{
+	FILE *fp;
+	int	n;
+	char	buffer[1024];
+	
+	if (!adapt_stream) {
+		printf_filtered("Adapt not open. Use 'target' command to open adapt\n");
+		return;
+	}
+
+  	/* OK, now read in the file.  Y=read, C=COFF, T=dTe port
+     		0=start address.  */
+
+#ifdef ASCII_COFF	/* Ascii coff */
+	fprintf (adapt_stream, "YA T,0\r");
+	fflush(adapt_stream); 	/* Just in case */
+	/* FIXME: should check args for only 1 argument */
+	sprintf(buffer,"cat %s | btoa > /tmp/#adapt-btoa",args);
+	system(buffer);
+	fp = fopen("/tmp/#adapt-btoa","r");
+	rawmode(adapt_desc,OFF);	
+	while (n=fread(buffer,1,1024,fp)) {
+		do { n -= write(adapt_desc,buffer,n); } while (n>0);
+		if (n<0) { perror("writing ascii coff"); break; }
+	}
+	fclose(fp);
+	rawmode(adapt_desc,ON);	
+	system("rm /tmp/#adapt-btoa");
+#else	/* Binary coff - can't get it to work .*/
+	fprintf (adapt_stream, "YC T,0\r");
+	fflush(adapt_stream); 	/* Just in case */
+	if (!(fp = fopen(args,"r"))) {
+		printf_filtered("Can't open %s\n",args);
+		return;
+	}
+	while (n=fread(buffer,1,512,fp)) {
+		do { n -= write(adapt_desc,buffer,n); } while (n>0);
+		if (n<0) { perror("writing ascii coff"); break; }
+	}
+	fclose(fp);
+#endif
+  	expect_prompt ();	/* Skip garbage that comes out */
+	fprintf (adapt_stream, "\r");
+  	expect_prompt ();
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+void
+adapt_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error ("Can't pass arguments to remote adapt process.");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  if (adapt_stream) {
+	adapt_kill(NULL,NULL);	 
+	adapt_clear_breakpoints();
+	init_wait_for_inferior ();
+	/* Clear the input because what the adapt sends back is different
+	 * depending on whether it was running or not.
+	 */
+	slurp_input();	/* After this there should be a prompt */
+	fprintf(adapt_stream,"\r"); 
+	expect_prompt();
+	printf_filtered("Do you want to download '%s' (y/n)? [y] : ",prog_name);
+	{	
+		char buffer[10];
+		gets(buffer);
+		if (*buffer != 'n') {
+			adapt_load(prog_name,0);
+		}
+	}
+
+#ifdef NOTDEF
+	/* Set the PC and wait for a go/cont */
+	  fprintf (adapt_stream, "G %x,N\r",entry_pt);
+	  printf_filtered("Now use the 'continue' command to start.\n"); 
+  	  expect_prompt ();
+#else
+  	insert_breakpoints ();  /* Needed to get correct instruction in cache */
+  	proceed(entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+#endif
+
+  } else {
+	printf_filtered("Adapt not open yet.\n");
+  }
+}
+
+/* Translate baud rates from integers to damn B_codes.  Unix should
+   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
+
+#ifndef B19200
+#define B19200 EXTA
+#endif
+#ifndef B38400
+#define B38400 EXTB
+#endif
+
+static struct {int rate, damn_b;} baudtab[] = {
+	{0, B0},
+	{50, B50},
+	{75, B75},
+	{110, B110},
+	{134, B134},
+	{150, B150},
+	{200, B200},
+	{300, B300},
+	{600, B600},
+	{1200, B1200},
+	{1800, B1800},
+	{2400, B2400},
+	{4800, B4800},
+	{9600, B9600},
+	{19200, B19200},
+	{38400, B38400},
+	{-1, -1},
+};
+
+static int damn_b (rate)
+     int rate;
+{
+  int i;
+
+  for (i = 0; baudtab[i].rate != -1; i++)
+    if (rate == baudtab[i].rate) return baudtab[i].damn_b;
+  return B38400;	/* Random */
+}
+
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication, then a space,
+   then the baud rate.
+ */
+
+static int baudrate = 9600;
+static void
+adapt_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  TERMINAL sg;
+  unsigned int prl;
+  char *p;
+
+  /* Find the first whitespace character, it separates dev_name from
+     prog_name.  */
+  if (name == 0)
+    goto erroid;
+
+  for (p = name;
+       *p != '\0' && !isspace (*p); p++)
+    ;
+  if (*p == '\0')
+erroid:
+    error ("\
+Please include the name of the device for the serial port,\n\
+the baud rate, and the name of the program to run on the remote system.");
+  dev_name = (char*)xmalloc(p - name + 1);
+  strncpy (dev_name, name, p - name);
+  dev_name[p - name] = '\0';
+
+  /* Skip over the whitespace after dev_name */
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (1 != sscanf (p, "%d ", &baudrate))
+    goto erroid;
+
+  /* Skip the number and then the spaces */
+  for (; isdigit (*p); p++)
+    /*EMPTY*/;
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (prog_name != NULL)
+    free (prog_name);
+  prog_name = savestring (p, strlen (p));
+
+  adapt_close (0);
+
+  adapt_desc = open (dev_name, O_RDWR);
+  if (adapt_desc < 0)
+    perror_with_name (dev_name);
+  ioctl (adapt_desc, TIOCGETP, &sg);
+#if ! defined(COMPILE_CHECK) 
+#ifdef HAVE_TERMIO
+  sg.c_cc[VMIN] = 0;		/* read with timeout.  */
+  sg.c_cc[VTIME] = timeout * 10;
+  sg.c_lflag &= ~(ICANON | ECHO);
+  sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);
+#else
+  sg.sg_ispeed = damn_b (baudrate);
+  sg.sg_ospeed = damn_b (baudrate);
+  sg.sg_flags |= RAW | ANYP;
+  sg.sg_flags &= ~ECHO;
+#endif
+
+  ioctl (adapt_desc, TIOCSETP, &sg);
+  adapt_stream = fdopen (adapt_desc, "r+");
+#endif /* compile_check */
+  push_target (&adapt_ops);
+
+#ifndef HAVE_TERMIO
+#ifndef NO_SIGINTERRUPT
+  /* Cause SIGALRM's to make reads fail with EINTR instead of resuming
+     the read.  */
+  if (siginterrupt (SIGALRM, 1) != 0)
+    perror ("adapt_open: error in siginterrupt");
+#endif
+
+  /* Set up read timeout timer.  */
+  if ((void (*)) signal (SIGALRM, adapt_timer) == (void (*)) -1)
+    perror ("adapt_open: error in signal");
+#endif
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+#endif
+
+  /* Put this port into NORMAL mode, send the 'normal' character */
+  write(adapt_desc, "
", 1);	/* Control A */
+  write(adapt_desc, "\r", 1);	
+  expect_prompt ();
+  
+  /* Hello?  Are you there?  */
+  write (adapt_desc, "\r", 1);
+ 
+  expect_prompt ();
+
+  /* Clear any break points */
+  adapt_clear_breakpoints();
+
+  /* Print out some stuff, letting the user now what's going on */
+  printf_filtered("Connected to an Adapt via %s.\n", dev_name);
+    /* FIXME: can this restriction be removed? */
+  printf_filtered("Remote debugging using virtual addresses works only\n");
+  printf_filtered("\twhen virtual addresses map 1:1 to physical addresses.\n"); 
+  if (processor_type != a29k_freeze_mode) {
+	fprintf_filtered(gdb_stderr,
+	"Freeze-mode debugging not available, and can only be done on an A29050.\n");
+  }
+}
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+adapt_close (quitting)
+     int quitting;
+{
+
+  /* Clear any break points */
+  adapt_clear_breakpoints();
+
+  /* Put this port back into REMOTE mode */ 
+  if (adapt_stream) {
+     fflush(adapt_stream);
+     sleep(1);		/* Let any output make it all the way back */
+     write(adapt_desc, "R\r", 2);
+  }
+
+  /* Due to a bug in Unix, fclose closes not only the stdio stream,
+     but also the file descriptor.  So we don't actually close
+     adapt_desc.  */
+  if (adapt_stream)
+    fclose (adapt_stream);	/* This also closes adapt_desc */
+  if (adapt_desc >= 0)
+    /* close (adapt_desc); */
+
+  /* Do not try to close adapt_desc again, later in the program.  */
+  adapt_stream = NULL;
+  adapt_desc = -1;
+
+#if defined (LOG_FILE)
+  if (log_file) {
+    if (ferror (log_file))
+      printf_filtered ("Error writing log file.\n");
+    if (fclose (log_file) != 0)
+      printf_filtered ("Error closing log file.\n");
+    log_file = NULL;
+  }
+#endif
+}
+
+/* Attach to the target that is already loaded and possibly running */
+static void
+adapt_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+
+  if (from_tty)
+      printf_filtered ("Attaching to remote program %s.\n", prog_name);
+
+  /* Send the adapt a kill. It is ok if it is not already running */
+  fprintf(adapt_stream, "K\r"); fflush(adapt_stream);
+  expect_prompt();		/* Slurp the echo */
+}
+
+
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+void
+adapt_detach (args,from_tty)
+     char *args;
+     int from_tty;
+{
+
+  if (adapt_stream) { /* Send it on its way (tell it to continue)  */
+	adapt_clear_breakpoints();
+  	fprintf(adapt_stream,"G\r");
+  }
+ 
+  pop_target();		/* calls adapt_close to do the real work */
+  if (from_tty)
+    printf_filtered ("Ending remote %s debugging\n", target_shortname);
+}
+ 
+/* Tell the remote machine to resume.  */
+
+void
+adapt_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  if (step)	
+    {
+      write (adapt_desc, "t 1,s\r", 6);
+      /* Wait for the echo.  */
+      expect ("t 1,s\r\n");
+      /* Then comes a line containing the instruction we stepped to.  */
+      expect ("@");
+      /* Then we get the prompt.  */
+      expect_prompt ();
+
+      /* Force the next adapt_wait to return a trap.  Not doing anything
+         about I/O from the target means that the user has to type
+         "continue" to see any.  FIXME, this should be fixed.  */
+      need_artificial_trap = 1;
+    }
+  else
+    {
+      write (adapt_desc, "G\r", 2);
+      /* Swallow the echo.  */
+      expect_prompt(); 
+    }
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+int
+adapt_wait (status)
+     struct target_waitstatus *status;
+{
+  /* Strings to look for.  '?' means match any single character.  
+     Note that with the algorithm we use, the initial character
+     of the string cannot recur in the string, or we will not
+     find some cases of the string in the input.  */
+  
+  static char bpt[] = "@";
+  /* It would be tempting to look for "\n[__exit + 0x8]\n"
+     but that requires loading symbols with "yc i" and even if
+     we did do that we don't know that the file has symbols.  */
+  static char exitmsg[] = "@????????I    JMPTI     GR121,LR0";
+  char *bp = bpt;
+  char *ep = exitmsg;
+
+  /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars.  */
+  char swallowed[50];
+  /* Current position in swallowed.  */
+  char *swallowed_p = swallowed;
+
+  int ch;
+  int ch_handled;
+  int old_timeout = timeout;
+  int old_immediate_quit = immediate_quit;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  if (need_artificial_trap != 0)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      need_artificial_trap--;
+      return 0;
+    }
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+  immediate_quit = 1;	/* Helps ability to QUIT */
+  while (1) {
+      QUIT;		/* Let user quit and leave process running */
+      ch_handled = 0;
+      ch = readchar ();
+      if (ch == *bp) {
+	  bp++;
+	  if (*bp == '\0')
+	    break;
+	  ch_handled = 1;
+
+	  *swallowed_p++ = ch;
+      } else
+	bp = bpt;
+      if (ch == *ep || *ep == '?') {
+	  ep++;
+	  if (*ep == '\0')
+	    break;
+
+	  if (!ch_handled)
+	    *swallowed_p++ = ch;
+	  ch_handled = 1;
+      } else
+	ep = exitmsg;
+      if (!ch_handled) {
+	  char *p;
+	  /* Print out any characters which have been swallowed.  */
+	  for (p = swallowed; p < swallowed_p; ++p)
+	    putc (*p, stdout);
+	  swallowed_p = swallowed;
+	  putc (ch, stdout);
+      }
+  }
+  expect_prompt ();
+  if (*bp== '\0')
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+    }
+  else
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = 0;
+    }
+  timeout = old_timeout;
+  immediate_quit = old_immediate_quit;
+  return 0;
+}
+
+/* Return the name of register number REGNO
+   in the form input and output by adapt.
+
+   Returns a pointer to a static buffer containing the answer.  */
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char buf[80];
+  if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32 )
+    sprintf (buf, "GR%03d", regno - GR96_REGNUM + 96);
+#if defined(GR64_REGNUM)
+  else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
+    sprintf (buf, "GR%03d", regno - GR64_REGNUM + 64);
+#endif
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+    sprintf (buf, "LR%03d", regno - LR0_REGNUM);
+  else if (regno == Q_REGNUM) 
+    strcpy (buf, "SR131");
+  else if (regno >= BP_REGNUM && regno <= CR_REGNUM)
+    sprintf (buf, "SR%03d", regno - BP_REGNUM + 133);
+  else if (regno == ALU_REGNUM)
+    strcpy (buf, "SR132");
+  else if (regno >= IPC_REGNUM && regno <= IPB_REGNUM)
+    sprintf (buf, "SR%03d", regno - IPC_REGNUM + 128);
+  else if (regno >= VAB_REGNUM && regno <= LRU_REGNUM) {
+    /* When a 29050 is in freeze-mode, read shadow pcs instead */
+    if ((regno >= NPC_REGNUM && regno <= PC2_REGNUM) && USE_SHADOW_PC)
+    	sprintf (buf, "SR%03d", regno - NPC_REGNUM + 20);
+    else
+    	sprintf (buf, "SR%03d", regno - VAB_REGNUM);
+  }
+  else if (regno == GR1_REGNUM)
+    strcpy (buf, "GR001");
+  return buf;
+}
+
+/* Read the remote registers.  */
+
+static void
+adapt_fetch_registers ()
+{
+  int reg_index;
+  int regnum_index;
+  char tempbuf[10];
+  int	sreg_buf[16];
+  int i,j;
+
+/* 
+ * Global registers
+ */
+#if defined(GR64_REGNUM)
+  write (adapt_desc, "dw gr64,gr95\r", 13);
+  for (reg_index = 64, regnum_index = GR64_REGNUM;
+       reg_index < 96;
+       reg_index += 4, regnum_index += 4)
+    {
+      sprintf (tempbuf, "GR%03d ", reg_index);
+      expect (tempbuf);
+      get_hex_regs (4, regnum_index);
+      expect ("\n");
+    }
+#endif
+  write (adapt_desc, "dw gr96,gr127\r", 14);
+  for (reg_index = 96, regnum_index = GR96_REGNUM;
+       reg_index < 128;
+       reg_index += 4, regnum_index += 4)
+    {
+      sprintf (tempbuf, "GR%03d ", reg_index);
+      expect (tempbuf);
+      get_hex_regs (4, regnum_index);
+      expect ("\n");
+    }
+
+/* 
+ * Local registers
+ */
+  for (i = 0; i < 128; i += 32)
+    {
+      /* The PC has a tendency to hang if we get these
+	 all in one fell swoop ("dw lr0,lr127").  */
+      sprintf (tempbuf, "dw lr%d\r", i);
+      write (adapt_desc, tempbuf, strlen (tempbuf));
+      for (reg_index = i, regnum_index = LR0_REGNUM + i;
+	   reg_index < i + 32;
+	   reg_index += 4, regnum_index += 4)
+	{
+	  sprintf (tempbuf, "LR%03d ", reg_index);
+	  expect (tempbuf);
+	  get_hex_regs (4, regnum_index);
+	  expect ("\n");
+	}
+    }
+
+/* 
+ * Special registers
+ */
+  sprintf (tempbuf, "dw sr0\r");
+  write (adapt_desc, tempbuf, strlen (tempbuf));
+  for (i=0 ; i<4 ; i++) {			/* SR0 - SR14 */
+        sprintf (tempbuf, "SR%3d",i*4);
+	expect(tempbuf);
+	for (j=0 ; j < (i==3 ? 3 : 4) ; j++)
+		sreg_buf[i*4 + j] = get_hex_word();
+  }		
+  expect_prompt();
+  /* 
+   * Read the pcs individually if we are in freeze mode.
+   * See get_reg_name(), it translates the register names for the pcs to
+   * the names of the shadow pcs.
+   */ 
+  if (USE_SHADOW_PC)  {
+	  sreg_buf[10] = read_register(NPC_REGNUM);	/* pc0 */
+	  sreg_buf[11] = read_register(PC_REGNUM);	/* pc1 */
+	  sreg_buf[12] = read_register(PC2_REGNUM);	/* pc2 */
+  }
+  for (i=0 ; i<14 ; i++)		/* Supply vab -> lru */
+ 	supply_register(VAB_REGNUM+i, (char *) &sreg_buf[i]);
+  sprintf (tempbuf, "dw sr128\r");
+  write (adapt_desc, tempbuf, strlen (tempbuf));
+  for (i=0 ; i<2 ; i++) {			/* SR128 - SR135 */
+        sprintf (tempbuf, "SR%3d",128 + i*4);
+	expect(tempbuf);
+	for (j=0 ; j<4 ; j++)
+		sreg_buf[i*4 + j] = get_hex_word();
+  }		
+  expect_prompt();
+  supply_register(IPC_REGNUM,(char *) &sreg_buf[0]);
+  supply_register(IPA_REGNUM,(char *) &sreg_buf[1]);
+  supply_register(IPB_REGNUM,(char *) &sreg_buf[2]);
+  supply_register(Q_REGNUM,  (char *) &sreg_buf[3]);
+		/* Skip ALU */
+  supply_register(BP_REGNUM, (char *) &sreg_buf[5]);
+  supply_register(FC_REGNUM, (char *) &sreg_buf[6]);
+  supply_register(CR_REGNUM, (char *) &sreg_buf[7]);
+
+  /* There doesn't seem to be any way to get these.  */
+  {
+    int val = -1;
+    supply_register (FPE_REGNUM, (char *) &val);
+    supply_register (INTE_REGNUM, (char *) &val);
+    supply_register (FPS_REGNUM, (char *) &val);
+    supply_register (EXO_REGNUM, (char *) &val);
+  }
+
+  write (adapt_desc, "dw gr1,gr1\r", 11);
+  expect ("GR001 ");
+  get_hex_regs (1, GR1_REGNUM);
+  expect_prompt ();
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.
+ */
+static void
+adapt_fetch_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    adapt_fetch_registers ();
+  else
+    {
+      char *name = get_reg_name (regno);
+      fprintf (adapt_stream, "dw %s,%s\r", name, name);
+      expect (name);
+      expect (" ");
+      get_hex_regs (1, regno);
+      expect_prompt ();
+    }
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+adapt_store_registers ()
+{
+  int i, j;
+
+  fprintf (adapt_stream, "s gr1,%x\r", read_register (GR1_REGNUM));
+  expect_prompt ();
+
+#if defined(GR64_REGNUM)
+  for (j = 0; j < 32; j += 16)
+    {
+      fprintf (adapt_stream, "s gr%d,", j + 64);
+      for (i = 0; i < 15; ++i) 
+	fprintf (adapt_stream, "%x,", read_register (GR64_REGNUM + j + i));
+      fprintf (adapt_stream, "%x\r", read_register (GR64_REGNUM + j + 15));
+      expect_prompt ();
+    }
+#endif
+  for (j = 0; j < 32; j += 16)
+    {
+      fprintf (adapt_stream, "s gr%d,", j + 96);
+      for (i = 0; i < 15; ++i) 
+	fprintf (adapt_stream, "%x,", read_register (GR96_REGNUM + j + i));
+      fprintf (adapt_stream, "%x\r", read_register (GR96_REGNUM + j + 15));
+      expect_prompt ();
+    }
+
+  for (j = 0; j < 128; j += 16)
+    {
+      fprintf (adapt_stream, "s lr%d,", j);
+      for (i = 0; i < 15; ++i) 
+	fprintf (adapt_stream, "%x,", read_register (LR0_REGNUM + j + i));
+      fprintf (adapt_stream, "%x\r", read_register (LR0_REGNUM + j + 15));
+      expect_prompt ();
+    }
+
+  fprintf (adapt_stream, "s sr128,%x,%x,%x\r", read_register (IPC_REGNUM),
+	   read_register (IPA_REGNUM), read_register (IPB_REGNUM));
+  expect_prompt ();
+  fprintf (adapt_stream, "s sr133,%x,%x,%x\r", read_register (BP_REGNUM),
+	   read_register (FC_REGNUM), read_register (CR_REGNUM));
+  expect_prompt ();
+  fprintf (adapt_stream, "s sr131,%x\r", read_register (Q_REGNUM));
+  expect_prompt ();
+  fprintf (adapt_stream, "s sr0,");
+  for (i=0 ; i<7 ; ++i)
+    fprintf (adapt_stream, "%x,", read_register (VAB_REGNUM + i));
+  expect_prompt ();
+  fprintf (adapt_stream, "s sr7,");
+  for (i=7; i<14 ; ++i)
+    fprintf (adapt_stream, "%x,", read_register (VAB_REGNUM + i));
+  expect_prompt ();
+}
+
+/* Store register REGNO, or all if REGNO == -1.
+   Return errno value.  */
+void
+adapt_store_register (regno)
+     int regno;
+{
+  /* printf("adapt_store_register() called.\n"); fflush(stdout); /* */
+  if (regno == -1)
+    adapt_store_registers ();
+  else
+    {
+      char *name = get_reg_name (regno);
+      fprintf (adapt_stream, "s %s,%x\r", name, read_register (regno));
+      /* Setting GR1 changes the numbers of all the locals, so
+	 invalidate the register cache.  Do this *after* calling
+	 read_register, because we want read_register to return the
+	 value that write_register has just stuffed into the registers
+	 array, not the value of the register fetched from the
+	 inferior.  */
+      if (regno == GR1_REGNUM)
+	registers_changed ();
+      expect_prompt ();
+    }
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+void
+adapt_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static CORE_ADDR 
+translate_addr(addr)
+CORE_ADDR addr;
+{
+#if defined(KERNEL_DEBUGGING)
+	/* Check for a virtual address in the kernel */
+	/* Assume physical address of ublock is in  paddr_u register */
+	if (addr >= UVADDR) {
+		/* PADDR_U register holds the physical address of the ublock */
+		CORE_ADDR i = (CORE_ADDR)read_register(PADDR_U_REGNUM);	
+		return(i + addr - (CORE_ADDR)UVADDR);
+	} else {
+		return(addr);
+	}
+#else
+	return(addr);
+#endif
+}
+
+
+/* FIXME!  Merge these two.  */
+int
+adapt_xfer_inferior_memory (memaddr, myaddr, len, write)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+{
+
+  memaddr = translate_addr(memaddr);
+
+  if (write)
+    return adapt_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return adapt_read_inferior_memory (memaddr, myaddr, len);
+}
+
+void
+adapt_files_info ()
+{
+  printf_filtered("\tAttached to %s at %d baud and running program %s\n",
+	  dev_name, baudrate, prog_name);
+  printf_filtered("\ton an %s processor.\n", processor_name[processor_type]);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns errno value.  
+ * sb/sh instructions don't work on unaligned addresses, when TU=1. 
+ */
+int
+adapt_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i;
+  unsigned int cps;
+
+  /* Turn TU bit off so we can do 'sb' commands */
+  cps = read_register(CPS_REGNUM);
+  if (cps & 0x00000800)
+  	write_register(CPS_REGNUM,cps&~(0x00000800));
+
+  for (i = 0; i < len; i++)
+    {
+      if ((i % 16) == 0)
+	fprintf (adapt_stream, "sb %x,", memaddr + i);
+      if ((i % 16) == 15 || i == len - 1)
+	{
+	  fprintf (adapt_stream, "%x\r", ((unsigned char *)myaddr)[i]);
+	  expect_prompt ();
+	}
+      else
+	fprintf (adapt_stream, "%x,", ((unsigned char *)myaddr)[i]);
+    }
+  /* Restore the old value of cps if the TU bit was on */
+  if (cps & 0x00000800)
+  	write_register(CPS_REGNUM,cps);
+  return len;
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns errno value.  */
+int
+adapt_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i;
+
+  /* Number of bytes read so far.  */
+  int count;
+
+  /* Starting address of this pass.  */
+  unsigned long startaddr;
+
+  /* Number of bytes to read in this pass.  */
+  int len_this_pass;
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     adapt_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len to memaddr and gets 0.  */
+  /* However, something like
+     adapt_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+
+  if (((memaddr - 1) + len) < memaddr)
+    return EIO;
+  
+  startaddr = memaddr;
+  count = 0;
+  while (count < len)
+    {
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	len_this_pass -= startaddr % 16;
+      if (len_this_pass > (len - count))
+	len_this_pass = (len - count);
+
+      fprintf (adapt_stream, "db %x,%x\r", startaddr,
+	       (startaddr - 1) + len_this_pass);
+
+#ifdef NOTDEF	/* Why do this */
+      expect ("\n");
+      /* Look for 8 hex digits.  */
+      i = 0;
+      while (1)
+	{
+	  if (isxdigit (readchar ()))
+	    ++i;
+	  else
+	    {
+	      expect_prompt ();
+	      error ("Hex digit expected from remote system.");
+	    }
+	  if (i >= 8)
+	    break;
+	}
+#endif /* NOTDEF */
+
+      expect ("  ");
+
+      for (i = 0; i < len_this_pass; i++)
+	get_hex_byte (&myaddr[count++]);
+
+      expect_prompt ();
+
+      startaddr += len_this_pass;
+    }
+  return count;
+}
+
+#define MAX_BREAKS	8
+static int num_brkpts=0;
+static int
+adapt_insert_breakpoint(addr, save)
+CORE_ADDR	addr;
+char		*save;	/* Throw away, let adapt save instructions */
+{
+  if (num_brkpts < MAX_BREAKS) {
+  	num_brkpts++;
+  	fprintf (adapt_stream, "B %x", addr);
+  	fprintf (adapt_stream, "\r");
+  	expect_prompt ();
+	return(0);	/* Success */
+  } else {
+	fprintf_filtered(gdb_stderr,
+		"Too many break points, break point not installed\n");
+	return(1);	/* Failure */
+  }
+
+}
+static int
+adapt_remove_breakpoint(addr, save)
+CORE_ADDR	addr;
+char		*save;	/* Throw away, let adapt save instructions */
+{
+  if (num_brkpts > 0) {
+	  num_brkpts--;
+	  fprintf (adapt_stream, "BR %x", addr);
+	  fprintf (adapt_stream, "\r");
+	  fflush (adapt_stream);
+	  expect_prompt ();
+  }
+  return(0);
+}
+
+/* Clear the adapts notion of what the break points are */
+static int
+adapt_clear_breakpoints() 
+{ 
+  if (adapt_stream) {
+  	fprintf (adapt_stream, "BR");	/* Clear all break points */
+  	fprintf (adapt_stream, "\r");
+  	fflush(adapt_stream);
+  	expect_prompt ();
+  }
+  num_brkpts = 0;
+}
+static void
+adapt_mourn() 
+{ 
+  adapt_clear_breakpoints();
+  pop_target ();                /* Pop back to no-child state */
+  generic_mourn_inferior ();
+}
+
+/* Display everthing we read in from the adapt until we match/see the
+ * specified string
+ */
+static int
+display_until(str)
+char	*str;
+{
+	int	i=0,j,c;
+
+	while (c=readchar()) {
+		if (c==str[i]) {
+			i++;
+			if (i == strlen(str)) return;
+		} else {
+			if (i) {
+			    for (j=0 ; j<i ; j++) /* Put everthing we matched */
+				putchar(str[j]);
+			    i=0;
+			}
+			putchar(c);
+		}	
+	}
+
+}
+
+
+/* Put a command string, in args, out to the adapt.  The adapt is assumed to
+   be in raw mode, all writing/reading done through adapt_desc.
+   Ouput from the adapt is placed on the users terminal until the
+   prompt from the adapt is seen.
+   FIXME: Can't handle commands that take input.  */
+
+void
+adapt_com (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+	if (!adapt_stream) {
+		printf_filtered("Adapt not open.  Use the 'target' command to open.\n");
+		return;
+	}
+
+	/* Clear all input so only command relative output is displayed */
+	slurp_input();	
+
+	switch(islower(args[0]) ? toupper(args[0]) : args[0]) {
+	default:
+		printf_filtered("Unknown/Unimplemented adapt command '%s'\n",args);
+		break;
+	case 'G':	/* Go, begin execution */
+		write(adapt_desc,args,strlen(args));
+		write(adapt_desc,"\r",1);
+		expect_prompt();
+		break;
+	case 'B':	/* Break points, B or BR */
+	case 'C':	/* Check current 29k status (running/halted) */
+	case 'D':	/* Display data/registers */ 
+	case 'I':	/* Input from i/o space */
+	case 'J':	/* Jam an instruction */
+	case 'K':	/* Kill, stop execution */
+	case 'L':	/* Disassemble */
+	case 'O':	/* Output to i/o space */
+	case 'T':	/* Trace */ 
+	case 'P':	/* Pulse an input line */ 
+	case 'X':	/* Examine special purpose registers */ 
+	case 'Z':	/* Display trace buffer */ 
+		write(adapt_desc,args,strlen(args));
+		write(adapt_desc,"\r",1);
+		expect(args);		/* Don't display the command */
+		display_until("# ");
+		break;
+	/* Begin commands that take input in the form 'c x,y[,z...]' */
+	case 'S':	/* Set memory or register */
+		if (strchr(args,',')) {	/* Assume it is properly formatted */
+			write(adapt_desc,args,strlen(args));
+			write(adapt_desc,"\r",1);
+			expect_prompt();
+		}
+		break;
+	}
+}
+
+/* Define the target subroutine names */
+
+struct target_ops adapt_ops ;
+
+static void 
+init_adapt_ops(void)
+{
+  adapt_ops.to_shortname = 	"adapt";
+  adapt_ops.to_longname = 	"Remote AMD `Adapt' target";
+  adapt_ops.to_doc = 	"Remote debug an AMD 290*0 using an `Adapt' monitor via RS232";
+  adapt_ops.to_open = 	adapt_open;
+  adapt_ops.to_close = 	adapt_close;
+  adapt_ops.to_attach = adapt_attach;
+  adapt_ops.to_post_attach = NULL;
+  adapt_ops.to_require_attach = NULL;  
+  adapt_ops.to_detach = adapt_detach;
+  adapt_ops.to_require_detach = NULL;
+  adapt_ops.to_resume = adapt_resume;
+  adapt_ops.to_wait  = 	adapt_wait;
+  adapt_ops.to_post_wait = NULL;
+  adapt_ops.to_fetch_registers  = adapt_fetch_register;
+  adapt_ops.to_store_registers  = adapt_store_register;
+  adapt_ops.to_prepare_to_store = adapt_prepare_to_store;
+  adapt_ops.to_xfer_memory  = 	adapt_xfer_inferior_memory;
+  adapt_ops.to_files_info  = 	adapt_files_info;
+  adapt_ops.to_insert_breakpoint = adapt_insert_breakpoint;
+  adapt_ops.to_remove_breakpoint = adapt_remove_breakpoint; 
+  adapt_ops.to_terminal_init  = 	0;
+  adapt_ops.to_terminal_inferior = 	0;
+  adapt_ops.to_terminal_ours_for_output = 	0;
+  adapt_ops.to_terminal_ours  = 	0;
+  adapt_ops.to_terminal_info  = 	0;
+  adapt_ops.to_kill  = 	adapt_kill; 		
+  adapt_ops.to_load  = 	adapt_load;
+  adapt_ops.to_lookup_symbol = 	0; 		
+  adapt_ops.to_create_inferior =  adapt_create_inferior;
+  adapt_ops.to_post_startup_inferior = NULL;
+  adapt_ops.to_acknowledge_created_inferior = NULL;
+  adapt_ops.to_clone_and_follow_inferior = NULL;          
+  adapt_ops.to_post_follow_inferior_by_clone = NULL;  
+  adapt_ops.to_insert_fork_catchpoint = NULL;
+  adapt_ops.to_remove_fork_catchpoint = NULL;
+  adapt_ops.to_insert_vfork_catchpoint = NULL;
+  adapt_ops.to_remove_vfork_catchpoint = NULL;                     
+  adapt_ops.to_has_forked = NULL;
+  adapt_ops.to_has_vforked = NULL;
+  adapt_ops.to_can_follow_vfork_prior_to_exec = NULL;                        
+  adapt_ops.to_post_follow_vfork = NULL; 	
+  adapt_ops.to_insert_exec_catchpoint = NULL;
+  adapt_ops.to_remove_exec_catchpoint = NULL;
+  adapt_ops.to_has_execd = NULL;
+  adapt_ops.to_reported_exec_events_per_exec_call = NULL;
+  adapt_ops.to_has_exited = NULL;
+  adapt_ops.to_mourn_inferior =   adapt_mourn; 		
+  adapt_ops.to_can_run  = 	0; 
+  adapt_ops.to_notice_signals = 	0;
+  adapt_ops.to_thread_alive  = 	0;
+  adapt_ops.to_stop  = 	0 ; /* process_stratum; */
+  adapt_ops.to_pid_to_exec_file = NULL;
+  adapt_ops.to_core_file_to_sym_file = NULL;
+  adapt_ops.to_stratum = 	0; 
+  adapt_ops.DONT_USE = 	0 ;
+  adapt_ops.to_has_all_memory = 	1;
+  adapt_ops.to_has_memory = 	1;
+  adapt_ops.to_has_stack = 	1;
+  adapt_ops.to_has_registers = 	1;
+  adapt_ops.to_has_execution = 	0;
+  adapt_ops.to_sections = 	0;
+  adapt_ops.to_sections_end = 	0 ;
+  adapt_ops.to_magic = 	OPS_MAGIC; 
+} /* init_adapt_ops */
+
+void
+_initialize_remote_adapt ()
+{
+  init_adapt_ops() ;
+  add_target (&adapt_ops);
+  add_com ("adapt <command>", class_obscure, adapt_com,
+ 	"Send a command to the AMD Adapt remote monitor.");
+}
diff --git a/gdb/remote-array.c b/gdb/remote-array.c
new file mode 100644
index 0000000..624871c
--- /dev/null
+++ b/gdb/remote-array.c
@@ -0,0 +1,1497 @@
+/* Remote debugging interface for Array Tech RAID controller..
+   Copyright 90, 91, 92, 93, 94, 1995, 1998  Free Software Foundation, Inc.
+   Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+
+   This module talks to a debug monitor called 'MONITOR', which
+   We communicate with MONITOR via either a direct serial line, or a TCP
+   (or possibly TELNET) stream to a terminal multiplexor,
+   which in turn talks to the target board.
+
+  This file is part of GDB.
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; if not, write to the Free Software
+  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <ctype.h>
+#include <signal.h>
+#include <sys/types.h>
+#include "gdb_string.h"
+#include "command.h"
+#include "serial.h"
+#include "monitor.h"
+#include "remote-utils.h"
+
+extern int baud_rate;
+
+#define ARRAY_PROMPT ">> "
+
+#define SWAP_TARGET_AND_HOST(buffer,len) 				\
+  do									\
+    {									\
+      if (TARGET_BYTE_ORDER != HOST_BYTE_ORDER)				\
+	{								\
+	  char tmp;							\
+	  char *p = (char *)(buffer);					\
+	  char *q = ((char *)(buffer)) + len - 1;		   	\
+	  for (; p < q; p++, q--)				 	\
+	    {								\
+	      tmp = *q;							\
+	      *q = *p;							\
+	      *p = tmp;							\
+	    }								\
+	}								\
+    }									\
+  while (0)
+
+static void debuglogs PARAMS((int, char *, ...));
+static void array_open();
+static void array_close();
+static void array_detach();
+static void array_attach();
+static void array_resume();
+static void array_fetch_register();
+static void array_store_register();
+static void array_fetch_registers();
+static void array_store_registers();
+static void array_prepare_to_store();
+static void array_files_info();
+static void array_kill();
+static void array_create_inferior();
+static void array_mourn_inferior();
+static void make_gdb_packet();
+static int array_xfer_memory();
+static int array_wait();
+static int array_insert_breakpoint();
+static int array_remove_breakpoint();
+static int tohex();
+static int to_hex();
+static int from_hex();
+static int array_send_packet();
+static int array_get_packet();
+static unsigned long ascii2hexword();
+static void hexword2ascii();
+
+extern char *version;
+
+#define LOG_FILE "monitor.log"
+#if defined (LOG_FILE)
+FILE *log_file;
+#endif
+
+static int timeout = 30;
+/* Having this larger than 400 causes us to be incompatible with m68k-stub.c
+   and i386-stub.c.  Normally, no one would notice because it only matters
+   for writing large chunks of memory (e.g. in downloads).  Also, this needs
+   to be more than 400 if required to hold the registers (see below, where
+   we round it up based on REGISTER_BYTES).  */
+#define PBUFSIZ 400
+
+/* 
+ * Descriptor for I/O to remote machine.  Initialize it to NULL so that
+ * array_open knows that we don't have a file open when the program starts.
+ */
+serial_t array_desc = NULL;
+
+/*
+ * this array of registers need to match the indexes used by GDB. The
+ * whole reason this exists is cause the various ROM monitors use
+ * different strings than GDB does, and doesn't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+extern char *tmp_mips_processor_type;
+extern int mips_set_processor_type();
+
+static struct target_ops array_ops ;
+
+static void 
+init_array_ops(void)
+{
+  array_ops.to_shortname =   "array";	
+  array_ops.to_longname = 		
+    "Debug using the standard GDB remote protocol for the Array Tech target.",
+    array_ops.to_doc = 			
+    "Debug using the standard GDB remote protocol for the Array Tech target.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya)." ;
+  array_ops.to_open =   array_open;	
+  array_ops.to_close =   array_close;	
+  array_ops.to_attach =   NULL;
+  array_ops.to_post_attach = NULL;		
+  array_ops.to_require_attach = NULL;
+  array_ops.to_detach =   array_detach;	
+  array_ops.to_require_detach = NULL;
+  array_ops.to_resume =   array_resume;	
+  array_ops.to_wait  =   array_wait;	
+  array_ops.to_post_wait = NULL;
+  array_ops.to_fetch_registers  =   array_fetch_registers;
+  array_ops.to_store_registers  =   array_store_registers;
+  array_ops.to_prepare_to_store =   array_prepare_to_store;
+  array_ops.to_xfer_memory  =   array_xfer_memory;		
+  array_ops.to_files_info  =   array_files_info;		
+  array_ops.to_insert_breakpoint =   array_insert_breakpoint;	
+  array_ops.to_remove_breakpoint =   array_remove_breakpoint;	
+  array_ops.to_terminal_init  =   0;				
+  array_ops.to_terminal_inferior =   0;				
+  array_ops.to_terminal_ours_for_output =   0;			
+  array_ops.to_terminal_ours  =   0;				
+  array_ops.to_terminal_info  =   0;				
+  array_ops.to_kill  =   array_kill;		
+  array_ops.to_load  =   0;			
+  array_ops.to_lookup_symbol =   0;		
+  array_ops.to_create_inferior =   array_create_inferior;	
+  array_ops.to_post_startup_inferior = NULL;
+  array_ops.to_acknowledge_created_inferior = NULL;
+  array_ops.to_clone_and_follow_inferior = NULL;          
+  array_ops.to_post_follow_inferior_by_clone = NULL;  
+  array_ops.to_insert_fork_catchpoint = NULL;
+  array_ops.to_remove_fork_catchpoint = NULL;
+  array_ops.to_insert_vfork_catchpoint = NULL;
+  array_ops.to_remove_vfork_catchpoint = NULL;                      
+  array_ops.to_has_forked = NULL;
+  array_ops.to_has_vforked = NULL;            
+  array_ops.to_can_follow_vfork_prior_to_exec = NULL;            
+  array_ops.to_post_follow_vfork = NULL;
+  array_ops.to_insert_exec_catchpoint = NULL;
+  array_ops.to_remove_exec_catchpoint = NULL;
+  array_ops.to_has_execd = NULL;
+  array_ops.to_reported_exec_events_per_exec_call = NULL;
+  array_ops.to_has_exited = NULL;
+  array_ops.to_mourn_inferior =   array_mourn_inferior;		
+  array_ops.to_can_run  =   0;		
+  array_ops.to_notice_signals =   0; 	
+  array_ops.to_thread_alive  =   0;	
+  array_ops.to_stop  =   0;
+  array_ops.to_pid_to_exec_file = NULL;
+  array_ops.to_core_file_to_sym_file = NULL;         
+  array_ops.to_stratum =   process_stratum;	
+  array_ops.DONT_USE =   0;			
+  array_ops.to_has_all_memory =   1;		
+  array_ops.to_has_memory =   1;		
+  array_ops.to_has_stack =   1;			
+  array_ops.to_has_registers =   1;		
+  array_ops.to_has_execution =   1;		
+  array_ops.to_sections =   0;			
+  array_ops.to_sections_end =   0;		
+  array_ops.to_magic =   OPS_MAGIC;		
+};
+
+/*
+ * printf_monitor -- send data to monitor.  Works just like printf.
+ */
+static void
+#ifdef ANSI_PROTOTYPES
+printf_monitor(char *pattern, ...)
+#else
+printf_monitor(va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char buf[PBUFSIZ];
+  int i;
+
+#ifdef ANSI_PROTOTYPES
+  va_start(args, pattern);
+#else
+  char *pattern;
+  va_start(args);
+  pattern = va_arg(args, char *);
+#endif
+
+  vsprintf(buf, pattern, args);
+
+  debuglogs (1, "printf_monitor(), Sending: \"%s\".", buf);
+
+  if (strlen(buf) > PBUFSIZ)
+    error ("printf_monitor(): string too long");
+  if (SERIAL_WRITE(array_desc, buf, strlen(buf)))
+    fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+}
+/*
+ * write_monitor -- send raw data to monitor.
+ */
+static void
+write_monitor(data, len)
+     char data[];
+     int len;
+{
+  if (SERIAL_WRITE(array_desc, data, len))
+    fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+ 
+  *(data + len+1) = '\0';
+  debuglogs (1, "write_monitor(), Sending: \"%s\".", data);
+
+}
+
+/*
+ * debuglogs -- deal with debugging info to multiple sources. This takes
+ *	two real args, the first one is the level to be compared against 
+ *	the sr_get_debug() value, the second arg is a printf buffer and args
+ *	to be formatted and printed. A CR is added after each string is printed.
+ */
+static void
+#ifdef ANSI_PROTOTYPES
+debuglogs(int level, char *pattern, ...)
+#else
+debuglogs(va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char *p;
+  unsigned char buf[PBUFSIZ];
+  char newbuf[PBUFSIZ];
+  int i;
+
+#ifdef ANSI_PROTOTYPES
+  va_start(args, pattern);
+#else
+  char *pattern;
+  int level;
+  va_start(args);
+  level = va_arg(args, int);			/* get the debug level */
+  pattern = va_arg(args, char *);		/* get the printf style pattern */
+#endif
+
+  if ((level <0) || (level > 100)) {
+    error ("Bad argument passed to debuglogs(), needs debug level");
+    return;
+  }
+      
+  vsprintf(buf, pattern, args);			/* format the string */
+  
+  /* convert some characters so it'll look right in the log */
+  p = newbuf;
+  for (i = 0 ; buf[i] != '\0'; i++) {
+    if (i > PBUFSIZ)
+      error ("Debug message too long");
+    switch (buf[i]) {
+    case '\n':					/* newlines */
+      *p++ = '\\';
+      *p++ = 'n';
+      continue;
+    case '\r':					/* carriage returns */
+      *p++ = '\\';
+      *p++ = 'r';
+      continue;
+    case '\033':				/* escape */
+      *p++ = '\\';
+      *p++ = 'e';
+      continue;
+    case '\t':					/* tab */
+      *p++ = '\\';
+      *p++ = 't';
+      continue;
+    case '\b':					/* backspace */
+      *p++ = '\\';
+      *p++ = 'b';
+      continue;
+    default:					/* no change */
+      *p++ = buf[i];
+    }
+
+    if (buf[i] < 26) {				/* modify control characters */
+      *p++ = '^';
+      *p++ = buf[i] + 'A';
+      continue;
+    }
+     if (buf[i] >= 128) {			/* modify control characters */
+      *p++ = '!';
+      *p++ = buf[i] + 'A';
+      continue;
+    }
+ }
+  *p = '\0';					/* terminate the string */
+
+  if (sr_get_debug() > level)
+    printf_unfiltered ("%s\n", newbuf);
+
+#ifdef LOG_FILE					/* write to the monitor log */
+  if (log_file != 0x0) {
+    fputs (newbuf, log_file);
+    fputc ('\n', log_file);
+    fflush (log_file);
+  }
+#endif
+}
+
+/* readchar -- read a character from the remote system, doing all the fancy
+ *	timeout stuff.
+ */
+static int
+readchar(timeout)
+     int timeout;
+{
+  int c;
+
+  c = SERIAL_READCHAR(array_desc, abs(timeout));
+
+  if (sr_get_debug() > 5) {
+    putchar(c & 0x7f);
+    debuglogs (5, "readchar: timeout = %d\n", timeout);
+  }
+
+#ifdef LOG_FILE
+  if (isascii (c))
+    putc(c & 0x7f, log_file);
+#endif
+
+  if (c >= 0)
+    return c & 0x7f;
+
+  if (c == SERIAL_TIMEOUT) {
+    if (timeout <= 0)
+      return c;		/* Polls shouldn't generate timeout errors */
+    error("Timeout reading from remote system.");
+#ifdef LOG_FILE
+      fputs ("ERROR: Timeout reading from remote system", log_file);
+#endif
+  }
+  perror_with_name("readchar");
+}
+
+/* 
+ * expect --  scan input from the remote system, until STRING is found.
+ *	If DISCARD is non-zero, then discard non-matching input, else print
+ *	it out. Let the user break out immediately.
+ */
+static void
+expect (string, discard)
+     char *string;
+     int discard;
+{
+  char *p = string;
+  int c;
+
+
+  debuglogs (1, "Expecting \"%s\".", string);
+
+  immediate_quit = 1;
+  while (1) {
+    c = readchar(timeout);
+    if (!isascii (c))
+      continue;
+    if (c == *p++) {
+      if (*p == '\0') {
+	immediate_quit = 0;
+	debuglogs (4, "Matched");
+	return;
+      }
+    } else {
+      if (!discard) {
+	fputc_unfiltered (c, gdb_stdout);
+      }
+      p = string;
+    }
+  }
+}
+
+/* Keep discarding input until we see the MONITOR array_cmds->prompt.
+
+   The convention for dealing with the expect_prompt is that you
+   o give your command
+   o *then* wait for the expect_prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  array_resume does not
+   wait for the expect_prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a array_wait which does wait for the expect_prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt(discard)
+     int discard;
+{
+  expect (ARRAY_PROMPT, discard);
+}
+
+/*
+ * junk -- ignore junk characters. Returns a 1 if junk, 0 otherwise
+ */
+static int
+junk(ch)
+     char ch;
+{
+  switch (ch) {
+  case '\0':
+  case ' ':
+  case '-':
+  case '\t':
+  case '\r':
+  case '\n':
+    if (sr_get_debug() > 5)
+      debuglogs (5, "Ignoring \'%c\'.", ch);
+    return 1;
+  default:
+    if (sr_get_debug() > 5)
+      debuglogs (5, "Accepting \'%c\'.", ch);
+    return 0;
+  }
+}
+
+/* 
+ *  get_hex_digit -- Get a hex digit from the remote system & return its value.
+ *		If ignore is nonzero, ignore spaces, newline & tabs.
+ */
+static int
+get_hex_digit(ignore)
+     int ignore;
+{
+  static int ch;
+  while (1) {
+    ch = readchar(timeout);
+    if (junk(ch))
+      continue;
+    if (sr_get_debug() > 4) {
+      debuglogs (4, "get_hex_digit() got a 0x%x(%c)", ch, ch);
+    } else {
+#ifdef LOG_FILE					/* write to the monitor log */
+      if (log_file != 0x0) {
+	fputs ("get_hex_digit() got a 0x", log_file);
+	fputc (ch, log_file);
+	fputc ('\n', log_file);
+	fflush (log_file);
+      }
+#endif
+    }
+
+    if (ch >= '0' && ch <= '9')
+      return ch - '0';
+    else if (ch >= 'A' && ch <= 'F')
+      return ch - 'A' + 10;
+    else if (ch >= 'a' && ch <= 'f')
+      return ch - 'a' + 10;
+    else if (ch == ' ' && ignore)
+      ;
+    else {
+     expect_prompt(1);
+      debuglogs (4, "Invalid hex digit from remote system. (0x%x)", ch);
+      error("Invalid hex digit from remote system. (0x%x)", ch);
+    }
+  }
+}
+
+/* get_hex_byte -- Get a byte from monitor and put it in *BYT. 
+ *	Accept any number leading spaces.
+ */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  debuglogs (4, "get_hex_byte() -- Read first nibble 0x%x", val);
+ 
+  val |= get_hex_digit (0);
+  debuglogs (4, "get_hex_byte() -- Read second nibble 0x%x", val);
+  *byt = val;
+  
+  debuglogs (4, "get_hex_byte() -- Read a 0x%x", val);
+}
+
+/* 
+ * get_hex_word --  Get N 32-bit words from remote, each preceded by a space,
+ *	and put them in registers starting at REGNO.
+ */
+static int
+get_hex_word ()
+{
+  long val, newval;
+  int i;
+
+  val = 0;
+
+#if 0
+  if (HOST_BYTE_ORDER == BIG_ENDIAN) {
+#endif
+    for (i = 0; i < 8; i++)
+      val = (val << 4) + get_hex_digit (i == 0);
+#if 0
+  } else {
+    for (i = 7; i >= 0; i--)
+      val = (val << 4) + get_hex_digit (i == 0);
+  }
+#endif
+
+  debuglogs (4, "get_hex_word() got a 0x%x for a %s host.", val, (HOST_BYTE_ORDER == BIG_ENDIAN) ? "big endian" : "little endian");
+
+  return val;
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+array_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error("Can't pass arguments to remote MONITOR process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+/* The "process" (board) is already stopped awaiting our commands, and
+   the program is already downloaded.  We just set its PC and go.  */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+
+  /* Let 'er rip... */
+  proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/*
+ * array_open -- open a connection to a remote debugger.
+ *	NAME is the filename used for communication.
+ */
+static int baudrate = 9600;
+static char dev_name[100];
+
+static void
+array_open(args, name, from_tty)
+     char *args;
+     char *name;
+     int from_tty;
+{
+  char packet[PBUFSIZ];
+
+  if (args == NULL)
+    error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+
+/*  if (is_open) */
+    array_close(0);
+
+  target_preopen (from_tty);
+  unpush_target (&array_ops);
+
+  tmp_mips_processor_type = "lsi33k";	/* change the default from r3051 */
+  mips_set_processor_type_command ("lsi33k", 0);
+
+  strcpy(dev_name, args);
+  array_desc = SERIAL_OPEN(dev_name);
+
+  if (array_desc == NULL)
+    perror_with_name(dev_name);
+
+  if (baud_rate != -1) {
+    if (SERIAL_SETBAUDRATE (array_desc, baud_rate)) {
+      SERIAL_CLOSE (array_desc);
+      perror_with_name (name);
+    }
+  }
+  
+  SERIAL_RAW(array_desc);
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+  fprintf (log_file, "GDB %s (%s", version);
+  fprintf (log_file, " --target %s)\n", array_ops.to_shortname);
+  fprintf (log_file, "Remote target %s connected to %s\n\n", array_ops.to_shortname, dev_name);
+#endif
+
+  /* see if the target is alive. For a ROM monitor, we can just try to force the
+     expect_prompt to print a few times. For the GDB remote protocol, the application
+     being debugged is sitting at a breakpoint and waiting for GDB to initialize
+     the connection. We force it to give us an empty packet to see if it's alive.
+     */
+    debuglogs (3, "Trying to ACK the target's debug stub");
+    /* unless your are on the new hardware, the old board won't initialize
+       because the '@' doesn't flush output like it does on the new ROMS.
+     */
+    printf_monitor ("@");	/* ask for the last signal */
+    expect_prompt(1);		/* See if we get a expect_prompt */
+#ifdef TEST_ARRAY		/* skip packet for testing */
+    make_gdb_packet (packet, "?");	/* ask for a bogus packet */
+    if (array_send_packet (packet) == 0)
+      error ("Couldn't transmit packet\n");
+    printf_monitor ("@\n");	/* force it to flush stdout */
+   expect_prompt(1);		/* See if we get a expect_prompt */
+#endif
+  push_target (&array_ops);
+  if (from_tty)
+    printf("Remote target %s connected to %s\n", array_ops.to_shortname, dev_name);
+}
+
+/*
+ * array_close -- Close out all files and local state before this
+ *	target loses control.
+ */
+
+static void
+array_close (quitting)
+     int quitting;
+{
+  SERIAL_CLOSE(array_desc);
+  array_desc = NULL;
+
+  debuglogs (1, "array_close (quitting=%d)", quitting);
+
+#if defined (LOG_FILE)
+  if (log_file) {
+    if (ferror(log_file))
+      printf_filtered ("Error writing log file.\n");
+    if (fclose(log_file) != 0)
+      printf_filtered ("Error closing log file.\n");
+  }
+#endif
+}
+
+/* 
+ * array_detach -- terminate the open connection to the remote
+ *	debugger. Use this when you want to detach and do something
+ *	else with your gdb.
+ */
+static void
+array_detach (from_tty)
+     int from_tty;
+{
+
+  debuglogs (1, "array_detach ()");
+
+  pop_target();		/* calls array_close to do the real work */
+  if (from_tty)
+    printf ("Ending remote %s debugging\n", target_shortname);
+}
+
+/*
+ * array_attach -- attach GDB to the target.
+ */
+static void
+array_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (from_tty)
+    printf ("Starting remote %s debugging\n", target_shortname);
+ 
+  debuglogs (1, "array_attach (args=%s)", args);
+  
+  printf_monitor ("go %x\n");
+  /* swallow the echo.  */
+  expect ("go %x\n", 1);
+}
+  
+/*
+ * array_resume -- Tell the remote machine to resume.
+ */
+static void
+array_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  debuglogs (1, "array_resume (step=%d, sig=%d)", step, sig);
+
+  if (step) {
+    printf_monitor ("s\n");
+  } else {
+    printf_monitor ("go\n");
+  }
+}
+
+#define TMPBUFSIZ 5
+
+/*
+ * array_wait -- Wait until the remote machine stops, then return,
+ *          storing status in status just as `wait' would.
+ */
+static int
+array_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int old_timeout = timeout;
+  int result, i;
+  char c;
+  serial_t tty_desc;
+  serial_ttystate ttystate;
+
+  debuglogs(1, "array_wait (), printing extraneous text.");
+  
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+ 
+#if !defined(__GO32__) && !defined(__MSDOS__) && !defined(_WIN32)
+  tty_desc = SERIAL_FDOPEN (0);
+  ttystate = SERIAL_GET_TTY_STATE (tty_desc);
+  SERIAL_RAW (tty_desc);
+
+  i = 0;
+  /* poll on the serial port and the keyboard. */
+  while (1) {
+    c = readchar(timeout);
+    if (c > 0) {
+      if (c == *(ARRAY_PROMPT + i)) {
+	if (++i >= strlen (ARRAY_PROMPT)) { /* matched the prompt */
+	  debuglogs (4, "array_wait(), got the expect_prompt.");
+	  break;
+	}
+      } else {		/* not the prompt */
+	i = 0;
+      }
+      fputc_unfiltered (c, gdb_stdout);
+      gdb_flush (gdb_stdout);
+    }
+    c = SERIAL_READCHAR(tty_desc, timeout);
+    if (c > 0) {
+      SERIAL_WRITE(array_desc, &c, 1);
+      /* do this so it looks like there's keyboard echo */
+      if (c == 3)		/* exit on Control-C */
+	break;
+#if 0
+      fputc_unfiltered (c, gdb_stdout);
+      gdb_flush (gdb_stdout);
+#endif
+    }
+  }
+  SERIAL_SET_TTY_STATE (tty_desc, ttystate);
+#else
+  expect_prompt(1);
+  debuglogs (4, "array_wait(), got the expect_prompt.");
+#endif
+
+  status->kind = TARGET_WAITKIND_STOPPED;
+  status->value.sig = TARGET_SIGNAL_TRAP;
+
+  timeout = old_timeout;
+
+  return 0;
+}
+
+/*
+ * array_fetch_registers -- read the remote registers into the
+ *	block regs.
+ */
+static void
+array_fetch_registers (ignored)
+     int ignored;
+{
+  int regno, i;
+  char *p;
+  unsigned char packet[PBUFSIZ];
+  char regs[REGISTER_BYTES];
+
+  debuglogs (1, "array_fetch_registers (ignored=%d)\n", ignored);
+
+  memset (packet, 0, PBUFSIZ);
+  /* Unimplemented registers read as all bits zero.  */
+  memset (regs, 0, REGISTER_BYTES);
+  make_gdb_packet (packet, "g");
+  if (array_send_packet (packet) == 0)
+    error ("Couldn't transmit packet\n");
+  if (array_get_packet (packet) == 0)
+    error ("Couldn't receive packet\n");  
+  /* FIXME: read bytes from packet */
+  debuglogs (4, "array_fetch_registers: Got a \"%s\" back\n", packet);
+  for (regno = 0; regno <= PC_REGNUM+4; regno++) {
+    /* supply register stores in target byte order, so swap here */
+    /* FIXME: convert from ASCII hex to raw bytes */
+    i = ascii2hexword (packet + (regno * 8));
+    debuglogs (5, "Adding register %d = %x\n", regno, i);
+    SWAP_TARGET_AND_HOST (&i, 4);
+    supply_register (regno, (char *)&i);
+  }
+}
+
+/* 
+ * This is unused by targets like this one that use a
+ * protocol based on GDB's remote protocol.
+ */
+static void
+array_fetch_register (ignored)
+     int ignored;
+{
+  array_fetch_registers ();
+}
+
+/*
+ * Get all the registers from the targets. They come back in a large array.
+ */
+static void
+array_store_registers (ignored)
+     int ignored;
+{
+  int regno;
+  unsigned long i;
+  char packet[PBUFSIZ];
+  char buf[PBUFSIZ];
+  char num[9];
+  
+  debuglogs (1, "array_store_registers()");
+
+  memset (packet, 0, PBUFSIZ);
+  memset (buf, 0, PBUFSIZ);
+  buf[0] = 'G';
+
+  /* Unimplemented registers read as all bits zero.  */
+  /* FIXME: read bytes from packet */
+  for (regno = 0; regno < 41; regno++) { /* FIXME */
+    /* supply register stores in target byte order, so swap here */
+    /* FIXME: convert from ASCII hex to raw bytes */
+    i = (unsigned long)read_register (regno);
+    hexword2ascii (num, i);
+    strcpy (buf+(regno * 8)+1, num);
+  }
+  *(buf + (regno * 8) + 2) = 0;
+  make_gdb_packet (packet, buf);
+  if (array_send_packet (packet) == 0)
+    error ("Couldn't transmit packet\n");
+  if (array_get_packet (packet) == 0)
+    error ("Couldn't receive packet\n");  
+  
+  registers_changed ();
+}
+
+/* 
+ * This is unused by targets like this one that use a
+ * protocol based on GDB's remote protocol.
+ */
+static void
+array_store_register (ignored)
+     int ignored;
+{
+  array_store_registers ();
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+array_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+array_files_info ()
+{
+  printf ("\tAttached to %s at %d baud.\n",
+	  dev_name, baudrate);
+}
+
+/*
+ * array_write_inferior_memory -- Copy LEN bytes of data from debugger
+ *	memory at MYADDR to inferior's memory at MEMADDR.  Returns length moved.
+ */
+static int
+array_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  unsigned long i;
+  int j;
+  char packet[PBUFSIZ];
+  char buf[PBUFSIZ];
+  char num[9];
+  char *p;
+  
+  debuglogs (1, "array_write_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
+  memset (buf, '\0', PBUFSIZ);		/* this also sets the string terminator */
+  p = buf;
+
+  *p++ = 'M';				/* The command to write memory */
+  hexword2ascii (num, memaddr);	/* convert the address */
+  strcpy (p, num);			/* copy the address */
+  p += 8;
+  *p++ = ',';				/* add comma delimeter */
+  hexword2ascii (num, len);		/* Get the length as a 4 digit number */
+  *p++ = num[4];
+  *p++ = num[5];
+  *p++ = num[6];
+  *p++ = num[7];
+  *p++ = ':';				/* add the colon delimeter */
+  for (j = 0; j < len; j++) {		/* copy the data in after converting it */
+    *p++ = tohex ((myaddr[j] >> 4) & 0xf);
+    *p++ = tohex  (myaddr[j] & 0xf);
+  }
+  
+  make_gdb_packet (packet, buf);
+  if (array_send_packet (packet) == 0)
+    error ("Couldn't transmit packet\n");
+  if (array_get_packet (packet) == 0)
+    error ("Couldn't receive packet\n");  
+
+  return len;
+}
+
+/*
+ * array_read_inferior_memory -- read LEN bytes from inferior memory
+ *	at MEMADDR.  Put the result at debugger address MYADDR.  Returns
+ *	length moved.
+ */
+static int
+array_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int j;
+  char buf[20];
+  char packet[PBUFSIZ];
+  int count;			/* Number of bytes read so far.  */
+  unsigned long startaddr;	/* Starting address of this pass.  */
+  int len_this_pass;		/* Number of bytes to read in this pass.  */
+
+  debuglogs (1, "array_read_inferior_memory (memaddr=0x%x, myaddr=0x%x, len=%d)", memaddr, myaddr, len);
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     array_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len To memaddr and gets 0.  */
+  /* However, something like
+     array_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+  if (((memaddr - 1) + len) < memaddr) {
+    errno = EIO;
+    return 0;
+  }
+  
+  for (count = 0, startaddr = memaddr; count < len; startaddr += len_this_pass)
+    {
+      /* Try to align to 16 byte boundry (why?) */
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	{
+	  len_this_pass -= startaddr % 16;
+	}
+      /* Only transfer bytes we need */
+      if (len_this_pass > (len - count))
+	{
+	  len_this_pass = (len - count);
+	}
+      /* Fetch the bytes */
+      debuglogs (3, "read %d bytes from inferior address %x", len_this_pass,
+		 startaddr);
+      sprintf (buf, "m%08x,%04x", startaddr, len_this_pass);
+      make_gdb_packet (packet, buf);
+      if (array_send_packet (packet) == 0)
+	{
+	  error ("Couldn't transmit packet\n");
+	}
+      if (array_get_packet (packet) == 0)
+	{
+	  error ("Couldn't receive packet\n");  
+	}
+      if (*packet == 0)
+	{
+	  error ("Got no data in the GDB packet\n");
+	}
+      /* Pick packet apart and xfer bytes to myaddr */
+      debuglogs (4, "array_read_inferior_memory: Got a \"%s\" back\n", packet);
+      for (j = 0; j < len_this_pass ; j++)
+	{
+	  /* extract the byte values */
+	  myaddr[count++] = from_hex (*(packet+(j*2))) * 16 + from_hex (*(packet+(j*2)+1));
+	  debuglogs (5, "myaddr[%d] set to %x\n", count-1, myaddr[count-1]);
+	}
+    }
+  return (count);
+}
+
+/* FIXME-someday!  merge these two.  */
+static int
+array_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  if (write)
+    return array_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return array_read_inferior_memory (memaddr, myaddr, len);
+}
+
+static void
+array_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+array_mourn_inferior ()
+{
+  remove_breakpoints ();
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define MAX_ARRAY_BREAKPOINTS 16
+
+static CORE_ADDR breakaddr[MAX_ARRAY_BREAKPOINTS] = {0};
+
+/*
+ * array_insert_breakpoint -- add a breakpoint
+ */
+static int
+array_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+  int bp_size = 0;
+  CORE_ADDR bp_addr = addr;
+
+  debuglogs (1, "array_insert_breakpoint() addr = 0x%x", addr);
+  BREAKPOINT_FROM_PC (&bp_addr, &bp_size);
+
+  for (i = 0; i <= MAX_ARRAY_BREAKPOINTS; i++) {
+    if (breakaddr[i] == 0) {
+      breakaddr[i] = addr;
+      if (sr_get_debug() > 4)
+	printf ("Breakpoint at %x\n", addr);
+      array_read_inferior_memory (bp_addr, shadow, bp_size);
+      printf_monitor("b 0x%x\n", addr);
+      expect_prompt(1);
+      return 0;
+    }
+  }
+
+  fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
+  return 1;
+}
+
+/*
+ * _remove_breakpoint -- Tell the monitor to remove a breakpoint
+ */
+static int
+array_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+  debuglogs (1, "array_remove_breakpoint() addr = 0x%x", addr);
+
+  for (i = 0; i < MAX_ARRAY_BREAKPOINTS; i++) {
+    if (breakaddr[i] == addr) {
+      breakaddr[i] = 0;
+      /* some monitors remove breakpoints based on the address */
+      printf_monitor("bd %x\n", i);
+      expect_prompt(1);
+      return 0;
+    }
+  }
+  fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+static void
+array_stop ()
+{
+  debuglogs (1, "array_stop()");
+  printf_monitor("\003");
+ expect_prompt(1);
+}
+
+/* 
+ * array_command -- put a command string, in args, out to MONITOR.
+ *	Output from MONITOR is placed on the users terminal until the
+ *	expect_prompt is seen. FIXME
+ */
+static void
+monitor_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  debuglogs (1, "monitor_command (args=%s)", args);
+
+  if (array_desc == NULL)
+    error("monitor target not open.");
+
+  if (!args)
+    error("Missing command.");
+	
+  printf_monitor ("%s\n", args);
+  expect_prompt(0);
+}
+
+/*
+ * make_gdb_packet -- make a GDB packet. The data is always ASCII.
+ *	 A debug packet whose contents are <data>
+ *	 is encapsulated for transmission in the form:
+ *
+ *		$ <data> # CSUM1 CSUM2
+ *
+ *       <data> must be ASCII alphanumeric and cannot include characters
+ *       '$' or '#'.  If <data> starts with two characters followed by
+ *       ':', then the existing stubs interpret this as a sequence number.
+ *
+ *       CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
+ *       checksum of <data>, the most significant nibble is sent first.
+ *       the hex digits 0-9,a-f are used.
+ *
+ */
+static void
+make_gdb_packet (buf, data)
+     char *buf, *data;
+{
+  int i;
+  unsigned char csum = 0;
+  int cnt;
+  char *p;
+
+  debuglogs (3, "make_gdb_packet(%s)\n", data);
+  cnt  = strlen (data);
+  if (cnt > PBUFSIZ)
+    error ("make_gdb_packet(): to much data\n");
+
+  /* start with the packet header */
+  p = buf;
+  *p++ = '$';
+
+  /* calculate the checksum */
+  for (i = 0; i < cnt; i++) {
+    csum += data[i];
+    *p++ = data[i];
+  }
+
+  /* terminate the data with a '#' */
+  *p++ = '#';
+  
+  /* add the checksum as two ascii digits */
+  *p++ = tohex ((csum >> 4) & 0xf);
+  *p++ = tohex (csum & 0xf);
+  *p  = 0x0;			/* Null terminator on string */
+}
+
+/*
+ * array_send_packet -- send a GDB packet to the target with error handling. We
+ *		get a '+' (ACK) back if the packet is received and the checksum
+ *		matches. Otherwise a '-' (NAK) is returned. It returns a 1 for a
+ *		successful transmition, or a 0 for a failure.
+ */
+static int
+array_send_packet (packet)
+     char *packet;
+{
+  int c, retries, i;
+  char junk[PBUFSIZ];
+
+  retries = 0;
+
+#if 0
+  /* scan the packet to make sure it only contains valid characters.
+     this may sound silly, but sometimes a garbled packet will hang
+     the target board. We scan the whole thing, then print the error
+     message.
+     */
+  for (i = 0; i < strlen(packet); i++) {
+    debuglogs (5, "array_send_packet(): Scanning \'%c\'\n", packet[i]);
+    /* legit hex numbers or command */
+    if ((isxdigit(packet[i])) || (isalpha(packet[i])))
+      continue;
+    switch (packet[i]) {
+    case '+':			/* ACK */
+    case '-':			/* NAK */
+    case '#':			/* end of packet */
+    case '$':			/* start of packet */
+      continue;
+    default:			/* bogus character */
+      retries++;
+      debuglogs (4, "array_send_packet(): Found a non-ascii digit \'%c\' in the packet.\n", packet[i]);
+    }
+  }
+#endif  
+
+  if (retries > 0)
+    error ("Can't send packet, found %d non-ascii characters", retries);
+
+  /* ok, try to send the packet */
+  retries = 0;
+  while (retries++ <= 10) {
+    printf_monitor ("%s", packet);
+    
+    /* read until either a timeout occurs (-2) or '+' is read */
+    while (retries <= 10) {
+      c = readchar (-timeout);
+      debuglogs (3, "Reading a GDB protocol packet... Got a '%c'\n", c);
+      switch (c) {
+      case '+':
+	debuglogs (3, "Got Ack\n");
+	return 1;
+      case SERIAL_TIMEOUT:
+	debuglogs (3, "Timed out reading serial port\n");
+	printf_monitor("@");		/* resync with the monitor */
+       expect_prompt(1);		/* See if we get a expect_prompt */   
+	break;            /* Retransmit buffer */
+      case '-':
+	debuglogs (3, "Got NAK\n");
+	printf_monitor("@");		/* resync with the monitor */
+       expect_prompt(1);		/* See if we get a expect_prompt */   
+	break;
+      case '$':
+	/* it's probably an old response, or the echo of our command.
+	 * just gobble up the packet and ignore it.
+	 */
+	debuglogs (3, "Got a junk packet\n");
+	i = 0;
+	do {
+	  c = readchar (timeout);
+	  junk[i++] = c;
+	} while (c != '#');
+	c = readchar (timeout);
+	junk[i++] = c;
+	c = readchar (timeout);
+	junk[i++] = c;
+	junk[i++] = '\0';
+	debuglogs (3, "Reading a junk packet, got a \"%s\"\n", junk);
+	continue;               /* Now, go look for next packet */
+      default:
+	continue;
+      }
+      retries++;
+      debuglogs (3, "Retransmitting packet \"%s\"\n", packet);
+      break;                /* Here to retransmit */
+    }
+  } /* outer while */
+  return 0;
+}
+
+/*
+ * array_get_packet -- get a GDB packet from the target. Basically we read till we
+ *		see a '#', then check the checksum. It returns a 1 if it's gotten a
+ *		packet, or a 0 it the packet wasn't transmitted correctly.
+ */
+static int
+array_get_packet (packet)
+     char *packet;
+{
+  int c;
+  int retries;
+  unsigned char csum;
+  unsigned char pktcsum;
+  char *bp;
+
+  csum = 0;
+  bp = packet;
+
+  memset (packet, 1, PBUFSIZ);
+  retries = 0;
+  while (retries <= 10) {
+    do {
+      c = readchar (timeout);
+      if (c == SERIAL_TIMEOUT) {
+	debuglogs (3, "array_get_packet: got time out from serial port.\n");
+      }
+      debuglogs (3, "Waiting for a '$', got a %c\n", c);
+    } while (c != '$');
+    
+    retries = 0;
+    while (retries <= 10) {
+      c = readchar (timeout);
+      debuglogs (3, "array_get_packet: got a '%c'\n", c);
+      switch (c) {
+      case SERIAL_TIMEOUT:
+	debuglogs (3, "Timeout in mid-packet, retrying\n");
+	return 0;
+      case '$':
+	debuglogs (3, "Saw new packet start in middle of old one\n");
+	return 0;             /* Start a new packet, count retries */
+      case '#':	
+	*bp = '\0';
+	pktcsum = from_hex (readchar (timeout)) << 4;
+	pktcsum |= from_hex (readchar (timeout));
+	if (csum == 0)
+	  debuglogs (3, "\nGDB packet checksum zero, must be a bogus packet\n");
+	if (csum == pktcsum) {
+	  debuglogs (3, "\nGDB packet checksum correct, packet data is \"%s\",\n", packet);
+	  printf_monitor ("@");
+	 expect_prompt (1);
+	  return 1;
+	}
+	debuglogs (3, "Bad checksum, sentsum=0x%x, csum=0x%x\n", pktcsum, csum);
+	return 0;
+      case '*':               /* Run length encoding */
+	debuglogs (5, "Run length encoding in packet\n");
+	csum += c;
+	c = readchar (timeout);
+	csum += c;
+	c = c - ' ' + 3;      /* Compute repeat count */
+	
+	if (c > 0 && c < 255 && bp + c - 1 < packet + PBUFSIZ - 1) {
+	  memset (bp, *(bp - 1), c);
+	  bp += c;
+	  continue;
+	}
+	*bp = '\0';
+	printf_filtered ("Repeat count %d too large for buffer.\n", c);
+	return 0;
+	
+      default:
+	if ((!isxdigit(c)) && (!ispunct(c)))
+	  debuglogs (4, "Got a non-ascii digit \'%c\'.\\n", c);
+	if (bp < packet + PBUFSIZ - 1) {
+	  *bp++ = c;
+	  csum += c;
+	  continue;
+	}
+	
+	*bp = '\0';
+	puts_filtered ("Remote packet too long.\n");
+	return 0;
+      }
+    }
+  }
+  return 0; /* exceeded retries */
+}
+
+/*
+ * ascii2hexword -- convert an ascii number represented by 8 digits to a hex value.
+ */
+static unsigned long
+ascii2hexword (mem)
+     unsigned char *mem;
+{
+  unsigned long val;
+  int i;
+  char buf[9];
+
+  val = 0;
+  for (i = 0; i < 8; i++) {
+    val <<= 4;
+    if (mem[i] >= 'A' && mem[i] <= 'F')
+      val = val + mem[i] - 'A' + 10;      
+    if (mem[i] >= 'a' && mem[i] <= 'f')
+      val = val + mem[i] - 'a' + 10;
+    if (mem[i] >= '0' && mem[i] <= '9')
+      val = val + mem[i] - '0';
+    buf[i] = mem[i];
+  }
+  buf[8] = '\0';
+  debuglogs (4, "ascii2hexword() got a 0x%x from %s(%x).\n", val, buf, mem);
+  return val;
+}
+
+/*
+ * ascii2hexword -- convert a hex value to an ascii number represented by 8
+ *	digits.
+ */
+static void
+hexword2ascii (mem, num)
+     unsigned char *mem;
+     unsigned long num;
+{
+  int i;
+  unsigned char ch;
+  
+  debuglogs (4, "hexword2ascii() converting %x ", num);
+  for (i = 7; i >= 0; i--) {    
+    mem[i] = tohex ((num >> 4) & 0xf);
+    mem[i] = tohex (num & 0xf);
+    num = num >> 4;
+  }
+  mem[8] = '\0';
+  debuglogs (4, "\tto a %s", mem);
+}
+
+/* Convert hex digit A to a number.  */
+static int
+from_hex (a)
+     int a;
+{  
+  if (a == 0)
+    return 0;
+
+  debuglogs (4, "from_hex got a 0x%x(%c)\n",a,a);
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  if (a >= 'A' && a <= 'F')
+    return a - 'A' + 10;
+  else {
+    error ("Reply contains invalid hex digit 0x%x", a);
+  }
+}
+
+/* Convert number NIB to a hex digit.  */
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    return '0'+nib;
+  else
+    return 'a'+nib-10;
+}
+
+/*
+ * _initialize_remote_monitors -- setup a few addtitional commands that
+ *		are usually only used by monitors.
+ */
+void
+_initialize_remote_monitors ()
+{
+  /* generic monitor command */
+  add_com ("monitor", class_obscure, monitor_command,
+	   "Send a command to the debug monitor."); 
+
+}
+
+/*
+ * _initialize_array -- do any special init stuff for the target.
+ */
+void
+_initialize_array ()
+{
+  init_array_ops() ;
+  add_target (&array_ops);
+}
diff --git a/gdb/remote-bug.c b/gdb/remote-bug.c
new file mode 100644
index 0000000..2efd710
--- /dev/null
+++ b/gdb/remote-bug.c
@@ -0,0 +1,1099 @@
+/* Remote debugging interface for Motorola's MVME187BUG monitor, an embedded
+   monitor for the m88k.
+
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by K. Richard Pixley.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "wait.h"
+
+#include "gdb_string.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <errno.h>
+
+#include "terminal.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+
+#include "remote-utils.h"
+
+
+extern int sleep();
+
+/* External data declarations */
+extern int stop_soon_quietly;	/* for wait_for_inferior */
+
+/* Forward data declarations */
+extern struct target_ops bug_ops;	/* Forward declaration */
+
+/* Forward function declarations */
+static int bug_clear_breakpoints PARAMS((void));
+
+static int bug_read_memory PARAMS((CORE_ADDR memaddr,
+					    unsigned char *myaddr,
+					    int len));
+
+static int bug_write_memory PARAMS((CORE_ADDR memaddr,
+					     unsigned char *myaddr,
+					     int len));
+
+/* This variable is somewhat arbitrary.  It's here so that it can be
+   set from within a running gdb.  */
+
+static int srec_max_retries = 3;
+
+/* Each S-record download to the target consists of an S0 header
+   record, some number of S3 data records, and one S7 termination
+   record.  I call this download a "frame".  Srec_frame says how many
+   bytes will be represented in each frame.  */
+
+#define SREC_SIZE 160
+static int srec_frame = SREC_SIZE;
+
+/* This variable determines how many bytes will be represented in each
+   S3 s-record.  */
+
+static int srec_bytes = 40;
+
+/* At one point it appeared to me as though the bug monitor could not
+   really be expected to receive two sequential characters at 9600
+   baud reliably.  Echo-pacing is an attempt to force data across the
+   line even in this condition.  Specifically, in echo-pace mode, each
+   character is sent one at a time and we look for the echo before
+   sending the next.  This is excruciatingly slow.  */
+
+static int srec_echo_pace = 0;
+
+/* How long to wait after an srec for a possible error message.
+   Similar to the above, I tried sleeping after sending each S3 record
+   in hopes that I might actually see error messages from the bug
+   monitor.  This might actually work if we were to use sleep
+   intervals smaller than 1 second.  */
+
+static int srec_sleep = 0;
+
+/* Every srec_noise records, flub the checksum.  This is a debugging
+   feature.  Set the variable to something other than 1 in order to
+   inject *deliberate* checksum errors.  One might do this if one
+   wanted to test error handling and recovery.  */
+
+static int srec_noise = 0;
+
+/* Called when SIGALRM signal sent due to alarm() timeout.  */
+
+/* Number of SIGTRAPs we need to simulate.  That is, the next
+   NEED_ARTIFICIAL_TRAP calls to bug_wait should just return
+   SIGTRAP without actually waiting for anything.  */
+
+static int need_artificial_trap = 0;
+
+/*
+ * Download a file specified in 'args', to the bug.
+ */
+
+static void
+bug_load (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  bfd *abfd;
+  asection *s;
+  char buffer[1024];
+
+  sr_check_open ();
+
+  dcache_flush (gr_get_dcache());
+  inferior_pid = 0;
+  abfd = bfd_openr (args, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", args);
+      return;
+    }
+
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+
+  s = abfd->sections;
+  while (s != (asection *) NULL)
+    {
+      srec_frame = SREC_SIZE;
+      if (s->flags & SEC_LOAD)
+	{
+	  int i;
+
+	  char *buffer = xmalloc (srec_frame);
+
+	  printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma, s->vma + s->_raw_size);
+	  gdb_flush (gdb_stdout);
+	  for (i = 0; i < s->_raw_size; i += srec_frame)
+	    {
+	      if (srec_frame > s->_raw_size - i)
+		srec_frame = s->_raw_size - i;
+
+	      bfd_get_section_contents (abfd, s, buffer, i, srec_frame);
+	      bug_write_memory (s->vma + i, buffer, srec_frame);
+	      printf_filtered ("*");
+	      gdb_flush (gdb_stdout);
+	    }
+	  printf_filtered ("\n");
+	  free (buffer);
+	}
+      s = s->next;
+    }
+  sprintf (buffer, "rs ip %lx", (unsigned long) abfd->start_address);
+  sr_write_cr (buffer);
+  gr_expect_prompt ();
+}
+
+#if 0
+static char *
+get_word (p)
+     char **p;
+{
+  char *s = *p;
+  char *word;
+  char *copy;
+  size_t len;
+
+  while (isspace (*s))
+    s++;
+
+  word = s;
+
+  len = 0;
+
+  while (*s && !isspace (*s))
+    {
+      s++;
+      len++;
+
+    }
+  copy = xmalloc (len + 1);
+  memcpy (copy, word, len);
+  copy[len] = 0;
+  *p = s;
+  return copy;
+}
+#endif
+
+static struct gr_settings bug_settings = {
+  NULL,	/* dcache */
+  "Bug>", /* prompt */
+  &bug_ops, /* ops */
+  bug_clear_breakpoints, /* clear_all_breakpoints */
+  bug_read_memory, /* readfunc */
+  bug_write_memory, /* writefunc */
+  gr_generic_checkin, /* checkin */
+};
+
+static char *cpu_check_strings[] = {
+  "=",
+  "Invalid Register",
+};
+
+static void
+bug_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args == NULL)
+      args = "";
+
+  gr_open(args, from_tty, &bug_settings);
+  /* decide *now* whether we are on an 88100 or an 88110 */
+  sr_write_cr("rs cr06");
+  sr_expect("rs cr06");
+
+  switch (gr_multi_scan(cpu_check_strings, 0))
+    {
+    case 0: /* this is an m88100 */
+      target_is_m88110 = 0;
+      break;
+    case 1: /* this is an m88110 */
+      target_is_m88110 = 1;
+      break;
+    default:
+      abort();
+    }
+}
+
+/* Tell the remote machine to resume.  */
+
+void
+bug_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  dcache_flush (gr_get_dcache());
+
+  if (step)
+    {
+      sr_write_cr("t");
+
+      /* Force the next bug_wait to return a trap.  Not doing anything
+       about I/O from the target means that the user has to type
+       "continue" to see any.  FIXME, this should be fixed.  */
+      need_artificial_trap = 1;
+    }
+  else
+      sr_write_cr ("g");
+
+  return;
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+static char *wait_strings[] = {
+  "At Breakpoint",
+  "Exception: Data Access Fault (Local Bus Timeout)",
+  "\r8??\?-Bug>",	/* The '\?' avoids creating a trigraph */
+  "\r197-Bug>",
+  NULL,
+};
+
+int
+bug_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int old_timeout = sr_get_timeout();
+  int old_immediate_quit = immediate_quit;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  /* read off leftovers from resume so that the rest can be passed
+     back out as stdout.  */
+  if (need_artificial_trap == 0)
+    {
+      sr_expect("Effective address: ");
+      (void) sr_get_hex_word();
+      sr_expect ("\r\n");
+    }
+
+  sr_set_timeout(-1); /* Don't time out -- user program is running. */
+  immediate_quit = 1; /* Helps ability to QUIT */
+
+  switch (gr_multi_scan(wait_strings, need_artificial_trap == 0))
+    {
+    case 0: /* breakpoint case */
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      /* user output from the target can be discarded here. (?) */
+      gr_expect_prompt();
+      break;
+
+    case 1: /* bus error */
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_BUS;
+      /* user output from the target can be discarded here. (?) */
+      gr_expect_prompt();
+      break;
+
+    case 2: /* normal case */
+    case 3:
+      if (need_artificial_trap != 0)
+	{
+	  /* stepping */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_TRAP;
+	  need_artificial_trap--;
+	  break;
+	}
+      else
+	{
+	  /* exit case */
+	  status->kind = TARGET_WAITKIND_EXITED;
+	  status->value.integer = 0;
+	  break;
+	}
+
+    case -1: /* trouble */
+    default:
+      fprintf_filtered (gdb_stderr,
+			"Trouble reading target during wait\n");
+      break;
+    }
+
+  sr_set_timeout(old_timeout);
+  immediate_quit = old_immediate_quit;
+  return 0;
+}
+
+/* Return the name of register number REGNO
+   in the form input and output by bug.
+
+   Returns a pointer to a static buffer containing the answer.  */
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char *rn[] = {
+    "r00", "r01", "r02", "r03", "r04", "r05", "r06", "r07",
+    "r08", "r09", "r10", "r11", "r12", "r13", "r14", "r15",
+    "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+    "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+
+    /* these get confusing because we omit a few and switch some ordering around. */
+
+    "cr01",  /* 32 = psr */
+    "fcr62", /* 33 = fpsr*/
+    "fcr63", /* 34 = fpcr */
+    "ip",			/* this is something of a cheat. */
+  /* 35 = sxip */
+    "cr05", /* 36 = snip */
+    "cr06", /* 37 = sfip */
+
+    "x00", "x01", "x02", "x03", "x04", "x05", "x06", "x07",
+    "x08", "x09", "x10", "x11", "x12", "x13", "x14", "x15",
+    "x16", "x17", "x18", "x19", "x20", "x21", "x22", "x23",
+    "x24", "x25", "x26", "x27", "x28", "x29", "x30", "x31",
+  };
+
+  return rn[regno];
+}
+
+#if 0 /* not currently used */
+/* Read from remote while the input matches STRING.  Return zero on
+   success, -1 on failure.  */
+
+static int
+bug_scan (s)
+     char *s;
+{
+  int c;
+
+  while (*s)
+    {
+      c = sr_readchar();
+      if (c != *s++)
+	{
+	  fflush(stdout);
+	  printf("\nNext character is '%c' - %d and s is \"%s\".\n", c, c, --s);
+	  return(-1);
+	}
+    }
+
+  return(0);
+}
+#endif /* never */
+
+static int
+bug_srec_write_cr (s)
+     char *s;
+{
+  char *p = s;
+
+  if (srec_echo_pace)
+    for (p = s; *p; ++p)
+      {
+	if (sr_get_debug() > 0)
+	  printf ("%c", *p);
+
+	do
+	  SERIAL_WRITE(sr_get_desc(), p, 1);
+	while (sr_pollchar() != *p);
+      }
+  else
+    {  
+      sr_write_cr (s);
+/*       return(bug_scan (s) || bug_scan ("\n")); */
+    }
+
+  return(0);
+}
+
+/* Store register REGNO, or all if REGNO == -1. */
+
+static void
+bug_fetch_register(regno)
+     int regno;
+{
+  sr_check_open();
+
+  if (regno == -1)
+    {
+      int i;
+
+      for (i = 0; i < NUM_REGS; ++i)
+	bug_fetch_register(i);
+    }
+  else if (target_is_m88110 && regno == SFIP_REGNUM)
+    {
+      /* m88110 has no sfip. */
+      long l = 0;
+      supply_register(regno, (char *) &l);
+    }
+  else if (regno < XFP_REGNUM)
+    {
+      char buffer[MAX_REGISTER_RAW_SIZE];
+
+      sr_write ("rs ", 3);
+      sr_write_cr (get_reg_name(regno));
+      sr_expect ("=");
+      store_unsigned_integer (buffer, REGISTER_RAW_SIZE (regno),
+			      sr_get_hex_word());
+      gr_expect_prompt ();
+      supply_register (regno, buffer);
+    }
+  else
+    {
+      /* Float register so we need to parse a strange data format. */
+      long p;
+      unsigned char fpreg_buf[10];
+
+      sr_write("rs ", 3);
+      sr_write(get_reg_name(regno), strlen(get_reg_name(regno)));
+      sr_write_cr(";d");
+      sr_expect("rs");
+      sr_expect(get_reg_name(regno));
+      sr_expect(";d");
+      sr_expect("=");
+
+      /* sign */
+      p = sr_get_hex_digit(1);
+      fpreg_buf[0] = p << 7;
+
+      /* exponent */
+      sr_expect("_");
+      p = sr_get_hex_digit(1);
+      fpreg_buf[0] += (p << 4);
+      fpreg_buf[0] += sr_get_hex_digit(1);
+
+      fpreg_buf[1] = sr_get_hex_digit(1) << 4;
+
+      /* fraction */
+      sr_expect("_");
+      fpreg_buf[1] += sr_get_hex_digit(1);
+
+      fpreg_buf[2] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[3] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[4] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[5] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[6] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[7] = (sr_get_hex_digit(1) << 4) + sr_get_hex_digit(1);
+      fpreg_buf[8] = 0;
+      fpreg_buf[9] = 0;
+
+      gr_expect_prompt();
+      supply_register(regno, fpreg_buf);
+    }
+
+  return;
+}
+
+/* Store register REGNO, or all if REGNO == -1. */
+
+static void
+bug_store_register (regno)
+     int regno;
+{
+  char buffer[1024];
+  sr_check_open();
+
+  if (regno == -1)
+    {
+      int i;
+
+      for (i = 0; i < NUM_REGS; ++i)
+	bug_store_register(i);
+    }
+  else
+    {
+      char *regname;
+
+      regname = get_reg_name(regno);
+
+      if (target_is_m88110 && regno == SFIP_REGNUM)
+	return;
+      else if (regno < XFP_REGNUM)
+	sprintf(buffer, "rs %s %08x",
+		regname,
+		read_register(regno));
+      else
+	{
+	  unsigned char *fpreg_buf =
+	    (unsigned char *)&registers[REGISTER_BYTE(regno)];
+	  
+	  sprintf(buffer, "rs %s %1x_%02x%1x_%1x%02x%02x%02x%02x%02x%02x;d",
+		  regname,
+		  /* sign */
+		  (fpreg_buf[0] >> 7) & 0xf,
+		  /* exponent */
+		  fpreg_buf[0] & 0x7f,
+		  (fpreg_buf[1] >> 8) & 0xf,
+		  /* fraction */
+		  fpreg_buf[1] & 0xf,
+		  fpreg_buf[2],
+		  fpreg_buf[3],
+		  fpreg_buf[4],
+		  fpreg_buf[5],
+		  fpreg_buf[6],
+		  fpreg_buf[7]);
+	}
+
+      sr_write_cr(buffer);
+      gr_expect_prompt();
+    }
+
+  return;
+}
+
+int
+bug_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* ignored */
+{
+  register int i;
+
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr;
+
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count;
+
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer;
+
+  addr = memaddr & -sizeof (int);
+  count = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+
+  buffer = (int *) alloca (count * sizeof (int));
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int) sizeof (int))
+	{
+	  /* Need part of initial word -- fetch it.  */
+	  buffer[0] = gr_fetch_word (addr);
+	}
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1]
+	    = gr_fetch_word (addr + (count - 1) * sizeof (int));
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+	  errno = 0;
+	  gr_store_word (addr, buffer[i]);
+	  if (errno)
+	    {
+
+	      return 0;
+	    }
+
+	}
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+	  errno = 0;
+	  buffer[i] = gr_fetch_word (addr);
+	  if (errno)
+	    {
+	      return 0;
+	    }
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+    }
+
+  return len;
+}
+
+static void
+start_load()
+{
+  char *command;
+
+  command = (srec_echo_pace ? "lo 0 ;x" : "lo 0");
+
+  sr_write_cr (command);
+  sr_expect (command);
+  sr_expect ("\r\n");
+  bug_srec_write_cr ("S0030000FC");
+  return;
+}
+
+/* This is an extremely vulnerable and fragile function.  I've made
+   considerable attempts to make this deterministic, but I've
+   certainly forgotten something.  The trouble is that S-records are
+   only a partial file format, not a protocol.  Worse, apparently the
+   m88k bug monitor does not run in real time while receiving
+   S-records.  Hence, we must pay excruciating attention to when and
+   where error messages are returned, and what has actually been sent.
+
+   Each call represents a chunk of memory to be sent to the target.
+   We break that chunk into an S0 header record, some number of S3
+   data records each containing srec_bytes, and an S7 termination
+   record.  */
+
+static char *srecord_strings[] = {
+  "S-RECORD",
+  "-Bug>",
+  NULL,
+};
+
+static int
+bug_write_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int done;
+  int checksum;
+  int x;
+  int retries;
+  char *buffer = alloca ((srec_bytes + 8) << 1);
+
+  retries = 0;
+
+  do
+    {
+      done = 0;
+
+      if (retries > srec_max_retries)
+	return(-1);
+
+      if (retries > 0)
+	{
+	  if (sr_get_debug() > 0)
+	    printf("\n<retrying...>\n");
+
+	  /* This gr_expect_prompt call is extremely important.  Without
+	     it, we will tend to resend our packet so fast that it
+	     will arrive before the bug monitor is ready to receive
+	     it.  This would lead to a very ugly resend loop.  */
+
+	  gr_expect_prompt();
+	}
+
+      start_load();
+
+      while (done < len)
+	{
+	  int thisgo;
+	  int idx;
+	  char *buf = buffer;
+	  CORE_ADDR address;
+
+	  checksum = 0;
+	  thisgo = len - done;
+	  if (thisgo > srec_bytes)
+	    thisgo = srec_bytes;
+
+	  address = memaddr + done;
+	  sprintf (buf, "S3%02X%08X", thisgo + 4 + 1, address);
+	  buf += 12;
+
+	  checksum += (thisgo + 4 + 1
+		       + (address & 0xff)
+		       + ((address >>  8) & 0xff)
+		       + ((address >> 16) & 0xff)
+		       + ((address >> 24) & 0xff));
+
+	  for (idx = 0; idx < thisgo; idx++)
+	    {
+	      sprintf (buf, "%02X", myaddr[idx + done]);
+	      checksum += myaddr[idx + done];
+	      buf += 2;
+	    }
+
+	  if (srec_noise > 0)
+	    {
+	      /* FIXME-NOW: insert a deliberate error every now and then.
+		 This is intended for testing/debugging the error handling
+		 stuff.  */
+	      static int counter = 0;
+	      if (++counter > srec_noise)
+		{
+		  counter = 0;
+		  ++checksum;
+		}
+	    }
+
+	  sprintf(buf, "%02X", ~checksum & 0xff);
+	  bug_srec_write_cr (buffer);
+
+	  if (srec_sleep != 0)
+	    sleep(srec_sleep);
+
+	  /* This pollchar is probably redundant to the gr_multi_scan
+	     below.  Trouble is, we can't be sure when or where an
+	     error message will appear.  Apparently, when running at
+	     full speed from a typical sun4, error messages tend to
+	     appear to arrive only *after* the s7 record.   */
+
+	  if ((x = sr_pollchar()) != 0)
+	    {
+	      if (sr_get_debug() > 0)
+		printf("\n<retrying...>\n");
+
+	      ++retries;
+
+	      /* flush any remaining input and verify that we are back
+		 at the prompt level. */
+	      gr_expect_prompt();
+	      /* start all over again. */
+	      start_load();
+	      done = 0;
+	      continue;
+	    }
+
+	  done += thisgo;
+	}
+
+      bug_srec_write_cr("S7060000000000F9");
+      ++retries;
+
+      /* Having finished the load, we need to figure out whether we
+	 had any errors.  */
+    } while (gr_multi_scan(srecord_strings, 0) == 0);;
+
+  return(0);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns errno value.
+ * sb/sh instructions don't work on unaligned addresses, when TU=1.
+ */
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns errno value.  */
+static int
+bug_read_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  char request[100];
+  char *buffer;
+  char *p;
+  char type;
+  char size;
+  unsigned char c;
+  unsigned int inaddr;
+  unsigned int checksum;
+
+  sprintf(request, "du 0 %x:&%d", memaddr, len);
+  sr_write_cr(request);
+
+  p = buffer = alloca(len);
+
+  /* scan up through the header */
+  sr_expect("S0030000FC");
+
+  while (p < buffer + len)
+    {
+      /* scan off any white space. */
+      while (sr_readchar() != 'S') ;;
+
+      /* what kind of s-rec? */
+      type = sr_readchar();
+
+      /* scan record size */
+      sr_get_hex_byte(&size);
+      checksum = size;
+      --size;
+      inaddr = 0;
+
+      switch (type)
+	{
+	case '7':
+	case '8':
+	case '9':
+	  goto done;
+
+	case '3':
+	  sr_get_hex_byte(&c);
+	  inaddr = (inaddr << 8) + c;
+	  checksum += c;
+	  --size;
+	  /* intentional fall through */
+	case '2':
+	  sr_get_hex_byte(&c);
+	  inaddr = (inaddr << 8) + c;
+	  checksum += c;
+	  --size;
+	  /* intentional fall through */
+	case '1':
+	  sr_get_hex_byte(&c);
+	  inaddr = (inaddr << 8) + c;
+	  checksum += c;
+	  --size;
+	  sr_get_hex_byte(&c);
+	  inaddr = (inaddr << 8) + c;
+	  checksum += c;
+	  --size;
+	  break;
+
+	default:
+	  /* bonk */
+	  error("reading s-records.");
+	}
+
+      if (inaddr < memaddr
+	  || (memaddr + len) < (inaddr + size))
+	error("srec out of memory range.");
+
+      if (p != buffer + inaddr - memaddr)
+	error("srec out of sequence.");
+
+      for (; size; --size, ++p)
+	{
+	  sr_get_hex_byte(p);
+	  checksum += *p;
+	}
+
+      sr_get_hex_byte(&c);
+      if (c != (~checksum & 0xff))
+	error("bad s-rec checksum");
+    }
+
+ done:
+  gr_expect_prompt();
+  if (p != buffer + len)
+    return(1);
+
+  memcpy(myaddr, buffer, len);
+  return(0);
+}
+
+#define MAX_BREAKS	16
+static int num_brkpts = 0;
+static int
+bug_insert_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;		/* Throw away, let bug save instructions */
+{
+  sr_check_open ();
+
+  if (num_brkpts < MAX_BREAKS)
+    {
+      char buffer[100];
+
+      num_brkpts++;
+      sprintf (buffer, "br %x", addr);
+      sr_write_cr (buffer);
+      gr_expect_prompt ();
+      return(0);
+    }
+  else
+    {
+      fprintf_filtered (gdb_stderr,
+		      "Too many break points, break point not installed\n");
+      return(1);
+    }
+
+}
+static int
+bug_remove_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;		/* Throw away, let bug save instructions */
+{
+  if (num_brkpts > 0)
+    {
+      char buffer[100];
+
+      num_brkpts--;
+      sprintf (buffer, "nobr %x", addr);
+      sr_write_cr (buffer);
+      gr_expect_prompt ();
+
+    }
+  return (0);
+}
+
+/* Clear the bugs notion of what the break points are */
+static int
+bug_clear_breakpoints ()
+{
+
+  if (sr_is_open())
+    {
+      sr_write_cr ("nobr");
+      sr_expect("nobr");
+      gr_expect_prompt ();
+    }
+  num_brkpts = 0;
+  return(0);
+}
+
+struct target_ops bug_ops ;
+
+static void 
+init_bug_ops(void)
+{
+  bug_ops.to_shortname =   "bug"; "Remote BUG monitor",
+				    bug_ops.to_longname =   "Use the mvme187 board running the BUG monitor connected by a serial line.";
+  bug_ops.to_doc =   " ";
+  bug_ops.to_open =   bug_open;
+  bug_ops.to_close =   gr_close;
+  bug_ops.to_attach =   0;
+  bug_ops.to_post_attach = NULL;
+  bug_ops.to_require_attach = NULL;
+  bug_ops.to_detach =   gr_detach;
+  bug_ops.to_require_detach = NULL;
+  bug_ops.to_resume =   bug_resume;
+  bug_ops.to_wait  =   bug_wait;
+  bug_ops.to_post_wait = NULL;
+  bug_ops.to_fetch_registers  =   bug_fetch_register;
+  bug_ops.to_store_registers  =   bug_store_register;
+  bug_ops.to_prepare_to_store =   gr_prepare_to_store;
+  bug_ops.to_xfer_memory  =   bug_xfer_memory;
+  bug_ops.to_files_info  =   gr_files_info;
+  bug_ops.to_insert_breakpoint =   bug_insert_breakpoint;
+  bug_ops.to_remove_breakpoint =   bug_remove_breakpoint;
+  bug_ops.to_terminal_init  =   0;
+  bug_ops.to_terminal_inferior =   0;
+  bug_ops.to_terminal_ours_for_output =   0;
+  bug_ops.to_terminal_ours  =   0;
+  bug_ops.to_terminal_info  =   0;		
+  bug_ops.to_kill  =   gr_kill;			
+  bug_ops.to_load  =   bug_load;
+  bug_ops.to_lookup_symbol =   0;			
+  bug_ops.to_create_inferior =   gr_create_inferior;	
+  bug_ops.to_post_startup_inferior = NULL;
+  bug_ops.to_acknowledge_created_inferior = NULL;
+  bug_ops.to_clone_and_follow_inferior = NULL;          
+  bug_ops.to_post_follow_inferior_by_clone = NULL;  
+  bug_ops.to_insert_fork_catchpoint = NULL;
+  bug_ops.to_remove_fork_catchpoint = NULL;
+  bug_ops.to_insert_vfork_catchpoint = NULL;
+  bug_ops.to_remove_vfork_catchpoint = NULL;                      
+  bug_ops.to_has_forked = NULL;
+  bug_ops.to_has_vforked = NULL; 
+  bug_ops.to_can_follow_vfork_prior_to_exec = NULL;                       
+  bug_ops.to_post_follow_vfork = NULL;
+  bug_ops.to_insert_exec_catchpoint = NULL;
+  bug_ops.to_remove_exec_catchpoint = NULL;
+  bug_ops.to_has_execd = NULL;
+  bug_ops.to_reported_exec_events_per_exec_call = NULL;
+  bug_ops.to_has_exited = NULL;
+  bug_ops.to_mourn_inferior =   gr_mourn;		
+  bug_ops.to_can_run  =   0;				
+  bug_ops.to_notice_signals =   0;			
+  bug_ops.to_thread_alive  =  0 ;
+  bug_ops.to_stop  =   0;
+  bug_ops.to_pid_to_exec_file = NULL;
+  bug_ops.to_core_file_to_sym_file = NULL;
+  bug_ops.to_stratum =   process_stratum ;
+  bug_ops.DONT_USE =   0;
+  bug_ops.to_has_all_memory =   1;
+  bug_ops.to_has_memory =   1;
+  bug_ops.to_has_stack =   1;	
+  bug_ops.to_has_registers =   0;
+  bug_ops.to_has_execution =   0;			
+  bug_ops.to_sections =   0 ;
+  bug_ops.to_sections_end = 0 ;
+  bug_ops.to_magic = OPS_MAGIC;			/* Always the last thing */
+} /* init_bug_ops */
+
+void
+_initialize_remote_bug ()
+{
+  init_bug_ops() ;
+  add_target (&bug_ops);
+
+  add_show_from_set
+    (add_set_cmd ("srec-bytes", class_support, var_uinteger,
+		  (char *) &srec_bytes,
+		  "\
+Set the number of bytes represented in each S-record.\n\
+This affects the communication protocol with the remote target.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("srec-max-retries", class_support, var_uinteger,
+		  (char *) &srec_max_retries,
+		  "\
+Set the number of retries for shipping S-records.\n\
+This affects the communication protocol with the remote target.",
+		  &setlist),
+     &showlist);
+
+#if 0
+  /* This needs to set SREC_SIZE, not srec_frame which gets changed at the
+     end of a download.  But do we need the option at all?  */
+  add_show_from_set
+    (add_set_cmd ("srec-frame", class_support, var_uinteger,
+		  (char *) &srec_frame,
+		  "\
+Set the number of bytes in an S-record frame.\n\
+This affects the communication protocol with the remote target.",
+		  &setlist),
+     &showlist);
+#endif /* 0 */
+
+  add_show_from_set
+    (add_set_cmd ("srec-noise", class_support, var_zinteger,
+		  (char *) &srec_noise,
+		  "\
+Set number of S-record to send before deliberately flubbing a checksum.\n\
+Zero means flub none at all.  This affects the communication protocol\n\
+with the remote target.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("srec-sleep", class_support, var_zinteger,
+		  (char *) &srec_sleep,
+		  "\
+Set number of seconds to sleep after an S-record for a possible error message to arrive.\n\
+This affects the communication protocol with the remote target.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("srec-echo-pace", class_support, var_boolean,
+		  (char *) &srec_echo_pace,
+		  "\
+Set echo-verification.\n\
+When on, use verification by echo when downloading S-records.  This is\n\
+much slower, but generally more reliable.", 
+		  &setlist),
+     &showlist);
+}
diff --git a/gdb/remote-d10v.c b/gdb/remote-d10v.c
new file mode 100644
index 0000000..d529b21
--- /dev/null
+++ b/gdb/remote-d10v.c
@@ -0,0 +1,228 @@
+/* Remote target communications for d10v connected via a serial line.
+   Copyright 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Free
+   Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+/*#include "terminal.h"*/
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "gdbthread.h"
+
+#include "dcache.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+#include "serial.h"
+
+/* Prototypes for local functions */
+
+static void remote_d10v_open PARAMS ((char *name, int from_tty));
+
+/* Define the target subroutine names */
+static struct target_ops remote_d10v_ops;
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static void
+remote_d10v_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  pop_target ();
+  push_remote_target (name, from_tty);
+}
+
+
+/* Translate a GDB virtual ADDR/LEN into a format the remote target
+   understands.  Returns number of bytes that can be transfered
+   starting at taddr, ZERO if no bytes can be transfered. */
+int
+remote_d10v_translate_xfer_address (memaddr, nr_bytes, taddr)
+     CORE_ADDR memaddr;
+     int nr_bytes;
+     CORE_ADDR *taddr;
+{
+  CORE_ADDR phys;
+  CORE_ADDR seg;
+  CORE_ADDR off;
+  char *from = "unknown";
+  char *to = "unknown";
+  unsigned short imap0 = read_register (IMAP0_REGNUM);
+  unsigned short imap1 = read_register (IMAP1_REGNUM);
+  unsigned short dmap = read_register (DMAP_REGNUM);
+
+  /* GDB interprets addresses as:
+
+       0x00xxxxxx: Logical data address segment        (DMAP translated memory)
+       0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
+       0x10xxxxxx: Physical data memory segment        (On-chip data memory)
+       0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
+       0x12xxxxxx: Phisical unified memory segment     (Unified memory)
+
+     The remote d10v board interprets addresses as:
+
+       0x00xxxxxx: Phisical unified memory segment     (Unified memory)
+       0x01xxxxxx: Physical instruction memory segment (On-chip insn memory)
+       0x02xxxxxx: Physical data memory segment        (On-chip data memory)
+
+     Translate according to current IMAP/dmap registers */
+
+  enum {
+    targ_unified = 0x00000000,
+    targ_insn = 0x01000000,
+    targ_data = 0x02000000,
+  };
+
+  seg = (memaddr >> 24);
+  off = (memaddr & 0xffffffL);
+
+  switch (seg) 
+      {
+      case 0x00: /* in logical data address segment */
+	{
+	  from = "logical-data";
+	  if (off <= 0x7fffL)
+	    {
+	      /* On chip data */
+	      phys = targ_data + off;
+	      if (off + nr_bytes > 0x7fffL)
+		/* don't cross VM boundary */
+		nr_bytes = 0x7fffL - off + 1;
+	      to = "chip-data";
+	    }
+	  else if (off <= 0xbfffL)
+	    {
+	      short map = dmap;
+	      if (map & 0x1000)
+		{
+		  /* Instruction memory */
+		  phys = targ_insn | ((map & 0xf) << 14) | (off & 0x3fff);
+		  to = "chip-insn";
+		}
+	      else
+		{
+		  /* Unified memory */
+		  phys = targ_unified | ((map & 0x3ff) << 14) | (off & 0x3fff);
+		  to = "unified";
+		}
+	      if (off + nr_bytes > 0xbfffL)
+		/* don't cross VM boundary */
+		nr_bytes = (0xbfffL - off + 1);
+	    }	    
+	  else
+	    {
+	      /* Logical address out side of data segments, not supported */
+	      return (0);
+	    }
+	  break;
+	}
+
+      case 0x01: /* in logical instruction address segment */
+	{
+	  short map;
+	  from = "logical-insn";
+	  if (off <= 0x1ffffL)
+	    {
+	      map = imap0;
+	    }
+	  else if (off <= 0x3ffffL)
+	    {
+	      map = imap1;
+	    }
+	  else
+	    {
+	      /* Logical address outside of IMAP[01] segment, not
+		 supported */
+	      return (0);
+	    }
+	  if ((off & 0x1ffff) + nr_bytes > 0x1ffffL)
+	    {
+	      /* don't cross VM boundary */
+	      nr_bytes = 0x1ffffL - (off & 0x1ffffL) + 1;
+	    }
+	  if (map & 0x1000)
+	    /* Instruction memory */
+	    {
+	      phys = targ_insn | off;
+	      to = "chip-insn";
+	    }
+	  else
+	    {
+	      phys = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
+	      if (phys > 0xffffffL)
+		/* Address outside of unified address segment */
+		return (0);
+	      phys |= targ_unified;
+	      to = "unified";
+	    }
+	  break;
+	}
+
+      case 0x10: /* Physical data memory segment */
+	from = "phys-data";
+	phys = targ_data | off;
+	to = "chip-data";
+	break;
+
+      case 0x11: /* Physical instruction memory */
+	from = "phys-insn";
+	phys = targ_insn | off;
+	to = "chip-insn";
+	break;
+
+      case 0x12: /* Physical unified memory */
+	from = "phys-unified";
+	phys = targ_unified | off;
+	to = "unified";
+	break;
+
+      default:
+	return (0);
+      }
+
+
+  *taddr = phys;
+  return nr_bytes;
+}
+
+
+void
+_initialize_remote_d10v ()
+{
+  remote_d10v_ops.to_shortname = "d10v";
+  remote_d10v_ops.to_longname = "Remote d10v serial target in gdb-specific protocol";
+  remote_d10v_ops.to_doc = "Use a remote d10v via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  remote_d10v_ops.to_open = remote_d10v_open;
+
+  add_target (&remote_d10v_ops);
+}
diff --git a/gdb/remote-e7000.c b/gdb/remote-e7000.c
new file mode 100644
index 0000000..92e69b3
--- /dev/null
+++ b/gdb/remote-e7000.c
@@ -0,0 +1,2258 @@
+/* Remote debugging interface for Hitachi E7000 ICE, for GDB
+   Copyright 1993, 1994, 1996, 1997, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Support. 
+
+   Written by Steve Chamberlain for Cygnus Support.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The E7000 is an in-circuit emulator for the Hitachi H8/300-H and
+   Hitachi-SH processor.  It has serial port and a lan port.  
+
+   The monitor command set makes it difficult to load large ammounts of
+   data over the lan without using ftp - so try not to issue load
+   commands when communicating over ethernet; use the ftpload command.
+
+   The monitor pauses for a second when dumping srecords to the serial
+   line too, so we use a slower per byte mechanism but without the
+   startup overhead.  Even so, it's pretty slow... */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "gdbarch.h"
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "value.h"
+#include "command.h"
+#include <signal.h>
+#include "gdb_string.h"
+#include "gdbcmd.h"
+#include <sys/types.h>
+#include "serial.h"
+#include "remote-utils.h"
+#include "symfile.h"
+#include <time.h>
+#include <ctype.h>
+
+
+#if 1
+#define HARD_BREAKPOINTS	/* Now handled by set option. */
+#define BC_BREAKPOINTS use_hard_breakpoints
+#endif
+
+#define CTRLC 0x03
+#define ENQ  0x05
+#define ACK  0x06
+#define CTRLZ 0x1a
+
+extern void notice_quit PARAMS ((void));
+
+extern void report_transfer_performance PARAMS ((unsigned long,
+						 time_t, time_t));
+
+extern char *sh_processor_type;
+
+/* Local function declarations.  */
+
+static void e7000_close PARAMS ((int));
+
+static void e7000_fetch_register PARAMS ((int));
+
+static void e7000_store_register PARAMS ((int));
+
+static void e7000_command PARAMS ((char *, int));
+
+static void e7000_login_command PARAMS ((char *, int));
+
+static void e7000_ftp_command PARAMS ((char *, int));
+
+static void e7000_drain_command PARAMS ((char *, int));
+
+static void expect PARAMS ((char *));
+
+static void expect_full_prompt PARAMS ((void));
+
+static void expect_prompt PARAMS ((void));
+
+static int e7000_parse_device PARAMS ((char *args, char *dev_name,
+				       int baudrate));
+/* Variables. */
+
+static serial_t e7000_desc;
+
+/* Allow user to chose between using hardware breakpoints or memory. */
+static int use_hard_breakpoints = 0; /* use sw breakpoints by default */
+
+/* Nonzero if using the tcp serial driver.  */
+
+static int using_tcp;	/* direct tcp connection to target */
+static int using_tcp_remote;	/* indirect connection to target 
+				   via tcp to controller */
+
+/* Nonzero if using the pc isa card.  */
+
+static int using_pc;
+
+extern struct target_ops e7000_ops;	/* Forward declaration */
+
+char *ENQSTRING = "\005";
+
+/* Nonzero if some routine (as opposed to the user) wants echoing.
+   FIXME: Do this reentrantly with an extra parameter.  */
+
+static int echo;
+
+static int ctrl_c;
+
+static int timeout = 20;
+
+/* Send data to e7000debug.  */
+
+static void
+puts_e7000debug (buf)
+     char *buf;
+{
+  if (!e7000_desc)
+    error ("Use \"target e7000 ...\" first.");
+
+  if (remote_debug)
+    printf_unfiltered ("Sending %s\n", buf);
+
+  if (SERIAL_WRITE (e7000_desc, buf, strlen (buf)))
+    fprintf_unfiltered (gdb_stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno));
+
+  /* And expect to see it echoed, unless using the pc interface */
+#if 0
+  if (!using_pc)
+#endif
+    expect (buf);
+}
+
+static void
+putchar_e7000 (x)
+     int x;
+{
+  char b[1];
+
+  b[0] = x;
+  SERIAL_WRITE (e7000_desc, b, 1);
+}
+
+static void
+write_e7000 (s)
+     char *s;
+{
+  SERIAL_WRITE (e7000_desc, s, strlen (s));
+}
+
+static int
+normal (x)
+     int x;
+{
+  if (x == '\n')
+    return '\r';
+  return x;
+}
+
+/* Read a character from the remote system, doing all the fancy timeout
+   stuff.  Handles serial errors and EOF.  If TIMEOUT == 0, and no chars,
+   returns -1, else returns next char.  Discards chars > 127.  */
+
+static int
+readchar (timeout)
+     int timeout;
+{
+  int c;
+
+  do
+    {
+      c = SERIAL_READCHAR (e7000_desc, timeout);
+    }
+  while (c > 127);
+
+  if (c == SERIAL_TIMEOUT)
+    {
+      if (timeout == 0)
+	return -1;
+      echo = 0;
+      error ("Timeout reading from remote system.");
+    }
+  else if (c < 0)
+    error ("Serial communication error");
+
+  if (remote_debug) 
+    {
+      putchar_unfiltered (c);
+      gdb_flush (gdb_stdout);
+    }
+
+  return normal (c);
+}
+
+#if 0
+char *
+tl (x)
+{
+  static char b[8][10];
+  static int p;
+
+  p++;
+  p &= 7;
+  if (x >= ' ') 
+    { 
+      b[p][0] = x;
+      b[p][1] = 0;
+    }
+  else
+    {
+      sprintf(b[p], "<%d>", x);
+    }
+
+  return b[p];
+}
+#endif
+
+/* Scan input from the remote system, until STRING is found.  If
+   DISCARD is non-zero, then discard non-matching input, else print it
+   out.  Let the user break out immediately.  */
+
+static void
+expect (string)
+     char *string;
+{
+  char *p = string;
+  int c;
+  int nl = 0;
+
+  while (1)
+    {
+      c = readchar (timeout);
+#if 0
+      notice_quit ();
+      if (quit_flag == 1) 
+	{
+	  if (ctrl_c)
+	    {
+	      putchar_e7000(CTRLC);
+	      --ctrl_c;
+	    }
+	  else 
+	    {
+	      quit ();
+	    }
+	}
+#endif
+      
+      if (echo)
+	{
+	  if (c == '\r' || c == '\n')
+	    {
+	      if (!nl)
+		putchar_unfiltered ('\n');
+	      nl = 1;
+	    }
+	  else
+	    {
+	      nl = 0;
+	      putchar_unfiltered (c);
+	    }
+	  gdb_flush (gdb_stdout);
+	}
+      if (normal (c) == normal (*p++))
+	{
+	  if (*p == '\0')
+	    return;
+	}
+      else
+	{
+	  p = string;
+
+	  if (normal (c) == normal (string[0]))
+	    p++;
+	}
+    }
+}
+
+/* Keep discarding input until we see the e7000 prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line will
+   be an expect_prompt().  Exception: e7000_resume does not wait for
+   the prompt, because the terminal is being handed over to the
+   inferior.  However, the next thing which happens after that is a
+   e7000_wait which does wait for the prompt.  Note that this includes
+   abnormal exit, e.g. error().  This is necessary to prevent getting
+   into states from which we can't recover.  */
+
+static void
+expect_prompt ()
+{
+  expect (":");
+}
+
+static void
+expect_full_prompt ()
+{
+  expect ("\r:");
+}
+
+static int
+convert_hex_digit (ch)
+     int ch;
+{
+  if (ch >= '0' && ch <= '9')
+    return ch - '0';
+  else if (ch >= 'A' && ch <= 'F')
+    return ch - 'A' + 10;
+  else if (ch >= 'a' && ch <= 'f')
+    return ch - 'a' + 10;
+  return -1;
+}
+
+static int
+get_hex (start)
+     int *start;
+{
+  int value = convert_hex_digit (*start);
+  int try;
+
+  *start = readchar (timeout);
+  while ((try = convert_hex_digit (*start)) >= 0)
+    {
+      value <<= 4;
+      value += try;
+      *start = readchar (timeout);
+    }
+  return value;
+}
+
+#if 0
+/* Get N 32-bit words from remote, each preceded by a space, and put
+   them in registers starting at REGNO.  */
+
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+  long val;
+  int i;
+
+  for (i = 0; i < n; i++)
+    {
+      int j;
+
+      val = 0;
+      for (j = 0; j < 8; j++)
+	val = (val << 4) + get_hex_digit (j == 0);
+      supply_register (regno++, (char *) &val);
+    }
+}
+#endif
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+
+static void
+e7000_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error ("Can't pass arguments to remote E7000DEBUG process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+#ifdef CREATE_INFERIOR_HOOK
+  CREATE_INFERIOR_HOOK (0);	/* No process-ID */
+#endif
+
+  /* The "process" (board) is already stopped awaiting our commands, and
+     the program is already downloaded.  We just set its PC and go.  */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  proceed ((CORE_ADDR) entry_pt, -1, 0);	/* Let 'er rip... */
+}
+
+/* Open a connection to a remote debugger.  NAME is the filename used
+   for communication.  */
+
+static int baudrate = 9600;
+static char dev_name[100];
+
+static char *machine = "";
+static char *user = "";
+static char *passwd = "";
+static char *dir = "";
+
+/* Grab the next token and buy some space for it */
+
+static char *
+next (ptr)
+     char **ptr;
+{
+  char *p = *ptr;
+  char *s;
+  char *r;
+  int l = 0;
+
+  while (*p && *p == ' ')
+    p++;
+  s = p;
+  while (*p && (*p != ' ' && *p != '\t'))
+    {
+      l++;
+      p++;
+    }
+  r = xmalloc (l + 1);
+  memcpy (r, s, l);
+  r[l] = 0;
+  *ptr = p;
+  return r;
+}
+
+static void
+e7000_login_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    {
+      machine = next (&args);
+      user = next (&args);
+      passwd = next (&args);
+      dir = next (&args);
+      if (from_tty)
+	{
+	  printf_unfiltered ("Set info to %s %s %s %s\n", machine, user, passwd, dir);
+	}
+    }
+  else
+    {
+      error ("Syntax is ftplogin <machine> <user> <passwd> <directory>");
+    }
+}
+
+/* Start an ftp transfer from the E7000 to a host */
+
+static void
+e7000_ftp_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* FIXME: arbitrary limit on machine names and such.  */
+  char buf[200];
+
+  int oldtimeout = timeout;
+  timeout = remote_timeout;
+
+  sprintf (buf, "ftp %s\r", machine);
+  puts_e7000debug (buf);
+  expect (" Username : ");
+  sprintf (buf, "%s\r", user);
+  puts_e7000debug (buf);
+  expect (" Password : ");
+  write_e7000 (passwd);
+  write_e7000 ("\r");
+  expect ("success\r");
+  expect ("FTP>");
+  sprintf (buf, "cd %s\r", dir);
+  puts_e7000debug (buf);
+  expect ("FTP>");
+  sprintf (buf, "ll 0;s:%s\r", args);
+  puts_e7000debug (buf);
+  expect ("FTP>");
+  puts_e7000debug ("bye\r");
+  expect (":");
+  timeout = oldtimeout;
+}
+
+static int 
+e7000_parse_device (args, dev_name, baudrate) 
+    char *args;
+    char *dev_name;
+    int baudrate;
+{
+  char junk[128];
+  int n = 0;
+  if (args && strcasecmp (args, "pc") == 0)
+    {
+      strcpy (dev_name, args);
+      using_pc = 1;
+    }
+  else 
+    {
+      /* FIXME! temp hack to allow use with port master -
+	     target tcp_remote <device> */
+      if (args && strncmp (args, "tcp", 10) == 0) 
+        {
+	  char com_type[128];
+	  n = sscanf (args, " %s %s %d %s", com_type, dev_name, &baudrate, junk);
+	  using_tcp_remote=1;
+	  n--;
+        }
+      else if (args) 
+	{
+	  n = sscanf (args, " %s %d %s", dev_name, &baudrate, junk);
+	}
+
+      if (n != 1 && n != 2)
+	{
+	  error ("Bad arguments.  Usage:\ttarget e7000 <device> <speed>\n\
+or \t\ttarget e7000 <host>[:<port>]\n\
+or \t\ttarget e7000 tcp_remote <host>[:<port>]\n\
+or \t\ttarget e7000 pc\n");
+	}
+
+#if !defined(__GO32__) && !defined(_WIN32)
+      /* FIXME!  test for ':' is ambiguous */
+      if (n == 1 && strchr (dev_name, ':') == 0)
+	{
+	  /* Default to normal telnet port */
+	  /* serial_open will use this to determine tcp communication */
+	  strcat (dev_name, ":23");
+	}
+#endif
+      if (!using_tcp_remote && strchr (dev_name, ':'))
+        using_tcp = 1;
+    }
+
+  return n;
+}
+
+/* Stub for catch_errors.  */
+
+static int
+e7000_start_remote (dummy)
+     char *dummy;
+{
+  int loop;
+  int sync;
+  int try;
+  int quit_trying;
+
+  immediate_quit = 1;		/* Allow user to interrupt it */
+
+  /* Hello?  Are you there?  */
+  sync = 0;
+  loop =  0;
+  try = 0;
+  quit_trying = 20;
+  putchar_e7000 (CTRLC);
+  while (!sync && ++try <= quit_trying)
+    {
+      int c;
+
+      printf_unfiltered ("[waiting for e7000...]\n");
+
+      write_e7000 ("\r");
+      c = readchar (1);
+
+      /* FIXME!  this didn't seem right->  while (c != SERIAL_TIMEOUT)
+       * we get stuck in this loop ...
+       * We may never timeout, and never sync up :-(
+       */
+      while (!sync && c != -1)
+	{
+	  /* Dont echo cr's */
+	  if (c != '\r')
+	    {
+	      putchar_unfiltered (c);
+	      gdb_flush (gdb_stdout);
+	    }
+	  /* Shouldn't we either break here, or check for sync in inner loop? */
+	  if (c == ':')
+	    sync = 1;
+
+	  if (loop++ == 20) 
+	    {
+	      putchar_e7000 (CTRLC);
+	      loop = 0;
+	    }
+
+	  QUIT ;
+
+	  if (quit_flag)
+	    {
+	      putchar_e7000 (CTRLC);
+	      /* Was-> quit_flag = 0; */
+	      c = -1;
+	      quit_trying = try+1;  /* we don't want to try anymore */
+	    }
+	  else
+	    {
+	      c = readchar (1);
+	    }
+	}
+    }
+
+  if (!sync)
+    {
+      fprintf_unfiltered (gdb_stderr, "Giving up after %d tries...\n",try);
+      error ("Unable to syncronize with target.\n");
+    }
+
+  puts_e7000debug ("\r");
+  expect_prompt ();
+  puts_e7000debug ("b -\r");	/* Clear breakpoints */
+  expect_prompt ();
+
+  immediate_quit = 0;
+
+/* This is really the job of start_remote however, that makes an assumption
+   that the target is about to print out a status message of some sort.  That
+   doesn't happen here. */
+
+  flush_cached_frames ();
+  registers_changed ();
+  stop_pc = read_pc ();
+  set_current_frame (create_new_frame (read_fp (), stop_pc));
+  select_frame (get_current_frame (), 0);
+  print_stack_frame (selected_frame, -1, 1);
+
+  return 1;
+}
+
+static void
+e7000_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int n;
+
+  target_preopen (from_tty);
+
+  n = e7000_parse_device (args, dev_name, baudrate);
+
+  push_target (&e7000_ops);
+
+  e7000_desc = SERIAL_OPEN (dev_name);
+
+  if (!e7000_desc)
+    perror_with_name (dev_name);
+
+  SERIAL_SETBAUDRATE (e7000_desc, baudrate);
+  SERIAL_RAW (e7000_desc);
+
+#ifdef GDB_TARGET_IS_H8300
+  h8300hmode = 1;
+#endif
+
+  /* Start the remote connection; if error (0), discard this target.
+     In particular, if the user quits, be sure to discard it
+     (we'd be in an inconsistent state otherwise).  */
+  if (!catch_errors (e7000_start_remote, (char *)0, 
+		     "Couldn't establish connection to remote target\n", RETURN_MASK_ALL))
+  if (from_tty)
+    printf_filtered ("Remote target %s connected to %s\n", target_shortname,
+		     dev_name);
+}
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+e7000_close (quitting)
+     int quitting;
+{
+  if (e7000_desc)
+    {
+      SERIAL_CLOSE (e7000_desc);
+      e7000_desc = 0;
+    }
+}
+
+/* Terminate the open connection to the remote debugger.  Use this
+   when you want to detach and do something else with your gdb.  */
+
+static void
+e7000_detach (from_tty)
+     int from_tty;
+{
+  pop_target ();		/* calls e7000_close to do the real work */
+  if (from_tty)
+    printf_unfiltered ("Ending remote %s debugging\n", target_shortname);
+}
+
+/* Tell the remote machine to resume.  */
+
+static void
+e7000_resume (pid, step, sig)
+     int pid, step, sig;
+{
+  if (step)
+    puts_e7000debug ("S\r");
+  else
+    puts_e7000debug ("G\r");
+}
+
+/* Read the remote registers into the block REGS.  
+
+   For the H8/300 a register dump looks like:
+
+   PC=00021A  CCR=80:I*******
+   ER0 - ER3  0000000A 0000002E 0000002E 00000000
+   ER4 - ER7  00000000 00000000 00000000 00FFEFF6
+   000218           MOV.B     R1L,R2L
+   STEP NORMAL END or
+   BREAK POINT
+   */
+
+#ifdef GDB_TARGET_IS_H8300
+
+char *want_h8300h = "PC=%p CCR=%c\n\
+ ER0 - ER3  %0 %1 %2 %3\n\
+ ER4 - ER7  %4 %5 %6 %7\n";
+
+char *want_nopc_h8300h = "%p CCR=%c\n\
+ ER0 - ER3  %0 %1 %2 %3\n\
+ ER4 - ER7  %4 %5 %6 %7";
+
+char *want_h8300s = "PC=%p CCR=%c\n\
+ MACH=\n\
+ ER0 - ER3  %0 %1 %2 %3\n\
+ ER4 - ER7  %4 %5 %6 %7\n";
+
+char *want_nopc_h8300s = "%p CCR=%c EXR=%9\n\
+ ER0 - ER3  %0 %1 %2 %3\n\
+ ER4 - ER7  %4 %5 %6 %7";
+
+#endif
+
+#ifdef GDB_TARGET_IS_SH
+
+char *want = "PC=%16 SR=%22\n\
+PR=%17 GBR=%18 VBR=%19\n\
+MACH=%20 MACL=%21\n\
+R0-7  %0 %1 %2 %3 %4 %5 %6 %7\n\
+R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n";
+
+char *want_nopc = "%16 SR=%22\n\
+ PR=%17 GBR=%18 VBR=%19\n\
+ MACH=%20 MACL=%21\n\
+ R0-7  %0 %1 %2 %3 %4 %5 %6 %7\n\
+ R8-15 %8 %9 %10 %11 %12 %13 %14 %15";
+
+char *want_sh3 = "PC=%16 SR=%22\n\
+PR=%17 GBR=%18 VBR=%19\n\
+MACH=%20 MACL=%21 SSR=%23 SPC=%24\n\
+R0-7  %0 %1 %2 %3 %4 %5 %6 %7\n\
+R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n\
+R0_BANK0-R3_BANK0 %25 %26 %27 %28\n\
+R4_BANK0-R7_BANK0 %29 %30 %31 %32\n\
+R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
+R4_BANK1-R7_BANK1 %37 %38 %39 %40";
+
+char *want_sh3_nopc = "%16 SR=%22\n\
+ PR=%17 GBR=%18 VBR=%19\n\
+ MACH=%20 MACL=%21 SSR=%22 SPC=%23\n\
+ R0-7  %0 %1 %2 %3 %4 %5 %6 %7\n\
+ R8-15 %8 %9 %10 %11 %12 %13 %14 %15\n\
+ R0_BANK0-R3_BANK0 %25 %26 %27 %28\n\
+ R4_BANK0-R7_BANK0 %29 %30 %31 %32\n\
+ R0_BANK1-R3_BANK1 %33 %34 %35 %36\n\
+ R4_BANK1-R7_BANK1 %37 %38 %39 %40";
+
+#endif
+
+static int
+gch ()
+{
+  return readchar (timeout);
+}
+
+static unsigned int
+gbyte ()
+{
+  int high = convert_hex_digit (gch ());
+  int low = convert_hex_digit (gch ());
+
+  return (high << 4) + low;
+}
+
+void
+fetch_regs_from_dump (nextchar, want)
+     int (*nextchar)();
+     char *want;
+{
+  int regno;
+  char buf[MAX_REGISTER_RAW_SIZE];
+
+  int thischar = nextchar ();
+
+  while (*want)
+    {
+      switch (*want)
+	{
+	case '\n':
+	  /* Skip to end of line and then eat all new line type stuff */
+	  while (thischar != '\n' && thischar != '\r') 
+	    thischar = nextchar ();
+	  while (thischar == '\n' || thischar == '\r') 
+	    thischar = nextchar ();
+	  want++;
+	  break;
+
+	case ' ':
+	  while (thischar == ' '
+		 || thischar == '\t'
+		 || thischar == '\r'
+		 || thischar == '\n')
+	    thischar = nextchar ();
+	  want++;
+	  break;
+	  
+	default:
+	  if (*want == thischar)
+	    {
+	      want++;
+	      if (*want)
+		thischar = nextchar ();
+	      
+	    }
+	  else if (thischar == ' ' || thischar == '\n' || thischar == '\r')
+	    {
+	      thischar = nextchar ();
+	    }
+	  else {
+	    error ("out of sync in fetch registers wanted <%s>, got <%c 0x%x>",
+		   want, thischar, thischar);
+	  }
+    
+	  break;
+	case '%':
+	  /* Got a register command */
+	  want++;
+	  switch (*want)
+	    {
+#ifdef PC_REGNUM
+	    case 'p':
+	      regno = PC_REGNUM;
+	      want++;
+	      break;
+#endif
+#ifdef CCR_REGNUM
+	    case 'c':
+	      regno = CCR_REGNUM;
+	      want++;
+	      break;
+#endif
+#ifdef SP_REGNUM
+	    case 's':
+	      regno = SP_REGNUM;
+	      want++;
+	      break;
+#endif
+#ifdef FP_REGNUM
+	    case 'f':
+	      regno = FP_REGNUM;
+	      want++;
+	      break;
+#endif
+
+	    default:
+	      if (isdigit (want[0])) 
+		{
+		  if (isdigit (want[1]))
+		    {
+		      regno = (want[0] - '0') * 10 + want[1] - '0';
+		      want += 2;
+		    }
+		  else 
+		    {
+		      regno = want[0] - '0';
+		      want++;
+		    }
+		}
+	      
+	      else
+		abort ();
+	    }
+	  store_signed_integer (buf,
+				REGISTER_RAW_SIZE(regno),
+				(LONGEST) get_hex (&thischar, nextchar));
+	  supply_register (regno, buf);
+	  break;
+	}
+    }
+}
+
+static void
+e7000_fetch_registers ()
+{
+  int regno;
+  char *wanted;
+
+  puts_e7000debug ("R\r");
+
+#ifdef GDB_TARGET_IS_SH
+  wanted = want;
+  if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
+    switch (TARGET_ARCHITECTURE->mach)
+      {
+      case bfd_mach_sh3:
+      case bfd_mach_sh3e:
+	wanted = want_sh3;
+      }
+#else
+  if (h8300smode)
+    wanted = want_h8300s;
+  else
+    wanted = want_h8300h;
+#endif
+  fetch_regs_from_dump (gch, wanted);
+
+  /* And supply the extra ones the simulator uses */
+  for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
+    {
+      int buf = 0;
+
+      supply_register (regno, (char *) (&buf));
+    }
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.  Returns
+   errno value.  */
+
+static void
+e7000_fetch_register (regno)
+     int regno;
+{
+  e7000_fetch_registers ();
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+e7000_store_registers ()
+{
+  int regno;
+
+  for (regno = 0; regno < NUM_REALREGS; regno++)
+    e7000_store_register (regno);
+
+  registers_changed ();
+}
+
+/* Store register REGNO, or all if REGNO == 0.  Return errno value.  */
+
+static void
+e7000_store_register (regno)
+     int regno;
+{
+  char buf[200];
+
+  if (regno == -1)
+    {
+      e7000_store_registers ();
+      return;
+    }
+
+#ifdef GDB_TARGET_IS_H8300
+  if (regno <= 7)
+    {
+      sprintf (buf, ".ER%d %x\r", regno, read_register (regno));
+      puts_e7000debug (buf);
+    }
+  else if (regno == PC_REGNUM)
+    {
+      sprintf (buf, ".PC %x\r", read_register (regno));
+      puts_e7000debug (buf);
+    }
+  else if (regno == CCR_REGNUM)
+    {
+      sprintf (buf, ".CCR %x\r", read_register (regno));
+      puts_e7000debug (buf);
+    }
+#endif /* GDB_TARGET_IS_H8300 */
+
+#ifdef  GDB_TARGET_IS_SH
+  switch (regno)
+    {
+    default:
+      sprintf (buf, ".R%d %x\r", regno, read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case PC_REGNUM:
+      sprintf (buf, ".PC %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case SR_REGNUM:
+      sprintf (buf, ".SR %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case PR_REGNUM:
+      sprintf (buf, ".PR %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case GBR_REGNUM:
+      sprintf (buf, ".GBR %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case VBR_REGNUM:
+      sprintf (buf, ".VBR %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case MACH_REGNUM:
+      sprintf (buf, ".MACH %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+
+    case MACL_REGNUM:
+      sprintf (buf, ".MACL %x\r", read_register (regno));
+      puts_e7000debug (buf);
+      break;
+    }
+
+#endif /* GDB_TARGET_IS_SH */
+
+  expect_prompt ();
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+e7000_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+e7000_files_info ()
+{
+  printf_unfiltered ("\tAttached to %s at %d baud.\n", dev_name, baudrate);
+}
+
+static int
+stickbyte (where, what)
+     char *where;
+     unsigned int what;
+{
+  static CONST char digs[] = "0123456789ABCDEF";
+
+  where[0] = digs[(what >> 4) & 0xf];
+  where[1] = digs[(what & 0xf) & 0xf];
+
+  return what;
+}
+
+/* Write a small ammount of memory. */
+
+static int
+write_small (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int i;
+  char buf[200];
+
+  for (i = 0; i < len; i++)
+    {
+      if (((memaddr + i) & 3) == 0 && (i + 3 < len))
+	{
+	  /* Can be done with a long word */
+	  sprintf (buf, "m %x %x%02x%02x%02x;l\r",
+		   memaddr + i,
+		   myaddr[i], myaddr[i + 1], myaddr[i + 2], myaddr[i + 3]);
+	  puts_e7000debug (buf);
+	  i += 3;
+	}
+      else
+	{
+	  sprintf (buf, "m %x %x\r", memaddr + i, myaddr[i]);
+	  puts_e7000debug (buf);
+	}
+    }
+
+  expect_prompt ();
+
+  return len;
+}
+
+/* Write a large ammount of memory, this only works with the serial
+   mode enabled.  Command is sent as
+
+	il ;s:s\r	 ->
+			<- il ;s:s\r
+			<-  	ENQ
+	ACK		->
+			<- LO s\r
+	Srecords...
+	^Z		->
+			<-	ENQ
+	ACK		->  
+			<-	:   	
+  */
+
+static int
+write_large (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int i;
+#define maxstride  128
+  int stride;
+
+  puts_e7000debug ("IL ;S:FK\r");
+  expect (ENQSTRING);
+  putchar_e7000 (ACK);
+  expect ("LO FK\r");
+
+  for (i = 0; i < len; i += stride)
+    {
+      char compose[maxstride * 2 + 50];
+      int address = i + memaddr;
+      int j;
+      int check_sum;
+      int where = 0;
+      int alen;
+
+      stride = len - i;
+      if (stride > maxstride)
+	stride = maxstride;
+
+      compose[where++] = 'S';
+      check_sum = 0;
+      if (address >= 0xffffff)
+	alen = 4;
+      else if (address >= 0xffff)
+	alen = 3;
+      else
+	alen = 2;
+      /* Insert type. */
+      compose[where++] = alen - 1 + '0';
+      /* Insert length. */
+      check_sum += stickbyte (compose + where, alen + stride + 1);
+      where += 2;
+      while (alen > 0)
+	{
+	  alen--;
+	  check_sum += stickbyte (compose + where, address >> (8 * (alen)));
+	  where += 2;
+	}
+
+      for (j = 0; j < stride; j++)
+	{
+	  check_sum += stickbyte (compose + where, myaddr[i + j]);
+	  where += 2;
+	}
+      stickbyte (compose + where, ~check_sum);
+      where += 2;
+      compose[where++] = '\r';
+      compose[where++] = '\n';
+      compose[where++] = 0;
+
+      SERIAL_WRITE (e7000_desc, compose, where);
+      j = readchar (0);
+      if (j == -1)
+	{
+	  /* This is ok - nothing there */
+	}
+      else if (j == ENQ)
+	{
+	  /* Hmm, it's trying to tell us something */
+	  expect (":");
+	  error ("Error writing memory");
+	}
+      else
+	{
+	  printf_unfiltered ("@%d}@", j);
+	  while ((j = readchar (0)) > 0) 
+	    {
+	      printf_unfiltered ("@{%d}@",j);
+	    }
+	}
+    }
+
+  /* Send the trailer record */
+  write_e7000 ("S70500000000FA\r");
+  putchar_e7000 (CTRLZ);
+  expect (ENQSTRING);
+  putchar_e7000 (ACK);
+  expect (":");
+
+  return len;
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
+   memory at MEMADDR.  Returns length moved.
+
+   Can't use the Srecord load over ethernet, so don't use fast method
+   then.  */
+
+static int
+e7000_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  if (len < 16 || using_tcp || using_pc)
+    return write_small (memaddr, myaddr, len);
+  else
+    return write_large (memaddr, myaddr, len);
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns length moved. 
+
+  Small transactions we send
+  m <addr>;l
+  and receive
+    00000000 12345678 ?
+ */
+
+static int
+e7000_read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int count;
+  int c;
+  int i;
+  char buf[200];
+  /* Starting address of this pass.  */
+
+/*  printf("READ INF %x %x %d\n", memaddr, myaddr, len);*/
+  if (((memaddr - 1) + len) < memaddr)
+    {
+      errno = EIO;
+      return 0;
+    }
+
+  sprintf (buf, "m %x;l\r", memaddr);
+  puts_e7000debug (buf);
+
+  for (count = 0; count < len; count += 4) 
+    {
+      /* Suck away the address */
+      c = gch ();	
+      while (c != ' ')
+	c = gch ();	
+      c = gch ();
+      if (c == '*') 
+	{			/* Some kind of error */
+	  puts_e7000debug (".\r"); /* Some errors leave us in memory input mode */
+	  expect_full_prompt();
+	  return -1;
+	}
+      while (c != ' ')
+	c = gch ();	
+
+      /* Now read in the data */
+      for (i = 0; i < 4; i++) 
+	{
+	  int b = gbyte();
+	  if (count + i < len) {
+	    myaddr[count + i] = b;
+	  }
+	}
+
+      /* Skip the trailing ? and send a . to end and a cr for more */
+      gch ();	
+      gch ();
+      if (count + 4 >= len)
+	puts_e7000debug(".\r");
+      else
+	puts_e7000debug("\r");
+
+    }
+  expect_prompt();
+  return len;
+}
+
+
+
+/*
+  For large transfers we used to send
+
+
+  d <addr> <endaddr>\r
+
+  and receive
+   <ADDRESS>           <    D   A   T   A    >               <   ASCII CODE   >
+   00000000 5F FD FD FF DF 7F DF FF  01 00 01 00 02 00 08 04  "_..............."
+   00000010 FF D7 FF 7F D7 F1 7F FF  00 05 00 00 08 00 40 00  "..............@."
+   00000020 7F FD FF F7 7F FF FF F7  00 00 00 00 00 00 00 00  "................"
+
+  A cost in chars for each transaction of 80 + 5*n-bytes. 
+
+  Large transactions could be done with the srecord load code, but
+  there is a pause for a second before dumping starts, which slows the
+  average rate down!
+*/
+
+static int
+e7000_read_inferior_memory_large (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int count;
+  int c;
+  char buf[200];
+
+  /* Starting address of this pass.  */
+
+  if (((memaddr - 1) + len) < memaddr)
+    {
+      errno = EIO;
+      return 0;
+    }
+
+  sprintf (buf, "d %x %x\r", memaddr, memaddr + len - 1);
+  puts_e7000debug (buf);
+
+  count = 0;
+  c = gch ();
+  
+  /* skip down to the first ">" */
+  while( c != '>' )
+    c = gch ();
+  /* now skip to the end of that line */
+  while( c != '\r' )
+    c = gch ();
+  c = gch ();
+
+  while (count < len)
+    {
+      /* get rid of any white space before the address */
+      while (c <= ' ')
+	c = gch ();
+
+      /* Skip the address */
+      get_hex (&c);
+
+      /* read in the bytes on the line */
+      while (c != '"' && count < len)
+	{
+	  if (c == ' ')
+	    c = gch ();
+	  else
+	    {
+	      myaddr[count++] = get_hex (&c);
+	    }
+	}
+      /* throw out the rest of the line */
+      while( c != '\r' )
+	c = gch ();
+    }
+
+  /* wait for the ":" prompt */
+  while (c != ':')
+    c = gch ();
+
+  return len;
+}
+
+#if 0
+
+static int
+fast_but_for_the_pause_e7000_read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int loop;
+  int c;
+  char buf[200];
+
+  if (((memaddr - 1) + len) < memaddr)
+    {
+      errno = EIO;
+      return 0;
+    }
+
+  sprintf (buf, "is %x@%x:s\r", memaddr, len);
+  puts_e7000debug (buf);
+  gch ();
+  c = gch ();
+  if (c != ENQ)
+    {
+      /* Got an error */
+      error ("Memory read error");
+    }
+  putchar_e7000 (ACK);
+  expect ("SV s");
+  loop = 1;
+  while (loop)
+    {
+      int type;
+      int length;
+      int addr;
+      int i;
+
+      c = gch ();
+      switch (c)
+	{
+	case ENQ:		/* ENQ, at the end */
+	  loop = 0;
+	  break;
+	case 'S':
+	  /* Start of an Srecord */
+	  type = gch ();
+	  length = gbyte ();
+	  switch (type)
+	    {
+	    case '7':		/* Termination record, ignore */
+	    case '0':
+	    case '8':
+	    case '9':
+	      /* Header record - ignore it */
+	      while (length--)
+		{
+		  gbyte ();
+		}
+	      break;
+	    case '1':
+	    case '2':
+	    case '3':
+	      {
+		int alen;
+
+		alen = type - '0' + 1;
+		addr = 0;
+		while (alen--)
+		  {
+		    addr = (addr << 8) + gbyte ();
+		    length--;
+		  }
+
+		for (i = 0; i < length - 1; i++)
+		  myaddr[i + addr - memaddr] = gbyte ();
+
+		gbyte ();	/* Ignore checksum */
+	      }
+	    }
+	}
+    }
+
+  putchar_e7000 (ACK);
+  expect ("TOP ADDRESS =");
+  expect ("END ADDRESS =");
+  expect (":");
+
+  return len;
+}
+
+#endif
+
+static int
+e7000_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* ignored */
+{
+  if (write)
+    return e7000_write_inferior_memory( memaddr, myaddr, len);
+  else 
+    if( len < 16 )
+      return e7000_read_inferior_memory( memaddr, myaddr, len);
+    else
+      return e7000_read_inferior_memory_large( memaddr, myaddr, len);
+}
+
+static void
+e7000_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+}
+
+static void
+e7000_load (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct cleanup *old_chain;
+  asection *section;
+  bfd *pbfd;
+  bfd_vma entry;
+#define WRITESIZE 0x1000
+  char buf[2 + 4 + 4 + WRITESIZE]; /* `DT' + <addr> + <len> + <data> */
+  char *filename;
+  int quiet;
+  int nostart;
+  time_t start_time, end_time;	/* Start and end times of download */
+  unsigned long data_count;	/* Number of bytes transferred to memory */
+  int oldtimeout = timeout;	
+
+  timeout = remote_timeout;
+
+
+  /* FIXME! change test to test for type of download */
+  if (!using_tcp)
+    {
+      generic_load (args, from_tty);
+      return;
+    }
+
+  /* for direct tcp connections, we can do a fast binary download */
+  buf[0] = 'D';
+  buf[1] = 'T';
+  quiet = 0;
+  nostart = 0;
+  filename = NULL;
+
+  while (*args != '\000')
+    {
+      char *arg;
+
+      while (isspace (*args)) args++;
+
+      arg = args;
+
+      while ((*args != '\000') && !isspace (*args)) args++;
+
+      if (*args != '\000')
+	*args++ = '\000';
+
+      if (*arg != '-')
+	filename = arg;
+      else if (strncmp (arg, "-quiet", strlen (arg)) == 0)
+	quiet = 1;
+      else if (strncmp (arg, "-nostart", strlen (arg)) == 0)
+	nostart = 1;
+      else
+	error ("unknown option `%s'", arg);
+    }
+
+  if (!filename)
+    filename = get_exec_file (1);
+
+  pbfd = bfd_openr (filename, gnutarget);
+  if (pbfd == NULL)
+    {
+      perror_with_name (filename);
+      return;
+    }
+  old_chain = make_cleanup ((make_cleanup_func) bfd_close, pbfd);
+
+  if (!bfd_check_format (pbfd, bfd_object)) 
+    error ("\"%s\" is not an object file: %s", filename,
+	   bfd_errmsg (bfd_get_error ()));
+
+  start_time = time (NULL);
+  data_count = 0;
+
+  puts_e7000debug ("mw\r");
+
+  expect ("\nOK");
+
+  for (section = pbfd->sections; section; section = section->next) 
+    {
+      if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
+	{
+	  bfd_vma section_address;
+	  bfd_size_type section_size;
+	  file_ptr fptr;
+
+	  section_address = bfd_get_section_vma (pbfd, section);
+	  section_size = bfd_get_section_size_before_reloc (section);
+
+	  if (!quiet)
+	    printf_filtered ("[Loading section %s at 0x%x (%d bytes)]\n",
+			     bfd_get_section_name (pbfd, section),
+			     section_address,
+			     section_size);
+
+	  fptr = 0;
+	  
+	  data_count += section_size;
+
+	  while (section_size > 0)
+	    {
+	      int count;
+	      static char inds[] = "|/-\\";
+	      static int k = 0;
+
+	      QUIT;
+
+	      count = min (section_size, WRITESIZE);
+
+	      buf[2] = section_address >> 24;
+	      buf[3] = section_address >> 16;
+	      buf[4] = section_address >> 8;
+	      buf[5] = section_address;
+
+	      buf[6] = count >> 24;
+	      buf[7] = count >> 16;
+	      buf[8] = count >> 8;
+	      buf[9] = count;
+
+	      bfd_get_section_contents (pbfd, section, buf + 10, fptr, count);
+
+	      if (SERIAL_WRITE (e7000_desc, buf, count + 10))
+		fprintf_unfiltered (gdb_stderr,
+				    "e7000_load: SERIAL_WRITE failed: %s\n",
+				    safe_strerror(errno));
+
+	      expect ("OK");
+
+	      if (!quiet)
+		{
+		  printf_unfiltered ("\r%c", inds[k++ % 4]);
+		  gdb_flush (gdb_stdout);
+		}
+
+	      section_address += count;
+	      fptr += count;
+	      section_size -= count;
+	    }
+	}
+    }
+
+  write_e7000 ("ED");
+
+  expect_prompt ();
+
+  end_time = time (NULL);
+
+/* Finally, make the PC point at the start address */
+
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;		/* No process now */
+
+/* This is necessary because many things were based on the PC at the time that
+   we attached to the monitor, which is no longer valid now that we have loaded
+   new code (and just changed the PC).  Another way to do this might be to call
+   normal_stop, except that the stack may not be valid, and things would get
+   horribly confused... */
+
+  clear_symtab_users ();
+
+  if (!nostart)
+    {
+      entry = bfd_get_start_address (pbfd);
+
+      if (!quiet)
+	printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+
+/*      start_routine (entry);*/
+    }
+
+  report_transfer_performance (data_count, start_time, end_time);
+
+  do_cleanups (old_chain);
+  timeout = oldtimeout;
+}
+
+/* Clean up when a program exits.
+
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+e7000_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&e7000_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define MAX_BREAKPOINTS 200
+#ifdef  HARD_BREAKPOINTS
+#define MAX_E7000DEBUG_BREAKPOINTS (BC_BREAKPOINTS ? 5 :  MAX_BREAKPOINTS)
+#else
+#define MAX_E7000DEBUG_BREAKPOINTS MAX_BREAKPOINTS
+#endif
+
+/* Since we can change to soft breakpoints dynamically, we must define 
+   more than enough.  Was breakaddr[MAX_E7000DEBUG_BREAKPOINTS]. */
+static CORE_ADDR breakaddr[MAX_BREAKPOINTS] = {0};
+
+static int
+e7000_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     unsigned char *shadow;
+{
+  int i;
+  char buf[200];
+#if 0
+  static char nop[2] = NOP;
+#endif
+
+  for (i = 0; i <= MAX_E7000DEBUG_BREAKPOINTS; i++)
+    if (breakaddr[i] == 0)
+      {
+	breakaddr[i] = addr;
+	/* Save old contents, and insert a nop in the space */
+#ifdef HARD_BREAKPOINTS
+	if (BC_BREAKPOINTS) 
+	  {
+	    sprintf (buf, "BC%d A=%x\r", i+1, addr);
+	    puts_e7000debug (buf);
+	  }
+	else 
+	  {
+	    sprintf (buf, "B %x\r", addr);
+	    puts_e7000debug (buf);
+	  }
+#else
+#if 0
+	e7000_read_inferior_memory (addr, shadow, 2);
+	e7000_write_inferior_memory (addr, nop, 2);
+#endif
+
+	sprintf (buf, "B %x\r", addr);
+	puts_e7000debug (buf);
+#endif
+	expect_prompt ();
+	return 0;
+      }
+
+  error ("Too many breakpoints ( > %d) for the E7000\n",
+	 MAX_E7000DEBUG_BREAKPOINTS);
+  return 1;
+}
+
+static int
+e7000_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     unsigned char *shadow;
+{
+  int i;
+  char buf[200];
+
+  for (i = 0; i < MAX_E7000DEBUG_BREAKPOINTS; i++)
+    if (breakaddr[i] == addr)
+      {
+	breakaddr[i] = 0;
+#ifdef HARD_BREAKPOINTS
+	if (BC_BREAKPOINTS) 
+	  {
+	    sprintf (buf, "BC%d - \r",  i+1);
+	    puts_e7000debug (buf);
+	  }
+	else 
+	  {
+	    sprintf (buf, "B - %x\r",  addr);
+	    puts_e7000debug (buf);
+	  }
+	expect_prompt ();
+#else
+	sprintf (buf, "B - %x\r", addr);
+	puts_e7000debug (buf);
+	expect_prompt ();
+
+#if 0
+	/* Replace the insn under the break */
+	e7000_write_inferior_memory (addr, shadow, 2);
+#endif
+#endif
+
+	return 0;
+      }
+
+  warning ("Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+/* Put a command string, in args, out to STDBUG.  Output from STDBUG
+   is placed on the users terminal until the prompt is seen. */
+
+static void
+e7000_command (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  /* FIXME: arbitrary limit on length of args.  */
+  char buf[200];
+
+  echo = 0;
+
+  if (!e7000_desc)
+    error ("e7000 target not open.");
+  if (!args)
+    {
+      puts_e7000debug ("\r");
+    }
+  else
+    {
+      sprintf (buf, "%s\r", args);
+      puts_e7000debug (buf);
+    }
+
+  echo++;
+  ctrl_c = 2;
+  expect_full_prompt ();
+  echo--;
+  ctrl_c = 0;
+  printf_unfiltered ("\n");
+
+  /* Who knows what the command did... */
+  registers_changed ();
+}
+
+
+static void
+e7000_drain_command (args, fromtty)
+     char *args;
+     int fromtty;
+
+{
+  int c;
+
+  puts_e7000debug("end\r");
+  putchar_e7000 (CTRLC);
+
+  while ((c = readchar (1) != -1))
+    {
+      if (quit_flag)
+	{
+	  putchar_e7000(CTRLC);
+	  quit_flag = 0;
+	}
+      if (c > ' ' && c < 127)
+	printf_unfiltered ("%c", c & 0xff);
+      else
+	printf_unfiltered ("<%x>", c & 0xff);
+    }
+}
+
+#define NITEMS 7
+
+static int
+why_stop ()
+{
+  static  char *strings[NITEMS] = {
+    "STEP NORMAL",
+    "BREAK POINT",
+    "BREAK KEY",
+    "BREAK CONDI",
+    "CYCLE ACCESS",
+    "ILLEGAL INSTRUCTION",
+    "WRITE PROTECT",
+  };
+  char *p[NITEMS];
+  int c;
+  int i;
+
+  for (i = 0; i < NITEMS; ++i)
+    p[i] = strings[i];
+  
+  c = gch ();
+  while (1)
+    {
+      for (i = 0; i < NITEMS; i++)
+	{
+	  if (c == *(p[i])) 
+	    {
+	      p[i]++;
+	      if (*(p[i]) == 0) 
+		{ 
+		  /* found one of the choices */
+		  return i;
+		}
+	    }
+	  else
+	    p[i] = strings[i];
+	}
+
+      c = gch ();
+    }
+}
+
+/* Suck characters, if a string match, then return the strings index
+   otherwise echo them.  */
+
+int
+expect_n (strings)
+char **strings;
+{
+  char *(ptr[10]);
+  int n; 
+  int c;
+  char saveaway[100];
+  char *buffer = saveaway;
+  /* Count number of expect strings  */
+
+  for (n = 0; strings[n]; n++) 
+    {
+      ptr[n] = strings[n];
+    }
+
+  while (1)
+    {
+      int i;
+      int gotone = 0;
+
+      c = readchar (1);
+      if (c == -1)
+	{
+	  printf_unfiltered ("[waiting for e7000...]\n");
+	}
+#ifdef __GO32__
+      if (kbhit ())
+	{
+	  int k = getkey();
+
+	  if (k == 1)
+	    quit_flag = 1;
+	}
+#endif
+      if (quit_flag)
+	{
+	  putchar_e7000 (CTRLC);	/* interrupt the running program */
+	  quit_flag = 0;
+	}
+
+      for (i = 0; i < n; i++)
+	{
+	  if (c == ptr[i][0]) 
+	    {
+	      ptr[i]++;
+	      if (ptr[i][0] == 0)
+		{
+		  /* Gone all the way */
+		  return i;
+		}
+	      gotone = 1;
+	    }
+	  else
+	    {
+	      ptr[i] = strings[i];
+	    }
+	}
+    
+      if (gotone)
+	{
+	  /* Save it up incase we find that there was no match */
+	  *buffer ++ = c;
+	}
+      else
+	{
+	  if (buffer != saveaway) 
+	    {
+	      *buffer++ = 0;
+	      printf_unfiltered ("%s", buffer);
+	      buffer = saveaway;
+	    }
+	  if (c != -1)
+	    {
+	      putchar_unfiltered (c);
+	      gdb_flush (gdb_stdout);
+	    }
+	}
+    }
+}
+
+/* We subtract two from the pc here rather than use
+   DECR_PC_AFTER_BREAK since the e7000 doesn't always add two to the
+   pc, and the simulators never do. */
+
+static void
+sub2_from_pc ()
+{
+  char buf[4];
+  char buf2[200];
+
+  store_signed_integer (buf,
+			REGISTER_RAW_SIZE(PC_REGNUM), 
+			read_register (PC_REGNUM) -2);
+  supply_register (PC_REGNUM, buf);
+  sprintf (buf2, ".PC %x\r", read_register (PC_REGNUM));
+  puts_e7000debug (buf2);
+}
+
+#define WAS_SLEEP 0
+#define WAS_INT 1
+#define WAS_RUNNING 2
+#define WAS_OTHER 3
+
+static char *estrings[] = {
+  "** SLEEP",
+  "BREAK !",
+  "** PC",
+  "PC",
+  NULL
+};
+
+/* Wait until the remote machine stops, then return, storing status in
+   STATUS just as `wait' would.  */
+
+static int
+e7000_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int stop_reason;
+  int regno;
+  int running_count = 0;
+  int had_sleep = 0;
+  int loop = 1;
+  char *wanted_nopc;
+
+  /* Then echo chars until PC= string seen */
+  gch ();			/* Drop cr */
+  gch ();			/* and space */
+
+  while (loop)
+    {
+      switch (expect_n (estrings))
+	{	 
+	case WAS_OTHER:
+	  /* how did this happen ? */
+	  loop = 0;
+	  break;
+	case WAS_SLEEP:
+	  had_sleep = 1;
+	  putchar_e7000 (CTRLC);
+	  loop = 0;
+	  break;
+	case WAS_INT:
+	  loop = 0;
+	  break;
+	case WAS_RUNNING:
+	  running_count++;
+	  if (running_count == 20)
+	    {
+	      printf_unfiltered ("[running...]\n");
+	      running_count = 0;
+	    }
+	  break;
+	default:
+	  /* error? */
+	  break;
+	}
+    }
+
+  /* Skip till the PC= */
+  expect ("=");
+
+#ifdef GDB_TARGET_IS_SH
+  wanted_nopc = want_nopc;
+  if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
+    switch (TARGET_ARCHITECTURE->mach)
+      {
+      case bfd_mach_sh3:
+      case bfd_mach_sh3e:
+	wanted_nopc = want_sh3_nopc;
+      }
+#else
+  if (h8300smode)
+    wanted_nopc = want_nopc_h8300s;
+  else
+    wanted_nopc = want_nopc_h8300h;
+#endif
+  fetch_regs_from_dump (gch, wanted_nopc);
+
+  /* And supply the extra ones the simulator uses */
+  for (regno = NUM_REALREGS; regno < NUM_REGS; regno++)
+    {
+      int buf = 0;
+      supply_register (regno, (char *) &buf);
+    }
+
+  stop_reason = why_stop ();
+  expect_full_prompt ();
+
+  status->kind = TARGET_WAITKIND_STOPPED;
+  status->value.sig = TARGET_SIGNAL_TRAP;
+
+  switch (stop_reason)
+    {
+    case 1:			/* Breakpoint */
+      write_pc (read_pc ()); /* PC is always off by 2 for breakpoints */
+      status->value.sig = TARGET_SIGNAL_TRAP;      
+      break;
+    case 0:			/* Single step */
+      status->value.sig = TARGET_SIGNAL_TRAP;      
+      break;
+    case 2:			/* Interrupt */
+      if (had_sleep)
+	{
+	  status->value.sig = TARGET_SIGNAL_TRAP;      
+	  sub2_from_pc ();
+	}
+      else
+	{
+	  status->value.sig = TARGET_SIGNAL_INT;      
+	}
+      break;
+    case 3:
+      break;
+    case 4:
+      printf_unfiltered ("a cycle address error?\n");
+      status->value.sig = TARGET_SIGNAL_UNKNOWN;      
+      break;
+    case 5:
+      status->value.sig = TARGET_SIGNAL_ILL;      
+      break;
+    case 6:
+      status->value.sig = TARGET_SIGNAL_SEGV;      
+      break;
+    case 7:			/* Anything else (NITEMS + 1) */
+      printf_unfiltered ("a write protect error?\n");
+      status->value.sig = TARGET_SIGNAL_UNKNOWN;      
+      break;
+    default:
+      /* Get the user's attention - this should never happen. */
+      abort ();
+    }
+
+  return 0;
+}
+
+/* Stop the running program.  */
+
+static void
+e7000_stop ()  
+{
+  /* Sending a ^C is supposed to stop the running program.  */
+  putchar_e7000 (CTRLC);
+}
+
+/* Define the target subroutine names. */
+
+struct target_ops e7000_ops ;
+
+static void 
+init_e7000_ops(void)
+{
+  e7000_ops.to_shortname =   "e7000";
+  e7000_ops.to_longname =   "Remote Hitachi e7000 target";
+  e7000_ops.to_doc =   "Use a remote Hitachi e7000 ICE connected by a serial line;\n\
+or a network connection.\n\
+Arguments are the name of the device for the serial line,\n\
+the speed to connect at in bits per second.\n\
+eg\n\
+target e7000 /dev/ttya 9600\n\
+target e7000 foobar" ;
+  e7000_ops.to_open =   e7000_open;	
+  e7000_ops.to_close =   e7000_close;	
+  e7000_ops.to_attach =   0;
+  e7000_ops.to_post_attach = NULL;
+  e7000_ops.to_require_attach = NULL;	
+  e7000_ops.to_detach =   e7000_detach;
+  e7000_ops.to_require_detach = NULL;	
+  e7000_ops.to_resume =   e7000_resume;	
+  e7000_ops.to_wait  =   e7000_wait;
+  e7000_ops.to_post_wait = NULL;	
+  e7000_ops.to_fetch_registers  =   e7000_fetch_register;
+  e7000_ops.to_store_registers  =   e7000_store_register;
+  e7000_ops.to_prepare_to_store =   e7000_prepare_to_store;
+  e7000_ops.to_xfer_memory  =   e7000_xfer_inferior_memory;
+  e7000_ops.to_files_info  =   e7000_files_info;		
+  e7000_ops.to_insert_breakpoint =   e7000_insert_breakpoint;	
+  e7000_ops.to_remove_breakpoint =   e7000_remove_breakpoint;	
+  e7000_ops.to_terminal_init  =   0;				
+  e7000_ops.to_terminal_inferior =   0;				
+  e7000_ops.to_terminal_ours_for_output =   0;			
+  e7000_ops.to_terminal_ours  =   0;				
+  e7000_ops.to_terminal_info  =   0;				
+  e7000_ops.to_kill  =   e7000_kill;		
+  e7000_ops.to_load  =   e7000_load;		
+  e7000_ops.to_lookup_symbol =   0;		
+  e7000_ops.to_create_inferior =   e7000_create_inferior;
+  e7000_ops.to_post_startup_inferior = NULL;
+  e7000_ops.to_acknowledge_created_inferior = NULL;
+  e7000_ops.to_clone_and_follow_inferior = NULL;          
+  e7000_ops.to_post_follow_inferior_by_clone = NULL;  
+  e7000_ops.to_insert_fork_catchpoint = NULL;
+  e7000_ops.to_remove_fork_catchpoint = NULL;
+  e7000_ops.to_insert_vfork_catchpoint = NULL;
+  e7000_ops.to_remove_vfork_catchpoint = NULL;                      
+  e7000_ops.to_has_forked = NULL;
+  e7000_ops.to_has_vforked = NULL;
+  e7000_ops.to_can_follow_vfork_prior_to_exec = NULL;                        
+  e7000_ops.to_post_follow_vfork = NULL;
+  e7000_ops.to_insert_exec_catchpoint = NULL;
+  e7000_ops.to_remove_exec_catchpoint = NULL;
+  e7000_ops.to_has_execd = NULL;
+  e7000_ops.to_reported_exec_events_per_exec_call = NULL;
+  e7000_ops.to_has_exited = NULL;
+  e7000_ops.to_mourn_inferior =   e7000_mourn_inferior;		
+  e7000_ops.to_can_run  =   0;			
+  e7000_ops.to_notice_signals =   0;		
+  e7000_ops.to_thread_alive  =   0;		
+  e7000_ops.to_stop  =   e7000_stop;
+  e7000_ops.to_pid_to_exec_file = NULL;	
+  e7000_ops.to_core_file_to_sym_file = NULL;
+  e7000_ops.to_stratum =   process_stratum;	
+  e7000_ops.DONT_USE =   0;			
+  e7000_ops.to_has_all_memory =   1;		
+  e7000_ops.to_has_memory =   1;		
+  e7000_ops.to_has_stack =   1;			
+  e7000_ops.to_has_registers =   1;		
+  e7000_ops.to_has_execution =   1;		
+  e7000_ops.to_sections =   0;			
+  e7000_ops.to_sections_end =   0;		
+  e7000_ops.to_magic =   OPS_MAGIC;		
+};
+
+void
+_initialize_remote_e7000 ()
+{
+  init_e7000_ops() ;
+  add_target (&e7000_ops);
+
+  add_com ("e7000", class_obscure, e7000_command,
+	   "Send a command to the e7000 monitor.");
+
+  add_com ("ftplogin", class_obscure, e7000_login_command,
+	   "Login to machine and change to directory.");
+
+  add_com ("ftpload", class_obscure, e7000_ftp_command,
+	   "Fetch and load a file from previously described place.");
+
+  add_com ("drain", class_obscure, e7000_drain_command,
+	   "Drain pending e7000 text buffers.");
+
+  add_show_from_set (add_set_cmd ("usehardbreakpoints", no_class,
+				  var_integer, (char *)&use_hard_breakpoints,
+				  "Set use of hardware breakpoints for all breakpoints.\n", &setlist),
+		     &showlist);
+}
diff --git a/gdb/remote-eb.c b/gdb/remote-eb.c
new file mode 100644
index 0000000..d3a3c41
--- /dev/null
+++ b/gdb/remote-eb.c
@@ -0,0 +1,1056 @@
+/* Remote debugging interface for AMD 29000 EBMON on IBM PC, for GDB.
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Jim Kingdon for Cygnus.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is like remote.c but is for an esoteric situation--
+   having a a29k board in a PC hooked up to a unix machine with
+   a serial line, and running ctty com1 on the PC, through which
+   the unix machine can run ebmon.  Not to mention that the PC
+   has PC/NFS, so it can access the same executables that gdb can,
+   over the net in real time.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "wait.h"
+#include "value.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <errno.h>
+#include "terminal.h"
+#include "target.h"
+#include "gdbcore.h"
+
+extern struct target_ops eb_ops;		/* Forward declaration */
+
+static void eb_close();
+
+#define LOG_FILE "eb.log"
+#if defined (LOG_FILE)
+FILE *log_file;
+#endif
+
+static int timeout = 24;
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   eb_open knows that we don't have a file open when the program
+   starts.  */
+int eb_desc = -1;
+
+/* stream which is fdopen'd from eb_desc.  Only valid when
+   eb_desc != -1.  */
+FILE *eb_stream;
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+static int
+readchar ()
+{
+  char buf;
+
+  buf = '\0';
+#ifdef HAVE_TERMIO
+  /* termio does the timeout for us.  */
+  read (eb_desc, &buf, 1);
+#else
+  alarm (timeout);
+  if (read (eb_desc, &buf, 1) < 0)
+    {
+      if (errno == EINTR)
+	error ("Timeout reading from remote system.");
+      else
+	perror_with_name ("remote");
+    }
+  alarm (0);
+#endif
+
+  if (buf == '\0')
+    error ("Timeout reading from remote system.");
+#if defined (LOG_FILE)
+  putc (buf & 0x7f, log_file);
+#endif
+  return buf & 0x7f;
+}
+
+/* Keep discarding input from the remote system, until STRING is found. 
+   Let the user break out immediately.  */
+static void
+expect (string)
+     char *string;
+{
+  char *p = string;
+
+  immediate_quit = 1;
+  while (1)
+    {
+      if (readchar() == *p)
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      return;
+	    }
+	}
+      else
+	p = string;
+    }
+}
+
+/* Keep discarding input until we see the ebmon prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  eb_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a eb_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt ()
+{
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush (log_file);
+#endif
+  expect ("\n# ");
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit (ignore_space)
+     int ignore_space;
+{
+  int ch;
+  while (1)
+    {
+      ch = readchar ();
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt ();
+	  error ("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from eb_desc and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Get N 32-bit words from remote, each preceded by a space,
+   and put them in registers starting at REGNO.  */
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+  long val;
+  int i;
+
+  for (i = 0; i < n; i++)
+    {
+      int j;
+      
+      val = 0;
+      for (j = 0; j < 8; j++)
+	val = (val << 4) + get_hex_digit (j == 0);
+      supply_register (regno++, (char *) &val);
+    }
+}
+
+/* Called when SIGALRM signal sent due to alarm() timeout.  */
+#ifndef HAVE_TERMIO
+
+#ifndef __STDC__
+#define volatile /**/
+#endif
+volatile int n_alarms;
+
+void
+eb_timer ()
+{
+#if 0
+  if (kiodebug)
+    printf ("eb_timer called\n");
+#endif
+  n_alarms++;
+}
+#endif
+
+/* malloc'd name of the program on the remote system.  */
+static char *prog_name = NULL;
+
+/* Nonzero if we have loaded the file ("yc") and not yet issued a "gi"
+   command.  "gi" is supposed to happen exactly once for each "yc".  */
+static int need_gi = 0;
+
+/* Number of SIGTRAPs we need to simulate.  That is, the next
+   NEED_ARTIFICIAL_TRAP calls to eb_wait should just return
+   SIGTRAP without actually waiting for anything.  */
+
+static int need_artificial_trap = 0;
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+eb_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error ("Can't pass arguments to remote EBMON process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  {
+    /* OK, now read in the file.  Y=read, C=COFF, D=no symbols
+       0=start address, %s=filename.  */
+
+    fprintf (eb_stream, "YC D,0:%s", prog_name);
+
+    if (args != NULL)
+	fprintf(eb_stream, " %s", args);
+
+    fprintf (eb_stream, "\n");
+    fflush (eb_stream);
+
+    expect_prompt ();
+
+    need_gi = 1;
+  }
+
+/* The "process" (board) is already stopped awaiting our commands, and
+   the program is already downloaded.  We just set its PC and go.  */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);		/* Let 'er rip... */
+}
+
+/* Translate baud rates from integers to damn B_codes.  Unix should
+   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
+
+#ifndef B19200
+#define B19200 EXTA
+#endif
+#ifndef B38400
+#define B38400 EXTB
+#endif
+
+struct {int rate, damn_b;} baudtab[] = {
+	{0, B0},
+	{50, B50},
+	{75, B75},
+	{110, B110},
+	{134, B134},
+	{150, B150},
+	{200, B200},
+	{300, B300},
+	{600, B600},
+	{1200, B1200},
+	{1800, B1800},
+	{2400, B2400},
+	{4800, B4800},
+	{9600, B9600},
+	{19200, B19200},
+	{38400, B38400},
+	{-1, -1},
+};
+
+int damn_b (rate)
+     int rate;
+{
+  int i;
+
+  for (i = 0; baudtab[i].rate != -1; i++)
+    if (rate == baudtab[i].rate) return baudtab[i].damn_b;
+  return B38400;	/* Random */
+}
+
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication, then a space,
+   then the name of the program as we should name it to EBMON.  */
+
+static int baudrate = 9600;
+static char *dev_name;
+void
+eb_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  TERMINAL sg;
+
+  char *p;
+
+  target_preopen (from_tty);
+  
+  /* Find the first whitespace character, it separates dev_name from
+     prog_name.  */
+  if (name == 0)
+    goto erroid;
+
+  for (p = name;
+       *p != '\0' && !isspace (*p); p++)
+    ;
+  if (*p == '\0')
+erroid:
+    error ("\
+Please include the name of the device for the serial port,\n\
+the baud rate, and the name of the program to run on the remote system.");
+  dev_name = alloca (p - name + 1);
+  strncpy (dev_name, name, p - name);
+  dev_name[p - name] = '\0';
+
+  /* Skip over the whitespace after dev_name */
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (1 != sscanf (p, "%d ", &baudrate))
+    goto erroid;
+
+  /* Skip the number and then the spaces */
+  for (; isdigit (*p); p++)
+    /*EMPTY*/;
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (prog_name != NULL)
+    free (prog_name);
+  prog_name = savestring (p, strlen (p));
+
+  eb_close (0);
+
+  eb_desc = open (dev_name, O_RDWR);
+  if (eb_desc < 0)
+    perror_with_name (dev_name);
+  ioctl (eb_desc, TIOCGETP, &sg);
+#ifdef HAVE_TERMIO
+  sg.c_cc[VMIN] = 0;		/* read with timeout.  */
+  sg.c_cc[VTIME] = timeout * 10;
+  sg.c_lflag &= ~(ICANON | ECHO);
+  sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);
+#else
+  sg.sg_ispeed = damn_b (baudrate);
+  sg.sg_ospeed = damn_b (baudrate);
+  sg.sg_flags |= RAW | ANYP;
+  sg.sg_flags &= ~ECHO;
+#endif
+
+  ioctl (eb_desc, TIOCSETP, &sg);
+  eb_stream = fdopen (eb_desc, "r+");
+
+  push_target (&eb_ops);
+  if (from_tty)
+    printf ("Remote %s debugging %s using %s\n", target_shortname,
+	    prog_name, dev_name);
+
+#ifndef HAVE_TERMIO
+#ifndef NO_SIGINTERRUPT
+  /* Cause SIGALRM's to make reads fail with EINTR instead of resuming
+     the read.  */
+  if (siginterrupt (SIGALRM, 1) != 0)
+    perror ("eb_open: error in siginterrupt");
+#endif
+
+  /* Set up read timeout timer.  */
+  if ((void (*)) signal (SIGALRM, eb_timer) == (void (*)) -1)
+    perror ("eb_open: error in signal");
+#endif
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+#endif
+
+  /* Hello?  Are you there?  */
+  write (eb_desc, "\n", 1);
+  
+  expect_prompt ();
+}
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+eb_close (quitting)
+     int quitting;
+{
+
+  /* Due to a bug in Unix, fclose closes not only the stdio stream,
+     but also the file descriptor.  So we don't actually close
+     eb_desc.  */
+  if (eb_stream)
+    fclose (eb_stream);	/* This also closes eb_desc */
+  if (eb_desc >= 0)
+    /* close (eb_desc); */
+
+  /* Do not try to close eb_desc again, later in the program.  */
+  eb_stream = NULL;
+  eb_desc = -1;
+
+#if defined (LOG_FILE)
+  if (log_file) {
+    if (ferror (log_file))
+      printf ("Error writing log file.\n");
+    if (fclose (log_file) != 0)
+      printf ("Error closing log file.\n");
+  }
+#endif
+}
+
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+void
+eb_detach (from_tty)
+     int from_tty;
+{
+  pop_target();		/* calls eb_close to do the real work */
+  if (from_tty)
+    printf ("Ending remote %s debugging\n", target_shortname);
+}
+ 
+/* Tell the remote machine to resume.  */
+
+void
+eb_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  if (step)
+    {
+      write (eb_desc, "t 1,s\n", 6);
+      /* Wait for the echo.  */
+      expect ("t 1,s\r");
+      /* Then comes a line containing the instruction we stepped to.  */
+      expect ("\n@");
+      /* Then we get the prompt.  */
+      expect_prompt ();
+
+      /* Force the next eb_wait to return a trap.  Not doing anything
+         about I/O from the target means that the user has to type
+         "continue" to see any.  This should be fixed.  */
+      need_artificial_trap = 1;
+    }
+  else
+    {
+      if (need_gi)
+	{
+	  need_gi = 0;
+	  write (eb_desc, "gi\n", 3);
+	  
+	  /* Swallow the echo of "gi".  */
+	  expect ("gi\r");
+	}
+      else
+	{
+	  write (eb_desc, "GR\n", 3);
+	  /* Swallow the echo.  */
+	  expect ("GR\r");
+	}
+    }
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+int
+eb_wait (status)
+     struct target_waitstatus *status;
+{
+  /* Strings to look for.  '?' means match any single character.  
+     Note that with the algorithm we use, the initial character
+     of the string cannot recur in the string, or we will not
+     find some cases of the string in the input.  */
+  
+  static char bpt[] = "Invalid interrupt taken - #0x50 - ";
+  /* It would be tempting to look for "\n[__exit + 0x8]\n"
+     but that requires loading symbols with "yc i" and even if
+     we did do that we don't know that the file has symbols.  */
+  static char exitmsg[] = "\n@????????I    JMPTI     GR121,LR0";
+  char *bp = bpt;
+  char *ep = exitmsg;
+
+  /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars.  */
+  char swallowed[50];
+  /* Current position in swallowed.  */
+  char *swallowed_p = swallowed;
+
+  int ch;
+  int ch_handled;
+
+  int old_timeout = timeout;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  if (need_artificial_trap != 0)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      need_artificial_trap--;
+      return 0;
+    }
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+  while (1)
+    {
+      ch_handled = 0;
+      ch = readchar ();
+      if (ch == *bp)
+	{
+	  bp++;
+	  if (*bp == '\0')
+	    break;
+	  ch_handled = 1;
+
+	  *swallowed_p++ = ch;
+	}
+      else
+	bp = bpt;
+
+      if (ch == *ep || *ep == '?')
+	{
+	  ep++;
+	  if (*ep == '\0')
+	    break;
+
+	  if (!ch_handled)
+	    *swallowed_p++ = ch;
+	  ch_handled = 1;
+	}
+      else
+	ep = exitmsg;
+
+      if (!ch_handled)
+	{
+	  char *p;
+
+	  /* Print out any characters which have been swallowed.  */
+	  for (p = swallowed; p < swallowed_p; ++p)
+	    putc (*p, stdout);
+	  swallowed_p = swallowed;
+	  
+	  putc (ch, stdout);
+	}
+    }
+  expect_prompt ();
+  if (*bp== '\0')
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+    }
+  else
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = 0;
+    }
+  timeout = old_timeout;
+
+  return 0;
+}
+
+/* Return the name of register number REGNO
+   in the form input and output by EBMON.
+
+   Returns a pointer to a static buffer containing the answer.  */
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char buf[80];
+  if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
+    sprintf (buf, "GR%03d", regno - GR96_REGNUM + 96);
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+    sprintf (buf, "LR%03d", regno - LR0_REGNUM);
+  else if (regno == Q_REGNUM)
+    strcpy (buf, "SR131");
+  else if (regno >= BP_REGNUM && regno <= CR_REGNUM)
+    sprintf (buf, "SR%03d", regno - BP_REGNUM + 133);
+  else if (regno == ALU_REGNUM)
+    strcpy (buf, "SR132");
+  else if (regno >= IPC_REGNUM && regno <= IPB_REGNUM)
+    sprintf (buf, "SR%03d", regno - IPC_REGNUM + 128);
+  else if (regno >= VAB_REGNUM && regno <= LRU_REGNUM)
+    sprintf (buf, "SR%03d", regno - VAB_REGNUM);
+  else if (regno == GR1_REGNUM)
+    strcpy (buf, "GR001");
+  return buf;
+}
+
+/* Read the remote registers into the block REGS.  */
+
+static void
+eb_fetch_registers ()
+{
+  int reg_index;
+  int regnum_index;
+  char tempbuf[10];
+  int i;
+
+#if 0
+  /* This should not be necessary, because one is supposed to read the
+     registers only when the inferior is stopped (at least with
+     ptrace() and why not make it the same for remote?).  */
+  /* ^A is the "normal character" used to make sure we are talking to EBMON
+     and not to the program being debugged.  */
+  write (eb_desc, "\001\n");
+  expect_prompt ();
+#endif
+
+  write (eb_desc, "dw gr96,gr127\n", 14);
+  for (reg_index = 96, regnum_index = GR96_REGNUM;
+       reg_index < 128;
+       reg_index += 4, regnum_index += 4)
+    {
+      sprintf (tempbuf, "GR%03d ", reg_index);
+      expect (tempbuf);
+      get_hex_regs (4, regnum_index);
+      expect ("\n");
+    }
+
+  for (i = 0; i < 128; i += 32)
+    {
+      /* The PC has a tendency to hang if we get these
+	 all in one fell swoop ("dw lr0,lr127").  */
+      sprintf (tempbuf, "dw lr%d\n", i);
+      write (eb_desc, tempbuf, strlen (tempbuf));
+      for (reg_index = i, regnum_index = LR0_REGNUM + i;
+	   reg_index < i + 32;
+	   reg_index += 4, regnum_index += 4)
+	{
+	  sprintf (tempbuf, "LR%03d ", reg_index);
+	  expect (tempbuf);
+	  get_hex_regs (4, regnum_index);
+	  expect ("\n");
+	}
+    }
+
+  write (eb_desc, "dw sr133,sr133\n", 15);
+  expect ("SR133          ");
+  get_hex_regs (1, BP_REGNUM);
+  expect ("\n");
+
+  write (eb_desc, "dw sr134,sr134\n", 15);
+  expect ("SR134                   ");
+  get_hex_regs (1, FC_REGNUM);
+  expect ("\n");
+
+  write (eb_desc, "dw sr135,sr135\n", 15);
+  expect ("SR135                            ");
+  get_hex_regs (1, CR_REGNUM);
+  expect ("\n");
+
+  write (eb_desc, "dw sr131,sr131\n", 15);
+  expect ("SR131                            ");
+  get_hex_regs (1, Q_REGNUM);
+  expect ("\n");
+
+  write (eb_desc, "dw sr0,sr14\n", 12);
+  for (reg_index = 0, regnum_index = VAB_REGNUM;
+       regnum_index <= LRU_REGNUM;
+       regnum_index += 4, reg_index += 4)
+    {
+      sprintf (tempbuf, "SR%03d ", reg_index);
+      expect (tempbuf);
+      get_hex_regs (reg_index == 12 ? 3 : 4, regnum_index);
+      expect ("\n");
+    }
+
+  /* There doesn't seem to be any way to get these.  */
+  {
+    int val = -1;
+    supply_register (FPE_REGNUM, (char *) &val);
+    supply_register (INTE_REGNUM, (char *) &val);
+    supply_register (FPS_REGNUM, (char *) &val);
+    supply_register (EXO_REGNUM, (char *) &val);
+  }
+
+  write (eb_desc, "dw gr1,gr1\n", 11);
+  expect ("GR001 ");
+  get_hex_regs (1, GR1_REGNUM);
+  expect_prompt ();
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.
+   Returns errno value.  */
+void
+eb_fetch_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    eb_fetch_registers ();
+  else
+    {
+      char *name = get_reg_name (regno);
+      fprintf (eb_stream, "dw %s,%s\n", name, name);
+      expect (name);
+      expect (" ");
+      get_hex_regs (1, regno);
+      expect_prompt ();
+    }
+  return;
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+eb_store_registers ()
+{
+  int i, j;
+  fprintf (eb_stream, "s gr1,%x\n", read_register (GR1_REGNUM));
+  expect_prompt ();
+
+  for (j = 0; j < 32; j += 16)
+    {
+      fprintf (eb_stream, "s gr%d,", j + 96);
+      for (i = 0; i < 15; ++i)
+	fprintf (eb_stream, "%x,", read_register (GR96_REGNUM + j + i));
+      fprintf (eb_stream, "%x\n", read_register (GR96_REGNUM + j + 15));
+      expect_prompt ();
+    }
+
+  for (j = 0; j < 128; j += 16)
+    {
+      fprintf (eb_stream, "s lr%d,", j);
+      for (i = 0; i < 15; ++i)
+	fprintf (eb_stream, "%x,", read_register (LR0_REGNUM + j + i));
+      fprintf (eb_stream, "%x\n", read_register (LR0_REGNUM + j + 15));
+      expect_prompt ();
+    }
+
+  fprintf (eb_stream, "s sr133,%x,%x,%x\n", read_register (BP_REGNUM),
+	   read_register (FC_REGNUM), read_register (CR_REGNUM));
+  expect_prompt ();
+  fprintf (eb_stream, "s sr131,%x\n", read_register (Q_REGNUM));
+  expect_prompt ();
+  fprintf (eb_stream, "s sr0,");
+  for (i = 0; i < 11; ++i)
+    fprintf (eb_stream, "%x,", read_register (VAB_REGNUM + i));
+  fprintf (eb_stream, "%x\n", read_register (VAB_REGNUM + 11));
+  expect_prompt ();
+}
+
+/* Store register REGNO, or all if REGNO == 0.
+   Return errno value.  */
+void
+eb_store_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    eb_store_registers ();
+  else
+    {
+      char *name = get_reg_name (regno);
+      fprintf (eb_stream, "s %s,%x\n", name, read_register (regno));
+      /* Setting GR1 changes the numbers of all the locals, so
+	 invalidate the register cache.  Do this *after* calling
+	 read_register, because we want read_register to return the
+	 value that write_register has just stuffed into the registers
+	 array, not the value of the register fetched from the
+	 inferior.  */
+      if (regno == GR1_REGNUM)
+	registers_changed ();
+      expect_prompt ();
+    }
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+void
+eb_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+
+/* FIXME-someday!  Merge these two.  */
+int
+eb_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  if (write)
+    return eb_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return eb_read_inferior_memory (memaddr, myaddr, len);
+}
+
+void
+eb_files_info ()
+{
+  printf ("\tAttached to %s at %d baud and running program %s.\n",
+	  dev_name, baudrate, prog_name);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns length moved.  */
+int
+eb_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i;
+
+  for (i = 0; i < len; i++)
+    {
+      if ((i % 16) == 0)
+	fprintf (eb_stream, "sb %x,", memaddr + i);
+      if ((i % 16) == 15 || i == len - 1)
+	{
+	  fprintf (eb_stream, "%x\n", ((unsigned char *)myaddr)[i]);
+	  expect_prompt ();
+	}
+      else
+	fprintf (eb_stream, "%x,", ((unsigned char *)myaddr)[i]);
+    }
+  return len;
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns length moved.  */
+int
+eb_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i;
+
+  /* Number of bytes read so far.  */
+  int count;
+
+  /* Starting address of this pass.  */
+  unsigned long startaddr;
+
+  /* Number of bytes to read in this pass.  */
+  int len_this_pass;
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     eb_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len to memaddr and gets 0.  */
+  /* However, something like
+     eb_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+  if (((memaddr - 1) + len) < memaddr) {
+    errno = EIO;
+    return 0;
+  }
+  
+  startaddr = memaddr;
+  count = 0;
+  while (count < len)
+    {
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	len_this_pass -= startaddr % 16;
+      if (len_this_pass > (len - count))
+	len_this_pass = (len - count);
+
+      fprintf (eb_stream, "db %x,%x\n", startaddr,
+	       (startaddr - 1) + len_this_pass);
+      expect ("\n");
+
+      /* Look for 8 hex digits.  */
+      i = 0;
+      while (1)
+	{
+	  if (isxdigit (readchar ()))
+	    ++i;
+	  else
+	    {
+	      expect_prompt ();
+	      error ("Hex digit expected from remote system.");
+	    }
+	  if (i >= 8)
+	    break;
+	}
+
+      expect ("  ");
+
+      for (i = 0; i < len_this_pass; i++)
+	get_hex_byte (&myaddr[count++]);
+
+      expect_prompt ();
+
+      startaddr += len_this_pass;
+    }
+  return len;
+}
+
+static void
+eb_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* Ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+void
+eb_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&eb_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+/* Define the target subroutine names */
+
+struct target_ops eb_ops ;
+
+static void 
+init_eb_ops(void)
+{
+  eb_ops.to_shortname = 	"amd-eb";
+  eb_ops.to_longname = 	"Remote serial AMD EBMON target";
+  eb_ops.to_doc = 	"Use a remote computer running EBMON connected by a serial line.\n\
+Arguments are the name of the device for the serial line,\n\
+the speed to connect at in bits per second, and the filename of the\n\
+executable as it exists on the remote computer.  For example,\n\
+target amd-eb /dev/ttya 9600 demo",
+    eb_ops.to_open = 	eb_open;
+  eb_ops.to_close = 	eb_close;
+  eb_ops.to_attach = 	0;
+  eb_ops.to_post_attach = NULL;
+  eb_ops.to_require_attach = NULL;
+  eb_ops.to_detach = 	eb_detach;
+  eb_ops.to_require_detach = NULL;
+  eb_ops.to_resume = 	eb_resume;
+  eb_ops.to_wait  = 	eb_wait;
+  eb_ops.to_post_wait = NULL;
+  eb_ops.to_fetch_registers  = 	eb_fetch_register;
+  eb_ops.to_store_registers  = 	eb_store_register;
+  eb_ops.to_prepare_to_store = 	eb_prepare_to_store;
+  eb_ops.to_xfer_memory  = 	eb_xfer_inferior_memory;
+  eb_ops.to_files_info  = 	eb_files_info;
+  eb_ops.to_insert_breakpoint = 	0;
+  eb_ops.to_remove_breakpoint = 	0;	/* Breakpoints */
+  eb_ops.to_terminal_init  = 	0;
+  eb_ops.to_terminal_inferior = 	0;
+  eb_ops.to_terminal_ours_for_output = 	0;
+  eb_ops.to_terminal_ours  = 	0;
+  eb_ops.to_terminal_info  = 	0;	/* Terminal handling */
+  eb_ops.to_kill  = 	eb_kill;
+  eb_ops.to_load  = 	generic_load;	/* load */
+  eb_ops.to_lookup_symbol = 	0; /* lookup_symbol */
+  eb_ops.to_create_inferior = 	eb_create_inferior;
+  eb_ops.to_post_startup_inferior = NULL;
+  eb_ops.to_acknowledge_created_inferior = NULL;
+  eb_ops.to_clone_and_follow_inferior = NULL;      
+  eb_ops.to_post_follow_inferior_by_clone = NULL;
+  eb_ops.to_insert_fork_catchpoint = NULL;
+  eb_ops.to_remove_fork_catchpoint = NULL;
+  eb_ops.to_insert_vfork_catchpoint = NULL;
+  eb_ops.to_remove_vfork_catchpoint = NULL;                  
+  eb_ops.to_has_forked = NULL;
+  eb_ops.to_has_vforked = NULL;            
+  eb_ops.to_can_follow_vfork_prior_to_exec = NULL;        
+  eb_ops.to_post_follow_vfork = NULL;
+  eb_ops.to_insert_exec_catchpoint = NULL;
+  eb_ops.to_remove_exec_catchpoint = NULL;
+  eb_ops.to_has_execd = NULL;
+  eb_ops.to_reported_exec_events_per_exec_call = NULL;
+  eb_ops.to_has_exited = NULL;
+  eb_ops.to_mourn_inferior = 	eb_mourn_inferior;
+  eb_ops.to_can_run  =   	0;	/* can_run */
+  eb_ops.to_notice_signals =   	0; /* notice_signals */
+  eb_ops.to_thread_alive  = 	0; /* thread-alive */
+  eb_ops.to_stop  = 	0;			/* to_stop */
+  eb_ops.to_pid_to_exec_file = NULL;
+  eb_ops.to_core_file_to_sym_file = NULL;
+  eb_ops.to_stratum = 	process_stratum;
+  eb_ops.DONT_USE = 	0; /* next */
+  eb_ops.to_has_all_memory = 	1;
+  eb_ops.to_has_memory = 	1;
+  eb_ops.to_has_stack = 	1;
+  eb_ops.to_has_registers = 	1;
+  eb_ops.to_has_execution = 	1;	/* all mem, mem, stack, regs, exec */
+  eb_ops.to_sections = 	0; /* sections */
+  eb_ops.to_sections_end = 	0; /* sections end */
+  eb_ops.to_magic = 	OPS_MAGIC;		/* Always the last thing */
+};
+
+void
+_initialize_remote_eb ()
+{
+  init_eb_ops() ;
+  add_target (&eb_ops);
+}
diff --git a/gdb/remote-es.c b/gdb/remote-es.c
new file mode 100644
index 0000000..d26e85b
--- /dev/null
+++ b/gdb/remote-es.c
@@ -0,0 +1,2202 @@
+/* Memory-access and commands for remote es1800 processes, for GDB.
+   Copyright (C) 1988, 1992 Free Software Foundation, Inc.
+
+   This file is added to GDB to make it possible to do debugging via an
+   ES-1800 emulator. The code was originally written by Johan Holmberg
+   TT/SJ Ericsson Telecom AB and later modified by Johan Henriksson
+   TT/SJ. It was modified for gdb 4.0 by TX/DK Jan Nordenand by TX/DKG
+   Harald Johansen.
+
+This file is part of GDB.
+
+GDB is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/* Emulator communication protocol.
+   All values are encoded in ascii hex digits.
+
+        Request
+Command
+Reply
+	read registers:
+DR<cr>
+     - 0 -    - 1 -    - 2 -    - 3 -      - 4 -    - 5 -    -- 6 -   - 7 - 
+D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX   XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX   XXXXXXXX XXXXXXXX XXXXXXXX 
+    PC = XXXXXX       SSP = XXXXXX    USP = XXXXXX     SR = XXXXXXXX
+ >
+Each byte of register data is described by two hex digits.
+
+	write regs
+D0=XXXXXXXX<cr>
+ >D1=XXXXXXXX<cr>
+ >D2=XXXXXXXX<cr>
+ >D3=XXXXXXXX<cr>
+ >D4=XXXXXXXX<cr>
+ >D5=XXXXXXXX<cr>
+ >D6=XXXXXXXX<cr>
+ >D7=XXXXXXXX<cr>
+ >A0=XXXXXXXX<cr>
+ >A1=XXXXXXXX<cr>
+ >A2=XXXXXXXX<cr>
+ >A3=XXXXXXXX<cr>
+ >A4=XXXXXXXX<cr>
+ >A5=XXXXXXXX<cr>
+ >A6=XXXXXXXX<cr>
+ >A7=XXXXXXXX<cr>
+ >SR=XXXXXXXX<cr>
+ >PC=XXXXXX<cr>
+ >
+Each byte of register data is described by two hex digits.
+
+	read mem
+@.BAA..AA
+$FFFFFFXX
+ >
+AA..AA is address, XXXXXXX is the contents
+
+	write mem
+	@.BAA..AA=$XXXXXXXX
+ >
+AA..AA is address, XXXXXXXX is data
+
+	cont
+PC=$AA..AA
+ >RBK
+R>
+AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+	step
+PC=$AA..AA
+ >STP
+R>
+AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+	kill req
+STP
+ >
+*/
+
+
+#include <stdio.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/file.h>
+#include <errno.h>
+#include <ctype.h>
+#include <setjmp.h>
+#include <fcntl.h>
+#include "defs.h"
+#include "gdb_string.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "command.h"
+#include "remote-utils.h"
+#include "gdbcore.h"
+#include "serial.h"
+
+/* Prototypes for local functions */
+
+static void
+es1800_child_detach PARAMS ((char *, int));
+
+static void
+es1800_child_open PARAMS ((char *, int));
+
+static void 
+es1800_transparent PARAMS ((char *, int));
+
+static void
+es1800_create_inferior PARAMS ((char *, char *, char **));
+
+static void
+es1800_load PARAMS ((char *, int));
+
+static void
+es1800_kill PARAMS ((void));
+
+static int
+verify_break PARAMS ((int));
+
+static int
+es1800_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int
+es1800_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static void
+es1800_files_info PARAMS ((struct target_ops *));
+
+static int
+es1800_xfer_inferior_memory PARAMS ((CORE_ADDR, char *, int, int,
+				     struct target_ops *));
+
+static void 
+es1800_prepare_to_store PARAMS ((void));
+
+static int es1800_wait PARAMS ((int, struct target_waitstatus *));
+
+static void es1800_resume PARAMS ((int, int, enum target_signal));
+
+static void
+es1800_detach PARAMS ((char *, int));
+
+static void
+es1800_attach PARAMS ((char *, int));
+
+static int
+damn_b PARAMS ((char *));
+
+static void
+es1800_open PARAMS ((char *, int));
+
+static void
+es1800_timer PARAMS ((void));
+
+static void
+es1800_reset PARAMS ((char *));
+
+static void
+es1800_request_quit PARAMS ((void));
+
+static int
+readchar PARAMS ((void));
+
+static void
+expect PARAMS ((char *, int));
+
+static void
+expect_prompt PARAMS ((void));
+
+static void
+download PARAMS ((FILE *, int, int));
+
+#if 0
+static void
+bfd_copy PARAMS ((bfd *, bfd *));
+#endif
+
+static void
+get_break_addr PARAMS ((int, CORE_ADDR *));
+
+static int
+fromhex PARAMS ((int));
+
+static int
+tohex PARAMS ((int));
+
+static void
+es1800_close PARAMS ((int));
+
+static void
+es1800_fetch_registers PARAMS ((void));
+
+static void
+es1800_fetch_register PARAMS ((int));
+
+static void
+es1800_store_register PARAMS ((int));
+
+static void
+es1800_read_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static void
+es1800_write_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static void
+send_with_reply PARAMS ((char *, char *, int));
+
+static void
+send_command PARAMS ((char *));
+
+static void
+send PARAMS ((char *));
+
+static void
+getmessage PARAMS ((char *, int));
+
+static void
+es1800_mourn_inferior PARAMS ((void));
+
+static void
+es1800_create_break_insn PARAMS ((char *, int));
+
+static void
+es1800_init_break PARAMS ((char *, int));
+
+/* Local variables */
+
+/* FIXME: Convert this to use "set remotedebug" instead.  */
+#define LOG_FILE "es1800.log"
+#if defined (LOG_FILE)
+static FILE *log_file;
+#endif
+
+extern struct target_ops es1800_ops;		/* Forward decl */
+extern struct target_ops es1800_child_ops;	/* Forward decl */
+
+static int kiodebug;
+static int timeout = 100; 
+static char *savename;				/* Name of i/o device used */
+static serial_ttystate es1800_saved_ttystate;
+static int es1800_fc_save;			/* Save fcntl state */
+
+/* indicates that the emulator uses 32-bit data-adress (68020-mode) 
+   instead of 24-bit (68000 -mode) */
+
+static int m68020;
+
+#define MODE (m68020 ? "M68020" : "M68000" )
+#define ES1800_BREAK_VEC (0xf)
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so that
+   es1800_open knows that we don't have a file open when the program
+   starts.  */
+
+static serial_t es1800_desc = NULL;
+
+#define	PBUFSIZ	1000
+#define HDRLEN sizeof("@.BAAAAAAAA=$VV\r")
+
+/* Maximum number of bytes to read/write at once.  The value here
+   is chosen to fill up a packet.  */
+
+#define MAXBUFBYTES ((PBUFSIZ-150)*16/75 )
+
+static int es1800_break_vec = 0;
+static char es1800_break_insn[2];
+static long es1800_break_address;
+static void (*old_sigint)();		/* Old signal-handler for sigint */
+static jmp_buf interrupt;
+
+/* Local signalhandler to allow breaking tranfers or program run.
+   Rely on global variables: old_sigint(), interrupt */
+
+static void
+es1800_request_quit ()
+{
+  /* restore original signalhandler */
+  signal (SIGINT, old_sigint);
+  longjmp (interrupt, 1);
+}
+
+
+/* Reset emulator.
+   Sending reset character(octal 32) to emulator.
+   quit - return to '(esgdb)' prompt or continue	*/
+
+static void
+es1800_reset (quit)
+     char *quit;
+{
+  char buf[80];
+
+  if (quit)
+    {
+      printf ("\nResetting emulator...  ");
+    }
+  strcpy (buf, "\032");
+  send (buf);
+  expect_prompt ();
+  if (quit)
+    {
+      error ("done\n");
+    }
+}
+
+
+/* Open a connection to a remote debugger and push the new target
+   onto the stack. Check if the emulator is responding and find out
+   what kind of processor the emulator is connected to.
+   Initiate the breakpoint handling in the emulator.
+
+   name     - the filename used for communication (ex. '/dev/tta')
+   from_tty - says whether to be verbose or not */
+
+static void
+es1800_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  char buf[PBUFSIZ];
+  char *p;
+  int i, fcflag;
+
+  m68020 = 0;
+
+  if (!name)           /* no device name given in target command */
+    {
+      error_no_arg ("serial port device name");
+    }
+
+  target_preopen (from_tty);
+  es1800_close (0);
+
+  /* open the device and configure it for communication */
+
+#ifndef DEBUG_STDIN
+
+  es1800_desc = SERIAL_OPEN (name);
+  if (es1800_desc == NULL)
+    {
+      perror_with_name (name);
+    }
+  savename = savestring (name, strlen (name));
+
+  es1800_saved_ttystate = SERIAL_GET_TTY_STATE (es1800_desc);
+
+  if ((fcflag = fcntl (es1800_desc->fd, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+  es1800_fc_save = fcflag;
+
+  fcflag = (fcflag & (FREAD | FWRITE)); /* mask out any funny stuff */
+  if (fcntl (es1800_desc->fd, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (es1800_desc, baud_rate))
+	{
+	  SERIAL_CLOSE (es1800_desc);
+	  perror_with_name (name);
+	}
+    }
+
+  SERIAL_RAW (es1800_desc);
+
+  /* If there is something sitting in the buffer we might take it as a
+     response to a command, which would be bad.  */
+  SERIAL_FLUSH_INPUT (es1800_desc);
+
+#endif	/* DEBUG_STDIN */
+
+  push_target (&es1800_ops);	/* Switch to using remote target now */
+  if (from_tty)
+    {
+      printf ("Remote ES1800 debugging using %s\n", name);
+    }
+
+#if defined (LOG_FILE)
+
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    {
+      perror_with_name (LOG_FILE);
+    }
+
+#endif	/* LOG_FILE */
+
+  /* Hello?  Are you there?, also check mode  */
+
+  /*  send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */
+  /*  for (p = buf, i = 0; *p++ =='0';)  */   /* count the number of zeros */
+  /*      i++; */
+
+  send ("\032");
+  getmessage (buf, sizeof (buf));  /* send reset character */
+
+  if (from_tty)
+    {
+      printf ("Checking mode.... ");
+    }
+  /*  m68020 = (i==8); */   /* if eight zeros then we are in m68020 mode */
+
+  /* What kind of processor am i talking to ?*/
+  p = buf;
+  while (*p++ != '\n') {;}
+  while (*p++ != '\n') {;}
+  while (*p++ != '\n') {;}
+  for (i = 0; i < 20; i++, p++) {;}
+  m68020 = !strncmp (p, "68020", 5);
+  if (from_tty)
+    {
+      printf ("You are in %s(%c%c%c%c%c)-mode\n", MODE, p[0], p[1], p[2],
+	      p[3], p[4]);
+    }
+
+  /* if no init_break statement is present in .gdb file we have to check 
+     whether to download a breakpoint routine or not */
+
+#if 0
+  if ((es1800_break_vec == 0) || (verify_break (es1800_break_vec) != 0)
+      && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? "))
+    {
+      CORE_ADDR memaddress;
+      printf ("Give the start address of the breakpoint routine: ");
+      scanf ("%li", &memaddress);
+      es1800_init_break ((es1800_break_vec ? es1800_break_vec :
+			  ES1800_BREAK_VEC), memaddress);
+    }
+#endif
+
+}
+
+/*  Close out all files and local state before this target loses control.
+    quitting - are we quitting gdb now? */
+
+static void
+es1800_close (quitting)
+     int quitting;
+{
+  if (es1800_desc != NULL)
+    {
+      printf ("\nClosing connection to emulator...\n");
+      if (SERIAL_SET_TTY_STATE (es1800_desc, es1800_saved_ttystate) < 0)
+	print_sys_errmsg ("warning: unable to restore tty state", errno);
+      fcntl (es1800_desc->fd, F_SETFL, es1800_fc_save);
+      SERIAL_CLOSE (es1800_desc);
+      es1800_desc = NULL;
+    }
+  if (savename != NULL)
+    {
+      free (savename);
+    }
+  savename = NULL;
+
+#if defined (LOG_FILE)
+
+  if (log_file != NULL)
+    {
+      if (ferror (log_file))
+	{
+	  printf ("Error writing log file.\n");
+	}
+      if (fclose (log_file) != 0)
+	{
+	  printf ("Error closing log file.\n");
+	}
+      log_file = NULL;
+    }
+
+#endif	/* LOG_FILE */
+
+}
+
+/*  Attaches to a process on the target side
+    proc_id  - the id of the process to be attached.
+    from_tty - says whether to be verbose or not */
+
+static void
+es1800_attach (args, from_tty)
+    char *args;
+    int from_tty;
+{
+  error ("Cannot attach to pid %s, this feature is not implemented yet.",
+	 args);
+}
+
+
+/* Takes a program previously attached to and detaches it.
+   We better not have left any breakpoints
+   in the program or it'll die when it hits one.
+   Close the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.
+ 
+   args     - arguments given to the 'detach' command
+   from_tty - says whether to be verbose or not */
+
+static void
+es1800_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    {
+      error ("Argument given to \"detach\" when remotely debugging.");
+    }
+  pop_target ();
+  if (from_tty)
+    {
+      printf ("Ending es1800 remote debugging.\n");
+    }
+}
+
+
+/* Tell the remote machine to resume.
+   step    - single-step or run free
+   siggnal - the signal value to be given to the target (0 = no signal) */
+
+static void
+es1800_resume (pid, step, siggnal)
+     int pid;
+     int step;
+     enum target_signal siggnal;
+{
+  char buf[PBUFSIZ];
+
+  if (siggnal)
+    {
+      error ("Can't send signals to a remote system.");
+    }
+  if (step)
+    {
+      strcpy (buf,"STP\r");
+      send (buf);
+    }
+  else
+    {
+      send_command ("RBK");
+    }
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.
+   status -  */
+ 
+static int
+es1800_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  unsigned char buf[PBUFSIZ];
+  int old_timeout = timeout;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+  if (!setjmp (interrupt))
+    {
+      old_sigint = signal (SIGINT, es1800_request_quit);
+      while (1)
+        {
+	  getmessage (buf, sizeof(buf));
+	  if (strncmp ( buf, "\r\n* BREAK *", 11) == 0) 
+	    {
+	      status->kind = TARGET_WAITKIND_STOPPED;
+	      status->value.sig = TARGET_SIGNAL_TRAP;
+	      send_command ("STP");	/* Restore stack and PC and such */
+	      if (m68020)
+		{
+		  send_command ("STP");
+		}
+	      break;
+	    }
+	  if (strncmp (buf, "STP\r\n ", 6) == 0)
+	    {
+	      status->kind = TARGET_WAITKIND_STOPPED;
+	      status->value.sig = TARGET_SIGNAL_TRAP;
+	      break;
+	    }
+	  if (buf[strlen (buf) - 2] == 'R')
+	    {
+	      printf ("Unexpected emulator reply: \n%s\n", buf);
+	    }
+	  else
+	    {
+	      printf ("Unexpected stop: \n%s\n", buf);
+	      status->kind = TARGET_WAITKIND_STOPPED;
+	      status->value.sig = TARGET_SIGNAL_QUIT;
+	      break;
+	    }
+        }
+    }
+  else
+    {
+      fflush (stdin);
+      printf ("\nStopping emulator...");
+      if (!setjmp (interrupt))
+	{
+	  old_sigint = signal (SIGINT, es1800_request_quit);
+	  send_command ("STP");
+	  printf (" emulator stopped\n");
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_INT;
+        }
+      else
+	{
+	  fflush (stdin);
+	  es1800_reset ((char*) 1);
+	}
+    }
+  signal (SIGINT, old_sigint);
+  timeout = old_timeout;
+  return (0);
+}
+
+
+/* Fetch register values from remote machine.
+   regno - the register to be fetched (fetch all registers if -1) */
+
+static void
+es1800_fetch_register (regno)
+     int regno;
+{
+  char buf[PBUFSIZ];
+  int k;
+  int r;
+  char *p;
+  static char regtab[18][4] = 
+    {
+      "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+      "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+      "SR ", "PC "
+    };
+
+  if ((regno < 15) || (regno == 16) || (regno == 17))
+    {
+      r = regno * 4;
+      send_with_reply (regtab[regno], buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+    }
+  else
+    {
+      es1800_fetch_registers ();
+    }
+}
+
+/* Read the remote registers into REGISTERS.
+   Always fetches all registers. */
+
+static void
+es1800_fetch_registers ()
+{
+  char buf[PBUFSIZ];
+  char SR_buf[PBUFSIZ];
+  int i;
+  int k;
+  int r;
+  char *p;
+
+  send_with_reply ("DR", buf, sizeof (buf));
+
+  /* Reply is edited to a string that describes registers byte by byte,
+     each byte encoded as two hex characters.  */
+
+  p = buf;
+  r = 0;
+
+  /*  parsing row one - D0-D7-registers  */
+
+  while (*p++ != '\n') {;}
+  for (i = 4; i < 70; i += (i == 39 ? 3 : 1))
+    {
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[i+0] == 0 || p[i+1] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[i+0]) * 16) + fromhex (p[i+1]);
+	  i += 2;
+	}
+    }
+  p += i;
+
+  /*  parsing row two - A0-A6-registers  */
+
+  while (*p++ != '\n') {;}
+  for (i = 4; i < 61; i += (i == 39 ? 3 : 1))
+    {
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[i+0] == 0 || p[i+1] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[i+0])) * 16 + fromhex (p[i+1]);
+	  i += 2;
+	}
+    }
+  p += i;
+
+  while (*p++ != '\n') {;}
+
+  /* fetch SSP-, SR- and PC-registers  */
+
+  /* first - check STATUS-word and decide which stackpointer to use */
+
+  send_with_reply ("SR", SR_buf, sizeof (SR_buf));
+  p = SR_buf;
+  p += 5;
+
+  if (m68020)
+    {
+      if (*p == '3')		 /* use masterstackpointer MSP */
+	{
+	  send_with_reply ("MSP", buf, sizeof (buf));
+	}
+      else if (*p == '2')	/* use interruptstackpointer ISP  */
+	{
+	  send_with_reply ("ISP", buf, sizeof (buf));
+	}
+      else			/* use userstackpointer USP  */
+	{
+	  send_with_reply ("USP", buf, sizeof (buf)); 
+	}
+      p = buf;
+      for (k = 0; k<4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+
+      p = SR_buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] =
+	    fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]);
+	}
+      send_with_reply ("PC", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k<4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+    }
+  else    /* 68000-mode */
+    {                       
+      if (*p == '2') /* use supervisorstackpointer SSP  */
+	{
+	  send_with_reply ("SSP", buf, sizeof (buf)); 
+	}
+      else  /* use userstackpointer USP  */
+	{
+	  send_with_reply ("USP", buf, sizeof (buf)); 
+	}
+
+      /* fetch STACKPOINTER */
+
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2 + 1] == 0 || p[k*2 + 2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+
+      /* fetch STATUS */
+
+      p = SR_buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] =
+	    fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]);
+	}
+
+      /* fetch PC */
+
+      send_with_reply ("PC", buf, sizeof (buf)); 
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}    
+    }
+}
+
+/* Store register value, located in REGISTER, on the target processor.
+   regno - the register-number of the register to store
+           (-1 means store them all)
+   FIXME: Return errno value.  */
+
+static void
+es1800_store_register(regno)
+     int regno;
+{
+
+  static char regtab[18][4] =
+    {
+      "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+      "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+      "SR ", "PC "
+    };
+
+  char buf[PBUFSIZ];
+  char SR_buf[PBUFSIZ];
+  char stack_pointer[4];
+  char *p;
+  int i;
+  int j;
+  int k;
+  unsigned char *r;
+
+  r = (unsigned char *) registers;
+
+  if (regno == -1)  /* write all registers */
+    {
+      j = 0;
+      k = 18;
+    }
+  else              /* write one register */
+    {
+      j = regno;
+      k = regno+1;
+      r += regno * 4; 
+    }    
+
+  if ((regno == -1) || (regno == 15))
+    {
+      /* fetch current status */
+      send_with_reply ("SR", SR_buf, sizeof (SR_buf));
+      p = SR_buf;
+      p += 5;
+      if (m68020)
+	{
+	  if (*p == '3') /* use masterstackpointer MSP */
+	    {
+	      strcpy (stack_pointer,"MSP");  
+	    }
+	  else
+	    {
+	      if (*p == '2') /* use interruptstackpointer ISP  */
+		{
+		  strcpy (stack_pointer,"ISP");  
+		}
+	      else
+		{
+		  strcpy (stack_pointer,"USP");  /* use userstackpointer USP  */
+		}
+	    }
+	}
+      else  /* 68000-mode */
+	{
+	  if (*p == '2') /* use supervisorstackpointer SSP  */
+	    {
+	      strcpy (stack_pointer,"SSP");  
+	    }
+	  else
+	    {
+	      strcpy (stack_pointer,"USP");/* use userstackpointer USP  */  
+	    }
+	}
+      strcpy (regtab[15],stack_pointer);
+    }
+
+  for (i = j; i<k; i++)
+    {
+      buf[0] = regtab[i][0];
+      buf[1] = regtab[i][1];
+      buf[2] = regtab[i][2];
+      buf[3] = '=';
+      buf[4] = '$';
+      buf[5] = tohex ((*r >> 4) & 0x0f);
+      buf[6] = tohex (*r++ & 0x0f);
+      buf[7] = tohex ((*r >> 4) & 0x0f);
+      buf[8] = tohex (*r++ & 0x0f);
+      buf[9] = tohex ((*r >> 4) & 0x0f);
+      buf[10] = tohex (*r++ & 0x0f);
+      buf[11] = tohex ((*r >> 4) & 0x0f);
+      buf[12] = tohex (*r++ & 0x0f);
+      buf[13] = 0;
+
+      send_with_reply (buf, buf, sizeof (buf)); /* FIXME, reply not used? */
+    }
+}
+
+
+/* Prepare to store registers.  */
+
+static void 
+es1800_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+/* Convert hex digit A to a number.  */
+
+static int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    {
+      return a - '0';
+    }
+  else if (a >= 'a' && a <= 'f')
+    {
+      return a - 'a' + 10;
+    }
+  else if (a >= 'A' && a <= 'F')
+    {
+      return a - 'A' + 10;
+    }
+  else
+    {
+      error ("Reply contains invalid hex digit");
+    }
+  return (-1);
+}
+
+
+/* Convert number NIB to a hex digit.  */
+
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    {
+      return ('0' + nib);
+    }
+  else
+    {
+      return ('A' + nib - 10);
+    }
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
+   to or from debugger address MYADDR.  Write to inferior if WRITE is
+   nonzero.  Returns length of data written or read; 0 for error. 
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes 
+   write   - write if != 0 otherwise read	*/
+
+static int
+es1800_xfer_inferior_memory (memaddr, myaddr, len, write, tops)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *tops;	/* Unused */
+{
+  int origlen = len;
+  int xfersize;
+
+  while (len > 0)
+    {
+      xfersize = len > MAXBUFBYTES ? MAXBUFBYTES : len;
+      if (write)
+	{
+	  es1800_write_bytes (memaddr, myaddr, xfersize);
+	}
+      else
+	{
+	  es1800_read_bytes (memaddr, myaddr, xfersize);
+	}
+      memaddr += xfersize;
+      myaddr += xfersize;
+      len -= xfersize;
+    }
+  return (origlen); /* no error possible */
+}
+
+
+/* Write memory data directly to the emulator.
+   This does not inform the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes   */
+
+static void
+es1800_write_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  char buf[PBUFSIZ];
+  int i;
+  char *p;
+
+  p = myaddr;
+  for (i = 0; i < len; i++)
+    {
+      sprintf (buf, "@.B$%x=$%x", memaddr+i, (*p++) & 0xff);
+      send_with_reply (buf, buf, sizeof (buf));      /* FIXME send_command? */
+    }
+}
+
+
+/* Read memory data directly from the emulator.
+   This does not use the data cache; the data cache uses this.
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes   */
+
+static void
+es1800_read_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  static int DB_tab[16] = {8,11,14,17,20,23,26,29,34,37,40,43,46,49,52,55};
+  char buf[PBUFSIZ];
+  int i;
+  int low_addr;
+  char *p;
+  char *b;
+
+  if (len > PBUFSIZ / 2 - 1)
+    {
+      abort ();
+    }
+
+  if (len == 1)	/* The emulator does not like expressions like:  */
+    {
+      len = 2;	/* DB.B $20018 TO $20018                       */
+    }
+
+  /* Reply describes registers byte by byte, each byte encoded as two hex
+     characters.  */
+
+  sprintf (buf, "DB.B $%x TO $%x", memaddr, memaddr+len-1);
+  send_with_reply (buf, buf, sizeof (buf));
+  b = buf;
+  low_addr = memaddr&0x0f;
+  for (i = low_addr; i < low_addr + len; i++)
+    {
+      if ((!(i % 16)) && i)
+	{   /* if (i = 16,32,48)  */
+	  while (*p++!='\n') {;}
+	  b = p;
+	}
+      p = b + DB_tab[i%16] + (m68020 ? 2 : 0);
+      if (p[0] == 32 || p[1] == 32)
+	{
+	  error ("Emulator reply is too short: %s", buf);
+	}
+      myaddr[i-low_addr] = fromhex (p[0]) * 16 + fromhex (p[1]);
+    }
+}
+
+/* Information about the current target  */
+
+static void
+es1800_files_info (tops)
+     struct target_ops *tops;	/* Unused */
+{
+  printf ("ES1800 Attached to %s at %d baud in %s mode\n", savename, 19200,
+	  MODE);
+}
+
+
+/* We read the contents of the target location and stash it,
+   then overwrite it with a breakpoint instruction.
+ 
+   addr           - is the target location in the target machine.
+   contents_cache - is a pointer to memory allocated for saving the target contents.
+                    It is guaranteed by the caller to be long enough to save sizeof 
+                    BREAKPOINT bytes.
+ 
+   FIXME: This size is target_arch dependent and should be available in
+   the target_arch transfer vector, if we ever have one...  */
+
+static int
+es1800_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int val; 
+
+  val = target_read_memory (addr, contents_cache, sizeof (es1800_break_insn));
+
+  if (val == 0)
+    {
+      val = target_write_memory (addr, es1800_break_insn,
+				 sizeof (es1800_break_insn));
+    }
+
+  return (val);
+}
+
+
+/* Write back the stashed instruction
+ 
+   addr           - is the target location in the target machine.
+   contents_cache - is a pointer to memory allocated for saving the target contents.
+                    It is guaranteed by the caller to be long enough to save sizeof 
+                    BREAKPOINT bytes.	*/
+ 
+static int
+es1800_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+
+  return (target_write_memory (addr, contents_cache,
+			       sizeof (es1800_break_insn)));
+}
+
+/* create_break_insn ()
+   Primitive datastructures containing the es1800 breakpoint instruction  */
+
+static void
+es1800_create_break_insn (ins, vec)
+     char *ins;
+     int vec;
+{
+  if (vec == 15)
+    {
+      ins[0] = 0x4e;
+      ins[1] = 0x4f;
+    }
+}
+
+
+/* verify_break ()
+   Seach for breakpoint routine in emulator memory.
+   returns non-zero on failure
+   vec - trap vector used for breakpoints  */
+
+static int
+verify_break (vec)
+     int vec;
+{
+  CORE_ADDR memaddress;
+  char buf[8];
+  char *instr = "NqNqNqNs";      /* breakpoint routine */
+  int status;
+
+  get_break_addr (vec, &memaddress);
+
+  if (memaddress)
+    {
+      status = target_read_memory (memaddress, buf, 8); 
+      if (status != 0)
+	{
+	  memory_error (status, memaddress);
+	}
+      return (STRCMP (instr, buf));
+    }
+    return (-1);
+}
+
+
+/* get_break_addr ()
+   find address of breakpint routine
+   vec - trap vector used for breakpoints
+   addrp - store the address here	*/
+
+static void
+get_break_addr (vec, addrp)
+     int vec;
+     CORE_ADDR *addrp;
+{
+  CORE_ADDR memaddress = 0;
+  int status;
+  int k;
+  char buf[PBUFSIZ];
+  char base_addr[4];
+  char *p;
+
+  if (m68020)
+    {
+      send_with_reply ("VBR ", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+      /* base addr of exception vector table */
+      memaddress = *((CORE_ADDR *) base_addr);
+    }
+
+    memaddress += (vec + 32) * 4;     /* address of trap vector */
+    status = target_read_memory (memaddress, (char *) addrp, 4); 
+    if (status != 0)                                                   
+      {
+	memory_error (status, memaddress);
+      }
+}
+
+
+/* Kill an inferior process */
+
+static void
+es1800_kill ()
+{
+  if (inferior_pid != 0)
+    {
+      inferior_pid = 0;
+      es1800_mourn_inferior ();
+    }
+}
+
+
+/* Load a file to the ES1800 emulator. 
+   Converts the file from a.out format into Extended Tekhex format
+   before the file is loaded.
+   Also loads the trap routine, and sets the ES1800 breakpoint on it
+   filename - the a.out to be loaded
+   from_tty - says whether to be verbose or not
+   FIXME Uses emulator overlay memory for trap routine	*/
+ 
+static void
+es1800_load (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+
+  FILE *instream;
+  char loadname[15];
+  char buf[160];
+  struct cleanup *old_chain;
+  int es1800_load_format = 5;
+
+  if (es1800_desc == NULL) 
+    {
+      printf ("No emulator attached, type emulator-command first\n");
+      return;
+    }
+
+  filename = tilde_expand (filename);
+  make_cleanup (free, filename);
+
+  switch (es1800_load_format)
+    {
+      case 2:   /* Extended Tekhex  */
+        if (from_tty)
+	  {
+	    printf ("Converting \"%s\" to Extended Tekhex Format\n", filename);
+	  }
+	sprintf (buf, "tekhex %s", filename);
+	system (buf);
+	sprintf (loadname, "out.hex");
+	break;
+
+      case 5:   /* Motorola S-rec  */
+	if (from_tty)
+	  {
+	    printf ("Converting \"%s\" to Motorola S-record format\n",
+		    filename);
+	  }
+	/* in the future the source code in copy (part of binutils-1.93) will
+	   be included in this file */
+	sprintf (buf,
+		 "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex",
+		 filename);
+	system (buf);
+	sprintf (loadname, "/tmp/out.hex");
+	break;
+
+      default:
+	error ("Downloading format not defined\n");
+    }
+ 
+  breakpoint_init_inferior ();
+  inferior_pid = 0;
+  if (from_tty)
+    {
+      printf ("Downloading \"%s\" to the ES 1800\n",filename);
+    }
+  if ((instream = fopen (loadname, "r")) == NULL)
+    {
+      perror_with_name ("fopen:");
+    }
+
+  old_chain = make_cleanup (fclose, instream);
+  immediate_quit++;
+
+  es1800_reset (0);
+
+  download (instream, from_tty, es1800_load_format);
+
+  /* if breakpoint routine is not present anymore we have to check 
+     whether to download a new breakpoint routine or not */
+
+  if ((verify_break (es1800_break_vec) != 0)
+      && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? "))
+    {
+      char buf[128];
+      printf ("Using break vector 0x%x\n", es1800_break_vec);
+      sprintf (buf, "0x%x ", es1800_break_vec);
+      printf ("Give the start address of the breakpoint routine: ");
+      fgets (buf + strlen (buf), sizeof (buf) - strlen (buf), stdin);
+      es1800_init_break (buf, 0);
+    }
+
+  do_cleanups (old_chain);
+  expect_prompt ();
+  readchar ();  /* FIXME I am getting a ^G = 7 after the prompt  */
+  printf ("\n");
+
+  if (fclose (instream) == EOF)
+    {
+      ;
+    }
+
+  if (es1800_load_format != 2)
+    {
+      sprintf (buf, "/usr/bin/rm %s", loadname);
+      system (buf);
+    }
+
+  symbol_file_command (filename, from_tty);   /* reading symbol table */
+  immediate_quit--;
+}
+
+#if 0
+
+#define NUMCPYBYTES 20
+
+static void
+bfd_copy (from_bfd, to_bfd)
+     bfd *from_bfd;
+     bfd *to_bfd;
+{
+  asection *p, *new;
+  int i;
+  char buf[NUMCPYBYTES];
+
+  for (p = from_bfd->sections; p != NULL; p = p->next)
+    {
+      printf ("  Copying section %s. Size = %x.\n", p->name, p->_cooked_size);
+      printf ("    vma = %x,  offset = %x,  output_sec = %x\n",
+	      p->vma, p->output_offset, p->output_section);
+      new = bfd_make_section (to_bfd, p->name);
+      if (p->_cooked_size &&
+	  !bfd_set_section_size (to_bfd, new, p->_cooked_size))
+	{
+	  error ("Wrong BFD size!\n");
+	}
+      if (!bfd_set_section_flags (to_bfd, new, p->flags))
+	{
+	  error ("bfd_set_section_flags");
+	}
+      new->vma = p->vma;
+      
+      for (i = 0; (i + NUMCPYBYTES) < p->_cooked_size ; i += NUMCPYBYTES)
+	{
+	  if (!bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
+					(bfd_size_type) NUMCPYBYTES))
+	    {
+	      error ("bfd_get_section_contents\n");
+	    }
+	if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i,
+				      (bfd_size_type) NUMCPYBYTES))
+	  {
+	    error ("bfd_set_section_contents\n");
+	  }
+      }
+      bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
+				(bfd_size_type) (p->_cooked_size - i));
+      bfd_set_section_contents (to_bfd, new, (PTR) buf,(file_ptr) i,
+				(bfd_size_type) (p->_cooked_size - i));
+    }
+}
+
+#endif
+
+/* Start an process on the es1800 and set inferior_pid to the new
+   process' pid.
+   execfile - the file to run
+   args     - arguments passed to the program
+   env      - the environment vector to pass	*/
+
+static void
+es1800_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+  int pid;
+#if 0
+  struct expression *expr;
+  register struct cleanup *old_chain = 0;
+  register value val;
+#endif
+
+  if (args && *args)
+    {
+      error ("Can't pass arguments to remote ES1800 process");
+    }
+
+#if 0
+  if (query ("Use 'start' as entry point? "))
+    {
+      expr = parse_c_expression ("start");
+      old_chain = make_cleanup (free_current_contents, &expr);
+      val = evaluate_expression (expr);
+      entry_pt = (val->location).address;
+    }
+  else
+    {
+      printf ("Enter the program's entry point (in hexadecimal): ");
+      scanf ("%x", &entry_pt);
+    }
+#endif
+
+  if (execfile == 0 || exec_bfd == 0)
+    {
+      error ("No executable file specified");
+    }
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  pid = 42;
+
+  /* Now that we have a child process, make it our target.  */
+
+  push_target (&es1800_child_ops);
+
+  /* The "process" (board) is already stopped awaiting our commands, and
+     the program is already downloaded.  We just set its PC and go.  */
+
+  inferior_pid = pid;		/* Needed for wait_for_inferior below */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+
+  target_terminal_inferior ();
+
+  /* remote_start (args); */
+  /* trap_expected = 0; */
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+
+  /* Let 'er rip... */
+  proceed ((CORE_ADDR) entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+
+}
+
+
+/* The process has died, clean up.  */
+
+static void
+es1800_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&es1800_child_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+/* ES1800-protocol specific routines */
+
+/* Keep discarding input from the remote system, until STRING is found. 
+   Let the user break out immediately. 
+   string - the string to expect
+   nowait - break out if string not the emulator's first respond otherwise
+            read until string is found (== 0)   */
+ 
+static void
+expect (string, nowait)
+     char *string;
+    int nowait;
+{
+  char c;
+  char *p = string;
+
+  immediate_quit++;
+  while (1)
+    {
+      c = readchar ();
+      if (isalpha (c))
+	{
+	  c = toupper (c);
+	}
+      if (c == toupper (*p))
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit--;
+	      return;
+	    }
+	}
+      else if (!nowait)
+	{
+	  p = string;
+	}
+      else
+	{
+	  printf ("\'%s\' expected\n" , string);
+	  printf ("char %d is %d", p - string, c);
+	  error ("\n" );
+	}
+    }
+}
+
+/* Keep discarding input until we see the prompt.  */
+
+static void
+expect_prompt ()
+{
+  expect (">", 0);
+}
+
+
+/* Read one character */
+
+#ifdef DEBUG_STDIN
+
+/* read from stdin */
+
+static int
+readchar ()
+{
+  char buf[1];
+
+  buf[0] = '\0';
+  printf ("readchar, give one character\n");
+  read (0, buf, 1);
+
+#if defined (LOG_FILE)
+  putc (buf[0] & 0x7f, log_file);
+#endif
+
+  return (buf[0] & 0x7f);
+}
+
+#else	/* !DEBUG_STDIN */
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+
+static int
+readchar ()
+{
+  int ch;
+
+  ch = SERIAL_READCHAR (es1800_desc, timeout);
+
+  /* FIXME: doing an error() here will probably cause trouble, at least if from
+     es1800_wait.  */
+  if (ch == SERIAL_TIMEOUT)
+    error ("Timeout reading from remote system.");
+  else if (ch == SERIAL_ERROR)
+    perror_with_name ("remote read");
+
+#if defined (LOG_FILE)
+  putc (ch & 0x7f, log_file);
+  fflush (log_file);
+#endif
+
+  return (ch);
+}
+
+#endif	/* DEBUG_STDIN */
+
+
+/* Send a command to the emulator and save the reply.
+   Report an error if we get an error reply.
+   string - the es1800 command
+   buf    - containing the emulator reply on return
+   len    - size of buf  */
+
+static void
+send_with_reply (string, buf, len)
+    char *string, *buf;
+    int len;
+{
+  send (string);
+  SERIAL_WRITE (es1800_desc, "\r", 1);
+
+#ifndef DEBUG_STDIN
+  expect (string, 1);
+  expect ("\r\n", 0);
+#endif
+
+  getmessage (buf, len);
+}
+
+
+/* Send the command in STR to the emulator adding \r. check
+   the echo for consistency. 
+   string - the es1800 command  */
+ 
+static void
+send_command (string)
+     char *string;
+{
+  send (string);
+  SERIAL_WRITE (es1800_desc, "\r", 1);
+
+#ifndef DEBUG_STDIN
+  expect (string, 0);
+  expect_prompt ();
+#endif
+
+}
+
+/* Send a string
+   string - the es1800 command  */
+
+static void
+send (string)
+     char *string;
+{
+  if (kiodebug) 
+    {
+      fprintf (stderr, "Sending: %s\n", string);
+    }
+  SERIAL_WRITE (es1800_desc, string, strlen (string));
+}
+
+
+/* Read a message from the emulator and store it in BUF. 
+   buf    - containing the emulator reply on return
+   len    - size of buf  */
+ 
+static void
+getmessage (buf, len)
+     char *buf;
+     int len;
+{
+  char *bp;
+  int c;
+  int prompt_found = 0;
+  extern kiodebug;
+
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush (log_file);
+#endif
+
+  bp = buf;
+  c = readchar ();
+  do
+    {
+      if (c) 
+	{
+	  if (len-- < 2) /* char and terminaling NULL */
+	    {
+	      error ("input buffer overrun\n");
+	    }
+	  *bp++ = c;
+	}
+      c = readchar ();
+      if ((c == '>') && (*(bp - 1) == ' '))
+	{
+	  prompt_found = 1;
+	}
+    }
+  while (!prompt_found);
+  *bp = 0;
+  
+  if (kiodebug)
+    {
+      fprintf (stderr,"message received :%s\n", buf);
+    }
+}
+
+static void
+download (instream, from_tty, format)
+FILE *instream;
+     int from_tty;
+     int format;
+{
+  char c;
+  char buf[160];
+  int i = 0;
+
+  send_command ("SET #2,$1A");                  /* reset char = ^Z */
+  send_command ("SET #3,$11,$13");              /* XON  XOFF */
+  if (format == 2)
+    {
+      send_command ("SET #26,#2");
+    }
+  else
+    {
+      send_command ("SET #26,#5");		/* Format=Extended Tekhex */
+    }
+  send_command ("DFB = $10");
+  send_command ("PUR");
+  send_command ("CES");
+  send ("DNL\r");
+  expect ("DNL", 1);
+  if (from_tty)
+    {
+      printf ("    0 records loaded...\r");
+    }
+  while (fgets (buf, 160, instream))
+      {
+	send (buf);
+	if (from_tty)
+	  {
+	    printf ("%5d\b\b\b\b\b",++i);
+	    fflush (stdout);
+	  }
+	if ((c = readchar ()) != 006) 
+	  {
+	    error ("expected ACK");
+	  }
+      }
+  if (from_tty)
+    {
+      printf ("- All");
+    }
+}
+
+/* Additional commands */
+
+#if defined (TIOCGETP) && defined (FNDELAY) && defined (EWOULDBLOCK)
+#define PROVIDE_TRANSPARENT
+#endif
+
+#ifdef PROVIDE_TRANSPARENT
+/* Talk directly to the emulator
+   FIXME, uses busy wait, and is SUNOS (or at least BSD) specific  */
+
+/*ARGSUSED*/
+static void 
+es1800_transparent (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int console;
+  struct sgttyb modebl;
+  int fcflag;
+  int cc;
+  struct sgttyb console_mode_save;
+  int console_fc_save;
+  int es1800_fc_save;
+  int inputcnt = 80;
+  char inputbuf[80];
+  int consolecnt = 0;
+  char consolebuf[80];
+  int es1800_cnt = 0;
+  char es1800_buf[80];
+  int i;
+
+  dont_repeat ();
+  if (es1800_desc == NULL) 
+    {
+      printf ("No emulator attached, type emulator-command first\n");
+      return;
+    }
+
+  printf ("\n");
+  printf ("You are now communicating directly with the ES 1800 emulator.\n");
+  printf ("To leave this mode (transparent mode), press ^E.\n");
+  printf ("\n");
+  printf (" >");
+  fflush (stdout);
+
+  if ((console = open ("/dev/tty", O_RDWR)) == -1) 
+    {
+      perror_with_name ("/dev/tty:");
+    }
+
+  if ((fcflag = fcntl (console, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl console");
+    }
+
+  console_fc_save = fcflag;
+  fcflag = fcflag | FNDELAY;
+
+  if (fcntl (console, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl console");
+    }
+
+  if (ioctl (console, TIOCGETP, &modebl))
+    {
+      perror_with_name ("ioctl console");
+    }
+
+  console_mode_save = modebl;
+  modebl.sg_flags = RAW; 
+
+  if (ioctl (console, TIOCSETP, &modebl))
+    {
+      perror_with_name ("ioctl console");
+    }
+
+  if ((fcflag = fcntl (es1800_desc->fd, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+  es1800_fc_save = fcflag;
+  fcflag = fcflag | FNDELAY;
+
+  if (fcntl (es1800_desc->fd, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+  while (1)
+    { 
+      cc = read (console, inputbuf, inputcnt);
+      if (cc != -1)
+	{
+	  if ((*inputbuf & 0x7f) == 0x05)
+	    {
+	      break;
+	    }
+	  for (i = 0; i < cc; )
+	    {
+	      es1800_buf[es1800_cnt++] = inputbuf[i++];
+	    }
+	  if ((cc = SERIAL_WRITE (es1800_desc, es1800_buf, es1800_cnt)) == -1)
+	    {
+	      perror_with_name ("FEL! write:");
+	    }
+	  es1800_cnt -= cc;
+	  if (es1800_cnt && cc) 
+	    {
+	      for (i = 0; i < es1800_cnt; i++)
+		{
+		  es1800_buf[i] = es1800_buf[cc+i];
+		}
+	    }
+	}
+      else if (errno != EWOULDBLOCK)
+	{
+	  perror_with_name ("FEL! read:");
+	}
+      
+      cc = read (es1800_desc->fd,inputbuf,inputcnt);
+      if (cc != -1)
+	{
+	  for (i = 0; i < cc; )
+	    {
+	      consolebuf[consolecnt++] = inputbuf[i++];
+	    }
+	  if ((cc = write (console,consolebuf,consolecnt)) == -1)
+	    {
+	      perror_with_name ("FEL! write:");
+	    }
+	  consolecnt -= cc;
+	  if (consolecnt && cc) 
+	    {
+	      for (i = 0; i < consolecnt; i++)
+		{
+		  consolebuf[i] = consolebuf[cc+i];
+		}
+	    }
+	}
+      else if (errno != EWOULDBLOCK)
+	{
+	  perror_with_name ("FEL! read:");
+	}
+    }
+
+  console_fc_save = console_fc_save & !FNDELAY;
+  if (fcntl (console, F_SETFL, console_fc_save) == -1)
+    {
+      perror_with_name ("FEL! fcntl");
+    }
+
+  if (ioctl (console, TIOCSETP, &console_mode_save))
+    {
+      perror_with_name ("FEL! ioctl");
+    }
+
+  close (console);
+
+  if (fcntl (es1800_desc->fd, F_SETFL, es1800_fc_save) == -1)
+    {
+      perror_with_name ("FEL! fcntl");
+    }
+
+  printf ("\n");
+
+}
+#endif /* PROVIDE_TRANSPARENT */
+
+static void
+es1800_init_break (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  CORE_ADDR memaddress = 0;
+  char buf[PBUFSIZ];
+  char base_addr[4];
+  char *space_index;
+  char *p;
+  int k;
+
+  if (args == NULL)
+    {
+      error_no_arg ("a trap vector");
+    }
+
+  if (!(space_index = strchr (args, ' ')))
+    {
+      error ("Two arguments needed (trap vector and address of break routine).\n");
+    }
+
+  *space_index = '\0';
+
+  es1800_break_vec = strtol (args, (char **) NULL, 0);
+  es1800_break_address = parse_and_eval_address (space_index + 1);
+
+  es1800_create_break_insn (es1800_break_insn, es1800_break_vec);
+
+  if (m68020)
+    {
+      send_with_reply ("VBR ", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+      /* base addr of exception vector table */
+      memaddress =  *((CORE_ADDR *) base_addr);
+    }
+
+  memaddress += (es1800_break_vec + 32) * 4;     /* address of trap vector */
+
+  sprintf (buf, "@.L%lx=$%lx", memaddress, es1800_break_address);
+  send_command (buf);   /* set the address of the break routine in the */
+  		       /* trap vector */
+  
+  sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address);      /* NOP; NOP */
+  send_command (buf);
+  sprintf (buf, "@.L%lx=$4E714E73", es1800_break_address + 4);  /* NOP; RTE */
+  send_command (buf);
+  
+  sprintf (buf, "AC2=$%lx", es1800_break_address + 4);
+  /* breakpoint at es1800-break_address */
+  send_command (buf);
+  send_command ("WHEN AC2 THEN BRK");          /* ie in exception routine */
+
+  if (from_tty)
+    {
+      printf ("Breakpoint (trap $%x) routine at address: %lx\n",
+	      es1800_break_vec, es1800_break_address);
+    }
+}	  
+
+static void
+es1800_child_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a child process.");
+}
+
+static void
+es1800_child_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    {
+      error ("Argument given to \"detach\" when remotely debugging.");
+    }
+  
+  pop_target ();
+  if (from_tty)
+    {
+      printf ("Ending debugging the process %d.\n", inferior_pid);
+    }
+}
+
+
+/* Define the target subroutine names  */
+
+struct target_ops es1800_ops ;
+
+static void 
+init_es1800_ops(void)
+{
+  es1800_ops.to_shortname =   "es1800";		
+  es1800_ops.to_longname =   "Remote serial target in ES1800-emulator protocol";
+  es1800_ops.to_doc =   "Remote debugging on the es1800 emulator via a serial line.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya)." ;
+  es1800_ops.to_open =   es1800_open;		
+  es1800_ops.to_close =   es1800_close;		
+  es1800_ops.to_attach =   es1800_attach;
+  es1800_ops.to_post_attach = NULL;	
+  es1800_ops.to_require_attach = NULL;
+  es1800_ops.to_detach =   es1800_detach;	
+  es1800_ops.to_require_detach = NULL;
+  es1800_ops.to_resume =   es1800_resume;	
+  es1800_ops.to_wait  =   NULL;
+  es1800_ops.to_post_wait = NULL;	
+  es1800_ops.to_fetch_registers  =   NULL;	
+  es1800_ops.to_store_registers  =   NULL;	
+  es1800_ops.to_prepare_to_store =   es1800_prepare_to_store;
+  es1800_ops.to_xfer_memory  =   es1800_xfer_inferior_memory;
+  es1800_ops.to_files_info  =   es1800_files_info;		
+  es1800_ops.to_insert_breakpoint =   es1800_insert_breakpoint;	
+  es1800_ops.to_remove_breakpoint =   es1800_remove_breakpoint;	
+  es1800_ops.to_terminal_init  =   NULL;			
+  es1800_ops.to_terminal_inferior =   NULL;			
+  es1800_ops.to_terminal_ours_for_output =   NULL;		
+  es1800_ops.to_terminal_ours  =   NULL;			
+  es1800_ops.to_terminal_info  =   NULL;			
+  es1800_ops.to_kill  =   NULL;			
+  es1800_ops.to_load  =   es1800_load;		
+  es1800_ops.to_lookup_symbol =   NULL;		
+  es1800_ops.to_create_inferior =   es1800_create_inferior;
+  es1800_ops.to_post_startup_inferior = NULL;
+  es1800_ops.to_acknowledge_created_inferior = NULL;
+  es1800_ops.to_clone_and_follow_inferior = NULL;  
+  es1800_ops.to_post_follow_inferior_by_clone = NULL;
+  es1800_ops.to_insert_fork_catchpoint = NULL;
+  es1800_ops.to_remove_fork_catchpoint = NULL;
+  es1800_ops.to_insert_vfork_catchpoint = NULL;
+  es1800_ops.to_remove_vfork_catchpoint = NULL;              
+  es1800_ops.to_has_forked = NULL;
+  es1800_ops.to_has_vforked = NULL;            
+  es1800_ops.to_can_follow_vfork_prior_to_exec = NULL;    
+  es1800_ops.to_post_follow_vfork = NULL;
+  es1800_ops.to_insert_exec_catchpoint = NULL;
+  es1800_ops.to_remove_exec_catchpoint = NULL;
+  es1800_ops.to_has_execd = NULL;
+  es1800_ops.to_reported_exec_events_per_exec_call = NULL;
+  es1800_ops.to_has_exited = NULL;
+  es1800_ops.to_mourn_inferior =   NULL;			
+  es1800_ops.to_can_run  =   0;			
+  es1800_ops.to_notice_signals =   0;		
+  es1800_ops.to_thread_alive  =   0;		
+  es1800_ops.to_stop  =   0;
+  es1800_ops.to_pid_to_exec_file = NULL;
+  es1800_ops.to_core_file_to_sym_file = NULL;	
+  es1800_ops.to_stratum =   core_stratum;	
+  es1800_ops.DONT_USE =   0;			
+  es1800_ops.to_has_all_memory =   0;		
+  es1800_ops.to_has_memory =   1;		
+  es1800_ops.to_has_stack =   0;		
+  es1800_ops.to_has_registers =   0;		
+  es1800_ops.to_has_execution =   0;		
+  es1800_ops.to_sections =   NULL;		
+  es1800_ops.to_sections_end =   NULL;		
+  es1800_ops.to_magic =   OPS_MAGIC ;		
+}
+
+/* Define the target subroutine names  */
+
+struct target_ops es1800_child_ops ;
+
+static void 
+init_es1800_child_ops(void)
+{
+  es1800_child_ops.to_shortname =   "es1800_process";	
+  es1800_child_ops.to_longname =   "Remote serial target in ES1800-emulator protocol";
+  es1800_child_ops.to_doc =   "Remote debugging on the es1800 emulator via a serial line.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  es1800_child_ops.to_open =   es1800_child_open;	
+  es1800_child_ops.to_close =   NULL;			
+  es1800_child_ops.to_attach =   es1800_attach;
+  es1800_child_ops.to_post_attach = NULL;
+  es1800_child_ops.to_require_attach = NULL;	
+  es1800_child_ops.to_detach =   es1800_child_detach;
+  es1800_child_ops.to_require_detach = NULL;	
+  es1800_child_ops.to_resume =   es1800_resume;	
+  es1800_child_ops.to_wait  =   es1800_wait;
+  es1800_child_ops.to_post_wait = NULL;	
+  es1800_child_ops.to_fetch_registers  =   es1800_fetch_register;
+  es1800_child_ops.to_store_registers  =   es1800_store_register;
+  es1800_child_ops.to_prepare_to_store =   es1800_prepare_to_store;
+  es1800_child_ops.to_xfer_memory  =   es1800_xfer_inferior_memory;
+  es1800_child_ops.to_files_info  =   es1800_files_info;		
+  es1800_child_ops.to_insert_breakpoint =   es1800_insert_breakpoint;	
+  es1800_child_ops.to_remove_breakpoint =   es1800_remove_breakpoint;	
+  es1800_child_ops.to_terminal_init  =   NULL;			
+  es1800_child_ops.to_terminal_inferior =   NULL;			
+  es1800_child_ops.to_terminal_ours_for_output =   NULL;		
+  es1800_child_ops.to_terminal_ours  =   NULL;			
+  es1800_child_ops.to_terminal_info  =   NULL;			
+  es1800_child_ops.to_kill  =   es1800_kill;			
+  es1800_child_ops.to_load  =   es1800_load;			
+  es1800_child_ops.to_lookup_symbol =   NULL;			
+  es1800_child_ops.to_create_inferior =   es1800_create_inferior;
+  es1800_child_ops.to_post_startup_inferior = NULL;
+  es1800_child_ops.to_acknowledge_created_inferior = NULL;
+  es1800_child_ops.to_clone_and_follow_inferior = NULL;
+  es1800_child_ops.to_post_follow_inferior_by_clone = NULL;
+  es1800_child_ops.to_insert_fork_catchpoint = NULL;
+  es1800_child_ops.to_remove_fork_catchpoint = NULL;
+  es1800_child_ops.to_insert_vfork_catchpoint = NULL;
+  es1800_child_ops.to_remove_vfork_catchpoint = NULL;        
+  es1800_child_ops.to_has_forked = NULL;
+  es1800_child_ops.to_has_vforked = NULL;          
+  es1800_child_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  es1800_child_ops.to_post_follow_vfork = NULL;
+  es1800_child_ops.to_insert_exec_catchpoint = NULL;
+  es1800_child_ops.to_remove_exec_catchpoint = NULL;
+  es1800_child_ops.to_has_execd = NULL;
+  es1800_child_ops.to_reported_exec_events_per_exec_call = NULL;
+  es1800_child_ops.to_has_exited = NULL;
+  es1800_child_ops.to_mourn_inferior =   es1800_mourn_inferior;	
+  es1800_child_ops.to_can_run  =   0;				
+  es1800_child_ops.to_notice_signals =   0;			
+  es1800_child_ops.to_thread_alive  =   0;			
+  es1800_child_ops.to_stop  =   0;
+  es1800_child_ops.to_pid_to_exec_file = NULL;
+  es1800_child_ops.to_core_file_to_sym_file = NULL;
+  es1800_child_ops.to_stratum =   process_stratum;		
+  es1800_child_ops.DONT_USE =   0;				
+  es1800_child_ops.to_has_all_memory =   1;			
+  es1800_child_ops.to_has_memory =   1;			
+  es1800_child_ops.to_has_stack =   1;			
+  es1800_child_ops.to_has_registers =   1;			
+  es1800_child_ops.to_has_execution =   1;			
+  es1800_child_ops.to_sections =   NULL;			
+  es1800_child_ops.to_sections_end =   NULL;			
+  es1800_child_ops.to_magic =   OPS_MAGIC;			
+}
+
+void
+_initialize_es1800 ()
+{
+  init_es1800_ops() ;
+  init_es1800_child_ops() ;
+  add_target (&es1800_ops);
+  add_target (&es1800_child_ops);
+#ifdef PROVIDE_TRANSPARENT
+  add_com ("transparent", class_support, es1800_transparent,
+	   "Start transparent communication with the ES 1800 emulator.");
+#endif /* PROVIDE_TRANSPARENT */
+  add_com ("init_break", class_support, es1800_init_break,
+	   "Download break routine and initialize break facility on ES 1800");
+}
diff --git a/gdb/remote-est.c b/gdb/remote-est.c
new file mode 100644
index 0000000..27fd8aa
--- /dev/null
+++ b/gdb/remote-est.c
@@ -0,0 +1,171 @@
+/* Remote debugging interface for EST-300 ICE, for GDB
+   Copyright 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+   Written by Steve Chamberlain for Cygnus Support.
+   Re-written by Stu Grossman of Cygnus Support
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void est_open PARAMS ((char *args, int from_tty));
+
+static void
+est_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+
+  switch (regname[0])
+    {
+    case 'S':
+      if (regname[1] != 'R')
+	return;
+      regno = PS_REGNUM;
+      break;
+    case 'P':
+      if (regname[1] != 'C')
+	return;
+      regno = PC_REGNUM;
+      break;
+    case 'D':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + D0_REGNUM;
+      break;
+    case 'A':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + A0_REGNUM;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/*
+ * This array of registers needs to match the indexes used by GDB. The
+ * whole reason this exists is because the various ROM monitors use
+ * different names than GDB does, and don't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+
+static char *est_regnames[NUM_REGS] =
+{
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+  "SR", "PC",
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops est_ops;
+
+static char *est_inits[] = {"he\r", /* Resets the prompt, and clears repeated cmds */
+			      NULL};
+
+static struct monitor_ops est_cmds ;
+
+static void 
+init_est_cmds(void)
+{
+  est_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_NEED_REGDUMP_AFTER_CONT |
+    MO_SREC_ACK | MO_SREC_ACK_PLUS ;
+  est_cmds.init =   est_inits;			/* Init strings */
+  est_cmds.cont =   "go\r";			/* continue command */
+  est_cmds.step =   "sidr\r";			/* single step */
+  est_cmds.stop =   "\003";			/* ^C interrupts the program */
+  est_cmds.set_break =   "sb %x\r";			/* set a breakpoint */
+  est_cmds.clr_break =   "rb %x\r";			/* clear a breakpoint */
+  est_cmds.clr_all_break =   "rb\r";			/* clear all breakpoints */
+  est_cmds.fill =   "bfb %x %x %x\r";		/* fill (start end val) */
+  est_cmds.setmem.cmdb =     "smb %x %x\r";		/* setmem.cmdb (addr, value) */
+  est_cmds.setmem.cmdw =     "smw %x %x\r";		/* setmem.cmdw (addr, value) */
+  est_cmds.setmem.cmdl =     "sml %x %x\r";		/* setmem.cmdl (addr, value) */
+  est_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  est_cmds.setmem.resp_delim =     NULL;			/* setreg.resp_delim */
+  est_cmds.setmem.term =     NULL;			/* setreg.term */
+  est_cmds.setmem.term_cmd =     NULL;			/* setreg.term_cmd */
+  est_cmds.getmem.cmdb =     "dmb %x %x\r";		/* getmem.cmdb (addr, len) */
+  est_cmds.getmem.cmdw =     "dmw %x %x\r";		/* getmem.cmdw (addr, len) */
+  est_cmds.getmem.cmdl =     "dml %x %x\r";		/* getmem.cmdl (addr, len) */
+  est_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, len) */
+  est_cmds.getmem.resp_delim =     ": ";			/* getmem.resp_delim */
+  est_cmds.getmem.term =     NULL;			/* getmem.term */
+  est_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+  est_cmds.setreg.cmd =     "sr %s %x\r";		/* setreg.cmd (name, value) */
+  est_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  est_cmds.setreg.term =     NULL;			/* setreg.term */
+  est_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  est_cmds.getreg.cmd =     "dr %s\r";			/* getreg.cmd (name) */
+  est_cmds.getreg.resp_delim =     " = ";			/* getreg.resp_delim */
+  est_cmds.getreg.term =     NULL;			/* getreg.term */
+  est_cmds.getreg.term_cmd =     NULL ;			/* getreg.term_cmd */
+  est_cmds.dump_registers =   "dr\r";			/* dump_registers */
+  est_cmds.register_pattern =   "\\(\\w+\\) = \\([0-9a-fA-F]+\\)"; /* register_pattern */
+  est_cmds.supply_register =   est_supply_register;		/* supply_register */
+  est_cmds.load_routine =   NULL;				/* load_routine (defaults to SRECs) */
+  est_cmds.load =   "dl\r";			/* download command */
+  est_cmds.loadresp =   "+";				/* load response */
+  est_cmds.prompt =   ">BKM>";			/* monitor command prompt */
+  est_cmds.line_term =   "\r";				/* end-of-line terminator */
+  est_cmds.cmd_end =   NULL;				/* optional command terminator */
+  est_cmds.target =   &est_ops;			/* target operations */
+  est_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  est_cmds.regnames =   est_regnames;			/* registers names */
+  est_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_est_cmds */
+
+static void
+est_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &est_cmds, from_tty);
+}
+
+void
+_initialize_est ()
+{
+  init_est_cmds() ;
+  init_monitor_ops (&est_ops);
+
+  est_ops.to_shortname = "est";
+  est_ops.to_longname = "EST background debug monitor";
+  est_ops.to_doc = "Debug via the EST BDM.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  est_ops.to_open = est_open;
+
+  add_target (&est_ops);
+}
diff --git a/gdb/remote-hms.c b/gdb/remote-hms.c
new file mode 100644
index 0000000..3ca8455
--- /dev/null
+++ b/gdb/remote-hms.c
@@ -0,0 +1,1500 @@
+/* Remote debugging interface for Hitachi HMS Monitor Version 1.0
+   Copyright 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Steve Chamberlain
+   (sac@cygnus.com).
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void hms_open PARAMS ((char *args, int from_tty));
+static void
+hms_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+  if (regname[0] != 'P')
+    return;
+  /* We scan off all the registers in one go */
+
+  val = monitor_supply_register (PC_REGNUM, val);
+  /* Skip the ccr string */
+  while (*val != '=' && *val)
+    val++;
+
+  val = monitor_supply_register (CCR_REGNUM, val + 1);
+
+  /* Skip up to rest of regs */
+  while (*val != '=' && *val)
+    val++;
+
+  for (regno = 0; regno < 7; regno++)
+    {
+      val = monitor_supply_register (regno, val + 1);
+    }
+}
+
+/*
+ * This array of registers needs to match the indexes used by GDB. The
+ * whole reason this exists is because the various ROM monitors use
+ * different names than GDB does, and don't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+
+static char *hms_regnames[NUM_REGS] =
+{
+  "R0", "R1", "R2", "R3", "R4", "R5", "R6", "R7", "CCR", "PC"
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops hms_ops;
+
+static char *hms_inits[] =
+{"\003",			/* Resets the prompt, and clears repeated cmds */
+ NULL};
+
+static struct monitor_ops hms_cmds ;
+
+static void 
+init_hms_cmds(void)
+{
+  hms_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_FILL_USES_ADDR | MO_GETMEM_NEEDS_RANGE;
+  hms_cmds.init =   hms_inits;		/* Init strings */
+  hms_cmds.cont =   "g\r";		/* continue command */
+  hms_cmds.step =   "s\r";		/* single step */
+  hms_cmds.stop =   "\003";		/* ^C interrupts the program */
+  hms_cmds.set_break =   "b %x\r";	/* set a breakpoint */
+  hms_cmds.clr_break =   "b - %x\r";	/* clear a breakpoint */
+  hms_cmds.clr_all_break =   "b -\r";	/* clear all breakpoints */
+  hms_cmds.fill =   "f %x %x %x\r";	/* fill (start end val) */
+  hms_cmds.setmem.cmdb =     "m.b %x=%x\r";	/* setmem.cmdb (addr, value) */
+  hms_cmds.setmem.cmdw =     "m.w %x=%x\r";	/* setmem.cmdw (addr, value) */
+  hms_cmds.setmem.cmdl =     NULL;	/* setmem.cmdl (addr, value) */
+  hms_cmds.setmem.cmdll =     NULL;	/* setmem.cmdll (addr, value) */
+  hms_cmds.setmem.resp_delim =     NULL;/* setreg.resp_delim */
+  hms_cmds.setmem.term =     NULL;	/* setreg.term */
+  hms_cmds.setmem.term_cmd =     NULL;	/* setreg.term_cmd */
+  hms_cmds.getmem.cmdb =     "m.b %x %x\r";	/* getmem.cmdb (addr, addr) */
+  hms_cmds.getmem.cmdw =     "m.w %x %x\r";	/* getmem.cmdw (addr, addr) */
+  hms_cmds.getmem.cmdl =     NULL;	/* getmem.cmdl (addr, addr) */
+  hms_cmds.getmem.cmdll =     NULL;	/* getmem.cmdll (addr, addr) */
+  hms_cmds.getmem.resp_delim =     ": ";/* getmem.resp_delim */
+  hms_cmds.getmem.term =     ">";	/* getmem.term */
+  hms_cmds.getmem.term_cmd =     "\003";/* getmem.term_cmd */
+  hms_cmds.setreg.cmd =     "r %s=%x\r";/* setreg.cmd (name, value) */
+  hms_cmds.setreg.resp_delim =     NULL;/* setreg.resp_delim */
+  hms_cmds.setreg.term =     NULL;	/* setreg.term */
+  hms_cmds.setreg.term_cmd =     NULL;	/* setreg.term_cmd */
+  hms_cmds.getreg.cmd =     "r %s\r";	/* getreg.cmd (name) */
+  hms_cmds.getreg.resp_delim =     " (";/* getreg.resp_delim */
+  hms_cmds.getreg.term =     ":";	/* getreg.term */
+  hms_cmds.getreg.term_cmd =     "\003";/* getreg.term_cmd */
+  hms_cmds.dump_registers =   "r\r";	/* dump_registers */
+  hms_cmds.register_pattern =   "\\(\\w+\\)=\\([0-9a-fA-F]+\\)";	/* register_pattern */
+  hms_cmds.supply_register =   hms_supply_register;	/* supply_register */
+  hms_cmds.load_routine =   NULL;	/* load_routine (defaults to SRECs) */
+  hms_cmds.load =   "tl\r";		/* download command */
+  hms_cmds.loadresp =   NULL;		/* load response */
+  hms_cmds.prompt =   ">";		/* monitor command prompt */
+  hms_cmds.line_term =   "\r";		/* end-of-command delimitor */
+  hms_cmds.cmd_end =   NULL;		/* optional command terminator */
+  hms_cmds.target =   &hms_ops;		/* target operations */
+  hms_cmds.stopbits =   SERIAL_1_STOPBITS;/* number of stop bits */
+  hms_cmds.regnames =   hms_regnames;	/* registers names */
+  hms_cmds.magic =   MONITOR_OPS_MAGIC;	/* magic */
+} /* init_hms-cmds */
+
+static void
+hms_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &hms_cmds, from_tty);
+}
+
+int write_dos_tick_delay;
+
+void
+_initialize_remote_hms ()
+{
+  init_hms_cmds() ;
+  init_monitor_ops (&hms_ops);
+
+  hms_ops.to_shortname = "hms";
+  hms_ops.to_longname = "Hitachi Microsystems H8/300 debug monitor";
+  hms_ops.to_doc = "Debug via the HMS monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  hms_ops.to_open = hms_open;
+  /* By trial and error I've found that this delay doesn't break things */
+  write_dos_tick_delay = 1;
+  add_target (&hms_ops);
+}
+
+#if 0
+/* This is kept here because we used to support the H8/500 in this module,
+   and I haven't done the H8/500 yet */
+#include "defs.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <errno.h>
+#include "terminal.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "serial.h"
+#include "remote-utils.h"
+/* External data declarations */
+extern int stop_soon_quietly;	/* for wait_for_inferior */
+
+/* Forward data declarations */
+extern struct target_ops hms_ops;	/* Forward declaration */
+
+/* Forward function declarations */
+static void hms_fetch_registers ();
+static int hms_store_registers ();
+static void hms_close ();
+static int hms_clear_breakpoints ();
+
+extern struct target_ops hms_ops;
+static void hms_drain ();
+static void add_commands ();
+static void remove_commands ();
+
+static int quiet = 1;		/* FIXME - can be removed after Dec '94 */
+
+
+
+/***********************************************************************
+ * I/O stuff stolen from remote-eb.c
+ ***********************************************************************/
+
+static int timeout = 2;
+
+static const char *dev_name;
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   hms_open knows that we don't have a file open when the program
+   starts.  */
+
+static int before = 0xdead;
+static int is_open = 0;
+static int after = 0xdead;
+int
+check_open ()
+{
+  if (before != 0xdead
+      || after != 0xdead)
+    printf ("OUTCH! \n");
+  if (!is_open)
+    {
+      error ("remote device not open");
+    }
+}
+
+#define ON	1
+#define OFF	0
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+static int
+readchar ()
+{
+  int buf;
+
+  buf = SERIAL_READCHAR (desc, timeout);
+
+  if (buf == SERIAL_TIMEOUT)
+    {
+      hms_write (".\r\n", 3);
+      error ("Timeout reading from remote system.");
+    }
+  if (buf == SERIAL_ERROR)
+    {
+      error ("Serial port error!");
+    }
+
+  if (!quiet || remote_debug)
+    printf_unfiltered ("%c", buf);
+
+  return buf & 0x7f;
+}
+
+static void
+flush ()
+{
+  while (1)
+    {
+      int b = SERIAL_READCHAR (desc, 0);
+      if (b == SERIAL_TIMEOUT)
+	return;
+    }
+}
+
+static int
+readchar_nofail ()
+{
+  int buf;
+
+  buf = SERIAL_READCHAR (desc, timeout);
+  if (buf == SERIAL_TIMEOUT)
+    buf = 0;
+  if (!quiet || remote_debug)
+    printf_unfiltered ("%c", buf);
+
+  return buf & 0x7f;
+
+}
+
+/* Keep discarding input from the remote system, until STRING is found.
+   Let the user break out immediately.  */
+static void
+expect (string)
+     char *string;
+{
+  char *p = string;
+  char c;
+  immediate_quit = 1;
+  while (1)
+    {
+      c = readchar ();
+      if (c == *p)
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      return;
+	    }
+	}
+      else
+	{
+	  p = string;
+	  if (c == *p)
+	    p++;
+	}
+    }
+}
+
+/* Keep discarding input until we see the hms prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  hms_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a hms_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt ()
+{
+  expect ("HMS>");
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit (ignore_space)
+     int ignore_space;
+{
+  int ch;
+
+  while (1)
+    {
+      ch = readchar ();
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt ();
+	  error ("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from hms_desc and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Read a 32-bit hex word from the hms, preceded by a space  */
+static long
+get_hex_word ()
+{
+  long val;
+  int j;
+
+  val = 0;
+  for (j = 0; j < 8; j++)
+    val = (val << 4) + get_hex_digit (j == 0);
+  return val;
+}
+
+/* Called when SIGALRM signal sent due to alarm() timeout.  */
+
+/* Number of SIGTRAPs we need to simulate.  That is, the next
+   NEED_ARTIFICIAL_TRAP calls to hms_wait should just return
+   SIGTRAP without actually waiting for anything.  */
+
+static int need_artificial_trap = 0;
+
+void
+hms_kill (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+void
+hms_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+  char buffer[100];
+
+  if (args && *args)
+    error ("Can't pass arguments to remote hms process.");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+  check_open ();
+
+  hms_kill (NULL, NULL);
+  hms_clear_breakpoints ();
+  init_wait_for_inferior ();
+  hms_write_cr ("");
+  expect_prompt ();
+
+  insert_breakpoints ();	/* Needed to get correct instruction in cache */
+  proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication, then a space,
+   then the baud rate.
+ */
+
+static char *
+find_end_of_word (s)
+     char *s;
+{
+  while (*s && !isspace (*s))
+    s++;
+  return s;
+}
+
+static char *
+get_word (p)
+     char **p;
+{
+  char *s = *p;
+  char *word;
+  char *copy;
+  size_t len;
+
+  while (isspace (*s))
+    s++;
+
+  word = s;
+
+  len = 0;
+
+  while (*s && !isspace (*s))
+    {
+      s++;
+      len++;
+
+    }
+  copy = xmalloc (len + 1);
+  memcpy (copy, word, len);
+  copy[len] = 0;
+  *p = s;
+  return copy;
+}
+
+static int baudrate = 9600;
+
+static int
+is_baudrate_right ()
+{
+  int ok;
+
+  /* Put this port into NORMAL mode, send the 'normal' character */
+
+  hms_write ("\001", 1);	/* Control A */
+  hms_write ("\r\n", 2);	/* Cr */
+
+  while (1)
+    {
+      ok = SERIAL_READCHAR (desc, timeout);
+      if (ok < 0)
+	break;
+    }
+
+  hms_write ("r", 1);
+
+  if (readchar_nofail () == 'r')
+    return 1;
+
+  /* Not the right baudrate, or the board's not on */
+  return 0;
+}
+static void
+set_rate ()
+{
+  if (!SERIAL_SETBAUDRATE (desc, baudrate))
+    error ("Can't set baudrate");
+}
+
+
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+hms_close (quitting)
+     int quitting;
+{
+  /* Clear any break points */
+  remove_commands ();
+  hms_clear_breakpoints ();
+  sleep (1);			/* Let any output make it all the way back */
+  if (is_open)
+    {
+      SERIAL_WRITE (desc, "R\r\n", 3);
+      SERIAL_CLOSE (desc);
+    }
+  is_open = 0;
+}
+
+/* Terminate the open connection to the remote debugger.  Use this
+   when you want to detach and do something else with your gdb.  */ void
+hms_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (is_open)
+    {
+      hms_clear_breakpoints ();
+    }
+
+  pop_target ();		/* calls hms_close to do the real work
+				 */
+  if (from_tty)
+    printf_filtered ("Ending remote %s debugging\n",
+		     target_shortname);
+}
+
+/* Tell the remote machine to resume.  */
+
+void
+hms_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal
+       sig;
+{
+  if (step)
+    {
+      hms_write_cr ("s");
+      expect ("Step>");
+
+      /* Force the next hms_wait to return a trap.  Not doing anything
+         about I/O from the target means that the user has to type "continue"
+         to see any.  FIXME, this should be fixed.  */
+      need_artificial_trap = 1;
+    }
+  else
+    {
+      hms_write_cr ("g");
+      expect ("g");
+    }
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+   STATUS just as `wait' would.  */
+
+int
+hms_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  /* Strings to look for.  '?' means match any single character.  Note
+     that with the algorithm we use, the initial character of the string
+     cannot recur in the string, or we will not find some cases of the
+     string in the input.  */
+
+  static char bpt[] = "At breakpoint:";
+
+  /* It would be tempting to look for "\n[__exit + 0x8]\n" but that
+     requires loading symbols with "yc i" and even if we did do that we
+     don't know that the file has symbols.  */
+  static char exitmsg[] = "HMS>";
+  char *bp = bpt;
+  char *ep = exitmsg;
+
+  /* Large enough for either sizeof (bpt) or sizeof (exitmsg) chars.
+   */
+  char swallowed[50];
+
+  /* Current position in swallowed.  */
+  char *swallowed_p = swallowed;
+
+  int ch;
+  int ch_handled;
+  int old_timeout = timeout;
+  int
+    old_immediate_quit = immediate_quit;
+  int swallowed_cr = 0;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  if (need_artificial_trap != 0)
+    {
+      status->kind =
+	TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      need_artificial_trap--;
+      return 0;
+    }
+
+  timeout = 5;			/* Don't time out for a while - user program is running.
+				 */
+  immediate_quit = 1;		/* Helps ability to QUIT */
+  while (1)
+    {
+      QUIT;			/* Let user quit and leave process running */
+      ch_handled = 0;
+      ch = readchar ();
+      if (ch == *bp)
+	{
+	  bp++;
+	  if (*bp == '\0')
+	    break;
+	  ch_handled = 1;
+
+	  *swallowed_p++ = ch;
+	}
+      else
+	{
+	  bp = bpt;
+	}
+      if
+	(ch == *ep || *ep == '?')
+	{
+	  ep++;
+	  if (*ep == '\0')
+	    break;
+
+	  if (!ch_handled)
+	    *swallowed_p++ = ch;
+	  ch_handled =
+	    1;
+	}
+      else
+	{
+	  ep = exitmsg;
+	}
+
+      if (!ch_handled)
+	{
+	  char *p;
+
+	  /* Print out any characters which have been swallowed.  */
+	  for (p = swallowed; p < swallowed_p; ++p)
+	    putchar_unfiltered (*p);
+	  swallowed_p = swallowed;
+
+	  if ((ch != '\r' && ch != '\n') || swallowed_cr > 10)
+	    {
+	      putchar_unfiltered (ch);
+	      swallowed_cr = 10;
+	    }
+	  swallowed_cr++;
+
+	}
+    }
+  if (*bp == '\0')
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      expect_prompt ();
+    }
+  else
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer =
+	TARGET_SIGNAL_STOP;
+    }
+
+  timeout = old_timeout;
+  immediate_quit = old_immediate_quit;
+  return
+    0;
+}
+
+/* Return the name of register number REGNO in the form input and
+   output by hms.
+
+   Returns a pointer to a static buffer containing the answer.  */
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char *rn[] =
+  REGISTER_NAMES;
+
+  return rn[regno];
+}
+
+/* Read the remote registers.  */
+
+static int
+gethex (length, start, ok)
+     unsigned int length;
+     char *start;
+     int *ok;
+{
+  int result = 0;
+
+  while (length--)
+    {
+      result <<= 4;
+      if (*start >= 'a' && *start <= 'f')
+	{
+	  result += *start - 'a' + 10;
+	}
+      else if (*start >= 'A' &&
+	       *start <= 'F')
+	{
+	  result += *start - 'A' + 10;
+	}
+      else if
+	(*start >= '0' && *start <= '9')
+	{
+	  result += *start - '0';
+	}
+      else
+	*ok = 0;
+      start++;
+
+    }
+  return result;
+}
+static int
+timed_read (buf, n, timeout)
+     char
+      *buf;
+
+{
+  int i;
+  char c;
+
+  i = 0;
+  while (i < n)
+    {
+      c = readchar ();
+
+      if (c == 0)
+	return i;
+      buf[i] = c;
+      i++;
+
+    }
+  return i;
+}
+
+hms_write (a, l)
+     char *a;
+{
+  int i;
+
+  SERIAL_WRITE (desc, a, l);
+
+  if (!quiet || remote_debug)
+    {
+      printf_unfiltered ("<");
+      for (i = 0; i < l; i++)
+	{
+	  printf_unfiltered ("%c", a[i]);
+	}
+      printf_unfiltered (">");
+    }
+}
+
+hms_write_cr (s)
+     char *s;
+{
+  hms_write (s, strlen (s));
+  hms_write ("\r\n", 2);
+}
+
+#ifdef GDB_TARGET_IS_H8500
+
+/* H8/500 monitor reg dump looks like:
+
+   HMS>r
+   PC:8000 SR:070C .7NZ.. CP:00 DP:00 EP:00 TP:00 BR:00
+   R0-R7: FF5A 0001 F4FE F500 0000 F528 F528 F4EE
+   HMS>
+
+
+ */
+
+supply_val (n, size, ptr, segptr)
+     int n;
+     int size;
+     char *ptr;
+     char *segptr;
+{
+  int ok;
+  char raw[4];
+  switch (size)
+    {
+    case 2:
+      raw[0] = gethex (2, ptr, &ok);
+      raw[1] = gethex (2, ptr + 2, &ok);
+      supply_register (n, raw);
+      break;
+    case 1:
+      raw[0] = gethex (2, ptr, &ok);
+      supply_register (n, raw);
+      break;
+    case 4:
+      {
+	int v = gethex (4, ptr, &ok);
+	v |= gethex (2, segptr, &ok) << 16;
+	raw[0] = 0;
+	raw[1] = (v >> 16) & 0xff;
+	raw[2] = (v >> 8) & 0xff;
+	raw[3] = (v >> 0) & 0xff;
+	supply_register (n, raw);
+      }
+    }
+
+}
+static void
+hms_fetch_register (dummy)
+     int dummy;
+{
+#define REGREPLY_SIZE 108
+  char linebuf[REGREPLY_SIZE + 1];
+  int i;
+  int s;
+  int gottok;
+
+  LONGEST reg[NUM_REGS];
+  check_open ();
+
+  do
+    {
+
+      hms_write_cr ("r");
+      expect ("r");
+      s = timed_read (linebuf + 1, REGREPLY_SIZE, 1);
+
+      linebuf[REGREPLY_SIZE] = 0;
+      gottok = 0;
+      if (linebuf[3] == 'P' &&
+	  linebuf[4] == 'C' &&
+	  linebuf[5] == ':' &&
+	  linebuf[105] == 'H' &&
+	  linebuf[106] == 'M' &&
+	  linebuf[107] == 'S')
+	{
+
+	  /*
+	     012
+	     r**
+	     -------1---------2---------3---------4---------5-----
+	     345678901234567890123456789012345678901234567890123456
+	     PC:8000 SR:070C .7NZ.. CP:00 DP:00 EP:00 TP:00 BR:00**
+	     ---6---------7---------8---------9--------10----
+	     789012345678901234567890123456789012345678901234
+	     R0-R7: FF5A 0001 F4FE F500 0000 F528 F528 F4EE**
+
+	     56789
+	     HMS>
+	   */
+	  gottok = 1;
+
+
+	  supply_val (PC_REGNUM, 4, linebuf + 6, linebuf + 29);
+
+	  supply_val (CCR_REGNUM, 2, linebuf + 14);
+	  supply_val (SEG_C_REGNUM, 1, linebuf + 29);
+	  supply_val (SEG_D_REGNUM, 1, linebuf + 35);
+	  supply_val (SEG_E_REGNUM, 1, linebuf + 41);
+	  supply_val (SEG_T_REGNUM, 1, linebuf + 47);
+	  for (i = 0; i < 8; i++)
+	    {
+	      static int sr[8] =
+	      {35, 35, 35, 35,
+	       41, 41, 47, 47};
+
+	      char raw[4];
+	      char *src = linebuf + 64 + 5 * i;
+	      char *segsrc = linebuf + sr[i];
+	      supply_val (R0_REGNUM + i, 2, src);
+	      supply_val (PR0_REGNUM + i, 4, src, segsrc);
+	    }
+	}
+      if (!gottok)
+	{
+	  hms_write_cr ("");
+	  expect ("HMS>");
+	}
+    }
+  while (!gottok);
+}
+#endif
+
+#ifdef GDB_TARGET_IS_H8300
+static void
+hms_fetch_register (dummy)
+     int dummy;
+{
+#define REGREPLY_SIZE 79
+  char linebuf[REGREPLY_SIZE + 1];
+  int i;
+  int s;
+  int gottok;
+
+  ULONGEST reg[NUM_REGS];
+
+  check_open ();
+
+  do
+    {
+      hms_write_cr ("r");
+
+      s = timed_read (linebuf, 1, 1);
+
+      while (linebuf[0] != 'r')
+	s = timed_read (linebuf, 1, 1);
+
+      s = timed_read (linebuf + 1, REGREPLY_SIZE - 1, 1);
+
+      linebuf[REGREPLY_SIZE] = 0;
+      gottok = 0;
+      if (linebuf[0] == 'r' &&
+	  linebuf[3] == 'P' &&
+	  linebuf[4] == 'C' &&
+	  linebuf[5] == '=' &&
+	  linebuf[75] == 'H' &&
+	  linebuf[76] == 'M' &&
+	  linebuf[77] == 'S')
+	{
+	  /*
+	     PC=XXXX CCR=XX:XXXXXXXX R0-R7= XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+	     5436789012345678901234567890123456789012345678901234567890123456789012
+	     0      1         2         3         4         5         6
+	   */
+	  gottok = 1;
+
+	  reg[PC_REGNUM] = gethex (4, linebuf + 6, &gottok);
+	  reg[CCR_REGNUM] = gethex (2, linebuf + 15, &gottok);
+	  for (i = 0; i < 8; i++)
+	    {
+	      reg[i] = gethex (4, linebuf + 34 + 5 * i, &gottok);
+	    }
+	}
+    }
+  while (!gottok);
+  for (i = 0; i < NUM_REGS; i++)
+    {
+      char swapped[2];
+
+      swapped[1] = reg[i];
+      swapped[0] = (reg[i]) >> 8;
+
+      supply_register (i, swapped);
+    }
+}
+#endif
+/* Store register REGNO, or all if REGNO == -1.
+   Return errno value.  */
+static void
+hms_store_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	{
+	  hms_store_register (regno);
+	}
+    }
+  else
+    {
+      char *name = get_reg_name (regno);
+      char buffer[100];
+      /* Some regs dont really exist */
+      if (!(name[0] == 'p' && name[1] == 'r')
+	  && !(name[0] == 'c' && name[1] == 'y')
+	  && !(name[0] == 't' && name[1] == 'i')
+	  && !(name[0] == 'i' && name[1] == 'n'))
+	{
+	  sprintf (buffer, "r %s=%x", name, read_register (regno));
+	  hms_write_cr (buffer);
+	  expect_prompt ();
+	}
+    }
+}
+
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+void
+hms_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static CORE_ADDR
+translate_addr (addr)
+     CORE_ADDR addr;
+{
+
+  return (addr);
+
+}
+
+
+int
+hms_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* ignored */
+{
+
+  return len;
+}
+
+int
+hms_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  bfd_vma addr;
+  int done;
+  int todo;
+  char buffer[100];
+  done = 0;
+  hms_write_cr (".");
+  expect_prompt ();
+  while (done < len)
+    {
+      char *ptr = buffer;
+      int thisgo;
+      int idx;
+
+      thisgo = len - done;
+      if (thisgo > 20)
+	thisgo = 20;
+
+      sprintf (ptr, "M.B %4x =", memaddr + done);
+      ptr += 10;
+      for (idx = 0; idx < thisgo; idx++)
+	{
+	  sprintf (ptr, "%2x ", myaddr[idx + done]);
+	  ptr += 3;
+	}
+      hms_write_cr (buffer);
+      expect_prompt ();
+      done += thisgo;
+    }
+}
+
+void
+hms_files_info ()
+{
+  char *file = "nothing";
+
+  if (exec_bfd)
+    file = bfd_get_filename (exec_bfd);
+
+  if (exec_bfd)
+#ifdef __GO32__
+    printf_filtered ("\tAttached to DOS asynctsr and running program %s\n", file);
+#else
+    printf_filtered ("\tAttached to %s at %d baud and running program %s\n", dev_name, baudrate, file);
+#endif
+  printf_filtered ("\ton an H8/300 processor.\n");
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns errno value.
+   * sb/sh instructions don't work on unaligned addresses, when TU=1.
+ */
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns errno value.  */
+int
+hms_read_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  /* Align to nearest low 16 bits */
+  int i;
+
+  CORE_ADDR start = memaddr;
+  CORE_ADDR end = memaddr + len - 1;
+
+  int ok = 1;
+
+  /*
+     AAAA: XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX '................'
+     012345678901234567890123456789012345678901234567890123456789012345
+     0         1         2         3         4         5         6
+   */
+  char buffer[66];
+
+  if (memaddr & 0xf)
+    abort ();
+  if (len != 16)
+    abort ();
+
+  sprintf (buffer, "m %4x %4x", start & 0xffff, end & 0xffff);
+
+  flush ();
+  hms_write_cr (buffer);
+  /* drop the echo and newline */
+  for (i = 0; i < 13; i++)
+    readchar ();
+
+  /* Grab the lines as they come out and fill the area */
+  /* Skip over cr */
+  while (1)
+    {
+      int p;
+      int i;
+      int addr;
+      size_t idx;
+
+      char byte[16];
+
+      buffer[0] = readchar ();
+      while (buffer[0] == '\r'
+	     || buffer[0] == '\n')
+	buffer[0] = readchar ();
+
+      if (buffer[0] == 'M')
+	break;
+
+      for (i = 1; i < 50; i++)
+	{
+	  buffer[i] = readchar ();
+	}
+      /* sometimes we loose characters in the ascii representation of the 
+         data.  I don't know where.  So just scan for the end of line */
+      i = readchar ();
+      while (i != '\n' && i != '\r')
+	i = readchar ();
+
+      /* Now parse the line */
+
+      addr = gethex (4, buffer, &ok);
+      idx = 6;
+      for (p = 0; p < 16; p += 2)
+	{
+	  byte[p] = gethex (2, buffer + idx, &ok);
+	  byte[p + 1] = gethex (2, buffer + idx + 2, &ok);
+	  idx += 5;
+	}
+
+      for (p = 0; p < 16; p++)
+	{
+	  if (addr + p >= memaddr &&
+	      addr + p < memaddr + len)
+	    {
+	      myaddr[(addr + p) - memaddr] = byte[p];
+
+	    }
+
+	}
+    }
+#ifdef GDB_TARGET_IS_H8500
+  expect ("ore>");
+#endif
+#ifdef GDB_TARGET_IS_H8300
+  expect ("emory>");
+#endif
+  hms_write_cr (".");
+
+  expect_prompt ();
+  return len;
+}
+
+
+
+#define MAX_BREAKS	16
+static int num_brkpts = 0;
+static int
+hms_insert_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;		/* Throw away, let hms save instructions */
+{
+  check_open ();
+
+  if (num_brkpts < MAX_BREAKS)
+    {
+      char buffer[100];
+
+      num_brkpts++;
+      sprintf (buffer, "b %x", addr & 0xffff);
+      hms_write_cr (buffer);
+      expect_prompt ();
+      return (0);
+    }
+  else
+    {
+      fprintf_filtered (gdb_stderr,
+		      "Too many break points, break point not installed\n");
+      return (1);
+    }
+
+}
+static int
+hms_remove_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;		/* Throw away, let hms save instructions */
+{
+  if (num_brkpts > 0)
+    {
+      char buffer[100];
+
+      num_brkpts--;
+      sprintf (buffer, "b - %x", addr & 0xffff);
+      hms_write_cr (buffer);
+      expect_prompt ();
+
+    }
+  return (0);
+}
+
+/* Clear the hmss notion of what the break points are */
+static int
+hms_clear_breakpoints ()
+{
+
+  if (is_open)
+    {
+      hms_write_cr ("b -");
+      expect_prompt ();
+    }
+  num_brkpts = 0;
+}
+static void
+hms_mourn ()
+{
+  hms_clear_breakpoints ();
+  unpush_target (&hms_ops);
+  generic_mourn_inferior ();
+}
+
+/* Put a command string, in args, out to the hms.  The hms is assumed to
+   be in raw mode, all writing/reading done through desc.
+   Ouput from the hms is placed on the users terminal until the
+   prompt from the hms is seen.
+   FIXME: Can't handle commands that take input.  */
+
+void
+hms_com (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  check_open ();
+
+  if (!args)
+    return;
+
+  /* Clear all input so only command relative output is displayed */
+
+  hms_write_cr (args);
+/*  hms_write ("\030", 1); */
+  expect_prompt ();
+}
+
+static void
+hms_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  unsigned int prl;
+  char *p;
+
+  if (name == 0)
+    {
+      name = "";
+    }
+  if (is_open)
+    hms_close (0);
+  dev_name = strdup (name);
+
+  if (!(desc = SERIAL_OPEN (dev_name)))
+    perror_with_name ((char *) dev_name);
+
+  SERIAL_RAW (desc);
+  is_open = 1;
+  push_target (&hms_ops);
+  dcache_ptr = dcache_init (hms_read_inferior_memory,
+			    hms_write_inferior_memory);
+  remote_dcache = 1;
+  /* Hello?  Are you there?  */
+  SERIAL_WRITE (desc, "\r\n", 2);
+  expect_prompt ();
+
+  /* Clear any break points */
+  hms_clear_breakpoints ();
+
+  printf_filtered ("Connected to remote board running HMS monitor.\n");
+  add_commands ();
+/*  hms_drain (); */
+}
+
+/* Define the target subroutine names */
+
+struct target_ops hms_ops ;
+
+static void 
+init_hms_ops(void)
+{
+  hms_ops.to_shortname =   "hms";
+  hms_ops.to_longname =   "Remote HMS monitor";
+  hms_ops.to_doc =   "Use the H8 evaluation board running the HMS monitor connected\n\
+by a serial line.";
+  hms_ops.to_open =   hms_open;
+  hms_ops.to_close =   hms_close;
+  hms_ops.to_attach =   0;
+  hms_ops.to_post_attach = NULL;
+  hms_ops.to_require_attach = NULL;
+  hms_ops.to_detach =   hms_detach;
+  hms_ops.to_require_detach = NULL;
+  hms_ops.to_resume =   hms_resume;
+  hms_ops.to_wait  =   hms_wait;
+  hms_ops.to_post_wait = NULL;
+  hms_ops.to_fetch_registers  =   hms_fetch_register;
+  hms_ops.to_store_registers  =   hms_store_register;
+  hms_ops.to_prepare_to_store =   hms_prepare_to_store;
+  hms_ops.to_xfer_memory  =   hms_xfer_inferior_memory;
+  hms_ops.to_files_info  =   hms_files_info;
+  hms_ops.to_insert_breakpoint =   hms_insert_breakpoint;
+  hms_ops.to_remove_breakpoint =   hms_remove_breakpoint;
+  hms_ops.to_terminal_init  =   0;
+  hms_ops.to_terminal_inferior =   0;
+  hms_ops.to_terminal_ours_for_output =   0;
+  hms_ops.to_terminal_ours  =   0;
+  hms_ops.to_terminal_info  =   0;
+  hms_ops.to_kill  =   hms_kill;	
+  hms_ops.to_load  =   generic_load;
+  hms_ops.to_lookup_symbol =   0;
+  hms_ops.to_create_inferior =   hms_create_inferior;
+  hms_ops.to_post_startup_inferior = NULL;
+  hms_ops.to_acknowledge_created_inferior = NULL;
+  hms_ops.to_clone_and_follow_inferior = NULL;
+  hms_ops.to_post_follow_inferior_by_clone = NULL;
+  hms_ops.to_insert_fork_catchpoint = NULL;
+  hms_ops.to_remove_fork_catchpoint = NULL;
+  hms_ops.to_insert_vfork_catchpoint = NULL;
+  hms_ops.to_remove_vfork_catchpoint = NULL;
+  hms_ops.to_has_forked = NULL;
+  hms_ops.to_has_vforked = NULL;
+  hms_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  hms_ops.to_post_follow_vfork = NULL;
+  hms_ops.to_insert_exec_catchpoint = NULL;
+  hms_ops.to_remove_exec_catchpoint = NULL;
+  hms_ops.to_has_execd = NULL;
+  hms_ops.to_reported_exec_events_per_exec_call = NULL;
+  hms_ops.to_has_exited = NULL;
+  hms_ops.to_mourn_inferior =   hms_mourn;
+  hms_ops.to_can_run  =   0;
+  hms_ops.to_notice_signals =   0;
+  hms_ops.to_thread_alive  =   0;
+  hms_ops.to_stop  =   0;
+  hms_ops.to_pid_to_exec_file = NULL;
+  hms_ops.to_core_file_to_sym_file = NULL;			
+  hms_ops.to_stratum =   process_stratum;
+  hms_ops.DONT_USE =   0;	
+  hms_ops.to_has_all_memory =   1;
+  hms_ops.to_has_memory =   1;
+  hms_ops.to_has_stack =   1;
+  hms_ops.to_has_registers =   1;
+  hms_ops.to_has_execution =   1;
+  hms_ops.to_sections =   0;
+  hms_ops.to_sections_end =   0;			
+  hms_ops.to_magic =   OPS_MAGIC;		
+};
+
+hms_quiet ()			/* FIXME - this routine can be removed after Dec '94 */
+{
+  quiet = !quiet;
+  if (quiet)
+    printf_filtered ("Snoop disabled\n");
+  else
+    printf_filtered ("Snoop enabled\n");
+
+  printf_filtered ("`snoop' is obsolete, please use `set remotedebug'.\n");
+}
+
+hms_device (s)
+     char *s;
+{
+  if (s)
+    {
+      dev_name = get_word (&s);
+    }
+}
+
+static
+hms_speed (s)
+     char *s;
+{
+  check_open ();
+
+  if (s)
+    {
+      char buffer[100];
+      int newrate = atoi (s);
+      int which = 0;
+
+      if (SERIAL_SETBAUDRATE (desc, newrate))
+	error ("Can't use %d baud\n", newrate);
+
+      printf_filtered ("Checking target is in sync\n");
+
+      printf_filtered ("Sending commands to set target to %d\n",
+		       baudrate);
+
+      sprintf (buffer, "tm %d. N 8 1", baudrate);
+      hms_write_cr (buffer);
+    }
+}
+
+/***********************************************************************/
+
+static void
+hms_drain (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  int c;
+  while (1)
+    {
+      c = SERIAL_READCHAR (desc, 1);
+      if (c == SERIAL_TIMEOUT)
+	break;
+      if (c == SERIAL_ERROR)
+	break;
+      if (c > ' ' && c < 127)
+	printf ("%c", c & 0xff);
+      else
+	printf ("<%x>", c & 0xff);
+    }
+}
+
+static void
+add_commands ()
+{
+
+  add_com ("hms_drain", class_obscure, hms_drain,
+	   "Drain pending hms text buffers.");
+}
+
+static void
+remove_commands ()
+{
+  extern struct cmd_list_element *cmdlist;
+  delete_cmd ("hms-drain", &cmdlist);
+}
+
+
+void
+_initialize_remote_hms ()
+{
+  init_hms_ops() ;
+  add_target (&hms_ops);
+
+  add_com ("hms <command>", class_obscure, hms_com,
+	   "Send a command to the HMS monitor.");
+
+  /* FIXME - hms_quiet and `snoop' can be removed after Dec '94 */
+  add_com ("snoop", class_obscure, hms_quiet,
+	   "Show what commands are going to the monitor (OBSOLETE - see 'set remotedebug')");
+
+  add_com ("device", class_obscure, hms_device,
+	   "Set the terminal line for HMS communications");
+
+  add_com ("speed", class_obscure, hms_speed,
+	   "Set the terminal line speed for HMS communications");
+
+  dev_name = NULL;
+}
+#endif
+
diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c
new file mode 100644
index 0000000..c92f8b7
--- /dev/null
+++ b/gdb/remote-mips.c
@@ -0,0 +1,3655 @@
+/* Remote debugging interface for MIPS remote debugging protocol.
+   Copyright 1993, 1994, 1995 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Ian Lance Taylor
+   <ian@cygnus.com>.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "serial.h"
+#include "target.h"
+#include "remote-utils.h"
+#include "gdb_string.h"
+
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+/* Microsoft C's stat.h doesn't define all the POSIX file modes.  */
+#ifndef S_IROTH
+#define S_IROTH S_IREAD
+#endif
+
+extern void mips_set_processor_type_command PARAMS ((char *, int));
+
+
+/* Breakpoint types.  Values 0, 1, and 2 must agree with the watch
+   types passed by breakpoint.c to target_insert_watchpoint.
+   Value 3 is our own invention, and is used for ordinary instruction
+   breakpoints.  Value 4 is used to mark an unused watchpoint in tables.  */
+enum break_type {
+  BREAK_WRITE,	/* 0 */
+  BREAK_READ,	/* 1 */
+  BREAK_ACCESS,	/* 2 */
+  BREAK_FETCH,	/* 3 */
+  BREAK_UNUSED	/* 4 */
+};
+
+/* Prototypes for local functions.  */
+
+static int mips_readchar PARAMS ((int timeout));
+
+static int mips_receive_header PARAMS ((unsigned char *hdr, int *pgarbage,
+					int ch, int timeout));
+
+static int mips_receive_trailer PARAMS ((unsigned char *trlr, int *pgarbage,
+					 int *pch, int timeout));
+
+static int mips_cksum PARAMS ((const unsigned char *hdr,
+			       const unsigned char *data,
+			       int len));
+
+static void mips_send_packet PARAMS ((const char *s, int get_ack));
+
+static void mips_send_command PARAMS ((const char *cmd, int prompt));
+
+static int mips_receive_packet PARAMS ((char *buff, int throw_error,
+					int timeout));
+
+static CORE_ADDR mips_request PARAMS ((int cmd, CORE_ADDR addr,
+				 CORE_ADDR data, int *perr, int timeout,
+				 char *buff));
+
+static void mips_initialize PARAMS ((void));
+
+static void mips_open PARAMS ((char *name, int from_tty));
+
+static void pmon_open PARAMS ((char *name, int from_tty));
+
+static void ddb_open PARAMS ((char *name, int from_tty));
+
+static void lsi_open PARAMS ((char *name, int from_tty));
+
+static void mips_close PARAMS ((int quitting));
+
+static void mips_detach PARAMS ((char *args, int from_tty));
+
+static void mips_resume PARAMS ((int pid, int step,
+				 enum target_signal siggnal));
+
+static int mips_wait PARAMS ((int pid, struct target_waitstatus *status));
+
+static int mips_map_regno PARAMS ((int regno));
+
+static void mips_fetch_registers PARAMS ((int regno));
+
+static void mips_prepare_to_store PARAMS ((void));
+
+static void mips_store_registers PARAMS ((int regno));
+
+static unsigned int mips_fetch_word PARAMS ((CORE_ADDR addr));
+
+static int mips_store_word PARAMS ((CORE_ADDR addr, unsigned int value,
+				    char *old_contents));
+
+static int mips_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
+				     int write, struct target_ops *ignore));
+
+static void mips_files_info PARAMS ((struct target_ops *ignore));
+
+static void mips_create_inferior PARAMS ((char *execfile, char *args,
+					  char **env));
+
+static void mips_mourn_inferior PARAMS ((void));
+
+static int pmon_makeb64 PARAMS ((unsigned long v, char *p, int n, int *chksum));
+
+static int pmon_zeroset PARAMS ((int recsize, char **buff, int *amount,
+                                 unsigned int *chksum));
+
+static int pmon_checkset PARAMS ((int recsize, char **buff, int *value));
+
+static void pmon_make_fastrec PARAMS ((char **outbuf, unsigned char *inbuf,
+                                       int *inptr, int inamount, int *recsize,
+                                       unsigned int *csum, unsigned int *zerofill));
+
+static int pmon_check_ack PARAMS ((char *mesg));
+
+static void pmon_start_download PARAMS ((void));
+
+static void pmon_end_download PARAMS ((int final, int bintotal));
+
+static void pmon_download PARAMS ((char *buffer, int length));
+
+static void pmon_load_fast PARAMS ((char *file));
+
+static void mips_load PARAMS ((char *file, int from_tty));
+
+static int mips_make_srec PARAMS ((char *buffer, int type, CORE_ADDR memaddr,
+				   unsigned char *myaddr, int len));
+
+static int set_breakpoint PARAMS ((CORE_ADDR addr, int len,
+				   enum break_type type));
+
+static int clear_breakpoint PARAMS ((CORE_ADDR addr, int len,
+				     enum break_type type));
+
+static int common_breakpoint PARAMS ((int set, CORE_ADDR addr, int len,
+				      enum break_type type));
+
+/* Forward declarations.  */
+extern struct target_ops mips_ops;
+extern struct target_ops pmon_ops;
+extern struct target_ops ddb_ops;
+
+/* The MIPS remote debugging interface is built on top of a simple
+   packet protocol.  Each packet is organized as follows:
+
+   SYN	The first character is always a SYN (ASCII 026, or ^V).  SYN
+	may not appear anywhere else in the packet.  Any time a SYN is
+	seen, a new packet should be assumed to have begun.
+
+   TYPE_LEN
+	This byte contains the upper five bits of the logical length
+	of the data section, plus a single bit indicating whether this
+	is a data packet or an acknowledgement.  The documentation
+	indicates that this bit is 1 for a data packet, but the actual
+	board uses 1 for an acknowledgement.  The value of the byte is
+		0x40 + (ack ? 0x20 : 0) + (len >> 6)
+	(we always have 0 <= len < 1024).  Acknowledgement packets do
+	not carry data, and must have a data length of 0.
+
+   LEN1 This byte contains the lower six bits of the logical length of
+	the data section.  The value is
+	 	0x40 + (len & 0x3f)
+
+   SEQ	This byte contains the six bit sequence number of the packet.
+	The value is
+		0x40 + seq
+	An acknowlegment packet contains the sequence number of the
+	packet being acknowledged plus 1 modulo 64.  Data packets are
+	transmitted in sequence.  There may only be one outstanding
+	unacknowledged data packet at a time.  The sequence numbers
+	are independent in each direction.  If an acknowledgement for
+	the previous packet is received (i.e., an acknowledgement with
+	the sequence number of the packet just sent) the packet just
+	sent should be retransmitted.  If no acknowledgement is
+	received within a timeout period, the packet should be
+	retransmitted.  This has an unfortunate failure condition on a
+	high-latency line, as a delayed acknowledgement may lead to an
+	endless series of duplicate packets.
+
+   DATA	The actual data bytes follow.  The following characters are
+	escaped inline with DLE (ASCII 020, or ^P):
+		SYN (026)	DLE S
+		DLE (020)	DLE D
+		^C  (003)	DLE C
+		^S  (023)	DLE s
+		^Q  (021)	DLE q
+	The additional DLE characters are not counted in the logical
+	length stored in the TYPE_LEN and LEN1 bytes.
+
+   CSUM1
+   CSUM2
+   CSUM3
+	These bytes contain an 18 bit checksum of the complete
+	contents of the packet excluding the SEQ byte and the
+	CSUM[123] bytes.  The checksum is simply the twos complement
+	addition of all the bytes treated as unsigned characters.  The
+	values of the checksum bytes are:
+		CSUM1: 0x40 + ((cksum >> 12) & 0x3f)
+		CSUM2: 0x40 + ((cksum >> 6) & 0x3f)
+		CSUM3: 0x40 + (cksum & 0x3f)
+
+   It happens that the MIPS remote debugging protocol always
+   communicates with ASCII strings.  Because of this, this
+   implementation doesn't bother to handle the DLE quoting mechanism,
+   since it will never be required.  */
+
+/* The SYN character which starts each packet.  */
+#define SYN '\026'
+
+/* The 0x40 used to offset each packet (this value ensures that all of
+   the header and trailer bytes, other than SYN, are printable ASCII
+   characters).  */
+#define HDR_OFFSET 0x40
+
+/* The indices of the bytes in the packet header.  */
+#define HDR_INDX_SYN 0
+#define HDR_INDX_TYPE_LEN 1
+#define HDR_INDX_LEN1 2
+#define HDR_INDX_SEQ 3
+#define HDR_LENGTH 4
+
+/* The data/ack bit in the TYPE_LEN header byte.  */
+#define TYPE_LEN_DA_BIT 0x20
+#define TYPE_LEN_DATA 0
+#define TYPE_LEN_ACK TYPE_LEN_DA_BIT
+
+/* How to compute the header bytes.  */
+#define HDR_SET_SYN(data, len, seq) (SYN)
+#define HDR_SET_TYPE_LEN(data, len, seq) \
+  (HDR_OFFSET \
+   + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \
+   + (((len) >> 6) & 0x1f))
+#define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f))
+#define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq))
+
+/* Check that a header byte is reasonable.  */
+#define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET)
+
+/* Get data from the header.  These macros evaluate their argument
+   multiple times.  */
+#define HDR_IS_DATA(hdr) \
+  (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA)
+#define HDR_GET_LEN(hdr) \
+  ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f)))
+#define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f)
+
+/* The maximum data length.  */
+#define DATA_MAXLEN 1023
+
+/* The trailer offset.  */
+#define TRLR_OFFSET HDR_OFFSET
+
+/* The indices of the bytes in the packet trailer.  */
+#define TRLR_INDX_CSUM1 0
+#define TRLR_INDX_CSUM2 1
+#define TRLR_INDX_CSUM3 2
+#define TRLR_LENGTH 3
+
+/* How to compute the trailer bytes.  */
+#define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f))
+#define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >>  6) & 0x3f))
+#define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum)      ) & 0x3f))
+
+/* Check that a trailer byte is reasonable.  */
+#define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET)
+
+/* Get data from the trailer.  This evaluates its argument multiple
+   times.  */
+#define TRLR_GET_CKSUM(trlr) \
+  ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \
+   + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) <<  6) \
+   + ((trlr)[TRLR_INDX_CSUM3] & 0x3f))
+
+/* The sequence number modulos.  */
+#define SEQ_MODULOS (64)
+
+/* PMON commands to load from the serial port or UDP socket.  */
+#define LOAD_CMD	"load -b -s tty0\r"
+#define LOAD_CMD_UDP	"load -b -s udp\r"
+
+/* The target vectors for the four different remote MIPS targets.
+   These are initialized with code in _initialize_remote_mips instead
+   of static initializers, to make it easier to extend the target_ops
+   vector later.  */
+struct target_ops mips_ops, pmon_ops, ddb_ops, lsi_ops;
+
+enum mips_monitor_type {
+  /* IDT/SIM monitor being used: */
+  MON_IDT,
+  /* PMON monitor being used: */
+  MON_PMON, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov  9 1995 17:19:50 */
+  MON_DDB,  /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems,  Thu Jun 6 09:28:40 PDT 1996 */
+  MON_LSI,  /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */
+  /* Last and unused value, for sizing vectors, etc. */
+  MON_LAST
+};
+static enum mips_monitor_type mips_monitor = MON_LAST;
+
+/* The monitor prompt text.  If the user sets the PMON prompt
+   to some new value, the GDB `set monitor-prompt' command must also
+   be used to inform GDB about the expected prompt.  Otherwise, GDB
+   will not be able to connect to PMON in mips_initialize().
+   If the `set monitor-prompt' command is not used, the expected
+   default prompt will be set according the target:
+	target		prompt
+	-----		-----
+	pmon		PMON> 
+	ddb		NEC010>
+	lsi		PMON>
+*/
+static char *mips_monitor_prompt;
+
+/* Set to 1 if the target is open.  */
+static int mips_is_open;
+
+/* Currently active target description (if mips_is_open == 1) */
+static struct target_ops *current_ops;
+
+/* Set to 1 while the connection is being initialized.  */
+static int mips_initializing;
+
+/* Set to 1 while the connection is being brought down.  */
+static int mips_exiting;
+
+/* The next sequence number to send.  */
+static unsigned int mips_send_seq;
+
+/* The next sequence number we expect to receive.  */
+static unsigned int mips_receive_seq;
+
+/* The time to wait before retransmitting a packet, in seconds.  */
+static int mips_retransmit_wait = 3;
+
+/* The number of times to try retransmitting a packet before giving up.  */
+static int mips_send_retries = 10;
+
+/* The number of garbage characters to accept when looking for an
+   SYN for the next packet.  */
+static int mips_syn_garbage = 1050;
+
+/* The time to wait for a packet, in seconds.  */
+static int mips_receive_wait = 5;
+
+/* Set if we have sent a packet to the board but have not yet received
+   a reply.  */
+static int mips_need_reply = 0;
+
+/* Handle used to access serial I/O stream.  */
+static serial_t mips_desc;
+
+/* UDP handle used to download files to target.  */
+static serial_t udp_desc;
+static int udp_in_use;
+
+/* TFTP filename used to download files to DDB board, in the form
+   host:filename.  */
+static char *tftp_name;		/* host:filename */
+static char *tftp_localname;	/* filename portion of above */
+static int tftp_in_use;
+static FILE *tftp_file;
+
+/* Counts the number of times the user tried to interrupt the target (usually
+   via ^C.  */
+static int interrupt_count;
+
+/* If non-zero, means that the target is running. */
+static int mips_wait_flag = 0;
+
+/* If non-zero, monitor supports breakpoint commands. */
+static monitor_supports_breakpoints = 0;
+
+/* Data cache header.  */
+
+#if 0	/* not used (yet?) */
+static DCACHE *mips_dcache;
+#endif
+
+/* Non-zero means that we've just hit a read or write watchpoint */
+static int hit_watchpoint;
+
+/* Table of breakpoints/watchpoints (used only on LSI PMON target).
+   The table is indexed by a breakpoint number, which is an integer
+   from 0 to 255 returned by the LSI PMON when a breakpoint is set.
+*/
+#define MAX_LSI_BREAKPOINTS 256
+struct lsi_breakpoint_info
+{
+  enum break_type type;		/* type of breakpoint */
+  CORE_ADDR addr;		/* address of breakpoint */
+  int len;			/* length of region being watched */
+  unsigned long value;		/* value to watch */
+} lsi_breakpoints [MAX_LSI_BREAKPOINTS];
+
+/* Error/warning codes returned by LSI PMON for breakpoint commands.
+   Warning values may be ORed together; error values may not.  */
+#define W_WARN	0x100	/* This bit is set if the error code is a warning */
+#define W_MSK   0x101	/* warning: Range feature is supported via mask */
+#define W_VAL   0x102	/* warning: Value check is not supported in hardware */
+#define W_QAL   0x104	/* warning: Requested qualifiers are not supported in hardware */
+
+#define E_ERR	0x200	/* This bit is set if the error code is an error */
+#define E_BPT   0x200	/* error: No such breakpoint number */
+#define E_RGE   0x201	/* error: Range is not supported */
+#define E_QAL   0x202	/* error: The requested qualifiers can not be used */
+#define E_OUT   0x203	/* error: Out of hardware resources */
+#define E_NON   0x204	/* error: Hardware breakpoint not supported */
+
+struct lsi_error
+{
+  int code;		/* error code */
+  char *string;		/* string associated with this code */
+};
+
+struct lsi_error lsi_warning_table[] =
+{
+  { W_MSK,	"Range feature is supported via mask" },
+  { W_VAL,	"Value check is not supported in hardware" },
+  { W_QAL,	"Requested qualifiers are not supported in hardware" },
+  { 0,		NULL }
+};
+
+struct lsi_error lsi_error_table[] =
+{  
+  { E_BPT,	"No such breakpoint number" },
+  { E_RGE,	"Range is not supported" },
+  { E_QAL,	"The requested qualifiers can not be used" },
+  { E_OUT,	"Out of hardware resources" },
+  { E_NON,	"Hardware breakpoint not supported" },
+  { 0,		NULL }
+};
+
+/* Set to 1 with the 'set monitor-warnings' command to enable printing
+   of warnings returned by PMON when hardware breakpoints are used.  */
+static int monitor_warnings;
+
+
+static void
+close_ports()
+{
+  mips_is_open = 0;
+  SERIAL_CLOSE (mips_desc);
+
+  if (udp_in_use)
+    {
+      SERIAL_CLOSE (udp_desc);
+      udp_in_use = 0;
+    }
+  tftp_in_use = 0;
+}
+    
+/* Handle low-level error that we can't recover from.  Note that just
+   error()ing out from target_wait or some such low-level place will cause
+   all hell to break loose--the rest of GDB will tend to get left in an
+   inconsistent state.  */
+
+static NORETURN void
+#ifdef ANSI_PROTOTYPES
+mips_error (char *string, ...)
+#else
+mips_error (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  char *string;
+  va_start (args);
+  string = va_arg (args, char *);
+#endif
+ 
+  target_terminal_ours ();
+  wrap_here("");			/* Force out any buffered output */
+  gdb_flush (gdb_stdout);
+  if (error_pre_print)
+    fprintf_filtered (gdb_stderr, error_pre_print);
+  vfprintf_filtered (gdb_stderr, string, args);
+  fprintf_filtered (gdb_stderr, "\n");
+  va_end (args);
+  gdb_flush (gdb_stderr);
+
+  /* Clean up in such a way that mips_close won't try to talk to the
+     board (it almost surely won't work since we weren't able to talk to
+     it).  */
+  close_ports ();
+
+  printf_unfiltered ("Ending remote MIPS debugging.\n");
+  target_mourn_inferior ();
+
+  return_to_top_level (RETURN_ERROR);
+}
+
+/* putc_readable - print a character, displaying non-printable chars in
+   ^x notation or in hex.  */
+
+static void
+putc_readable (ch)
+     int ch;
+{
+  if (ch == '\n')
+    putchar_unfiltered ('\n');
+  else if (ch == '\r')
+    printf_unfiltered ("\\r");
+  else if (ch < 0x20)	/* ASCII control character */
+    printf_unfiltered ("^%c", ch + '@');
+  else if (ch >= 0x7f)	/* non-ASCII characters (rubout or greater) */
+    printf_unfiltered ("[%02x]", ch & 0xff);
+  else
+    putchar_unfiltered (ch);
+}
+
+
+/* puts_readable - print a string, displaying non-printable chars in
+   ^x notation or in hex.  */
+
+static void
+puts_readable (string)
+     char *string;
+{
+  int c;
+
+  while ((c = *string++) != '\0')
+    putc_readable (c);
+}
+
+
+/* Wait until STRING shows up in mips_desc.  Returns 1 if successful, else 0 if
+   timed out.  TIMEOUT specifies timeout value in seconds.
+*/
+
+int
+mips_expect_timeout (string, timeout)
+     char *string;
+     int timeout;
+{
+  char *p = string;
+
+  if (remote_debug)
+    {
+      printf_unfiltered ("Expected \"");
+      puts_readable (string);
+      printf_unfiltered ("\", got \"");
+    }
+
+  immediate_quit = 1;
+  while (1)
+    {
+      int c;
+
+/* Must use SERIAL_READCHAR here cuz mips_readchar would get confused if we
+   were waiting for the mips_monitor_prompt... */
+
+      c = SERIAL_READCHAR (mips_desc, timeout);
+
+      if (c == SERIAL_TIMEOUT)
+	{
+	  if (remote_debug)
+	    printf_unfiltered ("\": FAIL\n");
+	  return 0;
+	}
+
+      if (remote_debug)
+	putc_readable (c);
+
+      if (c == *p++)
+	{	
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      if (remote_debug)
+	      printf_unfiltered ("\": OK\n");
+	      return 1;
+	    }
+	}
+      else
+	{
+	  p = string;
+	  if (c == *p)
+	    p++;
+	}
+    }
+}
+
+/* Wait until STRING shows up in mips_desc.  Returns 1 if successful, else 0 if
+   timed out.  The timeout value is hard-coded to 2 seconds.  Use
+   mips_expect_timeout if a different timeout value is needed.
+*/
+
+int
+mips_expect (string)
+     char *string;
+{
+    return mips_expect_timeout (string, 2);
+}
+
+/* Read the required number of characters into the given buffer (which
+   is assumed to be large enough). The only failure is a timeout. */
+int
+mips_getstring (string, n)
+     char *string;
+     int n;
+{
+  char *p = string;
+  int c;
+
+  immediate_quit = 1;
+  while (n > 0)
+    {
+      c = SERIAL_READCHAR (mips_desc, 2);
+
+      if (c == SERIAL_TIMEOUT) {
+        fprintf_unfiltered (gdb_stderr,
+			    "Failed to read %d characters from target (TIMEOUT)\n", n);
+	return 0;
+      }
+
+      *p++ = c;
+      n--;
+    }
+
+  return 1;
+}
+
+/* Read a character from the remote, aborting on error.  Returns
+   SERIAL_TIMEOUT on timeout (since that's what SERIAL_READCHAR
+   returns).  FIXME: If we see the string mips_monitor_prompt from
+   the board, then we are debugging on the main console port, and we
+   have somehow dropped out of remote debugging mode.  In this case,
+   we automatically go back in to remote debugging mode.  This is a
+   hack, put in because I can't find any way for a program running on
+   the remote board to terminate without also ending remote debugging
+   mode.  I assume users won't have any trouble with this; for one
+   thing, the IDT documentation generally assumes that the remote
+   debugging port is not the console port.  This is, however, very
+   convenient for DejaGnu when you only have one connected serial
+   port.  */
+
+static int
+mips_readchar (timeout)
+     int timeout;
+{
+  int ch;
+  static int state = 0;
+  int mips_monitor_prompt_len = strlen (mips_monitor_prompt);
+
+#ifdef MAINTENANCE_CMDS
+  {
+    int i;
+
+    i = timeout;
+    if (i == -1 && watchdog > 0)
+     i = watchdog;
+  }
+#endif
+
+  if (state == mips_monitor_prompt_len)
+    timeout = 1;
+  ch = SERIAL_READCHAR (mips_desc, timeout);
+#ifdef MAINTENANCE_CMDS
+  if (ch == SERIAL_TIMEOUT && timeout == -1) /* Watchdog went off */
+    {
+      target_mourn_inferior ();
+      error ("Watchdog has expired.  Target detached.\n");
+    }
+#endif
+  if (ch == SERIAL_EOF)
+    mips_error ("End of file from remote");
+  if (ch == SERIAL_ERROR)
+    mips_error ("Error reading from remote: %s", safe_strerror (errno));
+  if (remote_debug > 1)
+    {
+      /* Don't use _filtered; we can't deal with a QUIT out of
+	 target_wait, and I think this might be called from there.  */
+      if (ch != SERIAL_TIMEOUT)
+	printf_unfiltered ("Read '%c' %d 0x%x\n", ch, ch, ch);
+      else
+	printf_unfiltered ("Timed out in read\n");
+    }
+
+  /* If we have seen mips_monitor_prompt and we either time out, or
+     we see a @ (which was echoed from a packet we sent), reset the
+     board as described above.  The first character in a packet after
+     the SYN (which is not echoed) is always an @ unless the packet is
+     more than 64 characters long, which ours never are.  */
+  if ((ch == SERIAL_TIMEOUT || ch == '@')
+      && state == mips_monitor_prompt_len
+      && ! mips_initializing
+      && ! mips_exiting)
+    {
+      if (remote_debug > 0)
+	/* Don't use _filtered; we can't deal with a QUIT out of
+	   target_wait, and I think this might be called from there.  */
+	printf_unfiltered ("Reinitializing MIPS debugging mode\n");
+
+      mips_need_reply = 0;
+      mips_initialize ();
+
+      state = 0;
+
+      /* At this point, about the only thing we can do is abort the command
+	 in progress and get back to command level as quickly as possible. */
+
+      error ("Remote board reset, debug protocol re-initialized.");
+    }
+
+  if (ch == mips_monitor_prompt[state])
+    ++state;
+  else
+    state = 0;
+
+  return ch;
+}
+
+/* Get a packet header, putting the data in the supplied buffer.
+   PGARBAGE is a pointer to the number of garbage characters received
+   so far.  CH is the last character received.  Returns 0 for success,
+   or -1 for timeout.  */
+
+static int
+mips_receive_header (hdr, pgarbage, ch, timeout)
+     unsigned char *hdr;
+     int *pgarbage;
+     int ch;
+     int timeout;
+{
+  int i;
+
+  while (1)
+    {
+      /* Wait for a SYN.  mips_syn_garbage is intended to prevent
+	 sitting here indefinitely if the board sends us one garbage
+	 character per second.  ch may already have a value from the
+	 last time through the loop.  */
+      while (ch != SYN)
+	{
+	  ch = mips_readchar (timeout);
+	  if (ch == SERIAL_TIMEOUT)
+           return -1;
+	  if (ch != SYN)
+	    {
+	      /* Printing the character here lets the user of gdb see
+		 what the program is outputting, if the debugging is
+		 being done on the console port.  Don't use _filtered;
+		 we can't deal with a QUIT out of target_wait.  */
+	      if (! mips_initializing || remote_debug > 0)
+		{
+		  putc_readable (ch);
+		  gdb_flush (gdb_stdout);
+		}
+
+	      ++*pgarbage;
+	      if (mips_syn_garbage > 0
+		  && *pgarbage > mips_syn_garbage)
+		mips_error ("Debug protocol failure:  more than %d characters before a sync.", 
+			    mips_syn_garbage);
+	    }
+	}
+
+      /* Get the packet header following the SYN.  */
+      for (i = 1; i < HDR_LENGTH; i++)
+	{
+	  ch = mips_readchar (timeout);
+	  if (ch == SERIAL_TIMEOUT)
+            return -1;
+	  /* Make sure this is a header byte.  */
+	  if (ch == SYN || ! HDR_CHECK (ch))
+	    break;
+
+	  hdr[i] = ch;
+	}
+
+      /* If we got the complete header, we can return.  Otherwise we
+	 loop around and keep looking for SYN.  */
+      if (i >= HDR_LENGTH)
+        return 0;
+    }
+}
+
+/* Get a packet header, putting the data in the supplied buffer.
+   PGARBAGE is a pointer to the number of garbage characters received
+   so far.  The last character read is returned in *PCH.  Returns 0
+   for success, -1 for timeout, -2 for error.  */
+
+static int
+mips_receive_trailer (trlr, pgarbage, pch, timeout)
+     unsigned char *trlr;
+     int *pgarbage;
+     int *pch;
+     int timeout;
+{
+  int i;
+  int ch;
+
+  for (i = 0; i < TRLR_LENGTH; i++)
+    {
+      ch = mips_readchar (timeout);
+      *pch = ch;
+      if (ch == SERIAL_TIMEOUT)
+	return -1;
+      if (! TRLR_CHECK (ch))
+	return -2;
+      trlr[i] = ch;
+    }
+  return 0;
+}
+
+/* Get the checksum of a packet.  HDR points to the packet header.
+   DATA points to the packet data.  LEN is the length of DATA.  */
+
+static int
+mips_cksum (hdr, data, len)
+     const unsigned char *hdr;
+     const unsigned char *data;
+     int len;
+{
+  register const unsigned char *p;
+  register int c;
+  register int cksum;
+
+  cksum = 0;
+
+  /* The initial SYN is not included in the checksum.  */
+  c = HDR_LENGTH - 1;
+  p = hdr + 1;
+  while (c-- != 0)
+    cksum += *p++;
+  
+  c = len;
+  p = data;
+  while (c-- != 0)
+    cksum += *p++;
+
+  return cksum;
+}
+
+/* Send a packet containing the given ASCII string.  */
+
+static void
+mips_send_packet (s, get_ack)
+     const char *s;
+     int get_ack;
+{
+  /* unsigned */ int len;
+  unsigned char *packet;
+  register int cksum;
+  int try;
+
+  len = strlen (s);
+  if (len > DATA_MAXLEN)
+    mips_error ("MIPS protocol data packet too long: %s", s);
+
+  packet = (unsigned char *) alloca (HDR_LENGTH + len + TRLR_LENGTH + 1);
+
+  packet[HDR_INDX_SYN] = HDR_SET_SYN (1, len, mips_send_seq);
+  packet[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (1, len, mips_send_seq);
+  packet[HDR_INDX_LEN1] = HDR_SET_LEN1 (1, len, mips_send_seq);
+  packet[HDR_INDX_SEQ] = HDR_SET_SEQ (1, len, mips_send_seq);
+
+  memcpy (packet + HDR_LENGTH, s, len);
+
+  cksum = mips_cksum (packet, packet + HDR_LENGTH, len);
+  packet[HDR_LENGTH + len + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
+  packet[HDR_LENGTH + len + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
+  packet[HDR_LENGTH + len + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
+
+  /* Increment the sequence number.  This will set mips_send_seq to
+     the sequence number we expect in the acknowledgement.  */
+  mips_send_seq = (mips_send_seq + 1) % SEQ_MODULOS;
+
+  /* We can only have one outstanding data packet, so we just wait for
+     the acknowledgement here.  Keep retransmitting the packet until
+     we get one, or until we've tried too many times.  */
+  for (try = 0; try < mips_send_retries; try++)
+    {
+      int garbage;
+      int ch;
+
+      if (remote_debug > 0)
+	{
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  packet[HDR_LENGTH + len + TRLR_LENGTH] = '\0';
+	  printf_unfiltered ("Writing \"%s\"\n", packet + 1);
+	}
+
+      if (SERIAL_WRITE (mips_desc, packet,
+			HDR_LENGTH + len + TRLR_LENGTH) != 0)
+	mips_error ("write to target failed: %s", safe_strerror (errno));
+
+      if (! get_ack)
+	return;
+
+      garbage = 0;
+      ch = 0;
+      while (1)
+	{
+	  unsigned char hdr[HDR_LENGTH + 1];
+	  unsigned char trlr[TRLR_LENGTH + 1];
+	  int err;
+	  unsigned int seq;
+
+	  /* Get the packet header.  If we time out, resend the data
+	     packet.  */
+	  err = mips_receive_header (hdr, &garbage, ch, mips_retransmit_wait);
+	  if (err != 0)
+	    break;
+
+	  ch = 0;
+
+	  /* If we get a data packet, assume it is a duplicate and
+	     ignore it.  FIXME: If the acknowledgement is lost, this
+	     data packet may be the packet the remote sends after the
+	     acknowledgement.  */
+	  if (HDR_IS_DATA (hdr)) {
+            int i;
+
+            /* Ignore any errors raised whilst attempting to ignore
+               packet. */
+
+            len = HDR_GET_LEN (hdr);
+
+            for (i = 0; i < len; i++)
+              {
+                int rch;
+
+                rch = mips_readchar (2);
+                if (rch == SYN)
+                  {
+                    ch = SYN;
+                    break;
+                  }
+                if (rch == SERIAL_TIMEOUT)
+                  break;
+                /* ignore the character */
+              }
+
+            if (i == len)
+              (void) mips_receive_trailer (trlr, &garbage, &ch, 2);
+
+            /* We don't bother checking the checksum, or providing an
+               ACK to the packet. */
+	    continue;
+          }
+
+	  /* If the length is not 0, this is a garbled packet.  */
+	  if (HDR_GET_LEN (hdr) != 0)
+	    continue;
+
+	  /* Get the packet trailer.  */
+	  err = mips_receive_trailer (trlr, &garbage, &ch,
+				      mips_retransmit_wait);
+
+	  /* If we timed out, resend the data packet.  */
+	  if (err == -1)
+	    break;
+
+	  /* If we got a bad character, reread the header.  */
+	  if (err != 0)
+	    continue;
+
+	  /* If the checksum does not match the trailer checksum, this
+	     is a bad packet; ignore it.  */
+	  if (mips_cksum (hdr, (unsigned char *) NULL, 0)
+	      != TRLR_GET_CKSUM (trlr))
+	    continue;
+
+	  if (remote_debug > 0)
+	    {
+	      hdr[HDR_LENGTH] = '\0';
+	      trlr[TRLR_LENGTH] = '\0';
+	      /* Don't use _filtered; we can't deal with a QUIT out of
+		 target_wait, and I think this might be called from there.  */
+	      printf_unfiltered ("Got ack %d \"%s%s\"\n",
+			       HDR_GET_SEQ (hdr), hdr + 1, trlr);
+	    }
+
+	  /* If this ack is for the current packet, we're done.  */
+	  seq = HDR_GET_SEQ (hdr);
+	  if (seq == mips_send_seq)
+	    return;
+
+	  /* If this ack is for the last packet, resend the current
+	     packet.  */
+	  if ((seq + 1) % SEQ_MODULOS == mips_send_seq)
+	    break;
+
+	  /* Otherwise this is a bad ack; ignore it.  Increment the
+	     garbage count to ensure that we do not stay in this loop
+	     forever.  */
+	  ++garbage;
+	}
+    }
+
+  mips_error ("Remote did not acknowledge packet");
+}
+
+/* Receive and acknowledge a packet, returning the data in BUFF (which
+   should be DATA_MAXLEN + 1 bytes).  The protocol documentation
+   implies that only the sender retransmits packets, so this code just
+   waits silently for a packet.  It returns the length of the received
+   packet.  If THROW_ERROR is nonzero, call error() on errors.  If not,
+   don't print an error message and return -1.  */
+
+static int
+mips_receive_packet (buff, throw_error, timeout)
+     char *buff;
+     int throw_error;
+     int timeout;
+{
+  int ch;
+  int garbage;
+  int len;
+  unsigned char ack[HDR_LENGTH + TRLR_LENGTH + 1];
+  int cksum;
+
+  ch = 0;
+  garbage = 0;
+  while (1)
+    {
+      unsigned char hdr[HDR_LENGTH];
+      unsigned char trlr[TRLR_LENGTH];
+      int i;
+      int err;
+
+      if (mips_receive_header (hdr, &garbage, ch, timeout) != 0)
+	{
+	  if (throw_error)
+	    mips_error ("Timed out waiting for remote packet");
+	  else
+	    return -1;
+	}
+
+      ch = 0;
+
+      /* An acknowledgement is probably a duplicate; ignore it.  */
+      if (! HDR_IS_DATA (hdr))
+	{
+          len = HDR_GET_LEN (hdr);
+          /* Check if the length is valid for an ACK, we may aswell
+             try and read the remainder of the packet: */
+          if (len == 0)
+            {
+              /* Ignore the error condition, since we are going to
+                 ignore the packet anyway. */
+              (void) mips_receive_trailer (trlr, &garbage, &ch, timeout);
+            }
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  if (remote_debug > 0)
+	    printf_unfiltered ("Ignoring unexpected ACK\n");
+	  continue;
+	}
+
+      len = HDR_GET_LEN (hdr);
+      for (i = 0; i < len; i++)
+	{
+	  int rch;
+
+	  rch = mips_readchar (timeout);
+	  if (rch == SYN)
+	    {
+	      ch = SYN;
+	      break;
+	    }
+	  if (rch == SERIAL_TIMEOUT)
+	    {
+	      if (throw_error)
+		mips_error ("Timed out waiting for remote packet");
+	      else
+		return -1;
+	    }
+	  buff[i] = rch;
+	}
+
+      if (i < len)
+	{
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  if (remote_debug > 0)
+	    printf_unfiltered ("Got new SYN after %d chars (wanted %d)\n",
+			     i, len);
+	  continue;
+	}
+
+      err = mips_receive_trailer (trlr, &garbage, &ch, timeout);
+      if (err == -1)
+	{
+	  if (throw_error)
+	    mips_error ("Timed out waiting for packet");
+	  else
+	    return -1;
+	}
+      if (err == -2)
+	{
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  if (remote_debug > 0)
+	    printf_unfiltered ("Got SYN when wanted trailer\n");
+	  continue;
+	}
+
+      /* If this is the wrong sequence number, ignore it.  */
+      if (HDR_GET_SEQ (hdr) != mips_receive_seq)
+	{
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  if (remote_debug > 0)
+	    printf_unfiltered ("Ignoring sequence number %d (want %d)\n",
+			     HDR_GET_SEQ (hdr), mips_receive_seq);
+	  continue;
+	}
+
+      if (mips_cksum (hdr, buff, len) == TRLR_GET_CKSUM (trlr))
+        break;
+
+      if (remote_debug > 0)
+	/* Don't use _filtered; we can't deal with a QUIT out of
+	   target_wait, and I think this might be called from there.  */
+	printf_unfiltered ("Bad checksum; data %d, trailer %d\n",
+			 mips_cksum (hdr, buff, len),
+			 TRLR_GET_CKSUM (trlr));
+
+      /* The checksum failed.  Send an acknowledgement for the
+	 previous packet to tell the remote to resend the packet.  */
+      ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq);
+      ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq);
+      ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq);
+      ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq);
+
+      cksum = mips_cksum (ack, (unsigned char *) NULL, 0);
+
+      ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
+      ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
+      ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
+
+      if (remote_debug > 0)
+	{
+	  ack[HDR_LENGTH + TRLR_LENGTH] = '\0';
+	  /* Don't use _filtered; we can't deal with a QUIT out of
+	     target_wait, and I think this might be called from there.  */
+	  printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq,
+			   ack + 1);
+	}
+
+      if (SERIAL_WRITE (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0)
+	{
+	  if (throw_error)
+	    mips_error ("write to target failed: %s", safe_strerror (errno));
+	  else
+	    return -1;
+	}
+    }
+
+  if (remote_debug > 0)
+    {
+      buff[len] = '\0';
+      /* Don't use _filtered; we can't deal with a QUIT out of
+	 target_wait, and I think this might be called from there.  */
+      printf_unfiltered ("Got packet \"%s\"\n", buff);
+    }
+
+  /* We got the packet.  Send an acknowledgement.  */
+  mips_receive_seq = (mips_receive_seq + 1) % SEQ_MODULOS;
+
+  ack[HDR_INDX_SYN] = HDR_SET_SYN (0, 0, mips_receive_seq);
+  ack[HDR_INDX_TYPE_LEN] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq);
+  ack[HDR_INDX_LEN1] = HDR_SET_LEN1 (0, 0, mips_receive_seq);
+  ack[HDR_INDX_SEQ] = HDR_SET_SEQ (0, 0, mips_receive_seq);
+
+  cksum = mips_cksum (ack, (unsigned char *) NULL, 0);
+
+  ack[HDR_LENGTH + TRLR_INDX_CSUM1] = TRLR_SET_CSUM1 (cksum);
+  ack[HDR_LENGTH + TRLR_INDX_CSUM2] = TRLR_SET_CSUM2 (cksum);
+  ack[HDR_LENGTH + TRLR_INDX_CSUM3] = TRLR_SET_CSUM3 (cksum);
+
+  if (remote_debug > 0)
+    {
+      ack[HDR_LENGTH + TRLR_LENGTH] = '\0';
+      /* Don't use _filtered; we can't deal with a QUIT out of
+	 target_wait, and I think this might be called from there.  */
+      printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq,
+		       ack + 1);
+    }
+
+  if (SERIAL_WRITE (mips_desc, ack, HDR_LENGTH + TRLR_LENGTH) != 0)
+    {
+      if (throw_error)
+	mips_error ("write to target failed: %s", safe_strerror (errno));
+      else
+	return -1;
+    }
+
+  return len;
+}
+
+/* Optionally send a request to the remote system and optionally wait
+   for the reply.  This implements the remote debugging protocol,
+   which is built on top of the packet protocol defined above.  Each
+   request has an ADDR argument and a DATA argument.  The following
+   requests are defined:
+
+   \0	don't send a request; just wait for a reply
+   i	read word from instruction space at ADDR
+   d	read word from data space at ADDR
+   I	write DATA to instruction space at ADDR
+   D	write DATA to data space at ADDR
+   r	read register number ADDR
+   R	set register number ADDR to value DATA
+   c	continue execution (if ADDR != 1, set pc to ADDR)
+   s	single step (if ADDR != 1, set pc to ADDR)
+
+   The read requests return the value requested.  The write requests
+   return the previous value in the changed location.  The execution
+   requests return a UNIX wait value (the approximate signal which
+   caused execution to stop is in the upper eight bits).
+
+   If PERR is not NULL, this function waits for a reply.  If an error
+   occurs, it sets *PERR to 1 and sets errno according to what the
+   target board reports.  */
+
+static CORE_ADDR 
+mips_request (cmd, addr, data, perr, timeout, buff)
+     int cmd;
+     CORE_ADDR addr;
+     CORE_ADDR data;
+     int *perr;
+     int timeout;
+     char *buff;
+{
+  char myBuff[DATA_MAXLEN + 1];
+  int len;
+  int rpid;
+  char rcmd;
+  int rerrflg;
+  unsigned long rresponse;
+
+  if (buff == (char *) NULL)
+    buff = myBuff;
+
+  if (cmd != '\0')
+    {
+      if (mips_need_reply)
+	fatal ("mips_request: Trying to send command before reply");
+      sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, paddr_nz (addr), paddr_nz (data));
+      mips_send_packet (buff, 1);
+      mips_need_reply = 1;
+    }
+
+  if (perr == (int *) NULL)
+    return 0;
+
+  if (! mips_need_reply)
+    fatal ("mips_request: Trying to get reply before command");
+
+  mips_need_reply = 0;
+
+  len = mips_receive_packet (buff, 1, timeout);
+  buff[len] = '\0';
+
+  if (sscanf (buff, "0x%x %c 0x%x 0x%lx",
+	      &rpid, &rcmd, &rerrflg, &rresponse) != 4
+      || (cmd != '\0' && rcmd != cmd))
+    mips_error ("Bad response from remote board");
+
+  if (rerrflg != 0)
+    {
+      *perr = 1;
+
+      /* FIXME: This will returns MIPS errno numbers, which may or may
+	 not be the same as errno values used on other systems.  If
+	 they stick to common errno values, they will be the same, but
+	 if they don't, they must be translated.  */
+      errno = rresponse;
+
+      return 0;
+    }
+
+  *perr = 0;
+  return rresponse;
+}
+
+static void
+mips_initialize_cleanups (arg)
+     PTR arg;
+{
+  mips_initializing = 0;
+}
+
+static void
+mips_exit_cleanups (arg)
+     PTR arg;
+{
+  mips_exiting = 0;
+}
+
+static void
+mips_send_command (cmd, prompt)
+     const char *cmd;
+     int prompt;
+{
+  SERIAL_WRITE (mips_desc, cmd, strlen(cmd));
+  mips_expect (cmd);
+  mips_expect ("\n");
+  if (prompt)
+    mips_expect (mips_monitor_prompt);
+}
+
+/* Enter remote (dbx) debug mode: */
+static void
+mips_enter_debug ()
+{
+  /* Reset the sequence numbers, ready for the new debug sequence: */
+  mips_send_seq = 0;
+  mips_receive_seq = 0;
+
+  if (mips_monitor != MON_IDT)
+    mips_send_command ("debug\r", 0);
+  else /* assume IDT monitor by default */
+    mips_send_command ("db tty0\r", 0);
+
+  sleep(1);
+  SERIAL_WRITE (mips_desc, "\r", sizeof "\r" - 1);
+
+  /* We don't need to absorb any spurious characters here, since the
+     mips_receive_header will eat up a reasonable number of characters
+     whilst looking for the SYN, however this avoids the "garbage"
+     being displayed to the user. */
+  if (mips_monitor != MON_IDT)
+    mips_expect ("\r");
+  
+  {
+    char buff[DATA_MAXLEN + 1];
+    if (mips_receive_packet (buff, 1, 3) < 0)
+      mips_error ("Failed to initialize (didn't receive packet).");
+  }
+}
+
+/* Exit remote (dbx) debug mode, returning to the monitor prompt: */
+static int
+mips_exit_debug ()
+{
+  int err;
+  struct cleanup *old_cleanups = make_cleanup (mips_exit_cleanups, NULL);
+
+  mips_exiting = 1;
+
+  if (mips_monitor != MON_IDT)
+    {
+      /* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately,
+         so we do not get a reply to this command: */
+      mips_request ('x', (unsigned int) 0, (unsigned int) 0, NULL,
+		mips_receive_wait, NULL);
+      mips_need_reply = 0;
+      if (!mips_expect (" break!"))
+        return -1;
+    }
+  else
+    mips_request ('x', (unsigned int) 0, (unsigned int) 0, &err,
+                  mips_receive_wait, NULL);
+
+  if (!mips_expect (mips_monitor_prompt))
+    return -1;
+
+  do_cleanups (old_cleanups);
+
+  return 0;
+}
+
+/* Initialize a new connection to the MIPS board, and make sure we are
+   really connected.  */
+
+static void
+mips_initialize ()
+{
+  int err;
+  struct cleanup *old_cleanups = make_cleanup (mips_initialize_cleanups, NULL);
+  int j;
+
+  /* What is this code doing here?  I don't see any way it can happen, and
+     it might mean mips_initializing didn't get cleared properly.
+     So I'll make it a warning.  */
+
+  if (mips_initializing)
+    {
+      warning ("internal error: mips_initialize called twice");
+      return;
+    }
+
+  mips_wait_flag = 0;
+  mips_initializing = 1;
+
+  /* At this point, the packit protocol isn't responding.  We'll try getting
+     into the monitor, and restarting the protocol.  */
+
+  /* Force the system into the monitor.  After this we *should* be at
+     the mips_monitor_prompt.  */
+  if (mips_monitor != MON_IDT)
+    j = 0; /* start by checking if we are already at the prompt */
+  else
+    j = 1; /* start by sending a break */
+  for (; j <= 4; j++)
+    {
+      switch (j)
+	{
+        case 0:                 /* First, try sending a CR */
+          SERIAL_FLUSH_INPUT (mips_desc);
+	  SERIAL_WRITE (mips_desc, "\r", 1);
+          break;
+	case 1:			/* First, try sending a break */
+	  SERIAL_SEND_BREAK (mips_desc);
+	  break;
+	case 2:			/* Then, try a ^C */
+	  SERIAL_WRITE (mips_desc, "\003", 1);
+	  break;
+	case 3:			/* Then, try escaping from download */
+	  {
+            if (mips_monitor != MON_IDT)
+              {
+                char tbuff[7];
+
+                /* We shouldn't need to send multiple termination
+                   sequences, since the target performs line (or
+                   block) reads, and then processes those
+                   packets. In-case we were downloading a large packet
+                   we flush the output buffer before inserting a
+                   termination sequence. */
+                SERIAL_FLUSH_OUTPUT (mips_desc);
+                sprintf (tbuff, "\r/E/E\r");
+                SERIAL_WRITE (mips_desc, tbuff, 6);
+              }
+            else
+              {
+                char srec[10];
+                int i;
+
+                /* We are possibly in binary download mode, having
+                   aborted in the middle of an S-record.  ^C won't
+                   work because of binary mode.  The only reliable way
+                   out is to send enough termination packets (8 bytes)
+                   to fill up and then overflow the largest size
+                   S-record (255 bytes in this case).  This amounts to
+                   256/8 + 1 packets.
+                   */
+
+                mips_make_srec (srec, '7', 0, NULL, 0);
+
+                for (i = 1; i <= 33; i++)
+                  {
+                    SERIAL_WRITE (mips_desc, srec, 8);
+
+                    if (SERIAL_READCHAR (mips_desc, 0) >= 0)
+                      break;	/* Break immediatly if we get something from
+				   the board. */
+                  }
+              }
+          }
+	  break;
+	case 4:
+	  mips_error ("Failed to initialize.");
+	}
+
+      if (mips_expect (mips_monitor_prompt))
+	break;
+    }
+
+  if (mips_monitor != MON_IDT)
+    {
+      /* Sometimes PMON ignores the first few characters in the first
+         command sent after a load.  Sending a blank command gets
+	 around that.  */
+      mips_send_command ("\r", -1);
+
+      /* Ensure the correct target state: */
+      if (mips_monitor != MON_LSI)
+	mips_send_command ("set regsize 64\r", -1);
+      mips_send_command ("set hostport tty0\r", -1);
+      mips_send_command ("set brkcmd \"\"\r", -1);
+      /* Delete all the current breakpoints: */
+      mips_send_command ("db *\r", -1);
+      /* NOTE: PMON does not have breakpoint support through the
+         "debug" mode, only at the monitor command-line. */
+    }
+
+  mips_enter_debug ();
+
+  /* Clear all breakpoints: */
+  if ((mips_monitor == MON_IDT
+       && clear_breakpoint (-1, 0, BREAK_UNUSED) == 0)
+      || mips_monitor == MON_LSI)
+    monitor_supports_breakpoints = 1;
+  else
+    monitor_supports_breakpoints = 0;
+
+  do_cleanups (old_cleanups);
+
+  /* If this doesn't call error, we have connected; we don't care if
+     the request itself succeeds or fails.  */
+
+  mips_request ('r', (unsigned int) 0, (unsigned int) 0, &err,
+		mips_receive_wait, NULL);
+  set_current_frame (create_new_frame (read_fp (), read_pc ()));
+  select_frame (get_current_frame (), 0);
+}
+
+/* Open a connection to the remote board.  */
+static void
+common_open (ops, name, from_tty, new_monitor, new_monitor_prompt)
+     struct target_ops *ops;
+     char *name;
+     int from_tty;
+     enum mips_monitor_type new_monitor;
+     char *new_monitor_prompt;
+{
+  char *ptype;
+  char *serial_port_name;
+  char *remote_name = 0;
+  char *local_name = 0;
+  char **argv;
+
+  if (name == 0)
+    error (
+"To open a MIPS remote debugging connection, you need to specify what serial\n\
+device is attached to the target board (e.g., /dev/ttya).\n"
+"If you want to use TFTP to download to the board, specify the name of a\n"
+"temporary file to be used by GDB for downloads as the second argument.\n"
+"This filename must be in the form host:filename, where host is the name\n"
+"of the host running the TFTP server, and the file must be readable by the\n"
+"world.  If the local name of the temporary file differs from the name as\n"
+"seen from the board via TFTP, specify that name as the third parameter.\n");
+
+  /* Parse the serial port name, the optional TFTP name, and the
+     optional local TFTP name.  */
+  if ((argv = buildargv (name)) == NULL)
+    nomem(0);
+  make_cleanup ((make_cleanup_func) freeargv, argv);
+
+  serial_port_name = strsave (argv[0]);
+  if (argv[1])				/* remote TFTP name specified? */
+    {
+      remote_name = argv[1];
+      if (argv[2])			/* local TFTP filename specified? */
+	local_name = argv[2];
+    }
+
+  target_preopen (from_tty);
+
+  if (mips_is_open)
+    unpush_target (current_ops);
+
+  /* Open and initialize the serial port.  */
+  mips_desc = SERIAL_OPEN (serial_port_name);
+  if (mips_desc == (serial_t) NULL)
+    perror_with_name (serial_port_name);
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (mips_desc, baud_rate))
+        {
+          SERIAL_CLOSE (mips_desc);
+          perror_with_name (serial_port_name);
+        }
+    }
+
+  SERIAL_RAW (mips_desc);
+
+  /* Open and initialize the optional download port.  If it is in the form
+     hostname#portnumber, it's a UDP socket.  If it is in the form
+     hostname:filename, assume it's the TFTP filename that must be
+     passed to the DDB board to tell it where to get the load file.  */
+  if (remote_name)
+    {
+      if (strchr (remote_name, '#'))
+	{
+	  udp_desc = SERIAL_OPEN (remote_name);
+	  if (!udp_desc)
+	    perror_with_name ("Unable to open UDP port");
+	  udp_in_use = 1;
+	}
+      else
+	{
+	  /* Save the remote and local names of the TFTP temp file.  If
+	     the user didn't specify a local name, assume it's the same
+	     as the part of the remote name after the "host:".  */
+	  if (tftp_name)
+	    free (tftp_name);
+	  if (tftp_localname)
+	    free (tftp_localname);
+	  if (local_name == NULL)
+	      if ((local_name = strchr (remote_name, ':')) != NULL)
+		local_name++;		/* skip over the colon */
+	  if (local_name == NULL)
+	    local_name = remote_name;	/* local name same as remote name */
+	  tftp_name = strsave (remote_name);
+	  tftp_localname = strsave (local_name);
+	  tftp_in_use = 1;
+	}
+    }
+
+  current_ops = ops;
+  mips_is_open = 1;
+
+  /* Reset the expected monitor prompt if it's never been set before.  */
+  if (mips_monitor_prompt == NULL)
+    mips_monitor_prompt = strsave (new_monitor_prompt);
+  mips_monitor = new_monitor;
+
+  mips_initialize ();
+
+  if (from_tty)
+    printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name);
+
+  /* Switch to using remote target now.  */
+  push_target (ops);
+
+  /* FIXME: Should we call start_remote here?  */
+
+  /* Try to figure out the processor model if possible.  */
+  ptype = mips_read_processor_type ();
+  if (ptype)
+    mips_set_processor_type_command (strsave (ptype), 0);
+
+/* This is really the job of start_remote however, that makes an assumption
+   that the target is about to print out a status message of some sort.  That
+   doesn't happen here (in fact, it may not be possible to get the monitor to
+   send the appropriate packet).  */
+
+  flush_cached_frames ();
+  registers_changed ();
+  stop_pc = read_pc ();
+  set_current_frame (create_new_frame (read_fp (), stop_pc));
+  select_frame (get_current_frame (), 0);
+  print_stack_frame (selected_frame, -1, 1);
+  free (serial_port_name);
+}
+
+static void
+mips_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  common_open (&mips_ops, name, from_tty, MON_IDT, TARGET_MONITOR_PROMPT);
+}
+
+static void
+pmon_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  common_open (&pmon_ops, name, from_tty, MON_PMON, "PMON> ");
+}
+
+static void
+ddb_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  common_open (&ddb_ops, name, from_tty, MON_DDB, "NEC010>");
+}
+
+static void
+lsi_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  int i;
+
+  /* Clear the LSI breakpoint table.  */
+  for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
+    lsi_breakpoints[i].type = BREAK_UNUSED;
+  
+  common_open (&lsi_ops, name, from_tty, MON_LSI, "PMON> ");
+}
+
+/* Close a connection to the remote board.  */
+
+static void
+mips_close (quitting)
+     int quitting;
+{
+  if (mips_is_open)
+    {
+      /* Get the board out of remote debugging mode.  */
+      (void) mips_exit_debug ();
+
+      close_ports ();
+    }
+}
+
+/* Detach from the remote board.  */
+
+static void
+mips_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    error ("Argument given to \"detach\" when remotely debugging.");
+
+  pop_target ();
+
+  mips_close (1);
+
+  if (from_tty)
+    printf_unfiltered ("Ending remote MIPS debugging.\n");
+}
+
+/* Tell the target board to resume.  This does not wait for a reply
+   from the board, except in the case of single-stepping on LSI boards,
+   where PMON does return a reply.  */
+
+static void
+mips_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  int err;
+
+  /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after
+     a single step, so we wait for that.  */
+  mips_request (step ? 's' : 'c',
+		(unsigned int) 1,
+		(unsigned int) siggnal,
+		mips_monitor == MON_LSI && step ? &err : (int *) NULL,
+		mips_receive_wait, NULL);
+}
+
+/* Return the signal corresponding to SIG, where SIG is the number which
+   the MIPS protocol uses for the signal.  */
+enum target_signal
+mips_signal_from_protocol (sig)
+     int sig;
+{
+  /* We allow a few more signals than the IDT board actually returns, on
+     the theory that there is at least *some* hope that perhaps the numbering
+     for these signals is widely agreed upon.  */
+  if (sig <= 0
+      || sig > 31)
+    return TARGET_SIGNAL_UNKNOWN;
+
+  /* Don't want to use target_signal_from_host because we are converting
+     from MIPS signal numbers, not host ones.  Our internal numbers
+     match the MIPS numbers for the signals the board can return, which
+     are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP.  */
+  return (enum target_signal) sig;
+}
+
+/* Wait until the remote stops, and return a wait status.  */
+
+static int
+mips_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int rstatus;
+  int err;
+  char buff[DATA_MAXLEN];
+  int rpc, rfp, rsp;
+  char flags[20];
+  int nfields;
+  int i;
+
+  interrupt_count = 0;
+  hit_watchpoint = 0;
+
+  /* If we have not sent a single step or continue command, then the
+     board is waiting for us to do something.  Return a status
+     indicating that it is stopped.  */
+  if (! mips_need_reply)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      return 0;
+    }
+
+  /* No timeout; we sit here as long as the program continues to execute.  */
+  mips_wait_flag = 1;
+  rstatus = mips_request ('\000', (unsigned int) 0, (unsigned int) 0, &err, -1,
+			  buff);
+  mips_wait_flag = 0;
+  if (err)
+    mips_error ("Remote failure: %s", safe_strerror (errno));
+
+  /* On returning from a continue, the PMON monitor seems to start
+     echoing back the messages we send prior to sending back the
+     ACK. The code can cope with this, but to try and avoid the
+     unnecessary serial traffic, and "spurious" characters displayed
+     to the user, we cheat and reset the debug protocol. The problems
+     seems to be caused by a check on the number of arguments, and the
+     command length, within the monitor causing it to echo the command
+     as a bad packet. */
+  if (mips_monitor == MON_PMON)
+    {
+      mips_exit_debug ();
+      mips_enter_debug ();
+    }
+
+  /* See if we got back extended status.  If so, pick out the pc, fp, sp, etc... */
+
+  nfields = sscanf (buff, "0x%*x %*c 0x%*x 0x%*x 0x%x 0x%x 0x%x 0x%*x %s",
+		    &rpc, &rfp, &rsp, flags);
+  if (nfields >= 3)
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+
+      store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rpc);
+      supply_register (PC_REGNUM, buf);
+
+      store_unsigned_integer (buf, REGISTER_RAW_SIZE (PC_REGNUM), rfp);
+      supply_register (30, buf); /* This register they are avoiding and so it is unnamed */
+
+      store_unsigned_integer (buf, REGISTER_RAW_SIZE (SP_REGNUM), rsp);
+      supply_register (SP_REGNUM, buf);
+
+      store_unsigned_integer (buf, REGISTER_RAW_SIZE (FP_REGNUM), 0);
+      supply_register (FP_REGNUM, buf);
+
+      if (nfields == 9)
+	{
+	  int i;
+
+	  for (i = 0; i <= 2; i++)
+	    if (flags[i] == 'r' || flags[i] == 'w')
+	      hit_watchpoint = 1;
+	    else if (flags[i] == '\000')
+	      break;
+	}
+    }
+
+  if (strcmp (target_shortname, "lsi") == 0)
+    {
+#if 0
+      /* If this is an LSI PMON target, see if we just hit a hardrdware watchpoint.
+	 Right now, PMON doesn't give us enough information to determine which
+	 breakpoint we hit.  So we have to look up the PC in our own table
+	 of breakpoints, and if found, assume it's just a normal instruction
+	 fetch breakpoint, not a data watchpoint.  FIXME when PMON
+	 provides some way to tell us what type of breakpoint it is.  */
+      int i;
+      CORE_ADDR pc = read_pc();
+
+      hit_watchpoint = 1;
+      for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
+	{
+	  if (lsi_breakpoints[i].addr == pc
+	      && lsi_breakpoints[i].type == BREAK_FETCH)
+	    {
+	      hit_watchpoint = 0;
+	      break;
+	    }
+	}
+#else
+      /* If a data breakpoint was hit, PMON returns the following packet:
+	     0x1 c 0x0 0x57f 0x1
+	 The return packet from an ordinary breakpoint doesn't have the
+	 extra 0x01 field tacked onto the end.  */
+      if (nfields == 1 && rpc == 1)
+	hit_watchpoint = 1;
+#endif
+    }
+
+  /* NOTE: The following (sig) numbers are defined by PMON:
+     	SPP_SIGTRAP     5       breakpoint
+        SPP_SIGINT      2
+        SPP_SIGSEGV     11
+        SPP_SIGBUS      10
+        SPP_SIGILL      4
+        SPP_SIGFPE      8
+        SPP_SIGTERM     15 */
+
+  /* Translate a MIPS waitstatus.  We use constants here rather than WTERMSIG
+     and so on, because the constants we want here are determined by the
+     MIPS protocol and have nothing to do with what host we are running on.  */
+  if ((rstatus & 0xff) == 0)
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = (((rstatus) >> 8) & 0xff);
+    }
+  else if ((rstatus & 0xff) == 0x7f)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = mips_signal_from_protocol (((rstatus) >> 8) & 0xff);
+
+      /* If the stop PC is in the _exit function, assume
+         we hit the 'break 0x3ff' instruction in _exit, so this
+	 is not a normal breakpoint.  */
+      if (strcmp (target_shortname, "lsi") == 0)
+	{
+	  char *func_name;
+	  CORE_ADDR func_start;
+	  CORE_ADDR pc = read_pc();
+
+	  find_pc_partial_function (pc, &func_name, &func_start, NULL);
+	  if (func_name != NULL && strcmp (func_name, "_exit") == 0
+	      && func_start == pc)
+	    status->kind = TARGET_WAITKIND_EXITED;
+	}
+    }
+  else
+    {
+      status->kind = TARGET_WAITKIND_SIGNALLED;
+      status->value.sig = mips_signal_from_protocol (rstatus & 0x7f);
+    }
+
+  return 0;
+}
+
+/* We have to map between the register numbers used by gdb and the
+   register numbers used by the debugging protocol.  This function
+   assumes that we are using tm-mips.h.  */
+
+#define REGNO_OFFSET 96
+
+static int
+mips_map_regno (regno)
+     int regno;
+{
+  if (regno < 32)
+    return regno;
+  if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
+    return regno - FP0_REGNUM + 32;
+  switch (regno)
+    {
+    case PC_REGNUM:
+      return REGNO_OFFSET + 0;
+    case CAUSE_REGNUM:
+      return REGNO_OFFSET + 1;
+    case HI_REGNUM:
+      return REGNO_OFFSET + 2;
+    case LO_REGNUM:
+      return REGNO_OFFSET + 3;
+    case FCRCS_REGNUM:
+      return REGNO_OFFSET + 4;
+    case FCRIR_REGNUM:
+      return REGNO_OFFSET + 5;
+    default:
+      /* FIXME: Is there a way to get the status register?  */
+      return 0;
+    }
+}
+
+/* Fetch the remote registers.  */
+
+static void
+mips_fetch_registers (regno)
+     int regno;
+{
+  unsigned LONGEST val;
+  int err;
+
+  if (regno == -1)
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	mips_fetch_registers (regno);
+      return;
+    }
+
+  if (regno == FP_REGNUM || regno == ZERO_REGNUM)
+    /* FP_REGNUM on the mips is a hack which is just supposed to read
+       zero (see also mips-nat.c).  */
+    val = 0;
+  else
+    {
+      /* If PMON doesn't support this register, don't waste serial
+         bandwidth trying to read it.  */
+      int pmon_reg = mips_map_regno (regno);
+      if (regno != 0 && pmon_reg == 0)
+	val = 0;
+      else
+	{
+	  /* Unfortunately the PMON version in the Vr4300 board has been
+	     compiled without the 64bit register access commands. This
+	     means we cannot get hold of the full register width. */
+	  if (mips_monitor == MON_DDB)
+	    val = (unsigned)mips_request ('t', (unsigned int) pmon_reg,
+				(unsigned int) 0, &err, mips_receive_wait, NULL);
+	  else
+	    val = mips_request ('r', (unsigned int) pmon_reg,
+				(unsigned int) 0, &err, mips_receive_wait, NULL);
+	  if (err)
+	    mips_error ("Can't read register %d: %s", regno,
+			safe_strerror (errno));
+	}
+    }
+
+  {
+    char buf[MAX_REGISTER_RAW_SIZE];
+
+    /* We got the number the register holds, but gdb expects to see a
+       value in the target byte ordering.  */
+    store_unsigned_integer (buf, REGISTER_RAW_SIZE (regno), val);
+    supply_register (regno, buf);
+  }
+}
+
+/* Prepare to store registers.  The MIPS protocol can store individual
+   registers, so this function doesn't have to do anything.  */
+
+static void
+mips_prepare_to_store ()
+{
+}
+
+/* Store remote register(s).  */
+
+static void
+mips_store_registers (regno)
+     int regno;
+{
+  int err;
+
+  if (regno == -1)
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	mips_store_registers (regno);
+      return;
+    }
+
+  mips_request ('R', (unsigned int) mips_map_regno (regno),
+		read_register (regno),
+		&err, mips_receive_wait, NULL);
+  if (err)
+    mips_error ("Can't write register %d: %s", regno, safe_strerror (errno));
+}
+
+/* Fetch a word from the target board.  */
+
+static unsigned int 
+mips_fetch_word (addr)
+     CORE_ADDR addr;
+{
+  unsigned int val;
+  int err;
+
+  /* FIXME! addr was cast to uint! */
+  val = mips_request ('d', addr, (unsigned int) 0, &err,
+		      mips_receive_wait, NULL);
+  if (err)
+    {
+      /* Data space failed; try instruction space.  */
+      /* FIXME! addr was cast to uint! */
+      val = mips_request ('i', addr, (unsigned int) 0, &err,
+			  mips_receive_wait, NULL);
+      if (err)
+        mips_error ("Can't read address 0x%s: %s",
+	      paddr_nz (addr), safe_strerror (errno));
+    }
+  return val;
+}
+
+/* Store a word to the target board.  Returns errno code or zero for
+   success.  If OLD_CONTENTS is non-NULL, put the old contents of that
+   memory location there.  */
+
+/* FIXME! make sure only 32-bit quantities get stored! */
+static int
+mips_store_word (addr, val, old_contents)
+     CORE_ADDR addr;
+     unsigned int val;
+     char *old_contents;
+{
+  int err;
+  unsigned int oldcontents;
+
+  oldcontents = mips_request ('D', addr, (unsigned int) val,
+			      &err,
+			      mips_receive_wait, NULL);
+  if (err)
+    {
+      /* Data space failed; try instruction space.  */
+      oldcontents = mips_request ('I', addr,
+				  (unsigned int) val, &err,
+				  mips_receive_wait, NULL);
+      if (err)
+	return errno;
+    }
+  if (old_contents != NULL)
+    store_unsigned_integer (old_contents, 4, oldcontents);
+  return 0;
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR,
+   transferring to or from debugger address MYADDR.  Write to inferior
+   if SHOULD_WRITE is nonzero.  Returns length of data written or
+   read; 0 for error.  Note that protocol gives us the correct value
+   for a longword, since it transfers values in ASCII.  We want the
+   byte values, so we have to swap the longword values.  */
+
+static int
+mips_xfer_memory (memaddr, myaddr, len, write, ignore)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *ignore;
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr &~ 3;
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count = (((memaddr + len) - addr) + 3) / 4;
+  /* Allocate buffer of that many longwords.  */
+  register char *buffer = alloca (count * 4);
+
+  int status;
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing data.  */
+      if (addr != memaddr || len < 4)
+	{
+	  /* Need part of initial word -- fetch it.  */
+	  store_unsigned_integer (&buffer[0], 4, mips_fetch_word (addr));
+	}
+
+      if (count > 1)
+	{
+	  /* Need part of last word -- fetch it.  FIXME: we do this even
+	     if we don't need it.  */
+	  store_unsigned_integer (&buffer[(count - 1) * 4], 4,
+				  mips_fetch_word (addr + (count - 1) * 4));
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & 3), myaddr, len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += 4)
+	{
+	  status = mips_store_word (addr,
+				    extract_unsigned_integer (&buffer[i*4], 4),
+				    NULL);
+	  /* Report each kilobyte (we download 32-bit words at a time) */
+	  if (i % 256 == 255) 
+	    {
+	      printf_unfiltered ("*");
+	      gdb_flush (gdb_stdout);
+	    }
+	  if (status)
+	    {
+	      errno = status;
+	      return 0;
+	    }
+	  /* FIXME: Do we want a QUIT here?  */
+	}
+      if (count >= 256)
+	printf_unfiltered ("\n");
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += 4)
+	{
+	  store_unsigned_integer (&buffer[i*4], 4, mips_fetch_word (addr));
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr, buffer + (memaddr & 3), len);
+    }
+  return len;
+}
+
+/* Print info on this target.  */
+
+static void
+mips_files_info (ignore)
+     struct target_ops *ignore;
+{
+  printf_unfiltered ("Debugging a MIPS board over a serial line.\n");
+}
+
+/* Kill the process running on the board.  This will actually only
+   work if we are doing remote debugging over the console input.  I
+   think that if IDT/sim had the remote debug interrupt enabled on the
+   right port, we could interrupt the process with a break signal.  */
+
+static void
+mips_kill ()
+{
+  if (!mips_wait_flag)
+    return;
+
+  interrupt_count++;
+
+  if (interrupt_count >= 2)
+    {
+      interrupt_count = 0;
+
+      target_terminal_ours ();
+
+      if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+	{
+	  /* Clean up in such a way that mips_close won't try to talk to the
+	     board (it almost surely won't work since we weren't able to talk to
+	     it).  */
+	  mips_wait_flag = 0;
+	  close_ports();
+
+	  printf_unfiltered ("Ending remote MIPS debugging.\n");
+	  target_mourn_inferior ();
+
+	  return_to_top_level (RETURN_QUIT);
+	}
+
+      target_terminal_inferior ();
+    }
+
+  if (remote_debug > 0)
+    printf_unfiltered ("Sending break\n");
+
+  SERIAL_SEND_BREAK (mips_desc);
+
+#if 0
+  if (mips_is_open)
+    {
+      char cc;
+
+      /* Send a ^C.  */
+      cc = '\003';
+      SERIAL_WRITE (mips_desc, &cc, 1);
+      sleep (1);
+      target_mourn_inferior ();
+    }
+#endif
+}
+
+/* Start running on the target board.  */
+
+static void
+mips_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  CORE_ADDR entry_pt;
+
+  if (args && *args)
+    {
+      warning ("\
+Can't pass arguments to remote MIPS board; arguments ignored.");
+      /* And don't try to use them on the next "run" command.  */
+      execute_command ("set args", 0);
+    }
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (CORE_ADDR) bfd_get_start_address (exec_bfd);
+
+  init_wait_for_inferior ();
+
+  /* FIXME: Should we set inferior_pid here?  */
+
+  proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Clean up after a process.  Actually nothing to do.  */
+
+static void
+mips_mourn_inferior ()
+{
+  if (current_ops != NULL)
+    unpush_target (current_ops);
+  generic_mourn_inferior ();
+}
+
+/* We can write a breakpoint and read the shadow contents in one
+   operation.  */
+
+/* Insert a breakpoint.  On targets that don't have built-in breakpoint
+   support, we read the contents of the target location and stash it,
+   then overwrite it with a breakpoint instruction.  ADDR is the target
+   location in the target machine.  CONTENTS_CACHE is a pointer to 
+   memory allocated for saving the target contents.  It is guaranteed
+   by the caller to be long enough to save sizeof BREAKPOINT bytes (this
+   is accomplished via BREAKPOINT_MAX).  */
+
+static int
+mips_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  if (monitor_supports_breakpoints)
+    return set_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH);
+  else
+    return memory_insert_breakpoint (addr, contents_cache);
+}
+
+static int
+mips_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  if (monitor_supports_breakpoints)
+    return clear_breakpoint (addr, MIPS_INSTLEN, BREAK_FETCH);
+  else
+    return memory_remove_breakpoint (addr, contents_cache);
+}
+
+#if 0 /* currently not used */
+/* PMON does not currently provide support for the debug mode 'b'
+   commands to manipulate breakpoints. However, if we wanted to use
+   the monitor breakpoints (rather than the GDB BREAK_INSN version)
+   then this code performs the work needed to leave debug mode,
+   set/clear the breakpoint, and then return to debug mode. */
+
+#define PMON_MAX_BP (33) /* 32 SW, 1 HW */
+static CORE_ADDR mips_pmon_bp_info[PMON_MAX_BP];
+/* NOTE: The code relies on this vector being zero-initialised by the system */
+
+static int
+pmon_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int status;
+
+  if (monitor_supports_breakpoints)
+    {
+      char tbuff[12]; /* space for breakpoint command */
+      int bpnum;
+      CORE_ADDR bpaddr;
+
+      /* PMON does not support debug level breakpoint set/remove: */
+      if (mips_exit_debug ())
+        mips_error ("Failed to exit debug mode");
+
+      sprintf (tbuff, "b %08x\r", addr);
+      mips_send_command (tbuff, 0);
+
+      mips_expect ("Bpt ");
+
+      if (!mips_getstring (tbuff, 2))
+        return 1;
+      tbuff[2] = '\0'; /* terminate the string */
+      if (sscanf (tbuff, "%d", &bpnum) != 1)
+        {
+          fprintf_unfiltered (gdb_stderr,
+			      "Invalid decimal breakpoint number from target: %s\n", tbuff);
+          return 1;
+        }
+
+      mips_expect (" = ");
+
+      /* Lead in the hex number we are expecting: */
+      tbuff[0] = '0';
+      tbuff[1] = 'x';
+
+      /* FIXME!! only 8 bytes!  need to expand for Bfd64; 
+         which targets return 64-bit addresses?  PMON returns only 32! */
+      if (!mips_getstring (&tbuff[2], 8))
+        return 1;
+      tbuff[10] = '\0'; /* terminate the string */
+
+      if (sscanf (tbuff, "0x%08x", &bpaddr) != 1)
+        {
+          fprintf_unfiltered (gdb_stderr,
+			      "Invalid hex address from target: %s\n", tbuff);
+          return 1;
+        }
+
+      if (bpnum >= PMON_MAX_BP)
+        {
+          fprintf_unfiltered (gdb_stderr,
+			      "Error: Returned breakpoint number %d outside acceptable range (0..%d)\n",
+                              bpnum, PMON_MAX_BP - 1);
+          return 1;
+        }
+
+      if (bpaddr != addr)
+        fprintf_unfiltered (gdb_stderr, "Warning: Breakpoint addresses do not match: 0x%x != 0x%x\n", addr, bpaddr);
+
+      mips_pmon_bp_info[bpnum] = bpaddr;
+
+      mips_expect ("\r\n");
+      mips_expect (mips_monitor_prompt);
+
+      mips_enter_debug ();
+
+      return 0;
+    }
+
+  return mips_store_word (addr, BREAK_INSN, contents_cache);
+}
+
+static int
+pmon_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  if (monitor_supports_breakpoints)
+    {
+      int bpnum;
+      char tbuff[7]; /* enough for delete breakpoint command */
+
+      for (bpnum = 0; bpnum < PMON_MAX_BP; bpnum++)
+        if (mips_pmon_bp_info[bpnum] == addr)
+          break;
+
+      if (bpnum >= PMON_MAX_BP)
+        {
+          fprintf_unfiltered (gdb_stderr,
+	    "pmon_remove_breakpoint: Failed to find breakpoint at address 0x%s\n",
+	    paddr_nz (addr));
+          return 1;
+        }
+
+      if (mips_exit_debug ())
+        mips_error ("Failed to exit debug mode");
+
+      sprintf (tbuff, "db %02d\r", bpnum);
+
+      mips_send_command (tbuff, -1);
+      /* NOTE: If the breakpoint does not exist then a "Bpt <dd> not
+         set" message will be returned. */
+
+      mips_enter_debug ();
+
+      return 0;
+    }
+
+  return target_write_memory (addr, contents_cache, BREAK_INSN_SIZE);
+}
+#endif
+
+
+/* Tell whether this target can support a hardware breakpoint.  CNT
+   is the number of hardware breakpoints already installed.  This
+   implements the TARGET_CAN_USE_HARDWARE_WATCHPOINT macro.  */
+
+int
+remote_mips_can_use_hardware_watchpoint (cnt)
+     int cnt;
+{
+    return cnt < MAX_LSI_BREAKPOINTS && strcmp (target_shortname, "lsi") == 0;
+}
+
+
+/* Compute a don't care mask for the region bounding ADDR and ADDR + LEN - 1.
+   This is used for memory ref breakpoints.  */
+
+static unsigned long
+calculate_mask (addr, len)
+     CORE_ADDR addr;
+     int len;
+{
+  unsigned long mask;
+  int i;
+
+  mask = addr ^ (addr + len - 1);
+
+  for (i = 32; i >= 0; i--)
+    if (mask == 0)
+      break;
+    else
+      mask >>= 1;
+
+  mask = (unsigned long) 0xffffffff >> i;
+
+  return mask;
+}
+
+
+/* Insert a hardware breakpoint.  This works only on LSI targets, which
+   implement ordinary breakpoints using hardware facilities.  */
+
+int
+remote_mips_insert_hw_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  if (strcmp (target_shortname, "lsi") == 0)
+    return mips_insert_breakpoint (addr, contents_cache);
+  else
+    return -1;
+}
+
+
+/* Remove a hardware breakpoint.  This works only on LSI targets, which
+   implement ordinary breakpoints using hardware facilities.  */
+
+int
+remote_mips_remove_hw_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  if (strcmp (target_shortname, "lsi") == 0)
+    return mips_remove_breakpoint (addr, contents_cache);
+  else
+    return -1;
+}
+
+/* Set a data watchpoint.  ADDR and LEN should be obvious.  TYPE is 0
+   for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
+   watchpoint. */
+
+int
+remote_mips_set_watchpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     int type;
+{
+  if (set_breakpoint (addr, len, type))
+    return -1;
+
+  return 0;
+}
+
+int
+remote_mips_remove_watchpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     int type;
+{
+  if (clear_breakpoint (addr, len, type))
+    return -1;
+
+  return 0;
+}
+
+int
+remote_mips_stopped_by_watchpoint ()
+{
+  return hit_watchpoint;
+}
+
+
+/* Insert a breakpoint.  */
+
+static int
+set_breakpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     enum break_type type;
+{
+  return common_breakpoint (1, addr, len, type);
+}
+
+
+/* Clear a breakpoint.  */
+
+static int
+clear_breakpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     enum break_type type;
+{
+  return common_breakpoint (0, addr, len, type);
+}
+
+
+/* Check the error code from the return packet for an LSI breakpoint
+   command.  If there's no error, just return 0.  If it's a warning,
+   print the warning text and return 0.  If it's an error, print
+   the error text and return 1.  <ADDR> is the address of the breakpoint
+   that was being set.  <RERRFLG> is the error code returned by PMON. 
+   This is a helper function for common_breakpoint.  */
+
+static int
+check_lsi_error (addr, rerrflg)
+     CORE_ADDR addr;
+     int rerrflg;
+{
+  struct lsi_error *err;
+  char *saddr = paddr_nz (addr);	/* printable address string */
+
+  if (rerrflg == 0)		/* no error */
+    return 0;
+
+  /* Warnings can be ORed together, so check them all.  */
+  if (rerrflg & W_WARN)
+    {
+      if (monitor_warnings)
+	{
+	  int found = 0;
+	  for (err = lsi_warning_table; err->code != 0; err++)
+	    {
+	      if ((err->code & rerrflg) == err->code)
+		{
+		  found = 1;
+		  fprintf_unfiltered (gdb_stderr,
+				      "common_breakpoint (0x%s): Warning: %s\n",
+				      saddr,
+				      err->string);
+		}
+	    }
+	  if (!found)
+	    fprintf_unfiltered (gdb_stderr,
+				"common_breakpoint (0x%s): Unknown warning: 0x%x\n",
+				saddr,
+				rerrflg);
+	}
+      return 0;
+    }
+
+  /* Errors are unique, i.e. can't be ORed together.  */
+  for (err = lsi_error_table; err->code != 0; err++)
+    {
+      if ((err->code & rerrflg) == err->code)
+	{
+	  fprintf_unfiltered (gdb_stderr,
+			      "common_breakpoint (0x%s): Error: %s\n",
+			      saddr,
+			      err->string);
+	  return 1;
+	}
+    }
+  fprintf_unfiltered (gdb_stderr,
+		      "common_breakpoint (0x%s): Unknown error: 0x%x\n",
+		      saddr,
+		      rerrflg);
+  return 1;
+}
+
+
+/* This routine sends a breakpoint command to the remote target.
+
+   <SET> is 1 if setting a breakpoint, or 0 if clearing a breakpoint.
+   <ADDR> is the address of the breakpoint.
+   <LEN> the length of the region to break on.
+   <TYPE> is the type of breakpoint:
+     0 = write			(BREAK_WRITE)
+     1 = read			(BREAK_READ)
+     2 = read/write		(BREAK_ACCESS)
+     3 = instruction fetch	(BREAK_FETCH)
+
+   Return 0 if successful; otherwise 1.  */
+
+static int
+common_breakpoint (set, addr, len, type)
+     int set;
+     CORE_ADDR addr;
+     int len;
+     enum break_type type;
+{
+  char buf[DATA_MAXLEN + 1];
+  char cmd, rcmd;
+  int rpid, rerrflg, rresponse, rlen;
+  int nfields;
+
+  addr = ADDR_BITS_REMOVE (addr);
+
+  if (mips_monitor == MON_LSI)
+    {
+      if (set == 0)	/* clear breakpoint */
+	{
+	  /* The LSI PMON "clear breakpoint" has this form:
+	       <pid> 'b' <bptn> 0x0
+	       reply:
+	       <pid> 'b' 0x0 <code>
+
+	     <bptn> is a breakpoint number returned by an earlier 'B' command.
+	     Possible return codes: OK, E_BPT.  */
+
+	  int i;
+
+	  /* Search for the breakpoint in the table.  */
+	  for (i = 0; i < MAX_LSI_BREAKPOINTS; i++)
+	    if (lsi_breakpoints[i].type == type
+		&& lsi_breakpoints[i].addr == addr
+		&& lsi_breakpoints[i].len == len)
+	      break;
+
+	  /* Clear the table entry and tell PMON to clear the breakpoint.  */
+	  if (i == MAX_LSI_BREAKPOINTS)
+	    {
+	      warning ("common_breakpoint: Attempt to clear bogus breakpoint at %s\n",
+		       paddr_nz (addr));
+	      return 1;
+	    }
+
+	  lsi_breakpoints[i].type = BREAK_UNUSED;
+	  sprintf (buf, "0x0 b 0x%x 0x0", i);
+	  mips_send_packet (buf, 1);
+
+	  rlen = mips_receive_packet (buf, 1, mips_receive_wait);
+	  buf[rlen] = '\0';
+
+	  nfields = sscanf (buf, "0x%x b 0x0 0x%x", &rpid, &rerrflg);
+	  if (nfields != 2)
+	    mips_error ("common_breakpoint: Bad response from remote board: %s", buf);
+
+	  return (check_lsi_error (addr, rerrflg));
+	}
+      else	/* set a breakpoint */
+	{
+	  /* The LSI PMON "set breakpoint" command has this form:
+	       <pid> 'B' <addr> 0x0
+	       reply:
+	       <pid> 'B' <bptn> <code>
+
+	     The "set data breakpoint" command has this form:
+
+	        <pid> 'A' <addr1> <type> [<addr2>  [<value>]]
+
+		where: type= "0x1" = read
+	             "0x2" = write
+	             "0x3" = access (read or write)
+
+	     The reply returns two values:
+		     bptn - a breakpoint number, which is a small integer with
+			    possible values of zero through 255.
+		     code - an error return code, a value of zero indicates a
+			    succesful completion, other values indicate various
+			    errors and warnings.
+	      
+	     Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON.  
+
+	  */
+
+	  if (type == BREAK_FETCH)	/* instruction breakpoint */
+	    {
+	      cmd = 'B';
+	      sprintf (buf, "0x0 B 0x%s 0x0", paddr_nz (addr));
+	    }
+	  else				/* watchpoint */
+	    {
+	      cmd = 'A';
+	      sprintf (buf, "0x0 A 0x%s 0x%x 0x%s", paddr_nz (addr),
+		       type == BREAK_READ ? 1 : (type == BREAK_WRITE ? 2 : 3),
+		       paddr_nz (addr + len - 1));
+	    }
+	  mips_send_packet (buf, 1);
+
+	  rlen = mips_receive_packet (buf, 1, mips_receive_wait);
+	  buf[rlen] = '\0';
+
+	  nfields = sscanf (buf, "0x%x %c 0x%x 0x%x",
+			    &rpid, &rcmd, &rresponse, &rerrflg);
+	  if (nfields != 4 || rcmd != cmd || rresponse > 255)
+	    mips_error ("common_breakpoint: Bad response from remote board: %s", buf);
+
+	  if (rerrflg != 0)
+	    if (check_lsi_error (addr, rerrflg))
+	      return 1;
+
+	  /* rresponse contains PMON's breakpoint number.  Record the
+	     information for this breakpoint so we can clear it later.  */
+	  lsi_breakpoints[rresponse].type = type;
+	  lsi_breakpoints[rresponse].addr = addr;
+	  lsi_breakpoints[rresponse].len =  len;
+
+	  return 0;
+	}
+    }
+  else
+    {
+      /* On non-LSI targets, the breakpoint command has this form:
+	   0x0 <CMD> <ADDR> <MASK> <FLAGS>
+	 <MASK> is a don't care mask for addresses.
+	 <FLAGS> is any combination of `r', `w', or `f' for read/write/fetch.
+       */
+      unsigned long mask;
+
+      mask = calculate_mask (addr, len);
+      addr &= ~mask;
+
+      if (set)		/* set a breakpoint */
+        {
+	  char *flags;
+	  switch (type)
+	    {
+	    case BREAK_WRITE:		/* write */
+	      flags = "w";
+	      break;
+	    case BREAK_READ:		/* read */
+	      flags = "r";
+	      break;
+	    case BREAK_ACCESS:		/* read/write */
+	      flags = "rw";
+	      break;
+	    case BREAK_FETCH:		/* fetch */
+	      flags = "f";
+	      break;
+	    default:
+	      abort ();
+	    }
+
+	  cmd = 'B';
+	  sprintf (buf, "0x0 B 0x%s 0x%s %s", paddr_nz (addr),
+		   paddr_nz (mask), flags);
+	}
+      else
+	{
+	  cmd = 'b';
+	  sprintf (buf, "0x0 b 0x%s", paddr_nz (addr));
+	}
+
+      mips_send_packet (buf, 1);
+
+      rlen = mips_receive_packet (buf, 1, mips_receive_wait);
+      buf[rlen] = '\0';
+
+      nfields = sscanf (buf, "0x%x %c 0x%x 0x%x",
+			&rpid, &rcmd, &rerrflg, &rresponse);
+
+      if (nfields != 4 || rcmd != cmd)
+	mips_error ("common_breakpoint: Bad response from remote board: %s",
+		    buf);
+
+      if (rerrflg != 0)
+	{
+	  /* Ddb returns "0x0 b 0x16 0x0\000", whereas
+	     Cogent returns "0x0 b 0xffffffff 0x16\000": */
+	  if (mips_monitor == MON_DDB)
+	    rresponse = rerrflg;
+	  if (rresponse != 22) /* invalid argument */
+	    fprintf_unfiltered (gdb_stderr,
+				"common_breakpoint (0x%s):  Got error: 0x%x\n",
+				paddr_nz (addr), rresponse);
+	  return 1;
+	}
+    }
+  return 0;
+}
+
+static void
+send_srec (srec, len, addr)
+     char *srec;
+     int len;
+     CORE_ADDR addr;
+{
+  while (1)
+    {
+      int ch;
+
+      SERIAL_WRITE (mips_desc, srec, len);
+
+      ch = mips_readchar (2);
+
+      switch (ch)
+	{
+	case SERIAL_TIMEOUT:
+	  error ("Timeout during download.");
+	  break;
+	case 0x6:		/* ACK */
+	  return;
+	case 0x15:		/* NACK */
+	  fprintf_unfiltered (gdb_stderr, "Download got a NACK at byte %d!  Retrying.\n", addr);
+	  continue;
+	default:
+	  error ("Download got unexpected ack char: 0x%x, retrying.\n", ch);
+	}
+    }
+}
+
+/*  Download a binary file by converting it to S records. */
+
+static void
+mips_load_srec (args)
+     char *args;
+{
+  bfd *abfd;
+  asection *s;
+  char *buffer, srec[1024];
+  unsigned int i;
+  unsigned int srec_frame = 200;
+  int reclen;
+  static int hashmark = 1;
+
+  buffer = alloca (srec_frame * 2 + 256);
+
+  abfd = bfd_openr (args, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", args);
+      return;
+    }
+
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+
+/* This actually causes a download in the IDT binary format: */
+  mips_send_command (LOAD_CMD, 0);
+
+  for (s = abfd->sections; s; s = s->next)
+    {
+      if (s->flags & SEC_LOAD)
+	{
+	  unsigned int numbytes;
+
+	  /* FIXME!  vma too small?? */
+	  printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma,
+			   s->vma + s->_raw_size);
+	  gdb_flush (gdb_stdout);
+
+	  for (i = 0; i < s->_raw_size; i += numbytes)
+	    {
+	      numbytes = min (srec_frame, s->_raw_size - i);
+
+	      bfd_get_section_contents (abfd, s, buffer, i, numbytes);
+
+	      reclen = mips_make_srec (srec, '3', s->vma + i, buffer, numbytes);
+	      send_srec (srec, reclen, s->vma + i);
+
+	      if (hashmark)
+		{
+		  putchar_unfiltered ('#');
+		  gdb_flush (gdb_stdout);
+		}
+
+	    } /* Per-packet (or S-record) loop */
+	  
+	  putchar_unfiltered ('\n');
+	} /* Loadable sections */
+    }
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+  
+  /* Write a type 7 terminator record. no data for a type 7, and there
+     is no data, so len is 0.  */
+
+  reclen = mips_make_srec (srec, '7', abfd->start_address, NULL, 0);
+
+  send_srec (srec, reclen, abfd->start_address);
+
+  SERIAL_FLUSH_INPUT (mips_desc);
+}
+
+/*
+ * mips_make_srec -- make an srecord. This writes each line, one at a
+ *	time, each with it's own header and trailer line.
+ *	An srecord looks like this:
+ *
+ * byte count-+     address
+ * start ---+ |        |       data        +- checksum
+ *	    | |        |                   |
+ *	  S01000006F6B692D746573742E73726563E4
+ *	  S315000448600000000000000000FC00005900000000E9
+ *	  S31A0004000023C1400037DE00F023604000377B009020825000348D
+ *	  S30B0004485A0000000000004E
+ *	  S70500040000F6
+ *
+ *	S<type><length><address><data><checksum>
+ *
+ *      Where
+ *      - length
+ *        is the number of bytes following upto the checksum. Note that
+ *        this is not the number of chars following, since it takes two
+ *        chars to represent a byte.
+ *      - type
+ *        is one of:
+ *        0) header record
+ *        1) two byte address data record
+ *        2) three byte address data record
+ *        3) four byte address data record
+ *        7) four byte address termination record
+ *        8) three byte address termination record
+ *        9) two byte address termination record
+ *       
+ *      - address
+ *        is the start address of the data following, or in the case of
+ *        a termination record, the start address of the image
+ *      - data
+ *        is the data.
+ *      - checksum
+ *	  is the sum of all the raw byte data in the record, from the length
+ *        upwards, modulo 256 and subtracted from 255.
+ *
+ * This routine returns the length of the S-record.
+ *
+ */
+
+static int
+mips_make_srec (buf, type, memaddr, myaddr, len)
+     char *buf;
+     int type;
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  unsigned char checksum;
+  int i;
+
+  /* Create the header for the srec. addr_size is the number of bytes in the address,
+     and 1 is the number of bytes in the count.  */
+
+  /* FIXME!! bigger buf required for 64-bit! */
+  buf[0] = 'S';
+  buf[1] = type;
+  buf[2] = len + 4 + 1;		/* len + 4 byte address + 1 byte checksum */
+  /* This assumes S3 style downloads (4byte addresses). There should
+     probably be a check, or the code changed to make it more
+     explicit. */
+  buf[3] = memaddr >> 24;
+  buf[4] = memaddr >> 16;
+  buf[5] = memaddr >> 8;
+  buf[6] = memaddr;
+  memcpy (&buf[7], myaddr, len);
+
+  /* Note that the checksum is calculated on the raw data, not the
+     hexified data.  It includes the length, address and the data
+     portions of the packet.  */
+  checksum = 0;
+  buf += 2;			/* Point at length byte */
+  for (i = 0; i < len + 4 + 1; i++)
+    checksum += *buf++;
+
+  *buf = ~checksum;
+
+  return len + 8;
+}
+
+/* The following manifest controls whether we enable the simple flow
+   control support provided by the monitor. If enabled the code will
+   wait for an affirmative ACK between transmitting packets. */
+#define DOETXACK (1)
+
+/* The PMON fast-download uses an encoded packet format constructed of
+   3byte data packets (encoded as 4 printable ASCII characters), and
+   escape sequences (preceded by a '/'):
+
+	'K'     clear checksum
+	'C'     compare checksum (12bit value, not included in checksum calculation)
+	'S'     define symbol name (for addr) terminated with "," and padded to 4char boundary
+	'Z'     zero fill multiple of 3bytes
+	'B'     byte (12bit encoded value, of 8bit data)
+	'A'     address (36bit encoded value)
+	'E'     define entry as original address, and exit load
+
+   The packets are processed in 4 character chunks, so the escape
+   sequences that do not have any data (or variable length data)
+   should be padded to a 4 character boundary.  The decoder will give
+   an error if the complete message block size is not a multiple of
+   4bytes (size of record).
+
+   The encoding of numbers is done in 6bit fields.  The 6bit value is
+   used to index into this string to get the specific character
+   encoding for the value: */
+static char encoding[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,.";
+
+/* Convert the number of bits required into an encoded number, 6bits
+   at a time (range 0..63).  Keep a checksum if required (passed
+   pointer non-NULL). The function returns the number of encoded
+   characters written into the buffer. */
+static int
+pmon_makeb64 (v, p, n, chksum)
+     unsigned long v;
+     char *p;
+     int n;
+     int *chksum;
+{
+  int count = (n / 6);
+
+  if ((n % 12) != 0) {
+    fprintf_unfiltered(gdb_stderr,
+		       "Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n",n,(n == 1)?"":"s");
+    return(0);
+  }
+  if (n > 36) {
+    fprintf_unfiltered(gdb_stderr,
+		       "Fast encoding cannot process more than 36bits at the moment: %dbits\n",n);
+    return(0);
+  }
+
+  /* Deal with the checksum: */
+  if (chksum != NULL) {
+    switch (n) {
+     case 36: *chksum += ((v >> 24) & 0xFFF);
+     case 24: *chksum += ((v >> 12) & 0xFFF);
+     case 12: *chksum += ((v >>  0) & 0xFFF);
+    }
+  }
+
+  do {
+    n -= 6;
+    *p++ = encoding[(v >> n) & 0x3F];
+  } while (n > 0);
+
+  return(count);
+}
+
+/* Shorthand function (that could be in-lined) to output the zero-fill
+   escape sequence into the data stream. */
+static int
+pmon_zeroset (recsize, buff, amount, chksum)
+     int recsize;
+     char **buff;
+     int *amount;
+     unsigned int *chksum;
+{
+  int count;
+
+  sprintf(*buff,"/Z");
+  count = pmon_makeb64 (*amount, (*buff + 2), 12, chksum);
+  *buff += (count + 2);
+  *amount = 0;
+  return(recsize + count + 2);
+}
+
+static int
+pmon_checkset (recsize, buff, value)
+     int recsize;
+     char **buff;
+     int *value;
+{
+  int count;
+
+  /* Add the checksum (without updating the value): */
+  sprintf (*buff, "/C");
+  count = pmon_makeb64 (*value, (*buff + 2), 12, NULL);
+  *buff += (count + 2);
+  sprintf (*buff, "\n");
+  *buff += 2; /* include zero terminator */
+  /* Forcing a checksum validation clears the sum: */
+  *value = 0;
+  return(recsize + count + 3);
+}
+
+/* Amount of padding we leave after at the end of the output buffer,
+   for the checksum and line termination characters: */
+#define CHECKSIZE (4 + 4 + 4 + 2)
+/* zero-fill, checksum, transfer end and line termination space. */
+
+/* The amount of binary data loaded from the object file in a single
+   operation: */
+#define BINCHUNK (1024)
+
+/* Maximum line of data accepted by the monitor: */
+#define MAXRECSIZE (550)
+/* NOTE: This constant depends on the monitor being used. This value
+   is for PMON 5.x on the Cogent Vr4300 board. */
+
+static void
+pmon_make_fastrec (outbuf, inbuf, inptr, inamount, recsize, csum, zerofill)
+     char **outbuf;
+     unsigned char *inbuf;
+     int *inptr;
+     int inamount;
+     int *recsize;
+     unsigned int *csum;
+     unsigned int *zerofill;
+{
+  int count = 0;
+  char *p = *outbuf;
+
+  /* This is a simple check to ensure that our data will fit within
+     the maximum allowable record size. Each record output is 4bytes
+     in length. We must allow space for a pending zero fill command,
+     the record, and a checksum record. */
+  while ((*recsize < (MAXRECSIZE - CHECKSIZE)) && ((inamount - *inptr) > 0)) {
+    /* Process the binary data: */
+    if ((inamount - *inptr) < 3) {
+      if (*zerofill != 0)
+       *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
+      sprintf (p, "/B");
+      count = pmon_makeb64 (inbuf[*inptr], &p[2], 12, csum);
+      p += (2 + count);
+      *recsize += (2 + count);
+      (*inptr)++;
+    } else {
+      unsigned int value = ((inbuf[*inptr + 0] << 16) | (inbuf[*inptr + 1] << 8) | inbuf[*inptr + 2]);
+      /* Simple check for zero data. TODO: A better check would be
+         to check the last, and then the middle byte for being zero
+         (if the first byte is not). We could then check for
+         following runs of zeros, and if above a certain size it is
+         worth the 4 or 8 character hit of the byte insertions used
+         to pad to the start of the zeroes. NOTE: This also depends
+         on the alignment at the end of the zero run. */
+      if (value == 0x00000000) {
+        (*zerofill)++;
+        if (*zerofill == 0xFFF) /* 12bit counter */
+         *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
+      }else {
+        if (*zerofill != 0)
+         *recsize = pmon_zeroset (*recsize, &p, zerofill, csum);
+        count = pmon_makeb64 (value, p, 24, csum);
+        p += count;
+        *recsize += count;
+      }
+      *inptr += 3;
+    }
+  }
+
+  *outbuf = p;
+  return;
+}
+
+static int
+pmon_check_ack(mesg)
+     char *mesg;
+{
+#if defined(DOETXACK)
+  int c;
+
+  if (!tftp_in_use)
+    {
+      c = SERIAL_READCHAR (udp_in_use ? udp_desc : mips_desc, 2);
+      if ((c == SERIAL_TIMEOUT) || (c != 0x06))
+	{
+	  fprintf_unfiltered (gdb_stderr,
+			      "Failed to receive valid ACK for %s\n", mesg);
+	  return(-1); /* terminate the download */
+	}
+    }
+#endif /* DOETXACK */
+  return(0);
+}
+
+/* pmon_download - Send a sequence of characters to the PMON download port,
+   which is either a serial port or a UDP socket.  */
+
+static void
+pmon_start_download ()
+{
+  if (tftp_in_use)
+    {
+      /* Create the temporary download file.  */
+      if ((tftp_file = fopen (tftp_localname, "w")) == NULL)
+	perror_with_name (tftp_localname);
+    }
+  else
+    {
+      mips_send_command (udp_in_use ? LOAD_CMD_UDP : LOAD_CMD, 0);
+      mips_expect ("Downloading from ");
+      mips_expect (udp_in_use ? "udp" : "tty0");
+      mips_expect (", ^C to abort\r\n");
+    }
+}
+
+static int
+mips_expect_download (char *string)
+{
+  if (!mips_expect (string))
+    {
+      fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n");
+      if (tftp_in_use)
+	remove (tftp_localname);	/* Remove temporary file */
+      return 0;
+    }
+  else
+    return 1;
+}
+
+static void
+pmon_end_download (final, bintotal)
+     int final;
+     int bintotal;
+{
+  char hexnumber[9]; /* includes '\0' space */
+
+  if (tftp_in_use)
+    {
+      static char *load_cmd_prefix = "load -b -s ";
+      char *cmd;
+      struct stat stbuf;
+
+      /* Close off the temporary file containing the load data.  */
+      fclose (tftp_file);
+      tftp_file = NULL;
+
+      /* Make the temporary file readable by the world.  */
+      if (stat (tftp_localname, &stbuf) == 0)
+	chmod (tftp_localname, stbuf.st_mode | S_IROTH);
+
+      /* Must reinitialize the board to prevent PMON from crashing.  */
+      mips_send_command ("initEther\r", -1);
+
+      /* Send the load command.  */
+      cmd = xmalloc (strlen (load_cmd_prefix) + strlen (tftp_name) + 2);
+      strcpy (cmd, load_cmd_prefix);
+      strcat (cmd, tftp_name);
+      strcat (cmd, "\r");
+      mips_send_command (cmd, 0);
+      free (cmd);
+      if (!mips_expect_download ("Downloading from "))
+	return;
+      if (!mips_expect_download (tftp_name))
+	return;
+      if (!mips_expect_download (", ^C to abort\r\n"))
+	return;
+    }
+
+  /* Wait for the stuff that PMON prints after the load has completed.
+     The timeout value for use in the tftp case (15 seconds) was picked
+     arbitrarily but might be too small for really large downloads. FIXME. */
+  if (mips_monitor == MON_LSI)
+    {
+      pmon_check_ack ("termination");
+      mips_expect_timeout ("Entry address is ", tftp_in_use ? 15 : 2);
+    }
+  else
+    mips_expect_timeout ("Entry Address  = ", tftp_in_use ? 15 : 2);
+
+  sprintf (hexnumber,"%x",final);
+  mips_expect (hexnumber);
+  mips_expect ("\r\n");
+  if (mips_monitor != MON_LSI)
+    pmon_check_ack ("termination");
+  mips_expect ("\r\ntotal = 0x");
+  sprintf (hexnumber,"%x",bintotal);
+  mips_expect (hexnumber);
+  if (!mips_expect_download (" bytes\r\n"))
+    return;
+
+  if (tftp_in_use)
+    remove (tftp_localname);	/* Remove temporary file */
+}
+
+static void
+pmon_download (buffer, length)
+     char *buffer;
+     int length;
+{
+  if (tftp_in_use)
+    fwrite (buffer, 1, length, tftp_file);
+  else
+    SERIAL_WRITE (udp_in_use ? udp_desc : mips_desc, buffer, length);
+}
+
+static void
+pmon_load_fast (file)
+     char *file;
+{
+  bfd *abfd;
+  asection *s;
+  unsigned char *binbuf;
+  char *buffer;
+  int reclen;
+  unsigned int csum = 0;
+  int hashmark = !tftp_in_use;
+  int bintotal = 0;
+  int final = 0;
+  int finished = 0;
+
+  buffer = (char *)xmalloc(MAXRECSIZE + 1);
+  binbuf = (unsigned char *)xmalloc(BINCHUNK);
+
+  abfd = bfd_openr(file,0);
+  if (!abfd)
+   {
+     printf_filtered ("Unable to open file %s\n",file);
+     return;
+   }
+
+  if (bfd_check_format(abfd,bfd_object) == 0)
+   {
+     printf_filtered("File is not an object file\n");
+     return;
+   }
+
+  /* Setup the required download state: */
+  mips_send_command ("set dlproto etxack\r", -1);
+  mips_send_command ("set dlecho off\r", -1);
+  /* NOTE: We get a "cannot set variable" message if the variable is
+     already defined to have the argument we give. The code doesn't
+     care, since it just scans to the next prompt anyway. */
+  /* Start the download: */
+  pmon_start_download();
+  
+  /* Zero the checksum */
+  sprintf(buffer,"/Kxx\n");
+  reclen = strlen(buffer);
+  pmon_download (buffer, reclen);
+  finished = pmon_check_ack("/Kxx");
+
+  for (s = abfd->sections; s && !finished; s = s->next)
+   if (s->flags & SEC_LOAD) /* only deal with loadable sections */
+    {
+      bintotal += s->_raw_size;
+      final = (s->vma + s->_raw_size);
+
+      printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, (unsigned int)s->vma,
+                       (unsigned int)(s->vma + s->_raw_size));
+      gdb_flush (gdb_stdout);
+
+      /* Output the starting address */
+      sprintf(buffer,"/A");
+      reclen = pmon_makeb64(s->vma,&buffer[2],36,&csum);
+      buffer[2 + reclen] = '\n';
+      buffer[3 + reclen] = '\0';
+      reclen += 3; /* for the initial escape code and carriage return */
+      pmon_download (buffer, reclen);
+      finished = pmon_check_ack("/A");
+
+      if (!finished)
+       {
+         unsigned int binamount;
+         unsigned int zerofill = 0;
+         char *bp = buffer;
+         unsigned int i;
+
+         reclen = 0;
+
+         for (i = 0; ((i < s->_raw_size) && !finished); i += binamount) {
+           int binptr = 0;
+
+           binamount = min (BINCHUNK, s->_raw_size - i);
+
+           bfd_get_section_contents (abfd, s, binbuf, i, binamount);
+
+           /* This keeps a rolling checksum, until we decide to output
+              the line: */
+           for (; ((binamount - binptr) > 0);) {
+             pmon_make_fastrec (&bp, binbuf, &binptr, binamount, &reclen, &csum, &zerofill);
+             if (reclen >= (MAXRECSIZE - CHECKSIZE)) {
+               reclen = pmon_checkset (reclen, &bp, &csum);
+               pmon_download (buffer, reclen);
+               finished = pmon_check_ack("data record");
+               if (finished) {
+                 zerofill = 0; /* do not transmit pending zerofills */
+                 break;
+               }
+
+               if (hashmark) {
+                 putchar_unfiltered ('#');
+                 gdb_flush (gdb_stdout);
+               }
+
+               bp = buffer;
+               reclen = 0; /* buffer processed */
+             }
+           }
+         }
+
+         /* Ensure no out-standing zerofill requests: */
+         if (zerofill != 0)
+          reclen = pmon_zeroset (reclen, &bp, &zerofill, &csum);
+
+         /* and then flush the line: */
+         if (reclen > 0) {
+           reclen = pmon_checkset (reclen, &bp, &csum);
+           /* Currently pmon_checkset outputs the line terminator by
+              default, so we write out the buffer so far: */
+           pmon_download (buffer, reclen);
+           finished = pmon_check_ack("record remnant");
+         }
+       }
+
+      putchar_unfiltered ('\n');
+    }
+
+  /* Terminate the transfer. We know that we have an empty output
+     buffer at this point. */
+  sprintf (buffer, "/E/E\n"); /* include dummy padding characters */
+  reclen = strlen (buffer);
+  pmon_download (buffer, reclen);
+
+  if (finished) { /* Ignore the termination message: */
+    SERIAL_FLUSH_INPUT (udp_in_use ? udp_desc : mips_desc);
+  } else { /* Deal with termination message: */
+    pmon_end_download (final, bintotal);
+  }
+
+  return;
+}
+
+/* mips_load -- download a file. */
+
+static void
+mips_load (file, from_tty)
+    char *file;
+    int  from_tty;
+{
+  /* Get the board out of remote debugging mode.  */
+  if (mips_exit_debug ())
+    error ("mips_load:  Couldn't get into monitor mode.");
+
+  if (mips_monitor != MON_IDT)
+   pmon_load_fast (file);
+  else
+   mips_load_srec (file);
+
+  mips_initialize ();
+
+  /* Finally, make the PC point at the start address */
+  if (mips_monitor != MON_IDT)
+    {
+      /* Work around problem where PMON monitor updates the PC after a load
+	 to a different value than GDB thinks it has. The following ensures
+	 that the write_pc() WILL update the PC value: */
+      register_valid[PC_REGNUM] = 0;
+    }
+  if (exec_bfd)
+    write_pc (bfd_get_start_address (exec_bfd));
+
+  inferior_pid = 0;		/* No process now */
+
+/* This is necessary because many things were based on the PC at the time that
+   we attached to the monitor, which is no longer valid now that we have loaded
+   new code (and just changed the PC).  Another way to do this might be to call
+   normal_stop, except that the stack may not be valid, and things would get
+   horribly confused... */
+
+  clear_symtab_users ();
+}
+
+
+/* Pass the command argument as a packet to PMON verbatim.  */
+
+static void
+pmon_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[DATA_MAXLEN + 1];
+  int rlen;
+
+  sprintf (buf, "0x0 %s", args);
+  mips_send_packet (buf, 1);
+  printf_filtered ("Send packet: %s\n", buf);
+
+  rlen = mips_receive_packet (buf, 1, mips_receive_wait);
+  buf[rlen] = '\0';
+  printf_filtered ("Received packet: %s\n", buf);
+}
+
+void
+_initialize_remote_mips ()
+{
+  /* Initialize the fields in mips_ops that are common to all four targets.  */
+  mips_ops.to_longname = "Remote MIPS debugging over serial line";
+  mips_ops.to_close = mips_close;
+  mips_ops.to_detach = mips_detach;
+  mips_ops.to_resume = mips_resume;
+  mips_ops.to_fetch_registers = mips_fetch_registers;
+  mips_ops.to_store_registers = mips_store_registers;
+  mips_ops.to_prepare_to_store = mips_prepare_to_store;
+  mips_ops.to_xfer_memory = mips_xfer_memory;
+  mips_ops.to_files_info = mips_files_info;
+  mips_ops.to_insert_breakpoint = mips_insert_breakpoint;
+  mips_ops.to_remove_breakpoint = mips_remove_breakpoint;
+  mips_ops.to_kill = mips_kill;
+  mips_ops.to_load = mips_load;
+  mips_ops.to_create_inferior = mips_create_inferior;
+  mips_ops.to_mourn_inferior = mips_mourn_inferior;
+  mips_ops.to_stratum = process_stratum;
+  mips_ops.to_has_all_memory = 1;
+  mips_ops.to_has_memory = 1;
+  mips_ops.to_has_stack = 1;
+  mips_ops.to_has_registers = 1;
+  mips_ops.to_has_execution = 1;
+  mips_ops.to_magic = OPS_MAGIC;
+
+  /* Copy the common fields to all four target vectors.  */
+  pmon_ops = ddb_ops = lsi_ops = mips_ops;
+
+  /* Initialize target-specific fields in the target vectors.  */
+  mips_ops.to_shortname = "mips";
+  mips_ops.to_doc = "\
+Debug a board using the MIPS remote debugging protocol over a serial line.\n\
+The argument is the device it is connected to or, if it contains a colon,\n\
+HOST:PORT to access a board over a network";
+  mips_ops.to_open = mips_open;
+  mips_ops.to_wait = mips_wait;
+
+  pmon_ops.to_shortname = "pmon";
+  pmon_ops.to_doc =   "\
+Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
+line. The argument is the device it is connected to or, if it contains a\n\
+colon, HOST:PORT to access a board over a network";
+  pmon_ops.to_open = pmon_open;
+  pmon_ops.to_wait = mips_wait;
+
+  ddb_ops.to_shortname = "ddb";
+  ddb_ops.to_doc = "\
+Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
+line. The first argument is the device it is connected to or, if it contains\n\
+a colon, HOST:PORT to access a board over a network.  The optional second\n\
+parameter is the temporary file in the form HOST:FILENAME to be used for\n\
+TFTP downloads to the board.  The optional third parameter is the local name\n\
+of the TFTP temporary file, if it differs from the filename seen by the board.";
+  ddb_ops.to_open = ddb_open;
+  ddb_ops.to_wait = mips_wait;
+
+  lsi_ops.to_shortname = "lsi";
+  lsi_ops.to_doc = pmon_ops.to_doc;
+  lsi_ops.to_open = lsi_open;
+  lsi_ops.to_wait = mips_wait;
+
+  /* Add the targets.  */
+  add_target (&mips_ops);
+  add_target (&pmon_ops);
+  add_target (&ddb_ops);
+  add_target (&lsi_ops);
+
+  add_show_from_set (
+    add_set_cmd ("timeout", no_class, var_zinteger,
+		 (char *) &mips_receive_wait,
+		 "Set timeout in seconds for remote MIPS serial I/O.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("retransmit-timeout", no_class, var_zinteger,
+		 (char *) &mips_retransmit_wait,
+	 "Set retransmit timeout in seconds for remote MIPS serial I/O.\n\
+This is the number of seconds to wait for an acknowledgement to a packet\n\
+before resending the packet.", &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("syn-garbage-limit", no_class, var_zinteger,
+		 (char *) &mips_syn_garbage,
+"Set the maximum number of characters to ignore when scanning for a SYN.\n\
+This is the maximum number of characters GDB will ignore when trying to\n\
+synchronize with the remote system.  A value of -1 means that there is no limit\n\
+(Note that these characters are printed out even though they are ignored.)",
+		 &setlist),
+		     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("monitor-prompt", class_obscure, var_string,
+		  (char *) &mips_monitor_prompt,
+		  "Set the prompt that GDB expects from the monitor.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set (
+    add_set_cmd ("monitor-warnings", class_obscure, var_zinteger,
+		 (char *)&monitor_warnings,
+		 "Set printing of monitor warnings.\n"
+		 "When enabled, monitor warnings about hardware breakpoints "
+		 "will be displayed.",
+		 &setlist),
+		     &showlist);
+
+  add_com ("pmon <command>", class_obscure, pmon_command,
+	   "Send a packet to PMON (must be in debug mode)."); 
+}
diff --git a/gdb/remote-mm.c b/gdb/remote-mm.c
new file mode 100644
index 0000000..19455b4
--- /dev/null
+++ b/gdb/remote-mm.c
@@ -0,0 +1,1673 @@
+/* Remote debugging interface for Am290*0 running MiniMON monitor, for GDB.
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+   Originally written by Daniel Mann at AMD.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is like remote.c but ecpects MiniMON to be running on the Am29000 
+   target hardware.
+ - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this
+	file to gdb 3.95.  I was unable to get this working on sun3os4
+	with termio, only with sgtty.  Because we are only attempting to
+	use this module to debug our kernel, which is already loaded when
+	gdb is started up, I did not code up the file downloading facilities.  
+	As a result this module has only the stubs to download files. 
+	You should get tagged at compile time if you need to make any 
+	changes/additions.  */
+ 
+#include "defs.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <errno.h>
+#include "gdb_string.h"
+#include "terminal.h"
+#include "minimon.h"
+#include "target.h"
+
+/* Offset of member MEMBER in a struct of type TYPE.  */
+#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
+
+#define DRAIN_INPUT()	(msg_recv_serial((union msg_t*)0))
+
+extern int stop_soon_quietly;           /* for wait_for_inferior */
+
+static void mm_resume();
+static void mm_fetch_registers ();
+static int fetch_register ();
+static void mm_store_registers ();
+static int store_register ();
+static int regnum_to_srnum();
+static void  mm_close ();
+static char* msg_str();
+static char* error_msg_str();
+static int expect_msg();
+static void init_target_mm();
+static int mm_memory_space();
+
+#define FREEZE_MODE     (read_register(CPS_REGNUM) && 0x400)
+#define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE)
+
+/* FIXME: Replace with `set remotedebug'.  */
+#define LLOG_FILE "minimon.log"
+#if defined (LOG_FILE)
+FILE *log_file;
+#endif
+
+/*  
+ * Size of message buffers.  I couldn't get memory reads to work when
+ * the byte_count was larger than 512 (it may be a baud rate problem).
+ */
+#define BUFER_SIZE  512		
+/* 
+ * Size of data area in message buffer on the TARGET (remote system).
+ */
+#define MAXDATA_T  (target_config.max_msg_size - \
+			offsetof(struct write_r_msg_t,data[0]))
+/*		 
+ * Size of data area in message buffer on the HOST (gdb). 
+ */
+#define MAXDATA_H  (BUFER_SIZE - offsetof(struct write_r_msg_t,data[0]))
+/* 
+ * Defined as the minimum size of data areas of the two message buffers 
+ */
+#define MAXDATA	   (MAXDATA_H < MAXDATA_T ? MAXDATA_H : MAXDATA_T)
+
+static char out_buf[BUFER_SIZE];
+static char  in_buf[BUFER_SIZE];
+
+int msg_recv_serial();
+int msg_send_serial();
+
+#define MAX_RETRIES 5000
+extern struct target_ops mm_ops;             /* Forward declaration */
+struct config_msg_t  target_config;	/* HIF needs this */
+union msg_t  *out_msg_buf = (union msg_t*)out_buf;
+union msg_t  *in_msg_buf  = (union msg_t*)in_buf;
+
+static int timeout = 5;
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   mm_open knows that we don't have a file open when the program
+   starts.  */
+int mm_desc = -1;
+
+/* stream which is fdopen'd from mm_desc.  Only valid when
+   mm_desc != -1.  */
+FILE *mm_stream;
+
+/* Called when SIGALRM signal sent due to alarm() timeout.  */
+#ifndef HAVE_TERMIO
+
+#ifndef __STDC__
+# ifndef volatile
+#  define volatile /**/
+# endif
+#endif
+volatile int n_alarms;
+
+static void
+mm_timer ()
+{
+#if 0
+  if (kiodebug)
+    printf ("mm_timer called\n");
+#endif
+  n_alarms++;
+}
+#endif	/* HAVE_TERMIO */
+
+/* malloc'd name of the program on the remote system.  */
+static char *prog_name = NULL;
+
+
+/* Number of SIGTRAPs we need to simulate.  That is, the next
+   NEED_ARTIFICIAL_TRAP calls to mm_wait should just return
+   SIGTRAP without actually waiting for anything.  */
+
+/**************************************************** REMOTE_CREATE_INFERIOR */
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+mm_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+#define MAX_TOKENS 25
+#define BUFFER_SIZE 256
+   int	token_count;
+   int	result;
+   char	*token[MAX_TOKENS];
+   char	cmd_line[BUFFER_SIZE];
+
+  if (args && *args)
+    error ("Can't pass arguments to remote mm process (yet).");
+
+  if (execfile == 0 /* || exec_bfd == 0 */ )
+    error ("No executable file specified");
+
+  if (!mm_stream) {
+        printf("Minimon not open yet.\n");
+	return;
+  }
+
+  /* On ultra3 (NYU) we assume the kernel is already running so there is
+     no file to download.
+     FIXME: Fixed required here -> load your program, possibly with mm_load().
+     */
+  printf_filtered ("\n\
+Assuming you are at NYU debuging a kernel, i.e., no need to download.\n\n");
+
+  /* We will get a task spawn event immediately.  */
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+  stop_soon_quietly = 1;
+  proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+  normal_stop ();
+}
+/**************************************************** REMOTE_MOURN_INFERIOR */
+static void
+mm_mourn()
+{
+        pop_target ();                /* Pop back to no-child state */
+        generic_mourn_inferior ();
+}
+
+/********************************************************************** damn_b
+*/
+/* Translate baud rates from integers to damn B_codes.  Unix should
+   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
+
+#ifndef B19200
+#define B19200 EXTA
+#endif
+#ifndef B38400
+#define B38400 EXTB
+#endif
+
+static struct {int rate, damn_b;} baudtab[] = {
+	{0, B0},
+	{50, B50},
+	{75, B75},
+	{110, B110},
+	{134, B134},
+	{150, B150},
+	{200, B200},
+	{300, B300},
+	{600, B600},
+	{1200, B1200},
+	{1800, B1800},
+	{2400, B2400},
+	{4800, B4800},
+	{9600, B9600},
+	{19200, B19200},
+	{38400, B38400},
+	{-1, -1},
+};
+
+static int damn_b (rate)
+     int rate;
+{
+  int i;
+
+  for (i = 0; baudtab[i].rate != -1; i++)
+    if (rate == baudtab[i].rate) return baudtab[i].damn_b;
+  return B38400;	/* Random */
+}
+
+
+/***************************************************************** REMOTE_OPEN
+** Open a connection to remote minimon.
+   NAME is the filename used for communication, then a space,
+   then the baud rate.
+   'target adapt /dev/ttya 9600 [prognam]' for example.
+ */
+
+static char *dev_name;
+int baudrate = 9600;
+static void
+mm_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  TERMINAL sg;
+  unsigned int prl;
+  char *p;
+
+  /* Find the first whitespace character, it separates dev_name from
+     prog_name.  */
+  for (p = name;
+       p && *p && !isspace (*p); p++)
+    ;
+  if (p == 0 || *p == '\0')
+erroid:
+    error ("Usage : <command> <serial-device> <baud-rate> [progname]");
+  dev_name = (char*)xmalloc (p - name + 1);
+  strncpy (dev_name, name, p - name);
+  dev_name[p - name] = '\0';
+
+  /* Skip over the whitespace after dev_name */
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (1 != sscanf (p, "%d ", &baudrate))
+    goto erroid;
+
+  /* Skip the number and then the spaces */
+  for (; isdigit (*p); p++)
+    /*EMPTY*/;
+  for (; isspace (*p); p++)
+    /*EMPTY*/;
+  
+  if (prog_name != NULL)
+    free (prog_name);
+  prog_name = savestring (p, strlen (p));
+
+
+  if (mm_desc >= 0)
+    close (mm_desc);
+
+  mm_desc = open (dev_name, O_RDWR);
+  if (mm_desc < 0)
+    perror_with_name (dev_name);
+  ioctl (mm_desc, TIOCGETP, &sg);
+#ifdef HAVE_TERMIO
+  sg.c_cc[VMIN] = 0;		/* read with timeout.  */
+  sg.c_cc[VTIME] = timeout * 10;
+  sg.c_lflag &= ~(ICANON | ECHO);
+  sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);
+#else
+  sg.sg_ispeed = damn_b (baudrate);
+  sg.sg_ospeed = damn_b (baudrate);
+  sg.sg_flags |= RAW;
+  sg.sg_flags |= ANYP;
+  sg.sg_flags &= ~ECHO;
+#endif
+
+
+  ioctl (mm_desc, TIOCSETP, &sg);
+  mm_stream = fdopen (mm_desc, "r+");
+
+  push_target (&mm_ops);
+
+#ifndef HAVE_TERMIO
+#ifndef NO_SIGINTERRUPT
+  /* Cause SIGALRM's to make reads fail with EINTR instead of resuming
+     the read.  */
+  if (siginterrupt (SIGALRM, 1) != 0)
+    perror ("mm_open: error in siginterrupt");
+#endif
+
+  /* Set up read timeout timer.  */
+  if ((void (*)) signal (SIGALRM, mm_timer) == (void (*)) -1)
+    perror ("mm_open: error in signal");
+#endif
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+#endif
+   /*
+   ** Initialize target configuration structure (global)
+   */
+   DRAIN_INPUT();
+   out_msg_buf->config_req_msg.code = CONFIG_REQ;
+   out_msg_buf->config_req_msg.length = 4*0;
+   msg_send_serial(out_msg_buf); /* send config request message */
+
+   expect_msg(CONFIG,in_msg_buf,1);
+
+  a29k_get_processor_type ();
+
+  /* Print out some stuff, letting the user now what's going on */
+  printf_filtered("Connected to MiniMon via %s.\n", dev_name);
+    /* FIXME: can this restriction be removed? */
+  printf_filtered("Remote debugging using virtual addresses works only\n");
+  printf_filtered("\twhen virtual addresses map 1:1 to physical addresses.\n")
+;
+  if (processor_type != a29k_freeze_mode) {
+        fprintf_filtered(gdb_stderr,
+        "Freeze-mode debugging not available, and can only be done on an A29050.\n");
+  }
+
+   target_config.code = CONFIG;
+   target_config.length = 0;
+   target_config.processor_id = in_msg_buf->config_msg.processor_id;
+   target_config.version = in_msg_buf->config_msg.version;
+   target_config.I_mem_start = in_msg_buf->config_msg.I_mem_start;
+   target_config.I_mem_size = in_msg_buf->config_msg.I_mem_size;
+   target_config.D_mem_start = in_msg_buf->config_msg.D_mem_start;
+   target_config.D_mem_size = in_msg_buf->config_msg.D_mem_size;
+   target_config.ROM_start = in_msg_buf->config_msg.ROM_start;
+   target_config.ROM_size =  in_msg_buf->config_msg.ROM_size;
+   target_config.max_msg_size = in_msg_buf->config_msg.max_msg_size;
+   target_config.max_bkpts = in_msg_buf->config_msg.max_bkpts;
+   target_config.coprocessor = in_msg_buf->config_msg.coprocessor;
+   target_config.reserved = in_msg_buf->config_msg.reserved;
+   if (from_tty) {
+   	printf("Connected to MiniMON :\n");
+	printf("    Debugcore version            %d.%d\n",
+		0x0f & (target_config.version >> 4),
+		0x0f & (target_config.version ) );
+	printf("    Configuration version        %d.%d\n",
+		0x0f & (target_config.version >> 12),
+		0x0f & (target_config.version >>  8) );
+	printf("    Message system version       %d.%d\n",
+		0x0f & (target_config.version >> 20),
+		0x0f & (target_config.version >> 16) );
+	printf("    Communication driver version %d.%d\n",
+		0x0f & (target_config.version >> 28),
+		0x0f & (target_config.version >> 24) );
+   }
+
+  /* Leave the target running... 
+   * The above message stopped the target in the dbg core (MiniMon),  
+   * so restart the target out of MiniMon, 
+   */
+  out_msg_buf->go_msg.code = GO;
+  out_msg_buf->go_msg.length = 0;
+  msg_send_serial(out_msg_buf);
+  /* No message to expect after a GO */
+}
+
+/**************************************************************** REMOTE_CLOSE
+** Close the open connection to the minimon debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+static void
+mm_close (quitting)	/*FIXME: how is quitting used */
+     int quitting;
+{
+  if (mm_desc < 0)
+    error ("Can't close remote connection: not debugging remotely.");
+
+  /* We should never get here if there isn't something valid in
+     mm_desc and mm_stream.  
+
+     Due to a bug in Unix, fclose closes not only the stdio stream,
+     but also the file descriptor.  So we don't actually close
+     mm_desc.  */
+  DRAIN_INPUT();
+  fclose (mm_stream);	
+  /* close (mm_desc); */
+
+  /* Do not try to close mm_desc again, later in the program.  */
+  mm_stream = NULL;
+  mm_desc = -1;
+
+#if defined (LOG_FILE)
+  if (ferror (log_file))
+    printf ("Error writing log file.\n");
+  if (fclose (log_file) != 0)
+    printf ("Error closing log file.\n");
+#endif
+
+  printf ("Ending remote debugging\n");
+} 
+
+/************************************************************* REMOTE_ATACH */
+/* Attach to a program that is already loaded and running 
+ * Upon exiting the process's execution is stopped.
+ */
+static void
+mm_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+
+  if (!mm_stream)
+      error ("MiniMon not opened yet, use the 'target minimon' command.\n");
+	
+  if (from_tty)
+      printf ("Attaching to remote program %s...\n", prog_name);
+
+  /* Make sure the target is currently running, it is supposed to be. */
+  /* FIXME: is it ok to send MiniMon a BREAK if it is already stopped in 
+   * 	the dbg core.  If so, we don't need to send this GO.
+   */
+  out_msg_buf->go_msg.code = GO;
+  out_msg_buf->go_msg.length = 0;
+  msg_send_serial(out_msg_buf);
+  sleep(2);	/* At the worst it will stop, receive a message, continue */
+ 
+  /* Send the mm a break. */ 
+  out_msg_buf->break_msg.code = BREAK;
+  out_msg_buf->break_msg.length = 0;
+  msg_send_serial(out_msg_buf);
+}
+/********************************************************** REMOTE_DETACH */
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  Leave remote process running (with no breakpoints set). */
+static void
+mm_detach (args,from_tty)
+     char *args;
+     int from_tty;
+{
+  remove_breakpoints();		/* Just in case there were any left in */
+  out_msg_buf->go_msg.code = GO;
+  out_msg_buf->go_msg.length = 0;
+  msg_send_serial(out_msg_buf);
+  pop_target();         	/* calls mm_close to do the real work */
+}
+
+
+/*************************************************************** REMOTE_RESUME
+** Tell the remote machine to resume.  */
+
+static void
+mm_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  if (sig != TARGET_SIGNAL_0)
+    warning ("Can't send signals to a remote MiniMon system.");
+
+  if (step) {
+      out_msg_buf->step_msg.code= STEP;
+      out_msg_buf->step_msg.length = 1*4;
+      out_msg_buf->step_msg.count = 1;		/* step 1 instruction */
+      msg_send_serial(out_msg_buf);
+  } else {
+      out_msg_buf->go_msg.code= GO;
+      out_msg_buf->go_msg.length = 0;
+      msg_send_serial(out_msg_buf);
+  }
+}
+
+/***************************************************************** REMOTE_WAIT
+** Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+static int
+mm_wait (status)
+     struct target_waitstatus *status;
+{
+  int i, result;
+  int old_timeout = timeout;
+  int old_immediate_quit = immediate_quit;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+/* wait for message to arrive. It should be:
+	- A HIF service request.
+	- A HIF exit service request.
+	- A CHANNEL0_ACK.
+	- A CHANNEL1 request.
+	- a debugcore HALT message.
+  HIF services must be responded too, and while-looping continued.
+  If the target stops executing, mm_wait() should return.
+*/
+  timeout = 0;	/* Wait indefinetly for a message */
+  immediate_quit = 1;   /* Helps ability to QUIT */
+  while(1)
+  {
+    while(msg_recv_serial(in_msg_buf)) {
+    	QUIT;	/* Let user quit if they want */
+    }
+    switch (in_msg_buf->halt_msg.code)
+    {
+    case HIF_CALL:
+	i = in_msg_buf->hif_call_rtn_msg.service_number;
+	result=service_HIF(in_msg_buf);
+   	if(i == 1) /* EXIT */
+	    goto exit;
+	if(result)
+	    printf("Warning: failure during HIF service %d\n", i);
+	break;
+    case CHANNEL0_ACK:
+	service_HIF(in_msg_buf);
+	break;
+    case CHANNEL1:
+        i=in_msg_buf->channel1_msg.length;
+        in_msg_buf->channel1_msg.data[i] = '\0';
+        printf("%s", in_msg_buf->channel1_msg.data);
+	gdb_flush(gdb_stdout);
+        /* Send CHANNEL1_ACK message */
+        out_msg_buf->channel1_ack_msg.code = CHANNEL1_ACK;
+        out_msg_buf->channel1_ack_msg.length = 0;
+        result = msg_send_serial(out_msg_buf);
+	break;
+    case HALT:
+	goto halted;
+    default:
+	goto halted;
+    }
+  }
+halted:
+  /* FIXME, these printfs should not be here.  This is a source level 
+     debugger, guys!  */
+  if (in_msg_buf->halt_msg.trap_number== 0)
+  { printf("Am290*0 received vector number %d (break point)\n",
+	in_msg_buf->halt_msg.trap_number);
+    status->kind = TARGET_WAITKIND_STOPPED;
+    status->value.sig = TARGET_SIGNAL_TRAP;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 1)
+    {
+      printf("Am290*0 received vector number %d\n",
+	     in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_BUS;
+    }
+  else if (in_msg_buf->halt_msg.trap_number== 3
+        || in_msg_buf->halt_msg.trap_number== 4)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_FPE;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 5)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_ILL;
+  }
+  else if (in_msg_buf->halt_msg.trap_number >= 6
+        && in_msg_buf->halt_msg.trap_number <= 11)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_SEGV;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 12
+        || in_msg_buf->halt_msg.trap_number== 13)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_ILL;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 14)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_ALRM;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 15)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+    }
+  else if (in_msg_buf->halt_msg.trap_number >= 16
+        && in_msg_buf->halt_msg.trap_number <= 21)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_INT;
+  }
+  else if (in_msg_buf->halt_msg.trap_number== 22)
+  { printf("Am290*0 received vector number %d\n",
+	in_msg_buf->halt_msg.trap_number);
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_ILL;
+  } /* BREAK message was sent */
+  else if (in_msg_buf->halt_msg.trap_number== 75)
+    {
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+    }
+  else
+exit:
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = 0;
+    }
+
+  timeout = old_timeout;	/* Restore original timeout value */
+  immediate_quit = old_immediate_quit;
+  return 0;
+}
+
+/******************************************************* REMOTE_FETCH_REGISTERS
+ * Read a remote register 'regno'. 
+ * If regno==-1 then read all the registers.
+ */
+static void 
+mm_fetch_registers (regno)
+int	regno;
+{
+  INT32 *data_p;
+
+  if (regno >= 0)  {
+	fetch_register(regno);
+	return;
+  }
+
+/* Gr1/rsp */
+  out_msg_buf->read_req_msg.byte_count = 4*1;
+  out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+  out_msg_buf->read_req_msg.address = 1;
+  msg_send_serial(out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+  supply_register (GR1_REGNUM , data_p);
+
+#if defined(GR64_REGNUM)	/* Read gr64-127 */
+/* Global Registers gr64-gr95 */ 
+  out_msg_buf->read_req_msg.code= READ_REQ;
+  out_msg_buf->read_req_msg.length = 4*3;
+  out_msg_buf->read_req_msg.byte_count = 4*32;
+  out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+  out_msg_buf->read_req_msg.address = 64;
+  msg_send_serial(out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+
+  for (regno=GR64_REGNUM; regno<GR64_REGNUM+32; regno++) {
+      supply_register (regno, data_p++);
+  }
+#endif	/*  GR64_REGNUM */
+
+/* Global Registers gr96-gr127 */ 
+  out_msg_buf->read_req_msg.code= READ_REQ;
+  out_msg_buf->read_req_msg.length = 4*3;
+  out_msg_buf->read_req_msg.byte_count = 4 * 32;
+  out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+  out_msg_buf->read_req_msg.address = 96;
+  msg_send_serial(out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+
+  for (regno=GR96_REGNUM; regno<GR96_REGNUM+32; regno++) {
+      supply_register (regno, data_p++);
+  }
+
+/* Local Registers */ 
+  out_msg_buf->read_req_msg.byte_count = 4 * (128);
+  out_msg_buf->read_req_msg.memory_space = LOCAL_REG;
+  out_msg_buf->read_req_msg.address = 0;
+  msg_send_serial(out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+
+  for (regno=LR0_REGNUM; regno<LR0_REGNUM+128; regno++) {
+      supply_register (regno, data_p++);
+  }
+
+/* Protected Special Registers */ 
+  out_msg_buf->read_req_msg.byte_count = 4*15;
+  out_msg_buf->read_req_msg.memory_space = SPECIAL_REG;
+  out_msg_buf->read_req_msg.address = 0;
+  msg_send_serial( out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+
+  for (regno=0; regno<=14; regno++) {
+      supply_register (SR_REGNUM(regno), data_p++);
+  }
+  if (USE_SHADOW_PC) {	/* Let regno_to_srnum() handle the register number */
+	fetch_register(NPC_REGNUM);
+	fetch_register(PC_REGNUM);
+	fetch_register(PC2_REGNUM);
+  }
+
+/* Unprotected Special Registers */ 
+  out_msg_buf->read_req_msg.byte_count = 4*8;
+  out_msg_buf->read_req_msg.memory_space = SPECIAL_REG;
+  out_msg_buf->read_req_msg.address = 128;
+  msg_send_serial( out_msg_buf);
+  expect_msg(READ_ACK,in_msg_buf,1);
+  data_p = &(in_msg_buf->read_r_ack_msg.data[0]);
+
+  for (regno=128; regno<=135; regno++) {
+      supply_register (SR_REGNUM(regno), data_p++);
+  }
+
+  /* There doesn't seem to be any way to get these.  */
+  {
+    int val = -1;
+    supply_register (FPE_REGNUM, &val);
+    supply_register (INTE_REGNUM, &val);
+    supply_register (FPS_REGNUM, &val);
+    supply_register (EXO_REGNUM, &val);
+  }
+}
+
+
+/****************************************************** REMOTE_STORE_REGISTERS
+ * Store register regno into the target.  
+ * If regno==-1 then store all the registers.
+ * Result is 0 for success, -1 for failure.
+ */
+
+static void
+mm_store_registers (regno)
+int regno;
+{
+  int result;
+  
+  if (regno >= 0) {
+    store_register(regno);
+    return;
+  }
+
+  result = 0;
+
+  out_msg_buf->write_r_msg.code= WRITE_REQ;
+
+/* Gr1/rsp */
+  out_msg_buf->write_r_msg.byte_count = 4*1;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.memory_space = GLOBAL_REG;
+  out_msg_buf->write_r_msg.address = 1;
+  out_msg_buf->write_r_msg.data[0] = read_register (GR1_REGNUM);
+
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+#if defined(GR64_REGNUM)
+/* Global registers gr64-gr95 */
+  out_msg_buf->write_r_msg.byte_count = 4* (32);
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 64;
+
+  for (regno=GR64_REGNUM ; regno<GR64_REGNUM+32 ; regno++)
+    {
+      out_msg_buf->write_r_msg.data[regno-GR64_REGNUM] = read_register (regno);
+    }
+  msg_send_serial(out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+#endif	/* GR64_REGNUM */
+
+/* Global registers gr96-gr127 */
+  out_msg_buf->write_r_msg.byte_count = 4* (32);
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 96;
+  for (regno=GR96_REGNUM ; regno<GR96_REGNUM+32 ; regno++)
+    {
+      out_msg_buf->write_r_msg.data[regno-GR96_REGNUM] = read_register (regno);
+    }
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+/* Local Registers */
+  out_msg_buf->write_r_msg.memory_space = LOCAL_REG;
+  out_msg_buf->write_r_msg.byte_count = 4*128;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 0;
+
+  for (regno = LR0_REGNUM ; regno < LR0_REGNUM+128 ; regno++)
+    {
+      out_msg_buf->write_r_msg.data[regno-LR0_REGNUM] = read_register (regno);
+    }
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+/* Protected Special Registers */ 
+  /* VAB through TMR */
+  out_msg_buf->write_r_msg.memory_space = SPECIAL_REG;
+  out_msg_buf->write_r_msg.byte_count = 4* 10;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 0;
+  for (regno = 0 ; regno<=9 ; regno++)	/* VAB through TMR */
+    out_msg_buf->write_r_msg.data[regno] = read_register (SR_REGNUM(regno));
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+  /* PC0, PC1, PC2 possibly as shadow registers */
+  out_msg_buf->write_r_msg.byte_count = 4* 3;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  for (regno=10 ; regno<=12 ; regno++)	/* LRU and MMU */
+    out_msg_buf->write_r_msg.data[regno-10] = read_register (SR_REGNUM(regno));
+  if (USE_SHADOW_PC) 
+    out_msg_buf->write_r_msg.address = 20;	/* SPC0 */
+  else 
+    out_msg_buf->write_r_msg.address = 10;	/* PC0 */
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+  /* LRU and MMU */
+  out_msg_buf->write_r_msg.byte_count = 4* 2;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 13;
+  for (regno=13 ; regno<=14 ; regno++)	/* LRU and MMU */
+    out_msg_buf->write_r_msg.data[regno-13] = read_register (SR_REGNUM(regno));
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+
+/* Unprotected Special Registers */ 
+  out_msg_buf->write_r_msg.byte_count = 4*8;
+  out_msg_buf->write_r_msg.length = 3*4 + out_msg_buf->write_r_msg.byte_count;
+  out_msg_buf->write_r_msg.address = 128;
+  for (regno = 128 ; regno<=135 ; regno++)
+    out_msg_buf->write_r_msg.data[regno-128] = read_register(SR_REGNUM(regno));
+  msg_send_serial( out_msg_buf);
+  if (!expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = -1;
+  }
+ 
+  registers_changed ();
+}
+
+/*************************************************** REMOTE_PREPARE_TO_STORE */
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+mm_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+/******************************************************* REMOTE_XFER_MEMORY */
+static CORE_ADDR
+translate_addr(addr)
+CORE_ADDR addr;
+{
+#if defined(KERNEL_DEBUGGING)
+        /* Check for a virtual address in the kernel */
+        /* Assume physical address of ublock is in  paddr_u register */
+	/* FIXME: doesn't work for user virtual addresses */
+        if (addr >= UVADDR) {
+                /* PADDR_U register holds the physical address of the ublock */
+                CORE_ADDR i = (CORE_ADDR)read_register(PADDR_U_REGNUM);
+                return(i + addr - (CORE_ADDR)UVADDR);
+        } else {
+        	return(addr);
+        }
+#else
+        return(addr);
+#endif
+}
+
+/******************************************************* REMOTE_FILES_INFO */
+static void
+mm_files_info ()
+{
+  printf ("\tAttached to %s at %d baud and running program %s.\n",
+          dev_name, baudrate, prog_name);
+}
+
+/************************************************* REMOTE_INSERT_BREAKPOINT */
+static int
+mm_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  out_msg_buf->bkpt_set_msg.code = BKPT_SET;
+  out_msg_buf->bkpt_set_msg.length = 4*4;
+  out_msg_buf->bkpt_set_msg.memory_space = I_MEM;
+  out_msg_buf->bkpt_set_msg.bkpt_addr = (ADDR32) addr;
+  out_msg_buf->bkpt_set_msg.pass_count = 1;
+  out_msg_buf->bkpt_set_msg.bkpt_type = -1;	/* use illop for 29000 */
+  msg_send_serial( out_msg_buf);
+  if (expect_msg(BKPT_SET_ACK,in_msg_buf,1)) {
+	return 0;		/* Success */
+  } else {
+	return 1;		/* Failure */
+  }
+}
+
+/************************************************* REMOTE_DELETE_BREAKPOINT */
+static int
+mm_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  out_msg_buf->bkpt_rm_msg.code = BKPT_RM;
+  out_msg_buf->bkpt_rm_msg.length = 4*3;
+  out_msg_buf->bkpt_rm_msg.memory_space = I_MEM;
+  out_msg_buf->bkpt_rm_msg.bkpt_addr = (ADDR32) addr;
+  msg_send_serial( out_msg_buf);
+  if (expect_msg(BKPT_RM_ACK,in_msg_buf,1)) {
+	return 0;		/* Success */
+  } else {
+	return 1;		/* Failure */
+  }
+}
+
+
+/******************************************************* REMOTE_KILL */
+static void
+mm_kill(arg,from_tty)
+char    *arg;
+int     from_tty;
+{
+	char	buf[4];
+
+#if defined(KERNEL_DEBUGGING)
+	/* We don't ever kill the kernel */
+	if (from_tty) {
+		printf("Kernel not killed, but left in current state.\n");
+	 	printf("Use detach to leave kernel running.\n");
+	}
+#else
+  	out_msg_buf->break_msg.code = BREAK;
+  	out_msg_buf->bkpt_set_msg.length = 4*0;
+	expect_msg(HALT,in_msg_buf,from_tty);
+	if (from_tty) {
+		printf("Target has been stopped.");
+		printf("Would you like to do a hardware reset (y/n) [n] ");
+		fgets(buf,3,stdin);	
+		if (buf[0] == 'y') {
+			out_msg_buf->reset_msg.code = RESET;
+			out_msg_buf->bkpt_set_msg.length = 4*0;
+			expect_msg(RESET_ACK,in_msg_buf,from_tty);
+			printf("Target has been reset.");
+		}
+	}
+	pop_target();
+#endif 
+}
+
+
+
+/***************************************************************************/
+/* 
+ * Load a program into the target.
+ */
+static void
+mm_load(arg_string,from_tty)
+char	*arg_string;
+int	from_tty;
+{
+  dont_repeat ();
+
+#if defined(KERNEL_DEBUGGING)
+  printf("The kernel had better be loaded already!  Loading not done.\n");
+#else
+  if (arg_string == 0)
+    error ("The load command takes a file name");
+
+  arg_string = tilde_expand (arg_string);
+  make_cleanup (free, arg_string);
+  QUIT;
+  immediate_quit++;
+  error("File loading is not yet supported for MiniMon.");
+  /* FIXME, code to load your file here... */
+  /* You may need to do an init_target_mm() */
+  /* init_target_mm(?,?,?,?,?,?,?,?); */
+  immediate_quit--;
+  /* symbol_file_add (arg_string, from_tty, text_addr, 0, 0, 0, 0); */
+#endif
+
+}
+
+/************************************************ REMOTE_WRITE_INFERIOR_MEMORY
+** Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns number of bytes written.  */
+static int
+mm_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i,nwritten;
+
+  out_msg_buf->write_req_msg.code= WRITE_REQ;
+  out_msg_buf->write_req_msg.memory_space = mm_memory_space(memaddr);	
+
+  nwritten=0;
+  while (nwritten < len) {
+	int num_to_write = len - nwritten;
+	if (num_to_write > MAXDATA) num_to_write = MAXDATA;
+  	for (i=0 ; i < num_to_write ; i++)
+      		out_msg_buf->write_req_msg.data[i] = myaddr[i+nwritten];
+  	out_msg_buf->write_req_msg.byte_count = num_to_write;
+  	out_msg_buf->write_req_msg.length = 3*4 + num_to_write; 
+  	out_msg_buf->write_req_msg.address = memaddr + nwritten;
+  	msg_send_serial(out_msg_buf);
+
+  	if (expect_msg(WRITE_ACK,in_msg_buf,1)) {
+  		nwritten += in_msg_buf->write_ack_msg.byte_count;
+  	} else {
+		break;	
+  	}
+  }
+  return(nwritten);
+}
+
+/************************************************* REMOTE_READ_INFERIOR_MEMORY
+** Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns number of bytes read.  */
+static int
+mm_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i,nread;
+
+  out_msg_buf->read_req_msg.code= READ_REQ;
+  out_msg_buf->read_req_msg.memory_space = mm_memory_space(memaddr);
+
+  nread=0;
+  while (nread < len) {
+	int num_to_read = (len - nread);
+	if (num_to_read > MAXDATA) num_to_read = MAXDATA;
+  	out_msg_buf->read_req_msg.byte_count = num_to_read; 
+  	out_msg_buf->read_req_msg.length = 3*4 + num_to_read; 
+  	out_msg_buf->read_req_msg.address = memaddr + nread;
+  	msg_send_serial(out_msg_buf);
+
+  	if (expect_msg(READ_ACK,in_msg_buf,1)) {
+  		for (i=0 ; i<in_msg_buf->read_ack_msg.byte_count ; i++)
+      			myaddr[i+nread] = in_msg_buf->read_ack_msg.data[i];
+  		nread += in_msg_buf->read_ack_msg.byte_count;
+  	} else {
+		break;	
+  	}
+  }
+  return(nread);
+}
+
+/* FIXME!  Merge these two.  */
+static int
+mm_xfer_inferior_memory (memaddr, myaddr, len, write)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+{
+
+  memaddr = translate_addr(memaddr);
+
+  if (write)
+    return mm_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return mm_read_inferior_memory (memaddr, myaddr, len);
+}
+
+
+/********************************************************** MSG_SEND_SERIAL
+** This function is used to send a message over the
+** serial line.
+**
+** If the message is successfully sent, a zero is
+** returned.  If the message was not sendable, a -1
+** is returned.  This function blocks.  That is, it
+** does not return until the message is completely
+** sent, or until an error is encountered.
+**
+*/
+
+int
+msg_send_serial(msg_ptr)
+   union  msg_t  *msg_ptr;
+{
+   INT32  message_size;
+   int    byte_count;
+   int    result;
+   char   c;
+
+   /* Send message header */
+   byte_count = 0;
+   message_size = msg_ptr->generic_msg.length + (2 * sizeof(INT32));
+   do {
+      c = *((char *)msg_ptr+byte_count);
+      result = write(mm_desc, &c, 1);
+      if (result == 1) {
+         byte_count = byte_count + 1;
+      }
+   } while ((byte_count < message_size) );
+
+   return(0);
+}  /* end msg_send_serial() */
+
+/********************************************************** MSG_RECV_SERIAL
+** This function is used to receive a message over a
+** serial line.
+**
+** If the message is waiting in the buffer, a zero is
+** returned and the buffer pointed to by msg_ptr is filled
+** in.  If no message was available, a -1 is returned.
+** If timeout==0, wait indefinetly for a character.
+**
+*/
+
+int
+msg_recv_serial(msg_ptr)
+union  msg_t  *msg_ptr;
+{
+   static INT32  length=0;
+   static INT32  byte_count=0;
+   int    result;
+   char   c;
+  if(msg_ptr == 0)		/* re-sync request */
+  {  length=0;
+     byte_count=0;
+#ifdef HAVE_TERMIO
+     /* The timeout here is the prevailing timeout set with VTIME */
+     ->"timeout==0 semantics not supported"
+     read(mm_desc, in_buf, BUFER_SIZE);
+#else
+     alarm (1);
+     read(mm_desc, in_buf, BUFER_SIZE);
+     alarm (0);
+#endif
+     return(0);
+  }
+   /* Receive message */
+#ifdef HAVE_TERMIO
+/* Timeout==0, help support the mm_wait() routine */
+   ->"timeout==0 semantics not supported (and its nice if they are)"
+   result = read(mm_desc, &c, 1);
+#else
+  alarm(timeout);
+  result = read(mm_desc, &c, 1);
+  alarm (0);
+#endif
+  if ( result < 0) {
+      if (errno == EINTR) {
+      	error ("Timeout reading from remote system.");
+      } else
+	perror_with_name ("remote");
+  } else if (result == 1) {
+      *((char *)msg_ptr+byte_count) = c;
+      byte_count = byte_count + 1;
+  }
+
+   /* Message header received.  Save message length. */
+  if (byte_count == (2 * sizeof(INT32)))
+      length = msg_ptr->generic_msg.length;
+
+  if (byte_count >= (length + (2 * sizeof(INT32)))) {
+      /* Message received */
+      byte_count = 0;
+      return(0);
+  } else
+      return (-1);
+
+}  /* end msg_recv_serial() */
+
+/********************************************************************* KBD_RAW
+** This function is used to put the keyboard in "raw"
+** mode for BSD Unix.  The original status is saved
+** so that it may be restored later.
+*/
+TERMINAL kbd_tbuf;
+
+int
+kbd_raw() {
+   int    result;
+   TERMINAL tbuf;
+
+   /* Get keyboard termio (to save to restore original modes) */
+#ifdef HAVE_TERMIO
+   result = ioctl(0, TCGETA, &kbd_tbuf);
+#else
+   result = ioctl(0, TIOCGETP, &kbd_tbuf);
+#endif
+   if (result == -1)
+      return (errno);
+
+   /* Get keyboard TERMINAL (for modification) */
+#ifdef HAVE_TERMIO
+   result = ioctl(0, TCGETA, &tbuf);
+#else
+   result = ioctl(0, TIOCGETP, &tbuf);
+#endif
+   if (result == -1)
+      return (errno);
+
+   /* Set up new parameters */
+#ifdef HAVE_TERMIO
+   tbuf.c_iflag = tbuf.c_iflag &
+      ~(INLCR | ICRNL | IUCLC | ISTRIP | IXON | BRKINT);
+   tbuf.c_lflag = tbuf.c_lflag & ~(ICANON | ISIG | ECHO);
+   tbuf.c_cc[4] = 0;  /* MIN */
+   tbuf.c_cc[5] = 0;  /* TIME */
+#else
+   /* FIXME: not sure if this is correct (matches HAVE_TERMIO). */
+   tbuf.sg_flags |= RAW;
+   tbuf.sg_flags |= ANYP;
+   tbuf.sg_flags &= ~ECHO;
+#endif
+
+   /* Set keyboard termio to new mode (RAW) */
+#ifdef HAVE_TERMIO
+   result = ioctl(0, TCSETAF, &tbuf);
+#else
+   result = ioctl(0, TIOCSETP, &tbuf);
+#endif 
+   if (result == -1)
+      return (errno);
+
+   return (0);
+}  /* end kbd_raw() */
+
+
+
+/***************************************************************** KBD_RESTORE
+** This function is used to put the keyboard back in the
+** mode it was in before kbk_raw was called.  Note that
+** kbk_raw() must have been called at least once before
+** kbd_restore() is called.
+*/
+
+int
+kbd_restore() {
+   int result;
+
+   /* Set keyboard termio to original mode */
+#ifdef HAVE_TERMIO
+   result = ioctl(0, TCSETAF, &kbd_tbuf);
+#else
+   result = ioctl(0, TIOCGETP, &kbd_tbuf);
+#endif
+
+   if (result == -1)
+      return (errno);
+
+   return(0);
+}  /* end kbd_cooked() */
+
+
+/*****************************************************************************/ 
+/* Fetch a single register indicatated by 'regno'. 
+ * Returns 0/-1 on success/failure.  
+ */
+static int
+fetch_register (regno)
+     int regno;
+{
+     int  result;
+  out_msg_buf->read_req_msg.code= READ_REQ;
+  out_msg_buf->read_req_msg.length = 4*3;
+  out_msg_buf->read_req_msg.byte_count = 4;
+
+  if (regno == GR1_REGNUM)
+  { out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->read_req_msg.address = 1;
+  }
+  else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
+  { out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->read_req_msg.address = (regno - GR96_REGNUM) + 96;
+  }
+#if defined(GR64_REGNUM)
+  else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
+  { out_msg_buf->read_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->read_req_msg.address = (regno - GR64_REGNUM) + 64;
+  }
+#endif	/* GR64_REGNUM */
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+  { out_msg_buf->read_req_msg.memory_space = LOCAL_REG;
+    out_msg_buf->read_req_msg.address = (regno - LR0_REGNUM);
+  }
+  else if (regno>=FPE_REGNUM && regno<=EXO_REGNUM)  
+  { int val = -1;
+    supply_register(160 + (regno - FPE_REGNUM),&val);
+    return 0;		/* Pretend Success */
+  }
+  else 
+  { out_msg_buf->read_req_msg.memory_space = SPECIAL_REG;
+    out_msg_buf->read_req_msg.address = regnum_to_srnum(regno); 
+  } 
+
+  msg_send_serial(out_msg_buf);
+
+  if (expect_msg(READ_ACK,in_msg_buf,1)) {
+  	supply_register (regno, &(in_msg_buf->read_r_ack_msg.data[0]));
+	result = 0;
+  } else {
+	result = -1;
+  }
+  return result;
+}
+/*****************************************************************************/ 
+/* Store a single register indicated by 'regno'. 
+ * Returns 0/-1 on success/failure.  
+ */
+static int
+store_register (regno)
+     int regno;
+{
+     int  result;
+
+  out_msg_buf->write_req_msg.code= WRITE_REQ;
+  out_msg_buf->write_req_msg.length = 4*4;
+  out_msg_buf->write_req_msg.byte_count = 4;
+  out_msg_buf->write_r_msg.data[0] = read_register (regno);
+
+  if (regno == GR1_REGNUM)
+  { out_msg_buf->write_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->write_req_msg.address = 1;
+    /* Setting GR1 changes the numbers of all the locals, so invalidate the 
+     * register cache.  Do this *after* calling read_register, because we want 
+     * read_register to return the value that write_register has just stuffed 
+     * into the registers array, not the value of the register fetched from 
+     * the inferior.  
+     */
+    registers_changed ();
+  }
+#if defined(GR64_REGNUM)
+  else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
+  { out_msg_buf->write_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->write_req_msg.address = (regno - GR64_REGNUM) + 64;
+  }
+#endif	/* GR64_REGNUM */
+  else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
+  { out_msg_buf->write_req_msg.memory_space = GLOBAL_REG;
+    out_msg_buf->write_req_msg.address = (regno - GR96_REGNUM) + 96;
+  }
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+  { out_msg_buf->write_req_msg.memory_space = LOCAL_REG;
+    out_msg_buf->write_req_msg.address = (regno - LR0_REGNUM);
+  }
+  else if (regno>=FPE_REGNUM && regno<=EXO_REGNUM)  
+  { 
+    return 0;		/* Pretend Success */
+  }
+  else 	/* An unprotected or protected special register */
+  { out_msg_buf->write_req_msg.memory_space = SPECIAL_REG;
+    out_msg_buf->write_req_msg.address = regnum_to_srnum(regno); 
+  } 
+
+  msg_send_serial(out_msg_buf);
+
+  if (expect_msg(WRITE_ACK,in_msg_buf,1)) {
+	result = 0;
+  } else {
+	result = -1;
+  }
+  return result;
+}
+/****************************************************************************/
+/* 
+ * Convert a gdb special register number to a 29000 special register number.
+ */
+static int
+regnum_to_srnum(regno)
+int	regno;
+{
+	switch(regno) {
+		case VAB_REGNUM: return(0); 
+		case OPS_REGNUM: return(1); 
+		case CPS_REGNUM: return(2); 
+		case CFG_REGNUM: return(3); 
+		case CHA_REGNUM: return(4); 
+		case CHD_REGNUM: return(5); 
+		case CHC_REGNUM: return(6); 
+		case RBP_REGNUM: return(7); 
+		case TMC_REGNUM: return(8); 
+		case TMR_REGNUM: return(9); 
+		case NPC_REGNUM: return(USE_SHADOW_PC ? (20) : (10));
+		case PC_REGNUM:  return(USE_SHADOW_PC ? (21) : (11));
+		case PC2_REGNUM: return(USE_SHADOW_PC ? (22) : (12));
+		case MMU_REGNUM: return(13); 
+		case LRU_REGNUM: return(14); 
+		case IPC_REGNUM: return(128); 
+		case IPA_REGNUM: return(129); 
+		case IPB_REGNUM: return(130); 
+		case Q_REGNUM:   return(131); 
+		case ALU_REGNUM: return(132); 
+		case BP_REGNUM:  return(133); 
+		case FC_REGNUM:  return(134); 
+		case CR_REGNUM:  return(135); 
+		case FPE_REGNUM: return(160); 
+		case INTE_REGNUM: return(161); 
+		case FPS_REGNUM: return(162); 
+		case EXO_REGNUM:return(164); 
+		default:
+			return(255);	/* Failure ? */
+	}
+}
+/****************************************************************************/
+/* 
+ * Initialize the target debugger (minimon only).
+ */
+static void
+init_target_mm(tstart,tend,dstart,dend,entry,ms_size,rs_size,arg_start)
+ADDR32	tstart,tend,dstart,dend,entry;
+INT32	ms_size,rs_size;
+ADDR32	arg_start;
+{
+	out_msg_buf->init_msg.code = INIT;
+	out_msg_buf->init_msg.length= sizeof(struct init_msg_t)-2*sizeof(INT32);
+	out_msg_buf->init_msg.text_start = tstart;
+	out_msg_buf->init_msg.text_end = tend;
+	out_msg_buf->init_msg.data_start = dstart;
+	out_msg_buf->init_msg.data_end = dend;
+	out_msg_buf->init_msg.entry_point = entry;
+	out_msg_buf->init_msg.mem_stack_size = ms_size;
+	out_msg_buf->init_msg.reg_stack_size = rs_size;
+	out_msg_buf->init_msg.arg_start = arg_start;
+	msg_send_serial(out_msg_buf);
+	expect_msg(INIT_ACK,in_msg_buf,1);
+}
+/****************************************************************************/
+/* 
+ * Return a pointer to a string representing the given message code.
+ * Not all messages are represented here, only the ones that we expect
+ * to be called with.
+ */
+static char*
+msg_str(code)
+INT32	code;
+{
+	static char cbuf[32];
+
+	switch (code) {
+	case BKPT_SET_ACK: sprintf(cbuf,"%s (%d)","BKPT_SET_ACK",code); break; 
+	case BKPT_RM_ACK: sprintf(cbuf,"%s (%d)","BKPT_RM_ACK",code); break; 
+	case INIT_ACK: 	  sprintf(cbuf,"%s (%d)","INIT_ACK",code); break; 
+	case READ_ACK: 	  sprintf(cbuf,"%s (%d)","READ_ACK",code); break; 
+	case WRITE_ACK:	  sprintf(cbuf,"%s (%d)","WRITE_ACK",code); break; 
+	case ERROR:       sprintf(cbuf,"%s (%d)","ERROR",code); break; 
+	case HALT: 	sprintf(cbuf,"%s (%d)","HALT",code); break; 
+	default:	sprintf(cbuf,"UNKNOWN (%d)",code); break; 
+	}
+	return(cbuf);
+}
+/****************************************************************************/
+/*
+ * Selected (not all of them) error codes that we might get.
+ */
+static char* 
+error_msg_str(code)
+INT32	code;
+{
+	static char cbuf[50];
+
+	switch (code) {
+	case EMFAIL: 	return("EMFAIL: unrecoverable error"); 
+	case EMBADADDR: return("EMBADADDR: Illegal address"); 
+	case EMBADREG: 	return("EMBADREG: Illegal register "); 
+	case EMACCESS: 	return("EMACCESS: Could not access memory");
+	case EMBADMSG: 	return("EMBADMSG: Unknown message type"); 
+	case EMMSG2BIG: return("EMMSG2BIG: Message to large"); 
+	case EMNOSEND: 	return("EMNOSEND: Could not send message"); 
+	case EMNORECV: 	return("EMNORECV: Could not recv message"); 
+	case EMRESET: 	return("EMRESET: Could not RESET target"); 
+	case EMCONFIG: 	return("EMCONFIG: Could not get target CONFIG"); 
+	case EMSTATUS: 	return("EMSTATUS: Could not get target STATUS"); 
+	case EMREAD: 	return("EMREAD: Could not READ target memory"); 
+	case EMWRITE: 	return("EMWRITE: Could not WRITE target memory"); 
+	case EMBKPTSET: return("EMBKPTSET: Could not set breakpoint"); 
+	case EMBKPTRM:	return("EMBKPTRM: Could not remove breakpoint"); 
+	case EMBKPTSTAT:return("EMBKPTSTAT: Could not get breakpoint status"); 
+	case EMBKPTNONE:return("EMBKPTNONE: All breakpoints in use"); 
+	case EMBKPTUSED:return("EMBKPTUSED: Breakpoints already in use"); 
+	case EMINIT: 	return("EMINIT: Could not init target memory"); 
+	case EMGO: 	return("EMGO: Could not start execution"); 
+	case EMSTEP: 	return("EMSTEP: Could not single step"); 
+	case EMBREAK: 	return("EMBREAK: Could not BREAK"); 
+	case EMCOMMERR: return("EMCOMMERR: Communication error"); 
+	default:     	sprintf(cbuf,"error number %d",code); break;
+	} /* end switch */
+
+	return (cbuf);
+}
+/****************************************************************************/
+/* 
+ *  Receive a message and expect it to be of type msgcode.
+ *  Returns 0/1 on failure/success.
+ */
+static int
+expect_msg(msgcode,msg_buf,from_tty)
+INT32	msgcode;		/* Msg code we expect */
+union msg_t *msg_buf;		/* Where to put  the message received */
+int	from_tty;		/* Print message on error if non-zero */
+{
+  int	retries=0;
+  while(msg_recv_serial(msg_buf) && (retries++<MAX_RETRIES)); 
+  if (retries >= MAX_RETRIES) {
+	printf("Expected msg %s, ",msg_str(msgcode));
+	printf("no message received!\n");
+        return(0);		/* Failure */
+  }
+
+  if (msg_buf->generic_msg.code != msgcode) {
+     if (from_tty) {
+	printf("Expected msg %s, ",msg_str(msgcode));
+	printf("got msg %s\n",msg_str(msg_buf->generic_msg.code));
+        if (msg_buf->generic_msg.code == ERROR) 
+		printf("%s\n",error_msg_str(msg_buf->error_msg.error_code));
+     }
+     return(0);			/* Failure */
+  }
+  return(1);			/* Success */
+}	
+/****************************************************************************/
+/*
+ * Determine the MiniMon memory space qualifier based on the addr. 
+ * FIXME: Can't distinguis I_ROM/D_ROM.  
+ * FIXME: Doesn't know anything about I_CACHE/D_CACHE.
+ */
+static int
+mm_memory_space(addr)
+CORE_ADDR	*addr;
+{
+	ADDR32 tstart = target_config.I_mem_start;
+	ADDR32 tend   = tstart + target_config.I_mem_size;  
+	ADDR32 dstart = target_config.D_mem_start;
+	ADDR32 dend   = tstart + target_config.D_mem_size;  
+	ADDR32 rstart = target_config.ROM_start;
+	ADDR32 rend   = tstart + target_config.ROM_size;  
+
+	if (((ADDR32)addr >= tstart) && ((ADDR32)addr < tend)) { 
+		return I_MEM;
+	} else if (((ADDR32)addr >= dstart) && ((ADDR32)addr < dend)) { 
+		return D_MEM;
+	} else if (((ADDR32)addr >= rstart) && ((ADDR32)addr < rend)) {
+		/* FIXME: how do we determine between D_ROM and I_ROM */
+		return D_ROM;
+	} else	/* FIXME: what do me do now? */
+		return D_MEM;	/* Hmmm! */
+}
+
+/****************************************************************************/
+/* 
+ *  Define the target subroutine names
+ */
+struct target_ops mm_ops ;
+
+static void 
+init_mm_ops(void)
+{
+  mm_ops.to_shortname =   "minimon";
+  mm_ops.to_longname =   "Remote AMD/Minimon target";
+  mm_ops.to_doc =   "Remote debug an AMD 290*0 using the MiniMon dbg core on the target";
+  mm_ops.to_open =   mm_open;
+  mm_ops.to_close =   mm_close;
+  mm_ops.to_attach =   mm_attach;
+  mm_ops.to_post_attach = NULL;
+  mm_ops.to_require_attach = NULL;
+  mm_ops.to_detach =   mm_detach;
+  mm_ops.to_require_detach = NULL;
+  mm_ops.to_resume =   mm_resume;
+  mm_ops.to_wait  =   mm_wait;
+  mm_ops.to_post_wait = NULL;
+  mm_ops.to_fetch_registers  =   mm_fetch_registers;
+  mm_ops.to_store_registers  =   mm_store_registers;
+  mm_ops.to_prepare_to_store =   mm_prepare_to_store;
+  mm_ops.to_xfer_memory  =   mm_xfer_inferior_memory;
+  mm_ops.to_files_info  =   mm_files_info;
+  mm_ops.to_insert_breakpoint =   mm_insert_breakpoint;
+  mm_ops.to_remove_breakpoint =   mm_remove_breakpoint;
+  mm_ops.to_terminal_init  =   0;
+  mm_ops.to_terminal_inferior =   0;
+  mm_ops.to_terminal_ours_for_output =   0;
+  mm_ops.to_terminal_ours  =   0;
+  mm_ops.to_terminal_info  =   0;        
+  mm_ops.to_kill  =   mm_kill;           
+  mm_ops.to_load  =   mm_load;
+  mm_ops.to_lookup_symbol =   0;           
+  mm_ops.to_create_inferior =   mm_create_inferior;
+  mm_ops.to_post_startup_inferior = NULL;
+  mm_ops.to_acknowledge_created_inferior = NULL;
+  mm_ops.to_clone_and_follow_inferior = NULL;
+  mm_ops.to_post_follow_inferior_by_clone = NULL;
+  mm_ops.to_insert_fork_catchpoint = NULL;
+  mm_ops.to_remove_fork_catchpoint = NULL;
+  mm_ops.to_insert_vfork_catchpoint = NULL;
+  mm_ops.to_remove_vfork_catchpoint = NULL;
+  mm_ops.to_has_forked = NULL;
+  mm_ops.to_has_vforked = NULL;
+  mm_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  mm_ops.to_post_follow_vfork = NULL; 
+  mm_ops.to_insert_exec_catchpoint = NULL;
+  mm_ops.to_remove_exec_catchpoint = NULL;
+  mm_ops.to_has_execd = NULL;
+  mm_ops.to_reported_exec_events_per_exec_call = NULL;
+  mm_ops.to_has_exited = NULL;
+  mm_ops.to_mourn_inferior =   mm_mourn; 
+  mm_ops.to_can_run  =   0;	
+  mm_ops.to_notice_signals =   0;
+  mm_ops.to_thread_alive  =   0;
+  mm_ops.to_stop  =   0;		
+  mm_ops.to_pid_to_exec_file = NULL;
+  mm_ops.to_core_file_to_sym_file = NULL;
+  mm_ops.to_stratum =   process_stratum;
+  mm_ops.DONT_USE =   0; 
+  mm_ops.to_has_all_memory =   1;
+  mm_ops.to_has_memory =   1;
+  mm_ops.to_has_stack =   1;
+  mm_ops.to_has_registers =   1;
+  mm_ops.to_has_execution =   1; 
+  mm_ops.to_sections =   0;
+  mm_ops.to_sections_end =   0;	
+  mm_ops.to_magic =   OPS_MAGIC;    
+};
+
+void
+_initialize_remote_mm()
+{
+  init_mm_ops() ;
+  add_target (&mm_ops);
+}
+
+#ifdef NO_HIF_SUPPORT
+service_HIF(msg)
+union msg_t	*msg;
+{
+	return(0);	/* Emulate a failure */
+}
+#endif
diff --git a/gdb/remote-nindy.c b/gdb/remote-nindy.c
new file mode 100644
index 0000000..58e89b8
--- /dev/null
+++ b/gdb/remote-nindy.c
@@ -0,0 +1,852 @@
+/* Memory-access and commands for remote NINDY process, for GDB.
+   Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Contributed by Intel Corporation.  Modified from remote.c by Chris Benenati.
+
+GDB is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY.  No author or distributor accepts responsibility to anyone
+for the consequences of using it or for whether it serves any
+particular purpose or works at all, unless he says so in writing.
+Refer to the GDB General Public License for full details.
+
+Everyone is granted permission to copy, modify and redistribute GDB,
+but only under the conditions described in the GDB General Public
+License.  A copy of this license is supposed to have been given to you
+along with GDB so you can know your rights and responsibilities.  It
+should be in a file named COPYING.  Among other things, the copyright
+notice and this notice must be preserved on all copies.
+
+In other words, go ahead and share GDB, but don't try to stop
+anyone else from sharing it farther.  Help stamp out software hoarding!
+*/
+
+/*
+Except for the data cache routines, this file bears little resemblence
+to remote.c.  A new (although similar) protocol has been specified, and
+portions of the code are entirely dependent on having an i80960 with a
+NINDY ROM monitor at the other end of the line.
+*/
+
+/*****************************************************************************
+ *
+ * REMOTE COMMUNICATION PROTOCOL BETWEEN GDB960 AND THE NINDY ROM MONITOR.
+ *
+ *
+ * MODES OF OPERATION
+ * ----- -- ---------
+ *	
+ * As far as NINDY is concerned, GDB is always in one of two modes: command
+ * mode or passthrough mode.
+ *
+ * In command mode (the default) pre-defined packets containing requests
+ * are sent by GDB to NINDY.  NINDY never talks except in reponse to a request.
+ *
+ * Once the the user program is started, GDB enters passthrough mode, to give
+ * the user program access to the terminal.  GDB remains in this mode until
+ * NINDY indicates that the program has stopped.
+ *
+ *
+ * PASSTHROUGH MODE
+ * ----------- ----
+ *
+ * GDB writes all input received from the keyboard directly to NINDY, and writes
+ * all characters received from NINDY directly to the monitor.
+ *
+ * Keyboard input is neither buffered nor echoed to the monitor.
+ *
+ * GDB remains in passthrough mode until NINDY sends a single ^P character,
+ * to indicate that the user process has stopped.
+ *
+ * Note:
+ *	GDB assumes NINDY performs a 'flushreg' when the user program stops.
+ *
+ *
+ * COMMAND MODE
+ * ------- ----
+ *
+ * All info (except for message ack and nak) is transferred between gdb
+ * and the remote processor in messages of the following format:
+ *
+ *		<info>#<checksum>
+ *
+ * where 
+ *	#	is a literal character
+ *
+ *	<info>	ASCII information;  all numeric information is in the
+ *		form of hex digits ('0'-'9' and lowercase 'a'-'f').
+ *
+ *	<checksum>
+ *		is a pair of ASCII hex digits representing an 8-bit
+ *		checksum formed by adding together each of the
+ *		characters in <info>.
+ *
+ * The receiver of a message always sends a single character to the sender
+ * to indicate that the checksum was good ('+') or bad ('-');  the sender
+ * re-transmits the entire message over until a '+' is received.
+ *
+ * In response to a command NINDY always sends back either data or
+ * a result code of the form "Xnn", where "nn" are hex digits and "X00"
+ * means no errors.  (Exceptions: the "s" and "c" commands don't respond.)
+ *
+ * SEE THE HEADER OF THE FILE "gdb.c" IN THE NINDY MONITOR SOURCE CODE FOR A
+ * FULL DESCRIPTION OF LEGAL COMMANDS.
+ *
+ * SEE THE FILE "stop.h" IN THE NINDY MONITOR SOURCE CODE FOR A LIST
+ * OF STOP CODES.
+ *
+ ***************************************************************************/
+
+#include "defs.h"
+#include <signal.h>
+#include <sys/types.h>
+#include <setjmp.h>
+
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "floatformat.h"
+
+#include "wait.h"
+#include <sys/file.h>
+#include <ctype.h>
+#include "serial.h"
+#include "nindy-share/env.h"
+#include "nindy-share/stop.h"
+
+#include "dcache.h"
+#include "remote-utils.h"
+
+static DCACHE *nindy_dcache;
+
+extern int unlink();
+extern char *getenv();
+extern char *mktemp();
+
+extern void generic_mourn_inferior ();
+
+extern struct target_ops nindy_ops;
+extern FILE *instream;
+
+extern char ninStopWhy ();
+extern int ninMemGet ();
+extern int ninMemPut ();
+
+int nindy_initial_brk;	/* nonzero if want to send an initial BREAK to nindy */
+int nindy_old_protocol;	/* nonzero if want to use old protocol */
+char *nindy_ttyname;	/* name of tty to talk to nindy on, or null */
+
+#define DLE	'\020'	/* Character NINDY sends to indicate user program has
+			 * halted.  */
+#define TRUE	1
+#define FALSE	0
+
+/* From nindy-share/nindy.c.  */
+extern serial_t nindy_serial;
+
+static int have_regs = 0;	/* 1 iff regs read since i960 last halted */
+static int regs_changed = 0;	/* 1 iff regs were modified since last read */
+
+extern char *exists();
+
+static void
+nindy_fetch_registers PARAMS ((int));
+
+static void
+nindy_store_registers PARAMS ((int));
+
+static char *savename;
+
+static void
+nindy_close (quitting)
+     int quitting;
+{
+  if (nindy_serial != NULL)
+    SERIAL_CLOSE (nindy_serial);
+  nindy_serial = NULL;
+
+  if (savename)
+    free (savename);
+  savename = 0;
+}
+
+/* Open a connection to a remote debugger.   
+   FIXME, there should be "set" commands for the options that are
+   now specified with gdb command-line options (old_protocol,
+   and initial_brk).  */
+void
+nindy_open (name, from_tty)
+    char *name;		/* "/dev/ttyXX", "ttyXX", or "XX": tty to be opened */
+    int from_tty;
+{
+  char baudrate[1024];
+
+  if (!name)
+    error_no_arg ("serial port device name");
+
+  target_preopen (from_tty);
+
+  nindy_close (0);
+
+  have_regs = regs_changed = 0;
+  nindy_dcache = dcache_init(ninMemGet, ninMemPut);
+
+  /* Allow user to interrupt the following -- we could hang if there's
+     no NINDY at the other end of the remote tty.  */
+  immediate_quit++;
+  /* If baud_rate is -1, then ninConnect will not recognize the baud rate
+     and will deal with the situation in a (more or less) reasonable
+     fashion.  */
+  sprintf(baudrate, "%d", baud_rate);
+  ninConnect(name, baudrate,
+	     nindy_initial_brk, !from_tty, nindy_old_protocol);
+  immediate_quit--;
+
+  if (nindy_serial == NULL)
+    {
+      perror_with_name (name);
+    }
+
+  savename = savestring (name, strlen (name));
+  push_target (&nindy_ops);
+
+  target_fetch_registers(-1);
+
+  init_thread_list ();
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+  normal_stop ();
+}
+
+/* User-initiated quit of nindy operations.  */
+
+static void
+nindy_detach (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  if (name)
+    error ("Too many arguments");
+  pop_target ();
+}
+
+static void
+nindy_files_info ()
+{
+  /* FIXME: this lies about the baud rate if we autobauded.  */
+  printf_unfiltered("\tAttached to %s at %d bits per second%s%s.\n", savename,
+	 baud_rate,
+	 nindy_old_protocol? " in old protocol": "",
+         nindy_initial_brk? " with initial break": "");
+}
+
+/* Return the number of characters in the buffer before
+   the first DLE character.  */
+
+static
+int
+non_dle( buf, n )
+    char *buf;		/* Character buffer; NOT '\0'-terminated */
+    int n;		/* Number of characters in buffer */
+{
+  int i;
+
+  for ( i = 0; i < n; i++ ){
+    if ( buf[i] == DLE ){
+      break;
+    }
+  }
+  return i;
+}
+
+/* Tell the remote machine to resume.  */
+
+void
+nindy_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  if (siggnal != TARGET_SIGNAL_0 && siggnal != stop_signal)
+    warning ("Can't send signals to remote NINDY targets.");
+
+  dcache_flush(nindy_dcache);
+  if ( regs_changed )
+    {
+      nindy_store_registers (-1);
+      regs_changed = 0;
+    }
+  have_regs = 0;
+  ninGo( step );
+}
+
+/* FIXME, we can probably use the normal terminal_inferior stuff here.
+   We have to do terminal_inferior and then set up the passthrough
+   settings initially.  Thereafter, terminal_ours and terminal_inferior
+   will automatically swap the settings around for us.  */
+
+struct clean_up_tty_args {
+  serial_ttystate state;
+  serial_t serial;
+};
+static  struct clean_up_tty_args tty_args;
+
+static void
+clean_up_tty (ptrarg)
+     PTR ptrarg;
+{
+  struct clean_up_tty_args *args = (struct clean_up_tty_args *) ptrarg;
+  SERIAL_SET_TTY_STATE (args->serial, args->state);
+  free (args->state);
+  warning ("\n\nYou may need to reset the 80960 and/or reload your program.\n");
+}
+
+/* Recover from ^Z or ^C while remote process is running */
+static void (*old_ctrlc)();  
+#ifdef SIGTSTP
+static void (*old_ctrlz)();
+#endif
+
+static void
+clean_up_int()
+{
+  SERIAL_SET_TTY_STATE (tty_args.serial, tty_args.state);
+  free (tty_args.state);
+
+  signal(SIGINT, old_ctrlc);
+#ifdef SIGTSTP
+  signal(SIGTSTP, old_ctrlz);
+#endif
+  error("\n\nYou may need to reset the 80960 and/or reload your program.\n");
+}
+
+/* Wait until the remote machine stops. While waiting, operate in passthrough
+ * mode; i.e., pass everything NINDY sends to gdb_stdout, and everything from
+ * stdin to NINDY.
+ *
+ * Return to caller, storing status in 'status' just as `wait' would.
+ */
+
+static int
+nindy_wait( pid, status )
+    int pid;
+    struct target_waitstatus *status;
+{
+  fd_set fds;
+  int c;
+  char buf[2];
+  int i, n;
+  unsigned char stop_exit;
+  unsigned char stop_code;
+  struct cleanup *old_cleanups;
+  long ip_value, fp_value, sp_value;	/* Reg values from stop */
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  /* OPERATE IN PASSTHROUGH MODE UNTIL NINDY SENDS A DLE CHARACTER */
+
+  /* Save current tty attributes, and restore them when done.  */
+  tty_args.serial = SERIAL_FDOPEN (0);
+  tty_args.state = SERIAL_GET_TTY_STATE (tty_args.serial);
+  old_ctrlc = signal( SIGINT, clean_up_int );
+#ifdef SIGTSTP
+  old_ctrlz = signal( SIGTSTP, clean_up_int );
+#endif
+
+  old_cleanups = make_cleanup (clean_up_tty, &tty_args);
+
+  /* Pass input from keyboard to NINDY as it arrives.  NINDY will interpret
+     <CR> and perform echo.  */
+  /* This used to set CBREAK and clear ECHO and CRMOD.  I hope this is close
+     enough.  */
+  SERIAL_RAW (tty_args.serial);
+
+  while (1)
+    {
+      /* Input on remote */
+      c = SERIAL_READCHAR (nindy_serial, -1);
+      if (c == SERIAL_ERROR)
+	{
+	  error ("Cannot read from serial line");
+	}
+      else if (c == 0x1b) /* ESC */
+	{
+	  c = SERIAL_READCHAR (nindy_serial, -1);
+	  c &= ~0x40;
+	} 
+      else if (c != 0x10) /* DLE */
+	/* Write out any characters preceding DLE */
+	{
+	  buf[0] = (char)c;
+	  write (1, buf, 1);
+	}
+      else
+	{
+	  stop_exit = ninStopWhy(&stop_code,
+				 &ip_value, &fp_value, &sp_value);
+	  if (!stop_exit && (stop_code == STOP_SRQ))
+	    {
+	      immediate_quit++;
+	      ninSrq();
+	      immediate_quit--;
+	    }
+	  else
+	    {
+	      /* Get out of loop */
+	      supply_register (IP_REGNUM, 
+			       (char *)&ip_value);
+	      supply_register (FP_REGNUM, 
+			       (char *)&fp_value);
+	      supply_register (SP_REGNUM, 
+			       (char *)&sp_value);
+	      break;
+	    }
+	}
+    }
+
+  SERIAL_SET_TTY_STATE (tty_args.serial, tty_args.state);
+  free (tty_args.state);
+  discard_cleanups (old_cleanups);
+
+  if (stop_exit)
+    {
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = stop_code;
+    }
+  else
+    {
+      /* nindy has some special stop code need to be handled */
+      if (stop_code == STOP_GDB_BPT)
+	stop_code = TRACE_STEP;
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = i960_fault_to_signal (stop_code);
+    }
+  return inferior_pid;
+}
+
+/* Read the remote registers into the block REGS.  */
+
+/* This is the block that ninRegsGet and ninRegsPut handles.  */
+struct nindy_regs {
+  char	local_regs[16 * 4];
+  char	global_regs[16 * 4];
+  char	pcw_acw[2 * 4];
+  char	ip[4];
+  char	tcw[4];
+  char	fp_as_double[4 * 8];
+};
+
+static void
+nindy_fetch_registers(regno)
+     int regno;
+{
+  struct nindy_regs nindy_regs;
+  int regnum;
+
+  immediate_quit++;
+  ninRegsGet( (char *) &nindy_regs );
+  immediate_quit--;
+
+  memcpy (&registers[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16*4);
+  memcpy (&registers[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
+  memcpy (&registers[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2*4);
+  memcpy (&registers[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1*4);
+  memcpy (&registers[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1*4);
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], nindy_regs.fp_as_double, 4 * 8);
+
+  registers_fetched ();
+}
+
+static void
+nindy_prepare_to_store()
+{
+  /* Fetch all regs if they aren't already here.  */
+  read_register_bytes (0, NULL, REGISTER_BYTES);
+}
+
+static void
+nindy_store_registers(regno)
+     int regno;
+{
+  struct nindy_regs nindy_regs;
+  int regnum;
+
+  memcpy (nindy_regs.local_regs, &registers[REGISTER_BYTE (R0_REGNUM)], 16*4);
+  memcpy (nindy_regs.global_regs, &registers[REGISTER_BYTE (G0_REGNUM)], 16*4);
+  memcpy (nindy_regs.pcw_acw, &registers[REGISTER_BYTE (PCW_REGNUM)], 2*4);
+  memcpy (nindy_regs.ip, &registers[REGISTER_BYTE (IP_REGNUM)], 1*4);
+  memcpy (nindy_regs.tcw, &registers[REGISTER_BYTE (TCW_REGNUM)], 1*4);
+  memcpy (nindy_regs.fp_as_double, &registers[REGISTER_BYTE (FP0_REGNUM)], 8*4);
+
+  immediate_quit++;
+  ninRegsPut( (char *) &nindy_regs );
+  immediate_quit--;
+}
+
+/* Read a word from remote address ADDR and return it.
+ * This goes through the data cache.
+ */
+int
+nindy_fetch_word (addr)
+     CORE_ADDR addr;
+{
+	return dcache_fetch (nindy_dcache, addr);
+}
+
+/* Write a word WORD into remote address ADDR.
+   This goes through the data cache.  */
+
+void
+nindy_store_word (addr, word)
+     CORE_ADDR addr;
+     int word;
+{
+	dcache_poke (nindy_dcache, addr, word);
+}
+
+/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.   Copy to inferior if
+   WRITE is nonzero.  Returns the length copied.
+
+   This is stolen almost directly from infptrace.c's child_xfer_memory,
+   which also deals with a word-oriented memory interface.  Sometime,
+   FIXME, rewrite this to not use the word-oriented routines.  */
+
+int
+nindy_xfer_inferior_memory(memaddr, myaddr, len, should_write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+     struct target_ops *target;			/* ignored */
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & - sizeof (int);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+    = (((memaddr + len) - addr) + sizeof (int) - 1) / sizeof (int);
+  /* Allocate buffer of that many longwords.  */
+  register int *buffer = (int *) alloca (count * sizeof (int));
+
+  if (should_write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int)sizeof (int)) {
+	/* Need part of initial word -- fetch it.  */
+        buffer[0] = nindy_fetch_word (addr);
+      }
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1]
+	    = nindy_fetch_word (addr + (count - 1) * sizeof (int));
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+	  errno = 0;
+	  nindy_store_word (addr, buffer[i]);
+	  if (errno)
+	    return 0;
+	}
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (int))
+	{
+	  errno = 0;
+	  buffer[i] = nindy_fetch_word (addr);
+	  if (errno)
+	    return 0;
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+    }
+  return len;
+}
+
+static void
+nindy_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+  int pid;
+
+  if (args && *args)
+    error ("Can't pass arguments to remote NINDY process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  pid = 42;
+
+  /* The "process" (board) is already stopped awaiting our commands, and
+     the program is already downloaded.  We just set its PC and go.  */
+
+  inferior_pid = pid;		/* Needed for wait_for_inferior below */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  /* Let 'er rip... */
+  proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+static void
+reset_command(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (nindy_serial == NULL)
+    {
+      error( "No target system to reset -- use 'target nindy' command.");
+    }
+  if ( query("Really reset the target system?",0,0) )
+    {
+      SERIAL_SEND_BREAK (nindy_serial);
+      tty_flush (nindy_serial);
+    }
+}
+
+void
+nindy_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* Ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+void
+nindy_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&nindy_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+/* Pass the args the way catch_errors wants them.  */
+static int
+nindy_open_stub (arg)
+     char *arg;
+{
+  nindy_open (arg, 1);
+  return 1;
+}
+
+static void
+nindy_load( filename, from_tty )
+    char *filename;
+    int from_tty;
+{
+  asection *s;
+  /* Can't do unix style forking on a VMS system, so we'll use bfd to do
+     all the work for us
+     */
+
+  bfd *file = bfd_openr(filename,0);
+  if (!file)
+  {
+    perror_with_name(filename);
+    return;
+  }
+
+  if (!bfd_check_format(file, bfd_object))
+  {
+    error("can't prove it's an object file\n");
+    return;
+  }
+ 
+  for ( s = file->sections; s; s=s->next)
+  {
+    if (s->flags & SEC_LOAD)
+    {
+      char *buffer = xmalloc(s->_raw_size);
+      bfd_get_section_contents(file, s, buffer, 0, s->_raw_size);
+      printf("Loading section %s, size %x vma %x\n",
+             s->name,
+             s->_raw_size,
+             s->vma);
+      ninMemPut(s->vma, buffer, s->_raw_size);
+      free(buffer);
+    }
+  }
+  bfd_close(file);
+}
+
+static int
+load_stub (arg)
+     char *arg;
+{
+  target_load (arg, 1);
+  return 1;
+}
+
+/* This routine is run as a hook, just before the main command loop is
+   entered.  If gdb is configured for the i960, but has not had its
+   nindy target specified yet, this will loop prompting the user to do so.
+
+   Unlike the loop provided by Intel, we actually let the user get out
+   of this with a RETURN.  This is useful when e.g. simply examining
+   an i960 object file on the host system.  */
+
+void
+nindy_before_main_loop ()
+{
+  char ttyname[100];
+  char *p, *p2;
+
+  while (target_stack->target_ops != &nindy_ops) /* What is this crap??? */
+    {				/* remote tty not specified yet */
+	if ( instream == stdin ){
+		printf_unfiltered("\nAttach /dev/ttyNN -- specify NN, or \"quit\" to quit:  ");
+		gdb_flush( gdb_stdout );
+	}
+	fgets( ttyname, sizeof(ttyname)-1, stdin );
+
+	/* Strip leading and trailing whitespace */
+	for ( p = ttyname; isspace(*p); p++ ){
+		;
+	}
+	if ( *p == '\0' ){
+		return;		/* User just hit spaces or return, wants out */
+	}
+	for ( p2= p; !isspace(*p2) && (*p2 != '\0'); p2++ ){
+		;
+	}
+	*p2= '\0';
+	if ( STREQ("quit",p) ){
+		exit(1);
+	}
+
+	if (catch_errors (nindy_open_stub, p, "", RETURN_MASK_ALL))
+	  {
+	    /* Now that we have a tty open for talking to the remote machine,
+	       download the executable file if one was specified.  */
+	    if (exec_bfd)
+	      {
+		catch_errors (load_stub, bfd_get_filename (exec_bfd), "",
+			      RETURN_MASK_ALL);
+	      }
+	  }
+      }
+}
+
+/* Define the target subroutine names */
+
+struct target_ops nindy_ops ;
+
+static void 
+init_nindy_ops(void)
+{
+  nindy_ops.to_shortname =   "nindy"; "Remote serial target in i960 NINDY-specific protocol",
+					nindy_ops.to_longname =   "Use a remote i960 system running NINDY connected by a serial line.\n\
+Specify the name of the device the serial line is connected to.\n\
+The speed (baud rate), whether to use the old NINDY protocol,\n\
+and whether to send a break on startup, are controlled by options\n\
+specified when you started GDB." ;
+  nindy_ops.to_doc =   "";
+  nindy_ops.to_open =   nindy_open;
+  nindy_ops.to_close =   nindy_close;
+  nindy_ops.to_attach =   0;
+  nindy_ops.to_post_attach = NULL;
+  nindy_ops.to_require_attach = NULL;
+  nindy_ops.to_detach =   nindy_detach;
+  nindy_ops.to_require_detach = NULL;
+  nindy_ops.to_resume =   nindy_resume;
+  nindy_ops.to_wait  =   nindy_wait;
+  nindy_ops.to_post_wait = NULL;
+  nindy_ops.to_fetch_registers  =   nindy_fetch_registers;
+  nindy_ops.to_store_registers  =   nindy_store_registers;
+  nindy_ops.to_prepare_to_store =   nindy_prepare_to_store;
+  nindy_ops.to_xfer_memory  =   nindy_xfer_inferior_memory;
+  nindy_ops.to_files_info  =   nindy_files_info;
+  nindy_ops.to_insert_breakpoint =   memory_insert_breakpoint;
+  nindy_ops.to_remove_breakpoint =   memory_remove_breakpoint;
+  nindy_ops.to_terminal_init  =   0;
+  nindy_ops.to_terminal_inferior =   0;
+  nindy_ops.to_terminal_ours_for_output =   0;
+  nindy_ops.to_terminal_ours  =   0;
+  nindy_ops.to_terminal_info  =   0;	/* Terminal crud */
+  nindy_ops.to_kill  =   nindy_kill;
+  nindy_ops.to_load  =   nindy_load;
+  nindy_ops.to_lookup_symbol =   0; /* lookup_symbol */
+  nindy_ops.to_create_inferior =   nindy_create_inferior;
+  nindy_ops.to_post_startup_inferior = NULL;
+  nindy_ops.to_acknowledge_created_inferior = NULL;
+  nindy_ops.to_clone_and_follow_inferior = NULL;
+  nindy_ops.to_post_follow_inferior_by_clone = NULL;
+  nindy_ops.to_insert_fork_catchpoint = NULL;
+  nindy_ops.to_remove_fork_catchpoint = NULL;
+  nindy_ops.to_insert_vfork_catchpoint = NULL;
+  nindy_ops.to_remove_vfork_catchpoint = NULL;
+  nindy_ops.to_has_forked = NULL;
+  nindy_ops.to_has_vforked = NULL;
+  nindy_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  nindy_ops.to_post_follow_vfork = NULL;
+  nindy_ops.to_insert_exec_catchpoint = NULL;
+  nindy_ops.to_remove_exec_catchpoint = NULL;
+  nindy_ops.to_has_execd = NULL;
+  nindy_ops.to_reported_exec_events_per_exec_call = NULL;
+  nindy_ops.to_has_exited = NULL;
+  nindy_ops.to_mourn_inferior =   nindy_mourn_inferior;
+  nindy_ops.to_can_run  =   0;		/* can_run */
+  nindy_ops.to_notice_signals =   0; /* notice_signals */
+  nindy_ops.to_thread_alive  =   0;			/* to_thread_alive */
+  nindy_ops.to_stop  =   0;			/* to_stop */
+  nindy_ops.to_pid_to_exec_file = NULL;
+  nindy_ops.to_core_file_to_sym_file = NULL;
+  nindy_ops.to_stratum =   process_stratum;
+  nindy_ops.DONT_USE =   0; /* next */
+  nindy_ops.to_has_all_memory =   1;
+  nindy_ops.to_has_memory =   1;
+  nindy_ops.to_has_stack =   1;
+  nindy_ops.to_has_registers =   1;
+  nindy_ops.to_has_execution =   1;	/* all mem, mem, stack, regs, exec */
+  nindy_ops.to_sections =   0;
+  nindy_ops.to_sections_end =   0;			/* Section pointers */
+  nindy_ops.to_magic =   OPS_MAGIC;		/* Always the last thing */
+}
+
+void
+_initialize_nindy ()
+{
+  init_nindy_ops() ;
+  add_target (&nindy_ops);
+  add_com ("reset", class_obscure, reset_command,
+	   "Send a 'break' to the remote target system.\n\
+Only useful if the target has been equipped with a circuit\n\
+to perform a hard reset when a break is detected.");
+}
diff --git a/gdb/remote-nrom.c b/gdb/remote-nrom.c
new file mode 100644
index 0000000..4999a68
--- /dev/null
+++ b/gdb/remote-nrom.c
@@ -0,0 +1,360 @@
+/* Remote debugging with the XLNT Designs, Inc (XDI) NetROM.
+   Copyright 1990, 1991, 1992, 1995 Free Software Foundation, Inc.
+   Contributed by:
+	 Roger Moyers 
+	 XLNT Designs, Inc.
+	 15050 Avenue of Science, Suite 106
+	 San Diego, CA  92128
+	 (619)487-9320
+	 roger@xlnt.com
+   Adapted from work done at Cygnus Support in remote-nindy.c,
+   later merged in by Stan Shebs at Cygnus.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcmd.h"
+#include "serial.h"
+#include "target.h"
+
+/* Default ports used to talk with the NetROM.  */
+
+#define DEFAULT_NETROM_LOAD_PORT    1236
+#define DEFAULT_NETROM_CONTROL_PORT 1237
+
+static void nrom_close PARAMS ((int quitting));
+
+/* New commands.  */
+
+static void nrom_passthru PARAMS ((char *, int));
+
+/* We talk to the NetROM over these sockets.  */
+
+static serial_t load_desc = NULL;
+static serial_t ctrl_desc = NULL;
+
+static int load_port = DEFAULT_NETROM_LOAD_PORT;
+static int control_port = DEFAULT_NETROM_CONTROL_PORT;
+
+static char nrom_hostname[100];
+
+/* Forward data declaration. */
+
+extern struct target_ops nrom_ops;
+
+/* Scan input from the remote system, until STRING is found.  Print chars that
+   don't match.  */
+
+static int
+expect (string)
+     char *string;
+{
+  char *p = string;
+  int c;
+
+  immediate_quit = 1;
+
+  while (1)
+    {
+      c = SERIAL_READCHAR (ctrl_desc, 5);
+
+      if (c == *p++)
+	{
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+
+	      return 0;
+	    }
+	}
+      else
+	{
+	  fputc_unfiltered (c, gdb_stdout);
+	  p = string;
+	  if (c == *p)
+	    p++;
+	}
+    }
+}
+
+static void
+nrom_kill ()
+{
+  nrom_close (0);
+}
+
+static serial_t
+open_socket (name, port)
+     char *name;
+     int port;
+{
+  char sockname[100];
+  serial_t desc;
+
+  sprintf (sockname, "%s:%d", name, port);
+  desc = SERIAL_OPEN (sockname);
+  if (!desc)
+    perror_with_name (sockname);
+
+  return desc;
+}
+
+static void
+load_cleanup ()
+{
+  SERIAL_CLOSE (load_desc);
+  load_desc = NULL;
+}
+
+/* Download a file specified in ARGS to the netROM.  */
+
+static void
+nrom_load (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  int fd, rd_amt, fsize;
+  bfd *pbfd;
+  asection *section;
+  char *downloadstring = "download 0\n";
+  struct cleanup *old_chain;
+
+  /* Tell the netrom to get ready to download. */
+  if (SERIAL_WRITE (ctrl_desc, downloadstring, strlen (downloadstring)))
+    error ("nrom_load: control_send() of `%s' failed", downloadstring);
+
+  expect ("Waiting for a connection...\n");
+
+  load_desc = open_socket (nrom_hostname, load_port);
+
+  old_chain = make_cleanup (load_cleanup, 0);
+
+  pbfd = bfd_openr (args, 0);
+
+  if (pbfd)
+    {
+      make_cleanup (bfd_close, pbfd);
+
+      if (!bfd_check_format (pbfd, bfd_object)) 
+	error ("\"%s\": not in executable format: %s",
+	       args, bfd_errmsg (bfd_get_error ()));
+
+      for (section = pbfd->sections; section; section = section->next) 
+	{
+	  if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC)
+	    {
+	      bfd_vma section_address;
+	      unsigned long section_size;
+	      const char *section_name;
+
+	      section_name = bfd_get_section_name (pbfd, section);
+	      section_address = bfd_get_section_vma (pbfd, section);
+	      section_size = bfd_section_size (pbfd, section);
+
+	      if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
+		{
+		  file_ptr fptr;
+
+		  printf_filtered ("[Loading section %s at %x (%d bytes)]\n",
+				   section_name, section_address,
+				   section_size);
+
+		  fptr = 0;
+
+		  while (section_size > 0)
+		    {
+		      char buffer[1024];
+		      int count;
+		      
+		      count = min (section_size, 1024);
+
+		      bfd_get_section_contents (pbfd, section, buffer, fptr,
+						count);
+
+		      SERIAL_WRITE (load_desc, buffer, count);
+		      section_address += count;
+		      fptr += count;
+		      section_size -= count;
+		    }
+		}
+	      else			/* BSS and such */
+		{
+		  printf_filtered ("[section %s: not loading]\n",
+				   section_name);
+		}
+	    }
+	}
+    }
+  else
+    error ("\"%s\": Could not open", args);
+
+  do_cleanups (old_chain);
+}
+
+/* Open a connection to the remote NetROM devices.  */
+
+static void
+nrom_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  int errn;
+
+  if (!name || strchr (name, '/') || strchr (name, ':'))
+    error (
+"To open a NetROM connection, you must specify the hostname\n\
+or IP address of the NetROM device you wish to use.");
+
+  strcpy (nrom_hostname, name);
+
+  target_preopen (from_tty);
+
+  unpush_target (&nrom_ops);
+
+  ctrl_desc = open_socket (nrom_hostname, control_port);
+
+  push_target (&nrom_ops);
+
+  if (from_tty)
+    printf_filtered ("Connected to NetROM device \"%s\"\n", nrom_hostname);
+}
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+nrom_close (quitting)
+     int quitting;
+{
+  if (load_desc)
+    SERIAL_CLOSE (load_desc);
+  if (ctrl_desc)
+    SERIAL_CLOSE (ctrl_desc);
+}
+
+/* Pass arguments directly to the NetROM. */
+
+static void
+nrom_passthru (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  char buf[1024];
+
+  sprintf (buf, "%s\n", args);
+  if (SERIAL_WRITE (ctrl_desc, buf, strlen (buf)))
+    error ("nrom_reset: control_send() of `%s'failed", args);
+}
+
+static void
+nrom_mourn() 
+{ 
+  unpush_target (&nrom_ops);
+  generic_mourn_inferior ();
+}
+
+/* Define the target vector. */
+
+struct target_ops nrom_ops ;
+
+static void 
+init_nrom_ops(void)
+{
+  nrom_ops.to_shortname =   "nrom";	
+  nrom_ops.to_longname =   "Remote XDI `NetROM' target";
+  nrom_ops.to_doc =   "Remote debug using a NetROM over Ethernet"; 
+  nrom_ops.to_open =   nrom_open;		
+  nrom_ops.to_close =   nrom_close;		
+  nrom_ops.to_attach =   NULL;
+  nrom_ops.to_post_attach = NULL;
+  nrom_ops.to_require_attach = NULL;			
+  nrom_ops.to_detach =   NULL;
+  nrom_ops.to_require_detach = NULL;	
+  nrom_ops.to_resume =   NULL;			
+  nrom_ops.to_wait  =   NULL;
+  nrom_ops.to_post_wait = NULL;		
+  nrom_ops.to_fetch_registers  =   NULL;
+  nrom_ops.to_store_registers  =   NULL;
+  nrom_ops.to_prepare_to_store =   NULL;
+  nrom_ops.to_xfer_memory  =   NULL;	
+  nrom_ops.to_files_info  =   NULL;
+  nrom_ops.to_insert_breakpoint =   NULL;
+  nrom_ops.to_remove_breakpoint =   NULL;
+  nrom_ops.to_terminal_init  =   NULL;	
+  nrom_ops.to_terminal_inferior =   NULL;
+  nrom_ops.to_terminal_ours_for_output =   NULL;
+  nrom_ops.to_terminal_ours  =   NULL;	
+  nrom_ops.to_terminal_info  =   NULL;	
+  nrom_ops.to_kill  =   nrom_kill;
+  nrom_ops.to_load  =   nrom_load;
+  nrom_ops.to_lookup_symbol =   NULL;	
+  nrom_ops.to_create_inferior =   NULL;
+  nrom_ops.to_post_startup_inferior = NULL;
+  nrom_ops.to_acknowledge_created_inferior = NULL;
+  nrom_ops.to_clone_and_follow_inferior = NULL;
+  nrom_ops.to_post_follow_inferior_by_clone = NULL;
+  nrom_ops.to_insert_fork_catchpoint = NULL;
+  nrom_ops.to_remove_fork_catchpoint = NULL;
+  nrom_ops.to_insert_vfork_catchpoint = NULL;
+  nrom_ops.to_remove_vfork_catchpoint = NULL;
+  nrom_ops.to_has_forked = NULL;
+  nrom_ops.to_has_vforked = NULL;
+  nrom_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  nrom_ops.to_post_follow_vfork = NULL;	
+  nrom_ops.to_insert_exec_catchpoint = NULL;
+  nrom_ops.to_remove_exec_catchpoint = NULL;
+  nrom_ops.to_has_execd = NULL;
+  nrom_ops.to_reported_exec_events_per_exec_call = NULL;
+  nrom_ops.to_has_exited = NULL;
+  nrom_ops.to_mourn_inferior =   nrom_mourn;
+  nrom_ops.to_can_run  =   NULL;
+  nrom_ops.to_notice_signals =   0;
+  nrom_ops.to_thread_alive  =   0;
+  nrom_ops.to_stop  =   0;
+  nrom_ops.to_pid_to_exec_file = NULL;
+  nrom_ops.to_core_file_to_sym_file = NULL;
+  nrom_ops.to_stratum =   download_stratum;
+  nrom_ops.DONT_USE =   NULL;			
+  nrom_ops.to_has_all_memory =   1;		
+  nrom_ops.to_has_memory =   1;			
+  nrom_ops.to_has_stack =   1;			
+  nrom_ops.to_has_registers =   1;		
+  nrom_ops.to_has_execution =   0;		
+  nrom_ops.to_sections =   NULL;		
+  nrom_ops.to_sections_end =   NULL;		
+  nrom_ops.to_magic =   OPS_MAGIC ;		
+};
+
+void
+_initialize_remote_nrom ()
+{
+  init_nrom_ops() ;
+  add_target (&nrom_ops);
+
+  add_show_from_set (
+    add_set_cmd ("nrom_load_port", no_class, var_zinteger, (char *)&load_port,
+		 "Set the port to use for NetROM downloads\n", &setlist),
+		     &showlist);
+
+  add_show_from_set (
+    add_set_cmd ("nrom_control_port", no_class, var_zinteger, (char *)&control_port,
+		 "Set the port to use for NetROM debugger services\n", &setlist),
+		     &showlist);
+
+  add_cmd ("nrom", no_class, nrom_passthru,
+	   "Pass arguments as command to NetROM",
+	   &cmdlist);
+}
diff --git a/gdb/remote-os9k.c b/gdb/remote-os9k.c
new file mode 100644
index 0000000..2abfa83
--- /dev/null
+++ b/gdb/remote-os9k.c
@@ -0,0 +1,1264 @@
+/* Remote debugging interface for boot monitors, for GDB.
+   Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file was derived from remote-eb.c, which did a similar job, but for
+   an AMD-29K running EBMON.  That file was in turn derived from remote.c
+   as mentioned in the following comment (left in for comic relief):
+
+  "This is like remote.c but is for a different situation--
+   having a PC running os9000 hook up with a unix machine with
+   a serial line, and running ctty com2 on the PC. os9000 has a debug
+   monitor called ROMBUG running.  Not to mention that the PC
+   has PC/NFS, so it can access the same executables that gdb can,
+   over the net in real time."
+
+   In reality, this module talks to a debug monitor called 'ROMBUG', which
+   We communicate with ROMBUG via a direct serial line, the network version
+   of ROMBUG is not available yet.
+*/
+
+/* FIXME This file needs to be rewritten if it's to work again, either
+   to self-contained or to use the new monitor interface.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <signal.h>
+#include "gdb_string.h"
+#include <sys/types.h>
+#include "command.h"
+#include "serial.h"
+#include "monitor.h"
+#include "remote-utils.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+
+struct cmd_list_element *showlist;
+extern struct target_ops rombug_ops;		/* Forward declaration */
+extern struct monitor_ops rombug_cmds;		/* Forward declaration */
+extern struct cmd_list_element *setlist;
+extern struct cmd_list_element *unsetlist;
+extern int attach_flag;
+
+static void rombug_close();
+static void rombug_fetch_register();
+static void rombug_fetch_registers();
+static void rombug_store_register();
+#if 0
+static int sr_get_debug();			/* flag set by "set remotedebug" */
+#endif
+static int hashmark;				/* flag set by "set hash" */
+static int rombug_is_open = 0;
+
+/* FIXME: Replace with sr_get_debug ().  */
+#define LOG_FILE "monitor.log"
+FILE *log_file;
+static int monitor_log = 0;
+static int tty_xon = 0;
+static int tty_xoff = 0;
+
+static int timeout = 10;
+static int is_trace_mode = 0;
+/* Descriptor for I/O to remote machine.  Initialize it to NULL*/
+static serial_t monitor_desc = NULL;
+
+static CORE_ADDR bufaddr = 0;
+static int buflen = 0;
+static char readbuf[16];
+
+/* Send data to monitor.  Works just like printf. */
+static void
+#ifdef ANSI_PROTOTYPES
+printf_monitor(char *pattern, ...)
+#else
+printf_monitor(va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char buf[200];
+  int i;
+
+#ifdef ANSI_PROTOTYPES
+  va_start (args, pattern);
+#else
+  char *pattern;
+  va_start(args);
+  pattern = va_arg(args, char *);
+#endif
+
+  vsprintf(buf, pattern, args);
+  va_end(args);
+
+  if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
+    fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+}
+
+/* Read a character from the remote system, doing all the fancy timeout stuff*/
+static int
+readchar(timeout)
+     int timeout;
+{
+  int c;
+
+  c = SERIAL_READCHAR(monitor_desc, timeout);
+
+  if (sr_get_debug())
+    putchar(c & 0x7f);
+
+  if (monitor_log && isascii(c))
+    putc(c & 0x7f, log_file);
+
+  if (c >= 0)
+    return c & 0x7f;
+
+  if (c == SERIAL_TIMEOUT)
+    {
+      if (timeout == 0)
+	return c;		/* Polls shouldn't generate timeout errors */
+
+      error("Timeout reading from remote system.");
+    }
+
+  perror_with_name("remote-monitor");
+}
+
+/* Scan input from the remote system, until STRING is found.  If DISCARD is
+   non-zero, then discard non-matching input, else print it out.
+   Let the user break out immediately.  */
+static void
+expect(string, discard)
+     char *string;
+     int discard;
+{
+  char *p = string;
+  int c;
+
+  if (sr_get_debug())
+    printf ("Expecting \"%s\"\n", string);
+
+  immediate_quit = 1;
+  while (1)
+    {
+      c = readchar(timeout);
+      if (!isascii (c))
+	continue;
+      if (c == *p++)
+	{
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      if (sr_get_debug())
+		printf ("\nMatched\n");
+	      return;
+	    }
+	}
+      else
+	{
+	  if (!discard)
+	    {
+	      fwrite(string, 1, (p - 1) - string, stdout);
+	      putchar((char)c);
+	      fflush(stdout);
+	    }
+	  p = string;
+	}
+    }
+}
+
+/* Keep discarding input until we see the ROMBUG prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  rombug_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a rombug_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt(discard)
+     int discard;
+{
+  if (monitor_log)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+    fflush(log_file);
+
+  if (is_trace_mode) {
+    expect("trace", discard);
+  } else {
+    expect (PROMPT, discard);
+  }
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit(ignore_space)
+     int ignore_space;
+{
+  int ch;
+  while (1)
+    {
+      ch = readchar(timeout);
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt(1);
+	  error("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from monitor and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Get N 32-bit words from remote, each preceded by a space,
+   and put them in registers starting at REGNO.  */
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+  long val;
+  int i;
+  unsigned char b;
+
+  for (i = 0; i < n; i++)
+    {
+      int j;
+      
+      val = 0;
+      for (j = 0; j < 4; j++)
+	{
+	  get_hex_byte (&b);
+	  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	    val = (val << 8) + b;
+	  else
+	    val = val + (b << (j*8));
+	}
+      supply_register (regno++, (char *) &val);
+    }
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+rombug_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error("Can't pass arguments to remote ROMBUG process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  if (monitor_log)
+    fputs ("\nIn Create_inferior()", log_file);
+
+
+/* The "process" (board) is already stopped awaiting our commands, and
+   the program is already downloaded.  We just set its PC and go.  */
+
+  init_wait_for_inferior ();
+  proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static char dev_name[100];
+
+static void
+rombug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args == NULL)
+    error ("Use `target RomBug DEVICE-NAME' to use a serial port, or \n\
+`target RomBug HOST-NAME:PORT-NUMBER' to use a network connection.");
+
+  target_preopen(from_tty);
+
+  if (rombug_is_open)
+    unpush_target(&rombug_ops);
+
+  strcpy(dev_name, args);
+  monitor_desc = SERIAL_OPEN(dev_name);
+  if (monitor_desc == NULL)
+    perror_with_name(dev_name);
+
+  /* if baud rate is set by 'set remotebaud' */
+  if (SERIAL_SETBAUDRATE (monitor_desc, sr_get_baud_rate()))
+    {
+      SERIAL_CLOSE (monitor_desc);
+      perror_with_name ("RomBug");
+    }
+  SERIAL_RAW(monitor_desc);
+  if (tty_xon || tty_xoff)
+    {
+    struct hardware_ttystate { struct termios t;} *tty_s;
+
+      tty_s =(struct hardware_ttystate  *)SERIAL_GET_TTY_STATE(monitor_desc);
+      if (tty_xon) tty_s->t.c_iflag |= IXON; 
+      if (tty_xoff) tty_s->t.c_iflag |= IXOFF;
+      SERIAL_SET_TTY_STATE(monitor_desc, (serial_ttystate) tty_s);
+    }
+
+  rombug_is_open = 1;
+
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+
+  push_monitor (&rombug_cmds);
+  printf_monitor("\r");	/* CR wakes up monitor */
+  expect_prompt(1);
+  push_target (&rombug_ops);
+  attach_flag = 1;
+
+  if (from_tty)
+    printf("Remote %s connected to %s\n", target_shortname,
+	   dev_name);
+
+  rombug_fetch_registers();
+
+  printf_monitor ("ov e \r");
+  expect_prompt(1);
+  bufaddr = 0;
+  buflen = 0;
+}
+
+/*
+ * Close out all files and local state before this target loses control.
+ */
+
+static void
+rombug_close (quitting)
+     int quitting;
+{
+  if (rombug_is_open) {
+    SERIAL_CLOSE(monitor_desc);
+    monitor_desc = NULL;
+    rombug_is_open = 0;
+  }
+
+  if (log_file) {
+    if (ferror(log_file))
+      fprintf(stderr, "Error writing log file.\n");
+    if (fclose(log_file) != 0)
+      fprintf(stderr, "Error closing log file.\n");
+    log_file = 0;
+  }
+}
+
+int
+rombug_link(mod_name, text_reloc)
+     char *mod_name;
+     CORE_ADDR *text_reloc;
+{
+  int i, j;
+  unsigned long val;
+  unsigned char b;
+
+  printf_monitor("l %s \r", mod_name); 
+  expect_prompt(1);
+  printf_monitor(".r \r");
+  expect(REG_DELIM, 1);
+  for (i=0; i <= 7; i++)
+    {
+      val = 0;
+      for (j = 0; j < 4; j++)
+        {
+          get_hex_byte(&b);
+          val = (val << 8) + b;
+	}
+    }
+  expect_prompt(1);
+  *text_reloc = val;
+  return 1;
+}
+
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+static void
+rombug_detach (from_tty)
+     int from_tty;
+{
+  if (attach_flag) {
+    printf_monitor (GO_CMD);
+    attach_flag = 0;
+  }
+  pop_target();		/* calls rombug_close to do the real work */
+  if (from_tty)
+    printf ("Ending remote %s debugging\n", target_shortname);
+}
+ 
+/*
+ * Tell the remote machine to resume.
+ */
+static void
+rombug_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  if (monitor_log)
+    fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
+
+  if (step)
+    {
+      is_trace_mode = 1;
+      printf_monitor (STEP_CMD);
+      /* wait for the echo.  **
+      expect (STEP_CMD, 1);
+      */
+    }
+  else
+    {
+      printf_monitor (GO_CMD);
+      /* swallow the echo.  **
+      expect (GO_CMD, 1);
+      */
+    }
+  bufaddr = 0;
+  buflen= 0;
+}
+
+/*
+ * Wait until the remote machine stops, then return,
+ * storing status in status just as `wait' would.
+ */
+
+static int
+rombug_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int old_timeout = timeout;
+  struct section_offsets *offs;
+  CORE_ADDR addr, pc;
+  struct obj_section *obj_sec;
+
+  if (monitor_log)
+    fputs ("\nIn wait ()", log_file);
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  timeout = -1;		/* Don't time out -- user program is running. */
+  expect ("eax:", 0);   /* output any message before register display */
+  expect_prompt(1);     /* Wait for prompt, outputting extraneous text */
+
+  status->kind = TARGET_WAITKIND_STOPPED;
+  status->value.sig = TARGET_SIGNAL_TRAP;
+  timeout = old_timeout;
+  rombug_fetch_registers();
+  bufaddr = 0;
+  buflen = 0;
+  pc = read_register(PC_REGNUM);
+  addr = read_register(DATABASE_REG);
+  obj_sec = find_pc_section (pc);
+  if (obj_sec != NULL)
+    {
+      if (obj_sec->objfile != symfile_objfile)
+        new_symfile_objfile(obj_sec->objfile, 1, 0);
+      offs = ((struct section_offsets *)
+	 alloca (sizeof (struct section_offsets)
+	 + (symfile_objfile->num_sections * sizeof (offs->offsets))));
+      memcpy (offs, symfile_objfile->section_offsets,
+         (sizeof (struct section_offsets) + 
+	 (symfile_objfile->num_sections * sizeof (offs->offsets))));
+      ANOFFSET (offs, SECT_OFF_DATA) = addr;
+      ANOFFSET (offs, SECT_OFF_BSS) = addr;
+
+      objfile_relocate(symfile_objfile, offs);
+    }
+
+  return 0;
+}
+
+/* Return the name of register number regno in the form input and output by
+   monitor.  Currently, register_names just happens to contain exactly what
+   monitor wants.  Lets take advantage of that just as long as possible! */
+
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char buf[50];
+  char *p;
+  char *b;
+
+  b = buf;
+
+  if (regno < 0)
+    return ("");
+/*
+  for (p = REGISTER_NAME (regno); *p; p++)
+    *b++ = toupper(*p);
+  *b = '\000';
+*/
+  p = (char *)REGISTER_NAME (regno);
+  return p;
+/*
+  return buf;
+*/
+}
+
+/* read the remote registers into the block regs.  */
+
+static void
+rombug_fetch_registers ()
+{
+  int regno, j, i;
+  long val;
+  unsigned char b;
+
+  printf_monitor (GET_REG);
+  expect("eax:", 1);
+  expect("\n", 1);
+  get_hex_regs(1, 0);
+  get_hex_regs(1, 3);
+  get_hex_regs(1, 1);
+  get_hex_regs(1, 2);
+  get_hex_regs(1, 6);
+  get_hex_regs(1, 7);
+  get_hex_regs(1, 5);
+  get_hex_regs(1, 4);
+  for (regno = 8; regno <= 15; regno++)
+    {
+      expect(REG_DELIM, 1);
+      if (regno >= 8 && regno <= 13)
+	{
+	  val = 0;
+	  for (j = 0; j < 2; j++)
+            {
+              get_hex_byte (&b);
+	      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+		val = (val << 8) + b;
+	      else
+		val = val + (b << (j*8));
+            }
+
+	  if (regno == 8) i = 10;
+	  if (regno >=  9 && regno <= 12) i = regno + 3;
+	  if (regno == 13) i = 11;
+	  supply_register (i, (char *) &val);
+	}
+      else if (regno == 14)
+	{
+	  get_hex_regs(1, PC_REGNUM);
+	}
+      else if (regno == 15)
+	{
+	  get_hex_regs(1, 9);
+	}
+      else
+	{
+	  val = 0;
+	  supply_register(regno, (char *) &val);
+	}
+    }
+  is_trace_mode = 0;
+  expect_prompt (1);
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.
+   Returns errno value.  */
+static void
+rombug_fetch_register (regno)
+     int regno;
+{
+  int val, j;
+  unsigned char b;
+
+  if (monitor_log) {
+    fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno));
+    fflush (log_file);
+  }
+
+  if (regno < 0)
+    {
+      rombug_fetch_registers ();
+    }
+  else
+    {
+      char *name = get_reg_name (regno);
+      printf_monitor (GET_REG);
+      if (regno >= 10 && regno <= 15)
+	{
+	  expect ("\n", 1);
+	  expect ("\n", 1);
+          expect (name, 1);
+          expect (REG_DELIM, 1);
+	  val = 0;
+	  for (j = 0; j < 2; j++)
+            {
+              get_hex_byte (&b);
+	      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+		val = (val << 8) + b;
+	      else
+		val = val + (b << (j*8));
+            }
+	  supply_register (regno, (char *) &val);
+	}
+      else if (regno == 8 || regno == 9)
+	{
+	  expect ("\n", 1);
+	  expect ("\n", 1);
+	  expect ("\n", 1);
+          expect (name, 1);
+          expect (REG_DELIM, 1);
+	  get_hex_regs (1, regno);
+	}
+      else
+	{
+          expect (name, 1);
+          expect (REG_DELIM, 1);
+	  expect("\n", 1);
+	  get_hex_regs(1, 0);
+	  get_hex_regs(1, 3);
+	  get_hex_regs(1, 1);
+	  get_hex_regs(1, 2);
+	  get_hex_regs(1, 6);
+	  get_hex_regs(1, 7);
+	  get_hex_regs(1, 5);
+	  get_hex_regs(1, 4);
+	}
+      expect_prompt (1);
+    }
+  return;
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+rombug_store_registers ()
+{
+  int regno;
+
+  for (regno = 0; regno <= PC_REGNUM; regno++)
+    rombug_store_register(regno);
+
+  registers_changed ();
+}
+
+/* Store register REGNO, or all if REGNO == 0.
+   return errno value.  */
+static void
+rombug_store_register (regno)
+     int regno;
+{
+char *name;
+
+  if (monitor_log)
+    fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno);
+
+  if (regno == -1)
+    rombug_store_registers ();
+  else
+    {
+      if (sr_get_debug())
+	printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno));
+
+      name = get_reg_name(regno);
+      if (name == 0) return;
+      printf_monitor (SET_REG, name, read_register (regno));
+
+      is_trace_mode = 0;
+      expect_prompt (1);
+    }
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+rombug_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+rombug_files_info ()
+{
+  printf ("\tAttached to %s at %d baud.\n",
+	  dev_name, sr_get_baud_rate());
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns length moved.  */
+static int
+rombug_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int i;
+  char buf[10];
+
+  if (monitor_log)
+    fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+
+  printf_monitor (MEM_SET_CMD, memaddr);
+  for (i = 0; i < len; i++)
+    {
+      expect (CMD_DELIM, 1);
+      printf_monitor ("%x \r", myaddr[i]);
+      if (sr_get_debug())
+	printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
+    }
+  expect (CMD_DELIM, 1);
+  if (CMD_END)
+    printf_monitor (CMD_END);
+  is_trace_mode = 0;
+  expect_prompt (1);
+
+  bufaddr = 0;
+  buflen = 0;
+  return len;
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns length moved.  */
+static int
+rombug_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i, j;
+
+  /* Number of bytes read so far.  */
+  int count;
+
+  /* Starting address of this pass.  */
+  unsigned long startaddr;
+
+  /* Number of bytes to read in this pass.  */
+  int len_this_pass;
+
+  if (monitor_log)
+    fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     rombug_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len To memaddr and gets 0.  */
+  /* However, something like
+     rombug_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+  if (((memaddr - 1) + len) < memaddr) {
+    errno = EIO;
+    return 0;
+  }
+  if (bufaddr <= memaddr && (memaddr+len) <= (bufaddr+buflen))
+    {
+      memcpy(myaddr, &readbuf[memaddr-bufaddr], len);
+      return len;
+    }
+  
+  startaddr = memaddr;
+  count = 0;
+  while (count < len)
+    {
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	len_this_pass -= startaddr % 16;
+      if (len_this_pass > (len - count))
+	len_this_pass = (len - count);
+      if (sr_get_debug())
+	printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr);
+
+      printf_monitor (MEM_DIS_CMD, startaddr, 8);
+      expect ("- ", 1);
+      for (i = 0; i < 16; i++)
+	{
+	  get_hex_byte (&readbuf[i]);
+	}
+      bufaddr = startaddr;
+      buflen = 16;
+      memcpy(&myaddr[count], readbuf, len_this_pass); 
+      count += len_this_pass;
+      startaddr += len_this_pass;
+      expect(CMD_DELIM, 1);
+    }
+  if (CMD_END) 
+      printf_monitor (CMD_END);
+  is_trace_mode = 0;
+  expect_prompt (1);
+
+  return len;
+}
+
+/* FIXME-someday!  merge these two.  */
+static int
+rombug_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  if (write)
+    return rombug_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return rombug_read_inferior_memory (memaddr, myaddr, len);
+}
+
+static void
+rombug_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+rombug_mourn_inferior ()
+{
+  remove_breakpoints ();
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define MAX_MONITOR_BREAKPOINTS 16
+
+static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
+
+static int
+rombug_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+  CORE_ADDR bp_addr = addr;
+  int bp_size = 0;
+
+  if (monitor_log)
+    fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr);
+  BREAKPOINT_FROM_PC (&bp_addr, &bp_size);
+
+  for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
+    if (breakaddr[i] == 0)
+      {
+	breakaddr[i] = addr;
+	if (sr_get_debug())
+	  printf ("Breakpoint at %x\n", addr);
+	rombug_read_inferior_memory (bp_addr, shadow, bp_size);
+	printf_monitor(SET_BREAK_CMD, addr);
+	is_trace_mode = 0;
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
+  return 1;
+}
+
+/*
+ * _remove_breakpoint -- Tell the monitor to remove a breakpoint
+ */
+static int
+rombug_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+  if (monitor_log)
+    fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
+
+  for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
+    if (breakaddr[i] == addr)
+      {
+	breakaddr[i] = 0;
+	printf_monitor(CLR_BREAK_CMD, addr);
+	is_trace_mode = 0;
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+/* Load a file. This is usually an srecord, which is ascii. No 
+   protocol, just sent line by line. */
+
+#define DOWNLOAD_LINE_SIZE 100
+static void
+rombug_load (arg)
+    char	*arg;
+{
+/* this part comment out for os9* */
+#if 0
+  FILE *download;
+  char buf[DOWNLOAD_LINE_SIZE];
+  int i, bytes_read;
+
+  if (sr_get_debug())
+    printf ("Loading %s to monitor\n", arg);
+
+  download = fopen (arg, "r");
+  if (download == NULL)
+    {
+    error (sprintf (buf, "%s Does not exist", arg));
+    return;
+  }
+
+  printf_monitor (LOAD_CMD);
+/*  expect ("Waiting for S-records from host... ", 1); */
+
+  while (!feof (download))
+    {
+      bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
+      if (hashmark)
+	{
+	  putchar ('.');
+	  fflush (stdout);
+	}
+
+      if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
+	fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
+	break;
+      }
+      i = 0;
+      while (i++ <=200000) {} ;     			/* Ugly HACK, probably needs flow control */
+      if (bytes_read < DOWNLOAD_LINE_SIZE)
+	{
+	  if (!feof (download))
+	    error ("Only read %d bytes\n", bytes_read);
+	  break;
+	}
+    }
+
+  if (hashmark)
+    {
+      putchar ('\n');
+    }
+  if (!feof (download))
+    error ("Never got EOF while downloading");
+  fclose (download);
+#endif 0
+}
+
+/* Put a command string, in args, out to MONITOR.  
+   Output from MONITOR is placed on the users terminal until the prompt 
+   is seen. */
+
+static void
+rombug_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  if (monitor_desc == NULL)
+    error("monitor target not open.");
+  
+  if (monitor_log)
+    fprintf (log_file, "\nIn command (args=%s)\n", args);
+
+  if (!args)
+    error("Missing command.");
+	
+  printf_monitor("%s\r", args);
+  expect_prompt(0);
+}
+
+#if 0
+/* Connect the user directly to MONITOR.  This command acts just like the
+   'cu' or 'tip' command.  Use <CR>~. or <CR>~^D to break out.  */
+
+static struct ttystate ttystate;
+
+static void
+cleanup_tty()
+{  printf("\r\n[Exiting connect mode]\r\n");
+  /*SERIAL_RESTORE(0, &ttystate);*/
+}
+
+static void
+connect_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  fd_set readfds;
+  int numfds;
+  int c;
+  char cur_esc = 0;
+
+  dont_repeat();
+
+  if (monitor_desc == NULL)
+    error("monitor target not open.");
+  
+  if (args)
+    fprintf("This command takes no args.  They have been ignored.\n");
+	
+  printf("[Entering connect mode.  Use ~. or ~^D to escape]\n");
+
+  serial_raw(0, &ttystate);
+
+  make_cleanup(cleanup_tty, 0);
+
+  FD_ZERO(&readfds);
+
+  while (1)
+    {
+      do
+	{
+	  FD_SET(0, &readfds);
+	  FD_SET(monitor_desc, &readfds);
+	  numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
+	}
+      while (numfds == 0);
+
+      if (numfds < 0)
+	perror_with_name("select");
+
+      if (FD_ISSET(0, &readfds))
+	{			/* tty input, send to monitor */
+	  c = getchar();
+	  if (c < 0)
+	    perror_with_name("connect");
+
+	  printf_monitor("%c", c);
+	  switch (cur_esc)
+	    {
+	    case 0:
+	      if (c == '\r')
+		cur_esc = c;
+	      break;
+	    case '\r':
+	      if (c == '~')
+		cur_esc = c;
+	      else
+		cur_esc = 0;
+	      break;
+	    case '~':
+	      if (c == '.' || c == '\004')
+		return;
+	      else
+		cur_esc = 0;
+	    }
+	}
+
+      if (FD_ISSET(monitor_desc, &readfds))
+	{
+	  while (1)
+	    {
+	      c = readchar(0);
+	      if (c < 0)
+		break;
+	      putchar(c);
+	    }
+	  fflush(stdout);
+	}
+    }
+}
+#endif
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+#warning FIXME: monitor interface pattern strings, stale struct decl
+struct monitor_ops rombug_cmds = {
+  "g \r",				/* execute or usually GO command */
+  "g \r",				/* continue command */
+  "t \r",				/* single step */
+  "b %x\r",				/* set a breakpoint */
+  "k %x\r",				/* clear a breakpoint */
+  "c %x\r",				/* set memory to a value */
+  "d %x %d\r",				/* display memory */
+  "$%08X",				/* prompt memory commands use */
+  ".%s %x\r",				/* set a register */
+  ":",					/* delimiter between registers */
+  ". \r",				/* read a register */
+  "mf \r",				/* download command */
+  "RomBug: ",				/* monitor command prompt */
+  ": ",					/* end-of-command delimitor */
+  ".\r"					/* optional command terminator */
+};
+
+struct target_ops rombug_ops ;
+
+static void 
+init_rombug_ops(void)
+{
+  rombug_ops.to_shortname =   "rombug";
+  rombug_ops.to_longname =   "Microware's ROMBUG debug monitor";
+  rombug_ops.to_doc =   "Use a remote computer running the ROMBUG debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+    rombug_ops.to_open =   rombug_open;
+  rombug_ops.to_close =   rombug_close;
+  rombug_ops.to_attach =   0;
+  rombug_ops.to_post_attach = NULL;
+  rombug_ops.to_require_attach = NULL;
+  rombug_ops.to_detach =   rombug_detach;
+  rombug_ops.to_require_detach = NULL;
+  rombug_ops.to_resume =   rombug_resume;
+  rombug_ops.to_wait  =   rombug_wait;
+  rombug_ops.to_post_wait = NULL;
+  rombug_ops.to_fetch_registers  =   rombug_fetch_register;
+  rombug_ops.to_store_registers  =   rombug_store_register;
+  rombug_ops.to_prepare_to_store =   rombug_prepare_to_store;
+  rombug_ops.to_xfer_memory  =   rombug_xfer_inferior_memory;
+  rombug_ops.to_files_info  =   rombug_files_info;
+  rombug_ops.to_insert_breakpoint =   rombug_insert_breakpoint;
+  rombug_ops.to_remove_breakpoint =   rombug_remove_breakpoint;	/* Breakpoints */
+  rombug_ops.to_terminal_init  =   0;
+  rombug_ops.to_terminal_inferior =   0;
+  rombug_ops.to_terminal_ours_for_output =   0;
+  rombug_ops.to_terminal_ours  =   0;
+  rombug_ops.to_terminal_info  =   0;				/* Terminal handling */
+  rombug_ops.to_kill  =   rombug_kill;
+  rombug_ops.to_load  =   rombug_load;			/* load */
+  rombug_ops.to_lookup_symbol =   rombug_link;				/* lookup_symbol */
+  rombug_ops.to_create_inferior =   rombug_create_inferior;
+  rombug_ops.to_post_startup_inferior = NULL;
+  rombug_ops.to_acknowledge_created_inferior = NULL;
+  rombug_ops.to_clone_and_follow_inferior = NULL;
+  rombug_ops.to_post_follow_inferior_by_clone = NULL;
+  rombug_ops.to_insert_fork_catchpoint = NULL;
+  rombug_ops.to_remove_fork_catchpoint = NULL;
+  rombug_ops.to_insert_vfork_catchpoint = NULL;
+  rombug_ops.to_remove_vfork_catchpoint = NULL;
+  rombug_ops.to_has_forked = NULL;
+  rombug_ops.to_has_vforked = NULL;
+  rombug_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  rombug_ops.to_post_follow_vfork = NULL;
+  rombug_ops.to_insert_exec_catchpoint = NULL;
+  rombug_ops.to_remove_exec_catchpoint = NULL;
+  rombug_ops.to_has_execd = NULL;
+  rombug_ops.to_reported_exec_events_per_exec_call = NULL;
+  rombug_ops.to_has_exited = NULL;
+  rombug_ops.to_mourn_inferior =   rombug_mourn_inferior;
+  rombug_ops.to_can_run  =   0;				/* can_run */
+  rombug_ops.to_notice_signals =   0; 				/* notice_signals */
+  rombug_ops.to_thread_alive  =   0;
+  rombug_ops.to_stop  =   0;				/* to_stop */
+  rombug_ops.to_pid_to_exec_file = NULL;
+  rombug_ops.to_core_file_to_sym_file = NULL;
+  rombug_ops.to_stratum =   process_stratum;
+  rombug_ops.DONT_USE =   0;				/* next */
+  rombug_ops.to_has_all_memory =   1;
+  rombug_ops.to_has_memory =   1;
+  rombug_ops.to_has_stack =   1;
+  rombug_ops.to_has_registers =   1;
+  rombug_ops.to_has_execution =   1;				/* has execution */
+  rombug_ops.to_sections =   0;
+  rombug_ops.to_sections_end =   0;				/* Section pointers */
+  rombug_ops.to_magic =   OPS_MAGIC;			/* Always the last thing */
+} 
+
+void
+_initialize_remote_os9k ()
+{
+  init_rombug_ops() ;
+  add_target (&rombug_ops);
+
+  add_show_from_set (
+        add_set_cmd ("hash", no_class, var_boolean, (char *)&hashmark,
+		"Set display of activity while downloading a file.\nWhen enabled, a period \'.\' is displayed.",
+                &setlist),
+	&showlist);
+
+  add_show_from_set (
+        add_set_cmd ("timeout", no_class, var_zinteger,
+                 (char *) &timeout,
+                 "Set timeout in seconds for remote MIPS serial I/O.",
+                 &setlist),
+        &showlist);
+
+  add_show_from_set (
+        add_set_cmd ("remotelog", no_class, var_zinteger,
+                 (char *) &monitor_log,
+                 "Set monitor activity log on(=1) or off(=0).",
+                 &setlist),
+        &showlist);
+
+  add_show_from_set (
+        add_set_cmd ("remotexon", no_class, var_zinteger,
+                 (char *) &tty_xon,
+                 "Set remote tty line XON control",
+                 &setlist),
+        &showlist);
+
+  add_show_from_set (
+        add_set_cmd ("remotexoff", no_class, var_zinteger,
+                 (char *) &tty_xoff,
+                 "Set remote tty line XOFF control",
+                 &setlist),
+        &showlist);
+
+  add_com ("rombug <command>", class_obscure, rombug_command,
+	   "Send a command to the debug monitor."); 
+#if 0
+  add_com ("connect", class_obscure, connect_command,
+   	   "Connect the terminal directly up to a serial based command monitor.\nUse <CR>~. or <CR>~^D to break out.");
+#endif
+}
diff --git a/gdb/remote-rdi.c b/gdb/remote-rdi.c
new file mode 100644
index 0000000..dba920e
--- /dev/null
+++ b/gdb/remote-rdi.c
@@ -0,0 +1,973 @@
+/* GDB interface to ARM RDI library.
+   Copyright 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "gdbthread.h"
+#include "gdbcore.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+
+#include "rdi-share/ardi.h"
+#include "rdi-share/adp.h"
+#include "rdi-share/hsys.h"
+
+extern int isascii PARAMS ((int));
+
+/* Prototypes for local functions */
+
+static void arm_rdi_files_info PARAMS ((struct target_ops *ignore));
+
+static int arm_rdi_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+				       int len, int should_write,
+				       struct target_ops *target));
+
+static void arm_rdi_prepare_to_store PARAMS ((void));
+
+static void arm_rdi_fetch_registers PARAMS ((int regno));
+
+static void arm_rdi_resume PARAMS ((int pid, int step,
+				   enum target_signal siggnal));
+
+static int arm_rdi_start_remote PARAMS ((char *dummy));
+
+static void arm_rdi_open PARAMS ((char *name, int from_tty));
+
+static void arm_rdi_create_inferior PARAMS ((char *exec_file, char *args,
+					     char **env));
+
+static void arm_rdi_close PARAMS ((int quitting));
+
+static void arm_rdi_store_registers PARAMS ((int regno));
+
+static void arm_rdi_mourn PARAMS ((void));
+
+static void arm_rdi_send PARAMS ((char *buf));
+
+static int arm_rdi_wait PARAMS ((int pid, struct target_waitstatus *status));
+
+static void arm_rdi_kill PARAMS ((void));
+
+static void arm_rdi_detach PARAMS ((char *args, int from_tty));
+
+static void arm_rdi_interrupt PARAMS ((int signo));
+
+static void arm_rdi_interrupt_twice PARAMS ((int signo));
+
+static void interrupt_query PARAMS ((void));
+
+static int arm_rdi_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int arm_rdi_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static char *rdi_error_message PARAMS ((int err));
+
+static enum target_signal rdi_error_signal PARAMS ((int err));
+
+/* Global variables.  */
+
+struct target_ops arm_rdi_ops;
+
+static struct Dbg_ConfigBlock gdb_config;
+
+static struct Dbg_HostosInterface gdb_hostif;
+
+static int max_load_size;
+
+static int execute_status;
+
+/* A little list of breakpoints that have been set.  */
+
+static struct local_bp_list_entry {
+  CORE_ADDR addr;
+  PointHandle point;
+  struct local_bp_list_entry *next;
+} *local_bp_list;
+
+
+/* Stub for catch_errors.  */
+
+static int
+arm_rdi_start_remote (dummy)
+     char *dummy;
+{
+  return 1;
+}
+
+/* Helper callbacks for the "host interface" structure.  RDI functions call
+   these to forward output from the target system and so forth.  */
+
+void
+voiddummy ()
+{
+  fprintf_unfiltered (gdb_stdout, "void dummy\n");
+}
+
+static void
+myprint (arg, format, ap)
+     PTR arg;
+     const char *format;
+     va_list ap;
+{
+  vfprintf_unfiltered (gdb_stdout, format, ap);
+}
+
+static void
+mywritec (arg, c)
+     PTR arg;
+     int c;
+{
+  if (isascii (c))
+    fputc_unfiltered (c, gdb_stdout);
+}
+
+static int
+mywrite (arg, buffer, len)
+     PTR arg;
+     char const *buffer;
+     int len;
+{
+  int i;
+  char *e;
+
+  e = (char *) buffer;
+  for (i = 0; i < len; i++)
+{
+      if (isascii ((int) *e))
+        {
+          fputc_unfiltered ((int) *e, gdb_stdout);
+          e++;
+        }
+}
+
+  return len;
+}
+
+static void
+mypause (arg)
+     PTR arg;
+{
+}
+
+/* These last two are tricky as we have to handle the special case of
+   being interrupted more carefully */
+
+static int
+myreadc (arg)
+     PTR arg;
+{ 
+  return fgetc (stdin);
+}
+
+static char *
+mygets (arg, buffer, len)
+     PTR arg;
+     char *buffer;
+     int len;
+{
+  return fgets(buffer, len, stdin);
+}
+
+/* Prevent multiple calls to angel_RDI_close().  */
+static int closed_already = 1;
+
+/* Open a connection to a remote debugger.  NAME is the filename used
+   for communication.  */
+
+static void
+arm_rdi_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  int rslt, i;
+  unsigned long arg1, arg2;
+
+  if (name == NULL)
+    error ("To open an RDI connection, you need to specify what serial\n\
+device is attached to the remote system (e.g. /dev/ttya).");
+
+  /* Make the basic low-level connection.  */
+
+  rslt = Adp_OpenDevice (name, NULL, 1);
+
+  if (rslt != adp_ok)
+    error ("Could not open device \"%s\"", name);
+
+  gdb_config.bytesex = 2 | (TARGET_BYTE_ORDER == BIG_ENDIAN ? 1 : 0);
+  gdb_config.fpe = 1;
+  gdb_config.rditype = 2;
+  gdb_config.heartbeat_on = 1;
+  gdb_config.flags = 2;
+
+  gdb_hostif.dbgprint = myprint;
+  gdb_hostif.dbgpause = mypause;
+  gdb_hostif.dbgarg = NULL;
+  gdb_hostif.writec = mywritec;
+  gdb_hostif.readc = myreadc;
+  gdb_hostif.write = mywrite;
+  gdb_hostif.gets = mygets;
+  gdb_hostif.hostosarg = NULL;
+  gdb_hostif.reset = voiddummy;
+
+  rslt = angel_RDI_open (10, &gdb_config, &gdb_hostif, NULL);
+  if (rslt == RDIError_BigEndian || rslt == RDIError_LittleEndian)
+    ;  /* do nothing, this is the expected return */
+  else if (rslt)
+    {
+      printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
+    }
+
+  rslt = angel_RDI_info (RDIInfo_Target, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  rslt = angel_RDI_info (RDIInfo_Points, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  rslt = angel_RDI_info (RDIInfo_Step, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  rslt = angel_RDI_info (RDIInfo_CoPro, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  rslt = angel_RDI_info (RDIInfo_SemiHosting, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+
+  rslt = angel_RDI_info (RDIInfo_GetLoadSize, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  max_load_size = arg1;
+
+  push_target (&arm_rdi_ops);
+
+  target_fetch_registers (-1);
+
+  rslt = angel_RDI_open (1, &gdb_config, NULL, NULL);
+  if (rslt)
+    {
+      printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
+    }
+
+  arg1 = 0x13b;
+  rslt = angel_RDI_info (RDIVector_Catch, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+
+  arg1 = (unsigned long) "";
+  rslt = angel_RDI_info (RDISet_Cmdline, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+
+  /* Clear out any existing records of breakpoints.  */
+  {
+    struct local_bp_list_entry *entry, *preventry = NULL;
+
+    for (entry = local_bp_list; entry != NULL; entry = entry->next)
+      {
+	if (preventry)
+	  free (preventry);
+      }
+  }
+
+  printf_filtered ("Connected to ARM RDI target.\n");
+  closed_already = 0;
+  inferior_pid = 42;
+}
+
+/* Start an inferior process and set inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().
+   On VxWorks and various standalone systems, we ignore exec_file.  */
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+
+static void
+arm_rdi_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  int len, rslt;
+  unsigned long arg1, arg2;
+  char *arg_buf;
+  CORE_ADDR entry_point;
+
+  if (exec_file == 0 || exec_bfd == 0)
+   error ("No executable file specified.");
+
+  entry_point = (CORE_ADDR) bfd_get_start_address (exec_bfd);
+
+  arm_rdi_kill ();	 
+  remove_breakpoints ();
+  init_wait_for_inferior ();
+
+  len = strlen (exec_file) + 1 + strlen (args) + 1 + /*slop*/ 10;
+  arg_buf = (char *) alloca (len);
+  arg_buf[0] = '\0';
+  strcat (arg_buf, exec_file);
+  strcat (arg_buf, " ");
+  strcat (arg_buf, args);
+
+  inferior_pid = 42;
+  insert_breakpoints ();  /* Needed to get correct instruction in cache */
+
+  if (env != NULL)
+    {
+      while (*env)
+	{
+	  if (strncmp (*env, "MEMSIZE=", sizeof ("MEMSIZE=") - 1) == 0)
+	    {
+	      unsigned long top_of_memory;
+	      char *end_of_num;
+
+	      /* Set up memory limit */
+	      top_of_memory = strtoul (*env + sizeof ("MEMSIZE=") - 1,
+				       &end_of_num, 0);
+	      printf_filtered ("Setting top-of-memory to 0x%x\n",
+			       top_of_memory);
+	  
+	      rslt = angel_RDI_info (RDIInfo_SetTopMem, &top_of_memory, &arg2);
+	      if (rslt)
+		{
+		  printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+		}
+	    }
+	  env++;
+	}
+    }
+
+  arg1 = (unsigned long) arg_buf;
+  rslt = angel_RDI_info (RDISet_Cmdline, /* &arg1 */ (unsigned long *)arg_buf, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+
+  proceed (entry_point, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* This takes a program previously attached to and detaches it.  After
+   this is done, GDB can be used to debug some other program.  We
+   better not have left any breakpoints in the target program or it'll
+   die when it hits one.  */
+
+static void
+arm_rdi_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  pop_target ();
+}
+
+/* Clean up connection to a remote debugger.  */
+
+static void
+arm_rdi_close (quitting)
+     int quitting;
+{
+  int rslt;
+
+  if (! closed_already)
+    {
+      rslt = angel_RDI_close ();
+      if (rslt)
+	{
+	  printf_filtered ("RDI_close: %s\n", rdi_error_message (rslt));
+	}
+      closed_already = 1;
+      inferior_pid = 0;
+    }
+}
+
+/* Tell the remote machine to resume.  */
+
+static void
+arm_rdi_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  int rslt;
+  PointHandle point;
+
+  if (0 /* turn on when hardware supports single-stepping */)
+    {
+      rslt = angel_RDI_step (1, &point);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_step: %s\n", rdi_error_message (rslt));
+	}
+    }
+  else
+    {
+      char handle[4];
+      CORE_ADDR pc;
+
+      if (step)
+	{
+	  pc = read_register (PC_REGNUM);
+	  pc = arm_get_next_pc (pc);
+	  arm_rdi_insert_breakpoint (pc, handle);
+	}
+      execute_status = rslt = angel_RDI_execute (&point);
+      if (rslt == RDIError_BreakpointReached)
+	;
+      else if (rslt)
+	{
+	  printf_filtered ("RDI_execute: %s\n", rdi_error_message (rslt));
+	}
+      if (step)
+	{
+	  arm_rdi_remove_breakpoint (pc, handle);
+	}
+    }
+}
+
+/* Send ^C to target to halt it.  Target will respond, and send us a
+   packet.  */
+
+static void
+arm_rdi_interrupt (signo)
+     int signo;
+{
+}
+
+static void (*ofunc)();
+
+/* The user typed ^C twice.  */
+static void
+arm_rdi_interrupt_twice (signo)
+     int signo;
+{
+}
+
+/* Ask the user what to do when an interrupt is received.  */
+
+static void
+interrupt_query ()
+{
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+   STATUS just as `wait' would.  Returns "pid" (though it's not clear
+   what, if anything, that means in the case of this target).  */
+
+static int
+arm_rdi_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  status->kind = (execute_status == RDIError_NoError ?
+    TARGET_WAITKIND_EXITED : TARGET_WAITKIND_STOPPED);
+
+  /* convert stopped code from target into right signal */
+  status->value.sig = rdi_error_signal (execute_status);
+
+  return inferior_pid;
+}
+
+/* Read the remote registers into the block REGS.  */
+
+/* ARGSUSED */
+static void
+arm_rdi_fetch_registers (regno)
+     int regno;
+{
+  int rslt, rdi_regmask;
+  unsigned long rawreg, rawregs[32];
+  char cookedreg[4];
+
+  if (regno == -1) 
+    {
+      rslt = angel_RDI_CPUread (255, 0x27fff, rawregs);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_CPUread: %s\n", rdi_error_message (rslt));
+	}
+
+      for (regno = 0; regno < 15; regno++)
+	{
+	  store_unsigned_integer (cookedreg, 4, rawregs[regno]);
+	  supply_register (regno, (char *) cookedreg);
+	}
+      store_unsigned_integer (cookedreg, 4, rawregs[15]);
+      supply_register (PS_REGNUM, (char *) cookedreg);
+      arm_rdi_fetch_registers (PC_REGNUM);
+    }
+  else
+    {
+      if (regno == PC_REGNUM)
+	rdi_regmask = RDIReg_PC;
+      else if (regno == PS_REGNUM)
+	rdi_regmask = RDIReg_CPSR;
+      else if (regno < 0 || regno > 15)
+	{
+	  rawreg = 0;
+	  supply_register (regno, (char *) &rawreg);
+	  return;
+	}
+      else
+	rdi_regmask = 1 << regno;
+
+      rslt = angel_RDI_CPUread (255, rdi_regmask, &rawreg);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_CPUread: %s\n", rdi_error_message (rslt));
+	}
+      store_unsigned_integer (cookedreg, 4, rawreg);
+      supply_register (regno, (char *) cookedreg);
+    }
+}
+
+static void 
+arm_rdi_prepare_to_store ()
+{
+  /* Nothing to do.  */
+}
+
+/* Store register REGNO, or all registers if REGNO == -1, from the contents
+   of REGISTERS.  FIXME: ignores errors.  */
+
+static void
+arm_rdi_store_registers (regno)
+     int regno;
+{
+  int rslt, rdi_regmask;
+
+  /* These need to be able to take 'floating point register' contents */
+  unsigned long rawreg[3], rawerreg[3];
+
+  if (regno  == -1) 
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	arm_rdi_store_registers (regno);
+    }
+  else
+    {
+      read_register_gen (regno, (char *) rawreg);
+      /* RDI manipulates data in host byte order, so convert now. */
+      store_unsigned_integer (rawerreg, 4, rawreg[0]);
+
+      if (regno == PC_REGNUM)
+	rdi_regmask = RDIReg_PC;
+      else if (regno == PS_REGNUM)
+	rdi_regmask = RDIReg_CPSR;
+      else if (regno < 0 || regno > 15)
+	return;
+      else
+	rdi_regmask = 1 << regno;
+
+      rslt = angel_RDI_CPUwrite (255, rdi_regmask, rawerreg);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_CPUwrite: %s\n", rdi_error_message (rslt));
+	}
+    }
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR,
+   transferring to or from debugger address MYADDR.  Write to inferior
+   if SHOULD_WRITE is nonzero.  Returns length of data written or
+   read; 0 for error.  */
+
+/* ARGSUSED */
+static int
+arm_rdi_xfer_memory(memaddr, myaddr, len, should_write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+     struct target_ops *target;			/* ignored */
+{
+  int rslt, i;
+
+  if (should_write)
+    {
+      rslt = angel_RDI_write (myaddr, memaddr, &len);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_write: %s\n", rdi_error_message (rslt));
+	}
+    }
+  else 
+    {
+      rslt = angel_RDI_read (memaddr, myaddr, &len);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_read: %s\n", rdi_error_message (rslt));
+	  len = 0;
+	}
+    }
+  return len;
+}
+
+/* Display random info collected from the target.  */
+
+static void
+arm_rdi_files_info (ignore)
+     struct target_ops *ignore;
+{
+  char *file = "nothing";
+  int rslt;
+  unsigned long arg1, arg2;
+
+  rslt = angel_RDI_info (RDIInfo_Target, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  if (arg1 & (1 << 15))
+    printf_filtered ("Target supports Thumb code.\n");
+  if (arg1 & (1 << 14))
+    printf_filtered ("Target can do profiling.\n");
+  if (arg1 & (1 << 4))
+    printf_filtered ("Target is real hardware.\n");
+  
+  rslt = angel_RDI_info (RDIInfo_Step, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  printf_filtered ("Target can%s single-step.\n", (arg1 & 0x4 ? "" : "not"));
+
+  rslt = angel_RDI_info (RDIInfo_Icebreaker, &arg1, &arg2);
+  if (rslt)
+    {
+      printf_filtered ("RDI_info: %s\n", rdi_error_message (rslt));
+    }
+  else
+    printf_filtered ("Target includes an EmbeddedICE.\n");
+}
+
+static void
+arm_rdi_kill ()
+{
+  int rslt;
+
+  rslt = angel_RDI_open (1, &gdb_config, NULL, NULL);
+  if (rslt)
+    {
+      printf_filtered ("RDI_open: %s\n", rdi_error_message (rslt));
+    }
+}
+
+static void
+arm_rdi_mourn_inferior ()
+{
+  unpush_target (&arm_rdi_ops);
+  generic_mourn_inferior ();
+}
+
+/* While the RDI library keeps track of its own breakpoints, we need
+   to remember "handles" so that we can delete them later.  Since
+   breakpoints get used for stepping, be careful not to leak memory
+   here.  */
+
+static int
+arm_rdi_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int rslt;
+  PointHandle point;
+  struct local_bp_list_entry *entry;
+  int type = RDIPoint_EQ;
+
+  if (arm_pc_is_thumb (addr) || arm_pc_is_thumb_dummy (addr))
+    type |= RDIPoint_16Bit;
+  rslt = angel_RDI_setbreak (addr, type, 0, &point);
+  if (rslt)
+    {
+      printf_filtered ("RDI_setbreak: %s\n", rdi_error_message (rslt));
+    }
+  entry =
+    (struct local_bp_list_entry *) xmalloc (sizeof (struct local_bp_list_entry));
+  entry->addr = addr;
+  entry->point = point;
+  entry->next = local_bp_list;
+  local_bp_list = entry;
+  return rslt;
+}
+
+static int
+arm_rdi_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int rslt;
+  PointHandle point;
+  struct local_bp_list_entry *entry, *preventry;
+
+  for (entry = local_bp_list; entry != NULL; entry = entry->next)
+    {
+      if (entry->addr == addr)
+	{
+	  break;
+	}
+      preventry = entry;
+    }
+  if (entry)
+    {
+      rslt = angel_RDI_clearbreak (entry->point);
+      if (rslt)
+	{
+	  printf_filtered ("RDI_clearbreak: %s\n", rdi_error_message (rslt));
+	}
+      /* Delete the breakpoint entry locally.  */
+      if (entry == local_bp_list)
+	{
+	  local_bp_list = entry->next;
+	}
+      else
+	{
+	  preventry->next = entry->next;
+	}
+      free (entry);
+    }
+  return 0;
+}
+
+static char *
+rdi_error_message (err)
+     int err;
+{
+  switch (err)
+    {
+    case RDIError_NoError: 
+      return "no error";
+    case RDIError_Reset:
+      return "debuggee reset";
+    case RDIError_UndefinedInstruction:
+      return "undefined instruction";
+    case RDIError_SoftwareInterrupt:
+      return "SWI trapped";
+    case RDIError_PrefetchAbort:
+      return "prefetch abort, execution ran into unmapped memory?";
+    case RDIError_DataAbort:
+      return "data abort, no memory at specified address?";
+    case RDIError_AddressException:
+      return "address exception, access >26bit in 26bit mode";
+    case RDIError_IRQ:
+      return "IRQ, interrupt trapped";
+    case RDIError_FIQ:
+      return "FIQ, fast interrupt trapped";
+    case RDIError_Error:
+      return "a miscellaneous type of error";
+    case RDIError_BranchThrough0:
+      return "branch through location 0";
+    case RDIError_NotInitialised:
+      return "internal error, RDI_open not called first";
+    case RDIError_UnableToInitialise:
+      return "internal error, target world is broken";
+    case RDIError_WrongByteSex:
+      return "See Operator: WrongByteSex";
+    case RDIError_UnableToTerminate:
+      return "See Operator: Unable to Terminate";
+    case RDIError_BadInstruction:
+      return "bad instruction, illegal to execute this instruction";
+    case RDIError_IllegalInstruction:
+      return "illegal instruction, the effect of executing it is undefined";
+    case RDIError_BadCPUStateSetting:
+      return "internal error, tried to set SPSR of user mode";
+    case RDIError_UnknownCoPro:
+      return "unknown co-processor";
+    case RDIError_UnknownCoProState:
+      return "cannot execute co-processor request";
+    case RDIError_BadCoProState:
+      return "recognizably broken co-processor request";
+    case RDIError_BadPointType:
+      return "internal error, bad point yype";
+    case RDIError_UnimplementedType:
+      return "internal error, unimplemented type";
+    case RDIError_BadPointSize:
+      return "internal error, bad point size";
+    case RDIError_UnimplementedSize:
+      return "internal error, unimplemented size";
+    case RDIError_NoMorePoints:
+      return "last break/watch point was used";
+    case RDIError_BreakpointReached:
+      return "breakpoint reached";
+    case RDIError_WatchpointAccessed:
+      return "watchpoint accessed";
+    case RDIError_NoSuchPoint:
+      return "attempted to clear non-existent break/watch point";
+    case RDIError_ProgramFinishedInStep:
+      return "end of the program reached while stepping";
+    case RDIError_UserInterrupt:
+      return "you pressed Escape";
+    case RDIError_CantSetPoint:
+      return "no more break/watch points available";
+    case RDIError_IncompatibleRDILevels:
+      return "incompatible RDI levels";
+    case RDIError_LittleEndian:
+      return "debuggee is little endian";
+    case RDIError_BigEndian:
+      return "debuggee is big endian";
+    case RDIError_SoftInitialiseError:
+      return "recoverable error in RDI initialization";
+    case RDIError_InsufficientPrivilege:
+      return "internal error, supervisor state not accessible to monitor";
+    case RDIError_UnimplementedMessage:
+      return "internal error, unimplemented message";
+    case RDIError_UndefinedMessage:
+      return "internal error, undefined message";
+    default:
+      return "undefined error message, should reset target"; 
+    }
+}
+
+/* Convert the ARM error messages to signals that GDB knows about.  */
+
+static enum target_signal
+rdi_error_signal (err)
+     int err;
+{
+  switch (err)
+    {
+    case RDIError_NoError:
+      return 0;
+    case RDIError_Reset:
+      return TARGET_SIGNAL_TERM; /* ??? */
+    case RDIError_UndefinedInstruction:
+      return TARGET_SIGNAL_ILL;
+    case RDIError_SoftwareInterrupt:
+    case RDIError_PrefetchAbort:
+    case RDIError_DataAbort:
+      return TARGET_SIGNAL_TRAP;
+    case RDIError_AddressException:
+      return TARGET_SIGNAL_SEGV;
+    case RDIError_IRQ:
+    case RDIError_FIQ:
+      return TARGET_SIGNAL_TRAP;
+    case RDIError_Error:
+      return TARGET_SIGNAL_TERM;
+    case RDIError_BranchThrough0:
+      return TARGET_SIGNAL_TRAP;
+    case RDIError_NotInitialised:
+    case RDIError_UnableToInitialise:
+    case RDIError_WrongByteSex:
+    case RDIError_UnableToTerminate:
+      return TARGET_SIGNAL_UNKNOWN;
+    case RDIError_BadInstruction:
+    case RDIError_IllegalInstruction:
+      return TARGET_SIGNAL_ILL;
+    case RDIError_BadCPUStateSetting:
+    case RDIError_UnknownCoPro:
+    case RDIError_UnknownCoProState:
+    case RDIError_BadCoProState:
+    case RDIError_BadPointType:
+    case RDIError_UnimplementedType:
+    case RDIError_BadPointSize:
+    case RDIError_UnimplementedSize:
+    case RDIError_NoMorePoints:
+      return TARGET_SIGNAL_UNKNOWN;
+    case RDIError_BreakpointReached:
+    case RDIError_WatchpointAccessed:
+      return TARGET_SIGNAL_TRAP;
+    case RDIError_NoSuchPoint:
+    case RDIError_ProgramFinishedInStep:
+      return TARGET_SIGNAL_UNKNOWN;
+    case RDIError_UserInterrupt:
+      return TARGET_SIGNAL_INT;
+    case RDIError_IncompatibleRDILevels:
+    case RDIError_LittleEndian:
+    case RDIError_BigEndian:
+    case RDIError_SoftInitialiseError:
+    case RDIError_InsufficientPrivilege:
+    case RDIError_UnimplementedMessage:
+    case RDIError_UndefinedMessage:
+    default:
+      return TARGET_SIGNAL_UNKNOWN; 
+    }
+}
+
+/* Define the target operations structure.  */
+
+static void
+init_rdi_ops ()
+{
+  arm_rdi_ops.to_shortname = "rdi";	
+  arm_rdi_ops.to_longname = "ARM RDI";
+  arm_rdi_ops.to_doc = "Use a remote ARM-based computer; via the RDI library.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya)." ; 
+  arm_rdi_ops.to_open = arm_rdi_open;		
+  arm_rdi_ops.to_close = arm_rdi_close;	
+  arm_rdi_ops.to_detach = arm_rdi_detach;	
+  arm_rdi_ops.to_resume = arm_rdi_resume;	
+  arm_rdi_ops.to_wait = arm_rdi_wait;	
+  arm_rdi_ops.to_fetch_registers = arm_rdi_fetch_registers;
+  arm_rdi_ops.to_store_registers = arm_rdi_store_registers;
+  arm_rdi_ops.to_prepare_to_store = arm_rdi_prepare_to_store;
+  arm_rdi_ops.to_xfer_memory = arm_rdi_xfer_memory;
+  arm_rdi_ops.to_files_info = arm_rdi_files_info;
+  arm_rdi_ops.to_insert_breakpoint = arm_rdi_insert_breakpoint;
+  arm_rdi_ops.to_remove_breakpoint = arm_rdi_remove_breakpoint;	
+  arm_rdi_ops.to_kill = arm_rdi_kill;		
+  arm_rdi_ops.to_load = generic_load;		
+  arm_rdi_ops.to_create_inferior = arm_rdi_create_inferior;
+  arm_rdi_ops.to_mourn_inferior = arm_rdi_mourn_inferior;
+  arm_rdi_ops.to_stratum = process_stratum;
+  arm_rdi_ops.to_has_all_memory = 1;	
+  arm_rdi_ops.to_has_memory = 1;	
+  arm_rdi_ops.to_has_stack = 1;	
+  arm_rdi_ops.to_has_registers = 1;	
+  arm_rdi_ops.to_has_execution = 1;	
+  arm_rdi_ops.to_magic = OPS_MAGIC;	
+}
+
+void
+_initialize_remote_rdi ()
+{
+  init_rdi_ops () ;
+  add_target (&arm_rdi_ops);
+}
+
+/* A little dummy to make linking with the library succeed. */
+
+int Fail() { return 0; }
diff --git a/gdb/remote-rdp.c b/gdb/remote-rdp.c
new file mode 100644
index 0000000..1d596a4
--- /dev/null
+++ b/gdb/remote-rdp.c
@@ -0,0 +1,1512 @@
+/* Remote debugging for the ARM RDP interface.
+   Copyright 1994, 1995 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+
+ */
+
+
+/* 
+   Much of this file (in particular the SWI stuff) is based on code by
+   David Taylor (djt1000@uk.ac.cam.hermes).
+
+   I hacked on and simplified it by removing a lot of sexy features he
+   had added, and some of the (unix specific) workarounds he'd done
+   for other GDB problems - which if they still exist should be fixed
+   in GDB, not in a remote-foo thing .  I also made it conform more to
+   the doc I have; which may be wrong.
+
+   Steve Chamberlain (sac@cygnus.com).
+ */
+
+
+#include "defs.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include "callback.h"
+#include "command.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <ctype.h>
+#include <fcntl.h>
+#include "symfile.h"
+#include "remote-utils.h"
+#include "gdb_string.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include "gdbcore.h"
+
+
+extern struct target_ops remote_rdp_ops;
+static serial_t io;
+static host_callback *callback = &default_callback;
+
+struct
+  {
+    int step_info;
+    int break_info;
+    int model_info;
+    int target_info;
+    int can_step;
+    char command_line[10];
+    int rdi_level;
+    int rdi_stopped_status;
+  }
+ds;
+
+
+
+/* Definitions for the RDP protocol. */
+
+#define RDP_MOUTHFULL   		(1<<6)
+#define FPU_COPRO_NUMBER 		1
+
+#define RDP_OPEN 	 		0
+#define RDP_OPEN_TYPE_COLD 		0
+#define RDP_OPEN_TYPE_WARM 		1
+#define RDP_OPEN_TYPE_BAUDRATE          2
+
+#define RDP_OPEN_BAUDRATE_9600       	1
+#define RDP_OPEN_BAUDRATE_19200        	2
+#define RDP_OPEN_BAUDRATE_38400        	3
+
+#define RDP_OPEN_TYPE_RETURN_SEX	(1<<3)
+
+#define RDP_CLOSE 			1
+
+#define RDP_MEM_READ 			2
+
+#define RDP_MEM_WRITE 			3
+
+#define RDP_CPU_READ 			4
+#define RDP_CPU_WRITE 			5
+#define RDP_CPU_READWRITE_MODE_CURRENT 255
+#define RDP_CPU_READWRITE_MASK_PC 	(1<<16)
+#define RDP_CPU_READWRITE_MASK_CPSR 	(1<<17)
+#define RDP_CPU_READWRITE_MASK_SPSR 	(1<<18)
+
+#define RDP_COPRO_READ   		6
+#define RDP_COPRO_WRITE 		7
+#define RDP_FPU_READWRITE_MASK_FPS 	(1<<8)
+
+#define RDP_SET_BREAK			0xa
+#define RDP_SET_BREAK_TYPE_PC_EQUAL     0
+#define RDP_SET_BREAK_TYPE_GET_HANDLE   (0x10)
+
+#define RDP_CLEAR_BREAK 		0xb
+
+#define RDP_EXEC 			0x10
+#define RDP_EXEC_TYPE_SYNC 		0
+
+#define RDP_STEP 			0x11
+
+#define RDP_INFO  			0x12
+#define RDP_INFO_ABOUT_STEP 		2
+#define RDP_INFO_ABOUT_STEP_GT_1	1
+#define RDP_INFO_ABOUT_STEP_TO_JMP 	2
+#define RDP_INFO_ABOUT_STEP_1		4
+#define RDP_INFO_ABOUT_TARGET 		0
+#define RDP_INFO_ABOUT_BREAK 		1
+#define RDP_INFO_ABOUT_BREAK_COMP	1
+#define RDP_INFO_ABOUT_BREAK_RANGE 	2
+#define RDP_INFO_ABOUT_BREAK_BYTE_READ 	4
+#define RDP_INFO_ABOUT_BREAK_HALFWORD_READ 8
+#define RDP_INFO_ABOUT_BREAK_WORD_READ (1<<4)
+#define RDP_INFO_ABOUT_BREAK_BYTE_WRITE (1<<5)
+#define RDP_INFO_ABOUT_BREAK_HALFWORD_WRITE (1<<6)
+#define RDP_INFO_ABOUT_BREAK_WORD_WRITE (1<<7)
+#define RDP_INFO_ABOUT_BREAK_MASK 	(1<<8)
+#define RDP_INFO_ABOUT_BREAK_THREAD_BREAK (1<<9)
+#define RDP_INFO_ABOUT_BREAK_THREAD_WATCH (1<<10)
+#define RDP_INFO_ABOUT_BREAK_COND 	(1<<11)
+#define RDP_INFO_VECTOR_CATCH		(0x180)
+#define RDP_INFO_ICEBREAKER		(7)
+#define RDP_INFO_SET_CMDLINE            (0x300)
+
+#define RDP_SELECT_CONFIG		(0x16)
+#define RDI_ConfigCPU			0
+#define RDI_ConfigSystem		1
+#define RDI_MatchAny			0
+#define RDI_MatchExactly		1
+#define RDI_MatchNoEarlier		2
+
+#define RDP_RESET 			0x7f
+
+/* Returns from RDP */
+#define RDP_RES_STOPPED 		0x20
+#define RDP_RES_SWI 			0x21
+#define RDP_RES_FATAL 			0x5e
+#define RDP_RES_VALUE 			0x5f
+#define RDP_RES_VALUE_LITTLE_ENDIAN     240
+#define RDP_RES_VALUE_BIG_ENDIAN 	241
+#define RDP_RES_RESET			0x7f
+#define RDP_RES_AT_BREAKPOINT    	143
+#define RDP_RES_IDUNNO			0xe6
+#define RDP_OSOpReply           	0x13
+#define RDP_OSOpWord            	2
+#define RDP_OSOpNothing         	0
+
+static int timeout = 2;
+
+static char * commandline = NULL;
+
+static int
+remote_rdp_xfer_inferior_memory PARAMS ((CORE_ADDR memaddr,
+					 char *myaddr,
+					 int len,
+					 int write,
+					 struct target_ops * target));
+
+
+/* Stuff for talking to the serial layer. */
+
+static unsigned char
+get_byte ()
+{
+  int c = SERIAL_READCHAR (io, timeout);
+
+  if (remote_debug)
+    printf ("[%02x]\n", c);
+
+  if (c == SERIAL_TIMEOUT)
+    {
+      if (timeout == 0)
+	return (unsigned char) c;
+
+      error ("Timeout reading from remote_system");
+    }
+
+  return c;
+}
+
+/* Note that the target always speaks little-endian to us,
+   even if it's a big endian machine. */
+static unsigned int
+get_word ()
+{
+  unsigned int val = 0;
+  unsigned int c;
+  int n;
+  for (n = 0; n < 4; n++)
+    {
+      c = get_byte ();
+      val |= c << (n * 8);
+    }
+  return val;
+}
+
+static void
+put_byte (val)
+     char val;
+{
+  if (remote_debug)
+    printf ("(%02x)\n", val);
+  SERIAL_WRITE (io, &val, 1);
+}
+
+static void
+put_word (val)
+     int val;
+{
+  /* We always send in little endian */
+  unsigned char b[4];
+  b[0] = val;
+  b[1] = val >> 8;
+  b[2] = val >> 16;
+  b[3] = val >> 24;
+
+  if (remote_debug)
+    printf ("(%04x)", val);
+
+  SERIAL_WRITE (io, b, 4);
+}
+
+
+
+/* Stuff for talking to the RDP layer. */
+
+/* This is a bit more fancy that need be so that it syncs even in nasty cases.
+
+   I'be been unable to make it reliably sync up with the change
+   baudrate open command.  It likes to sit and say it's been reset,
+   with no more action.  So I took all that code out.  I'd rather sync
+   reliably at 9600 than wait forever for a possible 19200 connection.
+
+ */
+static void
+rdp_init (cold, tty)
+     int cold;
+     int tty;
+{
+  int sync = 0;
+  int type = cold ? RDP_OPEN_TYPE_COLD : RDP_OPEN_TYPE_WARM;
+  int baudtry = 9600;
+
+  time_t now = time (0);
+  time_t stop_time = now + 10;	/* Try and sync for 10 seconds, then give up */
+
+
+  while (time (0) < stop_time && !sync)
+    {
+      int restype;
+      QUIT;
+
+      SERIAL_FLUSH_INPUT (io);
+      SERIAL_FLUSH_OUTPUT (io);
+
+      if (tty)
+	printf_unfiltered ("Trying to connect at %d baud.\n", baudtry);
+
+      /*
+      ** It seems necessary to reset an EmbeddedICE to get it going.
+      ** This has the side benefit of displaying the startup banner.
+      */
+      if (cold)
+	{
+	  put_byte (RDP_RESET);
+	  while ((restype = SERIAL_READCHAR (io, 1)) > 0)
+	    {
+	      switch (restype)
+		{
+		case SERIAL_TIMEOUT:
+		  break;
+		case RDP_RESET:
+		  /* Sent at start of reset process: ignore */
+		  break;
+		default:
+		  printf_unfiltered ("%c", isgraph (restype) ? restype : ' ');
+		  break;
+		}
+	    }
+
+	  if (restype == 0)
+	    {
+	      /* Got end-of-banner mark */
+	      printf_filtered ("\n");
+	    }
+	}
+
+      put_byte (RDP_OPEN);
+
+      put_byte (type | RDP_OPEN_TYPE_RETURN_SEX );
+      put_word (0);
+
+      while (!sync && (restype = SERIAL_READCHAR (io, 1)) > 0)
+	{
+	  if (remote_debug)
+	    printf_unfiltered ("[%02x]\n", restype);
+
+	  switch (restype)
+	    {
+	    case SERIAL_TIMEOUT:
+	      break;
+
+	    case RDP_RESET:
+	      while ((restype = SERIAL_READCHAR (io, 1)) == RDP_RESET)
+		;
+	      do
+		{
+		  printf_unfiltered ("%c", isgraph (restype) ? restype : ' ');
+		}
+	      while ((restype = SERIAL_READCHAR (io, 1)) > 0);
+
+	      if (tty)
+		{
+		  printf_unfiltered ("\nThe board has sent notification that it was reset.\n");
+		  printf_unfiltered ("Waiting for it to settle down...\n");
+		}
+	      sleep (3);
+	      if (tty)
+		printf_unfiltered ("\nTrying again.\n");
+	      cold = 0;
+	      break;
+
+	    default:
+	      break;
+
+	    case RDP_RES_VALUE:
+	      {
+		int resval = SERIAL_READCHAR (io, 1);
+
+		if (remote_debug)
+		  printf_unfiltered ("[%02x]\n", resval);
+
+		switch (resval)
+		  {
+		  case SERIAL_TIMEOUT:
+		    break;
+		  case RDP_RES_VALUE_LITTLE_ENDIAN:
+		    target_byte_order = LITTLE_ENDIAN;
+		    sync = 1;
+		    break;
+		  case RDP_RES_VALUE_BIG_ENDIAN:
+		    target_byte_order = BIG_ENDIAN;
+		    sync = 1;
+		    break;
+		  default:
+		    break;
+		  }
+	      }
+	    }
+	}
+    }
+
+  if (!sync)
+    {
+      error ("Couldn't reset the board, try pressing the reset button");
+    }
+}
+
+
+#ifdef ANSI_PROTOTYPES
+void
+send_rdp (char *template,...)
+#else
+void
+send_rdp (char *template, va_alist)
+     va_dcl
+#endif
+{
+  char buf[200];
+  char *dst = buf;
+  va_list alist;
+#ifdef ANSI_PROTOTYPES
+  va_start (alist, template);
+#else
+  va_start (alist);
+#endif
+
+  while (*template)
+    {
+      unsigned int val;
+      int *pi;
+      int *pstat;
+      char *pc;
+      int i;
+      switch (*template++)
+	{
+	case 'b':
+	  val = va_arg (alist, int);
+	  *dst++ = val;
+	  break;
+	case 'w':
+	  val = va_arg (alist, int);
+	  *dst++ = val;
+	  *dst++ = val >> 8;
+	  *dst++ = val >> 16;
+	  *dst++ = val >> 24;
+	  break;
+	case 'S':
+	  val = get_byte ();
+	  if (val != RDP_RES_VALUE)
+	    {
+	      printf_unfiltered ("got bad res value of %d, %x\n", val, val);
+	    }
+	  break;
+	case 'V':
+	  pstat = va_arg (alist, int *);
+	  pi = va_arg (alist, int *);
+
+	  *pstat = get_byte ();
+	  /* Check the result was zero, if not read the syndrome */
+	  if (*pstat)
+	    {
+	      *pi = get_word ();
+	    }
+	  break;
+	case 'Z':
+	  /* Check the result code */
+	  switch (get_byte ())
+	    {
+	    case 0:
+	      /* Success */
+	      break;
+	    case 253:
+	      /* Target can't do it; never mind */
+	      printf_unfiltered ("RDP: Insufficient privilege\n");
+	      return;
+	    case 254:
+	      /* Target can't do it; never mind */
+	      printf_unfiltered ("RDP: Unimplemented message\n");
+	      return;
+	    case 255:
+	      error ("Command garbled");
+	      break;
+	    default:
+	      error ("Corrupt reply from target");
+	      break;
+	    }
+	  break;
+	case 'W':
+	  /* Read a word from the target */
+	  pi = va_arg (alist, int *);
+	  *pi = get_word ();
+	  break;
+	case 'P':
+	  /* Read in some bytes from the target. */
+	  pc = va_arg (alist, char *);
+	  val = va_arg (alist, int);
+	  for (i = 0; i < val; i++)
+	    {
+	      pc[i] = get_byte ();
+	    }
+	  break;
+	case 'p':
+	  /* send what's being pointed at */
+	  pc = va_arg (alist, char *);
+	  val = va_arg (alist, int);
+	  dst = buf;
+	  SERIAL_WRITE (io, pc, val);
+	  break;
+	case '-':
+	  /* Send whats in the queue */
+	  if (dst != buf)
+	    {
+	      SERIAL_WRITE (io, buf, dst - buf);
+	      dst = buf;
+	    }
+	  break;
+	case 'B':
+	  pi = va_arg (alist, int *);
+	  *pi = get_byte ();
+	  break;
+	default:
+	  abort ();
+	}
+    }
+  va_end (args);
+
+  if (dst != buf)
+    abort ();
+}
+
+
+static int
+rdp_write (memaddr, buf, len)
+     CORE_ADDR memaddr;
+     char *buf;
+     int len;
+{
+  int res;
+  int val;
+
+  send_rdp ("bww-p-SV", RDP_MEM_WRITE, memaddr, len, buf, len, &res, &val);
+
+  if (res)
+    {
+      return val;
+    }
+  return len;
+}
+
+
+static int
+rdp_read (memaddr, buf, len)
+     CORE_ADDR memaddr;
+     char *buf;
+     int len;
+{
+  int res;
+  int val;
+  send_rdp ("bww-S-P-V",
+	    RDP_MEM_READ, memaddr, len,
+	    buf, len,
+	    &res, &val);
+  if (res)
+    {
+      return val;
+    }
+  return len;
+}
+
+static void
+rdp_fetch_one_register (mask, buf)
+     int mask;
+     char *buf;
+{
+  int val;
+  send_rdp ("bbw-SWZ", RDP_CPU_READ, RDP_CPU_READWRITE_MODE_CURRENT, mask, &val);
+  store_signed_integer (buf, 4, val);
+}
+
+static void
+rdp_fetch_one_fpu_register (mask, buf)
+     int mask;
+     char *buf;
+{
+#if 0
+  /* !!! Since the PIE board doesn't work as documented,
+     and it doesn't have FPU hardware anyway and since it
+     slows everything down, I've disabled this. */
+  int val;
+  if (mask == RDP_FPU_READWRITE_MASK_FPS)
+    {
+      /* this guy is only a word */
+      send_rdp ("bbw-SWZ", RDP_COPRO_READ, FPU_COPRO_NUMBER, mask, &val);
+      store_signed_integer (buf, 4, val);
+    }
+  else
+    {
+      /* There are 12 bytes long 
+         !! fixme about endianness 
+       */
+      int dummy;		/* I've seen these come back as four words !! */
+      send_rdp ("bbw-SWWWWZ", RDP_COPRO_READ, FPU_COPRO_NUMBER, mask, buf + 0, buf + 4, buf + 8, &dummy);
+    }
+#endif
+  memset (buf, 0, MAX_REGISTER_RAW_SIZE);
+}
+
+
+static void
+rdp_store_one_register (mask, buf)
+     int mask;
+     char *buf;
+{
+  int val = extract_unsigned_integer (buf, 4);
+
+  send_rdp ("bbww-SZ",
+	    RDP_CPU_WRITE, RDP_CPU_READWRITE_MODE_CURRENT, mask, val);
+}
+
+
+static void
+rdp_store_one_fpu_register (mask, buf)
+     int mask;
+     char *buf;
+{
+#if 0
+  /* See comment in fetch_one_fpu_register */
+  if (mask == RDP_FPU_READWRITE_MASK_FPS)
+    {
+      int val = extract_unsigned_integer (buf, 4);
+      /* this guy is only a word */
+      send_rdp ("bbww-SZ", RDP_COPRO_WRITE,
+		FPU_COPRO_NUMBER,
+		mask, val);
+    }
+  else
+    {
+      /* There are 12 bytes long 
+         !! fixme about endianness 
+       */
+      int dummy = 0;
+      /* I've seen these come as four words, not the three advertized !! */
+      printf ("Sending mask %x\n", mask);
+      send_rdp ("bbwwwww-SZ",
+		RDP_COPRO_WRITE,
+		FPU_COPRO_NUMBER,
+		mask,
+		*(int *) (buf + 0),
+		*(int *) (buf + 4),
+		*(int *) (buf + 8),
+		0);
+
+      printf ("done mask %x\n", mask);
+    }
+#endif
+}
+
+
+/* Convert between GDB requests and the RDP layer. */
+
+static void
+remote_rdp_fetch_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	remote_rdp_fetch_register (regno);
+    }
+  else
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+      if (regno < 15)
+	rdp_fetch_one_register (1 << regno, buf);
+      else if (regno == PC_REGNUM)
+	rdp_fetch_one_register (RDP_CPU_READWRITE_MASK_PC, buf);
+      else if (regno == PS_REGNUM)
+	rdp_fetch_one_register (RDP_CPU_READWRITE_MASK_CPSR, buf);
+      else if (regno == FPS_REGNUM)
+	rdp_fetch_one_fpu_register (RDP_FPU_READWRITE_MASK_FPS, buf);
+      else if (regno >= F0_REGNUM && regno <= F7_REGNUM)
+	rdp_fetch_one_fpu_register (1 << (regno - F0_REGNUM), buf);
+      else
+	{
+	  printf ("Help me with fetch reg %d\n", regno);
+	}
+      supply_register (regno, buf);
+    }
+}
+
+
+static void
+remote_rdp_store_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	remote_rdp_store_register (regno);
+    }
+  else
+    {
+      char tmp[MAX_REGISTER_RAW_SIZE];
+      read_register_gen (regno, tmp);
+      if (regno < 15)
+	rdp_store_one_register (1 << regno, tmp);
+      else if (regno == PC_REGNUM)
+	rdp_store_one_register (RDP_CPU_READWRITE_MASK_PC, tmp);
+      else if (regno == PS_REGNUM)
+	rdp_store_one_register (RDP_CPU_READWRITE_MASK_CPSR, tmp);
+      else if (regno >= F0_REGNUM && regno <= F7_REGNUM)
+	rdp_store_one_fpu_register (1 << (regno - F0_REGNUM), tmp);
+      else
+	{
+	  printf ("Help me with reg %d\n", regno);
+	}
+    }
+}
+
+static void
+remote_rdp_kill ()
+{
+  callback->shutdown (callback);
+}
+
+
+static void
+rdp_info ()
+{
+  send_rdp ("bw-S-W-Z", RDP_INFO, RDP_INFO_ABOUT_STEP,
+	    &ds.step_info);
+  send_rdp ("bw-S-W-Z", RDP_INFO, RDP_INFO_ABOUT_BREAK,
+	    &ds.break_info);
+  send_rdp ("bw-S-WW-Z", RDP_INFO, RDP_INFO_ABOUT_TARGET,
+	    &ds.target_info,
+	    &ds.model_info);
+
+  ds.can_step = ds.step_info & RDP_INFO_ABOUT_STEP_1;
+
+  ds.rdi_level = (ds.target_info >> 5) & 3;
+}
+
+
+static void
+rdp_execute_start ()
+{
+  /* Start it off, but don't wait for it */
+  send_rdp ("bb-", RDP_EXEC, RDP_EXEC_TYPE_SYNC);
+}
+
+
+static void
+rdp_set_command_line (command, args)
+     char * command;
+     char * args;
+{
+  /*
+  ** We could use RDP_INFO_SET_CMDLINE to send this, but EmbeddedICE systems
+  ** don't implement that, and get all confused at the unexpected text.
+  ** Instead, just keep a copy, and send it when the target does a SWI_GetEnv
+  */
+
+  if (commandline != NULL)
+    free (commandline);
+
+  commandline = malloc (strlen (command) + strlen (args) + 2);
+  if (commandline != NULL)
+    {
+      strcpy (commandline, command);
+      strcat (commandline, " ");
+      strcat (commandline, args);
+    }
+}
+
+static void
+rdp_catch_vectors ()
+{
+  /*
+  ** We want the target monitor to intercept the abort vectors
+  ** i.e. stop the program if any of these are used.
+  */
+  send_rdp ("bww-SZ", RDP_INFO, RDP_INFO_VECTOR_CATCH,
+	    /*
+	    ** Specify a bitmask including
+	    **  the reset vector
+	    **  the undefined instruction vector
+	    **  the prefetch abort vector
+	    **  the data abort vector
+	    **  the address exception vector
+	    */
+	    (1<<0)|(1<<1)|(1<<3)|(1<<4)|(1<<5)
+	    );
+}
+  
+
+
+#define a_byte 1
+#define a_word 2
+#define a_string 3
+
+
+typedef struct
+{
+  CORE_ADDR n;
+  const char *s;
+}
+argsin;
+
+#define ABYTE 1
+#define AWORD 2
+#define ASTRING 3
+#define ADDRLEN 4
+
+#define SWI_WriteC                      0x0
+#define SWI_Write0                      0x2
+#define SWI_ReadC                       0x4
+#define SWI_CLI                         0x5
+#define SWI_GetEnv                      0x10
+#define SWI_Exit                        0x11
+#define SWI_EnterOS                     0x16
+
+#define SWI_GetErrno                    0x60
+#define SWI_Clock                       0x61
+
+#define SWI_Time                        0x63
+#define SWI_Remove                      0x64
+#define SWI_Rename                      0x65
+#define SWI_Open                        0x66
+
+#define SWI_Close                       0x68
+#define SWI_Write                       0x69
+#define SWI_Read                        0x6a
+#define SWI_Seek                        0x6b
+#define SWI_Flen                        0x6c
+
+#define SWI_IsTTY                       0x6e
+#define SWI_TmpNam                      0x6f
+#define SWI_InstallHandler              0x70
+#define SWI_GenerateError               0x71
+
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+static int translate_open_mode[] =
+{
+  O_RDONLY,                          /* "r"   */
+  O_RDONLY+O_BINARY,                 /* "rb"  */
+  O_RDWR,                            /* "r+"  */
+  O_RDWR  +O_BINARY,                 /* "r+b" */
+  O_WRONLY         +O_CREAT+O_TRUNC, /* "w"   */
+  O_WRONLY+O_BINARY+O_CREAT+O_TRUNC, /* "wb"  */
+  O_RDWR           +O_CREAT+O_TRUNC, /* "w+"  */
+  O_RDWR  +O_BINARY+O_CREAT+O_TRUNC, /* "w+b" */
+  O_WRONLY         +O_APPEND+O_CREAT,/* "a"   */
+  O_WRONLY+O_BINARY+O_APPEND+O_CREAT,/* "ab"  */
+  O_RDWR           +O_APPEND+O_CREAT,/* "a+"  */
+  O_RDWR  +O_BINARY+O_APPEND+O_CREAT /* "a+b" */
+};
+
+static int
+exec_swi (swi, args)
+     int swi;
+     argsin *args;
+{
+  int i;
+  char c;
+  switch (swi)
+    {
+    case SWI_WriteC:
+      callback->write_stdout (callback, &c, 1);
+      return 0;
+    case SWI_Write0:
+      for (i = 0; i < args->n; i++)
+	callback->write_stdout (callback, args->s, strlen (args->s));
+      return 0;
+    case SWI_ReadC:
+      callback->read_stdin (callback, &c, 1);
+      args->n = c;
+      return 1;
+    case SWI_CLI:
+      args->n = callback->system (callback, args->s);
+      return 1;
+    case SWI_GetErrno:
+      args->n = callback->get_errno (callback);
+      return 1;
+    case SWI_Time:
+      args->n = callback->time (callback, NULL);
+      return 1;
+
+    case SWI_Clock :
+       /* return number of centi-seconds... */
+       args->n = 
+#ifdef CLOCKS_PER_SEC
+          (CLOCKS_PER_SEC >= 100)
+             ? (clock() / (CLOCKS_PER_SEC / 100))
+             : ((clock() * 100) / CLOCKS_PER_SEC) ;
+#else
+     /* presume unix... clock() returns microseconds */
+          clock() / 10000 ;
+#endif
+       return 1 ;
+
+    case SWI_Remove:
+      args->n = callback->unlink (callback, args->s);
+      return 1;
+    case SWI_Rename:
+      args->n = callback->rename (callback, args[0].s, args[1].s);
+      return 1;
+
+    case SWI_Open:
+	/* Now we need to decode the Demon open mode */
+	i = translate_open_mode[args[1].n];
+
+	/* Filename ":tt" is special: it denotes stdin/out */
+	if (strcmp(args->s,":tt")==0)
+	  {
+	    if (i == O_RDONLY ) /* opening tty "r" */
+	      args->n = 0 /* stdin */ ;
+	    else 
+	      args->n = 1 /* stdout */ ;
+	  }
+	else
+	  args->n = callback->open (callback, args->s, i);
+      return 1;
+
+    case SWI_Close:
+      args->n = callback->close (callback, args->n);
+      return 1;
+
+    case SWI_Write:
+      /* Return the number of bytes *not* written */
+      args->n = args[1].n -
+	callback->write (callback, args[0].n, args[1].s, args[1].n);
+      return 1;
+
+    case SWI_Read:
+      {
+	char *copy = alloca (args[2].n);
+	int done = callback->read (callback, args[0].n, copy, args[2].n);
+	if (done > 0)
+	  remote_rdp_xfer_inferior_memory (args[1].n, copy, done, 1, 0);
+	args->n = args[2].n-done;
+	return 1;
+      }
+
+    case SWI_Seek:
+      /* Return non-zero on failure */
+      args->n = callback->lseek (callback, args[0].n, args[1].n, 0) < 0;
+      return 1;
+
+    case SWI_Flen:
+      {
+	long old = callback->lseek (callback, args->n, 0, SEEK_CUR);
+	args->n = callback->lseek (callback, args->n, 0, SEEK_END);
+	callback->lseek (callback, args->n, old, 0);
+	return 1;
+      }
+
+    case SWI_IsTTY:
+      args->n = callback->isatty (callback, args->n);
+      return 1;
+
+    case SWI_GetEnv:
+      if (commandline != NULL)
+	{
+	  int len = strlen (commandline);
+	  if (len > 255)
+	    {
+	      len = 255;
+	      commandline [255]='\0';
+	    }
+	  remote_rdp_xfer_inferior_memory (args[0].n,
+					   commandline, len+1, 1, 0);
+	}
+      else
+	remote_rdp_xfer_inferior_memory (args[0].n, "", 1, 1, 0);
+      return 1;
+      
+    default:
+      return 0;
+    }
+}
+
+
+static void
+handle_swi ()
+{
+  argsin args[3];
+  char *buf;
+  int len;
+  int count = 0;
+
+  int swino = get_word ();
+  int type = get_byte ();
+  while (type != 0)
+    {
+      switch (type & 0x3)
+	{
+	case ABYTE:
+	  args[count].n = get_byte ();
+	  break;
+
+	case AWORD:
+	  args[count].n = get_word ();
+	  break;
+
+	case ASTRING:
+	  /* If the word is under 32 bytes it will be sent otherwise
+	     an address to it is passed. Also: Special case of 255 */
+
+	  len = get_byte ();
+	  if (len > 32)
+	    {
+	      if (len == 255)
+		{
+		  len = get_word ();
+		}
+	      buf = alloca (len);
+	      remote_rdp_xfer_inferior_memory (get_word (),
+					       buf,
+					       len,
+					       0,
+					       0);
+	    }
+	  else
+	    {
+	      int i;
+	      buf = alloca (len + 1);
+	      for (i = 0; i < len; i++)
+		buf[i] = get_byte ();
+	      buf[i] = 0;
+	    }
+	  args[count].n = len;
+	  args[count].s = buf;
+	  break;
+
+	default:
+	  error ("Unimplented SWI argument");
+	}
+
+      type = type >> 2;
+      count++;
+    }
+
+  if (exec_swi (swino, args))
+    {
+      /* We have two options here reply with either a byte or a word
+         which is stored in args[0].n. There is no harm in replying with
+         a word all the time, so thats what I do! */
+      send_rdp ("bbw-", RDP_OSOpReply, RDP_OSOpWord, args[0].n);
+    }
+  else
+    {
+      send_rdp ("bb-", RDP_OSOpReply, RDP_OSOpNothing);
+    }
+}
+
+static void
+rdp_execute_finish ()
+{
+  int running = 1;
+
+  while (running)
+    {
+      int res;
+      res = SERIAL_READCHAR (io, 1);
+      while (res == SERIAL_TIMEOUT)
+	{
+	  QUIT;
+	  printf_filtered ("Waiting for target..\n");
+	  res = SERIAL_READCHAR (io, 1);
+	}
+
+      switch (res)
+	{
+	case RDP_RES_SWI:
+	  handle_swi ();
+	  break;
+	case RDP_RES_VALUE:
+	  send_rdp ("B", &ds.rdi_stopped_status);
+	  running = 0;
+	  break;
+	case RDP_RESET:
+	  printf_filtered ("Target reset\n");
+	  running = 0;
+	  break;
+	default:
+	  printf_filtered ("Ignoring %x\n", res);
+	  break;
+	}
+    }
+}
+
+
+static void
+rdp_execute ()
+{
+  rdp_execute_start ();
+  rdp_execute_finish ();
+}
+
+static int
+remote_rdp_insert_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;
+{
+  int res;
+  if (ds.rdi_level > 0)
+    {
+      send_rdp ("bwb-SWB",
+		RDP_SET_BREAK,
+		addr,
+		RDP_SET_BREAK_TYPE_PC_EQUAL | RDP_SET_BREAK_TYPE_GET_HANDLE,
+		save,
+		&res);
+    }
+  else
+    {
+      send_rdp ("bwb-SB",
+		RDP_SET_BREAK,
+		addr,
+		RDP_SET_BREAK_TYPE_PC_EQUAL,
+		&res);
+    }
+  return res;
+}
+
+static int
+remote_rdp_remove_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;
+{
+  int res;
+  if (ds.rdi_level > 0)
+    {
+      send_rdp ("b-p-S-B",
+		RDP_CLEAR_BREAK,
+		save, 4,
+		&res);
+    }
+  else
+    {
+      send_rdp ("bw-S-B",
+		RDP_CLEAR_BREAK,
+		addr,
+		&res);
+    }
+  return res;
+}
+
+static void
+rdp_step ()
+{
+  if (ds.can_step && 0)
+    {
+      /* The pie board can't do steps so I can't test this, and
+         the other code will always work. */
+      int status;
+      send_rdp ("bbw-S-B",
+		RDP_STEP, 0, 1,
+		&status);
+    }
+  else
+    {
+      char handle[4];
+      CORE_ADDR pc = read_register (PC_REGNUM);
+      pc = arm_get_next_pc (pc);
+      remote_rdp_insert_breakpoint (pc, &handle);
+      rdp_execute ();
+      remote_rdp_remove_breakpoint (pc, &handle);
+    }
+}
+
+static void
+remote_rdp_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int not_icebreaker;
+
+  if (!args)
+    error_no_arg ("serial port device name");
+
+  baud_rate = 9600;
+
+  target_preopen (from_tty);
+
+  io = SERIAL_OPEN (args);
+
+  if (!io)
+    perror_with_name (args);
+
+  SERIAL_RAW (io);
+
+  rdp_init (1, from_tty);
+
+
+  if (from_tty)
+    {
+      printf_unfiltered ("Remote RDP debugging using %s at %d baud\n", args, baud_rate);
+    }
+
+  rdp_info ();
+
+  /* Need to set up the vector interception state */
+  rdp_catch_vectors();
+
+  /*
+  ** If it's an EmbeddedICE, we need to set the processor config.
+  ** Assume we can always have ARM7TDI...
+  */
+  send_rdp ("bw-SB", RDP_INFO, RDP_INFO_ICEBREAKER, & not_icebreaker);
+  if (!not_icebreaker)
+    {
+      const char * CPU = "ARM7TDI";
+      int ICEversion;
+      int len = strlen (CPU);
+      
+      send_rdp ("bbbbw-p-SWZ",
+		RDP_SELECT_CONFIG,
+		RDI_ConfigCPU,	/* Aspect: set the CPU */
+		len,		/* The number of bytes in the name */
+		RDI_MatchAny,	/* We'll take whatever we get */
+		0,		/* We'll take whatever version's there */
+		CPU,len,
+		& ICEversion);
+    }
+
+  /* command line initialised on 'run'*/
+
+  push_target (& remote_rdp_ops);
+
+  callback->init (callback);
+  flush_cached_frames ();
+  registers_changed ();
+  stop_pc = read_pc ();
+  set_current_frame (create_new_frame (read_fp (), stop_pc));
+  select_frame (get_current_frame (), 0);
+  print_stack_frame (selected_frame, -1, 1);
+}
+
+
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+remote_rdp_close (quitting)
+     int quitting;
+{
+  callback->shutdown (callback);
+  if (io)
+    SERIAL_CLOSE (io);
+  io = 0;
+}
+
+
+/* Resume execution of the target process.  STEP says whether to single-step
+   or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given
+   to the target, or zero for no signal.  */
+
+static void
+remote_rdp_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  if (step)
+    rdp_step ();
+  else
+    rdp_execute ();
+}
+
+/* Wait for inferior process to do something.  Return pid of child,
+   or -1 in case of error; store status through argument pointer STATUS,
+   just as `wait' would.  */
+
+static int
+remote_rdp_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  switch (ds.rdi_stopped_status)
+    {
+    default:
+    case RDP_RES_RESET:
+    case RDP_RES_SWI:
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = read_register (0);
+      break;
+    case RDP_RES_AT_BREAKPOINT:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      /* The signal in sigrc is a host signal.  That probably
+         should be fixed.  */
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+#if 0
+    case rdp_signalled:
+      status->kind = TARGET_WAITKIND_SIGNALLED;
+      /* The signal in sigrc is a host signal.  That probably
+         should be fixed.  */
+      status->value.sig = target_signal_from_host (sigrc);
+      break;
+#endif
+    }
+
+  return inferior_pid;
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+remote_rdp_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static int
+remote_rdp_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;	/* ignored */
+{
+  /* I infer from D Taylor's code that there's a limit on the amount
+     we can transfer in one chunk.. */
+  int done = 0;
+  while (done < len)
+    {
+      int justdone;
+      int thisbite = len - done;
+      if (thisbite > RDP_MOUTHFULL)
+	thisbite = RDP_MOUTHFULL;
+
+      QUIT;
+
+      if (write)
+	{
+	  justdone = rdp_write (memaddr + done, myaddr + done, thisbite);
+	}
+      else
+	{
+	  justdone = rdp_read (memaddr + done, myaddr + done, thisbite);
+	}
+
+      done += justdone;
+
+      if (justdone != thisbite)
+	break;
+    }
+  return done;
+}
+
+
+
+struct yn
+{
+  const char *name;
+  int bit;
+};
+static struct yn stepinfo[] =
+{
+  {"Step more than one instruction", RDP_INFO_ABOUT_STEP_GT_1},
+  {"Step to jump", RDP_INFO_ABOUT_STEP_TO_JMP},
+  {"Step one instruction", RDP_INFO_ABOUT_STEP_1},
+  {0}
+};
+
+static struct yn breakinfo[] =
+{
+  {"comparison breakpoints supported", RDP_INFO_ABOUT_BREAK_COMP},
+  {"range breakpoints supported", RDP_INFO_ABOUT_BREAK_RANGE},
+  {"watchpoints for byte reads supported", RDP_INFO_ABOUT_BREAK_BYTE_READ},
+  {"watchpoints for half-word reads supported", RDP_INFO_ABOUT_BREAK_HALFWORD_READ},
+  {"watchpoints for word reads supported", RDP_INFO_ABOUT_BREAK_WORD_READ},
+  {"watchpoints for byte writes supported", RDP_INFO_ABOUT_BREAK_BYTE_WRITE},
+  {"watchpoints for half-word writes supported", RDP_INFO_ABOUT_BREAK_HALFWORD_WRITE},
+  {"watchpoints for word writes supported", RDP_INFO_ABOUT_BREAK_WORD_WRITE},
+  {"mask break/watch-points supported", RDP_INFO_ABOUT_BREAK_MASK},
+{"thread-specific breakpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_BREAK},
+{"thread-specific watchpoints supported", RDP_INFO_ABOUT_BREAK_THREAD_WATCH},
+  {"conditional breakpoints supported", RDP_INFO_ABOUT_BREAK_COND},
+  {0}
+};
+
+
+static void
+dump_bits (t, info)
+     struct yn *t;
+     int info;
+{
+  while (t->name)
+    {
+      printf_unfiltered ("  %-45s : %s\n", t->name, (info & t->bit) ? "Yes" : "No");
+      t++;
+    }
+}
+
+static void
+remote_rdp_files_info (target)
+     struct target_ops *target;
+{
+  printf_filtered ("Target capabilities:\n");
+  dump_bits (stepinfo, ds.step_info);
+  dump_bits (breakinfo, ds.break_info);
+  printf_unfiltered ("target level RDI %x\n", (ds.target_info >> 5) & 3);
+}
+
+
+static void
+remote_rdp_create_inferior (exec_file, allargs, env)
+     char *  exec_file;
+     char *  allargs;
+     char ** env;
+{
+  CORE_ADDR entry_point;
+
+  if (exec_file == 0 || exec_bfd == 0)
+   error ("No executable file specified.");
+
+  entry_point = (CORE_ADDR) bfd_get_start_address (exec_bfd);
+
+  remote_rdp_kill ();	 
+  remove_breakpoints ();
+  init_wait_for_inferior ();
+
+  /* This gives us a chance to set up the command line */
+  rdp_set_command_line (exec_file, allargs);
+
+  inferior_pid = 42;
+  insert_breakpoints ();  /* Needed to get correct instruction in cache */
+
+  /*
+  ** RDP targets don't provide any facility to set the top of memory,
+  ** so we don't bother to look for MEMSIZE in the environment.
+  */
+
+  /* Let's go! */
+  proceed (entry_point, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Accept any stray run/attach commands */
+static int
+remote_rdp_can_run()
+{
+  return 1;
+}
+
+/* Attach doesn't need to do anything */
+static void
+remote_rdp_attach(args, from_tty)
+     char * args;
+     int from_tty;
+{
+  return;
+}
+  
+/* Define the target subroutine names */
+
+struct target_ops remote_rdp_ops ;
+
+static void 
+init_remote_rdp_ops(void)
+{
+  remote_rdp_ops.to_shortname =   "rdp";
+  remote_rdp_ops.to_longname =   "Remote Target using the RDProtocol";
+  remote_rdp_ops.to_doc =   "Use a remote ARM system which uses the ARM Remote Debugging Protocol";
+  remote_rdp_ops.to_open =   remote_rdp_open;	
+  remote_rdp_ops.to_close =   remote_rdp_close;	
+  remote_rdp_ops.to_attach =   remote_rdp_attach;
+  remote_rdp_ops.to_post_attach = NULL;
+  remote_rdp_ops.to_require_attach = NULL;
+  remote_rdp_ops.to_detach =   NULL;
+  remote_rdp_ops.to_require_detach = NULL;		
+  remote_rdp_ops.to_resume =   remote_rdp_resume;
+  remote_rdp_ops.to_wait  =   remote_rdp_wait;
+  remote_rdp_ops.to_post_wait = NULL;	
+  remote_rdp_ops.to_fetch_registers  =   remote_rdp_fetch_register;
+  remote_rdp_ops.to_store_registers  =   remote_rdp_store_register;
+  remote_rdp_ops.to_prepare_to_store =   remote_rdp_prepare_to_store;
+  remote_rdp_ops.to_xfer_memory  =   remote_rdp_xfer_inferior_memory;
+  remote_rdp_ops.to_files_info  =   remote_rdp_files_info;
+  remote_rdp_ops.to_insert_breakpoint =   remote_rdp_insert_breakpoint;
+  remote_rdp_ops.to_remove_breakpoint =   remote_rdp_remove_breakpoint;
+  remote_rdp_ops.to_terminal_init  =   NULL;		
+  remote_rdp_ops.to_terminal_inferior =   NULL;		
+  remote_rdp_ops.to_terminal_ours_for_output =   NULL;
+  remote_rdp_ops.to_terminal_ours  =   NULL;	
+  remote_rdp_ops.to_terminal_info  =   NULL;	
+  remote_rdp_ops.to_kill  =   remote_rdp_kill;	
+  remote_rdp_ops.to_load  =   generic_load;	
+  remote_rdp_ops.to_lookup_symbol =   NULL;				
+  remote_rdp_ops.to_create_inferior =   remote_rdp_create_inferior;
+  remote_rdp_ops.to_post_startup_inferior = NULL;
+  remote_rdp_ops.to_acknowledge_created_inferior = NULL;
+  remote_rdp_ops.to_clone_and_follow_inferior = NULL;
+  remote_rdp_ops.to_post_follow_inferior_by_clone = NULL;
+  remote_rdp_ops.to_insert_fork_catchpoint = NULL;
+  remote_rdp_ops.to_remove_fork_catchpoint = NULL;
+  remote_rdp_ops.to_insert_vfork_catchpoint = NULL;
+  remote_rdp_ops.to_remove_vfork_catchpoint = NULL;
+  remote_rdp_ops.to_has_forked = NULL;
+  remote_rdp_ops.to_has_vforked = NULL;
+  remote_rdp_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  remote_rdp_ops.to_post_follow_vfork = NULL;
+  remote_rdp_ops.to_insert_exec_catchpoint = NULL;
+  remote_rdp_ops.to_remove_exec_catchpoint = NULL;
+  remote_rdp_ops.to_has_execd = NULL;
+  remote_rdp_ops.to_reported_exec_events_per_exec_call = NULL;
+  remote_rdp_ops.to_has_exited = NULL;
+  remote_rdp_ops.to_mourn_inferior =   generic_mourn_inferior;
+  remote_rdp_ops.to_can_run  =   remote_rdp_can_run;
+  remote_rdp_ops.to_notice_signals =   0;	
+  remote_rdp_ops.to_thread_alive  =   0;	
+  remote_rdp_ops.to_stop  =   0;
+  remote_rdp_ops.to_pid_to_exec_file = NULL;
+  remote_rdp_ops.to_core_file_to_sym_file = NULL;		
+  remote_rdp_ops.to_stratum =   process_stratum;
+  remote_rdp_ops.DONT_USE =   NULL;		
+  remote_rdp_ops.to_has_all_memory =   1;	
+  remote_rdp_ops.to_has_memory =   1;		
+  remote_rdp_ops.to_has_stack =   1;		
+  remote_rdp_ops.to_has_registers =   1;	
+  remote_rdp_ops.to_has_execution =   1;	
+  remote_rdp_ops.to_sections =   NULL;		
+  remote_rdp_ops.to_sections_end =   NULL;
+  remote_rdp_ops.to_magic =   OPS_MAGIC;
+}
+
+void
+_initialize_remote_rdp ()
+{
+  init_remote_rdp_ops() ;
+  add_target (&remote_rdp_ops);
+}
diff --git a/gdb/remote-sds.c b/gdb/remote-sds.c
new file mode 100644
index 0000000..3ab5f44
--- /dev/null
+++ b/gdb/remote-sds.c
@@ -0,0 +1,1206 @@
+/* Remote target communications for serial-line targets using SDS' protocol.
+   Copyright 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This interface was written by studying the behavior of the SDS
+   monitor on an ADS 821/860 board, and by consulting the
+   documentation of the monitor that is available on Motorola's web
+   site.  -sts 8/13/97 */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "gdbthread.h"
+#include "gdbcore.h"
+#include "dcache.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+#include "serial.h"
+
+extern void _initialize_remote_sds PARAMS ((void));
+
+/* Declarations of local functions. */
+
+static int sds_write_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static int sds_read_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static void sds_files_info PARAMS ((struct target_ops *ignore));
+
+static int sds_xfer_memory PARAMS ((CORE_ADDR, char *,
+				    int, int, struct target_ops *));
+
+static void sds_prepare_to_store PARAMS ((void));
+
+static void sds_fetch_registers PARAMS ((int));
+
+static void sds_resume PARAMS ((int, int, enum target_signal));
+
+static int sds_start_remote PARAMS ((PTR));
+
+static void sds_open PARAMS ((char *, int));
+
+static void sds_close PARAMS ((int));
+
+static void sds_store_registers PARAMS ((int));
+
+static void sds_mourn PARAMS ((void));
+
+static void sds_create_inferior PARAMS ((char *, char *, char **));
+
+static void sds_load PARAMS ((char *, int));
+
+static int getmessage PARAMS ((unsigned char *, int));
+
+static int putmessage PARAMS ((unsigned char *, int));
+
+static int sds_send PARAMS ((unsigned char *, int));
+
+static int readchar PARAMS ((int));
+
+static int sds_wait PARAMS ((int, struct target_waitstatus *));
+
+static void sds_kill PARAMS ((void));
+
+static int tohex PARAMS ((int));
+
+static int fromhex PARAMS ((int));
+
+static void sds_detach PARAMS ((char *, int));
+
+static void sds_interrupt PARAMS ((int));
+
+static void sds_interrupt_twice PARAMS ((int));
+
+static void interrupt_query PARAMS ((void));
+
+static int read_frame PARAMS ((char *));
+
+static int sds_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int sds_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static void init_sds_ops PARAMS ((void));
+
+static void sds_command PARAMS ((char *args, int from_tty));
+
+/* Define the target operations vector. */
+
+static struct target_ops sds_ops;
+
+/* This was 5 seconds, which is a long time to sit and wait.
+   Unless this is going though some terminal server or multiplexer or
+   other form of hairy serial connection, I would think 2 seconds would
+   be plenty.  */
+
+static int sds_timeout = 2;
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so
+   that sds_open knows that we don't have a file open when the program
+   starts.  */
+
+static serial_t sds_desc = NULL;
+
+/* This limit comes from the monitor.  */
+
+#define	PBUFSIZ	250
+
+/* Maximum number of bytes to read/write at once.  The value here
+   is chosen to fill up a packet (the headers account for the 32).  */
+#define MAXBUFBYTES ((PBUFSIZ-32)/2)
+
+static int next_msg_id;
+
+static int just_started;
+
+static int message_pending;
+
+
+/* Clean up connection to a remote debugger.  */
+
+/* ARGSUSED */
+static void
+sds_close (quitting)
+     int quitting;
+{
+  if (sds_desc)
+    SERIAL_CLOSE (sds_desc);
+  sds_desc = NULL;
+}
+
+/* Stub for catch_errors.  */
+
+static int
+sds_start_remote (dummy)
+     PTR dummy;
+{
+  char c;
+  unsigned char buf[200];
+
+  immediate_quit = 1;		/* Allow user to interrupt it */
+
+  /* Ack any packet which the remote side has already sent.  */
+  SERIAL_WRITE (sds_desc, "{#*\r\n", 5);
+  SERIAL_WRITE (sds_desc, "{#}\r\n", 5);
+
+  while ((c = readchar (1)) >= 0)
+    printf_unfiltered ("%c", c);
+  printf_unfiltered ("\n");
+
+  next_msg_id = 251;
+
+  buf[0] = 26;
+  sds_send (buf, 1);
+
+  buf[0] = 0;
+  sds_send (buf, 1);
+
+  immediate_quit = 0;
+
+  start_remote ();		/* Initialize gdb process mechanisms */
+  return 1;
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static DCACHE *sds_dcache;
+
+static void
+sds_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  if (name == 0)
+    error ("To open a remote debug connection, you need to specify what serial\n\
+device is attached to the remote system (e.g. /dev/ttya).");
+
+  target_preopen (from_tty);
+
+  unpush_target (&sds_ops);
+
+  sds_dcache = dcache_init (sds_read_bytes, sds_write_bytes);
+
+  sds_desc = SERIAL_OPEN (name);
+  if (!sds_desc)
+    perror_with_name (name);
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (sds_desc, baud_rate))
+	{
+	  SERIAL_CLOSE (sds_desc);
+	  perror_with_name (name);
+	}
+    }
+
+
+  SERIAL_RAW (sds_desc);
+
+  /* If there is something sitting in the buffer we might take it as a
+     response to a command, which would be bad.  */
+  SERIAL_FLUSH_INPUT (sds_desc);
+
+  if (from_tty)
+    {
+      puts_filtered ("Remote debugging using ");
+      puts_filtered (name);
+      puts_filtered ("\n");
+    }
+  push_target (&sds_ops);	/* Switch to using remote target now */
+
+  just_started = 1;
+
+  /* Start the remote connection; if error (0), discard this target.
+     In particular, if the user quits, be sure to discard it (we'd be
+     in an inconsistent state otherwise).  */
+  if (!catch_errors (sds_start_remote, NULL, 
+		     "Couldn't establish connection to remote target\n",
+		     RETURN_MASK_ALL))
+    pop_target ();
+}
+
+/* This takes a program previously attached to and detaches it.  After
+   this is done, GDB can be used to debug some other program.  We
+   better not have left any breakpoints in the target program or it'll
+   die when it hits one.  */
+
+static void
+sds_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[PBUFSIZ];
+
+  if (args)
+    error ("Argument given to \"detach\" when remotely debugging.");
+
+#if 0
+  /* Tell the remote target to detach.  */
+  strcpy (buf, "D");
+  sds_send (buf, 1);
+#endif
+
+  pop_target ();
+  if (from_tty)
+    puts_filtered ("Ending remote debugging.\n");
+}
+
+/* Convert hex digit A to a number.  */
+
+static int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  else if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  else 
+    error ("Reply contains invalid hex digit %d", a);
+}
+
+/* Convert number NIB to a hex digit.  */
+
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    return '0'+nib;
+  else
+    return 'a'+nib-10;
+}
+
+static int
+tob64 (inbuf, outbuf, len)
+     unsigned char *inbuf;
+     char *outbuf;
+     int len;
+{
+  int i, sum;
+  char *p;
+
+  if (len % 3 != 0)
+    error ("bad length");
+
+  p = outbuf;
+  for (i = 0; i < len; i += 3)
+    {
+      /* Collect the next three bytes into a number.  */
+      sum = ((long) *inbuf++) << 16;
+      sum |= ((long) *inbuf++) <<  8;
+      sum |= ((long) *inbuf++);
+
+      /* Spit out 4 6-bit encodings.  */
+      *p++ = ((sum >> 18) & 0x3f) + '0';
+      *p++ = ((sum >> 12) & 0x3f) + '0';
+      *p++ = ((sum >>  6) & 0x3f) + '0';
+      *p++ = (sum & 0x3f) + '0';
+    }
+  return (p - outbuf);
+}
+
+static int
+fromb64 (inbuf, outbuf, len)
+     char *inbuf, *outbuf;
+     int len;
+{
+  int i, sum;
+
+  if (len % 4 != 0)
+    error ("bad length");
+
+  for (i = 0; i < len; i += 4)
+    {
+      /* Collect 4 6-bit digits.  */
+      sum  = (*inbuf++ - '0') << 18;
+      sum |= (*inbuf++ - '0') << 12;
+      sum |= (*inbuf++ - '0') <<  6;
+      sum |= (*inbuf++ - '0');
+
+      /* Now take the resulting 24-bit number and get three bytes out
+         of it.  */
+      *outbuf++ = (sum >> 16) & 0xff;
+      *outbuf++ = (sum >>  8) & 0xff;
+      *outbuf++ = sum & 0xff;
+    }
+
+  return (len / 4) * 3;
+}
+
+
+/* Tell the remote machine to resume.  */
+
+static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
+int last_sent_step;
+
+static void
+sds_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  unsigned char buf[PBUFSIZ];
+
+  dcache_flush (sds_dcache);
+
+  last_sent_signal = siggnal;
+  last_sent_step = step;
+
+  buf[0] = (step ? 21 : 20);
+  buf[1] = 0;  /* (should be signal?) */
+
+  sds_send (buf, 2);
+}
+
+/* Send a message to target to halt it.  Target will respond, and send
+   us a message pending notice.  */
+
+static void
+sds_interrupt (signo)
+     int signo;
+{
+  unsigned char buf[PBUFSIZ];
+
+  /* If this doesn't work, try more severe steps.  */
+  signal (signo, sds_interrupt_twice);
+  
+  if (remote_debug)
+    printf_unfiltered ("sds_interrupt called\n");
+
+  buf[0] = 25;
+  sds_send (buf, 1);
+}
+
+static void (*ofunc)();
+
+/* The user typed ^C twice.  */
+
+static void
+sds_interrupt_twice (signo)
+     int signo;
+{
+  signal (signo, ofunc);
+  
+  interrupt_query ();
+
+  signal (signo, sds_interrupt);
+}
+
+/* Ask the user what to do when an interrupt is received.  */
+
+static void
+interrupt_query ()
+{
+  target_terminal_ours ();
+
+  if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+    {
+      target_mourn_inferior ();
+      return_to_top_level (RETURN_QUIT);
+    }
+
+  target_terminal_inferior ();
+}
+
+/* If nonzero, ignore the next kill.  */
+int kill_kludge;
+
+/* Wait until the remote machine stops, then return, storing status in
+   STATUS just as `wait' would.  Returns "pid" (though it's not clear
+   what, if anything, that means in the case of this target).  */
+
+static int
+sds_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  unsigned char buf[PBUFSIZ];
+  int retlen;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  ofunc = (void (*)()) signal (SIGINT, sds_interrupt);
+
+  signal (SIGINT, ofunc);
+
+  if (just_started)
+    {
+      just_started = 0;
+      status->kind = TARGET_WAITKIND_STOPPED;
+      return inferior_pid;
+    }
+
+  while (1)
+    {
+      getmessage (buf, 1);
+
+      if (message_pending)
+	{
+	  buf[0] = 26;
+	  retlen = sds_send (buf, 1);
+	  if (remote_debug)
+	    {
+	      fprintf_unfiltered (gdb_stderr, "Signals: %04x %02x %02x\n",
+				  ((int) buf[0]) << 8 + buf[1],
+				  buf[2], buf[3]);
+	    }
+	  message_pending = 0;
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_TRAP;
+	  goto got_status;
+	}
+    }
+ got_status:
+  return inferior_pid;
+}
+
+static unsigned char sprs[16];
+
+/* Read the remote registers into the block REGS.  */
+/* Currently we just read all the registers, so we don't use regno.  */
+
+/* ARGSUSED */
+static void
+sds_fetch_registers (regno)
+     int regno;
+{
+  unsigned char buf[PBUFSIZ];
+  int i, retlen;
+  char *p;
+  char regs[REGISTER_BYTES];
+
+  /* Unimplemented registers read as all bits zero.  */
+  memset (regs, 0, REGISTER_BYTES);
+
+  buf[0] = 18;
+  buf[1] = 1;
+  buf[2] = 0;
+  retlen = sds_send (buf, 3);
+
+  for (i = 0; i < 4 * 6; ++i)
+    regs[i + 4 * 32 + 8 * 32] = buf[i];
+  for (i = 0; i < 4 * 4; ++i)
+    sprs[i] = buf[i + 4 * 7];
+
+  buf[0] = 18;
+  buf[1] = 2;
+  buf[2] = 0;
+  retlen = sds_send (buf, 3);
+
+  for (i = 0; i < retlen; i++)
+    regs[i] = buf[i];
+
+  /* (should warn about reply too short) */
+
+  for (i = 0; i < NUM_REGS; i++)
+    supply_register (i, &regs[REGISTER_BYTE(i)]);
+}
+
+/* Prepare to store registers.  Since we may send them all, we have to
+   read out the ones we don't want to change first.  */
+
+static void 
+sds_prepare_to_store ()
+{
+  /* Make sure the entire registers array is valid.  */
+  read_register_bytes (0, (char *)NULL, REGISTER_BYTES);
+}
+
+/* Store register REGNO, or all registers if REGNO == -1, from the contents
+   of REGISTERS.  FIXME: ignores errors.  */
+
+static void
+sds_store_registers (regno)
+     int regno;
+{
+  unsigned char *p, buf[PBUFSIZ];
+  int i;
+
+  /* Store all the special-purpose registers.  */
+  p = buf;
+  *p++ = 19;
+  *p++ = 1;
+  *p++ = 0;
+  *p++ = 0;
+  for (i = 0; i < 4 * 6; i++)
+    *p++ = registers[i + 4 * 32 + 8 * 32];
+  for (i = 0; i < 4 * 1; i++)
+    *p++ = 0;
+  for (i = 0; i < 4 * 4; i++)
+    *p++ = sprs[i];
+
+  sds_send (buf, p - buf);
+
+  /* Store all the general-purpose registers.  */
+  p = buf;
+  *p++ = 19;
+  *p++ = 2;
+  *p++ = 0;
+  *p++ = 0;
+  for (i = 0; i < 4 * 32; i++)
+    *p++ = registers[i];
+
+  sds_send (buf, p - buf);
+
+}
+
+/* Write memory data directly to the remote machine.  This does not
+   inform the data cache; the data cache uses this.  MEMADDR is the
+   address in the remote memory space.  MYADDR is the address of the
+   buffer in our space.  LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int
+sds_write_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int max_buf_size;		/* Max size of packet output buffer */
+  int origlen;
+  unsigned char buf[PBUFSIZ];
+  int todo;
+  int i;
+
+  /* Chop the transfer down if necessary */
+
+  max_buf_size = 150;
+
+  origlen = len;
+  while (len > 0)
+    {
+      todo = min (len, max_buf_size);
+
+      buf[0] = 13;
+      buf[1] = 0;
+      buf[2] = (int) (memaddr >> 24) & 0xff;
+      buf[3] = (int) (memaddr >> 16) & 0xff;
+      buf[4] = (int) (memaddr >>  8) & 0xff;
+      buf[5] = (int) (memaddr      ) & 0xff;
+      buf[6] = 1;
+      buf[7] = 0;
+
+      for (i = 0; i < todo; i++)
+	buf[i + 8] = myaddr[i];
+
+      sds_send (buf, 8 + todo);
+
+      /* (should look at result) */
+
+      myaddr += todo;
+      memaddr += todo;
+      len -= todo;
+    }
+  return origlen;
+}
+
+/* Read memory data directly from the remote machine.  This does not
+   use the data cache; the data cache uses this.  MEMADDR is the
+   address in the remote memory space.  MYADDR is the address of the
+   buffer in our space.  LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int
+sds_read_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int max_buf_size;		/* Max size of packet output buffer */
+  int origlen, retlen;
+  unsigned char buf[PBUFSIZ];
+  int todo;
+  int i;
+
+  /* Chop the transfer down if necessary */
+
+  max_buf_size = 150;
+
+  origlen = len;
+  while (len > 0)
+    {
+      todo = min (len, max_buf_size);
+
+      buf[0] = 12;
+      buf[1] = 0;
+      buf[2] = (int) (memaddr >> 24) & 0xff;
+      buf[3] = (int) (memaddr >> 16) & 0xff;
+      buf[4] = (int) (memaddr >>  8) & 0xff;
+      buf[5] = (int) (memaddr      ) & 0xff;
+      buf[6] = (int) (todo >> 8) & 0xff;
+      buf[7] = (int) (todo     ) & 0xff;
+      buf[8] = 1;
+
+      retlen = sds_send (buf, 9);
+
+      if (retlen - 2 != todo)
+	{
+	  return 0;
+	}
+
+      /* Reply describes memory byte by byte. */
+
+      for (i = 0; i < todo; i++)
+	myaddr[i] = buf[i + 2];
+
+      myaddr += todo;
+      memaddr += todo;
+      len -= todo;
+    }
+
+  return origlen;
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR,
+   transferring to or from debugger address MYADDR.  Write to inferior
+   if SHOULD_WRITE is nonzero.  Returns length of data written or
+   read; 0 for error.  */
+
+/* ARGSUSED */
+static int
+sds_xfer_memory(memaddr, myaddr, len, should_write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+     struct target_ops *target;			/* ignored */
+{
+  return dcache_xfer_memory (sds_dcache, memaddr, myaddr, len, should_write);
+}
+
+
+static void
+sds_files_info (ignore)
+     struct target_ops *ignore;
+{
+  puts_filtered ("Debugging over a serial connection, using SDS protocol.\n");
+}
+
+/* Stuff for dealing with the packets which are part of this protocol.
+   See comment at top of file for details.  */
+
+/* Read a single character from the remote end, masking it down to 7 bits. */
+
+static int
+readchar (timeout)
+     int timeout;
+{
+  int ch;
+
+  ch = SERIAL_READCHAR (sds_desc, timeout);
+
+  if (remote_debug > 1 && ch >= 0)
+    printf_unfiltered("%c(%x)", ch, ch);
+
+  switch (ch)
+    {
+    case SERIAL_EOF:
+      error ("Remote connection closed");
+    case SERIAL_ERROR:
+      perror_with_name ("Remote communication error");
+    case SERIAL_TIMEOUT:
+      return ch;
+    default:
+      return ch & 0x7f;
+    }
+}
+
+/* An SDS-style checksum is a sum of the bytes modulo 253.  (Presumably
+   because 253, 254, and 255 are special flags in the protocol.)  */
+
+static int
+compute_checksum (csum, buf, len)
+     int csum, len;
+     char *buf;
+{
+  int i;
+
+  for (i = 0; i < len; ++i)
+    csum += (unsigned char) buf[i];
+
+  csum %= 253;
+  return csum;
+}
+
+/* Send the command in BUF to the remote machine, and read the reply
+   into BUF also.  */
+
+static int
+sds_send (buf, len)
+     unsigned char *buf;
+     int len;
+{
+  putmessage (buf, len);
+
+  return getmessage (buf, 0);
+}
+
+/* Send a message to the remote machine.  */
+
+static int
+putmessage (buf, len)
+     unsigned char *buf;
+     int len;
+{
+  int i, enclen;
+  unsigned char csum = 0;
+  char buf2[PBUFSIZ], buf3[PBUFSIZ];
+  unsigned char header[3];
+  int ch;
+  int tcount = 0;
+  char *p;
+
+  /* Copy the packet into buffer BUF2, encapsulating it
+     and giving it a checksum.  */
+
+  if (len > 170)		/* Prosanity check */
+    abort();
+
+  if (remote_debug)
+    {
+      fprintf_unfiltered (gdb_stderr, "Message to send: \"");
+      for (i = 0; i < len; ++i)
+	fprintf_unfiltered (gdb_stderr, "%02x", buf[i]);
+      fprintf_unfiltered (gdb_stderr, "\"\n");
+    }
+
+  p = buf2;
+  *p++ = '$';
+
+  if (len % 3 != 0)
+    {
+      buf[len] = '\0';
+      buf[len+1] = '\0';
+    }
+
+  header[1] = next_msg_id;
+
+  header[2] = len;
+
+  csum = compute_checksum (csum, buf, len);
+  csum = compute_checksum (csum, header + 1, 2);
+
+  header[0] = csum;
+
+  tob64 (header, p, 3);
+  p += 4;
+  enclen = tob64 (buf, buf3, ((len + 2) / 3) * 3);
+
+  for (i = 0; i < enclen; ++i)
+    *p++ = buf3[i];
+  *p++ = '\r';
+  *p++ = '\n';
+
+  next_msg_id = (next_msg_id + 3) % 245;
+
+  /* Send it over and over until we get a positive ack.  */
+
+  while (1)
+    {
+      int started_error_output = 0;
+
+      if (remote_debug)
+	{
+	  *p = '\0';
+	  printf_unfiltered ("Sending encoded: \"%s\"", buf2);
+	  printf_unfiltered ("  (Checksum %d, id %d, length %d)\n",
+			     header[0], header[1], header[2]);
+	  gdb_flush (gdb_stdout);
+	}
+      if (SERIAL_WRITE (sds_desc, buf2, p - buf2))
+	perror_with_name ("putmessage: write failed");
+
+      return 1;
+
+    }
+
+}
+
+/* Come here after finding the start of the frame.  Collect the rest
+   into BUF.  Returns 0 on any error, 1 on success.  */
+
+static int
+read_frame (buf)
+     char *buf;
+{
+  char *bp;
+  int c;
+
+  bp = buf;
+
+  while (1)
+    {
+      c = readchar (sds_timeout);
+
+      switch (c)
+	{
+	case SERIAL_TIMEOUT:
+	  if (remote_debug)
+	    puts_filtered ("Timeout in mid-message, retrying\n");
+	  return 0;
+	case '$':
+	  if (remote_debug)
+	    puts_filtered ("Saw new packet start in middle of old one\n");
+	  return 0;		/* Start a new packet, count retries */
+	case '\r':
+	  break;
+
+	case '\n':
+	  {
+	    *bp = '\000';
+	    if (remote_debug)
+	      fprintf_unfiltered (gdb_stderr, "Received encoded: \"%s\"\n",
+				  buf);
+	    return 1;
+	  }
+
+	default:
+	  if (bp < buf + PBUFSIZ - 1)
+	    {
+	      *bp++ = c;
+	      continue;
+	    }
+
+	  *bp = '\0';
+	  puts_filtered ("Message too long: ");
+	  puts_filtered (buf);
+	  puts_filtered ("\n");
+
+	  return 0;
+	}
+    }
+}
+
+/* Read a packet from the remote machine, with error checking,
+   and store it in BUF.  BUF is expected to be of size PBUFSIZ.
+   If FOREVER, wait forever rather than timing out; this is used
+   while the target is executing user code.  */
+
+static int
+getmessage (buf, forever)
+     unsigned char *buf;
+     int forever;
+{
+  int c, c2, c3;
+  int tries;
+  int timeout;
+  int val, i, len, csum;
+  unsigned char header[3];
+  unsigned char inbuf[500];
+
+  strcpy (buf, "timeout");
+
+  if (forever)
+    {
+#ifdef MAINTENANCE_CMDS
+      timeout = watchdog > 0 ? watchdog : -1;
+#else
+      timeout = -1;
+#endif
+    }
+
+  else
+    timeout = sds_timeout;
+
+#define MAX_TRIES 3
+
+  for (tries = 1; tries <= MAX_TRIES; tries++)
+    {
+      /* This can loop forever if the remote side sends us characters
+	 continuously, but if it pauses, we'll get a zero from readchar
+	 because of timeout.  Then we'll count that as a retry.  */
+
+      /* Note that we will only wait forever prior to the start of a packet.
+	 After that, we expect characters to arrive at a brisk pace.  They
+	 should show up within sds_timeout intervals.  */
+
+      do
+	{
+	  c = readchar (timeout);
+
+	  if (c == SERIAL_TIMEOUT)
+	    {
+#ifdef MAINTENANCE_CMDS
+	      if (forever)	/* Watchdog went off.  Kill the target. */
+		{
+		  target_mourn_inferior ();
+		  error ("Watchdog has expired.  Target detached.\n");
+		}
+#endif
+	      if (remote_debug)
+		puts_filtered ("Timed out.\n");
+	      goto retry;
+	    }
+	}
+      while (c != '$' && c != '{');
+
+      /* We might have seen a "trigraph", a sequence of three characters
+	 that indicate various sorts of communication state.  */
+
+      if (c == '{')
+	{
+	  /* Read the other two chars of the trigraph. */
+	  c2 = readchar (timeout);
+	  c3 = readchar (timeout);
+	  if (remote_debug)
+	    fprintf_unfiltered (gdb_stderr, "Trigraph %c%c%c received\n",
+				c, c2, c3);
+	  if (c3 == '+')
+	    {
+	      message_pending = 1;
+	      return 0; /*????*/
+	    }
+	  continue;
+	}
+
+      val = read_frame (inbuf);
+
+      if (val == 1)
+	{
+	  fromb64 (inbuf, header, 4);
+	  /* (should check out other bits) */
+	  fromb64 (inbuf + 4, buf, strlen (inbuf) - 4);
+
+	  len = header[2];
+
+	  csum = 0;
+	  csum = compute_checksum (csum, buf, len);
+	  csum = compute_checksum (csum, header + 1, 2);
+
+	  if (csum != header[0])
+	    fprintf_unfiltered (gdb_stderr,
+				"Checksum mismatch: computed %d, received %d\n",
+				csum, header[0]);
+
+	  if (header[2] == 0xff)
+	    fprintf_unfiltered (gdb_stderr, "Requesting resend...\n");
+
+	  if (remote_debug)
+	    {
+	      fprintf_unfiltered (gdb_stderr,
+				  "... (Got checksum %d, id %d, length %d)\n",
+				  header[0], header[1], header[2]);
+	      fprintf_unfiltered (gdb_stderr, "Message received: \"");
+	      for (i = 0; i < len; ++i)
+		{
+		  fprintf_unfiltered (gdb_stderr, "%02x", (unsigned char) buf[i]);
+		}
+	      fprintf_unfiltered (gdb_stderr, "\"\n");
+	    }
+
+	  /* no ack required? */
+	  return len;
+	}
+
+      /* Try the whole thing again.  */
+    retry:
+      /* need to do something here */
+    }
+
+  /* We have tried hard enough, and just can't receive the packet.  Give up. */
+
+  printf_unfiltered ("Ignoring packet error, continuing...\n");
+  return 0;
+}
+
+static void
+sds_kill ()
+{
+  /* Don't try to do anything to the target.  */
+}
+
+static void
+sds_mourn ()
+{
+  unpush_target (&sds_ops);
+  generic_mourn_inferior ();
+}
+
+static void
+sds_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  inferior_pid = 42000;
+
+  /* Clean up from the last time we were running.  */
+  clear_proceed_status ();
+
+  /* Let the remote process run.  */
+  proceed (bfd_get_start_address (exec_bfd), TARGET_SIGNAL_0, 0);
+}
+
+static void
+sds_load (filename, from_tty)
+    char *filename;
+    int from_tty;
+{
+  generic_load (filename, from_tty);
+
+  inferior_pid = 0;
+}
+
+/* The SDS monitor has commands for breakpoint insertion, although it
+   it doesn't actually manage the breakpoints, it just returns the
+   replaced instruction back to the debugger.  */
+
+static int
+sds_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int i, retlen;
+  unsigned char *p, buf[PBUFSIZ];
+
+  p = buf;
+  *p++ = 16;
+  *p++ = 0;
+  *p++ = (int) (addr >> 24) & 0xff;
+  *p++ = (int) (addr >> 16) & 0xff;
+  *p++ = (int) (addr >>  8) & 0xff;
+  *p++ = (int) (addr      ) & 0xff;
+  
+  retlen = sds_send (buf, p - buf);
+
+  for (i = 0; i < 4; ++i)
+    contents_cache[i] = buf[i + 2];
+
+  return 0;
+}
+
+static int
+sds_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int i, retlen;
+  unsigned char *p, buf[PBUFSIZ];
+
+  p = buf;
+  *p++ = 17;
+  *p++ = 0;
+  *p++ = (int) (addr >> 24) & 0xff;
+  *p++ = (int) (addr >> 16) & 0xff;
+  *p++ = (int) (addr >>  8) & 0xff;
+  *p++ = (int) (addr      ) & 0xff;
+  for (i = 0; i < 4; ++i)
+    *p++ = contents_cache[i];
+
+  retlen = sds_send (buf, p - buf);
+
+  return 0;
+}
+
+static void 
+init_sds_ops ()
+{
+  sds_ops.to_shortname = "sds";
+  sds_ops.to_longname = "Remote serial target with SDS protocol";
+  sds_ops.to_doc = "Use a remote computer via a serial line; using the SDS protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  sds_ops.to_open = sds_open;
+  sds_ops.to_close = sds_close;
+  sds_ops.to_detach = sds_detach;
+  sds_ops.to_resume = sds_resume;
+  sds_ops.to_wait = sds_wait;
+  sds_ops.to_fetch_registers = sds_fetch_registers;
+  sds_ops.to_store_registers = sds_store_registers;
+  sds_ops.to_prepare_to_store = sds_prepare_to_store;
+  sds_ops.to_xfer_memory = sds_xfer_memory;
+  sds_ops.to_files_info = sds_files_info;
+  sds_ops.to_insert_breakpoint = sds_insert_breakpoint;
+  sds_ops.to_remove_breakpoint = sds_remove_breakpoint;
+  sds_ops.to_kill = sds_kill;
+  sds_ops.to_load = sds_load;
+  sds_ops.to_create_inferior = sds_create_inferior;
+  sds_ops.to_mourn_inferior = sds_mourn;
+  sds_ops.to_stratum = process_stratum;
+  sds_ops.to_has_all_memory = 1;
+  sds_ops.to_has_memory = 1;
+  sds_ops.to_has_stack = 1;
+  sds_ops.to_has_registers = 1;
+  sds_ops.to_has_execution = 1;
+  sds_ops.to_magic = OPS_MAGIC;
+}
+
+/* Put a command string, in args, out to the monitor and display the
+   reply message.  */
+
+static void
+sds_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *p;
+  int i, len, retlen;
+  unsigned char buf[1000];
+
+  /* Convert hexadecimal chars into a byte buffer.  */
+  p = args;
+  len = 0;
+  while (*p != '\0')
+    {
+      buf[len++] = fromhex (p[0]) * 16 + fromhex (p[1]);
+      if (p[1] == '\0')
+	break;
+      p += 2;
+    }
+
+  retlen = sds_send (buf, len);
+
+  printf_filtered ("Reply is ");
+  for (i = 0; i < retlen; ++i)
+    {
+      printf_filtered ("%02x", buf[i]);
+    }  
+  printf_filtered ("\n");
+}
+
+void
+_initialize_remote_sds ()
+{
+  init_sds_ops ();
+  add_target (&sds_ops);
+
+  add_show_from_set (add_set_cmd ("sdstimeout", no_class,
+				  var_integer, (char *)&sds_timeout,
+				  "Set timeout value for sds read.\n", &setlist),
+		     &showlist);
+
+  add_com ("sds", class_obscure, sds_command,
+	   "Send a command to the SDS monitor."); 
+}
diff --git a/gdb/remote-sim.c b/gdb/remote-sim.c
new file mode 100644
index 0000000..e10fced
--- /dev/null
+++ b/gdb/remote-sim.c
@@ -0,0 +1,1003 @@
+/* Generic remote debugging interface for simulators.
+   Copyright 1993, 1994, 1996, 1997 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+   Steve Chamberlain (sac@cygnus.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <setjmp.h>
+#include <errno.h>
+#include "terminal.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "callback.h"
+#include "remote-sim.h"
+#include "remote-utils.h"
+#include "command.h"
+
+/* Prototypes */
+
+static void dump_mem PARAMS ((char *buf, int len));
+
+static void init_callbacks PARAMS ((void));
+
+static void end_callbacks PARAMS ((void));
+
+static int gdb_os_write_stdout PARAMS ((host_callback *, const char *, int));
+
+static void gdb_os_flush_stdout PARAMS ((host_callback *));
+
+static int gdb_os_write_stderr PARAMS ((host_callback *, const char *, int));
+
+static void gdb_os_flush_stderr PARAMS ((host_callback *));
+
+static int gdb_os_poll_quit PARAMS ((host_callback *));
+
+/* printf_filtered is depreciated */
+static void gdb_os_printf_filtered PARAMS ((host_callback *, const char *, ...));
+
+static void gdb_os_vprintf_filtered PARAMS ((host_callback *, const char *, va_list));
+
+static void gdb_os_evprintf_filtered PARAMS ((host_callback *, const char *, va_list));
+
+static void gdb_os_error PARAMS ((host_callback *, const char *, ...));
+
+static void gdbsim_fetch_register PARAMS ((int regno));
+
+static void gdbsim_store_register PARAMS ((int regno));
+
+static void gdbsim_kill PARAMS ((void));
+
+static void gdbsim_load PARAMS ((char *prog, int fromtty));
+
+static void gdbsim_create_inferior PARAMS ((char *exec_file, char *args, char **env));
+
+static void gdbsim_open PARAMS ((char *args, int from_tty));
+
+static void gdbsim_close PARAMS ((int quitting));
+
+static void gdbsim_detach PARAMS ((char *args, int from_tty));
+
+static void gdbsim_resume PARAMS ((int pid, int step, enum target_signal siggnal));
+
+static int gdbsim_wait PARAMS ((int pid, struct target_waitstatus *status));
+
+static void gdbsim_prepare_to_store PARAMS ((void));
+
+static int gdbsim_xfer_inferior_memory PARAMS ((CORE_ADDR memaddr,
+						char *myaddr, int len,
+						int write,
+						struct target_ops *target));
+
+static void gdbsim_files_info PARAMS ((struct target_ops *target));
+
+static void gdbsim_mourn_inferior PARAMS ((void));
+
+static void gdbsim_stop PARAMS ((void));
+
+void simulator_command PARAMS ((char *args, int from_tty));
+
+/* Naming convention:
+
+   sim_* are the interface to the simulator (see remote-sim.h).
+   gdbsim_* are stuff which is internal to gdb.  */
+
+/* Forward data declarations */
+extern struct target_ops gdbsim_ops;
+
+static int program_loaded = 0;
+
+/* We must keep track of whether the simulator has been opened or not because
+   GDB can call a target's close routine twice, but sim_close doesn't allow
+   this.  We also need to record the result of sim_open so we can pass it
+   back to the other sim_foo routines.  */
+static SIM_DESC gdbsim_desc = 0;
+
+static void
+dump_mem (buf, len)
+     char *buf;
+     int len;
+{
+  if (len <= 8)
+    {
+      if (len == 8 || len == 4)
+	{
+	  long l[2];
+	  memcpy (l, buf, len);
+	  printf_filtered ("\t0x%x", l[0]);
+	  printf_filtered (len == 8 ? " 0x%x\n" : "\n", l[1]);
+	}
+      else
+	{
+	  int i;
+	  printf_filtered ("\t");
+	  for (i = 0; i < len; i++)
+	    printf_filtered ("0x%x ", buf[i]);
+	  printf_filtered ("\n");
+	}
+    }
+}
+
+static host_callback gdb_callback;
+static int callbacks_initialized = 0;
+
+/* Initialize gdb_callback.  */
+
+static void
+init_callbacks ()
+{
+  if (! callbacks_initialized)
+    {
+      gdb_callback = default_callback;
+      gdb_callback.init (&gdb_callback);
+      gdb_callback.write_stdout = gdb_os_write_stdout;
+      gdb_callback.flush_stdout = gdb_os_flush_stdout;
+      gdb_callback.write_stderr = gdb_os_write_stderr;
+      gdb_callback.flush_stderr = gdb_os_flush_stderr;
+      gdb_callback.printf_filtered = gdb_os_printf_filtered;
+      gdb_callback.vprintf_filtered = gdb_os_vprintf_filtered;
+      gdb_callback.evprintf_filtered = gdb_os_evprintf_filtered;
+      gdb_callback.error = gdb_os_error;
+      gdb_callback.poll_quit = gdb_os_poll_quit;
+      gdb_callback.magic = HOST_CALLBACK_MAGIC;
+      callbacks_initialized = 1;
+    }
+}
+
+/* Release callbacks (free resources used by them).  */
+
+static void
+end_callbacks ()
+{
+  if (callbacks_initialized)
+    {
+      gdb_callback.shutdown (&gdb_callback);
+      callbacks_initialized = 0;
+    }
+}
+
+/* GDB version of os_write_stdout callback.  */
+
+static int 
+gdb_os_write_stdout (p, buf, len)
+     host_callback *p;
+     const char *buf;
+     int len;
+{
+  int i;
+  char b[2];
+
+  for (i = 0; i < len; i++) 
+    {
+      b[0] = buf[i];
+      b[1] = 0;
+      if (target_output_hook)
+	target_output_hook (b);
+      else
+	fputs_filtered (b, gdb_stdout);
+    }
+  return len;
+}
+
+/* GDB version of os_flush_stdout callback.  */
+
+static void
+gdb_os_flush_stdout (p)
+     host_callback *p;
+{
+  gdb_flush (gdb_stdout);
+}
+
+/* GDB version of os_write_stderr callback.  */
+
+static int 
+gdb_os_write_stderr (p, buf, len)
+     host_callback *p;
+     const char *buf;
+     int len;
+{
+  int i;
+  char b[2];
+
+  for (i = 0; i < len; i++) 
+    {
+      b[0] = buf[i];
+      b[1] = 0;
+      if (target_output_hook)
+	target_output_hook (b);
+      else
+	fputs_filtered (b, gdb_stderr);
+    }
+  return len;
+}
+
+/* GDB version of os_flush_stderr callback.  */
+
+static void
+gdb_os_flush_stderr (p)
+     host_callback *p;
+{
+  gdb_flush (gdb_stderr);
+}
+
+/* GDB version of printf_filtered callback.  */
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+gdb_os_printf_filtered (host_callback *p, const char *format, ...)
+#else
+gdb_os_printf_filtered (p, va_alist)
+     host_callback *p;
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  char *format;
+
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+
+  vfprintf_filtered (gdb_stdout, format, args);
+
+  va_end (args);
+}
+
+/* GDB version of error vprintf_filtered.  */
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+gdb_os_vprintf_filtered (host_callback *p, const char *format, va_list ap)
+#else
+gdb_os_vprintf_filtered (p, format, ap)
+     host_callback *p;
+     char *format;
+     va_list ap;
+#endif
+{
+  vfprintf_filtered (gdb_stdout, format, ap);
+}
+
+/* GDB version of error evprintf_filtered.  */
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+gdb_os_evprintf_filtered (host_callback *p, const char *format, va_list ap)
+#else
+gdb_os_evprintf_filtered (p, format, ap)
+     host_callback *p;
+     char *format;
+     va_list ap;
+#endif
+{
+  vfprintf_filtered (gdb_stderr, format, ap);
+}
+
+/* GDB version of error callback.  */
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+gdb_os_error (host_callback *p, const char *format, ...)
+#else
+gdb_os_error (p, va_alist)
+     host_callback *p;
+     va_dcl
+#endif
+{
+  if (error_hook)
+    (*error_hook) ();
+  else 
+    {
+      va_list args;
+#ifdef ANSI_PROTOTYPES
+      va_start (args, format);
+#else
+      char *format;
+
+      va_start (args);
+      format = va_arg (args, char *);
+#endif
+
+      error_begin ();
+      vfprintf_filtered (gdb_stderr, format, args);
+      fprintf_filtered (gdb_stderr, "\n");
+      va_end (args);
+      return_to_top_level (RETURN_ERROR);
+    }
+}
+
+static void
+gdbsim_fetch_register (regno)
+     int regno;
+{
+  static int warn_user = 1;
+  if (regno == -1) 
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	gdbsim_fetch_register (regno);
+    }
+  else if (REGISTER_NAME (regno) != NULL && *REGISTER_NAME (regno) != '\0')
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+      int nr_bytes = sim_fetch_register (gdbsim_desc, regno, buf, REGISTER_RAW_SIZE (regno));
+      if (nr_bytes == 0)
+	/* register not applicable, supply zero's */
+	memset (buf, 0, MAX_REGISTER_RAW_SIZE);
+      else if (nr_bytes > 0 && nr_bytes != REGISTER_RAW_SIZE (regno)
+	       && warn_user)
+	{
+	  printf_unfiltered ("Size of register %s (%d) incorrect (%d instead of %d))",
+			     REGISTER_NAME (regno), regno,
+			     nr_bytes, REGISTER_RAW_SIZE (regno));
+	  warn_user = 0;
+	}
+      supply_register (regno, buf);
+      if (sr_get_debug ())
+	{
+	  printf_filtered ("gdbsim_fetch_register: %d", regno);
+	  /* FIXME: We could print something more intelligible.  */
+	  dump_mem (buf, REGISTER_RAW_SIZE (regno));
+	}
+    }
+}
+
+
+static void
+gdbsim_store_register (regno)
+     int regno;
+{
+  if (regno  == -1) 
+    {
+      for (regno = 0; regno < NUM_REGS; regno++)
+	gdbsim_store_register (regno);
+    }
+  else if (REGISTER_NAME (regno) != NULL && *REGISTER_NAME (regno) != '\0')
+    {
+      char tmp[MAX_REGISTER_RAW_SIZE];
+      int nr_bytes;
+      read_register_gen (regno, tmp);
+      nr_bytes = sim_store_register (gdbsim_desc, regno, tmp, REGISTER_RAW_SIZE (regno));
+      if (nr_bytes > 0 && nr_bytes != REGISTER_RAW_SIZE (regno))
+	fatal ("Register size different to expected");
+      if (sr_get_debug ())
+	{
+	  printf_filtered ("gdbsim_store_register: %d", regno);
+	  /* FIXME: We could print something more intelligible.  */
+	  dump_mem (tmp, REGISTER_RAW_SIZE (regno));
+	}
+    }
+}
+
+/* Kill the running program.  This may involve closing any open files
+   and releasing other resources acquired by the simulated program.  */
+
+static void
+gdbsim_kill ()
+{
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_kill\n");
+
+  /* There is no need to `kill' running simulator - the simulator is
+     not running */
+  inferior_pid = 0;
+}
+
+/* Load an executable file into the target process.  This is expected to
+   not only bring new code into the target process, but also to update
+   GDB's symbol tables to match.  */
+
+static void
+gdbsim_load (prog, fromtty)
+     char *prog;
+     int fromtty;
+{
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_load: prog \"%s\"\n", prog);
+
+  inferior_pid = 0;
+
+  /* FIXME: We will print two messages on error.
+     Need error to either not print anything if passed NULL or need
+     another routine that doesn't take any arguments.  */
+  if (sim_load (gdbsim_desc, prog, NULL, fromtty) == SIM_RC_FAIL)
+    error ("unable to load program");
+
+  /* FIXME: If a load command should reset the targets registers then
+     a call to sim_create_inferior() should go here. */
+
+  program_loaded = 1;
+}
+
+
+/* Start an inferior process and set inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().
+   On VxWorks and various standalone systems, we ignore exec_file.  */
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+
+static void
+gdbsim_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  int len;
+  char *arg_buf,**argv;
+
+  if (exec_file == 0 || exec_bfd == 0)
+    warning ("No executable file specified.");
+  if (! program_loaded)
+    warning ("No program loaded.");
+
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_create_inferior: exec_file \"%s\", args \"%s\"\n",
+		     (exec_file ? exec_file: "(NULL)"),
+		     args);
+
+  gdbsim_kill ();	 
+  remove_breakpoints ();
+  init_wait_for_inferior ();
+
+  if (exec_file != NULL)
+    {
+      len = strlen (exec_file) + 1 + strlen (args) + 1 + /*slop*/ 10;
+      arg_buf = (char *) alloca (len);
+      arg_buf[0] = '\0';
+      strcat (arg_buf, exec_file);
+      strcat (arg_buf, " ");
+      strcat (arg_buf, args);
+      argv = buildargv (arg_buf);
+      make_cleanup ((make_cleanup_func) freeargv, argv);
+    }
+  else
+    argv = NULL;
+  sim_create_inferior (gdbsim_desc, exec_bfd, argv, env);
+
+  inferior_pid = 42;
+  insert_breakpoints (); /* Needed to get correct instruction in cache */
+
+  clear_proceed_status ();
+
+  /* NB: Entry point already set by sim_create_inferior. */
+  proceed ((CORE_ADDR)-1, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* The open routine takes the rest of the parameters from the command,
+   and (if successful) pushes a new target onto the stack.
+   Targets should supply this routine, if only to provide an error message.  */
+/* Called when selecting the simulator. EG: (gdb) target sim name.  */
+
+static void
+gdbsim_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int len;
+  char *arg_buf;
+  char **argv;
+
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_open: args \"%s\"\n", args ? args : "(null)");
+
+  /* Remove current simulator if one exists.  Only do this if the simulator
+     has been opened because sim_close requires it.
+     This is important because the call to push_target below will cause
+     sim_close to be called if the simulator is already open, but push_target
+     is called after sim_open!  We can't move the call to push_target before
+     the call to sim_open because sim_open may invoke `error'.  */
+  if (gdbsim_desc != NULL)
+    unpush_target (&gdbsim_ops);
+
+  len = (7 + 1 /* gdbsim */
+	 + strlen (" -E little")
+	 + strlen (" --architecture=xxxxxxxxxx")
+	 + (args ? strlen (args) : 0)
+	 + 50) /* slack */;
+  arg_buf = (char *) alloca (len);
+  strcpy (arg_buf, "gdbsim"); /* 7 */
+  /* Specify the byte order for the target when it is both selectable
+     and explicitly specified by the user (not auto detected). */
+  if (TARGET_BYTE_ORDER_SELECTABLE_P
+      && !TARGET_BYTE_ORDER_AUTO)
+    {
+      switch (TARGET_BYTE_ORDER)
+	{
+	case BIG_ENDIAN:
+	  strcat (arg_buf, " -E big");
+	  break;
+	case LITTLE_ENDIAN:
+	  strcat (arg_buf, " -E little");
+	  break;
+	default:
+	  fatal ("Value of TARGET_BYTE_ORDER unknown");
+	}
+    }
+  /* Specify the architecture of the target when it has been
+     explicitly specified */
+  if (!TARGET_ARCHITECTURE_AUTO)
+    {
+      strcat (arg_buf, " --architecture=");
+      strcat (arg_buf, TARGET_ARCHITECTURE->printable_name);
+    }
+  /* finally, any explicit args */
+  if (args)
+    {
+      strcat (arg_buf, " "); /* 1 */
+      strcat (arg_buf, args);
+    }
+  argv = buildargv (arg_buf);
+  if (argv == NULL)
+    error ("Insufficient memory available to allocate simulator arg list.");
+  make_cleanup ((make_cleanup_func) freeargv, argv);
+
+  init_callbacks ();
+  gdbsim_desc = sim_open (SIM_OPEN_DEBUG, &gdb_callback, exec_bfd, argv);
+
+  if (gdbsim_desc == 0)
+    error ("unable to create simulator instance");
+
+  push_target (&gdbsim_ops);
+  target_fetch_registers (-1);
+  printf_filtered ("Connected to the simulator.\n");
+}
+
+/* Does whatever cleanup is required for a target that we are no longer
+   going to be calling.  Argument says whether we are quitting gdb and
+   should not get hung in case of errors, or whether we want a clean
+   termination even if it takes a while.  This routine is automatically
+   always called just before a routine is popped off the target stack.
+   Closing file descriptors and freeing memory are typical things it should
+   do.  */
+/* Close out all files and local state before this target loses control. */
+
+static void
+gdbsim_close (quitting)
+     int quitting;
+{
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_close: quitting %d\n", quitting);
+
+  program_loaded = 0;
+
+  if (gdbsim_desc != NULL)
+    {
+      sim_close (gdbsim_desc, quitting);
+      gdbsim_desc = NULL;
+    }
+
+  end_callbacks ();
+}
+
+/* Takes a program previously attached to and detaches it.
+   The program may resume execution (some targets do, some don't) and will
+   no longer stop on signals, etc.  We better not have left any breakpoints
+   in the program or it'll die when it hits one.  ARGS is arguments
+   typed by the user (e.g. a signal to send the process).  FROM_TTY
+   says whether to be verbose or not.  */
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else with your gdb.  */
+
+static void
+gdbsim_detach (args,from_tty)
+     char *args;
+     int from_tty;
+{
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_detach: args \"%s\"\n", args);
+
+  pop_target ();		/* calls gdbsim_close to do the real work */
+  if (from_tty)
+    printf_filtered ("Ending simulator %s debugging\n", target_shortname);
+}
+ 
+/* Resume execution of the target process.  STEP says whether to single-step
+   or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given
+   to the target, or zero for no signal.  */
+
+static enum target_signal resume_siggnal;
+static int resume_step;
+
+static void
+gdbsim_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  if (inferior_pid != 42)
+    error ("The program is not being run.");
+
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_resume: step %d, signal %d\n", step, siggnal);
+
+  resume_siggnal = siggnal;
+  resume_step = step;
+}
+
+/* Notify the simulator of an asynchronous request to stop.
+   
+   The simulator shall ensure that the stop request is eventually
+   delivered to the simulator.  If the call is made while the
+   simulator is not running then the stop request is processed when
+   the simulator is next resumed.
+
+   For simulators that do not support this operation, just abort */
+
+static void
+gdbsim_stop ()
+{
+  if (! sim_stop (gdbsim_desc))
+    {
+      quit ();
+    }
+}
+
+/* GDB version of os_poll_quit callback.
+   Taken from gdb/util.c - should be in a library */
+
+static int
+gdb_os_poll_quit (p)
+     host_callback *p;
+{
+  notice_quit ();
+  if (quit_flag) /* gdb's idea of quit */
+    {
+      quit_flag = 0; /* we've stolen it */
+      return 1;
+    }
+  else if (immediate_quit)
+    {
+      return 1;
+    }
+  return 0;
+}
+
+/* Wait for inferior process to do something.  Return pid of child,
+   or -1 in case of error; store status through argument pointer STATUS,
+   just as `wait' would. */
+
+static void
+gdbsim_cntrl_c (signo)
+     int signo;
+{
+  gdbsim_stop ();
+}
+
+static int
+gdbsim_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  static RETSIGTYPE (*prev_sigint) ();
+  int sigrc = 0;
+  enum sim_stop reason = sim_running;
+
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_wait\n");
+
+#if defined (HAVE_SIGACTION) && defined (SA_RESTART)
+  {
+    struct sigaction sa, osa;
+    sa.sa_handler = gdbsim_cntrl_c;
+    sigemptyset (&sa.sa_mask);
+    sa.sa_flags = 0;
+    sigaction (SIGINT, &sa, &osa);
+    prev_sigint = osa.sa_handler;
+  }
+#else
+  prev_sigint = signal (SIGINT, gdbsim_cntrl_c);
+#endif
+  sim_resume (gdbsim_desc, resume_step,
+	      target_signal_to_host (resume_siggnal));
+  signal (SIGINT, prev_sigint);
+  resume_step = 0;
+
+  sim_stop_reason (gdbsim_desc, &reason, &sigrc);
+
+  switch (reason)
+    {
+    case sim_exited:
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = sigrc;
+      break;
+    case sim_stopped:
+      switch (sigrc)
+	{
+	case SIGABRT:
+	  quit ();
+	  break;
+	case SIGINT:
+	case SIGTRAP:
+	default:
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  /* The signal in sigrc is a host signal.  That probably
+	     should be fixed.  */
+	  status->value.sig = target_signal_from_host (sigrc);
+	  break;
+	}
+      break;
+    case sim_signalled:
+      status->kind = TARGET_WAITKIND_SIGNALLED;
+      /* The signal in sigrc is a host signal.  That probably
+	 should be fixed.  */
+      status->value.sig = target_signal_from_host (sigrc);
+      break;
+    case sim_running:
+    case sim_polling:
+      /* FIXME: Is this correct? */
+      break;
+    }
+
+  return inferior_pid;
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+gdbsim_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static int
+gdbsim_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;			/* ignored */
+{
+  if (! program_loaded)
+    error ("No program loaded.");
+
+  if (sr_get_debug ())
+    {
+      printf_filtered ("gdbsim_xfer_inferior_memory: myaddr 0x%x, memaddr 0x%x, len %d, write %d\n",
+		       myaddr, memaddr, len, write);
+      if (sr_get_debug () && write)
+	dump_mem(myaddr, len);
+    }
+
+  if (write)
+    {
+      len = sim_write (gdbsim_desc, memaddr, myaddr, len);
+    }
+  else 
+    {
+      len = sim_read (gdbsim_desc, memaddr, myaddr, len);
+      if (sr_get_debug () && len > 0)
+	dump_mem(myaddr, len);
+    } 
+  return len;
+}
+
+static void
+gdbsim_files_info (target)
+     struct target_ops *target;
+{
+  char *file = "nothing";
+
+  if (exec_bfd)
+    file = bfd_get_filename (exec_bfd);
+
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_files_info: file \"%s\"\n", file);
+
+  if (exec_bfd)
+    {
+      printf_filtered ("\tAttached to %s running program %s\n",
+		       target_shortname, file);
+      sim_info (gdbsim_desc, 0);
+    }
+}
+
+/* Clear the simulator's notion of what the break points are.  */
+
+static void
+gdbsim_mourn_inferior () 
+{ 
+  if (sr_get_debug ())
+    printf_filtered ("gdbsim_mourn_inferior:\n");
+
+  remove_breakpoints ();
+  generic_mourn_inferior ();
+}
+
+static int
+gdbsim_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+#ifdef SIM_HAS_BREAKPOINTS
+  SIM_RC retcode;
+
+  retcode = sim_set_breakpoint (gdbsim_desc, addr);
+
+  switch (retcode)
+    {
+    case SIM_RC_OK:
+      return 0;
+    case SIM_RC_INSUFFICIENT_RESOURCES:
+      return ENOMEM;
+    default:
+      return EIO;
+    }
+#else
+  return memory_insert_breakpoint (addr, contents_cache);
+#endif
+}
+
+static int
+gdbsim_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+#ifdef SIM_HAS_BREAKPOINTS
+  SIM_RC retcode;
+
+  retcode = sim_clear_breakpoint (gdbsim_desc, addr);
+
+  switch (retcode)
+    {
+    case SIM_RC_OK:
+    case SIM_RC_UNKNOWN_BREAKPOINT:
+      return 0;
+    case SIM_RC_INSUFFICIENT_RESOURCES:
+      return ENOMEM;
+    default:
+      return EIO;
+    }
+#else
+  return memory_remove_breakpoint (addr, contents_cache);
+#endif
+}
+
+/* Pass the command argument through to the simulator verbatim.  The
+   simulator must do any command interpretation work.  */
+
+void
+simulator_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (gdbsim_desc == NULL)
+    {
+
+      /* PREVIOUSLY: The user may give a command before the simulator
+         is opened. [...] (??? assuming of course one wishes to
+         continue to allow commands to be sent to unopened simulators,
+         which isn't entirely unreasonable). */
+
+      /* The simulator is a builtin abstraction of a remote target.
+         Consistent with that model, access to the simulator, via sim
+         commands, is restricted to the period when the channel to the
+         simulator is open. */
+
+      error ("Not connected to the simulator target");
+    }
+
+  sim_do_command (gdbsim_desc, args);
+
+  /* Invalidate the register cache, in case the simulator command does
+     something funny. */
+  registers_changed (); 
+}
+
+/* Define the target subroutine names */
+
+struct target_ops gdbsim_ops ;
+
+static void 
+init_gdbsim_ops(void)
+{
+  gdbsim_ops.to_shortname =   "sim";		
+  gdbsim_ops.to_longname =   "simulator";		
+  gdbsim_ops.to_doc =   "Use the compiled-in simulator.";  
+  gdbsim_ops.to_open =   gdbsim_open;		
+  gdbsim_ops.to_close =   gdbsim_close;		
+  gdbsim_ops.to_attach =   NULL;
+  gdbsim_ops.to_post_attach = NULL;  
+  gdbsim_ops.to_require_attach = NULL;	
+  gdbsim_ops.to_detach =   gdbsim_detach;
+  gdbsim_ops.to_require_detach = NULL;	
+  gdbsim_ops.to_resume =   gdbsim_resume;	
+  gdbsim_ops.to_wait  =   gdbsim_wait;
+  gdbsim_ops.to_post_wait = NULL;		
+  gdbsim_ops.to_fetch_registers  =   gdbsim_fetch_register;
+  gdbsim_ops.to_store_registers  =   gdbsim_store_register;
+  gdbsim_ops.to_prepare_to_store =   gdbsim_prepare_to_store;
+  gdbsim_ops.to_xfer_memory  =   gdbsim_xfer_inferior_memory;
+  gdbsim_ops.to_files_info  =   gdbsim_files_info;	
+  gdbsim_ops.to_insert_breakpoint =   gdbsim_insert_breakpoint;
+  gdbsim_ops.to_remove_breakpoint =   gdbsim_remove_breakpoint;
+  gdbsim_ops.to_terminal_init  =   NULL;		
+  gdbsim_ops.to_terminal_inferior =   NULL;		
+  gdbsim_ops.to_terminal_ours_for_output =   NULL;
+  gdbsim_ops.to_terminal_ours  =   NULL;
+  gdbsim_ops.to_terminal_info  =   NULL;
+  gdbsim_ops.to_kill  =   gdbsim_kill;	
+  gdbsim_ops.to_load  =   gdbsim_load;	
+  gdbsim_ops.to_lookup_symbol =   NULL;	
+  gdbsim_ops.to_create_inferior =   gdbsim_create_inferior;
+  gdbsim_ops.to_post_startup_inferior = NULL;
+  gdbsim_ops.to_acknowledge_created_inferior = NULL;
+  gdbsim_ops.to_clone_and_follow_inferior = NULL;
+  gdbsim_ops.to_post_follow_inferior_by_clone = NULL;
+  gdbsim_ops.to_insert_fork_catchpoint = NULL;
+  gdbsim_ops.to_remove_fork_catchpoint = NULL;
+  gdbsim_ops.to_insert_vfork_catchpoint = NULL;
+  gdbsim_ops.to_remove_vfork_catchpoint = NULL;
+  gdbsim_ops.to_has_forked = NULL;
+  gdbsim_ops.to_has_vforked = NULL;
+  gdbsim_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  gdbsim_ops.to_post_follow_vfork = NULL;
+  gdbsim_ops.to_insert_exec_catchpoint = NULL;
+  gdbsim_ops.to_remove_exec_catchpoint = NULL;
+  gdbsim_ops.to_has_execd = NULL;
+  gdbsim_ops.to_reported_exec_events_per_exec_call = NULL;
+  gdbsim_ops.to_has_exited = NULL;
+  gdbsim_ops.to_mourn_inferior =   gdbsim_mourn_inferior;
+  gdbsim_ops.to_can_run  =   0;			
+  gdbsim_ops.to_notice_signals =   0;		
+  gdbsim_ops.to_thread_alive  =   0;		
+  gdbsim_ops.to_stop  =   gdbsim_stop;
+  gdbsim_ops.to_pid_to_exec_file = NULL;	
+  gdbsim_ops.to_core_file_to_sym_file = NULL;	
+  gdbsim_ops.to_stratum =   process_stratum;	
+  gdbsim_ops.DONT_USE =   NULL;		
+  gdbsim_ops.to_has_all_memory =   1;	
+  gdbsim_ops.to_has_memory =   1;	
+  gdbsim_ops.to_has_stack =   1;	
+  gdbsim_ops.to_has_registers =   1;	
+  gdbsim_ops.to_has_execution =   1;	
+  gdbsim_ops.to_sections =   NULL;	
+  gdbsim_ops.to_sections_end =   NULL;	
+  gdbsim_ops.to_magic =   OPS_MAGIC;	
+
+#ifdef TARGET_REDEFINE_DEFAULT_OPS
+  TARGET_REDEFINE_DEFAULT_OPS (&gdbsim_ops);
+#endif
+}
+
+void
+_initialize_remote_sim ()
+{
+  init_gdbsim_ops() ;
+  add_target (&gdbsim_ops);
+
+  add_com ("sim <command>", class_obscure, simulator_command,
+	   "Send a command to the simulator."); 
+}
diff --git a/gdb/remote-st.c b/gdb/remote-st.c
new file mode 100644
index 0000000..1efdbfa
--- /dev/null
+++ b/gdb/remote-st.c
@@ -0,0 +1,879 @@
+/* Remote debugging interface for Tandem ST2000 phone switch, for GDB.
+   Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Jim Kingdon for Cygnus.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This file was derived from remote-eb.c, which did a similar job, but for
+   an AMD-29K running EBMON.  That file was in turn derived from remote.c
+   as mentioned in the following comment (left in for comic relief):
+
+  "This is like remote.c but is for an esoteric situation--
+   having an a29k board in a PC hooked up to a unix machine with
+   a serial line, and running ctty com1 on the PC, through which
+   the unix machine can run ebmon.  Not to mention that the PC
+   has PC/NFS, so it can access the same executables that gdb can,
+   over the net in real time."
+
+   In reality, this module talks to a debug monitor called 'STDEBUG', which
+   runs in a phone switch.  We communicate with STDEBUG via either a direct
+   serial line, or a TCP (or possibly TELNET) stream to a terminal multiplexor,
+   which in turn talks to the phone switch. */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "wait.h"
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+#include <signal.h>
+#include "gdb_string.h"
+#include <sys/types.h>
+#include "serial.h"
+
+extern struct target_ops st2000_ops;		/* Forward declaration */
+
+static void st2000_close();
+static void st2000_fetch_register();
+static void st2000_store_register();
+
+#define LOG_FILE "st2000.log"
+#if defined (LOG_FILE)
+FILE *log_file;
+#endif
+
+static int timeout = 24;
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   st2000_open knows that we don't have a file open when the program
+   starts.  */
+
+static serial_t st2000_desc;
+
+/* Send data to stdebug.  Works just like printf. */
+
+static void
+#ifdef ANSI_PROTOTYPES
+printf_stdebug(char *pattern, ...)
+#else
+printf_stdebug(va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char buf[200];
+
+#ifdef ANSI_PROTOTYPES
+  va_start(args, pattern);
+#else
+  char *pattern;
+  va_start(args);
+  pattern = va_arg(args, char *);
+#endif
+
+  vsprintf(buf, pattern, args);
+  va_end(args);
+
+  if (SERIAL_WRITE(st2000_desc, buf, strlen(buf)))
+    fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+}
+
+/* Read a character from the remote system, doing all the fancy timeout
+   stuff.  */
+
+static int
+readchar(timeout)
+     int timeout;
+{
+  int c;
+
+  c = SERIAL_READCHAR(st2000_desc, timeout);
+
+#ifdef LOG_FILE
+  putc(c & 0x7f, log_file);
+#endif
+
+  if (c >= 0)
+    return c & 0x7f;
+
+  if (c == SERIAL_TIMEOUT)
+    {
+      if (timeout == 0)
+	return c;		/* Polls shouldn't generate timeout errors */
+
+      error("Timeout reading from remote system.");
+    }
+
+  perror_with_name("remote-st2000");
+}
+
+/* Scan input from the remote system, until STRING is found.  If DISCARD is
+   non-zero, then discard non-matching input, else print it out.
+   Let the user break out immediately.  */
+static void
+expect(string, discard)
+     char *string;
+     int discard;
+{
+  char *p = string;
+  int c;
+
+  immediate_quit = 1;
+  while (1)
+    {
+      c = readchar(timeout);
+      if (c == *p++)
+	{
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      return;
+	    }
+	}
+      else
+	{
+	  if (!discard)
+	    {
+	      fwrite(string, 1, (p - 1) - string, stdout);
+	      putchar((char)c);
+	      fflush(stdout);
+	    }
+	  p = string;
+	}
+    }
+}
+
+/* Keep discarding input until we see the STDEBUG prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  st2000_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a st2000_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt(discard)
+     int discard;
+{
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush(log_file);
+#endif
+  expect ("dbug> ", discard);
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit(ignore_space)
+     int ignore_space;
+{
+  int ch;
+  while (1)
+    {
+      ch = readchar(timeout);
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt(1);
+	  error("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from stdebug and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Get N 32-bit words from remote, each preceded by a space,
+   and put them in registers starting at REGNO.  */
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+  long val;
+  int i;
+
+  for (i = 0; i < n; i++)
+    {
+      int j;
+      
+      val = 0;
+      for (j = 0; j < 8; j++)
+	val = (val << 4) + get_hex_digit (j == 0);
+      supply_register (regno++, (char *) &val);
+    }
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+st2000_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error("Can't pass arguments to remote STDEBUG process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+/* The "process" (board) is already stopped awaiting our commands, and
+   the program is already downloaded.  We just set its PC and go.  */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  /* Let 'er rip... */
+  proceed ((CORE_ADDR)entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static int baudrate = 9600;
+static char dev_name[100];
+
+static void
+st2000_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int n;
+  char junk[100];
+
+  target_preopen(from_tty);
+  
+  n = sscanf(args, " %s %d %s", dev_name, &baudrate, junk);
+
+  if (n != 2)
+    error("Bad arguments.  Usage: target st2000 <device> <speed>\n\
+or target st2000 <host> <port>\n");
+
+  st2000_close(0);
+
+  st2000_desc = SERIAL_OPEN(dev_name);
+
+  if (!st2000_desc)
+    perror_with_name(dev_name);
+
+  SERIAL_SETBAUDRATE(st2000_desc, baudrate);
+
+  SERIAL_RAW(st2000_desc);
+
+  push_target(&st2000_ops);
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+#endif
+
+  /* Hello?  Are you there?  */
+  printf_stdebug("\003");	/* ^C wakes up dbug */
+  
+  expect_prompt(1);
+
+  if (from_tty)
+    printf("Remote %s connected to %s\n", target_shortname,
+	   dev_name);
+}
+
+/* Close out all files and local state before this target loses control. */
+
+static void
+st2000_close (quitting)
+     int quitting;
+{
+  SERIAL_CLOSE(st2000_desc);
+
+#if defined (LOG_FILE)
+  if (log_file) {
+    if (ferror(log_file))
+      fprintf(stderr, "Error writing log file.\n");
+    if (fclose(log_file) != 0)
+      fprintf(stderr, "Error closing log file.\n");
+  }
+#endif
+}
+
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+static void
+st2000_detach (from_tty)
+     int from_tty;
+{
+  pop_target();		/* calls st2000_close to do the real work */
+  if (from_tty)
+    printf ("Ending remote %s debugging\n", target_shortname);
+}
+ 
+/* Tell the remote machine to resume.  */
+
+static void
+st2000_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  if (step)
+    {
+      printf_stdebug ("ST\r");
+      /* Wait for the echo.  */
+      expect ("ST\r", 1);
+    }
+  else
+    {
+      printf_stdebug ("GO\r");
+      /* Swallow the echo.  */
+      expect ("GO\r", 1);
+    }
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+static int
+st2000_wait (status)
+     struct target_waitstatus *status;
+{
+  int old_timeout = timeout;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+
+  expect_prompt(0);    /* Wait for prompt, outputting extraneous text */
+
+  status->kind = TARGET_WAITKIND_STOPPED;
+  status->value.sig = TARGET_SIGNAL_TRAP;
+
+  timeout = old_timeout;
+
+  return 0;
+}
+
+/* Return the name of register number REGNO in the form input and output by
+   STDEBUG.  Currently, REGISTER_NAMES just happens to contain exactly what
+   STDEBUG wants.  Lets take advantage of that just as long as possible! */
+
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char buf[50];
+  const char *p;
+  char *b;
+
+  b = buf;
+
+  for (p = REGISTER_NAME (regno); *p; p++)
+    *b++ = toupper(*p);
+  *b = '\000';
+
+  return buf;
+}
+
+/* Read the remote registers into the block REGS.  */
+
+static void
+st2000_fetch_registers ()
+{
+  int regno;
+
+  /* Yeah yeah, I know this is horribly inefficient.  But it isn't done
+     very often...  I'll clean it up later.  */
+
+  for (regno = 0; regno <= PC_REGNUM; regno++)
+    st2000_fetch_register(regno);
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.
+   Returns errno value.  */
+static void
+st2000_fetch_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    st2000_fetch_registers ();
+  else
+    {
+      char *name = get_reg_name (regno);
+      printf_stdebug ("DR %s\r", name);
+      expect (name, 1);
+      expect (" : ", 1);
+      get_hex_regs (1, regno);
+      expect_prompt (1);
+    }
+  return;
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+st2000_store_registers ()
+{
+  int regno;
+
+  for (regno = 0; regno <= PC_REGNUM; regno++)
+    st2000_store_register(regno);
+
+  registers_changed ();
+}
+
+/* Store register REGNO, or all if REGNO == 0.
+   Return errno value.  */
+static void
+st2000_store_register (regno)
+     int regno;
+{
+  if (regno == -1)
+    st2000_store_registers ();
+  else
+    {
+      printf_stdebug ("PR %s %x\r", get_reg_name (regno),
+		      read_register (regno));
+
+      expect_prompt (1);
+    }
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+st2000_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+st2000_files_info ()
+{
+  printf ("\tAttached to %s at %d baud.\n",
+	  dev_name, baudrate);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns length moved.  */
+static int
+st2000_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int i;
+
+  for (i = 0; i < len; i++)
+    {
+      printf_stdebug ("PM.B %x %x\r", memaddr + i, myaddr[i]);
+      expect_prompt (1);
+    }
+  return len;
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns length moved.  */
+static int
+st2000_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i;
+
+  /* Number of bytes read so far.  */
+  int count;
+
+  /* Starting address of this pass.  */
+  unsigned long startaddr;
+
+  /* Number of bytes to read in this pass.  */
+  int len_this_pass;
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     st2000_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len to memaddr and gets 0.  */
+  /* However, something like
+     st2000_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+  if (((memaddr - 1) + len) < memaddr) {
+    errno = EIO;
+    return 0;
+  }
+  
+  startaddr = memaddr;
+  count = 0;
+  while (count < len)
+    {
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	len_this_pass -= startaddr % 16;
+      if (len_this_pass > (len - count))
+	len_this_pass = (len - count);
+
+      printf_stdebug ("DI.L %x %x\r", startaddr, len_this_pass);
+      expect (":  ", 1);
+
+      for (i = 0; i < len_this_pass; i++)
+	get_hex_byte (&myaddr[count++]);
+
+      expect_prompt (1);
+
+      startaddr += len_this_pass;
+    }
+  return len;
+}
+
+/* FIXME-someday!  Merge these two.  */
+static int
+st2000_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  if (write)
+    return st2000_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return st2000_read_inferior_memory (memaddr, myaddr, len);
+}
+
+static void
+st2000_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* Ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+st2000_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&st2000_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define MAX_STDEBUG_BREAKPOINTS 16
+
+static CORE_ADDR breakaddr[MAX_STDEBUG_BREAKPOINTS] = {0};
+
+static int
+st2000_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+  CORE_ADDR bp_addr = addr;
+  int bp_size = 0;
+
+  BREAKPOINT_FROM_PC (&bp_addr, &bp_size);
+
+  for (i = 0; i <= MAX_STDEBUG_BREAKPOINTS; i++)
+    if (breakaddr[i] == 0)
+      {
+	breakaddr[i] = addr;
+
+	st2000_read_inferior_memory (bp_addr, shadow, bp_size);
+	printf_stdebug("BR %x H\r", addr);
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Too many breakpoints (> 16) for STDBUG\n");
+  return 1;
+}
+
+static int
+st2000_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+  for (i = 0; i < MAX_STDEBUG_BREAKPOINTS; i++)
+    if (breakaddr[i] == addr)
+      {
+	breakaddr[i] = 0;
+
+	printf_stdebug("CB %d\r", i);
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+
+/* Put a command string, in args, out to STDBUG.  Output from STDBUG is placed
+   on the users terminal until the prompt is seen. */
+
+static void
+st2000_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  if (!st2000_desc)
+    error("st2000 target not open.");
+  
+  if (!args)
+    error("Missing command.");
+	
+  printf_stdebug("%s\r", args);
+  expect_prompt(0);
+}
+
+/* Connect the user directly to STDBUG.  This command acts just like the
+   'cu' or 'tip' command.  Use <CR>~. or <CR>~^D to break out.  */
+
+/*static struct ttystate ttystate;*/
+
+static void
+cleanup_tty()
+{
+  printf("\r\n[Exiting connect mode]\r\n");
+/*  SERIAL_RESTORE(0, &ttystate);*/
+}
+
+#if 0
+/* This all should now be in serial.c */
+
+static void
+connect_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  fd_set readfds;
+  int numfds;
+  int c;
+  char cur_esc = 0;
+
+  dont_repeat();
+
+  if (st2000_desc < 0)
+    error("st2000 target not open.");
+  
+  if (args)
+    fprintf("This command takes no args.  They have been ignored.\n");
+	
+  printf("[Entering connect mode.  Use ~. or ~^D to escape]\n");
+
+  serial_raw(0, &ttystate);
+
+  make_cleanup(cleanup_tty, 0);
+
+  FD_ZERO(&readfds);
+
+  while (1)
+    {
+      do
+	{
+	  FD_SET(0, &readfds);
+	  FD_SET(st2000_desc, &readfds);
+	  numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
+	}
+      while (numfds == 0);
+
+      if (numfds < 0)
+	perror_with_name("select");
+
+      if (FD_ISSET(0, &readfds))
+	{			/* tty input, send to stdebug */
+	  c = getchar();
+	  if (c < 0)
+	    perror_with_name("connect");
+
+	  printf_stdebug("%c", c);
+	  switch (cur_esc)
+	    {
+	    case 0:
+	      if (c == '\r')
+		cur_esc = c;
+	      break;
+	    case '\r':
+	      if (c == '~')
+		cur_esc = c;
+	      else
+		cur_esc = 0;
+	      break;
+	    case '~':
+	      if (c == '.' || c == '\004')
+		return;
+	      else
+		cur_esc = 0;
+	    }
+	}
+
+      if (FD_ISSET(st2000_desc, &readfds))
+	{
+	  while (1)
+	    {
+	      c = readchar(0);
+	      if (c < 0)
+		break;
+	      putchar(c);
+	    }
+	  fflush(stdout);
+	}
+    }
+}
+#endif /* 0 */
+
+/* Define the target subroutine names */
+
+struct target_ops st2000_ops ;
+
+static void 
+init_st2000_ops(void)
+{
+  st2000_ops.to_shortname =   "st2000";
+  st2000_ops.to_longname =   "Remote serial Tandem ST2000 target";
+  st2000_ops.to_doc =   "Use a remote computer running STDEBUG connected by a serial line;\n\
+or a network connection.\n\
+Arguments are the name of the device for the serial line,\n\
+the speed to connect at in bits per second." ;
+  st2000_ops.to_open =   st2000_open;
+  st2000_ops.to_close =   st2000_close;
+  st2000_ops.to_attach =   0;
+  st2000_run_ops.to_post_attach = NULL;
+  st2000_ops.to_require_attach = NULL;
+  st2000_ops.to_detach =   st2000_detach;
+  st2000_ops.to_require_detach = NULL;
+  st2000_ops.to_resume =   st2000_resume;
+  st2000_ops.to_wait  =   st2000_wait;
+  st2000_ops.to_post_wait = NULL;
+  st2000_ops.to_fetch_registers  =   st2000_fetch_register;
+  st2000_ops.to_store_registers  =   st2000_store_register;
+  st2000_ops.to_prepare_to_store =   st2000_prepare_to_store;
+  st2000_ops.to_xfer_memory  =   st2000_xfer_inferior_memory;
+  st2000_ops.to_files_info  =   st2000_files_info;
+  st2000_ops.to_insert_breakpoint =   st2000_insert_breakpoint;
+  st2000_ops.to_remove_breakpoint =   st2000_remove_breakpoint;	/* Breakpoints */
+  st2000_ops.to_terminal_init  =   0;
+  st2000_ops.to_terminal_inferior =   0;
+  st2000_ops.to_terminal_ours_for_output =   0;
+  st2000_ops.to_terminal_ours  =   0;
+  st2000_ops.to_terminal_info  =   0;				/* Terminal handling */
+  st2000_ops.to_kill  =   st2000_kill;
+  st2000_ops.to_load  =   0;				/* load */
+  st2000_ops.to_lookup_symbol =   0;				/* lookup_symbol */
+  st2000_ops.to_create_inferior =   st2000_create_inferior;
+  st2000_ops.to_post_startup_inferior = NULL;
+  st2000_ops.to_acknowledge_created_inferior = NULL;
+  st2000_ops.to_clone_and_follow_inferior = NULL;
+  st2000_ops.to_post_follow_inferior_by_clone = NULL;
+  st2000_run_ops.to_insert_fork_catchpoint = NULL;
+  st2000_run_ops.to_remove_fork_catchpoint = NULL;
+  st2000_run_ops.to_insert_vfork_catchpoint = NULL;
+  st2000_run_ops.to_remove_vfork_catchpoint = NULL;
+  st2000_ops.to_has_forked = NULL;
+  st2000_ops.to_has_vforked = NULL;
+  st2000_run_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  st2000_ops.to_post_follow_vfork = NULL;
+  st2000_run_ops.to_insert_exec_catchpoint = NULL;
+  st2000_run_ops.to_remove_exec_catchpoint = NULL;
+  st2000_run_ops.to_has_execd = NULL;
+  st2000_run_ops.to_reported_exec_events_per_exec_call = NULL;
+  st2000_run_ops.to_has_exited = NULL;
+  st2000_ops.to_mourn_inferior =   st2000_mourn_inferior;
+  st2000_ops.to_can_run  =   0;				/* can_run */
+  st2000_ops.to_notice_signals =   0; 				/* notice_signals */
+  st2000_ops.to_thread_alive  =   0;                            /* thread alive */
+  st2000_ops.to_stop  =   0;				/* to_stop */
+  st2000_ops.to_pid_to_exec_file = NULL;
+  st2000_run_ops.to_core_file_to_sym_file = NULL;
+  st2000_ops.to_stratum =   process_stratum;
+  st2000_ops.DONT_USE =   0;				/* next */
+  st2000_ops.to_has_all_memory =   1;
+  st2000_ops.to_has_memory =   1;
+  st2000_ops.to_has_stack =   1;
+  st2000_ops.to_has_registers =   1;
+  st2000_ops.to_has_execution =   1;				/* all mem, mem, stack, regs, exec */
+  st2000_ops.to_sections =   0;
+  st2000_ops.to_sections_end =   0;				/* Section pointers */
+  st2000_ops.to_magic =   OPS_MAGIC;			/* Always the last thing */
+} ;
+
+void
+_initialize_remote_st2000 ()
+{
+  init_st2000_ops() ;
+  add_target (&st2000_ops);
+  add_com ("st2000 <command>", class_obscure, st2000_command,
+	   "Send a command to the STDBUG monitor.");
+  add_com ("connect", class_obscure, connect_command,
+	   "Connect the terminal directly up to the STDBUG command monitor.\n\
+Use <CR>~. or <CR>~^D to break out.");
+}
diff --git a/gdb/remote-udi.c b/gdb/remote-udi.c
new file mode 100644
index 0000000..6397bca
--- /dev/null
+++ b/gdb/remote-udi.c
@@ -0,0 +1,1694 @@
+/* Remote debugging interface for AMD 29k interfaced via UDI, for GDB.
+   Copyright 1990, 1992, 1995 Free Software Foundation, Inc.
+   Written by Daniel Mann.  Contributed by AMD.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This is like remote.c but uses the Universal Debug Interface (UDI) to 
+   talk to the target hardware (or simulator).  UDI is a TCP/IP based
+   protocol; for hardware that doesn't run TCP, an interface adapter 
+   daemon talks UDI on one side, and talks to the hardware (typically
+   over a serial port) on the other side.
+
+ - Originally written by Daniel Mann at AMD for MiniMON and gdb 3.91.6.
+ - David Wood (wood@lab.ultra.nyu.edu) at New York University adapted this
+	file to gdb 3.95.  I was unable to get this working on sun3os4
+	with termio, only with sgtty.
+ - Daniel Mann at AMD took the 3.95 adaptions above and replaced
+   	MiniMON interface with UDI-p interface.	  */
+ 
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "value.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <errno.h>
+#include "gdb_string.h"
+#include "terminal.h"
+#include "target.h"
+#include "29k-share/udi/udiproc.h"
+#include "gdbcmd.h"
+#include "bfd.h"
+#include "gdbcore.h" /* For download function */
+
+/* access the register store directly, without going through
+   the normal handler functions. This avoids an extra data copy.  */
+
+extern int stop_soon_quietly;           /* for wait_for_inferior */
+extern struct value *call_function_by_hand();
+static void udi_resume PARAMS ((int pid, int step, enum target_signal sig));
+static void udi_fetch_registers PARAMS ((int regno));
+static void udi_load PARAMS ((char *args, int from_tty));
+static void fetch_register PARAMS ((int regno));
+static void udi_store_registers PARAMS ((int regno));
+static int store_register PARAMS ((int regno));
+static int regnum_to_srnum PARAMS ((int regno));
+static void udi_close PARAMS ((int quitting));
+static CPUSpace udi_memory_space PARAMS ((CORE_ADDR addr));
+static int udi_write_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+					      int len));
+static int udi_read_inferior_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+					     int len));
+static void download PARAMS ((char *load_arg_string, int from_tty));
+char   CoffFileName[100] = "";
+
+#define FREEZE_MODE     (read_register(CPS_REGNUM) & 0x400)
+#define USE_SHADOW_PC	((processor_type == a29k_freeze_mode) && FREEZE_MODE)
+
+static int timeout = 5;
+extern struct target_ops udi_ops;             /* Forward declaration */
+
+/* Special register enumeration.
+*/
+
+/******************************************************************* UDI DATA*/
+#define	MAXDATA		2*1024		/* max UDI[read/write] byte size */
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   udi_open knows that we don't have a file open when the program
+   starts.  */
+
+UDISessionId udi_session_id = -1;
+static char *udi_config_id;
+
+CPUOffset IMemStart = 0;
+CPUSizeT IMemSize = 0;
+CPUOffset DMemStart = 0;
+CPUSizeT DMemSize = 0;
+CPUOffset RMemStart = 0;
+CPUSizeT RMemSize = 0;
+UDIUInt32 CPUPRL;
+UDIUInt32 CoProcPRL;
+
+UDIMemoryRange address_ranges[2]; /* Text and data */
+UDIResource entry = {0, 0};	/* Entry point */
+CPUSizeT stack_sizes[2];	/* Regular and memory stacks */
+
+#define	SBUF_MAX	1024	/* maximum size of string handling buffer */
+char sbuf[SBUF_MAX];
+
+typedef	struct 	bkpt_entry_str
+{
+    UDIResource	 Addr;
+    UDIUInt32	 PassCount;
+    UDIBreakType Type;
+    unsigned int BreakId;
+} bkpt_entry_t;
+#define		BKPT_TABLE_SIZE 40
+static bkpt_entry_t	bkpt_table[BKPT_TABLE_SIZE];
+extern	char	dfe_errmsg[];		/* error string */
+
+/* malloc'd name of the program on the remote system.  */
+static char *prog_name = NULL;
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+
+static void
+udi_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  char *args1;
+
+  if (execfile)
+    {
+      if (prog_name != NULL)
+	free (prog_name);
+      prog_name = savestring (execfile, strlen (execfile));
+    }
+  else if (entry.Offset)
+    execfile = "";
+  else
+    error ("No image loaded into target.");
+
+  if (udi_session_id < 0)
+    {
+      /* If the TIP is not open, open it.  */
+      if (UDIConnect (udi_config_id, &udi_session_id))
+	error("UDIConnect() failed: %s\n", dfe_errmsg);
+      /* We will need to download the program.  */
+      entry.Offset = 0;
+    }
+
+  inferior_pid = 40000;
+
+  if (!entry.Offset)
+    download(execfile, 0);
+
+  args1 = alloca (strlen(execfile) + strlen(args) + 2);
+
+  if (execfile[0] == '\0')
+
+    /* It is empty.  We need to quote it somehow, or else the target
+       will think there is no argument being passed here.  According
+       to the UDI spec it is quoted "according to TIP OS rules" which
+       I guess means quoting it like the Unix shell should work
+       (sounds pretty bogus to me...).  In fact it doesn't work (with
+       isstip anyway), but passing in two quotes as the argument seems
+       like a reasonable enough behavior anyway (I guess).  */
+
+    strcpy (args1, "''");
+  else
+    strcpy (args1, execfile);
+  strcat (args1, " ");
+  strcat (args1, args);
+
+  UDIInitializeProcess (address_ranges,		/* ProcessMemory[] */
+			(UDIInt)2,		/* NumberOfRanges */
+			entry,			/* EntryPoint */
+			stack_sizes,		/* *StackSizes */
+			(UDIInt)2,		/* NumberOfStacks */
+			args1);			/* ArgString */
+
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+  proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+static void
+udi_mourn()
+{
+#if 0
+  /* Requiring "target udi" each time you run is a major pain.  I suspect
+     this was just blindy copied from remote.c, in which "target" and
+     "run" are combined.  Having a udi target without an inferior seems
+     to work between "target udi" and "run", so why not now?  */
+  pop_target ();                /* Pop back to no-child state */
+#endif
+  /* But if we're going to want to run it again, we better remove the
+     breakpoints...  */
+  remove_breakpoints ();
+  generic_mourn_inferior ();
+}
+
+/******************************************************************** UDI_OPEN
+** Open a connection to remote TIP.
+   NAME is the socket domain used for communication with the TIP,
+   then a space and the socket name or TIP-host name.
+   '<udi_udi_config_id>' for example.
+ */
+
+/* XXX - need cleanups for udiconnect for various failures!!! */
+
+static void
+udi_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  unsigned int prl;
+  char *p;
+  int cnt;
+  UDIMemoryRange KnownMemory[10];
+  UDIUInt32 ChipVersions[10];
+  UDIInt NumberOfRanges = 10;
+  UDIInt NumberOfChips = 10;
+  UDIPId PId;
+  UDIUInt32 TIPId, TargetId, DFEId, DFE, TIP, DFEIPCId, TIPIPCId;
+
+  target_preopen(from_tty);
+
+  entry.Offset = 0;
+
+  for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
+    bkpt_table[cnt].Type = 0;
+
+  if (udi_config_id)
+    free (udi_config_id);
+
+  if (!name)
+    error("Usage: target udi config_id, where config_id appears in udi_soc file");
+
+  udi_config_id = strdup (strtok (name, " \t"));
+
+  if (UDIConnect (udi_config_id, &udi_session_id))
+    /* FIXME: Should set udi_session_id to -1 here.  */
+    error("UDIConnect() failed: %s\n", dfe_errmsg);
+
+  push_target (&udi_ops);
+
+  /*
+  ** Initialize target configuration structure (global)
+  */
+  if (UDIGetTargetConfig (KnownMemory, &NumberOfRanges,
+			  ChipVersions, &NumberOfChips))
+    error ("UDIGetTargetConfig() failed");
+  if (NumberOfChips > 2)
+    fprintf_unfiltered(gdb_stderr,"Target has more than one processor\n");
+  for (cnt=0; cnt < NumberOfRanges; cnt++)
+    {
+      switch(KnownMemory[cnt].Space)
+	{
+	default:
+	  fprintf_unfiltered(gdb_stderr, "UDIGetTargetConfig() unknown memory space\n");
+	  break;
+	case UDI29KCP_S:
+	  break;
+	case UDI29KIROMSpace:
+	  RMemStart = KnownMemory[cnt].Offset;
+	  RMemSize = KnownMemory[cnt].Size;
+	  break;
+	case UDI29KIRAMSpace:
+	  IMemStart = KnownMemory[cnt].Offset;
+	  IMemSize = KnownMemory[cnt].Size;
+	  break;
+	case UDI29KDRAMSpace:
+	  DMemStart = KnownMemory[cnt].Offset;
+	  DMemSize = KnownMemory[cnt].Size;
+	  break;
+	}
+    }
+
+  a29k_get_processor_type ();
+
+  if (UDICreateProcess (&PId))
+     fprintf_unfiltered(gdb_stderr, "UDICreateProcess() failed\n");
+
+  /* Print out some stuff, letting the user now what's going on */
+  if (UDICapabilities (&TIPId, &TargetId, DFEId, DFE, &TIP, &DFEIPCId,
+		       &TIPIPCId, sbuf))
+    error ("UDICapabilities() failed");
+  if (from_tty)
+    {
+      printf_filtered ("Connected via UDI socket,\n\
+ DFE-IPC version %x.%x.%x  TIP-IPC version %x.%x.%x  TIP version %x.%x.%x\n %s\n",
+		       (DFEIPCId>>8)&0xf, (DFEIPCId>>4)&0xf, DFEIPCId&0xf,
+		       (TIPIPCId>>8)&0xf, (TIPIPCId>>4)&0xf, TIPIPCId&0xf,
+		       (TargetId>>8)&0xf, (TargetId>>4)&0xf, TargetId&0xf,
+		       sbuf);
+    }
+}
+
+/******************************************************************* UDI_CLOSE
+   Close the open connection to the TIP process.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+static void
+udi_close (quitting)	/*FIXME: how is quitting used */
+     int quitting;
+{
+  if (udi_session_id < 0)
+    return;
+
+  /* We should never get here if there isn't something valid in
+     udi_session_id.  */
+
+  if (UDIDisconnect (udi_session_id, UDITerminateSession))
+    {
+      if (quitting)
+	warning ("UDIDisconnect() failed in udi_close");
+      else
+	error ("UDIDisconnect() failed in udi_close");
+    }
+
+  /* Do not try to close udi_session_id again, later in the program.  */
+  udi_session_id = -1;
+  inferior_pid = 0;
+
+  printf_filtered ("  Ending remote debugging\n");
+} 
+
+/**************************************************************** UDI_ATACH */
+/* Attach to a program that is already loaded and running 
+ * Upon exiting the process's execution is stopped.
+ */
+static void
+udi_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  UDIResource	From;
+  UDIInt32	PC_adds;
+  UDICount	Count = 1;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+  UDIError	err;
+
+  if (args == NULL)
+    error_no_arg ("program to attach");
+
+  if (udi_session_id < 0)
+      error ("UDI connection not opened yet, use the 'target udi' command.\n");
+	
+  if (from_tty)
+      printf_unfiltered ("Attaching to remote program %s...\n", prog_name);
+
+  UDIStop();
+  From.Space = UDI29KSpecialRegs;
+  From.Offset = 11;
+  if (err = UDIRead(From, &PC_adds, Count, Size, &CountDone, HostEndian))
+    error ("UDIRead failed in udi_attach");
+  printf_unfiltered ("Remote process is now halted, pc1 = 0x%x.\n", PC_adds);
+}
+/************************************************************* UDI_DETACH */
+/* Terminate the open connection to the TIP process.
+   Use this when you want to detach and do something else
+   with your gdb.  Leave remote process running (with no breakpoints set). */
+static void
+udi_detach (args,from_tty)
+     char *args;
+     int from_tty;
+{
+
+  remove_breakpoints();		/* Just in case there were any left in */
+
+  if (UDIDisconnect (udi_session_id, UDIContinueSession))
+    error ("UDIDisconnect() failed in udi_detach");
+
+  /* Don't try to UDIDisconnect it again in udi_close, which is called from
+     pop_target.  */
+  udi_session_id = -1;
+  inferior_pid = 0;
+
+  pop_target();
+
+  if (from_tty)
+    printf_unfiltered ("Detaching from TIP\n");
+}
+
+
+/****************************************************************** UDI_RESUME
+** Tell the remote machine to resume.  */
+
+static void
+udi_resume (pid, step, sig)
+     int pid, step;
+     enum target_signal sig;
+{
+  UDIError tip_error;
+  UDIUInt32 Steps = 1;
+  UDIStepType StepType = UDIStepNatural;
+  UDIRange Range;
+
+  if (step) 			/* step 1 instruction */
+    {
+      tip_error = UDIStep (Steps, StepType, Range);
+      if (!tip_error)
+	return;
+
+      fprintf_unfiltered (gdb_stderr,  "UDIStep() error = %d\n", tip_error);
+      error ("failed in udi_resume");
+    }
+
+  if (UDIExecute())
+    error ("UDIExecute() failed in udi_resume");
+}
+
+/******************************************************************** UDI_WAIT
+** Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.  */
+
+static int
+udi_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  UDIInt32	MaxTime;
+  UDIPId	PId;
+  UDIInt32	StopReason;
+  UDISizeT	CountDone;
+  int 		old_timeout = timeout;
+  int 		old_immediate_quit = immediate_quit;
+  int		i;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+/* wait for message to arrive. It should be:
+  If the target stops executing, udi_wait() should return.
+*/
+  timeout = 0;			/* Wait indefinetly for a message */
+  immediate_quit = 1;   	/* Helps ability to QUIT */
+
+  while(1)
+    {
+      i = 0;
+      MaxTime = UDIWaitForever;
+      UDIWait(MaxTime, &PId, &StopReason);
+      QUIT;			/* Let user quit if they want */
+
+      switch (StopReason & UDIGrossState)
+	{
+	case UDIStdoutReady:
+	  if (UDIGetStdout (sbuf, (UDISizeT)SBUF_MAX, &CountDone))
+	    /* This is said to happen if the program tries to output
+	       a whole bunch of output (more than SBUF_MAX, I would
+	       guess).  It doesn't seem to happen with the simulator.  */
+	    warning ("UDIGetStdout() failed in udi_wait");
+	  fwrite (sbuf, 1, CountDone, stdout);
+	  gdb_flush(gdb_stdout);
+	  continue;
+
+	case UDIStderrReady:
+	  UDIGetStderr (sbuf, (UDISizeT)SBUF_MAX, &CountDone);
+	  fwrite (sbuf, 1, CountDone, stderr);
+	  gdb_flush(gdb_stderr);
+	  continue;
+
+	case UDIStdinNeeded:
+	  {
+	    int ch;
+	    i = 0;
+	    do
+	      {
+		ch = getchar ();
+		if (ch == EOF)
+		  break;
+		sbuf[i++] = ch;
+	      } while (i < SBUF_MAX && ch != '\n');
+	    UDIPutStdin (sbuf, (UDISizeT)i, &CountDone);
+	    continue;
+	  }
+
+	case UDIRunning:
+	  /* In spite of the fact that we told UDIWait to wait forever, it will
+	     return spuriously sometimes.  */
+	case UDIStdinModeX:
+	  continue;
+	default:
+	  break;
+	}
+      break;
+    }
+
+  switch (StopReason & UDIGrossState)
+    {
+    case UDITrapped:
+      printf_unfiltered("Am290*0 received vector number %d\n", StopReason >> 24);
+	  
+      switch ((StopReason >> 8 ) & 0xff)
+	{
+	case 0:			/* Illegal opcode */
+	  printf_unfiltered("	(break point)\n");
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_TRAP;
+	  break;
+	case 1:			/* Unaligned Access */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_BUS;
+	  break;
+	case 3:
+	case 4:
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_FPE;
+	  break;
+	case 5:			/* Protection Violation */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  /* Why not SEGV?  What is a Protection Violation?  */
+	  status->value.sig = TARGET_SIGNAL_ILL;
+	  break;
+	case 6:
+	case 7:
+	case 8:			/* User Instruction Mapping Miss */
+	case 9:			/* User Data Mapping Miss */
+	case 10:		/* Supervisor Instruction Mapping Miss */
+	case 11:		/* Supervisor Data Mapping Miss */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_SEGV;
+	  break;
+	case 12:
+	case 13:
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_ILL;
+	  break;
+	case 14:		/* Timer */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_ALRM;
+	  break;
+	case 15:		/* Trace */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_TRAP;
+	  break;
+	case 16:		/* INTR0 */
+	case 17:		/* INTR1 */
+	case 18:		/* INTR2 */
+	case 19:		/* INTR3/Internal */
+	case 20:		/* TRAP0 */
+	case 21:		/* TRAP1 */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_INT;
+	  break;
+	case 22:		/* Floating-Point Exception */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  /* Why not FPE?  */
+	  status->value.sig = TARGET_SIGNAL_ILL;
+	  break;
+	case 77:		/* assert 77 */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = TARGET_SIGNAL_TRAP;
+	  break;
+	default:
+	  status->kind = TARGET_WAITKIND_EXITED;
+	  status->value.integer = 0;
+	}
+      break;
+    case UDINotExecuting:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TERM;
+      break;
+    case UDIStopped:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TSTP;
+      break;
+    case UDIWarned:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_URG;
+      break;
+    case UDIStepped:
+    case UDIBreak:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+    case UDIWaiting:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_STOP;
+      break;
+    case UDIHalted:
+      status->kind = TARGET_WAITKIND_STOPPED;
+      status->value.sig = TARGET_SIGNAL_KILL;
+      break;
+    case UDIExited:
+    default:
+      status->kind = TARGET_WAITKIND_EXITED;
+      status->value.integer = 0;
+    }
+
+  timeout = old_timeout;	/* Restore original timeout value */
+  immediate_quit = old_immediate_quit;
+  return inferior_pid;
+}
+
+#if 0
+/* Handy for debugging */
+udi_pc()
+{
+  UDIResource	From;
+  UDIUInt32	*To;
+  UDICount	Count;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+  UDIError	err;
+  int pc[2];
+  unsigned long myregs[256];
+  int i;
+
+  From.Space = UDI29KPC;
+  From.Offset = 0;
+  To = (UDIUInt32 *)pc;
+  Count = 2;
+
+  err = UDIRead(From, To, Count, Size, &CountDone, HostEndian);
+
+  printf_unfiltered ("err = %d, CountDone = %d, pc[0] = 0x%x, pc[1] = 0x%x\n",
+	  err, CountDone, pc[0], pc[1]);
+
+  udi_fetch_registers(-1);
+
+  printf_unfiltered("other pc1 = 0x%x, pc0 = 0x%x\n", *(int *)&registers[4 * PC_REGNUM],
+	  *(int *)&registers[4 * NPC_REGNUM]);
+
+  /* Now, read all the registers globally */
+
+  From.Space = UDI29KGlobalRegs;
+  From.Offset = 0;
+  err = UDIRead(From, myregs, 256, 4, &CountDone, HostEndian);
+
+  printf ("err = %d, CountDone = %d\n", err, CountDone);
+
+  printf("\n");
+
+  for (i = 0; i < 256; i += 2)
+    printf("%d:\t%#10x\t%11d\t%#10x\t%11d\n", i, myregs[i], myregs[i],
+	   myregs[i+1], myregs[i+1]);
+  printf("\n");
+
+  return pc[0];
+}
+#endif
+
+/********************************************************** UDI_FETCH_REGISTERS
+ * Read a remote register 'regno'. 
+ * If regno==-1 then read all the registers.
+ */
+static void 
+udi_fetch_registers (regno)
+int	regno;
+{
+  UDIResource	From;
+  UDIUInt32	*To;
+  UDICount	Count;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+  UDIError	err;
+  int		i;
+
+  if (regno >= 0)  {
+    fetch_register(regno);
+    return;
+  }
+
+/* Gr1/rsp */
+
+  From.Space = UDI29KGlobalRegs;
+  From.Offset = 1;
+  To = (UDIUInt32 *)&registers[4 * GR1_REGNUM];
+  Count = 1;
+  if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  register_valid[GR1_REGNUM] = 1;
+
+#if defined(GR64_REGNUM)	/* Read gr64-127 */
+
+/* Global Registers gr64-gr95 */ 
+
+  From.Space = UDI29KGlobalRegs;
+  From.Offset = 64;
+  To = (UDIUInt32 *)&registers[4 * GR64_REGNUM];
+  Count = 32;
+  if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  for (i = GR64_REGNUM; i < GR64_REGNUM + 32; i++)
+    register_valid[i] = 1;
+
+#endif	/*  GR64_REGNUM */
+
+/* Global Registers gr96-gr127 */ 
+
+  From.Space = UDI29KGlobalRegs;
+  From.Offset = 96;
+  To = (UDIUInt32 *)&registers[4 * GR96_REGNUM];
+  Count = 32;
+  if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  for (i = GR96_REGNUM; i < GR96_REGNUM + 32; i++)
+    register_valid[i] = 1;
+
+/* Local Registers */
+
+  From.Space = UDI29KLocalRegs;
+  From.Offset = 0;
+  To = (UDIUInt32 *)&registers[4 * LR0_REGNUM];
+  Count = 128;
+  if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  for (i = LR0_REGNUM; i < LR0_REGNUM + 128; i++)
+    register_valid[i] = 1;
+
+/* Protected Special Registers */
+
+  From.Space = UDI29KSpecialRegs;
+  From.Offset = 0;
+  To = (UDIUInt32 *)&registers[4 * SR_REGNUM(0)];
+  Count = 15;
+  if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  for (i = SR_REGNUM(0); i < SR_REGNUM(0) + 15; i++)
+    register_valid[i] = 1;
+
+  if (USE_SHADOW_PC) {	/* Let regno_to_srnum() handle the register number */
+    fetch_register(NPC_REGNUM);
+    fetch_register(PC_REGNUM);
+    fetch_register(PC2_REGNUM);
+
+/* Unprotected Special Registers sr128-sr135 */
+
+    From.Space = UDI29KSpecialRegs;
+    From.Offset = 128;
+    To = (UDIUInt32 *)&registers[4 * SR_REGNUM(128)];
+    Count = 135-128 + 1;
+    if (err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+      error("UDIRead() failed in udi_fetch_registers");
+
+    for (i = SR_REGNUM(128); i < SR_REGNUM(128) + 135-128+1; i++)
+      register_valid[i] = 1;
+  }
+
+  if (remote_debug)
+    {
+      printf_unfiltered("Fetching all registers\n");
+      printf_unfiltered("Fetching PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n",
+	     read_register(NPC_REGNUM), read_register(PC_REGNUM),
+	     read_register(PC2_REGNUM));
+    }
+
+  /* There doesn't seem to be any way to get these.  */
+  {
+    int val = -1;
+    supply_register (FPE_REGNUM, (char *) &val);
+    supply_register (INTE_REGNUM, (char *) &val);
+    supply_register (FPS_REGNUM, (char *) &val);
+    supply_register (EXO_REGNUM, (char *) &val);
+  }
+}
+
+
+/********************************************************* UDI_STORE_REGISTERS
+** Store register regno into the target.  
+ * If regno==-1 then store all the registers.
+ */
+
+static void
+udi_store_registers (regno)
+int regno;
+{
+  UDIUInt32	*From;
+  UDIResource	To;
+  UDICount	Count;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+  
+  if (regno >= 0)
+    {
+      store_register(regno);
+      return;
+    }
+
+  if (remote_debug)
+    {
+      printf_unfiltered("Storing all registers\n");
+      printf_unfiltered("PC0 = 0x%x, PC1 = 0x%x, PC2 = 0x%x\n", read_register(NPC_REGNUM),
+	     read_register(PC_REGNUM), read_register(PC2_REGNUM));
+    }
+
+/* Gr1/rsp */
+
+  From = (UDIUInt32 *)&registers[4 * GR1_REGNUM];
+  To.Space = UDI29KGlobalRegs;
+  To.Offset = 1;
+  Count = 1;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+#if defined(GR64_REGNUM)
+
+/* Global registers gr64-gr95 */
+
+  From = (UDIUInt32 *)&registers[4 * GR64_REGNUM];
+  To.Space = UDI29KGlobalRegs;
+  To.Offset = 64;
+  Count = 32;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+#endif	/* GR64_REGNUM */
+
+/* Global registers gr96-gr127 */
+
+  From = (UDIUInt32 *)&registers[4 * GR96_REGNUM];
+  To.Space = UDI29KGlobalRegs;
+  To.Offset = 96;
+  Count = 32;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+/* Local Registers */
+
+  From = (UDIUInt32 *)&registers[4 * LR0_REGNUM];
+  To.Space = UDI29KLocalRegs;
+  To.Offset = 0;
+  Count = 128;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+
+/* Protected Special Registers */ /* VAB through TMR */
+
+  From = (UDIUInt32 *)&registers[4 * SR_REGNUM(0)];
+  To.Space = UDI29KSpecialRegs;
+  To.Offset = 0;
+  Count = 10;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+/* PC0, PC1, PC2 possibly as shadow registers */
+
+  From = (UDIUInt32 *)&registers[4 * SR_REGNUM(10)];
+  To.Space = UDI29KSpecialRegs;
+  Count = 3;
+  if (USE_SHADOW_PC) 
+    To.Offset = 20;				/* SPC0 */
+  else 
+    To.Offset = 10;				/* PC0 */
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+/* PC1 via UDI29KPC */
+
+  From = (UDIUInt32 *)&registers[4 * PC_REGNUM];
+  To.Space = UDI29KPC;
+  To.Offset = 0;				/* PC1 */
+  Count = 1;
+  if (UDIWrite (From, To, Count, Size, &CountDone, HostEndian))
+    error ("UDIWrite() failed in udi_store_regisetrs");
+
+  /* LRU and MMU */
+
+  From = (UDIUInt32 *)&registers[4 * SR_REGNUM(13)];
+  To.Space = UDI29KSpecialRegs;
+  To.Offset = 13;
+  Count = 2;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+/* Unprotected Special Registers */ 
+
+  From = (UDIUInt32 *)&registers[4 * SR_REGNUM(128)];
+  To.Space = UDI29KSpecialRegs;
+  To.Offset = 128;
+  Count = 135-128 +1;
+  if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    error("UDIWrite() failed in udi_store_regisetrs");
+
+  registers_changed ();
+}
+
+/****************************************************** UDI_PREPARE_TO_STORE */
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+udi_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+/********************************************************** TRANSLATE_ADDR */
+static CORE_ADDR
+translate_addr(addr)
+CORE_ADDR addr;
+{
+#if defined(ULTRA3) && defined(KERNEL_DEBUGGING)
+        /* Check for a virtual address in the kernel */
+        /* Assume physical address of ublock is in  paddr_u register */
+	/* FIXME: doesn't work for user virtual addresses */
+        if (addr >= UVADDR) {
+                /* PADDR_U register holds the physical address of the ublock */
+                CORE_ADDR i = (CORE_ADDR)read_register(PADDR_U_REGNUM);
+                return(i + addr - (CORE_ADDR)UVADDR);
+        } else {
+        	return(addr);
+        }
+#else
+        return(addr);
+#endif
+}
+/************************************************* UDI_XFER_INFERIOR_MEMORY */
+/* FIXME!  Merge these two.  */
+static int
+udi_xfer_inferior_memory (memaddr, myaddr, len, write)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+{
+
+  memaddr = translate_addr(memaddr);
+
+  if (write)
+    return udi_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return udi_read_inferior_memory (memaddr, myaddr, len);
+}
+
+/********************************************************** UDI_FILES_INFO */
+static void
+udi_files_info ()
+{
+  printf_unfiltered ("\tAttached to UDI socket to %s", udi_config_id);
+  if (prog_name != NULL)
+    printf_unfiltered ("and running program %s", prog_name);
+  printf_unfiltered (".\n");
+}
+
+/**************************************************** UDI_INSERT_BREAKPOINT */
+static int
+udi_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int cnt;
+  UDIError err;
+
+  for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
+    if (bkpt_table[cnt].Type == 0) /* Find first free slot */
+      break;
+
+  if(cnt >= BKPT_TABLE_SIZE)
+    error("Too many breakpoints set");
+
+  bkpt_table[cnt].Addr.Offset = addr;
+  bkpt_table[cnt].Addr.Space  = UDI29KIRAMSpace;
+  bkpt_table[cnt].PassCount = 1;
+  bkpt_table[cnt].Type = UDIBreakFlagExecute;
+  
+  err = UDISetBreakpoint(bkpt_table[cnt].Addr,
+			 bkpt_table[cnt].PassCount,
+			 bkpt_table[cnt].Type,
+			 &bkpt_table[cnt].BreakId);
+
+  if (err == 0) return 0;		/* Success */
+
+  bkpt_table[cnt].Type = 0;
+  error("UDISetBreakpoint returned error code %d\n", err);
+}
+
+/**************************************************** UDI_REMOVE_BREAKPOINT */
+static int
+udi_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int cnt;
+  UDIError err;
+
+  for (cnt = 0; cnt < BKPT_TABLE_SIZE; cnt++)
+    if (bkpt_table[cnt].Addr.Offset == addr) /* Find matching breakpoint */
+      break;
+
+  if(cnt >= BKPT_TABLE_SIZE)
+    error("Can't find breakpoint in table");
+
+  bkpt_table[cnt].Type = 0;
+
+  err = UDIClearBreakpoint(bkpt_table[cnt].BreakId);
+  if (err == 0) return 0;	/* Success */
+
+  error("UDIClearBreakpoint returned error code %d\n", err);
+}
+
+static void
+udi_kill(arg,from_tty)
+     char *arg;
+     int from_tty;
+{
+
+#if 0
+/*
+UDIStop does not really work as advertised.  It causes the TIP to close it's
+connection, which usually results in GDB dying with a SIGPIPE.  For now, we
+just invoke udi_close, which seems to get things right.
+*/
+  UDIStop();
+
+  udi_session_id = -1;
+  inferior_pid = 0;
+
+  if (from_tty)
+    printf_unfiltered("Target has been stopped.");
+#endif /* 0 */
+#if 0
+  udi_close(0);
+  pop_target();
+#endif /* 0 */
+
+  /* Keep the target around, e.g. so "run" can do the right thing when
+     we are already debugging something.  */
+
+  if (UDIDisconnect (udi_session_id, UDITerminateSession))
+    {
+      warning ("UDIDisconnect() failed");
+    }
+
+  /* Do not try to close udi_session_id again, later in the program.  */
+  udi_session_id = -1;
+  inferior_pid = 0;
+}
+
+/* 
+   Load a program into the target.  Args are: `program {options}'.  The options
+   are used to control loading of the program, and are NOT passed onto the
+   loaded code as arguments.  (You need to use the `run' command to do that.)
+
+   The options are:
+ 		-ms %d	Set mem stack size to %d
+		-rs %d	Set regular stack size to %d
+		-i	send init info (default)
+		-noi	don't send init info
+		-[tT]  	Load Text section
+		-[dD]	Load Data section
+		-[bB]	Load BSS section
+		-[lL]	Load Lit section
+  */
+
+static void
+download(load_arg_string, from_tty)
+     char *load_arg_string;
+     int from_tty;
+{
+#define DEFAULT_MEM_STACK_SIZE 		0x6000
+#define DEFAULT_REG_STACK_SIZE 		0x2000
+
+  char *token;
+  char *filename;
+  asection *section;
+  bfd *pbfd;
+  UDIError err;
+  int load_text = 1, load_data = 1, load_bss = 1, load_lit = 1;
+
+  address_ranges[0].Space = UDI29KIRAMSpace;
+  address_ranges[0].Offset = 0xffffffff;
+  address_ranges[0].Size = 0;
+
+  address_ranges[1].Space = UDI29KDRAMSpace;
+  address_ranges[1].Offset = 0xffffffff;
+  address_ranges[1].Size = 0;
+
+  stack_sizes[0] = DEFAULT_REG_STACK_SIZE;
+  stack_sizes[1] = DEFAULT_MEM_STACK_SIZE;
+
+  dont_repeat ();
+
+  filename = strtok(load_arg_string, " \t");
+  if (!filename)
+    error ("Must specify at least a file name with the load command");
+
+  filename = tilde_expand (filename);
+  make_cleanup ((make_cleanup_func) free, filename);
+
+  while (token = strtok (NULL, " \t"))
+    {
+      if (token[0] == '-')
+	{
+	  token++;
+
+	  if (STREQ (token, "ms"))
+	    stack_sizes[1] = atol (strtok (NULL, " \t"));
+	  else if (STREQ (token, "rs"))
+	    stack_sizes[0] = atol (strtok (NULL, " \t"));
+	  else
+	    {
+	      load_text = load_data = load_bss = load_lit = 0;
+
+	      while (*token)
+		{
+		  switch (*token++)
+		    {
+		    case 't':
+		    case 'T':
+		      load_text = 1;
+		      break;
+		    case 'd':
+		    case 'D':
+		      load_data = 1;
+		      break;
+		    case 'b':
+		    case 'B':
+		      load_bss = 1;
+		      break;
+		    case 'l':
+		    case 'L':
+		      load_lit = 1;
+		      break;
+		    default:
+		      error ("Unknown UDI load option -%s", token-1);
+		    }
+		}
+	    }
+	}
+    }
+
+  pbfd = bfd_openr (filename, gnutarget);
+
+  if (!pbfd) 
+    /* FIXME: should be using bfd_errmsg, not assuming it was
+       bfd_error_system_call.  */
+    perror_with_name (filename);
+  
+  /* FIXME: should be checking for errors from bfd_close (for one thing,
+     on error it does not free all the storage associated with the
+     bfd).  */
+  make_cleanup ((make_cleanup_func) bfd_close, pbfd);
+
+  QUIT;
+  immediate_quit++;
+
+  if (!bfd_check_format (pbfd, bfd_object)) 
+    error ("It doesn't seem to be an object file");
+  
+  for (section = pbfd->sections; section; section = section->next) 
+    {
+      if (bfd_get_section_flags (pbfd, section) & SEC_ALLOC)
+	{
+	  UDIResource To;
+	  UDICount Count;
+	  unsigned long section_size, section_end;
+	  const char *section_name;
+
+	  section_name = bfd_get_section_name (pbfd, section);
+	  if (STREQ (section_name, ".text") && !load_text)
+	    continue;
+	  else if (STREQ (section_name, ".data") && !load_data)
+	    continue;
+	  else if (STREQ (section_name, ".bss") && !load_bss)
+	    continue;
+	  else if (STREQ (section_name, ".lit") && !load_lit)
+	    continue;
+
+	  To.Offset = bfd_get_section_vma (pbfd, section);
+	  section_size = bfd_section_size (pbfd, section);
+	  section_end = To.Offset + section_size;
+
+	  if (section_size == 0)
+	    /* This is needed at least in the BSS case, where the code
+	       below starts writing before it even checks the size.  */
+	    continue;
+
+	  printf_unfiltered("[Loading section %s at %x (%d bytes)]\n",
+		 section_name,
+		 To.Offset,
+		 section_size);
+
+	  if (bfd_get_section_flags (pbfd, section) & SEC_CODE)
+	    {
+	      To.Space = UDI29KIRAMSpace;
+
+	      address_ranges[0].Offset = min (address_ranges[0].Offset,
+					      To.Offset);
+	      address_ranges[0].Size = max (address_ranges[0].Size,
+					    section_end
+					    - address_ranges[0].Offset);
+	    }
+	  else
+	    {
+	      To.Space = UDI29KDRAMSpace;
+
+	      address_ranges[1].Offset = min (address_ranges[1].Offset,
+					      To.Offset);
+	      address_ranges[1].Size = max (address_ranges[1].Size,
+					    section_end
+					    - address_ranges[1].Offset);
+	    }
+
+	  if (bfd_get_section_flags (pbfd, section) & SEC_LOAD) /* Text, data or lit */
+	    {
+	      file_ptr fptr;
+
+	      fptr = 0;
+
+	      while (section_size > 0)
+		{
+		  char buffer[1024];
+
+		  Count = min (section_size, 1024);
+
+		  bfd_get_section_contents (pbfd, section, buffer, fptr,
+					    Count);
+
+		  err = UDIWrite ((UDIHostMemPtr)buffer, /* From */
+				  To,			/* To */
+				  Count,		/* Count */
+				  (UDISizeT)1,		/* Size */
+				  &Count,		/* CountDone */
+				  (UDIBool)0);		/* HostEndian */
+		  if (err)
+		    error ("UDIWrite failed, error = %d", err);
+
+		  To.Offset += Count;
+		  fptr += Count;
+		  section_size -= Count;
+		}
+	    }
+	  else			/* BSS */
+	    {
+	      UDIResource From;
+	      unsigned long zero = 0;
+
+	      /* Write a zero byte at the vma */
+	      /* FIXME: Broken for sections of 1-3 bytes (we test for
+		 zero above).  */
+	      err = UDIWrite ((UDIHostMemPtr)&zero,	/* From */
+			      To,			/* To */
+			      (UDICount)1,		/* Count */
+			      (UDISizeT)4,		/* Size */
+			      &Count,			/* CountDone */
+			      (UDIBool)0);		/* HostEndian */
+	      if (err)
+		error ("UDIWrite failed, error = %d", err);
+
+	      From = To;
+	      To.Offset+=4;
+
+	      /* Now, duplicate it for the length of the BSS */
+	      err = UDICopy (From,			/* From */
+			     To,			/* To */
+			     (UDICount)(section_size/4 - 1), /* Count */
+			     (UDISizeT)4,		/* Size */
+			     &Count,			/* CountDone */
+			     (UDIBool)1);		/* Direction */
+	      if (err)
+		{
+		  char message[100];
+		  int xerr;
+
+		  xerr = UDIGetErrorMsg(err, 100, message, &Count);
+		  if (!xerr)
+		    fprintf_unfiltered (gdb_stderr, "Error is %s\n", message);
+		  else
+		    fprintf_unfiltered (gdb_stderr, "xerr is %d\n", xerr);
+		  error ("UDICopy failed, error = %d", err);
+		}
+	    }
+
+	}
+    }
+
+  entry.Space = UDI29KIRAMSpace;
+  entry.Offset = bfd_get_start_address (pbfd);
+  
+  immediate_quit--;
+}
+
+/* Function to download an image into the remote target.  */
+
+static void
+udi_load (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  download (args, from_tty);
+
+  /* As a convenience, pick up any symbol info that is in the program
+     being loaded.  Note that we assume that the program is the``mainline'';
+     if this is not always true, then this code will need to be augmented.  */
+  symbol_file_add (strtok (args, " \t"), from_tty, 0, 1, 0, 0, 0, 0);
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  reinit_frame_cache ();
+}
+
+/*************************************************** UDI_WRITE_INFERIOR_MEMORY
+** Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns number of bytes written.  */
+static int
+udi_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int		nwritten = 0;
+  UDIUInt32	*From;
+  UDIResource	To;
+  UDICount	Count;
+  UDISizeT	Size = 1;
+  UDICount	CountDone = 0;
+  UDIBool	HostEndian = 0;
+  
+  To.Space = udi_memory_space(memaddr);
+  From = (UDIUInt32*)myaddr;
+
+  while (nwritten < len)
+  {	Count = len - nwritten;
+	if (Count > MAXDATA) Count = MAXDATA;
+  	To.Offset = memaddr + nwritten;
+        if(UDIWrite(From, To, Count, Size, &CountDone, HostEndian))
+    	{  error("UDIWrite() failed in udi_write_inferior_memory");
+	   break;	
+	}
+	else
+  	{  nwritten += CountDone;
+	   From += CountDone;
+	}
+  }
+  return(nwritten);
+}
+
+/**************************************************** UDI_READ_INFERIOR_MEMORY
+** Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns number of bytes read.  */
+static int
+udi_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int		nread = 0;
+  UDIResource	From;
+  UDIUInt32	*To;
+  UDICount	Count;
+  UDISizeT	Size = 1;
+  UDICount	CountDone = 0;
+  UDIBool	HostEndian = 0;
+  UDIError	err;
+  
+  From.Space = udi_memory_space(memaddr);	
+  To = (UDIUInt32*)myaddr;
+
+  while (nread < len)
+  {	Count = len - nread;
+	if (Count > MAXDATA) Count = MAXDATA;
+  	From.Offset = memaddr + nread;
+        if(err = UDIRead(From, To, Count, Size, &CountDone, HostEndian))
+    	{  error("UDIRead() failed in udi_read_inferior_memory");
+	   break;	
+	}
+	else
+  	{  nread += CountDone;
+	   To += CountDone;
+	}
+  }
+  return(nread);
+}
+
+/********************************************************************* WARNING
+*/
+udi_warning(num)
+int	num;
+{
+    error ("ERROR while loading program into remote TIP: $d\n", num);
+}
+
+
+/*****************************************************************************/ 
+/* Fetch a single register indicatated by 'regno'. 
+ * Returns 0/-1 on success/failure.  
+ */
+static void
+fetch_register (regno)
+     int regno;
+{
+  UDIResource	From;
+  UDIUInt32	To;
+  UDICount	Count = 1;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+  UDIError	err;
+  int  		result;
+
+  if (regno == GR1_REGNUM)
+    {
+      From.Space = UDI29KGlobalRegs;
+      From.Offset = 1;
+    }
+  else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
+    {
+      From.Space = UDI29KGlobalRegs;
+      From.Offset = (regno - GR96_REGNUM) + 96;;
+    }
+
+#if defined(GR64_REGNUM)
+
+  else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
+    {
+      From.Space = UDI29KGlobalRegs;
+      From.Offset = (regno - GR64_REGNUM) + 64;
+    }
+
+#endif	/* GR64_REGNUM */
+
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+    {
+      From.Space = UDI29KLocalRegs;
+      From.Offset = (regno - LR0_REGNUM);
+    }
+  else if (regno>=FPE_REGNUM && regno<=EXO_REGNUM)  
+    {
+      int val = -1;
+      /*supply_register(160 + (regno - FPE_REGNUM),(char *) &val);*/
+      supply_register(regno, (char *) &val);
+      return;		/* Pretend Success */
+    }
+  else 
+    {
+      From.Space = UDI29KSpecialRegs;
+      From.Offset = regnum_to_srnum(regno); 
+    }
+
+  if (err = UDIRead(From, &To, Count, Size, &CountDone, HostEndian))
+    error("UDIRead() failed in udi_fetch_registers");
+
+  supply_register(regno, (char *) &To);
+
+  if (remote_debug)
+    printf_unfiltered("Fetching register %s = 0x%x\n", REGISTER_NAME (regno), To);
+}
+/*****************************************************************************/ 
+/* Store a single register indicated by 'regno'. 
+ * Returns 0/-1 on success/failure.  
+ */
+static int
+store_register (regno)
+     int regno;
+{
+  int  		result;
+  UDIUInt32	From;
+  UDIResource	To;
+  UDICount	Count = 1;
+  UDISizeT	Size = 4;
+  UDICount	CountDone;
+  UDIBool	HostEndian = 0;
+
+  From =  read_register (regno);	/* get data value */
+
+  if (remote_debug)
+    printf_unfiltered("Storing register %s = 0x%x\n", REGISTER_NAME (regno), From);
+
+  if (regno == GR1_REGNUM)
+    {
+      To.Space = UDI29KGlobalRegs;
+      To.Offset = 1;
+      result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
+      /* Setting GR1 changes the numbers of all the locals, so invalidate the 
+       * register cache.  Do this *after* calling read_register, because we want 
+       * read_register to return the value that write_register has just stuffed 
+       * into the registers array, not the value of the register fetched from 
+       * the inferior.  
+       */
+      registers_changed ();
+    }
+#if defined(GR64_REGNUM)
+  else if (regno >= GR64_REGNUM && regno < GR64_REGNUM + 32 )
+    {
+      To.Space = UDI29KGlobalRegs;
+      To.Offset = (regno - GR64_REGNUM) + 64;
+      result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
+    }
+#endif	/* GR64_REGNUM */
+  else if (regno >= GR96_REGNUM && regno < GR96_REGNUM + 32)
+    {
+      To.Space = UDI29KGlobalRegs;
+      To.Offset = (regno - GR96_REGNUM) + 96;
+      result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
+    }
+  else if (regno >= LR0_REGNUM && regno < LR0_REGNUM + 128)
+    {
+      To.Space = UDI29KLocalRegs;
+      To.Offset = (regno - LR0_REGNUM);
+      result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
+    }
+  else if (regno >= FPE_REGNUM && regno <= EXO_REGNUM)  
+    return 0;		/* Pretend Success */
+  else if (regno == PC_REGNUM)
+    {    
+      /* PC1 via UDI29KPC */
+
+      To.Space = UDI29KPC;
+      To.Offset = 0;		/* PC1 */
+      result = UDIWrite (&From, To, Count, Size, &CountDone, HostEndian);
+
+      /* Writing to this loc actually changes the values of pc0 & pc1 */
+
+      register_valid[PC_REGNUM] = 0; /* pc1 */
+      register_valid[NPC_REGNUM] = 0; /* pc0 */
+    }
+  else 	/* An unprotected or protected special register */
+    {
+      To.Space = UDI29KSpecialRegs;
+      To.Offset = regnum_to_srnum(regno); 
+      result = UDIWrite(&From, To, Count, Size, &CountDone, HostEndian);
+    }
+
+  if (result != 0)
+    error("UDIWrite() failed in store_registers");
+
+  return 0;
+}
+/********************************************************** REGNUM_TO_SRNUM */
+/* 
+ * Convert a gdb special register number to a 29000 special register number.
+ */
+static int
+regnum_to_srnum(regno)
+int	regno;
+{
+	switch(regno) {
+		case VAB_REGNUM: return(0); 
+		case OPS_REGNUM: return(1); 
+		case CPS_REGNUM: return(2); 
+		case CFG_REGNUM: return(3); 
+		case CHA_REGNUM: return(4); 
+		case CHD_REGNUM: return(5); 
+		case CHC_REGNUM: return(6); 
+		case RBP_REGNUM: return(7); 
+		case TMC_REGNUM: return(8); 
+		case TMR_REGNUM: return(9); 
+		case NPC_REGNUM: return(USE_SHADOW_PC ? (20) : (10));
+		case PC_REGNUM:  return(USE_SHADOW_PC ? (21) : (11));
+		case PC2_REGNUM: return(USE_SHADOW_PC ? (22) : (12));
+		case MMU_REGNUM: return(13); 
+		case LRU_REGNUM: return(14); 
+		case IPC_REGNUM: return(128); 
+		case IPA_REGNUM: return(129); 
+		case IPB_REGNUM: return(130); 
+		case Q_REGNUM:   return(131); 
+		case ALU_REGNUM: return(132); 
+		case BP_REGNUM:  return(133); 
+		case FC_REGNUM:  return(134); 
+		case CR_REGNUM:  return(135); 
+		case FPE_REGNUM: return(160); 
+		case INTE_REGNUM: return(161); 
+		case FPS_REGNUM: return(162); 
+		case EXO_REGNUM:return(164); 
+		default:
+			return(255);	/* Failure ? */
+	}
+}
+/****************************************************************************/
+/*
+ * Determine the Target memory space qualifier based on the addr. 
+ * FIXME: Can't distinguis I_ROM/D_ROM.  
+ * FIXME: Doesn't know anything about I_CACHE/D_CACHE.
+ */
+static CPUSpace
+udi_memory_space(addr)
+CORE_ADDR	addr;
+{
+	UDIUInt32 tstart = IMemStart;
+	UDIUInt32 tend   = tstart + IMemSize;  
+	UDIUInt32 dstart = DMemStart;
+	UDIUInt32 dend   = tstart + DMemSize;  
+	UDIUInt32 rstart = RMemStart;
+	UDIUInt32 rend   = tstart + RMemSize;  
+
+	if (((UDIUInt32)addr >= tstart) && ((UDIUInt32)addr < tend)) { 
+		return UDI29KIRAMSpace;
+	} else if (((UDIUInt32)addr >= dstart) && ((UDIUInt32)addr < dend)) { 
+		return UDI29KDRAMSpace;
+	} else if (((UDIUInt32)addr >= rstart) && ((UDIUInt32)addr < rend)) {
+		/* FIXME: how do we determine between D_ROM and I_ROM */
+		return UDI29KIROMSpace;
+	} else	/* FIXME: what do me do now? */
+		return UDI29KDRAMSpace;	/* Hmmm! */
+}
+/*********************************************************************** STUBS
+*/
+
+void  convert16() {;}
+void  convert32() {;}
+GDB_FILE * EchoFile = 0;		/* used for debugging */
+int   QuietMode = 0;		/* used for debugging */
+
+#ifdef NO_HIF_SUPPORT
+service_HIF(msg)
+     union msg_t *msg;
+{
+  return(0);			/* Emulate a failure */
+}
+#endif
+
+/* Target_ops vector.  Not static because there does not seem to be
+   any portable way to do a forward declaration of a static variable.
+   The RS/6000 doesn't like "extern" followed by "static"; SunOS
+   /bin/cc doesn't like "static" twice.  */
+
+struct target_ops udi_ops;
+
+static void 
+init_udi_ops(void)
+{
+  udi_ops.to_shortname =         "udi";
+  udi_ops.to_longname = 	"Remote UDI connected TIP";
+  udi_ops.to_doc = 	"Remote debug an AMD 29k using UDI socket connection to TIP process.\n\
+Arguments are\n\
+`configuration-id AF_INET hostname port-number'\n\
+To connect via the network, where hostname and port-number specify the\n\
+host and port where you can connect via UDI.\n\
+configuration-id is unused.\n\
+\n\
+`configuration-id AF_UNIX socket-name tip-program'\n\
+To connect using a local connection to the \"tip.exe\" program which is\n\
+    supplied by AMD.  If socket-name specifies an AF_UNIX socket then the\n\
+    tip program must already be started; connect to it using that socket.\n\
+    If not, start up tip-program, which should be the name of the tip\n\
+    program.  If appropriate, the PATH environment variable is searched.\n\
+    configuration-id is unused.\n\
+\n\
+`configuration-id'\n\
+    Look up the configuration in ./udi_soc or /etc/udi_soc, which\n\
+    are files containing lines in the above formats.  configuration-id is\n\
+    used to pick which line of the file to use." ;
+  udi_ops.to_open =         udi_open;
+  udi_ops.to_close = 	udi_close;
+  udi_ops.to_attach =         udi_attach;
+  udi_ops.to_detach = 	udi_detach;
+  udi_ops.to_resume = 	udi_resume;
+  udi_ops.to_wait  = 	udi_wait;
+  udi_ops.to_fetch_registers  =         udi_fetch_registers;
+  udi_ops.to_store_registers  = 	udi_store_registers;
+  udi_ops.to_prepare_to_store =         udi_prepare_to_store;
+  udi_ops.to_xfer_memory  =         udi_xfer_inferior_memory;
+  udi_ops.to_files_info  =         udi_files_info;
+  udi_ops.to_insert_breakpoint =         udi_insert_breakpoint;
+  udi_ops.to_remove_breakpoint = 	udi_remove_breakpoint;
+  udi_ops.to_terminal_init  =         0;		
+  udi_ops.to_terminal_inferior = 	0;		
+  udi_ops.to_terminal_ours_for_output = 	0;
+  udi_ops.to_terminal_ours  = 	0;	
+  udi_ops.to_terminal_info  = 	0;	
+  udi_ops.to_kill  =         udi_kill;  
+  udi_ops.to_load  =         udi_load;	
+  udi_ops.to_lookup_symbol =         0; 
+  udi_ops.to_create_inferior =         udi_create_inferior;
+  udi_ops.to_mourn_inferior =         udi_mourn;
+  udi_ops.to_can_run  = 	0;	
+  udi_ops.to_notice_signals = 	0;	
+  udi_ops.to_thread_alive  = 	0;	
+  udi_ops.to_stop  =         0;
+  udi_ops.to_stratum =         process_stratum;
+  udi_ops.DONT_USE = 	0;		
+  udi_ops.to_has_all_memory =         1;
+  udi_ops.to_has_memory = 	1;	
+  udi_ops.to_has_stack = 	1;	
+  udi_ops.to_has_registers = 	1;	
+  udi_ops.to_has_execution = 	1;	
+  udi_ops.to_sections = 	0;	
+  udi_ops.to_sections_end = 	0;	
+  udi_ops.to_magic = 	OPS_MAGIC;
+};
+
+void
+_initialize_remote_udi ()
+{
+  init_udi_ops() ;
+  add_target (&udi_ops);
+}
diff --git a/gdb/remote-utils.c b/gdb/remote-utils.c
new file mode 100644
index 0000000..7219255
--- /dev/null
+++ b/gdb/remote-utils.c
@@ -0,0 +1,654 @@
+/* Generic support for remote debugging interfaces.
+
+   Copyright 1993, 1994, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*  This file actually contains two distinct logical "packages".  They
+    are packaged together in this one file because they are typically
+    used together.
+
+    The first package is an addition to the serial package.  The
+    addition provides reading and writing with debugging output and
+    timeouts based on user settable variables.  These routines are
+    intended to support serial port based remote backends.  These
+    functions are prefixed with sr_.
+
+    The second package is a collection of more or less generic
+    functions for use by remote backends.  They support user settable
+    variables for debugging, retries, and the like.  
+
+   Todo:
+
+   * a pass through mode a la kermit or telnet.
+   * autobaud.
+   * ask remote to change his baud rate.
+   */
+
+#include <ctype.h>
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "serial.h"
+#include "gdbcore.h" /* for exec_bfd */
+#include "inferior.h" /* for generic_mourn_inferior */
+#include "remote-utils.h"
+
+
+void _initialize_sr_support PARAMS ((void));
+
+struct _sr_settings sr_settings = {
+  4, /* timeout:
+	remote-hms.c had 2
+	remote-bug.c had "with a timeout of 2, we time out waiting for
+	the prompt after an s-record dump."
+
+	remote.c had (2): This was 5 seconds, which is a long time to
+	sit and wait. Unless this is going though some terminal server
+	or multiplexer or other form of hairy serial connection, I
+	would think 2 seconds would be plenty.
+*/
+
+  10, /* retries */
+  NULL,	/* device */
+  NULL,	/* descriptor */
+};
+
+struct gr_settings *gr_settings = NULL;
+
+static void usage PARAMS ((char *, char *));
+static void sr_com PARAMS ((char *, int));
+
+static void
+usage(proto, junk)
+     char *proto;
+     char *junk;
+{
+  if (junk != NULL)
+    fprintf_unfiltered(gdb_stderr, "Unrecognized arguments: `%s'.\n", junk);
+
+  error ("Usage: target %s [DEVICE [SPEED [DEBUG]]]\n\
+where DEVICE is the name of a device or HOST:PORT", proto, proto);
+
+  return;
+}
+
+#define CHECKDONE(p, q) \
+{ \
+  if (q == p) \
+    { \
+      if (*p == '\0') \
+	return; \
+      else \
+	usage(proto, p); \
+    } \
+}
+
+void
+sr_scan_args(proto, args)
+     char *proto;
+     char *args;
+{
+  int n;
+  char *p, *q;
+
+  /* if no args, then nothing to do. */
+  if (args == NULL || *args == '\0')
+    return;
+
+  /* scan off white space.  */
+  for (p = args; isspace(*p); ++p) ;;
+
+  /* find end of device name.  */
+  for (q = p; *q != '\0' && !isspace(*q); ++q) ;;
+
+  /* check for missing or empty device name.  */
+  CHECKDONE(p, q);
+  sr_set_device(savestring(p, q - p));
+
+  /* look for baud rate.  */
+  n = strtol(q, &p, 10);
+
+  /* check for missing or empty baud rate.  */
+  CHECKDONE(p, q);
+  baud_rate = n;
+
+  /* look for debug value.  */
+  n = strtol(p, &q, 10);
+
+  /* check for missing or empty debug value.  */
+  CHECKDONE(p, q);
+  sr_set_debug(n);
+
+  /* scan off remaining white space.  */
+  for (p = q; isspace(*p); ++p) ;;
+
+  /* if not end of string, then there's unrecognized junk. */
+  if (*p != '\0')
+    usage(proto, p);
+
+  return;
+}
+
+void
+gr_generic_checkin()
+{
+  sr_write_cr("");
+  gr_expect_prompt();
+}
+
+void
+gr_open(args, from_tty, gr)
+     char *args;
+     int from_tty;
+     struct gr_settings *gr;
+{
+  target_preopen(from_tty);
+  sr_scan_args(gr->ops->to_shortname, args);
+  unpush_target(gr->ops);
+
+  gr_settings = gr;
+
+  gr_set_dcache(dcache_init(gr->readfunc, gr->writefunc));
+
+  if (sr_get_desc() != NULL)
+    gr_close (0);
+
+  /* If no args are specified, then we use the device specified by a
+     previous command or "set remotedevice".  But if there is no
+     device, better stop now, not dump core.  */
+
+  if (sr_get_device () == NULL)
+    usage (gr->ops->to_shortname, NULL);
+
+  sr_set_desc(SERIAL_OPEN (sr_get_device()));
+  if (!sr_get_desc())
+    perror_with_name((char *) sr_get_device());
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE(sr_get_desc(), baud_rate) != 0)
+	{
+	  SERIAL_CLOSE(sr_get_desc());
+	  perror_with_name(sr_get_device());
+	}
+    }
+
+  SERIAL_RAW (sr_get_desc());
+
+  /* If there is something sitting in the buffer we might take it as a
+     response to a command, which would be bad.  */
+  SERIAL_FLUSH_INPUT (sr_get_desc ());
+
+  /* default retries */
+  if (sr_get_retries() == 0)
+    sr_set_retries(1);
+
+  /* default clear breakpoint function */
+  if (gr_settings->clear_all_breakpoints == NULL)
+    gr_settings->clear_all_breakpoints = remove_breakpoints;
+
+  if (from_tty)
+    {
+      printf_filtered ("Remote debugging using `%s'", sr_get_device ());
+      if (baud_rate != -1)
+	printf_filtered (" at baud rate of %d",
+			 baud_rate);
+      printf_filtered ("\n");
+    }
+
+  push_target(gr->ops);
+  gr_checkin();
+  gr_clear_all_breakpoints ();
+  return;
+}
+
+/* Read a character from the remote system masking it down to 7 bits
+   and doing all the fancy timeout stuff.  */
+
+int
+sr_readchar ()
+{
+  int buf;
+
+  buf = SERIAL_READCHAR (sr_get_desc(), sr_get_timeout());
+
+  if (buf == SERIAL_TIMEOUT)
+    error ("Timeout reading from remote system.");
+
+  if (sr_get_debug() > 0)
+    printf_unfiltered ("%c", buf);
+
+  return buf & 0x7f;
+}
+
+int
+sr_pollchar()
+{
+  int buf;
+
+  buf = SERIAL_READCHAR (sr_get_desc(), 0);
+  if (buf == SERIAL_TIMEOUT)
+    buf = 0;
+  if (sr_get_debug() > 0)
+    {
+      if (buf)
+        printf_unfiltered ("%c", buf);
+      else
+        printf_unfiltered ("<empty character poll>");
+    }
+
+  return buf & 0x7f;
+}
+
+/* Keep discarding input from the remote system, until STRING is found.
+   Let the user break out immediately.  */
+void
+sr_expect (string)
+     char *string;
+{
+  char *p = string;
+
+  immediate_quit = 1;
+  while (1)
+    {
+      if (sr_readchar () == *p)
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      return;
+	    }
+	}
+      else
+	p = string;
+    }
+}
+
+void
+sr_write (a, l)
+     char *a;
+     int l;
+{
+  int i;
+
+  if (SERIAL_WRITE (sr_get_desc(), a, l) != 0)
+    perror_with_name ("sr_write: Error writing to remote");
+
+  if (sr_get_debug() > 0)
+    for (i = 0; i < l; i++)
+      printf_unfiltered ("%c", a[i]);
+
+  return;
+}
+
+void
+sr_write_cr (s)
+     char *s;
+{
+  sr_write (s, strlen (s));
+  sr_write ("\r", 1);
+  return;
+}
+
+int
+sr_timed_read (buf, n)
+     char *buf;
+     int n;
+{
+  int i;
+  char c;
+
+  i = 0;
+  while (i < n)
+    {
+      c = sr_readchar ();
+
+      if (c == 0)
+	return i;
+      buf[i] = c;
+      i++;
+
+    }
+  return i;
+}
+
+/* Get a hex digit from the remote system & return its value. If
+   ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+
+int
+sr_get_hex_digit (ignore_space)
+     int ignore_space;
+{
+  int ch;
+
+  while (1)
+    {
+      ch = sr_readchar ();
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch != ' ' || !ignore_space)
+	{
+	  gr_expect_prompt ();
+	  error ("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from the remote and put it in *BYT.  Accept any number
+   leading spaces.  */
+void
+sr_get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = sr_get_hex_digit (1) << 4;
+  val |= sr_get_hex_digit (0);
+  *byt = val;
+}
+
+/* Read a 32-bit hex word from the remote, preceded by a space  */
+long
+sr_get_hex_word ()
+{
+  long val;
+  int j;
+
+  val = 0;
+  for (j = 0; j < 8; j++)
+    val = (val << 4) + sr_get_hex_digit (j == 0);
+  return val;
+}
+
+/* Put a command string, in args, out to the remote.  The remote is assumed to
+   be in raw mode, all writing/reading done through desc.
+   Ouput from the remote is placed on the users terminal until the
+   prompt from the remote is seen.
+   FIXME: Can't handle commands that take input.  */
+
+static void
+sr_com (args, fromtty)
+     char *args;
+     int fromtty;
+{
+  sr_check_open ();
+
+  if (!args)
+    return;
+
+  /* Clear all input so only command relative output is displayed */
+
+  sr_write_cr (args);
+  sr_write ("\030", 1);
+  registers_changed ();
+  gr_expect_prompt ();
+}
+
+void
+gr_close(quitting)
+     int quitting;
+{
+  gr_clear_all_breakpoints();
+
+  if (sr_is_open())
+    {
+      SERIAL_CLOSE (sr_get_desc());
+      sr_set_desc(NULL);
+    }
+
+  return;
+}
+
+/* gr_detach()
+   takes a program previously attached to and detaches it.
+   We better not have left any breakpoints
+   in the program or it'll die when it hits one.
+   Close the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+
+void
+gr_detach(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    error ("Argument given to \"detach\" when remotely debugging.");
+  
+  if (sr_is_open())
+    gr_clear_all_breakpoints ();
+
+  pop_target ();
+  if (from_tty)
+    puts_filtered ("Ending remote debugging.\n");
+
+  return;
+}  
+
+void
+gr_files_info (ops)
+     struct target_ops *ops;
+{
+#ifdef __GO32__
+  printf_filtered ("\tAttached to DOS asynctsr\n");
+#else
+  printf_filtered ("\tAttached to %s", sr_get_device());
+  if (baud_rate != -1)
+    printf_filtered ("at %d baud", baud_rate);
+  printf_filtered ("\n");
+#endif
+
+  if (exec_bfd)
+    {
+      printf_filtered ("\tand running program %s\n",
+		       bfd_get_filename (exec_bfd));
+    }
+  printf_filtered ("\tusing the %s protocol.\n", ops->to_shortname);
+}
+
+void
+gr_mourn ()
+{
+  gr_clear_all_breakpoints ();
+  unpush_target (gr_get_ops());
+  generic_mourn_inferior ();
+}
+
+void
+gr_kill ()
+{
+  return;
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+void
+gr_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error ("Can't pass arguments to remote process.");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error ("No executable file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+  sr_check_open ();
+
+  gr_kill ();
+  gr_clear_all_breakpoints ();
+
+  init_wait_for_inferior ();
+  gr_checkin();
+
+  insert_breakpoints ();	/* Needed to get correct instruction in cache */
+  proceed (entry_pt, -1, 0);
+}
+
+/* Given a null terminated list of strings LIST, read the input until we find one of
+   them.  Return the index of the string found or -1 on error.  '?' means match
+   any single character. Note that with the algorithm we use, the initial
+   character of the string cannot recur in the string, or we will not find some
+   cases of the string in the input.  If PASSTHROUGH is non-zero, then
+   pass non-matching data on.  */
+
+int
+gr_multi_scan (list, passthrough)
+     char *list[];
+     int passthrough;
+{
+  char *swallowed = NULL; /* holding area */
+  char *swallowed_p = swallowed; /* Current position in swallowed.  */
+  int ch;
+  int ch_handled;
+  int i;
+  int string_count;
+  int max_length;
+  char **plist;
+
+  /* Look through the strings.  Count them.  Find the largest one so we can
+     allocate a holding area.  */
+
+  for (max_length = string_count = i = 0;
+       list[i] != NULL;
+       ++i, ++string_count)
+    {
+      int length = strlen(list[i]);
+
+      if (length > max_length)
+	max_length = length;
+    }
+
+  /* if we have no strings, then something is wrong. */
+  if (string_count == 0)
+    return(-1);
+
+  /* otherwise, we will need a holding area big enough to hold almost two
+     copies of our largest string.  */
+  swallowed_p = swallowed = alloca(max_length << 1);
+
+  /* and a list of pointers to current scan points. */
+  plist = (char **) alloca (string_count * sizeof(*plist));
+
+  /* and initialize */
+  for (i = 0; i < string_count; ++i)
+    plist[i] = list[i];
+
+  for (ch = sr_readchar(); /* loop forever */ ; ch = sr_readchar())
+    {
+      QUIT; /* Let user quit and leave process running */
+      ch_handled = 0;
+
+      for (i = 0; i < string_count; ++i)
+	{
+	  if (ch == *plist[i] || *plist[i] == '?')
+	    {
+	      ++plist[i];
+	      if (*plist[i] == '\0')
+		return(i);
+
+	      if (!ch_handled)
+		*swallowed_p++ = ch;
+
+	      ch_handled = 1;
+	    }
+	  else
+	    plist[i] = list[i];
+	}
+
+      if (!ch_handled)
+	{
+	  char *p;
+
+	  /* Print out any characters which have been swallowed.  */
+	  if (passthrough)
+	    {
+	      for (p = swallowed; p < swallowed_p; ++p)
+		fputc_unfiltered (*p, gdb_stdout);
+
+	      fputc_unfiltered (ch, gdb_stdout);
+	    }
+
+	  swallowed_p = swallowed;
+	}
+    }
+#if 0
+  /* Never reached.  */
+  return(-1);
+#endif
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+void
+gr_prepare_to_store ()
+{
+  /* Do nothing, since we assume we can store individual regs */
+}
+
+/* Read a word from remote address ADDR and return it.
+ * This goes through the data cache.
+ */
+int
+gr_fetch_word (addr)
+     CORE_ADDR addr;
+{
+  return dcache_fetch (gr_get_dcache(), addr);
+}
+
+/* Write a word WORD into remote address ADDR.
+   This goes through the data cache.  */
+
+void
+gr_store_word (addr, word)
+     CORE_ADDR addr;
+     int word;
+{
+  dcache_poke (gr_get_dcache(), addr, word);
+}
+
+void
+_initialize_sr_support ()
+{
+/* FIXME-now: if target is open... */
+  add_show_from_set (add_set_cmd ("remotedevice", no_class,
+				  var_filename, (char *)&sr_settings.device,
+				  "Set device for remote serial I/O.\n\
+This device is used as the serial port when debugging using remote\n\
+targets.", &setlist),
+		     &showlist);
+
+  add_com ("remote <command>", class_obscure, sr_com,
+	   "Send a command to the remote monitor.");
+
+}
diff --git a/gdb/remote-utils.h b/gdb/remote-utils.h
new file mode 100644
index 0000000..d4fcd0e
--- /dev/null
+++ b/gdb/remote-utils.h
@@ -0,0 +1,142 @@
+/* Generic support for remote debugging interfaces.
+
+   Copyright 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef REMOTE_UTILS_H
+#define REMOTE_UTILS_H
+
+#include "serial.h"
+#include "target.h"
+#include "dcache.h"
+
+/* Stuff that should be shared (and handled consistently) among the various
+   remote targets.  */
+
+struct _sr_settings {
+  unsigned int timeout;
+
+  int retries;
+
+  char *device;
+  serial_t desc;
+
+};
+
+extern struct _sr_settings sr_settings;
+
+/* get and set debug value. */
+#define sr_get_debug()			(remote_debug)
+#define sr_set_debug(newval)		(remote_debug = (newval))
+
+/* get and set timeout. */
+#define sr_get_timeout()		(sr_settings.timeout)
+#define sr_set_timeout(newval)		(sr_settings.timeout = (newval))
+
+/* get and set device. */
+#define sr_get_device()			(sr_settings.device)
+#define sr_set_device(newval) \
+{ \
+    if (sr_settings.device) free(sr_settings.device); \
+    sr_settings.device = (newval); \
+}
+
+/* get and set descriptor value. */
+#define sr_get_desc()			(sr_settings.desc)
+#define sr_set_desc(newval)		(sr_settings.desc = (newval))
+
+/* get and set retries. */
+#define sr_get_retries()		(sr_settings.retries)
+#define sr_set_retries(newval)		(sr_settings.retries = (newval))
+
+#define sr_is_open()			(sr_settings.desc != NULL)
+
+#define sr_check_open() 	{ if (!sr_is_open()) \
+				    error ("Remote device not open"); }
+
+struct gr_settings {
+  /* This is our data cache. */
+  DCACHE *dcache;
+  char *prompt;
+  struct target_ops *ops;
+  int (*clear_all_breakpoints)PARAMS((void));
+  memxferfunc readfunc;
+  memxferfunc writefunc;
+  void (*checkin)PARAMS((void));
+};
+
+extern struct gr_settings *gr_settings;
+
+/* get and set dcache. */
+#define gr_get_dcache()			(gr_settings->dcache)
+#define gr_set_dcache(newval)		(gr_settings->dcache = (newval))
+
+/* get and set prompt. */
+#define gr_get_prompt()			(gr_settings->prompt)
+#define gr_set_prompt(newval)		(gr_settings->prompt = (newval))
+
+/* get and set ops. */
+#define gr_get_ops()			(gr_settings->ops)
+#define gr_set_ops(newval)		(gr_settings->ops = (newval))
+
+#define gr_clear_all_breakpoints()	((gr_settings->clear_all_breakpoints)())
+#define gr_checkin()			((gr_settings->checkin)())
+
+/* Keep discarding input until we see the prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an gr_expect_prompt().  Exception:  resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a bug_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+
+#define gr_expect_prompt()	sr_expect(gr_get_prompt())
+
+int gr_fetch_word PARAMS((CORE_ADDR addr));
+int gr_multi_scan PARAMS((char *list[], int passthrough));
+int sr_get_hex_digit PARAMS((int ignore_space));
+int sr_pollchar PARAMS((void));
+int sr_readchar PARAMS((void));
+int sr_timed_read PARAMS((char *buf, int n));
+long sr_get_hex_word PARAMS((void));
+void gr_close PARAMS((int quitting));
+void gr_create_inferior PARAMS((char *execfile, char *args, char **env));
+void gr_detach PARAMS((char *args, int from_tty));
+void gr_files_info PARAMS((struct target_ops *ops));
+void gr_generic_checkin PARAMS((void));
+void gr_kill PARAMS((void));
+void gr_mourn PARAMS((void));
+void gr_prepare_to_store PARAMS((void));
+void gr_store_word PARAMS((CORE_ADDR addr, int word));
+void sr_expect PARAMS((char *string));
+void sr_get_hex_byte PARAMS((char *byt));
+void sr_scan_args PARAMS((char *proto, char *args));
+void sr_write PARAMS((char *a, int l));
+void sr_write_cr PARAMS((char *s));
+
+void gr_open PARAMS((char *args, int from_tty,
+		     struct gr_settings *gr_settings)); 
+void gr_load_image PARAMS((char*, int from_tty));
+#endif /* REMOTE_UTILS_H */
diff --git a/gdb/remote-vx.c b/gdb/remote-vx.c
new file mode 100644
index 0000000..9ad86d4
--- /dev/null
+++ b/gdb/remote-vx.c
@@ -0,0 +1,1467 @@
+/* Memory-access and commands for remote VxWorks processes, for GDB.
+   Copyright (C) 1990-95, 1997-98, 1999 Free Software Foundation, Inc.
+   Contributed by Wind River Systems and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "complaints.h"
+#include "gdbcmd.h"
+#include "bfd.h" /* Required by objfiles.h.  */
+#include "symfile.h" /* Required by objfiles.h.  */
+#include "objfiles.h"
+#include "gdb-stabs.h"
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#define malloc bogon_malloc	/* Sun claims "char *malloc()" not void * */
+#define free bogon_free		/* Sun claims "int free()" not void */
+#define realloc bogon_realloc	/* Sun claims "char *realloc()", not void * */
+#include <rpc/rpc.h>
+#undef malloc
+#undef free
+#undef realloc
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+#include <symtab.h>
+
+/* Maximum number of bytes to transfer in a single
+   PTRACE_{READ,WRITE}DATA request.  */
+#define VX_MEMXFER_MAX 4096
+
+extern void vx_read_register ();
+extern void vx_write_register ();
+extern void symbol_file_command ();
+extern int stop_soon_quietly;		/* for wait_for_inferior */
+
+static int net_step ();
+static int net_ptrace_clnt_call ();	/* Forward decl */
+static enum clnt_stat net_clnt_call ();	/* Forward decl */
+
+/* Target ops structure for accessing memory and such over the net */
+
+static struct target_ops vx_ops;
+
+/* Target ops structure for accessing VxWorks child processes over the net */
+
+static struct target_ops vx_run_ops;
+
+/* Saved name of target host and called function for "info files".
+   Both malloc'd.  */
+
+static char *vx_host;
+static char *vx_running;		/* Called function */
+
+/* Nonzero means target that is being debugged remotely has a floating
+   point processor.  */
+
+int target_has_fp;
+
+/* Default error message when the network is forking up.  */
+
+static const char rpcerr[] = "network target debugging:  rpc error";
+
+CLIENT *pClient;         /* client used in net debugging */
+static int ptraceSock = RPC_ANYSOCK;
+
+enum clnt_stat net_clnt_call();
+static void parse_args ();
+
+static struct timeval rpcTimeout = { 10, 0 };
+
+static char *skip_white_space ();
+static char *find_white_space ();
+ 
+/* Tell the VxWorks target system to download a file.
+   The load addresses of the text, data, and bss segments are
+   stored in *pTextAddr, *pDataAddr, and *pBssAddr (respectively).
+   Returns 0 for success, -1 for failure.  */
+
+static int
+net_load (filename, pTextAddr, pDataAddr, pBssAddr)
+     char *filename;
+     CORE_ADDR *pTextAddr;
+     CORE_ADDR *pDataAddr;
+     CORE_ADDR *pBssAddr;
+{
+  enum clnt_stat status;
+  struct ldfile ldstruct;
+  struct timeval load_timeout;
+
+  memset ((char *) &ldstruct, '\0', sizeof (ldstruct));
+
+  /* We invoke clnt_call () here directly, instead of through
+     net_clnt_call (), because we need to set a large timeout value.
+     The load on the target side can take quite a while, easily
+     more than 10 seconds.  The user can kill this call by typing
+     CTRL-C if there really is a problem with the load.  
+
+     Do not change the tv_sec value without checking -- select() imposes
+     a limit of 10**8 on it for no good reason that I can see...  */
+
+  load_timeout.tv_sec = 99999999;   /* A large number, effectively inf. */
+  load_timeout.tv_usec = 0;
+ 
+  status = clnt_call (pClient, VX_LOAD, xdr_wrapstring, &filename, xdr_ldfile,
+		      &ldstruct, load_timeout);
+
+  if (status == RPC_SUCCESS)
+    {
+      if (*ldstruct.name == 0)	/* load failed on VxWorks side */
+	return -1;
+      *pTextAddr = ldstruct.txt_addr;
+      *pDataAddr = ldstruct.data_addr;
+      *pBssAddr = ldstruct.bss_addr;
+      return 0;
+    }
+  else
+    return -1;
+}
+
+/* returns 0 if successful, errno if RPC failed or VxWorks complains. */
+
+static int
+net_break (addr, procnum)
+     int addr;
+     u_long procnum;
+{
+  enum clnt_stat status;
+  int break_status;
+  Rptrace ptrace_in;  /* XXX This is stupid.  It doesn't need to be a ptrace
+			 structure.  How about something smaller? */
+
+  memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+  break_status = 0;
+
+  ptrace_in.addr = addr;
+  ptrace_in.pid = inferior_pid;
+
+  status = net_clnt_call (procnum, xdr_rptrace, &ptrace_in, xdr_int,
+			  &break_status);
+
+  if (status != RPC_SUCCESS)
+      return errno;
+
+  if (break_status == -1)
+    return ENOMEM;
+  return break_status;	/* probably (FIXME) zero */
+}
+
+/* returns 0 if successful, errno otherwise */
+
+static int
+vx_insert_breakpoint (addr)
+     int addr;
+{
+  return net_break (addr, VX_BREAK_ADD);
+}
+
+/* returns 0 if successful, errno otherwise */
+
+static int
+vx_remove_breakpoint (addr)
+     int addr;
+{
+  return net_break (addr, VX_BREAK_DELETE);
+}
+
+/* Start an inferior process and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.
+   Returns process id.  Errors reported with error().
+   On VxWorks, we ignore exec_file.  */
+ 
+static void
+vx_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  enum clnt_stat status;
+  arg_array passArgs;
+  TASK_START taskStart;
+
+  memset ((char *) &passArgs, '\0', sizeof (passArgs));
+  memset ((char *) &taskStart, '\0', sizeof (taskStart));
+
+  /* parse arguments, put them in passArgs */
+
+  parse_args (args, &passArgs);
+
+  if (passArgs.arg_array_len == 0)
+    error ("You must specify a function name to run, and arguments if any");
+
+  status = net_clnt_call (PROCESS_START, xdr_arg_array, &passArgs,
+			  xdr_TASK_START, &taskStart);
+
+  if ((status != RPC_SUCCESS) || (taskStart.status == -1))
+    error ("Can't create process on remote target machine");
+
+  /* Save the name of the running function */
+  vx_running = savestring (passArgs.arg_array_val[0],
+			   strlen (passArgs.arg_array_val[0]));
+
+  push_target (&vx_run_ops);
+  inferior_pid = taskStart.pid;
+
+  /* We will get a trace trap after one instruction.
+     Insert breakpoints and continue.  */
+
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  stop_soon_quietly = 1;
+  wait_for_inferior ();		/* Get the task spawn event */
+  stop_soon_quietly = 0;
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  proceed (-1, TARGET_SIGNAL_DEFAULT, 0);
+}
+
+/* Fill ARGSTRUCT in argc/argv form with the arguments from the
+   argument string ARGSTRING.  */
+
+static void
+parse_args (arg_string, arg_struct)
+     register char *arg_string;
+     arg_array *arg_struct;
+{
+  register int arg_count = 0;	/* number of arguments */
+  register int arg_index = 0;
+  register char *p0;
+ 
+  memset ((char *) arg_struct, '\0', sizeof (arg_array));
+ 
+  /* first count how many arguments there are */
+
+  p0 = arg_string;
+  while (*p0 != '\0')
+    {
+      if (*(p0 = skip_white_space (p0)) == '\0')
+	break;
+      p0 = find_white_space (p0);
+      arg_count++;
+    }
+
+  arg_struct->arg_array_len = arg_count;
+  arg_struct->arg_array_val = (char **) xmalloc ((arg_count + 1)
+						 * sizeof (char *));
+
+  /* now copy argument strings into arg_struct.  */
+
+  while (*(arg_string = skip_white_space (arg_string)))
+    {
+      p0 = find_white_space (arg_string);
+      arg_struct->arg_array_val[arg_index++] = savestring (arg_string,
+							   p0 - arg_string);
+      arg_string = p0;
+    }
+
+  arg_struct->arg_array_val[arg_count] = NULL;
+}
+
+/* Advance a string pointer across whitespace and return a pointer
+   to the first non-white character.  */
+
+static char *
+skip_white_space (p)
+     register char *p;
+{
+  while (*p == ' ' || *p == '\t')
+    p++;
+  return p;
+}
+    
+/* Search for the first unquoted whitespace character in a string.
+   Returns a pointer to the character, or to the null terminator
+   if no whitespace is found.  */
+
+static char *
+find_white_space (p)
+     register char *p;
+{
+  register int c;
+
+  while ((c = *p) != ' ' && c != '\t' && c)
+    {
+      if (c == '\'' || c == '"')
+	{
+	  while (*++p != c && *p)
+	    {
+	      if (*p == '\\')
+		p++;
+	    }
+	  if (!*p)
+	    break;
+	}
+      p++;
+    }
+  return p;
+}
+    
+/* Poll the VxWorks target system for an event related
+   to the debugged task.
+   Returns -1 if remote wait failed, task status otherwise.  */
+
+static int
+net_wait (pEvent)
+    RDB_EVENT *pEvent;
+{
+    int pid;
+    enum clnt_stat status;
+
+    memset ((char *) pEvent, '\0', sizeof (RDB_EVENT));
+
+    pid = inferior_pid;
+    status = net_clnt_call (PROCESS_WAIT, xdr_int, &pid, xdr_RDB_EVENT,
+			    pEvent);
+
+    /* return (status == RPC_SUCCESS)? pEvent->status: -1; */
+    if (status == RPC_SUCCESS)
+      return ((pEvent->status) ? 1 : 0);
+    else if (status == RPC_TIMEDOUT)
+      return (1);
+    else
+      return (-1);
+}
+    
+/* Suspend the remote task.
+   Returns -1 if suspend fails on target system, 0 otherwise.  */
+
+static int
+net_quit ()
+{
+  int pid;
+  int quit_status;
+  enum clnt_stat status;
+
+  quit_status = 0;
+
+  /* don't let rdbTask suspend itself by passing a pid of 0 */
+
+  if ((pid = inferior_pid) == 0)
+    return -1;
+
+  status = net_clnt_call (VX_TASK_SUSPEND, xdr_int, &pid, xdr_int,
+			  &quit_status);
+
+  return (status == RPC_SUCCESS)? quit_status: -1;
+}
+
+/* Read a register or registers from the remote system.  */
+
+void
+net_read_registers (reg_buf, len, procnum)
+     char *reg_buf;
+     int len;
+     u_long procnum;
+{
+  int status;
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  C_bytes out_data;
+  char message[100];
+
+  memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+  memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
+
+  /* Initialize RPC input argument structure.  */
+
+  ptrace_in.pid = inferior_pid;
+  ptrace_in.info.ttype = NOINFO;
+
+  /* Initialize RPC return value structure.  */
+
+  out_data.bytes = reg_buf;
+  out_data.len = len;
+  ptrace_out.info.more_data = (caddr_t) &out_data;
+
+  /* Call RPC; take an error exit if appropriate.  */
+
+  status = net_ptrace_clnt_call (procnum, &ptrace_in, &ptrace_out);
+  if (status)
+    error (rpcerr);
+  if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      sprintf (message, "reading %s registers", (procnum == PTRACE_GETREGS)
+						 ? "general-purpose"
+						 : "floating-point");
+      perror_with_name (message);
+    }
+}
+
+/* Write register values to a VxWorks target.  REG_BUF points to a buffer
+   containing the raw register values, LEN is the length of REG_BUF in
+   bytes, and PROCNUM is the RPC procedure number (PTRACE_SETREGS or
+   PTRACE_SETFPREGS).  An error exit is taken if the RPC call fails or
+   if an error status is returned by the remote debug server.  This is
+   a utility routine used by vx_write_register ().  */
+
+void
+net_write_registers (reg_buf, len, procnum)
+     char *reg_buf;
+     int len;
+     u_long procnum;
+{
+  int status;
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  C_bytes in_data;
+  char message[100];
+
+  memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+  memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
+
+  /* Initialize RPC input argument structure.  */
+
+  in_data.bytes = reg_buf;
+  in_data.len = len;
+
+  ptrace_in.pid = inferior_pid;
+  ptrace_in.info.ttype = DATA;
+  ptrace_in.info.more_data = (caddr_t) &in_data;
+
+  /* Call RPC; take an error exit if appropriate.  */
+
+  status = net_ptrace_clnt_call (procnum, &ptrace_in, &ptrace_out);
+  if (status)
+    error (rpcerr);
+  if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      sprintf (message, "writing %s registers", (procnum == PTRACE_SETREGS)
+						 ? "general-purpose"
+						 : "floating-point");
+      perror_with_name (message);
+    }
+}
+
+/* Prepare to store registers.  Since we will store all of them,
+   read out their current values now.  */
+
+static void
+vx_prepare_to_store ()
+{
+  /* Fetch all registers, if any of them are not yet fetched.  */
+  read_register_bytes (0, NULL, REGISTER_BYTES);
+}
+
+/* Copy LEN bytes to or from remote inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.  WRITE is true if writing to the
+   inferior.
+   Result is the number of bytes written or read (zero if error).  The
+   protocol allows us to return a negative count, indicating that we can't
+   handle the current address but can handle one N bytes further, but
+   vxworks doesn't give us that information.  */
+
+static int
+vx_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;			/* ignored */
+{
+  int status;
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  C_bytes data;
+  enum ptracereq request;
+  int nleft, nxfer;
+
+  memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+  memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
+
+  ptrace_in.pid = inferior_pid;		/* XXX pid unnecessary for READDATA */
+  ptrace_in.addr = (int) memaddr;	/* Where from */
+  ptrace_in.data = len;			/* How many bytes */
+
+  if (write)
+    {
+      ptrace_in.info.ttype     = DATA;
+      ptrace_in.info.more_data = (caddr_t) &data;
+
+      data.bytes = (caddr_t) myaddr;	/* Where from */
+      data.len   = len;			/* How many bytes (again, for XDR) */
+      request = PTRACE_WRITEDATA;
+    }
+  else
+    {
+      ptrace_out.info.more_data = (caddr_t) &data;
+      request = PTRACE_READDATA;
+    }
+  /* Loop until the entire request has been satisfied, transferring
+     at most VX_MEMXFER_MAX bytes per iteration.  Break from the loop
+     if an error status is returned by the remote debug server.  */
+
+  nleft = len;
+  status = 0;
+
+  while (nleft > 0 && status == 0)
+    {
+      nxfer = min (nleft, VX_MEMXFER_MAX);
+
+      ptrace_in.addr = (int) memaddr;
+      ptrace_in.data = nxfer;
+      data.bytes = (caddr_t) myaddr;
+      data.len = nxfer;
+
+      /* Request a block from the remote debug server; if RPC fails,
+         report an error and return to debugger command level.  */
+
+      if (net_ptrace_clnt_call (request, &ptrace_in, &ptrace_out))
+        error (rpcerr);
+
+      status = ptrace_out.status;
+      if (status == 0)
+        {
+          memaddr += nxfer;
+          myaddr += nxfer;
+          nleft -= nxfer;
+        }
+      else
+        {
+          /* A target-side error has ocurred.  Set errno to the error
+             code chosen by the target so that a later perror () will
+             say something meaningful.  */
+
+          errno = ptrace_out.errno_num;
+        }
+    }
+
+  /* Return the number of bytes transferred.  */
+
+  return (len - nleft);
+}
+
+static void
+vx_files_info ()
+{
+  printf_unfiltered ("\tAttached to host `%s'", vx_host);
+  printf_unfiltered (", which has %sfloating point", target_has_fp? "": "no ");
+  printf_unfiltered (".\n");
+}
+
+static void
+vx_run_files_info ()
+{
+  printf_unfiltered ("\tRunning %s VxWorks process %s", 
+		     vx_running ? "child" : "attached",
+		     local_hex_string (inferior_pid));
+  if (vx_running)
+    printf_unfiltered (", function `%s'", vx_running);
+  printf_unfiltered(".\n");
+}
+
+static void
+vx_resume (pid, step, siggnal)
+     int pid;
+     int step;
+     enum target_signal siggnal;
+{
+  int status;
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  CORE_ADDR cont_addr;
+
+  if (pid == -1)
+    pid = inferior_pid;
+
+  if (siggnal != 0 && siggnal != stop_signal)
+    error ("Cannot send signals to VxWorks processes");
+
+  /* Set CONT_ADDR to the address at which we are continuing,
+     or to 1 if we are continuing from where the program stopped.
+     This conforms to traditional ptrace () usage, but at the same
+     time has special meaning for the VxWorks remote debug server.
+     If the address is not 1, the server knows that the target
+     program is jumping to a new address, which requires special
+     handling if there is a breakpoint at the new address.  */
+
+  cont_addr = read_register (PC_REGNUM);
+  if (cont_addr == stop_pc)
+    cont_addr = 1;
+
+  memset ((char *) &ptrace_in, '\0', sizeof (ptrace_in));
+  memset ((char *) &ptrace_out, '\0', sizeof (ptrace_out));
+
+  ptrace_in.pid = pid;
+  ptrace_in.addr = cont_addr; /* Target side insists on this, or it panics.  */
+
+  if (step)
+    status = net_step();
+  else
+    status = net_ptrace_clnt_call (PTRACE_CONT, &ptrace_in, &ptrace_out);
+
+  if (status)
+    error (rpcerr);
+  if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      perror_with_name ("Resuming remote process");
+    }
+}
+
+static void
+vx_mourn_inferior ()
+{
+  pop_target ();		/* Pop back to no-child state */
+  generic_mourn_inferior ();
+}
+
+
+static void vx_add_symbols PARAMS ((char *, int, CORE_ADDR, CORE_ADDR,
+				    CORE_ADDR));
+
+struct find_sect_args {
+  CORE_ADDR text_start;
+  CORE_ADDR data_start;
+  CORE_ADDR bss_start;
+};
+
+static void find_sect PARAMS ((bfd *, asection *, void *));
+
+static void
+find_sect (abfd, sect, obj)
+     bfd *abfd;
+     asection *sect;
+     PTR obj;
+{
+  struct find_sect_args *args = (struct find_sect_args *)obj;
+
+  if (bfd_get_section_flags (abfd, sect) & (SEC_CODE & SEC_READONLY))
+    args->text_start = bfd_get_section_vma (abfd, sect);
+  else if (bfd_get_section_flags (abfd, sect) & SEC_ALLOC)
+    {
+      if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
+	{
+	  /* Exclude .ctor and .dtor sections which have SEC_CODE set but not
+	     SEC_DATA.  */
+	  if (bfd_get_section_flags (abfd, sect) & SEC_DATA)
+	    args->data_start = bfd_get_section_vma (abfd, sect);
+	}
+      else
+	args->bss_start = bfd_get_section_vma (abfd, sect);
+    }
+}
+
+static void
+vx_add_symbols (name, from_tty, text_addr, data_addr, bss_addr)
+     char *name;
+     int from_tty;
+     CORE_ADDR text_addr;
+     CORE_ADDR data_addr;
+     CORE_ADDR bss_addr;
+{
+  struct section_offsets *offs;
+  struct objfile *objfile;
+  struct find_sect_args ss;
+
+  /* It might be nice to suppress the breakpoint_re_set which happens here
+     because we are going to do one again after the objfile_relocate.  */
+  objfile = symbol_file_add (name, from_tty, 0, 0, 0, 0, 0, 0);
+
+  /* This is a (slightly cheesy) way of superceding the old symbols.  A less
+     cheesy way would be to find the objfile with the same name and
+     free_objfile it.  */
+  objfile_to_front (objfile);
+
+  offs = (struct section_offsets *)
+    alloca (sizeof (struct section_offsets)
+	    + objfile->num_sections * sizeof (offs->offsets));
+  memcpy (offs, objfile->section_offsets,
+	  sizeof (struct section_offsets)
+	  + objfile->num_sections * sizeof (offs->offsets));
+
+  ss.text_start = 0;
+  ss.data_start = 0;
+  ss.bss_start = 0;
+  bfd_map_over_sections (objfile->obfd, find_sect, &ss);
+
+  /* Both COFF and b.out frontends use these SECT_OFF_* values.  */
+  ANOFFSET (offs, SECT_OFF_TEXT) = text_addr - ss.text_start;
+  ANOFFSET (offs, SECT_OFF_DATA) = data_addr - ss.data_start;
+  ANOFFSET (offs, SECT_OFF_BSS) = bss_addr - ss.bss_start;
+  objfile_relocate (objfile, offs);
+}
+
+/* This function allows the addition of incrementally linked object files.  */
+
+static void
+vx_load_command (arg_string, from_tty)
+     char *arg_string;
+     int from_tty;
+{
+  CORE_ADDR text_addr;
+  CORE_ADDR data_addr;
+  CORE_ADDR bss_addr;
+
+  if (arg_string == 0)
+    error ("The load command takes a file name");
+
+  arg_string = tilde_expand (arg_string);
+  make_cleanup (free, arg_string);
+
+  dont_repeat ();
+
+  /* Refuse to load the module if a debugged task is running.  Doing so
+     can have a number of unpleasant consequences to the running task.  */
+
+  if (inferior_pid != 0 && target_has_execution)
+    {
+      if (query ("You may not load a module while the target task is running.\n\
+Kill the target task? "))
+        target_kill ();
+      else
+        error ("Load cancelled.");
+    }
+
+  QUIT;
+  immediate_quit++;
+  if (net_load (arg_string, &text_addr, &data_addr, &bss_addr) == -1)
+    error ("Load failed on target machine");
+  immediate_quit--;
+
+  vx_add_symbols (arg_string, from_tty, text_addr, data_addr, bss_addr);
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  reinit_frame_cache ();
+}
+
+/* Single step the target program at the source or machine level.
+   Takes an error exit if rpc fails.
+   Returns -1 if remote single-step operation fails, else 0.  */
+
+static int
+net_step ()
+{
+  enum clnt_stat status;
+  int step_status;
+  SOURCE_STEP source_step;
+
+  source_step.taskId = inferior_pid;
+
+  if (step_range_end)
+    {
+      source_step.startAddr = step_range_start;
+      source_step.endAddr = step_range_end;
+    }
+  else
+    {
+      source_step.startAddr = 0;
+      source_step.endAddr = 0;
+    }
+
+  status = net_clnt_call (VX_SOURCE_STEP, xdr_SOURCE_STEP, &source_step,
+			  xdr_int, &step_status);
+
+  if (status == RPC_SUCCESS)
+    return step_status;
+  else 
+    error (rpcerr);
+}
+
+/* Emulate ptrace using RPC calls to the VxWorks target system.
+   Returns nonzero (-1) if RPC status to VxWorks is bad, 0 otherwise.  */
+
+static int
+net_ptrace_clnt_call (request, pPtraceIn, pPtraceOut)
+    enum ptracereq request;
+    Rptrace *pPtraceIn;
+    Ptrace_return *pPtraceOut;
+{
+  enum clnt_stat status;
+
+  status = net_clnt_call (request, xdr_rptrace, pPtraceIn, xdr_ptrace_return,
+			  pPtraceOut);
+
+  if (status != RPC_SUCCESS)
+      return -1;
+
+  return 0;
+}
+
+/* Query the target for the name of the file from which VxWorks was
+   booted.  pBootFile is the address of a pointer to the buffer to
+   receive the file name; if the pointer pointed to by pBootFile is 
+   NULL, memory for the buffer will be allocated by XDR.
+   Returns -1 if rpc failed, 0 otherwise.  */
+
+static int
+net_get_boot_file (pBootFile)
+     char **pBootFile;
+{
+  enum clnt_stat status;
+
+  status = net_clnt_call (VX_BOOT_FILE_INQ, xdr_void, (char *) 0,
+			  xdr_wrapstring, pBootFile);
+  return (status == RPC_SUCCESS) ? 0 : -1;
+}
+
+/* Fetch a list of loaded object modules from the VxWorks target.
+   Returns -1 if rpc failed, 0 otherwise
+   There's no way to check if the returned loadTable is correct.
+   VxWorks doesn't check it.  */
+
+static int
+net_get_symbols (pLoadTable)
+     ldtabl *pLoadTable;		/* return pointer to ldtabl here */
+{
+  enum clnt_stat status;
+
+  memset ((char *) pLoadTable, '\0', sizeof (struct ldtabl));
+
+  status = net_clnt_call (VX_STATE_INQ, xdr_void, 0, xdr_ldtabl, pLoadTable);
+  return (status == RPC_SUCCESS) ? 0 : -1;
+}
+
+/* Look up a symbol in the VxWorks target's symbol table.
+   Returns status of symbol read on target side (0=success, -1=fail)
+   Returns -1 and complain()s if rpc fails.  */
+
+struct complaint cant_contact_target =
+  {"Lost contact with VxWorks target", 0, 0};
+
+static int
+vx_lookup_symbol (name, pAddr)
+     char *name;		/* symbol name */
+     CORE_ADDR *pAddr;
+{
+  enum clnt_stat status;
+  SYMBOL_ADDR symbolAddr;
+
+  *pAddr = 0;
+  memset ((char *) &symbolAddr, '\0', sizeof (symbolAddr));
+
+  status = net_clnt_call (VX_SYMBOL_INQ, xdr_wrapstring, &name,
+			  xdr_SYMBOL_ADDR, &symbolAddr);
+  if (status != RPC_SUCCESS)
+    {
+      complain (&cant_contact_target);
+      return -1;
+    }
+
+  *pAddr = symbolAddr.addr;
+  return symbolAddr.status;
+}
+
+/* Check to see if the VxWorks target has a floating point coprocessor.
+   Returns 1 if target has floating point processor, 0 otherwise.
+   Calls error() if rpc fails.  */
+
+static int
+net_check_for_fp ()
+{
+  enum clnt_stat status;
+  bool_t fp = 0;	/* true if fp processor is present on target board */
+
+  status = net_clnt_call (VX_FP_INQUIRE, xdr_void, 0, xdr_bool, &fp);
+  if (status != RPC_SUCCESS)
+    error (rpcerr);
+
+   return (int) fp;
+}
+
+/* Establish an RPC connection with the VxWorks target system.
+   Calls error () if unable to establish connection.  */
+
+static void
+net_connect (host)
+     char *host;
+{
+  struct sockaddr_in destAddr;
+  struct hostent *destHost;
+  unsigned long addr;
+
+  /* Get the internet address for the given host.  Allow a numeric
+     IP address or a hostname.  */
+
+  addr = inet_addr (host);
+  if (addr == -1)
+    {
+      destHost = (struct hostent *) gethostbyname (host);
+      if (destHost == NULL)
+	/* FIXME: Probably should include hostname here in quotes.
+	   For example if the user types "target vxworks vx960 " it should
+	   say "Invalid host `vx960 '." not just "Invalid hostname".  */
+	error ("Invalid hostname.  Couldn't find remote host address.");
+      addr = * (unsigned long *) destHost->h_addr;
+    }
+
+  memset (&destAddr, '\0', sizeof (destAddr));
+
+  destAddr.sin_addr.s_addr = addr;
+  destAddr.sin_family      = AF_INET;
+  destAddr.sin_port        = 0;	/* set to actual port that remote
+			           ptrace is listening on.  */
+
+  /* Create a tcp client transport on which to issue
+     calls to the remote ptrace server.  */
+
+  ptraceSock = RPC_ANYSOCK;
+  pClient = clnttcp_create (&destAddr, RDBPROG, RDBVERS, &ptraceSock, 0, 0);
+  /* FIXME, here is where we deal with different version numbers of the
+     proto */
+
+  if (pClient == NULL)
+    {
+      clnt_pcreateerror ("\tnet_connect");
+      error ("Couldn't connect to remote target.");
+    }
+}
+
+/* Sleep for the specified number of milliseconds 
+ * (assumed to be less than 1000).
+ * If select () is interrupted, returns immediately;
+ * takes an error exit if select () fails for some other reason.
+ */
+
+static void
+sleep_ms (ms)
+     long ms;
+{
+  struct timeval select_timeout;
+  int status;
+
+  select_timeout.tv_sec = 0;
+  select_timeout.tv_usec = ms * 1000;
+
+  status = select (0, (fd_set *) 0, (fd_set *) 0, (fd_set *) 0,
+		   &select_timeout);
+
+  if (status < 0 && errno != EINTR)
+    perror_with_name ("select");
+}
+
+static int
+vx_wait (pid_to_wait_for, status)
+     int pid_to_wait_for;
+     struct target_waitstatus *status;
+{
+  register int pid;
+  RDB_EVENT rdbEvent;
+  int quit_failed;
+
+  do
+    {
+      /* If CTRL-C is hit during this loop,
+	 suspend the inferior process.  */
+
+      quit_failed = 0;
+      if (quit_flag)
+	{
+	  quit_failed = (net_quit () == -1);
+	  quit_flag = 0;
+	}
+
+      /* If a net_quit () or net_wait () call has failed,
+	 allow the user to break the connection with the target.
+	 We can't simply error () out of this loop, since the 
+	 data structures representing the state of the inferior
+	 are in an inconsistent state.  */
+
+      if (quit_failed || net_wait (&rdbEvent) == -1)
+	{
+	  terminal_ours ();
+	  if (query ("Can't %s.  Disconnect from target system? ",
+		     (quit_failed) ? "suspend remote task"
+		                   : "get status of remote task"))
+	    {
+	      target_mourn_inferior();
+	      error ("Use the \"target\" command to reconnect.");
+	    }
+	  else
+	    {
+	      terminal_inferior ();
+	      continue;
+	    }
+	}
+      
+      pid = rdbEvent.taskId;
+      if (pid == 0)
+	{
+	  sleep_ms (200);	/* FIXME Don't kill the network too badly */
+	}
+      else if (pid != inferior_pid)
+	fatal ("Bad pid for debugged task: %s\n",
+	       local_hex_string((unsigned long) pid));
+    } while (pid == 0);
+
+  /* The mostly likely kind.  */
+  status->kind = TARGET_WAITKIND_STOPPED;
+
+  switch (rdbEvent.eventType)
+    {
+    case EVENT_EXIT:
+      status->kind = TARGET_WAITKIND_EXITED;
+      /* FIXME is it possible to distinguish between a
+	 normal vs abnormal exit in VxWorks? */
+      status->value.integer = 0;
+      break;
+
+    case EVENT_START:
+      /* Task was just started. */
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+
+    case EVENT_STOP:
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      /* XXX was it stopped by a signal?  act accordingly */
+      break;
+
+    case EVENT_BREAK:		/* Breakpoint was hit. */
+      status->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+
+    case EVENT_SUSPEND:		/* Task was suspended, probably by ^C. */
+      status->value.sig = TARGET_SIGNAL_INT;
+      break;
+
+    case EVENT_BUS_ERR:		/* Task made evil nasty reference. */
+      status->value.sig = TARGET_SIGNAL_BUS;
+      break;
+
+    case EVENT_ZERO_DIV:	/* Division by zero */
+      status->value.sig = TARGET_SIGNAL_FPE;
+      break;
+
+    case EVENT_SIGNAL:
+#ifdef I80960
+      status->value.sig = i960_fault_to_signal (rdbEvent.sigType);
+#else
+      /* Back in the old days, before enum target_signal, this code used
+	 to add NSIG to the signal number and claim that PRINT_RANDOM_SIGNAL
+	 would take care of it.  But PRINT_RANDOM_SIGNAL has never been
+	 defined except on the i960, so I don't really know what we are
+	 supposed to do on other architectures.  */
+      status->value.sig = TARGET_SIGNAL_UNKNOWN;
+#endif
+      break;
+    } /* switch */
+  return pid;
+}
+
+static int
+symbol_stub (arg)
+     char *arg;
+{
+  symbol_file_command (arg, 0);
+  return 1;
+}
+
+static int
+add_symbol_stub (arg)
+     char *arg;
+{
+  struct ldfile *pLoadFile = (struct ldfile *)arg;
+
+  printf_unfiltered("\t%s: ", pLoadFile->name);
+  vx_add_symbols (pLoadFile->name, 0, pLoadFile->txt_addr,
+		  pLoadFile->data_addr, pLoadFile->bss_addr);
+  printf_unfiltered ("ok\n");
+  return 1;
+}
+/* Target command for VxWorks target systems.
+
+   Used in vxgdb.  Takes the name of a remote target machine
+   running vxWorks and connects to it to initialize remote network
+   debugging.  */
+
+static void
+vx_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  extern int close ();
+  char *bootFile;
+  extern char *source_path;
+  struct ldtabl loadTable;
+  struct ldfile *pLoadFile;
+  int i;
+  extern CLIENT *pClient;
+  int symbols_added = 0;
+
+  if (!args)
+    error_no_arg ("target machine name");
+
+  target_preopen (from_tty);
+  
+  unpush_target (&vx_ops);
+  printf_unfiltered ("Attaching remote machine across net...\n");
+  gdb_flush (gdb_stdout);
+
+  /* Allow the user to kill the connect attempt by typing ^C.
+     Wait until the call to target_has_fp () completes before
+     disallowing an immediate quit, since even if net_connect ()
+     is successful, the remote debug server might be hung.  */
+
+  immediate_quit++;
+
+  net_connect (args);
+  target_has_fp = net_check_for_fp ();
+  printf_filtered ("Connected to %s.\n", args);
+
+  immediate_quit--;
+
+  push_target (&vx_ops);
+
+  /* Save a copy of the target host's name.  */
+  vx_host = savestring (args, strlen (args));
+
+  /* Find out the name of the file from which the target was booted
+     and load its symbol table.  */
+
+  printf_filtered ("Looking in Unix path for all loaded modules:\n");
+  bootFile = NULL;
+  if (!net_get_boot_file (&bootFile))
+    {
+      if (*bootFile)
+	{
+	  printf_filtered ("\t%s: ", bootFile);
+	  /* This assumes that the kernel is never relocated.  Hope that is an
+	     accurate assumption.  */
+	  if (catch_errors
+	      (symbol_stub,
+	       bootFile,
+	       "Error while reading symbols from boot file:\n",
+	       RETURN_MASK_ALL))
+	    puts_filtered ("ok\n");
+	}
+      else if (from_tty)
+	printf_unfiltered ("VxWorks kernel symbols not loaded.\n");
+    }
+  else
+    error ("Can't retrieve boot file name from target machine.");
+
+  clnt_freeres (pClient, xdr_wrapstring, &bootFile);
+
+  if (net_get_symbols (&loadTable) != 0)
+    error ("Can't read loaded modules from target machine");
+
+  i = 0-1;
+  while (++i < loadTable.tbl_size)
+    {
+      QUIT;	/* FIXME, avoids clnt_freeres below:  mem leak */
+      pLoadFile = &loadTable.tbl_ent [i];
+#ifdef WRS_ORIG
+  {
+    register int desc;
+    struct cleanup *old_chain;
+    char *fullname = NULL;
+
+    desc = openp (source_path, 0, pLoadFile->name, O_RDONLY, 0, &fullname);
+    if (desc < 0)
+	perror_with_name (pLoadFile->name);
+    old_chain = make_cleanup (close, desc);
+    add_file_at_addr (fullname, desc, pLoadFile->txt_addr, pLoadFile->data_addr,
+		      pLoadFile->bss_addr);
+    do_cleanups (old_chain);
+  }
+#else
+      /* FIXME: Is there something better to search than the PATH? (probably
+	 not the source path, since source might be in different directories
+	 than objects.  */
+
+      if (catch_errors (add_symbol_stub, (char *)pLoadFile, (char *)0,
+			RETURN_MASK_ALL))
+	symbols_added = 1;
+#endif
+    }
+  printf_filtered ("Done.\n");
+
+  clnt_freeres (pClient, xdr_ldtabl, &loadTable);
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  if (symbols_added)
+    reinit_frame_cache ();
+}
+
+/* Takes a task started up outside of gdb and ``attaches'' to it.
+   This stops it cold in its tracks and allows us to start tracing it.  */
+
+static void
+vx_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  unsigned long pid;
+  char *cptr = 0;
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  int status;
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+  pid = strtoul (args, &cptr, 0);
+  if ((cptr == args) || (*cptr != '\0'))
+    error ("Invalid process-id -- give a single number in decimal or 0xhex");
+
+  if (from_tty)
+    printf_unfiltered ("Attaching pid %s.\n",
+		       local_hex_string((unsigned long) pid));
+
+  memset ((char *)&ptrace_in,  '\0', sizeof (ptrace_in));
+  memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
+  ptrace_in.pid = pid;
+
+  status = net_ptrace_clnt_call (PTRACE_ATTACH, &ptrace_in, &ptrace_out);
+  if (status == -1)
+    error (rpcerr);
+  if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      perror_with_name ("Attaching remote process");
+    }
+
+  /* It worked... */
+
+  inferior_pid = pid;
+  push_target (&vx_run_ops);
+
+  if (vx_running)
+    free (vx_running);
+  vx_running = 0;
+}
+
+/* detach_command --
+   takes a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via the normal ptrace (PTRACE_TRACEME).  */
+
+static void
+vx_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  int signal = 0;
+  int status;
+
+  if (args)
+    error ("Argument given to VxWorks \"detach\".");
+
+  if (from_tty)
+      printf_unfiltered ("Detaching pid %s.\n",
+	      local_hex_string((unsigned long) inferior_pid));
+
+  if (args)		/* FIXME, should be possible to leave suspended */
+    signal = atoi (args);
+  
+  memset ((char *)&ptrace_in,  '\0', sizeof (ptrace_in));
+  memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
+  ptrace_in.pid = inferior_pid;
+
+  status = net_ptrace_clnt_call (PTRACE_DETACH, &ptrace_in, &ptrace_out);
+  if (status == -1)
+    error (rpcerr);
+  if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      perror_with_name ("Detaching VxWorks process");
+    }
+
+  inferior_pid = 0;
+  pop_target ();	/* go back to non-executing VxWorks connection */
+}
+
+/* vx_kill -- takes a running task and wipes it out.  */
+
+static void
+vx_kill ()
+{
+  Rptrace ptrace_in;
+  Ptrace_return ptrace_out;
+  int status;
+
+  printf_unfiltered ("Killing pid %s.\n", local_hex_string((unsigned long) inferior_pid));
+
+  memset ((char *)&ptrace_in,  '\0', sizeof (ptrace_in));
+  memset ((char *)&ptrace_out, '\0', sizeof (ptrace_out));
+  ptrace_in.pid = inferior_pid;
+
+  status = net_ptrace_clnt_call (PTRACE_KILL, &ptrace_in, &ptrace_out);
+  if (status == -1)
+    warning (rpcerr);
+  else if (ptrace_out.status == -1)
+    {
+      errno = ptrace_out.errno_num;
+      perror_with_name ("Killing VxWorks process");
+    }
+
+  /* If it gives good status, the process is *gone*, no events remain.
+     If the kill failed, assume the process is gone anyhow.  */
+  inferior_pid = 0;
+  pop_target ();	/* go back to non-executing VxWorks connection */
+}
+
+/* Clean up from the VxWorks process target as it goes away.  */
+
+static void
+vx_proc_close (quitting)
+     int quitting;
+{
+  inferior_pid = 0;		/* No longer have a process.  */
+  if (vx_running)
+    free (vx_running);
+  vx_running = 0;
+}
+
+/* Make an RPC call to the VxWorks target.
+   Returns RPC status.  */
+
+static enum clnt_stat
+net_clnt_call (procNum, inProc, in, outProc, out)
+    enum ptracereq procNum;
+    xdrproc_t inProc;
+    char *in;
+    xdrproc_t outProc;
+    char *out;
+{
+  enum clnt_stat status;
+  
+  status = clnt_call (pClient, procNum, inProc, in, outProc, out, rpcTimeout);
+
+  if (status != RPC_SUCCESS)
+      clnt_perrno (status);
+
+  return status;
+}
+
+/* Clean up before losing control.  */
+
+static void
+vx_close (quitting)
+     int quitting;
+{
+  if (pClient)
+    clnt_destroy (pClient);	/* The net connection */
+  pClient = 0;
+
+  if (vx_host)
+    free (vx_host);		/* The hostname */
+  vx_host = 0;
+}
+
+/* A vxprocess target should be started via "run" not "target".  */
+/*ARGSUSED*/
+static void
+vx_proc_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a VxWorks process.");
+}
+
+static void
+init_vx_ops ()
+{
+  vx_ops.to_shortname = "vxworks";
+  vx_ops.to_longname = "VxWorks target memory via RPC over TCP/IP";
+  vx_ops.to_doc = "Use VxWorks target memory.  \n\
+Specify the name of the machine to connect to.";
+  vx_ops.to_open = vx_open;
+  vx_ops.to_close = vx_close;
+  vx_ops.to_attach = vx_attach;
+  vx_ops.to_xfer_memory = vx_xfer_memory;
+  vx_ops.to_files_info = vx_files_info;
+  vx_ops.to_load = vx_load_command;
+  vx_ops.to_lookup_symbol = vx_lookup_symbol;
+  vx_ops.to_create_inferior = vx_create_inferior;
+  vx_ops.to_stratum = core_stratum;
+  vx_ops.to_has_all_memory = 1;
+  vx_ops.to_has_memory = 1;
+  vx_ops.to_magic = OPS_MAGIC;		/* Always the last thing */
+};
+
+static void
+init_vx_run_ops ()
+{
+  vx_run_ops.to_shortname = "vxprocess";
+  vx_run_ops.to_longname = "VxWorks process";
+  vx_run_ops.to_doc = "VxWorks process; started by the \"run\" command.";
+  vx_run_ops.to_open = vx_proc_open;
+  vx_run_ops.to_close = vx_proc_close;
+  vx_run_ops.to_detach = vx_detach;
+  vx_run_ops.to_resume = vx_resume;
+  vx_run_ops.to_wait = vx_wait;
+  vx_run_ops.to_fetch_registers = vx_read_register;
+  vx_run_ops.to_store_registers = vx_write_register;
+  vx_run_ops.to_prepare_to_store = vx_prepare_to_store;
+  vx_run_ops.to_xfer_memory = vx_xfer_memory;
+  vx_run_ops.to_files_info = vx_run_files_info;
+  vx_run_ops.to_insert_breakpoint = vx_insert_breakpoint;
+  vx_run_ops.to_remove_breakpoint = vx_remove_breakpoint;
+  vx_run_ops.to_kill = vx_kill;
+  vx_run_ops.to_load = vx_load_command;
+  vx_run_ops.to_lookup_symbol = vx_lookup_symbol;
+  vx_run_ops.to_mourn_inferior = vx_mourn_inferior ;
+  vx_run_ops.to_stratum = process_stratum;
+  vx_run_ops.to_has_memory = 1;
+  vx_run_ops.to_has_stack = 1;
+  vx_run_ops.to_has_registers = 1;
+  vx_run_ops.to_has_execution = 1;	
+  vx_run_ops.to_magic = OPS_MAGIC;	
+}
+
+void
+_initialize_vx ()
+{
+  init_vx_ops ();
+  add_target (&vx_ops);
+  init_vx_run_ops ();
+  add_target (&vx_run_ops);
+
+  add_show_from_set
+    (add_set_cmd ("vxworks-timeout", class_support, var_uinteger,
+		  (char *) &rpcTimeout.tv_sec,
+		  "Set seconds to wait for rpc calls to return.\n\
+Set the number of seconds to wait for rpc calls to return.", &setlist),
+     &showlist);
+}
diff --git a/gdb/remote-vx29k.c b/gdb/remote-vx29k.c
new file mode 100644
index 0000000..e6fc2c7
--- /dev/null
+++ b/gdb/remote-vx29k.c
@@ -0,0 +1,188 @@
+/* Am29k-dependent portions of the RPC protocol
+   used with a VxWorks target 
+
+Contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include "defs.h"
+
+#include "vx-share/regPacket.h"  
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "symfile.h"		/* for struct complaint */
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+
+#ifdef _AIX                     /* IBM claims "void *malloc()" not char * */
+#define malloc bogon_malloc
+#endif
+
+#include <rpc/rpc.h>
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+/* get rid of value.h if possible */
+#include <value.h>
+#include <symtab.h>
+
+/* Flag set if target has fpu */
+
+extern int target_has_fp;
+
+/* Generic register read/write routines in remote-vx.c.  */
+
+extern void net_read_registers ();
+extern void net_write_registers ();
+
+/* Read a register or registers from the VxWorks target.
+   REGNO is the register to read, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_read_register (regno)
+     int regno;
+{
+  char am29k_greg_packet[AM29K_GREG_PLEN];
+  char am29k_fpreg_packet[AM29K_FPREG_PLEN];
+
+  /* Get general-purpose registers.  When copying values into
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  net_read_registers (am29k_greg_packet, AM29K_GREG_PLEN, PTRACE_GETREGS);
+
+  /* Now copy the register values into registers[].
+     Note that this code depends on the ordering of the REGNUMs
+     as defined in "tm-29k.h".  */
+
+  bcopy (&am29k_greg_packet[AM29K_R_GR96],
+	 &registers[REGISTER_BYTE (GR96_REGNUM)], 160 * AM29K_GREG_SIZE);
+  bcopy (&am29k_greg_packet[AM29K_R_VAB],
+	 &registers[REGISTER_BYTE (VAB_REGNUM)], 15 * AM29K_GREG_SIZE);
+  registers[REGISTER_BYTE (INTE_REGNUM)] = am29k_greg_packet[AM29K_R_INTE];
+  bcopy (&am29k_greg_packet[AM29K_R_RSP],
+	 &registers[REGISTER_BYTE (GR1_REGNUM)], 5 * AM29K_GREG_SIZE);
+
+  /* PAD For now, don't care about exop register */
+
+  memset (&registers[REGISTER_BYTE (EXO_REGNUM)], '\0', AM29K_GREG_SIZE);
+
+  /* If the target has floating point registers, fetch them.
+     Otherwise, zero the floating point register values in
+     registers[] for good measure, even though we might not
+     need to.  */
+
+  if (target_has_fp)
+    {
+      net_read_registers (am29k_fpreg_packet, AM29K_FPREG_PLEN,
+                          PTRACE_GETFPREGS);
+      registers[REGISTER_BYTE (FPE_REGNUM)] = am29k_fpreg_packet[AM29K_R_FPE];
+      registers[REGISTER_BYTE (FPS_REGNUM)] = am29k_fpreg_packet[AM29K_R_FPS];
+
+      /* PAD For now, don't care about registers (?) AI0 to q */
+
+      memset (&registers[REGISTER_BYTE (161)], '\0', 21 * AM29K_FPREG_SIZE);
+    }
+  else
+    { 
+      memset (&registers[REGISTER_BYTE (FPE_REGNUM)], '\0', AM29K_FPREG_SIZE);
+      memset (&registers[REGISTER_BYTE (FPS_REGNUM)], '\0', AM29K_FPREG_SIZE);
+
+      /* PAD For now, don't care about registers (?) AI0 to q */
+
+      memset (&registers[REGISTER_BYTE (161)], '\0', 21 * AM29K_FPREG_SIZE);
+    }
+
+  /* Mark the register cache valid.  */
+
+  registers_fetched ();
+}
+
+/* Store a register or registers into the VxWorks target.
+   REGNO is the register to store, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_write_register (regno)
+     int regno;
+{
+  char am29k_greg_packet[AM29K_GREG_PLEN];
+  char am29k_fpreg_packet[AM29K_FPREG_PLEN];
+
+  /* Store general purpose registers.  When copying values from
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  bcopy (&registers[REGISTER_BYTE (GR96_REGNUM)],
+	 &am29k_greg_packet[AM29K_R_GR96], 160 * AM29K_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (VAB_REGNUM)],
+	 &am29k_greg_packet[AM29K_R_VAB], 15 * AM29K_GREG_SIZE);
+  am29k_greg_packet[AM29K_R_INTE] = registers[REGISTER_BYTE (INTE_REGNUM)];
+  bcopy (&registers[REGISTER_BYTE (GR1_REGNUM)],
+	 &am29k_greg_packet[AM29K_R_RSP], 5 * AM29K_GREG_SIZE);
+
+  net_write_registers (am29k_greg_packet, AM29K_GREG_PLEN, PTRACE_SETREGS);
+
+  /* Store floating point registers if the target has them.  */
+
+  if (target_has_fp)
+    {
+      am29k_fpreg_packet[AM29K_R_FPE] = registers[REGISTER_BYTE (FPE_REGNUM)];
+      am29k_fpreg_packet[AM29K_R_FPS] = registers[REGISTER_BYTE (FPS_REGNUM)];
+
+      net_write_registers (am29k_fpreg_packet, AM29K_FPREG_PLEN,
+                           PTRACE_SETFPREGS);
+    }
+}
+
+/* VxWorks zeroes fp when the task is initialized; we use this
+   to terminate the frame chain. Chain means here the nominal address of
+   a frame, that is, the return address (lr0) address in the stack. To
+   obtain the frame pointer (lr1) contents, we must add 4 bytes.
+   Note : may be we should modify init_frame_info() to get the frame pointer
+          and store it into the frame_info struct rather than reading its
+          contents when FRAME_CHAIN_VALID is invoked. */
+
+int
+vx29k_frame_chain_valid (chain, thisframe)
+     CORE_ADDR chain;
+     struct frame_info *thisframe;      /* not used here */
+{
+   int fp_contents;
+
+   read_memory ((CORE_ADDR)(chain + 4), (char *) &fp_contents, 4);
+   return (fp_contents != 0);
+}
+
diff --git a/gdb/remote-vx68.c b/gdb/remote-vx68.c
new file mode 100644
index 0000000..c6ceda1
--- /dev/null
+++ b/gdb/remote-vx68.c
@@ -0,0 +1,158 @@
+/* 68k-dependent portions of the RPC protocol
+   used with a VxWorks target 
+
+Contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include "defs.h"
+
+#include "vx-share/regPacket.h"  
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "symfile.h"		/* for struct complaint */
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+
+#ifdef _AIX			/* IBM claims "void *malloc()" not char * */
+#define malloc bogon_malloc
+#endif
+
+#include <rpc/rpc.h>
+
+#ifdef _AIX
+#undef malloc
+#endif
+
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+/* get rid of value.h if possible */
+#include <value.h>
+#include <symtab.h>
+
+/* Flag set if target has fpu */
+
+extern int target_has_fp;
+
+/* Generic register read/write routines in remote-vx.c.  */
+
+extern void net_read_registers ();
+extern void net_write_registers ();
+
+/* Read a register or registers from the VxWorks target.
+   REGNO is the register to read, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_read_register (regno)
+     int regno;
+{
+  char mc68k_greg_packet[MC68K_GREG_PLEN];
+  char mc68k_fpreg_packet[MC68K_FPREG_PLEN];
+
+  /* Get general-purpose registers.  */
+
+  net_read_registers (mc68k_greg_packet, MC68K_GREG_PLEN, PTRACE_GETREGS);
+
+  bcopy (&mc68k_greg_packet[MC68K_R_D0], registers, 16 * MC68K_GREG_SIZE);
+  bcopy (&mc68k_greg_packet[MC68K_R_SR], &registers[REGISTER_BYTE (PS_REGNUM)],
+	 MC68K_GREG_SIZE);
+  bcopy (&mc68k_greg_packet[MC68K_R_PC], &registers[REGISTER_BYTE (PC_REGNUM)],
+	 MC68K_GREG_SIZE);
+
+  /* Get floating-point registers, if the target system has them.
+     Otherwise, zero them.  */
+
+  if (target_has_fp)
+    {
+      net_read_registers (mc68k_fpreg_packet, MC68K_FPREG_PLEN,
+			  PTRACE_GETFPREGS);
+
+      bcopy (&mc68k_fpreg_packet[MC68K_R_FP0],
+	     &registers[REGISTER_BYTE (FP0_REGNUM)],
+	     MC68K_FPREG_SIZE * 8);
+      bcopy (&mc68k_fpreg_packet[MC68K_R_FPCR],
+	     &registers[REGISTER_BYTE (FPC_REGNUM)],
+	     MC68K_FPREG_PLEN - (MC68K_FPREG_SIZE * 8));
+    }
+  else
+    {
+      bzero (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	     MC68K_FPREG_SIZE * 8);
+      bzero (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	     MC68K_FPREG_PLEN - (MC68K_FPREG_SIZE * 8));
+    }
+
+  /* Mark the register cache valid.  */
+
+  registers_fetched ();
+}
+
+/* Store a register or registers into the VxWorks target.
+   REGNO is the register to store, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_write_register (regno)
+     int regno;
+{
+  char mc68k_greg_packet[MC68K_GREG_PLEN];
+  char mc68k_fpreg_packet[MC68K_FPREG_PLEN];
+
+  /* Store general-purpose registers.  */
+
+  bcopy (registers, &mc68k_greg_packet[MC68K_R_D0], 16 * MC68K_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (PS_REGNUM)],
+	 &mc68k_greg_packet[MC68K_R_SR], MC68K_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (PC_REGNUM)],
+	 &mc68k_greg_packet[MC68K_R_PC], MC68K_GREG_SIZE);
+
+  net_write_registers (mc68k_greg_packet, MC68K_GREG_PLEN, PTRACE_SETREGS);
+
+  /* Store floating point registers if the target has them.  */
+
+  if (target_has_fp)
+    {
+      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	     &mc68k_fpreg_packet[MC68K_R_FP0],
+	     MC68K_FPREG_SIZE * 8);
+      bcopy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	     &mc68k_fpreg_packet[MC68K_R_FPCR],
+	     MC68K_FPREG_PLEN - (MC68K_FPREG_SIZE * 8));
+
+      net_write_registers (mc68k_fpreg_packet, MC68K_FPREG_PLEN,
+			   PTRACE_SETFPREGS);
+    }
+}
diff --git a/gdb/remote-vx960.c b/gdb/remote-vx960.c
new file mode 100644
index 0000000..bb4fbee
--- /dev/null
+++ b/gdb/remote-vx960.c
@@ -0,0 +1,163 @@
+/* i80960-dependent portions of the RPC protocol
+   used with a VxWorks target 
+
+Contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include "defs.h"
+
+#include "vx-share/regPacket.h"  
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "symfile.h"		/* for struct complaint */
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+
+#ifdef _AIX                     /* IBM claims "void *malloc()" not char * */
+#define malloc bogon_malloc
+#endif
+
+#include <rpc/rpc.h>
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+/* get rid of value.h if possible */
+#include <value.h>
+#include <symtab.h>
+
+/* Flag set if target has fpu */
+
+extern int target_has_fp;
+
+/* 960 floating point format descriptor, from "i960-tdep.c."  */
+
+extern struct ext_format ext_format_i960;
+
+/* Generic register read/write routines in remote-vx.c.  */
+
+extern void net_read_registers ();
+extern void net_write_registers ();
+
+/* Read a register or registers from the VxWorks target.
+   REGNO is the register to read, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_read_register (regno)
+     int regno;
+{
+  char i960_greg_packet[I960_GREG_PLEN];
+  char i960_fpreg_packet[I960_FPREG_PLEN];
+
+  /* Get general-purpose registers.  When copying values into
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  net_read_registers (i960_greg_packet, I960_GREG_PLEN, PTRACE_GETREGS);
+
+  bcopy (&i960_greg_packet[I960_R_R0],
+	 &registers[REGISTER_BYTE (R0_REGNUM)], 16 * I960_GREG_SIZE);
+  bcopy (&i960_greg_packet[I960_R_G0],
+	 &registers[REGISTER_BYTE (G0_REGNUM)], 16 * I960_GREG_SIZE);
+  bcopy (&i960_greg_packet[I960_R_PCW],
+	 &registers[REGISTER_BYTE (PCW_REGNUM)], sizeof (int));
+  bcopy (&i960_greg_packet[I960_R_ACW],
+	 &registers[REGISTER_BYTE (ACW_REGNUM)], sizeof (int));
+  bcopy (&i960_greg_packet[I960_R_TCW],
+	 &registers[REGISTER_BYTE (TCW_REGNUM)], sizeof (int));
+
+  /* If the target has floating point registers, fetch them.
+     Otherwise, zero the floating point register values in
+     registers[] for good measure, even though we might not
+     need to.  */
+
+  if (target_has_fp)
+    {
+      net_read_registers (i960_fpreg_packet, I960_FPREG_PLEN,
+                          PTRACE_GETFPREGS);
+      bcopy (&i960_fpreg_packet[I960_R_FP0], 
+             &registers[REGISTER_BYTE (FP0_REGNUM)],
+  	     REGISTER_RAW_SIZE (FP0_REGNUM) * 4);
+    }
+  else
+    bzero (&registers[REGISTER_BYTE (FP0_REGNUM)],
+           REGISTER_RAW_SIZE (FP0_REGNUM) * 4);
+
+  /* Mark the register cache valid.  */
+
+  registers_fetched ();
+}
+
+/* Store a register or registers into the VxWorks target.
+   REGNO is the register to store, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_write_register (regno)
+     int regno;
+{
+  char i960_greg_packet[I960_GREG_PLEN];
+  char i960_fpreg_packet[I960_FPREG_PLEN];
+
+  /* Store floating-point registers.  When copying values from
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  bcopy (&registers[REGISTER_BYTE (R0_REGNUM)],
+	 &i960_greg_packet[I960_R_R0], 16 * I960_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (G0_REGNUM)],
+	 &i960_greg_packet[I960_R_G0], 16 * I960_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (PCW_REGNUM)],
+	 &i960_greg_packet[I960_R_PCW], sizeof (int));
+  bcopy (&registers[REGISTER_BYTE (ACW_REGNUM)],
+	 &i960_greg_packet[I960_R_ACW], sizeof (int));
+  bcopy (&registers[REGISTER_BYTE (TCW_REGNUM)],
+	 &i960_greg_packet[I960_R_TCW], sizeof (int));
+
+  net_write_registers (i960_greg_packet, I960_GREG_PLEN, PTRACE_SETREGS);
+
+  /* Store floating point registers if the target has them.  */
+
+  if (target_has_fp)
+    {
+      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], 
+	     &i960_fpreg_packet[I960_R_FP0],
+	     REGISTER_RAW_SIZE (FP0_REGNUM) * 4);
+
+      net_write_registers (i960_fpreg_packet, I960_FPREG_PLEN,
+                           PTRACE_SETFPREGS);
+    }
+}
+
diff --git a/gdb/remote-vxmips.c b/gdb/remote-vxmips.c
new file mode 100644
index 0000000..c65ac01
--- /dev/null
+++ b/gdb/remote-vxmips.c
@@ -0,0 +1,201 @@
+/* MIPS-dependent portions of the RPC protocol
+   used with a VxWorks target 
+
+Contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include "defs.h"
+
+#include "vx-share/regPacket.h"  
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "symfile.h"		/* for struct complaint */
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <rpc/rpc.h>
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+/* get rid of value.h if possible */
+#include <value.h>
+#include <symtab.h>
+
+/* Flag set if target has fpu */
+
+extern int target_has_fp;
+
+/* Generic register read/write routines in remote-vx.c.  */
+
+extern void net_read_registers ();
+extern void net_write_registers ();
+
+/* Read a register or registers from the VxWorks target.
+   REGNO is the register to read, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_read_register (regno)
+     int regno;
+{
+  char mips_greg_packet[MIPS_GREG_PLEN];
+  char mips_fpreg_packet[MIPS_FPREG_PLEN];
+
+  /* Get general-purpose registers.  */
+
+  net_read_registers (mips_greg_packet, MIPS_GREG_PLEN, PTRACE_GETREGS);
+
+  /* this code copies the registers obtained by RPC 
+     stored in a structure(s) like this :
+     
+    	Register(s)		Offset(s)
+   	gp 0-31			0x00
+   	hi			0x80
+   	lo			0x84
+   	sr			0x88
+   	pc			0x8c
+    
+     into a stucture like this:
+   	
+   	0x00	GP 0-31
+   	0x80   	SR
+   	0x84	LO
+   	0x88	HI
+   	0x8C	BAD    		--- Not available currently
+   	0x90	CAUSE    	--- Not available currently
+   	0x94	PC
+   	0x98	FP 0-31
+   	0x118	FCSR
+   	0x11C	FIR    		--- Not available currently
+   	0x120	FP	    	--- Not available currently
+   
+     structure is 0x124 (292) bytes in length */
+   
+  /* Copy the general registers.  */
+  
+  bcopy (&mips_greg_packet[MIPS_R_GP0], &registers[0], 32 * MIPS_GREG_SIZE);
+  
+  /* Copy SR, LO, HI, and PC.  */
+  
+  bcopy (&mips_greg_packet[MIPS_R_SR],
+         &registers[REGISTER_BYTE (PS_REGNUM)], MIPS_GREG_SIZE);
+  bcopy (&mips_greg_packet[MIPS_R_LO],
+         &registers[REGISTER_BYTE (LO_REGNUM)], MIPS_GREG_SIZE);
+  bcopy (&mips_greg_packet[MIPS_R_HI],
+         &registers[REGISTER_BYTE (HI_REGNUM)], MIPS_GREG_SIZE);
+  bcopy (&mips_greg_packet[MIPS_R_PC],
+         &registers[REGISTER_BYTE (PC_REGNUM)], MIPS_GREG_SIZE);
+  
+  /* If the target has floating point registers, fetch them.
+     Otherwise, zero the floating point register values in
+     registers[] for good measure, even though we might not
+     need to.  */
+    
+  if (target_has_fp)
+    {
+      net_read_registers (mips_fpreg_packet, MIPS_FPREG_PLEN,
+			  PTRACE_GETFPREGS);
+
+      /* Copy the floating point registers.  */
+
+      bcopy (&mips_fpreg_packet[MIPS_R_FP0], 
+	     &registers[REGISTER_BYTE (FP0_REGNUM)],
+	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
+
+      /* Copy the floating point control/status register (fpcsr).  */
+
+      bcopy (&mips_fpreg_packet[MIPS_R_FPCSR], 
+	     &registers[REGISTER_BYTE (FCRCS_REGNUM)],
+	     REGISTER_RAW_SIZE (FCRCS_REGNUM));
+    }	
+  else
+    {	
+      bzero ((char *) &registers[REGISTER_BYTE (FP0_REGNUM)],
+	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
+      bzero ((char *) &registers[REGISTER_BYTE (FCRCS_REGNUM)],
+	     REGISTER_RAW_SIZE (FCRCS_REGNUM));
+    }		
+
+  /* Mark the register cache valid.  */
+
+  registers_fetched ();
+}
+
+/* Store a register or registers into the VxWorks target.
+   REGNO is the register to store, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+vx_write_register (regno)
+     int regno;
+{
+  char mips_greg_packet[MIPS_GREG_PLEN];
+  char mips_fpreg_packet[MIPS_FPREG_PLEN];
+
+  /* Store general registers.  */
+
+  bcopy (&registers[0], &mips_greg_packet[MIPS_R_GP0], 32 * MIPS_GREG_SIZE);
+  
+  /* Copy SR, LO, HI, and PC.  */
+  
+  bcopy (&registers[REGISTER_BYTE (PS_REGNUM)],
+         &mips_greg_packet[MIPS_R_SR], MIPS_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (LO_REGNUM)],
+         &mips_greg_packet[MIPS_R_LO], MIPS_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (HI_REGNUM)],
+         &mips_greg_packet[MIPS_R_HI], MIPS_GREG_SIZE);
+  bcopy (&registers[REGISTER_BYTE (PC_REGNUM)],
+         &mips_greg_packet[MIPS_R_PC], MIPS_GREG_SIZE);
+  
+  net_write_registers (mips_greg_packet, MIPS_GREG_PLEN, PTRACE_SETREGS);
+
+  /* Store floating point registers if the target has them.  */
+
+  if (target_has_fp)
+    {
+      /* Copy the floating point data registers.  */
+
+      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	     &mips_fpreg_packet[MIPS_R_FP0], 
+	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
+
+      /* Copy the floating point control/status register (fpcsr).  */
+
+      bcopy (&registers[REGISTER_BYTE (FCRCS_REGNUM)],
+	     &mips_fpreg_packet[MIPS_R_FPCSR], 
+	     REGISTER_RAW_SIZE (FCRCS_REGNUM));
+
+      net_write_registers (mips_fpreg_packet, MIPS_FPREG_PLEN,
+			   PTRACE_SETFPREGS);
+    }
+}
diff --git a/gdb/remote-vxsparc.c b/gdb/remote-vxsparc.c
new file mode 100644
index 0000000..0682542
--- /dev/null
+++ b/gdb/remote-vxsparc.c
@@ -0,0 +1,196 @@
+/* sparc-dependent portions of the RPC protocol
+   used with a VxWorks target 
+
+Contributed by Wind River Systems.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include "defs.h"
+
+#include "vx-share/regPacket.h"  
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "symtab.h"
+#include "symfile.h"		/* for struct complaint */
+
+#include "gdb_string.h"
+#include <errno.h>
+#include <signal.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+
+#ifdef _AIX                     /* IBM claims "void *malloc()" not char * */
+#define malloc bogon_malloc
+#endif
+
+#include <rpc/rpc.h>
+#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
+#include <netdb.h>
+#include "vx-share/ptrace.h"
+#include "vx-share/xdr_ptrace.h"
+#include "vx-share/xdr_ld.h"
+#include "vx-share/xdr_rdb.h"
+#include "vx-share/dbgRpcLib.h"
+
+/* get rid of value.h if possible */
+#include <value.h>
+#include <symtab.h>
+
+/* Flag set if target has fpu */
+
+extern int target_has_fp;
+
+/* sparc floating point format descriptor, from "sparc-tdep.c."  */
+
+extern struct ext_format ext_format_sparc;
+
+/* Generic register read/write routines in remote-vx.c.  */
+
+extern void net_read_registers ();
+extern void net_write_registers ();
+
+/* Read a register or registers from the VxWorks target.
+   REGNO is the register to read, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_read_register (regno)
+     int regno;
+{
+  char sparc_greg_packet[SPARC_GREG_PLEN];
+  char sparc_fpreg_packet[SPARC_FPREG_PLEN];
+  CORE_ADDR sp;
+
+  /* Get general-purpose registers.  When copying values into
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  net_read_registers (sparc_greg_packet, SPARC_GREG_PLEN, PTRACE_GETREGS);
+
+  /* Now copy the register values into registers[].
+     Note that this code depends on the ordering of the REGNUMs
+     as defined in "tm-sparc.h".  */
+
+  bcopy (&sparc_greg_packet[SPARC_R_G0],
+	 &registers[REGISTER_BYTE (G0_REGNUM)], 32 * SPARC_GREG_SIZE);
+  bcopy (&sparc_greg_packet[SPARC_R_Y],
+	 &registers[REGISTER_BYTE (Y_REGNUM)], 6 * SPARC_GREG_SIZE);
+
+  /* Now write the local and in registers to the register window
+     spill area in the frame.  VxWorks does not do this for the
+     active frame automatically; it greatly simplifies debugging
+     (FRAME_FIND_SAVED_REGS, in particular, depends on this).  */
+
+  sp = extract_address (&registers[REGISTER_BYTE (SP_REGNUM)], 
+	REGISTER_RAW_SIZE (CORE_ADDR));
+  write_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)],
+		16 * REGISTER_RAW_SIZE (L0_REGNUM));
+
+  /* If the target has floating point registers, fetch them.
+     Otherwise, zero the floating point register values in
+     registers[] for good measure, even though we might not
+     need to.  */
+
+  if (target_has_fp)
+    {
+      net_read_registers (sparc_fpreg_packet, SPARC_FPREG_PLEN,
+                          PTRACE_GETFPREGS);
+      bcopy (&sparc_fpreg_packet[SPARC_R_FP0], 
+             &registers[REGISTER_BYTE (FP0_REGNUM)], 32 * SPARC_FPREG_SIZE);
+      bcopy (&sparc_fpreg_packet[SPARC_R_FSR],
+	     &registers[REGISTER_BYTE (FPS_REGNUM)], 1 * SPARC_FPREG_SIZE);
+    }
+  else
+    { 
+      bzero (&registers[REGISTER_BYTE (FP0_REGNUM)], 32 * SPARC_FPREG_SIZE);
+      bzero (&registers[REGISTER_BYTE (FPS_REGNUM)], 1 * SPARC_FPREG_SIZE);
+    }
+
+  /* Mark the register cache valid.  */
+
+  registers_fetched ();
+}
+
+/* Store a register or registers into the VxWorks target.
+   REGNO is the register to store, or -1 for all; currently,
+   it is ignored.  FIXME look at regno to improve efficiency.  */
+
+void
+vx_write_register (regno)
+     int regno;
+{
+  char sparc_greg_packet[SPARC_GREG_PLEN];
+  char sparc_fpreg_packet[SPARC_FPREG_PLEN];
+  int in_gp_regs;
+  int in_fp_regs;
+  CORE_ADDR sp;
+
+  /* Store general purpose registers.  When copying values from
+     registers [], don't assume that a location in registers []
+     is properly aligned for the target data type.  */
+
+  in_gp_regs = 1;
+  in_fp_regs = 1;
+  if (regno >= 0)
+    {
+      if ((G0_REGNUM <= regno && regno <= I7_REGNUM)
+          || (Y_REGNUM <= regno && regno <= NPC_REGNUM))
+	in_fp_regs = 0;
+      else
+	in_gp_regs = 0;
+    }
+  if (in_gp_regs)
+    {
+      bcopy (&registers[REGISTER_BYTE (G0_REGNUM)],
+	     &sparc_greg_packet[SPARC_R_G0], 32 * SPARC_GREG_SIZE);
+      bcopy (&registers[REGISTER_BYTE (Y_REGNUM)],
+	     &sparc_greg_packet[SPARC_R_Y], 6 * SPARC_GREG_SIZE);
+
+      net_write_registers (sparc_greg_packet, SPARC_GREG_PLEN, PTRACE_SETREGS);
+
+      /* If this is a local or in register, or we're storing all
+         registers, update the register window spill area.  */
+
+      if (regno < 0 || (L0_REGNUM <= regno && regno <= I7_REGNUM))
+        {
+  	  sp = extract_address (&registers[REGISTER_BYTE (SP_REGNUM)], 
+		REGISTER_RAW_SIZE (CORE_ADDR));
+	  write_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)],
+			16 * REGISTER_RAW_SIZE (L0_REGNUM));
+	}
+    }
+
+  /* Store floating point registers if the target has them.  */
+
+  if (in_fp_regs && target_has_fp)
+    {
+      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)], 
+	     &sparc_fpreg_packet[SPARC_R_FP0], 32 * SPARC_FPREG_SIZE);
+      bcopy (&registers[REGISTER_BYTE (FPS_REGNUM)], 
+	     &sparc_fpreg_packet[SPARC_R_FSR], 1 * SPARC_FPREG_SIZE);
+
+      net_write_registers (sparc_fpreg_packet, SPARC_FPREG_PLEN,
+                           PTRACE_SETFPREGS);
+    }
+}
diff --git a/gdb/remote.c b/gdb/remote.c
new file mode 100644
index 0000000..f5b6f7c
--- /dev/null
+++ b/gdb/remote.c
@@ -0,0 +1,3473 @@
+/* Remote target communications for serial-line targets in custom GDB protocol
+   Copyright 1988, 91, 92, 93, 94, 95, 96, 97, 1998 
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Remote communication protocol.
+
+   A debug packet whose contents are <data>
+   is encapsulated for transmission in the form:
+
+	$ <data> # CSUM1 CSUM2
+
+	<data> must be ASCII alphanumeric and cannot include characters
+	'$' or '#'.  If <data> starts with two characters followed by
+	':', then the existing stubs interpret this as a sequence number.
+
+	CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
+	checksum of <data>, the most significant nibble is sent first.
+	the hex digits 0-9,a-f are used.
+
+   Receiver responds with:
+
+	+	- if CSUM is correct and ready for next packet
+	-	- if CSUM is incorrect
+
+   <data> is as follows:
+   Most values are encoded in ascii hex digits.  Signal numbers are according
+   to the numbering in target.h.
+
+	Request		Packet
+
+	set thread	Hct...		Set thread for subsequent operations.
+					c = 'c' for thread used in step and 
+					continue; t... can be -1 for all
+					threads.
+					c = 'g' for thread used in other
+					operations.  If zero, pick a thread,
+					any thread.
+	reply		OK		for success
+			ENN		for an error.
+
+	read registers  g
+	reply		XX....X		Each byte of register data
+					is described by two hex digits.
+					Registers are in the internal order
+					for GDB, and the bytes in a register
+					are in the same order the machine uses.
+			or ENN		for an error.
+
+	write regs	GXX..XX		Each byte of register data
+					is described by two hex digits.
+	reply		OK		for success
+			ENN		for an error
+
+        write reg	Pn...=r...	Write register n... with value r...,
+					which contains two hex digits for each
+					byte in the register (target byte
+					order).
+	reply		OK		for success
+			ENN		for an error
+	(not supported by all stubs).
+
+	read mem	mAA..AA,LLLL	AA..AA is address, LLLL is length.
+	reply		XX..XX		XX..XX is mem contents
+					Can be fewer bytes than requested
+					if able to read only part of the data.
+			or ENN		NN is errno
+
+	write mem	MAA..AA,LLLL:XX..XX
+					AA..AA is address,
+					LLLL is number of bytes,
+					XX..XX is data
+	reply		OK		for success
+			ENN		for an error (this includes the case
+					where only part of the data was
+					written).
+
+        write mem       XAA..AA,LLLL:XX..XX
+         (binary)                       AA..AA is address,
+                                        LLLL is number of bytes,
+                                        XX..XX is binary data
+        reply           OK              for success
+                        ENN             for an error
+
+	continue	cAA..AA		AA..AA is address to resume
+					If AA..AA is omitted,
+					resume at same address.
+
+	step		sAA..AA		AA..AA is address to resume
+					If AA..AA is omitted,
+					resume at same address.
+
+	continue with	Csig;AA..AA	Continue with signal sig (hex signal
+	signal				number).  If ;AA..AA is omitted, 
+					resume at same address.
+
+	step with	Ssig;AA..AA	Like 'C' but step not continue.
+	signal
+
+	last signal     ?               Reply the current reason for stopping.
+                                        This is the same reply as is generated
+					for step or cont : SAA where AA is the
+					signal number.
+
+	detach          D               Reply OK.
+
+	There is no immediate reply to step or cont.
+	The reply comes when the machine stops.
+	It is		SAA		AA is the signal number.
+
+	or...		TAAn...:r...;n...:r...;n...:r...;
+					AA = signal number
+					n... = register number (hex)
+					  r... = register contents
+					n... = `thread'
+					  r... = thread process ID.  This is
+						 a hex integer.
+					n... = other string not starting 
+					    with valid hex digit.
+					  gdb should ignore this n,r pair
+					  and go on to the next.  This way
+					  we can extend the protocol.
+	or...		WAA		The process exited, and AA is
+					the exit status.  This is only
+					applicable for certains sorts of
+					targets.
+	or...		XAA		The process terminated with signal
+					AA.
+        or...           OXX..XX	XX..XX  is hex encoding of ASCII data. This
+					can happen at any time while the 
+					program is running and the debugger 
+					should continue to wait for 
+					'W', 'T', etc.
+
+	thread alive	TXX		Find out if the thread XX is alive.
+	reply		OK		thread is still alive
+			ENN		thread is dead
+	
+	remote restart	RXX		Restart the remote server
+
+	extended ops 	!		Use the extended remote protocol.
+					Sticky -- only needs to be set once.
+
+	kill request	k
+
+	toggle debug	d		toggle debug flag (see 386 & 68k stubs)
+	reset		r		reset -- see sparc stub.
+	reserved	<other>		On other requests, the stub should
+					ignore the request and send an empty
+					response ($#<checksum>).  This way
+					we can extend the protocol and GDB
+					can tell whether the stub it is
+					talking to uses the old or the new.
+	search		tAA:PP,MM	Search backwards starting at address
+					AA for a match with pattern PP and
+					mask MM.  PP and MM are 4 bytes.
+					Not supported by all stubs.
+
+	general query	qXXXX		Request info about XXXX.
+	general set	QXXXX=yyyy	Set value of XXXX to yyyy.
+	query sect offs	qOffsets	Get section offsets.  Reply is
+					Text=xxx;Data=yyy;Bss=zzz
+
+	Responses can be run-length encoded to save space.  A '*' means that
+	the next character is an ASCII encoding giving a repeat count which
+	stands for that many repititions of the character preceding the '*'.
+	The encoding is n+29, yielding a printable character where n >=3 
+	(which is where rle starts to win).  Don't use an n > 126.
+
+	So 
+	"0* " means the same as "0000".  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <ctype.h>
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+/*#include "terminal.h"*/
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "gdbthread.h"
+
+#include "dcache.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+#include "serial.h"
+
+/* Prototypes for local functions */
+
+static int remote_write_bytes PARAMS ((CORE_ADDR memaddr,
+				       char *myaddr, int len));
+
+static int remote_read_bytes PARAMS ((CORE_ADDR memaddr,
+				      char *myaddr, int len));
+
+static void remote_files_info PARAMS ((struct target_ops *ignore));
+
+static int remote_xfer_memory PARAMS ((CORE_ADDR memaddr, char * myaddr,
+				       int len, int should_write,
+				       struct target_ops * target));
+
+static void remote_prepare_to_store PARAMS ((void));
+
+static void remote_fetch_registers PARAMS ((int regno));
+
+static void remote_resume PARAMS ((int pid, int step,
+				   enum target_signal siggnal));
+
+static int remote_start_remote PARAMS ((PTR));
+
+static void remote_open PARAMS ((char *name, int from_tty));
+
+static void extended_remote_open PARAMS ((char *name, int from_tty));
+
+static void remote_open_1 PARAMS ((char *, int, struct target_ops *,
+				   int extended_p));
+
+static void remote_close PARAMS ((int quitting));
+
+static void remote_store_registers PARAMS ((int regno));
+
+static void remote_mourn PARAMS ((void));
+
+static void extended_remote_restart PARAMS ((void));
+
+static void extended_remote_mourn PARAMS ((void));
+
+static void extended_remote_create_inferior PARAMS ((char *, char *, char **));
+
+static void remote_mourn_1 PARAMS ((struct target_ops *));
+
+static void remote_send PARAMS ((char *buf));
+
+static int readchar PARAMS ((int timeout));
+
+static int remote_wait PARAMS ((int pid, struct target_waitstatus * status));
+
+static void remote_kill PARAMS ((void));
+
+static int tohex PARAMS ((int nib));
+
+static void remote_detach PARAMS ((char *args, int from_tty));
+
+static void remote_interrupt PARAMS ((int signo));
+
+static void interrupt_query PARAMS ((void));
+
+static void set_thread PARAMS ((int, int));
+
+static int remote_thread_alive PARAMS ((int));
+
+static void get_offsets PARAMS ((void));
+
+static int read_frame PARAMS ((char *));
+
+static int remote_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int remote_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int hexnumlen PARAMS ((ULONGEST num));
+
+static void init_remote_ops PARAMS ((void));
+
+static void init_extended_remote_ops PARAMS ((void));
+
+static void remote_stop PARAMS ((void));
+
+static int ishex PARAMS ((int ch, int *val));
+
+static int stubhex PARAMS ((int ch));
+
+static int remote_query PARAMS ((int/*char*/, char *, char *, int *));
+
+static int hexnumstr PARAMS ((char *, ULONGEST));
+
+static CORE_ADDR remote_address_masked PARAMS ((CORE_ADDR));
+
+static void print_packet PARAMS ((char *));
+
+static unsigned long crc32 PARAMS ((unsigned char *, int, unsigned int));
+
+static void compare_sections_command PARAMS ((char *, int));
+
+static void packet_command PARAMS ((char *, int));
+
+static int stub_unpack_int PARAMS ((char *buff, int fieldlength));
+
+char *unpack_varlen_hex PARAMS ((char *buff, int *result));
+
+static char *unpack_nibble PARAMS ((char *buf, int *val));
+
+static char *pack_nibble PARAMS ((char *buf, int nibble));
+
+static char *pack_hex_byte PARAMS ((char *pkt, int/*unsigned char*/ byte));
+
+static char *unpack_byte PARAMS ((char *buf, int *value));
+
+static char *pack_int PARAMS ((char *buf, int value));
+
+static char *unpack_int PARAMS ((char *buf, int *value));
+
+static char *unpack_string PARAMS ((char *src, char *dest, int length));
+
+static char *pack_threadid PARAMS ((char *pkt, threadref *id));
+
+static char *unpack_threadid PARAMS ((char *inbuf, threadref *id));
+
+void int_to_threadref PARAMS ((threadref *id, int value));
+
+static int threadref_to_int PARAMS ((threadref *ref));
+
+static void copy_threadref PARAMS ((threadref *dest, threadref *src));
+
+static int threadmatch PARAMS ((threadref *dest, threadref *src));
+
+static char *pack_threadinfo_request PARAMS ((char *pkt, int mode,
+					      threadref *id));
+
+static int remote_unpack_thread_info_response PARAMS ((char *pkt,
+						       threadref *expectedref,
+						       struct gdb_ext_thread_info *info));
+
+
+static int remote_get_threadinfo PARAMS ((threadref *threadid,
+					  int fieldset,	/*TAG mask */
+					  struct gdb_ext_thread_info *info));
+
+static int adapt_remote_get_threadinfo PARAMS ((gdb_threadref *ref,
+						int selection,
+						struct gdb_ext_thread_info *info));
+
+static char *pack_threadlist_request PARAMS ((char *pkt, int startflag,
+					      int threadcount,
+					      threadref *nextthread));
+
+static int parse_threadlist_response PARAMS ((char *pkt,
+					      int result_limit,
+					      threadref *original_echo,
+					      threadref *resultlist,
+					      int *doneflag));
+
+static int remote_get_threadlist PARAMS ((int startflag,
+					  threadref *nextthread,
+					  int result_limit,
+					  int *done,
+					  int *result_count,
+					  threadref *threadlist));
+
+typedef int (*rmt_thread_action) (threadref *ref, void *context);
+
+static int remote_threadlist_iterator PARAMS ((rmt_thread_action stepfunction,
+					       void *context, int looplimit));
+
+static int remote_newthread_step PARAMS ((threadref *ref, void *context));
+
+static int remote_current_thread PARAMS ((int oldpid));
+
+int remote_find_new_threads PARAMS ((void));
+
+static void record_currthread PARAMS ((int currthread));
+
+static void init_remote_threads PARAMS ((void));
+
+/* exported functions */
+
+extern int fromhex PARAMS ((int a));
+
+extern void getpkt PARAMS ((char *buf, int forever));
+
+extern int putpkt PARAMS ((char *buf));
+
+static int putpkt_binary PARAMS ((char *buf, int cnt));
+
+void remote_console_output PARAMS ((char *));
+
+static void check_binary_download PARAMS ((CORE_ADDR addr));
+
+/* Define the target subroutine names */
+
+void open_remote_target PARAMS ((char *, int, struct target_ops *, int));
+
+void _initialize_remote PARAMS ((void));
+
+/* */
+
+static struct target_ops remote_ops;
+
+static struct target_ops extended_remote_ops;
+
+static struct target_thread_vector remote_thread_vec;
+
+/* This was 5 seconds, which is a long time to sit and wait.
+   Unless this is going though some terminal server or multiplexer or
+   other form of hairy serial connection, I would think 2 seconds would
+   be plenty.  */
+
+/* Changed to allow option to set timeout value.
+   was static int remote_timeout = 2; */
+extern int remote_timeout;
+
+/* This variable chooses whether to send a ^C or a break when the user
+   requests program interruption.  Although ^C is usually what remote
+   systems expect, and that is the default here, sometimes a break is
+   preferable instead.  */
+
+static int remote_break;
+
+/* Has the user attempted to interrupt the target? If so, then offer
+   the user the opportunity to bail out completely if he interrupts
+   again. */
+static int interrupted_already = 0;
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so that
+   remote_open knows that we don't have a file open when the program
+   starts.  */
+static serial_t remote_desc = NULL;
+
+/* This variable (available to the user via "set remotebinarydownload")
+   dictates whether downloads are sent in binary (via the 'X' packet).
+   We assume that the stub can, and attempt to do it. This will be cleared if
+   the stub does not understand it. This switch is still needed, though
+   in cases when the packet is supported in the stub, but the connection
+   does not allow it (i.e., 7-bit serial connection only). */
+static int remote_binary_download = 1;
+ 
+/* Have we already checked whether binary downloads work? */
+static int remote_binary_checked;
+
+/* Having this larger than 400 causes us to be incompatible with m68k-stub.c
+   and i386-stub.c.  Normally, no one would notice because it only matters
+   for writing large chunks of memory (e.g. in downloads).  Also, this needs
+   to be more than 400 if required to hold the registers (see below, where
+   we round it up based on REGISTER_BYTES).  */
+#define	PBUFSIZ	400
+
+/* Maximum number of bytes to read/write at once.  The value here
+   is chosen to fill up a packet (the headers account for the 32).  */
+#define MAXBUFBYTES ((PBUFSIZ-32)/2)
+
+/* Round up PBUFSIZ to hold all the registers, at least.  */
+/* The blank line after the #if seems to be required to work around a
+   bug in HP's PA compiler.  */
+#if REGISTER_BYTES > MAXBUFBYTES
+
+#undef PBUFSIZ
+#define	PBUFSIZ	(REGISTER_BYTES * 2 + 32)
+#endif
+
+
+/* This variable sets the number of bytes to be written to the target
+   in a single packet.  Normally PBUFSIZ is satisfactory, but some
+   targets need smaller values (perhaps because the receiving end
+   is slow).  */
+
+static int remote_write_size = PBUFSIZ;
+
+/* This variable sets the number of bits in an address that are to be
+   sent in a memory ("M" or "m") packet.  Normally, after stripping
+   leading zeros, the entire address would be sent. This variable
+   restricts the address to REMOTE_ADDRESS_SIZE bits.  HISTORY: The
+   initial implementation of remote.c restricted the address sent in
+   memory packets to ``host::sizeof long'' bytes - (typically 32
+   bits).  Consequently, for 64 bit targets, the upper 32 bits of an
+   address was never sent.  Since fixing this bug may cause a break in
+   some remote targets this variable is principly provided to
+   facilitate backward compatibility. */
+
+static int remote_address_size;
+
+/* This is the size (in chars) of the first response to the `g' command.  This
+   is used to limit the size of the memory read and write commands to prevent
+   stub buffers from overflowing.  The size does not include headers and
+   trailers, it is only the payload size. */
+
+static int remote_register_buf_size = 0;
+
+/* Should we try the 'P' request?  If this is set to one when the stub
+   doesn't support 'P', the only consequence is some unnecessary traffic.  */
+static int stub_supports_P = 1;
+
+/* These are pointers to hook functions that may be set in order to
+   modify resume/wait behavior for a particular architecture.  */
+
+void (*target_resume_hook) PARAMS ((void));
+void (*target_wait_loop_hook) PARAMS ((void));
+
+
+
+/* These are the threads which we last sent to the remote system.
+   -1 for all or -2 for not sent yet.  */
+static int general_thread;
+static int cont_thread;
+
+/* Call this function as a result of
+   1) A halt indication (T packet) containing a thread id
+   2) A direct query of currthread
+   3) Successful execution of set thread
+ */
+
+static void
+record_currthread (currthread)
+     int currthread;
+{
+#if 0	/* target_wait must not modify inferior_pid! */
+  inferior_pid = currthread;
+#endif
+  general_thread = currthread;
+#if 0	/* setting cont_thread has a different meaning 
+	   from having the target report its thread id.  */
+  cont_thread = currthread;
+#endif
+  /* If this is a new thread, add it to GDB's thread list.
+     If we leave it up to WFI to do this, bad things will happen.  */
+  if (!in_thread_list (currthread))
+    add_thread (currthread);
+}
+
+#define MAGIC_NULL_PID 42000
+
+static void
+set_thread (th, gen)
+     int th;
+     int gen;
+{
+  char buf[PBUFSIZ];
+  int state = gen ? general_thread : cont_thread;
+
+  if (state == th)
+    return;
+
+  buf[0] = 'H';
+  buf[1] = gen ? 'g' : 'c';
+  if (th == MAGIC_NULL_PID)
+    {
+      buf[2] = '0';
+      buf[3] = '\0';
+    }
+  else if (th < 0)
+    sprintf (&buf[2], "-%x", -th);
+  else
+    sprintf (&buf[2], "%x", th);
+  putpkt (buf);
+  getpkt (buf, 0);
+  if (gen)
+    general_thread = th;
+  else
+    cont_thread = th;
+}
+
+/*  Return nonzero if the thread TH is still alive on the remote system.  */
+
+static int
+remote_thread_alive (th)
+     int th;
+{
+  char buf[PBUFSIZ];
+
+  buf[0] = 'T';
+  if (th < 0)
+    sprintf (&buf[1], "-%08x", -th);
+  else
+    sprintf (&buf[1], "%08x", th);
+  putpkt (buf);
+  getpkt (buf, 0);
+  return (buf[0] == 'O' && buf[1] == 'K');
+}
+
+/* About these extended threadlist and threadinfo packets.  They are
+   variable length packets but, the fields within them are often fixed
+   length.  They are redundent enough to send over UDP as is the
+   remote protocol in general.  There is a matching unit test module
+   in libstub.  */
+
+#define BUF_THREAD_ID_SIZE (OPAQUETHREADBYTES*2)
+
+/* encode 64 bits in 16 chars of hex */
+
+static const char hexchars[] = "0123456789abcdef";
+
+static int
+ishex (ch, val)
+     int ch;
+     int *val;
+{
+  if ((ch >= 'a') && (ch <= 'f'))
+    {
+      *val = ch - 'a' + 10;
+      return 1;
+    }
+  if ((ch >= 'A') && (ch <= 'F'))
+    {
+      *val = ch - 'A' + 10;
+      return 1;
+    }
+  if ((ch >= '0') && (ch <= '9'))
+    {
+      *val = ch - '0';
+      return 1;
+    }
+  return 0;
+}
+
+static int
+stubhex (ch)
+     int ch;
+{
+  if (ch >= 'a' && ch <= 'f')
+    return ch - 'a' + 10;
+  if (ch >= '0' && ch <= '9')
+    return ch - '0';
+  if (ch >= 'A' && ch <= 'F')
+    return ch - 'A' + 10;
+  return -1;
+}
+
+static int
+stub_unpack_int (buff, fieldlength)
+     char *buff;
+     int fieldlength;
+{
+  int nibble;
+  int retval = 0;
+
+  while (fieldlength)
+    {
+      nibble = stubhex (*buff++);
+      retval |= nibble;
+      fieldlength--;
+      if (fieldlength)
+	retval = retval << 4;
+    }
+  return retval;
+}
+
+char *
+unpack_varlen_hex (buff, result)
+     char *buff;		/* packet to parse */
+     int *result;
+{
+  int nibble;
+  int retval = 0;
+
+  while (ishex (*buff, &nibble))
+    {
+      buff++;
+      retval = retval << 4;
+      retval |= nibble & 0x0f;
+    }
+  *result = retval;
+  return buff;
+}
+
+static char *
+unpack_nibble (buf, val)
+     char *buf;
+     int *val;
+{
+  ishex (*buf++, val);
+  return buf;
+}
+
+static char *
+pack_nibble (buf, nibble)
+     char *buf;
+     int nibble;
+{
+  *buf++ = hexchars[(nibble & 0x0f)];
+  return buf;
+}
+
+static char *
+pack_hex_byte (pkt, byte)
+     char *pkt;
+     int byte;
+{
+  *pkt++ = hexchars[(byte >> 4) & 0xf];
+  *pkt++ = hexchars[(byte & 0xf)];
+  return pkt;
+}
+
+static char *
+unpack_byte (buf, value)
+     char *buf;
+     int *value;
+{
+  *value = stub_unpack_int (buf, 2);
+  return buf + 2;
+}
+
+static char *
+pack_int (buf, value)
+     char *buf;
+     int value;
+{
+  buf = pack_hex_byte (buf, (value >> 24) & 0xff);
+  buf = pack_hex_byte (buf, (value >> 16) & 0xff);
+  buf = pack_hex_byte (buf, (value >> 8) & 0x0ff);
+  buf = pack_hex_byte (buf, (value & 0xff));
+  return buf;
+}
+
+static char *
+unpack_int (buf, value)
+     char *buf;
+     int *value;
+{
+  *value = stub_unpack_int (buf, 8);
+  return buf + 8;
+}
+
+#if 0 /* currently unused, uncomment when needed */
+static char *pack_string PARAMS ((char *pkt, char *string));
+
+static char *
+pack_string (pkt, string)
+     char *pkt;
+     char *string;
+{
+  char ch;
+  int len;
+
+  len = strlen (string);
+  if (len > 200)
+    len = 200;			/* Bigger than most GDB packets, junk??? */
+  pkt = pack_hex_byte (pkt, len);
+  while (len-- > 0)
+    {
+      ch = *string++;
+      if ((ch == '\0') || (ch == '#'))
+	ch = '*';		/* Protect encapsulation */
+      *pkt++ = ch;
+    }
+  return pkt;
+}
+#endif /* 0 (unused) */
+
+static char *
+unpack_string (src, dest, length)
+     char *src;
+     char *dest;
+     int length;
+{
+  while (length--)
+    *dest++ = *src++;
+  *dest = '\0';
+  return src;
+}
+
+static char *
+pack_threadid (pkt, id)
+     char *pkt;
+     threadref *id;
+{
+  char *limit;
+  unsigned char *altid;
+
+  altid = (unsigned char *) id;
+  limit = pkt + BUF_THREAD_ID_SIZE;
+  while (pkt < limit)
+    pkt = pack_hex_byte (pkt, *altid++);
+  return pkt;
+}
+
+
+static char *
+unpack_threadid (inbuf, id)
+     char *inbuf;
+     threadref *id;
+{
+  char *altref;
+  char *limit = inbuf + BUF_THREAD_ID_SIZE;
+  int x, y;
+
+  altref = (char *) id;
+
+  while (inbuf < limit)
+    {
+      x = stubhex (*inbuf++);
+      y = stubhex (*inbuf++);
+      *altref++ = (x << 4) | y;
+    }
+  return inbuf;
+}
+
+/* Externally, threadrefs are 64 bits but internally, they are still
+   ints. This is due to a mismatch of specifications.  We would like
+   to use 64bit thread references internally.  This is an adapter
+   function.  */
+
+void
+int_to_threadref (id, value)
+     threadref *id;
+     int value;
+{
+  unsigned char *scan;
+
+  scan = (unsigned char *) id;
+  {
+    int i = 4;
+    while (i--)
+      *scan++ = 0;
+  }
+  *scan++ = (value >> 24) & 0xff;
+  *scan++ = (value >> 16) & 0xff;
+  *scan++ = (value >> 8) & 0xff;
+  *scan++ = (value & 0xff);
+}
+
+static int
+threadref_to_int (ref)
+     threadref *ref;
+{
+  int i, value = 0;
+  unsigned char *scan;
+
+  scan = (char *) ref;
+  scan += 4;
+  i = 4;
+  while (i-- > 0)
+    value = (value << 8) | ((*scan++) & 0xff);
+  return value;
+}
+
+static void
+copy_threadref (dest, src)
+     threadref *dest;
+     threadref *src;
+{
+  int i;
+  unsigned char *csrc, *cdest;
+
+  csrc = (unsigned char *) src;
+  cdest = (unsigned char *) dest;
+  i = 8;
+  while (i--)
+    *cdest++ = *csrc++;
+}
+
+static int
+threadmatch (dest, src)
+     threadref *dest;
+     threadref *src;
+{
+  /* things are broken right now, so just assume we got a match */
+#if 0
+  unsigned char *srcp, *destp;
+  int i, result;
+  srcp = (char *) src;
+  destp = (char *) dest;
+
+  result = 1;
+  while (i-- > 0)
+    result &= (*srcp++ == *destp++) ? 1 : 0;
+  return result;
+#endif
+  return 1;
+}
+
+/*
+  threadid:1,        # always request threadid
+  context_exists:2,
+  display:4,
+  unique_name:8,
+  more_display:16
+*/
+
+/* Encoding:  'Q':8,'P':8,mask:32,threadid:64 */
+
+static char *
+pack_threadinfo_request (pkt, mode, id)
+     char *pkt;
+     int mode;
+     threadref *id;
+{
+  *pkt++ = 'q';			/* Info Query */
+  *pkt++ = 'P';			/* process or thread info */
+  pkt = pack_int (pkt, mode);	/* mode */
+  pkt = pack_threadid (pkt, id);	/* threadid */
+  *pkt = '\0';			/* terminate */
+  return pkt;
+}
+
+/* These values tag the fields in a thread info response packet */
+/* Tagging the fields allows us to request specific fields and to
+   add more fields as time goes by */
+
+#define TAG_THREADID 1      /* Echo the thread identifier */
+#define TAG_EXISTS 2        /* Is this process defined enough to
+			       fetch registers and its stack */
+#define TAG_DISPLAY 4       /* A short thing maybe to put on a window */
+#define TAG_THREADNAME 8    /* string, maps 1-to-1 with a thread is */
+#define TAG_MOREDISPLAY 16  /* Whatever the kernel wants to say about 
+			       the process*/
+
+static int
+remote_unpack_thread_info_response (pkt, expectedref, info)
+     char *pkt;
+     threadref *expectedref;
+     struct gdb_ext_thread_info *info;
+{
+  int mask, length;
+  unsigned int tag;
+  threadref ref;
+  char *limit = pkt + PBUFSIZ;  /* plausable parsing limit */
+  int retval = 1;
+
+  /* info->threadid = 0; FIXME: implement zero_threadref */
+  info->active = 0;
+  info->display[0] = '\0';
+  info->shortname[0] = '\0';
+  info->more_display[0] = '\0';
+
+  /* Assume the characters indicating the packet type have been stripped */
+  pkt = unpack_int (pkt, &mask);	/* arg mask */
+  pkt = unpack_threadid (pkt, &ref);
+
+  if (mask == 0)
+    warning ("Incomplete response to threadinfo request\n");
+  if (!threadmatch (&ref, expectedref))
+    {				/* This is an answer to a different request */
+      warning ("ERROR RMT Thread info mismatch\n");
+      return 0;
+    }
+  copy_threadref (&info->threadid, &ref);
+
+  /* Loop on tagged fields , try to bail if somthing goes wrong */
+
+  while ((pkt < limit) && mask && *pkt)	/* packets are terminated with nulls */
+    {
+      pkt = unpack_int (pkt, &tag);	/* tag */
+      pkt = unpack_byte (pkt, &length);		/* length */
+      if (!(tag & mask))	/* tags out of synch with mask */
+	{
+	  warning ("ERROR RMT: threadinfo tag mismatch\n");
+	  retval = 0;
+	  break;
+	}
+      if (tag == TAG_THREADID)
+	{
+	  if (length != 16)
+	    {
+	      warning ("ERROR RMT: length of threadid is not 16\n");
+	      retval = 0;
+	      break;
+	    }
+	  pkt = unpack_threadid (pkt, &ref);
+	  mask = mask & ~TAG_THREADID;
+	  continue;
+	}
+      if (tag == TAG_EXISTS)
+	{
+	  info->active = stub_unpack_int (pkt, length);
+	  pkt += length;
+	  mask = mask & ~(TAG_EXISTS);
+	  if (length > 8)
+	    {
+	      warning ("ERROR RMT: 'exists' length too long\n");
+	      retval = 0;
+	      break;
+	    }
+	  continue;
+	}
+      if (tag == TAG_THREADNAME)
+	{
+	  pkt = unpack_string (pkt, &info->shortname[0], length);
+	  mask = mask & ~TAG_THREADNAME;
+	  continue;
+	}
+      if (tag == TAG_DISPLAY)
+	{
+	  pkt = unpack_string (pkt, &info->display[0], length);
+	  mask = mask & ~TAG_DISPLAY;
+	  continue;
+	}
+      if (tag == TAG_MOREDISPLAY)
+	{
+	  pkt = unpack_string (pkt, &info->more_display[0], length);
+	  mask = mask & ~TAG_MOREDISPLAY;
+	  continue;
+	}
+      warning ("ERROR RMT: unknown thread info tag\n");
+      break;			/* Not a tag we know about */
+    }
+  return retval;
+}
+
+static int
+remote_get_threadinfo (threadid, fieldset, info)
+     threadref *threadid;
+     int fieldset;		/* TAG mask */
+     struct gdb_ext_thread_info *info;
+{
+  int result;
+  char threadinfo_pkt[PBUFSIZ];
+
+  pack_threadinfo_request (threadinfo_pkt, fieldset, threadid);
+  putpkt (threadinfo_pkt);
+  getpkt (threadinfo_pkt, 0);
+  result = remote_unpack_thread_info_response (threadinfo_pkt + 2, threadid,
+					       info);
+  return result;
+}
+
+/* Unfortunately, 61 bit thread-ids are bigger than the internal
+   representation of a threadid.  */
+
+static int
+adapt_remote_get_threadinfo (ref, selection, info)
+     gdb_threadref *ref;
+     int selection;
+     struct gdb_ext_thread_info *info;
+{
+  threadref lclref;
+
+  int_to_threadref (&lclref, *ref);
+  return remote_get_threadinfo (&lclref, selection, info);
+}
+
+/*    Format: i'Q':8,i"L":8,initflag:8,batchsize:16,lastthreadid:32   */
+
+static char *
+pack_threadlist_request (pkt, startflag, threadcount, nextthread)
+     char *pkt;
+     int startflag;
+     int threadcount;
+     threadref *nextthread;
+{
+  *pkt++ = 'q';			/* info query packet */
+  *pkt++ = 'L';			/* Process LIST or threadLIST request */
+  pkt = pack_nibble (pkt, startflag);	/* initflag 1 bytes */
+  pkt = pack_hex_byte (pkt, threadcount);	/* threadcount 2 bytes */
+  pkt = pack_threadid (pkt, nextthread);	/* 64 bit thread identifier */
+  *pkt = '\0';
+  return pkt;
+}
+
+/* Encoding:   'q':8,'M':8,count:16,done:8,argthreadid:64,(threadid:64)* */
+
+static int
+parse_threadlist_response (pkt, result_limit, original_echo, resultlist,
+			   doneflag)
+     char *pkt;
+     int result_limit;
+     threadref *original_echo;
+     threadref *resultlist;
+     int *doneflag;
+{
+  char *limit;
+  int count, resultcount, done;
+
+  resultcount = 0;
+  /* Assume the 'q' and 'M chars have been stripped.  */
+  limit = pkt + (PBUFSIZ - BUF_THREAD_ID_SIZE);	/* done parse past here */
+  pkt = unpack_byte (pkt, &count);	/* count field */
+  pkt = unpack_nibble (pkt, &done);
+  /* The first threadid is the argument threadid.  */
+  pkt = unpack_threadid (pkt, original_echo);	/* should match query packet */
+  while ((count-- > 0) && (pkt < limit))
+    {
+      pkt = unpack_threadid (pkt, resultlist++);
+      if (resultcount++ >= result_limit)
+	break;
+    }
+  if (doneflag)
+    *doneflag = done;
+  return resultcount;
+}
+
+static int
+remote_get_threadlist (startflag, nextthread, result_limit,
+		       done, result_count, threadlist)
+     int startflag;
+     threadref *nextthread;
+     int result_limit;
+     int *done;
+     int *result_count;
+     threadref *threadlist;
+
+{
+  static threadref echo_nextthread;
+  char threadlist_packet[PBUFSIZ];
+  char t_response[PBUFSIZ];
+  int result = 1;
+
+  /* Trancate result limit to be smaller than the packet size */
+  if ((((result_limit + 1) * BUF_THREAD_ID_SIZE) + 10) >= PBUFSIZ)
+    result_limit = (PBUFSIZ / BUF_THREAD_ID_SIZE) - 2;
+
+  pack_threadlist_request (threadlist_packet,
+			   startflag, result_limit, nextthread);
+  putpkt (threadlist_packet);
+  getpkt (t_response, 0);
+
+  *result_count =
+    parse_threadlist_response (t_response + 2, result_limit, &echo_nextthread,
+			       threadlist, done);
+
+  if (!threadmatch (&echo_nextthread, nextthread))
+    {
+      /* FIXME: This is a good reason to drop the packet */
+      /* Possably, there is a duplicate response */
+      /* Possabilities :
+         retransmit immediatly - race conditions
+         retransmit after timeout - yes
+         exit
+         wait for packet, then exit
+       */
+      warning ("HMM: threadlist did not echo arg thread, dropping it\n");
+      return 0;			/* I choose simply exiting */
+    }
+  if (*result_count <= 0)
+    {
+      if (*done != 1)
+	{
+	  warning ("RMT ERROR : failed to get remote thread list\n");
+	  result = 0;
+	}
+      return result;		/* break; */
+    }
+  if (*result_count > result_limit)
+    {
+      *result_count = 0;
+      warning ("RMT ERROR: threadlist response longer than requested\n");
+      return 0;
+    }
+  return result;
+}
+
+/* This is the interface between remote and threads, remotes upper interface */
+
+/* remote_find_new_threads retrieves the thread list and for each
+   thread in the list, looks up the thread in GDB's internal list,
+   ading the thread if it does not already exist.  This involves
+   getting partial thread lists from the remote target so, polling the
+   quit_flag is required.  */
+
+
+/* About this many threadisds fit in a packet. */
+
+#define MAXTHREADLISTRESULTS 32
+
+static int
+remote_threadlist_iterator (stepfunction, context, looplimit)
+     rmt_thread_action stepfunction;
+     void *context;
+     int looplimit;
+{
+  int done, i, result_count;
+  int startflag = 1;
+  int result = 1;
+  int loopcount = 0;
+  static threadref nextthread;
+  static threadref resultthreadlist[MAXTHREADLISTRESULTS];
+
+  done = 0;
+  while (!done)
+    {
+      if (loopcount++ > looplimit)
+	{
+	  result = 0;
+	  warning ("Remote fetch threadlist -infinite loop-\n");
+	  break;
+	}
+      if (!remote_get_threadlist (startflag, &nextthread, MAXTHREADLISTRESULTS,
+				  &done, &result_count, resultthreadlist))
+	{
+	  result = 0;
+	  break;
+	}
+      /* clear for later iterations */
+      startflag = 0;
+      /* Setup to resume next batch of thread references, set nextthread.  */
+      if (result_count >= 1)
+	copy_threadref (&nextthread, &resultthreadlist[result_count - 1]);
+      i = 0;
+      while (result_count--)
+	if (!(result = (*stepfunction) (&resultthreadlist[i++], context)))
+	  break;
+    }
+  return result;
+}
+
+static int
+remote_newthread_step (ref, context)
+     threadref *ref;
+     void *context;
+{
+  int pid;
+
+  pid = threadref_to_int (ref);
+  if (!in_thread_list (pid))
+    add_thread (pid);
+  return 1;			/* continue iterator */
+}
+
+#define CRAZY_MAX_THREADS 1000
+
+static int
+remote_current_thread (oldpid)
+     int oldpid;
+{
+  char buf[PBUFSIZ];
+
+  putpkt ("qC");
+  getpkt (buf, 0);
+  if (buf[0] == 'Q' && buf[1] == 'C')
+    return strtol (&buf[2], NULL, 16);
+  else
+    return oldpid;
+}
+
+int
+remote_find_new_threads ()
+{
+  int ret;
+
+  ret = remote_threadlist_iterator (remote_newthread_step, 0, 
+				    CRAZY_MAX_THREADS);
+  if (inferior_pid == MAGIC_NULL_PID)	/* ack ack ack */
+    inferior_pid = remote_current_thread (inferior_pid);
+  return ret;
+}
+
+/* Initialize the thread vector which is used by threads.c */
+/* The thread stub is a package, it has an initializer */
+
+static void
+init_remote_threads ()
+{
+  remote_thread_vec.find_new_threads = remote_find_new_threads;
+  remote_thread_vec.get_thread_info = adapt_remote_get_threadinfo;
+}
+
+
+/*  Restart the remote side; this is an extended protocol operation.  */
+
+static void
+extended_remote_restart ()
+{
+  char buf[PBUFSIZ];
+
+  /* Send the restart command; for reasons I don't understand the
+     remote side really expects a number after the "R".  */
+  buf[0] = 'R';
+  sprintf (&buf[1], "%x", 0);
+  putpkt (buf);
+
+  /* Now query for status so this looks just like we restarted
+     gdbserver from scratch.  */
+  putpkt ("?");
+  getpkt (buf, 0);
+}
+
+/* Clean up connection to a remote debugger.  */
+
+/* ARGSUSED */
+static void
+remote_close (quitting)
+     int quitting;
+{
+  if (remote_desc)
+    SERIAL_CLOSE (remote_desc);
+  remote_desc = NULL;
+}
+
+/* Query the remote side for the text, data and bss offsets. */
+
+static void
+get_offsets ()
+{
+  char buf[PBUFSIZ], *ptr;
+  int lose;
+  CORE_ADDR text_addr, data_addr, bss_addr;
+  struct section_offsets *offs;
+
+  putpkt ("qOffsets");
+
+  getpkt (buf, 0);
+
+  if (buf[0] == '\000')
+    return;			/* Return silently.  Stub doesn't support
+				   this command. */
+  if (buf[0] == 'E')
+    {
+      warning ("Remote failure reply: %s", buf);
+      return;
+    }
+
+  /* Pick up each field in turn.  This used to be done with scanf, but
+     scanf will make trouble if CORE_ADDR size doesn't match
+     conversion directives correctly.  The following code will work
+     with any size of CORE_ADDR.  */
+  text_addr = data_addr = bss_addr = 0;
+  ptr = buf;
+  lose = 0;
+
+  if (strncmp (ptr, "Text=", 5) == 0)
+    {
+      ptr += 5;
+      /* Don't use strtol, could lose on big values.  */
+      while (*ptr && *ptr != ';')
+	text_addr = (text_addr << 4) + fromhex (*ptr++);
+    }
+  else
+    lose = 1;
+
+  if (!lose && strncmp (ptr, ";Data=", 6) == 0)
+    {
+      ptr += 6;
+      while (*ptr && *ptr != ';')
+	data_addr = (data_addr << 4) + fromhex (*ptr++);
+    }
+  else
+    lose = 1;
+
+  if (!lose && strncmp (ptr, ";Bss=", 5) == 0)
+    {
+      ptr += 5;
+      while (*ptr && *ptr != ';')
+	bss_addr = (bss_addr << 4) + fromhex (*ptr++);
+    }
+  else
+    lose = 1;
+
+  if (lose)
+    error ("Malformed response to offset query, %s", buf);
+
+  if (symfile_objfile == NULL)
+    return;
+
+  offs = (struct section_offsets *) alloca (sizeof (struct section_offsets)
+					    + symfile_objfile->num_sections
+					    * sizeof (offs->offsets));
+  memcpy (offs, symfile_objfile->section_offsets,
+	  sizeof (struct section_offsets)
+	  + symfile_objfile->num_sections
+	  * sizeof (offs->offsets));
+
+  ANOFFSET (offs, SECT_OFF_TEXT) = text_addr;
+
+  /* This is a temporary kludge to force data and bss to use the same offsets
+     because that's what nlmconv does now.  The real solution requires changes
+     to the stub and remote.c that I don't have time to do right now.  */
+
+  ANOFFSET (offs, SECT_OFF_DATA) = data_addr;
+  ANOFFSET (offs, SECT_OFF_BSS) = data_addr;
+
+  objfile_relocate (symfile_objfile, offs);
+}
+
+/* Stub for catch_errors.  */
+
+static int
+remote_start_remote (dummy)
+     PTR dummy;
+{
+  immediate_quit = 1;		/* Allow user to interrupt it */
+
+  /* Ack any packet which the remote side has already sent.  */
+  SERIAL_WRITE (remote_desc, "+", 1);
+
+  /* Let the stub know that we want it to return the thread.  */
+  set_thread (-1, 0);
+
+  inferior_pid = remote_current_thread (inferior_pid);
+
+  get_offsets ();		/* Get text, data & bss offsets */
+
+  putpkt ("?");			/* initiate a query from remote machine */
+  immediate_quit = 0;
+
+  start_remote ();		/* Initialize gdb process mechanisms */
+  return 1;
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static void
+remote_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  remote_open_1 (name, from_tty, &remote_ops, 0);
+}
+
+/* Open a connection to a remote debugger using the extended
+   remote gdb protocol.  NAME is the filename used for communication.  */
+
+static void
+extended_remote_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  remote_open_1 (name, from_tty, &extended_remote_ops, 1/*extended_p*/);
+}
+
+/* Generic code for opening a connection to a remote target.  */
+
+static DCACHE *remote_dcache;
+
+static void
+remote_open_1 (name, from_tty, target, extended_p)
+     char *name;
+     int from_tty;
+     struct target_ops *target;
+     int extended_p;
+{
+  if (name == 0)
+    error ("To open a remote debug connection, you need to specify what\n\
+serial device is attached to the remote system (e.g. /dev/ttya).");
+
+  target_preopen (from_tty);
+
+  unpush_target (target);
+
+  remote_dcache = dcache_init (remote_read_bytes, remote_write_bytes);
+
+  remote_desc = SERIAL_OPEN (name);
+  if (!remote_desc)
+    perror_with_name (name);
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (remote_desc, baud_rate))
+	{
+	  SERIAL_CLOSE (remote_desc);
+	  perror_with_name (name);
+	}
+    }
+
+
+  SERIAL_RAW (remote_desc);
+
+  /* If there is something sitting in the buffer we might take it as a
+     response to a command, which would be bad.  */
+  SERIAL_FLUSH_INPUT (remote_desc);
+
+  if (from_tty)
+    {
+      puts_filtered ("Remote debugging using ");
+      puts_filtered (name);
+      puts_filtered ("\n");
+    }
+  push_target (target);	/* Switch to using remote target now */
+
+  /* The target vector does not have the thread functions in it yet,
+     so we use this function to call back into the thread module and
+     register the thread vector and its contained functions. */
+  bind_target_thread_vector (&remote_thread_vec);
+
+  /* Start out by trying the 'P' request to set registers.  We set
+     this each time that we open a new target so that if the user
+     switches from one stub to another, we can (if the target is
+     closed and reopened) cope.  */
+  stub_supports_P = 1;
+
+  general_thread = -2;
+  cont_thread = -2;
+
+  /* Force remote_write_bytes to check whether target supports
+     binary downloading. */
+  remote_binary_checked = 0;
+
+  /* Without this, some commands which require an active target (such
+     as kill) won't work.  This variable serves (at least) double duty
+     as both the pid of the target process (if it has such), and as a
+     flag indicating that a target is active.  These functions should
+     be split out into seperate variables, especially since GDB will
+     someday have a notion of debugging several processes.  */
+
+  inferior_pid = MAGIC_NULL_PID;
+  /* Start the remote connection; if error (0), discard this target.
+     In particular, if the user quits, be sure to discard it
+     (we'd be in an inconsistent state otherwise).  */
+  if (!catch_errors (remote_start_remote, NULL, 
+		     "Couldn't establish connection to remote target\n", 
+		     RETURN_MASK_ALL))
+    {
+      pop_target ();
+      return;
+    }
+
+  if (extended_p)
+    {
+      /* tell the remote that we're using the extended protocol.  */
+      char buf[PBUFSIZ];
+      putpkt ("!");
+      getpkt (buf, 0);
+    }
+}
+
+/* This takes a program previously attached to and detaches it.  After
+   this is done, GDB can be used to debug some other program.  We
+   better not have left any breakpoints in the target program or it'll
+   die when it hits one.  */
+
+static void
+remote_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[PBUFSIZ];
+
+  if (args)
+    error ("Argument given to \"detach\" when remotely debugging.");
+
+  /* Tell the remote target to detach.  */
+  strcpy (buf, "D");
+  remote_send (buf);
+
+  pop_target ();
+  if (from_tty)
+    puts_filtered ("Ending remote debugging.\n");
+}
+
+/* Convert hex digit A to a number.  */
+
+int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    return a - '0';
+  else if (a >= 'a' && a <= 'f')
+    return a - 'a' + 10;
+  else if (a >= 'A' && a <= 'F')
+    return a - 'A' + 10;
+  else 
+    error ("Reply contains invalid hex digit %d", a);
+}
+
+/* Convert number NIB to a hex digit.  */
+
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    return '0'+nib;
+  else
+    return 'a'+nib-10;
+}
+
+/* Tell the remote machine to resume.  */
+
+static enum target_signal last_sent_signal = TARGET_SIGNAL_0;
+
+static int last_sent_step;
+
+static void
+remote_resume (pid, step, siggnal)
+     int pid, step;
+     enum target_signal siggnal;
+{
+  char buf[PBUFSIZ];
+
+  if (pid == -1)
+    set_thread (0, 0);		/* run any thread */
+  else
+    set_thread (pid, 0);	/* run this thread */
+
+  dcache_flush (remote_dcache);
+
+  last_sent_signal = siggnal;
+  last_sent_step = step;
+
+  /* A hook for when we need to do something at the last moment before
+     resumption.  */
+  if (target_resume_hook)
+    (*target_resume_hook) ();
+
+  if (siggnal != TARGET_SIGNAL_0)
+    {
+      buf[0] = step ? 'S' : 'C';
+      buf[1] = tohex (((int)siggnal >> 4) & 0xf);
+      buf[2] = tohex ((int)siggnal & 0xf);
+      buf[3] = '\0';
+    }
+  else
+    strcpy (buf, step ? "s": "c");
+
+  putpkt (buf);
+}
+
+/* Send ^C to target to halt it.  Target will respond, and send us a
+   packet.  */
+
+static void (*ofunc) PARAMS ((int));
+
+static void
+remote_interrupt (signo)
+     int signo;
+{
+  remote_stop ();
+  signal (signo, remote_interrupt);
+}
+  
+static void
+remote_stop ()
+{
+  if (!interrupted_already)
+    {
+      /* Send a break or a ^C, depending on user preference.  */
+      interrupted_already = 1;
+
+      if (remote_debug)
+        printf_unfiltered ("remote_stop called\n");
+
+      if (remote_break)
+        SERIAL_SEND_BREAK (remote_desc);
+      else
+        SERIAL_WRITE (remote_desc, "\003", 1);
+    }
+  else
+    {
+      signal (SIGINT, ofunc);
+      interrupt_query ();
+      signal (SIGINT, remote_interrupt);
+      interrupted_already = 0;
+    }
+}
+
+/* Ask the user what to do when an interrupt is received.  */
+
+static void
+interrupt_query ()
+{
+  target_terminal_ours ();
+
+  if (query ("Interrupted while waiting for the program.\n\
+Give up (and stop debugging it)? "))
+    {
+      target_mourn_inferior ();
+      return_to_top_level (RETURN_QUIT);
+    }
+
+  target_terminal_inferior ();
+}
+
+/* If nonzero, ignore the next kill.  */
+
+int kill_kludge;
+
+void
+remote_console_output (msg)
+     char *msg;
+{
+  char *p;
+
+  for (p = msg; *p; p +=2) 
+    {
+      char tb[2];
+      char c = fromhex (p[0]) * 16 + fromhex (p[1]);
+      tb[0] = c;
+      tb[1] = 0;
+      if (target_output_hook)
+	target_output_hook (tb);
+      else 
+	fputs_filtered (tb, gdb_stdout);
+    }
+}
+
+/* Wait until the remote machine stops, then return, storing status in
+   STATUS just as `wait' would.  Returns "pid" (though it's not clear
+   what, if anything, that means in the case of this target).  */
+
+static int
+remote_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  unsigned char buf[PBUFSIZ];
+  int thread_num = -1;
+
+  status->kind = TARGET_WAITKIND_EXITED;
+  status->value.integer = 0;
+
+  while (1)
+    {
+      unsigned char *p;
+
+      interrupted_already = 0;
+      ofunc = signal (SIGINT, remote_interrupt);
+      getpkt ((char *) buf, 1);
+      signal (SIGINT, ofunc);
+
+      /* This is a hook for when we need to do something (perhaps the
+	 collection of trace data) every time the target stops.  */
+      if (target_wait_loop_hook)
+	(*target_wait_loop_hook) ();
+
+      switch (buf[0])
+	{
+	case 'E':		/* Error of some sort */
+	  warning ("Remote failure reply: %s", buf);
+	  continue;
+	case 'T':		/* Status with PC, SP, FP, ... */
+	  {
+	    int i;
+	    long regno;
+	    char regs[MAX_REGISTER_RAW_SIZE];
+
+	    /* Expedited reply, containing Signal, {regno, reg} repeat */
+	    /*  format is:  'Tssn...:r...;n...:r...;n...:r...;#cc', where
+		ss = signal number
+		n... = register number
+		r... = register contents
+		*/
+	    p = &buf[3];	/* after Txx */
+
+	    while (*p)
+	      {
+		unsigned char *p1;
+		char *p_temp;
+
+		/* Read the register number */
+		regno = strtol ((const char *) p, &p_temp, 16);
+		p1 = (unsigned char *)p_temp;
+
+		if (p1 == p) /* No register number present here */
+		  {
+		    p1 = (unsigned char *) strchr ((const char *) p, ':');
+		    if (p1 == NULL)
+		      warning ("Malformed packet(a) (missing colon): %s\n\
+Packet: '%s'\n",
+			       p, buf);
+		    if (strncmp ((const char *) p, "thread", p1 - p) == 0)
+		      {
+			p_temp = unpack_varlen_hex (++p1, &thread_num);
+			record_currthread (thread_num);
+			p = (unsigned char *) p_temp;
+		      }
+		  }
+		else
+		  {
+		    p = p1;
+
+		    if (*p++ != ':')
+		      warning ("Malformed packet(b) (missing colon): %s\n\
+Packet: '%s'\n",
+			       p, buf);
+
+		    if (regno >= NUM_REGS)
+		      warning ("Remote sent bad register number %ld: %s\n\
+Packet: '%s'\n",
+			       regno, p, buf);
+
+		    for (i = 0; i < REGISTER_RAW_SIZE (regno); i++)
+		      {
+			if (p[0] == 0 || p[1] == 0)
+			  warning ("Remote reply is too short: %s", buf);
+			regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+			p += 2;
+		      }
+		    supply_register (regno, regs);
+		  }
+
+		if (*p++ != ';')
+		  {
+		    warning ("Remote register badly formatted: %s", buf);
+		    warning ("            here: %s",p);
+		  }
+	      }
+	  }
+	  /* fall through */
+	case 'S':		/* Old style status, just signal only */
+	  status->kind = TARGET_WAITKIND_STOPPED;
+	  status->value.sig = (enum target_signal)
+	    (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+
+	  goto got_status;
+	case 'W':		/* Target exited */
+	  {
+	    /* The remote process exited.  */
+	    status->kind = TARGET_WAITKIND_EXITED;
+	    status->value.integer = (fromhex (buf[1]) << 4) + fromhex (buf[2]);
+	    goto got_status;
+	  }
+	case 'X':
+	  status->kind = TARGET_WAITKIND_SIGNALLED;
+	  status->value.sig = (enum target_signal)
+	    (((fromhex (buf[1])) << 4) + (fromhex (buf[2])));
+	  kill_kludge = 1;
+
+	  goto got_status;
+	case 'O':		/* Console output */
+	  remote_console_output (buf + 1);
+	  continue;
+	case '\0':
+	  if (last_sent_signal != TARGET_SIGNAL_0)
+	    {
+	      /* Zero length reply means that we tried 'S' or 'C' and
+		 the remote system doesn't support it.  */
+	      target_terminal_ours_for_output ();
+	      printf_filtered
+		("Can't send signals to this remote system.  %s not sent.\n",
+		 target_signal_to_name (last_sent_signal));
+	      last_sent_signal = TARGET_SIGNAL_0;
+	      target_terminal_inferior ();
+
+	      strcpy ((char *) buf, last_sent_step ? "s" : "c");
+	      putpkt ((char *) buf);
+	      continue;
+	    }
+	  /* else fallthrough */
+	default:
+	  warning ("Invalid remote reply: %s", buf);
+	  continue;
+	}
+    }
+ got_status:
+  if (thread_num != -1)
+    {
+      /* Initial thread value can only be acquired via wait, so deal with
+	 this marker which is used before the first thread value is
+	 acquired.  */
+      if (inferior_pid == MAGIC_NULL_PID)
+	{
+	  inferior_pid = thread_num;
+	  if (!in_thread_list (inferior_pid))
+	    add_thread (inferior_pid);
+	}
+      return thread_num;
+    }
+  return inferior_pid;
+}
+
+/* Number of bytes of registers this stub implements.  */
+
+static int register_bytes_found;
+
+/* Read the remote registers into the block REGS.  */
+/* Currently we just read all the registers, so we don't use regno.  */
+
+/* ARGSUSED */
+static void
+remote_fetch_registers (regno)
+     int regno;
+{
+  char buf[PBUFSIZ];
+  int i;
+  char *p;
+  char regs[REGISTER_BYTES];
+
+  set_thread (inferior_pid, 1);
+
+  sprintf (buf, "g");
+  remote_send (buf);
+
+  if (remote_register_buf_size == 0)
+    remote_register_buf_size = strlen (buf);
+
+  /* Unimplemented registers read as all bits zero.  */
+  memset (regs, 0, REGISTER_BYTES);
+
+  /* We can get out of synch in various cases.  If the first character
+     in the buffer is not a hex character, assume that has happened
+     and try to fetch another packet to read.  */
+  while ((buf[0] < '0' || buf[0] > '9')
+	 && (buf[0] < 'a' || buf[0] > 'f')
+	 && buf[0] != 'x')	/* New: unavailable register value */
+    {
+      if (remote_debug)
+	printf_unfiltered ("Bad register packet; fetching a new packet\n");
+      getpkt (buf, 0);
+    }
+
+  /* Reply describes registers byte by byte, each byte encoded as two
+     hex characters.  Suck them all up, then supply them to the
+     register cacheing/storage mechanism.  */
+
+  p = buf;
+  for (i = 0; i < REGISTER_BYTES; i++)
+    {
+      if (p[0] == 0)
+	break;
+      if (p[1] == 0)
+	{
+	  warning ("Remote reply is of odd length: %s", buf);
+	  /* Don't change register_bytes_found in this case, and don't
+	     print a second warning.  */
+	  goto supply_them;
+	}
+      if (p[0] == 'x' && p[1] == 'x')
+	regs[i] = 0;	/* 'x' */
+      else
+	regs[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+      p += 2;
+    }
+
+  if (i != register_bytes_found)
+    {
+      register_bytes_found = i;
+#ifdef REGISTER_BYTES_OK
+      if (!REGISTER_BYTES_OK (i))
+	warning ("Remote reply is too short: %s", buf);
+#endif
+    }
+  
+  supply_them:
+  for (i = 0; i < NUM_REGS; i++)
+  {
+    supply_register (i, &regs[REGISTER_BYTE(i)]);
+    if (buf[REGISTER_BYTE(i) * 2] == 'x')
+      register_valid[i] = -1;	/* register value not available */
+  }
+}
+
+/* Prepare to store registers.  Since we may send them all (using a
+   'G' request), we have to read out the ones we don't want to change
+   first.  */
+
+static void 
+remote_prepare_to_store ()
+{
+  /* Make sure the entire registers array is valid.  */
+  read_register_bytes (0, (char *)NULL, REGISTER_BYTES);
+}
+
+/* Store register REGNO, or all registers if REGNO == -1, from the contents
+   of REGISTERS.  FIXME: ignores errors.  */
+
+static void
+remote_store_registers (regno)
+     int regno;
+{
+  char buf[PBUFSIZ];
+  int i;
+  char *p;
+
+  set_thread (inferior_pid, 1);
+
+  if (regno >= 0 && stub_supports_P)
+    {
+      /* Try storing a single register.  */
+      char *regp;
+
+      sprintf (buf, "P%x=", regno);
+      p = buf + strlen (buf);
+      regp = &registers[REGISTER_BYTE (regno)];
+      for (i = 0; i < REGISTER_RAW_SIZE (regno); ++i)
+	{
+	  *p++ = tohex ((regp[i] >> 4) & 0xf);
+	  *p++ = tohex (regp[i] & 0xf);
+	}
+      *p = '\0';
+      remote_send (buf);
+      if (buf[0] != '\0')
+	{
+	  /* The stub understands the 'P' request.  We are done.  */
+	  return;
+	}
+
+      /* The stub does not support the 'P' request.  Use 'G' instead,
+	 and don't try using 'P' in the future (it will just waste our
+	 time).  */
+      stub_supports_P = 0;
+    }
+
+  buf[0] = 'G';
+
+  /* Command describes registers byte by byte,
+     each byte encoded as two hex characters.  */
+
+  p = buf + 1;
+  /* remote_prepare_to_store insures that register_bytes_found gets set.  */
+  for (i = 0; i < register_bytes_found; i++)
+    {
+      *p++ = tohex ((registers[i] >> 4) & 0xf);
+      *p++ = tohex (registers[i] & 0xf);
+    }
+  *p = '\0';
+
+  remote_send (buf);
+}
+
+/* Use of the data cache *used* to be disabled because it loses for looking
+   at and changing hardware I/O ports and the like.  Accepting `volatile'
+   would perhaps be one way to fix it.  Another idea would be to use the
+   executable file for the text segment (for all SEC_CODE sections?
+   For all SEC_READONLY sections?).  This has problems if you want to
+   actually see what the memory contains (e.g. self-modifying code,
+   clobbered memory, user downloaded the wrong thing).  
+
+   Because it speeds so much up, it's now enabled, if you're playing
+   with registers you turn it of (set remotecache 0).  */
+
+/* Read a word from remote address ADDR and return it.
+   This goes through the data cache.  */
+
+#if 0	/* unused? */
+static int
+remote_fetch_word (addr)
+     CORE_ADDR addr;
+{
+  return dcache_fetch (remote_dcache, addr);
+}
+
+/* Write a word WORD into remote address ADDR.
+   This goes through the data cache.  */
+
+static void
+remote_store_word (addr, word)
+     CORE_ADDR addr;
+     int word;
+{
+  dcache_poke (remote_dcache, addr, word);
+}
+#endif	/* 0 (unused?) */
+
+
+
+/* Return the number of hex digits in num.  */
+
+static int
+hexnumlen (num)
+     ULONGEST num;
+{
+  int i;
+
+  for (i = 0; num != 0; i++)
+    num >>= 4;
+
+  return max (i, 1);
+}
+
+/* Set BUF to the hex digits representing NUM.  */
+
+static int
+hexnumstr (buf, num)
+     char *buf;
+     ULONGEST num;
+{
+  int i;
+  int len = hexnumlen (num);
+
+  buf[len] = '\0';
+
+  for (i = len - 1; i >= 0; i--)
+    {
+      buf[i] = "0123456789abcdef" [(num & 0xf)];
+      num >>= 4;
+    }
+
+  return len;
+}
+
+/* Mask all but the least significant REMOTE_ADDRESS_SIZE bits. */
+
+static CORE_ADDR
+remote_address_masked (addr)
+     CORE_ADDR addr;
+{
+  if (remote_address_size > 0
+      && remote_address_size < (sizeof (ULONGEST) * 8))
+    {
+      /* Only create a mask when that mask can safely be constructed
+         in a ULONGEST variable. */
+      ULONGEST mask = 1;
+      mask = (mask << remote_address_size) - 1;
+      addr &= mask;
+    }
+  return addr;
+}
+
+/* Determine whether the remote target supports binary downloading.
+   This is accomplished by sending a no-op memory write of zero length
+   to the target at the specified address. It does not suffice to send
+   the whole packet, since many stubs strip the eighth bit and subsequently
+   compute a wrong checksum, which causes real havoc with remote_write_bytes. */
+static void
+check_binary_download (addr)
+     CORE_ADDR addr;
+{
+  if (remote_binary_download && !remote_binary_checked)
+    {
+      char buf[PBUFSIZ], *p;
+      remote_binary_checked = 1;
+
+      p = buf;
+      *p++ = 'X';
+      p += hexnumstr (p, (ULONGEST) addr);
+      *p++ = ',';
+      p += hexnumstr (p, (ULONGEST) 0);
+      *p++ = ':';
+      *p = '\0';
+
+      putpkt_binary (buf, (int) (p - buf));
+      getpkt (buf, 0);
+
+      if (buf[0] == '\0')
+	remote_binary_download = 0;
+    }
+
+  if (remote_debug)
+    {
+      if (remote_binary_download)
+	printf_unfiltered ("binary downloading suppported by target\n");
+      else
+	printf_unfiltered ("binary downloading NOT suppported by target\n");
+    }
+}
+
+/* Write memory data directly to the remote machine.
+   This does not inform the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int
+remote_write_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int max_buf_size;		/* Max size of packet output buffer */
+  int origlen;
+
+  /* Verify that the target can support a binary download */
+  check_binary_download (memaddr);
+
+  /* Chop the transfer down if necessary */
+
+  max_buf_size = min (remote_write_size, PBUFSIZ);
+  if (remote_register_buf_size != 0)
+    max_buf_size = min (max_buf_size, remote_register_buf_size);
+
+  /* Subtract header overhead from max payload size - $M<memaddr>,<len>:#nn */
+  max_buf_size -= 2 + hexnumlen (memaddr + len - 1) + 1 + hexnumlen (len) + 4;
+
+  origlen = len;
+  while (len > 0)
+    {
+      unsigned char buf[PBUFSIZ];
+      unsigned char *p, *plen;
+      int todo;
+      int i;
+
+      /* construct "M"<memaddr>","<len>":" */
+      /* sprintf (buf, "M%lx,%x:", (unsigned long) memaddr, todo); */
+      memaddr = remote_address_masked (memaddr);
+      p = buf;
+      if (remote_binary_download)
+	{
+	  *p++ = 'X';
+	  todo = min (len, max_buf_size);
+	}
+      else
+	{
+	  *p++ = 'M';
+	  todo = min (len, max_buf_size / 2); /* num bytes that will fit */
+	}
+
+      p += hexnumstr (p, (ULONGEST) memaddr);
+      *p++ = ',';
+
+      plen = p;		/* remember where len field goes */
+      p += hexnumstr (p, (ULONGEST) todo);
+      *p++ = ':';
+      *p = '\0';
+
+      /* We send target system values byte by byte, in increasing byte
+	 addresses, each byte encoded as two hex characters (or one
+	 binary character).  */
+      if (remote_binary_download)
+	{
+          int escaped = 0;
+          for (i = 0; 
+	       (i < todo) && (i + escaped) < (max_buf_size - 2);
+	       i++) 
+            {
+              switch (myaddr[i] & 0xff)
+                {
+                case '$':
+                case '#':
+                case 0x7d:
+                  /* These must be escaped */
+                  escaped++;
+                  *p++ = 0x7d;
+                  *p++ = (myaddr[i] & 0xff) ^ 0x20;
+                  break;
+                default:
+                  *p++ = myaddr[i] & 0xff;
+                  break;
+                }
+            }
+
+	  if (i < todo)
+	    {
+	      /* Escape chars have filled up the buffer prematurely, 
+		 and we have actually sent fewer bytes than planned.
+		 Fix-up the length field of the packet.  */
+
+	      /* FIXME: will fail if new len is a shorter string than 
+		 old len.  */
+
+	      plen += hexnumstr (plen, (ULONGEST) i);
+	      *plen++ = ':';
+	    }
+	}
+      else
+	{
+	  for (i = 0; i < todo; i++)
+	    {
+	      *p++ = tohex ((myaddr[i] >> 4) & 0xf);
+	      *p++ = tohex (myaddr[i] & 0xf);
+	    }
+	  *p = '\0';
+	}
+
+      putpkt_binary (buf, (int) (p - buf));
+      getpkt (buf, 0);
+
+      if (buf[0] == 'E')
+	{
+	  /* There is no correspondance between what the remote protocol uses
+	     for errors and errno codes.  We would like a cleaner way of
+	     representing errors (big enough to include errno codes, bfd_error
+	     codes, and others).  But for now just return EIO.  */
+	  errno = EIO;
+	  return 0;
+	}
+
+      /* Increment by i, not by todo, in case escape chars 
+	 caused us to send fewer bytes than we'd planned.  */
+      myaddr  += i;
+      memaddr += i;
+      len     -= i;
+    }
+  return origlen;
+}
+
+/* Read memory data directly from the remote machine.
+   This does not use the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+
+   Returns number of bytes transferred, or 0 for error.  */
+
+static int
+remote_read_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int max_buf_size;		/* Max size of packet output buffer */
+  int origlen;
+
+  /* Chop the transfer down if necessary */
+
+  max_buf_size = min (remote_write_size, PBUFSIZ);
+  if (remote_register_buf_size != 0)
+    max_buf_size = min (max_buf_size, remote_register_buf_size);
+
+  origlen = len;
+  while (len > 0)
+    {
+      char buf[PBUFSIZ];
+      char *p;
+      int todo;
+      int i;
+
+      todo = min (len, max_buf_size / 2); /* num bytes that will fit */
+
+      /* construct "m"<memaddr>","<len>" */
+      /* sprintf (buf, "m%lx,%x", (unsigned long) memaddr, todo); */
+      memaddr = remote_address_masked (memaddr);
+      p = buf;
+      *p++ = 'm';
+      p += hexnumstr (p, (ULONGEST) memaddr);
+      *p++ = ',';
+      p += hexnumstr (p, (ULONGEST) todo);
+      *p = '\0';
+
+      putpkt (buf);
+      getpkt (buf, 0);
+
+      if (buf[0] == 'E')
+	{
+	  /* There is no correspondance between what the remote protocol uses
+	     for errors and errno codes.  We would like a cleaner way of
+	     representing errors (big enough to include errno codes, bfd_error
+	     codes, and others).  But for now just return EIO.  */
+	  errno = EIO;
+	  return 0;
+	}
+
+  /* Reply describes memory byte by byte,
+     each byte encoded as two hex characters.  */
+
+      p = buf;
+      for (i = 0; i < todo; i++)
+	{
+	  if (p[0] == 0 || p[1] == 0)
+	    /* Reply is short.  This means that we were able to read
+	       only part of what we wanted to.  */
+	    return i + (origlen - len);
+	  myaddr[i] = fromhex (p[0]) * 16 + fromhex (p[1]);
+	  p += 2;
+	}
+      myaddr += todo;
+      memaddr += todo;
+      len -= todo;
+    }
+  return origlen;
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR,
+   transferring to or from debugger address MYADDR.  Write to inferior
+   if SHOULD_WRITE is nonzero.  Returns length of data written or
+   read; 0 for error.  */
+
+/* ARGSUSED */
+static int
+remote_xfer_memory (memaddr, myaddr, len, should_write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int should_write;
+     struct target_ops *target;			/* ignored */
+{
+#ifdef REMOTE_TRANSLATE_XFER_ADDRESS
+  CORE_ADDR targaddr;
+  int targlen;
+  REMOTE_TRANSLATE_XFER_ADDRESS (memaddr, len, targaddr, targlen);
+  if (targlen == 0)
+    return 0;
+  memaddr = targaddr;
+  len = targlen;
+#endif
+
+  return dcache_xfer_memory (remote_dcache, memaddr, myaddr,
+			     len, should_write);
+}
+
+   
+#if 0
+/* Enable after 4.12.  */
+
+void
+remote_search (len, data, mask, startaddr, increment, lorange, hirange
+	       addr_found, data_found)
+     int len;
+     char *data;
+     char *mask;
+     CORE_ADDR startaddr;
+     int increment;
+     CORE_ADDR lorange;
+     CORE_ADDR hirange;
+     CORE_ADDR *addr_found;
+     char *data_found;
+{
+  if (increment == -4 && len == 4)
+    {
+      long mask_long, data_long;
+      long data_found_long;
+      CORE_ADDR addr_we_found;
+      char buf[PBUFSIZ];
+      long returned_long[2];
+      char *p;
+
+      mask_long = extract_unsigned_integer (mask, len);
+      data_long = extract_unsigned_integer (data, len);
+      sprintf (buf, "t%x:%x,%x", startaddr, data_long, mask_long);
+      putpkt (buf);
+      getpkt (buf, 0);
+      if (buf[0] == '\0')
+	{
+	  /* The stub doesn't support the 't' request.  We might want to
+	     remember this fact, but on the other hand the stub could be
+	     switched on us.  Maybe we should remember it only until
+	     the next "target remote".  */
+	  generic_search (len, data, mask, startaddr, increment, lorange,
+			  hirange, addr_found, data_found);
+	  return;
+	}
+
+      if (buf[0] == 'E')
+	/* There is no correspondance between what the remote protocol uses
+	   for errors and errno codes.  We would like a cleaner way of
+	   representing errors (big enough to include errno codes, bfd_error
+	   codes, and others).  But for now just use EIO.  */
+	memory_error (EIO, startaddr);
+      p = buf;
+      addr_we_found = 0;
+      while (*p != '\0' && *p != ',')
+	addr_we_found = (addr_we_found << 4) + fromhex (*p++);
+      if (*p == '\0')
+	error ("Protocol error: short return for search");
+
+      data_found_long = 0;
+      while (*p != '\0' && *p != ',')
+	data_found_long = (data_found_long << 4) + fromhex (*p++);
+      /* Ignore anything after this comma, for future extensions.  */
+
+      if (addr_we_found < lorange || addr_we_found >= hirange)
+	{
+	  *addr_found = 0;
+	  return;
+	}
+
+      *addr_found = addr_we_found;
+      *data_found = store_unsigned_integer (data_we_found, len);
+      return;
+    }
+  generic_search (len, data, mask, startaddr, increment, lorange,
+		  hirange, addr_found, data_found);
+}
+#endif /* 0 */
+
+static void
+remote_files_info (ignore)
+     struct target_ops *ignore;
+{
+  puts_filtered ("Debugging a target over a serial line.\n");
+}
+
+/* Stuff for dealing with the packets which are part of this protocol.
+   See comment at top of file for details.  */
+
+/* Read a single character from the remote end, masking it down to 7 bits. */
+
+static int
+readchar (timeout)
+     int timeout;
+{
+  int ch;
+
+  ch = SERIAL_READCHAR (remote_desc, timeout);
+
+  switch (ch)
+    {
+    case SERIAL_EOF:
+      error ("Remote connection closed");
+    case SERIAL_ERROR:
+      perror_with_name ("Remote communication error");
+    case SERIAL_TIMEOUT:
+      return ch;
+    default:
+      return ch & 0x7f;
+    }
+}
+
+/* Send the command in BUF to the remote machine, and read the reply
+   into BUF.  Report an error if we get an error reply.  */
+
+static void
+remote_send (buf)
+     char *buf;
+{
+  putpkt (buf);
+  getpkt (buf, 0);
+
+  if (buf[0] == 'E')
+    error ("Remote failure reply: %s", buf);
+}
+
+/* Display a null-terminated packet on stdout, for debugging, using C
+   string notation.  */
+
+static void
+print_packet (buf)
+     char *buf;
+{
+  puts_filtered ("\"");
+  while (*buf)
+    gdb_printchar (*buf++, gdb_stdout, '"');
+  puts_filtered ("\"");
+}
+
+int
+putpkt (buf)
+     char *buf;
+{
+  return putpkt_binary (buf, strlen (buf));
+}
+
+/* Send a packet to the remote machine, with error checking.  The data
+   of the packet is in BUF.  The string in BUF can be at most  PBUFSIZ - 5
+   to account for the $, # and checksum, and for a possible /0 if we are
+   debugging (remote_debug) and want to print the sent packet as a string */
+
+static int
+putpkt_binary (buf, cnt)
+     char *buf;
+     int cnt;
+{
+  int i;
+  unsigned char csum = 0;
+  char buf2[PBUFSIZ];
+  int ch;
+  int tcount = 0;
+  char *p;
+
+  /* Copy the packet into buffer BUF2, encapsulating it
+     and giving it a checksum.  */
+
+  if (cnt > (int) sizeof (buf2) - 5)		/* Prosanity check */
+    abort ();
+
+  p = buf2;
+  *p++ = '$';
+
+  for (i = 0; i < cnt; i++)
+    {
+      csum += buf[i];
+      *p++ = buf[i];
+    }
+  *p++ = '#';
+  *p++ = tohex ((csum >> 4) & 0xf);
+  *p++ = tohex (csum & 0xf);
+
+  /* Send it over and over until we get a positive ack.  */
+
+  while (1)
+    {
+      int started_error_output = 0;
+
+      if (remote_debug)
+	{
+	  *p = '\0';
+	  printf_unfiltered ("Sending packet: %s...", buf2);
+	  gdb_flush (gdb_stdout);
+	}
+      if (SERIAL_WRITE (remote_desc, buf2, p - buf2))
+	perror_with_name ("putpkt: write failed");
+
+      /* read until either a timeout occurs (-2) or '+' is read */
+      while (1)
+	{
+	  ch = readchar (remote_timeout);
+
+ 	  if (remote_debug)
+	    {
+	      switch (ch)
+		{
+		case '+':
+		case SERIAL_TIMEOUT:
+		case '$':
+		  if (started_error_output)
+		    {
+		      putchar_unfiltered ('\n');
+		      started_error_output = 0;
+		    }
+		}
+	    }
+
+	  switch (ch)
+	    {
+	    case '+':
+	      if (remote_debug)
+		printf_unfiltered ("Ack\n");
+	      return 1;
+	    case SERIAL_TIMEOUT:
+	      tcount ++;
+	      if (tcount > 3)
+		return 0;
+	      break;		/* Retransmit buffer */
+	    case '$':
+	      {
+		char junkbuf[PBUFSIZ];
+
+	      /* It's probably an old response, and we're out of sync.
+		 Just gobble up the packet and ignore it.  */
+		getpkt (junkbuf, 0);
+		continue;		/* Now, go look for + */
+	      }
+	    default:
+	      if (remote_debug)
+		{
+		  if (!started_error_output)
+		    {
+		      started_error_output = 1;
+		      printf_unfiltered ("putpkt: Junk: ");
+		    }
+		  putchar_unfiltered (ch & 0177);
+		}
+	      continue;
+	    }
+	  break;		/* Here to retransmit */
+	}
+
+#if 0
+      /* This is wrong.  If doing a long backtrace, the user should be
+	 able to get out next time we call QUIT, without anything as
+	 violent as interrupt_query.  If we want to provide a way out of
+	 here without getting to the next QUIT, it should be based on
+	 hitting ^C twice as in remote_wait.  */
+      if (quit_flag)
+	{
+	  quit_flag = 0;
+	  interrupt_query ();
+	}
+#endif
+    }
+}
+
+/* Come here after finding the start of the frame.  Collect the rest
+   into BUF, verifying the checksum, length, and handling run-length
+   compression.  Returns 0 on any error, 1 on success.  */
+
+static int
+read_frame (buf)
+     char *buf;
+{
+  unsigned char csum;
+  char *bp;
+  int c;
+
+  csum = 0;
+  bp = buf;
+
+  while (1)
+    {
+      c = readchar (remote_timeout);
+
+      switch (c)
+	{
+	case SERIAL_TIMEOUT:
+	  if (remote_debug)
+	    puts_filtered ("Timeout in mid-packet, retrying\n");
+	  return 0;
+	case '$':
+	  if (remote_debug)
+	    puts_filtered ("Saw new packet start in middle of old one\n");
+	  return 0;		/* Start a new packet, count retries */
+	case '#':
+	  {
+	    unsigned char pktcsum;
+
+	    *bp = '\000';
+
+	    pktcsum = fromhex (readchar (remote_timeout)) << 4;
+	    pktcsum |= fromhex (readchar (remote_timeout));
+
+	    if (csum == pktcsum)
+	      return 1;
+
+	    if (remote_debug) 
+	      {
+		printf_filtered ("Bad checksum, sentsum=0x%x, csum=0x%x, buf=",
+				 pktcsum, csum);
+		puts_filtered (buf);
+		puts_filtered ("\n");
+	      }
+	    return 0;
+	  }
+	case '*':		/* Run length encoding */
+	  csum += c;
+	  c = readchar (remote_timeout);
+	  csum += c;
+	  c = c - ' ' + 3;	/* Compute repeat count */
+
+
+	  if (c > 0 && c < 255 && bp + c - 1 < buf + PBUFSIZ - 1)
+	    {
+	      memset (bp, *(bp - 1), c);
+	      bp += c;
+	      continue;
+	    }
+
+	  *bp = '\0';
+	  printf_filtered ("Repeat count %d too large for buffer: ", c);
+	  puts_filtered (buf);
+	  puts_filtered ("\n");
+	  return 0;
+
+	default:
+	  if (bp < buf + PBUFSIZ - 1)
+	    {
+	      *bp++ = c;
+	      csum += c;
+	      continue;
+	    }
+
+	  *bp = '\0';
+	  puts_filtered ("Remote packet too long: ");
+	  puts_filtered (buf);
+	  puts_filtered ("\n");
+
+	  return 0;
+	}
+    }
+}
+
+/* Read a packet from the remote machine, with error checking, and
+   store it in BUF.  BUF is expected to be of size PBUFSIZ.  If
+   FOREVER, wait forever rather than timing out; this is used while
+   the target is executing user code.  */
+
+void
+getpkt (buf, forever)
+     char *buf;
+     int forever;
+{
+  int c;
+  int tries;
+  int timeout;
+  int val;
+
+  strcpy (buf,"timeout");
+
+  if (forever)
+    {
+#ifdef MAINTENANCE_CMDS
+      timeout = watchdog > 0 ? watchdog : -1;
+#else
+      timeout = -1;
+#endif
+    }
+
+  else
+    timeout = remote_timeout;
+
+#define MAX_TRIES 3
+
+  for (tries = 1; tries <= MAX_TRIES; tries++)
+    {
+      /* This can loop forever if the remote side sends us characters
+	 continuously, but if it pauses, we'll get a zero from readchar
+	 because of timeout.  Then we'll count that as a retry.  */
+
+      /* Note that we will only wait forever prior to the start of a packet.
+	 After that, we expect characters to arrive at a brisk pace.  They
+	 should show up within remote_timeout intervals.  */
+
+      do
+	{
+	  c = readchar (timeout);
+
+	  if (c == SERIAL_TIMEOUT)
+	    {
+#ifdef MAINTENANCE_CMDS
+	      if (forever)	/* Watchdog went off.  Kill the target. */
+		{
+		  target_mourn_inferior ();
+		  error ("Watchdog has expired.  Target detached.\n");
+		}
+#endif
+	      if (remote_debug)
+		puts_filtered ("Timed out.\n");
+	      goto retry;
+	    }
+	}
+      while (c != '$');
+
+      /* We've found the start of a packet, now collect the data.  */
+
+      val = read_frame (buf);
+
+      if (val == 1)
+	{
+	  if (remote_debug)
+	    fprintf_unfiltered (gdb_stdout, "Packet received: %s\n", buf);
+	  SERIAL_WRITE (remote_desc, "+", 1);
+	  return;
+	}
+
+      /* Try the whole thing again.  */
+    retry:
+      SERIAL_WRITE (remote_desc, "-", 1);
+    }
+
+  /* We have tried hard enough, and just can't receive the packet.  Give up. */
+
+  printf_unfiltered ("Ignoring packet error, continuing...\n");
+  SERIAL_WRITE (remote_desc, "+", 1);
+}
+
+static void
+remote_kill ()
+{
+  /* For some mysterious reason, wait_for_inferior calls kill instead of
+     mourn after it gets TARGET_WAITKIND_SIGNALLED.  Work around it.  */
+  if (kill_kludge)
+    {
+      kill_kludge = 0;
+      target_mourn_inferior ();
+      return;
+    }
+
+  /* Use catch_errors so the user can quit from gdb even when we aren't on
+     speaking terms with the remote system.  */
+  catch_errors ((catch_errors_ftype *) putpkt, "k", "", RETURN_MASK_ERROR);
+
+  /* Don't wait for it to die.  I'm not really sure it matters whether
+     we do or not.  For the existing stubs, kill is a noop.  */
+  target_mourn_inferior ();
+}
+
+static void
+remote_mourn ()
+{
+  remote_mourn_1 (&remote_ops);
+}
+
+static void
+extended_remote_mourn ()
+{
+  /* We do _not_ want to mourn the target like this; this will
+     remove the extended remote target  from the target stack,
+     and the next time the user says "run" it'll fail. 
+
+     FIXME: What is the right thing to do here?  */
+#if 0
+  remote_mourn_1 (&extended_remote_ops);
+#endif
+}
+
+/* Worker function for remote_mourn.  */
+static void
+remote_mourn_1 (target)
+     struct target_ops *target;
+{
+  unpush_target (target);
+  generic_mourn_inferior ();
+}
+
+/* In the extended protocol we want to be able to do things like
+   "run" and have them basically work as expected.  So we need
+   a special create_inferior function. 
+
+   FIXME: One day add support for changing the exec file
+   we're debugging, arguments and an environment.  */
+
+static void
+extended_remote_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  /* Rip out the breakpoints; we'll reinsert them after restarting
+     the remote server.  */
+  remove_breakpoints ();
+
+  /* Now restart the remote server.  */
+  extended_remote_restart ();
+
+  /* Now put the breakpoints back in.  This way we're safe if the
+     restart function works via a unix fork on the remote side.  */
+  insert_breakpoints ();
+
+  /* Clean up from the last time we were running.  */
+  clear_proceed_status ();
+
+  /* Let the remote process run.  */
+  proceed (-1, TARGET_SIGNAL_0, 0);
+}
+
+
+/* On some machines, e.g. 68k, we may use a different breakpoint instruction
+   than other targets; in those use REMOTE_BREAKPOINT instead of just
+   BREAKPOINT.  Also, bi-endian targets may define LITTLE_REMOTE_BREAKPOINT
+   and BIG_REMOTE_BREAKPOINT.  If none of these are defined, we just call
+   the standard routines that are in mem-break.c.  */
+
+/* FIXME, these ought to be done in a more dynamic fashion.  For instance,
+   the choice of breakpoint instruction affects target program design and
+   vice versa, and by making it user-tweakable, the special code here
+   goes away and we need fewer special GDB configurations.  */
+
+#if defined (LITTLE_REMOTE_BREAKPOINT) && defined (BIG_REMOTE_BREAKPOINT) && !defined(REMOTE_BREAKPOINT)
+#define REMOTE_BREAKPOINT
+#endif
+
+#ifdef REMOTE_BREAKPOINT
+
+/* If the target isn't bi-endian, just pretend it is.  */
+#if !defined (LITTLE_REMOTE_BREAKPOINT) && !defined (BIG_REMOTE_BREAKPOINT)
+#define LITTLE_REMOTE_BREAKPOINT REMOTE_BREAKPOINT
+#define BIG_REMOTE_BREAKPOINT REMOTE_BREAKPOINT
+#endif
+
+static unsigned char big_break_insn[] = BIG_REMOTE_BREAKPOINT;
+static unsigned char little_break_insn[] = LITTLE_REMOTE_BREAKPOINT;
+
+#endif /* REMOTE_BREAKPOINT */
+
+/* Insert a breakpoint on targets that don't have any better breakpoint
+   support.  We read the contents of the target location and stash it,
+   then overwrite it with a breakpoint instruction.  ADDR is the target
+   location in the target machine.  CONTENTS_CACHE is a pointer to 
+   memory allocated for saving the target contents.  It is guaranteed
+   by the caller to be long enough to save sizeof BREAKPOINT bytes (this
+   is accomplished via BREAKPOINT_MAX).  */
+
+static int
+remote_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+#ifdef REMOTE_BREAKPOINT
+  int val;
+
+  val = target_read_memory (addr, contents_cache, sizeof big_break_insn);
+
+  if (val == 0)
+    {
+      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	val = target_write_memory (addr, (char *) big_break_insn,
+				   sizeof big_break_insn);
+      else
+	val = target_write_memory (addr, (char *) little_break_insn,
+				   sizeof little_break_insn);
+    }
+
+  return val;
+#else
+  return memory_insert_breakpoint (addr, contents_cache);
+#endif /* REMOTE_BREAKPOINT */
+}
+
+static int
+remote_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+#ifdef REMOTE_BREAKPOINT
+  return target_write_memory (addr, contents_cache, sizeof big_break_insn);
+#else
+  return memory_remove_breakpoint (addr, contents_cache);
+#endif /* REMOTE_BREAKPOINT */
+}
+
+/* Some targets are only capable of doing downloads, and afterwards
+   they switch to the remote serial protocol.  This function provides
+   a clean way to get from the download target to the remote target.
+   It's basically just a wrapper so that we don't have to expose any
+   of the internal workings of remote.c.
+
+   Prior to calling this routine, you should shutdown the current
+   target code, else you will get the "A program is being debugged
+   already..." message.  Usually a call to pop_target() suffices.  */
+
+void
+push_remote_target (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  printf_filtered ("Switching to remote protocol\n");
+  remote_open (name, from_tty);
+}
+
+/* Other targets want to use the entire remote serial module but with
+   certain remote_ops overridden. */
+
+void
+open_remote_target (name, from_tty, target, extended_p)
+     char *name;
+     int from_tty;
+     struct target_ops *target;
+     int extended_p;
+{
+  printf_filtered ("Selecting the %sremote protocol\n",
+		   (extended_p ? "extended-" : ""));
+  remote_open_1 (name, from_tty, target, extended_p);
+}
+
+/* Table used by the crc32 function to calcuate the checksum. */
+
+static unsigned long crc32_table[256] = {0, 0};
+
+static unsigned long
+crc32 (buf, len, crc)
+     unsigned char *buf;
+     int len;
+     unsigned int crc;
+{
+  if (! crc32_table[1])
+    {
+      /* Initialize the CRC table and the decoding table. */
+      int i, j;
+      unsigned int c;
+
+      for (i = 0; i < 256; i++)
+        {
+          for (c = i << 24, j = 8; j > 0; --j)
+            c = c & 0x80000000 ? (c << 1) ^ 0x04c11db7 : (c << 1);
+          crc32_table[i] = c;
+        }
+    }
+
+  while (len--)
+    {
+      crc = (crc << 8) ^ crc32_table[((crc >> 24) ^ *buf) & 255];
+      buf++;
+    }
+  return crc;
+}
+
+/* compare-sections command
+
+   With no arguments, compares each loadable section in the exec bfd
+   with the same memory range on the target, and reports mismatches.
+   Useful for verifying the image on the target against the exec file.
+   Depends on the target understanding the new "qCRC:" request.  */
+
+static void
+compare_sections_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  asection *s;
+  unsigned long host_crc, target_crc;
+  extern bfd *exec_bfd;
+  struct cleanup *old_chain;
+  char *tmp, *sectdata, *sectname, buf[PBUFSIZ];
+  bfd_size_type size;
+  bfd_vma lma;
+  int matched = 0;
+  int mismatched = 0;
+
+  if (!exec_bfd)
+    error ("command cannot be used without an exec file");
+  if (!current_target.to_shortname ||
+      strcmp (current_target.to_shortname, "remote") != 0)
+    error ("command can only be used with remote target");
+
+  for (s = exec_bfd->sections; s; s = s->next) 
+    {
+      if (!(s->flags & SEC_LOAD))
+	continue;	/* skip non-loadable section */
+
+      size = bfd_get_section_size_before_reloc (s);
+      if (size == 0)
+	continue;	/* skip zero-length section */
+
+      sectname = (char *) bfd_get_section_name (exec_bfd, s);
+      if (args && strcmp (args, sectname) != 0)
+	continue;	/* not the section selected by user */
+
+      matched = 1;	/* do this section */
+      lma = s->lma;
+      /* FIXME: assumes lma can fit into long */
+      sprintf (buf, "qCRC:%lx,%lx", (long) lma, (long) size);
+      putpkt (buf);
+
+      /* be clever; compute the host_crc before waiting for target reply */
+      sectdata = xmalloc (size);
+      old_chain = make_cleanup (free, sectdata);
+      bfd_get_section_contents (exec_bfd, s, sectdata, 0, size);
+      host_crc = crc32 ((unsigned char *) sectdata, size, 0xffffffff);
+
+      getpkt (buf, 0);
+      if (buf[0] == 'E')
+	error ("target memory fault, section %s, range 0x%08x -- 0x%08x",
+	       sectname, lma, lma + size);
+      if (buf[0] != 'C')
+	error ("remote target does not support this operation");
+
+      for (target_crc = 0, tmp = &buf[1]; *tmp; tmp++)
+	target_crc = target_crc * 16 + fromhex (*tmp);
+
+      printf_filtered ("Section %s, range 0x%08x -- 0x%08x: ",
+		       sectname, lma, lma + size);
+      if (host_crc == target_crc)
+	printf_filtered ("matched.\n");
+      else
+       {
+	 printf_filtered ("MIS-MATCHED!\n");
+	 mismatched++;
+       }
+
+      do_cleanups (old_chain);
+    }
+  if (mismatched > 0)
+    warning ("One or more sections of the remote executable does not match\n\
+the loaded file\n");
+  if (args && !matched)
+    printf_filtered ("No loaded section named '%s'.\n", args);
+}
+
+static int
+remote_query (query_type, buf, outbuf, bufsiz)
+     int query_type;
+     char *buf;
+     char *outbuf;
+     int *bufsiz;
+{
+  int i;
+  char buf2[PBUFSIZ];
+  char *p2 = &buf2[0];
+  char *p = buf;
+
+  if (! bufsiz)
+    error ("null pointer to remote bufer size specified");
+
+  /* minimum outbuf size is PBUFSIZE - if bufsiz is not large enough let 
+     the caller know and return what the minimum size is   */
+  /* Note: a zero bufsiz can be used to query the minimum buffer size */
+  if ( *bufsiz < PBUFSIZ )
+    {
+      *bufsiz = PBUFSIZ;
+      return -1;
+    }
+
+  /* except for querying the minimum buffer size, target must be open */
+  if (! remote_desc)
+    error ("remote query is only available after target open");
+
+  /* we only take uppercase letters as query types, at least for now */
+  if ( (query_type < 'A') || (query_type > 'Z') )
+    error ("invalid remote query type");
+
+  if (! buf)
+    error ("null remote query specified");
+
+  if (! outbuf)
+    error ("remote query requires a buffer to receive data");
+
+  outbuf[0] = '\0';
+
+  *p2++ = 'q';
+  *p2++ = query_type;
+
+  /* we used one buffer char for the remote protocol q command and another
+     for the query type.  As the remote protocol encapsulation uses 4 chars
+     plus one extra in case we are debugging (remote_debug),
+     we have PBUFZIZ - 7 left to pack the query string */
+  i = 0;
+  while ( buf[i] && (i < (PBUFSIZ - 8)) )
+    {
+      /* bad caller may have sent forbidden characters */
+      if ( (!isprint(buf[i])) || (buf[i] == '$') || (buf[i] == '#') )
+        error ("illegal characters in query string");
+
+      *p2++ = buf[i];
+      i++;
+    }
+  *p2 = buf[i];
+
+  if ( buf[i] )
+    error ("query larger than available buffer");
+
+  i = putpkt (buf2);
+  if ( i < 0 ) return i;
+
+  getpkt (outbuf, 0);
+
+  return 0;
+}
+
+static void
+packet_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char buf[PBUFSIZ];
+
+  if (! remote_desc)
+    error ("command can only be used with remote target");
+
+  if (! args)
+    error ("remote-packet command requires packet text as argument");
+
+  puts_filtered ("sending: ");
+  print_packet (args);
+  puts_filtered ("\n");
+  putpkt (args);
+
+  getpkt (buf, 0);
+  puts_filtered ("received: ");
+  print_packet (buf);
+  puts_filtered ("\n");
+}
+
+#if 0
+/* --------- UNIT_TEST for THREAD oriented PACKETS ------------------------- */
+
+static void display_thread_info PARAMS ((struct gdb_ext_thread_info *info));
+
+static void threadset_test_cmd PARAMS ((char *cmd, int tty));
+
+static void threadalive_test PARAMS ((char *cmd, int tty));
+
+static void threadlist_test_cmd PARAMS ((char *cmd, int tty));
+
+int get_and_display_threadinfo PARAMS ((threadref *ref));
+
+static void threadinfo_test_cmd PARAMS ((char *cmd, int tty));
+
+static int thread_display_step PARAMS ((threadref *ref, void *context));
+
+static void threadlist_update_test_cmd PARAMS ((char *cmd, int tty));
+
+static void init_remote_threadtests PARAMS ((void));
+
+#define SAMPLE_THREAD  0x05060708  /* Truncated 64 bit threadid */
+
+static void
+threadset_test_cmd (cmd, tty)
+     char *cmd;
+     int tty;
+{
+  int sample_thread = SAMPLE_THREAD;
+
+  printf_filtered ("Remote threadset test\n");
+  set_thread (sample_thread, 1);
+}
+
+
+static void
+threadalive_test (cmd, tty)
+     char *cmd;
+     int tty;
+{
+  int sample_thread = SAMPLE_THREAD;
+
+  if (remote_thread_alive (sample_thread))
+    printf_filtered ("PASS: Thread alive test\n");
+  else
+    printf_filtered ("FAIL: Thread alive test\n");
+}
+
+void output_threadid PARAMS ((char *title, threadref * ref));
+
+void
+output_threadid (title, ref)
+     char *title;
+     threadref *ref;
+{
+  char hexid[20];
+
+  pack_threadid (&hexid[0], ref);	/* Convert threead id into hex */
+  hexid[16] = 0;
+  printf_filtered ("%s  %s\n", title, (&hexid[0]));
+}
+
+static void
+threadlist_test_cmd (cmd, tty)
+     char *cmd;
+     int tty;
+{
+  int startflag = 1;
+  threadref nextthread;
+  int done, result_count;
+  threadref threadlist[3];
+
+  printf_filtered ("Remote Threadlist test\n");
+  if (!remote_get_threadlist (startflag, &nextthread, 3, &done,
+			      &result_count, &threadlist[0]))
+    printf_filtered ("FAIL: threadlist test\n");
+  else
+    {
+      threadref *scan = threadlist;
+      threadref *limit = scan + result_count;
+
+      while (scan < limit)
+	output_threadid (" thread ", scan++);
+    }
+}
+
+void
+display_thread_info (info)
+     struct gdb_ext_thread_info *info;
+{
+  output_threadid ("Threadid: ", &info->threadid);
+  printf_filtered ("Name: %s\n ", info->shortname);
+  printf_filtered ("State: %s\n", info->display);
+  printf_filtered ("other: %s\n\n", info->more_display);
+}
+
+int
+get_and_display_threadinfo (ref)
+     threadref *ref;
+{
+  int result;
+  int set;
+  struct gdb_ext_thread_info threadinfo;
+
+  set = TAG_THREADID | TAG_EXISTS | TAG_THREADNAME
+    | TAG_MOREDISPLAY | TAG_DISPLAY;
+  if (0 != (result = remote_get_threadinfo (ref, set, &threadinfo)))
+    display_thread_info (&threadinfo);
+  return result;
+}
+
+static void
+threadinfo_test_cmd (cmd, tty)
+     char *cmd;
+     int tty;
+{
+  int athread = SAMPLE_THREAD;
+  threadref thread;
+  int set;
+
+  int_to_threadref (&thread, athread);
+  printf_filtered ("Remote Threadinfo test\n");
+  if (!get_and_display_threadinfo (&thread))
+    printf_filtered ("FAIL cannot get thread info\n");
+}
+
+static int
+thread_display_step (ref, context)
+     threadref *ref;
+     void *context;
+{
+  /* output_threadid(" threadstep ",ref); *//* simple test */
+  return get_and_display_threadinfo (ref);
+}
+
+static void
+threadlist_update_test_cmd (cmd, tty)
+     char *cmd;
+     int tty;
+{
+  printf_filtered ("Remote Threadlist update test\n");
+  remote_threadlist_iterator (thread_display_step, 0, CRAZY_MAX_THREADS);
+}
+
+static void
+init_remote_threadtests (void)
+{
+  add_com ("tlist", class_obscure, threadlist_test_cmd,
+     "Fetch and print the remote list of thread identifiers, one pkt only");
+  add_com ("tinfo", class_obscure, threadinfo_test_cmd,
+	   "Fetch and display info about one thread");
+  add_com ("tset", class_obscure, threadset_test_cmd,
+	   "Test setting to a different thread");
+  add_com ("tupd", class_obscure, threadlist_update_test_cmd,
+	   "Iterate through updating all remote thread info");
+  add_com ("talive", class_obscure, threadalive_test,
+	   " Remote thread alive test ");
+}
+
+#endif /* 0 */
+
+static void
+init_remote_ops ()
+{
+  remote_ops.to_shortname = "remote";		
+  remote_ops.to_longname = "Remote serial target in gdb-specific protocol";
+  remote_ops.to_doc = 
+    "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";  
+  remote_ops.to_open = remote_open;		
+  remote_ops.to_close = remote_close;		
+  remote_ops.to_detach = remote_detach;
+  remote_ops.to_resume = remote_resume;	
+  remote_ops.to_wait = remote_wait;
+  remote_ops.to_fetch_registers = remote_fetch_registers;
+  remote_ops.to_store_registers = remote_store_registers;
+  remote_ops.to_prepare_to_store = remote_prepare_to_store;
+  remote_ops.to_xfer_memory = remote_xfer_memory;	
+  remote_ops.to_files_info = remote_files_info;	
+  remote_ops.to_insert_breakpoint = remote_insert_breakpoint;
+  remote_ops.to_remove_breakpoint = remote_remove_breakpoint;
+  remote_ops.to_kill = remote_kill;		
+  remote_ops.to_load = generic_load;		
+  remote_ops.to_mourn_inferior = remote_mourn;
+  remote_ops.to_thread_alive = remote_thread_alive;
+  remote_ops.to_stop = remote_stop;
+  remote_ops.to_query = remote_query;
+  remote_ops.to_stratum = process_stratum;
+  remote_ops.to_has_all_memory = 1;	
+  remote_ops.to_has_memory = 1;	
+  remote_ops.to_has_stack = 1;	
+  remote_ops.to_has_registers = 1;	
+  remote_ops.to_has_execution = 1;	
+  remote_ops.to_has_thread_control = tc_schedlock; /* can lock scheduler */
+  remote_ops.to_magic = OPS_MAGIC;	
+}
+
+/* Set up the extended remote vector by making a copy of the standard
+   remote vector and adding to it.  */
+
+static void
+init_extended_remote_ops ()
+{
+  extended_remote_ops = remote_ops;
+
+  extended_remote_ops.to_shortname = "extended-remote";	
+  extended_remote_ops.to_longname = 
+    "Extended remote serial target in gdb-specific protocol";
+  extended_remote_ops.to_doc = 
+    "Use a remote computer via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  extended_remote_ops.to_open = extended_remote_open;	
+  extended_remote_ops.to_create_inferior = extended_remote_create_inferior;
+  extended_remote_ops.to_mourn_inferior = extended_remote_mourn;
+} 
+
+void
+_initialize_remote ()
+{
+  init_remote_ops ();
+  add_target (&remote_ops);
+
+  init_extended_remote_ops ();
+  add_target (&extended_remote_ops);
+  init_remote_threads ();
+#if 0
+  init_remote_threadtests ();
+#endif
+
+  add_cmd ("compare-sections", class_obscure, compare_sections_command, 
+	   "Compare section data on target to the exec file.\n\
+Argument is a single section name (default: all loaded sections).", 
+	   &cmdlist);
+
+  add_cmd ("packet", class_maintenance, packet_command,
+	   "Send an arbitrary packet to a remote target.\n\
+   maintenance packet TEXT\n\
+If GDB is talking to an inferior via the GDB serial protocol, then\n\
+this command sends the string TEXT to the inferior, and displays the\n\
+response packet.  GDB supplies the initial `$' character, and the\n\
+terminating `#' character and checksum.",
+	   &maintenancelist);
+
+  add_show_from_set 
+    (add_set_cmd ("remotetimeout", no_class,
+		  var_integer, (char *)&remote_timeout,
+		  "Set timeout value for remote read.\n",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set 
+    (add_set_cmd ("remotebreak", no_class,
+		  var_integer, (char *)&remote_break,
+		  "Set whether to send break if interrupted.\n",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set 
+    (add_set_cmd ("remotewritesize", no_class,
+		  var_integer, (char *)&remote_write_size,
+		  "Set the maximum number of bytes per memory write packet.\n",
+		  &setlist),
+     &showlist);
+
+  remote_address_size = TARGET_PTR_BIT;
+  add_show_from_set 
+    (add_set_cmd ("remoteaddresssize", class_obscure,
+		  var_integer, (char *)&remote_address_size,
+		  "Set the maximum size of the address (in bits) \
+in a memory packet.\n",
+		  &setlist),
+     &showlist);  
+
+  add_show_from_set (add_set_cmd ("remotebinarydownload", no_class,
+				  var_boolean, (char *) &remote_binary_download,
+				  "Set binary downloads.\n", &setlist),
+		     &showlist);
+}
diff --git a/gdb/reply_mig_hack.awk b/gdb/reply_mig_hack.awk
new file mode 100644
index 0000000..310a40c
--- /dev/null
+++ b/gdb/reply_mig_hack.awk
@@ -0,0 +1,123 @@
+# Reply server mig-output massager
+#
+#   Copyright (C) 1995 Free Software Foundation, Inc.
+#
+#   Written by Miles Bader <miles@gnu.ai.mit.edu>
+#
+#   This program is free software; you can redistribute it and/or
+#   modify it under the terms of the GNU General Public License as
+#   published by the Free Software Foundation; either version 2, or (at
+#   your option) any later version.
+#
+#   This program is distributed in the hope that it will be useful, but
+#   WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   General Public License for more details.
+#
+#   You should have received a copy of the GNU General Public License
+#   along with this program; if not, write to the Free Software
+#   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+# This awk script hacks the output of mig-generated reply server code
+# so that it allows replies with just the error-code in them (as this is
+# how mig returns errors).
+#
+# It is highly, highly, dependent on the exact format of mig output.  Ick.
+#
+
+BEGIN { parse_phase = 0; }
+
+/^}/ { parse_phase = 0; }
+
+parse_phase == 0 && /^mig_internal void _X[a-zA-Z0-9_]*_reply/ {
+  # The start of a mig server routine.  Reset everything.  Note that we only
+  # mess with rpcs that have the suffix `_reply'.
+  num_args = 0;
+  num_checks = 0;
+  parse_phase = 1;
+  print; next;
+}
+
+parse_phase == 1 && /^[\t ]*typedef struct/ {
+  # The first structure in the server routine should describe the arguments
+  parse_phase = 2;
+  print; next;
+}
+
+parse_phase == 2 {
+  # The message header field in the args structure, which skip.
+  parse_phase = 3;
+  print; next;
+}
+
+parse_phase == 3 && /}/ {
+  # The args structure is over.
+  if (num_args > 1)
+    parse_phase = 5;
+  else
+    # There's no extra args that could screw up the normal mechanism for
+    # error returns, so we don't have to insert any new code.
+    parse_phase = 0;
+  print; next;
+}
+
+parse_phase == 3 {
+  # The type field for an argument.
+  arg_type_code_name[num_args] = $2;
+  sub (/;$/, "", arg_type_code_name[num_args]) # Get rid of the semi-colon
+  parse_phase = 4;
+  print; next;
+}
+
+parse_phase == 4 {
+  # The value field for an argument.
+  arg_name[num_args] = $2;
+  sub (/;$/, "", arg_name[num_args]) # Get rid of the semi-colon
+  arg_type[num_args] = $1;
+  num_args++;
+  parse_phase = 3;
+  print; next;
+}
+
+parse_phase == 5 && /^[ \t]*static const mach_msg_type_t/ {
+  # The type check structure for an argument.
+  arg_check_name[num_checks] = $4;
+  num_checks++;
+  print; next;
+}
+
+parse_phase == 5 && /^[ \t]*mig_external kern_return_t/ {
+  # The declaration of the user server function for this rpc.
+  user_function_name = $3;
+  print; next;
+}
+
+parse_phase == 5 && /^#if[ \t]TypeCheck/ {
+  # The first args type checking statement; we need to insert our chunk of
+  # code that bypasses all the type checks if this is an error return, after
+  # which we're done until we get to the next function.  Handily, the size
+  # of mig's Reply structure is also the size of the alternate Request 
+  # structure that we want to check for.
+  print "\tif (In0P->Head.msgh_size == sizeof (Reply)";
+  print "\t    && ! (In0P->Head.msgh_bits & MACH_MSGH_BITS_COMPLEX)";
+  print "\t    && *(int *)&In0P->" arg_type_code_name[0] " == *(int *)&" arg_check_name[0];
+  print "\t    && In0P->" arg_name[0] " != 0)";
+  print "\t  /* Error return, only the error code argument is passed.  */";
+  print "\t  {";
+  # Force the function into a type that only takes the first two args, via
+  # the temp variable SFUN (is there another way to correctly do this cast?).
+  # This is possibly bogus, but easier than supplying bogus values for all
+  # the other args (we can't just pass 0 for them, as they might not be scalar).
+  printf ("\t    kern_return_t (*sfun)(mach_port_t");
+  for (i = 0; i < num_args; i++)
+    printf (", %s", arg_type[i]);
+  printf (") = %s;\n", user_function_name);
+  print "\t    OutP->RetCode = (*(kern_return_t (*)(mach_port_t, kern_return_t))sfun) (In0P->Head.msgh_request_port, In0P->" arg_name[0] ");";
+  print "\t    return;";
+  print "\t  }";
+  print "";
+  parse_phase = 0;
+  print; next;
+}
+
+{ print; }
diff --git a/gdb/rom68k-rom.c b/gdb/rom68k-rom.c
new file mode 100644
index 0000000..831d299
--- /dev/null
+++ b/gdb/rom68k-rom.c
@@ -0,0 +1,169 @@
+/* Remote target glue for the ROM68K ROM monitor.
+   Copyright 1988, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void rom68k_open PARAMS ((char *args, int from_tty));
+
+static void
+rom68k_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int numregs;
+  int regno;
+
+  numregs = 1;
+  regno = -1;
+
+  if (regnamelen == 2)
+    switch (regname[0])
+      {
+      case 'S':
+	if (regname[1] == 'R')
+	  regno = PS_REGNUM;
+	break;
+      case 'P':
+	if (regname[1] == 'C')
+	  regno = PC_REGNUM;
+	break;
+      case 'D':
+	if (regname[1] != 'R')
+	  break;
+	regno = D0_REGNUM;
+	numregs = 8;
+	break;
+      case 'A':
+	if (regname[1] != 'R')
+	  break;
+	regno = A0_REGNUM;
+	numregs = 7;
+	break;
+      }
+  else if (regnamelen == 3)
+    switch (regname[0])
+      {
+      case 'I':
+	if (regname[1] == 'S' && regname[2] == 'P')
+	  regno = SP_REGNUM;
+      }
+
+  if (regno >= 0)
+    while (numregs-- > 0)
+      val = monitor_supply_register (regno++, val);
+}
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+static char *rom68k_regnames[NUM_REGS] = {
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "ISP",
+  "SR", "PC" };
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+static struct target_ops rom68k_ops;
+
+static char *rom68k_inits[] = {".\r\r", NULL}; /* Exits pm/pr & download cmds */
+
+static struct monitor_ops rom68k_cmds ;
+
+static void 
+init_rom68k_cmds(void)
+{
+  rom68k_cmds.flags =   0;
+  rom68k_cmds.init =   rom68k_inits; /* monitor init string */
+  rom68k_cmds.cont =   "go\r";
+  rom68k_cmds.step =   "st\r";
+  rom68k_cmds.stop =   NULL;
+  rom68k_cmds.set_break =   "db %x\r";
+  rom68k_cmds.clr_break =   "cb %x\r";
+  rom68k_cmds.clr_all_break =   "cb *\r";
+  rom68k_cmds.fill =   "fm %x %x %x\r";
+  rom68k_cmds.setmem.cmdb =     "pm %x %x\r";
+  rom68k_cmds.setmem.cmdw =     "pm;w %x %x\r";
+  rom68k_cmds.setmem.cmdl =     "pm;l %x %x\r";
+  rom68k_cmds.setmem.cmdll =     NULL;
+  rom68k_cmds.setmem.resp_delim =     NULL;
+  rom68k_cmds.setmem.term =     NULL;
+  rom68k_cmds.setmem.term_cmd =     NULL;
+  rom68k_cmds.getmem.cmdb =     "dm %x %x\r";
+  rom68k_cmds.getmem.cmdw =     "dm;w %x %x\r";
+  rom68k_cmds.getmem.cmdl =     "dm;l %x %x\r";
+  rom68k_cmds.getmem.cmdll =     NULL;
+  rom68k_cmds.getmem.resp_delim =     "  ";
+  rom68k_cmds.getmem.term =     NULL;
+    rom68k_cmds.getmem.term_cmd =     NULL;
+  rom68k_cmds.setreg.cmd =     "pr %s %x\r";
+  rom68k_cmds.setreg.resp_delim =     NULL;
+  rom68k_cmds.setreg.term =     NULL;
+  rom68k_cmds.setreg.term_cmd =     NULL ;
+  rom68k_cmds.getreg.cmd =     "pr %s\r" ;
+  rom68k_cmds.getreg.resp_delim =     ":  " ;
+  rom68k_cmds.getreg.term =     "= " ;
+  rom68k_cmds.getreg.term_cmd =     ";\r" ;
+  rom68k_cmds.dump_registers =   "dr\r" ;
+  rom68k_cmds.register_pattern =
+    "\\(\\w+\\)=\\([0-9a-fA-F]+\\( +[0-9a-fA-F]+\\b\\)*\\)" ;
+  rom68k_cmds.supply_register =   rom68k_supply_register;
+  rom68k_cmds.load_routine =   NULL;
+  rom68k_cmds.load =   "dc\r";
+  rom68k_cmds.loadresp =   "Waiting for S-records from host;.. ";
+  rom68k_cmds.prompt =   "ROM68K :-> ";
+  rom68k_cmds.line_term =   "\r";
+  rom68k_cmds.cmd_end =   ";\r";
+  rom68k_cmds.target =   &rom68k_ops;
+  rom68k_cmds.stopbits =   SERIAL_1_STOPBITS;
+  rom68k_cmds.regnames =   rom68k_regnames;
+  rom68k_cmds.magic =   MONITOR_OPS_MAGIC ;
+} /* init_rom68k_cmds */
+
+static void
+rom68k_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &rom68k_cmds, from_tty);
+}
+
+void
+_initialize_rom68k ()
+{
+  init_rom68k_cmds() ;
+  init_monitor_ops (&rom68k_ops);
+
+  rom68k_ops.to_shortname = "rom68k";
+  rom68k_ops.to_longname = "Rom68k debug monitor for the IDP Eval board";
+  rom68k_ops.to_doc = "Debug on a Motorola IDP eval board running the ROM68K monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  rom68k_ops.to_open = rom68k_open;
+
+  add_target (&rom68k_ops);
+}
diff --git a/gdb/rs6000-nat.c b/gdb/rs6000-nat.c
new file mode 100644
index 0000000..c74a36f
--- /dev/null
+++ b/gdb/rs6000-nat.c
@@ -0,0 +1,845 @@
+/* IBM RS/6000 native-dependent code for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1994, 1995, 1996, 1997, 1998
+	     Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "xcoffsolib.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "libbfd.h"  /* For bfd_cache_lookup (FIXME) */
+#include "bfd.h"
+#include "gdb-stabs.h"
+
+#include <sys/ptrace.h>
+#include <sys/reg.h>
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include <a.out.h>
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/core.h>
+#include <sys/ldr.h>
+
+extern int errno;
+
+extern struct vmap * map_vmap PARAMS ((bfd *bf, bfd *arch));
+
+extern struct target_ops exec_ops;
+
+static void
+vmap_exec PARAMS ((void));
+
+static void
+vmap_ldinfo PARAMS ((struct ld_info *));
+
+static struct vmap *
+add_vmap PARAMS ((struct ld_info *));
+
+static int
+objfile_symbol_add PARAMS ((char *));
+
+static void
+vmap_symtab PARAMS ((struct vmap *));
+
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, CORE_ADDR));
+
+static void
+exec_one_dummy_insn PARAMS ((void));
+
+extern void
+fixup_breakpoints PARAMS ((CORE_ADDR low, CORE_ADDR high, CORE_ADDR delta));
+
+/* Conversion from gdb-to-system special purpose register numbers.. */
+
+static int special_regs[] = {
+  IAR,				/* PC_REGNUM	*/
+  MSR,				/* PS_REGNUM	*/
+  CR,				/* CR_REGNUM	*/
+  LR,				/* LR_REGNUM	*/
+  CTR,				/* CTR_REGNUM	*/
+  XER,				/* XER_REGNUM   */
+  MQ				/* MQ_REGNUM	*/
+};
+
+void
+fetch_inferior_registers (regno)
+  int regno;
+{
+  int ii;
+  extern char registers[];
+
+  if (regno < 0) {			/* for all registers */
+
+    /* read 32 general purpose registers. */
+
+    for (ii=0; ii < 32; ++ii)
+      *(int*)&registers[REGISTER_BYTE (ii)] = 
+	ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii, 0, 0);
+
+    /* read general purpose floating point registers. */
+
+    for (ii=0; ii < 32; ++ii)
+      ptrace (PT_READ_FPR, inferior_pid, 
+	      (PTRACE_ARG3_TYPE) &registers [REGISTER_BYTE (FP0_REGNUM+ii)],
+	      FPR0+ii, 0);
+
+    /* read special registers. */
+    for (ii=0; ii <= LAST_UISA_SP_REGNUM-FIRST_UISA_SP_REGNUM; ++ii)
+      *(int*)&registers[REGISTER_BYTE (FIRST_UISA_SP_REGNUM+ii)] = 
+	ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) special_regs[ii],
+		0, 0);
+
+    registers_fetched ();
+    return;
+  }
+
+  /* else an individual register is addressed. */
+
+  else if (regno < FP0_REGNUM) {		/* a GPR */
+    *(int*)&registers[REGISTER_BYTE (regno)] =
+	ptrace (PT_READ_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno, 0, 0);
+  }
+  else if (regno <= FPLAST_REGNUM) {		/* a FPR */
+    ptrace (PT_READ_FPR, inferior_pid,
+	    (PTRACE_ARG3_TYPE) &registers [REGISTER_BYTE (regno)],
+	    (regno-FP0_REGNUM+FPR0), 0);
+  }
+  else if (regno <= LAST_UISA_SP_REGNUM) { /* a special register */
+    *(int*)&registers[REGISTER_BYTE (regno)] =
+	ptrace (PT_READ_GPR, inferior_pid,
+		(PTRACE_ARG3_TYPE) special_regs[regno-FIRST_UISA_SP_REGNUM],
+		0, 0);
+  }
+  else
+    fprintf_unfiltered (gdb_stderr, 
+			"gdb error: register no %d not implemented.\n",
+			regno);
+
+  register_valid [regno] = 1;
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  extern char registers[];
+
+  errno = 0;
+
+  if (regno == -1)
+    {			/* for all registers..	*/
+      int ii;
+
+       /* execute one dummy instruction (which is a breakpoint) in inferior
+          process. So give kernel a chance to do internal house keeping.
+	  Otherwise the following ptrace(2) calls will mess up user stack
+	  since kernel will get confused about the bottom of the stack (%sp) */
+
+       exec_one_dummy_insn ();
+
+      /* write general purpose registers first! */
+      for ( ii=GPR0; ii<=GPR31; ++ii)
+	{
+	  ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) ii,
+		  *(int*)&registers[REGISTER_BYTE (ii)], 0);
+	  if (errno)
+	    { 
+	      perror ("ptrace write_gpr");
+	      errno = 0;
+	    }
+	}
+
+      /* write floating point registers now. */
+      for ( ii=0; ii < 32; ++ii)
+	{
+	  ptrace (PT_WRITE_FPR, inferior_pid, 
+		  (PTRACE_ARG3_TYPE) &registers[REGISTER_BYTE (FP0_REGNUM+ii)],
+		  FPR0+ii, 0);
+	  if (errno)
+	    {
+	      perror ("ptrace write_fpr");
+	      errno = 0;
+	    }
+	}
+
+      /* write special registers. */
+      for (ii=0; ii <= LAST_UISA_SP_REGNUM-FIRST_UISA_SP_REGNUM; ++ii)
+	{
+	  ptrace (PT_WRITE_GPR, inferior_pid,
+		  (PTRACE_ARG3_TYPE) special_regs[ii],
+		  *(int*)&registers[REGISTER_BYTE (FIRST_UISA_SP_REGNUM+ii)],
+		  0);
+	  if (errno)
+	    {
+	      perror ("ptrace write_gpr");
+	      errno = 0;
+	    }
+	}
+    }
+
+  /* else, a specific register number is given... */
+
+  else if (regno < FP0_REGNUM)			/* a GPR */
+    {
+      ptrace (PT_WRITE_GPR, inferior_pid, (PTRACE_ARG3_TYPE) regno,
+	      *(int*)&registers[REGISTER_BYTE (regno)], 0);
+    }
+
+  else if (regno <= FPLAST_REGNUM)		/* a FPR */
+    {
+      ptrace (PT_WRITE_FPR, inferior_pid, 
+	      (PTRACE_ARG3_TYPE) &registers[REGISTER_BYTE (regno)],
+	      regno - FP0_REGNUM + FPR0, 0);
+    }
+
+  else if (regno <= LAST_UISA_SP_REGNUM) /* a special register */
+    {
+      ptrace (PT_WRITE_GPR, inferior_pid,
+	      (PTRACE_ARG3_TYPE) special_regs [regno-FIRST_UISA_SP_REGNUM],
+	      *(int*)&registers[REGISTER_BYTE (regno)], 0);
+    }
+
+  else
+    fprintf_unfiltered (gdb_stderr,
+			"Gdb error: register no %d not implemented.\n",
+			regno);
+
+  if (errno)
+    {
+      perror ("ptrace write");
+      errno = 0;
+    }
+}
+
+/* Execute one dummy breakpoint instruction.  This way we give the kernel
+   a chance to do some housekeeping and update inferior's internal data,
+   including u_area. */
+
+static void
+exec_one_dummy_insn ()
+{
+#define	DUMMY_INSN_ADDR	(TEXT_SEGMENT_BASE)+0x200
+
+  char shadow_contents[BREAKPOINT_MAX];	/* Stash old bkpt addr contents */
+  int status, pid;
+  CORE_ADDR prev_pc;
+
+  /* We plant one dummy breakpoint into DUMMY_INSN_ADDR address. We
+     assume that this address will never be executed again by the real
+     code. */
+
+  target_insert_breakpoint (DUMMY_INSN_ADDR, shadow_contents);
+
+  errno = 0;
+
+  /* You might think this could be done with a single ptrace call, and
+     you'd be correct for just about every platform I've ever worked
+     on.  However, rs6000-ibm-aix4.1.3 seems to have screwed this up --
+     the inferior never hits the breakpoint (it's also worth noting
+     powerpc-ibm-aix4.1.3 works correctly).  */
+  prev_pc = read_pc ();
+  write_pc (DUMMY_INSN_ADDR);
+  ptrace (PT_CONTINUE, inferior_pid, (PTRACE_ARG3_TYPE)1, 0, 0);
+
+  if (errno)
+    perror ("pt_continue");
+
+  do {
+    pid = wait (&status);
+  } while (pid != inferior_pid);
+    
+  write_pc (prev_pc);
+  target_remove_breakpoint (DUMMY_INSN_ADDR, shadow_contents);
+}
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+  /* fetch GPRs and special registers from the first register section
+     in core bfd. */
+  if (which == 0)
+    {
+      /* copy GPRs first. */
+      memcpy (registers, core_reg_sect, 32 * 4);
+
+      /* gdb's internal register template and bfd's register section layout
+	 should share a common include file. FIXMEmgo */
+      /* then comes special registes. They are supposed to be in the same
+	 order in gdb template and bfd `.reg' section. */
+      core_reg_sect += (32 * 4);
+      memcpy (&registers [REGISTER_BYTE (FIRST_UISA_SP_REGNUM)], 
+	      core_reg_sect, 
+	      (LAST_UISA_SP_REGNUM - FIRST_UISA_SP_REGNUM + 1) * 4);
+    }
+
+  /* fetch floating point registers from register section 2 in core bfd. */
+  else if (which == 2)
+    memcpy (&registers [REGISTER_BYTE (FP0_REGNUM)], core_reg_sect, 32 * 8);
+
+  else
+    fprintf_unfiltered 
+      (gdb_stderr, 
+       "Gdb error: unknown parameter to fetch_core_registers().\n");
+}
+
+/* handle symbol translation on vmapping */
+
+static void
+vmap_symtab (vp)
+     register struct vmap *vp;
+{
+  register struct objfile *objfile;
+  struct section_offsets *new_offsets;
+  int i;
+  
+  objfile = vp->objfile;
+  if (objfile == NULL)
+    {
+      /* OK, it's not an objfile we opened ourselves.
+	 Currently, that can only happen with the exec file, so
+	 relocate the symbols for the symfile.  */
+      if (symfile_objfile == NULL)
+	return;
+      objfile = symfile_objfile;
+    }
+
+  new_offsets = alloca
+    (sizeof (struct section_offsets)
+     + sizeof (new_offsets->offsets) * objfile->num_sections);
+
+  for (i = 0; i < objfile->num_sections; ++i)
+    ANOFFSET (new_offsets, i) = ANOFFSET (objfile->section_offsets, i);
+  
+  /* The symbols in the object file are linked to the VMA of the section,
+     relocate them VMA relative.  */
+  ANOFFSET (new_offsets, SECT_OFF_TEXT) = vp->tstart - vp->tvma;
+  ANOFFSET (new_offsets, SECT_OFF_DATA) = vp->dstart - vp->dvma;
+  ANOFFSET (new_offsets, SECT_OFF_BSS) = vp->dstart - vp->dvma;
+
+  objfile_relocate (objfile, new_offsets);
+}
+
+/* Add symbols for an objfile.  */
+
+static int
+objfile_symbol_add (arg)
+     char *arg;
+{
+  struct objfile *obj = (struct objfile *) arg;
+
+  syms_from_objfile (obj, 0, 0, 0);
+  new_symfile_objfile (obj, 0, 0);
+  return 1;
+}
+
+/* Add a new vmap entry based on ldinfo() information.
+
+   If ldi->ldinfo_fd is not valid (e.g. this struct ld_info is from a
+   core file), the caller should set it to -1, and we will open the file.
+
+   Return the vmap new entry.  */
+
+static struct vmap *
+add_vmap (ldi)
+     register struct ld_info *ldi; 
+{
+  bfd *abfd, *last;
+  register char *mem, *objname;
+  struct objfile *obj;
+  struct vmap *vp;
+
+  /* This ldi structure was allocated using alloca() in 
+     xcoff_relocate_symtab(). Now we need to have persistent object 
+     and member names, so we should save them. */
+
+  mem = ldi->ldinfo_filename + strlen (ldi->ldinfo_filename) + 1;
+  mem = savestring (mem, strlen (mem));
+  objname = savestring (ldi->ldinfo_filename, strlen (ldi->ldinfo_filename));
+
+  if (ldi->ldinfo_fd < 0)
+    /* Note that this opens it once for every member; a possible
+       enhancement would be to only open it once for every object.  */
+    abfd = bfd_openr (objname, gnutarget);
+  else
+    abfd = bfd_fdopenr (objname, gnutarget, ldi->ldinfo_fd);
+  if (!abfd)
+    error ("Could not open `%s' as an executable file: %s",
+	   objname, bfd_errmsg (bfd_get_error ()));
+
+  /* make sure we have an object file */
+
+  if (bfd_check_format (abfd, bfd_object))
+    vp = map_vmap (abfd, 0);
+
+  else if (bfd_check_format (abfd, bfd_archive))
+    {
+      last = 0;
+      /* FIXME??? am I tossing BFDs?  bfd? */
+      while ((last = bfd_openr_next_archived_file (abfd, last)))
+	if (STREQ (mem, last->filename))
+	  break;
+
+      if (!last)
+	{
+	  bfd_close (abfd);
+	  /* FIXME -- should be error */
+	  warning ("\"%s\": member \"%s\" missing.", abfd->filename, mem);
+	  return 0;
+	}
+
+      if (!bfd_check_format(last, bfd_object))
+	{
+	  bfd_close (last);	/* XXX???	*/
+	  goto obj_err;
+	}
+
+      vp = map_vmap (last, abfd);
+    }
+  else
+    {
+    obj_err:
+      bfd_close (abfd);
+      error ("\"%s\": not in executable format: %s.",
+	     objname, bfd_errmsg (bfd_get_error ()));
+      /*NOTREACHED*/
+    }
+  obj = allocate_objfile (vp->bfd, 0, 0, 0);
+  vp->objfile = obj;
+
+#ifndef SOLIB_SYMBOLS_MANUAL
+  if (catch_errors (objfile_symbol_add, (char *)obj,
+		    "Error while reading shared library symbols:\n",
+		    RETURN_MASK_ALL))
+    {
+      /* Note this is only done if symbol reading was successful.  */
+      vmap_symtab (vp);
+      vp->loaded = 1;
+    }
+#endif
+  return vp;
+}
+
+/* update VMAP info with ldinfo() information
+   Input is ptr to ldinfo() results.  */
+
+static void
+vmap_ldinfo (ldi)
+     register struct ld_info *ldi;
+{
+  struct stat ii, vi;
+  register struct vmap *vp;
+  int got_one, retried;
+  int got_exec_file = 0;
+
+  /* For each *ldi, see if we have a corresponding *vp.
+     If so, update the mapping, and symbol table.
+     If not, add an entry and symbol table.  */
+
+  do {
+    char *name = ldi->ldinfo_filename;
+    char *memb = name + strlen(name) + 1;
+
+    retried = 0;
+
+    if (fstat (ldi->ldinfo_fd, &ii) < 0)
+      {
+	/* The kernel sets ld_info to -1, if the process is still using the
+	   object, and the object is removed. Keep the symbol info for the
+	   removed object and issue a warning.  */
+	warning ("%s (fd=%d) has disappeared, keeping its symbols",
+		 name, ldi->ldinfo_fd);
+        continue;
+      }
+  retry:
+    for (got_one = 0, vp = vmap; vp; vp = vp->nxt)
+      {
+	struct objfile *objfile;
+
+	/* First try to find a `vp', which is the same as in ldinfo.
+	   If not the same, just continue and grep the next `vp'. If same,
+	   relocate its tstart, tend, dstart, dend values. If no such `vp'
+	   found, get out of this for loop, add this ldi entry as a new vmap
+	   (add_vmap) and come back, find its `vp' and so on... */
+
+	/* The filenames are not always sufficient to match on. */
+
+	if ((name[0] == '/' && !STREQ(name, vp->name))
+	    || (memb[0] && !STREQ(memb, vp->member)))
+	  continue;
+
+	/* See if we are referring to the same file.
+	   We have to check objfile->obfd, symfile.c:reread_symbols might
+	   have updated the obfd after a change.  */
+	objfile = vp->objfile == NULL ? symfile_objfile : vp->objfile;
+	if (objfile == NULL
+	    || objfile->obfd == NULL
+	    || bfd_stat (objfile->obfd, &vi) < 0)
+	  {
+	    warning ("Unable to stat %s, keeping its symbols", name);
+	    continue;
+	  }
+
+	if (ii.st_dev != vi.st_dev || ii.st_ino != vi.st_ino)
+	  continue;
+
+	if (!retried)
+	  close (ldi->ldinfo_fd);
+
+	++got_one;
+
+	/* Found a corresponding VMAP.  Remap!  */
+
+	/* We can assume pointer == CORE_ADDR, this code is native only.  */
+	vp->tstart = (CORE_ADDR) ldi->ldinfo_textorg;
+	vp->tend   = vp->tstart + ldi->ldinfo_textsize;
+	vp->dstart = (CORE_ADDR) ldi->ldinfo_dataorg;
+	vp->dend   = vp->dstart + ldi->ldinfo_datasize;
+
+	/* The run time loader maps the file header in addition to the text
+	   section and returns a pointer to the header in ldinfo_textorg.
+	   Adjust the text start address to point to the real start address
+	   of the text section.  */
+	vp->tstart += vp->toffs;
+
+	/* The objfile is only NULL for the exec file.  */
+	if (vp->objfile == NULL)
+	  got_exec_file = 1;
+
+	/* relocate symbol table(s). */
+	vmap_symtab (vp);
+
+	/* There may be more, so we don't break out of the loop.  */
+      }
+
+    /* if there was no matching *vp, we must perforce create the sucker(s) */
+    if (!got_one && !retried)
+      {
+	add_vmap (ldi);
+	++retried;
+	goto retry;
+      }
+  } while (ldi->ldinfo_next
+	   && (ldi = (void *) (ldi->ldinfo_next + (char *) ldi)));
+
+  /* If we don't find the symfile_objfile anywhere in the ldinfo, it
+     is unlikely that the symbol file is relocated to the proper
+     address.  And we might have attached to a process which is
+     running a different copy of the same executable.  */
+  if (symfile_objfile != NULL && !got_exec_file)
+    {
+      warning_begin ();
+      fputs_unfiltered ("Symbol file ", gdb_stderr);
+      fputs_unfiltered (symfile_objfile->name, gdb_stderr);
+      fputs_unfiltered ("\nis not mapped; discarding it.\n\
+If in fact that file has symbols which the mapped files listed by\n\
+\"info files\" lack, you can load symbols with the \"symbol-file\" or\n\
+\"add-symbol-file\" commands (note that you must take care of relocating\n\
+symbols to the proper address).\n", gdb_stderr);
+      free_objfile (symfile_objfile);
+      symfile_objfile = NULL;
+    }
+  breakpoint_re_set ();
+}
+
+/* As well as symbol tables, exec_sections need relocation. After
+   the inferior process' termination, there will be a relocated symbol
+   table exist with no corresponding inferior process. At that time, we
+   need to use `exec' bfd, rather than the inferior process's memory space
+   to look up symbols.
+
+   `exec_sections' need to be relocated only once, as long as the exec
+   file remains unchanged.
+*/
+
+static void
+vmap_exec ()
+{
+  static bfd *execbfd;
+  int i;
+
+  if (execbfd == exec_bfd)
+    return;
+
+  execbfd = exec_bfd;
+
+  if (!vmap || !exec_ops.to_sections)
+    error ("vmap_exec: vmap or exec_ops.to_sections == 0\n");
+
+  for (i=0; &exec_ops.to_sections[i] < exec_ops.to_sections_end; i++)
+    {
+      if (STREQ(".text", exec_ops.to_sections[i].the_bfd_section->name))
+	{
+	  exec_ops.to_sections[i].addr += vmap->tstart - vmap->tvma;
+	  exec_ops.to_sections[i].endaddr += vmap->tstart - vmap->tvma;
+	}
+      else if (STREQ(".data", exec_ops.to_sections[i].the_bfd_section->name))
+	{
+	  exec_ops.to_sections[i].addr += vmap->dstart - vmap->dvma;
+	  exec_ops.to_sections[i].endaddr += vmap->dstart - vmap->dvma;
+	}
+      else if (STREQ(".bss", exec_ops.to_sections[i].the_bfd_section->name))
+	{
+	  exec_ops.to_sections[i].addr += vmap->dstart - vmap->dvma;
+	  exec_ops.to_sections[i].endaddr += vmap->dstart - vmap->dvma;
+	}
+    }
+}
+
+/* xcoff_relocate_symtab -	hook for symbol table relocation.
+   also reads shared libraries.. */
+
+void
+xcoff_relocate_symtab (pid)
+     unsigned int pid;
+{
+#define	MAX_LOAD_SEGS 64		/* maximum number of load segments */
+
+  struct ld_info *ldi;
+
+  ldi = (void *) alloca(MAX_LOAD_SEGS * sizeof (*ldi));
+
+  /* According to my humble theory, AIX has some timing problems and
+     when the user stack grows, kernel doesn't update stack info in time
+     and ptrace calls step on user stack. That is why we sleep here a little,
+     and give kernel to update its internals. */
+
+  usleep (36000);
+
+  errno = 0;
+  ptrace (PT_LDINFO, pid, (PTRACE_ARG3_TYPE) ldi,
+	  MAX_LOAD_SEGS * sizeof(*ldi), (int *) ldi);
+  if (errno)
+    perror_with_name ("ptrace ldinfo");
+
+  vmap_ldinfo (ldi);
+
+  /* relocate the exec and core sections as well. */
+  vmap_exec ();
+}
+
+/* Core file stuff.  */
+
+/* Relocate symtabs and read in shared library info, based on symbols
+   from the core file.  */
+
+void
+xcoff_relocate_core (target)
+     struct target_ops *target;
+{
+/* Offset of member MEMBER in a struct of type TYPE.  */
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((int) &((TYPE *)0)->MEMBER)
+#endif
+
+/* Size of a struct ld_info except for the variable-length filename.  */
+#define LDINFO_SIZE (offsetof (struct ld_info, ldinfo_filename))
+
+  sec_ptr ldinfo_sec;
+  int offset = 0;
+  struct ld_info *ldip;
+  struct vmap *vp;
+
+  /* Allocated size of buffer.  */
+  int buffer_size = LDINFO_SIZE;
+  char *buffer = xmalloc (buffer_size);
+  struct cleanup *old = make_cleanup (free_current_contents, &buffer);
+    
+  /* FIXME, this restriction should not exist.  For now, though I'll
+     avoid coredumps with error() pending a real fix.  */
+  if (vmap == NULL)
+    error
+      ("Can't debug a core file without an executable file (on the RS/6000)");
+  
+  ldinfo_sec = bfd_get_section_by_name (core_bfd, ".ldinfo");
+  if (ldinfo_sec == NULL)
+    {
+    bfd_err:
+      fprintf_filtered (gdb_stderr, "Couldn't get ldinfo from core file: %s\n",
+			bfd_errmsg (bfd_get_error ()));
+      do_cleanups (old);
+      return;
+    }
+  do
+    {
+      int i;
+      int names_found = 0;
+
+      /* Read in everything but the name.  */
+      if (bfd_get_section_contents (core_bfd, ldinfo_sec, buffer,
+				    offset, LDINFO_SIZE) == 0)
+	goto bfd_err;
+
+      /* Now the name.  */
+      i = LDINFO_SIZE;
+      do
+	{
+	  if (i == buffer_size)
+	    {
+	      buffer_size *= 2;
+	      buffer = xrealloc (buffer, buffer_size);
+	    }
+	  if (bfd_get_section_contents (core_bfd, ldinfo_sec, &buffer[i],
+					offset + i, 1) == 0)
+	    goto bfd_err;
+	  if (buffer[i++] == '\0')
+	    ++names_found;
+	} while (names_found < 2);
+
+      ldip = (struct ld_info *) buffer;
+
+      /* Can't use a file descriptor from the core file; need to open it.  */
+      ldip->ldinfo_fd = -1;
+      
+      /* The first ldinfo is for the exec file, allocated elsewhere.  */
+      if (offset == 0)
+	vp = vmap;
+      else
+	vp = add_vmap (ldip);
+
+      offset += ldip->ldinfo_next;
+
+      /* We can assume pointer == CORE_ADDR, this code is native only.  */
+      vp->tstart = (CORE_ADDR) ldip->ldinfo_textorg;
+      vp->tend = vp->tstart + ldip->ldinfo_textsize;
+      vp->dstart = (CORE_ADDR) ldip->ldinfo_dataorg;
+      vp->dend = vp->dstart + ldip->ldinfo_datasize;
+
+      /* The run time loader maps the file header in addition to the text
+	 section and returns a pointer to the header in ldinfo_textorg.
+	 Adjust the text start address to point to the real start address
+	 of the text section.  */
+      vp->tstart += vp->toffs;
+
+      /* Unless this is the exec file,
+	 add our sections to the section table for the core target.  */
+      if (vp != vmap)
+	{
+	  int count;
+	  struct section_table *stp;
+	  int update_coreops;
+
+	  /* We must update the to_sections field in the core_ops structure
+	     now to avoid dangling pointer dereferences.  */
+	  update_coreops = core_ops.to_sections == target->to_sections;
+	  
+	  count = target->to_sections_end - target->to_sections;
+	  count += 2;
+	  target->to_sections = (struct section_table *)
+	    xrealloc (target->to_sections,
+		      sizeof (struct section_table) * count);
+	  target->to_sections_end = target->to_sections + count;
+
+	  /* Update the to_sections field in the core_ops structure
+	     if needed.  */
+	  if (update_coreops)
+	    {
+	      core_ops.to_sections = target->to_sections;
+	      core_ops.to_sections_end = target->to_sections_end;
+	    }
+	  stp = target->to_sections_end - 2;
+
+	  stp->bfd = vp->bfd;
+	  stp->the_bfd_section = bfd_get_section_by_name (stp->bfd, ".text");
+	  stp->addr = vp->tstart;
+	  stp->endaddr = vp->tend;
+	  stp++;
+	  
+	  stp->bfd = vp->bfd;
+	  stp->the_bfd_section = bfd_get_section_by_name (stp->bfd, ".data");
+	  stp->addr = vp->dstart;
+	  stp->endaddr = vp->dend;
+	}
+
+      vmap_symtab (vp);
+    } while (ldip->ldinfo_next != 0);
+  vmap_exec ();
+  breakpoint_re_set ();
+  do_cleanups (old);
+}
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+/* Under AIX, we have to pass the correct TOC pointer to a function
+   when calling functions in the inferior.
+   We try to find the relative toc offset of the objfile containing PC
+   and add the current load address of the data segment from the vmap.  */
+
+static CORE_ADDR
+find_toc_address (pc)
+     CORE_ADDR pc;
+{
+  struct vmap *vp;
+
+  for (vp = vmap; vp; vp = vp->nxt)
+    {
+      if (pc >= vp->tstart && pc < vp->tend)
+	{
+	  /* vp->objfile is only NULL for the exec file.  */
+	  return vp->dstart + get_toc_offset (vp->objfile == NULL
+					      ? symfile_objfile
+					      : vp->objfile);
+	}
+    }
+  error ("Unable to find TOC entry for pc 0x%x\n", pc);
+}
+
+/* Register that we are able to handle rs6000 core file formats. */
+
+static struct core_fns rs6000_core_fns =
+{
+  bfd_target_coff_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_rs6000 ()
+{
+  /* Initialize hook in rs6000-tdep.c for determining the TOC address when
+     calling functions in the inferior.  */
+  find_toc_address_hook = &find_toc_address;
+
+  /* For native configurations, where this module is included, inform
+     the xcoffsolib module where it can find the function for symbol table
+     relocation at runtime. */
+  xcoff_relocate_symtab_hook = &xcoff_relocate_symtab;
+  add_core_fns (&rs6000_core_fns);
+}
diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c
new file mode 100644
index 0000000..57f1df1
--- /dev/null
+++ b/gdb/rs6000-tdep.c
@@ -0,0 +1,1800 @@
+/* Target-dependent code for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "target.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "xcoffsolib.h"
+
+extern int errno;
+
+/* Breakpoint shadows for the single step instructions will be kept here. */
+
+static struct sstep_breaks {
+  /* Address, or 0 if this is not in use.  */
+  CORE_ADDR address;
+  /* Shadow contents.  */
+  char data[4];
+} stepBreaks[2];
+
+/* Hook for determining the TOC address when calling functions in the
+   inferior under AIX. The initialization code in rs6000-nat.c sets
+   this hook to point to find_toc_address.  */
+
+CORE_ADDR (*find_toc_address_hook) PARAMS ((CORE_ADDR)) = NULL;
+
+/* Static function prototypes */
+
+static CORE_ADDR branch_dest PARAMS ((int opcode, int instr, CORE_ADDR pc,
+				      CORE_ADDR safety));
+
+static void frame_get_saved_regs PARAMS ((struct frame_info *fi,
+					  struct rs6000_framedata *fdatap));
+
+static void pop_dummy_frame PARAMS ((void));
+
+static CORE_ADDR frame_initial_stack_address PARAMS ((struct frame_info *));
+
+/* Fill in fi->saved_regs */
+
+struct frame_extra_info
+{
+  /* Functions calling alloca() change the value of the stack
+     pointer. We need to use initial stack pointer (which is saved in
+     r31 by gcc) in such cases. If a compiler emits traceback table,
+     then we should use the alloca register specified in traceback
+     table. FIXME. */
+  CORE_ADDR initial_sp;			/* initial stack pointer. */
+};
+
+void
+rs6000_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  fi->extra_info = (struct frame_extra_info*)
+    frame_obstack_alloc (sizeof (struct frame_extra_info));
+  fi->extra_info->initial_sp = 0;
+  if (fi->next != (CORE_ADDR) 0
+      && fi->pc < TEXT_SEGMENT_BASE)
+    /* We're in get_prev_frame_info */
+    /* and this is a special signal frame.  */
+    /* (fi->pc will be some low address in the kernel, */
+    /*  to which the signal handler returns).  */
+    fi->signal_handler_caller = 1;
+}
+
+
+void
+rs6000_frame_init_saved_regs (fi)
+     struct frame_info *fi;
+{
+  frame_get_saved_regs (fi, NULL);
+}
+
+CORE_ADDR
+rs6000_frame_args_address (fi)
+     struct frame_info *fi;
+{
+  if (fi->extra_info->initial_sp != 0)
+    return fi->extra_info->initial_sp;
+  else
+    return frame_initial_stack_address (fi);
+}
+
+
+/* Calculate the destination of a branch/jump.  Return -1 if not a branch.  */
+
+static CORE_ADDR
+branch_dest (opcode, instr, pc, safety)
+     int opcode;
+     int instr;
+     CORE_ADDR pc;
+     CORE_ADDR safety;
+{
+  CORE_ADDR dest;
+  int immediate;
+  int absolute;
+  int ext_op;
+
+  absolute = (int) ((instr >> 1) & 1);
+
+  switch (opcode) {
+     case 18	:
+	immediate = ((instr & ~3) << 6) >> 6;	/* br unconditional */
+	if (absolute)
+	  dest = immediate;	
+	else
+	  dest = pc + immediate;
+	break;
+
+     case 16	:  
+        immediate = ((instr & ~3) << 16) >> 16;	/* br conditional */
+	if (absolute)
+	  dest = immediate;	
+	else
+	  dest = pc + immediate;
+	break;
+
+      case 19	:
+	ext_op = (instr>>1) & 0x3ff;
+
+	if (ext_op == 16)			/* br conditional register */
+	  {
+	    dest = read_register (LR_REGNUM) & ~3;
+
+	    /* If we are about to return from a signal handler, dest is
+	       something like 0x3c90.  The current frame is a signal handler
+	       caller frame, upon completion of the sigreturn system call
+	       execution will return to the saved PC in the frame.  */
+	    if (dest < TEXT_SEGMENT_BASE)
+	      {
+		struct frame_info *fi;
+
+		fi = get_current_frame ();
+		if (fi != NULL)
+		  dest = read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET,
+					      4);
+	      }
+	  }
+
+	else if (ext_op == 528)			/* br cond to count reg */
+	  {
+	    dest = read_register (CTR_REGNUM) & ~3;
+
+	    /* If we are about to execute a system call, dest is something
+	       like 0x22fc or 0x3b00.  Upon completion the system call
+	       will return to the address in the link register.  */
+	    if (dest < TEXT_SEGMENT_BASE)
+	      dest = read_register (LR_REGNUM) & ~3;
+	  }
+	else return -1; 
+	break;
+	
+       default: return -1;
+  }
+  return (dest < TEXT_SEGMENT_BASE) ? safety : dest;
+}
+
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BIG_BREAKPOINT { 0x7d, 0x82, 0x10, 0x08 }
+#define LITTLE_BREAKPOINT { 0x08, 0x10, 0x82, 0x7d }
+
+unsigned char *
+rs6000_breakpoint_from_pc (bp_addr, bp_size)
+     CORE_ADDR *bp_addr;
+     int *bp_size;
+{
+  static unsigned char big_breakpoint[] = BIG_BREAKPOINT;
+  static unsigned char little_breakpoint[] = LITTLE_BREAKPOINT;
+  *bp_size = 4;
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return big_breakpoint;
+  else
+    return little_breakpoint;
+}
+
+
+/* AIX does not support PT_STEP. Simulate it. */
+
+void
+rs6000_software_single_step (signal, insert_breakpoints_p)
+     unsigned int signal;
+     int insert_breakpoints_p;
+{
+#define	INSNLEN(OPCODE)	 4
+
+  static char le_breakp[] = LITTLE_BREAKPOINT;
+  static char be_breakp[] = BIG_BREAKPOINT;
+  char *breakp = TARGET_BYTE_ORDER == BIG_ENDIAN ? be_breakp : le_breakp;
+  int ii, insn;
+  CORE_ADDR loc;
+  CORE_ADDR breaks[2];
+  int opcode;
+
+  if (insert_breakpoints_p) {
+
+    loc = read_pc ();
+
+    insn = read_memory_integer (loc, 4);
+
+    breaks[0] = loc + INSNLEN(insn);
+    opcode = insn >> 26;
+    breaks[1] = branch_dest (opcode, insn, loc, breaks[0]);
+
+    /* Don't put two breakpoints on the same address. */
+    if (breaks[1] == breaks[0])
+      breaks[1] = -1;
+
+    stepBreaks[1].address = 0;
+
+    for (ii=0; ii < 2; ++ii) {
+
+      /* ignore invalid breakpoint. */
+      if ( breaks[ii] == -1)
+        continue;
+
+      read_memory (breaks[ii], stepBreaks[ii].data, 4);
+
+      write_memory (breaks[ii], breakp, 4);
+      stepBreaks[ii].address = breaks[ii];
+    }  
+
+  } else {
+
+    /* remove step breakpoints. */
+    for (ii=0; ii < 2; ++ii)
+      if (stepBreaks[ii].address != 0)
+        write_memory 
+           (stepBreaks[ii].address, stepBreaks[ii].data, 4);
+
+  }
+  errno = 0;			/* FIXME, don't ignore errors! */
+			/* What errors?  {read,write}_memory call error().  */
+}
+
+
+/* return pc value after skipping a function prologue and also return
+   information about a function frame.
+
+   in struct rs6000_framedata fdata:
+    - frameless is TRUE, if function does not have a frame.
+    - nosavedpc is TRUE, if function does not save %pc value in its frame.
+    - offset is the initial size of this stack frame --- the amount by
+      which we decrement the sp to allocate the frame.
+    - saved_gpr is the number of the first saved gpr.
+    - saved_fpr is the number of the first saved fpr.
+    - alloca_reg is the number of the register used for alloca() handling.
+      Otherwise -1.
+    - gpr_offset is the offset of the first saved gpr from the previous frame.
+    - fpr_offset is the offset of the first saved fpr from the previous frame.
+    - lr_offset is the offset of the saved lr
+    - cr_offset is the offset of the saved cr
+*/
+
+#define SIGNED_SHORT(x) 						\
+  ((sizeof (short) == 2)						\
+   ? ((int)(short)(x))							\
+   : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
+
+#define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
+
+CORE_ADDR
+skip_prologue (pc, fdata)
+     CORE_ADDR pc;
+     struct rs6000_framedata *fdata; 
+{
+  CORE_ADDR orig_pc = pc;
+  char buf[4];
+  unsigned long op;
+  long offset = 0;
+  int lr_reg = 0;
+  int cr_reg = 0;
+  int reg;
+  int framep = 0;
+  int minimal_toc_loaded = 0;
+  static struct rs6000_framedata zero_frame;
+
+  *fdata = zero_frame;
+  fdata->saved_gpr = -1;
+  fdata->saved_fpr = -1;
+  fdata->alloca_reg = -1;
+  fdata->frameless = 1;
+  fdata->nosavedpc = 1;
+
+  if (target_read_memory (pc, buf, 4))
+    return pc;			/* Can't access it -- assume no prologue. */
+
+  /* Assume that subsequent fetches can fail with low probability.  */
+  pc -= 4;
+  for (;;)
+    {
+      pc += 4;
+      op = read_memory_integer (pc, 4);
+
+      if ((op & 0xfc1fffff) == 0x7c0802a6) {		/* mflr Rx */
+	lr_reg = (op & 0x03e00000) | 0x90010000;
+	continue;
+
+      } else if ((op & 0xfc1fffff) == 0x7c000026) {	/* mfcr Rx */
+	cr_reg = (op & 0x03e00000) | 0x90010000;
+	continue;
+
+      } else if ((op & 0xfc1f0000) == 0xd8010000) {	/* stfd Rx,NUM(r1) */
+	reg = GET_SRC_REG (op);
+	if (fdata->saved_fpr == -1 || fdata->saved_fpr > reg) {
+	  fdata->saved_fpr = reg;
+	  fdata->fpr_offset = SIGNED_SHORT (op) + offset;
+	}
+	continue;
+
+      } else if (((op & 0xfc1f0000) == 0xbc010000) || 	/* stm Rx, NUM(r1) */
+		 ((op & 0xfc1f0000) == 0x90010000 &&	/* st rx,NUM(r1), 
+							   rx >= r13 */
+		  (op & 0x03e00000) >= 0x01a00000)) {
+
+	reg = GET_SRC_REG (op);
+	if (fdata->saved_gpr == -1 || fdata->saved_gpr > reg) {
+	  fdata->saved_gpr = reg;
+	  fdata->gpr_offset = SIGNED_SHORT (op) + offset;
+	}
+	continue;
+
+      } else if ((op & 0xffff0000) == 0x3c000000) {	/* addis 0,0,NUM, used
+							   for >= 32k frames */
+	fdata->offset = (op & 0x0000ffff) << 16;
+	fdata->frameless = 0;
+	continue;
+
+      } else if ((op & 0xffff0000) == 0x60000000) {	/* ori 0,0,NUM, 2nd ha
+							   lf of >= 32k frames */
+	fdata->offset |= (op & 0x0000ffff);
+	fdata->frameless = 0;
+	continue;
+
+      } else if ((op & 0xffff0000) == lr_reg) {		/* st Rx,NUM(r1) 
+							   where Rx == lr */
+	fdata->lr_offset = SIGNED_SHORT (op) + offset;
+	fdata->nosavedpc = 0;
+	lr_reg = 0;
+	continue;
+
+      } else if ((op & 0xffff0000) == cr_reg) {		/* st Rx,NUM(r1) 
+							   where Rx == cr */
+	fdata->cr_offset = SIGNED_SHORT (op) + offset;
+	cr_reg = 0;
+	continue;
+
+      } else if (op == 0x48000005) {			/* bl .+4 used in 
+							   -mrelocatable */
+	continue;
+
+      } else if (op == 0x48000004) {			/* b .+4 (xlc) */
+	break;
+
+      } else if (((op & 0xffff0000) == 0x801e0000 ||	/* lwz 0,NUM(r30), used
+							   in V.4 -mrelocatable */
+		  op == 0x7fc0f214) &&			/* add r30,r0,r30, used
+							   in V.4 -mrelocatable */
+		 lr_reg == 0x901e0000) {
+	continue;
+
+      } else if ((op & 0xffff0000) == 0x3fc00000 ||	/* addis 30,0,foo@ha, used
+							   in V.4 -mminimal-toc */
+		 (op & 0xffff0000) == 0x3bde0000) {	/* addi 30,30,foo@l */
+	continue;
+
+      } else if ((op & 0xfc000000) == 0x48000000) {	/* bl foo, 
+							   to save fprs??? */
+
+	fdata->frameless = 0;
+	/* Don't skip over the subroutine call if it is not within the first
+	   three instructions of the prologue.  */
+	if ((pc - orig_pc) > 8)
+	  break;
+
+	op = read_memory_integer (pc+4, 4);
+
+	/* At this point, make sure this is not a trampoline function
+	   (a function that simply calls another functions, and nothing else).
+	   If the next is not a nop, this branch was part of the function
+	   prologue. */
+
+	if (op == 0x4def7b82 || op == 0)		/* crorc 15, 15, 15 */
+	  break;					/* don't skip over 
+							   this branch */
+	continue;
+
+      /* update stack pointer */
+      } else if ((op & 0xffff0000) == 0x94210000) {	/* stu r1,NUM(r1) */
+	fdata->frameless = 0;
+	fdata->offset = SIGNED_SHORT (op);
+	offset = fdata->offset;
+	continue;
+
+      } else if (op == 0x7c21016e) {			/* stwux 1,1,0 */
+	fdata->frameless = 0;
+	offset = fdata->offset;
+	continue;
+
+      /* Load up minimal toc pointer */
+      } else if ((op >> 22) == 0x20f
+	         && ! minimal_toc_loaded) {	/* l r31,... or l r30,... */
+	minimal_toc_loaded = 1;
+	continue;
+
+      /* store parameters in stack */
+      } else if ((op & 0xfc1f0000) == 0x90010000 ||	/* st rx,NUM(r1) */
+		 (op & 0xfc1f0000) == 0xd8010000 ||	/* stfd Rx,NUM(r1) */
+		 (op & 0xfc1f0000) == 0xfc010000) {	/* frsp, fp?,NUM(r1) */
+	continue;
+
+      /* store parameters in stack via frame pointer */
+      } else if (framep &&
+		 ((op & 0xfc1f0000) == 0x901f0000 ||	/* st rx,NUM(r1) */
+		 (op & 0xfc1f0000) == 0xd81f0000 ||	/* stfd Rx,NUM(r1) */
+		 (op & 0xfc1f0000) == 0xfc1f0000)) {	/* frsp, fp?,NUM(r1) */
+	continue;
+
+      /* Set up frame pointer */
+      } else if (op == 0x603f0000			/* oril r31, r1, 0x0 */
+		 || op == 0x7c3f0b78) {			/* mr r31, r1 */
+	fdata->frameless = 0;
+	framep = 1;
+	fdata->alloca_reg = 31;
+	continue;
+
+      /* Another way to set up the frame pointer.  */
+      } else if ((op & 0xfc1fffff) == 0x38010000) {	/* addi rX, r1, 0x0 */
+	fdata->frameless = 0;
+	framep = 1;
+	fdata->alloca_reg = (op & ~0x38010000) >> 21;
+	continue;
+
+      } else {
+	break;
+      }
+    }
+
+#if 0
+/* I have problems with skipping over __main() that I need to address
+ * sometime. Previously, I used to use misc_function_vector which
+ * didn't work as well as I wanted to be.  -MGO */
+
+  /* If the first thing after skipping a prolog is a branch to a function,
+     this might be a call to an initializer in main(), introduced by gcc2.
+     We'd like to skip over it as well. Fortunately, xlc does some extra
+     work before calling a function right after a prologue, thus we can
+     single out such gcc2 behaviour. */
+     
+
+  if ((op & 0xfc000001) == 0x48000001) { /* bl foo, an initializer function? */
+    op = read_memory_integer (pc+4, 4);
+
+    if (op == 0x4def7b82) {		/* cror 0xf, 0xf, 0xf (nop) */
+
+      /* check and see if we are in main. If so, skip over this initializer
+         function as well. */
+
+      tmp = find_pc_misc_function (pc);
+      if (tmp >= 0 && STREQ (misc_function_vector [tmp].name, "main"))
+        return pc + 8;
+    }
+  }
+#endif /* 0 */
+ 
+  fdata->offset = - fdata->offset;
+  return pc;
+}
+
+
+/*************************************************************************
+  Support for creating pushind a dummy frame into the stack, and popping
+  frames, etc. 
+*************************************************************************/
+
+/* The total size of dummy frame is 436, which is;
+
+	32 gpr's	- 128 bytes
+	32 fpr's	- 256   "
+	7  the rest	- 28    "
+	and 24 extra bytes for the callee's link area. The last 24 bytes
+	for the link area might not be necessary, since it will be taken
+	care of by push_arguments(). */
+
+#define DUMMY_FRAME_SIZE 436
+
+#define	DUMMY_FRAME_ADDR_SIZE 10
+
+/* Make sure you initialize these in somewhere, in case gdb gives up what it
+   was debugging and starts debugging something else. FIXMEibm */
+
+static int dummy_frame_count = 0;
+static int dummy_frame_size = 0;
+static CORE_ADDR *dummy_frame_addr = 0;
+
+extern int stop_stack_dummy;
+
+/* push a dummy frame into stack, save all register. Currently we are saving
+   only gpr's and fpr's, which is not good enough! FIXMEmgo */
+   
+void
+push_dummy_frame ()
+{
+  /* stack pointer.  */
+  CORE_ADDR sp;
+  /* Same thing, target byte order.  */
+  char sp_targ[4];
+
+  /* link register.  */
+  CORE_ADDR pc;
+  /* Same thing, target byte order.  */
+  char pc_targ[4];
+  
+  /* Needed to figure out where to save the dummy link area.
+     FIXME: There should be an easier way to do this, no?  tiemann 9/9/95.  */
+  struct rs6000_framedata fdata;
+
+  int ii;
+
+  target_fetch_registers (-1);
+
+  if (dummy_frame_count >= dummy_frame_size) {
+    dummy_frame_size += DUMMY_FRAME_ADDR_SIZE;
+    if (dummy_frame_addr)
+      dummy_frame_addr = (CORE_ADDR*) xrealloc 
+        (dummy_frame_addr, sizeof(CORE_ADDR) * (dummy_frame_size));
+    else
+      dummy_frame_addr = (CORE_ADDR*) 
+	xmalloc (sizeof(CORE_ADDR) * (dummy_frame_size));
+  }
+  
+  sp = read_register(SP_REGNUM);
+  pc = read_register(PC_REGNUM);
+  store_address (pc_targ, 4, pc);
+
+  skip_prologue (get_pc_function_start (pc), &fdata);
+
+  dummy_frame_addr [dummy_frame_count++] = sp;
+
+  /* Be careful! If the stack pointer is not decremented first, then kernel 
+     thinks he is free to use the space underneath it. And kernel actually 
+     uses that area for IPC purposes when executing ptrace(2) calls. So 
+     before writing register values into the new frame, decrement and update
+     %sp first in order to secure your frame. */
+
+  /* FIXME: We don't check if the stack really has this much space.
+     This is a problem on the ppc simulator (which only grants one page
+     (4096 bytes) by default.  */
+
+  write_register (SP_REGNUM, sp-DUMMY_FRAME_SIZE);
+
+  /* gdb relies on the state of current_frame. We'd better update it,
+     otherwise things like do_registers_info() wouldn't work properly! */
+
+  flush_cached_frames ();
+
+  /* save program counter in link register's space. */
+  write_memory (sp + (fdata.lr_offset ? fdata.lr_offset : DEFAULT_LR_SAVE),
+	        pc_targ, 4);
+
+  /* save all floating point and general purpose registers here. */
+
+  /* fpr's, f0..f31 */
+  for (ii = 0; ii < 32; ++ii)
+    write_memory (sp-8-(ii*8), &registers[REGISTER_BYTE (31-ii+FP0_REGNUM)], 8);
+
+  /* gpr's r0..r31 */
+  for (ii=1; ii <=32; ++ii)
+    write_memory (sp-256-(ii*4), &registers[REGISTER_BYTE (32-ii)], 4);
+
+  /* so far, 32*2 + 32 words = 384 bytes have been written. 
+     7 extra registers in our register set: pc, ps, cnd, lr, cnt, xer, mq */
+
+  for (ii=1; ii <= (LAST_UISA_SP_REGNUM-FIRST_UISA_SP_REGNUM+1); ++ii) {
+    write_memory (sp-384-(ii*4), 
+		  &registers[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
+  }
+
+  /* Save sp or so called back chain right here. */
+  store_address (sp_targ, 4, sp);
+  write_memory (sp-DUMMY_FRAME_SIZE, sp_targ, 4);
+  sp -= DUMMY_FRAME_SIZE;
+
+  /* And finally, this is the back chain. */
+  write_memory (sp+8, pc_targ, 4);
+}
+
+
+/* Pop a dummy frame.
+
+   In rs6000 when we push a dummy frame, we save all of the registers. This
+   is usually done before user calls a function explicitly.
+
+   After a dummy frame is pushed, some instructions are copied into stack,
+   and stack pointer is decremented even more.  Since we don't have a frame
+   pointer to get back to the parent frame of the dummy, we start having
+   trouble poping it.  Therefore, we keep a dummy frame stack, keeping
+   addresses of dummy frames as such.  When poping happens and when we
+   detect that was a dummy frame, we pop it back to its parent by using
+   dummy frame stack (`dummy_frame_addr' array). 
+
+FIXME:  This whole concept is broken.  You should be able to detect
+a dummy stack frame *on the user's stack itself*.  When you do,
+then you know the format of that stack frame -- including its
+saved SP register!  There should *not* be a separate stack in the
+GDB process that keeps track of these dummy frames!  -- gnu@cygnus.com Aug92
+ */
+   
+static void
+pop_dummy_frame ()
+{
+  CORE_ADDR sp, pc;
+  int ii;
+  sp = dummy_frame_addr [--dummy_frame_count];
+
+  /* restore all fpr's. */
+  for (ii = 1; ii <= 32; ++ii)
+    read_memory (sp-(ii*8), &registers[REGISTER_BYTE (32-ii+FP0_REGNUM)], 8);
+
+  /* restore all gpr's */
+  for (ii=1; ii <= 32; ++ii) {
+    read_memory (sp-256-(ii*4), &registers[REGISTER_BYTE (32-ii)], 4);
+  }
+
+  /* restore the rest of the registers. */
+  for (ii=1; ii <=(LAST_UISA_SP_REGNUM-FIRST_UISA_SP_REGNUM+1); ++ii)
+    read_memory (sp-384-(ii*4),
+    		&registers[REGISTER_BYTE (FPLAST_REGNUM + ii)], 4);
+
+  read_memory (sp-(DUMMY_FRAME_SIZE-8), 
+	       &registers [REGISTER_BYTE(PC_REGNUM)], 4);
+
+  /* when a dummy frame was being pushed, we had to decrement %sp first, in 
+     order to secure astack space. Thus, saved %sp (or %r1) value, is not the
+     one we should restore. Change it with the one we need. */
+
+  memcpy (&registers [REGISTER_BYTE(FP_REGNUM)], (char *) &sp, sizeof (int));
+
+  /* Now we can restore all registers. */
+
+  target_store_registers (-1);
+  pc = read_pc ();
+  flush_cached_frames ();
+}
+
+
+/* pop the innermost frame, go back to the caller. */
+
+void
+pop_frame ()
+{
+  CORE_ADDR pc, lr, sp, prev_sp;		/* %pc, %lr, %sp */
+  struct rs6000_framedata fdata;
+  struct frame_info *frame = get_current_frame ();
+  int addr, ii;
+
+  pc = read_pc ();
+  sp = FRAME_FP (frame);
+
+  if (stop_stack_dummy)
+    {
+#ifdef USE_GENERIC_DUMMY_FRAMES
+      generic_pop_dummy_frame ();
+      flush_cached_frames ();
+      return;
+#else
+      if (dummy_frame_count) 
+	pop_dummy_frame ();
+      return;
+#endif
+    }
+
+  /* Make sure that all registers are valid.  */
+  read_register_bytes (0, NULL, REGISTER_BYTES);
+
+  /* figure out previous %pc value. If the function is frameless, it is 
+     still in the link register, otherwise walk the frames and retrieve the
+     saved %pc value in the previous frame. */
+
+  addr = get_pc_function_start (frame->pc);
+  (void) skip_prologue (addr, &fdata);
+
+  if (fdata.frameless)
+    prev_sp = sp;
+  else
+    prev_sp = read_memory_integer (sp, 4);
+  if (fdata.lr_offset == 0)
+    lr = read_register (LR_REGNUM);
+  else
+    lr = read_memory_integer (prev_sp + fdata.lr_offset, 4);
+
+  /* reset %pc value. */
+  write_register (PC_REGNUM, lr);
+
+  /* reset register values if any was saved earlier. */
+
+  if (fdata.saved_gpr != -1)
+    {
+      addr = prev_sp + fdata.gpr_offset;
+      for (ii = fdata.saved_gpr; ii <= 31; ++ii) {
+	read_memory (addr, &registers [REGISTER_BYTE (ii)], 4);
+	addr += 4;
+      }
+    }
+
+  if (fdata.saved_fpr != -1)
+    {
+      addr = prev_sp + fdata.fpr_offset;
+      for (ii = fdata.saved_fpr; ii <= 31; ++ii) {
+	read_memory (addr, &registers [REGISTER_BYTE (ii+FP0_REGNUM)], 8);
+	addr += 8;
+      }
+    }
+
+  write_register (SP_REGNUM, prev_sp);
+  target_store_registers (-1);
+  flush_cached_frames ();
+}
+
+/* fixup the call sequence of a dummy function, with the real function address.
+   its argumets will be passed by gdb. */
+
+void
+rs6000_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p)
+     char *dummyname;
+     CORE_ADDR pc;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+#define	TOC_ADDR_OFFSET		20
+#define	TARGET_ADDR_OFFSET	28
+
+  int ii;
+  CORE_ADDR target_addr;
+
+  if (find_toc_address_hook != NULL)
+    {
+      CORE_ADDR tocvalue;
+
+      tocvalue = (*find_toc_address_hook) (fun);
+      ii  = *(int*)((char*)dummyname + TOC_ADDR_OFFSET);
+      ii = (ii & 0xffff0000) | (tocvalue >> 16);
+      *(int*)((char*)dummyname + TOC_ADDR_OFFSET) = ii;
+
+      ii  = *(int*)((char*)dummyname + TOC_ADDR_OFFSET+4);
+      ii = (ii & 0xffff0000) | (tocvalue & 0x0000ffff);
+      *(int*)((char*)dummyname + TOC_ADDR_OFFSET+4) = ii;
+    }
+
+  target_addr = fun;
+  ii  = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET);
+  ii = (ii & 0xffff0000) | (target_addr >> 16);
+  *(int*)((char*)dummyname + TARGET_ADDR_OFFSET) = ii;
+
+  ii  = *(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4);
+  ii = (ii & 0xffff0000) | (target_addr & 0x0000ffff);
+  *(int*)((char*)dummyname + TARGET_ADDR_OFFSET+4) = ii;
+}
+
+/* Pass the arguments in either registers, or in the stack. In RS6000,
+   the first eight words of the argument list (that might be less than
+   eight parameters if some parameters occupy more than one word) are
+   passed in r3..r11 registers.  float and double parameters are
+   passed in fpr's, in addition to that. Rest of the parameters if any
+   are passed in user stack. There might be cases in which half of the
+   parameter is copied into registers, the other half is pushed into
+   stack.
+
+   If the function is returning a structure, then the return address is passed
+   in r3, then the first 7 words of the parameters can be passed in registers,
+   starting from r4. */
+
+CORE_ADDR
+push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  int ii;
+  int len = 0;
+  int argno;					/* current argument number */
+  int argbytes;					/* current argument byte */
+  char tmp_buffer [50];
+  int f_argno = 0;				/* current floating point argno */
+
+  value_ptr arg = 0;
+  struct type *type;
+
+  CORE_ADDR saved_sp;
+
+#ifndef USE_GENERIC_DUMMY_FRAMES
+  if ( dummy_frame_count <= 0)
+    printf_unfiltered ("FATAL ERROR -push_arguments()! frame not found!!\n");
+#endif	/* GENERIC_DUMMY_FRAMES */
+
+  /* The first eight words of ther arguments are passed in registers. Copy
+     them appropriately.
+
+     If the function is returning a `struct', then the first word (which 
+     will be passed in r3) is used for struct return address. In that
+     case we should advance one word and start from r4 register to copy 
+     parameters. */
+
+  ii =  struct_return ? 1 : 0;
+
+/* 
+effectively indirect call... gcc does...
+
+return_val example( float, int);
+
+eabi: 
+    float in fp0, int in r3
+    offset of stack on overflow 8/16
+    for varargs, must go by type.
+power open:
+    float in r3&r4, int in r5
+    offset of stack on overflow different 
+both: 
+    return in r3 or f0.  If no float, must study how gcc emulates floats;
+    pay attention to arg promotion.  
+    User may have to cast\args to handle promotion correctly 
+    since gdb won't know if prototype supplied or not.
+*/
+
+  for (argno=0, argbytes=0; argno < nargs && ii<8; ++ii) {
+
+    arg = args[argno];
+    type = check_typedef (VALUE_TYPE (arg));
+    len = TYPE_LENGTH (type);
+
+    if (TYPE_CODE (type) == TYPE_CODE_FLT) {
+
+      /* floating point arguments are passed in fpr's, as well as gpr's.
+         There are 13 fpr's reserved for passing parameters. At this point
+         there is no way we would run out of them. */
+
+      if (len > 8)
+        printf_unfiltered (
+"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
+
+      memcpy (&registers[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], 
+	      VALUE_CONTENTS (arg), 
+	      len);
+      ++f_argno;
+    }
+
+    if (len > 4) {
+
+      /* Argument takes more than one register. */
+      while (argbytes < len) {
+	memset (&registers[REGISTER_BYTE(ii+3)], 0, sizeof(int));
+	memcpy (&registers[REGISTER_BYTE(ii+3)], 
+		((char*)VALUE_CONTENTS (arg))+argbytes, 
+		(len - argbytes) > 4 ? 4 : len - argbytes);
+	++ii, argbytes += 4;
+
+	if (ii >= 8)
+	  goto ran_out_of_registers_for_arguments;
+      }
+      argbytes = 0;
+      --ii;
+    }
+    else {        /* Argument can fit in one register. No problem. */
+      memset (&registers[REGISTER_BYTE(ii+3)], 0, sizeof(int));
+      memcpy (&registers[REGISTER_BYTE(ii+3)], VALUE_CONTENTS (arg), len);
+    }
+    ++argno;
+  }
+
+ran_out_of_registers_for_arguments:
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+  saved_sp = read_sp ();
+#else
+  /* location for 8 parameters are always reserved. */
+  sp -= 4 * 8;
+
+  /* another six words for back chain, TOC register, link register, etc. */
+  sp -= 24;
+#endif	/* GENERIC_DUMMY_FRAMES */
+  /* if there are more arguments, allocate space for them in 
+     the stack, then push them starting from the ninth one. */
+
+  if ((argno < nargs) || argbytes) {
+    int space = 0, jj;
+
+    if (argbytes) {
+      space += ((len - argbytes + 3) & -4);
+      jj = argno + 1;
+    }
+    else
+      jj = argno;
+
+    for (; jj < nargs; ++jj) {
+      value_ptr val = args[jj];
+      space += ((TYPE_LENGTH (VALUE_TYPE (val))) + 3) & -4;
+    }
+
+    /* add location required for the rest of the parameters */
+    space = (space + 7) & -8;
+    sp -= space;
+
+    /* This is another instance we need to be concerned about securing our
+	stack space. If we write anything underneath %sp (r1), we might conflict
+	with the kernel who thinks he is free to use this area. So, update %sp
+	first before doing anything else. */
+
+    write_register (SP_REGNUM, sp);
+
+    /* if the last argument copied into the registers didn't fit there 
+       completely, push the rest of it into stack. */
+
+    if (argbytes) {
+      write_memory (sp+24+(ii*4), 
+		    ((char*)VALUE_CONTENTS (arg))+argbytes, 
+		    len - argbytes);
+      ++argno;
+      ii += ((len - argbytes + 3) & -4) / 4;
+    }
+
+    /* push the rest of the arguments into stack. */
+    for (; argno < nargs; ++argno) {
+
+      arg = args[argno];
+      type = check_typedef (VALUE_TYPE (arg));
+      len = TYPE_LENGTH (type);
+
+
+      /* float types should be passed in fpr's, as well as in the stack. */
+      if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13) {
+
+        if (len > 8)
+          printf_unfiltered (
+"Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno);
+
+        memcpy (&registers[REGISTER_BYTE(FP0_REGNUM + 1 + f_argno)], 
+		VALUE_CONTENTS (arg), 
+		len);
+        ++f_argno;
+      }
+
+      write_memory (sp+24+(ii*4), (char *) VALUE_CONTENTS (arg), len);
+      ii += ((len + 3) & -4) / 4;
+    }
+  }
+  else
+    /* Secure stack areas first, before doing anything else. */
+    write_register (SP_REGNUM, sp);
+
+#ifndef USE_GENERIC_DUMMY_FRAMES
+/* we want to copy 24 bytes of target's frame to dummy's frame,
+   then set back chain to point to new frame. */
+
+  saved_sp = dummy_frame_addr [dummy_frame_count - 1];
+  read_memory (saved_sp, tmp_buffer, 24);
+  write_memory (sp, tmp_buffer, 24);
+#endif	/* GENERIC_DUMMY_FRAMES */
+
+  /* set back chain properly */
+  store_address (tmp_buffer, 4, saved_sp);
+  write_memory (sp, tmp_buffer, 4);
+
+  target_store_registers (-1);
+  return sp;
+}
+#ifdef ELF_OBJECT_FORMAT
+
+/* Function: ppc_push_return_address (pc, sp)
+   Set up the return address for the inferior function call. */
+
+CORE_ADDR                                      
+ppc_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  write_register (LR_REGNUM, CALL_DUMMY_ADDRESS ());
+  return sp;
+}
+
+#endif
+
+/* a given return value in `regbuf' with a type `valtype', extract and copy its
+   value into `valbuf' */
+
+void
+extract_return_value (valtype, regbuf, valbuf)
+     struct type *valtype;
+     char regbuf[REGISTER_BYTES];
+     char *valbuf;
+{
+  int offset = 0;
+
+  if (TYPE_CODE (valtype) == TYPE_CODE_FLT) {
+
+    double dd; float ff;
+    /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
+       We need to truncate the return value into float size (4 byte) if
+       necessary. */
+
+    if (TYPE_LENGTH (valtype) > 4) 		/* this is a double */
+      memcpy (valbuf, 
+	      &regbuf[REGISTER_BYTE (FP0_REGNUM + 1)],
+	      TYPE_LENGTH (valtype));
+    else {		/* float */
+      memcpy (&dd, &regbuf[REGISTER_BYTE (FP0_REGNUM + 1)], 8);
+      ff = (float)dd;
+      memcpy (valbuf, &ff, sizeof(float));
+    }
+  }
+  else {
+    /* return value is copied starting from r3. */
+    if (TARGET_BYTE_ORDER == BIG_ENDIAN
+	&& TYPE_LENGTH (valtype) < REGISTER_RAW_SIZE (3))
+      offset = REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype);
+
+    memcpy (valbuf, 
+	    regbuf + REGISTER_BYTE (3) + offset,
+	    TYPE_LENGTH (valtype));
+  }
+}
+
+
+/* keep structure return address in this variable.
+   FIXME:  This is a horrid kludge which should not be allowed to continue
+   living.  This only allows a single nested call to a structure-returning
+   function.  Come on, guys!  -- gnu@cygnus.com, Aug 92  */
+
+CORE_ADDR rs6000_struct_return_address;
+
+
+/* Indirect function calls use a piece of trampoline code to do context
+   switching, i.e. to set the new TOC table. Skip such code if we are on
+   its first instruction (as when we have single-stepped to here). 
+   Also skip shared library trampoline code (which is different from
+   indirect function call trampolines).
+   Result is desired PC to step until, or NULL if we are not in
+   trampoline code.  */
+
+CORE_ADDR
+skip_trampoline_code (pc)
+     CORE_ADDR pc;
+{
+  register unsigned int ii, op;
+  CORE_ADDR solib_target_pc;
+
+  static unsigned trampoline_code[] = {
+	0x800b0000,			/*     l   r0,0x0(r11)	*/
+	0x90410014,			/*    st   r2,0x14(r1)	*/
+	0x7c0903a6,			/* mtctr   r0		*/
+	0x804b0004,			/*     l   r2,0x4(r11)	*/
+	0x816b0008,			/*     l  r11,0x8(r11)	*/
+	0x4e800420,			/*  bctr		*/
+	0x4e800020,			/*    br		*/
+	0
+  };
+
+  /* If pc is in a shared library trampoline, return its target.  */
+  solib_target_pc = find_solib_trampoline_target (pc);
+  if (solib_target_pc)
+    return solib_target_pc;
+
+  for (ii=0; trampoline_code[ii]; ++ii) {
+    op  = read_memory_integer (pc + (ii*4), 4);
+    if (op != trampoline_code [ii])
+      return 0;
+  }
+  ii = read_register (11);		/* r11 holds destination addr	*/
+  pc = read_memory_integer (ii, 4);	/* (r11) value			*/
+  return pc;
+}
+
+/* Determines whether the function FI has a frame on the stack or not.  */
+
+int
+frameless_function_invocation (fi)
+     struct frame_info *fi;
+{
+  CORE_ADDR func_start;
+  struct rs6000_framedata fdata;
+
+  /* Don't even think about framelessness except on the innermost frame
+     or if the function was interrupted by a signal.  */
+  if (fi->next != NULL && !fi->next->signal_handler_caller)
+    return 0;
+  
+  func_start = get_pc_function_start (fi->pc);
+
+  /* If we failed to find the start of the function, it is a mistake
+     to inspect the instructions. */
+
+  if (!func_start)
+    {
+      /* A frame with a zero PC is usually created by dereferencing a NULL
+	 function pointer, normally causing an immediate core dump of the
+	 inferior. Mark function as frameless, as the inferior has no chance
+	 of setting up a stack frame.  */
+      if (fi->pc == 0)
+	return 1;
+      else
+	return 0;
+    }
+
+  (void) skip_prologue (func_start, &fdata);
+  return fdata.frameless;
+}
+
+/* Return the PC saved in a frame */
+
+unsigned long
+frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  CORE_ADDR func_start;
+  struct rs6000_framedata fdata;
+
+  if (fi->signal_handler_caller)
+    return read_memory_integer (fi->frame + SIG_FRAME_PC_OFFSET, 4);
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM);
+#endif	/* GENERIC_DUMMY_FRAMES */
+
+  func_start = get_pc_function_start (fi->pc);
+
+  /* If we failed to find the start of the function, it is a mistake
+     to inspect the instructions. */
+  if (!func_start)
+    return 0;
+
+  (void) skip_prologue (func_start, &fdata);
+
+  if (fdata.lr_offset == 0 && fi->next != NULL)
+    {
+      if (fi->next->signal_handler_caller)
+	return read_memory_integer (fi->next->frame + SIG_FRAME_LR_OFFSET, 4);
+      else
+	return read_memory_integer (rs6000_frame_chain (fi) + DEFAULT_LR_SAVE,
+				    4);
+    }
+
+  if (fdata.lr_offset == 0)
+    return read_register (LR_REGNUM);
+
+  return read_memory_integer (rs6000_frame_chain (fi) + fdata.lr_offset, 4);
+}
+
+/* If saved registers of frame FI are not known yet, read and cache them.
+   &FDATAP contains rs6000_framedata; TDATAP can be NULL,
+   in which case the framedata are read.  */
+
+static void
+frame_get_saved_regs (fi, fdatap)
+     struct frame_info *fi;
+     struct rs6000_framedata *fdatap;
+{
+  int ii;
+  CORE_ADDR frame_addr; 
+  struct rs6000_framedata work_fdata;
+
+  if (fi->saved_regs)
+    return;
+  
+  if (fdatap == NULL)
+    {
+      fdatap = &work_fdata;
+      (void) skip_prologue (get_pc_function_start (fi->pc), fdatap);
+    }
+
+  frame_saved_regs_zalloc (fi);
+
+  /* If there were any saved registers, figure out parent's stack
+     pointer. */
+  /* The following is true only if the frame doesn't have a call to
+     alloca(), FIXME. */
+
+  if (fdatap->saved_fpr == 0 && fdatap->saved_gpr == 0
+      && fdatap->lr_offset == 0 && fdatap->cr_offset == 0)
+    frame_addr = 0;
+  else if (fi->prev && fi->prev->frame)
+    frame_addr = fi->prev->frame;
+  else
+    frame_addr = read_memory_integer (fi->frame, 4);
+  
+  /* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
+     All fpr's from saved_fpr to fp31 are saved.  */
+
+  if (fdatap->saved_fpr >= 0)
+    {
+      int i;
+      int fpr_offset = frame_addr + fdatap->fpr_offset;
+      for (i = fdatap->saved_fpr; i < 32; i++)
+	{
+	  fi->saved_regs [FP0_REGNUM + i] = fpr_offset;
+	  fpr_offset += 8;
+	}
+    }
+
+  /* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
+     All gpr's from saved_gpr to gpr31 are saved.  */
+
+  if (fdatap->saved_gpr >= 0)
+    {
+      int i;
+      int gpr_offset = frame_addr + fdatap->gpr_offset;
+      for (i = fdatap->saved_gpr; i < 32; i++)
+	{
+	  fi->saved_regs [i] = gpr_offset;
+	  gpr_offset += 4;
+	}
+    }
+
+  /* If != 0, fdatap->cr_offset is the offset from the frame that holds
+     the CR.  */
+  if (fdatap->cr_offset != 0)
+    fi->saved_regs [CR_REGNUM] = frame_addr + fdatap->cr_offset;
+
+  /* If != 0, fdatap->lr_offset is the offset from the frame that holds
+     the LR.  */
+  if (fdatap->lr_offset != 0)
+    fi->saved_regs [LR_REGNUM] = frame_addr + fdatap->lr_offset;
+}
+
+/* Return the address of a frame. This is the inital %sp value when the frame
+   was first allocated. For functions calling alloca(), it might be saved in
+   an alloca register. */
+
+static CORE_ADDR
+frame_initial_stack_address (fi)
+     struct frame_info *fi;
+{
+  CORE_ADDR tmpaddr;
+  struct rs6000_framedata fdata;
+  struct frame_info *callee_fi;
+
+  /* if the initial stack pointer (frame address) of this frame is known,
+     just return it. */
+
+  if (fi->extra_info->initial_sp)
+    return fi->extra_info->initial_sp;
+
+  /* find out if this function is using an alloca register.. */
+
+  (void) skip_prologue (get_pc_function_start (fi->pc), &fdata);
+
+  /* if saved registers of this frame are not known yet, read and cache them. */
+
+  if (!fi->saved_regs)
+    frame_get_saved_regs (fi, &fdata);
+
+  /* If no alloca register used, then fi->frame is the value of the %sp for
+     this frame, and it is good enough. */
+
+  if (fdata.alloca_reg < 0)
+    {
+      fi->extra_info->initial_sp = fi->frame;
+      return fi->extra_info->initial_sp;
+    }
+
+  /* This function has an alloca register. If this is the top-most frame
+     (with the lowest address), the value in alloca register is good. */
+
+  if (!fi->next)
+    return fi->extra_info->initial_sp = read_register (fdata.alloca_reg);     
+
+  /* Otherwise, this is a caller frame. Callee has usually already saved
+     registers, but there are exceptions (such as when the callee
+     has no parameters). Find the address in which caller's alloca
+     register is saved. */
+
+  for (callee_fi = fi->next; callee_fi; callee_fi = callee_fi->next) {
+
+    if (!callee_fi->saved_regs)
+      frame_get_saved_regs (callee_fi, NULL);
+
+    /* this is the address in which alloca register is saved. */
+
+    tmpaddr = callee_fi->saved_regs [fdata.alloca_reg];
+    if (tmpaddr) {
+      fi->extra_info->initial_sp = read_memory_integer (tmpaddr, 4); 
+      return fi->extra_info->initial_sp;
+    }
+
+    /* Go look into deeper levels of the frame chain to see if any one of
+       the callees has saved alloca register. */
+  }
+
+  /* If alloca register was not saved, by the callee (or any of its callees)
+     then the value in the register is still good. */
+
+  fi->extra_info->initial_sp = read_register (fdata.alloca_reg);
+  return fi->extra_info->initial_sp;
+}
+
+CORE_ADDR
+rs6000_frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+  CORE_ADDR fp;
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+  if (PC_IN_CALL_DUMMY (thisframe->pc, thisframe->frame, thisframe->frame))
+    return thisframe->frame;	/* dummy frame same as caller's frame */
+#endif	/* GENERIC_DUMMY_FRAMES */
+
+  if (inside_entry_file (thisframe->pc) || 
+      thisframe->pc == entry_point_address ())
+    return 0;
+
+  if (thisframe->signal_handler_caller)
+    fp = read_memory_integer (thisframe->frame + SIG_FRAME_FP_OFFSET, 4);
+  else if (thisframe->next != NULL
+	   && thisframe->next->signal_handler_caller
+	   && frameless_function_invocation (thisframe))
+    /* A frameless function interrupted by a signal did not change the
+       frame pointer.  */
+    fp = FRAME_FP (thisframe);
+  else
+    fp = read_memory_integer ((thisframe)->frame, 4);
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+  {
+    CORE_ADDR fpp, lr;
+
+    lr = read_register (LR_REGNUM);
+    if (lr == entry_point_address ())
+      if (fp != 0 && (fpp = read_memory_integer (fp, 4)) != 0)
+	if (PC_IN_CALL_DUMMY (lr, fpp, fpp))
+	  return fpp;
+  }
+#endif	/* GENERIC_DUMMY_FRAMES */
+  return fp;
+}
+
+/* Return nonzero if ADDR (a function pointer) is in the data space and
+   is therefore a special function pointer.  */
+
+int
+is_magic_function_pointer (addr)
+     CORE_ADDR addr;
+{
+  struct obj_section *s;
+
+  s = find_pc_section (addr);
+  if (s && s->the_bfd_section->flags & SEC_CODE)
+    return 0;
+  else
+    return 1;
+}
+
+#ifdef GDB_TARGET_POWERPC
+int
+gdb_print_insn_powerpc (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return print_insn_big_powerpc (memaddr, info);
+  else
+    return print_insn_little_powerpc (memaddr, info);
+}
+#endif
+
+/* Function: get_saved_register
+   Just call the generic_get_saved_register function.  */
+
+#ifdef USE_GENERIC_DUMMY_FRAMES
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+#endif
+
+
+
+/* Handling the various PowerPC/RS6000 variants.  */
+
+
+/* The arrays here called register_names_MUMBLE hold names that 
+   the rs6000_register_name function returns.
+
+   For each family of PPC variants, I've tried to isolate out the
+   common registers and put them up front, so that as long as you get
+   the general family right, GDB will correctly identify the registers
+   common to that family.  The common register sets are:
+
+   For the 60x family: hid0 hid1 iabr dabr pir
+
+   For the 505 and 860 family: eie eid nri
+
+   For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi
+	tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1
+	pbu1 pbl2 pbu2
+
+   Most of these register groups aren't anything formal.  I arrived at
+   them by looking at the registers that occurred in more than one
+   processor.  */
+
+/* UISA register names common across all architectures, including POWER.  */
+
+#define COMMON_UISA_REG_NAMES \
+  /*  0 */ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",  \
+  /*  8 */ "r8", "r9", "r10","r11","r12","r13","r14","r15", \
+  /* 16 */ "r16","r17","r18","r19","r20","r21","r22","r23", \
+  /* 24 */ "r24","r25","r26","r27","r28","r29","r30","r31", \
+  /* 32 */ "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",  \
+  /* 40 */ "f8", "f9", "f10","f11","f12","f13","f14","f15", \
+  /* 48 */ "f16","f17","f18","f19","f20","f21","f22","f23", \
+  /* 56 */ "f24","f25","f26","f27","f28","f29","f30","f31", \
+  /* 64 */ "pc", "ps"
+
+/* UISA-level SPR names for PowerPC.  */
+#define PPC_UISA_SPR_NAMES \
+  /* 66 */ "cr",  "lr", "ctr", "xer", ""
+
+/* Segment register names, for PowerPC.  */
+#define PPC_SEGMENT_REG_NAMES \
+  /* 71 */ "sr0", "sr1", "sr2",  "sr3",  "sr4",  "sr5",  "sr6",  "sr7", \
+  /* 79 */ "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15"
+
+/* OEA SPR names for 32-bit PowerPC implementations.
+   The blank space is for "asr", which is only present on 64-bit
+   implementations.  */
+#define PPC_32_OEA_SPR_NAMES \
+  /*  87 */ "pvr", \
+  /*  88 */ "ibat0u", "ibat0l", "ibat1u", "ibat1l", \
+  /*  92 */ "ibat2u", "ibat2l", "ibat3u", "ibat3l", \
+  /*  96 */ "dbat0u", "dbat0l", "dbat1u", "dbat1l", \
+  /* 100 */ "dbat2u", "dbat2l", "dbat3u", "dbat3l", \
+  /* 104 */ "sdr1", "", "dar", "dsisr", "sprg0", "sprg1", "sprg2", "sprg3",\
+  /* 112 */ "srr0", "srr1", "tbl", "tbu", "dec", "dabr", "ear"
+
+/* For the RS6000, we only cover user-level SPR's.  */
+char *register_names_rs6000[] =
+{
+  COMMON_UISA_REG_NAMES,
+  /* 66 */ "cnd", "lr", "cnt", "xer", "mq"
+};
+
+/* a UISA-only view of the PowerPC.  */
+char *register_names_uisa[] =
+{
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES
+};
+
+char *register_names_403[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "icdbdr", "esr", "dear", "evpr", "cdbcr", "tsr", "tcr", "pit", 
+  /* 127 */ "tbhi", "tblo", "srr2", "srr3", "dbsr", "dbcr", "iac1", "iac2", 
+  /* 135 */ "dac1", "dac2", "dccr", "iccr", "pbl1", "pbu1", "pbl2", "pbu2"
+};
+
+char *register_names_403GC[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "icdbdr", "esr", "dear", "evpr", "cdbcr", "tsr", "tcr", "pit", 
+  /* 127 */ "tbhi", "tblo", "srr2", "srr3", "dbsr", "dbcr", "iac1", "iac2", 
+  /* 135 */ "dac1", "dac2", "dccr", "iccr", "pbl1", "pbu1", "pbl2", "pbu2", 
+  /* 143 */ "zpr", "pid", "sgr", "dcwr", "tbhu", "tblu"
+};
+
+char *register_names_505[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "eie", "eid", "nri"
+};
+
+char *register_names_860[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "eie", "eid", "nri", "cmpa", "cmpb", "cmpc", "cmpd", "icr", 
+  /* 127 */ "der", "counta", "countb", "cmpe", "cmpf", "cmpg", "cmph", 
+  /* 134 */ "lctrl1", "lctrl2", "ictrl", "bar", "ic_cst", "ic_adr", "ic_dat", 
+  /* 141 */ "dc_cst", "dc_adr", "dc_dat", "dpdr", "dpir", "immr", "mi_ctr", 
+  /* 148 */ "mi_ap", "mi_epn", "mi_twc", "mi_rpn", "md_ctr", "m_casid", 
+  /* 154 */ "md_ap", "md_epn", "md_twb", "md_twc", "md_rpn", "m_tw", 
+  /* 160 */ "mi_dbcam", "mi_dbram0", "mi_dbram1", "md_dbcam", "md_dbram0", 
+  /* 165 */ "md_dbram1"
+};
+
+/* Note that the 601 has different register numbers for reading and
+   writing RTCU and RTCL.  However, how one reads and writes a
+   register is the stub's problem.  */
+char *register_names_601[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "hid0", "hid1", "iabr", "dabr", "pir", "mq", "rtcu", 
+  /* 126 */ "rtcl"
+};
+
+char *register_names_602[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "hid0", "hid1", "iabr", "", "", "tcr", "ibr", "esassr", "sebr", 
+  /* 128 */ "ser", "sp", "lt"
+};
+
+char *register_names_603[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "hid0", "hid1", "iabr", "", "", "dmiss", "dcmp", "hash1", 
+  /* 127 */ "hash2", "imiss", "icmp", "rpa"
+};
+
+char *register_names_604[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "hid0", "hid1", "iabr", "dabr", "pir", "mmcr0", "pmc1", "pmc2", 
+  /* 127 */ "sia", "sda"
+};
+
+char *register_names_750[] =
+{ 
+  COMMON_UISA_REG_NAMES,
+  PPC_UISA_SPR_NAMES,
+  PPC_SEGMENT_REG_NAMES,
+  PPC_32_OEA_SPR_NAMES,
+  /* 119 */ "hid0", "hid1", "iabr", "dabr", "", "ummcr0", "upmc1", "upmc2", 
+  /* 127 */ "usia", "ummcr1", "upmc3", "upmc4", "mmcr0", "pmc1", "pmc2", 
+  /* 134 */ "sia", "mmcr1", "pmc3", "pmc4", "l2cr", "ictc", "thrm1", "thrm2", 
+  /* 142 */ "thrm3"
+};
+
+
+/* Information about a particular processor variant.  */
+struct variant
+{
+  /* Name of this variant.  */
+  char *name;
+
+  /* English description of the variant.  */
+  char *description;
+
+  /* Table of register names; registers[R] is the name of the register
+     number R.  */
+  int num_registers;
+  char **registers;
+};
+
+#define num_registers(list) (sizeof (list) / sizeof((list)[0]))
+
+
+/* Information in this table comes from the following web sites:
+   IBM:       http://www.chips.ibm.com:80/products/embedded/
+   Motorola:  http://www.mot.com/SPS/PowerPC/
+
+   I'm sure I've got some of the variant descriptions not quite right.
+   Please report any inaccuracies you find to GDB's maintainer.
+
+   If you add entries to this table, please be sure to allow the new
+   value as an argument to the --with-cpu flag, in configure.in.  */
+
+static struct variant
+variants[] =
+{
+  { "ppc-uisa", "PowerPC UISA - a PPC processor as viewed by user-level code",
+    num_registers (register_names_uisa),   register_names_uisa },
+  { "rs6000", "IBM RS6000 (\"POWER\") architecture, user-level view",
+    num_registers (register_names_rs6000), register_names_rs6000 },
+  { "403", "IBM PowerPC 403",
+    num_registers (register_names_403),   register_names_403 },
+  { "403GC", "IBM PowerPC 403GC",
+    num_registers (register_names_403GC), register_names_403GC },
+  { "505", "Motorola PowerPC 505",
+    num_registers (register_names_505),   register_names_505 },
+  { "860", "Motorola PowerPC 860 or 850",
+    num_registers (register_names_860),   register_names_860 },
+  { "601", "Motorola PowerPC 601",
+    num_registers (register_names_601),   register_names_601 },
+  { "602", "Motorola PowerPC 602",
+    num_registers (register_names_602),   register_names_602 },
+  { "603", "Motorola/IBM PowerPC 603 or 603e",
+    num_registers (register_names_603),   register_names_603 },
+  { "604", "Motorola PowerPC 604 or 604e",
+    num_registers (register_names_604),   register_names_604 },
+  { "750", "Motorola/IBM PowerPC 750 or 750",
+    num_registers (register_names_750),   register_names_750 },
+  { 0, 0, 0, 0 }
+};
+
+
+static struct variant *current_variant;
+
+char *
+rs6000_register_name (int i)
+{
+  if (i < 0 || i >= NUM_REGS)
+    error ("GDB bug: rs6000-tdep.c (rs6000_register_name): strange register number");
+
+  return ((i < current_variant->num_registers)
+	  ? current_variant->registers[i]
+	  : "");
+}
+
+
+static void
+install_variant (struct variant *v)
+{
+  current_variant = v;
+}
+
+
+/* Look up the variant named NAME in the `variants' table.  Return a
+   pointer to the struct variant, or null if we couldn't find it.  */
+static struct variant *
+find_variant_by_name (char *name)
+{
+  int i;
+  
+  for (i = 0; variants[i].name; i++)
+    if (! strcmp (name, variants[i].name))
+      return &variants[i];
+
+  return 0;
+}
+
+
+/* Install the PPC/RS6000 variant named NAME in the `variants' table.
+   Return zero if we installed it successfully, or a non-zero value if
+   we couldn't do it.
+
+   This might be useful to code outside this file, which doesn't want
+   to depend on the exact indices of the entries in the `variants'
+   table.  Just make it non-static if you want that.  */
+static int
+install_variant_by_name (char *name)
+{
+  struct variant *v = find_variant_by_name (name);
+
+  if (v)
+    {
+      install_variant (v);
+      return 0;
+    }
+  else
+    return 1;
+}
+
+
+static void
+list_variants ()
+{
+  int i;
+
+  printf_filtered ("GDB knows about the following PowerPC and RS6000 variants:\n");
+
+  for (i = 0; variants[i].name; i++)
+    printf_filtered ("  %-8s  %s\n",
+		     variants[i].name, variants[i].description);
+}
+
+
+static void
+show_current_variant ()
+{
+  printf_filtered ("PowerPC / RS6000 processor variant is set to `%s'.\n",
+		   current_variant->name);
+}
+
+
+static void
+set_processor (char *arg, int from_tty)
+{
+  int i;
+
+  if (! arg || arg[0] == '\0')
+    {
+      list_variants ();
+      return;
+    }
+
+  if (install_variant_by_name (arg))
+    {
+      error_begin ();
+      fprintf_filtered (gdb_stderr,
+			"`%s' is not a recognized PowerPC / RS6000 variant name.\n\n", arg);
+      list_variants ();
+      return_to_top_level (RETURN_ERROR);
+    }
+
+  show_current_variant ();
+}
+
+static void
+show_processor (char *arg, int from_tty)
+{
+  show_current_variant ();
+}
+
+
+
+/* Initialization code.  */
+
+void
+_initialize_rs6000_tdep ()
+{
+  /* FIXME, this should not be decided via ifdef. */
+#ifdef GDB_TARGET_POWERPC
+  tm_print_insn = gdb_print_insn_powerpc;
+#else
+  tm_print_insn = print_insn_rs6000;
+#endif
+
+  /* I don't think we should use the set/show command arrangement
+     here, because the way that's implemented makes it hard to do the
+     error checking we want in a reasonable way.  So we just add them
+     as two separate commands.  */
+  add_cmd ("processor", class_support, set_processor,
+	   "`set processor NAME' sets the PowerPC/RS6000 variant to NAME.\n\
+If you set this, GDB will know about the special-purpose registers that are\n\
+available on the given variant.\n\
+Type `set processor' alone for a list of recognized variant names.",
+	   &setlist);
+  add_cmd ("processor", class_support, show_processor,
+	   "Show the variant of the PowerPC or RS6000 processor in use.\n\
+Use `set processor' to change this.",
+	   &showlist);
+
+  /* Set the current PPC processor variant.  */
+  {
+    int status = 1;
+
+#ifdef TARGET_CPU_DEFAULT
+    status = install_variant_by_name (TARGET_CPU_DEFAULT);
+#endif
+
+    if (status)
+      {
+#ifdef GDB_TARGET_POWERPC
+	install_variant_by_name ("ppc-uisa");
+#else
+	install_variant_by_name ("rs6000");
+#endif
+      }
+  }
+}
diff --git a/gdb/saber.suppress b/gdb/saber.suppress
new file mode 100644
index 0000000..6dda1c5
--- /dev/null
+++ b/gdb/saber.suppress
@@ -0,0 +1,451 @@
+
+
+/* Options for project */
+unsetopt ansi
+setopt auto_compile
+unsetopt auto_reload
+setopt auto_replace
+unsetopt batch_load
+unsetopt batch_run
+unsetopt cc_prog
+setopt ccargs               -g
+unsetopt create_file
+unsetopt debug_child
+unsetopt echo
+setopt edit_jobs            5
+unsetopt eight_bit
+setopt line_edit
+setopt line_meta
+setopt lint_load            2
+setopt lint_run             2
+setopt list_action
+setopt load_flags           -I. -g -I.. -I../vx-share
+unsetopt long_not_int
+unsetopt make_args
+setopt make_hfiles
+unsetopt make_offset
+unsetopt make_prog
+setopt make_symbol          #
+setopt mem_config           16384
+unsetopt mem_trace
+setopt num_proc             1
+unsetopt page_cmds
+setopt page_list            19
+unsetopt page_load
+unsetopt path
+setopt proto_path           . /s2/saber_dir30/sun4-40/proto /s2/saber_dir30/sun4-40/../common/proto
+unsetopt preprocessor
+setopt program_name         a.out
+unsetopt print_custom
+setopt print_pointer
+setopt print_string         20
+unsetopt save_memory
+setopt sbrk_size            1048576
+setopt src_err              3
+setopt src_step             1
+setopt src_stop             3
+setopt sys_load_flags       -L/lib -L/usr/lib -L/usr/local/lib -I/usr/include -Dunix -Dsun -Dsparc
+unsetopt tab_stop
+unsetopt terse_suppress
+unsetopt terse_where
+setopt unset_value          191
+unsetopt win_fork_nodup
+setopt win_no_raise
+unsetopt win_message_list
+unsetopt win_project_list
+/* Suppressions for project */
+suppress 6 in read_huge_number 
+/* Over/underflow <plus> */
+suppress 8 in read_huge_number 
+/* Over/underflow <multiply> */
+suppress 22 
+/* Pointer subtraction */
+suppress 22 in free_all_psymtabs 
+/* Pointer subtraction */
+suppress 22 in free_all_symtabs 
+/* Pointer subtraction */
+suppress 56 in print_string 
+/* Information lost <function> */
+suppress 65 "../bfd/bfd.c":379 
+/* Too many function arguments */
+suppress 65 on printf_filtered 
+/* Too many function arguments */
+suppress 65 on fprintf_filtered 
+/* Too many function arguments */
+suppress 65 on vfprintf_filtered 
+/* Too many function arguments */
+suppress 65 on query 
+/* Too many function arguments */
+suppress 65 on fatal_dump_core 
+/* Too many function arguments */
+suppress 65 on fatal 
+/* Too many function arguments */
+suppress 65 on error 
+/* Too many function arguments */
+suppress 65 on noprocess 
+/* Too many function arguments */
+suppress 65 
+/* Too many function arguments */
+suppress 66 on say 
+/* Too few function arguments */
+suppress 66 on printf_filtered 
+/* Too few function arguments */
+suppress 66 on fprintf_filtered 
+/* Too few function arguments */
+suppress 66 on vfprintf_filtered 
+/* Too few function arguments */
+suppress 66 on query 
+/* Too few function arguments */
+suppress 66 on fatal_dump_core 
+/* Too few function arguments */
+suppress 66 on fatal 
+/* Too few function arguments */
+suppress 66 on error 
+/* Too few function arguments */
+suppress 67 on printf_filtered 
+/* Signed/unsigned argument mismatch */
+suppress 67 on fprintf_filtered 
+/* Signed/unsigned argument mismatch */
+suppress 67 on vfprintf_filtered 
+/* Signed/unsigned argument mismatch */
+suppress 67 on query 
+/* Signed/unsigned argument mismatch */
+suppress 67 on fatal_dump_core 
+/* Signed/unsigned argument mismatch */
+suppress 67 on fatal 
+/* Signed/unsigned argument mismatch */
+suppress 67 on error 
+/* Signed/unsigned argument mismatch */
+suppress 67 
+/* Signed/unsigned argument mismatch */
+suppress 68 on bfd_get_section_contents 
+/* Benign argument mismatch */
+suppress 68 on _do_getblong 
+/* Benign argument mismatch */
+suppress 68 on supply_register 
+/* Benign argument mismatch */
+suppress 68 on target_write_memory 
+/* Benign argument mismatch */
+suppress 68 on write_register_bytes 
+/* Benign argument mismatch */
+suppress 68 on read_register_bytes 
+/* Benign argument mismatch */
+suppress 68 on read_memory 
+/* Benign argument mismatch */
+suppress 68 on say 
+/* Benign argument mismatch */
+suppress 68 on printf_filtered 
+/* Benign argument mismatch */
+suppress 68 on fprintf_filtered 
+/* Benign argument mismatch */
+suppress 68 on vfprintf_filtered 
+/* Benign argument mismatch */
+suppress 68 on query 
+/* Benign argument mismatch */
+suppress 68 on fatal_dump_core 
+/* Benign argument mismatch */
+suppress 68 on fatal 
+/* Benign argument mismatch */
+suppress 68 on error 
+/* Benign argument mismatch */
+suppress 68 in find_solib 
+/* Benign argument mismatch */
+suppress 68 on child_wait 
+/* Benign argument mismatch */
+suppress 68 on xrealloc 
+/* Benign argument mismatch */
+suppress 68 on myread 
+/* Benign argument mismatch */
+suppress 68 in do_cleanups 
+/* Benign argument mismatch */
+suppress 68 on make_cleanup 
+/* Benign argument mismatch */
+suppress 68 on target_read_memory 
+/* Benign argument mismatch */
+suppress 69 on printf_filtered 
+/* Serious argument mismatch */
+suppress 69 on fprintf_filtered 
+/* Serious argument mismatch */
+suppress 69 on vfprintf_filtered 
+/* Serious argument mismatch */
+suppress 69 on query 
+/* Serious argument mismatch */
+suppress 69 on fatal_dump_core 
+/* Serious argument mismatch */
+suppress 69 on fatal 
+/* Serious argument mismatch */
+suppress 69 on error 
+/* Serious argument mismatch */
+suppress 70 on printf_filtered 
+/* Passing illegal enumeration value */
+suppress 70 on fprintf_filtered 
+/* Passing illegal enumeration value */
+suppress 70 on vfprintf_filtered 
+/* Passing illegal enumeration value */
+suppress 70 on query 
+/* Passing illegal enumeration value */
+suppress 70 on fatal_dump_core 
+/* Passing illegal enumeration value */
+suppress 70 on fatal 
+/* Passing illegal enumeration value */
+suppress 70 on error 
+/* Passing illegal enumeration value */
+suppress 80 on first_link_map_member 
+/* Returning invalid pointer */
+suppress 110 in printf_filtered 
+/* Signed/unsigned memory retrieval */
+suppress 110 in fprintf_filtered 
+/* Signed/unsigned memory retrieval */
+suppress 110 in vfprintf_filtered 
+/* Signed/unsigned memory retrieval */
+suppress 110 in query 
+/* Signed/unsigned memory retrieval */
+suppress 110 in fatal_dump_core 
+/* Signed/unsigned memory retrieval */
+suppress 110 in fatal 
+/* Signed/unsigned memory retrieval */
+suppress 110 in error 
+/* Signed/unsigned memory retrieval */
+suppress 112 in printf_filtered 
+/* Memory retrieval */
+suppress 112 in fprintf_filtered 
+/* Memory retrieval */
+suppress 112 in vfprintf_filtered 
+/* Memory retrieval */
+suppress 112 in query 
+/* Memory retrieval */
+suppress 112 in fatal_dump_core 
+/* Memory retrieval */
+suppress 112 in fatal 
+/* Memory retrieval */
+suppress 112 in error 
+/* Memory retrieval */
+suppress 112 
+/* Memory retrieval */
+suppress 112 ../symtab.c 
+/* Memory retrieval */
+suppress 112 in child_xfer_memory 
+/* Memory retrieval */
+suppress 165 in frame_saved_pc 
+/* Dereference */
+suppress 165 in get_prev_frame_info 
+/* Dereference */
+suppress 167 in get_prev_frame_info 
+/* Selection */
+suppress 167 in frame_saved_pc 
+/* Selection */
+suppress 442 in try_baudrate 
+/* Escape has null value */
+suppress 529 in read_range_type 
+/* Statement not reached */
+suppress 529 in process_one_symbol 
+/* Statement not reached */
+suppress 529 in unpack_double 
+/* Statement not reached */
+suppress 529 in wait_for_inferior 
+/* Statement not reached */
+suppress 529 in do_registers_info 
+/* Statement not reached */
+suppress 529 in value_from_register 
+/* Statement not reached */
+suppress 529 in solib_create_inferior_hook 
+/* Constant in conditional */
+suppress 530 
+/* Empty body of statement */
+suppress 546 in net_quit 
+/* Function exits through bottom */
+suppress 546 in net_wait 
+/* Function exits through bottom */
+suppress 546 in vx_remove_breakpoint 
+/* Function exits through bottom */
+suppress 546 in vx_insert_breakpoint 
+/* Function exits through bottom */
+suppress 546 in value_less 
+/* Function exits through bottom */
+suppress 546 in value_equal 
+/* Function exits through bottom */
+suppress 546 in unpack_long 
+/* Function exits through bottom */
+suppress 558 in solib_create_inferior_hook 
+/* Constant in conditional */
+suppress 558 in read_range_type 
+/* Constant in conditional */
+suppress 558 in process_one_symbol 
+/* Constant in conditional */
+suppress 558 in read_dbx_symtab 
+/* Constant in conditional */
+suppress 558 in vx_write_register 
+/* Constant in conditional */
+suppress 558 in vx_read_register 
+/* Constant in conditional */
+suppress 558 in unpack_double 
+/* Constant in conditional */
+suppress 558 in wait_for_inferior 
+/* Constant in conditional */
+suppress 558 in do_registers_info 
+/* Constant in conditional */
+suppress 558 in value_from_register 
+/* Constant in conditional */
+suppress 558 in add_enum_psymbol 
+/* Constant in conditional */
+suppress 558 in add_partial_symbol 
+/* Constant in conditional */
+suppress 558 mfree.c
+/* Constant in conditional */
+suppress 558 mmalloc.c
+/* Constant in conditional */
+suppress 558 mrealloc.c
+/* Constant in conditional */
+suppress 560 in solib_address 
+/* Assignment within conditional */
+suppress 560 in solib_info 
+/* Assignment within conditional */
+suppress 560 in solib_add 
+/* Assignment within conditional */
+suppress 560 in read_type 
+/* Assignment within conditional */
+suppress 560 in type_print_base 
+/* Assignment within conditional */
+suppress 560 in type_print_derivation_info 
+/* Assignment within conditional */
+suppress 560 in block_depth 
+/* Assignment within conditional */
+suppress 560 in select_source_symtab 
+/* Assignment within conditional */
+suppress 560 in clear_value_history 
+/* Assignment within conditional */
+suppress 560 in clear_displays 
+/* Assignment within conditional */
+suppress 560 in initialize_main 
+/* Assignment within conditional */
+suppress 560 in echo_command 
+/* Assignment within conditional */
+suppress 560 in unset_in_environ 
+/* Assignment within conditional */
+suppress 560 in set_in_environ 
+/* Assignment within conditional */
+suppress 560 in get_in_environ 
+/* Assignment within conditional */
+suppress 560 in do_setshow_command 
+/* Assignment within conditional */
+suppress 560 in breakpoint_1 
+/* Assignment within conditional */
+suppress 590 on sig 
+/* Unused formal parameter */
+suppress 590 in nindy_create_inferior 
+/* Unused formal parameter */
+suppress 590 in add_to_section_table 
+/* Unused formal parameter */
+suppress 590 in vx_create_inferior 
+/* Unused formal parameter */
+suppress 590 in host_convert_from_virtual 
+/* Unused formal parameter */
+suppress 590 in host_convert_to_virtual 
+/* Unused formal parameter */
+suppress 590 on siggnal 
+/* Unused formal parameter */
+suppress 590 in init_sig 
+/* Unused formal parameter */
+suppress 590 in nindy_resume 
+/* Unused formal parameter */
+suppress 590 in set_history_size_command 
+/* Unused formal parameter */
+suppress 590 in not_just_help_class_command 
+/* Unused formal parameter */
+suppress 590 on regno 
+/* Unused formal parameter */
+suppress 590 on from_tty 
+/* Unused formal parameter */
+suppress 590 on args 
+/* Unused formal parameter */
+suppress 590 in process_symbol_pair 
+/* Unused formal parameter */
+suppress 591 in print_scalar_formatted 
+/* Unused automatic variable */
+suppress 592 on rcsid 
+/* Unused static */
+suppress 594 in call_function_by_hand 
+/* Set but not used */
+suppress 594 in record_latest_value 
+/* Set but not used */
+suppress 594 in bpstat_stop_status 
+/* Set but not used */
+suppress 595 in coffstrip 
+/* Used before set */
+suppress 652 ../include/bfd.h 
+/* Declaration has no effect */
+suppress 652 /usr/include/machine/reg.h 
+/* Declaration has no effect */
+suppress 652 /usr/include/sun4/reg.h 
+/* Declaration has no effect */
+suppress 68 on complain
+/* Benign type mismatch */
+suppress 3 in read_range_type
+/* Over/underflow unary minus */
+suppress 442 ../bfd/archive.c
+/* \0 in string */
+suppress 558 ../bfd/b.out.c
+/* Conditional if always true */
+suppress 558 ../bfd/coffswap.c
+/* Conditional if always true -- bfd_h_put_x */
+suppress 529 ../bfd/coffswap.c
+/* Stmt unreach -- bfd_h_put_x */
+suppress 590 ../bfd/ecoff.c
+/* Formal parameter not used */
+suppress 590 on ignore
+/* Formal param not used */
+suppress 590 on ignore_exec_bfd
+/* Formal param not used */
+suppress 590 on ignore_core_bfd
+/* Formal param not used */
+suppress 590 on ignore_input_section
+/* Formal param not used */
+suppress 590 on ignore_newsect
+/* Formal param not used */
+suppress 590 on ignore_abfd
+/* Formal param not used */
+suppress 590 on ignore_symbol
+/* Formal param not used */
+suppress 590 on ignore_symbols
+/* Formal param not used */
+suppress 590 on signo
+/* Formal param not used */
+suppress 652
+/* The declaration has no effect */
+suppress 442 in ../bfd/archive.c
+/* Escape sequence in string literal has null value */
+
+/* Signals caught and ignored */
+catch HUP
+catch QUIT
+catch ILL
+catch TRAP
+catch IOT
+catch EMT
+catch FPE
+catch KILL
+catch BUS
+catch SEGV
+catch SYS
+catch PIPE
+catch TERM
+catch URG
+catch STOP
+catch TSTP
+catch TTIN
+catch TTOU
+catch IO
+catch XCPU
+catch XFSZ
+catch VTALRM
+catch PROF
+catch LOST
+catch USR1
+catch USR2
+ignore INT
+ignore ALRM
+ignore CONT
+ignore CHLD
+ignore WINCH
+
+/* Status of project */
diff --git a/gdb/scm-exp.c b/gdb/scm-exp.c
new file mode 100644
index 0000000..6399563
--- /dev/null
+++ b/gdb/scm-exp.c
@@ -0,0 +1,423 @@
+/* Scheme/Guile language support routines for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "value.h"
+#include "c-lang.h"
+#include "scm-lang.h"
+#include "scm-tags.h"
+
+#define USE_EXPRSTRING 0
+
+static void scm_lreadparen PARAMS ((int));
+static int scm_skip_ws PARAMS ((void));
+static void scm_read_token PARAMS ((int, int));
+static LONGEST scm_istring2number PARAMS ((char *, int, int));
+static LONGEST scm_istr2int PARAMS ((char *, int, int));
+static void scm_lreadr PARAMS ((int));
+
+static LONGEST
+scm_istr2int(str, len, radix)
+     char *str;
+     int len;
+     int radix;
+{
+  int i = 0;
+  LONGEST inum = 0;
+  int c;
+  int sign = 0;
+
+  if (0 >= len) return SCM_BOOL_F;	/* zero scm_length */
+  switch (str[0])
+    {		/* leading sign */
+    case '-':
+    case '+':
+      sign = str[0];
+      if (++i==len)
+	return SCM_BOOL_F; /* bad if lone `+' or `-' */
+    }
+  do {
+    switch (c = str[i++]) {
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+      c = c - '0';
+      goto accumulate;
+    case 'A': case 'B': case 'C': case 'D': case 'E': case 'F':
+      c = c-'A'+10;
+      goto accumulate;
+    case 'a': case 'b': case 'c': case 'd': case 'e': case 'f':
+      c = c-'a'+10;
+    accumulate:
+      if (c >= radix) return SCM_BOOL_F; /* bad digit for radix */
+      inum *= radix;
+      inum += c;
+      break;
+    default:
+      return SCM_BOOL_F;		/* not a digit */
+    }
+  } while (i < len);
+  if (sign == '-')
+    inum = -inum;
+  return SCM_MAKINUM (inum);
+}
+
+static LONGEST
+scm_istring2number(str, len, radix)
+     char *str;
+     int len;
+     int radix;
+{
+  int i = 0;
+  char ex = 0;
+  char ex_p = 0, rx_p = 0;	/* Only allow 1 exactness and 1 radix prefix */
+#if 0
+  SCM res;
+#endif
+  if (len==1)
+    if (*str=='+' || *str=='-') /* Catches lone `+' and `-' for speed */
+      return SCM_BOOL_F;
+
+  while ((len-i) >= 2  &&  str[i]=='#' && ++i)
+    switch (str[i++]) {
+    case 'b': case 'B':  if (rx_p++) return SCM_BOOL_F; radix = 2;  break;
+    case 'o': case 'O':  if (rx_p++) return SCM_BOOL_F; radix = 8;  break;
+    case 'd': case 'D':  if (rx_p++) return SCM_BOOL_F; radix = 10; break;
+    case 'x': case 'X':  if (rx_p++) return SCM_BOOL_F; radix = 16; break;
+    case 'i': case 'I':  if (ex_p++) return SCM_BOOL_F; ex = 2;     break;
+    case 'e': case 'E':  if (ex_p++) return SCM_BOOL_F; ex = 1;     break;
+    default:  return SCM_BOOL_F;
+    }
+
+  switch (ex) {
+  case 1:
+    return scm_istr2int(&str[i], len-i, radix);
+  case 0:
+    return scm_istr2int(&str[i], len-i, radix);
+#if 0
+    if NFALSEP(res) return res;
+#ifdef FLOATS
+  case 2: return scm_istr2flo(&str[i], len-i, radix);
+#endif
+#endif
+  }
+  return SCM_BOOL_F;
+}
+
+static void
+scm_read_token (c, weird)
+     int c;
+     int weird;
+{
+  while (1)
+    {
+      c = *lexptr++;
+      switch (c)
+	{
+	case '[':
+	case ']':
+	case '(':
+	case ')':
+	case '\"':
+	case ';':
+	case ' ':  case '\t':  case '\r':  case '\f':
+	case '\n':
+	  if (weird)
+	    goto default_case;
+	case '\0':  /* End of line */
+	eof_case:
+	  --lexptr;
+	  return;
+	case '\\':
+	  if (!weird)
+	    goto default_case;
+	  else
+	    {
+	      c = *lexptr++;
+	      if (c == '\0')
+		goto eof_case;
+	      else
+		goto default_case;
+	    }
+	case '}':
+	  if (!weird)
+	    goto default_case;
+
+	  c = *lexptr++;
+	  if (c == '#')
+	    return;
+	  else
+	    {
+	      --lexptr;
+	      c = '}';
+	      goto default_case;
+	    }
+
+	default:
+	default_case:
+	  ;
+	}
+    }
+}
+
+static int 
+scm_skip_ws ()
+{
+  register int c;
+  while (1)
+    switch ((c = *lexptr++))
+      {
+      case '\0':
+      goteof:
+	return c;
+      case ';':
+      lp:
+	switch ((c = *lexptr++))
+	  {
+	  case '\0':
+	    goto goteof;
+	  default:
+	    goto lp;
+	  case '\n':
+	    break;
+	  }
+      case ' ':  case '\t':  case '\r':  case '\f':  case '\n':
+	break;
+      default:
+	return c;
+      }
+}
+
+static void
+scm_lreadparen (skipping)
+     int skipping;
+{
+  for (;;)
+    {
+      int c = scm_skip_ws ();
+      if (')' == c || ']' == c)
+	return;
+      --lexptr;
+      if (c == '\0')
+	error ("missing close paren");
+      scm_lreadr (skipping);
+    }
+}
+
+static void
+scm_lreadr (skipping)
+     int skipping;
+{
+  int c, j;
+  struct stoken str;
+  LONGEST svalue = 0;
+ tryagain:
+  c = *lexptr++;
+  switch (c)
+    {
+    case '\0':
+      lexptr--;
+      return;
+    case '[':
+    case '(':
+      scm_lreadparen (skipping);
+      return;
+    case ']':
+    case ')':
+      error ("unexpected #\\%c", c);
+      goto tryagain;
+    case '\'':
+    case '`':
+      str.ptr = lexptr - 1;
+      scm_lreadr (skipping);
+      if (!skipping)
+	{
+	  value_ptr val = scm_evaluate_string (str.ptr, lexptr - str.ptr);
+	  if (!is_scmvalue_type (VALUE_TYPE (val)))
+	    error ("quoted scm form yields non-SCM value");
+	  svalue = extract_signed_integer (VALUE_CONTENTS (val),
+					   TYPE_LENGTH (VALUE_TYPE (val)));
+	  goto handle_immediate;
+	}
+      return;
+    case ',':
+      c = *lexptr++;
+      if ('@' != c)
+	lexptr--;
+      scm_lreadr (skipping);
+      return;
+    case '#':
+      c = *lexptr++;
+      switch (c)
+	{
+	case '[':
+	case '(':
+	  scm_lreadparen (skipping);
+	  return;
+	case 't':  case 'T':
+	  svalue = SCM_BOOL_T;
+	  goto handle_immediate;
+	case 'f':  case 'F':
+	  svalue = SCM_BOOL_F;
+	  goto handle_immediate;
+	case 'b':  case 'B':
+	case 'o':  case 'O':
+	case 'd':  case 'D':
+	case 'x':  case 'X':
+	case 'i':  case 'I':
+	case 'e':  case 'E':
+	  lexptr--;
+	  c = '#';
+	  goto num;
+	case '*': /* bitvector */
+	  scm_read_token (c, 0);
+	  return;
+	case '{':
+	  scm_read_token (c, 1);
+	  return;
+	case '\\': /* character */
+	  c = *lexptr++;
+	  scm_read_token (c, 0);
+	  return;
+	case '|':
+	  j = 1;		/* here j is the comment nesting depth */
+	lp:
+	  c = *lexptr++;
+	lpc:
+	  switch (c)
+	    {
+	    case '\0':
+	      error ("unbalanced comment");
+	    default:
+	      goto lp;
+	    case '|':
+	      if ('#' != (c = *lexptr++))
+		goto lpc;
+	      if (--j)
+		goto lp;
+	      break;
+	    case '#':
+	      if ('|' != (c = *lexptr++))
+		goto lpc;
+	      ++j;
+	      goto lp;
+	    }
+	  goto tryagain;
+	case '.':
+	default:
+#if 0
+	callshrp:
+#endif
+	  scm_lreadr (skipping);
+	  return;
+	}
+    case '\"':
+      while ('\"' != (c = *lexptr++))
+	{
+	  if (c == '\\')
+	    switch (c = *lexptr++)
+	      {
+	      case '\0':
+		error ("non-terminated string literal");
+	      case '\n':
+		continue;
+	      case '0':
+	      case 'f':
+	      case 'n':
+	      case 'r':
+	      case 't':
+	      case 'a':
+	      case 'v':
+		break;
+	      }
+	}
+      return;
+    case '0': case '1': case '2': case '3': case '4':
+    case '5': case '6': case '7': case '8': case '9':
+    case '.':
+    case '-':
+    case '+':
+    num:
+      {
+	str.ptr = lexptr-1;
+	scm_read_token (c, 0);
+	if (!skipping)
+	  {
+	    svalue = scm_istring2number (str.ptr, lexptr - str.ptr, 10);
+	    if (svalue != SCM_BOOL_F)
+	      goto handle_immediate;
+	    goto tok;
+	  }
+      }
+      return;
+    case ':':
+      scm_read_token ('-', 0);
+      return;
+#if 0
+    do_symbol:
+#endif
+    default:
+      str.ptr = lexptr-1;
+      scm_read_token (c, 0);
+    tok:
+      if (!skipping)
+	{
+	  str.length = lexptr - str.ptr;
+	  if (str.ptr[0] == '$')
+	    {
+	      write_dollar_variable (str);
+	      return;
+	    }
+	  write_exp_elt_opcode (OP_NAME);
+	  write_exp_string (str);
+	  write_exp_elt_opcode (OP_NAME);
+	}
+      return;
+    }
+ handle_immediate:
+  if (!skipping)
+    {
+      write_exp_elt_opcode (OP_LONG);
+      write_exp_elt_type (builtin_type_scm);
+      write_exp_elt_longcst (svalue);
+      write_exp_elt_opcode (OP_LONG);
+    }
+}
+
+int
+scm_parse ()
+{
+  char* start;
+  while (*lexptr == ' ')
+    lexptr++;
+  start = lexptr;
+  scm_lreadr (USE_EXPRSTRING);
+#if USE_EXPRSTRING
+  str.length = lexptr - start;
+  str.ptr = start;
+  write_exp_elt_opcode (OP_EXPRSTRING);
+  write_exp_string (str);
+  write_exp_elt_opcode (OP_EXPRSTRING);
+#endif
+  return 0;
+}
diff --git a/gdb/scm-lang.c b/gdb/scm-lang.c
new file mode 100644
index 0000000..7f31ba4
--- /dev/null
+++ b/gdb/scm-lang.c
@@ -0,0 +1,274 @@
+/* Scheme/Guile language support routines for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "value.h"
+#include "c-lang.h"
+#include "scm-lang.h"
+#include "scm-tags.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+
+static value_ptr evaluate_subexp_scm PARAMS ((struct type *, struct expression *,
+					      int *, enum noside));
+static value_ptr scm_lookup_name PARAMS ((char *));
+static int in_eval_c PARAMS ((void));
+static void scm_printstr PARAMS ((GDB_FILE *stream, char *string, unsigned int length, int width, int force_ellipses));
+
+extern struct type ** CONST_PTR (c_builtin_types[]);
+
+struct type *builtin_type_scm;
+
+void
+scm_printchar (c, stream)
+     int c;
+     GDB_FILE *stream;
+{
+  fprintf_filtered (stream, "#\\%c", c);
+}
+
+static void
+scm_printstr (stream, string, length, width, force_ellipses)
+     GDB_FILE *stream;
+     char *string;
+     unsigned int length;
+     int width;
+     int force_ellipses;
+{
+  fprintf_filtered (stream, "\"%s\"", string);
+}
+
+int
+is_scmvalue_type (type)
+     struct type *type;
+{
+  if (TYPE_CODE (type) == TYPE_CODE_INT
+      && TYPE_NAME (type) && strcmp (TYPE_NAME (type), "SCM") == 0)
+    {
+      return 1;
+    }
+  return 0;
+}
+
+/* Get the INDEX'th SCM value, assuming SVALUE is the address
+   of the 0'th one.  */
+
+LONGEST
+scm_get_field (svalue, index)
+     LONGEST svalue;
+     int index;
+{
+  char buffer[20];
+  read_memory (SCM2PTR (svalue) + index * TYPE_LENGTH (builtin_type_scm),
+	       buffer, TYPE_LENGTH (builtin_type_scm));
+  return extract_signed_integer (buffer, TYPE_LENGTH (builtin_type_scm));
+}
+
+/* Unpack a value of type TYPE in buffer VALADDR as an integer
+   (if CONTEXT == TYPE_CODE_IN), a pointer (CONTEXT == TYPE_CODE_PTR),
+   or Boolean (CONTEXT == TYPE_CODE_BOOL).  */
+
+LONGEST
+scm_unpack (type, valaddr, context)
+     struct type *type;
+     char *valaddr;
+     enum type_code context;
+{
+  if (is_scmvalue_type (type))
+    {
+      LONGEST svalue = extract_signed_integer (valaddr, TYPE_LENGTH (type));
+      if (context == TYPE_CODE_BOOL)
+	{
+	  if (svalue == SCM_BOOL_F)
+	    return 0;
+	  else
+	    return 1;
+	}
+      switch (7 & (int) svalue)
+	{
+	case 2:  case 6: /* fixnum */
+	  return svalue >> 2;
+	case 4: /* other immediate value */
+	  if (SCM_ICHRP (svalue)) /* character */
+	    return SCM_ICHR (svalue);
+	  else if (SCM_IFLAGP (svalue))
+	    {
+	      switch ((int) svalue)
+		{
+#ifndef SICP
+		case SCM_EOL:
+#endif
+		case SCM_BOOL_F:
+		  return 0;
+		case SCM_BOOL_T:
+		  return 1;
+		}
+	    }
+	  error ("Value can't be converted to integer.");
+	default:
+	  return svalue;
+	}
+    }
+  else
+    return unpack_long (type, valaddr);
+}
+
+/* True if we're correctly in Guile's eval.c (the evaluator and apply). */
+
+static int
+in_eval_c ()
+{
+  if (current_source_symtab && current_source_symtab->filename)
+    {
+      char *filename = current_source_symtab->filename;
+      int len = strlen (filename);
+      if (len >= 6 && strcmp (filename + len - 6, "eval.c") == 0)
+	return 1;
+    }
+  return 0;
+}
+
+/* Lookup a value for the variable named STR.
+   First lookup in Scheme context (using the scm_lookup_cstr inferior
+   function), then try lookup_symbol for compiled variables. */
+
+static value_ptr
+scm_lookup_name (str)
+     char *str;
+{
+  value_ptr args[3];
+  int len = strlen (str);
+  value_ptr func, val;
+  struct symbol *sym;
+  args[0] = value_allocate_space_in_inferior (len);
+  args[1] = value_from_longest (builtin_type_int, len);
+  write_memory (value_as_long (args[0]), str, len);
+
+  if (in_eval_c ()
+      && (sym = lookup_symbol ("env",
+			       expression_context_block,
+			       VAR_NAMESPACE, (int *) NULL,
+			       (struct symtab **) NULL)) != NULL)
+    args[2] = value_of_variable (sym, expression_context_block);
+  else
+    /* FIXME in this case, we should try lookup_symbol first */
+    args[2] = value_from_longest (builtin_type_scm, SCM_EOL);
+
+  func = find_function_in_inferior ("scm_lookup_cstr");
+  val = call_function_by_hand (func, 3, args);
+  if (!value_logical_not (val))
+    return value_ind (val);
+
+  sym = lookup_symbol (str,
+		       expression_context_block,
+		       VAR_NAMESPACE, (int *) NULL,
+		       (struct symtab **) NULL);
+  if (sym)
+    return value_of_variable (sym, NULL);
+  error ("No symbol \"%s\" in current context.");
+}
+
+value_ptr
+scm_evaluate_string (str, len)
+     char *str; int len;
+{
+  value_ptr func;
+  value_ptr addr = value_allocate_space_in_inferior (len + 1);
+  LONGEST iaddr = value_as_long (addr);
+  write_memory (iaddr, str, len);
+  /* FIXME - should find and pass env */
+  write_memory (iaddr + len, "", 1);
+  func = find_function_in_inferior ("scm_evstr");
+  return call_function_by_hand (func, 1, &addr);
+}
+
+static value_ptr
+evaluate_subexp_scm (expect_type, exp, pos, noside)
+     struct type *expect_type;
+     register struct expression *exp;
+     register int *pos;
+     enum noside noside;
+{
+  enum exp_opcode op = exp->elts[*pos].opcode;
+  int len, pc;  char *str;
+  switch (op)
+    {
+    case OP_NAME:
+      pc = (*pos)++;
+      len = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (len + 1);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      str = &exp->elts[pc + 2].string;
+      return scm_lookup_name (str);
+    case OP_EXPRSTRING:
+      pc = (*pos)++;
+      len = longest_to_int (exp->elts[pc + 1].longconst);
+      (*pos) += 3 + BYTES_TO_EXP_ELEM (len + 1);
+      if (noside == EVAL_SKIP)
+	goto nosideret;
+      str = &exp->elts[pc + 2].string;
+      return scm_evaluate_string (str, len);
+    default: ;
+    }
+  return evaluate_subexp_standard (expect_type, exp, pos, noside);
+ nosideret:
+  return value_from_longest (builtin_type_long, (LONGEST) 1);
+}
+
+const struct language_defn scm_language_defn = {
+  "scheme",			/* Language name */
+  language_scm,
+  c_builtin_types,
+  range_check_off,
+  type_check_off,
+  scm_parse,
+  c_error,
+  evaluate_subexp_scm,
+  scm_printchar,		/* Print a character constant */
+  scm_printstr,			/* Function to print string constant */
+  NULL,				/* Function to print a single character */
+  NULL,				/* Create fundamental type in this language */
+  c_print_type,			/* Print a type using appropriate syntax */
+  scm_val_print,		/* Print a value using appropriate syntax */
+  scm_value_print,		/* Print a top-level value */
+  {"",     "",    "",  ""},	/* Binary format info */
+  {"#o%lo",  "#o",   "o", ""},	/* Octal format info */
+  {"%ld",   "",    "d", ""},	/* Decimal format info */
+  {"#x%lX", "#X",  "X", ""},	/* Hex format info */
+  NULL,				/* expression operators for printing */
+  1,				/* c-style arrays */
+  0,				/* String lower bound */
+  &builtin_type_char,		/* Type of string elements */ 
+  LANG_MAGIC
+};
+
+void
+_initialize_scheme_language ()
+{
+  add_language (&scm_language_defn);
+  builtin_type_scm = init_type (TYPE_CODE_INT,
+				TARGET_LONG_BIT / TARGET_CHAR_BIT,
+				0, "SCM", (struct objfile *) NULL);
+}
diff --git a/gdb/scm-lang.h b/gdb/scm-lang.h
new file mode 100644
index 0000000..878a2ab
--- /dev/null
+++ b/gdb/scm-lang.h
@@ -0,0 +1,50 @@
+#define SICP
+#include "scm-tags.h"
+#undef SCM_NCELLP
+#define SCM_NCELLP(x) 	((SCM_SIZE-1) & (int)(x))
+#define SCM_ITAG8_DATA(X)	((X)>>8)
+#define SCM_ICHR(x)	((unsigned char)SCM_ITAG8_DATA(x))
+#define SCM_ICHRP(x)    (SCM_ITAG8(x) == scm_tc8_char)
+#define scm_tc8_char 0xf4
+#define SCM_IFLAGP(n)            ((0x87 & (int)(n))==4)
+#define SCM_ISYMNUM(n)           ((int)((n)>>9))
+#define SCM_ISYMCHARS(n)         (scm_isymnames[SCM_ISYMNUM(n)])
+#define SCM_ILOCP(n)             ((0xff & (int)(n))==0xfc)
+#define SCM_ITAG8(X)             ((int)(X) & 0xff)
+#define SCM_TYP7(x)              (0x7f & (int)SCM_CAR(x))
+#define SCM_LENGTH(x) (((unsigned long)SCM_CAR(x))>>8)
+#define SCM_NCONSP(x) (1 & (int)SCM_CAR(x))
+#define SCM_NECONSP(x) (SCM_NCONSP(x) && (1 != SCM_TYP3(x)))
+#define SCM_CAR(x) scm_get_field (x, 0)
+#define SCM_CDR(x) scm_get_field (x, 1)
+#define SCM_VELTS(x) ((SCM *)SCM_CDR(x))
+#define SCM_CLOSCAR(x) (SCM_CAR(x)-scm_tc3_closure)
+#define SCM_CODE(x) SCM_CAR(SCM_CLOSCAR (x))
+#define SCM_MAKINUM(x) (((x)<<2)+2L)
+
+#ifdef __STDC__		/* Forward decls for prototypes */
+struct value;
+#endif
+
+extern int scm_value_print PARAMS ((struct value *, GDB_FILE*,
+				    int, enum val_prettyprint));
+
+extern int scm_val_print PARAMS ((struct type*, char*, int, CORE_ADDR, GDB_FILE*,
+				 int, int, int, enum val_prettyprint));
+
+extern LONGEST scm_get_field PARAMS ((LONGEST, int));
+
+extern void scm_scmval_print PARAMS ((LONGEST, GDB_FILE *,
+				     int, int, int, enum val_prettyprint));
+
+extern int is_scmvalue_type PARAMS ((struct type*));
+
+extern void scm_printchar PARAMS ((int, GDB_FILE*));
+
+extern struct value * scm_evaluate_string PARAMS ((char*, int));
+
+extern struct type *builtin_type_scm;
+
+extern int scm_parse PARAMS ((void));
+
+extern LONGEST scm_unpack PARAMS ((struct type *, char *, enum type_code));
diff --git a/gdb/scm-tags.h b/gdb/scm-tags.h
new file mode 100644
index 0000000..fbe45cc
--- /dev/null
+++ b/gdb/scm-tags.h
@@ -0,0 +1,385 @@
+/* This is a minimally edited version of Guile's tags.h. */
+/* classes: h_files */
+
+#ifndef TAGSH
+#define TAGSH
+/*	Copyright (C) 1995 Free Software Foundation, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * As a special exception, the Free Software Foundation gives permission
+ * for additional uses of the text contained in its release of GUILE.
+ *
+ * The exception is that, if you link the GUILE library with other files
+ * to produce an executable, this does not by itself cause the
+ * resulting executable to be covered by the GNU General Public License.
+ * Your use of that executable is in no way restricted on account of
+ * linking the GUILE library code into it.
+ *
+ * This exception does not however invalidate any other reasons why
+ * the executable file might be covered by the GNU General Public License.
+ *
+ * This exception applies only to the code released by the
+ * Free Software Foundation under the name GUILE.  If you copy
+ * code from other Free Software Foundation releases into a copy of
+ * GUILE, as the General Public License permits, the exception does
+ * not apply to the code that you add in this way.  To avoid misleading
+ * anyone as to the status of such modified files, you must delete
+ * this exception notice from them.
+ *
+ * If you write modifications of your own for GUILE, it is your choice
+ * whether to permit this exception to apply to your modifications.
+ * If you do not wish that, delete this exception notice.  
+ */
+
+
+/** This file defines the format of SCM values and cons pairs.  
+ ** It is here that tag bits are assigned for various purposes.
+ **/
+
+
+/* Three Bit Tags
+ *
+ * 000 -- a non-immediate value.  Points into the pair heap.  
+ *
+ * 001 -- a gloc (i.e., a resolved global variable in a CAR in a code graph)
+ *	  or the CAR of an object handle (i.e., the tagged pointer to the
+ *	  vtable part of a user-defined object).
+ *
+ *        If X has this tag, the value at CDAR(X - 1) distinguishes
+ *	  glocs from object handles.  The distinction only needs
+ *	  to be made in a few places.  Only a few parts of the code know
+ *	  about glocs.  In most cases, when a value in the CAR of a pair
+ *	  has the tag 001, it means that the pair is an object handle.
+ *
+ * 010 -- the tag for immediate, exact integers. 
+ *
+ * 011 -- in the CAR of a pair, this tag indicates that the pair is a closure.
+ *	  The remaining bits of the CAR are a pointer into the pair heap
+ * 	  to the code graph for the closure.
+ *
+ * 1xy -- an extension tag which means that there is a five or six bit
+ *	  tag to the left of the low three bits.  See the nice diagrams
+ *	  in ../doc/code.doc if you want to know what the bits mean.
+ */
+
+
+
+
+
+#define scm_tc3_cons		0
+#define scm_tc3_cons_gloc	1
+#define scm_tc3_closure		3
+
+#define scm_tc7_ssymbol		5
+#define scm_tc7_msymbol		7
+#define scm_tc7_string		13
+#define scm_tc7_bvect		15
+#define scm_tc7_vector		21
+#define scm_tc7_lvector		23
+#define scm_tc7_ivect		29
+#define scm_tc7_uvect		31
+/* spare 37 39 */
+#define scm_tc7_fvect		45
+#define scm_tc7_dvect		47
+#define scm_tc7_cvect		53
+#define scm_tc7_port		55
+#define scm_tc7_contin		61
+#define scm_tc7_cclo		63
+/* spare 69 71 77 79 */
+#define scm_tc7_subr_0		85
+#define scm_tc7_subr_1		87
+#define scm_tc7_cxr		93
+#define scm_tc7_subr_3		95
+#define scm_tc7_subr_2		101
+#define scm_tc7_asubr		103
+#define scm_tc7_subr_1o		109
+#define scm_tc7_subr_2o		111
+#define scm_tc7_lsubr_2		117
+#define scm_tc7_lsubr		119
+#define scm_tc7_rpsubr		125
+
+#define scm_tc7_smob		127
+#define scm_tc_free_cell	127
+
+#define scm_tc16_flo		0x017f
+#define scm_tc_flo		0x017fL
+
+#define SCM_REAL_PART		(1L<<16)
+#define SCM_IMAG_PART		(2L<<16)
+#define scm_tc_dblr		(scm_tc16_flo|REAL_PART)
+#define scm_tc_dblc		(scm_tc16_flo|REAL_PART|IMAG_PART)
+
+#define scm_tc16_bigpos		0x027f
+#define scm_tc16_bigneg		0x037f
+
+#define scm_tc16_fport 		(scm_tc7_port + 0*256L)
+#define scm_tc16_pipe 		(scm_tc7_port + 1*256L)
+#define scm_tc16_strport	(scm_tc7_port + 2*256L)
+#define scm_tc16_sfport 	(scm_tc7_port + 3*256L)
+
+
+
+/* For cons pairs with immediate values in the CAR */
+#define scm_tcs_cons_imcar 2:case 4:case 6:case 10:\
+ case 12:case 14:case 18:case 20:\
+ case 22:case 26:case 28:case 30:\
+ case 34:case 36:case 38:case 42:\
+ case 44:case 46:case 50:case 52:\
+ case 54:case 58:case 60:case 62:\
+ case 66:case 68:case 70:case 74:\
+ case 76:case 78:case 82:case 84:\
+ case 86:case 90:case 92:case 94:\
+ case 98:case 100:case 102:case 106:\
+ case 108:case 110:case 114:case 116:\
+ case 118:case 122:case 124:case 126
+
+/* For cons pairs with non-immediate values in the CAR */
+#define scm_tcs_cons_nimcar 0:case 8:case 16:case 24:\
+ case 32:case 40:case 48:case 56:\
+ case 64:case 72:case 80:case 88:\
+ case 96:case 104:case 112:case 120
+
+/* A CONS_GLOC occurs in code.  It's CAR is a pointer to the
+ * CDR of a variable.  The low order bits of the CAR are 001.
+ * The CDR of the gloc is the code continuation.
+ */
+#define scm_tcs_cons_gloc 1:case 9:case 17:case 25:\
+ case 33:case 41:case 49:case 57:\
+ case 65:case 73:case 81:case 89:\
+ case 97:case 105:case 113:case 121
+
+#define scm_tcs_closures   3:case 11:case 19:case 27:\
+ case 35:case 43:case 51:case 59:\
+ case 67:case 75:case 83:case 91:\
+ case 99:case 107:case 115:case 123
+
+#define scm_tcs_subrs scm_tc7_asubr:case scm_tc7_subr_0:case scm_tc7_subr_1:case scm_tc7_cxr:\
+ case scm_tc7_subr_3:case scm_tc7_subr_2:case scm_tc7_rpsubr:case scm_tc7_subr_1o:\
+ case scm_tc7_subr_2o:case scm_tc7_lsubr_2:case scm_tc7_lsubr
+
+#define scm_tcs_symbols scm_tc7_ssymbol:case scm_tc7_msymbol
+
+#define scm_tcs_bignums tc16_bigpos:case tc16_bigneg
+
+
+
+/* References to objects are of type SCM.  Values may be non-immediate
+ * (pointers) or immediate (encoded, immutable, scalar values that fit
+ * in an SCM variable).
+ */
+
+typedef long SCM;
+
+/* Cray machines have pointers that are incremented once for each word,
+ * rather than each byte, the 3 most significant bits encode the byte
+ * within the word.  The following macros deal with this by storing the
+ * native Cray pointers like the ones that looks like scm expects.  This
+ * is done for any pointers that might appear in the car of a scm_cell, pointers
+ * to scm_vector elts, functions, &c are not munged.
+ */
+#ifdef _UNICOS
+# define SCM2PTR(x) ((int)(x) >> 3)
+# define PTR2SCM(x) (((SCM)(x)) << 3)
+# define SCM_POINTERS_MUNGED
+#else
+# define SCM2PTR(x) (x)
+# define PTR2SCM(x) ((SCM)(x))
+#endif /* def _UNICOS */
+
+
+
+/* Immediate? Predicates 
+ */
+#define SCM_IMP(x) 	(6 & (int)(x))
+#define SCM_NIMP(x) 	(!SCM_IMP(x))
+
+
+
+enum scm_tags
+{
+  scm_tc8_char = 0xf4
+};
+
+#define SCM_ITAG8(X)		((int)(X) & 0xff)
+#define SCM_MAKE_ITAG8(X, TAG)	(((X)<<8) + TAG)
+#define SCM_ITAG8_DATA(X)	((X)>>8)
+
+
+
+/* Local Environment Structure
+ */
+#define SCM_ILOCP(n)		((0xff & (int)(n))==0xfc)
+#define SCM_ILOC00		(0x000000fcL)
+#define SCM_IDINC		(0x00100000L)
+#define SCM_ICDR		(0x00080000L)
+#define SCM_IFRINC		(0x00000100L)
+#define SCM_IDSTMSK		(-SCM_IDINC)
+#define SCM_IFRAME(n) 		((int)((SCM_ICDR-SCM_IFRINC)>>8) & ((int)(n)>>8))
+#define SCM_IDIST(n) 		(((unsigned long)(n))>>20)
+#define SCM_ICDRP(n) 		(SCM_ICDR & (n))
+
+
+/* Immediate Symbols, Special Symbols, Flags (various constants).
+ */
+
+/* ISYMP tests for ISPCSYM and ISYM */
+#define SCM_ISYMP(n) 		((0x187 & (int)(n))==4)
+
+/* IFLAGP tests for ISPCSYM, ISYM and IFLAG */
+#define SCM_IFLAGP(n) 		((0x87 & (int)(n))==4)
+#define SCM_ISYMNUM(n) 		((int)((n)>>9))
+#define SCM_ISYMCHARS(n) 	(scm_isymnames[SCM_ISYMNUM(n)])
+#define SCM_MAKSPCSYM(n) 	(((n)<<9)+((n)<<3)+4L)
+#define SCM_MAKISYM(n) 		(((n)<<9)+0x74L)
+#define SCM_MAKIFLAG(n) 	(((n)<<9)+0x174L)
+
+/* This table must agree with the declarations 
+ * in repl.c: {Names of immediate symbols}.
+ *
+ * These are used only in eval but their values
+ * have to be allocated here.
+ *
+ */
+
+#define SCM_IM_AND		SCM_MAKSPCSYM(0)
+#define SCM_IM_BEGIN		SCM_MAKSPCSYM(1)
+#define SCM_IM_CASE		SCM_MAKSPCSYM(2)
+#define SCM_IM_COND		SCM_MAKSPCSYM(3)
+#define SCM_IM_DO		SCM_MAKSPCSYM(4)
+#define SCM_IM_IF		SCM_MAKSPCSYM(5)
+#define SCM_IM_LAMBDA		SCM_MAKSPCSYM(6)
+#define SCM_IM_LET		SCM_MAKSPCSYM(7)
+#define SCM_IM_LETSTAR		SCM_MAKSPCSYM(8)
+#define SCM_IM_LETREC		SCM_MAKSPCSYM(9)
+#define SCM_IM_OR		SCM_MAKSPCSYM(10)
+#define SCM_IM_QUOTE		SCM_MAKSPCSYM(11)
+#define SCM_IM_SET		SCM_MAKSPCSYM(12)
+#define SCM_IM_DEFINE		SCM_MAKSPCSYM(13)
+#define SCM_IM_APPLY		SCM_MAKISYM(14)
+#define SCM_IM_CONT		SCM_MAKISYM(15)
+#define SCM_NUM_ISYMS 16
+
+/* Important immediates
+ */
+
+#define SCM_BOOL_F		SCM_MAKIFLAG(SCM_NUM_ISYMS+0)
+#define SCM_BOOL_T 		SCM_MAKIFLAG(SCM_NUM_ISYMS+1)
+#define SCM_UNDEFINED	 	SCM_MAKIFLAG(SCM_NUM_ISYMS+2)
+#define SCM_EOF_VAL 		SCM_MAKIFLAG(SCM_NUM_ISYMS+3)
+
+#ifdef SICP
+#define SCM_EOL 		SCM_BOOL_F
+#else
+#define SCM_EOL			SCM_MAKIFLAG(SCM_NUM_ISYMS+4)
+#endif
+
+#define SCM_UNSPECIFIED		SCM_MAKIFLAG(SCM_NUM_ISYMS+5)
+
+
+
+/* Heap Pairs and the Empty List Predicates
+ */
+#define SCM_NULLP(x) 	(SCM_EOL == (x))
+#define SCM_NNULLP(x) 	(SCM_EOL != (x))
+#define SCM_CELLP(x) 	(!SCM_NCELLP(x))
+#define SCM_NCELLP(x) 	((sizeof(scm_cell)-1) & (int)(x))
+
+
+
+#define SCM_UNBNDP(x) 	(SCM_UNDEFINED==(x))
+
+
+
+/* Testing and Changing GC Marks in Various Standard Positions
+ */
+#define SCM_GCMARKP(x) 		(1 & (int)SCM_CDR(x))
+#define SCM_GC8MARKP(x) 	(0x80 & (int)SCM_CAR(x))
+#define SCM_SETGCMARK(x) 	(SCM_CDR(x) |= 1)
+#define SCM_CLRGCMARK(x) 	(SCM_CDR(x) &= ~1L)
+#define SCM_SETGC8MARK(x) 	(SCM_CAR(x) |= 0x80)
+#define SCM_CLRGC8MARK(x) 	(SCM_CAR(x) &= ~0x80L)
+
+
+/* Extracting Tag Bits, With or Without GC Safety and Optional Bits
+ */
+#define SCM_TYP3(x) 		(7 & (int)SCM_CAR(x))
+#define SCM_TYP7(x) 		(0x7f & (int)SCM_CAR(x))
+#define SCM_TYP7S(x) 		(0x7d & (int)SCM_CAR(x))
+#define SCM_TYP16(x) 		(0xffff & (int)SCM_CAR(x))
+#define SCM_TYP16S(x) 		(0xfeff & (int)SCM_CAR(x))
+#define SCM_GCTYP16(x) 		(0xff7f & (int)SCM_CAR(x))
+
+
+/* Two slightly extensible types: smobs and ptobs.
+ *
+ */
+#define SCM_SMOBNUM(x) (0x0ff & (CAR(x)>>8));
+#define SCM_PTOBNUM(x) (0x0ff & (CAR(x)>>8));
+
+
+
+
+#define SCM_DIRP(x) (SCM_NIMP(x) && (TYP16(x)==(scm_tc16_dir)))
+#define SCM_OPDIRP(x) (SCM_NIMP(x) && (CAR(x)==(scm_tc16_dir | OPN)))
+
+
+
+/* Lvectors 
+ */
+#define SCM_LVECTORP(x) (TYP7(x)==tc7_lvector)
+
+
+#if 0
+
+/* Sockets 
+ */
+#define tc_socket (tc7_port | OPN)
+#define SCM_SOCKP(x) (((0x7f | OPN | RDNG | WRTNG) & CAR(x))==(tc_socket))
+#define SCM_SOCKTYP(x) (CAR(x)>>24)
+
+
+
+extern int scm_tc16_key_vector;
+#define SCM_KEYVECP(X)   (scm_tc16_key_vector == TYP16 (X))
+#define SCM_KEYVECLEN(OBJ) (((unsigned long)CAR (obj)) >> 16)
+
+
+#define SCM_MALLOCDATA(obj) ((char *)CDR(obj))
+#define SCM_MALLOCLEN(obj) (((unsigned long)CAR (obj)) >> 16)
+#define SCM_WORDDATA(obj)  (CDR (obj))
+
+
+#define SCM_BYTECODEP(X) ((TYP7 (X) == tc7_cclo) && (CCLO_SUBR (X) == rb_proc))
+#define SCM_BYTECODE_CONSTANTS(X) (VELTS(X)[1])
+#define SCM_BYTECODE_CODE(X) (VELTS(X)[2])
+#define SCM_BYTECODE_NAME(X) (VELTS(X)[3])
+#define SCM_BYTECODE_BCODE(X) (VELTS(X)[4])
+#define SCM_BYTECODE_ELTS 5
+
+
+#define SCM_FREEP(x) (CAR(x)==tc_free_cell)
+#define SCM_NFREEP(x) (!FREEP(x))
+
+#endif /* 0*/
+
+#ifdef __STDC__
+
+#else /* STDC */
+
+#endif /* STDC */
+
+
+#endif  /* TAGSH */
diff --git a/gdb/scm-valprint.c b/gdb/scm-valprint.c
new file mode 100644
index 0000000..71acc69
--- /dev/null
+++ b/gdb/scm-valprint.c
@@ -0,0 +1,422 @@
+/* Scheme/Guile language support routines for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "parser-defs.h"
+#include "language.h"
+#include "value.h"
+#include "scm-lang.h"
+#include "valprint.h"
+#include "gdbcore.h"
+
+/* FIXME: Should be in a header file that we import. */
+extern int
+c_val_print PARAMS ((struct type *, char *, int, CORE_ADDR, GDB_FILE *, int, int,
+		     int, enum val_prettyprint));
+
+static void scm_ipruk PARAMS ((char *, LONGEST, GDB_FILE *));
+static void scm_scmlist_print PARAMS ((LONGEST, GDB_FILE *, int, int,
+				      int, enum val_prettyprint));
+static int scm_inferior_print PARAMS ((LONGEST, GDB_FILE *, int, int,
+				       int, enum val_prettyprint));
+
+/* Prints the SCM value VALUE by invoking the inferior, if appropraite.
+   Returns >= 0 on succes;  retunr -1 if the inferior cannot/should not
+   print VALUE. */
+
+static int
+scm_inferior_print (value, stream, format, deref_ref, recurse, pretty)
+     LONGEST value;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  return -1;
+}
+
+/* {Names of immediate symbols}
+ * This table must agree with the declarations in scm.h: {Immediate Symbols}.*/
+
+static char *scm_isymnames[] =
+{
+  /* This table must agree with the declarations */
+  "and",
+  "begin",
+  "case",
+  "cond",
+  "do",
+  "if",
+  "lambda",
+  "let",
+  "let*",
+  "letrec",
+  "or",
+  "quote",
+  "set!",
+  "define",
+#if 0
+  "literal-variable-ref",
+  "literal-variable-set!",
+#endif
+  "apply",
+  "call-with-current-continuation",
+
+ /* user visible ISYMS */
+ /* other keywords */
+ /* Flags */
+
+  "#f",
+  "#t",
+  "#<undefined>",
+  "#<eof>",
+  "()",
+  "#<unspecified>"
+};
+
+static void
+scm_scmlist_print (svalue, stream, format, deref_ref, recurse, pretty)
+     LONGEST svalue;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  unsigned int more = print_max;
+  if (recurse > 6)
+    {
+      fputs_filtered ("...", stream);
+      return;
+    }
+  scm_scmval_print (SCM_CAR (svalue), stream, format,
+		    deref_ref, recurse + 1, pretty);
+  svalue = SCM_CDR (svalue);
+  for (; SCM_NIMP (svalue); svalue = SCM_CDR (svalue))
+    {
+      if (SCM_NECONSP (svalue))
+	break;
+      fputs_filtered (" ", stream);
+      if (--more == 0)
+	{
+	  fputs_filtered ("...", stream);
+	  return;
+	}
+      scm_scmval_print (SCM_CAR (svalue), stream, format,
+			deref_ref, recurse + 1, pretty);
+    }
+  if (SCM_NNULLP (svalue))
+    {
+      fputs_filtered (" . ", stream);
+      scm_scmval_print (svalue, stream, format,
+			deref_ref, recurse + 1, pretty);
+    }
+}
+
+static void
+scm_ipruk (hdr, ptr, stream)
+     char *hdr;
+     LONGEST ptr;
+     GDB_FILE *stream;
+{
+  fprintf_filtered (stream, "#<unknown-%s", hdr);
+#define SCM_SIZE TYPE_LENGTH (builtin_type_scm)
+  if (SCM_CELLP (ptr))
+    fprintf_filtered (stream, " (0x%lx . 0x%lx) @",
+		      (long) SCM_CAR (ptr), (long) SCM_CDR (ptr));
+  fprintf_filtered (stream, " 0x%x>", ptr);
+}
+
+void
+scm_scmval_print (svalue, stream, format, deref_ref, recurse, pretty)
+     LONGEST svalue;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+ taloop:
+  switch (7 & (int) svalue)
+    {
+    case 2:
+    case 6:
+      print_longest (stream, format ? format : 'd', 1, svalue >> 2);
+      break;
+    case 4:
+      if (SCM_ICHRP (svalue))
+	{
+	  svalue = SCM_ICHR (svalue);
+	  scm_printchar (svalue, stream);
+	  break;
+	}
+      else if (SCM_IFLAGP (svalue)
+	       && (SCM_ISYMNUM (svalue)
+		   < (sizeof scm_isymnames / sizeof (char *))))
+	{
+	  fputs_filtered (SCM_ISYMCHARS (svalue), stream);
+	  break;
+	}
+      else if (SCM_ILOCP (svalue))
+	{
+	  fprintf_filtered (stream, "#@%ld%c%ld",
+			    (long) SCM_IFRAME (svalue),
+			    SCM_ICDRP (svalue) ? '-' : '+',
+			    (long) SCM_IDIST (svalue));
+	  break;
+	}
+      else
+	goto idef;
+      break;
+    case 1:
+      /* gloc */
+      svalue = SCM_CAR (svalue - 1);
+      goto taloop;
+    default:
+    idef:
+      scm_ipruk ("immediate", svalue, stream);
+      break;
+    case 0:
+
+      switch (SCM_TYP7 (svalue))
+	{
+	case scm_tcs_cons_gloc:
+	  if (SCM_CDR (SCM_CAR (svalue) - 1L) == 0)
+	    {
+#if 0
+	      SCM name;
+#endif
+	      fputs_filtered ("#<latte ", stream);
+#if 1
+	      fputs_filtered ("???", stream);
+#else
+	      name = ((SCM n*)(STRUCT_TYPE( exp)))[struct_i_name];
+	      scm_lfwrite (CHARS (name),
+			   (sizet) sizeof (char),
+			   (sizet) LENGTH (name),
+			   port);
+#endif
+	      fprintf_filtered (stream, " #X%lX>", svalue);
+	      break;
+	    }
+	case scm_tcs_cons_imcar:
+	case scm_tcs_cons_nimcar:
+	  fputs_filtered ("(", stream);
+	  scm_scmlist_print (svalue, stream, format,
+			     deref_ref, recurse + 1, pretty);
+	  fputs_filtered (")", stream);
+	  break;
+	case scm_tcs_closures:
+	  fputs_filtered ("#<CLOSURE ", stream);
+	  scm_scmlist_print (SCM_CODE (svalue), stream, format,
+			     deref_ref, recurse + 1, pretty);
+	  fputs_filtered (">", stream);
+	  break;
+	case scm_tc7_string:
+	  {
+	    int len = SCM_LENGTH (svalue);
+	    CORE_ADDR addr = (CORE_ADDR) SCM_CDR (svalue);
+	    int i;
+	    int done = 0;
+	    int buf_size;
+	    char buffer[64];
+	    int truncate = print_max && len > (int) print_max;
+	    if (truncate)
+	      len = print_max;
+	    fputs_filtered ("\"", stream);
+	    for (; done < len; done += buf_size)
+	      {
+		buf_size = min (len - done, 64);
+		read_memory (addr + done, buffer, buf_size);
+		
+		for (i = 0; i < buf_size; ++i)
+		  switch (buffer[i])
+		    {
+		    case '\"':
+		    case '\\':
+		      fputs_filtered ("\\", stream);
+		    default:
+		      fprintf_filtered (stream, "%c", buffer[i]);
+		    }
+	      }
+	    fputs_filtered (truncate ? "...\"" : "\"", stream);
+	    break;
+	  }
+	  break;
+	case scm_tcs_symbols:
+	  {
+	    int len = SCM_LENGTH (svalue);
+
+	    char * str = (char*) alloca (len);
+	    read_memory (SCM_CDR (svalue), str, len + 1);
+	    /* Should handle weird characters FIXME */
+	    str[len] = '\0';
+	    fputs_filtered (str, stream);
+	    break;
+	  }
+	case scm_tc7_vector:
+	  {
+	    int len = SCM_LENGTH (svalue);
+	    int i;
+	    LONGEST elements = SCM_CDR(svalue);
+	    fputs_filtered ("#(", stream);
+	    for (i = 0; i < len; ++i)
+	      {
+		if (i > 0)
+		  fputs_filtered (" ", stream);
+		scm_scmval_print (scm_get_field (elements, i), stream, format,
+				  deref_ref, recurse + 1, pretty);
+	      }
+	    fputs_filtered (")", stream);
+	  }
+	  break;
+#if 0
+	case tc7_lvector:
+	  {
+	    SCM result;
+	    SCM hook;
+	    hook = scm_get_lvector_hook (exp, LV_PRINT_FN);
+	    if (hook == BOOL_F)
+	      {
+		scm_puts ("#<locked-vector ", port);
+		scm_intprint(CDR(exp), 16, port);
+		scm_puts (">", port);
+	      }
+	    else
+	      {
+		result
+		  = scm_apply (hook,
+			       scm_listify (exp, port, (writing ? BOOL_T : BOOL_F),
+					    SCM_UNDEFINED),
+			       EOL);
+		if (result == BOOL_F)
+		  goto punk;
+	      }
+	    break;
+	  }
+	  break;
+	case tc7_bvect:
+	case tc7_ivect:
+	case tc7_uvect:
+	case tc7_fvect:
+	case tc7_dvect:
+	case tc7_cvect:
+	  scm_raprin1 (exp, port, writing);
+	  break;
+#endif
+	case scm_tcs_subrs:
+	  {
+	    int index = SCM_CAR (svalue) >> 8;
+#if 1
+	    char str[20];
+	    sprintf (str, "#%d", index);
+#else
+	    char *str = index ? SCM_CHARS (scm_heap_org+index) : "";
+#define SCM_CHARS(x) ((char *)(SCM_CDR(x)))
+	    char *str = CHARS (SNAME (exp));
+#endif
+	    fprintf_filtered (stream, "#<primitive-procedure %s>",
+			      str);
+	  }
+	  break;
+#if 0
+#ifdef CCLO
+	case tc7_cclo:
+	  scm_puts ("#<compiled-closure ", port);
+	  scm_iprin1 (CCLO_SUBR (exp), port, writing);
+	  scm_putc ('>', port);
+	  break;
+#endif
+	case tc7_contin:
+	  fprintf_filtered (stream, "#<continuation %d @ #X%lx >",
+			    LENGTH (svalue),
+			    (long) CHARS (svalue));
+	  break;
+	case tc7_port:
+	  i = PTOBNUM (exp);
+	  if (i < scm_numptob && scm_ptobs[i].print && (scm_ptobs[i].print) (exp, port, writing))
+	    break;
+	  goto punk;
+	case tc7_smob:
+	  i = SMOBNUM (exp);
+	  if (i < scm_numsmob && scm_smobs[i].print
+	      && (scm_smobs[i].print) (exp, port, writing))
+	    break;
+	  goto punk;
+#endif
+	default:
+#if 0
+	punk:
+#endif
+	  scm_ipruk ("type", svalue, stream);
+	}
+      break;
+    }
+}
+
+int
+scm_val_print (type, valaddr, embedded_offset, address,
+               stream, format, deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  if (is_scmvalue_type (type))
+    {
+      LONGEST svalue = extract_signed_integer (valaddr, TYPE_LENGTH (type));
+      if (scm_inferior_print (svalue, stream, format,
+			      deref_ref, recurse, pretty) >= 0)
+	{
+	}
+      else
+	{
+	  scm_scmval_print (svalue, stream, format,
+			      deref_ref, recurse, pretty);
+	}
+
+      gdb_flush (stream);
+      return (0);
+    }
+  else
+    {
+      return c_val_print (type, valaddr, 0, address, stream, format,
+			  deref_ref, recurse, pretty);
+    }
+}
+
+int
+scm_value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  return (val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), 0,
+		     VALUE_ADDRESS (val), stream, format, 1, 0, pretty));
+}
diff --git a/gdb/ser-e7kpc.c b/gdb/ser-e7kpc.c
new file mode 100644
index 0000000..8be5db9
--- /dev/null
+++ b/gdb/ser-e7kpc.c
@@ -0,0 +1,470 @@
+/* Remote serial interface using Hitachi E7000 PC ISA card in a PC
+   Copyright 1994, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if defined __GO32__ || defined _WIN32
+#include "defs.h"
+#include "serial.h"
+#include "gdb_string.h"
+
+/* MSVC uses strnicmp instead of strncasecmp */
+#ifdef _MSC_VER
+#define strncasecmp strnicmp
+#define WIN32_LEAN_AND_MEAN
+#endif
+
+#ifdef _WIN32
+#include <windows.h>
+#endif
+
+#ifdef __GO32__
+#include <sys/dos.h>
+#endif
+
+static int e7000pc_open PARAMS ((serial_t scb, const char *name));
+static void e7000pc_raw PARAMS ((serial_t scb));
+static int e7000pc_readchar PARAMS ((serial_t scb, int timeout));
+static int e7000pc_setbaudrate PARAMS ((serial_t scb, int rate));
+static int e7000pc_write PARAMS ((serial_t scb, const char *str, int len));
+static void e7000pc_close PARAMS ((serial_t scb));
+static serial_ttystate e7000pc_get_tty_state PARAMS ((serial_t scb));
+static int e7000pc_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+
+#define OFF_DPD 	0x0000
+#define OFF_DDP 	0x1000
+#define OFF_CPD 	0x2000
+#define OFF_CDP 	0x2400
+#define OFF_FA  	0x3000
+#define OFF_FB  	0x3002
+#define OFF_FC  	0x3004
+#define OFF_IRQTOD	0x3008
+#define OFF_IRQTOP 	0x300a
+#define OFF_READY  	0x300c
+#define OFF_PON    	0x300e
+
+#define IDLE       0x0000           
+#define CMD_CI     0x4349           
+#define CMD_CO     0x434f           
+#define CMD_LO     0x4c4f           
+#define CMD_LS     0x4c53           
+#define CMD_SV     0x5356           
+#define CMD_SS     0x5353           
+#define CMD_OK     0x4f4b           
+#define CMD_ER     0x4552           
+#define CMD_NF     0x4e46           
+#define CMD_AB     0x4142           
+#define CMD_ED     0x4544           
+#define CMD_CE     0x4345           
+
+static unsigned long fa;
+static unsigned long irqtod;
+static unsigned long ready;
+static unsigned long fb;
+static unsigned long cpd ;
+static unsigned long cdp ;
+static unsigned long ready;
+static unsigned long pon;
+static unsigned long irqtop;
+static unsigned long board_at;
+
+#ifdef __GO32__
+
+#define SET_BYTE(x,y)   { char _buf = y;dosmemput(&_buf,1, x);}
+#define SET_WORD(x,y)   { short _buf = y;dosmemput(&_buf,2, x);}
+#define GET_BYTE(x)     ( dosmemget(x,1,&bb), bb)
+#define GET_WORD(x)     ( dosmemget(x,2,&sb), sb)
+static unsigned char bb;
+static unsigned short sb;
+
+#else /* win32 */
+
+#define SET_BYTE(x,y)   *(volatile unsigned char *)(x) = (y)
+#define SET_WORD(x,y)   *(volatile unsigned short *)(x) = (y)
+#define GET_BYTE(x)     (*(volatile unsigned char *)(x))
+#define GET_WORD(x)     (*(volatile unsigned short *)(x))
+#define dosmemget(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN))
+#define dosmemput(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN))
+#endif
+
+static struct sw 
+{
+  int sw;
+  int addr;
+} sigs[] = {
+  {0x14, 0xd0000},
+  {0x15, 0xd4000},
+  {0x16, 0xd8000},
+  {0x17, 0xdc000},
+  0};
+
+#ifdef _MSC_VER
+/* Get the base of the data segment.  This is needed to calculate the offset
+   between data segment addresses and the base of linear memory, which is where
+   device registers reside.  Note that this is really only necessary for
+   Win32s, since Win95 and NT keep the data segment at linear 0.  */
+
+static unsigned long
+get_ds_base (void)
+{
+  unsigned short dsval;
+  LDT_ENTRY ldt;
+  unsigned long dsbase;
+
+  __asm
+    {
+      mov dsval,ds
+    }
+
+  dsbase = 0;
+
+  GetThreadSelectorEntry (GetCurrentThread(), dsval, &ldt);
+
+  dsbase = ldt.HighWord.Bits.BaseHi << 24 | ldt.HighWord.Bits.BaseMid << 16
+	     | ldt.BaseLow;
+
+  return dsbase;
+}
+#else /* !_MSC_VER */
+#define get_ds_base() 0
+#endif /* _MSC_VER */ 
+
+static int
+e7000pc_init ()
+{
+  int try;
+  unsigned long dsbase;
+  
+  dsbase = get_ds_base ();
+
+  /* Look around in memory for the board's signature */
+
+  for (try = 0; sigs[try].sw; try++)
+    {
+      int val;
+      board_at = sigs[try].addr - dsbase;
+      fa = board_at + OFF_FA;
+      fb = board_at + OFF_FB;
+      cpd = board_at + OFF_CPD;
+      cdp = board_at + OFF_CDP;
+      ready =board_at + OFF_READY;
+      pon = board_at + OFF_PON;	      
+      irqtop = board_at + OFF_IRQTOP;
+      irqtod = board_at + OFF_IRQTOD;
+      
+      val = GET_WORD (ready);
+
+      if (val == (0xaaa0  | sigs[try].sw))
+	{
+	  if (GET_WORD (pon) & 0xf)
+	    {
+	      SET_WORD (fa, 0);
+	      SET_WORD (fb, 0);
+
+	      SET_WORD (irqtop, 1); /* Disable interrupts from e7000 */
+	      SET_WORD (ready, 1);
+	      printf_filtered ("\nConnected to the E7000PC at address 0x%x\n", 
+			       sigs[try].addr);
+	      return 1;	      
+	    }
+	  error ("The E7000 PC board is working, but the E7000 is turned off.\n");
+	  return 0;
+	}
+    }
+
+  error ("GDB cannot connect to the E7000 PC board, check that it is installed\n\
+and that the switch settings are correct.  Some other DOS programs can \n\
+stop the board from working.  Try starting from a very minimal boot, \n\
+perhaps you need to disable EMM386 over the region where the board has\n\
+its I/O space, remove other unneeded cards, etc etc\n");
+  return 0;
+
+}
+
+static int pbuf_size;
+static int pbuf_index;
+
+/* Return next byte from cdp.  If no more, then return -1.  */
+
+static int 
+e7000_get (void)
+{
+  static char pbuf[1000];
+  char tmp[1000];
+  int x;
+
+  if (pbuf_index < pbuf_size) 
+    {
+      x = pbuf[pbuf_index++];
+    }
+  else if ((GET_WORD (fb) & 1))
+    {
+      int i;
+      pbuf_size = GET_WORD (cdp + 2);
+
+      dosmemget (cdp + 8, pbuf_size + 1, tmp);
+
+      /* Tell the E7000 we've eaten */
+      SET_WORD (fb, 0);	
+      /* Swap it around */
+      for (i = 0; i < pbuf_size; i++) 
+	{
+	  pbuf[i] = tmp[i^1];
+	}
+      pbuf_index = 0;
+      x =  pbuf[pbuf_index++];
+    }
+  else 
+    { 
+      x = -1;
+    }
+  return x;
+}
+
+/* Works just like read(), except that it takes a TIMEOUT in seconds.  Note
+   that TIMEOUT == 0 is a poll, and TIMEOUT == -1 means wait forever. */
+
+static int
+dosasync_read (fd, buf, len, timeout)
+     int fd;
+     char *buf;
+     int len;
+     int timeout;
+
+{
+  long now;
+  long then;
+  int i = 0;
+
+  /* Then look for some more if we're still hungry */
+  time (&now);
+  then = now + timeout;
+  while (i < len)
+    {
+      int ch = e7000_get();
+      
+      /* While there's room in the buffer, and we've already
+	 read the stuff in, suck it over */
+      if (ch != -1) 
+	{
+	  buf[i++] = ch;
+	  while (i < len && pbuf_index < pbuf_size )
+	    {
+	      ch = e7000_get();
+	      if (ch == -1)
+		break;
+	      buf[i++] = ch;
+	    }
+	}
+
+      time (&now);
+
+      if (timeout == 0)
+	return i;
+      if (now >= then && timeout > 0)
+	{
+	  return i;
+	}
+    }
+  return len;
+}
+
+
+static int
+dosasync_write (fd, buf, len)
+     int fd;
+     const char *buf;
+     int len;
+{
+  int i;
+  char dummy[1000];  
+  
+  /* Construct copy locally */
+  ((short *)dummy)[0] = CMD_CI;
+  ((short *)dummy)[1] = len;
+  ((short *)dummy)[2] = 0;
+  ((short *)dummy)[3] = 0;
+  for (i = 0; i < len ; i++) 
+    {
+      dummy[8 + i ^ 1] = buf[i];
+    }
+
+  /* Wait for the card to get ready */
+  while (GET_WORD (fa) & 1) ;
+
+  /* Blast onto the ISA card */
+  dosmemput (dummy, 8 + len + 1,  cpd);
+
+  SET_WORD (fa, 1);
+  SET_WORD (irqtod, 1); /* Interrupt the E7000 */
+
+  return len;
+}
+
+static int
+e7000pc_open (scb, name)
+     serial_t scb;
+     const char *name;
+{
+  if (strncasecmp (name, "pc", 2) != 0)
+    {
+      errno = ENOENT;
+      return -1;
+    }
+
+  scb->fd = e7000pc_init ();
+
+  if (!scb->fd)
+    return -1;
+
+  return 0;
+}
+
+static int
+e7000pc_noop (scb)
+     serial_t scb;
+{
+  return 0;
+}
+
+static void
+e7000pc_raw (scb)
+     serial_t scb;
+{
+  /* Always in raw mode */
+}
+
+static int
+e7000pc_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  char buf;
+
+ top:
+
+  if (dosasync_read (scb->fd, &buf, 1, timeout))
+    {
+      if (buf == 0) goto top;
+      return buf;
+    }
+  else
+    return SERIAL_TIMEOUT;
+}
+
+struct e7000pc_ttystate {
+  int dummy;
+};
+
+/* e7000pc_{get set}_tty_state() are both dummys to fill out the function
+   vector.  Someday, they may do something real... */
+
+static serial_ttystate
+e7000pc_get_tty_state (scb)
+     serial_t scb;
+{
+  struct e7000pc_ttystate *state;
+
+  state = (struct e7000pc_ttystate *) xmalloc (sizeof *state);
+
+  return (serial_ttystate) state;
+}
+
+static int
+e7000pc_set_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  return 0;
+}
+
+static int
+e7000pc_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  return 0;
+}
+
+static void
+e7000pc_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  /* Nothing to print.  */
+  return;
+}
+
+static int
+e7000pc_setbaudrate (scb, rate)
+     serial_t scb;
+     int rate;
+{
+  return 0;
+}
+
+static int
+e7000pc_write (scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  dosasync_write (scb->fd, str, len);
+
+  return 0;
+}
+
+static void
+e7000pc_close (scb)
+     serial_t scb;
+{
+}
+
+static struct serial_ops e7000pc_ops =
+{
+  "pc",
+  0,
+  e7000pc_open,
+  e7000pc_close,
+  e7000pc_readchar,
+  e7000pc_write,
+  e7000pc_noop,			/* flush output */
+  e7000pc_noop,			/* flush input */
+  e7000pc_noop,			/* send break -- currently used only for nindy */
+  e7000pc_raw,
+  e7000pc_get_tty_state,
+  e7000pc_set_tty_state,
+  e7000pc_print_tty_state,
+  e7000pc_noflush_set_tty_state,
+  e7000pc_setbaudrate,
+  e7000pc_noop,			/* wait for output to drain */
+};
+
+void
+_initialize_ser_e7000pc ()
+{
+  serial_add_interface (&e7000pc_ops);
+}
+#else
+
+void
+_initialize_ser_e7000pc ()
+{
+
+}
+#endif
diff --git a/gdb/ser-go32.c b/gdb/ser-go32.c
new file mode 100644
index 0000000..f776161
--- /dev/null
+++ b/gdb/ser-go32.c
@@ -0,0 +1,958 @@
+/* Remote serial interface for local (hardwired) serial ports for
+   GO32.  Copyright 1992, 1993 Free Software Foundation, Inc.
+
+   Contributed by Nigel Stephens, Algorithmics Ltd. (nigel@algor.co.uk).
+
+   This version uses DPMI interrupts to handle buffered i/o 
+   without the separate "asynctsr" program.
+
+   This file is part of GDB.  
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcmd.h"
+#include "serial.h"
+
+
+/*
+ * NS16550 UART registers
+ */
+
+#define COM1ADDR	0x3f8
+#define COM2ADDR	0x2f8
+#define COM3ADDR	0x3e8
+#define COM4ADDR	0x3e0
+
+#define	com_data	0	/* data register (R/W) */
+#define	com_dlbl	0	/* divisor latch low (W) */
+#define	com_ier		1	/* interrupt enable (W) */
+#define	com_dlbh	1	/* divisor latch high (W) */
+#define	com_iir		2	/* interrupt identification (R) */
+#define	com_fifo	2	/* FIFO control (W) */
+#define	com_lctl	3	/* line control register (R/W) */
+#define	com_cfcr	3	/* line control register (R/W) */
+#define	com_mcr		4	/* modem control register (R/W) */
+#define	com_lsr		5	/* line status register (R/W) */
+#define	com_msr		6	/* modem status register (R/W) */
+
+/*
+ * Constants for computing 16 bit baud rate divisor (lower byte
+ * in com_dlbl, upper in com_dlbh) from 1.8432MHz crystal.  Divisor is
+ * 1.8432 MHz / (16 * X) for X bps.  If the baud rate can't be set
+ * to within +- (desired_rate*SPEED_TOLERANCE/1000) bps, we fail.
+ */
+#define COMTICK		(1843200/16)
+#define SPEED_TOLERANCE	30	/* thousandths; real == desired +- 3.0% */
+
+/* interrupt enable register */
+#define	IER_ERXRDY	0x1	/* int on rx ready */
+#define	IER_ETXRDY	0x2	/* int on tx ready */
+#define	IER_ERLS	0x4	/* int on line status change */
+#define	IER_EMSC	0x8	/* int on modem status change */
+
+/* interrupt identification register */
+#define	IIR_FIFO_MASK	0xc0	/* set if FIFOs are enabled */
+#define	IIR_IMASK	0xf	/* interrupt cause mask */
+#define	IIR_NOPEND	0x1	/* nothing pending */
+#define	IIR_RLS		0x6	/* receive line status */
+#define	IIR_RXRDY	0x4	/* receive ready */
+#define	IIR_RXTOUT	0xc	/* receive timeout */
+#define	IIR_TXRDY	0x2	/* transmit ready */
+#define	IIR_MLSC	0x0	/* modem status */
+
+
+/* fifo control register */
+#define	FIFO_ENABLE	0x01	/* enable fifo */
+#define	FIFO_RCV_RST	0x02	/* reset receive fifo */
+#define	FIFO_XMT_RST	0x04	/* reset transmit fifo */
+#define	FIFO_DMA_MODE	0x08	/* enable dma mode */
+#define	FIFO_TRIGGER_1	0x00	/* trigger at 1 char */
+#define	FIFO_TRIGGER_4	0x40	/* trigger at 4 chars */
+#define	FIFO_TRIGGER_8	0x80	/* trigger at 8 chars */
+#define	FIFO_TRIGGER_14	0xc0	/* trigger at 14 chars */
+
+/* character format control register */
+#define	CFCR_DLAB	0x80	/* divisor latch */
+#define	CFCR_SBREAK	0x40	/* send break */
+#define	CFCR_PZERO	0x30	/* zero parity */
+#define	CFCR_PONE	0x20	/* one parity */
+#define	CFCR_PEVEN	0x10	/* even parity */
+#define	CFCR_PODD	0x00	/* odd parity */
+#define	CFCR_PENAB	0x08	/* parity enable */
+#define	CFCR_STOPB	0x04	/* 2 stop bits */
+#define	CFCR_8BITS	0x03	/* 8 data bits */
+#define	CFCR_7BITS	0x02	/* 7 data bits */
+#define	CFCR_6BITS	0x01	/* 6 data bits */
+#define	CFCR_5BITS	0x00	/* 5 data bits */
+
+/* modem control register */
+#define	MCR_LOOPBACK	0x10	/* loopback */
+#define	MCR_IENABLE	0x08	/* output 2 = int enable */
+#define	MCR_DRS		0x04	/* output 1 = xxx */
+#define	MCR_RTS		0x02	/* enable RTS */
+#define	MCR_DTR		0x01	/* enable DTR */
+
+/* line status register */
+#define	LSR_RCV_FIFO	0x80	/* error in receive fifo */
+#define	LSR_TSRE	0x40	/* transmitter empty */
+#define	LSR_TXRDY	0x20	/* transmitter ready */
+#define	LSR_BI		0x10	/* break detected */
+#define	LSR_FE		0x08	/* framing error */
+#define	LSR_PE		0x04	/* parity error */
+#define	LSR_OE		0x02	/* overrun error */
+#define	LSR_RXRDY	0x01	/* receiver ready */
+#define	LSR_RCV_MASK	0x1f
+
+/* modem status register */
+#define	MSR_DCD		0x80
+#define	MSR_RI		0x40
+#define	MSR_DSR		0x20
+#define	MSR_CTS		0x10
+#define	MSR_DDCD	0x08
+#define	MSR_TERI	0x04
+#define	MSR_DDSR	0x02
+#define	MSR_DCTS	0x01
+
+#include <sys/dos.h>
+#include <sys/go32.h>
+#include <sys/dpmi.h>
+
+/* DPMI Communication */
+static union REGS dpmi_regs;
+static struct SREGS dpmi_sregs;
+
+/* 16550 rx fifo trigger point */
+#define FIFO_TRIGGER	FIFO_TRIGGER_4
+
+/* input buffer size */
+#define CBSIZE	4096
+
+/* return raw 18Hz clock count */
+extern long rawclock (void);
+
+#define RAWHZ	18
+
+#ifdef DOS_STATS
+#define CNT_RX		16
+#define CNT_TX		17
+#define CNT_STRAY	18
+#define CNT_ORUN	19
+#define NCNT		20
+
+static int	intrcnt;
+static int	cnts[NCNT];
+static char	*cntnames[NCNT] = {
+  /* h/w interrupt counts. */
+  "mlsc",	"nopend",	"txrdy",	"?3",
+  "rxrdy",	"?5",		"rls", 		"?7", 
+  "?8", 	"?9", 		"?a", 		"?b", 
+  "rxtout", 	"?d", 		"?e",		"?f", 
+  /* s/w counts. */
+  "rxcnt",	"txcnt",	"stray",	"swoflo"
+};
+
+#define COUNT(x) cnts[x]++
+#else
+#define COUNT(x) 
+#endif
+
+/* Main interrupt controller port addresses. */
+#define ICU_BASE	0x20
+#define ICU_OCW2	(ICU_BASE + 0)
+#define ICU_MASK	(ICU_BASE + 1)
+
+/* Original interrupt controller mask register. */
+unsigned char	icu_oldmask;
+
+/* Maximum of 8 interrupts (we don't handle the slave icu yet). */
+#define NINTR	8
+
+static struct intrupt
+{  
+  char			inuse;
+  struct dos_ttystate	*port;
+  _go32_dpmi_seginfo	old_rmhandler;
+  _go32_dpmi_seginfo	old_pmhandler;
+  _go32_dpmi_seginfo	new_rmhandler;
+  _go32_dpmi_seginfo	new_pmhandler;
+  _go32_dpmi_registers	regs;
+} intrupts[NINTR];
+
+
+static struct dos_ttystate
+{
+  int		base;
+  int		irq;
+  int		refcnt;
+  struct intrupt *intrupt;
+  int		fifo;
+  int		baudrate;
+  unsigned char	cbuf[CBSIZE];
+  unsigned int	first;
+  unsigned int	count;
+  int		txbusy;
+  unsigned char	old_mcr;
+  int		ferr;
+  int		perr;
+  int		oflo;
+  int		msr;
+} ports[4] = {
+  {COM1ADDR, 4}, 
+  {COM2ADDR, 3}, 
+  {COM3ADDR, 4}, 
+  {COM4ADDR, 3}
+};
+
+static int dos_open PARAMS ((serial_t scb, const char *name));
+static void dos_raw PARAMS ((serial_t scb));
+static int dos_readchar PARAMS ((serial_t scb, int timeout));
+static int dos_setbaudrate PARAMS ((serial_t scb, int rate));
+static int dos_write PARAMS ((serial_t scb, const char *str, int len));
+static void dos_close PARAMS ((serial_t scb));
+static serial_ttystate dos_get_tty_state PARAMS ((serial_t scb));
+static int dos_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static int dos_baudconv PARAMS ((int rate));
+
+#define inb(p,a)	inportb((p)->base + (a))
+#define outb(p,a,v)	outportb((p)->base + (a), (v))
+#define disable()	asm volatile ("cli");
+#define enable()	asm volatile ("sti");
+
+
+static int
+dos_getc (port)
+     volatile struct dos_ttystate *port;
+{
+    int c;
+
+    if (port->count == 0)
+      return -1;
+
+    c = port->cbuf[port->first];
+    disable ();
+    port->first = (port->first + 1) & (CBSIZE - 1);
+    port->count--;
+    enable ();
+    return c;
+}
+    
+
+static int 
+dos_putc (c, port)
+     int c;
+     struct dos_ttystate *port;
+{
+    if (port->count >= CBSIZE - 1)
+	return -1;
+    port->cbuf[(port->first + port->count) & (CBSIZE - 1)] = c;
+    port->count++;
+    return 0;
+}
+
+
+
+static void
+dos_comisr (irq)
+     int irq;
+{
+  struct dos_ttystate *port;
+  unsigned char iir, lsr, c;
+
+  disable ();			/* Paranoia */
+  outportb (ICU_OCW2, 0x20);	/* End-Of-Interrupt */
+#ifdef DOS_STATS
+  ++intrcnt;
+#endif
+
+  port = intrupts[irq].port;
+  if (!port) 
+    {
+      COUNT (CNT_STRAY);
+      return;		/* not open */
+    }
+
+  while (1)
+    {
+      iir = inb (port, com_iir) & IIR_IMASK;
+      switch (iir) 
+	{
+	  
+	case IIR_RLS:
+	  lsr = inb (port, com_lsr);
+	  goto rx;
+	  
+	case IIR_RXTOUT:
+	case IIR_RXRDY:
+	  lsr = 0;
+	  
+      rx:
+	  do 
+	    {
+	      c = inb (port, com_data);
+	      if (lsr & (LSR_BI | LSR_FE | LSR_PE | LSR_OE))
+		{
+		  if (lsr & (LSR_BI | LSR_FE))
+		    port->ferr++;
+		  else if (lsr & LSR_PE)
+		    port->perr++;
+		  if (lsr & LSR_OE)
+		    port->oflo++;
+		}
+
+	      if (dos_putc (c, port) < 0)
+		{
+		  COUNT (CNT_ORUN);
+		}
+	      else
+		{
+		  COUNT (CNT_RX);
+		}
+	    }
+	  while ((lsr = inb (port, com_lsr)) & LSR_RXRDY);
+	  break;
+	  
+	case IIR_MLSC:
+	  /* could be used to flowcontrol Tx */
+	  port->msr = inb (port, com_msr);
+	  break;
+	  
+	case IIR_TXRDY:
+	  port->txbusy = 0;
+	  break;
+
+	case IIR_NOPEND:
+	  /* no more pending interrupts, all done */
+	  return;
+
+	default:
+	  /* unexpected interrupt, ignore */
+	  break;
+	}
+      COUNT (iir);
+    } 
+}
+
+#ifdef __STDC__
+#define ISRNAME(x) dos_comisr##x
+#else
+#define ISRNAME(x) dos_comisr/**/x
+#endif
+#define ISR(x) static void ISRNAME(x)() {dos_comisr(x);}
+
+ISR(0) ISR(1) ISR(2) ISR(3)
+ISR(4) ISR(5) ISR(6) ISR(7)
+
+typedef void (*isr_t)();
+
+static isr_t isrs[NINTR] = {
+  ISRNAME(0), ISRNAME(1), ISRNAME(2), ISRNAME(3),
+  ISRNAME(4), ISRNAME(5), ISRNAME(6), ISRNAME(7)
+};
+
+
+
+static struct intrupt *
+dos_hookirq (irq)
+     unsigned int irq;
+{
+  struct intrupt *intr;
+  unsigned int vec;
+  isr_t isr;
+
+  if (irq >= NINTR)
+    return 0;
+
+  intr = &intrupts[irq];
+  if (intr->inuse)
+    return 0;
+  
+  vec = 0x08 + irq;
+  isr = isrs[irq];
+
+  /* setup real mode handler */
+  _go32_dpmi_get_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
+
+  intr->new_rmhandler.pm_selector = _go32_my_cs();
+  intr->new_rmhandler.pm_offset = (u_long)isr;
+  if (_go32_dpmi_allocate_real_mode_callback_iret (&intr->new_rmhandler,
+						   &intr->regs))
+    {
+      return 0;
+    }
+
+  if (_go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->new_rmhandler))
+    {
+      return 0;
+    }
+      
+  /* setup protected mode handler */
+  _go32_dpmi_get_protected_mode_interrupt_vector(vec, &intr->old_pmhandler);
+
+  intr->new_pmhandler.pm_selector = _go32_my_cs();
+  intr->new_pmhandler.pm_offset = (u_long)isr;
+  _go32_dpmi_allocate_iret_wrapper (&intr->new_pmhandler);
+
+  if (_go32_dpmi_set_protected_mode_interrupt_vector(vec, &intr->new_pmhandler))
+    {
+      return 0;
+    }
+
+  /* setup interrupt controller mask */
+  disable ();
+  outportb (ICU_MASK, inportb (ICU_MASK) & ~(1 << irq));
+  enable ();
+
+  intr->inuse = 1;
+  return intr;
+}
+
+
+static void
+dos_unhookirq (intr)
+     struct intrupt *intr;
+{
+  unsigned int irq, vec;
+  unsigned char mask;
+
+  irq = intr - intrupts;
+  vec = 0x08 + irq;
+
+  /* restore old interrupt mask bit */
+  mask = 1 << irq;
+  disable ();
+  outportb (ICU_MASK, inportb (ICU_MASK) | (mask & icu_oldmask));
+  enable ();
+
+  /* remove real mode handler */
+  _go32_dpmi_set_real_mode_interrupt_vector (vec, &intr->old_rmhandler);
+  _go32_dpmi_free_real_mode_callback (&intr->new_rmhandler);
+      
+  /* remove protected mode handler */
+  _go32_dpmi_set_protected_mode_interrupt_vector (vec, &intr->old_pmhandler);
+  _go32_dpmi_free_iret_wrapper (&intr->new_pmhandler);
+  intr->inuse = 0;
+}
+
+
+
+static int
+dos_open (scb, name)
+     serial_t scb;
+     const char *name;
+{
+  struct dos_ttystate *port;
+  int fd, i;
+
+  if (strncasecmp (name, "/dev/", 5) == 0)
+    name += 5;
+  else if (strncasecmp (name, "\\dev\\", 5) == 0)
+    name += 5;
+
+  if (strlen (name) != 4 || strncasecmp (name, "com", 3) != 0)
+    {
+      errno = ENOENT;
+      return -1;
+    }
+
+  if (name[3] < '1' || name[3] > '4')
+    {
+      errno = ENOENT;
+      return -1;
+    }
+
+  fd = name[3] - '1';
+  port = &ports[fd];
+  if (port->refcnt++ > 0)
+    {
+      /* Device already opened another user.  Just point at it. */
+      scb->fd = fd;
+      return 0;
+    }
+
+  /* force access to ID reg */
+  outb(port, com_cfcr, 0);
+  outb(port, com_iir, 0);
+  for (i = 0; i < 17; i++) {
+    if ((inb(port, com_iir) & 0x38) == 0)
+      goto ok;
+    (void) inb(port, com_data); /* clear recv */
+  }
+  errno = ENODEV;
+  return -1;
+
+ok:
+  /* disable all interrupts in chip */
+  outb(port, com_ier, 0);
+
+  /* tentatively enable 16550 fifo, and see if it responds */
+  outb(port, com_fifo, FIFO_ENABLE|FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER);
+  sleep(1);
+  port->fifo = ((inb(port, com_iir) & IIR_FIFO_MASK) == IIR_FIFO_MASK);
+
+  /* clear pending status reports. */
+  (void) inb(port, com_lsr);
+  (void) inb(port, com_msr);
+
+  /* enable external interrupt gate (to avoid floating IRQ) */
+  outb(port, com_mcr, MCR_IENABLE);
+
+  /* hook up interrupt handler and initialise icu */
+  port->intrupt = dos_hookirq (port->irq);
+  if (!port->intrupt)
+    {
+      outb(port, com_mcr, 0);
+      outb(port, com_fifo, 0);
+      errno = ENODEV;
+      return -1;
+    }
+
+  disable ();
+
+  /* record port */
+  port->intrupt->port = port; 
+  scb->fd = fd;
+
+  /* clear rx buffer, tx busy flag and overflow count */
+  port->first = port->count = 0;
+  port->txbusy = 0;
+  port->oflo = 0;
+
+  /* set default baud rate and mode: 9600,8,n,1 */
+  i = dos_baudconv (port->baudrate = 9600);
+  outb(port, com_cfcr, CFCR_DLAB);
+  outb(port, com_dlbl, i & 0xff);
+  outb(port, com_dlbh, i >> 8);
+  outb(port, com_cfcr, CFCR_8BITS);
+
+  /* enable all interrupts */
+  outb(port, com_ier, IER_ETXRDY | IER_ERXRDY | IER_ERLS | IER_EMSC);
+
+  /* enable DTR & RTS */
+  outb(port, com_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE);
+
+  enable ();
+
+  return 0;
+}
+
+
+static void
+dos_close (scb)
+     serial_t scb;
+{
+    struct dos_ttystate *port;
+    struct intrupt *intrupt;
+
+    if (!scb)
+      return;
+
+    port = &ports[scb->fd];
+
+    if (port->refcnt-- > 1)
+      return;
+
+    if (!(intrupt = port->intrupt))
+      return;
+
+    /* disable interrupts, fifo, flow control */
+    disable ();
+    port->intrupt = 0;
+    intrupt->port = 0;
+    outb(port, com_fifo, 0);
+    outb(port, com_ier, 0);
+    enable ();
+
+    /* unhook handler, and disable interrupt gate */
+    dos_unhookirq (intrupt);
+    outb(port, com_mcr, 0);
+
+    /* Check for overflow errors */
+    if (port->oflo)
+      {
+	fprintf_unfiltered (gdb_stderr,
+			    "Serial input overruns occurred.\n");
+	fprintf_unfiltered (gdb_stderr, "This system %s handle %d baud.\n",
+			    port->fifo ? "cannot" : "needs a 16550 to",
+			    port->baudrate);
+      }
+}
+
+
+
+static int
+dos_noop (scb)
+     serial_t scb;
+{
+  return 0;
+}
+
+static void
+dos_raw (scb)
+     serial_t scb;
+{
+  /* Always in raw mode */
+}
+
+static int
+dos_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  struct dos_ttystate *port = &ports[scb->fd];
+  long then;
+  int c;
+
+  then = rawclock() + (timeout * RAWHZ);
+  while ((c = dos_getc (port)) < 0)
+    {
+      if (timeout >= 0 && (rawclock () - then) >= 0)
+	return SERIAL_TIMEOUT;
+      notice_quit ();
+    }
+
+  return c;
+}
+
+
+static serial_ttystate
+dos_get_tty_state (scb)
+     serial_t scb;
+{
+  struct dos_ttystate *port = &ports[scb->fd];
+  struct dos_ttystate *state;
+
+  state = (struct dos_ttystate *) xmalloc (sizeof *state);
+  *state = *port;
+  return (serial_ttystate) state;
+}
+
+static int
+dos_set_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  struct dos_ttystate *state;
+
+  state = (struct dos_ttystate *) ttystate;
+  dos_setbaudrate (scb, state->baudrate);
+  return 0;
+}
+
+static int
+dos_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  struct dos_ttystate *state;
+
+  state = (struct dos_ttystate *) new_ttystate;
+  dos_setbaudrate (scb, state->baudrate);
+  return 0;
+}
+
+static int
+dos_flush_input (scb)
+     serial_t scb;
+{
+  struct dos_ttystate *port = &ports[scb->fd];
+  disable();
+  port->first = port->count = 0;
+  if (port->fifo)
+    outb(port, com_fifo, FIFO_ENABLE|FIFO_RCV_RST|FIFO_TRIGGER);
+  enable();
+}
+
+static void
+dos_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  /* Nothing to print */
+  return;
+}
+
+static int
+dos_baudconv (rate)
+     int rate;
+{
+  long x, err;
+  
+  if (rate <= 0) 
+    return -1;
+
+#define divrnd(n, q)	(((n) * 2 / (q) + 1) / 2) /* divide and round off */
+  x = divrnd(COMTICK, rate);
+  if (x <= 0)
+    return -1;
+  
+  err = divrnd(1000 * COMTICK, x * rate) - 1000;
+  if (err < 0)
+    err = -err;
+  if (err > SPEED_TOLERANCE)
+    return -1;
+#undef divrnd
+  return x;
+}
+
+
+static int
+dos_setbaudrate (scb, rate)
+     serial_t scb;
+     int rate;
+{
+    struct dos_ttystate *port = &ports[scb->fd];
+
+    if (port->baudrate != rate) 
+      {
+	int x;
+	unsigned char cfcr;
+
+	x = dos_baudconv (rate);
+	if (x <= 0)
+	  {
+	    fprintf_unfiltered (gdb_stderr, "%d: impossible baudrate\n", rate);
+	    errno = EINVAL;
+	    return -1;
+	  }
+
+	disable ();
+	cfcr = inb (port, com_cfcr);
+
+	outb(port, com_cfcr, CFCR_DLAB);
+	outb(port, com_dlbl, x & 0xff);
+	outb(port, com_dlbh, x >> 8);
+	outb(port, com_cfcr, cfcr);
+	port->baudrate = rate;
+	enable ();
+      }
+
+    return 0;
+}
+
+static int
+dos_setstopbits (scb, num)
+     serial_t scb;
+     int num;
+{
+    struct dos_ttystate *port = &ports[scb->fd];
+    unsigned char cfcr;
+
+    disable ();
+    cfcr = inb (port, com_cfcr);
+
+    switch (num)
+      {
+      case SERIAL_1_STOPBITS:
+	outb (port, com_cfcr, cfcr & ~CFCR_STOPB);
+	break;
+      case SERIAL_1_AND_A_HALF_STOPBITS:
+      case SERIAL_2_STOPBITS:
+	outb (port, com_cfcr, cfcr | CFCR_STOPB);
+	break;
+      default:
+	enable ();
+	return 1;
+      }
+    enable ();
+
+    return 0;
+}
+
+static int
+dos_write (scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  volatile struct dos_ttystate *port = &ports[scb->fd];
+  int fifosize = port->fifo ? 16 : 1;
+  long then;
+  int cnt;
+
+   while (len > 0) 
+     {
+	/* send the data, fifosize bytes at a time */
+	cnt = fifosize > len ? len : fifosize;
+	port->txbusy = 1;
+	outportsb (port->base + com_data, str, cnt);
+	str += cnt;
+	len -= cnt;
+#ifdef DOS_STATS
+	cnts[CNT_TX] += cnt;
+#endif
+	/* wait for transmission to complete (max 1 sec) */
+	then = rawclock() + RAWHZ;
+	while (port->txbusy)
+	  {
+	    if ((rawclock () - then) >= 0)
+	      {
+		  errno = EIO;
+		  return SERIAL_ERROR;
+	      }
+	  }
+    }
+  return 0;
+}
+
+
+static int
+dos_sendbreak (scb)
+     serial_t scb;
+{
+  volatile struct dos_ttystate *port = &ports[scb->fd];
+  unsigned char cfcr;
+  long then;
+
+  cfcr = inb(port, com_cfcr);
+  outb(port, com_cfcr, cfcr | CFCR_SBREAK);
+
+  /* 0.25 sec delay */
+  then = rawclock () + RAWHZ / 4;
+  while ((rawclock () - then) < 0)
+    continue;
+
+  outb(port, com_cfcr, cfcr);
+  return 0;
+}
+
+
+static struct serial_ops dos_ops =
+{
+  "hardwire",
+  0,
+  dos_open,
+  dos_close,
+  dos_readchar,
+  dos_write,
+  dos_noop,			/* flush output */
+  dos_flush_input,
+  dos_sendbreak,
+  dos_raw,
+  dos_get_tty_state,
+  dos_set_tty_state,
+  dos_print_tty_state,
+  dos_noflush_set_tty_state,
+  dos_setbaudrate,
+  dos_setstopbits,
+  dos_noop,			/* wait for output to drain */
+};
+
+
+static void
+dos_info (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct dos_ttystate *port;
+  int i;
+
+  for (port = ports; port < &ports[4]; port++) 
+    {
+      if (port->baudrate == 0)
+	continue;
+      printf_filtered ("Port:\tCOM%d (%sactive)\n", port - ports + 1,
+		       port->intrupt ? "" : "not ");
+      printf_filtered ("Addr:\t0x%03x (irq %d)\n", port->base, port->irq);
+      printf_filtered ("16550:\t%s\n", port->fifo ? "yes" : "no");
+      printf_filtered ("Speed:\t%d baud\n", port->baudrate);
+      printf_filtered ("Errs:\tframing %d parity %d overflow %d\n\n", 
+		       port->ferr, port->perr, port->oflo);
+    }
+
+#ifdef DOS_STATS
+  printf_filtered ("\nTotal interrupts: %d\n", intrcnt);
+  for (i = 0; i < NCNT; i++)
+    if (cnts[i])
+      printf_filtered ("%s:\t%d\n", cntnames[i], cnts[i]);
+#endif
+}
+
+
+void
+_initialize_ser_dos ()
+{
+  struct cmd_list_element *c;
+
+  serial_add_interface (&dos_ops);
+
+  /* Save original interrupt mask register. */
+  icu_oldmask = inportb (ICU_MASK);
+
+  /* Mark fixed motherboard irqs as inuse. */
+  intrupts[0].inuse =		/* timer tick */
+    intrupts[1].inuse =		/* keyboard */
+      intrupts[2].inuse = 1;	/* slave icu */
+    
+  add_show_from_set (
+    add_set_cmd ("com1base", class_obscure, var_zinteger,
+		 (char *) &ports[0].base,
+		 "Set COM1 base i/o port address.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com1irq", class_obscure, var_zinteger,
+		 (char *) &ports[0].irq,
+		 "Set COM1 interrupt request.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com2base", class_obscure, var_zinteger,
+		 (char *) &ports[1].base,
+		 "Set COM2 base i/o port address.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com2irq", class_obscure, var_zinteger,
+		 (char *) &ports[1].irq,
+		 "Set COM2 interrupt request.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com3base", class_obscure, var_zinteger,
+		 (char *) &ports[2].base,
+		 "Set COM3 base i/o port address.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com3irq", class_obscure, var_zinteger,
+		 (char *) &ports[2].irq,
+		 "Set COM3 interrupt request.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com4base", class_obscure, var_zinteger,
+		 (char *) &ports[3].base,
+		 "Set COM4 base i/o port address.",
+		 &setlist),
+	&showlist);
+
+  add_show_from_set (
+    add_set_cmd ("com4irq", class_obscure, var_zinteger,
+		 (char *) &ports[3].irq,
+		 "Set COM4 interrupt request.",
+		 &setlist),
+	&showlist);
+
+  add_info ("serial", dos_info,
+	    "Print DOS serial port status.");
+}
diff --git a/gdb/ser-mac.c b/gdb/ser-mac.c
new file mode 100644
index 0000000..df0040e
--- /dev/null
+++ b/gdb/ser-mac.c
@@ -0,0 +1,362 @@
+/* Remote serial interface for local (hardwired) serial ports for Macintosh.
+   Copyright 1994 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Stan Shebs.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+
+#include <Types.h>
+#include <Devices.h>
+/* This is the regular Mac Serial.h, but copied to a different name
+   so as not to get confused with the GDB serial.h above.  */
+#include "MacSerial.h"
+
+/* This is unused for now.  We just return a placeholder. */
+
+struct mac_ttystate
+  {
+    int bogus;
+  };
+
+static int mac_open PARAMS ((serial_t scb, const char *name));
+static void mac_raw PARAMS ((serial_t scb));
+static int mac_readchar PARAMS ((serial_t scb, int timeout));
+static int mac_setbaudrate PARAMS ((serial_t scb, int rate));
+static int mac_write PARAMS ((serial_t scb, const char *str, int len));
+static void mac_close PARAMS ((serial_t scb));
+static serial_ttystate mac_get_tty_state PARAMS ((serial_t scb));
+static int mac_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static char *aptr PARAMS ((short p));
+
+short input_refnum;
+short output_refnum;
+
+char *mac_input_buffer;
+char *mac_output_buffer;
+
+static int
+mac_open (scb, name)
+     serial_t scb;
+     const char *name;
+{
+  OSErr err;
+
+  /* Alloc buffer space first - that way any allocation failures are
+     intercepted before the serial driver gets involved. */
+  if (mac_input_buffer == NULL)
+    mac_input_buffer = (char *) xmalloc (4096);
+  /* Match on a name and open a port. */
+  if (strcmp (name, "modem") == 0)
+    {
+      err = OpenDriver ("\p.AIn", &input_refnum);
+      if (err != 0)
+	{
+	  return (-1);
+	}
+      err = OpenDriver ("\p.AOut", &output_refnum);
+      if (err != 0)
+	{
+	  CloseDriver (input_refnum);
+	  return (-1);
+	}
+    }
+  else if (strcmp (name, "printer") == 0)
+    {
+      err = OpenDriver ("\p.BIn", &input_refnum);
+      if (err != 0)
+	{
+	  return (-1);
+	}
+      err = OpenDriver ("\p.BOut", &output_refnum);
+      if (err != 0)
+	{
+	  CloseDriver (input_refnum);
+	  return (-1);
+	}
+      /* fake */
+      scb->fd = 1;
+      return 0;
+    }
+  else
+    {
+      error ("You must specify a valid serial port name; your choices are `modem' or `printer'.");
+      errno = ENOENT;
+      return (-1);
+    }
+  /* We got something open. */
+  if (1 /* using custom buffer */)
+    SerSetBuf (input_refnum, mac_input_buffer, 4096);
+  /* Set to a GDB-preferred state. */
+  SerReset (input_refnum,  stop10|noParity|data8|baud9600);
+  SerReset (output_refnum, stop10|noParity|data8|baud9600);
+  {
+    CntrlParam cb;
+    struct SerShk *handshake;
+
+    cb.ioCRefNum = output_refnum;
+    cb.csCode = 14;
+    handshake = (struct SerShk *) &cb.csParam[0];
+    handshake->fXOn = 0;
+    handshake->fCTS = 0;
+    handshake->xOn = 0;
+    handshake->xOff = 0;
+    handshake->errs = 0;
+    handshake->evts = 0;
+    handshake->fInX = 0;
+    handshake->fDTR = 0;
+    err = PBControl ((ParmBlkPtr) &cb, 0);
+    if (err < 0)
+      return (-1);
+  }
+  /* fake */
+  scb->fd = 1;
+  return 0;
+}
+
+static int
+mac_noop (scb)
+     serial_t scb;
+{
+  return 0;
+}
+
+static void
+mac_raw (scb)
+     serial_t scb;
+{
+  /* Always effectively in raw mode. */
+}
+
+/* Read a character with user-specified timeout.  TIMEOUT is number of seconds
+   to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
+   char if successful.  Returns -2 if timeout expired, EOF if line dropped
+   dead, or -3 for any other error (see errno in that case). */
+
+static int
+mac_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  int status, n;
+  /* time_t */ unsigned long start_time, now;
+  OSErr err;
+  CntrlParam cb;
+  IOParam pb;
+
+  if (scb->bufcnt-- > 0)
+    return *scb->bufp++;
+
+  time (&start_time);
+
+  while (1)
+    {
+      cb.ioCRefNum = input_refnum;
+      cb.csCode = 2;
+      err = PBStatus ((ParmBlkPtr) &cb, 0);
+      if (err < 0)
+	return SERIAL_ERROR;
+      n = *((long *) &cb.csParam[0]);
+      if (n > 0)
+	{
+	  pb.ioRefNum = input_refnum;
+	  pb.ioBuffer = (Ptr) (scb->buf);
+	  pb.ioReqCount = (n > 64 ? 64 : n);
+	  err = PBRead ((ParmBlkPtr) &pb, 0);
+	  if (err < 0)
+	    return SERIAL_ERROR;
+	  scb->bufcnt = pb.ioReqCount;
+	  scb->bufcnt--;
+	  scb->bufp = scb->buf;
+	  return *scb->bufp++;
+	}
+      else if (timeout == 0)
+	return SERIAL_TIMEOUT;
+      else if (timeout == -1)
+	;
+      else
+	{
+	  time (&now);
+	  if (now > start_time + timeout)
+	    return SERIAL_TIMEOUT;
+	}
+      PROGRESS (1);
+    }
+}
+
+/* mac_{get set}_tty_state() are both dummys to fill out the function
+   vector.  Someday, they may do something real... */
+
+static serial_ttystate
+mac_get_tty_state (scb)
+     serial_t scb;
+{
+  struct mac_ttystate *state;
+
+  state = (struct mac_ttystate *) xmalloc (sizeof *state);
+
+  return (serial_ttystate) state;
+}
+
+static int
+mac_set_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  return 0;
+}
+
+static int
+mac_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  return 0;
+}
+
+static void
+mac_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  /* Nothing to print.  */
+  return;
+}
+
+/* If there is a tricky formula to relate real baud rates
+   to what the serial driver wants, we should use it.  Until
+   we get one, this table will have to do.  */
+
+static struct {
+  int real_rate;
+  int bits;
+} mac_baud_rate_table[] = {
+  { 57600, baud57600 },
+  { 38400, 1 },
+  { 19200, baud19200 },
+  { 9600, baud9600 },
+  { 7200, baud7200 },
+  { 4800, baud4800 },
+  { 3600, baud3600 },
+  { 2400, baud2400 },
+  { 1800, baud1800 },
+  { 1200, baud1200 },
+  { 600, baud600 },
+  { 300, baud300 },
+  { 0, 0 }
+};
+
+static int
+mac_set_baud_rate (scb, rate)
+     serial_t scb;
+     int rate;
+{
+  int i, bits;
+
+  for (i = 0; mac_baud_rate_table[i].real_rate != 0; ++i)
+    {
+      if (mac_baud_rate_table[i].real_rate == rate)
+	{
+	  bits = mac_baud_rate_table[i].bits;
+	  break;
+	}
+    }
+  SerReset (input_refnum,  stop10|noParity|data8|bits);
+  SerReset (output_refnum, stop10|noParity|data8|bits);
+}
+
+static int
+mac_set_stop_bits (scb, num)
+     serial_t scb;
+     int num;
+{
+  return 0;
+}
+
+int first_mac_write = 0;
+
+static int
+mac_write (scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  OSErr err;
+  IOParam pb;
+
+  if (first_mac_write++ < 4)
+    {
+      sleep (1);
+    }
+  pb.ioRefNum = output_refnum;
+  pb.ioBuffer = (Ptr) str;
+  pb.ioReqCount = len;
+  err = PBWrite ((ParmBlkPtr) &pb, 0);
+  if (err < 0)
+    {
+      return 1;
+    }
+  return 0;
+}
+
+static void
+mac_close (serial_t scb)
+{
+  if (input_refnum)
+    {
+      if (1 /* custom buffer */)
+	SerSetBuf (input_refnum, mac_input_buffer, 0);
+      CloseDriver (input_refnum);
+      input_refnum = 0;
+    }
+  if (output_refnum)
+    {
+      if (0 /* custom buffer */)
+	SerSetBuf (input_refnum, mac_output_buffer, 0);
+      CloseDriver (output_refnum);
+      output_refnum = 0;
+    }
+}
+
+static struct serial_ops mac_ops =
+{
+  "hardwire",
+  0,
+  mac_open,
+  mac_close,
+  mac_readchar,
+  mac_write,
+  mac_noop,			/* flush output */
+  mac_noop,			/* flush input */
+  mac_noop,			/* send break -- currently only for nindy */
+  mac_raw,
+  mac_get_tty_state,
+  mac_set_tty_state,
+  mac_print_tty_state,
+  mac_noflush_set_tty_state,
+  mac_set_baud_rate,
+  mac_set_stop_bits,
+  mac_noop,			/* wait for output to drain */
+};
+
+void
+_initialize_ser_mac ()
+{
+  serial_add_interface (&mac_ops);
+}
diff --git a/gdb/ser-ocd.c b/gdb/ser-ocd.c
new file mode 100644
index 0000000..971f84e
--- /dev/null
+++ b/gdb/ser-ocd.c
@@ -0,0 +1,209 @@
+/* Remote serial interface for Macraigor Systems implementation of
+	On-Chip Debugging using serial target box or serial wiggler
+
+   Copyright 1994, 1997 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+
+#ifdef _WIN32
+#include <windows.h>
+#endif
+
+static int ser_ocd_open PARAMS ((serial_t scb, const char *name));
+static void ser_ocd_raw PARAMS ((serial_t scb));
+static int ser_ocd_readchar PARAMS ((serial_t scb, int timeout));
+static int ser_ocd_setbaudrate PARAMS ((serial_t scb, int rate));
+static int ser_ocd_write PARAMS ((serial_t scb, const char *str, int len));
+static void ser_ocd_close PARAMS ((serial_t scb));
+static serial_ttystate ser_ocd_get_tty_state PARAMS ((serial_t scb));
+static int ser_ocd_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+
+#ifdef _WIN32
+/* On Windows, this function pointer is initialized to a function in
+   the wiggler DLL.  */
+static int (*dll_do_command) PARAMS ((const char *, char *));
+#endif
+
+static int
+ocd_open (scb, name)
+     serial_t scb;
+     const char *name;
+{
+#ifdef _WIN32
+  /* Find the wiggler DLL which talks to the board.  */
+  if (dll_do_command == NULL)
+    {
+      HINSTANCE handle;
+
+      /* FIXME: Should the user be able to configure this?  */
+      handle = LoadLibrary ("Wigglers.dll");
+      if (handle == NULL)
+	error ("Can't load Wigglers.dll");
+
+      dll_do_command = ((int (*) PARAMS ((const char *, char *)))
+			GetProcAddress (handle, "do_command"));
+      if (dll_do_command == NULL)
+	error ("Can't find do_command function in Wigglers.dll");
+    }
+#else
+  /* No wiggler DLLs on Unix yet, fail.  */
+  error ("Wiggler library not available for this type of host.");
+#endif /* _WIN32 */
+  return 0;
+}
+
+static int
+ocd_noop (scb)
+     serial_t scb;
+{
+  return 0;
+}
+
+static void
+ocd_raw (scb)
+     serial_t scb;
+{
+  /* Always in raw mode */
+}
+
+static void
+ocd_readremote ()
+{
+}
+
+/* We need a buffer to store responses from the Wigglers.dll */
+#define WIGGLER_BUFF_SIZE 512
+unsigned char from_wiggler_buffer[WIGGLER_BUFF_SIZE];
+unsigned char * wiggler_buffer_ptr;	/* curr spot in buffer */
+
+static int
+ocd_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  /* Catch attempts at reading past the end of the buffer */
+  if (wiggler_buffer_ptr >
+              (from_wiggler_buffer + (sizeof (char *) * WIGGLER_BUFF_SIZE)))
+    error ("ocd_readchar asked to read past the end of the buffer!");
+
+  return (int) *wiggler_buffer_ptr++; /* return curr char and increment ptr */
+}
+
+struct ocd_ttystate {
+  int dummy;
+};
+
+/* ocd_{get set}_tty_state() are both dummys to fill out the function
+   vector.  Someday, they may do something real... */
+
+static serial_ttystate
+ocd_get_tty_state (scb)
+     serial_t scb;
+{
+  struct ocd_ttystate *state;
+
+  state = (struct ocd_ttystate *) xmalloc (sizeof *state);
+
+  return (serial_ttystate) state;
+}
+
+static int
+ocd_set_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  return 0;
+}
+
+static int
+ocd_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  return 0;
+}
+
+static void
+ocd_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  /* Nothing to print.  */
+  return;
+}
+
+static int
+ocd_setbaudrate (scb, rate)
+     serial_t scb;
+     int rate;
+{
+  return 0;
+}
+
+static int
+ocd_write (scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  char c;
+
+#ifdef _WIN32 
+  /* send packet to Wigglers.dll and store response so we can give it to
+	remote-wiggler.c when get_packet is run */
+  dll_do_command (str, from_wiggler_buffer);
+  wiggler_buffer_ptr = from_wiggler_buffer;
+#endif
+
+  return 0;
+}
+
+static void
+ocd_close (scb)
+     serial_t scb;
+{
+}
+
+static struct serial_ops ocd_ops =
+{
+  "ocd",
+  0,
+  ocd_open,
+  ocd_close,
+  ocd_readchar,
+  ocd_write,
+  ocd_noop,		/* flush output */
+  ocd_noop,		/* flush input */
+  ocd_noop,		/* send break -- currently used only for nindy */
+  ocd_raw,
+  ocd_get_tty_state,
+  ocd_set_tty_state,
+  ocd_print_tty_state,
+  ocd_noflush_set_tty_state,
+  ocd_setbaudrate,
+  ocd_noop,		/* wait for output to drain */
+};
+
+void
+_initialize_ser_ocd_bdm ()
+{
+  serial_add_interface (&ocd_ops);
+}
diff --git a/gdb/ser-tcp.c b/gdb/ser-tcp.c
new file mode 100644
index 0000000..c551337
--- /dev/null
+++ b/gdb/ser-tcp.c
@@ -0,0 +1,358 @@
+/* Serial interface for raw TCP connections on Un*x like systems
+   Copyright 1992, 1993, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+#include <sys/types.h>
+#include <sys/time.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+#include <sys/socket.h>
+
+#ifndef __CYGWIN32__
+#include <netinet/tcp.h>
+#endif
+
+#include "signals.h"
+#include "gdb_string.h"
+
+struct tcp_ttystate
+{
+  int bogus;
+};
+
+static int tcp_open PARAMS ((serial_t scb, const char *name));
+static void tcp_raw PARAMS ((serial_t scb));
+static int wait_for PARAMS ((serial_t scb, int timeout));
+static int tcp_readchar PARAMS ((serial_t scb, int timeout));
+static int tcp_setbaudrate PARAMS ((serial_t scb, int rate));
+static int tcp_setstopbits PARAMS ((serial_t scb, int num));
+static int tcp_write PARAMS ((serial_t scb, const char *str, int len));
+/* FIXME: static void tcp_restore PARAMS ((serial_t scb)); */
+static void tcp_close PARAMS ((serial_t scb));
+static serial_ttystate tcp_get_tty_state PARAMS ((serial_t scb));
+static int tcp_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static int tcp_return_0 PARAMS ((serial_t));
+static int tcp_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
+					      serial_ttystate));
+static void tcp_print_tty_state PARAMS ((serial_t, serial_ttystate));
+
+void _initialize_ser_tcp PARAMS ((void));
+
+/* Open up a raw tcp socket */
+
+static int
+tcp_open(scb, name)
+     serial_t scb;
+     const char *name;
+{
+  char *port_str;
+  int port;
+  struct hostent *hostent;
+  struct sockaddr_in sockaddr;
+  int tmp;
+  char hostname[100];
+  struct protoent *protoent;
+  int i;
+
+  port_str = strchr (name, ':');
+
+  if (!port_str)
+    error ("tcp_open: No colon in host name!"); /* Shouldn't ever happen */
+
+  tmp = min (port_str - name, (int) sizeof hostname - 1);
+  strncpy (hostname, name, tmp); /* Don't want colon */
+  hostname[tmp] = '\000';	/* Tie off host name */
+  port = atoi (port_str + 1);
+
+  hostent = gethostbyname (hostname);
+
+  if (!hostent)
+    {
+      fprintf_unfiltered (gdb_stderr, "%s: unknown host\n", hostname);
+      errno = ENOENT;
+      return -1;
+    }
+
+  for (i = 1; i <= 15; i++)
+    {
+      scb->fd = socket (PF_INET, SOCK_STREAM, 0);
+      if (scb->fd < 0)
+	return -1;
+
+      /* Allow rapid reuse of this port. */
+      tmp = 1;
+      setsockopt (scb->fd, SOL_SOCKET, SO_REUSEADDR, (char *)&tmp, sizeof(tmp));
+
+      /* Enable TCP keep alive process. */
+      tmp = 1;
+      setsockopt (scb->fd, SOL_SOCKET, SO_KEEPALIVE, (char *)&tmp, sizeof(tmp));
+
+      sockaddr.sin_family = PF_INET;
+      sockaddr.sin_port = htons(port);
+      memcpy (&sockaddr.sin_addr.s_addr, hostent->h_addr,
+	      sizeof (struct in_addr));
+
+      if (!connect (scb->fd, (struct sockaddr *) &sockaddr, sizeof(sockaddr)))
+	break;
+
+      close (scb->fd);
+      scb->fd = -1;
+
+/* We retry for ECONNREFUSED because that is often a temporary condition, which
+   happens when the server is being restarted.  */
+
+      if (errno != ECONNREFUSED)
+	return -1;
+
+      sleep (1);
+    }
+
+  protoent = getprotobyname ("tcp");
+  if (!protoent)
+    return -1;
+
+  tmp = 1;
+  if (setsockopt (scb->fd, protoent->p_proto, TCP_NODELAY,
+		  (char *)&tmp, sizeof(tmp)))
+    return -1;
+
+  signal(SIGPIPE, SIG_IGN);	/* If we don't do this, then GDB simply exits
+				   when the remote side dies.  */
+
+  return 0;
+}
+
+static serial_ttystate
+tcp_get_tty_state(scb)
+     serial_t scb;
+{
+  struct tcp_ttystate *state;
+
+  state = (struct tcp_ttystate *)xmalloc(sizeof *state);
+
+  return (serial_ttystate)state;
+}
+
+static int
+tcp_set_tty_state(scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  struct tcp_ttystate *state;
+
+  state = (struct tcp_ttystate *)ttystate;
+
+  return 0;
+}
+
+static int
+tcp_return_0 (scb)
+     serial_t scb;
+{
+  return 0;
+}
+
+static void
+tcp_raw(scb)
+     serial_t scb;
+{
+  return;			/* Always in raw mode */
+}
+
+/* Wait for input on scb, with timeout seconds.  Returns 0 on success,
+   otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
+
+   For termio{s}, we actually just setup VTIME if necessary, and let the
+   timeout occur in the read() in tcp_read().
+ */
+
+static int
+wait_for (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  int numfds;
+  struct timeval tv;
+  fd_set readfds, exceptfds;
+
+  FD_ZERO (&readfds);
+  FD_ZERO (&exceptfds);
+
+  tv.tv_sec = timeout;
+  tv.tv_usec = 0;
+
+  FD_SET(scb->fd, &readfds);
+  FD_SET(scb->fd, &exceptfds);
+
+  while (1)
+    {
+      if (timeout >= 0)
+	numfds = select(scb->fd+1, &readfds, 0, &exceptfds, &tv);
+      else
+	numfds = select(scb->fd+1, &readfds, 0, &exceptfds, 0);
+
+      if (numfds <= 0)
+        {
+	  if (numfds == 0)
+	    return SERIAL_TIMEOUT;
+	  else if (errno == EINTR)
+	    continue;
+	  else
+	    return SERIAL_ERROR;	/* Got an error from select or poll */
+        }
+
+      return 0;
+    }
+}
+
+/* Read a character with user-specified timeout.  TIMEOUT is number of seconds
+   to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
+   char if successful.  Returns -2 if timeout expired, EOF if line dropped
+   dead, or -3 for any other error (see errno in that case). */
+
+static int
+tcp_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  int status;
+
+  if (scb->bufcnt-- > 0)
+    return *scb->bufp++;
+
+  status = wait_for(scb, timeout);
+
+  if (status < 0)
+    return status;
+
+  while (1)
+    {
+      scb->bufcnt = read(scb->fd, scb->buf, BUFSIZ);
+      if (scb->bufcnt != -1 || errno != EINTR)
+	break;
+    }
+
+  if (scb->bufcnt <= 0)
+    {
+      if (scb->bufcnt == 0)
+        return SERIAL_TIMEOUT;	/* 0 chars means timeout [may need to
+				     distinguish between EOF & timeouts
+				     someday] */
+      else
+        return SERIAL_ERROR;	/* Got an error from read */
+    }
+
+  scb->bufcnt--;
+  scb->bufp = scb->buf;
+  return *scb->bufp++;
+}
+
+static int
+tcp_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  return 0;
+}
+
+static void
+tcp_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  /* Nothing to print.  */
+  return;
+}
+
+static int
+tcp_setbaudrate(scb, rate)
+     serial_t scb;
+     int rate;
+{
+  return 0;			/* Never fails! */
+}
+
+static int
+tcp_setstopbits(scb, num)
+     serial_t scb;
+     int num;
+{
+  return 0;			/* Never fails! */
+}
+
+static int
+tcp_write(scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  int cc;
+
+  while (len > 0)
+    {
+      cc = write(scb->fd, str, len);
+
+      if (cc < 0)
+	return 1;
+      len -= cc;
+      str += cc;
+    }
+  return 0;
+}
+
+static void
+tcp_close(scb)
+     serial_t scb;
+{
+  if (scb->fd < 0)
+    return;
+
+  close(scb->fd);
+  scb->fd = -1;
+}
+
+static struct serial_ops tcp_ops =
+{
+  "tcp",
+  0,
+  tcp_open,
+  tcp_close,
+  tcp_readchar,
+  tcp_write,
+  tcp_return_0, /* flush output */
+  tcp_return_0, /* flush input */
+  tcp_return_0, /* send break */
+  tcp_raw,
+  tcp_get_tty_state,
+  tcp_set_tty_state,
+  tcp_print_tty_state,
+  tcp_noflush_set_tty_state,
+  tcp_setbaudrate,
+  tcp_setstopbits,
+  tcp_return_0,	/* wait for output to drain */
+};
+
+void
+_initialize_ser_tcp ()
+{
+  serial_add_interface (&tcp_ops);
+}
diff --git a/gdb/ser-unix.c b/gdb/ser-unix.c
new file mode 100644
index 0000000..f279c94
--- /dev/null
+++ b/gdb/ser-unix.c
@@ -0,0 +1,808 @@
+/* Serial interface for local (hardwired) serial ports on Un*x like systems
+   Copyright 1992, 1993, 1994, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+#include <fcntl.h>
+#include <sys/types.h>
+#include "terminal.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_TERMIOS
+
+struct hardwire_ttystate
+{
+  struct termios termios;
+};
+#endif /* termios */
+
+#ifdef HAVE_TERMIO
+
+/* It is believed that all systems which have added job control to SVR3
+   (e.g. sco) have also added termios.  Even if not, trying to figure out
+   all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
+   bewildering.  So we don't attempt it.  */
+
+struct hardwire_ttystate
+{
+  struct termio termio;
+};
+#endif /* termio */
+
+#ifdef HAVE_SGTTY
+/* Needed for the code which uses select().  We would include <sys/select.h>
+   too if it existed on all systems.  */
+#include <sys/time.h>
+
+struct hardwire_ttystate
+{
+  struct sgttyb sgttyb;
+  struct tchars tc;
+  struct ltchars ltc;
+  /* Line discipline flags.  */
+  int lmode;
+};
+#endif /* sgtty */
+
+static int hardwire_open PARAMS ((serial_t scb, const char *name));
+static void hardwire_raw PARAMS ((serial_t scb));
+static int wait_for PARAMS ((serial_t scb, int timeout));
+static int hardwire_readchar PARAMS ((serial_t scb, int timeout));
+static int rate_to_code PARAMS ((int rate));
+static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate));
+static int hardwire_write PARAMS ((serial_t scb, const char *str, int len));
+static void hardwire_close PARAMS ((serial_t scb));
+static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
+static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
+static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb));
+static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
+static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
+						   serial_ttystate));
+static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate));
+static int hardwire_drain_output PARAMS ((serial_t));
+static int hardwire_flush_output PARAMS ((serial_t));
+static int hardwire_flush_input PARAMS ((serial_t));
+static int hardwire_send_break PARAMS ((serial_t));
+static int hardwire_setstopbits PARAMS ((serial_t, int));
+
+void _initialize_ser_hardwire PARAMS ((void));
+
+#ifdef __CYGWIN32__
+extern void (*ui_loop_hook) PARAMS ((int));
+#endif
+
+/* Open up a real live device for serial I/O */
+
+static int
+hardwire_open(scb, name)
+     serial_t scb;
+     const char *name;
+{
+  scb->fd = open (name, O_RDWR);
+  if (scb->fd < 0)
+    return -1;
+
+  return 0;
+}
+
+static int
+get_tty_state (scb, state)
+     serial_t scb;
+     struct hardwire_ttystate *state;
+{
+#ifdef HAVE_TERMIOS
+  if (tcgetattr(scb->fd, &state->termios) < 0)
+    return -1;
+
+  return 0;
+#endif
+
+#ifdef HAVE_TERMIO
+  if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
+    return -1;
+  return 0;
+#endif
+
+#ifdef HAVE_SGTTY
+  if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
+    return -1;
+
+  return 0;
+#endif
+}
+
+static int
+set_tty_state(scb, state)
+     serial_t scb;
+     struct hardwire_ttystate *state;
+{
+#ifdef HAVE_TERMIOS
+  if (tcsetattr(scb->fd, TCSANOW, &state->termios) < 0)
+    return -1;
+
+  return 0;
+#endif
+
+#ifdef HAVE_TERMIO
+  if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
+    return -1;
+  return 0;
+#endif
+
+#ifdef HAVE_SGTTY
+  if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
+    return -1;
+  if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
+    return -1;
+
+  return 0;
+#endif
+}
+
+static serial_ttystate
+hardwire_get_tty_state(scb)
+     serial_t scb;
+{
+  struct hardwire_ttystate *state;
+
+  state = (struct hardwire_ttystate *)xmalloc(sizeof *state);
+
+  if (get_tty_state(scb, state))
+    return NULL;
+
+  return (serial_ttystate)state;
+}
+
+static int
+hardwire_set_tty_state(scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  struct hardwire_ttystate *state;
+
+  state = (struct hardwire_ttystate *)ttystate;
+
+  return set_tty_state(scb, state);
+}
+
+static int
+hardwire_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
+     serial_t scb;
+     serial_ttystate new_ttystate;
+     serial_ttystate old_ttystate;
+{
+  struct hardwire_ttystate new_state;
+#ifdef HAVE_SGTTY
+  struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
+#endif
+
+  new_state = *(struct hardwire_ttystate *)new_ttystate;
+
+  /* Don't change in or out of raw mode; we don't want to flush input.
+     termio and termios have no such restriction; for them flushing input
+     is separate from setting the attributes.  */
+
+#ifdef HAVE_SGTTY
+  if (state->sgttyb.sg_flags & RAW)
+    new_state.sgttyb.sg_flags |= RAW;
+  else
+    new_state.sgttyb.sg_flags &= ~RAW;
+
+  /* I'm not sure whether this is necessary; the manpage just mentions
+     RAW not CBREAK.  */
+  if (state->sgttyb.sg_flags & CBREAK)
+    new_state.sgttyb.sg_flags |= CBREAK;
+  else
+    new_state.sgttyb.sg_flags &= ~CBREAK;
+#endif
+
+  return set_tty_state (scb, &new_state);
+}
+
+static void
+hardwire_print_tty_state (scb, ttystate)
+     serial_t scb;
+     serial_ttystate ttystate;
+{
+  struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
+  int i;
+
+#ifdef HAVE_TERMIOS
+  printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
+		   state->termios.c_iflag, state->termios.c_oflag);
+  printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x\n",
+		   state->termios.c_cflag, state->termios.c_lflag);
+#if 0
+  /* This not in POSIX, and is not really documented by those systems
+     which have it (at least not Sun).  */
+  printf_filtered ("c_line = 0x%x.\n", state->termios.c_line);
+#endif
+  printf_filtered ("c_cc: ");
+  for (i = 0; i < NCCS; i += 1)
+    printf_filtered ("0x%x ", state->termios.c_cc[i]);
+  printf_filtered ("\n");
+#endif
+
+#ifdef HAVE_TERMIO
+  printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
+		   state->termio.c_iflag, state->termio.c_oflag);
+  printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
+		   state->termio.c_cflag, state->termio.c_lflag,
+		   state->termio.c_line);
+  printf_filtered ("c_cc: ");
+  for (i = 0; i < NCC; i += 1)
+    printf_filtered ("0x%x ", state->termio.c_cc[i]);
+  printf_filtered ("\n");
+#endif
+
+#ifdef HAVE_SGTTY
+  printf_filtered ("sgttyb.sg_flags = 0x%x.\n", state->sgttyb.sg_flags);
+
+  printf_filtered ("tchars: ");
+  for (i = 0; i < (int)sizeof (struct tchars); i++)
+    printf_filtered ("0x%x ", ((unsigned char *)&state->tc)[i]);
+  printf_filtered ("\n");
+
+  printf_filtered ("ltchars: ");
+  for (i = 0; i < (int)sizeof (struct ltchars); i++)
+    printf_filtered ("0x%x ", ((unsigned char *)&state->ltc)[i]);
+  printf_filtered ("\n");
+
+  printf_filtered ("lmode:  0x%x\n", state->lmode);
+#endif
+}
+
+/* Wait for the output to drain away, as opposed to flushing (discarding) it */
+
+static int
+hardwire_drain_output (scb)
+     serial_t scb;
+{
+#ifdef HAVE_TERMIOS
+  return tcdrain (scb->fd);
+#endif
+
+#ifdef HAVE_TERMIO
+  return ioctl (scb->fd, TCSBRK, 1);
+#endif
+
+#ifdef HAVE_SGTTY
+  /* Get the current state and then restore it using TIOCSETP,
+     which should cause the output to drain and pending input
+     to be discarded. */
+  {
+    struct hardwire_ttystate state;
+    if (get_tty_state (scb, &state))
+      {
+	return (-1);
+      }
+    else
+      {
+	return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
+      }
+  }
+#endif  
+}
+
+static int
+hardwire_flush_output (scb)
+     serial_t scb;
+{
+#ifdef HAVE_TERMIOS
+  return tcflush (scb->fd, TCOFLUSH);
+#endif
+
+#ifdef HAVE_TERMIO
+  return ioctl (scb->fd, TCFLSH, 1);
+#endif
+
+#ifdef HAVE_SGTTY
+  /* This flushes both input and output, but we can't do better.  */
+  return ioctl (scb->fd, TIOCFLUSH, 0);
+#endif  
+}
+
+static int
+hardwire_flush_input (scb)
+     serial_t scb;
+{
+  scb->bufcnt = 0;
+  scb->bufp = scb->buf;
+
+#ifdef HAVE_TERMIOS
+  return tcflush (scb->fd, TCIFLUSH);
+#endif
+
+#ifdef HAVE_TERMIO
+  return ioctl (scb->fd, TCFLSH, 0);
+#endif
+
+#ifdef HAVE_SGTTY
+  /* This flushes both input and output, but we can't do better.  */
+  return ioctl (scb->fd, TIOCFLUSH, 0);
+#endif  
+}
+
+static int
+hardwire_send_break (scb)
+     serial_t scb;
+{
+#ifdef HAVE_TERMIOS
+  return tcsendbreak (scb->fd, 0);
+#endif
+
+#ifdef HAVE_TERMIO
+  return ioctl (scb->fd, TCSBRK, 0);
+#endif
+
+#ifdef HAVE_SGTTY
+  {
+    int status;
+    struct timeval timeout;
+
+    status = ioctl (scb->fd, TIOCSBRK, 0);
+
+    /* Can't use usleep; it doesn't exist in BSD 4.2.  */
+    /* Note that if this select() is interrupted by a signal it will not wait
+       the full length of time.  I think that is OK.  */
+    timeout.tv_sec = 0;
+    timeout.tv_usec = 250000;
+    select (0, 0, 0, 0, &timeout);
+    status = ioctl (scb->fd, TIOCCBRK, 0);
+    return status;
+  }
+#endif  
+}
+
+static void
+hardwire_raw(scb)
+     serial_t scb;
+{
+  struct hardwire_ttystate state;
+
+  if (get_tty_state(scb, &state))
+    fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
+
+#ifdef HAVE_TERMIOS
+  state.termios.c_iflag = 0;
+  state.termios.c_oflag = 0;
+  state.termios.c_lflag = 0;
+  state.termios.c_cflag &= ~(CSIZE|PARENB);
+  state.termios.c_cflag |= CLOCAL | CS8;
+  state.termios.c_cc[VMIN] = 0;
+  state.termios.c_cc[VTIME] = 0;
+#endif
+
+#ifdef HAVE_TERMIO
+  state.termio.c_iflag = 0;
+  state.termio.c_oflag = 0;
+  state.termio.c_lflag = 0;
+  state.termio.c_cflag &= ~(CSIZE|PARENB);
+  state.termio.c_cflag |= CLOCAL | CS8;
+  state.termio.c_cc[VMIN] = 0;
+  state.termio.c_cc[VTIME] = 0;
+#endif
+
+#ifdef HAVE_SGTTY
+  state.sgttyb.sg_flags |= RAW | ANYP;
+  state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
+#endif
+
+  scb->current_timeout = 0;
+
+  if (set_tty_state (scb, &state))
+    fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
+}
+
+/* Wait for input on scb, with timeout seconds.  Returns 0 on success,
+   otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
+
+   For termio{s}, we actually just setup VTIME if necessary, and let the
+   timeout occur in the read() in hardwire_read().
+ */
+
+static int
+wait_for(scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+#ifndef __CYGWIN32__
+  scb->timeout_remaining = 0;
+#endif
+
+#ifdef HAVE_SGTTY
+  {
+    struct timeval tv;
+    fd_set readfds;
+
+    FD_ZERO (&readfds);
+
+    tv.tv_sec = timeout;
+    tv.tv_usec = 0;
+
+    FD_SET(scb->fd, &readfds);
+
+    while (1)
+      {
+	int numfds;
+
+	if (timeout >= 0)
+	  numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
+	else
+	  numfds = select(scb->fd+1, &readfds, 0, 0, 0);
+
+	if (numfds <= 0)
+	  if (numfds == 0)
+	    return SERIAL_TIMEOUT;
+	  else if (errno == EINTR)
+	    continue;
+	  else
+	    return SERIAL_ERROR;	/* Got an error from select or poll */
+
+	return 0;
+      }
+  }
+#endif	/* HAVE_SGTTY */
+
+#if defined HAVE_TERMIO || defined HAVE_TERMIOS
+  if (timeout == scb->current_timeout)
+    return 0;
+
+  scb->current_timeout = timeout;
+
+  {
+    struct hardwire_ttystate state;
+
+    if (get_tty_state(scb, &state))
+      fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
+
+#ifdef HAVE_TERMIOS
+    if (timeout < 0)
+      {
+	/* No timeout.  */
+	state.termios.c_cc[VTIME] = 0;
+	state.termios.c_cc[VMIN] = 1;
+      }
+    else
+      {
+	state.termios.c_cc[VMIN] = 0;
+	state.termios.c_cc[VTIME] = timeout * 10;
+	if (state.termios.c_cc[VTIME] != timeout * 10)
+	  {
+
+	    /* If c_cc is an 8-bit signed character, we can't go 
+	       bigger than this.  If it is always unsigned, we could use
+	       25.  */
+
+	    scb->current_timeout = 12;
+	    state.termios.c_cc[VTIME] = scb->current_timeout * 10;
+	    scb->timeout_remaining = timeout - scb->current_timeout;
+	  }
+      }
+#endif
+
+#ifdef HAVE_TERMIO
+    if (timeout < 0)
+      {
+	/* No timeout.  */
+	state.termio.c_cc[VTIME] = 0;
+	state.termio.c_cc[VMIN] = 1;
+      }
+    else
+      {
+	state.termio.c_cc[VMIN] = 0;
+	state.termio.c_cc[VTIME] = timeout * 10;
+	if (state.termio.c_cc[VTIME] != timeout * 10)
+	  {
+	    /* If c_cc is an 8-bit signed character, we can't go 
+	       bigger than this.  If it is always unsigned, we could use
+	       25.  */
+
+	    scb->current_timeout = 12;
+	    state.termio.c_cc[VTIME] = scb->current_timeout * 10;
+	    scb->timeout_remaining = timeout - scb->current_timeout;
+	  }
+      }
+#endif
+
+    if (set_tty_state (scb, &state))
+      fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
+
+    return 0;
+  }
+#endif	/* HAVE_TERMIO || HAVE_TERMIOS */
+}
+
+/* Read a character with user-specified timeout.  TIMEOUT is number of seconds
+   to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
+   char if successful.  Returns SERIAL_TIMEOUT if timeout expired, EOF if line
+   dropped dead, or SERIAL_ERROR for any other error (see errno in that case).  */
+static int
+hardwire_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  int status;
+#ifdef __CYGWIN32__
+  int t;
+#endif
+
+  if (scb->bufcnt-- > 0)
+    return *scb->bufp++;
+
+#ifdef __CYGWIN32__
+  if (timeout > 0)
+    timeout++;
+#endif
+
+  while (1)
+    {
+#ifdef __CYGWIN32__
+      t = timeout == 0 ? 0 : 1;
+      scb->timeout_remaining = timeout < 0 ? timeout : timeout - t;
+      status = wait_for (scb, t);
+
+      /* -2 means disable timer */
+      if (ui_loop_hook)
+        ui_loop_hook (-2);
+#else
+      status = wait_for (scb, timeout);
+#endif
+      if (status < 0)
+	return status;
+
+      scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ);
+
+      if (scb->bufcnt <= 0)
+	{
+	  if (scb->bufcnt == 0)
+	    {
+	      /* Zero characters means timeout (it could also be EOF, but
+		 we don't (yet at least) distinguish).  */
+	      if (scb->timeout_remaining > 0)
+		{
+		  timeout = scb->timeout_remaining;
+		  continue;
+		}
+#ifdef __CYGWIN32__
+          else if (scb->timeout_remaining < 0)
+            continue;
+#endif
+	      else
+		return SERIAL_TIMEOUT;
+	    }
+	  else if (errno == EINTR)
+	    continue;
+	  else
+	    return SERIAL_ERROR;	/* Got an error from read */
+	}
+
+      scb->bufcnt--;
+      scb->bufp = scb->buf;
+      return *scb->bufp++;
+    }
+}
+
+#ifndef B19200
+#define B19200 EXTA
+#endif
+
+#ifndef B38400
+#define B38400 EXTB
+#endif
+
+/* Translate baud rates from integers to damn B_codes.  Unix should
+   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
+
+static struct
+{
+  int rate;
+  int code;
+}
+baudtab[] =
+{
+  {50, B50},
+  {75, B75},
+  {110, B110},
+  {134, B134},
+  {150, B150},
+  {200, B200},
+  {300, B300},
+  {600, B600},
+  {1200, B1200},
+  {1800, B1800},
+  {2400, B2400},
+  {4800, B4800},
+  {9600, B9600},
+  {19200, B19200},
+  {38400, B38400},
+#ifdef B57600
+  {57600, B57600},
+#endif
+#ifdef B115200
+  {115200, B115200},
+#endif
+#ifdef B230400
+  {230400, B230400},
+#endif
+#ifdef B460800
+  {460800, B460800},
+#endif
+  {-1, -1},
+};
+
+static int 
+rate_to_code(rate)
+     int rate;
+{
+  int i;
+
+  for (i = 0; baudtab[i].rate != -1; i++)
+    if (rate == baudtab[i].rate)  
+      return baudtab[i].code;
+
+  return -1;
+}
+
+static int
+hardwire_setbaudrate(scb, rate)
+     serial_t scb;
+     int rate;
+{
+  struct hardwire_ttystate state;
+
+  if (get_tty_state(scb, &state))
+    return -1;
+
+#ifdef HAVE_TERMIOS
+  cfsetospeed (&state.termios, rate_to_code (rate));
+  cfsetispeed (&state.termios, rate_to_code (rate));
+#endif
+
+#ifdef HAVE_TERMIO
+#ifndef CIBAUD
+#define CIBAUD CBAUD
+#endif
+
+  state.termio.c_cflag &= ~(CBAUD | CIBAUD);
+  state.termio.c_cflag |= rate_to_code (rate);
+#endif
+
+#ifdef HAVE_SGTTY
+  state.sgttyb.sg_ispeed = rate_to_code (rate);
+  state.sgttyb.sg_ospeed = rate_to_code (rate);
+#endif
+
+  return set_tty_state (scb, &state);
+}
+
+static int
+hardwire_setstopbits(scb, num)
+     serial_t scb;
+     int num;
+{
+  struct hardwire_ttystate state;
+  int newbit;
+
+  if (get_tty_state(scb, &state))
+    return -1;
+
+  switch (num)
+    {
+    case SERIAL_1_STOPBITS:
+      newbit = 0;
+      break;
+    case SERIAL_1_AND_A_HALF_STOPBITS:
+    case SERIAL_2_STOPBITS:
+      newbit = 1;
+      break;
+    default:
+      return 1;
+    }
+
+#ifdef HAVE_TERMIOS
+  if (!newbit)
+    state.termios.c_cflag &= ~CSTOPB;
+  else
+    state.termios.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_TERMIO
+  if (!newbit)
+    state.termio.c_cflag &= ~CSTOPB;
+  else
+    state.termio.c_cflag |= CSTOPB; /* two bits */
+#endif
+
+#ifdef HAVE_SGTTY
+  return 0;			/* sgtty doesn't support this */
+#endif
+
+  return set_tty_state (scb, &state);
+}
+
+static int
+hardwire_write(scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  int cc;
+
+  while (len > 0)
+    {
+      cc = write(scb->fd, str, len);
+
+      if (cc < 0)
+	return 1;
+      len -= cc;
+      str += cc;
+    }
+  return 0;
+}
+
+static void
+hardwire_close(scb)
+     serial_t scb;
+{
+  if (scb->fd < 0)
+    return;
+
+  close(scb->fd);
+  scb->fd = -1;
+}
+
+static struct serial_ops hardwire_ops =
+{
+  "hardwire",
+  0,
+  hardwire_open,
+  hardwire_close,
+  hardwire_readchar,
+  hardwire_write,
+  hardwire_flush_output,
+  hardwire_flush_input,
+  hardwire_send_break,
+  hardwire_raw,
+  hardwire_get_tty_state,
+  hardwire_set_tty_state,
+  hardwire_print_tty_state,
+  hardwire_noflush_set_tty_state,
+  hardwire_setbaudrate,
+  hardwire_setstopbits,
+  hardwire_drain_output,	/* wait for output to drain */
+};
+
+void
+_initialize_ser_hardwire ()
+{
+  serial_add_interface (&hardwire_ops);
+}
diff --git a/gdb/serial.c b/gdb/serial.c
new file mode 100644
index 0000000..ce420ee
--- /dev/null
+++ b/gdb/serial.c
@@ -0,0 +1,526 @@
+/* Generic serial interface routines
+   Copyright 1992, 1993, 1996, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <ctype.h>
+#include "serial.h"
+#include "gdb_string.h"
+#include "gdbcmd.h"
+
+/* Linked list of serial I/O handlers */
+
+static struct serial_ops *serial_ops_list = NULL;
+
+/* This is the last serial stream opened.  Used by connect command. */
+
+static serial_t last_serial_opened = NULL;
+
+/* Pointer to list of scb's. */
+
+static serial_t scb_base;
+
+/* Non-NULL gives filename which contains a recording of the remote session,
+   suitable for playback by gdbserver. */
+
+static char *serial_logfile = NULL;
+static GDB_FILE *serial_logfp = NULL;
+
+static struct serial_ops *serial_interface_lookup PARAMS ((char *));
+static void serial_logchar PARAMS ((int, int, int));
+static char logbase_hex[] = "hex";
+static char logbase_octal[] = "octal";
+static char logbase_ascii[] = "ascii";
+static char *logbase_enums[] = {logbase_hex, logbase_octal, logbase_ascii, NULL};
+static char *serial_logbase = logbase_ascii;
+
+
+static int serial_current_type = 0;
+
+/* Log char CH of type CHTYPE, with TIMEOUT */
+
+/* Define bogus char to represent a BREAK.  Should be careful to choose a value
+   that can't be confused with a normal char, or an error code.  */
+#define SERIAL_BREAK 1235
+
+static void
+serial_logchar (ch_type, ch, timeout)
+     int ch_type;
+     int ch;
+     int timeout;
+{
+  if (ch_type != serial_current_type)
+    {
+      fprintf_unfiltered (serial_logfp, "\n%c ", ch_type);
+      serial_current_type = ch_type;
+    }
+
+  if (serial_logbase != logbase_ascii)
+    fputc_unfiltered (' ', serial_logfp);
+
+  switch (ch)
+    {
+    case SERIAL_TIMEOUT:
+      fprintf_unfiltered (serial_logfp, "<Timeout: %d seconds>", timeout);
+      return;
+    case SERIAL_ERROR:
+      fprintf_unfiltered (serial_logfp, "<Error: %s>", safe_strerror (errno));
+      return;
+    case SERIAL_EOF:
+      fputs_unfiltered ("<Eof>", serial_logfp);
+      return;
+    case SERIAL_BREAK:
+      fputs_unfiltered ("<Break>", serial_logfp);
+      return;
+    default:
+      if (serial_logbase == logbase_hex)
+	fprintf_unfiltered (serial_logfp, "%02x", ch & 0xff);
+      else if (serial_logbase == logbase_octal)
+	fprintf_unfiltered (serial_logfp, "%03o", ch & 0xff);
+      else
+	switch (ch)
+	  {
+	  case '\\':	fputs_unfiltered ("\\\\", serial_logfp); break;	
+	  case '\b':	fputs_unfiltered ("\\b", serial_logfp); break;	
+	  case '\f':	fputs_unfiltered ("\\f", serial_logfp); break;	
+	  case '\n':	fputs_unfiltered ("\\n", serial_logfp); break;	
+	  case '\r':	fputs_unfiltered ("\\r", serial_logfp); break;	
+	  case '\t':	fputs_unfiltered ("\\t", serial_logfp); break;	
+	  case '\v':	fputs_unfiltered ("\\v", serial_logfp); break;	
+	  default:	fprintf_unfiltered (serial_logfp, isprint (ch) ? "%c" : "\\x%02x", ch & 0xFF); break;
+	  }
+    }
+}
+
+void
+serial_log_command (cmd)
+     const char *cmd;
+{
+  if (!serial_logfp)
+    return;
+
+  serial_current_type = 'c';
+
+  fputs_unfiltered ("\nc ", serial_logfp);
+  fputs_unfiltered (cmd, serial_logfp);
+
+  /* Make sure that the log file is as up-to-date as possible,
+     in case we are getting ready to dump core or something. */
+  gdb_flush (serial_logfp);
+}
+
+int
+serial_write (scb, str, len)
+     serial_t scb;
+     const char *str;
+     int len;
+{
+  if (serial_logfp != NULL)
+    {
+      int count;
+
+      for (count = 0; count < len; count++)
+	serial_logchar ('w', str[count] & 0xff, 0);
+
+      /* Make sure that the log file is as up-to-date as possible,
+	 in case we are getting ready to dump core or something. */
+      gdb_flush (serial_logfp);
+    }
+
+  return (scb -> ops -> write (scb, str, len));
+}
+
+int
+serial_readchar (scb, timeout)
+     serial_t scb;
+     int timeout;
+{
+  int ch;
+
+  ch = scb -> ops -> readchar (scb, timeout);
+  if (serial_logfp != NULL)
+    {
+      serial_logchar ('r', ch, timeout);
+
+      /* Make sure that the log file is as up-to-date as possible,
+	 in case we are getting ready to dump core or something. */
+      gdb_flush (serial_logfp);
+    }
+
+  return (ch);
+}
+
+int
+serial_send_break (scb)
+     serial_t scb;
+{
+  if (serial_logfp != NULL)
+    serial_logchar ('w', SERIAL_BREAK, 0);
+
+  return (scb -> ops -> send_break (scb));
+}
+
+static struct serial_ops *
+serial_interface_lookup (name)
+     char *name;
+{
+  struct serial_ops *ops;
+
+  for (ops = serial_ops_list; ops; ops = ops->next)
+    if (strcmp (name, ops->name) == 0)
+      return ops;
+
+  return NULL;
+}
+
+void
+serial_add_interface(optable)
+     struct serial_ops *optable;
+{
+  optable->next = serial_ops_list;
+  serial_ops_list = optable;
+}
+
+/* Open up a device or a network socket, depending upon the syntax of NAME. */
+
+serial_t
+serial_open (name)
+     const char *name;
+{
+  serial_t scb;
+  struct serial_ops *ops;
+
+  for (scb = scb_base; scb; scb = scb->next)
+    if (scb->name && strcmp (scb->name, name) == 0)
+      {
+	scb->refcnt++;
+	return scb;
+      }
+
+  if (strcmp (name, "ocd") == 0)
+    ops = serial_interface_lookup ("ocd");
+  else if (strcmp (name, "pc") == 0)
+    ops = serial_interface_lookup ("pc");
+  else if (strchr (name, ':'))
+    ops = serial_interface_lookup ("tcp");
+  else if (strncmp (name, "lpt", 3) == 0)
+    ops = serial_interface_lookup ("parallel");
+  else
+    ops = serial_interface_lookup ("hardwire");
+
+  if (!ops)
+    return NULL;
+
+  scb = (serial_t)xmalloc (sizeof (struct _serial_t));
+
+  scb->ops = ops;
+
+  scb->bufcnt = 0;
+  scb->bufp = scb->buf;
+
+  if (scb->ops->open(scb, name))
+    {
+      free (scb);
+      return NULL;
+    }
+
+  scb->name = strsave (name);
+  scb->next = scb_base;
+  scb->refcnt = 1;
+  scb_base = scb;
+
+  last_serial_opened = scb;
+
+  if (serial_logfile != NULL)
+    {
+      serial_logfp = gdb_fopen (serial_logfile, "w");
+      if (serial_logfp == NULL)
+	perror_with_name (serial_logfile);
+    }
+
+  return scb;
+}
+
+serial_t
+serial_fdopen (fd)
+     const int fd;
+{
+  serial_t scb;
+  struct serial_ops *ops;
+
+  for (scb = scb_base; scb; scb = scb->next)
+    if (scb->fd == fd)
+      {
+	scb->refcnt++;
+	return scb;
+      }
+
+  ops = serial_interface_lookup ("hardwire");
+
+  if (!ops)
+    return NULL;
+
+  scb = (serial_t)xmalloc (sizeof (struct _serial_t));
+
+  scb->ops = ops;
+
+  scb->bufcnt = 0;
+  scb->bufp = scb->buf;
+
+  scb->fd = fd;
+
+  scb->name = NULL;
+  scb->next = scb_base;
+  scb->refcnt = 1;
+  scb_base = scb;
+
+  last_serial_opened = scb;
+
+  return scb;
+}
+
+void
+serial_close (scb, really_close)
+     serial_t scb;
+     int really_close;
+{
+  serial_t tmp_scb;
+
+  last_serial_opened = NULL;
+
+  if (serial_logfp)
+    {
+      fputs_unfiltered ("\nEnd of log\n", serial_logfp);
+      serial_current_type = 0;
+
+      /* XXX - What if serial_logfp == gdb_stdout or gdb_stderr? */
+      gdb_fclose (&serial_logfp); 
+      serial_logfp = NULL;
+    }
+
+/* This is bogus.  It's not our fault if you pass us a bad scb...!  Rob, you
+   should fix your code instead.  */
+
+  if (!scb)
+    return;
+
+  scb->refcnt--;
+  if (scb->refcnt > 0)
+    return;
+
+  if (really_close)
+    scb->ops->close (scb);
+
+  if (scb->name)
+    free (scb->name);
+
+  if (scb_base == scb)
+    scb_base = scb_base->next;
+  else
+    for (tmp_scb = scb_base; tmp_scb; tmp_scb = tmp_scb->next)
+      {
+	if (tmp_scb->next != scb)
+	  continue;
+
+	tmp_scb->next = tmp_scb->next->next;
+	break;
+      }
+
+  free(scb);
+}
+
+#if 0
+/*
+The connect command is #if 0 because I hadn't thought of an elegant
+way to wait for I/O on two serial_t's simultaneously.  Two solutions
+came to mind:
+
+	1) Fork, and have have one fork handle the to user direction,
+	   and have the other hand the to target direction.  This
+	   obviously won't cut it for MSDOS.
+
+	2) Use something like select.  This assumes that stdin and
+	   the target side can both be waited on via the same
+	   mechanism.  This may not be true for DOS, if GDB is
+	   talking to the target via a TCP socket.
+-grossman, 8 Jun 93
+*/
+
+/* Connect the user directly to the remote system.  This command acts just like
+   the 'cu' or 'tip' command.  Use <CR>~. or <CR>~^D to break out.  */
+
+static serial_t tty_desc;		/* Controlling terminal */
+
+static void
+cleanup_tty(ttystate)
+     serial_ttystate ttystate;
+{
+  printf_unfiltered ("\r\n[Exiting connect mode]\r\n");
+  SERIAL_SET_TTY_STATE (tty_desc, ttystate);
+  free (ttystate);
+  SERIAL_CLOSE (tty_desc);
+}
+
+static void
+connect_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  int c;
+  char cur_esc = 0;
+  serial_ttystate ttystate;
+  serial_t port_desc;		/* TTY port */
+
+  dont_repeat();
+
+  if (args)
+    fprintf_unfiltered(gdb_stderr, "This command takes no args.  They have been ignored.\n");
+	
+  printf_unfiltered("[Entering connect mode.  Use ~. or ~^D to escape]\n");
+
+  tty_desc = SERIAL_FDOPEN (0);
+  port_desc = last_serial_opened;
+
+  ttystate = SERIAL_GET_TTY_STATE (tty_desc);
+
+  SERIAL_RAW (tty_desc);
+  SERIAL_RAW (port_desc);
+
+  make_cleanup (cleanup_tty, ttystate);
+
+  while (1)
+    {
+      int mask;
+
+      mask = SERIAL_WAIT_2 (tty_desc, port_desc, -1);
+
+      if (mask & 2)
+	{			/* tty input */
+	  char cx;
+
+	  while (1)
+	    {
+	      c = SERIAL_READCHAR(tty_desc, 0);
+
+	      if (c == SERIAL_TIMEOUT)
+		  break;
+
+	      if (c < 0)
+		perror_with_name("connect");
+
+	      cx = c;
+	      SERIAL_WRITE(port_desc, &cx, 1);
+
+	      switch (cur_esc)
+		{
+		case 0:
+		  if (c == '\r')
+		    cur_esc = c;
+		  break;
+		case '\r':
+		  if (c == '~')
+		    cur_esc = c;
+		  else
+		    cur_esc = 0;
+		  break;
+		case '~':
+		  if (c == '.' || c == '\004')
+		    return;
+		  else
+		    cur_esc = 0;
+		}
+	    }
+	}
+
+      if (mask & 1)
+	{			/* Port input */
+	  char cx;
+
+	  while (1)
+	    {
+	      c = SERIAL_READCHAR(port_desc, 0);
+
+	      if (c == SERIAL_TIMEOUT)
+		  break;
+
+	      if (c < 0)
+		perror_with_name("connect");
+
+	      cx = c;
+
+	      SERIAL_WRITE(tty_desc, &cx, 1);
+	    }
+	}
+    }
+}
+#endif /* 0 */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+serial_printf (serial_t desc, const char *format, ...)
+#else
+serial_printf (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  char *buf;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  serial_t desc;
+  char *format;
+
+  va_start (args);
+  desc = va_arg (args, serial_t);
+  format = va_arg (args, char *);
+#endif
+
+  vasprintf (&buf, format, args);
+  SERIAL_WRITE (desc, buf, strlen (buf));
+
+  free (buf);
+  va_end (args);
+}
+
+void
+_initialize_serial ()
+{
+#if 0
+  add_com ("connect", class_obscure, connect_command,
+	   "Connect the terminal directly up to the command monitor.\n\
+Use <CR>~. or <CR>~^D to break out.");
+#endif /* 0 */
+
+  add_show_from_set 
+    (add_set_cmd ("remotelogfile", no_class,
+		  var_filename, (char *) &serial_logfile,
+		  "Set filename for remote session recording.\n\
+This file is used to record the remote session for future playback\n\
+by gdbserver.", 
+		  &setlist),
+     &showlist);
+
+  add_show_from_set 
+    (add_set_enum_cmd ("remotelogbase", no_class,
+		       logbase_enums, (char *) &serial_logbase,
+		       "Set numerical base for remote session logging",
+		       &setlist),
+     &showlist);
+}
diff --git a/gdb/serial.h b/gdb/serial.h
new file mode 100644
index 0000000..04332bc
--- /dev/null
+++ b/gdb/serial.h
@@ -0,0 +1,191 @@
+/* Remote serial support interface definitions for GDB, the GNU Debugger.
+   Copyright 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef SERIAL_H
+#define SERIAL_H
+
+/* Terminal state pointer.  This is specific to each type of interface. */
+
+typedef PTR serial_ttystate;
+
+struct _serial_t
+{
+  int fd;			/* File descriptor */
+  struct serial_ops *ops;	/* Function vector */
+  serial_ttystate ttystate;	/* Not used (yet) */
+  int bufcnt;			/* Amount of data in receive buffer */
+  unsigned char *bufp;		/* Current byte */
+  unsigned char buf[BUFSIZ];	/* Da buffer itself */
+  int current_timeout;		/* (termio{s} only), last value of VTIME */
+  /* ser-unix.c termio{,s} only, we still need to wait for this many more
+     seconds.  */
+  int timeout_remaining;
+  char *name;			/* The name of the device or host */
+  struct _serial_t *next;	/* Pointer to the next serial_t */
+  int refcnt;			/* Number of pointers to this block */
+};
+
+typedef struct _serial_t *serial_t;
+
+struct serial_ops {
+  char *name;
+  struct serial_ops *next;
+  int (*open) PARAMS ((serial_t, const char *name));
+  void (*close) PARAMS ((serial_t));
+  int (*readchar) PARAMS ((serial_t, int timeout));
+  int (*write) PARAMS ((serial_t, const char *str, int len));
+  /* Discard pending output */
+  int (*flush_output) PARAMS ((serial_t));
+  /* Discard pending input */
+  int (*flush_input) PARAMS ((serial_t));
+  int (*send_break) PARAMS ((serial_t));
+  void (*go_raw) PARAMS ((serial_t));
+  serial_ttystate (*get_tty_state) PARAMS ((serial_t));
+  int (*set_tty_state) PARAMS ((serial_t, serial_ttystate));
+  void (*print_tty_state) PARAMS ((serial_t, serial_ttystate));
+  int (*noflush_set_tty_state)
+    PARAMS ((serial_t, serial_ttystate, serial_ttystate));
+  int (*setbaudrate) PARAMS ((serial_t, int rate));
+  int (*setstopbits) PARAMS ((serial_t, int num));
+  /* Wait for output to drain */
+  int (*drain_output) PARAMS ((serial_t));
+};
+
+/* Add a new serial interface to the interface list */
+
+void serial_add_interface PARAMS ((struct serial_ops *optable));
+
+serial_t serial_open PARAMS ((const char *name));
+
+serial_t serial_fdopen PARAMS ((const int fd));
+
+/* For most routines, if a failure is indicated, then errno should be
+   examined.  */
+
+/* Try to open NAME.  Returns a new serial_t on success, NULL on failure.
+ */
+
+#define SERIAL_OPEN(NAME) serial_open(NAME)
+
+/* Open a new serial stream using a file handle.  */
+
+#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
+
+/* Allow pending output to drain. */
+
+#define SERIAL_DRAIN_OUTPUT(SERIAL_T) \
+  ((SERIAL_T)->ops->drain_output((SERIAL_T)))
+  
+/* Flush (discard) pending output.  Might also flush input (if this system can't flush
+   only output).  */
+
+#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \
+  ((SERIAL_T)->ops->flush_output((SERIAL_T)))
+
+/* Flush pending input.  Might also flush output (if this system can't flush
+   only input).  */
+
+#define SERIAL_FLUSH_INPUT(SERIAL_T)\
+  ((*(SERIAL_T)->ops->flush_input) ((SERIAL_T)))
+
+/* Send a break between 0.25 and 0.5 seconds long.  */
+
+extern int serial_send_break PARAMS ((serial_t scb));
+
+#define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
+
+/* Turn the port into raw mode. */
+
+#define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T))
+
+/* Return a pointer to a newly malloc'd ttystate containing the state
+   of the tty.  */
+#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T))
+
+/* Set the state of the tty to TTYSTATE.  The change is immediate.
+   When changing to or from raw mode, input might be discarded.
+   Returns 0 for success, negative value for error (in which case errno
+   contains the error).  */
+#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE))
+
+/* printf_filtered a user-comprehensible description of ttystate.  */
+#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \
+  ((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE)))
+
+/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
+   current state (generally obtained from a recent call to
+   SERIAL_GET_TTY_STATE), but be careful not to discard any input.
+   This means that we never switch in or out of raw mode, even
+   if NEW_TTYSTATE specifies a switch.  */
+#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
+  ((*((SERIAL_T)->ops->noflush_set_tty_state)) \
+    ((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)))
+
+/* Read one char from the serial device with TIMEOUT seconds to wait
+   or -1 to wait forever.  Use timeout of 0 to effect a poll. Returns
+   char if ok, else one of the following codes.  Note that all error
+   codes are guaranteed to be < 0.  */
+
+#define SERIAL_ERROR -1		/* General error, see errno for details */
+#define SERIAL_TIMEOUT -2
+#define SERIAL_EOF -3
+
+extern int serial_readchar PARAMS ((serial_t scb, int timeout));
+
+#define SERIAL_READCHAR(SERIAL_T, TIMEOUT)  serial_readchar (SERIAL_T, TIMEOUT)
+
+/* Set the baudrate to the decimal value supplied.  Returns 0 for success,
+   -1 for failure.  */
+
+#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE))
+
+/* Set the number of stop bits to the value specified.  Returns 0 for success,
+   -1 for failure.  */
+
+#define SERIAL_1_STOPBITS 1
+#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
+#define SERIAL_2_STOPBITS 3
+
+#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) ((SERIAL_T)->ops->setstopbits((SERIAL_T), NUM))
+
+/* Write LEN chars from STRING to the port SERIAL_T.  Returns 0 for
+   success, non-zero for failure.  */
+
+extern int serial_write PARAMS ((serial_t scb, const char *str, int len));
+
+#define SERIAL_WRITE(SERIAL_T, STRING,LEN)  serial_write (SERIAL_T, STRING, LEN)
+
+/* Push out all buffers, close the device and destroy SERIAL_T. */
+
+extern void serial_close PARAMS ((serial_t, int));
+
+#define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T, 1)
+
+/* Push out all buffers and destroy SERIAL_T without closing the device.  */
+
+#define SERIAL_UN_FDOPEN(SERIAL_T) serial_close(SERIAL_T, 0)
+
+extern void serial_printf PARAMS ((serial_t desc, const char *, ...))
+     ATTR_FORMAT(printf, 2, 3);
+
+/* File in which to record the remote debugging session */
+
+extern void serial_log_command PARAMS ((const char *));
+
+#endif /* SERIAL_H */
diff --git a/gdb/sh-stub.c b/gdb/sh-stub.c
new file mode 100644
index 0000000..a036cff
--- /dev/null
+++ b/gdb/sh-stub.c
@@ -0,0 +1,1549 @@
+/* sh-stub.c -- debugging stub for the Hitachi-SH. 
+
+ NOTE!! This code has to be compiled with optimization, otherwise the 
+ function inlining which generates the exception handlers won't work.
+ 
+*/
+
+/*   This is originally based on an m68k software stub written by Glenn
+     Engel at HP, but has changed quite a bit. 
+
+     Modifications for the SH by Ben Lee and Steve Chamberlain
+
+*/
+
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+
+/* Remote communication protocol.
+
+   A debug packet whose contents are <data>
+   is encapsulated for transmission in the form:
+
+	$ <data> # CSUM1 CSUM2
+
+	<data> must be ASCII alphanumeric and cannot include characters
+	'$' or '#'.  If <data> starts with two characters followed by
+	':', then the existing stubs interpret this as a sequence number.
+
+	CSUM1 and CSUM2 are ascii hex representation of an 8-bit 
+	checksum of <data>, the most significant nibble is sent first.
+	the hex digits 0-9,a-f are used.
+
+   Receiver responds with:
+
+	+	- if CSUM is correct and ready for next packet
+	-	- if CSUM is incorrect
+
+   <data> is as follows:
+   All values are encoded in ascii hex digits.
+
+	Request		Packet
+
+	read registers  g
+	reply		XX....X		Each byte of register data
+					is described by two hex digits.
+					Registers are in the internal order
+					for GDB, and the bytes in a register
+					are in the same order the machine uses.
+			or ENN		for an error.
+
+	write regs	GXX..XX		Each byte of register data
+					is described by two hex digits.
+	reply		OK		for success
+			ENN		for an error
+
+        write reg	Pn...=r...	Write register n... with value r...,
+					which contains two hex digits for each
+					byte in the register (target byte
+					order).
+	reply		OK		for success
+			ENN		for an error
+	(not supported by all stubs).
+
+	read mem	mAA..AA,LLLL	AA..AA is address, LLLL is length.
+	reply		XX..XX		XX..XX is mem contents
+					Can be fewer bytes than requested
+					if able to read only part of the data.
+			or ENN		NN is errno
+
+	write mem	MAA..AA,LLLL:XX..XX
+					AA..AA is address,
+					LLLL is number of bytes,
+					XX..XX is data
+	reply		OK		for success
+			ENN		for an error (this includes the case
+					where only part of the data was
+					written).
+
+	cont		cAA..AA		AA..AA is address to resume
+					If AA..AA is omitted,
+					resume at same address.
+
+	step		sAA..AA		AA..AA is address to resume
+					If AA..AA is omitted,
+					resume at same address.
+
+	last signal     ?               Reply the current reason for stopping.
+                                        This is the same reply as is generated
+					for step or cont : SAA where AA is the
+					signal number.
+
+	There is no immediate reply to step or cont.
+	The reply comes when the machine stops.
+	It is		SAA		AA is the "signal number"
+
+	or...		TAAn...:r...;n:r...;n...:r...;
+					AA = signal number
+					n... = register number
+					r... = register contents
+	or...		WAA		The process exited, and AA is
+					the exit status.  This is only
+					applicable for certains sorts of
+					targets.
+	kill request	k
+
+	toggle debug	d		toggle debug flag (see 386 & 68k stubs)
+	reset		r		reset -- see sparc stub.
+	reserved	<other>		On other requests, the stub should
+					ignore the request and send an empty
+					response ($#<checksum>).  This way
+					we can extend the protocol and GDB
+					can tell whether the stub it is
+					talking to uses the old or the new.
+	search		tAA:PP,MM	Search backwards starting at address
+					AA for a match with pattern PP and
+					mask MM.  PP and MM are 4 bytes.
+					Not supported by all stubs.
+
+	general query	qXXXX		Request info about XXXX.
+	general set	QXXXX=yyyy	Set value of XXXX to yyyy.
+	query sect offs	qOffsets	Get section offsets.  Reply is
+					Text=xxx;Data=yyy;Bss=zzz
+	console output	Otext		Send text to stdout.  Only comes from
+					remote target.
+
+	Responses can be run-length encoded to save space.  A '*' means that
+	the next character is an ASCII encoding giving a repeat count which
+	stands for that many repititions of the character preceding the '*'.
+	The encoding is n+29, yielding a printable character where n >=3 
+	(which is where rle starts to win).  Don't use an n > 126. 
+
+	So 
+	"0* " means the same as "0000".  */
+
+#include <string.h>
+#include <setjmp.h>
+
+
+
+#define COND_BR_MASK	0xff00
+#define UCOND_DBR_MASK	0xe000
+#define UCOND_RBR_MASK	0xf0df
+#define TRAPA_MASK		0xff00
+
+#define COND_DISP		0x00ff
+#define UCOND_DISP		0x0fff
+#define UCOND_REG		0x0f00
+
+#define BF_INSTR		0x8b00
+#define BT_INSTR		0x8900
+#define BRA_INSTR		0xa000
+#define BSR_INSTR		0xb000
+#define JMP_INSTR		0x402b
+#define JSR_INSTR		0x400b
+#define RTS_INSTR		0x000b
+#define RTE_INSTR		0x002b
+#define TRAPA_INSTR		0xc300
+
+#define SSTEP_INSTR		0xc3ff
+
+#define T_BIT_MASK		0x0001
+/*
+ * BUFMAX defines the maximum number of characters in inbound/outbound
+ * buffers at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 1024
+
+/*
+ * Number of bytes for registers
+ */
+#define NUMREGBYTES 112		/* 92 */
+
+/*
+ * typedef
+ */
+typedef void (*Function) ();
+
+/*
+ * Forward declarations
+ */
+
+static int hex (char);
+static char *mem2hex (char *, char *, int);
+static char *hex2mem (char *, char *, int);
+static int hexToInt (char **, int *);
+static void getpacket (char *);
+static void putpacket (char *);
+static void handle_buserror (void);
+static int computeSignal (int exceptionVector);
+static void handle_exception (int exceptionVector);
+void init_serial();
+
+void putDebugChar (char);
+char getDebugChar (void);
+
+/* These are in the file but in asm statements so the compiler can't see them */
+void catch_exception_4 (void);
+void catch_exception_6 (void);
+void catch_exception_9 (void);
+void catch_exception_10 (void);
+void catch_exception_11 (void);
+void catch_exception_32 (void);
+void catch_exception_33 (void);
+void catch_exception_255 (void);
+
+
+
+#define catch_exception_random catch_exception_255 /* Treat all odd ones like 255 */
+
+void breakpoint (void);
+
+
+#define init_stack_size 8*1024  /* if you change this you should also modify BINIT */
+#define stub_stack_size 8*1024
+
+int init_stack[init_stack_size] __attribute__ ((section ("stack"))) = {0};
+int stub_stack[stub_stack_size] __attribute__ ((section ("stack"))) = {0};
+
+typedef struct
+  {
+    void (*func_cold) ();
+    int *stack_cold;
+    void (*func_warm) ();
+    int *stack_warm;
+    void (*(handler[256 - 4])) ();
+  }
+vec_type;
+
+
+void INIT ();
+void BINIT ();
+
+/* When you link take care that this is at address 0 -
+   or wherever your vbr points */
+
+#define CPU_BUS_ERROR_VEC  9
+#define DMA_BUS_ERROR_VEC 10
+#define NMI_VEC           11
+#define INVALID_INSN_VEC   4
+#define INVALID_SLOT_VEC   6
+#define TRAP_VEC          32
+#define IO_VEC            33
+#define USER_VEC         255
+
+
+#define BCR  (*(volatile short *)(0x05FFFFA0)) /* Bus control register */
+#define BAS  (0x800)				/* Byte access select */
+#define WCR1 (*(volatile short *)(0x05ffffA2)) /* Wait state control register */
+
+const vec_type vectable =
+{ 
+  &BINIT,			/* 0: Power-on reset PC */
+  init_stack + init_stack_size, /* 1: Power-on reset SP */
+  &BINIT,			/* 2: Manual reset PC */
+  init_stack + init_stack_size, /* 3: Manual reset SP */
+{
+  &catch_exception_4,		/* 4: General invalid instruction */
+  &catch_exception_random,	/* 5: Reserved for system */
+  &catch_exception_6,		/* 6: Invalid slot instruction */
+  &catch_exception_random,	/* 7: Reserved for system */
+  &catch_exception_random,	/* 8: Reserved for system */
+  &catch_exception_9,		/* 9: CPU bus error */
+  &catch_exception_10,		/* 10: DMA bus error */
+  &catch_exception_11,		/* 11: NMI */
+  &catch_exception_random,	/* 12: User break */
+  &catch_exception_random,	/* 13: Reserved for system */
+  &catch_exception_random,	/* 14: Reserved for system */
+  &catch_exception_random,	/* 15: Reserved for system */
+  &catch_exception_random,	/* 16: Reserved for system */
+  &catch_exception_random,	/* 17: Reserved for system */
+  &catch_exception_random,	/* 18: Reserved for system */
+  &catch_exception_random,	/* 19: Reserved for system */
+  &catch_exception_random,	/* 20: Reserved for system */
+  &catch_exception_random,	/* 21: Reserved for system */
+  &catch_exception_random,	/* 22: Reserved for system */
+  &catch_exception_random,	/* 23: Reserved for system */
+  &catch_exception_random,	/* 24: Reserved for system */
+  &catch_exception_random,	/* 25: Reserved for system */
+  &catch_exception_random,	/* 26: Reserved for system */
+  &catch_exception_random,	/* 27: Reserved for system */
+  &catch_exception_random,	/* 28: Reserved for system */
+  &catch_exception_random,	/* 29: Reserved for system */
+  &catch_exception_random,	/* 30: Reserved for system */
+  &catch_exception_random,	/* 31: Reserved for system */
+  &catch_exception_32,		/* 32: Trap instr (user vectors) */
+  &catch_exception_33,		/* 33: Trap instr (user vectors) */
+  &catch_exception_random,	/* 34: Trap instr (user vectors) */
+  &catch_exception_random,	/* 35: Trap instr (user vectors) */
+  &catch_exception_random,	/* 36: Trap instr (user vectors) */
+  &catch_exception_random,	/* 37: Trap instr (user vectors) */
+  &catch_exception_random,	/* 38: Trap instr (user vectors) */
+  &catch_exception_random,	/* 39: Trap instr (user vectors) */
+  &catch_exception_random,	/* 40: Trap instr (user vectors) */
+  &catch_exception_random,	/* 41: Trap instr (user vectors) */
+  &catch_exception_random,	/* 42: Trap instr (user vectors) */
+  &catch_exception_random,	/* 43: Trap instr (user vectors) */
+  &catch_exception_random,	/* 44: Trap instr (user vectors) */
+  &catch_exception_random,	/* 45: Trap instr (user vectors) */
+  &catch_exception_random,	/* 46: Trap instr (user vectors) */
+  &catch_exception_random,	/* 47: Trap instr (user vectors) */
+  &catch_exception_random,	/* 48: Trap instr (user vectors) */
+  &catch_exception_random,	/* 49: Trap instr (user vectors) */
+  &catch_exception_random,	/* 50: Trap instr (user vectors) */
+  &catch_exception_random,	/* 51: Trap instr (user vectors) */
+  &catch_exception_random,	/* 52: Trap instr (user vectors) */
+  &catch_exception_random,	/* 53: Trap instr (user vectors) */
+  &catch_exception_random,	/* 54: Trap instr (user vectors) */
+  &catch_exception_random,	/* 55: Trap instr (user vectors) */
+  &catch_exception_random,	/* 56: Trap instr (user vectors) */
+  &catch_exception_random,	/* 57: Trap instr (user vectors) */
+  &catch_exception_random,	/* 58: Trap instr (user vectors) */
+  &catch_exception_random,	/* 59: Trap instr (user vectors) */
+  &catch_exception_random,	/* 60: Trap instr (user vectors) */
+  &catch_exception_random,	/* 61: Trap instr (user vectors) */
+  &catch_exception_random,	/* 62: Trap instr (user vectors) */
+  &catch_exception_random,	/* 63: Trap instr (user vectors) */
+  &catch_exception_random,	/* 64: IRQ0 */
+  &catch_exception_random,	/* 65: IRQ1 */
+  &catch_exception_random,	/* 66: IRQ2 */
+  &catch_exception_random,	/* 67: IRQ3 */
+  &catch_exception_random,	/* 68: IRQ4 */
+  &catch_exception_random,	/* 69: IRQ5 */
+  &catch_exception_random,	/* 70: IRQ6 */
+  &catch_exception_random,	/* 71: IRQ7 */
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+  &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_random,
+     &catch_exception_255}};
+
+
+char in_nmi;   /* Set when handling an NMI, so we don't reenter */
+int dofault;  /* Non zero, bus errors will raise exception */
+
+int *stub_sp;
+
+/* debug > 0 prints ill-formed commands in valid packets & checksum errors */
+int remote_debug;
+
+/* jump buffer used for setjmp/longjmp */
+jmp_buf remcomEnv;
+
+enum regnames
+  {
+    R0, R1, R2, R3, R4, R5, R6, R7,
+    R8, R9, R10, R11, R12, R13, R14,
+    R15, PC, PR, GBR, VBR, MACH, MACL, SR,
+    TICKS, STALLS, CYCLES, INSTS, PLR
+  };
+
+typedef struct
+  {
+    short *memAddr;
+    short oldInstr;
+  }
+stepData;
+
+int registers[NUMREGBYTES / 4];
+stepData instrBuffer;
+char stepped;
+static const char hexchars[] = "0123456789abcdef";
+char remcomInBuffer[BUFMAX];
+char remcomOutBuffer[BUFMAX];
+
+char highhex(int  x)
+{
+  return hexchars[(x >> 4) & 0xf];
+}
+
+char lowhex(int  x)
+{
+  return hexchars[x & 0xf];
+}
+
+/*
+ * Assembly macros
+ */
+
+#define BREAKPOINT()   asm("trapa	#0x20"::);
+
+
+/*
+ * Routines to handle hex data
+ */
+
+static int
+hex (char ch)
+{
+  if ((ch >= 'a') && (ch <= 'f'))
+    return (ch - 'a' + 10);
+  if ((ch >= '0') && (ch <= '9'))
+    return (ch - '0');
+  if ((ch >= 'A') && (ch <= 'F'))
+    return (ch - 'A' + 10);
+  return (-1);
+}
+
+/* convert the memory, pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+static char *
+mem2hex (char *mem, char *buf, int count)
+{
+  int i;
+  int ch;
+  for (i = 0; i < count; i++)
+    {
+      ch = *mem++;
+      *buf++ = highhex (ch);
+      *buf++ = lowhex (ch);
+    }
+  *buf = 0;
+  return (buf);
+}
+
+/* convert the hex array pointed to by buf into binary, to be placed in mem */
+/* return a pointer to the character after the last byte written */
+
+static char *
+hex2mem (char *buf, char *mem, int count)
+{
+  int i;
+  unsigned char ch;
+  for (i = 0; i < count; i++)
+    {
+      ch = hex (*buf++) << 4;
+      ch = ch + hex (*buf++);
+      *mem++ = ch;
+    }
+  return (mem);
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+static int
+hexToInt (char **ptr, int *intValue)
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+
+  while (**ptr)
+    {
+      hexValue = hex (**ptr);
+      if (hexValue >= 0)
+	{
+	  *intValue = (*intValue << 4) | hexValue;
+	  numChars++;
+	}
+      else
+	break;
+
+      (*ptr)++;
+    }
+
+  return (numChars);
+}
+
+/*
+ * Routines to get and put packets
+ */
+
+/* scan for the sequence $<data>#<checksum>     */
+
+static
+void
+getpacket (char *buffer)
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int i;
+  int count;
+  char ch;
+  do
+    {
+      /* wait around for the start character, ignore all other characters */
+      while ((ch = getDebugChar ()) != '$');
+      checksum = 0;
+      xmitcsum = -1;
+
+      count = 0;
+
+      /* now, read until a # or end of buffer is found */
+      while (count < BUFMAX)
+	{
+	  ch = getDebugChar ();
+	  if (ch == '#')
+	    break;
+	  checksum = checksum + ch;
+	  buffer[count] = ch;
+	  count = count + 1;
+	}
+      buffer[count] = 0;
+
+      if (ch == '#')
+	{
+	  xmitcsum = hex (getDebugChar ()) << 4;
+	  xmitcsum += hex (getDebugChar ());
+	  if (checksum != xmitcsum)
+	    putDebugChar ('-');	/* failed checksum */
+	  else
+	    {
+	      putDebugChar ('+');	/* successful transfer */
+	      /* if a sequence char is present, reply the sequence ID */
+	      if (buffer[2] == ':')
+		{
+		  putDebugChar (buffer[0]);
+		  putDebugChar (buffer[1]);
+		  /* remove sequence chars from buffer */
+		  count = strlen (buffer);
+		  for (i = 3; i <= count; i++)
+		    buffer[i - 3] = buffer[i];
+		}
+	    }
+	}
+    }
+  while (checksum != xmitcsum);
+
+}
+
+
+/* send the packet in buffer.  The host get's one chance to read it.
+   This routine does not wait for a positive acknowledge.  */
+
+static void
+putpacket (register char *buffer)
+{
+  register  int checksum;
+  register  int count;
+
+  /*  $<packet info>#<checksum>. */
+  do
+    {
+      char *src = buffer;
+      putDebugChar ('$');
+      checksum = 0;
+
+      while (*src)
+	{
+	  int runlen;
+
+	  /* Do run length encoding */
+	  for (runlen = 0; runlen < 100; runlen ++) 
+	    {
+	      if (src[0] != src[runlen]) 
+		{
+		  if (runlen > 3) 
+		    {
+		      int encode;
+		      /* Got a useful amount */
+		      putDebugChar (*src);
+		      checksum += *src;
+		      putDebugChar ('*');
+		      checksum += '*';
+		      checksum += (encode = runlen + ' ' - 4);
+		      putDebugChar (encode);
+		      src += runlen;
+		    }
+		  else
+		    {
+		      putDebugChar (*src);
+		      checksum += *src;
+		      src++;
+		    }
+		  break;
+		}
+	    }
+	}
+
+
+      putDebugChar ('#');
+      putDebugChar (highhex(checksum));
+      putDebugChar (lowhex(checksum));
+    }
+  while  (getDebugChar() != '+');
+
+}
+
+
+/* a bus error has occurred, perform a longjmp
+   to return execution and allow handling of the error */
+
+void
+handle_buserror (void)
+{
+  longjmp (remcomEnv, 1);
+}
+
+/*
+ * this function takes the SH-1 exception number and attempts to
+ * translate this number into a unix compatible signal value
+ */
+static int
+computeSignal (int exceptionVector)
+{
+  int sigval;
+  switch (exceptionVector)
+    {
+    case INVALID_INSN_VEC:
+      sigval = 4;
+      break;			
+    case INVALID_SLOT_VEC:
+      sigval = 4;
+      break;			
+    case CPU_BUS_ERROR_VEC:
+      sigval = 10;
+      break;			
+    case DMA_BUS_ERROR_VEC:
+      sigval = 10;
+      break;	
+    case NMI_VEC:
+      sigval = 2;
+      break;	
+
+    case TRAP_VEC:
+    case USER_VEC:
+      sigval = 5;
+      break;
+
+    default:
+      sigval = 7;		/* "software generated"*/
+      break;
+    }
+  return (sigval);
+}
+
+void
+doSStep (void)
+{
+  short *instrMem;
+  int displacement;
+  int reg;
+  unsigned short opcode;
+
+  instrMem = (short *) registers[PC];
+
+  opcode = *instrMem;
+  stepped = 1;
+
+  if ((opcode & COND_BR_MASK) == BT_INSTR)
+    {
+      if (registers[SR] & T_BIT_MASK)
+	{
+	  displacement = (opcode & COND_DISP) << 1;
+	  if (displacement & 0x80)
+	    displacement |= 0xffffff00;
+	  /*
+		   * Remember PC points to second instr.
+		   * after PC of branch ... so add 4
+		   */
+	  instrMem = (short *) (registers[PC] + displacement + 4);
+	}
+      else
+	instrMem += 1;
+    }
+  else if ((opcode & COND_BR_MASK) == BF_INSTR)
+    {
+      if (registers[SR] & T_BIT_MASK)
+	instrMem += 1;
+      else
+	{
+	  displacement = (opcode & COND_DISP) << 1;
+	  if (displacement & 0x80)
+	    displacement |= 0xffffff00;
+	  /*
+		   * Remember PC points to second instr.
+		   * after PC of branch ... so add 4
+		   */
+	  instrMem = (short *) (registers[PC] + displacement + 4);
+	}
+    }
+  else if ((opcode & UCOND_DBR_MASK) == BRA_INSTR)
+    {
+      displacement = (opcode & UCOND_DISP) << 1;
+      if (displacement & 0x0800)
+	displacement |= 0xfffff000;
+
+      /*
+	   * Remember PC points to second instr.
+	   * after PC of branch ... so add 4
+	   */
+      instrMem = (short *) (registers[PC] + displacement + 4);
+    }
+  else if ((opcode & UCOND_RBR_MASK) == JSR_INSTR)
+    {
+      reg = (char) ((opcode & UCOND_REG) >> 8);
+
+      instrMem = (short *) registers[reg];
+    }
+  else if (opcode == RTS_INSTR)
+    instrMem = (short *) registers[PR];
+  else if (opcode == RTE_INSTR)
+    instrMem = (short *) registers[15];
+  else if ((opcode & TRAPA_MASK) == TRAPA_INSTR)
+    instrMem = (short *) ((opcode & ~TRAPA_MASK) << 2);
+  else
+    instrMem += 1;
+
+  instrBuffer.memAddr = instrMem;
+  instrBuffer.oldInstr = *instrMem;
+  *instrMem = SSTEP_INSTR;
+}
+
+
+/* Undo the effect of a previous doSStep.  If we single stepped,
+   restore the old instruction. */
+
+void
+undoSStep (void)
+{
+  if (stepped)
+    {  short *instrMem;
+      instrMem = instrBuffer.memAddr;
+      *instrMem = instrBuffer.oldInstr;
+    }
+  stepped = 0;
+}
+
+/*
+This function does all exception handling.  It only does two things -
+it figures out why it was called and tells gdb, and then it reacts
+to gdb's requests.
+
+When in the monitor mode we talk a human on the serial line rather than gdb.
+
+*/
+
+
+void
+gdb_handle_exception (int exceptionVector)
+{
+  int sigval;
+  int addr, length;
+  char *ptr;
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal (exceptionVector);
+  remcomOutBuffer[0] = 'S';
+  remcomOutBuffer[1] = highhex(sigval);
+  remcomOutBuffer[2] = lowhex (sigval);
+  remcomOutBuffer[3] = 0;
+
+  putpacket (remcomOutBuffer);
+
+  /*
+   * exception 255 indicates a software trap
+   * inserted in place of code ... so back up
+   * PC by one instruction, since this instruction
+   * will later be replaced by its original one!
+   */
+  if (exceptionVector == 0xff
+      || exceptionVector == 0x20)
+    registers[PC] -= 2;
+
+  /*
+   * Do the thangs needed to undo
+   * any stepping we may have done!
+   */
+  undoSStep ();
+
+  while (1)
+    {
+      remcomOutBuffer[0] = 0;
+      getpacket (remcomInBuffer);
+
+      switch (remcomInBuffer[0])
+	{
+	case '?':
+	  remcomOutBuffer[0] = 'S';
+	  remcomOutBuffer[1] = highhex (sigval);
+	  remcomOutBuffer[2] = lowhex (sigval);
+	  remcomOutBuffer[3] = 0;
+	  break;
+	case 'd':
+	  remote_debug = !(remote_debug);	/* toggle debug flag */
+	  break;
+	case 'g':		/* return the value of the CPU registers */
+	  mem2hex ((char *) registers, remcomOutBuffer, NUMREGBYTES);
+	  break;
+	case 'G':		/* set the value of the CPU registers - return OK */
+	  hex2mem (&remcomInBuffer[1], (char *) registers, NUMREGBYTES);
+	  strcpy (remcomOutBuffer, "OK");
+	  break;
+
+	  /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+	case 'm':
+	  if (setjmp (remcomEnv) == 0)
+	    {
+	      dofault = 0;
+	      /* TRY, TO READ %x,%x.  IF SUCCEED, SET PTR = 0 */
+	      ptr = &remcomInBuffer[1];
+	      if (hexToInt (&ptr, &addr))
+		if (*(ptr++) == ',')
+		  if (hexToInt (&ptr, &length))
+		    {
+		      ptr = 0;
+		      mem2hex ((char *) addr, remcomOutBuffer, length);
+		    }
+	      if (ptr)
+		strcpy (remcomOutBuffer, "E01");
+	    }
+	  else
+	    strcpy (remcomOutBuffer, "E03");
+
+	  /* restore handler for bus error */
+	  dofault = 1;
+	  break;
+
+	  /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+	case 'M':
+	  if (setjmp (remcomEnv) == 0)
+	    {
+	      dofault = 0;
+
+	      /* TRY, TO READ '%x,%x:'.  IF SUCCEED, SET PTR = 0 */
+	      ptr = &remcomInBuffer[1];
+	      if (hexToInt (&ptr, &addr))
+		if (*(ptr++) == ',')
+		  if (hexToInt (&ptr, &length))
+		    if (*(ptr++) == ':')
+		      {
+			hex2mem (ptr, (char *) addr, length);
+			ptr = 0;
+			strcpy (remcomOutBuffer, "OK");
+		      }
+	      if (ptr)
+		strcpy (remcomOutBuffer, "E02");
+	    }
+	  else
+	    strcpy (remcomOutBuffer, "E03");
+
+	  /* restore handler for bus error */
+	  dofault = 1;
+	  break;
+
+	  /* cAA..AA    Continue at address AA..AA(optional) */
+	  /* sAA..AA   Step one instruction from AA..AA(optional) */
+	case 'c':
+	case 's':
+	  {
+	    /* tRY, to read optional parameter, pc unchanged if no parm */
+	    ptr = &remcomInBuffer[1];
+	    if (hexToInt (&ptr, &addr))
+	      registers[PC] = addr;
+
+	    if (remcomInBuffer[0] == 's')
+	      doSStep ();
+	  }
+	  return;
+	  break;
+
+	  /* kill the program */
+	case 'k':		/* do nothing */
+	  break;
+	}			/* switch */
+
+      /* reply to the request */
+      putpacket (remcomOutBuffer);
+    }
+}
+
+
+#define GDBCOOKIE 0x5ac 
+static int ingdbmode;
+/* We've had an exception - choose to go into the monitor or
+   the gdb stub */
+void handle_exception(int exceptionVector)
+{
+#ifdef MONITOR
+    if (ingdbmode != GDBCOOKIE)
+      monitor_handle_exception (exceptionVector);
+    else 
+#endif
+      gdb_handle_exception (exceptionVector);
+
+}
+
+void
+gdb_mode()
+{
+  ingdbmode = GDBCOOKIE;
+  breakpoint();
+}
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint (void)
+{
+      BREAKPOINT ();
+}
+
+asm ("_BINIT: mov.l  L1,r15");
+asm ("bra _INIT");
+asm ("nop");
+asm ("L1: .long _init_stack + 8*1024*4");
+void
+INIT (void)
+{
+  /* First turn on the ram */
+  WCR1  = 0;    /* Never sample wait */
+  BCR = BAS;    /* use lowbyte/high byte */
+
+  init_serial();
+
+#ifdef MONITOR
+  reset_hook ();
+#endif
+
+
+  in_nmi = 0;
+  dofault = 1;
+  stepped = 0;
+
+  stub_sp = stub_stack + stub_stack_size;
+  breakpoint ();
+
+  while (1)
+    ;
+}
+
+
+static void sr()
+{
+
+
+  /* Calling Reset does the same as pressing the button */
+  asm (".global _Reset
+        .global _WarmReset
+_Reset:
+_WarmReset:
+         mov.l L_sp,r15
+         bra   _INIT
+         nop
+         .align 2
+L_sp:    .long _init_stack + 8000");
+
+  asm("saveRegisters:
+	mov.l	@(L_reg, pc), r0
+	mov.l	@r15+, r1				! pop R0
+	mov.l	r2, @(0x08, r0)				! save R2
+	mov.l	r1, @r0					! save R0
+	mov.l	@r15+, r1				! pop R1
+	mov.l	r3, @(0x0c, r0)				! save R3
+	mov.l	r1, @(0x04, r0)				! save R1
+	mov.l	r4, @(0x10, r0)				! save R4
+	mov.l	r5, @(0x14, r0)				! save R5
+	mov.l	r6, @(0x18, r0)				! save R6
+	mov.l	r7, @(0x1c, r0)				! save R7
+	mov.l	r8, @(0x20, r0)				! save R8
+	mov.l	r9, @(0x24, r0)				! save R9
+	mov.l	r10, @(0x28, r0)			! save R10
+	mov.l	r11, @(0x2c, r0)			! save R11
+	mov.l	r12, @(0x30, r0)			! save R12
+	mov.l	r13, @(0x34, r0)			! save R13
+	mov.l	r14, @(0x38, r0)			! save R14
+	mov.l	@r15+, r4				! save arg to handleException
+	add	#8, r15					! hide PC/SR values on stack
+	mov.l	r15, @(0x3c, r0)			! save R15
+	add	#-8, r15				! save still needs old SP value
+	add	#92, r0					! readjust register pointer
+	mov	r15, r2
+	add	#4, r2
+	mov.l	@r2, r2					! R2 has SR
+	mov.l	@r15, r1				! R1 has PC
+	mov.l	r2, @-r0				! save SR
+	sts.l	macl, @-r0				! save MACL
+	sts.l	mach, @-r0				! save MACH
+	stc.l	vbr, @-r0				! save VBR
+	stc.l	gbr, @-r0				! save GBR
+	sts.l	pr, @-r0				! save PR
+	mov.l	@(L_stubstack, pc), r2
+	mov.l	@(L_hdl_except, pc), r3
+	mov.l	@r2, r15
+	jsr	@r3
+	mov.l	r1, @-r0				! save PC
+	mov.l	@(L_stubstack, pc), r0
+	mov.l	@(L_reg, pc), r1
+	bra	restoreRegisters
+	mov.l	r15, @r0				! save __stub_stack
+	
+	.align 2
+L_reg:
+	.long	_registers
+L_stubstack:
+	.long	_stub_sp
+L_hdl_except:
+	.long	_handle_exception");
+
+}
+
+static void rr()
+{
+asm("
+	.align 2	
+        .global _resume
+_resume:
+	mov	r4,r1
+restoreRegisters:
+	add	#8, r1						! skip to R2
+	mov.l	@r1+, r2					! restore R2
+	mov.l	@r1+, r3					! restore R3
+	mov.l	@r1+, r4					! restore R4
+	mov.l	@r1+, r5					! restore R5
+	mov.l	@r1+, r6					! restore R6
+	mov.l	@r1+, r7					! restore R7
+	mov.l	@r1+, r8					! restore R8
+	mov.l	@r1+, r9					! restore R9
+	mov.l	@r1+, r10					! restore R10
+	mov.l	@r1+, r11					! restore R11
+	mov.l	@r1+, r12					! restore R12
+	mov.l	@r1+, r13					! restore R13
+	mov.l	@r1+, r14					! restore R14
+	mov.l	@r1+, r15					! restore programs stack
+	mov.l	@r1+, r0
+	add	#-8, r15					! uncover PC/SR on stack 
+	mov.l	r0, @r15					! restore PC onto stack
+	lds.l	@r1+, pr					! restore PR
+	ldc.l	@r1+, gbr					! restore GBR		
+	ldc.l	@r1+, vbr					! restore VBR
+	lds.l	@r1+, mach					! restore MACH
+	lds.l	@r1+, macl					! restore MACL
+	mov.l	@r1, r0	
+	add	#-88, r1					! readjust reg pointer to R1
+	mov.l	r0, @(4, r15)					! restore SR onto stack+4
+	mov.l	r2, @-r15
+	mov.l	L_in_nmi, r0
+	mov		#0, r2
+	mov.b	r2, @r0
+	mov.l	@r15+, r2
+	mov.l	@r1+, r0					! restore R0
+	rte
+	mov.l	@r1, r1						! restore R1
+
+");
+}
+
+
+static __inline__ void code_for_catch_exception(int n) 
+{
+  asm("		.globl	_catch_exception_%O0" : : "i" (n) 				); 
+  asm("	_catch_exception_%O0:" :: "i" (n)      						);
+
+  asm("		add	#-4, r15 				! reserve spot on stack ");
+  asm("		mov.l	r1, @-r15				! push R1		");
+
+  if (n == NMI_VEC) 
+    {
+      /* Special case for NMI - make sure that they don't nest */
+      asm("	mov.l	r0, @-r15					! push R0");
+      asm("	mov.l	L_in_nmi, r0");
+      asm("	tas.b	@r0						! Fend off against addtnl NMIs");
+      asm("	bt		noNMI");
+      asm("	mov.l	@r15+, r0");
+      asm("	mov.l	@r15+, r1");
+      asm("	add		#4, r15");
+      asm("	rte");
+      asm("	nop");
+      asm(".align 2");
+      asm("L_in_nmi: .long	_in_nmi");
+      asm("noNMI:");
+    }
+  else
+    {
+
+      if (n == CPU_BUS_ERROR_VEC)
+	{
+	  /* Exception 9 (bus errors) are disasbleable - so that you
+	     can probe memory and get zero instead of a fault.
+	     Because the vector table may be in ROM we don't revector
+	     the interrupt like all the other stubs, we check in here
+	     */
+	  asm("mov.l	L_dofault,r1");
+	  asm("mov.l	@r1,r1");
+	  asm("tst	r1,r1");
+	  asm("bf	faultaway");
+	  asm("bsr	_handle_buserror");
+	  asm(".align	2");
+	  asm("L_dofault: .long _dofault");
+	  asm("faultaway:");
+	}
+      asm("		mov	#15<<4, r1							");
+      asm("		ldc	r1, sr					! disable interrupts	");
+      asm("		mov.l	r0, @-r15				! push R0		");
+    }
+
+  /* Prepare for saving context, we've already pushed r0 and r1, stick exception number
+     into the frame */
+  asm("		mov	r15, r0								");
+  asm("		add	#8, r0								");
+  asm("		mov	%0,r1" :: "i" (n)        					);
+  asm("		extu.b  r1,r1								");
+  asm("		bra	saveRegisters				! save register values	");
+  asm("		mov.l	r1, @r0					! save exception # 	");
+}
+
+
+static  void
+exceptions()
+{
+  code_for_catch_exception (CPU_BUS_ERROR_VEC);
+  code_for_catch_exception (DMA_BUS_ERROR_VEC);
+  code_for_catch_exception (INVALID_INSN_VEC);
+  code_for_catch_exception (INVALID_SLOT_VEC);
+  code_for_catch_exception (NMI_VEC);
+  code_for_catch_exception (TRAP_VEC);
+  code_for_catch_exception (USER_VEC);
+  code_for_catch_exception (IO_VEC);
+}
+
+
+
+
+
+
+/* Support for Serial I/O using on chip uart */
+
+#define SMR0 (*(volatile char *)(0x05FFFEC0)) /* Channel 0  serial mode register */
+#define BRR0 (*(volatile char *)(0x05FFFEC1)) /* Channel 0  bit rate register */
+#define SCR0 (*(volatile char *)(0x05FFFEC2)) /* Channel 0  serial control register */
+#define TDR0 (*(volatile char *)(0x05FFFEC3)) /* Channel 0  transmit data register */
+#define SSR0 (*(volatile char *)(0x05FFFEC4)) /* Channel 0  serial status register */
+#define RDR0 (*(volatile char *)(0x05FFFEC5)) /* Channel 0  receive data register */
+
+#define SMR1 (*(volatile char *)(0x05FFFEC8)) /* Channel 1  serial mode register */
+#define BRR1 (*(volatile char *)(0x05FFFEC9)) /* Channel 1  bit rate register */
+#define SCR1 (*(volatile char *)(0x05FFFECA)) /* Channel 1  serial control register */
+#define TDR1 (*(volatile char *)(0x05FFFECB)) /* Channel 1  transmit data register */
+#define SSR1 (*(volatile char *)(0x05FFFECC)) /* Channel 1  serial status register */
+#define RDR1 (*(volatile char *)(0x05FFFECD)) /* Channel 1  receive data register */
+
+/*
+ * Serial mode register bits
+ */
+
+#define SYNC_MODE 		0x80
+#define SEVEN_BIT_DATA 		0x40
+#define PARITY_ON		0x20
+#define ODD_PARITY		0x10
+#define STOP_BITS_2		0x08
+#define ENABLE_MULTIP		0x04
+#define PHI_64			0x03
+#define PHI_16			0x02
+#define PHI_4			0x01
+
+/*
+ * Serial control register bits
+ */
+#define SCI_TIE				0x80	/* Transmit interrupt enable */
+#define SCI_RIE				0x40	/* Receive interrupt enable */
+#define SCI_TE				0x20	/* Transmit enable */
+#define SCI_RE				0x10	/* Receive enable */
+#define SCI_MPIE			0x08	/* Multiprocessor interrupt enable */
+#define SCI_TEIE			0x04	/* Transmit end interrupt enable */
+#define SCI_CKE1			0x02	/* Clock enable 1 */
+#define SCI_CKE0			0x01	/* Clock enable 0 */
+
+/*
+ * Serial status register bits
+ */
+#define SCI_TDRE			0x80	/* Transmit data register empty */
+#define SCI_RDRF			0x40	/* Receive data register full */
+#define SCI_ORER			0x20	/* Overrun error */
+#define SCI_FER				0x10	/* Framing error */
+#define SCI_PER				0x08	/* Parity error */
+#define SCI_TEND			0x04	/* Transmit end */
+#define SCI_MPB				0x02	/* Multiprocessor bit */
+#define SCI_MPBT			0x01	/* Multiprocessor bit transfer */
+
+
+/*
+ * Port B IO Register (PBIOR)
+ */
+#define	PBIOR 		(*(volatile char *)(0x05FFFFC6))
+#define	PB15IOR 	0x8000
+#define	PB14IOR 	0x4000
+#define	PB13IOR 	0x2000
+#define	PB12IOR 	0x1000
+#define	PB11IOR 	0x0800
+#define	PB10IOR 	0x0400
+#define	PB9IOR 		0x0200
+#define	PB8IOR 		0x0100
+#define	PB7IOR 		0x0080
+#define	PB6IOR 		0x0040
+#define	PB5IOR 		0x0020
+#define	PB4IOR 		0x0010
+#define	PB3IOR 		0x0008
+#define	PB2IOR 		0x0004
+#define	PB1IOR 		0x0002
+#define	PB0IOR 		0x0001
+
+/*
+ * Port B Control Register (PBCR1)
+ */
+#define	PBCR1 		(*(volatile short *)(0x05FFFFCC))
+#define	PB15MD1 	0x8000
+#define	PB15MD0 	0x4000
+#define	PB14MD1 	0x2000
+#define	PB14MD0 	0x1000
+#define	PB13MD1 	0x0800
+#define	PB13MD0 	0x0400
+#define	PB12MD1 	0x0200
+#define	PB12MD0 	0x0100
+#define	PB11MD1 	0x0080
+#define	PB11MD0 	0x0040
+#define	PB10MD1 	0x0020
+#define	PB10MD0 	0x0010
+#define	PB9MD1 		0x0008
+#define	PB9MD0 		0x0004
+#define	PB8MD1 		0x0002
+#define	PB8MD0 		0x0001
+
+#define	PB15MD 		PB15MD1|PB14MD0
+#define	PB14MD 		PB14MD1|PB14MD0
+#define	PB13MD 		PB13MD1|PB13MD0
+#define	PB12MD 		PB12MD1|PB12MD0
+#define	PB11MD 		PB11MD1|PB11MD0
+#define	PB10MD 		PB10MD1|PB10MD0
+#define	PB9MD 		PB9MD1|PB9MD0
+#define	PB8MD 		PB8MD1|PB8MD0
+
+#define PB_TXD1 	PB11MD1
+#define PB_RXD1 	PB10MD1
+#define PB_TXD0 	PB9MD1
+#define PB_RXD0 	PB8MD1
+
+/*
+ * Port B Control Register (PBCR2)
+ */
+#define	PBCR2 	0x05FFFFCE
+#define	PB7MD1 	0x8000
+#define	PB7MD0 	0x4000
+#define	PB6MD1 	0x2000
+#define	PB6MD0 	0x1000
+#define	PB5MD1 	0x0800
+#define	PB5MD0 	0x0400
+#define	PB4MD1 	0x0200
+#define	PB4MD0 	0x0100
+#define	PB3MD1 	0x0080
+#define	PB3MD0 	0x0040
+#define	PB2MD1 	0x0020
+#define	PB2MD0 	0x0010
+#define	PB1MD1 	0x0008
+#define	PB1MD0 	0x0004
+#define	PB0MD1 	0x0002
+#define	PB0MD0 	0x0001
+	
+#define	PB7MD 	PB7MD1|PB7MD0
+#define	PB6MD 	PB6MD1|PB6MD0
+#define	PB5MD 	PB5MD1|PB5MD0
+#define	PB4MD 	PB4MD1|PB4MD0
+#define	PB3MD 	PB3MD1|PB3MD0
+#define	PB2MD 	PB2MD1|PB2MD0
+#define	PB1MD 	PB1MD1|PB1MD0
+#define	PB0MD 	PB0MD1|PB0MD0
+
+
+#ifdef MHZ
+#define BPS			32 * 9600 * MHZ / ( BAUD * 10)
+#else
+#define BPS			32	/* 9600 for 10 Mhz */
+#endif
+
+void handleError (char theSSR);
+
+void
+nop ()
+{
+
+}
+void 
+init_serial()
+{
+  int i;
+
+  /* Clear TE and RE in Channel 1's SCR   */
+  SCR1 &= ~(SCI_TE | SCI_RE);
+
+  /* Set communication to be async, 8-bit data, no parity, 1 stop bit and use internal clock */
+
+  SMR1 = 0;
+  BRR1 = BPS;
+
+  SCR1 &= ~(SCI_CKE1 | SCI_CKE0);
+
+  /* let the hardware settle */
+
+  for (i = 0; i < 1000; i++)
+    nop ();
+
+  /* Turn on in and out */
+  SCR1 |= SCI_RE | SCI_TE;
+
+  /* Set the PFC to make RXD1 (pin PB8) an input pin and TXD1 (pin PB9) an output pin */
+  PBCR1 &= ~(PB_TXD1 | PB_RXD1);
+  PBCR1 |= PB_TXD1 | PB_RXD1;
+}
+
+
+int
+getDebugCharReady (void)
+{
+  char mySSR;
+  mySSR = SSR1 & ( SCI_PER | SCI_FER | SCI_ORER );
+  if ( mySSR )
+    handleError ( mySSR );
+  return SSR1 & SCI_RDRF ;
+}
+
+char 
+getDebugChar (void)
+{
+  char ch;
+  char mySSR;
+
+  while ( ! getDebugCharReady())
+    ;
+
+  ch = RDR1;
+  SSR1 &= ~SCI_RDRF;
+
+  mySSR = SSR1 & (SCI_PER | SCI_FER | SCI_ORER);
+
+  if (mySSR)
+    handleError (mySSR);
+
+  return ch;
+}
+
+int 
+putDebugCharReady()
+{
+  return (SSR1 & SCI_TDRE);
+}
+
+void
+putDebugChar (char ch)
+{
+  while (!putDebugCharReady())
+    ;
+
+  /*
+   * Write data into TDR and clear TDRE
+   */
+  TDR1 = ch;
+  SSR1 &= ~SCI_TDRE;
+}
+
+void 
+handleError (char theSSR)
+{
+  SSR1 &= ~(SCI_ORER | SCI_PER | SCI_FER);
+}
+
diff --git a/gdb/sh-tdep.c b/gdb/sh-tdep.c
new file mode 100644
index 0000000..dd94506
--- /dev/null
+++ b/gdb/sh-tdep.c
@@ -0,0 +1,728 @@
+/* Target-dependent code for Hitachi Super-H, for GDB.
+   Copyright 1993, 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ Contributed by Steve Chamberlain
+                sac@cygnus.com
+ */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "symfile.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "value.h"
+#include "dis-asm.h"
+#include "inferior.h"		/* for BEFORE_TEXT_END etc. */
+#include "gdb_string.h"
+
+/* A set of original names, to be used when restoring back to generic
+   registers from a specific set.  */
+
+static char *sh_generic_reg_names[] = {
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "pc",   "pr",   "gbr",  "vbr",  "mach", "macl", "sr",
+  "fpul", "fpscr",
+  "fr0",  "fr1",  "fr2",  "fr3",  "fr4",  "fr5",  "fr6",  "fr7",
+  "fr8",  "fr9",  "fr10", "fr11", "fr12", "fr13", "fr14", "fr15",
+  "ssr",  "spc",
+  "r0b0", "r1b0", "r2b0", "r3b0", "r4b0", "r5b0", "r6b0", "r7b0",
+  "r0b1", "r1b1", "r2b1", "r3b1", "r4b1", "r5b1", "r6b1", "r7b1",
+};
+
+static char *sh_reg_names[] = {
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "pc",   "pr",   "gbr",  "vbr",  "mach", "macl", "sr",
+  "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+  "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+};
+
+static char *sh3_reg_names[] = {
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "pc",   "pr",   "gbr",  "vbr",  "mach", "macl", "sr",
+  "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+  "",     "",     "",     "",     "",     "",     "",     "",
+  "ssr",  "spc",
+  "r0b0", "r1b0", "r2b0", "r3b0", "r4b0", "r5b0", "r6b0", "r7b0",
+  "r0b1", "r1b1", "r2b1", "r3b1", "r4b1", "r5b1", "r6b1", "r7b1"
+};
+
+static char *sh3e_reg_names[] = {
+  "r0",   "r1",   "r2",   "r3",   "r4",   "r5",   "r6",   "r7",
+  "r8",   "r9",   "r10",  "r11",  "r12",  "r13",  "r14",  "r15",
+  "pc",   "pr",   "gbr",  "vbr",  "mach", "macl", "sr",
+  "fpul", "fpscr",
+  "fr0",  "fr1",  "fr2",  "fr3",  "fr4",  "fr5",  "fr6",  "fr7",
+  "fr8",  "fr9",  "fr10", "fr11", "fr12", "fr13", "fr14", "fr15",
+  "ssr",  "spc",
+  "r0b0", "r1b0", "r2b0", "r3b0", "r4b0", "r5b0", "r6b0", "r7b0",
+  "r0b1", "r1b1", "r2b1", "r3b1", "r4b1", "r5b1", "r6b1", "r7b1",
+};
+
+char **sh_register_names = sh_generic_reg_names;
+
+
+struct {
+  char **regnames;
+  int mach;
+} sh_processor_type_table[] = {
+  { sh_reg_names, bfd_mach_sh },
+  { sh3_reg_names, bfd_mach_sh3 },
+  { sh3e_reg_names, bfd_mach_sh3e },
+  { NULL, 0 }
+};
+
+/* Prologue looks like
+   [mov.l	<regs>,@-r15]...
+   [sts.l	pr,@-r15]
+   [mov.l	r14,@-r15]
+   [mov		r15,r14]
+*/
+
+#define IS_STS(x)  		((x) == 0x4f22)
+#define IS_PUSH(x) 		(((x) & 0xff0f) == 0x2f06)
+#define GET_PUSHED_REG(x)  	(((x) >> 4) & 0xf)
+#define IS_MOV_SP_FP(x)  	((x) == 0x6ef3)
+#define IS_ADD_SP(x) 		(((x) & 0xff00) == 0x7f00)
+#define IS_MOV_R3(x) 		(((x) & 0xff00) == 0x1a00)
+#define IS_SHLL_R3(x)		((x) == 0x4300)
+#define IS_ADD_R3SP(x)		((x) == 0x3f3c)
+#define IS_FMOV(x)		(((x) & 0xf00f) == 0xf00b)
+#define FPSCR_SZ		(1 << 20)
+
+
+/* Should call_function allocate stack space for a struct return?  */
+int
+sh_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_LENGTH (type) > 1);
+}
+
+
+/* Skip any prologue before the guts of a function */
+
+CORE_ADDR
+sh_skip_prologue (start_pc)
+     CORE_ADDR start_pc;
+{
+  int w;
+
+  w = read_memory_integer (start_pc, 2);
+  while (IS_STS (w)
+	 || IS_FMOV (w)
+	 || IS_PUSH (w)
+	 || IS_MOV_SP_FP (w)
+	 || IS_MOV_R3 (w)
+	 || IS_ADD_R3SP (w)
+	 || IS_ADD_SP (w)
+	 || IS_SHLL_R3 (w))
+    {
+      start_pc += 2;
+      w = read_memory_integer (start_pc, 2);
+    }
+
+  return start_pc;
+}
+
+/* Disassemble an instruction.  */
+
+int
+gdb_print_insn_sh (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    return print_insn_sh (memaddr, info);
+  else
+    return print_insn_shl (memaddr, info);
+}
+
+/* Given a GDB frame, determine the address of the calling function's frame.
+   This will be used to create a new GDB frame struct, and then
+   INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame.
+
+   For us, the frame address is its stack pointer value, so we look up
+   the function prologue to determine the caller's sp value, and return it.  */
+
+CORE_ADDR
+sh_frame_chain (frame)
+     struct frame_info *frame;
+{
+  if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+    return frame->frame;	/* dummy frame same as caller's frame */
+  if (!inside_entry_file (frame->pc))
+    return read_memory_integer (FRAME_FP (frame) + frame->f_offset, 4);
+  else
+    return 0;
+}
+
+/* Find REGNUM on the stack.  Otherwise, it's in an active register.  One thing
+   we might want to do here is to check REGNUM against the clobber mask, and
+   somehow flag it as invalid if it isn't saved on the stack somewhere.  This
+   would provide a graceful failure mode when trying to get the value of
+   caller-saves registers for an inner frame.  */
+
+CORE_ADDR
+sh_find_callers_reg (fi, regnum)
+     struct frame_info *fi;
+     int regnum;
+{
+  struct frame_saved_regs fsr;
+
+  for (; fi; fi = fi->next)
+    if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      /* When the caller requests PR from the dummy frame, we return PC because
+	 that's where the previous routine appears to have done a call from. */
+      return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+    else 
+      {
+	FRAME_FIND_SAVED_REGS(fi, fsr);
+	if (fsr.regs[regnum] != 0)
+	  return read_memory_integer (fsr.regs[regnum], 
+				      REGISTER_RAW_SIZE(regnum));
+      }
+  return read_register (regnum);
+}
+
+/* Put here the code to store, into a struct frame_saved_regs, the
+   addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special: the address we
+   return for it IS the sp for the next frame. */
+
+void
+sh_frame_find_saved_regs (fi, fsr)
+     struct frame_info *fi;
+     struct frame_saved_regs *fsr;
+{
+  int where[NUM_REGS];
+  int rn;
+  int have_fp = 0;
+  int depth;
+  int pc;
+  int opc;
+  int insn;
+  int r3_val = 0;
+  char * dummy_regs = generic_find_dummy_frame (fi->pc, fi->frame);
+
+  if (dummy_regs)
+    {
+      /* DANGER!  This is ONLY going to work if the char buffer format of
+	 the saved registers is byte-for-byte identical to the 
+	 CORE_ADDR regs[NUM_REGS] format used by struct frame_saved_regs! */
+      memcpy (&fsr->regs, dummy_regs, sizeof(fsr));
+      return;
+    }
+
+  opc = pc = get_pc_function_start (fi->pc);
+
+  insn = read_memory_integer (pc, 2);
+
+  fi->leaf_function = 1;
+  fi->f_offset = 0;
+
+  for (rn = 0; rn < NUM_REGS; rn++)
+    where[rn] = -1;
+
+  depth = 0;
+
+  /* Loop around examining the prologue insns until we find something
+     that does not appear to be part of the prologue.  But give up
+     after 20 of them, since we're getting silly then. */
+
+  while (pc < opc + 20 * 2)
+    {
+      /* See where the registers will be saved to */
+      if (IS_PUSH (insn))
+	{
+	  pc += 2;
+	  rn = GET_PUSHED_REG (insn);
+	  where[rn] = depth;
+	  insn = read_memory_integer (pc, 2);
+	  depth += 4;
+	}
+      else if (IS_STS (insn))
+	{
+	  pc += 2;
+	  where[PR_REGNUM] = depth;
+	  insn = read_memory_integer (pc, 2);
+	  /* If we're storing the pr then this isn't a leaf */
+	  fi->leaf_function = 0;
+	  depth += 4;
+	}
+      else if (IS_MOV_R3 (insn))
+	{
+	  r3_val = ((insn & 0xff) ^ 0x80) - 0x80;
+	  pc += 2;
+	  insn = read_memory_integer (pc, 2);
+	}
+      else if (IS_SHLL_R3 (insn))
+	{
+	  r3_val <<= 1;
+	  pc += 2;
+	  insn = read_memory_integer (pc, 2);
+	}
+      else if (IS_ADD_R3SP (insn))
+	{
+	  depth += -r3_val;
+	  pc += 2;
+	  insn = read_memory_integer (pc, 2);
+	}
+      else if (IS_ADD_SP (insn))
+	{
+	  pc += 2;
+	  depth -= ((insn & 0xff) ^ 0x80) - 0x80;
+	  insn = read_memory_integer (pc, 2);
+	}
+      else if (IS_FMOV (insn))
+	{
+	  pc += 2;
+	  insn = read_memory_integer (pc, 2);
+	  if (read_register (FPSCR_REGNUM) & FPSCR_SZ)
+	    {
+	      depth += 8;
+	    }
+	  else
+	    {
+	      depth += 4;
+	    }
+	}
+      else
+	break;
+    }
+
+  /* Now we know how deep things are, we can work out their addresses */
+
+  for (rn = 0; rn < NUM_REGS; rn++)
+    {
+      if (where[rn] >= 0)
+	{
+	  if (rn == FP_REGNUM)
+	    have_fp = 1;
+
+	  fsr->regs[rn] = fi->frame - where[rn] + depth - 4;
+	}
+      else
+	{
+	  fsr->regs[rn] = 0;
+	}
+    }
+
+  if (have_fp)
+    {
+      fsr->regs[SP_REGNUM] = read_memory_integer (fsr->regs[FP_REGNUM], 4);
+    }
+  else
+    {
+      fsr->regs[SP_REGNUM] = fi->frame - 4;
+    }
+
+  fi->f_offset = depth - where[FP_REGNUM] - 4;
+  /* Work out the return pc - either from the saved pr or the pr
+     value */
+}
+
+/* initialize the extra info saved in a FRAME */
+
+void
+sh_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  struct frame_saved_regs fsr;
+
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+    {
+      /* We need to setup fi->frame here because run_stack_dummy gets it wrong
+	 by assuming it's always FP.  */
+      fi->frame     = generic_read_register_dummy (fi->pc, fi->frame, 
+						   SP_REGNUM);
+      fi->return_pc = generic_read_register_dummy (fi->pc, fi->frame, 
+						   PC_REGNUM);
+      fi->f_offset = -(CALL_DUMMY_LENGTH + 4);
+      fi->leaf_function = 0;
+      return;
+    }
+  else
+    {
+      FRAME_FIND_SAVED_REGS (fi, fsr);
+      fi->return_pc = sh_find_callers_reg (fi, PR_REGNUM);
+    }
+}
+
+/* Discard from the stack the innermost frame,
+   restoring all saved registers.  */
+
+void
+sh_pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR fp;
+  register int regnum;
+  struct frame_saved_regs fsr;
+
+  if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+  {
+    fp = FRAME_FP (frame);
+    get_frame_saved_regs (frame, &fsr);
+
+    /* Copy regs from where they were saved in the frame */
+    for (regnum = 0; regnum < NUM_REGS; regnum++)
+      if (fsr.regs[regnum])
+	write_register (regnum, read_memory_integer (fsr.regs[regnum], 4));
+
+    write_register (PC_REGNUM, frame->return_pc);
+    write_register (SP_REGNUM, fp + 4);
+  }
+  flush_cached_frames ();
+}
+
+/* Function: push_arguments
+   Setup the function arguments for calling a function in the inferior.
+
+   On the Hitachi SH architecture, there are four registers (R4 to R7)
+   which are dedicated for passing function arguments.  Up to the first
+   four arguments (depending on size) may go into these registers.
+   The rest go on the stack.
+
+   Arguments that are smaller than 4 bytes will still take up a whole
+   register or a whole 32-bit word on the stack, and will be 
+   right-justified in the register or the stack word.  This includes
+   chars, shorts, and small aggregate types.
+
+   Arguments that are larger than 4 bytes may be split between two or 
+   more registers.  If there are not enough registers free, an argument
+   may be passed partly in a register (or registers), and partly on the
+   stack.  This includes doubles, long longs, and larger aggregates. 
+   As far as I know, there is no upper limit to the size of aggregates 
+   that will be passed in this way; in other words, the convention of 
+   passing a pointer to a large aggregate instead of a copy is not used.
+
+   An exceptional case exists for struct arguments (and possibly other
+   aggregates such as arrays) if the size is larger than 4 bytes but 
+   not a multiple of 4 bytes.  In this case the argument is never split 
+   between the registers and the stack, but instead is copied in its
+   entirety onto the stack, AND also copied into as many registers as 
+   there is room for.  In other words, space in registers permitting, 
+   two copies of the same argument are passed in.  As far as I can tell,
+   only the one on the stack is used, although that may be a function 
+   of the level of compiler optimization.  I suspect this is a compiler
+   bug.  Arguments of these odd sizes are left-justified within the 
+   word (as opposed to arguments smaller than 4 bytes, which are 
+   right-justified).
+ 
+
+   If the function is to return an aggregate type such as a struct, it 
+   is either returned in the normal return value register R0 (if its 
+   size is no greater than one byte), or else the caller must allocate
+   space into which the callee will copy the return value (if the size
+   is greater than one byte).  In this case, a pointer to the return 
+   value location is passed into the callee in register R2, which does 
+   not displace any of the other arguments passed in via registers R4
+   to R7.   */
+
+CORE_ADDR
+sh_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int stack_offset, stack_alloc;
+  int argreg;
+  int argnum;
+  struct type *type;
+  CORE_ADDR regval;
+  char *val;
+  char valbuf[4];
+  int len;
+  int odd_sized_struct;
+
+  /* first force sp to a 4-byte alignment */
+  sp = sp & ~3;
+
+  /* The "struct return pointer" pseudo-argument has its own dedicated 
+     register */
+  if (struct_return)
+      write_register (STRUCT_RETURN_REGNUM, struct_addr);
+
+  /* Now make sure there's space on the stack */
+  for (argnum = 0, stack_alloc = 0;
+       argnum < nargs; argnum++)
+    stack_alloc += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + 3) & ~3);
+  sp -= stack_alloc;    /* make room on stack for args */
+
+
+  /* Now load as many as possible of the first arguments into
+     registers, and push the rest onto the stack.  There are 16 bytes
+     in four registers available.  Loop thru args from first to last.  */
+
+  argreg = ARG0_REGNUM;
+  for (argnum = 0, stack_offset = 0; argnum < nargs; argnum++)
+    {
+      type = VALUE_TYPE (args[argnum]);
+      len  = TYPE_LENGTH (type);
+      memset(valbuf, 0, sizeof(valbuf));
+      if (len < 4)
+        { /* value gets right-justified in the register or stack word */
+          memcpy(valbuf + (4 - len), 
+		 (char *) VALUE_CONTENTS (args[argnum]), len);
+          val = valbuf;
+        }
+      else
+        val = (char *) VALUE_CONTENTS (args[argnum]);
+
+      if (len > 4 && (len & 3) != 0)
+	odd_sized_struct = 1;		/* such structs go entirely on stack */
+      else 
+	odd_sized_struct = 0;
+      while (len > 0)
+	{
+	  if (argreg > ARGLAST_REGNUM || odd_sized_struct)
+	    {				/* must go on the stack */
+	      write_memory (sp + stack_offset, val, 4);
+	      stack_offset += 4;
+	    }
+	  /* NOTE WELL!!!!!  This is not an "else if" clause!!!
+	     That's because some *&^%$ things get passed on the stack
+	     AND in the registers!   */
+	  if (argreg <= ARGLAST_REGNUM)
+	    {				/* there's room in a register */
+	      regval = extract_address (val, REGISTER_RAW_SIZE(argreg));
+	      write_register (argreg++, regval);
+	    }
+	  /* Store the value 4 bytes at a time.  This means that things
+	     larger than 4 bytes may go partly in registers and partly
+	     on the stack.  */
+	  len -= REGISTER_RAW_SIZE(argreg);
+	  val += REGISTER_RAW_SIZE(argreg);
+	}
+    }
+  return sp;
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Needed for targets where we don't actually execute a JSR/BSR instruction */
+
+CORE_ADDR
+sh_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  write_register (PR_REGNUM, CALL_DUMMY_ADDRESS ());
+  return sp;
+}
+
+/* Function: fix_call_dummy
+   Poke the callee function's address into the destination part of 
+   the CALL_DUMMY.  The address is actually stored in a data word 
+   following the actualy CALL_DUMMY instructions, which will load
+   it into a register using PC-relative addressing.  This function
+   expects the CALL_DUMMY to look like this:
+
+        mov.w @(2,PC), R8
+        jsr   @R8
+        nop
+        trap
+        <destination>
+  */
+
+#if 0
+void
+sh_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p)
+     char *dummy;
+     CORE_ADDR pc;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  *(unsigned long *) (dummy + 8) = fun;
+}
+#endif
+
+/* Function: get_saved_register
+   Just call the generic_get_saved_register function.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+
+/* Modify the actual processor type. */
+
+int
+sh_target_architecture_hook (ap)
+     const bfd_arch_info_type *ap;
+{
+  int i, j;
+
+  if (ap->arch != bfd_arch_sh)
+    return 0;
+
+  for (i = 0; sh_processor_type_table[i].regnames != NULL; i++)
+    {
+      if (sh_processor_type_table[i].mach == ap->mach)
+	{
+	  sh_register_names = sh_processor_type_table[i].regnames;
+	  return 1;
+	}
+    }
+
+  fatal ("Architecture `%s' unreconized", ap->printable_name);
+}
+
+/* Print the registers in a form similar to the E7000 */
+
+static void
+sh_show_regs (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int cpu;
+  if (TARGET_ARCHITECTURE->arch == bfd_arch_sh)
+    cpu = TARGET_ARCHITECTURE->mach;
+  else
+    cpu = 0;
+
+  printf_filtered ("PC=%08x SR=%08x PR=%08x MACH=%08x MACHL=%08x\n",
+		   read_register (PC_REGNUM),
+		   read_register (SR_REGNUM),
+		   read_register (PR_REGNUM),
+		   read_register (MACH_REGNUM),
+		   read_register (MACL_REGNUM));
+
+  printf_filtered ("GBR=%08x VBR=%08x",
+                   read_register (GBR_REGNUM),
+                   read_register (VBR_REGNUM));
+  if (cpu == bfd_mach_sh3 || cpu == bfd_mach_sh3e)
+    {
+      printf_filtered (" SSR=%08x SPC=%08x",
+                       read_register (SSR_REGNUM),
+                       read_register (SPC_REGNUM));
+      if (cpu == bfd_mach_sh3e)
+        {
+          printf_filtered (" FPUL=%08x FPSCR=%08x",
+                           read_register (FPUL_REGNUM),
+                           read_register (FPSCR_REGNUM));
+        }
+    }
+
+  printf_filtered ("\nR0-R7  %08x %08x %08x %08x %08x %08x %08x %08x\n",
+		   read_register (0),
+		   read_register (1),
+		   read_register (2),
+		   read_register (3),
+		   read_register (4),
+		   read_register (5),
+		   read_register (6),
+		   read_register (7));
+  printf_filtered ("R8-R15 %08x %08x %08x %08x %08x %08x %08x %08x\n",
+		   read_register (8),
+		   read_register (9),
+		   read_register (10),
+		   read_register (11),
+		   read_register (12),
+		   read_register (13),
+		   read_register (14),
+		   read_register (15));
+  if (cpu == bfd_mach_sh3e)
+    {
+      printf_filtered ("FP0-FP7  %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                       read_register (FP0_REGNUM + 0),
+                       read_register (FP0_REGNUM + 1),
+                       read_register (FP0_REGNUM + 2),
+                       read_register (FP0_REGNUM + 3),
+                       read_register (FP0_REGNUM + 4),
+                       read_register (FP0_REGNUM + 5),
+                       read_register (FP0_REGNUM + 6),
+                       read_register (FP0_REGNUM + 7));
+      printf_filtered ("FP8-FP15 %08x %08x %08x %08x %08x %08x %08x %08x\n",
+                       read_register (FP0_REGNUM + 8),
+                       read_register (FP0_REGNUM + 9),
+                       read_register (FP0_REGNUM + 10),
+                       read_register (FP0_REGNUM + 11),
+                       read_register (FP0_REGNUM + 12),
+                       read_register (FP0_REGNUM + 13),
+                       read_register (FP0_REGNUM + 14),
+                       read_register (FP0_REGNUM + 15));
+    }
+}
+
+/* Function: extract_return_value
+   Find a function's return value in the appropriate registers (in regbuf),
+   and copy it into valbuf.  */
+
+void
+sh_extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     void *regbuf;
+     void *valbuf;
+{
+  int len = TYPE_LENGTH(type);
+
+  if (len <= 4)
+    memcpy (valbuf, ((char *) regbuf) + 4 - len, len);
+  else if (len <= 8)
+    memcpy (valbuf, ((char *) regbuf) + 8 - len, len);
+  else
+    error ("bad size for return value");
+}
+
+void
+_initialize_sh_tdep ()
+{
+  struct cmd_list_element *c;
+
+  tm_print_insn = gdb_print_insn_sh;
+
+  target_architecture_hook = sh_target_architecture_hook;
+
+  add_com ("regs", class_vars, sh_show_regs, "Print all registers");
+}
diff --git a/gdb/sh3-rom.c b/gdb/sh3-rom.c
new file mode 100644
index 0000000..ab4aa69
--- /dev/null
+++ b/gdb/sh3-rom.c
@@ -0,0 +1,392 @@
+/* Remote target glue for the Hitachi SH-3 ROM monitor.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "srec.h"
+
+static serial_t parallel;
+static int parallel_in_use;
+
+static void sh3_open PARAMS ((char *args, int from_tty));
+
+static void
+sh3_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int numregs;
+  int regno;
+
+  numregs = 1;
+  regno = -1;
+
+  if (regnamelen == 2)
+    {
+      switch (regname[0])
+	{
+	case 'S':
+	  if (regname[1] == 'R')
+	    regno = SR_REGNUM;
+	  break;
+	case 'P':
+	  if (regname[1] == 'C')
+	    regno = PC_REGNUM;
+	  else if (regname[1] == 'R')
+	    regno = PR_REGNUM;
+	  break;
+	}
+    }
+  else if (regnamelen == 3)
+    {
+      switch (regname[0])
+	{
+	case 'G':
+	case 'V':
+	  if (regname[1] == 'B' && regname[2] == 'R')
+	    if (regname[0] == 'G')
+	      regno = VBR_REGNUM;
+	    else
+	      regno = GBR_REGNUM;
+	  break;
+	case 'S':
+	  if (regname[1] == 'S' && regname[2] == 'R')
+	    regno = SSR_REGNUM;
+	  else if (regname[1] == 'P' && regname[2] == 'C')
+	    regno = SPC_REGNUM;
+	  break;
+	}
+    }
+  else if (regnamelen == 4)
+    {
+      switch (regname[0])
+	{
+	case 'M':
+	  if (regname[1] == 'A' && regname[2] == 'C')
+	    if (regname[3] == 'H')
+	      regno = MACH_REGNUM;
+	    else if (regname[3] == 'L')
+	      regno = MACL_REGNUM;
+	  break;
+	case 'R':
+	  if (regname[1] == '0' && regname[2] == '-' && regname[3] == '7')
+	    {
+	      regno = R0_REGNUM;
+	      numregs = 8;
+	    }
+	}
+    }
+  else if (regnamelen == 5)
+    {
+      if (regname[1] == '8' && regname[2] == '-' && regname[3] == '1'
+	  && regname[4] =='5')
+	{
+	  regno = R0_REGNUM + 8;
+	  numregs = 8;
+	}
+    }
+  else if (regnamelen == 17)
+    {
+    }
+
+  if (regno >= 0)
+    while (numregs-- > 0)
+      val = monitor_supply_register (regno++, val);
+}
+
+static void
+sh3_load (desc, file, hashmark)
+     serial_t desc;
+     char *file;
+     int hashmark;
+{
+  if (parallel_in_use) 
+    {
+      monitor_printf("pl;s\r");
+      load_srec (parallel, file, 0, 80, SREC_ALL, hashmark, NULL);
+      monitor_expect_prompt (NULL, 0);
+    }
+  else 
+    {
+      monitor_printf ("il;s:x\r");
+      monitor_expect ("\005", NULL, 0); /* Look for ENQ */
+      SERIAL_WRITE (desc, "\006", 1); /* Send ACK */
+      monitor_expect ("LO x\r", NULL, 0); /* Look for filename */
+
+      load_srec (desc, file, 0, 80, SREC_ALL, hashmark, NULL);
+
+      monitor_expect ("\005", NULL, 0); /* Look for ENQ */
+      SERIAL_WRITE (desc, "\006", 1); /* Send ACK */
+      monitor_expect_prompt (NULL, 0);
+    }
+}
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+static char *sh3_regnames[NUM_REGS] = {
+  "R0", "R1", "R2",  "R3", "R4",  "R5",   "R6",  "R7",
+  "R8", "R9", "R10", "R11","R12", "R13",  "R14", "R15",
+  "PC", "PR", "GBR", "VBR","MACH","MACL", "SR",
+  NULL, NULL,
+  NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+  NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+  "SSR", "SPC",
+  "R0_BANK0", "R1_BANK0", "R2_BANK0", "R3_BANK0",
+  "R4_BANK0", "R5_BANK0", "R6_BANK0", "R7_BANK0",
+  "R0_BANK1", "R1_BANK1", "R2_BANK1", "R3_BANK1",
+  "R4_BANK1", "R5_BANK1", "R6_BANK1", "R7_BANK1"
+};
+
+static char *sh3e_regnames[NUM_REGS] = {
+  "R0", "R1", "R2",  "R3", "R4",  "R5",   "R6",  "R7",
+  "R8", "R9", "R10", "R11","R12", "R13",  "R14", "R15",
+  "PC", "PR", "GBR", "VBR","MACH","MACL", "SR",
+  "FPUL", "FPSCR",
+  "FR0", "FR1", "FR2", "FR3", "FR4", "FR5", "FR6", "FR7",
+  "FR8", "FR9", "FR10", "FR11", "FR12", "FR13", "FR14", "FR15",
+  "SSR","SPC",
+  "R0_BANK0", "R1_BANK0", "R2_BANK0", "R3_BANK0",
+  "R4_BANK0", "R5_BANK0", "R6_BANK0", "R7_BANK0",
+  "R0_BANK1", "R1_BANK1", "R2_BANK1", "R3_BANK1",
+  "R4_BANK1", "R5_BANK1", "R6_BANK1", "R7_BANK1"
+};
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+static struct target_ops sh3_ops, sh3e_ops;
+
+static char *sh3_inits[] = {"\003", NULL}; /* Exits sub-command mode & download cmds */
+
+static struct monitor_ops sh3_cmds ;
+
+static void 
+init_sh3_cmds(void)
+{
+  sh3_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_GETMEM_READ_SINGLE ;	/* flags */
+  sh3_cmds.init =   sh3_inits;		/* monitor init string */
+  sh3_cmds.cont =   "g\r";		/* continue command */
+  sh3_cmds.step =   "s\r";		/* single step */
+  sh3_cmds.stop =   "\003";		/* Interrupt program */
+  sh3_cmds.set_break =   "b %x\r";	/* set a breakpoint */
+  sh3_cmds.clr_break =   "b -%x\r";	/* clear a breakpoint */
+  sh3_cmds.clr_all_break =   "b -\r";	/* clear all breakpoints */
+  sh3_cmds.fill =   "f %x @%x %x\r";		/* fill (start len val) */
+  sh3_cmds.setmem.cmdb =     "m %x %x\r";	/* setmem.cmdb (addr, value) */
+  sh3_cmds.setmem.cmdw =     "m %x %x;w\r";	/* setmem.cmdw (addr, value) */
+  sh3_cmds.setmem.cmdl =     "m %x %x;l\r";	/* setmem.cmdl (addr, value) */
+  sh3_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  sh3_cmds.setmem.resp_delim =     NULL;	/* setreg.resp_delim */
+  sh3_cmds.setmem.term =     NULL;		/* setreg.term */
+  sh3_cmds.setmem.term_cmd =     NULL;		/* setreg.term_cmd */
+  sh3_cmds.getmem.cmdb =     "m %x\r";		/* getmem.cmdb (addr, len) */
+  sh3_cmds.getmem.cmdw =     "m %x;w\r";	/* getmem.cmdw (addr, len) */
+  sh3_cmds.getmem.cmdl =     "m %x;l\r";	/* getmem.cmdl (addr, len) */
+  sh3_cmds.getmem.cmdll =     NULL;		/* getmem.cmdll (addr, len) */
+  sh3_cmds.getmem.resp_delim =     "^ [0-9A-F]+ "; /* getmem.resp_delim */
+  sh3_cmds.getmem.term =     "? ";		/* getmem.term */
+  sh3_cmds.getmem.term_cmd =     ".\r";		/* getmem.term_cmd */
+  sh3_cmds.setreg.cmd =     ".%s %x\r";		/* setreg.cmd (name, value) */
+  sh3_cmds.setreg.resp_delim =     NULL;	/* setreg.resp_delim */
+  sh3_cmds.setreg.term =     NULL;		/* setreg.term */
+  sh3_cmds.setreg.term_cmd =     NULL;		/* setreg.term_cmd */
+  sh3_cmds.getreg.cmd =     ".%s\r";		/* getreg.cmd (name) */
+  sh3_cmds.getreg.resp_delim =     "=";		/* getreg.resp_delim */
+  sh3_cmds.getreg.term =     "? ";		/* getreg.term */
+  sh3_cmds.getreg.term_cmd =     ".\r"	;	/* getreg.term_cmd */
+  sh3_cmds.dump_registers =   "r\r";		/* dump_registers */
+  sh3_cmds.register_pattern = 	"\\(\\w+\\)=\\([0-9a-fA-F]+\\( +[0-9a-fA-F]+\\b\\)*\\)";
+  sh3_cmds.supply_register =  sh3_supply_register ;	/* supply_register */
+  sh3_cmds.load_routine =   sh3_load;		/* load_routine */
+  sh3_cmds.load =   NULL;			/* download command */
+  sh3_cmds.loadresp =   NULL;			/* Load response */
+  sh3_cmds.prompt =   "\n:";			/* monitor command prompt */
+  sh3_cmds.line_term =   "\r";			/* end-of-line terminator */
+  sh3_cmds.cmd_end =   ".\r";			/* optional command terminator */
+  sh3_cmds.target =   &sh3_ops;			/* target operations */
+  sh3_cmds.stopbits =   SERIAL_1_STOPBITS;	/* number of stop bits */
+  sh3_cmds.regnames =   sh3_regnames;		/* registers names */
+  sh3_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_sh3_cmds */
+
+/* This monitor structure is identical except for a couple slots, so
+   we will fill it in from the base structure when needed.  */
+
+static struct monitor_ops sh3e_cmds;
+
+static void
+sh3_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *serial_port_name = args;
+  char *parallel_port_name = 0;
+
+  if (args) 
+    {
+      char *cursor = serial_port_name = strsave (args);
+
+      while (*cursor && *cursor != ' ')
+ 	cursor++;
+
+      if (*cursor)
+	*cursor++ = 0;
+
+      while (*cursor == ' ')
+	cursor++;
+
+      if (*cursor)
+	parallel_port_name = cursor;
+    }
+
+  monitor_open (serial_port_name, &sh3_cmds, from_tty);
+
+  if (parallel_port_name)
+    {
+      parallel = SERIAL_OPEN (parallel_port_name);
+
+      if (!parallel)
+	perror_with_name ("Unable to open parallel port.");
+
+      parallel_in_use = 1;
+    }
+
+  /* If we connected successfully, we know the processor is an SH3.  */
+  set_architecture_from_arch_mach (bfd_arch_sh, bfd_mach_sh3);
+}
+
+
+static void
+sh3e_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *serial_port_name = args;
+  char *parallel_port_name = 0;
+
+  if (args) 
+    {
+      char *cursor = serial_port_name = strsave (args);
+
+      while (*cursor && *cursor != ' ')
+ 	cursor++;
+
+      if (*cursor)
+	*cursor++ = 0;
+
+      while (*cursor == ' ')
+	cursor++;
+
+      if (*cursor)
+	parallel_port_name = cursor;
+    }
+
+  /* Set up the SH-3E monitor commands structure.  */
+
+  memcpy (&sh3e_cmds, &sh3_cmds, sizeof (struct monitor_ops));
+
+  sh3e_cmds.target = &sh3e_ops;
+  sh3e_cmds.regnames = sh3e_regnames;
+
+  monitor_open (serial_port_name, &sh3e_cmds, from_tty);
+
+  if (parallel_port_name)
+    {
+      parallel = SERIAL_OPEN (parallel_port_name);
+
+      if (!parallel)
+	perror_with_name ("Unable to open parallel port.");
+
+      parallel_in_use = 1;
+    }
+
+  /* If we connected successfully, we know the processor is an SH3E.  */
+  set_architecture_from_arch_mach (bfd_arch_sh, bfd_mach_sh3);
+}
+
+static void
+sh3_close (quitting)
+     int quitting;
+{
+  monitor_close (quitting);
+  if (parallel_in_use) {
+    SERIAL_CLOSE (parallel);
+    parallel_in_use = 0;
+  }
+}
+
+void
+_initialize_sh3_rom ()
+{
+  init_sh3_cmds() ;
+  init_monitor_ops (&sh3_ops);
+
+  sh3_ops.to_shortname = "sh3";
+  sh3_ops.to_longname = "Hitachi SH-3 rom monitor";
+
+  sh3_ops.to_doc = 
+#ifdef _WINDOWS
+  /* On windows we can talk through the parallel port too. */
+    "Debug on a Hitachi eval board running the SH-3 rom monitor.\n"
+    "Specify the serial device it is connected to (e.g. com2).\n"
+    "If you want to use the parallel port to download to it, specify that\n"
+    "as the second argument. (e.g. lpt1)";
+#else
+    "Debug on a Hitachi eval board running the SH-3 rom monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+#endif
+
+  sh3_ops.to_open = sh3_open;
+  sh3_ops.to_close = sh3_close;
+
+  add_target (&sh3_ops);
+
+  /* Setup the SH3e, which has float registers.  */
+
+  init_monitor_ops (&sh3e_ops);
+
+  sh3e_ops.to_shortname = "sh3e";
+  sh3e_ops.to_longname = "Hitachi SH-3E rom monitor";
+
+  sh3e_ops.to_doc = 
+#ifdef _WINDOWS
+  /* On windows we can talk through the parallel port too. */
+    "Debug on a Hitachi eval board running the SH-3E rom monitor.\n"
+    "Specify the serial device it is connected to (e.g. com2).\n"
+    "If you want to use the parallel port to download to it, specify that\n"
+    "as the second argument. (e.g. lpt1)";
+#else
+    "Debug on a Hitachi eval board running the SH-3E rom monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+#endif
+
+  sh3e_ops.to_open = sh3e_open;
+  sh3e_ops.to_close = sh3_close;
+
+  add_target (&sh3e_ops);
+}
diff --git a/gdb/signals.h b/gdb/signals.h
new file mode 100644
index 0000000..a1348b6
--- /dev/null
+++ b/gdb/signals.h
@@ -0,0 +1,27 @@
+/* Signal handler definitions for GDB, the GNU Debugger.
+   Copyright (C) 1986, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+/*  This file is almost the same as including <signal.h> except that it
+    eliminates certain signal names when job control is not supported,
+    (or, on some systems, when job control is there but doesn't work
+    the way GDB expects it to work).  */
+/* This has been superceded by the job_control variable in serial.h.  */
+
+#include <signal.h>
diff --git a/gdb/sol-thread.c b/gdb/sol-thread.c
new file mode 100644
index 0000000..3fe6268
--- /dev/null
+++ b/gdb/sol-thread.c
@@ -0,0 +1,1673 @@
+/* Low level interface for debugging Solaris threads for GDB, the GNU debugger.
+   Copyright 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* This module implements a sort of half target that sits between the
+   machine-independent parts of GDB and the /proc interface (procfs.c) to
+   provide access to the Solaris user-mode thread implementation.
+
+   Solaris threads are true user-mode threads, which are invoked via the thr_*
+   and pthread_* (native and Posix respectivly) interfaces.  These are mostly
+   implemented in user-space, with all thread context kept in various
+   structures that live in the user's heap.  These should not be confused with
+   lightweight processes (LWPs), which are implemented by the kernel, and
+   scheduled without explicit intervention by the process.
+
+   Just to confuse things a little, Solaris threads (both native and Posix) are
+   actually implemented using LWPs.  In general, there are going to be more
+   threads than LWPs.  There is no fixed correspondence between a thread and an
+   LWP.  When a thread wants to run, it gets scheduled onto the first available
+   LWP and can therefore migrate from one LWP to another as time goes on.  A
+   sleeping thread may not be associated with an LWP at all!
+
+   To make it possible to mess with threads, Sun provides a library called
+   libthread_db.so.1 (not to be confused with libthread_db.so.0, which doesn't
+   have a published interface).  This interface has an upper part, which it
+   provides, and a lower part which I provide.  The upper part consists of the
+   td_* routines, which allow me to find all the threads, query their state,
+   etc...  The lower part consists of all of the ps_*, which are used by the
+   td_* routines to read/write memory, manipulate LWPs, lookup symbols, etc...
+   The ps_* routines actually do most of their work by calling functions in
+   procfs.c.  */
+
+#include "defs.h"
+#include <thread.h>
+#include <proc_service.h>
+#include <thread_db.h>
+#include "gdbthread.h"
+#include "target.h"
+#include "inferior.h"
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <dlfcn.h>
+#include "gdbcmd.h"
+
+extern struct target_ops sol_thread_ops; /* Forward declaration */
+extern struct target_ops sol_core_ops; /* Forward declaration */
+
+/* place to store core_ops before we overwrite it */
+static struct target_ops orig_core_ops;
+
+struct target_ops sol_thread_ops;
+struct target_ops sol_core_ops;
+
+extern int procfs_suppress_run;
+extern struct target_ops procfs_ops; /* target vector for procfs.c */
+extern struct target_ops core_ops; /* target vector for corelow.c */
+extern char *procfs_pid_to_str PARAMS ((int pid));
+
+/* Note that these prototypes differ slightly from those used in procfs.c
+   for of two reasons.  One, we can't use gregset_t, as that's got a whole
+   different meaning under Solaris (also, see above).  Two, we can't use the
+   pointer form here as these are actually arrays of ints (for Sparc's at
+   least), and are automatically coerced into pointers to ints when used as
+   parameters.  That makes it impossible to avoid a compiler warning when
+   passing pr{g fp}regset_t's from a parameter to an argument of one of
+   these functions.  */
+
+extern void supply_gregset PARAMS ((const prgregset_t));
+extern void fill_gregset PARAMS ((prgregset_t, int));
+extern void supply_fpregset PARAMS ((const prfpregset_t *));
+extern void fill_fpregset PARAMS ((prfpregset_t *, int));
+
+/* This struct is defined by us, but mainly used for the proc_service interface.
+   We don't have much use for it, except as a handy place to get a real pid
+   for memory accesses.  */
+
+struct ps_prochandle
+{
+  pid_t pid;
+};
+
+struct string_map
+{
+  int num;
+  char *str;
+};
+
+static struct ps_prochandle main_ph;
+static td_thragent_t *main_ta;
+static int sol_thread_active = 0;
+
+static struct cleanup * save_inferior_pid PARAMS ((void));
+static void restore_inferior_pid PARAMS ((int pid));
+static char *td_err_string PARAMS ((td_err_e errcode));
+static char *td_state_string PARAMS ((td_thr_state_e statecode));
+static int  thread_to_lwp PARAMS ((int thread_id, int default_lwp));
+static void sol_thread_resume PARAMS ((int pid, int step,
+				       enum target_signal signo));
+static int lwp_to_thread PARAMS ((int lwp));
+static int sol_thread_alive PARAMS ((int pid));
+static void sol_core_close PARAMS ((int quitting));
+
+static void init_sol_thread_ops PARAMS ((void));
+static void init_sol_core_ops PARAMS ((void));
+
+#define THREAD_FLAG 0x80000000
+#define is_thread(ARG) (((ARG) & THREAD_FLAG) != 0)
+#define is_lwp(ARG) (((ARG) & THREAD_FLAG) == 0)
+#define GET_LWP(LWP_ID) (TIDGET(LWP_ID))
+#define GET_THREAD(THREAD_ID) (((THREAD_ID) >> 16) & 0x7fff)
+#define BUILD_LWP(LWP_ID, PID) ((LWP_ID) << 16 | (PID))
+#define BUILD_THREAD(THREAD_ID, PID) (THREAD_FLAG | BUILD_LWP (THREAD_ID, PID))
+
+/* Pointers to routines from lithread_db resolved by dlopen() */
+
+static void
+  (*p_td_log) (const int on_off);
+static td_err_e
+  (*p_td_ta_new) (const struct ps_prochandle *ph_p, td_thragent_t **ta_pp);
+static td_err_e
+  (*p_td_ta_delete) (td_thragent_t *ta_p);
+static td_err_e
+  (*p_td_init) (void);
+static td_err_e
+  (*p_td_ta_get_ph) (const td_thragent_t *ta_p, struct ps_prochandle **ph_pp);
+static td_err_e
+  (*p_td_ta_get_nthreads) (const td_thragent_t *ta_p, int *nthread_p);
+static td_err_e
+  (*p_td_ta_tsd_iter) (const td_thragent_t *ta_p, td_key_iter_f *cb, void *cbdata_p);
+static td_err_e
+  (*p_td_ta_thr_iter) (const td_thragent_t *ta_p, td_thr_iter_f *cb, void *cbdata_p, td_thr_state_e state,
+		       int ti_pri, sigset_t *ti_sigmask_p, unsigned ti_user_flags);
+static td_err_e
+  (*p_td_thr_validate) (const td_thrhandle_t *th_p);
+static td_err_e
+  (*p_td_thr_tsd) (const td_thrhandle_t *th_p, const thread_key_t key, void **data_pp);
+static td_err_e
+  (*p_td_thr_get_info) (const td_thrhandle_t *th_p, td_thrinfo_t *ti_p);
+static td_err_e
+  (*p_td_thr_getfpregs) (const td_thrhandle_t *th_p, prfpregset_t *fpregset);
+static td_err_e
+  (*p_td_thr_getxregsize) (const td_thrhandle_t *th_p, int *xregsize);
+static td_err_e
+  (*p_td_thr_getxregs) (const td_thrhandle_t *th_p, const caddr_t xregset);
+static td_err_e
+  (*p_td_thr_sigsetmask) (const td_thrhandle_t *th_p, const sigset_t ti_sigmask);
+static td_err_e
+  (*p_td_thr_setprio) (const td_thrhandle_t *th_p, const int ti_pri);
+static td_err_e
+  (*p_td_thr_setsigpending) (const td_thrhandle_t *th_p, const uchar_t ti_pending_flag, const sigset_t ti_pending);
+static td_err_e
+  (*p_td_thr_setfpregs) (const td_thrhandle_t *th_p, const prfpregset_t *fpregset);
+static td_err_e
+  (*p_td_thr_setxregs) (const td_thrhandle_t *th_p, const caddr_t xregset);
+static td_err_e
+  (*p_td_ta_map_id2thr) (const td_thragent_t *ta_p, thread_t tid, td_thrhandle_t *th_p);
+static td_err_e
+  (*p_td_ta_map_lwp2thr) (const td_thragent_t *ta_p, lwpid_t lwpid, td_thrhandle_t *th_p);
+static td_err_e
+  (*p_td_thr_getgregs) (const td_thrhandle_t *th_p, prgregset_t regset);
+static td_err_e
+  (*p_td_thr_setgregs) (const td_thrhandle_t *th_p, const prgregset_t regset);
+
+/*
+
+LOCAL FUNCTION
+
+	td_err_string - Convert a thread_db error code to a string
+
+SYNOPSIS
+
+	char * td_err_string (errcode)
+
+DESCRIPTION
+
+	Return the thread_db error string associated with errcode.  If errcode
+	is unknown, then return a message.
+
+ */
+
+static char *
+td_err_string (errcode)
+     td_err_e errcode;
+{
+  static struct string_map
+    td_err_table[] = {
+      {TD_OK,		"generic \"call succeeded\""},
+      {TD_ERR,		"generic error."},
+      {TD_NOTHR,	"no thread can be found to satisfy query"},
+      {TD_NOSV,		"no synch. variable can be found to satisfy query"},
+      {TD_NOLWP,	"no lwp can be found to satisfy query"},
+      {TD_BADPH,	"invalid process handle"},
+      {TD_BADTH,	"invalid thread handle"},
+      {TD_BADSH,	"invalid synchronization handle"},
+      {TD_BADTA,	"invalid thread agent"},
+      {TD_BADKEY,	"invalid key"},
+      {TD_NOMSG,	"td_thr_event_getmsg() called when there was no message"},
+      {TD_NOFPREGS,	"FPU register set not available for given thread"},
+      {TD_NOLIBTHREAD,	"application not linked with libthread"},
+      {TD_NOEVENT,	"requested event is not supported"},
+      {TD_NOCAPAB,	"capability not available"},
+      {TD_DBERR,	"Debugger service failed"},
+      {TD_NOAPLIC,	"Operation not applicable to"},
+      {TD_NOTSD,	"No thread specific data for this thread"},
+      {TD_MALLOC,	"Malloc failed"},
+      {TD_PARTIALREG,	"Only part of register set was writen/read"},
+      {TD_NOXREGS,	"X register set not available for given thread"}
+    };
+  const int td_err_size = sizeof td_err_table / sizeof (struct string_map);
+  int i;
+  static char buf[50];
+
+  for (i = 0; i < td_err_size; i++)
+    if (td_err_table[i].num == errcode)
+      return td_err_table[i].str;
+		  
+  sprintf (buf, "Unknown thread_db error code: %d", errcode);
+
+  return buf;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	td_state_string - Convert a thread_db state code to a string
+
+SYNOPSIS
+
+	char * td_state_string (statecode)
+
+DESCRIPTION
+
+	Return the thread_db state string associated with statecode.  If
+	statecode is unknown, then return a message.
+
+ */
+
+static char *
+td_state_string (statecode)
+     td_thr_state_e statecode;
+{
+  static struct string_map
+    td_thr_state_table[] = {
+      {TD_THR_ANY_STATE, "any state"},
+      {TD_THR_UNKNOWN,	"unknown"},
+      {TD_THR_STOPPED,	"stopped"},
+      {TD_THR_RUN,	"run"},
+      {TD_THR_ACTIVE,	"active"},
+      {TD_THR_ZOMBIE,	"zombie"},
+      {TD_THR_SLEEP,	"sleep"},
+      {TD_THR_STOPPED_ASLEEP, "stopped asleep"}
+    };
+  const int td_thr_state_table_size = sizeof td_thr_state_table / sizeof (struct string_map);
+  int i;
+  static char buf[50];
+
+  for (i = 0; i < td_thr_state_table_size; i++)
+    if (td_thr_state_table[i].num == statecode)
+      return td_thr_state_table[i].str;
+		  
+  sprintf (buf, "Unknown thread_db state code: %d", statecode);
+
+  return buf;
+}
+
+/*
+
+LOCAL FUNCTION
+
+	thread_to_lwp - Convert a Posix or Solaris thread id to a LWP id.
+
+SYNOPSIS
+
+	int thread_to_lwp (thread_id, default_lwp)
+
+DESCRIPTION
+
+	This function converts a Posix or Solaris thread id to a lightweight
+	process id.  If thread_id is non-existent, that's an error.  If it's
+	an inactive thread, then we return default_lwp.
+
+NOTES
+
+	This function probably shouldn't call error()...
+
+ */
+
+static int
+thread_to_lwp (thread_id, default_lwp)
+     int thread_id;
+     int default_lwp;
+{
+  td_thrinfo_t ti;
+  td_thrhandle_t th;
+  td_err_e val;
+
+  if (is_lwp (thread_id))
+    return thread_id;			/* It's already an LWP id */
+
+  /* It's a thread.  Convert to lwp */
+
+  val = p_td_ta_map_id2thr (main_ta, GET_THREAD (thread_id), &th);
+  if (val == TD_NOTHR)
+    return -1;		/* thread must have terminated */
+  else if (val != TD_OK)
+    error ("thread_to_lwp: td_ta_map_id2thr %s", td_err_string (val));
+
+  val = p_td_thr_get_info (&th, &ti);
+  if (val == TD_NOTHR)
+    return -1;		/* thread must have terminated */
+  else if (val != TD_OK)
+    error ("thread_to_lwp: td_thr_get_info: %s", td_err_string (val));
+
+  if (ti.ti_state != TD_THR_ACTIVE)
+    {
+      if (default_lwp != -1)
+	return default_lwp;
+      error ("thread_to_lwp: thread state not active: %s",
+	     td_state_string (ti.ti_state));
+    }
+
+  return BUILD_LWP (ti.ti_lid, PIDGET (thread_id));
+}
+
+/*
+
+LOCAL FUNCTION
+
+	lwp_to_thread - Convert a LWP id to a Posix or Solaris thread id.
+
+SYNOPSIS
+
+	int lwp_to_thread (lwp_id)
+
+DESCRIPTION
+
+	This function converts a lightweight process id to a Posix or Solaris
+	thread id.  If thread_id is non-existent, that's an error.
+
+NOTES
+
+	This function probably shouldn't call error()...
+
+ */
+
+static int
+lwp_to_thread (lwp)
+     int lwp;
+{
+  td_thrinfo_t ti;
+  td_thrhandle_t th;
+  td_err_e val;
+
+  if (is_thread (lwp))
+    return lwp;			/* It's already a thread id */
+
+  /* It's an lwp.  Convert it to a thread id.  */
+
+  if (!sol_thread_alive (lwp))
+    return -1;			/* defunct lwp */
+
+  val = p_td_ta_map_lwp2thr (main_ta, GET_LWP (lwp), &th);
+  if (val == TD_NOTHR)
+    return -1;		/* thread must have terminated */
+  else if (val != TD_OK)
+    error ("lwp_to_thread: td_ta_map_lwp2thr: %s.", td_err_string (val));
+
+  val = p_td_thr_validate (&th);
+  if (val == TD_NOTHR)
+    return lwp;			/* libthread doesn't know about it, just return lwp */
+  else if (val != TD_OK)
+    error ("lwp_to_thread: td_thr_validate: %s.", td_err_string (val));
+
+  val = p_td_thr_get_info (&th, &ti);
+  if (val == TD_NOTHR)
+    return -1;		/* thread must have terminated */
+  else if (val != TD_OK)
+    error ("lwp_to_thread: td_thr_get_info: %s.", td_err_string (val));
+
+  return BUILD_THREAD (ti.ti_tid, PIDGET (lwp));
+}
+
+/*
+
+LOCAL FUNCTION
+
+	save_inferior_pid - Save inferior_pid on the cleanup list
+	restore_inferior_pid - Restore inferior_pid from the cleanup list
+
+SYNOPSIS
+
+	struct cleanup *save_inferior_pid ()
+	void restore_inferior_pid (int pid)
+
+DESCRIPTION
+
+	These two functions act in unison to restore inferior_pid in
+	case of an error.
+
+NOTES
+
+	inferior_pid is a global variable that needs to be changed by many of
+	these routines before calling functions in procfs.c.  In order to
+	guarantee that inferior_pid gets restored (in case of errors), you
+	need to call save_inferior_pid before changing it.  At the end of the
+	function, you should invoke do_cleanups to restore it.
+
+ */
+
+
+static struct cleanup *
+save_inferior_pid ()
+{
+  return make_cleanup (restore_inferior_pid, inferior_pid);
+}
+
+static void
+restore_inferior_pid (pid)
+     int pid;
+{
+  inferior_pid = pid;
+}
+
+
+/* Most target vector functions from here on actually just pass through to
+   procfs.c, as they don't need to do anything specific for threads.  */
+
+
+/* ARGSUSED */
+static void
+sol_thread_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  procfs_ops.to_open (arg, from_tty);
+}
+
+/* Attach to process PID, then initialize for debugging it
+   and wait for the trace-trap that results from attaching.  */
+
+static void
+sol_thread_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  procfs_ops.to_attach (args, from_tty);
+  /* Must get symbols from solibs before libthread_db can run! */
+  SOLIB_ADD ((char *)0, from_tty, (struct target_ops *)0);
+  if (sol_thread_active)
+    {
+      printf_filtered ("sol-thread active.\n");
+      main_ph.pid = inferior_pid; /* Save for xfer_memory */
+      push_target (&sol_thread_ops);
+      inferior_pid = lwp_to_thread (inferior_pid);
+      if (inferior_pid == -1)
+	inferior_pid = main_ph.pid;
+      else
+	add_thread (inferior_pid);
+    }
+  /* XXX - might want to iterate over all the threads and register them. */
+}
+
+/* Take a program previously attached to and detaches it.
+   The program resumes execution and will no longer stop
+   on signals, etc.  We'd better not have left any breakpoints
+   in the program or it'll die when it hits one.  For this
+   to work, it may be necessary for the process to have been
+   previously attached.  It *might* work if the program was
+   started via the normal ptrace (PTRACE_TRACEME).  */
+
+static void
+sol_thread_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  unpush_target (&sol_thread_ops);
+  procfs_ops.to_detach (args, from_tty);
+}
+
+/* Resume execution of process PID.  If STEP is nozero, then
+   just single step it.  If SIGNAL is nonzero, restart it with that
+   signal activated.  We may have to convert pid from a thread-id to an LWP id
+   for procfs.  */
+
+static void
+sol_thread_resume (pid, step, signo)
+     int pid;
+     int step;
+     enum target_signal signo;
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = thread_to_lwp (inferior_pid, main_ph.pid);
+  if (inferior_pid == -1)
+    inferior_pid = procfs_first_available ();
+
+  if (pid != -1)
+    {
+      int save_pid = pid;
+
+      pid = thread_to_lwp (pid, -2);
+      if (pid == -2)		/* Inactive thread */
+	error ("This version of Solaris can't start inactive threads.");
+      if (info_verbose && pid == -1)
+	warning ("Specified thread %d seems to have terminated", 
+		 GET_THREAD (save_pid));
+    }
+
+  procfs_ops.to_resume (pid, step, signo);
+
+  do_cleanups (old_chain);
+}
+
+/* Wait for any threads to stop.  We may have to convert PID from a thread id
+   to a LWP id, and vice versa on the way out.  */
+
+static int
+sol_thread_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  int rtnval;
+  int save_pid;
+  struct cleanup *old_chain;
+
+  save_pid = inferior_pid;
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = thread_to_lwp (inferior_pid, main_ph.pid);
+  if (inferior_pid == -1)
+    inferior_pid = procfs_first_available ();
+
+  if (pid != -1)
+    {
+      int save_pid = pid;
+
+      pid = thread_to_lwp (pid, -2);
+      if (pid == -2)		/* Inactive thread */
+	error ("This version of Solaris can't start inactive threads.");
+      if (info_verbose && pid == -1)
+	warning ("Specified thread %d seems to have terminated", 
+		 GET_THREAD (save_pid));
+    }
+
+  rtnval = procfs_ops.to_wait (pid, ourstatus);
+
+  if (ourstatus->kind != TARGET_WAITKIND_EXITED)
+    {
+      /* Map the LWP of interest back to the appropriate thread ID */
+      rtnval = lwp_to_thread (rtnval);
+      if (rtnval == -1)
+	rtnval = save_pid;
+
+      /* See if we have a new thread */
+      if (is_thread (rtnval)
+	  && rtnval != save_pid
+	  && !in_thread_list (rtnval))
+	{
+	  printf_filtered ("[New %s]\n", target_pid_to_str (rtnval));
+	  add_thread (rtnval);
+	}
+    }
+
+  /* During process initialization, we may get here without the thread package
+     being initialized, since that can only happen after we've found the shared
+     libs.  */
+
+  do_cleanups (old_chain);
+
+  return rtnval;
+}
+
+static void
+sol_thread_fetch_registers (regno)
+     int regno;
+{
+  thread_t thread;
+  td_thrhandle_t thandle;
+  td_err_e val;
+  prgregset_t gregset;
+  prfpregset_t fpregset;
+#if 0
+  int xregsize;
+  caddr_t xregset;
+#endif
+
+  if (!is_thread (inferior_pid))
+    { /* LWP: pass the request on to procfs.c */
+      if (target_has_execution)
+	procfs_ops.to_fetch_registers (regno);
+      else
+	orig_core_ops.to_fetch_registers (regno);
+      return;
+    }
+
+  /* Solaris thread: convert inferior_pid into a td_thrhandle_t */
+
+  thread = GET_THREAD (inferior_pid);
+
+  if (thread == 0)
+    error ("sol_thread_fetch_registers:  thread == 0");
+
+  val = p_td_ta_map_id2thr (main_ta, thread, &thandle);
+  if (val != TD_OK)
+    error ("sol_thread_fetch_registers: td_ta_map_id2thr: %s",
+	   td_err_string (val));
+
+  /* Get the integer regs */
+
+  val = p_td_thr_getgregs (&thandle, gregset);
+  if (val != TD_OK
+      && val != TD_PARTIALREG)
+    error ("sol_thread_fetch_registers: td_thr_getgregs %s",
+	   td_err_string (val));
+
+  /* For the sparc, TD_PARTIALREG means that only i0->i7, l0->l7, pc and sp
+     are saved (by a thread context switch).  */
+
+  /* And, now the fp regs */
+
+  val = p_td_thr_getfpregs (&thandle, &fpregset);
+  if (val != TD_OK
+      && val != TD_NOFPREGS)
+    error ("sol_thread_fetch_registers: td_thr_getfpregs %s",
+	   td_err_string (val));
+
+/* Note that we must call supply_{g fp}regset *after* calling the td routines
+   because the td routines call ps_lget* which affect the values stored in the
+   registers array.  */
+
+  supply_gregset (gregset);
+  supply_fpregset (&fpregset);
+
+#if 0
+/* thread_db doesn't seem to handle this right */
+  val = td_thr_getxregsize (&thandle, &xregsize);
+  if (val != TD_OK && val != TD_NOXREGS)
+    error ("sol_thread_fetch_registers: td_thr_getxregsize %s",
+	   td_err_string (val));
+
+  if (val == TD_OK)
+    {
+      xregset = alloca (xregsize);
+      val = td_thr_getxregs (&thandle, xregset);
+      if (val != TD_OK)
+	error ("sol_thread_fetch_registers: td_thr_getxregs %s",
+	       td_err_string (val));
+    }
+#endif
+}
+
+static void
+sol_thread_store_registers (regno)
+     int regno;
+{
+  thread_t thread;
+  td_thrhandle_t thandle;
+  td_err_e val;
+  prgregset_t regset;
+  prfpregset_t fpregset;
+#if 0
+  int xregsize;
+  caddr_t xregset;
+#endif
+
+  if (!is_thread (inferior_pid))
+    { /* LWP: pass the request on to procfs.c */
+      procfs_ops.to_store_registers (regno);
+      return;
+    }
+
+  /* Solaris thread: convert inferior_pid into a td_thrhandle_t */
+
+  thread = GET_THREAD (inferior_pid);
+
+  val = p_td_ta_map_id2thr (main_ta, thread, &thandle);
+  if (val != TD_OK)
+    error ("sol_thread_store_registers: td_ta_map_id2thr %s",
+	   td_err_string (val));
+
+  if (regno != -1)
+    {				/* Not writing all the regs */
+      /* save new register value */
+      char old_value[REGISTER_SIZE];
+      memcpy(old_value, & registers[REGISTER_BYTE(regno)], REGISTER_SIZE);
+
+      val = p_td_thr_getgregs (&thandle, regset);
+      if (val != TD_OK)
+	error ("sol_thread_store_registers: td_thr_getgregs %s",
+	       td_err_string (val));
+      val = p_td_thr_getfpregs (&thandle, &fpregset);
+      if (val != TD_OK)
+	error ("sol_thread_store_registers: td_thr_getfpregs %s",
+	       td_err_string (val));
+
+      /* restore new register value */
+      memcpy(& registers[REGISTER_BYTE(regno)], old_value, REGISTER_SIZE);
+
+#if 0
+/* thread_db doesn't seem to handle this right */
+      val = td_thr_getxregsize (&thandle, &xregsize);
+      if (val != TD_OK && val != TD_NOXREGS)
+	error ("sol_thread_store_registers: td_thr_getxregsize %s",
+	       td_err_string (val));
+
+      if (val == TD_OK)
+	{
+	  xregset = alloca (xregsize);
+	  val = td_thr_getxregs (&thandle, xregset);
+	  if (val != TD_OK)
+	    error ("sol_thread_store_registers: td_thr_getxregs %s",
+		   td_err_string (val));
+	}
+#endif
+    }
+
+  fill_gregset (regset, regno);
+  fill_fpregset (&fpregset, regno);
+
+  val = p_td_thr_setgregs (&thandle, regset);
+  if (val != TD_OK)
+    error ("sol_thread_store_registers: td_thr_setgregs %s",
+	   td_err_string (val));
+  val = p_td_thr_setfpregs (&thandle, &fpregset);
+  if (val != TD_OK)
+    error ("sol_thread_store_registers: td_thr_setfpregs %s",
+	   td_err_string (val));
+
+#if 0
+/* thread_db doesn't seem to handle this right */
+  val = td_thr_getxregsize (&thandle, &xregsize);
+  if (val != TD_OK && val != TD_NOXREGS)
+    error ("sol_thread_store_registers: td_thr_getxregsize %s",
+	   td_err_string (val));
+
+  /* Should probably do something about writing the xregs here, but what are
+     they? */
+#endif
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+sol_thread_prepare_to_store ()
+{
+  procfs_ops.to_prepare_to_store ();
+}
+
+static int
+sol_thread_xfer_memory (memaddr, myaddr, len, dowrite, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int dowrite;
+     struct target_ops *target; /* ignored */
+{
+  int retval;
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  if (is_thread (inferior_pid) ||		/* A thread */
+      !target_thread_alive (inferior_pid))	/* An lwp, but not alive */
+    inferior_pid = procfs_first_available ();	/* Find any live lwp.  */
+  /* Note: don't need to call switch_to_thread; we're just reading memory.  */
+
+  if (target_has_execution)
+    retval = procfs_ops.to_xfer_memory (memaddr, myaddr, len, dowrite, target);
+  else
+    retval = orig_core_ops.to_xfer_memory (memaddr, myaddr, len,
+					   dowrite, target);
+
+  do_cleanups (old_chain);
+
+  return retval;
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+sol_thread_files_info (ignore)
+     struct target_ops *ignore;
+{
+  procfs_ops.to_files_info (ignore);
+}
+
+static void
+sol_thread_kill_inferior ()
+{
+  procfs_ops.to_kill ();
+}
+
+static void
+sol_thread_notice_signals (pid)
+     int pid;
+{
+  procfs_ops.to_notice_signals (PIDGET (pid));
+}
+
+/* Fork an inferior process, and start debugging it with /proc.  */
+
+static void
+sol_thread_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  procfs_ops.to_create_inferior (exec_file, allargs, env);
+
+  if (sol_thread_active && inferior_pid != 0)
+    {
+      main_ph.pid = inferior_pid; /* Save for xfer_memory */
+
+      push_target (&sol_thread_ops);
+
+      inferior_pid = lwp_to_thread (inferior_pid);
+      if (inferior_pid == -1)
+	inferior_pid = main_ph.pid;
+
+      add_thread (inferior_pid);
+    }
+}
+
+/* This routine is called whenever a new symbol table is read in, or when all
+   symbol tables are removed.  libthread_db can only be initialized when it
+   finds the right variables in libthread.so.  Since it's a shared library,
+   those variables don't show up until the library gets mapped and the symbol
+   table is read in.  */
+
+void
+sol_thread_new_objfile (objfile)
+     struct objfile *objfile;
+{
+  td_err_e val;
+
+  if (!objfile)
+    {
+      sol_thread_active = 0;
+
+      return;
+    }
+
+  /* don't do anything if init failed to resolve the libthread_db library */
+  if (!procfs_suppress_run)
+    return;
+
+  /* Now, initialize the thread debugging library.  This needs to be done after
+     the shared libraries are located because it needs information from the
+     user's thread library.  */
+
+  val = p_td_init ();
+  if (val != TD_OK)
+    error ("target_new_objfile: td_init: %s", td_err_string (val));
+
+  val = p_td_ta_new (&main_ph, &main_ta);
+  if (val == TD_NOLIBTHREAD)
+    return;
+  else if (val != TD_OK)
+    error ("target_new_objfile: td_ta_new: %s", td_err_string (val));
+
+  sol_thread_active = 1;
+}
+
+/* Clean up after the inferior dies.  */
+
+static void
+sol_thread_mourn_inferior ()
+{
+  unpush_target (&sol_thread_ops);
+  procfs_ops.to_mourn_inferior ();
+}
+
+/* Mark our target-struct as eligible for stray "run" and "attach" commands.  */
+
+static int
+sol_thread_can_run ()
+{
+  return procfs_suppress_run;
+}
+
+/* 
+
+LOCAL FUNCTION
+
+	sol_thread_alive     - test thread for "aliveness"
+
+SYNOPSIS
+
+	static bool sol_thread_alive (int pid);
+
+DESCRIPTION
+
+	returns true if thread still active in inferior.
+
+ */
+
+static int
+sol_thread_alive (pid)
+     int pid;
+{
+  if (is_thread (pid))		/* non-kernel thread */
+    {
+      td_err_e val;
+      td_thrhandle_t th;
+
+      pid = GET_THREAD (pid);
+      if ((val = p_td_ta_map_id2thr (main_ta, pid, &th)) != TD_OK)
+	return 0;	/* thread not found */
+      if ((val = p_td_thr_validate (&th)) != TD_OK)
+	return 0;	/* thread not valid */
+      return 1;		/* known thread: return true */
+    }
+  else			/* kernel thread (LWP): let procfs test it */
+    {
+      if (target_has_execution)
+	return procfs_ops.to_thread_alive (pid);
+      else
+	return orig_core_ops.to_thread_alive (pid);
+    }
+}
+
+static void
+sol_thread_stop ()
+{
+  procfs_ops.to_stop ();
+}
+
+/* These routines implement the lower half of the thread_db interface.  Ie: the
+   ps_* routines.  */
+
+/* Various versions of <proc_service.h> have slightly
+   different function prototypes.  In particular, we have
+
+      NEWER		    	OLDER
+      struct ps_prochandle *  	const struct ps_prochandle *
+      void*			char*
+      const void*		char*
+      int			size_t
+
+   Which one you have depends on solaris version and what
+   patches you've applied.  On the theory that there are
+   only two major variants, we have configure check the
+   prototype of ps_pdwrite (), and use that info to make
+   appropriate typedefs here. */
+
+#ifdef PROC_SERVICE_IS_OLD
+typedef const struct ps_prochandle * gdb_ps_prochandle_t;
+typedef char * gdb_ps_read_buf_t;
+typedef char * gdb_ps_write_buf_t;
+typedef int gdb_ps_size_t;
+#else
+typedef struct ps_prochandle * gdb_ps_prochandle_t;
+typedef void * gdb_ps_read_buf_t;
+typedef const void * gdb_ps_write_buf_t;
+typedef size_t gdb_ps_size_t;
+#endif
+
+
+/* The next four routines are called by thread_db to tell us to stop and stop
+   a particular process or lwp.  Since GDB ensures that these are all stopped
+   by the time we call anything in thread_db, these routines need to do
+   nothing.  */
+
+ps_err_e
+ps_pstop (gdb_ps_prochandle_t ph)
+{
+  return PS_OK;
+}
+
+ps_err_e
+ps_pcontinue (gdb_ps_prochandle_t ph)
+{
+  return PS_OK;
+}
+
+ps_err_e
+ps_lstop (gdb_ps_prochandle_t ph, lwpid_t lwpid)
+{
+  return PS_OK;
+}
+
+ps_err_e
+ps_lcontinue (gdb_ps_prochandle_t ph, lwpid_t lwpid)
+{
+  return PS_OK;
+}
+
+ps_err_e
+ps_pglobal_lookup (gdb_ps_prochandle_t ph, const char *ld_object_name,
+		   const char *ld_symbol_name, paddr_t *ld_symbol_addr)
+{
+  struct minimal_symbol *ms;
+
+  ms = lookup_minimal_symbol (ld_symbol_name, NULL, NULL);
+
+  if (!ms)
+    return PS_NOSYM;
+
+  *ld_symbol_addr = SYMBOL_VALUE_ADDRESS (ms);
+
+  return PS_OK;
+}
+
+/* Common routine for reading and writing memory.  */
+
+static ps_err_e
+rw_common (int dowrite, const struct ps_prochandle *ph, paddr_t addr,
+	   char *buf, int size)
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  if (is_thread (inferior_pid) ||		/* A thread */
+      !target_thread_alive (inferior_pid))	/* An lwp, but not alive */
+    inferior_pid = procfs_first_available ();	/* Find any live lwp.  */
+  /* Note: don't need to call switch_to_thread; we're just reading memory.  */
+
+  while (size > 0)
+    {
+      int cc;
+
+      if (target_has_execution)
+	cc = procfs_ops.to_xfer_memory (addr, buf, size, dowrite, &procfs_ops);
+      else
+	cc = orig_core_ops.to_xfer_memory (addr, buf, size, dowrite, &core_ops);
+
+      if (cc < 0)
+	{
+	  if (dowrite == 0)
+	    print_sys_errmsg ("rw_common (): read", errno);
+	  else
+	    print_sys_errmsg ("rw_common (): write", errno);
+
+	  do_cleanups (old_chain);
+
+	  return PS_ERR;
+	}
+      size -= cc;
+      buf += cc;
+    }
+
+  do_cleanups (old_chain);
+
+  return PS_OK;
+}
+
+ps_err_e
+ps_pdread (gdb_ps_prochandle_t ph, paddr_t addr,
+	   gdb_ps_read_buf_t buf, gdb_ps_size_t size)
+{
+  return rw_common (0, ph, addr, buf, size);
+}
+
+ps_err_e
+ps_pdwrite (gdb_ps_prochandle_t ph, paddr_t addr,
+	    gdb_ps_write_buf_t buf, gdb_ps_size_t size)
+{
+  return rw_common (1, ph, addr, (char*) buf, size);
+}
+
+ps_err_e
+ps_ptread (gdb_ps_prochandle_t ph, paddr_t addr,
+	   gdb_ps_read_buf_t buf, gdb_ps_size_t size)
+{
+  return rw_common (0, ph, addr, buf, size);
+}
+
+ps_err_e
+ps_ptwrite (gdb_ps_prochandle_t ph, paddr_t addr,
+	    gdb_ps_write_buf_t buf, gdb_ps_size_t size)
+{
+  return rw_common (1, ph, addr, (char*) buf, size);
+}
+
+/* Get integer regs */
+
+ps_err_e
+ps_lgetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+	     prgregset_t gregset)
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = BUILD_LWP (lwpid, PIDGET (inferior_pid));
+  
+  if (target_has_execution)
+    procfs_ops.to_fetch_registers (-1);
+  else
+    orig_core_ops.to_fetch_registers (-1);
+  fill_gregset (gregset, -1);
+
+  do_cleanups (old_chain);
+
+  return PS_OK;
+}
+
+/* Set integer regs */
+
+ps_err_e
+ps_lsetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+	     const prgregset_t gregset)
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = BUILD_LWP (lwpid, PIDGET (inferior_pid));
+  
+  supply_gregset (gregset);
+  if (target_has_execution)
+    procfs_ops.to_store_registers (-1);
+  else
+    orig_core_ops.to_store_registers (-1);
+
+  do_cleanups (old_chain);
+
+  return PS_OK;
+}
+
+void
+ps_plog (const char *fmt, ...)
+{
+  va_list args;
+
+  va_start (args, fmt);
+
+  vfprintf_filtered (gdb_stderr, fmt, args);
+}
+
+/* Get size of extra register set.  Currently a noop.  */
+
+ps_err_e
+ps_lgetxregsize (gdb_ps_prochandle_t ph, lwpid_t lwpid, int *xregsize)
+{
+#if 0
+  int lwp_fd;
+  int regsize;
+  ps_err_e val;
+
+  val = get_lwp_fd (ph, lwpid, &lwp_fd);
+  if (val != PS_OK)
+    return val;
+
+  if (ioctl (lwp_fd, PIOCGXREGSIZE, &regsize))
+    {
+      if (errno == EINVAL)
+	return PS_NOFREGS;	/* XXX Wrong code, but this is the closest
+				   thing in proc_service.h  */
+
+      print_sys_errmsg ("ps_lgetxregsize (): PIOCGXREGSIZE", errno);
+      return PS_ERR;
+    }
+#endif
+
+  return PS_OK;
+}
+
+/* Get extra register set.  Currently a noop.  */
+
+ps_err_e
+ps_lgetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)
+{
+#if 0
+  int lwp_fd;
+  ps_err_e val;
+
+  val = get_lwp_fd (ph, lwpid, &lwp_fd);
+  if (val != PS_OK)
+    return val;
+
+  if (ioctl (lwp_fd, PIOCGXREG, xregset))
+    {
+      print_sys_errmsg ("ps_lgetxregs (): PIOCGXREG", errno);
+      return PS_ERR;
+    }
+#endif
+
+  return PS_OK;
+}
+
+/* Set extra register set.  Currently a noop.  */
+
+ps_err_e
+ps_lsetxregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, caddr_t xregset)
+{
+#if 0
+  int lwp_fd;
+  ps_err_e val;
+
+  val = get_lwp_fd (ph, lwpid, &lwp_fd);
+  if (val != PS_OK)
+    return val;
+
+  if (ioctl (lwp_fd, PIOCSXREG, xregset))
+    {
+      print_sys_errmsg ("ps_lsetxregs (): PIOCSXREG", errno);
+      return PS_ERR;
+    }
+#endif
+
+  return PS_OK;
+}
+
+/* Get floating-point regs.  */
+
+ps_err_e
+ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+	       prfpregset_t *fpregset)
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = BUILD_LWP (lwpid, PIDGET (inferior_pid));
+
+  if (target_has_execution)
+    procfs_ops.to_fetch_registers (-1);
+  else
+    orig_core_ops.to_fetch_registers (-1);
+  fill_fpregset (fpregset, -1);
+
+  do_cleanups (old_chain);
+
+  return PS_OK;
+}
+
+/* Set floating-point regs.  */
+
+ps_err_e
+ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+	       const prfpregset_t *fpregset)
+{
+  struct cleanup *old_chain;
+
+  old_chain = save_inferior_pid ();
+
+  inferior_pid = BUILD_LWP (lwpid, PIDGET (inferior_pid));
+  
+  supply_fpregset (fpregset);
+  if (target_has_execution)
+    procfs_ops.to_store_registers (-1);
+  else
+    orig_core_ops.to_store_registers (-1);
+
+  do_cleanups (old_chain);
+
+  return PS_OK;
+}
+
+#ifdef TM_I386SOL2_H
+
+/* Get local descriptor table.  */
+
+#include <sys/procfs.h>
+#include <sys/reg.h>
+#include <sys/sysi86.h>
+
+static int nldt_allocated = 0;
+static struct ssd *ldt_bufp = NULL;
+
+ps_err_e
+ps_lgetLDT (gdb_ps_prochandle_t ph, lwpid_t lwpid,
+	    struct ssd *pldt)
+{
+  gregset_t gregset;
+  int lwp_fd;
+  ps_err_e val;
+  int nldt;
+  int i;
+
+  /* Get procfs file descriptor for the LWP.  */
+  lwp_fd = procfs_get_pid_fd (BUILD_LWP (lwpid, PIDGET (inferior_pid)));
+  if (lwp_fd < 0)
+    return PS_BADLID;
+
+  /* Fetch registers und LDT descriptors.  */
+  if (ioctl (lwp_fd, PIOCGREG, &gregset) == -1)
+    return PS_ERR;
+
+  if (ioctl (lwp_fd, PIOCNLDT, &nldt) == -1)
+    return PS_ERR;
+
+  if (nldt_allocated < nldt)
+    {
+      ldt_bufp
+	= (struct ssd *) xrealloc (ldt_bufp, (nldt + 1) * sizeof (struct ssd));
+      nldt_allocated = nldt;
+    }
+
+  if (ioctl (lwp_fd, PIOCLDT, ldt_bufp) == -1)
+    return PS_ERR;
+
+  /* Search LDT for the LWP via register GS.  */
+  for (i = 0; i < nldt; i++)
+    {
+      if (ldt_bufp[i].sel == (gregset[GS] & 0xffff))
+	{
+	  *pldt = ldt_bufp[i];
+	  return PS_OK;
+	}
+    }
+
+  /* LDT not found.  */
+  return PS_ERR;
+}        
+#endif /* TM_I386SOL2_H */
+
+/* Convert a pid to printable form. */
+
+char *
+solaris_pid_to_str (pid)
+     int pid;
+{
+  static char buf[100];
+
+  /* in case init failed to resolve the libthread_db library */
+  if (!procfs_suppress_run)
+    return procfs_pid_to_str (pid);
+
+  if (is_thread (pid))
+    {
+      int lwp;
+
+      lwp = thread_to_lwp (pid, -2);
+
+      if (lwp == -1)
+	sprintf (buf, "Thread %d (defunct)", GET_THREAD (pid));
+      else if (lwp != -2)
+	sprintf (buf, "Thread %d (LWP %d)", GET_THREAD (pid), GET_LWP (lwp));
+      else
+	sprintf (buf, "Thread %d        ", GET_THREAD (pid));
+    }
+  else if (GET_LWP (pid) != 0)
+    sprintf (buf, "LWP    %d        ", GET_LWP (pid));
+  else
+    sprintf (buf, "process %d    ", PIDGET (pid));
+
+  return buf;
+}
+
+
+/* Worker bee for find_new_threads
+   Callback function that gets called once per USER thread (i.e., not
+   kernel) thread. */
+
+static int
+sol_find_new_threads_callback(th, ignored)
+     const td_thrhandle_t *th;
+     void *ignored;
+{
+  td_err_e retval;
+  td_thrinfo_t ti;
+  int pid;
+
+  if ((retval = p_td_thr_get_info(th, &ti)) != TD_OK)
+    {
+      return -1;
+    }
+  pid = BUILD_THREAD(ti.ti_tid, PIDGET(inferior_pid));
+  if (!in_thread_list(pid))
+    add_thread(pid);
+
+  return 0;
+}
+
+void
+sol_find_new_threads()
+{
+  /* don't do anything if init failed to resolve the libthread_db library */
+  if (!procfs_suppress_run)
+    return;
+
+  if (inferior_pid == -1)
+    {
+      printf_filtered("No process.\n");
+      return;
+    }
+  p_td_ta_thr_iter (main_ta, sol_find_new_threads_callback, (void *)0,
+		    TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY,
+		    TD_SIGNO_MASK, TD_THR_ANY_USER_FLAGS);
+}
+
+static void
+sol_core_open (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  orig_core_ops.to_open (filename, from_tty);
+}
+
+static void
+sol_core_close (quitting)
+     int quitting;
+{
+  orig_core_ops.to_close (quitting);
+}
+
+static void
+sol_core_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  unpush_target (&core_ops);
+  orig_core_ops.to_detach (args, from_tty);
+}
+
+static void
+sol_core_files_info (t)
+     struct target_ops *t;
+{
+  orig_core_ops.to_files_info (t);
+}
+
+#ifdef MAINTENANCE_CMDS
+/* Worker bee for info sol-thread command.  This is a callback function that
+   gets called once for each Solaris thread (ie. not kernel thread) in the 
+   inferior.  Print anything interesting that we can think of.  */
+
+static int 
+info_cb (th, s)
+     const td_thrhandle_t *th;
+     void *s;
+{
+  td_err_e ret;
+  td_thrinfo_t ti;
+  struct minimal_symbol *msym;
+
+  if ((ret = p_td_thr_get_info (th, &ti)) == TD_OK)
+    {
+      printf_filtered ("%s thread #%d, lwp %d, ", 
+		       ti.ti_type == TD_THR_SYSTEM ? "system" : "user  ", 
+		       ti.ti_tid, ti.ti_lid);
+      switch (ti.ti_state) {
+	default:
+	case TD_THR_UNKNOWN: printf_filtered ("<unknown state>");	break;
+	case TD_THR_STOPPED: printf_filtered ("(stopped)");	break;
+	case TD_THR_RUN:     printf_filtered ("(run)    ");	break;
+	case TD_THR_ACTIVE:  printf_filtered ("(active) ");	break;
+	case TD_THR_ZOMBIE:  printf_filtered ("(zombie) ");	break;
+	case TD_THR_SLEEP:   printf_filtered ("(asleep) ");	break;
+	case TD_THR_STOPPED_ASLEEP: 
+	  printf_filtered ("(stopped asleep)");			break;
+      }
+      /* Print thr_create start function: */
+      if (ti.ti_startfunc != 0)
+	if (msym = lookup_minimal_symbol_by_pc (ti.ti_startfunc))
+	  printf_filtered ("   startfunc: %s\n", SYMBOL_NAME (msym));
+	else
+	  printf_filtered ("   startfunc: 0x%08x\n", ti.ti_startfunc);
+
+      /* If thread is asleep, print function that went to sleep: */
+      if (ti.ti_state == TD_THR_SLEEP)
+	if (msym = lookup_minimal_symbol_by_pc (ti.ti_pc))
+	  printf_filtered (" - Sleep func: %s\n", SYMBOL_NAME (msym));
+	else
+	  printf_filtered (" - Sleep func: 0x%08x\n", ti.ti_startfunc);
+
+      /* Wrap up line, if necessary */
+      if (ti.ti_state != TD_THR_SLEEP && ti.ti_startfunc == 0)
+	printf_filtered ("\n");	/* don't you hate counting newlines? */
+    }
+  else
+    warning ("info sol-thread: failed to get info for thread.");
+
+  return 0;    
+}
+
+/* List some state about each Solaris user thread in the inferior.  */
+
+static void
+info_solthreads (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  p_td_ta_thr_iter (main_ta, info_cb, args, 
+		    TD_THR_ANY_STATE, TD_THR_LOWEST_PRIORITY,
+		    TD_SIGNO_MASK, TD_THR_ANY_USER_FLAGS);
+}
+#endif /* MAINTENANCE_CMDS */
+
+static int
+ignore (addr, contents)
+     CORE_ADDR addr;
+     char *contents;
+{
+  return 0;
+}
+
+
+static void
+init_sol_thread_ops ()
+{
+  sol_thread_ops.to_shortname = "solaris-threads";
+  sol_thread_ops.to_longname = "Solaris threads and pthread.";
+  sol_thread_ops.to_doc = "Solaris threads and pthread support.";
+  sol_thread_ops.to_open = sol_thread_open;
+  sol_thread_ops.to_close = 0;
+  sol_thread_ops.to_attach = sol_thread_attach;
+  sol_thread_ops.to_detach = sol_thread_detach;
+  sol_thread_ops.to_resume = sol_thread_resume;
+  sol_thread_ops.to_wait = sol_thread_wait;
+  sol_thread_ops.to_fetch_registers = sol_thread_fetch_registers;
+  sol_thread_ops.to_store_registers = sol_thread_store_registers;
+  sol_thread_ops.to_prepare_to_store = sol_thread_prepare_to_store;
+  sol_thread_ops.to_xfer_memory = sol_thread_xfer_memory;
+  sol_thread_ops.to_files_info = sol_thread_files_info;
+  sol_thread_ops.to_insert_breakpoint = memory_insert_breakpoint;
+  sol_thread_ops.to_remove_breakpoint = memory_remove_breakpoint;
+  sol_thread_ops.to_terminal_init = terminal_init_inferior;
+  sol_thread_ops.to_terminal_inferior = terminal_inferior;
+  sol_thread_ops.to_terminal_ours_for_output = terminal_ours_for_output;
+  sol_thread_ops.to_terminal_ours = terminal_ours;
+  sol_thread_ops.to_terminal_info = child_terminal_info;
+  sol_thread_ops.to_kill = sol_thread_kill_inferior;
+  sol_thread_ops.to_load = 0;
+  sol_thread_ops.to_lookup_symbol = 0;
+  sol_thread_ops.to_create_inferior = sol_thread_create_inferior;
+  sol_thread_ops.to_mourn_inferior = sol_thread_mourn_inferior;
+  sol_thread_ops.to_can_run = sol_thread_can_run;
+  sol_thread_ops.to_notice_signals = sol_thread_notice_signals;
+  sol_thread_ops.to_thread_alive = sol_thread_alive;
+  sol_thread_ops.to_stop = sol_thread_stop;
+  sol_thread_ops.to_stratum = process_stratum;
+  sol_thread_ops.to_has_all_memory = 1;
+  sol_thread_ops.to_has_memory = 1;
+  sol_thread_ops.to_has_stack = 1;
+  sol_thread_ops.to_has_registers = 1;
+  sol_thread_ops.to_has_execution = 1;
+  sol_thread_ops.to_has_thread_control = tc_none;
+  sol_thread_ops.to_sections = 0;
+  sol_thread_ops.to_sections_end = 0;
+  sol_thread_ops.to_magic = OPS_MAGIC;
+}
+
+
+static void
+init_sol_core_ops ()
+{
+  sol_core_ops.to_shortname  = "solaris-core";
+  sol_core_ops.to_longname  = "Solaris core threads and pthread.";
+  sol_core_ops.to_doc  = "Solaris threads and pthread support for core files.";
+  sol_core_ops.to_open  = sol_core_open;
+  sol_core_ops.to_close  = sol_core_close;
+  sol_core_ops.to_attach  = sol_thread_attach;
+  sol_core_ops.to_detach  = sol_core_detach;
+  /* sol_core_ops.to_resume  = 0; */
+  /* sol_core_ops.to_wait  = 0;	 */
+  sol_core_ops.to_fetch_registers  = sol_thread_fetch_registers;
+  /* sol_core_ops.to_store_registers  = 0; */
+  /* sol_core_ops.to_prepare_to_store  = 0; */
+  sol_core_ops.to_xfer_memory  = sol_thread_xfer_memory;
+  sol_core_ops.to_files_info  = sol_core_files_info;
+  sol_core_ops.to_insert_breakpoint  = ignore;
+  sol_core_ops.to_remove_breakpoint  = ignore;
+  /* sol_core_ops.to_terminal_init  = 0; */
+  /* sol_core_ops.to_terminal_inferior  = 0; */
+  /* sol_core_ops.to_terminal_ours_for_output  = 0; */
+  /* sol_core_ops.to_terminal_ours  = 0; */
+  /* sol_core_ops.to_terminal_info  = 0; */
+  /* sol_core_ops.to_kill  = 0; */
+  /* sol_core_ops.to_load  = 0; */
+  /* sol_core_ops.to_lookup_symbol  = 0; */
+  sol_core_ops.to_create_inferior  = sol_thread_create_inferior;
+  sol_core_ops.to_stratum  = core_stratum;
+  sol_core_ops.to_has_all_memory  = 0;
+  sol_core_ops.to_has_memory  = 1;
+  sol_core_ops.to_has_stack  = 1;
+  sol_core_ops.to_has_registers  = 1;
+  sol_core_ops.to_has_execution  = 0;
+  sol_core_ops.to_has_thread_control  = tc_none;
+  sol_core_ops.to_sections  = 0;
+  sol_core_ops.to_sections_end  = 0;
+  sol_core_ops.to_magic  = OPS_MAGIC;
+}
+
+/* we suppress the call to add_target of core_ops in corelow because
+   if there are two targets in the stratum core_stratum, find_core_target
+   won't know which one to return.  see corelow.c for an additonal
+   comment on coreops_suppress_target. */
+int coreops_suppress_target = 1;
+
+void
+_initialize_sol_thread ()
+{
+  void *dlhandle;
+
+  init_sol_thread_ops ();
+  init_sol_core_ops ();
+
+  dlhandle = dlopen ("libthread_db.so.1", RTLD_NOW);
+  if (!dlhandle)
+    goto die;
+
+#define resolve(X) \
+  if (!(p_##X = dlsym (dlhandle, #X))) \
+    goto die;
+
+  resolve (td_log);
+  resolve (td_ta_new);
+  resolve (td_ta_delete);
+  resolve (td_init);
+  resolve (td_ta_get_ph);
+  resolve (td_ta_get_nthreads);
+  resolve (td_ta_tsd_iter);
+  resolve (td_ta_thr_iter);
+  resolve (td_thr_validate);
+  resolve (td_thr_tsd);
+  resolve (td_thr_get_info);
+  resolve (td_thr_getfpregs);
+  resolve (td_thr_getxregsize);
+  resolve (td_thr_getxregs);
+  resolve (td_thr_sigsetmask);
+  resolve (td_thr_setprio);
+  resolve (td_thr_setsigpending);
+  resolve (td_thr_setfpregs);
+  resolve (td_thr_setxregs);
+  resolve (td_ta_map_id2thr);
+  resolve (td_ta_map_lwp2thr);
+  resolve (td_thr_getgregs);
+  resolve (td_thr_setgregs);
+
+  add_target (&sol_thread_ops);
+
+  procfs_suppress_run = 1;
+
+#ifdef MAINTENANCE_CMDS
+  add_cmd ("sol-threads", class_maintenance, info_solthreads, 
+	    "Show info on Solaris user threads.\n", &maintenanceinfolist);
+#endif /* MAINTENANCE_CMDS */
+
+  memcpy(&orig_core_ops, &core_ops, sizeof (struct target_ops));
+  memcpy(&core_ops, &sol_core_ops, sizeof (struct target_ops));
+  add_target (&core_ops);
+
+  return;
+
+ die:
+
+  fprintf_unfiltered (gdb_stderr, "[GDB will not be able to debug user-mode threads: %s]\n", dlerror ());
+
+  if (dlhandle)
+    dlclose (dlhandle);
+
+  /* allow the user to debug non-threaded core files */
+  add_target(&core_ops);
+
+  return;
+}
diff --git a/gdb/solib.c b/gdb/solib.c
new file mode 100644
index 0000000..6d6fd4a
--- /dev/null
+++ b/gdb/solib.c
@@ -0,0 +1,1888 @@
+/* Handle SunOS and SVR4 shared libraries for GDB, the GNU Debugger.
+   Copyright 1990, 91, 92, 93, 94, 95, 96, 98, 1999
+   Free Software Foundation, Inc.
+   
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+
+/* This file is only compilable if link.h is available. */
+
+#ifdef HAVE_LINK_H
+
+#include <sys/types.h>
+#include <signal.h>
+#include "gdb_string.h"
+#include <sys/param.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#ifndef SVR4_SHARED_LIBS
+ /* SunOS shared libs need the nlist structure.  */
+#include <a.out.h> 
+#else
+#include "elf/external.h"
+#endif
+
+#include <link.h>
+
+#include "symtab.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "target.h"
+#include "frame.h"
+#include "gnu-regex.h"
+#include "inferior.h"
+#include "environ.h"
+#include "language.h"
+#include "gdbcmd.h"
+
+#define MAX_PATH_SIZE 512		/* FIXME: Should be dynamic */
+
+/* On SVR4 systems, a list of symbols in the dynamic linker where
+   GDB can try to place a breakpoint to monitor shared library
+   events.
+
+   If none of these symbols are found, or other errors occur, then
+   SVR4 systems will fall back to using a symbol as the "startup
+   mapping complete" breakpoint address.  */
+
+#ifdef SVR4_SHARED_LIBS
+static char *solib_break_names[] = {
+  "r_debug_state",
+  "_r_debug_state",
+  "_dl_debug_state",
+  "rtld_db_dlactivity",
+  NULL
+};
+#endif
+
+#define BKPT_AT_SYMBOL 1
+
+#if defined (BKPT_AT_SYMBOL) && defined (SVR4_SHARED_LIBS)
+static char *bkpt_names[] = {
+#ifdef SOLIB_BKPT_NAME
+  SOLIB_BKPT_NAME,		/* Prefer configured name if it exists. */
+#endif
+  "_start",
+  "main",
+  NULL
+};
+#endif
+
+/* Symbols which are used to locate the base of the link map structures. */
+
+#ifndef SVR4_SHARED_LIBS
+static char *debug_base_symbols[] = {
+  "_DYNAMIC",
+  "_DYNAMIC__MGC",
+  NULL
+};
+#endif
+
+static char *main_name_list[] = {
+  "main_$main",
+  NULL
+};
+
+/* local data declarations */
+
+#ifndef SVR4_SHARED_LIBS
+
+#define LM_ADDR(so) ((so) -> lm.lm_addr)
+#define LM_NEXT(so) ((so) -> lm.lm_next)
+#define LM_NAME(so) ((so) -> lm.lm_name)
+/* Test for first link map entry; first entry is a shared library. */
+#define IGNORE_FIRST_LINK_MAP_ENTRY(x) (0)
+static struct link_dynamic dynamic_copy;
+static struct link_dynamic_2 ld_2_copy;
+static struct ld_debug debug_copy;
+static CORE_ADDR debug_addr;
+static CORE_ADDR flag_addr;
+
+#else	/* SVR4_SHARED_LIBS */
+
+#define LM_ADDR(so) ((so) -> lm.l_addr)
+#define LM_NEXT(so) ((so) -> lm.l_next)
+#define LM_NAME(so) ((so) -> lm.l_name)
+/* Test for first link map entry; first entry is the exec-file. */
+#define IGNORE_FIRST_LINK_MAP_ENTRY(x) ((x).l_prev == NULL)
+static struct r_debug debug_copy;
+char shadow_contents[BREAKPOINT_MAX];	/* Stash old bkpt addr contents */
+
+#endif	/* !SVR4_SHARED_LIBS */
+
+struct so_list {
+  struct so_list *next;			/* next structure in linked list */
+  struct link_map lm;			/* copy of link map from inferior */
+  struct link_map *lmaddr;		/* addr in inferior lm was read from */
+  CORE_ADDR lmend;			/* upper addr bound of mapped object */
+  char so_name[MAX_PATH_SIZE];		/* shared object lib name (FIXME) */
+  char symbols_loaded;			/* flag: symbols read in yet? */
+  char from_tty;			/* flag: print msgs? */
+  struct objfile *objfile;		/* objfile for loaded lib */
+  struct section_table *sections;
+  struct section_table *sections_end;
+  struct section_table *textsection;
+  bfd *abfd;
+};
+
+static struct so_list *so_list_head;	/* List of known shared objects */
+static CORE_ADDR debug_base;		/* Base of dynamic linker structures */
+static CORE_ADDR breakpoint_addr;	/* Address where end bkpt is set */
+
+static int solib_cleanup_queued = 0;    /* make_run_cleanup called */
+
+extern int
+fdmatch PARAMS ((int, int));		/* In libiberty */
+
+/* Local function prototypes */
+
+static void
+do_clear_solib PARAMS ((PTR));
+
+static int
+match_main PARAMS ((char *));
+
+static void
+special_symbol_handling PARAMS ((struct so_list *));
+
+static void
+sharedlibrary_command PARAMS ((char *, int));
+
+static int
+enable_break PARAMS ((void));
+
+static void
+info_sharedlibrary_command PARAMS ((char *, int));
+
+static int symbol_add_stub PARAMS ((PTR));
+
+static struct so_list *
+find_solib PARAMS ((struct so_list *));
+
+static struct link_map *
+first_link_map_member PARAMS ((void));
+
+static CORE_ADDR
+locate_base PARAMS ((void));
+
+static int solib_map_sections PARAMS ((PTR));
+
+#ifdef SVR4_SHARED_LIBS
+
+static CORE_ADDR
+elf_locate_base PARAMS ((void));
+
+#else
+
+static int
+disable_break PARAMS ((void));
+
+static void
+allocate_rt_common_objfile PARAMS ((void));
+
+static void
+solib_add_common_symbols PARAMS ((struct rtc_symb *));
+
+#endif
+
+void _initialize_solib PARAMS ((void));
+
+/* If non-zero, this is a prefix that will be added to the front of the name
+   shared libraries with an absolute filename for loading.  */
+static char *solib_absolute_prefix = NULL;
+
+/* If non-empty, this is a search path for loading non-absolute shared library
+   symbol files.  This takes precedence over the environment variables PATH
+   and LD_LIBRARY_PATH.  */
+static char *solib_search_path = NULL;
+
+/*
+
+LOCAL FUNCTION
+
+	solib_map_sections -- open bfd and build sections for shared lib
+
+SYNOPSIS
+
+	static int solib_map_sections (struct so_list *so)
+
+DESCRIPTION
+
+	Given a pointer to one of the shared objects in our list
+	of mapped objects, use the recorded name to open a bfd
+	descriptor for the object, build a section table, and then
+	relocate all the section addresses by the base address at
+	which the shared object was mapped.
+
+FIXMES
+
+	In most (all?) cases the shared object file name recorded in the
+	dynamic linkage tables will be a fully qualified pathname.  For
+	cases where it isn't, do we really mimic the systems search
+	mechanism correctly in the below code (particularly the tilde
+	expansion stuff?).
+ */
+
+static int
+solib_map_sections (arg)
+     PTR arg;
+{
+  struct so_list *so = (struct so_list *) arg;	/* catch_errors bogon */
+  char *filename;
+  char *scratch_pathname;
+  int scratch_chan;
+  struct section_table *p;
+  struct cleanup *old_chain;
+  bfd *abfd;
+  
+  filename = tilde_expand (so -> so_name);
+  
+  if (solib_absolute_prefix && ROOTED_P (filename))
+    /* Prefix shared libraries with absolute filenames with
+       SOLIB_ABSOLUTE_PREFIX.  */
+    {
+      char *pfxed_fn;
+      int pfx_len;
+
+      pfx_len = strlen (solib_absolute_prefix);
+
+      /* Remove trailing slashes.  */
+      while (pfx_len > 0 && SLASH_P (solib_absolute_prefix[pfx_len - 1]))
+	pfx_len--;
+
+      pfxed_fn = xmalloc (pfx_len + strlen (filename) + 1);
+      strcpy (pfxed_fn, solib_absolute_prefix);
+      strcat (pfxed_fn, filename);
+      free (filename);
+
+      filename = pfxed_fn;
+    }
+
+  old_chain = make_cleanup (free, filename);
+
+  scratch_chan = -1;
+
+  if (solib_search_path)
+    scratch_chan = openp (solib_search_path,
+			  1, filename, O_RDONLY, 0, &scratch_pathname);
+  if (scratch_chan < 0)
+    scratch_chan = openp (get_in_environ (inferior_environ, "PATH"), 
+			  1, filename, O_RDONLY, 0, &scratch_pathname);
+  if (scratch_chan < 0)
+    {
+      scratch_chan = openp (get_in_environ 
+			    (inferior_environ, "LD_LIBRARY_PATH"), 
+			    1, filename, O_RDONLY, 0, &scratch_pathname);
+    }
+  if (scratch_chan < 0)
+    {
+      perror_with_name (filename);
+    }
+  /* Leave scratch_pathname allocated.  abfd->name will point to it.  */
+
+  abfd = bfd_fdopenr (scratch_pathname, gnutarget, scratch_chan);
+  if (!abfd)
+    {
+      close (scratch_chan);
+      error ("Could not open `%s' as an executable file: %s",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  /* Leave bfd open, core_xfer_memory and "info files" need it.  */
+  so -> abfd = abfd;
+  abfd -> cacheable = true;
+
+  /* copy full path name into so_name, so that later symbol_file_add can find
+     it */
+  if (strlen (scratch_pathname) >= MAX_PATH_SIZE)
+    error ("Full path name length of shared library exceeds MAX_PATH_SIZE in so_list structure.");
+  strcpy (so->so_name, scratch_pathname);
+
+  if (!bfd_check_format (abfd, bfd_object))
+    {
+      error ("\"%s\": not in executable format: %s.",
+	     scratch_pathname, bfd_errmsg (bfd_get_error ()));
+    }
+  if (build_section_table (abfd, &so -> sections, &so -> sections_end))
+    {
+      error ("Can't find the file sections in `%s': %s", 
+	     bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
+    }
+
+  for (p = so -> sections; p < so -> sections_end; p++)
+    {
+      /* Relocate the section binding addresses as recorded in the shared
+	 object's file by the base address to which the object was actually
+	 mapped. */
+      p -> addr += (CORE_ADDR) LM_ADDR (so);
+      p -> endaddr += (CORE_ADDR) LM_ADDR (so);
+      so -> lmend = (CORE_ADDR) max (p -> endaddr, so -> lmend);
+      if (STREQ (p -> the_bfd_section -> name, ".text"))
+	{
+	  so -> textsection = p;
+	}
+    }
+
+  /* Free the file names, close the file now.  */
+  do_cleanups (old_chain);
+
+  return (1);
+}
+
+#ifndef SVR4_SHARED_LIBS
+
+/* Allocate the runtime common object file.  */
+
+static void
+allocate_rt_common_objfile ()
+{
+  struct objfile *objfile;
+  struct objfile *last_one;
+
+  objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
+  memset (objfile, 0, sizeof (struct objfile));
+  objfile -> md = NULL;
+  obstack_specify_allocation (&objfile -> psymbol_cache.cache, 0, 0,
+			      xmalloc, free);
+  obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0, xmalloc,
+			      free);
+  obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0, xmalloc,
+			      free);
+  obstack_specify_allocation (&objfile -> type_obstack, 0, 0, xmalloc,
+			      free);
+  objfile -> name = mstrsave (objfile -> md, "rt_common");
+
+  /* Add this file onto the tail of the linked list of other such files. */
+
+  objfile -> next = NULL;
+  if (object_files == NULL)
+    object_files = objfile;
+  else
+    {
+      for (last_one = object_files;
+	   last_one -> next;
+	   last_one = last_one -> next);
+      last_one -> next = objfile;
+    }
+
+  rt_common_objfile = objfile;
+}
+
+/* Read all dynamically loaded common symbol definitions from the inferior
+   and put them into the minimal symbol table for the runtime common
+   objfile.  */
+
+static void
+solib_add_common_symbols (rtc_symp)
+    struct rtc_symb *rtc_symp;
+{
+  struct rtc_symb inferior_rtc_symb;
+  struct nlist inferior_rtc_nlist;
+  int len;
+  char *name;
+
+  /* Remove any runtime common symbols from previous runs.  */
+
+  if (rt_common_objfile != NULL && rt_common_objfile -> minimal_symbol_count)
+    {
+      obstack_free (&rt_common_objfile -> symbol_obstack, 0);
+      obstack_specify_allocation (&rt_common_objfile -> symbol_obstack, 0, 0,
+				  xmalloc, free);
+      rt_common_objfile -> minimal_symbol_count = 0;
+      rt_common_objfile -> msymbols = NULL;
+    }
+
+  init_minimal_symbol_collection ();
+  make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  while (rtc_symp)
+    {
+      read_memory ((CORE_ADDR) rtc_symp,
+		   (char *) &inferior_rtc_symb,
+		   sizeof (inferior_rtc_symb));
+      read_memory ((CORE_ADDR) inferior_rtc_symb.rtc_sp,
+		   (char *) &inferior_rtc_nlist,
+		   sizeof(inferior_rtc_nlist));
+      if (inferior_rtc_nlist.n_type == N_COMM)
+	{
+	  /* FIXME: The length of the symbol name is not available, but in the
+	     current implementation the common symbol is allocated immediately
+	     behind the name of the symbol. */
+	  len = inferior_rtc_nlist.n_value - inferior_rtc_nlist.n_un.n_strx;
+
+	  name = xmalloc (len);
+	  read_memory ((CORE_ADDR) inferior_rtc_nlist.n_un.n_name, name, len);
+
+	  /* Allocate the runtime common objfile if necessary. */
+	  if (rt_common_objfile == NULL)
+	    allocate_rt_common_objfile ();
+
+	  prim_record_minimal_symbol (name, inferior_rtc_nlist.n_value,
+				      mst_bss, rt_common_objfile);
+	  free (name);
+	}
+      rtc_symp = inferior_rtc_symb.rtc_next;
+    }
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for the runtime common objfile.  */
+
+  install_minimal_symbols (rt_common_objfile);
+}
+
+#endif	/* SVR4_SHARED_LIBS */
+
+
+#ifdef SVR4_SHARED_LIBS
+
+static CORE_ADDR
+bfd_lookup_symbol PARAMS ((bfd *, char *));
+
+/*
+
+LOCAL FUNCTION
+
+	bfd_lookup_symbol -- lookup the value for a specific symbol
+
+SYNOPSIS
+
+	CORE_ADDR bfd_lookup_symbol (bfd *abfd, char *symname)
+
+DESCRIPTION
+
+	An expensive way to lookup the value of a single symbol for
+	bfd's that are only temporary anyway.  This is used by the
+	shared library support to find the address of the debugger
+	interface structures in the shared library.
+
+	Note that 0 is specifically allowed as an error return (no
+	such symbol).
+*/
+
+static CORE_ADDR
+bfd_lookup_symbol (abfd, symname)
+     bfd *abfd;
+     char *symname;
+{
+  unsigned int storage_needed;
+  asymbol *sym;
+  asymbol **symbol_table;
+  unsigned int number_of_symbols;
+  unsigned int i;
+  struct cleanup *back_to;
+  CORE_ADDR symaddr = 0;
+  
+  storage_needed = bfd_get_symtab_upper_bound (abfd);
+
+  if (storage_needed > 0)
+    {
+      symbol_table = (asymbol **) xmalloc (storage_needed);
+      back_to = make_cleanup (free, (PTR)symbol_table);
+      number_of_symbols = bfd_canonicalize_symtab (abfd, symbol_table); 
+  
+      for (i = 0; i < number_of_symbols; i++)
+	{
+	  sym = *symbol_table++;
+	  if (STREQ (sym -> name, symname))
+	    {
+	      /* Bfd symbols are section relative. */
+	      symaddr = sym -> value + sym -> section -> vma;
+	      break;
+	    }
+	}
+      do_cleanups (back_to);
+    }
+  return (symaddr);
+}
+
+#ifdef HANDLE_SVR4_EXEC_EMULATORS
+
+/*
+	Solaris BCP (the part of Solaris which allows it to run SunOS4
+	a.out files) throws in another wrinkle. Solaris does not fill
+	in the usual a.out link map structures when running BCP programs,
+	the only way to get at them is via groping around in the dynamic
+	linker.
+	The dynamic linker and it's structures are located in the shared
+	C library, which gets run as the executable's "interpreter" by
+	the kernel.
+
+	Note that we can assume nothing about the process state at the time
+	we need to find these structures.  We may be stopped on the first
+	instruction of the interpreter (C shared library), the first
+	instruction of the executable itself, or somewhere else entirely
+	(if we attached to the process for example).
+*/
+
+static char *debug_base_symbols[] = {
+  "r_debug",	/* Solaris 2.3 */
+  "_r_debug",	/* Solaris 2.1, 2.2 */
+  NULL
+};
+
+static int
+look_for_base PARAMS ((int, CORE_ADDR));
+
+/*
+
+LOCAL FUNCTION
+
+	look_for_base -- examine file for each mapped address segment
+
+SYNOPSYS
+
+	static int look_for_base (int fd, CORE_ADDR baseaddr)
+
+DESCRIPTION
+
+	This function is passed to proc_iterate_over_mappings, which
+	causes it to get called once for each mapped address space, with
+	an open file descriptor for the file mapped to that space, and the
+	base address of that mapped space.
+
+	Our job is to find the debug base symbol in the file that this
+	fd is open on, if it exists, and if so, initialize the dynamic
+	linker structure base address debug_base.
+
+	Note that this is a computationally expensive proposition, since
+	we basically have to open a bfd on every call, so we specifically
+	avoid opening the exec file.
+ */
+
+static int
+look_for_base (fd, baseaddr)
+     int fd;
+     CORE_ADDR baseaddr;
+{
+  bfd *interp_bfd;
+  CORE_ADDR address = 0;
+  char **symbolp;
+
+  /* If the fd is -1, then there is no file that corresponds to this
+     mapped memory segment, so skip it.  Also, if the fd corresponds
+     to the exec file, skip it as well. */
+
+  if (fd == -1
+      || (exec_bfd != NULL
+	  && fdmatch (fileno ((FILE *)(exec_bfd -> iostream)), fd)))
+    {
+      return (0);
+    }
+
+  /* Try to open whatever random file this fd corresponds to.  Note that
+     we have no way currently to find the filename.  Don't gripe about
+     any problems we might have, just fail. */
+
+  if ((interp_bfd = bfd_fdopenr ("unnamed", gnutarget, fd)) == NULL)
+    {
+      return (0);
+    }
+  if (!bfd_check_format (interp_bfd, bfd_object))
+    {
+      /* FIXME-leak: on failure, might not free all memory associated with
+	 interp_bfd.  */
+      bfd_close (interp_bfd);
+      return (0);
+    }
+
+  /* Now try to find our debug base symbol in this file, which we at
+     least know to be a valid ELF executable or shared library. */
+
+  for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++)
+    {
+      address = bfd_lookup_symbol (interp_bfd, *symbolp);
+      if (address != 0)
+	{
+	  break;
+	}
+    }
+  if (address == 0)
+    {
+      /* FIXME-leak: on failure, might not free all memory associated with
+	 interp_bfd.  */
+      bfd_close (interp_bfd);
+      return (0);
+    }
+
+  /* Eureka!  We found the symbol.  But now we may need to relocate it
+     by the base address.  If the symbol's value is less than the base
+     address of the shared library, then it hasn't yet been relocated
+     by the dynamic linker, and we have to do it ourself.  FIXME: Note
+     that we make the assumption that the first segment that corresponds
+     to the shared library has the base address to which the library
+     was relocated. */
+
+  if (address < baseaddr)
+    {
+      address += baseaddr;
+    }
+  debug_base = address;
+  /* FIXME-leak: on failure, might not free all memory associated with
+     interp_bfd.  */
+  bfd_close (interp_bfd);
+  return (1);
+}
+#endif /* HANDLE_SVR4_EXEC_EMULATORS */
+
+/*
+
+LOCAL FUNCTION
+
+	elf_locate_base -- locate the base address of dynamic linker structs
+	for SVR4 elf targets.
+
+SYNOPSIS
+
+	CORE_ADDR elf_locate_base (void)
+
+DESCRIPTION
+
+	For SVR4 elf targets the address of the dynamic linker's runtime
+	structure is contained within the dynamic info section in the
+	executable file.  The dynamic section is also mapped into the
+	inferior address space.  Because the runtime loader fills in the
+	real address before starting the inferior, we have to read in the
+	dynamic info section from the inferior address space.
+	If there are any errors while trying to find the address, we
+	silently return 0, otherwise the found address is returned.
+
+ */
+
+static CORE_ADDR
+elf_locate_base ()
+{
+  sec_ptr dyninfo_sect;
+  int dyninfo_sect_size;
+  CORE_ADDR dyninfo_addr;
+  char *buf;
+  char *bufend;
+
+  /* Find the start address of the .dynamic section.  */
+  dyninfo_sect = bfd_get_section_by_name (exec_bfd, ".dynamic");
+  if (dyninfo_sect == NULL)
+    return 0;
+  dyninfo_addr = bfd_section_vma (exec_bfd, dyninfo_sect);
+
+  /* Read in .dynamic section, silently ignore errors.  */
+  dyninfo_sect_size = bfd_section_size (exec_bfd, dyninfo_sect);
+  buf = alloca (dyninfo_sect_size);
+  if (target_read_memory (dyninfo_addr, buf, dyninfo_sect_size))
+    return 0;
+
+  /* Find the DT_DEBUG entry in the the .dynamic section.
+     For mips elf we look for DT_MIPS_RLD_MAP, mips elf apparently has
+     no DT_DEBUG entries.  */
+#ifndef TARGET_ELF64
+  for (bufend = buf + dyninfo_sect_size;
+       buf < bufend;
+       buf += sizeof (Elf32_External_Dyn))
+    {
+      Elf32_External_Dyn *x_dynp = (Elf32_External_Dyn *)buf;
+      long dyn_tag;
+      CORE_ADDR dyn_ptr;
+
+      dyn_tag = bfd_h_get_32 (exec_bfd, (bfd_byte *) x_dynp->d_tag);
+      if (dyn_tag == DT_NULL)
+	break;
+      else if (dyn_tag == DT_DEBUG)
+	{
+	  dyn_ptr = bfd_h_get_32 (exec_bfd, (bfd_byte *) x_dynp->d_un.d_ptr);
+	  return dyn_ptr;
+	}
+#ifdef DT_MIPS_RLD_MAP
+      else if (dyn_tag == DT_MIPS_RLD_MAP)
+	{
+	  char pbuf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+
+	  /* DT_MIPS_RLD_MAP contains a pointer to the address
+	     of the dynamic link structure.  */
+	  dyn_ptr = bfd_h_get_32 (exec_bfd, (bfd_byte *) x_dynp->d_un.d_ptr);
+	  if (target_read_memory (dyn_ptr, pbuf, sizeof (pbuf)))
+	    return 0;
+	  return extract_unsigned_integer (pbuf, sizeof (pbuf));
+	}
+#endif
+    }
+#else /* ELF64 */
+  for (bufend = buf + dyninfo_sect_size;
+       buf < bufend;
+       buf += sizeof (Elf64_External_Dyn))
+    {
+      Elf64_External_Dyn *x_dynp = (Elf64_External_Dyn *)buf;
+      long dyn_tag;
+      CORE_ADDR dyn_ptr;
+
+      dyn_tag = bfd_h_get_64 (exec_bfd, (bfd_byte *) x_dynp->d_tag);
+      if (dyn_tag == DT_NULL)
+	break;
+      else if (dyn_tag == DT_DEBUG)
+	{
+	  dyn_ptr = bfd_h_get_64 (exec_bfd, (bfd_byte *) x_dynp->d_un.d_ptr);
+	  return dyn_ptr;
+	}
+    }
+#endif
+
+  /* DT_DEBUG entry not found.  */
+  return 0;
+}
+
+#endif	/* SVR4_SHARED_LIBS */
+
+/*
+
+LOCAL FUNCTION
+
+	locate_base -- locate the base address of dynamic linker structs
+
+SYNOPSIS
+
+	CORE_ADDR locate_base (void)
+
+DESCRIPTION
+
+	For both the SunOS and SVR4 shared library implementations, if the
+	inferior executable has been linked dynamically, there is a single
+	address somewhere in the inferior's data space which is the key to
+	locating all of the dynamic linker's runtime structures.  This
+	address is the value of the debug base symbol.  The job of this
+	function is to find and return that address, or to return 0 if there
+	is no such address (the executable is statically linked for example).
+
+	For SunOS, the job is almost trivial, since the dynamic linker and
+	all of it's structures are statically linked to the executable at
+	link time.  Thus the symbol for the address we are looking for has
+	already been added to the minimal symbol table for the executable's
+	objfile at the time the symbol file's symbols were read, and all we
+	have to do is look it up there.  Note that we explicitly do NOT want
+	to find the copies in the shared library.
+
+	The SVR4 version is a bit more complicated because the address
+	is contained somewhere in the dynamic info section.  We have to go
+	to a lot more work to discover the address of the debug base symbol.
+	Because of this complexity, we cache the value we find and return that
+	value on subsequent invocations.  Note there is no copy in the
+	executable symbol tables.
+
+ */
+
+static CORE_ADDR
+locate_base ()
+{
+
+#ifndef SVR4_SHARED_LIBS
+
+  struct minimal_symbol *msymbol;
+  CORE_ADDR address = 0;
+  char **symbolp;
+
+  /* For SunOS, we want to limit the search for the debug base symbol to the
+     executable being debugged, since there is a duplicate named symbol in the
+     shared library.  We don't want the shared library versions. */
+
+  for (symbolp = debug_base_symbols; *symbolp != NULL; symbolp++)
+    {
+      msymbol = lookup_minimal_symbol (*symbolp, NULL, symfile_objfile);
+      if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
+	{
+	  address = SYMBOL_VALUE_ADDRESS (msymbol);
+	  return (address);
+	}
+    }
+  return (0);
+
+#else	/* SVR4_SHARED_LIBS */
+
+  /* Check to see if we have a currently valid address, and if so, avoid
+     doing all this work again and just return the cached address.  If
+     we have no cached address, try to locate it in the dynamic info
+     section for ELF executables.  */
+
+  if (debug_base == 0)
+    {
+      if (exec_bfd != NULL
+	  && bfd_get_flavour (exec_bfd) == bfd_target_elf_flavour)
+	debug_base = elf_locate_base ();
+#ifdef HANDLE_SVR4_EXEC_EMULATORS
+      /* Try it the hard way for emulated executables.  */
+      else if (inferior_pid != 0 && target_has_execution)
+	proc_iterate_over_mappings (look_for_base);
+#endif
+    }
+  return (debug_base);
+
+#endif	/* !SVR4_SHARED_LIBS */
+
+}
+
+/*
+
+LOCAL FUNCTION
+
+	first_link_map_member -- locate first member in dynamic linker's map
+
+SYNOPSIS
+
+	static struct link_map *first_link_map_member (void)
+
+DESCRIPTION
+
+	Read in a copy of the first member in the inferior's dynamic
+	link map from the inferior's dynamic linker structures, and return
+	a pointer to the copy in our address space.
+*/
+
+static struct link_map *
+first_link_map_member ()
+{
+  struct link_map *lm = NULL;
+
+#ifndef SVR4_SHARED_LIBS
+
+  read_memory (debug_base, (char *) &dynamic_copy, sizeof (dynamic_copy));
+  if (dynamic_copy.ld_version >= 2)
+    {
+      /* It is a version that we can deal with, so read in the secondary
+	 structure and find the address of the link map list from it. */
+      read_memory ((CORE_ADDR) dynamic_copy.ld_un.ld_2, (char *) &ld_2_copy,
+		   sizeof (struct link_dynamic_2));
+      lm = ld_2_copy.ld_loaded;
+    }
+
+#else	/* SVR4_SHARED_LIBS */
+
+  read_memory (debug_base, (char *) &debug_copy, sizeof (struct r_debug));
+  /* FIXME:  Perhaps we should validate the info somehow, perhaps by
+     checking r_version for a known version number, or r_state for
+     RT_CONSISTENT. */
+  lm = debug_copy.r_map;
+
+#endif	/* !SVR4_SHARED_LIBS */
+
+  return (lm);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	find_solib -- step through list of shared objects
+
+SYNOPSIS
+
+	struct so_list *find_solib (struct so_list *so_list_ptr)
+
+DESCRIPTION
+
+	This module contains the routine which finds the names of any
+	loaded "images" in the current process. The argument in must be
+	NULL on the first call, and then the returned value must be passed
+	in on subsequent calls. This provides the capability to "step" down
+	the list of loaded objects. On the last object, a NULL value is
+	returned.
+
+	The arg and return value are "struct link_map" pointers, as defined
+	in <link.h>.
+ */
+
+static struct so_list *
+find_solib (so_list_ptr)
+     struct so_list *so_list_ptr;	/* Last lm or NULL for first one */
+{
+  struct so_list *so_list_next = NULL;
+  struct link_map *lm = NULL;
+  struct so_list *new;
+  
+  if (so_list_ptr == NULL)
+    {
+      /* We are setting up for a new scan through the loaded images. */
+      if ((so_list_next = so_list_head) == NULL)
+	{
+	  /* We have not already read in the dynamic linking structures
+	     from the inferior, lookup the address of the base structure. */
+	  debug_base = locate_base ();
+	  if (debug_base != 0)
+	    {
+	      /* Read the base structure in and find the address of the first
+		 link map list member. */
+	      lm = first_link_map_member ();
+	    }
+	}
+    }
+  else
+    {
+      /* We have been called before, and are in the process of walking
+	 the shared library list.  Advance to the next shared object. */
+      if ((lm = LM_NEXT (so_list_ptr)) == NULL)
+	{
+	  /* We have hit the end of the list, so check to see if any were
+	     added, but be quiet if we can't read from the target any more. */
+	  int status = target_read_memory ((CORE_ADDR) so_list_ptr -> lmaddr,
+					   (char *) &(so_list_ptr -> lm),
+					   sizeof (struct link_map));
+	  if (status == 0)
+	    {
+	      lm = LM_NEXT (so_list_ptr);
+	    }
+	  else
+	    {
+	      lm = NULL;
+	    }
+	}
+      so_list_next = so_list_ptr -> next;
+    }
+  if ((so_list_next == NULL) && (lm != NULL))
+    {
+      /* Get next link map structure from inferior image and build a local
+	 abbreviated load_map structure */
+      new = (struct so_list *) xmalloc (sizeof (struct so_list));
+      memset ((char *) new, 0, sizeof (struct so_list));
+      new -> lmaddr = lm;
+      /* Add the new node as the next node in the list, or as the root
+	 node if this is the first one. */
+      if (so_list_ptr != NULL)
+	{
+	  so_list_ptr -> next = new;
+	}
+      else
+	{
+	  so_list_head = new;
+
+	  if (! solib_cleanup_queued)
+	    {
+	      make_run_cleanup (do_clear_solib, NULL);
+	      solib_cleanup_queued = 1;
+	    }
+	  
+	}      
+      so_list_next = new;
+      read_memory ((CORE_ADDR) lm, (char *) &(new -> lm),
+		   sizeof (struct link_map));
+      /* For SVR4 versions, the first entry in the link map is for the
+	 inferior executable, so we must ignore it.  For some versions of
+	 SVR4, it has no name.  For others (Solaris 2.3 for example), it
+	 does have a name, so we can no longer use a missing name to
+	 decide when to ignore it. */
+      if (!IGNORE_FIRST_LINK_MAP_ENTRY (new -> lm))
+	{
+	  int errcode;
+	  char *buffer;
+	  target_read_string ((CORE_ADDR) LM_NAME (new), &buffer,
+			      MAX_PATH_SIZE - 1, &errcode);
+	  if (errcode != 0)
+	    {
+	      warning ("find_solib: Can't read pathname for load map: %s\n",
+		       safe_strerror (errcode));
+	      return (so_list_next);
+	    }
+	  strncpy (new -> so_name, buffer, MAX_PATH_SIZE - 1);
+	  new -> so_name[MAX_PATH_SIZE - 1] = '\0';
+	  free (buffer);
+	  catch_errors (solib_map_sections, new,
+			"Error while mapping shared library sections:\n",
+			RETURN_MASK_ALL);
+	}      
+    }
+  return (so_list_next);
+}
+
+/* A small stub to get us past the arg-passing pinhole of catch_errors.  */
+
+static int
+symbol_add_stub (arg)
+     PTR arg;
+{
+  register struct so_list *so = (struct so_list *) arg;	/* catch_errs bogon */
+  CORE_ADDR text_addr = 0;
+
+  if (so -> textsection)
+    text_addr = so -> textsection -> addr;
+  else if (so -> abfd != NULL)
+    {
+      asection *lowest_sect;
+
+      /* If we didn't find a mapped non zero sized .text section, set up
+	 text_addr so that the relocation in symbol_file_add does no harm.  */
+
+      lowest_sect = bfd_get_section_by_name (so -> abfd, ".text");
+      if (lowest_sect == NULL)
+	bfd_map_over_sections (so -> abfd, find_lowest_section,
+			       (PTR) &lowest_sect);
+      if (lowest_sect)
+	text_addr = bfd_section_vma (so -> abfd, lowest_sect)
+		    + (CORE_ADDR) LM_ADDR (so);
+    }
+  
+  ALL_OBJFILES (so -> objfile)
+    {
+      if (strcmp (so -> objfile -> name, so -> so_name) == 0)
+	return 1;
+    }
+  so -> objfile =
+    symbol_file_add (so -> so_name, so -> from_tty,
+		     text_addr,
+		     0, 0, 0, 0, 1);
+  return (1);
+}
+
+/* This function will check the so name to see if matches the main list.
+   In some system the main object is in the list, which we want to exclude */
+
+static int match_main (soname)
+    char *soname;
+{
+  char **mainp;
+
+  for (mainp = main_name_list; *mainp != NULL; mainp++)
+    {
+      if (strcmp (soname, *mainp) == 0)
+	return (1);
+    }
+
+  return (0);
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_add -- add a shared library file to the symtab and section list
+
+SYNOPSIS
+
+	void solib_add (char *arg_string, int from_tty,
+			struct target_ops *target)
+
+DESCRIPTION
+
+*/
+
+void
+solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{	
+  register struct so_list *so = NULL;   	/* link map state variable */
+
+  /* Last shared library that we read.  */
+  struct so_list *so_last = NULL;
+
+  char *re_err;
+  int count;
+  int old;
+  
+  if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
+    {
+      error ("Invalid regexp: %s", re_err);
+    }
+  
+  /* Add the shared library sections to the section table of the
+     specified target, if any.  */
+  if (target)
+    {
+      /* Count how many new section_table entries there are.  */
+      so = NULL;
+      count = 0;
+      while ((so = find_solib (so)) != NULL)
+	{
+	  if (so -> so_name[0] && !match_main (so -> so_name))
+	    {
+	      count += so -> sections_end - so -> sections;
+	    }
+	}
+      
+      if (count)
+	{
+	  int update_coreops;
+
+	  /* We must update the to_sections field in the core_ops structure
+	     here, otherwise we dereference a potential dangling pointer
+	     for each call to target_read/write_memory within this routine.  */
+	  update_coreops = core_ops.to_sections == target->to_sections;
+          	     
+	  /* Reallocate the target's section table including the new size.  */
+	  if (target -> to_sections)
+	    {
+	      old = target -> to_sections_end - target -> to_sections;
+	      target -> to_sections = (struct section_table *)
+		xrealloc ((char *)target -> to_sections,
+			 (sizeof (struct section_table)) * (count + old));
+	    }
+	  else
+	    {
+	      old = 0;
+	      target -> to_sections = (struct section_table *)
+		xmalloc ((sizeof (struct section_table)) * count);
+	    }
+	  target -> to_sections_end = target -> to_sections + (count + old);
+	  
+	  /* Update the to_sections field in the core_ops structure
+	     if needed.  */
+	  if (update_coreops)
+	    {
+	      core_ops.to_sections = target->to_sections;
+	      core_ops.to_sections_end = target->to_sections_end;
+	    }
+
+	  /* Add these section table entries to the target's table.  */
+	  while ((so = find_solib (so)) != NULL)
+	    {
+	      if (so -> so_name[0])
+		{
+		  count = so -> sections_end - so -> sections;
+		  memcpy ((char *) (target -> to_sections + old),
+			  so -> sections, 
+			  (sizeof (struct section_table)) * count);
+		  old += count;
+		}
+	    }
+	}
+    }
+  
+  /* Now add the symbol files.  */
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0] && re_exec (so -> so_name) && 
+      !match_main (so -> so_name))
+	{
+	  so -> from_tty = from_tty;
+	  if (so -> symbols_loaded)
+	    {
+	      if (from_tty)
+		{
+		  printf_unfiltered ("Symbols already loaded for %s\n", so -> so_name);
+		}
+	    }
+	  else if (catch_errors
+		   (symbol_add_stub, so,
+		    "Error while reading shared library symbols:\n",
+		    RETURN_MASK_ALL))
+	    {
+	      so_last = so;
+	      so -> symbols_loaded = 1;
+	    }
+	}
+    }
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  if (so_last)
+    reinit_frame_cache ();
+
+  if (so_last)
+    special_symbol_handling (so_last);
+}
+
+/*
+
+LOCAL FUNCTION
+
+	info_sharedlibrary_command -- code for "info sharedlibrary"
+
+SYNOPSIS
+
+	static void info_sharedlibrary_command ()
+
+DESCRIPTION
+
+	Walk through the shared library list and print information
+	about each attached library.
+*/
+
+static void
+info_sharedlibrary_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct so_list *so = NULL;  	/* link map state variable */
+  int header_done = 0;
+  int addr_width;
+  char *addr_fmt;
+
+  if (exec_bfd == NULL)
+    {
+      printf_unfiltered ("No exec file.\n");
+      return;
+    }
+
+#ifndef TARGET_ELF64
+  addr_width = 8+4;
+  addr_fmt = "08l";
+#else
+  addr_width = 16+4;
+  addr_fmt = "016l";
+#endif
+
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0])
+	{
+	  if (!header_done)
+	    {
+	      printf_unfiltered("%-*s%-*s%-12s%s\n", addr_width, "From",
+				addr_width, "To", "Syms Read",
+				"Shared Object Library");
+	      header_done++;
+	    }
+
+	  printf_unfiltered ("%-*s", addr_width,
+		  local_hex_string_custom ((unsigned long) LM_ADDR (so),
+					   addr_fmt));
+	  printf_unfiltered ("%-*s", addr_width,
+		  local_hex_string_custom ((unsigned long) so -> lmend,
+					   addr_fmt));
+	  printf_unfiltered ("%-12s", so -> symbols_loaded ? "Yes" : "No");
+	  printf_unfiltered ("%s\n",  so -> so_name);
+	}
+    }
+  if (so_list_head == NULL)
+    {
+      printf_unfiltered ("No shared libraries loaded at this time.\n");	
+    }
+}
+
+/*
+
+GLOBAL FUNCTION
+
+	solib_address -- check to see if an address is in a shared lib
+
+SYNOPSIS
+
+	char * solib_address (CORE_ADDR address)
+
+DESCRIPTION
+
+	Provides a hook for other gdb routines to discover whether or
+	not a particular address is within the mapped address space of
+	a shared library.  Any address between the base mapping address
+	and the first address beyond the end of the last mapping, is
+	considered to be within the shared library address space, for
+	our purposes.
+
+	For example, this routine is called at one point to disable
+	breakpoints which are in shared libraries that are not currently
+	mapped in.
+ */
+
+char *
+solib_address (address)
+     CORE_ADDR address;
+{
+  register struct so_list *so = 0;   	/* link map state variable */
+  
+  while ((so = find_solib (so)) != NULL)
+    {
+      if (so -> so_name[0])
+	{
+	  if ((address >= (CORE_ADDR) LM_ADDR (so)) &&
+	      (address < (CORE_ADDR) so -> lmend))
+	    return (so->so_name);
+	}
+    }
+  return (0);
+}
+
+/* Called by free_all_symtabs */
+
+void 
+clear_solib()
+{
+  struct so_list *next;
+  char *bfd_filename;
+  
+  while (so_list_head)
+    {
+      if (so_list_head -> sections)
+	{
+	  free ((PTR)so_list_head -> sections);
+	}
+      if (so_list_head -> abfd)
+	{
+	  bfd_filename = bfd_get_filename (so_list_head -> abfd);
+	  if (!bfd_close (so_list_head -> abfd))
+	    warning ("cannot close \"%s\": %s",
+		     bfd_filename, bfd_errmsg (bfd_get_error ()));
+	}
+      else
+	/* This happens for the executable on SVR4.  */
+	bfd_filename = NULL;
+
+      next = so_list_head -> next;
+      if (bfd_filename)
+	free ((PTR)bfd_filename);
+      free ((PTR)so_list_head);
+      so_list_head = next;
+    }
+  debug_base = 0;
+}
+
+static void
+do_clear_solib (dummy)
+     PTR dummy;
+{
+  solib_cleanup_queued = 0;
+  clear_solib ();
+}
+
+#ifdef SVR4_SHARED_LIBS
+
+/* Return 1 if PC lies in the dynamic symbol resolution code of the
+   SVR4 run time loader.  */
+
+static CORE_ADDR interp_text_sect_low;
+static CORE_ADDR interp_text_sect_high;
+static CORE_ADDR interp_plt_sect_low;
+static CORE_ADDR interp_plt_sect_high;
+
+int
+in_svr4_dynsym_resolve_code (pc)
+     CORE_ADDR pc;
+{
+  return ((pc >= interp_text_sect_low && pc < interp_text_sect_high)
+	  || (pc >= interp_plt_sect_low && pc < interp_plt_sect_high)
+	  || in_plt_section (pc, NULL));
+}
+#endif
+
+/*
+
+LOCAL FUNCTION
+
+	disable_break -- remove the "mapping changed" breakpoint
+
+SYNOPSIS
+
+	static int disable_break ()
+
+DESCRIPTION
+
+	Removes the breakpoint that gets hit when the dynamic linker
+	completes a mapping change.
+
+*/
+
+#ifndef SVR4_SHARED_LIBS
+
+static int
+disable_break ()
+{
+  int status = 1;
+
+#ifndef SVR4_SHARED_LIBS
+
+  int in_debugger = 0;
+  
+  /* Read the debugger structure from the inferior to retrieve the
+     address of the breakpoint and the original contents of the
+     breakpoint address.  Remove the breakpoint by writing the original
+     contents back. */
+
+  read_memory (debug_addr, (char *) &debug_copy, sizeof (debug_copy));
+
+  /* Set `in_debugger' to zero now. */
+
+  write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger));
+
+  breakpoint_addr = (CORE_ADDR) debug_copy.ldd_bp_addr;
+  write_memory (breakpoint_addr, (char *) &debug_copy.ldd_bp_inst,
+		sizeof (debug_copy.ldd_bp_inst));
+
+#else	/* SVR4_SHARED_LIBS */
+
+  /* Note that breakpoint address and original contents are in our address
+     space, so we just need to write the original contents back. */
+
+  if (memory_remove_breakpoint (breakpoint_addr, shadow_contents) != 0)
+    {
+      status = 0;
+    }
+
+#endif	/* !SVR4_SHARED_LIBS */
+
+  /* For the SVR4 version, we always know the breakpoint address.  For the
+     SunOS version we don't know it until the above code is executed.
+     Grumble if we are stopped anywhere besides the breakpoint address. */
+
+  if (stop_pc != breakpoint_addr)
+    {
+      warning ("stopped at unknown breakpoint while handling shared libraries");
+    }
+
+  return (status);
+}
+
+#endif	/* #ifdef SVR4_SHARED_LIBS */
+
+/*
+
+LOCAL FUNCTION
+
+	enable_break -- arrange for dynamic linker to hit breakpoint
+
+SYNOPSIS
+
+	int enable_break (void)
+
+DESCRIPTION
+
+	Both the SunOS and the SVR4 dynamic linkers have, as part of their
+	debugger interface, support for arranging for the inferior to hit
+	a breakpoint after mapping in the shared libraries.  This function
+	enables that breakpoint.
+
+	For SunOS, there is a special flag location (in_debugger) which we
+	set to 1.  When the dynamic linker sees this flag set, it will set
+	a breakpoint at a location known only to itself, after saving the
+	original contents of that place and the breakpoint address itself,
+	in it's own internal structures.  When we resume the inferior, it
+	will eventually take a SIGTRAP when it runs into the breakpoint.
+	We handle this (in a different place) by restoring the contents of
+	the breakpointed location (which is only known after it stops),
+	chasing around to locate the shared libraries that have been
+	loaded, then resuming.
+
+	For SVR4, the debugger interface structure contains a member (r_brk)
+	which is statically initialized at the time the shared library is
+	built, to the offset of a function (_r_debug_state) which is guaran-
+	teed to be called once before mapping in a library, and again when
+	the mapping is complete.  At the time we are examining this member,
+	it contains only the unrelocated offset of the function, so we have
+	to do our own relocation.  Later, when the dynamic linker actually
+	runs, it relocates r_brk to be the actual address of _r_debug_state().
+
+	The debugger interface structure also contains an enumeration which
+	is set to either RT_ADD or RT_DELETE prior to changing the mapping,
+	depending upon whether or not the library is being mapped or unmapped,
+	and then set to RT_CONSISTENT after the library is mapped/unmapped.
+*/
+
+static int
+enable_break ()
+{
+  int success = 0;
+
+#ifndef SVR4_SHARED_LIBS
+
+  int j;
+  int in_debugger;
+
+  /* Get link_dynamic structure */
+
+  j = target_read_memory (debug_base, (char *) &dynamic_copy,
+			  sizeof (dynamic_copy));
+  if (j)
+    {
+      /* unreadable */
+      return (0);
+    }
+
+  /* Calc address of debugger interface structure */
+
+  debug_addr = (CORE_ADDR) dynamic_copy.ldd;
+
+  /* Calc address of `in_debugger' member of debugger interface structure */
+
+  flag_addr = debug_addr + (CORE_ADDR) ((char *) &debug_copy.ldd_in_debugger -
+					(char *) &debug_copy);
+
+  /* Write a value of 1 to this member.  */
+
+  in_debugger = 1;
+  write_memory (flag_addr, (char *) &in_debugger, sizeof (in_debugger));
+  success = 1;
+
+#else	/* SVR4_SHARED_LIBS */
+
+#ifdef BKPT_AT_SYMBOL
+
+  struct minimal_symbol *msymbol;
+  char **bkpt_namep;
+  asection *interp_sect;
+
+  /* First, remove all the solib event breakpoints.  Their addresses
+     may have changed since the last time we ran the program.  */
+  remove_solib_event_breakpoints ();
+
+#ifdef SVR4_SHARED_LIBS
+  interp_text_sect_low = interp_text_sect_high = 0;
+  interp_plt_sect_low = interp_plt_sect_high = 0;
+
+  /* Find the .interp section; if not found, warn the user and drop
+     into the old breakpoint at symbol code.  */
+  interp_sect = bfd_get_section_by_name (exec_bfd, ".interp");
+  if (interp_sect)
+    {
+      unsigned int interp_sect_size;
+      char *buf;
+      CORE_ADDR load_addr;
+      bfd *tmp_bfd;
+      CORE_ADDR sym_addr = 0;
+
+      /* Read the contents of the .interp section into a local buffer;
+	 the contents specify the dynamic linker this program uses.  */
+      interp_sect_size = bfd_section_size (exec_bfd, interp_sect);
+      buf = alloca (interp_sect_size);
+      bfd_get_section_contents (exec_bfd, interp_sect,
+				buf, 0, interp_sect_size);
+
+      /* Now we need to figure out where the dynamic linker was
+	 loaded so that we can load its symbols and place a breakpoint
+	 in the dynamic linker itself.
+
+	 This address is stored on the stack.  However, I've been unable
+	 to find any magic formula to find it for Solaris (appears to
+	 be trivial on GNU/Linux).  Therefore, we have to try an alternate
+	 mechanism to find the dynamic linker's base address.  */
+      tmp_bfd = bfd_openr (buf, gnutarget);
+      if (tmp_bfd == NULL)
+	goto bkpt_at_symbol;
+
+      /* Make sure the dynamic linker's really a useful object.  */
+      if (!bfd_check_format (tmp_bfd, bfd_object))
+	{
+	  warning ("Unable to grok dynamic linker %s as an object file", buf);
+	  bfd_close (tmp_bfd);
+	  goto bkpt_at_symbol;
+	}
+
+      /* We find the dynamic linker's base address by examining the
+	 current pc (which point at the entry point for the dynamic
+	 linker) and subtracting the offset of the entry point.  */
+      load_addr = read_pc () - tmp_bfd->start_address;
+
+      /* Record the relocated start and end address of the dynamic linker
+	 text and plt section for in_svr4_dynsym_resolve_code.  */
+      interp_sect = bfd_get_section_by_name (tmp_bfd, ".text");
+      if (interp_sect)
+	{
+	  interp_text_sect_low =
+	    bfd_section_vma (tmp_bfd, interp_sect) + load_addr;
+	  interp_text_sect_high =
+	    interp_text_sect_low + bfd_section_size (tmp_bfd, interp_sect);
+	}
+      interp_sect = bfd_get_section_by_name (tmp_bfd, ".plt");
+      if (interp_sect)
+	{
+	  interp_plt_sect_low =
+	    bfd_section_vma (tmp_bfd, interp_sect) + load_addr;
+	  interp_plt_sect_high =
+	    interp_plt_sect_low + bfd_section_size (tmp_bfd, interp_sect);
+	}
+
+      /* Now try to set a breakpoint in the dynamic linker.  */
+      for (bkpt_namep = solib_break_names; *bkpt_namep != NULL; bkpt_namep++)
+	{
+	  sym_addr = bfd_lookup_symbol (tmp_bfd, *bkpt_namep);
+	  if (sym_addr != 0)
+	    break;
+	}
+
+      /* We're done with the temporary bfd.  */
+      bfd_close (tmp_bfd);
+
+      if (sym_addr != 0)
+	{
+	  create_solib_event_breakpoint (load_addr + sym_addr);
+	  return 1;
+	}
+
+      /* For whatever reason we couldn't set a breakpoint in the dynamic
+	 linker.  Warn and drop into the old code.  */
+bkpt_at_symbol:
+      warning ("Unable to find dynamic linker breakpoint function.\nGDB will be unable to debug shared library initializers\nand track explicitly loaded dynamic code.");
+    }
+#endif
+
+  /* Scan through the list of symbols, trying to look up the symbol and
+     set a breakpoint there.  Terminate loop when we/if we succeed. */
+
+  breakpoint_addr = 0;
+  for (bkpt_namep = bkpt_names; *bkpt_namep != NULL; bkpt_namep++)
+    {
+      msymbol = lookup_minimal_symbol (*bkpt_namep, NULL, symfile_objfile);
+      if ((msymbol != NULL) && (SYMBOL_VALUE_ADDRESS (msymbol) != 0))
+	{
+	  create_solib_event_breakpoint (SYMBOL_VALUE_ADDRESS (msymbol));
+	  return 1;
+	}
+    }
+
+  /* Nothing good happened.  */
+  success = 0;
+
+#endif	/* BKPT_AT_SYMBOL */
+
+#endif	/* !SVR4_SHARED_LIBS */
+
+  return (success);
+}
+  
+/*
+  
+GLOBAL FUNCTION
+  
+	solib_create_inferior_hook -- shared library startup support
+  
+SYNOPSIS
+  
+	void solib_create_inferior_hook()
+  
+DESCRIPTION
+  
+	When gdb starts up the inferior, it nurses it along (through the
+	shell) until it is ready to execute it's first instruction.  At this
+	point, this function gets called via expansion of the macro
+	SOLIB_CREATE_INFERIOR_HOOK.
+
+	For SunOS executables, this first instruction is typically the
+	one at "_start", or a similar text label, regardless of whether
+	the executable is statically or dynamically linked.  The runtime
+	startup code takes care of dynamically linking in any shared
+	libraries, once gdb allows the inferior to continue.
+
+	For SVR4 executables, this first instruction is either the first
+	instruction in the dynamic linker (for dynamically linked
+	executables) or the instruction at "start" for statically linked
+	executables.  For dynamically linked executables, the system
+	first exec's /lib/libc.so.N, which contains the dynamic linker,
+	and starts it running.  The dynamic linker maps in any needed
+	shared libraries, maps in the actual user executable, and then
+	jumps to "start" in the user executable.
+
+	For both SunOS shared libraries, and SVR4 shared libraries, we
+	can arrange to cooperate with the dynamic linker to discover the
+	names of shared libraries that are dynamically linked, and the
+	base addresses to which they are linked.
+
+	This function is responsible for discovering those names and
+	addresses, and saving sufficient information about them to allow
+	their symbols to be read at a later time.
+
+FIXME
+
+	Between enable_break() and disable_break(), this code does not
+	properly handle hitting breakpoints which the user might have
+	set in the startup code or in the dynamic linker itself.  Proper
+	handling will probably have to wait until the implementation is
+	changed to use the "breakpoint handler function" method.
+
+	Also, what if child has exit()ed?  Must exit loop somehow.
+  */
+
+void 
+solib_create_inferior_hook()
+{
+  /* If we are using the BKPT_AT_SYMBOL code, then we don't need the base
+     yet.  In fact, in the case of a SunOS4 executable being run on
+     Solaris, we can't get it yet.  find_solib will get it when it needs
+     it.  */
+#if !(defined (SVR4_SHARED_LIBS) && defined (BKPT_AT_SYMBOL))
+  if ((debug_base = locate_base ()) == 0)
+    {
+      /* Can't find the symbol or the executable is statically linked. */
+      return;
+    }
+#endif
+
+  if (!enable_break ())
+    {
+      warning ("shared library handler failed to enable breakpoint");
+      return;
+    }
+
+#if !defined(SVR4_SHARED_LIBS) || defined(_SCO_DS)
+  /* SCO and SunOS need the loop below, other systems should be using the
+     special shared library breakpoints and the shared library breakpoint
+     service routine.
+
+     Now run the target.  It will eventually hit the breakpoint, at
+     which point all of the libraries will have been mapped in and we
+     can go groveling around in the dynamic linker structures to find
+     out what we need to know about them. */
+
+  clear_proceed_status ();
+  stop_soon_quietly = 1;
+  stop_signal = TARGET_SIGNAL_0;
+  do
+    {
+      target_resume (-1, 0, stop_signal);
+      wait_for_inferior ();
+    }
+  while (stop_signal != TARGET_SIGNAL_TRAP);
+  stop_soon_quietly = 0;
+
+#if !defined(_SCO_DS)
+  /* We are now either at the "mapping complete" breakpoint (or somewhere
+     else, a condition we aren't prepared to deal with anyway), so adjust
+     the PC as necessary after a breakpoint, disable the breakpoint, and
+     add any shared libraries that were mapped in. */
+
+  if (DECR_PC_AFTER_BREAK)
+    {
+      stop_pc -= DECR_PC_AFTER_BREAK;
+      write_register (PC_REGNUM, stop_pc);
+    }
+
+  if (!disable_break ())
+    {
+      warning ("shared library handler failed to disable breakpoint");
+    }
+
+  if (auto_solib_add)
+    solib_add ((char *) 0, 0, (struct target_ops *) 0);
+#endif /* ! _SCO_DS */
+#endif
+}
+
+/*
+
+LOCAL FUNCTION
+
+	special_symbol_handling -- additional shared library symbol handling
+
+SYNOPSIS
+
+	void special_symbol_handling (struct so_list *so)
+
+DESCRIPTION
+
+	Once the symbols from a shared object have been loaded in the usual
+	way, we are called to do any system specific symbol handling that 
+	is needed.
+
+	For SunOS4, this consists of grunging around in the dynamic
+	linkers structures to find symbol definitions for "common" symbols
+	and adding them to the minimal symbol table for the runtime common
+	objfile.
+
+*/
+
+static void
+special_symbol_handling (so)
+struct so_list *so;
+{
+#ifndef SVR4_SHARED_LIBS
+  int j;
+
+  if (debug_addr == 0)
+    {
+      /* Get link_dynamic structure */
+
+      j = target_read_memory (debug_base, (char *) &dynamic_copy,
+			      sizeof (dynamic_copy));
+      if (j)
+	{
+	  /* unreadable */
+	  return;
+	}
+
+      /* Calc address of debugger interface structure */
+      /* FIXME, this needs work for cross-debugging of core files
+	 (byteorder, size, alignment, etc).  */
+
+      debug_addr = (CORE_ADDR) dynamic_copy.ldd;
+    }
+
+  /* Read the debugger structure from the inferior, just to make sure
+     we have a current copy. */
+
+  j = target_read_memory (debug_addr, (char *) &debug_copy,
+			  sizeof (debug_copy));
+  if (j)
+    return;		/* unreadable */
+
+  /* Get common symbol definitions for the loaded object. */
+
+  if (debug_copy.ldd_cp)
+    {
+      solib_add_common_symbols (debug_copy.ldd_cp);
+    }
+
+#endif	/* !SVR4_SHARED_LIBS */
+}
+
+
+/*
+
+LOCAL FUNCTION
+
+	sharedlibrary_command -- handle command to explicitly add library
+
+SYNOPSIS
+
+	static void sharedlibrary_command (char *args, int from_tty)
+
+DESCRIPTION
+
+*/
+
+static void
+sharedlibrary_command (args, from_tty)
+char *args;
+int from_tty;
+{
+  dont_repeat ();
+  solib_add (args, from_tty, (struct target_ops *) 0);
+}
+
+#endif /* HAVE_LINK_H */
+
+void
+_initialize_solib()
+{
+#ifdef HAVE_LINK_H
+
+  add_com ("sharedlibrary", class_files, sharedlibrary_command,
+	   "Load shared object library symbols for files matching REGEXP.");
+  add_info ("sharedlibrary", info_sharedlibrary_command, 
+	    "Status of loaded shared object libraries.");
+
+  add_show_from_set
+    (add_set_cmd ("auto-solib-add", class_support, var_zinteger,
+		  (char *) &auto_solib_add,
+		  "Set autoloading of shared library symbols.\n\
+If nonzero, symbols from all shared object libraries will be loaded\n\
+automatically when the inferior begins execution or when the dynamic linker\n\
+informs gdb that a new library has been loaded.  Otherwise, symbols\n\
+must be loaded manually, using `sharedlibrary'.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("solib-absolute-prefix", class_support, var_filename,
+		  (char *) &solib_absolute_prefix,
+		  "Set prefix for loading absolute shared library symbol files.\n\
+For other (relative) files, you can add values using `set solib-search-path'.",
+		  &setlist),
+     &showlist);
+  add_show_from_set
+    (add_set_cmd ("solib-search-path", class_support, var_string,
+		  (char *) &solib_search_path,
+		  "Set the search path for loading non-absolute shared library symbol files.\n\
+This takes precedence over the environment variables PATH and LD_LIBRARY_PATH.",
+		  &setlist),
+     &showlist);
+
+#endif /* HAVE_LINK_H */
+}
diff --git a/gdb/solib.h b/gdb/solib.h
new file mode 100644
index 0000000..eafef48
--- /dev/null
+++ b/gdb/solib.h
@@ -0,0 +1,203 @@
+/* Shared library declarations for GDB, the GNU Debugger.
+   Copyright (C) 1992, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct target_ops;
+#endif
+
+/* Called when we free all symtabs, to free the shared library information
+   as well. */
+
+#define CLEAR_SOLIB			clear_solib
+
+extern void
+clear_solib PARAMS ((void));
+
+/* Called to add symbols from a shared library to gdb's symbol table. */
+
+#define SOLIB_ADD(filename, from_tty, targ) \
+    solib_add (filename, from_tty, targ)
+
+extern void
+solib_add PARAMS ((char *, int, struct target_ops *));
+
+/* Function to be called when the inferior starts up, to discover the names
+   of shared libraries that are dynamically linked, the base addresses to
+   which they are linked, and sufficient information to read in their symbols
+   at a later time. */
+
+#define SOLIB_CREATE_INFERIOR_HOOK(PID)	solib_create_inferior_hook()
+
+/* Function to be called to remove the connection between debugger and
+   dynamic linker that was established by SOLIB_CREATE_INFERIOR_HOOK.
+   (This operation does not remove shared library information from
+   the debugger, as CLEAR_SOLIB does.)
+
+   This functionality is presently not implemented for this target.
+   */
+#define SOLIB_REMOVE_INFERIOR_HOOK(PID) (0)
+
+extern void
+solib_create_inferior_hook PARAMS((void));	/* solib.c */
+
+/* This function is called by the "catch load" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is loaded.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+
+/* This function is called by the "catch unload" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is unloaded.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid,tempflag,filename,cond_string) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+
+/* This function returns TRUE if the dynamic linker has just reported
+   a load of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+
+/*
+#define SOLIB_HAVE_LOAD_EVENT(pid) \
+    error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_HAVE_LOAD_EVENT(pid) \
+(0)
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been loaded.
+
+   This function must be used only when SOLIB_HAVE_LOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+
+   Presently, this functionality is not implemented.
+   */
+
+/*
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) \
+(0)
+
+/* This function returns TRUE if the dynamic linker has just reported
+   an unload of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+/*
+#define SOLIB_HAVE_UNLOAD_EVENT(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_HAVE_UNLOAD_EVENT(pid) \
+(0)
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been unloaded.
+
+   This function must be used only when SOLIB_HAVE_UNLOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+
+   Presently, this functionality is not implemented.
+   */
+/*
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) \
+(0)
+
+/* This function returns TRUE if pc is the address of an instruction that
+   lies within the dynamic linker (such as the event hook, or the dld
+   itself).
+
+   This function must be used only when a dynamic linker event has been
+   caught, and the inferior is being stepped out of the hook, or undefined
+   results are guaranteed.
+
+   Presently, this functionality is not implemented.
+   */
+
+/*
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) \
+   error("catch of library loads/unloads not yet implemented on this platform")
+*/
+
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) \
+(0)
+
+/* This function must be called when the inferior is killed, and the program
+   restarted.  This is not the same as CLEAR_SOLIB, in that it doesn't discard
+   any symbol tables.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_RESTART() \
+  (0)
+
+/* If we can't set a breakpoint, and it's in a shared library, just
+   disable it.  */
+
+#define DISABLE_UNSETTABLE_BREAK(addr)	(solib_address(addr) != NULL)
+
+extern char *
+solib_address PARAMS ((CORE_ADDR));		/* solib.c */
+
+/* If ADDR lies in a shared library, return its name.  */
+
+#define PC_SOLIB(addr)	solib_address (addr)
+
+#ifdef SVR4_SHARED_LIBS
+
+/* Return 1 if PC lies in the dynamic symbol resolution code of the
+   SVR4 run time loader.  */
+
+#define IN_SOLIB_DYNSYM_RESOLVE_CODE(pc) in_svr4_dynsym_resolve_code (pc)
+
+extern int
+in_svr4_dynsym_resolve_code PARAMS ((CORE_ADDR));
+
+#endif
diff --git a/gdb/somread.c b/gdb/somread.c
new file mode 100644
index 0000000..c03abd0
--- /dev/null
+++ b/gdb/somread.c
@@ -0,0 +1,803 @@
+/* Read HP PA/Risc object files for GDB.
+   Copyright 1991, 1992, 1996 Free Software Foundation, Inc.
+   Written by Fred Fish at Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+#include <syms.h>
+#include "symtab.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "gdb-stabs.h"
+#include "complaints.h"
+#include "gdb_string.h"
+#include "demangle.h"
+#include "som.h"
+#include "libhppa.h"
+
+/* Various things we might complain about... */
+
+static void
+som_symfile_init PARAMS ((struct objfile *));
+
+static void
+som_new_init PARAMS ((struct objfile *));
+
+static void
+som_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+som_symfile_finish PARAMS ((struct objfile *));
+
+static void
+som_symtab_read PARAMS ((bfd *, struct objfile *,
+			 struct section_offsets *));
+
+static struct section_offsets *
+som_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
+
+/* FIXME: These should really be in a common header somewhere */
+
+extern void
+hpread_build_psymtabs PARAMS ((struct objfile *, struct section_offsets *, int));
+
+extern void
+hpread_symfile_finish PARAMS ((struct objfile *));
+
+extern void
+hpread_symfile_init PARAMS ((struct objfile *));
+
+extern void
+do_pxdb PARAMS ((bfd *));
+
+/*
+
+LOCAL FUNCTION
+
+	som_symtab_read -- read the symbol table of a SOM file
+
+SYNOPSIS
+
+	void som_symtab_read (bfd *abfd, struct objfile *objfile,
+			      struct section_offsets *section_offsets)
+
+DESCRIPTION
+
+	Given an open bfd, a base address to relocate symbols to, and a
+	flag that specifies whether or not this bfd is for an executable
+	or not (may be shared library for example), add all the global
+	function and data symbols to the minimal symbol table.
+*/
+
+static void
+som_symtab_read (abfd, objfile, section_offsets)
+     bfd *abfd;
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+{
+  unsigned int number_of_symbols;
+  int val, dynamic;
+  char *stringtab;
+  asection *shlib_info;
+  struct symbol_dictionary_record *buf, *bufp, *endbufp;
+  char *symname;
+  CONST int symsize = sizeof (struct symbol_dictionary_record);
+  CORE_ADDR text_offset, data_offset;
+
+
+  text_offset = ANOFFSET (section_offsets, 0);
+  data_offset = ANOFFSET (section_offsets, 1);
+
+  number_of_symbols = bfd_get_symcount (abfd);
+
+  buf = alloca (symsize * number_of_symbols);
+  bfd_seek (abfd, obj_som_sym_filepos (abfd), SEEK_SET);
+  val = bfd_read (buf, symsize * number_of_symbols, 1, abfd);
+  if (val != symsize * number_of_symbols)
+    error ("Couldn't read symbol dictionary!");
+
+  stringtab = alloca (obj_som_stringtab_size (abfd));
+  bfd_seek (abfd, obj_som_str_filepos (abfd), SEEK_SET);
+  val = bfd_read (stringtab, obj_som_stringtab_size (abfd), 1, abfd);
+  if (val != obj_som_stringtab_size (abfd))
+    error ("Can't read in HP string table.");
+
+  /* We need to determine if objfile is a dynamic executable (so we
+     can do the right thing for ST_ENTRY vs ST_CODE symbols).
+
+     There's nothing in the header which easily allows us to do
+     this.  The only reliable way I know of is to check for the
+     existance of a $SHLIB_INFO$ section with a non-zero size.  */
+  /* The code below is not a reliable way to check whether an
+   * executable is dynamic, so I commented it out - RT
+   * shlib_info = bfd_get_section_by_name (objfile->obfd, "$SHLIB_INFO$");
+   * if (shlib_info)
+   *   dynamic = (bfd_section_size (objfile->obfd, shlib_info) != 0);
+   * else
+   *   dynamic = 0;
+   */
+  /* I replaced the code with a simple check for text offset not being
+   * zero. Still not 100% reliable, but a more reliable way of asking
+   * "is this a dynamic executable?" than the above. RT
+   */
+  dynamic = (text_offset != 0);
+
+  endbufp = buf + number_of_symbols;
+  for (bufp = buf; bufp < endbufp; ++bufp)
+    {
+      enum minimal_symbol_type ms_type;
+
+      QUIT;
+
+      switch (bufp->symbol_scope)
+	{
+	case SS_UNIVERSAL:
+	case SS_EXTERNAL:
+	  switch (bufp->symbol_type)
+	    {
+	    case ST_SYM_EXT:
+	    case ST_ARG_EXT:
+	      continue;
+
+	    case ST_CODE:
+	    case ST_PRI_PROG:
+	    case ST_SEC_PROG:
+	    case ST_MILLICODE:
+	      symname = bufp->name.n_strx + stringtab;
+	      ms_type = mst_text;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+	    case ST_ENTRY:
+	      symname = bufp->name.n_strx + stringtab;
+	      /* For a dynamic executable, ST_ENTRY symbols are
+		 the stubs, while the ST_CODE symbol is the real
+		 function.  */
+	      if (dynamic)
+		ms_type = mst_solib_trampoline;
+	      else
+		ms_type = mst_text;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+	    case ST_STUB:
+	      symname = bufp->name.n_strx + stringtab;
+	      ms_type = mst_solib_trampoline;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+	    case ST_DATA:
+	      symname = bufp->name.n_strx + stringtab;
+	      bufp->symbol_value += data_offset;
+	      ms_type = mst_data;
+	      break;
+	    default:
+	      continue;
+	    }
+	  break;
+
+#if 0
+	  /* SS_GLOBAL and SS_LOCAL are two names for the same thing (!).  */
+	case SS_GLOBAL:
+#endif
+	case SS_LOCAL:
+	  switch (bufp->symbol_type)
+	    {
+	    case ST_SYM_EXT:
+	    case ST_ARG_EXT:
+	      continue;
+
+	    case ST_CODE:
+	      symname = bufp->name.n_strx + stringtab;
+	      ms_type = mst_file_text;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+
+	    check_strange_names:
+	      /* Utah GCC 2.5, FSF GCC 2.6 and later generate correct local
+		 label prefixes for stabs, constant data, etc.  So we need
+		 only filter out L$ symbols which are left in due to
+		 limitations in how GAS generates SOM relocations.
+
+		 When linking in the HPUX C-library the HP linker has
+		 the nasty habit of placing section symbols from the literal
+		 subspaces in the middle of the program's text.  Filter
+		 those out as best we can.  Check for first and last character
+		 being '$'. 
+
+		 And finally, the newer HP compilers emit crud like $PIC_foo$N
+		 in some circumstance (PIC code I guess).  It's also claimed
+		 that they emit D$ symbols too.  What stupidity.  */
+	      if ((symname[0] == 'L' && symname[1] == '$')
+		  || (symname[0] == '$' && symname[strlen(symname) - 1] == '$')
+		  || (symname[0] == 'D' && symname[1] == '$')
+		  || (strncmp (symname, "$PIC", 4) == 0))
+		continue;
+	      break;
+
+	    case ST_PRI_PROG:
+	    case ST_SEC_PROG:
+	    case ST_MILLICODE:
+	      symname = bufp->name.n_strx + stringtab;
+	      ms_type = mst_file_text;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+	    case ST_ENTRY:
+	      symname = bufp->name.n_strx + stringtab;
+	      /* For a dynamic executable, ST_ENTRY symbols are
+		 the stubs, while the ST_CODE symbol is the real
+		 function.  */
+	      if (dynamic)
+		ms_type = mst_solib_trampoline;
+	      else
+		ms_type = mst_file_text;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+	    case ST_STUB:
+	      symname = bufp->name.n_strx + stringtab;
+	      ms_type = mst_solib_trampoline;
+	      bufp->symbol_value += text_offset;
+#ifdef SMASH_TEXT_ADDRESS
+	      SMASH_TEXT_ADDRESS (bufp->symbol_value);
+#endif
+	      break;
+
+
+	    case ST_DATA:
+	      symname = bufp->name.n_strx + stringtab;
+	      bufp->symbol_value += data_offset;
+	      ms_type = mst_file_data;
+	      goto check_strange_names;
+
+	    default:
+	      continue;
+	    }
+	  break;
+
+	/* This can happen for common symbols when -E is passed to the
+	   final link.  No idea _why_ that would make the linker force
+	   common symbols to have an SS_UNSAT scope, but it does.
+
+	   This also happens for weak symbols, but their type is
+	   ST_DATA.  */
+	case SS_UNSAT:
+	  switch (bufp->symbol_type)
+	    {
+	      case ST_STORAGE:
+	      case ST_DATA:
+		symname = bufp->name.n_strx + stringtab;
+		bufp->symbol_value += data_offset;
+		ms_type = mst_data;
+		break;
+
+	      default:
+		continue;
+	    }
+	  break;
+
+	default:
+	  continue;
+	}
+
+      if (bufp->name.n_strx > obj_som_stringtab_size (abfd))
+	error ("Invalid symbol data; bad HP string table offset: %d",
+	       bufp->name.n_strx);
+
+      prim_record_minimal_symbol (symname, bufp->symbol_value, ms_type, 
+				  objfile);
+    }
+}
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to som_symfile_init, which 
+   currently does nothing.
+
+   SECTION_OFFSETS is a set of offsets to apply to relocate the symbols
+   in each section.  This is ignored, as it isn't needed for SOM.
+
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).
+
+   This function only does the minimum work necessary for letting the
+   user "name" things symbolically; it does not read the entire symtab.
+   Instead, it reads the external and static symbols and puts them in partial
+   symbol tables.  When more extensive information is requested of a
+   file, the corresponding partial symbol table is mutated into a full
+   fledged symbol table by going back and reading the symbols
+   for real.
+
+   We look for sections with specific names, to tell us what debug
+   format to look for:  FIXME!!!
+
+   somstab_build_psymtabs() handles STABS symbols.
+
+   Note that SOM files have a "minimal" symbol table, which is vaguely
+   reminiscent of a COFF symbol table, but has only the minimal information
+   necessary for linking.  We process this also, and use the information to
+   build gdb's minimal symbol table.  This gives us some minimal debugging
+   capability even for files compiled without -g.  */
+
+static void
+som_symfile_read (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;
+{
+  bfd *abfd = objfile->obfd;
+  struct cleanup *back_to;
+
+  do_pxdb (symfile_bfd_open (objfile->name));
+
+  init_minimal_symbol_collection ();
+  back_to = make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* Read in the import list and the export list.  Currently
+     the export list isn't used; the import list is used in
+     hp-symtab-read.c to handle static vars declared in other
+     shared libraries. */
+  init_import_symbols (objfile);
+#if 0   /* Export symbols not used today 1997-08-05 */ 
+  init_export_symbols (objfile);
+#else
+  objfile->export_list = NULL;
+  objfile->export_list_size = 0;
+#endif
+
+  /* Process the normal SOM symbol table first. 
+     This reads in the DNTT and string table, but doesn't
+     actually scan the DNTT. It does scan the linker symbol
+     table and thus build up a "minimal symbol table". */
+ 
+  som_symtab_read (abfd, objfile, section_offsets);
+
+  /* Now read information from the stabs debug sections.
+     This is a no-op for SOM.
+     Perhaps it is intended for some kind of mixed STABS/SOM
+     situation? */    
+  stabsect_build_psymtabs (objfile, section_offsets, mainline,
+			   "$GDB_SYMBOLS$", "$GDB_STRINGS$", "$TEXT$");
+
+  /* Now read the native debug information. 
+     This builds the psymtab. This used to be done via a scan of
+     the DNTT, but is now done via the PXDB-built quick-lookup tables
+     together with a scan of the GNTT. See hp-psymtab-read.c. */
+  hpread_build_psymtabs (objfile, section_offsets, mainline);
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. 
+     Further symbol-reading is done incrementally, file-by-file,
+     in a step known as "psymtab-to-symtab" expansion. hp-symtab-read.c
+     contains the code to do the actual DNTT scanning and symtab building. */
+  install_minimal_symbols (objfile);
+
+  /* Force hppa-tdep.c to re-read the unwind descriptors.  */
+  objfile->obj_private = NULL;
+  do_cleanups (back_to);
+}
+
+/* Initialize anything that needs initializing when a completely new symbol
+   file is specified (not just adding some symbols from another file, e.g. a
+   shared library).
+
+   We reinitialize buildsym, since we may be reading stabs from a SOM file.  */
+
+static void
+som_new_init (ignore)
+     struct objfile *ignore;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+som_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile -> sym_stab_info != NULL)
+    {
+      mfree (objfile -> md, objfile -> sym_stab_info);
+    }
+  hpread_symfile_finish (objfile);
+}
+
+/* SOM specific initialization routine for reading symbols.  */
+
+static void
+som_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  /* SOM objects may be reordered, so set OBJF_REORDERED.  If we
+     find this causes a significant slowdown in gdb then we could
+     set it in the debug symbol readers only when necessary.  */
+  objfile->flags |= OBJF_REORDERED;
+  hpread_symfile_init (objfile);
+}
+
+/* SOM specific parsing routine for section offsets.
+
+   Plain and simple for now.  */
+
+static struct section_offsets *
+som_symfile_offsets (objfile, addr)
+     struct objfile *objfile;
+     CORE_ADDR addr;
+{
+  struct section_offsets *section_offsets;
+  int i;
+
+  objfile->num_sections = SECT_OFF_MAX;
+  section_offsets = (struct section_offsets *)
+    obstack_alloc (&objfile -> psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+
+  /* First see if we're a shared library.  If so, get the section
+     offsets from the library, else get them from addr.  */
+  if (!som_solib_section_offsets (objfile, section_offsets))
+    {
+      for (i = 0; i < SECT_OFF_MAX; i++)
+	ANOFFSET (section_offsets, i) = addr;
+    }
+
+  return section_offsets;
+}
+
+
+
+/* Check if a given symbol NAME is in the import list
+   of OBJFILE.
+   1 => true, 0 => false
+   This is used in hp_symtab_read.c to deal with static variables
+   that are defined in a different shared library than the one
+   whose symbols are being processed. */ 
+
+int is_in_import_list (name, objfile)
+  char * name;
+  struct objfile * objfile;
+{
+  register int i;
+
+  if (!objfile ||
+      !name ||
+      !*name)
+    return 0;
+
+  for (i=0; i < objfile->import_list_size; i++)
+    if (objfile->import_list[i] && STREQ (name, objfile->import_list[i]))
+        return 1;
+  return 0;
+}
+
+
+/* Read in and initialize the SOM import list which is present
+   for all executables and shared libraries.  The import list
+   consists of the symbols that are referenced in OBJFILE but
+   not defined there.  (Variables that are imported are dealt
+   with as "loc_indirect" vars.)
+   Return value = number of import symbols read in. */
+int
+init_import_symbols (objfile)
+  struct objfile * objfile;
+{
+  unsigned int import_list;
+  unsigned int import_list_size;
+  unsigned int string_table;
+  unsigned int string_table_size;
+  char * string_buffer;
+  register int i;
+  register int j;
+  register int k;
+  asection * text_section;      /* section handle */ 
+  unsigned int dl_header[12];   /* SOM executable header */ 
+
+  /* A struct for an entry in the SOM import list */
+  typedef struct {
+    int name;              /* index into the string table */ 
+    short dont_care1;      /* we don't use this */ 
+    unsigned char type;    /* 0 = NULL, 2 = Data, 3 = Code, 7 = Storage, 13 = Plabel */ 
+    unsigned int reserved2 : 8; /* not used */ 
+  } SomImportEntry;
+
+  /* We read 100 entries in at a time from the disk file. */ 
+# define SOM_READ_IMPORTS_NUM         100
+# define SOM_READ_IMPORTS_CHUNK_SIZE  (sizeof (SomImportEntry) * SOM_READ_IMPORTS_NUM)
+  SomImportEntry buffer[SOM_READ_IMPORTS_NUM];
+  
+  /* Initialize in case we error out */
+  objfile->import_list = NULL;
+  objfile->import_list_size = 0;
+
+#if 0  /* DEBUGGING */
+  printf ("Processing import list for %s\n", objfile->name);
+#endif
+
+  /* It doesn't work, for some reason, to read in space $TEXT$;
+     the subspace $SHLIB_INFO$ has to be used.  Some BFD quirk? pai/1997-08-05 */ 
+  text_section = bfd_get_section_by_name (objfile->obfd, "$SHLIB_INFO$");
+  if (!text_section)
+    return 0;
+  /* Get the SOM executable header */ 
+  bfd_get_section_contents (objfile->obfd, text_section, dl_header, 0, 12 * sizeof (int));
+
+  /* Check header version number for 10.x HP-UX */
+  /* Currently we deal only with 10.x systems; on 9.x the version # is 89060912.
+     FIXME: Change for future HP-UX releases and mods to the SOM executable format */ 
+  if (dl_header[0] != 93092112)
+    return 0;
+  
+  import_list = dl_header[4];     
+  import_list_size = dl_header[5];
+  if (!import_list_size)
+    return 0;
+  string_table = dl_header[10];     
+  string_table_size = dl_header[11];
+  if (!string_table_size)
+    return 0;
+
+  /* Suck in SOM string table */ 
+  string_buffer = (char *) xmalloc (string_table_size);
+  bfd_get_section_contents (objfile->obfd, text_section, string_buffer,
+                            string_table, string_table_size);
+
+  /* Allocate import list in the psymbol obstack; this has nothing
+     to do with psymbols, just a matter of convenience.  We want the
+     import list to be freed when the objfile is deallocated */ 
+  objfile->import_list
+    = (ImportEntry *) obstack_alloc (&objfile->psymbol_obstack,
+                                      import_list_size * sizeof (ImportEntry));
+
+  /* Read in the import entries, a bunch at a time */ 
+  for (j=0, k=0;
+       j < (import_list_size / SOM_READ_IMPORTS_NUM);
+       j++)
+    {
+      bfd_get_section_contents (objfile->obfd, text_section, buffer,
+                                import_list + j * SOM_READ_IMPORTS_CHUNK_SIZE,
+                                SOM_READ_IMPORTS_CHUNK_SIZE);
+      for (i=0; i < SOM_READ_IMPORTS_NUM; i++, k++)
+        {
+          if (buffer[i].type != (unsigned char) 0) 
+            {
+              objfile->import_list[k]
+                = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+              strcpy (objfile->import_list[k], string_buffer + buffer[i].name);
+              /* Some day we might want to record the type and other information too */ 
+            }
+          else /* null type */ 
+            objfile->import_list[k] = NULL;
+          
+#if 0 /* DEBUGGING */
+          printf ("Import String %d:%d (%d), type %d is %s\n", j, i, k,
+                  (int) buffer[i].type, objfile->import_list[k]);
+#endif
+        }
+    }
+
+  /* Get the leftovers */ 
+  if (k < import_list_size)
+    bfd_get_section_contents (objfile->obfd, text_section, buffer,
+                              import_list + k * sizeof (SomImportEntry),
+                              (import_list_size - k) * sizeof (SomImportEntry));
+  for (i=0; k < import_list_size; i++, k++)
+    {
+      if (buffer[i].type != (unsigned char) 0)
+        {
+          objfile->import_list[k]
+            = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+          strcpy (objfile->import_list[k], string_buffer + buffer[i].name);
+          /* Some day we might want to record the type and other information too */ 
+        }
+      else
+        objfile->import_list[k] = NULL;
+#if 0 /* DEBUGGING */ 
+      printf ("Import String F:%d (%d), type %d, is %s\n", i, k,
+              (int) buffer[i].type, objfile->import_list[k]);
+#endif
+    }
+
+  objfile->import_list_size = import_list_size;
+  free (string_buffer);
+  return import_list_size;
+}
+
+/* Read in and initialize the SOM export list which is present
+   for all executables and shared libraries.  The import list
+   consists of the symbols that are referenced in OBJFILE but
+   not defined there.  (Variables that are imported are dealt
+   with as "loc_indirect" vars.)
+   Return value = number of import symbols read in. */
+int
+init_export_symbols (objfile)
+  struct objfile * objfile;
+{
+  unsigned int export_list;
+  unsigned int export_list_size;
+  unsigned int string_table;
+  unsigned int string_table_size;
+  char * string_buffer;
+  register int i;
+  register int j;
+  register int k;
+  asection * text_section;    /* section handle */  
+  unsigned int dl_header[12]; /* SOM executable header */ 
+
+  /* A struct for an entry in the SOM export list */
+  typedef struct {
+    int next;    /* for hash table use -- we don't use this */ 
+    int name;    /* index into string table */ 
+    int value;   /* offset or plabel */
+    int dont_care1;     /* not used */ 
+    unsigned char type; /* 0 = NULL, 2 = Data, 3 = Code, 7 = Storage, 13 = Plabel */ 
+    char dont_care2;    /* not used */ 
+    short dont_care3;   /* not used */ 
+  } SomExportEntry;
+
+  /* We read 100 entries in at a time from the disk file. */ 
+# define SOM_READ_EXPORTS_NUM         100  
+# define SOM_READ_EXPORTS_CHUNK_SIZE  (sizeof (SomExportEntry) * SOM_READ_EXPORTS_NUM)
+  SomExportEntry buffer[SOM_READ_EXPORTS_NUM];
+
+  /* Initialize in case we error out */
+  objfile->export_list = NULL;
+  objfile->export_list_size = 0;
+
+#if 0  /* DEBUGGING */
+  printf ("Processing export list for %s\n", objfile->name);
+#endif
+
+  /* It doesn't work, for some reason, to read in space $TEXT$;
+     the subspace $SHLIB_INFO$ has to be used.  Some BFD quirk? pai/1997-08-05 */ 
+  text_section = bfd_get_section_by_name (objfile->obfd, "$SHLIB_INFO$");
+  if (!text_section)
+    return 0;
+  /* Get the SOM executable header */ 
+  bfd_get_section_contents (objfile->obfd, text_section, dl_header, 0, 12 * sizeof (int));
+
+  /* Check header version number for 10.x HP-UX */
+  /* Currently we deal only with 10.x systems; on 9.x the version # is 89060912.
+     FIXME: Change for future HP-UX releases and mods to the SOM executable format */ 
+  if (dl_header[0] != 93092112)
+    return 0;
+  
+  export_list = dl_header[8];      
+  export_list_size = dl_header[9]; 
+  if (!export_list_size)
+    return 0;
+  string_table = dl_header[10];     
+  string_table_size = dl_header[11];
+  if (!string_table_size)
+    return 0;
+
+  /* Suck in SOM string table */ 
+  string_buffer = (char *) xmalloc (string_table_size);
+  bfd_get_section_contents (objfile->obfd, text_section, string_buffer,
+                            string_table, string_table_size);
+
+  /* Allocate export list in the psymbol obstack; this has nothing
+     to do with psymbols, just a matter of convenience.  We want the
+     export list to be freed when the objfile is deallocated */ 
+  objfile->export_list
+    = (ExportEntry *)  obstack_alloc (&objfile->psymbol_obstack,
+                                      export_list_size * sizeof (ExportEntry));
+
+  /* Read in the export entries, a bunch at a time */ 
+  for (j=0, k=0;
+       j < (export_list_size / SOM_READ_EXPORTS_NUM);
+       j++)
+    {
+      bfd_get_section_contents (objfile->obfd, text_section, buffer,
+                                export_list + j * SOM_READ_EXPORTS_CHUNK_SIZE,
+                                SOM_READ_EXPORTS_CHUNK_SIZE);
+      for (i=0; i < SOM_READ_EXPORTS_NUM; i++, k++)
+        {
+          if (buffer[i].type != (unsigned char) 0)
+            {
+              objfile->export_list[k].name
+                = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+              strcpy (objfile->export_list[k].name, string_buffer + buffer[i].name);
+              objfile->export_list[k].address = buffer[i].value;
+              /* Some day we might want to record the type and other information too */ 
+            }
+          else /* null type */ 
+            { 
+              objfile->export_list[k].name = NULL;
+              objfile->export_list[k].address = 0;
+            }
+#if 0 /* DEBUGGING */
+          printf ("Export String %d:%d (%d), type %d is %s\n", j, i, k,
+                  (int) buffer[i].type, objfile->export_list[k].name);
+#endif
+        }
+    }
+
+  /* Get the leftovers */ 
+  if (k < export_list_size)
+    bfd_get_section_contents (objfile->obfd, text_section, buffer,
+                              export_list + k * sizeof (SomExportEntry),
+                              (export_list_size - k) * sizeof (SomExportEntry));
+  for (i=0; k < export_list_size; i++, k++)
+    {
+      if (buffer[i].type != (unsigned char) 0)
+        {
+          objfile->export_list[k].name
+            = (char *) obstack_alloc (&objfile->psymbol_obstack, strlen (string_buffer + buffer[i].name) + 1);
+          strcpy (objfile->export_list[k].name, string_buffer + buffer[i].name);
+          /* Some day we might want to record the type and other information too */ 
+          objfile->export_list[k].address = buffer[i].value;
+        }
+      else
+        {
+          objfile->export_list[k].name = NULL;
+          objfile->export_list[k].address = 0;
+        }
+#if 0 /* DEBUGGING */ 
+      printf ("Export String F:%d (%d), type %d, value %x is %s\n", i, k,
+              (int) buffer[i].type, buffer[i].value, objfile->export_list[k].name);
+#endif
+    }
+
+  objfile->export_list_size = export_list_size;
+  free (string_buffer);
+  return export_list_size;
+}
+
+
+
+/* Register that we are able to handle SOM object file formats.  */
+
+static struct sym_fns som_sym_fns =
+{
+  bfd_target_som_flavour,
+  som_new_init,		/* sym_new_init: init anything gbl to entire symtab */
+  som_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  som_symfile_read,	/* sym_read: read a symbol file into symtab */
+  som_symfile_finish,	/* sym_finish: finished with file, cleanup */
+  som_symfile_offsets,	/* sym_offsets:  Translate ext. to int. relocation */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_somread ()
+{
+  add_symtab_fns (&som_sym_fns);
+}
diff --git a/gdb/somsolib.c b/gdb/somsolib.c
new file mode 100644
index 0000000..870177c
--- /dev/null
+++ b/gdb/somsolib.c
@@ -0,0 +1,1640 @@
+/* Handle HP SOM shared libraries for GDB, the GNU Debugger.
+   Copyright 1993, 1996, 1999 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+Written by the Center for Software Science at the Univerity of Utah
+and by Cygnus Support.  */
+
+
+#include "defs.h"
+
+#include "frame.h"
+#include "bfd.h"
+#include "som.h"
+#include "libhppa.h"
+#include "gdbcore.h"
+#include "symtab.h"
+#include "breakpoint.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "inferior.h"
+#include "gdb-stabs.h"
+#include "gdb_stat.h"
+#include "gdbcmd.h"
+#include "assert.h"
+#include "language.h"
+
+#include <fcntl.h>
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+/* Uncomment this to turn on some debugging output.
+ */
+
+/* #define SOLIB_DEBUG
+ */
+ 
+/* Defined in exec.c; used to prevent dangling pointer bug.
+ */
+extern struct target_ops exec_ops;
+
+/* This lives in hppa-tdep.c. */
+extern struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR pc));
+
+/* These ought to be defined in some public interface, but aren't.  They
+   define the meaning of the various bits in the distinguished __dld_flags
+   variable that is declared in every debuggable a.out on HP-UX, and that
+   is shared between the debugger and the dynamic linker.
+   */
+#define DLD_FLAGS_MAPPRIVATE    0x1
+#define DLD_FLAGS_HOOKVALID     0x2
+#define DLD_FLAGS_LISTVALID     0x4
+#define DLD_FLAGS_BOR_ENABLE    0x8
+
+/* TODO:
+
+   * Most of this code should work for hp300 shared libraries.  Does
+   anyone care enough to weed out any SOM-isms.
+
+   * Support for hpux8 dynamic linker.  */
+
+/* The basic structure which describes a dynamically loaded object.  This
+   data structure is private to the dynamic linker and isn't found in
+   any HPUX include file.  */
+
+struct som_solib_mapped_entry
+{
+  /* The name of the library.  */
+  char *name;
+
+  /* Version of this structure (it is expected to change again in hpux10).  */
+  unsigned char struct_version;
+
+  /* Binding mode for this library.  */
+  unsigned char bind_mode;
+
+  /* Version of this library.  */
+  short library_version;
+
+  /* Start of text address,
+   * link-time text location (length of text area),
+   * end of text address.  */
+  CORE_ADDR text_addr;
+  CORE_ADDR text_link_addr;
+  CORE_ADDR text_end;
+
+  /* Start of data, start of bss and end of data.  */
+  CORE_ADDR data_start;
+  CORE_ADDR bss_start;
+  CORE_ADDR data_end;
+
+  /* Value of linkage pointer (%r19).  */
+  CORE_ADDR got_value;
+
+  /* Next entry.  */
+  struct som_solib_mapped_entry *next;
+
+  /* There are other fields, but I don't have information as to what is
+     contained in them.  */
+
+  /* For versions from HPUX-10.30 and up */
+
+  /* Address in target of offset from thread-local register of
+   * start of this thread's data.  I.e., the first thread-local
+   * variable in this shared library starts at *(tsd_start_addr)
+   * from that area pointed to by cr27 (mpsfu_hi).
+   *
+   * We do the indirection as soon as we read it, so from then
+   * on it's the offset itself.
+   */
+  CORE_ADDR tsd_start_addr;
+
+  /* Following this are longwords holding:
+   *
+   * ?, ?, ?, ptr to -1, ptr to-1, ptr to lib name (leaf name),
+   * ptr to __data_start, ptr to __data_end
+   */
+
+  
+};
+
+/* A structure to keep track of all the known shared objects.  */
+struct so_list
+{
+  struct som_solib_mapped_entry som_solib;
+  struct objfile *objfile;
+  bfd *abfd;
+  struct section_table *sections;
+  struct section_table *sections_end;
+/* elz: added this field to store the address in target space (in the
+   library) of the library descriptor (handle) which we read into
+   som_solib_mapped_entry structure*/
+  CORE_ADDR solib_addr;
+  struct so_list *next;
+  
+};
+
+static struct so_list *so_list_head;
+
+
+/* This is the cumulative size in bytes of the symbol tables of all
+   shared objects on the so_list_head list.  (When we say size, here
+   we mean of the information before it is brought into memory and
+   potentially expanded by GDB.)  When adding a new shlib, this value
+   is compared against the threshold size, held by auto_solib_add
+   (in megabytes).  If adding symbols for the new shlib would cause
+   the total size to exceed the threshold, then the new shlib's symbols
+   are not loaded.
+   */
+static LONGEST  som_solib_total_st_size;
+
+/* When the threshold is reached for any shlib, we refuse to add
+   symbols for subsequent shlibs, even if those shlibs' symbols would
+   be small enough to fit under the threshold.  (Although this may
+   result in one, early large shlib preventing the loading of later,
+   smalller shlibs' symbols, it allows us to issue one informational
+   message.  The alternative, to issue a message for each shlib whose
+   symbols aren't loaded, could be a big annoyance where the threshold
+   is exceeded due to a very large number of shlibs.)
+   */
+static int  som_solib_st_size_threshold_exceeded;
+
+/* These addresses should be filled in by som_solib_create_inferior_hook.
+   They are also used elsewhere in this module.
+   */
+typedef struct {
+  CORE_ADDR  address;
+  struct unwind_table_entry *  unwind;
+} addr_and_unwind_t;
+
+/* When adding fields, be sure to clear them in _initialize_som_solib. */
+static struct {
+  boolean  is_valid;
+  addr_and_unwind_t  hook;
+  addr_and_unwind_t  hook_stub;
+  addr_and_unwind_t  load;
+  addr_and_unwind_t  load_stub;
+  addr_and_unwind_t  unload;
+  addr_and_unwind_t  unload2;
+  addr_and_unwind_t  unload_stub;
+} dld_cache;
+
+
+
+static void som_sharedlibrary_info_command PARAMS ((char *, int));
+
+static void som_solib_sharedlibrary_command PARAMS ((char *, int));
+
+static LONGEST
+som_solib_sizeof_symbol_table (filename)
+  char *  filename;
+{
+  bfd *  abfd;
+  int  desc;
+  char *  absolute_name;
+  LONGEST  st_size = (LONGEST) 0;
+  asection *  sect;
+
+  /* We believe that filename was handed to us by the dynamic linker, and
+     is therefore always an absolute path.
+     */
+  desc = openp (getenv ("PATH"), 1, filename, O_RDONLY | O_BINARY, 0, &absolute_name);
+  if (desc < 0)
+    {
+      perror_with_name (filename);
+    }
+  filename = absolute_name;
+
+  abfd = bfd_fdopenr (filename, gnutarget, desc);
+  if (! abfd)
+    {
+      close (desc);
+      make_cleanup (free, filename);
+      error ("\"%s\": can't open to read symbols: %s.", filename,
+	     bfd_errmsg (bfd_get_error ()));
+    }
+  
+  if (!bfd_check_format (abfd, bfd_object))   /* Reads in section info */
+    {
+      bfd_close (abfd);	/* This also closes desc */
+      make_cleanup (free, filename);
+      error ("\"%s\": can't read symbols: %s.", filename,
+	     bfd_errmsg (bfd_get_error ()));
+    }
+
+  /* Sum the sizes of the various sections that compose debug info. */
+
+  /* This contains non-DOC information. */
+  sect = bfd_get_section_by_name (abfd, "$DEBUG$");
+  if (sect)
+    st_size += (LONGEST) bfd_section_size (abfd, sect);
+
+  /* This contains DOC information. */
+  sect = bfd_get_section_by_name (abfd, "$PINFO$");
+  if (sect)
+    st_size += (LONGEST) bfd_section_size (abfd, sect);
+
+  bfd_close (abfd);	/* This also closes desc */
+  free (filename);
+
+  /* Unfortunately, just summing the sizes of various debug info
+     sections isn't a very accurate measurement of how much heap
+     space the debugger will need to hold them.  It also doesn't
+     account for space needed by linker (aka "minimal") symbols.
+
+     Anecdotal evidence suggests that just summing the sizes of
+     debug-info-related sections understates the heap space needed
+     to represent it internally by about an order of magnitude.
+
+     Since it's not exactly brain surgery we're doing here, rather
+     than attempt to more accurately measure the size of a shlib's
+     symbol table in GDB's heap, we'll just apply a 10x fudge-
+     factor to the debug info sections' size-sum.  No, this doesn't
+     account for minimal symbols in non-debuggable shlibs.  But it
+     all roughly washes out in the end.
+     */
+  return st_size * (LONGEST) 10;
+}
+
+
+static void
+som_solib_add_solib_objfile (so, name, from_tty, text_addr)
+  struct so_list *  so;
+  char *  name;
+  int  from_tty;
+  CORE_ADDR  text_addr;
+{
+  obj_private_data_t *obj_private;
+  
+  so->objfile = symbol_file_add (name, from_tty, text_addr, 0, 0, 0, 0, 1);
+  so->abfd = so->objfile->obfd;
+
+  /* Mark this as a shared library and save private data.
+   */
+  so->objfile->flags |= OBJF_SHARED;
+
+  if( so->objfile->obj_private == NULL )
+    {
+      obj_private = (obj_private_data_t *)
+                        obstack_alloc( &so->objfile->psymbol_obstack,
+                                       sizeof( obj_private_data_t ));
+      obj_private->unwind_info = NULL;
+      obj_private->so_info     = NULL;
+      so->objfile->obj_private = (PTR) obj_private;
+   }
+
+  obj_private = (obj_private_data_t *) so->objfile->obj_private;
+  obj_private->so_info = so;
+
+  if (!bfd_check_format (so->abfd, bfd_object))
+    {
+      error ("\"%s\": not in executable format: %s.",
+             name, bfd_errmsg (bfd_get_error ()));
+    }
+}
+
+
+static void
+som_solib_load_symbols (so, name, from_tty, text_addr, target)
+  struct so_list *  so;
+  char *  name;
+  int  from_tty;
+  CORE_ADDR  text_addr;
+  struct target_ops *  target;
+{
+  struct section_table *  p;
+  int  status;
+  char  buf[4];
+  CORE_ADDR  presumed_data_start;
+
+#ifdef SOLIB_DEBUG
+  printf( "--Adding symbols for shared library \"%s\"\n", name );
+#endif
+
+  som_solib_add_solib_objfile (so, name, from_tty, text_addr);
+
+  /* Now we need to build a section table for this library since
+     we might be debugging a core file from a dynamically linked
+     executable in which the libraries were not privately mapped.  */
+  if (build_section_table (so->abfd,
+                           &so->sections,
+                           &so->sections_end))
+    {
+      error ("Unable to build section table for shared library\n.");
+      return;
+    }
+
+  /* Relocate all the sections based on where they got loaded.  */
+  for (p = so->sections; p < so->sections_end; p++)
+    {
+      if (p->the_bfd_section->flags & SEC_CODE)
+        {
+          p->addr += ANOFFSET (so->objfile->section_offsets, SECT_OFF_TEXT);
+          p->endaddr += ANOFFSET (so->objfile->section_offsets, SECT_OFF_TEXT);
+        }
+      else if (p->the_bfd_section->flags & SEC_DATA)
+        {
+          p->addr += ANOFFSET (so->objfile->section_offsets, SECT_OFF_DATA);
+          p->endaddr += ANOFFSET (so->objfile->section_offsets, SECT_OFF_DATA);
+        }
+    }
+
+  /* Now see if we need to map in the text and data for this shared
+     library (for example debugging a core file which does not use
+     private shared libraries.). 
+
+     Carefully peek at the first text address in the library.  If the
+     read succeeds, then the libraries were privately mapped and were
+     included in the core dump file.
+
+     If the peek failed, then the libraries were not privately mapped
+     and are not in the core file, we'll have to read them in ourselves.  */
+  status = target_read_memory (text_addr, buf, 4);
+  if (status != 0)
+    {
+      int old, new;
+      int update_coreops;
+      int update_execops;
+
+      /* We must update the to_sections field in the core_ops structure
+         here, otherwise we dereference a potential dangling pointer
+         for each call to target_read/write_memory within this routine.  */
+      update_coreops = core_ops.to_sections == target->to_sections;
+
+      /* Ditto exec_ops (this was a bug).
+       */
+      update_execops = exec_ops.to_sections == target->to_sections;
+
+      new = so->sections_end - so->sections;
+      /* Add sections from the shared library to the core target.  */
+      if (target->to_sections)
+        {
+          old = target->to_sections_end - target->to_sections;
+          target->to_sections = (struct section_table *)
+            xrealloc ((char *)target->to_sections,
+                      ((sizeof (struct section_table)) * (old + new)));
+        }
+      else
+        {
+          old = 0;
+          target->to_sections = (struct section_table *)
+            xmalloc ((sizeof (struct section_table)) * new);
+        }
+      target->to_sections_end = (target->to_sections + old + new);
+
+      /* Update the to_sections field in the core_ops structure
+         if needed, ditto exec_ops.  */
+      if (update_coreops)
+        {
+          core_ops.to_sections = target->to_sections;
+          core_ops.to_sections_end = target->to_sections_end;
+        }
+
+      if (update_execops)
+        {
+          exec_ops.to_sections = target->to_sections;
+          exec_ops.to_sections_end = target->to_sections_end;
+        }
+
+      /* Copy over the old data before it gets clobbered.  */
+      memcpy ((char *)(target->to_sections + old),
+              so->sections,
+              ((sizeof (struct section_table)) * new));
+    }
+}
+
+
+/* Add symbols from shared libraries into the symtab list, unless the
+   size threshold (specified by auto_solib_add, in megabytes) would
+   be exceeded.  */
+
+void
+som_solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{
+  struct minimal_symbol *msymbol;
+  struct so_list *so_list_tail;
+  CORE_ADDR addr;
+  asection *shlib_info;
+  int status;
+  unsigned int dld_flags;
+  char buf[4], *re_err;
+  int  threshold_warning_given = 0;
+
+  /* First validate our arguments.  */
+  if ((re_err = re_comp (arg_string ? arg_string : ".")) != NULL)
+    {
+      error ("Invalid regexp: %s", re_err);
+    }
+
+  /* If we're debugging a core file, or have attached to a running
+     process, then som_solib_create_inferior_hook will not have been
+     called.
+
+     We need to first determine if we're dealing with a dynamically
+     linked executable.  If not, then return without an error or warning.
+
+     We also need to examine __dld_flags to determine if the shared library
+     list is valid and to determine if the libraries have been privately
+     mapped.  */
+  if (symfile_objfile == NULL)
+    return;
+
+  /* First see if the objfile was dynamically linked.  */
+  shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$");
+  if (!shlib_info)
+    return;
+
+  /* It's got a $SHLIB_INFO$ section, make sure it's not empty.  */
+  if (bfd_section_size (symfile_objfile->obfd, shlib_info) == 0)
+    return;
+
+  msymbol = lookup_minimal_symbol ("__dld_flags", NULL, NULL);
+  if (msymbol == NULL)
+    {
+      error ("Unable to find __dld_flags symbol in object file.\n");
+      return;
+    }
+
+  addr = SYMBOL_VALUE_ADDRESS (msymbol);
+  /* Read the current contents.  */
+  status = target_read_memory (addr, buf, 4);
+  if (status != 0)
+    {
+      error ("Unable to read __dld_flags\n");
+      return;
+    }
+  dld_flags = extract_unsigned_integer (buf, 4);
+
+  /* __dld_list may not be valid.  If not, then we punt, warning the user if
+     we were called as a result of the add-symfile command.
+     */
+  if ((dld_flags & DLD_FLAGS_LISTVALID) == 0)
+    {
+      if (from_tty)
+        error ("__dld_list is not valid according to __dld_flags.\n");
+      return;
+    }
+
+  /* If the libraries were not mapped private, warn the user.  */
+  if ((dld_flags & DLD_FLAGS_MAPPRIVATE) == 0)
+    warning ("The shared libraries were not privately mapped; setting a\nbreakpoint in a shared library will not work until you rerun the program.\n");
+
+  msymbol = lookup_minimal_symbol ("__dld_list", NULL, NULL);
+  if (!msymbol)
+    {
+      /* Older crt0.o files (hpux8) don't have __dld_list as a symbol,
+	 but the data is still available if you know where to look.  */
+      msymbol = lookup_minimal_symbol ("__dld_flags", NULL, NULL);
+      if (!msymbol)
+	{
+	  error ("Unable to find dynamic library list.\n");
+	  return;
+	}
+      addr = SYMBOL_VALUE_ADDRESS (msymbol) - 8;
+    }
+  else
+    addr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+  status = target_read_memory (addr, buf, 4);
+  if (status != 0)
+    {
+      error ("Unable to find dynamic library list.\n");
+      return;
+    }
+
+  addr = extract_unsigned_integer (buf, 4);
+
+  /* If addr is zero, then we're using an old dynamic loader which
+     doesn't maintain __dld_list.  We'll have to use a completely
+     different approach to get shared library information.  */
+  if (addr == 0)
+    goto old_dld;
+
+  /* Using the information in __dld_list is the preferred method
+     to get at shared library information.  It doesn't depend on
+     any functions in /opt/langtools/lib/end.o and has a chance of working
+     with hpux10 when it is released.  */
+  status = target_read_memory (addr, buf, 4);
+  if (status != 0)
+    {
+      error ("Unable to find dynamic library list.\n");
+      return;
+    }
+
+  /* addr now holds the address of the first entry in the dynamic
+     library list.  */
+  addr = extract_unsigned_integer (buf, 4);
+
+  /* Now that we have a pointer to the dynamic library list, walk
+     through it and add the symbols for each library.  */
+
+  so_list_tail = so_list_head;
+  /* Find the end of the list of shared objects.  */
+  while (so_list_tail && so_list_tail->next)
+    so_list_tail = so_list_tail->next;
+
+#ifdef SOLIB_DEBUG
+  printf( "--About to read shared library list data\n" );
+#endif
+
+  /* "addr" will always point to the base of the
+   * current data entry describing the current
+   * shared library.
+   */
+  while (1)
+    {
+      CORE_ADDR name_addr, text_addr;
+      unsigned int name_len;
+      char *name;
+      struct so_list *new_so;
+      struct so_list *so_list = so_list_head;
+      struct stat statbuf;
+      LONGEST  st_size;
+      int  is_main_program;
+
+      if (addr == 0)
+	break;
+
+      /* Get a pointer to the name of this library.  */
+      status = target_read_memory (addr, buf, 4);
+      if (status != 0)
+	goto err;
+
+      name_addr = extract_unsigned_integer (buf, 4);
+      name_len = 0;
+      while (1)
+	{
+	  target_read_memory (name_addr + name_len, buf, 1);
+	  if (status != 0)
+	    goto err;
+
+	  name_len++;
+	  if (*buf == '\0')
+	    break;
+	}
+      name = alloca (name_len);
+      status = target_read_memory (name_addr, name, name_len);
+      if (status != 0)
+	goto err;
+
+      /* See if we've already loaded something with this name.  */
+      while (so_list)
+	{
+	  if (!strcmp (so_list->som_solib.name, name))
+	    break;
+	  so_list = so_list->next;
+	}
+
+      /* See if the file exists.  If not, give a warning, but don't
+	 die.  */
+      status = stat (name, &statbuf);
+      if (status == -1)
+	{
+	  warning ("Can't find file %s referenced in dld_list.", name);
+
+	  status = target_read_memory (addr + 36, buf, 4);
+	  if (status != 0)
+	    goto err;
+
+	  addr = (CORE_ADDR) extract_unsigned_integer (buf, 4);          
+	  continue;
+	}
+
+      /* If we've already loaded this one or it's the main program, skip it.  */
+      is_main_program = (strcmp (name, symfile_objfile->name) == 0);
+      if (so_list || is_main_program)
+	{
+          /* This is the "next" pointer in the strcuture.
+           */
+	  status = target_read_memory (addr + 36, buf, 4);
+	  if (status != 0)
+	    goto err;
+
+	  addr = (CORE_ADDR) extract_unsigned_integer (buf, 4);
+
+          /* Record the main program's symbol table size. */
+          if (is_main_program && !so_list)
+            {
+              st_size = som_solib_sizeof_symbol_table (name);
+              som_solib_total_st_size += st_size;
+            }
+
+          /* Was this a shlib that we noted but didn't load the symbols for?
+             If so, were we invoked this time from the command-line, via
+             a 'sharedlibrary' or 'add-symbol-file' command?  If yes to
+             both, we'd better load the symbols this time.
+             */
+          if (from_tty && so_list && !is_main_program && (so_list->objfile == NULL))
+            som_solib_load_symbols (so_list,
+                                    name,
+                                    from_tty,
+                                    so_list->som_solib.text_addr,
+                                    target);
+
+	  continue;
+	}
+
+      name = obsavestring (name, name_len - 1,
+			   &symfile_objfile->symbol_obstack);
+
+      status = target_read_memory (addr + 8, buf, 4);
+      if (status != 0)
+	goto err;
+
+      text_addr = extract_unsigned_integer (buf, 4);
+
+      new_so = (struct so_list *) xmalloc (sizeof (struct so_list));
+      memset ((char *)new_so, 0, sizeof (struct so_list));
+      if (so_list_head == NULL)
+	{
+	  so_list_head = new_so;
+	  so_list_tail = new_so;
+	}
+      else
+	{
+	  so_list_tail->next = new_so;
+	  so_list_tail = new_so;
+	}
+
+      /* Fill in all the entries in GDB's shared library list.
+       */
+       
+      new_so->solib_addr = addr;
+      new_so->som_solib.name = name;
+      status = target_read_memory (addr + 4, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.struct_version = extract_unsigned_integer (buf + 3, 1);
+      new_so->som_solib.bind_mode = extract_unsigned_integer (buf + 2, 1);
+        /* Following is "high water mark", highest version number
+         * seen, rather than plain version number.
+         */
+      new_so->som_solib.library_version = extract_unsigned_integer (buf, 2);
+      new_so->som_solib.text_addr = text_addr;
+
+        /* Q: What about longword at "addr + 8"?
+         * A: It's read above, out of order, into "text_addr".
+         */
+
+      status = target_read_memory (addr + 12, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.text_link_addr = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 16, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.text_end = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 20, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.data_start = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 24, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.bss_start = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 28, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.data_end = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 32, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.got_value = extract_unsigned_integer (buf, 4);
+
+      status = target_read_memory (addr + 36, buf, 4);
+      if (status != 0)
+	goto err;
+
+      new_so->som_solib.next = (void *)extract_unsigned_integer (buf, 4);
+
+      /* Note that we don't re-set "addr" to the next pointer
+       * until after we've read the trailing data.
+       */
+
+      status = target_read_memory (addr + 40, buf, 4);
+      new_so->som_solib.tsd_start_addr = extract_unsigned_integer (buf, 4);
+      if (status != 0)
+        goto err;
+
+      /* Now indirect via that value!
+       */
+      status = target_read_memory (new_so->som_solib.tsd_start_addr, buf, 4);
+      new_so->som_solib.tsd_start_addr = extract_unsigned_integer (buf, 4);
+      if (status != 0)
+        goto err;
+#ifdef SOLIB_DEBUG
+      printf( "\n+ library \"%s\" is described at 0x%x\n", name, addr );
+      printf( "  'version' is %d\n",          new_so->som_solib.struct_version );
+      printf( "  'bind_mode' is %d\n",        new_so->som_solib.bind_mode );
+      printf( "  'library_version' is %d\n",  new_so->som_solib.library_version );
+      printf( "  'text_addr' is 0x%x\n",      new_so->som_solib.text_addr );
+      printf( "  'text_link_addr' is 0x%x\n", new_so->som_solib.text_link_addr );
+      printf( "  'text_end' is 0x%x\n",       new_so->som_solib.text_end );
+      printf( "  'data_start' is 0x%x\n",     new_so->som_solib.data_start );
+      printf( "  'bss_start' is 0x%x\n",      new_so->som_solib.bss_start );
+      printf( "  'data_end' is 0x%x\n",       new_so->som_solib.data_end );
+      printf( "  'got_value' is %x\n",        new_so->som_solib.got_value );
+      printf( "  'next' is 0x%x\n",           new_so->som_solib.next );
+      printf( "  'tsd_start_addr' is 0x%x\n", new_so->som_solib.tsd_start_addr );
+#endif
+
+      /* Go on to the next shared library descriptor.
+       */
+      addr = (CORE_ADDR)new_so->som_solib.next;
+
+
+
+      /* At this point, we have essentially hooked the shlib into the
+         "info share" command.  However, we haven't yet loaded its
+         symbol table.  We must now decide whether we ought to, i.e.,
+         whether doing so would exceed the symbol table size threshold.
+
+         If the threshold has just now been exceeded, then we'll issue
+         a warning message (which explains how to load symbols manually,
+         if the user so desires).
+
+         If the threshold has just now or previously been exceeded,
+         we'll just add the shlib to the list of object files, but won't
+         actually load its symbols.  (This is more useful than it might
+         sound, for it allows us to e.g., still load and use the shlibs'
+         unwind information for stack tracebacks.)
+         */
+
+      /* Note that we DON'T want to preclude the user from using the
+         add-symbol-file command!  Thus, we only worry about the threshold
+         when we're invoked for other reasons.
+         */
+      st_size = som_solib_sizeof_symbol_table (name);
+      som_solib_st_size_threshold_exceeded =
+        !from_tty &&
+        ((st_size + som_solib_total_st_size) > (auto_solib_add * (LONGEST)1000000));
+
+      if (som_solib_st_size_threshold_exceeded)
+        {
+          if (! threshold_warning_given)
+            warning ("Symbols for some libraries have not been loaded, because\ndoing so would exceed the size threshold specified by auto-solib-add.\nTo manually load symbols, use the 'sharedlibrary' command.\nTo raise the threshold, set auto-solib-add to a larger value and rerun\nthe program.\n");
+          threshold_warning_given = 1;
+
+          /* We'll still make note of this shlib, even if we don't
+             read its symbols.  This allows us to use its unwind
+             information well enough to know how to e.g., correctly
+             do a traceback from a PC within the shlib, even if we
+             can't symbolize those PCs...
+             */
+          som_solib_add_solib_objfile (new_so, name, from_tty, text_addr);
+          continue;
+        }
+
+      som_solib_total_st_size += st_size;
+
+      /* This fills in new_so->objfile, among others. */
+      som_solib_load_symbols (new_so, name, from_tty, text_addr, target);
+    }
+
+#ifdef SOLIB_DEBUG
+    printf( "--Done reading shared library data\n" );
+#endif
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  reinit_frame_cache ();
+  return;
+
+old_dld:
+  error ("Debugging dynamic executables loaded via the hpux8 dld.sl is not supported.\n");
+  return;
+
+err:
+  error ("Error while reading dynamic library list.\n");
+  return;
+}
+
+
+/* This hook gets called just before the first instruction in the
+   inferior process is executed.
+
+   This is our opportunity to set magic flags in the inferior so
+   that GDB can be notified when a shared library is mapped in and
+   to tell the dynamic linker that a private copy of the library is
+   needed (so GDB can set breakpoints in the library).
+
+   __dld_flags is the location of the magic flags; as of this implementation
+   there are 3 flags of interest:
+
+   bit 0 when set indicates that private copies of the libraries are needed
+   bit 1 when set indicates that the callback hook routine is valid
+   bit 2 when set indicates that the dynamic linker should maintain the
+         __dld_list structure when loading/unloading libraries.
+
+   Note that shared libraries are not mapped in at this time, so we have
+   run the inferior until the libraries are mapped in.  Typically this
+   means running until the "_start" is called.  */
+
+void
+som_solib_create_inferior_hook()
+{
+  struct minimal_symbol *msymbol;
+  unsigned int dld_flags, status, have_endo;
+  asection *shlib_info;
+  char buf[4];
+  struct objfile *objfile;
+  CORE_ADDR anaddr;
+
+  /* First, remove all the solib event breakpoints.  Their addresses
+     may have changed since the last time we ran the program.  */
+  remove_solib_event_breakpoints ();
+
+  if (symfile_objfile == NULL)
+    return; 
+
+  /* First see if the objfile was dynamically linked.  */
+  shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$");
+  if (!shlib_info)
+    return;
+
+  /* It's got a $SHLIB_INFO$ section, make sure it's not empty.  */
+  if (bfd_section_size (symfile_objfile->obfd, shlib_info) == 0)
+    return;
+
+  have_endo = 0;
+  /* Slam the pid of the process into __d_pid; failing is only a warning!  */
+  msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      warning ("Unable to find __d_pid symbol in object file.");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      goto keep_going;
+    }
+
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+  store_unsigned_integer (buf, 4, inferior_pid);
+  status = target_write_memory (anaddr, buf, 4);
+  if (status != 0)
+    {
+      warning ("Unable to write __d_pid");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      goto keep_going;
+    }
+
+  /* Get the value of _DLD_HOOK (an export stub) and put it in __dld_hook;
+     This will force the dynamic linker to call __d_trap when significant
+     events occur.
+
+     Note that the above is the pre-HP-UX 9.0 behaviour.  At 9.0 and above,
+     the dld provides an export stub named "__d_trap" as well as the
+     function named "__d_trap" itself, but doesn't provide "_DLD_HOOK".
+     We'll look first for the old flavor and then the new.
+     */
+  msymbol = lookup_minimal_symbol ("_DLD_HOOK", NULL, symfile_objfile);
+  if (msymbol == NULL)
+      msymbol = lookup_minimal_symbol ("__d_trap", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      warning ("Unable to find _DLD_HOOK symbol in object file.");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      goto keep_going;
+    }
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+  dld_cache.hook.address = anaddr;
+
+  /* Grrr, this might not be an export symbol!  We have to find the
+     export stub.  */
+  ALL_OBJFILES (objfile)
+    {
+      struct unwind_table_entry *u;
+      struct minimal_symbol *msymbol2;
+
+      /* What a crock.  */
+      msymbol2 = lookup_minimal_symbol_solib_trampoline (SYMBOL_NAME (msymbol),
+							 NULL, objfile);
+      /* Found a symbol with the right name.  */
+      if (msymbol2)
+	{
+	  struct unwind_table_entry *u;
+	  /* It must be a shared library trampoline.  */
+	  if (SYMBOL_TYPE (msymbol2) != mst_solib_trampoline)
+	    continue;
+
+	  /* It must also be an export stub.  */
+	  u = find_unwind_entry (SYMBOL_VALUE (msymbol2));
+	  if (!u || u->stub_unwind.stub_type != EXPORT)
+	    continue;
+
+	  /* OK.  Looks like the correct import stub.  */
+	  anaddr = SYMBOL_VALUE (msymbol2);
+          dld_cache.hook_stub.address = anaddr;
+	}
+    }
+  store_unsigned_integer (buf, 4, anaddr);
+
+  msymbol = lookup_minimal_symbol ("__dld_hook", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      warning ("Unable to find __dld_hook symbol in object file.");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      goto keep_going;
+    }
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+  status = target_write_memory (anaddr, buf, 4);
+  
+  /* Now set a shlib_event breakpoint at __d_trap so we can track
+     significant shared library events.  */
+  msymbol = lookup_minimal_symbol ("__d_trap", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      warning ("Unable to find __dld_d_trap symbol in object file.");
+      warning ("Suggest linking with /opt/langtools/lib/end.o.");
+      warning ("GDB will be unable to track shl_load/shl_unload calls");
+      goto keep_going;
+    }
+  create_solib_event_breakpoint (SYMBOL_VALUE_ADDRESS (msymbol));
+
+  /* We have all the support usually found in end.o, so we can track
+     shl_load and shl_unload calls.  */
+  have_endo = 1;
+
+keep_going:
+
+  /* Get the address of __dld_flags, if no such symbol exists, then we can
+     not debug the shared code.  */
+  msymbol = lookup_minimal_symbol ("__dld_flags", NULL, NULL);
+  if (msymbol == NULL)
+    {
+      error ("Unable to find __dld_flags symbol in object file.\n");
+    }
+
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+  /* Read the current contents.  */
+  status = target_read_memory (anaddr, buf, 4);
+  if (status != 0)
+    {
+      error ("Unable to read __dld_flags\n");
+    }
+  dld_flags = extract_unsigned_integer (buf, 4);
+
+  /* Turn on the flags we care about.  */
+  dld_flags |= DLD_FLAGS_MAPPRIVATE;
+  if (have_endo)
+    dld_flags |= DLD_FLAGS_HOOKVALID;
+  store_unsigned_integer (buf, 4, dld_flags);
+  status = target_write_memory (anaddr, buf, 4);
+  if (status != 0)
+    {
+      error ("Unable to write __dld_flags\n");
+    }
+
+  /* Now find the address of _start and set a breakpoint there. 
+     We still need this code for two reasons:
+
+	* Not all sites have /opt/langtools/lib/end.o, so it's not always
+	possible to track the dynamic linker's events.
+
+	* At this time no events are triggered for shared libraries
+	loaded at startup time (what a crock).  */
+	
+  msymbol = lookup_minimal_symbol ("_start", NULL, symfile_objfile);
+  if (msymbol == NULL)
+    {
+      error ("Unable to find _start symbol in object file.\n");
+    }
+
+  anaddr = SYMBOL_VALUE_ADDRESS (msymbol);
+
+  /* Make the breakpoint at "_start" a shared library event breakpoint.  */
+  create_solib_event_breakpoint (anaddr);
+
+  /* Wipe out all knowledge of old shared libraries since their
+     mapping can change from one exec to another!  */
+  while (so_list_head)
+    {
+      struct so_list *temp;
+
+      temp = so_list_head;
+      free (so_list_head);
+      so_list_head = temp->next;
+    }
+  clear_symtab_users ();
+}
+
+
+static void
+reset_inferior_pid (saved_inferior_pid)
+  int  saved_inferior_pid;
+{
+  inferior_pid = saved_inferior_pid;
+}
+
+
+/* This operation removes the "hook" between GDB and the dynamic linker,
+   which causes the dld to notify GDB of shared library events.
+
+   After this operation completes, the dld will no longer notify GDB of
+   shared library events.  To resume notifications, GDB must call
+   som_solib_create_inferior_hook.
+
+   This operation does not remove any knowledge of shared libraries which
+   GDB may already have been notified of.
+   */
+void
+som_solib_remove_inferior_hook (pid)
+  int  pid;
+{
+  CORE_ADDR  addr;
+  struct minimal_symbol *  msymbol;
+  int  status;
+  char  dld_flags_buffer [TARGET_INT_BIT/TARGET_CHAR_BIT];
+  unsigned int  dld_flags_value;
+  int  saved_inferior_pid = inferior_pid;
+  struct cleanup *  old_cleanups = make_cleanup (reset_inferior_pid, saved_inferior_pid);
+
+  /* Ensure that we're really operating on the specified process. */
+  inferior_pid = pid;
+
+  /* We won't bother to remove the solib breakpoints from this process.
+
+     In fact, on PA64 the breakpoint is hard-coded into the dld callback,
+     and thus we're not supposed to remove it.
+
+     Rather, we'll merely clear the dld_flags bit that enables callbacks.
+     */
+  msymbol = lookup_minimal_symbol ("__dld_flags", NULL, NULL);
+
+  addr = SYMBOL_VALUE_ADDRESS (msymbol);
+  status = target_read_memory (addr, dld_flags_buffer, TARGET_INT_BIT/TARGET_CHAR_BIT);
+
+  dld_flags_value = extract_unsigned_integer (dld_flags_buffer,
+                                              sizeof (dld_flags_value));
+
+  dld_flags_value &= ~DLD_FLAGS_HOOKVALID;
+  store_unsigned_integer (dld_flags_buffer,
+                          sizeof (dld_flags_value),
+                          dld_flags_value);
+  status = target_write_memory (addr, dld_flags_buffer, TARGET_INT_BIT/TARGET_CHAR_BIT);
+
+  do_cleanups (old_cleanups);
+}
+
+
+/* This function creates a breakpoint on the dynamic linker hook, which
+   is called when e.g., a shl_load or shl_unload call is made.  This
+   breakpoint will only trigger when a shl_load call is made.
+
+   If filename is NULL, then loads of any dll will be caught.  Else,
+   only loads of the file whose pathname is the string contained by
+   filename will be caught.
+
+   Undefined behaviour is guaranteed if this function is called before
+   som_solib_create_inferior_hook.
+   */
+void
+som_solib_create_catch_load_hook (pid, tempflag, filename, cond_string)
+  int  pid;
+  int  tempflag;
+  char *  filename;
+  char *  cond_string;
+{
+  create_solib_load_event_breakpoint ("__d_trap", tempflag, filename, cond_string);
+}
+
+/* This function creates a breakpoint on the dynamic linker hook, which
+   is called when e.g., a shl_load or shl_unload call is made.  This
+   breakpoint will only trigger when a shl_unload call is made.
+
+   If filename is NULL, then unloads of any dll will be caught.  Else,
+   only unloads of the file whose pathname is the string contained by
+   filename will be caught.
+
+   Undefined behaviour is guaranteed if this function is called before
+   som_solib_create_inferior_hook.
+   */
+void
+som_solib_create_catch_unload_hook (pid, tempflag, filename, cond_string)
+  int  pid;
+  int  tempflag;
+  char *  filename;
+  char *  cond_string;
+{
+  create_solib_unload_event_breakpoint ("__d_trap", tempflag, filename, cond_string);
+}
+
+int
+som_solib_have_load_event (pid)
+  int  pid;
+{
+  CORE_ADDR  event_kind;
+
+  event_kind = read_register (ARG0_REGNUM);
+  return (event_kind == SHL_LOAD);
+}
+
+int
+som_solib_have_unload_event (pid)
+  int  pid;
+{
+  CORE_ADDR  event_kind;
+
+  event_kind = read_register (ARG0_REGNUM);
+  return (event_kind == SHL_UNLOAD);
+}
+
+static char *
+som_solib_library_pathname (pid)
+  int  pid;
+{
+  CORE_ADDR  dll_handle_address;
+  CORE_ADDR  dll_pathname_address;
+  struct som_solib_mapped_entry  dll_descriptor;
+  char *  p;
+  static char  dll_pathname [1024];
+
+  /* Read the descriptor of this newly-loaded library. */
+  dll_handle_address = read_register (ARG1_REGNUM);
+  read_memory (dll_handle_address, (char *) &dll_descriptor, sizeof (dll_descriptor));
+
+  /* We can find a pointer to the dll's pathname within the descriptor. */
+  dll_pathname_address = (CORE_ADDR) dll_descriptor.name;
+  
+  /* Read the pathname, one byte at a time. */
+  p = dll_pathname;
+  for (;;)
+    {
+      char  b;
+      read_memory (dll_pathname_address++, (char *) &b, 1);
+      *p++ = b;
+      if (b == '\0')
+        break;
+    }
+
+  return dll_pathname;
+}
+
+char *
+som_solib_loaded_library_pathname (pid)
+  int  pid;
+{
+  if (! som_solib_have_load_event (pid))
+    error ("Must have a load event to use this query");
+
+  return som_solib_library_pathname (pid);
+}
+
+char *
+som_solib_unloaded_library_pathname (pid)
+  int  pid;
+{
+  if (! som_solib_have_unload_event (pid))
+    error ("Must have an unload event to use this query");
+
+  return som_solib_library_pathname (pid);
+}
+
+static void
+som_solib_desire_dynamic_linker_symbols ()
+{
+  struct objfile *objfile;
+  struct unwind_table_entry *u;
+  struct minimal_symbol *  dld_msymbol;
+
+  /* Do we already know the value of these symbols?  If so, then
+     we've no work to do.
+
+     (If you add clauses to this test, be sure to likewise update the
+     test within the loop.)
+     */
+  if (dld_cache.is_valid)
+    return;
+
+  ALL_OBJFILES (objfile)
+    {
+      dld_msymbol = lookup_minimal_symbol ("shl_load", NULL, objfile);
+      if (dld_msymbol != NULL)
+        {
+          dld_cache.load.address = SYMBOL_VALUE (dld_msymbol);
+          dld_cache.load.unwind = find_unwind_entry (dld_cache.load.address);
+        }
+
+      dld_msymbol = lookup_minimal_symbol_solib_trampoline ("shl_load",
+                                                            NULL,
+                                                            objfile);
+      if (dld_msymbol != NULL)
+        {
+          if (SYMBOL_TYPE (dld_msymbol) == mst_solib_trampoline)
+            {
+              u = find_unwind_entry (SYMBOL_VALUE (dld_msymbol));
+              if ((u != NULL) && (u->stub_unwind.stub_type == EXPORT))
+                {
+                  dld_cache.load_stub.address = SYMBOL_VALUE (dld_msymbol);
+                  dld_cache.load_stub.unwind = u;
+                }
+            }
+        }
+
+      dld_msymbol = lookup_minimal_symbol ("shl_unload", NULL, objfile);
+      if (dld_msymbol != NULL)
+        {
+          dld_cache.unload.address = SYMBOL_VALUE (dld_msymbol);
+          dld_cache.unload.unwind = find_unwind_entry (dld_cache.unload.address);
+
+          /* ??rehrauer: I'm not sure exactly what this is, but it appears
+             that on some HPUX 10.x versions, there's two unwind regions to
+             cover the body of "shl_unload", the second being 4 bytes past
+             the end of the first.  This is a large hack to handle that
+             case, but since I don't seem to have any legitimate way to
+             look for this thing via the symbol table...
+             */
+          if (dld_cache.unload.unwind != NULL)
+            {
+              u = find_unwind_entry (dld_cache.unload.unwind->region_end + 4);
+              if (u != NULL)
+                {
+                  dld_cache.unload2.address = u->region_start;
+                  dld_cache.unload2.unwind = u;
+                }
+            }
+        }
+
+      dld_msymbol = lookup_minimal_symbol_solib_trampoline ("shl_unload",
+                                                            NULL,
+                                                            objfile);
+      if (dld_msymbol != NULL)
+        {
+          if (SYMBOL_TYPE (dld_msymbol) == mst_solib_trampoline)
+            {
+              u = find_unwind_entry (SYMBOL_VALUE (dld_msymbol));
+              if ((u != NULL) && (u->stub_unwind.stub_type == EXPORT))
+                {
+                  dld_cache.unload_stub.address = SYMBOL_VALUE (dld_msymbol);
+                  dld_cache.unload_stub.unwind = u;
+                }
+            }
+        }
+
+      /* Did we find everything we were looking for?  If so, stop. */
+      if ((dld_cache.load.address != NULL) && (dld_cache.load_stub.address != NULL)
+          && (dld_cache.unload.address != NULL) && (dld_cache.unload_stub.address != NULL))
+        {
+          dld_cache.is_valid = 1;
+          break;
+        }
+    }
+
+  dld_cache.hook.unwind = find_unwind_entry (dld_cache.hook.address);
+  dld_cache.hook_stub.unwind = find_unwind_entry (dld_cache.hook_stub.address);
+
+  /* We're prepared not to find some of these symbols, which is why
+     this function is a "desire" operation, and not a "require".
+     */
+}
+
+int
+som_solib_in_dynamic_linker (pid, pc)
+  int  pid;
+  CORE_ADDR  pc;
+{
+  struct unwind_table_entry *  u_pc;
+
+  /* Are we in the dld itself?
+
+     ??rehrauer: Large hack -- We'll assume that any address in a
+     shared text region is the dld's text.  This would obviously
+     fall down if the user attached to a process, whose shlibs
+     weren't mapped to a (writeable) private region.  However, in
+     that case the debugger probably isn't able to set the fundamental
+     breakpoint in the dld callback anyways, so this hack should be
+     safe.
+     */
+  if ((pc & (CORE_ADDR) 0xc0000000) == (CORE_ADDR) 0xc0000000)
+    return 1;
+
+  /* Cache the address of some symbols that are part of the dynamic
+     linker, if not already known.
+     */
+  som_solib_desire_dynamic_linker_symbols ();
+
+  /* Are we in the dld callback?  Or its export stub? */
+  u_pc = find_unwind_entry (pc);
+  if (u_pc == NULL)
+    return 0;
+
+  if ((u_pc == dld_cache.hook.unwind) || (u_pc == dld_cache.hook_stub.unwind))
+    return 1;
+
+  /* Or the interface of the dld (i.e., "shl_load" or friends)? */
+  if ((u_pc == dld_cache.load.unwind)
+      || (u_pc == dld_cache.unload.unwind)
+      || (u_pc == dld_cache.unload2.unwind)
+      || (u_pc == dld_cache.load_stub.unwind)
+      || (u_pc == dld_cache.unload_stub.unwind))
+    return 1;
+
+  /* Apparently this address isn't part of the dld's text. */
+  return 0;
+}
+
+
+/* Return the GOT value for the shared library in which ADDR belongs.  If
+   ADDR isn't in any known shared library, return zero.  */
+
+CORE_ADDR
+som_solib_get_got_by_pc (addr)
+     CORE_ADDR addr;
+{
+  struct so_list *so_list = so_list_head;
+  CORE_ADDR got_value = 0;
+
+  while (so_list)
+    {
+      if (so_list->som_solib.text_addr <= addr
+	  && so_list->som_solib.text_end > addr)
+	{
+	  got_value = so_list->som_solib.got_value;
+	  break;
+	}
+      so_list = so_list->next;
+    }
+  return got_value;
+}
+
+/*  elz:
+   Return the address of the handle of the shared library
+   in which ADDR belongs.  If
+   ADDR isn't in any known shared library, return zero.  */
+/* this function is used in hppa_fix_call_dummy in hppa-tdep.c*/
+
+CORE_ADDR
+som_solib_get_solib_by_pc (addr)
+     CORE_ADDR addr;
+{
+  struct so_list *so_list = so_list_head;
+
+  while (so_list)
+    {
+      if (so_list->som_solib.text_addr <= addr
+	  && so_list->som_solib.text_end > addr)
+        {
+	  break;
+        }
+      so_list = so_list->next;
+    }
+  if (so_list)
+   return so_list->solib_addr;
+  else
+   return 0;
+}
+
+
+int
+som_solib_section_offsets (objfile, offsets)
+     struct objfile *objfile;
+     struct section_offsets *offsets;
+{
+  struct so_list *so_list = so_list_head;
+
+  while (so_list)
+    {
+      /* Oh what a pain!  We need the offsets before so_list->objfile
+	 is valid.  The BFDs will never match.  Make a best guess.  */
+      if (strstr (objfile->name, so_list->som_solib.name))
+	{
+	  asection *private_section;
+
+	  /* The text offset is easy.  */
+	  ANOFFSET (offsets, SECT_OFF_TEXT)
+	    = (so_list->som_solib.text_addr
+	       - so_list->som_solib.text_link_addr);
+	  ANOFFSET (offsets, SECT_OFF_RODATA)
+	    = ANOFFSET (offsets, SECT_OFF_TEXT);
+
+	  /* We should look at presumed_dp in the SOM header, but
+	     that's not easily available.  This should be OK though.  */
+	  private_section = bfd_get_section_by_name (objfile->obfd,
+						     "$PRIVATE$");
+	  if (!private_section)
+	    {
+	      warning ("Unable to find $PRIVATE$ in shared library!");
+	      ANOFFSET (offsets, SECT_OFF_DATA) = 0;
+	      ANOFFSET (offsets, SECT_OFF_BSS) = 0;
+	      return 1;
+	    }
+	  ANOFFSET (offsets, SECT_OFF_DATA)
+	    = (so_list->som_solib.data_start - private_section->vma);
+	  ANOFFSET (offsets, SECT_OFF_BSS)
+	    = ANOFFSET (offsets, SECT_OFF_DATA);
+	  return 1;
+	}
+      so_list = so_list->next;
+    }
+  return 0;
+}
+
+/* Dump information about all the currently loaded shared libraries.  */
+
+static void
+som_sharedlibrary_info_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  struct so_list *so_list = so_list_head;
+
+  if (exec_bfd == NULL)
+    {
+      printf_unfiltered ("no exec file.\n");
+      return;
+    }
+
+  if (so_list == NULL)
+    {
+      printf_unfiltered ("No shared libraries loaded at this time.\n");
+      return;
+    }
+
+  printf_unfiltered ("Shared Object Libraries\n");
+  printf_unfiltered ("    %-12s%-12s%-12s%-12s%-12s%-12s\n",
+		     "  flags", "  tstart", "   tend", "  dstart", "   dend", "   dlt");
+  while (so_list)
+    {
+      unsigned int flags;
+
+      flags = so_list->som_solib.struct_version << 24;
+      flags |= so_list->som_solib.bind_mode << 16;
+      flags |= so_list->som_solib.library_version;
+      printf_unfiltered ("%s", so_list->som_solib.name);
+      if (so_list->objfile == NULL)
+        printf_unfiltered ("  (symbols not loaded)");
+      printf_unfiltered ("\n");
+      printf_unfiltered ("    %-12s", local_hex_string_custom (flags, "08l"));
+      printf_unfiltered ("%-12s",
+	      local_hex_string_custom (so_list->som_solib.text_addr, "08l"));
+      printf_unfiltered ("%-12s",
+	      local_hex_string_custom (so_list->som_solib.text_end, "08l"));
+      printf_unfiltered ("%-12s",
+	      local_hex_string_custom (so_list->som_solib.data_start, "08l"));
+      printf_unfiltered ("%-12s",
+	      local_hex_string_custom (so_list->som_solib.data_end, "08l"));
+      printf_unfiltered ("%-12s\n",
+	      local_hex_string_custom (so_list->som_solib.got_value, "08l"));
+      so_list = so_list->next;
+    }
+}
+
+static void
+som_solib_sharedlibrary_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();
+  som_solib_add (args, from_tty, (struct target_ops *) 0);
+}
+
+
+
+char *
+som_solib_address (addr)
+  CORE_ADDR  addr;
+{
+  struct so_list *  so = so_list_head;
+
+  while (so)
+    {
+      /* Is this address within this shlib's text range?  If so,
+         return the shlib's name.
+         */
+      if ((addr >= so->som_solib.text_addr) && (addr <= so->som_solib.text_end))
+        return so->som_solib.name;
+
+      /* Nope, keep looking... */
+      so = so->next;
+    }
+
+  /* No, we couldn't prove that the address is within a shlib. */
+  return NULL;
+}
+
+
+void
+som_solib_restart ()
+{
+  struct so_list *  sl = so_list_head;
+
+  /* Before the shlib info vanishes, use it to disable any breakpoints
+     that may still be active in those shlibs.
+     */
+  disable_breakpoints_in_shlibs (0);
+
+  /* Discard all the shlib descriptors.
+     */
+  while (sl)
+    {
+      struct so_list *  next_sl = sl->next;
+      free (sl);
+      sl = next_sl;
+    }
+  so_list_head = NULL;
+
+  som_solib_total_st_size = (LONGEST) 0;
+  som_solib_st_size_threshold_exceeded = 0;
+
+  dld_cache.is_valid = 0;
+
+  dld_cache.hook.address = 0;
+  dld_cache.hook.unwind = NULL;
+
+  dld_cache.hook_stub.address = 0;
+  dld_cache.hook_stub.unwind = NULL;
+
+  dld_cache.load.address = 0;
+  dld_cache.load.unwind = NULL;
+
+  dld_cache.load_stub.address = 0;
+  dld_cache.load_stub.unwind = NULL;
+
+  dld_cache.unload.address = 0;
+  dld_cache.unload.unwind = NULL;
+
+  dld_cache.unload2.address = 0;
+  dld_cache.unload2.unwind = NULL;
+
+  dld_cache.unload_stub.address = 0;
+  dld_cache.unload_stub.unwind = NULL;
+}
+
+
+
+void
+_initialize_som_solib ()
+{
+  add_com ("sharedlibrary", class_files, som_solib_sharedlibrary_command,
+           "Load shared object library symbols for files matching REGEXP.");
+  add_info ("sharedlibrary", som_sharedlibrary_info_command,
+	    "Status of loaded shared object libraries.");
+  add_show_from_set
+    (add_set_cmd ("auto-solib-add", class_support, var_zinteger,
+		  (char *) &auto_solib_add,
+		  "Set autoloading size threshold (in megabytes) of shared library symbols.\n\
+If nonzero, symbols from all shared object libraries will be loaded\n\
+automatically when the inferior begins execution or when the dynamic linker\n\
+informs gdb that a new library has been loaded, until the symbol table\n\
+of the program and libraries exceeds this threshold.\n\
+Otherwise, symbols must be loaded manually, using `sharedlibrary'.",
+		  &setlist),
+     &showlist);
+
+  /* ??rehrauer: On HP-UX, the kernel parameter MAXDSIZ limits how much
+     data space a process can use.  We ought to be reading MAXDSIZ and
+     setting auto_solib_add to some large fraction of that value.  If
+     not that, we maybe ought to be setting it smaller than the default
+     for MAXDSIZ (that being 64Mb, I believe).  However, [1] this threshold
+     is only crudely approximated rather than actually measured, and [2]
+     50 Mbytes is too small for debugging gdb itself.  Thus, the arbitrary
+     100 figure.
+     */
+  auto_solib_add = 100; /* Megabytes */
+
+  som_solib_restart ();
+}
+
+/* Get some HPUX-specific data from a shared lib.
+ */
+CORE_ADDR
+so_lib_thread_start_addr( so )
+    struct so_list *so;
+{
+    return so->som_solib.tsd_start_addr;
+}
diff --git a/gdb/somsolib.h b/gdb/somsolib.h
new file mode 100644
index 0000000..b969169
--- /dev/null
+++ b/gdb/somsolib.h
@@ -0,0 +1,177 @@
+/* HP SOM Shared library declarations for GDB, the GNU Debugger.
+   Copyright (C) 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+Written by the Center for Software Science at the Univerity of Utah
+and by Cygnus Support.  */
+
+#ifdef __STDC__		/* Forward decl's for prototypes */
+struct target_ops;
+struct objfile;
+struct section_offsets;
+#endif
+
+/* Called to add symbols from a shared library to gdb's symbol table. */
+
+#define SOLIB_ADD(filename, from_tty, targ) \
+    som_solib_add (filename, from_tty, targ)
+
+extern void
+som_solib_add PARAMS ((char *, int, struct target_ops *));
+
+extern CORE_ADDR
+som_solib_get_got_by_pc PARAMS ((CORE_ADDR));
+
+extern int
+som_solib_section_offsets PARAMS ((struct objfile *, struct section_offsets *));
+
+/* Function to be called when the inferior starts up, to discover the names
+   of shared libraries that are dynamically linked, the base addresses to
+   which they are linked, and sufficient information to read in their symbols
+   at a later time. */
+
+#define SOLIB_CREATE_INFERIOR_HOOK(PID)	som_solib_create_inferior_hook()
+
+extern void
+som_solib_create_inferior_hook PARAMS((void));
+
+/* Function to be called to remove the connection between debugger and
+   dynamic linker that was established by SOLIB_CREATE_INFERIOR_HOOK.
+   (This operation does not remove shared library information from
+   the debugger, as CLEAR_SOLIB does.)
+   */
+#define SOLIB_REMOVE_INFERIOR_HOOK(PID) som_solib_remove_inferior_hook(PID)
+
+extern void
+som_solib_remove_inferior_hook PARAMS((int));
+
+/* This function is called by the "catch load" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is loaded.
+   */
+#define SOLIB_CREATE_CATCH_LOAD_HOOK(pid,tempflag, filename,cond_string) \
+   som_solib_create_catch_load_hook (pid, tempflag, filename, cond_string)
+
+extern void
+som_solib_create_catch_load_hook PARAMS((int, int, char *, char *));
+
+/* This function is called by the "catch unload" command.  It allows
+   the debugger to be notified by the dynamic linker when a specified
+   library file (or any library file, if filename is NULL) is unloaded.
+   */
+#define SOLIB_CREATE_CATCH_UNLOAD_HOOK(pid,tempflag,filename, cond_string) \
+   som_solib_create_catch_unload_hook (pid, tempflag, filename, cond_string)
+
+extern void
+som_solib_create_catch_unload_hook PARAMS((int, int, char *, char *));
+
+/* This function returns TRUE if the dynamic linker has just reported
+   a load of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+   */
+#define SOLIB_HAVE_LOAD_EVENT(pid) \
+   som_solib_have_load_event (pid)
+
+extern int
+som_solib_have_load_event PARAMS((int));
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been loaded.
+
+   This function must be used only when SOLIB_HAVE_LOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+   */
+#define SOLIB_LOADED_LIBRARY_PATHNAME(pid) \
+   som_solib_loaded_library_pathname (pid)
+
+extern char *
+som_solib_loaded_library_pathname PARAMS((int));
+
+/* This function returns TRUE if the dynamic linker has just reported
+   an unload of a library.
+
+   This function must be used only when the inferior has stopped in
+   the dynamic linker hook, or undefined results are guaranteed.
+   */
+#define SOLIB_HAVE_UNLOAD_EVENT(pid) \
+   som_solib_have_unload_event (pid)
+
+extern int
+som_solib_have_unload_event PARAMS((int));
+
+/* This function returns a pointer to the string representation of the
+   pathname of the dynamically-linked library that has just been unloaded.
+
+   This function must be used only when SOLIB_HAVE_UNLOAD_EVENT is TRUE,
+   or undefined results are guaranteed.
+
+   This string's contents are only valid immediately after the inferior
+   has stopped in the dynamic linker hook, and becomes invalid as soon
+   as the inferior is continued.  Clients should make a copy of this
+   string if they wish to continue the inferior and then access the string.
+   */
+#define SOLIB_UNLOADED_LIBRARY_PATHNAME(pid) \
+   som_solib_unloaded_library_pathname (pid)
+
+extern char *
+som_solib_unloaded_library_pathname PARAMS((int));
+
+/* This function returns TRUE if pc is the address of an instruction that
+   lies within the dynamic linker (such as the event hook, or the dld
+   itself).
+
+   This function must be used only when a dynamic linker event has been
+   caught, and the inferior is being stepped out of the hook, or undefined
+   results are guaranteed.
+   */
+#define SOLIB_IN_DYNAMIC_LINKER(pid,pc) \
+   som_solib_in_dynamic_linker (pid, pc)
+
+extern int
+som_solib_in_dynamic_linker PARAMS((int, CORE_ADDR));
+
+/* This function must be called when the inferior is killed, and the program
+   restarted.  This is not the same as CLEAR_SOLIB, in that it doesn't discard
+   any symbol tables.
+
+   Presently, this functionality is not implemented.
+   */
+#define SOLIB_RESTART() \
+   som_solib_restart ()
+
+extern void
+som_solib_restart PARAMS((void));
+
+/* If we can't set a breakpoint, and it's in a shared library, just
+   disable it.  */
+
+#define DISABLE_UNSETTABLE_BREAK(addr)	(som_solib_address(addr) != NULL)
+
+extern char *
+som_solib_address PARAMS ((CORE_ADDR));		/* somsolib.c */
+
+/* If ADDR lies in a shared library, return its name.  */
+
+#define PC_SOLIB(addr)	som_solib_address (addr)
diff --git a/gdb/source.c b/gdb/source.c
new file mode 100644
index 0000000..9fe9742
--- /dev/null
+++ b/gdb/source.c
@@ -0,0 +1,1724 @@
+/* List lines of source files for GDB, the GNU debugger.
+   Copyright 1986, 87, 88, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "expression.h"
+#include "language.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "frame.h"
+#include "value.h"
+
+#include <sys/types.h>
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <fcntl.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include "gdbcore.h"
+#include "gnu-regex.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "annotate.h"
+#include "gdbtypes.h"
+
+#ifdef CRLF_SOURCE_FILES
+
+/* Define CRLF_SOURCE_FILES in an xm-*.h file if source files on the
+   host use \r\n rather than just \n.  Defining CRLF_SOURCE_FILES is
+   much faster than defining LSEEK_NOT_LINEAR.  */
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+#define OPEN_MODE (O_RDONLY | O_BINARY)
+#define FDOPEN_MODE FOPEN_RB
+
+#else /* ! defined (CRLF_SOURCE_FILES) */
+
+#define OPEN_MODE O_RDONLY
+#define FDOPEN_MODE FOPEN_RT
+
+#endif /* ! defined (CRLF_SOURCE_FILES) */
+
+/* Forward declarations */
+
+int open_source_file PARAMS ((struct symtab *));
+
+void find_source_lines PARAMS ((struct symtab *, int));
+  
+/* Prototypes for exported functions. */
+
+void _initialize_source PARAMS ((void));
+
+/* Prototypes for local functions. */
+
+static int get_filename_and_charpos PARAMS ((struct symtab *, char **));
+
+static void reverse_search_command PARAMS ((char *, int));
+
+static void forward_search_command PARAMS ((char *, int));
+
+static void line_info PARAMS ((char *, int));
+
+static void list_command PARAMS ((char *, int));
+
+static void ambiguous_line_spec PARAMS ((struct symtabs_and_lines *));
+
+static void source_info PARAMS ((char *, int));
+
+static void show_directories PARAMS ((char *, int));
+
+/* Path of directories to search for source files.
+   Same format as the PATH environment variable's value.  */
+
+char *source_path;
+
+/* Symtab of default file for listing lines of.  */
+
+struct symtab *current_source_symtab;
+
+/* Default next line to list.  */
+
+int current_source_line;
+
+/* Default number of lines to print with commands like "list".
+   This is based on guessing how many long (i.e. more than chars_per_line
+   characters) lines there will be.  To be completely correct, "list"
+   and friends should be rewritten to count characters and see where
+   things are wrapping, but that would be a fair amount of work.  */
+
+int lines_to_list = 10;
+
+/* Line number of last line printed.  Default for various commands.
+   current_source_line is usually, but not always, the same as this.  */
+
+static int last_line_listed;
+
+/* First line number listed by last listing command.  */
+
+static int first_line_listed;
+
+/* Saves the name of the last source file visited and a possible error code.
+   Used to prevent repeating annoying "No such file or directories" msgs */
+
+static struct symtab *last_source_visited = NULL;
+static int last_source_error = 0;
+
+
+/* Set the source file default for the "list" command to be S.
+
+   If S is NULL, and we don't have a default, find one.  This
+   should only be called when the user actually tries to use the
+   default, since we produce an error if we can't find a reasonable
+   default.  Also, since this can cause symbols to be read, doing it
+   before we need to would make things slower than necessary.  */
+
+void
+select_source_symtab (s)
+     register struct symtab *s;
+{
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  struct partial_symtab *ps;
+  struct partial_symtab *cs_pst = 0;
+  struct objfile *ofp;
+  
+  if (s)
+    {
+      current_source_symtab = s;
+      current_source_line = 1;
+      return;
+    }
+
+  if (current_source_symtab)
+    return;
+
+  /* Make the default place to list be the function `main'
+     if one exists.  */
+  if (lookup_symbol ("main", 0, VAR_NAMESPACE, 0, NULL))
+    {
+      sals = decode_line_spec ("main", 1);
+      sal = sals.sals[0];
+      free (sals.sals);
+      current_source_symtab = sal.symtab;
+      current_source_line = max (sal.line - (lines_to_list - 1), 1);
+      if (current_source_symtab)
+        return;
+    }
+  
+  /* All right; find the last file in the symtab list (ignoring .h's).  */
+
+  current_source_line = 1;
+
+  for (ofp = object_files; ofp != NULL; ofp = ofp -> next)
+    {
+      for (s = ofp -> symtabs; s; s = s->next)
+	{
+	  char *name = s -> filename;
+	  int len = strlen (name);
+	  if (! (len > 2 && (STREQ (&name[len - 2], ".h"))))
+	    {
+	      current_source_symtab = s;
+	    }
+	}
+    }
+  if (current_source_symtab)
+    return;
+
+  /* Howabout the partial symbol tables? */
+
+  for (ofp = object_files; ofp != NULL; ofp = ofp -> next)
+    {
+      for (ps = ofp -> psymtabs; ps != NULL; ps = ps -> next)
+	{
+	  char *name = ps -> filename;
+	  int len = strlen (name);
+	  if (! (len > 2 && (STREQ (&name[len - 2], ".h"))))
+	    {
+	      cs_pst = ps;
+	    }
+	}
+    }
+  if (cs_pst)
+    {
+      if (cs_pst -> readin)
+	{
+	  fatal ("Internal: select_source_symtab: readin pst found and no symtabs.");
+	}
+      else
+	{
+	  current_source_symtab = PSYMTAB_TO_SYMTAB (cs_pst);
+	}
+    }
+  if (current_source_symtab)
+    return;
+
+  error ("Can't find a default source file");
+}
+
+static void
+show_directories (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  puts_filtered ("Source directories searched: ");
+  puts_filtered (source_path);
+  puts_filtered ("\n");
+}
+
+/* Forget what we learned about line positions in source files, and
+   which directories contain them; must check again now since files
+   may be found in a different directory now.  */
+
+void
+forget_cached_source_info ()
+{
+  register struct symtab *s;
+  register struct objfile *objfile;
+
+  for (objfile = object_files; objfile != NULL; objfile = objfile -> next)
+    {
+      for (s = objfile -> symtabs; s != NULL; s = s -> next)
+	{
+	  if (s -> line_charpos != NULL)
+	    {
+	      mfree (objfile -> md, s -> line_charpos);
+	      s -> line_charpos = NULL;
+	    }
+	  if (s -> fullname != NULL)
+	    {
+	      mfree (objfile -> md, s -> fullname);
+	      s -> fullname = NULL;
+	    }
+	}
+    }
+}
+
+void
+init_source_path ()
+{
+  char buf[20];
+
+  sprintf (buf, "$cdir%c$cwd", DIRNAME_SEPARATOR);
+  source_path = strsave (buf);
+  forget_cached_source_info ();
+}
+
+/* Add zero or more directories to the front of the source path.  */
+ 
+void
+directory_command (dirname, from_tty)
+     char *dirname;
+     int from_tty;
+{
+  dont_repeat ();
+  /* FIXME, this goes to "delete dir"... */
+  if (dirname == 0)
+    {
+      if (query ("Reinitialize source path to empty? "))
+	{
+	  free (source_path);
+	  init_source_path ();
+	}
+    }
+  else
+    {
+      mod_path (dirname, &source_path);
+      last_source_visited = NULL;
+    }
+  if (from_tty)
+    show_directories ((char *)0, from_tty);
+  forget_cached_source_info ();
+}
+
+/* Add zero or more directories to the front of an arbitrary path.  */
+
+void
+mod_path (dirname, which_path)
+     char *dirname;
+     char **which_path;
+{
+  char *old = *which_path;
+  int prefix = 0;
+
+  if (dirname == 0)
+    return;
+
+  dirname = strsave (dirname);
+  make_cleanup (free, dirname);
+
+  do
+    {
+      char *name = dirname;
+      register char *p;
+      struct stat st;
+
+      {
+	char *separator = strchr (name, DIRNAME_SEPARATOR);
+	char *space = strchr (name, ' ');
+	char *tab = strchr (name, '\t');
+
+	if (separator == 0 && space == 0 && tab ==  0)
+	  p = dirname = name + strlen (name);
+	else
+	  {
+	    p = 0;
+	    if (separator != 0 && (p == 0 || separator < p))
+	      p = separator;
+	    if (space != 0 && (p == 0 || space < p))
+	      p = space;
+	    if (tab != 0 && (p == 0 || tab < p))
+	      p = tab;
+	    dirname = p + 1;
+	    while (*dirname == DIRNAME_SEPARATOR
+		   || *dirname == ' '
+		   || *dirname == '\t')
+	      ++dirname;
+	  }
+      }
+
+#ifndef _WIN32 
+      /* On win32 h:\ is different to h: */
+      if (SLASH_P (p[-1]))
+	/* Sigh. "foo/" => "foo" */
+	--p;
+#endif
+      *p = '\0';
+
+      while (p[-1] == '.')
+	{
+	  if (p - name == 1)
+	    {
+	      /* "." => getwd ().  */
+	      name = current_directory;
+	      goto append;
+	    }
+	  else if (SLASH_P (p[-2]))
+	    {
+	      if (p - name == 2)
+		{
+		  /* "/." => "/".  */
+		  *--p = '\0';
+		  goto append;
+		}
+	      else
+		{
+		  /* "...foo/." => "...foo".  */
+		  p -= 2;
+		  *p = '\0';
+		  continue;
+		}
+	    }
+	  else
+	    break;
+	}
+
+      if (name[0] == '~')
+	name = tilde_expand (name);
+      else if (!ROOTED_P (name) && name[0] != '$') 
+	  name = concat (current_directory, SLASH_STRING, name, NULL);
+      else
+	name = savestring (name, p - name);
+      make_cleanup (free, name);
+
+      /* Unless it's a variable, check existence.  */
+      if (name[0] != '$') {
+	/* These are warnings, not errors, since we don't want a
+	   non-existent directory in a .gdbinit file to stop processing
+	   of the .gdbinit file.
+
+	   Whether they get added to the path is more debatable.  Current
+	   answer is yes, in case the user wants to go make the directory
+	   or whatever.  If the directory continues to not exist/not be
+	   a directory/etc, then having them in the path should be
+	   harmless.  */
+	if (stat (name, &st) < 0)
+	  {
+	    int save_errno = errno;
+	    fprintf_unfiltered (gdb_stderr, "Warning: ");
+	    print_sys_errmsg (name, save_errno);
+	  }
+	else if ((st.st_mode & S_IFMT) != S_IFDIR)
+	  warning ("%s is not a directory.", name);
+      }
+
+    append:
+      {
+	register unsigned int len = strlen (name);
+
+	p = *which_path;
+	while (1)
+	  {
+	    if (!strncmp (p, name, len)
+		&& (p[len] == '\0' || p[len] == DIRNAME_SEPARATOR))
+	      {
+		/* Found it in the search path, remove old copy */
+		if (p > *which_path)
+		  p--;			/* Back over leading separator */
+		if (prefix > p - *which_path)
+		  goto skip_dup;	/* Same dir twice in one cmd */
+		strcpy (p, &p[len+1]);	/* Copy from next \0 or  : */
+	      }
+	    p = strchr (p, DIRNAME_SEPARATOR);
+	    if (p != 0)
+	      ++p;
+	    else
+	      break;
+	  }
+	if (p == 0)
+	  {
+	    char tinybuf[2];
+
+	    tinybuf[0] = DIRNAME_SEPARATOR;
+	    tinybuf[1] = '\0';
+
+	    /* If we have already tacked on a name(s) in this command,			   be sure they stay on the front as we tack on some more.  */
+	    if (prefix)
+	      {
+		char *temp, c;
+
+		c = old[prefix];
+		old[prefix] = '\0';
+		temp = concat (old, tinybuf, name, NULL);
+		old[prefix] = c;
+		*which_path = concat (temp, "", &old[prefix], NULL);
+		prefix = strlen (temp);
+		free (temp);
+	      }
+	    else
+	      {
+		*which_path = concat (name, (old[0] ? tinybuf : old), old, NULL);
+		prefix = strlen (name);
+	      }
+	    free (old);
+	    old = *which_path;
+	  }
+      }
+  skip_dup: ;
+    } while (*dirname != '\0');
+}
+
+
+static void
+source_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct symtab *s = current_source_symtab;
+
+  if (!s)
+    {
+      printf_filtered("No current source file.\n");
+      return;
+    }
+  printf_filtered ("Current source file is %s\n", s->filename);
+  if (s->dirname)
+    printf_filtered ("Compilation directory is %s\n", s->dirname);
+  if (s->fullname)
+    printf_filtered ("Located in %s\n", s->fullname);
+  if (s->nlines)
+    printf_filtered ("Contains %d line%s.\n", s->nlines,
+		     s->nlines == 1 ? "" : "s");
+
+  printf_filtered ("Source language is %s.\n", language_str (s->language));
+  printf_filtered ("Compiled with %s debugging format.\n", s->debugformat);
+}
+
+
+
+/* Open a file named STRING, searching path PATH (dir names sep by some char)
+   using mode MODE and protection bits PROT in the calls to open.
+
+   If TRY_CWD_FIRST, try to open ./STRING before searching PATH.
+   (ie pretend the first element of PATH is ".").  This also indicates
+   that a slash in STRING disables searching of the path (this is
+   so that "exec-file ./foo" or "symbol-file ./foo" insures that you
+   get that particular version of foo or an error message).
+
+   If FILENAMED_OPENED is non-null, set it to a newly allocated string naming
+   the actual file opened (this string will always start with a "/".  We
+   have to take special pains to avoid doubling the "/" between the directory
+   and the file, sigh!  Emacs gets confuzzed by this when we print the
+   source file name!!! 
+
+   If a file is found, return the descriptor.
+   Otherwise, return -1, with errno set for the last name we tried to open.  */
+
+/*  >>>> This should only allow files of certain types,
+    >>>>  eg executable, non-directory */
+int
+openp (path, try_cwd_first, string, mode, prot, filename_opened)
+     char *path;
+     int try_cwd_first;
+     char *string;
+     int mode;
+     int prot;
+     char **filename_opened;
+{
+  register int fd;
+  register char *filename;
+  register char *p, *p1;
+  register int len;
+  int alloclen;
+
+  if (!path)
+    path = ".";
+
+#ifdef _WIN32
+  mode |= O_BINARY;
+#endif
+
+  if (try_cwd_first || SLASH_P (string[0]))
+    {
+      int i;
+      filename = string;
+      fd = open (filename, mode, prot);
+      if (fd >= 0)
+	goto done;
+      for (i = 0; string[i]; i++)
+	if (SLASH_P (string[i]))
+	  goto done;
+    }
+
+  /* ./foo => foo */
+  while (string[0] == '.' && SLASH_P (string[1]))
+    string += 2;
+
+  alloclen = strlen (path) + strlen (string) + 2;
+  filename = (char *) alloca (alloclen);
+  fd = -1;
+  for (p = path; p; p = p1 ? p1 + 1 : 0)
+    {
+      p1 = (char *) strchr (p, DIRNAME_SEPARATOR);
+      if (p1)
+	len = p1 - p;
+      else
+	len = strlen (p);
+
+      if (len == 4 && p[0] == '$' && p[1] == 'c'
+	  && p[2] == 'w' && p[3] == 'd') {
+	/* Name is $cwd -- insert current directory name instead.  */
+	int newlen;
+
+	/* First, realloc the filename buffer if too short. */
+	len = strlen (current_directory);
+	newlen = len + strlen (string) + 2;
+	if (newlen > alloclen) {
+	  alloclen = newlen;
+	  filename = (char *) alloca (alloclen);
+	}
+	strcpy (filename, current_directory);
+      } else {
+	/* Normal file name in path -- just use it.  */
+	strncpy (filename, p, len);
+	filename[len] = 0;
+      }
+
+      /* Remove trailing slashes */
+      while (len > 0 && SLASH_P (filename[len-1]))
+	filename[--len] = 0;
+
+      strcat (filename+len, SLASH_STRING);
+      strcat (filename, string);
+
+      fd = open (filename, mode);
+      if (fd >= 0) break;
+    }
+
+ done:
+  if (filename_opened)
+    {
+      if (fd < 0)
+	*filename_opened = (char *) 0;
+      else if (ROOTED_P (filename))
+	*filename_opened = savestring (filename, strlen (filename));
+      else
+	{
+	  /* Beware the // my son, the Emacs barfs, the botch that catch... */
+	  
+	  *filename_opened = concat (current_directory, 
+				     SLASH_CHAR
+				     == current_directory[strlen(current_directory)-1] 
+  				     ? "": SLASH_STRING,
+				     filename, NULL);
+        }
+    }
+#ifdef MPW
+  /* This is a debugging hack that can go away when all combinations
+     of Mac and Unix names are handled reasonably.  */
+  {
+    extern int debug_openp;
+
+    if (debug_openp)
+      {
+	printf("openp on %s, path %s mode %d prot %d\n  returned %d",
+	       string, path, mode, prot, fd);
+	if (*filename_opened)
+	  printf(" (filename is %s)", *filename_opened);
+	printf("\n");
+      }
+  }
+#endif /* MPW */
+
+  return fd;
+}
+
+ 
+/* This is essentially a convenience, for clients that want the behaviour
+   of openp, using source_path, but that really don't want the file to be
+   opened but want instead just to know what the full pathname is (as
+   qualified against source_path).
+
+   The current working directory is searched first.
+
+   If the file was found, this function returns 1, and FULL_PATHNAME is
+   set to the fully-qualified pathname.
+
+   Else, this functions returns 0, and FULL_PATHNAME is set to NULL.
+   */
+int
+source_full_path_of (filename, full_pathname)
+  char *  filename;
+  char **  full_pathname;
+{
+  int  fd;
+
+  fd = openp (source_path, 1, filename, O_RDONLY, 0, full_pathname);
+  if (fd < 0)
+    {
+      *full_pathname = NULL;
+      return 0;
+    }
+
+  close (fd);
+  return 1;
+}
+
+
+/* Open a source file given a symtab S.  Returns a file descriptor or
+   negative number for error.  */
+
+int
+open_source_file (s)
+     struct symtab *s;
+{
+  char *path = source_path;
+  char *p;
+  int result;
+  char *fullname;
+
+  /* Quick way out if we already know its full name */
+  if (s->fullname) 
+    {
+      result = open (s->fullname, OPEN_MODE);
+      if (result >= 0)
+        return result;
+      /* Didn't work -- free old one, try again. */
+      mfree (s->objfile->md, s->fullname);
+      s->fullname = NULL;
+    }
+
+  if (s->dirname != NULL)
+    {
+      /* Replace a path entry of  $cdir  with the compilation directory name */
+#define	cdir_len	5
+      /* We cast strstr's result in case an ANSIhole has made it const,
+	 which produces a "required warning" when assigned to a nonconst. */
+      p = (char *)strstr (source_path, "$cdir");
+      if (p && (p == path || p[-1] == DIRNAME_SEPARATOR)
+	    && (p[cdir_len] == DIRNAME_SEPARATOR || p[cdir_len] == '\0'))
+	{
+	  int len;
+
+	  path = (char *)
+	    alloca (strlen (source_path) + 1 + strlen (s->dirname) + 1);
+	  len = p - source_path;
+	  strncpy (path, source_path, len);		/* Before $cdir */
+	  strcpy (path + len, s->dirname);		/* new stuff */
+	  strcat (path + len, source_path + len + cdir_len); /* After $cdir */
+	}
+    }
+
+  result = openp (path, 0, s->filename, OPEN_MODE, 0, &s->fullname);
+  if (result < 0)
+    {
+      /* Didn't work.  Try using just the basename. */
+      p = basename (s->filename);
+      if (p != s->filename)
+	result = openp (path, 0, p, OPEN_MODE, 0, &s->fullname);
+    }
+#ifdef MPW
+  if (result < 0)
+    {
+      /* Didn't work.  Try using just the MPW basename. */
+      p = (char *) mpw_basename (s->filename);
+      if (p != s->filename)
+	result = openp (path, 0, p, OPEN_MODE, 0, &s->fullname);
+    }
+  if (result < 0)
+    {
+      /* Didn't work.  Try using the mixed Unix/MPW basename. */
+      p = (char *) mpw_mixed_basename (s->filename);
+      if (p != s->filename)
+	result = openp (path, 0, p, OPEN_MODE, 0, &s->fullname);
+    }
+#endif /* MPW */
+
+  if (result >= 0)
+    {
+      fullname = s->fullname;
+      s->fullname = mstrsave (s->objfile->md, s->fullname);
+      free (fullname);
+    }
+  return result;
+}
+
+/* Return the path to the source file associated with symtab.  Returns NULL
+   if no symtab.  */
+
+char *
+symtab_to_filename (s)
+     struct symtab *s;
+{
+  int fd;
+
+  if (!s)
+    return NULL;
+
+  /* If we've seen the file before, just return fullname. */
+
+  if (s->fullname)
+    return s->fullname;
+
+  /* Try opening the file to setup fullname */
+
+  fd = open_source_file (s);
+  if (fd < 0)
+    return s->filename;		/* File not found.  Just use short name */
+
+  /* Found the file.  Cleanup and return the full name */
+
+  close (fd);
+  return s->fullname;
+}
+
+
+/* Create and initialize the table S->line_charpos that records
+   the positions of the lines in the source file, which is assumed
+   to be open on descriptor DESC.
+   All set S->nlines to the number of such lines.  */
+
+void
+find_source_lines (s, desc)
+     struct symtab *s;
+     int desc;
+{
+  struct stat st;
+  register char *data, *p, *end;
+  int nlines = 0;
+  int lines_allocated = 1000;
+  int *line_charpos;
+  long mtime = 0;
+  int size;
+
+  line_charpos = (int *) xmmalloc (s -> objfile -> md,
+				   lines_allocated * sizeof (int));
+  if (fstat (desc, &st) < 0)
+    perror_with_name (s->filename);
+
+  if (s && s->objfile && s->objfile->obfd)
+    mtime = bfd_get_mtime(s->objfile->obfd);
+  else if (exec_bfd)
+    mtime = bfd_get_mtime(exec_bfd);
+
+  if (mtime && mtime < st.st_mtime)
+    {
+      if (tui_version)
+	printf_filtered ("\n");
+      warning("Source file is more recent than executable.\n");
+    }
+
+#ifdef LSEEK_NOT_LINEAR
+  {
+    char c;
+
+    /* Have to read it byte by byte to find out where the chars live */
+
+    line_charpos[0] = lseek (desc, 0, SEEK_CUR);
+    nlines = 1;
+    while (myread(desc, &c, 1)>0) 
+      {
+	if (c == '\n') 
+	  {
+	    if (nlines == lines_allocated) 
+	      {
+		lines_allocated *= 2;
+		line_charpos =
+		  (int *) xmrealloc (s -> objfile -> md, (char *) line_charpos,
+				     sizeof (int) * lines_allocated);
+	      }
+	    line_charpos[nlines++] = lseek (desc, 0, SEEK_CUR);
+	  }
+      }
+  }
+#else /* lseek linear.  */
+  {
+    struct cleanup *old_cleanups;
+
+    /* st_size might be a large type, but we only support source files whose 
+       size fits in an int.  */
+    size = (int) st.st_size;
+
+    /* Use malloc, not alloca, because this may be pretty large, and we may
+       run into various kinds of limits on stack size.  */
+    data = (char *) xmalloc (size);
+    old_cleanups = make_cleanup (free, data);
+
+    /* Reassign `size' to result of read for systems where \r\n -> \n.  */
+    size = myread (desc, data, size);
+    if (size < 0)
+      perror_with_name (s->filename);
+    end = data + size;
+    p = data;
+    line_charpos[0] = 0;
+    nlines = 1;
+    while (p != end)
+      {
+	if (*p++ == '\n'
+	    /* A newline at the end does not start a new line.  */
+	    && p != end)
+	  {
+	    if (nlines == lines_allocated)
+	      {
+		lines_allocated *= 2;
+		line_charpos =
+		  (int *) xmrealloc (s -> objfile -> md, (char *) line_charpos,
+				     sizeof (int) * lines_allocated);
+	      }
+	    line_charpos[nlines++] = p - data;
+	  }
+      }
+    do_cleanups (old_cleanups);
+  }
+#endif /* lseek linear.  */
+  s->nlines = nlines;
+  s->line_charpos =
+   (int *) xmrealloc (s -> objfile -> md, (char *) line_charpos,
+		      nlines * sizeof (int));
+
+}
+
+/* Return the character position of a line LINE in symtab S.
+   Return 0 if anything is invalid.  */
+
+#if 0	/* Currently unused */
+
+int
+source_line_charpos (s, line)
+     struct symtab *s;
+     int line;
+{
+  if (!s) return 0;
+  if (!s->line_charpos || line <= 0) return 0;
+  if (line > s->nlines)
+    line = s->nlines;
+  return s->line_charpos[line - 1];
+}
+
+/* Return the line number of character position POS in symtab S.  */
+
+int
+source_charpos_line (s, chr)
+    register struct symtab *s;
+    register int chr;
+{
+  register int line = 0;
+  register int *lnp;
+    
+  if (s == 0 || s->line_charpos == 0) return 0;
+  lnp = s->line_charpos;
+  /* Files are usually short, so sequential search is Ok */
+  while (line < s->nlines  && *lnp <= chr)
+    {
+      line++;
+      lnp++;
+    }
+  if (line >= s->nlines)
+    line = s->nlines;
+  return line;
+}
+
+#endif	/* 0 */
+
+
+/* Get full pathname and line number positions for a symtab.
+   Return nonzero if line numbers may have changed.
+   Set *FULLNAME to actual name of the file as found by `openp',
+   or to 0 if the file is not found.  */
+
+static int
+get_filename_and_charpos (s, fullname)
+     struct symtab *s;
+     char **fullname;
+{
+  register int desc, linenums_changed = 0;
+  
+  desc = open_source_file (s);
+  if (desc < 0)
+    {
+      if (fullname)
+	*fullname = NULL;
+      return 0;
+    }  
+  if (fullname)
+    *fullname = s->fullname;
+  if (s->line_charpos == 0) linenums_changed = 1;
+  if (linenums_changed) find_source_lines (s, desc);
+  close (desc);
+  return linenums_changed;
+}
+
+/* Print text describing the full name of the source file S
+   and the line number LINE and its corresponding character position.
+   The text starts with two Ctrl-z so that the Emacs-GDB interface
+   can easily find it.
+
+   MID_STATEMENT is nonzero if the PC is not at the beginning of that line.
+
+   Return 1 if successful, 0 if could not find the file.  */
+
+int
+identify_source_line (s, line, mid_statement, pc)
+     struct symtab *s;
+     int line;
+     int mid_statement;
+     CORE_ADDR pc;
+{
+  if (s->line_charpos == 0)
+    get_filename_and_charpos (s, (char **)NULL);
+  if (s->fullname == 0)
+    return 0;
+  if (line > s->nlines)
+    /* Don't index off the end of the line_charpos array.  */
+    return 0;
+  annotate_source (s->fullname, line, s->line_charpos[line - 1],
+		   mid_statement, pc);
+
+  current_source_line = line;
+  first_line_listed = line;
+  last_line_listed = line;
+  current_source_symtab = s;
+  return 1;
+}
+
+
+/* Print source lines from the file of symtab S,
+   starting with line number LINE and stopping before line number STOPLINE. */
+
+static void
+print_source_lines_base (s, line, stopline, noerror)
+     struct symtab *s;
+     int line, stopline;
+     int noerror;
+{
+  register int c;
+  register int desc;
+  register FILE *stream;
+  int nlines = stopline - line;
+
+  /* Regardless of whether we can open the file, set current_source_symtab. */
+  current_source_symtab = s;
+  current_source_line = line;
+  first_line_listed = line;
+
+
+  /* Only prints "No such file or directory" once */
+  if ((s != last_source_visited) || (! last_source_error))
+    {
+      last_source_visited = s;
+      desc = open_source_file (s);
+    }
+  else
+    {
+      desc = last_source_error;
+      noerror = 1;
+    }
+
+  if (desc < 0)
+    {
+      last_source_error = desc;
+
+      if (! noerror)
+        {
+	  char *name = alloca (strlen (s->filename) + 100);
+	  sprintf (name, "%d\t%s", line, s->filename);
+	  print_sys_errmsg (name, errno);
+	}
+      else
+	printf_filtered ("%d\tin %s\n", line, s->filename);
+
+      return;
+    }
+
+  last_source_error = 0;
+
+  if (s->line_charpos == 0)
+    find_source_lines (s, desc);
+
+  if (line < 1 || line > s->nlines)
+    {
+      close (desc);
+      error ("Line number %d out of range; %s has %d lines.",
+	     line, s->filename, s->nlines);
+    }
+
+  if (lseek (desc, s->line_charpos[line - 1], 0) < 0)
+    {
+      close (desc);
+      perror_with_name (s->filename);
+    }
+
+  stream = fdopen (desc, FDOPEN_MODE);
+  clearerr (stream);
+
+  while (nlines-- > 0)
+    {
+      c = fgetc (stream);
+      if (c == EOF) break;
+      last_line_listed = current_source_line;
+      printf_filtered ("%d\t", current_source_line++);
+      do
+	{
+	  if (c < 040 && c != '\t' && c != '\n' && c != '\r')
+	    printf_filtered ("^%c", c + 0100);
+	  else if (c == 0177)
+	    printf_filtered ("^?");
+#ifdef CRLF_SOURCE_FILES
+	  else if (c == '\r')
+	    {
+	      /* Just skip \r characters.  */
+	    }
+#endif
+	  else
+	    printf_filtered ("%c", c);
+	} while (c != '\n' && (c = fgetc (stream)) >= 0);
+    }
+
+  fclose (stream);
+}
+
+/* Show source lines from the file of symtab S, starting with line
+   number LINE and stopping before line number STOPLINE.  If this is the
+   not the command line version, then the source is shown in the source
+   window otherwise it is simply printed */
+
+void 
+print_source_lines (s, line, stopline, noerror)
+    struct symtab *s;
+    int line, stopline, noerror;
+{
+#if defined(TUI)
+  if (!tui_version || 
+      m_winPtrIsNull(srcWin) || !srcWin->generic.isVisible )
+    print_source_lines_base(s, line, stopline, noerror);
+  else
+    {
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr();
+      extern void tui_vAddWinToLayout PARAMS ((va_list));
+      extern void tui_vUpdateSourceWindowsWithLine PARAMS ((va_list));
+
+    /* Regardless of whether we can open the file,
+       set current_source_symtab. */
+    current_source_symtab = s;
+    current_source_line = line;
+    first_line_listed = line;
+
+    /* make sure that the source window is displayed */
+    tuiDo((TuiOpaqueFuncPtr)tui_vAddWinToLayout, SRC_WIN);
+
+    tuiDo((TuiOpaqueFuncPtr)tui_vUpdateSourceWindowsWithLine, s, line);
+    tuiDo((TuiOpaqueFuncPtr)tui_vUpdateLocatorFilename, s->filename);
+  }
+#else
+  print_source_lines_base(s, line, stopline, noerror);
+#endif
+}
+
+
+
+/* Print a list of files and line numbers which a user may choose from
+  in order to list a function which was specified ambiguously (as with
+  `list classname::overloadedfuncname', for example).  The vector in
+  SALS provides the filenames and line numbers.  */
+
+static void
+ambiguous_line_spec (sals)
+     struct symtabs_and_lines *sals;
+{
+  int i;
+
+  for (i = 0; i < sals->nelts; ++i)
+    printf_filtered("file: \"%s\", line number: %d\n",
+		    sals->sals[i].symtab->filename, sals->sals[i].line);
+}
+
+static void
+list_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct symtabs_and_lines sals, sals_end;
+  struct symtab_and_line sal, sal_end;
+  struct symbol *sym;
+  char *arg1;
+  int no_end = 1;
+  int dummy_end = 0;
+  int dummy_beg = 0;
+  int linenum_beg = 0;
+  char *p;
+
+  if (!have_full_symbols () && !have_partial_symbols())
+    error ("No symbol table is loaded.  Use the \"file\" command.");
+
+  /* Pull in a current source symtab if necessary */
+  if (current_source_symtab == 0 &&
+      (arg == 0 || arg[0] == '+' || arg[0] == '-'))
+    select_source_symtab (0);
+
+  /* "l" or "l +" lists next ten lines.  */
+
+  if (arg == 0 || STREQ (arg, "+"))
+    {
+      if (current_source_symtab == 0)
+	error ("No default source file yet.  Do \"help list\".");
+      print_source_lines (current_source_symtab, current_source_line,
+			  current_source_line + lines_to_list, 0);
+      return;
+    }
+
+  /* "l -" lists previous ten lines, the ones before the ten just listed.  */
+  if (STREQ (arg, "-"))
+    {
+      if (current_source_symtab == 0)
+	error ("No default source file yet.  Do \"help list\".");
+      print_source_lines (current_source_symtab,
+			  max (first_line_listed - lines_to_list, 1),
+			  first_line_listed, 0);
+      return;
+    }
+
+  /* Now if there is only one argument, decode it in SAL
+     and set NO_END.
+     If there are two arguments, decode them in SAL and SAL_END
+     and clear NO_END; however, if one of the arguments is blank,
+     set DUMMY_BEG or DUMMY_END to record that fact.  */
+
+  arg1 = arg;
+  if (*arg1 == ',')
+    dummy_beg = 1;
+  else
+    {
+      sals = decode_line_1 (&arg1, 0, 0, 0, 0);
+
+      if (! sals.nelts) return;  /*  C++  */
+      if (sals.nelts > 1)
+	{
+	  ambiguous_line_spec (&sals);
+	  free (sals.sals);
+	  return;
+	}
+
+      sal = sals.sals[0];
+      free (sals.sals);
+    }
+
+  /* Record whether the BEG arg is all digits.  */
+
+  for (p = arg; p != arg1 && *p >= '0' && *p <= '9'; p++);
+  linenum_beg = (p == arg1);
+
+  while (*arg1 == ' ' || *arg1 == '\t')
+    arg1++;
+  if (*arg1 == ',')
+    {
+      no_end = 0;
+      arg1++;
+      while (*arg1 == ' ' || *arg1 == '\t')
+	arg1++;
+      if (*arg1 == 0)
+	dummy_end = 1;
+      else
+	{
+	  if (dummy_beg)
+	    sals_end = decode_line_1 (&arg1, 0, 0, 0, 0);
+	  else
+	    sals_end = decode_line_1 (&arg1, 0, sal.symtab, sal.line, 0);
+	  if (sals_end.nelts == 0) 
+	    return;
+	  if (sals_end.nelts > 1)
+	    {
+	      ambiguous_line_spec (&sals_end);
+	      free (sals_end.sals);
+	      return;
+	    }
+	  sal_end = sals_end.sals[0];
+	  free (sals_end.sals);
+	}
+    }
+
+  if (*arg1)
+    error ("Junk at end of line specification.");
+
+  if (!no_end && !dummy_beg && !dummy_end
+      && sal.symtab != sal_end.symtab)
+    error ("Specified start and end are in different files.");
+  if (dummy_beg && dummy_end)
+    error ("Two empty args do not say what lines to list.");
+ 
+  /* if line was specified by address,
+     first print exactly which line, and which file.
+     In this case, sal.symtab == 0 means address is outside
+     of all known source files, not that user failed to give a filename.  */
+  if (*arg == '*')
+    {
+      if (sal.symtab == 0)
+	/* FIXME-32x64--assumes sal.pc fits in long.  */
+	error ("No source file for address %s.",
+		local_hex_string((unsigned long) sal.pc));
+      sym = find_pc_function (sal.pc);
+      if (sym)
+	{
+	  print_address_numeric (sal.pc, 1, gdb_stdout);
+	  printf_filtered (" is in ");
+	  fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
+	  printf_filtered (" (%s:%d).\n", sal.symtab->filename, sal.line);
+	}
+      else
+	{
+	  print_address_numeric (sal.pc, 1, gdb_stdout);
+	  printf_filtered (" is at %s:%d.\n",
+			   sal.symtab->filename, sal.line);
+	}
+    }
+
+  /* If line was not specified by just a line number,
+     and it does not imply a symtab, it must be an undebuggable symbol
+     which means no source code.  */
+
+  if (! linenum_beg && sal.symtab == 0)
+    error ("No line number known for %s.", arg);
+
+  /* If this command is repeated with RET,
+     turn it into the no-arg variant.  */
+
+  if (from_tty)
+    *arg = 0;
+
+  if (dummy_beg && sal_end.symtab == 0)
+    error ("No default source file yet.  Do \"help list\".");
+  if (dummy_beg)
+    print_source_lines (sal_end.symtab,
+			max (sal_end.line - (lines_to_list - 1), 1),
+			sal_end.line + 1, 0);
+  else if (sal.symtab == 0)
+    error ("No default source file yet.  Do \"help list\".");
+  else if (no_end)
+    if (lines_to_list % 2 == 0) 
+      print_source_lines (sal.symtab,
+			  max (sal.line - (lines_to_list / 2), 1),
+			  sal.line + (lines_to_list / 2), 0);
+    else
+      /* If lines_to_list is odd, then we round down in
+       * one of the lines_to_list/2 computations, round up in
+       * the other, so the total window size around the specified
+       * line comes out right.
+       */
+      print_source_lines (sal.symtab,
+			max (sal.line - (lines_to_list / 2), 1),
+			sal.line + ((1+lines_to_list) / 2), 0);
+  else
+    print_source_lines (sal.symtab, sal.line,
+			(dummy_end
+			 ? sal.line + lines_to_list
+			 : sal_end.line + 1),
+			0);
+}
+
+/* Print info on range of pc's in a specified line.  */
+
+static void
+line_info (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  CORE_ADDR start_pc, end_pc;
+  int i;
+
+  INIT_SAL (&sal);	/* initialize to zeroes */
+
+  if (arg == 0)
+    {
+      sal.symtab = current_source_symtab;
+      sal.line = last_line_listed;
+      sals.nelts = 1;
+      sals.sals = (struct symtab_and_line *)
+	xmalloc (sizeof (struct symtab_and_line));
+      sals.sals[0] = sal;
+    }
+  else
+    {
+      sals = decode_line_spec_1 (arg, 0);
+      
+      dont_repeat ();
+    }
+
+  /* C++  More than one line may have been specified, as when the user
+     specifies an overloaded function name. Print info on them all. */
+  for (i = 0; i < sals.nelts; i++)
+    {
+      sal = sals.sals[i];
+      
+      if (sal.symtab == 0)
+	{
+	  printf_filtered ("No line number information available");
+	  if (sal.pc != 0)
+	    {
+	      /* This is useful for "info line *0x7f34".  If we can't tell the
+		 user about a source line, at least let them have the symbolic
+		 address.  */
+	      printf_filtered (" for address ");
+	      wrap_here ("  ");
+	      print_address (sal.pc, gdb_stdout);
+	    }
+	  else
+	    printf_filtered (".");
+	  printf_filtered ("\n");
+	}
+      else if (sal.line > 0
+	       && find_line_pc_range (sal, &start_pc, &end_pc))
+	{
+	  if (start_pc == end_pc)
+	    {
+	      printf_filtered ("Line %d of \"%s\"",
+			       sal.line, sal.symtab->filename);
+	      wrap_here ("  ");
+	      printf_filtered (" is at address ");
+	      print_address (start_pc, gdb_stdout);
+	      wrap_here ("  ");
+	      printf_filtered (" but contains no code.\n");
+	    }
+	  else
+	    {
+	      printf_filtered ("Line %d of \"%s\"",
+			       sal.line, sal.symtab->filename);
+	      wrap_here ("  ");
+	      printf_filtered (" starts at address ");
+	      print_address (start_pc, gdb_stdout);
+	      wrap_here ("  ");
+	      printf_filtered (" and ends at ");
+	      print_address (end_pc, gdb_stdout);
+	      printf_filtered (".\n");
+	    }
+
+	  /* x/i should display this line's code.  */
+	  set_next_address (start_pc);
+
+	  /* Repeating "info line" should do the following line.  */
+	  last_line_listed = sal.line + 1;
+
+	  /* If this is the only line, show the source code.  If it could
+	     not find the file, don't do anything special.  */
+	  if (annotation_level && sals.nelts == 1)
+	    identify_source_line (sal.symtab, sal.line, 0, start_pc);
+	}
+      else
+	/* Is there any case in which we get here, and have an address
+	   which the user would want to see?  If we have debugging symbols
+	   and no line numbers?  */
+	printf_filtered ("Line number %d is out of range for \"%s\".\n",
+			 sal.line, sal.symtab->filename);
+    }
+  free (sals.sals);
+}
+
+/* Commands to search the source file for a regexp.  */
+
+/* ARGSUSED */
+static void
+forward_search_command (regex, from_tty)
+     char *regex;
+     int from_tty;
+{
+  register int c;
+  register int desc;
+  register FILE *stream;
+  int line;
+  char *msg;
+
+#if defined(TUI)
+  /* 
+  ** If this is the TUI, search from the first line displayed in 
+  ** the source window, otherwise, search from last_line_listed+1 
+  ** in current_source_symtab 
+  */
+  if (!tui_version)
+    line = last_line_listed;
+  else
+    {
+      if (srcWin->generic.isVisible && srcWin->generic.contentSize > 0)
+        line = ((TuiWinContent)
+            srcWin->generic.content)[0]->whichElement.source.lineOrAddr.lineNo;
+      else
+        {
+          printf_filtered("No source displayed.\nExpression not found.\n");
+          return;
+        }
+    }
+  line++;
+#else
+  line = last_line_listed + 1;
+#endif
+
+  msg = (char *) re_comp (regex);
+  if (msg)
+    error (msg);
+
+  if (current_source_symtab == 0)
+    select_source_symtab (0);
+
+  desc = open_source_file (current_source_symtab);
+  if (desc < 0)
+    perror_with_name (current_source_symtab->filename);
+
+  if (current_source_symtab->line_charpos == 0)
+    find_source_lines (current_source_symtab, desc);
+
+  if (line < 1 || line > current_source_symtab->nlines)
+    {
+      close (desc);
+      error ("Expression not found");
+    }
+
+  if (lseek (desc, current_source_symtab->line_charpos[line - 1], 0) < 0)
+    {
+      close (desc);
+      perror_with_name (current_source_symtab->filename);
+    }
+
+  stream = fdopen (desc, FDOPEN_MODE);
+  clearerr (stream);
+  while (1) {
+    static char *buf = NULL;
+    register char *p;
+    int cursize, newsize;
+
+    cursize = 256;
+    buf = xmalloc (cursize);
+    p = buf;
+
+    c = getc (stream);
+    if (c == EOF)
+      break;
+    do {
+      *p++ = c;
+      if (p - buf == cursize)
+	{
+	  newsize = cursize + cursize / 2;
+	  buf = xrealloc (buf, newsize);
+	  p = buf + cursize;
+	  cursize = newsize;
+	}
+    } while (c != '\n' && (c = getc (stream)) >= 0);
+
+    /* we now have a source line in buf, null terminate and match */
+    *p = 0;
+    if (re_exec (buf) > 0)
+      {
+	/* Match! */
+	fclose (stream);
+	if (tui_version)
+          print_source_lines_base (current_source_symtab, line, line+1, 0);
+	print_source_lines (current_source_symtab, line, line+1, 0);
+	set_internalvar (lookup_internalvar ("_"),
+			 value_from_longest (builtin_type_int,
+					     (LONGEST) line));
+	current_source_line = max (line - lines_to_list / 2, 1);
+	return;
+      }
+    line++;
+  }
+
+  printf_filtered ("Expression not found\n");
+  fclose (stream);
+}
+
+/* ARGSUSED */
+static void
+reverse_search_command (regex, from_tty)
+     char *regex;
+     int from_tty;
+{
+  register int c;
+  register int desc;
+  register FILE *stream;
+  int line;
+  char *msg;
+#if defined(TUI)
+  /*
+  ** If this is the TUI, search from the first line displayed in
+  ** the source window, otherwise, search from last_line_listed-1
+  ** in current_source_symtab
+  */
+  if (!tui_version)
+    line = last_line_listed;
+  else
+    {
+      if (srcWin->generic.isVisible && srcWin->generic.contentSize > 0)
+        line = ((TuiWinContent)
+            srcWin->generic.content)[0]->whichElement.source.lineOrAddr.lineNo;
+      else
+        {
+          printf_filtered("No source displayed.\nExpression not found.\n");
+          return;
+        }
+    }
+  line--;
+#else
+  line = last_line_listed - 1;
+#endif
+
+  msg = (char *) re_comp (regex);
+  if (msg)
+    error (msg);
+
+  if (current_source_symtab == 0)
+    select_source_symtab (0);
+
+  desc = open_source_file (current_source_symtab);
+  if (desc < 0)
+    perror_with_name (current_source_symtab->filename);
+
+  if (current_source_symtab->line_charpos == 0)
+    find_source_lines (current_source_symtab, desc);
+
+  if (line < 1 || line > current_source_symtab->nlines)
+    {
+      close (desc);
+      error ("Expression not found");
+    }
+
+  if (lseek (desc, current_source_symtab->line_charpos[line - 1], 0) < 0)
+    {
+      close (desc);
+      perror_with_name (current_source_symtab->filename);
+    }
+
+  stream = fdopen (desc, FDOPEN_MODE);
+  clearerr (stream);
+  while (line > 1)
+    {
+/* FIXME!!!  We walk right off the end of buf if we get a long line!!! */
+      char buf[4096];		/* Should be reasonable??? */
+      register char *p = buf;
+
+      c = getc (stream);
+      if (c == EOF)
+	break;
+      do {
+	*p++ = c;
+      } while (c != '\n' && (c = getc (stream)) >= 0);
+
+      /* We now have a source line in buf; null terminate and match.  */
+      *p = 0;
+      if (re_exec (buf) > 0)
+	{
+	  /* Match! */
+	  fclose (stream);
+          if (tui_version)
+            print_source_lines_base (current_source_symtab, line, line+1, 0);
+	  print_source_lines (current_source_symtab, line, line+1, 0);
+	  set_internalvar (lookup_internalvar ("_"),
+			   value_from_longest (builtin_type_int,
+					       (LONGEST) line));
+	  current_source_line = max (line - lines_to_list / 2, 1);
+	  return;
+	}
+      line--;
+      if (fseek (stream, current_source_symtab->line_charpos[line - 1], 0) < 0)
+	{
+	  fclose (stream);
+	  perror_with_name (current_source_symtab->filename);
+	}
+    }
+
+  printf_filtered ("Expression not found\n");
+  fclose (stream);
+  return;
+}
+
+void
+_initialize_source ()
+{
+  struct cmd_list_element *c;
+  current_source_symtab = 0;
+  init_source_path ();
+
+  /* The intention is to use POSIX Basic Regular Expressions.
+     Always use the GNU regex routine for consistency across all hosts.
+     Our current GNU regex.c does not have all the POSIX features, so this is
+     just an approximation.  */
+  re_set_syntax (RE_SYNTAX_GREP);
+
+  c = add_cmd ("directory", class_files, directory_command,
+	   "Add directory DIR to beginning of search path for source files.\n\
+Forget cached info on source file locations and line positions.\n\
+DIR can also be $cwd for the current working directory, or $cdir for the\n\
+directory in which the source file was compiled into object code.\n\
+With no argument, reset the search path to $cdir:$cwd, the default.",
+	       &cmdlist);
+
+  if (dbx_commands)
+    add_com_alias("use", "directory", class_files, 0);
+
+  c->completer = filename_completer;
+
+  add_cmd ("directories", no_class, show_directories,
+	   "Current search path for finding source files.\n\
+$cwd in the path means the current working directory.\n\
+$cdir in the path means the compilation directory of the source file.",
+	   &showlist);
+
+  if (xdb_commands)
+    {
+      add_com_alias("D", "directory", class_files, 0);
+      add_cmd ("ld", no_class, show_directories,
+	   "Current search path for finding source files.\n\
+$cwd in the path means the current working directory.\n\
+$cdir in the path means the compilation directory of the source file.",
+	   &cmdlist);
+    }
+
+  add_info ("source", source_info,
+	    "Information about the current source file.");
+
+  add_info ("line", line_info,
+	    concat ("Core addresses of the code for a source line.\n\
+Line can be specified as\n\
+  LINENUM, to list around that line in current file,\n\
+  FILE:LINENUM, to list around that line in that file,\n\
+  FUNCTION, to list around beginning of that function,\n\
+  FILE:FUNCTION, to distinguish among like-named static functions.\n\
+", "\
+Default is to describe the last source line that was listed.\n\n\
+This sets the default address for \"x\" to the line's first instruction\n\
+so that \"x/i\" suffices to start examining the machine code.\n\
+The address is also stored as the value of \"$_\".", NULL));
+
+  add_com ("forward-search", class_files, forward_search_command,
+	   "Search for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\".");
+  add_com_alias ("search", "forward-search", class_files, 0);
+
+  add_com ("reverse-search", class_files, reverse_search_command,
+	   "Search backward for regular expression (see regex(3)) from last line listed.\n\
+The matching line number is also stored as the value of \"$_\".");
+
+  if (xdb_commands)
+    {
+      add_com_alias("/", "forward-search", class_files, 0);
+      add_com_alias("?", "reverse-search", class_files, 0);
+    }
+
+  add_com ("list", class_files, list_command,
+	   concat ("List specified function or line.\n\
+With no argument, lists ten more lines after or around previous listing.\n\
+\"list -\" lists the ten lines before a previous ten-line listing.\n\
+One argument specifies a line, and ten lines are listed around that line.\n\
+Two arguments with comma between specify starting and ending lines to list.\n\
+", "\
+Lines can be specified in these ways:\n\
+  LINENUM, to list around that line in current file,\n\
+  FILE:LINENUM, to list around that line in that file,\n\
+  FUNCTION, to list around beginning of that function,\n\
+  FILE:FUNCTION, to distinguish among like-named static functions.\n\
+  *ADDRESS, to list around the line containing that address.\n\
+With two args if one is empty it stands for ten lines away from the other arg.", NULL));
+
+  if (!xdb_commands)
+    add_com_alias ("l", "list", class_files, 1);
+  else
+    add_com_alias ("v", "list", class_files, 1);
+
+  if (dbx_commands)
+    add_com_alias ("file", "list", class_files, 1);
+
+  add_show_from_set
+    (add_set_cmd ("listsize", class_support, var_uinteger,
+		  (char *)&lines_to_list,
+	"Set number of source lines gdb will list by default.",
+		  &setlist),
+     &showlist);
+}
diff --git a/gdb/sparc-nat.c b/gdb/sparc-nat.c
new file mode 100644
index 0000000..3f5f8bf
--- /dev/null
+++ b/gdb/sparc-nat.c
@@ -0,0 +1,328 @@
+/* Functions specific to running gdb native on a SPARC running SunOS4.
+   Copyright 1989, 1992, 1993, 1994, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "target.h"
+#include "gdbcore.h"
+
+#include <signal.h>
+#include <sys/ptrace.h>
+#include <sys/wait.h>
+#ifdef __linux__
+#include <asm/reg.h>
+#else
+#include <machine/reg.h>
+#endif
+#include <sys/user.h>
+
+/* We don't store all registers immediately when requested, since they
+   get sent over in large chunks anyway.  Instead, we accumulate most
+   of the changes and send them over once.  "deferred_stores" keeps
+   track of which sets of registers we have locally-changed copies of,
+   so we only need send the groups that have changed.  */
+
+#define	INT_REGS	1
+#define	STACK_REGS	2
+#define	FP_REGS		4
+
+static void
+fetch_core_registers PARAMS ((char *, unsigned int, int, CORE_ADDR));
+
+/* Fetch one or more registers from the inferior.  REGNO == -1 to get
+   them all.  We actually fetch more than requested, when convenient,
+   marking them as valid so we won't fetch them again.  */
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+  int i;
+
+  /* We should never be called with deferred stores, because a prerequisite
+     for writing regs is to have fetched them all (PREPARE_TO_STORE), sigh.  */
+  if (deferred_stores) abort();
+
+  DO_DEFERRED_STORES;
+
+  /* Global and Out regs are fetched directly, as well as the control
+     registers.  If we're getting one of the in or local regs,
+     and the stack pointer has not yet been fetched,
+     we have to do that first, since they're found in memory relative
+     to the stack pointer.  */
+  if (regno < O7_REGNUM  /* including -1 */
+      || regno >= Y_REGNUM
+      || (!register_valid[SP_REGNUM] && regno < I7_REGNUM))
+    {
+      if (0 != ptrace (PTRACE_GETREGS, inferior_pid,
+		       (PTRACE_ARG3_TYPE) &inferior_registers, 0))
+	perror("ptrace_getregs");
+      
+      registers[REGISTER_BYTE (0)] = 0;
+      memcpy (&registers[REGISTER_BYTE (1)], &inferior_registers.r_g1,
+	      15 * REGISTER_RAW_SIZE (G0_REGNUM));
+      *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps; 
+      *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
+      *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = inferior_registers.r_npc;
+      *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = inferior_registers.r_y;
+
+      for (i = G0_REGNUM; i <= O7_REGNUM; i++)
+	register_valid[i] = 1;
+      register_valid[Y_REGNUM] = 1;
+      register_valid[PS_REGNUM] = 1;
+      register_valid[PC_REGNUM] = 1;
+      register_valid[NPC_REGNUM] = 1;
+      /* If we don't set these valid, read_register_bytes() rereads
+	 all the regs every time it is called!  FIXME.  */
+      register_valid[WIM_REGNUM] = 1;	/* Not true yet, FIXME */
+      register_valid[TBR_REGNUM] = 1;	/* Not true yet, FIXME */
+      register_valid[CPS_REGNUM] = 1;	/* Not true yet, FIXME */
+    }
+
+  /* Floating point registers */
+  if (regno == -1 ||
+      regno == FPS_REGNUM ||
+      (regno >= FP0_REGNUM && regno <= FP0_REGNUM + 31))
+    {
+      if (0 != ptrace (PTRACE_GETFPREGS, inferior_pid,
+		       (PTRACE_ARG3_TYPE) &inferior_fp_registers,
+		       0))
+	    perror("ptrace_getfpregs");
+      memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
+	      sizeof inferior_fp_registers.fpu_fr);
+      memcpy (&registers[REGISTER_BYTE (FPS_REGNUM)],
+	     &inferior_fp_registers.Fpu_fsr,
+	     sizeof (FPU_FSR_TYPE));
+      for (i = FP0_REGNUM; i <= FP0_REGNUM+31; i++)
+	register_valid[i] = 1;
+      register_valid[FPS_REGNUM] = 1;
+    }
+
+  /* These regs are saved on the stack by the kernel.  Only read them
+     all (16 ptrace calls!) if we really need them.  */
+  if (regno == -1)
+    {
+      target_read_memory (*(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)],
+		          &registers[REGISTER_BYTE (L0_REGNUM)],
+			  16*REGISTER_RAW_SIZE (L0_REGNUM));
+      for (i = L0_REGNUM; i <= I7_REGNUM; i++)
+	register_valid[i] = 1;
+    }
+  else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
+    {
+      CORE_ADDR sp = *(CORE_ADDR*)&registers[REGISTER_BYTE (SP_REGNUM)];
+      i = REGISTER_BYTE (regno);
+      if (register_valid[regno])
+	printf_unfiltered("register %d valid and read\n", regno);
+      target_read_memory (sp + i - REGISTER_BYTE (L0_REGNUM),
+			  &registers[i], REGISTER_RAW_SIZE (regno));
+      register_valid[regno] = 1;
+    }
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+  struct fp_status inferior_fp_registers;
+  int wanna_store = INT_REGS + STACK_REGS + FP_REGS;
+
+  /* First decide which pieces of machine-state we need to modify.  
+     Default for regno == -1 case is all pieces.  */
+  if (regno >= 0)
+    if (FP0_REGNUM <= regno && regno < FP0_REGNUM + 32)
+      {
+	wanna_store = FP_REGS;
+      }
+    else 
+      {
+	if (regno == SP_REGNUM)
+	  wanna_store = INT_REGS + STACK_REGS;
+	else if (regno < L0_REGNUM || regno > I7_REGNUM)
+	  wanna_store = INT_REGS;
+	else if (regno == FPS_REGNUM)
+	  wanna_store = FP_REGS;
+	else
+	  wanna_store = STACK_REGS;
+      }
+
+  /* See if we're forcing the stores to happen now, or deferring. */
+  if (regno == -2)
+    {
+      wanna_store = deferred_stores;
+      deferred_stores = 0;
+    }
+  else
+    {
+      if (wanna_store == STACK_REGS)
+	{
+	  /* Fall through and just store one stack reg.  If we deferred
+	     it, we'd have to store them all, or remember more info.  */
+	}
+      else
+	{
+	  deferred_stores |= wanna_store;
+	  return;
+	}
+    }
+
+  if (wanna_store & STACK_REGS)
+    {
+      CORE_ADDR sp = *(CORE_ADDR *)&registers[REGISTER_BYTE (SP_REGNUM)];
+
+      if (regno < 0 || regno == SP_REGNUM)
+	{
+	  if (!register_valid[L0_REGNUM+5]) abort();
+	  target_write_memory (sp, 
+			       &registers[REGISTER_BYTE (L0_REGNUM)],
+			       16*REGISTER_RAW_SIZE (L0_REGNUM));
+	}
+      else
+	{
+	  if (!register_valid[regno]) abort();
+	  target_write_memory (sp + REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM),
+			       &registers[REGISTER_BYTE (regno)],
+			       REGISTER_RAW_SIZE (regno));
+	}
+	
+    }
+
+  if (wanna_store & INT_REGS)
+    {
+      if (!register_valid[G1_REGNUM]) abort();
+
+      memcpy (&inferior_registers.r_g1, &registers[REGISTER_BYTE (G1_REGNUM)],
+	      15 * REGISTER_RAW_SIZE (G1_REGNUM));
+
+      inferior_registers.r_ps =
+	*(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
+      inferior_registers.r_pc =
+	*(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
+      inferior_registers.r_npc =
+	*(int *)&registers[REGISTER_BYTE (NPC_REGNUM)];
+      inferior_registers.r_y =
+	*(int *)&registers[REGISTER_BYTE (Y_REGNUM)];
+
+      if (0 != ptrace (PTRACE_SETREGS, inferior_pid,
+		       (PTRACE_ARG3_TYPE) &inferior_registers, 0))
+	perror("ptrace_setregs");
+    }
+
+  if (wanna_store & FP_REGS)
+    {
+      if (!register_valid[FP0_REGNUM+9]) abort();
+      memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	      sizeof inferior_fp_registers.fpu_fr);
+      memcpy (&inferior_fp_registers.Fpu_fsr, 
+	      &registers[REGISTER_BYTE (FPS_REGNUM)], sizeof (FPU_FSR_TYPE));
+      if (0 !=
+	 ptrace (PTRACE_SETFPREGS, inferior_pid,
+		 (PTRACE_ARG3_TYPE) &inferior_fp_registers, 0))
+	 perror("ptrace_setfpregs");
+    }
+}
+
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, ignore)
+  char *core_reg_sect;
+  unsigned core_reg_size;
+  int which;
+  CORE_ADDR ignore;	/* reg addr, unused in this version */
+{
+
+  if (which == 0) {
+
+    /* Integer registers */
+
+#define gregs ((struct regs *)core_reg_sect)
+    /* G0 *always* holds 0.  */
+    *(int *)&registers[REGISTER_BYTE (0)] = 0;
+
+    /* The globals and output registers.  */
+    memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &gregs->r_g1, 
+	    15 * REGISTER_RAW_SIZE (G1_REGNUM));
+    *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = gregs->r_ps;
+    *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = gregs->r_pc;
+    *(int *)&registers[REGISTER_BYTE (NPC_REGNUM)] = gregs->r_npc;
+    *(int *)&registers[REGISTER_BYTE (Y_REGNUM)] = gregs->r_y;
+
+    /* My best guess at where to get the locals and input
+       registers is exactly where they usually are, right above
+       the stack pointer.  If the core dump was caused by a bus error
+       from blowing away the stack pointer (as is possible) then this
+       won't work, but it's worth the try. */
+    {
+      int sp;
+
+      sp = *(int *)&registers[REGISTER_BYTE (SP_REGNUM)];
+      if (0 != target_read_memory (sp, &registers[REGISTER_BYTE (L0_REGNUM)], 
+			  16 * REGISTER_RAW_SIZE (L0_REGNUM)))
+	{
+	  /* fprintf_unfiltered so user can still use gdb */
+	  fprintf_unfiltered (gdb_stderr,
+		   "Couldn't read input and local registers from core file\n");
+	}
+    }
+  } else if (which == 2) {
+
+    /* Floating point registers */
+
+#define fpuregs  ((struct fpu *) core_reg_sect)
+    if (core_reg_size >= sizeof (struct fpu))
+      {
+	memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fpuregs->fpu_regs,
+		sizeof (fpuregs->fpu_regs));
+	memcpy (&registers[REGISTER_BYTE (FPS_REGNUM)], &fpuregs->fpu_fsr,
+		sizeof (FPU_FSR_TYPE));
+      }
+    else
+      fprintf_unfiltered (gdb_stderr, "Couldn't read float regs from core file\n");
+  }
+}
+
+int
+kernel_u_size ()
+{
+  return (sizeof (struct user));
+}
+
+
+/* Register that we are able to handle sparc core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns sparc_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_sparc ()
+{
+  add_core_fns (&sparc_core_fns);
+}
diff --git a/gdb/sparc-stub.c b/gdb/sparc-stub.c
new file mode 100644
index 0000000..7da65c2
--- /dev/null
+++ b/gdb/sparc-stub.c
@@ -0,0 +1,846 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for SPARC by Stu Grossman, Cygnus Support.
+ *
+ *  This code has been extensively tested on the Fujitsu SPARClite demo board.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <string.h>
+#include <signal.h>
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+
+extern void putDebugChar();	/* write a single character      */
+extern int getDebugChar();	/* read and return a single char */
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 2048
+
+static int initialized = 0;	/* !0 means we've been initialized */
+
+static void set_mem_fault_trap();
+
+static const char hexchars[]="0123456789abcdef";
+
+#define NUMREGS 72
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES (NUMREGS * 4)
+enum regnames {G0, G1, G2, G3, G4, G5, G6, G7,
+		 O0, O1, O2, O3, O4, O5, SP, O7,
+		 L0, L1, L2, L3, L4, L5, L6, L7,
+		 I0, I1, I2, I3, I4, I5, FP, I7,
+
+		 F0, F1, F2, F3, F4, F5, F6, F7,
+		 F8, F9, F10, F11, F12, F13, F14, F15,
+		 F16, F17, F18, F19, F20, F21, F22, F23,
+		 F24, F25, F26, F27, F28, F29, F30, F31,
+		 Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR };
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+extern void trap_low();
+
+asm("
+	.reserve trapstack, 1000 * 4, \"bss\", 8
+
+	.data
+	.align	4
+
+in_trap_handler:
+	.word	0
+
+	.text
+	.align 4
+
+! This function is called when any SPARC trap (except window overflow or
+! underflow) occurs.  It makes sure that the invalid register window is still
+! available before jumping into C code.  It will also restore the world if you
+! return from handle_exception.
+
+	.globl _trap_low
+_trap_low:
+	mov	%psr, %l0
+	mov	%wim, %l3
+
+	srl	%l3, %l0, %l4		! wim >> cwp
+	cmp	%l4, 1
+	bne	window_fine		! Branch if not in the invalid window
+	nop
+
+! Handle window overflow
+
+	mov	%g1, %l4		! Save g1, we use it to hold the wim
+	srl	%l3, 1, %g1		! Rotate wim right
+	tst	%g1
+	bg	good_wim		! Branch if new wim is non-zero
+	nop
+
+! At this point, we need to bring a 1 into the high order bit of the wim.
+! Since we don't want to make any assumptions about the number of register
+! windows, we figure it out dynamically so as to setup the wim correctly.
+
+	not	%g1			! Fill g1 with ones
+	mov	%g1, %wim		! Fill the wim with ones
+	nop
+	nop
+	nop
+	mov	%wim, %g1		! Read back the wim
+	inc	%g1			! Now g1 has 1 just to left of wim
+	srl	%g1, 1, %g1		! Now put 1 at top of wim
+	mov	%g0, %wim		! Clear wim so that subsequent save
+	nop				!  won't trap
+	nop
+	nop
+
+good_wim:
+	save	%g0, %g0, %g0		! Slip into next window
+	mov	%g1, %wim		! Install the new wim
+
+	std	%l0, [%sp + 0 * 4]	! save L & I registers
+	std	%l2, [%sp + 2 * 4]
+	std	%l4, [%sp + 4 * 4]
+	std	%l6, [%sp + 6 * 4]
+
+	std	%i0, [%sp + 8 * 4]
+	std	%i2, [%sp + 10 * 4]
+	std	%i4, [%sp + 12 * 4]
+	std	%i6, [%sp + 14 * 4]
+
+	restore				! Go back to trap window.
+	mov	%l4, %g1		! Restore %g1
+
+window_fine:
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	tst	%l5
+	bg	recursive_trap
+	inc	%l5
+
+	set	trapstack+1000*4, %sp	! Switch to trap stack
+
+recursive_trap:
+	st	%l5, [%lo(in_trap_handler) + %l4]
+	sub	%sp,(16+1+6+1+72)*4,%sp	! Make room for input & locals
+ 					! + hidden arg + arg spill
+					! + doubleword alignment
+					! + registers[72] local var
+
+	std	%g0, [%sp + (24 + 0) * 4] ! registers[Gx]
+	std	%g2, [%sp + (24 + 2) * 4]
+	std	%g4, [%sp + (24 + 4) * 4]
+	std	%g6, [%sp + (24 + 6) * 4]
+
+	std	%i0, [%sp + (24 + 8) * 4] ! registers[Ox]
+	std	%i2, [%sp + (24 + 10) * 4]
+	std	%i4, [%sp + (24 + 12) * 4]
+	std	%i6, [%sp + (24 + 14) * 4]
+					! F0->F31 not implemented
+	mov	%y, %l4
+	mov	%tbr, %l5
+	st	%l4, [%sp + (24 + 64) * 4] ! Y
+	st	%l0, [%sp + (24 + 65) * 4] ! PSR
+	st	%l3, [%sp + (24 + 66) * 4] ! WIM
+	st	%l5, [%sp + (24 + 67) * 4] ! TBR
+	st	%l1, [%sp + (24 + 68) * 4] ! PC
+	st	%l2, [%sp + (24 + 69) * 4] ! NPC
+
+					! CPSR and FPSR not impl
+
+	or	%l0, 0xf20, %l4
+	mov	%l4, %psr		! Turn on traps, disable interrupts
+
+	call	_handle_exception
+	add	%sp, 24 * 4, %o0	! Pass address of registers
+
+! Reload all of the registers that aren't on the stack
+
+	ld	[%sp + (24 + 1) * 4], %g1 ! registers[Gx]
+	ldd	[%sp + (24 + 2) * 4], %g2
+	ldd	[%sp + (24 + 4) * 4], %g4
+	ldd	[%sp + (24 + 6) * 4], %g6
+
+	ldd	[%sp + (24 + 8) * 4], %i0 ! registers[Ox]
+	ldd	[%sp + (24 + 10) * 4], %i2
+	ldd	[%sp + (24 + 12) * 4], %i4
+	ldd	[%sp + (24 + 14) * 4], %i6
+
+	ldd	[%sp + (24 + 64) * 4], %l0 ! Y & PSR
+	ldd	[%sp + (24 + 68) * 4], %l2 ! PC & NPC
+
+	restore				! Ensure that previous window is valid
+	save	%g0, %g0, %g0		!  by causing a window_underflow trap
+
+	mov	%l0, %y
+	mov	%l1, %psr		! Make sure that traps are disabled
+					! for rett
+
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	dec	%l5
+	st	%l5, [%lo(in_trap_handler) + %l4]
+
+	jmpl	%l2, %g0		! Restore old PC
+	rett	%l3			! Restore old nPC
+");
+
+/* Convert ch from a hex digit to an int */
+
+static int
+hex(ch)
+     unsigned char ch;
+{
+  if (ch >= 'a' && ch <= 'f')
+    return ch-'a'+10;
+  if (ch >= '0' && ch <= '9')
+    return ch-'0';
+  if (ch >= 'A' && ch <= 'F')
+    return ch-'A'+10;
+  return -1;
+}
+
+/* scan for the sequence $<data>#<checksum>     */
+
+static void
+getpacket(buffer)
+     char *buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int i;
+  int count;
+  unsigned char ch;
+
+  do
+    {
+      /* wait around for the start character, ignore all other characters */
+      while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+
+      checksum = 0;
+      xmitcsum = -1;
+
+      count = 0;
+
+      /* now, read until a # or end of buffer is found */
+      while (count < BUFMAX)
+	{
+	  ch = getDebugChar() & 0x7f;
+	  if (ch == '#')
+	    break;
+	  checksum = checksum + ch;
+	  buffer[count] = ch;
+	  count = count + 1;
+	}
+
+      if (count >= BUFMAX)
+	continue;
+
+      buffer[count] = 0;
+
+      if (ch == '#')
+	{
+	  xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+	  xmitcsum |= hex(getDebugChar() & 0x7f);
+#if 0
+	  /* Humans shouldn't have to figure out checksums to type to it. */
+	  putDebugChar ('+');
+	  return;
+#endif
+	  if (checksum != xmitcsum)
+	    putDebugChar('-');	/* failed checksum */
+	  else
+	    {
+	      putDebugChar('+'); /* successful transfer */
+	      /* if a sequence char is present, reply the sequence ID */
+	      if (buffer[2] == ':')
+		{
+		  putDebugChar(buffer[0]);
+		  putDebugChar(buffer[1]);
+		  /* remove sequence chars from buffer */
+		  count = strlen(buffer);
+		  for (i=3; i <= count; i++)
+		    buffer[i-3] = buffer[i];
+		}
+	    }
+	}
+    }
+  while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer.  */
+
+static void
+putpacket(buffer)
+     unsigned char *buffer;
+{
+  unsigned char checksum;
+  int count;
+  unsigned char ch;
+
+  /*  $<packet info>#<checksum>. */
+  do
+    {
+      putDebugChar('$');
+      checksum = 0;
+      count = 0;
+
+      while (ch = buffer[count])
+	{
+	  putDebugChar(ch);
+	  checksum += ch;
+	  count += 1;
+	}
+
+      putDebugChar('#');
+      putDebugChar(hexchars[checksum >> 4]);
+      putDebugChar(hexchars[checksum & 0xf]);
+
+    }
+  while ((getDebugChar() & 0x7f) != '+');
+}
+
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+   error.  */
+static volatile int mem_err = 0;
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null), in case of mem fault,
+ * return 0.
+ * If MAY_FAULT is non-zero, then we will handle memory faults by returning
+ * a 0, else treat a fault like any other fault in the stub.
+ */
+
+static unsigned char *
+mem2hex(mem, buf, count, may_fault)
+     unsigned char *mem;
+     unsigned char *buf;
+     int count;
+     int may_fault;
+{
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  while (count-- > 0)
+    {
+      ch = *mem++;
+      if (mem_err)
+	return 0;
+      *buf++ = hexchars[ch >> 4];
+      *buf++ = hexchars[ch & 0xf];
+    }
+
+  *buf = 0;
+
+  set_mem_fault_trap(0);
+
+  return buf;
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written */
+
+static char *
+hex2mem(buf, mem, count, may_fault)
+     unsigned char *buf;
+     unsigned char *mem;
+     int count;
+     int may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  for (i=0; i<count; i++)
+    {
+      ch = hex(*buf++) << 4;
+      ch |= hex(*buf++);
+      *mem++ = ch;
+      if (mem_err)
+	return 0;
+    }
+
+  set_mem_fault_trap(0);
+
+  return mem;
+}
+
+/* This table contains the mapping between SPARC hardware trap types, and
+   signals, which are primarily what GDB understands.  It also indicates
+   which hardware traps we need to commandeer when initializing the stub. */
+
+static struct hard_trap_info
+{
+  unsigned char tt;		/* Trap type code for SPARClite */
+  unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+  {1, SIGSEGV},			/* instruction access error */
+  {2, SIGILL},			/* privileged instruction */
+  {3, SIGILL},			/* illegal instruction */
+  {4, SIGEMT},			/* fp disabled */
+  {36, SIGEMT},			/* cp disabled */
+  {7, SIGBUS},			/* mem address not aligned */
+  {9, SIGSEGV},			/* data access exception */
+  {10, SIGEMT},			/* tag overflow */
+  {128+1, SIGTRAP},		/* ta 1 - normal breakpoint instruction */
+  {0, 0}			/* Must be last */
+};
+
+/* Set up exception handlers for tracing and breakpoints */
+
+void
+set_debug_traps()
+{
+  struct hard_trap_info *ht;
+
+  for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+    exceptionHandler(ht->tt, trap_low);
+
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+
+  putDebugChar ('+');
+
+  initialized = 1;
+}
+
+asm ("
+! Trap handler for memory errors.  This just sets mem_err to be non-zero.  It
+! assumes that %l1 is non-zero.  This should be safe, as it is doubtful that
+! 0 would ever contain code that could mem fault.  This routine will skip
+! past the faulting instruction after setting mem_err.
+
+	.text
+	.align 4
+
+_fltr_set_mem_err:
+	sethi %hi(_mem_err), %l0
+	st %l1, [%l0 + %lo(_mem_err)]
+	jmpl %l2, %g0
+	rett %l2+4
+");
+
+static void
+set_mem_fault_trap(enable)
+     int enable;
+{
+  extern void fltr_set_mem_err();
+  mem_err = 0;
+
+  if (enable)
+    exceptionHandler(9, fltr_set_mem_err);
+  else
+    exceptionHandler(9, trap_low);
+}
+
+/* Convert the SPARC hardware trap type code to a unix signal number. */
+
+static int
+computeSignal(tt)
+     int tt;
+{
+  struct hard_trap_info *ht;
+
+  for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+    if (ht->tt == tt)
+      return ht->signo;
+
+  return SIGHUP;		/* default for things we don't know about */
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+
+static int
+hexToInt(char **ptr, int *intValue)
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+
+  while (**ptr)
+    {
+      hexValue = hex(**ptr);
+      if (hexValue < 0)
+	break;
+
+      *intValue = (*intValue << 4) | hexValue;
+      numChars ++;
+
+      (*ptr)++;
+    }
+
+  return (numChars);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.  It
+ * returns 1 if you should skip the instruction at the trap address, 0
+ * otherwise.
+ */
+
+extern void breakinst();
+
+static void
+handle_exception (registers)
+     unsigned long *registers;
+{
+  int tt;			/* Trap type */
+  int sigval;
+  int addr;
+  int length;
+  char *ptr;
+  unsigned long *sp;
+
+/* First, we must force all of the windows to be spilled out */
+
+  asm("	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+");
+
+  if (registers[PC] == (unsigned long)breakinst)
+    {
+      registers[PC] = registers[NPC];
+      registers[NPC] += 4;
+    }
+
+  sp = (unsigned long *)registers[SP];
+
+  tt = (registers[TBR] >> 4) & 0xff;
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal(tt);
+  ptr = remcomOutBuffer;
+
+  *ptr++ = 'T';
+  *ptr++ = hexchars[sigval >> 4];
+  *ptr++ = hexchars[sigval & 0xf];
+
+  *ptr++ = hexchars[PC >> 4];
+  *ptr++ = hexchars[PC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[PC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[FP >> 4];
+  *ptr++ = hexchars[FP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[SP >> 4];
+  *ptr++ = hexchars[SP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&sp, ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[NPC >> 4];
+  *ptr++ = hexchars[NPC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[NPC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[O7 >> 4];
+  *ptr++ = hexchars[O7 & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[O7], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = 0;
+
+  putpacket(remcomOutBuffer);
+
+  while (1)
+    {
+      remcomOutBuffer[0] = 0;
+
+      getpacket(remcomInBuffer);
+      switch (remcomInBuffer[0])
+	{
+	case '?':
+	  remcomOutBuffer[0] = 'S';
+	  remcomOutBuffer[1] = hexchars[sigval >> 4];
+	  remcomOutBuffer[2] = hexchars[sigval & 0xf];
+	  remcomOutBuffer[3] = 0;
+	  break;
+
+	case 'd':
+				/* toggle debug flag */
+	  break;
+
+	case 'g':		/* return the value of the CPU registers */
+	  {
+	    ptr = remcomOutBuffer;
+	    ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */
+	    ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */
+	    memset(ptr, '0', 32 * 8); /* Floating point */
+	    mem2hex((char *)&registers[Y],
+		    ptr + 32 * 4 * 2,
+		    8 * 4,
+		    0);		/* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
+	  }
+	  break;
+
+	case 'G':	   /* set the value of the CPU registers - return OK */
+	  {
+	    unsigned long *newsp, psr;
+
+	    psr = registers[PSR];
+
+	    ptr = &remcomInBuffer[1];
+	    hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */
+	    hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */
+	    hex2mem(ptr + 64 * 4 * 2, (char *)&registers[Y],
+		    8 * 4, 0);	/* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
+
+	    /* See if the stack pointer has moved.  If so, then copy the saved
+	       locals and ins to the new location.  This keeps the window
+	       overflow and underflow routines happy.  */
+
+	    newsp = (unsigned long *)registers[SP];
+	    if (sp != newsp)
+	      sp = memcpy(newsp, sp, 16 * 4);
+
+	    /* Don't allow CWP to be modified. */
+
+	    if (psr != registers[PSR])
+	      registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f);
+
+	    strcpy(remcomOutBuffer,"OK");
+	  }
+	  break;
+
+	case 'm':	  /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+	  /* Try to read %x,%x.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length))
+	    {
+	      if (mem2hex((char *)addr, remcomOutBuffer, length, 1))
+		break;
+
+	      strcpy (remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer,"E01");
+	  break;
+
+	case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+	  /* Try to read '%x,%x:'.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length)
+	      && *ptr++ == ':')
+	    {
+	      if (hex2mem(ptr, (char *)addr, length, 1))
+		strcpy(remcomOutBuffer, "OK");
+	      else
+		strcpy(remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer, "E02");
+	  break;
+
+	case 'c':    /* cAA..AA    Continue at address AA..AA(optional) */
+	  /* try to read optional parameter, pc unchanged if no parm */
+
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr, &addr))
+	    {
+	      registers[PC] = addr;
+	      registers[NPC] = addr + 4;
+	    }
+
+/* Need to flush the instruction cache here, as we may have deposited a
+   breakpoint, and the icache probably has no way of knowing that a data ref to
+   some location may have changed something that is in the instruction cache.
+ */
+
+	  flush_i_cache();
+	  return;
+
+	  /* kill the program */
+	case 'k' :		/* do nothing */
+	  break;
+#if 0
+	case 't':		/* Test feature */
+	  asm (" std %f30,[%sp]");
+	  break;
+#endif
+	case 'r':		/* Reset */
+	  asm ("call 0
+		nop ");
+	  break;
+
+#if 0
+Disabled until we can unscrew this properly
+
+	case 'b':	  /* bBB...  Set baud rate to BB... */
+	  {
+	    int baudrate;
+	    extern void set_timer_3();
+
+	    ptr = &remcomInBuffer[1];
+	    if (!hexToInt(&ptr, &baudrate))
+	      {
+		strcpy(remcomOutBuffer,"B01");
+		break;
+	      }
+
+	    /* Convert baud rate to uart clock divider */
+	    switch (baudrate)
+	      {
+	      case 38400:
+		baudrate = 16;
+		break;
+	      case 19200:
+		baudrate = 33;
+		break;
+	      case 9600:
+		baudrate = 65;
+		break;
+	      default:
+		strcpy(remcomOutBuffer,"B02");
+		goto x1;
+	      }
+
+	    putpacket("OK");	/* Ack before changing speed */
+	    set_timer_3(baudrate); /* Set it */
+	  }
+x1:	  break;
+#endif
+	}			/* switch */
+
+      /* reply to the request */
+      putpacket(remcomOutBuffer);
+    }
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint()
+{
+  if (!initialized)
+    return;
+
+  asm("	.globl _breakinst
+
+	_breakinst: ta 1
+      ");
+}
diff --git a/gdb/sparc-tdep.c b/gdb/sparc-tdep.c
new file mode 100644
index 0000000..113b32c
--- /dev/null
+++ b/gdb/sparc-tdep.c
@@ -0,0 +1,2120 @@
+/* Target-dependent code for the SPARC for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* ??? Support for calling functions from gdb in sparc64 is unfinished.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+
+#ifdef	USE_PROC_FS
+#include <sys/procfs.h>
+#endif
+
+#include "gdbcore.h"
+
+#if defined(TARGET_SPARCLET) || defined(TARGET_SPARCLITE)
+#define SPARC_HAS_FPU 0
+#else
+#define SPARC_HAS_FPU 1
+#endif
+
+#ifdef GDB_TARGET_IS_SPARC64
+#define FP_REGISTER_BYTES (64 * 4)
+#else
+#define FP_REGISTER_BYTES (32 * 4)
+#endif
+
+/* If not defined, assume 32 bit sparc.  */
+#ifndef FP_MAX_REGNUM
+#define FP_MAX_REGNUM (FP0_REGNUM + 32)
+#endif
+
+#define SPARC_INTREG_SIZE (REGISTER_RAW_SIZE (G0_REGNUM))
+
+/* From infrun.c */
+extern int stop_after_trap;
+
+/* We don't store all registers immediately when requested, since they
+   get sent over in large chunks anyway.  Instead, we accumulate most
+   of the changes and send them over once.  "deferred_stores" keeps
+   track of which sets of registers we have locally-changed copies of,
+   so we only need send the groups that have changed.  */
+
+int deferred_stores = 0;	/* Cumulates stores we want to do eventually. */
+
+
+/* Some machines, such as Fujitsu SPARClite 86x, have a bi-endian mode
+   where instructions are big-endian and data are little-endian.
+   This flag is set when we detect that the target is of this type. */
+
+int bi_endian = 0;
+
+
+/* Fetch a single instruction.  Even on bi-endian machines
+   such as sparc86x, instructions are always big-endian.  */
+
+static unsigned long
+fetch_instruction (pc)
+     CORE_ADDR pc;
+{
+  unsigned long retval;
+  int i;
+  unsigned char buf[4];
+
+  read_memory (pc, buf, sizeof (buf));
+
+  /* Start at the most significant end of the integer, and work towards
+     the least significant.  */
+  retval = 0;
+  for (i = 0; i < sizeof (buf); ++i)
+    retval = (retval << 8) | buf[i];
+  return retval;
+}
+
+
+/* Branches with prediction are treated like their non-predicting cousins.  */
+/* FIXME: What about floating point branches?  */
+
+/* Macros to extract fields from sparc instructions.  */
+#define X_OP(i) (((i) >> 30) & 0x3)
+#define X_RD(i) (((i) >> 25) & 0x1f)
+#define X_A(i) (((i) >> 29) & 1)
+#define X_COND(i) (((i) >> 25) & 0xf)
+#define X_OP2(i) (((i) >> 22) & 0x7)
+#define X_IMM22(i) ((i) & 0x3fffff)
+#define X_OP3(i) (((i) >> 19) & 0x3f)
+#define X_RS1(i) (((i) >> 14) & 0x1f)
+#define X_I(i) (((i) >> 13) & 1)
+#define X_IMM13(i) ((i) & 0x1fff)
+/* Sign extension macros.  */
+#define X_SIMM13(i) ((X_IMM13 (i) ^ 0x1000) - 0x1000)
+#define X_DISP22(i) ((X_IMM22 (i) ^ 0x200000) - 0x200000)
+#define X_CC(i) (((i) >> 20) & 3)
+#define X_P(i) (((i) >> 19) & 1)
+#define X_DISP19(i) ((((i) & 0x7ffff) ^ 0x40000) - 0x40000)
+#define X_RCOND(i) (((i) >> 25) & 7)
+#define X_DISP16(i) ((((((i) >> 6) && 0xc000) | ((i) & 0x3fff)) ^ 0x8000) - 0x8000)
+#define X_FCN(i) (((i) >> 25) & 31)
+
+typedef enum
+{
+  Error, not_branch, bicc, bicca, ba, baa, ticc, ta,
+#ifdef GDB_TARGET_IS_SPARC64
+  done_retry
+#endif
+} branch_type;
+
+/* Simulate single-step ptrace call for sun4.  Code written by Gary
+   Beihl (beihl@mcc.com).  */
+
+/* npc4 and next_pc describe the situation at the time that the
+   step-breakpoint was set, not necessary the current value of NPC_REGNUM.  */
+static CORE_ADDR next_pc, npc4, target;
+static int brknpc4, brktrg;
+typedef char binsn_quantum[BREAKPOINT_MAX];
+static binsn_quantum break_mem[3];
+
+static branch_type isbranch PARAMS ((long, CORE_ADDR, CORE_ADDR *));
+
+/* single_step() is called just before we want to resume the inferior,
+   if we want to single-step it but there is no hardware or kernel single-step
+   support (as on all SPARCs).  We find all the possible targets of the
+   coming instruction and breakpoint them.
+
+   single_step is also called just after the inferior stops.  If we had
+   set up a simulated single-step, we undo our damage.  */
+
+void
+sparc_software_single_step (ignore, insert_breakpoints_p)
+     enum target_signal ignore; /* pid, but we don't need it */
+     int insert_breakpoints_p;
+{
+  branch_type br;
+  CORE_ADDR pc;
+  long pc_instruction;
+
+  if (insert_breakpoints_p)
+    {
+      /* Always set breakpoint for NPC.  */
+      next_pc = read_register (NPC_REGNUM);
+      npc4 = next_pc + 4; /* branch not taken */
+
+      target_insert_breakpoint (next_pc, break_mem[0]);
+      /* printf_unfiltered ("set break at %x\n",next_pc); */
+
+      pc = read_register (PC_REGNUM);
+      pc_instruction = fetch_instruction (pc);
+      br = isbranch (pc_instruction, pc, &target);
+      brknpc4 = brktrg = 0;
+
+      if (br == bicca)
+	{
+	  /* Conditional annulled branch will either end up at
+	     npc (if taken) or at npc+4 (if not taken).
+	     Trap npc+4.  */
+	  brknpc4 = 1;
+	  target_insert_breakpoint (npc4, break_mem[1]);
+	}
+      else if (br == baa && target != next_pc)
+	{
+	  /* Unconditional annulled branch will always end up at
+	     the target.  */
+	  brktrg = 1;
+	  target_insert_breakpoint (target, break_mem[2]);
+	}
+#ifdef GDB_TARGET_IS_SPARC64
+      else if (br == done_retry)
+	{
+	  brktrg = 1;
+	  target_insert_breakpoint (target, break_mem[2]);
+	}
+#endif
+    }
+  else
+    {
+      /* Remove breakpoints */
+      target_remove_breakpoint (next_pc, break_mem[0]);
+
+      if (brknpc4)
+	target_remove_breakpoint (npc4, break_mem[1]);
+
+      if (brktrg)
+	target_remove_breakpoint (target, break_mem[2]);
+    }
+}
+
+/* Call this for each newly created frame.  For SPARC, we need to calculate
+   the bottom of the frame, and do some extra work if the prologue
+   has been generated via the -mflat option to GCC.  In particular,
+   we need to know where the previous fp and the pc have been stashed,
+   since their exact position within the frame may vary.  */
+
+void
+sparc_init_extra_frame_info (fromleaf, fi)
+     int fromleaf;
+     struct frame_info *fi;
+{
+  char *name;
+  CORE_ADDR prologue_start, prologue_end;
+  int insn;
+
+  fi->bottom =
+    (fi->next ?
+     (fi->frame == fi->next->frame ? fi->next->bottom : fi->next->frame) :
+     read_sp ());
+
+  /* If fi->next is NULL, then we already set ->frame by passing read_fp()
+     to create_new_frame.  */
+  if (fi->next)
+    {
+      char buf[MAX_REGISTER_RAW_SIZE];
+
+      /* Compute ->frame as if not flat.  If it is flat, we'll change
+	 it later.  */
+      if (fi->next->next != NULL
+	  && (fi->next->next->signal_handler_caller
+	      || frame_in_dummy (fi->next->next))
+	  && frameless_look_for_prologue (fi->next))
+	{
+	  /* A frameless function interrupted by a signal did not change
+	     the frame pointer, fix up frame pointer accordingly.  */
+	  fi->frame = FRAME_FP (fi->next);
+	  fi->bottom = fi->next->bottom;
+	}
+      else
+	{
+	  /* Should we adjust for stack bias here? */
+	  get_saved_register (buf, 0, 0, fi, FP_REGNUM, 0);
+	  fi->frame = extract_address (buf, REGISTER_RAW_SIZE (FP_REGNUM));
+#ifdef GDB_TARGET_IS_SPARC64
+	  if (fi->frame & 1)
+	    fi->frame += 2047;
+#endif
+	  
+	}
+    }
+
+  /* Decide whether this is a function with a ``flat register window''
+     frame.  For such functions, the frame pointer is actually in %i7.  */
+  fi->flat = 0;
+  fi->in_prologue = 0;
+  if (find_pc_partial_function (fi->pc, &name, &prologue_start, &prologue_end))
+    {
+      /* See if the function starts with an add (which will be of a
+	 negative number if a flat frame) to the sp.  FIXME: Does not
+	 handle large frames which will need more than one instruction
+	 to adjust the sp.  */
+      insn = fetch_instruction (prologue_start, 4);
+      if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0
+	  && X_I (insn) && X_SIMM13 (insn) < 0)
+	{
+	  int offset = X_SIMM13 (insn);
+
+	  /* Then look for a save of %i7 into the frame.  */
+	  insn = fetch_instruction (prologue_start + 4);
+	  if (X_OP (insn) == 3
+	      && X_RD (insn) == 31
+	      && X_OP3 (insn) == 4
+	      && X_RS1 (insn) == 14)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      /* We definitely have a flat frame now.  */
+	      fi->flat = 1;
+
+	      fi->sp_offset = offset;
+
+	      /* Overwrite the frame's address with the value in %i7.  */
+	      get_saved_register (buf, 0, 0, fi, I7_REGNUM, 0);
+	      fi->frame = extract_address (buf, REGISTER_RAW_SIZE (I7_REGNUM));
+#ifdef GDB_TARGET_IS_SPARC64
+	      if (fi->frame & 1)
+		fi->frame += 2047;
+#endif
+	      /* Record where the fp got saved.  */
+	      fi->fp_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+
+	      /* Also try to collect where the pc got saved to.  */
+	      fi->pc_addr = 0;
+	      insn = fetch_instruction (prologue_start + 12);
+	      if (X_OP (insn) == 3
+		  && X_RD (insn) == 15
+		  && X_OP3 (insn) == 4
+		  && X_RS1 (insn) == 14)
+		fi->pc_addr = fi->frame + fi->sp_offset + X_SIMM13 (insn);
+	    }
+	}
+	else
+	  {
+	    /* Check if the PC is in the function prologue before a SAVE
+	       instruction has been executed yet.  If so, set the frame
+	       to the current value of the stack pointer and set
+	       the in_prologue flag.  */
+	    CORE_ADDR addr;
+	    struct symtab_and_line sal;
+
+	    sal = find_pc_line (prologue_start, 0);
+	    if (sal.line == 0)			/* no line info, use PC */
+	      prologue_end = fi->pc;
+	    else if (sal.end < prologue_end)
+	      prologue_end = sal.end;
+	    if (fi->pc < prologue_end)
+	      {
+		for (addr = prologue_start; addr < fi->pc; addr += 4)
+		  {
+		    insn = read_memory_integer (addr, 4);
+		    if (X_OP (insn) == 2 && X_OP3 (insn) == 0x3c)
+		      break;			/* SAVE seen, stop searching */
+		  }
+		if (addr >= fi->pc)
+		  {
+		    fi->in_prologue = 1;
+		    fi->frame = read_register (SP_REGNUM);
+		  }
+	      }
+	  }
+    }
+  if (fi->next && fi->frame == 0)
+    {
+      /* Kludge to cause init_prev_frame_info to destroy the new frame.  */
+      fi->frame = fi->next->frame;
+      fi->pc = fi->next->pc;
+    }
+}
+
+CORE_ADDR
+sparc_frame_chain (frame)
+     struct frame_info *frame;
+{
+  /* Value that will cause FRAME_CHAIN_VALID to not worry about the chain
+     value.  If it realy is zero, we detect it later in
+     sparc_init_prev_frame.  */
+  return (CORE_ADDR)1;
+}
+
+CORE_ADDR
+sparc_extract_struct_value_address (regbuf)
+     char regbuf[REGISTER_BYTES];
+{
+  return extract_address (regbuf + REGISTER_BYTE (O0_REGNUM),
+			  REGISTER_RAW_SIZE (O0_REGNUM));
+}
+
+/* Find the pc saved in frame FRAME.  */
+
+CORE_ADDR
+sparc_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  char buf[MAX_REGISTER_RAW_SIZE];
+  CORE_ADDR addr;
+
+  if (frame->signal_handler_caller)
+    {
+      /* This is the signal trampoline frame.
+	 Get the saved PC from the sigcontext structure.  */
+
+#ifndef SIGCONTEXT_PC_OFFSET
+#define SIGCONTEXT_PC_OFFSET 12
+#endif
+
+      CORE_ADDR sigcontext_addr;
+      char scbuf[TARGET_PTR_BIT / HOST_CHAR_BIT];
+      int saved_pc_offset = SIGCONTEXT_PC_OFFSET;
+      char *name = NULL;
+
+      /* Solaris2 ucbsigvechandler passes a pointer to a sigcontext
+	 as the third parameter.  The offset to the saved pc is 12.  */
+      find_pc_partial_function (frame->pc, &name,
+				(CORE_ADDR *)NULL,(CORE_ADDR *)NULL);
+      if (name && STREQ (name, "ucbsigvechandler"))
+	saved_pc_offset = 12;
+
+      /* The sigcontext address is contained in register O2.  */
+      get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
+			  frame, O0_REGNUM + 2, (enum lval_type *)NULL);
+      sigcontext_addr = extract_address (buf, REGISTER_RAW_SIZE (O0_REGNUM + 2));
+
+      /* Don't cause a memory_error when accessing sigcontext in case the
+	 stack layout has changed or the stack is corrupt.  */
+      target_read_memory (sigcontext_addr + saved_pc_offset,
+			  scbuf, sizeof (scbuf));
+      return extract_address (scbuf, sizeof (scbuf));
+    }
+  else if (frame->in_prologue ||
+	   (frame->next != NULL
+	    && (frame->next->signal_handler_caller
+	        || frame_in_dummy (frame->next))
+	    && frameless_look_for_prologue (frame)))
+    {
+      /* A frameless function interrupted by a signal did not save
+	 the PC, it is still in %o7.  */
+      get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
+			  frame, O7_REGNUM, (enum lval_type *)NULL);
+      return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
+    }
+  if (frame->flat)
+    addr = frame->pc_addr;
+  else
+    addr = frame->bottom + FRAME_SAVED_I0 +
+      SPARC_INTREG_SIZE * (I7_REGNUM - I0_REGNUM);
+
+  if (addr == 0)
+    /* A flat frame leaf function might not save the PC anywhere,
+       just leave it in %o7.  */
+    return PC_ADJUST (read_register (O7_REGNUM));
+
+  read_memory (addr, buf, SPARC_INTREG_SIZE);
+  return PC_ADJUST (extract_address (buf, SPARC_INTREG_SIZE));
+}
+
+/* Since an individual frame in the frame cache is defined by two
+   arguments (a frame pointer and a stack pointer), we need two
+   arguments to get info for an arbitrary stack frame.  This routine
+   takes two arguments and makes the cached frames look as if these
+   two arguments defined a frame on the cache.  This allows the rest
+   of info frame to extract the important arguments without
+   difficulty.  */
+
+struct frame_info *
+setup_arbitrary_frame (argc, argv)
+     int argc;
+     CORE_ADDR *argv;
+{
+  struct frame_info *frame;
+
+  if (argc != 2)
+    error ("Sparc frame specifications require two arguments: fp and sp");
+
+  frame = create_new_frame (argv[0], 0);
+
+  if (!frame)
+    fatal ("internal: create_new_frame returned invalid frame");
+  
+  frame->bottom = argv[1];
+  frame->pc = FRAME_SAVED_PC (frame);
+  return frame;
+}
+
+/* Given a pc value, skip it forward past the function prologue by
+   disassembling instructions that appear to be a prologue.
+
+   If FRAMELESS_P is set, we are only testing to see if the function
+   is frameless.  This allows a quicker answer.
+
+   This routine should be more specific in its actions; making sure
+   that it uses the same register in the initial prologue section.  */
+
+static CORE_ADDR examine_prologue PARAMS ((CORE_ADDR, int, struct frame_info *,
+					   struct frame_saved_regs *));
+
+static CORE_ADDR 
+examine_prologue (start_pc, frameless_p, fi, saved_regs)
+     CORE_ADDR start_pc;
+     int frameless_p;
+     struct frame_info *fi;
+     struct frame_saved_regs *saved_regs;
+{
+  int insn;
+  int dest = -1;
+  CORE_ADDR pc = start_pc;
+  int is_flat = 0;
+
+  insn = fetch_instruction (pc);
+
+  /* Recognize the `sethi' insn and record its destination.  */
+  if (X_OP (insn) == 0 && X_OP2 (insn) == 4)
+    {
+      dest = X_RD (insn);
+      pc += 4;
+      insn = fetch_instruction (pc);
+    }
+
+  /* Recognize an add immediate value to register to either %g1 or
+     the destination register recorded above.  Actually, this might
+     well recognize several different arithmetic operations.
+     It doesn't check that rs1 == rd because in theory "sub %g0, 5, %g1"
+     followed by "save %sp, %g1, %sp" is a valid prologue (Not that
+     I imagine any compiler really does that, however).  */
+  if (X_OP (insn) == 2
+      && X_I (insn)
+      && (X_RD (insn) == 1 || X_RD (insn) == dest))
+    {
+      pc += 4;
+      insn = fetch_instruction (pc);
+    }
+
+  /* Recognize any SAVE insn.  */
+  if (X_OP (insn) == 2 && X_OP3 (insn) == 60)
+    {
+      pc += 4;
+      if (frameless_p)			/* If the save is all we care about, */
+	return pc;			/* return before doing more work */
+      insn = fetch_instruction (pc);
+    }
+  /* Recognize add to %sp.  */
+  else if (X_OP (insn) == 2 && X_RD (insn) == 14 && X_OP3 (insn) == 0)
+    {
+      pc += 4;
+      if (frameless_p)			/* If the add is all we care about, */
+	return pc;			/* return before doing more work */
+      is_flat = 1;
+      insn = fetch_instruction (pc);
+      /* Recognize store of frame pointer (i7).  */
+      if (X_OP (insn) == 3
+	  && X_RD (insn) == 31
+	  && X_OP3 (insn) == 4
+	  && X_RS1 (insn) == 14)
+	{
+	  pc += 4;
+	  insn = fetch_instruction (pc);
+
+	  /* Recognize sub %sp, <anything>, %i7.  */
+	  if (X_OP (insn) ==  2
+	      && X_OP3 (insn) == 4
+	      && X_RS1 (insn) == 14
+	      && X_RD (insn) == 31)
+	    {
+	      pc += 4;
+	      insn = fetch_instruction (pc);
+	    }
+	  else
+	    return pc;
+	}
+      else
+	return pc;
+    }
+  else
+    /* Without a save or add instruction, it's not a prologue.  */
+    return start_pc;
+
+  while (1)
+    {
+      /* Recognize stores into the frame from the input registers.
+	 This recognizes all non alternate stores of input register,
+	 into a location offset from the frame pointer.  */
+      if ((X_OP (insn) == 3
+	   && (X_OP3 (insn) & 0x3c) == 4 /* Store, non-alternate.  */
+	   && (X_RD (insn) & 0x18) == 0x18 /* Input register.  */
+	   && X_I (insn)		/* Immediate mode.  */
+	   && X_RS1 (insn) == 30	/* Off of frame pointer.  */
+	   /* Into reserved stack space.  */
+	   && X_SIMM13 (insn) >= 0x44
+	   && X_SIMM13 (insn) < 0x5b))
+	;
+      else if (is_flat
+	       && X_OP (insn) == 3
+	       && X_OP3 (insn) == 4
+	       && X_RS1 (insn) == 14
+	       )
+	{
+	  if (saved_regs && X_I (insn))
+	    saved_regs->regs[X_RD (insn)] =
+	      fi->frame + fi->sp_offset + X_SIMM13 (insn);
+	}
+      else
+	break;
+      pc += 4;
+      insn = fetch_instruction (pc);
+    }
+
+  return pc;
+}
+
+CORE_ADDR 
+skip_prologue (start_pc, frameless_p)
+     CORE_ADDR start_pc;
+     int frameless_p;
+{
+  return examine_prologue (start_pc, frameless_p, NULL, NULL);
+}
+
+/* Check instruction at ADDR to see if it is a branch.
+   All non-annulled instructions will go to NPC or will trap.
+   Set *TARGET if we find a candidate branch; set to zero if not.
+
+   This isn't static as it's used by remote-sa.sparc.c.  */
+
+static branch_type
+isbranch (instruction, addr, target)
+     long instruction;
+     CORE_ADDR addr, *target;
+{
+  branch_type val = not_branch;
+  long int offset = 0;		/* Must be signed for sign-extend.  */
+
+  *target = 0;
+
+  if (X_OP (instruction) == 0
+      && (X_OP2 (instruction) == 2
+	  || X_OP2 (instruction) == 6
+	  || X_OP2 (instruction) == 1
+	  || X_OP2 (instruction) == 3
+	  || X_OP2 (instruction) == 5
+#ifndef GDB_TARGET_IS_SPARC64
+	  || X_OP2 (instruction) == 7
+#endif
+	  ))
+    {
+      if (X_COND (instruction) == 8)
+	val = X_A (instruction) ? baa : ba;
+      else
+	val = X_A (instruction) ? bicca : bicc;
+      switch (X_OP2 (instruction))
+	{
+	case 2:
+	case 6:
+#ifndef GDB_TARGET_IS_SPARC64
+	case 7:
+#endif
+	  offset = 4 * X_DISP22 (instruction);
+	  break;
+	case 1:
+	case 5:
+	  offset = 4 * X_DISP19 (instruction);
+	  break;
+	case 3:
+	  offset = 4 * X_DISP16 (instruction);
+	  break;
+	}
+      *target = addr + offset;
+    }
+#ifdef GDB_TARGET_IS_SPARC64
+  else if (X_OP (instruction) == 2
+	   && X_OP3 (instruction) == 62)
+    {
+      if (X_FCN (instruction) == 0)
+	{
+	  /* done */
+	  *target = read_register (TNPC_REGNUM);
+	  val = done_retry;
+	}
+      else if (X_FCN (instruction) == 1)
+	{
+	  /* retry */
+	  *target = read_register (TPC_REGNUM);
+	  val = done_retry;
+	}
+    }
+#endif
+
+  return val;
+}
+
+/* Find register number REGNUM relative to FRAME and put its
+   (raw) contents in *RAW_BUFFER.  Set *OPTIMIZED if the variable
+   was optimized out (and thus can't be fetched).  If the variable
+   was fetched from memory, set *ADDRP to where it was fetched from,
+   otherwise it was fetched from a register.
+
+   The argument RAW_BUFFER must point to aligned memory.  */
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  struct frame_info *frame1;
+  CORE_ADDR addr;
+
+  if (!target_has_registers)
+    error ("No registers.");
+
+  if (optimized)
+    *optimized = 0;
+
+  addr = 0;
+
+  /* FIXME This code extracted from infcmd.c; should put elsewhere! */
+  if (frame == NULL)
+    {
+      /* error ("No selected frame."); */
+      if (!target_has_registers)
+        error ("The program has no registers now.");
+      if (selected_frame == NULL) 
+        error ("No selected frame.");
+      /* Try to use selected frame */
+      frame = get_prev_frame (selected_frame);  
+      if (frame == 0)
+        error ("Cmd not meaningful in the outermost frame."); 
+    }
+
+
+  frame1 = frame->next;
+
+  /* Get saved PC from the frame info if not in innermost frame.  */
+  if (regnum == PC_REGNUM && frame1 != NULL)
+    {
+      if (lval != NULL)
+	*lval = not_lval;
+      if (raw_buffer != NULL)
+	{
+	  /* Put it back in target format.  */
+	  store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), frame->pc);
+	}
+      if (addrp != NULL)
+	*addrp = 0;
+      return;
+    }
+
+  while (frame1 != NULL)
+    {
+      if (frame1->pc >= (frame1->bottom ? frame1->bottom :
+			 read_sp ())
+	  && frame1->pc <= FRAME_FP (frame1))
+	{
+	  /* Dummy frame.  All but the window regs are in there somewhere.
+	     The window registers are saved on the stack, just like in a
+	     normal frame.  */
+	  if (regnum >= G1_REGNUM && regnum < G1_REGNUM + 7)
+	    addr = frame1->frame + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 8 * SPARC_INTREG_SIZE);
+	  else if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_I0);
+	  else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_L0);
+	  else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+	    addr = frame1->frame + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 16 * SPARC_INTREG_SIZE);
+#ifdef FP0_REGNUM
+	  else if (regnum >= FP0_REGNUM && regnum < FP0_REGNUM + 32)
+	    addr = frame1->frame + (regnum - FP0_REGNUM) * 4
+	      - (FP_REGISTER_BYTES);
+#ifdef GDB_TARGET_IS_SPARC64
+	  else if (regnum >= FP0_REGNUM + 32 && regnum < FP_MAX_REGNUM)
+	    addr = frame1->frame + 32 * 4 + (regnum - FP0_REGNUM - 32) * 8
+	      - (FP_REGISTER_BYTES);
+#endif
+#endif /* FP0_REGNUM */
+	  else if (regnum >= Y_REGNUM && regnum < NUM_REGS)
+	    addr = frame1->frame + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE
+	      - (FP_REGISTER_BYTES + 24 * SPARC_INTREG_SIZE);
+	}
+      else if (frame1->flat)
+	{
+
+	  if (regnum == RP_REGNUM)
+	    addr = frame1->pc_addr;
+	  else if (regnum == I7_REGNUM)
+	    addr = frame1->fp_addr;
+	  else
+	    {
+	      CORE_ADDR func_start;
+	      struct frame_saved_regs regs;
+	      memset (&regs, 0, sizeof (regs));
+
+	      find_pc_partial_function (frame1->pc, NULL, &func_start, NULL);
+	      examine_prologue (func_start, 0, frame1, &regs);
+	      addr = regs.regs[regnum];
+	    }
+	}
+      else
+	{
+	  /* Normal frame.  Local and In registers are saved on stack.  */
+	  if (regnum >= I0_REGNUM && regnum < I0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_I0);
+	  else if (regnum >= L0_REGNUM && regnum < L0_REGNUM + 8)
+	    addr = (frame1->prev->bottom
+		    + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+		    + FRAME_SAVED_L0);
+	  else if (regnum >= O0_REGNUM && regnum < O0_REGNUM + 8)
+	    {
+	      /* Outs become ins.  */
+	      get_saved_register (raw_buffer, optimized, addrp, frame1,
+				  (regnum - O0_REGNUM + I0_REGNUM), lval);
+	      return;
+	    }
+	}
+      if (addr != 0)
+	break;
+      frame1 = frame1->next;
+    }
+  if (addr != 0)
+    {
+      if (lval != NULL)
+	*lval = lval_memory;
+      if (regnum == SP_REGNUM)
+	{
+	  if (raw_buffer != NULL)
+	    {
+	      /* Put it back in target format.  */
+	      store_address (raw_buffer, REGISTER_RAW_SIZE (regnum), addr);
+	    }
+	  if (addrp != NULL)
+	    *addrp = 0;
+	  return;
+	}
+      if (raw_buffer != NULL)
+	read_memory (addr, raw_buffer, REGISTER_RAW_SIZE (regnum));
+    }
+  else
+    {
+      if (lval != NULL)
+	*lval = lval_register;
+      addr = REGISTER_BYTE (regnum);
+      if (raw_buffer != NULL)
+	read_register_gen (regnum, raw_buffer);
+    }
+  if (addrp != NULL)
+    *addrp = addr;
+}
+
+/* Push an empty stack frame, and record in it the current PC, regs, etc.
+
+   We save the non-windowed registers and the ins.  The locals and outs
+   are new; they don't need to be saved. The i's and l's of
+   the last frame were already saved on the stack.  */
+
+/* Definitely see tm-sparc.h for more doc of the frame format here.  */
+
+#ifdef GDB_TARGET_IS_SPARC64
+#define DUMMY_REG_SAVE_OFFSET (128 + 16)
+#else
+#define DUMMY_REG_SAVE_OFFSET 0x60
+#endif
+
+/* See tm-sparc.h for how this is calculated.  */
+#ifdef FP0_REGNUM
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) + FP_REGISTER_BYTES)
+#else
+#define DUMMY_STACK_REG_BUF_SIZE \
+(((8+8+8) * SPARC_INTREG_SIZE) )
+#endif /* FP0_REGNUM */
+#define DUMMY_STACK_SIZE (DUMMY_STACK_REG_BUF_SIZE + DUMMY_REG_SAVE_OFFSET)
+
+void
+sparc_push_dummy_frame ()
+{
+  CORE_ADDR sp, old_sp;
+  char register_temp[DUMMY_STACK_SIZE];
+
+  old_sp = sp = read_sp ();
+
+#ifdef GDB_TARGET_IS_SPARC64
+  /* PC, NPC, CCR, FSR, FPRS, Y, ASI */
+  read_register_bytes (REGISTER_BYTE (PC_REGNUM), &register_temp[0],
+		       REGISTER_RAW_SIZE (PC_REGNUM) * 7);
+  read_register_bytes (REGISTER_BYTE (PSTATE_REGNUM), &register_temp[8],
+		       REGISTER_RAW_SIZE (PSTATE_REGNUM));
+  /* FIXME: not sure what needs to be saved here.  */
+#else
+  /* Y, PS, WIM, TBR, PC, NPC, FPS, CPS regs */
+  read_register_bytes (REGISTER_BYTE (Y_REGNUM), &register_temp[0],
+		       REGISTER_RAW_SIZE (Y_REGNUM) * 8);
+#endif
+
+  read_register_bytes (REGISTER_BYTE (O0_REGNUM),
+		       &register_temp[8 * SPARC_INTREG_SIZE],
+		       SPARC_INTREG_SIZE * 8);
+
+  read_register_bytes (REGISTER_BYTE (G0_REGNUM),
+		       &register_temp[16 * SPARC_INTREG_SIZE],
+		       SPARC_INTREG_SIZE * 8);
+
+#ifdef FP0_REGNUM
+  read_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+		       &register_temp[24 * SPARC_INTREG_SIZE],
+		       FP_REGISTER_BYTES);
+#endif /* FP0_REGNUM */
+
+  sp -= DUMMY_STACK_SIZE;
+
+  write_sp (sp);
+
+  write_memory (sp + DUMMY_REG_SAVE_OFFSET, &register_temp[0],
+		DUMMY_STACK_REG_BUF_SIZE);
+
+  if (strcmp (target_shortname, "sim") != 0)
+    {
+      write_fp (old_sp);
+
+      /* Set return address register for the call dummy to the current PC.  */
+      write_register (I7_REGNUM, read_pc() - 8);
+    }
+  else
+    {
+      /* The call dummy will write this value to FP before executing
+         the 'save'.  This ensures that register window flushes work
+	 correctly in the simulator.  */
+      write_register (G0_REGNUM+1, read_register (FP_REGNUM));
+    
+      /* The call dummy will write this value to FP after executing
+         the 'save'. */
+      write_register (G0_REGNUM+2, old_sp);
+    
+      /* The call dummy will write this value to the return address (%i7) after
+	 executing the 'save'. */
+      write_register (G0_REGNUM+3, read_pc() - 8);
+    
+      /* Set the FP that the call dummy will be using after the 'save'.
+	 This makes backtraces from an inferior function call work properly.  */
+      write_register (FP_REGNUM, old_sp);
+    }
+}
+
+/* sparc_frame_find_saved_regs ().  This function is here only because
+   pop_frame uses it.  Note there is an interesting corner case which
+   I think few ports of GDB get right--if you are popping a frame
+   which does not save some register that *is* saved by a more inner
+   frame (such a frame will never be a dummy frame because dummy
+   frames save all registers).  Rewriting pop_frame to use
+   get_saved_register would solve this problem and also get rid of the
+   ugly duplication between sparc_frame_find_saved_regs and
+   get_saved_register.
+
+   Stores, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   Note that on register window machines, we are currently making the
+   assumption that window registers are being saved somewhere in the
+   frame in which they are being used.  If they are stored in an
+   inferior frame, find_saved_register will break.
+
+   On the Sun 4, the only time all registers are saved is when
+   a dummy frame is involved.  Otherwise, the only saved registers
+   are the LOCAL and IN registers which are saved as a result
+   of the "save/restore" opcodes.  This condition is determined
+   by address rather than by value.
+
+   The "pc" is not stored in a frame on the SPARC.  (What is stored
+   is a return address minus 8.)  sparc_pop_frame knows how to
+   deal with that.  Other routines might or might not.
+
+   See tm-sparc.h (PUSH_DUMMY_FRAME and friends) for CRITICAL information
+   about how this works.  */
+
+static void sparc_frame_find_saved_regs PARAMS ((struct frame_info *,
+						 struct frame_saved_regs *));
+
+static void
+sparc_frame_find_saved_regs (fi, saved_regs_addr)
+     struct frame_info *fi;
+     struct frame_saved_regs *saved_regs_addr;
+{
+  register int regnum;
+  CORE_ADDR frame_addr = FRAME_FP (fi);
+
+  if (!fi)
+    fatal ("Bad frame info struct in FRAME_FIND_SAVED_REGS");
+
+  memset (saved_regs_addr, 0, sizeof (*saved_regs_addr));
+
+  if (fi->pc >= (fi->bottom ? fi->bottom :
+		   read_sp ())
+      && fi->pc <= FRAME_FP(fi))
+    {
+      /* Dummy frame.  All but the window regs are in there somewhere. */
+      for (regnum = G1_REGNUM; regnum < G1_REGNUM+7; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - G0_REGNUM) * SPARC_INTREG_SIZE
+	    - DUMMY_STACK_REG_BUF_SIZE + 16 * SPARC_INTREG_SIZE;
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+	    - DUMMY_STACK_REG_BUF_SIZE + 8 * SPARC_INTREG_SIZE;
+#ifdef FP0_REGNUM
+      for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 32; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - FP0_REGNUM) * 4
+	    - DUMMY_STACK_REG_BUF_SIZE + 24 * SPARC_INTREG_SIZE;
+#ifdef GDB_TARGET_IS_SPARC64
+      for (regnum = FP0_REGNUM + 32; regnum < FP_MAX_REGNUM; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + 32 * 4 + (regnum - FP0_REGNUM - 32) * 4
+	    - DUMMY_STACK_REG_BUF_SIZE + 24 * SPARC_INTREG_SIZE;
+#endif
+#endif /* FP0_REGNUM */
+#ifdef GDB_TARGET_IS_SPARC64
+      for (regnum = PC_REGNUM; regnum < PC_REGNUM + 7; regnum++)
+	{
+	  saved_regs_addr->regs[regnum] =
+	    frame_addr + (regnum - PC_REGNUM) * SPARC_INTREG_SIZE 
+	      - DUMMY_STACK_REG_BUF_SIZE;
+	}
+      saved_regs_addr->regs[PSTATE_REGNUM] = 
+	frame_addr + 8 * SPARC_INTREG_SIZE - DUMMY_STACK_REG_BUF_SIZE;
+#else
+      for (regnum = Y_REGNUM; regnum < NUM_REGS; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  frame_addr + (regnum - Y_REGNUM) * SPARC_INTREG_SIZE 
+	    - DUMMY_STACK_REG_BUF_SIZE;
+#endif
+      frame_addr = fi->bottom ?
+	fi->bottom : read_sp ();
+    }
+  else if (fi->flat)
+    {
+      CORE_ADDR func_start;
+      find_pc_partial_function (fi->pc, NULL, &func_start, NULL);
+      examine_prologue (func_start, 0, fi, saved_regs_addr);
+
+      /* Flat register window frame.  */
+      saved_regs_addr->regs[RP_REGNUM] = fi->pc_addr;
+      saved_regs_addr->regs[I7_REGNUM] = fi->fp_addr;
+    }
+  else
+    {
+      /* Normal frame.  Just Local and In registers */
+      frame_addr = fi->bottom ?
+	fi->bottom : read_sp ();
+      for (regnum = L0_REGNUM; regnum < L0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  (frame_addr + (regnum - L0_REGNUM) * SPARC_INTREG_SIZE
+	   + FRAME_SAVED_L0);
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM+8; regnum++)
+	saved_regs_addr->regs[regnum] =
+	  (frame_addr + (regnum - I0_REGNUM) * SPARC_INTREG_SIZE
+	   + FRAME_SAVED_I0);
+    }
+  if (fi->next)
+    {
+      if (fi->flat)
+	{
+	  saved_regs_addr->regs[O7_REGNUM] = fi->pc_addr;
+	}
+      else
+	{
+	  /* Pull off either the next frame pointer or the stack pointer */
+	  CORE_ADDR next_next_frame_addr =
+	    (fi->next->bottom ?
+	     fi->next->bottom :
+	     read_sp ());
+	  for (regnum = O0_REGNUM; regnum < O0_REGNUM+8; regnum++)
+	    saved_regs_addr->regs[regnum] =
+	      (next_next_frame_addr
+	       + (regnum - O0_REGNUM) * SPARC_INTREG_SIZE
+	       + FRAME_SAVED_I0);
+	}
+    }
+  /* Otherwise, whatever we would get from ptrace(GETREGS) is accurate */
+  /* FIXME -- should this adjust for the sparc64 offset? */
+  saved_regs_addr->regs[SP_REGNUM] = FRAME_FP (fi);
+}
+
+/* Discard from the stack the innermost frame, restoring all saved registers.
+
+   Note that the values stored in fsr by get_frame_saved_regs are *in
+   the context of the called frame*.  What this means is that the i
+   regs of fsr must be restored into the o regs of the (calling) frame that
+   we pop into.  We don't care about the output regs of the calling frame,
+   since unless it's a dummy frame, it won't have any output regs in it.
+
+   We never have to bother with %l (local) regs, since the called routine's
+   locals get tossed, and the calling routine's locals are already saved
+   on its stack.  */
+
+/* Definitely see tm-sparc.h for more doc of the frame format here.  */
+
+void
+sparc_pop_frame ()
+{
+  register struct frame_info *frame = get_current_frame ();
+  register CORE_ADDR pc;
+  struct frame_saved_regs fsr;
+  char raw_buffer[REGISTER_BYTES];
+  int regnum;
+
+  sparc_frame_find_saved_regs (frame, &fsr);
+#ifdef FP0_REGNUM
+  if (fsr.regs[FP0_REGNUM])
+    {
+      read_memory (fsr.regs[FP0_REGNUM], raw_buffer, FP_REGISTER_BYTES);
+      write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
+			    raw_buffer, FP_REGISTER_BYTES);
+    }
+#ifndef GDB_TARGET_IS_SPARC64
+  if (fsr.regs[FPS_REGNUM])
+    {
+      read_memory (fsr.regs[FPS_REGNUM], raw_buffer, 4);
+      write_register_bytes (REGISTER_BYTE (FPS_REGNUM), raw_buffer, 4);
+    }
+  if (fsr.regs[CPS_REGNUM])
+    {
+      read_memory (fsr.regs[CPS_REGNUM], raw_buffer, 4);
+      write_register_bytes (REGISTER_BYTE (CPS_REGNUM), raw_buffer, 4);
+    }
+#endif
+#endif /* FP0_REGNUM */
+  if (fsr.regs[G1_REGNUM])
+    {
+      read_memory (fsr.regs[G1_REGNUM], raw_buffer, 7 * SPARC_INTREG_SIZE);
+      write_register_bytes (REGISTER_BYTE (G1_REGNUM), raw_buffer,
+			    7 * SPARC_INTREG_SIZE);
+    }
+
+  if (frame->flat)
+    {
+      /* Each register might or might not have been saved, need to test
+	 individually.  */
+      for (regnum = L0_REGNUM; regnum < L0_REGNUM + 8; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+      for (regnum = I0_REGNUM; regnum < I0_REGNUM + 8; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+
+      /* Handle all outs except stack pointer (o0-o5; o7).  */
+      for (regnum = O0_REGNUM; regnum < O0_REGNUM + 6; ++regnum)
+	if (fsr.regs[regnum])
+	  write_register (regnum, read_memory_integer (fsr.regs[regnum],
+						       SPARC_INTREG_SIZE));
+      if (fsr.regs[O0_REGNUM + 7])
+	write_register (O0_REGNUM + 7,
+			read_memory_integer (fsr.regs[O0_REGNUM + 7],
+					     SPARC_INTREG_SIZE));
+
+      write_sp (frame->frame);
+    }
+  else if (fsr.regs[I0_REGNUM])
+    {
+      CORE_ADDR sp;
+
+      char reg_temp[REGISTER_BYTES];
+
+      read_memory (fsr.regs[I0_REGNUM], raw_buffer, 8 * SPARC_INTREG_SIZE);
+
+      /* Get the ins and locals which we are about to restore.  Just
+	 moving the stack pointer is all that is really needed, except
+	 store_inferior_registers is then going to write the ins and
+	 locals from the registers array, so we need to muck with the
+	 registers array.  */
+      sp = fsr.regs[SP_REGNUM];
+#ifdef GDB_TARGET_IS_SPARC64
+      if (sp & 1)
+	sp += 2047;
+#endif
+      read_memory (sp, reg_temp, SPARC_INTREG_SIZE * 16);
+
+      /* Restore the out registers.
+	 Among other things this writes the new stack pointer.  */
+      write_register_bytes (REGISTER_BYTE (O0_REGNUM), raw_buffer,
+			    SPARC_INTREG_SIZE * 8);
+
+      write_register_bytes (REGISTER_BYTE (L0_REGNUM), reg_temp,
+			    SPARC_INTREG_SIZE * 16);
+    }
+#ifndef GDB_TARGET_IS_SPARC64
+  if (fsr.regs[PS_REGNUM])
+    write_register (PS_REGNUM, read_memory_integer (fsr.regs[PS_REGNUM], 4));
+#endif
+  if (fsr.regs[Y_REGNUM])
+    write_register (Y_REGNUM, read_memory_integer (fsr.regs[Y_REGNUM], REGISTER_RAW_SIZE (Y_REGNUM)));
+  if (fsr.regs[PC_REGNUM])
+    {
+      /* Explicitly specified PC (and maybe NPC) -- just restore them. */
+      write_register (PC_REGNUM, read_memory_integer (fsr.regs[PC_REGNUM],
+						      REGISTER_RAW_SIZE (PC_REGNUM)));
+      if (fsr.regs[NPC_REGNUM])
+	write_register (NPC_REGNUM,
+			read_memory_integer (fsr.regs[NPC_REGNUM],
+					     REGISTER_RAW_SIZE (NPC_REGNUM)));
+    }
+  else if (frame->flat)
+    {
+      if (frame->pc_addr)
+	pc = PC_ADJUST ((CORE_ADDR)
+			read_memory_integer (frame->pc_addr,
+					     REGISTER_RAW_SIZE (PC_REGNUM)));
+      else
+	{
+	  /* I think this happens only in the innermost frame, if so then
+	     it is a complicated way of saying
+	     "pc = read_register (O7_REGNUM);".  */
+	  char buf[MAX_REGISTER_RAW_SIZE];
+	  get_saved_register (buf, 0, 0, frame, O7_REGNUM, 0);
+	  pc = PC_ADJUST (extract_address
+			  (buf, REGISTER_RAW_SIZE (O7_REGNUM)));
+	}
+
+      write_register (PC_REGNUM,  pc);
+      write_register (NPC_REGNUM, pc + 4);
+    }
+  else if (fsr.regs[I7_REGNUM])
+    {
+      /* Return address in %i7 -- adjust it, then restore PC and NPC from it */
+      pc = PC_ADJUST ((CORE_ADDR) read_memory_integer (fsr.regs[I7_REGNUM],
+						       SPARC_INTREG_SIZE));
+      write_register (PC_REGNUM,  pc);
+      write_register (NPC_REGNUM, pc + 4);
+    }
+  flush_cached_frames ();
+}
+
+/* On the Sun 4 under SunOS, the compile will leave a fake insn which
+   encodes the structure size being returned.  If we detect such
+   a fake insn, step past it.  */
+
+CORE_ADDR
+sparc_pc_adjust(pc)
+     CORE_ADDR pc;
+{
+  unsigned long insn;
+  char buf[4];
+  int err;
+
+  err = target_read_memory (pc + 8, buf, 4);
+  insn = extract_unsigned_integer (buf, 4);
+  if ((err == 0) && (insn & 0xffc00000) == 0)
+    return pc+12;
+  else
+    return pc+8;
+}
+
+/* If pc is in a shared library trampoline, return its target.
+   The SunOs 4.x linker rewrites the jump table entries for PIC
+   compiled modules in the main executable to bypass the dynamic linker
+   with jumps of the form
+	sethi %hi(addr),%g1
+	jmp %g1+%lo(addr)
+   and removes the corresponding jump table relocation entry in the
+   dynamic relocations.
+   find_solib_trampoline_target relies on the presence of the jump
+   table relocation entry, so we have to detect these jump instructions
+   by hand.  */
+
+CORE_ADDR
+sunos4_skip_trampoline_code (pc)
+     CORE_ADDR pc;
+{
+  unsigned long insn1;
+  char buf[4];
+  int err;
+
+  err = target_read_memory (pc, buf, 4);
+  insn1 = extract_unsigned_integer (buf, 4);
+  if (err == 0 && (insn1 & 0xffc00000) == 0x03000000)
+    {
+      unsigned long insn2;
+
+      err = target_read_memory (pc + 4, buf, 4);
+      insn2 = extract_unsigned_integer (buf, 4);
+      if (err == 0 && (insn2 & 0xffffe000) == 0x81c06000)
+	{
+	  CORE_ADDR target_pc = (insn1 & 0x3fffff) << 10;
+	  int delta = insn2 & 0x1fff;
+
+	  /* Sign extend the displacement.  */
+	  if (delta & 0x1000)
+	    delta |= ~0x1fff;
+	  return target_pc + delta;
+	}
+    }
+  return find_solib_trampoline_target (pc);
+}
+
+#ifdef USE_PROC_FS	/* Target dependent support for /proc */
+
+/*  The /proc interface divides the target machine's register set up into
+    two different sets, the general register set (gregset) and the floating
+    point register set (fpregset).  For each set, there is an ioctl to get
+    the current register set and another ioctl to set the current values.
+
+    The actual structure passed through the ioctl interface is, of course,
+    naturally machine dependent, and is different for each set of registers.
+    For the sparc for example, the general register set is typically defined
+    by:
+
+	typedef int gregset_t[38];
+
+	#define	R_G0	0
+	...
+	#define	R_TBR	37
+
+    and the floating point set by:
+
+	typedef struct prfpregset {
+		union { 
+			u_long  pr_regs[32]; 
+			double  pr_dregs[16];
+		} pr_fr;
+		void *  pr_filler;
+		u_long  pr_fsr;
+		u_char  pr_qcnt;
+		u_char  pr_q_entrysize;
+		u_char  pr_en;
+		u_long  pr_q[64];
+	} prfpregset_t;
+
+    These routines provide the packing and unpacking of gregset_t and
+    fpregset_t formatted data.
+
+ */
+
+/* Given a pointer to a general register set in /proc format (gregset_t *),
+   unpack the register contents and supply them as gdb's idea of the current
+   register values. */
+
+void
+supply_gregset (gregsetp)
+prgregset_t *gregsetp;
+{
+  register int regi;
+  register prgreg_t *regp = (prgreg_t *) gregsetp;
+  static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0};
+
+  /* GDB register numbers for Gn, On, Ln, In all match /proc reg numbers.  */
+  for (regi = G0_REGNUM ; regi <= I7_REGNUM ; regi++)
+    {
+      supply_register (regi, (char *) (regp + regi));
+    }
+
+  /* These require a bit more care.  */
+  supply_register (PS_REGNUM, (char *) (regp + R_PS));
+  supply_register (PC_REGNUM, (char *) (regp + R_PC));
+  supply_register (NPC_REGNUM,(char *) (regp + R_nPC));
+  supply_register (Y_REGNUM,  (char *) (regp + R_Y));
+
+  /* Fill inaccessible registers with zero.  */
+  supply_register (WIM_REGNUM, zerobuf);
+  supply_register (TBR_REGNUM, zerobuf);
+  supply_register (CPS_REGNUM, zerobuf);
+}
+
+void
+fill_gregset (gregsetp, regno)
+prgregset_t *gregsetp;
+int regno;
+{
+  int regi;
+  register prgreg_t *regp = (prgreg_t *) gregsetp;
+
+  for (regi = 0 ; regi <= R_I7 ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  *(regp + regi) = *(int *) &registers[REGISTER_BYTE (regi)];
+	}
+    }
+  if ((regno == -1) || (regno == PS_REGNUM))
+    {
+      *(regp + R_PS) = *(int *) &registers[REGISTER_BYTE (PS_REGNUM)];
+    }
+  if ((regno == -1) || (regno == PC_REGNUM))
+    {
+      *(regp + R_PC) = *(int *) &registers[REGISTER_BYTE (PC_REGNUM)];
+    }
+  if ((regno == -1) || (regno == NPC_REGNUM))
+    {
+      *(regp + R_nPC) = *(int *) &registers[REGISTER_BYTE (NPC_REGNUM)];
+    }
+  if ((regno == -1) || (regno == Y_REGNUM))
+    {
+      *(regp + R_Y) = *(int *) &registers[REGISTER_BYTE (Y_REGNUM)];
+    }
+}
+
+#if defined (FP0_REGNUM)
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), unpack the register contents and supply them as gdb's
+    idea of the current floating point register values. */
+
+void 
+supply_fpregset (fpregsetp)
+prfpregset_t *fpregsetp;
+{
+  register int regi;
+  char *from;
+  
+  for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
+    {
+      from = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
+      supply_register (regi, from);
+    }
+  supply_register (FPS_REGNUM, (char *) &(fpregsetp->pr_fsr));
+}
+
+/*  Given a pointer to a floating point register set in /proc format
+    (fpregset_t *), update the register specified by REGNO from gdb's idea
+    of the current floating point register set.  If REGNO is -1, update
+    them all. */
+/* ??? This will probably need some changes for sparc64.  */
+
+void
+fill_fpregset (fpregsetp, regno)
+prfpregset_t *fpregsetp;
+int regno;
+{
+  int regi;
+  char *to;
+  char *from;
+
+  for (regi = FP0_REGNUM ; regi < FP_MAX_REGNUM ; regi++)
+    {
+      if ((regno == -1) || (regno == regi))
+	{
+	  from = (char *) &registers[REGISTER_BYTE (regi)];
+	  to = (char *) &fpregsetp->pr_fr.pr_regs[regi-FP0_REGNUM];
+	  memcpy (to, from, REGISTER_RAW_SIZE (regi));
+	}
+    }
+  if ((regno == -1) || (regno == FPS_REGNUM))
+    {
+      fpregsetp->pr_fsr = *(int *) &registers[REGISTER_BYTE (FPS_REGNUM)];
+    }
+}
+
+#endif	/* defined (FP0_REGNUM) */
+
+#endif  /* USE_PROC_FS */
+
+
+#ifdef GET_LONGJMP_TARGET
+
+/* Figure out where the longjmp will land.  We expect that we have just entered
+   longjmp and haven't yet setup the stack frame, so the args are still in the
+   output regs.  %o0 (O0_REGNUM) points at the jmp_buf structure from which we
+   extract the pc (JB_PC) that we will land at.  The pc is copied into ADDR.
+   This routine returns true on success */
+
+int
+get_longjmp_target (pc)
+     CORE_ADDR *pc;
+{
+  CORE_ADDR jb_addr;
+#define LONGJMP_TARGET_SIZE 4
+  char buf[LONGJMP_TARGET_SIZE];
+
+  jb_addr = read_register (O0_REGNUM);
+
+  if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
+			  LONGJMP_TARGET_SIZE))
+    return 0;
+
+  *pc = extract_address (buf, LONGJMP_TARGET_SIZE);
+
+  return 1;
+}
+#endif /* GET_LONGJMP_TARGET */
+
+#ifdef STATIC_TRANSFORM_NAME
+/* SunPRO (3.0 at least), encodes the static variables.  This is not
+   related to C++ mangling, it is done for C too.  */
+
+char *
+sunpro_static_transform_name (name)
+     char *name;
+{
+  char *p;
+  if (name[0] == '$')
+    {
+      /* For file-local statics there will be a dollar sign, a bunch
+	 of junk (the contents of which match a string given in the
+	 N_OPT), a period and the name.  For function-local statics
+	 there will be a bunch of junk (which seems to change the
+	 second character from 'A' to 'B'), a period, the name of the
+	 function, and the name.  So just skip everything before the
+	 last period.  */
+      p = strrchr (name, '.');
+      if (p != NULL)
+	name = p + 1;
+    }
+  return name;
+}
+#endif /* STATIC_TRANSFORM_NAME */
+
+
+/* Utilities for printing registers.
+   Page numbers refer to the SPARC Architecture Manual.  */
+
+static void dump_ccreg PARAMS ((char *, int));
+
+static void
+dump_ccreg (reg, val)
+     char *reg;
+     int val;
+{
+  /* page 41 */
+  printf_unfiltered ("%s:%s,%s,%s,%s", reg,
+	  val & 8 ? "N" : "NN",
+	  val & 4 ? "Z" : "NZ",
+	  val & 2 ? "O" : "NO",
+	  val & 1 ? "C" : "NC"
+  );
+}
+
+static char *
+decode_asi (val)
+     int val;
+{
+  /* page 72 */
+  switch (val)
+    {
+    case 4 : return "ASI_NUCLEUS";
+    case 0x0c : return "ASI_NUCLEUS_LITTLE";
+    case 0x10 : return "ASI_AS_IF_USER_PRIMARY";
+    case 0x11 : return "ASI_AS_IF_USER_SECONDARY";
+    case 0x18 : return "ASI_AS_IF_USER_PRIMARY_LITTLE";
+    case 0x19 : return "ASI_AS_IF_USER_SECONDARY_LITTLE";
+    case 0x80 : return "ASI_PRIMARY";
+    case 0x81 : return "ASI_SECONDARY";
+    case 0x82 : return "ASI_PRIMARY_NOFAULT";
+    case 0x83 : return "ASI_SECONDARY_NOFAULT";
+    case 0x88 : return "ASI_PRIMARY_LITTLE";
+    case 0x89 : return "ASI_SECONDARY_LITTLE";
+    case 0x8a : return "ASI_PRIMARY_NOFAULT_LITTLE";
+    case 0x8b : return "ASI_SECONDARY_NOFAULT_LITTLE";
+    default : return NULL;
+    }
+}
+
+/* PRINT_REGISTER_HOOK routine.
+   Pretty print various registers.  */
+/* FIXME: Would be nice if this did some fancy things for 32 bit sparc.  */
+
+void
+sparc_print_register_hook (regno)
+     int regno;
+{
+  ULONGEST val;
+
+  /* Handle double/quad versions of lower 32 fp regs.  */
+  if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32
+      && (regno & 1) == 0)
+    {
+      char value[16];
+
+      if (!read_relative_register_raw_bytes (regno, value)
+	  && !read_relative_register_raw_bytes (regno + 1, value + 4))
+	{
+	  printf_unfiltered ("\t");
+	  print_floating (value, builtin_type_double, gdb_stdout);
+	}
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+      if ((regno & 3) == 0)
+	{
+	  if (!read_relative_register_raw_bytes (regno + 2, value + 8)
+	      && !read_relative_register_raw_bytes (regno + 3, value + 12))
+	    {
+	      printf_unfiltered ("\t");
+	      print_floating (value, builtin_type_long_double, gdb_stdout);
+	    }
+	}
+#endif
+      return;
+    }
+
+#if 0 /* FIXME: gdb doesn't handle long doubles */
+  /* Print upper fp regs as long double if appropriate.  */
+  if (regno >= FP0_REGNUM + 32 && regno < FP_MAX_REGNUM
+      /* We test for even numbered regs and not a multiple of 4 because
+	 the upper fp regs are recorded as doubles.  */
+      && (regno & 1) == 0)
+    {
+      char value[16];
+
+      if (!read_relative_register_raw_bytes (regno, value)
+	  && !read_relative_register_raw_bytes (regno + 1, value + 8))
+	{
+	  printf_unfiltered ("\t");
+	  print_floating (value, builtin_type_long_double, gdb_stdout);
+	}
+      return;
+    }
+#endif
+
+  /* FIXME: Some of these are priviledged registers.
+     Not sure how they should be handled.  */
+
+#define BITS(n, mask) ((int) (((val) >> (n)) & (mask)))
+
+  val = read_register (regno);
+
+  /* pages 40 - 60 */
+  switch (regno)
+    {
+#ifdef GDB_TARGET_IS_SPARC64
+    case CCR_REGNUM :
+      printf_unfiltered("\t");
+      dump_ccreg ("xcc", val >> 4);
+      printf_unfiltered(", ");
+      dump_ccreg ("icc", val & 15);
+      break;
+    case FPRS_REGNUM :
+      printf ("\tfef:%d, du:%d, dl:%d",
+	      BITS (2, 1), BITS (1, 1), BITS (0, 1));
+      break;
+    case FSR_REGNUM :
+      {
+	static char *fcc[4] = { "=", "<", ">", "?" };
+	static char *rd[4] = { "N", "0", "+", "-" };
+	/* Long, yes, but I'd rather leave it as is and use a wide screen.  */
+	printf ("\t0:%s, 1:%s, 2:%s, 3:%s, rd:%s, tem:%d, ns:%d, ver:%d, ftt:%d, qne:%d, aexc:%d, cexc:%d",
+		fcc[BITS (10, 3)], fcc[BITS (32, 3)],
+		fcc[BITS (34, 3)], fcc[BITS (36, 3)],
+		rd[BITS (30, 3)], BITS (23, 31), BITS (22, 1), BITS (17, 7),
+		BITS (14, 7), BITS (13, 1), BITS (5, 31), BITS (0, 31));
+	break;
+      }
+    case ASI_REGNUM :
+      {
+	char *asi = decode_asi (val);
+	if (asi != NULL)
+	  printf ("\t%s", asi);
+	break;
+      }
+    case VER_REGNUM :
+      printf ("\tmanuf:%d, impl:%d, mask:%d, maxtl:%d, maxwin:%d",
+	      BITS (48, 0xffff), BITS (32, 0xffff),
+	      BITS (24, 0xff), BITS (8, 0xff), BITS (0, 31));
+      break;
+    case PSTATE_REGNUM :
+      {
+	static char *mm[4] = { "tso", "pso", "rso", "?" };
+	printf ("\tcle:%d, tle:%d, mm:%s, red:%d, pef:%d, am:%d, priv:%d, ie:%d, ag:%d",
+		BITS (9, 1), BITS (8, 1), mm[BITS (6, 3)], BITS (5, 1),
+		BITS (4, 1), BITS (3, 1), BITS (2, 1), BITS (1, 1),
+		BITS (0, 1));
+	break;
+      }
+    case TSTATE_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TT_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TPC_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case TNPC_REGNUM :
+      /* FIXME: print all 4? */
+      break;
+    case WSTATE_REGNUM :
+      printf ("\tother:%d, normal:%d", BITS (3, 7), BITS (0, 7));
+      break;
+    case CWP_REGNUM :
+      printf ("\t%d", BITS (0, 31));
+      break;
+    case CANSAVE_REGNUM :
+      printf ("\t%-2d before spill", BITS (0, 31));
+      break;
+    case CANRESTORE_REGNUM :
+      printf ("\t%-2d before fill", BITS (0, 31));
+      break;
+    case CLEANWIN_REGNUM :
+      printf ("\t%-2d before clean", BITS (0, 31));
+      break;
+    case OTHERWIN_REGNUM :
+      printf ("\t%d", BITS (0, 31));
+      break;
+#else
+    case PS_REGNUM:
+      printf ("\ticc:%c%c%c%c, pil:%d, s:%d, ps:%d, et:%d, cwp:%d",
+	      BITS (23, 1) ? 'N' : '-', BITS (22, 1) ? 'Z' : '-',
+	      BITS (21, 1) ? 'V' : '-', BITS (20, 1) ? 'C' : '-',
+	      BITS (8, 15), BITS (7, 1), BITS (6, 1), BITS (5, 1),
+	      BITS (0, 31));
+      break;
+    case FPS_REGNUM:
+      {
+	static char *fcc[4] = { "=", "<", ">", "?" };
+	static char *rd[4] = { "N", "0", "+", "-" };
+	/* Long, yes, but I'd rather leave it as is and use a wide screen.  */
+	printf ("\trd:%s, tem:%d, ns:%d, ver:%d, ftt:%d, qne:%d, "
+		"fcc:%s, aexc:%d, cexc:%d",
+		rd[BITS (30, 3)], BITS (23, 31), BITS (22, 1), BITS (17, 7),
+		BITS (14, 7), BITS (13, 1), fcc[BITS (10, 3)], BITS (5, 31),
+		BITS (0, 31));
+	break;
+      }
+
+#endif	/* GDB_TARGET_IS_SPARC64 */
+    }
+
+#undef BITS
+}
+
+int
+gdb_print_insn_sparc (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  /* It's necessary to override mach again because print_insn messes it up. */
+  info->mach = TM_PRINT_INSN_MACH;
+  return print_insn_sparc (memaddr, info);
+}
+
+/* The SPARC passes the arguments on the stack; arguments smaller
+   than an int are promoted to an int.  */
+
+CORE_ADDR
+sparc_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     int struct_return;
+     CORE_ADDR struct_addr;
+{
+  int i;
+  int accumulate_size = 0;
+  struct sparc_arg
+    {
+      char *contents;
+      int len;
+      int offset;
+    };
+  struct sparc_arg *sparc_args =
+      (struct sparc_arg*)alloca (nargs * sizeof (struct sparc_arg));
+  struct sparc_arg *m_arg;
+
+  /* Promote arguments if necessary, and calculate their stack offsets
+     and sizes. */
+  for (i = 0, m_arg = sparc_args; i < nargs; i++, m_arg++)
+    {
+      value_ptr arg = args[i];
+      struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+      /* Cast argument to long if necessary as the compiler does it too.  */
+      switch (TYPE_CODE (arg_type))
+	{
+	case TYPE_CODE_INT:
+	case TYPE_CODE_BOOL:
+	case TYPE_CODE_CHAR:
+	case TYPE_CODE_RANGE:
+	case TYPE_CODE_ENUM:
+	  if (TYPE_LENGTH (arg_type) < TYPE_LENGTH (builtin_type_long))
+	    {
+	      arg_type = builtin_type_long;
+	      arg = value_cast (arg_type, arg);
+	    }
+	  break;
+	default:
+	  break;
+	}
+      m_arg->len = TYPE_LENGTH (arg_type);
+      m_arg->offset = accumulate_size;
+      accumulate_size = (accumulate_size + m_arg->len + 3) & ~3;
+      m_arg->contents = VALUE_CONTENTS(arg);
+    }
+
+  /* Make room for the arguments on the stack.  */
+  accumulate_size += CALL_DUMMY_STACK_ADJUST;
+  sp = ((sp - accumulate_size) & ~7) + CALL_DUMMY_STACK_ADJUST;
+
+  /* `Push' arguments on the stack.  */
+  for (i = nargs; m_arg--, --i >= 0; )
+    write_memory(sp + m_arg->offset, m_arg->contents, m_arg->len);
+
+  return sp;
+}
+
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+void
+sparc_extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+{
+  int typelen = TYPE_LENGTH (type);
+  int regsize = REGISTER_RAW_SIZE (O0_REGNUM);
+
+  if (TYPE_CODE (type) == TYPE_CODE_FLT && SPARC_HAS_FPU)
+    memcpy (valbuf, &regbuf [REGISTER_BYTE (FP0_REGNUM)], typelen);
+  else
+    memcpy (valbuf,
+	    &regbuf [O0_REGNUM * regsize +
+		     (typelen >= regsize
+		      || TARGET_BYTE_ORDER == LITTLE_ENDIAN ? 0
+			 : regsize - typelen)],
+	    typelen);
+}
+
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  On SPARCs with FPUs,
+   float values are returned in %f0 (and %f1).  In all other cases,
+   values are returned in register %o0.  */
+
+void
+sparc_store_return_value (type, valbuf)
+     struct type *type;
+     char *valbuf;
+{
+  int regno;
+  char buffer[MAX_REGISTER_RAW_SIZE];
+
+  if (TYPE_CODE (type) == TYPE_CODE_FLT && SPARC_HAS_FPU)
+    /* Floating-point values are returned in the register pair */
+    /* formed by %f0 and %f1 (doubles are, anyway).  */
+    regno = FP0_REGNUM;
+  else
+    /* Other values are returned in register %o0.  */
+    regno = O0_REGNUM;
+
+  /* Add leading zeros to the value. */
+  if (TYPE_LENGTH (type) < REGISTER_RAW_SIZE(regno))
+    {
+      bzero (buffer, REGISTER_RAW_SIZE(regno));
+      memcpy (buffer + REGISTER_RAW_SIZE(regno) - TYPE_LENGTH (type), valbuf,
+	      TYPE_LENGTH (type));
+      write_register_bytes (REGISTER_BYTE (regno), buffer, 
+			    REGISTER_RAW_SIZE(regno));
+    }
+  else
+    write_register_bytes (REGISTER_BYTE (regno), valbuf, TYPE_LENGTH (type));
+}
+
+
+/* Insert the function address into a call dummy instruction sequence
+   stored at DUMMY.
+
+   For structs and unions, if the function was compiled with Sun cc,
+   it expects 'unimp' after the call.  But gcc doesn't use that
+   (twisted) convention.  So leave a nop there for gcc (FIX_CALL_DUMMY
+   can assume it is operating on a pristine CALL_DUMMY, not one that
+   has already been customized for a different function).  */
+
+void
+sparc_fix_call_dummy (dummy, pc, fun, value_type, using_gcc)
+     char *dummy;
+     CORE_ADDR pc;
+     CORE_ADDR fun;
+     struct type *value_type;
+     int using_gcc;
+{
+  int i;
+
+  /* Store the relative adddress of the target function into the
+     'call' instruction. */
+  store_unsigned_integer (dummy + CALL_DUMMY_CALL_OFFSET, 4,
+			  (0x40000000
+			   | (((fun - (pc + CALL_DUMMY_CALL_OFFSET)) >> 2)
+			       & 0x3fffffff)));
+
+  /* Comply with strange Sun cc calling convention for struct-returning
+     functions.  */
+  if (!using_gcc
+      && (TYPE_CODE (value_type) == TYPE_CODE_STRUCT
+	  || TYPE_CODE (value_type) == TYPE_CODE_UNION))
+    store_unsigned_integer (dummy + CALL_DUMMY_CALL_OFFSET + 8, 4,
+			    TYPE_LENGTH (value_type) & 0x1fff);
+
+#ifndef GDB_TARGET_IS_SPARC64
+  /* If this is not a simulator target, change the first four instructions
+     of the call dummy to NOPs.  Those instructions include a 'save'
+     instruction and are designed to work around problems with register
+     window flushing in the simulator. */
+  if (strcmp (target_shortname, "sim") != 0)
+    {
+      for (i = 0; i < 4; i++)
+	store_unsigned_integer (dummy + (i * 4), 4, 0x01000000);
+    }
+#endif
+
+  /* If this is a bi-endian target, GDB has written the call dummy
+     in little-endian order.  We must byte-swap it back to big-endian. */
+  if (bi_endian)
+    {
+      for (i = 0; i < CALL_DUMMY_LENGTH; i += 4)
+	{
+	  char tmp = dummy [i];
+	  dummy [i] = dummy [i+3];
+	  dummy [i+3] = tmp;
+	  tmp = dummy [i+1];
+	  dummy [i+1] = dummy [i+2];
+	  dummy [i+2] = tmp;
+	}
+    }
+}
+
+
+/* Set target byte order based on machine type. */
+
+static int
+sparc_target_architecture_hook (ap)
+     const bfd_arch_info_type *ap;
+{
+  int i, j;
+
+  if (ap->mach == bfd_mach_sparc_sparclite_le)
+    {
+      if (TARGET_BYTE_ORDER_SELECTABLE_P)
+	{
+	  target_byte_order = LITTLE_ENDIAN;
+	  bi_endian = 1;
+	}
+      else
+	{
+	  warning ("This GDB does not support little endian sparclite.");
+	}
+    }
+  else
+    bi_endian = 0;
+  return 1;
+}
+
+
+void
+_initialize_sparc_tdep ()
+{
+  tm_print_insn = gdb_print_insn_sparc;
+  tm_print_insn_info.mach = TM_PRINT_INSN_MACH;  /* Selects sparc/sparclite */
+  target_architecture_hook = sparc_target_architecture_hook;
+}
+
+
+#ifdef GDB_TARGET_IS_SPARC64
+
+/* Compensate for stack bias. Note that we currently don't handle mixed
+   32/64 bit code. */
+CORE_ADDR
+sparc64_read_sp ()
+{
+  CORE_ADDR sp = read_register (SP_REGNUM);
+
+  if (sp & 1)
+    sp += 2047;
+  return sp;
+}
+
+CORE_ADDR
+sparc64_read_fp ()
+{
+  CORE_ADDR fp = read_register (FP_REGNUM);
+
+  if (fp & 1)
+    fp += 2047;
+  return fp;
+}
+
+void
+sparc64_write_sp (val)
+     CORE_ADDR val;
+{
+  CORE_ADDR oldsp = read_register (SP_REGNUM);
+  if (oldsp & 1)
+    write_register (SP_REGNUM, val - 2047);
+  else
+    write_register (SP_REGNUM, val);
+}
+
+void
+sparc64_write_fp (val)
+     CORE_ADDR val;
+{
+  CORE_ADDR oldfp = read_register (FP_REGNUM);
+  if (oldfp & 1)
+    write_register (FP_REGNUM, val - 2047);
+  else
+    write_register (FP_REGNUM, val);
+}
+
+/* The SPARC 64 ABI passes floating-point arguments in FP0-31. They are
+   also copied onto the stack in the correct places. */
+
+CORE_ADDR
+sp64_push_arguments (nargs, args, sp, struct_return, struct_retaddr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_retaddr;
+{
+  int x;
+  int regnum = 0;
+  CORE_ADDR tempsp;
+  
+  sp = (sp & ~(((unsigned long)TYPE_LENGTH (builtin_type_long)) - 1UL));
+
+  /* Figure out how much space we'll need. */
+  for (x = nargs - 1; x >= 0; x--)
+    {
+      int len = TYPE_LENGTH (check_typedef (VALUE_TYPE (args[x])));
+      value_ptr copyarg = args[x];
+      int copylen = len;
+
+      /* This code is, of course, no longer correct. */
+      if (copylen < TYPE_LENGTH (builtin_type_long))
+	{
+	  copyarg = value_cast(builtin_type_long, copyarg);
+          copylen = TYPE_LENGTH (builtin_type_long);
+        }
+      sp -= copylen;
+    }
+
+  /* Round down. */
+  sp = sp & ~7;
+  tempsp = sp;
+
+  /* Now write the arguments onto the stack, while writing FP arguments
+     into the FP registers. */
+  for (x = 0; x < nargs; x++)
+    {
+      int len = TYPE_LENGTH (check_typedef (VALUE_TYPE (args[x])));
+      value_ptr copyarg = args[x];
+      int copylen = len;
+
+      /* This code is, of course, no longer correct. */
+      if (copylen < TYPE_LENGTH (builtin_type_long))
+	{
+	  copyarg = value_cast(builtin_type_long, copyarg);
+          copylen = TYPE_LENGTH (builtin_type_long);
+        }
+      write_memory (tempsp, VALUE_CONTENTS (copyarg), copylen);
+      tempsp += copylen;
+      if (TYPE_CODE (VALUE_TYPE (args[x])) == TYPE_CODE_FLT && regnum < 32)
+	{
+	  /* This gets copied into a FP register. */
+	  int nextreg = regnum + 2;
+	  char *data = VALUE_CONTENTS (args[x]);
+	  /* Floats go into the lower half of a FP register pair; quads
+	     use 2 pairs. */
+
+	  if (len == 16)
+	    nextreg += 2;
+	  else if (len == 4)
+	    regnum++;
+
+	  write_register_bytes (REGISTER_BYTE (FP0_REGNUM + regnum),
+				data,
+				len);
+	  regnum = nextreg;
+	}
+    }
+  return sp;
+}
+
+/* Values <= 32 bytes are returned in o0-o3 (floating-point values are
+   returned in f0-f3). */
+void
+sparc64_extract_return_value (type, regbuf, valbuf, bitoffset)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+     int bitoffset;
+{
+  int typelen = TYPE_LENGTH (type);
+  int regsize = REGISTER_RAW_SIZE (O0_REGNUM);
+
+  if (TYPE_CODE (type) == TYPE_CODE_FLT && SPARC_HAS_FPU)
+    {
+      memcpy (valbuf, &regbuf [REGISTER_BYTE (FP0_REGNUM)], typelen);
+      return;
+    }
+
+  if (TYPE_CODE (type) != TYPE_CODE_STRUCT
+      || (TYPE_LENGTH (type) > 32))
+    {
+      memcpy (valbuf,
+	      &regbuf [O0_REGNUM * regsize +
+		      (typelen >= regsize ? 0 : regsize - typelen)],
+	      typelen);
+      return;
+    }
+  else
+    {
+      char *o0 = &regbuf[O0_REGNUM * regsize];
+      char *f0 = &regbuf[FP0_REGNUM * regsize];
+      int x;
+
+      for (x = 0; x < TYPE_NFIELDS (type); x++)
+	{
+	  struct field *f = &TYPE_FIELDS(type)[x];
+	  /* FIXME: We may need to handle static fields here. */
+	  int whichreg = (f->loc.bitpos + bitoffset) / 32;
+	  int remainder = ((f->loc.bitpos + bitoffset) % 32) / 8;
+	  int where = (f->loc.bitpos + bitoffset) / 8;
+	  int size = TYPE_LENGTH (f->type);
+	  int typecode = TYPE_CODE (f->type);
+
+	  if (typecode == TYPE_CODE_STRUCT)
+	    {
+	      sparc64_extract_return_value (f->type,
+					    regbuf,
+					    valbuf,
+					    bitoffset + f->loc.bitpos);
+	    }
+	  else if (typecode == TYPE_CODE_FLT)
+	    {
+	      memcpy (valbuf + where, &f0[whichreg * 4] + remainder, size);
+	    }
+	  else
+	    {
+	      memcpy (valbuf + where, &o0[whichreg * 4] + remainder, size);
+	    }
+	}
+    }
+}
+#endif
diff --git a/gdb/sparcl-stub.c b/gdb/sparcl-stub.c
new file mode 100644
index 0000000..c7994fe
--- /dev/null
+++ b/gdb/sparcl-stub.c
@@ -0,0 +1,1024 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for SPARC by Stu Grossman, Cygnus Support.
+ *  Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware
+ *  breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support.
+ *
+ *  This code has been extensively tested on the Fujitsu SPARClite demo board.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <string.h>
+#include <signal.h>
+#include <sparclite.h>
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+
+extern void putDebugChar (int c); /* write a single character      */
+extern int getDebugChar (void);	/* read and return a single char */
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 2048
+
+static int initialized = 0;	/* !0 means we've been initialized */
+
+extern void breakinst ();
+static void set_mem_fault_trap (int enable);
+static void get_in_break_mode (void);
+
+static const char hexchars[]="0123456789abcdef";
+
+#define NUMREGS 80 
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES (NUMREGS * 4)
+enum regnames {G0, G1, G2, G3, G4, G5, G6, G7,
+		 O0, O1, O2, O3, O4, O5, SP, O7,
+		 L0, L1, L2, L3, L4, L5, L6, L7,
+		 I0, I1, I2, I3, I4, I5, FP, I7,
+
+		 F0, F1, F2, F3, F4, F5, F6, F7,
+		 F8, F9, F10, F11, F12, F13, F14, F15,
+		 F16, F17, F18, F19, F20, F21, F22, F23,
+		 F24, F25, F26, F27, F28, F29, F30, F31,
+		 Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR,
+		 DIA1, DIA2, DDA1, DDA2, DDV1, DDV2, DCR, DSR };
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+extern void trap_low();
+
+/* Create private copies of common functions used by the stub.  This prevents
+   nasty interactions between app code and the stub (for instance if user steps
+   into strlen, etc..) */
+
+static int
+strlen (const char *s)
+{
+  const char *s1 = s;
+
+  while (*s1++ != '\000');
+
+  return s1 - s;
+}
+
+static char *
+strcpy (char *dst, const char *src)
+{
+  char *retval = dst;
+
+  while ((*dst++ = *src++) != '\000');
+
+  return retval;
+}
+
+static void *
+memcpy (void *vdst, const void *vsrc, int n)
+{
+  char *dst = vdst;
+  const char *src = vsrc;
+  char *retval = dst;
+
+  while (n-- > 0)
+    *dst++ = *src++;
+
+  return retval;
+}
+
+asm("
+	.reserve trapstack, 1000 * 4, \"bss\", 8
+
+	.data
+	.align	4
+
+in_trap_handler:
+	.word	0
+
+	.text
+	.align 4
+
+! This function is called when any SPARC trap (except window overflow or
+! underflow) occurs.  It makes sure that the invalid register window is still
+! available before jumping into C code.  It will also restore the world if you
+! return from handle_exception.
+!
+! On entry, trap_low expects l1 and l2 to contain pc and npc respectivly.
+! Register usage throughout the routine is as follows:
+!
+!	l0 - psr
+!	l1 - pc
+!	l2 - npc
+!	l3 - wim
+!	l4 - scratch and y reg
+!	l5 - scratch and tbr
+!	l6 - unused
+!	l7 - unused
+
+	.globl _trap_low
+_trap_low:
+	mov	%psr, %l0
+	mov	%wim, %l3
+
+	srl	%l3, %l0, %l4		! wim >> cwp
+	cmp	%l4, 1
+	bne	window_fine		! Branch if not in the invalid window
+	nop
+
+! Handle window overflow
+
+	mov	%g1, %l4		! Save g1, we use it to hold the wim
+	srl	%l3, 1, %g1		! Rotate wim right
+	tst	%g1
+	bg	good_wim		! Branch if new wim is non-zero
+	nop
+
+! At this point, we need to bring a 1 into the high order bit of the wim.
+! Since we don't want to make any assumptions about the number of register
+! windows, we figure it out dynamically so as to setup the wim correctly.
+
+	not	%g1			! Fill g1 with ones
+	mov	%g1, %wim		! Fill the wim with ones
+	nop
+	nop
+	nop
+	mov	%wim, %g1		! Read back the wim
+	inc	%g1			! Now g1 has 1 just to left of wim
+	srl	%g1, 1, %g1		! Now put 1 at top of wim
+	mov	%g0, %wim		! Clear wim so that subsequent save
+	nop				!  won't trap
+	nop
+	nop
+
+good_wim:
+	save	%g0, %g0, %g0		! Slip into next window
+	mov	%g1, %wim		! Install the new wim
+
+	std	%l0, [%sp + 0 * 4]	! save L & I registers
+	std	%l2, [%sp + 2 * 4]
+	std	%l4, [%sp + 4 * 4]
+	std	%l6, [%sp + 6 * 4]
+
+	std	%i0, [%sp + 8 * 4]
+	std	%i2, [%sp + 10 * 4]
+	std	%i4, [%sp + 12 * 4]
+	std	%i6, [%sp + 14 * 4]
+
+	restore				! Go back to trap window.
+	mov	%l4, %g1		! Restore %g1
+
+window_fine:
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	tst	%l5
+	bg	recursive_trap
+	inc	%l5
+
+	set	trapstack+1000*4, %sp	! Switch to trap stack
+
+recursive_trap:
+	st	%l5, [%lo(in_trap_handler) + %l4]
+	sub	%sp,(16+1+6+1+80)*4,%sp	! Make room for input & locals
+ 					! + hidden arg + arg spill
+					! + doubleword alignment
+					! + registers[72] local var
+
+	std	%g0, [%sp + (24 + 0) * 4] ! registers[Gx]
+	std	%g2, [%sp + (24 + 2) * 4]
+	std	%g4, [%sp + (24 + 4) * 4]
+	std	%g6, [%sp + (24 + 6) * 4]
+
+	std	%i0, [%sp + (24 + 8) * 4] ! registers[Ox]
+	std	%i2, [%sp + (24 + 10) * 4]
+	std	%i4, [%sp + (24 + 12) * 4]
+	std	%i6, [%sp + (24 + 14) * 4]
+
+	mov	%y, %l4
+	mov	%tbr, %l5
+	st	%l4, [%sp + (24 + 64) * 4] ! Y
+	st	%l0, [%sp + (24 + 65) * 4] ! PSR
+	st	%l3, [%sp + (24 + 66) * 4] ! WIM
+	st	%l5, [%sp + (24 + 67) * 4] ! TBR
+	st	%l1, [%sp + (24 + 68) * 4] ! PC
+	st	%l2, [%sp + (24 + 69) * 4] ! NPC
+
+	or	%l0, 0xf20, %l4
+	mov	%l4, %psr		! Turn on traps, disable interrupts
+
+	set	0x1000, %l1
+	btst	%l1, %l0		! FP enabled?
+	be	no_fpstore
+	nop
+
+! Must save fsr first, to flush the FQ.  This may cause a deferred fp trap, so
+! traps must be enabled to allow the trap handler to clean things up.
+
+	st	%fsr, [%sp + (24 + 70) * 4]
+
+	std	%f0, [%sp + (24 + 32) * 4]
+	std	%f2, [%sp + (24 + 34) * 4]
+	std	%f4, [%sp + (24 + 36) * 4]
+	std	%f6, [%sp + (24 + 38) * 4]
+	std	%f8, [%sp + (24 + 40) * 4]
+	std	%f10, [%sp + (24 + 42) * 4]
+	std	%f12, [%sp + (24 + 44) * 4]
+	std	%f14, [%sp + (24 + 46) * 4]
+	std	%f16, [%sp + (24 + 48) * 4]
+	std	%f18, [%sp + (24 + 50) * 4]
+	std	%f20, [%sp + (24 + 52) * 4]
+	std	%f22, [%sp + (24 + 54) * 4]
+	std	%f24, [%sp + (24 + 56) * 4]
+	std	%f26, [%sp + (24 + 58) * 4]
+	std	%f28, [%sp + (24 + 60) * 4]
+	std	%f30, [%sp + (24 + 62) * 4]
+no_fpstore:
+
+	call	_handle_exception
+	add	%sp, 24 * 4, %o0	! Pass address of registers
+
+! Reload all of the registers that aren't on the stack
+
+	ld	[%sp + (24 + 1) * 4], %g1 ! registers[Gx]
+	ldd	[%sp + (24 + 2) * 4], %g2
+	ldd	[%sp + (24 + 4) * 4], %g4
+	ldd	[%sp + (24 + 6) * 4], %g6
+
+	ldd	[%sp + (24 + 8) * 4], %i0 ! registers[Ox]
+	ldd	[%sp + (24 + 10) * 4], %i2
+	ldd	[%sp + (24 + 12) * 4], %i4
+	ldd	[%sp + (24 + 14) * 4], %i6
+
+
+	ldd	[%sp + (24 + 64) * 4], %l0 ! Y & PSR
+	ldd	[%sp + (24 + 68) * 4], %l2 ! PC & NPC
+
+	set	0x1000, %l5
+	btst	%l5, %l1		! FP enabled?
+	be	no_fpreload
+	nop
+
+	ldd	[%sp + (24 + 32) * 4], %f0
+	ldd	[%sp + (24 + 34) * 4], %f2
+	ldd	[%sp + (24 + 36) * 4], %f4
+	ldd	[%sp + (24 + 38) * 4], %f6
+	ldd	[%sp + (24 + 40) * 4], %f8
+	ldd	[%sp + (24 + 42) * 4], %f10
+	ldd	[%sp + (24 + 44) * 4], %f12
+	ldd	[%sp + (24 + 46) * 4], %f14
+	ldd	[%sp + (24 + 48) * 4], %f16
+	ldd	[%sp + (24 + 50) * 4], %f18
+	ldd	[%sp + (24 + 52) * 4], %f20
+	ldd	[%sp + (24 + 54) * 4], %f22
+	ldd	[%sp + (24 + 56) * 4], %f24
+	ldd	[%sp + (24 + 58) * 4], %f26
+	ldd	[%sp + (24 + 60) * 4], %f28
+	ldd	[%sp + (24 + 62) * 4], %f30
+
+	ld	[%sp + (24 + 70) * 4], %fsr
+no_fpreload:
+
+	restore				! Ensure that previous window is valid
+	save	%g0, %g0, %g0		!  by causing a window_underflow trap
+
+	mov	%l0, %y
+	mov	%l1, %psr		! Make sure that traps are disabled
+					! for rett
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	dec	%l5
+	st	%l5, [%lo(in_trap_handler) + %l4]
+
+	jmpl	%l2, %g0		! Restore old PC
+	rett	%l3			! Restore old nPC
+");
+
+/* Convert ch from a hex digit to an int */
+
+static int
+hex(ch)
+     unsigned char ch;
+{
+  if (ch >= 'a' && ch <= 'f')
+    return ch-'a'+10;
+  if (ch >= '0' && ch <= '9')
+    return ch-'0';
+  if (ch >= 'A' && ch <= 'F')
+    return ch-'A'+10;
+  return -1;
+}
+
+/* scan for the sequence $<data>#<checksum>     */
+
+static void
+getpacket(buffer)
+     char *buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int i;
+  int count;
+  unsigned char ch;
+
+  do
+    {
+      /* wait around for the start character, ignore all other characters */
+      while ((ch = (getDebugChar() & 0x7f)) != '$') ;
+
+      checksum = 0;
+      xmitcsum = -1;
+
+      count = 0;
+
+      /* now, read until a # or end of buffer is found */
+      while (count < BUFMAX)
+	{
+	  ch = getDebugChar() & 0x7f;
+	  if (ch == '#')
+	    break;
+	  checksum = checksum + ch;
+	  buffer[count] = ch;
+	  count = count + 1;
+	}
+
+      if (count >= BUFMAX)
+	continue;
+
+      buffer[count] = 0;
+
+      if (ch == '#')
+	{
+	  xmitcsum = hex(getDebugChar() & 0x7f) << 4;
+	  xmitcsum |= hex(getDebugChar() & 0x7f);
+#if 0
+	  /* Humans shouldn't have to figure out checksums to type to it. */
+	  putDebugChar ('+');
+	  return;
+#endif
+	  if (checksum != xmitcsum)
+	    putDebugChar('-');	/* failed checksum */
+	  else
+	    {
+	      putDebugChar('+'); /* successful transfer */
+	      /* if a sequence char is present, reply the sequence ID */
+	      if (buffer[2] == ':')
+		{
+		  putDebugChar(buffer[0]);
+		  putDebugChar(buffer[1]);
+		  /* remove sequence chars from buffer */
+		  count = strlen(buffer);
+		  for (i=3; i <= count; i++)
+		    buffer[i-3] = buffer[i];
+		}
+	    }
+	}
+    }
+  while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer.  */
+
+static void
+putpacket(buffer)
+     unsigned char *buffer;
+{
+  unsigned char checksum;
+  int count;
+  unsigned char ch;
+
+  /*  $<packet info>#<checksum>. */
+  do
+    {
+      putDebugChar('$');
+      checksum = 0;
+      count = 0;
+
+      while (ch = buffer[count])
+	{
+	  putDebugChar (ch);
+	  checksum += ch;
+	  count += 1;
+	}
+
+      putDebugChar('#');
+      putDebugChar(hexchars[checksum >> 4]);
+      putDebugChar(hexchars[checksum & 0xf]);
+
+    }
+  while ((getDebugChar() & 0x7f) != '+');
+}
+
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+   error.  */
+static volatile int mem_err = 0;
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null), in case of mem fault,
+ * return 0.
+ * If MAY_FAULT is non-zero, then we will handle memory faults by returning
+ * a 0, else treat a fault like any other fault in the stub.
+ */
+
+static unsigned char *
+mem2hex(mem, buf, count, may_fault)
+     unsigned char *mem;
+     unsigned char *buf;
+     int count;
+     int may_fault;
+{
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  while (count-- > 0)
+    {
+      ch = *mem++;
+      if (mem_err)
+	return 0;
+      *buf++ = hexchars[ch >> 4];
+      *buf++ = hexchars[ch & 0xf];
+    }
+
+  *buf = 0;
+
+  set_mem_fault_trap(0);
+
+  return buf;
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written */
+
+static char *
+hex2mem(buf, mem, count, may_fault)
+     unsigned char *buf;
+     unsigned char *mem;
+     int count;
+     int may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  for (i=0; i<count; i++)
+    {
+      ch = hex(*buf++) << 4;
+      ch |= hex(*buf++);
+      *mem++ = ch;
+      if (mem_err)
+	return 0;
+    }
+
+  set_mem_fault_trap(0);
+
+  return mem;
+}
+
+/* This table contains the mapping between SPARC hardware trap types, and
+   signals, which are primarily what GDB understands.  It also indicates
+   which hardware traps we need to commandeer when initializing the stub. */
+
+static struct hard_trap_info
+{
+  unsigned char tt;		/* Trap type code for SPARClite */
+  unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+  {0x01, SIGSEGV},		/* instruction access error */
+  {0x02, SIGILL},		/* privileged instruction */
+  {0x03, SIGILL},		/* illegal instruction */
+  {0x04, SIGEMT},		/* fp disabled */
+  {0x07, SIGBUS},		/* mem address not aligned */
+  {0x09, SIGSEGV},		/* data access exception */
+  {0x0a, SIGEMT},		/* tag overflow */
+  {0x20, SIGBUS},		/* r register access error */
+  {0x21, SIGBUS},		/* instruction access error */
+  {0x24, SIGEMT},		/* cp disabled */
+  {0x29, SIGBUS},		/* data access error */
+  {0x2a, SIGFPE},		/* divide by zero */
+  {0x2b, SIGBUS},		/* data store error */
+  {0x80+1, SIGTRAP},		/* ta 1 - normal breakpoint instruction */
+  {0xff, SIGTRAP},		/* hardware breakpoint */
+  {0, 0}			/* Must be last */
+};
+
+/* Set up exception handlers for tracing and breakpoints */
+
+void
+set_debug_traps()
+{
+  struct hard_trap_info *ht;
+
+/* Only setup fp traps if the FP is disabled.  */
+
+  for (ht = hard_trap_info;
+       ht->tt != 0 && ht->signo != 0;
+       ht++)
+    if (ht->tt != 4 || ! (read_psr () & 0x1000))
+      exceptionHandler(ht->tt, trap_low);
+
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+
+  putDebugChar ('+');
+
+  initialized = 1;
+}
+
+asm ("
+! Trap handler for memory errors.  This just sets mem_err to be non-zero.  It
+! assumes that %l1 is non-zero.  This should be safe, as it is doubtful that
+! 0 would ever contain code that could mem fault.  This routine will skip
+! past the faulting instruction after setting mem_err.
+
+	.text
+	.align 4
+
+_fltr_set_mem_err:
+	sethi %hi(_mem_err), %l0
+	st %l1, [%l0 + %lo(_mem_err)]
+	jmpl %l2, %g0
+	rett %l2+4
+");
+
+static void
+set_mem_fault_trap(enable)
+     int enable;
+{
+  extern void fltr_set_mem_err();
+  mem_err = 0;
+
+  if (enable)
+    exceptionHandler(9, fltr_set_mem_err);
+  else
+    exceptionHandler(9, trap_low);
+}
+
+asm ("
+	.text
+	.align 4
+
+_dummy_hw_breakpoint:
+	jmpl %l2, %g0
+	rett %l2+4
+	nop
+	nop
+");
+
+static void
+get_in_break_mode()
+{
+  extern void dummy_hw_breakpoint();
+
+  exceptionHandler (255, dummy_hw_breakpoint);
+
+  asm ("ta 255");
+
+  exceptionHandler (255, trap_low);
+}
+
+/* Convert the SPARC hardware trap type code to a unix signal number. */
+
+static int
+computeSignal(tt)
+     int tt;
+{
+  struct hard_trap_info *ht;
+
+  for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+    if (ht->tt == tt)
+      return ht->signo;
+
+  return SIGHUP;		/* default for things we don't know about */
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+
+static int
+hexToInt(char **ptr, int *intValue)
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+
+  while (**ptr)
+    {
+      hexValue = hex(**ptr);
+      if (hexValue < 0)
+	break;
+
+      *intValue = (*intValue << 4) | hexValue;
+      numChars ++;
+
+      (*ptr)++;
+    }
+
+  return (numChars);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.  It
+ * returns 1 if you should skip the instruction at the trap address, 0
+ * otherwise.
+ */
+
+static void
+handle_exception (registers)
+     unsigned long *registers;
+{
+  int tt;			/* Trap type */
+  int sigval;
+  int addr;
+  int length;
+  char *ptr;
+  unsigned long *sp;
+  unsigned long dsr;
+
+/* First, we must force all of the windows to be spilled out */
+
+  asm("	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	save %sp, -64, %sp
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+");
+
+  get_in_break_mode ();		/* Enable DSU register writes */
+
+  registers[DIA1] = read_asi (1, 0xff00);
+  registers[DIA2] = read_asi (1, 0xff04);
+  registers[DDA1] = read_asi (1, 0xff08);
+  registers[DDA2] = read_asi (1, 0xff0c);
+  registers[DDV1] = read_asi (1, 0xff10);
+  registers[DDV2] = read_asi (1, 0xff14);
+  registers[DCR] = read_asi (1, 0xff18);
+  registers[DSR] = read_asi (1, 0xff1c);
+
+  if (registers[PC] == (unsigned long)breakinst)
+    {
+      registers[PC] = registers[NPC];
+      registers[NPC] += 4;
+    }
+  sp = (unsigned long *)registers[SP];
+
+  dsr = (unsigned long)registers[DSR];
+  if (dsr & 0x3c)
+    tt = 255;
+  else
+    tt = (registers[TBR] >> 4) & 0xff;
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal(tt);
+  ptr = remcomOutBuffer;
+
+  *ptr++ = 'T';
+  *ptr++ = hexchars[sigval >> 4];
+  *ptr++ = hexchars[sigval & 0xf];
+
+  *ptr++ = hexchars[PC >> 4];
+  *ptr++ = hexchars[PC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[PC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[FP >> 4];
+  *ptr++ = hexchars[FP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[SP >> 4];
+  *ptr++ = hexchars[SP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&sp, ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[NPC >> 4];
+  *ptr++ = hexchars[NPC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[NPC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[O7 >> 4];
+  *ptr++ = hexchars[O7 & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[O7], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = 0;
+
+  putpacket(remcomOutBuffer);
+
+  while (1)
+    {
+      remcomOutBuffer[0] = 0;
+
+      getpacket(remcomInBuffer);
+      switch (remcomInBuffer[0])
+	{
+	case '?':
+	  remcomOutBuffer[0] = 'S';
+	  remcomOutBuffer[1] = hexchars[sigval >> 4];
+	  remcomOutBuffer[2] = hexchars[sigval & 0xf];
+	  remcomOutBuffer[3] = 0;
+	  break;
+
+	case 'd':
+				/* toggle debug flag */
+	  break;
+
+	case 'g':		/* return the value of the CPU registers */
+	  memcpy (&registers[L0], sp, 16 * 4); /* Copy L & I regs from stack */
+	  mem2hex ((char *)registers, remcomOutBuffer, NUMREGBYTES, 0);
+	  break;
+
+	case 'G':		/* Set the value of all registers */
+	case 'P':		/* Set the value of one register */
+	  {
+	    unsigned long *newsp, psr;
+
+	    psr = registers[PSR];
+
+	    ptr = &remcomInBuffer[1];
+
+	    if (remcomInBuffer[0] == 'P')
+	      {
+		int regno;
+
+		if (hexToInt (&ptr, &regno)
+		    && *ptr++ == '=')
+		  if (regno >= L0 && regno <= I7)
+		    hex2mem (ptr, sp + regno - L0, 4, 0);
+		  else
+		    hex2mem (ptr, (char *)&registers[regno], 4, 0);
+		else
+		  {
+		    strcpy (remcomOutBuffer, "P01");
+		    break;
+		  }
+	      }
+	    else
+	      {
+		hex2mem (ptr, (char *)registers, NUMREGBYTES, 0);
+		memcpy (sp, &registers[L0], 16 * 4); /* Copy L & I regs to stack */
+	      }
+
+	    /* See if the stack pointer has moved.  If so, then copy the saved
+	       locals and ins to the new location.  This keeps the window
+	       overflow and underflow routines happy.  */
+
+	    newsp = (unsigned long *)registers[SP];
+	    if (sp != newsp)
+	      sp = memcpy(newsp, sp, 16 * 4);
+
+	    /* Don't allow CWP to be modified. */
+
+	    if (psr != registers[PSR])
+	      registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f);
+
+	    strcpy(remcomOutBuffer,"OK");
+	  }
+	  break;
+
+	case 'm':	  /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+	  /* Try to read %x,%x.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length))
+	    {
+	      if (mem2hex((char *)addr, remcomOutBuffer, length, 1))
+		break;
+
+	      strcpy (remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer,"E01");
+	  break;
+
+	case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+	  /* Try to read '%x,%x:'.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length)
+	      && *ptr++ == ':')
+	    {
+	      if (hex2mem(ptr, (char *)addr, length, 1))
+		strcpy(remcomOutBuffer, "OK");
+	      else
+		strcpy(remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer, "E02");
+	  break;
+
+	case 'c':    /* cAA..AA    Continue at address AA..AA(optional) */
+	  /* try to read optional parameter, pc unchanged if no parm */
+
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr, &addr))
+	    {
+	      registers[PC] = addr;
+	      registers[NPC] = addr + 4;
+	    }
+
+/* Need to flush the instruction cache here, as we may have deposited a
+   breakpoint, and the icache probably has no way of knowing that a data ref to
+   some location may have changed something that is in the instruction cache.
+ */
+
+	  flush_i_cache ();
+
+	  if (!(registers[DSR] & 0x1) /* DSU enabled? */
+	      && !(registers[DCR] & 0x200)) /* Are we in break state? */
+	    {			/* Yes, set the DSU regs */
+	      write_asi (1, 0xff00, registers[DIA1]);
+	      write_asi (1, 0xff04, registers[DIA2]);
+	      write_asi (1, 0xff08, registers[DDA1]);
+	      write_asi (1, 0xff0c, registers[DDA2]);
+	      write_asi (1, 0xff10, registers[DDV1]);
+	      write_asi (1, 0xff14, registers[DDV2]);
+	      write_asi (1, 0xff1c, registers[DSR]);
+	      write_asi (1, 0xff18, registers[DCR] | 0x200); /* Clear break */
+	    }
+
+	  return;
+
+	  /* kill the program */
+	case 'k' :		/* do nothing */
+	  break;
+#if 0
+	case 't':		/* Test feature */
+	  asm (" std %f30,[%sp]");
+	  break;
+#endif
+	case 'r':		/* Reset */
+	  asm ("call 0
+		nop ");
+	  break;
+
+#if 0
+Disabled until we can unscrew this properly
+
+	case 'b':	  /* bBB...  Set baud rate to BB... */
+	  {
+	    int baudrate;
+	    extern void set_timer_3();
+
+	    ptr = &remcomInBuffer[1];
+	    if (!hexToInt(&ptr, &baudrate))
+	      {
+		strcpy(remcomOutBuffer,"B01");
+		break;
+	      }
+
+	    /* Convert baud rate to uart clock divider */
+	    switch (baudrate)
+	      {
+	      case 38400:
+		baudrate = 16;
+		break;
+	      case 19200:
+		baudrate = 33;
+		break;
+	      case 9600:
+		baudrate = 65;
+		break;
+	      default:
+		strcpy(remcomOutBuffer,"B02");
+		goto x1;
+	      }
+
+	    putpacket("OK");	/* Ack before changing speed */
+	    set_timer_3(baudrate); /* Set it */
+	  }
+x1:	  break;
+#endif
+	}			/* switch */
+
+      /* reply to the request */
+      putpacket(remcomOutBuffer);
+    }
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint()
+{
+  if (!initialized)
+    return;
+
+  asm("	.globl _breakinst
+
+	_breakinst: ta 1
+      ");
+}
diff --git a/gdb/sparcl-tdep.c b/gdb/sparcl-tdep.c
new file mode 100644
index 0000000..e39bf30
--- /dev/null
+++ b/gdb/sparcl-tdep.c
@@ -0,0 +1,970 @@
+/* Target dependent code for the Fujitsu SPARClite for GDB, the GNU debugger.
+   Copyright 1994, 1995, 1996  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "breakpoint.h"
+#include "target.h"
+#include "serial.h"
+#include <sys/types.h>
+
+#if (!defined(__GO32__) && !defined(_WIN32)) || defined(__CYGWIN32__)
+#define HAVE_SOCKETS
+#include <sys/time.h>
+#include <unistd.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#endif
+
+extern struct target_ops sparclite_ops;	/* Forward decl */
+extern struct target_ops remote_ops;
+
+static char *remote_target_name = NULL;
+static serial_t remote_desc = NULL;
+static int serial_flag;
+#ifdef HAVE_SOCKETS
+static int udp_fd = -1;
+#endif
+
+static serial_t open_tty PARAMS ((char *name));
+static int send_resp PARAMS ((serial_t desc, char c));
+static void close_tty PARAMS ((int ignore));
+#ifdef HAVE_SOCKETS
+static int recv_udp_buf PARAMS ((int fd, unsigned char *buf, int len, int timeout));
+static int send_udp_buf PARAMS ((int fd, unsigned char *buf, int len));
+#endif
+static void sparclite_open PARAMS ((char *name, int from_tty));
+static void sparclite_close PARAMS ((int quitting));
+static void download PARAMS ((char *target_name, char *args, int from_tty,
+			      void (*write_routine) (bfd *from_bfd,
+						     asection *from_sec,
+						     file_ptr from_addr,
+						     bfd_vma to_addr, int len),
+			      void (*start_routine) (bfd_vma entry)));
+static void sparclite_serial_start PARAMS ((bfd_vma entry));
+static void sparclite_serial_write PARAMS ((bfd *from_bfd, asection *from_sec,
+					    file_ptr from_addr,
+					    bfd_vma to_addr, int len));
+#ifdef HAVE_SOCKETS
+static unsigned short calc_checksum PARAMS ((unsigned char *buffer,
+					     int count));
+static void sparclite_udp_start PARAMS ((bfd_vma entry));
+static void sparclite_udp_write PARAMS ((bfd *from_bfd, asection *from_sec,
+					 file_ptr from_addr, bfd_vma to_addr,
+					 int len));
+#endif
+static void sparclite_download PARAMS ((char *filename, int from_tty));
+
+#define DDA2_SUP_ASI		0xb000000
+#define DDA1_SUP_ASI		0xb0000
+
+#define DDA2_ASI_MASK 		0xff000000
+#define DDA1_ASI_MASK 		0xff0000 
+#define DIA2_SUP_MODE 		0x8000
+#define DIA1_SUP_MODE 		0x4000
+#define DDA2_ENABLE 		0x100
+#define DDA1_ENABLE 		0x80
+#define DIA2_ENABLE 		0x40
+#define DIA1_ENABLE 		0x20
+#define DSINGLE_STEP 		0x10		/* not used */
+#define DDV_TYPE_MASK 		0xc
+#define DDV_TYPE_LOAD 		0x0
+#define DDV_TYPE_STORE 		0x4
+#define DDV_TYPE_ACCESS 	0x8
+#define DDV_TYPE_ALWAYS		0xc
+#define DDV_COND		0x2
+#define DDV_MASK		0x1
+
+int
+sparclite_insert_watchpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     int type;
+{
+  CORE_ADDR dcr;
+
+  dcr = read_register (DCR_REGNUM);
+
+  if (!(dcr & DDA1_ENABLE))
+    {
+      write_register (DDA1_REGNUM, addr);
+      dcr &= ~(DDA1_ASI_MASK | DDV_TYPE_MASK);
+      dcr |= (DDA1_SUP_ASI | DDA1_ENABLE);
+      if (type == 1)
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_LOAD & (~DDV_COND & ~DDV_MASK));
+	}   
+      else if (type == 0)
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_STORE & (~DDV_COND & ~DDV_MASK));
+	}
+      else
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_ACCESS);
+	}
+      write_register (DCR_REGNUM, dcr);
+    }
+  else if (!(dcr & DDA2_ENABLE))
+    {
+      write_register (DDA2_REGNUM, addr);
+      dcr &= ~(DDA2_ASI_MASK & DDV_TYPE_MASK);
+      dcr |= (DDA2_SUP_ASI | DDA2_ENABLE);
+      if (type == 1)
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_LOAD & ~DDV_COND & ~DDV_MASK);
+	}
+      else if (type == 0)
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_STORE & ~DDV_COND & ~DDV_MASK);
+	}
+      else
+	{
+	  write_register (DDV1_REGNUM, 0);
+	  write_register (DDV2_REGNUM, 0xffffffff);
+	  dcr |= (DDV_TYPE_ACCESS);
+	}
+      write_register (DCR_REGNUM, dcr);
+    }
+  else
+    return -1;
+
+  return 0;
+} 
+
+int
+sparclite_remove_watchpoint (addr, len, type)
+     CORE_ADDR addr;
+     int len;
+     int type;
+{
+  CORE_ADDR dcr, dda1, dda2;
+
+  dcr = read_register (DCR_REGNUM);
+  dda1 = read_register (DDA1_REGNUM);
+  dda2 = read_register (DDA2_REGNUM);
+
+  if ((dcr & DDA1_ENABLE) && addr == dda1)
+    write_register (DCR_REGNUM, (dcr & ~DDA1_ENABLE));
+  else if ((dcr & DDA2_ENABLE) && addr == dda2)
+    write_register (DCR_REGNUM, (dcr & ~DDA2_ENABLE));
+  else
+    return -1;
+
+  return 0;
+}
+
+int
+sparclite_insert_hw_breakpoint (addr, len)
+     CORE_ADDR addr;
+     int len;
+{
+  CORE_ADDR dcr;
+
+  dcr = read_register (DCR_REGNUM);
+  
+  if (!(dcr & DIA1_ENABLE))
+    {
+      write_register (DIA1_REGNUM, addr);
+      write_register (DCR_REGNUM, (dcr | DIA1_ENABLE | DIA1_SUP_MODE));
+    }
+  else if (!(dcr & DIA2_ENABLE))
+    {
+      write_register (DIA2_REGNUM, addr);
+      write_register (DCR_REGNUM, (dcr | DIA2_ENABLE | DIA2_SUP_MODE));
+    }
+  else
+    return -1;
+
+  return 0;
+}
+
+int
+sparclite_remove_hw_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     int shadow;
+{
+  CORE_ADDR dcr, dia1, dia2;
+
+  dcr = read_register (DCR_REGNUM);
+  dia1 = read_register (DIA1_REGNUM);
+  dia2 = read_register (DIA2_REGNUM);
+  
+  if ((dcr & DIA1_ENABLE) && addr == dia1)
+    write_register (DCR_REGNUM, (dcr & ~DIA1_ENABLE));
+  else if ((dcr & DIA2_ENABLE) && addr == dia2)
+    write_register (DCR_REGNUM, (dcr & ~DIA2_ENABLE));
+  else
+    return -1;
+
+  return 0;
+}
+
+int
+sparclite_check_watch_resources (type, cnt, ot)
+     int type;
+     int cnt;
+     int ot;
+{
+  /* Watchpoints not supported on simulator.  */
+  if (strcmp (target_shortname, "sim") == 0)
+    return 0;
+
+  if (type == bp_hardware_breakpoint)
+    {
+      if (TARGET_HW_BREAK_LIMIT == 0)
+	return 0;
+      else if (cnt <= TARGET_HW_BREAK_LIMIT)
+	return 1;
+    }
+  else
+    {
+      if (TARGET_HW_WATCH_LIMIT == 0)
+	return 0;
+      else if (ot)
+	return -1;
+      else if (cnt <= TARGET_HW_WATCH_LIMIT)
+	return 1;
+    }
+  return -1;
+}
+
+CORE_ADDR
+sparclite_stopped_data_address ()
+{
+  CORE_ADDR dsr, dda1, dda2;
+
+  dsr = read_register (DSR_REGNUM);
+  dda1 = read_register (DDA1_REGNUM);
+  dda2 = read_register (DDA2_REGNUM);
+
+  if (dsr & 0x10)
+    return dda1;
+  else if (dsr & 0x20)
+    return dda2;
+  else
+    return 0;
+}
+
+static serial_t
+open_tty (name)
+     char *name;
+{
+  serial_t desc;
+
+  desc = SERIAL_OPEN (name);
+  if (!desc)
+    perror_with_name (name);
+
+  if (baud_rate != -1)
+    {
+      if (SERIAL_SETBAUDRATE (desc, baud_rate))
+	{
+	  SERIAL_CLOSE (desc);
+	  perror_with_name (name);
+	}
+    }
+
+  SERIAL_RAW (desc);
+
+  SERIAL_FLUSH_INPUT (desc);
+
+  return desc;
+}
+
+/* Read a single character from the remote end, masking it down to 7 bits. */
+
+static int
+readchar (desc, timeout)
+     serial_t desc;
+     int timeout;
+{
+  int ch;
+  char s[10];
+
+  ch = SERIAL_READCHAR (desc, timeout);
+
+  switch (ch)
+    {
+    case SERIAL_EOF:
+      error ("SPARClite remote connection closed");
+    case SERIAL_ERROR:
+      perror_with_name ("SPARClite communication error");
+    case SERIAL_TIMEOUT:
+      error ("SPARClite remote timeout");
+    default:
+      if (remote_debug > 0)
+	{
+	  sprintf (s, "[%02x]", ch & 0xff);
+	  puts_debug ("read -->", s, "<--");
+	}
+      return ch;
+    }
+}
+
+static void
+debug_serial_write (desc, buf, len)
+     serial_t desc;
+     char *buf;
+     int len;
+{
+  char s[10];
+
+  SERIAL_WRITE (desc, buf, len);
+  if (remote_debug > 0)
+    {
+      while (len-- > 0)
+	{
+	  sprintf (s, "[%02x]", *buf & 0xff);
+	  puts_debug ("Sent -->", s, "<--");
+	  buf++;
+	}
+    }
+}
+
+
+static int
+send_resp (desc, c)
+     serial_t desc;
+     char c;
+{
+  debug_serial_write (desc, &c, 1);
+  return readchar (desc, remote_timeout);
+}
+
+static void
+close_tty (ignore)
+     int ignore;
+{
+  if (!remote_desc)
+    return;
+
+  SERIAL_CLOSE (remote_desc);
+
+  remote_desc = NULL;
+}
+
+#ifdef HAVE_SOCKETS
+static int
+recv_udp_buf (fd, buf, len, timeout)
+     int fd, len;
+     unsigned char *buf;
+     int timeout;
+{
+  int cc;
+  fd_set readfds;
+
+  FD_ZERO (&readfds);
+  FD_SET (fd, &readfds);
+
+  if (timeout >= 0)
+    {
+      struct timeval timebuf;
+
+      timebuf.tv_sec = timeout;
+      timebuf.tv_usec = 0;
+      cc = select (fd + 1, &readfds, 0, 0, &timebuf);
+    }
+  else
+    cc = select (fd + 1, &readfds, 0, 0, 0);
+
+  if (cc == 0)
+    return 0;
+
+  if (cc != 1)
+    perror_with_name ("recv_udp_buf: Bad return value from select:");
+
+  cc = recv (fd, buf, len, 0);
+
+  if (cc < 0)
+    perror_with_name ("Got an error from recv: ");
+}
+
+static int
+send_udp_buf (fd, buf, len)
+     int fd, len;
+     unsigned char *buf;
+{
+  int cc;
+
+  cc = send (fd, buf, len, 0);
+
+  if (cc == len)
+    return;
+
+  if (cc < 0)
+    perror_with_name ("Got an error from send: ");
+
+  error ("Short count in send: tried %d, sent %d\n", len, cc);
+}
+#endif /* HAVE_SOCKETS */
+
+static void
+sparclite_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  struct cleanup *old_chain;
+  int c;
+  char *p;
+
+  if (!name)
+    error ("You need to specify what device or hostname is associated with the SparcLite board.");
+
+  target_preopen (from_tty);
+
+  unpush_target (&sparclite_ops);
+
+  if (remote_target_name)
+    free (remote_target_name);
+
+  remote_target_name = strsave (name);
+
+  /* We need a 'serial' or 'udp' keyword to disambiguate host:port, which can
+     mean either a serial port on a terminal server, or the IP address of a
+     SPARClite demo board.  If there's no colon, then it pretty much has to be
+     a local device (except for DOS... grrmble) */
+
+  p = strchr (name, ' ');
+
+  if (p)
+    {
+      *p++ = '\000';
+      while ((*p != '\000') && isspace (*p)) p++;
+
+      if (strncmp (name, "serial", strlen (name)) == 0)
+	serial_flag = 1;
+      else if (strncmp (name, "udp", strlen (name)) == 0)
+	serial_flag = 0;
+      else
+	error ("Must specify either `serial' or `udp'.");
+    }
+  else
+    {
+      p = name;
+
+      if (!strchr (name, ':'))
+	serial_flag = 1;	/* No colon is unambiguous (local device) */
+      else
+	error ("Usage: target sparclite serial /dev/ttyb\n\
+or: target sparclite udp host");
+    }
+
+  if (serial_flag)
+    {
+      remote_desc = open_tty (p);
+
+      old_chain = make_cleanup ((make_cleanup_func) close_tty, 0);
+
+      c = send_resp (remote_desc, 0x00);
+
+      if (c != 0xaa)
+	error ("Unknown response (0x%x) from SparcLite.  Try resetting the board.",
+	       c);
+
+      c = send_resp (remote_desc, 0x55);
+
+      if (c != 0x55)
+	error ("Sparclite appears to be ill.");
+    }
+  else
+    {
+#ifdef HAVE_SOCKETS
+      struct hostent *he;
+      struct sockaddr_in sockaddr;
+      unsigned char buffer[100];
+      int cc;
+
+      /* Setup the socket.  Must be raw UDP. */
+
+      he = gethostbyname (p);
+
+      if (!he)
+	error ("No such host %s.", p);
+
+      udp_fd = socket (PF_INET, SOCK_DGRAM, 0);
+
+      old_chain = make_cleanup (close, udp_fd);
+
+      sockaddr.sin_family = PF_INET;
+      sockaddr.sin_port = htons(7000);
+      memcpy (&sockaddr.sin_addr.s_addr, he->h_addr, sizeof (struct in_addr));
+
+      if (connect (udp_fd, &sockaddr, sizeof(sockaddr)))
+	perror_with_name ("Connect failed");
+
+      buffer[0] = 0x5;
+      buffer[1] = 0;
+
+      send_udp_buf (udp_fd, buffer, 2);	/* Request version */
+      cc = recv_udp_buf (udp_fd, buffer, sizeof(buffer), 5); /* Get response */
+      if (cc == 0)
+	error ("SPARClite isn't responding.");
+
+      if (cc < 3)
+	error ("SPARClite appears to be ill.");
+#else
+      error ("UDP downloading is not supported for DOS hosts.");
+#endif /* HAVE_SOCKETS */
+    }
+
+  printf_unfiltered ("[SPARClite appears to be alive]\n");
+
+  push_target (&sparclite_ops);
+
+  discard_cleanups (old_chain);
+
+  return;
+}
+
+static void
+sparclite_close (quitting)
+     int quitting;
+{
+  if (serial_flag)
+    close_tty (0);
+#ifdef HAVE_SOCKETS
+  else
+    if (udp_fd != -1)
+      close (udp_fd);
+#endif
+}
+
+#define LOAD_ADDRESS 0x40000000
+
+static void
+download (target_name, args, from_tty, write_routine, start_routine)
+     char *target_name;
+     char *args;
+     int from_tty;
+     void (*write_routine) PARAMS ((bfd *from_bfd, asection *from_sec,
+				    file_ptr from_addr, bfd_vma to_addr, int len));
+     void (*start_routine) PARAMS ((bfd_vma entry));
+{
+  struct cleanup *old_chain;
+  asection *section;
+  bfd *pbfd;
+  bfd_vma entry;
+  int i;
+#define WRITESIZE 1024
+  char *filename;
+  int quiet;
+  int nostart;
+
+  quiet = 0;
+  nostart = 0;
+  filename = NULL;
+
+  while (*args != '\000')
+    {
+      char *arg;
+
+      while (isspace (*args)) args++;
+
+      arg = args;
+
+      while ((*args != '\000') && !isspace (*args)) args++;
+
+      if (*args != '\000')
+	*args++ = '\000';
+
+      if (*arg != '-')
+	filename = arg;
+      else if (strncmp (arg, "-quiet", strlen (arg)) == 0)
+	quiet = 1;
+      else if (strncmp (arg, "-nostart", strlen (arg)) == 0)
+	nostart = 1;
+      else
+	error ("unknown option `%s'", arg);
+    }
+
+  if (!filename)
+    filename = get_exec_file (1);
+
+  pbfd = bfd_openr (filename, gnutarget);
+  if (pbfd == NULL)
+    {
+      perror_with_name (filename);
+      return;
+    }
+  old_chain = make_cleanup ((make_cleanup_func) bfd_close, pbfd);
+
+  if (!bfd_check_format (pbfd, bfd_object)) 
+    error ("\"%s\" is not an object file: %s", filename,
+	   bfd_errmsg (bfd_get_error ()));
+
+  for (section = pbfd->sections; section; section = section->next) 
+    {
+      if (bfd_get_section_flags (pbfd, section) & SEC_LOAD)
+	{
+	  bfd_vma	section_address;
+	  bfd_size_type section_size;
+	  file_ptr	fptr;
+	  const char   *section_name;
+
+	  section_name = bfd_get_section_name(pbfd, section);
+
+	  section_address = bfd_get_section_vma (pbfd, section);
+
+	  /* Adjust sections from a.out files, since they don't
+	     carry their addresses with.  */
+	  if (bfd_get_flavour (pbfd) == bfd_target_aout_flavour)
+	    {
+	      if (strcmp (section_name, ".text") == 0)
+		section_address = bfd_get_start_address (pbfd);
+	      else if (strcmp (section_name, ".data") == 0)
+		{
+		  /* Read the first 8 bytes of the data section.
+		     There should be the string 'DaTa' followed by
+		     a word containing the actual section address. */
+		  struct data_marker
+		  {
+		    char signature[4];	/* 'DaTa' */
+		    unsigned char sdata[4];	/* &sdata */
+		  } marker;
+		  bfd_get_section_contents (pbfd, section, &marker, 0,
+					    sizeof (marker));
+		  if (strncmp (marker.signature, "DaTa", 4) == 0)
+		    {
+		      if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+			section_address = bfd_getb32 (marker.sdata);
+		      else
+			section_address = bfd_getl32 (marker.sdata);
+		    }
+		}
+	    }
+
+	  section_size = bfd_get_section_size_before_reloc (section);
+
+	  if (!quiet)
+	    printf_filtered ("[Loading section %s at 0x%x (%d bytes)]\n",
+			     bfd_get_section_name (pbfd, section),
+			     section_address,
+			     section_size);
+
+	  fptr = 0;
+	  while (section_size > 0)
+	    {
+	      int count;
+	      static char inds[] = "|/-\\";
+	      static int k = 0;
+
+	      QUIT;
+
+	      count = min (section_size, WRITESIZE);
+
+	      write_routine (pbfd, section, fptr, section_address, count);
+
+	      if (!quiet)
+		{
+		  printf_unfiltered ("\r%c", inds[k++ % 4]);
+		  gdb_flush (gdb_stdout);
+		}
+
+	      section_address += count;
+	      fptr += count;
+	      section_size -= count;
+	    }
+	}
+    }
+
+  if (!nostart)
+    {
+      entry = bfd_get_start_address (pbfd);
+
+      if (!quiet)
+	printf_unfiltered ("[Starting %s at 0x%x]\n", filename, entry);
+
+      start_routine (entry);
+    }
+
+  do_cleanups (old_chain);
+}
+
+static void
+sparclite_serial_start (entry)
+     bfd_vma entry;
+{
+  char buffer[5];
+  int i;
+
+  buffer[0] = 0x03;
+  store_unsigned_integer (buffer + 1, 4, entry);
+
+  debug_serial_write (remote_desc, buffer, 1 + 4);
+  i = readchar (remote_desc, remote_timeout);
+  if (i != 0x55)
+    error ("Can't start SparcLite.  Error code %d\n", i);
+}
+
+static void
+sparclite_serial_write (from_bfd, from_sec, from_addr, to_addr, len)
+     bfd *from_bfd;
+     asection *from_sec;
+     file_ptr from_addr;
+     bfd_vma to_addr;
+     int len;
+{
+  char buffer[4 + 4 + WRITESIZE]; /* addr + len + data */
+  unsigned char checksum;
+  int i;
+
+  store_unsigned_integer (buffer, 4, to_addr); /* Address */
+  store_unsigned_integer (buffer + 4, 4, len); /* Length */
+
+  bfd_get_section_contents (from_bfd, from_sec, buffer + 8, from_addr, len);
+
+  checksum = 0;
+  for (i = 0; i < len; i++)
+    checksum += buffer[8 + i];
+
+  i = send_resp (remote_desc, 0x01);
+
+  if (i != 0x5a)
+    error ("Bad response from load command (0x%x)", i);
+
+  debug_serial_write (remote_desc, buffer, 4 + 4 + len);
+  i = readchar (remote_desc, remote_timeout);
+
+  if (i != checksum)
+    error ("Bad checksum from load command (0x%x)", i);
+}
+
+#ifdef HAVE_SOCKETS
+
+static unsigned short
+calc_checksum (buffer, count)
+     unsigned char *buffer;
+     int count;
+{
+  unsigned short checksum;
+
+  checksum = 0;
+  for (; count > 0; count -= 2, buffer += 2)
+    checksum += (*buffer << 8) | *(buffer + 1);
+
+  if (count != 0)
+    checksum += *buffer << 8;
+
+  return checksum;
+}
+
+static void
+sparclite_udp_start (entry)
+     bfd_vma entry;
+{
+  unsigned char buffer[6];
+  int i;
+
+  buffer[0] = 0x3;
+  buffer[1] = 0;
+  buffer[2] = entry >> 24;
+  buffer[3] = entry >> 16;
+  buffer[4] = entry >> 8;
+  buffer[5] = entry;
+
+  send_udp_buf (udp_fd, buffer, 6); /* Send start addr */
+  i = recv_udp_buf (udp_fd, buffer, sizeof(buffer), -1); /* Get response */
+
+  if (i < 1 || buffer[0] != 0x55)
+    error ("Failed to take start address.");
+}
+
+static void
+sparclite_udp_write (from_bfd, from_sec, from_addr, to_addr, len)
+     bfd *from_bfd;
+     asection *from_sec;
+     file_ptr from_addr;
+     bfd_vma to_addr;
+     int len;
+{
+  unsigned char buffer[2000];
+  unsigned short checksum;
+  static int pkt_num = 0;
+  static unsigned long old_addr = -1;
+  int i;
+
+  while (1)
+    {
+      if (to_addr != old_addr)
+	{
+	  buffer[0] = 0x1;	/* Load command */
+	  buffer[1] = 0x1;	/* Loading address */
+	  buffer[2] = to_addr >> 24;
+	  buffer[3] = to_addr >> 16;
+	  buffer[4] = to_addr >> 8;
+	  buffer[5] = to_addr;
+
+	  checksum = 0;
+	  for (i = 0; i < 6; i++)
+	    checksum += buffer[i];
+	  checksum &= 0xff;
+
+	  send_udp_buf (udp_fd, buffer, 6);
+	  i = recv_udp_buf (udp_fd, buffer, sizeof buffer, -1);
+
+	  if (i < 1)
+	    error ("Got back short checksum for load addr.");
+
+	  if (checksum != buffer[0])
+	    error ("Got back bad checksum for load addr.");
+
+	  pkt_num = 0;		/* Load addr resets packet seq # */
+	  old_addr = to_addr;
+	}
+
+      bfd_get_section_contents (from_bfd, from_sec, buffer + 6, from_addr,
+				len);
+
+      checksum = calc_checksum (buffer + 6, len);
+
+      buffer[0] = 0x1;		/* Load command */
+      buffer[1] = 0x2;		/* Loading data */
+      buffer[2] = pkt_num >> 8;
+      buffer[3] = pkt_num;
+      buffer[4] = checksum >> 8;
+      buffer[5] = checksum;
+
+      send_udp_buf (udp_fd, buffer, len + 6);
+      i = recv_udp_buf (udp_fd, buffer, sizeof buffer, 3);
+
+      if (i == 0)
+	{
+	  fprintf_unfiltered (gdb_stderr, "send_data: timeout sending %d bytes to address 0x%x retrying\n", len, to_addr);
+	  continue;
+	}
+
+      if (buffer[0] != 0xff)
+	error ("Got back bad response for load data.");
+
+      old_addr += len;
+      pkt_num++;
+
+      return;
+    }
+}
+
+#endif /* HAVE_SOCKETS */
+
+static void
+sparclite_download (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  if (!serial_flag)
+#ifdef HAVE_SOCKETS
+    download (remote_target_name, filename, from_tty, sparclite_udp_write,
+	      sparclite_udp_start);
+#else
+    abort ();			/* sparclite_open should prevent this! */
+#endif
+  else
+    download (remote_target_name, filename, from_tty, sparclite_serial_write,
+	      sparclite_serial_start);
+}
+
+/* Define the target subroutine names */
+
+static struct target_ops sparclite_ops ;
+
+static void 
+init_sparclite_ops(void)
+{
+  sparclite_ops.to_shortname =   "sparclite";		
+  sparclite_ops.to_longname =   "SPARClite remote target";
+  sparclite_ops.to_doc =   "Use a remote SPARClite target board via a serial line; using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";  
+  sparclite_ops.to_open =   sparclite_open;	
+  sparclite_ops.to_close =   sparclite_close;	
+  sparclite_ops.to_attach =   0;	
+  sparclite_ops.to_post_attach = NULL;
+  sparclite_ops.to_require_attach = NULL;
+  sparclite_ops.to_detach =   0;
+  sparclite_ops.to_require_detach = NULL;	
+  sparclite_ops.to_resume =   0;	
+  sparclite_ops.to_wait  =   0;
+  sparclite_ops.to_post_wait = NULL;		
+  sparclite_ops.to_fetch_registers  =   0;
+  sparclite_ops.to_store_registers  =   0;
+  sparclite_ops.to_prepare_to_store =   0;
+  sparclite_ops.to_xfer_memory  =   0;		
+  sparclite_ops.to_files_info  =   0;		
+  sparclite_ops.to_insert_breakpoint =   0;	
+  sparclite_ops.to_remove_breakpoint =   0;	
+  sparclite_ops.to_terminal_init  =   0;	
+  sparclite_ops.to_terminal_inferior =   0;	
+  sparclite_ops.to_terminal_ours_for_output =   0;
+  sparclite_ops.to_terminal_ours  =   0;		
+  sparclite_ops.to_terminal_info  =   0;		
+  sparclite_ops.to_kill  =   0;			
+  sparclite_ops.to_load  =   sparclite_download;
+  sparclite_ops.to_lookup_symbol =   0;		
+  sparclite_ops.to_create_inferior =   0;
+  sparclite_ops.to_post_startup_inferior = NULL;
+  sparclite_ops.to_acknowledge_created_inferior = NULL;
+  sparclite_ops.to_clone_and_follow_inferior = NULL;
+  sparclite_ops.to_post_follow_inferior_by_clone = NULL;
+  sparclite_ops.to_insert_fork_catchpoint = NULL;
+  sparclite_ops.to_remove_fork_catchpoint = NULL;
+  sparclite_ops.to_insert_vfork_catchpoint = NULL;
+  sparclite_ops.to_remove_vfork_catchpoint = NULL;
+  sparclite_ops.to_has_forked = NULL;
+  sparclite_ops.to_has_vforked = NULL;
+  sparclite_ops.to_can_follow_vfork_prior_to_exec = NULL;
+  sparclite_ops.to_post_follow_vfork = NULL;	
+  sparclite_ops.to_insert_exec_catchpoint = NULL;
+  sparclite_ops.to_remove_exec_catchpoint = NULL;
+  sparclite_ops.to_has_execd = NULL;
+  sparclite_ops.to_reported_exec_events_per_exec_call = NULL;
+  sparclite_ops.to_has_exited = NULL;
+  sparclite_ops.to_mourn_inferior =   0;	
+  sparclite_ops.to_can_run  =   0;		
+  sparclite_ops.to_notice_signals =   0;	
+  sparclite_ops.to_thread_alive  =   0;		
+  sparclite_ops.to_stop  =   0;
+  sparclite_ops.to_pid_to_exec_file = NULL;	
+  sparclite_ops.to_core_file_to_sym_file = NULL;		
+  sparclite_ops.to_stratum =   download_stratum;
+  sparclite_ops.DONT_USE =   0;			
+  sparclite_ops.to_has_all_memory =   0;	
+  sparclite_ops.to_has_memory =   0;		
+  sparclite_ops.to_has_stack =   0;		
+  sparclite_ops.to_has_registers =   0;		
+  sparclite_ops.to_has_execution =   0;		
+  sparclite_ops.to_sections =   0;		
+  sparclite_ops.to_sections_end =   0;		
+  sparclite_ops.to_magic =   OPS_MAGIC	;	
+} /* init_sparclite_ops */
+
+void
+_initialize_sparcl_tdep ()
+{
+  init_sparclite_ops() ;
+  add_target (&sparclite_ops);
+}
diff --git a/gdb/sparclet-rom.c b/gdb/sparclet-rom.c
new file mode 100644
index 0000000..992cca1
--- /dev/null
+++ b/gdb/sparclet-rom.c
@@ -0,0 +1,296 @@
+/* Remote target glue for the SPARC Sparclet ROM monitor.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "srec.h"
+#include "symtab.h"
+#include "symfile.h" /* for generic_load */
+#include <time.h>
+
+extern void report_transfer_performance PARAMS ((unsigned long, time_t, time_t));
+
+static struct target_ops sparclet_ops;
+
+static void sparclet_open PARAMS ((char *args, int from_tty));
+
+/* This array of registers need to match the indexes used by GDB.
+   This exists because the various ROM monitors use different strings
+   than does GDB, and don't necessarily support all the registers
+   either. So, typing "info reg sp" becomes a "r30".  */
+
+/*PSR 0x00000080  impl ver icc AW LE EE EC EF PIL S PS ET CWP  WIM
+                0x0  0x0 0x0  0  0  0  0  0 0x0 1  0  0 0x00 0x2
+                                                             0000010
+       INS        LOCALS       OUTS      GLOBALS
+ 0  0x00000000  0x00000000  0x00000000  0x00000000
+ 1  0x00000000  0x00000000  0x00000000  0x00000000
+ 2  0x00000000  0x00000000  0x00000000  0x00000000
+ 3  0x00000000  0x00000000  0x00000000  0x00000000
+ 4  0x00000000  0x00000000  0x00000000  0x00000000
+ 5  0x00000000  0x00001000  0x00000000  0x00000000
+ 6  0x00000000  0x00000000  0x123f0000  0x00000000
+ 7  0x00000000  0x00000000  0x00000000  0x00000000
+pc:  0x12010000 0x00000000    unimp
+npc: 0x12010004 0x00001000    unimp     0x1000
+tbr: 0x00000000
+y:   0x00000000
+*/
+/* these correspond to the offsets from tm-* files from config directories */
+
+/* is wim part of psr?? */
+/* monitor wants lower case */
+static char *sparclet_regnames[NUM_REGS] = REGISTER_NAMES;
+
+
+/* Function: sparclet_supply_register
+   Just returns with no action.
+   This function is required, because parse_register_dump (monitor.c)
+   expects to be able to call it.  If we don't supply something, it will
+   call a null pointer and core-dump.  Since this function does not 
+   actually do anything, GDB will request the registers individually.  */
+
+static void
+sparclet_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  return;
+}
+
+static void
+sparclet_load (desc, file, hashmark)
+     serial_t desc;
+     char *file;
+     int hashmark;
+{
+  bfd *abfd;
+  asection *s;
+  int i;
+  CORE_ADDR load_offset;
+  time_t start_time, end_time;
+  unsigned long data_count = 0;
+
+  /* enable user to specify address for downloading as 2nd arg to load */
+
+  i = sscanf(file, "%*s 0x%lx", &load_offset);
+  if (i >= 1 ) 
+    {
+      char *p;
+
+      for (p = file; *p != '\000' && !isspace (*p); p++);
+
+      *p = '\000';
+    }
+  else
+    load_offset = 0;
+
+  abfd = bfd_openr (file, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", file);
+      return;
+    }
+
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+  
+  start_time = time (NULL);
+
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	bfd_size_type section_size;
+	bfd_vma vma;
+
+	vma = bfd_get_section_vma (abfd, s) + load_offset;
+	section_size = bfd_section_size (abfd, s);
+
+	data_count += section_size;
+
+	printf_filtered ("%s\t: 0x%4x .. 0x%4x  ",
+			 bfd_get_section_name (abfd, s), vma,
+			 vma + section_size);
+	gdb_flush (gdb_stdout);
+
+	monitor_printf ("load c r %x %x\r", vma, section_size);
+
+	monitor_expect ("load: loading ", NULL, 0);
+	monitor_expect ("\r", NULL, 0);
+
+	for (i = 0; i < section_size; i += 2048)
+	  {
+	    int numbytes;
+	    char buf[2048];
+
+	    numbytes = min (sizeof buf, section_size - i);
+
+	    bfd_get_section_contents (abfd, s, buf, i, numbytes);
+
+	    SERIAL_WRITE (desc, buf, numbytes);
+
+	    if (hashmark)
+	      {
+		putchar_unfiltered ('#');
+		gdb_flush (gdb_stdout);
+	      }
+	  }			/* Per-packet (or S-record) loop */
+
+	monitor_expect_prompt (NULL, 0);
+
+	putchar_unfiltered ('\n');
+      }				/* Loadable sections */
+
+  monitor_printf ("reg pc %x\r", bfd_get_start_address (abfd));
+  monitor_expect_prompt (NULL, 0);
+  monitor_printf ("reg npc %x\r", bfd_get_start_address (abfd) + 4);
+  monitor_expect_prompt (NULL, 0);
+
+  monitor_printf ("run\r");
+
+  end_time = time (NULL);
+
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+
+  report_transfer_performance (data_count, start_time, end_time);
+
+  pop_target ();
+  push_remote_target (monitor_get_dev_name (), 1);
+
+  return_to_top_level (RETURN_QUIT);
+}
+
+/* Define the monitor command strings. Since these are passed directly
+   through to a printf style function, we may include formatting
+   strings. We also need a CR or LF on the end.  */
+
+/* need to pause the monitor for timing reasons, so slow it down */
+
+static char *sparclet_inits[] = {"\n\r\r\n", NULL};
+
+static struct monitor_ops sparclet_cmds ;
+
+static void 
+init_sparclet_cmds(void)
+{
+  sparclet_cmds.flags =   MO_CLR_BREAK_USES_ADDR |
+    MO_HEX_PREFIX          |
+    MO_NO_ECHO_ON_OPEN     |
+    MO_NO_ECHO_ON_SETMEM   |
+    MO_RUN_FIRST_TIME      |
+    MO_GETMEM_READ_SINGLE ;	/* flags */
+  sparclet_cmds.init =   sparclet_inits;		/* Init strings */
+  sparclet_cmds.cont =   "cont\r";			/* continue command */
+  sparclet_cmds.step =   "step\r";			/* single step */
+  sparclet_cmds.stop =   "\r";				/* break interrupts the program */
+  sparclet_cmds.set_break =   "+bp %x\r";		/* set a breakpoint */
+  sparclet_cmds.clr_break =  "-bp %x\r" ;		/* can't use "br" because only 2 hw bps are supported */
+  sparclet_cmds.clr_all_break =   "-bp %x\r";		/* clear a breakpoint */
+  "-bp\r" ;			/* clear all breakpoints */
+  sparclet_cmds.fill =   "fill %x -n %x -v %x -b\r";	/* fill (start length val) */
+  /* can't use "fi" because it takes words, not bytes */
+  /* ex [addr] [-n count] [-b|-s|-l]          default: ex cur -n 1 -b */
+  sparclet_cmds.setmem.cmdb =     "ex %x -b\r%x\rq\r";	/* setmem.cmdb (addr, value) */
+  sparclet_cmds.setmem.cmdw =     "ex %x -s\r%x\rq\r";	/* setmem.cmdw (addr, value) */
+  sparclet_cmds.setmem.cmdl =     "ex %x -l\r%x\rq\r";  /* setmem.cmdl (addr, value) */
+  sparclet_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  sparclet_cmds.setmem.resp_delim =     NULL; /*": " */	/* setmem.resp_delim */
+  sparclet_cmds.setmem.term =     NULL; /*"? " */	/* setmem.term */
+  sparclet_cmds.setmem.term_cmd =     NULL; /*"q\r" */	/* setmem.term_cmd */
+  /* since the parsing of multiple bytes is difficult due to
+     interspersed addresses, we'll only read 1 value at a time,
+     even tho these can handle a count */
+  /* we can use -n to set count to read, but may have to parse? */
+  sparclet_cmds.getmem.cmdb =     "ex %x -n 1 -b\r";	/* getmem.cmdb (addr, #bytes) */
+  sparclet_cmds.getmem.cmdw =     "ex %x -n 1 -s\r";	/* getmem.cmdw (addr, #swords) */
+  sparclet_cmds.getmem.cmdl =     "ex %x -n 1 -l\r";	/* getmem.cmdl (addr, #words) */
+  sparclet_cmds.getmem.cmdll =     NULL;		/* getmem.cmdll (addr, #dwords) */
+  sparclet_cmds.getmem.resp_delim =     ": ";		/* getmem.resp_delim */
+  sparclet_cmds.getmem.term =     NULL;			/* getmem.term */
+  sparclet_cmds.getmem.term_cmd =     NULL;		/* getmem.term_cmd */
+  sparclet_cmds.setreg.cmd =     "reg %s 0x%x\r";	/* setreg.cmd (name, value) */
+  sparclet_cmds.setreg.resp_delim =     NULL;		/* setreg.resp_delim */
+  sparclet_cmds.setreg.term =     NULL;			/* setreg.term */
+  sparclet_cmds.setreg.term_cmd =  NULL ;		/* setreg.term_cmd */
+  sparclet_cmds.getreg.cmd =     "reg %s\r";		/* getreg.cmd (name) */
+  sparclet_cmds.getreg.resp_delim =     " ";		/* getreg.resp_delim */
+  sparclet_cmds.getreg.term =     NULL;			/* getreg.term */
+  sparclet_cmds.getreg.term_cmd =     NULL;		/* getreg.term_cmd */
+  sparclet_cmds.dump_registers =   "reg\r";		/* dump_registers */
+  sparclet_cmds.register_pattern =   "\\(\\w+\\)=\\([0-9a-fA-F]+\\)";	/* register_pattern */
+  sparclet_cmds.supply_register =   sparclet_supply_register;	/* supply_register */
+  sparclet_cmds.load_routine =   sparclet_load;		/* load_routine */
+  sparclet_cmds.load =   NULL;				/* download command (srecs on console) */
+  sparclet_cmds.loadresp =   NULL;			/* load response */
+  sparclet_cmds.prompt =   "monitor>";			/* monitor command prompt */
+  /* yikes!  gdb core dumps without this delimitor!! */
+  sparclet_cmds.line_term =   "\r";			/* end-of-command delimitor */
+  sparclet_cmds.cmd_end =   NULL;			/* optional command terminator */
+  sparclet_cmds.target =   &sparclet_ops;		/* target operations */
+  sparclet_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  sparclet_cmds.regnames =   sparclet_regnames;		/* registers names */
+  sparclet_cmds.magic =   MONITOR_OPS_MAGIC ;	/* magic */
+};
+
+static void
+sparclet_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &sparclet_cmds, from_tty);
+}
+
+void
+_initialize_sparclet ()
+{
+  int i;
+  init_sparclet_cmds() ;
+
+  for (i = 0; i < NUM_REGS; i++)
+    if (sparclet_regnames[i][0] == 'c' ||
+	sparclet_regnames[i][0] == 'a')
+      sparclet_regnames[i] = 0;		/* mon can't report c* or a* regs */
+
+  sparclet_regnames[0] = 0;		/* mon won't report %G0 */
+
+  init_monitor_ops (&sparclet_ops);
+  sparclet_ops.to_shortname = "sparclet"; /* for the target command */
+  sparclet_ops.to_longname = "SPARC Sparclet monitor";
+  /* use SW breaks; target only supports 2 HW breakpoints */
+  sparclet_ops.to_insert_breakpoint = memory_insert_breakpoint; 
+  sparclet_ops.to_remove_breakpoint = memory_remove_breakpoint; 
+
+  sparclet_ops.to_doc = 
+    "Use a board running the Sparclet debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+
+  sparclet_ops.to_open = sparclet_open;
+  add_target (&sparclet_ops);
+}
+
diff --git a/gdb/sparclet-stub.c b/gdb/sparclet-stub.c
new file mode 100644
index 0000000..ecf670b
--- /dev/null
+++ b/gdb/sparclet-stub.c
@@ -0,0 +1,1232 @@
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED
+
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ *  Module name: remcom.c $
+ *  Revision: 1.34 $
+ *  Date: 91/03/09 12:29:49 $
+ *  Contributor:     Lake Stevens Instrument Division$
+ *
+ *  Description:     low level support for gdb debugger. $
+ *
+ *  Considerations:  only works on target hardware $
+ *
+ *  Written by:      Glenn Engel $
+ *  ModuleState:     Experimental $
+ *
+ *  NOTES:           See Below $
+ *
+ *  Modified for SPARC by Stu Grossman, Cygnus Support.
+ *  Based on sparc-stub.c, it's modified for SPARClite Debug Unit hardware
+ *  breakpoint support to create sparclite-stub.c, by Kung Hsu, Cygnus Support.
+ *
+ *  This code has been extensively tested on the Fujitsu SPARClite demo board.
+ *
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *
+ *************
+ *
+ *    The following gdb commands are supported:
+ *
+ * command          function                               Return value
+ *
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ *    P             set the value of a single CPU register OK or P01 (???)
+ *
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ *
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ *
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ *
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ *
+ *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
+ *							   baud rate
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum.  A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+#include <string.h>
+#include <signal.h>
+
+/************************************************************************
+ *
+ * external low-level support routines
+ */
+
+extern void putDebugChar();	/* write a single character      */
+extern int getDebugChar();	/* read and return a single char */
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 2048
+
+static int initialized = 0;	/* !0 means we've been initialized */
+static int remote_debug = 0;	/* turn on verbose debugging */
+
+extern void breakinst();
+void _cprint();
+static void hw_breakpoint();
+static void set_mem_fault_trap();
+static void get_in_break_mode();
+static unsigned char *mem2hex();
+
+static const char hexchars[]="0123456789abcdef";
+
+#define NUMREGS 121
+
+static unsigned long saved_stack_pointer;
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES (NUMREGS * 4)
+enum regnames { G0, G1, G2, G3, G4, G5, G6, G7,
+		O0, O1, O2, O3, O4, O5, SP, O7,
+		L0, L1, L2, L3, L4, L5, L6, L7,
+		I0, I1, I2, I3, I4, I5, FP, I7,
+
+		F0, F1, F2, F3, F4, F5, F6, F7,
+		F8, F9, F10, F11, F12, F13, F14, F15,
+		F16, F17, F18, F19, F20, F21, F22, F23,
+		F24, F25, F26, F27, F28, F29, F30, F31,
+
+		Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR,
+		CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR, UNUSED1,
+
+		ASR1, ASR15, ASR17, ASR18, ASR19, ASR20, ASR21, ASR22, 
+		/* the following not actually implemented */
+		AWR0,  AWR1,  AWR2,  AWR3,  AWR4,  AWR5,  AWR6,  AWR7,  
+		AWR8,  AWR9,  AWR10, AWR11, AWR12, AWR13, AWR14, AWR15,  
+		AWR16, AWR17, AWR18, AWR19, AWR20, AWR21, AWR22, AWR23,  
+		AWR24, AWR25, AWR26, AWR27, AWR28, AWR29, AWR30, AWR31,  
+		APSR
+};
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+extern void trap_low();
+
+asm("
+	.reserve trapstack, 1000 * 4, \"bss\", 8
+
+	.data
+	.align	4
+
+in_trap_handler:
+	.word	0
+
+	.text
+	.align 4
+
+! This function is called when any SPARC trap (except window overflow or
+! underflow) occurs.  It makes sure that the invalid register window is still
+! available before jumping into C code.  It will also restore the world if you
+! return from handle_exception.
+!
+! On entry, trap_low expects l1 and l2 to contain pc and npc respectivly.
+
+	.globl _trap_low
+_trap_low:
+	mov	%psr, %l0
+	mov	%wim, %l3
+
+	srl	%l3, %l0, %l4		! wim >> cwp
+	and	%l4, 0xff, %l4		! Mask off windows 28, 29
+	cmp	%l4, 1
+	bne	window_fine		! Branch if not in the invalid window
+	nop
+
+! Handle window overflow
+
+	mov	%g1, %l4		! Save g1, we use it to hold the wim
+	srl	%l3, 1, %g1		! Rotate wim right
+	and	%g1, 0xff, %g1		! Mask off windows 28, 29
+	tst	%g1
+	bg	good_wim		! Branch if new wim is non-zero
+	nop
+
+! At this point, we need to bring a 1 into the high order bit of the wim.
+! Since we don't want to make any assumptions about the number of register
+! windows, we figure it out dynamically so as to setup the wim correctly.
+
+	! The normal way doesn't work on the sparclet as register windows
+	! 28 and 29 are special purpose windows.
+	!not	%g1			! Fill g1 with ones
+	!mov	%g1, %wim		! Fill the wim with ones
+	!nop
+	!nop
+	!nop
+	!mov	%wim, %g1		! Read back the wim
+	!inc	%g1			! Now g1 has 1 just to left of wim
+	!srl	%g1, 1, %g1		! Now put 1 at top of wim
+
+	mov	0x80, %g1		! Hack for sparclet
+
+	! This doesn't work on the sparclet.
+	!mov	%g0, %wim		! Clear wim so that subsequent save
+					!  won't trap
+	andn	%l3, 0xff, %l5		! Clear wim but not windows 28, 29
+	mov	%l5, %wim
+	nop
+	nop
+	nop
+
+good_wim:
+	save	%g0, %g0, %g0		! Slip into next window
+	mov	%g1, %wim		! Install the new wim
+
+	std	%l0, [%sp + 0 * 4]	! save L & I registers
+	std	%l2, [%sp + 2 * 4]
+	std	%l4, [%sp + 4 * 4]
+	std	%l6, [%sp + 6 * 4]
+
+	std	%i0, [%sp + 8 * 4]
+	std	%i2, [%sp + 10 * 4]
+	std	%i4, [%sp + 12 * 4]
+	std	%i6, [%sp + 14 * 4]
+
+	restore				! Go back to trap window.
+	mov	%l4, %g1		! Restore %g1
+
+window_fine:
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	tst	%l5
+	bg	recursive_trap
+	inc	%l5
+
+	set	trapstack+1000*4, %sp	! Switch to trap stack
+
+recursive_trap:
+	st	%l5, [%lo(in_trap_handler) + %l4]
+	sub	%sp,(16+1+6+1+88)*4,%sp ! Make room for input & locals
+ 					! + hidden arg + arg spill
+					! + doubleword alignment
+					! + registers[121]
+
+	std	%g0, [%sp + (24 + 0) * 4] ! registers[Gx]
+	std	%g2, [%sp + (24 + 2) * 4]
+	std	%g4, [%sp + (24 + 4) * 4]
+	std	%g6, [%sp + (24 + 6) * 4]
+
+	std	%i0, [%sp + (24 + 8) * 4] ! registers[Ox]
+	std	%i2, [%sp + (24 + 10) * 4]
+	std	%i4, [%sp + (24 + 12) * 4]
+	std	%i6, [%sp + (24 + 14) * 4]
+
+	! FP regs (sparclet doesn't have fpu)
+
+	mov	%y, %l4
+	mov	%tbr, %l5
+	st	%l4, [%sp + (24 + 64) * 4] ! Y
+	st	%l0, [%sp + (24 + 65) * 4] ! PSR
+	st	%l3, [%sp + (24 + 66) * 4] ! WIM
+	st	%l5, [%sp + (24 + 67) * 4] ! TBR
+	st	%l1, [%sp + (24 + 68) * 4] ! PC
+	st	%l2, [%sp + (24 + 69) * 4] ! NPC
+					! CPSR and FPSR not impl
+	or	%l0, 0xf20, %l4
+	mov	%l4, %psr		! Turn on traps, disable interrupts
+	nop
+        nop
+        nop
+
+! Save coprocessor state.
+! See SK/demo/hdlc_demo/ldc_swap_context.S.
+
+	mov	%psr, %l0
+	sethi	%hi(0x2000), %l5		! EC bit in PSR
+	or	%l5, %l0, %l5
+	mov	%l5, %psr			! enable coprocessor
+	nop			! 3 nops after write to %psr (needed?)
+	nop
+	nop
+	crdcxt	%ccsr, %l1			! capture CCSR
+	mov	0x6, %l2
+	cwrcxt	%l2, %ccsr	! set CCP state machine for CCFR
+	crdcxt	%ccfr, %l2			! capture CCOR
+	cwrcxt	%l2, %ccfr			! tickle  CCFR
+	crdcxt	%ccfr, %l3			! capture CCOBR
+	cwrcxt	%l3, %ccfr			! tickle  CCFR
+	crdcxt	%ccfr, %l4			! capture CCIBR
+	cwrcxt	%l4, %ccfr			! tickle  CCFR
+	crdcxt	%ccfr, %l5			! capture CCIR
+	cwrcxt	%l5, %ccfr			! tickle  CCFR
+	crdcxt	%ccpr, %l6			! capture CCPR
+	crdcxt	%cccrcr, %l7			! capture CCCRCR
+	st	%l1, [%sp + (24 + 72) * 4]	! save CCSR
+	st	%l2, [%sp + (24 + 75) * 4]	! save CCOR
+	st	%l3, [%sp + (24 + 76) * 4]	! save CCOBR
+	st	%l4, [%sp + (24 + 77) * 4]	! save CCIBR
+	st	%l5, [%sp + (24 + 78) * 4]	! save CCIR
+	st	%l6, [%sp + (24 + 73) * 4]	! save CCPR
+	st	%l7, [%sp + (24 + 74) * 4]	! save CCCRCR
+	mov	%l0, %psr 			! restore original PSR
+	nop			! 3 nops after write to %psr (needed?)
+	nop
+	nop
+
+! End of saving coprocessor state.
+! Save asr regs
+
+! Part of this is silly -- we should not display ASR15 or ASR19 at all.
+
+	sethi	%hi(0x01000000), %l6
+	st	%l6, [%sp + (24 + 81) * 4]	! ASR15 == NOP
+	sethi	%hi(0xdeadc0de), %l6
+	or	%l6, %lo(0xdeadc0de), %l6
+	st	%l6, [%sp + (24 + 84) * 4]	! ASR19 == DEADC0DE
+
+	rd	%asr1, %l4
+	st	%l4, [%sp + (24 + 80) * 4]
+!	rd	%asr15, %l4			! must not read ASR15
+!	st	%l4, [%sp + (24 + 81) * 4]	! (illegal instr trap)
+	rd	%asr17, %l4
+	st	%l4, [%sp + (24 + 82) * 4]
+	rd	%asr18, %l4
+	st	%l4, [%sp + (24 + 83) * 4]
+!	rd	%asr19, %l4			! must not read asr19
+!	st	%l4, [%sp + (24 + 84) * 4]	! (halts the CPU)
+	rd	%asr20, %l4
+	st	%l4, [%sp + (24 + 85) * 4]
+	rd	%asr21, %l4
+	st	%l4, [%sp + (24 + 86) * 4]
+	rd	%asr22, %l4
+	st	%l4, [%sp + (24 + 87) * 4]
+
+! End of saving asr regs
+
+	call	_handle_exception
+	add	%sp, 24 * 4, %o0	! Pass address of registers
+
+! Reload all of the registers that aren't on the stack
+
+	ld	[%sp + (24 + 1) * 4], %g1 ! registers[Gx]
+	ldd	[%sp + (24 + 2) * 4], %g2
+	ldd	[%sp + (24 + 4) * 4], %g4
+	ldd	[%sp + (24 + 6) * 4], %g6
+
+	ldd	[%sp + (24 + 8) * 4], %i0 ! registers[Ox]
+	ldd	[%sp + (24 + 10) * 4], %i2
+	ldd	[%sp + (24 + 12) * 4], %i4
+	ldd	[%sp + (24 + 14) * 4], %i6
+
+	! FP regs (sparclet doesn't have fpu)
+
+! Update the coprocessor registers.
+! See SK/demo/hdlc_demo/ldc_swap_context.S.
+
+	mov	%psr, %l0
+	sethi	%hi(0x2000), %l5		! EC bit in PSR
+	or	%l5, %l0, %l5
+	mov	%l5, %psr			! enable coprocessor
+	nop			! 3 nops after write to %psr (needed?)
+	nop
+	nop
+
+	mov 0x6, %l2
+	cwrcxt	%l2, %ccsr	! set CCP state machine for CCFR
+
+	ld	[%sp + (24 + 72) * 4], %l1	! saved CCSR
+	ld	[%sp + (24 + 75) * 4], %l2	! saved CCOR
+	ld	[%sp + (24 + 76) * 4], %l3	! saved CCOBR
+	ld	[%sp + (24 + 77) * 4], %l4	! saved CCIBR
+	ld	[%sp + (24 + 78) * 4], %l5	! saved CCIR
+	ld	[%sp + (24 + 73) * 4], %l6	! saved CCPR
+	ld	[%sp + (24 + 74) * 4], %l7	! saved CCCRCR
+
+	cwrcxt	%l2, %ccfr			! restore CCOR
+	cwrcxt	%l3, %ccfr			! restore CCOBR
+	cwrcxt	%l4, %ccfr			! restore CCIBR
+	cwrcxt	%l5, %ccfr			! restore CCIR
+	cwrcxt	%l6, %ccpr			! restore CCPR
+	cwrcxt	%l7, %cccrcr			! restore CCCRCR
+	cwrcxt	%l1, %ccsr			! restore CCSR
+
+	mov %l0, %psr				! restore PSR
+	nop		! 3 nops after write to %psr (needed?)
+	nop
+	nop
+
+! End of coprocessor handling stuff.
+! Update asr regs
+
+	ld	[%sp + (24 + 80) * 4], %l4
+	wr	%l4, %asr1
+!	ld	[%sp + (24 + 81) * 4], %l4	! can't write asr15
+!	wr	%l4, %asr15
+	ld	[%sp + (24 + 82) * 4], %l4
+	wr	%l4, %asr17
+	ld	[%sp + (24 + 83) * 4], %l4
+	wr	%l4, %asr18
+!	ld	[%sp + (24 + 84) * 4], %l4	! can't write asr19
+!	wr	%l4, %asr19
+!	ld	[%sp + (24 + 85) * 4], %l4	! can't write asr20
+!	wr	%l4, %asr20
+!	ld	[%sp + (24 + 86) * 4], %l4	! can't write asr21
+!	wr	%l4, %asr21
+	ld	[%sp + (24 + 87) * 4], %l4
+	wr	%l4, %asr22
+
+! End of restoring asr regs
+
+
+	ldd	[%sp + (24 + 64) * 4], %l0 ! Y & PSR
+	ldd	[%sp + (24 + 68) * 4], %l2 ! PC & NPC
+
+	restore				! Ensure that previous window is valid
+	save	%g0, %g0, %g0		!  by causing a window_underflow trap
+
+	mov	%l0, %y
+	mov	%l1, %psr		! Make sure that traps are disabled
+					! for rett
+	nop	! 3 nops after write to %psr (needed?)
+	nop
+	nop
+
+	sethi	%hi(in_trap_handler), %l4
+	ld	[%lo(in_trap_handler) + %l4], %l5
+	dec	%l5
+	st	%l5, [%lo(in_trap_handler) + %l4]
+
+	jmpl	%l2, %g0		! Restore old PC
+	rett	%l3			! Restore old nPC
+");
+
+/* Convert ch from a hex digit to an int */
+
+static int
+hex(ch)
+     unsigned char ch;
+{
+  if (ch >= 'a' && ch <= 'f')
+    return ch-'a'+10;
+  if (ch >= '0' && ch <= '9')
+    return ch-'0';
+  if (ch >= 'A' && ch <= 'F')
+    return ch-'A'+10;
+  return -1;
+}
+
+/* scan for the sequence $<data>#<checksum>     */
+
+static void
+getpacket(buffer)
+     char *buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int i;
+  int count;
+  unsigned char ch;
+
+  do
+    {
+      /* wait around for the start character, ignore all other characters */
+      while ((ch = (getDebugChar() & 0x7f)) != '$') 
+	;
+
+      checksum = 0;
+      xmitcsum = -1;
+
+      count = 0;
+
+      /* now, read until a # or end of buffer is found */
+      while (count < BUFMAX)
+	{
+	  ch = getDebugChar() & 0x7f;
+	  if (ch == '#')
+	    break;
+	  checksum = checksum + ch;
+	  buffer[count] = ch;
+	  count = count + 1;
+	}
+
+      if (count >= BUFMAX)
+	continue;
+
+      buffer[count] = 0;
+
+      if (ch == '#')
+	{
+	  xmitcsum = hex(ch = getDebugChar() & 0x7f) << 4;
+	  xmitcsum |= hex(ch = getDebugChar() & 0x7f);
+
+	  if (checksum != xmitcsum)
+	    putDebugChar('-');	/* failed checksum */
+	  else
+	    {
+	      putDebugChar('+'); /* successful transfer */
+	      /* if a sequence char is present, reply the sequence ID */
+	      if (buffer[2] == ':')
+		{
+		  putDebugChar(buffer[0]);
+		  putDebugChar(buffer[1]);
+		  /* remove sequence chars from buffer */
+		  count = strlen(buffer);
+		  for (i=3; i <= count; i++)
+		    buffer[i-3] = buffer[i];
+		}
+	    }
+	}
+    }
+  while (checksum != xmitcsum);
+}
+
+/* send the packet in buffer.  */
+
+static void
+putpacket(buffer)
+     unsigned char *buffer;
+{
+  unsigned char checksum;
+  int count;
+  unsigned char ch;
+
+  /*  $<packet info>#<checksum>. */
+  do
+    {
+      putDebugChar('$');
+      checksum = 0;
+      count = 0;
+
+      while (ch = buffer[count])
+	{
+	  putDebugChar(ch);
+	  checksum += ch;
+	  count += 1;
+	}
+
+      putDebugChar('#');
+      putDebugChar(hexchars[checksum >> 4]);
+      putDebugChar(hexchars[checksum & 0xf]);
+
+    }
+  while ((getDebugChar() & 0x7f) != '+');
+}
+
+static char remcomInBuffer[BUFMAX];
+static char remcomOutBuffer[BUFMAX];
+
+/* Indicate to caller of mem2hex or hex2mem that there has been an
+   error.  */
+static volatile int mem_err = 0;
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null), in case of mem fault,
+ * return 0.
+ * If MAY_FAULT is non-zero, then we will handle memory faults by returning
+ * a 0, else treat a fault like any other fault in the stub.
+ */
+
+static unsigned char *
+mem2hex(mem, buf, count, may_fault)
+     unsigned char *mem;
+     unsigned char *buf;
+     int count;
+     int may_fault;
+{
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  while (count-- > 0)
+    {
+      ch = *mem++;
+      if (mem_err)
+	return 0;
+      *buf++ = hexchars[ch >> 4];
+      *buf++ = hexchars[ch & 0xf];
+    }
+
+  *buf = 0;
+
+  set_mem_fault_trap(0);
+
+  return buf;
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem
+ * return a pointer to the character AFTER the last byte written */
+
+static char *
+hex2mem(buf, mem, count, may_fault)
+     unsigned char *buf;
+     unsigned char *mem;
+     int count;
+     int may_fault;
+{
+  int i;
+  unsigned char ch;
+
+  set_mem_fault_trap(may_fault);
+
+  for (i=0; i<count; i++)
+    {
+      ch = hex(*buf++) << 4;
+      ch |= hex(*buf++);
+      *mem++ = ch;
+      if (mem_err)
+	return 0;
+    }
+
+  set_mem_fault_trap(0);
+
+  return mem;
+}
+
+/* This table contains the mapping between SPARC hardware trap types, and
+   signals, which are primarily what GDB understands.  It also indicates
+   which hardware traps we need to commandeer when initializing the stub. */
+
+static struct hard_trap_info
+{
+  unsigned char tt;		/* Trap type code for SPARClite */
+  unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+  {1, SIGSEGV},			/* instruction access exception */
+  {0x3b, SIGSEGV},		/* instruction access error */
+  {2, SIGILL},			/* illegal    instruction */
+  {3, SIGILL},			/* privileged instruction */
+  {4, SIGEMT},			/* fp disabled */
+  {0x24, SIGEMT},		/* cp disabled */
+  {7, SIGBUS},			/* mem address not aligned */
+  {0x29, SIGSEGV},		/* data access exception */
+  {10, SIGEMT},			/* tag overflow */
+  {128+1, SIGTRAP},		/* ta 1 - normal breakpoint instruction */
+  {0, 0}			/* Must be last */
+};
+
+/* Set up exception handlers for tracing and breakpoints */
+
+void
+set_debug_traps()
+{
+  struct hard_trap_info *ht;
+
+  for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+    exceptionHandler(ht->tt, trap_low);
+
+  /* In case GDB is started before us, ack any packets (presumably
+     "$?#xx") sitting there.  */
+  putDebugChar ('+');
+
+  initialized = 1;
+}
+
+asm ("
+! Trap handler for memory errors.  This just sets mem_err to be non-zero.  It
+! assumes that %l1 is non-zero.  This should be safe, as it is doubtful that
+! 0 would ever contain code that could mem fault.  This routine will skip
+! past the faulting instruction after setting mem_err.
+
+	.text
+	.align 4
+
+_fltr_set_mem_err:
+	sethi %hi(_mem_err), %l0
+	st %l1, [%l0 + %lo(_mem_err)]
+	jmpl %l2, %g0
+	rett %l2+4
+");
+
+static void
+set_mem_fault_trap(enable)
+     int enable;
+{
+  extern void fltr_set_mem_err();
+  mem_err = 0;
+
+  if (enable)
+    exceptionHandler(0x29, fltr_set_mem_err);
+  else
+    exceptionHandler(0x29, trap_low);
+}
+
+asm ("
+	.text
+	.align 4
+
+_dummy_hw_breakpoint:
+	jmpl %l2, %g0
+	rett %l2+4
+	nop
+	nop
+");
+
+static void
+set_hw_breakpoint_trap(enable)
+     int enable;
+{
+  extern void dummy_hw_breakpoint();
+
+  if (enable)
+    exceptionHandler(255, dummy_hw_breakpoint);
+  else
+    exceptionHandler(255, trap_low);
+}
+
+static void
+get_in_break_mode()
+{
+#if 0
+  int x;
+  mesg("get_in_break_mode, sp = ");
+  phex(&x);
+#endif
+  set_hw_breakpoint_trap(1);
+
+  asm("
+        sethi   %hi(0xff10), %l4
+        or      %l4, %lo(0xff10), %l4
+	sta 	%g0, [%l4]0x1	
+	nop
+	nop
+	nop
+      ");
+
+  set_hw_breakpoint_trap(0);
+}
+
+/* Convert the SPARC hardware trap type code to a unix signal number. */
+
+static int
+computeSignal(tt)
+     int tt;
+{
+  struct hard_trap_info *ht;
+
+  for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+    if (ht->tt == tt)
+      return ht->signo;
+
+  return SIGHUP;		/* default for things we don't know about */
+}
+
+/*
+ * While we find nice hex chars, build an int.
+ * Return number of chars processed.
+ */
+
+static int
+hexToInt(char **ptr, int *intValue)
+{
+  int numChars = 0;
+  int hexValue;
+
+  *intValue = 0;
+
+  while (**ptr)
+    {
+      hexValue = hex(**ptr);
+      if (hexValue < 0)
+	break;
+
+      *intValue = (*intValue << 4) | hexValue;
+      numChars ++;
+
+      (*ptr)++;
+    }
+
+  return (numChars);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.  It
+ * returns 1 if you should skip the instruction at the trap address, 0
+ * otherwise.
+ */
+
+static void
+handle_exception (registers)
+     unsigned long *registers;
+{
+  int tt;			/* Trap type */
+  int sigval;
+  int addr;
+  int length;
+  char *ptr;
+  unsigned long *sp;
+  unsigned long dsr;
+
+/* First, we must force all of the windows to be spilled out */
+
+  asm("
+	! Ugh.  sparclet has broken save
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	!save %sp, -64, %sp
+	save
+	add %fp,-64,%sp
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+");
+
+  if (registers[PC] == (unsigned long)breakinst)
+    {
+      registers[PC] = registers[NPC];
+      registers[NPC] += 4;
+    }
+  sp = (unsigned long *)registers[SP];
+
+  tt = (registers[TBR] >> 4) & 0xff;
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal(tt);
+  ptr = remcomOutBuffer;
+
+  *ptr++ = 'T';
+  *ptr++ = hexchars[sigval >> 4];
+  *ptr++ = hexchars[sigval & 0xf];
+
+  *ptr++ = hexchars[PC >> 4];
+  *ptr++ = hexchars[PC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[PC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[FP >> 4];
+  *ptr++ = hexchars[FP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex(sp + 8 + 6, ptr, 4, 0); /* FP */
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[SP >> 4];
+  *ptr++ = hexchars[SP & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&sp, ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[NPC >> 4];
+  *ptr++ = hexchars[NPC & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[NPC], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = hexchars[O7 >> 4];
+  *ptr++ = hexchars[O7 & 0xf];
+  *ptr++ = ':';
+  ptr = mem2hex((char *)&registers[O7], ptr, 4, 0);
+  *ptr++ = ';';
+
+  *ptr++ = 0;
+
+  putpacket(remcomOutBuffer);
+
+  while (1)
+    {
+      remcomOutBuffer[0] = 0;
+
+      getpacket(remcomInBuffer);
+      switch (remcomInBuffer[0])
+	{
+	case '?':
+	  remcomOutBuffer[0] = 'S';
+	  remcomOutBuffer[1] = hexchars[sigval >> 4];
+	  remcomOutBuffer[2] = hexchars[sigval & 0xf];
+	  remcomOutBuffer[3] = 0;
+	  break;
+
+	case 'd':
+	  remote_debug = !(remote_debug);	/* toggle debug flag */
+	  break;
+
+	case 'g':		/* return the value of the CPU registers */
+	  {
+	    ptr = remcomOutBuffer;
+	    ptr = mem2hex((char *)registers, ptr, 16 * 4, 0); /* G & O regs */
+	    ptr = mem2hex(sp + 0, ptr, 16 * 4, 0); /* L & I regs */
+	    memset(ptr, '0', 32 * 8); /* Floating point */
+	    ptr = mem2hex((char *)&registers[Y],
+		    ptr + 32 * 4 * 2,
+		    8 * 4,
+		    0); /* Y, PSR, WIM, TBR, PC, NPC, FPSR, CPSR */
+	    ptr = mem2hex((char *)&registers[CCSR],
+		    ptr,
+		    8 * 4,
+		    0); /* CCSR, CCPR, CCCRCR, CCOR, CCOBR, CCIBR, CCIR */
+	    ptr = mem2hex((char *)&registers[ASR1],
+		    ptr,
+		    8 * 4,
+		    0); /* ASR1,ASR15,ASR17,ASR18,ASR19,ASR20,ASR21,ASR22 */
+#if 0 /* not implemented */
+	    ptr = mem2hex((char *) &registers[AWR0], 
+		    ptr, 
+		    32 * 4, 
+		    0); /* Alternate Window Registers */
+#endif
+	  }
+	  break;
+
+	case 'G':	/* set value of all the CPU registers - return OK */
+	case 'P':	/* set value of one CPU register      - return OK */
+	  {
+	    unsigned long *newsp, psr;
+
+	    psr = registers[PSR];
+
+	    ptr = &remcomInBuffer[1];
+
+	    if (remcomInBuffer[0] == 'P')	/* do a single register */
+	      {
+		int regno;
+ 
+                if (hexToInt (&ptr, &regno)
+                    && *ptr++ == '=')
+                  if (regno >= L0 && regno <= I7)
+                    hex2mem (ptr, sp + regno - L0, 4, 0);
+                  else
+                    hex2mem (ptr, (char *)&registers[regno], 4, 0);
+                else
+                  {
+                    strcpy (remcomOutBuffer, "P01");
+                    break;
+                  }
+	      }
+	    else
+	      {
+		hex2mem(ptr, (char *)registers, 16 * 4, 0); /* G & O regs */
+		hex2mem(ptr + 16 * 4 * 2, sp + 0, 16 * 4, 0); /* L & I regs */
+		hex2mem(ptr + 64 * 4 * 2, (char *)&registers[Y],
+			8 * 4, 0); /* Y,PSR,WIM,TBR,PC,NPC,FPSR,CPSR */
+		hex2mem(ptr + 72 * 4 * 2, (char *)&registers[CCSR],
+			8 * 4, 0); /* CCSR,CCPR,CCCRCR,CCOR,CCOBR,CCIBR,CCIR */
+		hex2mem(ptr + 80 * 4 * 2, (char *)&registers[ASR1],
+			8 * 4, 0); /* ASR1 ... ASR22 */
+#if 0 /* not implemented */
+		hex2mem(ptr + 88 * 4 * 2, (char *)&registers[AWR0],
+			8 * 4, 0); /* Alternate Window Registers */
+#endif
+	      }
+	    /* See if the stack pointer has moved.  If so, then copy the saved
+	       locals and ins to the new location.  This keeps the window
+	       overflow and underflow routines happy.  */
+
+	    newsp = (unsigned long *)registers[SP];
+	    if (sp != newsp)
+	      sp = memcpy(newsp, sp, 16 * 4);
+
+	    /* Don't allow CWP to be modified. */
+
+	    if (psr != registers[PSR])
+	      registers[PSR] = (psr & 0x1f) | (registers[PSR] & ~0x1f);
+
+	    strcpy(remcomOutBuffer,"OK");
+	  }
+	  break;
+
+	case 'm':	  /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+	  /* Try to read %x,%x.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length))
+	    {
+	      if (mem2hex((char *)addr, remcomOutBuffer, length, 1))
+		break;
+
+	      strcpy (remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer,"E01");
+	  break;
+
+	case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+	  /* Try to read '%x,%x:'.  */
+
+	  ptr = &remcomInBuffer[1];
+
+	  if (hexToInt(&ptr, &addr)
+	      && *ptr++ == ','
+	      && hexToInt(&ptr, &length)
+	      && *ptr++ == ':')
+	    {
+	      if (hex2mem(ptr, (char *)addr, length, 1))
+		strcpy(remcomOutBuffer, "OK");
+	      else
+		strcpy(remcomOutBuffer, "E03");
+	    }
+	  else
+	    strcpy(remcomOutBuffer, "E02");
+	  break;
+
+	case 'c':    /* cAA..AA    Continue at address AA..AA(optional) */
+	  /* try to read optional parameter, pc unchanged if no parm */
+
+	  ptr = &remcomInBuffer[1];
+	  if (hexToInt(&ptr, &addr))
+	    {
+	      registers[PC] = addr;
+	      registers[NPC] = addr + 4;
+	    }
+
+/* Need to flush the instruction cache here, as we may have deposited a
+   breakpoint, and the icache probably has no way of knowing that a data ref to
+   some location may have changed something that is in the instruction cache.
+ */
+
+	  flush_i_cache();
+	  return;
+
+	  /* kill the program */
+	case 'k' :		/* do nothing */
+	  break;
+#if 0
+	case 't':		/* Test feature */
+	  asm (" std %f30,[%sp]");
+	  break;
+#endif
+	case 'r':		/* Reset */
+	  asm ("call 0
+		nop ");
+	  break;
+
+#if 0
+Disabled until we can unscrew this properly
+
+	case 'b':	  /* bBB...  Set baud rate to BB... */
+	  {
+	    int baudrate;
+	    extern void set_timer_3();
+
+	    ptr = &remcomInBuffer[1];
+	    if (!hexToInt(&ptr, &baudrate))
+	      {
+		strcpy(remcomOutBuffer,"B01");
+		break;
+	      }
+
+	    /* Convert baud rate to uart clock divider */
+	    switch (baudrate)
+	      {
+	      case 38400:
+		baudrate = 16;
+		break;
+	      case 19200:
+		baudrate = 33;
+		break;
+	      case 9600:
+		baudrate = 65;
+		break;
+	      default:
+		strcpy(remcomOutBuffer,"B02");
+		goto x1;
+	      }
+
+	    putpacket("OK");	/* Ack before changing speed */
+	    set_timer_3(baudrate); /* Set it */
+	  }
+x1:	  break;
+#endif
+	}			/* switch */
+
+      /* reply to the request */
+      putpacket(remcomOutBuffer);
+    }
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+
+void
+breakpoint()
+{
+  if (!initialized)
+    return;
+
+  asm("	.globl _breakinst
+
+	_breakinst: ta 1
+      ");
+}
+
+static void
+hw_breakpoint()
+{
+  asm("
+      ta 127
+      ");
+}
+
+#if 0 /* experimental and never finished, left here for reference */
+static void
+splet_temp(void)
+{
+  asm("	sub	%sp,(16+1+6+1+121)*4,%sp ! Make room for input & locals
+ 					! + hidden arg + arg spill
+					! + doubleword alignment
+					! + registers[121]
+
+! Leave a trail of breadcrumbs! (save register save area for debugging)
+	mov	%sp, %l0
+	add	%l0, 24*4, %l0
+	sethi	%hi(_debug_registers), %l1
+	st	%l0, [%lo(_debug_registers) + %l1]
+
+! Save the Alternate Register Set: (not implemented yet)
+!    To save the Alternate Register set, we must:
+!    1) Save the current SP in some global location.
+!    2) Swap the register sets.
+!    3) Save the Alternate SP in the Y register
+!    4) Fetch the SP that we saved in step 1.
+!    5) Use that to save the rest of the regs (not forgetting ASP in Y)
+!    6) Restore the Alternate SP from Y
+!    7) Swap the registers back.
+
+! 1) Copy the current stack pointer to global _SAVED_STACK_POINTER:
+	sethi	%hi(_saved_stack_pointer), %l0
+	st	%sp, [%lo(_saved_stack_pointer) + %l0]
+
+! 2) Swap the register sets:
+	mov	%psr, %l1
+	sethi	%hi(0x10000), %l2
+	xor	%l1, %l2, %l1
+	mov	%l1, %psr
+	nop			! 3 nops after write to %psr (needed?)
+	nop
+	nop
+
+! 3) Save Alternate L0 in Y
+	wr	%l0, 0, %y
+
+! 4) Load former SP into alternate SP, using L0
+	sethi	%hi(_saved_stack_pointer), %l0
+	or	%lo(_saved_stack_pointer), %l0, %l0
+	swap	[%l0], %sp
+
+! 4.5) Restore alternate L0
+	rd	%y, %l0
+
+! 5) Save the Alternate Window Registers
+	st	%r0, [%sp + (24 + 88) * 4]	! AWR0
+	st	%r1, [%sp + (24 + 89) * 4]	! AWR1
+	st	%r2, [%sp + (24 + 90) * 4]	! AWR2
+	st	%r3, [%sp + (24 + 91) * 4]	! AWR3
+	st	%r4, [%sp + (24 + 92) * 4]	! AWR4
+	st	%r5, [%sp + (24 + 93) * 4]	! AWR5
+	st	%r6, [%sp + (24 + 94) * 4]	! AWR6
+	st	%r7, [%sp + (24 + 95) * 4]	! AWR7
+	st	%r8, [%sp + (24 + 96) * 4]	! AWR8
+	st	%r9, [%sp + (24 + 97) * 4]	! AWR9
+	st	%r10, [%sp + (24 + 98) * 4]	! AWR10
+	st	%r11, [%sp + (24 + 99) * 4]	! AWR11
+	st	%r12, [%sp + (24 + 100) * 4]	! AWR12
+	st	%r13, [%sp + (24 + 101) * 4]	! AWR13
+!	st	%r14, [%sp + (24 + 102) * 4]	! AWR14	(SP)
+	st	%r15, [%sp + (24 + 103) * 4]	! AWR15
+	st	%r16, [%sp + (24 + 104) * 4]	! AWR16
+	st	%r17, [%sp + (24 + 105) * 4]	! AWR17
+	st	%r18, [%sp + (24 + 106) * 4]	! AWR18
+	st	%r19, [%sp + (24 + 107) * 4]	! AWR19
+	st	%r20, [%sp + (24 + 108) * 4]	! AWR20
+	st	%r21, [%sp + (24 + 109) * 4]	! AWR21
+	st	%r22, [%sp + (24 + 110) * 4]	! AWR22
+	st	%r23, [%sp + (24 + 111) * 4]	! AWR23
+	st	%r24, [%sp + (24 + 112) * 4]	! AWR24
+	st	%r25, [%sp + (24 + 113) * 4]	! AWR25
+	st	%r26, [%sp + (24 + 114) * 4]	! AWR26
+	st	%r27, [%sp + (24 + 115) * 4]	! AWR27
+	st	%r28, [%sp + (24 + 116) * 4]	! AWR28
+	st	%r29, [%sp + (24 + 117) * 4]	! AWR29
+	st	%r30, [%sp + (24 + 118) * 4]	! AWR30
+	st	%r31, [%sp + (24 + 119) * 4]	! AWR21
+
+! Get the Alternate PSR (I hope...)
+
+	rd	%psr, %l2
+	st	%l2, [%sp + (24 + 120) * 4]	! APSR
+
+! Don't forget the alternate stack pointer
+
+	rd	%y, %l3
+	st	%l3, [%sp + (24 + 102) * 4]	! AWR14 (SP)
+
+! 6) Restore the Alternate SP (saved in Y)
+
+	rd	%y, %o6
+
+
+! 7) Swap the registers back:
+
+	mov	%psr, %l1
+	sethi	%hi(0x10000), %l2
+	xor	%l1, %l2, %l1
+	mov	%l1, %psr
+	nop			! 3 nops after write to %psr (needed?)
+	nop
+	nop
+");
+}
+
+#endif
diff --git a/gdb/srec.h b/gdb/srec.h
new file mode 100644
index 0000000..8253e03
--- /dev/null
+++ b/gdb/srec.h
@@ -0,0 +1,36 @@
+/* S-record download support for GDB, the GNU debugger.
+   Copyright 1995, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+void load_srec PARAMS ((serial_t desc, const char *file, bfd_vma load_offset,
+			int maxrecsize, int flags, int hashmark,
+			int (*waitack)(void)));
+
+/* S-record capability flags */
+
+/* Which record types are supported */
+#define SREC_2_BYTE_ADDR 0x00000001
+#define SREC_3_BYTE_ADDR 0x00000002
+#define SREC_4_BYTE_ADDR 0x00000004
+#define SREC_TERM_SHIFT 3
+
+#define SREC_ALL (SREC_2_BYTE_ADDR | SREC_3_BYTE_ADDR | SREC_4_BYTE_ADDR \
+		  | ((SREC_2_BYTE_ADDR | SREC_3_BYTE_ADDR | SREC_4_BYTE_ADDR) \
+		     << SREC_TERM_SHIFT))
+
+#define SREC_BINARY	0x00000040 /* Supports binary form of S-records */
diff --git a/gdb/stabsread.c b/gdb/stabsread.c
new file mode 100644
index 0000000..c5d31e1
--- /dev/null
+++ b/gdb/stabsread.c
@@ -0,0 +1,5207 @@
+/* Support routines for decoding "stabs" debugging information format.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Support routines for reading and decoding debugging information in
+   the "stabs" format.  This format is used with many systems that use
+   the a.out object file format, as well as some systems that use
+   COFF or ELF where the stabs data is placed in a special section.
+   Avoid placing any object file format specific code in this file. */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "bfd.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "aout/stab_gnu.h"	/* We always use GNU stabs, not native */
+#include "libaout.h"
+#include "aout/aout64.h"
+#include "gdb-stabs.h"
+#include "buildsym.h"
+#include "complaints.h"
+#include "demangle.h"
+#include "language.h"
+
+#include <ctype.h>
+
+/* Ask stabsread.h to define the vars it normally declares `extern'.  */
+#define	EXTERN	/**/
+#include "stabsread.h"		/* Our own declarations */
+#undef	EXTERN
+
+/* The routines that read and process a complete stabs for a C struct or 
+   C++ class pass lists of data member fields and lists of member function
+   fields in an instance of a field_info structure, as defined below.
+   This is part of some reorganization of low level C++ support and is
+   expected to eventually go away... (FIXME) */
+
+struct field_info
+{
+  struct nextfield
+    {
+      struct nextfield *next;
+
+      /* This is the raw visibility from the stab.  It is not checked
+	 for being one of the visibilities we recognize, so code which
+	 examines this field better be able to deal.  */
+      int visibility;
+
+      struct field field;
+    } *list;
+  struct next_fnfieldlist
+    {
+      struct next_fnfieldlist *next;
+      struct fn_fieldlist fn_fieldlist;
+    } *fnlist;
+};
+
+static void
+read_one_struct_field PARAMS ((struct field_info *, char **, char *,
+			       struct type *, struct objfile *));
+
+static char * 
+get_substring PARAMS ((char **, int));
+
+static struct type *
+dbx_alloc_type PARAMS ((int [2], struct objfile *));
+
+static long read_huge_number PARAMS ((char **, int, int *));
+
+static struct type *error_type PARAMS ((char **, struct objfile *));
+
+static void
+patch_block_stabs PARAMS ((struct pending *, struct pending_stabs *,
+			   struct objfile *));
+
+static void
+fix_common_block PARAMS ((struct symbol *, int));
+
+static int
+read_type_number PARAMS ((char **, int *));
+
+static struct type *
+read_range_type PARAMS ((char **, int [2], struct objfile *));
+
+static struct type *
+read_sun_builtin_type PARAMS ((char **, int [2], struct objfile *));
+
+static struct type *
+read_sun_floating_type PARAMS ((char **, int [2], struct objfile *));
+
+static struct type *
+read_enum_type PARAMS ((char **, struct type *, struct objfile *));
+
+static struct type *
+rs6000_builtin_type PARAMS ((int));
+
+static int
+read_member_functions PARAMS ((struct field_info *, char **, struct type *,
+			       struct objfile *));
+
+static int
+read_struct_fields PARAMS ((struct field_info *, char **, struct type *,
+			    struct objfile *));
+
+static int
+read_baseclasses PARAMS ((struct field_info *, char **, struct type *,
+			  struct objfile *));
+
+static int
+read_tilde_fields PARAMS ((struct field_info *, char **, struct type *,
+			   struct objfile *));
+
+static int
+attach_fn_fields_to_type PARAMS ((struct field_info *, struct type *));
+
+static int
+attach_fields_to_type PARAMS ((struct field_info *, struct type *,
+			       struct objfile *));
+
+static struct type *
+read_struct_type PARAMS ((char **, struct type *, struct objfile *));
+
+static struct type *
+read_array_type PARAMS ((char **, struct type *, struct objfile *));
+
+static struct type **
+read_args PARAMS ((char **, int, struct objfile *));
+
+static int
+read_cpp_abbrev PARAMS ((struct field_info *, char **, struct type *,
+			 struct objfile *));
+
+/* new functions added for cfront support */
+
+static int
+copy_cfront_struct_fields PARAMS ((struct field_info *, struct type *,
+                                   struct objfile *));
+
+static char *
+get_cfront_method_physname PARAMS ((char *));
+
+static int
+read_cfront_baseclasses PARAMS ((struct field_info *, char **, 
+				 struct type *, struct objfile *));
+
+static int
+read_cfront_static_fields PARAMS ((struct field_info *, char**,
+				   struct type *, struct objfile *));
+static int
+read_cfront_member_functions PARAMS ((struct field_info *, char **, 
+				      struct type *, struct objfile *));
+
+/* end new functions added for cfront support */
+
+static void
+add_live_range PARAMS ((struct objfile *, struct symbol *, 
+			CORE_ADDR, CORE_ADDR));
+
+static int
+resolve_live_range PARAMS ((struct objfile *, struct symbol *, char *));
+
+static int
+process_reference PARAMS ((char **string));
+
+static CORE_ADDR
+ref_search_value PARAMS ((int refnum));
+
+static int
+resolve_symbol_reference PARAMS ((struct objfile *, struct symbol *, char *));
+
+static const char vptr_name[] = { '_','v','p','t','r',CPLUS_MARKER,'\0' };
+static const char vb_name[] =   { '_','v','b',CPLUS_MARKER,'\0' };
+
+/* Define this as 1 if a pcc declaration of a char or short argument
+   gives the correct address.  Otherwise assume pcc gives the
+   address of the corresponding int, which is not the same on a
+   big-endian machine.  */
+
+#ifndef BELIEVE_PCC_PROMOTION
+#define BELIEVE_PCC_PROMOTION 0
+#endif
+
+static struct complaint invalid_cpp_abbrev_complaint =
+  {"invalid C++ abbreviation `%s'", 0, 0};
+
+static struct complaint invalid_cpp_type_complaint =
+  {"C++ abbreviated type name unknown at symtab pos %d", 0, 0};
+
+static struct complaint member_fn_complaint =
+  {"member function type missing, got '%c'", 0, 0};
+
+static struct complaint const_vol_complaint =
+  {"const/volatile indicator missing, got '%c'", 0, 0};
+
+static struct complaint error_type_complaint =
+  {"debug info mismatch between compiler and debugger", 0, 0};
+
+static struct complaint invalid_member_complaint =
+  {"invalid (minimal) member type data format at symtab pos %d.", 0, 0};
+
+static struct complaint range_type_base_complaint =
+  {"base type %d of range type is not defined", 0, 0};
+
+static struct complaint reg_value_complaint =
+  {"register number %d too large (max %d) in symbol %s", 0, 0};
+
+static struct complaint vtbl_notfound_complaint =
+  {"virtual function table pointer not found when defining class `%s'", 0, 0};
+
+static struct complaint unrecognized_cplus_name_complaint =
+  {"Unknown C++ symbol name `%s'", 0, 0};
+
+static struct complaint rs6000_builtin_complaint =
+  {"Unknown builtin type %d", 0, 0};
+
+static struct complaint unresolved_sym_chain_complaint =
+  {"%s: common block `%s' from global_sym_chain unresolved", 0, 0};
+
+static struct complaint stabs_general_complaint =
+  {"%s", 0, 0};
+
+static struct complaint lrs_general_complaint =
+  {"%s", 0, 0};
+
+/* Make a list of forward references which haven't been defined.  */
+
+static struct type **undef_types;
+static int undef_types_allocated;
+static int undef_types_length;
+static struct symbol *current_symbol = NULL;
+
+/* Check for and handle cretinous stabs symbol name continuation!  */
+#define STABS_CONTINUE(pp,objfile)				\
+  do {							\
+    if (**(pp) == '\\' || (**(pp) == '?' && (*(pp))[1] == '\0')) \
+      *(pp) = next_symbol_text (objfile);	\
+  } while (0)
+
+/* FIXME: These probably should be our own types (like rs6000_builtin_type
+   has its own types) rather than builtin_type_*.  */
+static struct type **os9k_type_vector[] = {
+	0,
+	&builtin_type_int,
+	&builtin_type_char,
+	&builtin_type_long,
+	&builtin_type_short,
+	&builtin_type_unsigned_char,
+	&builtin_type_unsigned_short,
+	&builtin_type_unsigned_long,
+	&builtin_type_unsigned_int,
+	&builtin_type_float,
+	&builtin_type_double,
+	&builtin_type_void,
+	&builtin_type_long_double
+};
+
+static void os9k_init_type_vector PARAMS ((struct type **));
+
+static void
+os9k_init_type_vector(tv)
+    struct type **tv;
+{
+  int i;
+  for (i=0; i<sizeof(os9k_type_vector)/sizeof(struct type **); i++)
+    tv[i] = (os9k_type_vector[i] == 0 ? 0 : *(os9k_type_vector[i]));
+}
+
+/* Look up a dbx type-number pair.  Return the address of the slot
+   where the type for that number-pair is stored.
+   The number-pair is in TYPENUMS.
+
+   This can be used for finding the type associated with that pair
+   or for associating a new type with the pair.  */
+
+struct type **
+dbx_lookup_type (typenums)
+     int typenums[2];
+{
+  register int filenum = typenums[0];
+  register int index = typenums[1];
+  unsigned old_len;
+  register int real_filenum;
+  register struct header_file *f;
+  int f_orig_length;
+
+  if (filenum == -1)		/* -1,-1 is for temporary types.  */
+    return 0;
+
+  if (filenum < 0 || filenum >= n_this_object_header_files)
+    {
+      static struct complaint msg = {"\
+Invalid symbol data: type number (%d,%d) out of range at symtab pos %d.",
+				0, 0};
+      complain (&msg, filenum, index, symnum);
+      goto error_return;
+    }
+
+  if (filenum == 0)
+    {
+      if (index < 0)
+	{
+	  /* Caller wants address of address of type.  We think
+	     that negative (rs6k builtin) types will never appear as
+	     "lvalues", (nor should they), so we stuff the real type
+	     pointer into a temp, and return its address.  If referenced,
+	     this will do the right thing.  */
+	  static struct type *temp_type;
+
+	  temp_type = rs6000_builtin_type(index);
+	  return &temp_type;
+	}
+
+      /* Type is defined outside of header files.
+	 Find it in this object file's type vector.  */
+      if (index >= type_vector_length)
+	{
+	  old_len = type_vector_length;
+	  if (old_len == 0)
+	    {
+	      type_vector_length = INITIAL_TYPE_VECTOR_LENGTH;
+	      type_vector = (struct type **)
+		xmalloc (type_vector_length * sizeof (struct type *));
+	    }
+	  while (index >= type_vector_length)
+	    {
+	      type_vector_length *= 2;
+	    }
+	  type_vector = (struct type **)
+	    xrealloc ((char *) type_vector,
+		      (type_vector_length * sizeof (struct type *)));
+	  memset (&type_vector[old_len], 0,
+		  (type_vector_length - old_len) * sizeof (struct type *));
+
+	  if (os9k_stabs)
+	    /* Deal with OS9000 fundamental types.  */
+	    os9k_init_type_vector (type_vector);
+	}
+      return (&type_vector[index]);
+    }
+  else
+    {
+      real_filenum = this_object_header_files[filenum];
+
+      if (real_filenum >= N_HEADER_FILES (current_objfile))
+	{
+	  struct type *temp_type;
+	  struct type **temp_type_p;
+
+	  warning ("GDB internal error: bad real_filenum");
+
+	error_return:
+	  temp_type = init_type (TYPE_CODE_ERROR, 0, 0, NULL, NULL);
+	  temp_type_p = (struct type **) xmalloc (sizeof (struct type *));
+	  *temp_type_p = temp_type;
+	  return temp_type_p;
+	}
+
+      f = HEADER_FILES (current_objfile) + real_filenum;
+
+      f_orig_length = f->length;
+      if (index >= f_orig_length)
+	{
+	  while (index >= f->length)
+	    {
+	      f->length *= 2;
+	    }
+	  f->vector = (struct type **)
+	    xrealloc ((char *) f->vector, f->length * sizeof (struct type *));
+	  memset (&f->vector[f_orig_length], 0,
+		  (f->length - f_orig_length) * sizeof (struct type *));
+	}
+      return (&f->vector[index]);
+    }
+}
+
+/* Make sure there is a type allocated for type numbers TYPENUMS
+   and return the type object.
+   This can create an empty (zeroed) type object.
+   TYPENUMS may be (-1, -1) to return a new type object that is not
+   put into the type vector, and so may not be referred to by number. */
+
+static struct type *
+dbx_alloc_type (typenums, objfile)
+     int typenums[2];
+     struct objfile *objfile;
+{
+  register struct type **type_addr;
+
+  if (typenums[0] == -1)
+    {
+      return (alloc_type (objfile));
+    }
+
+  type_addr = dbx_lookup_type (typenums);
+
+  /* If we are referring to a type not known at all yet,
+     allocate an empty type for it.
+     We will fill it in later if we find out how.  */
+  if (*type_addr == 0)
+    {
+      *type_addr = alloc_type (objfile);
+    }
+
+  return (*type_addr);
+}
+
+/* for all the stabs in a given stab vector, build appropriate types 
+   and fix their symbols in given symbol vector. */
+
+static void
+patch_block_stabs (symbols, stabs, objfile)
+     struct pending *symbols;
+     struct pending_stabs *stabs;
+     struct objfile *objfile;
+{
+  int ii;
+  char *name;
+  char *pp;
+  struct symbol *sym;
+
+  if (stabs)
+    {
+      
+      /* for all the stab entries, find their corresponding symbols and 
+	 patch their types! */
+      
+      for (ii = 0; ii < stabs->count; ++ii)
+	{
+	  name = stabs->stab[ii];
+	  pp = (char*) strchr (name, ':');
+	  while (pp[1] == ':')
+	    {
+	       pp += 2;
+	       pp = (char *)strchr(pp, ':');
+	    }
+	  sym = find_symbol_in_list (symbols, name, pp-name);
+	  if (!sym)
+	    {
+	      /* FIXME-maybe: it would be nice if we noticed whether
+		 the variable was defined *anywhere*, not just whether
+		 it is defined in this compilation unit.  But neither
+		 xlc or GCC seem to need such a definition, and until
+		 we do psymtabs (so that the minimal symbols from all
+		 compilation units are available now), I'm not sure
+		 how to get the information.  */
+
+	      /* On xcoff, if a global is defined and never referenced,
+		 ld will remove it from the executable.  There is then
+		 a N_GSYM stab for it, but no regular (C_EXT) symbol.  */
+	      sym = (struct symbol *)
+		obstack_alloc (&objfile->symbol_obstack,
+			       sizeof (struct symbol));
+
+	      memset (sym, 0, sizeof (struct symbol));
+	      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	      SYMBOL_CLASS (sym) = LOC_OPTIMIZED_OUT;
+	      SYMBOL_NAME (sym) =
+		obsavestring (name, pp - name, &objfile->symbol_obstack);
+	      pp += 2;
+	      if (*(pp-1) == 'F' || *(pp-1) == 'f')
+		{
+		  /* I don't think the linker does this with functions,
+		     so as far as I know this is never executed.
+		     But it doesn't hurt to check.  */
+		  SYMBOL_TYPE (sym) =
+		    lookup_function_type (read_type (&pp, objfile));
+		}
+	      else
+		{
+		  SYMBOL_TYPE (sym) = read_type (&pp, objfile);
+		}
+	      add_symbol_to_list (sym, &global_symbols);
+	    }
+	  else
+	    {
+	      pp += 2;
+	      if (*(pp-1) == 'F' || *(pp-1) == 'f')
+		{
+		  SYMBOL_TYPE (sym) =
+		    lookup_function_type (read_type (&pp, objfile));
+		}
+	      else
+		{
+		  SYMBOL_TYPE (sym) = read_type (&pp, objfile);
+		}
+	    }
+	}
+    }
+}
+
+
+/* Read a number by which a type is referred to in dbx data,
+   or perhaps read a pair (FILENUM, TYPENUM) in parentheses.
+   Just a single number N is equivalent to (0,N).
+   Return the two numbers by storing them in the vector TYPENUMS.
+   TYPENUMS will then be used as an argument to dbx_lookup_type.
+
+   Returns 0 for success, -1 for error.  */
+
+static int
+read_type_number (pp, typenums)
+     register char **pp;
+     register int *typenums;
+{
+  int nbits;
+  if (**pp == '(')
+    {
+      (*pp)++;
+      typenums[0] = read_huge_number (pp, ',', &nbits);
+      if (nbits != 0) return -1;
+      typenums[1] = read_huge_number (pp, ')', &nbits);
+      if (nbits != 0) return -1;
+    }
+  else
+    {
+      typenums[0] = 0;
+      typenums[1] = read_huge_number (pp, 0, &nbits);
+      if (nbits != 0) return -1;
+    }
+  return 0;
+}
+
+
+#if !defined (REG_STRUCT_HAS_ADDR)
+#define REG_STRUCT_HAS_ADDR(gcc_p,type) 0
+#endif
+
+#define VISIBILITY_PRIVATE	'0'	/* Stabs character for private field */
+#define VISIBILITY_PROTECTED	'1'	/* Stabs character for protected fld */
+#define VISIBILITY_PUBLIC	'2'	/* Stabs character for public field */
+#define VISIBILITY_IGNORE	'9'	/* Optimized out or zero length */
+
+#define CFRONT_VISIBILITY_PRIVATE	'2'	/* Stabs character for private field */
+#define CFRONT_VISIBILITY_PUBLIC	'1'	/* Stabs character for public field */
+
+/* This code added to support parsing of ARM/Cfront stabs strings */
+
+/* Get substring from string up to char c, advance string pointer past
+   suibstring. */
+
+static char * 
+get_substring (p, c)
+  char ** p;
+  int c;
+{
+  char *str;
+  str = *p;
+  *p = strchr (*p, c);
+  if (*p) 
+    {
+      **p = 0;
+      (*p)++;
+    }
+  else 
+    str = 0;
+  return str;
+}
+
+/* Physname gets strcat'd onto sname in order to recreate the mangled
+   name (see funtion gdb_mangle_name in gdbtypes.c).  For cfront, make
+   the physname look like that of g++ - take out the initial mangling
+   eg: for sname="a" and fname="foo__1aFPFs_i" return "FPFs_i" */
+
+static char * 
+get_cfront_method_physname (fname)
+  char *fname;
+{
+  int len = 0;
+  /* FIXME would like to make this generic for g++ too, but 
+     that is already handled in read_member_funcctions */
+  char * p = fname;
+
+  /* search ahead to find the start of the mangled suffix */
+  if (*p == '_' && *(p+1)=='_') /* compiler generated; probably a ctor/dtor */
+    p += 2;  		
+  while (p && (unsigned) ((p+1) - fname) < strlen (fname) && *(p+1) != '_')
+    p = strchr (p, '_');
+  if (!(p && *p == '_' && *(p+1) == '_')) 
+    error ("Invalid mangled function name %s",fname);
+  p += 2; /* advance past '__' */
+
+  /* struct name length and name of type should come next; advance past it */
+  while (isdigit (*p))
+    {
+      len = len * 10 + (*p - '0');
+      p++;
+    }
+  p += len;
+
+  return p;
+}
+
+/* Read base classes within cfront class definition.
+   eg: A:ZcA;1@Bpub v2@Bvirpri;__ct__1AFv func__1AFv *sfunc__1AFv ;as__1A ;;
+             ^^^^^^^^^^^^^^^^^^
+
+       A:ZcA;;foopri__1AFv foopro__1AFv __ct__1AFv __ct__1AFRC1A foopub__1AFv ;;;
+             ^
+   */
+
+static int
+read_cfront_baseclasses (fip, pp, type, objfile) 
+  struct field_info *fip;
+  struct objfile *objfile;
+  char ** pp;
+  struct type *type;
+{
+  static struct complaint msg_unknown = {"\
+	 Unsupported token in stabs string %s.\n",
+		  0, 0};
+  static struct complaint msg_notfound = {"\
+	           Unable to find base type for %s.\n",
+                                0, 0};
+  int bnum = 0;
+  char * p;
+  int i;
+  struct nextfield *new;
+
+  if (**pp == ';')		/* no base classes; return */
+    {
+      ++(*pp);
+      return 1;
+    }
+
+  /* first count base classes so we can allocate space before parsing */
+  for (p = *pp; p && *p && *p != ';'; p++)
+    {
+      if (*p == ' ')
+	bnum++;
+    }
+  bnum++;	/* add one more for last one */
+
+  /* now parse the base classes until we get to the start of the methods 
+     (code extracted and munged from read_baseclasses) */
+  ALLOCATE_CPLUS_STRUCT_TYPE (type);
+  TYPE_N_BASECLASSES(type) = bnum;
+
+  /* allocate space */
+  {
+    int num_bytes = B_BYTES (TYPE_N_BASECLASSES (type));
+    char *pointer;
+
+    pointer = (char *) TYPE_ALLOC (type, num_bytes);
+    TYPE_FIELD_VIRTUAL_BITS (type) = (B_TYPE *) pointer;
+  }
+  B_CLRALL (TYPE_FIELD_VIRTUAL_BITS (type), TYPE_N_BASECLASSES (type));
+
+  for (i = 0; i < TYPE_N_BASECLASSES (type); i++)
+    {
+      new = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+      make_cleanup (free, new);
+      memset (new, 0, sizeof (struct nextfield));
+      new -> next = fip -> list;
+      fip -> list = new;
+      FIELD_BITSIZE (new->field) = 0; /* this should be an unpacked field! */
+
+      STABS_CONTINUE (pp, objfile);
+
+      /* virtual?  eg: v2@Bvir */
+      if (**pp=='v')
+        {
+          SET_TYPE_FIELD_VIRTUAL (type, i);
+          ++(*pp);
+	}
+
+      /* access?  eg: 2@Bvir */
+	/* Note: protected inheritance not supported in cfront */
+      switch (*(*pp)++)
+        {
+          case CFRONT_VISIBILITY_PRIVATE:
+            new -> visibility = VISIBILITY_PRIVATE;
+            break;
+          case CFRONT_VISIBILITY_PUBLIC:
+            new -> visibility = VISIBILITY_PUBLIC;
+            break;
+          default:
+            /* Bad visibility format.  Complain and treat it as
+               public.  */
+            {
+              static struct complaint msg = {
+                "Unknown visibility `%c' for baseclass", 0, 0};
+              complain (&msg, new -> visibility);
+              new -> visibility = VISIBILITY_PUBLIC;
+            }
+        }
+
+      /* "@" comes next - eg: @Bvir */
+      if (**pp!='@')
+        {
+          complain (&msg_unknown, *pp);
+          return 1;
+	}
+      ++(*pp);
+
+
+        /* Set the bit offset of the portion of the object corresponding 
+	   to this baseclass.  Always zero in the absence of
+           multiple inheritance.  */
+ 	/* Unable to read bit position from stabs;
+	   Assuming no multiple inheritance for now FIXME! */
+	/* We may have read this in the structure definition;
+	   now we should fixup the members to be the actual base classes */
+        FIELD_BITPOS (new->field) = 0;
+
+	/* Get the base class name and type */
+	  {
+  	    char * bname;		/* base class name */
+  	    struct symbol * bsym;	/* base class */
+	    char * p1, * p2;
+	    p1 = strchr (*pp,' ');
+	    p2 = strchr (*pp,';');
+	    if (p1<p2)
+              bname = get_substring (pp,' ');
+	    else
+              bname = get_substring (pp,';');
+            if (!bname || !*bname)
+	      {
+	        complain (&msg_unknown, *pp);
+		return 1;
+	      }
+	    /* FIXME! attach base info to type */
+	    bsym = lookup_symbol (bname, 0, STRUCT_NAMESPACE, 0, 0); /*demangled_name*/
+	    if (bsym) 
+	      {
+	        new -> field.type = SYMBOL_TYPE(bsym);
+      		new -> field.name = type_name_no_tag (new -> field.type);
+	      }
+	    else
+	      {
+	        complain (&msg_notfound, *pp);
+		return 1;
+	      }
+	  }
+
+      /* If more base classes to parse, loop again.
+         We ate the last ' ' or ';' in get_substring,
+         so on exit we will have skipped the trailing ';' */
+      /* if invalid, return 0; add code to detect  - FIXME! */
+    }
+  return 1;
+}
+
+/* read cfront member functions.
+   pp points to string starting with list of functions
+   eg: A:ZcA;1@Bpub v2@Bvirpri;__ct__1AFv func__1AFv *sfunc__1AFv ;as__1A ;;
+                               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
+       A:ZcA;;foopri__1AFv foopro__1AFv __ct__1AFv __ct__1AFRC1A foopub__1AFv ;;;
+              ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
+*/
+
+static int
+read_cfront_member_functions (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  /* This code extracted from read_member_functions 
+     so as to do the similar thing for our funcs */
+
+  int nfn_fields = 0;
+  int length = 0;
+  /* Total number of member functions defined in this class.  If the class
+     defines two `f' functions, and one `g' function, then this will have
+     the value 3.  */
+  int total_length = 0;
+  int i;
+  struct next_fnfield
+    {
+      struct next_fnfield *next;
+      struct fn_field fn_field;
+    } *sublist;
+  struct type *look_ahead_type;
+  struct next_fnfieldlist *new_fnlist;
+  struct next_fnfield *new_sublist;
+  char *main_fn_name;
+  char * fname;
+  struct symbol * ref_func = 0;
+      
+  /* Process each list until we find the end of the member functions.
+     eg: p = "__ct__1AFv foo__1AFv ;;;" */
+
+  STABS_CONTINUE (pp, objfile); 		/* handle \\ */
+
+  while (**pp != ';' && (fname = get_substring (pp, ' '), fname)) 
+    {
+      int is_static = 0;
+      int sublist_count = 0;
+      char * pname;
+      if (fname[0] == '*')      /* static member */
+        {
+          is_static=1;
+          sublist_count++;
+          fname++;
+        }
+      ref_func = lookup_symbol (fname, 0, VAR_NAMESPACE, 0, 0); /* demangled name */
+      if (!ref_func) 
+        {
+          static struct complaint msg = {"\
+      		Unable to find function symbol for %s\n",
+                                0, 0};
+	  complain (&msg, fname);
+	  continue;
+	}
+      sublist = NULL;
+      look_ahead_type = NULL;
+      length = 0;
+          
+      new_fnlist = (struct next_fnfieldlist *)
+      xmalloc (sizeof (struct next_fnfieldlist));
+      make_cleanup (free, new_fnlist);
+      memset (new_fnlist, 0, sizeof (struct next_fnfieldlist));
+          
+      /* The following is code to work around cfront generated stabs.
+         The stabs contains full mangled name for each field.
+         We try to demangle the name and extract the field name out of it.  */
+      {
+        char *dem, *dem_p, *dem_args;
+        int dem_len;
+        dem = cplus_demangle (fname, DMGL_ANSI | DMGL_PARAMS);
+        if (dem != NULL)
+          {
+            dem_p = strrchr (dem, ':');
+            if (dem_p != 0 && *(dem_p-1) == ':')
+              dem_p++;
+	    /* get rid of args */
+            dem_args = strchr (dem_p, '(');
+	    if (dem_args == NULL)
+	      dem_len = strlen (dem_p);
+	    else
+      	      dem_len = dem_args - dem_p;
+            main_fn_name =
+                   obsavestring (dem_p, dem_len, &objfile -> type_obstack);
+          }
+        else
+          {
+            main_fn_name =
+                   obsavestring (fname, strlen (fname), &objfile -> type_obstack);
+          }
+      } /* end of code for cfront work around */
+
+    new_fnlist -> fn_fieldlist.name = main_fn_name;
+      
+    /*-------------------------------------------------*/
+    /* Set up the sublists
+       Sublists are stuff like args, static, visibility, etc.
+       so in ARM, we have to set that info some other way.
+       Multiple sublists happen if overloading
+       eg: foo::26=##1;:;2A.;
+       In g++, we'd loop here thru all the sublists...  */
+
+    new_sublist =
+    	(struct next_fnfield *) xmalloc (sizeof (struct next_fnfield));
+    make_cleanup (free, new_sublist);
+    memset (new_sublist, 0, sizeof (struct next_fnfield));
+	  
+    /* eat 1; from :;2A.; */
+    new_sublist -> fn_field.type = SYMBOL_TYPE(ref_func); /* normally takes a read_type */
+    /* Make this type look like a method stub for gdb */
+    TYPE_FLAGS (new_sublist -> fn_field.type) |= TYPE_FLAG_STUB;
+    TYPE_CODE (new_sublist -> fn_field.type) = TYPE_CODE_METHOD;
+
+    /* If this is just a stub, then we don't have the real name here. */
+    if (TYPE_FLAGS (new_sublist -> fn_field.type) & TYPE_FLAG_STUB)
+      {
+        if (!TYPE_DOMAIN_TYPE (new_sublist -> fn_field.type))
+        TYPE_DOMAIN_TYPE (new_sublist -> fn_field.type) = type;
+        new_sublist -> fn_field.is_stub = 1;
+      }
+
+    /* physname used later in mangling; eg PFs_i,5 for foo__1aFPFs_i 
+       physname gets strcat'd in order to recreate the onto mangled name */
+    pname = get_cfront_method_physname (fname);
+    new_sublist -> fn_field.physname = savestring (pname, strlen (pname));
+      
+
+    /* Set this member function's visibility fields. 
+       Unable to distinguish access from stabs definition!
+         Assuming public for now.  FIXME!
+	 (for private, set new_sublist->fn_field.is_private = 1,
+	 for public, set new_sublist->fn_field.is_protected = 1) */
+       
+    /* Unable to distinguish const/volatile from stabs definition!
+       Assuming normal for now.  FIXME! */
+
+    new_sublist -> fn_field.is_const = 0;
+    new_sublist -> fn_field.is_volatile = 0;	/* volatile not implemented in cfront */
+	  
+    /* Set virtual/static function info
+       How to get vtable offsets ? 
+       Assuming normal for now FIXME!! 
+       For vtables, figure out from whence this virtual function came.
+       It may belong to virtual function table of
+       one of its baseclasses.
+	 set:
+	   new_sublist -> fn_field.voffset = vtable offset,
+	   new_sublist -> fn_field.fcontext = look_ahead_type;
+	   where look_ahead_type is type of baseclass */
+    if (is_static)
+      new_sublist -> fn_field.voffset = VOFFSET_STATIC;
+    else 				/* normal member function.  */
+      new_sublist -> fn_field.voffset = 0;
+    new_sublist -> fn_field.fcontext = 0;
+ 
+
+    /* Prepare new sublist */
+    new_sublist -> next = sublist;
+    sublist = new_sublist;
+    length++;
+
+    /* In g++, we loop thu sublists - now we set from functions. */
+    new_fnlist -> fn_fieldlist.fn_fields = (struct fn_field *)
+         obstack_alloc (&objfile -> type_obstack, 
+     	       sizeof (struct fn_field) * length);
+    memset (new_fnlist -> fn_fieldlist.fn_fields, 0,
+           sizeof (struct fn_field) * length);
+    for (i = length; (i--, sublist); sublist = sublist -> next)
+      {
+        new_fnlist -> fn_fieldlist.fn_fields[i] = sublist -> fn_field;
+      }
+      
+    new_fnlist -> fn_fieldlist.length = length;
+    new_fnlist -> next = fip -> fnlist;
+    fip -> fnlist = new_fnlist;
+    nfn_fields++;
+    total_length += length;
+    STABS_CONTINUE (pp, objfile); /* handle \\ */
+  } /* end of loop */
+
+  if (nfn_fields)
+    {
+      /* type should already have space */
+      TYPE_FN_FIELDLISTS (type) = (struct fn_fieldlist *)
+      TYPE_ALLOC (type, sizeof (struct fn_fieldlist) * nfn_fields);
+      memset (TYPE_FN_FIELDLISTS (type), 0,
+         	sizeof (struct fn_fieldlist) * nfn_fields);
+      TYPE_NFN_FIELDS (type) = nfn_fields;
+      TYPE_NFN_FIELDS_TOTAL (type) = total_length;
+    }
+
+  /* end of scope for reading member func */
+
+  /* eg: ";;" */
+
+  /* Skip trailing ';' and bump count of number of fields seen */
+  if (**pp == ';')
+    (*pp)++;
+  else
+    return 0;
+  return 1;
+}
+
+/* This routine fixes up partial cfront types that were created
+   while parsing the stabs.  The main need for this function is
+   to add information such as methods to classes.
+   Examples of "p": "sA;;__ct__1AFv foo__1AFv ;;;" */
+int
+resolve_cfront_continuation (objfile, sym, p)
+  struct objfile * objfile;
+  struct symbol * sym;
+  char * p;
+{
+  struct symbol * ref_sym=0;
+  char * sname;
+  /* snarfed from read_struct_type */
+  struct field_info fi;
+  struct type *type;
+  struct cleanup *back_to;
+
+  /* Need to make sure that fi isn't gunna conflict with struct 
+     in case struct already had some fnfs */
+  fi.list = NULL;
+  fi.fnlist = NULL;       
+  back_to = make_cleanup (null_cleanup, 0);
+
+  /* We only accept structs, classes and unions at the moment. 
+     Other continuation types include t (typedef), r (long dbl), ... 
+     We may want to add support for them as well; 
+     right now they are handled by duplicating the symbol information 
+     into the type information (see define_symbol) */
+  if (*p != 's'       /* structs */
+    && *p != 'c'      /* class */
+    && *p != 'u')     /* union */
+    return 0;  /* only handle C++ types */
+  p++;  
+
+  /* Get symbol typs name and validate 
+     eg: p = "A;;__ct__1AFv foo__1AFv ;;;" */
+  sname = get_substring (&p, ';');
+  if (!sname || strcmp (sname, SYMBOL_NAME(sym)))
+    error ("Internal error: base symbol type name does not match\n");
+
+  /* Find symbol's internal gdb reference using demangled_name.
+     This is the real sym that we want; 
+     sym was a temp hack to make debugger happy */
+  ref_sym = lookup_symbol (SYMBOL_NAME(sym), 0, STRUCT_NAMESPACE, 0, 0); 
+  type = SYMBOL_TYPE(ref_sym);
+
+
+  /* Now read the baseclasses, if any, read the regular C struct or C++
+     class member fields, attach the fields to the type, read the C++
+     member functions, attach them to the type, and then read any tilde
+     field (baseclass specifier for the class holding the main vtable). */
+
+  if (!read_cfront_baseclasses (&fi, &p, type, objfile)
+      /* g++ does this next, but cfront already did this: 
+	    || !read_struct_fields (&fi, &p, type, objfile) */
+      || !copy_cfront_struct_fields (&fi, type, objfile)
+      || !read_cfront_member_functions (&fi, &p, type, objfile)
+      || !read_cfront_static_fields (&fi, &p, type, objfile)
+      || !attach_fields_to_type (&fi, type, objfile)
+      || !attach_fn_fields_to_type (&fi, type)
+      /* g++ does this next, but cfront doesn't seem to have this: 
+      		|| !read_tilde_fields (&fi, &p, type, objfile) */
+      )
+    {
+      type = error_type (&p, objfile);
+    }
+
+  do_cleanups (back_to);
+  return 0;  
+}
+/* End of code added to support parsing of ARM/Cfront stabs strings */
+
+
+/* This routine fixes up symbol references/aliases to point to the original
+   symbol definition.  Returns 0 on failure, non-zero on success.  */
+
+static int
+resolve_symbol_reference (objfile, sym, p)
+  struct objfile *objfile;
+  struct symbol *sym;
+  char *p;
+{
+  int refnum;
+  struct symbol *ref_sym=0;
+  struct alias_list *alias;
+
+  /* If this is not a symbol reference return now.  */
+  if (*p != '#')
+    return 0;  
+
+  /* Use "#<num>" as the name; we'll fix the name later.
+     We stored the original symbol name as "#<id>=<name>"
+     so we can now search for "#<id>" to resolving the reference.
+     We'll fix the names later by removing the "#<id>" or "#<id>=" */
+
+  /*---------------------------------------------------------*/
+  /* Get the reference id number, and 
+     advance p past the names so we can parse the rest. 
+       eg: id=2 for p : "2=", "2=z:r(0,1)" "2:r(0,1);l(#5,#6),l(#7,#4)" */
+  /*---------------------------------------------------------*/
+
+  /* This gets reference name from string.  sym may not have a name. */
+
+  /* Get the reference number associated with the reference id in the
+     gdb stab string.  From that reference number, get the main/primary
+     symbol for this alias.  */
+  refnum = process_reference (&p);
+  ref_sym = ref_search (refnum);
+  if (!ref_sym)
+    {
+      complain (&lrs_general_complaint, "symbol for reference not found");
+      return 0;
+    }
+
+  /* Parse the stab of the referencing symbol
+     now that we have the referenced symbol.
+     Add it as a new symbol and a link back to the referenced symbol.
+     eg: p : "=", "=z:r(0,1)" ":r(0,1);l(#5,#6),l(#7,#4)" */
+
+
+  /* If the stab symbol table and string contain:
+         RSYM   0      5      00000000 868    #15=z:r(0,1)
+         LBRAC  0      0      00000000 899    #5=
+         SLINE  0      16     00000003 923    #6=
+     Then the same symbols can be later referenced by:
+         RSYM   0      5      00000000 927    #15:r(0,1);l(#5,#6)
+     This is used in live range splitting to:
+     1) specify that a symbol (#15) is actually just a new storage 
+        class for a symbol (#15=z) which was previously defined.
+     2) specify that the beginning and ending ranges for a symbol 
+        (#15) are the values of the beginning (#5) and ending (#6) 
+        symbols. */
+       
+   /* Read number as reference id.
+      eg: p : "=", "=z:r(0,1)" ":r(0,1);l(#5,#6),l(#7,#4)" */
+   /* FIXME! Might I want to use SYMBOL_CLASS (sym) = LOC_OPTIMIZED_OUT;
+      in case of "l(0,0)"? */
+
+   /*--------------------------------------------------*/
+   /* Add this symbol to the reference list.           */
+   /*--------------------------------------------------*/
+
+  alias = (struct alias_list *) obstack_alloc (&objfile->type_obstack,
+					       sizeof (struct alias_list));
+  if (!alias)
+    {
+      complain (&lrs_general_complaint, "Unable to allocate alias list memory");
+      return 0;
+    }
+
+  alias->next = 0;
+  alias->sym = sym;
+
+  if (!SYMBOL_ALIASES (ref_sym))
+    {
+      SYMBOL_ALIASES (ref_sym) = alias;
+    }
+  else
+    {
+      struct alias_list *temp;
+
+      /* Get to the end of the list.  */
+      for (temp = SYMBOL_ALIASES (ref_sym);
+	   temp->next;
+	   temp = temp->next)
+	;
+      temp->next = alias;
+    }
+
+   /* Want to fix up name so that other functions (eg. valops)
+      will correctly print the name.
+      Don't add_symbol_to_list so that lookup_symbol won't find it.
+      nope... needed for fixups. */
+   SYMBOL_NAME (sym) = SYMBOL_NAME (ref_sym);
+
+  /* Done!  */
+  return 1;
+}
+
+/* Structure for storing pointers to reference definitions for fast lookup 
+   during "process_later". */
+
+struct ref_map
+{
+  char *stabs;
+  CORE_ADDR value;
+  struct symbol *sym;
+};
+
+#define MAX_CHUNK_REFS 100
+#define REF_CHUNK_SIZE (MAX_CHUNK_REFS * sizeof (struct ref_map))
+#define REF_MAP_SIZE(ref_chunk) ((ref_chunk) * REF_CHUNK_SIZE)
+
+static struct ref_map *ref_map;	
+
+/* Ptr to free cell in chunk's linked list. */
+static int ref_count = 0;	
+
+/* Number of chunks malloced. */
+static int ref_chunk = 0;
+
+/* Create array of pointers mapping refids to symbols and stab strings.
+   Add pointers to reference definition symbols and/or their values as we 
+   find them, using their reference numbers as our index. 
+   These will be used later when we resolve references. */
+void
+ref_add (refnum, sym, stabs, value)
+     int refnum;
+     struct symbol *sym;
+     char *stabs;
+     CORE_ADDR value;
+{
+  if (ref_count == 0)
+    ref_chunk = 0;
+  if (refnum >= ref_count)
+    ref_count = refnum + 1;
+  if (ref_count > ref_chunk * MAX_CHUNK_REFS)
+    {
+      int new_slots = ref_count - ref_chunk * MAX_CHUNK_REFS; 
+      int new_chunks = new_slots / MAX_CHUNK_REFS + 1;
+      ref_map = (struct ref_map *)
+	xrealloc (ref_map, REF_MAP_SIZE (ref_chunk + new_chunks));
+      memset (ref_map + ref_chunk * MAX_CHUNK_REFS, 0, new_chunks * REF_CHUNK_SIZE);
+      ref_chunk += new_chunks;
+    }
+  ref_map[refnum].stabs = stabs;
+  ref_map[refnum].sym = sym;
+  ref_map[refnum].value = value;
+}
+
+/* Return defined sym for the reference REFNUM.  */
+struct symbol *
+ref_search (refnum)
+     int refnum;
+{
+  if (refnum < 0 || refnum > ref_count)
+    return 0;
+  return ref_map[refnum].sym;
+}
+
+/* Return value for the reference REFNUM.  */
+
+static CORE_ADDR
+ref_search_value (refnum)
+     int refnum;
+{
+  if (refnum < 0 || refnum > ref_count)
+    return 0;
+  return ref_map[refnum].value;
+}
+   
+/* Parse a reference id in STRING and return the resulting
+   reference number.  Move STRING beyond the reference id.  */
+
+static int 
+process_reference (string)
+    char **string;
+{
+  char *p;
+  int refnum = 0;
+
+  if (**string != '#') 
+    return 0;	
+     
+  /* Advance beyond the initial '#'.  */
+  p = *string + 1;
+
+  /* Read number as reference id. */
+  while (*p && isdigit (*p))
+    {
+      refnum = refnum * 10 + *p - '0';
+      p++;
+    }
+  *string = p;
+  return refnum;
+}
+
+/* If STRING defines a reference, store away a pointer to the reference 
+   definition for later use.  Return the reference number.  */
+
+int
+symbol_reference_defined (string)
+     char **string;
+{
+  char *p = *string;
+  int refnum = 0;
+
+  refnum = process_reference (&p);
+
+  /* Defining symbols end in '=' */
+  if (*p == '=') 
+    {
+      /* Symbol is being defined here. */ 
+      *string = p + 1;
+      return refnum;
+    }
+  else
+    {
+      /* Must be a reference.   Either the symbol has already been defined,
+         or this is a forward reference to it.  */
+      *string = p;
+      return -1;
+    }
+}
+
+/* ARGSUSED */
+struct symbol *
+define_symbol (valu, string, desc, type, objfile)
+     CORE_ADDR valu;
+     char *string;
+     int desc;
+     int type;
+     struct objfile *objfile;
+{
+  register struct symbol *sym;
+  char *p = (char *) strchr (string, ':');
+  int deftype;
+  int synonym = 0;
+  register int i;
+
+  /* We would like to eliminate nameless symbols, but keep their types.
+     E.g. stab entry ":t10=*2" should produce a type 10, which is a pointer
+     to type 2, but, should not create a symbol to address that type. Since
+     the symbol will be nameless, there is no way any user can refer to it. */
+
+  int nameless;
+
+  /* Ignore syms with empty names.  */
+  if (string[0] == 0)
+    return 0;
+
+  /* Ignore old-style symbols from cc -go  */
+  if (p == 0)
+    return 0;
+
+  while (p[1] == ':')
+    {
+       p += 2;
+       p = strchr (p, ':');
+    }
+
+  /* If a nameless stab entry, all we need is the type, not the symbol.
+     e.g. ":t10=*2" or a nameless enum like " :T16=ered:0,green:1,blue:2,;" */
+  nameless = (p == string || ((string[0] == ' ') && (string[1] == ':')));
+
+  current_symbol = sym = (struct symbol *) 
+    obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
+  memset (sym, 0, sizeof (struct symbol));
+
+  switch (type & N_TYPE)
+    {
+    case N_TEXT:
+      SYMBOL_SECTION(sym) = SECT_OFF_TEXT;
+      break;
+    case N_DATA:
+      SYMBOL_SECTION(sym) = SECT_OFF_DATA;
+      break;
+    case N_BSS:
+      SYMBOL_SECTION(sym) = SECT_OFF_BSS;
+      break;
+    }
+
+  if (processing_gcc_compilation)
+    {
+      /* GCC 2.x puts the line number in desc.  SunOS apparently puts in the
+	 number of bytes occupied by a type or object, which we ignore.  */
+      SYMBOL_LINE(sym) = desc;
+    }
+  else
+    {
+      SYMBOL_LINE(sym) = 0;			/* unknown */
+    }
+
+  if (is_cplus_marker (string[0]))
+    {
+      /* Special GNU C++ names.  */
+      switch (string[1])
+	{
+	  case 't':
+	    SYMBOL_NAME (sym) = obsavestring ("this", strlen ("this"),
+					      &objfile -> symbol_obstack);
+	    break;
+
+	  case 'v': /* $vtbl_ptr_type */
+	    /* Was: SYMBOL_NAME (sym) = "vptr"; */
+	    goto normal;
+
+	  case 'e':
+	    SYMBOL_NAME (sym) = obsavestring ("eh_throw", strlen ("eh_throw"),
+					      &objfile -> symbol_obstack);
+	    break;
+
+	  case '_':
+	    /* This was an anonymous type that was never fixed up.  */
+	    goto normal;
+
+#ifdef STATIC_TRANSFORM_NAME
+	  case 'X':
+	    /* SunPRO (3.0 at least) static variable encoding.  */
+	    goto normal;
+#endif
+
+	  default:
+	    complain (&unrecognized_cplus_name_complaint, string);
+	    goto normal;		/* Do *something* with it */
+	}
+    }
+  else if (string[0] == '#')
+    {
+      /* Special GNU C extension for referencing symbols.  */
+      char *s;
+      int refnum, nlen;
+
+      /* If STRING defines a new reference id, then add it to the
+	 reference map.  Else it must be referring to a previously
+	 defined symbol, so add it to the alias list of the previously
+	 defined symbol.  */
+      s = string;
+      refnum = symbol_reference_defined (&s);
+      if (refnum >= 0)
+	  ref_add (refnum, sym, string, SYMBOL_VALUE (sym));
+      else
+	if (!resolve_symbol_reference (objfile, sym, string))
+	  return NULL;
+
+      /* S..P contains the name of the symbol.  We need to store
+	 the correct name into SYMBOL_NAME.  */
+      nlen = p - s;
+      if (refnum >= 0)
+	{
+	  if (nlen > 0)
+	    {
+	      SYMBOL_NAME (sym) = (char *)
+		obstack_alloc (&objfile -> symbol_obstack, nlen);
+	      strncpy (SYMBOL_NAME (sym), s, nlen);
+	      SYMBOL_NAME (sym)[nlen] = '\0';
+	      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+	    }
+	  else
+	    /* FIXME! Want SYMBOL_NAME (sym) = 0;
+	       Get error if leave name 0.  So give it something. */
+	    {
+	      nlen = p - string;
+	      SYMBOL_NAME (sym)	= (char *)
+		obstack_alloc (&objfile -> symbol_obstack, nlen);
+	      strncpy (SYMBOL_NAME (sym), string, nlen);
+	      SYMBOL_NAME (sym)[nlen] = '\0';
+	      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+	    }
+	}
+      /* Advance STRING beyond the reference id.  */
+      string = s;
+    }
+  else
+    {
+    normal:
+      SYMBOL_LANGUAGE (sym) = current_subfile -> language;
+      SYMBOL_NAME (sym)	= (char *)
+	obstack_alloc (&objfile -> symbol_obstack, ((p - string) + 1));
+      /* Open-coded memcpy--saves function call time.  */
+      /* FIXME:  Does it really?  Try replacing with simple strcpy and
+	 try it on an executable with a large symbol table. */
+      /* FIXME: considering that gcc can open code memcpy anyway, I
+	 doubt it.  xoxorich. */
+      {
+	register char *p1 = string;
+	register char *p2 = SYMBOL_NAME (sym);
+	while (p1 != p)
+	  {
+	    *p2++ = *p1++;
+	  }
+	*p2++ = '\0';
+      }
+
+      /* If this symbol is from a C++ compilation, then attempt to cache the
+	 demangled form for future reference.  This is a typical time versus
+	 space tradeoff, that was decided in favor of time because it sped up
+	 C++ symbol lookups by a factor of about 20. */
+
+      SYMBOL_INIT_DEMANGLED_NAME (sym, &objfile->symbol_obstack);
+    }
+  p++;
+
+  /* Determine the type of name being defined.  */
+#if 0
+  /* Getting GDB to correctly skip the symbol on an undefined symbol
+     descriptor and not ever dump core is a very dodgy proposition if
+     we do things this way.  I say the acorn RISC machine can just
+     fix their compiler.  */
+  /* The Acorn RISC machine's compiler can put out locals that don't
+     start with "234=" or "(3,4)=", so assume anything other than the
+     deftypes we know how to handle is a local.  */
+  if (!strchr ("cfFGpPrStTvVXCR", *p))
+#else
+  if (isdigit (*p) || *p == '(' || *p == '-')
+#endif
+    deftype = 'l';
+  else
+    deftype = *p++;
+
+  switch (deftype)
+    {
+    case 'c':
+      /* c is a special case, not followed by a type-number.
+	 SYMBOL:c=iVALUE for an integer constant symbol.
+	 SYMBOL:c=rVALUE for a floating constant symbol.
+	 SYMBOL:c=eTYPE,INTVALUE for an enum constant symbol.
+	 e.g. "b:c=e6,0" for "const b = blob1"
+	 (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;").  */
+      if (*p != '=')
+	{
+	  SYMBOL_CLASS (sym) = LOC_CONST;
+	  SYMBOL_TYPE (sym) = error_type (&p, objfile);
+	  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+	  add_symbol_to_list (sym, &file_symbols);
+	  return sym;
+	}
+      ++p;
+      switch (*p++)
+	{
+	case 'r':
+	  {
+	    double d = atof (p);
+	    char *dbl_valu;
+
+	    /* FIXME-if-picky-about-floating-accuracy: Should be using
+	       target arithmetic to get the value.  real.c in GCC
+	       probably has the necessary code.  */
+
+	    /* FIXME: lookup_fundamental_type is a hack.  We should be
+	       creating a type especially for the type of float constants.
+	       Problem is, what type should it be?
+
+	       Also, what should the name of this type be?  Should we
+	       be using 'S' constants (see stabs.texinfo) instead?  */
+
+	    SYMBOL_TYPE (sym) = lookup_fundamental_type (objfile,
+							 FT_DBL_PREC_FLOAT);
+	    dbl_valu = (char *)
+	      obstack_alloc (&objfile -> symbol_obstack,
+			     TYPE_LENGTH (SYMBOL_TYPE (sym)));
+	    store_floating (dbl_valu, TYPE_LENGTH (SYMBOL_TYPE (sym)), d);
+	    SYMBOL_VALUE_BYTES (sym) = dbl_valu;
+	    SYMBOL_CLASS (sym) = LOC_CONST_BYTES;
+	  }
+	  break;
+	case 'i':
+	  {
+	    /* Defining integer constants this way is kind of silly,
+	       since 'e' constants allows the compiler to give not
+	       only the value, but the type as well.  C has at least
+	       int, long, unsigned int, and long long as constant
+	       types; other languages probably should have at least
+	       unsigned as well as signed constants.  */
+
+	    /* We just need one int constant type for all objfiles.
+	       It doesn't depend on languages or anything (arguably its
+	       name should be a language-specific name for a type of
+	       that size, but I'm inclined to say that if the compiler
+	       wants a nice name for the type, it can use 'e').  */
+	    static struct type *int_const_type;
+
+	    /* Yes, this is as long as a *host* int.  That is because we
+	       use atoi.  */
+	    if (int_const_type == NULL)
+	      int_const_type =
+		init_type (TYPE_CODE_INT,
+			   sizeof (int) * HOST_CHAR_BIT / TARGET_CHAR_BIT, 0,
+			   "integer constant",
+			   (struct objfile *)NULL);
+	    SYMBOL_TYPE (sym) = int_const_type;
+	    SYMBOL_VALUE (sym) = atoi (p);
+	    SYMBOL_CLASS (sym) = LOC_CONST;
+	  }
+	  break;
+	case 'e':
+	  /* SYMBOL:c=eTYPE,INTVALUE for a constant symbol whose value
+	     can be represented as integral.
+	     e.g. "b:c=e6,0" for "const b = blob1"
+	     (where type 6 is defined by "blobs:t6=eblob1:0,blob2:1,;").  */
+	  {
+	    SYMBOL_CLASS (sym) = LOC_CONST;
+	    SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
+	    if (*p != ',')
+	      {
+		SYMBOL_TYPE (sym) = error_type (&p, objfile);
+		break;
+	      }
+	    ++p;
+
+	    /* If the value is too big to fit in an int (perhaps because
+	       it is unsigned), or something like that, we silently get
+	       a bogus value.  The type and everything else about it is
+	       correct.  Ideally, we should be using whatever we have
+	       available for parsing unsigned and long long values,
+	       however.  */
+	    SYMBOL_VALUE (sym) = atoi (p);
+	  }
+	  break;
+	default:
+	  {
+	    SYMBOL_CLASS (sym) = LOC_CONST;
+	    SYMBOL_TYPE (sym) = error_type (&p, objfile);
+	  }
+	}
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &file_symbols);
+      return sym;
+
+    case 'C':
+      /* The name of a caught exception.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_LABEL;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_VALUE_ADDRESS (sym) = valu;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'f':
+      /* A static function definition.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &file_symbols);
+      /* fall into process_function_types.  */
+
+    process_function_types:
+      /* Function result types are described as the result type in stabs.
+	 We need to convert this to the function-returning-type-X type
+	 in GDB.  E.g. "int" is converted to "function returning int".  */
+      if (TYPE_CODE (SYMBOL_TYPE (sym)) != TYPE_CODE_FUNC)
+	SYMBOL_TYPE (sym) = lookup_function_type (SYMBOL_TYPE (sym));
+
+      /* All functions in C++ have prototypes.  */
+      if (SYMBOL_LANGUAGE (sym) == language_cplus)
+	TYPE_FLAGS (SYMBOL_TYPE (sym)) |= TYPE_FLAG_PROTOTYPED;
+
+      /* fall into process_prototype_types */
+
+    process_prototype_types:
+      /* Sun acc puts declared types of arguments here.  */
+      if (*p == ';')
+	{
+	  struct type *ftype = SYMBOL_TYPE (sym);
+	  int nsemi = 0;
+	  int nparams = 0;
+	  char *p1 = p;
+
+	  /* Obtain a worst case guess for the number of arguments
+	     by counting the semicolons.  */
+	  while (*p1)
+	    {
+	      if (*p1++ == ';')
+		nsemi++;
+	    }
+
+	  /* Allocate parameter information fields and fill them in. */
+	  TYPE_FIELDS (ftype) = (struct field *)
+	    TYPE_ALLOC (ftype, nsemi * sizeof (struct field));
+	  while (*p++ == ';')
+	    {
+	      struct type *ptype;
+
+	      /* A type number of zero indicates the start of varargs.
+         	 FIXME: GDB currently ignores vararg functions.  */
+	      if (p[0] == '0' && p[1] == '\0')
+		break;
+	      ptype = read_type (&p, objfile);
+
+	      /* The Sun compilers mark integer arguments, which should
+		 be promoted to the width of the calling conventions, with
+		 a type which references itself. This type is turned into
+		 a TYPE_CODE_VOID type by read_type, and we have to turn
+		 it back into builtin_type_int here.
+		 FIXME: Do we need a new builtin_type_promoted_int_arg ?  */
+	      if (TYPE_CODE (ptype) == TYPE_CODE_VOID)
+		ptype = builtin_type_int;
+	      TYPE_FIELD_TYPE (ftype, nparams++) = ptype;
+	    }
+	  TYPE_NFIELDS (ftype) = nparams;
+	  TYPE_FLAGS (ftype) |= TYPE_FLAG_PROTOTYPED;
+	}
+      break;
+
+    case 'F':
+      /* A global function definition.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &global_symbols);
+      goto process_function_types;
+
+    case 'G':
+      /* For a class G (global) symbol, it appears that the
+	 value is not correct.  It is necessary to search for the
+	 corresponding linker definition to find the value.
+	 These definitions appear at the end of the namelist.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      /* Don't add symbol references to global_sym_chain.
+	 Symbol references don't have valid names and wont't match up with
+	 minimal symbols when the global_sym_chain is relocated.
+	 We'll fixup symbol references when we fixup the defining symbol.  */
+      if (SYMBOL_NAME (sym) && SYMBOL_NAME (sym)[0] != '#')
+	{
+          i = hashname (SYMBOL_NAME (sym));
+          SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i];
+          global_sym_chain[i] = sym;
+	}
+      add_symbol_to_list (sym, &global_symbols);
+      break;
+
+      /* This case is faked by a conditional above,
+	 when there is no code letter in the dbx data.
+	 Dbx data never actually contains 'l'.  */
+    case 's':
+    case 'l':
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_LOCAL;
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'p':
+      if (*p == 'F')
+	/* pF is a two-letter code that means a function parameter in Fortran.
+	   The type-number specifies the type of the return value.
+	   Translate it into a pointer-to-function type.  */
+	{
+	  p++;
+	  SYMBOL_TYPE (sym)
+	    = lookup_pointer_type
+	      (lookup_function_type (read_type (&p, objfile)));
+	}
+      else
+	SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
+      /* Normally this is a parameter, a LOC_ARG.  On the i960, it
+	 can also be a LOC_LOCAL_ARG depending on symbol type.  */
+#ifndef DBX_PARM_SYMBOL_CLASS
+#define	DBX_PARM_SYMBOL_CLASS(type)	LOC_ARG
+#endif
+
+      SYMBOL_CLASS (sym) = DBX_PARM_SYMBOL_CLASS (type);
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+
+      if (TARGET_BYTE_ORDER != BIG_ENDIAN)
+	{
+	  /* On little-endian machines, this crud is never necessary,
+	     and, if the extra bytes contain garbage, is harmful.  */
+	  break;
+	}
+
+      /* If it's gcc-compiled, if it says `short', believe it.  */
+      if (processing_gcc_compilation || BELIEVE_PCC_PROMOTION)
+	break;
+
+#if !BELIEVE_PCC_PROMOTION
+      {
+	/* This is the signed type which arguments get promoted to.  */
+	static struct type *pcc_promotion_type;
+	/* This is the unsigned type which arguments get promoted to.  */
+	static struct type *pcc_unsigned_promotion_type;
+
+	/* Call it "int" because this is mainly C lossage.  */
+	if (pcc_promotion_type == NULL)
+	  pcc_promotion_type =
+	    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+		       0, "int", NULL);
+
+	if (pcc_unsigned_promotion_type == NULL)
+	  pcc_unsigned_promotion_type =
+	    init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+		       TYPE_FLAG_UNSIGNED, "unsigned int", NULL);
+
+#if defined(BELIEVE_PCC_PROMOTION_TYPE)
+	/* This macro is defined on machines (e.g. sparc) where
+	   we should believe the type of a PCC 'short' argument,
+	   but shouldn't believe the address (the address is
+	   the address of the corresponding int).
+	   
+	   My guess is that this correction, as opposed to changing
+	   the parameter to an 'int' (as done below, for PCC
+	   on most machines), is the right thing to do
+	   on all machines, but I don't want to risk breaking
+	   something that already works.  On most PCC machines,
+	   the sparc problem doesn't come up because the calling
+	   function has to zero the top bytes (not knowing whether
+	   the called function wants an int or a short), so there
+	   is little practical difference between an int and a short
+	   (except perhaps what happens when the GDB user types
+	   "print short_arg = 0x10000;"). 
+	   
+	   Hacked for SunOS 4.1 by gnu@cygnus.com.  In 4.1, the compiler
+	   actually produces the correct address (we don't need to fix it
+	   up).  I made this code adapt so that it will offset the symbol
+	   if it was pointing at an int-aligned location and not
+	   otherwise.  This way you can use the same gdb for 4.0.x and
+	   4.1 systems.
+	   
+	   If the parameter is shorter than an int, and is integral
+	   (e.g. char, short, or unsigned equivalent), and is claimed to
+	   be passed on an integer boundary, don't believe it!  Offset the
+	   parameter's address to the tail-end of that integer.  */
+	
+	if (TYPE_LENGTH (SYMBOL_TYPE (sym)) < TYPE_LENGTH (pcc_promotion_type)
+	    && TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_INT
+	    && 0 == SYMBOL_VALUE (sym) % TYPE_LENGTH (pcc_promotion_type))
+	  {
+	    SYMBOL_VALUE (sym) += TYPE_LENGTH (pcc_promotion_type)
+	      - TYPE_LENGTH (SYMBOL_TYPE (sym));
+	  }
+	break;
+	
+#else /* no BELIEVE_PCC_PROMOTION_TYPE.  */
+
+	/* If PCC says a parameter is a short or a char,
+	   it is really an int.  */
+	if (TYPE_LENGTH (SYMBOL_TYPE (sym)) < TYPE_LENGTH (pcc_promotion_type)
+	    && TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_INT)
+	  {
+	    SYMBOL_TYPE (sym) =
+	      TYPE_UNSIGNED (SYMBOL_TYPE (sym))
+		? pcc_unsigned_promotion_type
+		: pcc_promotion_type;
+	  }
+	break;
+
+#endif /* no BELIEVE_PCC_PROMOTION_TYPE.  */
+      }
+#endif /* !BELIEVE_PCC_PROMOTION.  */
+
+    case 'P':
+      /* acc seems to use P to declare the prototypes of functions that
+         are referenced by this file.  gdb is not prepared to deal
+         with this extra information.  FIXME, it ought to.  */
+      if (type == N_FUN)
+	{
+	  SYMBOL_TYPE (sym) = read_type (&p, objfile);
+	  goto process_prototype_types;
+	}
+      /*FALLTHROUGH*/
+
+    case 'R':
+      /* Parameter which is in a register.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_REGPARM;
+      SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (valu);
+      if (SYMBOL_VALUE (sym) >= NUM_REGS)
+	{
+	  complain (&reg_value_complaint, SYMBOL_VALUE (sym), NUM_REGS,
+		    SYMBOL_SOURCE_NAME (sym));
+	  SYMBOL_VALUE (sym) = SP_REGNUM;  /* Known safe, though useless */
+	}
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'r':
+      /* Register variable (either global or local).  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_REGISTER;
+      SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (valu);
+      if (SYMBOL_VALUE (sym) >= NUM_REGS)
+	{
+	  complain (&reg_value_complaint, SYMBOL_VALUE (sym), NUM_REGS,
+		    SYMBOL_SOURCE_NAME (sym));
+	  SYMBOL_VALUE (sym) = SP_REGNUM;  /* Known safe, though useless */
+	}
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (within_function)
+	{
+	  /* Sun cc uses a pair of symbols, one 'p' and one 'r' with the same
+	     name to represent an argument passed in a register.
+	     GCC uses 'P' for the same case.  So if we find such a symbol pair
+	     we combine it into one 'P' symbol.  For Sun cc we need to do this
+	     regardless of REG_STRUCT_HAS_ADDR, because the compiler puts out
+	     the 'p' symbol even if it never saves the argument onto the stack.
+
+	     On most machines, we want to preserve both symbols, so that
+	     we can still get information about what is going on with the
+	     stack (VAX for computing args_printed, using stack slots instead
+	     of saved registers in backtraces, etc.).
+
+	     Note that this code illegally combines
+	       main(argc) struct foo argc; { register struct foo argc; }
+	     but this case is considered pathological and causes a warning
+	     from a decent compiler.  */
+
+	  if (local_symbols
+	      && local_symbols->nsyms > 0
+#ifndef USE_REGISTER_NOT_ARG
+	      && REG_STRUCT_HAS_ADDR (processing_gcc_compilation,
+				      SYMBOL_TYPE (sym))
+	      && (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
+		  || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_UNION
+		  || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_SET
+		  || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_BITSTRING)
+#endif
+	      )
+	    {
+	      struct symbol *prev_sym;
+	      prev_sym = local_symbols->symbol[local_symbols->nsyms - 1];
+	      if ((SYMBOL_CLASS (prev_sym) == LOC_REF_ARG
+		   || SYMBOL_CLASS (prev_sym) == LOC_ARG)
+		  && STREQ (SYMBOL_NAME (prev_sym), SYMBOL_NAME(sym)))
+		{
+		  SYMBOL_CLASS (prev_sym) = LOC_REGPARM;
+		  /* Use the type from the LOC_REGISTER; that is the type
+		     that is actually in that register.  */
+		  SYMBOL_TYPE (prev_sym) = SYMBOL_TYPE (sym);
+		  SYMBOL_VALUE (prev_sym) = SYMBOL_VALUE (sym);
+		  sym = prev_sym;
+		  break;
+		}
+	    }
+          add_symbol_to_list (sym, &local_symbols);
+	}
+      else
+        add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case 'S':
+      /* Static symbol at top level of file */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      SYMBOL_VALUE_ADDRESS (sym) = valu;
+#ifdef STATIC_TRANSFORM_NAME
+      if (IS_STATIC_TRANSFORM_NAME (SYMBOL_NAME (sym)))
+      {
+	struct minimal_symbol *msym;
+	msym = lookup_minimal_symbol (SYMBOL_NAME (sym), NULL, objfile);
+	if (msym != NULL)
+	  {
+	    SYMBOL_NAME (sym) = STATIC_TRANSFORM_NAME (SYMBOL_NAME (sym));
+	    SYMBOL_VALUE_ADDRESS (sym) = SYMBOL_VALUE_ADDRESS (msym);
+	  }
+      }
+#endif
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case 't':
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
+      /* For a nameless type, we don't want a create a symbol, thus we
+	 did not use `sym'. Return without further processing. */
+      if (nameless) return NULL;
+
+      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      /* C++ vagaries: we may have a type which is derived from
+	 a base type which did not have its name defined when the
+	 derived class was output.  We fill in the derived class's
+	 base part member's name here in that case.  */
+      if (TYPE_NAME (SYMBOL_TYPE (sym)) != NULL)
+	if ((TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_STRUCT
+	     || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_UNION)
+	    && TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)))
+	  {
+	    int j;
+	    for (j = TYPE_N_BASECLASSES (SYMBOL_TYPE (sym)) - 1; j >= 0; j--)
+	      if (TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) == 0)
+		TYPE_BASECLASS_NAME (SYMBOL_TYPE (sym), j) =
+		  type_name_no_tag (TYPE_BASECLASS (SYMBOL_TYPE (sym), j));
+	  }
+
+      if (TYPE_NAME (SYMBOL_TYPE (sym)) == NULL)
+	{
+	  /* gcc-2.6 or later (when using -fvtable-thunks)
+	     emits a unique named type for a vtable entry.
+	     Some gdb code depends on that specific name. */
+	  extern const char vtbl_ptr_name[];
+
+	  if ((TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_PTR
+	       && strcmp (SYMBOL_NAME (sym), vtbl_ptr_name))
+	      || TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_FUNC)
+	    {
+	      /* If we are giving a name to a type such as "pointer to
+		 foo" or "function returning foo", we better not set
+		 the TYPE_NAME.  If the program contains "typedef char
+		 *caddr_t;", we don't want all variables of type char
+		 * to print as caddr_t.  This is not just a
+		 consequence of GDB's type management; PCC and GCC (at
+		 least through version 2.4) both output variables of
+		 either type char * or caddr_t with the type number
+		 defined in the 't' symbol for caddr_t.  If a future
+		 compiler cleans this up it GDB is not ready for it
+		 yet, but if it becomes ready we somehow need to
+		 disable this check (without breaking the PCC/GCC2.4
+		 case).
+
+		 Sigh.
+
+		 Fortunately, this check seems not to be necessary
+		 for anything except pointers or functions.  */
+	    }
+	  else
+	    TYPE_NAME (SYMBOL_TYPE (sym)) = SYMBOL_NAME (sym);
+	}
+
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+
+    case 'T':
+      /* Struct, union, or enum tag.  For GNU C++, this can be be followed
+	 by 't' which means we are typedef'ing it as well.  */
+      synonym = *p == 't';
+
+      if (synonym)
+	p++;
+      /* The semantics of C++ state that "struct foo { ... }" also defines 
+	 a typedef for "foo".  Unfortunately, cfront never makes the typedef
+	 when translating C++ into C.  We make the typedef here so that
+	 "ptype foo" works as expected for cfront translated code.  */
+      else if (current_subfile->language == language_cplus)
+	synonym = 1;
+
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+
+      /* For a nameless type, we don't want a create a symbol, thus we
+	 did not use `sym'. Return without further processing. */
+      if (nameless) return NULL;
+
+      SYMBOL_CLASS (sym) = LOC_TYPEDEF;
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
+      if (TYPE_TAG_NAME (SYMBOL_TYPE (sym)) == 0)
+	TYPE_TAG_NAME (SYMBOL_TYPE (sym))
+	  = obconcat (&objfile -> type_obstack, "", "", SYMBOL_NAME (sym));
+      add_symbol_to_list (sym, &file_symbols);
+
+      if (synonym)
+	{
+	  /* Clone the sym and then modify it. */
+	  register struct symbol *typedef_sym = (struct symbol *)
+	    obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
+	  *typedef_sym = *sym;
+	  SYMBOL_CLASS (typedef_sym) = LOC_TYPEDEF;
+	  SYMBOL_VALUE (typedef_sym) = valu;
+	  SYMBOL_NAMESPACE (typedef_sym) = VAR_NAMESPACE;
+	  if (TYPE_NAME (SYMBOL_TYPE (sym)) == 0)
+	    TYPE_NAME (SYMBOL_TYPE (sym))
+	      = obconcat (&objfile -> type_obstack, "", "", SYMBOL_NAME (sym));
+	  add_symbol_to_list (typedef_sym, &file_symbols);
+	}
+      break;
+
+    case 'V':
+      /* Static symbol of local scope */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_STATIC;
+      SYMBOL_VALUE_ADDRESS (sym) = valu;
+#ifdef STATIC_TRANSFORM_NAME
+      if (IS_STATIC_TRANSFORM_NAME (SYMBOL_NAME (sym)))
+      {
+	struct minimal_symbol *msym;
+	msym = lookup_minimal_symbol (SYMBOL_NAME (sym), NULL, objfile);
+	if (msym != NULL)
+	  {
+	    SYMBOL_NAME (sym) = STATIC_TRANSFORM_NAME (SYMBOL_NAME (sym));
+	    SYMBOL_VALUE_ADDRESS (sym) = SYMBOL_VALUE_ADDRESS (msym);
+	  }
+      }
+#endif
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      if (os9k_stabs)
+	add_symbol_to_list (sym, &global_symbols);
+      else
+	add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'v':
+      /* Reference parameter */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_REF_ARG;
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'a':
+      /* Reference parameter which is in a register.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_REGPARM_ADDR;
+      SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (valu);
+      if (SYMBOL_VALUE (sym) >= NUM_REGS)
+	{
+	  complain (&reg_value_complaint, SYMBOL_VALUE (sym), NUM_REGS,
+		    SYMBOL_SOURCE_NAME (sym));
+	  SYMBOL_VALUE (sym) = SP_REGNUM;  /* Known safe, though useless */
+	}
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    case 'X':
+      /* This is used by Sun FORTRAN for "function result value".
+	 Sun claims ("dbx and dbxtool interfaces", 2nd ed)
+	 that Pascal uses it too, but when I tried it Pascal used
+	 "x:3" (local symbol) instead.  */
+      SYMBOL_TYPE (sym) = read_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_LOCAL;
+      SYMBOL_VALUE (sym) = valu;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &local_symbols);
+      break;
+
+    /* New code added to support cfront stabs strings.
+       Note: case 'P' already handled above */
+    case 'Z':
+      /* Cfront type continuation coming up!
+	 Find the original definition and add to it.
+	 We'll have to do this for the typedef too,
+	 since we cloned the symbol to define a type in read_type.
+	 Stabs info examples:
+		 __1C :Ztl 
+		 foo__1CFv :ZtF (first def foo__1CFv:F(0,3);(0,24))
+		 C:ZsC;;__ct__1CFv func1__1CFv func2__1CFv ... ;;;
+		 where C is the name of the class.
+	 Unfortunately, we can't lookup the original symbol yet 'cuz 
+	 we haven't finished reading all the symbols.
+	 Instead, we save it for processing later */
+      process_later (sym, p, resolve_cfront_continuation);
+      SYMBOL_TYPE (sym) = error_type (&p, objfile); /* FIXME! change later */ 
+      SYMBOL_CLASS (sym) = LOC_CONST; 
+      SYMBOL_VALUE (sym) = 0; 
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      /* Don't add to list - we'll delete it later when 
+         we add the continuation to the real sym */
+      return sym;
+      /* End of new code added to support cfront stabs strings */
+
+    default:
+      SYMBOL_TYPE (sym) = error_type (&p, objfile);
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_VALUE (sym) = 0;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      add_symbol_to_list (sym, &file_symbols);
+      break;
+    }
+
+  /* When passing structures to a function, some systems sometimes pass
+     the address in a register, not the structure itself. */
+
+  if (REG_STRUCT_HAS_ADDR (processing_gcc_compilation, SYMBOL_TYPE (sym))
+      && (SYMBOL_CLASS (sym) == LOC_REGPARM || SYMBOL_CLASS (sym) == LOC_ARG))
+    {
+      struct type *symbol_type = check_typedef (SYMBOL_TYPE (sym));
+
+      if ((TYPE_CODE (symbol_type) == TYPE_CODE_STRUCT)
+	  || (TYPE_CODE (symbol_type) == TYPE_CODE_UNION)
+	  || (TYPE_CODE (symbol_type) == TYPE_CODE_BITSTRING)
+	  || (TYPE_CODE (symbol_type) == TYPE_CODE_SET))
+	{
+	  /* If REG_STRUCT_HAS_ADDR yields non-zero we have to convert
+	     LOC_REGPARM to LOC_REGPARM_ADDR for structures and unions. */
+	  if (SYMBOL_CLASS (sym) == LOC_REGPARM)
+	    SYMBOL_CLASS (sym) = LOC_REGPARM_ADDR;
+	  /* Likewise for converting LOC_ARG to LOC_REF_ARG (for the 7th
+	     and subsequent arguments on the sparc, for example).  */
+	  else if (SYMBOL_CLASS (sym) == LOC_ARG)
+	    SYMBOL_CLASS (sym) = LOC_REF_ARG;
+	}
+    }
+
+  /* Is there more to parse?  For example LRS/alias information?  */
+  while (*p && *p == ';')
+    {
+      p++;
+      if (*p && *p == 'l')
+        {
+          /* GNU extensions for live range splitting may be appended to 
+             the end of the stab string.  eg. "l(#1,#2);l(#3,#5)" */
+
+	  /* Resolve the live range and add it to SYM's live range list.  */
+	  if (!resolve_live_range (objfile, sym, p))
+	    return NULL;
+
+	  /* Find end of live range info. */
+	  p = strchr (p, ')');
+          if (!*p || *p != ')')
+	    {
+	      complain (&lrs_general_complaint, "live range format not recognized");
+	      return NULL;
+	    }
+          p++;
+       }
+    }
+  return sym;
+}
+
+/* Add the live range found in P to the symbol SYM in objfile OBJFILE.  Returns
+   non-zero on success, zero otherwise.  */
+
+static int
+resolve_live_range (objfile, sym, p)
+     struct objfile *objfile;
+     struct symbol *sym;
+     char *p;
+{
+  int refnum;
+  CORE_ADDR start, end;
+
+  /* Sanity check the beginning of the stabs string.  */
+  if (!*p || *p != 'l')
+    {
+      complain (&lrs_general_complaint, "live range string 1");
+      return 0;
+    }
+  p++;
+
+  if (!*p || *p != '(')
+    {
+      complain (&lrs_general_complaint, "live range string 2");
+      return 0;
+    }
+  p++;
+	
+  /* Get starting value of range and advance P past the reference id.
+
+     ?!? In theory, the process_reference should never fail, but we should
+     catch that case just in case the compiler scrogged the stabs.  */
+  refnum = process_reference (&p);
+  start = ref_search_value (refnum);
+  if (!start)
+    {
+      complain (&lrs_general_complaint, "Live range symbol not found 1");
+      return 0;
+    }
+
+  if (!*p || *p != ',')
+    {
+      complain (&lrs_general_complaint, "live range string 3");
+      return 0;
+    }
+  p++;
+
+  /* Get ending value of range and advance P past the reference id.
+
+     ?!? In theory, the process_reference should never fail, but we should
+     catch that case just in case the compiler scrogged the stabs.  */
+  refnum = process_reference (&p);
+  end = ref_search_value (refnum);
+  if (!end)
+    {
+      complain (&lrs_general_complaint, "Live range symbol not found 2");
+      return 0;
+    }
+
+  if (!*p || *p != ')')
+    {
+      complain (&lrs_general_complaint, "live range string 4");
+      return 0;
+    }
+
+  /* Now that we know the bounds of the range, add it to the
+     symbol.  */
+  add_live_range (objfile, sym, start, end);
+
+  return 1;
+}
+
+/* Add a new live range defined by START and END to the symbol SYM
+   in objfile OBJFILE.  */
+
+static void
+add_live_range (objfile, sym, start, end)
+     struct objfile *objfile;
+     struct symbol *sym;
+     CORE_ADDR start, end;
+{
+  struct range_list *r, *rs;
+
+  if (start >= end)
+    {
+      complain (&lrs_general_complaint, "end of live range follows start");
+      return;
+    }
+
+  /* Alloc new live range structure. */
+  r = (struct range_list *)
+    obstack_alloc (&objfile->type_obstack, 
+		   sizeof (struct range_list));
+  r->start = start;
+  r->end = end;
+  r->next = 0;
+
+  /* Append this range to the symbol's range list. */
+  if (!SYMBOL_RANGES (sym))
+    SYMBOL_RANGES (sym) = r;
+  else
+    {
+      /* Get the last range for the symbol. */
+      for (rs = SYMBOL_RANGES (sym); rs->next; rs = rs->next)
+	;
+      rs->next = r;
+    }
+}
+
+
+/* Skip rest of this symbol and return an error type.
+
+   General notes on error recovery:  error_type always skips to the
+   end of the symbol (modulo cretinous dbx symbol name continuation).
+   Thus code like this:
+
+   if (*(*pp)++ != ';')
+     return error_type (pp, objfile);
+
+   is wrong because if *pp starts out pointing at '\0' (typically as the
+   result of an earlier error), it will be incremented to point to the
+   start of the next symbol, which might produce strange results, at least
+   if you run off the end of the string table.  Instead use
+
+   if (**pp != ';')
+     return error_type (pp, objfile);
+   ++*pp;
+
+   or
+
+   if (**pp != ';')
+     foo = error_type (pp, objfile);
+   else
+     ++*pp;
+
+   And in case it isn't obvious, the point of all this hair is so the compiler
+   can define new types and new syntaxes, and old versions of the
+   debugger will be able to read the new symbol tables.  */
+
+static struct type *
+error_type (pp, objfile)
+     char **pp;
+     struct objfile *objfile;
+{
+  complain (&error_type_complaint);
+  while (1)
+    {
+      /* Skip to end of symbol.  */
+      while (**pp != '\0')
+	{
+	  (*pp)++;
+	}
+
+      /* Check for and handle cretinous dbx symbol name continuation!  */
+      if ((*pp)[-1] == '\\' || (*pp)[-1] == '?')
+	{
+	  *pp = next_symbol_text (objfile);
+	}
+      else
+	{
+	  break;
+	}
+    }
+  return (builtin_type_error);
+}
+
+
+/* Read type information or a type definition; return the type.  Even
+   though this routine accepts either type information or a type
+   definition, the distinction is relevant--some parts of stabsread.c
+   assume that type information starts with a digit, '-', or '(' in
+   deciding whether to call read_type.  */
+
+struct type *
+read_type (pp, objfile)
+     register char **pp;
+     struct objfile *objfile;
+{
+  register struct type *type = 0;
+  struct type *type1;
+  int typenums[2];
+  char type_descriptor;
+
+  /* Size in bits of type if specified by a type attribute, or -1 if
+     there is no size attribute.  */
+  int type_size = -1;
+
+  /* Used to distinguish string and bitstring from char-array and set. */
+  int is_string = 0;
+
+  /* Read type number if present.  The type number may be omitted.
+     for instance in a two-dimensional array declared with type
+     "ar1;1;10;ar1;1;10;4".  */
+  if ((**pp >= '0' && **pp <= '9')
+      || **pp == '('
+      || **pp == '-')
+    {
+      if (read_type_number (pp, typenums) != 0)
+	return error_type (pp, objfile);
+      
+      /* Type is not being defined here.  Either it already exists,
+	 or this is a forward reference to it.  dbx_alloc_type handles
+	 both cases.  */
+      if (**pp != '=')
+	return dbx_alloc_type (typenums, objfile);
+
+      /* Type is being defined here.  */
+      /* Skip the '='.
+	 Also skip the type descriptor - we get it below with (*pp)[-1].  */
+      (*pp)+=2;
+    }
+  else
+    {
+      /* 'typenums=' not present, type is anonymous.  Read and return
+	 the definition, but don't put it in the type vector.  */
+      typenums[0] = typenums[1] = -1;
+      (*pp)++;
+    }
+
+ again:
+  type_descriptor = (*pp)[-1];
+  switch (type_descriptor)
+    {
+    case 'x':
+      {
+	enum type_code code;
+
+	/* Used to index through file_symbols.  */
+	struct pending *ppt;
+	int i;
+	
+	/* Name including "struct", etc.  */
+	char *type_name;
+	
+	{
+	  char *from, *to, *p, *q1, *q2;
+	  
+	  /* Set the type code according to the following letter.  */
+	  switch ((*pp)[0])
+	    {
+	    case 's':
+	      code = TYPE_CODE_STRUCT;
+	      break;
+	    case 'u':
+	      code = TYPE_CODE_UNION;
+	      break;
+	    case 'e':
+	      code = TYPE_CODE_ENUM;
+	      break;
+	    default:
+	      {
+		/* Complain and keep going, so compilers can invent new
+		   cross-reference types.  */
+		static struct complaint msg =
+		  {"Unrecognized cross-reference type `%c'", 0, 0};
+		complain (&msg, (*pp)[0]);
+		code = TYPE_CODE_STRUCT;
+		break;
+	      }
+	    }
+	   
+	  q1 = strchr (*pp, '<');
+	  p = strchr (*pp, ':');
+	  if (p == NULL)
+	    return error_type (pp, objfile);
+	  if (q1 && p > q1 && p[1] == ':')
+	    {
+	      int nesting_level = 0;
+	      for (q2 = q1; *q2; q2++)
+		{
+		  if (*q2 == '<')
+		    nesting_level++;
+		  else if (*q2 == '>')
+		    nesting_level--;
+		  else if (*q2 == ':' && nesting_level == 0)
+		    break;
+		}
+	      p = q2;
+	      if (*p != ':')
+		return error_type (pp, objfile);
+	    }
+	  to = type_name = 
+		(char *)obstack_alloc (&objfile->type_obstack, p - *pp + 1);
+	
+	  /* Copy the name.  */
+	  from = *pp + 1;
+	  while (from < p) 
+	    *to++ = *from++;
+	  *to = '\0';
+	  
+	  /* Set the pointer ahead of the name which we just read, and
+	     the colon.  */
+	  *pp = from + 1;
+	}
+
+	/* Now check to see whether the type has already been
+	   declared.  This was written for arrays of cross-referenced
+	   types before we had TYPE_CODE_TARGET_STUBBED, so I'm pretty
+	   sure it is not necessary anymore.  But it might be a good
+	   idea, to save a little memory.  */
+
+	for (ppt = file_symbols; ppt; ppt = ppt->next)
+	  for (i = 0; i < ppt->nsyms; i++)
+	    {
+	      struct symbol *sym = ppt->symbol[i];
+
+	      if (SYMBOL_CLASS (sym) == LOC_TYPEDEF
+		  && SYMBOL_NAMESPACE (sym) == STRUCT_NAMESPACE
+		  && (TYPE_CODE (SYMBOL_TYPE (sym)) == code)
+		  && STREQ (SYMBOL_NAME (sym), type_name))
+		{
+		  obstack_free (&objfile -> type_obstack, type_name);
+		  type = SYMBOL_TYPE (sym);
+		  return type;
+		}
+	    }
+
+	/* Didn't find the type to which this refers, so we must
+	   be dealing with a forward reference.  Allocate a type
+	   structure for it, and keep track of it so we can
+	   fill in the rest of the fields when we get the full
+	   type.  */
+	type = dbx_alloc_type (typenums, objfile);
+	TYPE_CODE (type) = code;
+	TYPE_TAG_NAME (type) = type_name;
+	INIT_CPLUS_SPECIFIC(type);
+	TYPE_FLAGS (type) |= TYPE_FLAG_STUB;
+
+	add_undefined_type (type);
+	return type;
+      }
+
+    case '-':				/* RS/6000 built-in type */
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+    case '8':
+    case '9':
+    case '(':
+      (*pp)--;
+
+      /* We deal with something like t(1,2)=(3,4)=... which
+	 the Lucid compiler and recent gcc versions (post 2.7.3) use. */
+
+      /* Allocate and enter the typedef type first.
+	 This handles recursive types. */
+      type = dbx_alloc_type (typenums, objfile);
+      TYPE_CODE (type) = TYPE_CODE_TYPEDEF;
+      { struct type *xtype = read_type (pp, objfile);
+	if (type == xtype)
+	  {
+	    /* It's being defined as itself.  That means it is "void".  */
+	    TYPE_CODE (type) = TYPE_CODE_VOID;
+	    TYPE_LENGTH (type) = 1;
+	  }
+	else if (type_size >= 0 || is_string)
+	  {
+	    *type = *xtype;
+	    TYPE_NAME (type) = NULL;
+	    TYPE_TAG_NAME (type) = NULL;
+	  }
+	else
+	  {
+	    TYPE_FLAGS (type) |= TYPE_FLAG_TARGET_STUB;
+	    TYPE_TARGET_TYPE (type) = xtype;
+	  }
+      }
+      break;
+
+    /* In the following types, we must be sure to overwrite any existing
+       type that the typenums refer to, rather than allocating a new one
+       and making the typenums point to the new one.  This is because there
+       may already be pointers to the existing type (if it had been
+       forward-referenced), and we must change it to a pointer, function,
+       reference, or whatever, *in-place*.  */
+
+    case '*':
+      type1 = read_type (pp, objfile);
+      type = make_pointer_type (type1, dbx_lookup_type (typenums));
+      break;
+
+    case '&':				/* Reference to another type */
+      type1 = read_type (pp, objfile);
+      type = make_reference_type (type1, dbx_lookup_type (typenums));
+      break;
+
+    case 'f':				/* Function returning another type */
+      if (os9k_stabs && **pp == '(')
+	{
+	  /* Function prototype; parse it.
+	     We must conditionalize this on os9k_stabs because otherwise
+	     it could be confused with a Sun-style (1,3) typenumber
+	     (I think).  */
+	  struct type *t;
+	  ++*pp;
+	  while (**pp != ')')
+            {
+              t = read_type (pp, objfile);
+              if (**pp == ',') ++*pp;
+            }
+	}
+      type1 = read_type (pp, objfile);
+      type = make_function_type (type1, dbx_lookup_type (typenums));
+      break;
+
+    case 'k':			   /* Const qualifier on some type (Sun) */
+    case 'c':			   /* Const qualifier on some type (OS9000) */
+      /* Because 'c' means other things to AIX and 'k' is perfectly good,
+	 only accept 'c' in the os9k_stabs case.  */
+      if (type_descriptor == 'c' && !os9k_stabs)
+	return error_type (pp, objfile);
+      type = read_type (pp, objfile);
+      /* FIXME! For now, we ignore const and volatile qualifiers.  */
+      break;
+
+    case 'B':			     /* Volatile qual on some type (Sun) */
+    case 'i':			     /* Volatile qual on some type (OS9000) */
+      /* Because 'i' means other things to AIX and 'B' is perfectly good,
+	 only accept 'i' in the os9k_stabs case.  */
+      if (type_descriptor == 'i' && !os9k_stabs)
+	return error_type (pp, objfile);
+      type = read_type (pp, objfile);
+      /* FIXME! For now, we ignore const and volatile qualifiers.  */
+      break;
+
+    case '@':
+      if (isdigit (**pp) || **pp ==  '(' || **pp == '-')
+	{ /* Member (class & variable) type */
+	  /* FIXME -- we should be doing smash_to_XXX types here.  */
+
+	  struct type *domain = read_type (pp, objfile);
+	  struct type *memtype;
+
+	  if (**pp != ',')
+	    /* Invalid member type data format.  */
+	    return error_type (pp, objfile);
+	  ++*pp;
+
+	  memtype = read_type (pp, objfile);
+	  type = dbx_alloc_type (typenums, objfile);
+	  smash_to_member_type (type, domain, memtype);
+	}
+      else /* type attribute */
+	{
+	  char *attr = *pp;
+	  /* Skip to the semicolon.  */
+	  while (**pp != ';' && **pp != '\0')
+	    ++(*pp);
+	  if (**pp == '\0')
+	    return error_type (pp, objfile);
+	  else
+	    ++*pp;  /* Skip the semicolon.  */
+
+	  switch (*attr)
+	    {
+	    case 's':
+	      type_size = atoi (attr + 1);
+	      if (type_size <= 0)
+		type_size = -1;
+	      break;
+
+	    case 'S':
+	      is_string = 1;
+	      break;
+
+	    default:
+	      /* Ignore unrecognized type attributes, so future compilers
+		 can invent new ones.  */
+	      break;
+	    }
+	  ++*pp;
+	  goto again;
+	}
+      break;
+
+    case '#':				/* Method (class & fn) type */
+      if ((*pp)[0] == '#')
+	{
+	  /* We'll get the parameter types from the name.  */
+	  struct type *return_type;
+
+	  (*pp)++;
+	  return_type = read_type (pp, objfile);
+	  if (*(*pp)++ != ';')
+	    complain (&invalid_member_complaint, symnum);
+	  type = allocate_stub_method (return_type);
+	  if (typenums[0] != -1)
+	    *dbx_lookup_type (typenums) = type;
+	}
+      else
+	{
+	  struct type *domain = read_type (pp, objfile);
+	  struct type *return_type;
+	  struct type **args;
+
+	  if (**pp != ',')
+	    /* Invalid member type data format.  */
+	    return error_type (pp, objfile);
+	  else
+	    ++(*pp);
+
+	  return_type = read_type (pp, objfile);
+	  args = read_args (pp, ';', objfile);
+	  type = dbx_alloc_type (typenums, objfile);
+	  smash_to_method_type (type, domain, return_type, args);
+	}
+      break;
+
+    case 'r':				/* Range type */
+      type = read_range_type (pp, typenums, objfile);
+      if (typenums[0] != -1)
+	*dbx_lookup_type (typenums) = type;
+      break;
+
+    case 'b':
+      if (os9k_stabs)
+	/* Const and volatile qualified type.  */
+	type = read_type (pp, objfile);
+      else
+	{
+	  /* Sun ACC builtin int type */
+	  type = read_sun_builtin_type (pp, typenums, objfile);
+	  if (typenums[0] != -1)
+	    *dbx_lookup_type (typenums) = type;
+	}
+      break;
+
+    case 'R':				/* Sun ACC builtin float type */
+      type = read_sun_floating_type (pp, typenums, objfile);
+      if (typenums[0] != -1)
+	*dbx_lookup_type (typenums) = type;
+      break;
+    
+    case 'e':				/* Enumeration type */
+      type = dbx_alloc_type (typenums, objfile);
+      type = read_enum_type (pp, type, objfile);
+      if (typenums[0] != -1)
+	*dbx_lookup_type (typenums) = type;
+      break;
+
+    case 's':				/* Struct type */
+    case 'u':				/* Union type */
+      type = dbx_alloc_type (typenums, objfile);
+      switch (type_descriptor)
+	{
+	  case 's':
+	    TYPE_CODE (type) = TYPE_CODE_STRUCT;
+	    break;
+	  case 'u':
+	    TYPE_CODE (type) = TYPE_CODE_UNION;
+	    break;
+	}
+      type = read_struct_type (pp, type, objfile);
+      break;
+
+    case 'a':				/* Array type */
+      if (**pp != 'r')
+	return error_type (pp, objfile);
+      ++*pp;
+      
+      type = dbx_alloc_type (typenums, objfile);
+      type = read_array_type (pp, type, objfile);
+      if (is_string)
+	TYPE_CODE (type) = TYPE_CODE_STRING;
+      break;
+
+    case 'S':
+      type1 = read_type (pp, objfile);
+      type = create_set_type ((struct type*) NULL, type1);
+      if (is_string)
+	TYPE_CODE (type) = TYPE_CODE_BITSTRING;
+      if (typenums[0] != -1)
+	*dbx_lookup_type (typenums) = type;
+      break;
+
+    default:
+      --*pp;			/* Go back to the symbol in error */
+				/* Particularly important if it was \0! */
+      return error_type (pp, objfile);
+    }
+
+  if (type == 0)
+    {
+      warning ("GDB internal error, type is NULL in stabsread.c\n");
+      return error_type (pp, objfile);
+    }
+
+  /* Size specified in a type attribute overrides any other size.  */
+  if (type_size != -1)
+    TYPE_LENGTH (type) = (type_size + TARGET_CHAR_BIT - 1) / TARGET_CHAR_BIT;
+
+  return type;
+}
+
+/* RS/6000 xlc/dbx combination uses a set of builtin types, starting from -1.
+   Return the proper type node for a given builtin type number. */
+
+static struct type *
+rs6000_builtin_type (typenum)
+     int typenum;
+{
+  /* We recognize types numbered from -NUMBER_RECOGNIZED to -1.  */
+#define NUMBER_RECOGNIZED 34
+  /* This includes an empty slot for type number -0.  */
+  static struct type *negative_types[NUMBER_RECOGNIZED + 1];
+  struct type *rettype = NULL;
+
+  if (typenum >= 0 || typenum < -NUMBER_RECOGNIZED)
+    {
+      complain (&rs6000_builtin_complaint, typenum);
+      return builtin_type_error;
+    }
+  if (negative_types[-typenum] != NULL)
+    return negative_types[-typenum];
+
+#if TARGET_CHAR_BIT != 8
+  #error This code wrong for TARGET_CHAR_BIT not 8
+  /* These definitions all assume that TARGET_CHAR_BIT is 8.  I think
+     that if that ever becomes not true, the correct fix will be to
+     make the size in the struct type to be in bits, not in units of
+     TARGET_CHAR_BIT.  */
+#endif
+
+  switch (-typenum)
+    {
+    case 1:
+      /* The size of this and all the other types are fixed, defined
+	 by the debugging format.  If there is a type called "int" which
+	 is other than 32 bits, then it should use a new negative type
+	 number (or avoid negative type numbers for that case).
+	 See stabs.texinfo.  */
+      rettype = init_type (TYPE_CODE_INT, 4, 0, "int", NULL);
+      break;
+    case 2:
+      rettype = init_type (TYPE_CODE_INT, 1, 0, "char", NULL);
+      break;
+    case 3:
+      rettype = init_type (TYPE_CODE_INT, 2, 0, "short", NULL);
+      break;
+    case 4:
+      rettype = init_type (TYPE_CODE_INT, 4, 0, "long", NULL);
+      break;
+    case 5:
+      rettype = init_type (TYPE_CODE_INT, 1, TYPE_FLAG_UNSIGNED,
+			   "unsigned char", NULL);
+      break;
+    case 6:
+      rettype = init_type (TYPE_CODE_INT, 1, 0, "signed char", NULL);
+      break;
+    case 7:
+      rettype = init_type (TYPE_CODE_INT, 2, TYPE_FLAG_UNSIGNED,
+			   "unsigned short", NULL);
+      break;
+    case 8:
+      rettype = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED,
+			   "unsigned int", NULL);
+      break;
+    case 9:
+      rettype = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED,
+			   "unsigned", NULL);
+    case 10:
+      rettype = init_type (TYPE_CODE_INT, 4, TYPE_FLAG_UNSIGNED,
+			   "unsigned long", NULL);
+      break;
+    case 11:
+      rettype = init_type (TYPE_CODE_VOID, 1, 0, "void", NULL);
+      break;
+    case 12:
+      /* IEEE single precision (32 bit).  */
+      rettype = init_type (TYPE_CODE_FLT, 4, 0, "float", NULL);
+      break;
+    case 13:
+      /* IEEE double precision (64 bit).  */
+      rettype = init_type (TYPE_CODE_FLT, 8, 0, "double", NULL);
+      break;
+    case 14:
+      /* This is an IEEE double on the RS/6000, and different machines with
+	 different sizes for "long double" should use different negative
+	 type numbers.  See stabs.texinfo.  */
+      rettype = init_type (TYPE_CODE_FLT, 8, 0, "long double", NULL);
+      break;
+    case 15:
+      rettype = init_type (TYPE_CODE_INT, 4, 0, "integer", NULL);
+      break;
+    case 16:
+      rettype = init_type (TYPE_CODE_BOOL, 4, TYPE_FLAG_UNSIGNED,
+			   "boolean", NULL);
+      break;
+    case 17:
+      rettype = init_type (TYPE_CODE_FLT, 4, 0, "short real", NULL);
+      break;
+    case 18:
+      rettype = init_type (TYPE_CODE_FLT, 8, 0, "real", NULL);
+      break;
+    case 19:
+      rettype = init_type (TYPE_CODE_ERROR, 0, 0, "stringptr", NULL);
+      break;
+    case 20:
+      rettype = init_type (TYPE_CODE_CHAR, 1, TYPE_FLAG_UNSIGNED,
+			   "character", NULL);
+      break;
+    case 21:
+      rettype = init_type (TYPE_CODE_BOOL, 1, TYPE_FLAG_UNSIGNED,
+			   "logical*1", NULL);
+      break;
+    case 22:
+      rettype = init_type (TYPE_CODE_BOOL, 2, TYPE_FLAG_UNSIGNED,
+			   "logical*2", NULL);
+      break;
+    case 23:
+      rettype = init_type (TYPE_CODE_BOOL, 4, TYPE_FLAG_UNSIGNED,
+			   "logical*4", NULL);
+      break;
+    case 24:
+      rettype = init_type (TYPE_CODE_BOOL, 4, TYPE_FLAG_UNSIGNED,
+			   "logical", NULL);
+      break;
+    case 25:
+      /* Complex type consisting of two IEEE single precision values.  */
+      rettype = init_type (TYPE_CODE_COMPLEX, 8, 0, "complex", NULL);
+      break;
+    case 26:
+      /* Complex type consisting of two IEEE double precision values.  */
+      rettype = init_type (TYPE_CODE_COMPLEX, 16, 0, "double complex", NULL);
+      break;
+    case 27:
+      rettype = init_type (TYPE_CODE_INT, 1, 0, "integer*1", NULL);
+      break;
+    case 28:
+      rettype = init_type (TYPE_CODE_INT, 2, 0, "integer*2", NULL);
+      break;
+    case 29:
+      rettype = init_type (TYPE_CODE_INT, 4, 0, "integer*4", NULL);
+      break;
+    case 30:
+      rettype = init_type (TYPE_CODE_CHAR, 2, 0, "wchar", NULL);
+      break;
+    case 31:
+      rettype = init_type (TYPE_CODE_INT, 8, 0, "long long", NULL);
+      break;
+    case 32:
+      rettype = init_type (TYPE_CODE_INT, 8, TYPE_FLAG_UNSIGNED,
+			   "unsigned long long", NULL);
+      break;
+    case 33:
+      rettype = init_type (TYPE_CODE_INT, 8, TYPE_FLAG_UNSIGNED,
+			   "logical*8", NULL);
+      break;
+    case 34:
+      rettype = init_type (TYPE_CODE_INT, 8, 0, "integer*8", NULL);
+      break;
+    }
+  negative_types[-typenum] = rettype;
+  return rettype;
+}
+
+/* This page contains subroutines of read_type.  */
+
+/* Read member function stabs info for C++ classes.  The form of each member
+   function data is:
+
+	NAME :: TYPENUM[=type definition] ARGS : PHYSNAME ;
+
+   An example with two member functions is:
+
+	afunc1::20=##15;:i;2A.;afunc2::20:i;2A.;
+
+   For the case of overloaded operators, the format is op$::*.funcs, where
+   $ is the CPLUS_MARKER (usually '$'), `*' holds the place for an operator
+   name (such as `+=') and `.' marks the end of the operator name.
+
+   Returns 1 for success, 0 for failure.  */
+
+static int
+read_member_functions (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  int nfn_fields = 0;
+  int length = 0;
+  /* Total number of member functions defined in this class.  If the class
+     defines two `f' functions, and one `g' function, then this will have
+     the value 3.  */
+  int total_length = 0;
+  int i;
+  struct next_fnfield
+    {
+      struct next_fnfield *next;
+      struct fn_field fn_field;
+    } *sublist;
+  struct type *look_ahead_type;
+  struct next_fnfieldlist *new_fnlist;
+  struct next_fnfield *new_sublist;
+  char *main_fn_name;
+  register char *p;
+      
+  /* Process each list until we find something that is not a member function
+     or find the end of the functions. */
+
+  while (**pp != ';')
+    {
+      /* We should be positioned at the start of the function name.
+	 Scan forward to find the first ':' and if it is not the
+	 first of a "::" delimiter, then this is not a member function. */
+      p = *pp;
+      while (*p != ':')
+	{
+	  p++;
+	}
+      if (p[1] != ':')
+	{
+	  break;
+	}
+
+      sublist = NULL;
+      look_ahead_type = NULL;
+      length = 0;
+      
+      new_fnlist = (struct next_fnfieldlist *)
+	xmalloc (sizeof (struct next_fnfieldlist));
+      make_cleanup (free, new_fnlist);
+      memset (new_fnlist, 0, sizeof (struct next_fnfieldlist));
+      
+      if ((*pp)[0] == 'o' && (*pp)[1] == 'p' && is_cplus_marker ((*pp)[2]))
+	{
+	  /* This is a completely wierd case.  In order to stuff in the
+	     names that might contain colons (the usual name delimiter),
+	     Mike Tiemann defined a different name format which is
+	     signalled if the identifier is "op$".  In that case, the
+	     format is "op$::XXXX." where XXXX is the name.  This is
+	     used for names like "+" or "=".  YUUUUUUUK!  FIXME!  */
+	  /* This lets the user type "break operator+".
+	     We could just put in "+" as the name, but that wouldn't
+	     work for "*".  */
+	  static char opname[32] = {'o', 'p', CPLUS_MARKER};
+	  char *o = opname + 3;
+	  
+	  /* Skip past '::'.  */
+	  *pp = p + 2;
+
+	  STABS_CONTINUE (pp, objfile);
+	  p = *pp;
+	  while (*p != '.')
+	    {
+	      *o++ = *p++;
+	    }
+	  main_fn_name = savestring (opname, o - opname);
+	  /* Skip past '.'  */
+	  *pp = p + 1;
+	}
+      else
+	{
+	  main_fn_name = savestring (*pp, p - *pp);
+	  /* Skip past '::'.  */
+	  *pp = p + 2;
+	}
+      new_fnlist -> fn_fieldlist.name = main_fn_name;
+      
+      do
+	{
+	  new_sublist =
+	    (struct next_fnfield *) xmalloc (sizeof (struct next_fnfield));
+	  make_cleanup (free, new_sublist);
+	  memset (new_sublist, 0, sizeof (struct next_fnfield));
+	  
+	  /* Check for and handle cretinous dbx symbol name continuation!  */
+	  if (look_ahead_type == NULL)
+	    {
+	      /* Normal case. */
+	      STABS_CONTINUE (pp, objfile);
+	      
+	      new_sublist -> fn_field.type = read_type (pp, objfile);
+	      if (**pp != ':')
+		{
+		  /* Invalid symtab info for member function.  */
+		  return 0;
+		}
+	    }
+	  else
+	    {
+	      /* g++ version 1 kludge */
+	      new_sublist -> fn_field.type = look_ahead_type;
+	      look_ahead_type = NULL;
+	    }
+	  
+	  (*pp)++;
+	  p = *pp;
+	  while (*p != ';')
+	    {
+	      p++;
+	    }
+	  
+	  /* If this is just a stub, then we don't have the real name here. */
+
+	  if (TYPE_FLAGS (new_sublist -> fn_field.type) & TYPE_FLAG_STUB)
+	    {
+	      if (!TYPE_DOMAIN_TYPE (new_sublist -> fn_field.type))
+		TYPE_DOMAIN_TYPE (new_sublist -> fn_field.type) = type;
+	      new_sublist -> fn_field.is_stub = 1;
+	    }
+	  new_sublist -> fn_field.physname = savestring (*pp, p - *pp);
+	  *pp = p + 1;
+	  
+	  /* Set this member function's visibility fields.  */
+	  switch (*(*pp)++)
+	    {
+	      case VISIBILITY_PRIVATE:
+	        new_sublist -> fn_field.is_private = 1;
+		break;
+	      case VISIBILITY_PROTECTED:
+		new_sublist -> fn_field.is_protected = 1;
+		break;
+	    }
+	  
+	  STABS_CONTINUE (pp, objfile);
+	  switch (**pp)
+	    {
+	      case 'A': /* Normal functions. */
+	        new_sublist -> fn_field.is_const = 0;
+		new_sublist -> fn_field.is_volatile = 0;
+		(*pp)++;
+		break;
+	      case 'B': /* `const' member functions. */
+		new_sublist -> fn_field.is_const = 1;
+		new_sublist -> fn_field.is_volatile = 0;
+		(*pp)++;
+		break;
+	      case 'C': /* `volatile' member function. */
+		new_sublist -> fn_field.is_const = 0;
+		new_sublist -> fn_field.is_volatile = 1;
+		(*pp)++;
+		break;
+	      case 'D': /* `const volatile' member function. */
+		new_sublist -> fn_field.is_const = 1;
+		new_sublist -> fn_field.is_volatile = 1;
+		(*pp)++;
+		break;
+	      case '*': /* File compiled with g++ version 1 -- no info */
+	      case '?':
+	      case '.':
+		break;
+	      default:
+		complain (&const_vol_complaint, **pp);
+		break;
+	    }
+	  
+	  switch (*(*pp)++)
+	    {
+	      case '*':
+	      {
+		int nbits;
+	        /* virtual member function, followed by index.
+		   The sign bit is set to distinguish pointers-to-methods
+		   from virtual function indicies.  Since the array is
+		   in words, the quantity must be shifted left by 1
+		   on 16 bit machine, and by 2 on 32 bit machine, forcing
+		   the sign bit out, and usable as a valid index into
+		   the array.  Remove the sign bit here.  */
+	        new_sublist -> fn_field.voffset =
+		  (0x7fffffff & read_huge_number (pp, ';', &nbits)) + 2;
+		if (nbits != 0)
+		  return 0;
+	      
+		STABS_CONTINUE (pp, objfile);
+		if (**pp == ';' || **pp == '\0')
+		  {
+		    /* Must be g++ version 1.  */
+		    new_sublist -> fn_field.fcontext = 0;
+		  }
+		else
+		  {
+		    /* Figure out from whence this virtual function came.
+		       It may belong to virtual function table of
+		       one of its baseclasses.  */
+		    look_ahead_type = read_type (pp, objfile);
+		    if (**pp == ':')
+		      {
+			/* g++ version 1 overloaded methods. */
+		      }
+		    else
+		      {
+			new_sublist -> fn_field.fcontext = look_ahead_type;
+			if (**pp != ';')
+			  {
+			    return 0;
+			  }
+			else
+			  {
+			    ++*pp;
+			  }
+			look_ahead_type = NULL;
+		      }
+		  }
+		break;
+	      }
+	      case '?':
+		/* static member function.  */
+		new_sublist -> fn_field.voffset = VOFFSET_STATIC;
+		if (strncmp (new_sublist -> fn_field.physname,
+			     main_fn_name, strlen (main_fn_name)))
+		  {
+		    new_sublist -> fn_field.is_stub = 1;
+		  }
+		break;
+	      
+	      default:
+		/* error */
+		complain (&member_fn_complaint, (*pp)[-1]);
+		/* Fall through into normal member function.  */
+	      
+	      case '.':
+		/* normal member function.  */
+		new_sublist -> fn_field.voffset = 0;
+		new_sublist -> fn_field.fcontext = 0;
+		break;
+	    }
+	  
+	  new_sublist -> next = sublist;
+	  sublist = new_sublist;
+	  length++;
+	  STABS_CONTINUE (pp, objfile);
+	}
+      while (**pp != ';' && **pp != '\0');
+      
+      (*pp)++;
+      
+      new_fnlist -> fn_fieldlist.fn_fields = (struct fn_field *)
+	obstack_alloc (&objfile -> type_obstack, 
+		       sizeof (struct fn_field) * length);
+      memset (new_fnlist -> fn_fieldlist.fn_fields, 0,
+	      sizeof (struct fn_field) * length);
+      for (i = length; (i--, sublist); sublist = sublist -> next)
+	{
+	  new_fnlist -> fn_fieldlist.fn_fields[i] = sublist -> fn_field;
+	}
+      
+      new_fnlist -> fn_fieldlist.length = length;
+      new_fnlist -> next = fip -> fnlist;
+      fip -> fnlist = new_fnlist;
+      nfn_fields++;
+      total_length += length;
+      STABS_CONTINUE (pp, objfile);
+    }
+
+  if (nfn_fields)
+    {
+      ALLOCATE_CPLUS_STRUCT_TYPE (type);
+      TYPE_FN_FIELDLISTS (type) = (struct fn_fieldlist *)
+	TYPE_ALLOC (type, sizeof (struct fn_fieldlist) * nfn_fields);
+      memset (TYPE_FN_FIELDLISTS (type), 0,
+	      sizeof (struct fn_fieldlist) * nfn_fields);
+      TYPE_NFN_FIELDS (type) = nfn_fields;
+      TYPE_NFN_FIELDS_TOTAL (type) = total_length;
+    }
+
+  return 1;
+}
+
+/* Special GNU C++ name.
+
+   Returns 1 for success, 0 for failure.  "failure" means that we can't
+   keep parsing and it's time for error_type().  */
+
+static int
+read_cpp_abbrev (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  register char *p;
+  char *name;
+  char cpp_abbrev;
+  struct type *context;
+
+  p = *pp;
+  if (*++p == 'v')
+    {
+      name = NULL;
+      cpp_abbrev = *++p;
+
+      *pp = p + 1;
+
+      /* At this point, *pp points to something like "22:23=*22...",
+	 where the type number before the ':' is the "context" and
+	 everything after is a regular type definition.  Lookup the
+	 type, find it's name, and construct the field name. */
+
+      context = read_type (pp, objfile);
+
+      switch (cpp_abbrev)
+	{
+	  case 'f':		/* $vf -- a virtual function table pointer */
+	    fip->list->field.name =
+	      obconcat (&objfile->type_obstack, vptr_name, "", "");
+	    break;
+
+	  case 'b':		/* $vb -- a virtual bsomethingorother */
+	    name = type_name_no_tag (context);
+	    if (name == NULL)
+	      {
+		complain (&invalid_cpp_type_complaint, symnum);
+		name = "FOO";
+	      }
+	    fip->list->field.name =
+	      obconcat (&objfile->type_obstack, vb_name, name, "");
+	    break;
+
+	  default:
+	    complain (&invalid_cpp_abbrev_complaint, *pp);
+	    fip->list->field.name =
+	      obconcat (&objfile->type_obstack,
+			"INVALID_CPLUSPLUS_ABBREV", "", "");
+	    break;
+	}
+
+      /* At this point, *pp points to the ':'.  Skip it and read the
+	 field type. */
+
+      p = ++(*pp);
+      if (p[-1] != ':')
+	{
+	  complain (&invalid_cpp_abbrev_complaint, *pp);
+	  return 0;
+	}
+      fip->list->field.type = read_type (pp, objfile);
+      if (**pp == ',')
+	(*pp)++;			/* Skip the comma.  */
+      else
+	return 0;
+
+      {
+	int nbits;
+	FIELD_BITPOS (fip->list->field) = read_huge_number (pp, ';', &nbits);
+	if (nbits != 0)
+	  return 0;
+      }
+      /* This field is unpacked.  */
+      FIELD_BITSIZE (fip->list->field) = 0;
+      fip->list->visibility = VISIBILITY_PRIVATE;
+    }
+  else
+    {
+      complain (&invalid_cpp_abbrev_complaint, *pp);
+      /* We have no idea what syntax an unrecognized abbrev would have, so
+	 better return 0.  If we returned 1, we would need to at least advance
+	 *pp to avoid an infinite loop.  */
+      return 0;
+    }
+  return 1;
+}
+
+static void
+read_one_struct_field (fip, pp, p, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     char *p;
+     struct type *type;
+     struct objfile *objfile;
+{
+  /* The following is code to work around cfront generated stabs.
+     The stabs contains full mangled name for each field.
+     We try to demangle the name and extract the field name out of it.
+  */
+  if (ARM_DEMANGLING && current_subfile->language == language_cplus)
+    {
+      char save_p;
+      char *dem, *dem_p;
+      save_p = *p;
+      *p = '\0';
+      dem = cplus_demangle (*pp, DMGL_ANSI | DMGL_PARAMS);
+      if (dem != NULL)
+        {
+          dem_p = strrchr (dem, ':');
+          if (dem_p != 0 && *(dem_p-1)==':')
+            dem_p++;
+          FIELD_NAME (fip->list->field) =
+            obsavestring (dem_p, strlen (dem_p), &objfile -> type_obstack);
+        }
+      else
+        {
+          FIELD_NAME (fip->list->field) =
+            obsavestring (*pp, p - *pp, &objfile -> type_obstack);
+        }
+      *p = save_p;
+    }
+  /* end of code for cfront work around */
+
+  else
+    fip -> list -> field.name =
+    obsavestring (*pp, p - *pp, &objfile -> type_obstack);
+  *pp = p + 1;
+
+  /* This means we have a visibility for a field coming. */
+  if (**pp == '/')
+    {
+      (*pp)++;
+      fip -> list -> visibility = *(*pp)++;
+    }
+  else
+    {
+      /* normal dbx-style format, no explicit visibility */
+      fip -> list -> visibility = VISIBILITY_PUBLIC;
+    }
+
+  fip -> list -> field.type = read_type (pp, objfile);
+  if (**pp == ':')
+    {
+      p = ++(*pp);
+#if 0
+      /* Possible future hook for nested types. */
+      if (**pp == '!')
+	{
+	  fip -> list -> field.bitpos = (long)-2; /* nested type */
+	  p = ++(*pp);
+	}
+      else ...;
+#endif
+      while (*p != ';') 
+	{
+	  p++;
+	}
+      /* Static class member.  */
+      SET_FIELD_PHYSNAME (fip->list->field, savestring (*pp, p - *pp));
+      *pp = p + 1;
+      return;
+    }
+  else if (**pp != ',')
+    {
+      /* Bad structure-type format.  */
+      complain (&stabs_general_complaint, "bad structure-type format");
+      return;
+    }
+
+  (*pp)++;			/* Skip the comma.  */
+
+  {
+    int nbits;
+    FIELD_BITPOS (fip->list->field) = read_huge_number (pp, ',', &nbits);
+    if (nbits != 0)
+      {
+	complain (&stabs_general_complaint, "bad structure-type format");
+	return;
+      }
+    FIELD_BITSIZE (fip->list->field) = read_huge_number (pp, ';', &nbits);
+    if (nbits != 0)
+      {
+	complain (&stabs_general_complaint, "bad structure-type format");
+	return;
+      }
+  }
+
+  if (FIELD_BITPOS (fip->list->field) == 0
+      && FIELD_BITSIZE (fip->list->field) == 0)
+    {
+      /* This can happen in two cases: (1) at least for gcc 2.4.5 or so,
+	 it is a field which has been optimized out.  The correct stab for
+	 this case is to use VISIBILITY_IGNORE, but that is a recent
+	 invention.  (2) It is a 0-size array.  For example
+	 union { int num; char str[0]; } foo.  Printing "<no value>" for
+	 str in "p foo" is OK, since foo.str (and thus foo.str[3])
+	 will continue to work, and a 0-size array as a whole doesn't
+	 have any contents to print.
+
+	 I suspect this probably could also happen with gcc -gstabs (not
+	 -gstabs+) for static fields, and perhaps other C++ extensions.
+	 Hopefully few people use -gstabs with gdb, since it is intended
+	 for dbx compatibility.  */
+
+      /* Ignore this field.  */
+      fip -> list-> visibility = VISIBILITY_IGNORE;
+    }
+  else
+    {
+      /* Detect an unpacked field and mark it as such.
+	 dbx gives a bit size for all fields.
+	 Note that forward refs cannot be packed,
+	 and treat enums as if they had the width of ints.  */
+
+      struct type *field_type = check_typedef (FIELD_TYPE (fip->list->field));
+
+      if (TYPE_CODE (field_type) != TYPE_CODE_INT
+	  && TYPE_CODE (field_type) != TYPE_CODE_RANGE
+	  && TYPE_CODE (field_type) != TYPE_CODE_BOOL
+	  && TYPE_CODE (field_type) != TYPE_CODE_ENUM)
+	{
+	  FIELD_BITSIZE (fip->list->field) = 0;
+	}
+      if ((FIELD_BITSIZE (fip->list->field) 
+	   == TARGET_CHAR_BIT * TYPE_LENGTH (field_type)
+	   || (TYPE_CODE (field_type) == TYPE_CODE_ENUM
+	       && FIELD_BITSIZE (fip->list->field) == TARGET_INT_BIT )
+	   )
+	  &&
+	  FIELD_BITPOS (fip->list->field) % 8 == 0)
+	{
+	  FIELD_BITSIZE (fip->list->field) = 0;
+	}
+    }
+}
+
+
+/* Read struct or class data fields.  They have the form:
+
+   	NAME : [VISIBILITY] TYPENUM , BITPOS , BITSIZE ;
+
+   At the end, we see a semicolon instead of a field.
+
+   In C++, this may wind up being NAME:?TYPENUM:PHYSNAME; for
+   a static field.
+
+   The optional VISIBILITY is one of:
+
+   	'/0'	(VISIBILITY_PRIVATE)
+	'/1'	(VISIBILITY_PROTECTED)
+	'/2'	(VISIBILITY_PUBLIC)
+	'/9'	(VISIBILITY_IGNORE)
+
+   or nothing, for C style fields with public visibility.
+
+   Returns 1 for success, 0 for failure.  */
+
+static int
+read_struct_fields (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  register char *p;
+  struct nextfield *new;
+
+  /* We better set p right now, in case there are no fields at all...    */
+
+  p = *pp;
+
+  /* Read each data member type until we find the terminating ';' at the end of
+     the data member list, or break for some other reason such as finding the
+     start of the member function list. */
+
+  while (**pp != ';')
+    {
+      if (os9k_stabs && **pp == ',') break;
+      STABS_CONTINUE (pp, objfile);
+      /* Get space to record the next field's data.  */
+      new = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+      make_cleanup (free, new);
+      memset (new, 0, sizeof (struct nextfield));
+      new -> next = fip -> list;
+      fip -> list = new;
+
+      /* Get the field name.  */
+      p = *pp;
+
+      /* If is starts with CPLUS_MARKER it is a special abbreviation,
+	 unless the CPLUS_MARKER is followed by an underscore, in
+	 which case it is just the name of an anonymous type, which we
+	 should handle like any other type name.  */
+
+      if (is_cplus_marker (p[0]) && p[1] != '_')
+	{
+	  if (!read_cpp_abbrev (fip, pp, type, objfile))
+	    return 0;
+	  continue;
+	}
+
+      /* Look for the ':' that separates the field name from the field
+	 values.  Data members are delimited by a single ':', while member
+	 functions are delimited by a pair of ':'s.  When we hit the member
+	 functions (if any), terminate scan loop and return. */
+
+      while (*p != ':' && *p != '\0') 
+	{
+	  p++;
+	}
+      if (*p == '\0')
+	return 0;
+
+      /* Check to see if we have hit the member functions yet.  */
+      if (p[1] == ':')
+	{
+	  break;
+	}
+      read_one_struct_field (fip, pp, p, type, objfile);
+    }
+  if (p[0] == ':' && p[1] == ':')
+    {
+      /* chill the list of fields: the last entry (at the head) is a
+	 partially constructed entry which we now scrub. */
+      fip -> list = fip -> list -> next;
+    }
+  return 1;
+}
+
+/* The stabs for C++ derived classes contain baseclass information which
+   is marked by a '!' character after the total size.  This function is
+   called when we encounter the baseclass marker, and slurps up all the
+   baseclass information.
+
+   Immediately following the '!' marker is the number of base classes that
+   the class is derived from, followed by information for each base class.
+   For each base class, there are two visibility specifiers, a bit offset
+   to the base class information within the derived class, a reference to
+   the type for the base class, and a terminating semicolon.
+
+   A typical example, with two base classes, would be "!2,020,19;0264,21;".
+   						       ^^ ^ ^ ^  ^ ^  ^
+	Baseclass information marker __________________|| | | |  | |  |
+	Number of baseclasses __________________________| | | |  | |  |
+	Visibility specifiers (2) ________________________| | |  | |  |
+	Offset in bits from start of class _________________| |  | |  |
+	Type number for base class ___________________________|  | |  |
+	Visibility specifiers (2) _______________________________| |  |
+	Offset in bits from start of class ________________________|  |
+	Type number of base class ____________________________________|
+
+  Return 1 for success, 0 for (error-type-inducing) failure.  */
+
+static int
+read_baseclasses (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  int i;
+  struct nextfield *new;
+
+  if (**pp != '!')
+    {
+      return 1;
+    }
+  else
+    {
+      /* Skip the '!' baseclass information marker. */
+      (*pp)++;
+    }
+
+  ALLOCATE_CPLUS_STRUCT_TYPE (type);
+  {
+    int nbits;
+    TYPE_N_BASECLASSES (type) = read_huge_number (pp, ',', &nbits);
+    if (nbits != 0)
+      return 0;
+  }
+
+#if 0
+  /* Some stupid compilers have trouble with the following, so break
+     it up into simpler expressions.  */
+  TYPE_FIELD_VIRTUAL_BITS (type) = (B_TYPE *)
+    TYPE_ALLOC (type, B_BYTES (TYPE_N_BASECLASSES (type)));
+#else
+  {
+    int num_bytes = B_BYTES (TYPE_N_BASECLASSES (type));
+    char *pointer;
+
+    pointer = (char *) TYPE_ALLOC (type, num_bytes);
+    TYPE_FIELD_VIRTUAL_BITS (type) = (B_TYPE *) pointer;
+  }
+#endif /* 0 */
+
+  B_CLRALL (TYPE_FIELD_VIRTUAL_BITS (type), TYPE_N_BASECLASSES (type));
+
+  for (i = 0; i < TYPE_N_BASECLASSES (type); i++)
+    {
+      new = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+      make_cleanup (free, new);
+      memset (new, 0, sizeof (struct nextfield));
+      new -> next = fip -> list;
+      fip -> list = new;
+      FIELD_BITSIZE (new->field) = 0;	/* this should be an unpacked field! */
+
+      STABS_CONTINUE (pp, objfile);
+      switch (**pp)
+	{
+	  case '0':
+	    /* Nothing to do. */
+	    break;
+	  case '1':
+	    SET_TYPE_FIELD_VIRTUAL (type, i);
+	    break;
+	  default:
+	    /* Unknown character.  Complain and treat it as non-virtual.  */
+	    {
+	      static struct complaint msg = {
+		"Unknown virtual character `%c' for baseclass", 0, 0};
+	      complain (&msg, **pp);
+	    }
+	}
+      ++(*pp);
+
+      new -> visibility = *(*pp)++;
+      switch (new -> visibility)
+	{
+	  case VISIBILITY_PRIVATE:
+	  case VISIBILITY_PROTECTED:
+	  case VISIBILITY_PUBLIC:
+	    break;
+	  default:
+	    /* Bad visibility format.  Complain and treat it as
+	       public.  */
+	    {
+	      static struct complaint msg = {
+		"Unknown visibility `%c' for baseclass", 0, 0};
+	      complain (&msg, new -> visibility);
+	      new -> visibility = VISIBILITY_PUBLIC;
+	    }
+	}
+
+      {
+	int nbits;
+	
+	/* The remaining value is the bit offset of the portion of the object
+	   corresponding to this baseclass.  Always zero in the absence of
+	   multiple inheritance.  */
+
+	FIELD_BITPOS (new->field) = read_huge_number (pp, ',', &nbits);
+	if (nbits != 0)
+	  return 0;
+      }
+
+      /* The last piece of baseclass information is the type of the
+	 base class.  Read it, and remember it's type name as this
+	 field's name. */
+
+      new -> field.type = read_type (pp, objfile);
+      new -> field.name = type_name_no_tag (new -> field.type);
+
+      /* skip trailing ';' and bump count of number of fields seen */
+      if (**pp == ';')
+	(*pp)++;
+      else
+	return 0;
+    }
+  return 1;
+}
+
+/* The tail end of stabs for C++ classes that contain a virtual function
+   pointer contains a tilde, a %, and a type number.
+   The type number refers to the base class (possibly this class itself) which
+   contains the vtable pointer for the current class.
+
+   This function is called when we have parsed all the method declarations,
+   so we can look for the vptr base class info.  */
+
+static int
+read_tilde_fields (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  register char *p;
+
+  STABS_CONTINUE (pp, objfile);
+
+  /* If we are positioned at a ';', then skip it. */
+  if (**pp == ';')
+    {
+      (*pp)++;
+    }
+
+  if (**pp == '~')
+    {
+      (*pp)++;
+
+      if (**pp == '=' || **pp == '+' || **pp == '-')
+	{
+	  /* Obsolete flags that used to indicate the presence
+	     of constructors and/or destructors. */
+	  (*pp)++;
+	}
+
+      /* Read either a '%' or the final ';'.  */
+      if (*(*pp)++ == '%')
+	{
+	  /* The next number is the type number of the base class
+	     (possibly our own class) which supplies the vtable for
+	     this class.  Parse it out, and search that class to find
+	     its vtable pointer, and install those into TYPE_VPTR_BASETYPE
+	     and TYPE_VPTR_FIELDNO.  */
+
+	  struct type *t;
+	  int i;
+
+	  t = read_type (pp, objfile);
+	  p = (*pp)++;
+	  while (*p != '\0' && *p != ';')
+	    {
+	      p++;
+	    }
+	  if (*p == '\0')
+	    {
+	      /* Premature end of symbol.  */
+	      return 0;
+	    }
+	  
+	  TYPE_VPTR_BASETYPE (type) = t;
+	  if (type == t)		/* Our own class provides vtbl ptr */
+	    {
+	      for (i = TYPE_NFIELDS (t) - 1;
+		   i >= TYPE_N_BASECLASSES (t);
+		   --i)
+		{
+		  if (! strncmp (TYPE_FIELD_NAME (t, i), vptr_name, 
+				 sizeof (vptr_name) - 1))
+		    {
+		      TYPE_VPTR_FIELDNO (type) = i;
+		      goto gotit;
+		    }
+		}
+	      /* Virtual function table field not found.  */
+	      complain (&vtbl_notfound_complaint, TYPE_NAME (type));
+	      return 0;
+	    }
+	  else
+	    {
+	      TYPE_VPTR_FIELDNO (type) = TYPE_VPTR_FIELDNO (t);
+	    }
+
+    gotit:
+	  *pp = p + 1;
+	}
+    }
+  return 1;
+}
+
+static int
+attach_fn_fields_to_type (fip, type)
+     struct field_info *fip;
+     register struct type *type;
+{
+  register int n;
+
+  for (n = TYPE_NFN_FIELDS (type);
+       fip -> fnlist != NULL;
+       fip -> fnlist = fip -> fnlist -> next)
+    {
+      --n;                      /* Circumvent Sun3 compiler bug */
+      TYPE_FN_FIELDLISTS (type)[n] = fip -> fnlist -> fn_fieldlist;
+    }
+  return 1;
+}
+
+/* read cfront class static data.
+   pp points to string starting with the list of static data
+   eg: A:ZcA;1@Bpub v2@Bvirpri;__ct__1AFv func__1AFv *sfunc__1AFv ;as__1A ;;
+             							   ^^^^^^^^
+
+       A:ZcA;;foopri__1AFv foopro__1AFv __ct__1AFv __ct__1AFRC1A foopub__1AFv ;;;
+             							               ^
+   */
+
+static int
+read_cfront_static_fields (fip, pp, type, objfile)
+     struct field_info *fip;
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  struct nextfield * new;
+  struct type *stype;
+  char * sname;
+  struct symbol * ref_static=0;
+      
+  if (**pp==';')		/* no static data; return */
+    {
+      ++(*pp);
+      return 1;
+    }
+
+  /* Process each field in the list until we find the terminating ";" */
+
+  /* eg: p = "as__1A ;;;" */
+  STABS_CONTINUE (pp, objfile); 		/* handle \\ */
+  while (**pp!=';' && (sname = get_substring (pp, ' '), sname)) 
+    {
+      ref_static = lookup_symbol (sname, 0, VAR_NAMESPACE, 0, 0); /*demangled_name*/
+      if (!ref_static) 
+        {
+          static struct complaint msg = {"\
+      		Unable to find symbol for static data field %s\n",
+                                0, 0};
+	  complain (&msg, sname);
+	  continue;
+	}
+      stype = SYMBOL_TYPE(ref_static);
+
+      /* allocate a new fip */
+      new = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+      make_cleanup (free, new);
+      memset (new, 0, sizeof (struct nextfield));
+      new -> next = fip -> list;
+      fip -> list = new;
+
+      /* set visibility */
+      /* FIXME! no way to tell visibility from stabs??? */
+      new -> visibility = VISIBILITY_PUBLIC;
+
+      /* set field info into fip */
+      fip -> list -> field.type = stype; 
+
+      /* set bitpos & bitsize */
+      SET_FIELD_PHYSNAME (fip->list->field, savestring (sname, strlen (sname)));
+
+      /* set name field */
+      /* The following is code to work around cfront generated stabs.
+         The stabs contains full mangled name for each field.
+         We try to demangle the name and extract the field name out of it.
+      */
+      if (ARM_DEMANGLING)
+        {
+          char *dem, *dem_p;
+          dem = cplus_demangle (sname, DMGL_ANSI | DMGL_PARAMS);
+          if (dem != NULL)
+            {
+              dem_p = strrchr (dem, ':');
+              if (dem_p != 0 && *(dem_p-1)==':')
+                dem_p++;
+              fip->list->field.name =
+                obsavestring (dem_p, strlen (dem_p), &objfile -> type_obstack);
+            }
+          else
+            {
+              fip->list->field.name =
+                obsavestring (sname, strlen (sname), &objfile -> type_obstack); 
+	    }
+        } /* end of code for cfront work around */ 
+    } /* loop again for next static field */
+  return 1;
+}
+
+/* Copy structure fields to fip so attach_fields_to_type will work.
+   type has already been created with the initial instance data fields.
+   Now we want to be able to add the other members to the class,
+   so we want to add them back to the fip and reattach them again
+   once we have collected all the class members. */
+
+static int
+copy_cfront_struct_fields (fip, type, objfile)
+     struct field_info *fip;
+     struct type *type;
+     struct objfile *objfile;
+{
+  int nfields = TYPE_NFIELDS(type);
+  int i;
+  struct nextfield * new;
+
+  /* Copy the fields into the list of fips and reset the types 
+     to remove the old fields */
+
+  for (i=0; i<nfields; i++)
+    {
+      /* allocate a new fip */
+      new = (struct nextfield *) xmalloc (sizeof (struct nextfield));
+      make_cleanup (free, new);
+      memset (new, 0, sizeof (struct nextfield));
+      new -> next = fip -> list;
+      fip -> list = new;
+
+      /* copy field info into fip */
+      new -> field = TYPE_FIELD (type, i);
+      /* set visibility */
+      if (TYPE_FIELD_PROTECTED (type, i))
+	new -> visibility = VISIBILITY_PROTECTED;
+      else if (TYPE_FIELD_PRIVATE (type, i))
+  	 new -> visibility = VISIBILITY_PRIVATE;
+      else
+	 new -> visibility = VISIBILITY_PUBLIC;
+    }
+  /* Now delete the fields from the type since we will be 
+     allocing new space once we get the rest of the fields 
+     in attach_fields_to_type.
+     The pointer TYPE_FIELDS(type) is left dangling but should 
+     be freed later by objstack_free */
+  TYPE_FIELDS (type)=0;
+  TYPE_NFIELDS (type) = 0;
+
+  return 1;
+}
+
+/* Create the vector of fields, and record how big it is.
+   We need this info to record proper virtual function table information
+   for this class's virtual functions.  */
+
+static int
+attach_fields_to_type (fip, type, objfile)
+     struct field_info *fip;
+     register struct type *type;
+     struct objfile *objfile;
+{
+  register int nfields = 0;
+  register int non_public_fields = 0;
+  register struct nextfield *scan;
+
+  /* Count up the number of fields that we have, as well as taking note of
+     whether or not there are any non-public fields, which requires us to
+     allocate and build the private_field_bits and protected_field_bits
+     bitfields. */
+
+  for (scan = fip -> list; scan != NULL; scan = scan -> next)
+    {
+      nfields++;
+      if (scan -> visibility != VISIBILITY_PUBLIC)
+	{
+	  non_public_fields++;
+	}
+    }
+
+  /* Now we know how many fields there are, and whether or not there are any
+     non-public fields.  Record the field count, allocate space for the
+     array of fields, and create blank visibility bitfields if necessary. */
+
+  TYPE_NFIELDS (type) = nfields;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nfields);
+  memset (TYPE_FIELDS (type), 0, sizeof (struct field) * nfields);
+
+  if (non_public_fields)
+    {
+      ALLOCATE_CPLUS_STRUCT_TYPE (type);
+
+      TYPE_FIELD_PRIVATE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PRIVATE_BITS (type), nfields);
+
+      TYPE_FIELD_PROTECTED_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_PROTECTED_BITS (type), nfields);
+
+      TYPE_FIELD_IGNORE_BITS (type) =
+	(B_TYPE *) TYPE_ALLOC (type, B_BYTES (nfields));
+      B_CLRALL (TYPE_FIELD_IGNORE_BITS (type), nfields);
+    }
+
+  /* Copy the saved-up fields into the field vector.  Start from the head
+     of the list, adding to the tail of the field array, so that they end
+     up in the same order in the array in which they were added to the list. */
+
+  while (nfields-- > 0)
+    {
+      TYPE_FIELD (type, nfields) = fip -> list -> field;
+      switch (fip -> list -> visibility)
+	{
+	  case VISIBILITY_PRIVATE:
+	    SET_TYPE_FIELD_PRIVATE (type, nfields);
+	    break;
+
+	  case VISIBILITY_PROTECTED:
+	    SET_TYPE_FIELD_PROTECTED (type, nfields);
+	    break;
+
+	  case VISIBILITY_IGNORE:
+	    SET_TYPE_FIELD_IGNORE (type, nfields);
+	    break;
+
+	  case VISIBILITY_PUBLIC:
+	    break;
+
+	  default:
+	    /* Unknown visibility.  Complain and treat it as public.  */
+	    {
+	      static struct complaint msg = {
+		"Unknown visibility `%c' for field", 0, 0};
+	      complain (&msg, fip -> list -> visibility);
+	    }
+	    break;
+	}
+      fip -> list = fip -> list -> next;
+    }
+  return 1;
+}
+
+/* Read the description of a structure (or union type) and return an object
+   describing the type.
+
+   PP points to a character pointer that points to the next unconsumed token
+   in the the stabs string.  For example, given stabs "A:T4=s4a:1,0,32;;",
+   *PP will point to "4a:1,0,32;;".
+
+   TYPE points to an incomplete type that needs to be filled in.
+
+   OBJFILE points to the current objfile from which the stabs information is
+   being read.  (Note that it is redundant in that TYPE also contains a pointer
+   to this same objfile, so it might be a good idea to eliminate it.  FIXME). 
+   */
+
+static struct type *
+read_struct_type (pp, type, objfile)
+     char **pp;
+     struct type *type;
+     struct objfile *objfile;
+{
+  struct cleanup *back_to;
+  struct field_info fi;
+
+  fi.list = NULL;
+  fi.fnlist = NULL;
+
+  back_to = make_cleanup (null_cleanup, 0);
+
+  INIT_CPLUS_SPECIFIC (type);
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+
+  /* First comes the total size in bytes.  */
+
+  {
+    int nbits;
+    TYPE_LENGTH (type) = read_huge_number (pp, 0, &nbits);
+    if (nbits != 0)
+      return error_type (pp, objfile);
+  }
+
+  /* Now read the baseclasses, if any, read the regular C struct or C++
+     class member fields, attach the fields to the type, read the C++
+     member functions, attach them to the type, and then read any tilde
+     field (baseclass specifier for the class holding the main vtable). */
+
+  if (!read_baseclasses (&fi, pp, type, objfile)
+      || !read_struct_fields (&fi, pp, type, objfile)
+      || !attach_fields_to_type (&fi, type, objfile)
+      || !read_member_functions (&fi, pp, type, objfile)
+      || !attach_fn_fields_to_type (&fi, type)
+      || !read_tilde_fields (&fi, pp, type, objfile))
+    {
+      type = error_type (pp, objfile);
+    }
+
+  do_cleanups (back_to);
+  return (type);
+}
+
+/* Read a definition of an array type,
+   and create and return a suitable type object.
+   Also creates a range type which represents the bounds of that
+   array.  */
+
+static struct type *
+read_array_type (pp, type, objfile)
+     register char **pp;
+     register struct type *type;
+     struct objfile *objfile;
+{
+  struct type *index_type, *element_type, *range_type;
+  int lower, upper;
+  int adjustable = 0;
+  int nbits;
+
+  /* Format of an array type:
+     "ar<index type>;lower;upper;<array_contents_type>".
+     OS9000: "arlower,upper;<array_contents_type>".
+
+     Fortran adjustable arrays use Adigits or Tdigits for lower or upper;
+     for these, produce a type like float[][].  */
+
+  if (os9k_stabs)
+    index_type = builtin_type_int;
+  else
+    {
+      index_type = read_type (pp, objfile);
+      if (**pp != ';')
+	/* Improper format of array type decl.  */
+	return error_type (pp, objfile);
+      ++*pp;
+    }
+
+  if (!(**pp >= '0' && **pp <= '9') && **pp != '-')
+    {
+      (*pp)++;
+      adjustable = 1;
+    }
+  lower = read_huge_number (pp, os9k_stabs ? ',' : ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+
+  if (!(**pp >= '0' && **pp <= '9') && **pp != '-')
+    {
+      (*pp)++;
+      adjustable = 1;
+    }
+  upper = read_huge_number (pp, ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+  
+  element_type = read_type (pp, objfile);
+
+  if (adjustable)
+    {
+      lower = 0;
+      upper = -1;
+    }
+
+  range_type =
+    create_range_type ((struct type *) NULL, index_type, lower, upper);
+  type = create_array_type (type, element_type, range_type);
+
+  return type;
+}
+
+
+/* Read a definition of an enumeration type,
+   and create and return a suitable type object.
+   Also defines the symbols that represent the values of the type.  */
+
+static struct type *
+read_enum_type (pp, type, objfile)
+     register char **pp;
+     register struct type *type;
+     struct objfile *objfile;
+{
+  register char *p;
+  char *name;
+  register long n;
+  register struct symbol *sym;
+  int nsyms = 0;
+  struct pending **symlist;
+  struct pending *osyms, *syms;
+  int o_nsyms;
+  int nbits;
+  int unsigned_enum = 1;
+
+#if 0
+  /* FIXME!  The stabs produced by Sun CC merrily define things that ought
+     to be file-scope, between N_FN entries, using N_LSYM.  What's a mother
+     to do?  For now, force all enum values to file scope.  */
+  if (within_function)
+    symlist = &local_symbols;
+  else
+#endif
+    symlist = &file_symbols;
+  osyms = *symlist;
+  o_nsyms = osyms ? osyms->nsyms : 0;
+
+  if (os9k_stabs)
+    {
+      /* Size.  Perhaps this does not have to be conditionalized on
+	 os9k_stabs (assuming the name of an enum constant can't start
+	 with a digit).  */
+      read_huge_number (pp, 0, &nbits);
+      if (nbits != 0)
+	return error_type (pp, objfile);
+    }
+
+  /* The aix4 compiler emits an extra field before the enum members;
+     my guess is it's a type of some sort.  Just ignore it.  */
+  if (**pp == '-')
+    {
+      /* Skip over the type.  */
+      while (**pp != ':')
+        (*pp)++;
+
+      /* Skip over the colon.  */
+      (*pp)++;
+    }
+
+  /* Read the value-names and their values.
+     The input syntax is NAME:VALUE,NAME:VALUE, and so on.
+     A semicolon or comma instead of a NAME means the end.  */
+  while (**pp && **pp != ';' && **pp != ',')
+    {
+      STABS_CONTINUE (pp, objfile);
+      p = *pp;
+      while (*p != ':') p++;
+      name = obsavestring (*pp, p - *pp, &objfile -> symbol_obstack);
+      *pp = p + 1;
+      n = read_huge_number (pp, ',', &nbits);
+      if (nbits != 0)
+	return error_type (pp, objfile);
+
+      sym = (struct symbol *)
+	obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
+      memset (sym, 0, sizeof (struct symbol));
+      SYMBOL_NAME (sym) = name;
+      SYMBOL_LANGUAGE (sym) = current_subfile -> language;
+      SYMBOL_CLASS (sym) = LOC_CONST;
+      SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+      SYMBOL_VALUE (sym) = n;
+      if (n < 0)
+	unsigned_enum = 0;
+      add_symbol_to_list (sym, symlist);
+      nsyms++;
+    }
+
+  if (**pp == ';')
+    (*pp)++;			/* Skip the semicolon.  */
+
+  /* Now fill in the fields of the type-structure.  */
+
+  TYPE_LENGTH (type) = TARGET_INT_BIT / HOST_CHAR_BIT;
+  TYPE_CODE (type) = TYPE_CODE_ENUM;
+  TYPE_FLAGS (type) &= ~TYPE_FLAG_STUB;
+  if (unsigned_enum)
+    TYPE_FLAGS (type) |= TYPE_FLAG_UNSIGNED;
+  TYPE_NFIELDS (type) = nsyms;
+  TYPE_FIELDS (type) = (struct field *)
+    TYPE_ALLOC (type, sizeof (struct field) * nsyms);
+  memset (TYPE_FIELDS (type), 0, sizeof (struct field) * nsyms);
+
+  /* Find the symbols for the values and put them into the type.
+     The symbols can be found in the symlist that we put them on
+     to cause them to be defined.  osyms contains the old value
+     of that symlist; everything up to there was defined by us.  */
+  /* Note that we preserve the order of the enum constants, so
+     that in something like "enum {FOO, LAST_THING=FOO}" we print
+     FOO, not LAST_THING.  */
+
+  for (syms = *symlist, n = nsyms - 1; syms; syms = syms->next)
+    {
+      int last = syms == osyms ? o_nsyms : 0;
+      int j = syms->nsyms;
+      for (; --j >= last; --n)
+	{
+	  struct symbol *xsym = syms->symbol[j];
+	  SYMBOL_TYPE (xsym) = type;
+	  TYPE_FIELD_NAME (type, n) = SYMBOL_NAME (xsym);
+	  TYPE_FIELD_BITPOS (type, n) = SYMBOL_VALUE (xsym);
+	  TYPE_FIELD_BITSIZE (type, n) = 0;
+	}
+      if (syms == osyms)
+	break;
+    }
+
+  return type;
+}
+
+/* Sun's ACC uses a somewhat saner method for specifying the builtin
+   typedefs in every file (for int, long, etc):
+
+	type = b <signed> <width> <format type>; <offset>; <nbits>
+	signed = u or s.
+	optional format type = c or b for char or boolean.
+	offset = offset from high order bit to start bit of type.
+	width is # bytes in object of this type, nbits is # bits in type.
+
+   The width/offset stuff appears to be for small objects stored in
+   larger ones (e.g. `shorts' in `int' registers).  We ignore it for now,
+   FIXME.  */
+
+static struct type *
+read_sun_builtin_type (pp, typenums, objfile)
+     char **pp;
+     int typenums[2];
+     struct objfile *objfile;
+{
+  int type_bits;
+  int nbits;
+  int signed_type;
+  enum type_code code = TYPE_CODE_INT;
+
+  switch (**pp)
+    {
+      case 's':
+        signed_type = 1;
+	break;
+      case 'u':
+	signed_type = 0;
+	break;
+      default:
+	return error_type (pp, objfile);
+    }
+  (*pp)++;
+
+  /* For some odd reason, all forms of char put a c here.  This is strange
+     because no other type has this honor.  We can safely ignore this because
+     we actually determine 'char'acterness by the number of bits specified in
+     the descriptor.
+     Boolean forms, e.g Fortran logical*X, put a b here.  */
+
+  if (**pp == 'c')
+    (*pp)++;
+  else if (**pp == 'b')
+    {
+      code = TYPE_CODE_BOOL;
+      (*pp)++;
+    }
+
+  /* The first number appears to be the number of bytes occupied
+     by this type, except that unsigned short is 4 instead of 2.
+     Since this information is redundant with the third number,
+     we will ignore it.  */
+  read_huge_number (pp, ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+
+  /* The second number is always 0, so ignore it too. */
+  read_huge_number (pp, ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+
+  /* The third number is the number of bits for this type. */
+  type_bits = read_huge_number (pp, 0, &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+  /* The type *should* end with a semicolon.  If it are embedded
+     in a larger type the semicolon may be the only way to know where
+     the type ends.  If this type is at the end of the stabstring we
+     can deal with the omitted semicolon (but we don't have to like
+     it).  Don't bother to complain(), Sun's compiler omits the semicolon
+     for "void".  */
+  if (**pp == ';')
+    ++(*pp);
+
+  if (type_bits == 0)
+    return init_type (TYPE_CODE_VOID, 1,
+		      signed_type ? 0 : TYPE_FLAG_UNSIGNED, (char *)NULL,
+		      objfile);
+  else
+    return init_type (code,
+		      type_bits / TARGET_CHAR_BIT,
+		      signed_type ? 0 : TYPE_FLAG_UNSIGNED, (char *)NULL,
+		      objfile);
+}
+
+static struct type *
+read_sun_floating_type (pp, typenums, objfile)
+     char **pp;
+     int typenums[2];
+     struct objfile *objfile;
+{
+  int nbits;
+  int details;
+  int nbytes;
+
+  /* The first number has more details about the type, for example
+     FN_COMPLEX.  */
+  details = read_huge_number (pp, ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+
+  /* The second number is the number of bytes occupied by this type */
+  nbytes = read_huge_number (pp, ';', &nbits);
+  if (nbits != 0)
+    return error_type (pp, objfile);
+
+  if (details == NF_COMPLEX || details == NF_COMPLEX16
+      || details == NF_COMPLEX32)
+    /* This is a type we can't handle, but we do know the size.
+       We also will be able to give it a name.  */
+    return init_type (TYPE_CODE_COMPLEX, nbytes, 0, NULL, objfile);
+
+  return init_type (TYPE_CODE_FLT, nbytes, 0, NULL, objfile);
+}
+
+/* Read a number from the string pointed to by *PP.
+   The value of *PP is advanced over the number.
+   If END is nonzero, the character that ends the
+   number must match END, or an error happens;
+   and that character is skipped if it does match.
+   If END is zero, *PP is left pointing to that character.
+
+   If the number fits in a long, set *BITS to 0 and return the value.
+   If not, set *BITS to be the number of bits in the number and return 0.
+
+   If encounter garbage, set *BITS to -1 and return 0.  */
+
+static long
+read_huge_number (pp, end, bits)
+     char **pp;
+     int end;
+     int *bits;
+{
+  char *p = *pp;
+  int sign = 1;
+  long n = 0;
+  int radix = 10;
+  char overflow = 0;
+  int nbits = 0;
+  int c;
+  long upper_limit;
+  
+  if (*p == '-')
+    {
+      sign = -1;
+      p++;
+    }
+
+  /* Leading zero means octal.  GCC uses this to output values larger
+     than an int (because that would be hard in decimal).  */
+  if (*p == '0')
+    {
+      radix = 8;
+      p++;
+    }
+
+  if (os9k_stabs)
+    upper_limit = ULONG_MAX / radix;
+  else
+    upper_limit = LONG_MAX / radix;
+
+  while ((c = *p++) >= '0' && c < ('0' + radix))
+    {
+      if (n <= upper_limit)
+	{
+	  n *= radix;
+	  n += c - '0';		/* FIXME this overflows anyway */
+	}
+      else
+	overflow = 1;
+      
+      /* This depends on large values being output in octal, which is
+	 what GCC does. */
+      if (radix == 8)
+	{
+	  if (nbits == 0)
+	    {
+	      if (c == '0')
+		/* Ignore leading zeroes.  */
+		;
+	      else if (c == '1')
+		nbits = 1;
+	      else if (c == '2' || c == '3')
+		nbits = 2;
+	      else
+		nbits = 3;
+	    }
+	  else
+	    nbits += 3;
+	}
+    }
+  if (end)
+    {
+      if (c && c != end)
+	{
+	  if (bits != NULL)
+	    *bits = -1;
+	  return 0;
+	}
+    }
+  else
+    --p;
+
+  *pp = p;
+  if (overflow)
+    {
+      if (nbits == 0)
+	{
+	  /* Large decimal constants are an error (because it is hard to
+	     count how many bits are in them).  */
+	  if (bits != NULL)
+	    *bits = -1;
+	  return 0;
+	}
+      
+      /* -0x7f is the same as 0x80.  So deal with it by adding one to
+	 the number of bits.  */
+      if (sign == -1)
+	++nbits;
+      if (bits)
+	*bits = nbits;
+    }
+  else
+    {
+      if (bits)
+	*bits = 0;
+      return n * sign;
+    }
+  /* It's *BITS which has the interesting information.  */
+  return 0;
+}
+
+static struct type *
+read_range_type (pp, typenums, objfile)
+     char **pp;
+     int typenums[2];
+     struct objfile *objfile;
+{
+  char *orig_pp = *pp;
+  int rangenums[2];
+  long n2, n3;
+  int n2bits, n3bits;
+  int self_subrange;
+  struct type *result_type;
+  struct type *index_type = NULL;
+
+  /* First comes a type we are a subrange of.
+     In C it is usually 0, 1 or the type being defined.  */
+  if (read_type_number (pp, rangenums) != 0)
+    return error_type (pp, objfile);
+  self_subrange = (rangenums[0] == typenums[0] &&
+		   rangenums[1] == typenums[1]);
+
+  if (**pp == '=')
+    {
+      *pp = orig_pp;
+      index_type = read_type (pp, objfile);
+    }
+
+  /* A semicolon should now follow; skip it.  */
+  if (**pp == ';')
+    (*pp)++;
+
+  /* The remaining two operands are usually lower and upper bounds
+     of the range.  But in some special cases they mean something else.  */
+  n2 = read_huge_number (pp, ';', &n2bits);
+  n3 = read_huge_number (pp, ';', &n3bits);
+
+  if (n2bits == -1 || n3bits == -1)
+    return error_type (pp, objfile);
+
+  if (index_type)
+    goto handle_true_range;
+
+  /* If limits are huge, must be large integral type.  */
+  if (n2bits != 0 || n3bits != 0)
+    {
+      char got_signed = 0;
+      char got_unsigned = 0;
+      /* Number of bits in the type.  */
+      int nbits = 0;
+
+      /* Range from 0 to <large number> is an unsigned large integral type.  */
+      if ((n2bits == 0 && n2 == 0) && n3bits != 0)
+	{
+	  got_unsigned = 1;
+	  nbits = n3bits;
+	}
+      /* Range from <large number> to <large number>-1 is a large signed
+	 integral type.  Take care of the case where <large number> doesn't
+	 fit in a long but <large number>-1 does.  */
+      else if ((n2bits != 0 && n3bits != 0 && n2bits == n3bits + 1)
+	       || (n2bits != 0 && n3bits == 0
+		   && (n2bits == sizeof (long) * HOST_CHAR_BIT)
+		   && n3 == LONG_MAX))
+	{
+	  got_signed = 1;
+	  nbits = n2bits;
+	}
+
+      if (got_signed || got_unsigned)
+	{
+	  return init_type (TYPE_CODE_INT, nbits / TARGET_CHAR_BIT,
+			    got_unsigned ? TYPE_FLAG_UNSIGNED : 0, NULL,
+			    objfile);
+	}
+      else
+	return error_type (pp, objfile);
+    }
+
+  /* A type defined as a subrange of itself, with bounds both 0, is void.  */
+  if (self_subrange && n2 == 0 && n3 == 0)
+    return init_type (TYPE_CODE_VOID, 1, 0, NULL, objfile);
+
+  /* If n3 is zero and n2 is positive, we want a floating type, and n2
+     is the width in bytes.
+
+     Fortran programs appear to use this for complex types also.  To
+     distinguish between floats and complex, g77 (and others?)  seem
+     to use self-subranges for the complexes, and subranges of int for
+     the floats.
+
+     Also note that for complexes, g77 sets n2 to the size of one of
+     the member floats, not the whole complex beast.  My guess is that
+     this was to work well with pre-COMPLEX versions of gdb. */
+
+  if (n3 == 0 && n2 > 0)
+    {
+      if (self_subrange)
+	{
+	  return init_type (TYPE_CODE_COMPLEX, 2 * n2, 0, NULL, objfile);
+	}
+      else
+	{
+	  return init_type (TYPE_CODE_FLT, n2, 0, NULL, objfile);
+	}
+    }
+
+  /* If the upper bound is -1, it must really be an unsigned int.  */
+
+  else if (n2 == 0 && n3 == -1)
+    {
+      /* It is unsigned int or unsigned long.  */
+      /* GCC 2.3.3 uses this for long long too, but that is just a GDB 3.5
+	 compatibility hack.  */
+      return init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+			TYPE_FLAG_UNSIGNED, NULL, objfile);
+    }
+
+  /* Special case: char is defined (Who knows why) as a subrange of
+     itself with range 0-127.  */
+  else if (self_subrange && n2 == 0 && n3 == 127)
+    return init_type (TYPE_CODE_INT, 1, 0, NULL, objfile);
+
+  else if (current_symbol && SYMBOL_LANGUAGE (current_symbol) == language_chill
+	   && !self_subrange)
+    goto handle_true_range;
+
+  /* We used to do this only for subrange of self or subrange of int.  */
+  else if (n2 == 0)
+    {
+      if (n3 < 0)
+	/* n3 actually gives the size.  */
+	return init_type (TYPE_CODE_INT, - n3, TYPE_FLAG_UNSIGNED,
+			  NULL, objfile);
+      if (n3 == 0xff)
+	return init_type (TYPE_CODE_INT, 1, TYPE_FLAG_UNSIGNED, NULL, objfile);
+      if (n3 == 0xffff)
+	return init_type (TYPE_CODE_INT, 2, TYPE_FLAG_UNSIGNED, NULL, objfile);
+
+      /* -1 is used for the upper bound of (4 byte) "unsigned int" and
+	 "unsigned long", and we already checked for that,
+	 so don't need to test for it here.  */
+    }
+  /* I think this is for Convex "long long".  Since I don't know whether
+     Convex sets self_subrange, I also accept that particular size regardless
+     of self_subrange.  */
+  else if (n3 == 0 && n2 < 0
+	   && (self_subrange
+	       || n2 == - TARGET_LONG_LONG_BIT / TARGET_CHAR_BIT))
+    return init_type (TYPE_CODE_INT, - n2, 0, NULL, objfile);
+  else if (n2 == -n3 -1)
+    {
+      if (n3 == 0x7f)
+	return init_type (TYPE_CODE_INT, 1, 0, NULL, objfile);
+      if (n3 == 0x7fff)
+	return init_type (TYPE_CODE_INT, 2, 0, NULL, objfile);
+      if (n3 == 0x7fffffff)
+	return init_type (TYPE_CODE_INT, 4, 0, NULL, objfile);
+    }
+
+  /* We have a real range type on our hands.  Allocate space and
+     return a real pointer.  */
+ handle_true_range:
+
+  if (self_subrange)
+    index_type = builtin_type_int;
+  else
+    index_type = *dbx_lookup_type (rangenums);
+  if (index_type == NULL)
+    {
+      /* Does this actually ever happen?  Is that why we are worrying
+         about dealing with it rather than just calling error_type?  */
+
+      static struct type *range_type_index;
+
+      complain (&range_type_base_complaint, rangenums[1]);
+      if (range_type_index == NULL)
+	range_type_index =
+	  init_type (TYPE_CODE_INT, TARGET_INT_BIT / TARGET_CHAR_BIT,
+		     0, "range type index type", NULL);
+      index_type = range_type_index;
+    }
+
+  result_type = create_range_type ((struct type *) NULL, index_type, n2, n3);
+  return (result_type);
+}
+
+/* Read in an argument list.  This is a list of types, separated by commas
+   and terminated with END.  Return the list of types read in, or (struct type
+   **)-1 if there is an error.  */
+
+static struct type **
+read_args (pp, end, objfile)
+     char **pp;
+     int end;
+     struct objfile *objfile;
+{
+  /* FIXME!  Remove this arbitrary limit!  */
+  struct type *types[1024], **rval; /* allow for fns of 1023 parameters */
+  int n = 0;
+
+  while (**pp != end)
+    {
+      if (**pp != ',')
+	/* Invalid argument list: no ','.  */
+	return (struct type **)-1;
+      (*pp)++;
+      STABS_CONTINUE (pp, objfile);
+      types[n++] = read_type (pp, objfile);
+    }
+  (*pp)++;			/* get past `end' (the ':' character) */
+
+  if (n == 1)
+    {
+      rval = (struct type **) xmalloc (2 * sizeof (struct type *));
+    }
+  else if (TYPE_CODE (types[n-1]) != TYPE_CODE_VOID)
+    {
+      rval = (struct type **) xmalloc ((n + 1) * sizeof (struct type *));
+      memset (rval + n, 0, sizeof (struct type *));
+    }
+  else
+    {
+      rval = (struct type **) xmalloc (n * sizeof (struct type *));
+    }
+  memcpy (rval, types, n * sizeof (struct type *));
+  return rval;
+}
+
+/* Common block handling.  */
+
+/* List of symbols declared since the last BCOMM.  This list is a tail
+   of local_symbols.  When ECOMM is seen, the symbols on the list
+   are noted so their proper addresses can be filled in later,
+   using the common block base address gotten from the assembler
+   stabs.  */
+
+static struct pending *common_block;
+static int common_block_i;
+
+/* Name of the current common block.  We get it from the BCOMM instead of the
+   ECOMM to match IBM documentation (even though IBM puts the name both places
+   like everyone else).  */
+static char *common_block_name;
+
+/* Process a N_BCOMM symbol.  The storage for NAME is not guaranteed
+   to remain after this function returns.  */
+
+void
+common_block_start (name, objfile)
+     char *name;
+     struct objfile *objfile;
+{
+  if (common_block_name != NULL)
+    {
+      static struct complaint msg = {
+	"Invalid symbol data: common block within common block",
+	0, 0};
+      complain (&msg);
+    }
+  common_block = local_symbols;
+  common_block_i = local_symbols ? local_symbols->nsyms : 0;
+  common_block_name = obsavestring (name, strlen (name),
+				    &objfile -> symbol_obstack);
+}
+
+/* Process a N_ECOMM symbol.  */
+
+void
+common_block_end (objfile)
+     struct objfile *objfile;
+{
+  /* Symbols declared since the BCOMM are to have the common block
+     start address added in when we know it.  common_block and
+     common_block_i point to the first symbol after the BCOMM in
+     the local_symbols list; copy the list and hang it off the
+     symbol for the common block name for later fixup.  */
+  int i;
+  struct symbol *sym;
+  struct pending *new = 0;
+  struct pending *next;
+  int j;
+
+  if (common_block_name == NULL)
+    {
+      static struct complaint msg = {"ECOMM symbol unmatched by BCOMM", 0, 0};
+      complain (&msg);
+      return;
+    }
+
+  sym = (struct symbol *) 
+    obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symbol));
+  memset (sym, 0, sizeof (struct symbol));
+  /* Note: common_block_name already saved on symbol_obstack */
+  SYMBOL_NAME (sym) = common_block_name;
+  SYMBOL_CLASS (sym) = LOC_BLOCK;
+
+  /* Now we copy all the symbols which have been defined since the BCOMM.  */
+
+  /* Copy all the struct pendings before common_block.  */
+  for (next = local_symbols;
+       next != NULL && next != common_block;
+       next = next->next)
+    {
+      for (j = 0; j < next->nsyms; j++)
+	add_symbol_to_list (next->symbol[j], &new);
+    }
+
+  /* Copy however much of COMMON_BLOCK we need.  If COMMON_BLOCK is
+     NULL, it means copy all the local symbols (which we already did
+     above).  */
+
+  if (common_block != NULL)
+    for (j = common_block_i; j < common_block->nsyms; j++)
+      add_symbol_to_list (common_block->symbol[j], &new);
+
+  SYMBOL_TYPE (sym) = (struct type *) new;
+
+  /* Should we be putting local_symbols back to what it was?
+     Does it matter?  */
+
+  i = hashname (SYMBOL_NAME (sym));
+  SYMBOL_VALUE_CHAIN (sym) = global_sym_chain[i];
+  global_sym_chain[i] = sym;
+  common_block_name = NULL;
+}
+
+/* Add a common block's start address to the offset of each symbol
+   declared to be in it (by being between a BCOMM/ECOMM pair that uses
+   the common block name).  */
+
+static void
+fix_common_block (sym, valu)
+    struct symbol *sym;
+    int valu;
+{
+  struct pending *next = (struct pending *) SYMBOL_TYPE (sym);
+  for ( ; next; next = next->next)
+    {
+      register int j;
+      for (j = next->nsyms - 1; j >= 0; j--)
+	SYMBOL_VALUE_ADDRESS (next->symbol[j]) += valu;
+    }
+}
+
+
+
+/* What about types defined as forward references inside of a small lexical
+   scope?  */
+/* Add a type to the list of undefined types to be checked through
+   once this file has been read in.  */
+
+void
+add_undefined_type (type)
+     struct type *type;
+{
+  if (undef_types_length == undef_types_allocated)
+    {
+      undef_types_allocated *= 2;
+      undef_types = (struct type **)
+	xrealloc ((char *) undef_types,
+		  undef_types_allocated * sizeof (struct type *));
+    }
+  undef_types[undef_types_length++] = type;
+}
+
+/* Go through each undefined type, see if it's still undefined, and fix it
+   up if possible.  We have two kinds of undefined types:
+
+   TYPE_CODE_ARRAY:  Array whose target type wasn't defined yet.
+			Fix:  update array length using the element bounds
+			and the target type's length.
+   TYPE_CODE_STRUCT, TYPE_CODE_UNION:  Structure whose fields were not
+			yet defined at the time a pointer to it was made.
+   			Fix:  Do a full lookup on the struct/union tag.  */
+void
+cleanup_undefined_types ()
+{
+  struct type **type;
+
+  for (type = undef_types; type < undef_types + undef_types_length; type++)
+    {
+      switch (TYPE_CODE (*type))
+	{
+
+	  case TYPE_CODE_STRUCT:
+	  case TYPE_CODE_UNION:
+	  case TYPE_CODE_ENUM:
+	  {
+	    /* Check if it has been defined since.  Need to do this here
+	       as well as in check_typedef to deal with the (legitimate in
+	       C though not C++) case of several types with the same name
+	       in different source files.  */
+	    if (TYPE_FLAGS (*type) & TYPE_FLAG_STUB)
+	      {
+		struct pending *ppt;
+		int i;
+		/* Name of the type, without "struct" or "union" */
+		char *typename = TYPE_TAG_NAME (*type);
+
+		if (typename == NULL)
+		  {
+		    static struct complaint msg = {"need a type name", 0, 0};
+		    complain (&msg);
+		    break;
+		  }
+		for (ppt = file_symbols; ppt; ppt = ppt->next)
+		  {
+		    for (i = 0; i < ppt->nsyms; i++)
+		      {
+			struct symbol *sym = ppt->symbol[i];
+			
+			if (SYMBOL_CLASS (sym) == LOC_TYPEDEF
+			    && SYMBOL_NAMESPACE (sym) == STRUCT_NAMESPACE
+			    && (TYPE_CODE (SYMBOL_TYPE (sym)) ==
+				TYPE_CODE (*type))
+			    && STREQ (SYMBOL_NAME (sym), typename))
+			  {
+			    memcpy (*type, SYMBOL_TYPE (sym),
+				    sizeof (struct type));
+			  }
+		      }
+		  }
+	      }
+	  }
+	  break;
+
+	default:
+	  {
+	    static struct complaint msg = {"\
+GDB internal error.  cleanup_undefined_types with bad type %d.", 0, 0};
+	    complain (&msg, TYPE_CODE (*type));
+	  }
+	  break;
+	}
+    }
+
+  undef_types_length = 0;
+}
+
+/* Scan through all of the global symbols defined in the object file,
+   assigning values to the debugging symbols that need to be assigned
+   to.  Get these symbols from the minimal symbol table.  */
+
+void
+scan_file_globals (objfile)
+     struct objfile *objfile;
+{
+  int hash;
+  struct minimal_symbol *msymbol;
+  struct symbol *sym, *prev, *rsym;
+  struct objfile *resolve_objfile;
+
+  /* SVR4 based linkers copy referenced global symbols from shared
+     libraries to the main executable.
+     If we are scanning the symbols for a shared library, try to resolve
+     them from the minimal symbols of the main executable first.  */
+
+  if (symfile_objfile && objfile != symfile_objfile)
+    resolve_objfile = symfile_objfile;
+  else
+    resolve_objfile = objfile;
+
+  while (1)
+    {
+      /* Avoid expensive loop through all minimal symbols if there are
+	 no unresolved symbols.  */
+      for (hash = 0; hash < HASHSIZE; hash++)
+	{
+	  if (global_sym_chain[hash])
+	    break;
+	}
+      if (hash >= HASHSIZE)
+	return;
+
+      for (msymbol = resolve_objfile -> msymbols;
+	   msymbol && SYMBOL_NAME (msymbol) != NULL;
+	   msymbol++)
+	{
+	  QUIT;
+
+	  /* Skip static symbols.  */
+	  switch (MSYMBOL_TYPE (msymbol))
+	    {
+	    case mst_file_text:
+	    case mst_file_data:
+	    case mst_file_bss:
+	      continue;
+	    default:
+	      break;
+	    }
+
+	  prev = NULL;
+
+	  /* Get the hash index and check all the symbols
+	     under that hash index. */
+
+	  hash = hashname (SYMBOL_NAME (msymbol));
+
+	  for (sym = global_sym_chain[hash]; sym;)
+	    {
+	      if (SYMBOL_NAME (msymbol)[0] == SYMBOL_NAME (sym)[0] &&
+		  STREQ(SYMBOL_NAME (msymbol) + 1, SYMBOL_NAME (sym) + 1))
+		{
+
+		  struct alias_list *aliases;
+
+		  /* Splice this symbol out of the hash chain and
+		     assign the value we have to it. */
+		  if (prev)
+		    {
+		      SYMBOL_VALUE_CHAIN (prev) = SYMBOL_VALUE_CHAIN (sym);
+		    }
+		  else
+		    {
+		      global_sym_chain[hash] = SYMBOL_VALUE_CHAIN (sym);
+		    }
+		  
+		  /* Check to see whether we need to fix up a common block.  */
+		  /* Note: this code might be executed several times for
+		     the same symbol if there are multiple references.  */
+
+		  /* If symbol has aliases, do minimal symbol fixups for each.
+		     These live aliases/references weren't added to 
+		     global_sym_chain hash but may also need to be fixed up. */
+		  /* FIXME: Maybe should have added aliases to the global chain,		     resolved symbol name, then treated aliases as normal 
+		     symbols?  Still, we wouldn't want to add_to_list. */
+		  /* Now do the same for each alias of this symbol */
+		  rsym = sym;
+		  aliases = SYMBOL_ALIASES (sym);
+		  while (rsym)
+		    {
+		      if (SYMBOL_CLASS (rsym) == LOC_BLOCK)
+			{
+			  fix_common_block (rsym,
+					    SYMBOL_VALUE_ADDRESS (msymbol));
+			}
+		      else
+			{
+			  SYMBOL_VALUE_ADDRESS (rsym)
+			    = SYMBOL_VALUE_ADDRESS (msymbol);
+			}
+		      SYMBOL_SECTION (rsym) = SYMBOL_SECTION (msymbol);
+		      if (aliases)
+			{
+			  rsym = aliases->sym;
+			  aliases = aliases->next;
+			}
+		      else
+			rsym = NULL;
+		    }
+
+		  
+		  if (prev)
+		    {
+		      sym = SYMBOL_VALUE_CHAIN (prev);
+		    }
+		  else
+		    {
+		      sym = global_sym_chain[hash];
+		    }
+		}
+	      else
+		{
+		  prev = sym;
+		  sym = SYMBOL_VALUE_CHAIN (sym);
+		}
+	    }
+	}
+      if (resolve_objfile == objfile)
+	break;
+      resolve_objfile = objfile;
+    }
+
+  /* Change the storage class of any remaining unresolved globals to
+     LOC_UNRESOLVED and remove them from the chain.  */
+  for (hash = 0; hash < HASHSIZE; hash++)
+    {
+      sym = global_sym_chain[hash];
+      while (sym)
+	{
+	  prev = sym;
+	  sym = SYMBOL_VALUE_CHAIN (sym);
+
+	  /* Change the symbol address from the misleading chain value
+	     to address zero.  */
+	  SYMBOL_VALUE_ADDRESS (prev) = 0;
+
+	  /* Complain about unresolved common block symbols.  */
+	  if (SYMBOL_CLASS (prev) == LOC_STATIC)
+	    SYMBOL_CLASS (prev) = LOC_UNRESOLVED;
+	  else
+	    complain (&unresolved_sym_chain_complaint,
+		      objfile -> name, SYMBOL_NAME (prev));
+	}
+    }
+  memset (global_sym_chain, 0, sizeof (global_sym_chain));
+}
+
+/* Initialize anything that needs initializing when starting to read
+   a fresh piece of a symbol file, e.g. reading in the stuff corresponding
+   to a psymtab.  */
+
+void
+stabsread_init ()
+{
+}
+
+/* Initialize anything that needs initializing when a completely new
+   symbol file is specified (not just adding some symbols from another
+   file, e.g. a shared library).  */
+
+void
+stabsread_new_init ()
+{
+  /* Empty the hash table of global syms looking for values.  */
+  memset (global_sym_chain, 0, sizeof (global_sym_chain));
+}
+
+/* Initialize anything that needs initializing at the same time as
+   start_symtab() is called. */
+
+void start_stabs ()
+{
+  global_stabs = NULL;		/* AIX COFF */
+  /* Leave FILENUM of 0 free for builtin types and this file's types.  */
+  n_this_object_header_files = 1;
+  type_vector_length = 0;
+  type_vector = (struct type **) 0;
+
+  /* FIXME: If common_block_name is not already NULL, we should complain().  */
+  common_block_name = NULL;
+
+  os9k_stabs = 0;
+}
+
+/* Call after end_symtab() */
+
+void end_stabs ()
+{
+  if (type_vector)
+    {
+      free ((char *) type_vector);
+    }
+  type_vector = 0;
+  type_vector_length = 0;
+  previous_stab_code = 0;
+}
+
+void
+finish_global_stabs (objfile)
+     struct objfile *objfile;
+{
+  if (global_stabs)
+    {
+      patch_block_stabs (global_symbols, global_stabs, objfile);
+      free ((PTR) global_stabs);
+      global_stabs = NULL;
+    }
+}
+
+/* Initializer for this module */
+
+void
+_initialize_stabsread ()
+{
+  undef_types_allocated = 20;
+  undef_types_length = 0;
+  undef_types = (struct type **)
+    xmalloc (undef_types_allocated * sizeof (struct type *));
+}
diff --git a/gdb/stabsread.h b/gdb/stabsread.h
new file mode 100644
index 0000000..77ea291
--- /dev/null
+++ b/gdb/stabsread.h
@@ -0,0 +1,249 @@
+/* Include file for stabs debugging format support functions.
+   Copyright 1986-1991, 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Definitions, prototypes, etc for stabs debugging format support
+   functions.
+
+   Variables declared in this file can be defined by #define-ing
+   the name EXTERN to null.  It is used to declare variables that
+   are normally extern, but which get defined in a single module
+   using this technique.  */
+
+#ifndef EXTERN
+#define	EXTERN extern
+#endif
+
+/* Convert stab register number (from `r' declaration) to a gdb REGNUM.  */
+
+#ifndef STAB_REG_TO_REGNUM
+#define STAB_REG_TO_REGNUM(VALUE) (VALUE)
+#endif
+
+/* Hash table of global symbols whose values are not known yet.
+   They are chained thru the SYMBOL_VALUE_CHAIN, since we don't
+   have the correct data for that slot yet.
+
+   The use of the LOC_BLOCK code in this chain is nonstandard--
+   it refers to a FORTRAN common block rather than the usual meaning, and
+   the such LOC_BLOCK symbols use their fields in nonstandard ways.  */
+
+EXTERN struct symbol *global_sym_chain[HASHSIZE];
+
+extern void common_block_start PARAMS ((char *, struct objfile *));
+extern void common_block_end PARAMS ((struct objfile *));
+
+/* Kludge for xcoffread.c */
+
+struct pending_stabs
+{
+  int count;
+  int length;
+  char *stab[1];
+};
+
+EXTERN struct pending_stabs *global_stabs;
+
+/* The type code that process_one_symbol saw on its previous invocation.
+   Used to detect pairs of N_SO symbols. */
+
+EXTERN int previous_stab_code;
+
+/* Support for Sun changes to dbx symbol format */
+
+/* For each identified header file, we have a table of types defined
+   in that header file.
+
+   header_files maps header file names to their type tables.
+   It is a vector of n_header_files elements.
+   Each element describes one header file.
+   It contains a vector of types.
+
+   Sometimes it can happen that the same header file produces
+   different results when included in different places.
+   This can result from conditionals or from different
+   things done before including the file.
+   When this happens, there are multiple entries for the file in this table,
+   one entry for each distinct set of results.
+   The entries are distinguished by the INSTANCE field.
+   The INSTANCE field appears in the N_BINCL and N_EXCL symbol table and is
+   used to match header-file references to their corresponding data.  */
+
+struct header_file
+{
+
+  /* Name of header file */
+  
+  char *name;
+
+  /* Numeric code distinguishing instances of one header file that produced
+     different results when included.  It comes from the N_BINCL or N_EXCL. */
+
+  int instance;
+
+  /* Pointer to vector of types */
+
+  struct type **vector;
+
+  /* Allocated length (# elts) of that vector */
+
+  int length;
+
+};
+
+/* The table of header_files of this OBJFILE. */
+#define HEADER_FILES(OBJFILE) (DBX_SYMFILE_INFO (OBJFILE)->header_files)
+
+/* The actual length of HEADER_FILES. */
+#define N_HEADER_FILES(OBJFILE) (DBX_SYMFILE_INFO (OBJFILE)->n_header_files)
+
+/* The allocated lengh of HEADER_FILES. */
+#define N_ALLOCATED_HEADER_FILES(OBJFILE) \
+  (DBX_SYMFILE_INFO (OBJFILE)->n_allocated_header_files)
+
+/* Within each object file, various header files are assigned numbers.
+   A type is defined or referred to with a pair of numbers
+   (FILENUM,TYPENUM) where FILENUM is the number of the header file
+   and TYPENUM is the number within that header file.
+   TYPENUM is the index within the vector of types for that header file.
+
+   FILENUM == 0 is special; it refers to the main source of the object file,
+   and not to any header file.  FILENUM != 1 is interpreted by looking it up
+   in the following table, which contains indices in header_files.  */
+
+EXTERN int *this_object_header_files;
+
+EXTERN int n_this_object_header_files;
+
+EXTERN int n_allocated_this_object_header_files;
+
+extern struct complaint unknown_symtype_complaint;
+extern struct complaint unknown_symchar_complaint;
+
+extern struct type *
+read_type PARAMS ((char **, struct objfile *));
+
+extern void
+cleanup_undefined_types PARAMS ((void));
+
+extern struct type **
+dbx_lookup_type PARAMS ((int [2]));
+
+extern long
+read_number PARAMS ((char **, int));
+
+extern void
+add_undefined_type PARAMS ((struct type *));
+
+extern struct symbol *
+define_symbol PARAMS ((CORE_ADDR, char *, int, int, struct objfile *));
+
+extern void
+stabsread_init PARAMS ((void));
+
+extern void
+stabsread_new_init PARAMS ((void));
+
+extern void
+start_stabs PARAMS ((void));
+
+extern void
+end_stabs PARAMS ((void));
+
+extern void
+finish_global_stabs PARAMS ((struct objfile *objfile));
+
+
+EXTERN int os9k_stabs;
+
+/* COFF files can have multiple .stab sections, if they are linked
+   using --split-by-reloc.  This linked list is used to pass the
+   information into the functions in dbxread.c.  */
+struct stab_section_list
+{
+  /* Next in list.  */
+  struct stab_section_list *next;
+
+  /* Stab section.  */
+  asection *section;
+};
+
+/* Functions exported by dbxread.c.  These are not in stabsread.c because
+   they are only used by some stabs readers.  */
+
+extern struct partial_symtab *
+start_psymtab PARAMS ((struct objfile *, struct section_offsets *, char *,
+		       CORE_ADDR, int, struct partial_symbol **,
+		       struct partial_symbol **));
+
+extern struct partial_symtab *
+end_psymtab PARAMS ((struct partial_symtab *pst,
+		     char **include_list,
+		     int num_includes,
+		     int capping_symbol_offset,
+		     CORE_ADDR capping_text,
+		     struct partial_symtab **dependency_list,
+		     int number_dependencies,
+		     int textlow_not_set));
+
+extern void
+process_one_symbol PARAMS ((int, int, CORE_ADDR, char *,
+			    struct section_offsets *, struct objfile *));
+
+extern void elfstab_build_psymtabs
+  PARAMS ((struct objfile *objfile,
+	   struct section_offsets *section_offsets,
+	   int mainline,
+	   file_ptr staboff, unsigned int stabsize,
+	   file_ptr stabstroffset,
+	   unsigned int stabstrsize));
+
+extern void coffstab_build_psymtabs
+  PARAMS ((struct objfile *objfile,
+	   struct section_offsets *section_offsets,
+	   int mainline,
+	   CORE_ADDR textaddr, unsigned int textsize,
+	   struct stab_section_list *stabs,
+	   file_ptr stabstroffset,
+	   unsigned int stabstrsize));
+
+extern void stabsect_build_psymtabs
+  PARAMS ((struct objfile *objfile,
+	   struct section_offsets *section_offsets,
+	   int mainline,
+	   char *stab_name,
+	   char *stabstr_name,
+	   char *text_name));
+
+extern void elfstab_offset_sections PARAMS ((struct objfile *,
+					     struct partial_symtab *));
+
+extern void process_later 
+  PARAMS ((struct symbol *, char *, 
+	   int (*f) PARAMS ((struct objfile *, struct symbol *, char *))));
+
+extern int symbol_reference_defined PARAMS ((char **));
+
+extern void ref_add PARAMS ((int, struct symbol *, char *, CORE_ADDR));
+
+extern struct symbol * ref_search PARAMS ((int));
+
+extern int resolve_cfront_continuation 
+  PARAMS ((struct objfile * objfile, struct symbol * sym, char * p));
+
+#undef EXTERN
diff --git a/gdb/stack.c b/gdb/stack.c
new file mode 100644
index 0000000..e36316e
--- /dev/null
+++ b/gdb/stack.c
@@ -0,0 +1,2019 @@
+/* Print and select stack frames for GDB, the GNU debugger.
+   Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 98, 1999
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <ctype.h>
+#include "defs.h"
+#include "gdb_string.h"
+#include "value.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "language.h"
+#include "frame.h"
+#include "gdbcmd.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "demangle.h"
+#include "inferior.h"
+#include "annotate.h"
+#include "symfile.h"
+#include "objfiles.h"
+
+/* Prototypes for exported functions. */
+
+void args_info PARAMS ((char *, int));
+
+void locals_info PARAMS ((char *, int));
+
+void (*selected_frame_level_changed_hook) PARAMS ((int));
+
+void _initialize_stack PARAMS ((void));
+
+/* Prototypes for local functions. */
+
+static void return_command PARAMS ((char *, int));
+
+static void down_command PARAMS ((char *, int));
+
+static void down_silently_base PARAMS ((char *));
+
+static void down_silently_command PARAMS ((char *, int));
+
+static void up_command PARAMS ((char *, int));
+
+static void up_silently_base PARAMS ((char *));
+
+static void up_silently_command PARAMS ((char *, int));
+
+void frame_command PARAMS ((char *, int));
+
+static void select_frame_command PARAMS ((char *, int));
+
+static void print_frame_arg_vars PARAMS ((struct frame_info *, GDB_FILE *));
+
+static void catch_info PARAMS ((char *, int));
+
+static void args_plus_locals_info PARAMS ((char *, int));
+
+static void print_frame_label_vars PARAMS ((struct frame_info *,
+					    int,
+					    GDB_FILE *));
+
+static void print_frame_local_vars PARAMS ((struct frame_info *,
+					    int,
+					    GDB_FILE *));
+
+static int print_block_frame_labels PARAMS ((struct block *, int *,
+					     GDB_FILE *));
+
+static int print_block_frame_locals PARAMS ((struct block *,
+					     struct frame_info *,
+					     int,
+					     GDB_FILE *));
+
+static void print_frame_info_base PARAMS ((struct frame_info *, int, int, int));
+  
+static void print_stack_frame_base PARAMS ((struct frame_info *, int, int));
+
+static void backtrace_command PARAMS ((char *, int));
+
+struct frame_info *parse_frame_specification PARAMS ((char *));
+
+static void frame_info PARAMS ((char *, int));
+
+extern int addressprint;	/* Print addresses, or stay symbolic only? */
+extern int info_verbose;	/* Verbosity of symbol reading msgs */
+extern int lines_to_list;	/* # of lines "list" command shows by default */
+
+/* The "selected" stack frame is used by default for local and arg access.
+   May be zero, for no selected frame.  */
+
+struct frame_info *selected_frame;
+
+/* Level of the selected frame:
+   0 for innermost, 1 for its caller, ...
+   or -1 for frame specified by address with no defined level.  */
+
+int selected_frame_level;
+
+/* Zero means do things normally; we are interacting directly with the
+   user.  One means print the full filename and linenumber when a
+   frame is printed, and do so in a format emacs18/emacs19.22 can
+   parse.  Two means print similar annotations, but in many more
+   cases and in a slightly different syntax.  */
+
+int annotation_level = 0;
+
+
+struct print_stack_frame_args {
+  struct frame_info *fi;
+  int level;
+  int source;
+  int args;
+};
+
+static int print_stack_frame_base_stub PARAMS ((char *));
+
+/* Show and print the frame arguments.
+   Pass the args the way catch_errors wants them.  */
+static int
+show_and_print_stack_frame_stub (args)
+     char *args;
+{
+  struct print_stack_frame_args *p = (struct print_stack_frame_args *)args;
+
+  /* Reversed order of these so tuiDo() doesn't occur
+   * in the middle of "Breakpoint 1 ... [location]" printing = RT
+   */
+  if (tui_version)
+    print_frame_info_base (p->fi, p->level, p->source, p->args);
+  print_frame_info (p->fi, p->level, p->source, p->args);
+
+  return 0;
+}
+
+/* Show or print the frame arguments.
+   Pass the args the way catch_errors wants them.  */
+static int
+print_stack_frame_stub (args)
+     char *args;
+{
+  struct print_stack_frame_args *p = (struct print_stack_frame_args *)args;
+
+  if (tui_version)
+    print_frame_info (p->fi, p->level, p->source, p->args);
+  else
+    print_frame_info_base (p->fi, p->level, p->source, p->args);
+  return 0;
+}
+
+/* Print a stack frame briefly.  FRAME_INFI should be the frame info
+   and LEVEL should be its level in the stack (or -1 for level not
+   defined). */
+
+/* Pass the args the way catch_errors wants them.  */
+static int
+print_stack_frame_base_stub (args)
+     char *args;
+{
+  struct print_stack_frame_args *p = (struct print_stack_frame_args *)args;
+
+  print_frame_info_base (p->fi, p->level, p->source, p->args);
+  return 0;
+}
+
+/* print the frame arguments to the terminal.  
+   Pass the args the way catch_errors wants them.  */
+static int
+print_only_stack_frame_stub (args)
+     char *args;
+{
+  struct print_stack_frame_args *p = (struct print_stack_frame_args *)args;
+
+  print_frame_info_base (p->fi, p->level, p->source, p->args);
+  return 0;
+}
+
+/* Print a stack frame briefly.  FRAME_INFI should be the frame info
+   and LEVEL should be its level in the stack (or -1 for level not defined).
+   This prints the level, the function executing, the arguments,
+   and the file name and line number.
+   If the pc is not at the beginning of the source line,
+   the actual pc is printed at the beginning.
+
+   If SOURCE is 1, print the source line as well.
+   If SOURCE is -1, print ONLY the source line.  */
+
+static void
+print_stack_frame_base (fi, level, source)
+     struct frame_info *fi;
+     int level;
+     int source;
+{
+  struct print_stack_frame_args args;
+
+  args.fi = fi;
+  args.level = level;
+  args.source = source;
+  args.args = 1;
+
+  catch_errors (print_stack_frame_stub, (char *)&args, "", RETURN_MASK_ALL);
+}
+
+/* Show and print a stack frame briefly.  FRAME_INFI should be the frame info
+   and LEVEL should be its level in the stack (or -1 for level not defined).
+   This prints the level, the function executing, the arguments,
+   and the file name and line number.
+   If the pc is not at the beginning of the source line,
+   the actual pc is printed at the beginning.
+
+   If SOURCE is 1, print the source line as well.
+   If SOURCE is -1, print ONLY the source line.  */
+
+void
+show_and_print_stack_frame (fi, level, source)
+     struct frame_info *fi;
+     int level;
+     int source;
+{
+  struct print_stack_frame_args args;
+
+  args.fi = fi;
+  args.level = level;
+  args.source = source;
+  args.args = 1;
+
+  catch_errors (show_and_print_stack_frame_stub, (char *)&args, "", RETURN_MASK_ALL);
+}
+
+
+/* Show or print a stack frame briefly.  FRAME_INFI should be the frame info
+   and LEVEL should be its level in the stack (or -1 for level not defined).
+   This prints the level, the function executing, the arguments,
+   and the file name and line number.
+   If the pc is not at the beginning of the source line,
+   the actual pc is printed at the beginning.
+
+   If SOURCE is 1, print the source line as well.
+   If SOURCE is -1, print ONLY the source line.  */
+
+void
+print_stack_frame (fi, level, source)
+     struct frame_info *fi;
+     int level;
+     int source;
+{
+  struct print_stack_frame_args args;
+
+  args.fi = fi;
+  args.level = level;
+  args.source = source;
+  args.args = 1;
+
+  catch_errors (print_stack_frame_stub, (char *)&args, "", RETURN_MASK_ALL);
+}
+
+/* Print a stack frame briefly.  FRAME_INFI should be the frame info
+   and LEVEL should be its level in the stack (or -1 for level not defined).
+   This prints the level, the function executing, the arguments,
+   and the file name and line number.
+   If the pc is not at the beginning of the source line,
+   the actual pc is printed at the beginning.
+
+   If SOURCE is 1, print the source line as well.
+   If SOURCE is -1, print ONLY the source line.  */
+
+void
+print_only_stack_frame (fi, level, source)
+     struct frame_info *fi;
+     int level;
+     int source;
+{
+  struct print_stack_frame_args args;
+
+  args.fi = fi;
+  args.level = level;
+  args.source = source;
+  args.args = 1;
+
+  catch_errors (print_only_stack_frame_stub, 
+                (char *)&args, "", RETURN_MASK_ALL);
+}
+
+struct print_args_args {
+  struct symbol *func;
+  struct frame_info *fi;
+};
+
+static int print_args_stub PARAMS ((PTR));
+
+/* Pass the args the way catch_errors wants them.  */
+
+static int
+print_args_stub (args)
+     PTR args;
+{
+  int numargs;
+  struct print_args_args *p = (struct print_args_args *)args;
+
+  FRAME_NUM_ARGS (numargs, (p->fi));
+  print_frame_args (p->func, p->fi, numargs, gdb_stdout);
+  return 0;
+}
+
+/* Print information about a frame for frame "fi" at level "level".
+ * Used in "where" output, also used to emit breakpoint or step messages.
+ * LEVEL is the level of the frame, or -1 if it is the innermost frame
+ * but we don't want to print the level.
+ * The meaning of the SOURCE argument is:
+ * -1: Print only source line
+ *  0: Print only location
+ *  1: Print location and source line
+ */
+
+static void
+print_frame_info_base (fi, level, source, args)
+     struct frame_info *fi;
+     int level;
+     int source;
+     int args;
+{
+  struct symtab_and_line sal;
+  struct symbol *func;
+  register char *funname = 0;
+  enum language funlang = language_unknown;
+
+#if 0
+  char buf[MAX_REGISTER_RAW_SIZE];
+  CORE_ADDR sp;
+
+  /* On the 68k, this spends too much time in m68k_find_saved_regs.  */
+
+  /* Get the value of SP_REGNUM relative to the frame.  */
+  get_saved_register (buf, (int *)NULL, (CORE_ADDR *)NULL,
+		      FRAME_INFO_ID (fi), SP_REGNUM, (enum lval_type *)NULL);
+  sp = extract_address (buf, REGISTER_RAW_SIZE (SP_REGNUM));
+
+  /* This is not a perfect test, because if a function alloca's some
+     memory, puts some code there, and then jumps into it, then the test
+     will succeed even though there is no call dummy.  Probably best is
+     to check for a bp_call_dummy breakpoint.  */
+  if (PC_IN_CALL_DUMMY (fi->pc, sp, fi->frame))
+#else
+  if (frame_in_dummy (fi))
+#endif
+    {
+      annotate_frame_begin (level == -1 ? 0 : level, fi->pc);
+
+      /* Do this regardless of SOURCE because we don't have any source
+	 to list for this frame.  */
+      if (level >= 0)
+	printf_filtered ("#%-2d ", level);
+      annotate_function_call ();
+      printf_filtered ("<function called from gdb>\n");
+      annotate_frame_end ();
+      return;
+    }
+  if (fi->signal_handler_caller)
+    {
+      annotate_frame_begin (level == -1 ? 0 : level, fi->pc);
+
+      /* Do this regardless of SOURCE because we don't have any source
+	 to list for this frame.  */
+      if (level >= 0)
+	printf_filtered ("#%-2d ", level);
+      annotate_signal_handler_caller ();
+      printf_filtered ("<signal handler called>\n");
+      annotate_frame_end ();
+      return;
+    }
+
+  /* If fi is not the innermost frame, that normally means that fi->pc
+     points to *after* the call instruction, and we want to get the line
+     containing the call, never the next line.  But if the next frame is
+     a signal_handler_caller or a dummy frame, then the next frame was
+     not entered as the result of a call, and we want to get the line
+     containing fi->pc.  */
+  sal =
+    find_pc_line (fi->pc,
+		  fi->next != NULL
+		  && !fi->next->signal_handler_caller
+		  && !frame_in_dummy (fi->next));
+
+  func = find_pc_function (fi->pc);
+  if (func)
+    {
+      /* In certain pathological cases, the symtabs give the wrong
+	 function (when we are in the first function in a file which
+	 is compiled without debugging symbols, the previous function
+	 is compiled with debugging symbols, and the "foo.o" symbol
+	 that is supposed to tell us where the file with debugging symbols
+	 ends has been truncated by ar because it is longer than 15
+	 characters).  This also occurs if the user uses asm() to create
+	 a function but not stabs for it (in a file compiled -g).
+
+	 So look in the minimal symbol tables as well, and if it comes
+	 up with a larger address for the function use that instead.
+	 I don't think this can ever cause any problems; there shouldn't
+	 be any minimal symbols in the middle of a function; if this is
+	 ever changed many parts of GDB will need to be changed (and we'll
+	 create a find_pc_minimal_function or some such).  */
+
+      struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (fi->pc);
+      if (msymbol != NULL
+	  && (SYMBOL_VALUE_ADDRESS (msymbol) 
+	      > BLOCK_START (SYMBOL_BLOCK_VALUE (func))))
+	{
+#if 0
+	  /* There is no particular reason to think the line number
+	     information is wrong.  Someone might have just put in
+	     a label with asm() but left the line numbers alone.  */
+	  /* In this case we have no way of knowing the source file
+	     and line number, so don't print them.  */
+	  sal.symtab = 0;
+#endif
+	  /* We also don't know anything about the function besides
+	     its address and name.  */
+	  func = 0;
+	  funname = SYMBOL_NAME (msymbol);
+	  funlang = SYMBOL_LANGUAGE (msymbol);
+	}
+      else
+	{
+          /* I'd like to use SYMBOL_SOURCE_NAME() here, to display
+           * the demangled name that we already have stored in
+           * the symbol table, but we stored a version with
+           * DMGL_PARAMS turned on, and here we don't want
+           * to display parameters. So call the demangler again,
+           * with DMGL_ANSI only. RT
+           * (Yes, I know that printf_symbol_filtered() will
+           * again try to demangle the name on the fly, but
+           * the issue is that if cplus_demangle() fails here,
+           * it'll fail there too. So we want to catch the failure
+           * ("demangled==NULL" case below) here, while we still
+           * have our hands on the function symbol.)
+           */
+          char * demangled;
+	  funname = SYMBOL_NAME (func);
+	  funlang = SYMBOL_LANGUAGE (func);
+          if (funlang == language_cplus) {
+            demangled = cplus_demangle (funname, DMGL_ANSI);
+            if (demangled == NULL)
+              /* If the demangler fails, try the demangled name
+               * from the symbol table. This'll have parameters,
+               * but that's preferable to diplaying a mangled name.
+               */
+	      funname = SYMBOL_SOURCE_NAME (func);
+          }
+	}
+    }
+  else
+    {
+      struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (fi->pc);
+      if (msymbol != NULL)
+	{
+	  funname = SYMBOL_NAME (msymbol);
+	  funlang = SYMBOL_LANGUAGE (msymbol);
+	}
+    }
+
+  if (source >= 0 || !sal.symtab)
+    {
+      annotate_frame_begin (level == -1 ? 0 : level, fi->pc);
+
+      if (level >= 0)
+	printf_filtered ("#%-2d ", level);
+      if (addressprint)
+	if (fi->pc != sal.pc || !sal.symtab)
+	  {
+	    annotate_frame_address ();
+	    print_address_numeric (fi->pc, 1, gdb_stdout);
+	    annotate_frame_address_end ();
+	    printf_filtered (" in ");
+	  }
+      annotate_frame_function_name ();
+      fprintf_symbol_filtered (gdb_stdout, funname ? funname : "??", funlang,
+			       DMGL_ANSI);
+      wrap_here ("   ");
+      annotate_frame_args ();
+      fputs_filtered (" (", gdb_stdout);
+      if (args)
+	{
+	  struct print_args_args args;
+	  args.fi = fi;
+	  args.func = func;
+	  catch_errors (print_args_stub, &args, "", RETURN_MASK_ALL);
+	  QUIT;
+	}
+      printf_filtered (")");
+      if (sal.symtab && sal.symtab->filename)
+	{
+	  annotate_frame_source_begin ();
+          wrap_here ("   ");
+	  printf_filtered (" at ");
+	  annotate_frame_source_file ();
+	  printf_filtered ("%s", sal.symtab->filename);
+	  annotate_frame_source_file_end ();
+	  printf_filtered (":");
+	  annotate_frame_source_line ();
+	  printf_filtered ("%d", sal.line);
+	  annotate_frame_source_end ();
+	}
+
+#ifdef PC_LOAD_SEGMENT
+     /* If we couldn't print out function name but if can figure out what
+        load segment this pc value is from, at least print out some info
+	about its load segment. */
+      if (!funname)
+	{
+	  annotate_frame_where ();
+	  wrap_here ("  ");
+	  printf_filtered (" from %s", PC_LOAD_SEGMENT (fi->pc));
+	}
+#endif
+#ifdef PC_SOLIB
+      if (!funname || (!sal.symtab || !sal.symtab->filename))
+	{
+	  char *lib = PC_SOLIB (fi->pc);
+	  if (lib)
+	    {
+	      annotate_frame_where ();
+	      wrap_here ("  ");
+	      printf_filtered (" from %s", lib);
+	    }
+	}
+#endif
+      printf_filtered ("\n");
+    }
+
+  if ((source != 0) && sal.symtab)
+    {
+      int done = 0;
+      int mid_statement = source < 0 && fi->pc != sal.pc;
+      if (annotation_level)
+	done = identify_source_line (sal.symtab, sal.line, mid_statement,
+				     fi->pc);
+      if (!done)
+	{
+	  if (addressprint && mid_statement && !tui_version)
+	    {
+	      print_address_numeric (fi->pc, 1, gdb_stdout);
+	      printf_filtered ("\t");
+	    }
+	  if (print_frame_info_listing_hook)
+	    print_frame_info_listing_hook (sal.symtab, sal.line, sal.line + 1, 0);
+	  else if (!tui_version)
+	    print_source_lines (sal.symtab, sal.line, sal.line + 1, 0);
+	}
+      current_source_line = max (sal.line - lines_to_list/2, 1);
+    }
+  if (source != 0)
+    set_default_breakpoint (1, fi->pc, sal.symtab, sal.line);
+
+  annotate_frame_end ();
+
+  gdb_flush (gdb_stdout);
+}
+
+
+void
+stack_publish_stopped_with_no_frame()
+{
+  TUIDO(((TuiOpaqueFuncPtr)tuiUpdateOnEnd));
+
+  return;
+}
+
+/* Show or print the frame info.  If this is the tui, it will be shown in 
+   the source display */
+void
+print_frame_info(fi, level, source, args)
+     struct frame_info *fi;
+     register int level;
+     int source;
+     int args;
+{
+  if (!tui_version)
+    print_frame_info_base(fi, level, source, args);
+  else
+  {
+    if (fi && (frame_in_dummy(fi) || fi->signal_handler_caller))
+      print_frame_info_base(fi, level, source, args);
+    else
+      {
+	TUIDO(((TuiOpaqueFuncPtr)tui_vShowFrameInfo, fi));
+      }
+  }
+}
+
+/* Show the frame info.  If this is the tui, it will be shown in 
+   the source display otherwise, nothing is done */
+void
+show_stack_frame(fi)
+     struct frame_info *fi;
+{
+  TUIDO(((TuiOpaqueFuncPtr)tui_vShowFrameInfo, fi));
+}
+
+
+/* Read a frame specification in whatever the appropriate format is.
+   Call error() if the specification is in any way invalid (i.e.
+   this function never returns NULL).  */
+
+struct frame_info *
+parse_frame_specification (frame_exp)
+     char *frame_exp;
+{
+  int numargs = 0;
+#define	MAXARGS	4
+  CORE_ADDR args[MAXARGS];
+  
+  if (frame_exp)
+    {
+      char *addr_string, *p;
+      struct cleanup *tmp_cleanup;
+
+      while (*frame_exp == ' ') frame_exp++;
+
+      while (*frame_exp)
+	{
+	  if (numargs > MAXARGS)
+	    error ("Too many args in frame specification");
+	  /* Parse an argument.  */
+          for (p = frame_exp; *p && *p != ' '; p++)
+	    ;
+	  addr_string = savestring(frame_exp, p - frame_exp);
+
+	  {
+	    tmp_cleanup = make_cleanup (free, addr_string);
+	    args[numargs++] = parse_and_eval_address (addr_string);
+	    do_cleanups (tmp_cleanup);
+	  }
+
+	  /* Skip spaces, move to possible next arg.  */
+	  while (*p == ' ') p++;
+	  frame_exp = p;
+	}
+    }
+
+  switch (numargs)
+    {
+    case 0:
+      if (selected_frame == NULL)
+	error ("No selected frame.");
+      return selected_frame;
+      /* NOTREACHED */
+    case 1:
+      {
+	int level = args[0];
+	struct frame_info *fid =
+	  find_relative_frame (get_current_frame (), &level);
+	struct frame_info *tfid;
+
+	if (level == 0)
+	  /* find_relative_frame was successful */
+	  return fid;
+
+	/* If SETUP_ARBITRARY_FRAME is defined, then frame specifications
+	   take at least 2 addresses.  It is important to detect this case
+	   here so that "frame 100" does not give a confusing error message
+	   like "frame specification requires two addresses".  This of course
+	   does not solve the "frame 100" problem for machines on which
+	   a frame specification can be made with one address.  To solve
+	   that, we need a new syntax for a specifying a frame by address.
+	   I think the cleanest syntax is $frame(0x45) ($frame(0x23,0x45) for
+	   two args, etc.), but people might think that is too much typing,
+	   so I guess *0x23,0x45 would be a possible alternative (commas
+	   really should be used instead of spaces to delimit; using spaces
+	   normally works in an expression).  */
+#ifdef SETUP_ARBITRARY_FRAME
+	error ("No frame %d", args[0]);
+#endif
+
+	/* If (s)he specifies the frame with an address, he deserves what
+	   (s)he gets.  Still, give the highest one that matches.  */
+
+	for (fid = get_current_frame ();
+	     fid && fid->frame != args[0];
+	     fid = get_prev_frame (fid))
+	  ;
+
+	if (fid)
+	  while ((tfid = get_prev_frame (fid)) &&
+		 (tfid->frame == args[0]))
+	    fid = tfid;
+	  
+	/* We couldn't identify the frame as an existing frame, but
+	   perhaps we can create one with a single argument.  */
+      }
+
+     default:
+#ifdef SETUP_ARBITRARY_FRAME
+      return SETUP_ARBITRARY_FRAME (numargs, args);
+#else
+      /* Usual case.  Do it here rather than have everyone supply
+	 a SETUP_ARBITRARY_FRAME that does this.  */
+      if (numargs == 1)
+	return create_new_frame (args[0], 0);
+      error ("Too many args in frame specification");
+#endif
+      /* NOTREACHED */
+    }
+  /* NOTREACHED */
+}
+
+/* FRAME_ARGS_ADDRESS_CORRECT is just like FRAME_ARGS_ADDRESS except
+   that if it is unsure about the answer, it returns 0
+   instead of guessing (this happens on the VAX and i960, for example).
+
+   On most machines, we never have to guess about the args address,
+   so FRAME_ARGS_ADDRESS{,_CORRECT} are the same.  */
+#if !defined (FRAME_ARGS_ADDRESS_CORRECT)
+#define FRAME_ARGS_ADDRESS_CORRECT FRAME_ARGS_ADDRESS
+#endif
+
+/* Print verbosely the selected frame or the frame at address ADDR.
+   This means absolutely all information in the frame is printed.  */
+
+static void
+frame_info (addr_exp, from_tty)
+     char *addr_exp;
+     int from_tty;
+{
+  struct frame_info *fi;
+  struct symtab_and_line sal;
+  struct symbol *func;
+  struct symtab *s;
+  struct frame_info *calling_frame_info;
+  int i, count, numregs;
+  char *funname = 0;
+  enum language funlang = language_unknown;
+
+  if (!target_has_stack)
+    error ("No stack.");
+
+  fi = parse_frame_specification (addr_exp);
+  if (fi == NULL)
+    error ("Invalid frame specified.");
+
+  sal = find_pc_line (fi->pc,
+		      fi->next != NULL
+		      && !fi->next->signal_handler_caller
+		      && !frame_in_dummy (fi->next));
+  func = get_frame_function (fi);
+  s = find_pc_symtab(fi->pc);
+  if (func)
+    {
+      /* I'd like to use SYMBOL_SOURCE_NAME() here, to display
+       * the demangled name that we already have stored in
+       * the symbol table, but we stored a version with
+       * DMGL_PARAMS turned on, and here we don't want
+       * to display parameters. So call the demangler again,
+       * with DMGL_ANSI only. RT
+       * (Yes, I know that printf_symbol_filtered() will
+       * again try to demangle the name on the fly, but
+       * the issue is that if cplus_demangle() fails here,
+       * it'll fail there too. So we want to catch the failure
+       * ("demangled==NULL" case below) here, while we still
+       * have our hands on the function symbol.)
+       */
+       char * demangled;
+       funname = SYMBOL_NAME (func);
+       funlang = SYMBOL_LANGUAGE (func);
+       if (funlang == language_cplus)
+	 {
+	   demangled = cplus_demangle (funname, DMGL_ANSI);
+	   /* If the demangler fails, try the demangled name
+	    * from the symbol table. This'll have parameters,
+	    * but that's preferable to diplaying a mangled name.
+	    */
+	   if (demangled == NULL)
+	     funname = SYMBOL_SOURCE_NAME (func);
+	 }
+    }
+  else
+    {
+      register struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (fi->pc);
+      if (msymbol != NULL)
+	{
+	  funname = SYMBOL_NAME (msymbol);
+	  funlang = SYMBOL_LANGUAGE (msymbol);
+	}
+    }
+  calling_frame_info = get_prev_frame (fi);
+
+  if (!addr_exp && selected_frame_level >= 0)
+    {
+      printf_filtered ("Stack level %d, frame at ", selected_frame_level);
+      print_address_numeric (fi->frame, 1, gdb_stdout);
+      printf_filtered (":\n");
+    }
+  else
+    {
+      printf_filtered ("Stack frame at ");
+      print_address_numeric (fi->frame, 1, gdb_stdout);
+      printf_filtered (":\n");
+    }
+  printf_filtered (" %s = ", REGISTER_NAME (PC_REGNUM));
+  print_address_numeric (fi->pc, 1, gdb_stdout);
+
+  wrap_here ("   ");
+  if (funname)
+    {
+      printf_filtered (" in ");
+      fprintf_symbol_filtered (gdb_stdout, funname, funlang,
+			       DMGL_ANSI | DMGL_PARAMS);
+    }
+  wrap_here ("   ");
+  if (sal.symtab)
+    printf_filtered (" (%s:%d)", sal.symtab->filename, sal.line);
+  puts_filtered ("; ");
+  wrap_here ("    ");
+  printf_filtered ("saved %s ", REGISTER_NAME (PC_REGNUM));
+  print_address_numeric (FRAME_SAVED_PC (fi), 1, gdb_stdout);
+  printf_filtered ("\n");
+
+  {
+    int frameless = 0;
+#ifdef FRAMELESS_FUNCTION_INVOCATION
+    FRAMELESS_FUNCTION_INVOCATION (fi, frameless);
+#endif
+    if (frameless)
+      printf_filtered (" (FRAMELESS),");
+  }
+
+  if (calling_frame_info)
+    {
+      printf_filtered (" called by frame at ");
+      print_address_numeric (calling_frame_info->frame, 1, gdb_stdout);
+    }
+  if (fi->next && calling_frame_info)
+    puts_filtered (",");
+  wrap_here ("   ");
+  if (fi->next)
+    {
+      printf_filtered (" caller of frame at ");
+      print_address_numeric (fi->next->frame, 1, gdb_stdout);
+    }
+  if (fi->next || calling_frame_info)
+    puts_filtered ("\n");
+  if (s)
+    printf_filtered (" source language %s.\n", language_str (s->language));
+
+#ifdef PRINT_EXTRA_FRAME_INFO
+  PRINT_EXTRA_FRAME_INFO (fi);
+#endif
+
+  {
+    /* Address of the argument list for this frame, or 0.  */
+    CORE_ADDR arg_list = FRAME_ARGS_ADDRESS_CORRECT (fi);
+    /* Number of args for this frame, or -1 if unknown.  */
+    int numargs;
+
+    if (arg_list == 0)
+      printf_filtered (" Arglist at unknown address.\n");
+    else
+      {
+	printf_filtered (" Arglist at ");
+	print_address_numeric (arg_list, 1, gdb_stdout);
+	printf_filtered (",");
+
+	FRAME_NUM_ARGS (numargs, fi);
+	if (numargs < 0)
+	  puts_filtered (" args: ");
+	else if (numargs == 0)
+	  puts_filtered (" no args.");
+	else if (numargs == 1)
+	  puts_filtered (" 1 arg: ");
+	else
+	  printf_filtered (" %d args: ", numargs);
+	print_frame_args (func, fi, numargs, gdb_stdout);
+	puts_filtered ("\n");
+      }
+  }
+  {
+    /* Address of the local variables for this frame, or 0.  */
+    CORE_ADDR arg_list = FRAME_LOCALS_ADDRESS (fi);
+
+    if (arg_list == 0)
+      printf_filtered (" Locals at unknown address,");
+    else
+      {
+	printf_filtered (" Locals at ");
+	print_address_numeric (arg_list, 1, gdb_stdout);
+	printf_filtered (",");
+      }
+  }
+
+  FRAME_INIT_SAVED_REGS (fi);
+  if (fi->saved_regs != NULL)
+    {
+      /* The sp is special; what's returned isn't the save address, but
+	 actually the value of the previous frame's sp.  */
+      printf_filtered (" Previous frame's sp is ");
+      print_address_numeric (fi->saved_regs[SP_REGNUM], 1, gdb_stdout);
+      printf_filtered ("\n");
+      count = 0;
+      numregs = ARCH_NUM_REGS;
+      for (i = 0; i < numregs; i++)
+	if (fi->saved_regs[i] && i != SP_REGNUM)
+	  {
+	    if (count == 0)
+	      puts_filtered (" Saved registers:\n ");
+	    else
+	      puts_filtered (",");
+	    wrap_here (" ");
+	    printf_filtered (" %s at ", REGISTER_NAME (i));
+	    print_address_numeric (fi->saved_regs[i], 1, gdb_stdout);
+	    count++;
+	  }
+      if (count)
+	puts_filtered ("\n");
+    }
+  else
+    {
+      /* We could get some information about saved registers by
+	 calling get_saved_register on each register.  Which info goes
+	 with which frame is necessarily lost, however, and I suspect
+	 that the users don't care whether they get the info.  */
+      puts_filtered ("\n");
+    }
+}
+
+#if 0
+/* Set a limit on the number of frames printed by default in a
+   backtrace.  */
+
+static int backtrace_limit;
+
+static void
+set_backtrace_limit_command (count_exp, from_tty)
+     char *count_exp;
+     int from_tty;
+{
+  int count = parse_and_eval_address (count_exp);
+
+  if (count < 0)
+    error ("Negative argument not meaningful as backtrace limit.");
+
+  backtrace_limit = count;
+}
+
+static void
+backtrace_limit_info (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  if (arg)
+    error ("\"Info backtrace-limit\" takes no arguments.");
+
+  printf_unfiltered ("Backtrace limit: %d.\n", backtrace_limit);
+}
+#endif
+
+/* Print briefly all stack frames or just the innermost COUNT frames.  */
+
+static void
+backtrace_command_1 (count_exp, show_locals, from_tty)
+     char *count_exp;
+     int show_locals;
+     int from_tty;
+{
+  struct frame_info *fi;
+  register int count;
+  register int i;
+  register struct frame_info *trailing;
+  register int trailing_level;
+
+  if (!target_has_stack)
+    error ("No stack.");
+
+  /* The following code must do two things.  First, it must
+     set the variable TRAILING to the frame from which we should start
+     printing.  Second, it must set the variable count to the number
+     of frames which we should print, or -1 if all of them.  */
+  trailing = get_current_frame ();
+  trailing_level = 0;
+  if (count_exp)
+    {
+      count = parse_and_eval_address (count_exp);
+      if (count < 0)
+	{
+	  struct frame_info *current;
+
+	  count = -count;
+
+	  current = trailing;
+	  while (current && count--)
+	    {
+	      QUIT;
+	      current = get_prev_frame (current);
+	    }
+	  
+	  /* Will stop when CURRENT reaches the top of the stack.  TRAILING
+	     will be COUNT below it.  */
+	  while (current)
+	    {
+	      QUIT;
+	      trailing = get_prev_frame (trailing);
+	      current = get_prev_frame (current);
+	      trailing_level++;
+	    }
+	  
+	  count = -1;
+	}
+    }
+  else
+    count = -1;
+
+  if (info_verbose)
+    {
+      struct partial_symtab *ps;
+      
+      /* Read in symbols for all of the frames.  Need to do this in
+	 a separate pass so that "Reading in symbols for xxx" messages
+	 don't screw up the appearance of the backtrace.  Also
+	 if people have strong opinions against reading symbols for
+	 backtrace this may have to be an option.  */
+      i = count;
+      for (fi = trailing;
+	   fi != NULL && i--;
+	   fi = get_prev_frame (fi))
+	{
+	  QUIT;
+	  ps = find_pc_psymtab (fi->pc);
+	  if (ps)
+	    PSYMTAB_TO_SYMTAB (ps);	/* Force syms to come in */
+	}
+    }
+
+  for (i = 0, fi = trailing;
+       fi && count--;
+       i++, fi = get_prev_frame (fi))
+    {
+      QUIT;
+
+      /* Don't use print_stack_frame; if an error() occurs it probably
+	 means further attempts to backtrace would fail (on the other
+	 hand, perhaps the code does or could be fixed to make sure
+	 the frame->prev field gets set to NULL in that case).  */
+      print_frame_info_base (fi, trailing_level + i, 0, 1);
+      if (show_locals)
+	print_frame_local_vars(fi, 1, gdb_stdout);
+    }
+
+  /* If we've stopped before the end, mention that.  */
+  if (fi && from_tty)
+    printf_filtered ("(More stack frames follow...)\n");
+}
+
+static void
+backtrace_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct cleanup    *old_chain = (struct cleanup *)NULL;
+  char              **argv = (char **)NULL;
+  int               argIndicatingFullTrace = (-1), totArgLen = 0, argc = 0;
+  char              *argPtr = arg;
+
+  if (arg != (char *)NULL)
+    {
+      int i;
+
+      argv = buildargv(arg);
+      old_chain = make_cleanup ((make_cleanup_func) freeargv, (char *)argv);
+      argc = 0;
+      for (i = 0; (argv[i] != (char *)NULL); i++)
+        {
+          int j;
+
+          for (j = 0; (j < strlen(argv[i])); j++)
+            argv[i][j] = tolower(argv[i][j]);
+
+          if (argIndicatingFullTrace < 0 && subsetCompare(argv[i], "full"))
+            argIndicatingFullTrace = argc;
+          else
+            {
+              argc++;
+              totArgLen += strlen(argv[i]);
+            }
+        }
+      totArgLen += argc;
+      if (argIndicatingFullTrace >= 0)
+        {
+          if (totArgLen > 0)
+            {
+              argPtr = (char *)xmalloc(totArgLen + 1);
+              if (!argPtr)
+                nomem(0);
+              else
+                {
+                  memset(argPtr, 0, totArgLen + 1);
+                  for (i = 0; (i < (argc + 1)); i++)
+                    {
+                      if (i != argIndicatingFullTrace)
+                        {
+                          strcat(argPtr, argv[i]);
+                          strcat(argPtr, " ");
+                        }
+                    }
+                }
+            }
+          else
+            argPtr = (char *)NULL;
+        }
+    }
+
+  backtrace_command_1 (argPtr, (argIndicatingFullTrace >= 0), from_tty);
+
+  if (argIndicatingFullTrace >= 0 && totArgLen > 0)
+    free(argPtr);
+
+  if (old_chain)
+    do_cleanups(old_chain);
+}
+
+static void
+backtrace_full_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  backtrace_command_1 (arg, 1, from_tty);
+}
+
+
+/* Print the local variables of a block B active in FRAME.
+   Return 1 if any variables were printed; 0 otherwise.  */
+
+static int
+print_block_frame_locals (b, fi, num_tabs, stream)
+     struct block *b;
+     register struct frame_info *fi;
+     int num_tabs;
+     register GDB_FILE *stream;
+{
+  int nsyms;
+  register int i, j;
+  register struct symbol *sym;
+  register int values_printed = 0;
+
+  nsyms = BLOCK_NSYMS (b);
+
+  for (i = 0; i < nsyms; i++)
+    {
+      sym = BLOCK_SYM (b, i);
+      switch (SYMBOL_CLASS (sym))
+	{
+	case LOC_LOCAL:
+	case LOC_REGISTER:
+	case LOC_STATIC:
+	case LOC_BASEREG:
+	  values_printed = 1;
+	  for (j = 0; j < num_tabs; j++)
+	    fputs_filtered("\t", stream);
+	  fputs_filtered (SYMBOL_SOURCE_NAME (sym), stream);
+	  fputs_filtered (" = ", stream);
+	  print_variable_value (sym, fi, stream);
+	  fprintf_filtered (stream, "\n");
+	  break;
+
+	default:
+	  /* Ignore symbols which are not locals.  */
+	  break;
+	}
+    }
+  return values_printed;
+}
+
+/* Same, but print labels.  */
+
+static int
+print_block_frame_labels (b, have_default, stream)
+     struct block *b;
+     int *have_default;
+     register GDB_FILE *stream;
+{
+  int nsyms;
+  register int i;
+  register struct symbol *sym;
+  register int values_printed = 0;
+
+  nsyms = BLOCK_NSYMS (b);
+
+  for (i = 0; i < nsyms; i++)
+    {
+      sym = BLOCK_SYM (b, i);
+      if (STREQ (SYMBOL_NAME (sym), "default"))
+	{
+	  if (*have_default)
+	    continue;
+	  *have_default = 1;
+	}
+      if (SYMBOL_CLASS (sym) == LOC_LABEL)
+	{
+	  struct symtab_and_line sal;
+	  sal = find_pc_line (SYMBOL_VALUE_ADDRESS (sym), 0);
+	  values_printed = 1;
+	  fputs_filtered (SYMBOL_SOURCE_NAME (sym), stream);
+	  if (addressprint)
+	    {
+	      fprintf_filtered (stream, " ");
+	      print_address_numeric (SYMBOL_VALUE_ADDRESS (sym), 1, stream);
+	    }
+	  fprintf_filtered (stream, " in file %s, line %d\n",
+			    sal.symtab->filename, sal.line);
+	}
+    }
+  return values_printed;
+}
+
+/* Print on STREAM all the local variables in frame FRAME,
+   including all the blocks active in that frame
+   at its current pc.
+
+   Returns 1 if the job was done,
+   or 0 if nothing was printed because we have no info
+   on the function running in FRAME.  */
+
+static void
+print_frame_local_vars (fi, num_tabs, stream)
+     register struct frame_info *fi;
+     register int num_tabs;
+     register GDB_FILE *stream;
+{
+  register struct block *block = get_frame_block (fi);
+  register int values_printed = 0;
+
+  if (block == 0)
+    {
+      fprintf_filtered (stream, "No symbol table info available.\n");
+      return;
+    }
+  
+  while (block != 0)
+    {
+      if (print_block_frame_locals (block, fi, num_tabs, stream))
+	values_printed = 1;
+      /* After handling the function's top-level block, stop.
+	 Don't continue to its superblock, the block of
+	 per-file symbols.  */
+      if (BLOCK_FUNCTION (block))
+	break;
+      block = BLOCK_SUPERBLOCK (block);
+    }
+
+  if (!values_printed)
+    {
+      fprintf_filtered (stream, "No locals.\n");
+    }
+}
+
+/* Same, but print labels.  */
+
+static void
+print_frame_label_vars (fi, this_level_only, stream)
+     register struct frame_info *fi;
+     int this_level_only;
+     register GDB_FILE *stream;
+{
+  register struct blockvector *bl;
+  register struct block *block = get_frame_block (fi);
+  register int values_printed = 0;
+  int index, have_default = 0;
+  char *blocks_printed;
+  CORE_ADDR pc = fi->pc;
+
+  if (block == 0)
+    {
+      fprintf_filtered (stream, "No symbol table info available.\n");
+      return;
+    }
+
+  bl = blockvector_for_pc (BLOCK_END (block) - 4, &index);
+  blocks_printed = (char *) alloca (BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+  memset (blocks_printed, 0, BLOCKVECTOR_NBLOCKS (bl) * sizeof (char));
+
+  while (block != 0)
+    {
+      CORE_ADDR end = BLOCK_END (block) - 4;
+      int last_index;
+
+      if (bl != blockvector_for_pc (end, &index))
+	error ("blockvector blotch");
+      if (BLOCKVECTOR_BLOCK (bl, index) != block)
+	error ("blockvector botch");
+      last_index = BLOCKVECTOR_NBLOCKS (bl);
+      index += 1;
+
+      /* Don't print out blocks that have gone by.  */
+      while (index < last_index
+	     && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < pc)
+	index++;
+
+      while (index < last_index
+	     && BLOCK_END (BLOCKVECTOR_BLOCK (bl, index)) < end)
+	{
+	  if (blocks_printed[index] == 0)
+	    {
+	      if (print_block_frame_labels (BLOCKVECTOR_BLOCK (bl, index), &have_default, stream))
+		values_printed = 1;
+	      blocks_printed[index] = 1;
+	    }
+	  index++;
+	}
+      if (have_default)
+	return;
+      if (values_printed && this_level_only)
+	return;
+
+      /* After handling the function's top-level block, stop.
+	 Don't continue to its superblock, the block of
+	 per-file symbols.  */
+      if (BLOCK_FUNCTION (block))
+	break;
+      block = BLOCK_SUPERBLOCK (block);
+    }
+
+  if (!values_printed && !this_level_only)
+    {
+      fprintf_filtered (stream, "No catches.\n");
+    }
+}
+
+/* ARGSUSED */
+void
+locals_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (!selected_frame)
+    error ("No frame selected.");
+  print_frame_local_vars (selected_frame, 0, gdb_stdout);
+}
+
+static void
+catch_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  struct symtab_and_line * sal;
+
+  /* Check for target support for exception handling */ 
+  sal = target_enable_exception_callback (EX_EVENT_CATCH, 1);
+  if (sal)
+    {
+      /* Currently not handling this */
+      /* Ideally, here we should interact with the C++ runtime
+         system to find the list of active handlers, etc. */
+      fprintf_filtered (gdb_stdout, "Info catch not supported with this target/compiler combination.\n");
+#if 0
+  if (!selected_frame)
+    error ("No frame selected.");
+#endif
+    }
+  else
+    {
+      /* Assume g++ compiled code -- old v 4.16 behaviour */ 
+      if (!selected_frame)
+        error ("No frame selected.");
+      
+      print_frame_label_vars (selected_frame, 0, gdb_stdout);
+    }
+}
+
+static void
+print_frame_arg_vars (fi, stream)
+     register struct frame_info *fi;
+     register GDB_FILE *stream;
+{
+  struct symbol *func = get_frame_function (fi);
+  register struct block *b;
+  int nsyms;
+  register int i;
+  register struct symbol *sym, *sym2;
+  register int values_printed = 0;
+
+  if (func == 0)
+    {
+      fprintf_filtered (stream, "No symbol table info available.\n");
+      return;
+    }
+
+  b = SYMBOL_BLOCK_VALUE (func);
+  nsyms = BLOCK_NSYMS (b);
+
+  for (i = 0; i < nsyms; i++)
+    {
+      sym = BLOCK_SYM (b, i);
+      switch (SYMBOL_CLASS (sym))
+	{
+	case LOC_ARG:
+	case LOC_LOCAL_ARG:
+	case LOC_REF_ARG:
+	case LOC_REGPARM:
+	case LOC_REGPARM_ADDR:
+	case LOC_BASEREG_ARG:
+	  values_printed = 1;
+	  fputs_filtered (SYMBOL_SOURCE_NAME (sym), stream);
+	  fputs_filtered (" = ", stream);
+
+	  /* We have to look up the symbol because arguments can have
+	     two entries (one a parameter, one a local) and the one we
+	     want is the local, which lookup_symbol will find for us.
+	     This includes gcc1 (not gcc2) on the sparc when passing a
+	     small structure and gcc2 when the argument type is float
+	     and it is passed as a double and converted to float by
+	     the prologue (in the latter case the type of the LOC_ARG
+	     symbol is double and the type of the LOC_LOCAL symbol is
+	     float).  There are also LOC_ARG/LOC_REGISTER pairs which
+	     are not combined in symbol-reading.  */
+
+	  sym2 = lookup_symbol (SYMBOL_NAME (sym),
+			b, VAR_NAMESPACE, (int *)NULL, (struct symtab **)NULL);
+	  print_variable_value (sym2, fi, stream);
+	  fprintf_filtered (stream, "\n");
+	  break;
+
+	default:
+	  /* Don't worry about things which aren't arguments.  */
+	  break;
+	}
+    }
+
+  if (!values_printed)
+    {
+      fprintf_filtered (stream, "No arguments.\n");
+    }
+}
+
+void
+args_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  if (!selected_frame)
+    error ("No frame selected.");
+  print_frame_arg_vars (selected_frame, gdb_stdout);
+}
+
+
+static void
+args_plus_locals_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  args_info(ignore, from_tty);
+  locals_info(ignore, from_tty);
+}
+
+
+/* Select frame FI, and note that its stack level is LEVEL.
+   LEVEL may be -1 if an actual level number is not known.  */
+
+void
+select_frame (fi, level)
+     struct frame_info *fi;
+     int level;
+{
+  register struct symtab *s;
+
+  selected_frame = fi;
+  selected_frame_level = level;
+  if (selected_frame_level_changed_hook)
+    selected_frame_level_changed_hook (level);
+
+  /* Ensure that symbols for this frame are read in.  Also, determine the
+     source language of this frame, and switch to it if desired.  */
+  if (fi)
+  {
+    s = find_pc_symtab (fi->pc);
+    if (s 
+	&& s->language != current_language->la_language
+	&& s->language != language_unknown
+	&& language_mode == language_mode_auto) {
+      set_language(s->language);
+    }
+    /* elz: this if here fixes the problem with the pc not being displayed
+       in the tui asm layout, with no debug symbols. The value of s 
+       would be 0 here, and select_source_symtab would abort the
+       command by calling the 'error' function*/
+    if (s)
+      {
+	TUIDO(((TuiOpaqueFuncPtr)tui_vSelectSourceSymtab, s));
+      }
+  }
+}
+
+
+/* Select frame FI, noting that its stack level is LEVEL.  Also print
+   the stack frame and show the source if this is the tui version.  */
+void
+select_and_print_frame(fi, level)
+     struct frame_info *fi;
+     int level;
+{
+  select_frame(fi, level);
+  if (fi)
+    {
+      print_stack_frame(fi, level, 1);
+      TUIDO(((TuiOpaqueFuncPtr)tui_vCheckDataValues, fi));
+    }
+}
+
+
+/* Select frame FI, noting that its stack level is LEVEL.  Be silent if
+   not the TUI */
+void
+select_and_maybe_print_frame (fi, level)
+     struct frame_info *fi;
+     int level;
+{
+  if (!tui_version)
+    select_frame(fi, level);
+  else
+    select_and_print_frame(fi, level);
+}
+
+
+/* Store the selected frame and its level into *FRAMEP and *LEVELP.
+   If there is no selected frame, *FRAMEP is set to NULL.  */
+
+void
+record_selected_frame (frameaddrp, levelp)
+     CORE_ADDR *frameaddrp;
+     int *levelp;
+{
+  *frameaddrp = selected_frame ? selected_frame->frame : 0;
+  *levelp = selected_frame_level;
+}
+
+/* Return the symbol-block in which the selected frame is executing.
+   Can return zero under various legitimate circumstances.  */
+
+struct block *
+get_selected_block ()
+{
+  if (!target_has_stack)
+    return 0;
+
+  if (!selected_frame)
+    return get_current_block ();
+  return get_frame_block (selected_frame);
+}
+
+/* Find a frame a certain number of levels away from FRAME.
+   LEVEL_OFFSET_PTR points to an int containing the number of levels.
+   Positive means go to earlier frames (up); negative, the reverse.
+   The int that contains the number of levels is counted toward
+   zero as the frames for those levels are found.
+   If the top or bottom frame is reached, that frame is returned,
+   but the final value of *LEVEL_OFFSET_PTR is nonzero and indicates
+   how much farther the original request asked to go.  */
+
+struct frame_info *
+find_relative_frame (frame, level_offset_ptr)
+     register struct frame_info *frame;
+     register int *level_offset_ptr;
+{
+  register struct frame_info *prev;
+  register struct frame_info *frame1;
+
+  /* Going up is simple: just do get_prev_frame enough times
+     or until initial frame is reached.  */
+  while (*level_offset_ptr > 0)
+    {
+      prev = get_prev_frame (frame);
+      if (prev == 0)
+	break;
+      (*level_offset_ptr)--;
+      frame = prev;
+    }
+  /* Going down is just as simple.  */
+  if (*level_offset_ptr < 0)
+    {
+      while (*level_offset_ptr < 0) {
+	frame1 = get_next_frame (frame);
+	if (!frame1)
+	  break;
+	frame = frame1;
+	(*level_offset_ptr)++;
+      }
+    }
+  return frame;
+}
+
+/* The "select_frame" command.  With no arg, NOP.
+   With arg LEVEL_EXP, select the frame at level LEVEL if it is a
+   valid level.  Otherwise, treat level_exp as an address expression
+   and select it.  See parse_frame_specification for more info on proper
+   frame expressions. */
+
+/* ARGSUSED */
+static void
+select_frame_command (level_exp, from_tty)
+     char *level_exp;
+     int from_tty;
+{
+  register struct frame_info *frame, *frame1;
+  unsigned int level = 0;
+
+  if (!target_has_stack)
+    error ("No stack.");
+
+  frame = parse_frame_specification (level_exp);
+
+  /* Try to figure out what level this frame is.  But if there is
+     no current stack, don't error out -- let the user set one.  */
+  frame1 = 0;
+  if (get_current_frame()) {
+    for (frame1 = get_prev_frame (0);
+	 frame1 && frame1 != frame;
+	 frame1 = get_prev_frame (frame1))
+      level++;
+  }
+
+  if (!frame1)
+    level = 0;
+
+  select_frame (frame, level);
+}
+
+/* The "frame" command.  With no arg, print selected frame briefly.
+   With arg, behaves like select_frame and then prints the selected
+   frame.  */
+
+void
+frame_command (level_exp, from_tty)
+     char *level_exp;
+     int from_tty;
+{
+  select_frame_command (level_exp, from_tty);
+  show_and_print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+/* The XDB Compatibility command to print the current frame. */
+
+void
+current_frame_command (level_exp, from_tty)
+     char *level_exp;
+     int from_tty;
+{
+  if (target_has_stack == 0 || selected_frame == 0)
+    error ("No stack."); 
+ print_only_stack_frame (selected_frame, selected_frame_level, 1);
+  }
+
+/* Select the frame up one or COUNT stack levels
+   from the previously selected frame, and print it briefly.  */
+
+/* ARGSUSED */
+static void
+up_silently_base (count_exp)
+     char *count_exp;
+{
+  register struct frame_info *fi;
+  int count = 1, count1;
+  if (count_exp)
+    count = parse_and_eval_address (count_exp);
+  count1 = count;
+  
+  if (target_has_stack == 0 || selected_frame == 0)
+    error ("No stack.");
+
+  fi = find_relative_frame (selected_frame, &count1);
+  if (count1 != 0 && count_exp == 0)
+    error ("Initial frame selected; you cannot go up.");
+  select_frame (fi, selected_frame_level + count - count1);
+}
+
+static void
+up_silently_command (count_exp, from_tty)
+     char *count_exp;
+     int from_tty;
+{
+  up_silently_base(count_exp);
+  if (tui_version)
+    print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+static void
+up_command (count_exp, from_tty)
+     char *count_exp;
+     int from_tty;
+{
+  up_silently_base (count_exp);
+  show_and_print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+/* Select the frame down one or COUNT stack levels
+   from the previously selected frame, and print it briefly.  */
+
+/* ARGSUSED */
+static void
+down_silently_base (count_exp)
+     char *count_exp;
+{
+  register struct frame_info *frame;
+  int count = -1, count1;
+  if (count_exp)
+    count = - parse_and_eval_address (count_exp);
+  count1 = count;
+  
+  if (target_has_stack == 0 || selected_frame == 0)
+    error ("No stack.");
+
+  frame = find_relative_frame (selected_frame, &count1);
+  if (count1 != 0 && count_exp == 0)
+    {
+
+      /* We only do this if count_exp is not specified.  That way "down"
+	 means to really go down (and let me know if that is
+	 impossible), but "down 9999" can be used to mean go all the way
+	 down without getting an error.  */
+
+      error ("Bottom (i.e., innermost) frame selected; you cannot go down.");
+    }
+
+  select_frame (frame, selected_frame_level + count - count1);
+}
+
+/* ARGSUSED */
+static void
+down_silently_command (count_exp, from_tty)
+     char *count_exp;
+     int from_tty;
+{
+  down_silently_base (count_exp);
+  if (tui_version)
+    print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+static void
+down_command (count_exp, from_tty)
+     char *count_exp;
+     int from_tty;
+{
+  down_silently_base (count_exp);
+  show_and_print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+static void
+return_command (retval_exp, from_tty)
+     char *retval_exp;
+     int from_tty;
+{
+  struct symbol *thisfun;
+  CORE_ADDR selected_frame_addr;
+  CORE_ADDR selected_frame_pc;
+  struct frame_info *frame;
+  value_ptr return_value = NULL;
+
+  if (selected_frame == NULL)
+    error ("No selected frame.");
+  thisfun = get_frame_function (selected_frame);
+  selected_frame_addr = FRAME_FP (selected_frame);
+  selected_frame_pc = selected_frame->pc;
+
+  /* Compute the return value (if any -- possibly getting errors here).  */
+
+  if (retval_exp)
+    {
+      struct type *return_type = NULL;
+
+      return_value = parse_and_eval (retval_exp);
+
+      /* Cast return value to the return type of the function.  */
+      if (thisfun != NULL)
+	return_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (thisfun));
+      if (return_type == NULL)
+	return_type = builtin_type_int;
+      return_value = value_cast (return_type, return_value);
+
+      /* Make sure we have fully evaluated it, since
+	 it might live in the stack frame we're about to pop.  */
+      if (VALUE_LAZY (return_value))
+	value_fetch_lazy (return_value);
+    }
+
+  /* If interactive, require confirmation.  */
+
+  if (from_tty)
+    {
+      if (thisfun != 0)
+	{
+	  if (!query ("Make %s return now? ", SYMBOL_SOURCE_NAME (thisfun)))
+	    {
+	      error ("Not confirmed.");
+	      /* NOTREACHED */
+	    }
+	}
+      else
+	if (!query ("Make selected stack frame return now? "))
+	  error ("Not confirmed.");
+    }
+
+  /* Do the real work.  Pop until the specified frame is current.  We
+     use this method because the selected_frame is not valid after
+     a POP_FRAME.  The pc comparison makes this work even if the
+     selected frame shares its fp with another frame.  */
+
+  while (selected_frame_addr != (frame = get_current_frame())->frame
+	 || selected_frame_pc != frame->pc)
+    POP_FRAME;
+
+  /* Then pop that frame.  */
+
+  POP_FRAME;
+
+  /* Compute the return value (if any) and store in the place
+     for return values.  */
+
+  if (retval_exp)
+    set_return_value (return_value);
+
+  /* If interactive, print the frame that is now current.  */
+
+  if (from_tty)
+    frame_command ("0", 1);
+  else
+    select_frame_command ("0", 0);
+}
+
+/* Sets the scope to input function name, provided that the
+   function is within the current stack frame */
+
+struct function_bounds
+{
+  CORE_ADDR low, high;
+};
+
+static void
+func_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct frame_info *fp;
+  int found = 0;
+  struct symtabs_and_lines sals;
+  int i;
+  int level = 1;
+  struct function_bounds *func_bounds = (struct function_bounds *) NULL;
+
+  if (arg != (char *) NULL)
+    return;
+
+  fp = parse_frame_specification ("0");
+  sals = decode_line_spec (arg, 1);
+  func_bounds = (struct function_bounds *) xmalloc (
+			      sizeof (struct function_bounds) * sals.nelts);
+  for (i = 0; (i < sals.nelts && !found); i++)
+    {
+      if (sals.sals[i].pc == (CORE_ADDR) 0 ||
+	  find_pc_partial_function (sals.sals[i].pc,
+				    (char **) NULL,
+				    &func_bounds[i].low,
+				    &func_bounds[i].high) == 0)
+	{
+	  func_bounds[i].low =
+	    func_bounds[i].high = (CORE_ADDR) NULL;
+	}
+    }
+
+  do
+    {
+      for (i = 0; (i < sals.nelts && !found); i++)
+	found = (fp->pc >= func_bounds[i].low &&
+		 fp->pc < func_bounds[i].high);
+      if (!found)
+	{
+	  level = 1;
+	  fp = find_relative_frame (fp, &level);
+	}
+    }
+  while (!found && level == 0);
+
+  if (func_bounds)
+    free (func_bounds);
+
+  if (!found)
+    printf_filtered ("'%s' not within current stack frame.\n", arg);
+  else if (fp != selected_frame)
+    select_and_print_frame (fp, level);
+}
+
+/* Gets the language of the current frame.  */
+
+enum language
+get_frame_language ()
+{
+  register struct symtab *s;
+  enum language flang;		/* The language of the current frame */
+   
+  if (selected_frame)
+    {
+      s = find_pc_symtab(selected_frame->pc);
+      if (s)
+	flang = s->language;
+      else
+	flang = language_unknown;
+    }
+  else
+    flang = language_unknown;
+
+  return flang;
+}
+
+void
+_initialize_stack ()
+{
+#if 0  
+  backtrace_limit = 30;
+#endif
+
+  add_com ("return", class_stack, return_command,
+	   "Make selected stack frame return to its caller.\n\
+Control remains in the debugger, but when you continue\n\
+execution will resume in the frame above the one now selected.\n\
+If an argument is given, it is an expression for the value to return.");
+
+  add_com ("up", class_stack, up_command,
+	   "Select and print stack frame that called this one.\n\
+An argument says how many frames up to go.");
+  add_com ("up-silently", class_support, up_silently_command,
+	   "Same as the `up' command, but does not print anything.\n\
+This is useful in command scripts.");
+
+  add_com ("down", class_stack, down_command,
+	   "Select and print stack frame called by this one.\n\
+An argument says how many frames down to go.");
+  add_com_alias ("do", "down", class_stack, 1);
+  add_com_alias ("dow", "down", class_stack, 1);
+  add_com ("down-silently", class_support, down_silently_command,
+	   "Same as the `down' command, but does not print anything.\n\
+This is useful in command scripts.");
+
+  add_com ("frame", class_stack, frame_command,
+	   "Select and print a stack frame.\n\
+With no argument, print the selected stack frame.  (See also \"info frame\").\n\
+An argument specifies the frame to select.\n\
+It can be a stack frame number or the address of the frame.\n\
+With argument, nothing is printed if input is coming from\n\
+a command file or a user-defined command.");
+
+  add_com_alias ("f", "frame", class_stack, 1);
+
+  if (xdb_commands)
+    {
+      add_com("L", class_stack, current_frame_command, 
+              "Print the current stack frame.\n");
+      add_com_alias ("V", "frame", class_stack, 1);
+    }
+  add_com ("select-frame", class_stack, select_frame_command,
+	   "Select a stack frame without printing anything.\n\
+An argument specifies the frame to select.\n\
+It can be a stack frame number or the address of the frame.\n");
+
+  add_com ("backtrace", class_stack, backtrace_command,
+	   "Print backtrace of all stack frames, or innermost COUNT frames.\n\
+With a negative argument, print outermost -COUNT frames.\n\
+Use of the 'full' qualifier also prints the values of the local variables.\n");
+  add_com_alias ("bt", "backtrace", class_stack, 0);
+  if (xdb_commands)
+    {
+      add_com_alias ("t", "backtrace", class_stack, 0);
+      add_com ("T", class_stack, backtrace_full_command,
+	   "Print backtrace of all stack frames, or innermost COUNT frames \n\
+and the values of the local variables.\n\
+With a negative argument, print outermost -COUNT frames.\n\
+Usage: T <count>\n");
+    }
+
+  add_com_alias ("where", "backtrace", class_alias, 0);
+  add_info ("stack", backtrace_command,
+	    "Backtrace of the stack, or innermost COUNT frames.");
+  add_info_alias ("s", "stack", 1);
+  add_info ("frame", frame_info,
+	    "All about selected stack frame, or frame at ADDR.");
+  add_info_alias ("f", "frame", 1);
+  add_info ("locals", locals_info,
+	    "Local variables of current stack frame.");
+  add_info ("args", args_info,
+	    "Argument variables of current stack frame.");
+  if (xdb_commands)
+      add_com("l", class_info, args_plus_locals_info, 
+	    "Argument and local variables of current stack frame.");
+
+  if (dbx_commands)
+      add_com("func", class_stack, func_command, 
+         "Select the stack frame that contains <func>.\nUsage: func <name>\n");
+
+  add_info ("catch", catch_info,
+	    "Exceptions that can be caught in the current stack frame.");
+
+#if 0
+  add_cmd ("backtrace-limit", class_stack, set_backtrace_limit_command, 
+	   "Specify maximum number of frames for \"backtrace\" to print by default.",
+	   &setlist);
+  add_info ("backtrace-limit", backtrace_limit_info,
+	    "The maximum number of frames for \"backtrace\" to print by default.");
+#endif
+}
diff --git a/gdb/standalone.c b/gdb/standalone.c
new file mode 100644
index 0000000..13fc476
--- /dev/null
+++ b/gdb/standalone.c
@@ -0,0 +1,593 @@
+/* Interface to bare machine for GDB running as kernel debugger.
+   Copyright (C) 1986, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include <stdio.h>
+#include <sys/ioctl.h>
+#include <errno.h>
+#include <sys/types.h>
+#include "gdb_stat.h"
+
+#if defined (SIGTSTP) && defined (SIGIO)
+#include <sys/time.h>
+#include <sys/resource.h>
+#endif /* SIGTSTP and SIGIO defined (must be 4.2) */
+
+#include "defs.h"
+#include "signals.h"
+#include "symtab.h"
+#include "frame.h"
+#include "inferior.h"
+#include "wait.h"
+
+
+/* Random system calls, mostly no-ops to prevent link problems  */
+
+ioctl (desc, code, arg)
+{}
+
+int (* signal ()) ()
+{}
+
+kill ()
+{}
+
+getpid ()
+{
+  return 0;
+}
+
+sigsetmask ()
+{}
+
+chdir ()
+{}
+
+char *
+getcwd (buf, len)
+     char *buf;
+     unsigned int len;
+{
+  buf[0] = '/';
+  buf[1] = 0;
+  return buf;
+}
+
+/* Used to check for existence of .gdbinit.  Say no.  */
+
+access ()
+{
+  return -1;
+}
+
+exit ()
+{
+  error ("Fatal error; restarting.");
+}
+
+/* Reading "files".  The contents of some files are written into kdb's
+   data area before it is run.  These files are used to contain the
+   symbol table for kdb to load, and the source files (in case the
+   kdb user wants to print them).  The symbols are stored in a file
+   named "kdb-symbols" in a.out format (except that all the text and
+   data have been stripped to save room).
+
+   The files are stored in the following format:
+   int     number of bytes of data for this file, including these four.
+   char[]  name of the file, ending with a null.
+   padding to multiple of 4 boundary.
+   char[]  file contents.  The length can be deduced from what was
+           specified before.  There is no terminating null here.
+
+   If the int at the front is zero, it means there are no more files.
+
+   Opening a file in kdb returns a nonzero value to indicate success,
+   but the value does not matter.  Only one file can be open, and only
+   for reading.  All the primitives for input from the file know
+   which file is open and ignore what is specified for the descriptor
+   or for the stdio stream.
+
+   Input with fgetc can be done either on the file that is open
+   or on stdin (which reads from the terminal through tty_input ()  */
+
+/* Address of data for the files stored in format described above.  */
+char *files_start;
+
+/* The file stream currently open:  */
+
+char *sourcebeg;		/* beginning of contents */
+int sourcesize;			/* size of contents */
+char *sourceptr;		/* current read pointer */
+int sourceleft;			/* number of bytes to eof */
+
+/* "descriptor" for the file now open.
+   Incremented at each close.
+   If specified descriptor does not match this,
+   it means the program is trying to use a closed descriptor.
+   We report an error for that.  */
+
+int sourcedesc;
+
+open (filename, modes)
+     char *filename;
+     int modes;
+{
+  register char *next;
+
+  if (modes)
+    {
+      errno = EROFS;
+      return -1;
+    }
+
+  if (sourceptr)
+    {
+      errno = EMFILE;
+      return -1;
+    }
+
+  for (next = files_start; * (int *) next; next += * (int *) next)
+    {
+      if (!STRCMP (next + 4, filename))
+	{
+	  sourcebeg = next + 4 + strlen (next + 4) + 1;
+	  sourcebeg = (char *) (((int) sourcebeg + 3) & (-4));
+	  sourceptr = sourcebeg;
+	  sourcesize = next + * (int *) next - sourceptr;
+	  sourceleft = sourcesize;
+	  return sourcedesc;
+	}
+    }
+  return 0;
+}
+
+close (desc)
+     int desc;
+{
+  sourceptr = 0;
+  sourcedesc++;
+  /* Don't let sourcedesc get big enough to be confused with stdin.  */
+  if (sourcedesc == 100)
+    sourcedesc = 5;
+}
+
+FILE *
+fopen (filename, modes)
+     char *filename;
+     char *modes;
+{
+  return (FILE *) open (filename, *modes == 'w');
+}
+
+FILE *
+fdopen (desc)
+     int desc;
+{
+  return (FILE *) desc;
+}
+
+fclose (desc)
+     int desc;
+{
+  close (desc);
+}
+
+fstat (desc, statbuf)
+     struct stat *statbuf;
+{
+  if (desc != sourcedesc)
+    {
+      errno = EBADF;
+      return -1;
+    }
+  statbuf->st_size = sourcesize;
+}
+
+myread (desc, destptr, size, filename)
+     int desc;
+     char *destptr;
+     int size;
+     char *filename;
+{
+  int len = min (sourceleft, size);
+
+  if (desc != sourcedesc)
+    {
+      errno = EBADF;
+      return -1;
+    }
+
+  memcpy (destptr, sourceptr, len);
+  sourceleft -= len;
+  return len;
+}
+
+int
+fread (bufp, numelts, eltsize, stream)
+{
+  register int elts = min (numelts, sourceleft / eltsize);
+  register int len = elts * eltsize;
+
+  if (stream != sourcedesc)
+    {
+      errno = EBADF;
+      return -1;
+    }
+
+  memcpy (bufp, sourceptr, len);
+  sourceleft -= len;
+  return elts;
+}
+
+int
+fgetc (desc)
+     int desc;
+{
+
+  if (desc == (int) stdin)
+    return tty_input ();
+
+  if (desc != sourcedesc)
+    {
+      errno = EBADF;
+      return -1;
+    }
+
+  if (sourceleft-- <= 0)
+    return EOF;
+  return *sourceptr++;
+}
+
+lseek (desc, pos)
+     int desc;
+     int pos;
+{
+
+  if (desc != sourcedesc)
+    {
+      errno = EBADF;
+      return -1;
+    }
+
+  if (pos < 0 || pos > sourcesize)
+    {
+      errno = EINVAL;
+      return -1;
+    }
+
+  sourceptr = sourcebeg + pos;
+  sourceleft = sourcesize - pos;
+}
+
+/* Output in kdb can go only to the terminal, so the stream
+   specified may be ignored.  */
+
+printf (a1, a2, a3, a4, a5, a6, a7, a8, a9)
+{
+  char buffer[1024];
+  sprintf (buffer, a1, a2, a3, a4, a5, a6, a7, a8, a9);
+  display_string (buffer);
+}
+
+fprintf (ign, a1, a2, a3, a4, a5, a6, a7, a8, a9)
+{
+  char buffer[1024];
+  sprintf (buffer, a1, a2, a3, a4, a5, a6, a7, a8, a9);
+  display_string (buffer);
+}
+
+fwrite (buf, numelts, size, stream)
+     register char *buf;
+     int numelts, size;
+{
+  register int i = numelts * size;
+  while (i-- > 0)
+    fputc (*buf++, stream);
+}
+
+fputc (c, ign)
+{
+  char buf[2];
+  buf[0] = c;
+  buf[1] = 0;
+  display_string (buf);
+}
+
+/* sprintf refers to this, but loading this from the
+   library would cause fflush to be loaded from it too.
+   In fact there should be no need to call this (I hope).  */
+
+_flsbuf ()
+{
+  error ("_flsbuf was actually called.");
+}
+
+fflush (ign)
+{
+}
+
+/* Entries into core and inflow, needed only to make things link ok.  */
+
+exec_file_command ()
+{}
+
+core_file_command ()
+{}
+
+char *
+get_exec_file (err)
+     int err;
+{
+  /* Makes one printout look reasonable; value does not matter otherwise.  */
+  return "run";
+}
+
+/* Nonzero if there is a core file.  */
+
+have_core_file_p ()
+{
+  return 0;
+}
+
+kill_command ()
+{
+  inferior_pid = 0;
+}
+
+terminal_inferior ()
+{}
+
+terminal_ours ()
+{}
+
+terminal_init_inferior ()
+{}
+
+write_inferior_register ()
+{}
+
+read_inferior_register ()
+{}
+
+read_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  memcpy (myaddr, memaddr, len);
+}
+
+/* Always return 0 indicating success.  */
+
+write_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  memcpy (memaddr, myaddr, len);
+  return 0;
+}
+
+static REGISTER_TYPE saved_regs[NUM_REGS];
+
+REGISTER_TYPE
+read_register (regno)
+     int regno;
+{
+  if (regno < 0 || regno >= NUM_REGS)
+    error ("Register number %d out of range.", regno);
+  return saved_regs[regno];
+}
+
+void
+write_register (regno, value)
+     int regno;
+     REGISTER_TYPE value;
+{
+  if (regno < 0 || regno >= NUM_REGS)
+    error ("Register number %d out of range.", regno);
+  saved_regs[regno] = value;
+}
+
+/* System calls needed in relation to running the "inferior".  */
+
+vfork ()
+{
+  /* Just appear to "succeed".  Say the inferior's pid is 1.  */
+  return 1;
+}
+
+/* These are called by code that normally runs in the inferior
+   that has just been forked.  That code never runs, when standalone,
+   and these definitions are so it will link without errors.  */
+
+ptrace ()
+{}
+
+setpgrp ()
+{}
+
+execle ()
+{}
+
+_exit ()
+{}
+
+/* Malloc calls these.  */
+
+malloc_warning (str)
+     char *str;
+{
+  printf ("\n%s.\n\n", str);
+}
+
+char *next_free;
+char *memory_limit;
+
+char *
+sbrk (amount)
+     int amount;
+{
+  if (next_free + amount > memory_limit)
+    return (char *) -1;
+  next_free += amount;
+  return next_free - amount;
+}
+
+/* Various ways malloc might ask where end of memory is.  */
+
+char *
+ulimit ()
+{
+  return memory_limit;
+}
+
+int
+vlimit ()
+{
+  return memory_limit - next_free;
+}
+
+getrlimit (addr)
+     struct rlimit *addr;
+{
+  addr->rlim_cur = memory_limit - next_free;
+}
+
+/* Context switching to and from program being debugged.  */
+
+/* GDB calls here to run the user program.
+   The frame pointer for this function is saved in
+   gdb_stack by save_frame_pointer; then we restore
+   all of the user program's registers, including PC and PS.  */
+
+static int fault_code;
+static REGISTER_TYPE gdb_stack;
+
+resume ()
+{
+  REGISTER_TYPE restore[NUM_REGS];
+
+  PUSH_FRAME_PTR;
+  save_frame_pointer ();
+
+  memcpy (restore, saved_regs, sizeof restore);
+  POP_REGISTERS;
+  /* Control does not drop through here!  */
+}
+
+save_frame_pointer (val)
+     CORE_ADDR val;
+{
+  gdb_stack = val;
+}
+
+/* Fault handlers call here, running in the user program stack.
+   They must first push a fault code,
+   old PC, old PS, and any other info about the fault.
+   The exact format is machine-dependent and is known only
+   in the definition of PUSH_REGISTERS.  */
+
+fault ()
+{
+  /* Transfer all registers and fault code to the stack
+     in canonical order: registers in order of GDB register number,
+     followed by fault code.  */
+  PUSH_REGISTERS;
+
+  /* Transfer them to saved_regs and fault_code.  */
+  save_registers ();
+
+  restore_gdb ();
+  /* Control does not reach here */
+}
+
+restore_gdb ()
+{
+  CORE_ADDR new_fp = gdb_stack;
+  /* Switch to GDB's stack  */
+  POP_FRAME_PTR;
+  /* Return from the function `resume'.  */
+}
+
+/* Assuming register contents and fault code have been pushed on the stack as
+   arguments to this function, copy them into the standard place
+   for the program's registers while GDB is running.  */
+
+save_registers (firstreg)
+     int firstreg;
+{
+  memcpy (saved_regs, &firstreg, sizeof saved_regs);
+  fault_code = (&firstreg)[NUM_REGS];
+}
+
+/* Store into the structure such as `wait' would return
+   the information on why the program faulted,
+   converted into a machine-independent signal number.  */
+
+static int fault_table[] = FAULT_TABLE;
+
+int
+wait (w)
+     WAITTYPE *w;
+{
+  WSETSTOP (*w, fault_table[fault_code / FAULT_CODE_UNITS]);
+  return inferior_pid;
+}
+
+/* Allocate a big space in which files for kdb to read will be stored.
+   Whatever is left is where malloc can allocate storage.
+
+   Initialize it, so that there will be space in the executable file
+   for it.  Then the files can be put into kdb by writing them into
+   kdb's executable file.  */
+
+/* The default size is as much space as we expect to be available
+   for kdb to use!  */
+
+#ifndef HEAP_SIZE
+#define HEAP_SIZE 400000
+#endif
+
+char heap[HEAP_SIZE] = {0};
+
+#ifndef STACK_SIZE
+#define STACK_SIZE 100000
+#endif
+
+int kdb_stack_beg[STACK_SIZE / sizeof (int)];
+int kdb_stack_end;
+
+_initialize_standalone ()
+{
+  register char *next;
+
+  /* Find start of data on files.  */
+
+  files_start = heap;
+
+  /* Find the end of the data on files.  */
+
+  for (next = files_start; * (int *) next; next += * (int *) next) {}
+
+  /* That is where free storage starts for sbrk to give out.  */
+  next_free = next;
+
+  memory_limit = heap + sizeof heap;
+}
+
diff --git a/gdb/stop-gdb.c b/gdb/stop-gdb.c
new file mode 100644
index 0000000..8f22bf9
--- /dev/null
+++ b/gdb/stop-gdb.c
@@ -0,0 +1,110 @@
+/* A client to make GDB return to command level in Mach 3.
+   Copyright (C) 1992, 1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Authors: Jukka Virtanen <jtv@hut.fi> and Peter Stout <pds@cs.cmu.edu>.
+
+   A simple client to make GDB (versions 4.4 and later) on Mach 3 return
+   to the command level when it is waiting for the inferior to stop.
+  
+   Actions: Lookup the send right to the GDB message port from the
+            NetMsgServer.
+
+ 	    Send an asynchronous message with msgh_id
+ 	    GDB_MESSAGE_ID_STOP to that port.
+   */
+
+#include <stdio.h>
+
+#include "defs.h"
+
+#include <mach.h>
+#include <mach/message.h>
+#include <mach_error.h>
+#include <servers/netname.h>
+#include <servers/netname_defs.h>
+
+void
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+  kern_return_t kr;
+  mach_msg_header_t msg;
+  mach_port_t gdb_port;
+  char *host;
+  char *name;
+
+  if (argc == 1)
+    argv[argc++] = GDB_DEF_NAME;
+
+  if (argc != 2)
+    {
+      fprintf (stderr, "Usage : %s <GDB name>\n", argv[0]);
+      exit (1);
+    }
+
+  /* Allow the user to specify a remote host.  */
+  host = strchr (argv[1], '@');
+  if (host)
+    *(host++) = '\0';
+  else
+    host = (char *) "";
+
+  name = malloc (strlen (argv[1]) + sizeof(GDB_NAME_PREFIX));
+  if (name == NULL)
+    {
+      fprintf (stderr, "Unable to allocate memory for name.");
+      exit (1);
+    }
+
+  strcpy (name, GDB_NAME_PREFIX);
+  strcat (name, argv[1]);
+
+  /* Look up the GDB service port.  For convenience, add the
+     GDB_NAME_PREFIX the argument before looking up the name.
+     For backwards compatibility, do it without.  */
+
+  kr = netname_look_up (name_server_port, host, name, &gdb_port);
+  if (kr == NETNAME_NOT_CHECKED_IN)
+    kr = netname_look_up (name_server_port, host, argv[1], &gdb_port);
+  if (kr != KERN_SUCCESS)
+    {
+      fprintf (stderr, "Unable to lookup the GDB service port: %s.\n",
+	       mach_error_string(kr));
+      exit(1);
+    }
+
+  /* Code generated by mig stub generator, with minor cleanups :-)
+
+     simpleroutine stop_inferior(gdb_port : mach_port_t);  */
+
+  msg.msgh_bits = MACH_MSGH_BITS (MACH_MSG_TYPE_COPY_SEND, 0);
+  msg.msgh_remote_port = gdb_port;
+  msg.msgh_local_port  = MACH_PORT_NULL;
+  msg.msgh_size	       = sizeof(msg);
+  msg.msgh_seqno       = 0;
+  msg.msgh_id          = GDB_MESSAGE_ID_STOP;
+
+  kr = mach_msg_send (&msg);
+  if (kr != KERN_SUCCESS)
+    fprintf (stderr, "Message not sent, return code %d : %s\n", kr,
+	     mach_error_string (kr));
+
+  exit (kr != KERN_SUCCESS);
+}
diff --git a/gdb/stuff.c b/gdb/stuff.c
new file mode 100644
index 0000000..eedbeab
--- /dev/null
+++ b/gdb/stuff.c
@@ -0,0 +1,174 @@
+/* Program to stuff files into a specially prepared space in kdb.
+   Copyright (C) 1986, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Written 13-Mar-86 by David Bridgham. */
+
+#include <stdio.h>
+#include <a.out.h>
+#include <sys/types.h>
+#include "gdb_stat.h"
+#include <sys/file.h>
+#include <varargs.h>
+
+main (argc, argv)
+     int argc;
+     char *argv[];
+{
+  register char *cp;
+  char *outfile;
+  register int i;
+  int offset;
+  int out_fd, in_fd;
+  struct stat stat_buf;
+  int size, pad;
+  char buf[1024];
+  static char zeros[4] = {0};
+
+  if (argc < 4)
+    err("Not enough arguments\nUsage: %s -o kdb file1 file2 ...\n",
+	argv[0]);
+
+  outfile = 0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], "-o"))
+	outfile = argv[++i];
+    }
+  if (outfile == 0)
+    err("Output file not specified\n");
+
+  offset = get_offset (outfile, "_heap");
+
+  out_fd = open (outfile, O_WRONLY);
+  if (out_fd < 0)
+    err ("Error opening %s for write: %s\n", outfile, strerror (errno));
+  if (lseek (out_fd, offset, 0) < 0)
+    err ("Error seeking to heap in %s: %s\n", outfile, strerror (errno));
+
+  /* For each file listed on the command line, write it into the
+   * 'heap' of the output file.  Make sure to skip the arguments
+   * that name the output file. */
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], "-o"))
+	continue;
+      if ((in_fd = open (argv[i], O_RDONLY)) < 0)
+	err ("Error opening %s for read: %s\n", argv[i],
+	     strerror (errno));
+      if (fstat (in_fd, &stat_buf) < 0)
+	err ("Error stat'ing %s: %s\n", argv[i], strerror (errno));
+      size = strlen (argv[i]);
+      pad = 4 - (size & 3);
+      size += pad + stat_buf.st_size + sizeof (int);
+      write (out_fd, &size, sizeof (int));
+      write (out_fd, argv[i], strlen (argv[i]));
+      write (out_fd, zeros, pad);
+      while ((size = read (in_fd, buf, sizeof (buf))) > 0)
+	write (out_fd, buf, size);
+      close (in_fd);
+    }
+  size = 0;
+  write (out_fd, &size, sizeof (int));
+  close (out_fd);
+  return (0);
+}
+
+/* Read symbol table from file and returns the offset into the file
+ * where symbol sym_name is located.  If error, print message and
+ * exit. */
+get_offset (file, sym_name)
+     char *file;
+     char *sym_name;
+{
+  int f;
+  struct exec file_hdr;
+  struct nlist *symbol_table;
+  int size;
+  char *strings;
+
+  f = open (file, O_RDONLY);
+  if (f < 0)
+    err ("Error opening %s: %s\n", file, strerror (errno));
+  if (read (f, &file_hdr, sizeof (file_hdr)) < 0)
+    err ("Error reading exec structure: %s\n", strerror (errno));
+  if (N_BADMAG (file_hdr))
+    err ("File %s not an a.out file\n", file);
+
+  /* read in symbol table */
+  if ((symbol_table = (struct nlist *)malloc (file_hdr.a_syms)) == 0)
+    err ("Couldn't allocate space for symbol table\n");
+  if (lseek (f, N_SYMOFF (file_hdr), 0) == -1)
+    err ("lseek error: %s\n", strerror (errno));
+  if (read (f, symbol_table, file_hdr.a_syms) == -1)
+    err ("Error reading symbol table from %s: %s\n", file,
+	 strerror (errno));
+
+  /* read in string table */
+  if (read (f, &size, 4) == -1)
+    err ("reading string table size: %s\n", strerror (errno));
+  if ((strings = (char *)malloc (size)) == 0)
+    err ("Couldn't allocate memory for string table\n");
+  if (read (f, strings, size - 4) == -1)
+    err ("reading string table: %s\n", strerror (errno));
+
+  /* Find the core address at which the first byte of kdb text segment
+     should be loaded into core when kdb is run.  */
+  origin = find_symbol ("_etext", symbol_table, file_hdr.a_syms, strings)
+    - file_hdr.a_text;
+  /* Find the core address at which the heap will appear.  */
+  coreaddr = find_symbol (sym_name, symbol_table, file_hdr.a_syms, strings);
+  /* Return address in file of the heap data space.  */
+  return (N_TXTOFF (file_hdr) + core_addr - origin);
+}
+
+find_symbol (sym_name, symbol_table, length, strings)
+     char *sym_name;
+     struct nlist *symbol_table;
+     int length;
+     char *strings;
+{
+  register struct nlist *sym;
+
+  /* Find symbol in question */
+  for (sym = symbol_table;
+       sym != (struct nlist *)((char *)symbol_table + length);
+       sym++)
+      {
+	if ((sym->n_type & N_TYPE) != N_DATA) continue;
+	if (sym->n_un.n_strx == 0) continue;
+	if (STREQ (sym_name, strings + sym->n_un.n_strx - 4))
+	  return sym->n_value;
+      }
+    err ("Data symbol %s not found in %s\n", sym_name, file);
+}
+
+/* VARARGS */
+void
+err (va_alist)
+     va_dcl
+{
+  va_list args;
+  char *string;
+
+  va_start (args);
+  string = va_arg (args, char *);
+  vfprintf (gdb_stderr, string, args);
+  va_end (args);
+  exit (-1);
+}
diff --git a/gdb/sun3-nat.c b/gdb/sun3-nat.c
new file mode 100644
index 0000000..30f4a44
--- /dev/null
+++ b/gdb/sun3-nat.c
@@ -0,0 +1,157 @@
+/* Host-dependent code for Sun-3 for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "inferior.h"
+#include "gdbcore.h"
+
+#include <sys/ptrace.h>
+#define KERNEL		/* To get floating point reg definitions */
+#include <machine/reg.h>
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+#ifdef FP0_REGNUM
+  struct fp_status inferior_fp_registers;
+#endif
+  extern char registers[];
+
+  registers_fetched ();
+  
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+#ifdef FP0_REGNUM
+  ptrace (PTRACE_GETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+#endif 
+  
+  memcpy (registers, &inferior_registers, 16 * 4);
+#ifdef FP0_REGNUM
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], &inferior_fp_registers,
+	 sizeof inferior_fp_registers.fps_regs);
+#endif 
+  *(int *)&registers[REGISTER_BYTE (PS_REGNUM)] = inferior_registers.r_ps;
+  *(int *)&registers[REGISTER_BYTE (PC_REGNUM)] = inferior_registers.r_pc;
+#ifdef FP0_REGNUM
+  memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	 &inferior_fp_registers.fps_control,
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
+#endif 
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+#ifdef FP0_REGNUM
+  struct fp_status inferior_fp_registers;
+#endif
+  extern char registers[];
+
+  memcpy (&inferior_registers, registers, 16 * 4);
+#ifdef FP0_REGNUM
+  memcpy (&inferior_fp_registers, &registers[REGISTER_BYTE (FP0_REGNUM)],
+	 sizeof inferior_fp_registers.fps_regs);
+#endif
+  inferior_registers.r_ps = *(int *)&registers[REGISTER_BYTE (PS_REGNUM)];
+  inferior_registers.r_pc = *(int *)&registers[REGISTER_BYTE (PC_REGNUM)];
+
+#ifdef FP0_REGNUM
+  memcpy (&inferior_fp_registers.fps_control,
+	 &registers[REGISTER_BYTE (FPC_REGNUM)],
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.fps_regs);
+#endif
+
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+#if FP0_REGNUM
+  ptrace (PTRACE_SETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+#endif
+}
+
+
+/* All of this stuff is only relevant if both host and target are sun3.  */
+/* Machine-dependent code for pulling registers out of a Sun-3 core file. */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;
+     unsigned core_reg_size;
+     int which;
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+  extern char registers[];
+  struct regs *regs = (struct regs *) core_reg_sect;
+
+  if (which == 0) {
+    if (core_reg_size < sizeof (struct regs))
+      error ("Can't find registers in core file");
+
+    memcpy (registers, (char *)regs, 16 * 4);
+    supply_register (PS_REGNUM, (char *)&regs->r_ps);
+    supply_register (PC_REGNUM, (char *)&regs->r_pc);
+
+  } else if (which == 2) {
+
+#define fpustruct  ((struct fpu *) core_reg_sect)
+
+    if (core_reg_size >= sizeof (struct fpu))
+      {
+#ifdef FP0_REGNUM
+	memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	      fpustruct->f_fpstatus.fps_regs,
+	      sizeof fpustruct->f_fpstatus.fps_regs);
+	memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	      &fpustruct->f_fpstatus.fps_control,
+	      sizeof fpustruct->f_fpstatus - 
+		sizeof fpustruct->f_fpstatus.fps_regs);
+#endif
+      }
+    else
+      fprintf_unfiltered (gdb_stderr, "Couldn't read float regs from core file\n");
+  }
+}
+
+
+/* Register that we are able to handle sun3 core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns sun3_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_sun3 ()
+{
+  add_core_fns (&sun3_core_fns);
+}
diff --git a/gdb/sun386-nat.c b/gdb/sun386-nat.c
new file mode 100644
index 0000000..1abb4bb
--- /dev/null
+++ b/gdb/sun386-nat.c
@@ -0,0 +1,258 @@
+/* Native support for Sun 386i's for GDB, the GNU debugger.
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Changes for sun386i by Jean Daniel Fekete (jdf@litp.univ-p6-7.fr),
+   C2V Paris, April 89.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcore.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <sys/user.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+#include <sys/core.h>
+
+
+/* Machine-dependent code which would otherwise be in corefile.c */
+/* Work with core files, for GDB. */
+
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  extern char registers[];
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+
+      {
+	struct core corestr;
+
+	val = myread (corechan, &corestr, sizeof corestr);
+	if (val < 0)
+	  perror_with_name (filename);
+	if (corestr.c_magic != CORE_MAGIC)
+	  error ("\"%s\" does not appear to be a core dump file (magic 0x%x, expected 0x%x)",
+		 filename, corestr.c_magic, (int) CORE_MAGIC);
+	else if (sizeof (struct core) != corestr.c_len)
+	  error ("\"%s\" has an invalid struct core length (%d, expected %d)",
+		 filename, corestr.c_len, (int) sizeof (struct core));
+
+	data_start = exec_data_start;
+	data_end = data_start + corestr.c_dsize;
+	stack_start = stack_end - corestr.c_ssize;
+	data_offset = sizeof corestr;
+	stack_offset = sizeof corestr + corestr.c_dsize;
+
+	memcpy (registers, &corestr.c_regs, sizeof corestr.c_regs);
+
+	memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)],
+	       corestr.c_fpu.f_fpstatus.f_st,
+	       sizeof corestr.c_fpu.f_fpstatus.f_st);
+	memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	       &corestr.c_fpu.f_fpstatus.f_ctrl,
+	       sizeof corestr.c_fpu.f_fpstatus -
+	       sizeof corestr.c_fpu.f_fpstatus.f_st);
+
+	/* the struct aouthdr of sun coff is not the struct exec stored
+	   in the core file. */
+	memcpy (&core_aouthdr, &corestr.c_aouthdr, sizeof (struct exec));
+#ifndef COFF_ENCAPSULATE
+	core_aouthdr.magic = corestr.c_aouthdr.a_info;
+	core_aouthdr.vstamp = /*SUNVERSION*/ 31252;
+#endif
+	printf_unfiltered ("Core file is from \"%s\".\n", corestr.c_cmdname);
+	if (corestr.c_signo > 0)
+	  printf_unfiltered ("Program terminated with signal %d, %s.\n",
+		  corestr.c_signo, safe_strsignal (corestr.c_signo));
+      }
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	{
+	  corefile = concat (current_directory, "/", filename, NULL);
+	}
+
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+
+      validate_files ();
+    }
+  else if (from_tty)
+    printf_unfiltered ("No core file now.\n");
+}
+
+i387_to_double (from, to)
+     char *from;
+     char *to;
+{
+  long *lp;
+  /* push extended mode on 387 stack, then pop in double mode
+   *
+   * first, set exception masks so no error is generated -
+   * number will be rounded to inf or 0, if necessary 
+   */
+  asm ("pushl %eax"); 		/* grab a stack slot */
+  asm ("fstcw (%esp)");		/* get 387 control word */
+  asm ("movl (%esp),%eax");	/* save old value */
+  asm ("orl $0x3f,%eax");		/* mask all exceptions */
+  asm ("pushl %eax");
+  asm ("fldcw (%esp)");		/* load new value into 387 */
+  
+  asm ("movl 8(%ebp),%eax");
+  asm ("fldt (%eax)");		/* push extended number on 387 stack */
+  asm ("fwait");
+  asm ("movl 12(%ebp),%eax");
+  asm ("fstpl (%eax)");		/* pop double */
+  asm ("fwait");
+  
+  asm ("popl %eax");		/* flush modified control word */
+  asm ("fnclex");			/* clear exceptions */
+  asm ("fldcw (%esp)");		/* restore original control word */
+  asm ("popl %eax");		/* flush saved copy */
+}
+
+double_to_i387 (from, to)
+     char *from;
+     char *to;
+{
+  /* push double mode on 387 stack, then pop in extended mode
+   * no errors are possible because every 64-bit pattern
+   * can be converted to an extended
+   */
+  asm ("movl 8(%ebp),%eax");
+  asm ("fldl (%eax)");
+  asm ("fwait");
+  asm ("movl 12(%ebp),%eax");
+  asm ("fstpt (%eax)");
+  asm ("fwait");
+}
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+  struct fp_state inferior_fp_registers;
+  extern char registers[];
+
+  registers_fetched ();
+
+  ptrace (PTRACE_GETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+  ptrace (PTRACE_GETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+
+  memcpy (registers, &inferior_registers, sizeof inferior_registers);
+
+  memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)],inferior_fp_registers.f_st,
+	 sizeof inferior_fp_registers.f_st);
+  memcpy (&registers[REGISTER_BYTE (FPC_REGNUM)],
+	 &inferior_fp_registers.f_ctrl,
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
+}
+
+/* Store our register values back into the inferior.
+   If REGNO is -1, do this for all registers.
+   Otherwise, REGNO specifies which register (so we can save time).  */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  struct regs inferior_registers;
+  struct fp_state inferior_fp_registers;
+  extern char registers[];
+
+  memcpy (&inferior_registers, registers, 20 * 4);
+
+  memcpy (inferior_fp_registers.f_st,
+	 &registers[REGISTER_BYTE (FP0_REGNUM)],
+	 sizeof inferior_fp_registers.f_st);
+  memcpy (&inferior_fp_registers.f_ctrl,
+	 &registers[REGISTER_BYTE (FPC_REGNUM)],
+	 sizeof inferior_fp_registers - sizeof inferior_fp_registers.f_st);
+  
+#ifdef PTRACE_FP_BUG
+  if (regno == FP_REGNUM || regno == -1)
+    /* Storing the frame pointer requires a gross hack, in which an
+       instruction that moves eax into ebp gets single-stepped.  */
+    {
+      int stack = inferior_registers.r_reg[SP_REGNUM];
+      int stuff = ptrace (PTRACE_PEEKDATA, inferior_pid,
+			  (PTRACE_ARG3_TYPE) stack);
+      int reg = inferior_registers.r_reg[EAX];
+      inferior_registers.r_reg[EAX] =
+	inferior_registers.r_reg[FP_REGNUM];
+      ptrace (PTRACE_SETREGS, inferior_pid, 
+	      (PTRACE_ARG3_TYPE) &inferior_registers);
+      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack,
+	      0xc589);
+      ptrace (PTRACE_SINGLESTEP, inferior_pid, (PTRACE_ARG3_TYPE) stack,
+	      0);
+      wait (0);
+      ptrace (PTRACE_POKEDATA, inferior_pid, (PTRACE_ARG3_TYPE) stack,
+	      stuff);
+      inferior_registers.r_reg[EAX] = reg;
+    }
+#endif
+  ptrace (PTRACE_SETREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_registers);
+  ptrace (PTRACE_SETFPREGS, inferior_pid,
+	  (PTRACE_ARG3_TYPE) &inferior_fp_registers);
+}
diff --git a/gdb/symfile.c b/gdb/symfile.c
new file mode 100644
index 0000000..ee60c93
--- /dev/null
+++ b/gdb/symfile.c
@@ -0,0 +1,3021 @@
+/* Generic symbol file reading for the GNU debugger, GDB.
+   Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1998
+   Free Software Foundation, Inc.
+   Contributed by Cygnus Support, using pieces from other GDB modules.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "target.h"
+#include "value.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbcmd.h"
+#include "breakpoint.h"
+#include "language.h"
+#include "complaints.h"
+#include "demangle.h"
+#include "inferior.h" /* for write_pc */
+#include "gdb-stabs.h"
+#include "obstack.h"
+
+#include <assert.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+#include <time.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+#ifdef HPUXHPPA
+
+/* Some HP-UX related globals to clear when a new "main"
+   symbol file is loaded. HP-specific.  */
+
+extern int hp_som_som_object_present;
+extern int hp_cxx_exception_support_initialized;
+#define RESET_HP_UX_GLOBALS() do {\
+                                    hp_som_som_object_present = 0;             /* indicates HP-compiled code */        \
+                                    hp_cxx_exception_support_initialized = 0;  /* must reinitialize exception stuff */ \
+                              } while (0)
+#endif
+
+int (*ui_load_progress_hook) PARAMS ((char *, unsigned long));
+void (*pre_add_symbol_hook) PARAMS ((char *));
+void (*post_add_symbol_hook) PARAMS ((void));
+
+/* Global variables owned by this file */
+int readnow_symbol_files;		/* Read full symbols immediately */
+
+struct complaint oldsyms_complaint = {
+  "Replacing old symbols for `%s'", 0, 0
+};
+
+struct complaint empty_symtab_complaint = {
+  "Empty symbol table found for `%s'", 0, 0
+};
+
+/* External variables and functions referenced. */
+
+extern int info_verbose;
+
+extern void report_transfer_performance PARAMS ((unsigned long,
+						 time_t, time_t));
+
+/* Functions this file defines */
+
+#if 0
+static int simple_read_overlay_region_table PARAMS ((void));
+static void simple_free_overlay_region_table PARAMS ((void));
+#endif
+
+static void set_initial_language PARAMS ((void));
+
+static void load_command PARAMS ((char *, int));
+
+static void add_symbol_file_command PARAMS ((char *, int));
+
+static void add_shared_symbol_files_command PARAMS ((char *, int));
+
+static void cashier_psymtab PARAMS ((struct partial_symtab *));
+
+static int compare_psymbols PARAMS ((const void *, const void *));
+
+static int compare_symbols PARAMS ((const void *, const void *));
+
+bfd *symfile_bfd_open PARAMS ((char *));
+
+static void find_sym_fns PARAMS ((struct objfile *));
+
+static void decrement_reading_symtab PARAMS ((void *));
+
+static void overlay_invalidate_all PARAMS ((void));
+
+static int overlay_is_mapped PARAMS ((struct obj_section *));
+
+void list_overlays_command PARAMS ((char *, int));
+
+void map_overlay_command PARAMS ((char *, int));
+
+void unmap_overlay_command PARAMS ((char *, int));
+
+static void overlay_auto_command PARAMS ((char *, int));
+
+static void overlay_manual_command PARAMS ((char *, int));
+
+static void overlay_off_command PARAMS ((char *, int));
+
+static void overlay_load_command PARAMS ((char *, int));
+
+static void overlay_command PARAMS ((char *, int));
+
+static void simple_free_overlay_table PARAMS ((void));
+
+static void read_target_long_array PARAMS ((CORE_ADDR, unsigned int *, int));
+
+static int simple_read_overlay_table PARAMS ((void));
+
+static int simple_overlay_update_1 PARAMS ((struct obj_section *));
+
+void _initialize_symfile PARAMS ((void));
+
+/* List of all available sym_fns.  On gdb startup, each object file reader
+   calls add_symtab_fns() to register information on each format it is
+   prepared to read. */
+
+static struct sym_fns *symtab_fns = NULL;
+
+/* Flag for whether user will be reloading symbols multiple times.
+   Defaults to ON for VxWorks, otherwise OFF.  */
+
+#ifdef SYMBOL_RELOADING_DEFAULT
+int symbol_reloading = SYMBOL_RELOADING_DEFAULT;
+#else
+int symbol_reloading = 0;
+#endif
+
+/* If non-zero, then on HP-UX (i.e., platforms that use somsolib.c),
+   this variable is interpreted as a threshhold.  If adding a new
+   library's symbol table to those already known to the debugger would
+   exceed this threshhold, then the shlib's symbols are not added.
+
+   If non-zero on other platforms, shared library symbols will be added
+   automatically when the inferior is created, new libraries are loaded,
+   or when attaching to the inferior.  This is almost always what users
+   will want to have happen; but for very large programs, the startup
+   time will be excessive, and so if this is a problem, the user can
+   clear this flag and then add the shared library symbols as needed.
+   Note that there is a potential for confusion, since if the shared
+   library symbols are not loaded, commands like "info fun" will *not*
+   report all the functions that are actually present. 
+
+   Note that HP-UX interprets this variable to mean, "threshhold size
+   in megabytes, where zero means never add".  Other platforms interpret
+   this variable to mean, "always add if non-zero, never add if zero."
+   */
+
+int auto_solib_add = 1;
+
+
+/* Since this function is called from within qsort, in an ANSI environment
+   it must conform to the prototype for qsort, which specifies that the
+   comparison function takes two "void *" pointers. */
+
+static int
+compare_symbols (s1p, s2p)
+     const PTR s1p;
+     const PTR s2p;
+{
+  register struct symbol **s1, **s2;
+
+  s1 = (struct symbol **) s1p;
+  s2 = (struct symbol **) s2p;
+
+  return (STRCMP (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2)));
+}
+
+/*
+
+LOCAL FUNCTION
+
+	compare_psymbols -- compare two partial symbols by name
+
+DESCRIPTION
+
+	Given pointers to pointers to two partial symbol table entries,
+	compare them by name and return -N, 0, or +N (ala strcmp).
+	Typically used by sorting routines like qsort().
+
+NOTES
+
+	Does direct compare of first two characters before punting
+	and passing to strcmp for longer compares.  Note that the
+	original version had a bug whereby two null strings or two
+	identically named one character strings would return the
+	comparison of memory following the null byte.
+
+ */
+
+static int
+compare_psymbols (s1p, s2p)
+     const PTR s1p;
+     const PTR s2p;
+{
+  register char *st1 = SYMBOL_NAME (*(struct partial_symbol **) s1p);
+  register char *st2 = SYMBOL_NAME (*(struct partial_symbol **) s2p);
+
+  if ((st1[0] - st2[0]) || !st1[0])
+    {
+      return (st1[0] - st2[0]);
+    }
+  else if ((st1[1] - st2[1]) || !st1[1])
+    {
+      return (st1[1] - st2[1]);
+    }
+  else
+    {
+      /* Note: I replaced the STRCMP line (commented out below)
+       * with a simpler "strcmp()" which compares the 2 strings
+       * from the beginning. (STRCMP is a macro which first compares
+       * the initial characters, then falls back on strcmp).
+       * The reason is that the STRCMP line was tickling a C compiler
+       * bug on HP-UX 10.30, which is avoided with the simpler
+       * code. The performance gain from the more complicated code
+       * is negligible, given that we have already checked the
+       * initial 2 characters above. I reported the compiler bug,
+       * and once it is fixed the original line can be put back. RT
+       */
+      /* return ( STRCMP (st1 + 2, st2 + 2)); */
+      return ( strcmp (st1, st2));
+    }
+}
+
+void
+sort_pst_symbols (pst)
+     struct partial_symtab *pst;
+{
+  /* Sort the global list; don't sort the static list */
+
+  qsort (pst -> objfile -> global_psymbols.list + pst -> globals_offset,
+	 pst -> n_global_syms, sizeof (struct partial_symbol *),
+	 compare_psymbols);
+}
+
+/* Call sort_block_syms to sort alphabetically the symbols of one block.  */
+
+void
+sort_block_syms (b)
+     register struct block *b;
+{
+  qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b),
+	 sizeof (struct symbol *), compare_symbols);
+}
+
+/* Call sort_symtab_syms to sort alphabetically
+   the symbols of each block of one symtab.  */
+
+void
+sort_symtab_syms (s)
+     register struct symtab *s;
+{
+  register struct blockvector *bv;
+  int nbl;
+  int i;
+  register struct block *b;
+
+  if (s == 0)
+    return;
+  bv = BLOCKVECTOR (s);
+  nbl = BLOCKVECTOR_NBLOCKS (bv);
+  for (i = 0; i < nbl; i++)
+    {
+      b = BLOCKVECTOR_BLOCK (bv, i);
+      if (BLOCK_SHOULD_SORT (b))
+	sort_block_syms (b);
+    }
+}
+
+/* Make a null terminated copy of the string at PTR with SIZE characters in
+   the obstack pointed to by OBSTACKP .  Returns the address of the copy.
+   Note that the string at PTR does not have to be null terminated, I.E. it
+   may be part of a larger string and we are only saving a substring. */
+
+char *
+obsavestring (ptr, size, obstackp)
+     char *ptr;
+     int size;
+     struct obstack *obstackp;
+{
+  register char *p = (char *) obstack_alloc (obstackp, size + 1);
+  /* Open-coded memcpy--saves function call time.  These strings are usually
+     short.  FIXME: Is this really still true with a compiler that can
+     inline memcpy? */
+  {
+    register char *p1 = ptr;
+    register char *p2 = p;
+    char *end = ptr + size;
+    while (p1 != end)
+      *p2++ = *p1++;
+  }
+  p[size] = 0;
+  return p;
+}
+
+/* Concatenate strings S1, S2 and S3; return the new string.  Space is found
+   in the obstack pointed to by OBSTACKP.  */
+
+char *
+obconcat (obstackp, s1, s2, s3)
+     struct obstack *obstackp;
+     const char *s1, *s2, *s3;
+{
+  register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
+  register char *val = (char *) obstack_alloc (obstackp, len);
+  strcpy (val, s1);
+  strcat (val, s2);
+  strcat (val, s3);
+  return val;
+}
+
+/* True if we are nested inside psymtab_to_symtab. */
+
+int currently_reading_symtab = 0;
+
+static void
+decrement_reading_symtab (dummy)
+     void *dummy;
+{
+  currently_reading_symtab--;
+}
+
+/* Get the symbol table that corresponds to a partial_symtab.
+   This is fast after the first time you do it.  In fact, there
+   is an even faster macro PSYMTAB_TO_SYMTAB that does the fast
+   case inline.  */
+
+struct symtab *
+psymtab_to_symtab (pst)
+     register struct partial_symtab *pst;
+{
+  /* If it's been looked up before, return it. */
+  if (pst->symtab)
+    return pst->symtab;
+
+  /* If it has not yet been read in, read it.  */
+  if (!pst->readin)
+    { 
+      struct cleanup *back_to = make_cleanup (decrement_reading_symtab, NULL);
+      currently_reading_symtab++;
+      (*pst->read_symtab) (pst);
+      do_cleanups (back_to);
+    }
+
+  return pst->symtab;
+}
+
+/* Initialize entry point information for this objfile. */
+
+void
+init_entry_point_info (objfile)
+     struct objfile *objfile;
+{
+  /* Save startup file's range of PC addresses to help blockframe.c
+     decide where the bottom of the stack is.  */
+
+  if (bfd_get_file_flags (objfile -> obfd) & EXEC_P)
+    {
+      /* Executable file -- record its entry point so we'll recognize
+	 the startup file because it contains the entry point.  */
+      objfile -> ei.entry_point = bfd_get_start_address (objfile -> obfd);
+    }
+  else
+    {
+      /* Examination of non-executable.o files.  Short-circuit this stuff.  */
+      objfile -> ei.entry_point = INVALID_ENTRY_POINT;
+    }
+  objfile -> ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
+  objfile -> ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
+  objfile -> ei.entry_func_lowpc = INVALID_ENTRY_LOWPC;
+  objfile -> ei.entry_func_highpc = INVALID_ENTRY_HIGHPC;
+  objfile -> ei.main_func_lowpc = INVALID_ENTRY_LOWPC;
+  objfile -> ei.main_func_highpc = INVALID_ENTRY_HIGHPC;
+}
+
+/* Get current entry point address.  */
+
+CORE_ADDR
+entry_point_address()
+{
+  return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
+}
+
+/* Remember the lowest-addressed loadable section we've seen.  
+   This function is called via bfd_map_over_sections. 
+
+   In case of equal vmas, the section with the largest size becomes the
+   lowest-addressed loadable section.
+
+   If the vmas and sizes are equal, the last section is considered the
+   lowest-addressed loadable section.  */
+
+void
+find_lowest_section (abfd, sect, obj)
+     bfd *abfd;
+     asection *sect;
+     PTR obj;
+{
+  asection **lowest = (asection **)obj;
+
+  if (0 == (bfd_get_section_flags (abfd, sect) & SEC_LOAD))
+    return;
+  if (!*lowest)
+    *lowest = sect;		/* First loadable section */
+  else if (bfd_section_vma (abfd, *lowest) > bfd_section_vma (abfd, sect))
+    *lowest = sect;		/* A lower loadable section */
+  else if (bfd_section_vma (abfd, *lowest) == bfd_section_vma (abfd, sect)
+	   && (bfd_section_size (abfd, (*lowest))
+	       <= bfd_section_size (abfd, sect)))
+    *lowest = sect;
+}
+
+/* Parse the user's idea of an offset for dynamic linking, into our idea
+   of how to represent it for fast symbol reading.  This is the default 
+   version of the sym_fns.sym_offsets function for symbol readers that
+   don't need to do anything special.  It allocates a section_offsets table
+   for the objectfile OBJFILE and stuffs ADDR into all of the offsets.  */
+
+struct section_offsets *
+default_symfile_offsets (objfile, addr)
+     struct objfile *objfile;
+     CORE_ADDR addr;
+{
+  struct section_offsets *section_offsets;
+  int i;
+
+  objfile->num_sections = SECT_OFF_MAX;
+  section_offsets = (struct section_offsets *)
+    obstack_alloc (&objfile -> psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+
+  for (i = 0; i < SECT_OFF_MAX; i++)
+    ANOFFSET (section_offsets, i) = addr;
+  
+  return section_offsets;
+}
+
+
+/* Process a symbol file, as either the main file or as a dynamically
+   loaded file.
+
+   NAME is the file name (which will be tilde-expanded and made
+   absolute herein) (but we don't free or modify NAME itself).
+   FROM_TTY says how verbose to be.  MAINLINE specifies whether this
+   is the main symbol file, or whether it's an extra symbol file such
+   as dynamically loaded code.  If !mainline, ADDR is the address
+   where the text segment was loaded.  If VERBO, the caller has printed
+   a verbose message about the symbol reading (and complaints can be
+   more terse about it).  */
+
+void
+syms_from_objfile (objfile, addr, mainline, verbo)
+     struct objfile *objfile;
+     CORE_ADDR addr;
+     int mainline;
+     int verbo;
+{
+  struct section_offsets *section_offsets;
+  asection *lowest_sect;
+  struct cleanup *old_chain;
+
+  init_entry_point_info (objfile);
+  find_sym_fns (objfile);
+
+  /* Make sure that partially constructed symbol tables will be cleaned up
+     if an error occurs during symbol reading.  */
+  old_chain = make_cleanup ((make_cleanup_func) free_objfile, objfile);
+
+  if (mainline) 
+    {
+      /* We will modify the main symbol table, make sure that all its users
+	 will be cleaned up if an error occurs during symbol reading.  */
+      make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+      /* Since no error yet, throw away the old symbol table.  */
+
+      if (symfile_objfile != NULL)
+	{
+	  free_objfile (symfile_objfile);
+	  symfile_objfile = NULL;
+	}
+
+      /* Currently we keep symbols from the add-symbol-file command.
+	 If the user wants to get rid of them, they should do "symbol-file"
+	 without arguments first.  Not sure this is the best behavior
+	 (PR 2207).  */
+
+      (*objfile -> sf -> sym_new_init) (objfile);
+    }
+
+  /* Convert addr into an offset rather than an absolute address.
+     We find the lowest address of a loaded segment in the objfile,
+     and assume that <addr> is where that got loaded.  Due to historical
+     precedent, we warn if that doesn't happen to be a text segment.  */
+
+  if (mainline)
+    {
+      addr = 0;		/* No offset from objfile addresses.  */
+    }
+  else
+    {
+      lowest_sect = bfd_get_section_by_name (objfile->obfd, ".text");
+      if (lowest_sect == NULL)
+	bfd_map_over_sections (objfile->obfd, find_lowest_section,
+			       (PTR) &lowest_sect);
+
+      if (lowest_sect == NULL)
+	warning ("no loadable sections found in added symbol-file %s",
+		 objfile->name);
+      else if ((bfd_get_section_flags (objfile->obfd, lowest_sect) & SEC_CODE)
+	       == 0)
+	/* FIXME-32x64--assumes bfd_vma fits in long.  */
+	warning ("Lowest section in %s is %s at 0x%lx",
+		 objfile->name,
+		 bfd_section_name (objfile->obfd, lowest_sect),
+		 (unsigned long) bfd_section_vma (objfile->obfd, lowest_sect));
+
+      if (lowest_sect)
+	addr -= bfd_section_vma (objfile->obfd, lowest_sect);
+    }
+
+  /* Initialize symbol reading routines for this objfile, allow complaints to
+     appear for this new file, and record how verbose to be, then do the
+     initial symbol reading for this file. */
+
+  (*objfile -> sf -> sym_init) (objfile);
+  clear_complaints (1, verbo);
+
+  section_offsets = (*objfile -> sf -> sym_offsets) (objfile, addr);
+  objfile->section_offsets = section_offsets;
+
+#ifndef IBM6000_TARGET
+  /* This is a SVR4/SunOS specific hack, I think.  In any event, it
+     screws RS/6000.  sym_offsets should be doing this sort of thing,
+     because it knows the mapping between bfd sections and
+     section_offsets.  */
+  /* This is a hack.  As far as I can tell, section offsets are not
+     target dependent.  They are all set to addr with a couple of
+     exceptions.  The exceptions are sysvr4 shared libraries, whose
+     offsets are kept in solib structures anyway and rs6000 xcoff
+     which handles shared libraries in a completely unique way.
+
+     Section offsets are built similarly, except that they are built
+     by adding addr in all cases because there is no clear mapping
+     from section_offsets into actual sections.  Note that solib.c
+     has a different algorythm for finding section offsets.
+
+     These should probably all be collapsed into some target
+     independent form of shared library support.  FIXME.  */
+
+  if (addr)
+    {
+      struct obj_section *s;
+
+      for (s = objfile->sections; s < objfile->sections_end; ++s)
+	{
+	  s->addr -= s->offset;
+	  s->addr += addr;
+	  s->endaddr -= s->offset;
+	  s->endaddr += addr;
+	  s->offset += addr;
+	}
+    }
+#endif /* not IBM6000_TARGET */
+
+  (*objfile -> sf -> sym_read) (objfile, section_offsets, mainline);
+
+  if (!have_partial_symbols () && !have_full_symbols ())
+    {
+      wrap_here ("");
+      printf_filtered ("(no debugging symbols found)...");
+      wrap_here ("");
+    }
+
+  /* Don't allow char * to have a typename (else would get caddr_t).
+     Ditto void *.  FIXME: Check whether this is now done by all the
+     symbol readers themselves (many of them now do), and if so remove
+     it from here.  */
+
+  TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
+  TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
+
+  /* Mark the objfile has having had initial symbol read attempted.  Note
+     that this does not mean we found any symbols... */
+
+  objfile -> flags |= OBJF_SYMS;
+
+  /* Discard cleanups as symbol reading was successful.  */
+
+  discard_cleanups (old_chain);
+
+/* Call this after reading in a new symbol table to give target dependant code
+   a crack at the new symbols.  For instance, this could be used to update the
+   values of target-specific symbols GDB needs to keep track of (such as
+   _sigtramp, or whatever).  */
+
+  TARGET_SYMFILE_POSTREAD (objfile);
+}
+
+/* Perform required actions after either reading in the initial
+   symbols for a new objfile, or mapping in the symbols from a reusable
+   objfile. */
+   
+void
+new_symfile_objfile (objfile, mainline, verbo)
+     struct objfile *objfile;
+     int mainline;
+     int verbo;
+{
+
+  /* If this is the main symbol file we have to clean up all users of the
+     old main symbol file. Otherwise it is sufficient to fixup all the
+     breakpoints that may have been redefined by this symbol file.  */
+  if (mainline)
+    {
+      /* OK, make it the "real" symbol file.  */
+      symfile_objfile = objfile;
+
+      clear_symtab_users ();
+    }
+  else
+    {
+      breakpoint_re_set ();
+    }
+
+  /* We're done reading the symbol file; finish off complaints.  */
+  clear_complaints (0, verbo);
+}
+
+/* Process a symbol file, as either the main file or as a dynamically
+   loaded file.
+
+   NAME is the file name (which will be tilde-expanded and made
+   absolute herein) (but we don't free or modify NAME itself).
+   FROM_TTY says how verbose to be.  MAINLINE specifies whether this
+   is the main symbol file, or whether it's an extra symbol file such
+   as dynamically loaded code.  If !mainline, ADDR is the address
+   where the text segment was loaded.
+
+   USER_LOADED is TRUE if the add-symbol-file command was how this
+   symbol file came to be processed.
+
+   IS_SOLIB is TRUE if this symbol file represents a solib, as discovered
+   by the target's implementation of the solib package.
+
+   Upon success, returns a pointer to the objfile that was added.
+   Upon failure, jumps back to command level (never returns). */
+
+struct objfile *
+symbol_file_add (name, from_tty, addr, mainline, mapped, readnow, user_loaded, is_solib)
+     char *name;
+     int from_tty;
+     CORE_ADDR addr;
+     int mainline;
+     int mapped;
+     int readnow;
+     int  user_loaded;
+     int  is_solib;
+{
+  struct objfile *objfile;
+  struct partial_symtab *psymtab;
+  bfd *abfd;
+
+  /* Open a bfd for the file, and give user a chance to burp if we'd be
+     interactively wiping out any existing symbols.  */
+
+  abfd = symfile_bfd_open (name);
+
+  if ((have_full_symbols () || have_partial_symbols ())
+      && mainline
+      && from_tty
+      && !query ("Load new symbol table from \"%s\"? ", name))
+      error ("Not confirmed.");
+
+  objfile = allocate_objfile (abfd, mapped, user_loaded, is_solib);
+
+  /* If the objfile uses a mapped symbol file, and we have a psymtab for
+     it, then skip reading any symbols at this time. */
+
+  if ((objfile -> flags & OBJF_MAPPED) && (objfile -> flags & OBJF_SYMS))
+    {
+      /* We mapped in an existing symbol table file that already has had
+	 initial symbol reading performed, so we can skip that part.  Notify
+	 the user that instead of reading the symbols, they have been mapped.
+	 */
+      if (from_tty || info_verbose)
+	{
+	  printf_filtered ("Mapped symbols for %s...", name);
+	  wrap_here ("");
+	  gdb_flush (gdb_stdout);
+	}
+      init_entry_point_info (objfile);
+      find_sym_fns (objfile);
+    }
+  else
+    {
+      /* We either created a new mapped symbol table, mapped an existing
+	 symbol table file which has not had initial symbol reading
+	 performed, or need to read an unmapped symbol table. */
+      if (from_tty || info_verbose)
+	{
+	  if (pre_add_symbol_hook)
+	    pre_add_symbol_hook (name);
+	  else
+	    {
+	      printf_filtered ("Reading symbols from %s...", name);
+	      wrap_here ("");
+	      gdb_flush (gdb_stdout);
+	    }
+	}
+      syms_from_objfile (objfile, addr, mainline, from_tty);
+    }
+
+  /* We now have at least a partial symbol table.  Check to see if the
+     user requested that all symbols be read on initial access via either
+     the gdb startup command line or on a per symbol file basis.  Expand
+     all partial symbol tables for this objfile if so. */
+
+  if (readnow || readnow_symbol_files)
+    {
+      if (from_tty || info_verbose)
+	{
+	  printf_filtered ("expanding to full symbols...");
+	  wrap_here ("");
+	  gdb_flush (gdb_stdout);
+	}
+
+      for (psymtab = objfile -> psymtabs;
+	   psymtab != NULL;
+	   psymtab = psymtab -> next)
+	{
+	  psymtab_to_symtab (psymtab);
+	}
+    }
+
+  if (from_tty || info_verbose)
+    {
+      if (post_add_symbol_hook)
+        post_add_symbol_hook ();
+      else
+        {
+          printf_filtered ("done.\n");
+          gdb_flush (gdb_stdout);
+        }
+    }
+
+  new_symfile_objfile (objfile, mainline, from_tty);
+
+  target_new_objfile (objfile);
+
+  return (objfile);
+}
+
+/* This is the symbol-file command.  Read the file, analyze its
+   symbols, and add a struct symtab to a symtab list.  The syntax of
+   the command is rather bizarre--(1) buildargv implements various
+   quoting conventions which are undocumented and have little or
+   nothing in common with the way things are quoted (or not quoted)
+   elsewhere in GDB, (2) options are used, which are not generally
+   used in GDB (perhaps "set mapped on", "set readnow on" would be
+   better), (3) the order of options matters, which is contrary to GNU
+   conventions (because it is confusing and inconvenient).  */
+
+void
+symbol_file_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  char *name = NULL;
+  CORE_ADDR text_relocation = 0;		/* text_relocation */
+  struct cleanup *cleanups;
+  int mapped = 0;
+  int readnow = 0;
+
+  dont_repeat ();
+
+  if (args == NULL)
+    {
+      if ((have_full_symbols () || have_partial_symbols ())
+	  && from_tty
+	  && !query ("Discard symbol table from `%s'? ",
+		     symfile_objfile -> name))
+	error ("Not confirmed.");
+      free_all_objfiles ();
+
+      /* solib descriptors may have handles to objfiles.  Since their
+         storage has just been released, we'd better wipe the solib
+         descriptors as well.
+         */
+#if defined(SOLIB_RESTART)
+      SOLIB_RESTART ();
+#endif
+
+      symfile_objfile = NULL;
+      if (from_tty)
+	{
+	  printf_unfiltered ("No symbol file now.\n");
+	}
+#ifdef HPUXHPPA
+      RESET_HP_UX_GLOBALS ();
+#endif
+    }
+  else
+    {
+      if ((argv = buildargv (args)) == NULL)
+	{
+	  nomem (0);
+	}
+      cleanups = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+      while (*argv != NULL)
+	{
+	  if (STREQ (*argv, "-mapped"))
+	    {
+	      mapped = 1;
+	    }
+	  else if (STREQ (*argv, "-readnow"))
+	    {
+	      readnow = 1;
+	    }
+	  else if (**argv == '-')
+	    {
+	      error ("unknown option `%s'", *argv);
+	    }
+	  else
+	    {
+            char *p;
+
+              name = *argv;
+
+              /* this is for rombug remote only, to get the text relocation by
+              using link command */
+              p = strrchr(name, '/');
+              if (p != NULL) p++;
+              else p = name;
+
+              target_link(p, &text_relocation);
+
+              if (text_relocation == (CORE_ADDR)0)
+                return;
+              else if (text_relocation == (CORE_ADDR)-1)
+                {
+                  symbol_file_add (name, from_tty, (CORE_ADDR)0, 
+                                   1, mapped, readnow, 1, 0);
+#ifdef HPUXHPPA
+                  RESET_HP_UX_GLOBALS ();
+#endif
+                }
+              else
+                symbol_file_add (name, from_tty, (CORE_ADDR)text_relocation,
+				 0, mapped, readnow, 1, 0);
+
+	      /* Getting new symbols may change our opinion about what is
+		 frameless.  */
+	      reinit_frame_cache ();
+
+              set_initial_language ();
+	    }
+	  argv++;
+	}
+
+      if (name == NULL)
+	{
+	  error ("no symbol file name was specified");
+	}
+      TUIDO(((TuiOpaqueFuncPtr)tuiDisplayMainFunction));
+      do_cleanups (cleanups);
+    }
+}
+
+/* Set the initial language.
+
+   A better solution would be to record the language in the psymtab when reading
+   partial symbols, and then use it (if known) to set the language.  This would
+   be a win for formats that encode the language in an easily discoverable place,
+   such as DWARF.  For stabs, we can jump through hoops looking for specially
+   named symbols or try to intuit the language from the specific type of stabs
+   we find, but we can't do that until later when we read in full symbols.
+   FIXME.  */
+
+static void
+set_initial_language ()
+{
+  struct partial_symtab *pst;
+  enum language lang = language_unknown;  	
+
+  pst = find_main_psymtab ();
+  if (pst != NULL)
+    {
+      if (pst -> filename != NULL)
+	{
+	  lang = deduce_language_from_filename (pst -> filename);
+        }
+      if (lang == language_unknown)
+	{
+	    /* Make C the default language */
+	    lang = language_c;
+	}
+      set_language (lang);
+      expected_language = current_language;	/* Don't warn the user */
+    }
+}
+
+/* Open file specified by NAME and hand it off to BFD for preliminary
+   analysis.  Result is a newly initialized bfd *, which includes a newly
+   malloc'd` copy of NAME (tilde-expanded and made absolute).
+   In case of trouble, error() is called.  */
+
+bfd *
+symfile_bfd_open (name)
+     char *name;
+{
+  bfd *sym_bfd;
+  int desc;
+  char *absolute_name;
+
+
+
+  name = tilde_expand (name);	/* Returns 1st new malloc'd copy */
+
+  /* Look down path for it, allocate 2nd new malloc'd copy.  */
+  desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+#if defined(__GO32__) || defined(_WIN32)
+  if (desc < 0)
+    {
+      char *exename = alloca (strlen (name) + 5);
+      strcat (strcpy (exename, name), ".exe");
+      desc = openp (getenv ("PATH"), 1, exename, O_RDONLY | O_BINARY,
+                    0, &absolute_name);
+    }
+#endif
+  if (desc < 0)
+    {
+      make_cleanup (free, name);
+      perror_with_name (name);
+    }
+  free (name);			/* Free 1st new malloc'd copy */
+  name = absolute_name;		/* Keep 2nd malloc'd copy in bfd */
+				/* It'll be freed in free_objfile(). */
+
+  sym_bfd = bfd_fdopenr (name, gnutarget, desc);
+  if (!sym_bfd)
+    {
+      close (desc);
+      make_cleanup (free, name);
+      error ("\"%s\": can't open to read symbols: %s.", name,
+	     bfd_errmsg (bfd_get_error ()));
+    }
+  sym_bfd->cacheable = true;
+
+  if (!bfd_check_format (sym_bfd, bfd_object))
+    {
+      /* FIXME: should be checking for errors from bfd_close (for one thing,
+	 on error it does not free all the storage associated with the
+	 bfd).  */
+      bfd_close (sym_bfd);	/* This also closes desc */
+      make_cleanup (free, name);
+      error ("\"%s\": can't read symbols: %s.", name,
+	     bfd_errmsg (bfd_get_error ()));
+    }
+  return (sym_bfd);
+}
+
+/* Link a new symtab_fns into the global symtab_fns list.  Called on gdb
+   startup by the _initialize routine in each object file format reader,
+   to register information about each format the the reader is prepared
+   to handle. */
+
+void
+add_symtab_fns (sf)
+     struct sym_fns *sf;
+{
+  sf->next = symtab_fns;
+  symtab_fns = sf;
+}
+
+
+/* Initialize to read symbols from the symbol file sym_bfd.  It either
+   returns or calls error().  The result is an initialized struct sym_fns
+   in the objfile structure, that contains cached information about the
+   symbol file.  */
+
+static void
+find_sym_fns (objfile)
+     struct objfile *objfile;
+{
+  struct sym_fns *sf;
+  enum bfd_flavour our_flavour = bfd_get_flavour (objfile -> obfd);
+  char *our_target = bfd_get_target (objfile -> obfd);
+
+  /* Special kludge for RS/6000 and PowerMac.  See xcoffread.c.  */
+  if (STREQ (our_target, "aixcoff-rs6000") ||
+      STREQ (our_target, "xcoff-powermac"))
+    our_flavour = (enum bfd_flavour)-1;
+
+  /* Special kludge for apollo.  See dstread.c.  */
+  if (STREQN (our_target, "apollo", 6))
+    our_flavour = (enum bfd_flavour)-2;
+
+  for (sf = symtab_fns; sf != NULL; sf = sf -> next)
+    {
+      if (our_flavour == sf -> sym_flavour)
+	{
+	  objfile -> sf = sf;
+	  return;
+	}
+    }
+  error ("I'm sorry, Dave, I can't do that.  Symbol format `%s' unknown.",
+	 bfd_get_target (objfile -> obfd));
+}
+
+/* This function runs the load command of our current target.  */
+
+static void
+load_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  if (arg == NULL)
+    arg = get_exec_file (1);
+  target_load (arg, from_tty);
+}
+
+/* This version of "load" should be usable for any target.  Currently
+   it is just used for remote targets, not inftarg.c or core files,
+   on the theory that only in that case is it useful.
+
+   Avoiding xmodem and the like seems like a win (a) because we don't have
+   to worry about finding it, and (b) On VMS, fork() is very slow and so
+   we don't want to run a subprocess.  On the other hand, I'm not sure how
+   performance compares.  */
+#define GENERIC_LOAD_CHUNK 256
+#define VALIDATE_DOWNLOAD 0
+void
+generic_load (filename, from_tty)
+    char *filename;
+    int from_tty;
+{
+  struct cleanup *old_cleanups;
+  asection *s;
+  bfd *loadfile_bfd;
+  time_t start_time, end_time;	/* Start and end times of download */
+  unsigned long data_count = 0;	/* Number of bytes transferred to memory */
+  int n; 
+  unsigned long load_offset = 0; 	/* offset to add to vma for each section */
+  char buf[GENERIC_LOAD_CHUNK+8];
+#if VALIDATE_DOWNLOAD  
+  char verify_buffer[GENERIC_LOAD_CHUNK+8] ;
+#endif  
+
+  /* enable user to specify address for downloading as 2nd arg to load */
+  n = sscanf(filename, "%s 0x%lx", buf, &load_offset);
+  if (n > 1 ) 
+    filename = buf;
+  else
+    load_offset = 0;
+
+  loadfile_bfd = bfd_openr (filename, gnutarget);
+  if (loadfile_bfd == NULL)
+    {
+      perror_with_name (filename);
+      return;
+    }
+  /* FIXME: should be checking for errors from bfd_close (for one thing,
+     on error it does not free all the storage associated with the
+     bfd).  */
+  old_cleanups = make_cleanup ((make_cleanup_func) bfd_close, loadfile_bfd);
+
+  if (!bfd_check_format (loadfile_bfd, bfd_object)) 
+    {
+      error ("\"%s\" is not an object file: %s", filename,
+	     bfd_errmsg (bfd_get_error ()));
+    }
+  
+  start_time = time (NULL);
+
+  for (s = loadfile_bfd->sections; s; s = s->next) 
+    {
+      if (s->flags & SEC_LOAD) 
+        {
+          bfd_size_type size;
+
+          size = bfd_get_section_size_before_reloc (s);
+          if (size > 0)
+            {
+              char *buffer;
+              struct cleanup *old_chain;
+              bfd_vma lma;
+              unsigned long l = size ;
+              int err;
+              char *sect;
+              unsigned long sent;
+              unsigned long len;
+	      
+	      l = l > GENERIC_LOAD_CHUNK ? GENERIC_LOAD_CHUNK : l ;
+
+              buffer = xmalloc (size);
+              old_chain = make_cleanup (free, buffer);
+
+              lma = s->lma;
+              lma += load_offset;
+
+              /* Is this really necessary?  I guess it gives the user something
+                 to look at during a long download.  */
+              printf_filtered ("Loading section %s, size 0x%lx lma ",
+                               bfd_get_section_name (loadfile_bfd, s),
+                               (unsigned long) size);
+              print_address_numeric (lma, 1, gdb_stdout);
+              printf_filtered ("\n");
+
+              bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
+
+              sect = (char *) bfd_get_section_name (loadfile_bfd, s);
+              sent = 0;
+              do
+                {            
+                  len = (size - sent) < l ? (size - sent) : l;
+                  sent += len;
+                  err = target_write_memory (lma, buffer, len);
+                  if (ui_load_progress_hook)
+                    if (ui_load_progress_hook (sect, sent))
+		      error ("Canceled the download");
+#if VALIDATE_DOWNLOAD
+		  /* Broken memories and broken monitors manifest themselves
+		     here when bring new computers to life.
+		     This doubles already slow downloads.
+		  */
+		  if (err) break ;
+		  {
+		    target_read_memory(lma,verify_buffer,len) ;
+		    if (0 != bcmp(buffer,verify_buffer,len))
+		      error("Download verify failed at %08x",
+			    (unsigned long)lma) ;
+		  }
+
+#endif
+		  data_count += len ;
+                  lma  += len;
+                  buffer += len;
+                } /* od */
+              while (err == 0 && sent < size);
+
+              if (err != 0)
+                error ("Memory access error while loading section %s.", 
+                       bfd_get_section_name (loadfile_bfd, s));
+                
+              do_cleanups (old_chain);
+            }
+        }
+    }
+
+  end_time = time (NULL);
+  {
+    unsigned long entry ;
+    entry = bfd_get_start_address(loadfile_bfd) ;
+    printf_filtered ("Start address 0x%lx , load size %d\n", entry,data_count);
+    /* We were doing this in remote-mips.c, I suspect it is right
+       for other targets too.  */
+    write_pc (entry);
+  }
+
+  /* FIXME: are we supposed to call symbol_file_add or not?  According to
+     a comment from remote-mips.c (where a call to symbol_file_add was
+     commented out), making the call confuses GDB if more than one file is
+     loaded in.  remote-nindy.c had no call to symbol_file_add, but remote-vx.c
+     does.  */
+
+  report_transfer_performance (data_count, start_time, end_time);
+
+  do_cleanups (old_cleanups);
+}
+
+/* Report how fast the transfer went. */
+
+void
+report_transfer_performance (data_count, start_time, end_time)
+unsigned long data_count;
+time_t start_time, end_time;
+{
+  printf_filtered ("Transfer rate: ");
+  if (end_time != start_time)
+    printf_filtered ("%d bits/sec",
+		     (data_count * 8) / (end_time - start_time));
+  else
+    printf_filtered ("%d bits in <1 sec", (data_count * 8));
+  printf_filtered (".\n");
+}
+
+/* This function allows the addition of incrementally linked object files.
+   It does not modify any state in the target, only in the debugger.  */
+
+/* ARGSUSED */
+static void
+add_symbol_file_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char *name = NULL;
+  CORE_ADDR text_addr;
+  char *arg;
+  int readnow = 0;
+  int mapped = 0;
+  
+  dont_repeat ();
+
+  if (args == NULL)
+    {
+      error ("add-symbol-file takes a file name and an address");
+    }
+
+  /* Make a copy of the string that we can safely write into. */
+
+  args = strdup (args);
+  make_cleanup (free, args);
+
+  /* Pick off any -option args and the file name. */
+
+  while ((*args != '\000') && (name == NULL))
+    {
+      while (isspace (*args)) {args++;}
+      arg = args;
+      while ((*args != '\000') && !isspace (*args)) {args++;}
+      if (*args != '\000')
+	{
+	  *args++ = '\000';
+	}
+      if (*arg != '-')
+	{
+	  name = arg;
+	}
+      else if (STREQ (arg, "-mapped"))
+	{
+	  mapped = 1;
+	}
+      else if (STREQ (arg, "-readnow"))
+	{
+	  readnow = 1;
+	}
+      else
+	{
+	  error ("unknown option `%s'", arg);
+	}
+    }
+
+  /* After picking off any options and the file name, args should be
+     left pointing at the remainder of the command line, which should
+     be the address expression to evaluate. */
+
+  if (name == NULL)
+    {
+      error ("add-symbol-file takes a file name");
+    }
+  name = tilde_expand (name);
+  make_cleanup (free, name);
+
+  if (*args != '\000')
+    {
+      text_addr = parse_and_eval_address (args);
+    }
+  else
+    {
+      target_link(name, &text_addr);
+      if (text_addr == (CORE_ADDR)-1)
+	error("Don't know how to get text start location for this file");
+    }
+
+  /* FIXME-32x64: Assumes text_addr fits in a long.  */
+  if ((from_tty)
+      && (!query ("add symbol table from file \"%s\" at text_addr = %s?\n",
+	          name, local_hex_string ((unsigned long)text_addr))))
+    error ("Not confirmed.");
+
+  symbol_file_add (name, from_tty, text_addr, 0, mapped, readnow,
+                   1,  /* user_loaded */
+                   0); /* We'll guess it's ! is_solib */
+
+  /* Getting new symbols may change our opinion about what is
+     frameless.  */
+  reinit_frame_cache ();
+}
+
+static void
+add_shared_symbol_files_command  (args, from_tty)
+     char *args;
+     int from_tty;
+{
+#ifdef ADD_SHARED_SYMBOL_FILES
+  ADD_SHARED_SYMBOL_FILES (args, from_tty);
+#else
+  error ("This command is not available in this configuration of GDB.");
+#endif  
+}
+
+/* Re-read symbols if a symbol-file has changed.  */
+void
+reread_symbols ()
+{
+  struct objfile *objfile;
+  long new_modtime;
+  int reread_one = 0;
+  struct stat new_statbuf;
+  int res;
+
+  /* With the addition of shared libraries, this should be modified,
+     the load time should be saved in the partial symbol tables, since
+     different tables may come from different source files.  FIXME.
+     This routine should then walk down each partial symbol table
+     and see if the symbol table that it originates from has been changed */
+
+  for (objfile = object_files; objfile; objfile = objfile->next) {
+    if (objfile->obfd) {
+#ifdef IBM6000_TARGET
+     /* If this object is from a shared library, then you should
+        stat on the library name, not member name. */
+
+     if (objfile->obfd->my_archive)
+       res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
+     else
+#endif
+      res = stat (objfile->name, &new_statbuf);
+      if (res != 0) {
+	/* FIXME, should use print_sys_errmsg but it's not filtered. */
+	printf_filtered ("`%s' has disappeared; keeping its symbols.\n",
+			 objfile->name);
+	continue;
+      }
+      new_modtime = new_statbuf.st_mtime;
+      if (new_modtime != objfile->mtime)
+	{
+	  struct cleanup *old_cleanups;
+	  struct section_offsets *offsets;
+	  int num_offsets;
+	  int section_offsets_size;
+	  char *obfd_filename;
+
+	  printf_filtered ("`%s' has changed; re-reading symbols.\n",
+			   objfile->name);
+
+	  /* There are various functions like symbol_file_add,
+	     symfile_bfd_open, syms_from_objfile, etc., which might
+	     appear to do what we want.  But they have various other
+	     effects which we *don't* want.  So we just do stuff
+	     ourselves.  We don't worry about mapped files (for one thing,
+	     any mapped file will be out of date).  */
+
+	  /* If we get an error, blow away this objfile (not sure if
+	     that is the correct response for things like shared
+	     libraries).  */
+	  old_cleanups = make_cleanup ((make_cleanup_func) free_objfile, 
+                                       objfile);
+	  /* We need to do this whenever any symbols go away.  */
+	  make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+	  /* Clean up any state BFD has sitting around.  We don't need
+	     to close the descriptor but BFD lacks a way of closing the
+	     BFD without closing the descriptor.  */
+	  obfd_filename = bfd_get_filename (objfile->obfd);
+	  if (!bfd_close (objfile->obfd))
+	    error ("Can't close BFD for %s: %s", objfile->name,
+		   bfd_errmsg (bfd_get_error ()));
+	  objfile->obfd = bfd_openr (obfd_filename, gnutarget);
+	  if (objfile->obfd == NULL)
+	    error ("Can't open %s to read symbols.", objfile->name);
+	  /* bfd_openr sets cacheable to true, which is what we want.  */
+	  if (!bfd_check_format (objfile->obfd, bfd_object))
+	    error ("Can't read symbols from %s: %s.", objfile->name,
+		   bfd_errmsg (bfd_get_error ()));
+
+	  /* Save the offsets, we will nuke them with the rest of the
+	     psymbol_obstack.  */
+	  num_offsets = objfile->num_sections;
+	  section_offsets_size =
+	    sizeof (struct section_offsets)
+	      + sizeof (objfile->section_offsets->offsets) * num_offsets;
+	  offsets = (struct section_offsets *) alloca (section_offsets_size);
+	  memcpy (offsets, objfile->section_offsets, section_offsets_size);
+
+	  /* Nuke all the state that we will re-read.  Much of the following
+	     code which sets things to NULL really is necessary to tell
+	     other parts of GDB that there is nothing currently there.  */
+
+	  /* FIXME: Do we have to free a whole linked list, or is this
+	     enough?  */
+	  if (objfile->global_psymbols.list)
+	    mfree (objfile->md, objfile->global_psymbols.list);
+	  memset (&objfile -> global_psymbols, 0,
+		  sizeof (objfile -> global_psymbols));
+	  if (objfile->static_psymbols.list)
+	    mfree (objfile->md, objfile->static_psymbols.list);
+	  memset (&objfile -> static_psymbols, 0,
+		  sizeof (objfile -> static_psymbols));
+
+	  /* Free the obstacks for non-reusable objfiles */
+	  obstack_free (&objfile -> psymbol_cache.cache, 0);
+	  memset (&objfile -> psymbol_cache, 0,
+		  sizeof (objfile -> psymbol_cache));
+	  obstack_free (&objfile -> psymbol_obstack, 0);
+	  obstack_free (&objfile -> symbol_obstack, 0);
+	  obstack_free (&objfile -> type_obstack, 0);
+	  objfile->sections = NULL;
+	  objfile->symtabs = NULL;
+	  objfile->psymtabs = NULL;
+	  objfile->free_psymtabs = NULL;
+	  objfile->msymbols = NULL;
+	  objfile->minimal_symbol_count= 0;
+	  objfile->fundamental_types = NULL;
+	  if (objfile -> sf != NULL)
+	    {
+	      (*objfile -> sf -> sym_finish) (objfile);
+	    }
+
+	  /* We never make this a mapped file.  */
+	  objfile -> md = NULL;
+	  /* obstack_specify_allocation also initializes the obstack so
+	     it is empty.  */
+	  obstack_specify_allocation (&objfile -> psymbol_cache.cache, 0, 0,
+				      xmalloc, free);
+	  obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0,
+				      xmalloc, free);
+	  obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0,
+				      xmalloc, free);
+	  obstack_specify_allocation (&objfile -> type_obstack, 0, 0,
+				      xmalloc, free);
+	  if (build_objfile_section_table (objfile))
+	    {
+	      error ("Can't find the file sections in `%s': %s", 
+		     objfile -> name, bfd_errmsg (bfd_get_error ()));
+	    }
+
+	  /* We use the same section offsets as from last time.  I'm not
+	     sure whether that is always correct for shared libraries.  */
+	  objfile->section_offsets = (struct section_offsets *)
+	    obstack_alloc (&objfile -> psymbol_obstack, section_offsets_size);
+	  memcpy (objfile->section_offsets, offsets, section_offsets_size);
+	  objfile->num_sections = num_offsets;
+
+	  /* What the hell is sym_new_init for, anyway?  The concept of
+	     distinguishing between the main file and additional files
+	     in this way seems rather dubious.  */
+	  if (objfile == symfile_objfile)
+            {
+              (*objfile->sf->sym_new_init) (objfile);
+#ifdef HPUXHPPA
+              RESET_HP_UX_GLOBALS ();
+#endif
+            }
+
+	  (*objfile->sf->sym_init) (objfile);
+	  clear_complaints (1, 1);
+	  /* The "mainline" parameter is a hideous hack; I think leaving it
+	     zero is OK since dbxread.c also does what it needs to do if
+	     objfile->global_psymbols.size is 0.  */
+	  (*objfile->sf->sym_read) (objfile, objfile->section_offsets, 0);
+	  if (!have_partial_symbols () && !have_full_symbols ())
+	    {
+	      wrap_here ("");
+	      printf_filtered ("(no debugging symbols found)\n");
+	      wrap_here ("");
+	    }
+	  objfile -> flags |= OBJF_SYMS;
+
+	  /* We're done reading the symbol file; finish off complaints.  */
+	  clear_complaints (0, 1);
+
+	  /* Getting new symbols may change our opinion about what is
+	     frameless.  */
+
+	  reinit_frame_cache ();
+
+	  /* Discard cleanups as symbol reading was successful.  */
+	  discard_cleanups (old_cleanups);
+
+	  /* If the mtime has changed between the time we set new_modtime
+	     and now, we *want* this to be out of date, so don't call stat
+	     again now.  */
+	  objfile->mtime = new_modtime;
+	  reread_one = 1;
+
+	  /* Call this after reading in a new symbol table to give target
+	     dependant code a crack at the new symbols.  For instance, this
+	     could be used to update the values of target-specific symbols GDB
+	     needs to keep track of (such as _sigtramp, or whatever).  */
+
+	  TARGET_SYMFILE_POSTREAD (objfile);
+	}
+    }
+  }
+
+  if (reread_one)
+    clear_symtab_users ();
+}
+
+
+
+typedef struct {
+  char         *ext;
+  enum language lang;
+} filename_language;
+
+static filename_language * filename_language_table;
+static int fl_table_size, fl_table_next;
+
+static void
+add_filename_language (ext, lang)
+     char         *ext;
+     enum language lang;
+{
+  if (fl_table_next >= fl_table_size)
+    {
+      fl_table_size += 10;
+      filename_language_table = realloc (filename_language_table, 
+					 fl_table_size);
+    }
+
+  filename_language_table[fl_table_next].ext  = strsave (ext);
+  filename_language_table[fl_table_next].lang = lang;
+  fl_table_next++;
+}
+
+static char *ext_args;
+
+static void
+set_ext_lang_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int i;
+  char *cp = ext_args;
+  enum language lang;
+
+  /* First arg is filename extension, starting with '.' */
+  if (*cp != '.')
+    error ("'%s': Filename extension must begin with '.'", ext_args);
+
+  /* Find end of first arg.  */
+  while (*cp && !isspace (*cp))	
+    cp++;
+
+  if (*cp == '\0')
+    error ("'%s': two arguments required -- filename extension and language",
+	   ext_args);
+
+  /* Null-terminate first arg */
+  *cp++ = '\0'; 
+
+  /* Find beginning of second arg, which should be a source language.  */
+  while (*cp && isspace (*cp))
+    cp++;
+
+  if (*cp == '\0')
+    error ("'%s': two arguments required -- filename extension and language",
+	   ext_args);
+
+  /* Lookup the language from among those we know.  */
+  lang = language_enum (cp);
+
+  /* Now lookup the filename extension: do we already know it?  */
+  for (i = 0; i < fl_table_next; i++)
+    if (0 == strcmp (ext_args, filename_language_table[i].ext))
+      break;
+
+  if (i >= fl_table_next)
+    {
+      /* new file extension */
+      add_filename_language (ext_args, lang);
+    }
+  else
+    {
+      /* redefining a previously known filename extension */
+
+      /* if (from_tty) */
+      /*   query ("Really make files of type %s '%s'?", */
+      /*          ext_args, language_str (lang));           */
+
+      free (filename_language_table[i].ext);
+      filename_language_table[i].ext  = strsave (ext_args);
+      filename_language_table[i].lang = lang;
+    }
+}
+
+static void
+info_ext_lang_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  int i;
+
+  printf_filtered ("Filename extensions and the languages they represent:");
+  printf_filtered ("\n\n");
+  for (i = 0; i < fl_table_next; i++)
+    printf_filtered ("\t%s\t- %s\n", 
+		     filename_language_table[i].ext, 
+		     language_str (filename_language_table[i].lang));
+}
+
+static void
+init_filename_language_table ()
+{
+  if (fl_table_size == 0)	/* protect against repetition */
+    {
+      fl_table_size = 20;
+      fl_table_next = 0;
+      filename_language_table = 
+	xmalloc (fl_table_size * sizeof (*filename_language_table));
+      add_filename_language (".c",     language_c);
+      add_filename_language (".C",     language_cplus);
+      add_filename_language (".cc",    language_cplus);
+      add_filename_language (".cp",    language_cplus);
+      add_filename_language (".cpp",   language_cplus);
+      add_filename_language (".cxx",   language_cplus);
+      add_filename_language (".c++",   language_cplus);
+      add_filename_language (".java",  language_java);
+      add_filename_language (".class", language_java);
+      add_filename_language (".ch",    language_chill);
+      add_filename_language (".c186",  language_chill);
+      add_filename_language (".c286",  language_chill);
+      add_filename_language (".f",     language_fortran);
+      add_filename_language (".F",     language_fortran);
+      add_filename_language (".s",     language_asm);
+      add_filename_language (".S",     language_asm);
+    }
+}
+
+enum language
+deduce_language_from_filename (filename)
+     char *filename;
+{
+  int i;
+  char *cp;
+
+  if (filename != NULL)
+    if ((cp = strrchr (filename, '.')) != NULL)
+      for (i = 0; i < fl_table_next; i++)
+	if (strcmp (cp, filename_language_table[i].ext) == 0)
+	  return filename_language_table[i].lang;
+
+  return language_unknown;
+}
+
+/* allocate_symtab:
+
+   Allocate and partly initialize a new symbol table.  Return a pointer
+   to it.  error() if no space.
+
+   Caller must set these fields:
+	LINETABLE(symtab)
+	symtab->blockvector
+	symtab->dirname
+	symtab->free_code
+	symtab->free_ptr
+	possibly free_named_symtabs (symtab->filename);
+ */
+
+struct symtab *
+allocate_symtab (filename, objfile)
+     char *filename;
+     struct objfile *objfile;
+{
+  register struct symtab *symtab;
+
+  symtab = (struct symtab *)
+    obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symtab));
+  memset (symtab, 0, sizeof (*symtab));
+  symtab -> filename = obsavestring (filename, strlen (filename),
+				     &objfile -> symbol_obstack);
+  symtab -> fullname = NULL;
+  symtab -> language = deduce_language_from_filename (filename);
+  symtab -> debugformat = obsavestring ("unknown", 7,
+					&objfile -> symbol_obstack);
+
+  /* Hook it to the objfile it comes from */
+
+  symtab -> objfile = objfile;
+  symtab -> next = objfile -> symtabs;
+  objfile -> symtabs = symtab;
+
+  /* FIXME: This should go away.  It is only defined for the Z8000,
+     and the Z8000 definition of this macro doesn't have anything to
+     do with the now-nonexistent EXTRA_SYMTAB_INFO macro, it's just
+     here for convenience.  */
+#ifdef INIT_EXTRA_SYMTAB_INFO
+  INIT_EXTRA_SYMTAB_INFO (symtab);
+#endif
+
+  return (symtab);
+}
+
+struct partial_symtab *
+allocate_psymtab (filename, objfile)
+     char *filename;
+     struct objfile *objfile;
+{
+  struct partial_symtab *psymtab;
+
+  if (objfile -> free_psymtabs)
+    {
+      psymtab = objfile -> free_psymtabs;
+      objfile -> free_psymtabs = psymtab -> next;
+    }
+  else
+    psymtab = (struct partial_symtab *)
+      obstack_alloc (&objfile -> psymbol_obstack,
+		     sizeof (struct partial_symtab));
+
+  memset (psymtab, 0, sizeof (struct partial_symtab));
+  psymtab -> filename = obsavestring (filename, strlen (filename),
+				      &objfile -> psymbol_obstack);
+  psymtab -> symtab = NULL;
+
+  /* Prepend it to the psymtab list for the objfile it belongs to.
+     Psymtabs are searched in most recent inserted -> least recent
+     inserted order. */
+
+  psymtab -> objfile = objfile;
+  psymtab -> next = objfile -> psymtabs;
+  objfile -> psymtabs = psymtab;
+#if 0
+  {
+    struct partial_symtab **prev_pst;
+    psymtab -> objfile = objfile;
+    psymtab -> next = NULL;
+    prev_pst = &(objfile -> psymtabs);
+    while ((*prev_pst) != NULL)
+      prev_pst = &((*prev_pst) -> next);
+    (*prev_pst) = psymtab;
+  }  
+#endif
+  
+  return (psymtab);
+}
+
+void
+discard_psymtab (pst)
+     struct partial_symtab *pst;
+{
+  struct partial_symtab **prev_pst;
+
+  /* From dbxread.c:
+     Empty psymtabs happen as a result of header files which don't
+     have any symbols in them.  There can be a lot of them.  But this
+     check is wrong, in that a psymtab with N_SLINE entries but
+     nothing else is not empty, but we don't realize that.  Fixing
+     that without slowing things down might be tricky.  */
+
+  /* First, snip it out of the psymtab chain */
+
+  prev_pst = &(pst->objfile->psymtabs);
+  while ((*prev_pst) != pst)
+    prev_pst = &((*prev_pst)->next);
+  (*prev_pst) = pst->next;
+
+  /* Next, put it on a free list for recycling */
+
+  pst->next = pst->objfile->free_psymtabs;
+  pst->objfile->free_psymtabs = pst;
+}
+
+
+/* Reset all data structures in gdb which may contain references to symbol
+   table data.  */
+
+void
+clear_symtab_users ()
+{
+  /* Someday, we should do better than this, by only blowing away
+     the things that really need to be blown.  */
+  clear_value_history ();
+  clear_displays ();
+  clear_internalvars ();
+  breakpoint_re_set ();
+  set_default_breakpoint (0, 0, 0, 0);
+  current_source_symtab = 0;
+  current_source_line = 0;
+  clear_pc_function_cache ();
+  target_new_objfile (NULL);
+}
+
+/* clear_symtab_users_once:
+
+   This function is run after symbol reading, or from a cleanup.
+   If an old symbol table was obsoleted, the old symbol table
+   has been blown away, but the other GDB data structures that may 
+   reference it have not yet been cleared or re-directed.  (The old
+   symtab was zapped, and the cleanup queued, in free_named_symtab()
+   below.)
+
+   This function can be queued N times as a cleanup, or called
+   directly; it will do all the work the first time, and then will be a
+   no-op until the next time it is queued.  This works by bumping a
+   counter at queueing time.  Much later when the cleanup is run, or at
+   the end of symbol processing (in case the cleanup is discarded), if
+   the queued count is greater than the "done-count", we do the work
+   and set the done-count to the queued count.  If the queued count is
+   less than or equal to the done-count, we just ignore the call.  This
+   is needed because reading a single .o file will often replace many
+   symtabs (one per .h file, for example), and we don't want to reset
+   the breakpoints N times in the user's face.
+
+   The reason we both queue a cleanup, and call it directly after symbol
+   reading, is because the cleanup protects us in case of errors, but is
+   discarded if symbol reading is successful.  */
+
+#if 0
+/* FIXME:  As free_named_symtabs is currently a big noop this function
+   is no longer needed.  */
+static void
+clear_symtab_users_once PARAMS ((void));
+
+static int clear_symtab_users_queued;
+static int clear_symtab_users_done;
+
+static void
+clear_symtab_users_once ()
+{
+  /* Enforce once-per-`do_cleanups'-semantics */
+  if (clear_symtab_users_queued <= clear_symtab_users_done)
+    return;
+  clear_symtab_users_done = clear_symtab_users_queued;
+
+  clear_symtab_users ();
+}
+#endif
+
+/* Delete the specified psymtab, and any others that reference it.  */
+
+static void
+cashier_psymtab (pst)
+     struct partial_symtab *pst;
+{
+  struct partial_symtab *ps, *pprev = NULL;
+  int i;
+
+  /* Find its previous psymtab in the chain */
+  for (ps = pst->objfile->psymtabs; ps; ps = ps->next) {
+    if (ps == pst)
+      break;
+    pprev = ps;
+  }
+
+  if (ps) {
+    /* Unhook it from the chain.  */
+    if (ps == pst->objfile->psymtabs)
+      pst->objfile->psymtabs = ps->next;
+    else
+      pprev->next = ps->next;
+
+    /* FIXME, we can't conveniently deallocate the entries in the
+       partial_symbol lists (global_psymbols/static_psymbols) that
+       this psymtab points to.  These just take up space until all
+       the psymtabs are reclaimed.  Ditto the dependencies list and
+       filename, which are all in the psymbol_obstack.  */
+
+    /* We need to cashier any psymtab that has this one as a dependency... */
+again:
+    for (ps = pst->objfile->psymtabs; ps; ps = ps->next) {
+      for (i = 0; i < ps->number_of_dependencies; i++) {
+	if (ps->dependencies[i] == pst) {
+	  cashier_psymtab (ps);
+	  goto again;		/* Must restart, chain has been munged. */
+	}
+      }
+    }
+  }
+}
+
+/* If a symtab or psymtab for filename NAME is found, free it along
+   with any dependent breakpoints, displays, etc.
+   Used when loading new versions of object modules with the "add-file"
+   command.  This is only called on the top-level symtab or psymtab's name;
+   it is not called for subsidiary files such as .h files.
+
+   Return value is 1 if we blew away the environment, 0 if not.
+   FIXME.  The return valu appears to never be used.
+
+   FIXME.  I think this is not the best way to do this.  We should
+   work on being gentler to the environment while still cleaning up
+   all stray pointers into the freed symtab.  */
+
+int
+free_named_symtabs (name)
+     char *name;
+{
+#if 0
+  /* FIXME:  With the new method of each objfile having it's own
+     psymtab list, this function needs serious rethinking.  In particular,
+     why was it ever necessary to toss psymtabs with specific compilation
+     unit filenames, as opposed to all psymtabs from a particular symbol
+     file?  -- fnf
+     Well, the answer is that some systems permit reloading of particular
+     compilation units.  We want to blow away any old info about these
+     compilation units, regardless of which objfiles they arrived in. --gnu.  */
+
+  register struct symtab *s;
+  register struct symtab *prev;
+  register struct partial_symtab *ps;
+  struct blockvector *bv;
+  int blewit = 0;
+
+  /* We only wack things if the symbol-reload switch is set.  */
+  if (!symbol_reloading)
+    return 0;
+
+  /* Some symbol formats have trouble providing file names... */
+  if (name == 0 || *name == '\0')
+    return 0;
+
+  /* Look for a psymtab with the specified name.  */
+
+again2:
+  for (ps = partial_symtab_list; ps; ps = ps->next) {
+    if (STREQ (name, ps->filename)) {
+      cashier_psymtab (ps);	/* Blow it away...and its little dog, too.  */
+      goto again2;		/* Must restart, chain has been munged */
+    }
+  }
+
+  /* Look for a symtab with the specified name.  */
+
+  for (s = symtab_list; s; s = s->next)
+    {
+      if (STREQ (name, s->filename))
+	break;
+      prev = s;
+    }
+
+  if (s)
+    {
+      if (s == symtab_list)
+	symtab_list = s->next;
+      else
+	prev->next = s->next;
+
+      /* For now, queue a delete for all breakpoints, displays, etc., whether
+	 or not they depend on the symtab being freed.  This should be
+	 changed so that only those data structures affected are deleted.  */
+
+      /* But don't delete anything if the symtab is empty.
+	 This test is necessary due to a bug in "dbxread.c" that
+	 causes empty symtabs to be created for N_SO symbols that
+	 contain the pathname of the object file.  (This problem
+	 has been fixed in GDB 3.9x).  */
+
+      bv = BLOCKVECTOR (s);
+      if (BLOCKVECTOR_NBLOCKS (bv) > 2
+	  || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
+	  || BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
+	{
+	  complain (&oldsyms_complaint, name);
+
+	  clear_symtab_users_queued++;
+	  make_cleanup (clear_symtab_users_once, 0);
+	  blewit = 1;
+	} else {
+	  complain (&empty_symtab_complaint, name);
+	}
+
+      free_symtab (s);
+    }
+  else
+    {
+      /* It is still possible that some breakpoints will be affected
+	 even though no symtab was found, since the file might have
+	 been compiled without debugging, and hence not be associated
+	 with a symtab.  In order to handle this correctly, we would need
+	 to keep a list of text address ranges for undebuggable files.
+	 For now, we do nothing, since this is a fairly obscure case.  */
+      ;
+    }
+
+  /* FIXME, what about the minimal symbol table? */
+  return blewit;
+#else
+  return (0);
+#endif
+}
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+
+struct partial_symtab *
+start_psymtab_common (objfile, section_offsets,
+		      filename, textlow, global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     CORE_ADDR textlow;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  struct partial_symtab *psymtab;
+
+  psymtab = allocate_psymtab (filename, objfile);
+  psymtab -> section_offsets = section_offsets;
+  psymtab -> textlow = textlow;
+  psymtab -> texthigh = psymtab -> textlow;  /* default */
+  psymtab -> globals_offset = global_syms - objfile -> global_psymbols.list;
+  psymtab -> statics_offset = static_syms - objfile -> static_psymbols.list;
+  return (psymtab);
+}
+
+/* Add a symbol with a long value to a psymtab.
+   Since one arg is a struct, we pass in a ptr and deref it (sigh).  */
+
+void
+add_psymbol_to_list (name, namelength, namespace, class, list, val, coreaddr,
+		     language, objfile)
+     char *name;
+     int namelength;
+     namespace_enum namespace;
+     enum address_class class;
+     struct psymbol_allocation_list *list;
+     long val;					/* Value as a long */
+     CORE_ADDR coreaddr;			/* Value as a CORE_ADDR */
+     enum language language;
+     struct objfile *objfile;
+{
+  register struct partial_symbol *psym;
+  char *buf = alloca (namelength + 1);
+  /* psymbol is static so that there will be no uninitialized gaps in the
+     structure which might contain random data, causing cache misses in
+     bcache. */
+  static struct partial_symbol psymbol;
+
+  /* Create local copy of the partial symbol */
+  memcpy (buf, name, namelength);
+  buf[namelength] = '\0';
+  SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+  /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+  if (val != 0)
+    {
+      SYMBOL_VALUE (&psymbol) = val;
+    }
+  else
+    {
+      SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+    }
+  SYMBOL_SECTION (&psymbol) = 0;
+  SYMBOL_LANGUAGE (&psymbol) = language;
+  PSYMBOL_NAMESPACE (&psymbol) = namespace;
+  PSYMBOL_CLASS (&psymbol) = class;
+  SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+  /* Stash the partial symbol away in the cache */
+  psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+  /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+  if (list->next >= list->list + list->size)
+    {
+      extend_psymbol_list (list, objfile);
+    }
+  *list->next++ = psym;
+  OBJSTAT (objfile, n_psyms++);
+}
+
+/* Add a symbol with a long value to a psymtab. This differs from
+ * add_psymbol_to_list above in taking both a mangled and a demangled
+ * name. */
+
+void
+add_psymbol_with_dem_name_to_list (name, namelength, dem_name, dem_namelength,
+                                   namespace, class, list, val, coreaddr, language, objfile)
+     char *name;
+     int namelength;
+     char *dem_name;
+     int dem_namelength;
+     namespace_enum namespace;
+     enum address_class class;
+     struct psymbol_allocation_list *list;
+     long val;					/* Value as a long */
+     CORE_ADDR coreaddr;			/* Value as a CORE_ADDR */
+     enum language language;
+     struct objfile *objfile;
+{
+  register struct partial_symbol *psym;
+  char *buf = alloca (namelength + 1);
+  /* psymbol is static so that there will be no uninitialized gaps in the
+     structure which might contain random data, causing cache misses in
+     bcache. */
+  static struct partial_symbol psymbol;
+
+  /* Create local copy of the partial symbol */
+
+  memcpy (buf, name, namelength);
+  buf[namelength] = '\0';
+  SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+
+  buf = alloca (dem_namelength + 1);
+  memcpy (buf, dem_name, dem_namelength);
+  buf[dem_namelength] = '\0';
+  
+  switch (language)
+    {
+      case language_c:
+      case language_cplus:
+        SYMBOL_CPLUS_DEMANGLED_NAME (&psymbol) =
+          bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+        break;
+      case language_chill:
+        SYMBOL_CHILL_DEMANGLED_NAME (&psymbol) = 
+          bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+        
+      /* FIXME What should be done for the default case? Ignoring for now. */
+    }
+
+  /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+  if (val != 0)
+    {
+      SYMBOL_VALUE (&psymbol) = val;
+    }
+  else
+    {
+      SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+    }
+  SYMBOL_SECTION (&psymbol) = 0;
+  SYMBOL_LANGUAGE (&psymbol) = language;
+  PSYMBOL_NAMESPACE (&psymbol) = namespace;
+  PSYMBOL_CLASS (&psymbol) = class;
+  SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+  /* Stash the partial symbol away in the cache */
+  psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+  /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+  if (list->next >= list->list + list->size)
+    {
+      extend_psymbol_list (list, objfile);
+    }
+  *list->next++ = psym;
+  OBJSTAT (objfile, n_psyms++);
+}
+
+/* Initialize storage for partial symbols.  */
+
+void
+init_psymbol_list (objfile, total_symbols)
+     struct objfile *objfile;
+     int total_symbols;
+{
+  /* Free any previously allocated psymbol lists.  */
+  
+  if (objfile -> global_psymbols.list)
+    {
+      mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
+    }
+  if (objfile -> static_psymbols.list)
+    {
+      mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
+    }
+  
+  /* Current best guess is that approximately a twentieth
+     of the total symbols (in a debugging file) are global or static
+     oriented symbols */
+  
+  objfile -> global_psymbols.size = total_symbols / 10;
+  objfile -> static_psymbols.size = total_symbols / 10;
+
+  if (objfile -> global_psymbols.size > 0)
+    {
+      objfile -> global_psymbols.next =
+	objfile -> global_psymbols.list = (struct partial_symbol **)
+	xmmalloc (objfile -> md, (objfile -> global_psymbols.size
+				  * sizeof (struct partial_symbol *)));
+    }
+  if (objfile -> static_psymbols.size > 0)
+    {
+      objfile -> static_psymbols.next =
+	objfile -> static_psymbols.list = (struct partial_symbol **)
+	xmmalloc (objfile -> md, (objfile -> static_psymbols.size
+				  * sizeof (struct partial_symbol *)));
+    }
+}
+
+/* OVERLAYS:
+   The following code implements an abstraction for debugging overlay sections.
+
+   The target model is as follows:
+   1) The gnu linker will permit multiple sections to be mapped into the
+      same VMA, each with its own unique LMA (or load address).
+   2) It is assumed that some runtime mechanism exists for mapping the
+      sections, one by one, from the load address into the VMA address.
+   3) This code provides a mechanism for gdb to keep track of which 
+      sections should be considered to be mapped from the VMA to the LMA.
+      This information is used for symbol lookup, and memory read/write.
+      For instance, if a section has been mapped then its contents 
+      should be read from the VMA, otherwise from the LMA.
+
+   Two levels of debugger support for overlays are available.  One is
+   "manual", in which the debugger relies on the user to tell it which
+   overlays are currently mapped.  This level of support is
+   implemented entirely in the core debugger, and the information about
+   whether a section is mapped is kept in the objfile->obj_section table.
+
+   The second level of support is "automatic", and is only available if
+   the target-specific code provides functionality to read the target's
+   overlay mapping table, and translate its contents for the debugger
+   (by updating the mapped state information in the obj_section tables).
+
+   The interface is as follows:
+     User commands:
+       overlay map <name>	-- tell gdb to consider this section mapped
+       overlay unmap <name>	-- tell gdb to consider this section unmapped
+       overlay list		-- list the sections that GDB thinks are mapped
+       overlay read-target	-- get the target's state of what's mapped
+       overlay off/manual/auto -- set overlay debugging state
+     Functional interface:
+       find_pc_mapped_section(pc):    if the pc is in the range of a mapped
+				      section, return that section.
+       find_pc_overlay(pc):	      find any overlay section that contains 
+				      the pc, either in its VMA or its LMA
+       overlay_is_mapped(sect):       true if overlay is marked as mapped
+       section_is_overlay(sect):      true if section's VMA != LMA
+       pc_in_mapped_range(pc,sec):    true if pc belongs to section's VMA
+       pc_in_unmapped_range(...):     true if pc belongs to section's LMA
+       overlay_mapped_address(...):   map an address from section's LMA to VMA
+       overlay_unmapped_address(...): map an address from section's VMA to LMA
+       symbol_overlayed_address(...): Return a "current" address for symbol:
+				      either in VMA or LMA depending on whether
+				      the symbol's section is currently mapped
+ */
+
+/* Overlay debugging state: */
+
+int overlay_debugging = 0;	/* 0 == off, 1 == manual, -1 == auto */
+int overlay_cache_invalid = 0;	/* True if need to refresh mapped state */
+
+/* Target vector for refreshing overlay mapped state */
+static void simple_overlay_update PARAMS ((struct obj_section *));
+void (*target_overlay_update) PARAMS ((struct obj_section *)) 
+     = simple_overlay_update;
+
+/* Function: section_is_overlay (SECTION)
+   Returns true if SECTION has VMA not equal to LMA, ie. 
+   SECTION is loaded at an address different from where it will "run".  */
+
+int
+section_is_overlay (section)
+     asection *section;
+{
+  if (overlay_debugging)
+    if (section && section->lma != 0 &&
+	section->vma != section->lma)
+      return 1;
+
+  return 0;
+}
+
+/* Function: overlay_invalidate_all (void)
+   Invalidate the mapped state of all overlay sections (mark it as stale).  */
+
+static void
+overlay_invalidate_all ()
+{
+  struct objfile     *objfile;
+  struct obj_section *sect;
+
+  ALL_OBJSECTIONS (objfile, sect)
+    if (section_is_overlay (sect->the_bfd_section))
+      sect->ovly_mapped = -1;
+}
+
+/* Function: overlay_is_mapped (SECTION)
+   Returns true if section is an overlay, and is currently mapped. 
+   Private: public access is thru function section_is_mapped.
+
+   Access to the ovly_mapped flag is restricted to this function, so
+   that we can do automatic update.  If the global flag
+   OVERLAY_CACHE_INVALID is set (by wait_for_inferior), then call
+   overlay_invalidate_all.  If the mapped state of the particular
+   section is stale, then call TARGET_OVERLAY_UPDATE to refresh it.  */
+
+static int 
+overlay_is_mapped (osect)
+     struct obj_section *osect;
+{
+  if (osect == 0 || !section_is_overlay (osect->the_bfd_section))
+    return 0;
+
+  switch (overlay_debugging) 
+    {
+    default:
+    case 0:	return 0;	/* overlay debugging off */
+    case -1:			/* overlay debugging automatic */
+      /* Unles there is a target_overlay_update function, 
+	 there's really nothing useful to do here (can't really go auto)  */
+      if (target_overlay_update)
+	{
+	  if (overlay_cache_invalid)
+	    {
+	      overlay_invalidate_all ();
+	      overlay_cache_invalid = 0;
+	    }
+	  if (osect->ovly_mapped == -1)
+	    (*target_overlay_update) (osect);
+	}
+      /* fall thru to manual case */
+    case 1:			/* overlay debugging manual */
+      return osect->ovly_mapped == 1;
+    }
+}
+
+/* Function: section_is_mapped
+   Returns true if section is an overlay, and is currently mapped.  */
+
+int
+section_is_mapped (section)
+     asection *section;
+{
+  struct objfile     *objfile;
+  struct obj_section *osect;
+
+  if (overlay_debugging)
+    if (section && section_is_overlay (section))
+      ALL_OBJSECTIONS (objfile, osect)
+	if (osect->the_bfd_section == section)
+	  return overlay_is_mapped (osect);
+
+  return 0;
+}
+
+/* Function: pc_in_unmapped_range
+   If PC falls into the lma range of SECTION, return true, else false.  */
+
+CORE_ADDR
+pc_in_unmapped_range (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  int size;
+
+  if (overlay_debugging)
+    if (section && section_is_overlay (section))
+      {
+	size = bfd_get_section_size_before_reloc (section);
+	if (section->lma <= pc && pc < section->lma + size)
+	  return 1;
+      }
+  return 0;
+}
+
+/* Function: pc_in_mapped_range
+   If PC falls into the vma range of SECTION, return true, else false.  */
+
+CORE_ADDR
+pc_in_mapped_range (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  int size;
+
+  if (overlay_debugging)
+    if (section && section_is_overlay (section))
+      {
+	size = bfd_get_section_size_before_reloc (section);
+	if (section->vma <= pc && pc < section->vma + size)
+	  return 1;
+      }
+  return 0;
+}
+
+/* Function: overlay_unmapped_address (PC, SECTION)
+   Returns the address corresponding to PC in the unmapped (load) range.
+   May be the same as PC.  */
+
+CORE_ADDR
+overlay_unmapped_address (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  if (overlay_debugging)
+    if (section && section_is_overlay (section) &&
+	pc_in_mapped_range (pc, section))
+      return pc + section->lma - section->vma;
+
+  return pc;
+}
+
+/* Function: overlay_mapped_address (PC, SECTION)
+   Returns the address corresponding to PC in the mapped (runtime) range.
+   May be the same as PC.  */
+
+CORE_ADDR
+overlay_mapped_address (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  if (overlay_debugging)
+    if (section && section_is_overlay (section) &&
+	pc_in_unmapped_range (pc, section))
+      return pc + section->vma - section->lma;
+
+  return pc;
+}
+
+
+/* Function: symbol_overlayed_address 
+   Return one of two addresses (relative to the VMA or to the LMA),
+   depending on whether the section is mapped or not.  */
+
+CORE_ADDR 
+symbol_overlayed_address (address, section)
+     CORE_ADDR address;
+     asection *section;
+{
+  if (overlay_debugging)
+    {
+      /* If the symbol has no section, just return its regular address. */
+      if (section == 0)
+	return address;
+      /* If the symbol's section is not an overlay, just return its address */
+      if (!section_is_overlay (section))
+	return address;
+      /* If the symbol's section is mapped, just return its address */
+      if (section_is_mapped (section))
+	return address;
+      /*
+       * HOWEVER: if the symbol is in an overlay section which is NOT mapped,
+       * then return its LOADED address rather than its vma address!!
+       */
+      return overlay_unmapped_address (address, section);
+    }
+  return address;
+}
+
+/* Function: find_pc_overlay (PC) 
+   Return the best-match overlay section for PC:
+   If PC matches a mapped overlay section's VMA, return that section.
+   Else if PC matches an unmapped section's VMA, return that section.
+   Else if PC matches an unmapped section's LMA, return that section.  */
+
+asection *
+find_pc_overlay (pc)
+     CORE_ADDR pc;
+{
+  struct objfile     *objfile;
+  struct obj_section *osect, *best_match = NULL;
+
+  if (overlay_debugging)
+    ALL_OBJSECTIONS (objfile, osect)
+      if (section_is_overlay (osect->the_bfd_section))
+	{
+	  if (pc_in_mapped_range (pc, osect->the_bfd_section))
+	    {
+	      if (overlay_is_mapped (osect))
+		return osect->the_bfd_section;
+	      else
+		best_match = osect;
+	    }
+	  else if (pc_in_unmapped_range (pc, osect->the_bfd_section))
+	    best_match = osect;
+	}
+  return best_match ? best_match->the_bfd_section : NULL;
+}
+
+/* Function: find_pc_mapped_section (PC)
+   If PC falls into the VMA address range of an overlay section that is 
+   currently marked as MAPPED, return that section.  Else return NULL.  */
+
+asection *
+find_pc_mapped_section (pc)
+     CORE_ADDR pc;
+{
+  struct objfile     *objfile;
+  struct obj_section *osect;
+
+  if (overlay_debugging)
+    ALL_OBJSECTIONS (objfile, osect)
+      if (pc_in_mapped_range (pc, osect->the_bfd_section) &&
+	  overlay_is_mapped (osect))
+	return osect->the_bfd_section;
+
+  return NULL;
+}
+
+/* Function: list_overlays_command
+   Print a list of mapped sections and their PC ranges */
+
+void
+list_overlays_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int                nmapped = 0;
+  struct objfile     *objfile;
+  struct obj_section *osect;
+
+  if (overlay_debugging)
+    ALL_OBJSECTIONS (objfile, osect)
+      if (overlay_is_mapped (osect))
+	{
+	  const char *name;
+	  bfd_vma     lma, vma;
+	  int         size;
+
+	  vma  = bfd_section_vma (objfile->obfd, osect->the_bfd_section);
+	  lma  = bfd_section_lma (objfile->obfd, osect->the_bfd_section);
+	  size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+	  name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
+
+	  printf_filtered ("Section %s, loaded at ", name);
+	  print_address_numeric (lma, 1, gdb_stdout);
+	  puts_filtered (" - ");
+	  print_address_numeric (lma + size, 1, gdb_stdout);
+	  printf_filtered (", mapped at ");
+	  print_address_numeric (vma, 1, gdb_stdout);
+	  puts_filtered (" - ");
+	  print_address_numeric (vma + size, 1, gdb_stdout);
+	  puts_filtered ("\n");
+
+	  nmapped ++;
+	}
+  if (nmapped == 0)
+    printf_filtered ("No sections are mapped.\n");
+}
+
+/* Function: map_overlay_command
+   Mark the named section as mapped (ie. residing at its VMA address).  */
+
+void
+map_overlay_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  struct objfile     *objfile, *objfile2;
+  struct obj_section *sec,     *sec2;
+  asection           *bfdsec;
+
+  if (!overlay_debugging)
+    error ("Overlay debugging not enabled.  Use the 'OVERLAY ON' command.");
+
+  if (args == 0 || *args == 0)
+    error ("Argument required: name of an overlay section");
+
+  /* First, find a section matching the user supplied argument */
+  ALL_OBJSECTIONS (objfile, sec)
+    if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+      { 
+	/* Now, check to see if the section is an overlay. */
+	bfdsec = sec->the_bfd_section;
+	if (!section_is_overlay (bfdsec))
+	  continue;		/* not an overlay section */
+
+	/* Mark the overlay as "mapped" */
+	sec->ovly_mapped = 1;
+
+	/* Next, make a pass and unmap any sections that are
+	   overlapped by this new section: */
+	ALL_OBJSECTIONS (objfile2, sec2)
+	  if (sec2->ovly_mapped &&
+	      sec != sec2 &&
+	      sec->the_bfd_section != sec2->the_bfd_section &&
+	      (pc_in_mapped_range (sec2->addr,    sec->the_bfd_section) ||
+	       pc_in_mapped_range (sec2->endaddr, sec->the_bfd_section)))
+	    {
+	      if (info_verbose)
+		printf_filtered ("Note: section %s unmapped by overlap\n",
+				 bfd_section_name (objfile->obfd, 
+						   sec2->the_bfd_section));
+	      sec2->ovly_mapped = 0;	/* sec2 overlaps sec: unmap sec2 */
+	    }
+	return;
+      }
+  error ("No overlay section called %s", args);
+}
+
+/* Function: unmap_overlay_command
+   Mark the overlay section as unmapped 
+   (ie. resident in its LMA address range, rather than the VMA range).  */
+
+void
+unmap_overlay_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  struct objfile     *objfile;
+  struct obj_section *sec;
+
+  if (!overlay_debugging)
+    error ("Overlay debugging not enabled.  Use the 'OVERLAY ON' command.");
+
+  if (args == 0 || *args == 0)
+    error ("Argument required: name of an overlay section");
+
+  /* First, find a section matching the user supplied argument */
+  ALL_OBJSECTIONS (objfile, sec)
+    if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+      {
+	if (!sec->ovly_mapped)
+	  error ("Section %s is not mapped", args);
+	sec->ovly_mapped = 0;
+	return;
+      }
+  error ("No overlay section called %s", args);
+}
+
+/* Function: overlay_auto_command
+   A utility command to turn on overlay debugging.
+   Possibly this should be done via a set/show command. */
+
+static void
+overlay_auto_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  overlay_debugging = -1;
+  if (info_verbose)
+    printf_filtered ("Automatic overlay debugging enabled.");
+}
+
+/* Function: overlay_manual_command
+   A utility command to turn on overlay debugging.
+   Possibly this should be done via a set/show command. */
+
+static void
+overlay_manual_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  overlay_debugging = 1;
+  if (info_verbose)
+    printf_filtered ("Overlay debugging enabled.");
+}
+
+/* Function: overlay_off_command
+   A utility command to turn on overlay debugging.
+   Possibly this should be done via a set/show command. */
+
+static void
+overlay_off_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  overlay_debugging = 0; 
+  if (info_verbose)
+    printf_filtered ("Overlay debugging disabled.");
+}
+
+static void
+overlay_load_command (args, from_tty)
+     char *args;
+     int   from_tty;
+{
+  if (target_overlay_update)
+    (*target_overlay_update) (NULL);
+  else
+    error ("This target does not know how to read its overlay state.");
+}
+
+/* Function: overlay_command
+   A place-holder for a mis-typed command */
+
+/* Command list chain containing all defined "overlay" subcommands. */
+struct cmd_list_element *overlaylist;
+
+static void
+overlay_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered 
+    ("\"overlay\" must be followed by the name of an overlay command.\n");
+  help_list (overlaylist, "overlay ", -1, gdb_stdout);
+}
+
+
+/* Target Overlays for the "Simplest" overlay manager:
+
+   This is GDB's default target overlay layer.  It works with the 
+   minimal overlay manager supplied as an example by Cygnus.  The 
+   entry point is via a function pointer "target_overlay_update", 
+   so targets that use a different runtime overlay manager can 
+   substitute their own overlay_update function and take over the
+   function pointer.
+
+   The overlay_update function pokes around in the target's data structures
+   to see what overlays are mapped, and updates GDB's overlay mapping with
+   this information.
+
+   In this simple implementation, the target data structures are as follows:
+   	unsigned _novlys;		/# number of overlay sections #/
+	unsigned _ovly_table[_novlys][4] = {
+	  {VMA, SIZE, LMA, MAPPED},	/# one entry per overlay section #/
+	  {..., ...,  ..., ...},
+	}
+	unsigned _novly_regions;	/# number of overlay regions #/
+	unsigned _ovly_region_table[_novly_regions][3] = {
+	  {VMA, SIZE, MAPPED_TO_LMA},	/# one entry per overlay region #/
+	  {..., ...,  ...},
+	}
+   These functions will attempt to update GDB's mappedness state in the
+   symbol section table, based on the target's mappedness state.
+
+   To do this, we keep a cached copy of the target's _ovly_table, and
+   attempt to detect when the cached copy is invalidated.  The main
+   entry point is "simple_overlay_update(SECT), which looks up SECT in
+   the cached table and re-reads only the entry for that section from
+   the target (whenever possible).
+ */
+
+/* Cached, dynamically allocated copies of the target data structures: */
+static unsigned  (*cache_ovly_table)[4] = 0;
+#if 0
+static unsigned  (*cache_ovly_region_table)[3] = 0;
+#endif
+static unsigned  cache_novlys = 0;
+#if 0
+static unsigned  cache_novly_regions = 0;
+#endif
+static CORE_ADDR cache_ovly_table_base = 0;
+#if 0
+static CORE_ADDR cache_ovly_region_table_base = 0;
+#endif
+enum   ovly_index { VMA, SIZE, LMA, MAPPED};
+#define TARGET_LONG_BYTES (TARGET_LONG_BIT / TARGET_CHAR_BIT)
+
+/* Throw away the cached copy of _ovly_table */
+static void
+simple_free_overlay_table ()
+{
+  if (cache_ovly_table)
+    free(cache_ovly_table);
+  cache_novlys     = 0;
+  cache_ovly_table = NULL;
+  cache_ovly_table_base = 0;
+}
+
+#if 0
+/* Throw away the cached copy of _ovly_region_table */
+static void
+simple_free_overlay_region_table ()
+{
+  if (cache_ovly_region_table)
+    free(cache_ovly_region_table);
+  cache_novly_regions     = 0;
+  cache_ovly_region_table = NULL;
+  cache_ovly_region_table_base = 0;
+}
+#endif
+
+/* Read an array of ints from the target into a local buffer.
+   Convert to host order.  int LEN is number of ints  */
+static void
+read_target_long_array (memaddr, myaddr, len)
+     CORE_ADDR     memaddr;
+     unsigned int *myaddr;
+     int           len;
+{
+  char *buf = alloca (len * TARGET_LONG_BYTES);
+  int           i;
+
+  read_memory (memaddr, buf, len * TARGET_LONG_BYTES);
+  for (i = 0; i < len; i++)
+    myaddr[i] = extract_unsigned_integer (TARGET_LONG_BYTES * i + buf, 
+					  TARGET_LONG_BYTES);
+}
+
+/* Find and grab a copy of the target _ovly_table
+   (and _novlys, which is needed for the table's size) */
+static int 
+simple_read_overlay_table ()
+{
+  struct minimal_symbol *msym;
+
+  simple_free_overlay_table ();
+  msym = lookup_minimal_symbol ("_novlys", 0, 0);
+  if (msym != NULL)
+    cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+  else 
+    return 0;	/* failure */
+  cache_ovly_table = (void *) xmalloc (cache_novlys * sizeof(*cache_ovly_table));
+  if (cache_ovly_table != NULL)
+    {
+      msym = lookup_minimal_symbol ("_ovly_table", 0, 0);
+      if (msym != NULL)
+	{
+	  cache_ovly_table_base = SYMBOL_VALUE_ADDRESS (msym);
+	  read_target_long_array (cache_ovly_table_base, 
+				  (int *) cache_ovly_table, 
+				  cache_novlys * 4);
+	}
+      else 
+	return 0;	/* failure */
+    }
+  else 
+    return 0;	/* failure */
+  return 1;	/* SUCCESS */
+}
+
+#if 0
+/* Find and grab a copy of the target _ovly_region_table
+   (and _novly_regions, which is needed for the table's size) */
+static int 
+simple_read_overlay_region_table ()
+{
+  struct minimal_symbol *msym;
+
+  simple_free_overlay_region_table ();
+  msym = lookup_minimal_symbol ("_novly_regions", 0, 0);
+  if (msym != NULL)
+    cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+  else 
+    return 0;	/* failure */
+  cache_ovly_region_table = (void *) xmalloc (cache_novly_regions * 12);
+  if (cache_ovly_region_table != NULL)
+    {
+      msym = lookup_minimal_symbol ("_ovly_region_table", 0, 0);
+      if (msym != NULL)
+	{
+	  cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
+	  read_target_long_array (cache_ovly_region_table_base, 
+				  (int *) cache_ovly_region_table, 
+				  cache_novly_regions * 3);
+	}
+      else 
+	return 0;	/* failure */
+    }
+  else 
+    return 0;	/* failure */
+  return 1;	/* SUCCESS */
+}
+#endif
+
+/* Function: simple_overlay_update_1 
+   A helper function for simple_overlay_update.  Assuming a cached copy
+   of _ovly_table exists, look through it to find an entry whose vma,
+   lma and size match those of OSECT.  Re-read the entry and make sure
+   it still matches OSECT (else the table may no longer be valid).
+   Set OSECT's mapped state to match the entry.  Return: 1 for
+   success, 0 for failure.  */
+
+static int
+simple_overlay_update_1 (osect)
+     struct obj_section *osect;
+{
+  int i, size;
+
+  size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+  for (i = 0; i < cache_novlys; i++)
+    if (cache_ovly_table[i][VMA]  == osect->the_bfd_section->vma &&
+	cache_ovly_table[i][LMA]  == osect->the_bfd_section->lma /* &&
+	cache_ovly_table[i][SIZE] == size */)
+      {
+	read_target_long_array (cache_ovly_table_base + i * TARGET_LONG_BYTES,
+				(int *) cache_ovly_table[i], 4);
+	if (cache_ovly_table[i][VMA]  == osect->the_bfd_section->vma &&
+	    cache_ovly_table[i][LMA]  == osect->the_bfd_section->lma /* &&
+	    cache_ovly_table[i][SIZE] == size */)
+	  {
+	    osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+	    return 1;
+	  }
+	else	/* Warning!  Warning!  Target's ovly table has changed! */
+	  return 0;
+      }
+  return 0;
+}
+
+/* Function: simple_overlay_update
+   If OSECT is NULL, then update all sections' mapped state 
+   (after re-reading the entire target _ovly_table). 
+   If OSECT is non-NULL, then try to find a matching entry in the 
+   cached ovly_table and update only OSECT's mapped state.
+   If a cached entry can't be found or the cache isn't valid, then 
+   re-read the entire cache, and go ahead and update all sections.  */
+
+static void
+simple_overlay_update (osect)
+     struct obj_section *osect;
+{
+  struct objfile        *objfile;
+
+  /* Were we given an osect to look up?  NULL means do all of them. */
+  if (osect)
+    /* Have we got a cached copy of the target's overlay table? */
+    if (cache_ovly_table != NULL)
+      /* Does its cached location match what's currently in the symtab? */
+      if (cache_ovly_table_base == 
+	  SYMBOL_VALUE_ADDRESS (lookup_minimal_symbol ("_ovly_table", 0, 0)))
+	/* Then go ahead and try to look up this single section in the cache */
+	if (simple_overlay_update_1 (osect))
+	  /* Found it!  We're done. */
+	  return;
+
+  /* Cached table no good: need to read the entire table anew.
+     Or else we want all the sections, in which case it's actually
+     more efficient to read the whole table in one block anyway.  */
+
+  if (simple_read_overlay_table () == 0)	/* read failed?  No table? */
+    {
+      warning ("Failed to read the target overlay mapping table.");
+      return;
+    }
+  /* Now may as well update all sections, even if only one was requested. */
+  ALL_OBJSECTIONS (objfile, osect)
+    if (section_is_overlay (osect->the_bfd_section))
+      {
+	int i, size;
+
+	size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+	for (i = 0; i < cache_novlys; i++)
+	  if (cache_ovly_table[i][VMA]  == osect->the_bfd_section->vma &&
+	      cache_ovly_table[i][LMA]  == osect->the_bfd_section->lma /* &&
+	      cache_ovly_table[i][SIZE] == size */)
+	    { /* obj_section matches i'th entry in ovly_table */
+	      osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+	      break;	/* finished with inner for loop: break out */
+	    }
+      }
+}
+
+
+void
+_initialize_symfile ()
+{
+  struct cmd_list_element *c;
+  
+  c = add_cmd ("symbol-file", class_files, symbol_file_command,
+   "Load symbol table from executable file FILE.\n\
+The `file' command can also load symbol tables, as well as setting the file\n\
+to execute.", &cmdlist);
+  c->completer = filename_completer;
+
+  c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
+   "Usage: add-symbol-file FILE ADDR\n\
+Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
+ADDR is the starting address of the file's text.",
+	       &cmdlist);
+  c->completer = filename_completer;
+
+  c = add_cmd ("add-shared-symbol-files", class_files,
+	       add_shared_symbol_files_command,
+   "Load the symbols from shared objects in the dynamic linker's link map.",
+   	       &cmdlist);
+  c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
+		     &cmdlist);
+
+  c = add_cmd ("load", class_files, load_command,
+   "Dynamically load FILE into the running program, and record its symbols\n\
+for access from GDB.", &cmdlist);
+  c->completer = filename_completer;
+
+  add_show_from_set
+    (add_set_cmd ("symbol-reloading", class_support, var_boolean,
+		  (char *)&symbol_reloading,
+	  "Set dynamic symbol table reloading multiple times in one run.",
+		  &setlist),
+     &showlist);
+
+  add_prefix_cmd ("overlay", class_support, overlay_command, 
+		  "Commands for debugging overlays.", &overlaylist, 
+		  "overlay ", 0, &cmdlist);
+
+  add_com_alias ("ovly", "overlay", class_alias, 1);
+  add_com_alias ("ov", "overlay", class_alias, 1);
+
+  add_cmd ("map-overlay", class_support, map_overlay_command, 
+	   "Assert that an overlay section is mapped.", &overlaylist);
+
+  add_cmd ("unmap-overlay", class_support, unmap_overlay_command, 
+	   "Assert that an overlay section is unmapped.", &overlaylist);
+
+  add_cmd ("list-overlays", class_support, list_overlays_command, 
+	   "List mappings of overlay sections.", &overlaylist);
+
+  add_cmd ("manual", class_support, overlay_manual_command, 
+	   "Enable overlay debugging.", &overlaylist);
+  add_cmd ("off", class_support, overlay_off_command, 
+	   "Disable overlay debugging.", &overlaylist);
+  add_cmd ("auto", class_support, overlay_auto_command, 
+	   "Enable automatic overlay debugging.", &overlaylist);
+  add_cmd ("load-target", class_support, overlay_load_command, 
+	   "Read the overlay mapping state from the target.", &overlaylist);
+
+  /* Filename extension to source language lookup table: */
+  init_filename_language_table ();
+  c = add_set_cmd ("extension-language", class_files, var_string_noescape,
+		   (char *) &ext_args, 
+		   "Set mapping between filename extension and source language.\n\
+Usage: set extension-language .foo bar",
+		     &setlist);
+  c->function.cfunc = set_ext_lang_command;
+
+  add_info ("extensions", info_ext_lang_command, 
+	    "All filename extensions associated with a source language.");
+}
diff --git a/gdb/symfile.h b/gdb/symfile.h
new file mode 100644
index 0000000..0363e1e
--- /dev/null
+++ b/gdb/symfile.h
@@ -0,0 +1,300 @@
+/* Definitions for reading symbol files into GDB.
+   Copyright (C) 1990, 1991, 1992, 1993, 1994, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (SYMFILE_H)
+#define SYMFILE_H
+
+/* This file requires that you first include "bfd.h".  */
+
+/* Partial symbols are stored in the psymbol_cache and pointers to them
+   are kept in a dynamically grown array that is obtained from malloc and
+   grown as necessary via realloc.  Each objfile typically has two of these,
+   one for global symbols and one for static symbols.  Although this adds
+   a level of indirection for storing or accessing the partial symbols,
+   it allows us to throw away duplicate psymbols and set all pointers
+   to the single saved instance. */
+
+struct psymbol_allocation_list {
+
+  /* Pointer to beginning of dynamically allocated array of pointers to
+   partial symbols.  The array is dynamically expanded as necessary to
+   accommodate more pointers. */
+
+  struct partial_symbol **list;
+
+  /* Pointer to next available slot in which to store a pointer to a partial
+     symbol. */
+
+  struct partial_symbol **next;
+
+  /* Number of allocated pointer slots in current dynamic array (not the
+     number of bytes of storage).  The "next" pointer will always point
+     somewhere between list[0] and list[size], and when at list[size] the
+     array will be expanded on the next attempt to store a pointer. */
+
+  int size;
+};
+
+/* Structure to keep track of symbol reading functions for various
+   object file types.  */
+
+struct sym_fns {
+
+  /* BFD flavour that we handle, or (as a special kludge, see xcoffread.c,
+     (enum bfd_flavour)-1 for xcoff).  */
+
+  enum bfd_flavour sym_flavour;
+
+  /* Initializes anything that is global to the entire symbol table.  It is
+     called during symbol_file_add, when we begin debugging an entirely new
+     program. */
+
+  void (*sym_new_init) PARAMS ((struct objfile *));
+
+  /* Reads any initial information from a symbol file, and initializes the
+     struct sym_fns SF in preparation for sym_read().  It is called every
+     time we read a symbol file for any reason. */
+
+  void (*sym_init) PARAMS ((struct objfile *));
+
+  /* sym_read (objfile, addr, mainline)
+     Reads a symbol file into a psymtab (or possibly a symtab).
+     OBJFILE is the objfile struct for the file we are reading.
+     SECTION_OFFSETS
+     are the offset between the file's specified section addresses and
+     their true addresses in memory.
+     MAINLINE is 1 if this is the
+     main symbol table being read, and 0 if a secondary
+     symbol file (e.g. shared library or dynamically loaded file)
+     is being read.  */
+
+  void (*sym_read) PARAMS ((struct objfile *, struct section_offsets *, int));
+
+  /* Called when we are finished with an objfile.  Should do all cleanup
+     that is specific to the object file format for the particular objfile. */
+ 
+  void (*sym_finish) PARAMS ((struct objfile *));
+
+  /* This function produces a file-dependent section_offsets structure,
+     allocated in the objfile's storage, and based on the parameter.
+     The parameter is currently a CORE_ADDR (FIXME!) for backward compatibility
+     with the higher levels of GDB.  It should probably be changed to
+     a string, where NULL means the default, and others are parsed in a file
+     dependent way.  The result of this function is handed in to sym_read.  */
+
+  struct section_offsets *(*sym_offsets) PARAMS ((struct objfile *, CORE_ADDR));
+
+  /* Finds the next struct sym_fns.  They are allocated and initialized
+     in whatever module implements the functions pointed to; an 
+     initializer calls add_symtab_fns to add them to the global chain.  */
+
+  struct sym_fns *next;
+
+};
+
+/* The default version of sym_fns.sym_offsets for readers that don't
+   do anything special.  */
+
+extern struct section_offsets *
+default_symfile_offsets PARAMS ((struct objfile *objfile, CORE_ADDR addr));
+
+
+extern void
+extend_psymbol_list PARAMS ((struct psymbol_allocation_list *,
+			     struct objfile *));
+
+/* Add any kind of symbol to a psymbol_allocation_list. */
+
+/* #include "demangle.h" */
+
+extern void
+add_psymbol_to_list PARAMS ((char *, int, namespace_enum, enum address_class,
+			     struct psymbol_allocation_list *, long, CORE_ADDR,
+			     enum language, struct objfile *));
+
+extern void
+add_psymbol_with_dem_name_to_list PARAMS ((char *, int, char *, int, namespace_enum, 
+                                           enum address_class,
+                                           struct psymbol_allocation_list *, 
+                                           long, CORE_ADDR,
+                                           enum language, struct objfile *));
+
+
+extern void init_psymbol_list PARAMS ((struct objfile *, int));
+
+extern void
+sort_pst_symbols PARAMS ((struct partial_symtab *));
+
+extern struct symtab *
+allocate_symtab PARAMS ((char *, struct objfile *));
+
+extern int
+free_named_symtabs PARAMS ((char *));
+
+extern void
+fill_in_vptr_fieldno PARAMS ((struct type *));
+
+extern void
+add_symtab_fns PARAMS ((struct sym_fns *));
+
+extern void
+init_entry_point_info PARAMS ((struct objfile *));
+
+extern void
+syms_from_objfile PARAMS ((struct objfile *, CORE_ADDR, int, int));
+
+extern void
+new_symfile_objfile PARAMS ((struct objfile *, int, int));
+
+extern struct partial_symtab *
+start_psymtab_common PARAMS ((struct objfile *, struct section_offsets *,
+			      char *, CORE_ADDR,
+			      struct partial_symbol **,
+			      struct partial_symbol **));
+
+/* Sorting your symbols for fast lookup or alphabetical printing.  */
+
+extern void
+sort_block_syms PARAMS ((struct block *));
+
+extern void
+sort_symtab_syms PARAMS ((struct symtab *));
+
+/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
+   (and add a null character at the end in the copy).
+   Returns the address of the copy.  */
+
+extern char *
+obsavestring PARAMS ((char *, int, struct obstack *));
+
+/* Concatenate strings S1, S2 and S3; return the new string.
+   Space is found in the symbol_obstack.  */
+
+extern char *
+obconcat PARAMS ((struct obstack *obstackp, const char *, const char *,
+		  const char *));
+
+			/*   Variables   */
+
+/* whether to auto load solibs at startup time:  0/1. 
+
+   On all platforms, 0 means "don't auto load".
+
+   On HP-UX, > 0 means a threshhold, in megabytes, of symbol table which will
+   be auto loaded.  When the cumulative size of solib symbol table exceeds
+   this threshhold, solibs' symbol tables will not be loaded.
+
+   On other platforms, > 0 means, "always auto load".
+   */
+
+extern int auto_solib_add;
+
+/* From symfile.c */
+
+extern CORE_ADDR
+entry_point_address PARAMS ((void));
+
+extern struct partial_symtab *
+allocate_psymtab PARAMS ((char *, struct objfile *));
+
+extern void
+discard_psymtab PARAMS ((struct partial_symtab *));
+
+extern void find_lowest_section PARAMS ((bfd *, asection *, PTR));
+
+extern bfd * symfile_bfd_open PARAMS ((char *));
+
+/* Remote targets may wish to use this as their load function.  */
+extern void generic_load PARAMS ((char *name, int from_tty));
+
+/* Utility functions for overlay sections: */
+extern int overlay_debugging;
+extern int overlay_cache_invalid;
+
+/* return the "mapped" overlay section  containing the PC */
+extern asection * 
+find_pc_mapped_section PARAMS ((CORE_ADDR));
+
+/* return any overlay section containing the PC (even in its LMA region) */
+extern asection *
+find_pc_overlay PARAMS ((CORE_ADDR));
+
+/* return true if the section is an overlay */
+extern int
+section_is_overlay PARAMS ((asection *));
+
+/* return true if the overlay section is currently "mapped" */
+extern int
+section_is_mapped PARAMS ((asection *));
+
+/* return true if pc belongs to section's VMA */
+extern CORE_ADDR
+pc_in_mapped_range PARAMS ((CORE_ADDR, asection *));
+
+/* return true if pc belongs to section's LMA */
+extern CORE_ADDR
+pc_in_unmapped_range PARAMS ((CORE_ADDR, asection *));
+
+/* map an address from a section's LMA to its VMA */
+extern CORE_ADDR
+overlay_mapped_address PARAMS ((CORE_ADDR, asection *));
+
+/* map an address from a section's VMA to its LMA */
+extern CORE_ADDR
+overlay_unmapped_address PARAMS ((CORE_ADDR, asection *));
+
+/* convert an address in an overlay section (force into VMA range) */
+extern CORE_ADDR 
+symbol_overlayed_address PARAMS ((CORE_ADDR, asection *));
+
+/* From dwarfread.c */
+
+extern void
+dwarf_build_psymtabs PARAMS ((struct objfile *, struct section_offsets *, int,
+			      file_ptr, unsigned int, file_ptr, unsigned int));
+
+/* From dwarf2read.c */
+
+extern int dwarf2_has_info PARAMS ((bfd *abfd));
+
+extern void dwarf2_build_psymtabs PARAMS ((struct objfile *,
+					   struct section_offsets *,
+					   int));
+/* From mdebugread.c */
+
+/* Hack to force structures to exist before use in parameter list.  */
+struct ecoff_debug_hack
+{
+  struct ecoff_debug_swap *a;
+  struct ecoff_debug_info *b;
+};
+extern void
+mdebug_build_psymtabs PARAMS ((struct objfile *,
+			       const struct ecoff_debug_swap *,
+			       struct ecoff_debug_info *,
+			       struct section_offsets *));
+
+extern void
+elfmdebug_build_psymtabs PARAMS ((struct objfile *,
+				  const struct ecoff_debug_swap *,
+				  asection *,
+				  struct section_offsets *));
+
+#endif	/* !defined(SYMFILE_H) */
diff --git a/gdb/symm-nat.c b/gdb/symm-nat.c
new file mode 100644
index 0000000..0461066
--- /dev/null
+++ b/gdb/symm-nat.c
@@ -0,0 +1,846 @@
+/* Sequent Symmetry host interface, for GDB when running under Unix.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* FIXME, some 387-specific items of use taken from i387-tdep.c -- ought to be
+   merged back in. */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "target.h"
+
+/* FIXME: What is the _INKERNEL define for?  */
+#define _INKERNEL
+#include <signal.h>
+#undef _INKERNEL
+#include <sys/wait.h>
+#include <sys/param.h>
+#include <sys/user.h>
+#include <sys/proc.h>
+#include <sys/dir.h>
+#include <sys/ioctl.h>
+#include "gdb_stat.h"
+#ifdef _SEQUENT_
+#include <sys/ptrace.h>
+#else
+/* Dynix has only machine/ptrace.h, which is already included by sys/user.h  */
+/* Dynix has no mptrace call */
+#define mptrace ptrace
+#endif
+#include "gdbcore.h"
+#include <fcntl.h>
+#include <sgtty.h>
+#define TERMINAL struct sgttyb
+
+#include "gdbcore.h"
+
+void
+store_inferior_registers(regno)
+int regno;
+{
+  struct pt_regset regs;
+  int i;
+  extern char registers[];
+
+  /* FIXME: Fetching the registers is a kludge to initialize all elements
+     in the fpu and fpa status. This works for normal debugging, but
+     might cause problems when calling functions in the inferior.
+     At least fpu_control and fpa_pcr (probably more) should be added 
+     to the registers array to solve this properly.  */
+  mptrace (XPT_RREGS, inferior_pid, (PTRACE_ARG3_TYPE) &regs, 0);
+
+  regs.pr_eax = *(int *)&registers[REGISTER_BYTE(0)];
+  regs.pr_ebx = *(int *)&registers[REGISTER_BYTE(5)];
+  regs.pr_ecx = *(int *)&registers[REGISTER_BYTE(2)];
+  regs.pr_edx = *(int *)&registers[REGISTER_BYTE(1)];
+  regs.pr_esi = *(int *)&registers[REGISTER_BYTE(6)];
+  regs.pr_edi = *(int *)&registers[REGISTER_BYTE(7)];
+  regs.pr_esp = *(int *)&registers[REGISTER_BYTE(14)];
+  regs.pr_ebp = *(int *)&registers[REGISTER_BYTE(15)];
+  regs.pr_eip = *(int *)&registers[REGISTER_BYTE(16)];
+  regs.pr_flags = *(int *)&registers[REGISTER_BYTE(17)];
+  for (i = 0; i < 31; i++)
+    {
+      regs.pr_fpa.fpa_regs[i] =
+	*(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)];
+    }
+  memcpy (regs.pr_fpu.fpu_stack[0], &registers[REGISTER_BYTE(ST0_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[1], &registers[REGISTER_BYTE(ST1_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[2], &registers[REGISTER_BYTE(ST2_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[3], &registers[REGISTER_BYTE(ST3_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[4], &registers[REGISTER_BYTE(ST4_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[5], &registers[REGISTER_BYTE(ST5_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[6], &registers[REGISTER_BYTE(ST6_REGNUM)], 10);
+  memcpy (regs.pr_fpu.fpu_stack[7], &registers[REGISTER_BYTE(ST7_REGNUM)], 10);
+  mptrace (XPT_WREGS, inferior_pid, (PTRACE_ARG3_TYPE) &regs, 0);
+}
+
+void
+fetch_inferior_registers (regno)
+     int regno;
+{
+  int i;
+  struct pt_regset regs;
+  extern char registers[];
+
+  registers_fetched ();
+
+  mptrace (XPT_RREGS, inferior_pid, (PTRACE_ARG3_TYPE) &regs, 0);
+  *(int *)&registers[REGISTER_BYTE(EAX_REGNUM)] = regs.pr_eax;
+  *(int *)&registers[REGISTER_BYTE(EBX_REGNUM)] = regs.pr_ebx;
+  *(int *)&registers[REGISTER_BYTE(ECX_REGNUM)] = regs.pr_ecx;
+  *(int *)&registers[REGISTER_BYTE(EDX_REGNUM)] = regs.pr_edx;
+  *(int *)&registers[REGISTER_BYTE(ESI_REGNUM)] = regs.pr_esi;
+  *(int *)&registers[REGISTER_BYTE(EDI_REGNUM)] = regs.pr_edi;
+  *(int *)&registers[REGISTER_BYTE(EBP_REGNUM)] = regs.pr_ebp;
+  *(int *)&registers[REGISTER_BYTE(ESP_REGNUM)] = regs.pr_esp;
+  *(int *)&registers[REGISTER_BYTE(EIP_REGNUM)] = regs.pr_eip;
+  *(int *)&registers[REGISTER_BYTE(EFLAGS_REGNUM)] = regs.pr_flags;
+  for (i = 0; i < FPA_NREGS; i++)
+    {
+      *(int *)&registers[REGISTER_BYTE(FP1_REGNUM+i)] =
+	regs.pr_fpa.fpa_regs[i];
+    }
+  memcpy (&registers[REGISTER_BYTE(ST0_REGNUM)], regs.pr_fpu.fpu_stack[0], 10);
+  memcpy (&registers[REGISTER_BYTE(ST1_REGNUM)], regs.pr_fpu.fpu_stack[1], 10);
+  memcpy (&registers[REGISTER_BYTE(ST2_REGNUM)], regs.pr_fpu.fpu_stack[2], 10);
+  memcpy (&registers[REGISTER_BYTE(ST3_REGNUM)], regs.pr_fpu.fpu_stack[3], 10);
+  memcpy (&registers[REGISTER_BYTE(ST4_REGNUM)], regs.pr_fpu.fpu_stack[4], 10);
+  memcpy (&registers[REGISTER_BYTE(ST5_REGNUM)], regs.pr_fpu.fpu_stack[5], 10);
+  memcpy (&registers[REGISTER_BYTE(ST6_REGNUM)], regs.pr_fpu.fpu_stack[6], 10);
+  memcpy (&registers[REGISTER_BYTE(ST7_REGNUM)], regs.pr_fpu.fpu_stack[7], 10);
+}
+
+/* FIXME:  This should be merged with i387-tdep.c as well. */
+static
+print_fpu_status(ep)
+struct pt_regset ep;
+{
+    int i;
+    int bothstatus;
+    int top;
+    int fpreg;
+    unsigned char *p;
+    
+    printf_unfiltered("80387:");
+    if (ep.pr_fpu.fpu_ip == 0) {
+	printf_unfiltered(" not in use.\n");
+	return;
+    } else {
+	printf_unfiltered("\n");
+    }
+    if (ep.pr_fpu.fpu_status != 0) {
+	print_387_status_word (ep.pr_fpu.fpu_status);
+    }
+    print_387_control_word (ep.pr_fpu.fpu_control);
+    printf_unfiltered ("last exception: ");
+    printf_unfiltered ("opcode 0x%x; ", ep.pr_fpu.fpu_rsvd4);
+    printf_unfiltered ("pc 0x%x:0x%x; ", ep.pr_fpu.fpu_cs, ep.pr_fpu.fpu_ip);
+    printf_unfiltered ("operand 0x%x:0x%x\n", ep.pr_fpu.fpu_data_offset, ep.pr_fpu.fpu_op_sel);
+    
+    top = (ep.pr_fpu.fpu_status >> 11) & 7;
+    
+    printf_unfiltered ("regno  tag  msb              lsb  value\n");
+    for (fpreg = 7; fpreg >= 0; fpreg--) 
+	{
+	    double val;
+	    
+	    printf_unfiltered ("%s %d: ", fpreg == top ? "=>" : "  ", fpreg);
+	    
+	    switch ((ep.pr_fpu.fpu_tag >> (fpreg * 2)) & 3) 
+		{
+		case 0: printf_unfiltered ("valid "); break;
+		case 1: printf_unfiltered ("zero  "); break;
+		case 2: printf_unfiltered ("trap  "); break;
+		case 3: printf_unfiltered ("empty "); break;
+		}
+	    for (i = 9; i >= 0; i--)
+		printf_unfiltered ("%02x", ep.pr_fpu.fpu_stack[fpreg][i]);
+	    
+	    i387_to_double ((char *)ep.pr_fpu.fpu_stack[fpreg], (char *)&val);
+	    printf_unfiltered ("  %g\n", val);
+	}
+    if (ep.pr_fpu.fpu_rsvd1)
+	warning ("rsvd1 is 0x%x\n", ep.pr_fpu.fpu_rsvd1);
+    if (ep.pr_fpu.fpu_rsvd2)
+	warning ("rsvd2 is 0x%x\n", ep.pr_fpu.fpu_rsvd2);
+    if (ep.pr_fpu.fpu_rsvd3)
+	warning ("rsvd3 is 0x%x\n", ep.pr_fpu.fpu_rsvd3);
+    if (ep.pr_fpu.fpu_rsvd5)
+	warning ("rsvd5 is 0x%x\n", ep.pr_fpu.fpu_rsvd5);
+}
+
+
+print_1167_control_word(pcr)
+unsigned int pcr;
+
+{
+    int pcr_tmp;
+
+    pcr_tmp = pcr & FPA_PCR_MODE;
+    printf_unfiltered("\tMODE= %#x; RND= %#x ", pcr_tmp, pcr_tmp & 12);
+    switch (pcr_tmp & 12) {
+    case 0:
+	printf_unfiltered("RN (Nearest Value)");
+	break;
+    case 1:
+	printf_unfiltered("RZ (Zero)");
+	break;
+    case 2:
+	printf_unfiltered("RP (Positive Infinity)");
+	break;
+    case 3:
+	printf_unfiltered("RM (Negative Infinity)");
+	break;
+    }
+    printf_unfiltered("; IRND= %d ", pcr_tmp & 2);
+    if (0 == pcr_tmp & 2) {
+	printf_unfiltered("(same as RND)\n");
+    } else {
+	printf_unfiltered("(toward zero)\n");
+    }
+    pcr_tmp = pcr & FPA_PCR_EM;
+    printf_unfiltered("\tEM= %#x", pcr_tmp);
+    if (pcr_tmp & FPA_PCR_EM_DM) printf_unfiltered(" DM");
+    if (pcr_tmp & FPA_PCR_EM_UOM) printf_unfiltered(" UOM");
+    if (pcr_tmp & FPA_PCR_EM_PM) printf_unfiltered(" PM");
+    if (pcr_tmp & FPA_PCR_EM_UM) printf_unfiltered(" UM");
+    if (pcr_tmp & FPA_PCR_EM_OM) printf_unfiltered(" OM");
+    if (pcr_tmp & FPA_PCR_EM_ZM) printf_unfiltered(" ZM");
+    if (pcr_tmp & FPA_PCR_EM_IM) printf_unfiltered(" IM");
+    printf_unfiltered("\n");
+    pcr_tmp = FPA_PCR_CC;
+    printf_unfiltered("\tCC= %#x", pcr_tmp);
+    if (pcr_tmp & FPA_PCR_20MHZ) printf_unfiltered(" 20MHZ");
+    if (pcr_tmp & FPA_PCR_CC_Z) printf_unfiltered(" Z");
+    if (pcr_tmp & FPA_PCR_CC_C2) printf_unfiltered(" C2");
+
+    /* Dynix defines FPA_PCR_CC_C0 to 0x100 and ptx defines
+       FPA_PCR_CC_C1 to 0x100.  Use whichever is defined and assume
+       the OS knows what it is doing.  */
+#ifdef FPA_PCR_CC_C1
+    if (pcr_tmp & FPA_PCR_CC_C1) printf_unfiltered(" C1");
+#else
+    if (pcr_tmp & FPA_PCR_CC_C0) printf_unfiltered(" C0");
+#endif
+
+    switch (pcr_tmp)
+      {
+      case FPA_PCR_CC_Z:
+	printf_unfiltered(" (Equal)");
+	break;
+#ifdef FPA_PCR_CC_C1
+      case FPA_PCR_CC_C1:
+#else
+      case FPA_PCR_CC_C0:
+#endif
+	printf_unfiltered(" (Less than)");
+	break;
+      case 0:
+	printf_unfiltered(" (Greater than)");
+	break;
+      case FPA_PCR_CC_Z | 
+#ifdef FPA_PCR_CC_C1
+	FPA_PCR_CC_C1
+#else
+	FPA_PCR_CC_C0
+#endif
+	  | FPA_PCR_CC_C2:
+	printf_unfiltered(" (Unordered)");
+	break;
+      default:
+	printf_unfiltered(" (Undefined)");
+	break;
+      }
+    printf_unfiltered("\n");
+    pcr_tmp = pcr & FPA_PCR_AE;
+    printf_unfiltered("\tAE= %#x", pcr_tmp);
+    if (pcr_tmp & FPA_PCR_AE_DE) printf_unfiltered(" DE");
+    if (pcr_tmp & FPA_PCR_AE_UOE) printf_unfiltered(" UOE");
+    if (pcr_tmp & FPA_PCR_AE_PE) printf_unfiltered(" PE");
+    if (pcr_tmp & FPA_PCR_AE_UE) printf_unfiltered(" UE");
+    if (pcr_tmp & FPA_PCR_AE_OE) printf_unfiltered(" OE");
+    if (pcr_tmp & FPA_PCR_AE_ZE) printf_unfiltered(" ZE");
+    if (pcr_tmp & FPA_PCR_AE_EE) printf_unfiltered(" EE");
+    if (pcr_tmp & FPA_PCR_AE_IE) printf_unfiltered(" IE");
+    printf_unfiltered("\n");
+}
+
+print_1167_regs(regs)
+long regs[FPA_NREGS];
+
+{
+    int i;
+
+    union {
+	double	d;
+	long	l[2];
+    } xd;
+    union {
+	float	f;
+	long	l;
+    } xf;
+
+
+    for (i = 0; i < FPA_NREGS; i++) {
+	xf.l = regs[i];
+	printf_unfiltered("%%fp%d: raw= %#x, single= %f", i+1, regs[i], xf.f);
+	if (!(i & 1)) {
+	    printf_unfiltered("\n");
+	} else {
+	    xd.l[1] = regs[i];
+	    xd.l[0] = regs[i+1];
+	    printf_unfiltered(", double= %f\n", xd.d);
+	}
+    }
+}
+
+print_fpa_status(ep)
+struct pt_regset ep;
+
+{
+
+    printf_unfiltered("WTL 1167:");
+    if (ep.pr_fpa.fpa_pcr !=0) {
+	printf_unfiltered("\n");
+	print_1167_control_word(ep.pr_fpa.fpa_pcr);
+	print_1167_regs(ep.pr_fpa.fpa_regs);
+    } else {
+	printf_unfiltered(" not in use.\n");
+    }
+}
+
+#if 0 /* disabled because it doesn't go through the target vector.  */
+i386_float_info ()
+{
+  char ubuf[UPAGES*NBPG];
+  struct pt_regset regset;
+
+  if (have_inferior_p())
+    {
+      PTRACE_READ_REGS (inferior_pid, (PTRACE_ARG3_TYPE) &regset);
+    }
+  else
+    {
+      int corechan = bfd_cache_lookup (core_bfd);
+      if (lseek (corechan, 0, 0) < 0)
+	{
+	  perror ("seek on core file");
+	}
+      if (myread (corechan, ubuf, UPAGES*NBPG) < 0)
+	{
+	  perror ("read on core file");
+	}
+      /* only interested in the floating point registers */
+      regset.pr_fpu = ((struct user *) ubuf)->u_fpusave;
+      regset.pr_fpa = ((struct user *) ubuf)->u_fpasave;
+    }
+  print_fpu_status(regset);
+  print_fpa_status(regset);
+}
+#endif
+
+static volatile int got_sigchld;
+
+/*ARGSUSED*/
+/* This will eventually be more interesting. */
+void
+sigchld_handler(signo)
+	int signo;
+{
+	got_sigchld++;
+}
+
+/*
+ * Signals for which the default action does not cause the process
+ * to die.  See <sys/signal.h> for where this came from (alas, we
+ * can't use those macros directly)
+ */
+#ifndef sigmask
+#define sigmask(s) (1 << ((s) - 1))
+#endif
+#define SIGNALS_DFL_SAFE sigmask(SIGSTOP) | sigmask(SIGTSTP) | \
+	sigmask(SIGTTIN) | sigmask(SIGTTOU) | sigmask(SIGCHLD) | \
+	sigmask(SIGCONT) | sigmask(SIGWINCH) | sigmask(SIGPWR) | \
+	sigmask(SIGURG) | sigmask(SIGPOLL)
+
+#ifdef ATTACH_DETACH
+/*
+ * Thanks to XPT_MPDEBUGGER, we have to mange child_wait().
+ */
+int
+child_wait(pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int save_errno, rv, xvaloff, saoff, sa_hand;
+  struct pt_stop pt;
+  struct user u;
+  sigset_t set;
+  /* Host signal number for a signal which the inferior terminates with, or
+     0 if it hasn't terminated due to a signal.  */
+  static int death_by_signal = 0;
+#ifdef SVR4_SHARED_LIBS		/* use this to distinguish ptx 2 vs ptx 4 */
+  prstatus_t pstatus;
+#endif
+
+  do {
+    set_sigint_trap();	/* Causes SIGINT to be passed on to the
+			   attached process. */
+    save_errno = errno;
+
+    got_sigchld = 0;
+
+    sigemptyset(&set);
+
+    while (got_sigchld == 0) {
+	    sigsuspend(&set);
+    }
+    
+    clear_sigint_trap();
+
+    rv = mptrace(XPT_STOPSTAT, 0, (char *)&pt, 0);
+    if (-1 == rv) {
+	    printf("XPT_STOPSTAT: errno %d\n", errno); /* DEBUG */
+	    continue;
+    }
+
+    pid = pt.ps_pid;
+
+    if (pid != inferior_pid) {
+	    /* NOTE: the mystery fork in csh/tcsh needs to be ignored.
+	     * We should not return new children for the initial run
+	     * of a process until it has done the exec.
+	     */
+	    /* inferior probably forked; send it on its way */
+	    rv = mptrace(XPT_UNDEBUG, pid, 0, 0);
+	    if (-1 == rv) {
+		    printf("child_wait: XPT_UNDEBUG: pid %d: %s\n", pid,
+			   safe_strerror(errno));
+	    }
+	    continue;
+    }
+    /* FIXME: Do we deal with fork notification correctly?  */
+    switch (pt.ps_reason) {
+    case PTS_FORK:
+	/* multi proc: treat like PTS_EXEC */
+	    /*
+	     * Pretend this didn't happen, since gdb isn't set up
+	     * to deal with stops on fork.
+	     */
+	    rv = ptrace(PT_CONTSIG, pid, 1, 0);
+	    if (-1 == rv) {
+		    printf("PTS_FORK: PT_CONTSIG: error %d\n", errno);
+	    }
+	    continue;
+    case PTS_EXEC:
+	    /*
+	     * Pretend this is a SIGTRAP.
+	     */
+	    status->kind = TARGET_WAITKIND_STOPPED;
+	    status->value.sig = TARGET_SIGNAL_TRAP;
+	    break;
+    case PTS_EXIT:
+	    /*
+	     * Note: we stop before the exit actually occurs.  Extract
+	     * the exit code from the uarea.  If we're stopped in the
+	     * exit() system call, the exit code will be in
+	     * u.u_ap[0].  An exit due to an uncaught signal will have
+	     * something else in here, see the comment in the default:
+	     * case, below.  Finally,let the process exit.
+	     */
+	    if (death_by_signal)
+	      {
+		status->kind = TARGET_WAITKIND_SIGNALED;
+		status->value.sig = target_signal_from_host (death_by_signal);
+		death_by_signal = 0;
+		break;
+	      }
+	    xvaloff = (unsigned long)&u.u_ap[0] - (unsigned long)&u;
+	    errno = 0;
+	    rv = ptrace(PT_RUSER, pid, (char *)xvaloff, 0);
+	    status->kind = TARGET_WAITKIND_EXITED;
+	    status->value.integer = rv;
+	    /*
+	     * addr & data to mptrace() don't matter here, since
+	     * the process is already dead.
+	     */
+	    rv = mptrace(XPT_UNDEBUG, pid, 0, 0);
+	    if (-1 == rv) {
+		    printf("child_wait: PTS_EXIT: XPT_UNDEBUG: pid %d error %d\n", pid,
+			   errno);
+	    }
+	    break;
+    case PTS_WATCHPT_HIT:
+	    fatal("PTS_WATCHPT_HIT\n");
+	    break;
+    default:
+	    /* stopped by signal */
+	    status->kind = TARGET_WAITKIND_STOPPED;
+	    status->value.sig = target_signal_from_host (pt.ps_reason);
+	    death_by_signal = 0;
+
+	    if (0 == (SIGNALS_DFL_SAFE & sigmask(pt.ps_reason))) {
+		    break;
+	    }
+	    /* else default action of signal is to die */
+#ifdef SVR4_SHARED_LIBS
+	    rv = ptrace(PT_GET_PRSTATUS, pid, (char *)&pstatus, 0);
+	    if (-1 == rv)
+		error("child_wait: signal %d PT_GET_PRSTATUS: %s\n",
+			pt.ps_reason, safe_strerror(errno));
+	    if (pstatus.pr_cursig != pt.ps_reason) {
+		printf("pstatus signal %d, pt signal %d\n",
+			pstatus.pr_cursig, pt.ps_reason);
+	    }
+	    sa_hand = (int)pstatus.pr_action.sa_handler;
+#else
+	    saoff = (unsigned long)&u.u_sa[0] - (unsigned long)&u;
+	    saoff += sizeof(struct sigaction) * (pt.ps_reason - 1);
+	    errno = 0;
+	    sa_hand = ptrace(PT_RUSER, pid, (char *)saoff, 0);
+	    if (errno)
+		    error("child_wait: signal %d: RUSER: %s\n",
+			   pt.ps_reason, safe_strerror(errno));
+#endif
+	    if ((int)SIG_DFL == sa_hand) {
+		    /* we will be dying */
+		    death_by_signal = pt.ps_reason;
+	    }
+	    break;
+    }
+
+  } while (pid != inferior_pid); /* Some other child died or stopped */
+
+  return pid;
+}
+#else /* !ATTACH_DETACH */
+/*
+ * Simple child_wait() based on inftarg.c child_wait() for use until
+ * the MPDEBUGGER child_wait() works properly.  This will go away when
+ * that is fixed.
+ */
+child_wait (pid, ourstatus)
+     int pid;
+     struct target_waitstatus *ourstatus;
+{
+  int save_errno;
+  int status;
+
+  do {
+    pid = wait (&status);
+    save_errno = errno;
+
+    if (pid == -1)
+      {
+	if (save_errno == EINTR)
+	  continue;
+	fprintf (stderr, "Child process unexpectedly missing: %s.\n",
+		 safe_strerror (save_errno));
+	ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+	ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+        return -1;
+      }
+  } while (pid != inferior_pid); /* Some other child died or stopped */
+  store_waitstatus (ourstatus, status);
+  return pid;
+}
+#endif /* ATTACH_DETACH */
+
+
+
+/* This function simply calls ptrace with the given arguments.  
+   It exists so that all calls to ptrace are isolated in this 
+   machine-dependent file. */
+int
+call_ptrace (request, pid, addr, data)
+     int request, pid;
+     PTRACE_ARG3_TYPE addr;
+     int data;
+{
+  return ptrace (request, pid, addr, data);
+}
+
+int
+call_mptrace(request, pid, addr, data)
+	int request, pid;
+	PTRACE_ARG3_TYPE addr;
+	int data;
+{
+	return mptrace(request, pid, addr, data);
+}
+
+#if defined (DEBUG_PTRACE)
+/* For the rest of the file, use an extra level of indirection */
+/* This lets us breakpoint usefully on call_ptrace. */
+#define ptrace call_ptrace
+#define mptrace call_mptrace
+#endif
+
+void
+kill_inferior ()
+{
+  if (inferior_pid == 0)
+    return;
+
+  /* For MPDEBUGGER, don't use PT_KILL, since the child will stop
+     again with a PTS_EXIT.  Just hit him with SIGKILL (so he stops)
+     and detach. */
+
+  kill (inferior_pid, SIGKILL);
+#ifdef ATTACH_DETACH
+  detach(SIGKILL);
+#else /* ATTACH_DETACH */
+  ptrace(PT_KILL, inferior_pid, 0, 0);
+  wait((int *)NULL);
+#endif /* ATTACH_DETACH */
+  target_mourn_inferior ();
+}
+
+/* Resume execution of the inferior process.
+   If STEP is nonzero, single-step it.
+   If SIGNAL is nonzero, give it that signal.  */
+
+void
+child_resume (pid, step, signal)
+     int pid;
+     int step;
+     enum target_signal signal;
+{
+  errno = 0;
+
+  if (pid == -1)
+    pid = inferior_pid;
+
+  /* An address of (PTRACE_ARG3_TYPE)1 tells ptrace to continue from where
+     it was.  (If GDB wanted it to start some other way, we have already
+     written a new PC value to the child.)
+
+     If this system does not support PT_SSTEP, a higher level function will
+     have called single_step() to transmute the step request into a
+     continue request (by setting breakpoints on all possible successor
+     instructions), so we don't have to worry about that here.  */
+
+  if (step)
+    ptrace (PT_SSTEP,     pid, (PTRACE_ARG3_TYPE) 1, signal);
+  else
+    ptrace (PT_CONTSIG, pid, (PTRACE_ARG3_TYPE) 1, signal);
+
+  if (errno)
+    perror_with_name ("ptrace");
+}
+
+#ifdef ATTACH_DETACH
+/* Start debugging the process whose number is PID.  */
+int
+attach (pid)
+     int pid;
+{
+	sigset_t set;
+	int rv;
+
+	rv = mptrace(XPT_DEBUG, pid, 0, 0);
+	if (-1 == rv) {
+		error("mptrace(XPT_DEBUG): %s", safe_strerror(errno));
+	}
+	rv = mptrace(XPT_SIGNAL, pid, 0, SIGSTOP);
+	if (-1 == rv) {
+		error("mptrace(XPT_SIGNAL): %s", safe_strerror(errno));
+	}
+	attach_flag = 1;
+	return pid;
+}
+
+void
+detach (signo)
+     int signo;
+{
+	int rv;
+
+	rv = mptrace(XPT_UNDEBUG, inferior_pid, 1, signo);
+	if (-1 == rv) {
+		error("mptrace(XPT_UNDEBUG): %s", safe_strerror(errno));
+	}
+	attach_flag = 0;
+}
+
+#endif /* ATTACH_DETACH */
+
+/* Default the type of the ptrace transfer to int.  */
+#ifndef PTRACE_XFER_TYPE
+#define PTRACE_XFER_TYPE int
+#endif
+
+
+/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
+   in the NEW_SUN_PTRACE case.
+   It ought to be straightforward.  But it appears that writing did
+   not write the data that I specified.  I cannot understand where
+   it got the data that it actually did write.  */
+
+/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
+   to debugger memory starting at MYADDR.   Copy to inferior if
+   WRITE is nonzero.
+  
+   Returns the length copied, which is either the LEN argument or zero.
+   This xfer function does not do partial moves, since child_ops
+   doesn't allow memory operations to cross below us in the target stack
+   anyway.  */
+
+int
+child_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  register int i;
+  /* Round starting address down to longword boundary.  */
+  register CORE_ADDR addr = memaddr & - sizeof (PTRACE_XFER_TYPE);
+  /* Round ending address up; get number of longwords that makes.  */
+  register int count
+    = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
+      / sizeof (PTRACE_XFER_TYPE);
+  /* Allocate buffer of that many longwords.  */
+  register PTRACE_XFER_TYPE *buffer
+    = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
+
+  if (write)
+    {
+      /* Fill start and end extra bytes of buffer with existing memory data.  */
+
+      if (addr != memaddr || len < (int) sizeof (PTRACE_XFER_TYPE)) {
+	/* Need part of initial word -- fetch it.  */
+        buffer[0] = ptrace (PT_RTEXT, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+			    0);
+      }
+
+      if (count > 1)		/* FIXME, avoid if even boundary */
+	{
+	  buffer[count - 1]
+	    = ptrace (PT_RTEXT, inferior_pid,
+		      ((PTRACE_ARG3_TYPE)
+		       (addr + (count - 1) * sizeof (PTRACE_XFER_TYPE))),
+		      0);
+	}
+
+      /* Copy data to be written over corresponding part of buffer */
+
+      memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+	      myaddr,
+	      len);
+
+      /* Write the entire buffer.  */
+
+      for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  ptrace (PT_WDATA, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+		  buffer[i]);
+	  if (errno)
+	    {
+	      /* Using the appropriate one (I or D) is necessary for
+		 Gould NP1, at least.  */
+	      errno = 0;
+	      ptrace (PT_WTEXT, inferior_pid, (PTRACE_ARG3_TYPE) addr,
+		      buffer[i]);
+	    }
+	  if (errno)
+	    return 0;
+	}
+    }
+  else
+    {
+      /* Read all the longwords */
+      for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
+	{
+	  errno = 0;
+	  buffer[i] = ptrace (PT_RTEXT, inferior_pid,
+			      (PTRACE_ARG3_TYPE) addr, 0);
+	  if (errno)
+	    return 0;
+	  QUIT;
+	}
+
+      /* Copy appropriate bytes out of the buffer.  */
+      memcpy (myaddr,
+	      (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
+	      len);
+    }
+  return len;
+}
+
+
+void
+_initialize_symm_nat ()
+{
+#ifdef ATTACH_DETACH
+/*
+ * the MPDEBUGGER is necessary for process tree debugging and attach
+ * to work, but it alters the behavior of debugged processes, so other
+ * things (at least child_wait()) will have to change to accomodate
+ * that.
+ *
+ * Note that attach is not implemented in dynix 3, and not in ptx
+ * until version 2.1 of the OS.
+ */
+	int rv;
+	sigset_t set;
+	struct sigaction sact;
+
+	rv = mptrace(XPT_MPDEBUGGER, 0, 0, 0);
+	if (-1 == rv) {
+		fatal("_initialize_symm_nat(): mptrace(XPT_MPDEBUGGER): %s",
+		      safe_strerror(errno));
+	}
+
+	/*
+	 * Under MPDEBUGGER, we get SIGCLHD when a traced process does
+	 * anything of interest.
+	 */
+
+	/*
+	 * Block SIGCHLD.  We leave it blocked all the time, and then
+	 * call sigsuspend() in child_wait() to wait for the child
+	 * to do something.  None of these ought to fail, but check anyway.
+	 */
+	sigemptyset(&set);
+	rv = sigaddset(&set, SIGCHLD);
+	if (-1 == rv) {
+		fatal("_initialize_symm_nat(): sigaddset(SIGCHLD): %s",
+		      safe_strerror(errno));
+	}
+	rv = sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL);
+	if (-1 == rv) {
+		fatal("_initialize_symm_nat(): sigprocmask(SIG_BLOCK): %s",
+		      safe_strerror(errno));
+	}
+
+	sact.sa_handler = sigchld_handler;
+	sigemptyset(&sact.sa_mask);
+	sact.sa_flags = SA_NOCLDWAIT; /* keep the zombies away */
+	rv = sigaction(SIGCHLD, &sact, (struct sigaction *)NULL);
+	if (-1 == rv) {
+		fatal("_initialize_symm_nat(): sigaction(SIGCHLD): %s",
+		      safe_strerror(errno));
+	}
+#endif
+}
diff --git a/gdb/symm-tdep.c b/gdb/symm-tdep.c
new file mode 100644
index 0000000..aaf73e9
--- /dev/null
+++ b/gdb/symm-tdep.c
@@ -0,0 +1,93 @@
+/* Sequent Symmetry target interface, for GDB.
+   Copyright (C) 1986, 1987, 1989, 1991, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* many 387-specific items of use taken from i386-dep.c */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+
+#include <signal.h>
+#include <sys/param.h>
+#include <sys/user.h>
+#include <sys/dir.h>
+#include <sys/ioctl.h>
+#include "gdb_stat.h"
+#include "gdbcore.h"
+#include <fcntl.h>
+
+void
+symmetry_extract_return_value(type, regbuf, valbuf)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+{
+  union { 
+    double	d; 
+    int	l[2]; 
+  } xd; 
+  struct minimal_symbol *msymbol;
+  float f;
+
+  if (TYPE_CODE_FLT == TYPE_CODE(type)) { 
+    msymbol = lookup_minimal_symbol ("1167_flt", NULL, NULL);
+    if (msymbol != NULL) {
+      /* found "1167_flt" means 1167, %fp2-%fp3 */ 
+      /* float & double; 19= %fp2, 20= %fp3 */
+      /* no single precision on 1167 */
+      xd.l[1] = *((int *)&regbuf[REGISTER_BYTE(19)]);
+      xd.l[0] = *((int *)&regbuf[REGISTER_BYTE(20)]);
+      switch (TYPE_LENGTH(type)) {
+      case 4:
+	/* FIXME: broken for cross-debugging.  */
+	f = (float) xd.d;
+	memcpy (valbuf, &f, TYPE_LENGTH(type));
+	break;
+      case 8:
+	/* FIXME: broken for cross-debugging.  */
+	memcpy (valbuf, &xd.d, TYPE_LENGTH(type)); 
+	break;
+      default:
+	error("Unknown floating point size");
+	break;
+      }
+    } else { 
+      /* 387 %st(0), gcc uses this */ 
+      i387_to_double(((int *)&regbuf[REGISTER_BYTE(3)]),
+		     &xd.d); 
+      switch (TYPE_LENGTH(type)) {
+      case 4:			/* float */
+	f = (float) xd.d;
+	/* FIXME: broken for cross-debugging.  */
+	memcpy (valbuf, &f, 4); 
+	break;
+      case 8:			/* double */
+	/* FIXME: broken for cross-debugging.  */
+	memcpy (valbuf, &xd.d, 8);
+	break;
+      default:
+	error("Unknown floating point size");
+	break;
+      }
+    }
+  } else {
+    memcpy (valbuf, regbuf, TYPE_LENGTH (type)); 
+  }
+}
diff --git a/gdb/symmisc.c b/gdb/symmisc.c
new file mode 100644
index 0000000..97d2f6e
--- /dev/null
+++ b/gdb/symmisc.c
@@ -0,0 +1,1098 @@
+/* Do various things to symbol tables (other than lookup), for GDB.
+   Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "breakpoint.h"
+#include "command.h"
+#include "obstack.h"
+#include "language.h"
+#include "bcache.h"
+
+#include "gdb_string.h"
+
+#ifndef DEV_TTY
+#define DEV_TTY "/dev/tty"
+#endif
+
+/* Unfortunately for debugging, stderr is usually a macro.  This is painful
+   when calling functions that take FILE *'s from the debugger.
+   So we make a variable which has the same value and which is accessible when
+   debugging GDB with itself.  Because stdin et al need not be constants,
+   we initialize them in the _initialize_symmisc function at the bottom
+   of the file.  */
+FILE *std_in;
+FILE *std_out;
+FILE *std_err;
+
+/* Prototypes for local functions */
+
+static void dump_symtab PARAMS ((struct objfile *, struct symtab *, 
+                                 GDB_FILE *));
+
+static void dump_psymtab PARAMS ((struct objfile *, struct partial_symtab *, 
+                                  GDB_FILE *));
+
+static void dump_msymbols PARAMS ((struct objfile *, GDB_FILE *));
+
+static void dump_objfile PARAMS ((struct objfile *));
+
+static int block_depth PARAMS ((struct block *));
+
+static void print_partial_symbols PARAMS ((struct partial_symbol **, int, 
+                                           char *, GDB_FILE *));
+
+static void free_symtab_block PARAMS ((struct objfile *, struct block *));
+
+void _initialize_symmisc PARAMS ((void));
+
+struct print_symbol_args {
+  struct symbol *symbol;
+  int depth;
+  GDB_FILE *outfile;
+};
+
+static int print_symbol PARAMS ((PTR));
+
+static void
+free_symtab_block PARAMS ((struct objfile *, struct block *));
+
+
+/* Free a struct block <- B and all the symbols defined in that block.  */
+
+static void
+free_symtab_block (objfile, b)
+     struct objfile *objfile;
+     struct block *b;
+{
+  register int i, n;
+  n = BLOCK_NSYMS (b);
+  for (i = 0; i < n; i++)
+    {
+      mfree (objfile -> md, SYMBOL_NAME (BLOCK_SYM (b, i)));
+      mfree (objfile -> md, (PTR) BLOCK_SYM (b, i));
+    }
+  mfree (objfile -> md, (PTR) b);
+}
+
+/* Free all the storage associated with the struct symtab <- S.
+   Note that some symtabs have contents malloc'ed structure by structure,
+   while some have contents that all live inside one big block of memory,
+   and some share the contents of another symbol table and so you should
+   not free the contents on their behalf (except sometimes the linetable,
+   which maybe per symtab even when the rest is not).
+   It is s->free_code that says which alternative to use.  */
+
+void
+free_symtab (s)
+     register struct symtab *s;
+{
+  register int i, n;
+  register struct blockvector *bv;
+
+  switch (s->free_code)
+    {
+    case free_nothing:
+      /* All the contents are part of a big block of memory (an obstack),
+	 and some other symtab is in charge of freeing that block.
+	 Therefore, do nothing.  */
+      break;
+
+    case free_contents:
+      /* Here all the contents were malloc'ed structure by structure
+	 and must be freed that way.  */
+      /* First free the blocks (and their symbols.  */
+      bv = BLOCKVECTOR (s);
+      n = BLOCKVECTOR_NBLOCKS (bv);
+      for (i = 0; i < n; i++)
+	free_symtab_block (s -> objfile, BLOCKVECTOR_BLOCK (bv, i));
+      /* Free the blockvector itself.  */
+      mfree (s -> objfile -> md, (PTR) bv);
+      /* Also free the linetable.  */
+      
+    case free_linetable:
+      /* Everything will be freed either by our `free_ptr'
+	 or by some other symtab, except for our linetable.
+	 Free that now.  */
+      if (LINETABLE (s))
+	mfree (s -> objfile -> md, (PTR) LINETABLE (s));
+      break;
+    }
+
+  /* If there is a single block of memory to free, free it.  */
+  if (s -> free_ptr != NULL)
+    mfree (s -> objfile -> md, s -> free_ptr);
+
+  /* Free source-related stuff */
+  if (s -> line_charpos != NULL)
+    mfree (s -> objfile -> md, (PTR) s -> line_charpos);
+  if (s -> fullname != NULL)
+    mfree (s -> objfile -> md, s -> fullname);
+  if (s -> debugformat != NULL)
+    mfree (s -> objfile -> md, s -> debugformat);
+  mfree (s -> objfile -> md, (PTR) s);
+}
+
+#if MAINTENANCE_CMDS
+
+void
+print_symbol_bcache_statistics ()
+{
+  struct objfile *objfile;
+
+  immediate_quit++;
+  ALL_OBJFILES (objfile)
+    {
+      printf_filtered ("Byte cache statistics for '%s':\n", objfile -> name);
+      print_bcache_statistics (&objfile -> psymbol_cache, "partial symbol cache");
+    }
+  immediate_quit--;
+}
+
+void
+print_objfile_statistics ()
+{
+  struct objfile *objfile;
+
+  immediate_quit++;
+  ALL_OBJFILES (objfile)
+    {
+      printf_filtered ("Statistics for '%s':\n", objfile -> name);
+      if (OBJSTAT (objfile, n_stabs) > 0)
+	printf_filtered ("  Number of \"stab\" symbols read: %d\n",
+			 OBJSTAT (objfile, n_stabs));
+      if (OBJSTAT (objfile, n_minsyms) > 0)
+	printf_filtered ("  Number of \"minimal\" symbols read: %d\n",
+			 OBJSTAT (objfile, n_minsyms));
+      if (OBJSTAT (objfile, n_psyms) > 0)
+	printf_filtered ("  Number of \"partial\" symbols read: %d\n",
+			 OBJSTAT (objfile, n_psyms));
+      if (OBJSTAT (objfile, n_syms) > 0)
+	printf_filtered ("  Number of \"full\" symbols read: %d\n",
+			 OBJSTAT (objfile, n_syms));
+      if (OBJSTAT (objfile, n_types) > 0)
+	printf_filtered ("  Number of \"types\" defined: %d\n",
+			 OBJSTAT (objfile, n_types));
+      if (OBJSTAT (objfile, sz_strtab) > 0)
+	printf_filtered ("  Space used by a.out string tables: %d\n",
+			 OBJSTAT (objfile, sz_strtab));
+      printf_filtered ("  Total memory used for psymbol obstack: %d\n",
+		       obstack_memory_used (&objfile -> psymbol_obstack));
+      printf_filtered ("  Total memory used for psymbol cache: %d\n",
+		       obstack_memory_used (&objfile -> psymbol_cache.cache));
+      printf_filtered ("  Total memory used for symbol obstack: %d\n",
+		       obstack_memory_used (&objfile -> symbol_obstack));
+      printf_filtered ("  Total memory used for type obstack: %d\n",
+		       obstack_memory_used (&objfile -> type_obstack));
+    }
+  immediate_quit--;
+}
+
+static void 
+dump_objfile (objfile)
+     struct objfile *objfile;
+{
+  struct symtab *symtab;
+  struct partial_symtab *psymtab;
+
+  printf_filtered ("\nObject file %s:  ", objfile -> name);
+  printf_filtered ("Objfile at ");
+  gdb_print_address (objfile, gdb_stdout);
+  printf_filtered (", bfd at ");
+  gdb_print_address (objfile->obfd, gdb_stdout);
+  printf_filtered (", %d minsyms\n\n",
+		   objfile->minimal_symbol_count);
+
+  if (objfile -> psymtabs)
+    {
+      printf_filtered ("Psymtabs:\n");
+      for (psymtab = objfile -> psymtabs;
+	   psymtab != NULL;
+	   psymtab = psymtab -> next)
+	{
+	  printf_filtered ("%s at ",
+			   psymtab -> filename);
+	  gdb_print_address (psymtab, gdb_stdout);
+	  printf_filtered (", ");
+	  if (psymtab -> objfile != objfile)
+	    {
+	      printf_filtered ("NOT ON CHAIN!  ");
+	    }
+	  wrap_here ("  ");
+	}
+      printf_filtered ("\n\n");
+    }
+
+  if (objfile -> symtabs)
+    {
+      printf_filtered ("Symtabs:\n");
+      for (symtab = objfile -> symtabs;
+	   symtab != NULL;
+	   symtab = symtab->next)
+	{
+	  printf_filtered ("%s at ", symtab -> filename);
+	  gdb_print_address (symtab, gdb_stdout);
+	  printf_filtered (", ");
+	  if (symtab -> objfile != objfile)
+	    {
+	      printf_filtered ("NOT ON CHAIN!  ");
+	    }
+	  wrap_here ("  ");
+	}
+      printf_filtered ("\n\n");
+    }
+}
+
+/* Print minimal symbols from this objfile.  */
+ 
+static void 
+dump_msymbols (objfile, outfile)
+     struct objfile *objfile;
+     GDB_FILE *outfile;
+{
+  struct minimal_symbol *msymbol;
+  int index;
+  char ms_type;
+  
+  fprintf_filtered (outfile, "\nObject file %s:\n\n", objfile -> name);
+  if (objfile -> minimal_symbol_count == 0)
+    {
+      fprintf_filtered (outfile, "No minimal symbols found.\n");
+      return;
+    }
+  for (index = 0, msymbol = objfile -> msymbols;
+       SYMBOL_NAME (msymbol) != NULL; msymbol++, index++)
+    {
+      switch (msymbol -> type)
+	{
+	  case mst_unknown:
+	    ms_type = 'u';
+	    break;
+	  case mst_text:
+	    ms_type = 'T';
+	    break;
+	  case mst_solib_trampoline:
+	    ms_type = 'S';
+	    break;
+	  case mst_data:
+	    ms_type = 'D';
+	    break;
+	  case mst_bss:
+	    ms_type = 'B';
+	    break;
+	  case mst_abs:
+	    ms_type = 'A';
+	    break;
+	  case mst_file_text:
+	    ms_type = 't';
+	    break;
+	  case mst_file_data:
+	    ms_type = 'd';
+	    break;
+	  case mst_file_bss:
+	    ms_type = 'b';
+	    break;
+	  default:
+	    ms_type = '?';
+	    break;
+	}
+      fprintf_filtered (outfile, "[%2d] %c ", index, ms_type);
+      print_address_numeric (SYMBOL_VALUE_ADDRESS (msymbol), 1, outfile);
+      fprintf_filtered (outfile, " %s", SYMBOL_NAME (msymbol));
+      if (SYMBOL_BFD_SECTION (msymbol))
+	fprintf_filtered (outfile, " section %s",
+			  bfd_section_name (objfile->obfd,
+					    SYMBOL_BFD_SECTION (msymbol)));
+      if (SYMBOL_DEMANGLED_NAME (msymbol) != NULL)
+	{
+	  fprintf_filtered (outfile, "  %s", SYMBOL_DEMANGLED_NAME (msymbol));
+	}
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+      if (msymbol->filename)
+	fprintf_filtered (outfile, "  %s", msymbol->filename);
+#endif
+      fputs_filtered ("\n", outfile);
+    }
+  if (objfile -> minimal_symbol_count != index)
+    {
+      warning ("internal error:  minimal symbol count %d != %d",
+	       objfile -> minimal_symbol_count, index);
+    }
+  fprintf_filtered (outfile, "\n");
+}
+
+static void
+dump_psymtab (objfile, psymtab, outfile)
+     struct objfile *objfile;
+     struct partial_symtab *psymtab;
+     GDB_FILE *outfile;
+{
+  int i;
+
+  fprintf_filtered (outfile, "\nPartial symtab for source file %s ",
+		    psymtab -> filename);
+  fprintf_filtered (outfile, "(object ");
+  gdb_print_address (psymtab, outfile);
+  fprintf_filtered (outfile, ")\n\n");
+  fprintf_unfiltered (outfile, "  Read from object file %s (",
+		      objfile -> name);
+  gdb_print_address (objfile, outfile);
+  fprintf_unfiltered (outfile, ")\n");
+
+  if (psymtab -> readin)
+    {
+      fprintf_filtered (outfile,
+		"  Full symtab was read (at ");
+      gdb_print_address (psymtab->symtab, outfile);
+      fprintf_filtered (outfile, " by function at ");
+      gdb_print_address ((PTR)psymtab->read_symtab, outfile);
+      fprintf_filtered (outfile, ")\n");
+    }
+
+  fprintf_filtered (outfile, "  Relocate symbols by ");
+  for (i = 0; i < psymtab->objfile->num_sections; ++i)
+    {
+      if (i != 0)
+	fprintf_filtered (outfile, ", ");
+      wrap_here ("    ");
+      print_address_numeric (ANOFFSET (psymtab->section_offsets, i),
+			     1,
+			     outfile);
+    }
+  fprintf_filtered (outfile, "\n");
+
+  fprintf_filtered (outfile, "  Symbols cover text addresses ");
+  print_address_numeric (psymtab->textlow, 1, outfile);
+  fprintf_filtered (outfile, "-");
+  print_address_numeric (psymtab->texthigh, 1, outfile);
+  fprintf_filtered (outfile, "\n");
+  fprintf_filtered (outfile, "  Depends on %d other partial symtabs.\n",
+		    psymtab -> number_of_dependencies);
+  for (i = 0; i < psymtab -> number_of_dependencies; i++)
+    {
+      fprintf_filtered (outfile, "    %d ", i);
+      gdb_print_address (psymtab -> dependencies[i], outfile);
+      fprintf_filtered (outfile, " %s\n",
+			psymtab -> dependencies[i] -> filename);
+    }
+  if (psymtab -> n_global_syms > 0)
+    {
+      print_partial_symbols (objfile -> global_psymbols.list
+			    + psymtab -> globals_offset,
+			    psymtab -> n_global_syms, "Global", outfile);
+    }
+  if (psymtab -> n_static_syms > 0)
+    {
+      print_partial_symbols (objfile -> static_psymbols.list
+			    + psymtab -> statics_offset,
+			    psymtab -> n_static_syms, "Static", outfile);
+    }
+  fprintf_filtered (outfile, "\n");
+}
+
+static void 
+dump_symtab (objfile, symtab, outfile)
+     struct objfile *objfile;
+     struct symtab *symtab;
+     GDB_FILE *outfile;
+{
+  register int i, j;
+  int len, blen;
+  register struct linetable *l;
+  struct blockvector *bv;
+  register struct block *b;
+  int depth;
+
+  fprintf_filtered (outfile, "\nSymtab for file %s\n", symtab->filename);
+  if (symtab->dirname)
+    fprintf_filtered (outfile, "Compilation directory is %s\n",
+		      symtab->dirname);
+  fprintf_filtered (outfile, "Read from object file %s (", objfile->name);
+  gdb_print_address (objfile, outfile);
+  fprintf_filtered (outfile, ")\n");
+  fprintf_filtered (outfile, "Language: %s\n", language_str (symtab->language));
+
+  /* First print the line table.  */
+  l = LINETABLE (symtab);
+  if (l)
+    {
+      fprintf_filtered (outfile, "\nLine table:\n\n");
+      len = l->nitems;
+      for (i = 0; i < len; i++)
+	{
+	  fprintf_filtered (outfile, " line %d at ", l->item[i].line);
+	  print_address_numeric (l->item[i].pc, 1, outfile);
+	  fprintf_filtered (outfile, "\n");
+	}
+    }
+  /* Now print the block info, but only for primary symtabs since we will
+     print lots of duplicate info otherwise. */
+  if (symtab -> primary)
+    {
+      fprintf_filtered (outfile, "\nBlockvector:\n\n");
+      bv = BLOCKVECTOR (symtab);
+      len = BLOCKVECTOR_NBLOCKS (bv);
+      for (i = 0; i < len; i++)
+	{
+	  b = BLOCKVECTOR_BLOCK (bv, i);
+	  depth = block_depth (b) * 2;
+	  print_spaces (depth, outfile);
+	  fprintf_filtered (outfile, "block #%03d, object at ", i);
+	  gdb_print_address (b, outfile);
+	  if (BLOCK_SUPERBLOCK (b))
+	    {
+	      fprintf_filtered (outfile, " under ");
+	      gdb_print_address (BLOCK_SUPERBLOCK (b), outfile);
+	    }
+	  blen = BLOCK_NSYMS (b);
+	  fprintf_filtered (outfile, ", %d syms in ", blen);
+	  print_address_numeric (BLOCK_START (b), 1, outfile);
+	  fprintf_filtered (outfile, "..");
+	  print_address_numeric (BLOCK_END (b), 1, outfile);
+	  if (BLOCK_FUNCTION (b))
+	    {
+	      fprintf_filtered (outfile, ", function %s", SYMBOL_NAME (BLOCK_FUNCTION (b)));
+	      if (SYMBOL_DEMANGLED_NAME (BLOCK_FUNCTION (b)) != NULL)
+		{
+		  fprintf_filtered (outfile, ", %s",
+				    SYMBOL_DEMANGLED_NAME (BLOCK_FUNCTION (b)));
+		}
+	    }
+	  if (BLOCK_GCC_COMPILED(b))
+	    fprintf_filtered (outfile, ", compiled with gcc%d", BLOCK_GCC_COMPILED(b));
+	  fprintf_filtered (outfile, "\n");
+	  /* Now print each symbol in this block */
+	  for (j = 0; j < blen; j++)
+	    {
+	      struct print_symbol_args s;
+	      s.symbol = BLOCK_SYM (b, j);
+	      s.depth = depth + 1;
+	      s.outfile = outfile;
+	      catch_errors (print_symbol, &s, "Error printing symbol:\n",
+			    RETURN_MASK_ALL);
+	    }
+	}
+      fprintf_filtered (outfile, "\n");
+    }
+  else
+    {
+      fprintf_filtered (outfile, "\nBlockvector same as previous symtab\n\n");
+    }
+}
+
+void
+maintenance_print_symbols (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  GDB_FILE *outfile;
+  struct cleanup *cleanups;
+  char *symname = NULL;
+  char *filename = DEV_TTY;
+  struct objfile *objfile;
+  struct symtab *s;
+
+  dont_repeat ();
+
+  if (args == NULL)
+    {
+      error ("\
+Arguments missing: an output file name and an optional symbol file name");
+    }
+  else if ((argv = buildargv (args)) == NULL)
+    {
+      nomem (0);
+    }
+  cleanups = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+
+  if (argv[0] != NULL)
+    {
+      filename = argv[0];
+      /* If a second arg is supplied, it is a source file name to match on */
+      if (argv[1] != NULL)
+	{
+	  symname = argv[1];
+	}
+    }
+
+  filename = tilde_expand (filename);
+  make_cleanup (free, filename);
+  
+  outfile = gdb_fopen (filename, FOPEN_WT);
+  if (outfile == 0)
+    perror_with_name (filename);
+  make_cleanup ((make_cleanup_func) gdb_fclose, (char *) &outfile);
+
+  immediate_quit++;
+  ALL_SYMTABS (objfile, s)
+    if (symname == NULL || (STREQ (symname, s -> filename)))
+      dump_symtab (objfile, s, outfile);
+  immediate_quit--;
+  do_cleanups (cleanups);
+}
+
+/* Print symbol ARGS->SYMBOL on ARGS->OUTFILE.  ARGS->DEPTH says how
+   far to indent.  ARGS is really a struct print_symbol_args *, but is
+   declared as char * to get it past catch_errors.  Returns 0 for error,
+   1 for success.  */
+
+static int
+print_symbol (args)
+     PTR args;
+{
+  struct symbol *symbol = ((struct print_symbol_args *)args)->symbol;
+  int depth = ((struct print_symbol_args *)args)->depth;
+  GDB_FILE *outfile = ((struct print_symbol_args *)args)->outfile;
+
+  print_spaces (depth, outfile);
+  if (SYMBOL_NAMESPACE (symbol) == LABEL_NAMESPACE)
+    {
+      fprintf_filtered (outfile, "label %s at ", SYMBOL_SOURCE_NAME (symbol));
+      print_address_numeric (SYMBOL_VALUE_ADDRESS (symbol), 1, outfile);
+      if (SYMBOL_BFD_SECTION (symbol))
+	fprintf_filtered (outfile, " section %s\n",
+			  bfd_section_name (SYMBOL_BFD_SECTION (symbol)->owner,
+					    SYMBOL_BFD_SECTION (symbol)));
+      else
+	fprintf_filtered (outfile, "\n");
+      return 1;
+    }
+  if (SYMBOL_NAMESPACE (symbol) == STRUCT_NAMESPACE)
+    {
+      if (TYPE_TAG_NAME (SYMBOL_TYPE (symbol)))
+	{
+	  LA_PRINT_TYPE (SYMBOL_TYPE (symbol), "", outfile, 1, depth);
+	}
+      else
+	{
+	  fprintf_filtered (outfile, "%s %s = ",
+	       (TYPE_CODE (SYMBOL_TYPE (symbol)) == TYPE_CODE_ENUM
+		? "enum"
+		: (TYPE_CODE (SYMBOL_TYPE (symbol)) == TYPE_CODE_STRUCT
+		   ? "struct" : "union")),
+	       SYMBOL_NAME (symbol));
+	  LA_PRINT_TYPE (SYMBOL_TYPE (symbol), "", outfile, 1, depth);
+	}
+      fprintf_filtered (outfile, ";\n");
+    }
+  else
+    {
+      if (SYMBOL_CLASS (symbol) == LOC_TYPEDEF)
+	fprintf_filtered (outfile, "typedef ");
+      if (SYMBOL_TYPE (symbol))
+	{
+	  /* Print details of types, except for enums where it's clutter.  */
+	  LA_PRINT_TYPE (SYMBOL_TYPE (symbol), SYMBOL_SOURCE_NAME (symbol),
+			 outfile,
+			 TYPE_CODE (SYMBOL_TYPE (symbol)) != TYPE_CODE_ENUM,
+			 depth);
+	  fprintf_filtered (outfile, "; ");
+	}
+      else
+	fprintf_filtered (outfile, "%s ", SYMBOL_SOURCE_NAME (symbol));
+
+      switch (SYMBOL_CLASS (symbol))
+	{
+	case LOC_CONST:
+	  fprintf_filtered (outfile, "const %ld (0x%lx)",
+			    SYMBOL_VALUE (symbol),
+			    SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_CONST_BYTES:
+	  {
+	    unsigned i;
+	    struct type *type = check_typedef (SYMBOL_TYPE (symbol));
+	    fprintf_filtered (outfile, "const %u hex bytes:",
+			      TYPE_LENGTH (type));
+	    for (i = 0; i < TYPE_LENGTH (type); i++)
+	      fprintf_filtered (outfile, " %02x",
+				(unsigned)SYMBOL_VALUE_BYTES (symbol) [i]);
+	  }
+	  break;
+
+	case LOC_STATIC:
+	  fprintf_filtered (outfile, "static at ");
+	  print_address_numeric (SYMBOL_VALUE_ADDRESS (symbol), 1,outfile);
+	  if (SYMBOL_BFD_SECTION (symbol))
+	    fprintf_filtered (outfile, " section %s",
+			      bfd_section_name
+			      (SYMBOL_BFD_SECTION (symbol)->owner,
+			       SYMBOL_BFD_SECTION (symbol)));
+	  break;
+
+	case LOC_INDIRECT:
+	  fprintf_filtered (outfile, "extern global at *(");
+	  print_address_numeric (SYMBOL_VALUE_ADDRESS (symbol), 1,outfile);
+	  fprintf_filtered (outfile, "),");
+	  break;
+
+	case LOC_REGISTER:
+	  fprintf_filtered (outfile, "register %ld", SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_ARG:
+	  fprintf_filtered (outfile, "arg at offset 0x%lx",
+			    SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_LOCAL_ARG:
+	  fprintf_filtered (outfile, "arg at offset 0x%lx from fp",
+		   SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_REF_ARG:
+	  fprintf_filtered (outfile, "reference arg at 0x%lx", SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_REGPARM:
+	  fprintf_filtered (outfile, "parameter register %ld", SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_REGPARM_ADDR:
+	  fprintf_filtered (outfile, "address parameter register %ld", SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_LOCAL:
+	  fprintf_filtered (outfile, "local at offset 0x%lx",
+			    SYMBOL_VALUE (symbol));
+	  break;
+
+	case LOC_BASEREG:
+	  fprintf_filtered (outfile, "local at 0x%lx from register %d",
+		   SYMBOL_VALUE (symbol), SYMBOL_BASEREG (symbol));
+	  break;
+
+	case LOC_BASEREG_ARG:
+	  fprintf_filtered (outfile, "arg at 0x%lx from register %d",
+		   SYMBOL_VALUE (symbol), SYMBOL_BASEREG (symbol));
+	  break;
+
+	case LOC_TYPEDEF:
+	  break;
+
+	case LOC_LABEL:
+	  fprintf_filtered (outfile, "label at ");
+	  print_address_numeric (SYMBOL_VALUE_ADDRESS (symbol), 1, outfile);
+	  if (SYMBOL_BFD_SECTION (symbol))
+	    fprintf_filtered (outfile, " section %s",
+			      bfd_section_name
+			      (SYMBOL_BFD_SECTION (symbol)->owner,
+			       SYMBOL_BFD_SECTION (symbol)));
+	  break;
+
+	case LOC_BLOCK:
+	  fprintf_filtered (outfile, "block object ");
+	  gdb_print_address (SYMBOL_BLOCK_VALUE (symbol), outfile);
+	  fprintf_filtered (outfile, ", ");
+	  print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (symbol)),
+				 1,
+				 outfile);
+	  fprintf_filtered (outfile, "..");
+	  print_address_numeric (BLOCK_END (SYMBOL_BLOCK_VALUE (symbol)),
+				 1,
+				 outfile);
+	  if (SYMBOL_BFD_SECTION (symbol))
+	    fprintf_filtered (outfile, " section %s",
+			      bfd_section_name
+			      (SYMBOL_BFD_SECTION (symbol)->owner,
+			       SYMBOL_BFD_SECTION (symbol)));
+	  break;
+
+	case LOC_UNRESOLVED:
+	  fprintf_filtered (outfile, "unresolved");
+	  break;
+
+	case LOC_OPTIMIZED_OUT:
+	  fprintf_filtered (outfile, "optimized out");
+	  break;
+
+        default:
+	  fprintf_filtered (outfile, "botched symbol class %x",
+			    SYMBOL_CLASS (symbol));
+	  break;
+	}
+    }
+  fprintf_filtered (outfile, "\n");
+  return 1;
+}
+
+void
+maintenance_print_psymbols (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  GDB_FILE  *outfile;
+  struct cleanup *cleanups;
+  char *symname = NULL;
+  char *filename = DEV_TTY;
+  struct objfile *objfile;
+  struct partial_symtab *ps;
+
+  dont_repeat ();
+
+  if (args == NULL)
+    {
+      error ("print-psymbols takes an output file name and optional symbol file name");
+    }
+  else if ((argv = buildargv (args)) == NULL)
+    {
+      nomem (0);
+    }
+  cleanups = make_cleanup ((make_cleanup_func) freeargv, (char *) argv);
+
+  if (argv[0] != NULL)
+    {
+      filename = argv[0];
+      /* If a second arg is supplied, it is a source file name to match on */
+      if (argv[1] != NULL)
+	{
+	  symname = argv[1];
+	}
+    }
+
+  filename = tilde_expand (filename);
+  make_cleanup (free, filename);
+  
+  outfile = gdb_fopen (filename, FOPEN_WT);
+  if (outfile == 0)
+    perror_with_name (filename);
+  make_cleanup ((make_cleanup_func) gdb_fclose, &outfile);
+
+  immediate_quit++;
+  ALL_PSYMTABS (objfile, ps)
+    if (symname == NULL || (STREQ (symname, ps -> filename)))
+      dump_psymtab (objfile, ps, outfile);
+  immediate_quit--;
+  do_cleanups (cleanups);
+}
+
+static void
+print_partial_symbols (p, count, what, outfile)
+     struct partial_symbol **p;
+     int count;
+     char *what;
+     GDB_FILE *outfile;
+{
+  fprintf_filtered (outfile, "  %s partial symbols:\n", what);
+  while (count-- > 0)
+    {
+      fprintf_filtered (outfile, "    `%s'", SYMBOL_NAME(*p));
+      if (SYMBOL_DEMANGLED_NAME (*p) != NULL)
+	{
+	  fprintf_filtered (outfile, "  `%s'", SYMBOL_DEMANGLED_NAME (*p));
+	}
+      fputs_filtered (", ", outfile);
+      switch (SYMBOL_NAMESPACE (*p))
+	{
+	case UNDEF_NAMESPACE:
+	  fputs_filtered ("undefined namespace, ", outfile);
+	  break;
+	case VAR_NAMESPACE:
+	  /* This is the usual thing -- don't print it */
+	  break;
+	case STRUCT_NAMESPACE:
+	  fputs_filtered ("struct namespace, ", outfile);
+	  break;
+	case LABEL_NAMESPACE:
+	  fputs_filtered ("label namespace, ", outfile);
+	  break;
+	default:
+	  fputs_filtered ("<invalid namespace>, ", outfile);
+	  break;
+	}
+      switch (SYMBOL_CLASS (*p))
+	{
+	case LOC_UNDEF:
+	  fputs_filtered ("undefined", outfile);
+	  break;
+	case LOC_CONST:
+	  fputs_filtered ("constant int", outfile);
+	  break;
+	case LOC_STATIC:
+	  fputs_filtered ("static", outfile);
+	  break;
+	case LOC_INDIRECT:
+	  fputs_filtered ("extern global", outfile);
+	  break;
+	case LOC_REGISTER:
+	  fputs_filtered ("register", outfile);
+	  break;
+	case LOC_ARG:
+	  fputs_filtered ("pass by value", outfile);
+	  break;
+	case LOC_REF_ARG:
+	  fputs_filtered ("pass by reference", outfile);
+	  break;
+	case LOC_REGPARM:
+	  fputs_filtered ("register parameter", outfile);
+	  break;
+	case LOC_REGPARM_ADDR:
+	  fputs_filtered ("register address parameter", outfile);
+	  break;
+	case LOC_LOCAL:
+	  fputs_filtered ("stack parameter", outfile);
+	  break;
+	case LOC_TYPEDEF:
+	  fputs_filtered ("type", outfile);
+	  break;
+	case LOC_LABEL:
+	  fputs_filtered ("label", outfile);
+	  break;
+	case LOC_BLOCK:
+	  fputs_filtered ("function", outfile);
+	  break;
+	case LOC_CONST_BYTES:
+	  fputs_filtered ("constant bytes", outfile);
+	  break;
+	case LOC_LOCAL_ARG:
+	  fputs_filtered ("shuffled arg", outfile);
+	  break;
+	case LOC_UNRESOLVED:
+	  fputs_filtered ("unresolved", outfile);
+	  break;
+	case LOC_OPTIMIZED_OUT:
+	  fputs_filtered ("optimized out", outfile);
+	  break;
+	default:
+	  fputs_filtered ("<invalid location>", outfile);
+	  break;
+	}
+      fputs_filtered (", ", outfile);
+      print_address_numeric (SYMBOL_VALUE_ADDRESS (*p), 1, outfile);
+      fprintf_filtered (outfile, "\n");
+      p++;
+    }
+}
+
+void
+maintenance_print_msymbols (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  char **argv;
+  GDB_FILE *outfile;
+  struct cleanup *cleanups;
+  char *filename = DEV_TTY;
+  char *symname = NULL;
+  struct objfile *objfile;
+
+  dont_repeat ();
+
+  if (args == NULL)
+    {
+      error ("print-msymbols takes an output file name and optional symbol file name");
+    }
+  else if ((argv = buildargv (args)) == NULL)
+    {
+      nomem (0);
+    }
+  cleanups = make_cleanup ((make_cleanup_func) freeargv, argv);
+
+  if (argv[0] != NULL)
+    {
+      filename = argv[0];
+      /* If a second arg is supplied, it is a source file name to match on */
+      if (argv[1] != NULL)
+	{
+	  symname = argv[1];
+	}
+    }
+
+  filename = tilde_expand (filename);
+  make_cleanup (free, filename);
+  
+  outfile = gdb_fopen (filename, FOPEN_WT);
+  if (outfile == 0)
+    perror_with_name (filename);
+  make_cleanup ((make_cleanup_func) gdb_fclose, &outfile);
+
+  immediate_quit++;
+  ALL_OBJFILES (objfile)
+    if (symname == NULL || (STREQ (symname, objfile -> name)))
+      dump_msymbols (objfile, outfile);
+  immediate_quit--;
+  fprintf_filtered (outfile, "\n\n");
+  do_cleanups (cleanups);
+}
+
+void
+maintenance_print_objfiles (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  struct objfile *objfile;
+
+  dont_repeat ();
+
+  immediate_quit++;
+  ALL_OBJFILES (objfile)
+    dump_objfile (objfile);
+  immediate_quit--;
+}
+
+/* Check consistency of psymtabs and symtabs.  */
+
+void
+maintenance_check_symtabs (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct symbol *sym;
+  register struct partial_symbol **psym;
+  register struct symtab *s = NULL;
+  register struct partial_symtab *ps;
+  struct blockvector *bv;
+  register struct objfile *objfile;
+  register struct block *b;
+  int length;
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      s = PSYMTAB_TO_SYMTAB(ps);
+      if (s == NULL)
+	continue;
+      bv = BLOCKVECTOR (s);
+      b = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+      psym = ps->objfile->static_psymbols.list + ps->statics_offset;
+      length = ps->n_static_syms;
+      while (length--)
+	{
+	  sym = lookup_block_symbol (b, SYMBOL_NAME (*psym),
+				     SYMBOL_NAMESPACE (*psym));
+	  if (!sym)
+	    {
+	      printf_filtered ("Static symbol `");
+	      puts_filtered (SYMBOL_NAME (*psym));
+	      printf_filtered ("' only found in ");
+	      puts_filtered (ps->filename);
+	      printf_filtered (" psymtab\n");
+	    }
+	  psym++;
+	}
+      b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+      psym = ps->objfile->global_psymbols.list + ps->globals_offset;
+      length = ps->n_global_syms;
+      while (length--)
+	{
+	  sym = lookup_block_symbol (b, SYMBOL_NAME (*psym),
+				     SYMBOL_NAMESPACE (*psym));
+	  if (!sym)
+	    {
+	      printf_filtered ("Global symbol `");
+	      puts_filtered (SYMBOL_NAME (*psym));
+	      printf_filtered ("' only found in ");
+	      puts_filtered (ps->filename);
+	      printf_filtered (" psymtab\n");
+	    }
+	  psym++;
+	}
+      if (ps->texthigh < ps->textlow)
+	{
+	  printf_filtered ("Psymtab ");
+	  puts_filtered (ps->filename);
+	  printf_filtered (" covers bad range ");
+          print_address_numeric (ps->textlow, 1, gdb_stdout);
+	  printf_filtered (" - ");
+          print_address_numeric (ps->texthigh, 1, gdb_stdout);
+	  printf_filtered ("\n");
+	  continue;
+	}
+      if (ps->texthigh == 0)
+	continue;
+      if (ps->textlow < BLOCK_START (b) || ps->texthigh > BLOCK_END (b))
+	{
+	  printf_filtered ("Psymtab ");
+	  puts_filtered (ps->filename);
+	  printf_filtered (" covers ");
+          print_address_numeric (ps->textlow, 1, gdb_stdout);
+	  printf_filtered (" - ");
+          print_address_numeric (ps->texthigh, 1, gdb_stdout);
+	  printf_filtered (" but symtab covers only ");
+          print_address_numeric (BLOCK_START (b), 1, gdb_stdout);
+	  printf_filtered (" - ");
+          print_address_numeric (BLOCK_END (b), 1, gdb_stdout);
+	  printf_filtered ("\n");
+	}
+    }
+}
+
+
+/* Return the nexting depth of a block within other blocks in its symtab.  */
+
+static int
+block_depth (block)
+     struct block *block;
+{
+  register int i = 0;
+  while ((block = BLOCK_SUPERBLOCK (block)) != NULL) 
+    {
+      i++;
+    }
+  return i;
+}
+
+#endif	/* MAINTENANCE_CMDS */
+
+
+/* Increase the space allocated for LISTP, which is probably
+   global_psymbols or static_psymbols. This space will eventually
+   be freed in free_objfile().  */
+
+void
+extend_psymbol_list (listp, objfile)
+     register struct psymbol_allocation_list *listp;
+     struct objfile *objfile;
+{
+  int new_size;
+  if (listp->size == 0)
+    {
+      new_size = 255;
+      listp->list = (struct partial_symbol **)
+	xmmalloc (objfile -> md, new_size * sizeof (struct partial_symbol *));
+    }
+  else
+    {
+      new_size = listp->size * 2;
+      listp->list = (struct partial_symbol **)
+	xmrealloc (objfile -> md, (char *) listp->list,
+		   new_size * sizeof (struct partial_symbol *));
+    }
+  /* Next assumes we only went one over.  Should be good if
+     program works correctly */
+  listp->next = listp->list + listp->size;
+  listp->size = new_size;
+}
+
+
+/* Do early runtime initializations. */
+void
+_initialize_symmisc ()
+{
+  std_in  = stdin;
+  std_out = stdout;
+  std_err = stderr;
+}
diff --git a/gdb/symtab.c b/gdb/symtab.c
new file mode 100644
index 0000000..fb3c8f7
--- /dev/null
+++ b/gdb/symtab.c
@@ -0,0 +1,4518 @@
+/* Symbol table lookup for the GNU debugger, GDB.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "target.h"
+#include "value.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdbcmd.h"
+#include "call-cmds.h"
+#include "gnu-regex.h"
+#include "expression.h"
+#include "language.h"
+#include "demangle.h"
+#include "inferior.h"
+
+#include "obstack.h"
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+
+/* Prototype for one function in parser-defs.h,
+   instead of including that entire file. */
+
+extern char * find_template_name_end PARAMS ((char *));
+
+/* Prototypes for local functions */
+
+static int find_methods PARAMS ((struct type *, char *, struct symbol **));
+
+static void completion_list_add_name PARAMS ((char *, char *, int, char *, 
+                                              char *));
+
+static void build_canonical_line_spec PARAMS ((struct symtab_and_line *, 
+                                               char *, char ***));
+
+static struct symtabs_and_lines decode_line_2 PARAMS ((struct symbol *[], 
+                                                       int, int, char ***));
+
+static void rbreak_command PARAMS ((char *, int));
+
+static void types_info PARAMS ((char *, int));
+
+static void functions_info PARAMS ((char *, int));
+
+static void variables_info PARAMS ((char *, int));
+
+static void sources_info PARAMS ((char *, int));
+
+static void output_source_filename PARAMS ((char *, int *));
+
+char *operator_chars PARAMS ((char *, char **));
+
+static int find_line_common PARAMS ((struct linetable *, int, int *));
+
+static struct partial_symbol *lookup_partial_symbol PARAMS 
+                                  ((struct partial_symtab *, const char *,
+			            int, namespace_enum));
+
+static struct partial_symbol *fixup_psymbol_section PARAMS ((struct 
+                                        partial_symbol *, struct objfile *));
+
+static struct symtab *lookup_symtab_1 PARAMS ((char *));
+
+static void cplusplus_hint PARAMS ((char *));
+
+static struct symbol *find_active_alias PARAMS ((struct symbol *sym, 
+                                                 CORE_ADDR addr));
+
+/* This flag is used in hppa-tdep.c, and set in hp-symtab-read.c */
+/* Signals the presence of objects compiled by HP compilers */
+int hp_som_som_object_present = 0;
+
+static void fixup_section PARAMS ((struct general_symbol_info *, 
+                                   struct objfile *));
+
+static int file_matches PARAMS ((char *, char **, int));
+
+static void print_symbol_info PARAMS ((namespace_enum, 
+                                       struct symtab *, struct symbol *, 
+                                       int, char *));
+
+static void print_msymbol_info PARAMS ((struct minimal_symbol *));
+
+static void symtab_symbol_info PARAMS ((char *, namespace_enum, int));
+
+void _initialize_symtab PARAMS ((void));
+
+/* */
+
+/* The single non-language-specific builtin type */
+struct type *builtin_type_error;
+
+/* Block in which the most recently searched-for symbol was found.
+   Might be better to make this a parameter to lookup_symbol and 
+   value_of_this. */
+
+const struct block *block_found;
+
+char no_symtab_msg[] = "No symbol table is loaded.  Use the \"file\" command.";
+
+/* While the C++ support is still in flux, issue a possibly helpful hint on
+   using the new command completion feature on single quoted demangled C++
+   symbols.  Remove when loose ends are cleaned up.   FIXME -fnf */
+
+static void
+cplusplus_hint (name)
+     char *name;
+{
+  while (*name == '\'')
+    name++;
+  printf_filtered ("Hint: try '%s<TAB> or '%s<ESC-?>\n", name, name);
+  printf_filtered ("(Note leading single quote.)\n");
+}
+
+/* Check for a symtab of a specific name; first in symtabs, then in
+   psymtabs.  *If* there is no '/' in the name, a match after a '/'
+   in the symtab filename will also work.  */
+
+static struct symtab *
+lookup_symtab_1 (name)
+     char *name;
+{
+  register struct symtab *s;
+  register struct partial_symtab *ps;
+  register char *slash;
+  register struct objfile *objfile;
+
+ got_symtab:
+
+  /* First, search for an exact match */
+
+  ALL_SYMTABS (objfile, s)
+    if (STREQ (name, s->filename))
+      return s;
+
+  slash = strchr (name, '/');
+
+  /* Now, search for a matching tail (only if name doesn't have any dirs) */
+
+  if (!slash)
+    ALL_SYMTABS (objfile, s)
+      {
+	char *p = s -> filename;
+	char *tail = strrchr (p, '/');
+
+	if (tail)
+	  p = tail + 1;
+
+	if (STREQ (p, name))
+	  return s;
+      }
+
+  /* Same search rules as above apply here, but now we look thru the
+     psymtabs.  */
+
+  ps = lookup_partial_symtab (name);
+  if (!ps)
+    return (NULL);
+
+  if (ps -> readin)
+    error ("Internal: readin %s pst for `%s' found when no symtab found.",
+	   ps -> filename, name);
+
+  s = PSYMTAB_TO_SYMTAB (ps);
+
+  if (s)
+    return s;
+
+  /* At this point, we have located the psymtab for this file, but
+     the conversion to a symtab has failed.  This usually happens
+     when we are looking up an include file.  In this case,
+     PSYMTAB_TO_SYMTAB doesn't return a symtab, even though one has
+     been created.  So, we need to run through the symtabs again in
+     order to find the file.
+     XXX - This is a crock, and should be fixed inside of the the
+     symbol parsing routines. */
+  goto got_symtab;
+}
+
+/* Lookup the symbol table of a source file named NAME.  Try a couple
+   of variations if the first lookup doesn't work.  */
+
+struct symtab *
+lookup_symtab (name)
+     char *name;
+{
+  register struct symtab *s;
+#if 0
+  register char *copy;
+#endif
+
+  s = lookup_symtab_1 (name);
+  if (s) return s;
+
+#if 0
+  /* This screws c-exp.y:yylex if there is both a type "tree" and a symtab
+     "tree.c".  */
+
+  /* If name not found as specified, see if adding ".c" helps.  */
+  /* Why is this?  Is it just a user convenience?  (If so, it's pretty
+     questionable in the presence of C++, FORTRAN, etc.).  It's not in
+     the GDB manual.  */
+
+  copy = (char *) alloca (strlen (name) + 3);
+  strcpy (copy, name);
+  strcat (copy, ".c");
+  s = lookup_symtab_1 (copy);
+  if (s) return s;
+#endif /* 0 */
+
+  /* We didn't find anything; die.  */
+  return 0;
+}
+
+/* Lookup the partial symbol table of a source file named NAME.
+   *If* there is no '/' in the name, a match after a '/'
+   in the psymtab filename will also work.  */
+
+struct partial_symtab *
+lookup_partial_symtab (name)
+char *name;
+{
+  register struct partial_symtab *pst;
+  register struct objfile *objfile;
+  
+  ALL_PSYMTABS (objfile, pst)
+    {
+      if (STREQ (name, pst -> filename))
+	{
+	  return (pst);
+	}
+    }
+
+  /* Now, search for a matching tail (only if name doesn't have any dirs) */
+
+  if (!strchr (name, '/'))
+    ALL_PSYMTABS (objfile, pst)
+      {
+	char *p = pst -> filename;
+	char *tail = strrchr (p, '/');
+
+	if (tail)
+	  p = tail + 1;
+
+	if (STREQ (p, name))
+	  return (pst);
+      }
+
+  return (NULL);
+}
+
+/* Mangle a GDB method stub type.  This actually reassembles the pieces of the
+   full method name, which consist of the class name (from T), the unadorned
+   method name from METHOD_ID, and the signature for the specific overload,
+   specified by SIGNATURE_ID.  Note that this function is g++ specific. */
+
+char *
+gdb_mangle_name (type, method_id, signature_id)
+     struct type *type;
+     int method_id, signature_id;
+{
+  int mangled_name_len;
+  char *mangled_name;
+  struct fn_field *f = TYPE_FN_FIELDLIST1 (type, method_id);
+  struct fn_field *method = &f[signature_id];
+  char *field_name = TYPE_FN_FIELDLIST_NAME (type, method_id);
+  char *physname = TYPE_FN_FIELD_PHYSNAME (f, signature_id);
+  char *newname = type_name_no_tag (type);
+
+  /* Does the form of physname indicate that it is the full mangled name
+     of a constructor (not just the args)?  */
+  int is_full_physname_constructor;
+
+  int is_constructor;
+  int is_destructor = DESTRUCTOR_PREFIX_P (physname);
+  /* Need a new type prefix.  */
+  char *const_prefix = method->is_const ? "C" : "";
+  char *volatile_prefix = method->is_volatile ? "V" : "";
+  char buf[20];
+  int len = (newname == NULL ? 0 : strlen (newname));
+
+  is_full_physname_constructor = 
+    ((physname[0]=='_' && physname[1]=='_' && 
+      (isdigit(physname[2]) || physname[2]=='Q' || physname[2]=='t'))
+     || (strncmp(physname, "__ct", 4) == 0));
+
+  is_constructor =
+    is_full_physname_constructor || (newname && STREQ(field_name, newname));
+
+  if (!is_destructor)
+    is_destructor = (strncmp(physname, "__dt", 4) == 0); 
+
+  if (is_destructor || is_full_physname_constructor)
+    {
+      mangled_name = (char*) xmalloc(strlen(physname)+1);
+      strcpy(mangled_name, physname);
+      return mangled_name;
+    }
+
+  if (len == 0)
+    {
+      sprintf (buf, "__%s%s", const_prefix, volatile_prefix);
+    }
+  else if (physname[0] == 't' || physname[0] == 'Q')
+    {
+      /* The physname for template and qualified methods already includes
+	 the class name.  */
+      sprintf (buf, "__%s%s", const_prefix, volatile_prefix);
+      newname = NULL;
+      len = 0;
+    }
+  else
+    {
+      sprintf (buf, "__%s%s%d", const_prefix, volatile_prefix, len);
+    }
+  mangled_name_len = ((is_constructor ? 0 : strlen (field_name))
+			  + strlen (buf) + len
+			  + strlen (physname)
+			  + 1);
+
+  /* Only needed for GNU-mangled names.  ANSI-mangled names
+     work with the normal mechanisms.  */
+  if (OPNAME_PREFIX_P (field_name))
+    {
+      const char *opname = cplus_mangle_opname (field_name + 3, 0);
+      if (opname == NULL)
+	error ("No mangling for \"%s\"", field_name);
+      mangled_name_len += strlen (opname);
+      mangled_name = (char *)xmalloc (mangled_name_len);
+
+      strncpy (mangled_name, field_name, 3);
+      mangled_name[3] = '\0';
+      strcat (mangled_name, opname);
+    }
+  else
+    {
+      mangled_name = (char *)xmalloc (mangled_name_len);
+      if (is_constructor)
+	mangled_name[0] = '\0';
+      else
+	strcpy (mangled_name, field_name);
+    }
+  strcat (mangled_name, buf);
+  /* If the class doesn't have a name, i.e. newname NULL, then we just
+     mangle it using 0 for the length of the class.  Thus it gets mangled
+     as something starting with `::' rather than `classname::'. */ 
+  if (newname != NULL)
+    strcat (mangled_name, newname);
+
+  strcat (mangled_name, physname);
+  return (mangled_name);
+}
+
+
+
+/* Find which partial symtab on contains PC and SECTION.  Return 0 if none.  */
+
+struct partial_symtab *
+find_pc_sect_psymtab (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  register struct partial_symtab *pst;
+  register struct objfile *objfile;
+
+  ALL_PSYMTABS (objfile, pst)
+    {
+#if defined(HPUXHPPA)
+      if (pc >= pst->textlow && pc <= pst->texthigh)
+#else
+      if (pc >= pst->textlow && pc < pst->texthigh)
+#endif
+	{
+	  struct minimal_symbol *msymbol;
+	  struct partial_symtab *tpst;
+
+	  /* An objfile that has its functions reordered might have
+	     many partial symbol tables containing the PC, but
+	     we want the partial symbol table that contains the
+	     function containing the PC.  */
+	  if (!(objfile->flags & OBJF_REORDERED) &&
+	      section == 0)	/* can't validate section this way */
+	    return (pst);
+
+	  msymbol = lookup_minimal_symbol_by_pc_section (pc, section);
+	  if (msymbol == NULL)
+	    return (pst);
+
+	  for (tpst = pst; tpst != NULL; tpst = tpst->next)
+	    {
+#if defined(HPUXHPPA)
+	      if (pc >= tpst->textlow && pc <= tpst->texthigh)
+#else
+	      if (pc >= tpst->textlow && pc < tpst->texthigh)
+#endif
+		{
+		  struct partial_symbol *p;
+
+		  p = find_pc_sect_psymbol (tpst, pc, section);
+		  if (p != NULL
+		      && SYMBOL_VALUE_ADDRESS(p)
+			 == SYMBOL_VALUE_ADDRESS (msymbol))
+		    return (tpst);
+		}
+	    }
+	  return (pst);
+	}
+    }
+  return (NULL);
+}
+
+/* Find which partial symtab contains PC.  Return 0 if none. 
+   Backward compatibility, no section */
+
+struct partial_symtab *
+find_pc_psymtab (pc)
+     CORE_ADDR pc;
+{
+  return find_pc_sect_psymtab (pc, find_pc_mapped_section (pc));
+}
+
+/* Find which partial symbol within a psymtab matches PC and SECTION.  
+   Return 0 if none.  Check all psymtabs if PSYMTAB is 0.  */
+
+struct partial_symbol *
+find_pc_sect_psymbol (psymtab, pc, section)
+     struct partial_symtab *psymtab;
+     CORE_ADDR pc;
+     asection *section;
+{
+  struct partial_symbol *best = NULL, *p, **pp;
+  CORE_ADDR best_pc;
+  
+  if (!psymtab)
+    psymtab = find_pc_sect_psymtab (pc, section);
+  if (!psymtab)
+    return 0;
+
+  /* Cope with programs that start at address 0 */
+  best_pc = (psymtab->textlow != 0) ? psymtab->textlow - 1 : 0;
+
+  /* Search the global symbols as well as the static symbols, so that
+     find_pc_partial_function doesn't use a minimal symbol and thus
+     cache a bad endaddr.  */
+  for (pp = psymtab->objfile->global_psymbols.list + psymtab->globals_offset;
+       (pp - (psymtab->objfile->global_psymbols.list + psymtab->globals_offset)
+	< psymtab->n_global_syms);
+       pp++)
+    {
+      p = *pp;
+      if (SYMBOL_NAMESPACE (p) == VAR_NAMESPACE
+	  && SYMBOL_CLASS (p) == LOC_BLOCK
+	  && pc >= SYMBOL_VALUE_ADDRESS (p)
+	  && (SYMBOL_VALUE_ADDRESS (p) > best_pc
+	      || (psymtab->textlow == 0
+		  && best_pc == 0 && SYMBOL_VALUE_ADDRESS (p) == 0)))
+	{
+	  if (section)	/* match on a specific section */
+	    {
+	      fixup_psymbol_section (p, psymtab->objfile);
+	      if (SYMBOL_BFD_SECTION (p) != section)
+		continue;
+	    }
+	  best_pc = SYMBOL_VALUE_ADDRESS (p);
+	  best = p;
+	}
+    }
+
+  for (pp = psymtab->objfile->static_psymbols.list + psymtab->statics_offset;
+       (pp - (psymtab->objfile->static_psymbols.list + psymtab->statics_offset)
+	< psymtab->n_static_syms);
+       pp++)
+    {
+      p = *pp;
+      if (SYMBOL_NAMESPACE (p) == VAR_NAMESPACE
+	  && SYMBOL_CLASS (p) == LOC_BLOCK
+	  && pc >= SYMBOL_VALUE_ADDRESS (p)
+	  && (SYMBOL_VALUE_ADDRESS (p) > best_pc
+	      || (psymtab->textlow == 0 
+		  && best_pc == 0 && SYMBOL_VALUE_ADDRESS (p) == 0)))
+	{
+	  if (section)	/* match on a specific section */
+	    {
+	      fixup_psymbol_section (p, psymtab->objfile);
+	      if (SYMBOL_BFD_SECTION (p) != section)
+		continue;
+	    }
+	  best_pc = SYMBOL_VALUE_ADDRESS (p);
+	  best = p;
+	}
+    }
+
+  return best;
+}
+
+/* Find which partial symbol within a psymtab matches PC.  Return 0 if none.  
+   Check all psymtabs if PSYMTAB is 0.  Backwards compatibility, no section. */
+
+struct partial_symbol *
+find_pc_psymbol (psymtab, pc)
+     struct partial_symtab *psymtab;
+     CORE_ADDR pc;
+{
+  return find_pc_sect_psymbol (psymtab, pc, find_pc_mapped_section (pc));
+}
+
+/* Debug symbols usually don't have section information.  We need to dig that
+   out of the minimal symbols and stash that in the debug symbol.  */
+
+static void
+fixup_section (ginfo, objfile)
+     struct general_symbol_info *ginfo;
+     struct objfile *objfile;
+{
+  struct minimal_symbol *msym;
+  msym = lookup_minimal_symbol (ginfo->name, NULL, objfile);
+
+  if (msym)
+    ginfo->bfd_section = SYMBOL_BFD_SECTION (msym);
+}
+
+struct symbol *
+fixup_symbol_section (sym, objfile)
+     struct symbol *sym;
+     struct objfile *objfile;
+{
+  if (!sym)
+    return NULL;
+
+  if (SYMBOL_BFD_SECTION (sym))
+    return sym;
+
+  fixup_section (&sym->ginfo, objfile);
+
+  return sym;
+}
+
+static struct partial_symbol *
+fixup_psymbol_section (psym, objfile)
+     struct partial_symbol *psym;
+     struct objfile *objfile;
+{
+  if (!psym)
+    return NULL;
+
+  if (SYMBOL_BFD_SECTION (psym))
+    return psym;
+
+  fixup_section (&psym->ginfo, objfile);
+
+  return psym;
+}
+
+/* Find the definition for a specified symbol name NAME
+   in namespace NAMESPACE, visible from lexical block BLOCK.
+   Returns the struct symbol pointer, or zero if no symbol is found.
+   If SYMTAB is non-NULL, store the symbol table in which the
+   symbol was found there, or NULL if not found.
+   C++: if IS_A_FIELD_OF_THIS is nonzero on entry, check to see if
+   NAME is a field of the current implied argument `this'.  If so set
+   *IS_A_FIELD_OF_THIS to 1, otherwise set it to zero. 
+   BLOCK_FOUND is set to the block in which NAME is found (in the case of
+   a field of `this', value_of_this sets BLOCK_FOUND to the proper value.) */
+
+/* This function has a bunch of loops in it and it would seem to be
+   attractive to put in some QUIT's (though I'm not really sure
+   whether it can run long enough to be really important).  But there
+   are a few calls for which it would appear to be bad news to quit
+   out of here: find_proc_desc in alpha-tdep.c and mips-tdep.c, and
+   nindy_frame_chain_valid in nindy-tdep.c.  (Note that there is C++
+   code below which can error(), but that probably doesn't affect
+   these calls since they are looking for a known variable and thus
+   can probably assume it will never hit the C++ code).  */
+
+struct symbol *
+lookup_symbol (name, block, namespace, is_a_field_of_this, symtab)
+     const char *name;
+     register const struct block *block;
+     const namespace_enum namespace;
+     int *is_a_field_of_this;
+     struct symtab **symtab;
+{
+  register struct symbol *sym;
+  register struct symtab *s = NULL;
+  register struct partial_symtab *ps;
+  struct blockvector *bv;
+  register struct objfile *objfile = NULL;
+  register struct block *b;
+  register struct minimal_symbol *msymbol;
+
+  /* Search specified block and its superiors.  */
+
+  while (block != 0)
+    {
+      sym = lookup_block_symbol (block, name, namespace);
+      if (sym) 
+	{
+	  block_found = block;
+	  if (symtab != NULL)
+	    {
+	      /* Search the list of symtabs for one which contains the
+		 address of the start of this block.  */
+	      ALL_SYMTABS (objfile, s)
+		{
+		  bv = BLOCKVECTOR (s);
+		  b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+		  if (BLOCK_START (b) <= BLOCK_START (block)
+		      && BLOCK_END (b) > BLOCK_START (block))
+		    goto found;
+		}
+found:
+	      *symtab = s;
+	    }
+
+	  return fixup_symbol_section (sym, objfile);
+	}
+      block = BLOCK_SUPERBLOCK (block);
+    }
+
+  /* FIXME: this code is never executed--block is always NULL at this
+     point.  What is it trying to do, anyway?  We already should have
+     checked the STATIC_BLOCK above (it is the superblock of top-level
+     blocks).  Why is VAR_NAMESPACE special-cased?  */
+  /* Don't need to mess with the psymtabs; if we have a block,
+     that file is read in.  If we don't, then we deal later with
+     all the psymtab stuff that needs checking.  */
+  /* Note (RT): The following never-executed code looks unnecessary to me also.
+   * If we change the code to use the original (passed-in)
+   * value of 'block', we could cause it to execute, but then what
+   * would it do? The STATIC_BLOCK of the symtab containing the passed-in
+   * 'block' was already searched by the above code. And the STATIC_BLOCK's
+   * of *other* symtabs (those files not containing 'block' lexically)
+   * should not contain 'block' address-wise. So we wouldn't expect this
+   * code to find any 'sym''s that were not found above. I vote for 
+   * deleting the following paragraph of code.
+   */
+  if (namespace == VAR_NAMESPACE && block != NULL)
+    {
+      struct block *b;
+      /* Find the right symtab.  */
+      ALL_SYMTABS (objfile, s)
+	{
+	  bv = BLOCKVECTOR (s);
+	  b = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	  if (BLOCK_START (b) <= BLOCK_START (block)
+	      && BLOCK_END (b) > BLOCK_START (block))
+	    {
+	      sym = lookup_block_symbol (b, name, VAR_NAMESPACE);
+	      if (sym)
+		{
+		  block_found = b;
+		  if (symtab != NULL)
+		    *symtab = s;
+		  return fixup_symbol_section (sym, objfile);
+		}
+	    }
+	}
+    }
+
+
+  /* C++: If requested to do so by the caller, 
+     check to see if NAME is a field of `this'. */
+  if (is_a_field_of_this)
+    {
+      struct value *v = value_of_this (0);
+      
+      *is_a_field_of_this = 0;
+      if (v && check_field (v, name))
+	{
+	  *is_a_field_of_this = 1;
+	  if (symtab != NULL)
+	    *symtab = NULL;
+	  return NULL;
+	}
+    }
+
+  /* Now search all global blocks.  Do the symtab's first, then
+     check the psymtab's. If a psymtab indicates the existence
+     of the desired name as a global, then do psymtab-to-symtab
+     conversion on the fly and return the found symbol. */
+  
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+      sym = lookup_block_symbol (block, name, namespace);
+      if (sym) 
+	{
+	  block_found = block;
+	  if (symtab != NULL)
+	    *symtab = s;
+	  return fixup_symbol_section (sym, objfile);
+	}
+    }
+
+#ifndef HPUXHPPA
+
+  /* Check for the possibility of the symbol being a function or
+     a mangled variable that is stored in one of the minimal symbol tables.
+     Eventually, all global symbols might be resolved in this way.  */
+  
+  if (namespace == VAR_NAMESPACE)
+    {
+      msymbol = lookup_minimal_symbol (name, NULL, NULL);
+      if (msymbol != NULL)
+	{
+	  s = find_pc_sect_symtab (SYMBOL_VALUE_ADDRESS (msymbol),
+				  SYMBOL_BFD_SECTION (msymbol));
+	  if (s != NULL)
+	    {
+	      /* This is a function which has a symtab for its address.  */
+	      bv = BLOCKVECTOR (s);
+	      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	      sym = lookup_block_symbol (block, SYMBOL_NAME (msymbol),
+					 namespace);
+              /* We kept static functions in minimal symbol table as well as
+		 in static scope. We want to find them in the symbol table. */
+		if (!sym) {
+		  block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+		  sym = lookup_block_symbol (block, SYMBOL_NAME (msymbol),
+					     namespace);
+		}
+
+	      /* sym == 0 if symbol was found in the minimal symbol table
+		 but not in the symtab.
+		 Return 0 to use the msymbol definition of "foo_".
+
+		 This happens for Fortran  "foo_" symbols,
+		 which are "foo" in the symtab.
+
+		 This can also happen if "asm" is used to make a
+		 regular symbol but not a debugging symbol, e.g.
+		 asm(".globl _main");
+		 asm("_main:");
+		 */
+
+	      if (symtab != NULL)
+		*symtab = s;
+	      return fixup_symbol_section (sym, objfile);
+	    }
+	  else if (MSYMBOL_TYPE (msymbol) != mst_text
+		   && MSYMBOL_TYPE (msymbol) != mst_file_text
+		   && !STREQ (name, SYMBOL_NAME (msymbol)))
+	    {
+	      /* This is a mangled variable, look it up by its
+		 mangled name.  */
+	      return lookup_symbol (SYMBOL_NAME (msymbol), block, 
+				    namespace, is_a_field_of_this, symtab);
+	    }
+	  /* There are no debug symbols for this file, or we are looking
+	     for an unmangled variable.
+	     Try to find a matching static symbol below. */
+	}
+    }
+      
+#endif
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      if (!ps->readin && lookup_partial_symbol (ps, name, 1, namespace))
+	{
+	  s = PSYMTAB_TO_SYMTAB(ps);
+	  bv = BLOCKVECTOR (s);
+	  block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	  sym = lookup_block_symbol (block, name, namespace);
+	  if (!sym)
+            {
+              /* This shouldn't be necessary, but as a last resort
+               * try looking in the statics even though the psymtab
+               * claimed the symbol was global. It's possible that
+               * the psymtab gets it wrong in some cases.
+               */
+	      block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	      sym = lookup_block_symbol (block, name, namespace);
+              if (!sym)
+	        error ("Internal: global symbol `%s' found in %s psymtab but not in symtab.\n\
+%s may be an inlined function, or may be a template function\n\
+(if a template, try specifying an instantiation: %s<type>).",
+                       name, ps->filename, name, name);
+            }
+	  if (symtab != NULL)
+	    *symtab = s;
+	  return fixup_symbol_section (sym, objfile);
+	}
+    }
+
+  /* Now search all static file-level symbols.
+     Not strictly correct, but more useful than an error.
+     Do the symtabs first, then check the psymtabs.
+     If a psymtab indicates the existence
+     of the desired name as a file-level static, then do psymtab-to-symtab
+     conversion on the fly and return the found symbol. */
+
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+      sym = lookup_block_symbol (block, name, namespace);
+      if (sym) 
+	{
+	  block_found = block;
+	  if (symtab != NULL)
+	    *symtab = s;
+	  return fixup_symbol_section (sym, objfile);
+	}
+    }
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      if (!ps->readin && lookup_partial_symbol (ps, name, 0, namespace))
+	{
+	  s = PSYMTAB_TO_SYMTAB(ps);
+	  bv = BLOCKVECTOR (s);
+	  block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	  sym = lookup_block_symbol (block, name, namespace);
+	  if (!sym)
+            {
+              /* This shouldn't be necessary, but as a last resort
+               * try looking in the globals even though the psymtab
+               * claimed the symbol was static. It's possible that
+               * the psymtab gets it wrong in some cases.
+               */
+	      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	      sym = lookup_block_symbol (block, name, namespace);
+              if (!sym)
+                error ("Internal: static symbol `%s' found in %s psymtab but not in symtab.\n\
+%s may be an inlined function, or may be a template function\n\
+(if a template, try specifying an instantiation: %s<type>).",
+                       name, ps->filename, name, name);
+            }
+	  if (symtab != NULL)
+	    *symtab = s;
+	  return fixup_symbol_section (sym, objfile);
+	}
+    }
+
+#ifdef HPUXHPPA
+
+  /* Check for the possibility of the symbol being a function or
+     a global variable that is stored in one of the minimal symbol tables.
+     The "minimal symbol table" is built from linker-supplied info.
+
+     RT: I moved this check to last, after the complete search of
+     the global (p)symtab's and static (p)symtab's. For HP-generated
+     symbol tables, this check was causing a premature exit from
+     lookup_symbol with NULL return, and thus messing up symbol lookups
+     of things like "c::f". It seems to me a check of the minimal
+     symbol table ought to be a last resort in any case. I'm vaguely
+     worried about the comment below which talks about FORTRAN routines "foo_"
+     though... is it saying we need to do the "minsym" check before
+     the static check in this case? 
+   */
+  
+  if (namespace == VAR_NAMESPACE)
+    {
+      msymbol = lookup_minimal_symbol (name, NULL, NULL);
+      if (msymbol != NULL)
+	{
+          /* OK, we found a minimal symbol in spite of not
+           * finding any symbol. There are various possible
+           * explanations for this. One possibility is the symbol
+           * exists in code not compiled -g. Another possibility
+           * is that the 'psymtab' isn't doing its job.
+           * A third possibility, related to #2, is that we were confused 
+           * by name-mangling. For instance, maybe the psymtab isn't
+           * doing its job because it only know about demangled
+           * names, but we were given a mangled name...
+           */
+
+          /* We first use the address in the msymbol to try to
+           * locate the appropriate symtab. Note that find_pc_symtab()
+           * has a side-effect of doing psymtab-to-symtab expansion,
+           * for the found symtab.
+           */
+	  s = find_pc_symtab (SYMBOL_VALUE_ADDRESS (msymbol));
+	  if (s != NULL)
+	    {
+	      bv = BLOCKVECTOR (s);
+	      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	      sym = lookup_block_symbol (block, SYMBOL_NAME (msymbol),
+					 namespace);
+              /* We kept static functions in minimal symbol table as well as
+		 in static scope. We want to find them in the symbol table. */
+ 	      if (!sym) 
+                {
+		  block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+		  sym = lookup_block_symbol (block, SYMBOL_NAME (msymbol),
+					     namespace);
+		}
+              /* If we found one, return it */
+              if (sym) {
+	        if (symtab != NULL)
+	          *symtab = s;
+	        return sym;
+              }
+
+	      /* If we get here with sym == 0, the symbol was 
+                 found in the minimal symbol table
+		 but not in the symtab.
+		 Fall through and return 0 to use the msymbol 
+                 definition of "foo_".
+                 (Note that outer code generally follows up a call
+                  to this routine with a call to lookup_minimal_symbol(),
+                  so a 0 return means we'll just flow into that other routine).
+
+		 This happens for Fortran  "foo_" symbols,
+		 which are "foo" in the symtab.
+
+		 This can also happen if "asm" is used to make a
+		 regular symbol but not a debugging symbol, e.g.
+		 asm(".globl _main");
+		 asm("_main:");
+		 */
+	    }
+
+          /* If the lookup-by-address fails, try repeating the
+           * entire lookup process with the symbol name from
+           * the msymbol (if different from the original symbol name).
+           */
+	  else if (MSYMBOL_TYPE (msymbol) != mst_text
+		   && MSYMBOL_TYPE (msymbol) != mst_file_text
+		   && !STREQ (name, SYMBOL_NAME (msymbol)))
+	    {
+	      return lookup_symbol (SYMBOL_NAME (msymbol), block,
+				    namespace, is_a_field_of_this, symtab);
+	    }
+	}
+    }
+
+#endif
+
+  if (symtab != NULL)
+    *symtab = NULL;
+  return 0;
+}
+
+/* Look, in partial_symtab PST, for symbol NAME.  Check the global
+   symbols if GLOBAL, the static symbols if not */
+
+static struct partial_symbol *
+lookup_partial_symbol (pst, name, global, namespace)
+     struct partial_symtab *pst;
+     const char *name;
+     int global;
+     namespace_enum namespace;
+{
+  struct partial_symbol **start, **psym;
+  struct partial_symbol **top, **bottom, **center;
+  int length = (global ? pst->n_global_syms : pst->n_static_syms);
+  int do_linear_search = 1;
+
+  if (length == 0)
+    {
+      return (NULL);
+    }
+  
+  start = (global ?
+	   pst->objfile->global_psymbols.list + pst->globals_offset :
+	   pst->objfile->static_psymbols.list + pst->statics_offset  );
+
+  if (global)		/* This means we can use a binary search. */
+    {
+      do_linear_search = 0;
+
+      /* Binary search.  This search is guaranteed to end with center
+         pointing at the earliest partial symbol with the correct
+	 name.  At that point *all* partial symbols with that name
+	 will be checked against the correct namespace. */
+
+      bottom = start;
+      top = start + length - 1;
+      while (top > bottom)
+	{
+	  center = bottom + (top - bottom) / 2;
+	  if (!(center < top))
+	    abort ();
+	  if (!do_linear_search
+	      && (SYMBOL_LANGUAGE (*center) == language_cplus
+		  || SYMBOL_LANGUAGE (*center) == language_java
+		  ))
+	    {
+	      do_linear_search = 1;
+	    }
+	  if (STRCMP (SYMBOL_NAME (*center), name) >= 0)
+	    {
+	      top = center;
+	    }
+	  else
+	    {
+	      bottom = center + 1;
+	    }
+	}
+      if (!(top == bottom))
+	abort ();
+      while (STREQ (SYMBOL_NAME (*top), name))
+	{
+	  if (SYMBOL_NAMESPACE (*top) == namespace)
+	    {
+	      return (*top);
+	    }
+	  top ++;
+	}
+    }
+
+  /* Can't use a binary search or else we found during the binary search that
+     we should also do a linear search. */
+
+  if (do_linear_search)
+    {
+      for (psym = start; psym < start + length; psym++)
+	{
+	  if (namespace == SYMBOL_NAMESPACE (*psym))
+	    {
+	      if (SYMBOL_MATCHES_NAME (*psym, name))
+		{
+		  return (*psym);
+		}
+	    }
+	}
+    }
+
+  return (NULL);
+}
+
+/* Look up a type named NAME in the struct_namespace.  The type returned
+   must not be opaque -- i.e., must have at least one field defined
+
+   This code was modelled on lookup_symbol -- the parts not relevant to looking
+   up types were just left out.  In particular it's assumed here that types
+   are available in struct_namespace and only at file-static or global blocks. */
+
+
+struct type *
+lookup_transparent_type (name)
+     const char *name;
+{
+  register struct symbol *sym;
+  register struct symtab *s = NULL;
+  register struct partial_symtab *ps;
+  struct blockvector *bv;
+  register struct objfile *objfile;
+  register struct block *block;
+  register struct minimal_symbol *msymbol;
+
+  /* Now search all the global symbols.  Do the symtab's first, then
+     check the psymtab's. If a psymtab indicates the existence
+     of the desired name as a global, then do psymtab-to-symtab
+     conversion on the fly and return the found symbol.  */
+  
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+      sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+      if (sym && !TYPE_IS_OPAQUE (SYMBOL_TYPE (sym)))
+	{
+	  return SYMBOL_TYPE (sym);
+	}
+    }
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      if (!ps->readin && lookup_partial_symbol (ps, name, 1, STRUCT_NAMESPACE))
+	{
+	  s = PSYMTAB_TO_SYMTAB(ps);
+	  bv = BLOCKVECTOR (s);
+	  block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	  sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+	  if (!sym) 
+            {
+              /* This shouldn't be necessary, but as a last resort
+               * try looking in the statics even though the psymtab
+               * claimed the symbol was global. It's possible that
+               * the psymtab gets it wrong in some cases.
+               */
+	      block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	      sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+              if (!sym)
+                error ("Internal: global symbol `%s' found in %s psymtab but not in symtab.\n\
+%s may be an inlined function, or may be a template function\n\
+(if a template, try specifying an instantiation: %s<type>).",
+                       name, ps->filename, name, name);
+            }
+          if (!TYPE_IS_OPAQUE (SYMBOL_TYPE (sym)))
+            return SYMBOL_TYPE (sym);
+	}
+    }
+
+  /* Now search the static file-level symbols.
+     Not strictly correct, but more useful than an error.
+     Do the symtab's first, then
+     check the psymtab's. If a psymtab indicates the existence
+     of the desired name as a file-level static, then do psymtab-to-symtab
+     conversion on the fly and return the found symbol.
+   */
+
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+      sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+      if (sym && !TYPE_IS_OPAQUE (SYMBOL_TYPE (sym)))
+	{
+	  return SYMBOL_TYPE (sym);
+	}
+    }
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      if (!ps->readin && lookup_partial_symbol (ps, name, 0, STRUCT_NAMESPACE))
+	{
+	  s = PSYMTAB_TO_SYMTAB(ps);
+	  bv = BLOCKVECTOR (s);
+	  block = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	  sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+	  if (!sym)
+            {
+              /* This shouldn't be necessary, but as a last resort
+               * try looking in the globals even though the psymtab
+               * claimed the symbol was static. It's possible that
+               * the psymtab gets it wrong in some cases.
+               */
+	      block = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+	      sym = lookup_block_symbol (block, name, STRUCT_NAMESPACE);
+              if (!sym)
+	        error ("Internal: static symbol `%s' found in %s psymtab but not in symtab.\n\
+%s may be an inlined function, or may be a template function\n\
+(if a template, try specifying an instantiation: %s<type>).",
+                       name, ps->filename, name, name);
+            }
+          if (!TYPE_IS_OPAQUE (SYMBOL_TYPE (sym)))
+            return SYMBOL_TYPE (sym);
+	}
+    }
+  return (struct type *) 0;
+}
+
+
+/* Find the psymtab containing main(). */
+/* FIXME:  What about languages without main() or specially linked
+   executables that have no main() ? */
+
+struct partial_symtab *
+find_main_psymtab ()
+{
+  register struct partial_symtab *pst;
+  register struct objfile *objfile;
+
+  ALL_PSYMTABS (objfile, pst)
+    {
+      if (lookup_partial_symbol (pst, "main", 1, VAR_NAMESPACE))
+	{
+	  return (pst);
+	}
+    }
+  return (NULL);
+}
+
+/* Search BLOCK for symbol NAME in NAMESPACE.
+
+   Note that if NAME is the demangled form of a C++ symbol, we will fail
+   to find a match during the binary search of the non-encoded names, but
+   for now we don't worry about the slight inefficiency of looking for
+   a match we'll never find, since it will go pretty quick.  Once the
+   binary search terminates, we drop through and do a straight linear
+   search on the symbols.  Each symbol which is marked as being a C++
+   symbol (language_cplus set) has both the encoded and non-encoded names
+   tested for a match. */
+
+struct symbol *
+lookup_block_symbol (block, name, namespace)
+     register const struct block *block;
+     const char *name;
+     const namespace_enum namespace;
+{
+  register int bot, top, inc;
+  register struct symbol *sym;
+  register struct symbol *sym_found = NULL;
+  register int do_linear_search = 1;
+
+  /* If the blocks's symbols were sorted, start with a binary search.  */
+
+  if (BLOCK_SHOULD_SORT (block))
+    {
+      /* Reset the linear search flag so if the binary search fails, we
+	 won't do the linear search once unless we find some reason to
+	 do so, such as finding a C++ symbol during the binary search.
+	 Note that for C++ modules, ALL the symbols in a block should
+	 end up marked as C++ symbols. */
+
+      do_linear_search = 0;
+      top = BLOCK_NSYMS (block);
+      bot = 0;
+
+      /* Advance BOT to not far before the first symbol whose name is NAME. */
+
+      while (1)
+	{
+	  inc = (top - bot + 1);
+	  /* No need to keep binary searching for the last few bits worth.  */
+	  if (inc < 4)
+	    {
+	      break;
+	    }
+	  inc = (inc >> 1) + bot;
+	  sym = BLOCK_SYM (block, inc);
+	  if (!do_linear_search
+	      && (SYMBOL_LANGUAGE (sym) == language_cplus
+		  || SYMBOL_LANGUAGE (sym) == language_java
+		  ))
+	    {
+	      do_linear_search = 1;
+	    }
+	  if (SYMBOL_NAME (sym)[0] < name[0])
+	    {
+	      bot = inc;
+	    }
+	  else if (SYMBOL_NAME (sym)[0] > name[0])
+	    {
+	      top = inc;
+	    }
+	  else if (STRCMP (SYMBOL_NAME (sym), name) < 0)
+	    {
+	      bot = inc;
+	    }
+	  else
+	    {
+	      top = inc;
+	    }
+	}
+
+      /* Now scan forward until we run out of symbols, find one whose
+	 name is greater than NAME, or find one we want.  If there is
+	 more than one symbol with the right name and namespace, we
+	 return the first one; I believe it is now impossible for us
+	 to encounter two symbols with the same name and namespace
+	 here, because blocks containing argument symbols are no
+	 longer sorted.  */
+
+      top = BLOCK_NSYMS (block);
+      while (bot < top)
+	{
+	  sym = BLOCK_SYM (block, bot);
+	  inc = SYMBOL_NAME (sym)[0] - name[0];
+	  if (inc == 0)
+	    {
+	      inc = STRCMP (SYMBOL_NAME (sym), name);
+	    }
+	  if (inc == 0 && SYMBOL_NAMESPACE (sym) == namespace)
+	    {
+	      return (sym);
+	    }
+	  if (inc > 0)
+	    {
+	      break;
+	    }
+	  bot++;
+	}
+    }
+
+  /* Here if block isn't sorted, or we fail to find a match during the
+     binary search above.  If during the binary search above, we find a
+     symbol which is a C++ symbol, then we have re-enabled the linear
+     search flag which was reset when starting the binary search.
+
+     This loop is equivalent to the loop above, but hacked greatly for speed.
+
+     Note that parameter symbols do not always show up last in the
+     list; this loop makes sure to take anything else other than
+     parameter symbols first; it only uses parameter symbols as a
+     last resort.  Note that this only takes up extra computation
+     time on a match.  */
+
+  if (do_linear_search)
+    {
+      top = BLOCK_NSYMS (block);
+      bot = 0;
+      while (bot < top)
+	{
+	  sym = BLOCK_SYM (block, bot);
+	  if (SYMBOL_NAMESPACE (sym) == namespace &&
+	      SYMBOL_MATCHES_NAME (sym, name))
+	    {
+	      /* If SYM has aliases, then use any alias that is active
+		 at the current PC.  If no alias is active at the current
+		 PC, then use the main symbol.
+
+		 ?!? Is checking the current pc correct?  Is this routine
+		 ever called to look up a symbol from another context?  */
+              if (SYMBOL_ALIASES (sym))
+                sym = find_active_alias (sym, read_pc ());
+
+	      sym_found = sym;
+	      if (SYMBOL_CLASS (sym) != LOC_ARG &&
+		  SYMBOL_CLASS (sym) != LOC_LOCAL_ARG &&
+		  SYMBOL_CLASS (sym) != LOC_REF_ARG &&
+		  SYMBOL_CLASS (sym) != LOC_REGPARM &&
+		  SYMBOL_CLASS (sym) != LOC_REGPARM_ADDR &&
+		  SYMBOL_CLASS (sym) != LOC_BASEREG_ARG)
+		{
+		  break;
+		}
+	    }
+	  bot++;
+	}
+    }
+  return (sym_found);		/* Will be NULL if not found. */
+}
+
+/* Given a main symbol SYM and ADDR, search through the alias
+   list to determine if an alias is active at ADDR and return
+   the active alias.
+
+   If no alias is active, then return SYM.  */
+
+static struct symbol *
+find_active_alias (sym, addr)
+  struct symbol *sym;
+  CORE_ADDR addr;
+{
+  struct range_list *r;
+  struct alias_list *aliases;
+
+  /* If we have aliases, check them first.  */
+  aliases = SYMBOL_ALIASES (sym);
+
+  while (aliases)
+    {
+      if (!SYMBOL_RANGES (aliases->sym))
+        return aliases->sym;
+      for (r = SYMBOL_RANGES (aliases->sym); r; r = r->next)
+	{
+	  if (r->start <= addr && r->end > addr)
+	    return aliases->sym;
+	}
+      aliases = aliases->next;
+    }
+
+  /* Nothing found, return the main symbol.  */
+  return sym;
+}
+
+
+/* Return the symbol for the function which contains a specified
+   lexical block, described by a struct block BL.  */
+
+struct symbol *
+block_function (bl)
+     struct block *bl;
+{
+  while (BLOCK_FUNCTION (bl) == 0 && BLOCK_SUPERBLOCK (bl) != 0)
+    bl = BLOCK_SUPERBLOCK (bl);
+
+  return BLOCK_FUNCTION (bl);
+}
+
+/* Find the symtab associated with PC and SECTION.  Look through the
+   psymtabs and read in another symtab if necessary. */
+
+struct symtab *
+find_pc_sect_symtab (pc, section)
+     CORE_ADDR pc;
+     asection *section;
+{
+  register struct block *b;
+  struct blockvector *bv;
+  register struct symtab *s = NULL;
+  register struct symtab *best_s = NULL;
+  register struct partial_symtab *ps;
+  register struct objfile *objfile;
+  CORE_ADDR distance = 0;
+
+  /* Search all symtabs for the one whose file contains our address, and which
+     is the smallest of all the ones containing the address.  This is designed
+     to deal with a case like symtab a is at 0x1000-0x2000 and 0x3000-0x4000
+     and symtab b is at 0x2000-0x3000.  So the GLOBAL_BLOCK for a is from
+     0x1000-0x4000, but for address 0x2345 we want to return symtab b.
+
+     This happens for native ecoff format, where code from included files
+     gets its own symtab. The symtab for the included file should have
+     been read in already via the dependency mechanism.
+     It might be swifter to create several symtabs with the same name
+     like xcoff does (I'm not sure).
+
+     It also happens for objfiles that have their functions reordered.
+     For these, the symtab we are looking for is not necessarily read in.  */
+
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      b = BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK);
+
+      if (BLOCK_START (b) <= pc
+#if defined(HPUXHPPA)
+	  && BLOCK_END (b) >= pc
+#else
+	  && BLOCK_END (b) > pc
+#endif
+	  && (distance == 0
+	      || BLOCK_END (b) - BLOCK_START (b) < distance))
+	{
+	  /* For an objfile that has its functions reordered,
+	     find_pc_psymtab will find the proper partial symbol table
+	     and we simply return its corresponding symtab.  */
+	  /* In order to better support objfiles that contain both
+	     stabs and coff debugging info, we continue on if a psymtab
+	     can't be found. */
+	  if ((objfile->flags & OBJF_REORDERED) && objfile->psymtabs)
+	    {
+	      ps = find_pc_sect_psymtab (pc, section);
+	      if (ps)
+		return PSYMTAB_TO_SYMTAB (ps);
+	    }
+	  if (section != 0)
+	    {
+	      int i;
+
+	      for (i = 0; i < b->nsyms; i++)
+		{
+		  fixup_symbol_section (b->sym[i], objfile);
+		  if (section == SYMBOL_BFD_SECTION (b->sym[i]))
+		    break;
+		}
+	      if (i >= b->nsyms)
+		continue;	/* no symbol in this symtab matches section */
+	    }
+	  distance = BLOCK_END (b) - BLOCK_START (b);
+	  best_s = s;
+	}
+    }
+
+  if (best_s != NULL)
+    return(best_s);
+
+  s = NULL;
+  ps = find_pc_sect_psymtab (pc, section);
+  if (ps)
+    {
+      if (ps->readin)
+	/* Might want to error() here (in case symtab is corrupt and
+	   will cause a core dump), but maybe we can successfully
+	   continue, so let's not.  */
+	/* FIXME-32x64: assumes pc fits in a long */
+	warning ("\
+(Internal error: pc 0x%lx in read in psymtab, but not in symtab.)\n",
+	         (unsigned long) pc);
+      s = PSYMTAB_TO_SYMTAB (ps);
+    }
+  return (s);
+}
+
+/* Find the symtab associated with PC.  Look through the psymtabs and
+   read in another symtab if necessary.  Backward compatibility, no section */
+
+struct symtab *
+find_pc_symtab (pc)
+     CORE_ADDR pc;
+{
+  return find_pc_sect_symtab (pc, find_pc_mapped_section (pc));
+}
+
+
+#if 0
+
+/* Find the closest symbol value (of any sort -- function or variable)
+   for a given address value.  Slow but complete.  (currently unused,
+   mainly because it is too slow.  We could fix it if each symtab and
+   psymtab had contained in it the addresses ranges of each of its
+   sections, which also would be required to make things like "info
+   line *0x2345" cause psymtabs to be converted to symtabs).  */
+
+struct symbol *
+find_addr_symbol (addr, symtabp, symaddrp)
+     CORE_ADDR addr;
+     struct symtab **symtabp;
+     CORE_ADDR *symaddrp;
+{
+  struct symtab *symtab, *best_symtab;
+  struct objfile *objfile;
+  register int bot, top;
+  register struct symbol *sym;
+  register CORE_ADDR sym_addr;
+  struct block *block;
+  int blocknum;
+
+  /* Info on best symbol seen so far */
+
+  register CORE_ADDR best_sym_addr = 0;
+  struct symbol *best_sym = 0;
+
+  /* FIXME -- we should pull in all the psymtabs, too!  */
+  ALL_SYMTABS (objfile, symtab)
+    {
+      /* Search the global and static blocks in this symtab for
+	 the closest symbol-address to the desired address.  */
+
+      for (blocknum = GLOBAL_BLOCK; blocknum <= STATIC_BLOCK; blocknum++)
+	{
+	  QUIT;
+	  block = BLOCKVECTOR_BLOCK (BLOCKVECTOR (symtab), blocknum);
+	  top = BLOCK_NSYMS (block);
+	  for (bot = 0; bot < top; bot++)
+	    {
+	      sym = BLOCK_SYM (block, bot);
+	      switch (SYMBOL_CLASS (sym))
+		{
+		case LOC_STATIC:	
+		case LOC_LABEL:	
+		  sym_addr = SYMBOL_VALUE_ADDRESS (sym);
+		  break;
+
+                case LOC_INDIRECT:
+		  sym_addr = SYMBOL_VALUE_ADDRESS (sym);
+                  /* An indirect symbol really lives at *sym_addr,
+                   * so an indirection needs to be done.
+                   * However, I am leaving this commented out because it's
+                   * expensive, and it's possible that symbolization
+                   * could be done without an active process (in
+                   * case this read_memory will fail). RT
+                  sym_addr = read_memory_unsigned_integer
+                      (sym_addr, TARGET_PTR_BIT / TARGET_CHAR_BIT);
+                   */
+                  break;
+
+		case LOC_BLOCK:
+		  sym_addr = BLOCK_START (SYMBOL_BLOCK_VALUE (sym));
+		  break;
+
+		default:
+		  continue;
+		}
+
+		if (sym_addr <= addr)
+		  if (sym_addr > best_sym_addr)
+		    {
+		      /* Quit if we found an exact match.  */
+		      best_sym = sym;
+		      best_sym_addr = sym_addr;
+		      best_symtab = symtab;
+		      if (sym_addr == addr)
+			goto done;
+		    }
+	    }
+	}
+    }
+
+ done:
+  if (symtabp)
+    *symtabp = best_symtab;
+  if (symaddrp)
+    *symaddrp = best_sym_addr;
+  return best_sym;
+}
+#endif /* 0 */
+
+/* Find the source file and line number for a given PC value and section.
+   Return a structure containing a symtab pointer, a line number,
+   and a pc range for the entire source line.
+   The value's .pc field is NOT the specified pc.
+   NOTCURRENT nonzero means, if specified pc is on a line boundary,
+   use the line that ends there.  Otherwise, in that case, the line
+   that begins there is used.  */
+
+/* The big complication here is that a line may start in one file, and end just
+   before the start of another file.  This usually occurs when you #include
+   code in the middle of a subroutine.  To properly find the end of a line's PC
+   range, we must search all symtabs associated with this compilation unit, and
+   find the one whose first PC is closer than that of the next line in this
+   symtab.  */
+
+/* If it's worth the effort, we could be using a binary search.  */
+
+struct symtab_and_line
+find_pc_sect_line (pc, section, notcurrent)
+     CORE_ADDR pc;
+     struct sec *section;
+     int notcurrent;
+{
+  struct symtab *s;
+  register struct linetable *l;
+  register int len;
+  register int i;
+  register struct linetable_entry *item;
+  struct symtab_and_line val;
+  struct blockvector *bv;
+  struct minimal_symbol *msymbol;
+  struct minimal_symbol *mfunsym;
+
+  /* Info on best line seen so far, and where it starts, and its file.  */
+
+  struct linetable_entry *best = NULL;
+  CORE_ADDR best_end = 0;
+  struct symtab *best_symtab = 0;
+
+  /* Store here the first line number
+     of a file which contains the line at the smallest pc after PC.
+     If we don't find a line whose range contains PC,
+     we will use a line one less than this,
+     with a range from the start of that file to the first line's pc.  */
+  struct linetable_entry *alt = NULL;
+  struct symtab *alt_symtab = 0;
+
+  /* Info on best line seen in this file.  */
+
+  struct linetable_entry *prev;
+
+  /* If this pc is not from the current frame,
+     it is the address of the end of a call instruction.
+     Quite likely that is the start of the following statement.
+     But what we want is the statement containing the instruction.
+     Fudge the pc to make sure we get that.  */
+
+  INIT_SAL (&val);	/* initialize to zeroes */
+
+  if (notcurrent)
+    pc -= 1;
+
+ /* elz: added this because this function returned the wrong
+     information if the pc belongs to a stub (import/export)
+     to call a shlib function. This stub would be anywhere between
+     two functions in the target, and the line info was erroneously 
+     taken to be the one of the line before the pc. 
+  */
+  /* RT: Further explanation:
+   *
+   * We have stubs (trampolines) inserted between procedures.
+   *
+   * Example: "shr1" exists in a shared library, and a "shr1" stub also
+   * exists in the main image.
+   *
+   * In the minimal symbol table, we have a bunch of symbols
+   * sorted by start address. The stubs are marked as "trampoline",
+   * the others appear as text. E.g.:
+   *
+   *  Minimal symbol table for main image 
+   *     main:  code for main (text symbol)
+   *     shr1: stub  (trampoline symbol)
+   *     foo:   code for foo (text symbol)
+   *     ...
+   *  Minimal symbol table for "shr1" image:
+   *     ...
+   *     shr1: code for shr1 (text symbol)
+   *     ...
+   *
+   * So the code below is trying to detect if we are in the stub
+   * ("shr1" stub), and if so, find the real code ("shr1" trampoline),
+   * and if found,  do the symbolization from the real-code address
+   * rather than the stub address.
+   *
+   * Assumptions being made about the minimal symbol table:
+   *   1. lookup_minimal_symbol_by_pc() will return a trampoline only
+   *      if we're really in the trampoline. If we're beyond it (say
+   *      we're in "foo" in the above example), it'll have a closer 
+   *      symbol (the "foo" text symbol for example) and will not
+   *      return the trampoline.
+   *   2. lookup_minimal_symbol_text() will find a real text symbol
+   *      corresponding to the trampoline, and whose address will
+   *      be different than the trampoline address. I put in a sanity
+   *      check for the address being the same, to avoid an
+   *      infinite recursion.
+   */
+  msymbol = lookup_minimal_symbol_by_pc(pc);
+  if (msymbol != NULL) 
+    if (MSYMBOL_TYPE (msymbol) == mst_solib_trampoline)
+    {
+     mfunsym = lookup_minimal_symbol_text (SYMBOL_NAME (msymbol), NULL, NULL);
+     if (mfunsym == NULL) 
+        /* I eliminated this warning since it is coming out
+         * in the following situation:
+         * gdb shmain // test program with shared libraries
+         * (gdb) break shr1  // function in shared lib
+         * Warning: In stub for ...
+         * In the above situation, the shared lib is not loaded yet, 
+         * so of course we can't find the real func/line info,
+         * but the "break" still works, and the warning is annoying.
+         * So I commented out the warning. RT */
+        /* warning ("In stub for %s; unable to find real function/line info", SYMBOL_NAME(msymbol)) */;
+        /* fall through */
+     else if (SYMBOL_VALUE(mfunsym) == SYMBOL_VALUE(msymbol))
+        /* Avoid infinite recursion */
+        /* See above comment about why warning is commented out */
+        /* warning ("In stub for %s; unable to find real function/line info", SYMBOL_NAME(msymbol)) */;
+        /* fall through */
+     else
+       return find_pc_line( SYMBOL_VALUE (mfunsym), 0);
+    }
+
+
+  s = find_pc_sect_symtab (pc, section);
+  if (!s)
+    {
+      /* if no symbol information, return previous pc */
+      if (notcurrent)
+	pc++;
+      val.pc = pc;
+      return val;
+    }
+
+  bv = BLOCKVECTOR (s);
+
+  /* Look at all the symtabs that share this blockvector.
+     They all have the same apriori range, that we found was right;
+     but they have different line tables.  */
+
+  for (; s && BLOCKVECTOR (s) == bv; s = s->next)
+    {
+      /* Find the best line in this symtab.  */
+      l = LINETABLE (s);
+      if (!l)
+        continue;
+      len = l->nitems;
+      if (len <= 0)
+	{
+	  /* I think len can be zero if the symtab lacks line numbers
+	     (e.g. gcc -g1).  (Either that or the LINETABLE is NULL;
+	     I'm not sure which, and maybe it depends on the symbol
+	     reader).  */
+	  continue;
+	}
+
+      prev = NULL;
+      item = l->item;		/* Get first line info */
+
+      /* Is this file's first line closer than the first lines of other files?
+	 If so, record this file, and its first line, as best alternate.  */
+      if (item->pc > pc && (!alt || item->pc < alt->pc))
+	{
+	  alt = item;
+	  alt_symtab = s;
+	}
+
+      for (i = 0; i < len; i++, item++)
+	{
+	  /* Leave prev pointing to the linetable entry for the last line
+	     that started at or before PC.  */
+	  if (item->pc > pc)
+	    break;
+
+	  prev = item;
+	}
+
+      /* At this point, prev points at the line whose start addr is <= pc, and
+	 item points at the next line.  If we ran off the end of the linetable
+	 (pc >= start of the last line), then prev == item.  If pc < start of
+	 the first line, prev will not be set.  */
+
+      /* Is this file's best line closer than the best in the other files?
+	 If so, record this file, and its best line, as best so far.  */
+
+      if (prev && (!best || prev->pc > best->pc))
+	{
+	  best = prev;
+	  best_symtab = s;
+	  /* If another line is in the linetable, and its PC is closer
+	     than the best_end we currently have, take it as best_end.  */
+	  if (i < len && (best_end == 0 || best_end > item->pc))
+	    best_end = item->pc;
+	}
+    }
+
+  if (!best_symtab)
+    {
+      if (!alt_symtab)
+	{			/* If we didn't find any line # info, just
+				   return zeros.  */
+	  val.pc = pc;
+	}
+      else
+	{
+	  val.symtab = alt_symtab;
+	  val.line = alt->line - 1;
+
+	  /* Don't return line 0, that means that we didn't find the line.  */
+	  if (val.line == 0) ++val.line;
+
+	  val.pc = BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
+	  val.end = alt->pc;
+	}
+    }
+  else
+    {
+      val.symtab = best_symtab;
+      val.line = best->line;
+      val.pc = best->pc;
+      if (best_end && (!alt || best_end < alt->pc))
+	val.end = best_end;
+      else if (alt)
+	val.end = alt->pc;
+      else
+	val.end = BLOCK_END (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK));
+    }
+  val.section = section;
+  return val;
+}
+
+/* Backward compatibility (no section) */
+
+struct symtab_and_line
+find_pc_line (pc, notcurrent)
+     CORE_ADDR pc;
+     int notcurrent;
+{
+  asection     *section;
+
+  section = find_pc_overlay (pc);
+  if (pc_in_unmapped_range (pc, section))
+    pc = overlay_mapped_address (pc, section);
+  return find_pc_sect_line (pc, section, notcurrent);
+}
+
+
+static struct symtab* find_line_symtab PARAMS ((struct symtab *, int,
+						int *, int *));
+
+/* Find line number LINE in any symtab whose name is the same as
+   SYMTAB.
+
+   If found, return the symtab that contains the linetable in which it was
+   found, set *INDEX to the index in the linetable of the best entry
+   found, and set *EXACT_MATCH nonzero if the value returned is an
+   exact match.
+
+   If not found, return NULL.  */
+
+static struct symtab*
+find_line_symtab (symtab, line, index, exact_match)
+     struct symtab *symtab;
+     int line;
+     int *index;
+     int *exact_match;
+{
+  int exact;
+
+  /* BEST_INDEX and BEST_LINETABLE identify the smallest linenumber > LINE
+     so far seen.  */
+
+  int best_index;
+  struct linetable *best_linetable;
+  struct symtab *best_symtab;
+
+  /* First try looking it up in the given symtab.  */
+  best_linetable = LINETABLE (symtab);
+  best_symtab = symtab;
+  best_index = find_line_common (best_linetable, line, &exact);
+  if (best_index < 0 || !exact)
+    {
+      /* Didn't find an exact match.  So we better keep looking for
+	 another symtab with the same name.  In the case of xcoff,
+	 multiple csects for one source file (produced by IBM's FORTRAN
+	 compiler) produce multiple symtabs (this is unavoidable
+	 assuming csects can be at arbitrary places in memory and that
+	 the GLOBAL_BLOCK of a symtab has a begin and end address).  */
+
+      /* BEST is the smallest linenumber > LINE so far seen,
+	 or 0 if none has been seen so far.
+	 BEST_INDEX and BEST_LINETABLE identify the item for it.  */
+      int best;
+
+      struct objfile *objfile;
+      struct symtab *s;
+
+      if (best_index >= 0)
+	best = best_linetable->item[best_index].line;
+      else
+	best = 0;
+
+      ALL_SYMTABS (objfile, s)
+	{
+	  struct linetable *l;
+	  int ind;
+
+	  if (!STREQ (symtab->filename, s->filename))
+	    continue;
+	  l = LINETABLE (s);
+	  ind = find_line_common (l, line, &exact);
+	  if (ind >= 0)
+	    {
+	      if (exact)
+		{
+		  best_index = ind;
+		  best_linetable = l;
+		  best_symtab = s;
+		  goto done;
+		}
+	      if (best == 0 || l->item[ind].line < best)
+		{
+		  best = l->item[ind].line;
+		  best_index = ind;
+		  best_linetable = l;
+		  best_symtab = s;
+		}
+	    }
+	}
+    }
+ done:
+  if (best_index < 0)
+    return NULL;
+
+  if (index)
+    *index = best_index;
+  if (exact_match)
+    *exact_match = exact;
+
+  return best_symtab;
+}
+
+/* Set the PC value for a given source file and line number and return true.
+   Returns zero for invalid line number (and sets the PC to 0).
+   The source file is specified with a struct symtab.  */
+
+int
+find_line_pc (symtab, line, pc)
+     struct symtab *symtab;
+     int line;
+     CORE_ADDR *pc;
+{
+  struct linetable *l;
+  int ind;
+
+  *pc = 0;
+  if (symtab == 0)
+    return 0;
+
+  symtab = find_line_symtab (symtab, line, &ind, NULL);
+  if (symtab != NULL)
+    {
+      l = LINETABLE (symtab);
+      *pc = l->item[ind].pc;
+      return 1;
+    }
+  else
+    return 0;
+}
+
+/* Find the range of pc values in a line.
+   Store the starting pc of the line into *STARTPTR
+   and the ending pc (start of next line) into *ENDPTR.
+   Returns 1 to indicate success.
+   Returns 0 if could not find the specified line.  */
+
+int
+find_line_pc_range (sal, startptr, endptr)
+     struct symtab_and_line sal;
+     CORE_ADDR *startptr, *endptr;
+{
+  CORE_ADDR startaddr;
+  struct symtab_and_line found_sal;
+
+  startaddr = sal.pc;
+  if (startaddr==0 && !find_line_pc (sal.symtab, sal.line, &startaddr))
+    return 0;
+
+  /* This whole function is based on address.  For example, if line 10 has
+     two parts, one from 0x100 to 0x200 and one from 0x300 to 0x400, then
+     "info line *0x123" should say the line goes from 0x100 to 0x200
+     and "info line *0x355" should say the line goes from 0x300 to 0x400.
+     This also insures that we never give a range like "starts at 0x134
+     and ends at 0x12c".  */
+
+  found_sal = find_pc_sect_line (startaddr, sal.section, 0);
+  if (found_sal.line != sal.line)
+    {
+      /* The specified line (sal) has zero bytes.  */
+      *startptr = found_sal.pc;
+      *endptr = found_sal.pc;
+    }
+  else
+    {
+      *startptr = found_sal.pc;
+      *endptr = found_sal.end;
+    }
+  return 1;
+}
+
+/* Given a line table and a line number, return the index into the line
+   table for the pc of the nearest line whose number is >= the specified one.
+   Return -1 if none is found.  The value is >= 0 if it is an index.
+
+   Set *EXACT_MATCH nonzero if the value returned is an exact match.  */
+
+static int
+find_line_common (l, lineno, exact_match)
+     register struct linetable *l;
+     register int lineno;
+     int *exact_match;
+{
+  register int i;
+  register int len;
+
+  /* BEST is the smallest linenumber > LINENO so far seen,
+     or 0 if none has been seen so far.
+     BEST_INDEX identifies the item for it.  */
+
+  int best_index = -1;
+  int best = 0;
+
+  if (lineno <= 0)
+    return -1;
+  if (l == 0)
+    return -1;
+
+  len = l->nitems;
+  for (i = 0; i < len; i++)
+    {
+      register struct linetable_entry *item = &(l->item[i]);
+
+      if (item->line == lineno)
+	{
+	  /* Return the first (lowest address) entry which matches.  */
+	  *exact_match = 1;
+	  return i;
+	}
+
+      if (item->line > lineno && (best == 0 || item->line < best))
+	{
+	  best = item->line;
+	  best_index = i;
+	}
+    }
+
+  /* If we got here, we didn't get an exact match.  */
+
+  *exact_match = 0;
+  return best_index;
+}
+
+int
+find_pc_line_pc_range (pc, startptr, endptr)
+     CORE_ADDR pc;
+     CORE_ADDR *startptr, *endptr;
+{
+  struct symtab_and_line sal;
+  sal = find_pc_line (pc, 0);
+  *startptr = sal.pc;
+  *endptr = sal.end;
+  return sal.symtab != 0;
+}
+
+/* Given a function symbol SYM, find the symtab and line for the start
+   of the function.
+   If the argument FUNFIRSTLINE is nonzero, we want the first line
+   of real code inside the function.  */
+
+static struct symtab_and_line
+find_function_start_sal PARAMS ((struct symbol *sym, int));
+
+static struct symtab_and_line
+find_function_start_sal (sym, funfirstline)
+     struct symbol *sym;
+     int funfirstline;
+{
+  CORE_ADDR pc;
+  struct symtab_and_line sal;
+
+  pc = BLOCK_START (SYMBOL_BLOCK_VALUE (sym));
+  fixup_symbol_section (sym, NULL);
+  if (funfirstline)
+    { /* skip "first line" of function (which is actually its prologue) */
+      asection *section = SYMBOL_BFD_SECTION (sym);
+      /* If function is in an unmapped overlay, use its unmapped LMA
+	 address, so that SKIP_PROLOGUE has something unique to work on */
+      if (section_is_overlay (section) &&
+	  !section_is_mapped (section))
+	pc = overlay_unmapped_address (pc, section);
+
+      pc += FUNCTION_START_OFFSET;
+      SKIP_PROLOGUE (pc);
+
+      /* For overlays, map pc back into its mapped VMA range */
+      pc = overlay_mapped_address (pc, section);
+    }
+  sal = find_pc_sect_line (pc, SYMBOL_BFD_SECTION (sym), 0);
+
+#ifdef PROLOGUE_FIRSTLINE_OVERLAP
+  /* Convex: no need to suppress code on first line, if any */
+  sal.pc = pc;
+#else
+  /* Check if SKIP_PROLOGUE left us in mid-line, and the next
+     line is still part of the same function.  */
+  if (sal.pc != pc
+      && BLOCK_START (SYMBOL_BLOCK_VALUE (sym)) <= sal.end
+      && sal.end < BLOCK_END (SYMBOL_BLOCK_VALUE (sym)))
+    {
+      /* First pc of next line */
+      pc = sal.end;
+      /* Recalculate the line number (might not be N+1).  */
+      sal = find_pc_sect_line (pc, SYMBOL_BFD_SECTION (sym), 0);
+    }
+  sal.pc = pc;
+#endif
+
+  return sal;
+}
+
+/* If P is of the form "operator[ \t]+..." where `...' is
+   some legitimate operator text, return a pointer to the
+   beginning of the substring of the operator text.
+   Otherwise, return "".  */
+char *
+operator_chars (p, end)
+     char *p;
+     char **end;
+{
+  *end = "";
+  if (strncmp (p, "operator", 8))
+    return *end;
+  p += 8;
+
+  /* Don't get faked out by `operator' being part of a longer
+     identifier.  */
+  if (isalpha(*p) || *p == '_' || *p == '$' || *p == '\0')
+    return *end;
+
+  /* Allow some whitespace between `operator' and the operator symbol.  */
+  while (*p == ' ' || *p == '\t')
+    p++;
+
+  /* Recognize 'operator TYPENAME'. */
+
+  if (isalpha(*p) || *p == '_' || *p == '$')
+    {
+      register char *q = p+1;
+      while (isalnum(*q) || *q == '_' || *q == '$')
+	q++;
+      *end = q;
+      return p;
+    }
+
+  switch (*p)
+    {
+    case '!':
+    case '=':
+    case '*':
+    case '/':
+    case '%':
+    case '^':
+      if (p[1] == '=')
+	*end = p+2;
+      else
+	*end = p+1;
+      return p;
+    case '<':
+    case '>':
+    case '+':
+    case '-':
+    case '&':
+    case '|':
+      if (p[1] == '=' || p[1] == p[0])
+	*end = p+2;
+      else
+	*end = p+1;
+      return p;
+    case '~':
+    case ',':
+      *end = p+1;
+      return p;
+    case '(':
+      if (p[1] != ')')
+	error ("`operator ()' must be specified without whitespace in `()'");
+      *end = p+2;
+      return p;
+    case '?':
+      if (p[1] != ':')
+	error ("`operator ?:' must be specified without whitespace in `?:'");
+      *end = p+2;
+      return p;
+    case '[':
+      if (p[1] != ']')
+	error ("`operator []' must be specified without whitespace in `[]'");
+      *end = p+2;
+      return p;
+    default:
+      error ("`operator %s' not supported", p);
+      break;
+    }
+  *end = "";
+  return *end;
+}
+
+/* Return the number of methods described for TYPE, including the
+   methods from types it derives from. This can't be done in the symbol
+   reader because the type of the baseclass might still be stubbed
+   when the definition of the derived class is parsed.  */
+
+static int total_number_of_methods PARAMS ((struct type *type));
+
+static int
+total_number_of_methods (type)
+     struct type *type;
+{
+  int n;
+  int count;
+
+  CHECK_TYPEDEF (type);
+  if (TYPE_CPLUS_SPECIFIC (type) == NULL)
+    return 0;
+  count = TYPE_NFN_FIELDS_TOTAL (type);
+
+  for (n = 0; n < TYPE_N_BASECLASSES (type); n++)
+    count += total_number_of_methods (TYPE_BASECLASS (type, n));
+
+  return count;
+}
+
+/* Recursive helper function for decode_line_1.
+   Look for methods named NAME in type T.
+   Return number of matches.
+   Put matches in SYM_ARR, which should have been allocated with
+   a size of total_number_of_methods (T) * sizeof (struct symbol *).
+   Note that this function is g++ specific.  */
+
+static int
+find_methods (t, name, sym_arr)
+     struct type *t;
+     char *name;
+     struct symbol **sym_arr;
+{
+  int i1 = 0;
+  int ibase;
+  struct symbol *sym_class;
+  char *class_name = type_name_no_tag (t);
+
+  /* Ignore this class if it doesn't have a name.  This is ugly, but
+     unless we figure out how to get the physname without the name of
+     the class, then the loop can't do any good.  */
+  if (class_name
+      && (sym_class = lookup_symbol (class_name,
+				     (struct block *)NULL,
+				     STRUCT_NAMESPACE,
+				     (int *)NULL,
+				     (struct symtab **)NULL)))
+    {
+      int method_counter;
+
+      /* FIXME: Shouldn't this just be CHECK_TYPEDEF (t)?  */
+      t = SYMBOL_TYPE (sym_class);
+
+      /* Loop over each method name.  At this level, all overloads of a name
+	 are counted as a single name.  There is an inner loop which loops over
+	 each overload.  */
+
+      for (method_counter = TYPE_NFN_FIELDS (t) - 1;
+	   method_counter >= 0;
+	   --method_counter)
+	{
+	  int field_counter;
+	  char *method_name = TYPE_FN_FIELDLIST_NAME (t, method_counter);
+	  char dem_opname[64];
+
+          if (strncmp (method_name, "__", 2) == 0 ||
+	      strncmp (method_name, "op", 2) == 0 ||
+	      strncmp (method_name, "type", 4) == 0)
+            {
+	      if (cplus_demangle_opname (method_name, dem_opname, DMGL_ANSI))
+	        method_name = dem_opname;
+	      else if (cplus_demangle_opname (method_name, dem_opname, 0))
+	        method_name = dem_opname; 
+            }
+
+	  if (STREQ (name, method_name))
+	    /* Find all the overloaded methods with that name.  */
+	    for (field_counter = TYPE_FN_FIELDLIST_LENGTH (t, method_counter) - 1;
+		 field_counter >= 0;
+		 --field_counter)
+	      {
+		struct fn_field *f;
+		char *phys_name;
+
+		f = TYPE_FN_FIELDLIST1 (t, method_counter);
+
+		if (TYPE_FN_FIELD_STUB (f, field_counter))
+		  {
+		    char *tmp_name;
+
+		    tmp_name = gdb_mangle_name (t,
+						 method_counter,
+						 field_counter);
+		    phys_name = alloca (strlen (tmp_name) + 1);
+		    strcpy (phys_name, tmp_name);
+		    free (tmp_name);
+		  }
+		else
+		  phys_name = TYPE_FN_FIELD_PHYSNAME (f, field_counter);
+
+		/* Destructor is handled by caller, dont add it to the list */
+		if (DESTRUCTOR_PREFIX_P (phys_name))
+		  continue;
+
+		sym_arr[i1] = lookup_symbol (phys_name,
+					     NULL, VAR_NAMESPACE,
+					     (int *) NULL,
+					     (struct symtab **) NULL);
+		if (sym_arr[i1])
+		  i1++;
+		else
+		  {
+		    /* This error message gets printed, but the method
+		       still seems to be found
+		       fputs_filtered("(Cannot find method ", gdb_stdout);
+		       fprintf_symbol_filtered (gdb_stdout, phys_name,
+		       language_cplus,
+		       DMGL_PARAMS | DMGL_ANSI);
+		       fputs_filtered(" - possibly inlined.)\n", gdb_stdout);
+		       */
+		  }
+	      }
+	}
+    }
+
+  /* Only search baseclasses if there is no match yet, since names in
+     derived classes override those in baseclasses.
+
+     FIXME: The above is not true; it is only true of member functions
+     if they have the same number of arguments (??? - section 13.1 of the
+     ARM says the function members are not in the same scope but doesn't
+     really spell out the rules in a way I understand.  In any case, if
+     the number of arguments differ this is a case in which we can overload
+     rather than hiding without any problem, and gcc 2.4.5 does overload
+     rather than hiding in this case).  */
+
+  if (i1 == 0)
+    for (ibase = 0; ibase < TYPE_N_BASECLASSES (t); ibase++)
+      i1 += find_methods (TYPE_BASECLASS (t, ibase), name, sym_arr + i1);
+
+  return i1;
+}
+
+/* Helper function for decode_line_1.
+   Build a canonical line spec in CANONICAL if it is non-NULL and if
+   the SAL has a symtab.
+   If SYMNAME is non-NULL the canonical line spec is `filename:symname'.
+   If SYMNAME is NULL the line number from SAL is used and the canonical
+   line spec is `filename:linenum'.  */
+
+static void
+build_canonical_line_spec (sal, symname, canonical)
+     struct symtab_and_line *sal;
+     char *symname;
+     char ***canonical;
+{
+  char **canonical_arr;
+  char *canonical_name;
+  char *filename;
+  struct symtab *s = sal->symtab;
+
+  if (s == (struct symtab *)NULL
+      || s->filename == (char *)NULL
+      || canonical == (char ***)NULL)
+    return;
+ 
+  canonical_arr = (char **) xmalloc (sizeof (char *));
+  *canonical = canonical_arr;
+
+  filename = s->filename;
+  if (symname != NULL)
+    {
+      canonical_name = xmalloc (strlen (filename) + strlen (symname) + 2);
+      sprintf (canonical_name, "%s:%s", filename, symname);
+    }
+  else
+    {
+      canonical_name = xmalloc (strlen (filename) + 30);
+      sprintf (canonical_name, "%s:%d", filename, sal->line);
+    }
+  canonical_arr[0] = canonical_name;
+}
+
+/* Parse a string that specifies a line number.
+   Pass the address of a char * variable; that variable will be
+   advanced over the characters actually parsed.
+
+   The string can be:
+
+   LINENUM -- that line number in current file.  PC returned is 0.
+   FILE:LINENUM -- that line in that file.  PC returned is 0.
+   FUNCTION -- line number of openbrace of that function.
+      PC returned is the start of the function.
+   VARIABLE -- line number of definition of that variable.
+      PC returned is 0.
+   FILE:FUNCTION -- likewise, but prefer functions in that file.
+   *EXPR -- line in which address EXPR appears.
+
+   FUNCTION may be an undebuggable function found in minimal symbol table.
+
+   If the argument FUNFIRSTLINE is nonzero, we want the first line
+   of real code inside a function when a function is specified, and it is
+   not OK to specify a variable or type to get its line number.
+
+   DEFAULT_SYMTAB specifies the file to use if none is specified.
+   It defaults to current_source_symtab.
+   DEFAULT_LINE specifies the line number to use for relative
+   line numbers (that start with signs).  Defaults to current_source_line.
+   If CANONICAL is non-NULL, store an array of strings containing the canonical
+   line specs there if necessary. Currently overloaded member functions and
+   line numbers or static functions without a filename yield a canonical
+   line spec. The array and the line spec strings are allocated on the heap,
+   it is the callers responsibility to free them.
+
+   Note that it is possible to return zero for the symtab
+   if no file is validly specified.  Callers must check that.
+   Also, the line number returned may be invalid.  */
+
+/* We allow single quotes in various places.  This is a hideous
+   kludge, which exists because the completer can't yet deal with the
+   lack of single quotes.  FIXME: write a linespec_completer which we
+   can use as appropriate instead of make_symbol_completion_list.  */
+
+struct symtabs_and_lines
+decode_line_1 (argptr, funfirstline, default_symtab, default_line, canonical)
+     char **argptr;
+     int funfirstline;
+     struct symtab *default_symtab;
+     int default_line;
+     char ***canonical;
+{
+  struct symtabs_and_lines values;
+#ifdef HPPA_COMPILER_BUG
+  /* FIXME: The native HP 9000/700 compiler has a bug which appears
+     when optimizing this file with target i960-vxworks.  I haven't
+     been able to construct a simple test case.  The problem is that
+     in the second call to SKIP_PROLOGUE below, the compiler somehow
+     does not realize that the statement val = find_pc_line (...) will
+     change the values of the fields of val.  It extracts the elements
+     into registers at the top of the block, and does not update the
+     registers after the call to find_pc_line.  You can check this by
+     inserting a printf at the end of find_pc_line to show what values
+     it is returning for val.pc and val.end and another printf after
+     the call to see what values the function actually got (remember,
+     this is compiling with cc -O, with this patch removed).  You can
+     also examine the assembly listing: search for the second call to
+     skip_prologue; the LDO statement before the next call to
+     find_pc_line loads the address of the structure which
+     find_pc_line will return; if there is a LDW just before the LDO,
+     which fetches an element of the structure, then the compiler
+     still has the bug.
+
+     Setting val to volatile avoids the problem.  We must undef
+     volatile, because the HPPA native compiler does not define
+     __STDC__, although it does understand volatile, and so volatile
+     will have been defined away in defs.h.  */
+#undef volatile
+  volatile struct symtab_and_line val;
+#define volatile /*nothing*/
+#else
+  struct symtab_and_line val;
+#endif
+  register char *p, *p1;
+  char *q, *pp, *ii, *p2;
+#if 0
+  char *q1;
+#endif
+  register struct symtab *s;
+
+  register struct symbol *sym;
+  /* The symtab that SYM was found in.  */
+  struct symtab *sym_symtab;
+
+  register CORE_ADDR pc;
+  register struct minimal_symbol *msymbol;
+  char *copy;
+  struct symbol *sym_class;
+  int i1;
+  int is_quoted;
+  int has_parens;  
+  int has_if = 0;
+  struct symbol **sym_arr;
+  struct type *t;
+  char *saved_arg = *argptr;
+  extern char *gdb_completer_quote_characters;
+  
+  INIT_SAL (&val);	/* initialize to zeroes */
+
+  /* Defaults have defaults.  */
+
+  if (default_symtab == 0)
+    {
+      default_symtab = current_source_symtab;
+      default_line = current_source_line;
+    }
+
+  /* See if arg is *PC */
+
+  if (**argptr == '*')
+    {
+      (*argptr)++;
+      pc = parse_and_eval_address_1 (argptr);
+
+      values.sals = (struct symtab_and_line *)
+	xmalloc (sizeof (struct symtab_and_line));
+
+      values.nelts = 1;
+      values.sals[0] = find_pc_line (pc, 0);
+      values.sals[0].pc = pc;
+      values.sals[0].section = find_pc_overlay (pc);
+
+      return values;
+    }
+
+  /* 'has_if' is for the syntax:
+   *     (gdb) break foo if (a==b)
+   */
+  if ((ii = strstr(*argptr, " if ")) != NULL ||
+      (ii = strstr(*argptr, "\tif ")) != NULL ||
+      (ii = strstr(*argptr, " if\t")) != NULL ||
+      (ii = strstr(*argptr, "\tif\t")) != NULL ||
+      (ii = strstr(*argptr, " if(")) != NULL ||
+      (ii = strstr(*argptr, "\tif( ")) != NULL) 
+    has_if = 1;
+  /* Temporarily zap out "if (condition)" to not
+   * confuse the parenthesis-checking code below.
+   * This is undone below. Do not change ii!!
+   */
+  if (has_if) {
+    *ii = '\0';
+  }
+
+  /* Set various flags.
+   * 'has_parens' is important for overload checking, where
+   * we allow things like: 
+   *     (gdb) break c::f(int)
+   */
+
+  /* Maybe arg is FILE : LINENUM or FILE : FUNCTION */
+
+  is_quoted = (**argptr
+	       && strchr (gdb_completer_quote_characters, **argptr) != NULL);
+
+  has_parens = ((pp = strchr (*argptr, '(')) != NULL
+		 && (pp = strchr (pp, ')')) != NULL);
+
+  /* Now that we're safely past the has_parens check,
+   * put back " if (condition)" so outer layers can see it 
+   */
+  if (has_if)
+    *ii = ' ';
+
+  /* Maybe arg is FILE : LINENUM or FILE : FUNCTION */
+  /* May also be CLASS::MEMBER, or NAMESPACE::NAME */
+  /* Look for ':', but ignore inside of <> */
+
+  s = NULL;
+  for (p = *argptr; *p; p++)
+    {
+      if (p[0] == '<') 
+	{
+          char * temp_end = find_template_name_end (p);
+          if (!temp_end)
+            error ("malformed template specification in command");
+          p = temp_end;
+	}
+      if (p[0] == ':' || p[0] == ' ' || p[0] == '\t' || !*p)
+	break;
+      if (p[0] == '.' && strchr (p, ':') == NULL) /* Java qualified method. */
+	{
+	  /* Find the *last* '.', since the others are package qualifiers. */
+	  for (p1 = p;  *p1;  p1++)
+	    {
+	      if (*p1 == '.')
+		p = p1;
+	    }
+	  break;
+	}
+    }
+  while (p[0] == ' ' || p[0] == '\t') p++;
+
+  if ((p[0] == ':' || p[0] == '.') && !has_parens)
+    {
+      /*  C++ */
+      /*  ... or Java */
+      if (is_quoted) *argptr = *argptr+1;
+      if (p[0] == '.' || p[1] ==':')
+	{
+          int ix;
+          char * saved_arg2 = *argptr;
+          char * temp_end;
+          /* First check for "global" namespace specification,
+             of the form "::foo". If found, skip over the colons
+             and jump to normal symbol processing */
+          if ((*argptr == p) || (p[-1] == ' ') || (p[-1] == '\t'))
+            saved_arg2 += 2;
+
+          /* We have what looks like a class or namespace
+             scope specification (A::B), possibly with many
+             levels of namespaces or classes (A::B::C::D).
+
+             Some versions of the HP ANSI C++ compiler (as also possibly
+             other compilers) generate class/function/member names with
+             embedded double-colons if they are inside namespaces. To
+             handle this, we loop a few times, considering larger and
+             larger prefixes of the string as though they were single
+             symbols.  So, if the initially supplied string is
+             A::B::C::D::foo, we have to look up "A", then "A::B",
+             then "A::B::C", then "A::B::C::D", and finally
+             "A::B::C::D::foo" as single, monolithic symbols, because
+             A, B, C or D may be namespaces.
+
+             Note that namespaces can nest only inside other
+             namespaces, and not inside classes.  So we need only
+             consider *prefixes* of the string; there is no need to look up
+             "B::C" separately as a symbol in the previous example. */
+          
+          p2 = p; /* save for restart */
+          while (1)
+            {
+  	     /* Extract the class name.  */
+	     p1 = p;
+	     while (p != *argptr && p[-1] == ' ') --p;
+	     copy = (char *) alloca (p - *argptr + 1);
+	     memcpy (copy, *argptr, p - *argptr);
+	     copy[p - *argptr] = 0;
+
+	     /* Discard the class name from the arg.  */
+	     p = p1 + (p1[0] == ':' ? 2 : 1);
+	     while (*p == ' ' || *p == '\t') p++;
+	     *argptr = p;
+
+	     sym_class = lookup_symbol (copy, 0, STRUCT_NAMESPACE, 0, 
+				        (struct symtab **)NULL);
+       
+	     if (sym_class &&
+	         (t = check_typedef (SYMBOL_TYPE (sym_class)),
+	          (TYPE_CODE (t) == TYPE_CODE_STRUCT
+		   || TYPE_CODE (t) == TYPE_CODE_UNION)))
+	       {
+	         /* Arg token is not digits => try it as a function name
+		    Find the next token(everything up to end or next blank). */
+	         if (**argptr
+		     && strchr (gdb_completer_quote_characters, **argptr) != NULL)
+		   {
+		     p = skip_quoted(*argptr);
+		     *argptr = *argptr + 1;
+		   }
+	         else
+		   {
+	             p = *argptr;
+	             while (*p && *p!=' ' && *p!='\t' && *p!=',' && *p!=':') p++;
+		   }
+/*
+	      q = operator_chars (*argptr, &q1);
+	      if (q1 - q)
+		{
+		  char *opname;
+		  char *tmp = alloca (q1 - q + 1);
+		  memcpy (tmp, q, q1 - q);
+		  tmp[q1 - q] = '\0';
+		  opname = cplus_mangle_opname (tmp, DMGL_ANSI);
+		  if (opname == NULL)
+		    {
+		      error_begin ();
+		      printf_filtered ("no mangling for \"%s\"\n", tmp);
+		      cplusplus_hint (saved_arg);
+		      return_to_top_level (RETURN_ERROR);
+		    }
+		  copy = (char*) alloca (3 + strlen(opname));
+		  sprintf (copy, "__%s", opname);
+		  p = q1;
+		}
+	      else
+*/
+		   {
+		     copy = (char *) alloca (p - *argptr + 1 );
+		     memcpy (copy, *argptr, p - *argptr);
+		     copy[p - *argptr] = '\0';
+		     if (p != *argptr
+		         && copy[p - *argptr - 1]
+		         && strchr (gdb_completer_quote_characters,
+				    copy[p - *argptr - 1]) != NULL)
+		       copy[p - *argptr - 1] = '\0';
+		   }
+
+	         /* no line number may be specified */
+	         while (*p == ' ' || *p == '\t') p++;
+	         *argptr = p;
+
+	         sym = 0;
+	         i1 = 0;		/*  counter for the symbol array */
+	         sym_arr = (struct symbol **) alloca(total_number_of_methods (t)
+						     * sizeof(struct symbol *));
+
+	         if (destructor_name_p (copy, t))
+		   {
+		     /* Destructors are a special case.  */
+		     int m_index, f_index;
+
+		     if (get_destructor_fn_field (t, &m_index, &f_index))
+		       {
+		         struct fn_field *f = TYPE_FN_FIELDLIST1 (t, m_index);
+
+		         sym_arr[i1] =
+			   lookup_symbol (TYPE_FN_FIELD_PHYSNAME (f, f_index),
+				          NULL, VAR_NAMESPACE, (int *) NULL,
+				          (struct symtab **)NULL);
+		         if (sym_arr[i1])
+			   i1++;
+		       }
+		   }
+	         else
+		   i1 = find_methods (t, copy, sym_arr);
+	         if (i1 == 1)
+		   {
+		     /* There is exactly one field with that name.  */
+		     sym = sym_arr[0];
+
+		     if (sym && SYMBOL_CLASS (sym) == LOC_BLOCK)
+		       {
+		         values.sals = (struct symtab_and_line *)
+			   xmalloc (sizeof (struct symtab_and_line));
+		         values.nelts = 1;
+		         values.sals[0] = find_function_start_sal (sym,
+				 				   funfirstline);
+		       }
+		     else
+		       {
+		         values.nelts = 0;
+		       }
+		     return values;
+		   }
+	         if (i1 > 0)
+		   {
+		     /* There is more than one field with that name
+		        (overloaded).  Ask the user which one to use.  */
+		     return decode_line_2 (sym_arr, i1, funfirstline, canonical);
+		   }
+	         else
+		   {
+		     char *tmp;
+
+		     if (OPNAME_PREFIX_P (copy))
+		       {
+		         tmp = (char *)alloca (strlen (copy+3) + 9);
+		         strcpy (tmp, "operator ");
+		         strcat (tmp, copy+3);
+		       }
+		     else
+		       tmp = copy;
+		     error_begin ();
+		     if (tmp[0] == '~')
+		       printf_filtered
+		         ("the class `%s' does not have destructor defined\n",
+		          SYMBOL_SOURCE_NAME(sym_class));
+		     else
+		       printf_filtered
+		         ("the class %s does not have any method named %s\n",
+		          SYMBOL_SOURCE_NAME(sym_class), tmp);
+		     cplusplus_hint (saved_arg);
+		     return_to_top_level (RETURN_ERROR);
+		   }
+	       }
+
+             /* Move pointer up to next possible class/namespace token */
+              p = p2 + 1; /* restart with old value +1 */
+              /* Move pointer ahead to next double-colon */
+              while (*p && (p[0] != ' ') && (p[0] != '\t') && (p[0] != '\'')) {
+                if (p[0] == '<') {
+                  temp_end = find_template_name_end (p);
+                  if (!temp_end)
+                    error ("malformed template specification in command");
+                  p = temp_end;
+                }
+                else if ((p[0] == ':') && (p[1] == ':'))
+                  break; /* found double-colon */
+                else
+                  p++;
+              }
+              
+              if (*p != ':')
+                break; /* out of the while (1) */
+
+              p2 = p; /* save restart for next time around */
+              *argptr = saved_arg2; /* restore argptr */
+            } /* while (1) */
+
+          /* Last chance attempt -- check entire name as a symbol */
+          /* Use "copy" in preparation for jumping out of this block,
+             to be consistent with usage following the jump target */
+          copy = (char *) alloca (p - saved_arg2 + 1);
+          memcpy (copy, saved_arg2, p - saved_arg2);
+          /* Note: if is_quoted should be true, we snuff out quote here anyway */
+          copy[p-saved_arg2] = '\000'; 
+          /* Set argptr to skip over the name */
+          *argptr = (*p == '\'') ? p + 1 : p;
+          /* Look up entire name */
+          sym = lookup_symbol (copy, 0, VAR_NAMESPACE, 0, &sym_symtab);
+          s = (struct symtab *) 0;
+          /* Prepare to jump: restore the " if (condition)" so outer layers see it */
+          if (has_if)
+            *ii = ' ';
+          /* Symbol was found --> jump to normal symbol processing.
+             Code following "symbol_found" expects "copy" to have the
+             symbol name, "sym" to have the symbol pointer, "s" to be
+             a specified file's symtab, and sym_symtab to be the symbol's
+             symtab. */
+          /* By jumping there we avoid falling through the FILE:LINE and
+             FILE:FUNC processing stuff below */
+          if (sym)
+            goto symbol_found;
+
+          /* Couldn't find any interpretation as classes/namespaces, so give up */
+          error_begin ();
+          /* The quotes are important if copy is empty.  */
+          printf_filtered
+            ("Can't find member of namespace, class, struct, or union named \"%s\"\n", copy);
+          cplusplus_hint (saved_arg);
+          return_to_top_level (RETURN_ERROR);
+        }
+      /*  end of C++  */
+
+
+      /* Extract the file name.  */
+      p1 = p;
+      while (p != *argptr && p[-1] == ' ') --p;
+      copy = (char *) alloca (p - *argptr + 1);
+      memcpy (copy, *argptr, p - *argptr);
+      copy[p - *argptr] = 0;
+
+      /* Find that file's data.  */
+      s = lookup_symtab (copy);
+      if (s == 0)
+	{
+	  if (!have_full_symbols () && !have_partial_symbols ())
+	    error (no_symtab_msg);
+	  error ("No source file named %s.", copy);
+	}
+
+      /* Discard the file name from the arg.  */
+      p = p1 + 1;
+      while (*p == ' ' || *p == '\t') p++;
+      *argptr = p;
+    }
+  else {
+    /* Check if what we have till now is a symbol name */
+
+    /* We may be looking at a template instantiation such
+       as "foo<int>".  Check here whether we know about it,
+       instead of falling through to the code below which
+       handles ordinary function names, because that code
+       doesn't like seeing '<' and '>' in a name -- the
+       skip_quoted call doesn't go past them.  So see if we
+       can figure it out right now. */ 
+
+    copy = (char *) alloca (p - *argptr + 1);
+    memcpy (copy, *argptr, p - *argptr);
+    copy[p - *argptr] = '\000';
+    sym = lookup_symbol (copy, 0, VAR_NAMESPACE, 0, &sym_symtab);
+    if (sym) {
+      /* Yes, we have a symbol; jump to symbol processing */
+      /* Code after symbol_found expects S, SYM_SYMTAB, SYM, 
+         and COPY to be set correctly */ 
+      if (has_if)
+        *ii = ' ';
+      *argptr = (*p == '\'') ? p + 1 : p;
+      s = (struct symtab *) 0;
+      goto symbol_found;
+    }
+    /* Otherwise fall out from here and go to file/line spec
+       processing, etc. */ 
+  }
+
+  /* S is specified file's symtab, or 0 if no file specified.
+     arg no longer contains the file name.  */
+
+  /* Check whether arg is all digits (and sign) */
+
+  q = *argptr;
+  if (*q == '-' || *q == '+') q++;
+  while (*q >= '0' && *q <= '9')
+    q++;
+
+  if (q != *argptr && (*q == 0 || *q == ' ' || *q == '\t' || *q == ','))
+    {
+      /* We found a token consisting of all digits -- at least one digit.  */
+      enum sign {none, plus, minus} sign = none;
+
+      /* We might need a canonical line spec if no file was specified.  */
+      int need_canonical = (s == 0) ? 1 : 0;
+
+      /* This is where we need to make sure that we have good defaults.
+	 We must guarantee that this section of code is never executed
+	 when we are called with just a function name, since
+	 select_source_symtab calls us with such an argument  */
+
+      if (s == 0 && default_symtab == 0)
+	{
+	  select_source_symtab (0);
+	  default_symtab = current_source_symtab;
+	  default_line = current_source_line;
+	}
+
+      if (**argptr == '+')
+	sign = plus, (*argptr)++;
+      else if (**argptr == '-')
+	sign = minus, (*argptr)++;
+      val.line = atoi (*argptr);
+      switch (sign)
+	{
+	case plus:
+	  if (q == *argptr)
+	    val.line = 5;
+	  if (s == 0)
+	    val.line = default_line + val.line;
+	  break;
+	case minus:
+	  if (q == *argptr)
+	    val.line = 15;
+	  if (s == 0)
+	    val.line = default_line - val.line;
+	  else
+	    val.line = 1;
+	  break;
+	case none:
+	  break;	/* No need to adjust val.line.  */
+	}
+
+      while (*q == ' ' || *q == '\t') q++;
+      *argptr = q;
+      if (s == 0)
+	s = default_symtab;
+
+      /* It is possible that this source file has more than one symtab, 
+	 and that the new line number specification has moved us from the
+	 default (in s) to a new one.  */
+      val.symtab = find_line_symtab (s, val.line, NULL, NULL);
+      if (val.symtab == 0)
+	val.symtab = s;
+     
+      val.pc = 0;
+      values.sals = (struct symtab_and_line *)
+	xmalloc (sizeof (struct symtab_and_line));
+      values.sals[0] = val;
+      values.nelts = 1;
+      if (need_canonical)
+	build_canonical_line_spec (values.sals, NULL, canonical);
+      return values;
+    }
+
+  /* Arg token is not digits => try it as a variable name
+     Find the next token (everything up to end or next whitespace).  */
+
+  if (**argptr == '$')		/* May be a convenience variable */
+    p = skip_quoted (*argptr + (((*argptr)[1] == '$') ? 2 : 1));  /* One or two $ chars possible */
+  else if (is_quoted)
+    {
+      p = skip_quoted (*argptr);
+      if (p[-1] != '\'')
+        error ("Unmatched single quote.");
+    }
+  else if (has_parens)
+    {
+      p = pp+1;
+    }
+  else 
+    {
+      p = skip_quoted(*argptr);
+    }
+
+  copy = (char *) alloca (p - *argptr + 1);
+  memcpy (copy, *argptr, p - *argptr);
+  copy[p - *argptr] = '\0';
+  if (p != *argptr
+      && copy[0]
+      && copy[0] == copy [p - *argptr - 1]
+      && strchr (gdb_completer_quote_characters, copy[0]) != NULL)
+    {
+      copy [p - *argptr - 1] = '\0';
+      copy++;
+    }
+  while (*p == ' ' || *p == '\t') p++;
+  *argptr = p;
+
+  /* If it starts with $: may be a legitimate variable or routine name
+     (e.g. HP-UX millicode routines such as $$dyncall), or it may
+     be history value, or it may be a convenience variable */ 
+
+  if (*copy == '$')
+    {
+      value_ptr valx;
+      int index = 0;
+      int need_canonical = 0;
+
+      p = (copy[1] == '$') ? copy + 2 : copy + 1;
+      while (*p >= '0' && *p <= '9')
+        p++;
+      if (!*p) /* reached end of token without hitting non-digit */
+        {
+          /* We have a value history reference */
+          sscanf ((copy[1] == '$') ? copy + 2 : copy + 1, "%d", &index);
+          valx = access_value_history ((copy[1] == '$') ? -index : index);
+          if (TYPE_CODE (VALUE_TYPE (valx)) != TYPE_CODE_INT)
+            error ("History values used in line specs must have integer values.");
+        }
+      else 
+        {
+          /* Not all digits -- may be user variable/function or a
+              convenience variable */
+          
+          /* Look up entire name as a symbol first */
+          sym = lookup_symbol (copy, 0, VAR_NAMESPACE, 0, &sym_symtab); 
+          s = (struct symtab *) 0;
+          need_canonical = 1;
+          /* Symbol was found --> jump to normal symbol processing.
+             Code following "symbol_found" expects "copy" to have the
+             symbol name, "sym" to have the symbol pointer, "s" to be
+             a specified file's symtab, and sym_symtab to be the symbol's
+             symtab. */
+          if (sym)
+            goto symbol_found;
+
+          /* If symbol was not found, look in minimal symbol tables */ 
+          msymbol = lookup_minimal_symbol (copy, 0, 0);
+          /* Min symbol was found --> jump to minsym processing. */ 
+          if (msymbol)
+            goto minimal_symbol_found;
+          
+          /* Not a user variable or function -- must be convenience variable */
+          need_canonical = (s == 0) ? 1 : 0;
+          valx = value_of_internalvar (lookup_internalvar (copy + 1));
+          if (TYPE_CODE (VALUE_TYPE (valx)) != TYPE_CODE_INT)
+            error ("Convenience variables used in line specs must have integer values.");
+        }
+
+      /* Either history value or convenience value from above, in valx */ 
+      val.symtab = s ? s : default_symtab;
+      val.line = value_as_long (valx);
+      val.pc = 0;
+
+      values.sals = (struct symtab_and_line *)xmalloc (sizeof val);
+      values.sals[0] = val;
+      values.nelts = 1;
+
+      if (need_canonical)
+	build_canonical_line_spec (values.sals, NULL, canonical);
+
+      return values;
+    }
+
+
+  /* Look up that token as a variable.
+     If file specified, use that file's per-file block to start with.  */
+
+  sym = lookup_symbol (copy,
+		       (s ? BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK)
+			: get_selected_block ()),
+		       VAR_NAMESPACE, 0, &sym_symtab);
+  
+symbol_found:   /* We also jump here from inside the C++ class/namespace 
+                   code on finding a symbol of the form "A::B::C" */
+
+  if (sym != NULL)
+    {
+      if (SYMBOL_CLASS (sym) == LOC_BLOCK)
+	{
+	  /* Arg is the name of a function */
+	  values.sals = (struct symtab_and_line *)
+	    xmalloc (sizeof (struct symtab_and_line));
+	  values.sals[0] = find_function_start_sal (sym, funfirstline);
+	  values.nelts = 1;
+
+	  /* Don't use the SYMBOL_LINE; if used at all it points to
+	     the line containing the parameters or thereabouts, not
+	     the first line of code.  */
+
+	  /* We might need a canonical line spec if it is a static
+	     function.  */
+	  if (s == 0)
+	    {
+	      struct blockvector *bv = BLOCKVECTOR (sym_symtab);
+	      struct block *b = BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK);
+	      if (lookup_block_symbol (b, copy, VAR_NAMESPACE) != NULL)
+		build_canonical_line_spec (values.sals, copy, canonical);
+	    }
+	  return values;
+	}
+      else
+	{
+	  if (funfirstline)
+	    error ("\"%s\" is not a function", copy);
+	  else if (SYMBOL_LINE (sym) != 0)
+	    {
+	      /* We know its line number.  */
+	      values.sals = (struct symtab_and_line *)
+		xmalloc (sizeof (struct symtab_and_line));
+	      values.nelts = 1;
+	      memset (&values.sals[0], 0, sizeof (values.sals[0]));
+	      values.sals[0].symtab = sym_symtab;
+	      values.sals[0].line = SYMBOL_LINE (sym);
+	      return values;
+	    }
+	  else
+	    /* This can happen if it is compiled with a compiler which doesn't
+	       put out line numbers for variables.  */
+	    /* FIXME: Shouldn't we just set .line and .symtab to zero
+	       and return?  For example, "info line foo" could print
+	       the address.  */
+	    error ("Line number not known for symbol \"%s\"", copy);
+	}
+    }
+
+  msymbol = lookup_minimal_symbol (copy, NULL, NULL);
+
+minimal_symbol_found: /* We also jump here from the case for variables
+                         that begin with '$' */
+  
+  if (msymbol != NULL)
+    {
+      values.sals = (struct symtab_and_line *)
+	xmalloc (sizeof (struct symtab_and_line));
+      values.sals[0] = find_pc_sect_line ( SYMBOL_VALUE_ADDRESS (msymbol), 
+					   (struct sec *)0,0 );
+      values.sals[0].section = SYMBOL_BFD_SECTION (msymbol);
+      if (funfirstline)
+	{
+	  values.sals[0].pc += FUNCTION_START_OFFSET;
+	  SKIP_PROLOGUE (values.sals[0].pc);
+	}
+      values.nelts = 1;
+      return values;
+    }
+
+  if (!have_full_symbols () &&
+      !have_partial_symbols () && !have_minimal_symbols ())
+    error (no_symtab_msg);
+
+  error ("Function \"%s\" not defined.", copy);
+  return values;	/* for lint */
+}
+
+struct symtabs_and_lines
+decode_line_spec (string, funfirstline)
+     char *string;
+     int funfirstline;
+{
+  struct symtabs_and_lines sals;
+  if (string == 0)
+    error ("Empty line specification.");
+  sals = decode_line_1 (&string, funfirstline,
+			current_source_symtab, current_source_line,
+			(char ***)NULL);
+  if (*string)
+    error ("Junk at end of line specification: %s", string);
+  return sals;
+}
+
+/* Given a list of NELTS symbols in SYM_ARR, return a list of lines to
+   operate on (ask user if necessary).
+   If CANONICAL is non-NULL return a corresponding array of mangled names
+   as canonical line specs there.  */
+
+static struct symtabs_and_lines
+decode_line_2 (sym_arr, nelts, funfirstline, canonical)
+     struct symbol *sym_arr[];
+     int nelts;
+     int funfirstline;
+     char ***canonical;
+{
+  struct symtabs_and_lines values, return_values;
+  char *args, *arg1;
+  int i;
+  char *prompt;
+  char *symname;
+  struct cleanup *old_chain;
+  char **canonical_arr = (char **)NULL;
+
+  values.sals = (struct symtab_and_line *) 
+    alloca (nelts * sizeof(struct symtab_and_line));
+  return_values.sals = (struct symtab_and_line *) 
+    xmalloc (nelts * sizeof(struct symtab_and_line));
+  old_chain = make_cleanup (free, return_values.sals);
+
+  if (canonical)
+    {
+      canonical_arr = (char **) xmalloc (nelts * sizeof (char *));
+      make_cleanup (free, canonical_arr);
+      memset (canonical_arr, 0, nelts * sizeof (char *));
+      *canonical = canonical_arr;
+    }
+
+  i = 0;
+  printf_unfiltered("[0] cancel\n[1] all\n");
+  while (i < nelts)
+    {
+      INIT_SAL (&return_values.sals[i]);	/* initialize to zeroes */
+      INIT_SAL (&values.sals[i]);
+      if (sym_arr[i] && SYMBOL_CLASS (sym_arr[i]) == LOC_BLOCK)
+	{
+	  values.sals[i] = find_function_start_sal (sym_arr[i], funfirstline);
+	  printf_unfiltered ("[%d] %s at %s:%d\n",
+			     (i+2),
+			     SYMBOL_SOURCE_NAME (sym_arr[i]),
+			     values.sals[i].symtab->filename,
+			     values.sals[i].line);
+	}
+      else
+	printf_unfiltered ("?HERE\n");
+      i++;
+    }
+  
+  if ((prompt = getenv ("PS2")) == NULL)
+    {
+      prompt = "> ";
+    }
+  args = command_line_input (prompt, 0, "overload-choice");
+  
+  if (args == 0 || *args == 0)
+    error_no_arg ("one or more choice numbers");
+
+  i = 0;
+  while (*args)
+    {
+      int num;
+
+      arg1 = args;
+      while (*arg1 >= '0' && *arg1 <= '9') arg1++;
+      if (*arg1 && *arg1 != ' ' && *arg1 != '\t')
+	error ("Arguments must be choice numbers.");
+
+      num = atoi (args);
+
+      if (num == 0)
+	error ("cancelled");
+      else if (num == 1)
+	{
+	  if (canonical_arr)
+	    {
+	      for (i = 0; i < nelts; i++)
+		{
+	          if (canonical_arr[i] == NULL)
+		    {
+		      symname = SYMBOL_NAME (sym_arr[i]);
+	              canonical_arr[i] = savestring (symname, strlen (symname));
+		    }
+		}
+	    }
+	  memcpy (return_values.sals, values.sals,
+		  (nelts * sizeof(struct symtab_and_line)));
+	  return_values.nelts = nelts;
+	  discard_cleanups (old_chain);
+	  return return_values;
+	}
+
+      if (num >= nelts + 2)
+	{
+	  printf_unfiltered ("No choice number %d.\n", num);
+	}
+      else
+	{
+	  num -= 2;
+	  if (values.sals[num].pc)
+	    {
+	      if (canonical_arr)
+		{
+		  symname = SYMBOL_NAME (sym_arr[num]);
+		  make_cleanup (free, symname);
+		  canonical_arr[i] = savestring (symname, strlen (symname));
+		}
+	      return_values.sals[i++] = values.sals[num];
+	      values.sals[num].pc = 0;
+	    }
+	  else
+	    {
+	      printf_unfiltered ("duplicate request for %d ignored.\n", num);
+	    }
+	}
+
+      args = arg1;
+      while (*args == ' ' || *args == '\t') args++;
+    }
+  return_values.nelts = i;
+  discard_cleanups (old_chain);
+  return return_values;
+}
+
+
+/* Slave routine for sources_info.  Force line breaks at ,'s.
+   NAME is the name to print and *FIRST is nonzero if this is the first
+   name printed.  Set *FIRST to zero.  */
+static void
+output_source_filename (name, first)
+     char *name;
+     int *first;
+{
+  /* Table of files printed so far.  Since a single source file can
+     result in several partial symbol tables, we need to avoid printing
+     it more than once.  Note: if some of the psymtabs are read in and
+     some are not, it gets printed both under "Source files for which
+     symbols have been read" and "Source files for which symbols will
+     be read in on demand".  I consider this a reasonable way to deal
+     with the situation.  I'm not sure whether this can also happen for
+     symtabs; it doesn't hurt to check.  */
+  static char **tab = NULL;
+  /* Allocated size of tab in elements.
+     Start with one 256-byte block (when using GNU malloc.c).
+     24 is the malloc overhead when range checking is in effect.  */
+  static int tab_alloc_size = (256 - 24) / sizeof (char *);
+  /* Current size of tab in elements.  */
+  static int tab_cur_size;
+
+  char **p;
+
+  if (*first)
+    {
+      if (tab == NULL)
+	tab = (char **) xmalloc (tab_alloc_size * sizeof (*tab));
+      tab_cur_size = 0;
+    }
+
+  /* Is NAME in tab?  */
+  for (p = tab; p < tab + tab_cur_size; p++)
+    if (STREQ (*p, name))
+      /* Yes; don't print it again.  */
+      return;
+  /* No; add it to tab.  */
+  if (tab_cur_size == tab_alloc_size)
+    {
+      tab_alloc_size *= 2;
+      tab = (char **) xrealloc ((char *) tab, tab_alloc_size * sizeof (*tab));
+    }
+  tab[tab_cur_size++] = name;
+
+  if (*first)
+    {
+      *first = 0;
+    }
+  else
+    {
+      printf_filtered (", ");
+    }
+
+  wrap_here ("");
+  fputs_filtered (name, gdb_stdout);
+}  
+
+static void
+sources_info (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct symtab *s;
+  register struct partial_symtab *ps;
+  register struct objfile *objfile;
+  int first;
+  
+  if (!have_full_symbols () && !have_partial_symbols ())
+    {
+      error (no_symtab_msg);
+    }
+  
+  printf_filtered ("Source files for which symbols have been read in:\n\n");
+
+  first = 1;
+  ALL_SYMTABS (objfile, s)
+    {
+      output_source_filename (s -> filename, &first);
+    }
+  printf_filtered ("\n\n");
+  
+  printf_filtered ("Source files for which symbols will be read in on demand:\n\n");
+
+  first = 1;
+  ALL_PSYMTABS (objfile, ps)
+    {
+      if (!ps->readin)
+	{
+	  output_source_filename (ps -> filename, &first);
+	}
+    }
+  printf_filtered ("\n");
+}
+
+static int
+file_matches (file, files, nfiles)
+     char *file;
+     char *files[];
+     int nfiles;
+{
+  int i;
+
+  if (file != NULL && nfiles != 0)
+    {
+      for (i = 0; i < nfiles; i++)
+        {
+          if (strcmp (files[i], basename (file)) == 0)
+            return 1;
+        }
+    }
+  else if (nfiles == 0)
+    return 1;
+  return 0;
+}
+
+/* Free any memory associated with a search. */
+void
+free_search_symbols (symbols)
+     struct symbol_search *symbols;
+{
+  struct symbol_search *p;
+  struct symbol_search *next;
+
+  for (p = symbols; p != NULL; p = next)
+    {
+      next = p->next;
+      free (p);
+    }
+}
+
+/* Search the symbol table for matches to the regular expression REGEXP,
+   returning the results in *MATCHES.
+
+   Only symbols of KIND are searched:
+     FUNCTIONS_NAMESPACE - search all functions
+     TYPES_NAMESPACE     - search all type names
+     METHODS_NAMESPACE   - search all methods NOT IMPLEMENTED
+     VARIABLES_NAMESPACE - search all symbols, excluding functions, type names,
+                         and constants (enums)
+
+   free_search_symbols should be called when *MATCHES is no longer needed.
+*/
+void
+search_symbols (regexp, kind, nfiles, files, matches)
+     char *regexp;
+     namespace_enum kind;
+     int nfiles;
+     char *files[];
+     struct symbol_search **matches;
+     
+{
+  register struct symtab *s;
+  register struct partial_symtab *ps;
+  register struct blockvector *bv;
+  struct blockvector *prev_bv = 0;
+  register struct block *b;
+  register int i = 0;
+  register int j;
+  register struct symbol *sym;
+  struct partial_symbol **psym;
+  struct objfile *objfile;
+  struct minimal_symbol *msymbol;
+  char *val;
+  int found_misc = 0;
+  static enum minimal_symbol_type types[]
+    = {mst_data, mst_text, mst_abs, mst_unknown};
+  static enum minimal_symbol_type types2[]
+    = {mst_bss,  mst_file_text, mst_abs, mst_unknown};
+  static enum minimal_symbol_type types3[]
+    = {mst_file_data,  mst_solib_trampoline, mst_abs, mst_unknown};
+  static enum minimal_symbol_type types4[]
+    = {mst_file_bss,   mst_text, mst_abs, mst_unknown};
+  enum minimal_symbol_type ourtype;
+  enum minimal_symbol_type ourtype2;
+  enum minimal_symbol_type ourtype3;
+  enum minimal_symbol_type ourtype4;
+  struct symbol_search *sr;
+  struct symbol_search *psr;
+  struct symbol_search *tail;
+  struct cleanup *old_chain = NULL;
+
+  if (kind < LABEL_NAMESPACE)
+    error ("must search on specific namespace");
+
+  ourtype = types[(int) (kind - LABEL_NAMESPACE)];
+  ourtype2 = types2[(int) (kind - LABEL_NAMESPACE)];
+  ourtype3 = types3[(int) (kind - LABEL_NAMESPACE)];
+  ourtype4 = types4[(int) (kind - LABEL_NAMESPACE)];
+
+  sr = *matches = NULL;
+  tail = NULL;
+
+  if (regexp != NULL)
+    {
+      /* Make sure spacing is right for C++ operators.
+         This is just a courtesy to make the matching less sensitive
+         to how many spaces the user leaves between 'operator'
+         and <TYPENAME> or <OPERATOR>. */
+      char *opend;
+      char *opname = operator_chars (regexp, &opend);
+      if (*opname)
+        {
+          int fix = -1; /* -1 means ok; otherwise number of spaces needed. */
+          if (isalpha(*opname) || *opname == '_' || *opname == '$')
+            {
+              /* There should 1 space between 'operator' and 'TYPENAME'. */
+              if (opname[-1] != ' ' || opname[-2] == ' ')
+                fix = 1;
+            }
+          else
+            {
+              /* There should 0 spaces between 'operator' and 'OPERATOR'. */
+              if (opname[-1] == ' ')
+                fix = 0;
+            }
+          /* If wrong number of spaces, fix it. */
+          if (fix >= 0)
+            {
+              char *tmp = (char*) alloca(opend-opname+10);
+              sprintf(tmp, "operator%.*s%s", fix, " ", opname);
+              regexp = tmp;
+            }
+        }
+      
+      if (0 != (val = re_comp (regexp)))
+        error ("Invalid regexp (%s): %s", val, regexp);
+    }
+
+  /* Search through the partial symtabs *first* for all symbols
+     matching the regexp.  That way we don't have to reproduce all of
+     the machinery below. */
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      struct partial_symbol **bound, **gbound, **sbound;
+      int keep_going = 1;
+
+      if (ps->readin) continue;
+
+      gbound = objfile->global_psymbols.list + ps->globals_offset + ps->n_global_syms;
+      sbound = objfile->static_psymbols.list + ps->statics_offset + ps->n_static_syms;
+      bound = gbound;
+      
+      /* Go through all of the symbols stored in a partial
+         symtab in one loop. */
+      psym = objfile->global_psymbols.list + ps->globals_offset;
+      while (keep_going)
+        {
+          if (psym >= bound)
+            {
+              if (bound == gbound && ps->n_static_syms != 0)
+                {
+                  psym = objfile->static_psymbols.list + ps->statics_offset;
+                  bound = sbound;
+                }
+              else
+                keep_going = 0;
+              continue;
+            }
+          else
+            {
+              QUIT;
+
+              /* If it would match (logic taken from loop below)
+                 load the file and go on to the next one */
+              if (file_matches (ps->filename, files, nfiles)
+                  && ((regexp == NULL || SYMBOL_MATCHES_REGEXP (*psym))
+                      && ((kind == VARIABLES_NAMESPACE && SYMBOL_CLASS (*psym) != LOC_TYPEDEF
+                           && SYMBOL_CLASS (*psym) != LOC_BLOCK)
+                          || (kind == FUNCTIONS_NAMESPACE && SYMBOL_CLASS (*psym) == LOC_BLOCK)
+                          || (kind == TYPES_NAMESPACE && SYMBOL_CLASS (*psym) == LOC_TYPEDEF)
+                          || (kind == METHODS_NAMESPACE && SYMBOL_CLASS (*psym) == LOC_BLOCK))))
+                {
+                  PSYMTAB_TO_SYMTAB(ps);
+                  keep_going = 0;
+                }
+            }
+          psym++;
+        }
+    }
+
+  /* Here, we search through the minimal symbol tables for functions
+     and variables that match, and force their symbols to be read.
+     This is in particular necessary for demangled variable names,
+     which are no longer put into the partial symbol tables.
+     The symbol will then be found during the scan of symtabs below.
+
+     For functions, find_pc_symtab should succeed if we have debug info
+     for the function, for variables we have to call lookup_symbol
+     to determine if the variable has debug info.
+     If the lookup fails, set found_misc so that we will rescan to print
+     any matching symbols without debug info.
+  */
+
+  if (nfiles == 0 && (kind == VARIABLES_NAMESPACE || kind == FUNCTIONS_NAMESPACE))
+    {
+      ALL_MSYMBOLS (objfile, msymbol)
+        {
+          if (MSYMBOL_TYPE (msymbol) == ourtype ||
+              MSYMBOL_TYPE (msymbol) == ourtype2 ||
+              MSYMBOL_TYPE (msymbol) == ourtype3 ||
+              MSYMBOL_TYPE (msymbol) == ourtype4)
+            {
+              if (regexp == NULL || SYMBOL_MATCHES_REGEXP (msymbol))
+                {
+                  if (0 == find_pc_symtab (SYMBOL_VALUE_ADDRESS (msymbol)))
+                    {
+                      if (kind == FUNCTIONS_NAMESPACE
+                          || lookup_symbol (SYMBOL_NAME (msymbol), 
+                                            (struct block *) NULL,
+                                            VAR_NAMESPACE,
+                                            0, (struct symtab **) NULL) == NULL)
+                        found_misc = 1;
+                    }
+                }
+            }
+        }
+    }
+
+  ALL_SYMTABS (objfile, s)
+    {
+      bv = BLOCKVECTOR (s);
+      /* Often many files share a blockvector.
+         Scan each blockvector only once so that
+         we don't get every symbol many times.
+         It happens that the first symtab in the list
+         for any given blockvector is the main file.  */
+      if (bv != prev_bv)
+        for (i = GLOBAL_BLOCK; i <= STATIC_BLOCK; i++)
+          {
+            b = BLOCKVECTOR_BLOCK (bv, i);
+            /* Skip the sort if this block is always sorted.  */
+            if (!BLOCK_SHOULD_SORT (b))
+              sort_block_syms (b);
+            for (j = 0; j < BLOCK_NSYMS (b); j++)
+              {
+                QUIT;
+                sym = BLOCK_SYM (b, j);
+                if (file_matches (s->filename, files, nfiles)
+                    && ((regexp == NULL || SYMBOL_MATCHES_REGEXP (sym))
+                        && ((kind == VARIABLES_NAMESPACE && SYMBOL_CLASS (sym) != LOC_TYPEDEF
+                             && SYMBOL_CLASS (sym) != LOC_BLOCK
+                             && SYMBOL_CLASS (sym) != LOC_CONST)
+                            || (kind == FUNCTIONS_NAMESPACE && SYMBOL_CLASS (sym) == LOC_BLOCK)
+                            || (kind == TYPES_NAMESPACE && SYMBOL_CLASS (sym) == LOC_TYPEDEF)
+                            || (kind == METHODS_NAMESPACE && SYMBOL_CLASS (sym) == LOC_BLOCK))))
+                  {
+                    /* match */
+                    psr = (struct symbol_search *) xmalloc (sizeof (struct symbol_search));
+                    psr->block = i;
+                    psr->symtab = s;
+                    psr->symbol = sym;
+                    psr->msymbol = NULL;
+                    psr->next = NULL;
+                    if (tail == NULL)
+                      {
+                        sr = psr;
+                        old_chain = make_cleanup ((make_cleanup_func) 
+                                                  free_search_symbols, sr);
+                      }
+                    else
+                      tail->next = psr;
+                    tail = psr;
+                  }
+              }
+          }
+      prev_bv = bv;
+    }
+
+  /* If there are no eyes, avoid all contact.  I mean, if there are
+     no debug symbols, then print directly from the msymbol_vector.  */
+
+  if (found_misc || kind != FUNCTIONS_NAMESPACE)
+    {
+      ALL_MSYMBOLS (objfile, msymbol)
+        {
+          if (MSYMBOL_TYPE (msymbol) == ourtype ||
+              MSYMBOL_TYPE (msymbol) == ourtype2 ||
+              MSYMBOL_TYPE (msymbol) == ourtype3 ||
+              MSYMBOL_TYPE (msymbol) == ourtype4)
+            {
+              if (regexp == NULL || SYMBOL_MATCHES_REGEXP (msymbol))
+                {
+                  /* Functions:  Look up by address. */
+                  if (kind != FUNCTIONS_NAMESPACE ||
+                      (0 == find_pc_symtab (SYMBOL_VALUE_ADDRESS (msymbol))))
+                    {
+                      /* Variables/Absolutes:  Look up by name */
+                      if (lookup_symbol (SYMBOL_NAME (msymbol), 
+                                         (struct block *) NULL, VAR_NAMESPACE,
+                                         0, (struct symtab **) NULL) == NULL)
+                        {
+                          /* match */
+                          psr = (struct symbol_search *) xmalloc (sizeof (struct symbol_search));
+                          psr->block = i;
+                          psr->msymbol = msymbol;
+                          psr->symtab  = NULL;
+                          psr->symbol  = NULL;
+                          psr->next = NULL;
+                          if (tail == NULL)
+                            {
+                              sr = psr;
+                              old_chain = make_cleanup ((make_cleanup_func) 
+                                                      free_search_symbols, &sr);
+                            }
+                          else
+                            tail->next = psr;
+                          tail = psr;
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+  *matches = sr;
+  if (sr != NULL)
+    discard_cleanups (old_chain);
+}
+
+/* Helper function for symtab_symbol_info, this function uses
+   the data returned from search_symbols() to print information
+   regarding the match to gdb_stdout.
+*/
+static void
+print_symbol_info (kind, s, sym, block, last)
+     namespace_enum kind;
+     struct symtab *s;
+     struct symbol *sym;
+     int block;
+     char *last;
+{
+  if (last == NULL || strcmp (last, s->filename) != 0)
+    {
+      fputs_filtered ("\nFile ", gdb_stdout);
+      fputs_filtered (s->filename, gdb_stdout);
+      fputs_filtered (":\n", gdb_stdout);
+    }
+
+  if (kind != TYPES_NAMESPACE && block == STATIC_BLOCK)
+    printf_filtered ("static ");
+	    
+  /* Typedef that is not a C++ class */
+  if (kind == TYPES_NAMESPACE
+      && SYMBOL_NAMESPACE (sym) != STRUCT_NAMESPACE)
+    c_typedef_print (SYMBOL_TYPE(sym), sym, gdb_stdout);
+  /* variable, func, or typedef-that-is-c++-class */
+  else if (kind < TYPES_NAMESPACE || 
+           (kind == TYPES_NAMESPACE && 
+            SYMBOL_NAMESPACE(sym) == STRUCT_NAMESPACE))
+    {
+      type_print (SYMBOL_TYPE (sym),
+                  (SYMBOL_CLASS (sym) == LOC_TYPEDEF
+                   ? "" : SYMBOL_SOURCE_NAME (sym)),
+                  gdb_stdout, 0);
+
+      printf_filtered (";\n");
+    }
+  else
+    {
+# if 0
+      /* Tiemann says: "info methods was never implemented."  */
+      char *demangled_name;
+      c_type_print_base (TYPE_FN_FIELD_TYPE(t, block),
+                         gdb_stdout, 0, 0); 
+      c_type_print_varspec_prefix (TYPE_FN_FIELD_TYPE(t, block),
+                                   gdb_stdout, 0); 
+      if (TYPE_FN_FIELD_STUB (t, block))
+        check_stub_method (TYPE_DOMAIN_TYPE (type), j, block);
+      demangled_name =
+        cplus_demangle (TYPE_FN_FIELD_PHYSNAME (t, block),
+                        DMGL_ANSI | DMGL_PARAMS);
+      if (demangled_name == NULL)
+        fprintf_filtered (stream, "<badly mangled name %s>",
+                          TYPE_FN_FIELD_PHYSNAME (t, block));
+      else
+        {
+          fputs_filtered (demangled_name, stream);
+          free (demangled_name);
+        }
+# endif
+    }
+}
+
+/* This help function for symtab_symbol_info() prints information
+   for non-debugging symbols to gdb_stdout.
+*/
+static void
+print_msymbol_info (msymbol)
+     struct minimal_symbol *msymbol;
+{
+  printf_filtered ("	%08lx  %s\n",
+                   (unsigned long) SYMBOL_VALUE_ADDRESS (msymbol),
+                   SYMBOL_SOURCE_NAME (msymbol));
+}
+
+/* This is the guts of the commands "info functions", "info types", and
+   "info variables". It calls search_symbols to find all matches and then
+   print_[m]symbol_info to print out some useful information about the
+   matches.
+*/
+static void
+symtab_symbol_info (regexp, kind, from_tty)
+     char *regexp;
+     namespace_enum kind;
+     int   from_tty;
+{
+  static char *classnames[]
+    = {"variable", "function", "type", "method"};
+  struct symbol_search *symbols;
+  struct symbol_search *p;
+  struct cleanup *old_chain;
+  char *last_filename = NULL;
+  int first = 1;
+
+  /* must make sure that if we're interrupted, symbols gets freed */
+  search_symbols (regexp, kind, 0, (char **) NULL, &symbols);
+  old_chain = make_cleanup ((make_cleanup_func) free_search_symbols, symbols);
+
+  printf_filtered (regexp
+                   ? "All %ss matching regular expression \"%s\":\n"
+                   : "All defined %ss:\n",
+                   classnames[(int) (kind - LABEL_NAMESPACE - 1)], regexp);
+
+  for (p = symbols; p != NULL; p = p->next)
+    {
+      QUIT;
+
+      if (p->msymbol != NULL)
+        {
+          if (first)
+            {
+              printf_filtered ("\nNon-debugging symbols:\n");
+              first = 0;
+            }
+          print_msymbol_info (p->msymbol);
+        }
+      else
+        {
+          print_symbol_info (kind,
+                             p->symtab,
+                             p->symbol,
+                             p->block,
+                             last_filename);
+          last_filename = p->symtab->filename;
+        }
+    }
+
+  do_cleanups (old_chain);
+}
+
+static void
+variables_info (regexp, from_tty)
+     char *regexp;
+     int from_tty;
+{
+  symtab_symbol_info (regexp, VARIABLES_NAMESPACE, from_tty);
+}
+
+static void
+functions_info (regexp, from_tty)
+     char *regexp;
+     int from_tty;
+{
+  symtab_symbol_info (regexp, FUNCTIONS_NAMESPACE, from_tty);
+}
+
+static void
+types_info (regexp, from_tty)
+     char *regexp;
+     int from_tty;
+{
+  symtab_symbol_info (regexp, TYPES_NAMESPACE, from_tty);
+}
+
+#if 0
+/* Tiemann says: "info methods was never implemented."  */
+static void
+methods_info (regexp)
+     char *regexp;
+{
+  symtab_symbol_info (regexp, METHODS_NAMESPACE, 0, from_tty);
+}
+#endif /* 0 */
+
+/* Breakpoint all functions matching regular expression. */
+static void
+rbreak_command (regexp, from_tty)
+     char *regexp;
+     int from_tty;
+{
+  struct symbol_search *ss;
+  struct symbol_search *p;
+  struct cleanup *old_chain;
+
+  search_symbols (regexp, FUNCTIONS_NAMESPACE, 0, (char **) NULL, &ss);
+  old_chain = make_cleanup ((make_cleanup_func) free_search_symbols, ss);
+
+  for (p = ss; p != NULL; p = p->next)
+    {
+      if (p->msymbol == NULL)
+        {
+          char *string = (char *) alloca (strlen (p->symtab->filename)
+                                          + strlen (SYMBOL_NAME (p->symbol))
+                                          + 4);
+          strcpy (string, p->symtab->filename);
+          strcat (string, ":'");
+          strcat (string, SYMBOL_NAME (p->symbol));
+          strcat (string, "'");
+          break_command (string, from_tty);
+          print_symbol_info (FUNCTIONS_NAMESPACE,
+                             p->symtab,
+                             p->symbol,
+                             p->block,
+                             p->symtab->filename);
+        }
+      else
+        {
+          break_command (SYMBOL_NAME (p->msymbol), from_tty);
+          printf_filtered ("<function, no debug info> %s;\n",
+                           SYMBOL_SOURCE_NAME (p->msymbol));
+        }
+    }
+
+  do_cleanups (old_chain);
+}
+
+
+/* Return Nonzero if block a is lexically nested within block b,
+   or if a and b have the same pc range.
+   Return zero otherwise. */
+int
+contained_in (a, b)
+     struct block *a, *b;
+{
+  if (!a || !b)
+    return 0;
+  return BLOCK_START (a) >= BLOCK_START (b)
+      && BLOCK_END (a)   <= BLOCK_END (b);
+}
+
+
+/* Helper routine for make_symbol_completion_list.  */
+
+static int return_val_size;
+static int return_val_index;
+static char **return_val;
+
+#define COMPLETION_LIST_ADD_SYMBOL(symbol, sym_text, len, text, word) \
+  do { \
+    if (SYMBOL_DEMANGLED_NAME (symbol) != NULL) \
+      /* Put only the mangled name on the list.  */ \
+      /* Advantage:  "b foo<TAB>" completes to "b foo(int, int)" */ \
+      /* Disadvantage:  "b foo__i<TAB>" doesn't complete.  */ \
+      completion_list_add_name \
+	(SYMBOL_DEMANGLED_NAME (symbol), (sym_text), (len), (text), (word)); \
+    else \
+      completion_list_add_name \
+	(SYMBOL_NAME (symbol), (sym_text), (len), (text), (word)); \
+  } while (0)
+
+/*  Test to see if the symbol specified by SYMNAME (which is already
+    demangled for C++ symbols) matches SYM_TEXT in the first SYM_TEXT_LEN
+    characters.  If so, add it to the current completion list. */
+
+static void
+completion_list_add_name (symname, sym_text, sym_text_len, text, word)
+     char *symname;
+     char *sym_text;
+     int sym_text_len;
+     char *text;
+     char *word;
+{
+  int newsize;
+  int i;
+
+  /* clip symbols that cannot match */
+
+  if (strncmp (symname, sym_text, sym_text_len) != 0)
+    {
+      return;
+    }
+
+  /* Clip any symbol names that we've already considered.  (This is a
+     time optimization)  */
+
+  for (i = 0; i < return_val_index; ++i)
+    {
+      if (STREQ (symname, return_val[i]))
+	{
+	  return;
+	}
+    }
+  
+  /* We have a match for a completion, so add SYMNAME to the current list
+     of matches. Note that the name is moved to freshly malloc'd space. */
+
+  {
+    char *new;
+    if (word == sym_text)
+      {
+	new = xmalloc (strlen (symname) + 5);
+	strcpy (new, symname);
+      }
+    else if (word > sym_text)
+      {
+	/* Return some portion of symname.  */
+	new = xmalloc (strlen (symname) + 5);
+	strcpy (new, symname + (word - sym_text));
+      }
+    else
+      {
+	/* Return some of SYM_TEXT plus symname.  */
+	new = xmalloc (strlen (symname) + (sym_text - word) + 5);
+	strncpy (new, word, sym_text - word);
+	new[sym_text - word] = '\0';
+	strcat (new, symname);
+      }
+
+    /* Recheck for duplicates if we intend to add a modified symbol.  */
+    if (word != sym_text)
+      {
+	for (i = 0; i < return_val_index; ++i)
+	  {
+	    if (STREQ (new, return_val[i]))
+	      {
+		free (new);
+		return;
+	      }
+	  }
+      }
+
+    if (return_val_index + 3 > return_val_size)
+      {
+	newsize = (return_val_size *= 2) * sizeof (char *);
+	return_val = (char **) xrealloc ((char *) return_val, newsize);
+      }
+    return_val[return_val_index++] = new;
+    return_val[return_val_index] = NULL;
+  }
+}
+
+/* Return a NULL terminated array of all symbols (regardless of class) which
+   begin by matching TEXT.  If the answer is no symbols, then the return value
+   is an array which contains only a NULL pointer.
+
+   Problem: All of the symbols have to be copied because readline frees them.
+   I'm not going to worry about this; hopefully there won't be that many.  */
+
+char **
+make_symbol_completion_list (text, word)
+     char *text;
+     char *word;
+{
+  register struct symbol *sym;
+  register struct symtab *s;
+  register struct partial_symtab *ps;
+  register struct minimal_symbol *msymbol;
+  register struct objfile *objfile;
+  register struct block *b, *surrounding_static_block = 0;
+  register int i, j;
+  struct partial_symbol **psym;
+  /* The symbol we are completing on.  Points in same buffer as text.  */
+  char *sym_text;
+  /* Length of sym_text.  */
+  int sym_text_len;
+
+  /* Now look for the symbol we are supposed to complete on.
+     FIXME: This should be language-specific.  */
+  {
+    char *p;
+    char quote_found;
+    char *quote_pos = NULL;
+
+    /* First see if this is a quoted string.  */
+    quote_found = '\0';
+    for (p = text; *p != '\0'; ++p)
+      {
+	if (quote_found != '\0')
+	  {
+	    if (*p == quote_found)
+	      /* Found close quote.  */
+	      quote_found = '\0';
+	    else if (*p == '\\' && p[1] == quote_found)
+	      /* A backslash followed by the quote character
+		 doesn't end the string.  */
+	      ++p;
+	  }
+	else if (*p == '\'' || *p == '"')
+	  {
+	    quote_found = *p;
+	    quote_pos = p;
+	  }
+      }
+    if (quote_found == '\'')
+      /* A string within single quotes can be a symbol, so complete on it.  */
+      sym_text = quote_pos + 1;
+    else if (quote_found == '"')
+      /* A double-quoted string is never a symbol, nor does it make sense
+	 to complete it any other way.  */
+      return NULL;
+    else
+      {
+	/* It is not a quoted string.  Break it based on the characters
+	   which are in symbols.  */
+	while (p > text)
+	  {
+	    if (isalnum (p[-1]) || p[-1] == '_' || p[-1] == '\0')
+	      --p;
+	    else
+	      break;
+	  }
+	sym_text = p;
+      }
+  }
+
+  sym_text_len = strlen (sym_text);
+
+  return_val_size = 100;
+  return_val_index = 0;
+  return_val = (char **) xmalloc ((return_val_size + 1) * sizeof (char *));
+  return_val[0] = NULL;
+
+  /* Look through the partial symtabs for all symbols which begin
+     by matching SYM_TEXT.  Add each one that you find to the list.  */
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      /* If the psymtab's been read in we'll get it when we search
+	 through the blockvector.  */
+      if (ps->readin) continue;
+      
+      for (psym = objfile->global_psymbols.list + ps->globals_offset;
+	   psym < (objfile->global_psymbols.list + ps->globals_offset
+		   + ps->n_global_syms);
+	   psym++)
+	{
+	  /* If interrupted, then quit. */
+	  QUIT;
+	  COMPLETION_LIST_ADD_SYMBOL (*psym, sym_text, sym_text_len, text, word);
+	}
+      
+      for (psym = objfile->static_psymbols.list + ps->statics_offset;
+	   psym < (objfile->static_psymbols.list + ps->statics_offset
+		   + ps->n_static_syms);
+	   psym++)
+	{
+	  QUIT;
+	  COMPLETION_LIST_ADD_SYMBOL (*psym, sym_text, sym_text_len, text, word);
+	}
+    }
+
+  /* At this point scan through the misc symbol vectors and add each
+     symbol you find to the list.  Eventually we want to ignore
+     anything that isn't a text symbol (everything else will be
+     handled by the psymtab code above).  */
+
+  ALL_MSYMBOLS (objfile, msymbol)
+    {
+      QUIT;
+      COMPLETION_LIST_ADD_SYMBOL (msymbol, sym_text, sym_text_len, text, word);
+    }
+
+  /* Search upwards from currently selected frame (so that we can
+     complete on local vars.  */
+
+  for (b = get_selected_block (); b != NULL; b = BLOCK_SUPERBLOCK (b))
+    {
+      if (!BLOCK_SUPERBLOCK (b))
+	{
+	  surrounding_static_block = b; 	/* For elmin of dups */
+	}
+      
+      /* Also catch fields of types defined in this places which match our
+	 text string.  Only complete on types visible from current context. */
+
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  COMPLETION_LIST_ADD_SYMBOL (sym, sym_text, sym_text_len, text, word);
+	  if (SYMBOL_CLASS (sym) == LOC_TYPEDEF)
+	    {
+	      struct type *t = SYMBOL_TYPE (sym);
+	      enum type_code c = TYPE_CODE (t);
+
+	      if (c == TYPE_CODE_UNION || c == TYPE_CODE_STRUCT)
+		{
+		  for (j = TYPE_N_BASECLASSES (t); j < TYPE_NFIELDS (t); j++)
+		    {
+		      if (TYPE_FIELD_NAME (t, j))
+			{
+			  completion_list_add_name (TYPE_FIELD_NAME (t, j),
+						      sym_text, sym_text_len, text, word);
+			}
+		    }
+		}
+	    }
+	}
+    }
+
+  /* Go through the symtabs and check the externs and statics for
+     symbols which match.  */
+
+  ALL_SYMTABS (objfile, s)
+    {
+      QUIT;
+      b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK);
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  COMPLETION_LIST_ADD_SYMBOL (sym, sym_text, sym_text_len, text, word);
+	}
+    }
+
+  ALL_SYMTABS (objfile, s)
+    {
+      QUIT;
+      b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK);
+      /* Don't do this block twice.  */
+      if (b == surrounding_static_block) continue;
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  COMPLETION_LIST_ADD_SYMBOL (sym, sym_text, sym_text_len, text, word);
+	}
+    }
+
+  return (return_val);
+}
+
+/* Determine if PC is in the prologue of a function.  The prologue is the area
+   between the first instruction of a function, and the first executable line.
+   Returns 1 if PC *might* be in prologue, 0 if definately *not* in prologue.
+
+   If non-zero, func_start is where we think the prologue starts, possibly
+   by previous examination of symbol table information.
+ */
+
+int
+in_prologue (pc, func_start)
+     CORE_ADDR pc;
+     CORE_ADDR func_start;
+{
+  struct symtab_and_line sal;
+  CORE_ADDR func_addr, func_end;
+
+  if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    goto nosyms;		/* Might be in prologue */
+
+  sal = find_pc_line (func_addr, 0);
+
+  if (sal.line == 0)
+    goto nosyms;
+
+  /* sal.end is the address of the first instruction past sal.line. */
+  if (sal.end > func_addr
+      && sal.end <= func_end)	/* Is prologue in function? */
+    return pc < sal.end;	/* Yes, is pc in prologue? */
+
+  /* The line after the prologue seems to be outside the function.  In this
+     case, tell the caller to find the prologue the hard way.  */
+
+  return 1;
+
+/* Come here when symtabs don't contain line # info.  In this case, it is
+   likely that the user has stepped into a library function w/o symbols, or
+   is doing a stepi/nexti through code without symbols.  */
+
+ nosyms:
+
+/* If func_start is zero (meaning unknown) then we don't know whether pc is
+   in the prologue or not.  I.E. it might be. */
+
+  if (!func_start) return 1;
+
+/* We need to call the target-specific prologue skipping functions with the
+   function's start address because PC may be pointing at an instruction that
+   could be mistakenly considered part of the prologue.  */
+
+  SKIP_PROLOGUE (func_start);
+
+  return pc < func_start;
+}
+
+
+/* Begin overload resolution functions */
+/* Helper routine for make_symbol_completion_list.  */
+
+static int sym_return_val_size;
+static int sym_return_val_index;
+static struct symbol **sym_return_val;
+
+/*  Test to see if the symbol specified by SYMNAME (which is already
+    demangled for C++ symbols) matches SYM_TEXT in the first SYM_TEXT_LEN
+    characters.  If so, add it to the current completion list. */
+
+static void
+overload_list_add_symbol (sym, oload_name)
+  struct symbol * sym;
+  char * oload_name;
+{
+  int newsize;
+  int i;
+
+  /* Get the demangled name without parameters */
+  char * sym_name = cplus_demangle (SYMBOL_NAME (sym), DMGL_ARM | DMGL_ANSI);
+  if (!sym_name)
+    {
+      sym_name = (char *) xmalloc (strlen (SYMBOL_NAME (sym)) + 1);
+      strcpy (sym_name, SYMBOL_NAME (sym));
+    }
+
+  /* skip symbols that cannot match */
+  if (strcmp (sym_name, oload_name) != 0)
+    return;
+
+  /* If there is no type information, we can't do anything, so skip */
+  if (SYMBOL_TYPE (sym) == NULL)
+    return;
+
+  /* skip any symbols that we've already considered. */
+  for (i = 0; i < sym_return_val_index; ++i)
+    if (!strcmp (SYMBOL_NAME (sym), SYMBOL_NAME (sym_return_val[i])))
+      return;
+
+  /* We have a match for an overload instance, so add SYM to the current list
+   * of overload instances */
+  if (sym_return_val_index + 3 > sym_return_val_size)
+    {
+      newsize = (sym_return_val_size *= 2) * sizeof (struct symbol *);
+      sym_return_val = (struct symbol **) xrealloc ((char *) sym_return_val, newsize);
+    }
+  sym_return_val[sym_return_val_index++] = sym;
+  sym_return_val[sym_return_val_index] = NULL;
+  
+  free (sym_name);
+}
+
+/* Return a null-terminated list of pointers to function symbols that
+ * match name of the supplied symbol FSYM.
+ * This is used in finding all overloaded instances of a function name.
+ * This has been modified from make_symbol_completion_list.  */
+
+
+struct symbol **
+make_symbol_overload_list (fsym)
+  struct symbol * fsym;
+{
+  register struct symbol *sym;
+  register struct symtab *s;
+  register struct partial_symtab *ps;
+  register struct minimal_symbol *msymbol;
+  register struct objfile *objfile;
+  register struct block *b, *surrounding_static_block = 0;
+  register int i, j;
+  struct partial_symbol **psym;
+  /* The name we are completing on. */
+  char *oload_name = NULL;
+  /* Length of name.  */
+  int oload_name_len = 0;
+
+  /* Look for the symbol we are supposed to complete on.
+   * FIXME: This should be language-specific.  */
+
+  oload_name = cplus_demangle (SYMBOL_NAME (fsym), DMGL_ARM | DMGL_ANSI);
+  if (!oload_name)
+    {
+      oload_name = (char *) xmalloc (strlen (SYMBOL_NAME (fsym)) + 1);
+      strcpy (oload_name, SYMBOL_NAME (fsym));
+    }
+  oload_name_len = strlen (oload_name);
+
+  sym_return_val_size = 100;
+  sym_return_val_index = 0;
+  sym_return_val = (struct symbol **) xmalloc ((sym_return_val_size + 1) * sizeof (struct symbol *));
+  sym_return_val[0] = NULL;
+
+  /* Look through the partial symtabs for all symbols which begin
+     by matching OLOAD_NAME.  Add each one that you find to the list.  */
+
+  ALL_PSYMTABS (objfile, ps)
+    {
+      /* If the psymtab's been read in we'll get it when we search
+	 through the blockvector.  */
+      if (ps->readin) continue;
+      
+      for (psym = objfile->global_psymbols.list + ps->globals_offset;
+	   psym < (objfile->global_psymbols.list + ps->globals_offset
+		   + ps->n_global_syms);
+	   psym++)
+	{
+	  /* If interrupted, then quit. */
+	  QUIT;
+	  overload_list_add_symbol (*psym, oload_name);
+	}
+      
+      for (psym = objfile->static_psymbols.list + ps->statics_offset;
+	   psym < (objfile->static_psymbols.list + ps->statics_offset
+		   + ps->n_static_syms);
+	   psym++)
+	{
+	  QUIT;
+	  overload_list_add_symbol (*psym, oload_name);
+	}
+    }
+
+  /* At this point scan through the misc symbol vectors and add each
+     symbol you find to the list.  Eventually we want to ignore
+     anything that isn't a text symbol (everything else will be
+     handled by the psymtab code above).  */
+
+  ALL_MSYMBOLS (objfile, msymbol)
+    {
+      QUIT;
+      overload_list_add_symbol (msymbol, oload_name);
+    }
+
+  /* Search upwards from currently selected frame (so that we can
+     complete on local vars.  */
+
+  for (b = get_selected_block (); b != NULL; b = BLOCK_SUPERBLOCK (b))
+    {
+      if (!BLOCK_SUPERBLOCK (b))
+	{
+	  surrounding_static_block = b; 	/* For elimination of dups */
+	}
+      
+      /* Also catch fields of types defined in this places which match our
+	 text string.  Only complete on types visible from current context. */
+
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  overload_list_add_symbol (sym, oload_name);
+	}
+    }
+
+  /* Go through the symtabs and check the externs and statics for
+     symbols which match.  */
+
+  ALL_SYMTABS (objfile, s)
+    {
+      QUIT;
+      b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), GLOBAL_BLOCK);
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  overload_list_add_symbol (sym, oload_name);
+	}
+    }
+
+  ALL_SYMTABS (objfile, s)
+    {
+      QUIT;
+      b = BLOCKVECTOR_BLOCK (BLOCKVECTOR (s), STATIC_BLOCK);
+      /* Don't do this block twice.  */
+      if (b == surrounding_static_block) continue;
+      for (i = 0; i < BLOCK_NSYMS (b); i++)
+	{
+	  sym = BLOCK_SYM (b, i);
+	  overload_list_add_symbol (sym, oload_name);
+	}
+    }
+
+  free (oload_name);
+
+  return (sym_return_val);
+}
+
+/* End of overload resolution functions */
+
+
+void
+_initialize_symtab ()
+{
+  add_info ("variables", variables_info,
+	    "All global and static variable names, or those matching REGEXP.");
+  if (dbx_commands)
+    add_com("whereis", class_info, variables_info, 
+	    "All global and static variable names, or those matching REGEXP.");
+
+  add_info ("functions", functions_info,
+	    "All function names, or those matching REGEXP.");
+
+  /* FIXME:  This command has at least the following problems:
+     1.  It prints builtin types (in a very strange and confusing fashion).
+     2.  It doesn't print right, e.g. with
+         typedef struct foo *FOO
+	 type_print prints "FOO" when we want to make it (in this situation)
+	 print "struct foo *".
+     I also think "ptype" or "whatis" is more likely to be useful (but if
+     there is much disagreement "info types" can be fixed).  */
+  add_info ("types", types_info,
+	    "All type names, or those matching REGEXP.");
+
+#if 0
+  add_info ("methods", methods_info,
+	    "All method names, or those matching REGEXP::REGEXP.\n\
+If the class qualifier is omitted, it is assumed to be the current scope.\n\
+If the first REGEXP is omitted, then all methods matching the second REGEXP\n\
+are listed.");
+#endif
+  add_info ("sources", sources_info,
+	    "Source files in the program.");
+
+  add_com ("rbreak", class_breakpoint, rbreak_command,
+	    "Set a breakpoint for all functions matching REGEXP.");
+
+  if (xdb_commands)
+    {
+      add_com ("lf", class_info, sources_info, "Source files in the program");
+      add_com ("lg", class_info, variables_info,
+	    "All global and static variable names, or those matching REGEXP.");
+    }
+
+  /* Initialize the one built-in type that isn't language dependent... */
+  builtin_type_error = init_type (TYPE_CODE_ERROR, 0, 0,
+				  "<unknown type>", (struct objfile *) NULL);
+}
diff --git a/gdb/symtab.h b/gdb/symtab.h
new file mode 100644
index 0000000..67e6bed
--- /dev/null
+++ b/gdb/symtab.h
@@ -0,0 +1,1477 @@
+/* Symbol table definitions for GDB.
+   Copyright 1986, 89, 91, 92, 93, 94, 95, 96, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (SYMTAB_H)
+#define SYMTAB_H 1
+
+/* Some definitions and declarations to go with use of obstacks.  */
+
+#include "obstack.h"
+#define obstack_chunk_alloc xmalloc
+#define obstack_chunk_free free
+#include "bcache.h"
+
+/* Don't do this; it means that if some .o's are compiled with GNU C
+   and some are not (easy to do accidentally the way we configure
+   things; also it is a pain to have to "make clean" every time you
+   want to switch compilers), then GDB dies a horrible death.  */
+/* GNU C supports enums that are bitfields.  Some compilers don't. */
+#if 0 && defined(__GNUC__) && !defined(BYTE_BITFIELD)
+#define	BYTE_BITFIELD	:8;
+#else
+#define	BYTE_BITFIELD	/*nothing*/
+#endif
+
+/* Define a structure for the information that is common to all symbol types,
+   including minimal symbols, partial symbols, and full symbols.  In a
+   multilanguage environment, some language specific information may need to
+   be recorded along with each symbol.
+
+   These fields are ordered to encourage good packing, since we frequently
+   have tens or hundreds of thousands of these.  */
+
+struct general_symbol_info
+{
+  /* Name of the symbol.  This is a required field.  Storage for the name is
+     allocated on the psymbol_obstack or symbol_obstack for the associated
+     objfile. */
+
+  char *name;
+
+  /* Value of the symbol.  Which member of this union to use, and what
+     it means, depends on what kind of symbol this is and its
+     SYMBOL_CLASS.  See comments there for more details.  All of these
+     are in host byte order (though what they point to might be in
+     target byte order, e.g. LOC_CONST_BYTES).  */
+
+  union
+    {
+      /* The fact that this is a long not a LONGEST mainly limits the
+	 range of a LOC_CONST.  Since LOC_CONST_BYTES exists, I'm not
+	 sure that is a big deal.  */
+      long ivalue;
+
+      struct block *block;
+
+      char *bytes;
+
+      CORE_ADDR address;
+
+      /* for opaque typedef struct chain */
+
+      struct symbol *chain;
+    }
+  value;
+
+  /* Since one and only one language can apply, wrap the language specific
+     information inside a union. */
+
+  union
+    {
+      struct cplus_specific      /* For C++ */
+				/*  and Java */
+	{
+	  char *demangled_name;
+	} cplus_specific;
+      struct chill_specific      /* For Chill */
+	{
+	  char *demangled_name;
+	} chill_specific;
+    } language_specific;
+
+  /* Record the source code language that applies to this symbol.
+     This is used to select one of the fields from the language specific
+     union above. */
+
+  enum language language BYTE_BITFIELD;
+
+  /* Which section is this symbol in?  This is an index into
+     section_offsets for this objfile.  Negative means that the symbol
+     does not get relocated relative to a section.
+     Disclaimer: currently this is just used for xcoff, so don't
+     expect all symbol-reading code to set it correctly (the ELF code
+     also tries to set it correctly).  */
+
+  short section;
+
+  /* The bfd section associated with this symbol. */
+
+  asection *bfd_section;
+};
+
+extern CORE_ADDR symbol_overlayed_address PARAMS((CORE_ADDR, asection *));
+
+#define SYMBOL_NAME(symbol)		(symbol)->ginfo.name
+#define SYMBOL_VALUE(symbol)		(symbol)->ginfo.value.ivalue
+#define SYMBOL_VALUE_ADDRESS(symbol)	(symbol)->ginfo.value.address
+#define SYMBOL_VALUE_BYTES(symbol)	(symbol)->ginfo.value.bytes
+#define SYMBOL_BLOCK_VALUE(symbol)	(symbol)->ginfo.value.block
+#define SYMBOL_VALUE_CHAIN(symbol)	(symbol)->ginfo.value.chain
+#define SYMBOL_LANGUAGE(symbol)		(symbol)->ginfo.language
+#define SYMBOL_SECTION(symbol)		(symbol)->ginfo.section
+#define SYMBOL_BFD_SECTION(symbol)	(symbol)->ginfo.bfd_section
+
+#define SYMBOL_CPLUS_DEMANGLED_NAME(symbol)	\
+  (symbol)->ginfo.language_specific.cplus_specific.demangled_name
+
+/* Macro that initializes the language dependent portion of a symbol
+   depending upon the language for the symbol. */
+
+#define SYMBOL_INIT_LANGUAGE_SPECIFIC(symbol,language)			\
+  do {									\
+    SYMBOL_LANGUAGE (symbol) = language;				\
+    if (SYMBOL_LANGUAGE (symbol) == language_cplus			\
+	|| SYMBOL_LANGUAGE (symbol) == language_java			\
+	)								\
+      {									\
+	SYMBOL_CPLUS_DEMANGLED_NAME (symbol) = NULL;			\
+      }									\
+    else if (SYMBOL_LANGUAGE (symbol) == language_chill)		\
+      {									\
+	SYMBOL_CHILL_DEMANGLED_NAME (symbol) = NULL;			\
+      }									\
+    else								\
+      {									\
+	memset (&(symbol)->ginfo.language_specific, 0,			\
+		sizeof ((symbol)->ginfo.language_specific));		\
+      }									\
+  } while (0)
+
+/* Macro that attempts to initialize the demangled name for a symbol,
+   based on the language of that symbol.  If the language is set to
+   language_auto, it will attempt to find any demangling algorithm
+   that works and then set the language appropriately.  If no demangling
+   of any kind is found, the language is set back to language_unknown,
+   so we can avoid doing this work again the next time we encounter
+   the symbol.  Any required space to store the name is obtained from the
+   specified obstack. */
+
+#define SYMBOL_INIT_DEMANGLED_NAME(symbol,obstack)			\
+  do {									\
+    char *demangled = NULL;						\
+    if (SYMBOL_LANGUAGE (symbol) == language_cplus			\
+	|| SYMBOL_LANGUAGE (symbol) == language_auto)			\
+      {									\
+	demangled =							\
+	  cplus_demangle (SYMBOL_NAME (symbol), DMGL_PARAMS | DMGL_ANSI);\
+	if (demangled != NULL)						\
+	  {								\
+	    SYMBOL_LANGUAGE (symbol) = language_cplus;			\
+	    SYMBOL_CPLUS_DEMANGLED_NAME (symbol) = 			\
+	      obsavestring (demangled, strlen (demangled), (obstack));	\
+	    free (demangled);						\
+	  }								\
+	else								\
+	  {								\
+	    SYMBOL_CPLUS_DEMANGLED_NAME (symbol) = NULL;		\
+	  }								\
+      }									\
+    if (SYMBOL_LANGUAGE (symbol) == language_java)			\
+      {									\
+	demangled =							\
+	  cplus_demangle (SYMBOL_NAME (symbol),				\
+			  DMGL_PARAMS | DMGL_ANSI | DMGL_JAVA);		\
+	if (demangled != NULL)						\
+	  {								\
+	    SYMBOL_LANGUAGE (symbol) = language_java;			\
+	    SYMBOL_CPLUS_DEMANGLED_NAME (symbol) = 			\
+	      obsavestring (demangled, strlen (demangled), (obstack));	\
+	    free (demangled);						\
+	  }								\
+	else								\
+	  {								\
+	    SYMBOL_CPLUS_DEMANGLED_NAME (symbol) = NULL;		\
+	  }								\
+      }									\
+    if (demangled == NULL						\
+	&& (SYMBOL_LANGUAGE (symbol) == language_chill			\
+	    || SYMBOL_LANGUAGE (symbol) == language_auto))		\
+      {									\
+	demangled =							\
+	  chill_demangle (SYMBOL_NAME (symbol));			\
+	if (demangled != NULL)						\
+	  {								\
+	    SYMBOL_LANGUAGE (symbol) = language_chill;			\
+	    SYMBOL_CHILL_DEMANGLED_NAME (symbol) = 			\
+	      obsavestring (demangled, strlen (demangled), (obstack));	\
+	    free (demangled);						\
+	  }								\
+	else								\
+	  {								\
+	    SYMBOL_CHILL_DEMANGLED_NAME (symbol) = NULL;		\
+	  }								\
+      }									\
+    if (SYMBOL_LANGUAGE (symbol) == language_auto)			\
+      {									\
+	SYMBOL_LANGUAGE (symbol) = language_unknown;			\
+      }									\
+  } while (0)
+
+/* Macro that returns the demangled name for a symbol based on the language
+   for that symbol.  If no demangled name exists, returns NULL. */
+
+#define SYMBOL_DEMANGLED_NAME(symbol)					\
+  (SYMBOL_LANGUAGE (symbol) == language_cplus				\
+   || SYMBOL_LANGUAGE (symbol) == language_java				\
+   ? SYMBOL_CPLUS_DEMANGLED_NAME (symbol)				\
+   : (SYMBOL_LANGUAGE (symbol) == language_chill			\
+      ? SYMBOL_CHILL_DEMANGLED_NAME (symbol)				\
+      : NULL))
+
+#define SYMBOL_CHILL_DEMANGLED_NAME(symbol)				\
+  (symbol)->ginfo.language_specific.chill_specific.demangled_name
+
+/* Macro that returns the "natural source name" of a symbol.  In C++ this is
+   the "demangled" form of the name if demangle is on and the "mangled" form
+   of the name if demangle is off.  In other languages this is just the
+   symbol name.  The result should never be NULL. */
+
+#define SYMBOL_SOURCE_NAME(symbol)					\
+  (demangle && SYMBOL_DEMANGLED_NAME (symbol) != NULL			\
+   ? SYMBOL_DEMANGLED_NAME (symbol)					\
+   : SYMBOL_NAME (symbol))
+
+/* Macro that returns the "natural assembly name" of a symbol.  In C++ this is
+   the "mangled" form of the name if demangle is off, or if demangle is on and
+   asm_demangle is off.  Otherwise if asm_demangle is on it is the "demangled"
+   form.  In other languages this is just the symbol name.  The result should
+   never be NULL. */
+
+#define SYMBOL_LINKAGE_NAME(symbol)					\
+  (demangle && asm_demangle && SYMBOL_DEMANGLED_NAME (symbol) != NULL	\
+   ? SYMBOL_DEMANGLED_NAME (symbol)					\
+   : SYMBOL_NAME (symbol))
+
+/* Macro that tests a symbol for a match against a specified name string.
+   First test the unencoded name, then looks for and test a C++ encoded
+   name if it exists.  Note that whitespace is ignored while attempting to
+   match a C++ encoded name, so that "foo::bar(int,long)" is the same as
+   "foo :: bar (int, long)".
+   Evaluates to zero if the match fails, or nonzero if it succeeds. */
+
+#define SYMBOL_MATCHES_NAME(symbol, name)				\
+  (STREQ (SYMBOL_NAME (symbol), (name))					\
+   || (SYMBOL_DEMANGLED_NAME (symbol) != NULL				\
+       && strcmp_iw (SYMBOL_DEMANGLED_NAME (symbol), (name)) == 0))
+   
+/* Macro that tests a symbol for an re-match against the last compiled regular
+   expression.  First test the unencoded name, then look for and test a C++
+   encoded name if it exists.
+   Evaluates to zero if the match fails, or nonzero if it succeeds. */
+
+#define SYMBOL_MATCHES_REGEXP(symbol)					\
+  (re_exec (SYMBOL_NAME (symbol)) != 0					\
+   || (SYMBOL_DEMANGLED_NAME (symbol) != NULL				\
+       && re_exec (SYMBOL_DEMANGLED_NAME (symbol)) != 0))
+   
+/* Define a simple structure used to hold some very basic information about
+   all defined global symbols (text, data, bss, abs, etc).  The only required
+   information is the general_symbol_info.
+
+   In many cases, even if a file was compiled with no special options for
+   debugging at all, as long as was not stripped it will contain sufficient
+   information to build a useful minimal symbol table using this structure.
+   Even when a file contains enough debugging information to build a full
+   symbol table, these minimal symbols are still useful for quickly mapping
+   between names and addresses, and vice versa.  They are also sometimes
+   used to figure out what full symbol table entries need to be read in. */
+
+struct minimal_symbol
+{
+
+  /* The general symbol info required for all types of symbols.
+
+     The SYMBOL_VALUE_ADDRESS contains the address that this symbol
+     corresponds to.  */
+
+  struct general_symbol_info ginfo;
+
+  /* The info field is available for caching machine-specific information
+     so it doesn't have to rederive the info constantly (over a serial line).
+     It is initialized to zero and stays that way until target-dependent code
+     sets it.  Storage for any data pointed to by this field should be allo-
+     cated on the symbol_obstack for the associated objfile.  
+     The type would be "void *" except for reasons of compatibility with older
+     compilers.  This field is optional.
+
+     Currently, the AMD 29000 tdep.c uses it to remember things it has decoded
+     from the instructions in the function header, and the MIPS-16 code uses
+     it to identify 16-bit procedures.  */
+
+  char *info;
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+  /* Which source file is this symbol in?  Only relevant for mst_file_*.  */
+  char *filename;
+#endif
+
+  /* Classification types for this symbol.  These should be taken as "advisory
+     only", since if gdb can't easily figure out a classification it simply
+     selects mst_unknown.  It may also have to guess when it can't figure out
+     which is a better match between two types (mst_data versus mst_bss) for
+     example.  Since the minimal symbol info is sometimes derived from the
+     BFD library's view of a file, we need to live with what information bfd
+     supplies. */
+
+  enum minimal_symbol_type
+    {
+      mst_unknown = 0,		/* Unknown type, the default */
+      mst_text,			/* Generally executable instructions */
+      mst_data,			/* Generally initialized data */
+      mst_bss,			/* Generally uninitialized data */
+      mst_abs,			/* Generally absolute (nonrelocatable) */
+      /* GDB uses mst_solib_trampoline for the start address of a shared
+	 library trampoline entry.  Breakpoints for shared library functions
+	 are put there if the shared library is not yet loaded.
+	 After the shared library is loaded, lookup_minimal_symbol will
+	 prefer the minimal symbol from the shared library (usually
+	 a mst_text symbol) over the mst_solib_trampoline symbol, and the
+	 breakpoints will be moved to their true address in the shared
+	 library via breakpoint_re_set.  */
+      mst_solib_trampoline,	/* Shared library trampoline code */
+      /* For the mst_file* types, the names are only guaranteed to be unique
+	 within a given .o file.  */
+      mst_file_text,		/* Static version of mst_text */
+      mst_file_data,		/* Static version of mst_data */
+      mst_file_bss		/* Static version of mst_bss */
+    } type BYTE_BITFIELD;
+};
+
+#define MSYMBOL_INFO(msymbol)		(msymbol)->info
+#define MSYMBOL_TYPE(msymbol)		(msymbol)->type
+
+
+/* All of the name-scope contours of the program
+   are represented by `struct block' objects.
+   All of these objects are pointed to by the blockvector.
+
+   Each block represents one name scope.
+   Each lexical context has its own block.
+
+   The blockvector begins with some special blocks.
+   The GLOBAL_BLOCK contains all the symbols defined in this compilation
+   whose scope is the entire program linked together.
+   The STATIC_BLOCK contains all the symbols whose scope is the
+   entire compilation excluding other separate compilations.
+   Blocks starting with the FIRST_LOCAL_BLOCK are not special.
+
+   Each block records a range of core addresses for the code that
+   is in the scope of the block.  The STATIC_BLOCK and GLOBAL_BLOCK
+   give, for the range of code, the entire range of code produced
+   by the compilation that the symbol segment belongs to.
+
+   The blocks appear in the blockvector
+   in order of increasing starting-address,
+   and, within that, in order of decreasing ending-address.
+
+   This implies that within the body of one function
+   the blocks appear in the order of a depth-first tree walk.  */
+
+struct blockvector
+{
+  /* Number of blocks in the list.  */
+  int nblocks;
+  /* The blocks themselves.  */
+  struct block *block[1];
+};
+
+#define BLOCKVECTOR_NBLOCKS(blocklist) (blocklist)->nblocks
+#define BLOCKVECTOR_BLOCK(blocklist,n) (blocklist)->block[n]
+
+/* Special block numbers */
+
+#define GLOBAL_BLOCK		0
+#define	STATIC_BLOCK		1
+#define	FIRST_LOCAL_BLOCK	2
+
+struct block
+{
+
+  /* Addresses in the executable code that are in this block.  */
+
+  CORE_ADDR startaddr;
+  CORE_ADDR endaddr;
+
+  /* The symbol that names this block, if the block is the body of a
+     function; otherwise, zero.  */
+
+  struct symbol *function;
+
+  /* The `struct block' for the containing block, or 0 if none.
+
+     The superblock of a top-level local block (i.e. a function in the
+     case of C) is the STATIC_BLOCK.  The superblock of the
+     STATIC_BLOCK is the GLOBAL_BLOCK.  */
+
+  struct block *superblock;
+
+  /* Version of GCC used to compile the function corresponding
+     to this block, or 0 if not compiled with GCC.  When possible,
+     GCC should be compatible with the native compiler, or if that
+     is not feasible, the differences should be fixed during symbol
+     reading.  As of 16 Apr 93, this flag is never used to distinguish
+     between gcc2 and the native compiler.
+
+     If there is no function corresponding to this block, this meaning
+     of this flag is undefined.  */
+
+  unsigned char gcc_compile_flag;
+
+  /* Number of local symbols.  */
+
+  int nsyms;
+
+  /* The symbols.  If some of them are arguments, then they must be
+     in the order in which we would like to print them.  */
+
+  struct symbol *sym[1];
+};
+
+#define BLOCK_START(bl)		(bl)->startaddr
+#define BLOCK_END(bl)		(bl)->endaddr
+#define BLOCK_NSYMS(bl)		(bl)->nsyms
+#define BLOCK_SYM(bl, n)	(bl)->sym[n]
+#define BLOCK_FUNCTION(bl)	(bl)->function
+#define BLOCK_SUPERBLOCK(bl)	(bl)->superblock
+#define BLOCK_GCC_COMPILED(bl)	(bl)->gcc_compile_flag
+
+/* Nonzero if symbols of block BL should be sorted alphabetically.
+   Don't sort a block which corresponds to a function.  If we did the
+   sorting would have to preserve the order of the symbols for the
+   arguments.  */
+
+#define BLOCK_SHOULD_SORT(bl) ((bl)->nsyms >= 40 && BLOCK_FUNCTION (bl) == NULL)
+
+
+/* Represent one symbol name; a variable, constant, function or typedef.  */
+
+/* Different name spaces for symbols.  Looking up a symbol specifies a
+   namespace and ignores symbol definitions in other name spaces. */
+ 
+typedef enum 
+{
+  /* UNDEF_NAMESPACE is used when a namespace has not been discovered or
+     none of the following apply.  This usually indicates an error either
+     in the symbol information or in gdb's handling of symbols. */
+
+  UNDEF_NAMESPACE,
+
+  /* VAR_NAMESPACE is the usual namespace.  In C, this contains variables,
+     function names, typedef names and enum type values. */
+
+  VAR_NAMESPACE,
+
+  /* STRUCT_NAMESPACE is used in C to hold struct, union and enum type names.
+     Thus, if `struct foo' is used in a C program, it produces a symbol named
+     `foo' in the STRUCT_NAMESPACE. */
+
+  STRUCT_NAMESPACE,
+
+  /* LABEL_NAMESPACE may be used for names of labels (for gotos);
+     currently it is not used and labels are not recorded at all.  */
+
+  LABEL_NAMESPACE,
+
+  /* Searching namespaces. These overlap with VAR_NAMESPACE, providing
+     some granularity with the search_symbols function. */
+
+  /* Everything in VAR_NAMESPACE minus FUNCTIONS_-, TYPES_-, and
+     METHODS_NAMESPACE */
+  VARIABLES_NAMESPACE,
+
+  /* All functions -- for some reason not methods, though. */
+  FUNCTIONS_NAMESPACE,
+
+  /* All defined types */
+  TYPES_NAMESPACE,
+
+  /* All class methods -- why is this separated out? */
+  METHODS_NAMESPACE
+
+} namespace_enum;
+
+/* An address-class says where to find the value of a symbol.  */
+
+enum address_class
+{
+  /* Not used; catches errors */
+
+  LOC_UNDEF,
+
+  /* Value is constant int SYMBOL_VALUE, host byteorder */
+
+  LOC_CONST,
+
+  /* Value is at fixed address SYMBOL_VALUE_ADDRESS */
+
+  LOC_STATIC,
+
+  /* Value is in register.  SYMBOL_VALUE is the register number.  */
+
+  LOC_REGISTER,
+
+  /* It's an argument; the value is at SYMBOL_VALUE offset in arglist.  */
+
+  LOC_ARG,
+
+  /* Value address is at SYMBOL_VALUE offset in arglist.  */
+
+  LOC_REF_ARG,
+
+  /* Value is in register number SYMBOL_VALUE.  Just like LOC_REGISTER
+     except this is an argument.  Probably the cleaner way to handle
+     this would be to separate address_class (which would include
+     separate ARG and LOCAL to deal with FRAME_ARGS_ADDRESS versus
+     FRAME_LOCALS_ADDRESS), and an is_argument flag.
+
+     For some symbol formats (stabs, for some compilers at least),
+     the compiler generates two symbols, an argument and a register.
+     In some cases we combine them to a single LOC_REGPARM in symbol
+     reading, but currently not for all cases (e.g. it's passed on the
+     stack and then loaded into a register).  */
+
+  LOC_REGPARM,
+
+  /* Value is in specified register.  Just like LOC_REGPARM except the
+     register holds the address of the argument instead of the argument
+     itself. This is currently used for the passing of structs and unions
+     on sparc and hppa.  It is also used for call by reference where the
+     address is in a register, at least by mipsread.c.  */
+
+  LOC_REGPARM_ADDR,
+
+  /* Value is a local variable at SYMBOL_VALUE offset in stack frame.  */
+
+  LOC_LOCAL,
+
+  /* Value not used; definition in SYMBOL_TYPE.  Symbols in the namespace
+     STRUCT_NAMESPACE all have this class.  */
+
+  LOC_TYPEDEF,
+
+  /* Value is address SYMBOL_VALUE_ADDRESS in the code */
+
+  LOC_LABEL,
+
+  /* In a symbol table, value is SYMBOL_BLOCK_VALUE of a `struct block'.
+     In a partial symbol table, SYMBOL_VALUE_ADDRESS is the start address
+     of the block.  Function names have this class. */
+
+  LOC_BLOCK,
+
+  /* Value is a constant byte-sequence pointed to by SYMBOL_VALUE_BYTES, in
+     target byte order.  */
+
+  LOC_CONST_BYTES,
+
+  /* Value is arg at SYMBOL_VALUE offset in stack frame. Differs from
+     LOC_LOCAL in that symbol is an argument; differs from LOC_ARG in
+     that we find it in the frame (FRAME_LOCALS_ADDRESS), not in the
+     arglist (FRAME_ARGS_ADDRESS).  Added for i960, which passes args
+     in regs then copies to frame.  */
+
+  LOC_LOCAL_ARG,
+
+  /* Value is at SYMBOL_VALUE offset from the current value of
+     register number SYMBOL_BASEREG.  This exists mainly for the same
+     things that LOC_LOCAL and LOC_ARG do; but we need to do this
+     instead because on 88k DWARF gives us the offset from the
+     frame/stack pointer, rather than the offset from the "canonical
+     frame address" used by COFF, stabs, etc., and we don't know how
+     to convert between these until we start examining prologues.
+
+     Note that LOC_BASEREG is much less general than a DWARF expression.
+     We don't need the generality (at least not yet), and storing a general
+     DWARF expression would presumably take up more space than the existing
+     scheme.  */
+
+  LOC_BASEREG,
+
+  /* Same as LOC_BASEREG but it is an argument.  */
+
+  LOC_BASEREG_ARG,
+
+  /* Value is at fixed address, but the address of the variable has
+     to be determined from the minimal symbol table whenever the
+     variable is referenced.
+     This happens if debugging information for a global symbol is
+     emitted and the corresponding minimal symbol is defined
+     in another object file or runtime common storage.
+     The linker might even remove the minimal symbol if the global
+     symbol is never referenced, in which case the symbol remains
+     unresolved.  */
+
+  LOC_UNRESOLVED,
+
+  /* Value is at a thread-specific location calculated by a
+     target-specific method. */
+     
+  LOC_THREAD_LOCAL_STATIC,
+     
+  /* The variable does not actually exist in the program.
+     The value is ignored.  */
+
+  LOC_OPTIMIZED_OUT,
+
+  /* The variable is static, but actually lives at * (address).
+   * I.e. do an extra indirection to get to it.
+   * This is used on HP-UX to get at globals that are allocated
+   * in shared libraries, where references from images other
+   * than the one where the global was allocated are done
+   * with a level of indirection.
+   */
+
+  LOC_INDIRECT
+
+};
+
+/* Linked list of symbol's live ranges. */
+
+struct range_list		
+{
+  CORE_ADDR start;
+  CORE_ADDR end;
+  struct range_list *next;	
+};
+
+/* Linked list of aliases for a particular main/primary symbol.  */
+struct alias_list
+  {
+    struct symbol *sym;
+    struct alias_list *next;
+  };
+
+struct symbol
+{
+
+  /* The general symbol info required for all types of symbols. */
+
+  struct general_symbol_info ginfo;
+
+  /* Data type of value */
+
+  struct type *type;
+
+  /* Name space code.  */
+
+#ifdef __MFC4__
+  /* FIXME: don't conflict with C++'s namespace */
+  /* would be safer to do a global change for all namespace identifiers. */
+  #define namespace _namespace
+#endif
+  namespace_enum namespace BYTE_BITFIELD;
+
+  /* Address class */
+
+  enum address_class aclass BYTE_BITFIELD;
+
+  /* Line number of definition.  FIXME:  Should we really make the assumption
+     that nobody will try to debug files longer than 64K lines?  What about
+     machine generated programs? */
+
+  unsigned short line;
+  
+  /* Some symbols require an additional value to be recorded on a per-
+     symbol basis.  Stash those values here. */
+
+  union
+    {
+      /* Used by LOC_BASEREG and LOC_BASEREG_ARG.  */
+      short basereg;
+    }
+  aux_value;
+
+
+  /* Link to a list of aliases for this symbol.
+     Only a "primary/main symbol may have aliases.  */
+  struct alias_list *aliases;
+
+  /* List of ranges where this symbol is active.  This is only
+     used by alias symbols at the current time.  */
+  struct range_list *ranges;
+};
+
+
+#define SYMBOL_NAMESPACE(symbol)	(symbol)->namespace
+#define SYMBOL_CLASS(symbol)		(symbol)->aclass
+#define SYMBOL_TYPE(symbol)		(symbol)->type
+#define SYMBOL_LINE(symbol)		(symbol)->line
+#define SYMBOL_BASEREG(symbol)		(symbol)->aux_value.basereg
+#define SYMBOL_ALIASES(symbol)		(symbol)->aliases
+#define SYMBOL_RANGES(symbol)		(symbol)->ranges
+
+/* A partial_symbol records the name, namespace, and address class of
+   symbols whose types we have not parsed yet.  For functions, it also
+   contains their memory address, so we can find them from a PC value.
+   Each partial_symbol sits in a partial_symtab, all of which are chained
+   on a  partial symtab list and which points to the corresponding 
+   normal symtab once the partial_symtab has been referenced.  */
+
+struct partial_symbol
+{
+
+  /* The general symbol info required for all types of symbols. */
+
+  struct general_symbol_info ginfo;
+
+  /* Name space code.  */
+
+  namespace_enum namespace BYTE_BITFIELD;
+
+  /* Address class (for info_symbols) */
+
+  enum address_class aclass BYTE_BITFIELD;
+
+};
+
+#define PSYMBOL_NAMESPACE(psymbol)	(psymbol)->namespace
+#define PSYMBOL_CLASS(psymbol)		(psymbol)->aclass
+
+
+/* Source-file information.  This describes the relation between source files,
+   ine numbers and addresses in the program text.  */
+
+struct sourcevector
+{
+  int length;			/* Number of source files described */
+  struct source *source[1];	/* Descriptions of the files */
+};
+
+/* Each item represents a line-->pc (or the reverse) mapping.  This is
+   somewhat more wasteful of space than one might wish, but since only
+   the files which are actually debugged are read in to core, we don't
+   waste much space.  */
+
+struct linetable_entry
+{
+  int line;
+  CORE_ADDR pc;
+};
+
+/* The order of entries in the linetable is significant.  They should
+   be sorted by increasing values of the pc field.  If there is more than
+   one entry for a given pc, then I'm not sure what should happen (and
+   I not sure whether we currently handle it the best way).
+
+   Example: a C for statement generally looks like this
+
+   	10	0x100	- for the init/test part of a for stmt.
+   	20	0x200
+   	30	0x300
+   	10	0x400	- for the increment part of a for stmt.
+
+   */
+
+struct linetable
+{
+  int nitems;
+
+  /* Actually NITEMS elements.  If you don't like this use of the
+     `struct hack', you can shove it up your ANSI (seriously, if the
+     committee tells us how to do it, we can probably go along).  */
+  struct linetable_entry item[1];
+};
+
+/* All the information on one source file.  */
+
+struct source
+{
+  char *name;			/* Name of file */
+  struct linetable contents;
+};
+
+/* How to relocate the symbols from each section in a symbol file.
+   Each struct contains an array of offsets.
+   The ordering and meaning of the offsets is file-type-dependent;
+   typically it is indexed by section numbers or symbol types or
+   something like that.
+
+   To give us flexibility in changing the internal representation
+   of these offsets, the ANOFFSET macro must be used to insert and
+   extract offset values in the struct.  */
+
+struct section_offsets
+  {
+    CORE_ADDR offsets[1];		/* As many as needed. */
+  };
+
+#define	ANOFFSET(secoff, whichone)	(secoff->offsets[whichone])
+
+/* The maximum possible size of a section_offsets table.  */
+ 
+#define SIZEOF_SECTION_OFFSETS \
+  (sizeof (struct section_offsets) \
+   + sizeof (((struct section_offsets *) 0)->offsets) * (SECT_OFF_MAX-1))
+
+
+/* Each source file or header is represented by a struct symtab. 
+   These objects are chained through the `next' field.  */
+
+struct symtab
+  {
+
+    /* Chain of all existing symtabs.  */
+
+    struct symtab *next;
+
+    /* List of all symbol scope blocks for this symtab.  May be shared
+       between different symtabs (and normally is for all the symtabs
+       in a given compilation unit).  */
+
+    struct blockvector *blockvector;
+
+    /* Table mapping core addresses to line numbers for this file.
+       Can be NULL if none.  Never shared between different symtabs.  */
+
+    struct linetable *linetable;
+
+    /* Section in objfile->section_offsets for the blockvector and
+       the linetable.  Probably always SECT_OFF_TEXT.  */
+
+    int block_line_section;
+
+    /* If several symtabs share a blockvector, exactly one of them
+       should be designed the primary, so that the blockvector
+       is relocated exactly once by objfile_relocate.  */
+
+    int primary;
+
+    /* Name of this source file.  */
+
+    char *filename;
+
+    /* Directory in which it was compiled, or NULL if we don't know.  */
+
+    char *dirname;
+
+    /* This component says how to free the data we point to:
+       free_contents => do a tree walk and free each object.
+       free_nothing => do nothing; some other symtab will free
+         the data this one uses.
+      free_linetable => free just the linetable.  FIXME: Is this redundant
+      with the primary field?  */
+
+    enum free_code
+      {
+	free_nothing, free_contents, free_linetable
+	}
+    free_code;
+
+    /* Pointer to one block of storage to be freed, if nonzero.  */
+    /* This is IN ADDITION to the action indicated by free_code.  */
+    
+    char *free_ptr;
+
+    /* Total number of lines found in source file.  */
+
+    int nlines;
+
+    /* line_charpos[N] is the position of the (N-1)th line of the
+       source file.  "position" means something we can lseek() to; it
+       is not guaranteed to be useful any other way.  */
+
+    int *line_charpos;
+
+    /* Language of this source file.  */
+
+    enum language language;
+
+    /* String that identifies the format of the debugging information, such
+       as "stabs", "dwarf 1", "dwarf 2", "coff", etc.  This is mostly useful
+       for automated testing of gdb but may also be information that is
+       useful to the user. */
+
+    char *debugformat;
+
+    /* String of version information.  May be zero.  */
+
+    char *version;
+
+    /* Full name of file as found by searching the source path.
+       NULL if not yet known.  */
+
+    char *fullname;
+
+    /* Object file from which this symbol information was read.  */
+
+    struct objfile *objfile;
+
+  };
+
+#define BLOCKVECTOR(symtab)	(symtab)->blockvector
+#define LINETABLE(symtab)	(symtab)->linetable
+
+
+/* Each source file that has not been fully read in is represented by
+   a partial_symtab.  This contains the information on where in the
+   executable the debugging symbols for a specific file are, and a
+   list of names of global symbols which are located in this file.
+   They are all chained on partial symtab lists.
+
+   Even after the source file has been read into a symtab, the
+   partial_symtab remains around.  They are allocated on an obstack,
+   psymbol_obstack.  FIXME, this is bad for dynamic linking or VxWorks-
+   style execution of a bunch of .o's.  */
+
+struct partial_symtab
+{
+
+  /* Chain of all existing partial symtabs.  */
+
+  struct partial_symtab *next;
+
+  /* Name of the source file which this partial_symtab defines */
+
+  char *filename;
+
+  /* Information about the object file from which symbols should be read.  */
+
+  struct objfile *objfile;
+
+  /* Set of relocation offsets to apply to each section.  */ 
+
+  struct section_offsets *section_offsets;
+
+  /* Range of text addresses covered by this file; texthigh is the
+     beginning of the next section. */
+
+  CORE_ADDR textlow;
+  CORE_ADDR texthigh;
+
+  /* Array of pointers to all of the partial_symtab's which this one
+     depends on.  Since this array can only be set to previous or
+     the current (?) psymtab, this dependency tree is guaranteed not
+     to have any loops.  "depends on" means that symbols must be read
+     for the dependencies before being read for this psymtab; this is
+     for type references in stabs, where if foo.c includes foo.h, declarations
+     in foo.h may use type numbers defined in foo.c.  For other debugging
+     formats there may be no need to use dependencies.  */
+
+  struct partial_symtab **dependencies;
+
+  int number_of_dependencies;
+
+  /* Global symbol list.  This list will be sorted after readin to
+     improve access.  Binary search will be the usual method of
+     finding a symbol within it. globals_offset is an integer offset
+     within global_psymbols[].  */
+
+  int globals_offset;
+  int n_global_syms;
+
+  /* Static symbol list.  This list will *not* be sorted after readin;
+     to find a symbol in it, exhaustive search must be used.  This is
+     reasonable because searches through this list will eventually
+     lead to either the read in of a files symbols for real (assumed
+     to take a *lot* of time; check) or an error (and we don't care
+     how long errors take).  This is an offset and size within
+     static_psymbols[].  */
+
+  int statics_offset;
+  int n_static_syms;
+
+  /* Pointer to symtab eventually allocated for this source file, 0 if
+     !readin or if we haven't looked for the symtab after it was readin.  */
+
+  struct symtab *symtab;
+
+  /* Pointer to function which will read in the symtab corresponding to
+     this psymtab.  */
+
+  void (*read_symtab) PARAMS ((struct partial_symtab *));
+
+  /* Information that lets read_symtab() locate the part of the symbol table
+     that this psymtab corresponds to.  This information is private to the
+     format-dependent symbol reading routines.  For further detail examine
+     the various symbol reading modules.  Should really be (void *) but is
+     (char *) as with other such gdb variables.  (FIXME) */
+
+  char *read_symtab_private;
+
+  /* Non-zero if the symtab corresponding to this psymtab has been readin */
+
+  unsigned char readin;
+};
+
+/* A fast way to get from a psymtab to its symtab (after the first time).  */
+#define	PSYMTAB_TO_SYMTAB(pst)  \
+    ((pst) -> symtab != NULL ? (pst) -> symtab : psymtab_to_symtab (pst))
+
+
+/* The virtual function table is now an array of structures which have the
+   form { int16 offset, delta; void *pfn; }. 
+
+   In normal virtual function tables, OFFSET is unused.
+   DELTA is the amount which is added to the apparent object's base
+   address in order to point to the actual object to which the
+   virtual function should be applied.
+   PFN is a pointer to the virtual function.
+
+   Note that this macro is g++ specific (FIXME). */
+  
+#define VTBL_FNADDR_OFFSET 2
+
+/* Macro that yields non-zero value iff NAME is the prefix for C++ operator
+   names.  If you leave out the parenthesis here you will lose!
+   Currently 'o' 'p' CPLUS_MARKER is used for both the symbol in the
+   symbol-file and the names in gdb's symbol table.
+   Note that this macro is g++ specific (FIXME). */
+
+#define OPNAME_PREFIX_P(NAME) \
+  ((NAME)[0] == 'o' && (NAME)[1] == 'p' && is_cplus_marker ((NAME)[2]))
+
+/* Macro that yields non-zero value iff NAME is the prefix for C++ vtbl
+   names.  Note that this macro is g++ specific (FIXME).
+   '_vt$' is the old cfront-style vtables; '_VT$' is the new
+   style, using thunks (where '$' is really CPLUS_MARKER). */
+
+#define VTBL_PREFIX_P(NAME) \
+  ((NAME)[0] == '_' \
+   && (((NAME)[1] == 'V' && (NAME)[2] == 'T') \
+       || ((NAME)[1] == 'v' && (NAME)[2] == 't')) \
+   && is_cplus_marker ((NAME)[3]))
+
+/* Macro that yields non-zero value iff NAME is the prefix for C++ destructor
+   names.  Note that this macro is g++ specific (FIXME).  */
+
+#define DESTRUCTOR_PREFIX_P(NAME) \
+  ((NAME)[0] == '_' && is_cplus_marker ((NAME)[1]) && (NAME)[2] == '_')
+
+
+/* External variables and functions for the objects described above. */
+
+/* This symtab variable specifies the current file for printing source lines */
+
+extern struct symtab *current_source_symtab;
+
+/* This is the next line to print for listing source lines.  */
+
+extern int current_source_line;
+
+/* See the comment in symfile.c about how current_objfile is used. */
+
+extern struct objfile *current_objfile;
+
+/* True if we are nested inside psymtab_to_symtab. */
+
+extern int currently_reading_symtab;
+
+/* From utils.c.  */
+extern int demangle;
+extern int asm_demangle;
+
+/* symtab.c lookup functions */
+
+/* lookup a symbol table by source file name */
+
+extern struct symtab *
+lookup_symtab PARAMS ((char *));
+
+/* lookup a symbol by name (optional block, optional symtab) */
+
+extern struct symbol *
+lookup_symbol PARAMS ((const char *, const struct block *,
+		       const namespace_enum, int *, struct symtab **));
+
+/* lookup a symbol by name, within a specified block */
+  
+extern struct symbol *
+lookup_block_symbol PARAMS ((const struct block *, const char *,
+ 			     const namespace_enum));
+
+/* lookup a [struct, union, enum] by name, within a specified block */
+
+extern struct type *
+lookup_struct PARAMS ((char *, struct block *));
+
+extern struct type *
+lookup_union PARAMS ((char *, struct block *));
+
+extern struct type *
+lookup_enum PARAMS ((char *, struct block *));
+
+/* lookup the function corresponding to the block */
+
+extern struct symbol *
+block_function PARAMS ((struct block *));
+
+/* from blockframe.c: */
+
+/* lookup the function symbol corresponding to the address */
+
+extern struct symbol *
+find_pc_function PARAMS ((CORE_ADDR));
+
+/* lookup the function corresponding to the address and section */
+
+extern struct symbol *
+find_pc_sect_function PARAMS ((CORE_ADDR, asection *));
+  
+/* lookup function from address, return name, start addr and end addr */
+
+extern int 
+find_pc_partial_function PARAMS ((CORE_ADDR, char **,
+					     CORE_ADDR *, CORE_ADDR *));
+
+extern void
+clear_pc_function_cache PARAMS ((void));
+
+extern int 
+find_pc_sect_partial_function PARAMS ((CORE_ADDR, asection *, 
+                                       char **, CORE_ADDR *, CORE_ADDR *));
+
+/* from symtab.c: */
+
+/* lookup partial symbol table by filename */
+
+extern struct partial_symtab *
+lookup_partial_symtab PARAMS ((char *));
+
+/* lookup partial symbol table by address */
+
+extern struct partial_symtab *
+find_pc_psymtab PARAMS ((CORE_ADDR));
+
+/* lookup partial symbol table by address and section */
+
+extern struct partial_symtab *
+find_pc_sect_psymtab PARAMS ((CORE_ADDR, asection *));
+
+/* lookup full symbol table by address */
+
+extern struct symtab *
+find_pc_symtab PARAMS ((CORE_ADDR));
+
+/* lookup full symbol table by address and section */
+
+extern struct symtab *
+find_pc_sect_symtab PARAMS ((CORE_ADDR, asection *));
+
+/* lookup partial symbol by address */
+
+extern struct partial_symbol *
+find_pc_psymbol PARAMS ((struct partial_symtab *, CORE_ADDR));
+
+/* lookup partial symbol by address and section */
+
+extern struct partial_symbol *
+find_pc_sect_psymbol PARAMS ((struct partial_symtab *, CORE_ADDR, asection *));
+
+extern int
+find_pc_line_pc_range PARAMS ((CORE_ADDR, CORE_ADDR *, CORE_ADDR *));
+
+extern int
+contained_in PARAMS ((struct block *, struct block *));
+
+extern void
+reread_symbols PARAMS ((void));
+
+extern struct type *
+lookup_transparent_type PARAMS ((const char *));
+
+
+/* Macro for name of symbol to indicate a file compiled with gcc. */
+#ifndef GCC_COMPILED_FLAG_SYMBOL
+#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled."
+#endif
+
+/* Macro for name of symbol to indicate a file compiled with gcc2. */
+#ifndef GCC2_COMPILED_FLAG_SYMBOL
+#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled."
+#endif
+
+/* Functions for dealing with the minimal symbol table, really a misc
+   address<->symbol mapping for things we don't have debug symbols for.  */
+
+extern void prim_record_minimal_symbol PARAMS ((const char *, CORE_ADDR,
+						enum minimal_symbol_type,
+						struct objfile *));
+
+extern struct minimal_symbol *prim_record_minimal_symbol_and_info
+  PARAMS ((const char *, CORE_ADDR,
+	   enum minimal_symbol_type,
+	   char *info, int section,
+	   asection *bfd_section,
+	   struct objfile *));
+
+#ifdef SOFUN_ADDRESS_MAYBE_MISSING
+extern CORE_ADDR find_stab_function_addr PARAMS ((char *,
+						  struct partial_symtab *,
+						  struct objfile *));
+#endif
+
+extern struct minimal_symbol *
+lookup_minimal_symbol PARAMS ((const char *, const char *, struct objfile *));
+
+extern struct minimal_symbol *
+lookup_minimal_symbol_text PARAMS ((const char *, const char *, struct objfile *));
+
+struct minimal_symbol *
+lookup_minimal_symbol_solib_trampoline PARAMS ((const char *,
+						const char *,
+						struct objfile *));
+
+extern struct minimal_symbol *
+lookup_minimal_symbol_by_pc PARAMS ((CORE_ADDR));
+
+extern struct minimal_symbol *
+lookup_minimal_symbol_by_pc_section PARAMS ((CORE_ADDR, asection *));
+
+extern struct minimal_symbol *
+lookup_solib_trampoline_symbol_by_pc PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR
+find_solib_trampoline_target PARAMS ((CORE_ADDR));
+
+extern void
+init_minimal_symbol_collection PARAMS ((void));
+
+extern void
+discard_minimal_symbols PARAMS ((int));
+
+extern void
+install_minimal_symbols PARAMS ((struct objfile *));
+
+/* Sort all the minimal symbols in OBJFILE.  */
+
+extern void msymbols_sort PARAMS ((struct objfile *objfile));
+
+struct symtab_and_line
+{
+  struct symtab *symtab;
+  asection      *section;
+  /* Line number.  Line numbers start at 1 and proceed through symtab->nlines.
+     0 is never a valid line number; it is used to indicate that line number
+     information is not available.  */
+  int line;
+
+  CORE_ADDR pc;
+  CORE_ADDR end;
+};
+
+#define INIT_SAL(sal) { \
+  (sal)->symtab  = 0;   \
+  (sal)->section = 0;   \
+  (sal)->line    = 0;   \
+  (sal)->pc      = 0;   \
+  (sal)->end     = 0;   \
+}
+
+struct symtabs_and_lines
+{
+  struct symtab_and_line *sals;
+  int nelts;
+};
+
+
+
+/* Some types and macros needed for exception catchpoints.
+   Can't put these in target.h because symtab_and_line isn't
+   known there. This file will be included by breakpoint.c,
+   hppa-tdep.c, etc. */
+
+/* Enums for exception-handling support */
+enum exception_event_kind {
+  EX_EVENT_THROW,
+  EX_EVENT_CATCH
+};
+
+/* Type for returning info about an exception */
+struct exception_event_record {
+  enum exception_event_kind   kind;
+  struct symtab_and_line      throw_sal;
+  struct symtab_and_line      catch_sal;
+  /* This may need to be extended in the future, if
+     some platforms allow reporting more information,
+     such as point of rethrow, type of exception object,
+     type expected by catch clause, etc. */ 
+};
+
+#define CURRENT_EXCEPTION_KIND       (current_exception_event->kind)
+#define CURRENT_EXCEPTION_CATCH_SAL  (current_exception_event->catch_sal)
+#define CURRENT_EXCEPTION_CATCH_LINE (current_exception_event->catch_sal.line)
+#define CURRENT_EXCEPTION_CATCH_FILE (current_exception_event->catch_sal.symtab->filename)
+#define CURRENT_EXCEPTION_CATCH_PC   (current_exception_event->catch_sal.pc)
+#define CURRENT_EXCEPTION_THROW_SAL  (current_exception_event->throw_sal)
+#define CURRENT_EXCEPTION_THROW_LINE (current_exception_event->throw_sal.line)
+#define CURRENT_EXCEPTION_THROW_FILE (current_exception_event->throw_sal.symtab->filename)
+#define CURRENT_EXCEPTION_THROW_PC   (current_exception_event->throw_sal.pc)
+
+
+/* Given a pc value, return line number it is in.  Second arg nonzero means
+   if pc is on the boundary use the previous statement's line number.  */
+
+extern struct symtab_and_line
+find_pc_line PARAMS ((CORE_ADDR, int));
+
+/* Same function, but specify a section as well as an address */
+
+extern struct symtab_and_line
+find_pc_sect_line PARAMS ((CORE_ADDR, asection *, int));
+
+/* Given an address, return the nearest symbol at or below it in memory.
+   Optionally return the symtab it's from through 2nd arg, and the
+   address in inferior memory of the symbol through 3rd arg.  */
+
+extern struct symbol *
+find_addr_symbol PARAMS ((CORE_ADDR, struct symtab **, CORE_ADDR *));
+
+/* Given a symtab and line number, return the pc there.  */
+
+extern int
+find_line_pc PARAMS ((struct symtab *, int, CORE_ADDR *));
+
+extern int 
+find_line_pc_range PARAMS ((struct symtab_and_line,
+			    CORE_ADDR *, CORE_ADDR *));
+
+extern void
+resolve_sal_pc PARAMS ((struct symtab_and_line *));
+
+/* Given a string, return the line specified by it.  For commands like "list"
+   and "breakpoint".  */
+
+extern struct symtabs_and_lines
+decode_line_spec PARAMS ((char *, int));
+
+extern struct symtabs_and_lines
+decode_line_spec_1 PARAMS ((char *, int));
+
+extern struct symtabs_and_lines
+decode_line_1 PARAMS ((char **, int, struct symtab *, int, char ***));
+
+#if MAINTENANCE_CMDS
+
+/* Symmisc.c */
+
+void
+maintenance_print_symbols PARAMS ((char *, int));
+
+void
+maintenance_print_psymbols PARAMS ((char *, int));
+
+void
+maintenance_print_msymbols PARAMS ((char *, int));
+
+void
+maintenance_print_objfiles PARAMS ((char *, int));
+
+void
+maintenance_check_symtabs PARAMS ((char *, int));
+
+/* maint.c */
+
+void
+maintenance_print_statistics PARAMS ((char *, int));
+
+#endif
+
+extern void
+free_symtab PARAMS ((struct symtab *));
+
+/* Symbol-reading stuff in symfile.c and solib.c.  */
+
+extern struct symtab *
+psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+extern void
+clear_solib PARAMS ((void));
+
+extern struct objfile *
+symbol_file_add PARAMS ((char *, int, CORE_ADDR, int, int, int, int, int));
+
+/* source.c */
+
+extern int
+identify_source_line PARAMS ((struct symtab *, int, int, CORE_ADDR));
+
+extern void
+print_source_lines PARAMS ((struct symtab *, int, int, int));
+
+extern void
+forget_cached_source_info PARAMS ((void));
+
+extern void
+select_source_symtab PARAMS ((struct symtab *));
+
+extern char **make_symbol_completion_list PARAMS ((char *, char *));
+
+extern struct symbol **
+make_symbol_overload_list PARAMS ((struct symbol *));
+
+/* symtab.c */
+
+extern struct partial_symtab *
+find_main_psymtab PARAMS ((void));
+
+/* blockframe.c */
+
+extern struct blockvector *
+blockvector_for_pc PARAMS ((CORE_ADDR, int *));
+
+extern struct blockvector *
+blockvector_for_pc_sect PARAMS ((CORE_ADDR, asection *, int *, 
+				 struct symtab *));
+
+/* symfile.c */
+
+extern void
+clear_symtab_users PARAMS ((void));
+
+extern enum language
+deduce_language_from_filename PARAMS ((char *));
+
+/* symtab.c */
+
+extern int
+in_prologue PARAMS ((CORE_ADDR pc, CORE_ADDR func_start));
+
+extern struct symbol *
+fixup_symbol_section PARAMS ((struct symbol  *, struct objfile *));
+
+/* Symbol searching */
+
+/* When using search_symbols, a list of the following structs is returned.
+   Callers must free the search list using free_symbol_search! */
+struct symbol_search
+{
+  /* The block in which the match was found. Could be, for example,
+     STATIC_BLOCK or GLOBAL_BLOCK. */
+  int block;
+
+  /* Information describing what was found.
+
+     If symtab abd symbol are NOT NULL, then information was found
+     for this match. */
+  struct symtab *symtab;
+  struct symbol *symbol;
+
+  /* If msymbol is non-null, then a match was made on something for
+     which only minimal_symbols exist. */
+  struct minimal_symbol *msymbol;
+
+  /* A link to the next match, or NULL for the end. */
+  struct symbol_search *next;
+};
+
+extern void search_symbols PARAMS ((char *, namespace_enum, int, char **, struct symbol_search **));
+extern void free_search_symbols PARAMS ((struct symbol_search *));
+
+#endif /* !defined(SYMTAB_H) */
diff --git a/gdb/tahoe-tdep.c b/gdb/tahoe-tdep.c
new file mode 100644
index 0000000..ea8a752
--- /dev/null
+++ b/gdb/tahoe-tdep.c
@@ -0,0 +1,234 @@
+/* Print instructions for Tahoe target machines, for GDB.
+   Copyright 1986, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by the State University of New York at Buffalo, by the
+   Distributed Computer Systems Lab, Department of Computer Science, 1991.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "opcode/tahoe.h"
+
+/* Tahoe instructions are never longer than this.  */
+#define MAXLEN 62
+
+/* Number of elements in the opcode table.  */
+#define NOPCODES (sizeof votstrs / sizeof votstrs[0])
+
+static unsigned char *print_insn_arg ();
+
+/* Print the Tahoe instruction at address MEMADDR in debugged memory,
+   on STREAM.  Returns length of the instruction, in bytes.  */
+
+int
+tahoe_print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     GDB_FILE *stream;
+{
+  unsigned char buffer[MAXLEN];
+  register int i;
+  register unsigned char *p;
+  register char *d;
+
+  read_memory (memaddr, buffer, MAXLEN);
+
+  for (i = 0; i < NOPCODES; i++)
+    if (votstrs[i].detail.code == buffer[0]
+	|| votstrs[i].detail.code == *(unsigned short *)buffer)
+      break;
+
+  /* Handle undefined instructions.  */
+  if (i == NOPCODES)
+    {
+      fprintf_unfiltered (stream, "0%o", buffer[0]);
+      return 1;
+    }
+
+  fprintf_unfiltered (stream, "%s", votstrs[i].name);
+
+  /* Point at first byte of argument data,
+     and at descriptor for first argument.  */
+  p = buffer + 1 + (votstrs[i].detail.code >= 0x100);
+  d = votstrs[i].detail.args;
+
+  if (*d)
+    fputc_unfiltered ('\t', stream);
+
+  while (*d)
+    {
+      p = print_insn_arg (d, p, memaddr + (p - buffer), stream);
+      d += 2;
+      if (*d)
+	fprintf_unfiltered (stream, ",");
+    }
+  return p - buffer;
+}
+/*******************************************************************/
+static unsigned char *
+print_insn_arg (d, p, addr, stream)
+     char *d;
+     register char *p;
+     CORE_ADDR addr;
+     GDB_FILE *stream;
+{
+  int temp1 = 0;
+  register int regnum = *p & 0xf;
+  float floatlitbuf;
+
+  if (*d == 'b')
+    {
+      if (d[1] == 'b')
+	fprintf_unfiltered (stream, "0x%x", addr + *p++ + 1);
+      else
+	{
+
+	  temp1 = *p;
+	  temp1 <<= 8;
+	  temp1 |= *(p + 1);
+	  fprintf_unfiltered (stream, "0x%x", addr + temp1 + 2);
+	  p += 2;
+	}
+    }
+  else
+    switch ((*p++ >> 4) & 0xf)
+      {
+      case 0:
+      case 1:
+      case 2:
+      case 3:			/* Literal (short immediate byte) mode */
+	if (d[1] == 'd' || d[1] == 'f' || d[1] == 'g' || d[1] == 'h')
+	  {
+	    *(int *)&floatlitbuf = 0x4000 + ((p[-1] & 0x3f) << 4);
+	    fprintf_unfiltered (stream, "$%f", floatlitbuf);
+	  }
+	else
+	  fprintf_unfiltered (stream, "$%d", p[-1] & 0x3f);
+	break;
+
+      case 4:			/* Indexed */
+	p = (char *) print_insn_arg (d, p, addr + 1, stream);
+	fprintf_unfiltered (stream, "[%s]", REGISTER_NAME (regnum));
+	break;
+
+      case 5:			/* Register */
+	fprintf_unfiltered (stream, REGISTER_NAME (regnum));
+	break;
+
+      case 7:			/* Autodecrement */
+	fputc_unfiltered ('-', stream);
+      case 6:			/* Register deferred */
+	fprintf_unfiltered (stream, "(%s)", REGISTER_NAME (regnum));
+	break;
+
+      case 9:	                /* Absolute Address & Autoincrement deferred */
+	fputc_unfiltered ('*', stream);
+	if (regnum == PC_REGNUM)
+	  {
+	    temp1 = *p;
+	    temp1 <<= 8;
+	    temp1 |= *(p +1);
+
+	    fputc_unfiltered ('$', stream);
+	    print_address (temp1, stream);
+	    p += 4;
+	    break;
+	  }
+      case 8:			/*Immediate & Autoincrement SP */
+        if (regnum == 8)         /*88 is Immediate Byte Mode*/
+	  fprintf_unfiltered (stream, "$%d", *p++);
+
+	else if (regnum == 9)        /*89 is Immediate Word Mode*/
+	  {
+	    temp1 = *p;
+	    temp1 <<= 8; 
+	    temp1 |= *(p +1);
+	    fprintf_unfiltered (stream, "$%d", temp1);
+	    p += 2;
+	  }  
+
+	else if (regnum == PC_REGNUM)    /*8F is Immediate Long Mode*/
+	  {
+	    temp1 = *p;
+	    temp1 <<=8;
+	    temp1 |= *(p +1);
+	    temp1 <<=8;
+	    temp1 |= *(p +2);
+	    temp1 <<= 8;
+	    temp1 |= *(p +3);
+	    fprintf_unfiltered (stream, "$%d", temp1);
+	    p += 4;
+	  }
+
+	else                            /*8E is Autoincrement SP Mode*/
+	      fprintf_unfiltered (stream, "(%s)+", REGISTER_NAME (regnum));
+	break;
+
+      case 11:			/* Register + Byte Displacement Deferred Mode*/
+	fputc_unfiltered ('*', stream);
+      case 10:			/* Register + Byte Displacement Mode*/
+	if (regnum == PC_REGNUM)
+	  print_address (addr + *p + 2, stream);
+	else
+	  fprintf_unfiltered (stream, "%d(%s)", *p, REGISTER_NAME (regnum));
+	p += 1;
+	break;
+
+      case 13:			/* Register + Word Displacement Deferred Mode*/
+	fputc_unfiltered ('*', stream);
+      case 12:			/* Register + Word Displacement Mode*/
+	temp1 = *p;
+	temp1 <<= 8;
+	temp1 |= *(p +1);
+	if (regnum == PC_REGNUM)
+	  print_address (addr + temp1 + 3, stream);
+	else
+	  fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum));
+	p += 2;
+	break;
+
+      case 15:			/* Register + Long Displacement Deferred Mode*/
+	fputc_unfiltered ('*', stream);
+      case 14:			/* Register + Long Displacement Mode*/
+	temp1 = *p;
+	temp1 <<= 8;
+	temp1 |= *(p +1);
+	temp1 <<= 8;
+	temp1 |= *(p +2);
+	temp1 <<= 8;
+	temp1 |= *(p +3);
+	if (regnum == PC_REGNUM)
+	  print_address (addr + temp1 + 5, stream);
+	else
+	  fprintf_unfiltered (stream, "%d(%s)", temp1, REGISTER_NAME (regnum));
+	p += 4;
+      }
+
+  return (unsigned char *) p;
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/target.c b/gdb/target.c
new file mode 100644
index 0000000..808eb8f
--- /dev/null
+++ b/gdb/target.c
@@ -0,0 +1,2581 @@
+/* Select target systems and architectures at runtime for GDB.
+   Copyright 1990, 1992-1995, 1998, 1999 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <errno.h>
+#include <ctype.h>
+#include "gdb_string.h"
+#include "target.h"
+#include "gdbcmd.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "wait.h"
+#include <signal.h>
+
+extern int errno;
+
+static void
+target_info PARAMS ((char *, int));
+
+static void
+cleanup_target PARAMS ((struct target_ops *));
+
+static void
+maybe_kill_then_create_inferior PARAMS ((char *, char *, char **));
+
+static void
+default_clone_and_follow_inferior PARAMS ((int, int *));
+
+static void
+maybe_kill_then_attach PARAMS ((char *, int));
+
+static void
+kill_or_be_killed PARAMS ((int));
+
+static void
+default_terminal_info PARAMS ((char *, int));
+
+static int
+nosymbol PARAMS ((char *, CORE_ADDR *));
+
+static void
+tcomplain PARAMS ((void));
+
+static int
+nomemory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+static int
+return_zero PARAMS ((void));
+
+static int
+return_one PARAMS ((void));
+
+void
+target_ignore PARAMS ((void));
+
+static void
+target_command PARAMS ((char *, int));
+
+static struct target_ops *
+find_default_run_target PARAMS ((char *));
+
+static void
+update_current_target PARAMS ((void));
+
+/* Transfer LEN bytes between target address MEMADDR and GDB address MYADDR.
+   Returns 0 for success, errno code for failure (which includes partial
+   transfers--if you want a more useful response to partial transfers, try
+   target_read_memory_partial).  */
+
+static int
+target_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
+			    int write, asection *bfd_section));
+
+static void init_dummy_target PARAMS ((void));
+
+static void
+debug_to_open PARAMS ((char *, int));
+
+static void
+debug_to_close PARAMS ((int));
+
+static void
+debug_to_attach PARAMS ((char *, int));
+
+static void
+debug_to_detach PARAMS ((char *, int));
+
+static void
+debug_to_resume PARAMS ((int, int, enum target_signal));
+
+static int
+debug_to_wait PARAMS ((int, struct target_waitstatus *));
+
+static void
+debug_to_fetch_registers PARAMS ((int));
+
+static void
+debug_to_store_registers PARAMS ((int));
+
+static void
+debug_to_prepare_to_store PARAMS ((void));
+
+static int
+debug_to_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+static void
+debug_to_files_info PARAMS ((struct target_ops *));
+
+static int
+debug_to_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int
+debug_to_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static void
+debug_to_terminal_init PARAMS ((void));
+
+static void
+debug_to_terminal_inferior PARAMS ((void));
+
+static void
+debug_to_terminal_ours_for_output PARAMS ((void));
+
+static void
+debug_to_terminal_ours PARAMS ((void));
+
+static void
+debug_to_terminal_info PARAMS ((char *, int));
+
+static void
+debug_to_kill PARAMS ((void));
+
+static void
+debug_to_load PARAMS ((char *, int));
+
+static int
+debug_to_lookup_symbol PARAMS ((char *, CORE_ADDR *));
+
+static void
+debug_to_create_inferior PARAMS ((char *, char *, char **));
+
+static void
+debug_to_mourn_inferior PARAMS ((void));
+
+static int
+debug_to_can_run PARAMS ((void));
+
+static void
+debug_to_notice_signals PARAMS ((int));
+
+static int
+debug_to_thread_alive PARAMS ((int));
+
+static void
+debug_to_stop PARAMS ((void));
+
+static int debug_to_query PARAMS ((int/*char*/, char *, char *, int *));
+
+/* Pointer to array of target architecture structures; the size of the
+   array; the current index into the array; the allocated size of the 
+   array.  */
+struct target_ops **target_structs;
+unsigned target_struct_size;
+unsigned target_struct_index;
+unsigned target_struct_allocsize;
+#define	DEFAULT_ALLOCSIZE	10
+
+/* The initial current target, so that there is always a semi-valid
+   current target.  */
+
+static struct target_ops dummy_target;
+
+/* Top of target stack.  */
+
+struct target_stack_item *target_stack;
+
+/* The target structure we are currently using to talk to a process
+   or file or whatever "inferior" we have.  */
+
+struct target_ops current_target;
+
+/* Command list for target.  */
+
+static struct cmd_list_element *targetlist = NULL;
+
+/* Nonzero if we are debugging an attached outside process
+   rather than an inferior.  */
+
+int attach_flag;
+
+#ifdef MAINTENANCE_CMDS
+/* Non-zero if we want to see trace of target level stuff.  */
+
+static int targetdebug = 0;
+
+static void setup_target_debug PARAMS ((void));
+
+#endif
+
+/* The user just typed 'target' without the name of a target.  */
+
+/* ARGSUSED */
+static void
+target_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  fputs_filtered ("Argument required (target name).  Try `help target'\n",
+		  gdb_stdout);
+}
+
+/* Add a possible target architecture to the list.  */
+
+void
+add_target (t)
+     struct target_ops *t;
+{
+  if (!target_structs)
+    {
+      target_struct_allocsize = DEFAULT_ALLOCSIZE;
+      target_structs = (struct target_ops **) xmalloc
+	(target_struct_allocsize * sizeof (*target_structs));
+    }
+  if (target_struct_size >= target_struct_allocsize)
+    {
+      target_struct_allocsize *= 2;
+      target_structs = (struct target_ops **)
+	  xrealloc ((char *) target_structs, 
+		    target_struct_allocsize * sizeof (*target_structs));
+    }
+  target_structs[target_struct_size++] = t;
+/*  cleanup_target (t);*/
+
+  if (targetlist == NULL)
+    add_prefix_cmd ("target", class_run, target_command,
+		    "Connect to a target machine or process.\n\
+The first argument is the type or protocol of the target machine.\n\
+Remaining arguments are interpreted by the target protocol.  For more\n\
+information on the arguments for a particular protocol, type\n\
+`help target ' followed by the protocol name.",
+		    &targetlist, "target ", 0, &cmdlist);
+  add_cmd (t->to_shortname, no_class, t->to_open, t->to_doc, &targetlist);
+}
+
+/* Stub functions */
+
+void
+target_ignore ()
+{
+}
+
+/* ARGSUSED */
+static int
+nomemory (memaddr, myaddr, len, write, t)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *t;
+{
+  errno = EIO;		/* Can't read/write this location */
+  return 0;		/* No bytes handled */
+}
+
+static void
+tcomplain ()
+{
+  error ("You can't do that when your target is `%s'",
+	 current_target.to_shortname);
+}
+
+void
+noprocess ()
+{
+  error ("You can't do that without a process to debug.");
+}
+
+/* ARGSUSED */
+static int
+nosymbol (name, addrp)
+     char *name;
+     CORE_ADDR *addrp;
+{
+  return 1;		/* Symbol does not exist in target env */
+}
+
+/* ARGSUSED */
+void
+nosupport_runtime ()
+{
+  if (!inferior_pid)
+    noprocess ();
+  else
+    error ("No run-time support for this");
+}
+
+
+/* ARGSUSED */
+static void
+default_terminal_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered("No saved terminal information.\n");
+}
+
+/* This is the default target_create_inferior and target_attach function.
+   If the current target is executing, it asks whether to kill it off.
+   If this function returns without calling error(), it has killed off
+   the target, and the operation should be attempted.  */
+
+static void
+kill_or_be_killed (from_tty)
+     int from_tty;
+{
+  if (target_has_execution)
+    {
+      printf_unfiltered ("You are already running a program:\n");
+      target_files_info ();
+      if (query ("Kill it? ")) {
+	target_kill ();
+	if (target_has_execution)
+	  error ("Killing the program did not help.");
+	return;
+      } else {
+	error ("Program not killed.");
+      }
+    }
+  tcomplain();
+}
+
+static void
+maybe_kill_then_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  kill_or_be_killed (from_tty);
+  target_attach (args, from_tty);
+}
+
+static void
+maybe_kill_then_create_inferior (exec, args, env)
+     char *exec;
+     char *args;
+     char **env;
+{
+  kill_or_be_killed (0);
+  target_create_inferior (exec, args, env);
+}
+
+static void
+default_clone_and_follow_inferior (child_pid, followed_child)
+  int  child_pid;
+  int  *followed_child;
+{
+  target_clone_and_follow_inferior (child_pid, followed_child);
+}
+
+/* Clean up a target struct so it no longer has any zero pointers in it.
+   We default entries, at least to stubs that print error messages.  */
+
+static void
+cleanup_target (t)
+     struct target_ops *t;
+{
+
+#define de_fault(field, value) \
+  if (!t->field)	t->field = value
+
+  /*        FIELD			DEFAULT VALUE        */
+
+  de_fault (to_open, 			(void (*) PARAMS((char *, int))) tcomplain);
+  de_fault (to_close, 			(void (*) PARAMS((int))) target_ignore);
+  de_fault (to_attach, 			maybe_kill_then_attach);
+  de_fault (to_post_attach,             (void (*) PARAMS ((int))) target_ignore);
+  de_fault (to_require_attach,          maybe_kill_then_attach);
+  de_fault (to_detach, 			(void (*) PARAMS((char *, int))) target_ignore);
+  de_fault (to_require_detach,          (void (*) PARAMS((int, char *, int))) target_ignore);
+  de_fault (to_resume, 			(void (*) PARAMS((int, int, enum target_signal))) noprocess);
+  de_fault (to_wait, 			(int (*) PARAMS((int, struct target_waitstatus *))) noprocess);
+  de_fault (to_post_wait,               (void (*) PARAMS ((int, int))) target_ignore);
+  de_fault (to_fetch_registers, 	(void (*) PARAMS((int))) target_ignore);
+  de_fault (to_store_registers,		(void (*) PARAMS((int))) noprocess);
+  de_fault (to_prepare_to_store,	(void (*) PARAMS((void))) noprocess);
+  de_fault (to_xfer_memory,		(int (*) PARAMS((CORE_ADDR, char *, int, int, struct target_ops *))) nomemory);
+  de_fault (to_files_info,		(void (*) PARAMS((struct target_ops *))) target_ignore);
+  de_fault (to_insert_breakpoint,	memory_insert_breakpoint);
+  de_fault (to_remove_breakpoint,	memory_remove_breakpoint);
+  de_fault (to_terminal_init,		(void (*) PARAMS((void))) target_ignore);
+  de_fault (to_terminal_inferior,	(void (*) PARAMS ((void))) target_ignore);
+  de_fault (to_terminal_ours_for_output,(void (*) PARAMS ((void))) target_ignore);
+  de_fault (to_terminal_ours,		(void (*) PARAMS ((void))) target_ignore);
+  de_fault (to_terminal_info,		default_terminal_info);
+  de_fault (to_kill,			(void (*) PARAMS((void))) noprocess);
+  de_fault (to_load,			(void (*) PARAMS((char *, int))) tcomplain);
+  de_fault (to_lookup_symbol,		(int (*) PARAMS ((char *, CORE_ADDR *))) nosymbol);
+  de_fault (to_create_inferior,		maybe_kill_then_create_inferior);
+  de_fault (to_post_startup_inferior,   (void (*) PARAMS ((int))) target_ignore);
+  de_fault (to_acknowledge_created_inferior,            (void (*) PARAMS((int))) target_ignore);
+  de_fault (to_clone_and_follow_inferior,               default_clone_and_follow_inferior);
+  de_fault (to_post_follow_inferior_by_clone,           (void (*) PARAMS ((void))) target_ignore);
+  de_fault (to_insert_fork_catchpoint,  (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_remove_fork_catchpoint,  (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_insert_vfork_catchpoint, (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_remove_vfork_catchpoint, (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_has_forked,              (int (*) PARAMS ((int, int *))) return_zero);
+  de_fault (to_has_vforked,             (int (*) PARAMS ((int, int *))) return_zero);
+  de_fault (to_can_follow_vfork_prior_to_exec, (int (*) PARAMS ((void ))) return_zero);
+  de_fault (to_post_follow_vfork,       (void (*) PARAMS ((int, int, int, int))) target_ignore);
+  de_fault (to_insert_exec_catchpoint,  (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_remove_exec_catchpoint,  (int (*) PARAMS ((int))) tcomplain);
+  de_fault (to_has_execd,               (int (*) PARAMS ((int, char **))) return_zero);
+  de_fault (to_reported_exec_events_per_exec_call, (int (*) PARAMS ((void))) return_one);
+  de_fault (to_has_syscall_event,       (int (*) PARAMS ((int, enum target_waitkind *, int *))) return_zero);
+  de_fault (to_has_exited,              (int (*) PARAMS ((int, int, int *))) return_zero);
+  de_fault (to_mourn_inferior,		(void (*) PARAMS ((void))) noprocess);
+  de_fault (to_can_run,			return_zero);
+  de_fault (to_notice_signals,		(void (*) PARAMS((int))) target_ignore);
+  de_fault (to_thread_alive,		(int (*) PARAMS((int))) target_ignore);
+  de_fault (to_stop,			(void (*) PARAMS((void))) target_ignore);
+  de_fault (to_query,			(int (*) PARAMS((int/*char*/, char*, char *, int *))) target_ignore);
+  de_fault (to_enable_exception_callback,	(struct symtab_and_line * (*) PARAMS((enum exception_event_kind, int))) nosupport_runtime);
+  de_fault (to_get_current_exception_event,	(struct exception_event_record * (*) PARAMS((void))) nosupport_runtime);
+
+  de_fault (to_pid_to_exec_file,        (char* (*) PARAMS((int))) return_zero);
+  de_fault (to_core_file_to_sym_file,   (char* (*) PARAMS ((char *))) return_zero);
+#undef de_fault
+}
+
+/* Go through the target stack from top to bottom, copying over zero entries in
+   current_target.  In effect, we are doing class inheritance through the
+   pushed target vectors.  */
+
+static void
+update_current_target ()
+{
+  struct target_stack_item *item;
+  struct target_ops *t;
+
+  /* First, reset current_target */
+  memset (&current_target, 0, sizeof current_target);
+
+  for (item = target_stack; item; item = item->next)
+    {
+      t = item->target_ops;
+
+#define INHERIT(FIELD, TARGET) \
+      if (!current_target.FIELD) \
+	current_target.FIELD = TARGET->FIELD
+
+      INHERIT (to_shortname, t);
+      INHERIT (to_longname, t);
+      INHERIT (to_doc, t);
+      INHERIT (to_open, t);
+      INHERIT (to_close, t);
+      INHERIT (to_attach, t);
+      INHERIT (to_post_attach, t);
+      INHERIT (to_require_attach, t);
+      INHERIT (to_detach, t);
+      INHERIT (to_require_detach, t);
+      INHERIT (to_resume, t);
+      INHERIT (to_wait, t);
+      INHERIT (to_post_wait, t);
+      INHERIT (to_fetch_registers, t);
+      INHERIT (to_store_registers, t);
+      INHERIT (to_prepare_to_store, t);
+      INHERIT (to_xfer_memory, t);
+      INHERIT (to_files_info, t);
+      INHERIT (to_insert_breakpoint, t);
+      INHERIT (to_remove_breakpoint, t);
+      INHERIT (to_terminal_init, t);
+      INHERIT (to_terminal_inferior, t);
+      INHERIT (to_terminal_ours_for_output, t);
+      INHERIT (to_terminal_ours, t);
+      INHERIT (to_terminal_info, t);
+      INHERIT (to_kill, t);
+      INHERIT (to_load, t);
+      INHERIT (to_lookup_symbol, t);
+      INHERIT (to_create_inferior, t);
+      INHERIT (to_post_startup_inferior, t);
+      INHERIT (to_acknowledge_created_inferior, t);
+      INHERIT (to_clone_and_follow_inferior, t);
+      INHERIT (to_post_follow_inferior_by_clone, t);
+      INHERIT (to_insert_fork_catchpoint, t);
+      INHERIT (to_remove_fork_catchpoint, t);
+      INHERIT (to_insert_vfork_catchpoint, t);
+      INHERIT (to_remove_vfork_catchpoint, t);
+      INHERIT (to_has_forked, t);
+      INHERIT (to_has_vforked, t);
+      INHERIT (to_can_follow_vfork_prior_to_exec, t);
+      INHERIT (to_post_follow_vfork, t);
+      INHERIT (to_insert_exec_catchpoint, t);
+      INHERIT (to_remove_exec_catchpoint, t);
+      INHERIT (to_has_execd, t);
+      INHERIT (to_reported_exec_events_per_exec_call, t);
+      INHERIT (to_has_syscall_event, t);
+      INHERIT (to_has_exited, t);
+      INHERIT (to_mourn_inferior, t);
+      INHERIT (to_can_run, t);
+      INHERIT (to_notice_signals, t);
+      INHERIT (to_thread_alive, t);
+      INHERIT (to_stop, t);
+      INHERIT (to_query, t);
+      INHERIT (to_enable_exception_callback, t);
+      INHERIT (to_get_current_exception_event, t);
+      INHERIT (to_pid_to_exec_file, t);
+      INHERIT (to_core_file_to_sym_file, t);
+      INHERIT (to_stratum, t);
+      INHERIT (DONT_USE, t);
+      INHERIT (to_has_all_memory, t);
+      INHERIT (to_has_memory, t);
+      INHERIT (to_has_stack, t);
+      INHERIT (to_has_registers, t);
+      INHERIT (to_has_execution, t);
+      INHERIT (to_has_thread_control, t);
+      INHERIT (to_sections, t);
+      INHERIT (to_sections_end, t);
+      INHERIT (to_magic, t);
+
+#undef INHERIT
+    }
+}
+
+/* Push a new target type into the stack of the existing target accessors,
+   possibly superseding some of the existing accessors.
+
+   Result is zero if the pushed target ended up on top of the stack,
+   nonzero if at least one target is on top of it.
+
+   Rather than allow an empty stack, we always have the dummy target at
+   the bottom stratum, so we can call the function vectors without
+   checking them.  */
+
+int
+push_target (t)
+     struct target_ops *t;
+{
+  struct target_stack_item *cur, *prev, *tmp;
+
+  /* Check magic number.  If wrong, it probably means someone changed
+     the struct definition, but not all the places that initialize one.  */
+  if (t->to_magic != OPS_MAGIC)
+    {
+      fprintf_unfiltered(gdb_stderr,
+			 "Magic number of %s target struct wrong\n", 
+			 t->to_shortname);
+      abort();
+    }
+
+  /* Find the proper stratum to install this target in. */
+
+  for (prev = NULL, cur = target_stack; cur; prev = cur, cur = cur->next)
+    {
+      if ((int)(t->to_stratum) >= (int)(cur->target_ops->to_stratum))
+	break;
+    }
+
+  /* If there's already targets at this stratum, remove them. */
+
+  if (cur)
+    while (t->to_stratum == cur->target_ops->to_stratum)
+      {
+	/* There's already something on this stratum.  Close it off.  */
+	if (cur->target_ops->to_close)
+	  (cur->target_ops->to_close) (0);
+	if (prev)
+	  prev->next = cur->next; /* Unchain old target_ops */
+	else
+	  target_stack = cur->next; /* Unchain first on list */
+	tmp = cur->next;
+	free (cur);
+	cur = tmp;
+      }
+
+  /* We have removed all targets in our stratum, now add the new one.  */
+
+  tmp = (struct target_stack_item *)
+    xmalloc (sizeof (struct target_stack_item));
+  tmp->next = cur;
+  tmp->target_ops = t;
+
+  if (prev)
+    prev->next = tmp;
+  else
+    target_stack = tmp;
+
+  update_current_target ();
+
+  cleanup_target (&current_target); /* Fill in the gaps */
+
+#ifdef MAINTENANCE_CMDS
+  if (targetdebug)
+    setup_target_debug ();
+#endif
+
+  return prev != 0;
+}
+
+/* Remove a target_ops vector from the stack, wherever it may be. 
+   Return how many times it was removed (0 or 1).  */
+
+int
+unpush_target (t)
+     struct target_ops *t;
+{
+  struct target_stack_item *cur, *prev;
+
+  if (t->to_close)
+    t->to_close (0);		/* Let it clean up */
+
+  /* Look for the specified target.  Note that we assume that a target
+     can only occur once in the target stack. */
+
+  for (cur = target_stack, prev = NULL; cur; prev = cur, cur = cur->next)
+    if (cur->target_ops == t)
+      break;
+
+  if (!cur)
+    return 0;			/* Didn't find target_ops, quit now */
+
+  /* Unchain the target */
+
+  if (!prev)
+    target_stack = cur->next;
+  else
+    prev->next = cur->next;
+
+  free (cur);			/* Release the target_stack_item */
+
+  update_current_target ();
+  cleanup_target (&current_target);
+
+  return 1;
+}
+
+void
+pop_target ()
+{
+  (current_target.to_close)(0);	/* Let it clean up */
+  if (unpush_target (target_stack->target_ops) == 1)
+    return;
+
+  fprintf_unfiltered(gdb_stderr,
+		     "pop_target couldn't find target %s\n", 
+		     current_target.to_shortname);
+  abort();
+}
+
+#undef	MIN
+#define MIN(A, B) (((A) <= (B)) ? (A) : (B))
+
+/* target_read_string -- read a null terminated string, up to LEN bytes,
+   from MEMADDR in target.  Set *ERRNOP to the errno code, or 0 if successful.
+   Set *STRING to a pointer to malloc'd memory containing the data; the caller
+   is responsible for freeing it.  Return the number of bytes successfully
+   read.  */
+
+int
+target_read_string (memaddr, string, len, errnop)
+     CORE_ADDR memaddr;
+     char **string;
+     int len;
+     int *errnop;
+{
+  int tlen, origlen, offset, i;
+  char buf[4];
+  int errcode = 0;
+  char *buffer;
+  int buffer_allocated;
+  char *bufptr;
+  unsigned int nbytes_read = 0;
+
+  /* Small for testing.  */
+  buffer_allocated = 4;
+  buffer = xmalloc (buffer_allocated);
+  bufptr = buffer;
+
+  origlen = len;
+
+  while (len > 0)
+    {
+      tlen = MIN (len, 4 - (memaddr & 3));
+      offset = memaddr & 3;
+
+      errcode = target_xfer_memory (memaddr & ~3, buf, 4, 0, NULL);
+      if (errcode != 0)
+	{
+	  /* The transfer request might have crossed the boundary to an
+	     unallocated region of memory. Retry the transfer, requesting
+	     a single byte.  */
+	  tlen = 1;
+	  offset = 0;
+	  errcode = target_xfer_memory (memaddr, buf, 1, 0, NULL);
+	  if (errcode != 0)
+	    goto done;
+	}
+
+      if (bufptr - buffer + tlen > buffer_allocated)
+	{
+	  unsigned int bytes;
+	  bytes = bufptr - buffer;
+	  buffer_allocated *= 2;
+	  buffer = xrealloc (buffer, buffer_allocated);
+	  bufptr = buffer + bytes;
+	}
+
+      for (i = 0; i < tlen; i++)
+	{
+	  *bufptr++ = buf[i + offset];
+	  if (buf[i + offset] == '\000')
+	    {
+	      nbytes_read += i + 1;
+	      goto done;
+	    }
+	}
+
+      memaddr += tlen;
+      len -= tlen;
+      nbytes_read += tlen;
+    }
+ done:
+  if (errnop != NULL)
+    *errnop = errcode;
+  if (string != NULL)
+    *string = buffer;
+  return nbytes_read;
+}
+
+/* Read LEN bytes of target memory at address MEMADDR, placing the results in
+   GDB's memory at MYADDR.  Returns either 0 for success or an errno value
+   if any error occurs.
+
+   If an error occurs, no guarantee is made about the contents of the data at
+   MYADDR.  In particular, the caller should not depend upon partial reads
+   filling the buffer with good data.  There is no way for the caller to know
+   how much good data might have been transfered anyway.  Callers that can
+   deal with partial reads should call target_read_memory_partial. */
+
+int
+target_read_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  return target_xfer_memory (memaddr, myaddr, len, 0, NULL);
+}
+
+int
+target_read_memory_section (memaddr, myaddr, len, bfd_section)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     asection *bfd_section;
+{
+  return target_xfer_memory (memaddr, myaddr, len, 0, bfd_section);
+}
+
+/* Read LEN bytes of target memory at address MEMADDR, placing the results
+   in GDB's memory at MYADDR.  Returns a count of the bytes actually read,
+   and optionally an errno value in the location pointed to by ERRNOPTR
+   if ERRNOPTR is non-null. */
+
+int
+target_read_memory_partial (memaddr, myaddr, len, errnoptr)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int *errnoptr;
+{
+  int nread;	/* Number of bytes actually read. */
+  int errcode;	/* Error from last read. */
+
+  /* First try a complete read. */
+  errcode = target_xfer_memory (memaddr, myaddr, len, 0, NULL);
+  if (errcode == 0)
+    {
+      /* Got it all. */
+      nread = len;
+    }
+  else
+    {
+      /* Loop, reading one byte at a time until we get as much as we can. */
+      for (errcode = 0, nread = 0; len > 0 && errcode == 0; nread++, len--)
+	{
+	  errcode = target_xfer_memory (memaddr++, myaddr++, 1, 0, NULL);
+	}
+      /* If an error, the last read was unsuccessful, so adjust count. */
+      if (errcode != 0)
+	{
+	  nread--;
+	}
+    }
+  if (errnoptr != NULL)
+    {
+      *errnoptr = errcode;
+    }
+  return (nread);
+}
+
+int
+target_write_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  return target_xfer_memory (memaddr, myaddr, len, 1, NULL);
+}
+ 
+/* This variable is used to pass section information down to targets.  This
+   *should* be done by adding an argument to the target_xfer_memory function
+   of all the targets, but I didn't feel like changing 50+ files.  */
+
+asection *target_memory_bfd_section = NULL;
+
+/* Move memory to or from the targets.  Iterate until all of it has
+   been moved, if necessary.  The top target gets priority; anything
+   it doesn't want, is offered to the next one down, etc.  Note the
+   business with curlen:  if an early target says "no, but I have a
+   boundary overlapping this xfer" then we shorten what we offer to
+   the subsequent targets so the early guy will get a chance at the
+   tail before the subsequent ones do. 
+
+   Result is 0 or errno value.  */
+
+static int
+target_xfer_memory (memaddr, myaddr, len, write, bfd_section)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     asection *bfd_section;
+{
+  int curlen;
+  int res;
+  struct target_ops *t;
+  struct target_stack_item *item;
+
+  /* Zero length requests are ok and require no work.  */
+  if (len == 0)
+    return 0;
+
+  target_memory_bfd_section = bfd_section;
+
+  /* to_xfer_memory is not guaranteed to set errno, even when it returns
+     0.  */
+  errno = 0;
+
+  /* The quick case is that the top target does it all.  */
+  res = current_target.to_xfer_memory
+			(memaddr, myaddr, len, write, &current_target);
+  if (res == len)
+    return 0;
+
+  if (res > 0)
+    goto bump;
+  /* If res <= 0 then we call it again in the loop.  Ah well.  */
+
+  for (; len > 0;)
+    {
+      curlen = len;		/* Want to do it all */
+      for (item = target_stack; item; item = item->next)
+	{
+	  t = item->target_ops;
+	  if (!t->to_has_memory)
+	    continue;
+
+	  res = t->to_xfer_memory (memaddr, myaddr, curlen, write, t);
+	  if (res > 0)
+	    break;		/* Handled all or part of xfer */
+	  if (t->to_has_all_memory)
+	    break;
+	}
+
+      if (res <= 0)
+	{
+	  /* If this address is for nonexistent memory,
+	     read zeros if reading, or do nothing if writing.  Return error. */
+	  if (!write)
+	    memset (myaddr, 0, len);
+	  if (errno == 0)
+	    return EIO;
+	  else
+	    return errno;
+	}
+bump:
+      memaddr += res;
+      myaddr  += res;
+      len     -= res;
+    }
+  return 0;			/* We managed to cover it all somehow. */
+}
+
+
+/* ARGSUSED */
+static void
+target_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct target_ops *t;
+  struct target_stack_item *item;
+  int has_all_mem = 0;
+  
+  if (symfile_objfile != NULL)
+    printf_unfiltered ("Symbols from \"%s\".\n", symfile_objfile->name);
+
+#ifdef FILES_INFO_HOOK
+  if (FILES_INFO_HOOK ())
+    return;
+#endif
+
+  for (item = target_stack; item; item = item->next)
+    {
+      t = item->target_ops;
+
+      if (!t->to_has_memory)
+	continue;
+
+      if ((int)(t->to_stratum) <= (int)dummy_stratum)
+	continue;
+      if (has_all_mem)
+	printf_unfiltered("\tWhile running this, GDB does not access memory from...\n");
+      printf_unfiltered("%s:\n", t->to_longname);
+      (t->to_files_info)(t);
+      has_all_mem = t->to_has_all_memory;
+    }
+}
+
+/* This is to be called by the open routine before it does
+   anything.  */
+
+void
+target_preopen (from_tty)
+     int from_tty;
+{
+  dont_repeat();
+
+  if (target_has_execution)
+    {   
+      if (query ("A program is being debugged already.  Kill it? "))
+        target_kill ();
+      else
+        error ("Program not killed.");
+    }
+
+  /* Calling target_kill may remove the target from the stack.  But if
+     it doesn't (which seems like a win for UDI), remove it now.  */
+
+  if (target_has_execution)
+    pop_target ();
+}
+
+/* Detach a target after doing deferred register stores.  */
+
+void
+target_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* Handle any optimized stores to the inferior.  */
+#ifdef DO_DEFERRED_STORES
+  DO_DEFERRED_STORES;
+#endif
+  (current_target.to_detach) (args, from_tty);
+}
+
+void
+target_link (modname, t_reloc)
+     char *modname;
+     CORE_ADDR *t_reloc;
+{
+  if (STREQ(current_target.to_shortname, "rombug"))
+    {
+      (current_target.to_lookup_symbol) (modname, t_reloc);
+      if (*t_reloc == 0)
+      error("Unable to link to %s and get relocation in rombug", modname);
+    }
+  else
+    *t_reloc = (CORE_ADDR)-1;
+}
+
+/* Look through the list of possible targets for a target that can
+   execute a run or attach command without any other data.  This is
+   used to locate the default process stratum.
+
+   Result is always valid (error() is called for errors).  */
+
+static struct target_ops *
+find_default_run_target (do_mesg)
+     char *do_mesg;
+{
+  struct target_ops **t;
+  struct target_ops *runable = NULL;
+  int count;
+
+  count = 0;
+
+  for (t = target_structs; t < target_structs + target_struct_size;
+       ++t)
+    {
+      if ((*t)->to_can_run && target_can_run(*t))
+	{
+	  runable = *t;
+	  ++count;
+	}
+    }
+
+  if (count != 1)
+    error ("Don't know how to %s.  Try \"help target\".", do_mesg);
+
+  return runable;
+}
+
+void
+find_default_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct target_ops *t;
+
+  t = find_default_run_target("attach");
+  (t->to_attach) (args, from_tty);
+  return;
+}
+
+void
+find_default_require_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct target_ops *t;
+
+  t = find_default_run_target("require_attach");
+  (t->to_require_attach) (args, from_tty);
+  return;
+}
+
+void
+find_default_require_detach (pid, args, from_tty)
+  int  pid;
+  char *  args;
+  int  from_tty;
+{
+  struct target_ops *t;
+
+  t = find_default_run_target("require_detach");
+  (t->to_require_detach) (pid, args, from_tty);
+  return;
+}
+
+void
+find_default_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  struct target_ops *t;
+
+  t = find_default_run_target("run");
+  (t->to_create_inferior) (exec_file, allargs, env);
+  return;
+}
+
+void
+find_default_clone_and_follow_inferior (child_pid, followed_child)
+  int  child_pid;
+  int  *followed_child;
+{
+  struct target_ops *t;
+
+  t = find_default_run_target("run");
+  (t->to_clone_and_follow_inferior) (child_pid, followed_child);
+  return;
+}
+
+static int
+return_zero ()
+{
+  return 0;
+}
+
+static int
+return_one ()
+{
+  return 1;
+}
+
+struct target_ops *
+find_core_target ()
+{
+  struct target_ops **t;
+  struct target_ops *runable = NULL;
+  int count;
+  
+  count = 0;
+  
+  for (t = target_structs; t < target_structs + target_struct_size;
+       ++t)
+    {
+      if ((*t)->to_stratum == core_stratum)
+	{
+	  runable = *t;
+	  ++count;
+	}
+    }
+  
+  return(count == 1 ? runable : NULL);
+}
+
+/* The inferior process has died.  Long live the inferior!  */
+
+void
+generic_mourn_inferior ()
+{
+  extern int show_breakpoint_hit_counts;
+
+  inferior_pid = 0;
+  attach_flag = 0;
+  breakpoint_init_inferior (inf_exited);
+  registers_changed ();
+
+#ifdef CLEAR_DEFERRED_STORES
+  /* Delete any pending stores to the inferior... */
+  CLEAR_DEFERRED_STORES;
+#endif
+
+  reopen_exec_file ();
+  reinit_frame_cache ();
+
+  /* It is confusing to the user for ignore counts to stick around
+     from previous runs of the inferior.  So clear them.  */
+  /* However, it is more confusing for the ignore counts to disappear when
+     using hit counts.  So don't clear them if we're counting hits.  */
+  if (!show_breakpoint_hit_counts)
+    breakpoint_clear_ignore_counts ();
+}
+
+/* This table must match in order and size the signals in enum target_signal
+   in target.h.  */
+static struct {
+  char *name;
+  char *string;
+  } signals [] =
+{
+  {"0", "Signal 0"},
+  {"SIGHUP", "Hangup"},
+  {"SIGINT", "Interrupt"},
+  {"SIGQUIT", "Quit"},
+  {"SIGILL", "Illegal instruction"},
+  {"SIGTRAP", "Trace/breakpoint trap"},
+  {"SIGABRT", "Aborted"},
+  {"SIGEMT", "Emulation trap"},
+  {"SIGFPE", "Arithmetic exception"},
+  {"SIGKILL", "Killed"},
+  {"SIGBUS", "Bus error"},
+  {"SIGSEGV", "Segmentation fault"},
+  {"SIGSYS", "Bad system call"},
+  {"SIGPIPE", "Broken pipe"},
+  {"SIGALRM", "Alarm clock"},
+  {"SIGTERM", "Terminated"},
+  {"SIGURG", "Urgent I/O condition"},
+  {"SIGSTOP", "Stopped (signal)"},
+  {"SIGTSTP", "Stopped (user)"},
+  {"SIGCONT", "Continued"},
+  {"SIGCHLD", "Child status changed"},
+  {"SIGTTIN", "Stopped (tty input)"},
+  {"SIGTTOU", "Stopped (tty output)"},
+  {"SIGIO", "I/O possible"},
+  {"SIGXCPU", "CPU time limit exceeded"},
+  {"SIGXFSZ", "File size limit exceeded"},
+  {"SIGVTALRM", "Virtual timer expired"},
+  {"SIGPROF", "Profiling timer expired"},
+  {"SIGWINCH", "Window size changed"},
+  {"SIGLOST", "Resource lost"},
+  {"SIGUSR1", "User defined signal 1"},
+  {"SIGUSR2", "User defined signal 2"},
+  {"SIGPWR", "Power fail/restart"},
+  {"SIGPOLL", "Pollable event occurred"},
+  {"SIGWIND", "SIGWIND"},
+  {"SIGPHONE", "SIGPHONE"},
+  {"SIGWAITING", "Process's LWPs are blocked"},
+  {"SIGLWP", "Signal LWP"},
+  {"SIGDANGER", "Swap space dangerously low"},
+  {"SIGGRANT", "Monitor mode granted"},
+  {"SIGRETRACT", "Need to relinquish monitor mode"},
+  {"SIGMSG", "Monitor mode data available"},
+  {"SIGSOUND", "Sound completed"},
+  {"SIGSAK", "Secure attention"},
+  {"SIGPRIO", "SIGPRIO"},
+  {"SIG33", "Real-time event 33"},
+  {"SIG34", "Real-time event 34"},
+  {"SIG35", "Real-time event 35"},
+  {"SIG36", "Real-time event 36"},
+  {"SIG37", "Real-time event 37"},
+  {"SIG38", "Real-time event 38"},
+  {"SIG39", "Real-time event 39"},
+  {"SIG40", "Real-time event 40"},
+  {"SIG41", "Real-time event 41"},
+  {"SIG42", "Real-time event 42"},
+  {"SIG43", "Real-time event 43"},
+  {"SIG44", "Real-time event 44"},
+  {"SIG45", "Real-time event 45"},
+  {"SIG46", "Real-time event 46"},
+  {"SIG47", "Real-time event 47"},
+  {"SIG48", "Real-time event 48"},
+  {"SIG49", "Real-time event 49"},
+  {"SIG50", "Real-time event 50"},
+  {"SIG51", "Real-time event 51"},
+  {"SIG52", "Real-time event 52"},
+  {"SIG53", "Real-time event 53"},
+  {"SIG54", "Real-time event 54"},
+  {"SIG55", "Real-time event 55"},
+  {"SIG56", "Real-time event 56"},
+  {"SIG57", "Real-time event 57"},
+  {"SIG58", "Real-time event 58"},
+  {"SIG59", "Real-time event 59"},
+  {"SIG60", "Real-time event 60"},
+  {"SIG61", "Real-time event 61"},
+  {"SIG62", "Real-time event 62"},
+  {"SIG63", "Real-time event 63"},
+
+#if defined(MACH) || defined(__MACH__)
+  /* Mach exceptions */
+  {"EXC_BAD_ACCESS", "Could not access memory"},
+  {"EXC_BAD_INSTRUCTION", "Illegal instruction/operand"},
+  {"EXC_ARITHMETIC", "Arithmetic exception"},
+  {"EXC_EMULATION", "Emulation instruction"},
+  {"EXC_SOFTWARE", "Software generated exception"},
+  {"EXC_BREAKPOINT", "Breakpoint"},
+#endif
+  {NULL, "Unknown signal"},
+  {NULL, "Internal error: printing TARGET_SIGNAL_DEFAULT"},
+
+  /* Last entry, used to check whether the table is the right size.  */
+  {NULL, "TARGET_SIGNAL_MAGIC"}
+};
+
+/* Return the string for a signal.  */
+char *
+target_signal_to_string (sig)
+     enum target_signal sig;
+{
+  return signals[sig].string;
+}
+
+/* Return the name for a signal.  */
+char *
+target_signal_to_name (sig)
+     enum target_signal sig;
+{
+  if (sig == TARGET_SIGNAL_UNKNOWN)
+    /* I think the code which prints this will always print it along with
+       the string, so no need to be verbose.  */
+    return "?";
+  return signals[sig].name;
+}
+
+/* Given a name, return its signal.  */
+enum target_signal
+target_signal_from_name (name)
+     char *name;
+{
+  enum target_signal sig;
+
+  /* It's possible we also should allow "SIGCLD" as well as "SIGCHLD"
+     for TARGET_SIGNAL_SIGCHLD.  SIGIOT, on the other hand, is more
+     questionable; seems like by now people should call it SIGABRT
+     instead.  */
+
+  /* This ugly cast brought to you by the native VAX compiler.  */
+  for (sig = TARGET_SIGNAL_HUP;
+       signals[sig].name != NULL;
+       sig = (enum target_signal)((int)sig + 1))
+    if (STREQ (name, signals[sig].name))
+      return sig;
+  return TARGET_SIGNAL_UNKNOWN;
+}
+
+/* The following functions are to help certain targets deal
+   with the signal/waitstatus stuff.  They could just as well be in
+   a file called native-utils.c or unixwaitstatus-utils.c or whatever.  */
+
+/* Convert host signal to our signals.  */
+enum target_signal
+target_signal_from_host (hostsig)
+     int hostsig;
+{
+  /* A switch statement would make sense but would require special kludges
+     to deal with the cases where more than one signal has the same number.  */
+
+  if (hostsig == 0) return TARGET_SIGNAL_0;
+
+#if defined (SIGHUP)
+  if (hostsig == SIGHUP) return TARGET_SIGNAL_HUP;
+#endif
+#if defined (SIGINT)
+  if (hostsig == SIGINT) return TARGET_SIGNAL_INT;
+#endif
+#if defined (SIGQUIT)
+  if (hostsig == SIGQUIT) return TARGET_SIGNAL_QUIT;
+#endif
+#if defined (SIGILL)
+  if (hostsig == SIGILL) return TARGET_SIGNAL_ILL;
+#endif
+#if defined (SIGTRAP)
+  if (hostsig == SIGTRAP) return TARGET_SIGNAL_TRAP;
+#endif
+#if defined (SIGABRT)
+  if (hostsig == SIGABRT) return TARGET_SIGNAL_ABRT;
+#endif
+#if defined (SIGEMT)
+  if (hostsig == SIGEMT) return TARGET_SIGNAL_EMT;
+#endif
+#if defined (SIGFPE)
+  if (hostsig == SIGFPE) return TARGET_SIGNAL_FPE;
+#endif
+#if defined (SIGKILL)
+  if (hostsig == SIGKILL) return TARGET_SIGNAL_KILL;
+#endif
+#if defined (SIGBUS)
+  if (hostsig == SIGBUS) return TARGET_SIGNAL_BUS;
+#endif
+#if defined (SIGSEGV)
+  if (hostsig == SIGSEGV) return TARGET_SIGNAL_SEGV;
+#endif
+#if defined (SIGSYS)
+  if (hostsig == SIGSYS) return TARGET_SIGNAL_SYS;
+#endif
+#if defined (SIGPIPE)
+  if (hostsig == SIGPIPE) return TARGET_SIGNAL_PIPE;
+#endif
+#if defined (SIGALRM)
+  if (hostsig == SIGALRM) return TARGET_SIGNAL_ALRM;
+#endif
+#if defined (SIGTERM)
+  if (hostsig == SIGTERM) return TARGET_SIGNAL_TERM;
+#endif
+#if defined (SIGUSR1)
+  if (hostsig == SIGUSR1) return TARGET_SIGNAL_USR1;
+#endif
+#if defined (SIGUSR2)
+  if (hostsig == SIGUSR2) return TARGET_SIGNAL_USR2;
+#endif
+#if defined (SIGCLD)
+  if (hostsig == SIGCLD) return TARGET_SIGNAL_CHLD;
+#endif
+#if defined (SIGCHLD)
+  if (hostsig == SIGCHLD) return TARGET_SIGNAL_CHLD;
+#endif
+#if defined (SIGPWR)
+  if (hostsig == SIGPWR) return TARGET_SIGNAL_PWR;
+#endif
+#if defined (SIGWINCH)
+  if (hostsig == SIGWINCH) return TARGET_SIGNAL_WINCH;
+#endif
+#if defined (SIGURG)
+  if (hostsig == SIGURG) return TARGET_SIGNAL_URG;
+#endif
+#if defined (SIGIO)
+  if (hostsig == SIGIO) return TARGET_SIGNAL_IO;
+#endif
+#if defined (SIGPOLL)
+  if (hostsig == SIGPOLL) return TARGET_SIGNAL_POLL;
+#endif
+#if defined (SIGSTOP)
+  if (hostsig == SIGSTOP) return TARGET_SIGNAL_STOP;
+#endif
+#if defined (SIGTSTP)
+  if (hostsig == SIGTSTP) return TARGET_SIGNAL_TSTP;
+#endif
+#if defined (SIGCONT)
+  if (hostsig == SIGCONT) return TARGET_SIGNAL_CONT;
+#endif
+#if defined (SIGTTIN)
+  if (hostsig == SIGTTIN) return TARGET_SIGNAL_TTIN;
+#endif
+#if defined (SIGTTOU)
+  if (hostsig == SIGTTOU) return TARGET_SIGNAL_TTOU;
+#endif
+#if defined (SIGVTALRM)
+  if (hostsig == SIGVTALRM) return TARGET_SIGNAL_VTALRM;
+#endif
+#if defined (SIGPROF)
+  if (hostsig == SIGPROF) return TARGET_SIGNAL_PROF;
+#endif
+#if defined (SIGXCPU)
+  if (hostsig == SIGXCPU) return TARGET_SIGNAL_XCPU;
+#endif
+#if defined (SIGXFSZ)
+  if (hostsig == SIGXFSZ) return TARGET_SIGNAL_XFSZ;
+#endif
+#if defined (SIGWIND)
+  if (hostsig == SIGWIND) return TARGET_SIGNAL_WIND;
+#endif
+#if defined (SIGPHONE)
+  if (hostsig == SIGPHONE) return TARGET_SIGNAL_PHONE;
+#endif
+#if defined (SIGLOST)
+  if (hostsig == SIGLOST) return TARGET_SIGNAL_LOST;
+#endif
+#if defined (SIGWAITING)
+  if (hostsig == SIGWAITING) return TARGET_SIGNAL_WAITING;
+#endif
+#if defined (SIGLWP)
+  if (hostsig == SIGLWP) return TARGET_SIGNAL_LWP;
+#endif
+#if defined (SIGDANGER)
+  if (hostsig == SIGDANGER) return TARGET_SIGNAL_DANGER;
+#endif
+#if defined (SIGGRANT)
+  if (hostsig == SIGGRANT) return TARGET_SIGNAL_GRANT;
+#endif
+#if defined (SIGRETRACT)
+  if (hostsig == SIGRETRACT) return TARGET_SIGNAL_RETRACT;
+#endif
+#if defined (SIGMSG)
+  if (hostsig == SIGMSG) return TARGET_SIGNAL_MSG;
+#endif
+#if defined (SIGSOUND)
+  if (hostsig == SIGSOUND) return TARGET_SIGNAL_SOUND;
+#endif
+#if defined (SIGSAK)
+  if (hostsig == SIGSAK) return TARGET_SIGNAL_SAK;
+#endif
+#if defined (SIGPRIO)
+  if (hostsig == SIGPRIO) return TARGET_SIGNAL_PRIO;
+#endif
+
+  /* Mach exceptions.  Assumes that the values for EXC_ are positive! */
+#if defined (EXC_BAD_ACCESS) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_BAD_ACCESS) return TARGET_EXC_BAD_ACCESS;
+#endif
+#if defined (EXC_BAD_INSTRUCTION) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_BAD_INSTRUCTION) return TARGET_EXC_BAD_INSTRUCTION;
+#endif
+#if defined (EXC_ARITHMETIC) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_ARITHMETIC) return TARGET_EXC_ARITHMETIC;
+#endif
+#if defined (EXC_EMULATION) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_EMULATION) return TARGET_EXC_EMULATION;
+#endif
+#if defined (EXC_SOFTWARE) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_SOFTWARE) return TARGET_EXC_SOFTWARE;
+#endif
+#if defined (EXC_BREAKPOINT) && defined (_NSIG)
+  if (hostsig == _NSIG + EXC_BREAKPOINT) return TARGET_EXC_BREAKPOINT;
+#endif
+
+#if defined (REALTIME_LO)
+  if (hostsig >= REALTIME_LO && hostsig < REALTIME_HI)
+    return (enum target_signal)
+      (hostsig - 33 + (int) TARGET_SIGNAL_REALTIME_33);
+#endif
+  return TARGET_SIGNAL_UNKNOWN;
+}
+
+int
+target_signal_to_host (oursig)
+     enum target_signal oursig;
+{
+  switch (oursig)
+    {
+    case TARGET_SIGNAL_0: return 0;
+
+#if defined (SIGHUP)
+    case TARGET_SIGNAL_HUP: return SIGHUP;
+#endif
+#if defined (SIGINT)
+    case TARGET_SIGNAL_INT: return SIGINT;
+#endif
+#if defined (SIGQUIT)
+    case TARGET_SIGNAL_QUIT: return SIGQUIT;
+#endif
+#if defined (SIGILL)
+    case TARGET_SIGNAL_ILL: return SIGILL;
+#endif
+#if defined (SIGTRAP)
+    case TARGET_SIGNAL_TRAP: return SIGTRAP;
+#endif
+#if defined (SIGABRT)
+    case TARGET_SIGNAL_ABRT: return SIGABRT;
+#endif
+#if defined (SIGEMT)
+    case TARGET_SIGNAL_EMT: return SIGEMT;
+#endif
+#if defined (SIGFPE)
+    case TARGET_SIGNAL_FPE: return SIGFPE;
+#endif
+#if defined (SIGKILL)
+    case TARGET_SIGNAL_KILL: return SIGKILL;
+#endif
+#if defined (SIGBUS)
+    case TARGET_SIGNAL_BUS: return SIGBUS;
+#endif
+#if defined (SIGSEGV)
+    case TARGET_SIGNAL_SEGV: return SIGSEGV;
+#endif
+#if defined (SIGSYS)
+    case TARGET_SIGNAL_SYS: return SIGSYS;
+#endif
+#if defined (SIGPIPE)
+    case TARGET_SIGNAL_PIPE: return SIGPIPE;
+#endif
+#if defined (SIGALRM)
+    case TARGET_SIGNAL_ALRM: return SIGALRM;
+#endif
+#if defined (SIGTERM)
+    case TARGET_SIGNAL_TERM: return SIGTERM;
+#endif
+#if defined (SIGUSR1)
+    case TARGET_SIGNAL_USR1: return SIGUSR1;
+#endif
+#if defined (SIGUSR2)
+    case TARGET_SIGNAL_USR2: return SIGUSR2;
+#endif
+#if defined (SIGCHLD) || defined (SIGCLD)
+    case TARGET_SIGNAL_CHLD: 
+#if defined (SIGCHLD)
+      return SIGCHLD;
+#else
+      return SIGCLD;
+#endif
+#endif /* SIGCLD or SIGCHLD */
+#if defined (SIGPWR)
+    case TARGET_SIGNAL_PWR: return SIGPWR;
+#endif
+#if defined (SIGWINCH)
+    case TARGET_SIGNAL_WINCH: return SIGWINCH;
+#endif
+#if defined (SIGURG)
+    case TARGET_SIGNAL_URG: return SIGURG;
+#endif
+#if defined (SIGIO)
+    case TARGET_SIGNAL_IO: return SIGIO;
+#endif
+#if defined (SIGPOLL)
+    case TARGET_SIGNAL_POLL: return SIGPOLL;
+#endif
+#if defined (SIGSTOP)
+    case TARGET_SIGNAL_STOP: return SIGSTOP;
+#endif
+#if defined (SIGTSTP)
+    case TARGET_SIGNAL_TSTP: return SIGTSTP;
+#endif
+#if defined (SIGCONT)
+    case TARGET_SIGNAL_CONT: return SIGCONT;
+#endif
+#if defined (SIGTTIN)
+    case TARGET_SIGNAL_TTIN: return SIGTTIN;
+#endif
+#if defined (SIGTTOU)
+    case TARGET_SIGNAL_TTOU: return SIGTTOU;
+#endif
+#if defined (SIGVTALRM)
+    case TARGET_SIGNAL_VTALRM: return SIGVTALRM;
+#endif
+#if defined (SIGPROF)
+    case TARGET_SIGNAL_PROF: return SIGPROF;
+#endif
+#if defined (SIGXCPU)
+    case TARGET_SIGNAL_XCPU: return SIGXCPU;
+#endif
+#if defined (SIGXFSZ)
+    case TARGET_SIGNAL_XFSZ: return SIGXFSZ;
+#endif
+#if defined (SIGWIND)
+    case TARGET_SIGNAL_WIND: return SIGWIND;
+#endif
+#if defined (SIGPHONE)
+    case TARGET_SIGNAL_PHONE: return SIGPHONE;
+#endif
+#if defined (SIGLOST)
+    case TARGET_SIGNAL_LOST: return SIGLOST;
+#endif
+#if defined (SIGWAITING)
+    case TARGET_SIGNAL_WAITING: return SIGWAITING;
+#endif
+#if defined (SIGLWP)
+    case TARGET_SIGNAL_LWP: return SIGLWP;
+#endif
+#if defined (SIGDANGER)
+    case TARGET_SIGNAL_DANGER: return SIGDANGER;
+#endif
+#if defined (SIGGRANT)
+    case TARGET_SIGNAL_GRANT: return SIGGRANT;
+#endif
+#if defined (SIGRETRACT)
+    case TARGET_SIGNAL_RETRACT: return SIGRETRACT;
+#endif
+#if defined (SIGMSG)
+    case TARGET_SIGNAL_MSG: return SIGMSG;
+#endif
+#if defined (SIGSOUND)
+    case TARGET_SIGNAL_SOUND: return SIGSOUND;
+#endif
+#if defined (SIGSAK)
+    case TARGET_SIGNAL_SAK: return SIGSAK;
+#endif
+#if defined (SIGPRIO)
+    case TARGET_SIGNAL_PRIO: return SIGPRIO;
+#endif
+
+      /* Mach exceptions.  Assumes that the values for EXC_ are positive! */
+#if defined (EXC_BAD_ACCESS) && defined (_NSIG)
+    case TARGET_EXC_BAD_ACCESS: return _NSIG + EXC_BAD_ACCESS;
+#endif
+#if defined (EXC_BAD_INSTRUCTION) && defined (_NSIG)
+    case TARGET_EXC_BAD_INSTRUCTION: return _NSIG + EXC_BAD_INSTRUCTION;
+#endif
+#if defined (EXC_ARITHMETIC) && defined (_NSIG)
+    case TARGET_EXC_ARITHMETIC: return _NSIG + EXC_ARITHMETIC;
+#endif
+#if defined (EXC_EMULATION) && defined (_NSIG)
+    case TARGET_EXC_EMULATION: return _NSIG + EXC_EMULATION;
+#endif
+#if defined (EXC_SOFTWARE) && defined (_NSIG)
+    case TARGET_EXC_SOFTWARE: return _NSIG + EXC_SOFTWARE;
+#endif
+#if defined (EXC_BREAKPOINT) && defined (_NSIG)
+    case TARGET_EXC_BREAKPOINT: return _NSIG + EXC_BREAKPOINT;
+#endif
+
+    default:
+#if defined (REALTIME_LO)
+      if (oursig >= TARGET_SIGNAL_REALTIME_33
+	  && oursig <= TARGET_SIGNAL_REALTIME_63)
+	{
+	  int retsig =
+	    (int)oursig - (int)TARGET_SIGNAL_REALTIME_33 + REALTIME_LO;
+	  if (retsig < REALTIME_HI)
+	    return retsig;
+	}
+#endif
+      /* The user might be trying to do "signal SIGSAK" where this system
+	 doesn't have SIGSAK.  */
+      warning ("Signal %s does not exist on this system.\n",
+	       target_signal_to_name (oursig));
+      return 0;
+    }
+}
+
+/* Helper function for child_wait and the Lynx derivatives of child_wait.
+   HOSTSTATUS is the waitstatus from wait() or the equivalent; store our
+   translation of that in OURSTATUS.  */
+void
+store_waitstatus (ourstatus, hoststatus)
+     struct target_waitstatus *ourstatus;
+     int hoststatus;
+{
+#ifdef CHILD_SPECIAL_WAITSTATUS
+  /* CHILD_SPECIAL_WAITSTATUS should return nonzero and set *OURSTATUS
+     if it wants to deal with hoststatus.  */
+  if (CHILD_SPECIAL_WAITSTATUS (ourstatus, hoststatus))
+    return;
+#endif
+
+  if (WIFEXITED (hoststatus))
+    {
+      ourstatus->kind = TARGET_WAITKIND_EXITED;
+      ourstatus->value.integer = WEXITSTATUS (hoststatus);
+    }
+  else if (!WIFSTOPPED (hoststatus))
+    {
+      ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
+      ourstatus->value.sig = target_signal_from_host (WTERMSIG (hoststatus));
+    }
+  else
+    {
+      ourstatus->kind = TARGET_WAITKIND_STOPPED;
+      ourstatus->value.sig = target_signal_from_host (WSTOPSIG (hoststatus));
+    }
+}
+
+/* In some circumstances we allow a command to specify a numeric
+   signal.  The idea is to keep these circumstances limited so that
+   users (and scripts) develop portable habits.  For comparison,
+   POSIX.2 `kill' requires that 1,2,3,6,9,14, and 15 work (and using a
+   numeric signal at all is obscelescent.  We are slightly more
+   lenient and allow 1-15 which should match host signal numbers on
+   most systems.  Use of symbolic signal names is strongly encouraged.  */
+
+enum target_signal
+target_signal_from_command (num)
+     int num;
+{
+  if (num >= 1 && num <= 15)
+    return (enum target_signal)num;
+  error ("Only signals 1-15 are valid as numeric signals.\n\
+Use \"info signals\" for a list of symbolic signals.");
+}
+
+/* Returns zero to leave the inferior alone, one to interrupt it.  */
+int (*target_activity_function) PARAMS ((void));
+int target_activity_fd;
+
+/* Convert a normal process ID to a string.  Returns the string in a static
+   buffer.  */
+
+char *
+normal_pid_to_str (pid)
+     int pid;
+{
+  static char buf[30];
+
+  if (STREQ (current_target.to_shortname, "remote"))
+    sprintf (buf, "thread %d\0", pid);
+  else
+    sprintf (buf, "process %d\0", pid);
+
+  return buf;
+}
+
+/* Some targets (such as ttrace-based HPUX) don't allow us to request
+   notification of inferior events such as fork and vork immediately
+   after the inferior is created.  (This because of how gdb gets an
+   inferior created via invoking a shell to do it.  In such a scenario,
+   if the shell init file has commands in it, the shell will fork and
+   exec for each of those commands, and we will see each such fork
+   event.  Very bad.)
+   
+   This function is used by all targets that allow us to request
+   notification of forks, etc at inferior creation time; e.g., in
+   target_acknowledge_forked_child.
+   */
+void
+normal_target_post_startup_inferior (pid)
+  int  pid;
+{
+  /* This space intentionally left blank. */
+}
+
+/* Set up the handful of non-empty slots needed by the dummy target
+   vector.  */
+
+static void
+init_dummy_target ()
+{
+  dummy_target.to_shortname = "None";
+  dummy_target.to_longname = "None";
+  dummy_target.to_doc = "";
+  dummy_target.to_attach = find_default_attach;
+  dummy_target.to_require_attach = find_default_require_attach;
+  dummy_target.to_require_detach = find_default_require_detach;
+  dummy_target.to_create_inferior = find_default_create_inferior;
+  dummy_target.to_clone_and_follow_inferior = find_default_clone_and_follow_inferior;
+  dummy_target.to_stratum = dummy_stratum;
+  dummy_target.to_magic = OPS_MAGIC;
+}
+
+
+#ifdef MAINTENANCE_CMDS
+static struct target_ops debug_target;
+
+static void
+debug_to_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  debug_target.to_open (args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr, "target_open (%s, %d)\n", args, from_tty);
+}
+
+static void
+debug_to_close (quitting)
+     int quitting;
+{
+  debug_target.to_close (quitting);
+
+  fprintf_unfiltered (gdb_stderr, "target_close (%d)\n", quitting);
+}
+
+static void
+debug_to_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  debug_target.to_attach (args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr, "target_attach (%s, %d)\n", args, from_tty);
+}
+
+
+static void
+debug_to_post_attach (pid)
+  int  pid;
+{
+  debug_target.to_post_attach (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_post_attach (%d)\n", pid);
+}
+
+static void
+debug_to_require_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  debug_target.to_require_attach (args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_require_attach (%s, %d)\n", args, from_tty);
+}
+
+static void
+debug_to_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  debug_target.to_detach (args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr, "target_detach (%s, %d)\n", args, from_tty);
+}
+
+static void
+debug_to_require_detach (pid, args, from_tty)
+  int  pid;
+  char *  args;
+  int  from_tty;
+{
+  debug_target.to_require_detach (pid, args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_require_detach (%d, %s, %d)\n", pid, args, from_tty);
+}
+
+static void
+debug_to_resume (pid, step, siggnal)
+     int pid;
+     int step;
+     enum target_signal siggnal;
+{
+  debug_target.to_resume (pid, step, siggnal);
+
+  fprintf_unfiltered (gdb_stderr, "target_resume (%d, %s, %s)\n", pid,
+		      step ? "step" : "continue",
+		      target_signal_to_name (siggnal));
+}
+
+static int
+debug_to_wait (pid, status)
+     int pid;
+     struct target_waitstatus *status;
+{
+  int retval;
+
+  retval = debug_target.to_wait (pid, status);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_wait (%d, status) = %d,   ", pid, retval);
+  fprintf_unfiltered (gdb_stderr, "status->kind = ");
+  switch (status->kind)
+    {
+    case TARGET_WAITKIND_EXITED:
+      fprintf_unfiltered (gdb_stderr, "exited, status = %d\n",
+			  status->value.integer);
+      break;
+    case TARGET_WAITKIND_STOPPED:
+      fprintf_unfiltered (gdb_stderr, "stopped, signal = %s\n",
+			  target_signal_to_name (status->value.sig));
+      break;
+    case TARGET_WAITKIND_SIGNALLED:
+      fprintf_unfiltered (gdb_stderr, "signalled, signal = %s\n",
+			  target_signal_to_name (status->value.sig));
+      break;
+    case TARGET_WAITKIND_LOADED:
+      fprintf_unfiltered (gdb_stderr, "loaded\n");
+      break;
+    case TARGET_WAITKIND_FORKED:
+      fprintf_unfiltered (gdb_stderr, "forked\n");
+      break;
+    case TARGET_WAITKIND_VFORKED:
+      fprintf_unfiltered (gdb_stderr, "vforked\n");
+      break;
+    case TARGET_WAITKIND_EXECD:
+      fprintf_unfiltered (gdb_stderr, "execd\n");
+      break;
+    case TARGET_WAITKIND_SPURIOUS:
+      fprintf_unfiltered (gdb_stderr, "spurious\n");
+      break;
+    default:
+      fprintf_unfiltered (gdb_stderr, "unknown???\n");
+      break;
+    }
+
+  return retval;
+}
+
+static void
+debug_to_post_wait (pid, status)
+  int  pid;
+  int  status;
+{
+  debug_target.to_post_wait (pid, status);
+
+  fprintf_unfiltered (gdb_stderr, "target_post_wait (%d, %d)\n",
+		      pid, status);
+}
+
+static void
+debug_to_fetch_registers (regno)
+     int regno;
+{
+  debug_target.to_fetch_registers (regno);
+
+  fprintf_unfiltered (gdb_stderr, "target_fetch_registers (%s)",
+		      regno != -1 ? REGISTER_NAME (regno) : "-1");
+  if (regno != -1)
+    fprintf_unfiltered (gdb_stderr, " = 0x%x %d",
+			(unsigned long) read_register (regno),
+			read_register (regno));
+  fprintf_unfiltered (gdb_stderr, "\n");
+}
+
+static void
+debug_to_store_registers (regno)
+     int regno;
+{
+  debug_target.to_store_registers (regno);
+
+  if (regno >= 0 && regno < NUM_REGS)
+    fprintf_unfiltered (gdb_stderr, "target_store_registers (%s) = 0x%x %d\n",
+			REGISTER_NAME (regno),
+			(unsigned long) read_register (regno),
+			(unsigned long) read_register (regno));
+  else
+    fprintf_unfiltered (gdb_stderr, "target_store_registers (%d)\n", regno);
+}
+
+static void
+debug_to_prepare_to_store ()
+{
+  debug_target.to_prepare_to_store ();
+
+  fprintf_unfiltered (gdb_stderr, "target_prepare_to_store ()\n");
+}
+
+static int
+debug_to_xfer_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;
+{
+  int retval;
+
+  retval = debug_target.to_xfer_memory (memaddr, myaddr, len, write, target);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_xfer_memory (0x%x, xxx, %d, %s, xxx) = %d",
+		      (unsigned int) memaddr, /* possable truncate long long */
+		      len, write ? "write" : "read", retval);
+
+  
+
+  if (retval > 0)
+    {
+      int i;
+
+      fputs_unfiltered (", bytes =", gdb_stderr);
+      for (i = 0; i < retval; i++)
+	{
+	  if ((((long) &(myaddr[i])) & 0xf) == 0)
+	    fprintf_unfiltered (gdb_stderr, "\n");
+	  fprintf_unfiltered (gdb_stderr, " %02x", myaddr[i] & 0xff);
+	}
+    }
+
+  fputc_unfiltered ('\n', gdb_stderr);
+
+  return retval;
+}
+
+static void
+debug_to_files_info (target)
+     struct target_ops *target;
+{
+  debug_target.to_files_info (target);
+
+  fprintf_unfiltered (gdb_stderr, "target_files_info (xxx)\n");
+}
+
+static int
+debug_to_insert_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;
+{
+  int retval;
+
+  retval = debug_target.to_insert_breakpoint (addr, save);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_insert_breakpoint (0x%x, xxx) = %d\n",
+		      (unsigned long) addr, retval);
+  return retval;
+}
+
+static int
+debug_to_remove_breakpoint (addr, save)
+     CORE_ADDR addr;
+     char *save;
+{
+  int retval;
+
+  retval = debug_target.to_remove_breakpoint (addr, save);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_remove_breakpoint (0x%x, xxx) = %d\n",
+		      (unsigned long)addr, retval);
+  return retval;
+}
+
+static void
+debug_to_terminal_init ()
+{
+  debug_target.to_terminal_init ();
+
+  fprintf_unfiltered (gdb_stderr, "target_terminal_init ()\n");
+}
+
+static void
+debug_to_terminal_inferior ()
+{
+  debug_target.to_terminal_inferior ();
+
+  fprintf_unfiltered (gdb_stderr, "target_terminal_inferior ()\n");
+}
+
+static void
+debug_to_terminal_ours_for_output ()
+{
+  debug_target.to_terminal_ours_for_output ();
+
+  fprintf_unfiltered (gdb_stderr, "target_terminal_ours_for_output ()\n");
+}
+
+static void
+debug_to_terminal_ours ()
+{
+  debug_target.to_terminal_ours ();
+
+  fprintf_unfiltered (gdb_stderr, "target_terminal_ours ()\n");
+}
+
+static void
+debug_to_terminal_info (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  debug_target.to_terminal_info (arg, from_tty);
+
+  fprintf_unfiltered (gdb_stderr, "target_terminal_info (%s, %d)\n", arg,
+		      from_tty);
+}
+
+static void
+debug_to_kill ()
+{
+  debug_target.to_kill ();
+
+  fprintf_unfiltered (gdb_stderr, "target_kill ()\n");
+}
+
+static void
+debug_to_load (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  debug_target.to_load (args, from_tty);
+
+  fprintf_unfiltered (gdb_stderr, "target_load (%s, %d)\n", args, from_tty);
+}
+
+static int
+debug_to_lookup_symbol (name, addrp)
+     char *name;
+     CORE_ADDR *addrp;
+{
+  int retval;
+
+  retval = debug_target.to_lookup_symbol (name, addrp);
+
+  fprintf_unfiltered (gdb_stderr, "target_lookup_symbol (%s, xxx)\n", name);
+
+  return retval;
+}
+
+static void
+debug_to_create_inferior (exec_file, args, env)
+     char *exec_file;
+     char *args;
+     char **env;
+{
+  debug_target.to_create_inferior (exec_file, args, env);
+
+  fprintf_unfiltered (gdb_stderr, "target_create_inferior (%s, %s, xxx)\n",
+		      exec_file, args);
+}
+
+static void
+debug_to_post_startup_inferior (pid)
+  int  pid;
+{
+  debug_target.to_post_startup_inferior (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_post_startup_inferior (%d)\n",
+		      pid);
+}
+
+static void
+debug_to_acknowledge_created_inferior (pid)
+  int  pid;
+{
+  debug_target.to_acknowledge_created_inferior (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_acknowledge_created_inferior (%d)\n",
+		      pid);
+}
+
+static void
+debug_to_clone_and_follow_inferior (child_pid, followed_child)
+  int  child_pid;
+  int  *followed_child;
+{
+  debug_target.to_clone_and_follow_inferior (child_pid, followed_child);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_clone_and_follow_inferior (%d, %d)\n",
+		      child_pid, *followed_child);
+}
+
+static void
+debug_to_post_follow_inferior_by_clone ()
+{
+  debug_target.to_post_follow_inferior_by_clone ();
+
+  fprintf_unfiltered (gdb_stderr, "target_post_follow_inferior_by_clone ()\n");
+}
+
+static int
+debug_to_insert_fork_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_insert_fork_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_insert_fork_catchpoint (%d) = %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_remove_fork_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_remove_fork_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_remove_fork_catchpoint (%d) = %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_insert_vfork_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_insert_vfork_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_insert_vfork_catchpoint (%d)= %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_remove_vfork_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_remove_vfork_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_remove_vfork_catchpoint (%d) = %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_has_forked (pid, child_pid)
+  int  pid;
+  int *  child_pid;
+{
+  int  has_forked;
+
+  has_forked = debug_target.to_has_forked (pid, child_pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_has_forked (%d, %d) = %d\n",
+                      pid, *child_pid, has_forked);
+
+  return has_forked;
+}
+
+static int
+debug_to_has_vforked (pid, child_pid)
+  int  pid;
+  int *  child_pid;
+{
+  int  has_vforked;
+
+  has_vforked = debug_target.to_has_vforked (pid, child_pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_has_vforked (%d, %d) = %d\n",
+                      pid, *child_pid, has_vforked);
+
+  return has_vforked;
+}
+
+static int
+debug_to_can_follow_vfork_prior_to_exec ()
+{
+  int  can_immediately_follow_vfork;
+
+  can_immediately_follow_vfork = debug_target.to_can_follow_vfork_prior_to_exec ();
+
+  fprintf_unfiltered (gdb_stderr, "target_can_follow_vfork_prior_to_exec () = %d\n",
+                      can_immediately_follow_vfork);
+
+  return can_immediately_follow_vfork;
+}
+
+static void
+debug_to_post_follow_vfork (parent_pid, followed_parent, child_pid, followed_child)
+  int  parent_pid;
+  int  followed_parent;
+  int  child_pid;
+  int  followed_child;
+{
+  debug_target.to_post_follow_vfork (parent_pid, followed_parent, child_pid, followed_child);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_post_follow_vfork (%d, %d, %d, %d)\n",
+                      parent_pid, followed_parent, child_pid, followed_child);
+}
+
+static int
+debug_to_insert_exec_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_insert_exec_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_insert_exec_catchpoint (%d) = %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_remove_exec_catchpoint (pid)
+  int  pid;
+{
+  int  retval;
+
+  retval = debug_target.to_remove_exec_catchpoint (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_remove_exec_catchpoint (%d) = %d\n",
+                      pid, retval);
+
+  return retval;
+}
+
+static int
+debug_to_has_execd (pid, execd_pathname)
+  int  pid;
+  char **  execd_pathname;
+{
+  int  has_execd;
+
+  has_execd = debug_target.to_has_execd (pid, execd_pathname);
+
+  fprintf_unfiltered (gdb_stderr, "target_has_execd (%d, %s) = %d\n",
+                      pid, *execd_pathname, has_execd);
+
+  return has_execd;
+}
+
+static int
+debug_to_reported_exec_events_per_exec_call ()
+{
+  int  reported_exec_events;
+
+  reported_exec_events = debug_target.to_reported_exec_events_per_exec_call ();
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_reported_exec_events_per_exec_call () = %d\n",
+                      reported_exec_events);
+
+  return reported_exec_events;
+}
+
+static int
+debug_to_has_syscall_event (pid, kind, syscall_id)
+  int  pid;
+  enum target_waitkind *  kind;
+  int *  syscall_id;
+{
+  int  has_syscall_event;
+  char *  kind_spelling = "??";
+
+  has_syscall_event = debug_target.to_has_syscall_event (pid, kind, syscall_id);
+  if (has_syscall_event)
+    {
+      switch (*kind)
+        {
+          case TARGET_WAITKIND_SYSCALL_ENTRY:
+            kind_spelling = "SYSCALL_ENTRY";
+            break;
+          case TARGET_WAITKIND_SYSCALL_RETURN:
+            kind_spelling = "SYSCALL_RETURN";
+            break;
+          default:
+            break;
+        }
+    }
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target_has_syscall_event (%d, %s, %d) = %d\n",
+                      pid, kind_spelling, *syscall_id, has_syscall_event);
+
+  return has_syscall_event;
+}
+
+static int
+debug_to_has_exited (pid, wait_status, exit_status)
+  int  pid;
+  int  wait_status;
+  int *  exit_status;
+{
+  int  has_exited;
+
+  has_exited = debug_target.to_has_exited (pid, wait_status, exit_status);
+
+  fprintf_unfiltered (gdb_stderr, "target_has_exited (%d, %d, %d) = %d\n",
+                      pid, wait_status, *exit_status, has_exited);
+
+  return has_exited;
+}
+
+static void
+debug_to_mourn_inferior ()
+{
+  debug_target.to_mourn_inferior ();
+
+  fprintf_unfiltered (gdb_stderr, "target_mourn_inferior ()\n");
+}
+
+static int
+debug_to_can_run ()
+{
+  int retval;
+
+  retval = debug_target.to_can_run ();
+
+  fprintf_unfiltered (gdb_stderr, "target_can_run () = %d\n", retval);
+
+  return retval;
+}
+
+static void
+debug_to_notice_signals (pid)
+     int pid;
+{
+  debug_target.to_notice_signals (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_notice_signals (%d)\n", pid);
+}
+
+static int
+debug_to_thread_alive (pid)
+     int pid;
+{
+  int retval;
+
+  retval = debug_target.to_thread_alive (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_thread_alive (%d) = %d\n",
+		      pid, retval);
+
+  return retval;
+}
+
+static void
+debug_to_stop ()
+{
+  debug_target.to_stop ();
+
+  fprintf_unfiltered (gdb_stderr, "target_stop ()\n");
+}
+
+static int
+debug_to_query (type, req, resp, siz)
+  int type;
+  char *req;
+  char *resp;
+  int *siz;
+{
+  int retval;
+
+  retval = debug_target.to_query (type, req, resp, siz);
+
+  fprintf_unfiltered (gdb_stderr, "target_query (%c, %s, %s,  %d) = %d\n", type, req, resp, *siz, retval);
+
+  return retval;
+}
+
+static struct symtab_and_line *
+debug_to_enable_exception_callback (kind, enable)
+  enum exception_event_kind kind;
+  int enable;
+{
+  debug_target.to_enable_exception_callback (kind, enable);
+
+  fprintf_unfiltered (gdb_stderr,
+		      "target get_exception_callback_sal (%d, %d)\n",
+		      kind, enable);
+}
+
+static struct exception_event_record *
+debug_to_get_current_exception_event ()
+{
+  debug_target.to_get_current_exception_event();
+
+  fprintf_unfiltered (gdb_stderr, "target get_current_exception_event ()\n");
+}
+
+static char *
+debug_to_pid_to_exec_file (pid)
+  int  pid;
+{
+  char *  exec_file;
+
+  exec_file = debug_target.to_pid_to_exec_file (pid);
+
+  fprintf_unfiltered (gdb_stderr, "target_pid_to_exec_file (%d) = %s\n",
+                      pid, exec_file);
+
+  return exec_file;
+}
+
+static char *
+debug_to_core_file_to_sym_file (core)
+  char *  core;
+{
+  char *  sym_file;
+
+  sym_file = debug_target.to_core_file_to_sym_file (core);
+
+  fprintf_unfiltered (gdb_stderr, "target_core_file_to_sym_file (%s) = %s\n",
+                      core, sym_file);
+
+  return sym_file;
+}
+
+static void
+setup_target_debug ()
+{
+  memcpy (&debug_target, &current_target, sizeof debug_target);
+
+  current_target.to_open = debug_to_open;
+  current_target.to_close = debug_to_close;
+  current_target.to_attach = debug_to_attach;
+  current_target.to_post_attach = debug_to_post_attach;
+  current_target.to_require_attach = debug_to_require_attach;
+  current_target.to_detach = debug_to_detach;
+  current_target.to_require_detach = debug_to_require_detach;
+  current_target.to_resume = debug_to_resume;
+  current_target.to_wait = debug_to_wait;
+  current_target.to_post_wait = debug_to_post_wait;
+  current_target.to_fetch_registers = debug_to_fetch_registers;
+  current_target.to_store_registers = debug_to_store_registers;
+  current_target.to_prepare_to_store = debug_to_prepare_to_store;
+  current_target.to_xfer_memory = debug_to_xfer_memory;
+  current_target.to_files_info = debug_to_files_info;
+  current_target.to_insert_breakpoint = debug_to_insert_breakpoint;
+  current_target.to_remove_breakpoint = debug_to_remove_breakpoint;
+  current_target.to_terminal_init = debug_to_terminal_init;
+  current_target.to_terminal_inferior = debug_to_terminal_inferior;
+  current_target.to_terminal_ours_for_output = debug_to_terminal_ours_for_output;
+  current_target.to_terminal_ours = debug_to_terminal_ours;
+  current_target.to_terminal_info = debug_to_terminal_info;
+  current_target.to_kill = debug_to_kill;
+  current_target.to_load = debug_to_load;
+  current_target.to_lookup_symbol = debug_to_lookup_symbol;
+  current_target.to_create_inferior = debug_to_create_inferior;
+  current_target.to_post_startup_inferior = debug_to_post_startup_inferior;
+  current_target.to_acknowledge_created_inferior = debug_to_acknowledge_created_inferior;
+  current_target.to_clone_and_follow_inferior = debug_to_clone_and_follow_inferior;
+  current_target.to_post_follow_inferior_by_clone = debug_to_post_follow_inferior_by_clone;
+  current_target.to_insert_fork_catchpoint = debug_to_insert_fork_catchpoint;
+  current_target.to_remove_fork_catchpoint = debug_to_remove_fork_catchpoint;
+  current_target.to_insert_vfork_catchpoint = debug_to_insert_vfork_catchpoint;
+  current_target.to_remove_vfork_catchpoint = debug_to_remove_vfork_catchpoint;
+  current_target.to_has_forked = debug_to_has_forked;
+  current_target.to_has_vforked = debug_to_has_vforked;
+  current_target.to_can_follow_vfork_prior_to_exec = debug_to_can_follow_vfork_prior_to_exec;
+  current_target.to_post_follow_vfork = debug_to_post_follow_vfork;
+  current_target.to_insert_exec_catchpoint = debug_to_insert_exec_catchpoint;
+  current_target.to_remove_exec_catchpoint = debug_to_remove_exec_catchpoint;
+  current_target.to_has_execd = debug_to_has_execd;
+  current_target.to_reported_exec_events_per_exec_call = debug_to_reported_exec_events_per_exec_call;
+  current_target.to_has_syscall_event = debug_to_has_syscall_event;
+  current_target.to_has_exited = debug_to_has_exited;
+  current_target.to_mourn_inferior = debug_to_mourn_inferior;
+  current_target.to_can_run = debug_to_can_run;
+  current_target.to_notice_signals = debug_to_notice_signals;
+  current_target.to_thread_alive = debug_to_thread_alive;
+  current_target.to_stop = debug_to_stop;
+  current_target.to_query = debug_to_query;
+  current_target.to_enable_exception_callback = debug_to_enable_exception_callback;
+  current_target.to_get_current_exception_event = debug_to_get_current_exception_event;
+  current_target.to_pid_to_exec_file = debug_to_pid_to_exec_file;
+  current_target.to_core_file_to_sym_file = debug_to_core_file_to_sym_file;
+
+}
+#endif /* MAINTENANCE_CMDS */
+
+static char targ_desc[] = 
+    "Names of targets and files being debugged.\n\
+Shows the entire stack of targets currently in use (including the exec-file,\n\
+core-file, and process, if any), as well as the symbol file name.";
+
+void
+initialize_targets ()
+{
+  init_dummy_target ();
+  push_target (&dummy_target);
+
+  add_info ("target", target_info, targ_desc);
+  add_info ("files", target_info, targ_desc);
+
+#ifdef MAINTENANCE_CMDS
+  add_show_from_set (
+     add_set_cmd ("targetdebug", class_maintenance, var_zinteger,
+		  (char *)&targetdebug,
+		 "Set target debugging.\n\
+When non-zero, target debugging is enabled.", &setlist),
+		     &showlist);
+#endif
+
+  if (!STREQ (signals[TARGET_SIGNAL_LAST].string, "TARGET_SIGNAL_MAGIC"))
+    abort ();
+}
diff --git a/gdb/target.h b/gdb/target.h
new file mode 100644
index 0000000..21c3bab
--- /dev/null
+++ b/gdb/target.h
@@ -0,0 +1,1264 @@
+/* Interface between GDB and target environments, including files and processes
+   Copyright 1990, 91, 92, 93, 94, 1999 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by John Gilmore.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (TARGET_H)
+#define TARGET_H
+
+/* This include file defines the interface between the main part
+   of the debugger, and the part which is target-specific, or
+   specific to the communications interface between us and the
+   target.
+
+   A TARGET is an interface between the debugger and a particular 
+   kind of file or process.  Targets can be STACKED in STRATA, 
+   so that more than one target can potentially respond to a request.
+   In particular, memory accesses will walk down the stack of targets
+   until they find a target that is interested in handling that particular
+   address.  STRATA are artificial boundaries on the stack, within
+   which particular kinds of targets live.  Strata exist so that
+   people don't get confused by pushing e.g. a process target and then
+   a file target, and wondering why they can't see the current values
+   of variables any more (the file target is handling them and they
+   never get to the process target).  So when you push a file target,
+   it goes into the file stratum, which is always below the process
+   stratum.  */
+
+#include "bfd.h"
+#include "symtab.h"
+
+enum strata {
+	dummy_stratum,		/* The lowest of the low */
+	file_stratum,		/* Executable files, etc */
+	core_stratum,		/* Core dump files */
+	download_stratum,	/* Downloading of remote targets */
+	process_stratum		/* Executing processes */
+};
+
+enum thread_control_capabilities {
+	tc_none = 0, 		/* Default: can't control thread execution. */
+	tc_schedlock = 1,	/* Can lock the thread scheduler. */
+	tc_switch = 2 		/* Can switch the running thread on demand. */
+};
+
+/* Stuff for target_wait.  */
+
+/* Generally, what has the program done?  */
+enum target_waitkind {
+  /* The program has exited.  The exit status is in value.integer.  */
+  TARGET_WAITKIND_EXITED,
+
+  /* The program has stopped with a signal.  Which signal is in value.sig.  */
+  TARGET_WAITKIND_STOPPED,
+
+  /* The program has terminated with a signal.  Which signal is in
+     value.sig.  */
+  TARGET_WAITKIND_SIGNALLED,
+
+  /* The program is letting us know that it dynamically loaded something
+     (e.g. it called load(2) on AIX).  */
+  TARGET_WAITKIND_LOADED,
+
+  /* The program has forked.  A "related" process' ID is in value.related_pid.
+     I.e., if the child forks, value.related_pid is the parent's ID.
+     */
+  TARGET_WAITKIND_FORKED,
+
+  /* The program has vforked.  A "related" process's ID is in value.related_pid.
+     */
+  TARGET_WAITKIND_VFORKED,
+
+  /* The program has exec'ed a new executable file.  The new file's pathname
+     is pointed to by value.execd_pathname.
+     */
+  TARGET_WAITKIND_EXECD,
+
+  /* The program has entered or returned from a system call.  On HP-UX, this
+     is used in the hardware watchpoint implementation.  The syscall's unique
+     integer ID number is in value.syscall_id;
+     */
+  TARGET_WAITKIND_SYSCALL_ENTRY,
+  TARGET_WAITKIND_SYSCALL_RETURN,
+
+  /* Nothing happened, but we stopped anyway.  This perhaps should be handled
+     within target_wait, but I'm not sure target_wait should be resuming the
+     inferior.  */
+  TARGET_WAITKIND_SPURIOUS
+  };
+
+/* The numbering of these signals is chosen to match traditional unix
+   signals (insofar as various unices use the same numbers, anyway).
+   It is also the numbering of the GDB remote protocol.  Other remote
+   protocols, if they use a different numbering, should make sure to
+   translate appropriately.  */
+
+/* This is based strongly on Unix/POSIX signals for several reasons:
+   (1) This set of signals represents a widely-accepted attempt to
+   represent events of this sort in a portable fashion, (2) we want a
+   signal to make it from wait to child_wait to the user intact, (3) many
+   remote protocols use a similar encoding.  However, it is
+   recognized that this set of signals has limitations (such as not
+   distinguishing between various kinds of SIGSEGV, or not
+   distinguishing hitting a breakpoint from finishing a single step).
+   So in the future we may get around this either by adding additional
+   signals for breakpoint, single-step, etc., or by adding signal
+   codes; the latter seems more in the spirit of what BSD, System V,
+   etc. are doing to address these issues.  */
+
+/* For an explanation of what each signal means, see
+   target_signal_to_string.  */
+
+enum target_signal {
+  /* Used some places (e.g. stop_signal) to record the concept that
+     there is no signal.  */
+  TARGET_SIGNAL_0 = 0,
+  TARGET_SIGNAL_FIRST = 0,
+  TARGET_SIGNAL_HUP = 1,
+  TARGET_SIGNAL_INT = 2,
+  TARGET_SIGNAL_QUIT = 3,
+  TARGET_SIGNAL_ILL = 4,
+  TARGET_SIGNAL_TRAP = 5,
+  TARGET_SIGNAL_ABRT = 6,
+  TARGET_SIGNAL_EMT = 7,
+  TARGET_SIGNAL_FPE = 8,
+  TARGET_SIGNAL_KILL = 9,
+  TARGET_SIGNAL_BUS = 10,
+  TARGET_SIGNAL_SEGV = 11,
+  TARGET_SIGNAL_SYS = 12,
+  TARGET_SIGNAL_PIPE = 13,
+  TARGET_SIGNAL_ALRM = 14,
+  TARGET_SIGNAL_TERM = 15,
+  TARGET_SIGNAL_URG = 16,
+  TARGET_SIGNAL_STOP = 17,
+  TARGET_SIGNAL_TSTP = 18,
+  TARGET_SIGNAL_CONT = 19,
+  TARGET_SIGNAL_CHLD = 20,
+  TARGET_SIGNAL_TTIN = 21,
+  TARGET_SIGNAL_TTOU = 22,
+  TARGET_SIGNAL_IO = 23,
+  TARGET_SIGNAL_XCPU = 24,
+  TARGET_SIGNAL_XFSZ = 25,
+  TARGET_SIGNAL_VTALRM = 26,
+  TARGET_SIGNAL_PROF = 27,
+  TARGET_SIGNAL_WINCH = 28,
+  TARGET_SIGNAL_LOST = 29,
+  TARGET_SIGNAL_USR1 = 30,
+  TARGET_SIGNAL_USR2 = 31,
+  TARGET_SIGNAL_PWR = 32,
+  /* Similar to SIGIO.  Perhaps they should have the same number.  */
+  TARGET_SIGNAL_POLL = 33,
+  TARGET_SIGNAL_WIND = 34,
+  TARGET_SIGNAL_PHONE = 35,
+  TARGET_SIGNAL_WAITING = 36,
+  TARGET_SIGNAL_LWP = 37,
+  TARGET_SIGNAL_DANGER = 38,
+  TARGET_SIGNAL_GRANT = 39,
+  TARGET_SIGNAL_RETRACT = 40,
+  TARGET_SIGNAL_MSG = 41,
+  TARGET_SIGNAL_SOUND = 42,
+  TARGET_SIGNAL_SAK = 43,
+  TARGET_SIGNAL_PRIO = 44,
+  TARGET_SIGNAL_REALTIME_33 = 45,
+  TARGET_SIGNAL_REALTIME_34 = 46,
+  TARGET_SIGNAL_REALTIME_35 = 47,
+  TARGET_SIGNAL_REALTIME_36 = 48,
+  TARGET_SIGNAL_REALTIME_37 = 49,
+  TARGET_SIGNAL_REALTIME_38 = 50,
+  TARGET_SIGNAL_REALTIME_39 = 51,
+  TARGET_SIGNAL_REALTIME_40 = 52,
+  TARGET_SIGNAL_REALTIME_41 = 53,
+  TARGET_SIGNAL_REALTIME_42 = 54,
+  TARGET_SIGNAL_REALTIME_43 = 55,
+  TARGET_SIGNAL_REALTIME_44 = 56,
+  TARGET_SIGNAL_REALTIME_45 = 57,
+  TARGET_SIGNAL_REALTIME_46 = 58,
+  TARGET_SIGNAL_REALTIME_47 = 59,
+  TARGET_SIGNAL_REALTIME_48 = 60,
+  TARGET_SIGNAL_REALTIME_49 = 61,
+  TARGET_SIGNAL_REALTIME_50 = 62,
+  TARGET_SIGNAL_REALTIME_51 = 63,
+  TARGET_SIGNAL_REALTIME_52 = 64,
+  TARGET_SIGNAL_REALTIME_53 = 65,
+  TARGET_SIGNAL_REALTIME_54 = 66,
+  TARGET_SIGNAL_REALTIME_55 = 67,
+  TARGET_SIGNAL_REALTIME_56 = 68,
+  TARGET_SIGNAL_REALTIME_57 = 69,
+  TARGET_SIGNAL_REALTIME_58 = 70,
+  TARGET_SIGNAL_REALTIME_59 = 71,
+  TARGET_SIGNAL_REALTIME_60 = 72,
+  TARGET_SIGNAL_REALTIME_61 = 73,
+  TARGET_SIGNAL_REALTIME_62 = 74,
+  TARGET_SIGNAL_REALTIME_63 = 75,
+#if defined(MACH) || defined(__MACH__)
+  /* Mach exceptions */
+  TARGET_EXC_BAD_ACCESS = 76,
+  TARGET_EXC_BAD_INSTRUCTION = 77,
+  TARGET_EXC_ARITHMETIC = 78,
+  TARGET_EXC_EMULATION = 79,
+  TARGET_EXC_SOFTWARE = 80,
+  TARGET_EXC_BREAKPOINT = 81,
+#endif
+  /* Some signal we don't know about.  */
+  TARGET_SIGNAL_UNKNOWN,
+
+  /* Use whatever signal we use when one is not specifically specified
+     (for passing to proceed and so on).  */
+  TARGET_SIGNAL_DEFAULT,
+
+  /* Last and unused enum value, for sizing arrays, etc.  */
+  TARGET_SIGNAL_LAST
+};
+
+struct target_waitstatus {
+  enum target_waitkind kind;
+
+  /* Forked child pid, execd pathname, exit status or signal number.  */
+  union {
+    int integer;
+    enum target_signal sig;
+    int  related_pid;
+    char *  execd_pathname;
+    int  syscall_id;
+  } value;
+};
+
+/* Return the string for a signal.  */
+extern char *target_signal_to_string PARAMS ((enum target_signal));
+
+/* Return the name (SIGHUP, etc.) for a signal.  */
+extern char *target_signal_to_name PARAMS ((enum target_signal));
+
+/* Given a name (SIGHUP, etc.), return its signal.  */
+enum target_signal target_signal_from_name PARAMS ((char *));
+
+
+/* If certain kinds of activity happen, target_wait should perform
+   callbacks.  */
+/* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible
+   on TARGET_ACTIVITY_FD.   */
+extern int target_activity_fd;
+/* Returns zero to leave the inferior alone, one to interrupt it.  */
+extern int (*target_activity_function) PARAMS ((void));
+
+struct target_ops
+{
+  char	       *to_shortname;	/* Name this target type */
+  char	       *to_longname;	/* Name for printing */
+  char 	       *to_doc;	        /* Documentation.  Does not include trailing
+				   newline, and starts with a one-line descrip-
+				   tion (probably similar to to_longname). */
+  void 	      (*to_open) PARAMS ((char *, int));
+  void 	      (*to_close) PARAMS ((int));
+  void 	      (*to_attach) PARAMS ((char *, int));
+  void        (*to_post_attach) PARAMS ((int));
+  void 	      (*to_require_attach) PARAMS ((char *, int));
+  void 	      (*to_detach) PARAMS ((char *, int));
+  void 	      (*to_require_detach) PARAMS ((int, char *, int));
+  void 	      (*to_resume) PARAMS ((int, int, enum target_signal));
+  int  	      (*to_wait) PARAMS ((int, struct target_waitstatus *));
+  void        (*to_post_wait) PARAMS ((int, int));
+  void 	      (*to_fetch_registers) PARAMS ((int));
+  void 	      (*to_store_registers) PARAMS ((int));
+  void 	      (*to_prepare_to_store) PARAMS ((void));
+
+  /* Transfer LEN bytes of memory between GDB address MYADDR and
+     target address MEMADDR.  If WRITE, transfer them to the target, else
+     transfer them from the target.  TARGET is the target from which we
+     get this function.
+
+     Return value, N, is one of the following:
+
+     0 means that we can't handle this.  If errno has been set, it is the
+     error which prevented us from doing it (FIXME: What about bfd_error?).
+
+     positive (call it N) means that we have transferred N bytes
+     starting at MEMADDR.  We might be able to handle more bytes
+     beyond this length, but no promises.
+
+     negative (call its absolute value N) means that we cannot
+     transfer right at MEMADDR, but we could transfer at least
+     something at MEMADDR + N.  */
+
+  int  	      (*to_xfer_memory) PARAMS ((CORE_ADDR memaddr, char *myaddr,
+					 int len, int write,
+					 struct target_ops * target));
+
+#if 0
+  /* Enable this after 4.12.  */
+
+  /* Search target memory.  Start at STARTADDR and take LEN bytes of
+     target memory, and them with MASK, and compare to DATA.  If they
+     match, set *ADDR_FOUND to the address we found it at, store the data
+     we found at LEN bytes starting at DATA_FOUND, and return.  If
+     not, add INCREMENT to the search address and keep trying until
+     the search address is outside of the range [LORANGE,HIRANGE).
+
+     If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and return.  */
+  void (*to_search) PARAMS ((int len, char *data, char *mask,
+			     CORE_ADDR startaddr, int increment,
+			     CORE_ADDR lorange, CORE_ADDR hirange,
+			     CORE_ADDR *addr_found, char *data_found));
+
+#define	target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found)	\
+  (*current_target.to_search) (len, data, mask, startaddr, increment, \
+				lorange, hirange, addr_found, data_found)
+#endif /* 0 */
+
+  void 	      (*to_files_info) PARAMS ((struct target_ops *));
+  int  	      (*to_insert_breakpoint) PARAMS ((CORE_ADDR, char *));
+  int 	      (*to_remove_breakpoint) PARAMS ((CORE_ADDR, char *));
+  void 	      (*to_terminal_init) PARAMS ((void));
+  void 	      (*to_terminal_inferior) PARAMS ((void));
+  void 	      (*to_terminal_ours_for_output) PARAMS ((void));
+  void 	      (*to_terminal_ours) PARAMS ((void));
+  void 	      (*to_terminal_info) PARAMS ((char *, int));
+  void 	      (*to_kill) PARAMS ((void));
+  void 	      (*to_load) PARAMS ((char *, int));
+  int 	      (*to_lookup_symbol) PARAMS ((char *, CORE_ADDR *));
+  void 	      (*to_create_inferior) PARAMS ((char *, char *, char **));
+  void        (*to_post_startup_inferior) PARAMS ((int));
+  void        (*to_acknowledge_created_inferior) PARAMS ((int));
+  void        (*to_clone_and_follow_inferior) PARAMS ((int, int *));
+  void        (*to_post_follow_inferior_by_clone) PARAMS ((void));
+  int         (*to_insert_fork_catchpoint) PARAMS ((int));
+  int         (*to_remove_fork_catchpoint) PARAMS ((int));
+  int         (*to_insert_vfork_catchpoint) PARAMS ((int));
+  int         (*to_remove_vfork_catchpoint) PARAMS ((int));
+  int         (*to_has_forked) PARAMS ((int, int *));
+  int         (*to_has_vforked) PARAMS ((int, int *));
+  int         (*to_can_follow_vfork_prior_to_exec) PARAMS ((void));
+  void        (*to_post_follow_vfork) PARAMS ((int, int, int, int));
+  int         (*to_insert_exec_catchpoint) PARAMS ((int));
+  int         (*to_remove_exec_catchpoint) PARAMS ((int));
+  int         (*to_has_execd) PARAMS ((int, char **));
+  int         (*to_reported_exec_events_per_exec_call) PARAMS ((void));
+  int         (*to_has_syscall_event) PARAMS ((int, enum target_waitkind *, int *));
+  int         (*to_has_exited) PARAMS ((int, int, int *));
+  void 	      (*to_mourn_inferior) PARAMS ((void));
+  int	      (*to_can_run) PARAMS ((void));
+  void	      (*to_notice_signals) PARAMS ((int pid));
+  int	      (*to_thread_alive) PARAMS ((int pid));
+  void	      (*to_stop) PARAMS ((void));
+  int 	      (*to_query) PARAMS ((int/*char*/, char *, char *, int *));
+  struct symtab_and_line * (*to_enable_exception_callback) PARAMS ((enum exception_event_kind, int));
+  struct exception_event_record * (*to_get_current_exception_event) PARAMS ((void));
+  char *      (*to_pid_to_exec_file) PARAMS ((int pid));
+  char *      (*to_core_file_to_sym_file) PARAMS ((char *));
+  enum strata   to_stratum;
+  struct target_ops
+		*DONT_USE;	/* formerly to_next */
+  int		to_has_all_memory;
+  int		to_has_memory;
+  int		to_has_stack;
+  int		to_has_registers;
+  int		to_has_execution;
+  int		to_has_thread_control;	/* control thread execution */
+  struct section_table
+    	       *to_sections;
+  struct section_table
+	       *to_sections_end;
+  int		to_magic;
+  /* Need sub-structure for target machine related rather than comm related? */
+};
+
+/* Magic number for checking ops size.  If a struct doesn't end with this
+   number, somebody changed the declaration but didn't change all the
+   places that initialize one.  */
+
+#define	OPS_MAGIC	3840
+
+/* The ops structure for our "current" target process.  This should
+   never be NULL.  If there is no target, it points to the dummy_target.  */
+
+extern struct target_ops	current_target;
+
+/* An item on the target stack.  */
+
+struct target_stack_item
+{
+  struct target_stack_item *next;
+  struct target_ops *target_ops;
+};
+
+/* The target stack.  */
+
+extern struct target_stack_item *target_stack;
+
+/* Define easy words for doing these operations on our current target.  */
+
+#define	target_shortname	(current_target.to_shortname)
+#define	target_longname		(current_target.to_longname)
+
+/* The open routine takes the rest of the parameters from the command,
+   and (if successful) pushes a new target onto the stack.
+   Targets should supply this routine, if only to provide an error message.  */
+#define	target_open(name, from_tty)	\
+	(*current_target.to_open) (name, from_tty)
+
+/* Does whatever cleanup is required for a target that we are no longer
+   going to be calling.  Argument says whether we are quitting gdb and
+   should not get hung in case of errors, or whether we want a clean
+   termination even if it takes a while.  This routine is automatically
+   always called just before a routine is popped off the target stack.
+   Closing file descriptors and freeing memory are typical things it should
+   do.  */
+
+#define	target_close(quitting)	\
+	(*current_target.to_close) (quitting)
+
+/* Attaches to a process on the target side.  Arguments are as passed
+   to the `attach' command by the user.  This routine can be called
+   when the target is not on the target-stack, if the target_can_run
+   routine returns 1; in that case, it must push itself onto the stack.  
+   Upon exit, the target should be ready for normal operations, and
+   should be ready to deliver the status of the process immediately 
+   (without waiting) to an upcoming target_wait call.  */
+
+#define	target_attach(args, from_tty)	\
+	(*current_target.to_attach) (args, from_tty)
+
+/* The target_attach operation places a process under debugger control,
+   and stops the process.
+
+   This operation provides a target-specific hook that allows the
+   necessary bookkeeping to be performed after an attach completes.
+   */
+#define target_post_attach(pid) \
+        (*current_target.to_post_attach) (pid)
+
+/* Attaches to a process on the target side, if not already attached.
+   (If already attached, takes no action.)
+
+   This operation can be used to follow the child process of a fork.
+   On some targets, such child processes of an original inferior process
+   are automatically under debugger control, and thus do not require an
+   actual attach operation.  */
+
+#define	target_require_attach(args, from_tty)	\
+	(*current_target.to_require_attach) (args, from_tty)
+
+/* Takes a program previously attached to and detaches it.
+   The program may resume execution (some targets do, some don't) and will
+   no longer stop on signals, etc.  We better not have left any breakpoints
+   in the program or it'll die when it hits one.  ARGS is arguments
+   typed by the user (e.g. a signal to send the process).  FROM_TTY
+   says whether to be verbose or not.  */
+
+extern void
+target_detach PARAMS ((char *, int));
+
+/* Detaches from a process on the target side, if not already dettached.
+   (If already detached, takes no action.)
+
+   This operation can be used to follow the parent process of a fork.
+   On some targets, such child processes of an original inferior process
+   are automatically under debugger control, and thus do require an actual
+   detach operation.
+
+   PID is the process id of the child to detach from.
+   ARGS is arguments typed by the user (e.g. a signal to send the process).
+   FROM_TTY says whether to be verbose or not.  */
+
+#define target_require_detach(pid, args, from_tty) \
+	(*current_target.to_require_detach) (pid, args, from_tty)
+
+/* Resume execution of the target process PID.  STEP says whether to
+   single-step or to run free; SIGGNAL is the signal to be given to
+   the target, or TARGET_SIGNAL_0 for no signal.  The caller may not
+   pass TARGET_SIGNAL_DEFAULT.  */
+
+#define	target_resume(pid, step, siggnal)	\
+	(*current_target.to_resume) (pid, step, siggnal)
+
+/* Wait for process pid to do something.  Pid = -1 to wait for any pid
+   to do something.  Return pid of child, or -1 in case of error;
+   store status through argument pointer STATUS.  Note that it is
+   *not* OK to return_to_top_level out of target_wait without popping
+   the debugging target from the stack; GDB isn't prepared to get back
+   to the prompt with a debugging target but without the frame cache,
+   stop_pc, etc., set up.  */
+
+#define	target_wait(pid, status)		\
+	(*current_target.to_wait) (pid, status)
+
+/* The target_wait operation waits for a process event to occur, and
+   thereby stop the process.
+
+   On some targets, certain events may happen in sequences.  gdb's
+   correct response to any single event of such a sequence may require
+   knowledge of what earlier events in the sequence have been seen.
+
+   This operation provides a target-specific hook that allows the
+   necessary bookkeeping to be performed to track such sequences.
+   */
+
+#define target_post_wait(pid, status) \
+        (*current_target.to_post_wait) (pid, status)
+
+/* Fetch register REGNO, or all regs if regno == -1.  No result.  */
+
+#define	target_fetch_registers(regno)	\
+	(*current_target.to_fetch_registers) (regno)
+
+/* Store at least register REGNO, or all regs if REGNO == -1.
+   It can store as many registers as it wants to, so target_prepare_to_store
+   must have been previously called.  Calls error() if there are problems.  */
+
+#define	target_store_registers(regs)	\
+	(*current_target.to_store_registers) (regs)
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that REGISTERS contains all the registers from the program being
+   debugged.  */
+
+#define	target_prepare_to_store()	\
+	(*current_target.to_prepare_to_store) ()
+
+extern int target_read_string PARAMS ((CORE_ADDR, char **, int, int *));
+
+extern int
+target_read_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+
+extern int
+target_read_memory_section PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
+				    asection *bfd_section));
+
+extern int
+target_read_memory_partial PARAMS ((CORE_ADDR, char *, int, int *));
+
+extern int
+target_write_memory PARAMS ((CORE_ADDR, char *, int));
+
+extern int
+xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+extern int
+child_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+extern char *
+child_pid_to_exec_file PARAMS ((int));
+
+extern char *
+child_core_file_to_sym_file PARAMS ((char *));
+
+#if defined(CHILD_POST_ATTACH)
+extern void
+child_post_attach PARAMS ((int));
+#endif
+
+extern void
+child_post_wait PARAMS ((int, int));
+
+extern void
+child_post_startup_inferior PARAMS ((int));
+
+extern void
+child_acknowledge_created_inferior PARAMS ((int));
+
+extern void
+child_clone_and_follow_inferior PARAMS ((int, int *));
+
+extern void
+child_post_follow_inferior_by_clone PARAMS ((void));
+
+extern int
+child_insert_fork_catchpoint PARAMS ((int));
+
+extern int
+child_remove_fork_catchpoint PARAMS ((int));
+
+extern int
+child_insert_vfork_catchpoint PARAMS ((int));
+
+extern int
+child_remove_vfork_catchpoint PARAMS ((int));
+
+extern int
+child_has_forked PARAMS ((int, int *));
+
+extern int
+child_has_vforked PARAMS ((int, int *));
+
+extern void
+child_acknowledge_created_inferior PARAMS ((int));
+
+extern int
+child_can_follow_vfork_prior_to_exec PARAMS ((void));
+
+extern void
+child_post_follow_vfork PARAMS ((int, int, int, int));
+
+extern int
+child_insert_exec_catchpoint PARAMS ((int));
+
+extern int
+child_remove_exec_catchpoint PARAMS ((int));
+
+extern int
+child_has_execd PARAMS ((int, char **));
+
+extern int
+child_reported_exec_events_per_exec_call PARAMS ((void));
+
+extern int
+child_has_syscall_event PARAMS ((int, enum target_waitkind *, int *));
+
+extern int
+child_has_exited PARAMS ((int, int, int *));
+
+extern int
+child_thread_alive PARAMS ((int));
+
+/* From exec.c */
+
+extern void
+print_section_info PARAMS ((struct target_ops *, bfd *));
+
+/* Print a line about the current target.  */
+
+#define	target_files_info()	\
+	(*current_target.to_files_info) (&current_target)
+
+/* Insert a breakpoint at address ADDR in the target machine.
+   SAVE is a pointer to memory allocated for saving the
+   target contents.  It is guaranteed by the caller to be long enough
+   to save "sizeof BREAKPOINT" bytes.  Result is 0 for success, or
+   an errno value.  */
+
+#define	target_insert_breakpoint(addr, save)	\
+	(*current_target.to_insert_breakpoint) (addr, save)
+
+/* Remove a breakpoint at address ADDR in the target machine.
+   SAVE is a pointer to the same save area 
+   that was previously passed to target_insert_breakpoint.  
+   Result is 0 for success, or an errno value.  */
+
+#define	target_remove_breakpoint(addr, save)	\
+	(*current_target.to_remove_breakpoint) (addr, save)
+
+/* Initialize the terminal settings we record for the inferior,
+   before we actually run the inferior.  */
+
+#define target_terminal_init() \
+	(*current_target.to_terminal_init) ()
+
+/* Put the inferior's terminal settings into effect.
+   This is preparation for starting or resuming the inferior.  */
+
+#define target_terminal_inferior() \
+	(*current_target.to_terminal_inferior) ()
+
+/* Put some of our terminal settings into effect,
+   enough to get proper results from our output,
+   but do not change into or out of RAW mode
+   so that no input is discarded.
+
+   After doing this, either terminal_ours or terminal_inferior
+   should be called to get back to a normal state of affairs.  */
+
+#define target_terminal_ours_for_output() \
+	(*current_target.to_terminal_ours_for_output) ()
+
+/* Put our terminal settings into effect.
+   First record the inferior's terminal settings
+   so they can be restored properly later.  */
+
+#define target_terminal_ours() \
+	(*current_target.to_terminal_ours) ()
+
+/* Print useful information about our terminal status, if such a thing
+   exists.  */
+
+#define target_terminal_info(arg, from_tty) \
+	(*current_target.to_terminal_info) (arg, from_tty)
+
+/* Kill the inferior process.   Make it go away.  */
+
+#define target_kill() \
+	(*current_target.to_kill) ()
+
+/* Load an executable file into the target process.  This is expected to
+   not only bring new code into the target process, but also to update
+   GDB's symbol tables to match.  */
+
+#define target_load(arg, from_tty) \
+	(*current_target.to_load) (arg, from_tty)
+
+/* Look up a symbol in the target's symbol table.  NAME is the symbol
+   name.  ADDRP is a CORE_ADDR * pointing to where the value of the symbol
+   should be returned.  The result is 0 if successful, nonzero if the
+   symbol does not exist in the target environment.  This function should
+   not call error() if communication with the target is interrupted, since
+   it is called from symbol reading, but should return nonzero, possibly
+   doing a complain().  */
+
+#define target_lookup_symbol(name, addrp) 	\
+  (*current_target.to_lookup_symbol) (name, addrp)
+
+/* Start an inferior process and set inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().
+   On VxWorks and various standalone systems, we ignore exec_file.  */
+ 
+#define	target_create_inferior(exec_file, args, env)	\
+	(*current_target.to_create_inferior) (exec_file, args, env)
+
+
+/* Some targets (such as ttrace-based HPUX) don't allow us to request
+   notification of inferior events such as fork and vork immediately
+   after the inferior is created.  (This because of how gdb gets an
+   inferior created via invoking a shell to do it.  In such a scenario,
+   if the shell init file has commands in it, the shell will fork and
+   exec for each of those commands, and we will see each such fork
+   event.  Very bad.)
+   
+   Such targets will supply an appropriate definition for this function.
+   */
+#define target_post_startup_inferior(pid) \
+        (*current_target.to_post_startup_inferior) (pid)
+
+/* On some targets, the sequence of starting up an inferior requires
+   some synchronization between gdb and the new inferior process, PID.
+   */
+#define target_acknowledge_created_inferior(pid) \
+        (*current_target.to_acknowledge_created_inferior) (pid)
+
+/* An inferior process has been created via a fork() or similar
+   system call.  This function will clone the debugger, then ensure
+   that CHILD_PID is attached to by that debugger.
+
+   FOLLOWED_CHILD is set TRUE on return *for the clone debugger only*,
+   and FALSE otherwise.  (The original and clone debuggers can use this
+   to determine which they are, if need be.)
+
+   (This is not a terribly useful feature without a GUI to prevent
+   the two debuggers from competing for shell input.)
+   */
+#define target_clone_and_follow_inferior(child_pid,followed_child) \
+        (*current_target.to_clone_and_follow_inferior) (child_pid, followed_child)
+
+/* This operation is intended to be used as the last in a sequence of
+   steps taken when following both parent and child of a fork.  This
+   is used by a clone of the debugger, which will follow the child.
+
+   The original debugger has detached from this process, and the
+   clone has attached to it.
+
+   On some targets, this requires a bit of cleanup to make it work
+   correctly.
+   */
+#define target_post_follow_inferior_by_clone() \
+        (*current_target.to_post_follow_inferior_by_clone) ()
+
+/* On some targets, we can catch an inferior fork or vfork event when it
+   occurs.  These functions insert/remove an already-created catchpoint for
+   such events.
+   */
+#define target_insert_fork_catchpoint(pid) \
+        (*current_target.to_insert_fork_catchpoint) (pid)
+
+#define target_remove_fork_catchpoint(pid) \
+        (*current_target.to_remove_fork_catchpoint) (pid)
+
+#define target_insert_vfork_catchpoint(pid) \
+        (*current_target.to_insert_vfork_catchpoint) (pid)
+
+#define target_remove_vfork_catchpoint(pid) \
+        (*current_target.to_remove_vfork_catchpoint) (pid)
+
+/* Returns TRUE if PID has invoked the fork() system call.  And,
+   also sets CHILD_PID to the process id of the other ("child")
+   inferior process that was created by that call.
+   */
+#define target_has_forked(pid,child_pid) \
+        (*current_target.to_has_forked) (pid,child_pid)
+
+/* Returns TRUE if PID has invoked the vfork() system call.  And,
+   also sets CHILD_PID to the process id of the other ("child")
+   inferior process that was created by that call.
+   */
+#define target_has_vforked(pid,child_pid) \
+        (*current_target.to_has_vforked) (pid,child_pid)
+
+/* Some platforms (such as pre-10.20 HP-UX) don't allow us to do
+   anything to a vforked child before it subsequently calls exec().
+   On such platforms, we say that the debugger cannot "follow" the
+   child until it has vforked.
+
+   This function should be defined to return 1 by those targets
+   which can allow the debugger to immediately follow a vforked
+   child, and 0 if they cannot.
+   */
+#define target_can_follow_vfork_prior_to_exec() \
+        (*current_target.to_can_follow_vfork_prior_to_exec) ()
+
+/* An inferior process has been created via a vfork() system call.
+   The debugger has followed the parent, the child, or both.  The
+   process of setting up for that follow may have required some
+   target-specific trickery to track the sequence of reported events.
+   If so, this function should be defined by those targets that
+   require the debugger to perform cleanup or initialization after
+   the vfork follow.
+   */
+#define target_post_follow_vfork(parent_pid,followed_parent,child_pid,followed_child) \
+        (*current_target.to_post_follow_vfork) (parent_pid,followed_parent,child_pid,followed_child)
+
+/* On some targets, we can catch an inferior exec event when it
+   occurs.  These functions insert/remove an already-created catchpoint
+   for such events.
+   */
+#define target_insert_exec_catchpoint(pid) \
+        (*current_target.to_insert_exec_catchpoint) (pid)
+ 
+#define target_remove_exec_catchpoint(pid) \
+        (*current_target.to_remove_exec_catchpoint) (pid)
+
+/* Returns TRUE if PID has invoked a flavor of the exec() system call.
+   And, also sets EXECD_PATHNAME to the pathname of the executable file
+   that was passed to exec(), and is now being executed.
+   */
+#define target_has_execd(pid,execd_pathname) \
+        (*current_target.to_has_execd) (pid,execd_pathname)
+
+/* Returns the number of exec events that are reported when a process
+   invokes a flavor of the exec() system call on this target, if exec
+   events are being reported.
+   */
+#define target_reported_exec_events_per_exec_call() \
+        (*current_target.to_reported_exec_events_per_exec_call) ()
+
+/* Returns TRUE if PID has reported a syscall event.  And, also sets
+   KIND to the appropriate TARGET_WAITKIND_, and sets SYSCALL_ID to
+   the unique integer ID of the syscall.
+   */
+#define target_has_syscall_event(pid,kind,syscall_id) \
+  (*current_target.to_has_syscall_event) (pid,kind,syscall_id)
+
+/* Returns TRUE if PID has exited.  And, also sets EXIT_STATUS to the
+   exit code of PID, if any.
+   */
+#define target_has_exited(pid,wait_status,exit_status) \
+        (*current_target.to_has_exited) (pid,wait_status,exit_status)
+
+/* The debugger has completed a blocking wait() call.  There is now
+   some process event that must be processed.  This function should
+   be defined by those targets that require the debugger to perform
+   cleanup or internal state changes in response to the process event.
+   */
+
+/* The inferior process has died.  Do what is right.  */
+
+#define	target_mourn_inferior()	\
+	(*current_target.to_mourn_inferior) ()
+
+/* Does target have enough data to do a run or attach command? */
+
+#define target_can_run(t) \
+  	((t)->to_can_run) ()
+
+/* post process changes to signal handling in the inferior.  */
+
+#define target_notice_signals(pid) \
+  	(*current_target.to_notice_signals) (pid)
+
+/* Check to see if a thread is still alive.  */
+
+#define target_thread_alive(pid) \
+	(*current_target.to_thread_alive) (pid)
+
+/* Make target stop in a continuable fashion.  (For instance, under Unix, this
+   should act like SIGSTOP).  This function is normally used by GUIs to
+   implement a stop button.  */
+
+#define target_stop current_target.to_stop
+
+/* Queries the target side for some information.  The first argument is a
+   letter specifying the type of the query, which is used to determine who
+   should process it.  The second argument is a string that specifies which 
+   information is desired and the third is a buffer that carries back the 
+   response from the target side. The fourth parameter is the size of the
+   output buffer supplied. */
+ 
+#define	target_query(query_type, query, resp_buffer, bufffer_size)	\
+	(*current_target.to_query) (query_type, query, resp_buffer, bufffer_size)
+
+/* Get the symbol information for a breakpointable routine called when
+   an exception event occurs. 
+   Intended mainly for C++, and for those
+   platforms/implementations where such a callback mechanism is available,
+   e.g. HP-UX with ANSI C++ (aCC).  Some compilers (e.g. g++) support
+   different mechanisms for debugging exceptions. */
+
+#define target_enable_exception_callback(kind, enable) \
+        (*current_target.to_enable_exception_callback) (kind, enable)
+
+/* Get the current exception event kind -- throw or catch, etc. */
+   
+#define target_get_current_exception_event() \
+        (*current_target.to_get_current_exception_event) ()
+
+/* Pointer to next target in the chain, e.g. a core file and an exec file.  */
+
+#define	target_next \
+	(current_target.to_next)
+
+/* Does the target include all of memory, or only part of it?  This
+   determines whether we look up the target chain for other parts of
+   memory if this target can't satisfy a request.  */
+
+#define	target_has_all_memory	\
+	(current_target.to_has_all_memory)
+
+/* Does the target include memory?  (Dummy targets don't.)  */
+
+#define	target_has_memory	\
+	(current_target.to_has_memory)
+
+/* Does the target have a stack?  (Exec files don't, VxWorks doesn't, until
+   we start a process.)  */
+   
+#define	target_has_stack	\
+	(current_target.to_has_stack)
+
+/* Does the target have registers?  (Exec files don't.)  */
+
+#define	target_has_registers	\
+	(current_target.to_has_registers)
+
+/* Does the target have execution?  Can we make it jump (through
+   hoops), or pop its stack a few times?  FIXME: If this is to work that
+   way, it needs to check whether an inferior actually exists.
+   remote-udi.c and probably other targets can be the current target
+   when the inferior doesn't actually exist at the moment.  Right now
+   this just tells us whether this target is *capable* of execution.  */
+
+#define	target_has_execution	\
+	(current_target.to_has_execution)
+
+/* Can the target support the debugger control of thread execution?
+   a) Can it lock the thread scheduler?
+   b) Can it switch the currently running thread?  */
+
+#define target_can_lock_scheduler \
+ 	(current_target.to_has_thread_control & tc_schedlock)
+
+#define target_can_switch_threads \
+ 	(current_target.to_has_thread_control & tc_switch)
+
+extern void target_link PARAMS ((char *, CORE_ADDR *));
+
+/* Converts a process id to a string.  Usually, the string just contains
+   `process xyz', but on some systems it may contain
+   `process xyz thread abc'.  */
+
+#ifndef target_pid_to_str
+#define target_pid_to_str(PID) \
+	normal_pid_to_str (PID)
+extern char *normal_pid_to_str PARAMS ((int pid));
+#endif
+
+#ifndef target_tid_to_str
+#define target_tid_to_str(PID) \
+        normal_pid_to_str (PID)
+extern char *normal_pid_to_str PARAMS ((int pid));
+#endif
+ 
+
+#ifndef target_new_objfile
+#define target_new_objfile(OBJFILE)
+#endif
+
+#ifndef target_pid_or_tid_to_str
+#define target_pid_or_tid_to_str(ID) \
+	normal_pid_to_str (ID)
+#endif
+
+/* Attempts to find the pathname of the executable file
+   that was run to create a specified process.
+
+   The process PID must be stopped when this operation is used.
+   
+   If the executable file cannot be determined, NULL is returned.
+
+   Else, a pointer to a character string containing the pathname
+   is returned.  This string should be copied into a buffer by
+   the client if the string will not be immediately used, or if
+   it must persist.
+   */
+
+#define target_pid_to_exec_file(pid) \
+	(current_target.to_pid_to_exec_file) (pid)
+
+/* Hook to call target-dependant code after reading in a new symbol table. */
+
+#ifndef TARGET_SYMFILE_POSTREAD
+#define TARGET_SYMFILE_POSTREAD(OBJFILE)
+#endif
+
+/* Hook to call target dependant code just after inferior target process has
+   started.  */
+
+#ifndef TARGET_CREATE_INFERIOR_HOOK
+#define TARGET_CREATE_INFERIOR_HOOK(PID)
+#endif
+
+/* Hardware watchpoint interfaces.  */
+
+/* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
+   write).  */
+
+#ifndef STOPPED_BY_WATCHPOINT
+#define STOPPED_BY_WATCHPOINT(w) 0
+#endif
+
+/* HP-UX supplies these operations, which respectively disable and enable
+   the memory page-protections that are used to implement hardware watchpoints
+   on that platform.  See wait_for_inferior's use of these.
+   */
+#if !defined(TARGET_DISABLE_HW_WATCHPOINTS)
+#define TARGET_DISABLE_HW_WATCHPOINTS(pid)
+#endif
+
+#if !defined(TARGET_ENABLE_HW_WATCHPOINTS)
+#define TARGET_ENABLE_HW_WATCHPOINTS(pid)
+#endif
+
+/* Provide defaults for systems that don't support hardware watchpoints. */
+
+#ifndef TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* Returns non-zero if we can set a hardware watchpoint of type TYPE.  TYPE is
+   one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
+   bp_hardware_breakpoint.  CNT is the number of such watchpoints used so far
+   (including this one?).  OTHERTYPE is who knows what...  */
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) 0
+
+#if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT)
+#define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \
+        (LONGEST)(byte_count) <= REGISTER_SIZE
+#endif
+
+/* However, some addresses may not be profitable to use hardware to watch,
+   or may be difficult to understand when the addressed object is out of
+   scope, and hence should be unwatched.  On some targets, this may have
+   severe performance penalties, such that we might as well use regular
+   watchpoints, and save (possibly precious) hardware watchpoints for other
+   locations.
+   */
+#if !defined(TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT)
+#define TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT(pid,start,len) 0
+#endif
+
+
+/* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.  TYPE is 0
+   for write, 1 for read, and 2 for read/write accesses.  Returns 0 for
+   success, non-zero for failure.  */
+
+#define target_remove_watchpoint(ADDR,LEN,TYPE) -1
+#define target_insert_watchpoint(ADDR,LEN,TYPE) -1
+
+#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
+
+#ifndef target_insert_hw_breakpoint
+#define target_remove_hw_breakpoint(ADDR,SHADOW) -1
+#define target_insert_hw_breakpoint(ADDR,SHADOW) -1
+#endif
+
+#ifndef target_stopped_data_address
+#define target_stopped_data_address() 0
+#endif
+
+/* If defined, then we need to decr pc by this much after a hardware break-
+   point.  Presumably this overrides DECR_PC_AFTER_BREAK...  */
+
+#ifndef DECR_PC_AFTER_HW_BREAK
+#define DECR_PC_AFTER_HW_BREAK 0
+#endif
+
+/* Sometimes gdb may pick up what appears to be a valid target address
+   from a minimal symbol, but the value really means, essentially,
+   "This is an index into a table which is populated when the inferior
+   is run.  Therefore, do not attempt to use this as a PC."
+   */
+#if !defined(PC_REQUIRES_RUN_BEFORE_USE)
+#define PC_REQUIRES_RUN_BEFORE_USE(pc) (0)
+#endif
+
+/* This will only be defined by a target that supports catching vfork events,
+   such as HP-UX.
+
+   On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked
+   child process after it has exec'd, causes the parent process to resume as
+   well.  To prevent the parent from running spontaneously, such targets should
+   define this to a function that prevents that from happening.
+   */
+#if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED)
+#define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0)
+#endif
+
+/* This will only be defined by a target that supports catching vfork events,
+   such as HP-UX.
+
+   On some targets (such as HP-UX 10.20 and earlier), a newly vforked child
+   process must be resumed when it delivers its exec event, before the parent
+   vfork event will be delivered to us.
+   */
+#if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK)
+#define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0)
+#endif
+
+/* Routines for maintenance of the target structures...
+
+   add_target:   Add a target to the list of all possible targets.
+
+   push_target:  Make this target the top of the stack of currently used
+		 targets, within its particular stratum of the stack.  Result
+		 is 0 if now atop the stack, nonzero if not on top (maybe
+		 should warn user).
+
+   unpush_target: Remove this from the stack of currently used targets,
+		 no matter where it is on the list.  Returns 0 if no
+		 change, 1 if removed from stack.
+
+   pop_target:	 Remove the top thing on the stack of current targets.  */
+
+extern void
+add_target PARAMS ((struct target_ops *));
+
+extern int
+push_target PARAMS ((struct target_ops *));
+
+extern int
+unpush_target PARAMS ((struct target_ops *));
+
+extern void
+target_preopen PARAMS ((int));
+
+extern void
+pop_target PARAMS ((void));
+
+/* Struct section_table maps address ranges to file sections.  It is
+   mostly used with BFD files, but can be used without (e.g. for handling
+   raw disks, or files not in formats handled by BFD).  */
+
+struct section_table {
+  CORE_ADDR addr;		/* Lowest address in section */
+  CORE_ADDR endaddr;		/* 1+highest address in section */
+
+  sec_ptr the_bfd_section;
+
+  bfd	   *bfd;		/* BFD file pointer */
+};
+
+/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
+   Returns 0 if OK, 1 on error.  */
+
+extern int
+build_section_table PARAMS ((bfd *, struct section_table **,
+			     struct section_table **));
+
+/* From mem-break.c */
+
+extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+extern int memory_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+extern breakpoint_from_pc_fn memory_breakpoint_from_pc;
+#ifndef BREAKPOINT_FROM_PC
+#define BREAKPOINT_FROM_PC(pcptr, lenptr) memory_breakpoint_from_pc (pcptr, lenptr)
+#endif
+
+
+/* From target.c */
+
+extern void
+initialize_targets PARAMS ((void));
+
+extern void
+noprocess PARAMS ((void));
+
+extern void
+find_default_attach PARAMS ((char *, int));
+
+void
+find_default_require_attach PARAMS ((char *, int));
+
+void
+find_default_require_detach PARAMS ((int, char *, int));
+
+extern void
+find_default_create_inferior PARAMS ((char *, char *, char **));
+
+void
+find_default_clone_and_follow_inferior PARAMS ((int, int *));
+
+extern struct target_ops *
+find_core_target PARAMS ((void));
+
+/* Stuff that should be shared among the various remote targets.  */
+
+/* Debugging level.  0 is off, and non-zero values mean to print some debug
+   information (higher values, more information).  */
+extern int remote_debug;
+
+/* Speed in bits per second, or -1 which means don't mess with the speed.  */
+extern int baud_rate;
+/* Timeout limit for response from target. */
+extern int remote_timeout;
+
+extern asection *target_memory_bfd_section;
+
+/* Functions for helping to write a native target.  */
+
+/* This is for native targets which use a unix/POSIX-style waitstatus.  */
+extern void store_waitstatus PARAMS ((struct target_waitstatus *, int));
+
+/* Convert between host signal numbers and enum target_signal's.  */
+extern enum target_signal target_signal_from_host PARAMS ((int));
+extern int target_signal_to_host PARAMS ((enum target_signal));
+
+/* Convert from a number used in a GDB command to an enum target_signal.  */
+extern enum target_signal target_signal_from_command PARAMS ((int));
+
+/* Any target can call this to switch to remote protocol (in remote.c). */
+extern void push_remote_target PARAMS ((char *name, int from_tty));
+
+/* Imported from machine dependent code */
+
+#ifndef SOFTWARE_SINGLE_STEP_P
+#define SOFTWARE_SINGLE_STEP_P 0
+#define SOFTWARE_SINGLE_STEP(sig,bp_p) abort ()
+#endif /* SOFTWARE_SINGLE_STEP_P */
+
+/* Blank target vector entries are initialized to target_ignore. */
+void target_ignore PARAMS ((void));
+
+/* Macro for getting target's idea of a frame pointer.
+   FIXME: GDB's whole scheme for dealing with "frames" and
+   "frame pointers" needs a serious shakedown.  */
+#ifndef TARGET_VIRTUAL_FRAME_POINTER
+#define TARGET_VIRTUAL_FRAME_POINTER(ADDR, REGP, OFFP) \
+   do { *(REGP) = FP_REGNUM; *(OFFP) =  0; } while (0)
+#endif /* TARGET_VIRTUAL_FRAME_POINTER */
+
+#endif	/* !defined (TARGET_H) */
diff --git a/gdb/terminal.h b/gdb/terminal.h
new file mode 100644
index 0000000..e7fb2cb
--- /dev/null
+++ b/gdb/terminal.h
@@ -0,0 +1,92 @@
+/* Terminal interface definitions for GDB, the GNU Debugger.
+   Copyright 1986, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (TERMINAL_H)
+#define TERMINAL_H 1
+
+
+/* If we're using autoconf, it will define HAVE_TERMIOS_H,
+   HAVE_TERMIO_H and HAVE_SGTTY_H for us. One day we can rewrite
+   ser-unix.c and inflow.c to inspect those names instead of
+   HAVE_TERMIOS, HAVE_TERMIO and the implicit HAVE_SGTTY (when neither
+   HAVE_TERMIOS or HAVE_TERMIO is set).  Until then, make sure that
+   nothing has already defined the one of the names, and do the right
+   thing. */
+
+/* nothing works with go32, and the headers aren't complete */
+#if !defined (__GO32__)
+#if !defined (HAVE_TERMIOS) && !defined(HAVE_TERMIO) && !defined(HAVE_SGTTY)
+#if defined(HAVE_TERMIOS_H)
+#define HAVE_TERMIOS
+#else /* ! defined (HAVE_TERMIOS_H) */
+#if defined(HAVE_TERMIO_H)
+#define HAVE_TERMIO
+#else /* ! defined (HAVE_TERMIO_H) */
+#if defined(HAVE_SGTTY_H)
+#define HAVE_SGTTY
+#endif /* ! defined (HAVE_SGTTY_H) */
+#endif /* ! defined (HAVE_TERMIO_H) */
+#endif /* ! defined (HAVE_TERMIOS_H) */
+#endif /* !defined (HAVE_TERMIOS) && !defined(HAVE_TERMIO) && !defined(HAVE_SGTTY) */
+#endif /* ! defined (__GO32__) */
+
+#if defined(HAVE_TERMIOS)
+#include <termios.h>
+#endif
+
+#if !defined(__GO32__) && !defined(_WIN32) && !defined (HAVE_TERMIOS)
+
+/* Define a common set of macros -- BSD based -- and redefine whatever
+   the system offers to make it look like that.  FIXME: serial.h and
+   ser-*.c deal with this in a much cleaner fashion; as soon as stuff
+   is converted to use them, can get rid of this crap.  */
+
+#ifdef HAVE_TERMIO
+
+#include <termio.h>
+
+#undef TIOCGETP
+#define TIOCGETP TCGETA
+#undef TIOCSETN
+#define TIOCSETN TCSETA
+#undef TIOCSETP
+#define TIOCSETP TCSETAF
+#define TERMINAL struct termio
+
+#else /* sgtty */
+
+#include <fcntl.h>
+#include <sgtty.h>
+#include <sys/ioctl.h>
+#define TERMINAL struct sgttyb
+
+#endif /* sgtty */
+#endif
+
+extern void new_tty PARAMS ((void));
+
+/* Do we have job control?  Can be assumed to always be the same within
+   a given run of GDB.  In inflow.c.  */
+extern int job_control;
+
+/* Set the process group of the caller to its own pid, or do nothing if
+   we lack job control.  */
+extern int gdb_setpgid PARAMS ((void));
+
+#endif	/* !defined (TERMINAL_H) */
diff --git a/gdb/testsuite/.gdbinit b/gdb/testsuite/.gdbinit
new file mode 100644
index 0000000..62bcb74
--- /dev/null
+++ b/gdb/testsuite/.gdbinit
@@ -0,0 +1 @@
+set height 400
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
new file mode 100644
index 0000000..77a96b0
--- /dev/null
+++ b/gdb/testsuite/ChangeLog
@@ -0,0 +1,5930 @@
+1999-03-23  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.c++/overload.cc: Pass string instead of char addr, always
+	init ccpfoo.
+	* gdb.c++/templates.cc: Fix syntax error.
+
+1999-03-09  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* gdb.base/call-ar-st.c (main): Terminate char_array with a null
+ 	character, so GDB won't print garbage after its end.
+	
+	* gdb.base/call-ar-st.exp: Don't step into sum_array_print; set a
+	breakpoint there instead.  Sometimes GCC emits memcpy to handle
+	the large structures being passed by value, so we step into that
+	instead of sum_array_print, which obscures what we're really testing.
+	* gdb.base/step-test.exp: However, we do want a test that notices
+ 	the bizarre steps into memcpy, so do that here.  Add check for
+ 	stepping into function calls that pass large structures by value.
+  	("Is that a noun clause, or are you just happy to see me?")
+	Remove all references to specific line numbers.
+	* gdb.base/step-test.c (struct rhomboidal, large_struct_by_value):
+	New type and function.
+	(main): Call large_struct_by_value, passing it a large struct by value.
+	* lib/gdb.exp (gdb_get_line_number): New function.
+
+	* gdb.base/step-test.exp: Rewrite `stepi' and `nexti' tests to be
+	more portable.
+
+	* lib/gdb.exp: Doc fixes.
+
+	* gdb.base/display.exp: Don't exercise the "detach" and "kill"
+ 	commands.  They're not germane to this test, and they don't work
+ 	that way on remote targets.
+
+1999-02-25  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gdb.base/call-ar-st.c: Include string.h, not strings.h.
+	* gdb.base/call-rt-st.c: Ditto.
+
+1999-02-23  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* configure.in: Formatting fix.
+	* configure: Regenerated.
+
+1999-02-13  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* gdb.threads/pthreads.exp (horiz): New variable.
+	(test_startup): Fix regexps that capture thread numbers.
+
+1999-02-10  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gdb.base/smoke.exp: Disambiguate two test case names (both
+	called ``print'').
+
+Fri Feb  5 12:42:56 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/volatile.exp: Use gdb_test, add xfails for GCC
+ 	compilation.
+
+1999-02-04  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gdb.base/miscexprs.exp: Change patterns to match GDB's
+	actual output formatting.
+	* gdb.base/smoke.exp: GDB removes leading 0's.
+	* gdb.base/volatile.exp: Don't check type of remuneration;
+	that variable is no longer defined in constvars.c.
+	* gdb.base/step-test.c (main): Exit with explicit exit code.
+	* gdb.base/step-test.exp: Remove two nexti checks--they are
+	not portable.
+
+1999-02-04  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* gdb.base/help.exp ("help delete display"): Fix test to match
+	gdb's output.
+
+	* gdb.base/long_long.c (known_types): Initialize values to zero.
+	* gdb.base/long_long.exp: Step one more line
+	so 'dec' is initialized in "get to known place".  GDB removes
+        leading zeros.  Explicitly ask for hex formatting.  Use 
+        unique test case names.
+
+Tue Feb  2 10:16:08 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* lib/gdb.exp (gdb_preprocess): Remove 'puts' statement. 
+
+	* gdb.c++/method.exp: Add missing close brace.
+
+1999-01-30  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* gdb.base/maint.exp: Use 'set height 0' to disable page
+	prompting, not 'set height 400'.
+
+	Fix a bunch of timeouts.
+	* gdb.base/maint.exp ("maint print objfiles"): Break this up into
+	four separate tests, so expect doesn't take forever to match a ton
+	of text against a regexp with lots of .* forms.
+	("maint print psymbols", "maint print symbols"): Make some of
+	these greps more selective, so that expect doesn't try to wade
+	through huge piles of output and time out.
+
+	* gdb.base/maint.exp ("maint print msymbols"): Fix pattern.
+
+	* gdb.base/maint.exp ("maint info breakpoints"): Split into two
+ 	tests: one which doesn't expect shlib events to be reported, and
+ 	another which does, but is XFAIL for all platforms other than
+ 	HP/UX.
+
+	* gdb.base/break.exp: Teach the test suite that the `catch
+	fork', `catch vfork', and `catch exec' commands produce error
+	messages on platforms that don't provide these features.
+
+Mon Jan 25 18:35:56 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.hp/gen-so-thresh.c, so-thresh.sh, so-thresh.exp,
+ 	so-thresh.linkopts, so-thresh.mk: Move to gdb.hp from gdb.base
+ 	(shortening names from solib_threshold.exp etc), won't run on
+ 	anything but HP-UX for the foreseeable future.
+	* gdb.hp/Makefile.in, gdb.base/Makefile.in (clean): Adjust to
+ 	reflect move.
+
+Thu Jan 21 15:46:49 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/Makefile.in, gdb.c++/Makefile.in,
+ 	gdb.trace/Makefile.in (clean): Remove all test executables.
+
+Tue Jan 19 17:20:09 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* gdb.base/shlib-call.exp: add test cases to verify that gdb
+	successfully re-sets breakpoints in shared libraries.
+	* gdb.base/shmain.c (main): return 0, don't fall off the end.
+
+Fri Jan 15 14:04:57 1999  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* gdb.hp/xdb3.exp: do not execute unless on hppa-hpux platform 
+	and compiled w/o GCC. 
+
+	* gdb.hp/watch-cmd.exp: ditto.
+
+	* gdb.hp/watch-hp.exp: ditto.
+
+	* gdb.hp/xdb1.exp: ditto.
+
+	* gdb.hp/xdb2.exp: ditto.
+
+	* gdb.hp/dbx.exp: ditto.
+
+Thu Jan 14 18:36:48 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* constvars.c: Remove C++-isms.
+	* constvars.exp: Use gdb_test everywhere, add xfails if compiled
+ 	with GCC.
+
+Mon Jan 11 10:08:03 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes are part of the HP merge.
+
+	* gdb.base/break.exp: new tests to verify that catchpoints for
+	fork, vfork, and exec don't trigger inappropriately.
+
+	* gdb.base/opaque.exp: compile one file at a time, then link.
+
+	* gdb.base/signals.exp: be more restrictive about which hppa
+	systems receive a setup_xfail.  new tests.
+
+	* gdb.base/solib_threshold.build: new file.
+	* gdb.base/solib_threshold.exp: new file.
+	* gdb.base/solib_threshold.link_opts: new file.
+	* gdb.base/solib_threshold.mk: new file.
+	* gdb.base/gen_solib_threshold.c: new file.
+
+	* gdb.c++/classes.exp: if on HPUX and not using gcc, skip the
+	tests.  New tests for enums inside classes.
+
+	* gdb.c++/compiler.cc: indicate support of template debugging.
+
+	* gdb.c++/demangle.exp: run hp style demangling tests.
+
+	* gdb.c++/inherit.exp: if on HPUX and not using gcc, skip the
+	tests.
+
+	* gdb.c++/misc.cc: changes to support new tests.
+
+	* gdb.c++/templates.cc: changes to support HP's compiler; changes
+	to support new tests.
+
+	* gdb.c++/virtfunc.exp: if we are on HPUX and we are not using
+	gcc, then skip these tests.
+
+Sun Jan 10 23:44:11 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following files are part of the HP merge; some had longer
+	names at HP, but have been renamed to be no more than 14
+	characters in length.
+
+	* gdb.hp/ambiguous.cc: new file.
+	* gdb.hp/ambiguous.exp: new file.
+	* gdb.hp/attach.exp: new file.
+	* gdb.hp/attach2.exp: new file.
+	* gdb.hp/classes-hp.exp: new file.
+	* gdb.hp/ctti.exp: new file.
+	* gdb.hp/ctti-add.cc: new file.
+	* gdb.hp/ctti-add1.cc: new file.
+	* gdb.hp/ctti-add2.cc: new file.
+	* gdb.hp/ctti-add3.cc: new file.
+	* gdb.hp/dbx.exp: new file.
+	* gdb.hp/exception.cc: new file.
+	* gdb.hp/exception.exp: new file.
+	* gdb.hp/foll-exec.c: new file.
+	* gdb.hp/foll-exec.exp: new file.
+	* gdb.hp/foll-fork.c: new file.
+	* gdb.hp/foll-fork.exp: new file.
+	* gdb.hp/foll-vfork.c: new file.
+	* gdb.hp/foll-vfork.exp: new file.
+	* gdb.hp/inherit-hp.exp: new file.
+	* gdb.hp/more-steps.exp: new file.
+	* gdb.hp/namespace.cc: new file.
+	* gdb.hp/namespace.exp: new file.
+	* gdb.hp/optimize.exp: new file.
+	* gdb.hp/pxdb.c: new file.
+	* gdb.hp/pxdb.exp: new file.
+	* gdb.hp/quicksort.exp: new file.
+	* gdb.hp/reg-test.exp: new file.
+	* gdb.hp/reg-test.s: new file.
+	* gdb.hp/sized-enum.c: new file.
+	* gdb.hp/sized-enum.exp: new file.
+	* gdb.hp/start-stop.exp: new file.
+	* gdb.hp/templ-hp.cc: new file.
+	* gdb.hp/templ-hp.exp: new file.
+	* gdb.hp/thr-lib.c: new file.
+	* gdb.hp/thr-lib.exp: new file.
+	* gdb.hp/thr-lib.h: new file.
+	* gdb.hp/thr-liblib.c: new file.
+	* gdb.hp/virtfun-hp.c: new file.
+	* gdb.hp/virtfun-hp.exp: new file.
+	* gdb.hp/watch-cmd.exp: new file.
+	* gdb.hp/watch-hp.exp: new file.
+	* gdb.hp/xdb1.exp: new file.
+	* gdb.hp/xdb2.exp: new file.
+	* gdb.hp/xdb3.exp: new file.
+
+Wed Jan  6 18:41:15 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following files are part of the HP merge; some had longer
+	names at HP, but have been renamed to be no more than 14
+	characters in length.
+
+	* gdb.base/ss.h: new file.
+	* gdb.base/call-ar-st.c: new file.
+	* gdb.base/call-ar-st.exp: new file.
+	* gdb.base/call-rt-st.c: new file.
+	* gdb.base/call-rt-st-exp: new file.
+	* gdb.base/call-strs.exp: new file.
+	* gdb.base/ena-dis-br.exp: new file.
+	* gdb.base/environ.exp: new file.
+	* gdb.base/long_long.exp: new file.
+	* gdb.base/sect-cmd.exp: new file.
+	* gdb.base/shlib-cl2.exp: new file.
+	* gdb.base/smoke.exp: new file.
+	* gdb.base/so-impl-ld.c: new file.
+	* gdb.base/so-impl-ld.exp: new file.
+	* gdb.base/so-indr-cl.c: new file.
+	* gdb.base/so-indr-cl.exp: new file.
+	* gdb.base/varargs.exp: new file.
+	* gdb.base/volatile.exp: new file.
+	* gdb.base/whatis-exp.exp: new file.
+	* gdb.c++/derivation.exp: new file.
+	* gdb.c++/local.exp: new file.
+	* gdb.c++/member-ptr.exp: new file.
+	* gdb.c++/overload.exp: new file.
+	* gdb.c++/ovldbreak.exp: new file.
+	* gdb.c++/ref-types.exp: new file.
+	* gdb.c++/ref-types2.exp: new file.
+	* gdb.c++/userdef.exp: new file.
+	
+Wed Jan  6 13:50:57 1999  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/default.exp: Reflect wording change in remote.c.
+
+Tue Jan  5 19:14:51 1999  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/help.exp: Update to reflect current text.
+
+Tue Jan  5 13:05:32 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	* gdb.c++/anon-union.cc: make foo and bar global, otherwise
+	they're stack variables and contain garbage.
+	* gdb.c++/anon-union.exp: new file.
+
+	The following changes were made by David Taylor
+ 	<taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and
+ 	Edith Epstein <eepstein@cygnus.com> as part of a project to merge
+ 	in changes by HP.
+
+	* gdb.base/bitops.exp: new file.
+	* gdb.base/default.exp: change expected messages for catch and
+	info catch tests to reflect HP merge changes.
+	* gdb.base/enable-disable-break.exp
+	* gdb.base/ending-run.c: new file.
+	* gdb.base/long_long.c: new file.
+	* gdb.base/maint.exp: new file.
+	* gdb.base/pointers2.exp: new file.
+	* gdb.base/shlib-call2.exp: new file.
+	* gdb.base/solib.exp: new file.
+	* gdb.base/step-test.c: new file.
+	* gdb.c++/anon-union.cc: new file.
+	* gdb.c++/local.cc: new file.
+	* gdb.c++/member-pointer.cc: new file.
+	* gdb.c++/method.cc: new file.
+	* gdb.c++/ref-types.cc: new file.
+	* gdb.c++/ref-types2.cc: new file.
+	* gdb.c++/userdef.cc: new file.
+	
+	* gdb.base/scope.exp: compile one file at a time, then link.
+	* gdb.base/langs.exp: ditto.
+	* gdb.base/list.exp: ditto.
+	
+Mon Jan  4 10:06:43 1999  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by David Taylor
+ 	<taylor@cygnus.com>, Elena Zannoni <ezannoni@cygnus.com>, and
+ 	Edith Epstein <eepstein@cygnus.com> as part of a project to merge
+ 	in changes by HP.
+	
+	* gdb.c++/inherit.exp: if on hppa*-*-hpux* and not using gcc,
+	skip tests.  When compiling pass c++ flag to gdb_compile.
+	* gdb.c++/
+	
+	* lib/gdb.exp (get_compiler_info): new, optional argument -- args;
+	test for on hppa*-*-hpux*; use args to see if c++ was specified.
+	(skip_hp_tests): new function.
+	(gdb_preprocess): new function.
+
+	* configure.in (hpdir): decide whether to configure gdb.hp.
+	* configure: regenerated.
+
+	* gdb.base/Makefile.in (MISCELLANEOUS): new macros -- extra things
+	to delete on clean.
+	(EXECUTABLES): update to reflect new additions.
+	* gdb.base/commands.exp: update message expected.
+	* gdb.base/default.exp: add copyright notice.
+	* gdb.base/funcargs.exp (timeout): if hpux, increase timeout.
+	* gdb.base/help.exp: update messages to reflect current text.
+	* gdb.base/recurse.exp: add hpppa*-*-bsd* to 'list' of enabled
+	targets for recurse tests.
+	* gdb.base/watchpoint.exp: if on hpux and not gcc compiled, then
+	skip this file.
+
+	* gdb.c++/Makefile.in (PROGS): update to reflect new executables.
+	* gdb.c++/cplusfuncs.exp: tell gdb_compile that it's a c++
+	compilation.
+	* gdb.c++/misc.exp: ditto.
+	* gdb.c++/templates.exp: if we're on hpux and it's not gcc, don't
+	run the tests.  tell gdb_compile that it's a c++ compilation.
+
+	* gdb.threads/pthreads.exp: fix typo in message.
+	
+	* gdb.base/all-bin.exp: new file.
+	* gdb.base/arithmet.exp: new file.
+	* gdb.base/assign.exp: new file.
+	* gdb.base/completion.exp: new file.
+	* gdb.base/cond-expr.exp: new file.
+	* gdb.base/condbreak.exp: new file.
+	* gdb.base/define.exp: new file.
+	* gdb.base/dollar.exp: new file.
+	* gdb.base/environment.exp: new file.
+	* gdb.base/eval-skip.exp: new file.
+	* gdb.base/jump.exp: new file.
+	* gdb.base/logical.exp: new file.
+	* gdb.base/pointers.exp: new file.
+	* gdb.base/relational.exp: new file.
+	* gdb.base/section_command.exp: new file.
+	* gdb.base/whatis-expr.exp: new file.
+
+	* gdb.base/all-types.c: new file.
+	* gdb.base/call-array-struct.c: new file.
+	* gdb.base/call-return-struct.c: new file.
+	* gdb.base/call-strings.c: new file.
+	* gdb.base/callfuncs2.c: new file.
+	* gdb.base/condbreak.c: new file.
+	* gdb.base/constvars.c: new file.
+	* gdb.base/display.c: new file.
+	* gdb.base/int-type.c: new file.
+	* gdb.base/jump.c: new file.
+	* gdb.base/miscexprs.c: new file.
+	* gdb.base/pointers.c: new file.
+	* gdb.base/pointers2.c: new file.
+	* gdb.base/shmain.c: new file.
+	* gdb.base/shr1.c: new file.
+	* gdb.base/shr2.c: new file.
+	* gdb.base/solib.c: new file.
+	* gdb.base/solib1.c: new file.
+	* gdb.base/solib2.c: new file.
+	* gdb.base/varargs.c: new file.
+	* gdb.c++/derivation.cc: new file.
+	* gdb.c++/overload.cc: new file.
+	* gdb.c++/ovldbreak.cc: new file.
+	* gdb.hp/attach.c: new file.
+	* gdb.hp/attach2.c: new file.
+	* gdb.hp/average.c: new file.
+	* gdb.hp/compiler.c: new file.
+	* gdb.hp/compiler.cc: new file.
+	* gdb.hp/execd-program.c: new file.
+	* gdb.hp/follow-exec.c: new file.
+	* gdb.hp/follow-fork.c: new file.
+	* gdb.hp/follow-vfork-and-exec.c: new file.
+	* gdb.hp/misc-hp.cc: new file.
+	* gdb.hp/more-steps.c: new file.
+	* gdb.hp/optimize.c: new file.
+	* gdb.hp/quicksort.c: new file.
+	* gdb.hp/run-hp.c: new file.
+	* gdb.hp/start-stop.c: new file.
+	* gdb.hp/sum.c: new file.
+	* gdb.hp/templates-hp.cc: new file.
+	* gdb.hp/thread-local-in-lib.c: new file.
+	* gdb.hp/thread-local-in-lib.h: new file.
+	* gdb.hp/thread-local-in-lib.lib.c: new file.
+	* gdb.hp/vforked-program.c: new file.
+	* gdb.hp/virtfunc-hp.cc: new file.
+	* gdb.hp/watchpoint-hp.c: new file.
+	* gdb.hp/xdb.c: new file.
+	* gdb.hp/xdb0.c: new file.
+	* gdb.hp/xdb0.h: new file.
+	* gdb.hp/xdb1.c: new file.
+
+Mon Dec 21 14:08:38 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following change was made by Edith Epstein
+ 	<eepstein@cygnus.com> as part of a project to merge in changes
+ 	originally made by HP; HP did not create ChangeLog entries.
+
+	* gdb.c++/demangle.exp: changed the expected output for some
+	ARM-style mangling -- removed second reference to datatype.
+ 	For example, maint demangle __dt__11T1__pt__2_cFv
+                     T1<char>::~T1<char>(void)
+	becomes,
+	             maint demangle __dt__11T1__pt__2_cFv
+                     T1<char>::~T1(void)
+
+ 	(test_hp_style_demangling): new hp specific demangling test cases.
+	
+Mon Dec 14 15:07:03 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.trace/actions.exp: Ignore compiler warnings compiling actions.c
+	* gdb.trace/backtrace.exp: Likewise.
+	* gdb.trace/circ.exp: Likewise.
+	* gdb.trace/collection.exp: Likewise.
+	* gdb.trace/deltrace.exp: Likewise.
+	* gdb.trace/infotrace.exp: Likewise.
+	* gdb.trace/limits.exp: Likewise.
+	* gdb.trace/packetlen.exp: Likewise.
+	* gdb.trace/passc-dyn.exp: Likewise.
+	* gdb.trace/passcount.exp: Likewise.
+	* gdb.trace/report.exp: Likewise.
+	* gdb.trace/save-trace.exp: Likewise.
+	* gdb.trace/tfind.exp: Likewise.
+	* gdb.trace/tracecmd.exp: Likewise.
+	* gdb.trace/while-dyn.exp: Likewise.
+	* gdb.trace/while-stepping.exp: Likewise.
+
+1998-12-07  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* gdb.base/restore.exp, gdb.base/restore.c: New tests.
+
+Wed Dec  2 20:03:53 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Brendan Kehoe:
+	* gdb.c++/cplusfuncs.cc, misc.cc, virtfunc.cc: Add now-required
+	int return types.
+
+Sat Oct 24 18:04:22 1998  Felix Lee  <flee@cygnus.com>
+
+	* config/slite.exp (gdb_load): use gdb_file_cmd, so we can do
+ 	remote dos host testing right.
+
+Mon Oct 19 01:31:59 1998  Felix Lee  <flee@cygnus.com>
+
+	* gdb.base/corefile.exp: remove some xfails.
+
+Thu Oct 15 10:04:38 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/reread.exp: Sleep 1 - ensures that the two executables
+ 	have different timestamps.
+
+Thu Oct  1 20:56:14 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* lib/gdb.exp, gdb.base/default.exp, config/monitor.exp,
+ 	gdb.base/default.exp: Replace "exec" with "executable".
+
+Tue Sep 29 15:06:29 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/default.exp: Change else if to elseif from previous
+ 	delta.
+
+Mon Sep 28 13:21:43 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* gdb.base/default.exp: Add brace missing from previous delta.
+
+Mon Sep 21 14:39:27 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* gdb.base/default.exp: Support test for info float for all
+	varieties of arm toolchain.
+
+Fri Sep 18 14:07:44 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.trace/*.exp: remove "remote_download" command.
+
+Wed Sep 16 11:38:21 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.trace/*.exp: remove -gdwarf from compile.
+
+Wed Sep 16 01:23:11 1998  Felix Lee  <flee@cygnus.com>
+
+	* gdb.trace/configure.in(AC_INIT): typo
+	* gdb.trace/configure: regenerated
+
+Mon Sep 14 20:00:04 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/m68k-emc.exp: New file.
+	* lib/<emc-support.exp trace-support.exp}: New files.
+	* configure.in: add new test directory gdb.trace.
+	* gdb.trace/{configure configure.in Makefile.in}: New files.
+	* gdb.trace/{actions.c actions.exp gdb_c_test.c}: New files.
+	* gdb.trace/{circ.c circ.exp limits.c limits.exp}: New files.
+	* gdb.trace/{collection.c collection.exp tfind.exp }: New files.
+	* gdb.trace/{backtrace.exp deltrace.exp infotrace.exp}: New files.
+	* gdb.trace/{packetlen.exp passc-dyn.exp passcount.exp}: New files.
+	* gdb.trace/{report.exp save-trace.exp tracecmd.exp}: New files.
+	* gdb.trace/{while-dyn.exp while-stepping.exp}: New files.
+	
+Fri Sep 11 13:58:02 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.c++/classes.exp: Change all regular expressions to match
+	arbitrary combinations of newline/carriage-return, so that they
+	will work equally well on Unix and Windows.
+	* gdb.c++/inherit.exp: ditto.
+	* gdb.c++/virtfunc.exp: ditto.
+
+1998-08-11 Dawn Perchik  <dawn@cygnus.com>
+
+	* gdb.base/setshow.exp: Fix error introduced by call to runto_main.
+
+1998-07-11  Felix Lee  <flee@cygnus.com>
+
+	* gdb.base/callfuncs.exp: add cmp10 test.
+	* gdb.base/callfuncs.c (cmp10): new function.
+
+Thurs Jul 9 11:08:31 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* gdb.base/commands.exp: Break up infrun_breakpoint_command_test 
+	into two parts to get around a synchronization problem in expect.
+
+Fri Jun 26 14:52:47 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* gdb.fortran/types.exp:  Escape brackets in expect patterns
+	for test_float_literal_types_accepted tests.
+	* gdb.base/scope.exp:  Remove extraneous newline in filelocal_bss
+	before run test.
+
+1998-06-25  Felix Lee  <flee@cygnus.com>
+
+	* gdb.base/setshow.exp: make sure $pc is sane.
+
+	* gdb.stabs/weird.exp: split expect patterns properly.
+
+Tue Jun 23 11:45:01 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/funcargs.exp: simplify expect strings to ease pattern
+	match processing (and eliminate spurious timeouts when running).
+
+Fri Jun 12 17:28:22 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/signals.exp (test_handle_all_print): put back Mach
+	exception test, but conditionalize it on target [mach | gnu].
+
+Wed Jun 10 10:40:03 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/overlays.exp: fixup compile line for linker script.
+
+Thu Jun  4 21:54:15 1998  Felix Lee  <flee@zog.cygnus.com>
+
+	* gdb.fortran/types.exp: don't guess at float size.
+
+Thu May 21 02:28:37 1998  Felix Lee  <flee@zog.cygnus.com>
+
+	* gdb.base/exprs.exp: delete test that depends on int size.
+
+Sun May 17 17:10:22 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sim.exp: Removed checks for target triplets.
+	(gdb_target_sim): Use gdb,target_sim_options.
+
+Sat May 16 23:43:35 1998  Mark Alexander  <marka@cygnus.com>
+
+	* gdb.base/reread.exp: New file.
+	* gdb.base/reread1.c: New file.
+	* gdb.base/reread2.c: New file.
+
+Sat May 16 23:22:09 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/sim.exp: Use 'target sim -sparclite' when running
+	SPARClite programs.
+
+Sat May 16 18:48:08 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* gdb.base/structs2.exp: New file.
+	* gdb.base/structs2.c: New file.
+
+Wed May 13 13:36:14 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* gdb.asm/common.inc: New file.
+	* gdb.asm/d10v.inc: New file.
+	* asm-source.exp: Pass -I's to gas to find .inc files.
+	Update line numbers in expected output.
+	* asmsrc1.s: Rewrite.
+	* asmsrc2.s: Rewrite.
+	* configure.in: Create arch.inc symlink.
+	* configure: Regenerate.
+	* Makefile.in (distclean): Delete arch.inc.
+
+Wed May  6 10:30:54 1998  John Metzler  <jmetzler@cygnus.com>
+
+	*  callfuncs.c (t_enum_value1) : Cleanup return value warnings
+ 	(t_enum_value2): ditto
+ 	(t_enum_value3): ditto
+ 	(main): ditto
+Fri May  1 09:33:37 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* gdb.base/break.exp:  Remove xfail for `deleting all breakpoints
+	when none' unexpected prompt case, fixed by breakpoint.c:delete_command
+	change.
+	Use gdb_test instead of send_gdb/gdb_expect sequences.
+
+Thu Apr 23 12:56:19 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gdb.c++/virtfunc.cc: Declare extern "C" printf to return int,
+	not void.
+
+Thu Apr 16 10:52:34 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* gdb.base/branches.c: Code with lots of loops and
+ 	subroutines. Used to test gdbs ability to single step through PC
+ 	changes, especially to test mips-tdep.c:mips_next_pc
+
+Mon Apr 13 22:32:51 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+	* gdb.c++/virtfunc.cc: Make extern "C" printf declaration pass
+	more rigorous EGCS C++ error checking.
+
+Fri Apr 10 22:38:12 1998 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * gdb.base/help.exp:  Clean up `help set args' and `help show args'
+        tests.                                                             
+        * gdb.base/interrupt.exp:  Add "i*86-*-solaris2*" xfail for calling
+        function when asleep.                                              
+        * gdb.base/signals.exp:  Add "i*86-*-solaris2*" xfails. Add comment
+        for i*86 Linux and SVR4 signal handling problems.                  
+        Remove linux xfail for `next to handler in signals_tests_1', fixed 
+        by recent infrun.c change.                                         
+        Limit backtrace to 10 frames to avoid timeout problems with infinite
+        stack backtraces.                                                   
+        Adjust expect pattern in `handle all print' test to match Apr 28 1997
+        target.[ch] change.
+
+Tue Mar 31 00:40:32 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_test): Send multiline commands one at a time; wait
+	for a newline from gdb before continuing.
+	(default_gdb_exit): Just look for y or n.
+	(gdb_test): Detect abnormal exit from GDB running on DOS; if
+	it does, fail the rests of the tests in the file.
+
+Tue Mar 24 22:44:52 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/cygmon.exp: New file.
+
+Mon Mar 16 21:39:11 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/list.exp: Fix problem with "list default lines around
+ 	main" test on remote targets.
+
+	* gdb.base/scope.exp: Fix problem with filelocal_bss before
+	run test on remote targets.
+
+Thu Mar 12 16:23:00 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* gdb.asm: New directory.
+	* configure.in: Configure it.
+	* configure: Regenerate.
+	* gdb.asm/{Makefile.in,configure.in,configure}: New files.
+	* gdb.asm/{asm-source.exp,asmsrc1.s,asmsrc2.s}: New files.
+
+Mon Feb 23 08:22:44 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/mn10300-eval.exp: New file to support MN10300 eval board.
+
+Wed Feb 18 16:43:46 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+ 
+        * gdb.base/overlays (several files): Merge the two overlay
+        managers into one.  Change variables (foox, barx, bazx, grbxx)
+        back into ints but force them to load in their proper sections.
+
+Thu Feb 12 13:49:30 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/d10vovly.c (D10VTranslate): Map IMAP0 to low 128k of
+ 	on-chip insn memory and IMAP1 to upper 128k.
+	(D10VCopy): Handle memory regions crossing 16k boundaries.
+	(D10VCopy): Transfer data in 32 bit chunks.
+
+Tue Feb 10 17:23:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/overlays.c (main): Exit normally when result is
+ 	correct.
+
+	* gdb.base/d10v.ld: Update LMAs to reflect current d10v address
+ 	map.  Include space for printf in .text segment.
+
+	* gdb.base/d10vovly.c (D10VTranslate): New function, handle
+ 	updated d10v memory VMA/LMA map.
+	(D10VCopy): Call D10VTranslate.
+	
+Fri Feb  6 14:13:12 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/m32rovly.c: Force variable _novlys into .data section.
+
+	* gdb.base/bar.c (barx, bar): Change variable to small array so
+ 	that it won't be put into the .sdata - small data -
+ 	section. Update reference.
+	* gdb.base/baz.c (bazx, baz): Ditto.
+	* gdb.base/foo.c (foox, foo): Ditto.
+	* gdb.base/grbx.c (grbxx, grbx): Ditto.
+
+	* gdb.base/overlays.exp: Expect variables barx, bazx, foox, grbxx
+ 	to be arrays.
+	
+Thu Jan 29 14:48:19 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+ 
+        * gdb.base/overlays.exp: fix up and get working again.
+        Add tests for backtraces from an overlay function.
+ 
+Fri Jan 23 07:52:45 1998  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/watchpoint.exp: Set "d10v*-*-*" clear_xfail for
+	"calling function with watchpoint enabled".
+
+Thu Jan 22 14:23:29 1998  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/break.exp (test_next_with_recursion): Remove
+ 	gdb_suppress_tests for d10v-*-*.
+	* lib/gdb.exp (gdb_suppress_tests): Disable this function
+	pending review of whether it is useful or not.
+
+Tue Jan 20 13:02:09 1998  Mark Alexander  <marka@cygnus.com>
+
+	* gdb.base/funcargs.exp: Increase timeout for slow TX39 boards.
+
+Mon Jan 19 08:53:04 1998  Mark Alexander  <marka@cygnus.com>
+
+	* gdb.base/break.exp: Increase timeout for slow TX39 boards.
+	* config/dve.exp: New file to support Densan boards.
+
+Mon Dec 15 22:38:05 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/interrupt.exp: Document problem of simulators, signals,
+ 	reads and BSD.
+
+Wed Nov 26 22:29:18 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/monitor.exp: Be a bit less picky about the "Remote debugging"
+	response.
+
+	* gdb.c++/misc.exp: Call runto_main instead of doint it manually.
+
+Tue Nov 25 12:46:36 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/mips_pro.exp: Add "mips64*-*-elf" xfail for backtrace
+ 	test.
+
+	* gdb.base/funcargs.exp: Query GDB for target_sizeof_int,
+ 	target_sizeof_long and target_bigendian_p.
+	(structs_by_value, structs_by_reference): Check values according
+ 	to targets word size and endianess.
+	
+Mon Nov 24 16:37:06 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdb.base/langs.exp: For "continue to exit" ignore any trailing
+ 	output.
+
+Fri Oct 17 13:24:43 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/default.exp, gdb.base/help.exp, gdb.base/setshow.exp:
+ 	Update test of set args help to match source change.
+
+Fri Sep 26 17:36:20 1997  Jason Molenda  (crash@pern.cygnus.com)
+
+	* gdb.base/default.exp: Expect help system output to be in
+	alphabetical order.
+	* gdb.base/help.exp: Ditto.
+
+Wed Sep 24 13:08:14 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/signals.exp: Change "i*86-pc-linux-gnu" to
+	"i*86-pc-linux-gnu*".
+	* gdb.base/interrupt.exp: Ditto.
+	* gdb.base/corefile.exp: Ditto.
+
+	* lib/gdb.exp(gdb_compile): If is_vxworks target feature is set,
+ 	define vxworks when building the testcase.
+
+	* gdb.base/ptype.exp: Fix testnames to be unique.
+	* gdb.base/radix.exp: Ditto.
+	* gdb.base/term.exp: Ditto.
+	* gdb.base/whatis.exp: Ditto.
+	* gdb.c++/classes.exp: Ditto.
+
+Tue Sep 16 22:21:48 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/callfuncs.exp: Fix indentation.
+
+	* lib/gdb.exp(gdb_expect): Set remote_suppress_flag if
+	suppress_flag has been set.
+	(gdb_step_for_stub): Check for gdb,use_breakpoint_for_stub
+	target feature.
+
+Mon Sep 15 15:43:17 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.stabs/weird.exp: Don't start gdb 'til after we've compiled
+	the testcase.
+
+	* gdb.c++/cplusfuncs.cc(main): Add extern "C" declaration for
+ 	set_debug_traps() and breakpoint().
+	* gdb.c++/misc.cc (main): Ditto.
+	* gdb.c++/templates.cc (main): Ditto.
+	* gdb.c++/virtfunc.cc (main): Ditto.
+
+Fri Sep 12 16:56:38 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_step_for_stub): New function.
+	(gdb_run_cmd): Look for gdb,do_reload_on_run target feature--if it
+	exists, reload the executable and do a "continue" instead of
+	doing a jump.
+	(runto_main): Use gdb_step_for_stub.
+	
+	* gdb.base/break.exp: Use gdb_step_for_stub. Also, rename certain
+ 	tests to have unique names.
+	* gdb.base/callfuncs.exp: Ditto.
+	* gdb.base/commands.exp: Ditto.
+	* gdb.base/default.exp: Ditto.
+	* gdb.base/help.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/opaque.exp: Ditto.
+	* gdb.base/printcmds.exp: Ditto. Use a loop to emit multiple
+	similar tests.
+	
+	* gdb.base/setshow.c: Add set_debug_traps/breakpoint calls.
+	* gdb.c++/cplusfuncs.cc: Ditto.
+	* gdb.c++/virtfunc.cc: Ditto.
+
+	* config/monitor.exp: Keep track of the last file we saw, rather
+	than trying to get the info from gdb.
+
+	* gdb.fortran/types.exp: Move comment to previous line.
+
+Tue Sep  2 19:55:34 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sparclet.exp: Detect gratuitous change to sparclet gdb
+ 	target mode.
+
+Mon Jul 28 12:14:47 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From Bob Manson:
+	* config/monitor.exp (gdb_target_monitor): Look for "Connected to"
+ 	string from GDB when it connects.
+
+	* lib/gdb.exp: Look for $TOOL_EXECUTABLE.
+
+Thu Jul  3 15:35:12 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(get_debug_format): Don't cause the testsuite to fail
+ 	if we can't get a debug format from GDB (we may be testing an
+ 	older GDB). Use a 10 second timeout when checking for the format.
+
+	* gdb.stabs/weird.exp: Fix quoting.
+
+	* config/sparclet.exp: Renamed sparclet-loader.c to stub-loader.c.
+
+Mon Jun 30 18:31:43 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/arm-ice.exp: New file.
+
+Sun Jun 29 16:43:30 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/overlays.exp: Preliminary fixes; temporarily disabled
+ 	until it has been modified to work with the new testsuite.
+
+	* gdb.*/*.exp: Instead of causing 1 unresolved test when the
+ 	testcase won't compile, cause all of the testcases in the file to
+ 	fail instead.
+
+	* lib/gdb.exp(gdb_suppress_entire_file): New procedure.
+	(gdb_clear_suppressed): New procedure.
+	(gdb_stop_suppressing_tests): Only clear suppress_flag if
+	it contains a positive value.
+
+Sat Jun 28 13:31:11 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(default_gdb_start): Use gdb_opts host feature.
+
+	* gdb.c++/virtfunc.exp: Remove setting of libs variable.
+
+Fri Jun 27 07:44:25 1997  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp (setup_xfail_format): New function.
+	(get_debug_format): New function to get debug format.
+	(debug_format): New global variable to hold last value set
+	by get_debug_format.
+	* gdb.base/list.exp: Call get_debug_format and expect some
+ 	tests to fail for DWARF 1 and COFF formats.
+	* gdb.c++/ptype.exp: Ditto.
+	* gdb.c++/classes.exp: Ditto.
+	* gdb.c++/cplusfuncs.exp: Ditto.
+	* gdb.c++/inherit.exp: Ditto.
+	* gdb.c++/templates.exp: Ditto.
+	* gdb.c++/virtfunc.exp: Ditto.
+	
+Wed Jun 25 09:08:51 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(default_gdb_exit): Don't give an error if the remote
+	host doesn't have a currently-open connection.
+
+	* config/sparclet.exp: Cleanups and fixes to make it generic for
+ 	any gdb stub target. Handle cases where gdb doesn't respond when
+ 	interrupted in a sane fashion.
+
+	* config/m32r-stub.exp: Load sparclet.exp instead of trying to do the
+ 	same thing in a totally different way.
+
+	* config/monitor.exp: Pass in timeouts to gdb_expect instead of
+ 	setting "timeout".
+	(gdb_start): We set the global gdb_prompt variable in
+ 	default_gdb_init now.
+
+Sun Jun 22 09:11:02 1997  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/printcmds.exp: Fix "check for floating addition"
+	regexp to accept results within approx +/- .01 of exact value.
+	* lib/gdb.exp (gdb_test): Remove unused expect_out global decl.
+
+Wed Jun 18 11:11:39 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_init): Pass our arguments to default_gdb_init
+ 	properly.
+	(gdb_expect): Add optional timeout parameter, and add timeout
+	value to various calls.
+	(gdb_suppress_tests): Only give one warning message per group.
+
+Tue Jun 17 13:10:10 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_expect): Declare errorInfo and errorCode as
+ 	global variables. Handle getting a value for $timeout more
+ 	gracefully.
+
+Sat Jun 14 09:23:26 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp: Close connection to remote host if gdb doesn't
+ 	initialize.
+	(default_gdb_init): New procedure; allow gdb_init to be overridden
+ 	by a target configuration file.
+	(gdb_expect): Pass the timeout to remote_expect.
+
+	* config/monitor.exp(gdb_load): Fix typo in regexp.
+
+Thu Jun 12 20:57:12 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/funcargs.exp: Remove spurious suppress tests call.
+
+Tue Jun  3 15:20:20 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/monitor.exp(gdb_target_monitor): Call gdb_file_cmd
+ 	here. Call gdb_target_exec before rebooting the target, to make
+ 	sure the connection to the target is closed.
+	(gdb_load): Pass the name of the executable to gdb_target_monitor.
+	Don't call gdb_file_cmd here; let gdb_target_monitor do it.
+	Also detect "Timeout reading from remote" error.
+
+	* config/gdbserver.exp: Pass the executable being loaded to
+ 	gdb_target_monitor. Don't call gdb_file_cmd here; let
+ 	gdb_target_monitor do it.
+
+	* gdb.disasm/hppa.exp: Don't use exec_output.
+
+Fri May 23 13:28:29 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/list.exp: If we're debugging a non-native target,
+	try to set the pc register to point to the start of the
+	program before doing the first list command.
+
+	* gdb.c++/virtfunc.exp(gdb_virtfunc_restart): Make sure we run
+ 	test_calls after restarting.
+
+	* lib/gdb.exp(gdb_run_cmd): Send jump command again after
+ 	reloading.
+
+	* gdb.base/watchpoint.exp: Fix typo.
+
+	* gdb.base/setshow.exp: Check for use_gdb_stub.
+
+	* gdb.base/break.exp: Fix continue until exit test for the gdb
+ 	stub case.
+	* gdb.base/langs.exp: Ditto.
+
+	* config/monitor.exp(gdb_load): Handle gdb_sect_offset and
+ 	gdb_load_offset. If we weren't given a file to load, figure out
+ 	what the current file is and use it.
+
+	* config/i386-bozo.exp: New file.
+
+Thu May 22 18:51:32 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_expect): Look for gdb,timeout target
+	feature.
+
+	* config/proelf.exp: New entry.
+
+Wed May 21 21:23:16 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp: Remove spurious .* patterns at the beginning
+	of regexps.
+
+	* gdb.base/watchpoint.exp: Don't run the test_stepping
+	tests if gdb can't call functions on the target.
+
+	* gdb.base/setshow.exp: Don't run the set prompt tests if
+	the board has gdb_prompt set.
+
+Tue May 20 08:58:49 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/a2-run.exp: Change "gdb,noargs" to just "noargs".
+	* gdb.base/commands.exp: Likewise.
+	* gdb.base/setshow.exp: Likewise.
+
+Mon May 19 15:37:50 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/monitor.exp(gdb_start): Look for gdb_prompt target
+	feature.
+
+	* config/i960.exp: New file.
+
+Thu May  1 18:01:50 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/funcargs.exp: Check for gdb,short_int target
+	feature instead of looking for explicit target triplets.
+
+Mon Apr 28 17:27:40 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/printcmds.exp: add a couple more tests a la 
+	"p 123DEADBEEF", to check parse_number.
+	* top.c: change "to enable to enable" to "to enable" in a couple
+	of help strings.
+
+Thu Apr 24 14:38:18 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/callfuncs.exp: Mark some tests as expected to fail
+	on the mn10300.
+ 
+Mon Apr 21 15:05:42 1997  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a2-run.exp: Add arm-*-coff setup_xfails for cases
+	where the test executable is run with explicit args.
+	* gdb.base/default.exp: Handle arm-*-coff case for "info float".
+
+Mon Apr 21 13:38:58 1997  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/run.c: Use FAKEARGV to build test executable that
+	does not require a command line arg, since most simulators
+	don't currently support passing such an arg into the simulated
+	program.
+	* gdb.base/commands.exp: Change tests to insert the proper
+	value as the arg to the first recursive factorial call.  Change
+	compilation line to define FAKEARGV at compile time.
+
+Wed Apr  9 11:12:36 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/recurse.exp: Enable these tests for the mn10300.
+	* gdb.base/watchpoint.exp: Don't expect a failure for an "calling
+	function with watchpoint enabled" test.
+
+Tue Apr  8 19:33:20 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/watchpoint.exp(test_watchpoint_triggered_in_syscall):
+ 	Don't call gdb_test when the command doesn't return to a gdb prompt.
+
+	* lib/gdb.exp(gdb_stop_suppressing_tests): Don't print gratuitous
+ 	"Tests restarted" messages.
+
+Tue Apr  8 16:38:46 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/mn10300.exp: Fix buglets in "other" tests.
+
+Thu Apr  3 15:21:26 1997  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/help.exp: update help msg for INFO ADDR; add help test
+	for INFO SYMBOL; add help tests for OVERLAY commands.
+	* gdb.base/default.exp: add tests for INFO SYMBOL command;
+	add tests for OVERLAY commands
+	* gdb.base/overlays.c overlays.exp foo.c bar.c baz.c grbx.c ovlymgr.h
+	d10v.ld m32r.ld d10vovly.c m32rovly.c: add test case for overlays.
+	* gdb.base/sigall.c: add usestubs code frag
+	* gdb.base/watchpoint.exp: turn on complex watchpoint test for M32R.
+	
+Thu Apr  3 09:38:53 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_suppress_tests): Add explanation for subsequent
+	failures.
+	(gdb_stop_suppressing_tests): Note that tests have restarted.
+
+Wed Apr  2 19:04:20 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/h8300.exp: New file.
+
+Sun Mar 30 13:38:25 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/setshow.exp: Check for the existence of a
+	feature, not its value.
+
+Sat Mar 29 11:19:46 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.c++/virtfunc.exp: Restart gdb in a sane fashion.
+
+	* gdb.base/scope.exp: It's now init0(), not init().
+
+	* gdb.base/scope0.c: For now, change init() to be init0().
+
+	* config/monitor.exp: Use gdb_serial in preference to serial
+	or netport.
+
+	* lib/gdb.exp: Set GDB to [transform gdb] if we're using a remote host
+ 	and it's not already set.
+
+Fri Mar 28 19:54:18 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/setshow.exp: Only test the run command if the target
+ 	isn't using a stub and if it supports argument passing.
+
+Sat Mar 22 19:50:25 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/udi.exp(gdb_start): Make sure UDICONF is set
+	properly before starting gdb.
+
+Mon Mar 24 14:40:33 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/mn10300.s: New test file for mn10300 disassembler.
+	* gdb.disasm/mn10300.exp: Run mn10300 disassembler tests.
+	* gdb.disasm/Makefile.in: Remove "mn10300" when cleaning.
+
+Tue Mar 11 11:42:58 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/vx.exp: Use remote_ld, not vxworks_ld. Don't use
+ 	specialized code to reboot the board, use remote_reboot instead.
+
+	* config/vxworks29k.exp: Use vx.exp, not vx-gdb.exp.
+
+	* lib/gdb.exp: Add GDB_TESTCASE_OPTIONS.
+
+	* config/monitor.exp: Make sure we disconnect from the target.
+	Also, try a reboot/reload cycle instead of failing if the
+	load fails.
+
+Fri Mar  7 13:48:30 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/default.exp: Don't set match_max.
+	* gdb.base/help.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/signals.exp: Ditto.
+
+	* config/monitor.exp(gdb_load): If gdb,use_standard_load is
+	set, use remote_ld to download the testcase instead of
+	the GDB loader.
+
+Wed Mar  5 00:00:43 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/vr5000.exp: New file.
+
+	* config/monitor.exp(gdb_target_monitor): Add pattern for
+	"Ending remote" to detect errors in connecting.
+
+	* gdb.base/setshow.exp: Add .* within auto language test.
+
+	* lib/gdb.exp(gdb_run_cmd): Add check for gdb_init_command
+	target feature.
+
+	* config/monitor.exp(gdb_load): Check for a failure when loading,
+ 	and reboot the board if necessary.
+
+	* gdb.base/setvar.exp(test_set): Handle multiple prints within
+	a set of tests. Remove print.* from the patterns being checked.
+
+Mon Mar  3 11:57:43 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Use send_gdb consistently. Don't
+	refer to gdb_spawn_id.
+
+	* config/m32r-stub.exp: Remove references to gdb_spawn_id, no
+	longer used.
+	* config/sparclet.exp: Ditto.
+	* config/sparclet-old.exp: Ditto.
+	* config/slite.exp: Ditto.
+	* config/sim.exp: Ditto.
+	* gdb.base/funcargs.exp: Ditto.
+
+	* lib/gdb.exp:Remove references to gdb_spawn_id.
+	(gdb_expect): Move to remote.exp.
+
+Fri Feb 28 20:47:39 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/monitor.exp: Detect the "Couldn't establish connection"
+	message from GDB.
+
+Tue Feb 25 14:08:55 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/bitfields.exp: Use runto instead of explicit
+	gdb_run_cmd/gdb_expect sequences.
+
+	* gdb.base/break.exp(text_next_with_recursion): Add match for
+	gdb_expect call.
+
+	* config/monitor.exp(gdb_target_monitor): Calling exit loses big.
+	We also need to handle the "A program is being debugged already"
+	prompt from gdb. Use gdb_test to set the baud rate.
+
+	* lib/gdb.exp(gdb_init): Increase the default expect buffer size
+	to 20000. Really. I mean it.
+
+Mon Feb 24 13:23:26 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_test): Generate a FAIL message when send_gdb
+ 	fails. If suppress_flag is set, skip perror message about not
+ 	being able to send to GDB.
+	(send_gdb): If suppress_flag is set, don't try to send commands to
+ 	GDB.
+	(gdb_expect): If suppress_flag is set, always fail immediately.
+	(gdb_suppress_tests, gdb_stop_suppressing_tests): New functions.
+	(gdb_init): Call gdb_stop_suppressing_tests.
+	(default_gdb_exit): Ditto.
+	(default_gdb_start): Ditto.
+
+	* gdb.base/bitfields.exp: Call gdb_suppress_tests and
+ 	gdb_stop_suppressing_tests as appropriate.
+	* gdb.base/break.exp: Ditto.
+ 	* gdb.base/callfuncs.exp: Ditto.
+	* gdb.base/commands.exp: Ditto.
+	* gdb.base/exprs.exp: Ditto.
+ 	* gdb.base/funcargs.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/recurse.exp: Ditto.
+ 	* gdb.base/scope.exp:  Ditto.
+	* gdb.base/structs.exp: Ditto.
+	* gdb.c++/inherit.exp: Ditto.
+
+Sun Feb 23 19:56:02 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/vr4300.exp: New file.
+
+	* gdb.*/*.exp: Call gdb_expect instead of expect.
+	
+	* lib/gdb.exp(gdb_expect): New function.
+
+Thu Feb 20 13:57:01 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_init): New function.
+
+	* gdb.base/setvar.exp(test_set): Don't bother printing a PASS/FAIL
+ 	for each individual variable set.
+
+	* gdb.base/exprs.exp(test_expr): Make sure each test gets a unique
+	name.
+
+	* gdb.base/help.exp: Fix the syntax of a few gdb_test calls.
+
+	* gdb.base/scope.exp: Use gdb_test.
+
+	* gdb.base/ptype.exp: Don't call "gdb_exit; gdb_start" if we're
+	aborting; the testsuite driver will do that for us (see
+	gdb_finish). Also, use gdb_test in a few more places.
+
+Thu Feb 20 13:32:24 1997  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/help.exp: Fix syntax of "help info all-registers" test.
+
+Thu Feb 20 10:34:21 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/mn10200.s: Add "nop" after "main" so that "main"
+	and "add_tests" are not at the same address.
+
+Fri Feb 14 18:47:23 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/ptype.exp: Use gdb_test.
+
+Thu Feb 13 16:09:36 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/mn10200.s (misc_tests): Fix targets for "jsr" insns.
+	* gdb.disasm/mn10200.exp (misc_tests): Remove bogus line accidentally
+	left in.  No longer expect them to fail.
+
+	* gdb.stabs/*.mt; Deleted, no longer used.
+	* gdb.stabs/configure.in: Remove references to target makefile
+	frags.
+	* gdb.stabs/configure: Rebuilt.
+
+	* gdb.disasm/*.mt: Deleted, no longer used.
+	* gdb.disasm/configure.in: Remove references to target makefile
+	frags.  Use "sh3.s" as the unique filename for this directory.
+	* gdb.disasm/configure: Rebuilt.
+
+	* gdb.disasm/mn10200.s: New test file for mn10200 disassembler.
+	* gdb.disasm/mn10200.exp: Run mn10200 disassembler tests.
+	* gdb.disasm/Makefile.in: Remove "mn10200" when cleaning.
+
+Tue Feb 11 16:57:58 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/udi.exp: Use mondfe,name instead of remote_host.
+
+Tue Feb 11 11:22:36 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/watchpoint.exp: Don't expect a failure when calling
+	a function with a watchpoint enabled on the mn10200.
+
+	* gdb.stabs/weird.exp: Don't quit if "weird.s" doesn't exist
+	before trying to create it!
+
+Mon Feb 10 16:40:47 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/vx.exp: Use hostname instead of netport.
+
+	* config/vxworks.exp: New file.
+
+	* gdb.base/a2-run.exp: Change vxworks cases to use gdb_spawn_id.
+
+	* config/monitor.exp(gdb_target_monitor): Look for a prompt from
+ 	gdb before assuming everything worked. Send a ^C if a timeout
+	occurs.
+
+	* lib/gdb.exp(gdb_test): Check the result of send_gdb. Use
+	$gdb_spawn_id directly.
+	(gdb_run_cmd): Try _start as well as start. Use the target feature
+	gdb,start_symbol as the symbol to start from when jumping.
+
+Mon Feb 10 11:26:59 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/exprs.exp: Delete bogus/incorrect (and probably
+	redundant) test.
+
+	* gdb.base/recurse.exp: Relax final value test for 'b' so that
+	it doesn't lose for 16bit integer systems.
+
+Fri Feb  7 09:31:21 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.fortran/types.exp: If the target doesn't support "double"
+	data types, then expect "real" types to only be 4 bytes.
+
+	* gdb.c++/virtfunc.exp: Expect failure for virtual function
+	call tests if the target doesn't support inferior function calls.
+
+	* gdb.base/printcmds.exp: Allow minor deviation in FP values
+	in printf tests.
+
+Thu Feb  6 12:46:14 1997  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/help.exp: Disable "help set", "help show", and
+	"help support".  Simplify regexp for "help stack".
+
+	* gdb.base/default.exp: Set match_max to 5000 and the timeout
+	to 60 seconds.  Temporarily set match_max to 15000 around the
+	"info copying" test.
+
+	* gdb.base/nodebug.exp: Don't try to do an inferior function
+	call if the target doesn't support them.
+	* gdb.base/printcmds.exp: Likewise.
+	* gdb.base/setvar.exp: Likewise.
+	* gdb.base/structs.exp: Likewise.
+	* gdb.c++/templates.exp: Likewise.
+	* gdb.base/ptype.exp: Likewise.  Remove UDI specific stuff.
+
+	* gdb.base/recurse.exp: Enable for the mn10200.
+
+	* configure.in: Do configure gdb.stabs directory for *-*-elf
+	targets.
+	* configure: Rebuilt.
+
+	* gdb.base/break.exp: Check for gdb,noresults before testing
+	exit status and/or results from the target.
+	* gdb.base/watchpoint.exp, gdb.base/langs.exp: Likewise.
+	* lib/gdb.exp: Remove old (now bogus) initialization of
+	noinferior, noargs, noresults and nosignals.
+
+Tue Feb  4 21:52:17 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sh.exp: New file.
+
+	* config/slite.exp: Try to connect multiple times to the board
+	before rebooting. Only send a "monitor run" if need_monitor_run
+	is set.
+
+	* gdb.base/break.exp: Don't do the "stub continue" test if
+	the target has gdb_stub set.
+
+	* gdb.base/callfuncs.exp: Increase the timeout.
+
+	* gdb.base/interrupt.exp: Don't even try to compile the testcase
+	if the target has gdb,noinferiorio set.
+
+	* gdb.base/list.exp: Increase match_max to 10000 characters.
+
+	* gdb.base/sigall.exp: Check for gdb,nosignals on the target.
+
+	* gdb.base/watchpoint.exp: Check for gdb,noinferiorio on the
+	target.
+
+	* lib/gdb.exp(gdb_run_cmd): Fix for targets that use stubs.
+
+Mon Feb  3 12:09:37 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Make sure we call gdb_exit before
+ 	trying to delete the copy of gdb. Catch the file delete so we
+ 	don't die if the delete fails; also, the file should be copied to
+ 	the host, not to the build.
+
+Sun Feb  2 00:55:14 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* lib/gdb.exp(gdb_test): Surround the result pattern with
+ 	parenthesis in case it contains multiple regexps separated
+	with |.
+
+	* gdb.base/watchpoint.exp: Use gdb_test.
+	* gdb.base/default.exp: Ditto.
+
+Sat Feb  1 23:51:01 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.*/*.exp: Replace $prompt with $gdb_prompt.
+	
+	* gdb.base/scope.exp: Use gdb_test.
+	* gdb.c++/classes.exp: Ditto.
+	* gdb.c++/inherit.exp: Ditto.
+
+Fri Jan 31 13:09:12 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* gdb.base/crossload.exp: Don't use execute_anywhere, use
+	remote_exec instead.
+	* gdb.base/corefile.exp: Don't be ridiculous.
+	* gdb.base/*.c: Add missing stub invocations.
+
+Thu Jan 30 16:49:25 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/slite.exp: Miscellaneous fixes.
+
+	* lib/gdb.exp: Fix runto.
+
+	* gdb.base/signals.exp: Check for a gdb,nosignals feature of
+	the target.
+
+	* gdb.base/watchpoint.exp: Fix regexp.
+
+	* lib/gdb.exp(default_gdb_exit): Add a catch to the
+	close and wait commands, as the descriptor may now be
+	invalid. Always call "remote_close host".
+
+Tue Jan 28 14:42:31 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	   Major rewrite for testsuite revision.
+	
+	* lib/gdb.exp: Remove references to global CC, CXX, B_OPTIONS,
+	TARGET_INCLUDES, LDFLAGS and target_alias. Use gdb_spawn_id
+	instead of relying on spawn_id to always contain a valid
+	spawn id.
+	(get_compiler_info): New procedure to build the ${binfile}.ci
+	file, instead of replicating this in N different places.
+	(gdb_compile): New procedure.
+	
+	gdb.*/*.exp: Use gdb_compile and get_compiler_info (with
+ 	appropriate arguments) instead of compile. Use gdb_test in a lot
+ 	more places.  Use send_gdb instead of send. Always run gdb_start
+	at the start of a testcase, as this is no longer done magically.
+
+	config/*-gdb.exp: Rename without the -gdb suffix.
+
+	config/mips.exp: Use remote_close instead of exit_remote_shell.
+	config/monitor.exp: Use target_info instead of looking at
+	baud, timeout, etc.
+	config/sim.exp: Use gdb_spawn_id instead of relying on spawn_id.
+
+Sat Dec 14 00:43:57 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.c++/templates.exp (test_ptype_of_templates),
+	gdb.c++/inherit.exp (test_ptype_si, test_print_anon_union):
+	Update expect patterns for destructors and assignment operators
+	to match corresponding c-typeprint.c changes.
+	* gdb.c++/templates.exp (test_template_breakpoints):  Revert change
+	to destructor breakpoint test, GDB should be able to set the
+	destructor breakpoint without specifying arguments.
+
+Tue Dec  3 20:17:52 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.threads/pthreads.exp: Change result for failure to compile due
+	to lack of pthreads runtime support from an error to simply an
+	unsupported test, per dejagnu standards.
+
+Sun Dec  1 00:18:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* lib/gdb.exp (gdb_test):  Simplify expect pattern for the case
+	where GDB exits to reduce pattern match time.
+	(skip_chill_tests):  Skip chill tests for mips*-sgi-irix6*.
+
+	* gdb.base/nodebug.exp:  Add mips*-sgi-irix6* xfails.
+
+Tue Nov 26 18:29:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/callfuncs.exp: Turn on function call tests for h8300.
+	* gdb.base/default.exp:   ditto.
+	* gdb.base/nodebug.exp:   ditto.
+	* gdb.base/printcmds.exp: ditto.
+	* gdb.base/ptype.exp:     ditto.
+	* gdb.base/setvar.exp:    ditto.
+	* gdb.base/structs.exp:   ditto.
+	* gdb.base/setshow.c:     Guard against uninitialized values of argc.
+
+Tue Nov 26 17:23:28 1996  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure, */configure: Rebuild with autoconf 2.12.
+
+Sat Nov 23 13:32:15 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Change x86 linux setup_xfails to
+	use new i*86-pc-linux*-gnu quads.
+	* gdb.base/corefile.exp: Ditto.
+	* gdb.base/signals.exp: Ditto.
+	* gdb.base/sigall.exp: Ditto.
+	* gdb.base/interrupt.exp: Ditto.
+
+	* gdb.base/signals.exp (signal_tests_1): Remove setup_xfail
+	"i*86-*-linux" for "signal SIGUSR1".  Now works, at least with
+	RedHat 4.0.
+	
+	* gdb.threads/pthreads.c (_MIT_POSIX_THREADS): Define if target is
+ 	linux.  This allows the test case to at least compile on latest
+ 	linux, but still not run due to missing the threads runtime library.
+
+Fri Nov 22 10:13:29 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/a1-selftest.exp (do_steps_and_nexts):  Reinitialize source
+	directory to search gdb directory. Accept and step over conditional
+	stack alignment code. Consume $prompt in failure cases.
+	Reset timeout to $oldtimeout instead of some arbitrary value.
+	* gdb.base/nodebug.exp:  Limit backtrace to 10 frames to avoid
+	timeout problems with infinite stack backtraces.
+	* gdb.base/ptype.exp (ptype struct link, union tu_link):
+	Accept function parameters for linkfunc member.
+
+Thu Nov 21 09:17:19 1996  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp (CFLAGS): Remove, unreferenced.
+	(CXXFLAGS): Remove, unreferenced.
+	(B_OPTIONS): Add for -B options and add code to initialize with
+ 	previous -B options and also add -B option to pick up cross compiled
+ 	runtime.
+	(TARGET_INCLUDES): Add for -I options and add code to initialize when
+	doing cross compiles.
+	(target_alias): Declare global.
+	(xgcc): Set variable to full path of gcc in build tree.  Use findfile
+	to verify that gcc exists in build tree, and if so set CC to that
+	gcc and to use B_OPTIONS and TARGET_INCLUDES.
+	
+Tue Nov 12 16:20:13 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/inherit.exp (test_print_anon_union): Reenable
+	ptype test for anonymous union.  Fixup testcase to match
+	current gcc debug output.
+
+Mon Nov 11 14:12:06 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/funcargs.c: Use cast rather than "UL" suffix to
+	force argument to an unsigned long type.
+
+Mon Nov 11 10:27:55 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/inherit.exp (test_ptype_si): Fix tagless struct ptype
+ 	tests and anonymous union print/ptype tests.
+	* gdb.base/list.exp (test_forward-search): Increase timeout by
+	5 minutes for the "search extremely long line" case.
+	* lib/gdb.exp (gdb_test): Document that the third arg to gdb_test is
+	completely optional and that the pass/fail messages use the command as
+	the message if that third arg is a null string.
+	(gdb_test_exact):  Arrange that a null string pattern means match a
+	null string output rather than any output, which might include random
+ 	errors.
+	* gdb.base/mips_pro.exp: Add "mips*-sgi-irix4*" xfail for
+	backtrace test.
+	* gdb.c++/demangle.exp: Add a "*-*-*" xfail for test that was
+	always failing and failure is now exposed by gdb.exp changes.
+
+Sat Nov  9 11:13:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/inherit.exp (test_ptype_vi): Log some passes that
+	weren't being noted.
+
+Sat Nov  9 01:05:10 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/corefile.exp:  Consume $prompt in mmap fail cases.
+	* gdb.stabs/weird.exp:  Remove v_comb xfails.
+
+Tue Nov  5 10:44:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/[bitfields.exp crossload.exp funcargs.exp interrupt.exp
+	            list.exp scope.exp watchpoint.exp]
+	  Make all timeout error msgs explicitly say "(timeout)".
+	
+Mon Nov  4 12:03:06 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/monitor.exp: Increase download timeout to 1000 seconds.
+
+Mon Nov  4 12:02:26 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/m32r.exp: Increase timeout to 120 seconds.
+
+Sun Nov  3 14:37:05 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/classes.exp: Modify to handle current gcc C++ member ordering
+	and accept older ordering as obsolescent gcc or gdb.
+	* gdb.c++/templates.exp: Ditto.
+	* gdb.c++/virtfunc.exp: Ditto.
+
+Fri Nov  1 11:56:09 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/coremaker.c: Add code to mmap some data so we
+	can check that it ends up in the core file.
+	* gdb.base/corefile.exp: Add test to read mmapped data
+	from core file.
+
+Wed Oct 30 18:19:16 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/m32r.exp: New file.
+
+Mon Oct 21 14:40:50 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* testsuite/gdb.base/nodebug.exp:  Whack out -g options by hand so
+	that cflags can contains -gstabs, and work correctly for other tests.
+
+Mon Oct 21 14:00:37 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdb.base/setshow.exp: New file, tests show and set.
+	* gdb.base/setshow.c:   New file, tests show and set.
+	* gdb.base/help.exp: Add test for help set|show annotate.
+	* gdb.base/default.exp: Add test for set|show annotate.
+
+Wed Oct 16 19:03:54 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* testsuite/gdb.base/break.exp:  Make backtrace from factorial
+	errors unique.
+	* testsuite/gdb.base/nodebug.exp:  Whack out all -g options
+	explicitly.
+
+Tue Oct 15 16:45:02 1996  Stu Grossman  (grossman@critters.cygnus.com)
+
+	* config/sim-gdb.exp (gdb_target_sim):  Remove setting of height
+	and width commands.  This is done elsewhere.
+	* (gdb_start):  Don't call gdb_start_sim here.  That's already
+	done in gdb_load.  This fixes lots of failures in default.exp.
+
+Sun Oct 13 10:40:23 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>:
+	* gdb.base/mips_pro.exp: Fix misplaced gdb_exit/gdb_start/gdb_load.
+	* lib/gdb.exp (gdb_test): Treat failures due to program exiting
+	in the same we we treat other failures (since it may be an expected
+ 	condition), rather than as an error.
+	* gdb.base/signals.exp (test_handle_all_print): Revert back to
+	old test format.
+
+Fri Oct 11 17:05:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (clean mostlyclean): Also remove chill *.grt files.
+	(distclean maintainer-clean realclean): No need to remove files
+ 	twice.  Nuke the duplicates.
+	* gdb.base/Makefile.in (EXECUTABLES): Add "structs".
+	* gdb.threads/Makefile.in (distclean maintainer-clean realclean): 
+	Remove config.h along with other config files.
+
+Mon Sep 30 20:16:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/interrupt.exp: Add i*86-*-linux* setup_xfail for
+	"p func1 ()" and note that rests of tests are skipped.
+	* gdb.base/corefile.exp: Add i*86-*-linux* and m68*-*-hpux*
+ 	setup_xfails for "print func2::coremaker_local".
+	Add i*86-*-linux* setup_xfail for "backtrace in corefile.exp".
+	* gdb.base/mips_pro.exp: Restart gdb in this test so it isn't
+	affected by the previous run test.
+	* gdb.chill/misc.exp: Add m68*-*-hpux* setup_xfails for
+	"print array () ubyte (foo)" and "print/x array () byte (\$i)"
+	* gdb.chill/pr-8742.exp: Add m68*-*-hpux* setup_xfails for
+	"pass int powerset tuple" and "pass modeless int powerset tuple".
+	* gdb.chill/tests2.exp: Add m68*-*-hpux* setup xfails for
+	"real write 4" and "real write 8".
+	* gdb.shill/tuples.exp: Add i*86-*-linux* and m68*-*-hpux*
+ 	setup_xfails for "print vs1 after tuple assign 2",
+	"print \$i after tuple assign 2", and
+	"print vs2 after tuple assign 2".
+	* lib/gdb.exp (gdb_test): When a gdb aborts, print a more
+	meaningful error message and return -1 so the caller can
+	suppress further tests and avoid a cascade of errors.
+	
+Fri Sep 27 10:34:51 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Tweak tests to account for new
+	format for printing version.
+	* gdb.base/default.exp: Ditto.
+	* gdb.base/interrupt.exp: Fix problem with cascade of
+	errors if child process dies while calling a function.
+	
+Fri Sep 13 21:43:48 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (VPATH): Add
+	* Makefile.in (Makefile, config.status): Fix rules so things get
+	remade when necessary.
+
+Fri Sep 13 18:16:10 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (just-check): Add path to sibling expect dir
+	to environment variable specified by RPATH_ENVVAR.
+
+Fri Sep 13 12:05:34 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (RPATH_ENVVAR): New var, set to @RPATH_ENVVAR@.
+	(just-check): Add shared library paths for libstdc++, tk,
+	tcl, bfd, and opcodes to the environment variable specified
+	in RPATH_ENVVAR.
+	* configure.in: Add support to recognize --enable-shared flag
+	and generate correct value for RPATH_ENVVAR.
+	* configure: Regenerated with autoconf.
+
+Mon Sep  2 06:36:02 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/break.exp: Expand "Delete all breakpoints" xfail to
+ 	include all osf versions.
+	* gdb.threads/pthreads.exp: Expand "run to main" xfail to include
+	all osf versions.  Add -D_MIT_POSIX_THREADS to compilation command
+	when target is linux.  When failing to build pthreads test
+	executable, give more meaningful message.
+	* gdb.threads/pthreads.c: Hpux also uses old definition of second
+	arg for pthread_create.
+	
+Mon Aug 19 09:58:59 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.threads/pthreads.c (PTHREAD_CREATE_ARG2,
+ 	PTHREAD_CREATE_NULL_ARG2): Accomodate old pthreads implementations.
+	* gdb.threads/pthreads.exp: Try linking with both -lpthread (Solaris)
+ 	and -lpthreads (everybody else).
+	(test_startup): Fail gracefully if threads are not supported.
+	* gdb.base/nodebug.exp: Add setup_xfail hppa*-*-hpux* for
+	"p/c array_index("abcdef",2)" when not gcc compiled.
+	* gdb.base/corefile.exp: Add setup_xfail hppa*-*-hpux* for
+	"print func2::coremaker_local" when not gcc compiled.
+	* gdb.base/opaque.exp: Remove setup_xfail hppa*-*-hpux* for
+	"ptype on opaque struct tagname (statically)",
+	"ptype on opaque struct tagname (dynamically) 1", and
+	"ptype on opaque struct tagname (dynamically) 2"
+	for not compiled with gcc.
+	* gdb.base/mips_pro.exp: Only do setup_xfail hppa*-*-* for
+	backtrace when compiled with gcc.
+	* lib/gdb.exp (runto_main): Return result of "runto main" rather 
+	than always return success.
+
+Sat Aug 17 13:28:00 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/virtfunc.exp: Remove setup_xfail for "mips-*-irix5*".
+
+Tue Aug 13 10:26:10 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/structs.exp: Undo last change.
+
+Mon Aug 12 15:29:08 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a1-selftest.exp (do_steps_and_nexts): New routine to
+	encapsulate all the steps/nexts done during self test, starting
+	at main, and makes them less sensitive to optimization issues.
+	Add "hppa*-*-hpux*" to setup_xfail for "backtrace through
+	signal handler" test.
+	* gdb.threads/pthreads.exp: Only run this for native configs.
+	* gdb.base/structs.exp (do_function_calls): Add hppa*-*-hpux9*"
+	setup_xfails for "p fun5()", "p fun6()", "p fun7()", and "p fun8"
+	tests.
+	gdb.c++/virtfunc.exp (do_tests): Add "mips-*-irix5*" setup_xfail
+	for "runto test_calls(void)" test.
+	
+Sun Aug 11 13:11:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/term.exp: Set 7-bit strings, address off, width to 0,
+	and don't expect address info in breakpoint confirmations.
+
+Wed Aug  7 20:47:43 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/list.exp (test_forward_search): Increase timeout
+	temporarily by 60 seconds for searching extremely long line,
+ 	and then reset to old value when done.  Increase expect input
+	buffer to 10000.
+
+Wed Aug  7 15:34:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/list.exp (test_forward_search): Fix to handle very
+	long source line without overflowing expect's input buffer.
+
+Wed Aug  7 12:03:25 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	* config/slite-gdb.exp (gdb_start): Use "full_buffer", not
+	"buffer_full".
+
+	* config/nind-gdb.exp (gdb_start): Use "full_buffer", not
+	"buffer_full".
+
+	* config/mips-gdb.exp (gdb_start): Use "full_buffer", not
+	"buffer_full".
+
+	* lib/gdb.exp (gdb_test): Correct pattern is "full_buffer", not
+	"buffer_full".
+
+Wed Aug  7 11:05:47 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (configdirs): Add gdb.threads.
+	* configure: Regenerated with autoconf.
+	* gdb.threads/{config.in, pthreads.c, pthreads.exp}: New.
+	* gdb.threads/{Makefile.in, configure.in}: Complete rewrites.
+	* gdb.threads/configure: New, generated with autoconf.
+	
+Tue Aug  6 10:23:04 1996  Tom Tromey  <tromey@rtl.cygnus.com>
+
+	* lib/gdb.exp (gdb_test_exact): Turn \n in pattern into \r\n.
+
+Mon Aug  5 18:11:53 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/signals.exp (test_handle_all_print): Test separately for
+	each signal's status in the output of "handle all print".
+	* lib/gdb.exp (gdb_test): Document that the pattern must NOT include
+	the \r\n sequence that immediately precedes the gdb prompt.
+	* gdb.base/a1-selftest.exp: Save original timeout and restore
+	after test.
+
+Sun Aug  4 10:20:50 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/hppa.s: Export fmemLRbug_tests_4 as a ST_CODE
+	symbol.
+
+Fri Aug  2 17:37:26 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* config/vx-gdb.exp (gdb_start): Fix syntax of `$shell_id < 0'.
+
+Thu Jun 27 20:41:40 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/signals.exp (test_handle_all_print): Temporarily increase
+	timeout by 60 seconds.
+
+Thu Jun 27 18:13:57 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/unix-gdb.exp: Increase default timeout from 30 to 60 sec.
+	* config/netware.exp (gdb_run_cmd): Restore old timeout before doing
+	error return.
+
+Thu Jun 27 10:54:58 1996  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp (default_gdb_start): When reporting a timeout during
+	gdb initialization, also report how long dejagnu waited.  Restore
+	old timeout before doing error return.  Temporarily increase timeout
+ 	by 3 minutes to allow for slow startups over heavy NFS use.
+
+Tue Jun 25 19:59:17 1996  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp: Report timeout value for verbosity level 2.
+	* config/gdbserver.exp: Ditto.
+	* config/hppro.exp: Ditto.
+	* config/mips-gdb.exp: Ditto.
+	* config/monitor.exp: Ditto.
+	* config/netware.exp: Ditto.
+	* config/sim-gdb.exp: Ditto.
+	* config/slite-gdb.exp: Ditto.
+	* config/udi-gdb.exp: Ditto.
+	* config/unix-gdb.exp: Ditto.
+	* config/vx-gdb.exp: Ditto.
+	* gdb.base/a1-selftest.exp: Ditto.
+	* gdb.base/a2-run.exp: Ditto.
+	* gdb.base/break.exp: Ditto.
+	* gdb.base/corefile.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/recurse.exp: Ditto.
+	* gdb.base/scope.exp: Ditto.
+	* gdb.base/signals.exp: Ditto.
+
+Tue Jun 25 23:16:58 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
+
+	* gdb.threads/Makefile.in (docdir): Removed.
+
+Tue Jun 25 17:02:39 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
+
+	* configure.in (AC_PREREQ): autoconf 2.5 or higher.
+	* gdb.{base,c++,chill,disasm,stabs}/Makefile.in (VPATH): set to 
+	@srcdir@.
+	* gdb.{base,c++,chill,disasm,stabs}/configure.in (AC_PREREQ): 
+	autoconf 2.5 or higher.
+	* gdb.{base,c++,chill,disasm,stabs}/configure: Rebuilt.
+
+Thu Jun 13 11:16:10 1996  Tom Tromey  <tromey@thepub.cygnus.com>
+
+	* configure: Regenerated.
+	* aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
+	avoid name clashes with SunOS headers.
+
+Wed Jun  5 16:43:27 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.c++/virtfunc.exp: Search $objdir/../../libstdc++ for libstdc++.
+
+Thu May 30 11:35:11 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/callfuncs.exp: Finish last change -- make sure the
+	prototype information ends up in the compiler info file.
+
+Thu May 23 12:48:41 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp: Remove the compiler info file prior to
+	attempting to regenerate it.  Eliminate use of a temporary file
+	and just generate the info file directly.  Source it immediately,
+	for consistency of use.
+	* gdb.base/corefile.exp: Ditto
+	* gdb.base/exprs.exp: Ditto.
+	* gdb.base/funcargs.exp: Ditto.
+	* gdb.base/langs.exp: Ditto.
+	* gdb.base/list.exp: Ditto.
+	* gdb.base/mips_pro.exp: Ditto.
+	* gdb.base/nodebug.exp: Ditto.
+	* gdb.base/opaque.exp: Ditto.
+	* gdb.base/ptype.exp: Ditto.
+	* gdb.base/scope.exp: Ditto.
+	* gdb.base/setvar.exp: Ditto.
+	* gdb.base/signals.exp: Ditto.
+	* gdb.base/whatis.exp: Ditto.
+	* gdb.c++/templates.exp: Ditto.
+	* gdb.c++/virtfunc.exp: Ditto.
+	* gdb.c++/virtfunc.exp: Use contents of gcc_compiled to decide
+ 	whether or not to add -lstdc++ to the compile command line args.
+
+Sat May 18 02:43:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/recurse.exp:  Remove setup_xfail for "sparc*-*-sunos4*",
+	it got fixed by the recent lookup_minimal_symbol_by_pc change.
+	Increase timeout, a lot of single stepping might be needed if the
+	target has no hardware watchpoints.
+
+Wed May 15 08:47:42 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/break.exp: Ignore compiler warnings when compiling
+	break.c.
+	* gdb.base/callfuncs.exp: Don't run these tests on the h8300.
+	* gdb.base/default.exp: Add h8300 xfails.  Handle messages
+	from remote-sim.
+	* gdb.base/exprs.exp: Add h8300 xfails.
+	* gdb.base/funcargs.exp: Likewise.
+	* gdb.base/nodebug.exp: Likewise.
+	* gdb.base/printcmds.exp: Likewise.
+	* gdb.base/ptype.exp: Likewise.
+	* gdb.base/setvar.exp: Handle sizeof (int) != 4 for h8300.  Add
+	h8300 xfails.
+	* gdb.base/return.exp: Handle float/double precision problems 
+	on the h8300.
+	* gdb.base/funcargs.c: Explicitly make last constant argument to
+	call_after_alloca_subr an unsigned long type.
+	* gdb.base/return.c: Include stdio.h.
+
+Tue May  7 22:01:12 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
+
+	* config/abug.exp: New file for the older Motorola Bug monitor
+	that runs on the mvme13x series VME boards.
+	* config/monitor.exp: Use the new config array for target settings
+	if they exist.
+
+Fri May  3 16:02:55 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* sim-gdb.exp: Make the SH simulator allocate less space when
+	it is targeted.
+
+Thu May  2 12:31:56 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/mips_pro.exp: Expect failure for hppa*-*-* in backtrace
+	test.
+
+Wed Mar 20 08:48:03 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/list.exp (test_list_function): Remove setup_xfail for
+	"rs6000-*-*" for "list function in include file" when gcc compiled.
+	* gdb.base/printcmds.exp: Remove setup_xfail for "rs6000-*-aix*"
+	for "p ctable1[120]".
+	* gdb.base/scope.exp: Remove setup_xfail for "rs6000-*-*" for
+	"print 'scope0.c'::filelocal_bss before run" when gcc compiled.
+	Remove setup_xfail for "rs6000-*-*" for
+	"print 'scope0.c'::filelocal before run".
+	* gdb.base/{langs.exp, lists.exp, opaque.exp, scope.exp},
+	gdb.stabs/weird.exp: Remove use of compiler options "-c -o ..."
+	since some compilers don't allow both options to be given
+	on the same command line.  Create object file and move it.
+	
+Tue Mar 19 23:49:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/corefile.exp: Always regenerate the core file, since
+	we always regenerate the coremaker program.  Detect special case
+	where registers cannot be read from core file.
+	
+Tue Mar 19 16:52:49 1996  Fred Fish  <fnf@cygnus.com>
+
+	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* gdb.base/funcargs.c: Patch for SPARCworks alloca compatibility
+	* gdb.c++/templates.exp: Only match on basename of file since
+	some formats like xcoff don't encode directory information.
+	* gdb.stabs/weird.exp: Use the right sed script for powerpc
+	and rs6000 AIX xcoff targets.
+	* configure.in: Add stabsdirs to configdirs for powerpc-*-aix*.
+	* configure: Regenerate.
+	* gdb.base/Makefile.in (clean): Remove generated file twice-tmp.c
+	here, rather than in distclean.
+	
+Sun Mar 17 13:35:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/mips_pro.exp: Create mips_pro.ci to get gcc_compiled
+	defined, and use it to compile the test case with -O2.  The
+	native compilation still uses no optimization.
+	* gdb.base/mips_pro.c: Remove inline assembly code since
+	it is compiled PIC by default, which results in assembler
+	warnings that make the testsuite think the compilation
+	was unsuccessful.
+
+Sat Mar 16 15:02:24 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/misc.exp: Add note to message for
+	"print s.a for foo struct" that this is a known gcc 2.7.2
+	and earlier bug.
+
+Fri Mar 15 17:49:57 1996  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.base/break.exp: Fix pattern for matching "Delete all
+	breakpoints (y or n) ".  Add "mips-dec-ultrix*" to
+	setup_xfail for deleting all breakpoints test.  Fix various
+	timeout messages to include "(timeout)".
+	* gdb.base/callfuncs.exp: Add "i*86-*-sysv4*" to setup_xfail
+	for "p t_float_values2(3.14159,float_val2)".
+	* gdb.base/funcargs.exp: Remove "mips-sgi-irix4*" setup_xfail
+	for "continue to call2g" when gcc compiled.
+	* gdb.base/langs.exp: Remove "i*86-*-sysv4*" setup_xfail for
+	"up to foo in langs.exp", "show language at foo in langs.exp",
+	"show language at cppsub_ in langs.exp", "up to fsub in langs.exp",
+	and "show language at fsub in langs.exp".
+	* gdb.base/list.exp: Remove "*-*-sysv4*" setup_xfail for
+	"list line 1 in include file", "list message for lines past EOF",
+	"list function in include file", "list list0.h:foo", and
+	"list filename:function; nonexistant function".
+	* gdb.base/ptype.exp: Change "i*86-*-sysv4*" setup_xfail for
+	"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
+	and "ptype t_char_array" to be for native cc only.
+	
+Fri Mar 15 16:17:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/corefile.exp: Remove "alpha-dec-osf2*" native compiled 
+	setup_xfail for "print coremaker_bss", "print coremaker_ro",
+ 	"print func2::coremaker_local", and "backtrace in corefile.exp".
+
+Wed Mar 13 14:54:11 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/signals.exp: Remove "alpha-*-osf2*" setup_xfail for
+	"bt in signals.exp".  This problem only appears when running
+	the testsuite, and then only intermittently.
+
+Tue Mar 12 15:00:16 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/return.exp (return_tests): Differentiate between
+	two tests of continuing.
+
+Tue Mar  5 14:33:33 1996  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* */Makefile.in (maintainer-clean): Remove config.log.
+	* gdb.base/Makefile.in (EXECUTABLES): Replace twice with twice-tmp.
+	* gdb.c++/Makefile.in (PROGS): Add inherit.
+	(clean): Remove *.ci.
+
+Tue Feb 20 16:36:10 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/misc.cc: Add test code from Mike Stump.
+	* gdb.c++/misc.exp: Add test to print s.a, for Mike Stump.
+
+Sun Feb 18 11:39:12 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/signals.exp: Change setup_xfail for "alpha-*-osf2"
+	to "alpha-*-osf2*" and add comment.
+	* gdb.base/a1-selftest.exp (test_with_self): Remove "alpha-dec-osf2*"
+ 	setup_xfail for "step over execarg initialization" and
+ 	"step over corearg initialization".
+	* gdb.base/callfuncs.exp (do_function_calls): Restore setup_xfail
+	for "hppa*-*-*", "sparc-*-*", "mips*-*-*", and "alpha-dec-osf2*".
+	* gdb.base/corefile.exp: Add "alpha-dec-osf2*" setup_xfail when not
+ 	gcc compiled for "print coremaker_bss", "print coremaker_ro",
+	"print func2::coremaker_local", and "backtrace in corefile.exp".
+	* gdb.base/signals.exp: Build and source signals.ci.
+	Change "alpha-dec-osf2*" setup_xfail for "bt in signals.exp"
+	to be for gcc only.
+	* lib/gdb.exp: Move verbose statements outside conditionals.
+	
+Sat Feb 17 02:22:14 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/sigall.exp:  Remove setup_xfail for irix4.  Fixed by
+	Feb 3 procfs.c change.
+
+Fri Feb 16 13:25:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/unix-gdb.exp: Remove extraneous newlines from end of file.
+
+Thu Feb 15 08:12:55 1996  Fred Fish  <fnf@cygnus.com>
+
+	* config/unix-gdb.exp: Default timeout in UNIX case to 30 seconds, up
+	from dejagnu's apparent default of 10 seconds, which gives random
+	results when running the tests over NFS on moderately loaded systems.
+	* lib/gdb.exp (gdb_run_cmd): Add "(timeout)" in timeout case.
+
+Mon Feb 12 16:50:28 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp: Remove setup_xfail for PR 5318.  Now fixed.
+	* gdb.base/a2-run.exp: Replace $binfile with $testfile in test
+ 	result reports.
+
+Fri Feb  9 15:56:51 1996  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (CY_AC_PATH_TCLH): Remove.
+	* configure: Regenerate.
+
+Fri Feb  9 08:21:31 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/Makefile.in (clean): Add missing '{'.
+
+Fri Feb  2 10:19:40 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* lib/gdb.exp: Provide a default value for noinferior.
+
+	* lib/gdb.exp: Fix typos (LDLAGS -> LDFLAGS).
+	Load libgloss.exp.
+
+Thu Feb  1 20:20:14 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/hppa.exp: Compile directly into an executable, use
+	the executable, not the .o to run the tests from.
+
+Wed Jan 31 14:21:09 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/break.exp: Don't test for program exit or exit status
+	if $noresults if nonzero.
+	* gdb.base/langs.exp: Likewise.
+	* gdb.base/watchpoint.exp: Likewise.
+
+	* gdb.base/default.exp: Remove extraneous call to load gdb.exp.
+	* gdb.chill/pr-8405.exp: Move skip_chill_tests check to just before
+	trying to compile the testcase.
+
+Wed Jan 24 23:42:39 1996  Doug Evans  <dje@charmed.cygnus.com>
+
+	* gdb.base/interrupt.exp (p func1): xfail sparc64-*-solaris2.
+	* gdb.base/signals.exp (continue to handler): Likewise.
+
+Tue Jan 23 16:28:22 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* gdb.c++/classes.exp:  Now = returns false/true, not 1/0.
+
+	* gdb.fortran/exprs.exp:  .LT. and .GT. now return .TRUE. or .FALSE..
+
+Tue Jan 23 15:41:57 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/corefile.exp: Recognize "not found" as failure
+	when trying to determine if a core file was generated.
+	If no core file was generate the first time, try again without
+	the ulimit -c to work around braindamaged shells.
+
+Mon Jan 15 09:33:00 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.stabs/configure.in (alpha-*-*,mips-*-*): Replace
+	[] tests with "test" and enclose string in quotes.
+	* gdb.stabs/configure: Rebuild
+	
+Thu Jan 11 09:43:14 1996  Tom Tromey  <tromey@creche.cygnus.com>
+
+	Changes in sync with expect:
+	* aclocal.m4 (CY_AC_PATH_TCLH): Handle Tcl 7.5 and greater.
+	(CY_AC_PATH_TCLLIB): Handle Tcl 7.5 and greater.
+	(CY_AC_PATH_TKH): Handle Tk 4.1 and greater.
+	(CY_AC_PATH_TKLIB): Handle Tk 4.1 and greater.  Properly quote
+	argument to AC_REQUIRE.
+	* configure: Regenerated.
+
+Thu Jan  4 08:17:22 1996  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/corefile.exp: When generating a core, discard any
+	error messages about ulimit not found and the "core dumped"
+	message from the shell that runs the coredumper.
+
+Wed Jan  3 01:30:41 1996  Jeffrey A Law  (law@cygnus.com)
+
+	* lib/gdb.exp (skip_chill_tests): Skip them on the PA too.
+
+	* gdb.stabs/weird.exp: Use ${target_triplet} to determine
+	which sed script to run.  Expect failure for v_comb test
+	on PA targets too.
+	
+Sat Dec 30 16:09:04 1995  Fred Fish  <fnf@rtl.cygnus.com>
+
+	* gdb.base/corefile.exp: Remove "i*86-*-linux" xfail for
+ 	"print func2::coremaker_local" and for "backtrace in corefile.exp"
+
+Sat Dec 30 12:59:12 1995  Fred Fish  <fnf@cygnus.com>
+
+	* lib/gdb.exp: Fix typo and rewrite skip_chill_tests.
+	* gdb.stabs/weird.exp: Setup "sparc-sun-sunos4*" and
+ 	"sparc-sun-solaris*" xfails for "p v_comb".
+	* lib/gdb.exp (default_gdb_start): Fix typo.
+	* gdb.base/corefile.exp: Allow "Core was generated by ..."
+	messages to not include the full program name that caused
+	the core dump since some systems (such as solaris) apparently
+	truncate this path to about 80 characters.
+	When generating a core file first try increasing the core file
+	size limit to unlimited since some systems may default it to
+	zero, and it is harmless to try it.  Move the test for failing
+	to generate a core file to where it will actually get executed.
+	* gdb.c++/templates.exp (test_ptype_of_templates): Accept
+	new gdb result from g++ debug info improvements and make old
+	pattern obsolescent.  Also account for size_t differences
+	(may be int or long).
+	* gdb.base/a1-selftest.exp (test_with_self): Check for case where
+	initialization before function call is placed in the delay slot
+	and thus appears to be skipped over by commands such as "next".
+
+Fri Dec 29 16:09:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/a1-selftest.exp (test_with_self): Run without windows.
+
+Wed Dec  6 10:45:42 1995  Jeffrey A. Law  <law@sethra.cygnus.com>
+
+	* gdb.base/*.exp: Make ${srcfile} only be the basename of the
+	input source file; fix code to compile test to deal with this
+	convention.
+	* gdb.c++/*.exp: Likewise.
+
+Mon Nov 27 11:40:16 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/signals.exp: Setup "alpha-*-osf2*" xfail for
+	"bt in signals.exp".
+
+Sat Nov 25 20:52:15 1995  Fred Fish  <fnf@phydeaux.cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Add alpha-dec-osf2 setup_xfail for
+	"step over execarg initialization" and
+ 	"step over corearg initialization".
+
+Sat Nov 25 18:20:14 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/ptype.c (main): Declare malloc as a "char *" for systems
+	with sizeof(pointer) > sizeof(int).  Avoid "void *" or include files.
+
+Sat Nov 25 11:03:42 1995  Fred Fish  <fnf@cygnus.com>
+
+	From Rob Savoye  (rob@poseidon.cygnus.com)
+	* Makefile.in, configure.in, gdb.base/{Makefile.in, configure.in},
+	gdb.c++/{Makefile.in, configure.in}, gdb.chill/{Makefile.in,
+ 	configure.in}, gdb.disasm/{Makefile.in, configure.in},
+ 	gdb.stabs/{Makefile.in, configure.in}, gdb.threads/{Makefile.in,
+ 	configure.in}: Major reworking for autoconfig.
+	* aclocal.m4, configure, gdb.base/configure, gdb.c++/configure,
+	gdb.disasm/configure, gdb.stabs/configure, gdb.stabs/default.mt :
+ 	New files.
+	* config/unix-gdb.exp:  Make GDB global.
+	* gdb.base/{a1-selftest.exp, a2-run.exp,bitfields.exp, break.exp,
+ 	callfuncs.exp, commands.exp, corefile.exp, crossload.exp, exprs.exp,
+ 	funcargs.exp, interrupt.exp, langs.exp, list.exp, mips_pro.exp,
+ 	nodebug.exp, opaque.exp, printcmds.exp, ptype.exp, recurse.exp,
+ 	regs.exp, return.exp, scope.exp, setvar.exp, sigall.exp, signals.exp,
+ 	term.exp, twice.exp, watchpoint.exp, whatis.exp},
+	gdb.c++/{classes.exp, callfuncs.exp, inherit.exp, misc.exp,
+ 	templates.exp, virtfunc.exp}, gdb.chill/{callch.exp, chillvars.exp,
+ 	misc.exp, pr-4975.exp, pr-5016.exp, pr-5020.exp, pr-5022.exp,
+ 	pr-5646.exp, pr-5984.exp, pr-6292.exp, pr-6632.exp, pr-8134.exp,
+ 	pr-8136.exp, result.exp, string.exp, tuples.exp},
+	gdb.disasm/{hppa.exp, sh3.exp}, gdb.stabs/weird.exp: Change continues
+ 	to returns as necessary, arrange for test to compile own testcase
+ 	executable.
+	* lib/gdb.exp: Changes for testsuite to compile own test cases.
+	
+Tue Nov 21 16:15:45 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.c++/classes.exp (test_pointers_to_class_members): Add
+ 	clear_xfail at end of test which might not call either pass or fail.
+	* gdb.base/a1-selftest.exp: Add i*86-*-linuxaout xfail for
+	"backtrace through signal handler".
+
+Sat Nov 18 04:09:31 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/sigall.exp:  Work around OSF/1-3.x kernel bug when
+	continuing from a job control stop signal.
+	* gdb.stabs/alpha.mt:  Use $(CFLAGS) when building weird.o.
+
+Wed Nov 15 00:28:03 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/callfuncs.exp: Remove bogus hppa xfails.
+	* gdb.base/corefile.exp: Likewise.
+	* gdb.base/funcargs.exp: Likewise.
+
+Tue Nov 14 15:18:10 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* config/hmsirom.exp:  Setup for talking to hmsi ROM monitor.
+	* config/monitor.exp:  Add support for setting baud rate.
+
+Sat Nov  4 15:35:52 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Remove i*86-*-sysv4* and
+	i*86-*-linux* xfails for "backtrace through signal handler".
+	* gdb.base/corefile.exp: Add i*86-*-sysv4* xfail for
+	"print func2::coremaker_local".
+	* gdb.base/break.exp: Add i*86-*-sysv4*, sparc-sun-sunos4,
+ 	alpha-dec-osf2* xfail for
+	"delete all breakpoints when none".
+
+Wed Nov  1 15:57:16 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/break.exp: Change test that deletes all breakpoints
+	when no user breakpoints are installed.  A post 4.15 change
+	causes gdb to no longer prompt in this case.
+
+Tue Oct 31 15:13:43 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/return.exp (return_tests):  Change xfail for test
+	"correct value returned double test" to stop xfailing at
+	Solaris 2.5.  Apparently the bug has been fixed.
+
+Sun Oct 29 12:18:16 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.stabs/ecoff.sed: Remove comment lines except for first one.
+	IRIX 4.0 /bin/sed chokes on them, though they work fine elsewhere.
+
+Tue Oct 24 11:12:12 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.disasm/hppa.exp: Test lci and syncdma instructions.
+	* gdb.disasm/hppa.s: Corresponding changes.
+
+Wed Oct 18 11:27:47 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* gdb.base/configure.in (hppa*-*-hpux*): No longer needs target
+	makefile fragment.
+	* config/mt-hpux: Deleted.
+
+Tue Oct 17 23:02:12 1995  Jeffrey A Law  (law@cygnus.com)
+
+	* Many files: When warning about suppressed tests due to a 
+	nonexistant test binary, avoid incrementing the warning count.
+
+Tue Oct 10 11:00:41 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (TARGET_FLAGS_TO_PASS):  Remove BISON.
+	
+Sun Oct  8 04:23:14 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/return.exp:  Change xfail from "sparc-*-solaris2.*" to
+	"sparc-*-solaris2*".
+
+Sat Sep 23 01:22:23 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/coremaker.c:  Produce a full core dump for AIX targets.
+	Add global and local variables and initialize them.
+	* gdb.base/corefile.exp:  Test correct mapping of corefile sections
+	by printing variables. Remove rs6000 and powerpc xfails, BFD now
+	extracts the file name and terminating signal from the core file.
+	* TODO:  Remove note about tests for correct mapping of corefile.
+	* gdb.base/ptype.c (main):  Use boolean2 to inhibit AIX 4.1 xlc
+	from optimizing it away.
+	* gdb.stabs/weird.exp:  Remove rs6000 xfail, xcoffread.c now
+	handles common blocks.
+
+Thu Sep 21 01:28:10 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/sh3.s (fmac): Update for new assembler syntax
+	* gdb.disasm/sh3.exp (fmac): Corresponding changes.
+
+Wed Sep 20 13:15:05 1995  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (maintainer-clean): New target, synonym for
+	realclean.
+	* gdb.base/Makefile.in (maintainer-clean): Likewise.
+	* gdb.c++/Makefile.in (maintainer-clean): Likewise.
+	* gdb.chill/Makefile.in (maintainer-clean): Likewise.
+	* gdb.disasm/Makefile.in (maintainer-clean): Likewise.
+	* gdb.stabs/Makefile.in (maintainer-clean): Likewise.
+	* gdb.threads/Makefile.in (maintainer-clean): Likewise.
+
+Sun Sep 10 13:14:01 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/scope.exp (text_at_main):  Add "hppa*-*-hpux*"
+	xfails when not gcc compiled for "print foo::funclocal".
+	(test_at_foo):  Add "hppa*-*-hpux*" xfails when not gcc compiled for:
+	"print foo::funclocal at foo",
+	"print 'scope1.c'::foo::funclocal at foo",
+	"print foo::funclocal_bss at foo",
+	"print 'scope1.c'::foo::funclocal_bss at foo",
+	"print foo::funclocal_ro at foo",
+	"print 'scope1.c'::foo::funclocal_ro at foo",
+	"print bar::funclocal at foo" and
+	"print 'scope1.c'::bar::funclocal at foo".
+	(test_at_bar):  Add "hppa*-*-hpux*" xfails when not
+	gcc compiled for "print foo::funclocal at bar".
+	Expand all messages to ensure that they identify that
+	the test is at bar().
+	* gdb.base/opaque.exp: Add "hppa*-*-hpux*" xfails when not
+	gcc compiled for:
+	"ptype on opaque struct pointer (statically)",
+	"ptype on opaque struct tagname (statically)",
+	"ptype on opaque struct pointer (dynamically) 1",
+	"ptype on opaque struct tagname (dynamically) 1",
+	"ptype on opaque struct pointer (dynamically) 2" and
+	"ptype on opaque struct tagname (dynamically) 2
+	* gdb.base/nodebug.exp: Add "hppa*-*-hpux*" xfails when not
+	gcc compiled for:
+	"p datalocal"
+	"whatis datalocal",
+	"ptype datalocal",
+	"p bsslocal",
+	"whatis bsslocal", and
+	"ptype bsslocal".
+	* gdb.base/langs.exp: Add "hppa*-*-hpux*" xfails for
+	"backtrace in langs.exp" and "up to langs0__2do in langs.exp"
+	when not gcc compiled.
+	* gdb.base/funcargs.exp (float_and_integral_args):  Add
+	"hppa*-*-hpux*" xfail for "run to call2a" when not gcc
+	compiled.
+	(discard_and_shuffle):  Add "hppa*-*-hpux*" xfail for
+	"backtrace from call6a" when not gcc compiled.
+	(shuffle_round_robin): Add "hppa*-*-hpux*" xfail for
+	"backtrace from call7a" when not gcc compiled.
+	* gdb.base/callfuncs.exp (do_function_calls):
+	Add "hppa*-*-hpux*" xfail when not gcc compiled for
+	"p t_char_array_values(char_array_val2,char_array_val1)",
+	"p t_char_array_values(char_array_val1,char_array_val2)",
+	"p t_char_array_values("carray 1","carray 2")",
+	"p t_char_array_values("carray 1",char_array_val2)",
+	"p t_char_array_values(char_array_val1,"carray 2")",
+	"p sum_args(1,{2})",
+	"p sum_args(2,{2,3})",
+	"p sum_args(3,{2,3,4})",
+	"p sum_args(4,{2,3,4,5})"
+	* gdb.base/corefile.exp: Add "hppa*-*-hpux*" xfail for
+	"backtrace in corefile.exp" when not gcc compiled.
+
+Sat Sep  9 01:35:39 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/signals.exp:  Rewrite `handle all print' test as
+	a procedure. Accept blanks or TABs as whitespace, increase
+	timeout and expect input buffer size for the large output
+	from the command. Remove "i*86-*-bsdi2.0" xfail.
+
+Sat Sep  2 06:41:26 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/setvar.exp:  Add new testcases for truncation when
+	assigning invalid values to bitfields.
+
+Sat Sep  2 00:17:31 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp (do_function_calls):  Remove 
+	mips-sgi-irix* xfail for
+	"call inferior func with struct - returns char *"
+	and fix test so that an optional (unsigned char *) cast is
+ 	accepted in the result.
+
+Fri Sep  1 13:42:01 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/funcargs.exp (float_and_integral_args):  Remove
+	sparc-sun-solaris2* xfail for "print f1 after run to call2a".
+	* gdb.c++/Makefile.in (SUFFIXES): Add .SUFFIXES and ".cc" suffix.
+	* gdb.base/signals.exp: Remove duplicate "handle all print" test
+	that accidentally got checked in.
+
+Sun Aug 27 23:35:35 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp (do_function_calls):  Add alpha-dec-osf2* 
+	clear_xfail for "p t_float_values2(3.14159,float_val2)" for gcc
+	compiled test.
+	* gdb.base/opaque.exp (setup_xfail_on_opaque_pointer):
+	Add mips-sgi-irix5* xfail for not gcc compiled.
+	* gdb.base/Makefile.in (nodebug.o):  Also create nodebug.ci.
+	* gdb.base/nodebug.exp: Add mips-sgi-irix5 xfail when not gcc compiled for
+	"p top", "whatis top", "p middle", and "whatis middle".
+	* gdb.base/whatis.exp: Add mips-sgi-irix* xfail for
+	"whatis signed char" for not gcc compiled.
+	* gdb.base/setvar.exp: Add mips-sgi-irix4* xfail (works on irix5) for
+	"set variable signed char=-1 (-1)" and
+	"set variable signed char=0xFF (0xFF)" for not gcc compiled.
+	* gdb.base/funcargs.exp (float_and_integral_args):
+	Add mips-sgi-irix5* xfail for "run to call2a" for not gcc compiled.
+	Add mips-sgi-irix* xfail when not gcc compiled for
+	"continue to call2b".
+	Add mips-sgi-irix4* xfail (works with irix5) when gcc compiled for
+	"continue to call2g".
+	(discard_and_shuffle): Add mips-sgi-irix5* xfail whn not gcc compiled for
+	"backtrace from call6a"
+	(shuffle_round_robin): Add mips-sgi-irix* xfail when not gcc compiled for
+	"backtrace from call7k".
+	Add mips-sgi-irix5* xfail when not gcc compiled for
+	"backtrace from call7a".
+	(localvars_after_alloca):  Fix gdb_test cmds for
+	"print * after runto ...".
+	Remove rs6000-*-* xfails for
+	"print i after runto localvars_after_alloca" and
+	"print l after runto localvars_after_alloca"
+	for all compilers.
+	* gdb.base/exprs.exp: Add mips-sgi-irix4* xfails (works with irix5),
+ 	when not compiled with gcc, for:
+	"print signed char == (minus)",
+	"print signed char != (minus)",
+	"print signed char < (minus)",
+	"print signed char > (minus)".
+	* gdb.base/callfuncs.exp (do_function_calls):
+	Add mips-sgi-irix* xfail, when compiled with native compiler, for
+	"call inferior func with struct - returns char *".
+	* gdb.base/return.exp (return_tests): Change xfail for 
+	"correct value returned double test" to include Solaris 2.4.
+	* gdb.base/funcargs.exp (float_and_integral_args):
+	Add sparc-sun-solaris2* xfail for "print f1 after run to call2a".
+	
+Sat Aug 26 00:26:11 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/setvar.c, gdb.base/setvar.exp:  Add new tests for
+	enumeration bitfields if compiling with GNU C.
+	* lib/gdb.exp:  Consume `(y or n) ' in `Reinitialize source path
+	to empty' prompt.
+
+Tue Aug 22 00:30:37 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/scope.exp: xfail 'scope0.c'::filelocal_bss before run
+	test for PRO targets.
+
+	* gdb.base/funcargs.exp: Avoid ever setting more than 8
+	breakpoints in the inferior at any given time by making
+	two groups of breakpoints for call2*, call6* and call7*
+	tests.
+
+Sun Aug 20 06:58:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/funcargs.exp:  Fix typos introduced by Aug 15 change.
+	* gdb.base/callfuncs.c (main):  Use struct_val1 to inhibit xlc
+	from optimizing it away.
+	* gdb.base/callfuncs.exp:  Remove rs6000-*-* xfails for
+	"call inferior func with struct".
+
+Wed Aug 16 11:57:15 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.in: Only configure gdb.chill for particular targets.
+
+Tue Aug 15 09:42:44 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/Makefile.in:  Add action to .c.o transformation
+	rule that generates a .ci file for each .o file and remove
+	explicit .c.o rules except for callfuncs.o.
+	* gdb.c++/Makefile.in:  Add .cc.o transformation rule that
+	generates a .ci file for each .o file and remove explicit
+	.cc.o rules.
+	(clean): Remove *.tmp *.ci files.
+	(EXECUTABLES): Remove templ-info.exp.
+	* gdb.base/compiler.c: New file.
+	* gdb.c++/compiler.cc: New file
+	* gdb.base/scope.exp: Source gdb.base/scope.ci.
+	Change rs6000-*-* xfail for
+	"print 'scope0.c'::filelocal_ro" and
+	"print 'scope1.c'::filelocal" and
+	"print 'scope1.c'::filelocal_bss" and
+	"print 'scope1.c'::filelocal_ro" and
+	"print 'scope1.c'::foo::funclocal" and
+	"print 'scope1.c'::foo::funclocal_ro" and
+	"print 'scope1.c'::bar::funclocal" and
+	"print 'scope0.c'::filelocal_ro" and
+	"print 'scope1.c'::filelocal at foo" and
+	"print 'scope1.c'::filelocal_bss at foo" and
+	"print 'scope1.c'::filelocal_ro at foo" and
+	"print 'scope1.c'::foo::funclocal at foo" and
+	"print 'scope1.c'::foo::funclocal_bss at foo" and
+	"print 'scope1.c'::foo::funclocal_ro at foo" and
+	"print 'scope1.c'::bar::funclocal at foo" and
+	"print 'scope0.c'::filelocal_ro" and
+	"print 'scope1.c'::filelocal" and
+	"print 'scope1.c'::filelocal_bss" and
+	"print 'scope1.c'::filelocal_ro" and
+	"print 'scope1.c'::foo::funclocal" and
+	"print 'scope1.c'::foo::funclocal_bss" and
+	"print 'scope1.c'::foo::funclocal_ro" and
+	"print 'scope1.c'::bar::funclocal" and
+	"print 'scope1.c'::bar::funclocal_bss"
+	to only be xfail'd when not compiled with gcc.
+	Add rs6000-*-* xfail for 
+	"print 'scope0.c'::filelocal_bss before run"
+	when compiled with gcc.
+	(test_at_main): Add rs6000-*-* xfail for
+	"print filelocal_ro in test_at_main"
+	when compiled with gcc.
+	* gdb.base/ptype.exp: Source gdb.base/ptype.ci.
+ 	Add rs6000-*-aix* xfail for 
+	"whatis unnamed typedef'd enum (compiler bug in IBM's xlc)" and
+	"ptype t_char_array",  not compiled with gcc.
+	* gdb.base/list.exp (test_list_function):  Add rs6000-*-*
+	xfail for "list foo (in include file)" when gcc	compiled.
+	* gdb.base/funcargs.exp: Source gdb.base/funcargs.ci
+ 	(integral_args): Add rs6000-*-* xfail for
+	"run to call0a" if not compiled with gcc.
+	(unsigned_integral_args): Add rs6000-*-* xfail for
+	"run to call1a" if not compiled with gcc.
+	(float_and_integral_args):  Add rs6000-*-* xfail for
+	"run to call2a" if not compiled with gcc and for
+	"continue to call2b" for any compiler.
+	Add rs6000-*-* xfail to
+	"print f1 after run to call2a" for gcc compiled.
+	(discard_and_shuffle): Add rs6000-*-* xfail for
+	"run to call6a".
+	(shuffle_round_robin): Add rs6000-*-* xfail for
+	"backtrace from call7a" if not compiled with gcc.
+	Add rs6000-*-* xfail for
+	"backtrace from call7b" if compiled with gcc.
+	(call_after_alloca): Add rs6000-*-* xfail for
+	"print c in call_after_alloca" and
+	"print s in call_after_alloca" and
+	"backtrace from call_after_alloca_subr"
+	if not compiled with gcc.
+	(localvars_in_indirect_call): Add rs6000-*-* xfail for
+	"print c in localvars_in_indirect_call" and
+	"print c in localvars_in_indirect_call" and
+	"backtrace in indirectly called function" and
+	"stepping into indirectly called function"
+	if not compiled with gcc.
+	(localvars_after_alloca): Add rs6000-*-* xfail for
+	"print c after runto localvars_after_alloca" and
+	"print s after runto localvars_after_alloca" and
+	"print i after runto localvars_after_alloca" and
+	"print l after runto localvars_after_alloca"
+	for all compilers.
+	* gdb.base/whatis.exp: Source gdb.base/whatis.ci rather
+	than whatis-info.exp.
+	* gdb.base/opaque.exp: Source gdb.base/opaque0.ci rather
+	than opaque-info.exp.
+	Setup rs6000-*-* xfail for
+	"ptype on opaque struct pointer (statically)" and 
+	"ptype on opaque struct pointer (dynamically)" when
+	not compiled with gcc.
+	* gdb.base/callfuncs.exp: Source gdb.base/callfuncs.ci
+	rather than callf-info.exp.
+	(do_function_calls):  Add clear_xfail for rs6000-*-* for
+	"p t_float_values2(3.14159,float_val2)".  Seems to work
+	fine there, both with xlc and gcc.  Need to find out what
+	it is doing right and fix other platforms.
+	* gdb.base/callfuncs.exp: Add rs6000-*-* xfail for
+	"call inferior func with struct - returns int",
+	"call inferior func with struct - returns long",
+	"call inferior func with struct - returns float",
+	"call inferior func with struct - returns double",
+	"call inferior func with struct - returns char *",
+	but only if not gcc compiled (presumes xlc compiled).
+	Change rs6000-*-* xfails for
+	"call inferior func with struct - returns char" and
+	" call inferior func with struct -  returns short" to only
+	xfail if not using gcc.
+	(clean mostlyclean):  Remove *.ci and *.tmp files.
+	* gdb.c++/templates.exp: Source gdb.c++/templates.ci rather
+	than templ-info.exp.
+	* gdb.base/langs.exp:  Source gdb.base/langs.ci.
+	Add rs6000-*-* xfail for "up to foo in langs.exp"
+	"up to cppsub_ in langs.exp" and "up to fsub in langs.exp"
+ 	when not gcc compiled.
+	
+Sat Aug 12 15:05:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* gdb.base/callfuncs.exp: Add xfails for the powerpc.
+	* gdb.base/corefile.exp: Likewise.
+	* gdb.base/list.exp: Likewise.
+	* gdb.base/scope.exp: Likewise.
+	* gdb.base/siganls.exp: Likewise.
+
+	* gdb.base/nodebug.exp: Add xfails for the powerpc.  Handle aix4
+	compiler output.
+	* gdb.base/whatis.exp: Likewise.
+
+Fri Aug 11 13:36:20 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/sh3.exp (all_fp_misc_tests): No longer expect a
+	failure (opcode table has been fixed to match reality).
+
+Mon Aug 14 09:01:59 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp: Add rs6000-*-* xfails for
+	"call inferior func with struct - returns char",
+	"call inferior func with struct - returns short"
+
+	* gdb.base/scope.exp: Remove rs6000-*-* xfails for
+	"print 'scope0.c'::filelocal at main",
+	"print 'scope0.c'::filelocal_bss in test_at_main",
+	"print 'scope0.c'::filelocal at foo",
+	"print 'scope0.c'::filelocal_bss in test_at_foo",
+	"print 'scope0.c'::filelocal at bar",
+	"print 'scope0.c'::filelocal_bss in test_at_bar"
+	
+	* gdb.base/list.exp: Remove rs6000-*-* xfail for "list function
+	in source file 1".  This bug seems to have been fixed with both
+	gcc and native cc (was native assembler bug?).
+
+Wed Aug  9 08:04:12 1995  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.base/a1-selftest.exp: Change "i*86-*-sysv4" xfail for
+	"backtrace through signal handler" to "i*86-*-sysv4*".
+	* gdb.base/signals.exp: Add xfail for "'next' behaved as
+	continue" case.  Add "known SVR4 bug" to fail message.
+	Add "i*86-*-bsdi2.0" xfail for "handle all print".
+	Add "i*86-*-bsdi2.0" xfail for "backtrace in signals_tests_1".
+	* gdb.base/ptype.exp: Add "i*86-*-sysv4*" xfail for
+	"whatis unnamed typedef'd enum..." and "ptype t_char_array".
+	* gdb.base/langs.exp: Add "i*86-*-sysv4*" xfail for
+	"up to foo in langs.exp", "show language at foo in
+	langs.exp", "up to cppsub_ in langs.exp", "show
+	language at cppsub_ in langs.exp", "up to fsub in
+	langs.exp", and "show language at fsub in langs.exp".
+	* gdb.base/corefile.exp: Add "i*86-*-sysv4*" to xfail for
+	"bactrace in corefile.exp".
+	* gdb.base/callfuncs.exp: Change xfail to "i*86-*-*" for
+	"call inferior function with struct - returns float" and
+	"call inferior function with struct - returns double".
+	
+Mon Aug  7 02:43:28 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/sh3.s: Source for sh3 disassembler tests.
+	* gdb.disasm/sh3.exp: Run the sh3 disassembler tests.
+	* gdb.disasm/configure.in (sh-*-*): Use sh3.mt makefile fragment.
+	* gdb.disasm/sh3.mt: Makefile fragment for sh3 ests.
+
+Mon Aug  7 08:09:37 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (CHILL_FOR_TARGET): Use previously defined
+	(or overriden) "CHILL" macro rather then bare "gcc".
+	Also look for ../../gcc/xgcc since that is what we will
+	actually need, not "Makefile".  Remove following assignment
+	of CHILL to CHILL_FOR_TARGET because that results in
+	recursive definition.
+
+Sun Aug  6 16:52:29 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/corefile.exp:  Change xfail for backtrace in
+	corefile.exp from linuxaout to all linux.
+	* gdb.base/sigall.exp (test_one_sig):  Specifically deal with
+	cases where we miss the breakpoint at the signal handler
+	for some reason.  Setup xfail for linuxoldld/linuxaout and
+	getting SIGIO.  Setup xfail for linuxoldld/linuxaout for
+	hitting SIGURG breakpoint.
+	* gdb.base/signals.exp:  Setup xfail for "next" acting like
+	continue to add linuxoldld.  Setup xfail for all linux for
+	"next to handler in signals_tests_1", "backtrace in
+	signals_tests_1", "continue to func1", "pass SIGUSR1",
+	and continue to handler".
+
+Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Update all FSF addresses except those in COPYING* files.
+
+Sun Jul 30 17:50:35 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/a2-run.exp: Change messages to be more explicit about
+	the status of args, and quote binfile in results.
+
+Sun Jul 30 10:24:20 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/callfuncs.exp: Add tests for passing structs to
+	inferior functions and return various types.
+	* gdb.base/callfuncs.c: Add functions to receive a struct
+	and return a member of the struct, in various types.
+
+Sat Jul 29 14:22:33 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/Makefile.in (clean):  Remove callf-info.exp.
+
+Fri Jul 28 13:36:11 1995  Brendan Kehoe  <brendan@lisa.cygnus.com>
+
+	* config/vxworks29k.exp: New file, sources vxworks.exp.
+
+Fri Jul 28 00:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* config/gdbremote.exp: New file.  Testing framework using
+	gdbserver.
+
+Thu Jul 27 12:17:14 1995  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.base/interrupt.exp: Setup "i*86-*-linux" xfail for
+	"call function when asleep" and "send end of file".
+	* gdb.base/corefile.exp: Add "i*86-*-linuxaout" to xfail list
+	for "backtrace in corefile.exp".
+	* gdb.base/a1-selftest.exp: Add "i*86-*-linux*" to xfail list
+	for "backtrace through signal handler".
+	* gdb.base/corefile.exp: Make sure we actually generate a core file
+	before trying the core tests.  Some systems allow the user to suppress
+	generation of core files and default to that (linux for example).
+	* gdb.base/signals.exp: Change xfail for "next" acting like "continue"
+	from "i*86-*-linux" to "i*86-*-linuxaout".  Works with ELF beta.
+
+Tue Jul 25 17:30:10 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* gdb.threads: New directory with some crude multi-threaded
+	gdb tests (step.exp and step2.exp).
+	* config/mt-lynx (STEP_EXECUTABLE): Define.
+	(THREADFLAGS): Define.
+
+Tue Jul 25 01:03:52 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/sigall.exp: Avoid losing in SIGPRIO test on lynx.
+
+	* gdb.base/signals.exp: Disable whole file for lynx until
+	further notice.
+
+	* gdb.base/signals.exp: xfail test where "next" acts like
+	"continue" for lynx.
+
+	* gdb.base/interrupt.exp: xfail test for calling function while
+	inferior is asleep for lynx.
+
+	* gdb.base/watchpoint.exp: Handle more cases of gdb echoing more
+	than one cr-lf	after each command.
+
+Sun Jul 23 23:33:18 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* configure.in:  Reinstate setting of stabsdirs variable, fix
+	typo in setting up configdirs for native builds.
+
+	* gdb.base/return.exp:  Fix typo in return double test.
+	* gdb.base/return.c (tmp2, tmp3):  Made global to inhibit the
+	compiler from optimizing them away.
+
+Fri Jul 21 11:39:34 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/gdbvars.exp: Expect zero or more additional cr-lf
+	sequences to be echo'd by gdb when using gdb_test.
+	* gdb.chill/chexp.exp: Likewise.
+	* gdb.fortran/exprs.exp: Likewise
+
+Thu Jul 20 13:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Reset the timeout value to 30 seconds
+	after the inferior gdb has started.
+
+	* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
+	after each command.
+	* gdb.base/funcargs.exp: Likewise.
+	* gdb.base/gdbvars.exp: Likewise.
+	* gdb.base/interrupt.exp: Likewise.
+	* gdb.base/list.exp: Likewise.
+	* gdb.base/watchpoint.exp: Likewise.
+	* gdb.c++/demangle.exp: Likewise.
+	* gdb.c++/inherit.exp: Likewise.
+	* gdb.chill/chexp.exp: Likewise.
+	* gdb.fortran/exprs.exp: Likewise.
+
+	* gdb.base/watchpoint.exp: Disable watchpoint triggered in syscall
+	test if we can't handle IO to/from the inferior.
+
+	* gdb.c++/misc.exp: Always check for a program already being
+	started after sending a "run" command to gdb.
+
+	* gdb.base/twice.exp: Start with a fresh gdb.
+
+	* gdb.chill/chexp.exp: Remove skip_chill_tests check; these tests
+	only depend on gdb's expression code, not the chill runtime.
+
+	* gdb.base/return.c: Put return values into variables so we
+	can have gdb print them rather than depending on the program
+	to print them.
+	* gdb.base/return.exp: Corresponding changes.
+
+	* lib/gdb.exp: Provide default value for noinferiorio.
+	* gdb.base/interrupt.exp: Skip tests if we can't handle IO to/from
+	the inferior.
+
+	* gdb.base/break.exp: Always check for a program already being
+	started after sending a "run" command to gdb.
+	(text_next_with_recursion): Don't check the output from the
+	program's printf statement.  Instead just make sure the program
+	exited.
+
+	* gdb.base/commands.exp: Protect tests which need arguments with
+	$noargs conditionals.
+
+Wed Jul 19 22:42:43 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/printcmds.exp:  Adjust expect patterns for addresses
+	of structure member arrays to match gdb/valops.c:value_addr change.
+
+Mon Jul 17 10:12:27 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/a1-selftest.exp: Fix unmatched quotes in many timeout
+	cases.
+
+Wed Jul 12 10:20:08 1995  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in (configdirs):  Remove gdb.chill from default list
+	of subdirs and then add it back in only if doing a native build.
+	The current chill compiler does not yet work in any cross build.
+	* Revert all signal changes from Jul 6.
+	* gdb.base/{sigall.c signals.c}:  Define away signal() and alarm()
+	for sh-hms targets, allowing these tests to link, with no other
+	changes.  Testing is suppressed by setting "nosignals" in site.exp.
+
+Thu Jul  6 20:58:30 1995  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in (signaldirs): Define and add to configdirs for all
+	targets except some specific ones that are known to not support signals.
+	Also clean up formatting.
+	* gdb.base/Makefile.in (EXECUTABLES):  Remove sigall and signals.
+	(signals, sigall):  Remove rules to build.
+	* gdb.base/{sigall.c, sigall.exp, signals.c, signals.exp}:
+	Moved to new gdb.signals directory.
+	* gdb.signals: New test directory.
+	* gdb.signals/{Makefile.in, configure.in, sigall.c, sigall.exp,
+	signals.c signals.exp}:  New or moved files.
+
+Sun Jun 25 12:55:18 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/interrupt.exp: Don't choke if $nointerrupts doesn't exist.
+
+Wed Jun 21 16:35:55 1995  Fred Fish  <fnf@cygnus.com>
+
+	* gdb.base/return.exp:  Xfail `return double' test failure
+	on at least Solaris 2.3 and handle future/past versions on
+	a case by case basis as appropriate.  Also update message
+	to include i*86 failures.
+
+Wed May 24 07:10:10 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in: Change variable CFLAGS to TESTSUITE_CFLAGS.
+
+	* lib/gdb.exp: Fix comment which erroneously identified
+	gdb_file_cmd as gdb_load (the 19 May change was in fact to
+	gdb_file_cmd not gdb_load).
+	* config/unix-gdb.exp (gdb_load): Add "upvar timeout timeout".
+
+	* gdb.base/setvar.exp: Make test names consistent between pass and
+	fail cases.  Use gdb_test more.
+
+Fri May 19 07:22:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp (gdb_load): Add "upvar timeout timeout".
+
+Mon May 15 23:50:51 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/help.exp:  Fix expected help string for `show commands'.
+
+Thu May 11 07:55:11 1995  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdb.stabs/xcoff.sed: Change N_LSYM to C_DECL not C_LSYM.
+
+	* gdb.stabs/weird.exp: Remove xfail for xcoff bitching about lack
+	of a text section.
+
+Thu May 11 15:02:24 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* config/monitor.exp (gdb_target_monitor):  Fix loop interator so
+	that loop eventually terminates.  Fix Connection refused logic so
+	that testsuite will expire nicely.
+
+Wed May 10 17:57:35 1995  Stu Grossman  (grossman@andros.cygnus.com)
+
+	* config/cpu32bug.exp, config/est.exp, config/hppro.exp,
+	config/rom68k.exp:  New tcl glue for the appropriate monitors.
+	These all just end up calling monitor.exp.
+	* config/monitor.exp (gdb_target_monitor):  Handle `Connection
+	refused' by retrying.  Cleanup some timeout issues.
+	* (gdb_load):  Reduce timeout.  Cleanup some timeout issues.
+	* lib/gdb.exp (gdb_test gdb_test_exact):  Upvar timeout so that
+	callers don't have to set/restore global timeout variable.
+
+	* The following set of changes centralizes management of the global
+	timeout	variable.  This way, it can be set in one target dependent
+	place instead of dozens of places scattered throughout the test suite.
+	If you need to lengthen a timeout, then you should either set timeout
+	in one of the config/{target}.exp files, or multiply it by a factor.
+	Setting it to an absolute value is always going to lose for some
+	targets.
+	* gdb.base/a1-selftest.exp (test_with_self):  Only use local timeout.
+	* gdb.base/callfuncs.exp (do_function_calls):  Don't set timeout.
+	* gdb.base/funcargs.exp:  Don't set timeout.
+	* gdb.base/list.exp (test_forward_search):  Only use local timeout.
+	* gdb.base/printcmds.exp (test_print_string_constants
+	test_print_array_constants):  Don't set timeout.
+	* gdb.base/ptype.exp:  Don't set timeout.
+	* gdb.base/recurse.exp:  Don't set timeout.
+	* gdb.base/return.exp:  Don't set timeout.
+	* gdb.base/watchpoint.exp:  Don't set timeout.
+	* gdb.c++/classes.exp (do_tests):  Don't set timeout.
+	* gdb.c++/virtfunc.exp (test_virtual_calls):  Don't set timeout.
+
+Wed May 10 16:03:23 1995  Torbjorn Granlund  <tege@adder.cygnus.com>
+
+	* Makefile.in: Make clean targets work also when SUBDIRS is empty.
+
+Mon May  1 07:32:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp: Disable chill tests for irix5.
+
+Wed Apr 26 07:36:03 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/scope.exp: Make test names unique.  Use gdb_test.  Make
+	each test pass or fail.
+
+Sun Apr 23 21:32:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/opaque.exp: Remove xfails for aix; print a warning if
+	xlc not gcc.
+
+Fri Apr 21 15:44:02 1995  Stu Grossman  (grossman@rtl.cygnus.com)
+
+	* cpu32bug.exp est.exp rom68k.exp:  Delete.  Unify into monitor.exp.
+
+Wed Apr 19 17:41:21 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* config/est.exp:  Fix copyright and comments.  Remove dead code.
+	Use targetname, serialport and baud variables instead of fixed
+	constants.
+	* config/rom68k.exp:  Fix copyright and comments.  Remove dead code.
+	* config/cpu32bug.exp:  New file to support cpu32bug monitors.
+
+Wed Apr 19 13:47:16 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/watchpoint.exp: Don't run
+	test_watchpoint_triggered_in_syscall for sunos.
+
+Mon Apr 17 12:48:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/{break.c,run.c}: Don't include vxWorks.h or stdioLib.h;
+	they don't seem to exist.  Do include stdio.h.
+
+Fri Apr 14 09:40:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/a1-selftest.exp: Add alpha xfail.
+
+Mon Apr 10 13:07:50 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/watchpoint.c (main): Prompt before calling read().
+	* gdb.base/watchpoint.exp (test_watchpoint_triggered_in_syscall):
+	Revise accordingly.  Remove cruft about sending "123" several
+	times, until it gets noticed.  Clean up the "print buf[0]" stuff
+	so that it passes or fails, and waits for prompts in the usual way.
+
+Sun Apr  9 09:02:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/recurse.exp: Fix comment.
+
+	* TODO: Remove item about printing variables in nodebug.exp.  Add
+	item about enabling tests which are only run on some targets.
+
+	* gdb.base/watchpoint.exp: Various cleanups (make each test pass or
+	fail, make test names unique, use new gdb_test convention
+	regarding pattern, use gdb_test more, etc.).
+
+	* gdb.base/bitfields.exp: Various cleanups (make each test pass or
+	fail, make test names unique, etc.).
+
+Sat Apr  8 02:47:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/nodebug.c:  Change return type of top and middle to
+	short.
+	* gdb.base/nodebug.exp:  Remove xfails for ecoff systems, they
+	are fixed by the recent mdebugread.c changes. Allow `short ()'
+	as type for top and middle.
+
+Thu Apr  6 08:54:18 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/break.exp: Remove commented out if $usestubs {}.  As
+	nearly as I can tell, the whole thing was an accident in Stu's
+	change of 24 Mar 1995 (logged in ../ChangeLog), in which he meant
+	to replace a send/expect pair with gdb_test, but ended up only
+	adding the gdb_test.  My change of 24 Mar 1995 and Kung's change
+	of 30 Mar 1995 took care of it, but left this vestigial comment
+	which I am now nuking.
+
+Mon Apr  3 09:00:27 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/break.exp: Look for different line number for
+	breakpoint at main depending on usestubs.
+
+Sun Apr  2 08:15:45 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/list.exp:  Adjust some alternate expect patterns to
+	match recent list0.c change. Add alternate expect pattern for
+	output from `list default lines around main' for optimizing
+	compilers.
+
+Sat Apr  1 07:23:22 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp: If nosignals is not set, set it to 0.
+
+Fri Mar 31 16:13:48 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/slite-gdb.exp: Responds to load symbol table prompt.
+	* gdb.base/break.exp: Adjust line number, fix rerun.
+	* gdb.base/langs0.c: Add #ifdef usestubs.
+
+Thu Mar 30 15:36:55 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* gdb.base/list.exp: Adjust line contents after adding new lines in
+	list0.c. Also fix a syntax error.
+
+	* lib/gdb.exp (gdb_run_cmd): Special handling for targets use stubs.
+	* gdb.base/break.exp: ditto.
+	* gdb.base/list.exp: ditto.
+	* gdb.base/bitfields.c: Add #ifdef usestubs in main().
+	* gdb.base/run.c: ditto.
+	* gdb.base/list0.c: ditto.
+	* gdb.base/funcargs.c: ditto.
+
+Wed Mar 29 17:09:29 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* testsuite/config/rom68k.exp (gdb_target_rom68k):  Use
+	$targetname, $serialport and $baud instead of hardwired variables.
+	* testsuite/gdb.base/{sigall.exp signals.exp}:  Skip these if the
+	target doesn't support signals.
+
+Wed Mar 29 12:29:34 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* lib/gdb.exp (runto_main): Fix regular expression bug, add return 1.
+
+Tue Mar 28 08:46:45 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/recurse.exp: Make test names unique.  Change \\(+ to \\(.
+	Don't rely on the value of an auto variable before it has been
+	initialized.  Use gdb_test more.
+
+Mon Mar 27 08:00:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp (default_gdb_version): A version number must start
+	with a digit, but other than that contains all characters up to
+	the first whitespace character.
+
+Sun Mar 26 13:19:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/commands.exp (breakpoint_command_test): New tests.
+
+Sat Mar 25 15:38:06 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.c++/*.exp: Warn if executable does not exist.  The original
+	reason for skipping the warning was that configure.in sometimes
+	intentionally skipped building the executables but the tcl code
+	had no way of knowing.  That (a) was always bogus with respect to
+	error handling, (b) is no longer true (right now there is no way
+	to skip C++ tests).
+
+	* gdb.c++/demangle.exp: Remove unused binfile and srcfile variables.
+
+Sat Mar 25 01:16:10 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/list.exp:  Add expect patterns for output from
+	SunPRO compiled executables.
+	* gdb.base/whatis.exp:  Allow leading `signed' for all v_signed_*
+	types.
+
+Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/break.exp (test_next_with_recursion): Accept any line
+	number (we are already testing that the correct source line text
+	gets printed).
+
+	* gdb.base/break.exp: Make one test if $usestubs.  I'm not sure
+	that is what is intended, but something needed to be done to get
+	sunos4 native working again.
+
+	* gdb.c++/misc.cc (main): Fix typo (#iffef -> #ifdef).
+
+	* gdb.base/a1-selftest.exp (test_with_self): Remove comment which
+	apparently went with a (very) old xfail.
+
+Fri Mar 24 13:41:09 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* gdb.base/callfuncs.exp: call runto_main instead of runto main.
+	runto_main is a proc in gdb.exp that will do 'step' for target use
+	stubs.
+	* gdb.base/exprs.exp: ditto.
+	* gdb.base/interrupt.exp: ditto.
+	* gdb.base/opaque.exp: ditto.
+	* gdb.base/printcmds.exp: ditto.
+	* gdb.base/ptype.exp: ditto.
+	* gdb.base/scope.exp: ditto.
+	* gdb.base/setvar.exp: ditto.
+	* gdb.base/signals.exp: ditto.
+	* gdb.base/twice.exp: ditto.
+	* gdb.c++/classes.exp: ditto.
+	* gdb.c++/inherit.exp: ditto.
+	* gdb.c++/templates.exp: ditto.
+	* gdb.base/break.exp: no run and hit main for stubs. Change line
+	numbers for breakpoints and info breakpoint.
+	* gdb.base/break.c: Add #ifdef usestubs for set_debug_traps() and
+	breakpoint().
+	* gdb.base/callfuncs.c: ditto.
+	* gdb.base/exprs: ditto.
+	* gdb.base/interrupt.c: ditto.
+	* gdb.base/opaque0.c: ditto.
+	* gdb.base/printcmds.c: ditto.
+	* gdb.base/ptype.c: ditto.
+	* gdb.base/scope0.c: ditto.
+	* gdb.base/setvar.c: ditto.
+	* gdb.base/signals.c: ditto.
+	* gdb.base/twice.c: ditto.
+	* gdb.c++/misc.cc: ditto.
+	* gdb.c++/templates.cc: ditto.
+
+Fri Mar 24 06:11:05 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/vx-gdb.exp, lib/gdb.exp: Regexp cleanups (\[(\] -> \\(, etc.).
+
+	* gdb.base/a1-selftest.exp: Don't check for # followed by a digit
+	somewhere between `read' and `main.c'.  I'm pretty sure the
+	pattern ".*#\[0-9\].*" was slowing down pattern matching a lot,
+	and it isn't particularly useful.
+
+	* gdb.base/scope.exp: Make test names unique.  \[(\] -> \\(.
+
+Thu Mar 23 14:58:35 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/commands.exp (infrun_breakpoint_command_test): New test.
+
+Wed Mar 22 18:36:05 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/mt-slite: add LIBS and -nostdlib.
+	* config/slite-gdb.exp: add this new file to support sparclite target.
+
+Tue Mar 21 21:41:04 1995  Doug Evans  <dje@canuck.cygnus.com>
+
+	* config/vx-gdb.exp (gdb_load): Update test of vxworks_ld return code.
+
+	* gdb.base/a2-run.exp: Change argument to istarget from
+	"*-*-vxworks" to "*-*-vxworks*".
+	* gdb.base/{break.exp,default.exp,scope.exp}: Likewise.
+
+Tue Mar 21 17:08:47 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* lib/gdb.exp: add proc runto_main, for targets that use stubs, this
+	will not runto main but do a 'step' to step out of breakpoint().
+	* config/mt-slite: add -Dusestubs.
+
+Tue Mar 21 12:14:12 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/printcmds.exp (test_artificial_arrays): Send ^V@
+	instead of just @.
+
+	* gdb.base/signals.exp: Add test for "handle all print".
+	* TODO: Remove "handle all print".  Also remove item about
+	checking copyright date (I don't like the idea of a spurious FAIL
+	based on when we run the tests).
+
+	* gdb.base/recurse.exp: Enable test for SunOS4.  xfail one test
+	for SunOS4 (reason for failure not investigated).  Remove
+	redundant test for $binfile.
+
+	* gdb.base/nodebug.c (array_index): Call malloc.
+
+	* gdb.base/{corefile.exp,default.exp}: Make names of "up" tests unique.
+
+Mon Mar 20 10:08:17 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/recurse.exp: Update gdb_test invocation to use new
+	conventions and slightly simplify the matching regexp.
+
+Fri Mar 17 05:43:28 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/break.exp: Update gdb_test invocation to use new
+	convention.
+
+	* lib/gdb.exp: If noargs is not set, set it to 0.
+
+	* gdb.base/nodebug.exp: Comment out redundant test.  Make name of
+	tests unique.
+
+	* lib/gdb.exp: Skip CHILL for AIX and Solaris.
+
+Thu Mar 16 16:27:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/nodebug.exp: It is OK if GDB thinks top and middle have
+	one argument of type "<non-float parameter>".
+
+Wed Mar 15 15:54:56 1995  Stu Grossman  (grossman@cygnus.com)
+
+	* config/rom68k.exp:  New file to support Motorola IDP board.
+	* gdb.base/a2-run.exp:  Skip this file if noargs is set.
+	* gdb.base/break.c:  Change things around so that this program
+	doesn't depend upon args.  This is necessary to make remote
+	targets work (in general, they can't take args).
+	* gdb.base/break.exp:  Don't try to send args to program.  Don't
+	expect output.  Also, replace lots of code with gdb_test.
+
+Wed Mar 15 04:11:14 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/printcmds.exp (test_character_literals_accepted): Test
+	printing of '\'' (which is what the comment says we are testing,
+	even though we were not), not '''.
+	(test_integer_literals_rejected): Test that printing ''' is an error.
+
+	* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
+	gdb.chill/chexp.exp, gdb.base/printcmds.exp,
+	gdb.c++/cplusfuncs.exp, gdb.chill/callch.exp, gdb.chill/misc.exp,
+	gdb.chill/pr-6292.exp, gdb.chill/string.exp, gdb.chill/tuples.exp:
+	Use gdb_test not test_print_accept.
+	* lib/gdb.exp: Remove test_print_accept.
+
+	* gdb.base/signals.exp (signal_tests_1): Make pass message
+	consistent with fail message.
+
+	* gdb.base/whatis.exp: Remove xfails for printing char vs.
+	unsigned char; the bug (PR 1821) is fixed.
+
+	* gdb.base/scope.exp: Remove xfails for PRs 1843 and 1868.
+
+	* gdb.base/scope.exp (test_at_localscopes): Call pass for
+	successful tests--makes xfailing them work right.
+
+Tue Mar 14 07:39:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp (gdb_test): Between $pattern and $prompt, expect
+	only \r\n, not .*.  The test can pass .* as the last thing in
+	$pattern if that is what it wants.  In addition to providing this
+	flexibility, this change should speed up pattern matching in cases
+	where the pattern already ended with .* (there were a number of
+	them).  This change also helps catch bad patterns--in the old
+	scheme the typo "char \*" instead of "char \\*" would pass.  Now
+	it is caught.
+	* Many .exp files: Update callers.
+
+	* gdb.base/funcargs.exp: Replace \[(\]+ with \\(.  The latter is
+	clearer and does not spuriously match multiple ('s.  Likewise for
+	) and *.
+
+	* gdb.base/nodebug.exp: Test ability to call a function and pass
+	it a string (even with no debugging info).
+
+	* gdb.base/printcmds.exp (test_integer_literals_rejected): Change
+	"p '\'", which is the same as "p ''" once tcl gets done with
+	quoting, to "p '\\'", which I suspect is what is intended (one
+	backslash gets sent to GDB).
+
+	* gdb.base/printcmds.exp (test_artificial_arrays): New tests.
+
+Fri Mar 10 13:31:46 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/a1-selftest.exp: Remove xfail for solaris.  The bug (PR
+	1817) was fixed literally years ago.
+
+Fri Mar 10 02:49:40 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/funcargs.exp (call_after_alloca):  Remove `next'
+	test, it causes stepping out of call_after_alloca_subr with
+	optimizing compilers.
+	(localvars_in_indirect_call):  Consume GDB prompt if `finish'
+	fails.
+
+	* gdb.c++/templates.exp:  Source templ-info.exp only if
+	the templates executable exists.
+
+	* gdb.c++/misc.cc (class Contains_static_instance,
+	class Contains_nested_static_instance),
+	gdb.c++/classes.exp (test_static_members):  Test printing of
+	a class that contains a static instance of the class.
+
+Thu Mar  9 11:43:55 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/langs2.c (cppsub_): Don't prototype.
+	* gdb.base/langs2.cxx (cppsub_): Fix prototype (cosmetic value
+	only, I believe).
+
+Wed Mar  8 10:29:33 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp (skip_chill_tests): New procedure.
+
+	* gdb.base/signals.exp (signal_tests_1): xfail for irix.
+
+Mon Mar  6 10:44:06 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.exp: Delete redundant ".*" at the beginning of
+	each expect pattern.  Cuts runtime from 12 to about 4 seconds.
+
+Thu Mar  2 05:31:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/langs.exp: Don't insist that foo__Fi be demangled.
+
+	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Only
+	disassemble 8, not 16, instructions for part 4.
+
+	* config/vx-gdb.exp (gdb_start): Use \030, not \CX.  tcl doesn't
+	support the latter anymore.
+
+	* gdb.base/Makefile.in: Try compiling callfuncs.c, if that fails try
+	-DNO_PROTOTYPES.
+	* gdb.base/callfuncs.c: Control use of prototypes based on
+	NO_PROTOTYPES, not __STDC__.
+	* gdb.base/callfuncs.exp (do_function_calls): xfail one of the
+	t_float_values2 tests if prototypes in use.
+
+	* gdb.base/callfuncs.c (t_float_values, t_float_values2,
+	t_double_values):  When checking differences against DELTA, check
+	that difference is within the range (-DELTA,DELTA), not just
+	(-infinity,DELTA).
+
+Tue Feb 28 16:28:54 1995  Kung Hsu  <kung@mexican.cygnus.com>
+
+	* config/mips-gdb.exp (gdb_load): In every test case, we need to do
+	'file' command firts, then 'target', then 'load', this is due to gdb
+	target set up.
+	* config/mips-gdb.exp: Fix a couple regular exp bugs.
+
+Thu Feb 23 17:44:55 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.s (fmemLRbug_tests): Add tests for the indexing
+	FP load/store variants.
+	* gdb.disasm/hppa.exp (fmemLRbug_tests): Test new variants.
+
+Wed Feb 22 18:29:08 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>
+
+	* gdb.base/term.exp: Do not give a warning if not native, it is
+	not an abnormal condition.
+
+Tue Feb 21 13:08:47 1995  Jim Kingdon  <kingdon@cygnus.com>
+
+	* gdb.base/ptype.exp: Accept char[0] as well as char[] for "ptype
+	t_char_array".
+
+Sun Feb 19 13:10:06 1995  Jim Kingdon  <kingdon@rtl.cygnus.com>
+
+	* lib/gdb.exp (default_gdb_version): Pass GDBFLAGS to gdb when we
+	are getting the version number.
+
+	* gdb.base/{a1-selftest.exp,corefile.exp}: Do not give a warning
+	if not native, it is not an abnormal condition.
+
+Thu Feb 16 15:56:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp: Just use "file exists", rather than undocumented
+	dejagnu procedure "findfile".
+
+Thu Feb 16 10:30:24 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/mt-vxworks (CFLAGS): Set to -g -Dvxworks.
+	  (LDFLAGS): Set to -Xlinker -Ur.
+
+	* Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB, GDBFLAGS):
+	  Removed, these values are set by lib/gdb.exp.
+
+	* lib/gdb.exp: If GDBFLAGS is unset, set it to -nx.
+
+Wed Feb 15 14:23:28 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* config/vx-gdb.exp (spawn_vxgdb): Use default_gdb_start instead
+	  of replicating gdb startup code.
+
+	* config/mt-vxworks (LDFLAGS): Set to -r.
+	  (CFLAGS_FOR_TARGET): Removed.
+
+	* config/vx-gdb.exp: always set prompt; gdb.exp sets it to
+	  (gdb) and gdb for vxworks uses (vxgdb).
+
+	* Makefile.in, gdb.{base,c++,chill}/Makefile.in (GDB): If a gdb
+	  executable is not in the tree and host != target, use sed and
+	  program_transform_name to determine the gdb name used by the
+	  target.
+
+	* configure.in, gdb.{base,c++,chill}/configure.in: changed so
+	  *-*-vxworks* matches vxworks and *-*-netware* matches NetWare.
+
+Sun Feb 12 08:11:58 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/{callfuncs.exp,callfuncs.c}: Add tests for passing
+	floats, chars, and shorts where there are ANSI-style function
+	definitions.
+
+	* gdb.base/langs.exp, gdb.base/langs*: New test.
+	* gdb.base/Makefile.in: Build it.
+	* TODO: Remove item about checking that C names don't get C++
+	demangling applied; this test tests it.
+
+Thu Feb  9 12:43:56 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/weird.exp: Remove "Haven't examined" comment which
+	went with the const70 xfail.  The xfail went away a year ago.
+
+	* gdb.base/signals.exp: Rename a bunch of tests to give unique names.
+
+	* gdb.base/corefile.exp: Give backtrace test unique name.  xfail
+	for hp300.
+
+	* gdb.base/interrupt.exp: Also xfail hpux (for hp300).
+
+	* gdb.base/a1-selftest.exp: Don't run on hp300.
+
+Sat Feb  4 15:04:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (site.exp): Set host_alias and target_alias as well
+	as host_triplet and target_triplet.
+
+Wed Feb  1 08:03:48 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/a1-selftest.exp: Invoke stty before starting inferior.
+
+	* gdb.base/nodebug.exp: Add xfails for ultrix and irix5 (same
+	places as other ecoff systems).
+
+	* gdb.base/a1-selftest.exp (test_with_self): Don't invoke stty on
+	ultrix.
+
+Mon Jan 30 11:44:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/nodebug.c (inner): Use variables so AIX linker doesn't
+	remove them.
+	* gdb.base/nodebug.exp: Accept "function" in addition to "text
+	variable and "variable" in addition to "data variable".
+	* gdb.base/nodebug.exp: xfail datalocal and bsslocal tests for AIX.
+
+	* gdb.base/list.exp (test_forward_search): Set listsize to 4 not
+	2.
+	* gdb.base/list1.c (long_line): Add additional statement at start
+	of function.
+	* gdb.base/list.exp (test_forward_search): Update line number to
+	reflect new statement.
+
+Sun Jan 29 13:34:25 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/signals.exp:  Reinitialize searched source directories
+	after gdb_start call.
+
+Sat Jan 28 01:34:44 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/Makefile.in (clean): Delete "errs" file.
+	* gdb.stabs/Makefile.in: Likewise.
+
+	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Revert last
+	change.  Instead split the tests into smaller pieces.
+	* gdb.disasm/hppa.s: Corresponding changes.
+
+Fri Jan 27 09:24:51 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
+	Quote ^C when passing it to stty.  For some shells ^ is a pipe.
+
+	* gdb.base/funcargs.exp: Modify many tests so that every test
+	either passes or fails.  Make some test names unique.
+
+Thu Jan 26 19:20:34 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/a1-selftest.exp (test_with_self), gdb.base/interrupt.exp:
+	Call stty to set interrupt character.
+
+	* gdb.disasm/hppa.mt (hppa), gdb.stabs/hppa.mt (weird.o): Check
+	for HP assembler versus GNU assembler based on actual behavior of
+	$(CC), rather than assuming that $(AS) is always the GNU assembler.
+
+	* TODO: Suggest a few more stepping tests.
+
+Wed Jan 25 14:52:41 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/default.exp: xfail no-stack backtraces for h8300,
+	restart GDB for h8300 after a continue.
+	(return): Add pattern to match a29k-udi behavior.
+	* gdb.base/nodebug.exp: Remove obsolete comment.
+	* gdb.base/regs.exp: New file, testing of register displays.
+	* gdb.base/return.exp: Fix typo in reference to $objdir.
+	* gdb.base/whatis.exp: Always start with a fresh GDB.
+
+Wed Jan 25 11:12:07 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.disasm/hppa.exp (all_fpu_comparison_tests): Set timeout
+	higher, these tests generate a lot of output.
+
+Tue Jan 24 07:58:44 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp (gdb_test): Remove catch from around the send.  The
+	code following the catch silently ignored some errors; without the
+	catch they should be thrown like any other tcl error.  Also, the
+	catch used "" instead of {} which meant all the callers who wanted
+	to include one of the characters "[]$ had to quote it an extra time.
+	* gdb.base/{callfuncs.exp,commands.exp,gdbvars.exp,printcmds.exp,
+	ptype.exp,signals.exp,watchpoint.exp}, gdb.c++/{cplusfuncs.exp,
+	demangle.exp}, gdb.chill/chexp.exp, gdb.fortran/exprs.exp:
+	Remove extra quoting.
+
+Mon Jan 23 21:57:54 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/commands.exp: Make test names unique; every test either
+	passes or fails.  Update some comments.
+
+	* gdb.disasm/hppa.exp (do_system_control_tests): Update.
+
+Sat Jan 21 15:34:52 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	The following fixes a FAIL caused by the fact that the alpha stabs
+	configuration didn't use the ".if alpha" code in weird.def.
+	* gdb.stabs/weird.def (v_comb): Use type attribute to specify 32
+	bit pointer, so the 32 bit version works even on the alpha.
+	* gdb.stabs/{alpha.mt,ecoff.mt,aout.sed,hppa.sed,xcoff.sed,weird.def}:
+	Remove the stuff which allowed us to have separate versions for
+	alpha and everything else.
+
+	* gdb.c++/cplusfuncs.exp (test_lookup_operator_functions): Fix
+	regexp which "info func operator\[\](" is supposed to match.  Fix
+	string to send to GDB.  Note that GDB still doesn't work right.  Add a
+	new test for "info func .perator\[\](" which GDB does handle correctly.
+
+	* gdb.base/nodebug.exp: xfail most of the new tests for ecoff systems.
+
+Fri Jan 20 12:14:23 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.c++/classes.exp, gdb.c++/cplusfuncs.exp,
+	gdb.c++/inherit.exp, gdb.c++/templates.exp, gdb.c++/virtfunc.exp,
+	gdb.fortran/exprs.exp, gdb.fortran/types.exp, gdb.chill/chexp.exp,
+	gdb.base/printcmds.exp: Remove passcount, failcount, etc., stuff;
+	it makes the tests harder to understand and confuses test-o-matic.
+	The preferred style is that each test provides a PASS or a FAIL,
+	and has a unique message (e.g. "continue #54" not just "continue")
+	which is the same for the pass and the fail.
+	* gdb.fortran/exprs.exp, gdb.fortran/types.exp,
+	gdb.chill/chexp.exp: Move test_print_accept and test_print_reject
+	to lib/gdb.exp.
+	* gdb.base/printcmds.exp: Use test_print_accept.  Remove
+	prt_accept which was basically the same thing.  Likewise for
+	test_print_reject and prt_reject.
+	* lib/gdb.exp (test_print_reject): Add some more error message
+	patterns to match from the former printcmds.exp (prt_reject).
+	* gdb.c++/classes.exp, gdb.base/scope.exp: Remove spurious xfails.
+	One defect of the passcount stuff is that some of it failed to
+	report XPASS where appropriate.
+	* gdb.c++/cplusfuncs.exp (print_addr_of): No longer accept extra
+	stuff before and after arg in expected pattern.
+	(test_paddr_operator_functions): Re-do test without print_addr_of;
+	this is the only test which seems to want extra stuff there.
+
+Tue Jan 17 10:47:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/nodebug.exp: Update new tests to reflect improved
+	wording of gdb output.
+
+	* gdb.base/nodebug.exp: Add tests to check that "print", "whatis"
+	and "ptype" work on variables in files compiled without -g.
+	Replaces commented out "maint print msymbol" tests.
+
+Mon Jan 16 12:13:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/setvar.c (dummy): Call malloc.
+
+	* gdb.stabs/aout.sed: Enclose comments within a sed command to avoid
+	losing with the irix4 sed.
+
+	* gdb.base/sigall.exp (test_one_sig): Add xfail for "get signal
+	ALRM" on irix4.
+
+Sun Jan 15 21:58:26 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* TODO: Remove items about corefile.exp testing new exec-file and
+	backtrace; both are now done.  Add items about printing enums.
+
+Sat Jan 14 11:25:28 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/sigall.exp (test_one_sig): Attempt to recover if
+	"get signal $thissig" test fails.
+
+	* gdb.base/setvar.exp: Check for and reject crazy expected type hacks.
+
+Thu Jan 12 01:14:53 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/sigall.c (gen_*): Pass argument to handle_* to avoid
+	compiler warning with dec alpha compiler.
+
+	* gdb.base/commands.exp (if_while_breakpoint_command_test): Remove
+	extra \n from gdb_test call (this explains why the prompt test
+	that I removed yesterday was there).
+	(user_defined_command_test): Remove extra \n and prompt test.
+
+	* gdb.base/sigall.c: If SIGABRT == SIGLOST, just act as if SIGLOST
+	doesn't exist.  Likewise if SIGIO == SIGPOLL, pretend SIGPOLL
+	doesn't exist.
+	* gdb.base/sigall.exp: Remove special handling for SIGIO and SIGPOLL.
+	Also remove alpha workaround, which turns out to be because
+	SIGABRT == SIGLOST.
+
+	* gdb.base/sigall.exp: Add workaround for alpha weirdness.
+
+	* gdb.base/help.exp: Don't test "help show".
+
+Wed Jan 11 14:37:04 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/commands.exp: Call gdb_exit and gdb_start so that
+	"set print address" is on.
+	* gdb.base/commands.exp (if_while_breakpoint_command_test): Don't
+	pass prompt to gdb_test; gdb_test already looks for the prompt.
+
+	* gdb.base/help.exp: Replace most of docstring for "define" with ".*".
+
+	* gdb.base/a1-selftest.exp: Don't test "maint dump-me".  That test
+	was a vestige of the manual TESTSTRATEGY, and the purpose of it
+	was to make sure that gdb can read a core file.  But (a) the "read
+	the corefile" part didn't make it to a1-selftest.exp, we just
+	delete the corefile after creating it, and (b) we test reading
+	corefiles in corefile.exp anyway.  Also, this test left around a
+	xgdb process on Solaris.
+
+	* gdb.base/corefile.exp: Also test backtrace.
+
+Wed Jan 11 00:14:40 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/commands.exp: Test a simple user defined command with
+	arguments and if/while statements; verify the full user command is
+	printed by "show user".
+
+	* gdb.base/commands.exp: Test if/while commands as part of a
+	breakpoint command list; verify they appear in breakpoint
+	information.
+
+Wed Jan 11 00:47:58 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/sigall.c (gen_FPE): Generate SIGFPE with kill() rather
+	than by dividing by zero.
+
+Tue Jan 10 21:38:05 1995  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/watchpoint.exp: hppa*-*-*bsd* no longer has problems
+	performing an inferior call with watchpoints enabled.
+	* gdb.base/watchpoint.c (main): Delete second unnecessary read
+	call.
+
+Tue Jan 10 18:42:07 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.stabs/weird.exp: Allow spaces followed by backspaces in echo
+	of "file" command.
+
+	* gdb.c++/classes.exp (test_ptype_class_objects, ptype class Foo):
+	Add additional pattern for when "int operator int(void);" appears
+	in a different order.
+
+Mon Jan  9 16:22:46 1995  Jim Kingdon  <kingdon@lioth.cygnus.com>
+
+	* gdb.base/signals.exp: Call gdb_exit and gdb_start.
+
+	* gdb.base/help.exp: Replace most of docstrings for "info signals"
+	and "signal" with ".*".
+
+Wed Jan  4 11:35:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add note about "handle all nostop".
+
+	* gdb.base/{sigall.c, sigall.exp}: New test.
+	* gdb.base/Makefile.in: Add it.
+
+Thu Jan  5 17:34:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* lib/gdb.exp, gdb.base/corefile.exp: Supply -nw as argument
+	when invoking GDB, suppresses any windowing interface.
+
+Mon Jan  2 17:40:21 1995  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/sim-gdb: New file, simulator testing support.
+
+Wed Dec 28 12:21:50 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/interrupt.exp: Test calling func1 twice.
+
+Wed Dec 21 12:51:37 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdb.base/list.exp (test_forward_search): Set timeout higher
+	when we'll be getting lots of output from gdb.
+
+	* gdb.base/a1-selftest.exp: Move code that was inside expect -re
+	"init_malloc" to after the expect statement.  Run it if that
+	regexp is taken, but also for two others which happen if source
+	cannot be found.
+
+Tue Dec 20 12:35:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/printcmds.exp: New test, for printing register before
+	program is running.
+
+Mon Dec 19 00:32:55 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/list.exp:  Correct some alternate expect patterns
+	to reflect changes in list1.c.
+
+Sat Dec 17 14:20:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add item regarding large frames.
+
+	* gdb.base/{funcargs.exp, funcargs.c} (call_after_alloca): New test.
+
+	* TODO: Remove item about enabling return.exp; it
+	is enabled.  Suggest a few more "return" tests.
+
+Sat Dec 17 02:33:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.c++/misc.cc, gdb.c++/inherit.exp:  Add testcases for
+	anonymous unions.
+
+Tue Dec 13 11:26:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.chill/Makefile.in: Put all rule before rules for pr-4975.o
+	and pr-5646.o, so "make" is the same as "make all", not "make
+	pr-4975.o".
+
+Wed Dec  7 19:02:02 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/list.exp: Adjust expectations to reflect changes in
+	list1.c.
+	(test_forward_search): New test proc.
+	* gdb.base/list1.c (long_line): New function, has long source line.
+
+Thu Dec  1 23:14:49 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdb.base/a1-selftest.exp: Change initial stepping to know about
+	additional line of code that was added.
+
+Wed Nov 30 19:43:14 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.s: Break the large branching tests into smaller
+	tests so as not to overflow expect's input buffers.
+	* gdb.disasm/hppa.exp: Corresponding changes.
+
+Fri Nov 25 13:37:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Beginnings of template debugging tests.
+	* gdb.c++/templ-info.cc:  New file to test for template
+	debugging capability of the compiler.
+	* gdb.c++/Makefile.in:  Add rule to build templ-info.exp from
+	templ-info.cc.
+	* gdb.c++/templates.cc:  Add explicit template instantiations
+	to enable compiling with -fno-implicit-templates. Add destructor
+	and 'value' method to T5 class for template tests.
+	* gdb.c++/templates.exp:  Add testcases for printing of template
+	types, setting breakpoints on template methods and calling a
+	template method. 
+
+Sat Nov  5 00:20:17 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.exp (branch_tests): Allow any symbol as the
+	branch target since some assemblers (gas-2.5)  may emit a
+	relocation for the branch instead of resolving it in the
+	assembler.
+
+Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/a1-selftest.exp:  Remove RS/6000 xfail for backtrace
+	through signal handler.
+
+Fri Oct 21 11:10:16 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* configure.in (*-*-netware): Use config/mt-netware.
+
+	* config/mt-netware: New file.
+	* config/mt-i386-netware: Removed, separate configs for different
+	  netware architectures are no longer needed now that we have
+	  --with-headers.
+
+Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/exprs.exp:  Remove xfail for alpha, it is fixed
+	by the recent changes to use ANSI C arithmetic conversions.
+
+Sun Oct  9 07:44:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/corefile.exp: Add (xfail'd) test for reinit_frame_cache
+	bug involving using inferior_pid to figure out whether to select a
+	frame.
+
+Wed Sep 28 23:12:02 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.exp: Change arg[0..3] to r[26..23] to
+	match the current disassembler output.
+
+Fri Sep 16 11:42:41 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.fortran/exprs.exp: Expect VOID instead of void.
+	* gdb.fortran/types.exp: Escape the expected '*'s in Fortran
+	types, expect "int" as type of integer values (for now).
+
+Wed Sep  7 23:33:51 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/commands.exp: New tests for if/while commands.
+
+Tue Sep  6 13:16:11 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* lib/gdb.exp (runto):  Replace sub-pattern for hex value
+	by .*, since hex values have different syntax in Chill mode.
+
+Tue Sep  6 02:15:51 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.c++/demangle.exp (test_arm_style_demangling):  Remove
+	linefeed from expect pattern for repeated types with indices > 9.
+
+Mon Aug 29 14:20:44 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	First part of Fortran test suite.
+	* gdb.fortran: New directory.
+	* gdb.fortran/exprs.exp, gdb.fortran/types.exp: New files.
+
+Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/default.exp:  Update expect pattern for load command
+	without arguments.
+
+Wed Aug 24 13:15:02 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+	* configure.in: Change i386 to i[345]86.
+	* gdb.base/configure.in: Likewise.
+	* gdb.c++/configure.in: Likewise.
+	* gdb.chill/configure.in: Likewise.
+
+Tue Aug 23 19:14:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lib/gdb.exp (gdb_run_cmd): Move comment out from between expect
+	patterns, since that is not a valid context for comments.
+
+Fri Aug 19 15:07:30 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* gdb.c++/demangle.exp (test_arm_style_demangling): Add tests for
+	repeated types and repeated types with indices > 9.
+
+Tue Aug 16 15:57:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.base/printcmds.exp: Remove all the a29k XFAILs tagged with
+	2417; old bug has been fixed.
+
+Fri Aug 12 19:35:41 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/interrupt.exp: When trying to wake up the inferior,
+	send the newline ourselves instead of assuming gdb_test will do
+	so when passed an empty input string.
+
+	* gdb.stabs/hppa.mt: Use $(AS), not $(CC) to assemble the
+	stabs testcode.
+
+Fri Aug  5 17:01:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* lib/gdb.exp (gdb_test): Don't send anything if the first
+	  argument is an empty string.  This makes cases where we want to
+	  match output that is already in expect's buffers (for example,
+	  matching a breakpoint after gdb_run_cmd has been called) work
+	  reliably.
+
+Tue Aug  2 10:24:08 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/netware.exp: New file.
+
+Thu Jul 28 12:54:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/mt-slite (LDFLAGS): If using the newlib in the tree, set
+	  the -B and -L prefixes so we can find the debugging stub.
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
+	  there and we are using the gcc from the tree.
+
+	* gdb.base/types.c: Removed.
+
+	* gdb.base/configure.in: Look for makefile fragments in ../config.
+	  Recognize i386-*-netware.
+	* gdb.c++/configure.in: Likewise.
+
+Mon Jul 25 23:48:50 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/corefile.exp:  Change `else if' to `elseif', which is
+	the correct TCL syntax.
+
+Mon Jul 25 15:35:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* gdb.base/opaque.exp: use runto instead of messing around with
+	  breakpoints.  Simplify by using gdb_test.
+
+	* gdb.base/bitfields.exp: restart between tests on netware targets
+	  because breakpoints aren't relocated after target death.  Run
+	  processes to completion.
+
+	* gdb.base/{opaque,watchpoint}.exp: Use gdb_run_cmd.
+
+Sun Jul 24 09:55:51 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in:  Remove extra tabs that confuse some versions
+	of "make".  Use the newly built gdb to test with by default,
+	rather than the first one in the tester's search path.
+
+Sat Jul 23 15:05:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.base/whatis.exp (v_signed_short_array): Fix a typo.
+
+	* gdb.base/help.exp: Update expected add-symbol-file, ignore, and
+	condition help.
+
+Tue Jul 19 10:26:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* lib/gdb.exp (runto): Rewrite in terms of gdb_run_cmd.
+
+	* lib/gdb.exp (gdb_run_cmd): New function, used to start program
+	  running.
+	* gdb.base/bitfields.exp: Use gdb_run_cmd to start program.
+	* gdb.base/funcargs.exp: Likewise.
+
+	* gdb.base/bitfields.exp: Simplify by using gdb_test.
+	* gdb.base/funcargs.exp: Likewise.
+
+	* lib/gdb.exp (gdb_test): if match times out, don't call fail if
+	  message is "".
+
+Mon Jul 18 12:18:07 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* gdb.base/{a2-run,callfuncs,funcargs,interrupt,mips_pro,nodebug,
+	  return,signals,twice}.exp: Handle non-existant binaries
+	  consistantly.
+
+	* gdb.base/corefile.exp: Execute coremaker to generate core dump.
+	* gdb.base/Makefile.in: Don't try to generate a core dump, we
+	  might testing a cross development system.
+
+Thu Jul 14 18:13:56 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in (RUNTEST_FOR_TARGET): Fix relative pathname, the
+	  runtest script is relative to ${srcdir}, not ${rootdir}.
+
+Thu Jul 14 14:56:59 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.base/signals.exp: Allow for optionality of breakpoint
+	address.
+
+Thu Jul 14 11:21:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.base/{ptype.exp,ptype.c}: Add t_char_array test.
+
+Tue Jul 12 12:22:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* gdb.c++/cplusfuncs.cc: Include <stddef.h>, not <sys/types.h>,
+	  for size_t definition.
+	* gdb.c++/templates.cc: Likewise
+
+	* config/mt-i386-netware: New file.
+
+	* gdb.base/interrupt.c: Do not test if errno == EINTR if it's not
+	  defined.
+
+	* gdb.base/Makefile.in: Added support for systems that name core
+	  files by appending "core" to the program name.
+	* gdb.base/a1-selftest.exp: Likewise.
+
+Mon Jul 11 23:59:18 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/return.exp:  Add comment and message for `return double'
+	test failure on Sparc Solaris.
+
+Mon Jul  4 12:10:48 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lib/gdb.exp (runto): Allow for optionality of breakpoint address.
+
+Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.c++/misc.cc:  Instantiate classes to inhibit the compiler
+	from optimizing them away.
+	* gdb.c++/classes.exp, gdb.c++/inherit.exp:  Update ptype expect
+	patterns to include default constructors and assignment operators,
+	to match gcc versions beyond 2.5.8. Accept any cplus demangling
+	character in the output of the virtual base pointer.
+
+Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.c++/cplusfuncs.exp:  Use string_to_regexp and a regular
+	expression match in print_addr_of to avoid unintented matches.
+	* gdb.c++/virtfunc.exp:  Accept alternate ptype output of g++
+	versions up to 2.5.8.
+
+Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.base/list.exp:  Tweak alternate pattern for listing of an
+	included file to run under newer versions of expect.
+	* gdb.c++/demangle.exp:  Add spaces to the expect patterns between
+	consecutive >'s in templates to accomodate recent cplus-dem.c change.
+	Remove xfail for the virtual table of BDDHookV.
+
+Sat Jun 18 12:51:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lib/gdb.exp (string_to_regexp): Set a default result.
+	(default_gdb_start): Fix misleading message.
+
+Wed Jun 15 12:10:10 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/mt-a29k-udi, config/mt-i960-nindy, config/mt-sparc-aout:
+	Remove all CC, etc definitions.
+	* config/mt-hpux: New file.
+	* config/mt-mips-ecoff (CFLAGS_FOR_TARGET): Remove:
+	(CFLAGS, LDFLAGS): Define.
+	* config/mt-slite (CFLAGS_FOR_TARGET): Change to LDFLAGS.
+
+	* Makefile.in (site.exp): Don't insert host_os, etc.
+	(just-check): Just use RUNTEST with RUNTESTFLAGS only.
+	(distclean): Check existence of subdir.
+	* gdb.base/configure.in (hppa*-*-hpux*): Recognize.
+	* gdb.base/Makefile.in: General cleanup and simplification.
+	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
+	to build executables.	Use default rule to build .o files.
+	(EXPECT, RUNTEST, CC): Fix relative pathname.
+	(site.exp): Don't insert host_os, etc.
+	* gdb.base/signals.c (main): Don't call signal unless SIGALRM
+	and/or SIGUSR1 defined.
+	* gdb.base/watchpoint.c: Don't include stdio.h a second time.
+	* gdb.c++/Makefile.in: General cleanup and simplification.
+	Use CC, CFLAGS, and LDFLAGS instead of ..._FOR_TARGET versions
+	(CFLAGS): Remove.
+	(EXPECT, RUNTEST_FOR_TARGET, CXX): Fix relative pathname.
+
+Fri Jun 10 10:55:09 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* gdb.base/recurse.exp: Misc changes to get tests running again
+	after Kung's changes to the watchpoint code.
+	* gdb.base/watchpoint.exp: Likewise.
+
+Thu Jun  9 15:16:55 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* lib/gdb.exp (string_to_regexp):  Convert {\} also.
+
+Wed Jun  8 12:12:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/udi-gdb.exp, config/unix-gdb.exp: Call default_gdb_start.
+	* lib/gdb.exp (default_gdb_start): Define.
+	* gdb.base/bitfields.exp, gdb.base/break.exp, gdb.base/exprs.exp,
+	gdb.base/funcargs.exp, gdb.base/opaque.exp,
+	gdb.base/printcmds.exp, gdb.base/ptype.exp, gdb.base/recurse.exp,
+	gdb.base/scope.exp, gdb.base/setvar.exp, gdb.base/watchpoint.exp,
+	gdb.c++/classes.exp, gdb.c++/misc.exp, gdb.c++/virtfunc.exp:
+	Don't call gdb_target_udi in between tests.
+
+Tue Jun  7 08:30:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.c++/demangle.exp: Use gdb_test_exact, rather than demangle
+	(which was basically just a local version of the same thing).  In
+	addition to avoiding duplication, gdb_test_exact is faster.
+	* lib/gdb.exp (gdb_test_exact): Fix typo.
+
+	* lib/gdb.exp (delete_breakpoints): If there were no breakpoints,
+	don't give an error.
+
+	* gdb.base/term.exp: Call delete_breakpoints before starting.
+
+	* gdb.base/Makefile.in (EXECUTABLES): Remove t10.
+	(t10): Add comment.
+
+Mon Jun  6 18:26:50 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Reorganization of the GDB Test Suite.
+
+	* gdb.base: New directory, contains all the basic tests.
+	* gdb.c++: New directory, tests specific to C++.
+	* gdb.chill: New directory, tests specific to Chill.
+	* gdb.t00, gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06,
+	gdb.t07, gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13,
+	gdb.t15, gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23,
+	gdb.t24, gdb.t30, gdb.t31: Removed directories, contents moved
+	into appropriate new directories (t00-t17 to base, t20-t23 to c++,
+	t30-31 to chill).
+	* */gdbme.*: Rename to match appropriate expect scripts.
+	* gdb.base/bitfields.c, gdb.base/break.c, gdb.base/callfuncs.c,
+	gdb.base/coremaker.c, gdb.base/exprs.c, gdb.base/funcargs.c,
+	gdb.base/interrupt.c, gdb.base/list0.c, gdb.base/list0.h,
+	gdb.base/list1.c, gdb.base/mips_pro.c, gdb.base/nodebug.c,
+	gdb.base/opaque-info.c, gdb.base/opaque0.c, gdb.base/opaque1.c,
+	gdb.base/printcmds.c, gdb.base/ptype.c, gdb.base/recurse.c,
+	gdb.base/return.c, gdb.base/run.c, gdb.base/scope0.c,
+	gdb.base/scope1.c, gdb.base/setvar.c, gdb.base/signals.c,
+	gdb.base/types.c, gdb.base/twice.c, gdb.base/watchpoint.c,
+	gdb.base/whatis-info.c, gdb.base/whatis.c: New names of C files.
+	* gdb.c++/cplusfuncs.cc, gdb.c++/templates.cc, gdb.c++/misc.cc,
+	gdb.c++/virtfunc.cc: New names of C++ files.
+	* gdb.chill/chillvars.ch: New name of Chill file.
+	* gdb.base/configure.in, gdb.c++/configure.in,
+	gdb.chill/configure.in: Merge in contents of gdb.t*/configure.in.
+	* gdb.base/Makefile.in, gdb.c++/Makefile.in,
+	gdb.chill/Makefile.in: Merge in contents of gdb.t*/Makefile.in.
+	* configure.in (configdirs): Update to reflect directory changes.
+	(target_abbrev): No longer define for any configuration.
+	* Makefile.in: Cosmetic improvements to header comments.
+
+Fri Jun  3 18:56:06 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Various changes to gdb.t31:
+
+	* Makefile.in (gdbme.o):  Compile with -fspecial_UC.
+	* gdbme.ch:  Make all key-words and predefineds be upper-case.
+	* chillvars.exp:  Expect key-words and predefinds in upper-case.
+
+	* chillvars.exp:  Use gdb_test_exact many places.
+	Change expected output for arrays (which now includes index labels).
+
+	* pr-5020.exp, gdme.ch (module PR_5020):
+	New test, for PR-5020.
+
+Thu Jun  2 16:02:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* lib/gdb.exp (string_to_regexp, gdb_test_exact):  New procedures.
+	* Makefile.in (CHILL_LIB):  Remove bogus redundant definitions.
+
+Sun May 29 22:31:42 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* Makefile.in:  Fix bit-rot in definitions of CHILL,
+	CHILL_FOR_TARGET and Chill_LIB.
+	* gdb.t31/gdbme.ch:  Fix syntax of nested array tuples.
+	* gdb.t31/Makefile.in:  Add definitions for CHILLFLAGS,
+	CHILL, and CHILL_LIB.
+
+Sat May 21 10:05:08 1994  Bill Cox  (bill@rtl.cygnus.com)
+
+	* Revert the previous changes.  Please see Rob's directory
+	  /lisa/test/rob/progressive/gdb/testsuite for these fixes.
+
+Thu May 19 12:51:00 1994  Bill Cox  (bill@rtl.cygnus.com)
+
+	* Makefile.in, configure.in, config/mips-gdb.exp,
+          config/mt-a29k-udi, config/mt-i386-aout, config/mt-i960-nindy,
+          config/mt-sparc-aout, config/udi-gdb.exp, config/unix-gdb.exp,
+          config/unknown.exp, gdb.t00/default.exp, gdb.t00/help.exp,,
+	  gdb.t00/teststrategy.exp, gdb.t01/Makefile.in, gdb.t02/Makefile.in,
+	  gdb.t02/whatis.exp, gdb.t03/Makefile.in, gdb.t03/gdbme.c,
+	  gdb.t04/Makefile.in, gdb.t05/Makefile.in, gdb.t06/Makefile.in,
+	  gdb.t06/break.exp, gdb.t06/signals.c, gdb.t06/signals.exp,
+	  gdb.t08/Makefile.in, gdb.t08/opaque.exp, gdb.t09/Makefile.in,
+	  gdb.t10/Makefile.in, gdb.t11/Makefile.in, gdb.t12/Makefile.in,
+	  gdb.t13/Makefile.in, gdb.t15/Makefile.in, gdb.t15/funcargs.exp,
+	  gdb.t15/gdbme.c, gdb.t15/return.exp, gdb.t16/Makefile.in,
+	  gdb.t17/Makefile.in, gdb.t17/callfuncs.exp, gdb.t17/gdbme.c,
+	  gdb.t20/Makefile.in, gdb.t21/Makefile.in, gdb.t21/cplusfuncs.exp,
+	  gdb.t22/Makefile.in, gdb.t22/virtfunc.exp, gdb.t23/Makefile.in,
+	  gdb.t24/demangle.exp, lib/gdb.exp:  Check in Rob's testing
+	  changes from 94Q1.
+
+Wed May 18 17:04:03 1994  Bill Cox  (bill@rtl.cygnus.com),
+
+	* config/mt-lynx, config/mt-m68k, config/mt-mips-ecoff,
+	  config/mt-slite, config/mt-unix, config/mt-vxworks: Add
+	  Rob's new testing fragments.
+
+Tue May 17 15:04:14 1994  Bill Cox  (bill@rtl.cygnus.com)
+
+	* config/mips-gdb.exp, config/udi-gdb.exp, config/vx-gdb.exp,
+          lib/gdb.exp: Replace error proc calls with perror.
+
+Mon May 16 19:00:50 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdb.t00/teststrategy.exp: Reorder so that AIX gdb can print the
+	version also, match on casted version strings, and match on
+	gdb startup case where the line numbers might be messed up.
+
+Fri May 13 18:00:27 1994  Bill Cox  (bill@rtl.cygnus.com)
+
+	* config/mt-i960-vx (LDFLAGS): Add '-r' option for test links.
+          (CFLAGS): Delete it from here.
+
+Tue May  3 16:08:09 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* gdb.t22/virtfunc.exp: Fix g++ ptype expected outputs.
+
+Fri Apr 29 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (RUNTEST): Default to just "runtest".
+
+Tue Apr 26 22:21:40 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t17/callfuncs.exp: More comments about t_func_values tests.
+	* gdb.t17/gdbme.c (t_func_values): Add comments about how and why
+	the code has been restructured.
+
+Thu Apr 21 12:48:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/default.exp (set write): Allow any number of \r and/or
+	\n, not just one of each.
+
+	* gdb.t07/gdbme.c (main): Don't take address of an array; SunOS4
+	/bin/cc gives a warning if you do.
+
+Thu Apr 21 11:54:04 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* gdb.t24/demangle.exp: change expect pattern of 
+	__t10ListS_link1ZUiRCUiPT0
+
+Wed Apr 13 15:05:00 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t07/{recurse.exp, recurse.c}: New tests for watchpoints
+	on local variables in recursive functions.
+
+	* gdb.t07/Makefile.in: Build the new test.
+
+Tue Apr 12 20:45:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t17/gdbme.c (t_func_values): Do not compare function pointers
+	directly.  Instead compare the return values from actual calls.
+
+Mon Apr 11 10:31:00 1994  Bill Cox  (bill@rtl.cygnus.com)
+
+	* Makefile.in (check): Set TCL_LIBRARY for runtest.
+
+Mon Apr 11 09:15:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* From Peter Schauer with minor modifications.
+        * gdb.t15/return.exp (return_tests): Handle targets where "return"
+        stops in mid-line in the caller.  Add xfail for returning a float
+        value on X86 targets.
+
+Tue Apr  5 15:16:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.exp (fcmp_tests): Break up into two halves
+	to avoid expect lossage.
+	(fmem_LRbug_tests): Likewise.
+	* gdb.disasm/hppa.s: Corresponding changes.
+
+	* gdb.disasm/hppa.exp: Rework escape sequences and end-of-line
+	conditions to work with latest dejagnu/expect.
+
+	* gdb.t15/funcargs.exp (finish from indirect call): No longer
+	expected to fail on the PA.
+	(backtrace in call with trampolines): Explicitly require main
+	to be frame #1 (no trampolines should show up in backtrace).
+
+	* gdb.t00/default.exp: Use "exp_continue" rather than obsolete
+	"continue -expect".
+	* gdb.t06/break.exp: Likewise.
+	* gdb.t07/watchpoint.exp: Likewise.
+	* gdb.t13/bitfields.exp: Likewise.
+	* gdb.t15/{funcargs,return}.exp: Likewise.
+	* gdb.stabs/weird.exp: Likewise.
+	* config/{mips,udi}-gdb.exp: Likewise.
+
+	* hppa.sed: Enclose comments within a sed command to avoid
+	losing with the old OSF1 sed.
+
+Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t02/whatis.exp, gdb.t08/opaque.exp:  Add XFAILs for
+	sequent dynix.
+	* gdb.t06/signals.exp:  Add clear_xfail for sequent dynix.
+	* gdb.t15/funcargs.exp:  Conditionally step again to really
+	finish from marker_call_with_trampolines. Handle the case where
+	the first step from within call_with_trampolines already steps
+	us back to main.
+	* gdb.t15/gdbme.c:  Add comment to closing brace of
+	call_with_trampolines for funcargs.exp.
+
+Tue Mar 29 23:55:27 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t07/watchpoint.exp (test_watchpoint_triggered_in_syscall): 
+	Fix typo(s).
+
+Sun Mar 27 16:53:14 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t07/gdbme.c: More code for watchpoint testing.
+
+	* gdb.t07/watchpoint.exp: Accept both "Watchpoint" and
+	"Hardware watchpoint" throughout file.
+	(test_watchpoint_triggered_in_syscall): New test.
+	(test_complex_watchpoint): New test.
+
+Fri Mar 25 17:05:31 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdbme.c (call_with_trampolines): New function to try and step
+	into.  Tests trampoline problems on the PA.
+
+	* funcargs.exp (localvars_in_indirect_call): No longer expect
+	stepping into indirect call to fail on PAs.
+	(test_stepping_over_trampolines): New test.
+
+Wed Mar 23 07:43:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestions for static member function tests, and
+	completion tests.
+
+Wed Mar 16 08:28:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestions for "p/a" tests.
+
+	* lib/gdb.exp: Set prompt to (gdb) if it isn't already set.
+	(default_gdb_exit): Replace all the hair with sending "quit" to
+	the process with a simple close.
+
+Tue Mar 15 08:45:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestions for shared library tests.
+
+Sun Mar 13 10:45:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestions for x/s tests.
+
+Fri Mar 11 08:22:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/help.exp: Replace most of docstrings for "tbreak",
+	"enable once", and "enable breakpoints once" with ".*".
+
+Thu Mar 10 08:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestions about structure passing tests.
+
+Mon Mar  7 13:45:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t03/gdbme.c:  gcc version 1 puts out the wrong stabs for
+	the primary1 test, use work around if __GNUC__ < 2.
+	* gdb.t06/signals.c:  Add comments for signals.exp pattern matching.
+	* gdb.t06/signals.exp:  Add XFAILs for i386 bsd and vax ultrix.
+	Test for bad output rather than waiting for timeout.  Issue
+	second continue only if first continue failed.
+
+Wed Mar  2 10:08:01 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.t21/cplusfuncs.exp (test_paddr_operator_functions): Do
+	operator[] test with gdb_test because the old code didn't seem to
+	be getting the quoting right with the new dejagnu.
+
+Thu Feb 24 19:49:25 1994  Rob Savoye  (rob@poseidon.cygnus.com)
+
+	* lib/gdb.exp: Set GDB to a fresh gdb if there is one, else use
+	one from the path.
+	* Makefile.in: Use a fresh expect if there is one, use runtest
+	from the src tree if there is one.
+  
+Thu Feb 24 18:49:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.t06/break.exp (test_next_with_recursion): Remove xfail for
+	next over recursive call.  Revise the tests from that point on
+	(which had been skipped) to match GDB's actual (correct) output.
+
+	* gdb.t07/watchpoint.exp (test_stepping): Remove xfail for bug
+	with next over a breakpoint whose condition is false.
+
+	* gdb.t00/help.exp: Comment out "help set print" tests just like
+	(and for same reason as) "help set" test.
+
+Mon Feb 14 09:58:23 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.s (fmemLRbug_tests): New tests.
+	* gdb.disasm/hppa.exp (fmemLRbug_tests): Run them.
+
+Sun Feb  6 15:36:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/break.exp (test_next_with_recursion): Remove no longer
+	necessary gdb_target_udi.
+
+	* gdb.t03/ptype.exp: For UDI, skip tests which call malloc.
+
+	* gdb.t02/whatis.exp, gdb.t03/ptype.exp: Remove xfails for PRs
+	1838 and 2417; they are fixed.
+
+	* gdb.t02/whatis.exp (v_char_array, v_signed_char_array),
+	gdb.t03/ptype.exp (ptype structure, ptype union):
+	Remove xfails; the test is looser than when the xfails were added.
+
+	* gdb.t00/{help.exp,default.exp}: Don't test "target remote" on UDI.
+	* gdb.t00/help.exp: Don't expect remote to be in "help target" output.
+
+	* gdb.t01/run.exp: Only run shell test if isnative.
+
+	* config/udi-gdb.exp (gdb_load): Use "file", not "load" command,
+	since "run" automatically loads if necessary.  Call gdb_target_udi
+	after the "file" since "file" kills any execution target.
+
+	* config/udi-gdb.exp (gdb_start): Don't send "set args main" to
+	GDB.  GDB doesn't work that way (not anymore at least) on UDI.
+	* gdb.t01/run.exp, gdb.t06/break.exp: Don't pass extra first
+	argument for UDI.
+
+Fri Feb  4 12:19:32 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.t17/interrupt.c: If we get EINTR, don't print an error message.
+
+	* gdb.t17/callfuncs.exp: Add xfails for rs6000.
+
+Sat Feb  5 09:11:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Re-write demangle to just call gdb_test,
+	properly quoting regexps.  This makes the second argument to
+	demangle a fixed string, which matches the callers, instead of a
+	shell-style pattern which is what the previous implementation
+	used.  Update some of the callers.
+
+Sat Feb  5 10:19:09 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.s (comib_tests): Add missing instruction.
+	(comib_nullified_tests): Fix typo.
+	* gdb.disasm/hppa.exp (all comb tests): Fix thinkos in expect
+	strings.  No longer expected to fail.
+
+	* gdb.disasm/hppa.s (addib_tests): Fix typo.
+	* gdb.disasm/hppa.exp (all addb tests): Fix thinkos in expect
+	strings.  No longer expected to fail.
+
+	* gdb.disasm/hppa.exp (fmpy_addsub_tests): Fix typo in expect
+	string.  No longer expected to fail.
+
+Fri Feb  4 23:45:11 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.exp (fcmp_tests): Fix thinko in expect string.
+	No longer expected to fail.
+
+	* gdb.disasm/hppa.exp (xmpyu_tests): Fix buglet in expect
+	string.  No longer expected to fail.
+
+Fri Feb  4 10:35:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Remove a bunch more tests which differ
+	only in the names (I probably got most of them).  I was even
+	generous with some which differed in underscores in names, and
+	probably missed a few, and I *still* was able to remove almost a
+	third of the file with almost no impact on testsuite coverage.
+
+Thu Feb  3 12:04:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/default.exp: Match udi_attach error message as well as
+	the one from child_attach.
+
+	* gdb.t00/default.exp: Use "." instead of "?" to match a question mark.
+
+	* gdb.stabs/weird.exp: Remove xfail for const70; just fixed in GDB.
+
+	* gdb.stabs/weird.def (bad_neg0type): Size of this type is 16, not 8.
+	* gdb.stabs/weird.exp: Remove xfail for "p bad_neg0"; this fixes it.
+
+	* Move test with enums and partial symbols back to
+	gdb.t03/{ptype.exp,gdbme.c} from gdb.stabs/{weird.def,weird.exp}.
+	Reverts the change of 26 May 93.  Per today's change to
+	stabs.texinfo, the behavior that weird.exp was expecting was
+	unreasonable; what is important is that the compiler+gdb get
+	things right, which happens with a recent gcc.  Also fix the test
+	to deal with native compilers which put out the stab gdb can't
+	deal with.
+
+Mon Jan 31 15:40:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Remove a bunch of tests which differ only
+	in the names.  The main thing these accomplish is to slow things down.
+	Many more such duplicates surely remain.
+
+	* gdb.t00/help.exp: Comment out "help support" test just like
+	(and for same reason as) "help set" test.
+
+Mon Jan 31 06:43:45 1994  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t06/break.exp:  Remove setup_xfails for
+	sparc-sun-solaris2.*, these tests now pass with latest gcc and gdb.
+	* gdb.t20/inherit.exp (test_ptype_si):  Update warning message
+	about known bug in gcc to include up through 2.5.8.
+	* gdb.t20/inherit.exp (test_ptype_vi):  Accept "_vb." as well as
+	well as "_vb$".
+	* gdb.t21/cplusfuncs.exp (test_lookup_operator_functions):
+	Remove setup_xfails for sparc-sun-solaris2.*, these tests now pass
+	with latest gcc and gdb.
+	* gdb.t22/virtfunc.exp (test_ptype_of_classes):  Accept "_vb." as
+	well as "_vb$".
+
+Sat Jan 29 23:31:26 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* configure.in (hppa*-*-*): Also configure and build stabs-only
+	tests.
+
+Thu Jan 27 08:21:16 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.t10/hppa.mt: A makefile fragment for the PA.
+	* gdb.t10/configure.in (hppa*-*-*): Use it.
+
+Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t09/corefile:  Increase timeout when spawning gdb explicitly.
+
+Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t06/signals.exp:  Handle blocked SIGTRAP on sun3 for bash
+	versions prior to 1.13.5.
+
+Tue Jan 18 20:10:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/default.exp (show prompt): In FAIL case, only match if
+	the prompt is at the start of a line.
+
+Mon Jan 17 20:07:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.disasm/hppa.s: Add new tests for sfu and copr instructions.
+	Enable "diag" instruction.  Delete copr from fpu_misc_tests, it's
+	in the copr tests now.
+	* gdb.disasm/hppa.exp: Run new sfu and copr tests.  Do not expect
+	copr in the fpu_misc tests anymore.  fpu_misc tests are no longer
+	expected to fail.
+
+Fri Jan 14 14:24:21 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* gdb.t00/teststrategy.exp, gdb.t07/watchpoint.exp,
+	gdb.t31/chillvars.exp, lib/gdb.exp:
+	Tweak to run under either version of expect.
+	* lib/gdb.exp (default_gdb_exit): Remove "catch" statement.
+	* gdb.t00/teststrategy.exp: Use isnative and verbose procedures.
+	* gdb.t11/list.exp: Remove extraneous whitespace.
+
+Sat Jan 15 09:57:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t16/printcmds.exp (test_print_strings): Accept
+	"(unsigned char *) " before the string.
+
+	* TODO: Add notes about printing of fancy types and GDB expressions.
+
+Thu Jan 13 17:16:09 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in: Pass LDFLAGS and LIBS to sub-makes.
+	* gdb.t06/configure.in: Don't try to compile signals test program
+	if doing mips-idt-ecoff.	
+
+Thu Jan 13 08:25:55 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* Most .exp files: Tweak to run under either version of expect.
+
+Tue Jan 11 15:21:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t12/scope.exp: Add xfails for rs6000.  Remove 1806 from existing
+	xfails; I'm not sure why they are failing, but not because of PR 1806.
+
+Mon Jan 10 22:14:20 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* config/unix-gdb.exp: Remove gdb_unload cause it's already
+	defined in lib/gdb.exp.
+
+Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t07/watchpoint.exp:  Clear xfail for calling function with
+	watchpoint enabled on mips, CALL_DUMMY_BREAKPOINT_OFFSET got defined.
+	* gdb.t20/gdbme.cc, gdb.t21/gdbme.cc:  Conversion operator functions
+	have to be typeless.
+
+Tue Jan  4 09:32:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Add suggestion for copyright year test.
+
+Mon Jan  3 11:35:26 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* configure.in (*-*-lynxos*): Add stabs tests.
+
+Wed Dec  1 21:54:05 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.stabs/hppa.sed: Only lables should ever start in column zero,
+	so insert a tab before any assembler directive in column zero.
+
+	* gdb.disasm/hppa.exp (all_fpu_memory_tests): Test FP quadword
+	stores.
+	* gdb.disasm/hppa.s (fpu_memory_indexing_tests): Add FP quadword
+	stores.
+	(fpu_short_memory_tests): Likewise.
+
+Mon Nov 22 13:23:22 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.stabs/ecoff.mt:  Delete alpha specific if block, fix typo.
+	* gdb.stabs/ecoff.sed:  Escape inserted blanks with backslashes, embed
+	.stabs directives in comments.
+
+Fri Nov 19 14:09:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: New file, describing tests we could write.
+	* gdb.t09/corefile.exp: Move description of tests to write to TODO.
+
+Tue Nov 16 21:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.exp: Add kludge to force re-sync.
+
+	* gdb.t00/teststrategy.exp: If we accidently send the "maint dump-me"
+	to xgdb instead of gdb, get out of gdb.
+
+Tue Nov 16 10:21:57 1993  Rob Savoye  (rob@cygnus.com)
+
+	* lib/gdb.exp: Make GDB and GDBFLAGS global so the scoping work
+	for info.
+
+Sat Nov 13 23:17:48 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* gdb.stabs/hppa.mt: A makefile fragment for the PA.
+	* gdb.stabs/configure.in (hppa*-*-*): Use it.
+	* gdb.stabs/hppa.sed: New sed script for the PA.
+
+Sat Nov 13 22:50:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs: Re-write weird.def and configuration to use sed
+	instead of cpp.  sed is portable and POSIX; cpp is neither.
+
+Fri Nov 12 15:26:36 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.exp: Remove one sun3 XFAIL which has been fixed.
+
+Mon Nov  8 16:55:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t20/gdbme.cc: Add comment about pmi being optimized out.
+
+Thu Nov  4 23:07:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/weird.exp, gdb.t22/virtfunc.exp: Accept "_vb." as well as
+	"_vb$".
+	* gdb.t00/teststrategy.exp: Add xfail for RS/6000.
+	* gdb.t03/ptype.exp: Add comments and messages about FAILs with xlc.
+
+Wed Nov  3 13:53:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* lib/gdb.exp: Comment out code which depends on non-existent
+	`transform' procedure.
+
+Wed Nov  3 11:23:11 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* lib/gdb.exp (default_gdb_exit): Remove `catch "close"'.
+	* lib/gdb.exp: Transform tool name.
+	* gdb.t*/*.exp: Change error to perror so it works with DejaGnu
+	1.1's new error handling system.
+
+Mon Nov  1 10:36:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in, gdb.t2*/Makefile.in: Add -O to CXXFLAGS.
+
+Fri Oct 29 17:58:14 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/default.exp: Avoid tests with a lot of .* in them.
+	They made pattern matching so slow that timeouts happened on
+	heavily loaded systems.  Now any output from "show print" which
+	gets us back to the GDB prompt is a PASS.
+
+Mon Oct 25 14:36:50 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* gdb.disasm/hppa.mt:  Use $(srcdir) in hppa.o make rule.
+
+Mon Oct 25 13:35:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.exp: Skip whole file with xfail for HPPA.
+
+	* gdb.t24/demangle.exp: Remove "3220" from the one remaining xfail.
+	It is not from PR 3220.
+
+Sun Oct 24 18:49:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/{help.exp,default.exp}: Loosen up a few more tests which
+	just started failing because they depended on the order the
+	subcommands are presented, or exact docstring text.  This kind of
+	test is a pain and has minimal benefit.
+
+Thu Oct 21 08:26:48 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t09/corefile.exp: At end of test, use "core" command with
+	no arguments.
+
+Wed Oct 20 08:56:02 1993  Stu Grossman  (grossman at cygnus.com)
+
+	* gdb.t{01 02 03 04 05 06 07 08 09 10 11 12 13 15 16
+	17}/Makefile.in:  Make it possible to run the testsuite with Sun
+	make and CC = cross gcc by adding explicit build rules for .o
+	files.
+
+Tue Oct 19 14:57:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t15/funcargs.exp: Don't put comments on same line as
+	setup_xfail (@#$*%& tcl braindamage!).
+  
+Mon Oct 18 21:50:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.disasm/hppa.exp: Use $objdir/$subdir/$binfile not just $binfile.
+
+Fri Oct 15 15:39:54 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* gdb.t20/classes.exp: 'const xxx &' becomes 'xxx const &'.
+	* gdb.t20/inherit.exp: remove three dumplicate entries.
+
+Fri Oct 15 13:45:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t06/break.exp: For "next over recursive call", fail on any
+	incorrect output, not just on "factorial (value=2)".
+
+Fri Oct 15 11:52:56 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t12/scope.exp:  Remove xfails, filename::var syntax should be
+	working now. Add an xfail if accesing a bss variable causes
+	a memory error if the target is not yet run.
+
+Thu Oct 14 19:16:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Clean up spacing (2 strings), inclusion of
+	constructor name (2 string), name of _GLOBAL_ demangling (2 strings),
+	name of __st* demangling (2 strings).  Did Kung really get the
+	more than 95 others right without testing them?
+
+Thu Oct 14 16:27:08 1993  Kung Hsu  (kung@cirdan.cygnus.com)
+
+	* gdb.t24/demangle.exp: clean up XFAILS, more than 100
+
+Thu Oct 14 11:40:30 1993  Jeffrey Law  (law@cs.uah.edu)
+
+	* configure.in (configdirs): Add gdb.disasm
+	* gdb.disasm: New directory for GDB disassembler tests.
+	* gdb.disasm/hppa.{exp,s,mt}: Disassembly tests for the HPPA.
+
+Thu Oct 14 11:40:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/help.exp: Don't test "help set".
+
+	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Remove all xfails
+	from within expect statements.  None of these happen anymore and
+	they cause regressions to be silently unnoticed.
+
+	* gdb.t20/inherit.exp, gdb.t22/virtfunc.exp: Add notes (in failure
+	messages) about known failures with gcc cygnus-2.4.5-930417.
+
+	* gdb.t02/Makefile.in, gdb.t08/Makefile.in: Make all depend on
+	comp-info.exp so it gets built if it doesn't exist.
+
+	* gdb.t13/{Makefile.in,bitfields.exp}: Remove comp-info.exp stuff;
+	it is no longer used.
+	* gdb.t13/comp-info.c: Removed.
+
+Wed Oct 13 22:54:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.t06/signals.exp: Add xfail for sun3.
+
+Thu Oct  7 12:01:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t17/interrupt.exp: Add xfail for Irix (currently not really
+	relevant because ^C doesn't get sent but failure can be reproduced
+	interactively).
+
+Tue Oct  5 10:43:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.stabs/alpha.mt:  New configuration file for alpha.
+	* gdb.stabs/configure.in:  Use it.
+	* gdb.stabs/ecoff.mt, weird-ecoff.sed:  Change sed script to enable
+	sharing with alpha.mt, redefine long to word via preprocessor.
+	* gdb.stabs/weird.def:  Conditionally adapt storage layout of v_comb
+	for alpha.
+	* gdb.stabs/weird.exp:  Handle compilation of weird.s by alpha
+	native cc.
+	* gdb.t00/teststrategy.exp:  Change expect string so that we
+	consume the `(xgdb)' from the command echo and from the gdb prompt.
+	* gdb.t05/expr.exp:  xfail "print unsigned int == (~0)" on the alpha.
+	gdb currently compares all values as long, so this failure probably
+	applies to any configuration where LONGEST is bigger than a target int.
+	* gdb.t08/comp-info.c:  New file to determine if gdbme is compiled
+	with gcc.
+	* gdb.t08/Makefile.in, opaque.exp:  Use it. Alpha native cc is unable
+	to handle opaque pointers, gcc is.
+	* gdb.t21/gdbme.cc, gdb.t23/gdbme.cc:  operator new takes a size_t
+	as first argument. Include <sys/types.h> and change all operator
+	new definitions to use size_t.
+	* gdb.t21/cplusfuncs.exp:  Handle changes in output for operator new
+	now that we use size_t.
+
+Wed Sep 29 00:55:49 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * gdb.t03/ptype.exp, gdb.t15/printcmds.exp:  When constructing
+	a long or float array cast all array members to the same type.
+        * gdb.t04/setvar.exp:  Handle the decimal output of an unsigned long
+	with 64 bit longs.
+        * gdb.t07/watchpoint.exp:  Add finish and until variations encountered
+	on alpha.
+        * gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Add xfails for alpha.
+
+Tue Sep 28 17:26:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24 (demangle.exp): Constructors of templates have names like
+	vector<int>::vector(int) not vector<int>::vector<int>(int).  See
+	section 14.6 of the ARM.
+
+	* gdb.t24 (demangle.exp): Remove a whole bunch of tests of the form
+	"_vt$MoveCmd"; these differ only in name from "_vt$foo", so they
+	accomplish little and slow down the testsuite.
+
+	* gdb.t24 (demangle.exp): Accept "XXX const" as well as "const XXX".
+	Accept spaces various places.
+
+Tue Sep 21 17:28:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t07/watchpoint.exp: On sparc, clear xfail for calling function
+	with watchpoint enabled.
+
+	* Makefile.in: Remove definition of CC and remove the second
+	definition of CXX (the "CXX = gcc" one remains).  These definitions
+	were causing backquotes to be expanded within backquotes, which
+	doesn't work.
+
+Sat Sep 18 09:43:21 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
+
+	* gdb.t17/callfuncs.exp: Add "return 0" to end.
+
+Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * gdb.stabs/ecoff.mt:  Remove STABSCC hack.
+        * gdb.stabs/weird.exp:  Handle the case where weird.o is compiled
+	by mips cc and contains no stabs entries.
+
+Thu Sep 16 17:22:12 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* config/vx-gdb.exp: Use fake device to load files rather than
+	NFS.
+	* lib/gdb.exp: New proc to do "file" command.
+	* config/unix-gdb.exp: Use new "file" proc.
+
+Thu Sep 16 13:45:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* config/mips-gdb.exp (gdb_load): Increase timeout to 2400.
+	Rework board rebooting slightly.
+	(gdb_exit): Don't exit from the remote shell; there isn't one.
+	* gdb.stabs/weird.exp: If a program is being debugged already,
+	kill it.
+	* gdb.t04/setvar.exp: Stop and restart gdb.
+	* gdb.t05/expr.exp: Likewise.
+	* gdb.t07/watchpoint.exp: If target is mips-idt-*, stop and
+	restart gdb and reload the program.
+	* gdb.t08/opaque.exp: Likewise.
+	* gdb.t12/scope.exp: Likewise.
+	* gdb.t13/bitfields.exp: Likewise.
+	* gdb.t15/funcargs.exp: Likewise.
+	* gdb.t20/classes.exp: Likewise.
+	* gdb.t03/ptype.exp: Increase timeout.
+	* gdb.t16/printcmds.exp (test_print_string_constants,
+	test_print_array_constants): Likewise.
+	* gdb.t17/callfuncs.exp (do_function_calls): Likewise.
+	* gdb.t20/classes.exp (do_tests): Likewise.
+	* gdb.t22/virtfunc.exp (test_virtual_calls): Likewise.
+
+Wed Sep 15 14:24:36 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* gdb.stabs: Renamed *wierd* to *weird*.
+
+Wed Sep 15 10:36:50 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* gdb.t13/bitfields.exp: Test for bad output rather than waiting
+	for timeout.  Add "known gcc 2.4.5 bug" to failure message.
+
+Tue Sep 14 17:16:44 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
+
+	* gdb.stabs/wierd.exp (print_wierd_var): Test size, not type name.
+	(do_tests): Remove xfail for whatis on one_var and two_var.
+
+Wed Sep  8 23:14:23 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* Makefile.in: Made cross building work better by adding
+	{RUNTEST,CC}_FOR_TARGET and using TARGET_FLAGS_TO_PASS.
+
+Tue Sep  7 14:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t15/{return.c,return.exp,Makefile.in}:
+	New test, currently commented out.
+
+Tue Aug 31 16:51:29 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* config/udi-gdb.exp: gdb_exit now kills any isstip processes
+	still running and removes the leftover named socket so GDb can do
+	clean restarts.
+
+Mon Aug 30 17:55:16 1993  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* gdb.t01/run.exp: Add match for VxWorks, cause I/O comes out the
+	console, not GDB.
+	* config/mt-*: Added default values for RUNTEST and RUNTESTFLAGS so
+	cross testing works better with "make check"
+	* config/unix-gdb: Use default procedures for exit and version.
+	* config/vx-gdb.exp: Cleaned up and massaged back to working order
+	with the newest VxWorks.
+
+Thu Aug 26 17:50:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t20/classes.exp: For "ptype class Base1", continue to accept
+	old form.
+
+	* gdb.t22/virtfunc.exp: If it prints `struct' (not `class') with a
+	name (e.g. devo gdb with gcc 2.4.5), it is still a pass.
+
+	* gdb.t10/crossload.exp: Skip whole file (for now, until we fix it).
+
+	* config/unix-gdb.exp: Remove this version of gdb_exit
+	* lib/gdb.exp: Merge in all the crap from config/unix-gdb.exp.
+	Rob says he'll look at it when he gets back to testing boards.
+
+Thu Aug 26 07:20:00 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* gdb.t22/virtfunc.exp:  Accept missing struct/class names as
+	an expected fail for certain ptype commands.
+
+	* gdb.t20/classes.exp:  Update expected results of "ptype class
+	Base1" to account for the constructor that now appears in the type.
+
+Wed Aug 25 16:48:05 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* configure.in (configdirs):  Restore gdb.t04, which mysteriously
+	disappeared from list.
+	* config/{udi-gdb.exp, gdb-unix.exp}:  Replace calls to obsolete
+	"alldone" proc with call to cleanup and exit.
+	* {gdb.t01/run.exp, gdb.t01/term.exp, gdb.t02/whatis.exp,
+	gdb.t03/ptype.exp, gdb.t04/setvar.exp, gdb.t05/expr.exp,
+	gdb.t06/break.exp, gdb.t07/watchpoint.exp, gdb.t08/opaque.exp,
+	gdb.t09/corefile.exp, gdb.t10/crossload.exp, gdb.t11/list.exp,
+	gdb.t12/scope.exp, gdb.t13/bitfields.exp}:  Replace calls to
+	"alldone" proc with simple returns that suppress remaining
+	tests.  The alldone proc went away many months ago.
+
+Tue Aug 24 11:04:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t10/nodebug.exp: Comment out "maint print msymbols" tests.
+
+	* gdb.t12/gdbme0.c (localscopes, autovars): Modify to foil gcc -O.
+
+Thu Aug 19 22:08:41 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t15/funcargs.exp:  Allow arguments for main in backtraces
+	as vax gdb will display them.
+
+Thu Aug 19 18:18:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t20/gdbme.cc: Do some calculation with v.x, to confound
+	optimizers.
+
+	* scope.exp: Change "bad value for localval" messages so each one
+	is unique.
+
+	* config/unix-gdb.exp (gdb_exit): Move info on this vs.
+	lib/gdb.exp (gdb_exit) from ChangeLog to comments.
+
+	* gdb.t06/signals.exp: Skip the whole file with xfail for delta68.
+
+Tue Aug 17 00:05:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/teststrategy.exp: Deal with it if cmdsize = 1 line
+	doesn't exist (due to optimization).
+
+Mon Aug 16 21:05:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/wierd.exp: Deal with it if echo of "file" command
+	contains \r because the filename is long.
+
+	* gdb.t06/signals.exp: Revise comments regarding "'next' behaved as
+	'continue'" bug, and change xfail back to i*86-univel-sysv4*.
+
+Mon Aug 16 03:05:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t00/help.exp, gdb.t02/whatis.exp, gdb.t07/watchpoint.exp,
+	gdb.t08/opaque.exp, gdb.t17/interrupt.exp:  Update for vax running
+	Ultrix.
+	* gdb.t02/whatis.exp:  Use procedure to setup xfails on long versus
+	int tests.
+	* gdb.t08/opaque.exp:  Use procedure to setup xfails for opaque tests.
+
+Thu Aug 12 15:24:28 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* Makefile.in (distclean):  Remove *.log *.plog *.sum *.psum site.*.
+
+	* gdb.t17/interrupt.exp:  Fix 'missing Continuing' case so pattern
+	to match does not match the passing case but still matches the 
+	failing case.
+
+Thu Aug 12 16:58:59 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (distclean): Remove *.plog *.sum *.psum site.*.
+
+Wed Aug 11 19:47:27 1993  John Gilmore  (gnu@rtl.cygnus.com)
+
+	* lib/gdb.exp (gdb_exit):  Move the best version of gdb_exit
+	to here.  Fix 'Quit anyway.*?' bug (? is a regexp metacharacter).
+	* config/{mips-gdb.exp, nind-gdb.exp, udi-gdb.exp, vx-gdb.exp}:
+	Remove various versions of gdb_exit.
+	* config/vx-gdb.exp:  Remove quit_vxgdb, change a caller to call
+	gdb_exit.
+	* config/unix-gdb.exp:  gdb_exit remains here, and should override
+	the generic version, since it's doing a lot of wierd stuff that
+	the other versions aren't.  FIXME, fold it in, or abandon this
+	version.
+
+Wed Aug 11 12:09:32 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Add tests for PR 3220.
+
+Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t24/demangle.exp: Add lucid test for __vtbl__3foo__vt_cc_main_.
+
+Tue Aug 10 15:45:25 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* gdb.t07/watchpoint.exp:  Clear xfail with "i*86-*-*", not just
+	"i386-*-*".  Works for i486 as well.
+
+	* gdb.t06/signals.exp:  Rework code that recognizes known SVR4
+	bug, and expand domain of xfail to all SVR4 systems, since the
+	actual problem is likely to be in generic SVR4 /proc support.
+
+Tue Aug 10 15:49:35 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/unix-gdb.exp (gdb_load): Add eof to expect statement.
+
+Tue Aug 10 09:56:56 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* gdb.t17/interrupt.exp:  Set up xfail for *-*-sysv4*, in chain of
+	xfails for other systems.  Match a missing 'Continuing.' as an
+	explicit fail for i*86-*-sysv4*, so it doesn't hose other tests.
+
+	* gdb.t20 {classes.exp, inherit.exp, misc.exp}, gdb.t21/cplusfuncs.exp,
+	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t31/chillvars.exp:
+	Only issue warning for missing executables if -all option is used.
+
+	* gdb.stabs/wierd.exp:  Only issue warning for missing wierd.o
+	file if -all option is used.  It's like an unpredictable XFAIL.
+
+Mon Aug  9 10:13:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t15/funcargs.exp: Add comments that hppa xfails are only
+	for dynamically linked binaries.
+
+	* gdb.t10/crossload.exp: Add `set gnutarget auto' at end of tests.
+
+Sun Aug  8 14:21:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t20/inherit.exp: Change message for "print tagless struct"
+	to state that this is a known bug in old versions of g++.
+
+Fri Aug  6 21:40:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t17/interrupt.exp:  Add xfail for 386 bsd. Accept echoed newline
+	while waiting for `Continuing'.
+
+Fri Aug  6 13:38:08 1993  Fred Fish  (fnf@deneb.cygnus.com)
+
+	* gdb.t10/nodebug.exp:  Expect to find local/global minimal symbols
+	in text, data, and bss.
+	* gdb.t10/nodebug.c:  Add local and global test variables for
+	initialized and uninitialized data.
+
+Thu Aug  5 12:18:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/unix-gdb.exp (gdb_exit): Add "wait".
+
+Thu Aug  5 18:14:06 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t06/signals.exp:  xfail the continue from the handler for all
+	targets.
+
+	* gdb.t07/watchpoint.exp:  clear_xfail for i386 when calling a
+	function with watchpoints enabled, the i386 call dummy starts with
+	a call.
+
+	* gdb.t00/teststrategy.exp, gdb.t09/Makefile.in:  Handle the way
+	386 bsd names its corefiles.
+
+Wed Aug  4 08:53:41 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t10/Makefile.in (nodebug.o):  Don't use "-c -o", many
+	compilers don't grok it.
+	* gdb.t16/gdbme.c (ctable1):  Initialize unsigned char array
+	with small octal ints rather than character constants, which
+	are signed and might not fit if first promoted to int.
+
+Tue Aug  3 18:28:25 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t09/Makefile.in (clean):  Remove corefile.
+
+Mon Aug  2 12:47:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t07/watchpoint.exp: Add missing `$prompt $'.
+
+Mon Aug  2 12:30:14 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  and Jim Kingdon (kingdon@cygnus.com)
+
+	* gdb.t06/signals.exp: Change xfail from "*-*-*" to be only for
+	NO_SINGLE_STEP machines.  Fix comment about its cause.  Uncomment
+	the `continue' test right after it (also xfailed if NO_SINGLE_STEP).
+
+Fri Jul 30 19:46:55 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t17/interrupt.exp: Add xfail for hppa.
+
+Fri Jul 30 12:54:11 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t08/opaque.exp,
+	gdb.t09/corefile.exp:  Cleanup xfails for fixed mips bugs.
+	* gdb.t13/bitfields.exp, gdbme.c:  Examine a variable in the inferior
+	to determine signed-ness of bitfields and use the result to setup
+	the xfail.
+	* gdb.t15/gdbme.c:  Add comments to the two indirect call0a lines.
+	* gdb.t15/funcargs.exp:  Use them to step until the second indirect
+	call line is reached if necessary.
+
+Thu Jul 29 20:33:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/wierd.exp: New test, for nameless baseclasses.
+
+Mon Jul 26 00:15:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/break.exp: Also test `clear' command.
+
+Wed Jul 21 18:03:38 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* gdb.t00/teststrategy.exp: Remove extra quote.
+
+	* gdb.t07/watchpoint.exp: Change xfail for calling function with
+	watchpoint enabled to be for all non-68k machines.
+
+	* gdb.t15/{mips_pro.{c,exp},Makefile.in}: New test.
+
+Mon Jul 19 23:59:26 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.stabs/configure.in: If configured -with-gnu-as for mips-*-*
+	targets use aout.mt instead of ecoff.mt as gas understands
+	standard aout format.
+
+Mon Jul 19 18:14:06 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* lib/gdb.exp (runto): Don't insist that function we are running to
+	was compiled with -g.
+
+	* gdb.t10/{nodebug.{c,exp},Makefile.in}: New test.
+
+	* gdb.t17/interrupt.exp: Before sending ^C, give the inferior time
+	to get back into the read system call.
+	Accept leading newline in case where we woke it up.
+
+Sun Jul 18 08:40:45 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.stabs/{ecoff.mt,wierd-ecoff.S,wierd-ecoff.sed}:  New files
+	to make the stabs test work on ecoff systems using gcc and -with-stabs.
+	* gdb.stabs/{Makefile.in,configure.in,aout.mt,xcoff.mt}:  Modify to
+	enable ecoff configuration.
+
+Thu Jul 15 11:54:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t15/funcargs.exp (localvars_in_indirect_call): New test.
+
+Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t16/printcmds.exp: Add another printf test.
+
+Wed Jul 14 15:37:13 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* configure.in: If configured -with-stabs on any target, add
+	stabsdirs to configdirs.
+
+Wed Jul 14 09:36:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t16/printcmds.exp: Change printf "%f\n" to printf "%f is
+	fun" so pattern does not match the command itself.
+
+Mon Jul 12 11:22:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t15/{gdbme.c,funcargs.exp}: Test for alloca-influenced frames.
+
+Sun Jul 11 12:03:24 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t17/interrupt.exp: Test for more things.
+
+Fri Jul  9 14:11:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t07/watchpoint.exp: In until test, deal with the way the DEC
+	compiler arranges the code and line numbers.
+
+	* gdb.t17/interrupt.exp: Don't send \n after ^C.
+
+Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t00/help.exp:  Increase expect input buffer size.
+
+Thu Jul  8 14:26:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.exp: Remove sparc xfail; bug fixed.
+
+	* gdb.t07/watchpoint.exp: Add xfail for hppa.
+
+	* gdb.t17/{gdbme.c,callfuncs.exp}: Add sum10 function, to test pa bug.
+
+	* gdb.t06/signals.exp: At "p func1 ()" test, check for breakpoint
+	[0-9]*, not just [0-9].
+
+Wed Jul  7 17:52:28 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t20/{gdbme.cc,classes.exp}: Add xfail for gdb/2972.
+
+	* gdb.t2*: Set CXXFLAGS, not CFLAGS, since that's what we use.
+
+Tue Jul  6 13:54:49 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/help.exp: Replace most of docstring for "continue" with .*.
+
+Mon Jul  5 22:03:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.c: Add xfails for sun3.
+
+	* gdb.t07/watchpoint.exp: Comment out xfail for fixed bug 1836.
+
+	* gdb.t07/{gdbme.c,watchpoint.exp}: Add test for 2597.  Also add
+	test_stepping tests.
+
+Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t{06,17}/Makefile.in (clean): Remove all executables.
+
+	* gdb.t17/{interrupt.{c,exp},Makefile.in}: New test for solaris bug.
+
+	* gdb.t06/twice.exp, Makefile.in: Just use an include of twice.c
+	rather than actually putting it through cpp twice.
+
+	* gdb.t06/signals.exp: Add xfails for unixware and rs6000.
+
+Fri Jul  2 10:48:03 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* config/mips-gdb.exp (gdb_exit): Removed close statement which is
+	no longer needed.
+
+Fri Jul  2 09:08:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t06/signals.exp: Add test for sparc bug with do_save_insn.
+
+	* gdb.t20/{classes,inherit}.exp: If a class which doesn't use any
+	C++ features prints as "struct", make it a pass, not an xfail.
+
+Thu Jul  1 22:03:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t22/virtfunc.exp: Remove a bunch of xfails.
+	Don't require VA to print as "class" rather than "struct".
+
+Thu Jul  1 18:27:40 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.t06/twice.exp: Don't care about the file name GDB prints.
+
+Wed Jun 30 18:01:00 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t{02,13}/comp-info.c, gdb.t06/twice.exp: Add "return 0" to end.
+
+Tue Jun 29 13:15:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t12/scope.exp:  Remove xfail for parameter printing in wrong
+	order.
+
+Tue Jun 29 09:22:29 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t16/printcmds.exp: Add printf tests.
+
+	* gdb.t06/{twice.{c,exp},Makefile.in}: New test.
+
+	* gdb.t10/Makefile.in (clean): Remove $(EXECUTABLES) too.
+
+Mon Jun 28 11:25:59 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t20/classes.exp:  Add clear_xfail's before printing summary
+	pass counts, to counteract any existing or future setup_xfails.
+
+Mon Jun 28 09:15:17 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/wierd{.def,-aout.S,-xcoff.S}: Use new macros
+	{BEGIN,END}_COMMON for common block instead of STAB.
+	* gdb.stabs/wierd.exp: Add xfail for rs6000.
+
+	* gdb.stabs/wierd.def: Make value of N_GSYM's 0.
+	intp_var should be N_GSYM not N_LSYM.
+	wierd-aout.S: Use a label for the value of the N_SO.
+	wierd.def: Remove all backslashes.
+	wierd-{aout,xcoff}.S: Put a few tests with backslashes here.
+
+Mon Jun 28 07:21:51 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t20/gdbme.cc (main): Move variable initialization for AIX to
+	get the expected next to inheritance3.
+
+Sun Jun 27 12:29:53 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t00/teststrategy.exp: Remove expected failure for mips-*-*
+	now that gcc-2.4 gets it right.
+
+Fri Jun 25 12:00:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.stabs/wierd{.def,.exp,-aout.S,-xcoff.S}: Add common block test.
+
+	* gdb.t{02,13}/{Makefile.in,gdbme.c,comp-info.c}: New way of
+	generating comp-info.exp which works for cross-compilation.
+
+Thu Jun 24 16:55:05 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t11/list.exp:  For SVR4 xfails, match "*-*-sysv4*", not
+	"*-*-sysv4.*".
+
+Tue Jun 22 21:17:26 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t01/run.exp:  Start with a fresh gdb.
+	* gdb.t11/list.exp:  For SVR4 xfails, match on all versions of
+	SVR4.x.
+
+Mon Jun 21 15:23:22 1993  Fred Fish  (fnf@cygnus.com)
+
+	* {gdb.t01, gdb.t02, gdb.t03, gdb.t04, gdb.t05, gdb.t06, gdb.t07,
+	gdb.t08, gdb.t09, gdb.t10, gdb.t11, gdb.t12, gdb.t13, gdb.t15,
+	gdb.t16, gdb.t17, gdb.t20, gdb.t21, gdb.t22, gdb.t23, gdb.t30}/
+	Makefile.in (distclean, realclean):  Remove gdbme.c from list of
+	things to remove.
+
+Sat Jun 19 07:49:10 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t24/demangle.exp (test_gnu_style_demangling):  Add some new
+	test cases from bug reports.
+
+Fri Jun 18 10:38:49 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t06/break.exp:  Add xfails for sparc-sun-solaris2.*.
+	* gdb.t12/scope.exp:  Add clear_xfails at appropriate places to
+	  avoid spurious xfails.
+	* gdb.t20/classes.exp:  Add xfails for longstanding C++ problems.
+	* gdb.t21/cplusfuncs.exp:  Add xfails for sparc-sun-solaris2.*.
+	* gdb.t22/virtfunc.exp:  Add xfails for longstanding C++ problems.
+
+Wed Jun 16 10:11:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/teststrategy.exp:  Rework to provide more useful
+	description of each test, fix problem with systems that define
+	ALIGN_STACK_ON_STARTUP code, other misc cleanups.
+	* gdb.t06/break.exp (test_next_with_recursion):  Fix expected
+	results for "next over recursive call" so timeouts aren't taken
+	by error.
+
+Mon Jun 14 09:09:04 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.t12/scope.exp: Test printing of variables before run.
+
+	* gdb.t12/{gdbme0.c,scope.exp}: Test for bug where parameters are
+	printed in wrong order due to sorting.
+
+Sat Jun 12 15:03:58 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/teststrategy.exp:  Fix expected results for printing
+	user entered string constant.  Is array of char, prints with no
+	address.
+
+	* gdb.t00/{default.exp, help.exp}:  Account for changes to radix
+	commands.
+	* gdb.t16/gdbme.c:  Add and use struct containing arrays of char.
+	* gdb.t16/printcmds.exp:  Fix all lines that match "unsigned char *".
+	* gdb.t16/printcmds.exp (test_print_char_arrays):  Test printing
+	of struct of char arrays.
+	* gdb.t00/radix.exp:  New tests for radix commands.
+
+Fri Jun 11 13:12:27 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.t16/printcmd.exp: Print a variable before running program
+	(with xfail for AIX).
+
+Thu Jun 10 11:04:04 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.t06/{signals.exp,signals.c,Makefile.in}: New test.
+
+	* gdb.t16/printcmd.exp: Don't print variables before running program.
+
+	* gdb.t06/break.exp: Don't require envp argument to main.
+
+	* gdb.t0{2,3,4,5}/gdbme.c [_AIX]: Use signed keyword.
+
+	* gdb.t02/whatis.exp, gdb.t11/list.exp:
+	Add xfails for rs6000.
+
+	* gdb.t02/whatis.exp: Change other tests not to re-test something
+	we already tested.
+
+	* gdb.t{03,15,16}/gdbme.c: Reference all variables and make sure
+	each type used has a variable of that type.
+
+Tue Jun  8 16:45:20 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* gdb.t20/{inherit.exp,gdbme.cc}: Test tagless structure.
+
+Fri Jun  4 11:07:19 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
+
+	* configure.in: change srctrigger to be a file, not a directory
+
+Fri Jun  4 08:23:57 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* configure.in (mips-idt-ecoff*): Added trailing '*'.
+
+	* gdb.t11/list.exp: Fixed a couple of typos.
+
+Tue Jun  1 21:28:06 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00 (teststrategy.exp):  Remove notice about PR 1823.  Bug
+	is fixed and PR is closed.
+	* gdb.t16 (gdbme.c):  Add simple test string variable.
+	* gdb.t16 (printcmds.exp):  Add tests with simple test string
+	variable, primarily for boundaries on "set print elements".
+
+Mon May 31 11:36:08 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.stabs/wierd.exp: Remove xfail for printing big integer.
+	Make leading 0's optional and don't expect a tab in the middle
+	of the number.
+
+	* gdb.t00/teststrategy.exp: Remove xgdb before trying the copy.
+
+	* gdb.stabs/wierd.def: Type attributes must be preceded by number=.
+	* gdb.stabs/wierd.exp: Remove xfails for type attributes.  Also
+	don't end command passed to gdb_test with newline.
+
+	* gdb.t13/{Makefile.in,gdbme.c,bitfields.exp}: If we #defined the
+	signed keyword away, don't expect signed bitfields to be signed.
+
+	* gdb.t13/bitfields.exp (bitfield containment): Accept the fields
+	printing with only as many 1's as are in the field as well as printing
+	with 32 1's (see comment).
+
+Sat May 29 17:57:01 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/default.exp:  Start with a fresh gdb.
+	* configure.in (configdirs):  Remove gdb.t31 until the chill
+	compiler works again.  It no longer is able to find chillrt0
+	since it isn't in libchill.a anymore.
+	* gdb.stabs/wierd.exp:  Rewrite to properly handling a missing
+	wierd.o, make more modular.
+	* gdb.stabs/wierd.def (bad_neg0type, bad_neg0const):  Remove
+	spurious newlines that caused problems.
+
+Wed May 26 09:57:19 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Move test with enums and partial symbols from gdb.t03/ptype.exp
+	to gdb.stabs/wierd.exp since GCC has worked around the bug.
+	gdb.stabs/wierd.{exp,def}: Many new tests.
+
+	* gdb.t00/default.exp: update info line for new message.
+
+	* gdb.t02/{whatis.exp,gdbme.c}:
+	Test that "char *" doesn't print as "caddr_t".
+
+Tue May 25 13:28:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t00/help.exp: Use .* in place of some help messages which
+	just changed.
+	gdb.t00/default.exp: Update "info frame" test for new message.
+	* gdb.stabs/wierd.exp: Check for eof, directly or via gdb_test.
+	Remove some xfails
+
+Mon May 24 00:24:47 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdb.t03/{gdbme.c,ptype.exp}:
+	Add tests for typedef'd struct and union without tags.
+	Also check "whatis" on a variable of a typedef'd enum without a tag.
+
+	* gdb.t00/teststrategy.exp: For p "foo", remove sun4 XFAIL (see
+	PRMS 1823; the bug still exists but isn't reproduced by this test
+	anymore), and remove rs6000 XFAIL (the bug is fixed).
+
+	* gdb.t03/ptype.exp: Comment out a lot of tests which are basically
+	duplicated from whatis.exp.  For those that are left, accept
+	"long", "long int", or "int" for long variables (whatis.exp already
+	has an XFAIL for "int", so no need to fail it here).
+
+	* gdb.t02/whatis.exp, gdb.t10/crossload.exp:
+	Deal with GCC's names for types now that GDB uses the compiler's names.
+
+	* gdb.t02/{Makefile.in,gdbme.c,whatis.exp}:  If not GCC, do some
+	setup_xfail's for sunos4.  If we #defined the signed keyword away,
+	don't expect GDB to know that char it is signed.
+
+	* gdb.t00/teststrategy.exp: Update for symbolic signal names.
+
+Sun May 23 08:44:55 1993  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in (configdirs):  Add gdb.t24 for C++ tests that
+	should work on any system, regardless of debugging format.
+	* gdb.t21/demangle.exp:  Move to gdb.t24.
+	* gdb.t24/demangle.exp:  Move from gdb.t21.
+	* gdb.t24/{Makefile.in, configure.in}:  New files.
+
+Thu May 20 19:39:03 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Do gdb.stabs and C++ tests only for stabs.
+	* gdb.stabs: New directory.
+
+Tue May 18 21:12:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/{mips,nind,udi,unix,vx}-gdb.exp: Look for "Quit anyway.*?"
+	not just "Quit anyway?".
+
+Tue May 18 17:13:20 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t21/demangle.exp:  Add a couple of new patterns.  Ensure
+	that all setup_xfails are immediately followed by clear_xfails.
+
+Tue May 11 09:10:47 1993  Fred Fish  (fnf@cygnus.com)
+
+	* config/unix-gdb.exp, gdb.t00/echo.exp, gdb.t00/help.exp,
+	gdb.t00/teststrategy.exp, gdb.t00/gdbvars.exp, gdb.t01/run.exp,
+	gdb.t01/term.exp, gdb.t02/whatis.exp, gdb.t03/ptype.exp,
+	gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t06/break.exp,
+	gdb.t07/watchpoint.exp, gdb.t08/opaque.exp, gdb.t09/corefile.exp,
+	gdb.t10/crossload.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
+	gdb.t13/bitfields.exp, gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
+	gdb.t17/callfuncs.exp, gdb.t20/misc.exp, gdb.t20/inherit.exp,
+	gdb.t20/classes.exp, gdb.t21/demangle.exp, gdb.t21/cplusfuncs.exp,
+	gdb.t22/virtfunc.exp, gdb.t23/templates.exp, gdb.t30/chexp.exp,
+	gdb.t31/chillvars.exp, lib/gdb.exp:
+	Change place to report bugs from bug-dejagnu@prep.ai.mit.edu to
+	bug-gdb@prep.ai.mit.edu.
+
+Fri May  7 09:15:35 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t17/callfuncs.exp (do_function_calls):  Call t_double_values
+	with 0.0, not integer 0.
+
+Fri Apr 30 13:17:24 1993  Jim Kingdon  (kingdon@cygnus.com)
+
+	* gdb.t06/break.exp: Update for "Kill the program" message change.
+
+Fri Apr 30 09:42:57 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (GDBFLAGS):  Set to -nx.
+	* Makefile.in (site.exp):  Use GDBFLAGS.
+
+Wed Apr 28 13:19:07 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	* */Makefile.in (CFLAGS): add CFLAGS = -g to all subdirectory
+	  Makefiles.
+	  (check): depend on just-check.
+	  (just-check): added so that tests can be run without a noop
+	  build pass.
+
+Fri Apr 23 18:13:28 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
+
+	Switch to using configure's configdirs.
+	* Makefile.in (Makefile): add configure.in dependency.
+	  (SUBDIRS): removed redundant assignment.
+	* configure.in: switch subdirs assignment to configdirs.
+	* gdb.t*/configure.in: new files.
+
+Thu Apr 22 08:27:53 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* gdb.t07/watchpoint.exp: Removed a29k expected failure which now
+	works.
+
+Tue Apr 20 13:38:40 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.{t20,t21,t22,t23}/Makefile.in:  Use $(srcdir) to avoid $<
+	in explicit rules.  Apparently this is not supported by some makes.
+
+Mon Apr 19 01:54:53 1993  John Gilmore  (gnu@cygnus.com)
+
+	* gdb.t31/Makefile.in:  Use $(srcdir) when avoiding $<, sigh.
+
+Fri Apr 16 09:33:46 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/unix-gdb.exp:  Add back missing return 0 which mysteriously
+	disappeared.
+
+Thu Apr 15 02:28:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)
+
+	* gdb.t31/Makefile.in:  Avoid $< in explicit rule.
+
+Wed Apr 14 16:38:47 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t07/watchpoint.exp:  Remove setup_xfail for i486
+	watchpoint problem that is now fixed.
+	* gdb.t30/chexp.exp:  Remove setup_xfail for printing
+	uninitialized convenience variables.
+	* gdb.t31/chillvars.exp:  Fix expected patterns for printing
+	structures.
+
+Wed Apr 14 12:55:58 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t00/help.exp: Compensate for bug in mips-*-ultrix* OS
+	which causes expect to get out of sync with gdb on long output
+	from help set.
+	* gdb.t09/corefile.exp: Make expected pattern for core file
+	failing signal and frame output format less sun specific.
+
+Tue Apr 13 23:18:07 1993  Per Bothner  (bothner@cygnus.com)
+
+	* gdb.t31/chillvars.exp:  Add and remove initial dummy
+	breakpoint, so that symbol table is forced in.
+	(Needed at least on Sunos4, though it seems not SVR4.)
+	* gdb.t31/chillvars.exp:  Update for changed output format.
+
+Sun Apr 11 17:21:45 1993  Rob Savoye  (rob at darkstar.cygnus.com)
+
+        * config/unix-gdb.exp: Gracefully exits if $GDB is a bogus path.
+
+Wed Apr  7 21:28:21 1993  Rob Savoye  (rob@cygnus.com)
+
+	* Makefile.in: Added --srcdir when invoking runtest, removed the
+	need for a local config file. (optional now)
+
+Wed Apr  7 14:13:41 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t21/demangle.exp:  Only count real fails (not xfails) for
+	failure count used to force early termination.  Add some more
+	expected failures for gnu style demangling.
+
+Thu Apr  1 09:50:30 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* Makefile.in (CXXFLAGS): Remove -O. It caused the debug info for the
+	pmi variable from gdb.t20/gdbme to get optimized away.
+	* gdb.t00/teststrategy.exp: Added expected failure for mips-*-*.
+	Check for written corefile upon timeout _and_ eof.
+
+Tue Mar 30 09:58:16 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/unix-gdb.exp:  Add missing return 0.
+
+Tue Mar 30 08:34:25 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* gdb.t16/printcmds.exp:  Remove misplaced xfail that caused an early
+	test termination.
+
+Mon Mar 29 17:37:25 1993  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in (subdirs):  Put back gdb.t17 which mysteriously
+	disappeared.
+
+Thu Mar 25 21:05:16 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t10/crossload.exp:  Disable the i860-elf test until such
+	time as i860 support works.
+
+	* gdb.t15/funcargs.exp:  Fix expected outputs to include 
+	"backtrace 100\r" rather than just "backtrace\r", to match last
+	change.
+
+Thu Mar 25 12:14:28 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* config/udi-gdb.exp (gdb_exit): Remove close command.
+	(gdb_target_udi): New procedure to set the UDI target.
+	(gdb_start): Don't remove *_soc files.  Use gdb_target_udi.
+	* gdb.t00/default.exp: Added expected failures for a29k-*-udi.
+	Added waits for prompts after several question responses.  Added
+	some more responses used by a29k-amd-udi-gdb.
+	* gdb.t01/run.exp, gdb.t06/break.exp: Added a29k-*-udi support:
+	pass different arguments, restart UDI connection after program
+	completion.
+	* gdb.t02/whatis.exp, gdb.t03/ptype.exp, gdb.t07/watchpoint.exp,
+	gdb.t08/opaque.exp, gdb.t11/list.exp, gdb.t12/scope.exp,
+	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp, gdb.t20/misc.exp,
+	gdb.t21/cplusfuncs.exp: Added expected failures for a29k-*-*.
+	* gdb.t04/setvar.exp, gdb.t05/expr.exp, gdb.t07/watchpoint.exp,
+	gdb.t08/opaque.exp, gdb.t12/scope.exp, gdb.t13/bitfields.exp,
+	gdb.t15/funcargs.exp, gdb.t16/printcmds.exp,
+	gdb.t17/callfuncs.exp, gdb.t20/classes.exp, gdb.t20/inherit.exp,
+	gdb.t20/misc.exp, gdb.t22/virtfuncs.exp: Restart UDI connection
+	after program completion.
+	* gdb.t10/crossload.exp: Does not work for a29k-*-*, since BFD is
+	compiled with a SELECT_VECS setting.
+	* gdb.t15/funcargs.exp: Use argument to backtrace to prevent
+	infinite recursion.
+
+	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t22/virtfuncs.exp:
+	Added checks for COFF results, and made them expected failures for
+	all targets.  It would be better to make them expected failures
+	for COFF targets only.
+
+Wed Mar 24 14:43:38 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
+
+	* Makefile.in: add null dvi target, don't bother to recurse
+	through test directories for info and install-info; rename
+	$(datadir) to be dejagnu instead of deja-gnu
+
+Wed Mar 24 09:48:03 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t31/gdbme.ch:  Re-enable code that previously caused
+	compiler to coredump.
+	* gdb.t31/chillvars.exp:  Re-enable tests that depend on that
+	code.
+
+Tue Mar 23 08:53:42 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t31/gdbme.ch:  Comment out code that causes chill compiler
+	coredump.
+	* gdb.t31/chillvars.exp:  Comment out tests that depend on that
+	code.
+
+Sun Mar 21 17:56:47 1993  Rob Savoye  (rob at darkstar.cygnus.com)
+
+	* gdb.t03/ptype.exp: tests for return code from gdb_test.
+	* gdb.t00/teststrategy.exp: Uses which proc rather than spawning
+	which in a shell. Deletes xgdb when done.
+	* config/unix-gdb.exp: Won't try to spawn $GDB unless it exists.
+	Tests the return from the "set height" or "set width" commands.
+	Added a few return codes where needed.
+
+Wed Mar 17 11:31:01 1993  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (SUBDIRS):  Add gdb.t17.
+	* configure.in (subdirs):  Add gdb.t17.
+	* gdb.t17/{Makefile.in, callfuncs.exp, gdbme.c}:  New test
+	files to test gdb's calling of functions in the inferior with
+	the correct arguments and gdb's ability to retrieve any
+	result returned.
+
+Tue Mar 16 15:37:11 1993  Fred Fish  (fnf@cygnus.com)
+
+	* config/unix-gdb.exp (gdb_exit):  Remove close commands that
+	may be called after gdb goes away.  Previous versions of expect
+	needed these to avoid file descriptor leaks, but they cause
+	errors with the current revision of expect.
+	* gdb.t00/gdbvars.exp:  Use -re on expected output after
+	setting sevenbit-strings.
+	* gdb.t04/setvar.exp, gdb.t13/bitfields.exp:  Make commands
+	to set sevenbit-strings consistent across tests.
+	gdb.t30/chexp.exp, gdb.t31/chillvars.exp:  Make commands to
+	set sevenbit-strings consistent across tests.
+
+Fri Mar 12 08:47:20 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t21/demangle.exp (proc demangle):  Adjust quotes in an
+	expected output to match current "expect" expectations.
+
+Wed Mar 10 18:01:49 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/default.exp:  Change expected output for default "source"
+	command, to match new gdb behavior which requires a filename to
+	source.
+
+Tue Mar  9 11:00:56 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t07/watchpoint.exp (test_simple_watchpoint):  Set up
+	expected fail for i486-*-* that misses the marker2 function.
+	* gdb.t10/crossload.exp (bfddefault):  Allow successful
+	recognition of a format to pass even if no symbols are found.
+	Explicitly catch failures where the format is not recognized
+	or is ambiguous, and add the reason to the fail message.
+	* gdb.t10/crossload.exp (bfdexplicit):  Catch failure where
+	the cause is and invalid target and add reason to failure message.
+	* gdb.t10/crossload.exp:  Fix bfd target names for elf32-m68k,
+	elf32-i386, elf32-sparc, and elf32-i860.
+	* gdb.t12/scope.exp (test_at_main, test_at_foo, test_at_bar):
+	Set up expected failure for 'filename'::variable scope resolution,
+	which is now apparently broken on all targets.
+	* gdb.t20/classes.exp, gdb.t20/inherit.exp, gdb.t20/misc.exp,
+	gdb.t21/cplusfuncs.exp, gdb.t22/virtfunc.exp,
+	gdb.t23/templates.exp:   Change failure for missing binfile into
+	just a warning.
+	gdb.t21/demangle.exp:  Change all cfront references to 'arm'
+	references.
+
+Mon Mar  8 19:20:28 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/default.exp:  Add expected output for default "source"
+	command, to match new gdb behavior.
+	* gdb.t09/corefile.exp:  Use GDBFLAGS when spawning GDB.
+
+Sun Mar  7 15:14:09 1993  Rob Savoye  (rob@cygnus.com)
+
+	* config/*-gdb.exp: returns an error, rather than exiting on
+	internal errors.
+
+Tue Mar  2 18:09:32 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t03/gdbme.c:  Add pointer to struct variable.
+	* gdb.t03/ptype.exp:  Test equivalence of '.' and '->' for
+	referencing struct members.
+
+Thu Feb 25 10:39:06 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* configure.in (mips-idt-ecoff): New target.
+	* config/mips-gdb.exp: New file for remote board using MIPS remote
+	debugging protocol.
+
+	* Redid configuration scheme.  Removed gdb.t*/configure.in.
+	Renamed gdb.t*/in-gdbme* to gdb.t*/gdbme*.  Changed to use CC, CXX
+	instead of CC_FOR_TARGET, CXX_FOR_TARGET.  Added mostlyclean and
+	distclean targets.  Built executables via .o files.  Adjusted
+	tests to account for source files in $(srcdir) rather than
+	$(objdir).
+	* lib/gdb.exp (runto): Don't expect () after the function name,
+	because it may have arguments.
+
+Wed Feb 24 08:05:38 1993  Ian Lance Taylor  (ian@cygnus.com)
+
+	* gdb.t00/default.exp, gdb.t01/run.exp, gdb.t02/whatis.exp,
+	gdb.t03/ptype.exp, gdb.t06/break.exp, gdb.t12/scope.exp: Added
+	expected failures for mips-idt-* and mips-sgi-*.
+	* gdb.t00/default.exp (attach): Kill process if requested.
+	* gdb.t00/help.exp (help target core, help target): Accept a gdb
+	that does not read core files.
+	* gdb.t01/run.exp: Removed checks for exit status code.
+	* gdb.t03/in-gdbme.c: Make explicit call to malloc to ensure that
+	it is linked in.
+	* gdb.t03/ptype.exp: Increase timeout when calling malloc.
+	* gdb.t04/setvar.exp, gdb.t05/expr.exp: Use runto function where
+	appropriate, rather than doing it by hand.
+	* gdb.t07/watchpoint.exp: If mips-idt-*, reload file after first
+	execution.
+	* gdb.t10/crossload.exp: Kill existing program if needed.
+	* gdb.t15/funcargs.exp: Use delete_breakpoints function where
+	appropriate, rather than doing it by hand.  Always increase
+	timeout for this test, not just for VxWorks.
+
+Wed Feb 24 08:03:38 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t31/chillvars.exp (test_structs):  New proc to test printing
+	of Chill STRUCT types and STRUCT values.
+	* gdb.t31/chillvars.exp (test_strings):  Expect "CHAR" now, rather
+	than "char".
+	* gdb.t31/in-gdbme.ch (simple_struct, nested_struct, struct1,
+	struct2):  New struct definitions and initializations to test 
+	simple Chill STRUCT types.
+
+Tue Feb 23 11:55:06 1993  Fred Fish  (fnf@cygnus.com)
+
+	* gdb.t00/teststrategy.exp:  Track reversion in gdb to not print
+	the null byte at the end of strings.
+	* gdb.t00/default.exp:  Make show version insensitive to copyright
+	date.
+	* gdb.t16/in-gdbme.c (ctable1, ctable2):  Make explicitly unsigned
+	to avoid dependencies on target char signedness.
+	* gdb.t16/printcmds.exp:  Update expected results for explicitly
+	unsigned char.
+	* gdb.t16/printcmds.exp:  Remove setup_xfails for i960 that should
+	now work.
+	* gdb.t21/demangle.exp:  Add many more patterns for template
+	demangling, most of them being expected failures.
+	* gdb.t21/demangle.exp (proc demangle):  Quote the demangled
+	string we are matching for, to match on the whole string.
+	* gdb.t21/demangle.exp:  Add many new test strings to demangle,
+	and fix a whole bunch that had incorrect expected output but were
+	passing anyway because of the bug in "proc demangle".
+	* gdb.t31/chillvars.exp:  Remove setup_xfail for printing string
+	type.
+	* gdb.t31/in-gdbme.ch:  Uncomment string4, now compiles.
+
+Mon Feb 22 07:54:03 1993  Mike Werner  (mtw@poseidon.cygnus.com)
+
+        * gdb/testsuite: made modifications to testcases, etc., to allow
+        them to work properly  given the reorganization of deja-gnu and the
+        relocation of the testcases from deja-gnu to a "tool" subdirectory.
+
+Sun Feb 21 10:55:55 1993  Mike Werner  (mtw@poseidon.cygnus.com)
+
+	* gdb/testsuite: Initial creation of gdb/testsuite.
+	Migrated dejagnu testcases and support files for testing nm to
+	gdb/testsuite from deja-gnu.  These files were moved "as is"
+	with no modifications.  This migration is part of a major overhaul
+	of dejagnu.  The modifications to these testcases, etc., which
+	will allow them to work with the new version of dejagnu will be
+	made in a future update.
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End:
diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in
new file mode 100644
index 0000000..d763450
--- /dev/null
+++ b/gdb/testsuite/Makefile.in
@@ -0,0 +1,187 @@
+# Makefile for regression testing the GNU debugger.
+# Copyright (C) 1992, 1993, 1994, 1995, 1999 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# GDB is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GDB is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+VPATH = @srcdir@
+srcdir = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+program_transform_name = @program_transform_name@
+build_canonical = @build@
+host_canonical = @host@
+target_canonical = @target@
+target_cpu = @gdb_target_cpu@
+
+SHELL = @SHELL@
+SUBDIRS = @subdirs@
+RPATH_ENVVAR = @RPATH_ENVVAR@
+
+EXPECT = `if [ -f $${rootme}/../../expect/expect ] ; then \
+          echo $${rootme}/../../expect/expect ; \
+          else echo expect ; fi`
+
+RUNTEST = $(RUNTEST_FOR_TARGET)
+
+RUNTESTFLAGS =
+
+RUNTEST_FOR_TARGET = `\
+  if [ -f $${srcdir}/../../dejagnu/runtest ]; then \
+    echo $${srcdir}/../../dejagnu/runtest; \
+  else \
+    if [ "$(host_canonical)" = "$(target_canonical)" ]; then \
+      echo runtest; \
+    else \
+      t='$(program_transform_name)'; echo runtest | sed -e '' $$t; \
+    fi; \
+  fi`
+
+#### host, target, and site specific Makefile frags come in here.
+
+# The use of $$(x_FOR_TARGET) reduces the command line length by not
+# duplicating the lengthy definition.
+
+TARGET_FLAGS_TO_PASS = \
+        "prefix=$(prefix)" \
+        "exec_prefix=$(exec_prefix)" \
+        "against=$(against)" \
+        'CC=$$(CC_FOR_TARGET)' \
+        "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+        "CFLAGS=$(TESTSUITE_CFLAGS)" \
+        "CHILLFLAGS=$(CHILLFLAGS)" \
+        'CHILL=$$(CHILL_FOR_TARGET)' \
+        "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
+        "CHILL_LIB=$(CHILL_LIB)" \
+        'CXX=$$(CXX_FOR_TARGET)' \
+        "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
+        "CXXFLAGS=$(CXXFLAGS)" \
+        "MAKEINFO=$(MAKEINFO)" \
+        "INSTALL=$(INSTALL)" \
+        "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+        "INSTALL_DATA=$(INSTALL_DATA)" \
+        "LDFLAGS=$(LDFLAGS)" \
+        "LIBS=$(LIBS)" \
+        "RUNTEST=$(RUNTEST)" \
+        "RUNTESTFLAGS=$(RUNTESTFLAGS)"
+
+all:
+	@echo "Nothing to be done for all..."
+
+.NOEXPORT:
+INFODIRS=doc
+info:
+install-info:
+dvi:
+
+install:
+
+uninstall: force
+
+site.exp: ./config.status Makefile
+	@echo "Making a new config file..."
+	-@rm -f ./tmp?
+	@touch site.exp
+	-@mv site.exp site.bak
+	@echo "## these variables are automatically generated by make ##" > ./tmp0
+	@echo "# Do not edit here. If you wish to override these values" >> ./tmp0
+	@echo "# add them to the last section" >> ./tmp0
+	@echo "set host_alias $(host_alias)" >> ./tmp0
+	@echo "set host_triplet ${host_canonical}" >> ./tmp0
+	@echo "set target_alias $(target_alias)" >> ./tmp0
+	@echo "set target_triplet ${target_canonical}" >> ./tmp0
+	@echo "set build_triplet ${build_canonical}" >> ./tmp0
+	@echo "set srcdir ${srcdir}" >> ./tmp0
+	@echo "set tool gdb" >> ./tmp0
+	@echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0
+		@cat ./tmp0 > site.exp
+	@cat site.bak | sed \
+			-e '1,/^## All variables above are.*##/ d' >> site.exp
+	-@rm -f ./tmp?
+
+installcheck:
+
+check: site.exp all just-check
+
+just-check:
+	rootme=`pwd`; export rootme; \
+	srcdir=${srcdir} ; export srcdir ; \
+	EXPECT=${EXPECT} ; export EXPECT ; \
+        $(RPATH_ENVVAR)=$$rootme/../../expect:$$rootme/../../libstdc++:$$rootme/../../tk/unix:$$rootme/../../tcl/unix:$$rootme/../../bfd:$$rootme/../../opcodes:$$$(RPATH_ENVVAR); \
+	export $(RPATH_ENVVAR); \
+	if [ -f $${rootme}/../../expect/expect ] ; then  \
+	  TCL_LIBRARY=$${srcdir}/../../tcl/library ; \
+	  export TCL_LIBRARY ; fi ; \
+	$(RUNTEST) $(RUNTESTFLAGS) 
+
+subdir_do: force
+	@for i in $(DODIRS); do \
+		if [ -d ./$$i ] ; then \
+			if (rootme=`pwd`/ ; export rootme ; \
+			    rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
+				cd ./$$i; \
+				$(MAKE) $(TARGET_FLAGS_TO_PASS) $(DO)) ; then true ; \
+			else exit 1 ; fi ; \
+		else true ; fi ; \
+	done
+
+force:;
+
+subdirs:
+	for dir in ${SUBDIRS} ; \
+	do \
+		echo "$$dir:" ; \
+		if [ -d $$dir ] ; then \
+			(rootme=`pwd`/ ; export rootme ; \
+			 rootsrc=`cd $(srcdir); pwd`/ ; export rootsrc ; \
+			 cd $$dir; $(MAKE) $(TARGET_FLAGS_TO_PASS)); \
+		fi; \
+	done
+
+clean mostlyclean:
+	-rm -f *~ core *.o a.out xgdb *.x *.grt
+	if [ x"${SUBDIRS}" != x ] ; then \
+	    for dir in ${SUBDIRS}; \
+	    do \
+		    echo "$$dir:"; \
+		    if [ -d $$dir ]; then \
+			    (cd $$dir; $(MAKE) clean); \
+		    fi; \
+	    done ; \
+	else true; fi
+
+distclean maintainer-clean realclean: clean
+	-rm -f *~ core
+	-rm -f Makefile config.status *-init.exp
+	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
+	if [ x"${SUBDIRS}" != x ] ; then \
+	    for dir in ${SUBDIRS}; \
+	    do \
+		    echo "$$dir:"; \
+		    if [ -d $$dir ]; then \
+			    (cd $$dir; $(MAKE) distclean); \
+		    fi; \
+	    done ; \
+	else true; fi
+
+Makefile : Makefile.in config.status $(host_makefile_frag) $(target_makefile_frag)
+	$(SHELL) config.status
+
+config.status: configure
+	$(SHELL) config.status --recheck
diff --git a/gdb/testsuite/TODO b/gdb/testsuite/TODO
new file mode 100644
index 0000000..978991c
--- /dev/null
+++ b/gdb/testsuite/TODO
@@ -0,0 +1,202 @@
+The highest priority item is not on this list: Fix bugs in the
+existing testsuite, fix the GDB/compiler/shell/etc bugs which it
+detects (particularly when they are hard to XFAIL), make it run
+reliably without unexpected failures on the "standard" machines, etc.
+This list exists largely as "tests we can add when we are ready to
+risk destabilizing it again".
+
+There are some tests which are only run on some platforms because they
+have not been tested on more platforms.  Enable them and fix any
+problems.  A partial list: recurse.exp, watchpoint.exp
+(test_watchpoint_triggered_in_syscall, test_complex_watchpoint).
+
+Test printing of structures passed by value, for the 7th, 8th, and 9th
+arguments (PR 1714).  Test printing structure arguments of
+2,4,6,8,12,16,and 20 bytes.  Same for structure return of all those
+sizes ("return", "finish", and call function).
+
+Get crossload tests to use --enable-targets and reenable them.
+
+corefile.exp:
+Test ability to run program when there is a core target, then go
+back to the core file when the program exits.
+
+Test handling of floating point variables
+1.  float, double, or long double
+2.  in register or saved register or memory.  Also the case where a
+double is in two float registers and only one of them is saved.
+3.  print them or set them
+4.  (Alpha) integer (32 or 64 bit) in floating point register.
+
+Print registers--"p $r5", "p sizeof ($r5)".  Test that they print
+appropriately (integer registers in decimal, registers which always
+contain addresses (pc, probably sp and fp, maybe others) in hex,
+floating point).
+
+Test completer.  Test that it completes a variety of things correctly
+(see the list of test cases in main.c in the gdb source).  Test TAB,
+M-?, and the "complete" command.
+
+Test "info line" with all kinds of linespecs.  Test that the last line
+of the file works right.
+
+weird.exp--test that unrecognized cross-reference types or
+unrecognized visibility or virtual characters get skipped properly
+(see stabs.texinfo).
+
+Test C++ nested types (especially if PR 1954 is fixed; even if not
+*some* things already should work even in the presence of nested
+types).  Test classes nested more than 9 levels deep (g++ mangles
+these differently) (both a demangle test and some tests which also
+test the compiler).  Test calling a method of a class nested more than
+9 levels (for gdb_mangle_name and demangling).
+
+Test static member functions (C++).  Test that "ptype" shows them
+correctly, both before and after they have been converted from stub
+methods.  Test that we can call them.
+
+Test printing complicated types, including functions, pointers to
+arrays of pointers of functions, functions which return pointers to
+functions, etc.
+
+printcmd.exp--test printing enum values.  Test printing an enum
+variable whose value is out of range.  Test "p (int)enum_var", "p/x
+enum_var".  Test that in something like "enum {FOO, LAST_THING=FOO}"
+we print FOO, not LAST_THING.
+
+Test GDB expressions--test all operators (and overloaded operators for
+C++).  Test integer constants which are signed or unsigned int, long,
+or long long.  Test detection of overflow of an integer constant.
+Here are a few integer constants to test (test they get the right
+types): 5, 5LL, 5LuL, 5L6u (invalid), 5LU.  Maybe things like
+0x12345678, 0x87654321, etc., but their types depend on sizes of int,
+long, etc.
+
+Test that printing const-qualified versions of various types works.
+In particular, on the sparc and probably other machines, "double" is
+handled differently from most types because it requires more alignment
+and thus goes in a different section (there is a gcc 2.4.5 bug with
+"const double" on sparc).
+
+Test that GDB's "source" command works and that things work if stdin
+is redirected (to a file or a pipe).  Test user defined command.  Run
+an inferior each of these ways (to test that inflow.c works).  Test
+that GDB works if the last line of stdin or a source'd file lacks a
+newline.
+
+Test that unmatched single quotes produce error messages, both in
+expressions and linespecs.
+
+Test "cd".  "foo/bar/.." should get simplified to "foo".  "/../.."
+should not get simplified (for Mach).  "/.." should not get simplified
+(for other networked OSes; POSIX.1 section B.2.3.7).  All these
+examples should continue to work with trailing slashes.
+
+Test scoping; here is a start
+ 1	int i=2;
+ 2	int j=3;
+ 3	main()
+ 4	{
+ 5	    int i;
+ 6	    for (i=600; i>0; i--)
+ 7		print_line(i);
+ 8	}
+ 9
+10	print_line(i)
+11	    int i;
+12	{
+13	    h();
+14	    printf("%d\n",i);
+15	}
+16
+17	h()
+18	{
+19	    printf("In h...");
+20	}
+Set a breakpoint in h, and print i, print_line::i, and main::i.  Set a
+breakpoint in main (or don't run the program), and test that
+print_line::i is an error.  But if i were static, "p main::i" should
+work even if the program is not being run.
+
+Write a test for the reentracy bug with rs6000_struct_return_address
+in rs6000-tdep.c.
+
+Test "return" from dummy frames.  Test "return" from non-innermost
+frame.  Test that "return" from a non-innermost frame restores
+registers which are saved not in that frame but in a frame more inner
+(I believe this currently works on few if any architectures).
+
+FORTRAN common blocks (a.out and xcoff--weird.exp has the start of
+one but it is not quite right as of 19 Nov 1993).
+
+Test that "x" command sets $_ and $__.  Test $_ in general.
+
+Test that "p/a" works when given addresses in text, data, and bss
+segments.  Test that it works if program is compiled with or without
+-g.  Test that it works if preceding symbol is static or if it is
+extern.
+
+Given `char abc[] = "abc\0def";' test "x/s abc" followed by "x/s"
+(should display "abc" followed by "def").  Test this works with no
+error message even if this is the last thing in the section (tests
+that val_print_string ignores an error if the error occurs after the
+'\0').
+
+Test ability to process NMAGIC a.out files.
+
+Test shared libraries:  "next" over printf, "step" into a function in
+a shared library which has line number info, breakpoint in a function
+in a shared library (either before or after the program is run and the
+shared libraries are loaded--also maybe write a test where the PLT
+will be in an unloaded state even though the shared library is loaded).
+
+If there are two breakpoints in the same place, and exactly one of
+them has its condition true, test that the correct breakpoint gets
+printed.
+
+Test "jump" including jump to a breakpoint (the latter will need an
+xfail for UDI and probably VxWorks (PR 1786 for vxworks; PR 2416
+contains some info for 29k).
+
+Set a watchpoint on a local variable (to be interesting, make a few
+calls, to be more interesting, make a recursive call).  Test that it
+gets disabled when leaving that scope.
+
+Test calling a function, hitting a breakpoint in the called function,
+calling another function, and hitting a breakpoint.  Test backtrace
+works in the presence of multiple dummy frames.  Test that "continue"
+will get you out of the inner called function, and "continue" again
+will get you back to where you were when you called the first one.
+
+Test special longjmp handling in wait_for_inferior (need to figure out
+in detail what the proper behavior in each case is).  Test longjmp to
+a place where there is a breakpoint (such that
+BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE happens).  In general, test
+interactions between longjmp and watchpoints, breakpoints, stepping,
+call function, etc.
+
+Test jumping right past a breakpoint (the case where wait_for_inferior
+passes not_a_breakpoint to bpstat_stop_status).  Might already be
+tested by some of the sun3 tests.  Probably want a .s test to avoid
+compiler dependencies.
+
+Test more obscure wait_for_inferior cases, expanding on the tests in
+watchpoint.exp, signals.exp, etc.
+
+Test stepping into functions which are one line long and functions
+which are on line 1 of the source file. (there is a class of bugs in
+which gdb doesn't find the line number information, and thus doesn't
+step into the function).
+
+Test that prologue recognition, backtrace, printing locals, etc.,
+still work in the presence of large frames (the point being that at
+some point immediate fields in RISC instructions will overflow and
+prologues will need to look different.  For sparc, the immediate field
+is 13 bits (signed), so I believe the threshold would be 4K bytes in a
+frame).
+
+
+(this is for editing this file with GNU emacs)
+Local Variables:
+mode: text
+End:
diff --git a/gdb/testsuite/aclocal.m4 b/gdb/testsuite/aclocal.m4
new file mode 100644
index 0000000..c754fdc
--- /dev/null
+++ b/gdb/testsuite/aclocal.m4
@@ -0,0 +1,583 @@
+dnl This file is duplicated in four places:
+dnl * gdb/aclocal.m4
+dnl * gdb/testsuite/aclocal.m4
+dnl * expect/aclocal.m4
+dnl * dejagnu/aclocal.m4
+dnl Consider modifying all copies in parallel.
+dnl written by Rob Savoye <rob@cygnus.com> for Cygnus Support
+dnl CYGNUS LOCAL: This gets the right posix flag for gcc
+AC_DEFUN(CY_AC_TCL_LYNX_POSIX,
+[AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AC_PROG_CPP])
+AC_MSG_CHECKING([to see if this is LynxOS])
+AC_CACHE_VAL(ac_cv_os_lynx,
+[AC_EGREP_CPP(yes,
+[/*
+ * The old Lynx "cc" only defines "Lynx", but the newer one uses "__Lynx__"
+ */
+#if defined(__Lynx__) || defined(Lynx)
+yes
+#endif
+], ac_cv_os_lynx=yes, ac_cv_os_lynx=no)])
+#
+if test "$ac_cv_os_lynx" = "yes" ; then
+  AC_MSG_RESULT(yes)
+  AC_DEFINE(LYNX)
+  AC_MSG_CHECKING([whether -mposix or -X is available])
+  AC_CACHE_VAL(ac_cv_c_posix_flag,
+  [AC_TRY_COMPILE(,[
+  /*
+   * This flag varies depending on how old the compiler is.
+   * -X is for the old "cc" and "gcc" (based on 1.42).
+   * -mposix is for the new gcc (at least 2.5.8).
+   */
+  #if defined(__GNUC__) && __GNUC__ >= 2
+  choke me
+  #endif
+  ], ac_cv_c_posix_flag=" -mposix", ac_cv_c_posix_flag=" -X")])
+  CC="$CC $ac_cv_c_posix_flag"
+  AC_MSG_RESULT($ac_cv_c_posix_flag)
+  else
+  AC_MSG_RESULT(no)
+fi
+])
+
+AC_DEFUN(CY_AC_PATH_TCLH, [
+#
+# Ok, lets find the tcl source trees so we can use the headers
+# Warning: transition of version 9 to 10 will break this algorithm
+# because 10 sorts before 9. We also look for just tcl. We have to
+# be careful that we don't match stuff like tclX by accident.
+# the alternative search directory is involked by --with-tclinclude
+#
+no_tcl=true
+AC_MSG_CHECKING(for Tcl private headers)
+AC_ARG_WITH(tclinclude, [  --with-tclinclude       directory where tcl private headers are], with_tclinclude=${withval})
+AC_CACHE_VAL(ac_cv_c_tclh,[
+# first check to see if --with-tclinclude was specified
+if test x"${with_tclinclude}" != x ; then
+  if test -f ${with_tclinclude}/tclInt.h ; then
+    ac_cv_c_tclh=`(cd ${with_tclinclude}; pwd)`
+  else
+    AC_MSG_ERROR([${with_tclinclude} directory doesn't contain private headers])
+  fi
+fi
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[0-9]]* 2>/dev/null` \
+		${srcdir}/../../tcl \
+		`ls -dr ${srcdir}/../../tcl[[0-9]]* 2>/dev/null` \
+		${srcdir}/../../../tcl \
+		`ls -dr ${srcdir}/../../../tcl[[0-9]]* 2>/dev/null ` ; do
+    if test -f $i/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i; pwd)`
+      break
+    fi
+    # Tcl 7.5 and greater puts headers in subdirectory.
+    if test -f $i/generic/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i; pwd)`/generic
+      break
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse its output
+if test x"${ac_cv_c_tclh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tcl[[0-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tcl[[0-9]]* 2>/dev/null` \
+		/usr/local/src/tcl \
+		/usr/local/lib/tcl \
+		${prefix}/include ; do
+    if test -f $i/tclInt.h ; then
+      ac_cv_c_tclh=`(cd $i; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tclh}" = x ; then
+   AC_HEADER_CHECK(tclInt.h, ac_cv_c_tclh=installed, ac_cv_c_tclh="")
+fi
+])
+if test x"${ac_cv_c_tclh}" = x ; then
+  TCLHDIR="# no Tcl private headers found"
+  AC_MSG_ERROR([Can't find Tcl private headers])
+fi
+if test x"${ac_cv_c_tclh}" != x ; then
+  no_tcl=""
+  if test x"${ac_cv_c_tclh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TCLHDIR=""
+  else
+    AC_MSG_RESULT([found in ${ac_cv_c_tclh}])
+    # this hack is cause the TCLHDIR won't print if there is a "-I" in it.
+    TCLHDIR="-I${ac_cv_c_tclh}"
+  fi
+fi
+
+AC_MSG_CHECKING([Tcl version])
+orig_includes="$CPPFLAGS"
+
+if test x"${TCLHDIR}" != x ; then
+  CPPFLAGS="$CPPFLAGS $TCLHDIR"
+fi
+
+# Get major and minor versions of Tcl.  Use funny names to avoid
+# clashes with eg SunOS.
+cat > conftest.c <<'EOF'
+#include "tcl.h"
+MaJor = TCL_MAJOR_VERSION
+MiNor = TCL_MINOR_VERSION
+EOF
+
+tclmajor=
+tclminor=
+if (eval "$CPP $CPPFLAGS conftest.c") 2>/dev/null >conftest.out; then
+   # Success.
+   tclmajor=`egrep '^MaJor = ' conftest.out | sed -e 's/^MaJor = *//' -e 's/ *$//'`
+   tclminor=`egrep '^MiNor = ' conftest.out | sed -e 's/^MiNor = *//' -e 's/ *$//'`
+fi
+rm -f conftest.c conftest.out
+
+if test -z "$tclmajor" || test -z "$tclminor"; then
+   AC_MSG_RESULT([fatal error: could not find major or minor version number of Tcl])
+   exit 1
+fi
+AC_MSG_RESULT(${tclmajor}.${tclminor})
+
+CPPFLAGS="${orig_includes}"
+
+AC_PROVIDE([$0])
+AC_SUBST(TCLHDIR)
+])
+AC_DEFUN(CY_AC_PATH_TCLLIB, [
+#
+# Ok, lets find the tcl library
+# First, look for one uninstalled.  
+# the alternative search directory is invoked by --with-tcllib
+#
+
+if test $tclmajor -ge 7 -a $tclminor -ge 4 ; then
+  installedtcllibroot=tcl$tclversion
+else
+  installedtcllibroot=tcl
+fi
+
+if test x"${no_tcl}" = x ; then
+  # we reset no_tcl incase something fails here
+  no_tcl=true
+  AC_ARG_WITH(tcllib, [  --with-tcllib           directory where the tcl library is],
+         with_tcllib=${withval})
+  AC_MSG_CHECKING([for Tcl library])
+  AC_CACHE_VAL(ac_cv_c_tcllib,[
+  # First check to see if --with-tcllib was specified.
+  # This requires checking for both the installed and uninstalled name-styles
+  # since we have no idea if it's installed or not.
+  if test x"${with_tcllib}" != x ; then
+    if test -f "${with_tcllib}/lib$installedtcllibroot.so" ; then
+      ac_cv_c_tcllib=`(cd ${with_tcllib}; pwd)`/lib$installedtcllibroot.so
+    elif test -f "${with_tcllib}/libtcl.so" ; then
+      ac_cv_c_tcllib=`(cd ${with_tcllib}; pwd)`/libtcl.so
+    # then look for a freshly built statically linked library
+    # if Makefile exists we assume its configured and libtcl will be built first.
+    elif test -f "${with_tcllib}/lib$installedtcllibroot.a" ; then
+      ac_cv_c_tcllib=`(cd ${with_tcllib}; pwd)`/lib$installedtcllibroot.a
+    elif test -f "${with_tcllib}/libtcl.a" ; then
+      ac_cv_c_tcllib=`(cd ${with_tcllib}; pwd)`/libtcl.a
+    else
+      AC_MSG_ERROR([${with_tcllib} directory doesn't contain libraries])
+    fi
+  fi
+  # then check for a private Tcl library
+  # Since these are uninstalled, use the simple lib name root.
+  if test x"${ac_cv_c_tcllib}" = x ; then
+    for i in \
+		../tcl \
+		`ls -dr ../tcl[[0-9]]* 2>/dev/null` \
+		../../tcl \
+		`ls -dr ../../tcl[[0-9]]* 2>/dev/null` \
+		../../../tcl \
+		`ls -dr ../../../tcl[[0-9]]* 2>/dev/null` ; do
+      # Tcl 7.5 and greater puts library in subdir.  Look there first.
+      if test -f "$i/unix/libtcl.so" ; then
+	 ac_cv_c_tcllib=`(cd $i; pwd)`/unix/libtcl.so
+	 break
+      elif test -f "$i/unix/libtcl.a" -o -f "$i/unix/Makefile"; then
+	 ac_cv_c_tcllib=`(cd $i; pwd)`/unix/libtcl.a
+	 break
+      # look for a freshly built dynamically linked library
+      elif test -f "$i/libtcl.so" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/libtcl.so
+	break
+
+      # then look for a freshly built statically linked library
+      # if Makefile exists we assume its configured and libtcl will be
+      # built first.
+      elif test -f "$i/libtcl.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/libtcl.a
+	break
+      fi
+    done
+  fi
+  # check in a few common install locations
+  if test x"${ac_cv_c_tcllib}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      # first look for a freshly built dynamically linked library
+      if test -f "$i/lib$installedtcllibroot.so" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/lib$installedtcllibroot.so
+	break
+      # then look for a freshly built statically linked library
+      # if Makefile exists we assume its configured and libtcl will be built first.
+      elif test -f "$i/lib$installedtcllibroot.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/lib$installedtcllibroot.a
+	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tcllib}" = x ; then
+    for i in \
+		${srcdir}/../tcl \
+		`ls -dr ${srcdir}/../tcl[[0-9]]* 2>/dev/null` ; do
+      # Tcl 7.5 and greater puts library in subdir.  Look there first.
+      if test -f "$i/unix/libtcl.so" ; then
+	 ac_cv_c_tcllib=`(cd $i; pwd)`/unix/libtcl.so
+	 break
+      elif test -f "$i/unix/libtcl.a" -o -f "$i/unix/Makefile"; then
+	 ac_cv_c_tcllib=`(cd $i; pwd)`/unix/libtcl.a
+	 break
+      # look for a freshly built dynamically linked library
+      elif test -f "$i/libtcl.so" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/libtcl.so
+	break
+
+      # then look for a freshly built statically linked library
+      # if Makefile exists we assume its configured and libtcl will be
+      # built first.
+      elif test -f "$i/libtcl.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tcllib=`(cd $i; pwd)`/libtcl.a
+	break
+      fi
+    done
+  fi
+
+  # see if one is conveniently installed with the compiler
+  if test x"${ac_cv_c_tcllib}" = x ; then	
+    orig_libs="$LIBS"
+    LIBS="$LIBS -l$installedtcllibroot -lm"    
+    AC_TRY_RUN([
+    Tcl_AppInit()
+    { exit(0); }], ac_cv_c_tcllib="-l$installedtcllibroot", ac_cv_c_tcllib=""
+    , ac_cv_c_tclib="-l$installedtcllibroot")
+    LIBS="${orig_libs}"
+   fi
+  ])
+  if test x"${ac_cv_c_tcllib}" = x ; then
+    TCLLIB="# no Tcl library found"
+    AC_MSG_WARN(Can't find Tcl library)
+  else
+    TCLLIB=${ac_cv_c_tcllib}
+    AC_MSG_RESULT(found $TCLLIB)
+    no_tcl=
+  fi
+fi
+
+AC_PROVIDE([$0])
+AC_SUBST(TCLLIB)
+])
+AC_DEFUN(CY_AC_PATH_TKH, [
+#
+# Ok, lets find the tk source trees so we can use the headers
+# If the directory (presumably symlink) named "tk" exists, use that one
+# in preference to any others.  Same logic is used when choosing library
+# and again with Tcl. The search order is the best place to look first, then in
+# decreasing significance. The loop breaks if the trigger file is found.
+# Note the gross little conversion here of srcdir by cd'ing to the found
+# directory. This converts the path from a relative to an absolute, so
+# recursive cache variables for the path will work right. We check all
+# the possible paths in one loop rather than many seperate loops to speed
+# things up.
+# the alternative search directory is invoked by --with-tkinclude
+#
+AC_MSG_CHECKING(for Tk private headers)
+AC_ARG_WITH(tkinclude, [  --with-tkinclude        directory where the tk private headers are],
+            with_tkinclude=${withval})
+no_tk=true
+AC_CACHE_VAL(ac_cv_c_tkh,[
+# first check to see if --with-tkinclude was specified
+if test x"${with_tkinclude}" != x ; then
+  if test -f ${with_tkinclude}/tk.h ; then
+    ac_cv_c_tkh=`(cd ${with_tkinclude}; pwd)`
+  else
+    AC_MSG_ERROR([${with_tkinclude} directory doesn't contain private headers])
+  fi
+fi
+# next check in private source directory
+#
+# since ls returns lowest version numbers first, reverse the entire list
+# and search for the worst fit, overwriting it with better fits as we find them
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[0-9]]* 2>/dev/null` \
+		${srcdir}/../../tk \
+		`ls -dr ${srcdir}/../../tk[[0-9]]* 2>/dev/null` \
+		${srcdir}/../../../tk \
+		`ls -dr ${srcdir}/../../../tk[[0-9]]* 2>/dev/null ` ; do
+    if test -f $i/tk.h ; then
+      ac_cv_c_tkh=`(cd $i; pwd)`
+      break
+    fi
+    # Tk 4.1 and greater puts this in a subdir.
+    if test -f $i/generic/tk.h; then
+       ac_cv_c_tkh=`(cd $i; pwd)`/generic
+    fi
+  done
+fi
+# finally check in a few common install locations
+#
+# since ls returns lowest version numbers first, reverse the entire list
+# and search for the worst fit, overwriting it with better fits as we find them
+if test x"${ac_cv_c_tkh}" = x ; then
+  for i in \
+		`ls -dr /usr/local/src/tk[[0-9]]* 2>/dev/null` \
+		`ls -dr /usr/local/lib/tk[[0-9]]* 2>/dev/null` \
+		/usr/local/src/tk \
+		/usr/local/lib/tk \
+		${prefix}/include ; do
+    if test -f $i/tk.h ; then
+      ac_cv_c_tkh=`(cd $i; pwd)`
+      break
+    fi
+  done
+fi
+# see if one is installed
+if test x"${ac_cv_c_tkh}" = x ; then
+  AC_HEADER_CHECK(tk.h, ac_cv_c_tkh=installed)
+fi
+])
+if test x"${ac_cv_c_tkh}" != x ; then
+  no_tk=""
+  if test x"${ac_cv_c_tkh}" = x"installed" ; then
+    AC_MSG_RESULT([is installed])
+    TKHDIR=""
+  else
+    AC_MSG_RESULT([found in $ac_cv_c_tkh])
+    # this hack is cause the TKHDIR won't print if there is a "-I" in it.
+    TKHDIR="-I${ac_cv_c_tkh}"
+  fi
+else
+  TKHDIR="# no Tk directory found"
+  AC_MSG_WARN([Can't find Tk private headers])
+  no_tk=true
+fi
+
+# if Tk is installed, extract the major/minor version
+if test x"${no_tk}" = x ; then
+AC_MSG_CHECKING([Tk version])
+orig_includes="$CPPFLAGS"
+
+if test x"${TCLHDIR}" != x ; then
+  CPPFLAGS="$CPPFLAGS $TCLHDIR"
+fi
+if test x"${TKHDIR}" != x ; then
+  CPPFLAGS="$CPPFLAGS $TKHDIR"
+fi
+if test x"${x_includes}" != x -a x"${x_includes}" != xNONE ; then
+  CPPFLAGS="$CPPFLAGS -I$x_includes"
+fi
+
+# Get major and minor versions of Tk.  Use funny names to avoid
+# clashes with eg SunOS.
+cat > conftest.c <<'EOF'
+#include "tk.h"
+MaJor = TK_MAJOR_VERSION
+MiNor = TK_MINOR_VERSION
+EOF
+
+tkmajor=
+tkminor=
+if (eval "$CPP $CPPFLAGS conftest.c") 2>/dev/null >conftest.out; then
+   # Success.
+   tkmajor=`egrep '^MaJor = ' conftest.out | sed -e 's/^MaJor = *//' -e 's/ *$//'`
+   tkminor=`egrep '^MiNor = ' conftest.out | sed -e 's/^MiNor = *//' -e 's/ *$//'`
+fi
+rm -f conftest.c conftest.out
+
+if test -z "$tkmajor" || test -z "$tkminor"; then
+   AC_MSG_RESULT([fatal error: could not find major or minor version number of Tk])
+   exit 1
+fi
+AC_MSG_RESULT(${tkmajor}.${tkminor})
+
+CPPFLAGS="${orig_includes}"
+fi
+
+AC_PROVIDE([$0])
+AC_SUBST(TKHDIR)
+])
+AC_DEFUN(CY_AC_PATH_TKLIB, [
+AC_REQUIRE([CY_AC_PATH_TCL])
+#
+# Ok, lets find the tk library
+# First, look for the latest private (uninstalled) copy
+# Notice that the destinations in backwards priority since the tests have
+# no break.
+# Then we look for either .a, .so, or Makefile.  A Makefile is acceptable
+# is it indicates the target has been configured and will (probably)
+# soon be built.  This allows an entire tree of Tcl software to be
+# configured at once and then built.
+# the alternative search directory is invoked by --with-tklib
+#
+
+if test x"${no_tk}" = x ; then
+  # reset no_tk incase something fails here
+  no_tk="true"
+
+  if test $tkmajor -ge 4 ; then
+    installedtklibroot=tk$tkversion
+  else
+    installedtkllibroot=tk
+  fi
+
+  AC_ARG_WITH(tklib, [  --with-tklib            directory where the tk library is],
+              with_tklib=${withval})
+  AC_MSG_CHECKING([for Tk library])
+  AC_CACHE_VAL(ac_cv_c_tklib,[
+  # first check to see if --with-tklib was specified
+  # This requires checking for both the installed and uninstalled name-styles
+  # since we have no idea if it's installed or not.
+  if test x"${with_tklib}" != x ; then
+    if test -f "${with_tklib}/lib$installedtklibroot.so" ; then
+      ac_cv_c_tklib=`(cd ${with_tklib}; pwd)`/lib$installedtklibroot.so
+      no_tk=""
+    elif test -f "${with_tklib}/libtk.so" ; then
+      ac_cv_c_tklib=`(cd ${with_tklib}; pwd)`/libtk.so
+      no_tk=""
+    # then look for a freshly built statically linked library
+    # if Makefile exists we assume its configured and libtk will be built
+    elif test -f "${with_tklib}/lib$installedtklibroot.a" ; then
+      ac_cv_c_tklib=`(cd ${with_tklib}; pwd)`/lib$installedtklibroot.a
+      no_tk=""
+    elif test -f "${with_tklib}/libtk.a" ; then
+      ac_cv_c_tklib=`(cd ${with_tklib}; pwd)`/libtk.a
+      no_tk=""
+    else
+      AC_MSG_ERROR([${with_tklib} directory doesn't contain libraries])
+    fi
+  fi
+  # then check for a private Tk library
+  # Since these are uninstalled, use the simple lib name root.
+  if test x"${ac_cv_c_tklib}" = x ; then
+    for i in \
+		../tk \
+		`ls -dr ../tk[[0-9]]* 2>/dev/null` \
+		../../tk \
+		`ls -dr ../../tk[[0-9]]* 2>/dev/null` \
+		../../../tk \
+		`ls -dr ../../../tk[[0-9]]* 2>/dev/null` ; do
+      # Tk 4.1 and greater puts things in subdirs.  Check these first.
+      if test -f "$i/unix/libtk.so" ; then
+	 ac_cv_c_tklib=`(cd $i; pwd)`/unix/libtk.so
+	 no_tk=
+	 break
+      elif test -f "$i/unix/libtk.a" -o -f "$i/unix/Makefile"; then
+	 ac_cv_c_tklib=`(cd $i; pwd)`/unix/libtk.a
+	 no_tk=
+	 break
+      # look for a freshly built dynamically linked library
+      elif test -f "$i/libtk.so" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/libtk.so
+        no_tk=
+	break
+      # then look for a freshly built statically linked library
+      # if Makefile exists we assume its configured and libtk will be built 
+      elif test -f "$i/libtk.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/libtk.a
+        no_tk=""
+ 	break
+      fi
+    done
+  fi
+  # finally check in a few common install locations
+  if test x"${ac_cv_c_tklib}" = x ; then
+    for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do
+      # first look for a freshly built dynamically linked library
+      if test -f "$i/lib$installedtklibroot.so" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/lib$installedtklibroot.so
+        no_tk=""
+	break
+      # then look for a freshly built statically linked library
+      # if Makefile exists, we assume it's configured and libtcl will be built 
+      elif test -f "$i/lib$installedtklibroot.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/lib$installedtklibroot.a
+        no_tk=""
+ 	break
+      fi
+    done
+  fi
+  # check in a few other private locations
+  if test x"${ac_cv_c_tklib}" = x ; then
+    for i in \
+		${srcdir}/../tk \
+		`ls -dr ${srcdir}/../tk[[0-9]]* 2>/dev/null` ; do
+      # Tk 4.1 and greater puts things in subdirs.  Check these first.
+      if test -f "$i/unix/libtk.so" ; then
+	 ac_cv_c_tklib=`(cd $i; pwd)`/unix/libtk.so
+	 no_tk=
+	 break
+      elif test -f "$i/unix/libtk.a" -o -f "$i/unix/Makefile"; then
+	 ac_cv_c_tcllib=`(cd $i; pwd)`/unix/libtk.a
+	 no_tk=
+	 break
+      # look for a freshly built dynamically linked library
+      elif test -f "$i/libtk.so" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/libtk.so
+        no_tk=""
+	break
+      # then look for a freshly built statically linked library
+      # if Makefile exists, we assume it's configured and libtcl will be built 
+      elif test -f "$i/libtk.a" -o -f "$i/Makefile" ; then
+        ac_cv_c_tklib=`(cd $i; pwd)`/libtk.a
+        no_tk=""
+ 	break
+      fi
+    done
+  fi
+  # see if one is conveniently installed with the compiler
+  if test x"${ac_cv_c_tklib}" = x ; then
+       AC_REQUIRE([AC_PATH_X])
+       orig_libs="$LIBS"
+       LIBS="$LIBS -l$installedtklibroot $x_libraries $ac_cv_c_tcllib -lm"    
+       AC_TRY_RUN([
+       Tcl_AppInit()
+       { exit(0); }], ac_cv_c_tklib="-l$installedtklibroot", ac_cv_c_tklib=""
+       , ac_cv_c_tklib="-l$installedtklibroot")
+       LIBS="${orig_libs}"
+   fi
+  ])
+  if test x"${ac_cv_c_tklib}" = x ; then
+    TKLIB="# no Tk library found"
+    AC_MSG_WARN(Can't find Tk library)
+  else
+    TKLIB=$ac_cv_c_tklib
+    AC_MSG_RESULT(found $TKLIB)
+    no_tk=
+  fi
+fi
+AC_PROVIDE([$0])
+AC_SUBST(TKLIB)
+])
+AC_DEFUN(CY_AC_PATH_TK, [
+  CY_AC_PATH_TKH
+  CY_AC_PATH_TKLIB
+])
+AC_DEFUN(CY_AC_PATH_TCL, [
+  CY_AC_PATH_TCLH
+  CY_AC_PATH_TCLLIB
+])
diff --git a/gdb/testsuite/config/abug.exp b/gdb/testsuite/config/abug.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/abug.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/arm-ice.exp b/gdb/testsuite/config/arm-ice.exp
new file mode 100644
index 0000000..d984274
--- /dev/null
+++ b/gdb/testsuite/config/arm-ice.exp
@@ -0,0 +1 @@
+load_lib "../config/monitor.exp";
diff --git a/gdb/testsuite/config/cpu32bug.exp b/gdb/testsuite/config/cpu32bug.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/cpu32bug.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/cygmon.exp b/gdb/testsuite/config/cygmon.exp
new file mode 100644
index 0000000..d984274
--- /dev/null
+++ b/gdb/testsuite/config/cygmon.exp
@@ -0,0 +1 @@
+load_lib "../config/monitor.exp";
diff --git a/gdb/testsuite/config/d10v.exp b/gdb/testsuite/config/d10v.exp
new file mode 100644
index 0000000..955288c
--- /dev/null
+++ b/gdb/testsuite/config/d10v.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib "../config/monitor.exp"
diff --git a/gdb/testsuite/config/dve.exp b/gdb/testsuite/config/dve.exp
new file mode 100644
index 0000000..6aa46c1
--- /dev/null
+++ b/gdb/testsuite/config/dve.exp
@@ -0,0 +1,23 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
+set timeout 1000
+verbose "Timeout is now $timeout seconds" 2
+
diff --git a/gdb/testsuite/config/est.exp b/gdb/testsuite/config/est.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/est.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/gdbserver.exp b/gdb/testsuite/config/gdbserver.exp
new file mode 100644
index 0000000..bb6f724
--- /dev/null
+++ b/gdb/testsuite/config/gdbserver.exp
@@ -0,0 +1,104 @@
+# Test Framework Driver for GDB using the extended gdb remote protocol
+#   Copyright 1995, 1997 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+#
+# For this to function correctly, you need to set a number of variables
+# in your gdb/site.exp file
+#
+#	set noargs 1		-- we can't pass arguments (yet)
+#	set noinferiorio 1	-- we can't get io to/from the inferior
+#	set targethost <host>	-- name of the remote system (runs gdbserver)
+#	set debughost <host>	-- name of the system running gdb
+#	set port <number>	-- starting port number for communication
+#	set gdbserver <path>	-- path (on the remote side) to find
+#				   gdbserver
+#       set rsh <path>		-- path (on debughost side) to rsh
+#	set rcp <path>		-- path (on debughost side) to rcp
+#	
+# You will need to be able to spawn processes from gdbhost to run on
+# targethost via rsh (this is how we start gdbserver); similarly
+# you need to be able to rcp files from gdbhost to targethost.
+#
+# We don't do much error checking, if something goes wrong, you'll probably
+# just get a tcl error and everything will die.  FIXME
+#
+
+# Load the basic gdb testing library
+load_lib gdb.exp
+load_lib monitor.exp
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+# Loading a file in the gdbsrever framework is a little strange in that
+# we also create the inferior (which is stopped at the first instruction
+# in the program when we get control).
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+    global debughost
+    global port
+
+    # bump the port number to avoid conflicts with hung ports
+    set targethost [target_info gdb_server_host];
+    set debughost [target_info gdb_debug_host];
+    if [target_info exists gdb_server_prog] {
+	set gdbserver [target_info gdb_server_prog];
+    } else {
+	set gdbserver "gdbserver";
+    }
+    incr port
+    set serialport $targethost:$port
+     
+    # Copy the file down to the remote host.
+    set file [remote_download host $arg];
+
+    # now start gdbserver on the remote side
+    remote_spawn host "$gdbserver $debughost:$port $file >& /dev/null < /dev/null"
+ 
+    # give it plenty of time to get going (lynx)
+    sleep 30
+
+    # tell gdb we are remote debugging
+    if [gdb_target_monitor $arg] {
+	return -1;
+    }
+
+    return 1
+}
+
+#
+# gdb_start -- start GDB running.
+#
+proc gdb_start { } {
+    global gdb_prompt
+
+    # do the usual stuff
+    catch default_gdb_start
+
+    # FIXME: This shouldn't be necessary, but lots of PA tests fail
+    # without it.
+    send "set remotecache 0\n"
+    expect {
+	-re "set remotecache 0\[\r\n\]+.*$gdb_prompt $" {}
+	default { fail "gdb_start"}
+    }
+}
diff --git a/gdb/testsuite/config/h8300.exp b/gdb/testsuite/config/h8300.exp
new file mode 100644
index 0000000..d984274
--- /dev/null
+++ b/gdb/testsuite/config/h8300.exp
@@ -0,0 +1 @@
+load_lib "../config/monitor.exp";
diff --git a/gdb/testsuite/config/hmsirom.exp b/gdb/testsuite/config/hmsirom.exp
new file mode 100644
index 0000000..75fc81d
--- /dev/null
+++ b/gdb/testsuite/config/hmsirom.exp
@@ -0,0 +1,22 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Support for testing against a Hitachi SH3 target rom
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/hppro.exp b/gdb/testsuite/config/hppro.exp
new file mode 100644
index 0000000..0fca142
--- /dev/null
+++ b/gdb/testsuite/config/hppro.exp
@@ -0,0 +1,24 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
+
+# Hppro monitor is very slow...
+set timeout 540
+verbose "Timeout is now $timeout seconds" 2
diff --git a/gdb/testsuite/config/i386-bozo.exp b/gdb/testsuite/config/i386-bozo.exp
new file mode 100644
index 0000000..7809093
--- /dev/null
+++ b/gdb/testsuite/config/i386-bozo.exp
@@ -0,0 +1 @@
+load_lib "../config/monitor.exp"
diff --git a/gdb/testsuite/config/i960.exp b/gdb/testsuite/config/i960.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/i960.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/m32r-stub.exp b/gdb/testsuite/config/m32r-stub.exp
new file mode 100644
index 0000000..cd04787
--- /dev/null
+++ b/gdb/testsuite/config/m32r-stub.exp
@@ -0,0 +1 @@
+load_lib "../../testsuite/config/sparclet.exp"
diff --git a/gdb/testsuite/config/m32r.exp b/gdb/testsuite/config/m32r.exp
new file mode 100644
index 0000000..94dc6a2
--- /dev/null
+++ b/gdb/testsuite/config/m32r.exp
@@ -0,0 +1,23 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
+set timeout 120
+verbose "Timeout is now $timeout seconds" 2
+
diff --git a/gdb/testsuite/config/m68k-emc.exp b/gdb/testsuite/config/m68k-emc.exp
new file mode 100644
index 0000000..70b8f5e
--- /dev/null
+++ b/gdb/testsuite/config/m68k-emc.exp
@@ -0,0 +1,17 @@
+load_lib gdb.exp
+load_lib "../config/monitor.exp"
+
+proc gdb_emclaptop_command { command } {
+    global board_info;
+    set tname [board_info target name];
+
+    if ![info exists board_info($tname,m68k_connected)] {
+	m68k_emc_board_connect target;
+    }
+    # This is about all we can do for now. *sigh*
+    set dos_host [board_info target dos_host];
+
+    remote_send $dos_host "${command}\n";
+    #remote_expect $dos_host {
+    #}
+}
diff --git a/gdb/testsuite/config/mips-idt.exp b/gdb/testsuite/config/mips-idt.exp
new file mode 100644
index 0000000..72664df
--- /dev/null
+++ b/gdb/testsuite/config/mips-idt.exp
@@ -0,0 +1,22 @@
+#   Copyright (C) 1993, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+load_lib ../config/monitor.exp
+
+
diff --git a/gdb/testsuite/config/mips.exp b/gdb/testsuite/config/mips.exp
new file mode 100644
index 0000000..72664df
--- /dev/null
+++ b/gdb/testsuite/config/mips.exp
@@ -0,0 +1,22 @@
+#   Copyright (C) 1993, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+load_lib ../config/monitor.exp
+
+
diff --git a/gdb/testsuite/config/mn10300-eval.exp b/gdb/testsuite/config/mn10300-eval.exp
new file mode 100644
index 0000000..6aa46c1
--- /dev/null
+++ b/gdb/testsuite/config/mn10300-eval.exp
@@ -0,0 +1,23 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
+set timeout 1000
+verbose "Timeout is now $timeout seconds" 2
+
diff --git a/gdb/testsuite/config/monitor.exp b/gdb/testsuite/config/monitor.exp
new file mode 100644
index 0000000..0d381a2
--- /dev/null
+++ b/gdb/testsuite/config/monitor.exp
@@ -0,0 +1,230 @@
+# Test Framework Driver for GDB driving a ROM monitor (via monitor.c).
+#   Copyright 1995, 1997 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+load_lib gdb.exp
+
+#
+# gdb_target_monitor
+# Set gdb to target the monitor
+#
+proc gdb_target_monitor { exec_file } {
+    global gdb_prompt
+    global exit_status
+    global timeout
+
+    if [target_info exists gdb_protocol] {
+	set targetname "[target_info gdb_protocol]"
+    } else {
+	perror "No protocol specified for [target_info name].";
+	return -1;
+    }
+    if [target_info exists baud] {
+	gdb_test "set remotebaud [target_info baud]" "" ""
+    }
+    if [target_info exists gdb_serial] {
+       set serialport "[target_info gdb_serial]";
+    } elseif [target_info exists netport] {
+	set serialport "[target_info netport]"
+    } else {
+	set serialport "[target_info serial]"
+    }
+
+    for {set j 1} {$j <= 2} {incr j} {
+	if [gdb_file_cmd $exec_file] { return -1; }
+
+	for {set i 1} {$i <= 3} {incr i} {
+    	    send_gdb "target $targetname $serialport\n"
+	    gdb_expect 60 {
+		-re "A program is being debugged already.*ill it.*y or n. $" {
+		    send_gdb "y\n";
+		    exp_continue;
+		}
+		-re "Couldn't establish connection to remote.*$gdb_prompt" {
+		    verbose "Connection failed";
+		}
+		-re "Remote MIPS debugging.*$gdb_prompt" {
+		    verbose "Set target to $targetname";
+		    return 0;
+		}
+		-re "Remote debugging using .*$serialport.*$gdb_prompt" {
+		    verbose "Set target to $targetname";
+		    return 0;
+		}
+		-re "Remote target $targetname connected to.*$gdb_prompt" {
+		    verbose "Set target to $targetname";
+		    return 0;
+		}
+		-re "Connected to.*$gdb_prompt" { 
+		    verbose "Set target to $targetname";
+		    return 0;
+		}
+		-re "Ending remote.*$gdb_prompt" { }
+		-re "Connection refused.*$gdb_prompt" {
+		    verbose "Connection refused by remote target.  Pausing, and trying again."
+		    sleep 30
+		    continue
+		}
+		-re "Timeout reading from remote system.*$gdb_prompt" {
+		    verbose "Got timeout error from gdb.";
+		}
+		timeout {
+		    send_gdb "";
+		    break
+		}
+	    }
+	}
+
+	gdb_target_exec;
+
+	if { $j == 1 && ![reboot_target] } {
+	    break;
+	}
+    }
+
+    perror "Couldn't set target for $targetname, port is $serialport.";
+    return -1;
+}
+
+proc gdb_target_exec { } {
+    gdb_test "target exec" "No executable file now." "" ".*Kill it.*y or n.*" "y"
+    
+}
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+    global timeout
+    global last_gdb_file;
+
+    if { $arg == "" } {
+	if [info exists last_gdb_file] {
+	    set arg $last_gdb_file;
+	} else {
+	    send_gdb "info files\n";
+	    gdb_expect 30 {
+		-re "Symbols from \"(\[^\"\]+)\"" {
+		    set arg $expect_out(1,string);
+		    exp_continue;
+		}
+		-re "Local exec file:\[\r\n\]+\[ \t\]*`(\[^'\]+)'," {
+		    set arg $expect_out(1,string);
+		    exp_continue;
+		}
+		-re "$gdb_prompt $" { }
+	    }
+	}
+    }
+
+    set last_gdb_file $arg;
+
+    for { set j 1; } { $j <= 2 } {incr j; } {
+	if [target_info exists gdb,use_standard_load] {
+	    gdb_target_exec;
+	    if ![target_info exists gdb,no_push_conn] {
+		remote_push_conn host;
+	    }
+	    set state [remote_ld target $arg];
+	    if ![target_info exists gdb,no_push_conn] {
+		remote_close target;
+		remote_pop_conn host;
+	    }
+	    if { $state == "pass" } {
+		if [gdb_target_monitor $arg] { return -1; }
+		gdb_test "list main" ".*" ""
+		verbose "Loaded $arg into $GDB\n";
+		return 0;
+	    }
+	} else {
+
+	    if [gdb_target_monitor $arg] { return -1 }
+
+	    if [is_remote host] {
+		# FIXME: Multiple downloads. bleah.
+		set farg [remote_download host $arg];
+	    } else {
+		set farg $arg;
+	    }
+
+	    if { $arg != "" && [target_info exists gdb_sect_offset] } {
+		set textoff [target_info gdb_sect_offset];
+		send_gdb "sect .text $textoff\n";
+		gdb_expect 30 {
+		    -re "(0x\[0-9a-z]+) - 0x\[0-9a-z\]+ is \\.data" {
+			set dataoff $expect_out(1,string);
+			exp_continue;
+		    }
+		    -re "(0x\[0-9a-z\]+) - 0x\[0-9a-z\]+ is \\.bss" {
+			set bssoff $expect_out(1,string);
+			exp_continue;
+		    }
+		    -re "$gdb_prompt" { }
+		}
+		set dataoff [format 0x%x [expr $dataoff + $textoff]];
+		set bssoff [format 0x%x [expr $bssoff + $textoff]];
+		send_gdb "sect .data $dataoff\n";
+		gdb_expect 30 {
+		    -re "$gdb_prompt" { }
+		}
+		send_gdb "sect .bss $bssoff\n";
+		gdb_expect 30 {
+		    -re "$gdb_prompt" { }
+		}
+	    }
+
+	    verbose "Loading $farg"
+	    if [target_info exists gdb_load_offset] {
+		set command "load $farg [target_info gdb_load_offset]\n";
+	    } else {
+		set command "load $farg\n";
+	    }
+	    send_gdb $command;
+	    gdb_expect 1600 {
+		-re "\[Ff\]ailed.*$gdb_prompt $" {
+		    verbose "load failed";
+		}
+		-re "Timeout reading from remote.*$gdb_prompt" {
+		}
+		-re "$gdb_prompt $" {
+		    verbose "Loaded $farg into $GDB\n"
+		    return 0;
+		}
+		timeout {
+		    if { $verbose > 1 } {
+			perror "Timed out trying to load $farg."
+		    }
+		}
+	    }
+	}
+
+	# Make sure we don't have an open connection to the target.
+	gdb_target_exec;
+
+	if { $j == 1 } {
+	    if { ![reboot_target] } {
+		break;
+	    }
+	}
+    }
+    perror "Couldn't load file into GDB.";
+    return -1;
+}
diff --git a/gdb/testsuite/config/mt-a29k-udi b/gdb/testsuite/config/mt-a29k-udi
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/gdb/testsuite/config/mt-a29k-udi
diff --git a/gdb/testsuite/config/mt-i386-aout b/gdb/testsuite/config/mt-i386-aout
new file mode 100644
index 0000000..19b1cab
--- /dev/null
+++ b/gdb/testsuite/config/mt-i386-aout
@@ -0,0 +1,59 @@
+# compilers and assemblers
+CC = i386-aout-gcc
+CFLAGS = -g -D${target_os}
+C++ = ${CC}
+C++FLAGS = ${CFLAGS}
+CXX = ${CC}
+CXXFLAGS = ${CFLAGS}
+AS = i386-aout-as
+ASFLAGS = 
+FC =
+FCFLAGS = 
+LD = ld
+LDFLAGS = 
+LIBS = 
+
+# binutils
+
+RANLIB = i386-aout-ranlib
+RANLIBFLAGS =
+
+NM = i386-aout-nm
+NMFLAGS =
+
+SIZE = i386-aout-size
+SIZEFLAGS =
+
+STRIP = i386-aout-strip
+STRIPFLAGS =
+
+OBJDUMP = i386-aout-objdump
+OBJDUMPFLAGS =
+
+DEMANGLE = i386-aout-demangle
+DEMANGLEFLAGS =
+
+COPY = i386-aout-copy
+COPYFLAGS =
+
+# other utils
+LEX = flex
+LEXFLAGS =
+
+YACC = byacc
+YACCFLAGS = 
+
+AR = i386-aout-ar
+ARFLAGS =
+
+CPP = ${CC} -E
+CPPFLAGS = 
+
+GDB = i386-aout-gdb
+GDBFLAGS = -nx
+
+DIFF = diff
+DIFFFLAGS = 
+
+RUNTEST=i386-aout-runtest
+RUNTESTFLAGS=
diff --git a/gdb/testsuite/config/mt-i960-nindy b/gdb/testsuite/config/mt-i960-nindy
new file mode 100644
index 0000000..9786c51
--- /dev/null
+++ b/gdb/testsuite/config/mt-i960-nindy
@@ -0,0 +1 @@
+LDFLAGS_FOR_TARGET = -nostartfiles
diff --git a/gdb/testsuite/config/mt-lynx b/gdb/testsuite/config/mt-lynx
new file mode 100644
index 0000000..1c153af
--- /dev/null
+++ b/gdb/testsuite/config/mt-lynx
@@ -0,0 +1,4 @@
+CFLAGS_FOR_TARGET = 
+STEP_EXECUTABLE = step
+THREADFLAGS = -mposix -mthreads
+#LDFLAGS= -L/usr/cygnus/progressive-95q1/H-sparc-sun-sunos4.1.3/i386-lynx/lib/thread
diff --git a/gdb/testsuite/config/mt-m68k b/gdb/testsuite/config/mt-m68k
new file mode 100644
index 0000000..493d702
--- /dev/null
+++ b/gdb/testsuite/config/mt-m68k
@@ -0,0 +1 @@
+CFLAGS_FOR_TARGET = -Tidp.ld -nostartfiles
diff --git a/gdb/testsuite/config/mt-mips-ecoff b/gdb/testsuite/config/mt-mips-ecoff
new file mode 100644
index 0000000..90dd031
--- /dev/null
+++ b/gdb/testsuite/config/mt-mips-ecoff
@@ -0,0 +1,2 @@
+CFLAGS = -I/s1/cygnus/dejagnu/mips-idt-ecoff/include -g
+LDFLAGS = -nostartfiles /s1/cygnus/dejagnu/mips-idt-ecoff/crt0.o -L/s1/cygnus/dejagnu/mips-idt-ecoff -g
diff --git a/gdb/testsuite/config/mt-netware b/gdb/testsuite/config/mt-netware
new file mode 100644
index 0000000..10d1ce4
--- /dev/null
+++ b/gdb/testsuite/config/mt-netware
@@ -0,0 +1 @@
+LDFLAGS = -r
diff --git a/gdb/testsuite/config/mt-slite b/gdb/testsuite/config/mt-slite
new file mode 100644
index 0000000..74e75a2
--- /dev/null
+++ b/gdb/testsuite/config/mt-slite
@@ -0,0 +1,8 @@
+LIBS = -lc -lg -lgcc
+CFLAGS = -g -Dusestubs
+LDFLAGS = ` \
+  if [ -f $${rootme}/../../newlib/Makefile ]; then \
+    echo -L$${rootsrc}/../../libgloss/ex93x -L$${rootme}/../../libgloss/ex93x -Tex93x.ld -nostartfiles -nostdlib -N; \
+  else \
+    echo -Tex93x.ld -nostartfiles -nostdlib -N; \
+  fi`
diff --git a/gdb/testsuite/config/mt-sparc-aout b/gdb/testsuite/config/mt-sparc-aout
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/gdb/testsuite/config/mt-sparc-aout
diff --git a/gdb/testsuite/config/mt-unix b/gdb/testsuite/config/mt-unix
new file mode 100644
index 0000000..d6e2c78
--- /dev/null
+++ b/gdb/testsuite/config/mt-unix
@@ -0,0 +1 @@
+CFLAGS_FOR_TARGET = -g
diff --git a/gdb/testsuite/config/mt-vxworks b/gdb/testsuite/config/mt-vxworks
new file mode 100644
index 0000000..d18bcb0
--- /dev/null
+++ b/gdb/testsuite/config/mt-vxworks
@@ -0,0 +1,2 @@
+CFLAGS = -g -Dvxworks
+LDFLAGS = -Xlinker -Ur
diff --git a/gdb/testsuite/config/netware.exp b/gdb/testsuite/config/netware.exp
new file mode 100644
index 0000000..2538ccf
--- /dev/null
+++ b/gdb/testsuite/config/netware.exp
@@ -0,0 +1,218 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by J.T. Conklin. (jtc@cygnus.com)
+
+load_lib gdb.exp
+load_lib remote.exp
+
+global shell_id
+
+global LD
+if ![info exists LD] then {
+	set LD [findfile "$base_dir/../../ld/ld.new"]
+}
+
+global NLMCONV
+if ![info exists NLMCONV] then {
+	set NLMCONV [findfile "$base_dir/../../binutils/nlmconv"]
+}
+
+#
+# gdb_version -- extract and print the version number of gcc
+#
+proc gdb_version {} {
+    default_gdb_version
+}
+
+#
+# gdb_unload -- unload a file if one is loaded
+#
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+proc gdb_load { arg } {
+    global gdb_prompt
+    global LD
+    global NLMCONV
+    global errorCode
+    global shell_id
+
+    # FIXME: this is wrong.
+    set targetname [target_info name];
+
+    set obj [file tail $arg]
+    set nlm "$obj.nlm"
+    set lnk "$obj.lnk"
+
+    # build *.lnk file
+    set fd [open $lnk w]
+    puts $fd "description \"[file tail $nlm]\""
+    puts $fd "screenname \"System Console\""
+    puts $fd "module clib.nlm"
+    puts $fd "module mathlib.nlm"
+    puts $fd "stack 32768"
+#    puts $fd "stack 64512"
+    puts $fd "debug"
+    # FIXME: don't hardcode location of prelude.o
+    puts $fd "input /s1/cygnus/dejagnu/i386-netware/lib/prelude.o"
+    puts $fd "input $arg"
+    puts $fd "output $nlm"
+    close $fd
+
+    # run nlmconv
+    verbose "Executing: $NLMCONV -l$LD -T$lnk" 1
+    catch "exec $NLMCONV -l$LD -T$lnk" output
+    if ![string match "" $output] then {
+	verbose $output 1
+    }
+    if ![string match "NONE" $errorCode] {
+	warning "Can't link $arg"
+
+	return -1
+    }
+    catch "exec rm -f $lnk"
+
+    # download
+    verbose "Downloading $nlm" 1
+    catch "exec cp $nlm /.NetWare/$targetname.nws/sys.nwv/tmp/x.nlm" output
+    if ![string match "" $output] then {
+	verbose $output 1
+	return -1
+    }
+
+    gdb_file_cmd $nlm
+}
+
+proc gdb_run_cmd { } {
+    global shell_id
+    global gdb_prompt
+    global timeout
+
+    set connhost [target_info name];
+    if [board_info $connhost exists serial] {
+	set serialport [board_info $connhost serial];
+    } else {
+	set serialport [board_info $connhost netport];
+    }
+
+    if [board_info $connhost exists baud] {
+	set baud [board_info $connhost baud];
+    } else {
+	set baud 9600;
+    }
+    # FIXME: This is wrong.
+    send "kill\n"
+    gdb_expect {
+	-re ".*Kill the program being debugged.*y or n. $" {
+	    send "y\n"
+	    exp_continue
+	}
+	-re ".*$gdb_prompt $" {}
+    }
+
+    verbose "Starting GDB stub on [target_info name]" 1
+    send -i $shell_id "load nlmstub BAUD=$baud x.nlm\r\n"
+
+    send "set remotebaud $baud\n"
+    gdb_expect {
+	-re "$gdb_prompt" {}
+	timeout {
+	    perror "Couldn't set remote baud rate"
+	    return
+	}
+    }
+
+    set otimeout $timeout
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    send "target remote $serialport\n"
+    gdb_expect {
+	-re "Couldn't establish connection to remote target" {
+	    send "target remote $serialport\n"
+	    exp_continue
+	}
+	-re "$gdb_prompt" {}
+	timeout {
+	    set timeout $otimeout
+	    verbose "Timeout restored to $timeout seconds" 2
+	    perror "Couldn't set remote target"
+	    return
+	}
+    }
+    set timeout $otimeout
+    verbose "Timeout restored to $timeout seconds" 2
+
+    send "continue\n"
+    gdb_expect {
+	"Continuing.$" {}
+    }
+
+    return
+}
+
+
+
+#
+# start the remote shell
+#
+
+set shell_prompt "Password:"
+set shell_id [remote_open target]
+
+if $shell_id<0 then {
+    warning "Couldn't connect to target"
+    return -1
+}
+
+if [string match "" $passwd] then {
+    stty -echo
+    send_user "Password: "
+    expect_user -re "(.*)\n"
+    send_user "\n"
+    set passwd "$expect_out(1,string)"
+    stty echo
+}
+
+send -i $shell_id "$passwd\n"
+gdb_expect {
+    -i $shell_id ":" {
+	verbose "Got termtype prompt" 0
+    }
+
+    -i $shell_id timeout {
+	warning "Connection timed out"
+	return -1
+    }
+}
+
+
+# FIXME: this is wrong.
+set shell_prompt "[string toupper [target_info name]]:"
+send -i $shell_id "1\n"
+
+gdb_expect {
+    -i $shell_id -re "$shell_prompt" {}
+    -i $shell_id timeout {
+	warning "Connection timed out"
+	return -1
+    }
+}
diff --git a/gdb/testsuite/config/nind.exp b/gdb/testsuite/config/nind.exp
new file mode 100644
index 0000000..d8aecdb
--- /dev/null
+++ b/gdb/testsuite/config/nind.exp
@@ -0,0 +1,49 @@
+# Test Framework Driver
+#   Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+load_lib gdb.exp
+
+#
+# gdb_load -- load a file into the debugger.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global gdb_prompt
+    global GDB
+    set loadfile [file tail $arg]
+    set loadpath [file dirname $arg]
+    send_user "Not implememted yet\n" ; return -1
+}
+
+#
+# gdb_start -- start GDB running
+#
+proc gdb_start { } {
+    global GDB
+    global GDBFLAGS
+    global spawn_id
+    global gdb_prompt
+    global verbose
+    send_user "Not implememted yet\n" ; return -1
+}
diff --git a/gdb/testsuite/config/proelf.exp b/gdb/testsuite/config/proelf.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/proelf.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/rom68k.exp b/gdb/testsuite/config/rom68k.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/rom68k.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/sh.exp b/gdb/testsuite/config/sh.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/sh.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/sim.exp b/gdb/testsuite/config/sim.exp
new file mode 100644
index 0000000..5d8a93d
--- /dev/null
+++ b/gdb/testsuite/config/sim.exp
@@ -0,0 +1,85 @@
+# Test Framework Driver for GDB driving a builtin simulator
+#   Copyright 1994, 1997, 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+load_lib gdb.exp
+
+#
+# gdb_target_sim
+# Set gdb to target the simulator
+#
+proc gdb_target_sim { } {
+    global gdb_prompt
+    global exit_status
+    
+    set target_sim_options "[board_info target gdb,target_sim_options]";
+
+    send_gdb "target sim $target_sim_options\n"
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	-re "Connected to the simulator.*$gdb_prompt $"	{
+	    verbose "Set target to sim"
+	}
+	timeout { 
+	    perror "Couldn't set target for simulator."
+	    cleanup
+	    exit $exit_status
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+}
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+
+    if [gdb_file_cmd $arg] then { return -1 }
+
+    gdb_target_sim
+
+    send_gdb "load\n"
+    set timeout 2400
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	-re ".*$gdb_prompt $" {
+	    if $verbose>1 then {
+		send_user "Loaded $arg into $GDB\n"
+	    }
+	    set timeout 30
+	    verbose "Timeout is now $timeout seconds" 2
+	    return 1
+	}
+	-re "$gdb_prompt $"     {
+	    if $verbose>1 then {
+		perror "GDB couldn't load."
+	    }
+	}
+	timeout {
+	    if $verbose>1 then {
+		perror "Timed out trying to load $arg."
+	    }
+	}
+    }
+}
diff --git a/gdb/testsuite/config/slite.exp b/gdb/testsuite/config/slite.exp
new file mode 100644
index 0000000..c4cb139
--- /dev/null
+++ b/gdb/testsuite/config/slite.exp
@@ -0,0 +1,183 @@
+#   Copyright (C) 1993, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Ian Lance Taylor <ian@cygnus.com>.
+
+# GDB support routines for a board using the MIPS remote debugging
+# protocol.  These are actually pretty generic.
+
+# DejaGnu currently assumes that debugging is being done over the main
+# console port.  It would probably be more convenient for people using
+# IDT boards to permit the debugging port and the connected port to be
+# different, since an IDT board has two ports.  This would require
+# extending some of the tests in a fashion similar to that done for
+# VxWorks, because the test output would appear on the other port,
+# rather than being displayed by gdb.
+
+load_lib remote.exp
+load_lib gdb.exp
+set gdb_prompt "\\(gdb\\)"
+
+#
+# gdb_load -- load a file into the GDB. 
+#             Returns a 0 if there was an error,
+#                       1 if it load successfully.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global gdb_prompt
+    global GDB
+    global expect_out
+
+    set loadfile [file tail $arg]
+    set loadpath [file dirname $arg]
+
+    gdb_file_cmd $arg
+
+    if [target_info exists gdb_protocol] {
+	set protocol [target_info gdb_protocol];
+    } else {
+	set protocol "sparclite"
+    }
+
+    if [target_info exists serial] {
+	set targetname [target_info serial];
+	set command "target $protocol [target_info serial]\n";
+    } else {
+	if ![target_info exists netport] {
+	    perror "Need either netport or gdb_serial entry for [target_info name].";
+	    return -1;
+	}
+	set targetname [target_info netport];
+	set command "target $protocol udp [target_info netport]\n";
+    }
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    set try_count 0;
+    send_gdb $command;
+    gdb_expect {
+	 -re "Unknown response.*resetting the board.|remote timeout" {
+	    incr try_count;
+	    if { $try_count > 3 } {
+		set try_count 0;
+		reboot_target;
+		sleep 5;
+	    }
+	    sleep 1;
+	    send_gdb $command;
+	    exp_continue;
+	}
+	 -re "Remote target.*$gdb_prompt $" { }
+	 -re ".*SPARClite appears to be alive.*$gdb_prompt $"	{
+	    if $verbose>1 then {
+		send_user "Set target to $targetname\n"
+	    }
+	}
+	 timeout { 
+	    perror "Couldn't set SLITE target."
+	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
+	    return -1
+	}
+    }
+    
+    if [target_info exists gdb_load_offset] {
+	set offset "[target_info gdb_load_offset]";
+    } else {
+	set offset "";
+    }
+    if { 1 } {
+	if [is_remote host] {
+	    set arg [remote_download host $arg];
+	    if { $arg == "" } {
+		error "download failed"
+		return -1;
+	    }
+	}
+	send_gdb "load $arg $offset\n"
+	verbose "Loading $arg into $GDB" 2
+	set timeout 2400
+	verbose "Timeout is now $timeout seconds" 2
+	gdb_expect {
+	     -re "Loading.*$gdb_prompt $" {
+		verbose "Loaded $arg into $GDB" 1
+		set timeout 30
+		verbose "Timeout is now $timeout seconds" 2
+	    }
+	     -re "$gdb_prompt $"     {
+		if $verbose>1 then {
+		    perror "GDB couldn't load."
+		}
+	    }
+	     timeout {
+		if $verbose>1 then {
+		    perror "Timed out trying to load $arg."
+		}
+	    }
+	}
+    }
+    # Some SPARClite boards automagically do a run after the program is
+    # loaded.
+    if [target_info exists need_monitor_run] {
+	set timeout 10
+	verbose "Timeout is now $timeout seconds, doing monitor run" 2
+	send_gdb "monitor run\n";
+	sleep 2;
+	send_gdb "";
+	gdb_expect {
+	     -re ".*$gdb_prompt $" { verbose "Run command succeded" }
+	     default {
+		perror "error sending monitor run command";
+	    }
+	}
+    } else {
+	sleep 2;
+    }
+
+    if [target_info exists gdb_serial] {
+	set serial [target_info gdb_serial];
+    } else {
+	set serial [target_info serial];
+    }
+    send_gdb "target remote $serial\n"
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 -re ".*Kill it?.*y or n.*" {
+	    send_gdb "y\n";
+	    exp_continue
+	}
+	 -re ".*$gdb_prompt $"	{
+	    verbose "Set remote target to [target_info serial]" 2
+	}
+	 timeout {
+	    perror "Couldn't set remote target."
+	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
+	    return -1
+	}
+    }
+
+    if [info exists expect_out(buffer)] then {
+	send_log $expect_out(buffer)
+    }
+    return 0
+}
diff --git a/gdb/testsuite/config/sparclet.exp b/gdb/testsuite/config/sparclet.exp
new file mode 100644
index 0000000..1919aca
--- /dev/null
+++ b/gdb/testsuite/config/sparclet.exp
@@ -0,0 +1,391 @@
+#   Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Michael Snyder <msnyder@cygnus.com>.
+
+# GDB support routines for a board using the sparclet remote debugging
+# protocol.
+
+load_lib remote.exp
+load_lib gdb.exp
+
+#
+# Sparclet remote run command.
+#
+
+proc gdb_start { } {
+    global gdb_prompt
+
+    if ![file exists loader] {
+	global libdir
+	set loader loader;
+
+	if [target_info exists gdb_stub_offset] {
+	    set result [target_compile "${libdir}/stub-loader.c" $loader executable "libs=-Wl,-Ttext,[target_info gdb_stub_offset]"];
+	} else {
+	    set result [target_compile "${libdir}/stub-loader.c" $loader executable "ldscript=[target_info gdb_stub_ldscript]"];
+	}
+    }
+
+    verbose -log "$gdb_prompt is gdb prompt"
+
+    set result 0;
+    for { set y 0; } { $y < 4 } { incr y } {
+	if { [default_gdb_start] != 0 } {
+	    return -1;
+	}
+
+	if [target_info exists baud] {
+	    send_gdb "set remotebaud [target_info baud]\n"
+	    gdb_expect {
+		-re "$gdb_prompt" { }
+		default { 
+		    perror "Error setting baud rate."
+		    return -1;
+		}
+	    }
+	}
+
+	for {set x 1;} { $x < 4 } {incr x} {
+	    set result [gdb_sparclet_startup $result];
+	    if { $result > 0 } {
+		return 1;
+	    }
+	    # mmmmm, magic numbers.
+	    if { $result == -42 || $result == -43 } {
+		break;
+	    } else {
+		reboot_target;
+	    }
+	}
+	if { $x == 4 } {
+	    return -1;
+	}
+	gdb_exit;
+	sleep 5;
+    }
+    return -1;
+}
+
+proc gdb_sparclet_startup { arg } {
+    global gdb_prompt
+    global GDB
+    global verbose
+
+    set is_running_stub 0;
+
+    if [target_info exists serial] {
+	set serial [target_info serial];
+    } else {
+	set serial [target_info netport];
+    }
+    set protocol [target_info gdb_protocol];
+    set check_stub 1;
+    if { $arg != -42 } {
+	send_gdb "target $protocol $serial\n";
+	# 10 seconds may be a bit short.
+	gdb_expect 10 {
+	    -re "already.*y or n." {
+		gdb_send "y\n";
+		exp_continue;
+	    }
+	    -re "Remote target.*connected to.*$gdb_prompt" { set check_stub 0; }
+	    -re "$gdb_prompt" { }
+	    timeout { }
+	}
+	if { $check_stub } {
+	    verbose "timed out, checking if stub is already running"
+	    send_gdb "\003";
+	    sleep 1;
+	    send_gdb "\003";
+	    gdb_expect 10 {
+		-re "$gdb_prompt" { }
+		default {
+		    remote_close host;
+		    return -42;
+		}
+	    }
+	}
+    }
+    if [target_info exists gdb_serial] {
+	set gdb_serial [target_info gdb_serial];
+    } else {
+	set gdb_serial $serial;
+    }
+    if { $check_stub } {
+	send_gdb "target remote $gdb_serial\n";
+	gdb_expect 15 {
+	    -re "Remote debugging.*$gdb_prompt" {
+		verbose "stub is already running"
+		set is_running_stub 1;
+	    }
+	    default {
+		warning "board isn't responding";
+		remote_close host;
+		remote_reboot target;
+		return -43;
+	    }
+	}
+    }
+
+    if { $is_running_stub == 0 } {
+	global srcdir
+
+	if [is_remote host] {
+	    set loader [remote_download host "loader"];
+	} else {
+	    set loader "loader";
+	}
+	send_gdb "file $loader\n";
+	gdb_expect {
+	     -re "A program is being debug.*Kill it.*y or n. $" {
+		send_gdb "y\n"
+		exp_continue
+	    }
+	     -re "Load new symbol table.*y or n. $" {
+		send_gdb "y\n"
+		exp_continue
+	    }
+	     -re "Reading symbols from.*done..*$gdb_prompt $" {}
+	     -re "$gdb_prompt $" { perror "GDB couldn't find loader" }
+	     timeout { 
+		perror "(timeout) read symbol file" ; 
+		return -1
+	    }
+	}
+
+	send_gdb "target $protocol $serial\n";
+	gdb_expect {
+	     -re "Remote target.*connected to.*$gdb_prompt" { }
+	     default {
+		perror "Error reconnecting to board.";
+		return -1;
+	    }
+	}
+
+	send_gdb "load $loader [target_info gdb_stub_offset]\n"
+	verbose "Loading $loader into $GDB" 2
+	set no_run_command 0;
+	gdb_expect 1200 {
+	     -re "Loading.*$gdb_prompt $" {
+		verbose "Loaded $loader into $GDB" 1
+	    }
+	    -re "Transfer rate:.*Switching to remote protocol.*Remote debugging" {
+		set no_run_command 1;
+	    }
+	     -re "$gdb_prompt $"     {
+		if $verbose>1 then {
+		    perror "GDB couldn't load."
+		}
+	    }
+	     timeout {
+		if $verbose>1 then {
+		    perror "Timed out trying to load $arg."
+		}
+	    }
+	}
+
+	if !$no_run_command {
+	    send_gdb "run\n";
+	    gdb_expect 60 {
+		-re "A program is being debug.*Kill it.*y or n. $" {
+		    send_gdb "y\n"
+		    exp_continue
+		}
+		-re "The program being debugged .*y or n. $" {
+		    send_gdb "y\n"
+		    exp_continue
+		}
+		-re "Starting program:.*loader.*$" { 
+		    verbose "Starting loader succeeded" 
+		}
+		timeout { 
+		    perror "(timeout) starting the loader" ; 
+		    return -1 
+		}
+		default {
+		    perror "error starting the loader";
+		}
+	    }
+	}
+	sleep 2;
+	send_gdb ""
+	sleep 1;
+	send_gdb ""
+	verbose "Sent ^C^C"
+	gdb_expect 10 {
+	     -re "Give up .and stop debugging it.*$" {
+		send_gdb "y\n"
+		exp_continue
+	    }
+	    -re "$gdb_prompt $" { 
+		verbose "Running loader succeeded" 
+	    }
+	    timeout { 
+		warning "(timeout) interrupting the loader" ;
+		remote_close host;
+	    }
+	    default {
+		warning "error interrupting the loader";
+	    }
+	}
+
+	gdb_exit;
+	return [gdb_start];
+    }
+    return 1;
+}
+
+proc gdb_run_cmd { args } {
+    global gdb_prompt
+
+    gdb_breakpoint exit;
+    send_gdb "set \$fp=0\n";
+    gdb_expect {
+	 -re "$gdb_prompt" { }
+    }
+    # This is needed for the SparcLite. Whee.
+    if [target_info exists gdb,start_symbol] {
+	set start_comm "jump *[target_info gdb,start_symbol]\n";
+    } else {
+	set start_comm "jump *start\n";
+    }
+    send_gdb "break copyloop\n";
+    gdb_expect 10 {
+	-re "Breakpoint.*$gdb_prompt $" {
+	    set start_comm "continue\n";
+	}
+	-re "$gdb_prompt $" { }
+	timeout { warning "break copyloop failed badly"; }
+    }
+    send_gdb $start_comm;
+    gdb_expect 10 {
+	-re "y or n. $" {
+	    remote_send host "y\n"
+	    exp_continue;
+	}
+	-re "Breakpoint.*in copyloop.*$gdb_prompt $" {
+	    remote_send host "jump relocd\n";
+	    exp_continue;
+	}
+	-re "Continuing at.*\[\r\n\]" { }
+	default {
+	    return -1;
+	}
+    }
+
+    return "";
+}
+
+
+#
+# gdb_load -- load a file into the GDB. 
+#             Returns a 0 if there was an error,
+#                       1 if it load successfully.
+#
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global gdb_prompt
+    global GDB
+    global expect_out
+
+    set loadfile [file tail $arg]
+    set loadpath [file dirname $arg]
+
+    set protocol [target_info gdb_protocol];
+
+    if [is_remote host] {
+	set arg [remote_download host $arg];
+    }
+    send_gdb "file $arg\n"
+    gdb_expect 30 {
+	 -re "A program is being debug.*Kill it.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+         -re "Load new symbol table.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	 -re "Reading symbols from.*done..*$gdb_prompt $" {}
+	 -re "$gdb_prompt $" { perror "GDB couldn't read file" }
+	 timeout { 
+	    perror "(timeout) read symbol file" ; 
+	    return -1 
+	}
+    }
+
+    if [target_info exists gdb_serial] {
+	set gdb_serial [target_info gdb_serial];
+    } else {
+	if [target_info exists serial] {
+	    set gdb_serial [target_info serial];
+	} else {
+	    set gdb_serial [target_info netport];
+	}
+    }
+    send_gdb "target remote $gdb_serial\n"
+    gdb_expect 30 {
+	-re "Kill it?.*y or n.*" {
+	    send_gdb "y\n";
+	    exp_continue
+	}
+	-re "$gdb_prompt $"	{
+	    verbose "Set remote target to $gdb_serial" 2
+	}
+	timeout { 
+	    perror "Couldn't set remote target."
+	    return -1
+	}
+    }
+    if [target_info exists gdb_load_offset] {
+	set offset "[target_info gdb_load_offset]";
+    } else {
+	set offset "";
+    }
+    send_gdb "load $arg $offset\n"
+    verbose "Loading $arg into $GDB" 2
+    gdb_expect 1200 {
+	 -re "Loading.*$gdb_prompt $" {
+	    verbose "Loaded $arg into $GDB" 1
+	}
+	 -re "$gdb_prompt $"     {
+	    if $verbose>1 then {
+		perror "GDB couldn't load."
+	    }
+	}
+	 timeout {
+	    if $verbose>1 then {
+		perror "Timed out trying to load $arg."
+	    }
+	}
+    }
+    send_gdb "list main\n";
+    gdb_expect 60 {
+	 -re "$gdb_prompt" { }
+	 default {
+	    perror "command for list main never completed";
+	    return -1;
+	}
+    }
+
+    return 0
+}
diff --git a/gdb/testsuite/config/udi.exp b/gdb/testsuite/config/udi.exp
new file mode 100644
index 0000000..3a5d778
--- /dev/null
+++ b/gdb/testsuite/config/udi.exp
@@ -0,0 +1,112 @@
+# Test Framework Driver for GDB driving Universal Debug Interface on 29K
+#   Copyright 1988, 1990, 1991, 1992, 1993, 1994, 1997 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+load_lib gdb.exp
+
+#
+# gdb_target_udi
+# Set gdb to the desired UDI target
+#
+proc gdb_target_udi { } {
+    global gdb_prompt
+    global verbose
+    global exit_status
+
+    set targetname [target_info mondfe,name];
+    # set targets hostname
+    send_gdb "target udi $targetname\n"
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	-re "target udi $targetname\[\r\n\]+" {
+	    exp_continue
+	}
+	-re "TIP UDI 1.2 Conformant.*$gdb_prompt $"	{
+	    verbose "Set target to $targetname"
+	}
+	-re "TIP-ipc WARNING,.*failed:" {
+	    warning "$expect_out(buffer)"
+	}
+	-re "TIP-ipc ERROR,.*failed:" {
+	    perror "$expect_out(buffer)"
+	}
+	-re "A program is being debugged already.  Kill it\? \(y or n\)" {
+	    send "y\n"
+	    exp_continue
+	}
+	timeout { 
+	    perror "Couldn't set target for UDI."
+	    cleanup
+	    exit $exit_status
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+}
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+
+proc gdb_load { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+
+    if [gdb_file_cmd $arg] {
+	return -1 
+    }
+
+    gdb_target_udi
+}
+
+#
+# gdb_start -- start GDB running. This assumes that there the
+#              UDICONF enviroment variable is set.
+#
+proc gdb_start { } {
+    global env;
+
+    set env(UDICONF) [target_info mondfe,udi_soc];
+    default_gdb_start
+    verbose "Setting up target, Please wait..."
+    gdb_target_udi
+}
+
+#
+# gdb_exit -- exit gdb
+#
+proc gdb_exit { } {
+    catch default_gdb_exit
+    set in [open [concat "|ls -F"] r]
+    while {[gets $in line]>-1} {
+	if [regexp "=$" $line] then {
+	    set line [string trimright $line "="]
+	    verbose "Removing the $line named socket"
+	    exec rm -f $line
+	}
+    }
+    close $in
+}
diff --git a/gdb/testsuite/config/unix.exp b/gdb/testsuite/config/unix.exp
new file mode 100644
index 0000000..321ad54
--- /dev/null
+++ b/gdb/testsuite/config/unix.exp
@@ -0,0 +1,29 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+# Set a default timeout to be used for the tests under UNIX, rather than
+# accepting whatever default dejagnu gives us (apparently 10 seconds).
+# When running the tests over NFS, under somewhat heavy load, 10 seconds
+# does not seem to be enough.  Try starting with 60.
+set timeout 60
+verbose "Timeout is now $timeout seconds" 2
+
+load_lib gdb.exp
diff --git a/gdb/testsuite/config/unknown.exp b/gdb/testsuite/config/unknown.exp
new file mode 100644
index 0000000..f3cfb79
--- /dev/null
+++ b/gdb/testsuite/config/unknown.exp
@@ -0,0 +1,21 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+perror "Sorry, there is no support for this target"
+exit 1
diff --git a/gdb/testsuite/config/vr4300.exp b/gdb/testsuite/config/vr4300.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/vr4300.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/vr5000.exp b/gdb/testsuite/config/vr5000.exp
new file mode 100644
index 0000000..e6ade13
--- /dev/null
+++ b/gdb/testsuite/config/vr5000.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/monitor.exp
diff --git a/gdb/testsuite/config/vx.exp b/gdb/testsuite/config/vx.exp
new file mode 100644
index 0000000..9c90606
--- /dev/null
+++ b/gdb/testsuite/config/vx.exp
@@ -0,0 +1,130 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+#
+# load support libraries
+#
+load_lib remote.exp
+load_lib gdb.exp
+
+set shell_prompt "->"
+set gdb_prompt "\\(vxgdb\\)"
+
+#
+# gdb_version -- extract and print the version number of gcc
+#
+proc gdb_version {} {
+    default_gdb_version
+}
+
+#
+# gdb_load -- load a file into the debugger.
+# We have to stop and start gdb each time we do this, because when
+# vxgdb loads two files in a row, the symbols in the first file loaded
+# take precedence. Returns -1 on error, else 0.
+#
+proc gdb_load { arg } {
+    set result 0
+
+    if { [remote_ld target $arg] != 0 } {
+	perror "Couldn't load $arg"
+	return -1
+    }
+
+    return [gdb_file_cmd $arg]
+}
+
+#
+# gdb_start -- start gdb running
+#
+proc gdb_start { } {
+    global gdb_prompt
+    global verbose
+    global connectmode
+    global reboot
+
+    # get a connection to the board
+    for { set x 0; } { $x < 3 } { incr x } {
+	set shell_id [remote_open target]
+	if { $shell_id > 0 } {
+	    verbose "Spawn id for remote shell is $shell_id"
+
+	    set timeout 10
+	    verbose "Timeout is now $timeout seconds" 2
+
+	    set state [spawn_vxgdb];
+	    if { $state == "pass" } {
+		return 0;
+	    }
+	    if { $state == "fail" } {
+		return -1;
+	    }
+	}
+	remote_reboot target;
+    }
+}
+
+proc spawn_vxgdb { } {
+    global gdb_prompt
+
+    default_gdb_start
+
+    # set the default arguments to "main", so that "run" with no
+    # arguments will work correctly.
+    send_gdb "set args main\n"
+    gdb_expect -re ".*$gdb_prompt $" {}
+
+    verbose "Setting up target, Please wait..."
+    # set targets hostname
+    send_gdb "target vxworks [target_info hostname]\n"
+    set timeout 60
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	-re "Done\..*$gdb_prompt $"	{
+	    verbose "Set target to [target_info hostname]" 1
+	    set timeout 10;
+	    return "pass";
+	}
+	-re "net_connect: RPC: (Program not registered|.*Timed out).*$" {
+	    warning "Couldn't set GDB to target [target_info netport]."
+	}
+	timeout {
+	    warning "Couldn't set target for vxworks."
+	}
+    }
+    return "retry";
+}
+
+proc gdb_exit { } {
+    remote_close target;
+    catch default_gdb_exit
+}
+
+#expect_after {
+#    "<return>"		   { send "\n"; perror "Window too small." }
+#    -re "\(y or n\) " 	   { send "n\n"; perror "Got interactive prompt." }
+#    buffer_full		   { perror "internal buffer is full." }
+#    eof			   { perror "eof -- pty is hosed." }
+#    timeout			   { perror "timeout." }
+#    "virtual memory exhausted" { perror "virtual memory exhausted." }
+#    "Undefined command"	   { perror "send string probably wrong." }
+#}
+
diff --git a/gdb/testsuite/config/vxworks.exp b/gdb/testsuite/config/vxworks.exp
new file mode 100644
index 0000000..f9c50c8
--- /dev/null
+++ b/gdb/testsuite/config/vxworks.exp
@@ -0,0 +1,20 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+load_lib ../config/vx.exp
diff --git a/gdb/testsuite/config/vxworks29k.exp b/gdb/testsuite/config/vxworks29k.exp
new file mode 100644
index 0000000..3d4c53c
--- /dev/null
+++ b/gdb/testsuite/config/vxworks29k.exp
@@ -0,0 +1,27 @@
+#   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# DejaGnu@cygnus.com
+
+# This file was written by Brendan Kehoe (brendan@cygnus.com).
+
+# We need this file here because the targetname for the 29k board
+# is `vxworks29k', not `vxworks'.  That way other tools (e.g., gcc)
+# can differentiate between the stuff run on that board and others.
+
+verbose "Loading ${srcdir}/config/vx.exp"
+source ${srcdir}/config/vx.exp
diff --git a/gdb/testsuite/configure b/gdb/testsuite/configure
new file mode 100755
index 0000000..bf663a2
--- /dev/null
+++ b/gdb/testsuite/configure
@@ -0,0 +1,1058 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --enable-shared         use shared libraries"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.13"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=gdb.base
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:577: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:598: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:616: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+# Directories to use in all configurations.
+configdirs="gdb.asm gdb.base gdb.c++ gdb.disasm gdb.chill gdb.threads gdb.trace"
+
+# Directories to use for a configuration which uses stabs.
+stabsdirs="gdb.stabs"
+
+	# this section is for targets that use stabs
+# add stabs tests for appropriate targets
+case "${target}" in
+	powerpc-*-aix*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	rs6000-*-aix*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-bsd*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-go32*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-linux*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-lynxos*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-sun-*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	hppa*-*-*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-elf*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*)		if test "x${with_stabs}" = x"yes" ; then
+			  configdirs="${configdirs} ${stabsdirs}"
+			fi ;;
+esac
+
+# Directory with HP specific tests. They will run only with HP's compilers. 
+# These tests will not work on other platforms and compilers.
+
+hpdir="gdb.hp"
+
+case "${target}" in
+ hppa*-*-hpux*) configdirs="${configdirs} ${hpdir}" ;;
+esac
+
+
+# Begin stuff to support --enable-shared
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  case "${enableval}" in
+  yes) shared=true ;;
+  no)  shared=false ;;
+  *) shared=true ;;
+esac
+fi
+RPATH_ENVVAR=LD_LIBRARY_PATH
+# If we have shared libraries, try to set RPATH_ENVVAR reasonably.
+if test "${shared}" = "true"; then
+  case "${host}" in
+  *-*-hpux*)
+    RPATH_ENVVAR=SHLIB_PATH
+    ;;
+  esac
+fi
+
+# End stuff to support --enable-shared
+
+# configure the subdirectories too
+subdirs="$configdirs"
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.13"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g
+s%@subdirs@%$subdirs%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+if test "$no_recursion" != yes; then
+
+  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  ac_sub_configure_args=
+  ac_prev=
+  for ac_arg in $ac_configure_args; do
+    if test -n "$ac_prev"; then
+      ac_prev=
+      continue
+    fi
+    case "$ac_arg" in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+      ac_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+      ac_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
+    esac
+  done
+
+  for ac_config_dir in $configdirs; do
+
+    # Do not complain, so a configure script can configure whichever
+    # parts of a large source tree are present.
+    if test ! -d $srcdir/$ac_config_dir; then
+      continue
+    fi
+
+    echo configuring in $ac_config_dir
+
+    case "$srcdir" in
+    .) ;;
+    *)
+      if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :;
+      else
+        { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; }
+      fi
+      ;;
+    esac
+
+    ac_popdir=`pwd`
+    cd $ac_config_dir
+
+      # A "../" for each directory in /$ac_config_dir.
+      ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'`
+
+    case "$srcdir" in
+    .) # No --srcdir option.  We are building in place.
+      ac_sub_srcdir=$srcdir ;;
+    /*) # Absolute path.
+      ac_sub_srcdir=$srcdir/$ac_config_dir ;;
+    *) # Relative path.
+      ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;;
+    esac
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f $ac_sub_srcdir/configure; then
+      ac_sub_configure=$ac_sub_srcdir/configure
+    elif test -f $ac_sub_srcdir/configure.in; then
+      ac_sub_configure=$ac_configure
+    else
+      echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2
+      ac_sub_configure=
+    fi
+
+    # The recursion is here.
+    if test -n "$ac_sub_configure"; then
+
+      # Make the cache file name correct relative to the subdirectory.
+      case "$cache_file" in
+      /*) ac_sub_cache_file=$cache_file ;;
+      *) # Relative path.
+        ac_sub_cache_file="$ac_dots$cache_file" ;;
+      esac
+
+      echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir"
+      # The eval makes quoting arguments work.
+      if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir
+      then :
+      else
+        { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; }
+      fi
+    fi
+
+    cd $ac_popdir
+  done
+fi
+
diff --git a/gdb/testsuite/configure.in b/gdb/testsuite/configure.in
new file mode 100644
index 0000000..83356a9
--- /dev/null
+++ b/gdb/testsuite/configure.in
@@ -0,0 +1,72 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.12.1)
+AC_INIT(gdb.base)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
+AC_CANONICAL_SYSTEM
+
+# Directories to use in all configurations.
+configdirs="gdb.asm gdb.base gdb.c++ gdb.disasm gdb.chill gdb.threads gdb.trace"
+
+# Directories to use for a configuration which uses stabs.
+stabsdirs="gdb.stabs"
+
+	# this section is for targets that use stabs
+# add stabs tests for appropriate targets
+case "${target}" in
+	powerpc-*-aix*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	rs6000-*-aix*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-bsd*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-go32*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-linux*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-lynxos*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-sun-*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	hppa*-*-*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*-*-elf*)	configdirs="${configdirs} ${stabsdirs}" ;;
+	*)		if test "x${with_stabs}" = x"yes" ; then
+			  configdirs="${configdirs} ${stabsdirs}"
+			fi ;;
+esac
+
+# Directory with HP specific tests. They will run only with HP's compilers. 
+# These tests will not work on other platforms and compilers.
+
+hpdir="gdb.hp"
+
+case "${target}" in
+ hppa*-*-hpux*) configdirs="${configdirs} ${hpdir}" ;;
+esac
+
+
+# Begin stuff to support --enable-shared
+AC_ARG_ENABLE(shared,
+[  --enable-shared         use shared libraries],
+[case "${enableval}" in
+  yes) shared=true ;;
+  no)  shared=false ;;
+  *) shared=true ;;
+esac])dnl
+RPATH_ENVVAR=LD_LIBRARY_PATH
+# If we have shared libraries, try to set RPATH_ENVVAR reasonably.
+if test "${shared}" = "true"; then
+  case "${host}" in
+  *-*-hpux*)
+    RPATH_ENVVAR=SHLIB_PATH
+    ;;
+  esac
+fi
+AC_SUBST(RPATH_ENVVAR)
+# End stuff to support --enable-shared
+
+# configure the subdirectories too
+AC_CONFIG_SUBDIRS($configdirs)
+
+dnl AC_SUBST(gdb_target_cpu)
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.asm/Makefile.in b/gdb/testsuite/gdb.asm/Makefile.in
new file mode 100644
index 0000000..ce169b5
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/Makefile.in
@@ -0,0 +1,33 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+EXECUTABLES =
+
+# uuencoded format to avoid SCCS/RCS problems with binary files.
+CROSS_EXECUTABLES =
+
+all:
+	@echo "Nothing to be done for all..."
+
+info:
+install-info:
+dvi:
+install:
+uninstall: force
+installcheck:
+check:
+
+clean mostlyclean:
+	-rm -f *~ *.o a.out xgdb *.x $(CROSS_EXECUTABLES) *.ci *.tmp
+	-rm -f core core.coremaker coremaker.core corefile $(EXECUTABLES)
+	-rm -f twice-tmp.c
+
+distclean maintainer-clean realclean: clean
+	-rm -f *~ core
+	-rm -f Makefile config.status config.log
+	-rm -f arch.inc
+	-rm -f *-init.exp
+	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
+
+Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.asm/asm-source.exp b/gdb/testsuite/gdb.asm/asm-source.exp
new file mode 100644
index 0000000..6c2cab9
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/asm-source.exp
@@ -0,0 +1,99 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+# 
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+# 
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+#
+# This file was written by Kendra.
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# Test debugging assembly level programs.
+# This file uses asmsrc[12].s for input.
+#
+
+set prms_id 0
+set bug_id 0
+
+if [istarget "d10v-*-*"] then {
+    set asm-arch d10v
+} else {
+    verbose "Skipping assembly source test -- not implemented for this target."
+    return 
+}
+
+set testfile "asm-source"
+set binfile ${objdir}/${subdir}/${testfile}
+set src1 ${srcdir}/${subdir}/asmsrc1.s
+set src2 ${srcdir}/${subdir}/asmsrc2.s
+
+set asm-flags "-Wa,-gstabs,-I${srcdir}/${subdir},-I${objdir}/${subdir}"
+
+if {[gdb_compile ${src1} asmsrc1.o object "additional_flags=${asm-flags}"] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if {[gdb_compile ${src2} asmsrc2.o object "additional_flags=${asm-flags}"] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "asmsrc1.o asmsrc2.o" ${binfile} executable "ldflags=-nodefaultlibs"] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+remote_exec build "mv asmsrc1.o asmsrc2.o ${objdir}/${subdir}"
+
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# Run to `main' where we begin our tests.
+#
+
+if ![runto_main] then {
+    gdb_suppress_tests
+}
+
+# Execute the `f' command and see if the result includes source info.
+gdb_test "f" "asmsrc1\[.\]s:18.*several_nops" "f at main"
+
+# See if we properly `next' over a macro with several insns.
+gdb_test "n" "22\[ 	\]*.*foo2" "next over macro"
+
+# See if we can properly `step' into a subroutine call.
+gdb_test "s" "8\[ 	\]*.*" "step into foo2"
+
+# See if `f' prints the right source file.
+gdb_test "f" ".*asmsrc2\[.\]s:8.*" "f in foo2"
+
+# `next' one insn (or macro) to set up our stackframe (for the following bt).
+gdb_test "n" "12\[ 	\]*.*foo3" "n in foo2"
+
+# See if `bt' prints the right source files.
+gdb_test "bt" "\#0.*foo2.*asmsrc2\[.\]s:12.*\#1.*main.*asmsrc1\[.\]s:22" "bt in foo2"
+
+# Step into another subroutine which lives back in the first source file.
+gdb_test "s" "" "s 2"
+
+# Next over insns to set up the stack frame.
+gdb_test "n" "" "n 2"
+
+# Now see if `bt' is correct.
+gdb_test "bt" "\#0.*foo3.*asmsrc1\[.\]s:33.*\#1.*foo2.*asmsrc2\[.\]s:12.*\#2.*main.*asmsrc1\[.\]s:22" "bt in foo3"
diff --git a/gdb/testsuite/gdb.asm/asmsrc1.s b/gdb/testsuite/gdb.asm/asmsrc1.s
new file mode 100644
index 0000000..be10280
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/asmsrc1.s
@@ -0,0 +1,37 @@
+	.include "common.inc"
+	.include "arch.inc"
+
+comment "main routine for assembly source debugging test"
+comment "This particular testcase uses macros in <arch>.inc to achieve"
+comment "machine independence.  This file must be compiled with -Darch=foo."
+
+comment "WARNING: asm-source.exp checks for line numbers printed by gdb,"
+comment "therefore be careful about changing this file without also changing"
+comment "asm-source.exp."
+
+	.global main
+main:
+	enter
+
+comment "Call a macro that consists of several lines of assembler code."
+
+	several_nops
+
+comment "Call a subroutine in another file."
+
+	call foo2
+
+comment "All done."
+
+	exit0
+
+comment "A routine for foo2 to call."
+
+	.global foo3
+foo3:
+	enter
+	leave
+
+	.global exit
+exit:
+	exit0
diff --git a/gdb/testsuite/gdb.asm/asmsrc2.s b/gdb/testsuite/gdb.asm/asmsrc2.s
new file mode 100644
index 0000000..3d48c6c
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/asmsrc2.s
@@ -0,0 +1,16 @@
+	.include "common.inc"
+	.include "arch.inc"
+
+comment "Second file in assembly source debugging testcase."
+
+	.global foo2
+foo2:
+	enter
+
+comment "Call someplace else."
+
+	call foo3
+
+comment "All done, return."
+
+	leave
diff --git a/gdb/testsuite/gdb.asm/common.inc b/gdb/testsuite/gdb.asm/common.inc
new file mode 100644
index 0000000..7cca3ab
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/common.inc
@@ -0,0 +1,18 @@
+	.macro comment text
+	.endm
+
+	comment "Can't rely on assembler comment character so do this."
+
+	.macro include arch file
+	.include "\arch\file"
+	.endm
+
+comment "arch.inc is responsible for defining the following macros:"
+comment "enter - subroutine prologue"
+comment "leave - subroutine epilogue"
+comment "call - call a named subroutine"
+comment "several_nops - execute several (typically 4) nops"
+comment "exit0 - exit (0)"
+
+comment "macros to label a subroutine may also eventually be needed"
+comment "i.e. .global foo\nfoo:\n"
diff --git a/gdb/testsuite/gdb.asm/configure b/gdb/testsuite/gdb.asm/configure
new file mode 100755
index 0000000..fedef73
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/configure
@@ -0,0 +1,950 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=asm-source.exp
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+archinc=common.inc
+case ${target} in
+d10v-*-*) archinc=d10v.inc ;;
+esac
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$archinc"
+ac_dests="arch.inc"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+  set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+  set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+  echo "linking $srcdir/$ac_source to $ac_dest"
+
+  if test ! -r $srcdir/$ac_source; then
+    { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+  fi
+  rm -f $ac_dest
+
+  # Make relative symlinks.
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+    # The dest file is in a subdirectory.
+    test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+    ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dest_dir_suffix.
+    ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dest_dir_suffix= ac_dots=
+  fi
+
+  case "$srcdir" in
+  [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+  *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+  esac
+
+  # Make a symlink if possible; otherwise try a hard link.
+  if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+    ln $srcdir/$ac_source $ac_dest; then :
+  else
+    { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+  fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.asm/configure.in b/gdb/testsuite/gdb.asm/configure.in
new file mode 100644
index 0000000..8ff68ef
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/configure.in
@@ -0,0 +1,22 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(asm-source.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+dnl In default case we need to link with some file so use common.inc.
+archinc=common.inc
+case ${target} in
+d10v-*-*) archinc=d10v.inc ;;
+esac
+AC_LINK_FILES($archinc,arch.inc)
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.asm/d10v.inc b/gdb/testsuite/gdb.asm/d10v.inc
new file mode 100644
index 0000000..e39a498
--- /dev/null
+++ b/gdb/testsuite/gdb.asm/d10v.inc
@@ -0,0 +1,28 @@
+	comment "subroutine prologue"
+	.macro enter
+	st r13,@-sp
+	.endm
+
+	comment "subroutine epilogue"
+	.macro leave
+	ld r13,@sp+
+	jmp r13
+	.endm
+
+	.macro call subr
+	bl \subr
+	.endm
+
+	.macro several_nops
+	nop
+	nop
+	nop
+	nop
+	.endm
+
+	comment "exit (0)"
+	.macro exit0
+	ldi r4, 1
+	ldi r0, 0
+	trap 15
+	.endm
diff --git a/gdb/testsuite/gdb.base/Makefile.in b/gdb/testsuite/gdb.base/Makefile.in
new file mode 100644
index 0000000..a5d6374
--- /dev/null
+++ b/gdb/testsuite/gdb.base/Makefile.in
@@ -0,0 +1,46 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+EXECUTABLES = all-types bitfields break \
+	call-ar-st call-rt-st call-strs callfuncs callfuncs2 commands \
+	compiler condbreak constvars coremaker display \
+	ending-run exprs funcargs int-type interrupt \
+	jump langs \
+	list long_long \
+	mips_pro miscexprs nodebug opaque pointers pointers2 printcmds ptype \
+	recurse reread reread1 restore return run \
+	scope section_command setshow setvar \
+	shmain sigall signals smoke \
+	solib so-impl-ld so-indr-cl \
+	step-test structs structs2 twice-tmp varargs watchpoint whatis
+
+# uuencoded format to avoid SCCS/RCS problems with binary files.
+CROSS_EXECUTABLES = i486-elf i860-elf m68k-elf m68k-aout m68k-aout2  \
+	mips-ecoff sparc-aout sparc-elf
+
+MISCELLANEOUS = coremmap.data shr1.sl shr2.sl solib1.sl solib2.sl
+
+all:
+	@echo "Nothing to be done for all..."
+
+info:
+install-info:
+dvi:
+install:
+uninstall: force
+installcheck:
+check:
+
+clean mostlyclean:
+	-rm -f *~ *.o a.out xgdb *.x $(CROSS_EXECUTABLES) *.ci *.tmp
+	-rm -f core core.coremaker coremaker.core corefile $(EXECUTABLES)
+	-rm -f $(MISCELLANEOUS) twice-tmp.c
+
+distclean maintainer-clean realclean: clean
+	-rm -f *~ core
+	-rm -f Makefile config.status config.log
+	-rm -f *-init.exp
+	-rm -fr *.log summary detail *.plog *.sum *.psum site.*
+
+Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.base/README b/gdb/testsuite/gdb.base/README
new file mode 100644
index 0000000..556fc75
--- /dev/null
+++ b/gdb/testsuite/gdb.base/README
@@ -0,0 +1,13 @@
+Information about the various executables found in this test:
+
+             BFD              CPU     Objfile
+Executable   Target           Type    Type     Info about compilation machine
+----------   ------           ----    -------  -------------------------------
+i486-elf     elf-little       i486    ELF      NCR 3000, /usr/ccs/ATT/cc
+i860-elf     elf-big          i860    ELF      Stratus
+m68k-elf     elf-big          m68k    ELF      Amiga 3000 UX, /usr/ccs/bin/cc
+m68k-aout    a.out-newsos3    m68k    a.out    Sony NEWS
+m68k-aout2   a.out-sunos-big  m68k    a.out    SunOS 4.1, gcc cygnus-2.0.1
+sparc-aout   a.out-sunos-big  sparc   a.out    Sun 4, SunOS 4.1.1, gcc 2.1
+sparc-elf    elf-big          sparc   ELF      Sun 4, Solaris 1.0, gcc 2.0.2
+mips-ecoff   ecoff-bigmips    mips    ecoff    IRIX 4.0.1
diff --git a/gdb/testsuite/gdb.base/a1-selftest.exp b/gdb/testsuite/gdb.base/a1-selftest.exp
new file mode 100644
index 0000000..bc3893a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/a1-selftest.exp
@@ -0,0 +1,426 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if [is_remote target] {
+    return
+}
+
+if [istarget "m68k*-*-hpux*"] then {
+    # The top-level makefile passes CFLAGS= (no -g) for hp300.  This probably
+    # should be fixed (it is only needed for gcc bootstrapping, not gdb),
+    # but until then.....
+    setup_xfail "*-*-*"
+    fail "cannot test self if compiled without debug info"
+    return -1
+}
+
+# Not all of the lines of code near the start of main are executed for
+# every machine.  Also, optimization may reorder some of the lines.
+# So all we do is try to step or next over everything until we get
+# to a line that we know is always executed.
+
+proc do_steps_and_nexts {} {
+    global gdb_prompt
+    global srcdir
+ 
+    gdb_reinitialize_dir $srcdir/..
+
+    for {set count 0} {$count < 20} {incr count} {
+	send_gdb "list\n"
+	gdb_expect {
+	    -re ".*symarg = NULL.*$gdb_prompt $" {
+		set description "step over symarg initialization"
+		set command "step"
+	    }
+	    -re ".*execarg = NULL.*$gdb_prompt $" {
+		set description "step over execarg initialization"
+		set command "step"
+	    }
+	    -re ".*corearg = NULL.*$gdb_prompt $" {
+		set description "step over corearg initialization"
+		set command "step"
+	    }
+	    -re ".*cdarg = NULL.*$gdb_prompt $" {
+		set description "step over cdarg initialization"
+		set command "step"
+	    }
+	    -re ".*ttyarg = NULL.*$gdb_prompt $" {
+		set description "step over ttyarg initialization"
+		set command "step"
+	    }
+	    -re ".*time_at_startup = get_run_time.*$gdb_prompt $" {
+		set description "next over get_run_time and everything it calls"
+		set command "next"
+	    }
+	    -re ".*START_PROGRESS.*$gdb_prompt $" {
+		set description "next over START_PROGRESS and everything it calls"
+		set command "next"
+	    }
+	    -re ".*mac_init.*$gdb_prompt $" {
+		set description "next over mac_init and everything it calls"
+		set command "next"
+	    }
+	    -re ".*init_malloc.*$gdb_prompt $" {
+		set description "next over init_malloc and everything it calls"
+		set command "next"
+	    }
+	    -re ".*count . 0x3.*$gdb_prompt $" {
+		set description "next over conditional stack alignment code 1"
+		set command "next"
+	    }
+	    -re ".*if .i != 0.*$gdb_prompt $" {
+		set description "next over conditional stack alignment code 2"
+		set command "next"
+	    }
+	    -re ".*alloca .i - 4.*$gdb_prompt $" {
+		set description "next over conditional stack alignment alloca"
+		set command "next"
+	    }
+	    -re ".*SET_TOP_LEVEL.*$gdb_prompt $" {
+		set description "next over SET_TOP_LEVEL call"
+		set command "next"
+	    }
+	    -re ".*cmdsize = 1.*$gdb_prompt $" {
+		set description "step over cmdsize initialization"
+		set command "next"
+	    }
+	    -re ".*cmdarg = .* xmalloc.*$gdb_prompt $" {
+		set description "next over cmdarg initialization via xmalloc"
+		set command "next"
+	    }
+	    -re ".*ncmd = 0.*$gdb_prompt $" {
+		set description "next over ncmd initialization"
+		set command "next"
+	    }
+	    -re ".*dirsize = 1.*$gdb_prompt $" {
+		set description "next over dirsize initialization"
+		set command "next"
+	    }
+	    -re ".*dirarg = .* xmalloc.*$gdb_prompt $" {
+		return
+	    }
+	    -re "\[ \t\]+\{\r\n$gdb_prompt $" {
+		setup_xfail "mips-*-irix5*"
+		fail "$description ended up at odd location"
+	    }
+	    -re ".*main.c.*No such file or directory.*$gdb_prompt $" {
+		setup_xfail "rs6000-*-aix3*"
+		fail "must be able to list source lines"
+		return
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "unknown source line after $description"
+		return
+	    }
+	    default {
+		fail "unknown source line near main"
+		return
+	    }
+	}
+	send_gdb "$command\n"
+	gdb_expect {
+	    -re ".*No such file or directory.\r\n$gdb_prompt $" {
+		fail "$description (no source available)"
+	    }
+	    -re ".*A file or directory .* does not exist..\r\n$gdb_prompt $" {
+		fail "$description (no source available)"
+	    }
+	    -re ".*$gdb_prompt $" {
+		pass "$description"
+	    }
+	    timeout {
+		fail "$description (timeout)"
+	    }
+	}
+    }
+}
+
+proc test_with_self { executable } {
+    global gdb_prompt
+    global tool
+    global det_file
+    global decimal
+    global timeout
+
+    # load yourself into the debugger
+    # This can take a relatively long time, particularly for testing where
+    # the executable is being accessed over a network, or where gdb does not
+    # support partial symbols for a particular target and has to load the
+    # entire symbol table.  Set the timeout to 10 minutes, which should be
+    # adequate for most environments (it *has* timed out with 5 min on a
+    # SPARCstation SLC under moderate load, so this isn't unreasonable).
+    # After gdb is started, set the timeout to 30 seconds for the duration
+    # of this test, and then back to the original value.
+
+    set oldtimeout $timeout
+    set timeout 600
+    verbose "Timeout is now $timeout seconds" 2
+    if {[gdb_load $executable] <0} then {
+	set timeout $oldtimeout
+	verbose "Timeout is now $timeout seconds" 2
+	return -1
+    }
+    set timeout $oldtimeout
+    verbose "Timeout is now $timeout seconds" 2
+
+    # disassemble yourself
+    gdb_test "x/10i main" \
+	    "x/10i.*main.*main.$decimal.*main.$decimal.*" \
+	    "Disassemble main"
+
+    # Set a breakpoint at main
+    gdb_test "break main" \
+	    "Breakpoint.*at.* file.*, line.*" \
+	    "breakpoint in main"
+
+    # We'll need this when we send a ^C to GDB.  Need to do it before we
+    # run the program and gdb starts saving and restoring tty states.
+    # On Ultrix, we don't need it and it is really slow (because shell_escape
+    # doesn't use vfork).
+    if ![istarget "*-*-ultrix*"] then {
+	gdb_test "shell stty intr '^C'" "" \
+	    "set interrupt character in test_with_self"
+    }
+
+    # FIXME: If we put this after the run to main, the first list
+    # command doesn't print the same line as the current line where
+    # gdb is stopped.
+    gdb_test "set listsize 1" "" "set listsize to 1"
+
+    # run yourself
+    # It may take a very long time for the inferior gdb to start (lynx),
+    # so we bump it back up for the duration of this command.
+    set timeout 600
+
+    set description "run until breakpoint at main"
+    send_gdb "run -nw\n"
+    gdb_expect {
+	-re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.* at .*main.c:.*$gdb_prompt $" {
+	    pass "$description"
+	}
+	-re "Starting program.*Breakpoint \[0-9\]+,.*main .argc.*argv.*$gdb_prompt $" {
+	    xfail "$description (line numbers scrambled?)"
+	}
+	-re "vfork: No more processes.*$gdb_prompt $" {
+	    fail "$description (out of virtual memory)"
+	    set timeout $oldtimeout
+	    verbose "Timeout is now $timeout seconds" 2
+	    return -1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$description"
+	    set timeout $oldtimeout
+	    verbose "Timeout is now $timeout seconds" 2
+	    return -1
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+
+    set timeout $oldtimeout
+    verbose "Timeout is now $timeout seconds" 2
+
+    # do we have a version number ?
+    send_gdb "print version\n"
+    gdb_expect {
+	-re ".\[0-9\]+ = +0x.*\[0-9.\]+.*$gdb_prompt $" {
+	    pass "printed version"
+	}
+	-re ".\[0-9\]+ = +.+ +0x.*\[0-9.\]+.*$gdb_prompt $" {
+	    pass "printed version with cast"
+	}
+	-re ".*$gdb_prompt $"	{ fail "printed version" }
+	timeout		{ fail "(timeout) printed version" }
+    }
+
+    do_steps_and_nexts
+
+    gdb_test "print \"foo\"" ".\[0-9\]+ = \"foo\"" "print a string"
+
+    # do_steps_and_nexts left us ready to execute an xmalloc call,
+    # so give that a try.
+    # If we don't actually enter the xmalloc call when we give a
+    # step command that seems like a genuine bug.  It seems to happen
+    # on most RISC processors.
+    setup_xfail "alpha-*-*" "hppa*-*-*" "mips-*-*"
+    set description "step into xmalloc call"
+    send_gdb "step\n"
+    gdb_expect {
+	-re "xmalloc.*size=.*at.*utils.c.*$gdb_prompt $" {
+	    pass "$description"
+	}
+	-re ".*No such file or directory.\r\n$gdb_prompt $" {
+	    pass "$description (no source available)"
+	}
+	-re "A file or directory .* does not exist..\r\n$gdb_prompt $" {
+	    pass "$description (no source available)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$description"
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+
+    # start the "xgdb" process
+    send_gdb "continue\n"
+    gdb_expect {
+	-re "GNU gdb \[0-9\.\]*.*
+Copyright \[0-9\]* Free Software Foundation, Inc.*
+GDB is free software, covered by the GNU General Public License, and you are.*
+welcome to change it and/or distribute copies of it under certain conditions.*
+Type \"show copying\" to see the conditions.*
+There is absolutely no warranty for GDB.  Type \"show warranty\" for details.*
+This GDB was configured as .*$gdb_prompt $"\
+	    { pass "xgdb is at prompt" }
+	-re "GDB is free software and you are welcome to distribute copies of it.*
+ under certain conditions; type \"show copying\" to see the conditions..*
+There is absolutely no warranty for GDB; type \"show warranty\" for details..*
+GDB.*Copyright \[0-9\]+ Free Software Foundation, Inc..*$gdb_prompt $"\
+	    { pass "xgdb is at prompt (obsolescent gdb)" }
+	-re ".*$gdb_prompt $"       { fail "xgdb is at prompt" }
+	timeout	            { fail "(timeout) xgdb is at prompt" }
+    }
+    
+    # set xgdb prompt so we can tell which is which
+    send_gdb "set prompt (xgdb) \n"
+    gdb_expect {
+	-re "\[(\]xgdb\[)\].*\[(\]xgdb\[)\] $"	{ pass "Set xgdb prompt" }
+	-re ".*$gdb_prompt $"		{ fail "Set xgdb prompt" }
+	default				{ fail "(timeout) Set xgdb prompt" }
+    }
+    
+    # kill the xgdb process
+    set description "send ^C to child process"
+    send_gdb "\003"
+    gdb_expect {
+	-re "Program received signal SIGINT.*$gdb_prompt $" {
+	    pass "$description"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$description"
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+    
+    set description "send SIGINT signal to child process"
+    send_gdb "signal SIGINT\n"
+    gdb_expect {
+	-re "Continuing with signal SIGINT.*$gdb_prompt $" {
+	    pass "$description"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$description"
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+    
+    # get a stack trace
+    #
+    # This fails on some linux systems for unknown reasons.  On the
+    # systems where it fails, sometimes it works fine when run manually.
+    # The testsuite failures may not be limited to just aout systems.
+    setup_xfail "i*86-pc-linuxaout-gnu" "hppa*-*-hpux*"
+    set description "backtrace through signal handler"
+    send_gdb "backtrace\n"
+    gdb_expect {
+	-re "#0.*read.*in main \\(.*\\) at .*main\\.c.*$gdb_prompt $" {
+	    pass "$description"
+	}
+	-re ".*$gdb_prompt $" {
+	    # On the alpha, we hit the infamous problem about gdb
+	    # being unable to get the frame pointer (mentioned in
+	    # gdb/README).  As it is intermittent, there is no way to
+	    # XFAIL it which will give us an XPASS if the problem goes
+	    # away.
+	    setup_xfail "alpha*-*-osf*"
+	    fail "$description"
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+
+
+    # Set the timeout back to the value it had when we were called.
+    set timeout $oldtimeout
+    verbose "Timeout is now $timeout seconds" 2
+
+    # Restart gdb in case next test expects it to be started already.
+    return 0
+}
+
+# Find a pathname to a file that we would execute if the shell was asked
+# to run $arg using the current PATH.
+
+proc find_gdb { arg } {
+
+    # If the arg directly specifies an existing executable file, then
+    # simply use it.
+
+    if [file executable $arg] then {
+	return $arg
+    }
+
+    set result [which $arg]
+    if [string match "/" [ string range $result 0 0 ]] then {
+	return $result
+    }
+
+    # If everything fails, just return the unqualified pathname as default
+    # and hope for best.
+
+    return $arg
+}
+
+# Run the test with self.
+# Copy the file executable file in case this OS doesn't like to edit its own
+# text space.
+
+set GDB_FULLPATH [find_gdb $GDB]
+
+# Remove any old copy lying around.
+remote_file host delete x$tool
+
+gdb_start
+set file [remote_download host $GDB_FULLPATH x$tool]
+set result [test_with_self $file];
+gdb_exit;
+catch "remote_file host delete $file";
+
+if {$result <0} then {
+    warning "Couldn't test self"
+    return -1
+}
diff --git a/gdb/testsuite/gdb.base/a2-run.exp b/gdb/testsuite/gdb.base/a2-run.exp
new file mode 100644
index 0000000..87a0edf
--- /dev/null
+++ b/gdb/testsuite/gdb.base/a2-run.exp
@@ -0,0 +1,253 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+# These tests don't work for targets can't take arguments...
+
+if [target_info exists noargs] then {
+    verbose "Skipping a2-run.exp because of noargs."
+    return
+}
+
+if [target_info exists gdb,noinferiorio] {
+    verbose "Skipping a2-run.exp because of noinferiorio."
+    return
+}
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "run"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Run with no arguments.
+# On VxWorks this justs make sure the program was run.
+gdb_run_cmd
+
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 "Program exited normally" {
+	    unresolved "run \"$testfile\" with no args"
+	}
+	 -re "usage:  factorial <number>" {
+	    pass "run \"$testfile\" with no args"
+	}
+	timeout	{
+	    fail "(timeout) run \"$testfile\" with no args"
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect -re "$gdb_prompt $" {}
+} else {
+    gdb_expect {
+	-re ".*usage:  factorial <number>.*Program exited with code 01.*$gdb_prompt $" {
+	    pass "run \"$testfile\" with no args"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run \"$testfile\" with no args"
+	    verbose "expect_out is $expect_out(buffer)" 2
+	}
+	timeout	{
+	    fail "(timeout) run \"$testfile\" no args"
+	}
+    }
+}
+# Now run with some arguments
+if [istarget "*-*-vxworks*"] then {
+    send_gdb "run vxmain \"5\"\n"
+    gdb_expect -re "run vxmain \"5\"\r\n" {}
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 "Program exited normally" {
+	    unresolved "run \"$testfile\" with arg"
+	}
+	 "120" {
+	    pass "run \"$testfile\" with arg"
+	}
+	timeout {
+	    fail "(timeout) run \"$testfile\" with arg"
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect -re "$gdb_prompt $" {}
+} else {
+	setup_xfail "mips-idt-*" "arm-*-coff"
+	gdb_run_cmd 5
+	gdb_expect {
+	    -re ".*120.*$gdb_prompt $"\
+				{ pass "run \"$testfile\" with arg" }
+	    -re ".*$gdb_prompt $"	{ fail "run \"$testfile\" with arg" }
+	    timeout		{ fail "(timeout) run \"$testfile\" with arg" }
+	}
+}
+
+# Run again with same arguments.
+setup_xfail "mips-idt-*"
+gdb_run_cmd
+
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 "Program exited normally" {
+	    unresolved "run \"$testfile\" again with same args"
+	}
+	 "120" { pass "run \"$testfile\" again with same args" }
+	timeout { fail "(timeout) run \"$testfile\" again with same args" }
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect -re "$gdb_prompt $" {}
+} else {
+    setup_xfail "arm-*-coff"
+    gdb_expect {
+	    -re ".*120.*$gdb_prompt $"\
+				{ pass "run \"$testfile\" again with same args" }
+	    -re ".*$gdb_prompt $"	{ fail "run \"$testfile\" again with same args" }
+	    timeout		{ fail "(timeout) run \"$testfile\" again with same args" }
+	}
+}
+
+# Use "set args" command to specify no arguments as default and run again.
+if [istarget "*-*-vxworks*"] then {
+    send_gdb "set args main\n"
+} else {
+    send_gdb "set args\n"
+}
+gdb_expect -re "$gdb_prompt $"
+
+gdb_run_cmd
+
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 "Program exited normally" {
+	    unresolved "run after setting args to nil"
+	}
+	 "usage:  factorial <number>" {
+	    pass "run after setting args to nil"
+	}
+	timeout {
+	    fail "(timeout) run after setting args to nil"
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect -re "$gdb_prompt $" {}
+} else {
+    gdb_expect {
+	-re ".*usage:  factorial <number>.*$gdb_prompt $" {
+	    pass "run after setting args to nil"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run after setting args to nil"
+	}
+	timeout {
+	    fail "(timeout) run after setting args to nil"
+	}
+    }
+}
+
+# Use "set args" command to specify an argument and run again.
+setup_xfail "mips-idt-*"
+if [istarget "*-*-vxworks*"] then {
+   send_gdb "set args vxmain \"6\"\n"
+} else {
+	send_gdb "set args 6\n"
+}
+gdb_expect -re "$gdb_prompt $"
+gdb_run_cmd
+
+if [istarget "*-*-vxworks*"] then {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect {
+	 "Program exited normally" {
+	    unresolved "run \"$testfile\" again after setting args"
+	}
+	 "720" {
+	    pass "run \"$testfile\" again after setting args"
+	}
+	timeout {
+	    fail "(timeout) run \"$testfile\" again after setting args"
+	}
+    }
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    gdb_expect -re "$gdb_prompt $" {}
+} else {
+    setup_xfail "arm-*-coff"
+    gdb_expect {
+	    -re ".*720.*$gdb_prompt $" {
+		pass "run \"$testfile\" again after setting args"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "run \"$testfile\" again after setting args"
+	    }
+	    timeout {
+		fail "(timeout) run \"$testfile\" again after setting args"
+	    }
+	}
+}
+
+# GOAL: Test that shell is being used with "run".  For remote debugging
+# targets, there is no guarantee that a "shell" (whatever that is) is used.
+if [isnative] then {
+    send_gdb "run `echo 8`\n"
+    gdb_expect {
+	-re "Starting program.*40320.*$gdb_prompt $" {
+	    pass "run \"$testfile\" with shell"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run \"$testfile\" with shell"
+	}
+	timeout	{
+	    fail "(timeout) run \"$testfile\" with shell"
+	}
+    }
+}
+
+# Reset the default arguments for VxWorks
+if [istarget "*-*-vxworks*"] then {
+    send_gdb "set args main\n"
+    gdb_expect -re ".*$gdb_prompt $" {}
+}
diff --git a/gdb/testsuite/gdb.base/all-bin.exp b/gdb/testsuite/gdb.base/all-bin.exp
new file mode 100644
index 0000000..4d6662b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/all-bin.exp
@@ -0,0 +1,467 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for arithmetic, logical and relational operators
+# with mixed types
+# 
+
+
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "all-types"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+gdb_test "next" "return 0;" "continuing after dummy()"
+
+send_gdb "print v_int+v_char\n"
+gdb_expect {
+    -re ".*71.*$gdb_prompt $" {
+        pass "print value of v_int+v_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_char" }
+    timeout           { fail "(timeout) print value of v_int+v_char" }    
+  }
+
+send_gdb "print v_int+v_short\n"
+gdb_expect {
+    -re ".*9.*$gdb_prompt $" {
+        pass "print value of v_int+v_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_short" }
+    timeout           { fail "(timeout) print value of v_int+v_short" }    
+  }
+
+
+send_gdb "print v_int+v_signed_char\n"
+gdb_expect {
+    -re ".*72.*$gdb_prompt $" {
+        pass "print value of v_int+v_signed_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_signed_char" }
+    timeout           { fail "(timeout) print value of v_int+v_signed_char" }    
+  }
+
+
+send_gdb "print v_int+v_unsigned_char\n"
+gdb_expect {
+    -re ".*73.*$gdb_prompt $" {
+        pass "print value of v_int+v_unsigned_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_unsigned_char" }
+    timeout           { fail "(timeout) print value of v_int+v_unsigned_char" }    
+  }
+
+
+send_gdb "print v_int+v_signed_short\n"
+gdb_expect {
+    -re ".*10.*$gdb_prompt $" {
+        pass "print value of v_int+v_signed_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_signed_short" }
+    timeout           { fail "(timeout) print value of v_int+v_signed_short" }    
+  }
+
+
+send_gdb "print v_int+v_unsigned_short\n"
+gdb_expect {
+    -re ".*11.*$gdb_prompt $" {
+        pass "print value of v_int+v_unsigned_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_unsigned_short" }
+    timeout           { fail "(timeout) print value of v_int+v_unsigned_short" }    
+  }
+
+
+send_gdb "print v_int+v_signed_int\n"
+gdb_expect {
+    -re ".*13.*$gdb_prompt $" {
+        pass "print value of v_int+v_signed_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_signed_int" }
+    timeout           { fail "(timeout) print value of v_int+v_signed_int" }    
+  }
+
+
+send_gdb "print v_int+v_unsigned_int\n"
+gdb_expect {
+    -re ".*14.*$gdb_prompt $" {
+        pass "print value of v_int+v_unsigned_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_unsigned_int" }
+    timeout           { fail "(timeout) print value of v_int+v_unsigned_int" }    
+  }
+
+
+send_gdb "print v_int+v_long\n"
+gdb_expect {
+    -re ".*15.*$gdb_prompt $" {
+        pass "print value of v_int+v_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_long" }
+    timeout           { fail "(timeout) print value of v_int+v_long" }    
+  }
+
+
+send_gdb "print v_int+v_signed_long\n"
+gdb_expect {
+    -re ".*16.*$gdb_prompt $" {
+        pass "print value of v_int+v_signed_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_signed_long" }
+    timeout           { fail "(timeout) print value of v_int+v_signed_long" }    
+  }
+
+
+send_gdb "print v_int+v_unsigned_long\n"
+gdb_expect {
+    -re ".*17.*$gdb_prompt $" {
+        pass "print value of v_int+v_unsigned_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_unsigned_long" }
+    timeout           { fail "(timeout) print value of v_int+v_unsigned_long" }    
+  }
+
+
+send_gdb "print v_int+v_float\n"
+gdb_expect {
+    -re ".*106.34343.*$gdb_prompt $" {
+        pass "print value of v_int+v_float"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_float" }
+    timeout           { fail "(timeout) print value of v_int+v_float" }    
+  }
+
+
+send_gdb "print v_int+v_double\n"
+gdb_expect {
+    -re ".*206.56565.*$gdb_prompt $" {
+        pass "print value of v_int+v_double"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int+v_double" }
+    timeout           { fail "(timeout) print value of v_int+" }    
+  }
+
+
+#
+# test the relational operators with mixed types
+#
+
+send_gdb "print v_int <= v_char\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_char" }
+    timeout           { fail "(timeout) print value of v_int<=v_char" }    
+  }
+
+send_gdb "print v_int <= v_short\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int<=v_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_short" }
+    timeout           { fail "(timeout) print value of v_int<=v_short" }    
+  }
+
+
+send_gdb "print v_int <= v_signed_char\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_signed_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_signed_char" }
+    timeout           { fail "(timeout) print value of v_int<=v_signed_char" }    
+  }
+
+
+send_gdb "print v_int <= v_unsigned_char\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_unsigned_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_unsigned_char" }
+    timeout           { fail "(timeout) print value of v_int<=v_unsigned_char" }    
+  }
+
+
+send_gdb "print v_int <= v_signed_short\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int<=v_signed_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_signed_short" }
+    timeout           { fail "(timeout) print value of v_int<=v_signed_short" }    
+  }
+
+
+send_gdb "print v_int <= v_unsigned_short\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int<=v_unsigned_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_unsigned_short" }
+    timeout           { fail "(timeout) print value of v_int<=v_unsigned_short" }    
+  }
+
+
+send_gdb "print v_int <= v_signed_int\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_signed_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_signed_int" }
+    timeout           { fail "(timeout) print value of v_int<=v_signed_int" }    
+  }
+
+
+send_gdb "print v_int <= v_unsigned_int\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_unsigned_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_unsigned_int" }
+    timeout           { fail "(timeout) print value of v_int<=v_unsigned_int" }    
+  }
+
+
+send_gdb "print v_int <= v_long\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_long" }
+    timeout           { fail "(timeout) print value of v_int<=v_long" }    
+  }
+
+
+send_gdb "print v_int <= v_signed_long\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_signed_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_signed_long" }
+    timeout           { fail "(timeout) print value of v_int<=v_signed_long" }    
+  }
+
+
+send_gdb "print v_int <= v_unsigned_long\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_unsigned_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_unsigned_long" }
+    timeout           { fail "(timeout) print value of v_int<=v_unsigned_long" }    
+  }
+
+
+send_gdb "print v_int <= v_float\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_float"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_float" }
+    timeout           { fail "(timeout) print value of v_int<=v_float" }    
+  }
+
+
+send_gdb "print v_int <= v_double\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int<=v_double"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int<=v_double" }
+    timeout           { fail "(timeout) print value of v_int<=v_double" }    
+  }
+
+
+
+#
+# test the logical operators with mixed types
+#
+
+gdb_test "set variable v_char=0" "" "set v_char=0"
+gdb_test "set variable v_double=0.0" "" "set v_double=0"
+gdb_test "set variable v_unsigned_long=0" "" "set v_unsigned_long=0"
+
+send_gdb "print v_int && v_char\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int&&v_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_char" }
+    timeout           { fail "(timeout) print value of v_int&&v_char" }    
+  }
+
+send_gdb "print v_int && v_short\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_short" }
+    timeout           { fail "(timeout) print value of v_int&&v_short" }    
+  }
+
+
+send_gdb "print v_int && v_signed_char\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_signed_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_signed_char" }
+    timeout           { fail "(timeout) print value of v_int&&v_signed_char" }    
+  }
+
+
+send_gdb "print v_int && v_unsigned_char\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_unsigned_char"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_unsigned_char" }
+    timeout           { fail "(timeout) print value of v_int&&v_unsigned_char" }    
+  }
+
+
+send_gdb "print v_int && v_signed_short\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_signed_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_signed_short" }
+    timeout           { fail "(timeout) print value of v_int&&v_signed_short" }    
+  }
+
+
+send_gdb "print v_int && v_unsigned_short\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_unsigned_short"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_unsigned_short" }
+    timeout           { fail "(timeout) print value of v_int&&v_unsigned_short" }    
+  }
+
+
+send_gdb "print v_int && v_signed_int\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_signed_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_signed_int" }
+    timeout           { fail "(timeout) print value of v_int&&v_signed_int" }    
+  }
+
+
+send_gdb "print v_int && v_unsigned_int\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_unsigned_int"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_unsigned_int" }
+    timeout           { fail "(timeout) print value of v_int&&v_unsigned_int" }    
+  }
+
+
+send_gdb "print v_int && v_long\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_long" }
+    timeout           { fail "(timeout) print value of v_int&&v_long" }    
+  }
+
+
+send_gdb "print v_int && v_signed_long\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_signed_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_signed_long" }
+    timeout           { fail "(timeout) print value of v_int&&v_signed_long" }    
+  }
+
+
+send_gdb "print v_int && v_unsigned_long\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int&&v_unsigned_long"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_unsigned_long" }
+    timeout           { fail "(timeout) print value of v_int&&v_unsigned_long" }    
+  }
+
+
+send_gdb "print v_int && v_float\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of v_int&&v_float"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_float" }
+    timeout           { fail "(timeout) print value of v_int&&v_float" }    
+  }
+
+
+send_gdb "print v_int && v_double\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of v_int&&v_double"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of v_int&&v_double" }
+    timeout           { fail "(timeout) print value of v_int&&v_double" }    
+  }
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/all-types.c b/gdb/testsuite/gdb.base/all-types.c
new file mode 100644
index 0000000..2f3a31f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/all-types.c
@@ -0,0 +1,62 @@
+/*
+ *	the basic C types.
+ */
+
+#if !defined (__STDC__) && !defined (_AIX)
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+int main ()
+{
+    extern void dummy();
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    dummy();
+    return 0;
+    
+}
+
+void dummy()
+{
+  /* Some linkers (e.g. on AIX) remove unreferenced variables,
+     so make sure to reference them. */
+  v_char = 'A';
+  v_signed_char = 'B';
+  v_unsigned_char = 'C';
+
+  v_short = 3;
+  v_signed_short = 4;
+  v_unsigned_short = 5;    
+
+  v_int = 6;
+  v_signed_int = 7;
+  v_unsigned_int = 8;    
+
+  v_long = 9;
+  v_signed_long = 10;
+  v_unsigned_long = 11;    
+  
+  v_float = 100.343434;
+  v_double = 200.565656;
+}
diff --git a/gdb/testsuite/gdb.base/arithmet.exp b/gdb/testsuite/gdb.base/arithmet.exp
new file mode 100644
index 0000000..69b9f74
--- /dev/null
+++ b/gdb/testsuite/gdb.base/arithmet.exp
@@ -0,0 +1,375 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for correctness of arithmetic operators, associativity and precedence
+# with integer type variables
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#
+# test expressions with "int" types
+#
+
+gdb_test "set variable x=14" "" "set variable x=14"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable z=2" "" "set variable z=2"
+gdb_test "set variable w=3" "" "set variable w=3"
+
+send_gdb "print x\n"
+gdb_expect {
+    -re ".*14.*$gdb_prompt $" {
+        pass "print value of x"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x" }
+    timeout           { fail "(timeout) print value of x" }    
+  }
+
+
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of y" }
+    timeout           { fail "(timeout) print value of y" }    
+  }
+
+send_gdb "print z\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of z" }
+    timeout           { fail "(timeout) print value of z" }    
+  }
+
+send_gdb "print w\n"
+gdb_expect {
+    -re ".*3.*$gdb_prompt $" {
+        pass "print value of w"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of w" }
+    timeout           { fail "(timeout) print value of w" }    
+  }
+
+
+
+send_gdb "print x+y\n"
+gdb_expect {
+    -re ".*16.*$gdb_prompt $" {
+        pass "print value of x+y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y" }
+    timeout           { fail "(timeout) print value of x+y" }    
+  }
+
+send_gdb "print x-y\n"
+gdb_expect {
+    -re ".*12.*$gdb_prompt $" {
+        pass "print value of x-y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-y" }
+    timeout           { fail "(timeout) print value of x-y" }    
+  }
+
+send_gdb "print x*y\n"
+gdb_expect {
+    -re ".*28.*$gdb_prompt $" {
+        pass "print value of x*y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x*y" }
+    timeout           { fail "(timeout) print value of x*y" }    
+  }
+
+send_gdb "print x/y\n"
+gdb_expect {
+    -re ".*7.*$gdb_prompt $" {
+        pass "print value of x/y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x/y" }
+    timeout           { fail "(timeout) print value of x/y" }    
+  }
+
+send_gdb "print x%y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x%y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x%y" }
+    timeout           { fail "(timeout) print value of x%y" }    
+  }
+
+
+
+# Test associativity of +, -, *, % ,/
+
+
+send_gdb "print x+y+z\n"
+gdb_expect {
+    -re ".*18.*$gdb_prompt $" {
+        pass "print value of x+y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y" }
+    timeout           { fail "(timeout) print value of x+y" }    
+  }
+
+send_gdb "print x-y-z\n"
+gdb_expect {
+    -re ".*10.*$gdb_prompt $" {
+        pass "print value of x-y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-y" }
+    timeout           { fail "(timeout) print value of x-y" }    
+  }
+
+send_gdb "print x*y*z\n"
+gdb_expect {
+    -re ".*56.*$gdb_prompt $" {
+        pass "print value of x*y"
+      }
+    -re 8".*$gdb_prompt $" { fail "print value of x*y" }
+    timeout           { fail "(timeout) print value of x*y" }    
+  }
+
+send_gdb "print x/y/z\n"
+gdb_expect {
+    -re ".*3.*$gdb_prompt $" {
+        pass "print value of x/y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x/y" }
+    timeout           { fail "(timeout) print value of x/y" }    
+  }
+
+send_gdb "print x%y%z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x%y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x%y" }
+    timeout           { fail "(timeout) print value of x%y" }    
+  }
+
+
+# test precedence rules on pairs of arithmetic operators
+
+gdb_test "set variable x=10" "" "set variable x"
+gdb_test "set variable y=4" ""  "set variable y"
+gdb_test "set variable z=2" ""  "set variable z"
+
+
+
+# x  y z
+# 10 4 2
+send_gdb "print x+y-z\n"
+gdb_expect {
+    -re ".*12.*$gdb_prompt $" {
+        pass "print value of x+y-z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y-z" }
+    timeout           { fail "(timeout) print value of x+y-z" }    
+  }
+
+# 10 4 2
+send_gdb "print x+y*z\n"
+gdb_expect {
+    -re ".*18.*$gdb_prompt $" {
+        pass "print value of x+y*z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y*z" }
+    timeout           { fail "(timeout) print value of x+y*z" }    
+  }
+
+
+gdb_test "set variable z=3" "" "set variable z"
+
+
+# 10 4 3
+send_gdb "print x+y%z\n"
+gdb_expect {
+    -re ".*11.*$gdb_prompt $" {
+        pass "print value of x+y%z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y%z" }
+    timeout           { fail "(timeout) print value of x+y%z" }    
+  }
+
+
+# 10 4 3
+send_gdb "print x+y/z\n"
+gdb_expect {
+    -re ".*11.*$gdb_prompt $" {
+        pass "print value of x+y/z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x+y/z" }
+    timeout           { fail "(timeout) print value of x+y/z" }    
+  }
+
+gdb_test "set variable z=2" "" " set variable z"
+
+
+# 10 4 2
+send_gdb "print x-y*z\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of x-y*z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-y*z" }
+    timeout           { fail "(timeout) print value of x-y*z" }    
+  }
+
+# 10 4 2
+send_gdb "print x-y%z\n"
+gdb_expect {
+    -re ".*10.*$gdb_prompt $" {
+        pass "print value of x-y%z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-y%z" }
+    timeout           { fail "(timeout) print value of x-y%z" }    
+  }
+
+
+# 10 4 2
+send_gdb "print x-y/z\n"
+gdb_expect {
+    -re ".*8.*$gdb_prompt $" {
+        pass "print value of x-y/z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-y/z" }
+    timeout           { fail "(timeout) print value of x-y/z" }    
+  }
+
+# 10 4 2
+send_gdb "print x*y/z\n"
+gdb_expect {
+    -re ".*20.*$gdb_prompt $" {
+        pass "print value of x*y/z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x*y/z" }
+    timeout           { fail "(timeout) print value of x*y/z" }    
+  }
+
+gdb_test "set variable z=3" "" "set z to 3"
+
+# 10 4 3
+send_gdb "print x*y%z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x*y%z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x*y%z" }
+    timeout           { fail "(timeout) print value of x*y%z" }    
+  }
+
+# 10 4 3
+send_gdb "print x/y%z\n"
+gdb_expect {
+    -re ".*2\r\n$gdb_prompt $" {
+        pass "print value of x/y%z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x/y%z" }
+    timeout           { fail "(timeout) print value of x/y%z" }    
+  }
+
+        
+
+# test use of parenthesis to enforce different order of evaluation
+
+# 10 4 3 
+send_gdb "print x-(y+z)\n"
+gdb_expect {
+    -re ".*3\r\n$gdb_prompt $" {
+        pass "print value of x-(y+z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-(y+z)" }
+    timeout           { fail "(timeout) print value of x-(y+z)" }    
+  }
+
+
+# 10 4 3
+send_gdb "print x/(y*z)\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x/(y*z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x/(y*z)" }
+    timeout           { fail "(timeout) print value of x/(y*z)" }    
+  }
+
+# 10 4 3
+send_gdb "print x-(y/z)\n"
+gdb_expect {
+    -re ".*9\r\n$gdb_prompt $" {
+        pass "print value of x-(y/z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x-(y/z)" }
+    timeout           { fail "(timeout) print value of x-(y/z)" }    
+  }
+
+
+# 10 4 3
+send_gdb "print (x+y)*z\n"
+gdb_expect {
+    -re ".*42\r\n$gdb_prompt $" {
+        pass "print value of (x+y)*z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (x+y)*z" }
+    timeout           { fail "(timeout) print value of (x+y)*z" }    
+  }
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/assign.exp b/gdb/testsuite/gdb.base/assign.exp
new file mode 100644
index 0000000..059862c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/assign.exp
@@ -0,0 +1,446 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for all the assignemnt operators
+# with mixed types and with int type variables
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "all-types"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+gdb_test "next" "return 0;" "continuing after dummy()"
+
+send_gdb "print v_int=57\n"
+gdb_expect {
+    -re ".*57.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*57.*$gdb_prompt $" {
+                pass "v_int=57"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int=57" }
+            timeout           { fail "(timeout) v_int=57" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int=57" }
+    timeout           { fail "(timeout) v_int=57" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+send_gdb "print v_int+=57\n"
+gdb_expect {
+    -re ".*63.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*63.*$gdb_prompt $" {
+                pass "v_int+=57"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=57" }
+            timeout           { fail "(timeout) v_int+=57" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=57" }
+    timeout           { fail "(timeout) v_int+=57" }    
+  }
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+send_gdb "print v_int-=57\n"
+gdb_expect {
+    -re ".*-51.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*-51.*$gdb_prompt $" {
+                pass "v_int-=57"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int-=57" }
+            timeout           { fail "(timeout) v_int-=57" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int-=57" }
+    timeout           { fail "(timeout) v_int-=57" }    
+  }
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+send_gdb "print v_int*=5\n"
+gdb_expect {
+    -re ".*30.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*30.*$gdb_prompt $" {
+                pass "v_int*=5"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int*=5" }
+            timeout           { fail "(timeout) v_int*=5" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int*=5" }
+    timeout           { fail "(timeout) v_int*=5" }    
+  }
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+send_gdb "print v_int/=4\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*1.*$gdb_prompt $" {
+                pass "v_int/=4"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int/=4" }
+            timeout           { fail "(timeout) v_int/=4" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int/=4" }
+    timeout           { fail "(timeout) v_int/=4" }    
+  }
+
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+send_gdb "print v_int%=4\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*2.*$gdb_prompt $" {
+                pass "v_int%=4"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int%=4" }
+            timeout           { fail "(timeout) v_int%=4" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int%=4" }
+    timeout           { fail "(timeout) v_int%=4" }    
+  }
+
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_char\n"
+gdb_expect {
+    -re ".*71.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*71.*$gdb_prompt $" {
+                pass "v_int+=char"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_char" }
+            timeout           { fail "(timeout) v_int+=v_char" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_char" }
+    timeout           { fail "(timeout) v_int+=v_char" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_signed_char\n"
+gdb_expect {
+    -re ".*72.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*72.*$gdb_prompt $" {
+                pass "v_int+=signed_char"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_signed_char" }
+            timeout           { fail "(timeout) v_int+=v_signed_char" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_signed_char" }
+    timeout           { fail "(timeout) v_int+=v_signed_char" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_unsigned_char\n"
+gdb_expect {
+    -re ".*73.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*73.*$gdb_prompt $" {
+                pass "v_int+=unsigned_char"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_char" }
+            timeout           { fail "(timeout) v_int+=v_unsigned_char" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_char" }
+    timeout           { fail "(timeout) v_int+=v_unsigned_char" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_short\n"
+gdb_expect {
+    -re ".*9.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*9.*$gdb_prompt $" {
+                pass "v_int+=short"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_short" }
+            timeout           { fail "(timeout) v_int+=v_short" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_short" }
+    timeout           { fail "(timeout) v_int+=v_short" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_signed_short\n"
+gdb_expect {
+    -re ".*10.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*10.*$gdb_prompt $" {
+                pass "v_int+=signed_short"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_signed_short" }
+            timeout           { fail "(timeout) v_int+=v_signed_short" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_signed_short" }
+    timeout           { fail "(timeout) v_int+=v_signed_short" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_unsigned_short\n"
+gdb_expect {
+    -re ".*11.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*11.*$gdb_prompt $" {
+                pass "v_int=+unsigned_short"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_short" }
+            timeout           { fail "(timeout) v_int+=v_unsigned_short" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_short" }
+    timeout           { fail "(timeout) v_int+=v_unsigned_short" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_signed_int\n"
+gdb_expect {
+    -re ".*13.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*13.*$gdb_prompt $" {
+                pass "v_int+=signed_int"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_signed_int" }
+            timeout           { fail "(timeout) v_int+=v_signed_int" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_signed_int" }
+    timeout           { fail "(timeout) v_int+=v_signed_int" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_unsigned_int\n"
+gdb_expect {
+    -re ".*14.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*14.*$gdb_prompt $" {
+                pass "v_int+=unsigned_int"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_int" }
+            timeout           { fail "(timeout) v_int+=v_unsigned_int" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_int" }
+    timeout           { fail "(timeout) v_int+=v_unsigned_int" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_long\n"
+gdb_expect {
+    -re ".*15.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*15.*$gdb_prompt $" {
+                pass "v_int+=long"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_long" }
+            timeout           { fail "(timeout) v_int+=v_long" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_long" }
+    timeout           { fail "(timeout) v_int+=v_long" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+
+send_gdb "print v_int+=v_signed_long\n"
+gdb_expect {
+    -re ".*16.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*16.*$gdb_prompt $" {
+                pass "v_int+=signed_long"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_signed_long" }
+            timeout           { fail "(timeout) v_int+=v_signed_long" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_signed_long" }
+    timeout           { fail "(timeout) v_int+=v_signed_long" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+send_gdb "print v_int+=v_unsigned_long\n"
+gdb_expect {
+    -re ".*17.*$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*17.*$gdb_prompt $" {
+                pass "v_int+=unsigned_long"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_long" }
+            timeout           { fail "(timeout) v_int+=v_unsigned_long" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_unsigned_long" }
+    timeout           { fail "(timeout) v_int+=v_unsigned_long" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+send_gdb "print v_int+=v_float\n"
+gdb_expect {
+    -re ".*106\r\n$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*106\r\n$gdb_prompt $" {
+                pass "v_int+=v_float"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_float" }
+            timeout           { fail "(timeout) v_int+=v_float" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_float" }
+    timeout           { fail "(timeout) v_int+=v_float" }    
+  }
+
+
+gdb_test "set variable v_int = 6" "" "set v_int to 6"
+
+
+send_gdb "print v_int+=v_double\n"
+gdb_expect {
+    -re ".*206\r\n$gdb_prompt $" {
+        send_gdb "print v_int\n"
+        gdb_expect {
+            -re ".*206\r\n$gdb_prompt $" {
+                pass "v_int+=double"
+              }
+            -re ".*$gdb_prompt $" { fail "v_int+=v_double" }
+            timeout           { fail "(timeout) v_int+=v_double" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "v_int+=v_signed_long" }
+    timeout           { fail "(timeout) v_int+=v_double" }    
+  }
+
+
diff --git a/gdb/testsuite/gdb.base/bar.c b/gdb/testsuite/gdb.base/bar.c
new file mode 100644
index 0000000..8a4da980
--- /dev/null
+++ b/gdb/testsuite/gdb.base/bar.c
@@ -0,0 +1,9 @@
+static int barx __attribute__ ((section (".data01"))) = 'b' + 'a' + 'r';
+
+int bar (int x)
+{
+  if (x)
+    return barx;
+  else
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.base/baz.c b/gdb/testsuite/gdb.base/baz.c
new file mode 100644
index 0000000..a13cd16
--- /dev/null
+++ b/gdb/testsuite/gdb.base/baz.c
@@ -0,0 +1,9 @@
+static int bazx __attribute__ ((section (".data02"))) = 'b' + 'a' + 'z';
+
+int baz (int x)
+{
+  if (x)
+    return bazx;
+  else
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.base/bitfields.c b/gdb/testsuite/gdb.base/bitfields.c
new file mode 100644
index 0000000..930b244
--- /dev/null
+++ b/gdb/testsuite/gdb.base/bitfields.c
@@ -0,0 +1,194 @@
+/* Test program to test bit field operations */
+
+/* For non-ANSI compilers, use plain ints for the signed bit fields.  However,
+   whether they actually end up signed or not is implementation defined, so
+   this may cause some tests to fail.  But at least we can still compile
+   the test program and run the tests... */
+
+#ifndef __STDC__
+#define signed  /**/
+#endif
+
+struct fields
+{
+  unsigned char	uc    ;
+  signed int	s1 : 1;
+  unsigned int	u1 : 1;
+  signed int	s2 : 2;
+  unsigned int	u2 : 2;
+  signed int	s3 : 3;
+  unsigned int	u3 : 3;
+  signed int	s9 : 9;
+  unsigned int  u9 : 9;
+  signed char	sc    ;
+} flags;
+
+void break1 ()
+{
+}
+
+void break2 ()
+{
+}
+
+void break3 ()
+{
+}
+
+void break4 ()
+{
+}
+
+void break5 ()
+{
+}
+
+void break6 ()
+{
+}
+
+void break7 ()
+{
+}
+
+void break8 ()
+{
+}
+
+void break9 ()
+{
+}
+
+void break10 ()
+{
+}
+
+/* This is used by bitfields.exp to determine if the target understands
+   signed bitfields.  */
+int i;
+
+int main ()
+{
+  /* For each member, set that member to 1, allow gdb to verify that the
+     member (and only that member) is 1, and then reset it back to 0. */
+
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  flags.uc = 1;
+  break1 ();
+  flags.uc = 0;
+
+  flags.s1 = 1;
+  break1 ();
+  flags.s1 = 0;
+
+  flags.u1 = 1;
+  break1 ();
+  flags.u1 = 0;
+
+  flags.s2  = 1;
+  break1 ();
+  flags.s2 = 0;
+
+  flags.u2 = 1;
+  break1 ();
+  flags.u2 = 0;
+
+  flags.s3  = 1;
+  break1 ();
+  flags.s3 = 0;
+
+  flags.u3 = 1;
+  break1 ();
+  flags.u3 = 0;
+
+  flags.s9 = 1;
+  break1 ();
+  flags.s9 = 0;
+
+  flags.u9 = 1;
+  break1 ();
+  flags.u9 = 0;
+
+  flags.sc = 1;
+  break1 ();
+  flags.sc = 0;
+
+  /* Fill alternating fields with all 1's and verify that none of the bits
+     "bleed over" to the other fields. */
+
+  flags.uc = 0xFF;
+  flags.u1 = 0x1;
+  flags.u2 = 0x3;
+  flags.u3 = 0x7;
+  flags.u9 = 0x1FF;
+  break2 ();
+  flags.uc = 0;
+  flags.u1 = 0;
+  flags.u2 = 0;
+  flags.u3 = 0;
+  flags.u9 = 0;
+
+  flags.s1 = 0x1;
+  flags.s2 = 0x3;
+  flags.s3 = 0x7;
+  flags.s9 = 0x1FF;
+  flags.sc = 0xFF;
+  break2 ();
+  flags.s1 = 0;
+  flags.s2 = 0;
+  flags.s3 = 0;
+  flags.s9 = 0;
+  flags.sc = 0;
+
+  /* Fill the unsigned fields with the maximum positive value and verify
+     that the values are printed correctly. */
+
+  /* Maximum positive values */
+  flags.u1 = 0x1;
+  flags.u2 = 0x3;
+  flags.u3 = 0x7;
+  flags.u9 = 0x1FF;
+  break3 ();
+  flags.u1 = 0;
+  flags.u2 = 0;
+  flags.u3 = 0;
+  flags.u9 = 0;
+
+  /* Fill the signed fields with the maximum positive value, then the maximally
+     negative value, then -1, and verify in each case that the values are
+     printed correctly. */
+
+  /* Maximum positive values */
+  flags.s1 = 0x0;
+  flags.s2 = 0x1;
+  flags.s3 = 0x3;
+  flags.s9 = 0xFF;
+  break4 ();
+
+  /* Maximally negative values */
+  flags.s1 = 0x1;
+  flags.s2 = 0x2;
+  flags.s3 = 0x4;
+  flags.s9 = 0x100;
+  /* Extract bitfield value so that bitfield.exp can check if the target
+     understands signed bitfields.  */
+  i = flags.s9;
+  break4 ();
+
+  /* -1 */
+  flags.s1 = 0x1;
+  flags.s2 = 0x3;
+  flags.s3 = 0x7;
+  flags.s9 = 0x1FF;
+  break4 ();
+
+  flags.s1 = 0;
+  flags.s2 = 0;
+  flags.s3 = 0;
+  flags.s9 = 0;
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/bitfields.exp b/gdb/testsuite/gdb.base/bitfields.exp
new file mode 100644
index 0000000..764e80c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/bitfields.exp
@@ -0,0 +1,268 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "bitfields"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Test bitfield locating and uniqueness.
+# For each member, set that member to 1 and verify that the member (and only
+# that member) is 1, then reset it back to 0.
+#
+
+proc bitfield_uniqueness {} {
+    global decimal
+    global hex
+    global gdb_prompt
+    global srcfile
+
+    if { ! [runto break1] } {
+	gdb_suppress_tests;
+    }
+	
+    if [gdb_test "print flags" ".*uc = 1 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 0.*"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #1"] {
+	gdb_suppress_tests;
+    }
+    # Note that we check for s1 as either 1 or -1, so that failure to
+    # treat it correctly as a signed 1bit field (values 0 or -1) while
+    # printing its value does not cause a spurious failure.  We do the
+    # signedness preservation test later.
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = (1|-1), u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (s1)"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #2"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 1, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (u1)"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #3"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 1, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (s2)"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #4"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 1, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (u2)"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #5"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 1, u3 = 0, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (s3)"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #6"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 1, s9 = 0, u9 = 0, sc = 0.*" "bitfield uniqueness (u3)"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #7"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 1, u9 = 0, sc = 0.*" "bitfield uniqueness (s9)"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #8"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 1, sc = 0.*" "bitfield uniqueness (u9)"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "cont" "Break.*break1 \\(\\) at .*$srcfile:$decimal.*" "continuing to break1 #9"] {
+	gdb_suppress_tests
+    }
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 0, s2 = 0, u2 = 0, s3 = 0, u3 = 0, s9 = 0, u9 = 0, sc = 1.*" "bitfield uniqueness (sc)"] {
+	gdb_suppress_tests
+    }
+    # Hmmmm?
+    gdb_stop_suppressing_tests;
+}
+
+
+#
+# Test bitfield containment.
+# Fill alternating fields with all 1's and verify that none of the bits
+# "bleed over" to the other fields.
+#
+
+proc bitfield_containment {} {
+    global decimal
+    global hex
+    global gdb_prompt
+    global srcfile
+
+    delete_breakpoints
+
+    if { ![runto break2] } {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "print/x flags" "= {uc = 0xff, s1 = 0x0, u1 = 0x1, s2 = 0x0, u2 = 0x3, s3 = 0x0, u3 = 0x7, s9 = 0x0, u9 = 0x1ff, sc = 0x0}" "bitfield containment #1"] {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "cont" "Break.*break2 \\(\\) at .*$srcfile:$decimal.*" "continuing to break2"] {
+	gdb_suppress_tests
+    }
+
+    # If program is compiled with Sun CC, then these print out as their
+    # actual sizes; if compiled with gcc, they print out as 0xffffffff
+    # (which strikes me as bogus, but accept it at least for now).
+    if [gdb_test "print/x flags" "= {uc = 0x0, s1 = 0x(1|f*), u1 = 0x0, s2 = 0x(3|f*), u2 = 0x0, s3 = 0x(7|f*), u3 = 0x0, s9 = 0x(1ff|f*), u9 = 0x0, sc = 0xff}" "bitfield containment #2"] {
+	gdb_suppress_tests
+    }
+    gdb_stop_suppressing_tests;
+}
+
+# Test unsigned bitfields for unsignedness and range.
+# Fill the unsigned fields with the maximum positive value and verify that
+# the values are printed correctly.
+
+proc bitfield_unsignedness {} {
+    global decimal
+    global hex
+    global gdb_prompt
+    global srcfile
+
+    delete_breakpoints
+
+    if { ![runto break3] } {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = 0, u1 = 1, s2 = 0, u2 = 3, s3 = 0, u3 = 7, s9 = 0, u9 = 511, sc = 0.*" "unsigned bitfield ranges"] {
+	gdb_suppress_tests
+    }
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Test signed bitfields for signedness and range.
+# Fill the signed fields with the maximum positive value, then the maximally
+# negative value, then -1, and verify in each case that the values are
+# printed correctly.
+#
+
+proc bitfield_signedness {} {
+    global decimal
+    global hex
+    global gdb_prompt
+    global srcfile
+
+    delete_breakpoints
+
+    if { ! [runto break4] } {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "print flags" "= {uc = 0 .*, s1 = 0, u1 = 0, s2 = 1, u2 = 0, s3 = 3, u3 = 0, s9 = 255, u9 = 0, sc = 0 .*}" "signed bitfields, max positive values"] {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "cont" "Break.*break4 \\(\\) at .*$srcfile:$decimal.*" "continuing to break4 #1"] {
+	gdb_suppress_tests
+    }
+
+    # Determine if the target has signed bitfields so we can xfail the
+    # the signed bitfield tests if it doesn't.
+    send_gdb "print i\n"
+    gdb_expect {
+	-re ".* = -256.*$gdb_prompt $" {
+	    pass "determining signed-ness of bitfields"
+	}
+	-re ".* = 256.*$gdb_prompt $" {
+	    pass "determining signed-ness of bitfields"
+	    setup_xfail "*-*-*"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "determining signed-ness of bitfields"
+	    gdb_suppress_tests
+	}
+	default { 
+	    fail "determining signed-ness of bitfields" ;
+	    gdb_suppress_tests;
+	}
+    }
+
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = -1, u1 = 0, s2 = -2, u2 = 0, s3 = -4, u3 = 0, s9 = -256, u9 = 0, sc = 0.*" "signed bitfields, max negative values"] {
+        gdb_suppress_tests
+    }
+
+    if [gdb_test "cont" "Break.*break4 \\(\\) at .*$srcfile:$decimal.*" "continuing to break4 #2"] {
+	gdb_suppress_tests
+    }
+
+    if [gdb_test "print flags" ".*uc = 0 .*, s1 = -1, u1 = 0, s2 = -1, u2 = 0, s3 = -1, u3 = 0, s9 = -1, u9 = 0, sc = 0.*" "signed bitfields with -1"] {
+	gdb_suppress_tests
+    }
+    # Hmmmm???
+    gdb_stop_suppressing_tests;
+}
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+
+bitfield_uniqueness
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+bitfield_containment
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+bitfield_unsignedness
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+bitfield_signedness
diff --git a/gdb/testsuite/gdb.base/bitops.exp b/gdb/testsuite/gdb.base/bitops.exp
new file mode 100644
index 0000000..f1c578e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/bitops.exp
@@ -0,0 +1,365 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests expressions with bitwise operators, and some
+# logical operators
+# Does not use a target program
+# 
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+
+send_gdb "print !1\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !1"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !1" }
+    timeout           { fail "(timeout) print value of !1" }
+  }
+
+
+send_gdb "print !0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of !0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !0" }
+    timeout           { fail "(timeout) print value of !0" }
+  }
+
+
+send_gdb "print !100\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !100"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !100" }
+    timeout           { fail "(timeout) print value of !100" }
+  }
+
+
+send_gdb "print !1000\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !1000"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !1000" }
+    timeout           { fail "(timeout) print value of !1000" }
+  }
+
+
+send_gdb "print !10\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !10"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !10" }
+    timeout           { fail "(timeout) print value of !10" }
+  }
+
+
+send_gdb "print !2\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !2 "
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !2" }
+    timeout           { fail "(timeout) print value of !2" }
+  }
+
+
+send_gdb "print 10 | 5\n"
+gdb_expect {
+    -re ".\[0-9\]* = 15.*$gdb_prompt $" {
+        pass "print value of 10 | 5"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 10 | 5" }
+    timeout           { fail "(timeout) print value of 10 | 5" }
+  }
+
+
+send_gdb "print 10 & 5\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 10 & 5"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 10 & 5" }
+    timeout           { fail "(timeout) print value of 10 & 5" }
+  }
+
+
+send_gdb "print 10 ^ 5\n"
+gdb_expect {
+    -re ".\[0-9\]* = 15.*$gdb_prompt $" {
+        pass "print value of 10 ^ 5"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 10 ^ 5" }
+    timeout           { fail "(timeout) print value of 10 ^ 5" }
+  }
+
+
+send_gdb "print -!0\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.*$gdb_prompt $" {
+        pass "print value of -!0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of -!0" }
+    timeout           { fail "(timeout) print value of -!0" }
+  }
+
+
+send_gdb "print ~-!0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of ~-!0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ~-!0" }
+    timeout           { fail "(timeout) print value of ~-!0" }
+  }
+
+
+
+send_gdb "print 3 * 2 / 4.0 * 2.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of 3 * 2 / 4.0 * 2.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3 * 2 / 4.0 * 2.0" }
+    timeout           { fail "(timeout) print value of 3 * 2 / 4.0 * 2.0" }
+  }
+
+
+send_gdb "print 8 << 2 >> 4\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of 8 << 2 >> 4"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 8 << 2 >> 4" }
+    timeout           { fail "(timeout) print value of 8 << 2 >> 4" }
+  }
+
+
+send_gdb "print -1 < 0 > 1\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of -1 < 0 > 1"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of -1 < 0 > 1" }
+    timeout           { fail "(timeout) print value of -1 < 0 > 1" }
+  }
+
+
+send_gdb "print 15 ^ 10 ^ 5 ^ 7\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7.*$gdb_prompt $" {
+        pass "print value of 15 ^ 10 ^ 5 ^ 7"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 15 ^ 10 ^ 5 ^ 7" }
+    timeout           { fail "(timeout) print value of 15 ^ 10 ^ 5 ^ 7" }
+  }
+
+
+send_gdb "print 3.5 < 4.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 3.5 < 4.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3.5 < 4.0" }
+    timeout           { fail "(timeout) print value of 3.5 < 4.0" }
+  }
+
+
+send_gdb "print 3.5 < -4.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 3.5 < -4.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3.5 < -4.0" }
+    timeout           { fail "(timeout) print value of 3.5 < -4.0" }
+  }
+
+
+send_gdb "print 2 > -3\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 2 > -3"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 2 > -3" }
+    timeout           { fail "(timeout) print value of 2 > -3" }
+  }
+
+
+send_gdb "print -3>4\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of -3>4"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of -3>4" }
+    timeout           { fail "(timeout) print value of -3>4" }
+  }
+
+
+send_gdb "print (-3 > 4)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of (-3 > 4)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (-3 > 4)" }
+    timeout           { fail "(timeout) print value of (-3 > 4)" }
+  }
+
+
+send_gdb "print 3>=2.5\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 3>=2.5"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3>=2.5" }
+    timeout           { fail "(timeout) print value of 3>=2.5" }
+  }
+
+
+send_gdb "print 3>=4.5\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 3>=4.5"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3>=4.5" }
+    timeout           { fail "(timeout) print value of 3>=4.5" }
+  }
+
+
+send_gdb "print 3==3.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 3==3.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3==3.0" }
+    timeout           { fail "(timeout) print value of 3==3.0" }
+  }
+
+
+send_gdb "print 3==4.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 3==4.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3==4.0" }
+    timeout           { fail "(timeout) print value of 3==4.0" }
+  }
+
+
+send_gdb "print 3!=3.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 3!=3.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3!=3.0" }
+    timeout           { fail "(timeout) print value of 3!=3.0" }
+  }
+
+
+send_gdb "print 3!=5.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 3!=5.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 3!=5.0" }
+    timeout           { fail "(timeout) print value of 3!=5.0" }
+  }
+
+
+send_gdb "print 0 || 1 && 0 | 0 ^ 0 == 8 > 128 >>1 +2 *2\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 0 || 1 && 0 | 0 ^ 0 == 8 > 128 >>1 +2 *2"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 0 || 1 && 0 | 0 ^ 0 == 8 > 128 >>1 +2 *2" }
+    timeout           { fail "(timeout) print value of 0 || 1 && 0 | 0 ^ 0 == 8 > 128 >>1 +2 *2" }
+  }
+
+
+send_gdb "print 1.0 || 0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 1.0 || 0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 1.0 || 0" }
+    timeout           { fail "(timeout) print value of 1.0 || 0" }
+  }
+
+
+send_gdb "print 0.0 || 1.0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of 0.0 || 1.0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 0.0 || 1.0" }
+    timeout           { fail "(timeout) print value of 0.0 || 1.0" }
+  }
+
+
+send_gdb "print 0.0 || 0\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 0.0 || 0"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 0.0 || 0" }
+    timeout           { fail "(timeout) print value of 0.0 || 0" }
+  }
+
+
+send_gdb "print 0 || 1 && 0 | 0 ^ 0 == 8\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 0 || 1 && 0 | 0 ^ 0 == 8"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 0 || 1 && 0 | 0 ^ 0 == 8" }
+    timeout           { fail "(timeout) print value of 0 || 1 && 0 | 0 ^ 0 == 8" }
+  }
+
+
+send_gdb "print 0 == 8 > 128 >> 1 + 2 * 2\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of 0 == 8 > 128 >> 1 + 2 * 2"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of 0 == 8 > 128 >> 1 + 2 * 2" }
+    timeout           { fail "(timeout) print value of 0 == 8 > 128 >> 1 + 2 * 2" }
+  }
+
diff --git a/gdb/testsuite/gdb.base/branches.c b/gdb/testsuite/gdb.base/branches.c
new file mode 100644
index 0000000..df3b7c0
--- /dev/null
+++ b/gdb/testsuite/gdb.base/branches.c
@@ -0,0 +1,113 @@
+/* Tests for single stepping through various branch conditions */
+
+int noscramble(int a)
+{
+  return a ;
+}
+
+int echo(int a)
+{ return noscramble(a) ; }
+
+int equaltest(int a,int b)
+{ int retval ;
+  if (a == b)
+    retval = noscramble(1) ;
+  else retval = noscramble(0) ;
+  return retval ;
+}
+
+int neqtest(int a , int b)
+{ int retval ;
+  if (a != b)
+    retval = echo(1) ;
+  else retval = echo(2) ;
+  return retval ;
+}
+int zerotest(int a )
+{ int retval ;
+  a = echo(a) ;
+  if (a ==0)
+    retval = echo(1) ;
+  else
+    retval = echo(0) ;
+  retval = echo(retval) ;
+  return retval ;
+}
+
+int zerotest2(int a)
+{
+  return (a==0) ;
+}
+
+int nonzerotest(int a)
+{
+  int retval ;
+  if (a != 0)
+    retval = echo(0) ;
+  else retval = echo(1) ;
+  return retval ;
+}
+
+int whiletest(int a)
+{
+  while (a > 0)
+    {
+      a-- ;
+    }
+  return 0 ;
+}
+int whiletest2(int a)
+{
+  while (a > 0)
+    {
+      a = noscramble(a) ;
+      a-- ;
+    }
+  return a ;
+}
+
+int decr(int x) { return x - 1  ; }
+
+int while3(int a)
+{
+  int b = a ;
+  while (a == b)
+    {
+      a = echo(a) ;
+      b = decr(b) ;
+    }
+  return a ;
+}
+
+void done (int x) { } 
+
+int main()
+{
+  int a,b,c,d ;
+  done(1) ;
+  a = echo(123456) ;
+  b = echo(123456) ;
+  c = echo(56789) ;
+  d = echo(0) ;
+#if 1
+  equaltest(a,b) ;
+  done(7) ;
+  equaltest(a,c) ;
+  done(8) ;
+  whiletest(3) ;  /* worked */
+  done(3) ;
+  while3(3) ;
+  done(6) ;
+#endif  
+  neqtest(a,b) ; 
+  neqtest(a,b) ; 
+  neqtest(a,c) ; 
+  zerotest(d) ;
+  zerotest(a) ;
+  done(5) ;
+  nonzerotest(d) ;
+  done(4) ;
+  nonzerotest(a) ;
+  done(111) ;
+  return 1 ;
+}
diff --git a/gdb/testsuite/gdb.base/break.c b/gdb/testsuite/gdb.base/break.c
new file mode 100644
index 0000000..491d6e5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/break.c
@@ -0,0 +1,81 @@
+#ifdef vxworks
+
+#  include <stdio.h>
+
+/* VxWorks does not supply atoi.  */
+static int
+atoi (z)
+     char *z;
+{
+  int i = 0;
+
+  while (*z >= '0' && *z <= '9')
+    i = i * 10 + (*z++ - '0');
+  return i;
+}
+
+/* I don't know of any way to pass an array to VxWorks.  This function
+   can be called directly from gdb.  */
+
+vxmain (arg)
+char *arg;
+{
+  char *argv[2];
+
+  argv[0] = "";
+  argv[1] = arg;
+  main (2, argv, (char **) 0);
+}
+
+#else /* ! vxworks */
+#  include <stdio.h>
+#endif /* ! vxworks */
+
+/*
+ * The following functions do nothing useful.  They are included simply
+ * as places to try setting breakpoints at.  They are explicitly
+ * "one-line functions" to verify that this case works (some versions
+ * of gcc have or have had problems with this).
+ */
+
+int marker1 () { return (0); }
+int marker2 (a) int a; { return (1); }
+void marker3 (a, b) char *a, *b; {}
+void marker4 (d) long d; {}
+
+/*
+ *	This simple classical example of recursion is useful for
+ *	testing stack backtraces and such.
+ */
+
+int
+main (argc, argv, envp)
+int argc;
+char *argv[], **envp;
+{
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    if (argc == 123456) {
+	fprintf (stderr, "usage:  factorial <number>\n");
+	return 1;
+    }
+    printf ("%d\n", factorial (atoi ("6")));
+
+    marker1 ();
+    marker2 (43);
+    marker3 ("stack", "trace");
+    marker4 (177601976L);
+    return 0;
+}
+
+int factorial (value)
+int value;
+{
+    if (value > 1) {
+	value *= factorial (value - 1);
+    }
+    return (value);
+}
+
diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp
new file mode 100644
index 0000000..b8f1d7f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/break.exp
@@ -0,0 +1,769 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+#
+# test simple breakpoint setting commands
+#
+
+# Test deleting all breakpoints when there are none installed,
+# GDB should not prompt for confirmation.
+# Note that gdb-init.exp provides a "delete_breakpoints" proc
+# for general use elsewhere.
+
+send_gdb "delete breakpoints\n"
+gdb_expect {
+     -re "Delete all breakpoints.*$" {
+	    send_gdb "y\n"
+	    gdb_expect {
+		-re "$gdb_prompt $" {
+		    fail "Delete all breakpoints when none (unexpected prompt)"
+		}
+		timeout	{ fail "Delete all breakpoints when none (timeout after unexpected prompt)" }
+	    }
+	}
+     -re ".*$gdb_prompt $"       { pass "Delete all breakpoints when none" }
+    timeout	            { fail "Delete all breakpoints when none (timeout)" }
+}
+
+#
+# test break at function
+#
+gdb_test "break main" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "breakpoint function"
+
+#
+# test break at function in file
+#
+gdb_test "break $srcfile:factorial" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "breakpoint function in file"
+
+#
+# test break at line number
+#
+gdb_test "break 64" \
+    "Breakpoint.*at.* file .*$srcfile, line 64\\." \
+    "breakpoint line number"
+
+#
+# test duplicate breakpoint
+#
+gdb_test "break 64" \
+    "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line 64\\." \
+    "breakpoint duplicate"
+
+#
+# test break at line number in file
+#
+gdb_test "break $srcfile:70" \
+    "Breakpoint.*at.* file .*$srcfile, line 70\\." \
+    "breakpoint line number in file"
+
+
+#
+# check to see what breakpoints are set
+#
+if [target_info exists gdb_stub] {
+    set main_line 57
+} else {
+    set main_line 60
+}
+
+gdb_test "info break" \
+    "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$main_line.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in factorial at .*$srcfile:76.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:64.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:64.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:70" \
+    "breakpoint info"
+
+
+# FIXME: The rest of this test doesn't work with anything that can't
+# handle arguments.
+# Huh? There doesn't *appear* to be anything that passes arguments
+# below.
+if [istarget "mips-idt-*"] then {
+    return
+}
+
+#
+# run until the breakpoint at main is hit. For non-stubs-using targets.
+#
+if ![target_info exists use_gdb_stub] {
+  if [istarget "*-*-vxworks*"] then {
+    send_gdb "run vxmain \"2\"\n"
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+  } else {
+	send_gdb "run\n"
+  }
+  gdb_expect {
+    -re "The program .* has been started already.*y or n. $" {
+	send_gdb "y\n"
+	exp_continue
+    }
+    -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:60.*60\[\t \]+if .argc.* \{.*$gdb_prompt $"\
+	                    { pass "run until function breakpoint" }
+    -re ".*$gdb_prompt $"       { fail "run until function breakpoint" }
+    timeout	            { fail "run until function breakpoint (timeout)" }
+  }
+} else {
+    if ![target_info exists gdb_stub] {
+	gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:60.*60\[\t \]+if .argc.*\{" "stub continue"
+    }
+}
+
+#
+# run until the breakpoint at a line number
+#
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:64.*64\[\t \]+printf.*factorial.*" \
+			"run until breakpoint set at a line number"
+
+#
+# Run until the breakpoint set in a function in a file
+#
+for {set i 6} {$i >= 1} {incr i -1} {
+	gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:76.*76\[\t \]+if .value > 1. \{" \
+			"run until file:function($i) breakpoint"
+}
+
+#
+# run until the file:function breakpoint at a line number in a file
+#
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:70.*70\[\t \]+return 0;" \
+		"run until file:linenum breakpoint"
+
+#
+# delete all breakpoints so we can start over, course this can be a test too
+#
+delete_breakpoints
+
+#
+# test temporary breakpoint at function
+#
+
+gdb_test "tbreak main" "Breakpoint.*at.* file .*$srcfile, line.*" "Temporary breakpoint function"
+
+#
+# test break at function in file
+#
+
+gdb_test "tbreak $srcfile:factorial" "Breakpoint.*at.* file .*$srcfile, line.*" \
+	"Temporary breakpoint function in file"
+
+#
+# test break at line number
+#
+send_gdb "tbreak 64\n"
+gdb_expect {
+    -re "Breakpoint.*at.* file .*$srcfile, line 64.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
+	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number #1" }
+	timeout	    { fail "breakpoint line number #1 (timeout)" }
+}
+
+gdb_test "tbreak 60" "Breakpoint.*at.* file .*$srcfile, line 60.*" "Temporary breakpoint line number #2"
+
+#
+# test break at line number in file
+#
+send_gdb "tbreak $srcfile:70\n"
+gdb_expect {
+    -re "Breakpoint.*at.* file .*$srcfile, line 70.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
+	-re ".*$gdb_prompt $"   { pass "Temporary breakpoint line number in file #1" }
+	timeout	    { fail "Temporary breakpoint line number in file #1 (timeout)" }
+}
+
+gdb_test  "tbreak $srcfile:66" "Breakpoint.*at.* file .*$srcfile, line 66.*" "Temporary breakpoint line number in file #2"
+
+#
+# check to see what breakpoints are set (temporary this time)
+#
+gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]\[0-9\]+\[\t \]+breakpoint     del.*y.*in factorial at .*$srcfile:76.*\[\r\n\]\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:64.*\[\r\n\]\[0-9\]+\[\t \]+breakpoint     del.*y.*in main at .*$srcfile:70.*" "Temporary breakpoint info"
+
+
+#***********
+
+# Verify that catchpoints for fork, vfork and exec don't trigger
+# inappropriately.  (There are no calls to those system functions
+# in this test program.)
+#
+if ![runto_main] then { fail "break tests suppressed" }
+
+send_gdb "catch\n"
+gdb_expect {
+  -re "Catch requires an event name.*$gdb_prompt $"\
+          {pass "catch requires an event name"}
+  -re "$gdb_prompt $"\
+          {fail "catch requires an event name"}
+  timeout {fail "(timeout) catch requires an event name"}
+}
+
+
+set name "set catch fork, never expected to trigger"
+send_gdb "catch fork\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .fork..*$gdb_prompt $"
+          {pass $name}
+  -re "Catch of fork not yet implemented.*$gdb_prompt $"
+	  {pass $name}
+  -re "$gdb_prompt $"
+          {fail $name}
+  timeout {fail "(timeout) $name"}
+}
+
+
+set name "set catch vfork, never expected to trigger"
+send_gdb "catch vfork\n"
+
+# If we are on HP-UX 10.20, we expect an error message to be
+# printed if we type "catch vfork" at the gdb gdb_prompt.  This is
+# because on HP-UX 10.20, we cannot catch vfork events.
+
+if [istarget "hppa*-hp-hpux10.20"] then {
+    gdb_expect {
+	-re "Catch of vfork events not supported on HP-UX 10.20..*$gdb_prompt $"
+		{pass $name}
+	-re "$gdb_prompt $"
+		{fail $name}
+	timeout {fail "(timeout) $name"}
+    }
+} else {
+    gdb_expect {
+	-re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $"
+		{pass $name}
+	-re "Catch of vfork not yet implemented.*$gdb_prompt $"
+		{pass $name}
+	-re "$gdb_prompt $"
+		{fail $name}
+	timeout {fail "(timeout) $name"}
+    }
+}
+
+set name "set catch exec, never expected to trigger"
+send_gdb "catch exec\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .exec..*$gdb_prompt $"
+          {pass $name}
+  -re "Catch of exec not yet implemented.*$gdb_prompt $"
+	  {pass $name}
+  -re "$gdb_prompt $" {fail $name}
+  timeout {fail "(timeout) $name"}
+}
+
+# Verify that "until <location>" works.  (This is really just syntactic
+# sugar for "tbreak <location>; continue".)
+#
+send_gdb "until 64\n"
+gdb_expect {
+  -re "main .* at .*:64.*$gdb_prompt $"\
+          {pass "until 64"}
+  -re "$gdb_prompt $"\
+          {fail "until 64"}
+  timeout {fail "(timeout) until 64"}
+}
+
+# Verify that a malformed "until" is gracefully caught.
+#
+send_gdb "until 65 then stop\n"
+gdb_expect {
+  -re "Junk at end of arguments..*$gdb_prompt $"\
+          {pass "malformed until"}
+  -re "$gdb_prompt $"\
+          {fail "malformed until"}
+  timeout {fail "(timeout) malformed until"}
+}
+
+# Verify that GDB responds gracefully when asked to set a breakpoint
+# on a nonexistent source line.
+#
+send_gdb "break 999\n"
+gdb_expect {
+  -re "No line 999 in file .*$gdb_prompt $"\
+          {pass "break on non-existent source line"}
+  -re "$gdb_prompt $"\
+          {fail "break on non-existent source line"}
+  timeout {fail "(timeout) break on non-existent source line"}
+}
+
+# Verify that GDB allows one to just say "break", which is treated
+# as the "default" breakpoint.  Note that GDB gets cute when printing
+# the informational message about other breakpoints at the same
+# location.  We'll hit that bird with this stone too.
+#
+send_gdb "break\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "break on default location, 1st time"}
+  -re "$gdb_prompt $"\
+          {fail "break on default location, 1st time"}
+  timeout {fail "(timeout) break on default location, 1st time"}
+}
+
+send_gdb "break\n"
+gdb_expect {
+  -re "Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "break on default location, 2nd time"}
+  -re "$gdb_prompt $"\
+          {fail "break on default location, 2nd time"}
+  timeout {fail "(timeout) break on default location, 2nd time"}
+}
+
+send_gdb "break\n"
+gdb_expect {
+  -re "Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "break on default location, 3rd time"}
+  -re "$gdb_prompt $"\
+          {fail "break on default location, 3rd time"}
+  timeout {fail "(timeout) break on default location, 3rd time"}
+}
+
+send_gdb "break\n"
+gdb_expect {
+  -re "Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "break on default location, 4th time"}
+  -re "$gdb_prompt $"\
+          {fail "break on default location, 4th time"}
+  timeout {fail "(timeout) break on default location, 4th time"}
+}
+
+# Verify that a "silent" breakpoint can be set, and that GDB is indeed
+# "silent" about its triggering.
+#
+if ![runto_main] then { fail "break tests suppressed" }
+
+send_gdb "break 64\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 64.*$gdb_prompt $"\
+          {pass "set to-be-silent break 64"}
+  -re "$gdb_prompt $"\
+          {fail "set to-be-silent break 64"}
+  timeout {fail "(timeout) set to-be-silent break 64"}
+}
+
+send_gdb "commands $expect_out(1,string)\n"
+send_gdb "silent\n"
+send_gdb "end\n"
+gdb_expect {
+  -re ".*$gdb_prompt $"\
+          {pass "set silent break 64"}
+  timeout {fail "(timeout) set silent break 64"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]*breakpoint.*:64\r\n\[ \t\]*silent.*$gdb_prompt $"\
+          {pass "info silent break 64"}
+  -re "$gdb_prompt $"\
+          {fail "info silent break 64"}
+  timeout {fail "(timeout) info silent break 64"}
+}
+send_gdb "continue\n"
+gdb_expect {
+  -re "Continuing.\r\n$gdb_prompt $"\
+          {pass "hit silent break 64"}
+  -re "$gdb_prompt $"\
+          {fail "hit silent break 64"}
+  timeout {fail "(timeout) hit silent break 64"}
+}
+send_gdb "bt\n"
+gdb_expect {
+  -re "#0  main .* at .*:64.*$gdb_prompt $"\
+          {pass "stopped for silent break 64"}
+  -re "$gdb_prompt $"\
+          {fail "stopped for silent break 64"}
+  timeout {fail "(timeout) stopped for silent break 64"}
+}
+
+# Verify that GDB can at least parse a breakpoint with the
+# "thread" keyword.  (We won't attempt to test here that a
+# thread-specific breakpoint really triggers appropriately.
+# The gdb.threads subdirectory contains tests for that.)
+#
+send_gdb "break 65 thread 999\n"
+gdb_expect {
+  -re "Unknown thread 999.*$gdb_prompt $"\
+          {pass "thread-specific breakpoint on non-existent thread disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "thread-specific breakpoint on non-existent thread disallowed"}
+  timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"}
+}
+send_gdb "break 65 thread foo\n"
+gdb_expect {
+  -re "Junk after thread keyword..*$gdb_prompt $"\
+          {pass "thread-specific breakpoint on bogus thread ID disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "thread-specific breakpoint on bogus thread ID disallowed"}
+  timeout {fail "(timeout) thread-specific breakpoint on bogus thread ID disallowed"}
+}
+
+# Verify that GDB responds gracefully to a breakpoint command with
+# trailing garbage.
+#
+send_gdb "break 65 foo\n"
+gdb_expect {
+  -re "Junk at end of arguments..*$gdb_prompt $"\
+          {pass "breakpoint with trailing garbage disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "breakpoint with trailing garbage disallowed"}
+  timeout {fail "(timeout) breakpoint with trailing garbage disallowed"}
+}
+
+# Verify that GDB responds gracefully to a "clear" command that has
+# no matching breakpoint.  (First, get us off the current source line,
+# which we know has a breakpoint.)
+#
+send_gdb "next\n"
+gdb_expect {
+  -re ".*$gdb_prompt $"\
+          {pass "step over breakpoint"}
+  timeout {fail "(timeout) step over breakpoint"}
+}
+send_gdb "clear 66\n"
+gdb_expect {
+  -re "No breakpoint at 66..*$gdb_prompt $"\
+          {pass "clear line has no breakpoint disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "clear line has no breakpoint disallowed"}
+  timeout {fail "(timeout) clear line has no breakpoint disallowed"}
+}
+send_gdb "clear\n"
+gdb_expect {
+  -re "No breakpoint at this line..*$gdb_prompt $"\
+          {pass "clear current line has no breakpoint disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "clear current line has no breakpoint disallowed"}
+  timeout {fail "(timeout) clear current line has no breakpoint disallowed"}
+}
+
+# Verify that a breakpoint can be set via a convenience variable.
+#
+send_gdb "set \$foo=66\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "set convenience variable \$foo to 66"}
+  timeout {fail "(timeout) set convenience variable \$foo to 66"}
+}
+send_gdb "break \$foo\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 66.*$gdb_prompt $"\
+          {pass "set breakpoint via convenience variable"}
+  -re "$gdb_prompt $"\
+          {fail "set breakpoint via convenience variable"}
+  timeout {fail "(timeout) set breakpoint via convenience variable"}
+}
+
+# Verify that GDB responds gracefully to an attempt to set a
+# breakpoint via a convenience variable whose type is not integer.
+#
+send_gdb "set \$foo=66.5\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "set convenience variable \$foo to 66.5"}
+  timeout {fail "(timeout) set convenience variable \$foo to 66.5"}
+}
+send_gdb "break \$foo\n"
+gdb_expect {
+  -re "Convenience variables used in line specs must have integer values..*$gdb_prompt $"\
+          {pass "set breakpoint via non-integer convenience variable disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "set breakpoint via non-integer convenience variable disallowed"}
+  timeout {fail "(timeout) set breakpoint via non-integer convenience variable disallowed"}
+}
+
+# Verify that we can set and trigger a breakpoint in a user-called function.
+#
+send_gdb "break marker2\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 42.*$gdb_prompt $"\
+          {pass "set breakpoint on to-be-called function"}
+  -re "$gdb_prompt $"\
+          {fail "set breakpoint on to-be-called function"}
+  timeout {fail "(timeout) set breakpoint on to-be-called function"}
+}
+send_gdb "print marker2(99)\n"
+gdb_expect {
+  -re "The program being debugged stopped while in a function called from GDB.\r\nWhen the function .marker2. is done executing, GDB will silently\r\nstop .instead of continuing to evaluate the expression containing\r\nthe function call...*$gdb_prompt $"\
+          {pass "hit breakpoint on called function"}
+  -re "$gdb_prompt $"\
+          {fail "hit breakpoint on called function"}
+  timeout {fail "(timeout) hit breakpoint on called function"}
+}
+
+# As long as we're stopped (breakpointed) in a called function,
+# verify that we can successfully backtrace & such from here.
+#
+if [istarget "hppa*-*-hpux*"] then {
+  send_gdb "bt\n"
+  gdb_expect {
+    -re "#0\[ \t\]*marker2.*:42\r\n#1.*_sr4export.*$gdb_prompt $"\
+            {pass "backtrace while in called function"}
+    -re "$gdb_prompt $"\
+            {fail "backtrace while in called function"}
+    timeout {fail "(timeout) backtrace while in called function"}
+  }
+  send_gdb "finish\n"
+  gdb_expect {
+    -re "Run till exit from .*marker2.* at .*42\r\n.* in _sr4export.*$gdb_prompt $"\
+            {pass "finish from called function"}
+    -re "$gdb_prompt $"\
+            {fail "finish from called function"}
+    timeout {fail "(timeout) finish from called function"}
+  }
+}
+
+# Verify that GDB responds gracefully to a "finish" command with
+# arguments.
+#
+if ![runto_main] then { fail "break tests suppressed" }
+
+send_gdb "finish 123\n"
+gdb_expect {
+  -re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\
+          {pass "finish with arguments disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "finish with arguments disallowed"}
+  timeout {fail "(timeout) finish with arguments disallowed"}
+}
+
+# Verify that GDB responds gracefully to a request to "finish" from
+# the outermost frame.
+#
+send_gdb "finish\n"
+gdb_expect {
+  -re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $"\
+          {pass "finish from outermost frame disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "finish from outermost frame disallowed"}
+  timeout {fail "(timeout) finish from outermost frame disallowed"}
+}
+
+# Verify that we can explicitly ask GDB to stop on all shared library
+# events, and that it does so.
+#
+if [istarget "hppa*-*-hpux*"] then {
+  if ![runto_main] then { fail "break tests suppressed" }
+
+  send_gdb "set stop-on-solib-events 1\n"
+  gdb_expect {
+    -re "$gdb_prompt $"\
+            {pass "set stop-on-solib-events"}
+    timeout {fail "(timeout) set stop-on-solib-events"}
+  }
+
+  send_gdb "run\n"
+  gdb_expect {
+    -re ".*Start it from the beginning.*y or n. $"\
+            {send_gdb "y\n"
+             gdb_expect {
+               -re ".*Stopped due to shared library event.*$gdb_prompt $"\
+                       {pass "triggered stop-on-solib-events"}
+               -re "$gdb_prompt $"\
+                       {fail "triggered stop-on-solib-events"}
+               timeout {fail "(timeout) triggered stop-on-solib-events"}
+             }
+            }
+    -re "$gdb_prompt $"\
+            {fail "rerun for stop-on-solib-events"}
+    timeout {fail "(timeout) rerun for stop-on-solib-events"}
+  }
+
+  send_gdb "set stop-on-solib-events 0\n"
+  gdb_expect {
+    -re "$gdb_prompt $"\
+            {pass "reset stop-on-solib-events"}
+    timeout {fail "(timeout) reset stop-on-solib-events"}
+  }
+}
+
+# Hardware breakpoints are unsupported on HP-UX.  Verify that GDB
+# gracefully responds to requests to create them.
+#
+if [istarget "hppa*-*-hpux*"] then {
+  if ![runto_main] then { fail "break tests suppressed" }
+
+  send_gdb "hbreak\n"
+  gdb_expect {
+    -re "No hardware breakpoint support in the target.*$gdb_prompt $"\
+            {pass "hw breaks disallowed"}
+    -re "$gdb_prompt $"\
+            {fail "hw breaks disallowed"}
+    timeout {fail "(timeout) hw breaks disallowed"}
+  }
+
+  send_gdb "thbreak\n"
+  gdb_expect {
+    -re "No hardware breakpoint support in the target.*$gdb_prompt $"\
+            {pass "temporary hw breaks disallowed"}
+    -re "$gdb_prompt $"\
+            {fail "temporary hw breaks disallowed"}
+    timeout {fail "(timeout) temporary hw breaks disallowed"}
+  }
+}
+
+#********
+
+
+proc test_clear_command {} {
+    gdb_test "break main" "Breakpoint.*at.*" "break main #1"
+    gdb_test "break main" "Breakpoint.*at.*" "break main #2"
+
+    # We don't test that it deletes the correct breakpoints.  We do at
+    # least test that it deletes more than one breakpoint.
+    gdb_test "clear main" {Deleted breakpoints [0-9]+ [0-9]+.*}
+}
+
+#
+# Test "next" over recursive function call.
+#
+
+proc test_next_with_recursion {} { 
+    global gdb_prompt
+    global decimal
+    global binfile
+
+    if [target_info exists use_gdb_stub] {
+	# Reload the program.
+	delete_breakpoints
+	gdb_load ${binfile};
+    } else {
+	# FIXME: should be using runto
+	gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y"
+
+	delete_breakpoints
+    }
+
+    gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial"
+
+    # Run until we call factorial with 6
+
+    if [istarget "*-*-vxworks*"] then {
+	send_gdb "run vxmain \"6\"\n"
+    } else {
+	gdb_run_cmd
+    }
+    gdb_expect {
+	-re "Break.* factorial .value=6. .*$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" {
+	    fail "run to factorial(6)";
+	    gdb_suppress_tests;
+	}
+	timeout { fail "run to factorial(6) (timeout)" ; gdb_suppress_tests }
+    }
+
+    # Continue until we call factorial recursively with 5.
+
+    if [gdb_test "continue" \
+	"Continuing.*Break.* factorial .value=5. .*" \
+	"continue to factorial(5)"] then { gdb_suppress_tests }
+
+    # Do a backtrace just to confirm how many levels deep we are.
+
+    if [gdb_test "backtrace" \
+	"#0\[ \t\]+ factorial .value=5..*" \
+	"backtrace from factorial(5)"] then { gdb_suppress_tests }
+
+    # Now a "next" should position us at the recursive call, which
+    # we will be performing with 4.
+
+    if [gdb_test "next" \
+	".* factorial .value - 1.;.*" \
+	"next to recursive call"] then { gdb_suppress_tests }
+
+    # Disable the breakpoint at the entry to factorial by deleting them all.
+    # The "next" should run until we return to the next line from this
+    # recursive call to factorial with 4.
+    # Buggy versions of gdb will stop instead at the innermost frame on
+    # the line where we are trying to "next" to.
+
+    delete_breakpoints
+
+    if [istarget "mips*tx39-*"] {
+	set timeout 60
+    } else {
+	set timeout 20
+    }
+
+    gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \
+	    "next over recursive call"
+
+    # OK, we should be back in the same stack frame we started from.
+    # Do a backtrace just to confirm.
+
+    set result [gdb_test "backtrace" \
+	    "#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \
+	    "backtrace from factorial(5.1)"]
+    if { $result != 0 } { gdb_suppress_tests }
+
+    if [target_info exists gdb,noresults] { gdb_suppress_tests }
+    if [target_info exists use_gdb_stub] {
+	gdb_breakpoint "exit"
+	gdb_test "continue" "Continuing..*Breakpoint .*exit \[(\].*=0\[)\].*" "continue until exit in recursive next test"
+    } else {
+    # Continue until we exit.  Should not stop again.
+    # Don't bother to check the output of the program, that may be
+    # extremely tough for some remote systems.
+	gdb_test "continue"\
+		"Continuing.\[\r\n0-9\]+Program exited normally\\..*"\
+		"continue until exit in recursive next test"
+    }
+    gdb_stop_suppressing_tests;
+}
+
+test_clear_command
+test_next_with_recursion
+
+# Reset the default arguments for VxWorks
+if [istarget "*-*-vxworks*"] {
+    set timeout 10
+    verbose "Timeout is now $timeout seconds" 2
+    send_gdb "set args main\n"
+    gdb_expect -re ".*$gdb_prompt $" {}
+}
diff --git a/gdb/testsuite/gdb.base/call-ar-st.c b/gdb/testsuite/gdb.base/call-ar-st.c
new file mode 100644
index 0000000..c61977a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-ar-st.c
@@ -0,0 +1,1137 @@
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/**************************************************************************
+ * TESTS :
+ *   -- function arguments that are enumerated types
+ *   -- small structure arguments ( <= 64 bits ) 
+ *            -- stored in registers
+ *            -- stored on the stack
+ *   -- large structure arguments ( > 64 bits )
+ *            -- stored in registers
+ *            -- stored on the stack
+ *   -- array arguments
+ *   -- caller is a leaf routine :
+ *            -- use the call command from within an init routine (i.e.
+ *               init_bit_flags, init_bit_flags_combo, init_array_rep)
+ *   -- caller doesn't have enough space for all the function arguments :
+ *            -- call print_long_arg_list from inside print_small_structs
+ ***************************************************************************/
+
+/* Some enumerated types -- used to test that the structureal data type is
+ * retrieved for function arguments with typedef data types.
+ */
+typedef int id_int;
+
+typedef enum { 
+	      BLACK,
+	      BLUE,
+	      BROWN,
+	      ECRUE,
+	      GOLD,
+	      GRAY,
+	      GREEN,
+	      IVORY,
+	      MAUVE,
+	      ORANGE,
+	      PINK,
+	      PURPLE,
+	      RED,
+	      SILVER,
+	      TAN,
+	      VIOLET,
+	      WHITE,
+	      YELLOW} colors;
+
+/* A large structure (> 64 bits) used to test passing large structures as
+ * parameters
+ */
+
+struct array_rep_info_t {
+   int   next_index[10]; 
+   int   values[10];
+   int   head;
+};
+
+/*****************************************************************************
+ * Small structures ( <= 64 bits). These are used to test passing small 
+ * structures as parameters and test argument size promotion.
+ *****************************************************************************/
+
+ /* 64 bits
+  */
+struct small_rep_info_t {
+   int   value;
+   int   head;
+};
+
+/* 6 bits : really fits in 8 bits and is promoted to 32 bits
+ */
+struct bit_flags_t {
+       unsigned alpha   :1;
+       unsigned beta    :1;
+       unsigned gamma   :1;
+       unsigned delta   :1;
+       unsigned epsilon :1;
+       unsigned omega   :1;
+};
+
+/* 22 bits : really fits in 40 bits and is promoted to 64 bits
+ */
+struct bit_flags_combo_t {
+       unsigned alpha   :1;
+       unsigned beta    :1;
+       char     ch1;
+       unsigned gamma   :1;
+       unsigned delta   :1;
+       char     ch2;
+       unsigned epsilon :1;
+       unsigned omega   :1;
+};
+
+/* 64 bits
+ */
+struct one_double_t {
+       double double1;
+};
+
+/* 64 bits
+ */
+struct two_floats_t {
+       float float1;
+       float float2;
+};
+
+/* 16 bits : promoted to 32 bits
+ */
+struct two_char_t {
+       char ch1;
+       char ch2;
+};
+
+/* 24 bits : promoted to 32 bits
+ */
+struct three_char_t {
+       char ch1;
+       char ch2;
+       char ch3;
+};
+
+/* 40 bits : promoted to 64 bits
+ */
+struct five_char_t {
+       char ch1;
+       char ch2;
+       char ch3;
+       char ch4;
+       char ch5;
+};
+
+/* 40 bits : promoted to 64 bits
+ */
+struct int_char_combo_t {
+       int  int1;
+       char ch1;
+};
+
+/*****************************************************************
+ * PRINT_STUDENT_ID_SHIRT_COLOR : 
+ * IN     id_int student       -- enumerated type
+ * IN     colors shirt         -- enumerated type
+ *****************************************************************/
+void print_student_id_shirt_color ( student, shirt ) 
+ id_int student;
+ colors shirt;
+{
+
+ printf("student id : %d\t", student);
+ printf("shirt color : ");
+ switch (shirt) {
+   case BLACK :  printf("BLACK\n"); 
+		 break;
+   case BLUE :   printf("BLUE\n");
+		 break;
+   case BROWN :  printf("BROWN\n");
+		 break;
+   case ECRUE :  printf("ECRUE\n");
+		 break;
+   case GOLD :   printf("GOLD\n");
+		 break;
+   case GRAY :   printf("GRAY\n");
+		 break;
+   case GREEN :  printf("GREEN\n");
+		 break;
+   case IVORY :  printf("IVORY\n");
+		 break;
+   case MAUVE :  printf("MAUVE\n");
+		 break;
+   case ORANGE : printf("ORANGE\n");
+		 break;
+   case PINK :   printf("PINK\n");
+		 break;
+   case PURPLE : printf("PURPLE\n");
+		 break;
+   case RED :    printf("RED\n");
+		 break;
+   case SILVER : printf("SILVER\n");
+		 break;
+   case TAN :    printf("TAN\n");
+		 break;
+   case VIOLET : printf("VIOLET\n");
+		 break;
+   case WHITE :  printf("WHITE\n");
+		 break;
+   case YELLOW : printf("YELLOW\n");
+		 break;
+ }
+}
+
+/*****************************************************************
+ * PRINT_CHAR_ARRAY : 
+ * IN     char  array_c[]      -- character array 
+ *****************************************************************/
+void print_char_array ( array_c ) 
+     char    array_c[];
+
+{
+
+  int index;
+
+  printf("array_c :\n");
+  printf("=========\n\n");
+  for (index = 0; index < 120; index++) {
+      printf("%1c", array_c[index]); 
+      if ((index%50) == 0) printf("\n");
+  }
+  printf("\n\n");
+}
+
+/*****************************************************************
+ * PRINT_DOUBLE_ARRAY : 
+ * IN     double array_d[]      -- array of doubles
+ *****************************************************************/
+void print_double_array (array_d) 
+     double  array_d[];
+
+{
+
+  int index;
+
+  printf("array_d :\n");
+  printf("=========\n\n");
+  for (index = 0; index < 100; index++) {
+      printf("%f  ", array_d[index]); 
+      if ((index%8) == 0) printf("\n");
+  }
+  printf("\n\n");
+}
+
+/*****************************************************************
+ * PRINT_FLOAT_ARRAY: 
+ * IN     float array_f[]      -- array of floats 
+ *****************************************************************/
+void print_float_array ( array_f )
+     float array_f[];
+
+{
+
+  int index;
+
+  printf("array_f :\n");
+  printf("=========\n\n");
+  for (index = 0; index < 15; index++) {
+      printf("%f  ", array_f[index]); 
+      if ((index%8) == 0) printf("\n");
+
+  }
+  printf("\n\n");
+}
+
+/*****************************************************************
+ * PRINT_INT_ARRAY: 
+ * IN     int  array_i[]      -- array of integers 
+ *****************************************************************/
+void print_int_array ( array_i )
+     int array_i[];
+
+{
+
+  int index;
+
+  printf("array_i :\n");
+  printf("=========\n\n");
+  for (index = 0; index < 50; index++) {
+      printf("%d  ", array_i[index]); 
+      if ((index%8) == 0) printf("\n");
+  }
+  printf("\n\n");
+
+}
+
+/*****************************************************************
+ * PRINT_ALL_ARRAYS: 
+ * IN     int  array_i[]      -- array of integers 
+ * IN     char array_c[]      -- array of characters 
+ * IN     float array_f[]      -- array of floats 
+ * IN     double array_d[]      -- array of doubles 
+ *****************************************************************/
+void print_all_arrays( array_i, array_c, array_f, array_d )
+     int array_i[];
+     char array_c[];
+     float array_f[];
+     double array_d[];
+
+{
+  print_int_array(array_i);
+  print_char_array(array_c);
+  print_float_array(array_f);
+  print_double_array(array_d);
+}
+
+/*****************************************************************
+ * LOOP_COUNT : 
+ * A do nothing function. Used to provide a point at which calls can be made.  
+ *****************************************************************/
+void loop_count () {
+
+     int index;
+
+     for (index=0; index<4; index++);
+}
+
+/*****************************************************************
+ * COMPUTE_WITH_SMALL_STRUCTS : 
+ * A do nothing function. Used to provide a point at which calls can be made.  
+ * IN  int seed
+ *****************************************************************/
+void compute_with_small_structs ( seed ) 
+ int seed;
+{
+
+     struct small_rep_info_t array[4];
+     int index;
+
+     for (index = 0; index < 4; index++) {
+         array[index].value = index*seed;
+	 array[index].head = (index+1)*seed;
+     }
+
+     for (index = 1; index < 4; index++) {
+	 array[index].value = array[index].value + array[index-1].value;
+	 array[index].head = array[index].head + array[index-1].head;
+     }
+}
+
+/*****************************************************************
+ * INIT_BIT_FLAGS :
+ * Initializes a bit_flags_t structure. Can call this function see
+ * the call command behavior when integer arguments do not fit into
+ * registers and must be placed on the stack.
+ * OUT struct bit_flags_t *bit_flags -- structure to be filled
+ * IN  unsigned a  -- 0 or 1 
+ * IN  unsigned b  -- 0 or 1 
+ * IN  unsigned g  -- 0 or 1 
+ * IN  unsigned d  -- 0 or 1 
+ * IN  unsigned e  -- 0 or 1 
+ * IN  unsigned o  -- 0 or 1 
+ *****************************************************************/
+void init_bit_flags ( bit_flags, a, b, g, d, e, o )
+struct bit_flags_t *bit_flags;
+unsigned a;
+unsigned b;
+unsigned g;
+unsigned d;
+unsigned e;
+unsigned o; 
+{
+
+   bit_flags->alpha = a;
+   bit_flags->beta = b;
+   bit_flags->gamma = g;
+   bit_flags->delta = d;
+   bit_flags->epsilon = e;
+   bit_flags->omega = o;
+}
+
+/*****************************************************************
+ * INIT_BIT_FLAGS_COMBO :
+ * Initializes a bit_flags_combo_t structure. Can call this function
+ * to see the call command behavior when integer and character arguments
+ * do not fit into registers and must be placed on the stack.
+ * OUT struct bit_flags_combo_t *bit_flags_combo -- structure to fill
+ * IN  unsigned a  -- 0 or 1 
+ * IN  unsigned b  -- 0 or 1 
+ * IN  char     ch1
+ * IN  unsigned g  -- 0 or 1 
+ * IN  unsigned d  -- 0 or 1 
+ * IN  char     ch2
+ * IN  unsigned e  -- 0 or 1 
+ * IN  unsigned o  -- 0 or 1 
+ *****************************************************************/
+void init_bit_flags_combo ( bit_flags_combo, a, b, ch1, g, d, ch2, e, o )
+     struct bit_flags_combo_t *bit_flags_combo;
+     unsigned a;
+     unsigned b;
+     char     ch1;
+     unsigned g;
+     unsigned d;
+     char     ch2;
+     unsigned e;
+     unsigned o; 
+{
+
+   bit_flags_combo->alpha = a;
+   bit_flags_combo->beta = b;
+   bit_flags_combo->ch1 = ch1;
+   bit_flags_combo->gamma = g;
+   bit_flags_combo->delta = d;
+   bit_flags_combo->ch2 = ch2;
+   bit_flags_combo->epsilon = e;
+   bit_flags_combo->omega = o;
+}
+
+
+/*****************************************************************
+ * INIT_ONE_DOUBLE : 
+ * OUT  struct one_double_t *one_double  -- structure to fill 
+ * IN   double init_val
+ *****************************************************************/
+void init_one_double ( one_double, init_val )
+     struct one_double_t *one_double;
+     double init_val; 
+{
+
+     one_double->double1  = init_val;
+}
+
+/*****************************************************************
+ * INIT_TWO_FLOATS : 
+ * OUT struct two_floats_t *two_floats -- structure to be filled
+ * IN  float init_val1 
+ * IN  float init_val2 
+ *****************************************************************/
+void init_two_floats ( two_floats, init_val1, init_val2 )
+     struct two_floats_t *two_floats; 
+     float init_val1;
+     float init_val2;
+{
+     two_floats->float1 = init_val1;
+     two_floats->float2 = init_val2;
+}
+
+/*****************************************************************
+ * INIT_TWO_CHARS : 
+ * OUT struct two_char_t *two_char -- structure to be filled
+ * IN  char init_val1 
+ * IN  char init_val2 
+ *****************************************************************/
+void init_two_chars ( two_char, init_val1, init_val2 )
+     struct two_char_t *two_char;
+     char init_val1;
+     char init_val2; 
+{
+
+     two_char->ch1 = init_val1;
+     two_char->ch2 = init_val2;
+}
+
+/*****************************************************************
+ * INIT_THREE_CHARS : 
+ * OUT struct three_char_t *three_char -- structure to be filled
+ * IN  char init_val1 
+ * IN  char init_val2 
+ * IN  char init_val3 
+ *****************************************************************/
+void init_three_chars ( three_char, init_val1, init_val2, init_val3 )  
+     struct three_char_t *three_char; 
+     char init_val1;
+     char init_val2;
+     char init_val3;
+{
+
+     three_char->ch1 = init_val1;
+     three_char->ch2 = init_val2;
+     three_char->ch3 = init_val3;
+}
+
+/*****************************************************************
+ * INIT_FIVE_CHARS : 
+ * OUT struct five_char_t *five_char -- structure to be filled
+ * IN  char init_val1 
+ * IN  char init_val2 
+ * IN  char init_val3 
+ * IN  char init_val4 
+ * IN  char init_val5 
+ *****************************************************************/
+void init_five_chars ( five_char, init_val1, init_val2, init_val3,init_val4,init_val5 )
+     struct five_char_t *five_char;
+     char init_val1;
+     char init_val2;
+     char init_val3;
+     char init_val4;
+     char init_val5;
+{
+     five_char->ch1 = init_val1;
+     five_char->ch2 = init_val2;
+     five_char->ch3 = init_val3;
+     five_char->ch4 = init_val4;
+     five_char->ch5 = init_val5;
+}
+
+/*****************************************************************
+ * INIT_INT_CHAR_COMBO : 
+ * OUT struct int_char_combo_t *combo -- structure to be filled
+ * IN  int  init_val1 
+ * IN  char init_val2 
+ *****************************************************************/
+void init_int_char_combo ( combo, init_val1, init_val2 )
+     struct int_char_combo_t *combo;
+     int init_val1; 
+     char init_val2; 
+{
+
+     combo->int1 = init_val1;
+     combo->ch1 = init_val2;
+}
+
+/*****************************************************************
+ * INIT_STRUCT_REP : 
+ * OUT struct small_rep_into_t *small_struct -- structure to be filled
+ * IN  int  seed 
+ *****************************************************************/
+void init_struct_rep( small_struct, seed )
+     struct small_rep_info_t *small_struct;
+     int    seed;
+
+{
+
+      small_struct->value = 2 + (seed*2); 
+      small_struct->head = 0; 
+}
+
+/*****************************************************************
+ * INIT_SMALL_STRUCTS : 
+ * Takes all the small structures as input and calls the appropriate
+ * initialization routine for each structure
+ *****************************************************************/
+void init_small_structs (struct1, struct2, struct3,struct4,flags,flags_combo,
+three_char, five_char,int_char_combo, d1, d2,d3,f1,f2,f3)
+     struct small_rep_info_t  *struct1;
+     struct small_rep_info_t  *struct2;
+     struct small_rep_info_t  *struct3;
+     struct small_rep_info_t  *struct4;
+     struct bit_flags_t       *flags;
+     struct bit_flags_combo_t *flags_combo;
+     struct three_char_t      *three_char;
+     struct five_char_t       *five_char;
+     struct int_char_combo_t  *int_char_combo;
+     struct one_double_t      *d1;
+     struct one_double_t      *d2;
+     struct one_double_t      *d3;
+     struct two_floats_t      *f1;
+     struct two_floats_t      *f2;
+     struct two_floats_t      *f3;
+
+{
+
+     init_bit_flags(flags, (unsigned)1, (unsigned)0, (unsigned)1, 
+		           (unsigned)0, (unsigned)1, (unsigned)0 ); 
+     init_bit_flags_combo(flags_combo, (unsigned)1, (unsigned)0, 'y',
+				       (unsigned)1, (unsigned)0, 'n',
+                    		       (unsigned)1, (unsigned)0 ); 
+     init_three_chars(three_char, 'a', 'b', 'c');
+     init_five_chars(five_char, 'l', 'm', 'n', 'o', 'p');
+     init_int_char_combo(int_char_combo, 123, 'z');
+     init_struct_rep(struct1, 2);
+     init_struct_rep(struct2, 4);
+     init_struct_rep(struct3, 5);
+     init_struct_rep(struct4, 6);
+     init_one_double ( d1, 10.5); 
+     init_one_double ( d2, -3.34); 
+     init_one_double ( d3, 675.09123); 
+     init_two_floats ( f1, 45.234, 43.6); 
+     init_two_floats ( f2, 78.01, 122.10); 
+     init_two_floats ( f3, -1232.345, -199.21); 
+}
+
+/*****************************************************************
+ * PRINT_TEN_DOUBLES : 
+ * ?????????????????????????????
+ ****************************************************************/
+void print_ten_doubles ( d1, d2, d3, d4, d5, d6, d7, d8, d9, d10 )
+     double d1;
+     double d2;
+     double d3;
+     double d4;
+     double d5;
+     double d6;
+     double d7;
+     double d8;
+     double d9;
+     double d10; 
+{
+
+  printf("Two Doubles : %f\t%f\n", d1, d2);
+  printf("Two Doubles : %f\t%f\n", d3, d4);
+  printf("Two Doubles : %f\t%f\n", d5, d6);
+  printf("Two Doubles : %f\t%f\n", d7, d8);
+  printf("Two Doubles : %f\t%f\n", d9, d10);
+}
+
+/*****************************************************************
+ * PRINT_BIT_FLAGS : 
+ * IN struct bit_flags_t bit_flags 
+ ****************************************************************/
+void print_bit_flags ( bit_flags )
+struct bit_flags_t bit_flags;
+{
+
+     if (bit_flags.alpha) printf("alpha\n");
+     if (bit_flags.beta) printf("beta\n");
+     if (bit_flags.gamma) printf("gamma\n");
+     if (bit_flags.delta) printf("delta\n");
+     if (bit_flags.epsilon) printf("epsilon\n");
+     if (bit_flags.omega) printf("omega\n");
+}
+
+/*****************************************************************
+ * PRINT_BIT_FLAGS_COMBO : 
+ * IN struct bit_flags_combo_t bit_flags_combo 
+ ****************************************************************/
+void print_bit_flags_combo ( bit_flags_combo )
+struct bit_flags_combo_t bit_flags_combo;
+{
+
+     if (bit_flags_combo.alpha) printf("alpha\n");
+     if (bit_flags_combo.beta) printf("beta\n");
+     if (bit_flags_combo.gamma) printf("gamma\n");
+     if (bit_flags_combo.delta) printf("delta\n");
+     if (bit_flags_combo.epsilon) printf("epsilon\n");
+     if (bit_flags_combo.omega) printf("omega\n");
+     printf("ch1: %c\tch2: %c\n", bit_flags_combo.ch1, bit_flags_combo.ch2);
+}
+
+/*****************************************************************
+ * PRINT_ONE_DOUBLE : 
+ * IN struct one_double_t one_double 
+ ****************************************************************/
+void print_one_double ( one_double )
+struct one_double_t one_double;
+{
+
+     printf("Contents of one_double_t: \n\n");
+     printf("%f\n", one_double.double1);
+}
+
+/*****************************************************************
+ * PRINT_TWO_FLOATS : 
+ * IN struct two_floats_t two_floats 
+ ****************************************************************/
+void print_two_floats ( two_floats )
+struct two_floats_t two_floats; 
+{
+
+     printf("Contents of two_floats_t: \n\n");
+     printf("%f\t%f\n", two_floats.float1, two_floats.float2);
+}
+
+/*****************************************************************
+ * PRINT_TWO_CHARS : 
+ * IN struct two_char_t two_char
+ ****************************************************************/
+void print_two_chars ( two_char )
+struct two_char_t two_char; 
+{
+
+     printf("Contents of two_char_t: \n\n");
+     printf("%c\t%c\n", two_char.ch1, two_char.ch2);
+}
+
+/*****************************************************************
+ * PRINT_THREE_CHARS : 
+ * IN struct three_char_t three_char
+ ****************************************************************/
+void print_three_chars ( three_char )
+struct three_char_t three_char;
+{
+
+     printf("Contents of three_char_t: \n\n");
+     printf("%c\t%c\t%c\n", three_char.ch1, three_char.ch2, three_char.ch3);
+}
+
+/*****************************************************************
+ * PRINT_FIVE_CHARS : 
+ * IN struct five_char_t five_char
+ ****************************************************************/
+void print_five_chars ( five_char ) 
+struct five_char_t five_char; 
+{
+
+     printf("Contents of five_char_t: \n\n");
+     printf("%c\t%c\t%c\t%c\t%c\n", five_char.ch1, five_char.ch2, 
+				    five_char.ch3, five_char.ch4, 
+				    five_char.ch5);
+}
+
+/*****************************************************************
+ * PRINT_INT_CHAR_COMBO : 
+ * IN struct int_char_combo_t int_char_combo
+ ****************************************************************/
+void print_int_char_combo ( int_char_combo )
+struct int_char_combo_t int_char_combo;
+{
+
+     printf("Contents of int_char_combo_t: \n\n");
+     printf("%d\t%c\n", int_char_combo.int1, int_char_combo.ch1);
+}     
+
+/*****************************************************************
+ * PRINT_STRUCT_REP : 
+ * The last parameter must go onto the stack rather than into a register.
+ * This is a good function to call to test small structures.
+ * IN struct small_rep_info_t  struct1
+ * IN struct small_rep_info_t  struct2
+ * IN struct small_rep_info_t  struct3
+ ****************************************************************/
+void print_struct_rep( struct1, struct2, struct3)
+     struct small_rep_info_t struct1;
+     struct small_rep_info_t struct2;
+     struct small_rep_info_t struct3;
+
+{
+
+
+  printf("Contents of struct1: \n\n");
+  printf("%10d%10d\n", struct1.value, struct1.head); 
+  printf("Contents of struct2: \n\n");
+  printf("%10d%10d\n", struct2.value, struct2.head); 
+  printf("Contents of struct3: \n\n");
+  printf("%10d%10d\n", struct3.value, struct3.head); 
+
+}
+
+/*****************************************************************
+ * SUM_STRUCT_PRINT : 
+ * The last two parameters must go onto the stack rather than into a register.
+ * This is a good function to call to test small structures.
+ * IN struct small_rep_info_t  struct1
+ * IN struct small_rep_info_t  struct2
+ * IN struct small_rep_info_t  struct3
+ * IN struct small_rep_info_t  struct4
+ ****************************************************************/
+void sum_struct_print ( seed, struct1, struct2, struct3, struct4) 
+     int seed;
+     struct small_rep_info_t struct1;
+     struct small_rep_info_t struct2; 
+     struct small_rep_info_t struct3; 
+     struct small_rep_info_t struct4; 
+
+{
+     int sum;
+
+     printf("Sum of the 4 struct values and seed : \n\n");
+     sum = seed + struct1.value + struct2.value + struct3.value + struct4.value;
+     printf("%10d\n", sum);
+}
+
+/*****************************************************************
+ * PRINT_SMALL_STRUCTS : 
+ * This is a good function to call to test small structures.
+ * All of the small structures of odd sizes (40 bits, 8bits, etc.)
+ * are pushed onto the stack.
+ ****************************************************************/
+void print_small_structs ( struct1, struct2, struct3,  struct4, flags, 
+flags_combo, three_char, five_char, int_char_combo, d1, d2,d3,f1,f2,f3)
+     struct small_rep_info_t  struct1;
+     struct small_rep_info_t  struct2;
+     struct small_rep_info_t  struct3;
+     struct small_rep_info_t  struct4;
+     struct bit_flags_t       flags;
+     struct bit_flags_combo_t flags_combo;
+     struct three_char_t      three_char;
+     struct five_char_t       five_char;
+     struct int_char_combo_t  int_char_combo;
+     struct one_double_t      d1;
+     struct one_double_t      d2;
+     struct one_double_t      d3;
+     struct two_floats_t      f1;
+     struct two_floats_t      f2;
+     struct two_floats_t      f3;
+{
+   print_bit_flags(flags);
+   print_bit_flags_combo(flags_combo);
+   print_three_chars(three_char);
+   print_five_chars(five_char);
+   print_int_char_combo(int_char_combo);
+   sum_struct_print(10, struct1, struct2, struct3, struct4);
+   print_struct_rep(struct1, struct2, struct3);
+   print_one_double(d1);
+   print_one_double(d2);
+   print_one_double(d3);
+   print_two_floats(f1);
+   print_two_floats(f2);
+   print_two_floats(f3);
+}
+
+/*****************************************************************
+ * PRINT_LONG_ARG_LIST : 
+ * This is a good function to call to test small structures.
+ * The first two parameters ( the doubles ) go into registers. The
+ * remaining arguments are pushed onto the stack. Depending on where
+ * print_long_arg_list is called from, the size of the argument list 
+ * may force more space to be pushed onto the stack as part of the callers
+ * frame.
+ ****************************************************************/
+void print_long_arg_list ( a, b, c, d, e, f, struct1, struct2, struct3, 
+struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1,d2,d3,
+f1, f2, f3 )
+     double a;
+     double b;
+     int c;
+     int d;
+     int e;
+     int f;
+     struct small_rep_info_t  struct1;
+     struct small_rep_info_t  struct2;
+     struct small_rep_info_t  struct3;
+     struct small_rep_info_t  struct4;
+     struct bit_flags_t       flags;
+     struct bit_flags_combo_t flags_combo;
+     struct three_char_t      three_char;
+     struct five_char_t       five_char;
+     struct int_char_combo_t  int_char_combo;
+     struct one_double_t      d1;
+     struct one_double_t      d2;
+     struct one_double_t      d3;
+     struct two_floats_t      f1;
+     struct two_floats_t      f2;
+     struct two_floats_t      f3;
+
+{
+    printf("double : %f\n", a);
+    printf("double : %f\n", b);
+    printf("int : %d\n", c);
+    printf("int : %d\n", d);
+    printf("int : %d\n", e);
+    printf("int : %d\n", f);
+    print_small_structs( struct1, struct2, struct3, struct4, flags, flags_combo,
+			 three_char, five_char, int_char_combo, d1, d2, d3, 
+			 f1, f2, f3);
+}
+
+
+void print_one_large_struct( linked_list1 )
+     struct array_rep_info_t linked_list1;
+
+{
+
+ /* printf("Contents of linked list1: \n\n");
+  printf("Element Value | Index of Next Element\n");
+  printf("-------------------------------------\n");
+  printf("              |                      \n");*/
+  /*for (index = 0; index < 10; index++) {*/
+
+      printf("%10d%10d\n", linked_list1.values[0], 
+			   linked_list1.next_index[0]); 
+  /*}*/
+}
+
+/*****************************************************************
+ * PRINT_ARRAY_REP : 
+ * The three structure parameters should fit into registers. 
+ * IN struct array_rep_info_t linked_list1
+ * IN struct array_rep_info_t linked_list2
+ * IN struct array_rep_info_t linked_list3
+ ****************************************************************/
+void print_array_rep( linked_list1, linked_list2, linked_list3 )
+     struct array_rep_info_t linked_list1;
+     struct array_rep_info_t linked_list2;
+     struct array_rep_info_t linked_list3;
+
+{
+
+  int index;
+
+  printf("Contents of linked list1: \n\n");
+  printf("Element Value | Index of Next Element\n");
+  printf("-------------------------------------\n");
+  printf("              |                      \n");
+  for (index = 0; index < 10; index++) {
+
+      printf("%10d%10d\n", linked_list1.values[index], 
+			   linked_list1.next_index[index]); 
+  }
+
+  printf("Contents of linked list2: \n\n");
+  printf("Element Value | Index of Next Element\n");
+  printf("-------------------------------------\n");
+  printf("              |                      \n");
+  for (index = 0; index < 10; index++) {
+
+      printf("%10d%10d\n", linked_list2.values[index], 
+			   linked_list2.next_index[index]); 
+  }
+
+  printf("Contents of linked list3: \n\n");
+  printf("Element Value | Index of Next Element\n");
+  printf("-------------------------------------\n");
+  printf("              |                      \n");
+  for (index = 0; index < 10; index++) {
+
+      printf("%10d%10d\n", linked_list3.values[index], 
+			   linked_list3.next_index[index]); 
+  }
+
+}
+
+/*****************************************************************
+ * SUM_ARRAY_PRINT : 
+ * The last structure parameter must be pushed onto the stack 
+ * IN int    seed
+ * IN struct array_rep_info_t linked_list1
+ * IN struct array_rep_info_t linked_list2
+ * IN struct array_rep_info_t linked_list3
+ * IN struct array_rep_info_t linked_list4
+ ****************************************************************/
+void sum_array_print ( seed, linked_list1, linked_list2, linked_list3,linked_list4)
+     int seed;
+     struct array_rep_info_t linked_list1;
+     struct array_rep_info_t linked_list2;
+     struct array_rep_info_t linked_list3;
+     struct array_rep_info_t linked_list4;
+
+{
+     int index;
+     int sum;
+
+     printf("Sum of 4 arrays, by element (add in seed as well): \n\n");
+     printf("Seed: %d\n", seed);
+     printf("Element Index | Sum \n");
+     printf("-------------------------\n");
+     printf("              |          \n");
+
+     for (index = 0; index < 10; index++) {
+
+         sum = seed + linked_list1.values[index] + linked_list2.values[index] +
+	       linked_list3.values[index] + linked_list4.values[index];
+         printf("%10d%10d\n", index, sum);
+     }
+}
+
+/*****************************************************************
+ * INIT_ARRAY_REP : 
+ * IN struct array_rep_info_t *linked_list
+ * IN int    seed
+ ****************************************************************/
+void init_array_rep( linked_list, seed )
+     struct array_rep_info_t *linked_list;
+     int    seed;
+
+{
+
+  int index;
+
+  for (index = 0; index < 10; index++) {
+
+      linked_list->values[index] = (2*index) + (seed*2); 
+      linked_list->next_index[index] = index + 1;
+  }
+  linked_list->head = 0; 
+}
+
+
+int main ()  {
+
+  /* variables for array and enumerated type testing
+   */
+  char     char_array[121];
+  double   double_array[100];
+  float    float_array[15];
+  int      integer_array[50]; 
+  int      index;
+  id_int   student_id = 23;
+  colors   my_shirt = YELLOW;
+    
+  /* variables for large structure testing
+   */
+  int number = 10;
+  struct array_rep_info_t *list1;
+  struct array_rep_info_t *list2;
+  struct array_rep_info_t *list3;
+  struct array_rep_info_t *list4;
+
+  /* variables for testing a very long argument list
+   */
+   double                    a;
+   double                    b;
+   int                       c;
+   int                       d;
+   int                       e;
+   int                       f;
+
+  /* variables for testing a small structures and a very long argument list
+   */
+   struct small_rep_info_t  *struct1;
+   struct small_rep_info_t  *struct2;
+   struct small_rep_info_t  *struct3;
+   struct small_rep_info_t  *struct4;
+   struct bit_flags_t       *flags;
+   struct bit_flags_combo_t *flags_combo;
+   struct three_char_t      *three_char;
+   struct five_char_t       *five_char;
+   struct int_char_combo_t  *int_char_combo;
+   struct one_double_t      *d1;
+   struct one_double_t      *d2;
+   struct one_double_t      *d3;
+   struct two_floats_t      *f1;
+   struct two_floats_t      *f2;
+   struct two_floats_t      *f3;
+
+  /* Initialize arrays
+   */
+  for (index = 0; index < 120; index++) {
+      if ((index%2) == 0) char_array[index] = 'Z';
+	 else char_array[index] = 'a';
+  } /* call-ar-st.exp uses line numbers everywhere */ char_array[120] = '\0';
+
+  for (index = 0; index < 100; index++) {
+      double_array[index] = index*23.4567;
+  }
+
+  for (index = 0; index < 15; index++) {
+      float_array[index] = index/7.02;
+  }
+
+  for (index = 0; index < 50; index++) {
+      integer_array[index] = -index;
+  }
+
+  /* Print arrays
+   */
+  print_char_array(char_array);
+  print_double_array(double_array);
+  print_float_array(float_array);
+  print_student_id_shirt_color(student_id, my_shirt); 
+  print_int_array(integer_array);
+  print_all_arrays(integer_array, char_array, float_array, double_array);
+
+  /* Allocate space for large structures 
+   */
+  list1 = (struct array_rep_info_t *)malloc(sizeof(struct array_rep_info_t));
+  list2 = (struct array_rep_info_t *)malloc(sizeof(struct array_rep_info_t));
+  list3 = (struct array_rep_info_t *)malloc(sizeof(struct array_rep_info_t));
+  list4 = (struct array_rep_info_t *)malloc(sizeof(struct array_rep_info_t));
+
+  /* Initialize large structures 
+   */
+  init_array_rep(list1, 2);
+  init_array_rep(list2, 4);
+  init_array_rep(list3, 5);
+  init_array_rep(list4, 10);
+  printf("HELLO WORLD\n");
+  printf("BYE BYE FOR NOW\n");
+  printf("VERY GREEN GRASS\n");
+
+  /* Print large structures 
+   */
+  sum_array_print(10, *list1, *list2, *list3, *list4);
+  print_array_rep(*list1, *list2, *list3);
+  print_one_large_struct(*list1);
+
+  /* Allocate space for small structures 
+   */
+  struct1     = (struct small_rep_info_t  *)malloc(sizeof(struct small_rep_info_t));
+  struct2     = (struct small_rep_info_t  *)malloc(sizeof(struct small_rep_info_t));
+  struct3     = (struct small_rep_info_t  *)malloc(sizeof(struct small_rep_info_t));
+  struct4     = (struct small_rep_info_t  *)malloc(sizeof(struct small_rep_info_t));
+  flags       = (struct bit_flags_t *)malloc(sizeof(struct bit_flags_t));
+  flags_combo = (struct bit_flags_combo_t *)malloc(sizeof(struct bit_flags_combo_t));
+  three_char  = (struct three_char_t *)malloc(sizeof(struct three_char_t));
+  five_char   = (struct five_char_t *)malloc(sizeof(struct five_char_t));
+  int_char_combo = (struct int_char_combo_t *)malloc(sizeof(struct int_char_combo_t));
+
+  d1 = (struct one_double_t *)malloc(sizeof(struct one_double_t));
+  d2 = (struct one_double_t *)malloc(sizeof(struct one_double_t));
+  d3 = (struct one_double_t *)malloc(sizeof(struct one_double_t));
+
+  f1 = (struct two_floats_t *)malloc(sizeof(struct two_floats_t));
+  f2 = (struct two_floats_t *)malloc(sizeof(struct two_floats_t));
+  f3 = (struct two_floats_t *)malloc(sizeof(struct two_floats_t));
+
+  /* Initialize small structures 
+   */
+  init_small_structs ( struct1, struct2, struct3, struct4, flags, 
+		       flags_combo, three_char, five_char, int_char_combo,
+		       d1, d2, d3, f1, f2, f3);
+
+  /* Print small structures 
+   */
+  print_small_structs ( *struct1, *struct2, *struct3, *struct4, *flags, 
+			*flags_combo, *three_char, *five_char, *int_char_combo,
+			*d1, *d2, *d3, *f1, *f2, *f3);
+
+  /* Print a very long arg list 
+   */
+  a = 22.22;
+  b = 33.333;
+  c = 0;
+  d = -25;
+  e = 100;
+  f = 2345;
+
+  print_long_arg_list ( a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, 
+			*flags, *flags_combo, *three_char, *five_char, *int_char_combo,
+			*d1, *d2, *d3, *f1, *f2, *f3);
+
+  /* Initialize small structures 
+   */
+  init_one_double ( d1, 1.11111); 
+  init_one_double ( d2, -345.34); 
+  init_one_double ( d3, 546464.2); 
+  init_two_floats ( f1, 0.234, 453.1); 
+  init_two_floats ( f2, 78.345, 23.09); 
+  init_two_floats ( f3, -2.345, 1.0); 
+  init_bit_flags(flags, (unsigned)1, (unsigned)0, (unsigned)1, 
+		 (unsigned)0, (unsigned)1, (unsigned)0 ); 
+  init_bit_flags_combo(flags_combo, (unsigned)1, (unsigned)0, 'y',
+				     (unsigned)1, (unsigned)0, 'n',
+				     (unsigned)1, (unsigned)0 ); 
+  init_three_chars(three_char, 'x', 'y', 'z');
+  init_five_chars(five_char, 'h', 'e', 'l', 'l', 'o');
+  init_int_char_combo(int_char_combo, 13, '!');
+  init_struct_rep(struct1, 10);
+  init_struct_rep(struct2, 20);
+  init_struct_rep(struct3, 30);
+  init_struct_rep(struct4, 40);
+
+  compute_with_small_structs(35);
+  loop_count();
+  printf("HELLO WORLD\n");
+  printf("BYE BYE FOR NOW\n");
+  printf("VERY GREEN GRASS\n");
+
+  /* Print small structures 
+   */
+  print_one_double(*d1);
+  print_one_double(*d2);
+  print_one_double(*d3);
+  print_two_floats(*f1);
+  print_two_floats(*f2);
+  print_two_floats(*f3);
+  print_bit_flags(*flags);
+  print_bit_flags_combo(*flags_combo);
+  print_three_chars(*three_char);
+  print_five_chars(*five_char);
+  print_int_char_combo(*int_char_combo);
+  sum_struct_print(10, *struct1, *struct2, *struct3, *struct4);
+  print_struct_rep(*struct1, *struct2, *struct3);
+
+  return 0;
+}
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp
new file mode 100644
index 0000000..d8ed4fe
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-ar-st.exp
@@ -0,0 +1,451 @@
+#   Copyright (C) 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "call-ar-st"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# The a29k can't call functions, so don't even bother with this test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    send_gdb "set language c\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language c (timeout)" ; return 0; }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"c\".*$gdb_prompt $" {
+	    pass "set language to \"c\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"c\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+
+source ${binfile}.ci
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#go -until 1007
+gdb_test "tbreak 1007" \
+    "Breakpoint \[0-9\]+.*file.*$srcfile, line 1007.*" \
+    "tbreakpoint line 1007"
+
+gdb_test continue \
+"Continuing\\..*main \\(\\) at.*$srcfile:1007.*" \
+"run until breakpoint set at a line"
+
+
+#call print_double_array(double_array)
+send_gdb "print print_double_array(double_array)\n"
+gdb_expect {
+    -re "array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.417500  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300\[ \t\r\n\]+\[ \t\r\n\]+.*$gdb_prompt $" {
+        pass "print print_double_array(double_array)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_double_array(double_array)" }
+    timeout           { fail "(timeout) print print_double_array(double_array)" }
+  }
+
+
+#call print_char_array(char_array)
+send_gdb "print print_char_array(char_array)\n"
+gdb_expect {
+    -re "array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+.*\[ \t\r\n\]+.*$gdb_prompt $" {
+        pass "print print_char_array(char_array)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_char_array(char_array)" }
+    timeout           { fail "(timeout) print print_char_array(char_array)" }
+  }
+
+
+
+#go -until 1014
+gdb_test "tbreak 1014" \
+"Breakpoint.*file.*$srcfile, line 1014.*" \
+"tbreakpoint line 1014"
+
+send_gdb "continue\n"
+gdb_expect {
+    -re "array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+\[ \t\r\n\]+main.*at.*$srcfile:1014\[ \t\r\n\]+.*print_double_array\\(double_array\\).*$gdb_prompt $" {
+        pass "continue to 1014"
+      }
+    -re ".*$gdb_prompt $" { fail "continue to 1014" }
+    timeout           { fail "(timeout) continue to 1014" }
+}
+
+# I am disabling this test, because it takes too long. I verified by
+# hand that it works, feel free to check for yourself. 
+#call print_all_arrays(integer_array, char_array, float_array, double_array)
+#send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n"
+#gdb_expect {
+#    -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1  -2  -3  -4  -5  -6  -7  -8\[ \t\r\n\]+-9  -10  -11  -12  -13  -14  -15  -16\[ \t\r\n\]+-17  -18  -19  -20  -21  -22  -23  -24\[ \t\r\n\]+-25  -26  -27  -28  -29  -30  -31  -32\[ \t\r\n\]+-33  -34  -35  -36  -37  -38  -39  -40\[ \t\r\n\]+-41  -42  -43  -44  -45  -46  -47  -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450  0.284900  0.427350  0.569801  0.712251  0.854701  0.997151  1.139601\[ \t\r\n\]+1.282051  1.424501  1.566952  1.709402  1.851852  1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.41750  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300.*$gdb_prompt $" {
+#        pass "print print_all_arrays(integer_array, char_array, float_array, double_array)"
+#   }
+#    -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" }
+#    timeout           { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" }
+#  }
+
+#set timeout $oldtimeout
+#go -until 1018
+gdb_test "tbreak 1018" \
+    "Breakpoint.* file .*$srcfile, line 1018.*" \
+    "tbreakpoint line 1018"
+
+gdb_test continue \
+"Continuing\\..*array_d :.*array_f :.*student id :\[\t \]+.*YELLOW.*array_i :.*main \\(\\) at .*call-ar-st.c:1018\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." \
+"continuing to breakpoint 1018"
+
+#step
+    send_gdb "step\n"
+    gdb_expect {
+        -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:287\[ \t\r\n\]+287.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
+        -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
+        timeout { fail "step inside print_all_arrays (timeout)" }
+    }
+
+
+#step -over
+    send_gdb "next\n"
+    gdb_expect {
+        -re "array_i :.*288.*print_char_array\\(array_c\\);.*$gdb_prompt $" {pass "next over print_int_array in print-all_arrays"}
+        -re ".*$gdb_prompt $" { fail "next over print_int_array in print-all_arrays" }
+        timeout { fail "next over print_int_array in print-all_arrays (timeout)" }
+    }
+
+
+
+#call print_double_array(array_d)
+send_gdb "print print_double_array(array_d)\n"
+gdb_expect {
+    -re "array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700  46.913400  70.370100  93.826800  117.283500  140.740200  164.196900  187.653600\[ \t\r\n\]+211.110300  234.567000  258.023700  281.480400  304.937100  328.393800  351.850500  375.307200\[ \t\r\n\]+398.763900  422.220600  445.677300  469.134000  492.590700  516.047400  539.504100  562.960800\[ \t\r\n\]+586.417500  609.874200  633.330900  656.787600  680.244300  703.701000  727.157700  750.614400\[ \t\r\n\]+774.071100  797.527800  820.984500  844.441200  867.897900  891.354600  914.811300  938.268000\[ \t\r\n\]+961.724700  985.181400  1008.638100  1032.094800  1055.551500  1079.008200  1102.464900  1125.921600\[ \t\r\n\]+1149.378300  1172.835000  1196.291700  1219.748400  1243.205100  1266.661800  1290.118500  1313.575200\[ \t\r\n\]+1337.031900  1360.488600  1383.945300  1407.402000  1430.858700  1454.315400  1477.772100  1501.228800\[ \t\r\n\]+1524.685500  1548.142200  1571.598900  1595.055600  1618.512300  1641.969000  1665.425700  1688.882400\[ \t\r\n\]+1712.339100  1735.795800  1759.252500  1782.709200  1806.165900  1829.622600  1853.079300  1876.536000\[ \t\r\n\]+1899.992700  1923.449400  1946.906100  1970.362800  1993.819500  2017.276200  2040.732900  2064.189600\[ \t\r\n\]+2087.646300  2111.103000  2134.559700  2158.016400  2181.473100  2204.929800  2228.386500  2251.843200\[ \t\r\n\]+2275.299900  2298.756600  2322.213300\[ \t\r\n\]+\[ \t\r\n\]+.*$gdb_prompt $" {
+        pass "print print_double_array(array_d)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_double_array(array_d)" }
+    timeout           { fail "(timeout) print print_double_array(array_d)" }
+  }
+
+
+#go -until 1034
+gdb_test "tbreak 1034" \
+"Breakpoint.* file .*$srcfile, line 1034.*" \
+"tbreakpoint line 1034"
+
+gdb_test continue "Continuing\\..*array_c.*array_f.*array_d.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1034.*printf\\(.BYE BYE FOR NOW.n.\\)." "continuing to 1034"
+
+
+#call sum_array_print(10, *list1, *list2, *list3, *list4)
+send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
+gdb_expect {
+    -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
+        pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
+      }
+    -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
+    timeout           { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
+  }
+
+
+#step -over
+    send_gdb "next\n"
+    gdb_expect {
+        -re "BYE BYE FOR NOW\[ \t\r\n\]+1035\[ \t\r\n\]+printf\\(.VERY GREEN GRASS.n.\\);\[ \t\r\n\]+.*$gdb_prompt $" { pass "next to 1035"}
+        -re ".*$gdb_prompt $" { fail "next to 1035" }
+        timeout { fail "next to 1035(timeout)" }
+    }
+
+#call print_array_rep(\*list1, \*list2, \*list3)
+
+send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
+gdb_expect {
+    -re ".*.*$gdb_prompt $" {
+        pass "print print_array_rep(*list1, *list2, *list3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_array_rep(*list1, *list2, *list3)" }
+    timeout           { fail "(timeout) print print_array_rep(*list1, *list2, *list3)"# }
+  }
+
+
+
+#go -until 1039
+gdb_test "tbreak 1039" \
+    "Breakpoint..* file .*$srcfile, line 1039.*" \
+    "tbreakpoint line 1039"
+
+send_gdb  "continue\n"
+gdb_expect {
+ -re ".*main \\(\\) at .*call-ar-st.c:1039\r\n1039\t\[ \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" {
+                   pass "continue to 1039"}
+ -re ".*$gdb_prompt $" { fail "continue to 1039"}
+ timeout           { fail "(timeout) continue to 1039"}
+}
+
+
+
+# Run into sum_array_print, and verify that the arguments were passed
+# accurately.
+#
+# Note that we shouldn't use a `step' here to get into
+# sum_array_print; GCC may emit calls to memcpy to put the arguments
+# in the right place, and a step may end up in memcpy instead.  This
+# may itself be a bug, but it's not the one we're trying to catch
+# here.  I've added something to step-test.exp for this.
+gdb_test "break sum_array_print" \
+	".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
+	"set breakpoint in sum_array_print"
+gdb_test "continue" \
+	".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:909\[ \t\n\r\]+909.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
+	"check args of sum_array_print"
+
+#call print_array_rep(linked_list1, linked_list2, linked_list3)
+# this calls works from gdb without gdb_expect. But it does seem to hang
+#from within gdb_expect.
+#I comment this out
+#send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n"
+#gdb_expect {
+#    -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" {
+#        pass "print print_array_rep(linked_list1, linked_list2, linked_list3)"
+#      }
+#    -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" }
+#    timeout           { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" }
+#}
+
+
+#go -until 1079
+gdb_test "tbreak 1079" \
+    "Breakpoint.* file .*call-ar-st.c, line 1079.*" \
+    "tbreakpoint line 1079"
+
+send_gdb "continue\n"
+gdb_expect {
+ -re  "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1079.*c = 0.*$gdb_prompt $" {
+                 pass "continue to 1079"}
+      -re ".*$gdb_prompt $" { fail "continue to 1079"}           
+      timeout           { fail "(timeout) continue to 1079"}
+}
+
+#call print_small_structs(*struct1, *struct2, *struct3, *struct4,*flags, *flags_combo,
+#*three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
+send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
+gdb_expect {
+    -re ".*alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+ch1: y\tch2: n\[\t\r\n \]+Contents of three_char_t:\[\t\r\n \]+a\tb\tc\[\t\r\n \]+Contents of five_char_t:\[\t\r\n \]+l\tm\tn\to\tp\[\t\r\n \]+Contents of int_char_combo_t:\[\t\r\n \]+123.*z\[\t\r\n \]+Sum of the 4 struct values and seed :\[\t\r\n \]+52\[\t\r\n \]+Contents of struct1:\[\t\r\n \]+6.*0\[\t\r\n \]+Contents of struct2:\[\t\r\n \]+10.*0\[\t\r\n \]+Contents of struct3:\[\t\r\n \]+12.*0\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+10.500000\[\t\r\n \]+Contents of one_double_t:.*-3.340000\[\t\r\n \]+Contents of one_double_t:.*675.091230\[\t\r\n \]+Contents of two_floats_t:.*45.234001.*43.599998\[\t\r\n \]+Contents of two_floats_t:.*78.010002.*122.099998\[\t\r\n \]+Contents of two_floats_t:.*-1232.344971.*-199.210007\[\t\r\n \]+.*$gdb_prompt $" {
+        pass "print print_small_structs"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_small_structs" }
+    timeout           { fail "(timeout) print_small_structs" }
+  }
+
+
+#call compute_with_small_structs(20)
+send_gdb "print compute_with_small_structs(20)\n"
+gdb_expect {
+    -re ".*\[0-9\]+ =.*$gdb_prompt $" {
+        pass "print compute_with_small_structs(20)"
+      }
+    -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" }
+    timeout           { fail "(timeout) compute_with_small_structs(20)" }
+  }
+
+
+#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)
+send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
+gdb_expect {
+    -re ".*Two Doubles : 123.456000.*123.456000\[\t\r\n \]+Two Doubles : -0.120000.*-1.230000\[\t\r\n \]+Two Doubles : 343434.800000.*89.098000\[\t\r\n \]+Two Doubles : 3.140000.*-5678.123450\[\t\r\n \]+Two Doubles : -0.111111.*216.970650\[\t\r\n \]+.*$gdb_prompt $" {
+        pass "print print_ten_doubles"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_ten_doubles" }
+    timeout           { fail "(timeout) print_ten_doubles" }
+  }
+
+#go -until 1084
+gdb_test "tbreak 1084" \
+    "Breakpoint .* file .*call-ar-st.c, line 1084.*" \
+    "tbreakpoint line 1084"
+
+gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1084\[\t\r\n \]+1084.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1084"
+
+  
+    send_gdb "step\n"
+    gdb_expect {
+        -re ".*print_long_arg_list \\(a=22.219999999999999, b=33.332999999999998, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.3399999999999999\}, d3=\{double1 = 675.09123\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at ${srcdir}/${subdir}/${srcfile}:813\[\r\n\]+813\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"}
+        -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
+        timeout { fail "step into print_long_arg_list (timeout)" }
+    }
+
+
+#call print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)
+send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n"
+gdb_expect {
+    -re ".*alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+ch1: y\tch2: n\[\t\r\n \]+Contents of three_char_t:\[\t\r\n \]+a\tb\tc\[\t\r\n \]+Contents of five_char_t:\[\t\r\n \]+l\tm\tn\to\tp\[\t\r\n \]+Contents of int_char_combo_t:\[\t\r\n \]+123.*z\[\t\r\n \]+Sum of the 4 struct values and seed :\[\t\r\n \]+52\[\t\r\n \]+Contents of struct1:\[\t\r\n \]+6.*0\[\t\r\n \]+Contents of struct2:\[\t\r\n \]+10.*0\[\t\r\n \]+Contents of struct3:\[\t\r\n \]+12.*0\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+10.500000\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+-3.340000\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+675.091230\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+45.234001.*43.599998\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+78.010002.*122.099998\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+-1232.344971.*-199.210007\[\t\r\n \]+.*$gdb_prompt $" {
+        pass "print print_small_structs from print_long_arg_list "
+      }
+    -re ".*$gdb_prompt $" { fail "print print_small_structs from print_long_arg_list" }
+    timeout           { fail "(timeout) print_small_structs from print_long_arg_list" }
+  }
+
+
+
+#go -until 1098
+gdb_test "tbreak 1098" \
+    "Breakpoint.* file .*call-ar-st.c, line 1098.*" \
+    "tbreakpoint line 1098"
+
+gdb_test continue "Continuing\\..*Contents of two_floats_t:.*-1232.344971.*-199.210007.*main \\(\\) at.*call-ar-st.c:1098.*1098.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
+"continue to 1098"
+
+
+#step
+    send_gdb "step\n"
+    gdb_expect {
+        -re "
+init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:385\[ \t\n\r\]+385.*bit_flags_combo->alpha = a;.*$gdb_prompt $" {
+                            pass "step into init_bit_flags_combo"}
+        -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" }
+        timeout { fail "step into init_bit_flags_combo (timeout)" }
+    }
+
+#call print_bit_flags_combo(*bit_flags_combo)
+send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
+gdb_expect {
+    -re ".*alpha.*gamma.*epsilon.*ch1: y\tch2: n.*$gdb_prompt $" {
+        pass "print print_bit_flags_combo from init_bit_flags_combo"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_bit_flags_combo from init_bit_flags_combo" }
+    timeout           { fail "(timeout) print_bit_flags_combo from init_bit_flags_combo" }
+  }
+
+
+#go -until 1103
+gdb_test "tbreak 1103" \
+    "Breakpoint.* file .*call-ar-st.c, line 1103.*" \
+    "tbreakpoint line 1103"
+
+gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1103\[\r\n\t \]+1103.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
+"continue to 1103"
+
+#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
+send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
+gdb_expect {
+    -re ".*double : 22.220000.*double : 33.333000.*int : 0.*int : -25.*int : 100.*int : 2345.*alpha.*gamma.*epsilon.*ch1: y\tch2: n.*Contents of three_char_t:.*x\ty\tz.*Contents of five_char_t:.*h\te\tl\tl\to.*Contents of int_char_combo_t:.*123\tz.*Sum of the 4 struct values and seed :.*52.*Contents of struct1:.*6\[ \]+0.*Contents of struct2:.*10\[ \]+0.*Contents of struct3:.*12.*0.*Contents of one_double_t:\[ \n\r\t\]+1.111110\[ \n\r\t\]+Contents of one_double_t:\[ \n\r\t\]+-345.340000\[ \n\r\t\]+Contents of one_double_t:\[ \n\r\t\]+546464.200000\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+0.234000\t453.100006\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+78.345001\t23.090000\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+-2.345000\t1.000000.*$gdb_prompt $" {
+        pass "print print_long_arg_list"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_long_arg_list" }
+    timeout           { fail "(timeout) print_long_arg_list" }
+  }
+
+
+#go -until 1109
+gdb_test "tbreak 1109" \
+    "Breakpoint.* file .*call-ar-st.c, line 1109.*" \
+    "tbreakpoint line 1109"
+
+gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1109\[ \t\n\r\]+1109.*compute_with_small_structs\\(35\\);" \
+"continue to 1109"
+
+
+#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
+send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
+gdb_expect {
+    -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
+        pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
+      }
+    -re ".*$gdb_prompt $" { fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
+    timeout           { fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
+  }
+
+
+#call print_struct_rep(*struct1, *struct2, *struct3)
+send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
+gdb_expect {
+    -re ".*Contents of struct1:\[ \t\n\r\]+        22         0\[ \t\n\r\]+Contents of struct2:\[ \t\n\r\]+        42         0\[ \t\n\r\]+Contents of struct3:\[ \t\n\r\]+        62         0\[ \t\n\r\]+.*$gdb_prompt $" {
+        pass "print print_struct_rep(*struct1, *struct2, *struct3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_struct_rep(*struct1, *struct2, *struct3)" }
+    timeout           { fail "(timeout) print_struct_rep(*struct1, *struct2, *struct3)" }
+  }
+
+send_gdb "print print_one_large_struct(*list1)\n"
+gdb_expect {
+    -re ".*         4         1.*$gdb_prompt $" {
+        pass "print print_one_large_struct(*list1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_one_large_struct(*list1)" }
+    timeout           { fail "(timeout) print_one_large_struct(*list1)" }
+  }
+
+return
+
+~
diff --git a/gdb/testsuite/gdb.base/call-rt-st.c b/gdb/testsuite/gdb.base/call-rt-st.c
new file mode 100644
index 0000000..ad40a70
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-rt-st.c
@@ -0,0 +1,530 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/**************************************************************************
+ * TESTS :
+ * function returning large structures, which go on the stack
+ * functions returning varied sized structs which go on in the registers.
+ ***************************************************************************/
+
+
+/* A large structure (> 64 bits) used to test passing large structures as
+ * parameters
+ */
+
+struct array_rep_info_t {
+   int   next_index[10]; 
+   int   values[10];
+   int   head;
+};
+
+/*****************************************************************************
+ * Small structures ( <= 64 bits). These are used to test passing small 
+ * structures as parameters and test argument size promotion.
+ *****************************************************************************/
+
+ /* 64 bits
+  */
+struct small_rep_info_t {
+   int   value;
+   int   head;
+};
+
+/* 6 bits : really fits in 8 bits and is promoted to 32 bits
+ */
+struct bit_flags_t {
+       unsigned alpha   :1;
+       unsigned beta    :1;
+       unsigned gamma   :1;
+       unsigned delta   :1;
+       unsigned epsilon :1;
+       unsigned omega   :1;
+};
+
+/* 22 bits : really fits in 40 bits and is promoted to 64 bits
+ */
+struct bit_flags_combo_t {
+       unsigned alpha   :1;
+       unsigned beta    :1;
+       char     ch1;
+       unsigned gamma   :1;
+       unsigned delta   :1;
+       char     ch2;
+       unsigned epsilon :1;
+       unsigned omega   :1;
+};
+
+/* 64 bits
+ */
+struct one_double_t {
+       double double1;
+};
+
+/* 64 bits
+ */
+struct two_floats_t {
+       float float1;
+       float float2;
+};
+
+
+/* 24 bits : promoted to 32 bits
+ */
+struct three_char_t {
+       char ch1;
+       char ch2;
+       char ch3;
+};
+
+/* 40 bits : promoted to 64 bits
+ */
+struct five_char_t {
+       char ch1;
+       char ch2;
+       char ch3;
+       char ch4;
+       char ch5;
+};
+
+/* 40 bits : promoted to 64 bits
+ */
+struct int_char_combo_t {
+       int  int1;
+       char ch1;
+};
+
+
+/*****************************************************************
+ * LOOP_COUNT : 
+ * A do nothing function. Used to provide a point at which calls can be made.  
+ *****************************************************************/
+void loop_count () {
+
+     int index;
+
+     for (index=0; index<4; index++);
+}
+
+/*****************************************************************
+ * INIT_BIT_FLAGS :
+ * Initializes a bit_flags_t structure. Can call this function see
+ * the call command behavior when integer arguments do not fit into
+ * registers and must be placed on the stack.
+ * OUT struct bit_flags_t *bit_flags -- structure to be filled
+ * IN  unsigned a  -- 0 or 1 
+ * IN  unsigned b  -- 0 or 1 
+ * IN  unsigned g  -- 0 or 1 
+ * IN  unsigned d  -- 0 or 1 
+ * IN  unsigned e  -- 0 or 1 
+ * IN  unsigned o  -- 0 or 1 
+ *****************************************************************/
+void init_bit_flags (bit_flags,a,b,g,d,e,o) 
+struct bit_flags_t *bit_flags;
+unsigned a;
+unsigned b;
+unsigned g;
+unsigned d;
+unsigned e;
+unsigned o; 
+{
+
+   bit_flags->alpha = a;
+   bit_flags->beta = b;
+   bit_flags->gamma = g;
+   bit_flags->delta = d;
+   bit_flags->epsilon = e;
+   bit_flags->omega = o;
+}
+
+/*****************************************************************
+ * INIT_BIT_FLAGS_COMBO :
+ * Initializes a bit_flags_combo_t structure. Can call this function
+ * to see the call command behavior when integer and character arguments
+ * do not fit into registers and must be placed on the stack.
+ * OUT struct bit_flags_combo_t *bit_flags_combo -- structure to fill
+ * IN  unsigned a  -- 0 or 1 
+ * IN  unsigned b  -- 0 or 1 
+ * IN  char     ch1
+ * IN  unsigned g  -- 0 or 1 
+ * IN  unsigned d  -- 0 or 1 
+ * IN  char     ch2
+ * IN  unsigned e  -- 0 or 1 
+ * IN  unsigned o  -- 0 or 1 
+ *****************************************************************/
+void init_bit_flags_combo (bit_flags_combo, a, b, ch1, g, d, ch2, e, o)
+struct bit_flags_combo_t *bit_flags_combo;
+unsigned a;
+unsigned b;
+char ch1;
+unsigned g;
+unsigned d;
+char ch2;
+unsigned e;
+unsigned o;
+{
+
+   bit_flags_combo->alpha = a;
+   bit_flags_combo->beta = b;
+   bit_flags_combo->ch1 = ch1;
+   bit_flags_combo->gamma = g;
+   bit_flags_combo->delta = d;
+   bit_flags_combo->ch2 = ch2;
+   bit_flags_combo->epsilon = e;
+   bit_flags_combo->omega = o;
+}
+
+
+/*****************************************************************
+ * INIT_ONE_DOUBLE : 
+ * OUT  struct one_double_t *one_double  -- structure to fill 
+ * IN   double init_val
+ *****************************************************************/
+void init_one_double (one_double, init_val)
+struct one_double_t *one_double; 
+double init_val;
+{
+
+     one_double->double1  = init_val;
+}
+
+/*****************************************************************
+ * INIT_TWO_FLOATS : 
+ * OUT struct two_floats_t *two_floats -- structure to be filled
+ * IN  float init_val1 
+ * IN  float init_val2 
+ *****************************************************************/
+void init_two_floats (two_floats, init_val1, init_val2)
+struct two_floats_t *two_floats;
+float init_val1;
+float init_val2;
+{
+
+     two_floats->float1 = init_val1;
+     two_floats->float2 = init_val2;
+}
+
+/*****************************************************************
+ * INIT_THREE_CHARS : 
+ * OUT struct three_char_t *three_char -- structure to be filled
+ * IN  char init_val1 
+ * IN  char init_val2 
+ * IN  char init_val3 
+ *****************************************************************/
+void init_three_chars ( three_char, init_val1, init_val2, init_val3)
+struct three_char_t *three_char;
+char init_val1;
+char init_val2;
+char init_val3;
+{
+
+     three_char->ch1 = init_val1;
+     three_char->ch2 = init_val2;
+     three_char->ch3 = init_val3;
+}
+
+/*****************************************************************
+ * INIT_FIVE_CHARS : 
+ * OUT struct five_char_t *five_char -- structure to be filled
+ * IN  char init_val1 
+ * IN  char init_val2 
+ * IN  char init_val3 
+ * IN  char init_val4 
+ * IN  char init_val5 
+ *****************************************************************/
+void init_five_chars ( five_char, init_val1, init_val2, init_val3, init_val4, init_val5)
+struct five_char_t *five_char;
+char init_val1;
+char init_val2;
+char init_val3;
+char init_val4;
+char init_val5;
+{
+
+     five_char->ch1 = init_val1;
+     five_char->ch2 = init_val2;
+     five_char->ch3 = init_val3;
+     five_char->ch4 = init_val4;
+     five_char->ch5 = init_val5;
+}
+
+/*****************************************************************
+ * INIT_INT_CHAR_COMBO : 
+ * OUT struct int_char_combo_t *combo -- structure to be filled
+ * IN  int  init_val1 
+ * IN  char init_val2 
+ *****************************************************************/
+void init_int_char_combo ( combo, init_val1, init_val2)
+struct int_char_combo_t *combo;
+int init_val1;
+char init_val2;
+{
+
+     combo->int1 = init_val1;
+     combo->ch1 = init_val2;
+}
+
+/*****************************************************************
+ * INIT_STRUCT_REP : 
+ * OUT struct small_rep_into_t *small_struct -- structure to be filled
+ * IN  int  seed 
+ *****************************************************************/
+void init_struct_rep( small_struct, seed)
+struct small_rep_info_t *small_struct;
+int    seed;
+
+{
+
+      small_struct->value = 2 + (seed*2); 
+      small_struct->head = 0; 
+}
+
+/*****************************************************************
+ * PRINT_BIT_FLAGS : 
+ * IN struct bit_flags_t bit_flags 
+ ****************************************************************/
+struct bit_flags_t print_bit_flags ( bit_flags)
+struct bit_flags_t bit_flags;
+{
+
+     if (bit_flags.alpha) printf("alpha\n");
+     if (bit_flags.beta) printf("beta\n");
+     if (bit_flags.gamma) printf("gamma\n");
+     if (bit_flags.delta) printf("delta\n");
+     if (bit_flags.epsilon) printf("epsilon\n");
+     if (bit_flags.omega) printf("omega\n");
+     return bit_flags;
+     
+}
+
+/*****************************************************************
+ * PRINT_BIT_FLAGS_COMBO : 
+ * IN struct bit_flags_combo_t bit_flags_combo 
+ ****************************************************************/
+struct bit_flags_combo_t print_bit_flags_combo ( bit_flags_combo )
+struct bit_flags_combo_t bit_flags_combo;
+{
+
+     if (bit_flags_combo.alpha) printf("alpha\n");
+     if (bit_flags_combo.beta) printf("beta\n");
+     if (bit_flags_combo.gamma) printf("gamma\n");
+     if (bit_flags_combo.delta) printf("delta\n");
+     if (bit_flags_combo.epsilon) printf("epsilon\n");
+     if (bit_flags_combo.omega) printf("omega\n");
+     printf("ch1: %c\tch2: %c\n", bit_flags_combo.ch1, bit_flags_combo.ch2);
+     return bit_flags_combo;
+     
+}
+
+/*****************************************************************
+ * PRINT_ONE_DOUBLE : 
+ * IN struct one_double_t one_double 
+ ****************************************************************/
+struct one_double_t print_one_double ( one_double )
+struct one_double_t one_double;
+{
+
+     printf("Contents of one_double_t: \n\n");
+     printf("%f\n", one_double.double1);
+     return one_double;
+     
+}
+
+/*****************************************************************
+ * PRINT_TWO_FLOATS : 
+ * IN struct two_floats_t two_floats 
+ ****************************************************************/
+struct two_floats_t print_two_floats ( two_floats ) 
+struct two_floats_t two_floats;
+{
+
+     printf("Contents of two_floats_t: \n\n");
+     printf("%f\t%f\n", two_floats.float1, two_floats.float2);
+     return two_floats;
+     
+}
+
+/*****************************************************************
+ * PRINT_THREE_CHARS : 
+ * IN struct three_char_t three_char
+ ****************************************************************/
+struct three_char_t print_three_chars ( three_char ) 
+struct three_char_t three_char;
+{
+
+     printf("Contents of three_char_t: \n\n");
+     printf("%c\t%c\t%c\n", three_char.ch1, three_char.ch2, three_char.ch3);
+     return three_char;
+     
+}
+
+/*****************************************************************
+ * PRINT_FIVE_CHARS : 
+ * IN struct five_char_t five_char
+ ****************************************************************/
+struct five_char_t print_five_chars ( five_char )
+struct five_char_t five_char;
+{
+
+     printf("Contents of five_char_t: \n\n");
+     printf("%c\t%c\t%c\t%c\t%c\n", five_char.ch1, five_char.ch2, 
+				    five_char.ch3, five_char.ch4, 
+				    five_char.ch5);
+     return five_char;
+     
+}
+
+/*****************************************************************
+ * PRINT_INT_CHAR_COMBO : 
+ * IN struct int_char_combo_t int_char_combo
+ ****************************************************************/
+struct int_char_combo_t print_int_char_combo ( int_char_combo )
+struct int_char_combo_t int_char_combo;
+{
+
+     printf("Contents of int_char_combo_t: \n\n");
+     printf("%d\t%c\n", int_char_combo.int1, int_char_combo.ch1);
+     return int_char_combo;
+     
+}     
+
+/*****************************************************************
+ * PRINT_STRUCT_REP : 
+ ****************************************************************/
+struct small_rep_info_t print_struct_rep( struct1 )
+struct small_rep_info_t struct1;
+
+{
+
+  printf("Contents of struct1: \n\n");
+  printf("%10d%10d\n", struct1.value, struct1.head); 
+  struct1.value =+5;
+  
+  return struct1;
+  
+
+}
+
+
+struct array_rep_info_t print_one_large_struct( linked_list1 )
+struct array_rep_info_t linked_list1;
+{
+
+
+      printf("%10d%10d\n", linked_list1.values[0], 
+			   linked_list1.next_index[0]); 
+ 
+      return linked_list1;
+      
+}
+
+/*****************************************************************
+ * INIT_ARRAY_REP :
+ * IN struct array_rep_info_t *linked_list
+ * IN int    seed
+ ****************************************************************/
+void init_array_rep( linked_list, seed )
+struct array_rep_info_t *linked_list;
+int    seed;
+
+{
+
+  int index;
+
+  for (index = 0; index < 10; index++) {
+
+      linked_list->values[index] = (2*index) + (seed*2);
+      linked_list->next_index[index] = index + 1;
+  }
+  linked_list->head = 0;
+}
+
+
+int main ()  {
+   
+  /* variables for large structure testing
+   */
+  int number = 10;
+  struct array_rep_info_t *list1;
+
+  /* variables for testing a small structures and a very long argument list
+   */
+   struct small_rep_info_t  *struct1;
+   struct bit_flags_t       *flags;
+   struct bit_flags_combo_t *flags_combo;
+   struct three_char_t      *three_char;
+   struct five_char_t       *five_char;
+   struct int_char_combo_t  *int_char_combo;
+   struct one_double_t      *d1;
+   struct two_floats_t      *f3;
+
+
+  /* Allocate space for large structures 
+   */
+  list1 = (struct array_rep_info_t *)malloc(sizeof(struct array_rep_info_t));
+
+  /* Initialize large structures 
+   */
+  init_array_rep(list1, 2);
+
+  /* Print large structures 
+   */
+  print_one_large_struct(*list1);
+
+  /* Allocate space for small structures 
+   */
+  struct1     = (struct small_rep_info_t  *)malloc(sizeof(struct small_rep_info_t));
+  flags       = (struct bit_flags_t *)malloc(sizeof(struct bit_flags_t));
+  flags_combo = (struct bit_flags_combo_t *)malloc(sizeof(struct bit_flags_combo_t));
+  three_char  = (struct three_char_t *)malloc(sizeof(struct three_char_t));
+  five_char   = (struct five_char_t *)malloc(sizeof(struct five_char_t));
+  int_char_combo = (struct int_char_combo_t *)malloc(sizeof(struct int_char_combo_t));
+
+  d1 = (struct one_double_t *)malloc(sizeof(struct one_double_t));
+  f3 = (struct two_floats_t *)malloc(sizeof(struct two_floats_t));
+
+  /* Initialize small structures 
+   */
+  init_one_double ( d1, 1.11111); 
+  init_two_floats ( f3, -2.345, 1.0); 
+  init_bit_flags(flags, (unsigned)1, (unsigned)0, (unsigned)1, 
+		 (unsigned)0, (unsigned)1, (unsigned)0 ); 
+  init_bit_flags_combo(flags_combo, (unsigned)1, (unsigned)0, 'y',
+				     (unsigned)1, (unsigned)0, 'n',
+				     (unsigned)1, (unsigned)0 ); 
+  init_three_chars(three_char, 'x', 'y', 'z');
+  init_five_chars(five_char, 'h', 'e', 'l', 'l', 'o');
+  init_int_char_combo(int_char_combo, 13, '!');
+  init_struct_rep(struct1, 10);
+ 
+ 
+  /* Print small structures 
+   */
+  print_one_double(*d1);
+  print_two_floats(*f3);
+  print_bit_flags(*flags);
+  print_bit_flags_combo(*flags_combo);
+  print_three_chars(*three_char);
+  print_five_chars(*five_char);
+  print_int_char_combo(*int_char_combo);
+  print_struct_rep(*struct1);
+
+  loop_count();
+
+  return 0;
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/call-rt-st.exp b/gdb/testsuite/gdb.base/call-rt-st.exp
new file mode 100644
index 0000000..12ca14c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-rt-st.exp
@@ -0,0 +1,230 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# this file tests command line calls with functions returning structures
+# corresponding source file: call_return_struct.c
+
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "call-rt-st"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# The a29k can't call functions, so don't even bother with this test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    send_gdb "set language c\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language c (timeout)" ; return 0; }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"c\".*$gdb_prompt $" {
+	    pass "set language to \"c\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"c\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+
+
+source ${binfile}.ci
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+
+gdb_test "break loop_count" \
+    "Breakpoint.* file .*call-rt-st.c, line 106\\." \
+    "breakpoint loop_count"
+
+
+send_gdb "continue\n"
+gdb_expect {
+ -re  "Continuing\\..*Breakpoint.*loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+106\[\t \]+for \\(index=0; index.4; index..\\);\[\r\n \]+$gdb_prompt $" {
+                 pass "continue to loop_count"}
+      -re ".*$gdb_prompt $" { fail "continue to loop_count"}           
+      timeout           { fail "(timeout) continue to loop_count"}
+}
+
+send_gdb "finish\n"
+gdb_expect {
+ -re  "Run till exit from .0  loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:514\[ \t\r\n\]+514\[\t \]+return 0;.*$gdb_prompt $" {
+                 pass "finish out from  loop_count"}
+      -re ".*$gdb_prompt $" { fail "finish out from loop_count"}           
+      timeout           { fail "(timeout)finish out from loop_count"}
+}
+
+
+send_gdb "print print_struct_rep(*struct1)\n"
+gdb_expect {
+    -re ".*Contents of struct1:\[ \t\n\r\]+22\[ \t\]+0\[ \t\n\r\]+.\[0-9\]+ = \{value = 5, head = 0\}.*$gdb_prompt $" {
+        pass "print print_struct_rep(*struct1, *struct2, *struct3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_struct_rep(*struct1, *struct2, *struct3)" }
+    timeout           { fail "(timeout) print_struct_rep(*struct1, *struct2, *struct3)" }
+  }
+
+send_gdb "print print_one_large_struct(*list1)\n"
+gdb_expect {
+    -re ".*\[ \t\]+4\[ \t\]+1\[ \r\n\]+.\[0-9\]+ = \{next_index = \{1, 2, 3, 4, 5, 6, 7, 8, 9, 10\}, values = \{4, 6, 8, 10, 12, 14, 16, 18, 20, 22\}, head = 0\}.*$gdb_prompt $" {
+        pass "print print_one_large_struct(*list1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_one_large_struct(*list1)" }
+    timeout           { fail "(timeout) print_one_large_struct(*list1)" }
+  }
+
+send_gdb "print print_one_double(*d1)\n"
+gdb_expect {
+    -re ".*Contents of one_double_t:\[ \r\n\]+1\\.111110\[ \r\n\]+.\[0-9\]+ = \{double1 = 1\\.11111\}.*$gdb_prompt $" {
+        pass "print print_one_double(*d1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_one_double(*d1)" }
+    timeout           { fail "(timeout) print_one_double(*d1)" }
+  }
+
+
+
+send_gdb "print print_two_floats(*f3)\n"
+gdb_expect {
+    -re ".*Contents of two_floats_t:\[ \r\n\]+-2\\.345000\[ \t]+1\\.000000\[ \r\n\]+.\[0-9\]+ = \{float1 = -2\\.34500003, float2 = 1\}.*$gdb_prompt $" {
+        pass "print print_two_floats(*f3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_two_floats(*f3)" }
+    timeout           { fail "(timeout) print_two_floats(*f3)" }
+  }
+
+send_gdb "print print_bit_flags(*flags)\n"
+gdb_expect {
+    -re ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}\[ \r\n\]+$gdb_prompt $" {
+        pass "print print_bit_flags(*flags)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_bit_flags(*flags)" }
+    timeout           { fail "(timeout) print_bit_flags(*flags)" }
+  }
+
+send_gdb "print print_bit_flags_combo(*flags_combo)\n"
+gdb_expect {
+    -re ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+ch1: y\[ \t\]+ch2: n\[ \r\n\]+.\[0-9\]+ = \{alpha = 1, beta = 0, ch1 = 121 'y', gamma = 1, delta = 0, ch2 = 110 'n', epsilon = 1, omega = 0\}\[ \r\n\]+$gdb_prompt $" {
+        pass "print print_bit_flags_combo(*flags_combo)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_bit_flags_combo(*flags_combo)" }
+    timeout           { fail "(timeout) print_bit_flags_combo(*flags_combo)" }
+  }
+
+send_gdb "print print_three_chars(*three_char)\n"
+gdb_expect {
+    -re ".*Contents of three_char_t:\[ \r\n\]+x\[ \t\]+y\[ \t\]+z\[ \r\n\]+.\[0-9\]+ = \{ch1 = 120 'x', ch2 = 121 'y', ch3 = 122 'z'\}\[ \r\n\]+$gdb_prompt $" {
+        pass "print print_three_chars(*three_char)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_three_chars(*three_char)" }
+    timeout           { fail "(timeout) print_three_chars(*three_char)" }
+  }
+
+send_gdb "print print_five_chars(*five_char)\n"
+gdb_expect {
+    -re ".*Contents of five_char_t:\[ \r\n\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o\[ \r\n\]+.\[0-9\]+ = \{ch1 = 104 'h', ch2 = 101 'e', ch3 = 108 'l', ch4 = 108 'l', ch5 = 111 'o'\}\[ \r\n\]+$gdb_prompt $" {
+        pass "print print_five_chars(*five_char)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_five_chars(*five_char)" }
+    timeout           { fail "(timeout) print_five_chars(*five_char)" }
+  }
+
+send_gdb "print print_int_char_combo(*int_char_combo)\n"
+gdb_expect {
+    -re ".*Contents of int_char_combo_t:\[ \r\n\]+13\[ \t\]+!\[ \r\n\]+.\[0-9\]+ = \{int1 = 13, ch1 = 33 '!'\}\[ \r\n\]+$gdb_prompt $" {
+        pass "print print_int_char_combo(*int_char_combo)"
+      }
+    -re ".*$gdb_prompt $" { fail "print print_int_char_combo(*int_char_combo)" }
+    timeout           { fail "(timeout) print_int_char_combo(*int_char_combo)" }
+  }
+
+return
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/call-strs.c b/gdb/testsuite/gdb.base/call-strs.c
new file mode 100644
index 0000000..9ba875b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-strs.c
@@ -0,0 +1,54 @@
+#include <stdio.h>
+char buf[100];
+char bigbuf[1000];
+char * s;
+
+char * str_func1(s1)
+char *s1;
+{
+  printf("first string arg is: %s\n", s1);
+  strcpy(bigbuf, s1);
+  return bigbuf;
+}
+
+char * str_func(s1, 
+                s2,
+               s3,
+               s4,
+               s5,
+               s6,
+               s7)
+char * s1; 
+char * s2;
+char * s3;
+char * s4;
+char * s5;
+char * s6;
+char * s7;
+{
+  printf("first string arg is: %s\n", s1);
+  printf("second string arg is: %s\n", s2);
+  printf("third string arg is: %s\n", s3);
+  printf("fourth string arg is: %s\n", s4);
+  printf("fifth string arg is: %s\n", s5);
+  printf("sixth string arg is: %s\n", s6);
+  printf("seventh string arg is: %s\n", s7);
+  strcpy(bigbuf, s1);
+  strcat(bigbuf, s2);
+  strcat(bigbuf, s3);
+  strcat(bigbuf, s4);
+  strcat(bigbuf, s5);
+  strcat(bigbuf, s6);
+  strcat(bigbuf, s7);
+  return bigbuf;
+}
+
+
+main()
+{
+  s = &buf[0];
+  strcpy(buf, "test string");
+  str_func("abcd", "efgh", "ijkl", "mnop", "qrst", "uvwx", "yz12");
+  str_func1("abcd");
+}
+
diff --git a/gdb/testsuite/gdb.base/call-strs.exp b/gdb/testsuite/gdb.base/call-strs.exp
new file mode 100644
index 0000000..20f358a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/call-strs.exp
@@ -0,0 +1,242 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This test deals with calling functions which have strings as parameters.
+# it plays around with constant strings.
+# the corresponding source file is call-strs.c
+#
+
+#debug strarg
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "call-strs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+# The a29k can't call functions, so don't even bother with this test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    send_gdb "set language c\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language c (timeout)" ; return 0; }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"c\".*$gdb_prompt $" {
+	    pass "set language to \"c\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"c\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#step
+send_gdb "step\n"
+gdb_expect {
+        -re ".*strcpy\\(buf, \"test string\"\\);.*$gdb_prompt $" {pass "step after assignment to s"}
+        -re ".*$gdb_prompt $" { fail "step after assignment to s" }
+        timeout { fail "step after assignment to s (timeout)" }
+    }
+
+
+#step
+send_gdb "step\n"
+gdb_expect {
+        -re ".*str_func\\(\"abcd\", \"efgh\", \"ijkl\", \"mnop\", \"qrst\", \"uvwx\", \"yz12\"\\);.*$gdb_prompt $" {pass "step after strcpy"}
+        -re ".*$gdb_prompt $" { fail "step after strcpy" }
+        timeout { fail "step after strcpy (timeout)" }
+    }
+
+#print buf
+send_gdb "print buf\n"
+gdb_expect {
+    -re ".*\"test string\",.*repeats 88 times.*$gdb_prompt $" {
+        pass "print buf"
+      }
+    -re ".*$gdb_prompt $" { fail "print buf" }
+    timeout           { fail "(timeout) print buf" }
+  }
+
+
+#print s
+send_gdb "print s\n"
+gdb_expect {
+    -re ".*= \"test string\".*$gdb_prompt $" {
+        pass "print s"
+      }
+    -re ".*$gdb_prompt $" { fail "print s" }
+    timeout           { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
+  }
+
+
+#print str_func1(s)
+send_gdb "print  str_func1(s)\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "print str_func1(s)"
+      }
+    -re ".*$gdb_prompt $" { fail "print str_func1(s)" }
+    timeout           { fail "(timeout) print str_func1(s)" }
+  }
+
+
+#print str_func1("test string")
+send_gdb "print  str_func1(\"test string\")\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "print str_func1(\"test string\")"
+      }
+    -re ".*$gdb_prompt $" { fail "print str_func1(\"test string\")" }
+    timeout           { fail "(timeout) print str_func1(\"test string\")" }
+  }
+
+#call str_func1(s)
+send_gdb "call  str_func1(s)\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "call str_func1(s)"
+      }
+    -re ".*$gdb_prompt $" { fail "call str_func1(s)" }
+    timeout           { fail "(timeout) call str_func1(s)" }
+  }
+
+#call str_func1("test string")
+send_gdb "call  str_func1(\"test string\")\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "call str_func1(\"test string\")"
+      }
+    -re ".*$gdb_prompt $" { fail "call str_func1(\"test string\")" }
+    timeout           { fail "(timeout) call str_func1(\"test string\")" }
+  }
+
+#print str_func1(buf)
+send_gdb "print  str_func1(buf)\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "print str_func1(buf)"
+      }
+    -re ".*$gdb_prompt $" { fail "print str_func1(buf)" }
+    timeout           { fail "(timeout) print str_func1(buf)" }
+  }
+
+#call str_func1(buf)
+send_gdb "call str_func1(buf)\n"
+gdb_expect {
+    -re "first string arg is: test string.*\"test string\".*$gdb_prompt $" {
+        pass "call str_func1(buf)"
+      }
+    -re ".*$gdb_prompt $" { fail "call str_func1(buf)" }
+    timeout           { fail "(timeout) call str_func1(buf)" }
+  }
+
+#print str_func("a","b","c","d","e","f","g")
+send_gdb "print  str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")\n"
+gdb_expect {
+    -re "first string arg is: a\[ \t\r\n\]+second string arg is: b\[ \t\r\n\]+third string arg is: c\[ \t\r\n\]+fourth string arg is: d\[ \t\r\n\]+fifth string arg is: e\[ \t\r\n\]+sixth string arg is: f\[ \t\r\n\]+seventh string arg is: g\[ \t\r\n\]+.*= \"abcdefg\".*$gdb_prompt $" {
+        pass "print str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")"
+      }
+    -re ".*$gdb_prompt $" { fail "print str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" }
+    timeout           { fail "(timeout) print str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" }
+  }
+
+#call str_func("a","b","c","d","e","f","g")
+send_gdb "call  str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")\n"
+gdb_expect {
+    -re "first string arg is: a\[ \t\r\n\]+second string arg is: b\[ \t\r\n\]+third string arg is: c\[ \t\r\n\]+fourth string arg is: d\[ \t\r\n\]+fifth string arg is: e\[ \t\r\n\]+sixth string arg is: f\[ \t\r\n\]+seventh string arg is: g\[ \t\r\n\]+.*= \"abcdefg\".*$gdb_prompt $" {
+        pass "call str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")"
+      }
+    -re ".*$gdb_prompt $" { fail "call str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" }
+    timeout           { fail "(timeout) call str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" }
+  }
+
+#print str_func(s,s,s,s,s,s,s,s)
+send_gdb "print  str_func(s,s,s,s,s,s,s,s)\n"
+gdb_expect {
+    -re "first string arg is: test string\[ \t\r\n\]+second string arg is: test string\[ \t\r\n\]+third string arg is: test string\[ \t\r\n\]+fourth string arg is: test string\[ \t\r\n\]+fifth string arg is: test string\[ \t\r\n\]+sixth string arg is: test string\[ \t\r\n\]+seventh string arg is: test string\[ \t\r\n\]+.*\"test stringtest stringtest stringtest stringtest stringtest stringtest string\".*$gdb_prompt $" {
+        pass "print str_func(s,s,s,s,s,s,s,s)"
+      }
+    -re ".*$gdb_prompt $" { fail "print str_func(s,s,s,s,s,s,s,s)" }
+    timeout           { fail "(timeout) print str_func(s,s,s,s,s,s,s,s)" }
+  }
+
+#call str_func(s,s,s,s,s,s,s,s)
+send_gdb "call  str_func(s,s,s,s,s,s,s,s)\n"
+gdb_expect {
+    -re "first string arg is: test string\[ \t\r\n\]+second string arg is: test string\[ \t\r\n\]+third string arg is: test string\[ \t\r\n\]+fourth string arg is: test string\[ \t\r\n\]+fifth string arg is: test string\[ \t\r\n\]+sixth string arg is: test string\[ \t\r\n\]+seventh string arg is: test string\[ \t\r\n\]+.*\"test stringtest stringtest stringtest stringtest stringtest stringtest string\".*$gdb_prompt $" {
+        pass "call str_func(s,s,s,s,s,s,s,s)"
+      }
+    -re ".*$gdb_prompt $" { fail "call str_func(s,s,s,s,s,s,s,s)" }
+    timeout           { fail "(timeout) call str_func(s,s,s,s,s,s,s,s)" }
+  }
+
+gdb_exit
+return 0
+~
diff --git a/gdb/testsuite/gdb.base/callfuncs.c b/gdb/testsuite/gdb.base/callfuncs.c
new file mode 100644
index 0000000..56b9ba8
--- /dev/null
+++ b/gdb/testsuite/gdb.base/callfuncs.c
@@ -0,0 +1,280 @@
+/* Support program for testing gdb's ability to call functions
+   in the inferior, pass appropriate arguments to those functions,
+   and get the returned result. */
+
+#ifdef NO_PROTOTYPES
+#define PARAMS(paramlist) ()
+#else
+#define PARAMS(paramlist) paramlist
+#endif
+
+char char_val1 = 'a';
+char char_val2 = 'b';
+
+short short_val1 = 10;
+short short_val2 = -23;
+
+int int_val1 = 87;
+int int_val2 = -26;
+
+long long_val1 = 789;
+long long_val2 = -321;
+
+float float_val1 = 3.14159;
+float float_val2 = -2.3765;
+
+double double_val1 = 45.654;
+double double_val2 = -67.66;
+
+#define DELTA (0.001)
+
+char *string_val1 = "string 1";
+char *string_val2 = "string 2";
+
+char char_array_val1[] = "carray 1";
+char char_array_val2[] = "carray 2";
+
+struct struct1 {
+  char c;
+  short s;
+  int i;
+  long l;
+  float f;
+  double d;
+  char a[4];
+} struct_val1 = { 'x', 87, 76, 51, 2.1234, 9.876, "foo" };
+
+/* Some functions that can be passed as arguments to other test
+   functions, or called directly. */
+
+int add (a, b)
+int a, b;
+{
+  return (a + b);
+}
+
+int doubleit (a)
+int a;
+{
+  return (a + a);
+}
+
+int (*func_val1) PARAMS((int,int)) = add;
+int (*func_val2) PARAMS((int)) = doubleit;
+
+/* An enumeration and functions that test for specific values. */
+
+enum enumtype { enumval1, enumval2, enumval3 };
+enum enumtype enum_val1 = enumval1;
+enum enumtype enum_val2 = enumval2;
+enum enumtype enum_val3 = enumval3;
+
+int t_enum_value1 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val1);
+}
+
+int t_enum_value2 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val2);
+}
+
+int t_enum_value3 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val3);
+}
+
+/* A function that takes a vector of integers (along with an explicit
+   count) and returns their sum. */
+
+int sum_args (argc, argv)
+int argc;
+int argv[];
+{
+  int sumval = 0;
+  int idx;
+
+  for (idx = 0; idx < argc; idx++)
+    {
+      sumval += argv[idx];
+    }
+  return (sumval);
+}
+
+/* Test that we can call functions that take structs and return
+   members from that struct */
+
+char   t_structs_c (tstruct) struct struct1 tstruct; { return (tstruct.c); }
+short  t_structs_s (tstruct) struct struct1 tstruct; { return (tstruct.s); }
+int    t_structs_i (tstruct) struct struct1 tstruct; { return (tstruct.i); }
+long   t_structs_l (tstruct) struct struct1 tstruct; { return (tstruct.l); }
+float  t_structs_f (tstruct) struct struct1 tstruct; { return (tstruct.f); }
+double t_structs_d (tstruct) struct struct1 tstruct; { return (tstruct.d); }
+char  *t_structs_a (tstruct) struct struct1 tstruct; { return (tstruct.a); }
+
+/* Test that calling functions works if there are a lot of arguments.  */
+int
+sum10 (i0, i1, i2, i3, i4, i5, i6, i7, i8, i9)
+     int i0, i1, i2, i3, i4, i5, i6, i7, i8, i9;
+{
+  return i0 + i1 + i2 + i3 + i4 + i5 + i6 + i7 + i8 + i9;
+}
+
+/* Test that args are passed in the right order. */
+int
+cmp10 (i0, i1, i2, i3, i4, i5, i6, i7, i8, i9)
+  int i0, i1, i2, i3, i4, i5, i6, i7, i8, i9;
+{
+  return
+    (i0 == 0) && (i1 == 1) && (i2 == 2) && (i3 == 3) && (i4 == 4) &&
+    (i5 == 5) && (i6 == 6) && (i7 == 7) && (i8 == 8) && (i9 == 9);
+}
+
+
+/* Gotta have a main to be able to generate a linked, runnable
+   executable, and also provide a useful place to set a breakpoint. */
+extern void * malloc() ;
+int main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  malloc(1);
+  t_structs_c(struct_val1);
+  return 0 ;
+}
+
+/* Functions that expect specific values to be passed and return 
+   either 0 or 1, depending upon whether the values were
+   passed incorrectly or correctly, respectively. */
+
+int t_char_values (char_arg1, char_arg2)
+char char_arg1, char_arg2;
+{
+  return ((char_arg1 == char_val1) && (char_arg2 == char_val2));
+}
+
+int
+#ifdef NO_PROTOTYPES
+t_small_values (arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10)
+     char arg1;
+     short arg2;
+     int arg3;
+     char arg4;
+     short arg5;
+     char arg6;
+     short arg7;
+     int arg8;
+     short arg9;
+     short arg10;
+#else
+t_small_values (char arg1, short arg2, int arg3, char arg4, short arg5,
+		char arg6, short arg7, int arg8, short arg9, short arg10)
+#endif
+{
+  return arg1 + arg2 + arg3 + arg4 + arg5 + arg6 + arg7 + arg8 + arg9 + arg10;
+}
+
+int t_short_values (short_arg1, short_arg2)
+short short_arg1, short_arg2;
+{
+  return ((short_arg1 == short_val1) && (short_arg2 == short_val2));
+}
+
+int t_int_values (int_arg1, int_arg2)
+int int_arg1, int_arg2;
+{
+  return ((int_arg1 == int_val1) && (int_arg2 == int_val2));
+}
+
+int t_long_values (long_arg1, long_arg2)
+long long_arg1, long_arg2;
+{
+  return ((long_arg1 == long_val1) && (long_arg2 == long_val2));
+}
+
+int t_float_values (float_arg1, float_arg2)
+float float_arg1, float_arg2;
+{
+  return ((float_arg1 - float_val1) < DELTA
+	  && (float_arg1 - float_val1) > -DELTA
+	  && (float_arg2 - float_val2) < DELTA
+	  && (float_arg2 - float_val2) > -DELTA);
+}
+
+int
+#ifdef NO_PROTOTYPES
+/* In this case we are just duplicating t_float_values, but that is the
+   easiest way to deal with either ANSI or non-ANSI.  */
+t_float_values2 (float_arg1, float_arg2)
+     float float_arg1, float_arg2;
+#else
+t_float_values2 (float float_arg1, float float_arg2)
+#endif
+{
+  return ((float_arg1 - float_val1) < DELTA
+	  && (float_arg1 - float_val1) > -DELTA
+	  && (float_arg2 - float_val2) < DELTA
+	  && (float_arg2 - float_val2) > -DELTA);
+}
+
+int t_double_values (double_arg1, double_arg2)
+double double_arg1, double_arg2;
+{
+  return ((double_arg1 - double_val1) < DELTA
+	  && (double_arg1 - double_val1) > -DELTA
+	  && (double_arg2 - double_val2) < DELTA
+	  && (double_arg2 - double_val2) > -DELTA);
+}
+
+int t_string_values (string_arg1, string_arg2)
+char *string_arg1, *string_arg2;
+{
+  return (!strcmp (string_arg1, string_val1) &&
+	  !strcmp (string_arg2, string_val2));
+}
+
+int t_char_array_values (char_array_arg1, char_array_arg2)
+char char_array_arg1[], char_array_arg2[];
+{
+  return (!strcmp (char_array_arg1, char_array_val1) &&
+	  !strcmp (char_array_arg2, char_array_val2));
+}
+
+
+/* This used to simply compare the function pointer arguments with
+   known values for func_val1 and func_val2.  Doing so is valid ANSI
+   code, but on some machines (RS6000, HPPA, others?) it may fail when
+   called directly by GDB.
+
+   In a nutshell, it's not possible for GDB to determine when the address
+   of a function or the address of the function's stub/trampoline should
+   be passed.
+
+   So, to avoid GDB lossage in the common case, we perform calls through the
+   various function pointers and compare the return values.  For the HPPA
+   at least, this allows the common case to work.
+
+   If one wants to try something more complicated, pass the address of
+   a function accepting a "double" as one of its first 4 arguments.  Call
+   that function indirectly through the function pointer.  This would fail
+   on the HPPA.  */
+
+int t_func_values (func_arg1, func_arg2)
+int (*func_arg1) PARAMS ((int, int));
+int (*func_arg2) PARAMS ((int));
+{
+  return ((*func_arg1) (5,5)  == (*func_val1) (5,5)
+          && (*func_arg2) (6) == (*func_val2) (6));
+}
+
+int t_call_add (func_arg1, a, b)
+int (*func_arg1) PARAMS ((int, int));
+int a, b;
+{
+  return ((*func_arg1)(a, b));
+}
diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp
new file mode 100644
index 0000000..19b5c96
--- /dev/null
+++ b/gdb/testsuite/gdb.base/callfuncs.exp
@@ -0,0 +1,269 @@
+# Copyright (C) 92, 96, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+# and modified by Bob Manson. (manson@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "callfuncs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+set prototypes 1
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    set prototypes 0;
+    # built the second test case since we can't use prototypes
+    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+    if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DNO_PROTOTYPES}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# The a29k can't call functions, so don't even bother with this test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    send_gdb "set language c\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language c (timeout)" ; return 0; }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"c\".*$gdb_prompt $" {
+	    pass "set language to \"c\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"c\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# FIXME:  Before calling this proc, we should probably verify that
+# we can call inferior functions and get a valid integral value
+# returned.
+# Note that it is OK to check for 0 or 1 as the returned values, because C
+# specifies that the numeric value of a relational or logical expression
+# (computed in the inferior) is 1 for true and 0 for false.
+
+proc do_function_calls {} {
+    global prototypes
+    global gcc_compiled
+    # We need to up this because this can be really slow on some boards.
+    set timeout 60;
+
+    gdb_test "p t_char_values(0,0)" " = 0"
+    gdb_test "p t_char_values('a','b')" " = 1"
+    gdb_test "p t_char_values(char_val1,char_val2)" " = 1"
+    gdb_test "p t_char_values('a',char_val2)" " = 1"
+    gdb_test "p t_char_values(char_val1,'b')" " = 1"
+
+    gdb_test "p t_short_values(0,0)" " = 0"
+    gdb_test "p t_short_values(10,-23)" " = 1"
+    gdb_test "p t_short_values(short_val1,short_val2)" " = 1"
+    gdb_test "p t_short_values(10,short_val2)" " = 1"
+    gdb_test "p t_short_values(short_val1,-23)" " = 1"
+
+    gdb_test "p t_int_values(0,0)" " = 0"
+    gdb_test "p t_int_values(87,-26)" " = 1"
+    gdb_test "p t_int_values(int_val1,int_val2)" " = 1"
+    gdb_test "p t_int_values(87,int_val2)" " = 1"
+    gdb_test "p t_int_values(int_val1,-26)" " = 1"
+
+    gdb_test "p t_long_values(0,0)" " = 0"
+    gdb_test "p t_long_values(789,-321)" " = 1"
+    gdb_test "p t_long_values(long_val1,long_val2)" " = 1"
+    gdb_test "p t_long_values(789,long_val2)" " = 1"
+    gdb_test "p t_long_values(long_val1,-321)" " = 1"
+
+    if ![target_info exists gdb,skip_float_tests] {
+	gdb_test "p t_float_values(0.0,0.0)" " = 0"
+
+	# These next four tests fail on the mn10300.
+	# The first value is passed in regs, the other in memory.
+	# Gcc emits different stabs for the two parameters; the first is
+	# claimed to be a float, the second a double.
+	# dbxout.c in gcc claims this is the desired behavior.
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(3.14159,-2.3765)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(float_val1,float_val2)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(3.14159,float_val2)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(float_val1,-2.3765)" " = 1"
+
+	# Test passing of arguments which might not be widened.
+	gdb_test "p t_float_values2(0.0,0.0)" " = 0"
+
+	# Although PR 5318 mentions SunOS specifically, this seems
+	# to be a generic problem on quite a few platforms.
+	if $prototypes then {
+	    setup_xfail "hppa*-*-*" "sparc-*-*" "mips*-*-*" 5318
+	    if {!$gcc_compiled} then {
+		setup_xfail "alpha-dec-osf2*" "i*86-*-sysv4*" 5318
+	    }
+	}
+	gdb_test "p t_float_values2(3.14159,float_val2)" " = 1"
+	gdb_test "p t_small_values(1,2,3,4,5,6,7,8,9,10)" " = 55"
+
+	gdb_test "p t_double_values(0.0,0.0)" " = 0"
+	gdb_test "p t_double_values(45.654,-67.66)" " = 1"
+	gdb_test "p t_double_values(double_val1,double_val2)" " = 1"
+	gdb_test "p t_double_values(45.654,double_val2)" " = 1"
+	gdb_test "p t_double_values(double_val1,-67.66)" " = 1"
+    }
+
+    gdb_test "p t_string_values(string_val2,string_val1)" " = 0"
+    gdb_test "p t_string_values(string_val1,string_val2)" " = 1"
+    gdb_test "p t_string_values(\"string 1\",\"string 2\")" " = 1"
+    gdb_test "p t_string_values(\"string 1\",string_val2)" " = 1"
+    gdb_test "p t_string_values(string_val1,\"string 2\")" " = 1"
+
+    gdb_test "p t_char_array_values(char_array_val2,char_array_val1)" " = 0"
+    gdb_test "p t_char_array_values(char_array_val1,char_array_val2)" " = 1"
+    gdb_test "p t_char_array_values(\"carray 1\",\"carray 2\")" " = 1"
+    gdb_test "p t_char_array_values(\"carray 1\",char_array_val2)" " = 1"
+    gdb_test "p t_char_array_values(char_array_val1,\"carray 2\")" " = 1"
+
+    gdb_test "p doubleit(4)" " = 8"
+    gdb_test "p add(4,5)" " = 9"
+    gdb_test "p t_func_values(func_val2,func_val1)" " = 0"
+    gdb_test "p t_func_values(func_val1,func_val2)" " = 1"
+
+    # On the rs6000, we need to pass the address of the trampoline routine,
+    # not the address of add itself.  I don't know how to go from add to
+    # the address of the trampoline.  Similar problems exist on the HPPA,
+    # and in fact can present an unsolvable problem as the stubs may not
+    # even exist in the user's program.  We've slightly recoded t_func_values
+    # to avoid such problems in the common case.  This may or may not help
+    # the RS6000.
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_func_values(add,func_val2)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_func_values(add,func_val2)" " = 1"
+    }
+
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_func_values(func_val1,doubleit)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_func_values(func_val1,doubleit)" " = 1"
+    }
+
+    gdb_test "p t_call_add(func_val1,3,4)" " = 7"
+
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_call_add(add,3,4)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_call_add(add,3,4)" " = 7"
+    }
+
+    gdb_test "p t_enum_value1(enumval1)" " = 1"
+    gdb_test "p t_enum_value1(enum_val1)" " = 1"
+    gdb_test "p t_enum_value1(enum_val2)" " = 0"
+
+    gdb_test "p t_enum_value2(enumval2)" " = 1"
+    gdb_test "p t_enum_value2(enum_val2)" " = 1"
+    gdb_test "p t_enum_value2(enum_val1)" " = 0"
+
+    gdb_test "p sum_args(1,{2})" " = 2"
+    gdb_test "p sum_args(2,{2,3})" " = 5"
+    gdb_test "p sum_args(3,{2,3,4})" " = 9"
+    gdb_test "p sum_args(4,{2,3,4,5})" " = 14"
+
+    gdb_test "p sum10 (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)" " = 55"
+
+    gdb_test "p cmp10 (0, 1, 2, 3, 4, 5, 6, 7, 8, 9)" " = 1"
+
+    gdb_test "p t_structs_c(struct_val1)" "= 120 'x'" \
+	"call inferior func with struct - returns char"
+    gdb_test "p t_structs_s(struct_val1)" "= 87" \
+	"call inferior func with struct -  returns short"
+    gdb_test "p t_structs_i(struct_val1)" "= 76" \
+	"call inferior func with struct - returns int"
+    gdb_test "p t_structs_l(struct_val1)" "= 51" \
+	"call inferior func with struct - returns long"
+    setup_xfail "i*86-*-*"
+    gdb_test "p t_structs_f(struct_val1)" "= 2.12.*" \
+       	"call inferior func with struct - returns float"
+    setup_xfail "i*86-*-*"
+    gdb_test "p t_structs_d(struct_val1)" "= 9.87.*" \
+    	"call inferior func with struct - returns double"
+    gdb_test "p t_structs_a(struct_val1)" "= (.unsigned char .. )?\"foo\"" \
+    	"call inferior func with struct - returns char *"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set print sevenbit-strings" ""
+gdb_test "set print address off" ""
+gdb_test "set width 0" ""
+
+if { ![set_lang_c] } {
+    gdb_suppress_tests;
+} else {
+    if { ![runto_main] } {
+	gdb_suppress_tests;
+    }
+}
+
+gdb_test "next" ".*"
+do_function_calls
+
+return 0
diff --git a/gdb/testsuite/gdb.base/callfuncs2.c b/gdb/testsuite/gdb.base/callfuncs2.c
new file mode 100644
index 0000000..ac14d45
--- /dev/null
+++ b/gdb/testsuite/gdb.base/callfuncs2.c
@@ -0,0 +1,267 @@
+/* Support program for testing gdb's ability to call functions
+   in an inferior which doesn't itself call malloc, pass appropriate
+   arguments to those functions, and get the returned result. */
+
+#ifdef NO_PROTOTYPES
+#define PARAMS(paramlist) ()
+#else
+#define PARAMS(paramlist) paramlist
+#endif
+
+char char_val1 = 'a';
+char char_val2 = 'b';
+
+short short_val1 = 10;
+short short_val2 = -23;
+
+int int_val1 = 87;
+int int_val2 = -26;
+
+long long_val1 = 789;
+long long_val2 = -321;
+
+float float_val1 = 3.14159;
+float float_val2 = -2.3765;
+
+double double_val1 = 45.654;
+double double_val2 = -67.66;
+
+#define DELTA (0.001)
+
+char *string_val1 = "string 1";
+char *string_val2 = "string 2";
+
+char char_array_val1[] = "carray 1";
+char char_array_val2[] = "carray 2";
+
+struct struct1 {
+  char c;
+  short s;
+  int i;
+  long l;
+  float f;
+  double d;
+  char a[4];
+} struct_val1 = { 'x', 87, 76, 51, 2.1234, 9.876, "foo" };
+
+/* Some functions that can be passed as arguments to other test
+   functions, or called directly. */
+
+int add (a, b)
+int a, b;
+{
+  return (a + b);
+}
+
+int doubleit (a)
+int a;
+{
+  return (a + a);
+}
+
+int (*func_val1) PARAMS((int,int)) = add;
+int (*func_val2) PARAMS((int)) = doubleit;
+
+/* An enumeration and functions that test for specific values. */
+
+enum enumtype { enumval1, enumval2, enumval3 };
+enum enumtype enum_val1 = enumval1;
+enum enumtype enum_val2 = enumval2;
+enum enumtype enum_val3 = enumval3;
+
+t_enum_value1 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val1);
+}
+
+t_enum_value2 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val2);
+}
+
+t_enum_value3 (enum_arg)
+enum enumtype enum_arg;
+{
+  return (enum_arg == enum_val3);
+}
+
+/* A function that takes a vector of integers (along with an explicit
+   count) and returns their sum. */
+
+int sum_args (argc, argv)
+int argc;
+int argv[];
+{
+  int sumval = 0;
+  int idx;
+
+  for (idx = 0; idx < argc; idx++)
+    {
+      sumval += argv[idx];
+    }
+  return (sumval);
+}
+
+/* Test that we can call functions that take structs and return
+   members from that struct */
+
+char   t_structs_c (tstruct) struct struct1 tstruct; { return (tstruct.c); }
+short  t_structs_s (tstruct) struct struct1 tstruct; { return (tstruct.s); }
+int    t_structs_i (tstruct) struct struct1 tstruct; { return (tstruct.i); }
+long   t_structs_l (tstruct) struct struct1 tstruct; { return (tstruct.l); }
+float  t_structs_f (tstruct) struct struct1 tstruct; { return (tstruct.f); }
+double t_structs_d (tstruct) struct struct1 tstruct; { return (tstruct.d); }
+char  *t_structs_a (tstruct) struct struct1 tstruct; { return (tstruct.a); }
+
+/* Test that calling functions works if there are a lot of arguments.  */
+int
+sum10 (i0, i1, i2, i3, i4, i5, i6, i7, i8, i9)
+     int i0, i1, i2, i3, i4, i5, i6, i7, i8, i9;
+{
+  return i0 + i1 + i2 + i3 + i4 + i5 + i6 + i7 + i8 + i9;
+}
+
+/* Gotta have a main to be able to generate a linked, runnable
+   executable, and also provide a useful place to set a breakpoint. */
+
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  t_structs_c(struct_val1);
+}
+
+/* Functions that expect specific values to be passed and return 
+   either 0 or 1, depending upon whether the values were
+   passed incorrectly or correctly, respectively. */
+
+int t_char_values (char_arg1, char_arg2)
+char char_arg1, char_arg2;
+{
+  return ((char_arg1 == char_val1) && (char_arg2 == char_val2));
+}
+
+int
+#ifdef NO_PROTOTYPES
+t_small_values (arg1, arg2, arg3, arg4, arg5, arg6, arg7, arg8, arg9, arg10)
+     char arg1;
+     short arg2;
+     int arg3;
+     char arg4;
+     short arg5;
+     char arg6;
+     short arg7;
+     int arg8;
+     short arg9;
+     short arg10;
+#else
+t_small_values (char arg1, short arg2, int arg3, char arg4, short arg5,
+		char arg6, short arg7, int arg8, short arg9, short arg10)
+#endif
+{
+  return arg1 + arg2 + arg3 + arg4 + arg5 + arg6 + arg7 + arg8 + arg9 + arg10;
+}
+
+int t_short_values (short_arg1, short_arg2)
+short short_arg1, short_arg2;
+{
+  return ((short_arg1 == short_val1) && (short_arg2 == short_val2));
+}
+
+int t_int_values (int_arg1, int_arg2)
+int int_arg1, int_arg2;
+{
+  return ((int_arg1 == int_val1) && (int_arg2 == int_val2));
+}
+
+int t_long_values (long_arg1, long_arg2)
+long long_arg1, long_arg2;
+{
+  return ((long_arg1 == long_val1) && (long_arg2 == long_val2));
+}
+
+int t_float_values (float_arg1, float_arg2)
+float float_arg1, float_arg2;
+{
+  return ((float_arg1 - float_val1) < DELTA
+	  && (float_arg1 - float_val1) > -DELTA
+	  && (float_arg2 - float_val2) < DELTA
+	  && (float_arg2 - float_val2) > -DELTA);
+}
+
+int
+#ifdef NO_PROTOTYPES
+/* In this case we are just duplicating t_float_values, but that is the
+   easiest way to deal with either ANSI or non-ANSI.  */
+t_float_values2 (float_arg1, float_arg2)
+     float float_arg1, float_arg2;
+#else
+t_float_values2 (float float_arg1, float float_arg2)
+#endif
+{
+  return ((float_arg1 - float_val1) < DELTA
+	  && (float_arg1 - float_val1) > -DELTA
+	  && (float_arg2 - float_val2) < DELTA
+	  && (float_arg2 - float_val2) > -DELTA);
+}
+
+int t_double_values (double_arg1, double_arg2)
+double double_arg1, double_arg2;
+{
+  return ((double_arg1 - double_val1) < DELTA
+	  && (double_arg1 - double_val1) > -DELTA
+	  && (double_arg2 - double_val2) < DELTA
+	  && (double_arg2 - double_val2) > -DELTA);
+}
+
+int t_string_values (string_arg1, string_arg2)
+char *string_arg1, *string_arg2;
+{
+  return (!strcmp (string_arg1, string_val1) &&
+	  !strcmp (string_arg2, string_val2));
+}
+
+int t_char_array_values (char_array_arg1, char_array_arg2)
+char char_array_arg1[], char_array_arg2[];
+{
+  return (!strcmp (char_array_arg1, char_array_val1) &&
+	  !strcmp (char_array_arg2, char_array_val2));
+}
+
+
+/* This used to simply compare the function pointer arguments with
+   known values for func_val1 and func_val2.  Doing so is valid ANSI
+   code, but on some machines (RS6000, HPPA, others?) it may fail when
+   called directly by GDB.
+
+   In a nutshell, it's not possible for GDB to determine when the address
+   of a function or the address of the function's stub/trampoline should
+   be passed.
+
+   So, to avoid GDB lossage in the common case, we perform calls through the
+   various function pointers and compare the return values.  For the HPPA
+   at least, this allows the common case to work.
+
+   If one wants to try something more complicated, pass the address of
+   a function accepting a "double" as one of its first 4 arguments.  Call
+   that function indirectly through the function pointer.  This would fail
+   on the HPPA.  */
+
+int t_func_values (func_arg1, func_arg2)
+int (*func_arg1) PARAMS ((int, int));
+int (*func_arg2) PARAMS ((int));
+{
+  return ((*func_arg1) (5,5)  == (*func_val1) (5,5)
+          && (*func_arg2) (6) == (*func_val2) (6));
+}
+
+int t_call_add (func_arg1, a, b)
+int (*func_arg1) PARAMS ((int, int));
+int a, b;
+{
+  return ((*func_arg1)(a, b));
+}
diff --git a/gdb/testsuite/gdb.base/callfuncs2.exp b/gdb/testsuite/gdb.base/callfuncs2.exp
new file mode 100644
index 0000000..8b17b63
--- /dev/null
+++ b/gdb/testsuite/gdb.base/callfuncs2.exp
@@ -0,0 +1,276 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+# SAME tests as in callfuncs.exp but here the inferior program does not call malloc.
+
+
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "callfuncs2"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+set prototypes 1
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    set prototypes 0;
+    # built the second test case since we can't use prototypes
+    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+    if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DNO_PROTOTYPES}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+
+
+# The a29k can't call functions, so don't even bother with this test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    send_gdb "set language c\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language c (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"c\".*$gdb_prompt $" {
+	    pass "set language to \"c\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"c\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# FIXME:  Before calling this proc, we should probably verify that
+# we can call inferior functions and get a valid integral value
+# returned.
+# Note that it is OK to check for 0 or 1 as the returned values, because C
+# specifies that the numeric value of a relational or logical expression
+# (computed in the inferior) is 1 for true and 0 for false.
+
+proc do_function_calls {} {
+    global prototypes
+    global gcc_compiled
+    # We need to up this because this can be really slow on some boards.
+    set timeout 60;
+
+    gdb_test "p t_char_values(0,0)" " = 0"
+    gdb_test "p t_char_values('a','b')" " = 1"
+    gdb_test "p t_char_values(char_val1,char_val2)" " = 1"
+    gdb_test "p t_char_values('a',char_val2)" " = 1"
+    gdb_test "p t_char_values(char_val1,'b')" " = 1"
+
+    gdb_test "p t_short_values(0,0)" " = 0"
+    gdb_test "p t_short_values(10,-23)" " = 1"
+    gdb_test "p t_short_values(short_val1,short_val2)" " = 1"
+    gdb_test "p t_short_values(10,short_val2)" " = 1"
+    gdb_test "p t_short_values(short_val1,-23)" " = 1"
+
+    gdb_test "p t_int_values(0,0)" " = 0"
+    gdb_test "p t_int_values(87,-26)" " = 1"
+    gdb_test "p t_int_values(int_val1,int_val2)" " = 1"
+    gdb_test "p t_int_values(87,int_val2)" " = 1"
+    gdb_test "p t_int_values(int_val1,-26)" " = 1"
+
+    gdb_test "p t_long_values(0,0)" " = 0"
+    gdb_test "p t_long_values(789,-321)" " = 1"
+    gdb_test "p t_long_values(long_val1,long_val2)" " = 1"
+    gdb_test "p t_long_values(789,long_val2)" " = 1"
+    gdb_test "p t_long_values(long_val1,-321)" " = 1"
+
+    if ![target_info exists gdb,skip_float_tests] {
+	gdb_test "p t_float_values(0.0,0.0)" " = 0"
+
+	# These next four tests fail on the mn10300.
+	# The first value is passed in regs, the other in memory.
+	# Gcc emits different stabs for the two parameters; the first is
+	# claimed to be a float, the second a double.
+	# dbxout.c in gcc claims this is the desired behavior.
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(3.14159,-2.3765)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(float_val1,float_val2)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(3.14159,float_val2)" " = 1"
+	setup_xfail "mn10300-*-*"
+	gdb_test "p t_float_values(float_val1,-2.3765)" " = 1"
+
+	# Test passing of arguments which might not be widened.
+	gdb_test "p t_float_values2(0.0,0.0)" " = 0"
+
+	# Although PR 5318 mentions SunOS specifically, this seems
+	# to be a generic problem on quite a few platforms.
+	if $prototypes then {
+	    setup_xfail "hppa*-*-*" "sparc-*-*" "mips*-*-*" 5318
+	    if {!$gcc_compiled} then {
+		setup_xfail "alpha-dec-osf2*" "i*86-*-sysv4*" 5318
+	    }
+	}
+	gdb_test "p t_float_values2(3.14159,float_val2)" " = 1"
+	gdb_test "p t_small_values(1,2,3,4,5,6,7,8,9,10)" " = 55"
+
+	gdb_test "p t_double_values(0.0,0.0)" " = 0"
+	gdb_test "p t_double_values(45.654,-67.66)" " = 1"
+	gdb_test "p t_double_values(double_val1,double_val2)" " = 1"
+	gdb_test "p t_double_values(45.654,double_val2)" " = 1"
+	gdb_test "p t_double_values(double_val1,-67.66)" " = 1"
+   
+    }
+
+    gdb_test "p t_string_values(string_val2,string_val1)" " = 0"
+    gdb_test "p t_string_values(string_val1,string_val2)" " = 1"
+    gdb_test "p t_string_values(\"string 1\",\"string 2\")" " = 1"
+    gdb_test "p t_string_values(\"string 1\",string_val2)" " = 1"
+    gdb_test "p t_string_values(string_val1,\"string 2\")" " = 1"
+
+    gdb_test "p t_char_array_values(char_array_val2,char_array_val1)" " = 0"
+    gdb_test "p t_char_array_values(char_array_val1,char_array_val2)" " = 1"
+    gdb_test "p t_char_array_values(\"carray 1\",\"carray 2\")" " = 1"
+    gdb_test "p t_char_array_values(\"carray 1\",char_array_val2)" " = 1"
+    gdb_test "p t_char_array_values(char_array_val1,\"carray 2\")" " = 1"
+
+    gdb_test "p doubleit(4)" " = 8"
+    gdb_test "p add(4,5)" " = 9"
+    gdb_test "p t_func_values(func_val2,func_val1)" " = 0"
+    gdb_test "p t_func_values(func_val1,func_val2)" " = 1"
+
+    # On the rs6000, we need to pass the address of the trampoline routine,
+    # not the address of add itself.  I don't know how to go from add to
+    # the address of the trampoline.  Similar problems exist on the HPPA,
+    # and in fact can present an unsolvable problem as the stubs may not
+    # even exist in the user's program.  We've slightly recoded t_func_values
+    # to avoid such problems in the common case.  This may or may not help
+    # the RS6000.
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_func_values(add,func_val2)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_func_values(add,func_val2)" " = 1"
+    }
+
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_func_values(func_val1,doubleit)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_func_values(func_val1,doubleit)" " = 1"
+    }
+
+    gdb_test "p t_call_add(func_val1,3,4)" " = 7"
+
+    setup_xfail "rs6000*-*-*"
+    setup_xfail "powerpc*-*-*"
+
+    if {!$gcc_compiled && [istarget hppa*-*-hpux*]} then {
+	gdb_test "p t_call_add(add,3,4)" "You cannot.*ignored.*"
+    } else {
+	gdb_test "p t_call_add(add,3,4)" " = 7"
+    }
+    
+    gdb_test "p t_enum_value1(enumval1)" " = 1"
+    gdb_test "p t_enum_value1(enum_val1)" " = 1"
+    gdb_test "p t_enum_value1(enum_val2)" " = 0"
+
+    gdb_test "p t_enum_value2(enumval2)" " = 1"
+    gdb_test "p t_enum_value2(enum_val2)" " = 1"
+    gdb_test "p t_enum_value2(enum_val1)" " = 0"
+
+    gdb_test "p sum_args(1,{2})" " = 2"
+    gdb_test "p sum_args(2,{2,3})" " = 5"
+    gdb_test "p sum_args(3,{2,3,4})" " = 9"
+    gdb_test "p sum_args(4,{2,3,4,5})" " = 14"
+    gdb_test "p sum10 (1, 2, 3, 4, 5, 6, 7, 8, 9, 10)" " = 55"
+
+    gdb_test "p t_structs_c(struct_val1)" "= 120 'x'" \
+	"call inferior func with struct - returns char"
+    gdb_test "p t_structs_s(struct_val1)" "= 87" \
+	"call inferior func with struct -  returns short"
+    gdb_test "p t_structs_i(struct_val1)" "= 76" \
+	"call inferior func with struct - returns int"
+    gdb_test "p t_structs_l(struct_val1)" "= 51" \
+	"call inferior func with struct - returns long"
+    setup_xfail "i*86-*-*"
+    gdb_test "p t_structs_f(struct_val1)" "= 2.12.*" \
+	"call inferior func with struct - returns float"
+    setup_xfail "i*86-*-*"
+    gdb_test "p t_structs_d(struct_val1)" "= 9.87.*" \
+	"call inferior func with struct - returns double"
+    gdb_test "p t_structs_a(struct_val1)" "= (.unsigned char .. )?\"foo\"" \
+	"call inferior func with struct - returns char *"
+
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set print sevenbit-strings" ""
+gdb_test "set print address off" ""
+gdb_test "set width 0" ""
+
+if { ![set_lang_c] } {
+    gdb_suppress_tests;
+} else {
+    if { ![runto_main] } {
+	gdb_suppress_tests;
+    }
+}
+
+gdb_test "next" ".*"
+do_function_calls
+
+return 0
diff --git a/gdb/testsuite/gdb.base/commands.exp b/gdb/testsuite/gdb.base/commands.exp
new file mode 100644
index 0000000..f70ac6b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/commands.exp
@@ -0,0 +1,248 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test special commands (if, while, etc)
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "run"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/commands
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+delete_breakpoints
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+proc gdbvar_simple_if_test {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 0" "" "set foo in gdbvar_simple_if_test"
+    # All this test should do is print 0xdeadbeef once.
+    gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
+    # All this test should do is print 0xfeedface once.
+    gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
+}
+
+proc gdbvar_simple_while_test {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 5" "" "set foo in gdbvar_simple_while_test"
+    # This test should print 0xfeedface five times.
+    gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_while_test #1"
+}
+
+proc gdbvar_complex_if_while_test {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 4" "" "set foo in gdbvar complex_if_while_test"
+    # This test should alternate between 0xdeadbeef and 0xfeedface two times.
+    gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "gdbvar_complex_if_while_test #1"
+}
+
+proc progvar_simple_if_test {} {
+    global gdb_prompt
+
+    if [target_info exists noargs] { 
+        verbose "Skipping progvar_simple_if_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests; }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #1"
+    # All this test should do is print 0xdeadbeef once.
+    gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xdeadbeef" "progvar_simple_if_test #1"
+    # All this test should do is print 0xfeedface once.
+    gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" "\\\$\[0-9\]* = 0xfeedface" "progvar_simple_if_test #2"
+    gdb_stop_suppressing_tests;
+}
+
+proc progvar_simple_while_test {} {
+    global gdb_prompt
+
+    if [target_info exists noargs] { 
+        verbose "Skipping progvar_simple_while_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test #2"
+    # This test should print 0xfeedface five times.
+    gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_simple_while_test #1"
+    gdb_stop_suppressing_tests;
+}
+
+proc progvar_complex_if_while_test {} {
+    global gdb_prompt
+
+    if [target_info exists noargs] { 
+        verbose "Skipping progvar_simple_if_while_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=4" "" "set value to 4 in progvar_simple_if_test"
+    # This test should alternate between 0xdeadbeef and 0xfeedface two times.
+    gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "progvar_complex_if_while_test #1"
+    gdb_stop_suppressing_tests;
+}
+
+proc if_while_breakpoint_command_test {} {
+    if [target_info exists noargs] { 
+        verbose "Skipping if_while_breakpoint_command_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=5" "" "set value to 5 in progvar_simple_if_test"
+    delete_breakpoints
+    gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1"
+
+    send_gdb "commands\n"
+    gdb_expect {
+	-re "End with" {
+	    pass "commands in if_while_breakpoint_command_test"
+	}
+        default {
+	    fail "(timeout or eof) commands in if_while_breakpoint_command_test"
+	}
+    }
+    # This test should alternate between 0xdeadbeef and 0xfeedface two times.
+    gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "commands part 2 in if_while_breakpoint_command_test"
+    gdb_test "continue" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "if_while_breakpoint_command_test #1"
+   gdb_test "info break" "while.*set.*if.*p/x.*else.*p/x.*end.*" "info break in if_while_breakpoint_command_test"
+    gdb_stop_suppressing_tests;
+}
+
+# Test that we can run the inferior from breakpoint commands.
+proc infrun_breakpoint_command_test {} {
+    if [target_info exists noargs] { 
+        verbose "Skipping infrun_breakpoint_command_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #1"
+    delete_breakpoints
+    gdb_test "break factorial if value == 5" "Breakpoint.*at.*"
+
+# infrun_breakpoint_command_test - This test was broken into two parts 
+# to get around a synchronization problem in expect.
+# part1: issue the gdb command "commands"
+# part2: send the list of commands
+    send_gdb "commands\n"
+    gdb_expect {
+	-re "End with" {
+	    pass "commands in infrun_breakpoint_command_test #1"
+	}
+        default {
+	    fail "(timeout or eof) commands in infrun_breakpoint_command_test"
+	}
+    }
+    gdb_test "step\nstep\nstep\nstep\nbt\nend" "" \
+	"commands in infrun_breakpoint_command_test #2"
+    
+    gdb_test "continue" "Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*
+\[0-9\]*\[ 	\]*if \\(value > 1\\) \{.*
+\[0-9\]*\[ 	\]*value \\*= factorial \\(value - 1\\);.*
+factorial \\(value=4\\) at.*\[0-9\]*\[ 	\]*if \\(value > 1\\) \{.*
+\[0-9\]*\[ 	\]*value \\*= factorial \\(value - 1\\);.*
+factorial \\(value=3\\) at .*
+\[0-9\]*\[ 	\]*if \\(value > 1\\) \{.*
+#0  factorial \\(value=3\\).*
+#1  \[0-9a-fx\]* in factorial \\(value=4\\).*
+#2  \[0-9a-fx\]* in factorial \\(value=5\\).*
+#3  \[0-9a-fx\]* in factorial \\(value=6\\).*
+#4  \[0-9a-fx\]* in main \\(.*\\).*" \
+	"continue in infrun_breakpoint_command_test";
+    gdb_stop_suppressing_tests;
+}
+
+proc breakpoint_command_test {} {
+    if [target_info exists noargs] { 
+        verbose "Skipping breakpoint_command_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests; }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=6" "" "set value to 6 in progvar_simple_if_test #2"
+    delete_breakpoints
+    gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
+    gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \
+	"Type commands.*\nEnd with.*" "commands in breakpoint_command_test"
+    gdb_test "continue" "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \
+	"continue in breakpoint_command_test"
+    gdb_test "print value" " = 5" "print value in breakpoint_command_test"
+    gdb_stop_suppressing_tests;
+}
+
+# Test a simple user defined command (with arguments)
+proc user_defined_command_test {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 4" "" "set foo in user_defined_command_test"
+
+    send_gdb "define mycommand\n"
+    gdb_expect {
+	-re "End with"  {
+	    pass "define mycommand in user_defined_command_test"
+	}
+        default {
+	    fail "(timeout or eof) define mycommand in user_defined_command_test"
+	}
+    }
+    # This test should alternate between 0xdeadbeef and 0xfeedface two times.
+    gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" "" "enter commands in user_defined_command_test"
+
+    gdb_test "mycommand \$foo" "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" "execute user defined command in user_defined_command_test"
+   gdb_test "show user mycommand" "while.*set.*if.*p/x.*else.*p/x.*end.*" "display user command in user_defined_command_test"
+}
+
+gdbvar_simple_if_test
+gdbvar_simple_while_test
+gdbvar_complex_if_while_test
+progvar_simple_if_test
+progvar_simple_while_test
+progvar_complex_if_while_test
+if_while_breakpoint_command_test
+infrun_breakpoint_command_test
+breakpoint_command_test
+user_defined_command_test
diff --git a/gdb/testsuite/gdb.base/compiler.c b/gdb/testsuite/gdb.base/compiler.c
new file mode 100644
index 0000000..8eb0d47
--- /dev/null
+++ b/gdb/testsuite/gdb.base/compiler.c
@@ -0,0 +1,31 @@
+/* Often the behavior of any particular test depends upon what compiler was
+   used to compile the test.  As each test is compiled, this file is
+   preprocessed by the same compiler used to compile that specific test
+   (different tests might be compiled by different compilers, particularly
+   if compiled at different times), and used to generate a *.ci (compiler
+   info) file for that test.
+
+   I.E., when callfuncs is compiled, a callfuncs.ci file will be generated,
+   which can then be sourced by callfuncs.exp to give callfuncs.exp access
+   to information about the compilation environment.
+
+   TODO:  It might be a good idea to add expect code that tests each
+   definition made with 'set" to see if one already exists, and if so
+   warn about conflicts if it is being set to something else.  */
+
+/* This needs to be kept in sync with whatis.c and gdb.exp(get_compiler_info).
+   If this ends up being hairy, we could use a common header file.  */
+
+#if defined (__STDC__) || defined (_AIX)
+set signed_keyword_not_used 0
+#else
+set signed_keyword_not_used 1
+#endif
+
+#if defined (__GNUC__)
+set gcc_compiled __GNUC__
+#else
+set gcc_compiled 0
+#endif
+
+return 0
diff --git a/gdb/testsuite/gdb.base/completion.exp b/gdb/testsuite/gdb.base/completion.exp
new file mode 100644
index 0000000..b4d97f0
--- /dev/null
+++ b/gdb/testsuite/gdb.base/completion.exp
@@ -0,0 +1,568 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite.
+
+#
+# tests for command completion
+#
+# Here are some useful test cases for completion.  
+# They should be tested with both M-? and TAB.
+#
+#   "show output-" "radix"
+#   "show output" "-radix"
+#   "p" ambiguous (commands starting with p--path, print, printf, etc.)
+#   "p "  ambiguous (all symbols)
+#   "info t foo" no completions
+#   "info t " no completions
+#   "info t" ambiguous ("info target", "info terminal", etc.)
+#   "info ajksdlfk" no completions
+#   "info ajksdlfk " no completions
+#   "info" " "
+#   "info " ambiguous (all info commands)
+#   "p \"a" no completions (string constant)
+#   "p 'a" ambiguous (all symbols starting with a)
+#   "p b-a" ambiguous (all symbols starting with a)
+#   "p b-" ambiguous (all symbols)
+#   "file Make" "file" (word break hard to screw up here)
+#   "file ../gdb.stabs/we" "ird" (needs to not break word at slash)
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+
+#skip all these tests for now (FIXME)
+
+continue
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+        perror "tests suppressed"
+}
+
+set oldtimeout1 $timeout
+set timeout [expr $timeout + 500]
+
+
+send_gdb "hfgfh\t"
+sleep 1
+gdb_expect  {
+        -re "^hfgfh\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Undefined command: \"hfgfh\"\\.  Try \"help\"\\..*$gdb_prompt $"\
+                                        { pass "complete 'hfgfh'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'hfgfh'"}
+                      timeout           {fail "(timeout) complete 'hfgfh'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'hfgfh'" }
+        timeout         { fail "(timeout) complete 'hfgfh'" }
+        }
+
+#exp_internal 0
+
+send_gdb "show output\t"
+sleep 1
+gdb_expect  {
+        -re "^show output-radix $"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\
+                                        { pass "complete 'show output'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'show output'"}
+                      timeout           {fail "(timeout) complete 'show output'"}
+                     }
+            }
+        -re "^show output$"\
+            { send_gdb "\n"
+               gdb_expect {
+                      -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\
+                                        { fail "complete 'show output'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'show output'"}
+                      timeout           { fail "(timeout) complete 'show output'"}
+                     }
+
+             }
+
+        -re ".*$gdb_prompt $"       { fail "complete 'show output'" }
+        timeout         { fail "(timeout) complete 'show output'" }
+        }
+
+
+send_gdb "show output-\t"
+sleep 1
+gdb_expect  {
+        -re "^show output-radix $"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\
+                                        { pass "complete 'show output-'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'show output-'"}
+                      timeout           {fail "(timeout) complete 'show output-'"}
+                     }
+            }
+        -re "^show output-$"\
+            { send_gdb "\n"
+               gdb_expect {
+                      -re "Default output radix for printing of values is 10\\..*$gdb_prompt $"\
+                                        { fail "complete 'show output-'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'show output-'"}
+                      timeout           { fail "(timeout) complete 'show output-'"}
+                     }
+
+             }
+
+        -re ".*$gdb_prompt $"       { fail "complete 'show output-'" }
+        timeout         { fail "(timeout) complete 'show output-'" }
+        }
+
+send_gdb "p\t"
+sleep 1
+gdb_expect  {
+        -re "^p\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "The history is empty\\..*$gdb_prompt $"\
+                                        { pass "complete 'p'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'p'"}
+                      timeout           {fail "(timeout) complete 'p'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'p'" }
+        timeout         { fail "(timeout) complete 'p'" }
+        }
+
+send_gdb "p \t"
+sleep 1
+gdb_expect  {
+        -re "^p \\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "The history is empty\\..*$gdb_prompt $"\
+                                        { pass "complete 'p '"}
+                      -re ".*$gdb_prompt $" { fail "complete 'p '"}
+                      timeout           {fail "(timeout) complete 'p '"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'p '" }
+        timeout         { fail "(timeout) complete 'p '" }
+        }
+
+
+send_gdb "info t foo\t"
+sleep 1
+gdb_expect  {
+        -re "^info t foo\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Ambiguous info command \"t foo\": target, terminal, threads, tp, tracepoints, types\\..*$gdb_prompt $"\
+                                        { pass "complete 'info t foo'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info t foo'"}
+                      timeout           {fail "(timeout) complete 'info t foo'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info t foo'" }
+        timeout         { fail "(timeout) complete 'info t foo'" }
+        }
+
+send_gdb "info t\t"
+sleep 1
+gdb_expect  {
+        -re "^info t\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Ambiguous info command \"t\": target, terminal, threads, tp, tracepoints, types\\..
+*$gdb_prompt $"\
+                                        { pass "complete 'info t'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info t'"}
+                      timeout           {fail "(timeout) complete 'info t'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info t'" }
+        timeout         { fail "(timeout) complete 'info t'" }
+        }
+
+
+send_gdb "info t \t"
+sleep 1
+gdb_expect  {
+        -re "^info t \\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Ambiguous info command \"t \": target, terminal, threads, tp, tracepoints, types\\..
+*$gdb_prompt $"\
+                                        { pass "complete 'info t '"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info t '"}
+                      timeout           {fail "(timeout) complete 'info t '"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info t '" }
+        timeout         { fail "(timeout) complete 'info t '" }
+        }
+
+
+send_gdb "info asdfgh\t"
+sleep 1
+gdb_expect  {
+        -re "^info asdfgh\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Undefined info command: \"asdfgh\".  Try \"help info\"\\..
+*$gdb_prompt $"\
+                                        { pass "complete 'info asdfgh'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info asdfgh'"}
+                      timeout           {fail "(timeout) complete 'info asdfgh'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info asdfgh'" }
+        timeout         { fail "(timeout) complete 'info asdfgh'" }
+        }
+
+
+send_gdb "info asdfgh \t"
+sleep 1
+gdb_expect  {
+        -re "^info asdfgh \\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Undefined info command: \"asdfgh \".  Try \"help info\"\\..
+*$gdb_prompt $"\
+                                        { pass "complete 'info asdfgh '"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info asdfgh '"}
+                      timeout           {fail "(timeout) complete 'info asdfgh '"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info asdfgh '" }
+        timeout         { fail "(timeout) complete 'info asdfgh '" }
+        }
+
+send_gdb "info\t"
+sleep 1
+gdb_expect  {
+        -re "^info $"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "\"info\" must be followed by the name of an info command\\.\r\nList of info subcommands:\r\n\r\ninfo address.*info watchpoints.*\r\n\r\nType \"help info\" followed by info subcommand name for full documentation.\r\nCommand name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\
+                                        { pass "complete 'info'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info'"}
+                      timeout           {fail "(timeout) complete 'info'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info'" }
+        timeout         { fail "(timeout) complete 'info'" }
+        }
+
+send_gdb "info \t"
+sleep 1
+gdb_expect  {
+        -re "^info \\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "\"info\" must be followed by the name of an info command\\.\r\nList of info subcommands:\r\n\r\ninfo address.*Type \"help info\" followed by info subcommand name for full documentation.\r\nCommand name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\
+                                        { pass "complete 'info '"}
+                      -re ".*$gdb_prompt $" { fail "complete 'info '"}
+                      timeout           {fail "(timeout) complete 'info '"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info '" }
+        timeout         { fail "(timeout) complete 'info '" }
+        }
+
+
+send_gdb "info \t"
+sleep 1
+gdb_expect  {
+        -re "^info \0x7$"\
+            { send_gdb "\t"
+              gdb_expect {
+                      -re "address.*types.*$gdb_prompt info $"\
+                          { send_gdb "\n"
+                            gdb_expect {
+                                     -re "\"info\".*unambiguous\\..*$gdb_prompt $"\
+                                        { pass "complete (2) 'info '"}
+                                     -re ".*$gdb_prompt $" { fail "complete (2) 'info '"}
+                                     timeout           {fail "(timeout) complete (2) 'info '"}
+                                    }
+                           }
+                      -re ".*$gdb_prompt $" { fail "complete (2) 'info '"}
+                      timeout           {fail "(timeout) complete (2) 'info '"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete (2) 'info '" }
+        timeout         { fail "(timeout) complete (2) 'info '" }
+        }
+
+
+send_gdb "p \"a\t"
+sleep 1
+gdb_expect  {
+        -re "^p \"a\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Unterminated string in expression\\..*$gdb_prompt $"\
+                                        { pass "complete 'p a'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'p a'"}
+                      timeout           {fail "(timeout) complete 'p a'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'p \"a'" }
+        timeout         { fail "(timeout) complete 'p \"a'" }
+        }
+
+send_gdb "p 'a\t"
+sleep 1
+gdb_expect  {
+        -re "^p 'a\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Invalid character constant\\..*$gdb_prompt $"\
+                                        { pass "complete 'p \'a'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'p \'a'"}
+                      timeout           {fail "(timeout) complete 'p \'a'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'p \'a'" }
+        timeout         { fail "(timeout) complete 'p \'a'" }
+        }
+
+send_gdb "p 'a\t"
+sleep 1
+gdb_expect  {
+        -re "^p 'a\\\x07$"\
+            { send_gdb "\t"
+              gdb_expect {
+                      -re "a64l.*atol.*$gdb_prompt p .a$"\
+                          { send_gdb "\n"
+                            gdb_expect {
+                                     -re "Invalid character constant\\..*$gdb_prompt $"\
+                                                       { pass "complete (2) 'p \'a'"}
+                                     -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'"}
+                                     timeout           {fail "(timeout) complete (2) 'p \'a'"}
+                                   }
+                          }
+                      -re ".*$gdb_prompt $" { fail "complete (2) 'p \'a'"}
+                      timeout           {fail "(timeout) complete (2) 'p \'a'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete (2) 'p \'a'" }
+        timeout         { fail "(timeout) complete (2) 'p \'a'" }
+        }
+
+
+send_gdb "p b-a\t"
+sleep 1
+gdb_expect  {
+        -re "^p b-a\\\x07$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "No symbol \"b\" in current context\\..*$gdb_prompt $"\
+                                        { pass "complete 'p b-a'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'p b-a'"}
+                      timeout           {fail "(timeout) complete 'p b-a'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'p b-a'" }
+        timeout         { fail "(timeout) complete 'p b-a'" }
+        }
+
+send_gdb "p b-a\t"
+sleep 1
+gdb_expect  {
+        -re "^p b-a\\\x07$"\
+            { send_gdb "\t"
+              gdb_expect {
+                      -re "a64l.*atol.*$gdb_prompt p b-a$"\
+                          { send_gdb "\n"
+                            gdb_expect {
+                                     -re "No symbol \"b\" in current context\\..*$gdb_prompt $"\
+                                                       { pass "complete (2) 'p b-a'"}
+                                     -re ".*$gdb_prompt $" { fail "complete (2) 'p b-a'"}
+                                     timeout           {fail "(timeout) complete (2) 'p b-a'"}
+                                   }
+                          }
+                      -re ".*$gdb_prompt $" { fail "complete (2) 'p b-a'"}
+                      timeout           {fail "(timeout) complete (2) 'p b-a'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete (2) 'p b-a'" }
+        timeout         { fail "(timeout) complete (2) 'p b-a'" }
+        }
+
+
+send_gdb "p b-\t"
+sleep 1
+gdb_expect  {
+        -re "^p b-\\\x07$"\
+            { send_gdb "\t"
+              gdb_expect {
+                      -re "There are $decimal possibilities\\.  Do you really\r\nwish to see them all. \\(y or n\\)$"\
+                          { send_gdb "n"
+                            gdb_expect {
+                                     -re "\\(gdb\\) p b-$"\
+                                         { send_gdb "\n"
+                                           gdb_expect {
+                                                   -re "No symbol \"b\" in current context\\..*$gdb_prompt $"\
+                                                       { pass "complete (2) 'p b-'"}
+                                                   -re ".*$gdb_prompt $" { fail "complete (2) 'p b-'"}
+                                                   timeout           {fail "(timeout) complete (2) 'p b-'"}
+                                                  }
+                                          }
+                                     -re ".*$gdb_prompt $" { fail "complete (2) 'p b-'"}
+                                     timeout           {fail "(timeout) complete (2) 'p b-'"}
+                                   }
+                          }
+                      -re ".*$gdb_prompt $" { fail "complete (2) 'p b-'"}
+                      timeout           {fail "(timeout) complete (2) 'p b-'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete (2) 'p b-'" }
+        timeout         { fail "(timeout) complete (2) 'p b-'" }
+        }
+
+send_gdb "file ${objdir}/Make\t"
+sleep 1
+gdb_expect  {
+        -re "file ${objdir}/Makefile.*$"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "\r\nA program is being debugged already\\.  Kill it\\? \\(y or n\\) $"\
+                      { send_gdb "n\n"
+                        gdb_expect {
+                                -re "\r\nProgram not killed\\.\r\n$gdb_prompt $"\
+                                        { pass "complete 'file Make'"}
+                                -re ".*$gdb_prompt $" { fail "complete 'file Make'"}
+                                timeout           {fail "(timeout) complete 'file Make'"}
+                               }
+                      }
+                      -re ".*$gdb_prompt $" { fail "complete 'file Make'"}
+                      timeout           {fail "(timeout) complete 'file Make'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'file Make'" }
+        timeout         { fail "(timeout) complete 'file Make'" }
+        }
+
+
+send_gdb "file ${srcdir}/gdb.base/a1\t"
+sleep 1
+gdb_expect  {
+        -re "^file ${srcdir}/gdb.base/.*'a1.*-selftest\\.exp' $"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "\r\nA program is being debugged already\\.  Kill it\\? \\(y or n\\) $"
+\
+                      { send_gdb "n\n"
+                        gdb_expect {
+                                -re "\r\nProgram not killed\\.\r\n$gdb_prompt $"\
+                                        { pass "complete 'file gdb.base/a1'"}
+                                -re ".*$gdb_prompt $" { fail "complete 'file gdb.base/a1'"}
+                                timeout           {fail "(timeout) complete 'file gdb.base/a1'"}
+                               }
+                      }
+                      -re ".*$gdb_prompt $" { fail "complete 'file gdb.base/a1'"}
+                      timeout           {fail "(timeout) complete 'file gdb.base/a1'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'file gdb.base/a1'" }
+        timeout         { fail "(timeout) complete 'file gdb.base/a1'" }
+        }
+
+
+send_gdb "info func mark\t"
+sleep 1
+gdb_expect  {
+        -re "^info func mark.*er$"\
+            { send_gdb "\t\t"
+              sleep 3
+              gdb_expect {
+                      -re "marker1  marker2  marker3  marker4.*$gdb_prompt info func marker$"\
+                      { send_gdb "\n"
+                        gdb_expect {
+                                -re "All functions matching regular expression \"marker\":\r\n\r\nFile.*break.c:\r\nint marker1\\(\\);\r\nint marker2\\(int\\).*marker3\\(char.*char.*\\);\r\n$gdb_prompt $"\
+                                                  { pass "complete 'info func mar'"}
+                                -re ".*$gdb_prompt $" { fail "complete 'info func mar'"}
+                                timeout           {fail "(timeout) complete 'info func mar'"}
+                               }
+                      }
+                      -re ".*$gdb_prompt $" { fail "complete 'info func mar'"}
+                      timeout           {fail "(timeout) complete 'info func mar'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'info func mar'" }
+        timeout         { fail "(timeout) complete 'info func mar'" }
+        }
+
+
+send_gdb "set follow-fork-mode \t\t"
+sleep 1
+gdb_expect  {
+        -re "ask.*child.*parent.*$gdb_prompt set follow-fork-mode $"\
+            { send_gdb "\n"
+              gdb_expect {
+                      -re "Ambiguous item \"\"\\..*$gdb_prompt $"\
+                                        { pass "complete 'set follow-fork-mode'"}
+                      -re ".*$gdb_prompt $" { fail "complete 'set follow-fork-mode'"}
+                      timeout           {fail "(timeout) complete 'set follow-fork-mode'"}
+                     }
+            }
+        -re ".*$gdb_prompt $"       { fail "complete 'set follow-fork-mode'" }
+        timeout         { fail "(timeout) complete 'set follow-fork-mode'" }
+        }
+
+set timeout $oldtimeout1
+return 0
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/cond-expr.exp b/gdb/testsuite/gdb.base/cond-expr.exp
new file mode 100644
index 0000000..0e78b42
--- /dev/null
+++ b/gdb/testsuite/gdb.base/cond-expr.exp
@@ -0,0 +1,122 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+
+#
+# test of evaluation of conditional expressions, with constants and 
+# variables. Using the print and the whatis command
+# written with the only purpose in mind to cover the holes in the
+# eval.c file
+#
+# source file "int-type.c"
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "print (2 ? 3 : 4)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of cond expr (const true)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of cond expr (const true)" }
+    timeout           { fail "(timeout) print value of cond expr (const true)" }
+  }
+
+send_gdb "print (0 ? 3 : 4)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4.*$gdb_prompt $" {
+        pass "print value of cond expr (const false)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of cond expr (const false)" }
+    timeout           { fail "(timeout) print value of cond expr (const false)" }
+  }
+
+gdb_test "set variable x=14" "" "set variable x=14"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable z=3" "" "set variable z=3"
+
+send_gdb "print (x ? y : z)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of cond expr (var true)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of cond expr (var true)" }
+    timeout           { fail "(timeout) print value of cond expr (var true)" }
+  }
+
+gdb_test "set variable x=0" "" "set variable x=0"
+
+send_gdb "print (x ? y : z)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of cond expr (var false)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of cond expr (var false)" }
+    timeout           { fail "(timeout) print value of cond expr (var false)" }
+  }
+
+
+send_gdb "whatis (0 ? 3 : 4)\n"
+gdb_expect {
+    -re "type = int.*$gdb_prompt $" {
+        pass "print whatis of cond expr"
+      }
+    -re ".*$gdb_prompt $" { fail "print whatis of cond expr" }
+    timeout           { fail "(timeout) print whatis of cond expr" }
+  }
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/condbreak.c b/gdb/testsuite/gdb.base/condbreak.c
new file mode 100644
index 0000000..491d6e5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/condbreak.c
@@ -0,0 +1,81 @@
+#ifdef vxworks
+
+#  include <stdio.h>
+
+/* VxWorks does not supply atoi.  */
+static int
+atoi (z)
+     char *z;
+{
+  int i = 0;
+
+  while (*z >= '0' && *z <= '9')
+    i = i * 10 + (*z++ - '0');
+  return i;
+}
+
+/* I don't know of any way to pass an array to VxWorks.  This function
+   can be called directly from gdb.  */
+
+vxmain (arg)
+char *arg;
+{
+  char *argv[2];
+
+  argv[0] = "";
+  argv[1] = arg;
+  main (2, argv, (char **) 0);
+}
+
+#else /* ! vxworks */
+#  include <stdio.h>
+#endif /* ! vxworks */
+
+/*
+ * The following functions do nothing useful.  They are included simply
+ * as places to try setting breakpoints at.  They are explicitly
+ * "one-line functions" to verify that this case works (some versions
+ * of gcc have or have had problems with this).
+ */
+
+int marker1 () { return (0); }
+int marker2 (a) int a; { return (1); }
+void marker3 (a, b) char *a, *b; {}
+void marker4 (d) long d; {}
+
+/*
+ *	This simple classical example of recursion is useful for
+ *	testing stack backtraces and such.
+ */
+
+int
+main (argc, argv, envp)
+int argc;
+char *argv[], **envp;
+{
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    if (argc == 123456) {
+	fprintf (stderr, "usage:  factorial <number>\n");
+	return 1;
+    }
+    printf ("%d\n", factorial (atoi ("6")));
+
+    marker1 ();
+    marker2 (43);
+    marker3 ("stack", "trace");
+    marker4 (177601976L);
+    return 0;
+}
+
+int factorial (value)
+int value;
+{
+    if (value > 1) {
+	value *= factorial (value - 1);
+    }
+    return (value);
+}
+
diff --git a/gdb/testsuite/gdb.base/condbreak.exp b/gdb/testsuite/gdb.base/condbreak.exp
new file mode 100644
index 0000000..76f7521
--- /dev/null
+++ b/gdb/testsuite/gdb.base/condbreak.exp
@@ -0,0 +1,157 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This test was written by Rich Title. 
+# Purpose is to test conditional breakpoints.
+# Modeled after "break.exp".
+
+
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "condbreak"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+
+#
+# test break at function
+#
+gdb_test "break main" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "breakpoint function"
+
+# 
+# test conditional break at function
+#
+gdb_test "break marker1 if 1==1" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "break function if condition"
+
+gdb_test "delete 2" \
+    "" \
+    "delete break"
+
+#
+# test conditional break at line number
+#
+gdb_test "break 64 if 1==1" \
+    "Breakpoint.*at.* file .*$srcfile, line 64\\." \
+    "break line if condition"
+
+gdb_test "delete 3" \
+    "" \
+    "delete break"
+
+# 
+# test conditional break at function
+#
+gdb_test "break marker1 if (1==1)" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "break function if (condition)"
+
+#
+# test conditional break at line number
+#
+gdb_test "break 64 if (1==1)" \
+    "Breakpoint.*at.* file .*$srcfile, line 64\\." \
+    "break line if (condition)"
+
+gdb_test "break marker2 if (a==43)" \
+    "Breakpoint.*at.* file .*$srcfile, line.*" \
+    "break function if (condition)"
+
+#
+# check to see what breakpoints are set
+#
+
+set main_line 60
+gdb_test "info break" \
+    "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:$main_line.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker1 at .*$srcfile:41.*
+\[\t \]+stop only if 1 == 1.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in main at .*$srcfile:64.*
+\[\t \]+stop only if 1 == 1.*
+\[0-9\]+\[\t \]+breakpoint     keep y.* in marker2 at .*$srcfile:42.*
+\[\t \]+stop only if a == 43.*" \
+    "breakpoint info"
+
+
+#
+# run until the breakpoint at main is hit. For non-stubs-using targets.
+#
+gdb_test "run" \
+    "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:60.*60\[\t \]+if .argc.* \{.*" \
+"run until function breakpoint"
+
+#
+# run until the breakpoint at a line number
+#
+gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:64.*64\[\t \]+printf.*factorial.*" \
+			"run until breakpoint set at a line number"
+
+#
+# run until the breakpoint at marker1
+#
+gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker1 \\(\\) at .*$srcfile:41.*41\[\t \]+.*" \
+			"run until breakpoint at marker1"
+
+#
+# run until the breakpoint at marker2
+#
+gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, marker2 \\(a=43\\) at .*$srcfile:42.*42\[\t \]+.*" \
+			"run until breakpoint at marker2"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/configure b/gdb/testsuite/gdb.base/configure
new file mode 100644
index 0000000..29e69bf
--- /dev/null
+++ b/gdb/testsuite/gdb.base/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=a1-selftest.exp
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.base/configure.in b/gdb/testsuite/gdb.base/configure.in
new file mode 100644
index 0000000..e5bcb19
--- /dev/null
+++ b/gdb/testsuite/gdb.base/configure.in
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(a1-selftest.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.base/constvars.c b/gdb/testsuite/gdb.base/constvars.c
new file mode 100644
index 0000000..b0ce752
--- /dev/null
+++ b/gdb/testsuite/gdb.base/constvars.c
@@ -0,0 +1,183 @@
+void marker1 (void)
+{
+}
+
+/* misc. function params */
+
+int
+qux1 (const char cc, const char /*&*/ccr, const char *ccp, char *const cpc)
+{
+  return 33;
+}
+
+int
+qux2 (volatile unsigned char vuc, const volatile int cvi,
+      volatile short /*&*/vsr, volatile long *vlp, float *volatile fpv,
+      const volatile signed char *const volatile cvscpcv)
+{
+  return 400;
+}
+
+int
+main (void)
+{
+  char lave = 'B';
+  unsigned char lavish = 10;
+  short lax = 20;
+  unsigned short lecherous = 30;
+  long lechery = 40;
+  unsigned long lectern = 50;
+  float leeway = 60;
+  double legacy = 70;
+  signed char lemonade = 35;
+
+  const char            laconic = 'A';
+  const unsigned char   laggard = 1;
+  const short           lagoon = 2;
+  const unsigned short  laity = 3;
+  const long            lambent = 4;
+  const unsigned long   laminated = 5;
+  const float           lampoon = 6;
+  const double          languid = 7;
+
+  /* pointers to constant variables */
+
+  const char           *legend      = &lave;
+  const unsigned char  *legerdemain = &lavish;
+  const short          *leniency    = &lax;
+  const unsigned short *leonine     = &lecherous;
+  const long           *lesion      = &lechery;
+  const unsigned long  *lethal      = &lectern;
+  const float          *lethargic   = &leeway;
+  const double         *levity      = &legacy;
+
+  /* constant pointers to constant variables */
+
+  const char           *const lewd          = &laconic;
+  const unsigned char  *const lexicographer = &laggard;
+  const short          *const lexicon       = &lagoon;
+  const unsigned short *const liaison       = &laity;
+  const long           *const libation      = &lambent;
+  const unsigned long  *const libelous      = &laminated;
+  const float          *const libertine     = &lampoon;
+  const double         *const libidinous    = &languid;
+
+  /* this is the same as const char * legend .... */
+
+  char           const *languish   = &laconic;
+  unsigned char  const *languor    = &laggard;
+  short          const *lank       = &lagoon;
+  unsigned short const *lapidary   = &laity;
+  long           const *larceny    = &lambent;
+  unsigned long  const *largess    = &laminated;
+  float          const *lascivious = &lampoon;
+  double         const *lassitude  = &languid;
+
+  /* constant pointers to variable */
+
+  char           *const   lamprey   = &lave;
+  unsigned char  *const   lariat    = &lavish;
+  short          *const   laudanum  = &lax;
+  unsigned short *const   lecithin  = &lecherous;
+  long           *const   leviathan = &lechery;
+  unsigned long  *const   libretto  = &lectern;
+  float          *const   lissome   = &leeway;
+  double         *const   locust    = &legacy;
+
+  /* volatile variables */
+
+  volatile char vox = 'X';
+  volatile unsigned char victuals = 13;
+  volatile short vixen = 200;
+  volatile unsigned short vitriol = 300;
+  volatile long vellum = 1000;
+  volatile unsigned long valve = 2000;
+  volatile float vacuity = 3.0;
+  volatile double vertigo = 10.3;
+    
+  /* pointers to volatile variables */
+
+  volatile char           * vampire = &vox;
+  volatile unsigned char  * viper  = &victuals;
+  volatile short          * vigour = &vixen;
+  volatile unsigned short * vapour = &vitriol;
+  volatile long           * ventricle = &vellum;
+  volatile unsigned long  * vigintillion = &valve;
+  volatile float          * vocation = &vacuity;
+  volatile double         * veracity = &vertigo;
+
+  /* volatile pointers to volatile variables */
+
+  volatile char           * volatile vapidity = &vox;
+  volatile unsigned char  * volatile velocity = &victuals;
+  volatile short          * volatile veneer = &vixen;
+  volatile unsigned short * volatile video = &vitriol;
+  volatile long           * volatile vacuum = &vellum;
+  volatile unsigned long  * volatile veniality = &valve;
+  volatile float          * volatile vitality = &vacuity;
+  volatile double         * volatile voracity = &vertigo;
+
+  /* const volatile vars */
+
+  const volatile char           victor = 'Y';
+  const volatile unsigned char  vicar = 11;
+
+  /* pointers to const volatiles */
+
+  const volatile char              * victory = &victor;
+  const volatile unsigned char     * vicarage = &vicar;
+
+  /* const pointers to volatile vars */
+
+  volatile char                    * const vein = &vox;
+  volatile unsigned char           * const vogue = &victuals;
+
+  /* const pointers to const volatile vars */
+
+  const volatile char              * const cavern = &victor;
+  const volatile unsigned char     * const coverlet = &vicar;
+
+  /* volatile pointers to const vars */
+
+  const char                       * volatile caveat = &laconic;
+  const unsigned char              * volatile covenant = &laggard;
+
+  /* volatile pointers to const volatile vars */
+
+  const volatile char              * volatile vizier = &victor;
+  const volatile unsigned char     * volatile vanadium = &vicar;
+
+  /* const volatile pointers */
+
+  char                             * const volatile vane = &lave;
+  unsigned char                    * const volatile veldt = &lavish;
+
+  /* const volatile pointers to const vars */
+
+  const char                       * const volatile cove = &laconic;
+  const unsigned char              * const volatile cavity = &laggard;
+    
+  /* const volatile pointers to volatile vars */
+
+  volatile char                    * const volatile vagus = &vox;
+  volatile unsigned char           * const volatile vagrancy = &victuals;
+    
+  /* const volatile pointers to const volatile */
+
+  const volatile char              * const volatile vagary = &victor;
+  const volatile unsigned char     * const volatile vendor = &vicar;
+
+  /* misc. references */
+  /*
+  const char           & radiation = laconic;
+  volatile signed char & remuneration = lemonade;
+  */
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+  marker1 ();
+    
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/constvars.exp b/gdb/testsuite/gdb.base/constvars.exp
new file mode 100644
index 0000000..518e5ca
--- /dev/null
+++ b/gdb/testsuite/gdb.base/constvars.exp
@@ -0,0 +1,251 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (elz@apollo.hp.com)
+#
+# This file is part of the gdb testsuite
+#
+# tests for const variables
+#           const pointers to vars
+#           pointers to const variables
+#           const pointers to const vars
+# with mixed types
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "constvars"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "Break.* marker1__.* \\(\\) at .*:$decimal.*$gdb_prompt $" {
+	    fail "continue to marker1 (demangling)"
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+# test function parameters
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+send_gdb "ptype qux1\n"
+gdb_expect {
+    -re "type = int \\(const char, const char &, const char *, char * const\\).*$gdb_prompt $" {
+        pass "ptype qux1"
+    }
+    -re ".*$gdb_prompt $" { fail "ptype qux1" }
+    timeout           { fail "(timeout) ptype qux1" }
+}   
+
+# test vars and pointers
+
+proc do_constvar_tests {} {
+    global gcc_compiled
+
+    gdb_test "print lave" " = 66 'B'"
+    gdb_test "ptype lave" "type = char"
+    gdb_test "print lavish" " = 10 '\\\\n'"
+    gdb_test "ptype lavish" "type = unsigned char"
+    gdb_test "print lax" " = 20"
+    gdb_test "ptype lax" "type = short.*"
+    gdb_test "print lecherous" " = 30"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lecherous" "type = unsigned short.*"
+    gdb_test "print lechery" " = 40"
+    gdb_test "ptype lechery" "type = long.*"
+    gdb_test "print lectern" " = 50"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lectern" "type = unsigned long.*"
+    gdb_test "print leeway" " = 60"
+    gdb_test "ptype leeway" "type = float"
+    gdb_test "print legacy" " = 70"
+    gdb_test "ptype legacy" "type = double"
+    gdb_test "print laconic" " = 65 'A'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype laconic" "type = const char"
+    gdb_test "print laggard" " = 1 '.001'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype laggard" "type = const unsigned char"
+    gdb_test "print lagoon" " = 2"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lagoon" "type = const short"
+    gdb_test "print laity" " = 3"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype laity" "type = const unsigned short"
+    gdb_test "print lambent" " = 4"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lambent" "type = const long"
+    gdb_test "print laminated" " = 5"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype laminated" "type = const unsigned long"
+    gdb_test "print lampoon" " = 6"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lampoon" "type = const float"
+    gdb_test "print languid" " = 7"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype languid" "type = const double"
+    gdb_test "print *legend" " = 66 'B'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype legend" "type = const char *"
+    gdb_test "print *legerdemain" " = 10 '\\\\n'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype legerdemain" "type = const unsigned char *"
+    gdb_test "print *leniency" " = 20"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype leniency" "type = const short *"
+    gdb_test "print *leonine" " = 30"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype leonine" "type = const unsigned short *"
+    gdb_test "print *lesion" " = 40"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lesion" "type = const long *"
+    gdb_test "print *lethal" " = 50"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lethal" "type = const unsigned long *"
+    gdb_test "print *lethargic" " = 60"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lethargic" "type = const float *"
+    gdb_test "print *levity" " = 70"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype levity" "type = const double *"
+    gdb_test "print *lewd" " = 65 'A'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lewd" "type = const char * const"
+    gdb_test "print *lexicographer" " = 1 '.001'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lexicographer" "type = const unsigned char * const"
+    gdb_test "print *lexicon" " = 2"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lexicon" "type = const short * const"
+    gdb_test "print *liaison" " = 3"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype liaison" "type = const unsigned short * const"
+    gdb_test "print *libation" " = 4"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype libation" "type = const long * const"
+    gdb_test "print *libelous" " = 5"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype libelous" "type = const unsigned long * const"
+    gdb_test "print *libertine" " = 6"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype libertine" "type = const float * const"
+    gdb_test "print *libidinous" " = 7"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype libidinous" "type = const double * const"
+    gdb_test "print *languish" " = 65 'A'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype languish" "type = const char *"
+    gdb_test "print *languor" " = 1 '.001'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype languor" "type = const unsigned char *"
+    gdb_test "print *lank" " = 2"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lank" "type = const short *"
+    gdb_test "print *lapidary" " = 3"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lapidary" "type = const unsigned short *"
+    gdb_test "print *larceny" " = 4"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype larceny" "type = const long *"
+    gdb_test "print *largess" " = 5"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype largess" "type = const unsigned long *"
+    gdb_test "print *lascivious" " = 6"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lascivious" "type = const float *"
+    gdb_test "print *lassitude" " = 7"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lassitude" "type = const double *"
+    gdb_test "print *lamprey" " = 66 'B'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lamprey" "type = char * const"
+    gdb_test "print *lariat" " = 10 '\\\\n'"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lariat" "type = unsigned char * const"
+    gdb_test "print *laudanum" " = 20"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype laudanum" "type = short * const"
+    gdb_test "print *lecithin" " = 30"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lecithin" "type = unsigned short * const"
+    gdb_test "print *leviathan" " = 40"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype leviathan" "type = long * const"
+    gdb_test "print *libretto" " = 50"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype libretto" "type = unsigned long * const"
+    gdb_test "print *lissome" " = 60"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype lissome" "type = float * const"
+    gdb_test "print *locust" " = 70"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype locust" "type = double * const"
+    if {$gcc_compiled} then { setup_xfail "*-*-*" }
+    gdb_test "ptype radiation" "type = const char &"
+}
+
+do_constvar_tests
diff --git a/gdb/testsuite/gdb.base/corefile.exp b/gdb/testsuite/gdb.base/corefile.exp
new file mode 100644
index 0000000..83b78c4
--- /dev/null
+++ b/gdb/testsuite/gdb.base/corefile.exp
@@ -0,0 +1,223 @@
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+set testfile "coremaker"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# Create a core file named "corefile" rather than just "core", to
+# avoid problems with sys admin types that like to regularly prune all
+# files named "core" from the system.
+#
+# Arbitrarily try setting the core size limit to "unlimited" since
+# this does not hurt on systems where the command does not work and
+# allows us to generate a core on systems where it does.
+#
+# Some systems append "core" to the name of the program; others append
+# the name of the program to "core".
+set found 0
+catch "system \"(cd ${objdir}/${subdir}; ulimit -c unlimited; ${binfile}; true) >/dev/null 2>&1\""
+#      remote_exec host "${binfile}"
+foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" {
+    if [remote_file build exists $i] {
+	remote_exec build "mv $i ${objdir}/${subdir}/corefile"
+	set found 1
+    }
+}
+if { $found == 0 } {
+    # The braindamaged HPUX shell quits after the ulimit -c above
+    # without executing ${binfile}.  So we try again without the
+    # ulimit here if we didn't find a core file above.
+    # Oh, I should mention that any "braindamaged" non-Unix system has
+    # the same problem. I like the cd bit too, it's really neat'n stuff.
+    catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\""
+    foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" {
+	if [remote_file build exists $i] {
+	    remote_exec build "mv $i ${objdir}/${subdir}/corefile"
+	    set found 1
+	}
+    }
+    
+    if { $found == 0  } {
+	warning "can't generate a core file - core tests suppressed - check ulimit -c"
+	return 0
+    }
+}
+
+#
+# Test that we can simply startup with a "-core=corefile" command line arg
+# and recognize that the core file is a valid, usable core file.
+# To do this, we must shutdown the currently running gdb and restart
+# with the -core args.  We can't use gdb_start because it looks for
+# the first gdb prompt, and the message we are looking for occurs
+# before the first prompt.  Also, we can't include GDBFLAGS because
+# if it is empty, this confuses gdb with an empty argument that it
+# grumbles about (said grumbling currently being ignored in gdb_start).
+# **FIXME**
+#
+# Another problem is that on some systems (solaris for example), there
+# is apparently a limit on the length of a fully specified path to 
+# the coremaker executable, at about 80 chars.  For this case, consider
+# it a pass, but note that the program name is bad.
+
+gdb_exit
+if $verbose>1 then {
+    send_user "Spawning $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile\n"
+}
+
+set oldtimeout $timeout
+set timeout [expr "$timeout + 60"]
+verbose "Timeout is now $timeout seconds" 2
+eval "spawn $GDB -nw $GDBFLAGS -core=$objdir/$subdir/corefile"
+expect {
+    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
+	pass "args: -core=corefile"
+    }
+    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
+	pass "args: -core=corefile (with bad program name)"
+    }
+    -re ".*registers from core file: File in wrong format.* $" {
+	fail "args: -core=corefile (could not read registers from core file)"
+    }
+    -re ".*$gdb_prompt $"	{ fail "args: -core=corefile" }
+    timeout 		{ fail "(timeout) starting with -core" }
+}
+
+
+#
+# Test that startup with both an executable file and -core argument.
+# See previous comments above, they are still applicable.
+#
+
+close;
+
+if $verbose>1 then {
+    send_user "Spawning $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile\n"
+}
+
+
+eval "spawn $GDB -nw $GDBFLAGS $binfile -core=$objdir/$subdir/corefile";
+expect {
+    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
+	pass "args: execfile -core=corefile"
+    }
+    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $"	 {
+	pass "args: execfile -core=corefile (with bad program name)"
+    }
+    -re ".*registers from core file: File in wrong format.* $" {
+	fail "args: execfile -core=corefile (could not read registers from core file)"
+    }
+    -re ".*$gdb_prompt $"	{ fail "args: execfile -core=corefile" }
+    timeout 		{ fail "(timeout) starting with -core" }
+}
+set timeout $oldtimeout
+verbose "Timeout is now $timeout seconds" 2
+
+close;
+
+# Now restart normally.
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Test basic corefile recognition via core-file command.
+
+send_gdb "core-file $objdir/$subdir/corefile\n"
+gdb_expect {
+    -re "Core was generated by .*coremaker.*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
+	pass "core-file command"
+    }
+    -re "Core was generated by .*\r\n\#0  .*\(\).*\r\n$gdb_prompt $" {
+	pass "core-file command (with bad program name)"
+    }
+    -re ".*registers from core file: File in wrong format.* $" {
+	fail "core-file command (could not read registers from core file)"
+    }
+    -re ".*$gdb_prompt $"	{ fail "core-file command" }
+    timeout 		{ fail "(timeout) core-file command" }
+}
+
+# Test correct mapping of corefile sections by printing some variables.
+
+gdb_test "print coremaker_data" "\\\$$decimal = 202"
+gdb_test "print coremaker_bss" "\\\$$decimal = 10"
+gdb_test "print coremaker_ro" "\\\$$decimal = 201"
+
+if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+gdb_test "print func2::coremaker_local" "\\\$$decimal = {0, 1, 2, 3, 4}"
+
+# Somehow we better test the ability to read the registers out of the core
+# file correctly.  I don't think the other tests do this.
+
+gdb_test "bt" "abort.*func2.*func1.*main.*" "backtrace in corefile.exp"
+
+# Test ability to read mmap'd data
+
+gdb_test "x/8bd buf1" ".*:.*0.*1.*2.*3.*4.*5.*6.*7" "accessing original mmap data in core file"
+setup_xfail "*-*-sunos*" "*-*-ultrix*" "*-*-aix*"
+send_gdb "x/8bd buf2\n"
+gdb_expect {
+    -re ".*:.*0.*1.*2.*3.*4.*5.*6.*7.*$gdb_prompt $" {
+	pass "accessing mmapped data in core file"
+    }
+    -re "0x\[f\]*:.*Cannot access memory at address 0x\[f\]*.*$gdb_prompt $" {
+	fail "accessing mmapped data (mapping failed at runtime)"
+    }
+    -re "0x.*:.*Cannot access memory at address 0x.*$gdb_prompt $" {
+	fail "accessing mmapped data (mapping address not found in core file)"
+    }
+    -re ".*$gdb_prompt $" {
+	fail "accessing mmapped data (incorrect data found in core file)"
+    }
+    timeout {
+	fail "accessing mmapped data (timeout)"
+    }
+}
+
+# test reinit_frame_cache
+
+gdb_load ${binfile}
+setup_xfail "*-*-*"
+gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(\\)" "up in corefile.exp"
+
+gdb_test "core" "No core file now."
diff --git a/gdb/testsuite/gdb.base/coremaker.c b/gdb/testsuite/gdb.base/coremaker.c
new file mode 100644
index 0000000..56239e9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/coremaker.c
@@ -0,0 +1,120 @@
+/* Simple little program that just generates a core dump from inside some
+   nested function calls. */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+#include <signal.h>
+
+#ifndef __STDC__
+#define	const	/**/
+#endif
+
+#define MAPSIZE (8 * 1024)
+
+/* Don't make these automatic vars or we will have to walk back up the
+   stack to access them. */
+
+char *buf1;
+char *buf2;
+
+int coremaker_data = 1;	/* In Data section */
+int coremaker_bss;	/* In BSS section */
+
+const int coremaker_ro = 201;	/* In Read-Only Data section */
+
+/* Note that if the mapping fails for any reason, we set buf2
+   to -1 and the testsuite notices this and reports it as
+   a failure due to a mapping error.  This way we don't have
+   to test for specific errors when running the core maker. */
+
+void
+mmapdata ()
+{
+  int j, fd;
+  extern void *malloc ();
+
+  /* Allocate and initialize a buffer that will be used to write
+     the file that is later mapped in. */
+
+  buf1 = (char *) malloc (MAPSIZE);
+  for (j = 0; j < MAPSIZE; ++j)
+    {
+      buf1[j] = j;
+    }
+
+  /* Write the file to map in */
+
+  fd = open ("coremmap.data", O_CREAT | O_RDWR, 0666);
+  if (fd == -1)
+    {
+      perror ("coremmap.data open failed");
+      buf2 = (char *) -1;
+      return;
+    }
+  write (fd, buf1, MAPSIZE);
+
+  /* Now map the file into our address space as buf2 */
+
+  buf2 = (char *) mmap (0, MAPSIZE, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0);
+  if (buf2 == (char *) -1)
+    {
+      perror ("mmap failed");
+      return;
+    }
+
+  /* Verify that the original data and the mapped data are identical.
+     If not, we'd rather fail now than when trying to access the mapped
+     data from the core file. */
+
+  for (j = 0; j < MAPSIZE; ++j)
+    {
+      if (buf1[j] != buf2[j])
+	{
+	  fprintf (stderr, "mapped data is incorrect");
+	  buf2 = (char *) -1;
+	  return;
+	}
+    }
+}
+
+void
+func2 ()
+{
+  int coremaker_local[5];
+  int i;
+
+#ifdef SA_FULLDUMP
+  /* Force a corefile that includes the data section for AIX.  */
+  {
+    struct sigaction sa;
+
+    sigaction (SIGABRT, (struct sigaction *)0, &sa);
+    sa.sa_flags |= SA_FULLDUMP;
+    sigaction (SIGABRT, &sa, (struct sigaction *)0);
+  }
+#endif
+
+  /* Make sure that coremaker_local doesn't get optimized away. */
+  for (i = 0; i < 5; i++)
+    coremaker_local[i] = i;
+  coremaker_bss = 0;
+  for (i = 0; i < 5; i++)
+    coremaker_bss += coremaker_local[i];
+  coremaker_data = coremaker_ro + 1;
+  abort ();
+}
+
+void
+func1 ()
+{
+  func2 ();
+}
+
+main ()
+{
+  mmapdata ();
+  func1 ();
+}
+
diff --git a/gdb/testsuite/gdb.base/crossload.exp b/gdb/testsuite/gdb.base/crossload.exp
new file mode 100644
index 0000000..26bb7a1
--- /dev/null
+++ b/gdb/testsuite/gdb.base/crossload.exp
@@ -0,0 +1,380 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+# Rob Savoye changed it to use gdb_test (rob@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# FIXME: The configure.in for this test should look for --with-targets
+# and deal accordingly.  Until that has been done, skip the whole thing.
+# With a minimal bfd (the default), few if any of these tests work.
+
+verbose "FIXME: all the crossload tests ignored"
+return
+
+foreach i "m68k-elf m68k-aout m68k-aout2 mips-ecoff i486-elf sparc-aout i860-elf sparc-elf" {
+    remote_exec build "cd ${objdir}/${subdir} ; uudecode ${srcdir}/${subdir}/$i.u "
+}
+
+# FIXME: These tests don't work for the i960, because
+# bfd/config/i960-bout.mt sets SELECT_VECS.  I could use setup_xfail
+# for each test, but rebooting the board between each one takes a long
+# time so I'm just punting the whole file.
+if [istarget "i960-*-*"] then {
+    if $verbose>1 then {
+	warning "FIXME: crossload test case doesn't run on the i960."
+    }
+    continue
+}
+
+# FIXME: These tests don't work for the a29k, because SELECT_VECS is
+# used when compiling bfd.  It would be nice if there were some better
+# way of detecting this case.
+if [istarget "a29k-*-*"] then {
+    if $verbose>1 then {
+	warning "FIXME: crossload test case doesn't run on the a29k."
+    }
+    continue
+}
+
+# Test if gdb can automatically determine the bfd format of an
+# executable and read it's symbols.
+
+proc bfddefault {} {
+    global GDB
+    global GDBFLAGS
+    global gdb_prompt
+    global objdir
+    global subdir
+    global binfile
+    global bfdformat
+    global file_loaded
+
+    gdb_unload
+    set file_loaded 0
+    send_gdb "file $objdir/$subdir/$binfile\n"
+    gdb_expect {
+	-re "A program is being debugged already.  Kill it.*y or n." {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" {
+	    pass "$binfile ($bfdformat) auto format"
+	}
+	-re "Reading symbols from $objdir/$subdir/$binfile\[.\]+.no debugging symbols found.\[.\]+done\..*$gdb_prompt $" {
+	    pass "$binfile ($bfdformat) auto format (but no symbols found)"
+	}
+	-re "File format not recognized.*$gdb_prompt $" {
+	    fail "$binfile ($bfdformat) auto format (format not recognized)"
+	    return
+	}
+	-re "File format is ambiguous.*$gdb_prompt $" {
+	    fail "$binfile ($bfdformat) auto format (format is ambiguous)"
+	    return
+	}
+	-re "$gdb_prompt $" {
+	    fail "$binfile ($bfdformat) auto format"
+	    return
+	}
+	timeout {
+	    fail "(timeout) $binfile ($bfdformat) auto format"
+	    return
+	}	
+    }
+
+    if [gdb_test "info target" ".*file type $bfdformat" ""]==0 then {
+	set file_loaded 1
+    } else {
+	fail "$binfile ($bfdformat) wrong format found"
+    }
+}
+
+# Test if gdb can read symbols from an executable when the bfd format
+# is explicitly set via the environment variable GNUTARGET.
+
+proc bfdexplicit {} {
+    global GDB
+    global GDBFLAGS
+    global gdb_prompt
+    global subdir
+    global objdir
+    global det_file
+    global binfile
+    global bfdformat
+    global file_loaded
+
+    gdb_unload
+    set file_loaded 0
+
+    # Once GDB 4.10 (the last to lack `set gnutarget') is forgotten,
+    # change this to use set gnutarget.
+   if [gdb_test "set env GNUTARGET=$bfdformat" "" ""]!=0 then {
+       fail "setting GNUTARGET=$bfdformat in environment"
+       return
+    }
+
+    send_gdb "file $objdir/$subdir/$binfile\n"
+    gdb_expect {
+	-re "A program is being debugged already.  Kill it.*y or n." {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re "Reading symbols from $objdir/$subdir/$binfile\[.\]+done\..*$gdb_prompt $" {
+	    pass "$binfile ($bfdformat) explicit format"
+	}
+	-re "Invalid target.*$gdb_prompt $" {
+	    fail "$binfile ($bfdformat) explicit format (invalid target)"
+	    return
+	}
+	-re "$gdb_prompt $" {
+	    fail "$binfile ($bfdformat) explicit format"
+	    return
+	}
+	timeout {
+	    fail "(timeout) $binfile ($bfdformat) explicit format"
+	    return
+	}	
+    }
+
+    set file_loaded 1
+}
+
+proc test_ptype_functions {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+    global det_file
+    send_gdb "ptype main\n"
+    gdb_expect {
+	-re "type = int \[)(\]+\r\n$gdb_prompt $" {}
+	timeout { fail "(timeout) $binfile ($bfdformat) function main" ; return }
+    }
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_char_func" "type =(\ unsigned\ |\ signed\ |\ )char \[)(\]+" }\
+	        { "ptype v_short_func" "type = (short|short int) \[)(\]+" } \
+                { "ptype v_int_func" "type = int \[)(\]+" } \
+                { "ptype v_long_func" "type = (long|long int|int) \[)(\]+" } \
+                { "ptype v_float_func" "type = float \[)(\]+" } \
+                { "ptype v_double_func" "type = double \[)(\]+" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" function types"
+	    return
+	}
+    }
+    pass "$binfile ($bfdformat) ptype function types"
+}
+
+# Note that plain chars can be either signed or unsigned.
+
+proc test_ptype_plain_types {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_char" "type =(\ unsigned\ |\ signed\ |\ )char" }\
+	        { "ptype v_short" "type = short" } \
+                { "ptype v_int" "type = int" } \
+                { "ptype v_long" "type = long" } \
+                { "ptype v_float" "type = float" } \
+                { "ptype v_double" "type = double" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" plain C types"
+	    return
+    }
+    }
+    pass "$binfile ($bfdformat) ptype plain C types"
+}
+
+# Note that if compiled with pre-ANSI compilers, the "signed" keywords are
+# defined away and the variables default to plain types.  So accept either.
+
+proc test_ptype_signed_types {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+    global det_file
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_signed_char" "type =(\ signed\ |\ )char" }\
+	        { "ptype v_signed_short"  "type =(\ signed\ |\ )short" } \
+                { "ptype v_signed_int" "type =(\ signed\ |\ )int" } \
+                { "ptype v_signed_long" "type =(\ signed\ |\ )long" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    if [expr [string match "ecoff-bigmips" $bfdformat]+[string match "ptype v_signed_char" [lindex $i 0]]]==2 then {
+		setup_xfail "*-*-*"
+	    }
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" signed C types"
+	    return
+	}
+    }
+    pass "$binfile ($bfdformat) ptype signed C types"
+}
+
+proc test_ptype_unsigned_types {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+    global det_file
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_unsigned_char" "type = unsigned char" }\
+	        { "ptype v_unsigned_short" \
+		  "type = (unsigned short|short unsigned int)" } \
+                { "ptype v_unsigned_int" "type = unsigned int" } \
+                { "ptype v_unsigned_long" \
+		  "type = (unsigned long|long unsigned int)" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" unsigned C types"
+	    return
+	}
+    }
+    pass "$binfile ($bfdformat) ptype unsigned C types"
+}
+
+# Note that plain chars can be either signed or unsigned.
+
+proc test_ptype_array_types {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+    global det_file
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_char_array" "type =(\ unsigned\ |\ signed\ |\ )char \\\[2\\\]" }\
+	        { "ptype v_short_array"  \
+		  "type = (short|short int) \\\[2\\\]" } \
+                { "ptype v_int_array" "type = int \\\[2\\\]" } \
+                { "ptype v_long_array" "type = (long|long int) \\\[2\\\]" } \
+                { "ptype v_float_array" "type = float \\\[2\\\]" } \
+                { "ptype v_double_array" "type = double \\\[2\\\]" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" C array types"
+	    return
+	}
+    }
+    pass "$binfile ($bfdformat) ptype C array types"
+}
+
+proc test_ptype_pointer_types {} {
+    global gdb_prompt
+    global binfile
+    global bfdformat
+    global det_file
+
+    # set up a list of lists of command and patterns
+    set command [list { "ptype v_char_pointer" "type =(\ unsigned\ |\ signed\ |\ )char \*" }\
+	        { "ptype v_short_pointer"  "type = (short|short int) \*" } \
+                { "ptype v_int_pointer" "type = int \*" } \
+                { "ptype v_long_pointer" "type = (long|long int) \*" } \
+                { "ptype v_float_pointer" "type = float \*" } \
+                { "ptype v_double_pointer" "type = double \*" } ]
+
+    foreach i $command {
+	if [gdb_test [lindex $i 0] [lindex $i 1] ""] then {
+	    fail "$binfile ($bfdformat) \"[lindex $i 0]\" C pointer types"
+	    return
+	}
+    }
+    pass "$binfile ($bfdformat) ptype C pointer types"
+}
+
+proc loadandtest { args } {
+    global verbose
+    global GDB
+    global GDBFLAGS
+    global gdb_prompt
+    global subdir
+    global objdir
+    global binfile
+    global bfdformat
+    global file_loaded
+
+    set binfile [ lindex $args 0 ]
+    set bfdformat [ lindex $args 1 ]
+    set fixme [ lindex $args 2 ]
+
+    if ![file exists $objdir/$subdir/$binfile] then {
+        perror "$objdir/$subdir/$binfile does not exist"
+	return 0
+    }
+    gdb_exit
+    gdb_start
+    if $fixme then { setup_xfail "*-*-*" }
+    bfddefault
+    if $fixme then { setup_xfail "*-*-*" }
+    if [string match $bfdformat "elf-big"] then {
+	if [string match $binfile "i860-elf"] then {
+	    setup_xfail "*-*-*"
+	}
+    }
+    bfdexplicit
+    if $file_loaded==1 then {
+	test_ptype_functions
+        if $fixme then { setup_xfail "*-*-*" }
+	test_ptype_plain_types
+        if $fixme then { setup_xfail "*-*-*" }
+	test_ptype_signed_types
+        if $fixme then { setup_xfail "*-*-*" }
+	test_ptype_unsigned_types
+        if $fixme then { setup_xfail "*-*-*" }
+	test_ptype_array_types
+        if $fixme then { setup_xfail "*-*-*" }
+	test_ptype_pointer_types
+    }
+}
+
+# Run tests for each of the test executables.
+# If the third argument is 1, the tests will be expected to fail.
+# We should extract the information about available tests and bfd formats
+# from the makefile or some other control file (FIXME).
+
+loadandtest m68k-elf	"elf32-m68k"		0
+
+# I'm getting an XPASS for explicit format on this one
+loadandtest m68k-aout	"a.out-newsos3"		1
+
+loadandtest m68k-aout2	"a.out-sunos-big"	0
+loadandtest mips-ecoff	"ecoff-bigmips"		0
+loadandtest i486-elf	"elf32-i386"		0
+loadandtest sparc-aout	"a.out-sunos-big"	0
+loadandtest sparc-elf	"elf32-sparc"		0
+
+#FIXME:  i860 support is unlikely to be working in the near future
+# so suppress this test until it is working.  -fnf
+#loadandtest i860-elf	"elf32-i860"		0
+
+gdb_test "set gnutarget auto" ""
diff --git a/gdb/testsuite/gdb.base/d10v.ld b/gdb/testsuite/gdb.base/d10v.ld
new file mode 100644
index 0000000..3c4c38a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/d10v.ld
@@ -0,0 +1,155 @@
+OUTPUT_FORMAT("elf32-d10v", "elf32-d10v",
+	      "elf32-d10v")
+OUTPUT_ARCH(d10v)
+ENTRY(_start)
+ SEARCH_DIR(/usr/cygnus/d10v-961230/H-sparc-sun-sunos4.1//lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Overlay sections: */
+  .ovly0  0x01010000 : AT (0x12010000) { foo.o(.text)  }
+  .ovly1  0x01010000 : AT (0x12011000) { bar.o(.text)  }
+  .ovly2  0x01011000 : AT (0x12012000) { baz.o(.text)  }
+  .ovly3  0x01011000 : AT (0x12013000) { grbx.o(.text) }
+  .data00 0x00001000 : AT (0x12014000) { foo.o(.data)  }
+  .data01 0x00001000 : AT (0x12015000) { bar.o(.data)  }
+  .data02 0x00002000 : AT (0x12016000) { baz.o(.data)  }
+  .data03 0x00002000 : AT (0x12017000) { grbx.o(.data) }
+  /* Read-only sections, merged into data segment: */
+  . = 0x00000004;
+  .interp     : { *(.interp) 	}
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.init      : { *(.rel.init)	}
+  .rela.init     : { *(.rela.init)	}
+  .rel.fini      : { *(.rel.fini)	}
+  .rela.fini     : { *(.rela.fini)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .plt      : { *(.plt)	}
+  .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
+  .rodata1   : { *(.rodata1) }
+  /* Adjust the address for the data segment.  */
+  . = ALIGN(4);
+  .data    :
+  {
+    *(.data)
+    *(.gnu.linkonce.d*)
+    _ovly_table = .; 
+	LONG(ABSOLUTE(ADDR(.ovly0)));
+	LONG(SIZEOF(.ovly0));
+	LONG(LOADADDR(.ovly0));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.ovly1)));
+	LONG(SIZEOF(.ovly1));
+	LONG(LOADADDR(.ovly1));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.ovly2)));
+	LONG(SIZEOF(.ovly2));
+	LONG(LOADADDR(.ovly2));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.ovly3)));
+	LONG(SIZEOF(.ovly3));
+	LONG(LOADADDR(.ovly3));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.data00)));
+	LONG(SIZEOF(.data00));
+	LONG(LOADADDR(.data00));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.data01)));
+	LONG(SIZEOF(.data01));
+	LONG(LOADADDR(.data01));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.data02)));
+	LONG(SIZEOF(.data02));
+	LONG(LOADADDR(.data02));
+	LONG(0);
+	LONG(ABSOLUTE(ADDR(.data03)));
+	LONG(SIZEOF(.data03));
+	LONG(LOADADDR(.data03));
+	LONG(0);
+    _novlys = .;
+	LONG((_novlys - _ovly_table) / 16);
+    CONSTRUCTORS
+  }
+  .data1   : { *(.data1) }
+  .ctors         :
+  {
+    *(.ctors)
+  }
+  .dtors         :
+  {
+    *(.dtors)
+  }
+  .got           : { *(.got.plt) *(.got) }
+  .dynamic       : { *(.dynamic) }
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata     : { *(.sdata) }
+  _edata  =  .;
+  PROVIDE (edata = .);
+  __bss_start = .;
+  .sbss      : { *(.sbss) *(.scommon) }
+  .bss       :
+  {
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+  /* DWARF debug sections.
+     Symbols in the .debug DWARF section are relative to the beginning of the
+     section so we begin .debug at 0.  It's not clear yet what needs to happen
+     for the others.   */
+  .debug          0 : { *(.debug) }
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  .line           0 : { *(.line) }
+  /* These must appear regardless of  .  */
+  /* Hmmm, there's got to be a better way.  This sets the stack to the
+     top of the simulator memory (i.e. top of 64K data space). */
+  .stack 0x00007FFE : { _stack = .; *(.stack) }
+  .text    0x1000000 :
+  {
+    *(.init)
+    *(.fini)
+    *(.text)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+  } =0
+  _etext = .;
+  PROVIDE (etext = .);
+}
diff --git a/gdb/testsuite/gdb.base/d10vovly.c b/gdb/testsuite/gdb.base/d10vovly.c
new file mode 100644
index 0000000..bdb90fe
--- /dev/null
+++ b/gdb/testsuite/gdb.base/d10vovly.c
@@ -0,0 +1,225 @@
+
+/*
+ * Ovlymgr.c -- Runtime Overlay Manager for the GDB testsuite.
+ */
+
+#include "ovlymgr.h"
+
+/* Local functions and data: */
+
+extern unsigned long _ovly_table[][4];
+extern unsigned long _novlys __attribute__ ((section (".data")));
+enum ovly_index { VMA, SIZE, LMA, MAPPED};
+
+static void ovly_copy (unsigned long dst, unsigned long src, long size);
+
+/* Flush the data and instruction caches at address START for SIZE bytes.
+   Support for each new port must be added here.  */
+/* FIXME: Might be better to have a standard libgloss function that
+   ports provide that we can then use.  Use libgloss instead of newlib
+   since libgloss is the one intended to handle low level system issues.
+   I would suggest something like _flush_cache to avoid the user's namespace
+   but not be completely obscure as other things may need this facility.  */
+ 
+static void
+FlushCache (void)
+{
+#ifdef __M32R__
+  volatile char *mspr = (char *) 0xfffffff7;
+  *mspr = 1;
+#endif
+}
+
+/* OverlayLoad:
+ * Copy the overlay into its runtime region,
+ * and mark the overlay as "mapped".
+ */
+
+bool
+OverlayLoad (unsigned long ovlyno)
+{
+  unsigned long i;
+
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);	/* fail, bad ovly number */
+
+  if (_ovly_table[ovlyno][MAPPED])
+    return TRUE;	/* this overlay already mapped -- nothing to do! */
+
+  for (i = 0; i < _novlys; i++)
+    if (i == ovlyno)
+      _ovly_table[i][MAPPED] = 1;	/* this one now mapped */
+    else if (_ovly_table[i][VMA] == _ovly_table[ovlyno][VMA])
+      _ovly_table[i][MAPPED] = 0;	/* this one now un-mapped */
+
+  ovly_copy (_ovly_table[ovlyno][VMA], 
+	     _ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][SIZE]);
+
+  FlushCache ();
+
+  return TRUE;
+}
+
+/* OverlayUnload:
+ * Copy the overlay back into its "load" region.
+ * Does NOT mark overlay as "unmapped", therefore may be called
+ * more than once for the same mapped overlay.
+ */
+ 
+bool
+OverlayUnload (unsigned long ovlyno)
+{
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);  /* fail, bad ovly number */
+ 
+  if (!_ovly_table[ovlyno][MAPPED])
+    exit (-1);  /* error, can't copy out a segment that's not "in" */
+ 
+  ovly_copy (_ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][VMA],
+	     _ovly_table[ovlyno][SIZE]);
+
+  return TRUE;
+}
+
+#ifdef __D10V__
+#define IMAP0       (*(short *)(0xff00))
+#define IMAP1       (*(short *)(0xff02))
+#define DMAP        (*(short *)(0xff04))
+
+static void
+D10VTranslate (unsigned long logical,
+	       short *dmap,
+	       unsigned long **addr)
+{
+  unsigned long physical;
+  unsigned long seg;
+  unsigned long off;
+
+  /* to access data, we use the following mapping 
+     0x00xxxxxx: Logical data address segment        (DMAP translated memory)
+     0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
+     0x10xxxxxx: Physical data memory segment        (On-chip data memory)
+     0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
+     0x12xxxxxx: Phisical unified memory segment     (Unified memory)
+     */
+
+  /* Addresses must be correctly aligned */
+  if (logical & (sizeof (**addr) - 1))
+    exit (-1);
+
+  /* If the address is in one of the two logical address spaces, it is
+     first translated into a physical address */
+  seg = (logical >> 24);
+  off = (logical & 0xffffffL);
+  switch (seg) 
+      {
+      case 0x00: /* in logical data address segment */
+	if (off <= 0x7fffL)
+	  physical = (0x10L << 24) + off;
+	else
+	  /* Logical address out side of on-chip segment, not
+             supported */
+	  exit (-1);
+	break;
+      case 0x01: /* in logical instruction address segment */
+	{
+	  short map;
+	  if (off <= 0x1ffffL)
+	    map = IMAP0;
+	  else if (off <= 0x3ffffL)
+	    map = IMAP1;
+	  else
+	    /* Logical address outside of IMAP[01] segment, not
+	       supported */
+	    exit (-1);
+	  if (map & 0x1000L)
+	    {
+	    /* Instruction memory */
+	      physical = (0x11L << 24) | off;
+	    }
+	  else
+	    {
+	    /* Unified memory */
+	      physical = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
+	      if (physical > 0xffffffL)
+		/* Address outside of unified address segment */
+		exit (-1);
+	      physical |= (0x12L << 24);
+	    }
+	  break;
+	}
+      case 0x10:
+      case 0x11:
+      case 0x12:
+	physical = logical;
+	break;
+      default:
+	exit (-1);	/* error */
+      }
+
+  seg = (physical >> 24);
+  off = (physical & 0xffffffL);
+  switch (seg) 
+    {
+    case 0x10:	/* dst is a 15 bit offset into the on-chip memory */
+      *dmap = 0;
+      *addr = (long *) (0x0000 + ((short)off & 0x7fff));
+      break;
+    case 0x11:	/* dst is an 18-bit offset into the on-chip
+		   instruction memory */
+      *dmap = 0x1000L | ((off & 0x3ffffL) >> 14);
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    case 0x12:	/* dst is a 24-bit offset into unified memory */
+      *dmap = off >> 14;
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    default:
+      exit (-1);	/* error */
+    }
+}
+#endif /* __D10V__ */
+
+static void
+ovly_copy (unsigned long dst, unsigned long src, long size)
+{
+#ifdef  __M32R__
+  memcpy ((void *) dst, (void *) src, size);
+  return;
+#endif /* M32R */
+
+#ifdef  __D10V__
+  unsigned long *s, *d, tmp;
+  short dmap_src, dmap_dst;
+  short dmap_save;
+
+  /* all section sizes should by multiples of 4 bytes */
+  dmap_save = DMAP;
+
+  D10VTranslate (src, &dmap_src, &s);
+  D10VTranslate (dst, &dmap_dst, &d);
+
+  while (size > 0)
+    {
+      /* NB: Transfer 4 byte (long) quantites, problems occure
+	 when only two bytes are transfered */
+      DMAP = dmap_src;
+      tmp = *s;
+      DMAP = dmap_dst;
+      *d = tmp; 
+      d++;
+      s++;
+      size -= sizeof (tmp);
+      src += sizeof (tmp);
+      dst += sizeof (tmp);
+      if ((src & 0x3fff) == 0)
+	D10VTranslate (src, &dmap_src, &s);
+      if ((dst & 0x3fff) == 0)
+	D10VTranslate (dst, &dmap_dst, &d);
+    }
+  DMAP = dmap_save;
+#endif /* D10V */
+}
+
diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp
new file mode 100644
index 0000000..8e1506a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/default.exp
@@ -0,0 +1,793 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997, 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+
+set timeout 60
+
+#
+# test default actions of gdb commands
+#
+
+#load_lib gdb.exp
+
+gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
+
+setup_xfail "mips-idt-*"
+send_gdb "attach\n"
+gdb_expect {
+    -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
+			{ pass "attach" }
+    -re "You can't do that when your target is `None'.*$gdb_prompt $"\
+			{ pass "attach" }
+    -re "Don't know how to attach.  Try \"help target\"..*$gdb_prompt $"\
+			{ pass "attach" }
+    -re "Kill it. .y or n." {
+	send_gdb "y\n"
+	exp_continue
+    }
+    -re "$gdb_prompt $" { fail "attach" }
+    timeout { fail "(timeout) attach" }
+}
+
+# FIXME: attach kills the udi connection
+if { [istarget "a29k-*-udi"] } {
+    gdb_exit
+    gdb_start
+}
+
+if ![target_info exists use_gdb_stub] {
+    gdb_test "break" "No default breakpoint address now." "break"
+    foreach i "b br bre brea" {
+	gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
+    }
+
+    
+    setup_xfail "mips-idt-*" "a29k-*-udi"
+    gdb_test "backtrace" "No stack."
+    foreach i "bt ba bac" {
+	setup_xfail "mips-idt-*" "a29k-*-udi"
+	gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
+    }
+} else {
+    warning "Skipping backtrace and break tests because of GDB stub."
+}
+
+# This works on the MIPS IDT board, but confuses future tests.
+if ![istarget "mips-idt-*"] then {
+    setup_xfail "a29k-*-udi"
+    gdb_test "continue" "The program is not being run." "continue"
+    setup_xfail "a29k-*-udi"
+    gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
+}
+
+# FIXME: continue kills the udi connection
+if [istarget "a29k-*-udi"] then {
+    gdb_exit
+    gdb_start
+}
+
+#test call
+gdb_test "call" "The history is empty..*" "call"
+
+
+#test catch
+gdb_test "catch" "Catch requires an event name..*" "catch"
+
+#test cd
+gdb_test "cd" "Argument required .new working directory.*" "cd"
+
+#test clear
+gdb_test "clear" "No source file specified..*" "clear"
+
+#test commands
+gdb_test "commands" "No breakpoint number 0..*" "commands"
+
+#test condition
+gdb_test "condition" "Argument required .breakpoint number.*" "condition"
+
+#test core-file
+gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
+#test delete "d" abbreviation
+gdb_test "d" "" "delete \"d\" abbreviation"
+#test delete
+gdb_test "delete" "" "delete"
+#test define
+gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
+#test delete breakpoints
+gdb_test "delete breakpoints" "" "delete breakpoints"
+#test delete display
+# FIXME -- need to dump full output to detailed log
+send_gdb "delete display\n"
+gdb_expect {
+    -re "Delete all auto-display expressions.*y or n. $" {
+	send_gdb "y\n"
+	gdb_expect {
+	    -re "$gdb_prompt $"     { pass "delete display prompt" }
+	    timeout		{ fail "(timeout) delete display prompt" }
+	}
+    }
+    timeout		{ fail "(timeout) delete display prompt" }
+
+}
+
+#test detach
+gdb_test "detach" "" "detach"
+
+# FIXME: continue kills the udi connection
+if [istarget "a29k-*-udi"] then {
+    gdb_exit
+    gdb_start
+}
+if [istarget "h8300-*-hms"] then {
+    gdb_exit
+    gdb_start
+}
+
+#test directory
+# FIXME -- need to dump full output to detailed log
+
+send_gdb "directory\n"
+gdb_expect {
+    -re "Reinitialize source path to empty.*y or n. $"  {
+	send_gdb "y\n"
+	gdb_expect {
+	    -re "Source directories searched: .cdir:.cwd.*$gdb_prompt $"\
+		    { pass "directory prompt" }
+	    timeout		{ fail "(timeout) directory prompt" }
+	}
+    }
+}
+
+#test disable "dis" abbreviation
+gdb_test "dis" "" "disable \"dis\" abbreviation"
+#test disable "disa" abbreviation
+gdb_test "disa" "" "disable \"disa\" abbreviation"
+#test disable
+gdb_test "disable" "" "disable"
+#test disable breakpoints
+gdb_test "disable breakpoints" "" "disable breakpoints"
+#test disable display
+gdb_test "disable display" "" "disable display"
+#test disassemble
+gdb_test "disassemble" "No frame selected." "disassemble"
+#test display
+gdb_test "display" "" "display"
+#test do
+gdb_test "do" "No stack." "do"
+#test document
+gdb_test "document" "Argument required .name of command to define.*" "document"
+#test down
+gdb_test "down" "No stack.*" "down"
+#test down-silently
+gdb_test "down-silently" "No stack." "down-silently"
+#test echo
+gdb_test "echo" "" "echo"
+#test enable breakpoints delete
+gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
+#test enable breakpoints once
+gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
+#test enable breakpoints
+gdb_test "enable breakpoints" "" "enable breakpoints"
+#test enable delete
+gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
+#test enable display
+gdb_test "enable display" "" "enable display"
+#test enable once
+gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
+#test enable
+gdb_test "enable" "" "enable"
+#test exec-file
+send_gdb "exec-file\n"
+gdb_expect {
+    -re "No executable file now..*$gdb_prompt $" {
+	pass "exec-file"
+    }
+    -re "exec-file.*A program is being debugged already.  Kill it. .y or n.*$" {
+	send_gdb "n\n"
+	if $verbose>1 then {
+	    send_user "\tDidn't kill program being debugged\n"
+	}
+	gdb_expect -re "$gdb_prompt $" { }
+	pass "exec-file"
+    }
+    -re "$gdb_prompt $"	{ fail "exec-file" }
+    timeout		{ fail "(timeout) exec-file" }
+}
+
+#test frame "f" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "f" "No stack." "frame \"f\" abbreviation"
+#test frame
+setup_xfail "a29k-*-udi"
+gdb_test "frame" "No stack." "frame"
+#test fg
+setup_xfail "a29k-*-udi"
+gdb_test "fg" "The program is not being run." "fg"
+# FIXME: fg kills the udi connection
+#test file
+send_gdb "file\n"
+gdb_expect {
+    -re "No executable file now..*$gdb_prompt $"\
+	    { pass "file" }
+    -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
+	send_gdb "n\n"
+	if $verbose>1 then {
+	    send_user "\t\tDidn't kill program being debugged\n"
+	}
+	gdb_expect -re "$gdb_prompt $" { }
+	pass "file"
+    }
+    -re ".*$gdb_prompt $"	{ fail "file" }
+    timeout		{ fail "(timeout) file" }
+}
+
+#test finish
+setup_xfail "a29k-*-udi"
+gdb_test "finish" "The program is not running." "finish"
+#test forward-search
+# The message here comes from the regexp library, not gdb, and so can
+# vary on different systems.
+gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
+#test help "h" abbreviation
+gdb_test "h" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
+#test help
+gdb_test "help" "List of classes of commands:.*\[\r\n\]+aliases -- Aliases of other commands.*\[\r\n\]+breakpoints -- Making program stop at certain points.*\[\r\n\]+data -- Examining data.*\[\r\n\]+files -- Specifying and examining files.*\[\r\n\]+obscure -- Obscure features.*\[\r\n\]+running -- Running the program.*\[\r\n\]+stack -- Examining the stack.*\[\r\n\]+status -- Status inquiries.*\[\r\n\]+support -- Support facilities.*\[\r\n\]+user-defined -- User-defined commands.*\[\r\n\]+Type \"help\" followed by a class name for a list of commands in that class..*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help"
+#test handle
+gdb_test "handle" "Argument required .signal to handle.*" "handle"
+#test info "i" abbreviation 
+gdb_test "i" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
+#test info
+gdb_test "info" "\"info\" must be followed by the name of an info command..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "info"
+#test ignore
+gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
+#test info address
+gdb_test "info address" "Argument required." "info address"
+#test info all-registers
+setup_xfail "a29k-*-udi"
+gdb_test "info all-registers" "The program has no registers now." "info all-registers"
+#test info args
+gdb_test "info args" "No frame selected." "info args"
+#test info bogus-gdb-command
+gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\".  Try \"help info\".*" "info bogus-gdb-command"
+#test info breakpoints
+gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
+#test info catch
+gdb_test "info catch" "You can't do that without a process to debug." "info catch"
+#test info copying
+# FIXME -- doesn't work worth a shit
+#send_gdb "info copying"
+#	-re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."# 
+gdb_test "info copying"
+#	}
+#
+#
+#test info display
+gdb_test "info display" "There are no auto-display expressions now." "info display"
+#test info frame "f" abbreviation
+gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
+#test info frame
+gdb_test "info frame" "No stack.|No selected frame." "info frame"
+#test info files
+gdb_test "info files" "" "info files"
+#test info float
+if [istarget "arm-*-*"] then {
+    gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
+} elseif [istarget "thumb-*-*"] then {
+    gdb_test "info float" "Software FPU type.*mask:.*flags:.*" "info float"
+} else {
+    gdb_test "info float" "No floating point info available for this processor." "info float"
+}
+#test info functions
+gdb_test "info functions" "All defined functions:" "info functions"
+#test info locals
+gdb_test "info locals" "No frame selected." "info locals"
+#test info program
+setup_xfail "a29k-*-udi"
+gdb_test "info program" "The program being debugged is not being run." "info program"
+#test info registers
+setup_xfail "a29k-*-udi"
+gdb_test "info registers" "The program has no registers now." "info registers"
+#test info stack "s" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
+#test info stack
+setup_xfail "a29k-*-udi"
+gdb_test "info stack" "No stack." "info stack"
+#test info set
+# FIXME -- needs to match the entire output
+gdb_test "info set" "confirm:  Whether to confirm potentially dangerous operations is o\[a-z\]*..*\[\r\n\]+history filename:  The filename in which to record the command history is .*\[\r\n\]+listsize:  Number of source lines gdb will list by default is 10.*" "info set"
+gdb_test "info symbol" "Argument required .address.."
+#test info source
+gdb_test  "info source" "No current source file..*" "info source"
+#test info sources
+gdb_test "info sources" "No symbol table is loaded.  Use the \"file\" command.*" "info sources"
+#test info target
+gdb_test "info target" "" "info target"
+#test info terminal
+gdb_test "info terminal" "No saved terminal information." "info terminal"
+#test info types
+gdb_test "info types" "All defined types:" "info types"
+#test info variables
+gdb_test "info variables" "All defined variables:" "info variables"
+#test info warranty
+gdb_test "info warranty" "NO WARRANTY.*\[\r\n\]+  *11.  *BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY.*\[\r\n\]+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN.*\[\r\n\]+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES.*\[\r\n\]+PROVIDE THE PROGRAM \"AS IS\" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED.*\[\r\n\]+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF.*\[\r\n\]+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS.*\[\r\n\]+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE.*\[\r\n\]+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,.*\[\r\n\]+REPAIR OR CORRECTION..*\[\r\n\]+  *12.  *IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING.*\[\r\n\]+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR.*\[\r\n\]+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,.*\[\r\n\]+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING.*\[\r\n\]+OUT OF THE USE OR INABILITY TO USE THE PROGRAM .INCLUDING BUT NOT LIMITED.*\[\r\n\]+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY.*\[\r\n\]+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER.*\[\r\n\]+PROGRAMS., EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE.*\[\r\n\]+POSSIBILITY OF SUCH DAMAGES.*" "info warranty"
+#test info watchpoints
+gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
+#test inspect
+gdb_test "inspect" "The history is empty." "inspect"
+#test jump
+setup_xfail "a29k-*-udi"
+gdb_test "jump" "The program is not being run." "jump"
+#test kill
+gdb_test "kill" "The program is not being run." "kill"
+#test list "l" abbreviation
+gdb_test "l" "No symbol table is loaded.  Use the \"file\" command.*" "list \"l\" abbreviation"
+#test list
+gdb_test "list" "No symbol table is loaded.  Use the \"file\" command.*" "list"
+#test load
+# The ``takes a file name'' case is for vxgdb.
+# The ``Use the "file" command'' case is for newer GDB versions which try
+# to deduce the filename from the exec file.
+gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
+#test next "n" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
+#test next
+setup_xfail "a29k-*-udi"
+gdb_test "next" "The program is not being run." "next"
+#test nexti "ni" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
+#test nexti
+setup_xfail "a29k-*-udi"
+gdb_test "nexti" "The program is not being run." "nexti"
+#test output
+gdb_test "output" "Argument required .expression to compute.*" "output"
+
+#test overlay
+gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
+#test a non-existant overlay subcommand
+gdb_test "overlay on"     "Undefined overlay command.* Try \"help overlay\"."
+gdb_test "overlay manual" "" "overlay manual #1"
+gdb_test "overlay auto"   ""
+gdb_test "overlay off"    ""
+gdb_test "overlay list"   "No sections are mapped."
+gdb_test "overlay map"    "Overlay debugging not enabled.*" "overlay map #1"
+gdb_test "overlay unmap"  "Overlay debugging not enabled.*" "overlay unmap #2"
+gdb_test "overlay manual" "" "overlay manual #2"
+gdb_test "overlay map"    "Argument required: name of an overlay section." "overlay map #2"
+gdb_test "overlay unmap"  "Argument required: name of an overlay section." "overlay unmap #2"
+
+#test print "p" abbreviation
+gdb_test "p" "The history is empty." "print \"p\" abbreviation"
+#test print
+gdb_test "print" "The history is empty." "print"
+#test printf
+gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
+#test ptype
+gdb_test "ptype" "The history is empty." "ptype"
+#test pwd
+gdb_test "pwd" "Working directory .*" "pwd"
+
+#test run "r" abbreviation
+if [istarget "*-*-vxworks*"] then {
+    gdb_test "set args" "" "" 
+
+    gdb_test "r" "Starting program: .*
+You must specify a function name to run, and arguments if any"\
+		"run \"r\" abbreviation"
+    gdb_test "set args main" "" "" 
+
+} else {
+    send_gdb "r\n"
+    gdb_expect {
+	    -re "Starting program:  .*
+You can't do that when your target is `None'.*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re "Starting program:  .*
+No executable file specified.*
+Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re "Starting program:  .*
+No image loaded into target.*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re "Starting program:  .*
+No program loaded.*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re ".*$gdb_prompt $"	{ fail "run \"r\" abbreviation" }
+	    timeout		{ fail "(timeout) run \"r\" abbreviation" }
+	}
+}
+
+#test run
+if [istarget "*-*-vxworks*"] then {
+    gdb_test "set args" "" "" 
+
+    gdb_test "run" "Starting program: .*
+You must specify a function name to run, and arguments if any"
+    gdb_test "set args main" "" "" 
+
+} else {
+    send_gdb "run\n"
+    gdb_expect {
+	    -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
+	    -re "Starting program:  .*
+No executable file specified.*
+Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
+			{ pass "run" }
+	    -re "Starting program:  .*
+No image loaded into target.*$gdb_prompt $"\
+			{ pass "run" }
+	    -re "Starting program:  .*
+No program loaded.*$gdb_prompt $"\
+			{ pass "run \"r\" abbreviation" }
+	    -re "Don't know how to run.  Try \"help target\"..*$gdb_prompt $"\
+			{ pass "run" }
+	    -re ".*$gdb_prompt $"	{ fail "run" }
+	    timeout		{ fail "(timeout) run" }
+	}
+}
+
+#test rbreak
+gdb_test "rbreak" "" "rbreak"
+
+#test return
+# The middle case accommodates the a29k, where doing the "ni" above causes
+# an initial stack to be created.
+gdb_test "return" "No selected frame..*" "return"  "Make .* return now.*y or n. $" "y"
+
+
+#test reverse-search
+gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
+#test step "s" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
+#test step
+setup_xfail "a29k-*-udi"
+gdb_test "step" "The program is not being run." "step #1"
+#test search
+gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
+#test section
+gdb_test "section" "Must specify section name and its virtual address.*" "section"
+#test set annotate
+gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
+#test set args
+gdb_test "set args" "" "set args"
+#test set check "c" abbreviation
+gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
+#test set check "ch" abbreviation
+gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
+#test set check
+gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand..*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set check"
+#test set check range
+gdb_test "set check range" "" "set check range"
+#test set check type
+gdb_test "set check type" "" "set check type"
+#test set complaints
+gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
+#test set confirm
+gdb_test "set confirm" "" "set confirm"
+# Don't test set editing. What if we're talking to a gdb that
+# won't do editing correctly while we're talking to it?
+# gdb_test "set editing" "" "set editing"
+
+#test set environment
+gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
+#test set height
+gdb_test "set height" "Argument required .integer to set it to.*" "set height"
+#test set history expansion
+gdb_test "set history expansion" "" "set history expansion"
+#test set history filename
+gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
+#test set history save
+gdb_test "set history save" "" "set history save"
+#test set history size
+gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
+#test set history
+gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set history"
+#test set language
+gdb_test "set language" "The currently understood settings are:.*\[\r\n\]+local or auto  *Automatic setting based on source file.*\[\r\n\]+c  *Use the C language.*\[\r\n\]+c\[+\]+  *Use the C\[+\]+ language.*\[\r\n\]+modula-2  *Use the Modula-2 language.*" "set language"
+#test set listsize
+gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
+#test set print "p" abbreviation
+gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
+#test set print "pr" abbreviation
+gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
+#test set print
+gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "set print"
+#test set print address
+gdb_test "set print address" "" "set print address"
+#test set print array
+gdb_test "set print array" "" "set print array"
+#test set print asm-demangle
+gdb_test "set print asm-demangle" "" "set print asm-demangle"
+#test set print demangle
+gdb_test "set print demangle" "" "set print demangle"
+#test set print elements
+gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
+#test set print object
+gdb_test "set print object" "" "set print object"
+#test set print pretty
+gdb_test "set print pretty" "" "set print pretty"
+#test set print sevenbit-strings
+gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
+#test set print union
+gdb_test "set print union" "" "set print union"
+#test set print vtbl
+gdb_test "set print vtbl" "" "set print vtbl"
+# FIXME -- need a test for "set prompt"
+#test set radix
+gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
+#test set symbol-reloading
+gdb_test "set symbol-reloading" "" "set symbol-reloading"
+#test set variable
+gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
+#test set verbose
+gdb_test "set verbose" "" "set verbose"
+#test set width
+gdb_test "set width" "Argument required .integer to set it to.*" "set width"
+#test set write
+# This is only supported on targets which use exec.o.
+gdb_test "set write" "" "set write"
+#test set
+gdb_test "set" "Argument required .expression to compute.*" "set"
+#test shell echo Hi dad!
+gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
+#test show annotate
+gdb_test "show annotate" "Annotation_level is 0." 	 "show annotate"
+#test show args
+gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
+#test show check "c" abbreviation
+gdb_test "show c" "range:  *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
+#test show check "ch" abbreviation
+gdb_test "show ch" "range: *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
+#test show check
+gdb_test "show check" "range:  *Range checking is \"auto; currently off\"..*\[\r\n\]+type:  *Type checking is \"auto; currently off\"." "show check"
+#test show check range
+gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
+#test show check type
+gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
+#test show commands
+gdb_test "show commands" "" "show commands"
+#test show complaints
+gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
+#test show confirm
+gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
+#test show convenience
+gdb_test "show convenience" "No debugger convenience variables now defined..*\[\r\n\]+Convenience variables have names starting with \".\";.*\[\r\n\]+use \"set\" as in \"set .foo = 5\" to define them." "show convenience"
+#test show directories
+gdb_test "show directories" "Source directories searched: .cdir:.cwd" "show directories"
+#test show editing
+gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
+#test show height
+gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
+#test show history expansion
+gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
+#test show history filename
+gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
+#test show history save
+gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
+#test show history size
+gdb_test "show history size" "The size of the command history is.*" "show history size"
+#test show history
+gdb_test "show history" "expansion:  *History expansion on command input is o.*\[\r\n\]+filename:  *The filename in which to record the command history is.*.gdb_history.*\[\r\n\]+save: *Saving of the history record on exit is o.*\[\r\n\]+size: * The size of the command history is.*" "show history"
+#test show language
+gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
+#test show listsize
+gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
+#test show print "p" abbreviation
+gdb_test "show p" ".*" "show p"
+#test show print "pr" abbreviation
+gdb_test "show pr" ".*" "show pr"
+#test show print
+gdb_test "show print" "" "show print"
+#test show paths
+gdb_test "show paths" "Executable and object file path:.*" "show paths"
+#test show print address
+gdb_test "show print address" "Printing of addresses is on." "show print address"
+#test show print array
+gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
+#test show print asm-demangle
+gdb_test "show print asm-demangle" "Demangling of C\[+\]+ names in disassembly listings is on." "show print asm-demangle"
+#test show print demangle
+gdb_test "show print demangle" "Demangling of encoded C\[+\]+ names when displaying symbols is on." "show print demangle"
+#test show print elements
+gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
+#test show print object
+gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
+#test show print pretty
+gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
+#test show print sevenbit-strings
+gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
+#test show print union
+gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
+#test show print vtbl
+gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
+#test show prompt
+# In the FAIL case, can't just look for $gdb_prompt because that will match
+# the output, rather than the prompt. So look for $gdb_prompt at the start
+# of a line.
+gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
+#test show radix
+gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
+#test show symbol-reloading
+gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
+#test show user
+gdb_test "show user" "" "show user"
+#test show values
+gdb_test "show values" "" "show values"
+#test show verbose
+gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
+#test show version
+
+gdb_test "show version" "GNU gdb \[0-9\.\]*.*\[\r\n\]+Copyright \[0-9\]* Free Software Foundation, Inc.*\[\r\n\]+GDB is free software, covered by the GNU General Public License, and you are.*\[\r\n\]+welcome to change it and/or distribute copies of it under certain conditions.*\[\r\n\]+Type \"show copying\" to see the conditions.*\[\r\n\]+There is absolutely no warranty for GDB.  Type \"show warranty\" for details.*\[\r\n\]+This GDB was configured as .*|GDB is free software and you are welcome to distribute copies of it.*\[\r\n\]+ under certain conditions; type \"show copying\" to see the conditions..*\[\r\n\]+There is absolutely no warranty for GDB; type \"show warranty\" for details..*\[\r\n\]+GDB.*Copyright \[0-9\]* Free Software Foundation, Inc.*" "show version"
+#test show width
+gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
+#test show write
+# This is only supported on targets which use exec.o.
+gdb_test "show write" "Writing into executable and core files is o.*" "show write"
+#test show
+gdb_test "show" "confirm:  *Whether to confirm potentially dangerous operations is on..*\[\r\n\]+history filename:  *The filename in which to record the command history is .*\[\r\n\]+history save:  *Saving of the history record on exit is on..*\[\r\n\]+history size:  *The size of the command history is.*\[\r\n\]+listsize:  *Number of source lines gdb will list by default is 10.*\[\r\n\]+print elements:  *Limit on string chars or array elements to print is 200..*" "show"
+#test stepi "si" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test  "si" "The program is not being run." "stepi \"si\" abbreviation"
+#test stepi
+setup_xfail "a29k-*-udi"
+gdb_test "stepi" "The program is not being run." "stepi"
+#test signal
+setup_xfail "a29k-*-udi"
+gdb_test "signal" "The program is not being run." "signal"
+#test source
+gdb_test "source" "source command requires pathname of file to source..*|No such file or directory.*" "source"
+#test step "s" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
+#test step
+setup_xfail "a29k-*-udi"
+gdb_test "step" "The program is not being run." "step #2"
+#test symbol-file
+gdb_test "symbol-file" "" "symbol-file"
+
+#test target child
+gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\".  *Try \"help target\".*" "target child"
+
+#test target procfs
+gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\".  *Try \"help target\".*" "target procfs"
+
+#test target core
+send_gdb "target core\n"
+gdb_expect {
+    -re "No core file specified..*$gdb_prompt $" { pass "target core" }
+    -re ".*A program is being debugged already.  Kill it. .y or n.*$" {
+	send_gdb "n\n"
+	if $verbose>1 then {
+	    send_user "\t\tDidn't kill program being debugged\n"
+	}
+	gdb_expect -re "$gdb_prompt $" { }
+	pass "target core"
+    }
+    -re "Undefined target command: \"core\".  Try \"help target\"..*$gdb_prompt $" { pass "target core" }
+    -re ".*$gdb_prompt $"	{ fail "target core" }
+    timeout		{ fail "(timeout) target core" }
+}
+
+#test target exec
+send_gdb "target exec\n"
+gdb_expect {
+	-re "No executable file now..*$gdb_prompt $"\
+			{ pass "target exec" }
+	-re ".*A program is being debugged already.  Kill it. .y or n.*$" {
+	    send_gdb "n\n"
+	    if $verbose>1 then {
+		send_user "\t\tDidn't kill program being debugged\n"
+	    }
+	    gdb_expect -re "$gdb_prompt $" { }
+	    pass "target exec"
+	}
+	-re ".*$gdb_prompt $"	{ fail "target exec" }
+	timeout		{ fail "(timeout) target exec" }
+	}
+
+#test target remote
+if ![istarget "*-*-udi*"] then {
+    send_gdb "target remote\n"
+    gdb_expect {
+	-re "To open a remote debug connection, you need to specify what.*
+serial device is attached to the remote system .e.g. /dev/ttya.*$gdb_prompt $"\
+			{ pass "target remote" }
+	-re ".*A program is being debugged already.  Kill it. .y or n.*$" {
+	    send_gdb "n\n"
+	    if $verbose>1 then {
+		send_user "\t\tDidn't kill program being debugged\n"
+	    }
+	    gdb_expect -re "$gdb_prompt $" { }
+	    pass "target remote"
+	}
+	-re ".*$gdb_prompt $"	{ fail "target remote" }
+	timeout		{ fail "(timeout) target remote" }
+    }
+}
+
+#test target
+gdb_test "target" "Argument required .target name.*" "target"
+#test tbreak
+gdb_test "tbreak" "No default breakpoint address now." "tbreak"
+#test tty
+gdb_test "tty" "Argument required .terminal name for running target process.*" "tty"
+#test until "u" abbreviation
+setup_xfail "a29k-*-udi"
+gdb_test "u" "The program is not running." "until \"u\" abbreviation"
+#test until
+setup_xfail "a29k-*-udi"
+gdb_test "until" "The program is not running." "until"
+#test undisplay
+# FIXME -- need to dump full output to detailed log
+send_gdb "undisplay\n"
+gdb_expect {
+    -re "Delete all auto-display expressions.*y or n. $" {
+	send_gdb "y\n"
+	gdb_expect {
+	    -re "$gdb_prompt $" { pass "undisplay prompt" }
+	    timeout { fail "(timeout) (timeout) undisplay prompt"    }
+	}
+    }
+    timeout		{ fail "(timeout) (timeout) undisplay prompt" }
+}
+
+#test unset environment
+send_gdb "unset environment\n"
+gdb_expect {
+    -re "Delete all environment variables?.*y or n. $" { 
+	send_gdb "y\n"
+	gdb_expect {
+	    -re "$gdb_prompt $" { pass "unset environmentprompt" }
+	    timeout {
+		fail "(timeout) (timeout) unset environment prompt"
+	    }
+	}
+    }
+    timeout { 
+	fail "(timeout) (timeout) unset environment prompt"
+    }
+}
+
+#test unset
+gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand..*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "unset"
+#test up
+#test up-silently
+gdb_test "up-silently" "No stack." "up-silently"
+#test watch
+gdb_test "watch" "Argument required .expression to compute.*" "watch"
+#test whatis
+gdb_test "whatis" "The history is empty." "whatis"
+#test where
+setup_xfail "a29k-*-udi"
+gdb_test "where" "No stack." "where"
+#test x
+#The case in which it prints a number is for vxgdb.
+gdb_test "x" "0x0:.*0x\[0-9\]*|0x0:.*Cannot access memory at address 0x0." "x"
+
+gdb_exit
diff --git a/gdb/testsuite/gdb.base/define.exp b/gdb/testsuite/gdb.base/define.exp
new file mode 100644
index 0000000..1cd06a9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/define.exp
@@ -0,0 +1,304 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni. (ezannoni@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+global usestubs
+
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then { fail "define tests suppressed" }
+
+# Verify that GDB allows a user to define their very own commands.
+#
+send_gdb "define nextwhere\n"
+gdb_expect {
+  -re "Type commands for definition of \"nextwhere\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "next\nbt\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "define user command: nextwhere"}
+             timeout {fail "(timeout) define user command: nextwhere"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define user command: nextwhere"}
+  timeout {fail "(timeout) define user command: nextwhere"}
+}
+
+# Verify that those commands work as gdb_expected.
+#
+send_gdb "nextwhere\n"
+gdb_expect {
+  -re ".*64\[ \t\]*printf.*#0\[ \t\]*main.*:64.*$gdb_prompt $"\
+          {pass "use user command: nextwhere"}
+  -re "$gdb_prompt $"\
+          {fail "use user command: nextwhere"}
+  timeout {fail "(timeout) use user command: nextwhere"}
+}
+
+# Verify that a user can define a command whose spelling is a
+# proper substring of another user-defined command.
+#
+send_gdb "define nextwh\n"
+gdb_expect {
+  -re "Type commands for definition of \"nextwh\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "next 2\nbt\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "define user command: nextwh"}
+             timeout {fail "(timeout) define user command: nextwh"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define user command: nextwh"}
+  timeout {fail "(timeout) define user command: nextwh"}
+}
+
+# Verify that a user can redefine their commands.  (Test both the
+# confirmed and unconfirmed cases.)
+#
+send_gdb "define nextwhere\n"
+gdb_expect {
+  -re "Redefine command \"nextwhere\".*y or n. $"\
+          {send_gdb "n\n"
+           gdb_expect {
+             -re "Command \"nextwhere\" not redefined.*$gdb_prompt $"\
+                     {pass "redefine user command aborted: nextwhere"}
+             -re "$gdb_prompt $"\
+                     {fail "redefine user command aborted: nextwhere"}
+             timeout {fail "(timeout) redefine user command aborted: nextwhere"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "redefine user command aborted: nextwhere"}
+  timeout {fail "(timeout) redefine user command aborted: nextwhere"}
+}
+
+send_gdb "define nextwhere\n"
+gdb_expect {
+  -re "Redefine command \"nextwhere\".*y or n. $"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re "Type commands for definition of \"nextwhere\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+                     {send_gdb "bt\nnext\nend\n"
+                      gdb_expect {
+                        -re "$gdb_prompt $"\
+                                {pass "redefine user command: nextwhere"}
+                        timeout {fail "(timeout) redefine user command: nextwhere"}
+                      }
+                     }
+             timeout {fail "(timeout) redefine user command: nextwhere"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "redefine user command: nextwhere"}
+  timeout {fail "(timeout) redefine user command: nextwhere"}
+}
+
+# Verify that GDB gracefully handles an attempt to redefine the
+# help text for a builtin command.
+#
+send_gdb "document step\n"
+gdb_expect {
+  -re "Command \"step\" is built-in..*$gdb_prompt $"\
+          {pass "redocumenting builtin command disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "redocumenting builtin command disallowed"}
+  timeout {fail "(timeout) redocumenting builtin command disallowed"}
+}
+
+# Verify that a user can document their own commands.  (And redocument
+# them.)
+#
+send_gdb "document nextwhere\n"
+gdb_expect {
+  -re "Type documentation for \"nextwhere\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "A next command that frist shows you where you're stepping from.\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "document user command: nextwhere"}
+             timeout {fail "(timeout) document user command: nextwhere"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "documenting user command: nextwhere"}
+  timeout {fail "(timeout) documenting user command: nextwhere"}
+}
+
+send_gdb "document nextwhere\n"
+gdb_expect {
+  -re "Type documentation for \"nextwhere\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "A next command that first shows you where you're stepping from.\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "document user command: nextwhere"}
+             timeout {fail "(timeout) document user command: nextwhere"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "documenting user command: nextwhere"}
+  timeout {fail "(timeout) documenting user command: nextwhere"}
+}
+
+send_gdb "help nextwhere\n"
+gdb_expect {
+  -re "A next command that first shows you where you're stepping from.\r\n$gdb_prompt $"\
+          {pass "help user command: nextwhere"}
+  -re "$gdb_prompt $"\
+          {fail "help user command: nextwhere"}
+  timeout {fail "(timeout) help user command: nextwhere"}
+}
+
+# Verify that the user can "hook" a builtin command.  We choose to
+# hook the "stop" pseudo command, and we'll define it to use a user-
+# define command.
+#
+send_gdb "define user-bt\n"
+gdb_expect {
+  -re "Type commands for definition of \"user-bt\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "bt\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                       {pass "define user command: user-bt"}
+             timeout {fail "(timeout) define user command: user-bt"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define user command: user-bt"}
+  timeout {fail "(timeout) define user command: user-bt"}
+}
+
+send_gdb "define hook-stop\n"
+gdb_expect {
+  -re "Type commands for definition of \"hook-stop\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+          {send_gdb "user-b\nend\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                       {pass "define hook-stop command"}
+             timeout {fail "(timeout) define hook-stop command"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define hook-stop command"}
+  timeout {fail "(timeout) define hook-stop command"}
+}
+
+send_gdb "next\n"
+gdb_expect {
+  -re "#0\[ \t\]*main.*:66.*$gdb_prompt $"\
+          {pass "use hook-stop command"}
+  -re "$gdb_prompt $"\
+          {fail "use hook-stop command"}
+  timeout {fail "(timeout) use hook-stop command"}
+}
+
+# Verify that GDB responds gracefully to an attempt to define a "hook
+# command" which doesn't exist.  (Test both the confirmed and unconfirmed
+# cases.)
+#
+send_gdb "define hook-bar\n"
+gdb_expect {
+  -re "warning: Your new `hook-bar' command does not hook any existing command.\r\nProceed.*y or n. $"\
+          {send_gdb "n\n"
+           gdb_expect {
+             -re "Not confirmed.*$gdb_prompt $"\
+                     {pass "define hook undefined command aborted: bar"}
+             -re "$gdb_prompt $"\
+                     {fail "define hook undefined command aborted: bar"}
+             timeout {fail "(timeout) define hook undefined command aborted: bar"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define hook undefined command aborted: bar"}
+  timeout {fail "(timeout) define hook undefined command aborted: bar"}
+}
+
+send_gdb "define hook-bar\n"
+gdb_expect {
+  -re "warning: Your new `hook-bar' command does not hook any existing command.\r\nProceed.*y or n. $"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re "Type commands for definition of \"hook-bar\".\r\nEnd with a line saying just \"end\".\r\n>$"\
+                     {send_gdb "nextwhere\nend\n"
+                      gdb_expect {
+                        -re "$gdb_prompt $"\
+                                {pass "define hook undefined command: bar"}
+                        timeout {fail "(timeout) define hook undefined command: bar"}
+                      }
+                     }
+             -re "$gdb_prompt $"\
+                     {fail "define hook undefined command: bar"}
+             timeout {fail "(timeout) define hook undefined command: bar"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "define hook undefined command: bar"}
+  timeout {fail "(timeout) define hook undefined command: bar"}
+}
+
+# This is a quasi-define command: Verify that the user can redefine
+# GDB's gdb_prompt.
+#
+send_gdb "set prompt \\(blah\\) \n"
+gdb_expect {
+  -re "\\(blah\\) $"\
+          {pass "set gdb_prompt"}
+  -re "$gdb_prompt $"\
+          {fail "set gdb_prompt"}
+  timeout {fail "(timeout) set gdb_prompt"}
+}
+
+send_gdb "set prompt \\(gdb\\) \n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "reset gdb_prompt"}
+  timeout {fail "(timeout) reset gdb_prompt"}
+}
+
+gdb_exit
+return 0
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/display.c b/gdb/testsuite/gdb.base/display.c
new file mode 100644
index 0000000..a85f067
--- /dev/null
+++ b/gdb/testsuite/gdb.base/display.c
@@ -0,0 +1,52 @@
+/* Loop and vars for tests of display commands
+*/
+#include <stdio.h>
+#define LOOP 10
+
+int sum = 0;
+
+int do_loops()
+{
+    int i=0;
+    int k=0;
+    int j=0;
+    
+    for( i = 0; i < LOOP; i++ ) {
+        for( j = 0; j < LOOP; j++ ) {
+            for( k = 0; k < LOOP; k++ ) {
+                sum++;
+            }
+        }
+    } 
+    return i;
+}
+
+int do_vars()
+{
+    int       j;
+    int       i = 9;
+    float     f = 1.234;
+    char      c = 'Q';
+    int    *p_i = &i;
+    float  *p_f = &f;
+    char   *p_c = "rubarb and fries";
+
+    /* Need some code here to set breaks on.
+     */
+    for( j = 0; j < LOOP; j++ ) {
+        if( p_c[j] == c ) {
+            j++;
+        } 
+        else {
+            i++;
+        }
+    }
+
+    return *p_i;
+}
+
+main()
+{
+    do_loops();
+    do_vars();    
+}
diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp
new file mode 100644
index 0000000..f5c2641
--- /dev/null
+++ b/gdb/testsuite/gdb.base/display.exp
@@ -0,0 +1,147 @@
+#   Copyright (C) 1997, 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# display.exp   Test display commands
+#               Also do some printing stuff for coverage's sake.
+#
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile display
+set srcfile  ${srcdir}/${subdir}/${testfile}.c
+set binfile  ${objdir}/${subdir}/${testfile}
+
+
+
+if  { [gdb_compile "${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+
+
+# use this to debug:
+#log_user 1
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Ok, on to real life
+#
+gdb_test "b main"     ".*Breakpoint 1.*" "break main"
+gdb_test "r"          ".*Breakpoint 1, main.*" "get to main"
+gdb_test "b 14" ".*Breakpoint 2.*" "break do_loops"
+gdb_test "c"          ".*Breakpoint 2, do_loops.*" "get to do_loops"
+
+# Create stopping points.
+#
+gdb_test "wat sum"    ".*\[Ww\]atchpoint 3: sum.*" "set watch"
+gdb_test "b 19"       ".*Breakpoint 4.*" "break 19"
+
+# Create displays for those points
+#
+gdb_test "info disp" ".*There are no auto-display expressions now..*" "inf disp"
+gdb_test "disp i" ".*1: i = 0.*" "display i"
+gdb_test "disp/x j" ".*2: /x j = 0x0.*" "display j"
+gdb_test "disp/i &k" ".*3: x/i &k  $hex:.*" "display &k"
+gdb_test "disp/f sum" ".*4: /f sum = 0.*" "display/f sum"
+gdb_test "disp/s &sum" ".*5: x/s &sum  $hex.*sum.:.*" "display/s &sum"
+
+# Hit the displays
+#
+gdb_test "c" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f sum = 1.40129846e.45\r\n\[1-9\]*: x/i &k.*\r\n\[1-9\]*: /x j = 0x0\r\n\[1-9\]*: i = 0.*" "first disp"
+gdb_test "c" ".*\[Ww\]atchpoint 3: sum.*\[1-9\]*: x/s &sum.*\[1-9\]*: /f sum = 2.80259693e.45\r\n\[1-9\]*: x/i &k.*\r\n\[1-9\]*: /x j = 0x0.*\[1-9\]*: i = 0.*" "second disp"
+
+gdb_test "enab  disp 6" ".*No display number 6..*" "catch err"
+gdb_test "disab disp 1" ".*" "disab"
+gdb_test "disab disp 2" ".*" ""
+gdb_test "enab disp 1"  ".*" "re-enab"
+gdb_test "enab disp 1"  ".*" "re-enab of enab"
+gdb_test "undisp 5"     ".*" "undisp"
+gdb_test "i disp"       ".*Auto-display expressions now in effect.*y  /f sum.*y  /1bi &k.*n  /x j.*y  i.*" "info disp"
+
+gdb_test "c" ".*\[Ww\]atch.*4.20389539e-45.*.*i = 0.*" "next hit"
+
+send_gdb "undisp\n"
+gdb_expect {
+    -re ".*Delete all auto-display expressions.*y or n. $" {
+        send_gdb "y\n"
+        gdb_expect {
+            -re "y\r\n$gdb_prompt $" {
+                pass "undisp all"
+            }
+            -re ".*$gdb_prompt $" {
+                fail "some un-helpful response"
+            }
+            -re ".*Delete all.*$" {
+                fail "re-ask question"
+            }
+            timeout { fail "timeout" }
+        }
+    }
+    -re ".*$gdb_prompt $" {
+        fail "undisp all"
+    }
+    timeout { fail "timeout" }
+}
+
+gdb_test "disab 3" ".*.*" ""
+gdb_test "c" ".*Breakpoint 4.*" "watch off"
+
+# Now the printf tests
+#
+gdb_test "fin" ".*Run till exit.*Value returned is.*= 10.*" "finish"
+gdb_test "s" ".*do_vars.*.*25" ""
+gdb_test "tb 35" ".*Breakpoint 5 a.*" ""
+gdb_test "c" ".*do_vars.*35.*35.*" ""
+
+# Beat on printf a bit
+#
+gdb_test "printf" ".*Argument required.*" ""
+gdb_test "printf %d" ".*Bad format string, missing.*" ""
+gdb_test "printf \"%d" ".*Bad format string, non-terminated.*" ""
+gdb_test "printf \"%d%d\",i" ".*Wrong number of arguments.*" ""
+gdb_test "printf \"\\\\!\\a\\f\\r\\t\\v\\b\"" ".*!.*" ""
+gdb_test "printf \"\"" ".*" "re-set term"
+gdb_test "printf \"\\w\"" ".*Unrecognized escape character.*" ""
+gdb_test "printf \"%d\" j" ".*Invalid argument syntax.*" ""
+
+# play with "p", too
+#
+gdb_test "p/r j" ".*Undefined output format.*" ""
+#gdb_test "x/rx j" ".*Cannot access memory.*" "no error!"
+gdb_test "x/0 j" ".*" "x/0 j"
+gdb_test "p/0 j" ".*Item count other than 1 is meaningless.*" "p/0 j"
+gdb_test "p/s sum" ".*Format letter.*is meaningless.*" " no s"
+gdb_test "p/i sum" ".*Format letter.*is meaningless.*.*" "no i"
+gdb_test "p/a &sum" ".*= 0x.*<sum>.*" ""
+gdb_test "p/a main+1000" ".*= 0x.*<.*>.*" ""
+gdb_test "p/a \\\$pc" ".*= 0x.*<do_vars+.*>.*" ""
+gdb_test "p/a &j" ".*= 0x.*<.*>.*" ""
+gdb_test "p/a &&j" ".*A syntax error.*" ""
+
+# Done!
+#
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/dollar.exp b/gdb/testsuite/gdb.base/dollar.exp
new file mode 100644
index 0000000..50fac6a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/dollar.exp
@@ -0,0 +1,128 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# GDB tests for names beginning with '$'
+
+# This is aimed at HP-UX systems where a lot of system
+# routines and names begin with '$' or '$$'.  GDB 4.16 was
+# unable to deal with these names as they clashed with
+# convenience variables.  Wildebeest should accept such
+# names in preference to convenience variables.
+
+# This file was written by Satish Pai <pai@apollo.hp.com>
+# 1997-09-24
+
+if ![ istarget "*-*-hpux*" ] then {
+ return
+}
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "exprs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#source ${binfile}.ci
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+# Test for millicode routines
+send_gdb "print \$\$dyncall\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall" }
+   -re "\\$\[0-9\]* = void"            { fail "print \$\$dyncall -- interpreted as convenience var" }
+   -re "$gdb_prompt $"                     { fail "print \$\$dyncall" }
+   timeout                             { fail "(timeout) print \$\$dyncall" }
+}
+send_gdb "print \$\$dyncall_external\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{<text variable, no debug info>\\} $hex <>.*$gdb_prompt $" { pass "print \$\$dyncall_external" }
+   -re "\\$\[0-9\]* = void"            { fail "print \$\$dyncall_external -- interpreted as convenience var" }
+   -re "$gdb_prompt $"                     { fail "print \$\$dyncall_external" }
+   timeout                             { fail "(timeout) print \$\$dyncall_external" }
+}
+
+# Set a breakpoint on a millicode routine
+send_gdb "break \$\$dyncall\n"   
+gdb_expect {   
+   -re "Breakpoint \[0-9\]* at $hex.*$gdb_prompt $" { pass "break \$\$dyncall" }
+   -re "Function.*not defined.*$gdb_prompt $" {fail "break \$\$dyncall -- no \$\$dyncall?" }
+   -re "Convenience variables used in line specs must have integer values\\..*$gdb_prompt $" {
+             fail "break \$\$dyncall -- treated as convenince variable"
+       }          
+   -re "$gdb_prompt $"                     { fail "print break \$\$dyncall" }
+   timeout                             { fail "(timeout) print break \$\$dyncall" }
+}
+
+# Disassemble $$dyncall
+send_gdb "disassemble \$\$dyncall\n"   
+gdb_expect {   
+   -re "Dump of assembler code for function.*$gdb_prompt $" { pass "disas \$\$dyncall" }
+   -re "$gdb_prompt $"                     { fail "disas \$\$dyncall" }
+   timeout                             { fail "(timeout) disas \$\$dyncall" }
+}
+
+# Try to set $$dyncall like a convenience var.
+send_gdb "set \$\$dyncall = 77\n"   
+gdb_expect {   
+   -re "Invalid cast.*$gdb_prompt $" { pass "set \$\$dyncall = 77" }
+   -re "$gdb_prompt $"                     { fail "set \$\$dyncall = 77" }
+   timeout                             { fail "(timeout) set \$\$dyncall = 77" }
+}
+
+# Try out some other $ name, not millicode
+send_gdb "print \$ARGV\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \[0-9\]*.*$gdb_prompt $" { pass "print \$ARGV" }
+   -re "\\$\[0-9\]* = void.*$gdb_prompt $" { fail "print \$ARGV (interpreted as convenience var)" }
+   -re "$gdb_prompt $"                     { fail "print \$ARGV" }
+   timeout                             { fail "(timeout) print \$ARGV" }
+}
+send_gdb "ptype \$ARGV\n"   
+gdb_expect {   
+   -re "type = <data variable, no debug info>.*$gdb_prompt $" { pass "ptype \$ARGV" }
+   -re "type = void.*$gdb_prompt $" { fail "ptype \$ARGV (interpreted as convenience var)" }
+   -re "$gdb_prompt $"                     { fail "ptype \$ARGV" }
+   timeout                             { fail "(timeout) ptype \$ARGV" }
+}
+
diff --git a/gdb/testsuite/gdb.base/echo.exp b/gdb/testsuite/gdb.base/echo.exp
new file mode 100644
index 0000000..c8220ff
--- /dev/null
+++ b/gdb/testsuite/gdb.base/echo.exp
@@ -0,0 +1,44 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+# Crank up gdb.
+gdb_start
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test the echo command
+#
+
+# this sets the prms id number.  This is the number that will appear
+# on all the output logs.
+#	ex: set prms_id 643
+set prms_id 0
+
+# this sets the bug id id.  This is the number that will appear
+# on all the output logs. This is optional and if it is not set
+# it will appear on all output logs as a 0.
+#	ex: set bug_id 12
+set bug_id 0
+
+gdb_test "echo Hello world!\\n" "Hello world!" "Echo test"
diff --git a/gdb/testsuite/gdb.base/ena-dis-br.exp b/gdb/testsuite/gdb.base/ena-dis-br.exp
new file mode 100644
index 0000000..6593d82
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ena-dis-br.exp
@@ -0,0 +1,525 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+# Verify that we can set a breakpoint (the location is irrelevant),
+# then enable it (yes, it's already enabled by default), then hit it.
+#
+send_gdb "break marker1\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 41.*$gdb_prompt $"\
+          {pass "break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "break marker1"}
+  timeout {fail "(timeout) break marker1"}
+}
+
+send_gdb "enable $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "enable break marker1"}
+  timeout {fail "(timeout) enable break marker1"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y.*$gdb_prompt $"\
+          {pass "info break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "info break marker1"}
+  timeout {fail "(timeout) info break marker1"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\
+          {pass "continue to break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "continue to break marker1"}
+  timeout {fail "(timeout) continue to break marker1"}
+}
+
+send_gdb "delete $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "delete break marker1"}
+  timeout {fail "(timeout) delete break marker1"}
+}
+
+# Verify that we can set a breakpoint to be self-disabling after
+# the first time it triggers.
+#
+send_gdb "break marker2\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 42.*$gdb_prompt $"\
+          {pass "break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "break marker2"}
+  timeout {fail "(timeout) break marker2"}
+}
+
+send_gdb "enable once $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "enable once break marker2"}
+  timeout {fail "(timeout) enable once break marker2"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+dis\[ \t\]+y.*$gdb_prompt $"\
+          {pass "info auto-disabled break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "info auto-disabled break marker2"}
+  timeout {fail "(timeout) info auto-disabled break marker2"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, marker2.*$gdb_prompt $"\
+          {pass "continue to auto-disabled break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "continue to auto-disabled break marker2"}
+  timeout {fail "(timeout) continue to auto-disabled break marker2"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+dis\[ \t\]+n.*$gdb_prompt $"\
+          {pass "info auto-disabled break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "info auto-disabled break marker2"}
+  timeout {fail "(timeout) info auto-disabled break marker2"}
+}
+
+# Verify that we don't stop at a disabled breakpoint.
+#
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*Program exited normally.*$gdb_prompt $"\
+          {pass "no stop"}
+  -re "$gdb_prompt $"\
+          {fail "no stop"}
+  timeout {fail "(timeout) no stop"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+  -re "Starting program.*$gdb_prompt $"\
+          {pass "rerun to main"}
+  -re "$gdb_prompt $"\
+          {fail "rerun to main"}
+  timeout {fail "(timeout) rerun to main"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*Program exited normally.*$gdb_prompt $"\
+          {pass "no stop at auto-disabled break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "no stop at auto-disabled break marker2"}
+  timeout {fail "(timeout) no stop at auto-disabled break marker2"}
+}
+
+# Verify that we can set a breakpoint to be self-deleting after
+# the first time it triggers.
+#
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+send_gdb "break marker3\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 43.*$gdb_prompt $"\
+          {pass "break marker3"}
+  -re "$gdb_prompt $"\
+          {fail "break marker3"}
+  timeout {fail "(timeout) break marker3"}
+}
+
+send_gdb "enable del $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "enable del break marker3"}
+  timeout {fail "(timeout) enable del break marker3"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*$gdb_prompt $"\
+          {pass "info auto-deleted break marker2"}
+  -re "$gdb_prompt $"\
+          {fail "info auto-deleted break marker2"}
+  timeout {fail "(timeout) info auto-deleted break marker2"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*marker3 .*:43.*$gdb_prompt $"\
+          {pass "continue to auto-deleted break marker3"}
+  -re "Breakpoint \[0-9\]*, marker3.*$gdb_prompt $"\
+          {fail "continue to auto-deleted break marker3"}
+  -re "$gdb_prompt $"\
+          {fail "continue to auto-deleted break marker3"}
+  timeout {fail "(timeout) continue to break marker3"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re ".*No breakpoint or watchpoint number.*$gdb_prompt $"\
+          {pass "info auto-deleted break marker3"}
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\].*$gdb_prompt $"\
+          {fail "info auto-deleted break marker3"}
+  -re "$gdb_prompt $"\
+          {fail "info auto-deleted break marker3"}
+  timeout {fail "(timeout) info auto-deleted break marker3"}
+}
+
+# Verify that we can set a breakpoint and manually disable it (we've
+# already proven that disabled bp's don't trigger).
+#
+send_gdb "break marker4\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 44.*$gdb_prompt $"\
+          {pass "break marker4"}
+  -re "$gdb_prompt $"\
+          {fail "break marker4"}
+  timeout {fail "(timeout) break marker4"}
+}
+
+send_gdb "disable $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "disable break marker4"}
+  timeout {fail "(timeout) disable break marker4"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+n.*$gdb_prompt $"\
+          {pass "info break marker4"}
+  -re "$gdb_prompt $"\
+          {fail "info break marker4"}
+  timeout {fail "(timeout) info break marker4"}
+}
+
+# Verify that we can set a breakpoint with an ignore count N, which
+# should cause the next N triggers of the bp to be ignored.  (This is
+# a flavor of enablement/disablement, after all.)
+#
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+send_gdb "break marker1\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 41.*$gdb_prompt $"\
+          {pass "break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "break marker1"}
+  timeout {fail "(timeout) break marker1"}
+}
+
+# Verify that an ignore of a non-existent breakpoint is gracefully
+# handled.
+#
+send_gdb "ignore 999 2\n"
+gdb_expect {
+  -re "No breakpoint number 999..*$gdb_prompt $"\
+          {pass "ignore non-existent break"}
+  -re "$gdb_prompt $"\
+          {fail "ignore non-existent break"}
+  timeout {fail "(timeout) ignore non-existent break"}
+}
+
+# Verify that a missing ignore count is gracefully handled.
+#
+send_gdb "ignore $expect_out(1,string) \n"
+gdb_expect {
+  -re "Second argument .specified ignore-count. is missing..*$gdb_prompt $"\
+          {pass "ignore break with missing ignore count"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break with missing ignore count"}
+  timeout {fail "(timeout) ignore break with missing ignore count"}
+}
+
+# Verify that a negative or zero ignore count is handled gracefully
+# (they both are treated the same).
+#
+send_gdb "ignore $expect_out(1,string) -1\n"
+gdb_expect {
+  -re "Will stop next time breakpoint \[0-9\]* is reached..*$gdb_prompt $"\
+          {pass "ignore break marker1 -1"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break marker1 -1"}
+  timeout {fail "(timeout) ignore break marker1 -1"}
+}
+
+send_gdb "ignore $expect_out(1,string) 0\n"
+gdb_expect {
+  -re "Will stop next time breakpoint \[0-9\]* is reached..*$gdb_prompt $"\
+          {pass "ignore break marker1 0"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break marker1 0"}
+  timeout {fail "(timeout) ignore break marker1 0"}
+}
+
+send_gdb "ignore $expect_out(1,string) 1\n"
+gdb_expect {
+  -re "Will ignore next crossing of breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "ignore break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break marker1"}
+  timeout {fail "(timeout) ignore break marker1"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y.*ignore next 1 hits.*$gdb_prompt $"\
+          {pass "info ignored break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "info ignored break marker1"}
+  timeout {fail "(timeout) info ignored break marker1"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*Program exited normally.*$gdb_prompt $"\
+          {pass "no stop at ignored break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "no stop at ignored break marker1"}
+  timeout {fail "(timeout) no stop at ignored break marker1"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+  -re "Starting program.*$gdb_prompt $"\
+          {pass "rerun to main"}
+  -re "$gdb_prompt $"\
+          {fail "rerun to main"}
+  timeout {fail "(timeout) rerun to main"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\
+          {pass "continue to break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "continue to break marker1"}
+  timeout {fail "(timeout) continue to break marker1"}
+}
+
+# Verify that we can specify both an ignore count and an auto-delete.
+#
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+send_gdb "break marker1\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 41.*$gdb_prompt $"\
+          {pass "break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "break marker1"}
+  timeout {fail "(timeout) break marker1"}
+}
+
+send_gdb "ignore $expect_out(1,string) 1\n"
+gdb_expect {
+  -re "Will ignore next crossing of breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "ignore break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break marker1"}
+  timeout {fail "(timeout) ignore break marker1"}
+}
+
+send_gdb "enable del $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "enable del break marker1"}
+  timeout {fail "(timeout) enable del break marker1"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+del\[ \t\]+y.*ignore next 1 hits.*$gdb_prompt $"\
+          {pass "info break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "info break marker1"}
+  timeout {fail "(timeout) info break marker2"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*Program exited normally.*$gdb_prompt $"\
+          {pass "no stop at ignored & auto-deleted break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "no stop at ignored & auto-deleted break marker1"}
+  timeout {fail "(timeout) no stop at ignored & auto-deleted break marker1"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+  -re "Starting program.*$gdb_prompt $"\
+          {pass "rerun to main"}
+  -re "$gdb_prompt $"\
+          {fail "rerun to main"}
+  timeout {fail "(timeout) rerun to main"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*marker1 .*:41.*$gdb_prompt $"\
+          {pass "continue to ignored & auto-deleted break marker1"}
+  -re "Breakpoint \[0-9\]*, marker1.*$gdb_prompt $"\
+          {fail "continue to ignored & auto-deleted break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "continue to ignored & auto-deleted break marker1"}
+  timeout {fail "(timeout) continue to ignored & auto-deleted break marker1"}
+}
+
+# Verify that a disabled breakpoint's ignore count isn't updated when
+# the bp is encountered.
+#
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+send_gdb "break marker1\n"
+gdb_expect {
+  -re "Breakpoint (\[0-9\]*) at .*, line 41.*$gdb_prompt $"\
+          {pass "break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "break marker1"}
+  timeout {fail "(timeout) break marker1"}
+}
+
+send_gdb "ignore $expect_out(1,string) 10\n"
+gdb_expect {
+  -re "Will ignore next 10 crossings of breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "ignore break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "ignore break marker1"}
+  timeout {fail "(timeout) ignore break marker1"}
+}
+
+send_gdb "disable $expect_out(1,string)\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "disable break marker1"}
+  timeout {fail "(timeout) disable break marker1"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re ".*Program exited normally.*$gdb_prompt $"\
+          {pass "no stop at ignored & disabled break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "no stop at ignored & disabled break marker1"}
+  timeout {fail "(timeout) no stop at ignored & disabled break marker1"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+  -re "Starting program.*$gdb_prompt $"\
+          {pass "rerun to main"}
+  -re "$gdb_prompt $"\
+          {fail "rerun to main"}
+  timeout {fail "(timeout) rerun to main"}
+}
+
+send_gdb "info break $expect_out(1,string)\n"
+gdb_expect {
+  -re "\[0-9\]*\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+n.*ignore next 10 hits.*$gdb_prompt $"\
+          {pass "info ignored & disabled break marker1"}
+  -re "$gdb_prompt $"\
+          {fail "info ignored & disabled break marker1"}
+  timeout {fail "(timeout) info ignored & disabled break marker1"}
+}
+
+# Verify that GDB correctly handles the "continue" command with an argument,
+# which is an ignore count to set on the currently stopped-at breakpoint.
+# (Also verify that GDB gracefully handles the case where the inferior
+# isn't stopped at a breakpoint.)
+#
+if ![runto_main] then { fail "enable/disable break tests suppressed" }
+
+send_gdb "break 64\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*.*, line 64.*$gdb_prompt $"\
+          {pass "prepare to continue with ignore count"}
+  -re "$gdb_prompt $"\
+          {fail "prepare to continue with ignore count"}
+  timeout {fail "(timeout) prepare to continue with ignore count"}
+}
+send_gdb "continue 2\n"
+gdb_expect {
+  -re "Will ignore next crossing of breakpoint \[0-9\]*.  Continuing..*$gdb_prompt $"\
+          {pass "continue with ignore count"}
+  -re "$gdb_prompt $"\
+          {fail "continue with ignore count"}
+  timeout {fail "(timeout) continue with ignore count"}
+}
+
+send_gdb "next\n"
+gdb_expect {
+  -re ".*66\[ \t\]*marker1.*$gdb_prompt $"\
+          {pass "step after continue with ignore count"}
+  -re "$gdb_prompt $"\
+          {fail "step after continue with ignore count"}
+  timeout {fail "(timeout) step after continue with ignore count"}
+}
+
+# ??rehrauer: Huh.  This appears to be an actual bug.  (No big
+# surprise, since this feature hasn't been tested...)  Looks like
+# GDB is currently trying to set the ignore count of bp # -1!
+#
+setup_xfail hppa_*_*
+send_gdb "continue 2\n"
+gdb_expect {
+  -re "Not stopped at any breakpoint; argument ignored..*$gdb_prompt $"\
+          {pass "continue with ignore count, not stopped at bpt"}
+  -re "No breakpoint number -1.*$gdb_prompt $"\
+          {xfail "(DTS'd) continue with ignore count, not stopped at bpt"}
+  -re "$gdb_prompt $"\
+          {fail "continue with ignore count, not stopped at bpt"}
+  timeout {fail "(timeout) step after continue with ignore count, not stopped at bpt"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/ending-run.c b/gdb/testsuite/gdb.base/ending-run.c
new file mode 100644
index 0000000..56335cf
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ending-run.c
@@ -0,0 +1,27 @@
+/* Test program for <next-at-end> and
+ * <leaves-core-file-on-quit> bugs.
+ */
+#include <stdio.h>
+
+int callee( x )
+int x;
+{
+    int y = x * x;
+    return (y - 2);
+}
+
+main()
+{
+
+    int *p;
+    int i;
+
+    p = (int *) malloc( 4 );
+    
+    for (i = 1; i < 10; i++)
+        {
+            printf( "%d ", callee( i ));
+            
+        }
+    printf( " Goodbye!\n" );
+}
diff --git a/gdb/testsuite/gdb.base/ending-run.exp b/gdb/testsuite/gdb.base/ending-run.exp
new file mode 100644
index 0000000..61b42c7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ending-run.exp
@@ -0,0 +1,176 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+# ending-run.exp -- Expect script to test ending a test run in gdb
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set testfile ending-run
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+remote_exec build "rm -f ${binfile}"
+remote_exec build "rm -f core"
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# CHFts23469: Test that you can "clear" a bp set at
+# a line _before_ the routine (which will default to the
+# first line in the routine, which turns out to correspond
+# to the prolog--that's another bug...)
+#
+gdb_test "b 1" ".*Breakpoint.*line 1.*" "bpt at line before routine"
+gdb_test "b 8" ".*Note.*also.*Breakpoint.*2.*" ""
+
+# Set up to go to the next-to-last line of the program
+#
+gdb_test "b 26" ".*Breakpoint.*3.*" ""
+
+# Expect to hit the bp at line "1", but symbolize this
+# as line "8".  Then try to clear it--this should work.
+#
+gdb_test "r" ".*Breakpoint.*1.*callee.*8.*" ""
+gdb_test "cle" ".*Deleted breakpoints 2 1.*" "clear worked"
+send_gdb "i b\n"
+gdb_expect {
+    -re ".*breakpoint.*breakpoint.*$gdb_prompt $" { fail "clear bp" }
+    -re ".*3.*main.*26.*$gdb_prompt $" { pass "cleared bp at line before routine" }
+    -re ".*$gdb_prompt $" { fail "info b" }
+}
+
+# Test some other "clear" combinations
+#
+gdb_test "b 1" ".*Breakpoint.*4.*" ""
+gdb_test "b 8" ".*Note.*also.*Breakpoint.*5.*" ""
+gdb_test "cle 8" ".*Deleted breakpoint 5.*" "Only cleared 1 by line"
+
+send_gdb "inf line 8\n"
+gdb_expect {
+    -re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" {
+        set line_eight $expect_out(1,string)
+        gdb_test "b 8" ".*Breakpoint.*6.*" ""
+        gdb_test "cle *$line_eight" ".*Deleted breakpoints 6 4.*" "Clear 2 by address"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "need to fix test for new compile outcome"
+    }
+}
+
+send_gdb "inf line 9\n"
+gdb_expect {
+    -re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" {
+        set line_nine $expect_out(1,string)
+        gdb_test "b 9"       ".*Breakpoint.*7.*" ""
+        gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint.*8.*" ""
+        gdb_test "c" ".*Breakpoint.*7.*callee.*9.*" ""
+        gdb_test "cle" ".*Deleted breakpoints 8 7.*" "Clear 2 by default"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "need to fix test for new compile outcome"
+    }
+}
+
+send_gdb "i b\n"
+gdb_expect {
+    -re ".*breakpoint.*breakpoint.*$gdb_prompt $" {
+        fail "didn't clear bps" 
+    }
+    -re ".*3.*main.*26.*$gdb_prompt $" {
+        pass "all set to continue"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "missing bp at end"
+    }
+}
+
+
+# See if we can step out with control.  The "1 2 3" stuff
+# is output from the program.
+#
+gdb_test "cont" ".*Breakpoint.*26.*" ""
+gdb_test "next" ".*1 2 7 14 23 34 47 62 79  Goodbye!.*27.*" "Step to return"
+
+set old_timeout $timeout
+set timeout 50
+send_gdb "next\n"
+gdb_expect {
+    -re "27.*$gdb_prompt $" {
+	# sometimes we stop at the closing brace, if so, do another next
+	send_gdb "next\n"
+	gdb_expect {
+	    -re ".*Unable to find return pc for this frame.*$gdb_prompt $" {
+		fail "Old bug came back!"
+		gdb_test "n" ".*" ""
+	    }
+	    -re ".*in.*start.*$gdb_prompt $" { 
+		pass "step out of main"
+	    }
+	    timeout { fail "hang or timeout on step at end 2" }
+	}
+    }
+    -re ".*Unable to find return pc for this frame.*$gdb_prompt $" {
+        fail "Old bug came back!"
+        gdb_test "n" ".*" ""
+    }
+    -re ".*in.*start.*$gdb_prompt $" { 
+        pass "step out of main"
+    }
+    timeout { fail "hang or timeout on step at end 1" }
+}
+
+gdb_test "n" ".*Single.*Program exited.*" "step to end of run"
+set timeout $old_timeout
+
+gdb_test "n" ".*The program is not being run.*" "don't step after run"
+
+set exec_output [remote_exec host "ls core"]
+
+if [ regexp "core not found" $exec_output]  {
+    pass "No core dumped on quit"
+} else {
+  if [ regexp "No such file or directory" $exec_output] {
+      pass "ls: core: No core dumped on quit"
+  } else {
+      remote_exec build "rm -f core"
+      fail "Core dumped on quit"
+  }
+}
+
+#remote_exec build "rm -f ${binfile}"
+return 0
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/environ.exp b/gdb/testsuite/gdb.base/environ.exp
new file mode 100644
index 0000000..0033917
--- /dev/null
+++ b/gdb/testsuite/gdb.base/environ.exp
@@ -0,0 +1,329 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+# This test exists solely to exercise the "environment" commands for
+# code-coverage on HP-UX.
+#
+if ![istarget "hppa*-*-hpux*"] then {
+  return
+}
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then { fail "environment command tests suppressed" }
+
+# (No, this is not really related to the environment commands.  But it's
+# a convenient place to verify that this command works.)
+#
+send_gdb "info program\n"
+gdb_expect {
+  -re ".*Using the running image of child process \[0-9\]*.\r\nProgram stopped at 0x\[0-9a-fA-F\]*.\r\nIt stopped at breakpoint 1..*$gdb_prompt $"\
+          {pass "info program"}
+  -re "$gdb_prompt $"\
+          {fail "info program"}
+  timeout {fail "(timeout) info program"}
+}
+
+# We don't really care where this step lands, so long as it gets
+# the inferior pushed off the breakpoint it's currently on...
+#
+send_gdb "next\n"
+gdb_expect {
+  -re ".*$gdb_prompt $"\
+          {pass "step before info program"}
+  timeout {fail "(timeout) step before info program"}
+}
+send_gdb "info program\n"
+gdb_expect {
+  -re ".*Using the running image of child process \[0-9\]*.\r\nProgram stopped at 0x\[0-9a-fA-F\]*.\r\nIt stopped after being stepped..*$gdb_prompt $"\
+          {pass "info program after step"}
+  -re "$gdb_prompt $"\
+          {fail "info program after step"}
+  timeout {fail "(timeout) info program after step"}
+}
+
+if ![runto_main] then { fail "environment command tests suppressed" }
+
+send_gdb "delete\n"
+gdb_expect {
+  -re ".*y or n. $"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re ".*$gdb_prompt $"\
+                     {pass "delete breakpoint before info program"}
+             timeout {fail "(timeout) delete breakpoint before info program"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "delete breakpoint before info program"}
+  timeout {fail "(timeout) delete breakpoint before info program"}
+}
+send_gdb "info program\n"
+gdb_expect {
+  -re ".*Using the running image of child process \[0-9\]*.\r\nProgram stopped at 0x\[0-9a-fA-F\]*.\r\nIt stopped at a breakpoint that has since been deleted..*$gdb_prompt $"\
+          {pass "info program after deleted breakpoint"}
+  -re "$gdb_prompt $"\
+          {fail "info program after deleted breakpoint"}
+  timeout {fail "(timeout) info program after deleted breakpoint"}
+}
+
+# Verify that we can show all currently-set environment variables.
+# (It's a bit hacky, but nonetheless probably safe to check for at
+# least the SHELL variable.)
+#
+# need to increase timeout because of very long output
+set oldtimeout $timeout
+set timeout [expr "$timeout + 300"]
+
+send_gdb "show environment\n"
+gdb_expect {
+  -re ".*SHELL=(\[a-zA-Z0-9\]*).*$gdb_prompt $"\
+          {pass "show environment"}
+  -re "$gdb_prompt $"\
+          {fail "show environment"}
+  timeout {fail "(timeout) show environment"}
+}
+set timeout $oldtimeout
+
+# Verify that we can unset a specific environment variable.
+#
+send_gdb "unset environment EDITOR\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue unset environment"}
+  timeout {fail "(timeout) issue unset environment"}
+}
+send_gdb "show environment EDITOR\n"
+gdb_expect {
+  -re "Environment variable \"EDITOR\" not defined.\r\n$gdb_prompt $"\
+          {pass "unset environment"}
+  -re "$gdb_prompt $"\
+          {fail "unset environment"}
+  timeout {fail "(timeout) unset environment"}
+}
+
+# Verify that we can unset all environment variables.
+#
+send_gdb "unset environment\n"
+gdb_expect {
+  -re "Delete all environment variables.*y or n. $"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "unset entire environment"}
+             timeout {fail "(timeout) unset entire environment"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "unset entire environment"}
+  timeout {fail "(timeout) unset entire environment"}
+}
+
+# Verify that we can set a specific environment variable.
+#
+send_gdb "set environment EDITOR emacs\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue set environment"}
+  timeout {fail "(timeout) issue set environment"}
+}
+send_gdb "show environment EDITOR\n"
+gdb_expect {
+  -re "EDITOR = emacs\r\n$gdb_prompt $"\
+          {pass "set environment"}
+  -re "$gdb_prompt $"\
+          {fail "set environment"}
+  timeout {fail "(timeout) set environment"}
+}
+
+# Verify that GDB responds gracefully to a request to set environment,
+# with no variable name.
+#
+send_gdb "set environment\n"
+gdb_expect {
+  -re "Argument required .environment variable and value..*$gdb_prompt $"\
+          {pass "set environment without variable disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "set environment without variable disallowed"}
+  timeout {fail "(timeout) set environment without variable disallowed"}
+}
+
+# I'm not sure just what GDB has in mind in explicitly checking
+# for this variant, but since GDB handles it, test it.
+#
+send_gdb "set environment =\n"
+gdb_expect {
+  -re "Argument required .environment variable to set..*$gdb_prompt $"\
+          {pass "set environment equals without variable disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "set environment equals without variable disallowed"}
+  timeout {fail "(timeout) set environment equals without variable disallowed"}
+}
+
+# Setting an environment variable without a value sets it to a NULL
+# value.
+#
+send_gdb "set environment EDITOR\n"
+gdb_expect {
+  -re "Setting environment variable \"EDITOR\" to null value..*$gdb_prompt $"\
+          {pass "issue set environment without variable value"}
+  -re "$gdb_prompt $"\
+          {fail "issue set environment without variable value"}
+  timeout {fail "(timeout) issue set environment without variable value"}
+}
+send_gdb "show environment EDITOR\n"
+gdb_expect {
+  -re "EDITOR = \r\n$gdb_prompt $"\
+          {pass "set environment without variable value"}
+  -re "$gdb_prompt $"\
+          {fail "set environment without variable value"}
+  timeout {fail "(timeout) set environment without variable value"}
+}
+
+# Verify that GDB responds gracefully to an attempt to show a
+# non-existent environment variable.  (We hope this variable is
+# undefined!)
+#
+send_gdb "show environment FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re "Environment variable \"FOOBARBAZGRUNGESPAZBALL\" not defined..*$gdb_prompt $"\
+          {pass "show non-existent environment variable disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "show non-existent environment variable disallowed"}
+  timeout {fail "(timeout) show non-existent environment variable disallowed"}
+}
+
+# Verify that GDB can set an environment variable hitherto undefined.
+#
+send_gdb "set environment FOOBARBAZGRUNGESPAZBALL t\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue set environment for previously undefined variable"}
+  timeout {fail "(timeout) issue set environment for previously undefined variable"}
+}
+send_gdb "show environment FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re "FOOBARBAZGRUNGESPAZBALL = t\r\n$gdb_prompt $"\
+          {pass "set environment for previously undefined variable"}
+  -re "$gdb_prompt $"\
+          {fail "set environment for previously undefined variable"}
+  timeout {fail "(timeout) set environment for previously undefined variable"}
+}
+
+# Verify that GDB can also set an environment variable using the "="
+# syntax.
+#
+send_gdb "set environment FOOBARBAZGRUNGESPAZBALL = t\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue set environment with equals"}
+  timeout {fail "(timeout) issue set environment with equals"}
+}
+send_gdb "show environment FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re "FOOBARBAZGRUNGESPAZBALL = t\r\n$gdb_prompt $"\
+          {pass "set environment with equals"}
+  -re "$gdb_prompt $"\
+          {fail "set environment with equals"}
+  timeout {fail "(timeout) set environment with equals"}
+}
+
+# Verify that GDB can set an environment variable to a value that has
+# an embedded (trailing, in this case) equals.
+#
+send_gdb "set environment FOOBARBAZGRUNGESPAZBALL t=\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue set environment with trailing equals"}
+  timeout {fail "(timeout) issue set environment with trailing equals"}
+}
+send_gdb "show environment FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re "FOOBARBAZGRUNGESPAZBALL = t=\r\n$gdb_prompt $"\
+          {pass "set environment with trailing equals"}
+  -re "$gdb_prompt $"\
+          {fail "set environment with trailing equals"}
+  timeout {fail "(timeout) set environment with trailing equals"}
+}
+
+# Verify that GDB can set an environment variable to a value preceded
+# by whitespace, and that such whitespace is ignored (not included
+# in the set value).
+#
+send_gdb "set environment FOOBARBAZGRUNGESPAZBALL =     foo\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "issue set environment with preceding whitespace"}
+  timeout {fail "(timeout) issue set environment with preceding whitespace"}
+}
+send_gdb "show environment FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re "FOOBARBAZGRUNGESPAZBALL = foo\r\n$gdb_prompt $"\
+          {pass "set environment with preceding whitespace"}
+  -re "$gdb_prompt $"\
+          {fail "set environment with preceding whitespace"}
+  timeout {fail "(timeout) set environment with preceding whitespace"}
+}
+
+# Verify that GDB can manipulate the distinguished PATH variable.
+#
+send_gdb "path /tmp/FOOBARBAZGRUNGESPAZBALL\n"
+gdb_expect {
+  -re ".*Executable and object file path: /tmp/FOOBARBAZGRUNGESPAZBALL.*$gdb_prompt $"\
+          {pass "issue path"}
+  -re "$gdb_prompt $"\
+          {fail "issue path"}
+  timeout {fail "(timeout) issue path"}
+}
+send_gdb "show paths\n"
+gdb_expect {
+  -re "Executable and object file path: /tmp/FOOBARBAZGRUNGESPAZBALL.*$gdb_prompt $"\
+          {pass "show paths"}
+  -re "$gdb_prompt $"\
+          {fail "show paths"}
+  timeout {fail "(timeout) show paths"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/eval-skip.exp b/gdb/testsuite/gdb.base/eval-skip.exp
new file mode 100644
index 0000000..4e17e61
--- /dev/null
+++ b/gdb/testsuite/gdb.base/eval-skip.exp
@@ -0,0 +1,352 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+
+#
+# tests to cover evaluate_subexp_standard with the EVAL_SKIP flag set.
+# this happens for instance when there is short circuit evaluation in the && and ||
+# operators, or in the non returned part of a (x ? y: z) expression.
+# the part that is not evaluated is parsed and evaluated anyway, but with
+# the EVAL_SKIP flag set
+# 
+# source file "int-type.c"
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+gdb_test "set variable x=14" "" "set variable x=14"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable z=2" "" "set variable z=2"
+gdb_test "set variable w=3" "" "set variable w=3"
+
+
+send_gdb "print (0 && (x+y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x+y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x+y))" }
+    timeout           { fail "(timeout) print value of (0 && (x+y))" }
+  }
+
+
+send_gdb "print (0 && (x-y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x-y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x-y))" }
+    timeout           { fail "(timeout) print value of (0 && (x-y))" }
+  }
+
+
+send_gdb "print (0 && (x*y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x*y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x*y))" }
+    timeout           { fail "(timeout) print value of (0 && (x*y))" }
+  }
+
+
+
+send_gdb "print (0 && (x/y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x/y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x/y))" }
+    timeout           { fail "(timeout) print value of (0 && (x/y))" }
+  }
+
+
+send_gdb "print (0 && (x%y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x%y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x%y))" }
+    timeout           { fail "(timeout) print value of (0 && (x%y))" }
+  }
+
+
+send_gdb "print (0 && (x&&y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x&&y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x&&y))" }
+    timeout           { fail "(timeout) print value of (0 && (x&&y))" }
+  }
+
+
+
+send_gdb "print (0 && (x||y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x||y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x||y))" }
+    timeout           { fail "(timeout) print value of (0 && (x||y))" }
+  }
+
+
+
+send_gdb "print (0 && (x&y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x&y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x&y))" }
+    timeout           { fail "(timeout) print value of (0 && (x&y))" }
+  }
+
+
+send_gdb "print (0 && (x|y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x|y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x|y))" }
+    timeout           { fail "(timeout) print value of (0 && (x|y))" }
+  }
+
+
+send_gdb "print (0 && (x^y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x^y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x^y))" }
+    timeout           { fail "(timeout) print value of (0 && (x^y))" }
+  }
+
+
+
+send_gdb "print (0 && (x < y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x < y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x < y))" }
+    timeout           { fail "(timeout) print value of (0 && (x < y))" }
+  }
+
+
+send_gdb "print (0 && (x <= y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x <= y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x <= y))" }
+    timeout           { fail "(timeout) print value of (0 && (x <= y))" }
+  }
+
+
+
+send_gdb "print (0 && (x>y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x>y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x>y))" }
+    timeout           { fail "(timeout) print value of (0 && (x>y))" }
+  }
+
+
+send_gdb "print (0 && (x>=y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x>=y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x>=y))" }
+    timeout           { fail "(timeout) print value of (0 && (x>=y))" }
+  }
+
+
+
+send_gdb "print (0 && (x==y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x==y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x==y))" }
+    timeout           { fail "(timeout) print value of (0 && (x==y))" }
+  }
+
+
+send_gdb "print (0 && (x!=y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x!=y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x!=y))" }
+    timeout           { fail "(timeout) print value of (0 && (x!=y))" }
+  }
+
+
+send_gdb "print (0 && (x<<31))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x<<31))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x<<31))" }
+    timeout           { fail "(timeout) print value of (0 && (x<<31))" }
+  }
+
+
+send_gdb "print (0 && (x>>31))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x>>31))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x>>31))" }
+    timeout           { fail "(timeout) print value of (0 && (x>>31))" }
+  }
+
+
+
+send_gdb "print (0 && (!x))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (!x))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (!x))" }
+    timeout           { fail "(timeout) print value of (0 && (!x))" }
+  }
+
+
+send_gdb "print (0 && (~x))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (~x))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (~x))" }
+    timeout           { fail "(timeout) print value of (0 && (~x))" }
+  }
+
+send_gdb "print (0 && (-x))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (-x))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (-x))" }
+    timeout           { fail "(timeout) print value of (0 && (-x))" }
+  }
+
+
+send_gdb "print (0 && (x++))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x++))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x++))" }
+    timeout           { fail "(timeout) print value of (0 && (x++))" }
+  }
+
+
+send_gdb "print (0 && (++x))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (++x))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (++x))" }
+    timeout           { fail "(timeout) print value of (0 && (++x))" }
+  }
+
+
+send_gdb "print (0 && (x--))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x--))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x--))" }
+    timeout           { fail "(timeout) print value of (0 && (x--))" }
+  }
+
+
+send_gdb "print (0 && (--x))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (--x))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (--x))" }
+    timeout           { fail "(timeout) print value of (0 && (--x))" }
+  }
+
+send_gdb "print (0 && (x+=7))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x+=7))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x+=7))" }
+    timeout           { fail "(timeout) print value of (0 && (x+=7))" }
+  }
+
+send_gdb "print (0 && (x=y))\n"
+gdb_expect {
+    -re ".$decimal = 0\r\n$gdb_prompt $" {
+        pass "print value of (0 && (x=y))"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (0 && (x=y))" }
+    timeout           { fail "(timeout) print value of (0 && (x=y))" }
+  }
+
+gdb_exit
+return 0
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/exprs.c b/gdb/testsuite/gdb.base/exprs.c
new file mode 100644
index 0000000..e5c7351
--- /dev/null
+++ b/gdb/testsuite/gdb.base/exprs.c
@@ -0,0 +1,253 @@
+main (argc, argv, envp)
+     int argc;
+     char **argv;
+     char **envp;
+{
+    extern void dummy();
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    dummy();
+}
+
+/* We put main() right up front so its line number doesn't keep changing.  */
+
+/*
+ *	Test file with lots of different types, for testing the
+ *	"whatis" command.
+ */
+
+/*
+ *	First the basic C types.
+ */
+
+#if !defined (__STDC__) && !defined (_AIX)
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+/*
+ *	Now some derived types, which are arrays, functions-returning,
+ *	pointers, structures, unions, and enumerations.
+ */
+
+/**** arrays *******/
+
+char		v_char_array[2];
+signed char	v_signed_char_array[2];
+unsigned char	v_unsigned_char_array[2];
+
+short		v_short_array[2];
+signed short	v_signed_short_array[2];
+unsigned short	v_unsigned_short_array[2];
+
+int		v_int_array[2];
+signed int	v_signed_int_array[2];
+unsigned int	v_unsigned_int_array[2];
+
+long		v_long_array[2];
+signed long	v_signed_long_array[2];
+unsigned long	v_unsigned_long_array[2];
+
+float		v_float_array[2];
+double		v_double_array[2];
+
+/**** pointers *******/
+
+char		*v_char_pointer;
+signed char	*v_signed_char_pointer;
+unsigned char	*v_unsigned_char_pointer;
+
+short		*v_short_pointer;
+signed short	*v_signed_short_pointer;
+unsigned short	*v_unsigned_short_pointer;
+
+int		*v_int_pointer;
+signed int	*v_signed_int_pointer;
+unsigned int	*v_unsigned_int_pointer;
+
+long		*v_long_pointer;
+signed long	*v_signed_long_pointer;
+unsigned long	*v_unsigned_long_pointer;
+
+float		*v_float_pointer;
+double		*v_double_pointer;
+
+/**** structs *******/
+
+struct t_struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct1;
+
+struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct2;
+
+/**** unions *******/
+
+union t_union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union;
+
+union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union2;
+
+/*** Functions returning type ********/
+
+char		v_char_func () { return(0); }
+signed char	v_signed_char_func () { return (0); }
+unsigned char	v_unsigned_char_func () { return (0); }
+
+short		v_short_func () { return (0); }
+signed short	v_signed_short_func () { return (0); }
+unsigned short	v_unsigned_short_func () { return (0); }
+
+int		v_int_func () { return (0); }
+signed int	v_signed_int_func () { return (0); }
+unsigned int	v_unsigned_int_func () { return (0); }
+
+long		v_long_func () { return (0); }
+signed long	v_signed_long_func () { return (0); }
+unsigned long	v_unsigned_long_func () { return (0); }
+
+float		v_float_func () { return (0.0); }
+double		v_double_func () { return (0.0); }
+
+/**** Some misc more complicated things *******/
+
+struct link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} *s_link;
+
+union tu_link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} u_link;
+
+/**** Enumerations *******/
+
+enum colors {red, green, blue} color;
+enum cars {chevy, ford, porsche} clunker;
+
+
+void dummy()
+{
+  /* Some linkers (e.g. on AIX) remove unreferenced variables,
+     so make sure to reference them. */
+  v_char = 0;
+  v_signed_char = 1;
+  v_unsigned_char = 2;
+
+  v_short = 3;
+  v_signed_short = 4;
+  v_unsigned_short = 5;    
+
+  v_int = 6;
+  v_signed_int = 7;
+  v_unsigned_int = 8;    
+
+  v_long = 9;
+  v_signed_long = 10;
+  v_unsigned_long = 11;    
+  
+  v_float = 100.0;
+  v_double = 200.0;
+
+
+  v_char_array[0] = v_char;
+  v_signed_char_array[0] = v_signed_char;
+  v_unsigned_char_array[0] = v_unsigned_char;
+
+  v_short_array[0] = v_short;
+  v_signed_short_array[0] = v_signed_short;
+  v_unsigned_short_array[0] = v_unsigned_short;
+
+  v_int_array[0] = v_int;
+  v_signed_int_array[0] = v_signed_int;
+  v_unsigned_int_array[0] = v_unsigned_int;
+
+  v_long_array[0] = v_long;
+  v_signed_long_array[0] = v_signed_long;
+  v_unsigned_long_array[0] = v_unsigned_long;
+
+  v_float_array[0] = v_float;
+  v_double_array[0] = v_double;
+
+  v_char_pointer = &v_char;
+  v_signed_char_pointer = &v_signed_char;
+  v_unsigned_char_pointer = &v_unsigned_char;
+
+  v_short_pointer = &v_short;
+  v_signed_short_pointer = &v_signed_short;
+  v_unsigned_short_pointer = &v_unsigned_short;
+
+  v_int_pointer = &v_int;
+  v_signed_int_pointer = &v_signed_int;
+  v_unsigned_int_pointer = &v_unsigned_int;
+
+  v_long_pointer = &v_long;
+  v_signed_long_pointer = &v_signed_long;
+  v_unsigned_long_pointer = &v_unsigned_long;
+
+  v_float_pointer = &v_float;
+  v_double_pointer = &v_double;
+
+  color = red;
+  clunker = porsche;
+
+  u_link.next = s_link;
+
+  v_struct2.v_int_member = v_struct1.v_int_member;
+  v_union2.v_short_member = v_union.v_short_member;
+}
diff --git a/gdb/testsuite/gdb.base/exprs.exp b/gdb/testsuite/gdb.base/exprs.exp
new file mode 100644
index 0000000..cdf33dc
--- /dev/null
+++ b/gdb/testsuite/gdb.base/exprs.exp
@@ -0,0 +1,222 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel {
+    strace $tracelevel
+}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "exprs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+proc test_expr { args } {
+    if { [llength $args] % 2 } {
+	warning "an even # of arguments should be passed to test_expr"
+    }
+    set last_ent [expr [llength $args] - 1];
+    set testname [lindex $args $last_ent];
+    if [gdb_test [lindex $args 0] "" "$testname (setup)"] {
+	gdb_suppress_tests;
+    }
+    for {set x 1} {$x < $last_ent} {set x [expr $x + 2]} {
+	if [gdb_test [lindex $args $x] [lindex $args [expr $x + 1]] "$testname ([lindex $args $x])"] {
+	    gdb_suppress_tests;
+	}
+    }
+    gdb_stop_suppressing_tests;
+}
+#
+# test expressions with "char" types
+#
+test_expr "set variable v_char=127" "print v_char == 0" "\\$\[0-9\]* = 0"  "print v_char == 127" "\\$\[0-9\]* = 1"  "print char =="
+test_expr "set variable v_char=127" "print v_char != 0" "\\$\[0-9\]* = 1"  "print v_char != 127" "\\$\[0-9\]* = 0"  "print char !="
+test_expr "set variable v_char=127" "print v_char < 0" "\\$\[0-9\]* = 0"  "print v_char < 127" "\\$\[0-9\]* = 0"  "print char <"
+test_expr "set variable v_char=127" "print v_char > 0" "\\$\[0-9\]* = 1"  "print v_char > 127" "\\$\[0-9\]* = 0"  "print char >"
+#
+# test expressions with "signed char" types
+#
+test_expr "set variable v_signed_char=127" "print v_signed_char == 0" "\\$\[0-9\]* = 0"  "print v_signed_char == 127" "\\$\[0-9\]* = 1"  "print signed char =="
+test_expr "set variable v_signed_char=127" "print v_signed_char != 0" "\\$\[0-9\]* = 1"  "print v_signed_char != 127" "\\$\[0-9\]* = 0"  "print signed char !="
+test_expr "set variable v_signed_char=127" "print v_signed_char < 0" "\\$\[0-9\]* = 0"  "print v_signed_char < 127" "\\$\[0-9\]* = 0"  "print signed char <"
+test_expr "set variable v_signed_char=127" "print v_signed_char > 0" "\\$\[0-9\]* = 1"  "print v_signed_char > 127" "\\$\[0-9\]* = 0"  "print signed char >"
+# make char a minus
+test_expr "set variable v_signed_char=-1" "print v_signed_char == 0" "\\$\[0-9\]* = 0"  "print v_signed_char == -1" "\\$\[0-9\]* = 1"  "print signed char == (minus)"
+test_expr "set variable v_signed_char=-1" "print v_signed_char != 0" "\\$\[0-9\]* = 1"  "print v_signed_char != -1" "\\$\[0-9\]* = 0"  "print signed char != (minus)"
+test_expr "set variable v_signed_char=-1" "print v_signed_char < 0" "\\$\[0-9\]* = 1"  "print v_signed_char < 127" "\\$\[0-9\]* = 1"  "print signed char < (minus)"
+test_expr "set variable v_signed_char=-1" "print v_signed_char > 0" "\\$\[0-9\]* = 0"  "print v_signed_char > 127" "\\$\[0-9\]* = 0"  "print signed char > (minus)"
+#
+# test expressions with "unsigned char" types
+#
+test_expr "set variable v_unsigned_char=127" "print v_unsigned_char == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_char == 127" "\\$\[0-9\]* = 1"  "print unsigned char =="
+test_expr "set variable v_unsigned_char=127" "print v_unsigned_char != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_char != 127" "\\$\[0-9\]* = 0"  "print unsigned char !="
+test_expr "set variable v_unsigned_char=127" "print v_unsigned_char < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_char < 127" "\\$\[0-9\]* = 0"  "print unsigned char <"
+test_expr "set variable v_unsigned_char=127" "print v_unsigned_char > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_char > 127" "\\$\[0-9\]* = 0"  "print unsigned char >"
+# make char a minus
+# FIXME:  gdb mishandles the cast (unsigned char) on the i960, so I've
+# set up an expected failure for this case.
+setup_xfail "i960-*-*" 1821
+test_expr "set variable v_unsigned_char=~0" "print v_unsigned_char == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_char == ~0" "\\$\[0-9\]* = 0"  "print v_unsigned_char == (unsigned char)~0" "\\$\[0-9\]* = 1"  "print unsigned char == (~0)"
+# FIXME:  gdb mishandles the cast (unsigned char) on the i960, so I've
+# set up an expected failure for this case.
+setup_xfail "i960-*-*" 1821
+test_expr "set variable v_unsigned_char=~0" "print v_unsigned_char != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_char != (unsigned char)~0" "\\$\[0-9\]* = 0"  "print unsigned char != (~0)"
+test_expr "set variable v_unsigned_char=~0" "print v_unsigned_char < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_char < 127" "\\$\[0-9\]* = 0"  "print unsigned char < (~0)"
+test_expr "set variable v_unsigned_char=~0" "print v_unsigned_char > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_char > 127" "\\$\[0-9\]* = 1"  "print unsigned char > (~0)"
+#
+# test expressions with "short" types
+#
+test_expr "set variable v_short=0x7FFF" "print v_short == 0" "\\$\[0-9\]* = 0"  "print v_short == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed short =="
+test_expr "set variable v_short=0x7FFF" "print v_short != 0" "\\$\[0-9\]* = 1"  "print v_short != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed short !="
+test_expr "set variable v_short=0x7FFF" "print v_short < 0" "\\$\[0-9\]* = 0"  "print v_short < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed short <"
+test_expr "set variable v_short=0x7FFF" "print v_short > 0" "\\$\[0-9\]* = 1"  "print v_short > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed short >"
+# make short a minus
+test_expr "set variable v_short=-1" "print v_short == 0" "\\$\[0-9\]* = 0"  "print v_short == -1" "\\$\[0-9\]* = 1"  "print signed short == (minus)"
+test_expr "set variable v_short=-1" "print v_short != 0" "\\$\[0-9\]* = 1"  "print v_short != -1" "\\$\[0-9\]* = 0"  "print signed short != (minus)"
+test_expr "set variable v_short=-1" "print v_short < 0" "\\$\[0-9\]* = 1"  "print v_short < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed short < (minus)"
+test_expr "set variable v_short=-1" "print v_short > 0" "\\$\[0-9\]* = 0"  "print v_short > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed short > (minus)"
+#
+# test expressions with "signed short" types
+#
+test_expr "set variable v_signed_short=0x7FFF" "print v_signed_short == 0" "\\$\[0-9\]* = 0"  "print v_signed_short == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed short =="
+test_expr "set variable v_signed_short=0x7FFF" "print v_signed_short != 0" "\\$\[0-9\]* = 1"  "print v_signed_short != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed short !="
+test_expr "set variable v_signed_short=0x7FFF" "print v_signed_short < 0" "\\$\[0-9\]* = 0"  "print v_signed_short < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed short <"
+test_expr "set variable v_signed_short=0x7FFF" "print v_signed_short > 0" "\\$\[0-9\]* = 1"  "print v_signed_short > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed short >"
+# make short a minus
+test_expr "set variable v_signed_short=-1" "print v_signed_short == 0" "\\$\[0-9\]* = 0"  "print v_signed_short == -1" "\\$\[0-9\]* = 1"  "print signed signed short == (minus)"
+test_expr "set variable v_signed_short=-1" "print v_signed_short != 0" "\\$\[0-9\]* = 1"  "print v_signed_short != -1" "\\$\[0-9\]* = 0"  "print signed signed short != (minus)"
+test_expr "set variable v_signed_short=-1" "print v_signed_short < 0" "\\$\[0-9\]* = 1"  "print v_signed_short < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed short < (minus)"
+test_expr "set variable v_signed_short=-1" "print v_signed_short > 0" "\\$\[0-9\]* = 0"  "print v_signed_short > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed short > (minus)"
+#
+# test expressions with "unsigned short" types
+#
+test_expr "set variable v_unsigned_short=0x7FFF" "print v_unsigned_short == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_short == 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned short =="
+test_expr "set variable v_unsigned_short=0x7FFF" "print v_unsigned_short != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_short != 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned short !="
+test_expr "set variable v_unsigned_short=0x7FFF" "print v_unsigned_short < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_short < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned short <"
+test_expr "set variable v_unsigned_short=0x7FFF" "print v_unsigned_short > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_short > 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned short >"
+# make short a minus
+# note that (unsigned short) ~0 == ~0 iff sizeof(short) == sizeof(int),
+# so we can't test v_unsigned_short != ~0
+test_expr "set variable v_unsigned_short=~0" \
+	"print v_unsigned_short == 0" "\\$\[0-9\]* = 0" \
+	"print v_unsigned_short == (unsigned short)~0" "\\$\[0-9\]* = 1" \
+	"print unsigned short == (~0)"
+test_expr "set variable v_unsigned_short=~0" "print v_unsigned_short != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_short != (unsigned short)~0" "\\$\[0-9\]* = 0"  "print unsigned short != (~0)"
+test_expr "set variable v_unsigned_short=~0" "print v_unsigned_short < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_short < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned short < (~0)"
+test_expr "set variable v_unsigned_short=~0" "print v_unsigned_short > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_short > 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned short > (~0)"
+#
+# test expressions with "int" types
+#
+test_expr "set variable v_int=0x7FFF" "print v_int == 0" "\\$\[0-9\]* = 0"  "print v_int == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed int =="
+test_expr "set variable v_int=0x7FFF" "print v_int != 0" "\\$\[0-9\]* = 1"  "print v_int != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed int !="
+test_expr "set variable v_int=0x7FFF" "print v_int < 0" "\\$\[0-9\]* = 0"  "print v_int < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed int <"
+test_expr "set variable v_int=0x7FFF" "print v_int > 0" "\\$\[0-9\]* = 1"  "print v_int > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed int >"
+# make int a minus
+test_expr "set variable v_int=-1" "print v_int == 0" "\\$\[0-9\]* = 0"  "print v_int == -1" "\\$\[0-9\]* = 1"  "print signed int == (minus)"
+test_expr "set variable v_int=-1" "print v_int != 0" "\\$\[0-9\]* = 1"  "print v_int != -1" "\\$\[0-9\]* = 0"  "print signed int != (minus)"
+test_expr "set variable v_int=-1" "print v_int < 0" "\\$\[0-9\]* = 1"  "print v_int < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed int < (minus)"
+test_expr "set variable v_int=-1" "print v_int > 0" "\\$\[0-9\]* = 0"  "print v_int > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed int > (minus)"
+#
+# test expressions with "signed int" types
+#
+test_expr "set variable v_signed_int=0x7FFF" "print v_signed_int == 0" "\\$\[0-9\]* = 0"  "print v_signed_int == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed int =="
+test_expr "set variable v_signed_int=0x7FFF" "print v_signed_int != 0" "\\$\[0-9\]* = 1"  "print v_signed_int != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed int !="
+test_expr "set variable v_signed_int=0x7FFF" "print v_signed_int < 0" "\\$\[0-9\]* = 0"  "print v_signed_int < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed int <"
+test_expr "set variable v_signed_int=0x7FFF" "print v_signed_int > 0" "\\$\[0-9\]* = 1"  "print v_signed_int > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed int >"
+# make int a minus
+test_expr "set variable v_signed_int=-1" "print v_signed_int == 0" "\\$\[0-9\]* = 0"  "print v_signed_int == -1" "\\$\[0-9\]* = 1"  "print signed signed int == (minus)"
+test_expr "set variable v_signed_int=-1" "print v_signed_int != 0" "\\$\[0-9\]* = 1"  "print v_signed_int != -1" "\\$\[0-9\]* = 0"  "print signed signed int != (minus)"
+test_expr "set variable v_signed_int=-1" "print v_signed_int < 0" "\\$\[0-9\]* = 1"  "print v_signed_int < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed int < (minus)"
+test_expr "set variable v_signed_int=-1" "print v_signed_int > 0" "\\$\[0-9\]* = 0"  "print v_signed_int > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed int > (minus)"
+#
+# test expressions with "unsigned int" types
+#
+test_expr "set variable v_unsigned_int=0x7FFF" "print v_unsigned_int == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_int == 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned int =="
+test_expr "set variable v_unsigned_int=0x7FFF" "print v_unsigned_int != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_int != 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned int !="
+test_expr "set variable v_unsigned_int=0x7FFF" "print v_unsigned_int < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_int < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned int <"
+test_expr "set variable v_unsigned_int=0x7FFF" "print v_unsigned_int > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_int > 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned int >"
+# make int a minus
+test_expr "set variable v_unsigned_int=~0" "print v_unsigned_int == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_int == ~0" "\\$\[0-9\]* = 1"  "print v_unsigned_int == (unsigned int)~0" "\\$\[0-9\]* = 1"  "print unsigned int == (~0)"
+test_expr "set variable v_unsigned_int=~0" "print v_unsigned_int != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_int != (unsigned int)~0" "\\$\[0-9\]* = 0"  "print unsigned int != (~0)"
+test_expr "set variable v_unsigned_int=~0" "print v_unsigned_int < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_int < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned int < (~0)"
+test_expr "set variable v_unsigned_int=~0" "print v_unsigned_int > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_int > 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned int > (~0)"
+#
+# test expressions with "long" types
+#
+test_expr "set variable v_long=0x7FFF" "print v_long == 0" "\\$\[0-9\]* = 0"  "print v_long == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed long =="
+test_expr "set variable v_long=0x7FFF" "print v_long != 0" "\\$\[0-9\]* = 1"  "print v_long != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed long !="
+test_expr "set variable v_long=0x7FFF" "print v_long < 0" "\\$\[0-9\]* = 0"  "print v_long < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed long <"
+test_expr "set variable v_long=0x7FFF" "print v_long > 0" "\\$\[0-9\]* = 1"  "print v_long > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed long >"
+# make long a minus
+test_expr "set variable v_long=-1" "print v_long == 0" "\\$\[0-9\]* = 0"  "print v_long == -1" "\\$\[0-9\]* = 1"  "print signed long == (minus)"
+test_expr "set variable v_long=-1" "print v_long != 0" "\\$\[0-9\]* = 1"  "print v_long != -1" "\\$\[0-9\]* = 0"  "print signed long != (minus)"
+test_expr "set variable v_long=-1" "print v_long < 0" "\\$\[0-9\]* = 1"  "print v_long < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed long < (minus)"
+test_expr "set variable v_long=-1" "print v_long > 0" "\\$\[0-9\]* = 0"  "print v_long > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed long > (minus)"
+#
+# test expressions with "signed long" types
+#
+test_expr "set variable v_signed_long=0x7FFF" "print v_signed_long == 0" "\\$\[0-9\]* = 0"  "print v_signed_long == 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed long =="
+test_expr "set variable v_signed_long=0x7FFF" "print v_signed_long != 0" "\\$\[0-9\]* = 1"  "print v_signed_long != 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed long !="
+test_expr "set variable v_signed_long=0x7FFF" "print v_signed_long < 0" "\\$\[0-9\]* = 0"  "print v_signed_long < 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed long <"
+test_expr "set variable v_signed_long=0x7FFF" "print v_signed_long > 0" "\\$\[0-9\]* = 1"  "print v_signed_long > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed long >"
+# make long a minus
+test_expr "set variable v_signed_long=-1" "print v_signed_long == 0" "\\$\[0-9\]* = 0"  "print v_signed_long == -1" "\\$\[0-9\]* = 1"  "print signed signed long == (minus)"
+test_expr "set variable v_signed_long=-1" "print v_signed_long != 0" "\\$\[0-9\]* = 1"  "print v_signed_long != -1" "\\$\[0-9\]* = 0"  "print signed signed long != (minus)"
+test_expr "set variable v_signed_long=-1" "print v_signed_long < 0" "\\$\[0-9\]* = 1"  "print v_signed_long < 0x7FFF" "\\$\[0-9\]* = 1"  "print signed signed long < (minus)"
+test_expr "set variable v_signed_long=-1" "print v_signed_long > 0" "\\$\[0-9\]* = 0"  "print v_signed_long > 0x7FFF" "\\$\[0-9\]* = 0"  "print signed signed long > (minus)"
+#
+# test expressions with "unsigned long" types
+#
+test_expr "set variable v_unsigned_long=0x7FFF" "print v_unsigned_long == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_long == 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned long =="
+test_expr "set variable v_unsigned_long=0x7FFF" "print v_unsigned_long != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_long != 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned long !="
+test_expr "set variable v_unsigned_long=0x7FFF" "print v_unsigned_long < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_long < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned long <"
+test_expr "set variable v_unsigned_long=0x7FFF" "print v_unsigned_long > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_long > 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned long >"
+# make long a minus
+test_expr "set variable v_unsigned_long=~0" "print v_unsigned_long == 0" "\\$\[0-9\]* = 0"  "print v_unsigned_long == ~0" "\\$\[0-9\]* = 1"  "print v_unsigned_long == (unsigned long)~0" "\\$\[0-9\]* = 1"  "print unsigned long == (~0)"
+test_expr "set variable v_unsigned_long=~0" "print v_unsigned_long != 0" "\\$\[0-9\]* = 1"  "print v_unsigned_long != (unsigned long)~0" "\\$\[0-9\]* = 0"  "print unsigned long != (~0)"
+test_expr "set variable v_unsigned_long=~0" "print v_unsigned_long < 0" "\\$\[0-9\]* = 0"  "print v_unsigned_long < 0x7FFF" "\\$\[0-9\]* = 0"  "print unsigned long < (~0)"
+test_expr "set variable v_unsigned_long=~0" "print v_unsigned_long > 0" "\\$\[0-9\]* = 1"  "print v_unsigned_long > 0x7FFF" "\\$\[0-9\]* = 1"  "print unsigned long > (~0)"
diff --git a/gdb/testsuite/gdb.base/foo.c b/gdb/testsuite/gdb.base/foo.c
new file mode 100644
index 0000000..ada9cf4
--- /dev/null
+++ b/gdb/testsuite/gdb.base/foo.c
@@ -0,0 +1,9 @@
+static int foox __attribute__ ((section (".data00"))) = 'f' + 'o' + 'o';
+
+int foo (int x)
+{
+  if (x)
+    return foox;
+  else
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.base/funcargs.c b/gdb/testsuite/gdb.base/funcargs.c
new file mode 100644
index 0000000..ead67e5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/funcargs.c
@@ -0,0 +1,582 @@
+/*  Test passing of arguments to functions.  Use various sorts of arguments,
+    including basic types, pointers to those types, structures, lots of
+    args, etc, in various combinations. */
+
+/* AIX requires this to be the first thing in the file.  */
+#ifdef __GNUC__
+#  define alloca __builtin_alloca
+#  define HAVE_STACK_ALLOCA 1
+#else /* not __GNUC__ */
+#  ifdef _AIX
+     #pragma alloca
+#    define HAVE_STACK_ALLOCA 1
+#  else /* Not AIX */
+#    ifdef sparc
+#      include <alloca.h>
+#      define HAVE_STACK_ALLOCA 1
+#      ifdef __STDC__
+         void *alloca ();
+#      else
+         char *alloca ();
+#      endif /* __STDC__ */
+#    endif /* sparc */
+#  endif /* Not AIX */
+#endif /* not __GNUC__ */
+
+char c = 'a';
+char *cp = &c;
+
+unsigned char uc = 'b';
+unsigned char *ucp = &uc;
+
+short s = 1;
+short *sp = &s;
+
+unsigned short us = 6;
+unsigned short *usp = &us;
+
+int i = 2;
+int *ip = &i;
+
+unsigned int ui = 7;
+unsigned int *uip = &ui;
+
+long l = 3;
+long *lp = &l;
+
+unsigned long ul = 8;
+unsigned long *ulp = &ul;
+
+float f = 4.0;
+float *fp = &f;
+
+double d = 5.0;
+double *dp = &d;
+
+struct stag {
+    int s1;
+    int s2;
+} st = { 101, 102 };
+struct stag *stp = &st;
+
+union utag {
+    int u1;
+    long u2;
+} un;
+union utag *unp = &un;
+
+char carray[] = {'a', 'n', ' ', 'a', 'r', 'r', 'a', 'y', '\0'};
+
+
+/* Test various permutations and interleaving of integral arguments */
+
+
+call0a (c, s, i, l)
+char c; short s; int i; long l;
+{
+  c = 'a';
+  s = 5;
+  i = 6;
+  l = 7;
+}
+
+call0b (s, i, l, c)
+short s; int i; long l; char c;
+{
+  s = 6; i = 7; l = 8; c = 'j';
+}
+
+call0c (i, l, c, s)
+int i; long l; char c; short s;
+{
+  i = 3; l = 4; c = 'k'; s = 5;
+}
+
+call0d (l, c, s, i)
+long l; char c; short s; int i;
+{
+  l = 7; c = 'z'; s = 8; i = 9;
+}
+
+call0e (c1, l, c2, i, c3, s, c4, c5)
+char c1; long l; char c2; int i; char c3; short s; char c4; char c5;
+{
+  c1 = 'a'; l = 5; c2 = 'b'; i = 7; c3 = 'c'; s = 7; c4 = 'f'; c5 = 'g';
+}
+
+
+/* Test various permutations and interleaving of unsigned integral arguments */
+
+
+call1a (uc, us, ui, ul)
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  uc = 5; us = 6; ui = 7; ul = 8;
+}
+
+call1b (us, ui, ul, uc)
+unsigned short us; unsigned int ui; unsigned long ul; unsigned char uc;
+{
+  uc = 5; us = 6; ui = 7; ul = 8;
+}
+
+call1c (ui, ul, uc, us)
+unsigned int ui; unsigned long ul; unsigned char uc; unsigned short us;
+{
+  uc = 5; us = 6; ui = 7; ul = 8;
+}
+
+call1d (ul, uc, us, ui)
+unsigned long ul; unsigned char uc; unsigned short us; unsigned int ui;
+{
+  uc = 5; us = 6; ui = 7; ul = 8;
+}
+
+call1e (uc1, ul, uc2, ui, uc3, us, uc4, uc5)
+unsigned char uc1; unsigned long ul; unsigned char uc2; unsigned int ui;
+unsigned char uc3; unsigned short us; unsigned char uc4; unsigned char uc5;
+{
+  uc1 = 5; ul = 7; uc2 = 8; ui = 9; uc3 = 10; us = 11; uc4 = 12; uc5 = 55;
+}
+
+/* Test various permutations and interleaving of integral arguments with
+   floating point arguments. */
+
+
+call2a (c, f1, s, d1, i, f2, l, d2)
+char c; float f1; short s; double d1; int i; float f2; long l; double d2;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2b (f1, s, d1, i, f2, l, d2, c)
+float f1; short s; double d1; int i; float f2; long l; double d2; char c;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2c (s, d1, i, f2, l, d2, c, f1)
+short s; double d1; int i; float f2; long l; double d2; char c; float f1;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2d (d1, i, f2, l, d2, c, f1, s)
+double d1; int i; float f2; long l; double d2; char c; float f1; short s;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2e (i, f2, l, d2, c, f1, s, d1)
+int i; float f2; long l; double d2; char c; float f1; short s; double d1;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2f (f2, l, d2, c, f1, s, d1, i)
+float f2; long l; double d2; char c; float f1; short s; double d1; int i;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2g (l, d2, c, f1, s, d1, i, f2)
+long l; double d2; char c; float f1; short s; double d1; int i; float f2;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2h (d2, c, f1, s, d1, i, f2, l)
+double d2; char c; float f1; short s; double d1; int i; float f2; long l;
+{
+  c = 'a'; f1 = 0.0; s = 5; d1 = 0.0; i = 6; f2 = 0.1; l = 7; d2 = 0.2;
+}
+
+call2i (c1, f1, c2, c3, d1, c4, c5, c6, f2, s, c7, d2)
+char c1; float f1; char c2; char c3; double d1; char c4; char c5; char c6;
+float f2; short s; char c7; double d2;
+{
+  c1 = 'a'; f1 = 0.0; c2 = 5; d1 = 0.0; c3 = 6; f2 = 0.1; c4 = 7; d2 = 0.2;
+  c5 = 's'; c6 = 'f'; c7 = 'z'; s = 77;
+}
+
+
+/* Test pointers to various integral and floating types. */
+
+
+call3a (cp, sp, ip, lp)
+char *cp; short *sp; int *ip; long *lp;
+{
+  cp = 0; sp = 0; ip = 0; lp = 0;
+}
+
+call3b (ucp, usp, uip, ulp)
+unsigned char *ucp; unsigned short *usp; unsigned int *uip;
+unsigned long *ulp;
+{
+  ucp = 0; usp = 0; uip = 0; ulp = 0;
+}
+
+call3c (fp, dp)
+float *fp; double *dp;
+{
+  fp = 0; dp = 0;
+}
+
+
+/* Test passing structures and unions by reference. */
+
+
+call4a (stp)
+struct stag *stp; {
+stp = 0;}
+
+call4b (unp)
+union utag *unp;
+{
+  unp = 0;
+}
+
+
+/* Test passing structures and unions by value. */
+
+
+call5a (st)
+struct stag st; {st.s1 = 5;}
+
+call5b (un)
+union utag un; {un.u1 = 7;}
+
+
+/* Test shuffling of args */
+
+
+call6a (c, s, i, l, f, d, uc, us, ui, ul)
+char c; short s; int i; long l; float f; double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  c = c;
+    call6b (s, i, l, f, d, uc, us, ui, ul);
+}
+
+call6b (s, i, l, f, d, uc, us, ui, ul)
+short s; int i; long l; float f; double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  s = s;
+    call6c (i, l, f, d, uc, us, ui, ul);
+}
+
+call6c (i, l, f, d, uc, us, ui, ul)
+int i; long l; float f; double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  i = i;
+    call6d (l, f, d, uc, us, ui, ul);
+}
+
+call6d (l, f, d, uc, us, ui, ul)
+long l; float f; double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  l = l;
+    call6e (f, d, uc, us, ui, ul);
+}
+
+call6e (f, d, uc, us, ui, ul)
+float f; double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  f = f;
+    call6f (d, uc, us, ui, ul);
+}
+
+call6f (d, uc, us, ui, ul)
+double d;
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  d = d;
+    call6g (uc, us, ui, ul);
+}
+
+call6g (uc, us, ui, ul)
+unsigned char uc; unsigned short us; unsigned int ui; unsigned long ul;
+{
+  uc = uc;
+    call6h (us, ui, ul);
+}
+
+call6h (us, ui, ul)
+unsigned short us; unsigned int ui; unsigned long ul;
+{
+  us = us;
+    call6i (ui, ul);
+}
+
+call6i (ui, ul)
+unsigned int ui; unsigned long ul;
+{
+  ui = ui;
+    call6j (ul);
+}
+
+call6j (ul)
+unsigned long ul;
+{
+  ul = ul;
+    call6k ();
+}
+
+call6k ()
+{
+}
+
+
+/*  Test shuffling of args, round robin */
+
+
+call7a (c, i, s, l, f, uc, d, us, ul, ui)
+char c; int i; short s; long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui;
+{
+    call7b (i, s, l, f, uc, d, us, ul, ui, c);
+}
+
+call7b (i, s, l, f, uc, d, us, ul, ui, c)
+int i; short s; long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui; char c;
+{
+    call7c (s, l, f, uc, d, us, ul, ui, c, i);
+}
+
+call7c (s, l, f, uc, d, us, ul, ui, c, i)
+short s; long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui; char c; int i;
+{
+    call7d (l, f, uc, d, us, ul, ui, c, i, s);
+}
+
+call7d (l, f, uc, d, us, ul, ui, c, i, s)
+long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui; char c; int i; short s;
+{
+    call7e (f, uc, d, us, ul, ui, c, i, s, l);
+}
+
+call7e (f, uc, d, us, ul, ui, c, i, s, l)
+float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui; char c; int i; short s; long l;
+{
+    call7f (uc, d, us, ul, ui, c, i, s, l, f);
+}
+
+call7f (uc, d, us, ul, ui, c, i, s, l, f)
+unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui; char c; int i; short s; long l; float f;
+{
+    call7g (d, us, ul, ui, c, i, s, l, f, uc);
+}
+
+call7g (d, us, ul, ui, c, i, s, l, f, uc)
+double d; unsigned short us; unsigned long ul; unsigned int ui; char c; int i; short s; long l; float f; unsigned char uc;
+{
+    call7h (us, ul, ui, c, i, s, l, f, uc, d);
+}
+
+call7h (us, ul, ui, c, i, s, l, f, uc, d)
+unsigned short us; unsigned long ul; unsigned int ui; char c; int i; short s; long l; float f; unsigned char uc; double d;
+{
+    call7i (ul, ui, c, i, s, l, f, uc, d, us);
+}
+
+call7i (ul, ui, c, i, s, l, f, uc, d, us)
+unsigned long ul; unsigned int ui; char c; int i; short s; long l; float f; unsigned char uc; double d; unsigned short us;
+{
+    call7j (ui, c, i, s, l, f, uc, d, us, ul);
+}
+
+call7j (ui, c, i, s, l, f, uc, d, us, ul)
+unsigned int ui; char c; int i; short s; long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul;
+{
+    call7k (c, i, s, l, f, uc, d, us, ul, ui);
+}
+
+call7k (c, i, s, l, f, uc, d, us, ul, ui)
+char c; int i; short s; long l; float f; unsigned char uc; double d; unsigned short us; unsigned long ul; unsigned int ui;
+{
+  c = 'a'; i = 7; s = 8; l = 7; f = 0.3; uc = 44; d = 0.44; us = 77;
+  ul = 43; ui = 33;
+}
+
+
+/*  Test printing of structures passed as arguments to recursive functions. */
+
+
+typedef struct s
+{
+  short s;
+  int i;
+  long l;
+} SVAL;	
+
+hitbottom ()
+{
+}
+
+void recurse (a, depth)
+SVAL a;
+int depth;
+{
+  a.s = a.i = a.l = --depth;
+  if (depth == 0)
+    hitbottom ();
+  else
+    recurse (a, depth);
+}
+
+test_struct_args ()
+{
+  SVAL s; s.s = 5; s.i = 5; s.l = 5;
+
+  recurse (s, 5);
+}
+
+/* On various machines (pa, 29k, and rs/6000, at least), a function which
+   calls alloca may do things differently with respect to frames.  So give
+   it a try.  */
+
+int
+localvars_after_alloca (c, s, i, l)
+     char c;
+     short s;
+     int i;
+     long l;
+{
+#ifdef HAVE_STACK_ALLOCA
+  /* No need to use the alloca.c alloca-on-top-of-malloc; it doesn't
+     test what we are looking for, so if we don't have an alloca which
+     allocates on the stack, just don't bother to call alloca at all.  */
+
+  char *z = alloca (s + 50);
+#endif
+  c = 'a';
+  s = 5;
+  i = 6;
+  l = 7;
+}
+
+void
+call_after_alloca_subr (c, s, i, l, uc, us, ui, ul)
+char c; int i; short s; long l; unsigned char uc; unsigned short us; unsigned long ul; unsigned int ui;
+{
+  c = 'a';
+  i = 7; s = 8; l = 7; uc = 44; us = 77;
+  ul = 43; ui = 33;
+}
+
+int
+call_after_alloca (c, s, i, l)
+     char c;
+     short s;
+     int i;
+     long l;
+{
+#ifdef HAVE_STACK_ALLOCA
+  /* No need to use the alloca.c alloca-on-top-of-malloc; it doesn't
+     test what we are looking for, so if we don't have an alloca which
+     allocates on the stack, just don't bother to call alloca at all.  */
+
+  char *z = alloca (s + 50);
+#endif
+  call_after_alloca_subr (c, s, i, l, 'b', 11, 12, (unsigned long)13);
+}
+
+
+
+/* The point behind this test is the PA will call this indirectly
+   through dyncall.  Unlike the indirect calls to call0a, this test
+   will require a trampoline between dyncall and this function on the
+   call path, then another trampoline on between this function and main
+   on the return path.  */
+double
+call_with_trampolines (d1)
+double d1;
+{
+  return d1;
+} /* End of call_with_trampolines, this comment is needed by funcargs.exp */
+
+/* Dummy functions which the testsuite can use to run to, etc.  */
+
+void
+marker_indirect_call () {}
+
+void
+marker_call_with_trampolines () {}
+
+main ()
+{
+  int (*pointer_to_call0a) () = call0a;
+  double (*pointer_to_call_with_trampolines) () = call_with_trampolines;
+
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  /* Test calling with basic integer types */
+  call0a (c, s, i, l);
+  call0b (s, i, l, c);
+  call0c (i, l, c, s);
+  call0d (l, c, s, i);
+  call0e (c, l, c, i, c, s, c, c);
+
+  /* Test calling with unsigned integer types */
+  call1a (uc, us, ui, ul);
+  call1b (us, ui, ul, uc);
+  call1c (ui, ul, uc, us);
+  call1d (ul, uc, us, ui);
+  call1e (uc, ul, uc, ui, uc, us, uc, uc);
+
+  /* Test calling with integral types mixed with floating point types */
+  call2a (c, f, s, d, i, f, l, d);
+  call2b (f, s, d, i, f, l, d, c);
+  call2c (s, d, i, f, l, d, c, f);
+  call2d (d, i, f, l, d, c, f, s);
+  call2e (i, f, l, d, c, f, s, d);
+  call2f (f, l, d, c, f, s, d, i);
+  call2g (l, d, c, f, s, d, i, f);
+  call2h (d, c, f, s, d, i, f, l);
+  call2i (c, f, c, c, d, c, c, c, f, s, c, d);;
+
+  /* Test dereferencing pointers to various integral and floating types */
+
+  call3a (cp, sp, ip, lp);
+  call3b (ucp, usp, uip, ulp);
+  call3c (fp, dp);
+
+  /* Test dereferencing pointers to structs and unions */
+
+  call4a (stp);
+  un.u1 = 1;
+  call4b (unp);
+
+  /* Test calling with structures and unions. */
+
+  call5a (st);
+  un.u1 = 2;
+  call5b (un);
+
+  /* Test shuffling of args */
+
+  call6a (c, s, i, l, f, d, uc, us, ui, ul);
+  call7a (c, i, s, l, f, uc, d, us, ul, ui);
+  
+  /* Test passing structures recursively. */
+
+  test_struct_args ();
+
+  localvars_after_alloca (c, s, i, l);
+
+  call_after_alloca (c, s, i, l);
+
+  /* This is for localvars_in_indirect_call.  */
+  marker_indirect_call ();
+  /* The comment on the following two lines is used by funcargs.exp,
+     don't change it.  */
+  (*pointer_to_call0a) (c, s, i, l);	/* First step into call0a.  */
+  (*pointer_to_call0a) (c, s, i, l);	/* Second step into call0a.  */
+  marker_call_with_trampolines ();
+  (*pointer_to_call_with_trampolines) (d); /* Test multiple trampolines.  */
+}
diff --git a/gdb/testsuite/gdb.base/funcargs.exp b/gdb/testsuite/gdb.base/funcargs.exp
new file mode 100644
index 0000000..e6245dc
--- /dev/null
+++ b/gdb/testsuite/gdb.base/funcargs.exp
@@ -0,0 +1,1017 @@
+# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "funcargs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+#
+# Locate actual args; integral types.
+#
+
+proc integral_args {} {
+    global gdb_prompt
+    global det_file
+    global gcc_compiled
+
+    delete_breakpoints
+
+    gdb_breakpoint call0a
+    gdb_breakpoint call0b
+    gdb_breakpoint call0c
+    gdb_breakpoint call0d
+    gdb_breakpoint call0e
+
+    # Run; should stop at call0a and print actual arguments.
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call0a \\(c=97 'a', s=1, i=2, l=3\\) .*$gdb_prompt $" {
+	    pass "run to call0a"
+	}
+	 -re "$gdb_prompt $"  { fail "run to call0a" ; gdb_suppress_tests }
+	 timeout { fail "(timeout) run to call0a" ; gdb_suppress_tests }
+    }
+
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+    gdb_test "print c" ".* = 97 'a'" "print c after run to call0a" 
+    gdb_test "print s" ".* = 1" "print s after run to call0a"
+    gdb_test "print i" ".* = 2" "print i after run to call0a"
+    gdb_test "print l " ".* = 3" "print l after run to call0a"
+
+    # Continue; should stop at call0b and print actual arguments.
+    if [gdb_test "cont" ".* call0b \\(s=1, i=2, l=3, c=97 'a'\\) .*" "continue to call0b"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call0c and print actual arguments.
+    if [gdb_test "cont" ".* call0c \\(i=2, l=3, c=97 'a', s=1\\) .*" "continue to call0c"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call0d and print actual arguments.
+    if [gdb_test "cont" ".* call0d \\(l=3, c=97 'a', s=1, i=2\\) .*" "continue to call0d";] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call0e and print actual arguments.
+    if [gdb_test "cont" ".* call0e \\(c1=97 'a', l=3, c2=97 'a', i=2, c3=97 'a', s=1, c4=97 'a', c5=97 'a'\\) .*" "continue to call0e" ] {
+	gdb_suppress_tests;
+    }
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; unsigned integral types.
+#
+
+proc unsigned_integral_args {} {
+    global gdb_prompt
+    global det_file
+    global gcc_compiled
+
+    delete_breakpoints
+
+    gdb_breakpoint call1a;
+    gdb_breakpoint call1b;
+    gdb_breakpoint call1c;
+    gdb_breakpoint call1d;
+    gdb_breakpoint call1e;
+
+    # Run; should stop at call1a and print actual arguments.
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call1a \\(uc=98 'b', us=6, ui=7, ul=8\\) .*$gdb_prompt $" {
+	    pass "run to call1a"
+	}
+	 -re "$gdb_prompt $" { fail "run to call1a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call1a" ; gdb_suppress_tests; }
+    }
+
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+    gdb_test "print uc" ".* = 98 'b'"
+    gdb_test "print us" ".* = 6"
+    gdb_test "print ui" ".* = 7"
+    gdb_test "print ul" ".* = 8"
+    
+    # Continue; should stop at call1b and print actual arguments.
+    if [gdb_test "cont" ".* call1b \\(us=6, ui=7, ul=8, uc=98 'b'\\) .*" "continue to call1b"] {
+	gdb_suppress_tests; 
+    }
+
+    # Continue; should stop at call1c and print actual arguments.
+    if [gdb_test "cont" ".* call1c \\(ui=7, ul=8, uc=98 'b', us=6\\) .*" "continue to call1c"] {
+	gdb_suppress_tests; 
+    }
+
+    # Continue; should stop at call1d and print actual arguments.
+    if [gdb_test "cont" ".* call1d \\(ul=8, uc=98 'b', us=6, ui=7\\) .*" "continue to call1d"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call1e and print actual arguments.
+    if [gdb_test "cont" ".* call1e \\(uc1=98 'b', ul=8, uc2=98 'b', ui=7, uc3=98 'b', us=6, uc4=98 'b', uc5=98 'b'\\) .*" "continue to call1e"] {
+	gdb_suppress_tests;
+    }
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; integrals mixed with floating point.
+#
+
+proc float_and_integral_args {} {
+    global gdb_prompt
+    global det_file
+    global gcc_compiled
+
+    delete_breakpoints
+
+    gdb_breakpoint call2a
+    gdb_breakpoint call2b
+    gdb_breakpoint call2c
+    gdb_breakpoint call2d
+    gdb_breakpoint call2e
+    gdb_breakpoint call2f
+    gdb_breakpoint call2g
+    gdb_breakpoint call2h
+
+    # Run; should stop at call2a and print actual arguments.
+
+    setup_xfail "i960-*-*" 1813
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "mips-sgi-irix5*" }
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call2a \\(c=97 'a', f1=4, s=1, d1=5, i=2, f2=4, l=3, d2=5\\) .*$gdb_prompt $" { pass "run to call2a" }
+	 -re "$gdb_prompt $" { fail "run to call2a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call2a" ; gdb_suppress_tests; }
+    }
+
+    # Print each arg as a double check to see if we can print
+    gdb_test "print c" ".* = 97 'a'" "print c after run to call2a"
+    gdb_test "print f1" ".* = 4" "print f1 after run to call2a"
+    gdb_test "print s" ".* = 1" "print s after run to call2a"
+    gdb_test "print d1" ".* = 5" "print d1 after run to call2a"
+    gdb_test "print i" ".* = 2" "print i after run to call2a"
+    gdb_test "print f2" ".* = 4" "print f2 after run to call2a"
+    gdb_test "print l" ".* = 3" "print l after run to call2a"
+    gdb_test "print d2" ".* = 5" "print d2 after run to call2a"
+
+    setup_xfail "rs6000-*-*"
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
+    # Continue; should stop at call2b and print actual arguments.
+    if [gdb_test "cont" ".* call2b \\(f1=4, s=1, d1=5, i=2, f2=4, l=3, d2=5, c=97 'a'\\) .*" "continue to call2b"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2c and print actual arguments.
+    if [gdb_test "cont" ".* call2c \\(s=1, d1=5, i=2, f2=4, l=3, d2=5, c=97 'a', f1=4\\) .*" "continue to call2c"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2d and print actual arguments.
+    if [gdb_test "cont" ".* call2d \\(d1=5, i=2, f2=4, l=3, d2=5, c=97 'a', f1=4, s=1\\) .*" "continue to call2d"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2e and print actual arguments.
+    if [gdb_test "cont" ".* call2e \\(i=2, f2=4, l=3, d2=5, c=97 'a', f1=4, s=1, d1=5\\) .*" "continue to call2e"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2f and print actual arguments.
+    if [gdb_test "cont" ".* call2f \\(f2=4, l=3, d2=5, c=97 'a', f1=4, s=1, d1=5, i=2\\) .*" "continue to call2f"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2g and print actual arguments.
+    if [gdb_test "cont" ".* call2g \\(l=3, d2=5, c=97 'a', f1=4, s=1, d1=5, i=2, f2=4\\) .*" "continue to call2g"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call2h and print actual arguments.
+    if [gdb_test "cont" ".* call2h \\(d2=5, c=97 'a', f1=4, s=1, d1=5, i=2, f2=4, l=3\\) .*" "continue to call2h"] {
+	gdb_suppress_tests;
+    }
+
+    # monitor only allows 8 breakpoints; w89k board allows 10, so
+    # break them up into two groups.
+    delete_breakpoints
+    gdb_breakpoint call2i
+
+    # Continue; should stop at call2i and print actual arguments.
+    if [gdb_test "cont" ".* call2i \\(c1=97 'a', f1=4, c2=97 'a', c3=97 'a', d1=5, c4=97 'a', c5=97 'a', c6=97 'a', f2=4, s=1, c7=97 'a', d2=5\\) .*" "continue to call2i"] {
+	gdb_suppress_tests;
+    }
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; dereference pointers to ints and floats.
+#
+
+proc pointer_args {} {
+    global gdb_prompt
+    global hex
+    global det_file
+
+    delete_breakpoints
+
+    gdb_breakpoint call3a
+    gdb_breakpoint call3b
+    gdb_breakpoint call3c
+
+    # Run; should stop at call3a and print actual arguments.
+    # Try dereferencing the arguments.
+
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call3a \\(cp=$hex \"a\", sp=$hex, ip=$hex, lp=$hex\\) .*$gdb_prompt $" { pass "run to call3a" }
+	 -re "$gdb_prompt $" { fail "run to call3a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call3a" ; gdb_suppress_tests; }
+    }
+
+    gdb_test "print *cp" ".* = 97 'a'"
+    gdb_test "print *sp" ".* = 1"
+    gdb_test "print *ip" ".* = 2"
+    gdb_test "print *lp" ".* = 3"
+
+    # Continue; should stop at call3b and print actual arguments.
+    # Try dereferencing the arguments.
+    if [gdb_test "cont" ".* call3b \\(ucp=$hex \"b\", usp=$hex, uip=$hex, ulp=$hex\\) .*" "continue to call3b"] {
+	gdb_suppress_tests;
+    }
+
+    gdb_test "print *ucp" ".* = 98 'b'"
+    gdb_test "print *usp" ".* = 6"
+    gdb_test "print *uip" ".* = 7"
+    gdb_test "print *ulp" ".* = 8"
+
+    # Continue; should stop at call3c and print actual arguments.
+    # Try dereferencing the arguments.
+    if [gdb_test "cont" ".* call3c \\(fp=$hex, dp=$hex\\) .*" "continue to call3c"] {
+	gdb_suppress_tests;
+    }
+
+    gdb_test "print *fp" ".* = 4"
+    gdb_test "print *dp" ".* = 5"
+
+#    pass "locate actual args, pointer types"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; structures and unions passed by reference.
+#
+
+proc structs_by_reference {} {
+    global gdb_prompt
+    global hex
+    global det_file
+    global target_sizeof_int
+    global target_sizeof_long
+    global target_bigendian_p
+
+    delete_breakpoints
+
+    gdb_breakpoint call4a
+    gdb_breakpoint call4b
+
+    # Run; should stop at call4a and print actual arguments.
+    # Try dereferencing the arguments.
+
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call4a \\(stp=$hex\\) .*$gdb_prompt $" {
+	    pass "run to call4a"
+	}
+	 -re "$gdb_prompt $" { fail "run to call4a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call4a" ; gdb_suppress_tests; }
+    }
+
+    gdb_test "print *stp" ".* = \{s1 = 101, s2 = 102\}"
+
+    # Continue; should stop at call4b and print actual arguments.
+
+    gdb_test "cont" ".* call4b \\(unp=$hex\\) .*" "continue to call4b"
+
+    # Try dereferencing the arguments.
+    if { $target_sizeof_long == $target_sizeof_int } {
+	gdb_test "print *unp" ".* = \{u1 = 1, u2 = 1\}" \
+		"print *unp (sizeof long == sizeof int)"
+    } elseif { ! $target_bigendian_p } {
+	gdb_test "print *unp" ".* = \{u1 = 1, u2 = 1\}" \
+		"print *unp (little-endian, sizeof long != sizeof int)"
+    } elseif { $target_sizeof_long == 8 && $target_sizeof_int == 4 } {
+	gdb_test "print *unp" ".* = \{u1 = 1, u2 = 4294967296\}" \
+		"print *unp (big-endian, sizeof long == 8, sizeof int = 4)"
+    } elseif { $target_sizeof_long == 4 && $target_sizeof_int == 2 } {
+	gdb_test "print *unp" ".* = \{u1 = 1, u2 = 65536\}" \
+		"print *unp (big-endian, sizeof long == 4, sizeof int = 2)"
+    } else {
+	fail "print *unp (unknown case)"
+    }
+
+    pass "locate actual args, structs/unions passed by reference"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; structures and unions passed by value.
+#
+
+proc structs_by_value {} {
+    global gdb_prompt
+    global hex
+    global det_file
+    global target_sizeof_int
+    global target_sizeof_long
+    global target_bigendian_p
+
+    delete_breakpoints
+
+    gdb_breakpoint call5a
+    gdb_breakpoint call5b
+
+    # Run; should stop at call5a and print actual arguments.
+    # Try dereferencing the arguments.
+
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".* call5a \\(st=\{s1 = 101, s2 = 102\}\\) .*$gdb_prompt $" {
+	    pass "run to call5a"
+	}
+	 -re "$gdb_prompt $" { fail "run to call5a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call5a" ; gdb_suppress_tests; }
+    }
+
+    gdb_test "print st" ".* = \{s1 = 101, s2 = 102\}"
+
+    # Continue; should stop at call5b and print actual arguments.
+    if { $target_sizeof_long == $target_sizeof_int } {
+	gdb_test "cont" ".* call5b \\(un=\{u1 = 2, u2 = 2\}\\) .*" \
+		"continue to call5b (sizeof long == sizeof int)"
+    } elseif { ! $target_bigendian_p } {
+	gdb_test "cont" ".* call5b \\(un=\{u1 = 2, u2 = 2\}\\) .*" \
+		"continue to call5b (little-endian, sizeof long != sizeof int)"
+    } elseif { $target_sizeof_long == 8 && $target_sizeof_int == 4 } {
+	gdb_test "cont" ".* call5b \\(un=\{u1 = 2, u2 = 8589934592\}\\) .*" \
+		"continue to call5b (big-endian, sizeof long == 8, sizeof int = 4)"
+    } elseif { $target_sizeof_long == 4 && $target_sizeof_int == 2 } {
+	gdb_test "cont" ".* call5b \\(un=\{u1 = 2, u2 = 131072\}\\) .*" \
+		"continue to call5b (big-endian, sizeof long == 4, sizeof int = 2)"
+    } else {
+	fail "continue to call5b (unknown case)"
+    }
+
+    # Try dereferencing the arguments.
+    if { $target_sizeof_long == $target_sizeof_int } {
+	gdb_test "print un" ".* = \{u1 = 2, u2 = 2\}" \
+		"print un (sizeof long == sizeof int)"
+    } elseif { ! $target_bigendian_p } {
+	gdb_test "print un" ".* = \{u1 = 2, u2 = 2\}" \
+		"print un (little-endian, sizeof long != sizeof int)"
+    } elseif { $target_sizeof_long == 8 && $target_sizeof_int == 4 } {
+	gdb_test "print un" ".* = \{u1 = 2, u2 = 8589934592\}" \
+		"print un (big-endian, sizeof long == 8, sizeof int = 4)"
+    } elseif { $target_sizeof_long == 4 && $target_sizeof_int == 2 } {
+	gdb_test "print un" ".* = \{u1 = 2, u2 = 131072\}" \
+		"print un (big-endian, sizeof long == 4, sizeof int = 2)"
+    } else {
+	fail "print un (unknown case)"
+    }
+
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; discard, shuffle, and call
+#
+
+proc discard_and_shuffle {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global det_file
+    global gcc_compiled
+
+    delete_breakpoints
+
+    gdb_breakpoint call6a
+    gdb_breakpoint call6b
+    gdb_breakpoint call6c
+    gdb_breakpoint call6d
+    gdb_breakpoint call6e
+    gdb_breakpoint call6f
+    gdb_breakpoint call6g
+    gdb_breakpoint call6h
+
+    # Run; should stop at call6a and print actual arguments.
+    # Print backtrace.
+
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".*Breakpoint $decimal, call6a .*$gdb_prompt $" { pass "run to call6a" }
+	 -re "$gdb_prompt $" { fail "run to call6a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call6a" ; gdb_suppress_tests; }
+    }
+
+    setup_xfail "rs6000-*-*"
+
+    if {!$gcc_compiled} {
+	setup_xfail "mips-sgi-irix5*"
+    }
+
+    if [gdb_test "backtrace 100" " call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6a"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6b and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6b
+
+    if [gdb_test "backtrace 100" " call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6b"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6c and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6c
+
+    if [gdb_test "backtrace 100" " call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6c"] {
+	gdb_suppress_tests;
+    }
+    # Continue; should stop at call6d and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6d
+
+    if [gdb_test "backtrace 100" " call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6d"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6e and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6e
+
+    if [gdb_test "backtrace 100" " call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6e"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6f and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6f
+
+    if [gdb_test "backtrace 100" " call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6f"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6g and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6g
+
+    if [gdb_test "backtrace 100" " call6g \\(uc=98 'b', us=6, ui=7, ul=8\\).* call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6g"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6h and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6h
+
+    if [gdb_test "backtrace 100" " call6h \\(us=6, ui=7, ul=8\\).* call6g \\(uc=98 'b', us=6, ui=7, ul=8\\).* call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6h"] {
+	gdb_suppress_tests;
+    }
+
+    # monitor only allows 8 breakpoints; w89k board allows 10, so
+    # break them up into two groups.
+    delete_breakpoints
+    gdb_breakpoint call6i
+    gdb_breakpoint call6j
+    gdb_breakpoint call6k
+
+    # Continue; should stop at call6i and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6i
+
+    if [gdb_test "backtrace 100" " call6i \\(ui=7, ul=8\\).* call6h \\(us=6, ui=7, ul=8\\).* call6g \\(uc=98 'b', us=6, ui=7, ul=8\\).* call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6i"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6j and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call6j
+
+    if [gdb_test "backtrace 100" " call6j \\(ul=8\\).* call6i \\(ui=7, ul=8\\).* call6h \\(us=6, ui=7, ul=8\\).* call6g \\(uc=98 'b', us=6, ui=7, ul=8\\).* call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6j"] {
+	gdb_suppress_tests;
+    }
+
+    # Continue; should stop at call6k and print actual arguments.
+    # Print backtrace.
+    # This fails on i960-*-vxworks because gdb gets confused by
+    # breakpoints on adjacent instructions.
+    setup_xfail "i960-*-vxworks" 1786
+    gdb_continue call6k
+
+    if [gdb_test "backtrace 100" " call6k \\(\\).* call6j \\(ul=8\\).* call6i \\(ui=7, ul=8\\).* call6h \\(us=6, ui=7, ul=8\\).* call6g \\(uc=98 'b', us=6, ui=7, ul=8\\).* call6f \\(d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6e \\(f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6d \\(l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6c \\(i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6b \\(s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* call6a \\(c=97 'a', s=1, i=2, l=3, f=4, d=5, uc=98 'b', us=6, ui=7, ul=8\\).* main \\(.*\\).*" "backtrace from call6k"] {
+	gdb_suppress_tests;
+    }
+    gdb_stop_suppressing_tests;
+}
+
+
+#
+# Locate actual args; shuffle round robin and call
+#
+
+proc shuffle_round_robin {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global det_file
+    global gcc_compiled
+
+    delete_breakpoints
+
+    gdb_breakpoint call7a
+    gdb_breakpoint call7b
+    gdb_breakpoint call7c
+    gdb_breakpoint call7d
+    gdb_breakpoint call7e
+    gdb_breakpoint call7f
+    gdb_breakpoint call7g
+    gdb_breakpoint call7h
+
+    # Run; should stop at call7a and print actual arguments.
+    # Print backtrace.
+
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+    setup_xfail "a29k-*-udi"
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".*Breakpoint $decimal, call7a .*$gdb_prompt $" {
+	    pass "run to call7a"
+	}
+	 -re "$gdb_prompt $" { fail "run to call7a" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to call7a" ; gdb_suppress_tests; }
+    }
+
+    setup_xfail "i960-*-*" 1813
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "mips-sgi-irix5*" }
+    gdb_test "backtrace 100" " call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7a"
+
+    # Continue; should stop at call7b and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7b
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+
+    gdb_test "backtrace 100" " call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7b"
+
+    # Continue; should stop at call7c and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7c
+
+    gdb_test "backtrace 100" " call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7c"
+
+    # Continue; should stop at call7d and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7d
+
+    gdb_test "backtrace 100" " call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7d"
+
+    gdb_continue call7e
+
+    gdb_test "backtrace 100" " call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7e"
+
+    # Continue; should stop at call7f and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7f
+
+    gdb_test "backtrace 100" " call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7f"
+
+    # Continue; should stop at call7g and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7g
+
+    gdb_test "backtrace 100" " call7g \\(d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b'\\).* call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7g"
+
+    gdb_continue call7h
+
+    gdb_test "backtrace 100" " call7h \\(us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5\\).* call7g \\(d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b'\\).* call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7h"
+
+    # monitor only allows 8 breakpoints; w89k board allows 10, so
+    # break them up into two groups.
+    delete_breakpoints
+    gdb_breakpoint call7i
+    gdb_breakpoint call7j
+    gdb_breakpoint call7k
+
+    # Continue; should stop at call7i and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7i
+
+    gdb_test "backtrace 100" " call7i \\(ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6\\).* call7h \\(us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5\\).* call7g \\(d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b'\\).* call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7i"
+
+    # Continue; should stop at call7j and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7j
+
+    gdb_test "backtrace 100" " call7j \\(ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8\\).* call7i \\(ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6\\).* call7h \\(us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5\\).* call7g \\(d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b'\\).* call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7j"
+
+    # Continue; should stop at call7k and print actual arguments.
+    # Print backtrace.
+
+    gdb_continue call7k
+
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
+    gdb_test "backtrace 100" " call7k \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* call7j \\(ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8\\).* call7i \\(ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6\\).* call7h \\(us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5\\).* call7g \\(d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b'\\).* call7f \\(uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3, f=4\\).* call7e \\(f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1, l=3\\).* call7d \\(l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2, s=1\\).* call7c \\(s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a', i=2\\).* call7b \\(i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7, c=97 'a'\\).* call7a \\(c=97 'a', i=2, s=1, l=3, f=4, uc=98 'b', d=5, us=6, ul=8, ui=7\\).* main \\(.*\\).*" "backtrace from call7k"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Locate actual args; recursive passing of structs by value
+#
+
+proc recursive_structs_by_value {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global det_file
+
+    delete_breakpoints
+
+    gdb_breakpoint hitbottom
+
+    # Run; should stop at hitbottom and print actual arguments.
+    # Print backtrace.
+    gdb_run_cmd
+    gdb_expect {
+	 -re ".*Breakpoint $decimal, hitbottom .*$gdb_prompt $" { pass "run to hitbottom" }
+	 -re "$gdb_prompt $" { fail "run to hitbottom" ; gdb_suppress_tests; }
+	 timeout { fail "(timeout) run to hitbottom" ; gdb_suppress_tests; }
+    }
+
+    if ![istarget sparclet-*-*] {
+    # The a29k fails all of these tests, perhaps because the prologue
+    # code is broken.
+	setup_xfail "a29k-*-udi"
+	gdb_test "backtrace 100" " hitbottom \\(\\).* recurse \\(a=\{s = 0, i = 0, l = 0\}, depth=0\\).* recurse \\(a=\{s = 1, i = 1, l = 1\}, depth=1\\).* recurse \\(a=\{s = 2, i = 2, l = 2\}, depth=2\\).* recurse \\(a=\{s = 3, i = 3, l = 3\}, depth=3\\).* recurse \\(a=\{s = 4, i = 4, l = 4\}, depth=4\\).* test_struct_args \\(\\).* main \\(.*\\).*" "recursive passing of structs by value"
+    } else {
+	fail "recursive passing of structs by value (sparclet)"
+    }
+    gdb_stop_suppressing_tests;
+}
+
+proc funcargs_reload { } {
+    global objdir
+    global subdir
+    global binfile
+    global srcdir
+
+    if [istarget "mips-idt-*"] {
+	# Restart because IDT/SIM runs out of file descriptors.
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load ${binfile}
+    }
+}
+
+#
+# Test for accessing local stack variables in functions which call alloca
+#
+proc localvars_after_alloca { } {
+    global gdb_prompt
+    global hex
+    global decimal
+    global gcc_compiled
+
+    if { ! [ runto localvars_after_alloca ] } then { gdb_suppress_tests; }
+
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print c" " = 97 'a'" "print c after runto localvars_after_alloca"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print s" " = 1" "print s after runto localvars_after_alloca"
+    gdb_test "print i" " = 2" "print i after runto localvars_after_alloca"
+    gdb_test "print l" " = 3" "print l after runto localvars_after_alloca"
+
+    # Lame regexp.
+    gdb_test "next" ".*" "next in localvars_after_alloca()"
+
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+
+    gdb_test "print c" " = 97 'a'" "print c in localvars_after_alloca"
+    gdb_test "print s" " = 1" "print s in localvars_after_alloca"
+    gdb_test "print i" " = 2" "print i in localvars_after_alloca"
+    gdb_test "print l" " = 3" "print l in localvars_after_alloca"
+
+    gdb_test "backtrace 8" "#0.*localvars_after_alloca \\(c=97 'a', s=1, i=2, l=3\\).*#1.*main.*" "backtrace after alloca"
+    gdb_stop_suppressing_tests;
+}
+
+proc call_after_alloca { } {
+    global gdb_prompt
+    global hex
+    global decimal
+    global gcc_compiled
+
+    if { ! [ runto call_after_alloca_subr ] } then { gdb_suppress_tests; }
+
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print c" " = 97 'a'" "print c in call_after_alloca"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print s" " = 1" "print s in call_after_alloca"
+    gdb_test "print i" " = 2" "print i in call_after_alloca"
+    gdb_test "print l" " = 3" "print l in call_after_alloca"
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "backtrace 8" "#0.*call_after_alloca_subr \\(c=97 'a', s=1, i=2, l=3, uc=98 'b', us=11, ui=12, ul=13\\).*#1.*call_after_alloca \\(c=97 'a', s=1, i=2, l=3\\).*#2.*main.*" "backtrace from call_after_alloca_subr"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Test for accessing local stack variables, backtraces, finish,
+# and finally stepping into indirect calls.  The point is that on the PA
+# these use a funky `dyncall' mechanism which GDB needs to know about.
+#
+proc localvars_in_indirect_call { } {
+    global gdb_prompt
+    global hex
+    global decimal
+    global gcc_compiled
+
+    # Can not use "runto call0a" as call0a is called several times
+    # during single run.  Instead stop in a marker function and
+    # take control from there.
+    if { ! [ runto marker_indirect_call ] } then { gdb_suppress_tests; }
+
+    # break on the next call to call0a, then delete all the breakpoints
+    # and start testing.
+    gdb_breakpoint call0a
+    gdb_continue call0a
+    delete_breakpoints
+    
+    # Print each arg as a double check to see if we can print
+    # them here as well as with backtrace.
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print c" " = 97 'a'" "print c in localvars_in_indirect_call"
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print s" " = 1" "print s in localvars_in_indirect_call"
+    gdb_test "print i" " = 2" "print i in localvars_in_indirect_call"
+    gdb_test "print l" " = 3" "print l in localvars_in_indirect_call"
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "backtrace 8" \
+	"#0.*call0a \\(c=97 'a', s=1, i=2, l=3\\).*#1.*main.*" \
+	"backtrace in indirectly called function"
+
+    # 
+    # "finish" brings us back to main.  We then will try to step through
+    # the second indirect call.  
+    # On some targets (e.g. m68k) gdb will stop from the finish in midline
+    # of the first indirect call. This is due to stack adjustment instructions
+    # after the indirect call. In these cases we will step till we hit the
+    # second indirect call.
+    #
+
+    send_gdb "finish\n"
+    gdb_expect {
+	 -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	 -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
+	    pass "finish from indirectly called function"
+	}
+	 -re ".*$gdb_prompt $" {
+	    fail "finish from indirectly called function"
+	    gdb_suppress_tests;
+	}
+	 default { fail "finish from indirectly called function" ; gdb_suppress_tests; }
+    }
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "step" "call0a \\(c=97 'a', s=1, i=2, l=3\\).*" \
+	"stepping into indirectly called function"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Test for stepping into indirect calls which may have trampolines (possibly
+# cascaded) on both the call path and the gdb_suppress_tests; path.
+# to handle trampolines.
+#
+proc test_stepping_over_trampolines { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    # Stop in a marker function and take control from there.
+    if { ! [ runto marker_call_with_trampolines ] } then { gdb_suppress_tests; }
+
+    # Cater for gdb stopping in midline, see comment for finish above.
+    send_gdb "finish\n"
+    gdb_expect {
+	 -re "marker_call_with_trampolines ..;.*$gdb_prompt $" {
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	 -re "pointer_to_call_with_trampolines.*$gdb_prompt $" {
+	    pass "finish from marker_call_with_trampolines"
+	}
+	 -re ".*$gdb_prompt $" {
+	    fail "finish from marker_call_with_trampolines"
+	}
+	 default { fail "finish from marker_call_with_trampolines" ; gdb_suppress_tests; }
+    }
+
+    # Try to step into the target function.
+    gdb_test "step" "call_with_trampolines \\(d1=5\\).*" \
+	"stepping into function called with trampolines"
+
+    # Make we can backtrace and the argument looks correct.  */
+    gdb_test "backtrace 8" "#0.*call_with_trampolines \\(d1=5\\).*1.*main.*" \
+	"backtrace through call with trampolines"
+
+    # Make sure we can get back to main.
+    # Stepping back to main might stop again after the gdb_suppress_tests; statement
+    # or immediately transfer control back to main if optimizations
+    # are performed.
+    send_gdb "step\n"
+    gdb_expect {
+	 -re "main .* at.*$gdb_prompt $" {
+	    pass "stepping back to main from function called with trampolines" ;
+	}
+	 -re "\}.*End of call_with_trampolines.*$gdb_prompt $" {
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	 -re ".*$gdb_prompt $" {
+	    fail "stepping back to main from function called with trampolines"
+	}
+	 default { fail "stepping back to main from function called with trampolines" ; gdb_suppress_tests; }
+    }
+    gdb_stop_suppressing_tests;
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if [istarget "mips*tx39-*"] {
+    set timeout 300
+} elseif [istarget "hppa*-hp-hpux*"] then {
+    set timeout 240
+} else {
+    set timeout 60
+}
+
+# Determine expected output for unsigned long variables,
+# the output varies with sizeof (unsigned long).
+
+set target_sizeof_long 4
+send_gdb "print sizeof (long)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4.*$gdb_prompt $" { }
+    -re ".\[0-9\]* = 8.*$gdb_prompt $" { set target_sizeof_long 8 } 
+    -re ".*$gdb_prompt $" {
+	 fail "getting sizeof long"
+    }
+    default	{ fail "(timeout) getting sizeof long" }
+}
+
+set target_sizeof_int 4
+send_gdb "print sizeof (int)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" { set target_sizeof_int 2 }
+    -re ".\[0-9\]* = 4.*$gdb_prompt $" { }
+    -re ".\[0-9\]* = 8.*$gdb_prompt $" { set target_sizeof_int 8 } 
+    -re ".*$gdb_prompt $" {
+	 fail "getting sizeof unsigned long"
+    }
+    default	{ fail "(timeout) getting sizeof int" }
+}
+
+set target_bigendian_p 1
+send_gdb "show endian\n"
+gdb_expect {
+    -re ".*little endian.*$gdb_prompt $" { set target_bigendian_p 0 }
+    -re ".*big endian.*$gdb_prompt $" { }
+    -re ".*$gdb_prompt $" {
+	 fail "getting target endian"
+    }
+    default	{ fail "(timeout) getting target endian" }
+}
+
+# Perform tests
+
+integral_args
+funcargs_reload
+unsigned_integral_args
+funcargs_reload
+float_and_integral_args
+funcargs_reload
+pointer_args
+funcargs_reload
+structs_by_reference
+funcargs_reload
+structs_by_value
+funcargs_reload
+discard_and_shuffle
+funcargs_reload
+shuffle_round_robin
+funcargs_reload
+recursive_structs_by_value
+funcargs_reload
+localvars_after_alloca
+funcargs_reload
+call_after_alloca
+funcargs_reload
+localvars_in_indirect_call
+funcargs_reload
+test_stepping_over_trampolines
diff --git a/gdb/testsuite/gdb.base/gdbvars.exp b/gdb/testsuite/gdb.base/gdbvars.exp
new file mode 100644
index 0000000..2ab37e0
--- /dev/null
+++ b/gdb/testsuite/gdb.base/gdbvars.exp
@@ -0,0 +1,117 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+proc test_convenience_variables {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 101"	"" \
+	"Set a new convenience variable"
+
+    gdb_test "print \$foo"		" = 101" \
+	"Print contents of new convenience variable"
+
+    gdb_test "set \$foo = 301"	"" \
+	"Set convenience variable to a new value"
+
+    gdb_test "print \$foo"		" = 301" \
+	"Print new contents of convenience variable"
+
+    gdb_test "set \$_ = 11"		"" \
+	"Set convenience variable \$_"
+
+    gdb_test "print \$_"		" = 11" \
+	"Print contents of convenience variable \$_"
+
+    gdb_test "print \$foo + 10"	" = 311" \
+	"Use convenience variable in arithmetic expression"
+
+    gdb_test "print (\$foo = 32) + 4"	" = 36" \
+	"Use convenience variable assignment in arithmetic expression"
+
+    gdb_test "print \$bar"		" = void" \
+	"Print contents of uninitialized convenience variable"
+}
+
+proc test_value_history {} {
+    global gdb_prompt
+
+    gdb_test "print 101"	"\\\$1 = 101" \
+	"Set value-history\[1\] using \$1"
+
+    gdb_test "print 102" 	"\\\$2 = 102" \
+	"Set value-history\[2\] using \$2"
+
+    gdb_test "print 103"	"\\\$3 = 103" \
+	"Set value-history\[3\] using \$3"
+
+    gdb_test "print \$\$"	"\\\$4 = 102" \
+	"Print value-history\[MAX-1\] using inplicit index \$\$"
+
+    gdb_test "print \$\$"	"\\\$5 = 103" \
+	"Print value-history\[MAX-1\] again using implicit index \$\$"
+
+    gdb_test "print \$"	"\\\$6 = 103" \
+	"Print value-history\[MAX\] using implicit index \$"
+
+    gdb_test "print \$\$2"	"\\\$7 = 102" \
+	"Print value-history\[MAX-2\] using explicit index \$\$2"
+
+    gdb_test "print \$0"	"\\\$8 = 102" \
+	"Print value-history\[MAX\] using explicit index \$0"
+
+    gdb_test "print 108"	"\\\$9 = 108" ""
+
+    gdb_test "print \$\$0"	"\\\$10 = 108" \
+	"Print value-history\[MAX\] using explicit index \$\$0"
+
+    gdb_test "print \$1"	"\\\$11 = 101" \
+	"Print value-history\[1\] using explicit index \$1"
+
+    gdb_test "print \$2"	"\\\$12 = 102" \
+	"Print value-history\[2\] using explicit index \$2"
+
+    gdb_test "print \$3"	"\\\$13 = 103" \
+	"Print value-history\[3\] using explicit index \$3"
+
+    gdb_test "print \$-3"	"\\\$14 = 100" \
+	"Print (value-history\[MAX\] - 3) using implicit index \$"
+
+    gdb_test "print \$1 + 3"	"\\\$15 = 104" \
+	"Use value-history element in arithmetic expression"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+test_value_history
+test_convenience_variables
diff --git a/gdb/testsuite/gdb.base/grbx.c b/gdb/testsuite/gdb.base/grbx.c
new file mode 100644
index 0000000..92f7323
--- /dev/null
+++ b/gdb/testsuite/gdb.base/grbx.c
@@ -0,0 +1,10 @@
+static int grbxx __attribute__ ((section (".data03"))) = 'g' + 'r' + 'b' + 'x';
+
+int grbx (int x)
+{
+  if (x)
+    return grbxx;
+  else
+    return 0;
+}
+
diff --git a/gdb/testsuite/gdb.base/help.exp b/gdb/testsuite/gdb.base/help.exp
new file mode 100644
index 0000000..54bfdb1
--- /dev/null
+++ b/gdb/testsuite/gdb.base/help.exp
@@ -0,0 +1,542 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1997, 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+#
+# test gdb help commands
+#
+
+set prms_id 0
+set bug_id 0
+
+gdb_start
+
+# force the height of the debugger to be pretty large so no pagers getused
+gdb_test "set height 400" "" "test set height"
+
+# use a larger expect input buffer for long help outputs.
+# test help add-symbol-file
+gdb_test "help add-symbol-file" "Usage: add-symbol-file FILE ADDR.*\[\r\n\]+Load the symbols from FILE, assuming FILE has been dynamically loaded..*\[\r\n\]+ADDR is the starting address of the file\'s text."  "help add-symbol-file"
+# test help aliases
+gdb_test "help aliases" "Aliases of other commands..*\[\r\n\]+List of commands\:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help aliases"
+gdb_test "help attach" "Attach to a process or file outside of GDB..*\[\r\n\]+This command attaches to another target, of the same type as your last.*\[\r\n\]+\"target\" command .\"info files\" will show your target stack.*\[\r\n\]+The command may take as argument a process id or a device file..*\[\r\n\]+For a process id, you must have permission to send the process a signal,.*\[\r\n\]+and it must have the same effective uid as the debugger..*\[\r\n\]+When using \"attach\" with a process id, the debugger finds the.*\[\r\n\]+program running in the process, looking first in the current working.*\[\r\n\]+directory, or .if not found there. using the source file search path.*\[\r\n\]+\\(see the \"directory\" command\\).  You can also use the \"file\" command.*\[\r\n\]+to specify the program, and to load its symbol table." "help attach"
+# test help breakpoint "b" abbreviation
+gdb_test "help b" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"b\" abbreviation"
+# test help breakpoint "br" abbreviation
+gdb_test "help br" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"br\" abbreviation"
+# test help breakpoint "bre" abbreviation
+gdb_test "help bre" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"bre\" abbreviation"
+# test help breakpoint "brea" abbreviation
+gdb_test "help brea" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"brea\" abbreviation"
+# test help breakpoint "break" abbreviation
+gdb_test "help break" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"break\" abbreviation"
+# test help breakpoints
+gdb_test "help breakpoints" "Making program stop at certain points..*\[\r\n\]+List of commands\:.*\[\r\n\]+awatch -- Set a watchpoint for an expression.*\[\r\n\]+break -- Set breakpoint at specified line or function.*\[\r\n\]+catch -- Set catchpoints to catch events.*\[\r\n\]+clear -- Clear breakpoint at specified line or function.*\[\r\n\]+commands -- Set commands to be executed when a breakpoint is hit.*\[\r\n\]+condition -- Specify breakpoint number N to break only if COND is true.*\[\r\n\]+delete -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+disable -- Disable some breakpoints.*\[\r\n\]+enable -- Enable some breakpoints.*\[\r\n\]+hbreak -- Set a hardware assisted  breakpoint.*\[\r\n\]+ignore -- Set ignore-count of breakpoint number N to COUNT.*\[\r\n\]+rwatch -- Set a read watchpoint for an expression.*\[\r\n\]+tbreak -- Set a temporary breakpoint.*\[\r\n\]+tcatch -- Set temporary catchpoints to catch events.*\[\r\n\]+thbreak -- Set a temporary hardware assisted breakpoint.*\[\r\n\]+watch -- Set a watchpoint for an expression.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help breakpoints"
+# test help backtrace "bt" abbreviation
+gdb_test "help bt" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help backtrace \"bt\" abbreviation"
+# test help backtrace
+gdb_test "help backtrace" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help backtrace"
+# test help continue "c" abbreviation
+gdb_test "help c" "Continue program being debugged.*"  "help continue \"c\" abbreviation"
+# test help continue
+gdb_test "help continue" "Continue program being debugged.*"  "help continue"
+# test help call
+gdb_test "help call" "Call a function.*"  "help call"
+# test help catch
+gdb_test "help catch" "Set catchpoints to catch events.*Raised signals may be caught:.*catch signal.*all signals.*catch signal.*signame.*a particular signal.*Raised exceptions may be caught:.*catch throw.*all exceptions, when thrown.*catch throw.*exceptname.*a particular exception, when thrown.*catch catch.*all exceptions, when caught.*catch catch.*exceptname.*a particular exception, when caught.*Thread or process events may be caught:.*catch thread_start.*any threads, just after creation.*catch thread_exit.*any threads, just before expiration.*catch thread_join.*any threads, just after joins.*catch start.*any processes, just after creation.*catch exit.*any processes, just before expiration.*catch fork.*calls to fork.*catch vfork.*calls to vfork.*catch exec.*calls to exec.*Dynamically.linked library events may be caught:.*catch load.*loads of any library.*catch load.*libname.*loads of a particular library.*catch unload.*unloads of any library.*catch unload.*libname.*unloads of a particular library.*The act of your program's execution stopping may also be caught:.*catch stop.*Do.*help set follow-fork-mode.*for info on debugging your program.*after a fork or vfork is caught.*Do.*help breakpoints.*for info on other commands dealing with breakpoints." "help catch"
+# test help cd
+gdb_test "help cd" "Set working directory to DIR for debugger and program being debugged..*\[\r\n\]+The change does not take effect for the program being debugged.*\[\r\n\]+until the next time it is started." "help cd"
+# test help clear
+gdb_test "help clear" "Clear breakpoint at specified line or function.*\[\r\n\]+Argument may be line number, function name, or .* and an address.*\[\r\n\]+If line number is specified, all breakpoints in that line are cleared.*\[\r\n\]+If function is specified, breakpoints at beginning of function are cleared.*\[\r\n\]+If an address is specified, breakpoints at that address are cleared.*\[\r\n\]+With no argument, clears all breakpoints in the line that the selected frame.*\[\r\n\]+is executing in..*\[\r\n\]+See also the \"delete\" command which clears breakpoints by number." "help clear"
+# test help commands
+gdb_test "help commands" "Set commands to be executed when a breakpoint is hit..*\[\r\n\]+Give breakpoint number as argument after \"commands\"..*\[\r\n\]+With no argument, the targeted breakpoint is the last one set..*\[\r\n\]+The commands themselves follow starting on the next line..*\[\r\n\]+Type a line containing \"end\" to indicate the end of them..*\[\r\n\]+Give \"silent\" as the first line to make the breakpoint silent;.*\[\r\n\]+then no output is printed when it is hit, except what the commands print." "help commands"
+# test help condition
+gdb_test "help condition" "Specify breakpoint number N to break only if COND is true..*\[\r\n\]+Usage is `condition N COND', where N is an integer and COND is an.*\[\r\n\]+expression to be evaluated whenever breakpoint N is reached.  " "help condition"
+# test help core-file
+gdb_test "help core-file" "Use FILE as core dump for examining memory and registers..*\[\r\n\]+No arg means have no core file.  This command has been superseded by the.*\[\r\n\]+`target core' and `detach' commands." "help core-file"
+# test help delete "d" abbreviation
+gdb_test "help d" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+Also a prefix command for deletion of other GDB objects..*\[\r\n\]+The \"unset\" command is also an alias for \"delete\"..*\[\r\n\]+List of delete subcommands:.*\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops.*\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help delete \"d\" abbreviation"
+# test help delete
+gdb_test "help delete" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+Also a prefix command for deletion of other GDB objects..*\[\r\n\]+The \"unset\" command is also an alias for \"delete\"..*\[\r\n\]+List of delete subcommands:.*\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops.*\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help delete"
+# test help data
+gdb_test "help data" ".*\[\r\n\]+Examining data..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help data"
+# test help define
+gdb_test "help define" "Define a new command.*"  "help define"
+# test help delete breakpoints
+gdb_test "help delete breakpoints" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+This command may be abbreviated \"delete\"." "help delete breakpoints"
+# test help delete display
+gdb_test "help delete display" "Cancel some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means cancel all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help delete display"
+# test help detach
+gdb_test "help detach" "Detach a process or file previously attached.\[\r\n\]+If a process, it is no longer traced, and it continues its execution.\[ \r\n\]+If\[ \r\n\]+you were debugging a file, the file is closed and gdb no longer accesses it." "help detach"
+# test help directory
+gdb_test "help directory" "Add directory DIR to beginning of search path for source files..*\[\r\n\]+Forget cached info on source file locations and line positions..*\[\r\n\]+DIR can also be .cwd for the current working directory, or .cdir for the.*\[\r\n\]+directory in which the source file was compiled into object code..*\[\r\n\]+With no argument, reset the search path to .cdir:.cwd, the default." "help directory"
+# test help disable "dis" abbreviation
+gdb_test "help dis" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable \"dis\" abbreviation"
+# test help disable "disa" abbreviation
+gdb_test "help disa" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable \"disa\" abbreviation"
+# test help disable
+gdb_test "help disable" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable"
+# test help disable breakpoints
+gdb_test "help disable breakpoints" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+This command may be abbreviated \"disable\"." "help disable breakpoints"
+# test help disable display
+gdb_test "help disable display" "Disable some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means disable all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help disable display"
+# test help disassemble
+gdb_test "help disassemble" "Disassemble a specified section of memory..*\[\r\n\]+Default is the function surrounding the pc of the selected frame..*\[\r\n\]+With a single argument, the function surrounding that address is dumped..*\[\r\n\]+Two arguments are taken as a range of memory to dump." "help disassemble"
+# test help display
+gdb_test "help display" "Print value of expression EXP each time the program stops..*\[\r\n\]+/FMT may be used before EXP as in the \"print\" command..*\[\r\n\]+/FMT \"i\" or \"s\" or including a size-letter is allowed,.*\[\r\n\]+as in the \"x\" command, and then EXP is used to get the address to examine.*\[\r\n\]+and examining is done as in the \"x\" command..*\[\r\n\]+With no argument, display all currently requested auto-display expressions..*\[\r\n\]+Use \"undisplay\" to cancel display requests previously made." "help display"
+# test help do
+gdb_test "help do" "Select and print stack frame called by this one..*\[\r\n\]+An argument says how many frames down to go." "help do"
+# test help document
+gdb_test "help document" "Document a user-defined command..*\[\r\n\]+Give command name as argument.  Give documentation on following lines..*\[\r\n\]+End with a line of just \"end\"." "help document"
+# test help down
+gdb_test "help down" "Select and print stack frame called by this one..*\[\r\n\]+An argument says how many frames down to go." "help down"
+# test help down-silently
+gdb_test "help down-silently" "Same as the `down' command, but does not print anything..*\[\r\n\]+This is useful in command scripts." "help down-silently"
+# this command was removed from GDB 4.5.8
+# test help dump-me
+#send_gdb "help dump-me"
+# -re "Get fatal error; make debugger dump its core."
+# 
+# }
+# test help echo
+gdb_test "help echo" "Print a constant string.  Give string as argument..*\[\r\n\]+C escape sequences may be used in the argument..*\[\r\n\]+No newline is added at the end of the argument;.*\[\r\n\]+use \".n\" if you want a newline to be printed..*\[\r\n\]+Since leading and trailing whitespace are ignored in command arguments,.*\[\r\n\]+if you want to print some you must use \".\" before leading whitespace.*\[\r\n\]+to be printed or after trailing whitespace." "help echo"
+# test help enable breakpoints delete
+gdb_test "help enable breakpoints delete" "Enable breakpoints and delete when hit.  Give breakpoint numbers..*\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted." "help enable breakpoints delete"
+# test help enable breakpoints once
+gdb_test "help enable breakpoints once" "Enable breakpoints for one hit..*"  "help enable breakpoints once"
+# test help enable breakpoints
+gdb_test "help enable breakpoints" "Enable some breakpoints..*\[\r\n\]+Give breakpoint numbers .separated by spaces. as arguments..*\[\r\n\]+This is used to cancel the effect of the \"disable\" command..*\[\r\n\]+May be abbreviated to simply \"enable\"..*.*\[\r\n\]+List of enable breakpoints subcommands:.*\[\r\n\]+enable breakpoints delete -- Enable breakpoints and delete when hit.*\[\r\n\]+enable breakpoints once -- Enable breakpoints for one hit.*\[\r\n\]+Type \"help enable breakpoints\" followed by enable breakpoints subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help enable breakpoints"
+# test help enable delete
+gdb_test "help enable delete" "Enable breakpoints and delete when hit.  Give breakpoint numbers..*\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted." "help enable delete"
+# test help enable display
+gdb_test "help enable display" "Enable some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to resume displaying..*\[\r\n\]+No argument means enable all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help enable display"
+# test help enable once
+gdb_test "help enable once" "Enable breakpoints for one hit.*"  "help enable once"
+# test help enable
+gdb_test "help enable" "Enable some breakpoints..*\[\r\n\]+Give breakpoint numbers .separated by spaces. as arguments..*\[\r\n\]+With no subcommand, breakpoints are enabled until you command otherwise..*\[\r\n\]+This is used to cancel the effect of the \"disable\" command..*\[\r\n\]+With a subcommand you can enable temporarily..*\[\r\n\]+List of enable subcommands:.*\[\r\n\]+enable delete -- Enable breakpoints and delete when hit.*\[\r\n\]+enable display -- Enable some expressions to be displayed when program stops.*\[\r\n\]+enable once -- Enable breakpoints for one hit.*\[\r\n\]+Type \"help enable\" followed by enable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help enable"
+# test help exec-file
+gdb_test "help exec-file" "Use FILE as program for getting contents of pure memory..*\[\r\n\]+If FILE cannot be found as specified, your execution directory path.*\[\r\n\]+is searched for a command of that name..*\[\r\n\]+No arg means have no executable file." "help exec-file"
+# test help frame "f" abbreviation
+gdb_test "help f" "Select and print a stack frame..*\[\r\n\]+With no argument, print the selected stack frame.  .See also \"info frame\".*\[\r\n\]+An argument specifies the frame to select..*\[\r\n\]+It can be a stack frame number or the address of the frame..*\[\r\n\]+With argument, nothing is printed if input is coming from.*\[\r\n\]+a command file or a user-defined command." "help frame \"f\" abbreviation"
+# test help frame
+gdb_test "help frame" "Select and print a stack frame..*\[\r\n\]+With no argument, print the selected stack frame.  .See also \"info frame\"...*\[\r\n\]+An argument specifies the frame to select..*\[\r\n\]+It can be a stack frame number or the address of the frame..*\[\r\n\]+With argument, nothing is printed if input is coming from.*\[\r\n\]+a command file or a user-defined command." "help frame"
+# test help fg
+gdb_test "help fg" "Continue program being debugged.*"  "help fg"
+# test help file
+gdb_test "help file" "Use FILE as program to be debugged..*\[\r\n\]+It is read for its symbols, for getting the contents of pure memory,.*\[\r\n\]+and it is the program executed when you use the `run' command..*\[\r\n\]+If FILE cannot be found as specified, your execution directory path.*\[\r\n\]+..PATH. is searched for a command of that name..*\[\r\n\]+No arg means to have no executable file and no symbols." "help file"
+# test help files
+gdb_test "help files" "Specifying.*" "help files"
+# test help finish
+gdb_test "help finish" "Execute until selected stack frame returns..*\[\r\n\]+Upon return, the value returned is printed and put in the value history." "help finish"
+# test help forward-search
+gdb_test "help forward-search" "Search for regular expression .see regex.3.. from last line listed..*"  "help forward-search"
+# test help help "h" abbreviation 
+gdb_test "help h" "Print list of commands."  "help help \"h\" abbreviation"
+# test help help
+gdb_test "help help" "Print list of commands."  "help help"
+# test help handle
+gdb_test "help handle" "Specify how to handle a signal..*"  "help handle"
+# test help info "i" abbreviation
+gdb_test "help i" "Generic command for showing things about the program being debugged..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help info \"i\" abbreviation"
+# test help info
+gdb_test "help info" "Generic command for showing things about the program being debugged..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help info"
+# test help ignore
+gdb_test "help ignore" "Set ignore-count of breakpoint number N to COUNT..*\[\r\n\]+Usage is `ignore N COUNT'." "help ignore"
+# test help info address
+gdb_test "help info address" "Describe where symbol SYM is stored."  "help info address"
+# test help info all-registers
+gdb_test "help info all-registers" "List of all registers and their contents, for selected stack frame..*\[\r\n\]+Register name as argument means describe only that register." "help info all-registers"
+# test help info args
+gdb_test "help info args" "Argument variables of current stack frame."  "help info args"
+# test help info breakpoints
+gdb_test "help info breakpoints" "Status of user-settable breakpoints, or breakpoint number NUMBER..*\[\r\n\]+breakpoint set." "help info breakpoints"
+# test help info catch
+gdb_test "help info catch" "Exceptions that can be caught in the current stack frame."  "help info catch"
+# test help info copying
+gdb_test "help info copying" "Conditions for redistributing copies of GDB."  "help info copying"
+# test help info display
+gdb_test "help info display" "Expressions to display when program stops, with code numbers."  "help info display"
+# test help info frame "f" abbreviation
+gdb_test "help info f" "All about selected stack frame, or frame at ADDR."  "help info frame \"f\" abbreviation"
+# test help info frame
+gdb_test "help info frame" "All about selected stack frame, or frame at ADDR."  "help info frame"
+# test help info files
+gdb_test "help info files" "Names of targets and files being debugged..*\[\r\n\]+Shows the entire stack of targets currently in use .including the exec-file,.*\[\r\n\]+core-file, and process, if any., as well as the symbol file name." "help info files"
+# test help info float
+gdb_test "help info float" "Print the status of the floating point unit"  "help info float"
+# test help info functions
+gdb_test "help info functions" "All function names, or those matching REGEXP."  "help info functions"
+# test help info line
+gdb_test "help info line" "Core addresses of the code for a source line..*\[\r\n\]+Line can be specified as.*\[\r\n\]+  LINENUM, to list around that line in current file,.*\[\r\n\]+  FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+  FUNCTION, to list around beginning of that function,.*\[\r\n\]+  FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+Default is to describe the last source line that was listed..*\[\r\n\]+This sets the default address for \"x\" to the line's first instruction.*\[\r\n\]+so that \"x.i\" suffices to start examining the machine code..*\[\r\n\]+The address is also stored as the value of \"._\"." "help info line"
+# test help info locals
+gdb_test "help info locals" "Local variables of current stack frame."  "help info locals"
+# test help info program
+gdb_test "help info program" "Execution status of the program."  "help info program"
+# test help info registers
+gdb_test "help info registers" "List of integer registers and their contents, for selected stack frame..*\[\r\n\]+Register name as argument means describe only that register." "help info registers"
+# test help info stack "s" abbreviation
+gdb_test "help info s" "Backtrace of the stack, or innermost COUNT frames."  "help info stack \"s\" abbreviation"
+# test help info stack
+gdb_test "help info stack" "Backtrace of the stack, or innermost COUNT frames."  "help info stack"
+# test help info set
+gdb_test "help info set" "Show all GDB settings."  "help info set"
+# test help info signals
+gdb_test "help info signals" "What debugger does when program gets various signals.*"  "help info signals"
+# test help info source
+gdb_test "help info source" "Information about the current source file."  "help info source"
+# test help info sources
+gdb_test "help info sources" "Source files in the program."  "help info sources"
+# test help info symbol
+gdb_test "help info symbol" "Describe what symbol is at location ADDR.*"
+# test help info target
+gdb_test "help info target" "Names of targets and files being debugged..*\[\r\n\]+Shows the entire stack of targets currently in use .including the exec-file,.*\[\r\n\]+core-file, and process, if any., as well as the symbol file name." "help info target"
+# test help info terminal
+gdb_test "help info terminal" "Print inferior's saved terminal status."  "help info terminal"
+# test help info types
+gdb_test "help info types" "All type names, or those matching REGEXP."  "help info types"
+# test help info variables
+gdb_test "help info variables" "All global and static variable names, or those matching REGEXP."  "help info variables"
+# test help info warranty
+gdb_test "help info warranty" "Various kinds of warranty you do not have."  "help info warranty"
+# test help info watchpoints
+gdb_test "help info watchpoints" "Synonym for ``info breakpoints''."  "help info watchpoints"
+# test help inspect
+gdb_test "help inspect" "Same as \"print\" command, except that if you are running in the epoch.*\[\r\n\]+environment, the value is printed in its own window." "help inspect"
+# test help jump
+gdb_test "help jump" "Continue program being debugged at specified line or address..*\[\r\n\]+Give as argument either LINENUM or \[*\]+ADDR, where ADDR is an expression.*\[\r\n\]+for an address to start at." "help jump"
+# test help kill
+gdb_test "help kill" "Kill execution of program being debugged."  "help kill"
+# test help list "l" abbreviation
+gdb_test "help l" "List specified function or line..*\[\r\n\]+With no argument, lists ten more lines after or around previous listing..*\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing..*\[\r\n\]+One argument specifies a line, and ten lines are listed around that line..*\[\r\n\]+Two arguments with comma between specify starting and ending lines to list..*\[\r\n\]+Lines can be specified in these ways:.*\[\r\n\]+  LINENUM, to list around that line in current file,.*\[\r\n\]+  FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+  FUNCTION, to list around beginning of that function,.*\[\r\n\]+  FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+  \[*\]+ADDRESS, to list around the line containing that address..*\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg." "help list \"l\" abbreviation"
+# test help list
+gdb_test "help list" "List specified function or line..*\[\r\n\]+With no argument, lists ten more lines after or around previous listing..*\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing..*\[\r\n\]+One argument specifies a line, and ten lines are listed around that line..*\[\r\n\]+Two arguments with comma between specify starting and ending lines to list..*\[\r\n\]+Lines can be specified in these ways:.*\[\r\n\]+  LINENUM, to list around that line in current file,.*\[\r\n\]+  FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+  FUNCTION, to list around beginning of that function,.*\[\r\n\]+  FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+  \[*\]+ADDRESS, to list around the line containing that address..*\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg." "help list"
+# test help load
+gdb_test "help load" "Dynamically load FILE into the running program, and record its symbols.*\[\r\n\]+for access from GDB." "help load"
+# test help make
+gdb_test "help make" "Run the ``make'' program using the rest of the line as arguments."  "help make"
+# test help next "n" abbreviation
+gdb_test "help n" "Step program, proceeding through subroutine calls..*\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;.*\[\r\n\]+when they do, the call is treated as one instruction..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help next \"n\" abbreviation"
+# test help next
+gdb_test "help next" "Step program, proceeding through subroutine calls..*\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;.*\[\r\n\]+when they do, the call is treated as one instruction..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help next"
+# test help nexti
+gdb_test "help ni" "Step one instruction, but proceed through subroutine calls..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help nexti"
+# all the commands that used to be here are now in "maintainance" instead
+# test help obscure
+gdb_test "help obscure" "Obscure features..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help obscure"
+# test help output
+gdb_test "help output" "Like \"print\" but don't put in value history and don't print newline..*\[\r\n\]+This is useful in user-defined commands." "help output"
+# test help overlay
+gdb_test "help overlay"       "Commands for debugging overlays.*"
+gdb_test "help overlay off"   "Disable overlay debugging."
+gdb_test "help overlay manual" "Enable overlay debugging."
+gdb_test "help overlay auto"  "Enable automatic overlay debugging."
+gdb_test "help overlay list"  "List mappings of overlay sections."
+gdb_test "help overlay map"   "Assert that an overlay section is mapped."
+gdb_test "help overlay unmap" "Assert that an overlay section is unmapped."
+gdb_test "help overlay load"  "Read the overlay mapping state from the target."
+# test help print "p" abbreviation
+gdb_test "help p" "Print value of expression EXP..*\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter.*\[\r\n\]+but no count or size letter .see \"x\" command.." "help print \"p\" abbreviation"
+# test help print
+gdb_test "help print" "Print value of expression EXP..*\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter.*\[\r\n\]+but no count or size letter .see \"x\" command.." "help print"
+# test help path
+gdb_test "help path" "Add directory DIR.s. to beginning of search path for object files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+This path is equivalent to the .PATH shell variable.  It is a list of.*\[\r\n\]+directories, separated by colons.  These directories are searched to find.*\[\r\n\]+fully linked executable files and separately compiled object files as needed." "help path"
+# test help printcmds
+gdb_test "help printcmds" "Undefined command: \"printcmds\".  Try \"help\"."  "help printcmds"
+# test help printf
+gdb_test "help printf" "printf \"printf format string\", arg1, arg2, arg3, ..., argn.*\[\r\n\]+This is useful for formatted output in user-defined commands." "help printf"
+# test help ptype
+gdb_test "help ptype" "Print definition of type.*"  "help ptype"
+# test help pwd
+gdb_test "help pwd" "Print working directory.  This is used for your program as well."  "help pwd"
+# test help quit "q" abbreviation
+gdb_test "help q" "Exit gdb." "help quit \"q\" abbreviation"
+# test help quit
+gdb_test "help quit" "Exit gdb."  "help quit"
+# test help run "r" abbreviation
+gdb_test "help r" "Start debugged program.  You may specify arguments to give it..*\[\r\n\]+Args may include .*, or .*; they are expanded using \"sh\"..*\[\r\n\]+Input and output redirection with \".\", \".\", or \"..\" are also allowed..*\[\r\n\]+With no arguments, uses arguments last specified .with \"run\" or \"set args\"...*\[\r\n\]+To cancel previous arguments and run with no arguments,.*\[\r\n\]+use \"set args\" without arguments." "help run \"r\" abbreviation"
+# test help run
+gdb_test "help run" "Start debugged program.  You may specify arguments to give it..*\[\r\n\]+Args may include .*, or .*; they are expanded using \"sh\"..*\[\r\n\]+Input and output redirection with \".\", \".\", or \"..\" are also allowed..*\[\r\n\]+With no arguments, uses arguments last specified .with \"run\" or \"set args\"...*\[\r\n\]+To cancel previous arguments and run with no arguments,.*\[\r\n\]+use \"set args\" without arguments." "help run"
+# test help rbreak
+gdb_test "help rbreak" "Set a breakpoint for all functions matching REGEXP."  "help rbreak"
+# test help return
+gdb_test "help return" "Make selected stack frame return to its caller..*\[\r\n\]+Control remains in the debugger, but when you continue.*\[\r\n\]+execution will resume in the frame above the one now selected..*\[\r\n\]+If an argument is given, it is an expression for the value to return." "help return"
+# test help reverse-search
+gdb_test "help reverse-search" "Search backward for regular expression .see regex.3.. from last line listed..*"  "help reverse-search"
+# test help running
+gdb_test "help running" "Running the program..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help running"
+# test help step "s" abbreviation
+gdb_test "help s" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step \"s\" abbreviation"
+# test help step
+gdb_test "help step" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step #1"
+# test help search
+gdb_test "help search" "Search for regular expression .see regex.3.. from last line listed..*"  "help search"
+# test help section
+gdb_test "help section" "Change the base address of section SECTION of the exec file to ADDR..*\[\r\n\]+This can be used if the exec file does not contain section addresses,.*\[\r\n\]+.such as in the a.out format., or when the addresses specified in the.*\[\r\n\]+file itself are wrong.  Each section must be changed separately.  The.*\[\r\n\]+``info files'' command lists all the sections and their addresses." "help section"
+#test help set annotate
+gdb_test "help set annotate" "Set annotation_level.*\[\r\n\]+0 == normal;     1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help set annotate"
+# test help set args
+gdb_test "help set args" "Set argument list to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program."
+# test help set check "c" abbreviation
+gdb_test "help set c" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check \"c\" abbreviation"
+# test help set check "ch" abbreviation
+gdb_test "help set ch" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check \"ch\" abbreviation"
+# test help set check
+gdb_test "help set check" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check"
+# test help set check range
+gdb_test "help set check range" "Set range checking.  .on/warn/off/auto."  "help set check range"
+# test help set check type
+gdb_test "help set check type" "Set type checking.  .on/warn/off/auto."  "help set check type"
+# test help set complaints
+gdb_test "help set complaints" "Set max number of complaints about incorrect symbols."  "help set complaints"
+# test help set confirm
+gdb_test "help set confirm" "Set whether to confirm potentially dangerous operations."  "help set confirm"
+# test help set editing
+gdb_test "help set editing" "Set editing of command lines as they are typed..*\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it..*\[\r\n\]+Without an argument, command line editing is enabled.  To edit, use.*\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC." "help set editing"
+# test help set environment
+gdb_test "help set environment" "Set environment variable value to give the program..*\[\r\n\]+Arguments are VAR VALUE where VAR is variable name and VALUE is value..*\[\r\n\]+VALUES of environment variables are uninterpreted strings..*\[\r\n\]+This does not affect the program until the next \"run\" command." "help set environment"
+# test help set height
+gdb_test "help set height" "Set number of lines gdb thinks are in a page."  "help set height"
+# test help set history expansion
+gdb_test "help set history expansion" "Set history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help set history expansion"
+# test help set history filename
+gdb_test "help set history filename" "Set the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help set history filename"
+# test help set history save
+gdb_test "help set history save" "Set saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help set history save"
+# test help set history size
+gdb_test "help set history size" "Set the size of the command history, .*\[\r\n\]+ie. the number of previous commands to keep a record of." "help set history size"
+# test help set history
+gdb_test "help set history" "Generic command for setting command history parameters..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set history"
+# test help set language
+gdb_test "help set language" "Set the current source language."  "help set language"
+# test help set listsize
+gdb_test "help set listsize" "Set number of source lines gdb will list by default."  "help set listsize"
+# test help set print "p" abbreviation
+# FIXME -- Ultrix hangs randomly on this very long output from gdb and
+# continues with its output only if something is sent to gdb.
+# Also, if the system is slow, it may time out because the output is large.
+gdb_test "help set p" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"p\" abbreviatio"
+# test help set print "pr" abbreviation
+gdb_test "help set pr" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"pr\" abbreviation"
+# test help set print
+gdb_test "help set print" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print"
+# test help set print address
+gdb_test "help set print address" "Set printing of addresses."  "help set print address"
+# test help set print array
+gdb_test "help set print array" "Set prettyprinting of arrays."  "help set print array"
+# test help set print asm-demangle
+gdb_test "help set print asm-demangle" "Set demangling of C\[+\]+ names in disassembly listings."  "help set print asm-demangle"
+# test help set print demangle
+gdb_test "help set print demangle" "Set demangling of encoded C\[+\]+ names when displaying symbols."  "help set print demangle"
+# test help set print elements
+gdb_test "help set print elements" "Set limit on string chars or array elements to print..*\[\r\n\]+\"set print elements 0\" causes there to be no limit." "help set print elements"
+# test help set print object
+gdb_test "help set print object" "Set printing of object's derived type based on vtable info."  "help set print object"
+# test help set print pretty
+gdb_test "help set print pretty" "Set prettyprinting of structures."  "help set print pretty"
+# test help set print sevenbit-strings
+gdb_test "help set print sevenbit-strings" "Set printing of 8-bit characters in strings as .nnn."  "help set print sevenbit-strings"
+# test help set print union
+gdb_test "help set print union" "Set printing of unions interior to structures."  "help set print union"
+# test help set print vtbl
+gdb_test "help set print vtbl" "Set printing of C\[+\]+ virtual function tables."  "help set print vtbl"
+# test help set prompt
+gdb_test "help set prompt" "Set gdb's prompt"  "help set prompt"
+# test help set radix
+gdb_test "help set radix" "Set default input and output number radices.*\[\r\n\]+Use \'set input-radix\' or \'set output-radix\' to independently set each..*\[\r\n\]+Without an argument, sets both radices back to the default value of 10..*\[\r\n\]+" "help set radix"
+# test help set symbol-reloading
+gdb_test "help set symbol-reloading" "Set dynamic symbol table reloading multiple times in one run."  "help set symbol-reloading"
+# test help set variable
+gdb_test "help set variable" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example..  VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged.  EXP is any valid expression.*\[\r\n\]+This may usually be abbreviated to simply \"set\"." "help set variable"
+# test help set verbose
+gdb_test "help set verbose" "Set verbosity."  "help set verbose"
+#test help set width
+gdb_test "help set width" "Set number of characters gdb thinks are in a line."  "help set width"
+# test help set write
+# This is only supported on targets which use exec.o.
+gdb_test "help set write" "Set writing into executable and core files."  "help set write"
+# test help set
+# FIXME -- Ultrix hangs randomly on this very long output from gdb and
+# continues with its output only if something is sent to gdb.
+# Also, if the system is slow, it may time out because the output is large.
+#gdb_test "help set" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example..  VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged.  EXP is any valid expression.*\[\r\n\]+set listsize -- Set number of source lines gdb will list by default.*\[\r\n\]+Type \"help set\" followed by set subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous..*\[\r\n\]+" "help set"
+# test help shell
+gdb_test "help shell" "Execute the rest of the line as a shell command.  .*\[\r\n\]+With no arguments, run an inferior shell." "help shell"
+#test help show annotate
+gdb_test "help show annotate" "Show annotation_level.*\[\r\n\]+0 == normal;     1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help show annotate"
+# test help show args
+gdb_test "help show args" "Show argument list to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program."
+# test help show check "c" abbreviation
+gdb_test "help show c" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check \"c\" abbreviation"
+# test help show check
+gdb_test "help show check" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check"
+# test help show check range
+gdb_test "help show check range" "Show range checking.  .on/warn/off/auto."  "help show check range"
+# test help show check type
+gdb_test "help show check type" "Show type checking.  .on/warn/off/auto."  "help show check type"
+# test help show commands
+gdb_test "help show commands" "Show the history of commands you typed..*\[\r\n\]+You can supply a command number to start with, or a `\[+\]' to start after.*\[\r\n\]+the previous command number shown." "help show commands"
+# test help show complaints
+gdb_test "help show complaints" "Show max number of complaints about incorrect symbols."  "help show complaints"
+# test help show confirm
+gdb_test "help show confirm" "Show whether to confirm potentially dangerous operations."  "help show confirm"
+# test help show convenience
+gdb_test "help show convenience" "Debugger convenience .\".foo\". variables..*\[\r\n\]+These variables are created when you assign them values;.*\[\r\n\]+thus, \"print .foo=1\" gives \".foo\" the value 1.  Values may be any type..*\[\r\n\]+A few convenience variables are given values automatically:.*\[\r\n\]+\"._\"holds the last address examined with \"x\" or \"info lines\",.*\[\r\n\]+\".__\" holds the contents of the last address examined with \"x\"." "help show convenience"
+# test help show directories
+gdb_test "help show directories" "Current search path for finding source files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+.cdir in the path means the compilation directory of the source file." "help show directories"
+# test help show editing
+gdb_test "help show editing" "Show editing of command lines as they are typed..*\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it..*\[\r\n\]+Without an argument, command line editing is enabled.  To edit, use.*\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC." "help show editing"
+# test help show environment
+gdb_test "help show environment" "The environment to give the program, or one variable's value..*\[\r\n\]+With an argument VAR, prints the value of environment variable VAR to.*\[\r\n\]+give the program being debugged.  With no arguments, prints the entire.*\[\r\n\]+environment to be given to the program." "help show environment"
+# test help show height
+gdb_test "help show height" "Show number of lines gdb thinks are in a page."  "help show height"
+# test help show history expansion
+gdb_test "help show history expansion" "Show history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help show history expansion"
+# test help show history filename
+gdb_test "help show history filename" "Show the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help show history filename"
+# test help show history save
+gdb_test "help show history save" "Show saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help show history save"
+# test help show history size
+gdb_test "help show history size" "Show the size of the command history, .*\[\r\n\]+ie. the number of previous commands to keep a record of." "help show history size"
+# test help show history
+gdb_test "help show history" "Generic command for showing command history parameters..*\[\r\n\]+List of show history subcommands:.*\[\r\n\]+show history expansion -- Show history expansion on command input.*\[\r\n\]+show history filename -- Show the filename in which to record the command history.*\[\r\n\]+show history save -- Show saving of the history record on exit.*\[\r\n\]+show history size -- Show the size of the command history.*\[\r\n\]+Type \"help show history\" followed by show history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show history"
+# test help show language
+gdb_test "help show language" "Show the current source language."  "help show language"
+# test help show listsize
+gdb_test "help show listsize" "Show number of source lines gdb will list by default."  "help show listsize"
+# test help show print "p" abbreviation
+gdb_test "help show p" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print \"p\" abbreviation"
+# test help show print "pr" abbreviation
+gdb_test "help show pr" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print \"pr\" abbreviation"
+# test help show print
+gdb_test "help show print" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print"
+# test help show paths
+gdb_test "help show paths" "Current search path for finding object files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+This path is equivalent to the .PATH shell variable.  It is a list of.*\[\r\n\]+directories, separated by colons.  These directories are searched to find.*\[\r\n\]+fully linked executable files and separately compiled object files as needed." "help show paths"
+# test help show print address
+gdb_test "help show print address" "Show printing of addresses."  "help show print address"
+# test help show print array
+gdb_test "help show print array" "Show prettyprinting of arrays."  "help show print array"
+# test help show print asm-demangle
+gdb_test "help show print asm-demangle" "Show demangling of C\[+\]+ names in disassembly listings."  "help show print asm-demangle"
+# test help show print demangle
+gdb_test "help show print demangle" "Show demangling of encoded C\[+\]+ names when displaying symbols."  "help show print demangle"
+# test help show print elements
+gdb_test "help show print elements" "Show limit on string chars or array elements to print..*\[\r\n\]+\"set print elements 0\" causes there to be no limit." "help show print elements"
+# test help show print object
+gdb_test "help show print object" "Show printing of object's derived type based on vtable info."  "help show print object"
+# test help show print pretty
+gdb_test "help show print pretty" "Show prettyprinting of structures."  "help show print pretty"
+# test help show print sevenbit-strings
+gdb_test "help show print sevenbit-strings" "Show printing of 8-bit characters in strings as .nnn."  "help show print sevenbit-strings"
+# test help show print union
+gdb_test "help show print union" "Show printing of unions interior to structures."  "help show print union"
+# test help show print vtbl
+gdb_test "help show print vtbl" "Show printing of C\[+\]+ virtual function tables."  "help show print vtbl"
+# test help show prompt
+gdb_test "help show prompt" "Show gdb's prompt"  "help show prompt"
+# test help show radix
+gdb_test "help show radix" "Show the default input and output number radices.*\[\r\n\]+Use \'show input-radix\' or \'show output-radix\' to independently show each.*\[\r\n\]+" "help show radix"
+# test help show symbol-reloading
+gdb_test "help show symbol-reloading" "Show dynamic symbol table reloading multiple times in one run." "help show symbol-reloading"
+# test help show user
+gdb_test "help show user" "Show definitions of user defined commands..*\[\r\n\]+Argument is the name of the user defined command..*\[\r\n\]+With no argument, show definitions of all user defined commands." "help show user"
+# test help show values
+gdb_test "help show values" "Elements of value history around item number IDX .or last ten.."  "help show values"
+# test help show verbose
+gdb_test "help show verbose" "Show verbosity..*"  "help show verbose"
+# test help show version
+gdb_test "help show version" "Show what version of GDB this is."  "help show version"
+# test help show width
+gdb_test "help show width" "Show number of characters gdb thinks are in a line."  "help show width"
+# test help show write
+# This is only supported on targets which use exec.o.
+gdb_test "help show write" "Show writing into executable and core files."  "help show write"
+# test help show
+# FIXME -- Ultrix hangs randomly on this very long output from gdb and
+# continues with its output only if something is sent to gdb.
+# Also, if the system is slow, it may time out because the output is large.
+#gdb_test "help show" "Generic command for showing things about the debugger..*\[\r\n\]+List of show subcommands:.*\[\r\n\]+show listsize -- Show number of source lines gdb will list by default.*\[\r\n\]+show directories -- Current search path for finding source files.*\[\r\n\]+Type \"help show\" followed by show subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show"
+# test help step
+gdb_test "help step" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step #2"
+# test help stepi "si" abbreviation
+gdb_test "help si" "Step one instruction exactly..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help stepi \"si\" abbreviation"
+# test help stepi
+gdb_test "help stepi" "Step one instruction exactly..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help stepi"
+# test help signal
+gdb_test "help signal" "Continue program giving it signal.*"  "help signal"
+# test help source
+# vxgdb reads .vxgdbinit
+gdb_test "help source" "Read commands from a file named FILE..*\[\r\n\]+Note that the file \"\[^\"\]*\" is read automatically in this way.*\[\r\n\]+when gdb is started." "help source"
+# test help stack
+gdb_test "help stack" "Examining the stack..*\[\r\n\]+When the program being debugged stops, gdb selects the innermost frame..*\[\r\n\]+The commands below can be used to select other frames by number or address..*\[\r\n\]+List of commands:.*\[\r\n\]+backtrace -- Print backtrace of all stack frames.*\[\r\n\]+bt -- Print backtrace of all stack frames.*\[\r\n\]+down -- Select and print stack frame called by this one.*\[\r\n\]+frame -- Select and print a stack frame.*\[\r\n\]+return -- Make selected stack frame return to its caller.*\[\r\n\]+select-frame -- Select a stack frame without printing anything.*\[\r\n\]+up -- Select and print stack frame that called this one.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help stack"
+# test help status
+gdb_test "help status" "Status inquiries..*\[\r\n\]+List of commands:.*\[\r\n\]+info -- Generic command for showing things about the program being debugged.*\[\r\n\]+show -- Generic command for showing things about the debugger.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help status"
+# test help support
+# FIXME -- Ultrix hangs randomly on this very long output from gdb and
+# continues with its output only if something is sent to gdb.
+# Also, if the system is slow, it may time out because the output is large.
+#gdb_test "help support" "Support facilities..*\[\r\n\]+List of commands:.*\[\r\n\]+show confirm -- Show whether to confirm potentially dangerous operations.*\[\r\n\]+show history -- Generic command for showing command history parameters.*\[\r\n\]+down-silently -- Same as the `down' command.*\[\r\n\]+up-silently -- Same as the `up' command.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help support"
+# test help symbol-file
+gdb_test "help symbol-file" "Load symbol table from executable file FILE..*\[\r\n\]+The `file' command can also load symbol tables, as well as setting the file.*\[\r\n\]+to execute." "help symbol-file"
+# test help target child
+gdb_test "help target child" "Unix child process .started by the \"run\" command..*|Undefined target command: \"child\".  Try \"help target\"." "help target child"
+# test help target procfs
+gdb_test "help target procfs" "Unix /proc child process .started by the \"run\" command.*|Undefined target command: \"procfs\".  Try \"help target\"." "help target procfs (procfs version)"
+# test help target core
+gdb_test "help target core" ".*Use a core file as a target.*Specify the filename of the core file.*|(Undefined target command: \"core\".  Try \"help target\".)" "help target core"
+# test help target exec
+gdb_test "help target exec" "Use an executable file as a target..*\[\r\n\]+Specify the filename of the executable file." "help target exec"
+# test help target remote
+gdb_test "help target remote" "Use a remote computer via a serial line, using a gdb-specific protocol..*\[\r\n\]+Specify the serial device it is connected to .e.g. /dev/ttya..*" "help target remote"
+# test help target
+# the child process target may be "target child" or "target procfs"
+gdb_test "help target" "Connect to a target machine or process..*\[\r\n\]+The first argument is the type or protocol of the target machine..*\[\r\n\]+Remaining arguments are interpreted by the target protocol.  For more.*\[\r\n\]+information on the arguments for a particular protocol, type.*\[\r\n\]+`help target ' followed by the protocol name..*\[\r\n\]+List of target subcommands:.*\[\r\n\]+target exec -- Use an executable file as a target.*\[\r\n\]+Type \"help target\" followed by target subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help target"
+# test help tbreak
+gdb_test "help tbreak" "Set a temporary breakpoint.*"  "help tbreak"
+# test help tty
+gdb_test "help tty" "Set terminal for future runs of program being debugged."  "help tty"
+# test help until "u" abbreviation
+gdb_test "help u" "Execute until the program reaches a source line greater than the current.*\[\r\n\]+or a specified line or address or function .same args as break command...*\[\r\n\]+Execution will also stop upon exit from the current stack frame." "help until \"u\" abbreviation"
+# test help until
+gdb_test "help until" "Execute until the program reaches a source line greater than the current.*\[\r\n\]+or a specified line or address or function .same args as break command...*\[\r\n\]+Execution will also stop upon exit from the current stack frame." "help until"
+# test help undisplay
+gdb_test "help undisplay" "Cancel some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means cancel all automatic-display expressions..*\[\r\n\]+\"delete display\" has the same effect as this command..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help undisplay"
+# test help unset environment
+gdb_test "help unset environment" "Cancel environment variable VAR for the program..*\[\r\n\]+This does not affect the program until the next \"run\" command." "help unset environment"
+# test help unset
+gdb_test "help unset" "Complement to certain \"set\" commands.*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help unset"
+# test help up
+gdb_test "help up" "Select and print stack frame that called this one..*\[\r\n\]+An argument says how many frames up to go." "help up"
+# test help up-silently
+gdb_test "help up-silently" "Same as the `up' command, but does not print anything..*\[\r\n\]+This is useful in command scripts." "help up-silently"
+# test help user-defined
+gdb_test "help user-defined" "User-defined commands..*\[\r\n\]+The commands in this class are those defined by the user..*\[\r\n\]+Use the \"define\" command to define a command..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help user-defined"
+# test help watch
+gdb_test "help watch" "Set a watchpoint for an expression..*\[\r\n\]+A watchpoint stops execution of your program whenever the value of.*\[\r\n\]+an expression changes." "help watch"
+# test help whatis
+gdb_test "help whatis" "Print data type of expression EXP."  "help whatis"
+# test help where
+gdb_test "help where" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help where"
+# test help x
+gdb_test "help x" "Examine memory: x/FMT ADDRESS..*\[\r\n\]+ADDRESS is an expression for the memory address to examine..*\[\r\n\]+FMT is a repeat count followed by a format letter and a size letter..*\[\r\n\]+Defaults for format and size letters are those previously used..*\[\r\n\]+Default count is 1.  Default address is following last thing printed.*\[\r\n\]+with this command or \"print\"." "help x"
+# test help info bogus-gdb-command
+gdb_test "help info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\".  Try \"help info\"."  "help info bogus-gdb-command"
+# test help gotcha
+gdb_test "help gotcha" "Undefined command: \"gotcha\".  Try \"help\"."  "help gotcha"
diff --git a/gdb/testsuite/gdb.base/i486-elf.u b/gdb/testsuite/gdb.base/i486-elf.u
new file mode 100644
index 0000000..882338b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/i486-elf.u
@@ -0,0 +1,287 @@
+begin 777 i486-elf
+M?T5,1@$! 0            (  P !    W(($"#0   !\+@       #0 (  %
+M "@ %0 1  8    T    -( $"     "@    H     4          P   -0 
+M             !,         !          !    -    #2 ! @     * 8 
+M "@&   %     !    $   !<!@  7)8$"     "4    2 (   <     $   
+M @   ( &  " E@0(     '          !P         O=7-R+VQI8B]L:6)C
+M+G-O+C$   ,    ,    !@    L    *               !          ( 
+M   $          4    #    "     D    '                        
+M  $   "<@@0('    !(    *    I)@$"      1 /'_#P   &"6! @$    
+M$0 + !@   !<A@0(     !$ \?\?    K(($"$     2    )@   /"6! @ 
+M    $0#Q_RT   #,@@0(     !(    R    /(8$" 0    1  H /P   +R"
+M! @     $@   $D   !DE@0(     !$ \?]?    @)8$"      1 /'_ %]C
+M;&5A;G5P %]E;F0 7V5N=FER;VX 7V5T97AT &%T97AI= !?961A=&$ 97AI
+M= !?;&EB7W9E<G-I;VX 7U]F<'-T87)T %]'3$]"04Q?3T9&4T547U1!0DQ%
+M7P!?1%E.04U)0P O=7-R+VQI8B]L:6)C+G-O+C$  '"6! @' 0  =)8$" <%
+M  !XE@0(!PD  'R6! @'!P  PP   /\U:)8$"/\E;)8$"     #_)7"6! AH
+M     .G@_____R5TE@0(: @   #IT/____\E>)8$"&@0    Z<#_____)7R6
+M! AH&    .FP____:@!J (OL4KB<@@0(A<!T#6B<@@0(Z+;___^#Q 2X@)8$
+M"(7 = 7HI?___V@XA@0(Z)O___^+10B-5(40B15@E@0(4HU5#%)0Z%_____H
+MCO___^@! 0  @\0,4.B0____:@"X 0   )H     !P#TP^L&,\#K ,G#58OL
+MZ_60D)#K!C/ ZP#)PU6+[.OUD)"0ZP8SP.L R<-5B^SK]9"0D.L&,\#K ,G#
+M58OLZ_60D)#K!C/ ZP#)PU6+[.OUD)"0ZP8SP.L R<-5B^SK]9"0D.L&,\#K
+M ,G#58OLZ_60D)#K!C/ ZP#)PU6+[.OUD)"0ZP8SP.L R<-5B^SK]9"0D.L&
+M,\#K ,G#58OLZ_60D)#K!C/ ZP#)PU6+[.OUD)"0ZP8SP.L R<-5B^SK]9"0
+MD.L*W05 A@0(ZP#)PU6+[.OQD)"0ZPK=!4B&! CK ,G#58OLZ_&0D)#I\P$ 
+M )#&!?B7! @ Q@5TEP0( <8%.I<$" )FQP5LEP0( P!FQP5<EP0(! !FQP4$
+MEP0(!0#'!1"7! @&    QP7PE@0(!P   ,<%])8$" @   #'!6B7! @)    
+MQP7\E@0("@   ,<%>)<$" L   "A4(8$"*,\EP0(H5B&! BC#)<$"*%4A@0(
+MHPB7! B@^)<$"*+4EP0(H'27! BB.)<$"* ZEP0(HOB6! AFH6R7! AFHWR7
+M! AFH5R7! AFHTB7! AFH027! AFHX"7! BA$)<$"*,<EP0(H?"6! BCC)<$
+M"*'TE@0(HU"7! BA:)<$"*/PEP0(H?R6! BC0)<$"*%XEP0(HV"7! BA/)<$
+M"*/@EP0(H0R7! BC+)<$"*$(EP0(HRB7! C'!827! CXEP0(QP7LEP0(=)<$
+M",<%B)<$"#J7! C'!>B7! ALEP0(QP6<EP0(7)<$",<% )<$" 27! C'!4R7
+M! @0EP0(QP64EP0(\)8$",<%6)<$"/26! C'!7"7! AHEP0(QP7<EP0(_)8$
+M",<%&)<$"'B7! C'!=B7! @\EP0(QP6@EP0(")<$",<%))<$" (   #'!127
+M! @"    QP60F 0( 0   ,<%_)<$" $   "AF)<$"*, F 0(9J&<F 0(9J.4
+MF 0(R<-5B^SI!O[__Y    ##                                 ,A"
+M        :4           ("6! @          **"! BR@@0(PH($"-*"! @!
+M    :     P   "(@@0(#0   #B&! @$    Z( $" 4   #L@00(!@   "R!
+M! @*    >P    L    0    %0         #    9)8$" (    @    %   
+M !$    7    :(($"                                 $         
+M      0 \?\     U( $"      #  $      .B ! @      P "       L
+M@00(      ,  P      [($$"      #  0      &B"! @      P %    
+M  "(@@0(      , !@      C(($"      #  <      -R"! @      P (
+M       XA@0(      , "0      /(8$"      #  H      %R6! @     
+M P +      !DE@0(      , #       @)8$"      #  T      /"6! @ 
+M     P .                  , #P                 # !          
+M         P 1                  , $@                 # !,     
+M             P 4  H               0 \?\1               $ /'_
+M&               ! #Q_R0               0 \?\L               $
+M /'_-@              ! #Q_ST   !,@P0(#0   !( " !)    \)8$" 0 
+M   1  X 5@   /26! @$    $0 . &4    XA@0(     !( "0!K    ^)8$
+M" (    1  X @0   #2$! @! @  $@ ( (8   #\E@0(!    !$ #@"4    
+M )<$" 0    1  X K0   )R"! @<    $@   +8   "DF 0(     !$ \?^[
+M    !)<$" (    1  X S    )R#! @-    $@ ( .(    (EP0("    !$ 
+M#@#K    $)<$" 0    1  X \0   -R"! @     $@ ( /@    4EP0(!   
+M !$ #@ # 0  8)8$" 0    1  L # $  !B7! @$    $0 . "0!   <EP0(
+M"    !$ #@ P 0  ))<$" 0    1  X . $  %R#! @-    $@ ( $L!   H
+MEP0($    !$ #@!: 0  7(8$"      1 /'_80$  #B7! @"    $0 . '4!
+M   ZEP0( 0   !$ #@"% 0  /)<$" 0    1  X C0$  $"7! @(    $0 .
+M *$!  "L@@0(0    !(   "H 0  8)8$" 0    A  L L $  -R#! @-    
+M$@ ( +P!  #\@P0(#0   !( " #1 0  2)<$" 0    1  X Y@$  $R7! @$
+M    $0 . /0!  #PE@0(     !$ \?_[ 0  ?(,$" T    2  @ " (  %"7
+M! @(    $0 . !T"  !8EP0(!    !$ #@ T @  K(,$" T    2  @ /P( 
+M %R7! @"    $0 . $X"   ,A 0($0   !( " !; @  S(($"      2    
+M8 (  &"7! @(    $0 . '8"  !HEP0(!    !$ #@!] @  ;)<$" (    1
+M  X A0(  '"7! @$    $0 . )0"  !TEP0( 0   !$ #@"B @  >)<$" 0 
+M   1  X L@(  'R7! @$    $0 . , "  " EP0(!    !$ #@#7 @  /(8$
+M" 0    1  H Y (  $N#! @     $@ ( .P"  "$EP0(!    !$ #@#[ @  
+MB)<$" 0    1  X $P,  (R7! @(    $0 . "8#  "\@@0(     !(    P
+M P  E)<$" 0    1  X 10,  )B7! @$    $0 . $P#  !DE@0(     !$ 
+M\?]B P  G)<$" 0    1  X >0,  *"7! @$    $0 . (H#  !<E@0(!   
+M !$ "P"< P  I)<$"!@    1  X I@,  +R7! @8    $0 . + #  #4EP0(
+M @   !$ #@"] P  V)<$" 0    1  X S0,  -R7! @$    $0 . .,#   @
+MA 0($0   !( " #Q P  O(,$" T    2  @  P0  ("6! @     $0#Q_PP$
+M  #@EP0("    !$ #@ :!   Z)<$" 0    1  X *@0  .R#! @-    $@ (
+M #T$  #LEP0(!    !$ #@!3!   \)<$" @    1  X 8 0  (B"! @     
+M$@ & &8$  #XEP0( 0   !$ #@!M!   _)<$" 0    1  X =00  &R#! @-
+M    $@ ( (H$    F 0(D    !$ #@"1!   C(,$" T    2  @ I00  )"8
+M! @$    $0 . *\$  "4F 0("    !$ #@"X!   S(,$" T    2  @ S 0 
+M )R8! @(    $0 .  !I-#@V+F5L9@!C<G0Q+G, 8W)T:2YS '9A;'5E<RU8
+M="YC &=D8FUE+F, <VA?9&%T82YC &-R=&XN<P!V7V-H87)?9G5N8P!V7W-I
+M9VYE9%]I;G0 =E]U;G-I9VYE9%]I;G0 7V9I;FD =E]U;G-I9VYE9%]C:&%R
+M7V%R<F%Y &UA:6X =E]S:6=N961?;&]N9P!V7W5N<VEG;F5D7W-H;W)T7W!O
+M:6YT97( 7V-L96%N=7  7V5N9 !V7W5N<VEG;F5D7W-H;W)T '9?=6YS:6=N
+M961?<VAO<G1?9G5N8P!V7V1O=6)L90!V7VEN= !?<W1A<G0 ;F]N<')I;6%R
+M>0!?96YV:7)O;@!V7W5N<VEG;F5D7VQO;F=?<&]I;G1E<@!V7VEN=%]A<G)A
+M>0!P<FEM87)Y '9?<VEG;F5D7V-H87)?9G5N8P!V7V1O=6)L95]A<G)A>0!?
+M971E>'0 =E]S:6=N961?8VAA<E]A<G)A>0!V7W5N<VEG;F5D7V-H87( =E]F
+M;&]A= !V7W-I9VYE9%]L;VYG7V%R<F%Y &%T97AI= !E;G9I<F]N '9?;&]N
+M9U]F=6YC '9?=6YS:6=N961?;&]N9U]F=6YC '9?<VEG;F5D7W-H;W)T7V%R
+M<F%Y '9?:6YT7W!O:6YT97( 7V5D871A '9?<VAO<G1?9G5N8P!V7W5N<VEG
+M;F5D7VEN=%]A<G)A>0!V7W5N<VEG;F5D7VEN=%]P;VEN=&5R '9?:6YT7V9U
+M;F, =E]S:6=N961?<VAO<G0 =E]F;&]A=%]F=6YC &5X:70 =E]U;G-I9VYE
+M9%]L;VYG7V%R<F%Y '9?;&]N9P!V7W-H;W)T '9?;&]N9U]P;VEN=&5R '9?
+M<VEG;F5D7V-H87( =E]U;G-I9VYE9%]L;VYG '9?<VAO<G1?87)R87D =E]U
+M;G-I9VYE9%]S:&]R=%]A<G)A>0!?;&EB7W9E<G-I;VX 7VUC;W5N= !V7V-H
+M87)?<&]I;G1E<@!V7W5N<VEG;F5D7V-H87)?<&]I;G1E<@!V7W-I9VYE9%]I
+M;G1?87)R87D 7U]F<'-T87)T '9?<VEG;F5D7VEN=%]P;VEN=&5R '-?;&EN
+M:P!?1TQ/0D%,7T]&1E-%5%]404),15\ =E]S:6=N961?<VAO<G1?<&]I;G1E
+M<@!V7V1O=6)L95]P;VEN=&5R %]?;&]N9V1O=6)L95]U<V5D '9?<W1R=6-T
+M,0!V7W-T<G5C=#( =E]C:&%R7V%R<F%Y '9?9FQO871?<&]I;G1E<@!V7W-I
+M9VYE9%]L;VYG7W!O:6YT97( =E]D;W5B;&5?9G5N8P!V7W-I9VYE9%]I;G1?
+M9G5N8P!?1%E.04U)0P!V7V9L;V%T7V%R<F%Y '9?<VAO<G1?<&]I;G1E<@!V
+M7W-I9VYE9%]L;VYG7V9U;F, =E]S:6=N961?8VAA<E]P;VEN=&5R '9?;&]N
+M9U]A<G)A>0!?:6YI= !V7V-H87( 8VQU;FME<@!V7W5N<VEG;F5D7V-H87)?
+M9G5N8P!U7VQI;FL =E]S:6=N961?<VAO<G1?9G5N8P!S<&]R='-C87( =E]U
+M;FEO;C( =E]U;G-I9VYE9%]I;G1?9G5N8P!V7W5N:6]N   N:6YT97)P "YH
+M87-H "YD>6YS>6T +F1Y;G-T<@ N<F5L+G!L=  N:6YI=  N<&QT "YT97AT
+M "YF:6YI "YR;V1A=&$ +F1A=&$ +F=O=  N9'EN86UI8P N8G-S "YS>6UT
+M86( +G-T<G1A8@ N<VAS=')T86( +F-O;6UE;G0 +F1E8G5G "YL:6YE $ H
+M(REL:6)C+6DS.#8Z;&EB8RUI,S@V+V-S=2]C<G0Q+G,),2XQ. !A<SH@*%-#
+M1$4I(#4N," @,#0O,3DO.3  0"@C*6QI8F,M:3,X-CIC<W4O8W)T:2YS"3$N
+M,@!A<SH@*%-#1$4I(#4N," @,#0O,3DO.3  0"@C*6QI8F,M<&]R=#IG96XO
+M=F%L=65S+5AT+F,),2XS $ H(REL:6)C.FEN8R]S>6YO;GEM<RYH"3$N,S, 
+M0"@C*6AE860Z;6%T:"YH"3(N,3$N,2XR-P!A8V]M<#H@*%-#1$4I(#4N," @
+M,#0O,3DO.3  ;W!T:6TZ("A30T1%*2 U+C @(# T+S$Y+SDP &%S.B H4T-$
+M12D@-2XP(" P-"\Q.2\Y, !A8V]M<#H@*%-#1$4I(#4N," @,#0O,3DO.3  
+M87,Z("A30T1%*2 U+C @(# T+S$Y+SDP $ H(REL:6)C+6DS.#8Z9V5N+W-H
+M7V1A=&$N8PDQ+C, 86-O;7 Z("A30T1%*2 U+C @(# T+S$Y+SDP &]P=&EM
+M.B H4T-$12D@-2XP(" P-"\Q.2\Y, !A<SH@*%-#1$4I(#4N," @,#0O,3DO
+M.3  0"@C*6QI8F,M:3,X-CIL:6)C+6DS.#8O8W-U+V-R=&XN<PDQ+C4 87,Z
+M("A30T1%*2 U+C @(# T+S$Y+SDP "!L9" Z("A30T1%*2 U+C @(# T+S$Y
+M+SDP    +@   !$ $@!P%@  . !G9&)M92YC #8! 0   !$!3(,$""$!-88$
+M" 8!     !T    3 !( 3@$  #@ =%]S=')U8W0 M@ 8    *@    T $@!U
+M    . !V7V-H87)?;65M8F5R %4  0 C  8 !      '*P    T $@"@    
+M. !V7W-H;W)T7VUE;6)E<@!5  0 (P &  0"    !RD    - !( R0   #@ 
+M=E]I;G1?;65M8F5R %4 !P C  8 ! 0    '*@    T $@#S    . !V7VQO
+M;F=?;65M8F5R %4 "@ C  8 ! @    '*P    T $@ > 0  . !V7V9L;V%T
+M7VUE;6)E<@!5  X (P &  0,    !RP    - !( 2@$  #@ =E]D;W5B;&5?
+M;65M8F5R %4 #P C  8 !!     '!    !L    3 !( ; (  #@ +C!F86ME
+M +8 &    "H    - !( DP$  #@ =E]C:&%R7VUE;6)E<@!5  $ (P &  0 
+M    !RL    - !( O@$  #@ =E]S:&]R=%]M96UB97( 50 $ ", !@ $ @  
+M  <I    #0 2 .<!   X '9?:6YT7VUE;6)E<@!5  < (P &  0$    !RH 
+M   - !( $0(  #@ =E]L;VYG7VUE;6)E<@!5  H (P &  0(    !RL    -
+M !( / (  #@ =E]F;&]A=%]M96UB97( 50 . ", !@ $#     <L    #0 2
+M &@"   X '9?9&]U8FQE7VUE;6)E<@!5  \ (P &  00    !P0    <    
+M%P 2 (L#   X '1?=6YI;VX M@ (    *@    T $@"R @  . !V7V-H87)?
+M;65M8F5R %4  0 C  8 !      '*P    T $@#= @  . !V7W-H;W)T7VUE
+M;6)E<@!5  0 (P &  0     !RD    - !( !@,  #@ =E]I;G1?;65M8F5R
+M %4 !P C  8 !      '*@    T $@ P P  . !V7VQO;F=?;65M8F5R %4 
+M"@ C  8 !      '*P    T $@!; P  . !V7V9L;V%T7VUE;6)E<@!5  X 
+M(P &  0     !RP    - !( AP,  #@ =E]D;W5B;&5?;65M8F5R %4 #P C
+M  8 !      '!    !L    7 !( J00  #@ +C%F86ME +8 "    "H    -
+M !( T ,  #@ =E]C:&%R7VUE;6)E<@!5  $ (P &  0     !RL    - !( 
+M^P,  #@ =E]S:&]R=%]M96UB97( 50 $ ", !@ $      <I    #0 2 "0$
+M   X '9?:6YT7VUE;6)E<@!5  < (P &  0     !RH    - !( 3@0  #@ 
+M=E]L;VYG7VUE;6)E<@!5  H (P &  0     !RL    - !( >00  #@ =E]F
+M;&]A=%]M96UB97( 50 . ", !@ $      <L    #0 2 *4$   X '9?9&]U
+M8FQE7VUE;6)E<@!5  \ (P &  0     !P0    J    !@ 2 -<$   X '9?
+M8VAA<E]F=6YC %4  0 1 4R#! @A 5F#! @$    ,0    8 $@ ,!0  . !V
+M7W-I9VYE9%]C:&%R7V9U;F, 50 " !$!7(,$""$!:8,$" 0    S    !@ 2
+M $,%   X '9?=6YS:6=N961?8VAA<E]F=6YC %4  P 1 6R#! @A 7F#! @$
+M    *P    8 $@!R!0  . !V7W-H;W)T7V9U;F, 50 $ !$!?(,$""$!B8,$
+M" 0    R    !@ 2 *@%   X '9?<VEG;F5D7W-H;W)T7V9U;F, 50 % !$!
+MC(,$""$!F8,$" 0    T    !@ 2 . %   X '9?=6YS:6=N961?<VAO<G1?
+M9G5N8P!5  8 $0&<@P0((0&I@P0(!    "D    & !( #08  #@ =E]I;G1?
+M9G5N8P!5  < $0&L@P0((0&Y@P0(!    #     & !( 008  #@ =E]S:6=N
+M961?:6YT7V9U;F, 50 ( !$!O(,$""$!R8,$" 0    R    !@ 2 '<&   X
+M '9?=6YS:6=N961?:6YT7V9U;F, 50 ) !$!S(,$""$!V8,$" 0    J    
+M!@ 2 *4&   X '9?;&]N9U]F=6YC %4 "@ 1 =R#! @A >F#! @$    ,0  
+M  8 $@#:!@  . !V7W-I9VYE9%]L;VYG7V9U;F, 50 + !$![(,$""$!^8,$
+M" 0    S    !@ 2 !$'   X '9?=6YS:6=N961?;&]N9U]F=6YC %4 #  1
+M ?R#! @A 0F$! @$    *P    8 $@! !P  . !V7V9L;V%T7V9U;F, 50 .
+M !$!#(0$""$!'80$" 0    L    !@ 2 ' '   X '9?9&]U8FQE7V9U;F, 
+M50 / !$!((0$""$!,80$" 0    5    %0 2 *X'  "#  4  >H'   5    
+M!0 2 )H'  "#  4  >H'   0    !0 2 *H'  !5  < !    #P    ! !( 
+MZ@<  )4   "C "@   @             "        0     (       "    
+M"'( +@   !D    3 !( >P@  #@ ;&EN:P"V )@    F    #0 2 "D(   X
+M &YE>'0 @P %  'J!P  (P &  0     !RH    - !( 4P@  #@ ;&EN:V9U
+M;F, @P %  %P!P  (P &  0$    !R0    - !( =P@  #@ <W1U9F8 <@"N
+M!P  (P &  0(    !P0    5    %0 2 +D(  "#  4  >H'   5    !0 2
+M *4(  "#  4  >H'   0    !0 2 +4(  !5  < !    #P    ! !( ]0@ 
+M )4   "C "@   @             "        0     (       "    "'( 
+M+@   !P    7 !( B0D  #@ ='5?;&EN:P"V )     F    #0 2 #<)   X
+M &YE>'0 @P %  'J!P  (P &  0     !RH    - !( 80D  #@ ;&EN:V9U
+M;F, @P %  %["   (P &  0     !R0    - !( A0D  #@ <W1U9F8 <@"Y
+M"   (P &  0     !P0    Z    !  2 ,<)   X "XR9F%K90"V  0   #S
+M !L  @   &)L=64  0   &=R965N      !R960 !    #X    $ !( "0H 
+M #@ 8V]L;W)S +8 !    /, 'P "    <&EN:P !    <'5R<&QE      !Y
+M96QL;W< !    #(    $ !( /PH  #@ +C-F86ME +8 !    /, $P !    
+M9F]R9       8VAE=GD !    #$    $ !( = H  #@ 8V%R<P"V  0   #S
+M !0  0   '!O<G-C:&4      &)M=P $    ,@    0 $@"J"@  .  N-&9A
+M:V4 M@ $    \P 3  $   !44E5%      !&04Q310 $    '    !8 $@#&
+M"@  . !B;V]L96%N '( = H  #$    $ !( ^PH  #@ 8G9A;', M@ $    
+M\P 3  $   !T<G5E      !F86QS90 $    '0   !8 $@ 8"P  . !B;V]L
+M96%N,@!R ,8*  !&    !  2 &(+   X &UI<V]R9&5R960 M@ $    \P C
+M  ,   !T:')E90      >F5R;P !    ;VYE  (   !T=V\ !    ",    &
+M !( B0L  #@ ;6%I;@!5  < $0$TA 0((0$UA@0(!    "<    ' !( L L 
+M #@ <W!O<G1S8V%R '( /PH  ", !0 #D)@$""4    ' !( U0L  #@ 8VQU
+M;FME<@!R  D*   C  4  _R7! @H    !P 2 /T+   X &YO;G!R:6UA<GD 
+M<@#'"0  (P %  ,4EP0()0    < $@ B#   . !P<FEM87)Y '( B0D  ", 
+M!0 #))<$""0    ' !( 1@P  #@ =5]L:6YK '( ]0@  ", !0 # )@$""< 
+M   ' !( ;0P  #@ <U]L:6YK (, !0 !Z@<  ", !0 #F)<$""8    ' !( 
+MDPP  #@ =E]U;FEO;C( <@"+ P  (P %  .4F 0()0    < $@"X#   . !V
+M7W5N:6]N '( ; (  ", !0 #G)@$""<    ' !( WPP  #@ =E]S=')U8W0R
+M '( 3@$  ", !0 #O)<$""<    ' !( !@T  #@ =E]S=')U8W0Q '( +@  
+M ", !0 #I)<$""\    ' !( -0T  #@ =E]D;W5B;&5?<&]I;G1E<@!C  , 
+M 0\ (P %  .@EP0(+@    < $@!C#0  . !V7V9L;V%T7W!O:6YT97( 8P #
+M  $. ", !0 #V)<$"#8    ' !( F0T  #@ =E]U;G-I9VYE9%]L;VYG7W!O
+M:6YT97( 8P #  $, ", !0 #&)<$"#0    ' !( S0T  #@ =E]S:6=N961?
+M;&]N9U]P;VEN=&5R &,  P !"P C  4  ]R7! @M    !P 2 /H-   X '9?
+M;&]N9U]P;VEN=&5R &,  P !"@ C  4  W"7! @U    !P 2 "\.   X '9?
+M=6YS:6=N961?:6YT7W!O:6YT97( 8P #  $) ", !0 #6)<$"#,    ' !( 
+M8@X  #@ =E]S:6=N961?:6YT7W!O:6YT97( 8P #  $( ", !0 #E)<$""P 
+M   ' !( C@X  #@ =E]I;G1?<&]I;G1E<@!C  ,  0< (P %  -,EP0(-P  
+M  < $@#%#@  . !V7W5N<VEG;F5D7W-H;W)T7W!O:6YT97( 8P #  $& ", 
+M!0 # )<$"#4    ' !( ^@X  #@ =E]S:6=N961?<VAO<G1?<&]I;G1E<@!C
+M  ,  04 (P %  .<EP0(+@    < $@ H#P  . !V7W-H;W)T7W!O:6YT97( 
+M8P #  $$ ", !0 #Z)<$"#8    ' !( 7@\  #@ =E]U;G-I9VYE9%]C:&%R
+M7W!O:6YT97( 8P #  $# ", !0 #B)<$"#0    ' !( D@\  #@ =E]S:6=N
+M961?8VAA<E]P;VEN=&5R &,  P ! @ C  4  ^R7! @M    !P 2 +\/   X
+M '9?8VAA<E]P;VEN=&5R &,  P ! 0 C  4  X27! @D     0 2 .,/  "5
+M    HP 0   (       !    "%4 #P L    !P 2  \0   X '9?9&]U8FQE
+M7V%R<F%Y '( OP\  ", !0 #*)<$""0    ! !( ,Q   )4   "C !    @ 
+M      $    (50 . "L    ' !( 7A   #@ =E]F;&]A=%]A<G)A>0!R  \0
+M   C  4  ^"7! @D     0 2 ((0  "5    HP 0   (       !    "%4 
+M#  S    !P 2 +40   X '9?=6YS:6=N961?;&]N9U]A<G)A>0!R %X0   C
+M  4  V"7! @D     0 2 -D0  "5    HP 0   (       !    "%4 "P Q
+M    !P 2  H1   X '9?<VEG;F5D7VQO;F=?87)R87D <@"U$   (P %  - 
+MEP0()     $ $@ N$0  E0   *, $   "        0    A5  H *@    < 
+M$@!8$0  . !V7VQO;F=?87)R87D <@ *$0  (P %  /PEP0()     $ $@!\
+M$0  E0   *, $   "        0    A5  D ,@    < $@"N$0  . !V7W5N
+M<VEG;F5D7VEN=%]A<G)A>0!R %@1   C  4  U"7! @D     0 2 -(1  "5
+M    HP 0   (       !    "%4 "  P    !P 2  (2   X '9?<VEG;F5D
+M7VEN=%]A<G)A>0!R *X1   C  4  XR7! @D     0 2 "82  "5    HP 0
+M   (       !    "%4 !P I    !P 2 $\2   X '9?:6YT7V%R<F%Y '( 
+M A(  ", !0 #')<$""0    ! !( <Q(  )4   "C !    @       $    (
+M50 & #0    ' !( IQ(  #@ =E]U;G-I9VYE9%]S:&]R=%]A<G)A>0!R $\2
+M   C  4  X"7! @D     0 2 ,L2  "5    HP 0   (       !    "%4 
+M!0 R    !P 2 /T2   X '9?<VEG;F5D7W-H;W)T7V%R<F%Y '( IQ(  ", 
+M!0 #2)<$""0    ! !( (1,  )4   "C !    @       $    (50 $ "L 
+M   ' !( 3!,  #@ =E]S:&]R=%]A<G)A>0!R /T2   C  4  WR7! @D    
+M 0 2 ' 3  "5    HP 0   (       !    "%4  P S    !P 2 *,3   X
+M '9?=6YS:6=N961?8VAA<E]A<G)A>0!R $P3   C  4  _B6! @D     0 2
+M ,<3  "5    HP 0   (       !    "%4  @ Q    !P 2 /@3   X '9?
+M<VEG;F5D7V-H87)?87)R87D <@"C$P  (P %  ,XEP0()     $ $@ <%   
+ME0   *, $   "        0    A5  $ *@    < $@!&%   . !V7V-H87)?
+M87)R87D <@#X$P  (P %  /4EP0()     < $@!J%   . !V7V1O=6)L90!5
+M  \ (P %  ,(EP0((P    < $@"-%   . !V7V9L;V%T %4 #@ C  4  SR7
+M! @K    !P 2 +@4   X '9?=6YS:6=N961?;&]N9P!5  P (P %  -XEP0(
+M*0    < $@#A%   . !V7W-I9VYE9%]L;VYG %4 "P C  4  _R6! @B    
+M!P 2  ,5   X '9?;&]N9P!5  H (P %  -HEP0(*@    < $@ M%0  . !V
+M7W5N<VEG;F5D7VEN= !5  D (P %  /TE@0(*     < $@!5%0  . !V7W-I
+M9VYE9%]I;G0 50 ( ", !0 #\)8$""$    ' !( =A4  #@ =E]I;G0 50 '
+M ", !0 #$)<$""P    ' !( HA4  #@ =E]U;G-I9VYE9%]S:&]R= !5  8 
+M(P %  ,$EP0(*@    < $@#,%0  . !V7W-I9VYE9%]S:&]R= !5  4 (P %
+M  -<EP0((P    < $@#O%0  . !V7W-H;W)T %4 !  C  4  VR7! @K    
+M!P 2 !H6   X '9?=6YS:6=N961?8VAA<@!5  , (P %  ,ZEP0(*0    < 
+M$@!#%@  . !V7W-I9VYE9%]C:&%R %4  @ C  4  W27! @B    !P 2 &46
+M   X '9?8VAA<@!5  $ (P %  /XEP0(!     <       "2 @  3(,$"'D 
+M  #__P    !Z    __\0    >P   /__(    'T   #__S    !^    __] 
+M    ?P   /__4    ($   #__V    ""    __]P    @P   /__@    (4 
+M  #__Y    "&    __^@    AP   /__L    (D   #__\    "*    ___4
+M    L@   /__Z    +4   #__^X   "V    ___U    MP   /___    +D 
+M  #__P,!  "Z    __\, 0  NP   /__%0$  +T   #__QX!  "^    __\H
+M 0  OP   /__,@$  ,$   #__SP!  #"    __]& 0  PP   /__4 $  ,4 
+M  #__UH!  #&    __]D 0  R0   /__> $  ,H   #__X(!  #+    __^,
+M 0  S0   /__E@$  ,X   #__Z(!  #/    __^N 0  T0   /__N@$  -( 
+M  #__\0!  #3    ___. 0  U0   /__V $  -8   #__^(!  #7    ___L
+M 0  V0   /__]@$  -H   #__P "  #<    __\4 @  W0   /__'@(  -X 
+M  #__R@"  #@    __\R @  X0   /__/ (  .(   #__T8"  #D    __]0
+M @  Y0   /__6@(  .8   #__V0"  #H    __]N @  Z0   /__> (  .H 
+M  #__X("  #L    __^, @  [0   /__E@(  .\   #__Z "  #P    __^J
+M @  \0   /__M (  /(   #__[X"  #T    ___( @  ]@   /__T@(  /< 
+M  #__]X"        ___I @                                      
+M                     0    $    "    U( $"-0    3            
+M   !          D    %     @   .B ! CH    1     ,         !   
+M  0    /    "P    (    L@00(+ $  ,     $     0    0    0    
+M%P    ,    "    [($$".P!  ![               !         !\    )
+M     @   &B"! AH @  (     ,    '    !     @    H     0    8 
+M  "(@@0(B (   $               0         +@    $    &    C(($
+M"(P"  !0               $    !    #,    !    !@   -R"! C< @  
+M60,             !          Y     0    8    XA@0(. 8   $     
+M          0         /P    $    "    /(8$"#P&   @            
+M   $         $<    !     P   %R6! A<!@  "               !   
+M      !-     0    ,   !DE@0(9 8  !P               0    $    
+M4@    8    #    @)8$"( &  !P    !          $    "    %L    (
+M     P   /"6! CP!@  M $             !         !@     @      
+M        \ 8    '   0    '     0    0    :     ,             
+M / -  #4!              !         '     #              #$$@  
+MD                0        !Z     0              5!,  "("    
+M          $         @P    $              '@5  !P%@          
+M   $         (H    !              #H*P  D@(              0  
+%        
+ 
+end
diff --git a/gdb/testsuite/gdb.base/i860-elf.u b/gdb/testsuite/gdb.base/i860-elf.u
new file mode 100644
index 0000000..216e83b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/i860-elf.u
@@ -0,0 +1,314 @@
+begin 775 i860-elf
+M?T5,1@$" 0             "  <    !   32    #0  #-4       T "  
+M!0 H !4 $0    8    T   0-         "@    H     4          P  
+M -0              !,         !          !    -   $#0        (
+M\   "/     %   0      $   DD   I)         "8   "7     8  !  
+M     @  "4P  "E,         '          !P     O=7-R+VQI8B]L:6)C
+M+G-O+C$       ,    ,    !P    P    +                     @  
+M       #    !0         &    !     D    *    "               
+M                           !     0  $M    !,$@        H  "N 
+M     !$ __$    /   I*     01   +    &   &20     $0#_\0   !\ 
+M !+L    F!(        F   IO      1 /_Q    +0  $R0     $@      
+M #(  !D0    !!$   H    _   3"      2        20  *3      $0#_
+M\0   %\  "E,     !$ __$ 7V-L96%N=7  7V5N9 !?96YV:7)O;@!?971E
+M>'0 871E>&ET %]E9&%T80!E>&ET %]L:6)?=F5R<VEO;@!?7V9P<W1A<G0 
+M7T=,3T)!3%]/1D93151?5$%"3$5? %]$64Y!34E# "]U<W(O;&EB+VQI8F,N
+M<V\N,0     I/    @0        I0   !@0        I1   "@0        I
+M2   " 0          *    !   @ H    *     7_RDY[!\  !?>*35  /@ 
+M%_\I/>P?  #D'0  0 #X &O___;OO0  [!\  .P>  !  /@ %_\I0>^]  #D
+M'0 ,[!X  &O__^\7_RE%[!\  .0= !A  /@ :___Z.^]  #L'P  [!X  $  
+M^  7_RE)[[T  .0= "3L'@  :___X:    #(   4'$   81"__"@0P  '$  
+M!>P0  #40@ /6@   N80$M"@    ;___X.??*4SL'@  ;___VUO@  +L$   
+MH)   .80&0!O___8H    &___\>@    ;___VZ82  (4<  1AE( &()2&  ?
+MY9$I[!\  &P  )J$<0 4;___UZ    "@$   H    $?@^ "$'P !H\$  * _
+M  "@    0 #X *    "@    H    ,@   P<0!@!A$+_\* 0  "$0P  %&, 
+M 81_ !"GX@  0  ( *    #(   ,'$ 8 81"__"@$   A$,  !1C  &$?P 0
+MI^(  $  " "@    R   #!Q & &$0O_PH!   (1#   48P !A'\ $*?B  ! 
+M  @ H    ,@   P<0!@!A$+_\* 0  "$0P  %&,  81_ !"GX@  0  ( *  
+M  #(   ,'$ 8 81"__"@$   A$,  !1C  &$?P 0I^(  $  " "@    R   
+M#!Q & &$0O_PH!   (1#   48P !A'\ $*?B  !   @ H    ,@   P<0!@!
+MA$+_\* 0  "$0P  %&,  81_ !"GX@  0  ( *    #(   ,'$ 8 81"__"@
+M$   A$,  !1C  &$?P 0I^(  $  " "@    R   #!Q & &$0O_PH!   (1#
+M   48P !A'\ $*?B  !   @ H    ,@   P<0!@!A$+_\* 0  "$0P  %&, 
+M 81_ !"GX@  0  ( *    #(   ,'$ 8 81"__"@$   A$,  !1C  &$?P 0
+MI^(  $  " "@    R   #!Q & &$0O_PH!   (1#   48P !A'\ $*?B  ! 
+M  @ H    ,@   P<0!@!A$+_\$@( <F$0P  %&,  81_ !"GX@  0  ( *  
+M  #(   ,'$ 8 81"__!(" ')A$,  !1C  &$?P 0I^(  $  " "@    R   
+M#!Q & &$0O_P[!\  (1#  "4'  !#^4"S _EXD3L'P  [!\  )0<  *4'  #
+M#^7B"A_EXCSL'P  [!\  )0<  24'  %'^7B+!_EX=3L'P  [!\  )0<  :4
+M'  ''^7AX1_EX<7L'P  [!\  )0<  B4'  )'^7AP1_EXCGL'P  [!\  )0<
+M  J4'  +'^7AS1_EXDGL'P  )_ 9(NP?   O\"H.[!\  "?P&1CL'P  +_ I
+MV.P?   '_"K,[!\   _EXJCL'P  !_PJ1.P?   /Y>(([!\   ?\*@KL'P  
+M#^7AR.P?   7_"H\[!\  !_EXDSL'P  %_PJ+.P?   ?Y>(8[!\  !?\*=3L
+M'P  '^7B4.P?   7_"GA[!\  !_EX>WL'P  %_PIQ>P?   ?Y>)=[!\  !?\
+M*<'L'P  '^7B(>P?   7_"HY[!\  !_EXL7L'P  %_PIS>P?   ?Y>(1[!\ 
+M !?\*DGL'P  '^7B,>P?   G\"H.[!\  "_P*K;L'P  )_ IV.P?   O\"GX
+M[!\  .?\*LSL'P  '^7B5>P?  #G_"I$[!\  !_EXL'L'P  Y_PJ"NP?   ?
+MY>)9[!\  .?\*CSL'P  '^7BO>P?  #G_"HL[!\  !_EXFWL'P  Y_PIU.P?
+M   ?Y>'1[!\  .?\*>#L'P  '^7B'>P?  #G_"G$[!\  !_EXF7L'P  Y_PI
+MP.P?   ?Y>(I[!\  .?\*CCL'P  '^7B0>P?  #G_"G,[!\  !_EXK'L'P  
+MY_PJ2.P?   ?Y>'I[!\  .?\*@SL'P  '^7BK>P?  #G_"G8[!\  !_EXG'L
+M'P  [!\  )0<  *4'  "'^7A]1_EX>7L'P  [!\  )0<  &4'  !'^7C:1_E
+MXM'L'P  %_PJ:>P?   ?Y>+9[!\  !?\*WCL'P  '^7C<.P?   48P !A'\ 
+M$*?B  !   @ H    $  " "@    H               0&D       !"R   
+M                   I3              2W   $O@  !,4   3,     $ 
+M  !H    #   $K     -   9      0  !#H    !0  $@     &   1,   
+M  H   ![    "P   !     5          ,  "DP     @   #     4    
+M!P   !<  !)\                                          $     
+M      0 __$        0U      #   !        $.@      P   @      
+M !$P      ,   ,        2       #   $        $GP      P  !0  
+M     !*P      ,   8        2P      #   '        $T       P  
+M"        !D       ,   D        9$      #   *        *20     
+M P  "P       "DP      ,   P        I3      #   -        *<  
+M     P  #@                ,   \                #   0        
+M         P  $0                ,  !(                #   3    
+M             P  %     <           0 __$    .           $ /_Q
+M    %0          ! #_\0   "$           0 __$    I           $
+M /_Q    ,P          ! #_\0   #H  "G     !!$   X   !)   IQ   
+M  01   .    5@  $_@    @$@  "    &(  !D      !(   D   !H   I
+MR     (1   .    ?@  %B@   +8$@  "    (,  "G,    !!$   X   "1
+M   IT     01   .    J@  $X    !,$@       +,  "N      !$ __$ 
+M  "X   IU     (1   .    R0  %,     @$@  "    -\  "G8    "!$ 
+M  X   #H   IX     01   .    [@  $T@     $@  "    /4  "GD    
+M!!$   X   $    I*     01   +   !"0  *>@    $$0  #@   2$  "GL
+M    "!$   X   $M   I]     01   .   !-0  %"     @$@  "    4@ 
+M "GX    $!$   X   %7   9)      1 /_Q   !7@  *@@    "$0  #@  
+M 7(  "H*     1$   X   &"   J#     01   .   !B@  *A     ($0  
+M#@   9X  !30    F!(       &E   I*     0A   +   !K0  %6     @
+M$@  "    ;D  "H8    !!$   X   '.   5L    " 2   (   !XP  *AP 
+M   $$0  #@   ?$  "F\     !$ __$   'X   4<    " 2   (   "!0  
+M*B     ($0  #@   AH  "HH    !!$   X   (Q   4Z    " 2   (   "
+M/   *BP    "$0  #@   DL  !78    (!(   @   )8   7<      2    
+M   "70  *C     ($0  #@   G,  "HX    !!$   X   )Z   J/     (1
+M   .   "@@  *D     $$0  #@   I$  "I$     1$   X   *?   J2   
+M  01   .   "KP  *DP    $$0  #@   KT  "I0    !!$   X   +4   9
+M$     01   *   "X0  $]@     $@  "    ND  "I4    !!$   X   +X
+M   J6     01   .   #$   *EP    ($0  #@   R,  !8@     !(     
+M  ,M   J9     01   .   #0@  *F@    $$0  #@   TD  "DP     !$ 
+M__$   -?   J;     01   .   #=@  *G     $$0  #@   X<  "DD    
+M!!$   L   .9   J>    !@1   .   #HP  *I     8$0  #@   ZT  "JH
+M     A$   X   .Z   JK     01   .   #R@  *K     $$0  #@   ^  
+M !8     (!(   @   /N   5$    " 2   (   $    *4P     $0#_\0  
+M! D  "JT    "!$   X   07   JO     01   .   $)P  %8@    @$@  
+M"   !#H  "K     !!$   X   10   JQ     @1   .   $70  $K      
+M$@  !@  !&,  "K,     1$   X   1J   JT     01   .   $<@  %$@ 
+M   @$@  "   !(<  "K8    D!$   X   2.   K:     01   .   $F   
+M%)@    @$@  "   !*P  "MP    "!$   X   2U   K>     @1   .   $
+MO0  %3@    @$@  " !G9&)M90!C<G0Q+G, 8W)T:2YS '9A;'5E<RU8="YC
+M &=D8FUE+F, <VA?9&%T82YC &-R=&XN<P!V7W5N<VEG;F5D7VEN= !V7W-I
+M9VYE9%]I;G0 =E]C:&%R7V9U;F, 7V9I;FD =E]U;G-I9VYE9%]C:&%R7V%R
+M<F%Y &UA:6X =E]S:6=N961?;&]N9P!V7W5N<VEG;F5D7W-H;W)T7W!O:6YT
+M97( 7V-L96%N=7  7V5N9 !V7W5N<VEG;F5D7W-H;W)T '9?=6YS:6=N961?
+M<VAO<G1?9G5N8P!V7V1O=6)L90!V7VEN= !?<W1A<G0 ;F]N<')I;6%R>0!?
+M96YV:7)O;@!V7W5N<VEG;F5D7VQO;F=?<&]I;G1E<@!V7VEN=%]A<G)A>0!P
+M<FEM87)Y '9?<VEG;F5D7V-H87)?9G5N8P!V7V1O=6)L95]A<G)A>0!?971E
+M>'0 =E]S:6=N961?8VAA<E]A<G)A>0!V7W5N<VEG;F5D7V-H87( =E]F;&]A
+M= !V7W-I9VYE9%]L;VYG7V%R<F%Y &%T97AI= !E;G9I<F]N '9?;&]N9U]F
+M=6YC '9?<VEG;F5D7W-H;W)T7V%R<F%Y '9?=6YS:6=N961?;&]N9U]F=6YC
+M '9?:6YT7W!O:6YT97( 7V5D871A '9?<VAO<G1?9G5N8P!V7W5N<VEG;F5D
+M7VEN=%]A<G)A>0!V7W5N<VEG;F5D7VEN=%]P;VEN=&5R '9?:6YT7V9U;F, 
+M=E]S:6=N961?<VAO<G0 =E]F;&]A=%]F=6YC &5X:70 =E]U;G-I9VYE9%]L
+M;VYG7V%R<F%Y '9?;&]N9P!V7W-H;W)T '9?;&]N9U]P;VEN=&5R '9?<VEG
+M;F5D7V-H87( =E]U;G-I9VYE9%]L;VYG '9?<VAO<G1?87)R87D =E]U;G-I
+M9VYE9%]S:&]R=%]A<G)A>0!?;&EB7W9E<G-I;VX 7VUC;W5N= !V7V-H87)?
+M<&]I;G1E<@!V7W5N<VEG;F5D7V-H87)?<&]I;G1E<@!V7W-I9VYE9%]I;G1?
+M87)R87D 7U]F<'-T87)T '9?<VEG;F5D7VEN=%]P;VEN=&5R '-?;&EN:P!?
+M1TQ/0D%,7T]&1E-%5%]404),15\ =E]S:6=N961?<VAO<G1?<&]I;G1E<@!V
+M7V1O=6)L95]P;VEN=&5R %]?;&]N9V1O=6)L95]U<V5D '9?<W1R=6-T,0!V
+M7W-T<G5C=#( =E]C:&%R7V%R<F%Y '9?9FQO871?<&]I;G1E<@!V7W-I9VYE
+M9%]L;VYG7W!O:6YT97( =E]D;W5B;&5?9G5N8P!V7W-I9VYE9%]I;G1?9G5N
+M8P!?1%E.04U)0P!V7V9L;V%T7V%R<F%Y '9?<VAO<G1?<&]I;G1E<@!V7W-I
+M9VYE9%]L;VYG7V9U;F, =E]S:6=N961?8VAA<E]P;VEN=&5R '9?;&]N9U]A
+M<G)A>0!?:6YI= !V7V-H87( 8VQU;FME<@!V7W5N<VEG;F5D7V-H87)?9G5N
+M8P!U7VQI;FL <W!O<G1S8V%R '9?<VEG;F5D7W-H;W)T7V9U;F, =E]U;FEO
+M;C( =E]U;FEO;@!V7W5N<VEG;F5D7VEN=%]F=6YC   N:6YT97)P "YH87-H
+M "YD>6YS>6T +F1Y;G-T<@ N<F5L82YP;'0 +FEN:70 +G!L=  N=&5X=  N
+M9FEN:0 N<F]D871A "YD871A "YG;W0 +F1Y;F%M:6, +F)S<P N<WEM=&%B
+M "YS=')T86( +G-H<W1R=&%B "YC;VUM96YT "YD96)U9P N;&EN90 D2&5A
+M9&5R.B O<"]20U,O=71I;#(M,BXQ+W5S<B]S<F,O;&EB+VQI8F,O:3@V,"]C
+M<W4O8W)T,2YS+'8@,BXQ(#DR+S U+S$T(# W.C$V.C(P(&1A=FED;V9F($5X
+M<" D $ H(RE&5%@@,BXQ+C N,2!S8V1E.B]U<W(O8V-S+VQI8B]C<G0Q+F\ 
+M)$AE861E<CH@+W O4D-3+W5T:6PR+3(N,2]U<W(O<W)C+VQI8B]L:6)C+VDX
+M-C O8W-U+V-R=&DN<RQV(#(N,2 Y,B\P-2\Q-" P-SHQ-CHR,2!D879I9&]F
+M9B!%>' @) ! *",I1E18(#(N,2XP+C$@<V-D93HO=7-R+V-C<R]L:6(O8W)T
+M:2YO "1(96%D97(Z("]P+U)#4R]U=&EL,BTR+C$O=7-R+W-R8R]L:6(O;&EB
+M8R]P;W)T+V=E;B]V86QU97,M6'0N8RQV(#(N,2 Y,B\P-2\Q-" P-SHR-SHP
+M,B!D879I9&]F9B!%>' @)  D2&5A9&5R.B O<"]20U,O=71I;#(M,BXQ+W5S
+M<B]S<F,O;&EB+VQI8F,O:6YC+W-Y;F]N>6US+F@L=B R+C$@.3(O,#4O,30@
+M,#<Z,C(Z,3D@9&%V:61O9F8@17AP("0 )$AE861E<CH@+W O4D-3+W5T:6PR
+M+3(N,2]U<W(O<W)C+VAE860O;6%T:"YH+'8@,BXQ(#DR+S U+S$T(# W.C$R
+M.C4W(&1A=FED;V9F($5X<" D &%C;VUP.B H4T-$12D@-2XP(#$R+S X+S@Y
+M &%S.B H4T-$12D@-2XP(#$R+S X+S@Y $ H(RE&5%@@,BXQ+C N,2!S8V1E
+M.B]U<W(O8V-S+VQI8B]V86QU97,M6'0N;P!A8V]M<#H@*%-#1$4I(#4N," Q
+M,B\P."\X.0!A<SH@*%-#1$4I(#4N," Q,B\P."\X.0 D2&5A9&5R.B O<"]2
+M0U,O=71I;#(M,BXQ+W5S<B]S<F,O;&EB+VQI8F,O:3@V,"]G96XO<VA?9&%T
+M82YC+'8@,BXQ(#DR+S U+S$T(# W.C$W.C4T(&1A=FED;V9F($5X<" D &%C
+M;VUP.B H4T-$12D@-2XP(#$R+S X+S@Y &%S.B H4T-$12D@-2XP(#$R+S X
+M+S@Y $ H(RE&5%@@,BXQ+C N,2!S8V1E.B]U<W(O8V-S+VQI8B]L:6)C+G-O
+M "1(96%D97(Z("]P+U)#4R]U=&EL,BTR+C$O=7-R+W-R8R]L:6(O;&EB8R]I
+M.#8P+V-S=2]C<G1N+G,L=B R+C$@.3(O,#4O,30@,#<Z,38Z,C(@9&%V:61O
+M9F8@17AP("0 0"@C*4946" R+C$N,"XQ('-C9&4Z+W5S<B]C8W,O;&EB+V-R
+M=&XN;P @;&0@.B H4T-$12D@-2XP(#$R+S X+S@Y     "X $0 2   6<  X
+M9V1B;64N8P !-@    $!$0  $_ !(0  &0 !!@         = !, $@   4X 
+M.'1?<W1R=6-T  "V    &    "H #0 2    =0 X=E]C:&%R7VUE;6)E<@  
+M50 ! ", !@0     !P   "L #0 2    H  X=E]S:&]R=%]M96UB97(  %4 
+M!  C  8$     @<    I  T $@   ,D .'9?:6YT7VUE;6)E<@  50 ' ", 
+M!@0    $!P   "H #0 2    \P X=E]L;VYG7VUE;6)E<@  50 * ", !@0 
+M   (!P   "L #0 2   !'@ X=E]F;&]A=%]M96UB97(  %4 #@ C  8$    
+M# <    L  T $@   4H .'9?9&]U8FQE7VUE;6)E<@  50 / ", !@0    0
+M!P    0    ; !, $@   FP ."XP9F%K90  M@   !@    J  T $@   9, 
+M.'9?8VAA<E]M96UB97(  %4  0 C  8$      <    K  T $@   ;X .'9?
+M<VAO<G1?;65M8F5R  !5  0 (P &!     ('    *0 - !(   'G #AV7VEN
+M=%]M96UB97(  %4 !P C  8$    ! <    J  T $@   A$ .'9?;&]N9U]M
+M96UB97(  %4 "@ C  8$    " <    K  T $@   CP .'9?9FQO871?;65M
+M8F5R  !5  X (P &!     P'    +  - !(   )H #AV7V1O=6)L95]M96UB
+M97(  %4 #P C  8$    $ <    $    '  7 !(   .+ #AT7W5N:6]N  "V
+M    "    "H #0 2   "L@ X=E]C:&%R7VUE;6)E<@  50 ! ", !@0     
+M!P   "L #0 2   "W0 X=E]S:&]R=%]M96UB97(  %4 !  C  8$      < 
+M   I  T $@   P8 .'9?:6YT7VUE;6)E<@  50 ' ", !@0     !P   "H 
+M#0 2   #,  X=E]L;VYG7VUE;6)E<@  50 * ", !@0     !P   "L #0 2
+M   #6P X=E]F;&]A=%]M96UB97(  %4 #@ C  8$      <    L  T $@  
+M X< .'9?9&]U8FQE7VUE;6)E<@  50 / ", !@0     !P    0    ; !< 
+M$@  !*D ."XQ9F%K90  M@    @    J  T $@   ]  .'9?8VAA<E]M96UB
+M97(  %4  0 C  8$      <    K  T $@   _L .'9?<VAO<G1?;65M8F5R
+M  !5  0 (P &!      '    *0 - !(   0D #AV7VEN=%]M96UB97(  %4 
+M!P C  8$      <    J  T $@  !$X .'9?;&]N9U]M96UB97(  %4 "@ C
+M  8$      <    K  T $@  !'D .'9?9FQO871?;65M8F5R  !5  X (P &
+M!      '    +  - !(   2E #AV7V1O=6)L95]M96UB97(  %4 #P C  8$
+M      <    $    *@ & !(   37 #AV7V-H87)?9G5N8P  50 ! 1$  !/X
+M 2$  !08    !    #$ !@ 2   %#  X=E]S:6=N961?8VAA<E]F=6YC  !5
+M  (!$0  %" !(0  %$     $    ,P & !(   5# #AV7W5N<VEG;F5D7V-H
+M87)?9G5N8P  50 # 1$  !1( 2$  !1H    !    "L !@ 2   %<@ X=E]S
+M:&]R=%]F=6YC  !5  0!$0  %' !(0  %)     $    ,@ & !(   6H #AV
+M7W-I9VYE9%]S:&]R=%]F=6YC  !5  4!$0  %)@!(0  %+@    $    -  &
+M !(   7@ #AV7W5N<VEG;F5D7W-H;W)T7V9U;F,  %4 !@$1   4P $A   4
+MX     0    I  8 $@  !@T .'9?:6YT7V9U;F,  %4 !P$1   4Z $A   5
+M"     0    P  8 $@  !D$ .'9?<VEG;F5D7VEN=%]F=6YC  !5  @!$0  
+M%1 !(0  %3     $    ,@ & !(   9W #AV7W5N<VEG;F5D7VEN=%]F=6YC
+M  !5  D!$0  %3@!(0  %5@    $    *@ & !(   :E #AV7VQO;F=?9G5N
+M8P  50 * 1$  !5@ 2$  !6     !    #$ !@ 2   &V@ X=E]S:6=N961?
+M;&]N9U]F=6YC  !5  L!$0  %8@!(0  %:@    $    ,P & !(   <1 #AV
+M7W5N<VEG;F5D7VQO;F=?9G5N8P  50 , 1$  !6P 2$  !70    !    "L 
+M!@ 2   '0  X=E]F;&]A=%]F=6YC  !5  X!$0  %=@!(0  %?@    $    
+M+  & !(   =P #AV7V1O=6)L95]F=6YC  !5  \!$0  %@ !(0  %B     $
+M    %0 5 !(   >N (, !0$   ?J    %0 % !(   >: (, !0$   ?J    
+M$  % !(   >J %4 !P    0    \  $ $@  !^H E0   *, *   "       
+M       (          $   @          @@ <@   "X    9 !, $@  "'L 
+M.&QI;FL  +8   "8    )@ - !(   @I #AN97AT  "#  4!   'Z@ C  8$
+M      <    J  T $@  "%, .&QI;FMF=6YC  "#  4!   '<  C  8$    
+M! <    D  T $@  "'< .'-T=69F  !R   'K@ C  8$    " <    $    
+M%0 5 !(   BY (, !0$   ?J    %0 % !(   BE (, !0$   ?J    $  %
+M !(   BU %4 !P    0    \  $ $@  "/4 E0   *, *   "           
+M   (          $   @          @@ <@   "X    < !< $@  "8D .'1U
+M7VQI;FL  +8   "0    )@ - !(   DW #AN97AT  "#  4!   'Z@ C  8$
+M      <    J  T $@  "6$ .&QI;FMF=6YC  "#  4!   (>P C  8$    
+M  <    D  T $@  "84 .'-T=69F  !R   (N0 C  8$      <    $    
+M.@ $ !(   G' #@N,F9A:V4  +8    $ /, &P    )B;'5E      %G<F5E
+M;@      <F5D      0    ^  0 $@  "@D .&-O;&]R<P  M@    0 \P ?
+M     G!I;FL      7!U<G!L90      >65L;&]W      0    R  0 $@  
+M"C\ ."XS9F%K90  M@    0 \P 3     69O<F0      &-H979Y      0 
+M   Q  0 $@  "G0 .&-A<G,  +8    $ /, %     %P;W)S8VAE      !B
+M;7<     !    #( !  2   *J@ X+C1F86ME  "V    ! #S !,    !5%)5
+M10      1D%,4T4     !    !P %@ 2   *Q@ X8F]O;&5A;@  <@  "G0 
+M   Q  0 $@  "OL .&)V86QS  "V    ! #S !,    !=')U90      9F%L
+M<V4     !    !T %@ 2   +&  X8F]O;&5A;C(  '(   K&    1@ $ !( 
+M  MB #AM:7-O<F1E<F5D  "V    ! #S ",    #=&AR964      'IE<F\ 
+M     6]N90     "='=O      0    C  8 $@  "XD .&UA:6X  %4 !P$1
+M   6* $A   9      0    G  < $@  "[  .'-P;W)T<V-A<@  <@  "C\ 
+M(P % P  *V@    E  < $@  "]4 .&-L=6YK97(  '(   H) ", !0,  "K0
+M    *  ' !(   O] #AN;VYP<FEM87)Y  !R   )QP C  4#   IY    "4 
+M!P 2   ,(@ X<')I;6%R>0  <@  "8D (P % P  *?0    D  < $@  #$8 
+M.'5?;&EN:P  <@  "/4 (P % P  *M@    G  < $@  #&T .'-?;&EN:P  
+M@P % 0  !^H (P % P  *F@    F  < $@  #), .'9?=6YI;VXR  !R   #
+MBP C  4#   K<    "4 !P 2   ,N  X=E]U;FEO;@  <@   FP (P % P  
+M*W@    G  < $@  #-\ .'9?<W1R=6-T,@  <@   4X (P % P  *I     G
+M  < $@  #08 .'9?<W1R=6-T,0  <@   "X (P % P  *G@    O  < $@  
+M#34 .'9?9&]U8FQE7W!O:6YT97(  &,  P$ #P C  4#   J<    "X !P 2
+M   -8P X=E]F;&]A=%]P;VEN=&5R  !C  ,!  X (P % P  *JP    V  < 
+M$@  #9D .'9?=6YS:6=N961?;&]N9U]P;VEN=&5R  !C  ,!  P (P % P  
+M*>@    T  < $@  #<T .'9?<VEG;F5D7VQO;F=?<&]I;G1E<@  8P # 0 +
+M ", !0,  "JP    +0 ' !(   WZ #AV7VQO;F=?<&]I;G1E<@  8P # 0 *
+M ", !0,  "I     -0 ' !(   XO #AV7W5N<VEG;F5D7VEN=%]P;VEN=&5R
+M  !C  ,!  D (P % P  *B@    S  < $@  #F( .'9?<VEG;F5D7VEN=%]P
+M;VEN=&5R  !C  ,!  @ (P % P  *F0    L  < $@  #HX .'9?:6YT7W!O
+M:6YT97(  &,  P$ !P C  4#   J'    #< !P 2   .Q0 X=E]U;G-I9VYE
+M9%]S:&]R=%]P;VEN=&5R  !C  ,!  8 (P % P  *=     U  < $@  #OH 
+M.'9?<VEG;F5D7W-H;W)T7W!O:6YT97(  &,  P$ !0 C  4#   J;    "X 
+M!P 2   /*  X=E]S:&]R=%]P;VEN=&5R  !C  ,!  0 (P % P  *KP    V
+M  < $@  #UX .'9?=6YS:6=N961?8VAA<E]P;VEN=&5R  !C  ,!  , (P %
+M P  *E@    T  < $@  #Y( .'9?<VEG;F5D7V-H87)?<&]I;G1E<@  8P #
+M 0 " ", !0,  "K     +0 ' !(   ^_ #AV7V-H87)?<&]I;G1E<@  8P #
+M 0 ! ", !0,  "I4    )  ! !(   _C )4   "C !    @          0@ 
+M50 /    +  ' !(  ! / #AV7V1O=6)L95]A<G)A>0  <@  #[\ (P % P  
+M*?@    D  $ $@  $#, E0   *, $   "          !" !5  X    K  < 
+M$@  $%X .'9?9FQO871?87)R87D  '(  ! / ", !0,  "JT    )  ! !( 
+M !"" )4   "C !    @          0@ 50 ,    ,P ' !(  !"U #AV7W5N
+M<VEG;F5D7VQO;F=?87)R87D  '(  !!> ", !0,  "HP    )  ! !(  !#9
+M )4   "C !    @          0@ 50 +    ,0 ' !(  !$* #AV7W-I9VYE
+M9%]L;VYG7V%R<F%Y  !R   0M0 C  4#   J$    "0  0 2   1+@"5    
+MHP 0   (          $( %4 "@   "H !P 2   16  X=E]L;VYG7V%R<F%Y
+M  !R   1"@ C  4#   JQ    "0  0 2   1? "5    HP 0   (        
+M  $( %4 "0   #( !P 2   1K@ X=E]U;G-I9VYE9%]I;G1?87)R87D  '( 
+M !%8 ", !0,  "H@    )  ! !(  !'2 )4   "C !    @          0@ 
+M50 (    ,  ' !(  !(" #AV7W-I9VYE9%]I;G1?87)R87D  '(  !&N ", 
+M!0,  "I<    )  ! !(  !(F )4   "C !    @          0@ 50 '    
+M*0 ' !(  !)/ #AV7VEN=%]A<G)A>0  <@  $@( (P % P  *>P    D  $ 
+M$@  $G, E0   *, $   "          !" !5  8    T  < $@  $J< .'9?
+M=6YS:6=N961?<VAO<G1?87)R87D  '(  !)/ ", !0,  "I0    )  ! !( 
+M !++ )4   "C !    @          0@ 50 %    ,@ ' !(  !+] #AV7W-I
+M9VYE9%]S:&]R=%]A<G)A>0  <@  $J< (P % P  *A@    D  $ $@  $R$ 
+ME0   *, $   "          !" !5  0    K  < $@  $TP .'9?<VAO<G1?
+M87)R87D  '(  !+] ", !0,  "I,    )  ! !(  !-P )4   "C !    @ 
+M         0@ 50 #    ,P ' !(  !.C #AV7W5N<VEG;F5D7V-H87)?87)R
+M87D  '(  !-, ", !0,  "G(    )  ! !(  !/' )4   "C !    @     
+M     0@ 50 "    ,0 ' !(  !/X #AV7W-I9VYE9%]C:&%R7V%R<F%Y  !R
+M   3HP C  4#   J"    "0  0 2   4' "5    HP 0   (          $(
+M %4  0   "H !P 2   41@ X=E]C:&%R7V%R<F%Y  !R   3^  C  4#   J
+MJ    "0 !P 2   4:@ X=E]D;W5B;&4  %4 #P C  4#   IV    ", !P 2
+M   4C0 X=E]F;&]A=   50 . ", !0,  "H,    *P ' !(  !2X #AV7W5N
+M<VEG;F5D7VQO;F<  %4 #  C  4#   J2    "D !P 2   4X0 X=E]S:6=N
+M961?;&]N9P  50 + ", !0,  "G,    (@ ' !(  !4# #AV7VQO;F<  %4 
+M"@ C  4#   J.    "H !P 2   5+0 X=E]U;G-I9VYE9%]I;G0  %4 "0 C
+M  4#   IP    "@ !P 2   550 X=E]S:6=N961?:6YT  !5  @ (P % P  
+M*<0    A  < $@  %78 .'9?:6YT  !5  < (P % P  *>     L  < $@  
+M%:( .'9?=6YS:6=N961?<VAO<G0  %4 !@ C  4#   IU    "H !P 2   5
+MS  X=E]S:6=N961?<VAO<G0  %4 !0 C  4#   J+    ", !P 2   5[P X
+M=E]S:&]R=   50 $ ", !0,  "H\    *P ' !(  !8: #AV7W5N<VEG;F5D
+M7V-H87(  %4  P C  4#   J"@   "D !P 2   60P X=E]S:6=N961?8VAA
+M<@  50 " ", !0,  "I$    (@ ' !(  !9E #AV7V-H87(  %4  0 C  4#
+M   JS     0    '       "D@  $_    !Y__\    (    >O__    ,   
+M 'O__P   %@   !]__\   "     ?O__    J    '___P   -    "!__\ 
+M  #X    @O__   !(    (/__P   4@   "%__\   %P    AO__   !F   
+M (?__P   <    ")__\   'H    BO__   "$    ++__P   C@   "U__\ 
+M  )$    MO__   "3    +?__P   E@   "Y__\   )D    NO__   "<   
+M +O__P   GP   "]__\   *(    OO__   "E    +___P   J    #!__\ 
+M  *L    PO__   "N    ,/__P   L0   #%__\   +0    QO__   "X   
+M ,G__P   O    #*__\   ,     R___   #$    ,W__P   R    #.__\ 
+M  ,P    S___   #0    -'__P   U    #2__\   -@    T___   #<   
+M -7__P   X    #6__\   .0    U___   #H    -G__P   [    #:__\ 
+M  /     W/__   #T    -W__P   ^    #>__\   /P    X/__   $    
+M .'__P  !!    #B__\   0@    Y/__   $,    .7__P  !$    #F__\ 
+M  10    Z/__   $8    .G__P  !'    #J__\   2     [/__   $D   
+M .W__P  !*    #O__\   2P    \/__   $O    /'__P  !,@   #R__\ 
+M  34    ]/__   $X    /;__P  !/    #W__\   3P     /__   %$   
+M                                                          $ 
+M   !     @  $-0   #4    $P               0         )    !0  
+M  (  !#H    Z    $@    #          0    $    #P    L    "   1
+M,    3    #0    !     (    $    $    !<    #     @  $@    ( 
+M    >P               0         ?    !     (  !)\   "?    #  
+M   #    !P    0    ,    *0    P    &   2L    K     0        
+M       0    "    "\    ,    !@  $L    +     @               
+M$     @    T    #     8  !-    #0   !<               !     (
+M    .@    P    &   9    "0     0               0    "    $  
+M   !     @  &1    D0    %               "         !(     0  
+M  ,  "DD   ))     @               0         3@    $    #   I
+M,   "3     <               0    !    %,    &     P  *4P   E,
+M    <     0         !     @   !<    "     ,  "G    )P    <  
+M              @         80    (             "<    <     $   
+M !P    $    $    &D    #             !#    $T0              
+M 0        !Q     P             5D0   )$               $     
+M    >P    $             %B(   0N               !         (0 
+M   !             !I0   6<               !         "+     0  
+>           PP    I(               $     
+ 
+end
diff --git a/gdb/testsuite/gdb.base/int-type.c b/gdb/testsuite/gdb.base/int-type.c
new file mode 100644
index 0000000..548ca9c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/int-type.c
@@ -0,0 +1,25 @@
+
+int x;
+int y;
+int z;
+int w;
+
+
+
+int main ()
+{
+   
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+
+    x = 14;
+    y = 3;
+    z = 2;
+    w = 2;
+
+    return 0;
+    
+}
+
diff --git a/gdb/testsuite/gdb.base/interrupt.c b/gdb/testsuite/gdb.base/interrupt.c
new file mode 100644
index 0000000..120697b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/interrupt.c
@@ -0,0 +1,37 @@
+#include <errno.h>
+#include <stdio.h>
+int
+main ()
+{
+  char x;
+  int nbytes;
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  printf ("talk to me baby\n");
+  while (1)
+    {
+      nbytes = read (0, &x, 1);
+      if (nbytes < 0)
+	{
+#ifdef EINTR
+	  if (errno != EINTR)
+#endif
+	    perror ("");
+	}
+      else if (nbytes == 0)
+	{
+	  printf ("end of file\n");
+	  exit (0);
+	}
+      else
+	write (1, &x, 1);
+    }
+}
+
+int
+func1 ()
+{
+  return 4;
+}
diff --git a/gdb/testsuite/gdb.base/interrupt.exp b/gdb/testsuite/gdb.base/interrupt.exp
new file mode 100644
index 0000000..60cf838
--- /dev/null
+++ b/gdb/testsuite/gdb.base/interrupt.exp
@@ -0,0 +1,175 @@
+# Copyright (C) 1994, 1995, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if [host_info exists name] {
+    if [board_info host exists gdb,nointerrupts] {
+	verbose "Skipping interrupt.exp because of nointerrupts."
+	continue
+    }
+}
+
+if [target_info exists gdb,noinferiorio] {
+    verbose "Skipping interrupt.exp because of noinferiorio."
+    return
+}
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile interrupt
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_start
+
+
+if ![file exists $binfile] then {
+    perror "$binfile does not exist."
+    return 0
+} else {
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+    # Hope this is unix :-)
+    gdb_test "shell stty intr '^C'" "" \
+	"set interrupt character in interrupt.exp"
+    if [runto_main] then {
+	send_gdb "continue\n"
+	gdb_expect {
+	    -re "\r\ntalk to me baby\r\n$" {
+		pass "child process is alive"
+	    }
+	    timeout { fail "run (timeout)" }
+	    eof { fail "run (eof)" }
+	}
+	# This should appear twice, once for the echo and once for the
+	# program's output.  Under dejagnu (but not interactively) for
+	# SunOS4, it only appears once.  Don't worry about it, I imagine
+	# dejagnu has just done something to the tty modes.
+	send_gdb "a\n"
+	gdb_expect {
+	    -re "^a\r\n(|a\r\n)$" {
+		pass "child process ate our char"
+	    }
+	    timeout { fail "echo a (timeout)" }
+	    eof { fail "echo a (eof)" }
+	}
+	# Wait until the program is in the read system call again.
+	sleep 2
+
+	# Cntrl-c may fail for simulator targets running on a BSD host.
+	# This is the result of a combination of the read syscall
+	# being restarted and gdb capturing the cntrl-c signal.
+
+	# Cntrl-c may fail for simulator targets on slow hosts.
+	# This is because there is a race condition between entering
+	# the read and delivering the cntrl-c.
+
+	send_gdb "\003"
+	gdb_expect {
+	    -re "Program received signal SIGINT.*$gdb_prompt $" {
+		pass "send_gdb control C"
+	    }
+	    -re ".*$gdb_prompt $" { fail "send_gdb control C" }
+	    timeout { fail "send_gdb control C (timeout)" }
+	    eof { fail "send_gdb control C (eof)" }
+	}
+
+	send_gdb "p func1 ()\n"
+	gdb_expect {
+	    -re " = 4.*$gdb_prompt $" { pass "call function when asleep" }
+	    -re ".*Program received signal SIGSEGV.*$gdb_prompt $" {
+		setup_xfail "i*86-pc-linux*-gnu*"
+		fail "child died when we called func1, skipped rest of tests"
+		return
+	    }
+	    -re "$gdb_prompt $" { fail "call function when asleep (wrong output)" }
+	    default {
+
+		# This fail probably happens whenever we use /proc (we
+		# don't use PRSABORT), but apparently also happens on
+		# other machines as well.
+
+		setup_xfail "sparc*-*-solaris2*"
+		setup_xfail "mips-*-ultrix*"
+		setup_xfail "hppa*-*-*"
+		setup_xfail "i386*-*-bsd*"
+		setup_xfail "i*86-*-solaris2*"
+		setup_xfail "*-*-sysv4*"
+		setup_xfail "vax-*-*"
+		setup_xfail "alpha-*-*"
+		setup_xfail "*-*-irix*"
+		setup_xfail "*-*-hpux*"
+		setup_xfail "*-*-*lynx*"
+		fail "call function when asleep (stays asleep)"
+		# Send_Gdb a newline to wake it up
+		send_gdb "\n"
+		gdb_test "" " = 4" "call function after waking it"
+	    }
+#	    eof { fail "call function when asleep (eof)" }
+	}
+
+	# Now try calling the function again.
+	gdb_test "p func1 ()" " = 4" "call function a second time"
+
+	# And the program should still be doing the same thing.
+	# The optional trailing \r\n is in case we sent a newline above
+	# to wake the program, in which case the program now sends it
+	# back.  We check for it either here or in the next gdb_expect
+	# command, because which one it ends up in is timing dependent.
+	send_gdb "continue\n"
+	# For some reason, i386-*-sysv4 gdb fails to issue the Continuing
+	# message, but otherwise appears normal (FIXME).
+	gdb_expect {
+	    -re "^continue\r\nContinuing.\r\n(\r\n|)$" { pass "continue" }
+	    -re "^continue\r\n\r\n" { fail "continue (missing Continuing.)" }
+	    -re "$gdb_prompt $" { fail "continue" }
+	    timeout { fail "continue (timeout)" }
+	    eof { fail "continue (eof)" }
+	}
+
+	send_gdb "data\n"
+	# The optional leading \r\n is in case we sent a newline above
+	# to wake the program, in which case the program now sends it
+	# back.
+	gdb_expect {
+	    -re "^(\r\n|)data\r\n(|data\r\n)$" { pass "echo data" }
+	    timeout { fail "echo data (timeout)" }
+	    eof { fail "echo data (eof)" }
+	}
+
+	setup_xfail "i*86-pc-linux*-gnu*"
+	send_gdb "\004"
+	gdb_expect {
+	    -re "end of file.*Program exited normally.*$gdb_prompt $" {
+		pass "send_gdb end of file"
+	    }
+	    -re "$gdb_prompt $" { fail "send end of file" }
+	    timeout { fail "send end of file (timeout)" }
+	    eof { fail "send end of file (eof)" }
+	}
+    }
+}
+return 0
diff --git a/gdb/testsuite/gdb.base/jump.c b/gdb/testsuite/gdb.base/jump.c
new file mode 100644
index 0000000..e16d0fd
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump.c
@@ -0,0 +1,19 @@
+/* This program is used to test the "jump" command.  There's nothing
+   particularly deep about the functionality nor names in here.
+   */
+
+static int square (x)
+  int  x;
+{
+  return x*x;
+}
+
+
+main ()
+{
+  int i = 99;
+
+  i++;
+  i = square (i);
+  i--;
+}
diff --git a/gdb/testsuite/gdb.base/jump.exp b/gdb/testsuite/gdb.base/jump.exp
new file mode 100644
index 0000000..c110e21
--- /dev/null
+++ b/gdb/testsuite/gdb.base/jump.exp
@@ -0,0 +1,192 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+  return 0
+}
+
+clear_xfail "*-*-*"
+
+set testfile "jump"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# Build the test case
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+  perror "Couldn't run to main"
+  return -1
+}
+
+# Set a breakpoint on the statement that we're about to jump to.
+# The statement doesn't contain a function call.
+#
+send_gdb "break 18\n"
+set bp_on_non_call 0
+gdb_expect {
+  -re "\[Bb\]reakpoint (\[0-9\]*) at 0x\[0-9a-fA-F\]*: file .*${srcfile}, line 18.*$gdb_prompt $"\
+          {set bp_on_non_call $expect_out(1,string)
+           pass "break before jump to non-call"}
+  -re "$gdb_prompt $"\
+          {fail "break before jump to non-call"}
+  timeout {fail "(timeout) break before jump to non-call"}
+}
+
+# Can we jump to the statement?  Do we stop there?
+#
+send_gdb "jump 18\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, .*${srcfile}:18.*$gdb_prompt $"\
+          {pass "jump to non-call"}
+  -re "$gdb_prompt $"\
+          {fail "jump to non-call"}
+  timeout {fail "(timeout) jump to non-call"}
+}
+
+# Set a breakpoint on the statement that we're about to jump to.
+# The statement does contain a function call.
+#
+send_gdb "break 17\n"
+set bp_on_call 0
+gdb_expect {
+  -re "\[Bb\]reakpoint (\[0-9\]*) at 0x\[0-9a-fA-F\]*: file .*${srcfile}, line 17.*$gdb_prompt $"\
+          {set bp_on_call $expect_out(1,string)
+           pass "break before jump to call"}
+  -re "$gdb_prompt $"\
+          {fail "break before jump to call"}
+  timeout {fail "(timeout) break before jump to call"}
+}
+
+# Can we jump to the statement?  Do we stop there?
+#
+send_gdb "jump 17\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, .*${srcfile}:17.*$gdb_prompt $"\
+          {pass "jump to call"}
+  -re "$gdb_prompt $"\
+          {fail "jump to call"}
+  timeout {fail "(timeout) jump to call"}
+}
+
+# If we disable the breakpoint at the function call, and then
+# if we jump to that statement, do we not stop there, but at
+# the following breakpoint?
+#
+send_gdb "disable $bp_on_call\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "disable breakpoint on call"}
+  timeout {fail "(timeout) disable breakpoint on call"}
+}
+
+send_gdb "jump 17\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, .*${srcfile}:18.*$gdb_prompt $"\
+          {pass "jump to call with disabled breakpoint"}
+  -re "$gdb_prompt $"\
+          {fail "jump to call with disabled breakpoint"}
+  timeout {fail "(timeout) jump to call with disabled breakpoint"}
+}
+
+# Verify that GDB responds gracefully to the "jump" command without
+# an argument.
+#
+send_gdb "jump\n"
+gdb_expect {
+  -re "Argument required .starting address..*$gdb_prompt $"\
+          {pass "jump without argument disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "jump without argument disallowed"}
+  timeout {fail "(timeout) jump without argument disallowed"}
+}
+
+# Verify that GDB responds gracefully to the "jump" command with
+# trailing junk.
+#
+send_gdb "jump 17 100\n"
+gdb_expect {
+  -re "Junk at end of line specification: 100.*$gdb_prompt $"\
+          {pass "jump with trailing argument junk"}
+  -re "$gdb_prompt $"\
+          {fail "jump with trailing argument junk"}
+  timeout {fail "(timeout) jump with trailing argument junk"}
+}
+
+# Verify that GDB responds gracefully to a request to jump out of
+# the current function.  (Note that this will very likely cause the
+# inferior to die.  Be prepared to rerun the inferior, if further
+# testing is desired.)
+#
+# Try it both ways: confirming and not confirming the jump.
+#
+send_gdb "jump 8\n"
+gdb_expect {
+  -re "Line 8 is not in `main'.  Jump anyway.*y or n. $"\
+          {send_gdb "n\n"
+           gdb_expect {
+             -re "Not confirmed.*$gdb_prompt $"\
+                     {pass "aborted jump out of current function"}
+             -re "$gdb_prompt $"\
+                     {fail "aborted jump out of current function"}
+             timeout {fail "(timeout) aborted jump out of current function"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "aborted jump out of current function"}
+  timeout {fail "(timeout) aborted jump out of current function"}
+}
+
+send_gdb "jump 8\n"
+gdb_expect {
+  -re "Line 8 is not in `main'.  Jump anyway.*y or n. $"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re "Continuing at.*$gdb_prompt $"\
+                     {pass "jump out of current function"}
+             -re "$gdb_prompt $"\
+                     {fail "jump out of current function"}
+             timeout {fail "(timeout) jump out of current function"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "jump out of current function"}
+  timeout {fail "(timeout) jump out of current function"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/langs.exp b/gdb/testsuite/gdb.base/langs.exp
new file mode 100644
index 0000000..464c797
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs.exp
@@ -0,0 +1,122 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile langs
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [is_remote host] {
+    remote_download host ${srcdir}/${subdir}/langs1.f
+    remote_download host ${srcdir}/${subdir}/langs2.cxx
+}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/langs0.c" "${binfile}0.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/langs1.c" "${binfile}1.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/langs2.c" "${binfile}2.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile}0.o ${binfile}1.o ${binfile}2.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+gdb_test "b langs0" {Function "langs0" not defined\.} \
+    "break on nonexistent function in langs.exp"
+
+if [runto csub] then {
+
+    gdb_test "show language" "currently c\".*" \
+	"show language at csub in langs.exp"
+    # On some machines, foo doesn't get demangled because the N_SOL for
+    # langs2.cxx is seen only after the function stab for foo.  So
+    # the following regexps are kludged to accept foo__Fi as well as foo,
+    # even though only the latter is correct.  I haven't tried to xfail it
+    # because it depends on details of the compiler.
+    
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "bt" "#0.*csub.*#1.*(foo|foo__Fi) \\(.*#2.*cppsub_ .*#3.*fsub.*#4.*langs0__2do \\(.*#5  \[0-9a-fx\]* in main.*" "backtrace in langs.exp"
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "up" ".* in (foo|foo__Fi) .* at langs2\\.cxx.*return csub \\(.*" \
+	"up to foo in langs.exp"
+    gdb_test "show language" "currently c\\+\\+.*" \
+	"show language at foo in langs.exp"
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "up" ".* in cppsub_ .* at langs2\\.cxx.*return foo \\(.*" \
+	"up to cppsub_ in langs.exp"
+    gdb_test "show language" "currently c\\+\\+.*" \
+	"show language at cppsub_ in langs.exp"
+
+    if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "up" ".* in fsub.* at langs1\\.f.*return \\(cppsub .*" \
+	"up to fsub in langs.exp"
+    gdb_test "show language" "currently fortran.*" \
+	"show language at fsub in langs.exp"
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "up" ".* in langs0__2do .* at .*langs0\\.c.*return fsub.*" \
+	"up to langs0__2do in langs.exp"
+    gdb_test "show language" "currently c\".*" \
+	"show language at langs0__2do in langs.exp"
+
+    gdb_test "up" ".* in main .* at .*langs0\\.c.*if \\(langs0__2do \\(.*" \
+	"up to main in langs.exp"
+    gdb_test "show language" "currently c\".*" \
+	"show language at main in langs.exp"
+
+    if [target_info exists gdb,noresults] { return }
+
+    if [target_info exists use_gdb_stub] {
+	gdb_breakpoint "exit"
+	gdb_test "cont" "Breakpoint .*exit.*" "continue to exit in langs.exp"
+    } else {
+	gdb_test "cont" "Program exited normally\\..*" \
+		"continue to exit in langs.exp"
+    }
+}
+
+return 0
diff --git a/gdb/testsuite/gdb.base/langs0.c b/gdb/testsuite/gdb.base/langs0.c
new file mode 100644
index 0000000..69c0ce8
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs0.c
@@ -0,0 +1,28 @@
+/* This file is actually in C, it is not supposed to simulate something
+   translated from another language or anything like that.  */
+int
+csub (x)
+     int x;
+{
+  return x + 1;
+}
+
+int
+langs0__2do ()
+{
+  return fsub_ () + 2;
+}
+
+int
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  if (langs0__2do () == 5003)
+    /* Success.  */
+    return 0;
+  else
+    return 1;
+}
diff --git a/gdb/testsuite/gdb.base/langs1.c b/gdb/testsuite/gdb.base/langs1.c
new file mode 100644
index 0000000..7842259
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs1.c
@@ -0,0 +1,33 @@
+/* langs1.f -- translated by f2c (version of 5 May 1990  1:12:08).  */
+
+/* f2c output hacked as follows for GDB testsuite:
+   1.  Change commented out "#" lines to #line directives.
+       I don't know why this behavior isn't the default for f2c -g.
+   2.  Remove include of f2c.h and put in just a typedef for "integer".
+   Additional notes:
+   3.  f2c was called as "f2c -g langs1.f".
+   4.  We don't need to use the fortran libraries.  */
+
+typedef int integer;
+
+/* Table of constant values */
+
+static integer c__10000 = 10000;
+
+/* I am not sure whether there is a way to have a fortran program without */
+/* a MAIN, but it does not really harm us to have one. */
+/* Main program */ MAIN__()
+{
+} /* MAIN__ */
+
+#line 4 "langs1.f"
+/* Subroutine */ int fsub_()
+{
+    extern integer cppsub_();
+
+#line 5 "langs1.f"
+#line 6 "langs1.f"
+    return cppsub_(&c__10000);
+#line 7 "langs1.f"
+} /* fsub_ */
+
diff --git a/gdb/testsuite/gdb.base/langs1.f b/gdb/testsuite/gdb.base/langs1.f
new file mode 100644
index 0000000..35ce691
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs1.f
@@ -0,0 +1,7 @@
+c I am not sure whether there is a way to have a fortran program without
+c a MAIN, but it does not really harm us to have one.
+      end
+      subroutine fsub
+        integer*4 cppsub
+        return (cppsub (10000))
+      end
diff --git a/gdb/testsuite/gdb.base/langs2.c b/gdb/testsuite/gdb.base/langs2.c
new file mode 100644
index 0000000..be2a60c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs2.c
@@ -0,0 +1,15 @@
+/* This is intended to be a vague simulation of cfront output.  */
+#line 1 "langs2.cxx"
+extern int csub ();
+int
+foo__Fi (x) int x;
+{
+  return csub (x / 2);
+}
+
+extern int cppsub_ ();
+int
+cppsub_ (y) int *y;
+{
+  return foo__Fi (*y);
+}
diff --git a/gdb/testsuite/gdb.base/langs2.cxx b/gdb/testsuite/gdb.base/langs2.cxx
new file mode 100644
index 0000000..5a2ca8a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/langs2.cxx
@@ -0,0 +1,13 @@
+extern "C" int csub (int);
+int
+foo (int x)
+{
+  return csub (x / 2);
+}
+
+extern "C" int cppsub_ (int *);
+int
+cppsub_ (int *y)
+{
+  return foo (*y);
+}
diff --git a/gdb/testsuite/gdb.base/list.exp b/gdb/testsuite/gdb.base/list.exp
new file mode 100644
index 0000000..f597b9a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/list.exp
@@ -0,0 +1,521 @@
+# Copyright (C) 1992, 1994, 1995, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "list"
+set binfile ${objdir}/${subdir}/${testfile}
+
+# Need to download the header to the host.
+remote_download host ${srcdir}/${subdir}/list0.h list0.h
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/list0.c" "${binfile}0.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/list1.c" "${binfile}1.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+#
+# Local utility proc just to set and verify listsize
+# Return 1 if success, 0 if fail.
+#
+
+set set_listsize_count 0;
+
+proc set_listsize { arg } {
+    global gdb_prompt
+    global set_listsize_count;
+
+    incr set_listsize_count;
+    if [gdb_test "set listsize $arg" "" "setting listsize to $arg #$set_listsize_count"] {
+	return 0;
+    }
+    if { $arg <= 0 } {
+	set arg "unlimited";
+    }
+
+    if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] {
+	return 0;
+    }
+    return 1
+}
+
+#
+# Test display of listsize lines around a given line number.
+#
+
+proc test_listsize {} {
+    global gdb_prompt
+
+    # Show default size
+
+    gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size"
+    
+    # Show the default lines
+    # The second case is for optimized code, it is still correct.
+    
+    if ![isnative] {
+	runto_main;
+	unsupported "list default lines around main";
+    } else {
+	gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*10\[ \t\]+x = 0;|2.*11\[ \t\]+foo .x\[+)\]+;)" "list default lines around main"
+    }
+
+    # Ensure we can limit printouts to one line
+
+    if [ set_listsize 1 ] then {
+	setup_xfail "*-*-*"
+	gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1"
+	setup_xfail "*-*-*"
+	gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1"
+    }    
+
+    # Try just two lines
+    
+    if [ set_listsize 2 ] {
+	gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 2"
+	gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2"
+	gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+main \[)(\]+" "list line 3 with listsize 2"
+    }
+
+    # Try small listsize > 1 that is an odd number
+
+    if [ set_listsize 3 ] {
+	setup_xfail "*-*-*"
+	gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"2\[ \t\]+" "list line 1 with listsize 3"
+	setup_xfail "*-*-*"
+	gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+main \[)(\]+" "list line 2 with listsize 3"
+	
+	setup_xfail "*-*-*"
+	gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3"
+    }
+
+    # Try small listsize > 2 that is an even number.
+
+    if [ set_listsize 4 ] then {
+	gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 4"
+	gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+main \[)(\]+" "list line 2 with listsize 4"
+	
+	gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4"
+	gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4"
+    }
+
+    # Try a size larger than the entire file.
+
+    if [ set_listsize 100 ] then {
+	gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n42\[ \t\]+\}" "list line 1 with listsize 100"
+	
+	gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n42\[ \t\]+\}" "list line 10 with listsize 100"
+    }
+
+    # Try listsize of 0 which suppresses printing.
+
+    set_listsize 0
+    gdb_test "list 1" "" "listsize of 0 suppresses output"
+
+    # Try listsize of -1 which is special, and means unlimited.
+
+    set_listsize -1
+    setup_xfail "*-*-*"
+    gdb_test "list 1" "1\[ \t\]+#include .*\r\n39\[ \t\]+\}" "list line 1 with unlimited listsize"
+}
+
+#
+# Test "list filename:number" for C include file
+#
+
+proc test_list_include_file {} {
+    global gdb_prompt
+
+    setup_xfail "a29k-*-udi"
+    setup_xfail_format "DWARF 1"
+    setup_xfail_format "COFF"
+    gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*5\[ \t\]+foo \[(\]+x\[)\]+" "list line 1 in include file"
+
+    setup_xfail "a29k-*-udi"
+    setup_xfail_format "DWARF 1"
+    setup_xfail_format "COFF"
+    gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 36 lines." "list message for lines past EOF"
+}
+
+#
+# Test "list filename:number" for C source file
+#
+
+proc test_list_filename_and_number {} {
+    global gdb_prompt
+
+    set testcnt 0
+
+    send_gdb "list list0.c:1\n"
+    gdb_expect {
+	-re "1\[ \t\]+#include \"list0.h\".*5\[ \t\]+int x;\r\n$gdb_prompt $" {
+	    incr testcnt 
+	}
+	-re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests }
+	timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests }
+    }
+    send_gdb "list list0.c:10\n"
+    gdb_expect {
+	-re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt 
+	}
+	-re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests }
+	timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests }
+    }
+    send_gdb "list list1.c:1\n"
+    gdb_expect {
+	-re "1\[ \t\]+void.*5\[ \t\]+printf \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt 
+	}
+	-re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests }
+	timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests }
+    }
+    send_gdb "list list1.c:12\n"
+    gdb_expect {
+	-re "7\[ \t\]+long_line \[(\]+.*\[)\]+;.*14\[ \t\]+\}\r\n.*$gdb_prompt $" {
+	    incr testcnt 
+	}
+	-re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests }
+	timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests }
+    }
+    pass "list filename:number ($testcnt tests)"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Test "list function" for C source file
+#
+
+proc test_list_function {} {
+    global gdb_prompt
+    global gcc_compiled
+
+    # gcc appears to generate incorrect debugging information for code
+    # in include files, which breaks this test.
+    # SunPRO cc is the second case below, it's also correct.
+    setup_xfail "a29k-*-udi"
+    gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*8\[ \t\]+breakpoint\[(\]\[)\]+;)" "list function in source file 1"
+
+    # Ultrix gdb takes the second case below; it's also correct.
+    # SunPRO cc is the third case.
+    gdb_test "list bar" "(1\[ \t\]+void.*7\[ \t\]*long_line ..;.*9\[ \t\]*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;)" "list function in source file 2"
+
+    # Test "list function" for C include file
+    # Ultrix gdb is the second case, still correct.
+    # SunPRO cc is the third case.
+    setup_xfail "powerpc-*-*"
+    setup_xfail_format "DWARF 1"
+    gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file"
+}
+
+proc test_list_forward {} {
+    global gdb_prompt
+
+    set testcnt 0
+
+    send_gdb "list list0.c:10\n"
+    gdb_expect {
+	-re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
+	timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list\n"
+    gdb_expect {
+	-re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
+	timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list\n"
+    gdb_expect {
+	-re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
+	timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list\n"
+    gdb_expect {
+	-re "35\[ \t\]+foo \[(\]+.*\[)\]+;.*42\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
+	timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
+    }
+
+    pass "successive list commands to page forward ($testcnt tests)"
+    gdb_stop_suppressing_tests;
+}
+
+proc test_list_backwards {} {
+    global gdb_prompt
+
+    set testcnt 0
+
+    send_gdb "list list0.c:33\n"
+    gdb_expect {
+	-re "28\[ \t\]+foo \[(\]+.*\[)\]+;.*37\[ \t\]+\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests }
+	timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list -\n"
+    gdb_expect {
+	-re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests }
+	timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list -\n"
+    gdb_expect {
+	-re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests }
+	timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests }
+    }
+
+    send_gdb "list -\n"
+    gdb_expect {
+	-re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
+	-re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests }
+	timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests }
+    }
+
+    pass "$testcnt successive \"list -\" commands to page backwards"
+    gdb_stop_suppressing_tests;
+}
+
+#
+# Test "list first,last"
+#
+
+proc test_list_range {} {
+    global gdb_prompt
+
+    gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2"
+
+    gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2"
+
+#    gdb_test     "list -1,6" 	"Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative"
+
+#    gdb_test     "list -100,-40" 	"Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative"
+
+    gdb_test "list 30,43" "30\[ \t\]+foo \[(\]+.*\[)\]+;.*42\[ \t\]+\}" "list range; upper bound past EOF"
+
+    gdb_test "list 43,100" "Line number 43 out of range; .*list0.c has 42 lines." "list range; both bounds past EOF"
+
+    gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files"
+}
+
+#
+# Test "list filename:function"
+#
+
+proc test_list_filename_and_function {} {
+    global gdb_prompt
+
+    set testcnt 0
+
+    # gcc appears to generate incorrect debugging information for code
+    # in include files, which breaks this test.
+    # SunPRO cc is the second case below, it's also correct.
+    setup_xfail "a29k-*-udi"
+    send_gdb "list list0.c:main\n"
+    gdb_expect {
+	-re "1\[ \t\]+#include .*8\[ \t\]+breakpoint\[(\]\[)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
+	    pass "list function in source file 1"
+	}
+	-re ".*$gdb_prompt $" { fail "list list0.c:main" }
+	timeout { fail "list list0.c:main (timeout)" }
+    }
+
+    # The i960 and a29k-amd-udi are the second case
+
+    # Not sure what the point of having this function be unused is.
+    # AIX is legitimately removing it.
+    setup_xfail "rs6000-*-aix*"
+    send_gdb "list list0.c:unused\n"
+    gdb_expect {
+	-re "36\[ \t\]+\}.*42\[ \t\]+\}\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re ".*$gdb_prompt $" { fail "list list0.c:unused" }
+	timeout { fail "list list0.c:unused (timeout)" }
+    }
+    clear_xfail "rs6000-*-aix*"
+
+    # gcc appears to generate incorrect debugging information for code
+    # in include files, which breaks this test.
+    # Ultrix gdb is the second case, one line different but still correct.
+    # SunPRO cc is the third case.
+    setup_xfail "rs6000-*-*" 1804
+    setup_xfail "powerpc-*-*" 1804
+    setup_xfail "a29k-*-udi"
+    setup_xfail_format "DWARF 1"
+    setup_xfail_format "COFF"
+    send_gdb "list list0.h:foo\n"
+    gdb_expect {
+	-re "2\[ \t\]+including file.  This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "No source file named list0.h.\r\n$gdb_prompt $" {
+	    fail "list list0.h:foo"
+	}
+	-re ".*$gdb_prompt $" { fail "list list0.h:foo" }
+	timeout { fail "list list0.h:foo (timeout)" }
+    }
+
+    # Ultrix gdb is the second case.
+    # a29k-amd-udi is the third case.
+    send_gdb "list list1.c:bar\n"
+    gdb_expect {
+	-re "1\[ \t\]+void.*8\[ \t\]+\}\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "1\[ \t\]+void.*7\[ \t\]*long_line ..;\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "1\[ \t\]+void.*9\[ \t\]*\r\n$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re ".*$gdb_prompt $" { fail "list list1.c:bar" }
+	timeout { fail "list list1.c:bar (timeout)" }
+    }
+
+    # The i960 and a29k-amd-udi are the second case
+
+    # Not sure what the point of having this function be unused is.
+    # AIX is legitimately removing it.
+    setup_xfail "rs6000-*-aix*"
+    send_gdb "list list1.c:unused\n"
+    gdb_expect {
+	-re "7\[ \t\]+long_line \[(\]\[)\];.*14\[ \t\]+\}\r\n.*$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re "9.*14\[ \t\]+\}\r\n.*$gdb_prompt $" {
+	    incr testcnt
+	}
+	-re ".*$gdb_prompt $" { fail "list list1.c:unused" }
+	timeout { fail "list list1.c:unused (timeout)" }
+    }
+    clear_xfail "rs6000-*-aix*"
+
+    pass "list filename:function ($testcnt tests)"
+
+    # Test some invalid specs
+    # The following test takes the FIXME result on most systems using
+    # DWARF.  It fails to notice that main() is not in the file requested.
+   
+    setup_xfail "*-*-*"
+
+# Does this actually work ANYWHERE?  I believe not, as this is an `aspect' of
+# lookup_symbol(), where, when it is given a specific symtab which does not
+# contain the requested symbol, it will subsequently search all of the symtabs
+# for the requested symbol.
+
+    gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected"
+
+    gdb_test "list foobar.c:main" "No source file named foobar.c." "list filename:function; nonexistant file"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "list list0.h:foobar" "Function \"foobar\" not defined." "list filename:function; nonexistant function"
+
+}
+
+proc test_forward_search {} {
+	global timeout
+
+	gdb_test "set listsize 4" ""
+	# On SunOS4, this gives us lines 19-22.  On AIX, it gives us
+	# lines 20-23.  This depends on whether the line number of a function
+	# is considered to be the openbrace or the first statement--either one
+	# is acceptable.
+	gdb_test "list long_line" "20\[ \t\]+long_line .*"
+
+	gdb_test "search 4321" " not found"
+
+	gdb_test "search 6789" "24\[ \t\]+oof .6789.;"
+
+	# Test that GDB won't crash if the line being searched is extremely long.
+
+	set oldtimeout $timeout
+	set timeout [expr "$timeout + 300"]
+	verbose "Timeout is now $timeout seconds" 2
+	gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)"
+	set timeout $oldtimeout
+	verbose "Timeout is now $timeout seconds" 2
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+
+gdb_test "set width 0" "" "set width 0"
+
+test_listsize
+get_debug_format
+if [ set_listsize 10 ] then {
+    test_list_include_file
+    test_list_filename_and_number
+    test_list_function
+    test_list_forward
+    test_list_backwards
+    test_list_range
+    test_list_filename_and_function
+    test_forward_search
+}
diff --git a/gdb/testsuite/gdb.base/list0.c b/gdb/testsuite/gdb.base/list0.c
new file mode 100644
index 0000000..a5561a7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/list0.c
@@ -0,0 +1,42 @@
+#include "list0.h"
+
+main ()
+{
+    int x;
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    x = 0;
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+}
+
+static void
+unused ()
+{
+    /* Not used for anything */
+}
diff --git a/gdb/testsuite/gdb.base/list0.h b/gdb/testsuite/gdb.base/list0.h
new file mode 100644
index 0000000..c4d337c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/list0.h
@@ -0,0 +1,36 @@
+/* An include file that actually causes code to be generated in the
+   including file.  This is known to cause problems on some systems. */
+
+static void
+foo (x)
+int x;
+{
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+}
diff --git a/gdb/testsuite/gdb.base/list1.c b/gdb/testsuite/gdb.base/list1.c
new file mode 100644
index 0000000..51632b9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/list1.c
@@ -0,0 +1,33 @@
+void
+bar (x)
+int x;
+{
+    printf ("%d\n", x);
+
+    long_line ();
+}
+
+static void
+unused ()
+{
+    /* Not used for anything */
+}
+
+
+/* This routine has a very long line that will break searching in older
+   versions of GDB.  */
+
+long_line ()
+{
+  oof (67);
+
+  oof (6789);
+
+  oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*  5 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 10 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 15 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 20 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 25 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 30 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 35 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 40 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 45 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 50 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 55 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 60 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 65 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (1234); /* 70 */
+}
+
+oof (n)
+     int n;
+{
+  return n + 1;
+}
diff --git a/gdb/testsuite/gdb.base/logical.exp b/gdb/testsuite/gdb.base/logical.exp
new file mode 100644
index 0000000..0458e61
--- /dev/null
+++ b/gdb/testsuite/gdb.base/logical.exp
@@ -0,0 +1,575 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+
+#
+# tests for correctenss of logical operators, associativity and precedence
+# with integer type variables
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#
+# test expressions with "int" types
+#
+
+gdb_test "set variable x=0" "" "set variable x=0"
+gdb_test "set variable y=0" "" "set variable y=0"
+gdb_test "set variable z=0" "" "set variable z=0"
+
+send_gdb "print x\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x" }
+    timeout           { fail "(timeout) print value of x" }    
+  }
+
+
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of y" }
+    timeout           { fail "(timeout) print value of y" }    
+  }
+
+send_gdb "print z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of z" }
+    timeout           { fail "(timeout) print value of z" }    
+  }
+
+
+# truth tables for && , || , !  
+
+send_gdb "print x && y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y" }
+    timeout           { fail "(timeout) print value of x<y" }    
+  }
+
+
+
+send_gdb "print x || y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y" }
+    timeout           { fail "(timeout) print value of x<=y" }    
+  }
+
+send_gdb "print !x\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x>y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y" }
+    timeout           { fail "(timeout) print value of x>y" }    
+  }
+
+gdb_test "set variable y=1" "" "set variable y=1"
+
+send_gdb "print x && y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y" }
+    timeout           { fail "(timeout) print value of x<y" }    
+  }
+
+
+
+send_gdb "print x || y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y" }
+    timeout           { fail "(timeout) print value of x<=y" }    
+  }
+
+gdb_test "set variable x=1" "" "set variable x=1"
+
+send_gdb "print x && y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y" }
+    timeout           { fail "(timeout) print value of x<y" }    
+  }
+
+
+
+send_gdb "print x || y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y" }
+    timeout           { fail "(timeout) print value of x<=y" }    
+  }
+
+send_gdb "print !x\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x>y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y" }
+    timeout           { fail "(timeout) print value of x>y" }    
+  }
+
+gdb_test "set variable y=0" "" "set variable y=0"
+
+send_gdb "print x && y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y" }
+    timeout           { fail "(timeout) print value of x<y" }    
+  }
+
+
+
+send_gdb "print x || y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y" }
+    timeout           { fail "(timeout) print value of x<=y" }    
+  }
+
+
+# end truth tables for &&, ||, !
+
+
+# test associativity of && , || , !
+
+gdb_test "set variable x=0" "" "set variable x=0"
+gdb_test "set variable y=0" "" "set variable y=0"
+gdb_test "set variable z=0" "" "set variable z=0"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (000)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (000) " }
+    timeout           { fail "(timeout) print value of x && y && z (000) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x || y || z (000)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (000)" }
+    timeout           { fail "(timeout) print value of x || y || z (000) " }    
+  }
+
+send_gdb "print !!x\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of !!x (0)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !!x (0)" }
+    timeout           { fail "(timeout) print value of !!x (0) " }    
+  }
+
+
+gdb_test "set variable y=1" "" "set variable y=1"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (010)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (010) " }
+    timeout           { fail "(timeout) print value of x && y && z (010) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (010)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (010)" }
+    timeout           { fail "(timeout) print value of x || y || z (010) " }    
+  }
+
+
+gdb_test "set variable z=1" "" "set variable z=1"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (011)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (011) " }
+    timeout           { fail "(timeout) print value of x && y && z (011) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (011)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (011)" }
+    timeout           { fail "(timeout) print value of x || y || z (011) " }    
+  }
+
+
+gdb_test "set variable x=1" "" "set variable x=1"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (111)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (111) " }
+    timeout           { fail "(timeout) print value of x && y && z (111) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (111)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (111)" }
+    timeout           { fail "(timeout) print value of x || y || z (111) " }    
+  }
+
+send_gdb "print !!x\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of !!x (1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !!x (1)" }
+    timeout           { fail "(timeout) print value of !!x (1) " }    
+  }
+
+
+gdb_test "set variable z=0" "" "set variable z=0"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (110)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (110) " }
+    timeout           { fail "(timeout) print value of x && y && z (110) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (110)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (110)" }
+    timeout           { fail "(timeout) print value of x || y || z (110) " }    
+  }
+
+
+
+
+gdb_test "set variable y=0" "" "set variable y=0"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (100)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (100) " }
+    timeout           { fail "(timeout) print value of x && y && z (100) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (100)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (100)" }
+    timeout           { fail "(timeout) print value of x || y || z (100) " }    
+  }
+
+
+
+
+gdb_test "set variable z=1" "" "set variable z=1"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (101)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (101) " }
+    timeout           { fail "(timeout) print value of x && y && z (101) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (101)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (101)" }
+    timeout           { fail "(timeout) print value of x || y || z (101) " }    
+  }
+
+
+gdb_test "set variable x=0" "" "set variable x=0"
+
+send_gdb "print x && y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x &&  y && z (001)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x && y && z (001) " }
+    timeout           { fail "(timeout) print value of x && y && z (001) " }    
+  }
+
+send_gdb "print x || y || z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y || z (001)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x || y || z (001)" }
+    timeout           { fail "(timeout) print value of x || y || z (001) " }    
+  }
+
+
+
+
+# test precedence of &&, || ,! 
+
+
+send_gdb "print !x && y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of !x && y  (00)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  !x && y (00)" }
+    timeout           { fail "(timeout) print value of !x && y (00) " }    
+  }
+
+
+gdb_test "set variable x=1" "" "set variable x=1"
+
+
+send_gdb "print !x && y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of !x && y  (10)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  !x && y (10)" }
+    timeout           { fail "(timeout) print value of !x && y (10) " }    
+  }
+
+
+
+
+gdb_test "set variable y=1" "" "set variable y=1"
+
+send_gdb "print !x || y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of !x || y  (11)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  !x || y (11)" }
+    timeout           { fail "(timeout) print value of !x || y (11) " }    
+  }
+
+
+gdb_test "set variable x=0" "" "set variable x=0"
+
+
+send_gdb "print !x || y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of !x || y  (01)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  !x || y (01)" }
+    timeout           { fail "(timeout) print value of !x || y (01) " }    
+  }
+
+
+
+gdb_test "set variable x=1" "" "set variable x=1"
+gdb_test "set variable z=0" "" "set variable z=0"
+
+send_gdb "print x || y && z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y && z  (110)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  x || y && z (110)" }
+    timeout           { fail "(timeout) print value of x || y && z (110) " }    
+  }
+
+
+gdb_test "set variable y=0" "" "set variable y=0"
+
+
+send_gdb "print x || y && z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x || y && z (100)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  x || y && z (100)" }
+    timeout           { fail "(timeout) print value of x || y && z (100) " }    
+  }
+
+
+
+gdb_test "set variable x=0" "" "set variable x=0"
+
+send_gdb "print x || !y && z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        
+         gdb_test "set variable x=1" "" "set variable x=1"
+         send_gdb "print x || !y && z\n"
+         gdb_expect {
+             -re ".*1.*$gdb_prompt $" {
+                  pass "print value of x || !y && z "
+             }
+             -re ".*$gdb_prompt $" { fail "print value of  x || !y && z" }
+             timeout           { fail "(timeout) print value of x || !y && z " }    
+           }
+    }       
+    -re ".*$gdb_prompt $" { fail "print value of  x || y && z " }
+    timeout           { fail "(timeout) print value of x || y && z " }    
+ }
+
+
+
+
+
+gdb_test "set variable x=1" "" "set variable x=1"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable w=3" "" "set variable w=3"
+gdb_test "set variable z=3" "" "set variable z=3"
+
+
+send_gdb "print x > y || w == z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x > y || w == z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  x > y || w == z" }
+    timeout           { fail "(timeout) print value of x > y || w == z " }    
+  }
+
+
+gdb_test "set variable x=1" "" "set variable x=1"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable w=1" "" "set variable w=1"
+gdb_test "set variable z=3" "" "set variable z=3"
+
+
+send_gdb "print x >= y && w != z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x >= y || w != z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  x >= y || w != z" }
+    timeout           { fail "(timeout) print value of x >= y || w != z " }    
+  }
+
+
+
+gdb_test "set variable x=2" "" "set variable x=2"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable w=2" "" "set variable w=2"
+gdb_test "set variable z=3" "" "set variable z=3"
+
+
+send_gdb "print ! x > y || w + z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x > y || w != z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of  x > y || w != z" }
+    timeout           { fail "(timeout) print value of x > y || w != z " }    
+  }
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/long_long.c b/gdb/testsuite/gdb.base/long_long.c
new file mode 100644
index 0000000..096528d
--- /dev/null
+++ b/gdb/testsuite/gdb.base/long_long.c
@@ -0,0 +1,55 @@
+/* Test long long expression; test printing in general.
+ *
+ * /CLO/BUILD_ENV/Exports/cc -g +e -o long_long long_long.c
+ *
+ * or
+ *
+ * cc +e +DA2.0 -g -o long_long long_long.c
+ */
+
+long long callee( i )
+long long i;
+{
+   register long long result;
+
+   result  = 0x12345678;
+   result  = result << i;
+   result += 0x9abcdef0;
+
+   return result;
+}
+
+int known_types()
+{
+   long long bin = 0, oct = 0, dec = 0, hex = 0;
+
+   /* Known values, filling the full 64 bits.
+    */
+   bin = 0x123456789abcdefLL; /* 64 bits = 16 hex digits */
+   oct = 01234567123456701234567LL; /*  = 21+ octal digits */
+   dec = 12345678901234567890LL;    /*  = 19+ decimal digits */
+
+   /* Stop here and look!
+    */
+   hex = bin - dec | oct;
+}
+
+int main() {
+
+   register long long x, y;
+   register long long i;
+   
+   x = (long long) 0xfedcba9876543210LL;
+   y = x++;
+   x +=y;
+   i = 11;
+   x = callee( i );
+   y += x;
+
+   known_types();
+   
+   return 0;
+}
+
+
+
diff --git a/gdb/testsuite/gdb.base/long_long.exp b/gdb/testsuite/gdb.base/long_long.exp
new file mode 100644
index 0000000..aca59c2
--- /dev/null
+++ b/gdb/testsuite/gdb.base/long_long.exp
@@ -0,0 +1,163 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+# long_long.exp   Test printing of 64-bit things in 32-bit gdb.
+#                 Also test differnet kinds of formats.
+#
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile long_long
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# What compiler are we using?
+#
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	### FIXME +e only works with HP's compiler
+	set additional_flags "additional_flags=+e -w"
+    } else {
+	# don't know what the compiler is, hope it supports long long!
+	set additional_flags "additional_flags=-w"
+    }
+} else {
+    set additional_flags "additional_flags=-w"
+}
+
+if  { [gdb_compile "${srcfile}" "${binfile}" executable [list debug $additional_flags]] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# use this to debug:
+#log_user 1
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if { ![runto known_types] } then { 
+   fail "run to known_types" 
+   return 
+}
+
+gdb_test "n 4"   ".*34.*" "get to known place"
+
+# Check the hack for long long prints.
+#
+gdb_test "p/x hex" ".*0x0.*" "default print hex"
+gdb_test "p/x dec" ".*0xab54a98ceb1f0ad2.*" "default print dec"
+gdb_test "p/x bin" ".*0x123456789abcdef.*" "default print bin"
+gdb_test "p/x oct" ".*0xa72ee53977053977.*" "default print oct"
+
+gdb_test "p/x hex" ".*0x0.*" "hex print"
+gdb_test "p/u dec" ".*12345678901234567890.*" "decimal print"
+gdb_test "p/t bin" ".*100100011010001010110011110001001101010111100110111101111.*" "binary print"
+gdb_test "p/o oct" ".*01234567123456701234567.*" "octal print"
+
+# Try all the combinations to bump up coverage.
+#
+gdb_test "p/d oct" ".*12046818088235383159.*" ""
+gdb_test "p/u oct" ".*0xa72ee53977053977.*" ""
+gdb_test "p/o oct" ".*.*" ""
+gdb_test "p/t oct" ".*1010011100101110111001010011100101110111000001010011100101110111.*" ""
+gdb_test "p/a oct" ".*That operation is not available.*" ""
+gdb_test "p/c oct" ".*0xa72ee53977053977.*" ""
+gdb_test "p/f oct" ".*-5.9822653797615723e-120.*" ""
+
+gdb_test "p/d *(int *)&oct" ".*-1490098887.*" ""
+gdb_test "p/u *(int *)&oct" ".*2804868409.*" ""
+gdb_test "p/o *(int *)&oct" ".*024713562471.*" ""
+gdb_test "p/t *(int *)&oct" ".*10100111001011101110010100111001.*" ""
+gdb_test "p/a *(int *)&oct" ".*0xa72ee539.*" ""
+gdb_test "p/c *(int *)&oct" ".*57 '9'.*" ""
+gdb_test "p/f *(int *)&oct" ".*-2.42716126e-15.*" ""
+
+gdb_test "p/d *(short *)&oct" ".*-22738.*" ""
+gdb_test "p/u *(short *)&oct" ".*42798.*" ""
+gdb_test "p/o *(short *)&oct" ".*0123456.*" ""
+gdb_test "p/t *(short *)&oct" ".*1010011100101110.*" ""
+gdb_test "p/a *(short *)&oct" ".*0xffffa72e.*" ""
+gdb_test "p/c *(short *)&oct" ".* 46 '.'.*" ""
+gdb_test "p/a **short *)&oct" ".*0xffffa72e <.*" ""
+gdb_test "p/f *(short *)&oct" ".*-22738.*" ""
+
+gdb_test "x/x &oct" ".*0xa72ee539.*" ""
+gdb_test "x/d &oct" ".*.-1490098887*" ""
+gdb_test "x/u &oct" ".*2804868409.*" ""
+gdb_test "x/o &oct" ".*024713562471.*" ""
+gdb_test "x/t &oct" ".*10100111001011101110010100111001.*" ""
+gdb_test "x/a &oct" ".*0xa72ee539 <.*" ""
+gdb_test "x/c &oct" ".*-89 'M-''.*" ""
+gdb_test "x/f &oct" ".*-5.9822653797615723e-120.*" ""
+
+gdb_test "x/2x &oct" ".*.*" ""
+gdb_test "x/2d &oct" ".*.*" ""
+gdb_test "x/2u &oct" ".*.*" ""
+gdb_test "x/2o &oct" ".*.*" ""
+gdb_test "x/2t &oct" ".*.*" ""
+gdb_test "x/2a &oct" ".*.*" ""
+gdb_test "x/2c &oct" ".*.*" ""
+gdb_test "x/2f &oct" ".*.*" ""
+
+gdb_test "x/2bx &oct" ".*.*" ""
+gdb_test "x/2bd &oct" ".*.*" ""
+gdb_test "x/2bu &oct" ".*.*" ""
+gdb_test "x/2bo &oct" ".*.*" ""
+gdb_test "x/2bt &oct" ".*.*" ""
+gdb_test "x/2ba &oct" ".*.*" ""
+gdb_test "x/2bc &oct" ".*.*" ""
+gdb_test "x/2bf &oct" ".*.*" ""
+
+gdb_test "x/2hx &oct" ".*.*" ""
+gdb_test "x/2hd &oct" ".*.*" ""
+gdb_test "x/2hu &oct" ".*.*" ""
+gdb_test "x/2ho &oct" ".*.*" ""
+gdb_test "x/2ht &oct" ".*.*" ""
+gdb_test "x/2ha &oct" ".*.*" ""
+gdb_test "x/2hc &oct" ".*.*" ""
+gdb_test "x/2hf &oct" ".*.*" ""
+
+gdb_test "x/2wx &oct" ".*.*" ""
+gdb_test "x/2wd &oct" ".*.*" ""
+gdb_test "x/2wu &oct" ".*.*" ""
+gdb_test "x/2wo &oct" ".*.*" ""
+gdb_test "x/2wt &oct" ".*.*" ""
+gdb_test "x/2wa &oct" ".*.*" ""
+gdb_test "x/2wc &oct" ".*.*" ""
+gdb_test "x/2wf &oct" ".*.*" ""
+
+gdb_test "x/2gx &oct" ".*.*" ""
+gdb_test "x/2gd &oct" ".*.*" ""
+gdb_test "x/2gu &oct" ".*.*" ""
+gdb_test "x/2go &oct" ".*.*" ""
+gdb_test "x/2gt &oct" ".*.*" ""
+gdb_test "x/2ga &oct" ".*.*" ""
+gdb_test "x/2gc &oct" ".*.*" ""
+gdb_test "x/2gf &oct" ".*.*" ""
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/m32r.ld b/gdb/testsuite/gdb.base/m32r.ld
new file mode 100644
index 0000000..b96077a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/m32r.ld
@@ -0,0 +1,160 @@
+OUTPUT_FORMAT("elf32-m32r", "elf32-m32r",
+	      "elf32-m32r")
+OUTPUT_ARCH(m32r)
+ENTRY(_start)
+ SEARCH_DIR(/usr/cygnus/m32r-961018/H-sparc-sun-sunos4.1//lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+     OVERLAY 0x300000 : AT (0x400000)
+        {
+          .ovly0 { foo.o(.text) }
+          .ovly1 { bar.o(.text) }
+        }
+     OVERLAY 0x380000 : AT (0x480000)
+        {
+          .ovly2 { baz.o(.text) }
+          .ovly3 { grbx.o(.text) }
+        }
+     OVERLAY 0x340000 : AT (0x440000)
+        {
+          .data00 { foo.o(.data) }
+          .data01 { bar.o(.data) }
+        }
+     OVERLAY 0x3C0000 : AT (0x4C0000)
+        {
+          .data02 { baz.o(.data) }
+          .data03 { grbx.o(.data) }
+        }
+
+  /* Read-only sections, merged into text segment: */
+  . = 0x208000;
+  .interp        : { *(.interp) 	}
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.init      : { *(.rel.init)	}
+  .rela.init     : { *(.rela.init)	}
+  .rel.fini      : { *(.rel.fini)	}
+  .rela.fini     : { *(.rela.fini)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		} =0
+  .plt           : { *(.plt)		}
+  .text          :
+  {
+    *(.text)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+  } =0
+  _etext = .;
+  PROVIDE (etext = .);
+  .fini          : { *(.fini)		} =0
+  .rodata        : { *(.rodata) *(.gnu.linkonce.r*) }
+  .rodata1       : { *(.rodata1)	}
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  . = ALIGN(32) + (ALIGN(8) & (32 - 1));
+  .data          :
+  {
+    *(.data)
+    *(.gnu.linkonce.d*)
+    _ovly_table = .; 
+      _ovly0_entry = .;
+	LONG(ABSOLUTE(ADDR(.ovly0)));
+	LONG(SIZEOF(.ovly0));
+	LONG(LOADADDR(.ovly0));
+	LONG(0);
+      _ovly1_entry = .;
+	LONG(ABSOLUTE(ADDR(.ovly1)));
+	LONG(SIZEOF(.ovly1));
+	LONG(LOADADDR(.ovly1));
+	LONG(0);
+      _ovly2_entry = .;
+	LONG(ABSOLUTE(ADDR(.ovly2)));
+	LONG(SIZEOF(.ovly2));
+	LONG(LOADADDR(.ovly2));
+	LONG(0);
+      _ovly3_entry = .;
+	LONG(ABSOLUTE(ADDR(.ovly3)));
+	LONG(SIZEOF(.ovly3));
+	LONG(LOADADDR(.ovly3));
+	LONG(0);
+      _data00_entry = .;
+	LONG(ABSOLUTE(ADDR(.data00)));
+	LONG(SIZEOF(.data00));
+	LONG(LOADADDR(.data00));
+	LONG(0);
+      _data01_entry = .;
+	LONG(ABSOLUTE(ADDR(.data01)));
+	LONG(SIZEOF(.data01));
+	LONG(LOADADDR(.data01));
+	LONG(0);
+      _data02_entry = .;
+	LONG(ABSOLUTE(ADDR(.data02)));
+	LONG(SIZEOF(.data02));
+	LONG(LOADADDR(.data02));
+	LONG(0);
+      _data03_entry = .;
+	LONG(ABSOLUTE(ADDR(.data03)));
+	LONG(SIZEOF(.data03));
+	LONG(LOADADDR(.data03));
+	LONG(0);
+    _novlys = .;
+	LONG((_novlys - _ovly_table) / 16);
+
+    CONSTRUCTORS
+  }
+  .data1         : { *(.data1)		}
+  .ctors         : { *(.ctors)		}
+  .dtors         : { *(.dtors)		}
+  .got           : { *(.got.plt) *(.got)}
+  .dynamic       : { *(.dynamic)	}
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata         : { *(.sdata)		}
+  _edata  =  .;
+  PROVIDE (edata = .);
+  __bss_start = .;
+  .sbss          : { *(.sbss) *(.scommon) }
+  .bss           : { *(.dynbss) *(.bss) *(COMMON) }
+  _end = . ;
+  PROVIDE (end = .);
+  /* Stabs debugging sections.  */
+  .stab 0        : { *(.stab)		}
+  .stabstr 0     : { *(.stabstr)	}
+  .stab.excl 0   : { *(.stab.excl)	}
+  .stab.exclstr 0 : { *(.stab.exclstr)	}
+  .stab.index 0  : { *(.stab.index)	}
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0     : { *(.comment)	}
+  /* DWARF debug sections.
+     Symbols in the .debug DWARF section are relative to the beginning of the
+     section so we begin .debug at 0.  It's not clear yet what needs to happen
+     for the others.   */
+  .debug          0 : { *(.debug) 	  }
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+  .line           0 : { *(.line)	  }
+  .stack   0x5ffffc : { _stack = .; *(.stack) }
+  /* These must appear regardless of  .  */
+}
diff --git a/gdb/testsuite/gdb.base/m32rovly.c b/gdb/testsuite/gdb.base/m32rovly.c
new file mode 100644
index 0000000..bdb90fe
--- /dev/null
+++ b/gdb/testsuite/gdb.base/m32rovly.c
@@ -0,0 +1,225 @@
+
+/*
+ * Ovlymgr.c -- Runtime Overlay Manager for the GDB testsuite.
+ */
+
+#include "ovlymgr.h"
+
+/* Local functions and data: */
+
+extern unsigned long _ovly_table[][4];
+extern unsigned long _novlys __attribute__ ((section (".data")));
+enum ovly_index { VMA, SIZE, LMA, MAPPED};
+
+static void ovly_copy (unsigned long dst, unsigned long src, long size);
+
+/* Flush the data and instruction caches at address START for SIZE bytes.
+   Support for each new port must be added here.  */
+/* FIXME: Might be better to have a standard libgloss function that
+   ports provide that we can then use.  Use libgloss instead of newlib
+   since libgloss is the one intended to handle low level system issues.
+   I would suggest something like _flush_cache to avoid the user's namespace
+   but not be completely obscure as other things may need this facility.  */
+ 
+static void
+FlushCache (void)
+{
+#ifdef __M32R__
+  volatile char *mspr = (char *) 0xfffffff7;
+  *mspr = 1;
+#endif
+}
+
+/* OverlayLoad:
+ * Copy the overlay into its runtime region,
+ * and mark the overlay as "mapped".
+ */
+
+bool
+OverlayLoad (unsigned long ovlyno)
+{
+  unsigned long i;
+
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);	/* fail, bad ovly number */
+
+  if (_ovly_table[ovlyno][MAPPED])
+    return TRUE;	/* this overlay already mapped -- nothing to do! */
+
+  for (i = 0; i < _novlys; i++)
+    if (i == ovlyno)
+      _ovly_table[i][MAPPED] = 1;	/* this one now mapped */
+    else if (_ovly_table[i][VMA] == _ovly_table[ovlyno][VMA])
+      _ovly_table[i][MAPPED] = 0;	/* this one now un-mapped */
+
+  ovly_copy (_ovly_table[ovlyno][VMA], 
+	     _ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][SIZE]);
+
+  FlushCache ();
+
+  return TRUE;
+}
+
+/* OverlayUnload:
+ * Copy the overlay back into its "load" region.
+ * Does NOT mark overlay as "unmapped", therefore may be called
+ * more than once for the same mapped overlay.
+ */
+ 
+bool
+OverlayUnload (unsigned long ovlyno)
+{
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);  /* fail, bad ovly number */
+ 
+  if (!_ovly_table[ovlyno][MAPPED])
+    exit (-1);  /* error, can't copy out a segment that's not "in" */
+ 
+  ovly_copy (_ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][VMA],
+	     _ovly_table[ovlyno][SIZE]);
+
+  return TRUE;
+}
+
+#ifdef __D10V__
+#define IMAP0       (*(short *)(0xff00))
+#define IMAP1       (*(short *)(0xff02))
+#define DMAP        (*(short *)(0xff04))
+
+static void
+D10VTranslate (unsigned long logical,
+	       short *dmap,
+	       unsigned long **addr)
+{
+  unsigned long physical;
+  unsigned long seg;
+  unsigned long off;
+
+  /* to access data, we use the following mapping 
+     0x00xxxxxx: Logical data address segment        (DMAP translated memory)
+     0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
+     0x10xxxxxx: Physical data memory segment        (On-chip data memory)
+     0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
+     0x12xxxxxx: Phisical unified memory segment     (Unified memory)
+     */
+
+  /* Addresses must be correctly aligned */
+  if (logical & (sizeof (**addr) - 1))
+    exit (-1);
+
+  /* If the address is in one of the two logical address spaces, it is
+     first translated into a physical address */
+  seg = (logical >> 24);
+  off = (logical & 0xffffffL);
+  switch (seg) 
+      {
+      case 0x00: /* in logical data address segment */
+	if (off <= 0x7fffL)
+	  physical = (0x10L << 24) + off;
+	else
+	  /* Logical address out side of on-chip segment, not
+             supported */
+	  exit (-1);
+	break;
+      case 0x01: /* in logical instruction address segment */
+	{
+	  short map;
+	  if (off <= 0x1ffffL)
+	    map = IMAP0;
+	  else if (off <= 0x3ffffL)
+	    map = IMAP1;
+	  else
+	    /* Logical address outside of IMAP[01] segment, not
+	       supported */
+	    exit (-1);
+	  if (map & 0x1000L)
+	    {
+	    /* Instruction memory */
+	      physical = (0x11L << 24) | off;
+	    }
+	  else
+	    {
+	    /* Unified memory */
+	      physical = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
+	      if (physical > 0xffffffL)
+		/* Address outside of unified address segment */
+		exit (-1);
+	      physical |= (0x12L << 24);
+	    }
+	  break;
+	}
+      case 0x10:
+      case 0x11:
+      case 0x12:
+	physical = logical;
+	break;
+      default:
+	exit (-1);	/* error */
+      }
+
+  seg = (physical >> 24);
+  off = (physical & 0xffffffL);
+  switch (seg) 
+    {
+    case 0x10:	/* dst is a 15 bit offset into the on-chip memory */
+      *dmap = 0;
+      *addr = (long *) (0x0000 + ((short)off & 0x7fff));
+      break;
+    case 0x11:	/* dst is an 18-bit offset into the on-chip
+		   instruction memory */
+      *dmap = 0x1000L | ((off & 0x3ffffL) >> 14);
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    case 0x12:	/* dst is a 24-bit offset into unified memory */
+      *dmap = off >> 14;
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    default:
+      exit (-1);	/* error */
+    }
+}
+#endif /* __D10V__ */
+
+static void
+ovly_copy (unsigned long dst, unsigned long src, long size)
+{
+#ifdef  __M32R__
+  memcpy ((void *) dst, (void *) src, size);
+  return;
+#endif /* M32R */
+
+#ifdef  __D10V__
+  unsigned long *s, *d, tmp;
+  short dmap_src, dmap_dst;
+  short dmap_save;
+
+  /* all section sizes should by multiples of 4 bytes */
+  dmap_save = DMAP;
+
+  D10VTranslate (src, &dmap_src, &s);
+  D10VTranslate (dst, &dmap_dst, &d);
+
+  while (size > 0)
+    {
+      /* NB: Transfer 4 byte (long) quantites, problems occure
+	 when only two bytes are transfered */
+      DMAP = dmap_src;
+      tmp = *s;
+      DMAP = dmap_dst;
+      *d = tmp; 
+      d++;
+      s++;
+      size -= sizeof (tmp);
+      src += sizeof (tmp);
+      dst += sizeof (tmp);
+      if ((src & 0x3fff) == 0)
+	D10VTranslate (src, &dmap_src, &s);
+      if ((dst & 0x3fff) == 0)
+	D10VTranslate (dst, &dmap_dst, &d);
+    }
+  DMAP = dmap_save;
+#endif /* D10V */
+}
+
diff --git a/gdb/testsuite/gdb.base/m68k-aout.u b/gdb/testsuite/gdb.base/m68k-aout.u
new file mode 100644
index 0000000..3095fc0
--- /dev/null
+++ b/gdb/testsuite/gdb.base/m68k-aout.u
@@ -0,0 +1,459 @@
+begin 777 m68k-aout
+M   !"P  $    !          #$@                                 
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M $Y6__!(USB 2^X !$GM  0F3$J<9ORYTV4"68PCS   $ 0O.0  $ 0O"R\5
+M8?\   %"WOP #"\ 8?\   -.6(],[CB __!.7DYU3E8  $Y>3G4  $@.    
+M $C7  !P &    ).7DYU2 X     2-<  '  8    DY>3G5(#@    !(UP  
+M< !@   "3EY.=4@.     $C7  !P &    ).7DYU2 X     2-<  '  8   
+M DY>3G5(#@    !(UP  < !@   "3EY.=4@.     $C7  !"@&    ).7DYU
+M2 X     2-<  $* 8    DY>3G5(#@    !(UP  0H!@   "3EY.=4@.    
+M $C7  !"@&    ).7DYU2 X     2-<  $* 8    DY>3G5(#@    !(UP  
+M0H!@   "3EY.=4@.     $C7  #R %P/8    DY>3G5(#@    !(UP  \@!<
+M#V    ).7DYU2 X     2-<  $(Y   0-!/\  $  ! V$_P  @  $#@S_  #
+M   0.C/\  0  ! \,_P !0  $#YP!B/    00' '(\   !!$< @CP   $$AP
+M"2/    03' *(\   !!0< LCP   $%0C_$+(     !!8(_Q :0     07"/\
+M        $& 3^0  $#0  !!D$_D  ! V   09A/Y   0.   $&@S^0  $#H 
+M !!L,_D  ! \   0<#/Y   0/@  $'0C^0  $$   !!\(_D  !!$   0A"/Y
+M   02   $(PC^0  $$P  !"4(_D  !!0   0G"/Y   05   $*0C^0  $%@ 
+M !"L(_D  !!<   0M"/Y   08   $+@C_   $#0  !#$(_P  ! V   0R"/\
+M   0.   $,PC_   $#H  !#0(_P  ! \   0U"/\   0/@  $-@C_   $$  
+M !#<(_P  !!$   0X"/\   02   $.0C_   $$P  !#H(_P  !!0   0["/\
+M   05   $/ C_   $%@  !#T(_P  !!<   0^' "(\   !'4< (CP   $=AP
+M 2/    1X' !(\   !'<(_D  !$\   11#/Y   1+   $31.7DYU0"@C*61B
+M>'AX+G,)-2XR("A"97)K96QE>2D@-R\Q,B\X-0  2'D  !'H('D  !'D3I!8
+MCTYR"HQ.5@  8?\    6+RX "&'_    %%B/3EY.=0  3E8  $Y>3G5.5@  
+M< %.0"/    3Y'#_3EY.=0                                      
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M     ! ,     $YU  ! *",I8W)T,"YC"30N-B H0F5R:V5L97DI(#,O,S O
+M.#,        !                                                
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M        ! 0  &0         "P0  )(   !4    $V0       !4    &X  
+M            /8              3X              <H              
+MC(              IX              Q8              WX          
+M    ^(             !"8             !'(             !*(      
+M       !,B    $        !/"    $        !32    $        !8"  
+M  (        !:R    (        !?2    (        !D2    0        !
+MFB    0        !JB    0        !O"    0        !QB    0     
+M   !UR    0        !ZB    0        !]2    @        " B    $ 
+M       "'2    $        "-2    $        "62    (        "=2  
+M  (        "CB    (        "LR    0        "S2    0        "
+MY"    0        #!R    0        #&"    0        #,"    0     
+M   #2B    0        #9B    @        #A"    $        #FB    $ 
+M       #M"    $        #TR    (        #ZB    (        $!2  
+M  (        $)2    0        $.B    0        $4R    0        $
+M<2    0        $A"    0        $GB    0        $NB    0     
+M   $T2    @        $ZH   !C___L%   %@R   !@        %D2   !@ 
+M       &*X    C___L%   &O"    @        &R"    @        '6B0 
+M  $   !4     $0  'D   !>   ':20   $   !H     $0  'H   !R   '
+M?R0   $   !\     $0  'L   "&   'ER0   (   "0     $0  'T   ":
+M   'IR0   (   "D     $0  'X   "N   'OB0   (   "X     $0  '\ 
+M  #"   'UR0   0   #,     $0  ($   #6   'Y20   0   #@     $0 
+M ((   #J   '^B0   0   #T     $0  (,   #^   ($20   0   $(    
+M $0  (4   $2   (("0   0   $<     $0  (8   $F   (-B0   0   $P
+M     $0  (<   $Z   (3B0   0   %$     $0  (D   %.   (7B0   @ 
+M  %:     $0  (H   %D   (<(   )C___L%   (W"   )@        (YX  
+M )#___L%   ))R   )         ),B    0        )5H    3___L%   )
+M?2    0        )C"    0        )JH    3___L%   )QB    0     
+M   )U(    3___L%   )\H    3___L%   *#H    3___L%   *&X    3_
+M__L%   *2"0   0   %P     $0  +(   %Z     $0  +,   %Z     $0 
+M +0   %Z     $0  +4   %Z     $0  +8   &      $0  +<   &(    
+M $0  +@   &0     $0  +D   &0     $0  +H   &8     $0  +L   &@
+M     $0  +P   &H     $0  +T   &H     $0  +X   &P     $0  +\ 
+M  &X     $0  ,    '      $0  ,$   '      $0  ,(   '(     $0 
+M ,,   '0     $0  ,0   '8     $0  ,4   '8     $0  ,8   'B    
+M $0  ,<   'V     $0  ,@   'V     $0  ,D   'V     $0  ,H   ( 
+M     $0  ,L   (*     $0  ,P   (4     $0  ,T   (4     $0  ,X 
+M  (>     $0  ,\   (H     $0  -    (R     $0  -$   (R     $0 
+M -(   (\     $0  -,   )&     $0  -0   )0     $0  -4   )0    
+M $0  -8   ):     $0  -<   )D     $0  -@   )N     $0  -D   )N
+M     $0  -H   )X     $0  -L   *,     $0  -P   *,     $0  -T 
+M  *6     $0  -X   *@     $0  -\   *J     $0  .    *J     $0 
+M .$   *T     $0  .(   *^     $0  .,   +(     $0  .0   +(    
+M $0  .4   +2     $0  .8   +<     $0  .<   +F     $0  .@   +F
+M     $0  .D   +P     $0  .H   +Z     $0  .L   ,$     $0  .P 
+M  ,$     $0  .T   ,.     $0  .X   ,8     $0  .\   ,8     $0 
+M /    ,@     $0  /$   ,H     $0  /(   ,P     $0  /,   ,X    
+M $0  /0   ,X     $0  /4   -"     $0  /8   -"     $0  /<   -,
+M   *4 0  /<   -0   *5 0       -0   *7 0       .(   *8P0 !N( 
+M  .D   *:P0  Y8   .L   *<P0 !N(   .T   *? < !7(  ! $   *A04 
+M!0X        *BP4  WX   %P   *D04  Z    .(   *EP4 !BX   !*   *
+MHP<  )(  ! (   *J@D !T8  ! T   *L@D !^X  ! V   *P0D !&8  ! X
+M   *T@D !YH  ! Z   *VPD  $P  ! \   *ZPD  =H  ! ^   *_0D !_  
+M !!    +! D "$0  !!$   +$@D !H   !!(   +(@D ![D  !!,   +*@D 
+M"&$  !!0   +.0D !-D  !!4   +2@D !L@  !!8   +4PD !6L  !!<   +
+M70D !W,  !!D   +:PD !ET  !!F   +@ D !&D  !!H   +EPD  ID  !!L
+M   +I@D  &T  !!P   +O D !2,  !!T   +U D !MT  !!\   +X0D  @, 
+M !"$   +]0D  0D  !",   ,"PD  ;L  !"4   ,&0D  *4  !"<   ,+@D 
+M!T\  !"D   ,10D  <T  !"L   ,5 D  +D  !"T   ,9 D "%(  !#$   ,
+M= D  _H  !#(   ,BPD !,@  !#,   ,I D !B8  !#0   ,M0D !A0  !#4
+M   ,S0D !ZP  !#8   ,YPD !?H  !#<   ,]@D  \X  !#@   -# D "(0 
+M !#D   -) D  JX  !#H   -- D !O0  !#L   -2PD !\(  !#P   -9 D 
+M O8  !#T   -=0D !T0  !#X   -APD !RL  !#\   -D@D !RP  !$4   -
+MG0D !\8  !$L   -I@D !R   !$T   -L 4  ZL   !4   -O04 !V\   !H
+M   -T04 !G4   !\   -YP4 !8T   "0   -]04 !'<   "D   ."@4  H, 
+M  "X   .(04 !Z\   #,   .+04  /,   #@   .0 4 !,4   #T   .504 
+M ,\   $(   .8@4 !),   $<   .=@4  YD   $P   .C 4 !2<   %$   .
+MF@4 !)T   %:   .J0D !T4  !$\   .L0D !X4  !%$   .N0D !\\  !'4
+M   .P@D  G<  !'8   .S@D !)X  !'<   .UPD  O@  !'@   .X@D  2< 
+M !'D   .ZP4  :D   -T   .] 4  ;0   .$   ._0< !,8  ! P   /!P4 
+M Y8   .D   /$04 !N(   .L   /& 4 "!P   .T   /'PD !Y<  !/D   /
+M)F-R=# N;P!G9&)M92YO &=D8FUE+F, :6YT.G0Q/7(Q.RTR,30W-#@S-C0X
+M.S(Q-#<T.#,V-#<[ &-H87(Z=#(]<C([,#LQ,C<[ &QO;F<Z=#,]<C$[+3(Q
+M-#<T.#,V-#@[,C$T-S0X,S8T-SL <VAO<G0Z=#0]<C$[+3,R-S8X.S,R-S8W
+M.P!U;G-I9VYE9"!C:&%R.G0U/7(Q.S [,C4U.P!U;G-I9VYE9"!S:&]R=#IT
+M-CUR,3LP.S8U-3,U.P!U;G-I9VYE9"!L;VYG.G0W/7(Q.S [+3$[ '5N<VEG
+M;F5D(&EN=#IT.#UR,3LP.RTQ.P!F;&]A=#IT.3UR,3LT.S [ &1O=6)L93IT
+M,3 ]<C$[.#LP.P!V;VED.G0Q,3TQ,0 _/S\Z=#$R/3$ =E]C:&%R.D<R '9?
+M<VEG;F5D7V-H87(Z1S( =E]U;G-I9VYE9%]C:&%R.D<U '9?<VAO<G0Z1S0 
+M=E]S:6=N961?<VAO<G0Z1S0 =E]U;G-I9VYE9%]S:&]R=#I'-@!V7VEN=#I'
+M,0!V7W-I9VYE9%]I;G0Z1S$ =E]U;G-I9VYE9%]I;G0Z1S@ =E]L;VYG.D<Q
+M '9?<VEG;F5D7VQO;F<Z1S$ =E]U;G-I9VYE9%]L;VYG.D<X '9?9FQO870Z
+M1SD =E]D;W5B;&4Z1S$P '9?8VAA<E]A<G)A>3I',3,]87(Q.S [,3LR '9?
+M<VEG;F5D7V-H87)?87)R87DZ1S$S '9?=6YS:6=N961?8VAA<E]A<G)A>3I'
+M,30]87(Q.S [,3LU '9?<VAO<G1?87)R87DZ1S$U/6%R,3LP.S$[- !V7W-I
+M9VYE9%]S:&]R=%]A<G)A>3I',34 =E]U;G-I9VYE9%]S:&]R=%]A<G)A>3I'
+M,38]87(Q.S [,3LV '9?:6YT7V%R<F%Y.D<Q-SUA<C$[,#LQ.S$ =E]S:6=N
+M961?:6YT7V%R<F%Y.D<Q-P!V7W5N<VEG;F5D7VEN=%]A<G)A>3I',3@]87(Q
+M.S [,3LX '9?;&]N9U]A<G)A>3I',3< =E]S:6=N961?;&]N9U]A<G)A>3I'
+M,3< =E]U;G-I9VYE9%]L;VYG7V%R<F%Y.D<Q. !V7V9L;V%T7V%R<F%Y.D<Q
+M.3UA<C$[,#LQ.SD =E]D;W5B;&5?87)R87DZ1S(P/6%R,3LP.S$[,3  =E]C
+M:&%R7W!O:6YT97(Z1S(Q/2HR '9?<VEG;F5D7V-H87)?<&]I;G1E<CI',C$ 
+M=E]U;G-I9VYE9%]C:&%R7W!O:6YT97(Z1S(R/2HU '9?<VAO<G1?<&]I;G1E
+M<CI',C,]*C0 =E]S:6=N961?<VAO<G1?<&]I;G1E<CI',C, =E]U;G-I9VYE
+M9%]S:&]R=%]P;VEN=&5R.D<R-#TJ-@!V7VEN=%]P;VEN=&5R.D<R-3TJ,0!V
+M7W-I9VYE9%]I;G1?<&]I;G1E<CI',C4 =E]U;G-I9VYE9%]I;G1?<&]I;G1E
+M<CI',C8]*C@ =E]L;VYG7W!O:6YT97(Z1S(U '9?<VEG;F5D7VQO;F=?<&]I
+M;G1E<CI',C4 =E]U;G-I9VYE9%]L;VYG7W!O:6YT97(Z1S(V '9?9FQO871?
+M<&]I;G1E<CI',C<]*CD =E]D;W5B;&5?<&]I;G1E<CI',C@]*C$P '1?<W1R
+M=6-T.E0R.3US,C1V7V-H87)?;65M8F5R.C(L,"PX.W9?<VAO<G1?;65M8F5R
+M.C0L,38L,38[=E]I;G1?;65M8F5R.C$L,S(L,S([=E]L;VYG7VUE;6)E<CHQ
+M+#8T+#,R.W9?9FQO871?;65M8F5R.CDL.38L,S([=E]D;W5B;&5?;65M8F5R
+M.C$P+#$R."PV-#L[ '9?<W1R=6-T,3I',CD =E]S=')U8W0R.D<S,#US,C1V
+M7V-H87)?;65M8F5R.C(L,"PX.W9?<VAO<G1?;65M8F5R.C0L,38L,38[=E]I
+M;G1?;65M8F5R.C$L,S(L,S([=E]L;VYG7VUE;6)E<CHQ+#8T+#,R.W9?9FQO
+M871?;65M8F5R.CDL.38L,S([=E]D;W5B;&5?;65M8F5R.C$P+#$R."PV-#L[
+M '1?=6YI;VXZ5#,Q/74X=E]C:&%R7VUE;6)E<CHR+# L.#MV7W-H;W)T7VUE
+M;6)E<CHT+# L,38[=E]I;G1?;65M8F5R.C$L,"PS,CMV7VQO;F=?;65M8F5R
+M.C$L,"PS,CMV7V9L;V%T7VUE;6)E<CHY+# L,S([=E]D;W5B;&5?;65M8F5R
+M.C$P+# L-C0[.P!V7W5N:6]N.D<S,0!V7W5N:6]N,CI',S(]=3AV7V-H87)?
+M;65M8F5R.C(L,"PX.W9?<VAO<G1?;65M8F5R.C0L,"PQ-CMV7VEN=%]M96UB
+M97(Z,2PP+#,R.W9?;&]N9U]M96UB97(Z,2PP+#,R.W9?9FQO871?;65M8F5R
+M.CDL,"PS,CMV7V1O=6)L95]M96UB97(Z,3 L,"PV-#L[ '9?8VAA<E]F=6YC
+M.D8R '9?<VEG;F5D7V-H87)?9G5N8SI&,@!V7W5N<VEG;F5D7V-H87)?9G5N
+M8SI&-0!V7W-H;W)T7V9U;F,Z1C0 =E]S:6=N961?<VAO<G1?9G5N8SI&- !V
+M7W5N<VEG;F5D7W-H;W)T7V9U;F,Z1C8 =E]I;G1?9G5N8SI&,0!V7W-I9VYE
+M9%]I;G1?9G5N8SI&,0!V7W5N<VEG;F5D7VEN=%]F=6YC.D8X '9?;&]N9U]F
+M=6YC.D8Q '9?<VEG;F5D7VQO;F=?9G5N8SI&,0!V7W5N<VEG;F5D7VQO;F=?
+M9G5N8SI&. !V7V9L;V%T7V9U;F,Z1CD =E]D;W5B;&5?9G5N8SI&,3  ;&EN
+M:SI4,S,]<S$U,FYE>'0Z,S0]*C,S+# L,S([;&EN:V9U;F,Z,S4]*C,V/68S
+M-"PS,BPS,CMS='5F9CHS-SUA<C$[,#LP.S,X/6%R,3LP.S$[,SD]87(Q.S [
+M,CLR.2PV-"PQ,34R.SL <U]L:6YK.D<S- !T=5]L:6YK.E0T,#UU,30T;F5X
+M=#HS-"PP+#,R.VQI;FMF=6YC.C,U+# L,S([<W1U9F8Z,S<L,"PQ,34R.SL 
+M=5]L:6YK.D<T, !P<FEM87)Y.D<T,3UE<F5D.C L9W)E96XZ,2QB;'5E.C(L
+M.P!C;VQO<G,Z5#0R/65Y96QL;W<Z,"QP=7)P;&4Z,2QP:6YK.C(L.P!N;VYP
+M<FEM87)Y.D<T,@!C;'5N:V5R.D<T,SUE8VAE=GDZ,"QF;W)D.C$L.P!C87)S
+M.E0T-#UE8FUW.C L<&]R<V-H93HQ+#L <W!O<G1S8V%R.D<T- !B;V]L96%N
+M.G0T-3UE1D%,4T4Z,"Q44E5%.C$L.P!B=F%L<SI4-#8]969A;'-E.C L=')U
+M93HQ+#L 8F]O;&5A;C(Z=#0V &UI<V]R9&5R960Z5#0W/65T=V\Z,BQO;F4Z
+M,2QZ97)O.C L=&AR964Z,RP[ &UA:6XZ1C$ +6QG %]S8V-S:60 97AI="YO
+M &9A:V-U+F\ 7V5X:70N;P!C97)R;W(N;P!?96YV:7)O;@!S=&%R= !?;6%I
+M;@!?97AI= !?;6]N8V]N=')O; !M8V]U;G0 7W9?8VAA<@!?=E]S:6=N961?
+M8VAA<@!?=E]U;G-I9VYE9%]C:&%R %]V7W-H;W)T %]V7W-I9VYE9%]S:&]R
+M= !?=E]U;G-I9VYE9%]S:&]R= !?=E]I;G0 7W9?<VEG;F5D7VEN= !?=E]U
+M;G-I9VYE9%]I;G0 7W9?;&]N9P!?=E]S:6=N961?;&]N9P!?=E]U;G-I9VYE
+M9%]L;VYG %]V7V9L;V%T %]V7V1O=6)L90!?=E]C:&%R7V%R<F%Y %]V7W-I
+M9VYE9%]C:&%R7V%R<F%Y %]V7W5N<VEG;F5D7V-H87)?87)R87D 7W9?<VAO
+M<G1?87)R87D 7W9?<VEG;F5D7W-H;W)T7V%R<F%Y %]V7W5N<VEG;F5D7W-H
+M;W)T7V%R<F%Y %]V7VEN=%]A<G)A>0!?=E]S:6=N961?:6YT7V%R<F%Y %]V
+M7W5N<VEG;F5D7VEN=%]A<G)A>0!?=E]L;VYG7V%R<F%Y %]V7W-I9VYE9%]L
+M;VYG7V%R<F%Y %]V7W5N<VEG;F5D7VQO;F=?87)R87D 7W9?9FQO871?87)R
+M87D 7W9?9&]U8FQE7V%R<F%Y %]V7V-H87)?<&]I;G1E<@!?=E]S:6=N961?
+M8VAA<E]P;VEN=&5R %]V7W5N<VEG;F5D7V-H87)?<&]I;G1E<@!?=E]S:&]R
+M=%]P;VEN=&5R %]V7W-I9VYE9%]S:&]R=%]P;VEN=&5R %]V7W5N<VEG;F5D
+M7W-H;W)T7W!O:6YT97( 7W9?:6YT7W!O:6YT97( 7W9?<VEG;F5D7VEN=%]P
+M;VEN=&5R %]V7W5N<VEG;F5D7VEN=%]P;VEN=&5R %]V7VQO;F=?<&]I;G1E
+M<@!?=E]S:6=N961?;&]N9U]P;VEN=&5R %]V7W5N<VEG;F5D7VQO;F=?<&]I
+M;G1E<@!?=E]F;&]A=%]P;VEN=&5R %]V7V1O=6)L95]P;VEN=&5R %]V7W-T
+M<G5C=#$ 7W9?<W1R=6-T,@!?=E]U;FEO;@!?=E]U;FEO;C( 7W9?8VAA<E]F
+M=6YC %]V7W-I9VYE9%]C:&%R7V9U;F, 7W9?=6YS:6=N961?8VAA<E]F=6YC
+M %]V7W-H;W)T7V9U;F, 7W9?<VEG;F5D7W-H;W)T7V9U;F, 7W9?=6YS:6=N
+M961?<VAO<G1?9G5N8P!?=E]I;G1?9G5N8P!?=E]S:6=N961?:6YT7V9U;F, 
+M7W9?=6YS:6=N961?:6YT7V9U;F, 7W9?;&]N9U]F=6YC %]V7W-I9VYE9%]L
+M;VYG7V9U;F, 7W9?=6YS:6=N961?;&]N9U]F=6YC %]V7V9L;V%T7V9U;F, 
+M7W9?9&]U8FQE7V9U;F, 7W-?;&EN:P!?=5]L:6YK %]P<FEM87)Y %]N;VYP
+M<FEM87)Y %]C;'5N:V5R %]S<&]R='-C87( 7U]D8F%R9W, 7U]D8G-U8F, 
+M7U]D8G-U8FX 7U]L9U]F;&%G %]?8VQE86YU< !?7V5X:70 8V5R<F]R %]E
+M<G)N;P                                                      
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+%        
+ 
+end
diff --git a/gdb/testsuite/gdb.base/m68k-aout2.u b/gdb/testsuite/gdb.base/m68k-aout2.u
new file mode 100644
index 0000000..b920961
--- /dev/null
+++ b/gdb/testsuite/gdb.base/m68k-aout2.u
@@ -0,0 +1,2208 @@
+begin 777 m68k-aout2
+M 0(!"P  @    ,          'B0  " @          !-^   )!='[P $(@+E
+M@4GS& 0CS  "  !*N0  (@9G   &80  *DA42%,O DZY   BF$ZY   C9M[\
+M  PO $ZY   F0%B/+P!.N0  )MA.5O_(2.<P $AZ :Q(>   2'H!BDZZ 3;?
+M_     @M0/_P2'@ ($AN_\@O $ZZ 3S?_    ! ,@    "!G"$'Z 79@  $T
+M#&X!"__*9O D/   '__4KO_, H+__@  !H(  @  ( +0KO_0T*[_U$AZ 6)(
+M>   +R[_\"\Z 9@O.@&@+P!(>   3KH S-_\    &"U _^@O+O_,+R[_\"\Z
+M 7@O.@%X+R[_T" "T*[_Z"\ 3KH HM_\    &"8 E*[_S"\"("[_Z-"N_\PO
+M $ZZ )#?_     Q(>@$B2'@  $AZ ,E.N@!F4(\M0/_L2J[_U&8$6(]@(DAX
+M   O "\Z 1@O.@$8+R[_U-:N_] O TZZ $3?_    !Q!^O[(+4C__"UY  ( 
+M /_X+7H ;/_T2&[_Z$AX  $@;O_HT>[_W$Z04(],WP ,3EY.=2!O  Q(>  %
+M8!P@;P <2'@ 1V 2(&\ #$AX $E@""!O !!(>  #3D!E DYU+QA(4$AX  )(
+M>   2'@ !$Y +WP   !_  1(>  !3D      +W5S<B]L:6(O;&0N<V\ +V1E
+M=B]Z97)O       88W)T,#H@;F\@+W5S<B]L:6(O;&0N<V\*    )6-R=# Z
+M("]U<W(O;&EB+VQD+G-O(&UA<'!I;F<@9F%I;'5R90H     $V-R=# Z(&YO
+M("]D978O>F5R;PH @    H   !(    '    !0       $[Y   ER   3E8 
+M $* 8    DY>3G5.5@  0H!@   "3EY.=4Y6  !"@&    ).7DYU3E8  $* 
+M8    DY>3G5.5@  0H!@   "3EY.=4Y6  !"@&    ).7DYU3E8  $* 8   
+M DY>3G5.5@  0H!@   "3EY.=4Y6  !"@&    ).7DYU3E8  $* 8    DY>
+M3G5.5@  0H!@   "3EY.=4Y6  !"@&    ).7DYU3E8  '  8    DY>3G5.
+M5@  < !R &    ).7DYU3E8  &'_   "0D(Y  *P4!/\  $  K!2$_P  @ "
+ML%0S_  #  *P5C/\  0  K!8,_P !0 "L%IP!B/   *P7' '(\   K!@< @C
+MP  "L&1P"2/   *P:' *(\   K!L< LCP  "L' C_$+(     K!T(_Q :0  
+M  *P>$*Y  *P?!/Y  *P4  "L( 3^0 "L%(  K""$_D  K!4  *PA#/Y  *P
+M5@ "L(@S^0 "L%@  K",,_D  K!:  *PD"/Y  *P7  "L)@C^0 "L&   K"@
+M(_D  K!D  *PJ"/Y  *P:  "L+ C^0 "L&P  K"X(_D  K!P  *PP"/Y  *P
+M=  "L,@C^0 "L'@  K#0(_D  K!\  *PU"/\  *P4  "L. C_  "L%(  K#D
+M(_P  K!4  *PZ"/\  *P5@ "L.PC_  "L%@  K#P(_P  K!:  *P]"/\  *P
+M7  "L/@C_  "L&   K#\(_P  K!D  *Q "/\  *P:  "L00C_  "L&P  K$(
+M(_P  K!P  *Q#"/\  *P=  "L1 C_  "L'@  K$4< (CP  "L1@CP  "L1QP
+M 2/   *Q("/   *Q)"/Y  *Q*  "L3 S^0 "L<   K'(3EY.=0  3E8  "\+
+M+PI"@$'Y  *R#$J09PA82%* 2I!F^$J ;Q1'^0 "L@A%\PP (%).D%E*M\IM
+M]B1N__@F;O_\3EY.=4Y6   O"D7Y  *R%$J29P@@6DZ02I)F^$*G2'D  "5 
+M8?\   #F)&[__$Y>3G5.5@  2KD  @ \9@IP 2/   ( /&&\3EY.=4CG@,!.
+MN0  *\A*0&<,3KD  "MH3-\# 4YU2'@ /4AZ !9(>  "3KD  ";.2'@ 8TZY
+M   FV$U#-C@X.#$@9FQO871I;F<@<&]I;G0@;F]T(&%V86EL86)L92 M+2!P
+M<F]G<F%M(')E<75I<F5S(&ET"@       $Y6__A(UR" +BX "& 4(^T "  "
+MLA@O+0 $+P<@54Z04$\J>0 "LAA*C6;B3KD  ";P+P=.N0  )MA83TSN((#_
+M^$Y>3G4  $Y6__PNC4AX  Q.N0  +PA83RI 2HUF!'#_8!HJK@ (*VX #  $
+M*WD  K(8  @CS0 "LAAP "IN__Q.7DYU  !.^0  )N!(>  $3D!E\DYU2'@ 
+M 4Y    CP  " $1P_TYU        3E8  $AY   G!DZY   W(%A/3EY.=4Y6
+M__A(UR" *FX "'[_2HUG<# M ! "@    0-G.C M ! (   &9C P+0 0"   
+M F<$?@!@#$A53KD  ">46$\N ! M !))P"\ 3KD  #AV6$]*@&P"?O\P+0 0
+M"    V<0+RT "$ZY   P'EA/0JT "$)M !!"E2MM  @ !$*M  P@!TSN((#_
+M^$Y>3G5.5O_\+HTJ;@ (,"T $ @   %F)F \,"T $ @   %G)$JM  AG'B M
+M  2PK0 (8Q1(54ZY   I8EA/,"T $ @   )GTC M ! (   %9P1P_V "<  J
+M;O_\3EY.=4Y6_^Q(UR# *FX #!PN  LP+0 0 H    "2#(    ""9CP@+0 (
+MT*T #+"M  1C  "\(&T !%)(*T@ !!%&__\,!@ *9@ !'DA53KD  "EB6$]^
+M_["'9@ !#&   00P+0 0?A; AWX&L(=F,!U&__]"E4AX  %(;O__$"T $DG 
+M+P!.N0  )LY^ ;"'9P  U@!M "  $'#_8   SC M !!^$L"'?@*PAV8@2JT 
+M"&<:("T !+"M  AF)$J59B P+0 0 H    "$9A1(54ZY   IYEA/2H!G!G#_
+M8   C# M ! "@    (1F /\F2%5.N0  *6)83U.5;1 @;0 $4D@K2  $$4;_
+M_V!,,"T $ @   =G,B 51("PK0 ,;"@@;0 $$(8,!@ *9Q @;0 $4D@K2  $
+M$"C__V <2%4@;0 $<  0$& &2%5P ! &+P!.N0  )_!03S M ! (   %9P1P
+M_V $<  0!DSN(,#_[$Y>3G5.5O_P2-<PP"IN  @H;0 (+"T !)R,*TP !# M
+M ! "@    (1G!'X 8 0N+0 ,*H=*E6P$?@!@ BX5("T "-"M  R0K0 $L(=L
+M"DA53KD  "M 6$]*AF\@+P9(5! M !))P"\ 3KD  ";.O(!G"@!M "  $'#_
+M8 )P $SN,,#_\$Y>3G5.5O_X2-<@@"IN  @P+0 0?A+ AWX"L(=G'C M ! "
+M@    0)F!'#_8&AP[\!M !!R H!!.T  $# M ! (   &9DY*K0 (9@I(54ZY
+M   J@EA/("T !+"M  AF-# M ! "@    (1F*"JM  Q*E6P$?@!@ BX5("T 
+M"-"M  R0K0 $L(=L"DA53KD  "M 6$]P $SN((#_^$Y>3G5.5O^T2-<@P"IN
+M  @0+0 22< L # M ! (   "9Q8@>0 " I1!\&X *T@ "'X(*T< #&!Z+P9.
+MN0  -7!83TJ 9PX ;0"  ! N/    (!@'DAN_\0O!DZY   XAE!/2H!M!BXN
+M__!N!BX\   $ " '4( O $ZY   O"%A/*T  "&<, &T "  0*T< #& @('D 
+M @*40?!N "M(  A^""M'  P";?]_ !  ;0 $ ! K;0 (  1,[B# _[1.7DYU
+M3E;_]")N  @@:0 (T>D #" (D*D !&H&(T@ !& &L)%L B* 3EY.=4CGP, @
+M.0 " $P,0  $9@8P/  28"0,0  #9@8P/  .8!@,0  "9@8P/  *8 P,0  !
+M9@8P/  &3G%!^0 "JZQ@!B-Q     B)8L_P     9O!.0DS? P-.=0      
+M $[Y   KZ   3E8  '(!(\$  K(<(&X $%RH  Q.7DYU3E;_Y"Z'2KD  @!8
+M9QH,N0    (  @!89@  Q'X#(\<  @!,8   N"U\   KT/_T0J[_^$*N__Q(
+M;O_H2&[_]$AX  =.N0  -Z!/[P ,0KD  K(<3KD  #H82&[_]$AN_^A(>  '
+M3KD  #>@3^\ #$JY  *R'&<$?@%@ GX"(\<  @!8#+D    "  ( 6&9.?@,C
+MQP " $Q.N0  .C!*@&8V2'D  "S@2'D  @+$3KD  #EP4$](>0  +2!(>0 "
+M L1.N0  .7!03TAY  ("Q$ZY   GE%A/3KD  #H8#+D    "  ( 6&8$< %@
+M G  +B[_Y$Y>3G4*(%!L96%S92!N;W1E.B!-0S8X.#@Q('5P9W)A9&4@=&\@
+M03DS3B!M87-K(&UA>2!B92!A9'9I<V%B;&4N( H 4V5E($9L;V%T:6YG+5!O
+M:6YT(%!R;V=R86UM97(G<R!'=6ED92X* $Y6_^Q(US#@*'P  @"P*E0J+@ ,
+M+"X "& 0O*T "&0$*$U@!$GM  0J5$J-9@1^ & $+BT #+Z%9.!.N0  -(0N
+M &=$*(<@1T*00J@ !"%&  @A10 ,($8@A2A'6(=*C6<>O*T "&,,*(U)[0 $
+M*FT !& (($<@C2X-*E5*C6;BF\T@1R"-*(U,[C#@_^Q.7DYU3E;_Z$C7,/ J
+M;@ (*%4L%&8$> !@!B!&*"@ #"XL  1F!'H 8 8@1RHH  R\AV=TN(5E.$J&
+M9VA*A&8:($8@*  (6( O $AY  ( \$ZY   U7%!/8$XJAEB&*D8L%68$> !@
+M/"!&*"@ #& T2H=G,$J%9AH@1R H  A8@"\ 2'D  @$$3KD  #5<4$]@%BJ'
+M*D<N%68$>@!@!B!'*B@ #+R'9HQ"E4A43KD  #5"6$],[C#P_^A.7DYU3E;_
+MY$C7,( J;@ ((%5*B&8$< !@!" H  PH4")H  1*C&8$?@!@)BXL  Q@(+Z!
+M918JC$OL  0H54J,9@1^ & 8+BP #& 2*HDJ22)52HEF!'( 8 0B*0 ,OH!B
+MT+* 8LPJB"",(4D !$SN,(#_Y$Y>3G5.5O_D2-<P^"@N  A8A'X(N(=D!'@(
+M8 96A.2,Y8Q*N0 " +!F!'H 8 H@>0 " + J*  ,NH1D%"\$3KD  #/(6$]*
+M@&8&< !@  #"*'P  @"P*E1@(+Z&8@R^A&042>T !"I#8!"\A&4(2>T !"I#
+M8 0H32I%*A4F+0 $2H5F!'X 8 8@12XH  Q*@V8$? !@!B!#+"@ #+Z$9+J\
+MA&2V("T #)"$?@BPAV(0*BT "$A43KD  "W:6$]@+BHM  @N!=Z$($4F$):$
+M*T, #"!'((-2N0 " '0K1P (2%1.N0  +I183R!%((0@12 0T;D  @"D4KD 
+M @"HN+D  @"89 92N0 " 'A8A2 %3.XP^/_D3EY.=4Y6_^!(US#\)"X "! "
+M?@/ AV<6+P)(>0 " 1A.N0  -5Q03W  8   \+2Y  ( M&4(M+D  @"X8PY^
+M%B/'  ( 1'  8   TBP"688@1B@0F;D  @"D4[D  @"H*'P  @"P*E1*C6< 
+M *(N+0 ()BT #+R'9#@J!MJ$NH=F%-B#4[D  @!T2%1.N0  +=I83V!PNH=C
+M%"\'+P9(>0 " 5=.N0  -5QP &!N*$U@5+R'8SPJ!]J#NH9F%BP'V(-3N0 "
+M '1(5$ZY   MVEA/8#*ZAF,4+P)(>0 " 79.N0  -5Q03W  8#!)[0 $8!0O
+M DAY  (!F$ZY   U7%!/< !@%BI42HUF /]B+P0O!DZY   M2%!/< %,[C#\
+M_^!.7DYU3E;_\$C7,, H;@ (+"X $"XN  R>AG((OH%E($OT:  JARB&4KD 
+M @!T4KD  @"H2&T !$ZY   P'EA/6$P@#$SN,,#_\$Y>3G5.5O_@2-<X^"IN
+M  @@#7X#P(=F$+OY  ( M&4(N_D  @"X8Q9(54AY  (!NDZY   U7%!/< !@
+M  #T1^W__"@30?-( "P(2'@  2\$2%-.N0  ,L!/[P ,?O^PAV8&< !@  #*
+M+BX #%B'>@B^A60$=@A@"%:'Y(_ECR8'N(-E$"\#+P1(4TZY   Q0&   )Z\
+MN0 " +AD8BA\  ( L"I4($8J$& *2>T !& "*$TJ5$J-9@1^ & $+BT #+Z%
+M93HN+0 (O(=EY+R'8MHN!-Z%OH-E)DA43KD  "W:6$]3N0 " '3;N0 " *0F
+MAR\#+P=(4TZY   Q0& R+RX #$ZY   O"%A/*D!*C6<>6$M9A"\$2%5(4TZY
+M   ]"$_O  Q(4TZY   P'EA/( U,[CCX_^!.7DYU3E;_Y$C7/. J+@ ,+"X 
+M""1&U<4F?  " +!@""9-8 1'[0 $*E-*C68$?@!@!"XM  R^A64  ,8H;0 (
+MO(QF'$A33KD  "W:6$_;N0 " *12N0 " *AP 6   *2\C&6\+@S>E+R'9+BU
+MQV,:2JX $&<0+P9(>0 " D=.N0  -5Q03W#_8'BUQV8N2%-.N0  +=I83U*Y
+M  ( =-NY  ( I%2Y  ( J)N42&P !$ZY   P'EA/< %@1DA33KD  "W:6$]4
+MN0 " '0@%-&Y  ( I%:Y  ( J" 'D(:1E)Z*)(=(;  $3KD  # >6$](:@ $
+M3KD  # >6$]P 6 "< !,[CS@_^1.7DYU3E;_]$C7(,!*N0 " &QF(DZY   X
+MIB/   ( ;$ZY   TA"I 2HUG.DA53KD  #5"6$\N.0 " &Q3A]ZN  A,>7 '
+M  ( ;$PY< <  @!L+ <O!DZY   XX%A/*D!R_[O!9@1P &!,2KD  @"T9@8C
+MS0 " +1!]6@ (\@  @"X*H<@.0 " +B0N0 " +0CP  " '#?N0 " *12N0 "
+M '12N0 " *A(;0 $3KD  # >6$]P 4SN(,#_]$Y>3G5.5O_X2-<@@$JY  ( 
+MQ&<6*GD  @#$('D  @#$(]   @#$8   CDJY  ( P&YP+CP  " $+P=.N0  
+M..!83RI <O^P@6822'D  @)Y3KD  #5<6$]P &!<2KD  @"T9@8CS0 " +0J
+MAT'M  0CR  " +PC_    @   @# 0?5X "/(  ( N" Y  ( N)"Y  ( M"/ 
+M  ( <-^Y  ( K%.Y  ( P"IY  ( O'X0W[D  @"\( U,[B" __A.7DYU3E8 
+M "!N  @@N0 " ,0C[@ (  ( Q$Y>3G5.5@  <A8CP0 " $1.7DYU     $Y6
+M_^@NARXY  ( 1$AN_^Q(>4 25 $O+@ (3KD  #BV2H!L"B/'  ( 1'  8 )P
+M 2XN_^A.7DYU3E;__"Z-2KD  JZL9C@J?  " IPP+0 0 H    $#9@0@#6!H
+M2^T %+O\  (%'&7D3KD  #8\2H!F#'(,(\$  @!$< !@1BIY  *NK$J59R0@
+M53 H ! "@    0-G%EA-N_D  JZP9>1R&"/!  ( 1'  8!A*E6822'@ %$AX
+M  %.N0  /9!03RJ (!4J;O_\3EY.=4Y6__A(UR" 3KD  #B6+@!(>  $+P=.
+MN0  /9!03R/   *NK$JY  *NK&8$< !@7" 'YX O $ZY   O"%A/(\   @*4
+M9A@O.0 "KJQ.N0  ,!Y83T*Y  *NK'  8"X@>0 "KJQ!\'P (\@  JZP+CP 
+M @*<*GD  JZL8 8JQW(4WH$,AP "!1QE\G !3.X@@/_X3EY.=4Y6__PNC4JY
+M  *NK&8*3KD  #8\2H!G+BIY  *NK+OY  *NL&0@2I5F$DAX !1(>  !3KD 
+M #V04$\J@%A-N_D  JZP9> J;O_\3EY.=4Y6__PNC4JN  AG9DJY  *NK&8J
+M*GP  @*<,"T $ *    ! V<*2%4@;@ (3I!83TOM !2[_  "!1QD-F#<*GD 
+M JZLN_D  JZP9"9*E6<8(%4P*  0 H    $#9PHO%2!N  A.D%A/6$V[^0 "
+MKK!EVBIN__Q.7DYU        3E;_V$C7/. N+@ (;P9\(+Z&;09^%F   *8D
+M;@ 0+"X #" '4X!R >&A+P%.N0  .,983RH 2_D  K(@2_5\ "952%(O!B\'
+M3KD  #EF3^\ #$J :U9*AF<V0>[_]")&(-D@V2#92>[_]"P49PYR ;R!9P@J
+MABB\   Y&$*G2%0O!TZY   Y9D_O  Q*@&L<2HIG"@R2   Y&&8")(LO!4ZY
+M   XUEA/< !@&BXY  ( 1"\%3KD  #C66$\JBR/'  ( 1'#_3.X\X/_83EY.
+M=4[Y   FX$AX  9.0&7R3G5.^0  )N!(>  ^3D!E\DYU3OD  ";@2'@ 64Y 
+M9?).=4[Y   FX$AX $!.0&7R3G5.^0  )N!(>  V3D!E\DYU3OD  ";@2'@ 
+M;4Y 9?).=4[Y   FX$AX &Y.0&7R3G4@+P $5H!R_,"!T+D  @4<+T  !$AX
+M !%.0&40(#D  @4<(^\ !  "!1Q.=4[Y   FX        $CGP,!.N0  .G @
+M+P$0Y8@@?  "LB @< @ +R\!'"\O 1PO+P$<+R\!'$Z0W_P    03KD  #JX
+M3-\# ]_\    "$AX (M.0$[Y   FX$AX &Q.0&7R3G5.5OOX2-<@@"IN  A!
+M[@ 0+@@P+0 0"    686,"T $ @   AG" !M  ( $& $</]@:C M ! (   "
+M9TX";?_[ !!![OP *T@ "$'N_  K2  $*WP   0   Q(52\'+RX #$ZY   ]
+MX$_O  PN $A53KD  ">46$\ ;0 $ !!"K0 (0JT #$*58!!(52\'+RX #$ZY
+M   ]X"X ( =,[B" ^_A.7DYU  #R.IP   1.=0                    #R
+M.E04 "CR &0 #( E@   9A;R.E0  ![R &0 #(  @   9@1P 6 "0H!.=3_P
+M       !. ____X         G_P   #\+R\ _$'O  0@* $0(, ,0  (9RP@
+M.0 " $P@P Q   1F"$ZY   [YF 6#$   V8(3KD  #KZ8 @,0  "9@)A6DYU
+M0>\ !" 8#$  "&<J(!@,0  $9@A.N0  /&!@&@Q   -F"$ZY   [!F ,#$  
+M F8&3KD  #MV+U<! -_\   ! $YU\A#PP/(HO   &$YU\AC0P/(0G !.=2)Y
+M  (%U# I__X(   .9P@Q?!!C "!@(DII__YJZ$AH " O/$ "   O.0 "LJ!.
+MN0  .+;?_     PS?!!C__PS?!! __P@D2%1  0A40 ((5$ #"%1 ! A40 4
+M(5$ &"%1 !Q.=2)Y  (%U# I__X(   .9P)@(DII__YJ[DAH "0O/$ "   O
+M.0 "LJ!.N0  .+;?_     PS?!!C__PS?!!!__PBD"*H  0BJ  ((J@ #"*H
+M ! BJ  4(J@ &"*H !PP*?_^"   #F?V,V@ (/_\3G7R$/# T?P    8\AB\
+M ")\X  /%"#9(-D@V2#9(-D@V2#9(-D@V2#9(-DC_     #@  ^$(GS@  X 
+M(-D@V2#9(-D@V2#9(-D@V2)\X    "-\      \<(WP     #Q0C?     ((
+MT/(\B       \CR0      !.=2/\     .  #X3R&-# \AB< -'\    +")\
+MX  , "+8(M@BV"+8(M@BV"+8(MB1_    $PB?.  #Q0BV"+8(M@B?.     @
+M*  8 H     /(T (T"-H !P)6"-\      G$(!!!Z  (3KD  #S>("C__$'H
+M  A.N0  /-Y.=4A "   #V8: D ?_".0  !(0 @   ]F"@) '_PCJ  $  !.
+M=0       "!O  0B;P (("\ #&],(@F2B&P   1$@;* ;0  0#((" $  &<$
+M$MA3@"()" $  &8>(@#DB& "(MA1R/_\0D!3@&3T( $"@     -@ A+84<C_
+M_$) 4X!D]$YUL\AN$& "$MA1R/_\0D!3@&3T3G71P-/ 8 (3(%'(__Q"0%. 
+M9/1.=0    !.5O_X2-< P"PN  A,+F &  PO!DZY   O"%A/+@!F!'  8 XO
+M!B\'3KD  $_X4$\@!TSN ,#_^$Y>3G5.5@  +RX "$ZY   P'EA/3EY.=4Y6
+M]H!(USS\3KD  %XV($ @4!U0__]"KO_X?@$M1__T0J[_\"UN  S_Y"UN_^3_
+MZ"UN_^C_["UN_^S_X"IN  @<'6=&)FX $# K !!^$L"'?@*PAV8@2JL "&<:
+M("L !+"K  AF*DJ39B8P*P 0 H    "$9AI(4TZY   IYEA/2H!G#'#_8  .
+M>'  8  .<G0 )&L !"X30>[VQ"U(]K!![O;$+4CVM$'N]L0M2/;4# 8 )6< 
+M BA3AVHL,"L $ *     A&<*( =$@+"K  QM%B=*  1(4TZY   I8EA/)&L 
+M!"X34X<4QE*"8  -NB!N_^@H4%BN_^A*C&8&*'D  @4D'!QG  V@4X=J+# K
+M ! "@    (1G"B '1("PJP ,;18G2@ $2%-.N0  *6)83R1K  0N$U.'%,92
+M@F#$(&[_Z" 0' !8KO_H4X=J+# K ! "@    (1G"B '1("PJP ,;18G2@ $
+M2%-.N0  *6)83R1K  0N$U.'%,92@F  #28@;O_H+!!8KO_H2H9J1%.':BPP
+M*P 0 H    "$9PH@!T2 L*L #&T6)TH !$A33KD  "EB6$\D:P $+A-3AQ3\
+M "U2@D2&8 H@;O_H+!!8KO_H*'D  @4H2>[[WRHY  (%*" &3'P  0    H@
+M11DP& !,?& &    "F;F8   B"HY  (%+"!N_^@L$%BN_^A)[OO?2H9G  "X
+M2H9G:' /P(8@11DP" #HCF;R8%@J.0 "!2@@;O_H+!!8KO_H2>[[WTJ&9P  
+MBDJ&9SIP#\"&($49, @ Z(YF\F J*CD  @4H(&[_Z"P06*[_Z$GN^]]*AF=<
+M2H9G#G 'P(8@11DP" #FCF;R0>[[WR8(N<-D  P4'!Q3AVHL,"L $ *     
+MA&<*( =$@+"K  QM%B=*  1(4TZY   I8EA/)&L !"X34X<4QE*"N<-EQF  
+M"]9\,&  _G1536!.($U231 02<!\>+"&8NY!^@ P<@VP&%3)__QFX# [$@9.
+M^P "_H+_7O[*_P+^/OZ"_]S^@O_<_U[_,/WN_LK_,'AU<W!O;&EH9&-854]$
+M0B[[TT(N^])"+OO10B[[T$(N^\]"+OO.8"8=?  !^])@'AU\  '[T6 6'7P 
+M ?O08 X=?  !^\]@!AU\  '[SE)-$!5)P'P@L(9GWGPCL(9GX'PKL(9GPGPM
+ML(9GQ'PPL(9GUF!<2J[_]&<:2&[[ "\N_^0O+@ (3KD  $SJ3^\ #$*N__0,
+MK@   #+_\&X4("[_\$/V#2#Z_"U)]JHM4?_H8!PM;OO$_^@O+O_P2&[_Z"\N
+M  A.N0  3GY/[P ,4DT,%0 J9@  HE)-2&[[R$A53KD  $^>4$\J &=T2J[_
+M]&<:2&[[ "\N_^0O+@ (3KD  $SJ3^\ #$*N__0,K@   #+[R&X4("[[R$/V
+M#2#Z_"U)]JHM4?_@8!PM;OO$_^ O+OO(2&[_X"\N  A.N0  3GY/[P ,(&[_
+MX"P06*[_X$J&:@A$AAU\  '[T2I%8$@@;O_H+!!8KO_H2H9J.D2&'7P  ?O1
+M8#!\ $*N__!@%A =2<!Z,)"%W(8B!N6!W('<@"U&__ 0%4B 0?D  @7="#  
+M @  9M@,%0 N9@  O%)-#!4 *F8  (I234AN^OQ(54ZY  !/GE!/* !G:$JN
+M__1G&DAN^P O+O_D+RX "$ZY  !,ZD_O  Q"KO_T#*X    R^OQN%" N^OQ#
+M]@T@^OPM2?:J+5'_[& <+6[[Q/_L+R[Z_$AN_^PO+@ (3KD  $Y^3^\ #"!N
+M_^PJ$%BN_^PJ1& V(&[_Z"H06*[_Z& J>@ 0%4B 0?D  @7="#   @  9Q80
+M'4G >#"0A-J%(@7E@=J!VH!@VGK_#!4 )&< _@)"KOKX+7P  @5$^O1"KOKP
+M+7P  @5$^NQ@  9H'7P  ?O38  &7AU\  KZZV .'7P "/KK8 8=?  0^NM*
+MA6P">@$@;O_H*!!8KO_H#"X 9/KJ9Q ,+@!$^NIG" PN &GZZF8N2H1L#"U\
+M  (%1?KT1(1@'DHN^])G"BU\  (%1_KT8 Y*+OO09P@M?  "!4GZ]$HN^\YG
+M%B\N^O1.N0  4)!83RA&F<"YQ6\"*@P,+@!8^NIF""8Y  (%+& &)CD  @4H
+M2>[[WQ N^NM)P'((L(%G"'(0L(%G%F! 2H1G0' 'P(0@0QDP" #FC&;R8#!*
+MA&<L< _ A"!#&3 ( .B,9O)@'" $3'P  0    H@0QDP& !,?$ $    "DJ$
+M9N1![OO?)@@@#)"#T(4M0/KX2B[[SV< !;:YPV8R8  %K@RN     ?KX;  %
+MHGH!+47Z^&  !9@M?  "!4OZ]&  !8PM?  "!4[Z]&  !8 0+OKJ2<!Z6+"%
+M9^AZ;["%9\!Z>+"%9]!@  5D2H5L GH&2B[[TV8X(&[_Z"U0^N M:  $^N10
+MKO_H2&[VV$AN^MA(;OK<( 52@"\ +R[ZY"\N^N!.N0  8?A/[P 88#8H;O;4
+M=A#6C"!N_^@HT%BN_^BYPV7R2&[VV$AN^MA(;OK<( 52@"\ 2&[VQ$ZY  "(
+M<$_O !0H0$JN^MAG"BU\  (%4?KT8!Y*+OO29PHM?  "!5/Z]& .2B[[T&<(
+M+7P  @55^O0,+@ Y]MAO%DGN]MA![  !)@@@0TH09P  SE*#8/1![OO4)@A*
+M%&<$&!Q@ G@P($,0A%*#2H5F!DHN^\]G""!#$*[__U*#+47Z\& .2A1G$%.N
+M^O @0Q"<4H-*KOKP;NQ)[OO4#"X ,/;89Q8J+OK<4X5J$$2%8 Q![O; *@AX
+M!& X>@!(;O:^<  P!2\ 3KD  'B04$]"+O;">&2ZA&W8#(4   /H; I![O:_
+M*@AX!6 (0>[VOBH(> 8M1/:X4X4H!4JN^MQN" PN ##VV&8$>BM@ GHM($00
+MA5.$+43Z["!$$*[ZZDHN^]%F!'H!8 )Z ! N^\Y)P,"%9P #O"\N^O1.N0  
+M4)!83T'N^]0B Y*(T('0KOKPT*[VN"(&DH M0?KX8  #DDJ%; )Z!DHN^]-F
+M-"!N_^@M4/K@+6@ !/KD4*[_Z$AN]MA(;OK82&[ZW"\%+R[ZY"\N^N!.N0  
+M8LY/[P 88#(H;O:T=A#6C"!N_^@HT%BN_^BYPV7R2&[VV$AN^MA(;OK<+P5(
+M;O;$3KD  (E&3^\ %"A 2J[ZV&<*+7P  @57^O1@'DHN^])G"BU\  (%6?KT
+M8 Y*+OO09P@M?  "!5OZ] PN #GVV&\62>[VV$'L  $F""!#2A!G  +64H-@
+M]$'N^]0F""@N^MQN"B!#$+P ,%*#8!9*%&8(($,0O  P8 0@0Q"<4H-3A&;J
+M2B[[SV8$2H5O""!#$*[__U*#* 4@!9"%+4#Z\& <4J[ZW$JN^MQO!$H49@@@
+M0Q"\ #!@!"!#$)Q2@U.$:N!*+OO19@8X?  !8 *9S! N^\Y)P"(,P(%G(B\N
+M^O1.N0  4)!83T'N^]0B Y*(T('0KOKP(@:2@"U!^OA)[OO48  ")$J%; 1Z
+M!F &2H5F GH!2B[[TV8T(&[_Z"U0^N M:  $^N10KO_H2&[VV! N^\])P"\ 
+M+P4O+OKD+R[ZX$ZY  !EKD_O !1@,BAN]K!V$-:,(&[_Z"C06*[_Z+G#9?)(
+M;O;8$"[[STG +P O!4AN]L1.N0  BCQ/[P 02>[VV PN "WVV&8,+7P  @5=
+M^O123& >2B[[TF<*+7P  @5?^O1@#DHN^]!G""U\  (%8?KT$"[ZZDB 0?D 
+M @7="#      9RHF#& *($,,$ !E9PA2@R!#2A!F\"!##!  968$$+P 12!#
+M2A!G$%*#8/8F#& "4H,@0TH09OA"KOKP2B[[T68$>@%@ GH $"[[SDG P(5G
+M  $.+R[Z]$ZY  !0D%A/(@.2C-"!(@:2@"U!^OA@  #P(&[_Z" 0'4#[U%BN
+M_^A)[OO40>P  28(8   U"!N_^@H4%BN_^A*A6H&*CQ_____2HQF!BAY  (%
+M)'@ 8 :XA6P(4H0=7/:O9O1*+OO19@1Z 6 ">@ 0+OO.2<# A6<(( :0A"U 
+M^OA33"8,F<1@?GH!+47_^&!V2>[ZZD'L  $F"&!J($U231U0^NH0+OKJ2<!X
+M>+"$8N!!^@ ^<A2P&%3)__QFTC [$@9.^P " G#Y>OK>_A[Y</F"^7KYBO]2
+M^7KZWORP_A[_UOEZ_];_POF"_V[Y>OF*>'5S;VYL:6AG9F5D8UA53TQ'140 
+M $JN^O!L!'H 8 0J+OKP2J[Z^&P$> !@!"@N^O@O+OKT3KD  %"06$\M0/:J
+M+R[Z[$ZY  !0D%A/G(6<@" #D(R<@)R$G*[VJDHN^]%F>F V4X=J+# K ! "
+M@    (1G"B '1("PJP ,;18G2@ $2%-.N0  *6)83R1K  0N$U.'%/P (%*"
+M4X9JQF \4X=J+# K ! "@    (1G"B '1("PJP ,;18G2@ $2%-.N0  *6)8
+M3R1K  0N$U.'(&[Z]!304H)2KOKT(&[Z]$H09KQ@-E.':BPP*P 0 H    "$
+M9PH@!T2 L*L #&T6)TH !$A33KD  "EB6$\D:P $+A-3AQ3\ #!2@E.N^OAJ
+MQ+G#9'!3AVHL,"L $ *     A&<*( =$@+"K  QM%B=*  1(4TZY   I8EA/
+M)&L !"X34X<4W%*"N<-ER& V4X=J+# K ! "@    (1G"B '1("PJP ,;18G
+M2@ $2%-.N0  *6)83R1K  0N$U.'%/P ,%*"4Z[Z\&K$8#Q3AVHL,"L $ * 
+M    A&<*( =$@+"K  QM%B=*  1(4TZY   I8EA/)&L !"X34X<@;OKL%-!2
+M@E*N^NP@;OKL2A!FO$HN^]%G/& V4X=J+# K ! "@    (1G"B '1("PJP ,
+M;18G2@ $2%-.N0  *6)83R1K  0N$U.'%/P (%*"4X9JQ@RN     ?_X9A @
+M;O_H(%!8KO_H(()"KO_X'!UF /($)TH !":',"L $ *     A&<P,"L $ @ 
+M  )F')7K  @O"DAX  HO*P (3KD  %*(3^\ #$J 9PI(4TZY   I8EA/,"L 
+M$ @   5G!'#_8 (@ DSN//SV@$Y>3G5.5O\<2-<\X$AX ,A"ITAN_SA.N0  
+M4#A/[P ,>O]\ "AN  A(>  E2%1.N0  80A03RX 9P  _E*'*$<O.0 "!3!(
+M5$ZY  !A6%!/+@ ,-  D> !F$DA43KD  %"P6$]3@"P 4H?9QWX ( ;E@$?V
+M"2#_."\Y  (%-$A43KD  &%84$_9P"1,4DP0$DG <G.P@6)@0?H :G(*L!A4
+MR?_\9E(P.Q(&3OL  O]Z !P )@ F "8 )@ F !8 .  R "P !P !8*X !P "
+M.GP  6 \.GP !& V.GP  V P.GP !F J" <  &<&.GP !V >.GP "& 8" < 
+M &?0.GP  F ,<W!N;&=F94=%*B4 2H9M#G(RO(%L"":-NH9L BH&4H982P@'
+M  %G /[\"H<    "8 #_0GX 2H5M4$ON_S@L+@ 0(D8BK@ ,2I5F$G(!*H%@
+M#%"N  Q@*%BN  Q@(B 54X!R!["!8A@P.PH&3OL  O_H_^C_Z/_B_^+_Z/_H
+M_^A2AUB&6$V^A6^X3.X\X/\<3EY.=4Y6_]Q(USSX)&X "'HR+ 4J;@ ,)BX 
+M$& ,NH-G  #R6)52A5*&*$IX & "4H:Z@V<  -A(>  E2%1.N0  80A03RX 
+M9P  Q%*'*$<O.0 "!3A(5$ZY  !A6%!/+@ ,-  D> !F$$A43KD  %"P6$\L
+M %*'V<>ZAF:R> %^ "\Y  (%/$A43KD  &%84$_9P"9,4DP0$TG <G.P@6)"
+M0?H 2'(*L!A4R?_\9C0P.Q(&3OL  O]V !P )  D "0 )  D !8 +  @ "  
+M!P !8*X !P "6)5@' @'  !0E6 4" <  %B58 QS<&YL9V9E1T4J)0!2A5*&
+M" <  6< _S *AP    )@ /]V2H1G /\,2H1F /\23.X\^/_<3EY.=4Y6__1(
+MUP# ?@!\ ")N  A@%%*&WH<B!^6!WH$2&4G!WH%R,)Z!$!%(@$'Y  (%W0@P
+M  (  &;:2H9G$@P1 "1F#"!N  P@AU))( E@ G  3.X P/_T3EY.=2)O  0@
+M+P (;S)"@0@O    !V<$$L%3@"! Y(A@ B+!4<C__$) 4X!D]" ("    6<"
+M,L$(    9P(2P4YU   B+P (9PX0 >&)$@#AB1( X8D2 ")O  0@+P ,;S (
+M+P    =G!!+!4X @0.2(8 (BP5'(__Q"0%. 9/0@" @   %G C+!"    &<"
+M$L$@+P $3G4     (&\ !")(<O]*&5?)__QF /_X4XF3R" )3G4       !.
+M5O_P2-< P")N  AR ! 12< N $'Y  (%W0@P  )X &9$0?D  @7="#   W@ 
+M9Q9221 12< N &#H<@%221 12< N & .( =\*["&9^Y\+;"&9^9!^0 "!=T(
+M,  "> !F!'  8#)\,)R'8 [<AB &Y8#<@' PD(?<@%))$!%)P"X 0?D  @7=
+M"#   G@ 9MQ*@68"1(8@!DSN ,#_\$Y>3G4       !.5O_\0?D  @7=T>X 
+M"! 0<@/ @4Y>3G5.5O_\0?D  @7=T>X "! 0<@' @4Y>3G5.5O_\0?D  @7=
+MT>X "! 0<@+ @4Y>3G5.5O_\0?D  @7=T>X "! 0<@3 @4Y>3G5.5O_\0?D 
+M @7=T>X "! 0<D# @4Y>3G5.5O_\0?D  @7=T>X "! 0<@C @4Y>3G5.5O_\
+M0?D  @7=T>X "! 0<A# @4Y>3G5.5O_\0?D  @7=T>X "! 0<@? @4Y>3G5.
+M5O_\0?D  @7=T>X "! 0 H    "73EY.=4Y6__Q!^0 "!=W1[@ ($!!R%\"!
+M3EY.=4Y6__Q!^0 "!=W1[@ ($!!R(,"!3EY.=4Y6__QP  RN    ?P (4\!$
+M $Y>3G5.5O_\("X "')_P(%.7DYU3E;_\$C7 , @;@ ($BX #RXN !!3AVL,
+M'!B\ 6;V4T@@"& "< !,[@# __!.7DYU3E;]O$C7 /!*.0 "LM!F!DZY  !@
+MDB@N  @J+@ ,9@ $ DJ$9@  EG@ ?@ L/  "LM J/  "LM\O!2\&3KD  &$H
+M4$]*@&824H=R#]J!W(%R!KZ!;>)*A&=82'D  K+02'D  J[$3KD  (OX4$]^
+M#P:'  *RT"P\  *S.4AY  ((5$AY  *NQ$ZY  "+T%!/+P=(>0 "KL1.N0  
+MB]!03WH/WH6^AF74(#P  J[$8  #GB \  *RT&   Y0@!"( Z8%$@-"!!H  
+M K+!8  #@$AX "\O!4ZY  !A"%!/2H!G  $V+P5.N0  4)!83WYXL(=N  ,8
+M+P5(>0 "KL1.N0  B_A03RX\  *NQ'P 2'D  @A6+P=.N0  89!03RX 9@  
+MMG  8  #)B\'2'@  4ZY  !2N%!/2H!F  "Z< !@  ,,+P=(>  "3KD  %*X
+M4$]*@&8  *!P &   O(O!TAX  -.N0  4KA03TJ 9@  AG  8  "V"\'2'@ 
+M!$ZY  !2N%!/2H!F;'  8  "P"\'2'@ !4ZY  !2N%!/2H!F5'  8  "J"\'
+M2'@ !DZY  !2N%!/2H!F/'  8  "D"\'2'@ !TZY  !2N%!/2H!F)'  8  "
+M>" &<@:P@6(6,#L*!D[[  +_0O]<_W;_D/^H_\#_V'X 4H9R![R!;0#_#DAY
+M  ((6$*G3KD  &&04$]*@&8  .)(>0 "LM!(;OW\+P5.N0  5Q!/[P ,/@!M
+M  ':2D=G,$AX 0%(;OW\2'D  @7<3KD  (M 3^\ #$AX 0%(;O[]2'D  @< 
+M3KD  (M 3^\ #$J$9@ !UDAY  *RWTAN_<PO!4ZY  !7<D_O  PN &=P($=*
+M$&=$2KD  @A(9PXO.0 ""$A.N0  ,!Y83R/'  ((2$AX #!![OW,3^__T")/
+M,#P "R+84<C__"\Y  ((1$ZY  "+0$_O #A*A&8  6Q(>0 "LNXO!4AX  -(
+M>0 ""%I.N0  6Y9/[P 0/@!L!G  8  !4DI'9PQ(QR\'3KD  #AV6$]*A&8 
+M 3!(>0 "LOU(;OW,+P5.N0  6&1/[P ,+@!G  #>($=*$&<T2KD  @A,9PXO
+M.0 ""$Q.N0  ,!Y83R/'  ((3$AX #!(;OW,+SD  @A$3KD  (M 3^\ #$J$
+M9@  U$AY  *S#"\%2'@ !4AY  ((8DZY  !;ED_O ! ^ &P,0GD  @@2< !@
+M  "T2D=G$D)Y  (($DC'+P=.N0  .'983TJ$9@  C$AY  *S&R\%2'@ !DAY
+M  ((:TZY  !;ED_O ! ^ &TT2D=G#$C'+P=.N0  .'983TJ$9E9(>0 "LRHO
+M!4AX  =(>0 ""'9.N0  6Y9/[P 0/@!L!'  8#Y*1V<N2,<O!TZY   X=EA/
+M8" @!'X'L(=B&# ["@9.^P "_)[]YOX\_J;^XO\^_X;_ND*G+P1.N0  4KA0
+M3TSN /#]O$Y>3G5.5O_\+H<O+@ 0+RX "$AX  %(>0 ""().N0  6Y9/[P 0
+M+@!O,DAX @(O+@ ,+P=.N0  BI9/[P ,#(    ("9PPO!TZY   X=EA/?O\O
+M!TZY   X=EA/( <N+O_\3EY.=4Y6_[1(UR#@+RX $"\N  A(>  "2'D  @B+
+M3KD  %N63^\ $"H ;0  ODJ%9@H@/  "")9@  "R2&[_Q"\%3KD  #B&4$]*
+M@&8  )P@+O_45( O $ZY   O"%A/+@!G  "&+R[_U"\'+P5.N0  BI9/[P ,
+ML*[_U&9B*FX #"P'W*[_U"!&$+P "E*&($9"$$A5+P=.N0  6C)03RP 9S)(
+M;0 $+P9.N0  6C)03RP 9R!(;0 (+P9.N0  6FA03TJ 9PXO!4ZY   X=EA/
+M( =@%B\%3KD  #AV6$\O!TZY   P'EA/< !,[B#@_[1.7DYU3E;_M$C7(. O
+M+@ 0+RX "$AX  1(>0 "")=.N0  6Y9/[P 0+ !M  &:2H9F"B \  ((HV  
+M 8Y(;O_$+P9.N0  .(903TJ 9@ !>" N_]14@"\ 3KD  "\(6$\J &<  6(O
+M+O_4+P4O!DZY  "*ED_O  RPKO_49@ !/BIN  PN!=ZN_]0@1Q"\  I2AR!'
+M0A!(;0 ,+P5.N0  6C)03RX 9P !"DAM ! O!TZY  !:,E!/+@!G  #V2&T 
+M%"\'3KD  %HR4$\N &<  .)(;0 8+P=.N0  6C)03RX 9P  SDAM !PO!TZY
+M  !::%!/+@!G  "Z2&T ("\'3KD  %HR4$\N &<  *9(;0 D+P=.N0  6C)0
+M3RX 9P  DDAM "DO!TZY  !:N%!/+@!G?DAM "HO!TZY  !;'%!/+@!G;$AM
+M "LO!TZY  !;'%!/+@!G6DAM "PO!TZY  !;'%!/+@!G2$AM "TO!TZY  !;
+M'%!/+@!G-DAM "XO!TZY  !:N%!/+@!G)$AM "\O!TZY  !:N%!/2H!G$B\&
+M3KD  #AV6$\@/  "LOU@%B\&3KD  #AV6$\O!4ZY   P'EA/< !,[B#@_[1.
+M7DYU3E;__"Z'+BX ""!N  P@ATAX  HO!TZY  !A"%!/+@!F!'  8 @@1T(0
+M4H<@!RXN__Q.7DYU3E;_^"Z'(FX "$H19PP@;@ ,((E@(DJ'9@1P & J<C"^
+M@6T.<CF^@6X(<C">@1*'8 02O !_4DD0$4G +@!R"KZ!9M)"&2 )+B[_^$Y>
+M3G5.5O_T2-< P")N  A*$6<@#!$ "F8*(&X #!"\ ']@-GP 8"!R,+Z!;09R
+M.;Z!;P1P & FW(8B!N6!W('<AWXPG(=221 12< N '(*OH%FU"!N  P0AD(9
+M( E,[@# __1.7DYU3E;_]"Z-*FX "$H59UP@;@ ,#!4 "F80$+P ?V!0$+P 
+M 6! 0A!@/")-4DT0$4G <D:P@6?N<DZP@6?H<E2P@6?<<EFP@6?6<F:P@6?6
+M<FZP@6?0<G2P@6?$<GFP@6>^< !@#@P5  IG!'  8 1"'2 -*F[_]$Y>3G5.
+M5OO<2-<@P"IN  @N+@ 0($=*$&9J2%5.N0  C'!83RX 9P8@1TH09E9(>0 "
+M"*1.N0  C'!83RX 9P8@1TH09CY*.0 "KK1F,$AY  ((J4ZY  ",<%A/+@!G
+M!B!'2A!F"$AY  ((M& "+P=(>0 "KK1.N0  B_A03RX\  *NM" N  PB .F!
+M1(#0@0:   *RP2\ +P=.N0  82A03TJ 9A0O!R\N !1.N0  B_A03W  8  !
+MR"\'3KD  %"06$]\#K"&;P9P_V   ;)(>0 ""+9(;OP 3KD  (OX4$](54AN
+M_ !.N0  B]!03TAY  ((PTAN_ !.N0  B]!03R\'2&[\ $ZY  "+T%!/0J=(
+M;OP 3KD  (LV4$\L &Q<#+D    "  ( 1&902'D  @C%2&[\ $ZY  "+^%!/
+M2%5(;OP 3KD  (O04$](>0 ""-Q(;OP 3KD  (O04$\O!TAN_ !.N0  B]!0
+M3T*G2&[\ $ZY  "+-E!/+ !*AFT.+P<O+@ 43KD  (OX4$\,K@    $ #&8 
+M .1(>0 ""-Y(;OP 3KD  (O04$]"ITAN_ !.N0  BS903RX <O^^@68*3KD 
+M &!.8   LDAX !A(;OOH+P=.N0  BI9/[P ,<ABP@6<63KD  &!.+P=.N0  
+M.'983W#_8   A$AN^^A(>0 "!N1.N0  B_A03R/N^_@  @;T2KD  @;X9PXO
+M.0 "!OA.N0  ,!Y83TJN^_QO5B\N^_Q.N0  +PA83RI +R[[_$A5+P=.N0  
+MBI9/[P ,L*[[_&<4+P=.N0  .'983TZY  !@3G#_8!(CS0 "!O@O!TZY   X
+M=EA/( 9,[B# ^]Q.7DYU0KD  @;X+P=.N0  .'983TZY  !@3G#_8-Q.5O_\
+M(#D  @A$3EY.=4Y6__!(UR# +#P  @CB+CP  @EH*GP  @F]2KD  @@"9@ !
+MV$AX +!.N0  +PA83R/   (( DJY  (( F=Z+P9.N0  4)!83U* +P!.N0  
+M+PA83R/   ((!F=<+P8O.0 "" 9.N0  B_A03R\'3KD  %"06$]2@"\ 3KD 
+M "\(6$\CP  "" IG+B\'+SD  @@*3KD  (OX4$](54ZY  !0D%A/4H O $ZY
+M   O"%A/(\   @@.9@9P &   41(52\Y  ((#DZY  "+^%!/+#D  @@&?@ @
+M>0 "" )(<'0 +P9.N0  6C)03RP 4D<,1P ,;>)^ "!Y  (( DAP=# O!DZY
+M  !:,E!/+ !21PQ'  QMXBPY  (("GX ('D  @@"2'!T8"\&3KD  %HR4$\L
+M %)'#$< !VWB?@ @>0 "" )(<'1\+P9.N0  6C)03RP 4D<,1P ';>(L.0 "
+M" X@.0 "" (&@    )@O "\&3KD  %HR4$\L " Y  (( @:     G"\ +P9.
+MN0  6C)03RP (#D  @@"!H    "@+P O!DZY  !:,E!/+  @.0 "" (&@   
+M *0O "\&3KD  %HR4$\L " Y  (( @:     J"\ +P9.N0  6C)03RP (#D 
+M @@"!H    "L+P O!DZY  !:,E!/(#D  @@"3.X@P/_P3EY.=4Y6  !(>0 "
+MKK1(>0 "!N1.N0  B_A03T*Y  (&]$JY  (&^&<.+SD  @;X3KD  # >6$]"
+MN0 "!OA"N0 "!OQ.7DYU3E;__"Z'?@!(>0 ""?8P!TC (@#I@42 T($&@  "
+MLM O $ZY  "+^%!/4D<,1P ';=9(>0 ""?A(>0 "!N1.N0  B_A03TAY  (*
+M $AY  *RP$ZY  "+^%!/(_P  @H"  *RL"/\  (*!@ "LK0N+O_\3EY.=4Y6
+M__0@;@ ($BX #[(09@0@"& &2AAF]'  3EY.=0  3E;_]"Z'(&X #")N  @>
+M&+X19@A*&6;V< !@"A 12< 2($G!D($N+O_T3EY.=0  3E;_]"Z-(FX ""!N
+M  Q@%BI(8 @0%; 19P9234H59O1*%6<&4DE*$6;FD^X "" )*F[_]$Y>3G5.
+M5O_X2-<@@"XN  AF!BXY  *O1$J'9Q8O+@ ,+P=.N0  85A03]"'*D!*%68$
+M< !@*"\N  Q(54ZY  "-"%!/+@!F"$*Y  *O1& ,($="$%*'(\<  J]$( U,
+M[B" __A.7DYU     $Y6_<A(US#@+"X $"UY  *S//_T?@$M1__X+4;__$AN
+M_=Q(;OW@2&[_]$AN  A.N0  <E8@;@ 8(*[]Y"IN !0J+@ <("[]X'X%L(=B
+M?# ["@9.^P " "X #  , $8 6 !8("[]Z-"&*H!*AF]62^[]["A%0?9I(/WL
+M+@@8W;O'9?I@0'X!*H=*AF\X*D4H1MG%&OP ,+O,9?A@*$*5+CD  @H@<@B\
+M@6T,? A@"D*5+CD  @H<? ,J1RA%WH88W;O'9?H@14(P:  @!4SN,.#]R$Y>
+M3G5.5OW(2-<@\"HN ! M>0 "LSS_]$*N__@M1?_\2&[]W$AN_>!(;O_T2&X 
+M"$ZY  !R5B!N !@@KOWD*"X '"XN !0@+OW@? 6PAF(  +(P.PH&3OL  @!$
+M  P # !R (8 ADJ%;0P@1R N__"0A2" 8 8@1R"N__!^ $ON_>PL!& (($80
+MG5*'4H:^KO_P;?(@1-'N__!"$&!D($="D"!$$+P ,#I\  &ZC6\6?@'>A-J$
+M+ 4@1Q"\ #!235*'OH9E\D(U2 !@-B!'0I L.0 ""B!^"+J';0YZ"& ,($="
+MD"PY  (*''H#+@8J1-R%($<:T%*'OH9E]B!$0C!8 " $3.X@\/W(3EY.=4Y6
+M_^!(USS@*&X #"XN !1.N0  7C8@0"!0'! J1TJL  1G  & ($<0O  M4H<J
+M1V   7(:_  P2H5G  &.&L:9S%-*+@JYQVP  8 :_  P4DQ@\GX(M<=L""AY
+M  (*.& .*'D  @HT8 8H>0 ""CQ*%&<  58:W&#V2JP "&X.( I6@$2 L*P 
+M"&\  )H:[  ,&L8V?  !?@%@!AK24DM2AT7T> Q*$F;R2H5F# PE #!G^KP5
+M9P)231K\ &4H;  (V<M33$J,:P8:_  K8 H:_  M( Q$@"A 2&[__'  , PO
+M $ZY  !XD%!/?@!)[O_\8 12AU),#!0 ,&?V? *^AF\$?@)@"'P#OH9N  "\
+M2?9X_$'N__Q62"X(&MRYQV/Z8   IG !D(JPK  (;C9^ "9'8 @:]+@,4H=2
+M2R *T*P "+Z ;>X:QB9'2C2X#&= OHIL/"X+)DH:]'@,4H>^BVWV8"P:_  P
+M&L9^ & &&OP ,%*'("P "-"*1("^@&WN?@!@!!K34H=']'@,2A-F]$J%9C0,
+M)0 P9_J\%6<J4DU@)B1N  @J+@ 0(!1^!;"'8@#^QC ["@9.^P "_G;^O/Z\
+M_I;^K/ZL0A5,[CS@_^!.7DYU3E;]W"UY  *S//_T<@$M0?_X+6X $/_\2&[]
+MW$AN_>!(;O_T2&X "$ZY  !R5D_O ! O+@ 8+RX %$AN_> O+@ 03KD  &/8
+M("X &$Y>3G5.5O_\+RX %$*G+RX $"\N  PO+@ (3KD  &6N3EY.=0  3E;_
+M\$C7(, J;@ ,+"X &!XN !<,!P P9@9*AF<  ,XB;@ 0<@&#D2!N  @@$'(#
+ML(%B7C ["@9.^P "  @ L !0 $@,!P U;0  H@P' #5N0$J&9CQ*K0(0;P  
+MD$'M  P@+0(0$# (_TG ?C"0AW(!2H!L"$2 P(%$@& "P(%*@& ,2JT !&9B
+M8 9*K0 $9UHN+0(04X<L!V ,2H=M$A*\ #!3AU.&0_5H# P1 #EGZDJ';092
+M-7@,8$(;?  Q  P@;@ (#*@    !  1F!E*M  A@*$JM A!O"B M A ;O  P
+M" Q2K0(08!)*K0(0;@P;?  P  Q^ 2M' A @+0(00C4(#$SN(,#_\$Y>3G5.
+M5OLL2-<XP#U\ 0#]^#U\ 0#[\$AN^^Q(;OWX+RX "$ZY  !^BD_O  Q*KOOL
+M:B!(;OOJ("[[[$2  H   /__+P!(;OWX3KD  'RV3^\ #$AN^_!(;OWX3KD 
+M '_*4$]*KOOL;@I![OOP+4C[Y&!T2&[[Y"\N  PO+OOL2'@  DAN^_!.N0  
+M@3)/[P 4("[[Y&<H?@&PAV9*+R[[[$AY  (*7$AN^Y1.N0  BO!/[P ,2&[[
+ME$AX ")@("\N^^Q(>0 ""G%(;OM$3KD  (KP3^\ #$AN^T1(>  ,3KD  (#N
+M4$](;OM (&[[Y'  ,"@  D'P"@9P # H__XO $ZY  !XD%!/?@!+[OM 8 12
+MAU)-#!4 ,&?V)FX $)O-? .^AFX>0?9Y(/M +@@H2T'N^T!62"P(($<8T%*'
+M4DV^AF/T(&[[Y'  ,"@  E6 +@!M)N.'0?/8 "P(+P8@;OOD<  P,'@&+P!.
+MN0  >)!03UA-6(95AVKB0C/8 "!N !@@C2!N^^0P*  $2, @;@ 4((!![OOP
+M("[[Y+"(9PHO $ZY  " TEA/3.XXP/LL3EY.=4Y6^R1(UR#\*FX %"HN ! L
+M+@ ,+BX ""!N !A"D"!'2J@ !&8T?@ H#6 *($00O  P4H=2A+Z%8_)!]7@ 
+M*@A@"B!%$+P ,%*'4H6^AF/R(&X '""'8  "=CU\ 0#]^#U\ 0#[\$AN^^Q(
+M;OWX+P=.N0  ?HI/[P ,/6[[[OW\=!&4KOOL<@ R+OWZZ8F4@4P\( (  $T1
+M<A#BJM2&M(5D B0%+@6\AV,"+@9,/'@'  -2:@:'  :DU'(0XJ=2AT2'2&[[
+MZ"\'+P)(>  *2&[]^$ZY  "!,D_O !0@+OOH9R9^ ;"'9D8O DAY  (*ADAN
+M^YA.N0  BO!/[P ,2&[[F$AX ")@'B\"2'D  @J<2&[[2$ZY  "*\$_O  Q(
+M;OM(2'@ #$ZY  " [E!/(&[[Z QH__  !&YV,"@ !$C 1(!J!'X/T(?H@"@ 
+M?@!\ & .(&[[Z$IP: 9F"%*'5(:^A&WNOH1L"B!N^^@ <  !2@8N!"P$XX8J
+M!..%( :0A2H 8! @;OOH,;!H!E@&4H=4A52&(&[[Z'  ,"@  KZ 9>*9:  "
+M(&[[Z.F$V6@ !"!N^^A*:  $;#!(;OM&,"@ !$C 1( "@   __\O "\(3KD 
+M 'RV3^\ #$IN^T9G"B!N^^@ :  !  9(;OOP+R[[Z$ZY  !_RE!/?@ ^+OOR
+M4X<L!^.&0?9I(/OV+ A@!%.'588@1DI09_9(;OM <  P-GL@^_8O $ZY  !X
+MD%!/>@!![OM + A@!%*%4H8@1@P0 #!G]'P > .ZA&XB0?99(/M *@@H#4'N
+M^T!62"8(($0B11"14H52AE*$NH-C\%.':S+CAT'V>2#[]BX(0?5H "H(0>[[
+M]B@(+P4@1W  ,! O $ZY  !XD%!/6(98A56'OH1DY$(U:  @;@ <((8@;@ 8
+ME(8@@D'N_?@@+OOHL(AG"B\ 3KD  (#26$],[B#\^R1.7DYU3E;J0$C7./PF
+M;@ 0+BX "'8P0J[__"!')U  !":H  0,J     ( !&<,#*@    !  1F  9>
+M*&X # RL   "   (;!0,K     $ !&86#*P    !  AL#"!N !1^"(^08  &
+M,$'N_]PB1S \  <@V5'(__Q![O_<0^[_O# \  <BV%'(__P,KO______Y&X(
+M0J[_X&   2P,K@   )__Y&T(0J[_P&   -X@+O_D<A]*@&P(1(# @42 8 + 
+M@7X?L(=F1" N_^12@&H"T(?J@"P ?@!+[O_(8 1"G5*'OH9E^'P%OH9L  "2
+MY8=!]GCH+@A![O_H0>@ %"P(($="D%B'OH9E]F!R("[_Y%* :@1^']"'ZH L
+M 'X 2^[_R& $0IU2A[Z&9?@@+O_D<A]*@&P(1(# @42 8 + @7(?DH!P >.@
+M4X N!N6'P;9XR$: P;9XZ%*&+@9\!;Z&;!SEAT'V>.@N"$'N_^A!Z  4+ @@
+M1T*06(>^AF7V2&[_O$ZY  !S:%A/2J[_X&<V#*P    !  1F""XL  A2AV &
+M+CP  !-$2&[L<$AN['1(;NQX+P=(;O_<3KD  &<P3^\ %& (0J[L<$*N['0D
+M+NQPU*[L='@ 2JP !&8&2JP "&P4#*P    !  1F:B L  A2@+"";V ,K   
+M  $ !&8:+BP "%2'GH(,AP   @!C!BX\   " 'P!8!9^ "PL  A4A@R&   "
+M &,&+#P   ( 2&[J:$ANZFQ(;NIP+P8O!TAN_[Q.N0  :.)/[P 8*"[J;-BN
+MZF@,K     $ !&8  @ J+NQPNJP "&\$*BP "'X 2H5O'$OK  Q![NQX+ A!
+M[NQXVH@@1AK04H=2AKR%9?0J;NQPV^[L=+OL  AO!"IL  B^C6P80>L #"P'
+MW(C;R"!&$+P ,%*'4H:\C67ROJP "&8  *0G1P(0( *0AR=   B^@FQ,OJ[L
+M<&0*%C9Y(.QX4H=@ G8P0?9Y(.QX+ A@"KZN['!D#%*'4H8@1@P0 #!G[KZN
+M['!D!GX!+4?__$JN_\!G  $N?@$M1__\8  !)$JN_\!G  $<2J[J;&\&=C!\
+M & &%B[J<'P!+@9!]FD@ZG L"& (OH1L#%*'4H8@1@P0 #!G\+Z$;   Z'X!
+M+4?__&   -XJ+  (FH=*AV8>? !+[NIP8 12AE)-#!4 ,&?VVH;:KNILW*[J
+M;& "? "ZA&\"*@0@!42 )T  "+JNZFQO!B@NZFQ@ B@%O(1L$DOK  S;QQK\
+M #!2AU*&O(1M]+R%;!I+ZP ,V\<@!I"NZFP:]@D@ZG!2AU*&O(5M[)RNZFR\
+MKNIH;#I*AFP$=C!@!A8V:2#J<%*&:@)\ $OV:2#J<& *O*[J:&P*4H9230P5
+M #!G\+RNZFAL(GP!+4;__& :0>L #"P(W(=@"B!&$+P ,%*'4H:^K  (;? G
+M1P(0+R[__$G#+P,O+@ 42%-(5$ZY  !F(&   C9*K  (;0 !'B "T*P " R 
+M   " &P ^^1^ $OK  Q![NQX+ A@""!&&M!2AU*&OJ[L<&7ROH)L&DOK  Q!
+M]7@ + C;PB!&$+P ,%*'4H:\C67R*@2XK  (;P0J+  (NJ[J;&\&*"[J;& "
+M* 5\ $J$;Q)+ZP ,V\<:_  P4H=2AKR$;?2\A6P:2^L #-O'( :0KNIL&O8)
+M(.IP4H=2AKR%;>Q+ZP ,V\=@"!K\ #!2AU*&O*P "&WR)T<"$)2')T( ")RN
+MZFPN!KZNZFAL/$J'; 1V,& &%C9Y(.IP4H=J GX 0?9Y(.IP+ A@"KZNZFAL
+M#%*'4H8@1@P0 #!G[KZNZFAL!GX!+4?__"\N__Q)PR\#+RX %$A32%1.N0  
+M9B!@  $2+"P "$2&#((   ( ; #ZR R&   " &P ^KZTAFXZM(9F"!8N['A^
+M 6 $=C!^ $OV>2#L>& *OJ[L<&0*4H=230P5 #!G\+ZN['!D!GX!+4?__$*K
+M A!@;GX 0>L #"@&2^[L>"H(8 @@11"=4H=2A2 N['"0A+Z 9>Y^ $OK  R4
+MABH"8 8:_  P4H>^A6WV)T<"$+ZN['!D+!8V>2#L>%*'2_9Y(.QX8 J^KNQP
+M9 I2AU)-#!4 ,&?POJ[L<&0&?@$M1__\2J[_P&<&?@$M1__\+R[__$G#+P,O
+M+@ 42%-(5$ZY  !F("XK A!)ZP ,V<=@!AC\ #!2AR K A#0AKZ ;?!"JP (
+M)T<"$$(S> Q,[CC\ZD!.7DYU3E;_U"Z-*FX $"!N !1"D"!N  @M4/_X+6@ 
+M!/_\Z>X  ?_X*T  !"\N  A.N0  =,!83RJ (!5R!;"!8A0P.PH&3OL  @ P
+M  P #  P #  ,$AN__A(;O_83KD  '5X4$\O+@ 42%4O+@ ,2&[_V$ZY  !K
+MNBIN_]1.7DYU3E;_O$C7., H;@ ((&X %$*0?@!+[O_P0>[_\$'H ! L""KT
+M> !8A[O&9?9@%# ["@9.^P " %  +@ N %  4 !0)FX $.GN  '_\"=   1(
+M5$ZY  !VHEA/)H @$WX%L(=CRDA42&[_T$ZY  !W1%!/+RX %$A3+RX #$AN
+M_]!.N0  :[I,[CC _[Q.7DYU     $Y6_]A(UP#X(&X " RH     @ $9@ !
+M(GX 8 @,1P %9 Q21W  , =*L P,9^X,1P %90A"J  $8   _DI'9UI"KO_\
+M>@ Z!W@%F(63R6 .W(4AL&P,F Q2KO_\6$DL+O_\O(1EZ@RN    !?_\;!SE
+MABU&__0@+O_T0K (#%BN__0,K@   !3_]&WJ<  P!^N(D:@ "& "4D=P # '
+M<@22@")!2K"<#&?N0F[_^BXH  P,AP  __]B"' 0X:\]0/_Z#(< ____8@;A
+MCU!N__H,AP____]B!NF/6&[_^@R'/____V(&Y8]4;O_Z#(=_____8@12;O_Z
+M<  P+O_ZD:@ " QN  '_^F4N? !*B6TH<  P+O_Z=B"6@"X)Y8=#\'@,*A$R
+M+O_ZXZTH$>:LC(4BABP$68=JYDSN /C_V$Y>3G5.5@  < $R+@ *XZ"!N0 "
+MLT1.7DYU3E;_]"!N  @M4/_X+6@ !/_\,"[_^ ) ?_!F&B N__@"@  /__]F
+M"DJN__QF!'  8$1P 6! ,"[_^ ) ?_ ,0'_P9C @+O_X H  #___9@I*KO_\
+M9@1P V <("[_^ *   ___PR   0  &4$< 1@!G %8 )P DY>3G5.5O_D2-< 
+M\'P (BX #" N  A^#-"'>""8@3!\ !#1P"X0XZ\J$.BMC(<@ABP%64BQP&3L
+M3.X \/_D3EY.=4Y6__!(UR" *FX ""!N  PM4/_X+6@ !/_\Z>X  ?_X*H K
+M;O_\ !!^"$*U> Q8AW(4OH%M]# N__@"0'_P9VPP+O_X D!_\ Q ?_!G  "2
+MZ>X 2__X!(    /_*T  "'X"*T< !" N__@"@  /__\ @  0   K0  ,2'@ 
+M"TA53KD  '4Z4$]@&$JN__QF7'X#*T< !& *2J[__&8:0JT !$SN((#_\$Y>
+M3G4@+O_X H  #___9^!^ BM'  0K?/___ T "" N__@"@  /__\K0  ,2%5.
+MN0  <VA83V#"("[_^ *   ___V>>("[_^ *   ___P@  !-G"'X$*T< !& 2
+M?@0K1P $2'@ !$ZY  !TJEA/("[_^ *   ___P"   @  &  _TY.5O_@2-< 
+MP")N  A\ $'N__ N"$'N__!!Z  0(@@@1R"Q: !8AEB'OH%E\C N__ "0'__
+M9THP+O_P D!__PQ ?_]G1G "8"YP!& J2J[_]&8^2J[_^&8X2J[__&8R< -@
+M%$JN__1F'DJN__AF&$JN__QF$G  3.X P/_@3EY.=4IN__)GW' !8.Q*;O_R
+M9[QP # N__(,@   @ !DJG %8-1.5O_<2-<PX"AN  Q\ $'N__ N"$'N__!!
+MZ  0*@@@1R"T: !8AEB'OH5E\BIN  CI[@ !__ J@"MN__0 $"MN__@ %"MN
+M__P &'X00K5X#%B'?!2^AFWT,"[_\ ) ?_]G8# N__ "0'__#$!__V<  (IP
+M # N__ "0'__!(   #__*T  "'X"*T< !'  ,"[_\@"   $  "M   Q(>  /
+M2%5.N0  =3I03V ,?@,K1P $8 1"K0 $3.XPX/_<3EY.=7  ,"[_\H"N__2 
+MKO_X@*[__&?>?@(K1P $*WS__\ 1  AP # N__(K0  ,2%5.N0  <VA83V"^
+M<  P+O_R@*[_]("N__B KO_\9YX(+@ '__)G"'X$*T< !& 2?@0K1P $2'@ 
+M!$ZY  !TJEA/<  P+O_R $"  "M   Q(>  08 #_7        $Y6__1(UP# 
+M? ,@;@ ,/BX "G  , <N $Q\  $    *<##2@!&!8 !,?' '    "E'._^!,
+M[@# __1.7DYU3E;_W$C7./Q\ '@ >@ H;@ 0=@ V+@ *) -3@BIN  Q@,"\&
+M( *0AS T"@ "@   __\O '  ,!4O $ZY  !Y^$_O  PN +Z&9 )21"P'4H54
+M32X%OH-ERB9N !0P//__P$8V@'(0XJXW1@ "-T0 !$SN./S_W$Y>3G5.5O_<
+M2-<X_'X > !\ "AN !!V #8N  HD U."*FX #& X+P<@ I"%,#0*  *   #_
+M_R\ <  P%2\ 3KD  'GX3^\ #"X #(>RT%X 90A21 2'LM!> %*&5$TJ!KJ#
+M9<(F;@ 4( =,?  !   G$#:!3'QP!P  )Q @!TQ\  $  "<0-T$  DQ\< < 
+M "<0<  P!$2 Y8@B -*!T('0AS=   1,[CC\_]Q.7DYU     $Y6__PP+@ *
+MP.X #M"N !!.7DYU3E;_^$C7 (1^ #XN  K>K@ ,( =,?      G$'(0XZA,
+M?' "   G$(""3.X A/_X3EY.=4Y6__@NARXN  AG&"!N  QP # 0WH P//__
+MP$<PP'(0XJ]F["XN__A.7DYU3E;_^$C7(( N+@ (9R0J;@ ,+P=P # 5+P!.
+MN0  >@Q03RX ,#S__\!'.L!R$.*O9N!,[B" __A.7DYU3E;_^$C7 (0P+@ *
+MP.X #M"N ! N $Q\     "<0<A#CJ$Q\< (  "<0@(),[@"$__A.7DYU3E;_
+M_# N  K [@ .3EY.=4Y6__A(UP"$,"X "L#N  XN $Q\     "<0<A#CJ$Q\
+M< (  "<0@(),[@"$__A.7DYU3E;_^$C7 (0^+@ .<  P+@ *[ZC0K@ 0+@!,
+M?      G$'(0XZA,?' "   G$(""3.X A/_X3EY.=4Y6__PP+@ *P/PG$-"N
+M  Q.7DYU3E;_^$C7 (1^ #XN  IR$..OWJX #" '3'P     )Q!R$..H3'QP
+M @  )Q" @DSN (3_^$Y>3G5.5O_X2-< A"XN  @@!TQ\     "<0<A#CJ$Q\
+M< (  "<0@(),[@"$__A.7DYU3E;_Y$C7,/ H;@ (."P  GX ? !+[  &>@ Z
+M+@ .<  P!"@ 8"0O!R\%<  P%2\ 3KD  'L@3^\ #"X ,#S__\!'.L!R$.*G
+M4H:\A&782H=G)DOL  8J!N.%V\4O!TZY  ![IEA/+@ P//__P$<ZP%*&<A#B
+MIV;D.48  DSN,/#_Y$Y>3G5.5O_D2-< ^"!N  @^*  ">@!\ #8N  Y#Z  &
+M>  X!V 8?@ ^$>>OWH4P//__P$<RP'(0XJ\J!U*&O(1EY$J%9PPP//__P$4Q
+M@&H&4H8Q1@ "3.X ^/_D3EY.=4Y6_^A(UP#T(FX "'P >@ Z*0 "4X5K.%Q)
+M+@EP # N  YX$)B XX7:AR)%*@=^ #X1Z:]T$.6NWH8@!W(0XJ@R@ *'  #_
+M_RP'54FSQ63>(&X $#"&3.X ]/_H3EY.=4Y6_^A(US#@?@!\ "AN  A+[  &
+M>@ Z+@ .8"0O!R\%<  P%2\ 3KD  'JH3^\ #"X ,#S__\!'.L!R$.*G4H9P
+M # L  *\@&722H=G)DOL  8J!N.%V\4O!TZY  ![IEA/+@ P//__P$<ZP%*&
+M<A#BIV;D.48  DSN,.#_Z$Y>3G5.5O_D2-<P^"AN  @^+  "?  J+@ 02^P 
+M!G@ ."X #G8 -@=@)"\%+P1P # 5+P!.N0  >?A/[P ,*@ P//__P$4ZP'(0
+MXJU2AKR#9=A*A6<,,#S__\!%.8!J!E*&.48  DSN,/C_Y$Y>3G5.5O_D2-<P
+M\"AN  @X+  "?@!\ $OL  9Z #HN  YP # $* !@)"\'+P5P # 5+P!.N0  
+M>R!/[P ,+@ P//__P$<ZP'(0XJ]2AKR$9=A*AV<F2^P !BH&XX7;Q2\'3KD 
+M 'NF6$\N # \___ 1SK 4H9R$.*O9N0Y1@ "3.XP\/_D3EY.=4Y6_]A(USC 
+M?@,B;@ (2^D #'P,+4;__-O&8 13AUE-2I5G^"9N  Q*AVU 0>D #$*N__0@
+M!^. D*[_]"U __@J2"P'Y8;<B" N__A)\PH&(!4"@   __\X@" =<A#BJ#E 
+M  )5KO_XN\9CW..'5(<W1P "2FL !F8H.'P  3I\  )@#D'K  8QL]@&V/Y2
+M3%1-( QR #(K  *P@67F4VL  B I  A2@'( ,BL  NF)D($@;@ 0((!":P $
+M3.XXP/_83EY.=4Y6_^Q(US#@?  H;@ (+BX #$OL  9@("\'<  P%2\ 3KD 
+M 'MN4$\N # \___ 1SK <A#BKU*&<  P+  "O(!EUDJ'9R9+[  &*@;CA=O%
+M+P=.N0  >Z983RX ,#S__\!'.L!2AG(0XJ]FY#E&  ),[C#@_^Q.7DYU3E;_
+M\$C7,, H;@ (*FX #$'L  8L"'  ,"P  B!&,# *_@*   #__X#\)Q!(0#M 
+M  9P # L  (R+0 &LG *_F8(.WP  0 "8" [?  "  )P # L  (@1C P"OX"
+M@   __^ _"<0.T  "'X /BP  E6':QSCA]Z&($=P # 0+P!(54ZY  !_4%!/
+M58>^AF3H?@!@$$*G2%5.N0  ?U!03WP0WH8P+  $2,!\$)"&OH!OXC L  1(
+MP+"';QHP+  $2,"0AP*   #__R\ 2%5.N0  >]103T)M  1,[C# __!.7DYU
+M  !.5O_P,"X $G( 2D!G$"!N  PB;@ (,MA20;) 9?A.7DYU3E;__"Z-*FX 
+M"$A53KD  # >6$\J;O_\3EY.=4Y6_V C[@ (  ( 1"\N  Q(>  O2'D  @K>
+M2'D  @JT2&[_8$ZY  "*\$_O !1(;O]@3KD  (S@6$].N0  C!!.7DYU3E;_
+M:$C7//PJ;@ (*"X %$)N__XM3?_X2H1M"G[_+4?_]&   /1$A$*N__1@  #J
+M/7P "O_R/7D  G9._^P]>0 "BM#_[CUY  (PSO_P+7P  G90_^ M?  "BM+_
+MY"U\  (PT/_H0J[_U$*N_]A"KO_<+7P  G9V_\@M?  "H=;_S"U\  )V"/_0
+M( 12@&H"5H#D@%2 /4#_QF   ) ]?  "__(]>0 "=BS_[#UY  )VFO_N/7D 
+M @M4__ M?  "=B[_X"U\  )VG/_D+7P  @M6_^@M?  "=CC_R"U\  *)8O_,
+M+7P  C"0_] M?  "=D3_U"U\  **&O_8+7P  C"P_]P@!%* :@1^#]"'Z(!4
+M@#U _\9@%" N  Q^ K"'9P#_#GX*L(=G /]T+"X $$'N_^PN"$'N_[@J"$'N
+M_^Q<2"@(($=P # 0(@9,0!  ($4P@"!'<  P$$Q 8 94A52'OH1EWGX"+4?_
+MM'@$0?9(N"@(8 P@1$I09@Q3KO^T581*KO^T;.Y*AF\R+P9P # N_[PO '  
+M,"[_NB\ <  P+O^X+P!(>0 ""N1.N0  BJ @;@ 8?@$@AV  !78\+0 "0>[_
+MN"X(0>[_R"H(0>[_N%Q(* @@1W  ,! @12!00? * ")'<  P$2)%(E%#\0H 
+M,"D  I!0W$!4AUB%OH1EU+QN_\9D!#U&_\:\56(((&X &""-8'!X #@&!(0 
+M  $ XXP&A    @8O!$ZY   O"%A/* !F"B!N !A"D&  !/(@;@ 8((1P # M
+M  (O $AM  8@;@ 8(!!<@"\ 3KD  ("P3^\ #"!N !@@4#%M  (  B!N !@@
+M4#%M  0 !"!N !@J4#J&0J[_P$JN_[1K  1&<  P+O_R+4#_D'  ,"[_QBU 
+M_Z!![O_@+4C_F$?N_[A%[O_(0>[_U"U(_Y1*4V<  _AP # 3(%(P, H" H  
+M /__<@ R$R!2,C :  *!  #__Y"!+4#_L'  ,"T  BU _ZQ*KO_T;"Q@.C M
+M  1(P$2 :@1^#]"'Z( M0/_T8"0P+0 $2,!$@&H"5H#D@"U __1@$" N_Y!^
+M K"'9\Q^"K"'9]P,;@ "__)F*G  ,!,@;O^4(%!!\ H ,!#1;O_^<  P$R!N
+M_Y0@4$'P"@ P$.E(T6T ! RN     ?^P9UP,K@    '_K&=F("[_D'X"L(=G
+M  #0?@JPAV<  ,Y@  #0<  P$R\ 2%5.N0  ?@103V   Q1"IW  ,!,@;O^8
+M(%!!\ H <  P$"\ 2%5.N0  ?9A/[P ,8  "[B N_Y!^ K"'9]!^"K"'9[9@
+M  +:/"T !B\N_[!P # 3(%(P, H  H   /__(&[_F"!02' * $AM  9.N0  
+M@+!/[P ,.V[_L@ "("[_D'X"L(=G''X*L(=F  *2<  P!B\ 2%5.N0  ?190
+M3V   GY"IW  , 8O $A53KD  'V83^\ #&   F9";O^J8 8]?"<0_ZH@+O^L
+ML*[_L&4$("[_L%: D6[_JB@N_ZS8KO^P0?5*!D)H__XL!%6&:P !M'  ,"[_
+M_B(N__22@"U!_YPV!"0N_ZQ3@B@&XX0N!IZN_[!2ARH"<  P$R!2,# *  * 
+M  #__RAN_Y@H5$GT"@"\@FP"*@9*AVP  -)^ &   ,Q(;O^D( :0A4AT"@!(
+M=7H&FH=2A0*%  #__R\%3KD  'C.3^\ $$IN_ZAG&$'U2 9(:  $<  P+O^H
+M+P!.N0  >D!03TIN_Z9G  "20?5(!DAH  )P # N_Z8O $ZY  !Z0%!/8'9(
+M;O^D( :0A4AT"@!(=7H&FH=2A0*%  #__R\%3KD  'E(3^\ $$IN_ZAG&$'U
+M2 9(:  $<  P+O^H+P!.N0  >FQ03TIN_Z9G+$'U2 9(:  "<  P+O^F+P!.
+MN0  >FQ03V 2("[_D'("L(%G /\L<@JP@6>*2?5(!CBN_Z0^ W  , -!]0H&
+M2FC__F8$/@-31[YN_\9C#'  , >0KO^@.@!@ GH ("[_P+"N_[1F0"X&5(=P
+M # %OH!B-# L  *P;O^J8BIP # L  )R #(4@(%G'#H'2J[_]&T&OJ[_G&X.
+M<  P!0!U  $*!CP%8 Q3AE6$2H9J /YL?  @+O^LT*[_L#M   )P # M  )!
+M]0H&2FC__F8(4VT  F "4D9P # &0?4*!BX(2E!G\$I&9T)X #@&<  P+0 "
+MD(0O "\'2&T !DZY  " L$_O  R=;0 "("[_D'X"L(=G"'X*L(=G"& .( 3I
+MB& $( 3EB-%M  12KO_ 5$M8KO^46$I8KO^8("[_P+"N_[1O /OJ("[_^+"-
+M9U(@0# M  *P4&)((&[_^#%M  (  B!N__@Q;0 $  1P # M  (O $AM  8@
+M+O_X7( O $ZY  " L$_O  P@;@ 8+Q!.N0  @-)83R!N !@@KO_X3.X\_/]H
+M3EY.=0  3E;]R$C7,. L+@ ,+7D  K,\__1^ 2U'__@M1O_\2&[]W$AN_>!(
+M;O_T+RX "$ZY  !RU"!N !0@KOWD*FX $"HN !@@+OW@?@6PAV)\,#L*!D[[
+M  ( +@ ,  P 1@!8 %@@+OWHT(8J@$J&;U9+[OWL*$5!]FD@_>PN"!C=N\=E
+M^F! ?@$JATJ&;S@J12A&V<4:_  PN\QE^& H0I4N.0 ""RAR"+R!;0Q\"& *
+M0I4N.0 ""R1\ RI'*$7>AAC=N\=E^B!%0C!H " %3.XPX/W(3EY.=4Y6_<Q(
+MUR#@+"X #"UY  *S//_T0J[_^"U&__Q(;OW<2&[]X$AN__0O+@ (3KD  '+4
+M(&X %""N_>0J+@ 8+BX $" N_>!R!;"!8@  GC ["@9.^P " $0 #  , '  
+MB@"*2H9M#"!'("[_\)"&((!@!B!'(*[_\'X 2^[]["P%8 @@1A"=4H=2AKZN
+M__!M\B!%T>[_\$(08% @1T*0($40O  P.GP  ;R-;Q1^ =Z%W(4@1Q"\ #!2
+M35*'OH9E\D(U6 !@)"!'0I!^"+R'; @J/  ""SE@$BH\  (+/6 *($="D"H\
+M  (+1B %3.X@X/W,3EY.=4Y6_=PM>0 "LSS_]'(!+4'_^"UN  S__$AN_=Q(
+M;OW@2&[_]"\N  A.N0  <M1/[P 0+RX %"\N !!(;OW@+RX #$ZY  !CV" N
+M !1.7DYU     $[Y   FX$AX  -.0&7R3G5.5O_\+H=![@ ,+@@P.0 " L (
+M   !9AHP.0 " L (   (9PH >0 "  ("P& $</]@$DAY  ("L"\'+RX "$ZY
+M   ]X"XN__Q.7DYU     $Y6_^@M?'______["UN  C_\"UN__#_]#U\ $+_
+M_$AN_^Q(;@ 0+RX #$ZY   ]X"!N__!"$" N  A.7DYU  !.^0  )N!(>  %
+M3D!E\DYU(F\ !"!O  @@+P ,;TPB"9*(;   !$2!LH!M  !$,@@( 0  9P02
+MV%. (@D( 0  9AXB .2(8 (BV%'(__Q"0%. 9/0@ 0*      V "$MA1R/_\
+M0D!3@&3T("\ !$YUL\AN%& "$MA1R/_\0D!3@&3T("\ !$YUT<#3P& "$R!1
+MR/_\0D!3@&3T("\ !$YU(&\ !")O  @@"'+_2AA7R?_\9@#_^%.(<O\0V5?)
+M__QF /_X3G4  "!O  0B;P (( AR_Q#95\G__&8 __A.=4Y6__PNAT*G2'@ 
+M!DZY  "-4%!/+@!G$"\'2'@ !DZY  "-4%!/8!A2N0 ""TP,N0    $  @M,
+M9@9.N0  )O!(>  &3KD  (U&+P!.N0  C>Y03RXN__Q.7DYU     $Y6__1(
+MUS" *GD  @  2HUG'"AN  A*E6<4+QU(5$ZY  ",JE!/+@!G[" '8 )P $SN
+M,(#_]$Y>3G5.5O_T(&X #")N  @2&+(19@H,&0 ]9O0@"& 22A%F# PH #W_
+M_V8$( A@ G  3EY.=0    !.5@  2'D  @+$3KD  ">46$\O+@ (3KD  (WX
+M6$].7DYU        3E;_\"Z-(&X #")N  @J2& ($!6P$6<&4DU*%6;T2A5G
+M!" )8 9*&6;D<  J;O_P3EY.=0    !.^0  )N!(>  43D!E\DYU3E;_W$C7
+M,( N+@ (+6X #/_T( ?E@"I !H   J],*$ M5/_XV_P  J_,+57__$AN_^A(
+M;O_T+P=.N0  -Z!/[P ,2H!K0" N__BPKO_L9@H@+O_\L*[_\&<P+6[_[/_X
+M**[_^" N__!R^\"!+4#__"JN__Q"ITAN__0O!TZY   WH$J ; 1P_V $("[_
+MZ$SN,(#_W$Y>3G5.^0  )N!(>  E3D!E\DYU3E;_V$C7,  H;@ (2^[_X$J,
+M9R1*%&<@*HQ(5$ZY  !0D%A/*T  !%!-*KP  J)L<@(K00 $4$T@.0 " $2P
+MN0 "H_!D$B Y  ( 1$'Y  *BA"AP# !@!BA\  *B;RJ,+Q5.N0  4)!83RM 
+M  1032J\  *B?7(!*T$ !$'N_^ @#9"(YH!2@"\ 2&[_X$AX  ).N0  CJ9,
+M[C  _]A.7DYU        3OD  ";@2'@ >4Y 9?).=0                  
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                     $ H(RE-8W)T,2YS(#$N-B X."\P,B\P."!#;W!Y
+M<B Q.3@U(%-U;B!-:6-R;P     " $                              
+M                      "                                     
+M                                          !D    !           
+M                                          !I;G-E<G0Z(&)A9"!B
+M;&]C:R!S:7IE("@E9"D@870@)2-X"@!B;&]C:W-I>F4],"!A=" E(W@* &)L
+M;V-K<VEZ93TP(&%T("4C> H 9G)E93H@:6QL96=A;"!A9&1R97-S("@E(W@I
+M"@!F<F5E.B!B860@8FQO8VL@<VEZ92 H)60I(&%T("4C> H 9G)E93H@8FQO
+M8VMS("4C>"P@)2-X(&]V97)L87 * &9R964Z(&)L;V-K("4C>"!W87,@86QR
+M96%D>2!F<F5E"@!F<F5E.B!B;&]C:R E(W@@=V%S(&%L<F5A9'D@9G)E90H 
+M<F5A;&QO8SH@:6QL96=A;"!A9&1R97-S("@E(W@I"@!R96%L;&]C.B!B860@
+M8FQO8VL@<VEZ92 H)60I(&%T("4C> H <F5A;&QO8SH@8F%D(&)L;V-K<VEZ
+M92@E9"D@870@)2-X"@!R96%L;&]C.B!B860@8FQO8VL@<VEZ92 H)60I(&%T
+M("4C> H <F5A;&QO8SH@8FQO8VL@)2-X('-T<F%D9&QE<R!F<F5E(&)L;V-K
+M(&)O=6YD87)Y"@!G971F<F5E:&1R.B!O=70@;V8@;65M;W)Y     JVL    
+M                         0                         " 0      
+M                  8"                                        
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                 K-,       "!:0  @6K  (%O  "!6,  @5O  (%@@ "
+M!8X      "T *P @ #!X #!8 "T *P @ "T *P @ "T *P @ # Q,C,T-38W
+M.#DP ",@*RTN,#$R,S0U-C<X.6A,)  P,3(S-#4V-S@Y,  C("LM+C Q,C,T
+M-38W.#EH)       *&YU;&PI # Q,C,T-38W.#EA8F-D968 ,#$R,S0U-C<X
+M.4%"0T1%1@                      (" @(" @(" @*"@H*"@@(" @(" @
+M(" @(" @(" @(""($! 0$! 0$! 0$! 0$! 01$1$1$1$1$1$1! 0$! 0$!!!
+M04%!04$! 0$! 0$! 0$! 0$! 0$! 0$! 1 0$! 0$$)"0D)"0@(" @(" @("
+M @(" @(" @(" @("$! 0$"                                      
+M                                                            
+M                                                            
+M                                                            
+M   ! @,$!08'" D*"PP-#@\0$1(3%!46%Q@9&AL<'1X?("$B(R0E)B<H*2HK
+M+"TN+S Q,C,T-38W.#DZ.SP]/C] 86)C9&5F9VAI:FML;6YO<'%R<W1U=G=X
+M>7I;7%U>7V!!0D-$149'2$E*2TQ-3D]045)35%565UA96GM\?7Y_        
+M                                                            
+M                                                            
+M                                                            
+M       !  (*#  ""@X  @H/  (*$  ""A$  @H2  (*$P ""A0  @H5  (*
+M%G]_?W]_?W]_  ((%                "\ +P O $Q#7U1)344 3$%.1TE.
+M1D\ 3$-?0T],3$%410!,0U]-15-304=%4P!,0U]#5%E010!,0U].54U%4DE#
+M  !,0U]-3TY%5$%260  3$%.1P!,0U]D969A=6QT $, +V5T8R]L;V-A;&4O
+M "\ +W5S<B]S:&%R92]L:6(O;&]C86QE+P O "YC:0!*86X*1F5B"DUA<@I!
+M<'(*36%Y"DIU;@I*=6P*075G"E-E< I/8W0*3F]V"D1E8PI*86YU87)Y"D9E
+M8G)U87)Y"DUA<F-H"D%P<FEL"DUA>0I*=6YE"DIU;'D*075G=7-T"E-E<'1E
+M;6)E<@I/8W1O8F5R"DYO=F5M8F5R"D1E8V5M8F5R %-U;@I-;VX*5'5E"E=E
+M9 I4:'4*1G)I"E-A= I3=6YD87D*36]N9&%Y"E1U97-D87D*5V5D;F5S9&%Y
+M"E1H=7)S9&%Y"D9R:61A>0I3871U<F1A>0 E2#HE33HE4PHE;2\E9"\E>0HE
+M82 E8B E92 E5" E6B E60I!30I030HE02P@)4(@)64L("59"@!# &1E9F%U
+M;'0 0P!Y97, ;F\     +@                     ""B0  @HH3F%. $EN
+M9FEN:71Y       ""D0  @I-  (*40    !);F9I;FET>0!);F8 3F%.    
+M       @8FEN87)Y(&5X<&]N96YT("5D(  @8FEN87)Y(&5X<&]N96YT("5D
+M(  @9&5C:6UA;"!E>'!O;F5N=" E9"  (&1E8VEM86P@97AP;VYE;G0@)60@
+M    (&QI8F,@8F%S92!C;VYV97)S:6]N(&9I;&4@)7,@;&EN92 E9#H@)7, 
+M7UA8+F, "B!?=&EM97-?<&]W97(@9F%I;&5D(&1U92!T;R!E>'!O;F5N=" E
+M9" E9" E9"!L969T;W9E<CH@)60@"@     ""RP  @LP3F%. $EN9FEN:71Y
+M $EN9@!);F9I;FET>0!.84X               3L  %A &>P"AK2 >' T 5S
+M.]L2+C^CGYWB8;+<XBIC!+R4)M6;87 EEL+C=;D4"RPA'QUJ8+@3.Z*)TGUS
+M8/'7W\;*WRL&:8<W)+@&[6:3;NL92=MODXV"=5YTFC;%;K<Q-I!"Q<@H>8XD
+MK@[>A,$;D\-GP5?#RZ;WM9#@[BPV3-FR7PT0EM1=L+=XT&,&92PRFI$L>;6R
+M23$ _B$HRQ&O9':DX48 (PEW4QW. $5WCL+>K<\"+?2%BI@W<X5[><Z4BIP6
+MYI'3M,T-X$,.74P^^_E4^MR=*>L9B2FOG?1H?'WU>D^'D0)E_IK=4.<3RO05
+M'9*K:&*D@&AC4$6S25MP*,WQ+QV0DT,>20"BWB80PD!J% P4GO"^;T@!R\"#
+M05[^X&C]_&:B0\"Z)J&Y]>9[+VJ]$ETM/?JAN2<,Q@#=(0#0_6;A>O&?_9ZW
+MOPW0T5#_.K06G=.1.$O6I.3T03_N!9(H-;]4CSYX']Y32L+\QM,I!/!J_2AA
+M-;L66 \>9'95LV0ON9>1WH]Q%":^I*_]!B92R719S%5#)/4S4;\BA&/'9)"K
+M8O0% -R+,2B^<IQ3JS4C CRJ\S]'J!H!3(FNR>6CGMS+X'^1,JU\!=WQK#60
+M'N&*M]#Y6 S,%6;E*> "G3EN0U1-, U\R@%F(;Y, =L9'$$4F\,AT*2%7H [
+MDQ+_3WH/A4BV2."13SAULF_&4P%X<9VUK*0@ HU=Y&(*#J^*(FX ;4;0'6&[
+M0>(^DIS5APH1(U18B6/!*@Q*CQM<"(.ASA839E]&2<10EL4->>Z[44>KY7"B
+M,Y\>Z<]#$82]V$,*B>$2E\ 6J??K%A;,>2=7SY[HUH, #)F!<'U,4"T9^@_-
+M;S8TYBE<@@?"WIU'3%+9@]'-0\?J"MY+EA?=D371>@OH!;79K<BI1G/2L46&
+M@N?&@+:!K^OC!FF=7OBRQ*>4]JQ P"WWL\\:A;CQ UJJK&4Q&^MRV&\(U$W+
+MM>Q^]O4>1<J,&RADHG,V4 :SB(!!:31)0=EU/-]2TGZY/J;LI*U))A3O;NA5
+MJ7C=8;U9.8QB=/6;0U#97)QZ1M$!C<*8:^KK.&+:E-XI[(J0FK<_)?/*&ZYK
+M:,/NHXFWLZJ[#X_[S-'K;AT#:Z8JY!=':B*=LN,JFXY\4<?#[_?$5VF)?U7U
+MXZ%KIYSK">@[^L\N?U<@9JMI&NH0")HU#5@WE_CDY4HBIV[CJ%9N=,+*K%;F
+M#VX.$S8X.1)S8O775'BZY-MS-54* ?!8FE#:]GIRDZ1C19A<ZZC."%>@R^HD
+MNB.2PXCB0C'00;J'%U#N3,EP9/G<N>]I@=#7V\1-BMZW6DI..F:4%$@T2L<Q
+M:"[%'CP^2^!V%CU2["U&/@SBCGGV-^#J(IPB!.84.63@M*6O6+=\:8GJI0^^
+MOM_A  ;9^M8JN\WIWQJYBC&N_LK,_D2MLJ"=:$+D6< >RNFU)<Z[AJ<1A$OF
+MX9Q'@Y'U)C)0'>5*2J2"ZW:\.5_5'KD_TF_HV>\;#D-BFY2=J Q*)D)QC"=K
+M?-(J;0"N)N!UII3R)SII]MQ<G^>X"I8>9WD]UL4<XQ[1X6\=AQDNA-4M1ALF
+M)2O\#^OF:)#(#1+B=N$A:)VA?.Z&#*FNY;BM84&%%TCQ;.L7RT"G;?8@K/&@
+M_20K4L9922+/W]JDZR"Q45/_.L?( 5+P#G!9>G/NCW7U\=@AL).,^?!,1IMS
+M1V;:47\4< .NS$\%,1P!0!=;UVUB;-69&X^5<FC. GN%YTK+$*:0%ANY.AZN
+M*OKEQ^BRD%56 ^;OHYI0.P-MQHN2NI;6JZF]L-D_+;?*&-Q0T#E'C>26EG!T
+MTNK:K1JV!$K>\JO-8CKS[DD3MUBM.:-)0[EL>4$W=*2N5= -+:]SWVNY:F4D
+M[I)T>0 V_ -L!>  !;=R=)QT0<FFD^A2.^) NA=^K E*NW(\PV_7P:\2NF"R
+MGP.XAR'L)DJ!$E\/Z$Z/UL,OD(!D;2?"!!/@#M_#)!2P#9E3NG^$\>TXBCUL
+M*6;Y#2 +X/F+^XOQU)4H*N8?M5,<\.B<W!53K4KAGG*&7G^#OEP)S FCE&[\
+M;.5(LX8R><]I\\H@0#_E#1;X:HE,#GGW8HS9TZ4+%3Y!4>K?W+/&RP9N1,'!
+M4XR=:-DEK1.G4@&._[-QLHT5Y0/9?3$><V$_[XUR;$Q$!$> -@-.8FIO SL/
+MVJ(83Q?)I 0ZGE52J(=]4$JKU.>)A=G8M@"!+P<^M=7]*J*XK^<(,P, []\U
+M7@^F9$R.2E&GB".>L0PQ=C?<7-</C_V@7-V[VN_IK^)ZV2+X-(O$'2.M!D9R
+M8T%OSB]E@FI"^\ ?*(S-_XM'<1H?Y%L*B/T#YM\N>CXR!SDU@$DAROKK=(% 
+M-3*$*P.[U<IX(:?)',_P%]C!U#?ET'6R.&UJ]PGD[,XB/&I_44EQ]"GZ:V5*
+M2E-+"IO)LC6/1X']WO&[<YEUU)#.P_I%/_P[8U4A=Z:BHMIBG)51Y/F0]+<2
+MH><PI*#QMFB-@N.4&ICMC0VWI)0)H%$71$\GS#NF-[ID">,9XDL(G1DKDC<P
+M=>7=@@5 O3;W%KQ D>6<>U'-_DHPQ@>VC%&P$]2\V5?(6@'[)LNM5ZH!B&AT
+MJ#$N5#@4]\H\#CFT;_ZAV0>VTVI"EL:VY-85%D3^W2[0N<G#(GK%\VL7YGY[
+M[@O?.WD'!7?!\J9\W"R13#^TT<=2^1;),AI!;\2K,)WP;E%K.+)&5K4F<9HZ
+M)H>:N9\HEL6@*6_(@"92XR%O]BS>-P=^3A$E1"DZJX/%MY;I\;VX@^M,\/,T
+M2.MTFQV1+"U4OBG!VHEQJL[ ^W*L>$$1WP2IJF&6\$0(&@\<0&LS9R:C&!FF
+M94KTLTE:TQ!V"0O"Y!7W6'::B+A,2C+@RCO4;"5'#_(NN2Y;L9]V0YF6G]@B
+MZF.#X+'-'.+I7NA>6FH\?%[;#+?0LJ\W(- 7 *2A +5&Y[KON<DX48B"0*-X
+MJT"Y=419VF0(N-C,D)S*15>LDCP<[ MQX;T]X? 'BG;Q.8244>Z<AGXO7F6+
+M)Y%5*I ^^Q?!$"-S5 =0(2YM%I/57/[TK055&7F;([.[ZJTD@L=2H?$FA:Y-
+M5][\>#T='0#P31(26HJ$W2%&P*/B!(!_0YO>Y&XX:J'NF8UGZ7ZN,V[>UOHP
+MY.X\#;+&;Y4!U'?V_E#7L3@G\@S&8:+>0WKC1XI^<,J^@BOV(>:#="EQD[^!
+M$+IY3#M=['4DI7T3Q$GO!F!LAW.TN*7#T*-\?)8[G(;OU$I<=3Q;L@X@31LD
+M?VKL7.?1DI(YYVB4]*!9L& B%<E8AMV.QC_H;24=$(D<UBK]6S:M$QK2B],@
+MBW0J+F@7!/?!&620TF)YRCI' ZEUG]D Y5U#AI#9B'HF$6$ALQ&&)*C86#<7
+M9_T80?[&O$= ]S$3J,;^K%&7A8]3R,,B8C2.W"Y_"/ 'BZ;W<)$6Q<\66I0W
+M[!K)AZE)^LC\@>'UM;B-X:Z3%UC2KX >2'=WO$/8=@M%PW\9JYZN1*B:VG<;
+MSJW) 11"<DS#Z4638#5,^1M DLA!79G(R9PGDT"8UNVQ5YE2*R6+_4'7-$6Z
+M2]71DO&=6#@V]DE;H;AQ[%J[N:IB(Q+0)R"!+0OUQP8[U5>&$]_)#\L25'?2
+MI-U94$76?330G?@7)N1" !+&[1]_BJH]Y<J?'7=0*6S(OTQ?O.Z_M:J(>B<@
+M[R<)A4BLX"+I'6::?#I0U-"U_#Y0)@EYHI'A7O.8NQT CH5\%6F\H= Y,7>1
+MU+<5 )#.&HGS,PNB3?G.*")GBS+T[2-[F$[Z*PP7S'F5MR^? C/U@>$WKC5^
+M-V:LDTHZ*LFDW@M@[KA2#K9LK_$UW)1@[L,+:-*65E>VQXMK9Z;G+QGEE8R<
+MS80)L!F>AO=()C280I"P@URD+1VB&F1I\,;[1=&%EJA(Y#6-[U:\DF4 "7,!
+M) 6LD&A$[:Y\9W&B8ON,6E%L'VM%/65',^A_"1^^QE>OICP!)%O\Z1V\8+QS
+MY33SQK"M9[O3Y,VF/.\4^]TNTJ<FR\ZGR,\GT_Y//B) 5T7OI?D>-P#KUO4;
+M'.IBAVV4MOZWA"&A(W:#2=$!B'* R'=]@!2J@SI[16_?<S *\OU$VB7(>\OV
+M\,)&GET9 E7U=WLR_BA9?* ,9#4VLR*TW2C@.[U&&42 \5;?CY68L5R5/$;+
+M<08))I/Y*F9]7Q-[VNIE@",[LR(87+0IL4-)>F8_Q&I2Y\-K,EW_*!<EQ,^K
+M?Z03.V43Y:!-[@&G82T"-R$[E&R0? @*NW_O88<NJLINA)WNI=1 [\&NH,=_
+MS1R/@(R>?-U^D)93=5>:YR_OT&8+RFFPS#X0D0FE,2_?>!6CZ)+?O\C4$0_'
+M^O;XIW_@NQ79D L,EI .(H+EV<8P5C@+0_LV>&(J Q]P:TU^? $?97HBY%AN
+MI(O5GY2$TQZ$Z@F_44\S[^R71GV5%FJ\6_3NA49CHE1+<%+51[,018TCC3OV
+MB@2:$>+@+2FX_+ /)[VYA0BZ]2SG3E?J7R)10;.[W!2;F@OSVRYHV<&=LE;U
+M6K:1Y6/[K*>[.")[A%8I8'3%YC'9!_0^#=1P>[+,KCEW5UU<NL*\3Y2>LZG6
+MIZ6XDE-G2?HSG T^ ;QY1NF"87I<MIGA>)<%8XP+*&S?XHA]TIM?:Q?"&3'F
+MFP_3"B*3^DRQ(G;H$UJK,^C$9UJ)K1B$)HI,ED*;)W6GZS,H_A$MZNL4G\T@
+M?<V^A,CJ\%T'_'DJ,S:!HQ7-@]HV3&ES5P?;[9ZT#2Z-0GDB]!APJT)VI>MX
+M87WD+N<OV#[B]FA9(5./,??^-0P3 H@L^]!#FJF%E" ]]N>)#2?*Y5LBHO:V
+MK452U;-*>D*T=LX(S/=9+EDN-'D4]BTO $OU1PQJWUH*._0-H[9CR2./\(&(
+M,27W6-V5!QVKN)P]232^I:-R7C@^$M:XU]KQ/8"9)2'864C7O"UGI%E2"5?K
+MC0_*9"@)]4_^R:*CUSX]PNNCF,9Y';4ZS:Z4:$,1F-X2T.,"P,JA[RQR#L:I
+M& 5HI ?#12&@G!S)6S_11$*VT^+=NXY/80"(0TK$RP9,3@'MS%\S':P^TK,V
+M=U+-14TR"4*[NP>L>(Q2GU(3Z"'H)#ZN2)9HCDC(8;GP$?$1K@"5YZ*LBZ^D
+M8?:3Z#5.]D_C?I0FBP(I: V(SX)NT42Y#PQS*>G$:Q!J0-LI^FZ\S,0$39VZ
+M#=C6]E+X33K4=Z+Y<-S&M.2;06!SCD3:F8S?]MWMV,_@0,9217J"?.&<OO=W
+M*CB<Y'6UJT@IB94%-[[1=(R<'-%Y6#=8; @@<"39O8M(%8MDZ?FS7&&,.]T(
+M*F8@9 I[C7^4E99:TD6HOEW%FJ!\N45[X(3A35'U.;%"K$8B#'/9*SHA*E25
+M_]G5((BSLJYSQ[FQ?&?&L\X957F3;<6#S6%-D,DX'@SDM%1J^!PSWRCF9619
+M"CS'DO&ZH3=VZ@>5 +PEI_L'2CRK<M3W8!5EM.,<_/<Z)BU"16#6Z6;81Z@U
+MGPV;%WQQ-EHJ421FM62C@H.]"H6\;3YEF;<%:>P_']^/EJJ._]MV\(Z%-L<_
+M =TU*QTYA]UW[R@G(O'D0H_EO<?I&UHVR8<A+XHYV$#.IRK4UEH'GK3A(\$X
+MN/#=!HW]J36;'HU&PB:HCL6\RSHP$CHT8(]_,5NMW"OC.705]8P7&G9VD$<:
+M^"E/FFBK?[!%L@-1DRF2PQ3"\K:%@P0\0]827"(9%H4^;V%@8-?$YZ1&MQ^'
+M 5>VG*^;KJ^T^;'._ /1M<$RWY=I*_E)PTX 4KPBP(",S<X"U^[+C8\S;_C3
+M^I /'IV"]9?HJG,-+7N3F.Q/&.]BON*H%4R.B7$\BW44R<*U$$0L:L&A4^[ 
+MH@OW$:-2EB/XLYP#U=49NS?J"YDS'Q;PU[';,_19K(#"=:5@@^MV"GHC#\&G
+MSE1LH5>'5P<2<.6B3IT1+?D1ZE:F9X865W>P++PPE50H"T3V&0A,B[?'9VU"
+M-)#K_<IJY*>ZZHZJ>W[0%,W3":$E:>'=AZ,Y\!;A<V#3F\)TN?^XG76P\IOB
+M2WGVEGAEB@[O/6M HT.9PC&H6\F:H--<:H7(--]5YZI,9TKC,%R/#=B'VD9_
+MLS5';E\CQ]9H]^049]:ZPJ$3&Y(H]Y^$RFI/C\XG%FB"$.N^[F2!:59L"?F?
+MCL$2=?:@]GRB"-Q;3V;[95]B[U-N$PC0=N/XX.6;!%:\.&Z;0 HJ%M'F%X&Y
+M07\GX_ W(.J$0P"%7J0>0@SUF6*?.FT\@83>X9/#29._1K,NYX8%"^BPT7\<
+M&=NV4Y,"XA$76-4[3URQQX+;Q@A#-\$;^[7GRG/#J2<GVHT ]02'0HW(3JS"
+MR<"+D6.E$3,[K>9("O!_+9EG),]AF)CDWP%:;POVQH[GFP-CSVT;MTR;B].@
+M9"7*NV$Q 9?:<>TL^*$P^%UQ\,]O5 &85X.ETWLES)0<T53#81ESI)()Y(V\
+ME]"MU!%RV.O&0SR4 ))O5I>'5+AH_<NEUAMR?%_04/Y$ ,!&9UM$ ?TU$&B9
+M1OW3=.&#6XJ#D#3);X#P!EP8A]1L=;47,$+SS>^VXZ=EHQA[. 6VX@&L[12J
+M,=O8S)N8:EF\\/'BG/"=3A1F"ZEHZU634>+WIM8O[Z0LQFD*JS+$$>J"P_ZY
+MA\Q!+L.G:2#!:#Q<:2B+UM2>#V1\54#B<DTM2VMGX(4EY.T:>ERIR#QPJA2P
+M,V:ZS0-/0<#M7IWK#P%POT[H!'(.D5F M)J#]*%!FV&*-AF6V/VO ];(H>Q.
+M.;^4.[F8QG#;,>,F+C '4@"/&I\!\<HCVF.O5KO$/"EU%;]KB31- QZ<D]I]
+M<^2DMKZMX>(6/>\/856*1M<I;8PJM@'JKWJQ+^RM53 83^W6VHL]%$<:,6RW
+MF8.S!O@I&@RR6>+0KS+E.14X]O_8Q_$A%F@Y]V+_D7Z=Q^!]/-+WZNM$]="?
+M'_V'+O#X-AJ*CVP#D(WP.]CFVZ"B@.J( UFE/Y4,E,6NST#AU1"61S>:'WQY
+M@?A&'&5Y79!+I<$V)IVPD/]E /WY4$6.!?N-13"6K\*-Z+Y5]9WX2^3)"T)R
+MCD[EYPF4"H>N)+/Q>)GK=]:7A:A8I^2QO3@ZJFSO7%7V2Q&V-$+)DYU!S7P"
+ML\GS/:I4W#/>VAFMDGB-R%<7"2>CY>B4U3?619>[ &[I/A)1P/8*I]+>.@/3
+M/4&Z.9@*C/SA5OQ7@V%NLHAFX'G"R4A@U1C>S!QL*[[A'ED%/I$G2UK%5+&B
+M-+8S88&L<[\L\[H;YR2I*R;^%.(6WTBXU+&%"K[DYB6#I=9WYLM;<A9'')SM
+M9# 7?O YWH-EP.%[(H;R>"TR,;V,NGK*#P"WBX$= T#,0>RMG/LIPZ_=X(>*
+M&*QP+(])/% YDL"4/H^']<*\O-A[ P1"UZHL&)*?N)63G]E0R+Q/I.F69P+:
+M"P96[ZB!HWCCUEQV.P44N)$CKX##OJ\.!3EYRWL?T'E ):H+77VQO8,&.-2C
+M*A318 N-0S/D9BII8^1PUU-J$8LY3/9UY&&<Z.O "(P]SSUHE[^FK[F;BV.@
+M@&;%;OB/]<]]7@%.4JKRXYS(,T1L72:4#%US\6PB=Q27#Q*>O?(RH6B'T!89
+M<D$@1A@KI=0E2BM-Q/+6UUW]HX9]2Z^="%A:,FA)K]KCQ;TAQQ,RW-/,[$7T
+ME+0E/5X2+VG;=<O!!7NJ;I+QN!EZ*"^8*$.B/N(, 'HA "O0%5D4A#5[]3E@
+M5/AR+=[Y^F>E&#;[Q?SZ.JXM*.*/!4*H03%^<G.BW)W5+N,EUN-4R5,3P423
+MNT(T#;J;2&^L"1S+IWG]MI4MM[*>?@(9MV;0#UMY4!,Q3O8]5*J\T!1\KG]X
+M7%:3(U D)__0HFA';GHOE*J.F ;QHCM]Y[.1\5L4*TX)HN,Z>G-NQ+[?]5Y2
+MW*0I/1BN$]U,83#7JB&CL@7F1PAH0-<0&3HB RQ>-R$ENB4[E15,@K5$74U[
+M/63;>I/1Q#S2K=HE92&BDF)<H*)CI0'SEPQEO02)*S8^<E$SDIKL0VWA ]$%
+M=BP+Z7LNI$TGPB=8I)5,2Q6(5?M/7>V@LKI=-2)C'U@D5!_]W55+^9R(*)O*
+M:+$-5(J>J1$MGW_1; Z(:,!5W,%.33]OOWB[3YSGB?N.VZ>[C8# %XTY@T.6
+M')?8$$ 9;0$H0U"X9E&"7W.MN!D:L=\KE=7< G9/4DUSPD2)U#*V)N@X:=_V
+MSG9:OS&;VX8M-WHF^B0H+6E&8ZZ<>V0E[4*K"; I-\PFZ.H65UA3"PVYI!*/
+M[X,$IF^NGS3#Q /(FTWH8 "8*68E0Z1IAHA34HNIX G_9N\PNLI+Y!,=$+PO
+M*"F9<<>'#4%-I+KM8R)]!)W5K'!\_30C-O[Q>VNS?>5[/DE/F5/CZ83&=L$#
+MR#>0*3".3T^&^;C>57SW8C[)QSD5S28'>(:I@F?2<O##2HT$7%)12?I([SO+
+M7'39@U\_J'ZU&,W.#3U4FL2U/U^I&5-%)A$4P(.$Q-_Y6>O%TQ$,!PP)NM U
+MV-@\ >)MJ4O/.5#?=OW^H@<]G]4VI7[]_?;>T8^%IE$HO(&Q"2^J\ '"2"L0
+M-)]J!B:PD=8;)>!'0!"Y RYP'VO^Q4NGWW8/-)0J9/':ER,QMZ_RT673">;X
+M.;LL$[/P,-FJI5M:.+ARKA(3K%76V84\&&' ITE8P4^EQ8P;#U&^LO$0#M@>
+MB-S#!==R<"()C "J<VBX,TP_:0G!#*&O,+P0T=P'9@K'^&UU#/;YJ5;<=G3"
+M^DT(2+#-$1,YPJ'^1#K7=7[7]!Z4<EMO"WSA+*>7#[314PSVNW\4*7T=>!'3
+M-PG]Q@'/\HU/H %]K ]%2DCPN84_-T!A:$( ]6(P5.A!!U\"A?@Q0_ $6L-W
+M"GZ%RR7*5, SK)QDU;JXM@B&5H"O1'P.734M!53B#E%H"./(?4""\W8[GU^/
+M=-8 E.445",X^LU"@[RW@[VDT.<:JNN.;B^](B?Y4T&.;E"!*]#"_'E!O-'P
+M1DZ1-[H<XE '*!F .>FU20>Y0IZ-7SG)17JAN7*4-@H88.HC8^Q!5<-SJM"$
+M7HF-5M5A'9<_"^\+]>*0%^VCA'HAP,2V"R8DC"5UT,$"&[RZORG>%:&PZ8UD
+M?DO[7?$$%UT9^1C&"P;-Q5;NF7[C"HQ55R8&0SI8I]XQ4'HY!/(JH2!2DV'"
+M&95V7X?9(QL!Q(EV@=H)_=2ACLKD* )+4#3;79(]W[;Q!DZVFJ>,Y7:NJJ[,
+M6M(*<0IEW.-372+^  >,@?_W3W(OTM[&:UM1O8@RE&OT"04R/H=I$XBQT@,V
+MHFD$_WC:72]JTD\A0["ND0IX$9WQ0+^W[:_J%+9NK]ZM5Z@I>^=Z&LVB'/+7
+MX?00)8O_6+AJ.*2^MJ)H .]ZZITPD2>)&*F3O!=W[P T3V,GOX>7#*GQ.O']
+MXA,/*SY89Q@__]]MUH]'C%)0I);.@#DD$=M6!B_'F+$HZFP(0Z-H[,MS+&23
+MZ5/$)X)Y)C&"3!'!H-WKUCU*B1?Y9A L((0V4+X)BH ?M*2MQ!Z<?[,P':]*
+M$KTAFLE+N1P/F75CA7RNA1L+G4]0#QV?RQB+T"54/=80#!OW=TOD".OGS2<,
+MO'R^KM1)5H94;9T*JV28(/Q<&:-Y$@GYKW2F87)RD*ZPP2L1O$TDIT(6D]U^
+MFGK0<COKXX?HTT4<</SI&&*FMMEE'P[>*1,FSF2K>0)_)$#J:+8;?0MA^<ML
+M<3>XRO&.3$]?D**U9/.J*;Y5H1^OIM VJR8<QR3R-BUZ]#'?V2IX:/F_)> :
+M"WS_QLW7PJ>A3"@R4-58DS"X33V>I&N]NZ#EWDJL)4PF[^FZ"\':S*%+ZO_G
+M0;0*4\,7B4VHA UO_X\<3HZ_)J@-_B>E6\B*U0H6+ 6F)Z[?P^CR')J)W2&0
+MQ2".L$HW$)U6.PK!/]WH/1#4C?ICM6..<]"K*A0M :I<_01/2\T:152:D>O-
+M4P.%["F,K"AI&+,AJG=>_O'3'L:"Z3T ]@>T.!R15"N1:[6G81R]I54F5T8W
+M,U81S#?QH3^WQRV.A-S-7RG*&IB'K+5W1<.@S&- -;;)$N[U^(P6JW$*YT:_
+M/P:0>:H.!H(+FC!-EB :>:^!,GB'OA06 .^JBJ0W.;B))B57L"#0=)7:I=RH
+M[B#U/J"- =>97F?ID!^=C<"4_!>H?I$$>$&=7YI;BI1*=6'-]=LNX^2/PF#\
+MO8E+U612LUH -R^>IMGKXT'4^&EKU]?<;)K4SW(#(BR&,!1YL=3JD@&5MG"@
+M5F=MLT/J=LK @TNLK'=TZF1)5WY4;\ZQXK^5]X=:L\?@I^:@L/>R>>VHI9->
+M2Q9RNJUR3"=:@#!20S@]JKEU;+Q-<F\]%E=> Q/?B>E"#U#_T_$2A5KI-_R1
+M&T;_LCZ>-V%V1L$CKR4=53TQ)BN#]88!T#$<X%0TVV\]2%HI+6>)NDS0WV23
+MTA8TZ!_VLS.[_]:D<JA%.*A'2F'RZ_U&A "X(;_PE?V\=PHK=MG(Q6%U=^E7
+M8M'$59K_#G7 AJ)A025X )Y@)#5AE\OD65V_GXU*T#:\4MQ8T8XO('-P3 @,
+M':5#80%JHMPAI,IKY?419\^35.F1UQ7XYH*.XXU_D$1$B! 9H$AN+*_K]X9F
+MS1P#@\L1+_"FXA55 ._(36L(55)UA]ED;%A5MFBL%,G^6_!%SWW+(P:A0EAA
+M3PT_VU@E#V9C_KA*#J_X1%F&\S?'HBP&#S[3=11VY=\-'>JV;9^?#2,SE(@$
+M*D@G"2,D<YW<!Z=8++*BT&>/'7KB++1W6\[I=9(%1L'S0!#8XO"T'[$+U9E(
+MF51=B^OT7I,_72UEULWT8B$)X8;P*8(7TKM=>2?R<:N5]NTL*!CC'H'EBV-_
+MG,R-D\]2*W="_PY/NH&^A(?H]\DVU[GMXW_)V8!7FTGVQM78RT>FA>&]'3K3
+M!T!=E4;D:AOA $OL=<^=2?E3AW6^:(IRKLIJ 2G(PXO"&-D/NY5JTS"'SFO-
+M8QDGM#OBM/F7Q5D*3XLA.OV*'\OUA,[\%>LS8IW3+FHJ(1IHS2C%3.\$&F+?
+M*!(?'(K7G\ME*DE\$0I]DN^.>RS''# GMM[_13,8OY_L)!&2JJNR[!*<O2$H
+M9<"IW%/H6"/U]5Z9H'X8B[@<D6]&:AAYX&DVM*'@;UZ>/7;(_9*_W_64L+\1
+M\%IHHJNY+T6<P[8O+HZF:8! [U^>9ZX)9M3G<]+BQ2B.U(RZX&B!1]RDS>F1
+M B>F';(R"0:H=IS_GRPPK<0F"/H>"^WF/GG[&RT.3K;05\M,5LKCQ8GYI[Y^
+MYSA:T./3'Z.#B%%YZK'41XW5-QYYE(KLKJ;H1]-6?YK+<(G&:\T)V1YX/(X[
+M7WO$/?2H\8M67:QI8@;RYH&[6I&A).KM81]_^ZB.]-+9%+4])S7TSXJEO3]0
+M+T=-S)-[SZ7WCAIOMBO&&X+42%+1EY&>%_IQJT+P&HO'9JA+?-4BJ[6;?Q-(
+MG!A8T%8V]A1;<H>$X,UF).X\+)P%.7/55&4D1$D#V+W$?#=X4$&[(6X_EO^K
+MG4.TY,8)G#G+3=NIN7EYN0&$T(^2A^O1(,>'^8X% <K2&*X8@Q0V@K_^$['5
+M..N04AZC/(VEHDW^FYY=Q[<FFU-O@%U8JSA%FZ9DK/<^0=V:\4&S@ T_$D^)
+MP-B^I2X22&KFL+R:B'\]_V\*S^HN3[&6=:SMO&V7)#.H#;0.IHZ7U@4IV'"0
+MJK.+HXZ6B^MOHWAV3ZWT/+AH@)N+H7)O]GY4B@ZPT,^UFO@U.T!GN1+=[_M2
+ME778\8-_)0O),M^U^6CVR1*[F3*@06YCN@A;OG?)'&@+#IK!*+FWM>^+]=6M
+MO74WJ S+;7@%EB/A)D!.:;#]W$"VQ6E0#2:R4_2K=P%VK>/=P2 ?O/R?.#>Q
+MFNB'1J%%.X[SR[K0O-"0,1M 0(#A<J5)-IN[V  \85#S VWWBZB/7<.$8"KF
+M_$\?,-'I,G.)R7$Q_J36TAY<$DVC\A(J,+PP8 T:[7M\X20I<G9*5L>K^'H?
+MAM:O\WZT+^:VK<V0/\$0$N;/U=_ #).\^@QK+F4/*\0[NFE1E@!1%_L\)97Z
+M%+<]4-/-IX)$+3A"JC:_P9Z>6OBP.F!0SYBB90"5?+L!=RD%VI#G-6TD3'>S
+MP)H+FH=S9]H1=C8Z\D*FESDZ?;-[[/@T&1:R%+[S/R]$1Q\NR(<.>5]_7P93
+M^<R38>9A/CYU#"7&O&I (<A]KDXE(@_OAI9: '7BZ[)Y7@6<%W=/"CC\\/2H
+M0/\.8:ZU)PR),*$)ND![20$OX'0T4#W/.$.]:R@H==3Y@L\.E4ETGW)88!(>
+M+4EYX(+8=>7#S",A?FZJ%>^[,2TW!3F374>N3N7I2ASKV/O<:-3.)=-W(A,,
+M+3$ARAP<!\Y7'!E(T@I)_""9#'</-(Q5>P(]@OBK2L">CY@''P-)D!(8R5OC
+M=6K+8YD&F\>B 1/PPKP9N^(:!?FXXK5H0!;?+*SO!Z]=IY7MA*6+:3DM%US:
+M/H#"XE>FXG(/#OV]#;^<OTXBL(&:/XGBU]^UZB'MVBB*Z$N];#LS G#D/D@>
+M")"=FX=U[J\^7"Z)G?5D"[1/[;> (RELY[R,M)/ J<$N^6KQ)]8*IYM<$V;>
+MT9;_4&.1&431KJ:SSMKH"A"+]WAA:[W][T)HML'=)BBEC=,=)M$OB),@$@?9
+M:@1C_T?K)+$(V_YWOD[K@;&BX:XN753^_5-/9,WPL.2D(IIP,S3OK\19R;PD
+M0_F^>O?G*:>?=*R;'@N0O 8I       ! #8 GP$] @X#% 1.!;T'7PDV"T$-
+M@0_T$IP      !8 +0!# %H < "' )T M #* .$ ]P$. 20   0:  $1X!32
+M"F,*2@J, /$"X!?F"V811!"G T(>QQY&$9L,$24-)>T<V Y[#)X-&!XI$ZD)
+M9B.3#)P;'2)S!2T3W"2)).D)@QHP).40I0Q:%9@E3!+U%:\;\2&Z&I (#@ S
+M"A\1, M_!$L49P*;'#8/AB2#&98/H N_ BP%JP.((FP=UP=L$K,-5Q&?%^@$
+M#0NU &$!DQO\#_T48 RN% XA(!B3(K$/?"06"7L #B8P",TB\AFV$0X$SA=D
+M%VH3>@D<##TES!'%%?T1V"/;"]PC[1P!#"\F9!8&#M02"1D5%V8E&P(+%%,(
+M:!QZ&M\F51%9%R4#'AQ$#[,8HR#. )T)U!?_(<8=1"5O)M(4(!J_'T8"JP#T
+M'T8$K ZN)3P!Q &1%V@=&@75 O$F8P1F"Q,6:AX]#7,#<0B\!LT0B12?#E<+
+M?!2N'MHF?!U0(3P/<0G?#=H*F L?"^@<_ [7&G,@"A$"'!(?_A':&2@5AR%E
+M%"$5<A[N FP4>Q6G#R$8U"-V%0H&-QO'$#\)$" $&:D7L $B)OH NR,0(A(2
+M+P'B'Z\/Y@!,"T,EDQPQ&W,6K@S9'7D<2B"A"E0A! :0!&,?X1+P(;L#VQ9>
+M(V\,%@F$&4@%%PBP'(D%N LG)K(%M 3.&5$CD@)W#&X#QB8$#Y0>>A4;$5T(
+MK@JH#:$A>P#*$W !&1=\ !$BCQ*\#/@F< %G#[\0JB @$[ C,AG.(*H/'@KS
+M!1,*YA7%(3 = 0T!&U@!\0MN"T86LQQC$?0C1QAX#OP2@PLO#6@14"-M"7\+
+M+Q#7"KX2 0=,)FXA"P%K!Q$*%16 !^@8FA8J(]P2=2$F'?0*E0$A#2 !$PH9
+M")T0"0K2'P028B'-$/L;\@Y<&;$!5!D_"$D*<!BA'U8>H!7B)6,0V V*'U0'
+M? _F"ZP-@1D0)E0(?B+B(]47O"!X UD$2 2< FP2^P"8!$0=0Q*)#S$// HG
+M$3$.;!$,"K 0]0;A&D,5*QRS#'87922T"\T#EA^3'"@5501*&P4?AQ7P'BH;
+MQ"2T"R\%4B.))> 7" "D(LT"*P&R(/T361L)"4 !'09I&CD:6"<%&Q(F>@FK
+M $<3/12S$2PC& ^Z(+4%]P.L%L 4V1LY$(P+G0C;"?X:? "Z"'T4?!H/#ODE
+MEQ$7&+<8PQ\=%]H*>B,K)@L%(@ R#]@1(1\*!987T27R <$: Q;4!JL6>P@\
+M"Z4.\ CY(F<3.!5= S\+:B/I")(@:1?G""@+Y1GQ$W$*T1QR$O 8:P7%!KTF
+MG U( 'L1B2(K),X+=@CV)N(.;""Y!B(/JQPT#5L2RA5)",(  0'['R$4]!Z;
+M(L\@#B)J!>LDN1-,# \5U G8"TD L #5"B\FTP%5&I<3[@B?(8 FMA6E!MP,
+M'!;Y"LX&VAO] J8@1 HQ%($0%P./"R47. >C'E81+AT!%Y(+5@:&%(T:8"'X
+M(L4"TP@-!*$1"03$&)<D?@ZA"M((Q24M(:@"!P%&$R8)S@#P"P$7Y!QC%D 6
+M*1*6 9 >] F!"M ;RR:A'W@3" TS&,L O M4#BP"S@HI CD1C23_'D<:3A"%
+M'+81V@W3)NP<E@MM''43M ..!)(:]B4'%M81ZP@2)?8'Z"5^)CH:LB8\ VXA
+M0P'?#O,>)0FC$OX8QAD=!MLA?R6U'>H7L"$T#IL:,27M(A<<% ]0 H,-TB/L
+M!_P)T ^^$H8BF@KN%2TDZ1&-'O,>@Q] )/H#?0F3": "4P*($F@EU00M&2 6
+M4"26"/,@727) \,#'0ZO(AHF.PPN&!\:Z!RL%JP&^Q&3)#H5X"&O!] +Q!UE
+M#KP6R")(("DB<Q!:(H<$VPZM&<L )B,<!IDE PI@$-0*Q091(2,<^Q%0 :8-
+M,R2C'P42X!C]$P  A!*($YH(R0QR'PLB!Q8=&^ 'G29C$"<=C@!J!OD8R!D^
+M%PPE5P;/(C<F5PK."J8BN02:%YH%.0DH O8(UB9])HX!0 ^-"N<.EP2H'R,8
+M.@?P$7X>(!Y_#]<$[AR6$*L")PEE'3@.2027$"4"9A-W#B8"V081#'(#]P1N
+M&2T,82:1$M4 $PN##/($,@B/#F,E/B;Y!/H8#!/X!UX3T1\\$J$5T!",!^\;
+M[ O2'H@.\Q0R'&$<M"8O&JH7Y2""%0T"TP\G'E8(8 9J%6@0PQB>!241!!1>
+M&B@%G@, (B 9A L@)#0%>P1/)5,(XA-\!/87VQ6+(K,)RP$3'_L2/@// *4:
+MU >U X8G"P6- $X9AAX( *L$?P $%0 +( P9'38E;1*? C0<^ M.)48"U@GG
+M&:@9(A:/((X:!!^M P 1'1\, T E_QI0$1,>!B%& 4P K2 Q(3( !!FB#:4,
+M*!.& I0%]!JG&&(92Q_R'OD@:B3?(\D($1.=#3P:YQEO&AL0-P2X'T40(@YL
+M&R0(C0,E!(( A1!)&>\'$P/>%80AM0$L"08-OA.9%.X6VB'?&:T ,160%9@?
+M@ UQ%R\4[!=+%@ 7(B1'":X&.R)[!+PF:Q+P"@TBEABM(&P;Z QY&% (^1B3
+M""XD.@[U)"(.&"0(&(X-YQNI% 8>+ LA'-XE' D#"UP"@17^!/<(=1VD$OTD
+MX1N6" X/#@$#%0\%Q0QH%L@-%P[##:<7Q28/!"P0-0Z:)@D*R1C[!B<7^"5B
+M :,BT!*' (L3\B35&-(9[P?@ " 99PJ  /T, "#V!Q$.%1T%&0<-PPQZ#.4-
+M5Q^3'1( #1CH#@,F? R> Y,8R!^B(^@0'P5/#H$6>AK@"FL/C0:1 )L*Z1E!
+M&+X>MPG>#^L* !.G!)( 31D_!U45,Q\J"HL!+1,>"0P:/":# .L8K"9J%TT1
+M@2-[&),A;B22'XLFS!D%&O8.]1>H">$"LQIR!N$,<R*J'',7P!S\%CT1E06_
+M)FD8WA)'$H$,]A:[%&T4GQH#)H(!J!$Z ","A1__)"\6) G1%' 3XQ_Y!\(B
+M#!96':$,+ JL"$8<3P[!&/<4+14M(!\/P0[U%CDEI1,#$ID6X!$*)(@7#!]%
+M"@ ,P!_#%LH)YR"W#X<"41GT%L<&*1%,(/($M2*P#H /_1:> $H6>Q3L :4&
+M!0*, IP6,P=7#O$ >B*W&64EU ,]!3<&^ Y'&G<+Q1V@(PLB[Q'2#4X2R N:
+M#_4;[!7Y%UL+D05V"_L*50G.!"X*Y@-2(?H-L@3%'$@"JPJ\#OP6E@\Q$.@A
+M#A7:&B0*E!M'% \:G SY%KX'>P@] ?05=1;[&[\/:P-)(E\=[0)I"VD(QP!]
+M&F8@WP=E" (CR![['J8BY0,[#88? B**%B<@8PC" 8L?F@;B'Y$@I1K=!N\/
+ME@II$)0-TB:5%5T061P+!Z0B=!%:! H#MA/(%*H +1'3!L\=& ^Y(X,F\Q;U
+M'HL/8 ]D%]D .@) (QP"F ]/)+4AN1[<%@$#"@'A!V $M!/M'K8=I2/G)>X*
+M@1&%!PP8QQ#K# (@I1:U#+XF PY!"" +,!8J $TC>AB) ]4+WQ&\%!H&=A ?
+M#'\%=A1_!O<CRQ1! L(*OB#N)J@)\PK_"<T-3 IM#H$*H@<' (H#GB.>(4T1
+M9B'<&, F*B'M)4P#Y1;6'8<E"R"J!H$*S2.%(#T&O292 -4>S0LE!8,(Y!CP
+M((D3:12E",L9\R9I"Z8D%P.?&?4%L!\N(? 7LQZR"!P7V!1A H0-O1<S&]8=
+MDQ+Z$?H+/B22&B8$V  R(.<7X14*(VT9W@A;!B@%$P[##^<:?Q! $V\#]PR0
+M%:42U@K '64"% /W#6P7X!LT!"$4V@6I%<< ?QU.&=4=A!3A!' 2-@;-"9T3
+M]"*P#^0=QB:V!UP:\@VZ%8 /"1,8!O0FA048#38'U1R3!DX>CA2;)4$$7@[V
+M!V$-#B$2&0  _@HZ);492A-@ 8T*$!T\)#L@* #'(78 H1C8&:T5J0>F"_L4
+MCP(O$UX!.P82(ID<$B&N#L8>/ S.!P(<9 I(%7TEDB(B#CL8A1=\#AH!(!!N
+M%J0-DQP&$S B-ABS#T$CP!\1$0D1;PP7#>(&DQ>.!XD<SQAR"&@9HA;6#-\/
+M0@)M#W\5B!LR%$ ?90G[&%$;GQU !+P3(@FI'* .A!;!)<@EIQO0 ;L=O"$1
+M%^(?PQ;!#( >1"0Z$-<DCA(\'(0B( ]M D@DUQ<B&FD6RP5Z)J8;L F:"$ 4
+M7P;R&;PG!R;D([P:3122#=@9)26?!E(50@][",$9?1/I&H@B/17_#\8&R RX
+M()\4PB;[&N07?P1B%'<A-1:0&?D3^AK@ <P!VP4Q"MD?8!FB'J8;:B:E)*\.
+MT29J$&</ P)S)=D(90"@!2\ERB%P)%,C!1RU'_L7@1N<'YT6?1VV"7< AP%T
+M&)X1_0?K(],%+!6'(XLBDB,B("@1=A\L'T4<,!&"%^P!*009&T0EE0$W(O<B
+MLQ=:#^TE;0G,$F<13 T-#<L""R.V'.D?0P.V#-\!HQX%"ND2% 6Z)( &GB80
+M E //1W(%+0"7PL.'*,,_!ST)'\#ZB1V 9 !Y2;B!.D -!M_#((*0A./#-L0
+MC23D&LP4VQU4!)<D#!,Q([D%/ $R"%$FQ!^P ]\;SA8K&OH8S FL!/4?=0**
+M#?H>30=5'8X"7 0,'_$?Z0;Q':(/UP;1"HP?10 ! 70#2PR=%ML62 ZH"6D@
+MI!+F Z(/ZQ_5"CP9IPSF&TP@3@+U#,L/.QZ8 >@<AB3O"<PB#AU=(<X;#0WG
+M(:D751^9(W$7"1=^"]\/Q@P[(Q,BU!X[": 12!YA T(6D"37 ?L/E")?%E<C
+M/ P;'6,/R0K5'NDA8A?*&6D8M *F%2@5OB0S%P,* @!J!Z(3F@N3)AD$/@(^
+M)" A"1Z9%!\E00VR)F4<: .8(8P3J"8+)7@BU2"-(-T>M X%(7X+X!Z%$2( 
+M' 8Y$2H%3A-Y(J<CB!TF T0-@B0Q)"X,SP.0 2(%V1%,%Q\0,@^C%O(AQP"G
+M(*P)LQL4$XT9=PH@ A@*JP#!'.8+@1YZ Q$/_A!8!+TBE :6$;T9!0T=&1<%
+MXA?)!+T$;1/^#5<$-0>F&A,<_Q@)&WH6QP4Z!"H'CP)' & B30P$$L <A@4>
+M&LH7MB/>#T@-:!0= J4=30/I#FL%U L &WD/\Q0K"\X'Z!= #Y$A? HC%V$4
+MU0#4$:P*;Q4H')\BAPK"&JH@CQH4%A4DT@2A!W0&C1MF)14:G@??$$H=8".)
+M"A4<#1_?( P%K!K0)/L4XR9F$3,6X P/%YL<D! 3 ]X#>2"D'O,>' PC(&<B
+MJ1-P%I$.]Q!< T,@)PYJ#<0DKAMO!U0<1!%+ @(8SA.8 @< EP1?!X ;_0")
+M%F@D/0G>'T 2'AW[#'T?2AQ$(T,+[ &M$)L";1)/ D0EQB'4'JP8DR#Y$VD)
+M9P','*L::1ED)O\#)0.3(?@170 X)%<:_ ]-(&07V"8S#>\"M 3K 20#00QV
+M)+X.G $3!$L%RAK%!#@A;Q_+!703)@LZ)8T6L@#L(/L5*"#)(B\.( !F&+ /
+MI0,I"2T<7@0D Y\81 <U"049R0#J&V\$#1^,$+8B4P17"N$4XR/6$P(A7P>[
+M)>4B]PN+!D<!/0'\$?\ENA) &K@': 3K)F@<Y@"P 3T,<171"R %EP(A(4(D
+M+"->$E,2<@E<#_ %GAOY "8)10@A 6<6 B#<',8&4002)G(![ &J%5 DV!;'
+M&)4-?P-_) (!,P]O !(<M@="!PT!8!^5#>XFP0[_(PX=30XR(1,@LA!Q#*H"
+M:0 F%SL-,!GN!@<0SQAR!]@C!17G$JD671,L$-@5;!B$$TL+F0?%'^ )$PX=
+M%O 8,P0;"4 4"A/Z$#TBG0VQ(1L4@P4@)=XF2QD@ 5X;M"$[&1T3(!"@ [D6
+M[1+4%W84C"%+ XD(:!XO"SD0IB;7":09R@$K![<.H21T$;<0?1"Q&^@!*0^I
+M(5<!PPZ]"X07(A=$#^\5EP*O)"LD#AK4$W8?X087%RHBFPZA)((-MPYN!BP8
+M&0%#%;8.ER*((+D:Z 7X#6,EL!OV'90B=0P-!@84!Q%.&JH<ZB1+ C($WB&P
+M"NH8<!WG!#LB>A$^!;0(YAZU()4.70NH$E,!PPWH!BP=GQEM#\T?) %!$: &
+M?B/B 7,>[P38(Q8#Y0<L)104\!5(%XD03A.##9(?(@A;!Y\<^R+N&BD15@WG
+M"!PBM0C0&>,"'P"D%MT2^![B"%$&O [*(54,/PW3"/P;(1Q,$/8/XP-Z'A$E
+M;!X  #T7=R*F'A0C)!H[#2H'R -Y#Q09OA7C!^0EJ0;A"U\"0!*&$-T'UQ;T
+M"MHBMPLL"#@'SB(]#!8"' Q[)*T5M W2$SX,=ATP F$5DB;N)D<6' =A  $#
+MT!-S"^ C]@.[$2<+ 0.J!%@5DQ4+!1H70@>U(TPA+!=)(V$0[1#- D<0BPVU
+M(UL#F J%%1X#P1<Y"SP752#@!4$!"2-7!-D-(26Y%BL<$AB,$C@EZQ0Z(@H+
+M[R30'^ -U CM"[@ 4Q.#$!(( 0RW('X8(@5R!EH?P!5* ^@<G0.Z#"<CAQ@?
+M!F8<*A.$%2X(HB8H ($#N!M[#!<)\0!$"$D7!Q;0'V8862$&$M, *26[ O04
+M+A%C&!L#/!L] 7T5'2%,%IP?:!7X)MT/[Q]5)K45.B2>)4T1IPSS)G,+[0.H
+M"+,&&R,;$38,A@Y8%B,3/PY&#$<@LP\ #J<7Q1>Q',L+2Q4/ 50+ 1!5(#,*
+M"!"T$ZT5RP_W)ID,5!W" N(1T0=]%6,!9"!H AT#JP^I$U$=YB,V%$8'IB(Z
+M(5@)TQ>9!98@_Q[8$W 75@<X" T#4 A0(X@@D!:(!/0*N F-!\T"(Q22"!(*
+MX1DY&WL4^!W"!6T%&! 7 X,1QP\E#$0/)PWL#P0+^@CG'E,0/PZ"'K<7^P($
+M#^L.Y0&;&K4=D@-?&/T) B7M%T4'6PF<!(P>XR$.&(8)5P2U)9(AG!OD%FX6
+M_":?#=,F'!IU!O<,HAO8".T<GQ3T(S\0= /M!R,2WAM0&A<*R2$1(ML:*0A;
+M'VD'NB*9"^H/%A* 'B\DC!ML'X #2!Q7"6\#G1:*(:\BBP:Z&_ 3Q02I%O81
+M@R'.%GTC00/F'X,8>0- #\\,E1E"".\ERA60!0T=( V"%H<"\PZH&1 <\QD*
+M!IT-7R/V'K@7 "&F$4D2$Q8?%I@9_P*##&0'B2&3 :09NAM)"]P98!C*%'($
+MBR;9 2P#(!X$'WP:81IZ$?@9=@MQ%5P/[1;  :\>9@-)"Y@$"!XD)*XG P@5
+M"%<21@!Q'(0-.")>$ T',1H-&B$6-P,;$N0BFR.J!'$"+0W?$&T/O@ID%P@'
+MUAG#!,@8F0H[%+H1J@(F"M@6S"8R!#0-&QC"(=X=S@Z!'30$Y!>F)405M@KS
+M(,P/;!7. &D+TB53 (H&=AYL)ELF70XB D89U@4M'CT"$@F\#3L#M@U@$M<=
+M$B:))?('!!/K"Y02!0Y$$L<: QU&$'\B3A_;!F0(D <2"E(.32.((%P>="4*
+M)L ;)QC3(QP!7@V8!\ # !9S$5,+4B!@ \<'2A%C(BL=R@YD&4P2D!G, BX)
+M42,I"9X4'A2+&=@)5A!8)387-0Q"#Q4-F@ 3&,4;?!CA .,5RB8Q$&@"&AH^
+M"L %.A"-"  6F1<+$B@*PPL#)10DZB5B!BT#N@SO#FLE)A)7)CX3*PG&&<4@
+MK1$L#&( 7 QA)+\#9B/0&\0 6A/O$+04X!,X&X4&CP7P&XLBO1L]&J()T (^
+M&",5\@#A!FP+AP4B)JT%VPH6#N8)M2("#6DEQ0\S =48UR"^%4\5IAIB$1P!
+M#P^N V,?GQI! Y(): A5'',D>!93)>T(N0V0#R$FHQ<6%5\8R@#>'_$E2P8'
+M'+,$9A-R">@;4A;U(Q4DQ08&)P@=2!R+&>L#/QB\#KD!B@=5 "41P0NF%/X>
+MU"-=&:((E1CL(3X(TP>@"XP@N@7.&<</% 0> 7T"C0]J(> B82;H%ED+U!II
+M%O &(@AU"0\9,QYL 0D5(!3Y $,B+ B:&043^@IG$5$8<@\K)8\/Z!VD#]L)
+M;Q".("L* 25N$+(0+188!U\BVB$$!P !\AH'"HD7$QA^)1X<1P/<%!P5V2-)
+M&J,*@!PL(= 0TPB''X<3#@-_%/ 9FP#A&HP;8P45!0$<K@0@&PP81B1\ ! 8
+M(!D>&[00"2(0%EL772:V%+$0#@Y#$WP6O1(($G<69A]J)1@%=1"J'0D!AP+B
+M#VD1]A"O'9H"$0'8&ATF/QJ2#)H<V1WN&I8'?R4U&DD?&A< )<4*3!VW'5PB
+M3!@Z#WT < 2Y%7,*4PF>%TL)TP3.$!D/U@M\ D84>" 2!#@D 00) EH=$0@1
+M&U8-,P'I I(=31@7#*H*L254!A( \@D3#1D#"Q2:#!$8Q0 8!3 @^03!"U4F
+MLR.)#L</ 0R,!0,4U![V$:\0!P8]'#44^2/$$,TBQ@]O)MX9?PA4&C\*!A4S
+M"=X3& =-!OD,+Q8,)KX&]Q._"YL80@GH&S,,]@>2!UP7)",1"7P@=PR9!+H+
+M'A,4'/$4J!<!#!\.P WV'I@&"@*H)=(FK02)$(P#?2,T)CP-!P)L&;4#K2'V
+M <X-PQG^!<DF=1T/'306O0[K(TX$>!E')O,5GR-8#WTDD078"\$;.0J%%GL)
+M&AJ:"3 %Z G;)?<=*!Y;(.\+V0+O'N <ZA(T"LD4[0HY%S$*Y!0A$F\BS@_N
+M"-4BO"&^ @L;( K,$+$@)@[4(. 9(1VP&$\-E20&((HA9P ](]<=$@_L(G<F
+MIA !'_LFD25E#3\1:0@L"3(FDA@B&%8ABP)'$!<(E"#&)1\@C"/[!CP,ZAT)
+M)+4 YQ[,)5, 4Q*+$-$5( [C$O(&[ EF!U4-^A@='ID #B"("B075Q1 %;H!
+M@Q:(#)8'50FM'X 6TAA $J,;+!6F'5DDI1ZD#<L*NQ9E LD(!0I?'3 3B!,G
+M(G,0<R;*#[X%/0L3!E8 #"&&%#H@P!A8$A D/02:'$ 2\0-W! T2^B%_&G07
+M7!Q_'1DF'B:* L4/F@,?!7@)71X;'MX$N R$'V<AI!W=!RLB_!89""@ O0D,
+M&'\ VA@)%3P  0#""J8E/Q%9#A,-1R3$$OXACR;X!<X(&0W7"0P#21.8#^D7
+M?AHA#T@<I2-K)M8B7!Y!).P?T0B?%O .DR2))MPCXQF((.DB?1H@%]0/MB2>
+M$QT6>  -%CL(N1#N%?X89@&R!,4=)0EZ%@H29@K\! D1! P1!C,'R1G/$T,=
+MTP1*$X4 %PD=%G<<+PG'%D<!)02J!VL!JQ7_!#D.7 (L)B44B!W '0<BYQ5U
+M HP7?26[#FL9_ ;@$,H)W +V&D,EP0R%)&TFHAX9(HD,(A 4#10+DQQ" #\.
+M5Q!F!IL4:R<!&04B+ ,^&,P4Z0O0$Z@=@!WE!N@*D!B_$?< \R",#A(CH".$
+M$$,&4B5W(U@4!!?$(YT7XA'M <X"Z1QV&8 ;XQC+!R$#I 0K 24!NQH7 $$.
+MQ!#_ N\E@R('%8 BS!Y$(5T0FA[1)&4<4@A #&40JQ=B$L0$*A*X'#\%T *5
+M)4(042-R I )(A2P!T\0^R#"('D+1!3Z%&0=G@KM(8(?<18J#XDEW0D^ B$#
+M91JH(@(.]@AT$^$)J I$ ^P*C09F&\D?I1*, Z$B1R0X!A@B518@($(EC15N
+M$@4FAR,M$_@'!Q#Y(<4".B;O&60#0"&0 T8C1QZP%Q,!?0K+']D@S@/C%JD8
+MR@2^$X\4Q!L0 : 2V1<X!1$=?07; T<'B!;V%G$,R H,%( %M ]!$, :H@E4
+M'K,D* 2A"(4-(Q]R(+PFHP&W%< ?0Q;<!,TE@AZG%U$C8165 \H$I %T$T )
+M*"6^(^8$?R+O%&H$S G&(:$FPB )(A0=XP_.)=LFL 7_(#H/KQ=+)CH9M2!(
+M$(8>Z@B*)!,8EQ#^"NH,QPW@'5L83PA<$-H(R@>W G,1;A8Z#54.(Q$Y(6(*
+M^ADS'VH;11;7&@XAK!>I"ZD"" \.%&LCUQW0":\*YB5Z(@DF2!@\ R0@- (!
+M HHA& P?(H$+X02*!/,>S!^R%@ <20]1)=\)*0+T)?PE!0L$&UP+JP7K&.,<
+MEAU''^X%U 7>"#LF<26F'=HFCR&M&T\)+A+^))P&S287#P029";5 ZX#80K=
+M%4< #P(0#C 6]@%?   %<1]<$E ?4AV %J8,00=; /$%8!'J#"8?K0,M"6T<
+MSA%K'<\B\A%F"9,"L!;K(#(-(2* $545CPOU 6P/K""5$(<@J!9<%Z<'HQT^
+M(1@)&"61!7,@$PH"#RD#)!8T!BP5]@#]"$0<P1B'(HXE$@P$&CH#6Q,Y =8&
+M( ]*#<X6Y0!$"-0F;@;1&D4ERPQ] 7$D4QL/&N('SQ#?!\H9S!_-"8@)*1T3
+M <$ R@_  >H4VB) '&$3E"'@%PP5I1,;%] 1'QBS%NX%]!W6#4@8WAA% :P'
+M4!/S&"H)=17(!UDB9"5D'C8/*25["D0>4!/"'O05L10D$ (CX@$-'_T-_2 I
+M&% +2QX #78?RAV0)G,@# ?"%^X-C"/N(,0%)"##)&$.D!KI)E41% >O(7$7
+MTQ^J$ 04H0\5))\CB27H'#@'J0H)#F,91 AY"2D65B'T%0D;D Q+![HDY1*:
+M%0X9C1H'(4HB1R U _X !!T;!E<12A4W"HP-E@#8(@DCNB/ )4<)+ #)%+<7
+M!A6O#>P'$P"4$YH6EPU7"EX1(Q<J'$D#-@$P%* 3"B&K#Q\9K0<2'[D7W03D
+M(K0D\0U>&\,2D!8\#DL(/P&6&P49_B:N%#<$6QNA%4@DW )]"]<2 @BE(8@9
+MT" =&U<6G24; '<1&R(/";\DV11]&$L9N06^'K@ $1_%!E<0ZR.@';$*Y!*1
+M!%D,Z"7?".TD22:F&Q(.# WA((<.=B%( [@9)0<")(0)11]J)9<23P-4'AX+
+M#@+(&R438AV, TT!12&6%QL>I@"&#_P@@ HB#2$-G@AD#R($CQXI"[42GA\4
+M"ZX.>AA6&_8(WAS7&_0 W '-$24::0T_'?4-S1!3$60'OP!@$OT3:0>C!L(6
+MK J" > 5D2!S)+\4DQ1H%=4!8A_K!XLD-A3:&44,/@CV'547S!ZP$M$EWB;2
+M!L8 MPP.(H<%8@:@&ET411HM!9$9'0NM&),1S0F)(+\,IA)H)+T+=@DO%6@<
+M#PGP'R\<OA!'!JX.EPZ&(B$>1@NI!! >5@K#&FX8NR.'%Y\5S!5]&*$&DB4"
+M <T/EA%*(AX* @]F)A0;&P"6&-<> @TS!3 ?P!=4&NP2_ @[#0(.> 2U ',6
+M$"! #.P!=B,S(C83MA0B$^060AJ:&_0E/0PI#N$/H!-D'.,:H 4")88D_R9F
+M)M$-[R'_"4@:[11B''T,CPU&(64)O@8S#MP+*B,[%U >FQ:]'3L;T0(@(T @
+MSQU6$=L(+@W2!BD;VA:^!\P%RP:D%9<".@,7"A(,"!,G$J,<F 8)).X=<Q#K
+M#Q@F2AK8(5 /G!O5%F0E8P,6'2XEP0#;'(L(EPD'(=T4D!_"%7D8LAO! CL+
+M:"!1'!(F/0] $](*N@8$(UX!BPV0#/$(X!7@![04_A3#'3\/+R+7!6,3 R:W
+M )\&[PG&%)X?_0;7 HD2VQ8$%R(?E1\J#R0#N0!;%)$"2B"Q!3,, 15!"F "
+M] ZF$\D-:!7A"VT0Y PE!C 0E"9W&H05J!I\ VL+G@5_$Z()M0Y\"(,6UA>9
+M&&,E$Q%9(8H$^Q@M(>( *!)@%@HF0P!8#6$7>B%=%!<?(217&I,*712=!,0*
+M)@7G FD77"#V :P)AR..$LT"%@2>(^(@:R5*&A,$%QJ4!I *>@R]'T@:<AVB
+M"Z$1/B3T ;(=7P)G(VP4.A[K"FH/:!,\'J\(KR%\%+(&$"#%$*\<[AC;'=X@
+MSA_@"!4"&Q.I';0%G!2; >(0_R.U'S\96@= #LP3;!03$0<:EP3B(*4-'PY!
+M&F(;C2)5#>H.T1 R #P7;A\K(7\"4!'H$ H-3!W!&N$*B0Q0(2@8N0OC&SHD
+M$ ==##H2^Q@L#RT$% ,V(3(9" >!&E$B)P&O&04<K!O!!-8:)R.,$7,4"!$G
+M$; 5'@0H(.0"\@P_ 6<">A0:'0\'#P1R%S4 - 82(!8A/0OA#[L0?@1.";4,
+MN@\@'8(:O QO#DP7?PAF!)L/]@N^%A $+AZ?)+(!H1%\%QH,41_7(C(1UARZ
+M"-H*(R7+)GD* 0\##L<1001#&LP<1P,((G89QP<$$V09X@:N$N &R1-Y)?P!
+M]")X$P81S0T="D<':B'3%Z<7KP50#R@7\1A+",@-8P[K)FH"$2'V$\\2:272
+M&] %> 5I"]DDR!\7 .@;\@4($\023AF6):(3@0RL#(4*;!*@'C03ZP6M(Q0!
+M&0"0%=T/XA9R"*P+%B9: XX.?!6](0\@40JV#VH!,!D&! 0C\PA<#FL)9@=:
+M :H+:@>A#6L9L #U&-06\PEV)<(8O0.W )8(81TU%TX%@@K+ 3,D[!:J%F$%
+M.PRZ" \F\A@@!MH2E0SA \8A7R*^ '4810CB$-DB(PU< K,761&9">@+M0\I
+M#? %YA9@&GTCIAY7!CDC.1ZX![@.HAZV%)D4B0SE(6<*WPE;'=T!.QDO'04)
+MB .O#>\'AQ(I(L\C-AP$!\H8#1 O(C4)]PY )=D6-QCS)(X/)@XP#Y <10GS
+M)>0#X0CF%J<(- ;4'-DEQ1YO']88KPBQ)HXEV@-T"G4.W M7"'\53!R^(P$=
+M%0(#)2,+<QOC(VH!% Y)$V,'<P?\ EL4!!P'&W<>(!%A)HD4CA;9(U$.>1A*
+M#_P$YP?7)<X.*!0\#=(B0Q_.$]\B-1JA# H.N1Q,$Q,2"Q!'!J,CFR/>!40+
+M6AM/%08-A2&T&W0D;0X#'!01'R;N'G8 :0N+'7(+A@^4([8:B13<#>,$711B
+M&,T;7@[))0@F;Q*['2@ETAM>#]H0#@_E!*80P E^(08,! 5S&<(CRQTW'X$2
+MDQ,* H<8. S&$ID%S2*<$OT)6P6H((<#"":K(%4D! TV"MX,,Q1*#H(3A08"
+M"C,CQB1?(ID)LQ!V"_83$!ZF(D0?G YO'74CB0*;'GX67PC5$^(57R.##4X!
+MI@^:&O84; 3 !ZT!=PK% ^00.P5;$]0=] .L"/<B'"-C(F@8U@JQ'_,4X!%"
+M&W,.+QO9!OT 8!P8!-X#>R(D"2 32 BE!88><0OA("<9@!NF 2L<?0:3(! ?
+MH0:&&?,<QA0:)9TF] NA)=0%I0D>'4($4!G5&GH(U@(%$;(1.Q]T"TL6E@W^
+M'G4*6AO()&P7O00, -D#U!9Y(WH$^QIN"ZT83PHS"/$G"P  &U\.T@VS)+D<
+M A^!'5$5-1^L #D2T!BD QL4-"9' @(@L1G-"$TA(A+W%C\;S JF&<0520/Z
+M'!,AUQCO%3H58 !O!&T=.P(\"E(<S@Y8&;(&01.N!X\?K!^P -L4$2:;!+@1
+M)P-H$X4ENA@,$#@ ]QMN!K@-:PY5 WP-  ]")A8ESPPZ!$@*)A^-%@PD(Q*V
+M&Z<2V #X&U  #1"O 8$*@@L['S,9[20@&;,FH! S%0 1XA_J)"T<8B8+%98,
+MJP3W&(@ A@CV!)$7OP)U">T".P0R#^,82Q?]#]L>;QA]$1(!^ @Z$&P # &,
+M(&@:PQ2S![P(G1?3'68AJ03['(@0T@P''!4<RQ;6!UP$32 E $D16 (3%A$3
+M/R-G&8$8T 2O$O<$O"25!Y,2%B""!.0D&@CX&(4-M!LY(<\4VB),'%\"6R3X
+M'( 5NR;N#V$;80(1(6T*P!=D(U '4 (=(&<0, ER#A,!#2*:))()2 =: .$=
+M& E-!XL!J@@+#0D?+1A-(=D5XP@E HL:Q0<&%Q8B7P\P!WT3TQR#""<1417M
+M ;4BO0TN%: ?] EM#MT2KA3K'=(#00,\$-X7M0>7&RD- R7W!!\?-2*R'KP,
+M7P>5%E,DBB'&&9DAPPH5#*D:"0]@%BT#"",!"B0%?"$ #8H@MAD')40.&"&F
+M%X4"/0.U(. ;ZR&M"H,9'2'S'=(#! !9"N(< 1JG)0X>?P82!94@5@YH%.@2
+M,B*4(S4CRQ7X"3LC(!TX(XL5-1^/!-,$F2#Y).,BB07V X,24A\+)7X TA]]
+M%/,AN"'4#L\;WQ9P#V,41A+3(&,%ZQ[.#"H;* G"%GX ]010%Y\(" TS'S<;
+M41XH!M(16!YX#'H)T!#(#  AU@>)'@ /\!.''%4:,@!!'] 5OPP[#:P?8 R*
+M(A$F!0#V#0<?RPH$"0,4"AX%%_\*@A-C(T0/?R#!&38+S \$!V4+216E(3@!
+M=AX)"!009QGH%W,001T#%/8._1TY$%@/VQH-"Z89K!\&&NP,$B.W#]0#W",D
+M'50)?@ON&,T/KA-5&!L*6";-! X+YB+[#JH0&PQG#V(*>@[W)2D$O0&* P\3
+MYA]K$V8,.Q>"(\X;=QOC%8X3=10[(:X*Q20N#C,+4Q/E)!8C#PE&$)0B;@ ?
+M&L,)E1W6 A 7G0W!$DX5)QHA$/82%0>("(8#R T0'>87R!2+)3L(2B":$$T"
+MWR/'$;4=11I9"DL8OA[C'NP*# '>'W\*=Q*I!) 5%16*!G\*$QG7!ZPAD15Z
+M%Y0=)R)O!+@3S11R F$C!A'(!(4(,P L ^DDL2 ^ ,0%[0!Q#>47!AH<%X0*
+M4 WM J 6RB*,#*T/2!"2 > /9 YT)#H10 G^$NX2W!7?(XT9$P6?%"P48POP
+M"CL5AAU9"2,+B!US"J@:X A< 98+V!3""B :Z1&*"KPBIP^<#((9=PF<'O<@
+MA C"',TE/AW*'=D390^$%/D/0 @%(B@AM@!\!9<&:Q3X'C(&W0HU'/8 X2/&
+M'BX Q0I8)3L;E@D.(PP!L0'*'LLB@ IF#/(?FQI<%D<4!!T7'T@D%1HH'L@ 
+M'"'7 @T+6AUA"8H<31XZ(MX ! ;P$'$ :R++%L4@8P[0&^0A\A9A![P@C1C'
+M$GD3&QG5!U0;T LI$5$1712;' , ,"1I'J0;TPLC' DB6R80):<)L0H!$2XB
+MZA=U#A,E0Q+S&.P8Z!5F(V8(TA^=$)(.&ACC!& C60&P(80F= &[$?83;0--
+M%T83Q1\,)2@CN2#"'"P ?@:(!)@DA1(N$?H#+AP7!]@1:Q9Q'68"AA=O)NLA
+M9B8_'FH!%1G&'; #A0T8'XH,50Y-&48#B0Y)$$T2Q!H;)H$1 01C(&4"G1K?
+M E(!8064#3L6(Q^5!)<0DP&)&%X!P1<K#T,%D RD ,T+SQ@; +P>*R.'!4\'
+M8@;_(,(!O "B"<T.K0T:"L4 YQH(&Q$9&B-! ZD$EQZ'%!(5)"-:(MDFIP.U
+M"GH#C266%)\'!1QJ$,,.M WW)$(910ND#*T2\AJ_#FH4K15G(*H!"",7"K(%
+MWQJ>!A4*GR0E%',DAP/U(;<=BAR>"@44WPU8#R0*O15()C -W DI'Y\5M1=J
+M ^D R1>,$R<4F1,+#3LF?A= ("\"%!,<$;PF.P5-"W<==!Q6 2<+S! Q)=T,
+MR!%'&8 >D".4(+\9X0Q4%30?FP=+&AH;>AV" W,0LP+[#_T"M!WA$:L*&R#[
+M"!$4J22I&#8<C!4,$!$.H@BF$2T1,AA"$/H QP/])JL4_Q=F(T,;L0T*%)8&
+M 266!V %UB4%'U0-;A(&%08G " 8$5X-Y UR!4H,BA:_%J@:C@TF"Y@&OAMI
+M%?06-1Y9!U8=3!KZ#ST9#A5G"L "QP/L(@00\B9^(C@$!PQ. N<#QP*L'RX5
+M+A?)'GD#^0QV!J07'Q5K&<<>\@G"#+X3#0@H!5X/MA_7!J$)F!M5'ST<&1(V
+M&YP9/PV.(=0,?QT+%4T$- &C"CL%?AF%)K<7;":5$W(=^ 48 S82RQTR)7<%
+MDB.E)N,%]1;*%DH77@V^%2\8; 0H"N,"70/]$7 &J1+F)8X!/PD3(,P-VP U
+M%ZDF<Q N)3\?=0BO%O<@_B L$ZP?R2-Q"9 A,AC&&,DD#Q(?)OX$P1;B!V0C
+MPR,5!3,5EB#M'+4CC"*U#M@C>A<2(@<A,Q46"1T)PP5.%101QA;N(205O"1.
+M)D :@@<L&BX&CR7" (<<_A7Z&)<>E!NH#1$ N0YW%\()OR*L%$ .[AUL(70*
+M?098%8LF+P$T)*<B'0P%''0<A@ C)6T3/QTF$NT- Q8]$FHA2@B0 \0?80AA
+M MP6H"-J U@**0)!(4\5EA=/(,<+]!#X U4,[QL&(+(6GQIC)"H'K \6')X*
+MPP8H!HL =P&""@L?_0TJ KT,T0+&(K47^R;I(MH?[B"W%_HF=Q+V%I$A9Q[Z
+M'.D-@0Q'!>06>0YN%VD4;!5H"=,::R"/(X 3<Q\S%H +WQ:&%NP'C UK(%(&
+M@R!Q)<X6;11))&HFV@F! Z -_B#U%#$=82:$)@T#2  :',0*/!S-!%H=L1N(
+M%*DAJ L )><."P@,$]X*<0W*!4\'11!\#G0#@P5(%:\#_!9_(2,#X" Z),,,
+M;!GJ U@8;A@R#TTD4"-+"2PCUA[ #2XBC0]$#(H@#@\]!#L)BAGB'7(%[P?2
+M%/\$NQ'U! ,BT0N:%,0']P[T)3HAX 4*&&,@SAWV D@A:B8V$E$)$@\S%<()
+MB0XD"[,='1U%'60CZ0<P(7(;KR*P!IPDK@A(&*8$H@[8$; *G0Z#$%P#4 \E
+M \TA\ "K#AH'%A""'^@1%@* !G0CO0>_'F 67!^5'=H2?!% &'H42!E9$#<6
+M60;R"I08IB'Z(L '8!_K#VX2E!#$!]41AQL<"],AZ!"X'^D<Z"&G U 23A$2
+M!1L&\!RH&$ 6Y!DD K<)C I?"180,!9M#U 6\1-S'E@5?QPC".L>; ?U(ZL+
+M9"(4$I(@= E;&E,!Y1^)'K4$IP/5!\X0M0D"%84++0*D$Z\1HQKT""4<[PN$
+M$LH<2Q^K%^P/<PV]! ,%NQ^F$!D.JB4F"XP+TP.P(KD@Q C=(DTB[0'W!C0=
+M'"8#&X4C?B*_ %H,2!7!!8</G"*B$B -S0XR$DXC 13>($,AG"-Y))@>]Q?E
+M'54BQPRX&V ,&PVT#,DE[22=!5XB\ XW(3D/R@ , A(D.1+! OD3,1G.&E,5
+MY18% L\;2 1J!#8B7!$['"0AW!1I!CPB8!^3%?0#CA]6(C$5)@Q;)D4)O @]
+M). F"0Y+"X@#D1#)#P\:ZQK3%1 F'221$-@5)PW-%VH" 0R8#9X!6A V"L 7
+M!PRO".,4$14P&L8FO@CA'0H9_PC=)?@/2R8Y(9P.UQ>Q#^8(G AA$G$:5R%5
+M$9@1H"%C( <A.@QP"PTA@A=+)9T,]P6# Q CR ]5"$4@&!_<%&X#_2$4)OL 
+MQQ?T$<P-/!%?!=\C\P^\$AD1N29V&\ #QB8Z"6(8B"#)#;H.6Q/* "T5;!_Y
+M&.@8!PZ]'Z4@JQQ9"'0-W 2_$CL"+P'_%DL6FQV &;TBYPB#!$ (^0?Q!&T"
+M/B+ #,$*>0U@""H?)!&9!4T;Q"%?)1P-_ 1<%1@ [!U8$(4BU@2N B ;)P95
+M#-H@UA?W!7@ 3B.&!0DF>1">#>4"N 'C%1@)7PJ/ 9D%[@03(3D'51>L#9LD
+M P.2$4 (B1DH'.4'XQ,9([<:L@OW(*0.[1M[![0@> 76$J8E02*%%@T(R".1
+M"0,AE2&,!*8>^B ](G8:Q0!%&T <;"*:!,4F&1/<$64&T@H$%+H&+"5A!9D9
+M*"2&!2  HPHO&[0C>Q(0( LBUQY%#7 :IQ@F!^\=?!6K$AP3NA9^'O,2+P/R
+M)P,#!!T&'.4B;0E>(#L)N HK '8%#@#C)* FWP\<!#,4OQ[G$6T@( $2"U<D
+M-@T?"KH.5PG'':<:/A$%(R,3"0C]!]D>4Q&A$TD/F 3!#AX;SA8E%0($\05C
+M&[X>]04G!N@,HB(U"1\,*0:Z&O ",QTE$-DCC@1=(YXEPAH_!5D1W0W.#!(-
+MJAZ:"W\A$B3#&64D(PHL WP!TA(R&9D/;0%Y"BH!' !C"G,DY0B/%9 5+PP^
+M&]LAS1," 1P78B1A#>4%!@9"!%P*)!2!&H\AUP8-'#(?;13X(:P 52!Q'] 9
+M_1,Q QP6) '7(I4=V!4T#0T2,AX@%JD-30YS ,\:I0P1#W<7'04J'"X!MAW!
+M!@L1)P"W$V44-"+E$I !WR8% [8>@A8Q#?T00@_1#?0/+ 2['<L7TQ$Z'90>
+MO #E#7P&CQET PXC:!/I#]@4O &H T\@_P2^$=,"^QO^(3H'>!*\"M</!P C
+M%5\(%0W%#/D292!P"\<.,00#)0,/\0 /)+,=1Q2M!6D"PQ&_$;4 #PCJ%\ 9
+M.!ZC(D@(.!;R#E(/!A@B'5TC-04"%#D.DA/,"@($Z@$*$B D: BI!#8@:PQ+
+M%40(TA?>%>,2]!"L(+H%4!Y6#OH+$0N6 ?('%A3,(5</@!*N%Y84Y!4"(-<;
+M7 ]>%OX9;1%\"=8#K@&#'L@!-@B2 Q4E- ^:&6(21 B2&W4%OQX.(_X3?0,G
+M)N8+BP6 )>$DF0_+ K(@^0S8(/4%8!-X!0LB:"&))D AEQ\Q"T,A9R6 (:0?
+MT1^=%/0=G1JI WPCR1RY%*,;,A*?$CDAO2$_()\EBPS,(WD0Y0PX'$ C-B9D
+M&ZL(F U.$W ./A* $^P$[Q[O!5@ 4QSE'U,"<@2=(6HF"B3!%H8F/!K*&PT9
+MX28W%NP9^P^/(88)X".] +H?* $G$#X0#@['!(,'OQ !"F<.41.Y('8).1:2
+M(R4%L@F%#UH%LPRZ(M,6<2,S!#@B3@M0$PT-PAS('WLDJQ,'#5DCGA@%%<H+
+M+P%%$6T>5@XC&LH:P0/Y)P4=&@9C%FT7GA_9!JD<J04_$9P+? B!(&,.5 ^4
+M'#XF#20\!=0C9!;'!WL0XPS_%"0=TA8C %T&3QOJ 8 %>QT: H@!C0TT(#@%
+MT""["+4C\P'A(\$@,0+!)3T=40O'(VX ?1'[(.D4"R*O"Q<0+!?P%C@&$PJ,
+M%_@EZ" ^$D8#U0$()+D<5PW2'[0)% $8&VP0#Q2R)&,,4P^L(1P*; N/ A\?
+M805M#@@6^0^"!S4$0P0(%8$DD!N4 IL98B<"%XP7JPFY&.@:<R&'$'D/BAF)
+M"<PD#"9F"W4)FR#K!JHC(Q7^$ND47QCX&,86BA.&)!<87"-$%HX7X@QX%?4*
+M=@C*#RD*!R.D)64&C D(!5@;- RB$&,F#!/')&$@:P)C$C$9! 4_'L\B=B %
+M%G(>?!57!_$,'A>O".@9[00;":H2M CO'P$F5@VK'(T&91P9&OP52PRY"W<.
+MF0R&(5DF@0MK IL$P@Q&)'@72",C'6<( 1UB(!\6Y@3&)1@(A \:(0 : B3G
+M S,EC17&)&4'"@P["]8B.P_H#^P=KB';#V$&?!.N +L5V -((/\F[Q(;)!4=
+MKB9X"ET+Z0ZF%D,!]0X4"9@ASB3S#J8*K1PV%OL4NA0W(A<)@A(Z(LX>- FS
+M!&@@X"!4$S@4;@+< 0@2#A*($?\&Y1PR&)T4I!;7)$XF8QOP%%P?*QV_ 5HD
+MUR2N&KX1\ ^3(S(7V1MI"04&A"(<'O 3,P"]$&0*(!E=&/T=+B#W ?0<*!/B
+M'HD-4@0?#-T@#QM8#T@"<P'1%Q$92@HD">X#"@$L%O<!H!%@ -$8$A]_#JL<
+M&!:/#;,)V"9N'O<!5QTK'U@/" =;%#86,"+#'B<2"Q5[&IH:1!O3&)(&S"%J
+M%%<&R0+U(AP&)@;1!.0 :Q/# O<93PG+)8<8>QIK)0T'&@:4(*@8G!')'HX*
+M)0<^![<0CAR2(" :,2 '$G<>(PLG&@0&RPU.&8< *P3: 2@>20?9%*L#-0 2
+M!40:,!1J ;4,E0>J$; '0@$<&\(", D< : 9HADC"GL3OP7-#;HEFP2_&#T%
+MQ1F;$D\,N@ZC)EHF(@?"'%L ' F])HXC7 :X(<4'"!3/'5<"D@H]&UH?]2*B
+M!$ 5CP#1!LP><0O&!)<44P^W&9H(WA1/ UH$3P27)BD#00ME&U\*4PK/("(/
+MZ1A*%[H$MQLE#[$9[!87'Z C7PGH(^(BBP53%&0,ZPF(%WDEE!>B!%L21 [/
+M ]$FM1S#(M\8<  ^ B\4T1AE%CP5CPEN%,PA3A@N)/H/'QD>%<(A1@P$$;0A
+M9 2)#TPE)P%D!=,'510_%[43'B2]#GL9 R*7%\T9%B7H(?<-I@M9!\0.#P.Q
+M GL24PQO"] EO@-#&PT+PP]$!^$4GR @$  F"@.%!2@(=@3O)BT&5A7J%R03
+M+QWO%>H"#!H"%4$ LP+M$&L/I18C)'D (2!Y 08)-R67(5P>U2'7&X<B4A'&
+M#EX-=P6 ')(@70Q_!RL6:1V$''XA_Q_ (V$@TQ ;&BP:7P7+).D!V1"4(LL8
+MUQ6Z![8+ZB#^(M4 ^QG6'MT$VR6C#&TAIQ2 %!0DAA06 $P9Z1]6$GH'?AG/
+M'Q0> 1^-!%P!#Q7'#R8!] FH&UD6ZAQ1!P4F,Q?#&QH89!>9%ET1\"90 5H=
+M6B&'$.41!0C_'8$("1[! ML.,A-'&=0#X0%5#^<CX2:<$DX'A 'G"$H-WQ_=
+M$*46K",O#Y\;D@MQ#N48>B0@#I0>* MT$NXC,16) 8(6ZAHU!*,+_1<[ _$&
+MB109 ^ (@ #X!? '8P$]$$L"]2$6 HP;JR"2&5T0TR"3!<T@4B4.%1H? P"E
+M&\DEK@MO&!470R64(^,1%1JW!>(96" E$P$:714K _P;7",,#*X<[ .G"QH'
+M0"39"!,8SB10 >PD>!]D'2 3:@TJ&E@D2P4["\\E,!L: >L='""G)(4:]".E
+M$(H0E1,6('<($2/E(O@!+Q=&'&H7R D)$:\>>PA]#+L@D!Z2"FT!;P0@$*X6
+M'"7;$R$/'1\H "D$5PK=&[$2 2', *0?""-'!A,5<PX!"[</#"#D'EP#R1^X
+M$^X1-@1P!9T+P AE E<;HB:D%<LF#Q;+(KL3CA7"",,!@!G1!&T<;R+("R\+
+M^@?>(BP1;0I:!TH!(!M6%8P/.02.)D4A4R Z'I<.< -F&V\!A1V&!\\@0@?^
+M'5D*^R N!)44" !Z$D,<11_V)-H,J" <'7H@IB8")?(B3@NP((0C,27^&V G
+M#18=!_$$J +Y#[4>L2,$&)P,!A(7#RTB?14D(5433R;% ?<2)@$H(:<'%@LH
+M'3,7UB+U :(E1 FP"%$<]B:K$3\)= E&(?DA "#%&\,$Y03<%S<>1Q</!^4%
+MPAW2'(4"S@QQ(B4*P0H=&\<:*PI""18.+"5/)L,(-!#9'50FT0-9!)L'/P)U
+M!Q@3EQ'W"H\)/!0="7 =I"#^)H@F$P-4!Z88]B/[ F4/F KP $\:UA:W'HTB
+M'2:Y$B\-9A9] ]HAK1SN(;4=Z2/8): &O05;"0T?R OI&QD23"8%!JX6I10Z
+M#,4 O0@O#0<3=144$2$2T06]"/$/^PJ&'FX?^ Y3$V\:YB0P LXAV0&$ L@(
+MTP=2"]<6#"6\(>LA*!/4):LE'0=@$]D&<Q'\$18?L EN&=0FR1AA%=P$: @W
+M$!(;%@X2!Q\(GQ6:"Z0*8A8!&A(>8!/M(5('CQY !9 @'!_ $T,%2QZE&!HF
+MBQFX&Q<:BQ0K'=T>NQ#Y 5@$ @HW"D$?U1.Z&IL<@R,;'-HA:1U]"V82C .V
+M(.()51UB"-4 _R+N'E<7>P,T(O45C0'J%/T##2:M&"$-;Q)?!N$4 1UN')\2
+M'1*S$-D,&0R"!DH*S ZF$2H@#0>+!#44'P2;$<44GR%*$F<,\Q(B%TP;'!M'
+M&P03S"27!(0EYAG0 IX PP3? 4@<% ^B%LH4NP*L(P(*RAZV$X\EUR;+'R08
+MP1"!%?,39"%5&&@<$1#8&'D6\AC$$YH9_"$*%O # @(J!18/VB X$082+!>(
+M WH3"PJ1%= =<@/0%<,!: <<#507EABK)&,9H1!E$E(DSB88#I4<!"54"^(2
+M)Q3:&6D4 0BK&? @400V(GL(*P)O&L47Y25&(3@7,0@6(L8/VR%;(; ?K1'N
+M!EP8?"3U&_TE$P_!$'P@Z@&,"G<'.R&T#T$$4A."".4:<1%4#;(48B*;'00;
+MUA!A&;P%\AH""'<1M0I(("(!U!0W(-DC0"5<!T<1F"/>")4AT2%1!@H0J",V
+M&J@ :A3M(!4C PT, GX&>";@$;T$(B)A)A\(K@MH!L<6^@%!!D(*AR(\"4\D
+MC1D0&<8+1A"!#P )J0A<"_8?(A^)).4(0"+5"B0 JQ73 @P@'A?[#S<F)PF&
+M"78'U16!$U,2;A2N"><?+ .W(Q@%?P6@#=8(5@SU$J( @"$"!YL%M U@%@$*
+M%@*) @<@#Q?I%_LFIB;\!JXF*11I 1P>%PI (&LBZPX,&@ +>!*B ),*LP>4
+M(J,25B4N V,+_22[)(0)N@21(3P#51]R (,.V0O4&6H52 C4(LX7'P*>!+@$
+MP@#D%]H)]B6J&&T%$ALA)F\=Y0^-(T01]1)#$QXD+!HL(T$7.!&]%#(/, ?J
+M!F\@Y!!W"EL%6A:M'?0EJ2!D$G$4;R"   ,@_ @V!BT+]00*%5H#CB7U)GP:
+M;P$]"PH3/B6C!78DR 1S&CD$2"2!&E$")!O4$3,)AR)F))43G24X)8T8)1(9
+M)8H*.29D#'L,ZB04!G($3Q9%"%,+?16%%;0'/03?"Z<4"2*%"C\F?1^W%I(F
+M Q/R&KH?.P$M&J0(/AS-(5L.#QK %KT4P@O])AD4)R&8'C$7, .<#%@3;0\)
+M$XX-KB5/%-T&001$ ;$&)!<Z%Y8-V13*"6LFH1W9(L08,":"!!,2RPSL'F,)
+M\1\;&9X 2B,;%EH3H@M!$F\3W"0Z%7$%,@:6)/0152#^"!L2N!A+)=4"9!9S
+M$8H/6Q9)#?\2IQ5)!I\9*R"8(3TC^1EG"Y4;+PJF!EP!* F/!9X'>A4*(*H0
+M-!-S)+@@WB14(*(=:R;>% 4BD0M[!S<?&@1D U,+?R:0%A<#'1'('F$>*R$<
+M%.(#T0X\(Z <Q!+C(=TCQ27('HHASB-L'3H&:AFR'SX':B3> _<@>QO<!N0@
+M"A7V!;0B0 V! &\B61KX(<$$O!HC%<<*Y!Z' H8+V@Q?!@4.'@"B&V\,D2&B
+M$CT!6B83$" <\P U!S0)EA6($1D5K2/M"ZP6J!P^&'XFGQ%7!#$*D27@$B8;
+MPR0B$L8E?AFQ!1XD>R#B(4<7'0DV!$4G!1]$#2P7^!#A$C$7<!8]"9X/$ _Y
+M"=H8 "!+#3 FPR1P%<X*M"#M"^<!_R1$&&86-AO?$W $EQ 8(\4A31OV$!<@
+MJ0<2$=8"FAAA#S@2?0YP)8H4]29\(C\%%1;O(5L"JA."!#X>A0-3%UL*6 Q"
+M)PL1[P$'%'0B,1S$#Y\!S0H9&\0!,A0@"K4&VA&_)$@&B @*&$T2L0;% XT7
+MQ!PH'<$"H0OT(=4100BY()8E8QD\&ND*D@]9%"\#QQLV)KP9JQA&& $C\ /R
+M")8C=PL%&XD:^2 K&3T362') XD!ER7O"1,*:@@K! $5#P39&E$D("12(0(D
+M9P6V([X&1Q!*&8T>906[(.05  #"&?L<]P(!#?H+21JS$J@/]0(:']L,>B3[
+M"#DA.1S)$KD0>27V(KL.*@;K(A$ =!6D')X/3AKN'TP05!OB%'04MPHJ#>PC
+M+Q8>$GD;.1&-$T$%WA;A(>\ 80]($:<@&!5Z$'8??P;2(9 EYB,Y!?L$QQ"7
+M S00>@2B#@,F]0;&!1$@4P?H)L 7MQ<4$,H#?P\^"CL']R%O"9X!3!_!"H@;
+M]!.1%EX1#B),"EX*HQ,' /0#]R<#!O40*  !       ! %8 _P'\ TX$] ;N
+M"3T+X [7$B(5PAFV'?XBFP      !  !  H 9 /H       !  (  P $    
+M             !   0 "  0 "  0 "  0 "  0 "  0 "  0 "  &/   0K0
+M  ,       $  @ #  0 !0 &  < "  )  H "P ,  T #@ 0 !(   !:  $G
+M$.$ !?40 -2E .AOP8;R "-C$%XM:\< !:$ S.T;SM/"$  "83XESEX@3^^!
+MA:Q!6RUM!.Z?$+-+!Q5[R9?. ,!A +GUOZM<I/'#8RD '1   1TD$.-_WU*6
+M<WOQ  1_0;$KEG"5U@Y#C06O*=L0LQJ2" Y4, V5?4<4&KHA $D-<]3'B/W_
+M:B24#PQX!!00 )#9E&5"+-=B10&:(B873R< GQ\!OVKM9&XXE^W:I_GTZ3]/
+M P 8%Q A6R]UC[FJH3*>[)U3$XC'M8X  ^$ ]C3/9C'-1OY5Z;R).DKJ'0^^
+MD.00 '&5I?%W=2EYZ&6TJP=D%;41F<RG%AO.P2=D8Z(8RN^D>R7-T>]P:]\^
+M'YWJ U]3$-',[B)AT_H(>>#&VB9GVWFK98X:QP@ @Z$ /6PP(V:&YVWD)K8X
+M-<<L;#K-\<>^+AN. !00 &-18(_9N"%T+[ .4,D^0O3NEW9H"<1WY1%T  ..
+M@>$7LCOD>- :'$8(#WGU]*=BYXI18LW5BW?9CQ"H+D,(JK(:?(XASD#SBLX+
+MA,0+)WSKE,.M)1))80":M((ITUJER^T:N:]>&++91["WLIUC%#^, UW[ LH0
+M "8->2O_?&GOX.QH':752NMF2J00!S?T]#A&,@T ]P!M7D$E?NX]+NL2Z@\B
+MX#.4_;8.P)OM>'Q94\ D9K@3H?4 $,L0F$$TB. *V\@C LI__069F\)W/.-X
+MS([YW2=KO8YFB;8  B$ B@P7NXZD5J^?J09'LC9=2U_@@-RJ"O#^V4"HCH#0
+M:QIC(Q  ><D-P.G?*;/&RDW,7E5<X2P\H&$Z2=O2>,5,!M:XNT>7AP\@/@$N
+ME9D) ]\X_0\5Y"\C=/7LT\_<",0$L-J\S7\9IC,F ^D? DX'$*7&]JM.21MG
+M+0)N/0816"GK=AC1_=-AB"+,W5\[E.Z,4+PJ<@!:X0"'<Y#[*3-S8B).-:X(
+MXL)]OM.'_07Y]SM/H50_9P=%U]0F$7'"&@ -$  >A6%;;D\J:1A[XAP$4#0K
+M+]TG[F-0<9FFR>D6CDHN*!<(;F\:21EN  (MP?=8_,JV9$LH:7R7@-!8L,7(
+M+6L7=[<<Y0333C$0-J^+TW/4:5SB4@%#$.1[N%W(TN94AS<(&(2>+QIXR5#[
+M;,?#E':86LQ)3B@IUOEETUR)53P,@Z$ #NO3K:=!3^3WE3XA71S[W#*_7QXI
+MR]79KU?2V(2ZS+]DL*+]MQF%WLHQ >@0 -1!F!9[7-/%.( .UQ\[3_5K7HN>
+MF#-R\%<1,$'!S/DP.CW*+5EN2] N?95: $HM@?O#T/12(BA0MP_R\U<3%!/<
+M0EU]UCD9F?A9.!P DA36AK-WN7JE_F$2MV%J  M_$'@A8:IP L&(P!90'GM"
+M,WG5, 1K(-0)0!AXZZ5/K^=VLUV_'=^4O\8S0#][O(T  6$ G',2]%T'X9=X
+MY[$OSEFY7JK:M#=9[%D"T.GA"\?D?8B$(7@NHFE(?1%#O()-?T/5$ !:_7,?
+MY%0HH>'<3F*/F0=<_^F^@:X_Z]B;)-V07):O %PWF0DWYJN85#^8PDVSO",*
+M63U!^-(BT#/GI_/VEE2%CZE^K[8<F@' %E(\X*S%+OX@/R/]HI^YZ@?W'B;Z
+M-W\C"U%% 92[$)1X O=TP(P;70"P\,9UJ=NY%.+9<M]E#TM,=RC@%FWVD<)1
+M0\G/)Y6K5=;BYB><J+&F #TA *P+YQ>,<_" Y6"M,%5/&/BW*UC-28VK=U@K
+ME?UMCGN1NN=?;3)62QNN6O9$=#F%GGQ':>L "1  <KD,L&]SG6X:LD8 >%UD
+MA -_X\,A7..I*=GX1)'"X,?R2JY43>_67J<5VMH8(WV<J=-^IF^Y  %= :R!
+M?A^IX>$E9!*[?G:=H$;QN#R _J?/3.:BT %SK8SLUCABB</$Q07]'OB4H6[5
+M6DY)/>,X'/<0?4"U0OA.SSLA>ODE<6O >3OT;.)DJZ^;-\%*0;6-U&8! "A 
+M)TDQ+X'P.]_^SB1!)!Y_(L\Q"(_A +FR=3R"B!:3S3\Z:XFTA]X(GD5&:$VF
+M#/W;DY'?).P3,&A$)YFT0>ZV@<K#6 )1\=EH):)]=G&- 4X0 -MUE!7R8^(:
+M<&$3 1 J9..PF_^P2F%$JE0&=LR$Q,@\ H4ZTQ&F>%09'WT)[1#C?7L *4S7
+M'J;T"#, ,XS!E<Q1R#R<[Y!H-6N&Y:>V%.7RE!,[^33:C9(Z8+P"B=W2DFU9
+M4_%=3#-E5!1F_-*V.X0*+;P38:G)<  ',Q"&.JM;FCKR/[K=,D;;V)!*6.A)
+M1L4HC,8?,%N:%PAE@'PIA+$&OW6/IXQ5%^"4]1;T9H;DI[WV0K7F,"P  :$ 
+M06JG*Y/%U'A]QNKCK2ML*_R$2_!UKA1U6'LT8K9ZVX,1#%4"F2\B]]ZP[ "B
+M.\VD]<5/BEMEB[B-\]*!+FD0 %4Q":M8TJ8,)LM688.':ASTP76'Z'8L1$?/
+M0: %GLD(!CZ@NLCHY\_ 5>'Z1++O 7ZP)" E<]%R^8'DN 6N!Q7,@;2OC)E"
+M37,&,OO6GOG1PT .R)-/0[@,L83U=>/)6_2,8I/_!B27&Z]2^8N;(8O?>#54
+MX;-ZUE\%>9+_QJ4M 11O$!,D-"+U1"1]?CV#IY3/&AZ"2T Q6?K,9:0_!WF$
+MK;MYLX#I:G%9:84BR6-96OU$GD-9:%-IT,8.Y9\X[%37-G0 *F$ OS)S"[@T
+M>#PT8;ZSZ@9*E)6LC?&_:S<*_"#_GZ;S.L[4F]@#R"WLF]NIR=Y)^&G"SP@T
+M=ESKDP6Q**7)%Q\@,G#O  80 )_M^MR S</;'V@X+J=Y6/6:(:SF65@3U:IF
+M66B;,2A9[ZD5H'[&A3N=JI%DADTU:3BC8/>CL0%]0.\6F$0\I*=\V?N;'$%*
+M)VX7KE?L8HFJ[R+[W;:B[^07X;WR,V:(@#>T+#Z_N-Z1&:QD"-3T:DXU_VH.
+M9U:Y%$#;.\IX*IMH:S+%V?6O:;PF9*L0E[]MP#<\SKJDL34AC4T^CM8>Z:K 
+MQ-U;#]?\%#Y?"D =4?"V?&J*@Z=>22C+'9^.K02&[8R%\;^@U6C6?.LB(&4]
+MLF(%VR$ KPHS)ZA_2@UAFW(QE^N@;_UKH4L+Y] :X#;/JH5F;80MH,G9$5JP
+M+-T"Q DG^;G>A)BD-A_F2F&E,S_JJZ\5#Z0%(Y+5Z #D$ ![J3XEZ+ZUA<'\
+MJ/1=' <>/"NH6P@,^7%=( +6 ! (FTJVLX;J;+EE.0'!28QY=?F-W)&;(6YQ
+M[B.)O=5ML+0B!H:0)[OMZN, (GP!F"Z'6[[3GW+8V2^'$A50QFO>;G#/2M@/
+MU95Q;B:R9K"MQC8D'1736CQ"5 YC_W/ S%7O%V7Y*/)5O,?W@-SMW/1N[\Y?
+MW%/W  7G$)?+:>@FUW(^M.2JAEN0.2*<,P=U2WKID2U'^7>:;D#G%@OXQ R2
+M\!#R7VP1)<.+0LGYD9US"WRO!?\MA;!#=6DM*X0LIE?O$- ?X0",\0VI/IF;
+MS1NN+?K#!<X8D.=B)4[#NY3)$[]8CO!7 !>7:YTM%7+KPY%]"R&MQ^.CSR.A
+M\^B%?4OV'#I (G!U<9K]I+J:>F'?:A_!$ "H9:\1.J4!752F^=GZ4Z=!7N+;
+M;+ I4422SWPNG#*%SX>VJ&D4NP*189F;AXCD&%/D<-H.F^^(!TV^I3<T;N09
+MH,CGE493B8DO3(4G!-CKP:'!Z 9)PI25N7IP3X%"=:4Y.F,+BR'"5MM&=!+]
+MQ4G*FD7B8D,Y:/185&'[/Q-:MN6[236I.^*AP$PB%1B0ITY$V"V&@DN=O$JG
+M2=$ O2,0IPF##DV'!Y%$3"H],T.1"7N3YFO(+%2:? <@E?$&B5@RDBNJ!1O%
+M@F%#:BKE(V[_YH?)79O;RN*[5'&G?C-:GT\'3.&8HI.A,X%_=.(3 !RA -3I
+M;%Q];YODV>?Y.V^A=V(T4<:+6>C>*]Y8SSS_6")&?!6H5W59)N=G4Q=WMV/K
+MY@I?X_TY:3/HH#6H!;F']C$/0R$?0]O86O66JQL9HF@_  00 .8AZCS0>(UC
+MYSFQ[Z<7=2BN1YVK%,M]:&]F.:U]'_56^8K97OX_L5<@'Z@TCL3D6T+NS&6X
+M69]"'CM;PD,3]E].P,U$G[U%^E1C]"EB.R#9K"AK@>K=<ST*_S@CJS@-EH/_
+MQU "1U&_L:R3@@;/D[V"=\0/#?.>&WT[U?]T)N'J.'B3N#.&,\ >0?C]3KPD
+M,.DL49<\1.8BC?]EW8YP1?$KC=^#&D1?$&DWHJ::A=C=1!#-@!L"N203V35)
+M6SDA/ QR!]I>^YW8 AH T>C03 LM!]99\?A,';CJ@]S2]1]MM;Z? TQ%/@0L
+MLYE2W T>>@:+*\P^?//5(EH$ F$  O&$;@0A4&32%V)B'7L27VC0=I=JL46K
+M*C*UABWBT_XOM>1B/1^1-NT*^VX(-%&\0#W=]Y9NL@!2JX#K7Y.'XQFF&?+3
+M-9\SFE;1O])NN=@ U)-> )P0 /3="5)=14+AKK0T+J.SHV\_S7INM"AW]TO!
+MR-!GTOC@KJ@[9ZW)5K-LR)T+E9W! %M(BCU*OC;T4MGH37';(<7Y'($)2D78
+M:M>J3'P(X:6<=9N( .0\ !?[03A\6+R#2V%T7XB()CCJ4,!RG&TN.^TU7DB/
+MF<2]UZAY@A:$H,JT4;J.25S&)M3)\_R]LO>FIT3R3'2>(C"OVN>5DCL M_6!
+MI<RHX+L?&@_UD?)\@*5#  .;$)(6.%ZO.M=(OUY:\TEF5*_Z$N9<ZGBQ!%H4
+M@U*UYA.'E16]V2M\D(X0" P6QVBJ'+6@]P#VOD:-?<4;RLP1YMVXAL;2VU!9
+M879(I^H)ZE</_X]>1)POCF<A ),)[BK2.8<\:+G18RY _R-L"X_H$J;0!\A"
+MP-Y\:>4QATH#3[BXL8).CAW24%@$+=/UB[:#D EVZA25T%Q--_,5FH=( U9^
+MAVHC-JQ>/[MSSSAG/OI2KT05NA  E)E?#_;GM]//,CLJP_-./I2>9OR*511(
+ML=[^;N+]W0O=F%*4E $"3Z7VYQQR#"H2DO.5MSY1I7.NL3"WEJR21=@I;\MD
+M!'GR"GZN\H5'2I&8&@5^,N%V<LQ> U"; 5"<K?''W*TL.#U--W/&9]#J;:@&
+M49OR^,0#X:*@4B,ZUQ!SJ42%V;K/$A@#<(<ZFU+<4NCELOM.!Q>F+[Y-U^$*
+MJ^U/C&+L>\ZY0"'49H, H15UYLSC*?*$+P"!UQ#E9J)<'$JE/^D\/01R*#ZJ
+M4:>.)=!3 _/:0^8(I8TB%N9@&F"<]OP4T%@4R)T:5]NZL9,DA<:Y[!C(C06Y
+M*^(9V*#?D-A5FAL^I2B;VBE0:%A-@/1U+9QC<E;#.P 3X0 !,$S!(V;Q0=#V
+MC]9#S^(+E/^1Q;_@8_G9RKG-]NF4H@LS:2=-9N4SD_;D2LK+\JBO=\J\G-.G
+M*2#>EQ@U- S1#( *#IIMW[(DTS _Y\+_R4P42+E!?>T15SQ"(@/Z  ,0 (55
+M,S[,%@!VKC"W0MOBV A+;38,-#Y+UW'A^0L)Z1W-CMZ%)7!K(__<6:$SO(7A
+M<3UV:H81'\E^^6$>@U9.K"Y)],3(0U@PL)12HHX1?+[M]$?&*RWH<@Z[[%UO
+M7[=URTK!NC@C,2"$,Q*<M$@6V@URQD!"OA^&:'"B3Q!#D!E3Q&P+'&@!*A=:
+M#OG/(^AJU//&&\#;,<Q\>\X#/4N(T@OEA<_(NX;E1LJ-X8$4C0Q[,I(4]E2]
+M2>'$)]R<ZK%82A'Y$Q VZ,9Z*9[T%C\*\TFFSW>E(Z.DOEN"S*)R+S401'^^
+MG1.XJ,(R3LE,,ZV\GOZZ=JPA,BY,S3(^$Y&T</[9-KM<EX5"%!K]1LS=^.8X
+MA])I!]$7&@+Q_CZUJZ[#N>YO' @"OJ$ R6@& ,HIH;F;WETN&P^VQ"%Q0U"?
+M0X86:RG2;*D(WT-@E1TB(* P;;2'X\)>9\6>PSM]T'@PY7^0N-@;WIW:Y-?F
+M1%Y$Y83>LDT-7IY!MBFB=@X'U=BC/$9QA,+MS1SA(B< :Q  AQ%^N^)Z:6BH
+MC>RH""=,86GS:AHS==.M!@6K&NB;0OK>80[<;G*FRN#3Y:NZ,'I'3M>JRN8R
+MPT8VA+3%]<F,-ZG&N-$[OBIC]!9#%,T:N;4]*PHZ1Z1X8;;XY-\L$3E9%]A8
+MY@ 0"H%]3-#VD0X3Y7PXEXR.3J_7I\H:@)VJ0YRHBT#+:1ZW2).N1V1#>DNC
+MB?X6"Y'9P1A^IQLO 8"B#%>A%R5)\=O%???*$\1-H==B?M'<39M\!H+U=\]7
+M_DG>8MMZ_"M);D"< WZ0  )/$&I:G'Y2PC=R3HG?M-W_U"9==$&:Q*L5SL !
+M$V<MPWR*V-?(R-B$F7M=:B*^+^W/P7CF[T.<)?3Z&<DBKUF8RIBA^)EH'J7\
+M9'*1L,>6M;8WE3P9ZT0H?4V5]2+5YE2JFD8"\,YA;P       0 "  0 !P *
+M  X $@ 7 !P (@ I #$ . !  $D 4P!= &@ <P!_ (L F "F +4 PP#2 .( 
+M\P$$ 18!* $[ 4X!8@%W 8T!H@&X <\!YP'_ A@",0)+ F4"@ *< KD"U0+R
+M Q #+P-. VX#C@.O ] #\@05!#@$6P1_!*0$R@3P!18%/05E!8T%M@7@!@H&
+M- 9?!HL&N ;E!Q('0 =O!YX'S@?_"# (80B3",8(^@DN"6(             
+M  $  0 !  $  @ "  (  @ #  ,  P #  0 !  $  0 !0 %  4 !0 &  8 
+M!@ &  < !P '  < "  (  @ "  )  D "0 )  H "@ *  H "P +  L "P ,
+M  P #  ,  T #0 -  T #@ .  X #@ /  \ #P / !  $  0 !  $0 1 !$ 
+M$0 2 !( $@ 2 !, $P 3 !, %  4 !0 %  5 !4 %0 5 !8 %@   $8  16@
+M  8<@"48 "H"D!WW$HT!&090 [L"X1I8!S08(!TN&),EC@H5""D  0%0$2L7
+M+Q#Q!9(&620,  < 8 MJ$V,A4@K*%.0:RB0- #,%L!JE$-T1_QC!$AH#JAHD
+M"P<!5 &@ E8.'PI8!R,4[0Q%"_8'P0+I"+8+H RV&9\+RP9<((<.9 <<(T4<
+MH@"C$@<  100#C\'GQ@;"5TB[R/L)<0921]U 9LE\1:4  D+4 U[$B 51 #K
+M$$$=\@D0'M8.^Q^,#QH&QQX> #X(T Z#);H@RAGP&K<890ZR&/D(]P\B$_$!
+M+0]=#K$!FR0 !  $# FQ#]D0@1OH',,8HAMK!>0:#B9"$\<:#R;:"H<F,"0M
+M!]P&1A:T&"T:VR#%(%(A0Q##$X\,X0N.#P,2JA)B'?0  2;0"Y,CJP^G%GX!
+MB@(T&:0F=@S% Q$:WQ.0&[H0BQ@S#I,#?!:@  L60"!<(< *(@GZ(MH3&0?0
+M =H&LQP6''HDFARX!<@,SQ4J"@<!:"*7 $L+\!V!%-4;9!<](N,/B _.' 8<
+MLQ/7$=$ 9 @D!;P(R!6B&14F.@XX#* !\1]0#6L+K0T[)94#[R7&$FX&]@ *
+M%7H+J@VF'@(!^1'&#!T+AQS4%#D810H/#+L9L"'U)90 %@_7'GXE_0BM%[X;
+M@1M2&7\)- '$%XL(0ALK&Y43G2 O(XP7("'_!4\  A* '7@,WA+K(;8"3B(X
+M(^H)02)J$T,D8!7;'B0@\PHJ&E(4G0GG#ZX&/@K+(:,!SR<   TA,!(-$Z,)
+MB!S]"O D$!41$[,>"Q9Z#>$35@F1&DLFY"&Q'<\@FQ^X"Q,9*R&<)8(1;QSG
+M %L/$!UO)B$#$R'*)-L:,A@(#44!K1''&](96 !J(J4"$0RT!M,C,!MS'F0;
+M> ^""_< 90!W"-T"61J@(T88AP,F!APBD1AN!9(7XAPJ&^T<,1"5)'PE"AH+
+M&9 *D"8+ ?L7^@"/#ZH*YB/\).<'JP?6#V0-,!*-)?\,8PX&('H B130&342
+M%1 7 *@=Q@_@#>T"DP4#"+L+#0)##.$'4@$M!K@7'R,%(WT?EA-[%KX  B5 
+M"APF12#5$Z,F:0MH&C<B%2#U##0;A1E?(#\)K@8V&V$%6!=H#RT79!>W(:L/
+M-2*8(T<,] XY! 8,T"0. ! %$"6_#%80OQ'1(/8E7 36%<\10"8B!CX)O C*
+M"0@A)0C%(]\"J1GF$Z@@;1'>'\D)'@Y)&:<@>1<W$N B2"-K &X2, LM%X -
+MSAYQ"F4&1AAL%><-[05@ ?L8+PD<#XL?L0]8!PX QQ_5 EH<EA>T&0T1 0'%
+M(K .WQ-$(LD5Y@E](,,"UA7P(S$-  Y$%%P)0B!$!CX%+@H> X<6C!HK @T+
+MUR6N(8,.LPVN$$D7O1C^ 9<(7 #P&,0*6PZD(3L!E QK#FD8TA &$IL L )U
+M"R4D2!V/$7\+3P*6!+X;$Q=>)>\-HP$R"_4 >!FB( 4&R@GI)7PCQ!/=)>\*
+M:"96'3T8H21D"/D&/0Q")L(!.Q+W!,$  Q#P#.$@BAN9!O<4W1>^#M\3M!\D
+M!N\D6"9=&O0>%Q$<'U0&/!2L&%, 4P'Z CL-8P8-'ED$_@W4$ET<41>C"8,B
+M-B*B)(8CJ1'J !00  )@&5H9(1M2)/D*^Q4,(5D7HB'((84 'PK1(TH?YAT%
+M'U(;0!RZ 2P&Y!$4%>X>*R1Y%R,6O!\ !/H6UB9< /DE9B7M)-$>^0,, (85
+M4 JK"D,5]0.S#_ .DAC\&  B+Q-V!$<>LB2P 7(8)P'2&,0&EQTK(R<=,A-8
+M'DT%*@#Y YP@EP<Q$PT'$@<I"P@,Y@;H ;,:/@ Q&QT#;A% $=P#S1/2)-<,
+M$1>#"H\3[Q:M'AH1WR-K%>HFE 7N 2D%$@,.(+0<Z!.T#+L46B37&]P:\ M7
+M&34$=@A+)(D6+2"\)$DF% YS%*L611?0%GX;0"4\&5T7FPS%"=(%F@RX'O8F
+MQ"$.'AD3(QCP 3,@MQ R'?L=Z@G5!/,()A,5#U$00A'2"[H8/@L5$30!H A*
+M(]$BNB)Z%K$&$A1H%242U1AB'CL  R.P$P4>*1G.&H<BXQ/M$@<ERP2Y J,!
+M5P55#U\%<1> &^876!-]$- "9!D!&W<AWQF#"<XC#!?,&*$CM <O 'D-HQ0+
+M(RL91P/[ /P"71&V'(X/KARB !@:\!(Q%/L%BR!2&7T=]@@;!!@9(1)Y#,@B
+MN PA'0T.>QUS)MD@4"6K&&$FW16](B()CA_G%440$!$Z 6P"8 =Z&SH?GA",
+M"9T.#@;: Z0071["),441@.( *(8<!C)$1P#$A!'&>$/+QTN%-,FY0=O$K05
+M)AUJ!C("M0#+$T(C#!ZY#3$A>POE "T@A2%C&X0E^0+'#Z@@5":@(0\/WPW9
+M!T82,PZ-!!D9#1[M![4-SB%S"L<$)@R0&P<D,@ $#E(,[0<\)+8%71KN 0DB
+MC@S3!APDZ!J^()X.X@45).(9W02H#-TC>1U( NX&0P99)E +B0B;$' 75R M
+M!M@$\Q%-"%8&CR0= AP101OW'ODFV!R6&S$.P!(T!X(+.A.0"ED1""3["=<0
+M7 BM#'T*929A$1L%7P'8&N<<CB3@%F<)!1ZX#YT<RP1K(Z@9:1XZ""84+R;'
+M%#HCZ OQ%=\<4 LB(N0%+  =%ZD$DP=(!Z =Q@_=%?@ ! ]@"<H"W@OW##0>
+M!A#C'L\</04""U@,3@C)(<$9A@+ !]8E-@S>'D<#/@#7 / BXP@')34 & 7>
+M ,TB;!_[)@<!U -5#M07V 97$_ 86B *) H&S@DO&GXA*!_Y!G $.R,L !TE
+MX",R)GD&*Q&Z *L)Q0, !9L1M1-6'0@$504E(I< JB9J(WH?3@1I%B\6-  Q
+M#@43D@\A%*@4<Q)S$> #UAG<$BP4H0#V&=X311CP$PH;VB*\$%09G@(P#[ >
+M;QL^&)4,JB51 ,,;D M7#"X7" JB&/T: Q]F(^H/_ M<%VL?Q1_X)K<CP A?
+M"6 3I@IN&,P/ B%&(T0BL ZS)AD5\0-'#FP8R!*6&LD7VQE$ ^\)MA ]$-$.
+M*@L:(C<)MPQ%&&H<?R.E#JTB_AH""% %! ?@'%(!%0*T'=(&8A@%!]P"F@WS
+M%8<<U WZ)L@#IP&N#C$!P@<2#_8 '0.4 S\2XB*3 *D<:R6?!?$1/A'D!TH&
+M @S=&ML;Z".+).0E_ ;7&Z8A Q4\$Q "2A?"#N0A;A?C'.40EPA^(. "0"/\
+M ]H*K!C7%MX&*2(; *4-7@C[!P<8(1+]!,H9UA/R$Y$,)P>F')L$D!D3&48#
+M, X)%8D3'0TR%O8.X #"&<@ @ 8N$)(BMP93#WH<912I!&,C?04>%\$.TPP3
+M"!HB&":0)I ,'11J%"0 !2(@!7XBI ,S!3$DS"' %"("E!2?)=H0[!WO ](C
+M)0Q% *(,VQ3.)I<+D0_)#*LG!"8U&#<-NP[$"G8*O26,(N\BJ0=%(EL/[QA9
+M! 00F!ON'7@&.@>#!J0+OR,-&?H'@P<*(9$7S@<O!;D>NP7! "0)P -D":0(
+M-@J='I8*UR/5'78BJ"#T%5,"_!%/#MX=<QS^ "<8H!.Z&KH!@R8%$M<, P;K
+M)<@CGP"V%X$ ,06C)4<"BP4J(Q@*00=##E4 \ &]#O48(P[;'M80BPR')&,A
+M'@IB"HP"APCX!2(7QB+Z .P>L 9%(5H+'A/A$D\.A":_"D42V29T&*L4I1.B
+M(U\#41VR$<4C]!^Q 9L<:Q%,#TH2SA$[%J@8&QR8!1X"N2)%)2 930LP#_@#
+M;B&Y#K@*?A/G 00']@]!%]\:* :O(IP4B #_$A$E$!,A)(<"Q"0.%#P&$ ,P
+M&FT:ZP6#!5$"20G %S0COR#S'T81!"/ (7\%C23" /$,#0Q9#S(A%QNZ!#T;
+M$!=% T\>'P*=#WX B!P.!V@&9R,#'84FU1SH'VP841$K#<4*P _K!9P7R2.3
+M%UX L12B%_,6*A;V![<D$P,%!X8;.A;! *X  1S0&/,+7QD]#J,=. :: ,8B
+MHA?W&64<>0^X!)T+*PP&%M8 D24J%GT#MP N# L""PT<'V0.0A 7 *4BN &]
+M#/P7+B:V$,0+6P82 %<0X@7Q#(<?\!Q%&0,?M1AQ%Y<C>0D+%L@%IQYU"$T>
+MXR9['.\A7@L_!:,:&  &#= :<QOV' D6: \ $O\<* V2!;@F%!&@$AT1*!0N
+M(6$.+00* <H,'PFG WP>;A6<",4D2B-J&C4!M!.\!N@1Z@EH HL55@4&!\X'
+M&AO[(80/4@T:'< 161W_!Y\+8P?-%.T$:2)N#EX3ZQNK&RPE]!N4$"$<F2;2
+M&U( *Q2P'04$*")3!?\6S!I1%/ D61TS$:P)#0 ($9@>4B,2& ,?3 C:!+HF
+M0!#3!0<8/1'C$#P!! &]'?8"W0+U)=8"YR7X!VL3Y"2/'788BQ; (.H-?! _
+M%*H -00H .<1D23A%(0&JB/4"'T3*Q+F#2<>GQ%"%^@2C0].#S(!'B'0!G,C
+M(@<1%.,?X1"W&\L=NPH8#Q(9I24#$&4FW0P'(;L2<ANO#5<9*QXM"_@D90 )
+M'<T9QQ1J#\0?VA6X&@$:1A*[&:4&XQ*\#PH(20L=$9P5>!K$"HH?CP*.%IT:
+M^A+O&R,BB1S/)FXDMA3/!8TB123/)#X"/@27 M B6 =4)9 :!P9)#? +)1#S
+M!^\:( 1G$RP2VR.E&>(:(Q0W B0-V1V@$><'8 -!'I,+=B,E W40<0@-$20=
+M?1M5#A E>R(^(_,4E NS"*83J!NR#NX31A49(?4$# O6#:0(DR53(#X!:21;
+M%S@%X@</!TT&)1GT#)<2H"$:(7<.)!P_#%,(_  !$% DJP1("[4=J"2[" 4?
+MD0M7'XX151W5!3P2Q@I>'=\B"B! !*@'V \8%F0/3QGA((0:K1QP%64 %A,$
+M%50%[06T%(\/?A+R&+\&?PR3$\0ES CA)G<(W0-K!B(1-P-C&FT*(Q<C&T(8
+M( UA(;,!>076%[<:=@SQ"9(91A'!#8\-F0)C  @@D [7(Q$AA"+Y$IP;?":4
+M#X BAA@='5L@9!+"#\D$I ,U"1D+T! )$*@=_ Q/!I<3W":L&K<@PAX*)+,A
+M#@\Y"<D5H0$,%=L)*Q[0!08,N24;&E<>UA96(JP<5QT1(9(:1 #_&E,C0A>V
+M!/\%\@X<#+PBCP*+%"X3- ^*#<,4?@WN%+\@9@ T'Z 7!@8F'B( *PB("=LE
+ML@8G#&L&<PVM#K8@&PF3#+8+'"(5%^\3ZPEH".L0E":?%\$E]Q73)?H:D@1B
+M'"@D)@R8)",FT!8O);L-& /@(^$>@07>%049NA.6!ST#H!0B 886>")+"#0*
+M=0%*$%(7=P0((*<'?0RP(H 13"2Y$U(6?A/- 8@(MP%:)/ (P0CX$Y\AFP..
+M!FDBZ F+)#@# @DV!?$3RPHJ -063P#P&&X@'Q ,$7@F$PC&(_X0D@T"';TE
+M=1=7 TT<UR(+$CX8M0_B).@F^ YE$C<#,QAO(V@4\0*=!# E4R&R"P$5_R P
+M#$$..!%)!B0(50G:"(\<?@VH%'<%"PN1"FTB!"7Z#0<-/ !-"-T@X!_2%.0)
+M2".H$"\"(0'#"\06L V>(NP630-Q'L@"KQT_%[,.B VZ%I8/3R'^'C@-91 "
+M"GX<XA'V ;\;K!Z5$A$ [Q:S SX#"R-A%:@A3!'!"^HD41[=(A,C$PVQ& P%
+MJ0:3#=D!M09$ I$&.B&1%HL7$0]H!GL7A 4@ C 3?A-U'WX8AQZ6(1T&FA,&
+M  $#T 6#)K\AC1_V%5X0M0$V'-P+"QFA$E$.'Q(<)/$3"@GK%UL.91[/"(<-
+MER;G#<<.0",M&9H#%0NK$GHFY!Y9%, -6P3Q"Y,?,Q(Q ZP44QM*$>\?]P-B
+M"0H3- GB"B 'VAF\& 8)H0HR'? A\@4.$=P>X@I^ $L=JPI](CH@=AU>#R8-
+M-A]C)P8%=P5Y'1T "0Q '@P#/PY^!S<5JPS]$&$'TB'R .,%& TN(8X0\!%<
+M'JP8\B2!&;D:>@_7%L$"Y2$!%=4'J0->!+<2^!SX$5(?V0EA%4H%M!5+#:D1
+M#2;S(9(&&@2<'G\78 "-(&L7!Q#\$/8E:!F4$_X3DA^$ ALC=AV;!><*^!D-
+M#UX/P08P$!(>RQ_K#U8<A %3$_<C'B'< #\#@ V( SP/JR1: 2H-XA"2 BD#
+MPPXH ;4;8AC0 8D!EAYW$046D!:O&!D+6 [# 6$A3!>["JD3%QVR M8:D11L
+M#^<4^AL<(%88HQ/\'8D?@ ;$#>@*HAQV(8PF11!?(Y0CSA:R!*H)N!@7(LD<
+M=!I])($:M1';$X,# P*.":H5415O'%(8L![2(581PQI""%<3:!7, :(!  H0
+M&6X!1!#/ LX:]QM;(_H2NB)'"Z8 X@)E''$ PQ[U!;<1CQ4@):P;0"5K(P\$
+MFQN7'8H)$!HM(O\3ZAI[!2H3BQ.K";TF3PVZ!,P'0P2U)2P)$PQ! Y<)KQ73
+M)) *;!",'X(%=!JB(3$*&QR^(*P#;R:-".@#XA7@ 5X8%@<$!ZL3K0'/%S ?
+MO0KL#5@:O UO FP*MQPP"6T88ABY#<\+Z"7T#P<)FR;;)E\6Y@*L$[L&81Q%
+M#_($40])'],2% DF$\P@O1:((30E, P*!YD#K03>!Z@+SA2<&900F![5'F $
+MVR4""_<A&@F\!GX?T"8H%O8-^ 5Q'S,$<@1@#A(/ZQR: T\%+P/# B8:9AXT
+M'[,0S!QI"_DB[AX1&",2?2+&!W,D60,$#%<2_B1A'R@  1Y@%AH%^B ]!-D:
+M\QY) IP@,@J5%,89#A.W&J8-/A*!%04/Q"6,'0P/HA8/!P<!KQFQ#MX@[1#[
+M'BP(3 ^X(A8*31X^$-(F= VC)<((I1A'(ID(7P3A' $7O2,]$A04D!/?%"L)
+M"!YG'TP*]@44&T0'(R:)!%<7!2'!%,0?,P7I%8,+NR/L'. )4PF^%7<3=Q*F
+M#-D:3R&Y&!P>A0 +'P .0!O](;X0IP/J%KXBG@@N! \@#PK%"+8ER ;7&&T!
+M!B%T(24A\P[B'U@8@AZ!#!D,+Q[3 .HA;B-^ Q0-M17U&U<B,Q(  K0/%1&E
+M NT,# :A(4(6BB0G %8F! <O%_4630O_!S,50!F %$HF20 0$@H4' .G%$T7
+M>0-L('L:$ *[(B0)3 M""8 :"@=M!?0CZAEU&1P2I0R6"#< 30YP'*DDB!L.
+M&;83EQOY'_L!T18! OH9B@T9(F@;"Q^9!80'Z2-](QPCHA;.%4P&TA@=&ZT3
+MFAOD(;(8)0=_ ^(#50SH#> <901<(TH%AQ>U'O\2PQ(3(48-JQIA&PD1@Q#Z
+M%&(A&@NA'O 2-!IQ"4L*^Q3O)7@FK!I")ILBUQV@ JT-0R0)"XX!8PF)(M0=
+MQR1N'R0@KA^[%5(@5 S^ #@!^@0@!SX"]@XN#108)!@6 *4>VQRL%.0DE1._
+M"_H-?A? )G@ENAZ7&\0@;2+[ AD&-A0V"\@7Q";* 4L1R! !%/0B$QF&%941
+M<!:X)48*51Q?'OX%AAF:%U88DAUX(M(,L2*(%-08=QA"$ALEP@Z0$9P<>Q;7
+M&2(D,1[&&,L!90V:!TPC_@<Y%SL2/Q9($VTDD2'[$!,9&PZP(A@&KAM!!QH&
+M,0ST%X "F"#W H@@?A%'%6</#2;=%W82'"7=%N$9;@6@!>X@N 3/%E4$OP.<
+M)$8%]!:%#F0!Y0,9"3(=20?_ S@'I18T)+(D"B+4&>H*1A2*%+P X":Q"*<3
+MF0)3$LH<M!,7)4(6_QL%)8@ /05,!A8"U@G:&GD;(PR)#0,ALQ\0(?</XP.T
+M&3(2:QW/'Q<>Z!/B(S<=YQJ]'3H+)0ZR%OP K1E/'E0&Q  "       !  , 
+M!@ *  \ %@ > "< ,0 \ $D 5P!F '8 AP": *X PP#9 / !"0$C 3X!6@%W
+M 98!M@'7 ?D"' )! F<"C@*V M\#"@,V V,#D0/  _$$(P16!(H$OP3V!2X%
+M9P6A!=T&&@98!I<&UP<9!UP'H ?E""L(<PB\"08)40F=">L*.@J*"ML++0N!
+M           Z( !5;FMN;W=N(&5R<F]R  H          J/T  *C_  "I 8 
+M J0@  *D,  "I$@  J12  *D;  "I'X  J20  *DH  "I*P  J2^  *DT  "
+MI.(  J3N  *E!  "I1   J4<  *E+@ "I3T  J5-  *E7  "I6T  J6!  *E
+ME0 "I;0  J7#  *ET@ "I>H  J7W  *F#0 "IAP  J8H  *F.P "IDP  J9B
+M  *F?  "IIH  J:Y  *FU@ "IN<  J<&  *G)P "ISX  J=8  *G>@ "IY@ 
+M J?(  *GWP "I_X  J@.  *H)0 "J$D  JAJ  *H@P "J)T  JBY  *HT0 "
+MJ/(  JD4  *I*0 "J3P  JE>  *I<0 "J7X  JF2  *II@ "J;D  JG(  *I
+MW  "J?(  JH4  *J*  "JC8  JI.  *J:0 "JGP  JJ/  *JLP "JLT  JKK
+M  *J_  "JQ(  JLC  *K,@ "JTX  JM=  *K<  "JWP  JN3    6T5R<F]R
+M(#  3F]T(&]W;F5R $YO('-U8V@@9FEL92!O<B!D:7)E8W1O<GD 3F\@<W5C
+M:"!P<F]C97-S $EN=&5R<G5P=&5D('-Y<W1E;2!C86QL $DO3R!E<G)O<@!.
+M;R!S=6-H(&1E=FEC92!O<B!A9&1R97-S $%R9R!L:7-T('1O;R!L;VYG $5X
+M96,@9F]R;6%T(&5R<F]R $)A9"!F:6QE(&YU;6)E<@!.;R!C:&EL9')E;@!.
+M;R!M;W)E('!R;V-E<W-E<P!.;W0@96YO=6=H(&UE;6]R>0!097)M:7-S:6]N
+M(&1E;FEE9 !"860@861D<F5S<P!";&]C:R!D979I8V4@<F5Q=6ER960 1&5V
+M:6-E(&)U<WD 1FEL92!E>&ES=', 0W)O<W,M9&5V:6-E(&QI;FL 3F\@<W5C
+M:"!D979I8V4 3F]T(&$@9&ER96-T;W)Y $ES(&$@9&ER96-T;W)Y $EN=F%L
+M:60@87)G=6UE;G0 1FEL92!T86)L92!O=F5R9FQO=P!4;V\@;6%N>2!O<&5N
+M(&9I;&5S $EN87!P<F]P<FEA=&4@:6]C=&P@9F]R(&1E=FEC90!497AT(&9I
+M;&4@8G5S>0!&:6QE('1O;R!L87)G90!.;R!S<&%C92!L969T(&]N(&1E=FEC
+M90!);&QE9V%L('-E96L 4F5A9"UO;FQY(&9I;&4@<WES=&5M %1O;R!M86YY
+M(&QI;FMS $)R;VME;B!P:7!E $%R9W5M96YT('1O;R!L87)G90!297-U;'0@
+M=&]O(&QA<F=E $]P97)A=&EO;B!W;W5L9"!B;&]C:P!/<&5R871I;VX@;F]W
+M(&EN('!R;V=R97-S $]P97)A=&EO;B!A;')E861Y(&EN('!R;V=R97-S %-O
+M8VME="!O<&5R871I;VX@;VX@;F]N+7-O8VME= !$97-T:6YA=&EO;B!A9&1R
+M97-S(')E<75I<F5D $UE<W-A9V4@=&]O(&QO;F< 4')O=&]C;VP@=W)O;F<@
+M='EP92!F;W(@<V]C:V5T $]P=&EO;B!N;W0@<W5P<&]R=&5D(&)Y('!R;W1O
+M8V]L %!R;W1O8V]L(&YO="!S=7!P;W)T960 4V]C:V5T('1Y<&4@;F]T('-U
+M<'!O<G1E9 !/<&5R871I;VX@;F]T('-U<'!O<G1E9"!O;B!S;V-K970 4')O
+M=&]C;VP@9F%M:6QY(&YO="!S=7!P;W)T960 061D<F5S<R!F86UI;'D@;F]T
+M('-U<'!O<G1E9"!B>2!P<F]T;V-O;"!F86UI;'D 061D<F5S<R!A;')E861Y
+M(&EN('5S90!#86XG="!A<W-I9VX@<F5Q=65S=&5D(&%D9')E<W, 3F5T=V]R
+M:R!I<R!D;W=N $YE='=O<FL@:7,@=6YR96%C:&%B;&4 3F5T=V]R:R!D<F]P
+M<&5D(&-O;FYE8W1I;VX@;VX@<F5S970 4V]F='=A<F4@8V%U<V5D(&-O;FYE
+M8W1I;VX@86)O<G0 0V]N;F5C=&EO;B!R97-E="!B>2!P965R $YO(&)U9F9E
+M<B!S<&%C92!A=F%I;&%B;&4 4V]C:V5T(&ES(&%L<F5A9'D@8V]N;F5C=&5D
+M %-O8VME="!I<R!N;W0@8V]N;F5C=&5D $-A;B=T('-E;F0@869T97(@<V]C
+M:V5T('-H=71D;W=N %1O;R!M86YY(')E9F5R96YC97,Z(&-A;B=T('-P;&EC
+M90!#;VYN96-T:6]N('1I;65D(&]U= !#;VYN96-T:6]N(')E9G5S960 5&]O
+M(&UA;GD@;&5V96QS(&]F('-Y;6)O;&EC(&QI;FMS $9I;&4@;F%M92!T;V\@
+M;&]N9P!(;W-T(&ES(&1O=VX 2&]S="!I<R!U;G)E86-H86)L90!$:7)E8W1O
+M<GD@;F]T(&5M<'1Y %1O;R!M86YY('!R;V-E<W-E<P!4;V\@;6%N>2!U<V5R
+M<P!$:7-C('%U;W1A(&5X8V5E9&5D %-T86QE($Y&4R!F:6QE(&AA;F1L90!4
+M;V\@;6%N>2!L979E;',@;V8@<F5M;W1E(&EN('!A=&@ 3F]T(&$@<W1R96%M
+M(&1E=FEC90!4:6UE<B!E>'!I<F5D $]U="!O9B!S=')E86T@<F5S;W5R8V5S
+M $YO(&UE<W-A9V4@;V8@9&5S:7)E9"!T>7!E $YO="!A(&1A=&$@;65S<V%G
+M90!)9&5N=&EF:65R(')E;6]V960 1&5A9&QO8VL@<VET=6%T:6]N(&1E=&5C
+M=&5D+V%V;VED960 3F\@<F5C;W)D(&QO8VMS(&%V86EL86)L90!-86-H:6YE
+M(&ES(&YO="!O;B!T:&4@;F5T=V]R:P!/8FIE8W0@:7,@<F5M;W1E $QI;FL@
+M:&%S(&)E96X@<V5V97)E9 !!9'9E<G1I<V4@97)R;W(@ %-R;6]U;G0@97)R
+M;W(@ $-O;6UU;FEC871I;VX@97)R;W(@;VX@<V5N9 !0<F]T;V-O;"!E<G)O
+M<@!-=6QT:6AO<"!A='1E;7!T960 141/5$1/5"$A(2$ 4F5M;W1E(&%D9')E
+M<W,@8VAA;F=E9 !&=6YC=&EO;B!N;W0@:6UP;&5M96YT960             
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                               $!       ("     0!       (I@ 
+M   =!       (J     E!       (J     T9       (J    !79       
+M(J    !?@             "!@             "3@             "Z@   
+M          #3@             #Q@             $/@             $I
+M@             %+@             %N@             &+@           
+M  &G@             &Y@             ',@             'D@       
+M      'P@             (M@             ):@             *.@   
+M          +(@             +S@               1   >0  (J      
+M1   >0  (J0     1   >0  (JH   ,D)       (J      1   >@  (JX 
+M    1   >@  (K(     1   >@  (K@   ,S)       (JX     1   >P  
+M(KP     1   >P  (L      1   >P  (L8   -*)       (KP     1   
+M?0  (LH     1   ?0  (LX     1   ?0  (M0   -C)       (LH     
+M1   ?@  (M@     1   ?@  (MP     1   ?@  (N(   -S)       (M@ 
+M    1   ?P  (N8     1   ?P  (NH     1   ?P  (O    .*)       
+M(N8     1   @0  (O0     1   @0  (O@     1   @0  (OX   .C)   
+M    (O0     1   @@  (P(     1   @@  (P8     1   @@  (PP   .Q
+M)       (P(     1   @P  (Q      1   @P  (Q0     1   @P  (QH 
+M  /&)       (Q      1   A0  (QX     1   A0  (R(     1   A0  
+M(R@   /=)       (QX     1   A@  (RP     1   A@  (S      1   
+MA@  (S8   /L)       (RP     1   AP  (SH     1   AP  (SX     
+M1   AP  (T0   0")       (SH     1   B0  (T@     1   B0  (TP 
+M    1   B0  (U(   0:)       (T@     1   B@  (U8     1   B@  
+M(UH     1   B@  (V(   0K)       (U8   0]@             1W@   
+M          2K@             3;@             3M@             44
+M@             4P@             5.@             5J@           
+M  5W@               1   L@  (V8     1   M0  (W      1   M@  
+M(W8     1   MP  (WX     1   N0  (X8     1   N@  (XX     1   
+MNP  (Y8     1   O0  (YX     1   O@  (Z8     1   OP  (ZX     
+M1   P0  ([8     1   P@  ([X     1   PP  (\8     1   Q0  (\X 
+M    1   Q@  (]@     1   R0  (^@     1   R@  (_(     1   RP  
+M(_P     1   S0  ) 8     1   S@  )!      1   SP  )!H     1   
+MT0  )"0     1   T@  )"X     1   TP  )#@     1   U0  )$(     
+M1   U@  )$P     1   UP  )%8     1   V0  )&      1   V@  )&H 
+M    1   W   )'X     1   W0  )(@     1   W@  ))(     1   X   
+M))P     1   X0  )*8     1   X@  )+      1   Y   )+H     1   
+MY0  ),0     1   Y@  ),X     1   Z   )-@     1   Z0  ).(     
+M1   Z@  ).P     1   [   )/8     1   [0  )0      1   [P  )0H 
+M    1   \   )1(     1   \0  )1@     1   \@  )2      1   ]   
+M)28     1   ]@  )3      1   ]P  )3H     1   ]P  )3H   6D)   
+M    (V8   6L(             6V(             7((             7<
+M(             7G(             7Y(             8-(           
+M  86(             8F(             8X(             9"(       
+M      93(             9F(             9R(             9_(   
+M          ::(             :](             ;B(             ;^
+M(             <7(             <\(             =6(           
+M  =M(             >0(             >K(             ?#(       
+M      ?G(             @$(             @B(             @X(   
+M          A6(             AV(             B-(             BH
+M(             C((             C=(             CV(           
+M  D4(             DJ(             E$(             EC(       
+M      E[(             F4(             FB(             G@(   
+M          H-(             I!(             I-(             J(
+M(             JS(             KD(             KO(           
+M  KZ(             L>(             LM(             M+(       
+M      M9!       )4    MB!       )4    MQ9       )4    N:9   
+M    )4    NS@             O5@             OG@             P.
+M@             PG@             Q%@             QC@           
+M  Q]@             R?@             S"@             S?@       
+M      S[@             T-@             T@@             TX@   
+M          U$@             V"@             W&@             X4
+M@             Y+@             Y8@             YB@           
+M  YM@             Z6@             Z\@             [1)       
+M)4    [G(             [^)       )8    \4!@     " #P   \C)   
+M    ):X   \N!       )<@   \V!       )<@   ]%9       )<@   ]N
+M9       )<@   ^'@             ^I@             ^[@           
+M  _B@             _[@            ! 9@            ! W@       
+M     !!1@            !!S@            !"6@            !"S@   
+M         !#/@            !#A@            !#T@            !$,
+M@            !$8@            !%6@            !&:@           
+M !'H@            !(?@            !(L@            !(V@       
+M     !)!@            !)J@            !*0@            !*E(   
+M         !*Y(            !+6(            !+H!       )<@  !+L
+M9       )<@     1 #__P  )<@  !+S!       )<@  !+]!       )D  
+M !,$!       )H@  !,.!       )L@  !,6!       )L@  !,:!       
+M)M@  !,B!       )N   !,K!       )O   !,S!       )O   !,\!   
+M    *V@  !-+!       *\@  !-3!       *]   !-@!       *]   !-J
+M!       +4@  !-S!       -7   !-\!       -:@  !.&!       -Z  
+M !.,!       -Z   !.5!       .'   !.=!       .'   !.A!       
+M.(   !.I!       .(   !.M!       .)   !.]!       .)   !/!!   
+M    .*   !//!       .*   !/3!       .+   !/;!       .+   !/?
+M!       .,   !/J!       .,   !/N!       .-   !/[!       .-  
+M !/_!       ..   !0&!       .1@  !01!       .6   !0;!       
+M.7   !0E!       .A@  !0P!       .C   !0X!       .G   !1"!   
+M    /0@  !1*!       /9   !13!       />   !1<!       3_@  !1I
+M!       3_@  !1Q!       4#@  !1Z!       4)   !2#!       4+  
+M !2*!       45@  !23!       4H@  !2<!       4K@  !2H!       
+M80@  !2Q!       82@  !2Z!       85@  !3#!       89   !3,!   
+M    8?@  !37!       8]@  !3B!       9B   !3Q!       <V@  !4 
+M!       >)   !4*!       >?@  !45!       >J@  !4D!       @+  
+M !4S!       B'   !4_!       BI   !5&!       BI   !5*!       
+MBJ   !53!       BO   !5=!       BS   !5D!       BS   !5H!   
+M    BT   !5Q!       B]   !5Z!       B_@  !6#!       C!   !6+
+M!       C'   !64!       C.   !6=!       C0@  !6G!       C4  
+M !6T!       C4   !7#!       C4   !7,!       C4   !70!       
+MC5   !79!       C>@  !7@!       C>@  !7D!       C?@  !7N!   
+M    CJ   !7W!       CJ   !8 !       CJ   !8$!       CK   !8(
+M9       CK      1 #__P  CK   !8/!0 #H   )D   !85 P          
+M !8?!0 %#@  ("   !8E!0      (V8  !8K!0 #8@  (I@  !8W!0 &X@  
+M)M@  !8^!P %<@ "     !9'!0 $0   )<@  !9/!0 #I   (I@  !9;!0  
+M    (J   !9H!0      (JX  !9\!0      (KP  !:2!0      (LH  !:@
+M!0      (M@  !:U!0      (N8  !;,!0      (O0  !;8!0      (P( 
+M !;K!0      (Q   !< !0      (QX  !<-!0      (RP  !<A!0      
+M(SH  !<W!0      (T@  !=%!0      (U8  !=4!0      ):X  !=<"0  
+M   "L%   !=D"0     "L%(  !=S"0     "L%0  !>$"0     "L%8  !>-
+M"0     "L%@  !>="0     "L%H  !>O"0     "L%P  !>V"0     "L&  
+M !?$"0     "L&0  !?4"0     "L&@  !?<"0     "L&P  !?K"0     "
+ML'   !?\"0     "L'0  !@%"0     "L'@  !@/"0     "L(   !@="0  
+M   "L((  !@R"0     "L(0  !A)"0     "L(@  !A8"0     "L(P  !AN
+M"0     "L)   !B&"0     "L)@  !B3"0     "L*   !BG"0     "L*@ 
+M !B]"0     "L+   !C+"0     "L+@  !C@"0     "L,   !CW"0     "
+ML,@  !D&"0     "L-   !D6"0     "L.   !DF"0     "L.0  !D]"0  
+M   "L.@  !E6"0     "L.P  !EG"0     "L/   !E_"0     "L/0  !F9
+M"0     "L/@  !FH"0     "L/P  !F^"0     "L0   !G6"0     "L00 
+M !GF"0     "L0@  !G]"0     "L0P  !H6"0     "L1   !HG"0     "
+ML10  !HY"0     "L1@  !I""0     "L1P  !I."0     "L2   !I9"0  
+M   "L20  !IB"0     "L2@  !IJ"0     "L3   !IR"0     "L<   !I[
+M"0     "L<@  !J%"0     "L=   !J0"0     "L?   !J;!0      )4  
+M !JN"0     "L@@  !J]!P     " #@  !K.!P     " $   !K@!0      
+M)8   !KS"0     "LA   !L"!0 &=   )H@  !L+!0      )LX  !L2!0 &
+MY0  )<@  !L>!0 ">   *\@  !LD!0 %&@  *V@  !LQ!0 #E@  )O   !L[
+M"0 'B0 "LA@  !M+!0 &JP  +P@  !M3!0 ('   )N   !M:!P 'EP " $0 
+M !MA!0 $W0  *>8  !MJ!0 "9@  )_   !MS!0 #>0  ,!X  !MY!P %^@ "
+M I0  !N!!0 &3   )Y0  !N)!0 $9   *H(  !N3!0  /@  *6(  !N=!0  
+M    .(8  !ND!0 %)P  *T   !NN!0      .'8  !NU!0 ',P  -7   !N]
+M!0 & 0  )P8  !O%!0 %:0  -R   !O-"0 #(  "JZP  !O3!P #<@ " $P 
+M !O>!0 $50  *^@  !OH!P &@P " %@  !OZ!P %50 " &   !P!!P &J0 "
+M &0  !P*!P #RP " %P  !P;!P #?@ " %0  !PL!P &;P " %   !P_!0 '
+MUP  -Z   !Q'!0 #.   *]   !Q3!0 %I   .7   !Q<!0 $*0  .C   !QD
+M!0 "L@  .A@  !QN"0 #J  "LAP  !Q\!P #+@ " IP  !R"!0 &-P  ,8H 
+M !R+!0 #P0  ..   !R1!0      .*8  !R>!0 &\0  /0@  !RE!P #P@ "
+M +@  !RN!P #30 " '   !RZ!P ',@ " +   !S!!P "H@ " +0  !S*!0  
+M    .+8  !S1!0 $?@  -:@  !S;!0      .)8  !SJ!0 "HP  -CP  !SX
+M!0 $5P  -M(  !T$!0 %:P  /9   !T,"0 '?P "LB   !T6!0      .-8 
+M !TB!0 '>   .1@  !TM!0 #HP  .68  !TV!0      .,8  !U "0     "
+MLTP  !U%!P  /0 "!1P  !U,!0  *0  .G   !U4!0 $U0  .K@  !U?!0 "
+M?@  />   !UH"0 #^@ "LJ   !UQ!P (>P "!=0  !U[!0 '>P  3_@  !V"
+M!0 &^P  /<P  !V)!0 #<0  4+   !V/!0  5@  85@  !V7!P "QP "!=P 
+M !V@!0 &T   4H@  !VH!0 '#   4#@  !VP!0 !&@  B48  !V[!0 (B   
+M8LX  !W%!0  "@  80@  !W-!0 %4   7C8  !W9!0 #_   3.H  !WD!0  
+M)   4)   !WL!0 %QP  >)   !W^!0 !F@  BCP  !X)!0  :@  9:X  !X3
+M!0  F@  B'   !X>!0 ("   8?@  !XH!0 "%0  3GX  !XQ P $6^      
+M !X[!0 &\   4>@  !Y$!0 &(@  4C(  !Y-!0 %Q0  4F(  !Y6!0 (!0  
+M4G@  !Y?"0 $S@ "LJ0  !YL!0 %>   4;@  !YV!0 &M0  4=   !Y_!0 %
+MU0  4@   !Z(!0 '(@  47   !Z1!0 &%@  4DH  !Z:!0 &V@  4A@  !ZC
+M!0 %MP  45@  !ZL!0 %P   4:   !ZU!0 &I@  48@  !Z^!0      BI8 
+M ![$!P 'B@ ""$0  ![+!0 %P0  5Q   ![<"0 !Y0 "LK   ![G!0 "_   
+M7D0  ![T!0 (G   B]   ![\"0 'OP "LL   !\&!0 %QP  4K@  !\1!0  
+M50  89   !\9!0 &>0  8)(  !\G!0  6P  5W(  !\Z!0 &YP  BT   !]"
+M"0 %\0 "LM   !],!0  $@  82@  !]4!0      BS8  !]:!0 (10  6Y8 
+M !]F!0  (0  B_@  !]N!P &Z  "!N0  !]^!P #U  "!P   !^)!0 &8   
+MC'   !^1!P "7  "" (  !^:!0  SP  C0@  !^C"0  H@ "LSP  !^Q"0 '
+M=  "LT   !_("0  H0 "LT0  !_@"0 #D  "LT@  !_W!0 $E@  <E8  " *
+M!0 #=@  9?X  " 0!0 &N   8]@  " 7!0 (B   9S   " R!0 %70  ?+8 
+M "!)!0 '^   9B   "!8!0 $H   @3(  "!P!0 &4@  :.(  "",!0 #TP  
+M<V@  "";!0  1@  BO   ""D!0 !3   @-(  ""U!0 &    ?HH  "#-!0 '
+M(   @.X  "#E!0 %PP  =7@  "#U!0 $6P  =,   "$$!0 %G   <M0  "$:
+M!0 'O   :[H  "$P!0 &C   ?\H  "%,!0  XP  =T0  "%?!0 &WP  =J( 
+M "%Q!0 $.   =3H  "& !0 "G   =*H  "&3!0 '%0  >?@  "&:!0 "*   
+M>,X  "&U!0  Y   >4@  "'0!0 !A0  >D   "'F!0 !8   >FP  "'\!0  
+M2   >@P  "(.!0  7   >J@  "(=!0 #00  ?9@  "(Q!0 &*0  ?%H  ")'
+M!0 (+P  ?@0  ")B!0 #'   ?18  ")V!0 &!   >]0  "*,!0 %+   >UH 
+M "*@!0 %E   >MX  "*N!0 !.   >Z8  "+!!0 #!@  >VX  "+5!0 &*@  
+M>R   "+E!0 $_   >NX  "+S!0 %O   ?U   ",$!0 (&   BJ   ",,!P '
+MY@ ",+   ",K!P #J  "BAH  "-,!P '8  "=D0  "-L!P (<@ ",)   ".#
+M!P %X  "B6(  ".<!P (?  "=C@  ".T!P !M@ ""U8  "/%!P $R@ "=IP 
+M "/8!P #H@ "=BX  "/J!P &S@ ""U0  "/_!P '[@ "=IH  "06!P %-  "
+M=BP  "0L!0 #X0  @+   "1$!0 &V   C!   "1+!P (EP "=@@  "1B!P &
+M!0 "H=8  "1[!P   P "=G8  "23!P !VP ",-   "2D!P $[P "BM(  "2W
+M!P #QP "=E   "3)!P &\P ",,X  "3>!P ($P "BM   "3U!P %60 "=DX 
+M "4+!0 'H@  C.   "43!0      C>X  "49!0 'N   C5   "4A!0      
+MC48  "4I!0 #;@  C?@  "4R!P %P@ "HH0  "4_!0      CJ8  "5'!P "
+MF@ "H_   "51!0     "     "58!P     "JZP  "5?"0     "LTP  "5E
+M+VQI8B]C<G0P+F\ +VQI8B]-8W)T,2YO &=D8FUE+F\ 9V-C,E]C;VUP:6QE
+M9"X +V-Y9VEN="]P;&%Y+V9N9B]D979O+V=D8G1E<W0O=#$P+P!G9&)M92YC
+M &EN=#IT,3UR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W.P!C:&%R.G0R/7(R
+M.S [,3(W.P!L;VYG(&EN=#IT,SUR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W
+M.P!U;G-I9VYE9"!I;G0Z=#0]<C$[,#LM,3L ;&]N9R!U;G-I9VYE9"!I;G0Z
+M=#4]<C$[,#LM,3L <VAO<G0@:6YT.G0V/7(Q.RTS,C<V.#LS,C<V-SL ;&]N
+M9R!L;VYG(&EN=#IT-SUR,3LP.RTQ.P!S:&]R="!U;G-I9VYE9"!I;G0Z=#@]
+M<C$[,#LV-34S-3L ;&]N9R!L;VYG('5N<VEG;F5D(&EN=#IT.3UR,3LP.RTQ
+M.P!S:6=N960@8VAA<CIT,3 ]<C$[+3$R.#LQ,C<[ '5N<VEG;F5D(&-H87(Z
+M=#$Q/7(Q.S [,C4U.P!F;&]A=#IT,3(]<C$[-#LP.P!D;W5B;&4Z=#$S/7(Q
+M.S@[,#L ;&]N9R!D;W5B;&4Z=#$T/7(Q.S@[,#L =F]I9#IT,34],34 =%]S
+M=')U8W0Z5#$V/7,R-'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R=%]M96UB
+M97(Z-BPQ-BPQ-CM< '9?:6YT7VUE;6)E<CHQ+#,R+#,R.W9?;&]N9U]M96UB
+M97(Z,RPV-"PS,CM< '9?9FQO871?;65M8F5R.C$R+#DV+#,R.W9?9&]U8FQE
+M7VUE;6)E<CHQ,RPQ,C@L-C0[.P!T7W5N:6]N.E0Q-SUU.'9?8VAA<E]M96UB
+M97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z-BPP+#$V.UP =E]I;G1?;65M8F5R
+M.C$L,"PS,CMV7VQO;F=?;65M8F5R.C,L,"PS,CM< '9?9FQO871?;65M8F5R
+M.C$R+# L,S([=E]D;W5B;&5?;65M8F5R.C$S+# L-C0[.P!V7V-H87)?9G5N
+M8SI&,@!V7W-I9VYE9%]C:&%R7V9U;F,Z1C$P '9?=6YS:6=N961?8VAA<E]F
+M=6YC.D8Q,0!V7W-H;W)T7V9U;F,Z1C8 =E]S:6=N961?<VAO<G1?9G5N8SI&
+M-@!V7W5N<VEG;F5D7W-H;W)T7V9U;F,Z1C@ =E]I;G1?9G5N8SI&,0!V7W-I
+M9VYE9%]I;G1?9G5N8SI&,0!V7W5N<VEG;F5D7VEN=%]F=6YC.D8T '9?;&]N
+M9U]F=6YC.D8S '9?<VEG;F5D7VQO;F=?9G5N8SI&,P!V7W5N<VEG;F5D7VQO
+M;F=?9G5N8SI&-0!V7V9L;V%T7V9U;F,Z1C$R '9?9&]U8FQE7V9U;F,Z1C$S
+M &QI;FLZ5#$X/7,Q-3)N97AT.C$Y/2HQ."PP+#,R.VQI;FMF=6YC.C(P/2HR
+M,3UF,3DL,S(L,S([7 !S='5F9CHR,CUA<C$[,#LP.S(S/6%R,3LP.S$[,C0]
+M87(Q.S [,CLQ-BPV-"PQ,34R.SL ='5?;&EN:SI4,C4]=3$T-&YE>'0Z,3DL
+M,"PS,CML:6YK9G5N8SHR,"PP+#,R.UP <W1U9F8Z,C(L,"PQ,34R.SL 8V]L
+M;W)S.E0R-CUE>65L;&]W.C L<'5R<&QE.C$L<&EN:SHR+#L 8V%R<SI4,C<]
+M96)M=SHP+'!O<G-C:&4Z,2P[ &)O;VQE86XZ=#(X/65&04Q313HP+%12544Z
+M,2P[ &)V86QS.E0R.3UE9F%L<V4Z,"QT<G5E.C$L.P!B;V]L96%N,CIT,CD 
+M;6ES;W)D97)E9#I4,S ]971W;SHR+&]N93HQ+'IE<F\Z,"QT:')E93HS+#L 
+M;6%I;CI&,0!V7V-H87(Z1S( =E]S:6=N961?8VAA<CI',3  =E]U;G-I9VYE
+M9%]C:&%R.D<Q,0!V7W-H;W)T.D<V '9?<VEG;F5D7W-H;W)T.D<V '9?=6YS
+M:6=N961?<VAO<G0Z1S@ =E]I;G0Z1S$ =E]S:6=N961?:6YT.D<Q '9?=6YS
+M:6=N961?:6YT.D<T '9?;&]N9SI',P!V7W-I9VYE9%]L;VYG.D<S '9?=6YS
+M:6=N961?;&]N9SI'-0!V7V9L;V%T.D<Q,@!V7V1O=6)L93I',3, =E]C:&%R
+M7V%R<F%Y.D<S,3UA<C$[,#LQ.S( =E]S:6=N961?8VAA<E]A<G)A>3I',S(]
+M87(Q.S [,3LQ, !V7W5N<VEG;F5D7V-H87)?87)R87DZ1S,S/6%R,3LP.S$[
+M,3$ =E]S:&]R=%]A<G)A>3I',S0]87(Q.S [,3LV '9?<VEG;F5D7W-H;W)T
+M7V%R<F%Y.D<S- !V7W5N<VEG;F5D7W-H;W)T7V%R<F%Y.D<S-3UA<C$[,#LQ
+M.S@ =E]I;G1?87)R87DZ1S,V/6%R,3LP.S$[,0!V7W-I9VYE9%]I;G1?87)R
+M87DZ1S,V '9?=6YS:6=N961?:6YT7V%R<F%Y.D<S-SUA<C$[,#LQ.S0 =E]L
+M;VYG7V%R<F%Y.D<S.#UA<C$[,#LQ.S, =E]S:6=N961?;&]N9U]A<G)A>3I'
+M,S@ =E]U;G-I9VYE9%]L;VYG7V%R<F%Y.D<S.3UA<C$[,#LQ.S4 =E]F;&]A
+M=%]A<G)A>3I'-# ]87(Q.S [,3LQ,@!V7V1O=6)L95]A<G)A>3I'-#$]87(Q
+M.S [,3LQ,P!V7V-H87)?<&]I;G1E<CI'-#(]*C( =E]S:6=N961?8VAA<E]P
+M;VEN=&5R.D<T,STJ,3  =E]U;G-I9VYE9%]C:&%R7W!O:6YT97(Z1S0T/2HQ
+M,0!V7W-H;W)T7W!O:6YT97(Z1S0U/2HV '9?<VEG;F5D7W-H;W)T7W!O:6YT
+M97(Z1S0U '9?=6YS:6=N961?<VAO<G1?<&]I;G1E<CI'-#8]*C@ =E]I;G1?
+M<&]I;G1E<CI'-#<]*C$ =E]S:6=N961?:6YT7W!O:6YT97(Z1S0W '9?=6YS
+M:6=N961?:6YT7W!O:6YT97(Z1S0X/2HT '9?;&]N9U]P;VEN=&5R.D<T.3TJ
+M,P!V7W-I9VYE9%]L;VYG7W!O:6YT97(Z1S0Y '9?=6YS:6=N961?;&]N9U]P
+M;VEN=&5R.D<U,#TJ-0!V7V9L;V%T7W!O:6YT97(Z1S4Q/2HQ,@!V7V1O=6)L
+M95]P;VEN=&5R.D<U,CTJ,3, =E]S=')U8W0Q.D<Q-@!V7W-T<G5C=#(Z1S4S
+M/7,R-'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z-BPQ-BPQ
+M-CM< '9?:6YT7VUE;6)E<CHQ+#,R+#,R.W9?;&]N9U]M96UB97(Z,RPV-"PS
+M,CM< '9?9FQO871?;65M8F5R.C$R+#DV+#,R.W9?9&]U8FQE7VUE;6)E<CHQ
+M,RPQ,C@L-C0[.P!V7W5N:6]N.D<Q-P!V7W5N:6]N,CI'-30]=3AV7V-H87)?
+M;65M8F5R.C(L,"PX.W9?<VAO<G1?;65M8F5R.C8L,"PQ-CM< '9?:6YT7VUE
+M;6)E<CHQ+# L,S([=E]L;VYG7VUE;6)E<CHS+# L,S([7 !V7V9L;V%T7VUE
+M;6)E<CHQ,BPP+#,R.W9?9&]U8FQE7VUE;6)E<CHQ,RPP+#8T.SL <U]L:6YK
+M.D<Q.0!U7VQI;FLZ1S(U '!R:6UA<GDZ1S4U/65R960Z,"QG<F5E;CHQ+&)L
+M=64Z,BP[ &YO;G!R:6UA<GDZ1S(V &-L=6YK97(Z1S4V/65C:&5V>3HP+&9O
+M<F0Z,2P[ '-P;W)T<V-A<CI',C< 7U]M86EN+F\ 9V-C,E]C;VUP:6QE9"X 
+M+W-E;F1A:2]A8F,O<FEC:"]L871E<W0O;V)J9&ER+7-U;C,O9V-C+P N+B\N
+M+B]D979O+V=C8R]L:6)G8V,R+F, :6YT.G0Q/7(Q.RTR,30W-#@S-C0X.S(Q
+M-#<T.#,V-#<[ &-H87(Z=#(]<C([,#LQ,C<[ &QO;F<@:6YT.G0S/7(Q.RTR
+M,30W-#@S-C0X.S(Q-#<T.#,V-#<[ '5N<VEG;F5D(&EN=#IT-#UR,3LP.RTQ
+M.P!L;VYG('5N<VEG;F5D(&EN=#IT-3UR,3LP.RTQ.P!S:&]R="!I;G0Z=#8]
+M<C$[+3,R-S8X.S,R-S8W.P!L;VYG(&QO;F<@:6YT.G0W/7(Q.S [+3$[ '-H
+M;W)T('5N<VEG;F5D(&EN=#IT.#UR,3LP.S8U-3,U.P!L;VYG(&QO;F<@=6YS
+M:6=N960@:6YT.G0Y/7(Q.S [+3$[ '-I9VYE9"!C:&%R.G0Q,#UR,3LM,3(X
+M.S$R-SL =6YS:6=N960@8VAA<CIT,3$]<C$[,#LR-34[ &9L;V%T.G0Q,CUR
+M,3LT.S [ &1O=6)L93IT,3,]<C$[.#LP.P!L;VYG(&1O=6)L93IT,30]<C$[
+M.#LP.P!V;VED.G0Q-3TQ-0!R96=?8VQA<W,Z5#$V/65.3U]214=3.C L3$]?
+M1E!!7U)%1U,Z,2Q&4$%?4D5'4SHR+$907U)%1U,Z,RQ< $907T]27T9005]2
+M14=3.C0L1$%405]214=3.C4L1$%405]/4E]&4$%?4D5'4SHV+$1!5$%?3U)?
+M1E!?4D5'4SHW+%P 1$%405]/4E]&4%]/4E]&4$%?4D5'4SHX+$%$1%)?4D5'
+M4SHY+$=%3D5204Q?4D5'4SHQ,"Q'14Y%4D%,7T]27T9005]214=3.C$Q+%P 
+M1T5.15)!3%]/4E]&4%]214=3.C$R+$%,3%]214=3.C$S+$Q)35]214=?0TQ!
+M4U-%4SHQ-"P[ '!T<F1I9F9?=#IT,0!S:7IE7W0Z=#$ =V-H87)?=#IT. !L
+M;VYG;&]N9SI4,3<]<SAH:6=H.C,L,"PS,CML;W<Z,RPS,BPS,CL[ &QO;F=?
+M;&]N9SIT,3@]=3AS.C$W+# L-C0[;&PZ-RPP+#8T.SL 9G5N8U]P='(Z=#$Y
+M/2HR,#UF,34 7U]D;U]G;&]B86Q?9'1O<G,Z1C$U %]E>&ET7V1U;6UY7W)E
+M9CI',C$]*C$ 7U]D;U]G;&]B86Q?8W1O<G,Z1C$U %]I;FET:6%L:7IE9"XP
+M %]?;6%I;CI&,34 7V5X:70N;P!G8V,R7V-O;7!I;&5D+@ O<V5N9&%I+V%B
+M8R]R:6-H+VQA=&5S="]O8FID:7(M<W5N,R]G8V,O "XN+RXN+V1E=F\O9V-C
+M+VQI8F=C8S(N8P!I;G0Z=#$]<C$[+3(Q-#<T.#,V-#@[,C$T-S0X,S8T-SL 
+M8VAA<CIT,CUR,CLP.S$R-SL ;&]N9R!I;G0Z=#,]<C$[+3(Q-#<T.#,V-#@[
+M,C$T-S0X,S8T-SL =6YS:6=N960@:6YT.G0T/7(Q.S [+3$[ &QO;F<@=6YS
+M:6=N960@:6YT.G0U/7(Q.S [+3$[ '-H;W)T(&EN=#IT-CUR,3LM,S(W-C@[
+M,S(W-C<[ &QO;F<@;&]N9R!I;G0Z=#<]<C$[,#LM,3L <VAO<G0@=6YS:6=N
+M960@:6YT.G0X/7(Q.S [-C4U,S4[ &QO;F<@;&]N9R!U;G-I9VYE9"!I;G0Z
+M=#D]<C$[,#LM,3L <VEG;F5D(&-H87(Z=#$P/7(Q.RTQ,C@[,3(W.P!U;G-I
+M9VYE9"!C:&%R.G0Q,3UR,3LP.S(U-3L 9FQO870Z=#$R/7(Q.S0[,#L 9&]U
+M8FQE.G0Q,SUR,3LX.S [ &QO;F<@9&]U8FQE.G0Q-#UR,3LX.S [ '9O:60Z
+M=#$U/3$U ')E9U]C;&%S<SI4,38]94Y/7U)%1U,Z,"Q,3U]&4$%?4D5'4SHQ
+M+$9005]214=3.C(L1E!?4D5'4SHS+%P 1E!?3U)?1E!!7U)%1U,Z-"Q$051!
+M7U)%1U,Z-2Q$051!7T]27T9005]214=3.C8L1$%405]/4E]&4%]214=3.C<L
+M7 !$051!7T]27T907T]27T9005]214=3.C@L041$4E]214=3.CDL1T5.15)!
+M3%]214=3.C$P+$=%3D5204Q?3U)?1E!!7U)%1U,Z,3$L7 !'14Y%4D%,7T]2
+M7T907U)%1U,Z,3(L04Q,7U)%1U,Z,3,L3$E-7U)%1U]#3$%34T53.C$T+#L 
+M<'1R9&EF9E]T.G0Q '-I>F5?=#IT,0!W8VAA<E]T.G0X &QO;F=L;VYG.E0Q
+M-SUS.&AI9V@Z,RPP+#,R.VQO=SHS+#,R+#,R.SL ;&]N9U]L;VYG.G0Q.#UU
+M.',Z,3<L,"PV-#ML;#HW+# L-C0[.P!F=6YC7W!T<CIT,3D]*C(P/68Q-0!?
+M97AI=%]D=6UM>5]D96-L.D<Q %]?0U1/4E],25-47U\Z1S(Q/6%R,3LP.S$[
+M,3D 7U]$5$]27TQ)4U1?7SI',C$ +6QG &QI8F<N<P!-<W=I=&-H+F\ 97AI
+M="YO &]N7V5X:70N;P!W<FET92YO &5R<@!?97AI="YO &-E<G)O<BYO &5R
+M<FYO+F\ 9FQS8G5F+F\ 9FQO871?<W=I=&-H+F\ 36EN:70N;P!F<%]G;&]B
+M86QS+F\ ;6EN:71F<"YO &UA;&QO8RYO &ES871T>2YO &9I;F1I;W N;P!I
+M;V(N;P!S:6=V96,N;P!C;&]S92YO &5R<@!F<W1A="YO &5R<@!G971D=&%B
+M;&5S:7IE+F\ 97)R &=E='!A9V5S:7IE+F\ 97)R &EO8W1L+F\ 97)R '-I
+M9V)L;V-K+F\ 97)R '-I9W-E=&UA<VLN;P!E<G( <V)R:RYO '-I9W1R86UP
+M+F\ 7W-I9W9E8RYO &9P<FEN=&8N;P!-9&5F875L="YO &UA.3-N+F\ 9G!?
+M<V%V92YO &)C;W!Y+F\ 8V%L;&]C+F\ 9&]P<FYT+F\ 9G!?8V]M;6]N<RYO
+M &)Z97)O+F\ ;65M<V5T+F\ <W1R;&5N+F\ 871O:2YO &-T>7!E7RYO &UE
+M;6-H<BYO '-E=&QO8V%L92YO '-T<F-H<BYO '-T<F-M<"YO '-T<G-P;BYO
+M '-T<G1O:RYO &5C;VYV97)T+F\ 9V-O;G9E<G0N;P!D;W5B;&5?9&5C:6TN
+M;P!?=6YP86-K7V1B;&4N;P!?8F%S95]3+F\ 7V)A<V5?:6PN;P!?<W!R:6YT
+M9E]S=7 N;P!?=&EM97-?<&]W97(N;P!Q96-O;G9E<G0N;P!R96%D+F\ 97)R
+M '!R:6YT9BYO '-P<FEN=&8N;P!O<&5N+F\ 97)R &UE;6-P>2YO '-T<F-A
+M="YO '-T<F-P>2YO &%B;W)T+F\ 9V5T96YV+F\ <&5R<F]R+F\ <W1R<&)R
+M:RYO %]B:6=?<&]W97(N;P!?<VUA;&Q?<&]W97(N;P!G971P:60N;P!E<G( 
+M<VEG;F%L+F\ :VEL;"YO &5R<@!?<&5R<F]R+F\ 97)R;'-T+F\ =W)I=&5V
+M+F\ 97)R "UL9P!L:6)G+G, 7V5X:70 7U]$64Y!34E# '-T87)T %]M86EN
+M '-T87)T7V9L;V%T %]?97AI= !?96YV:7)O;@!-<W=I=&-H &8V.#@X,5]U
+M<V5D %]V7V-H87)?9G5N8P!?=E]S:6=N961?8VAA<E]F=6YC %]V7W5N<VEG
+M;F5D7V-H87)?9G5N8P!?=E]S:&]R=%]F=6YC %]V7W-I9VYE9%]S:&]R=%]F
+M=6YC %]V7W5N<VEG;F5D7W-H;W)T7V9U;F, 7W9?:6YT7V9U;F, 7W9?<VEG
+M;F5D7VEN=%]F=6YC %]V7W5N<VEG;F5D7VEN=%]F=6YC %]V7VQO;F=?9G5N
+M8P!?=E]S:6=N961?;&]N9U]F=6YC %]V7W5N<VEG;F5D7VQO;F=?9G5N8P!?
+M=E]F;&]A=%]F=6YC %]V7V1O=6)L95]F=6YC %]?7VUA:6X 7W9?8VAA<@!?
+M=E]S:6=N961?8VAA<@!?=E]U;G-I9VYE9%]C:&%R %]V7W-H;W)T %]V7W-I
+M9VYE9%]S:&]R= !?=E]U;G-I9VYE9%]S:&]R= !?=E]I;G0 7W9?<VEG;F5D
+M7VEN= !?=E]U;G-I9VYE9%]I;G0 7W9?;&]N9P!?=E]S:6=N961?;&]N9P!?
+M=E]U;G-I9VYE9%]L;VYG %]V7V9L;V%T %]V7V1O=6)L90!?=E]C:&%R7V%R
+M<F%Y %]V7W-I9VYE9%]C:&%R7V%R<F%Y %]V7W5N<VEG;F5D7V-H87)?87)R
+M87D 7W9?<VAO<G1?87)R87D 7W9?<VEG;F5D7W-H;W)T7V%R<F%Y %]V7W5N
+M<VEG;F5D7W-H;W)T7V%R<F%Y %]V7VEN=%]A<G)A>0!?=E]S:6=N961?:6YT
+M7V%R<F%Y %]V7W5N<VEG;F5D7VEN=%]A<G)A>0!?=E]L;VYG7V%R<F%Y %]V
+M7W-I9VYE9%]L;VYG7V%R<F%Y %]V7W5N<VEG;F5D7VQO;F=?87)R87D 7W9?
+M9FQO871?87)R87D 7W9?9&]U8FQE7V%R<F%Y %]V7V-H87)?<&]I;G1E<@!?
+M=E]S:6=N961?8VAA<E]P;VEN=&5R %]V7W5N<VEG;F5D7V-H87)?<&]I;G1E
+M<@!?=E]S:&]R=%]P;VEN=&5R %]V7W-I9VYE9%]S:&]R=%]P;VEN=&5R %]V
+M7W5N<VEG;F5D7W-H;W)T7W!O:6YT97( 7W9?:6YT7W!O:6YT97( 7W9?<VEG
+M;F5D7VEN=%]P;VEN=&5R %]V7W5N<VEG;F5D7VEN=%]P;VEN=&5R %]V7VQO
+M;F=?<&]I;G1E<@!?=E]S:6=N961?;&]N9U]P;VEN=&5R %]V7W5N<VEG;F5D
+M7VQO;F=?<&]I;G1E<@!?=E]F;&]A=%]P;VEN=&5R %]V7V1O=6)L95]P;VEN
+M=&5R %]P<FEM87)Y %]N;VYP<FEM87)Y %]S<&]R='-C87( 7V-L=6YK97( 
+M7W-?;&EN:P!?=5]L:6YK %]V7W5N:6]N %]V7W5N:6]N,@!?=E]S=')U8W0Q
+M %]V7W-T<G5C=#( 7U]?9&]?9VQO8F%L7V1T;W)S %]?7T143U)?3$E35%]?
+M %]?97AI=%]D=6UM>5]R968 7U]E>&ET7V1U;6UY7V1E8VP 7U]?9&]?9VQO
+M8F%L7V-T;W)S %]?7T-43U)?3$E35%]? %]O;E]E>&ET %]W<FET90!?;7-W
+M:71C:&9P7P!-:6YI= !F;&]A=%]S=VET8V@ 7U]C;&5A;G5P %]?97AI=%]H
+M86YD;&5R<P!?;6%L;&]C &-E<G)O<@!?97)R;F\ 7U]W<G1C:&L 7U]F;'-B
+M=68 7V9R964 7U]S;6)U9@!?9F9L=7-H %]?9FEN9&)U9@!?7WAF;'-B=68 
+M7V9S=&%T %]?8G5F<WEN8P!?8VQO<V4 7VES871T>0!?9F-L;W-E %]?9G=A
+M;&L 5FQI<W0 7V9P7W-W:71C: !?;6EN:71F<%\ 7V9P7W-T871E7VUC-C@X
+M.#$ 7T9M;V1E %]&<W1A='5S %]F<%]S=&%T95]S=6YF<&$ 7V9P7W-T871E
+M7W-K>69F< !?9G!?<W1A=&5?<V]F='=A<F4 7W-I9W9E8P!?14U44W!E8VEA
+M; !?9G!R:6YT9@!?;6$Y,VY? %]-9&5F875L= !?14U44VEG;F%L;&5D %]?
+M:6]B %]R96%L;&]C %]S8G)K %]G971P86=E<VEZ90!?8F-O<'D 7U]U8F]U
+M;F0 7U]?;6%L;&EN9F\ 7U]R;V]T %]?;&)O=6YD %]I;V-T; !?7V9I;F1I
+M;W  7V=E=&1T86)L97-I>F4 7U]F7VUO<F5F:6QE<P!?9E]P<F5A;&QO8P!?
+M8V%L;&]C %]?<VEG9G5N8P!?<VEG<V5T;6%S:P!?7W-I9W1R86UP %]?<VEG
+M=F5C %]S:6=B;&]C:P!?96YD &-U<F)R:P!F<%]S879E &9P7W)E<W1O<F4 
+M7U]D;W!R;G0 7U]S:WE?9F0 7U]S:WEB87-E %]B>F5R;P!?8V9R964 7V%T
+M;VD 7W-T<G-P;@!?7V-T>7!E7P!?;65M8VAR %]M96US970 7W%F8V]N=F5R
+M= !?9F-O;G9E<G0 7W-T<F-H<@!?;&]C86QE8V]N=@!?7VUK87)G;'-T %]S
+M=')L96X 7U]F;W5R9&EG:71S<75I8VL 7W%G8V]N=F5R= !?9V-O;G9E<G0 
+M7W%E8V]N=F5R= !?96-O;G9E<G0 7U]G971A<F< 7U]F<&%B87-E %]I<W!U
+M;F-T %]I<V=R87!H %]I<V%S8VEI %]T;V%S8VEI %]?;6)?8W5R7VUA> !?
+M:7-X9&EG:70 7VES<W!A8V4 7VES86QN=6T 7VES=7!P97( 7VES8VYT<FP 
+M7VES<')I;G0 7VES86QP:&$ 7VES9&EG:70 7VES;&]W97( 7W)E860 7VQC
+M;VYV %]G971L;V-A;&5?8W1Y<&4 7U]L86YG:6YF;P!?;&]C86QD=&-O;G8 
+M7W-T<F-A= !?7VUY7W1I;64 7W-E=&QO8V%L90!?<W1R=&]K %]I;FET7W-T
+M871I8W, 7V=E=&QO8V%L95]N=6UE<FEC %]M96UC<'D 7U]L;V-A;&5S %]S
+M=')C;7  7V]P96X 7V]P96YL;V-A;&4 7W-T<F-P>0!?7V-O9&5?<V5T7VEN
+M9F\ 7U]C='EP95]U; !?9V5T96YV %]?9'1C;VYV %]S=')P8G)K %]F<%]D
+M:7)E8W1I;VX 7U]F<%]C=7)R96YT7V1I<F5C=&EO;@!?7V9P7V-U<G)E;G1?
+M97AC97!T:6]N<P!?7V9P7V-U<G)E;G1?<')E8VES:6]N %]D;W5B;&5?=&]?
+M9&5C:6UA; !?9V-V= !?7V=C=G0 7V)I;F%R>5]T;U]D96-I;6%L7VEN=&5G
+M97( 7U]R:6=H=%]S:&EF=%]B87-E7W1W;P!?9&5C:6UA;%]R;W5N9 !?7V)I
+M9U]F;&]A=%]T:6UE<U]P;W=E<@!?8FEN87)Y7W1O7V1E8VEM86Q?9G)A8W1I
+M;VX 7U]F<%]N;W)M86QI>F4 7W-P<FEN=&8 7U]F<F5E7V)I9U]F;&]A= !?
+M7W5N<&%C:V5D7W1O7V)I9U]F;&]A= !?7V)A<V5?8V]N=F5R<VEO;E]A8F]R
+M= !?7W5N<&%C:U]D;W5B;&4 7U]C;&%S<U]D;W5B;&4 7W%U861R=7!L95]T
+M;U]D96-I;6%L %]?=6YP86-K961?=&]?9&5C:6UA; !?7V)I9U]B:6YA<GE?
+M=&]?8FEG7V1E8VEM86P 7U]U;G!A8VM?<75A9')U<&QE %]?8VQA<W-?<75A
+M9')U<&QE %]?9G!?;&5F='-H:69T %]?9G!?<V5T7V5X8V5P=&EO;@!?7W5M
+M86, 7U]M=6QT:7!L>5]B87-E7W1W;U]V96-T;W( 7U]M=6QT:7!L>5]B87-E
+M7W1E;E]V96-T;W( 7U]C87)R>5]P<F]P86=A=&5?='=O %]?8V%R<GE?<')O
+M<&%G871E7W1E;@!?7V-A<G)Y7VEN7V(Q,# P, !?7W!R;V1C7V(Q,# P, !?
+M7VUU;'1I<&QY7V)A<V5?='=O %]?;&5F=%]S:&EF=%]B87-E7W1W;P!?7VUU
+M;'1I<&QY7V)A<V5?=&5N7V)Y7W1W;P!?7VUU;'1I<&QY7V)A<V5?=&5N %]?
+M;&5F=%]S:&EF=%]B87-E7W1E;@!?7W!R;V1?,3 P,#!?8C8U-3,V %]?<')O
+M9%]B-C4U,S8 7U]C87)R>5]O=71?8C$P,# P %]?<')O9%\V-34S-E]B,3 P
+M,#  7U]L<VAI9G1?8C$P,# P %]?<')O9%]B,3 P,#  7U]M=6Q?-C4U,S9S
+M:&]R= !?<')I;G1F %]?;&5A9&EN9U]Z97)O<U]B:6=?<&]W97)S7W1E;@!?
+M7VQE861I;F=?>F5R;W-?<VUA;&Q?<&]W97)S7W1E;@!?7VQE861I;F=?>F5R
+M;W-?=&EN>5]P;W=E<G-?=&5N %]?<W1A<G1?8FEG7W!O=V5R<U]T96X 7U]S
+M=&%R=%]S;6%L;%]P;W=E<G-?=&5N %]?<W1A<G1?=&EN>5]P;W=E<G-?=&5N
+M %]?8FEG7W!O=V5R<U]T96X 7U]S;6%L;%]P;W=E<G-?=&5N %]?=&EN>5]P
+M;W=E<G-?=&5N %]?;6%X7V)I9U]P;W=E<G-?=&5N %]?;6%X7W-M86QL7W!O
+M=V5R<U]T96X 7U]M87A?=&EN>5]P;W=E<G-?=&5N %]?8V]P>5]B:6=?9FQO
+M871?9&EG:71S %]A8F]R= !?7W-T87)T7V)I9U]P;W=E<G-?='=O %]?<W1A
+M<G1?<VUA;&Q?<&]W97)S7W1W;P!?7W-T87)T7W1I;GE?<&]W97)S7W1W;P!?
+M7V)I9U]P;W=E<G-?='=O %]?<VUA;&Q?<&]W97)S7W1W;P!?7W1I;GE?<&]W
+M97)S7W1W;P!?7VUA>%]B:6=?<&]W97)S7W1W;P!?7VUA>%]S;6%L;%]P;W=E
+M<G-?='=O %]?;6%X7W1I;GE?<&]W97)S7W1W;P!?<&5R<F]R %]K:6QL %]S
+M:6=N86P 7V=E='!I9 !?7W!E<G)O<@!?<WES7V5R<FQI<W0 7W=R:71E=@!?
+=<WES7VYE<G( 7V5T97AT %]E9&%T80!?7V5N9 !R
+ 
+end
diff --git a/gdb/testsuite/gdb.base/m68k-elf.u b/gdb/testsuite/gdb.base/m68k-elf.u
new file mode 100644
index 0000000..e3d05e7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/m68k-elf.u
@@ -0,0 +1,298 @@
+begin 777 m68k-elf
+M?T5,1@$" 0             "  0    !@  $>    #0  #"0       T "  
+M!0 H !4 $0    8    T@   -         "@    H     4          P  
+M -0              !,         !          !    -(   #0        )
+MC   "8P    %   @      $   G @  IP         "4   "6     <  "  
+M     @  ">2  "GD         '          !P     O=7-R+VQI8B]L:6)C
+M+G-O+C$      &$    ,                                        
+M  4          P              !P               0              
+M           +                    !                @          
+M                                                            
+M                                        "@                  
+M       (                                               )    
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M!@                         !         "02        "H  +!@     
+M$0#_\0    ^  "G$    !!$   H    8@  )P      1 /_Q    'P      
+M  !:$@       ":  "I4     !$ __$    M           2        ,H  
+M!-@    $$0  "    #\          !(       !)@  IR      1 /_Q    
+M7X  *>0     $0#_\0!?8VQE86YU< !?96YD %]E;G9I<F]N %]E=&5X= !A
+M=&5X:70 7V5D871A &5X:70 7VQI8E]V97)S:6]N %]?9G!S=&%R= !?1TQ/
+M0D%,7T]&1E-%5%]404),15\ 7T193D%-24, +W5S<B]L:6(O;&EB8RYS;RXQ
+M  "  "G4   %%0    "  "G8   !%0    "  "G<   )%0    "  "G@   '
+M%0    !.=4YQ+SL!<   );9.^P%Q   EL@    !.^P%Q   EJB\\     &#_
+M____W$[[ 7$  "6:+SP    ,8/_____(3OL!<0  )8HO/    !A@_____[1.
+M^P%Q   E>B\\    )&#_____H"\\@  )O$ZY@  $*%A/(#R   0\9_\    .
+M+P!.N8  !"A83Y_\    #"Z60>X !"](  1*F&;\(\B  "G$+T@ "$ZY@  $
+M$$ZY@  $4$ZY@  'K"Z 3KF   1D3G5.<0    !(#O____Q([P    3R-_  
+M 7     $< !@_P    3R-]   7     $3.\    $3EY.=4@._____$CO    
+M!/(W\  !<     1P &#_    !/(WT  !<     1,[P    1.7DYU2 [____\
+M2.\    $\C?P  %P    !'  8/\    $\C?0  %P    !$SO    !$Y>3G5(
+M#O____Q([P    3R-_   7     $< !@_P    3R-]   7     $3.\    $
+M3EY.=4@._____$CO    !/(W\  !<     1P &#_    !/(WT  !<     1,
+M[P    1.7DYU2 [____\2.\    $\C?P  %P    !'  8/\    $\C?0  %P
+M    !$SO    !$Y>3G5(#O____Q([P    3R-_   7     $< !@_P    3R
+M-]   7     $3.\    $3EY.=4@._____$CO    !/(W\  !<     1P &#_
+M    !/(WT  !<     1,[P    1.7DYU2 [____\2.\    $\C?P  %P    
+M!'  8/\    $\C?0  %P    !$SO    !$Y>3G5(#O____Q([P    3R-_  
+M 7     $< !@_P    3R-]   7     $3.\    $3EY.=4@._____$CO    
+M!/(W\  !<     1P &#_    !/(WT  !<     1,[P    1.7DYU2 [____\
+M2.\    $\C?P  %P    !'  8/\    $\C?0  %P    !$SO    !$Y>3G5(
+M#O____Q([P    3R-_   7     $\CQ4            8/\    $\C?0  %P
+M    !$SO    !$Y>3G5(#O____Q([P    3R-_   7     $\CQ4        
+M    8/\    $\C?0  %P    !$SO    !$Y>3G5(#O____Q([P    3R-_  
+M 7     $0CF  "MD$_P  8  *N 3_  "@  JI#/\  .  "K8,_P !(  *L@S
+M_  %@  J;"/\    !H  *G@C_     >  "I8(_P    (@  J7"/\    "8  
+M*M0C_     J  "ID(_P    +@  JY"/\0L@  (  *J@C_$!I  "  "IP(_P 
+M    @  J=!/Y@  K9(  *T 3^8  *N"  "J@$_F  "JD@  J8#/Y@  JV(  
+M*N@S^8  *LB  "JT,_F  "IL@  J["/Y@  J>(  *H0C^8  *EB  "KX(_F 
+M "I<@  JO"/Y@  JU(  *UPC^8  *F2  "JL(_F  "KD@  JS"/Y@  JJ(  
+M*TPC^8  *G"  "J0(_F  "IT@  JE"/\@  K9(  *O C_(  *N"  "M8(_R 
+M "JD@  J]"/\@  JV(  *U0C_(  *LB  "L((_R  "IL@  J:"/\@  J>(  
+M*K@C_(  *EB  "L (_R  "I<@  JQ"/\@  JU(  *MPC_(  *F2  "M((_R 
+M "KD@  J@"/\@  JJ(  *T0C_(  *G"  "L,(_P    "@  JC"/\     H  
+M*GPC_     &  "P (_P    !@  K:"/Y@  K!(  *W S^8  +!"  "P(\C?0
+M  %P    !$SO    !$Y>3G5.=4YQ          "  "GD          "   0P
+M@  $1(  !%B   1L     0   &@    ,@  $$     V   F\    !(   .@ 
+M   %@  #9     :   *D    "@   'L    +    $    !4          X  
+M*<@    "    ,    !0    '    %X   ^                          
+M                 0          ! #_\0    "   #4      ,   $     
+M@   Z      #   "     (   J0      P   P    "   -D      ,   0 
+M    @  #X      #   %     (  !!       P  !@    "   04      , 
+M  <     @  $>      #   (     (  ";P      P  "0    "  "G     
+M  ,   H     @  IR      #   +     (  *>0      P  #     "  "I8
+M      ,   T                #   .                 P  #P      
+M          ,  !                 #   1                 P  $@  
+M              ,  !,                #   4    "@          ! #_
+M\0   !$           0 __$    8           $ /_Q    )           
+M! #_\0   "P           0 __$    V           $ /_Q    /8  !-P 
+M   R$@  "    $F  "I8    !!$   T   !6@  J7     01   -    98  
+M";P     $@  "0   &N  "I@     A$   T   "!@  'K    A 2   (    
+MAH  *F0    $$0  #0   )2  "IH    !!$   T   "M@  $/    "02    
+M    MH  +!@     $0#_\0   +N  "IL     A$   T   #,@  %U@   #(2
+M   (    XH  *G     ($0  #0   .N  "IX    !!$   T   #Q@  $>   
+M   2   (    ^(  *GP    $$0  #0   0.  "G$    !!$   H   $,@  J
+M@     01   -   !)(  *H0    ($0  #0   3"  "J,    !!$   T   $X
+M@  %#@   #(2   (   !2X  *I     0$0  #0   5J   G      !$ __$ 
+M  %A@  JH     (1   -   !=8  *J0    !$0  #0   86  "JH    !!$ 
+M  T   &-@  JK     @1   -   !H8  !"@   !:$@       :B  "G$    
+M!"$   H   &P@  &G@   #(2   (   !O(  !P(    R$@  "    =&  "JT
+M    !!$   T   'F@  JN     01   -   !](  *E0     $0#_\0   ?N 
+M  5R    ,A(   @   ((@  JO     @1   -   "'8  *L0    $$0  #0  
+M C2   8(    ,A(   @   (_@  JR     (1   -   "3H  !S0    \$@  
+M"    EN   1D     !(       )@@  JS     @1   -   "=H  *M0    $
+M$0  #0   GV  "K8     A$   T   *%@  JW     01   -   "E(  *N  
+M   !$0  #0   J*  "KD    !!$   T   *R@  JZ     01   -   "P(  
+M*NP    $$0  #0   M>   38    !!$   @   +D@  $U      2   (   "
+M[(  *O     $$0  #0   ON  "KT    !!$   T   ,3@  J^     @1   -
+M   #)H  !%      $@       S"  "L     !!$   T   -%@  K!     01
+M   -   #3(  *<@     $0#_\0   V*  "L(    !!$   T   -Y@  K#   
+M  01   -   #BH  *<     $$0  "@   YR  "L0    &!$   T   .F@  K
+M*    !@1   -   #L(  *T     "$0  #0   [V  "M$    !!$   T   /-
+M@  K2     01   -   #XX  !W     \$@  "    _&   8Z    ,A(   @ 
+M  0#@  IY      1 /_Q   $#(  *TP    ($0  #0  !!J  "M4    !!$ 
+M  T   0J@  &T    #(2   (   $/8  *U@    $$0  #0  !%.  "M<    
+M"!$   T   1@@  $$      2   &   $9H  *V0    !$0  #0  !&V  "MH
+M    !!$   T   1U@  %0    #(2   (   $BH  *W    "0$0  #0  !)& 
+M  6D    ,A(   @   2E@  L      01   -   $KX  + @    ($0  #0  
+M!+B   9L    ,A(   @   3,@  L$     @1   - &TV.&LN96QF &-R=#$N
+M<P!C<G1I+G, =F%L=65S+5AT+F, 9V1B;64N8P!S:%]D871A+F, 8W)T;BYS
+M '9?8VAA<E]F=6YC '9?<VEG;F5D7VEN= !V7W5N<VEG;F5D7VEN= !?9FEN
+M:0!V7W5N<VEG;F5D7V-H87)?87)R87D ;6%I;@!V7W-I9VYE9%]L;VYG '9?
+M=6YS:6=N961?<VAO<G1?<&]I;G1E<@!?8VQE86YU< !?96YD '9?=6YS:6=N
+M961?<VAO<G0 =E]U;G-I9VYE9%]S:&]R=%]F=6YC '9?9&]U8FQE '9?:6YT
+M %]S=&%R= !N;VYP<FEM87)Y %]E;G9I<F]N '9?=6YS:6=N961?;&]N9U]P
+M;VEN=&5R '9?:6YT7V%R<F%Y '!R:6UA<GD =E]S:6=N961?8VAA<E]F=6YC
+M '9?9&]U8FQE7V%R<F%Y %]E=&5X= !V7W-I9VYE9%]C:&%R7V%R<F%Y '9?
+M=6YS:6=N961?8VAA<@!V7V9L;V%T '9?<VEG;F5D7VQO;F=?87)R87D 871E
+M>&ET &5N=FER;VX =E]L;VYG7V9U;F, =E]U;G-I9VYE9%]L;VYG7V9U;F, 
+M=E]S:6=N961?<VAO<G1?87)R87D =E]I;G1?<&]I;G1E<@!?961A=&$ =E]S
+M:&]R=%]F=6YC '9?=6YS:6=N961?:6YT7V%R<F%Y '9?=6YS:6=N961?:6YT
+M7W!O:6YT97( =E]I;G1?9G5N8P!V7W-I9VYE9%]S:&]R= !V7V9L;V%T7V9U
+M;F, 97AI= !V7W5N<VEG;F5D7VQO;F=?87)R87D =E]L;VYG '9?<VAO<G0 
+M=E]L;VYG7W!O:6YT97( =E]S:6=N961?8VAA<@!V7W5N<VEG;F5D7VQO;F< 
+M=E]S:&]R=%]A<G)A>0!V7W5N<VEG;F5D7W-H;W)T7V%R<F%Y %]L:6)?=F5R
+M<VEO;@!?;6-O=6YT '9?8VAA<E]P;VEN=&5R '9?=6YS:6=N961?8VAA<E]P
+M;VEN=&5R '9?<VEG;F5D7VEN=%]A<G)A>0!?7V9P<W1A<G0 =E]S:6=N961?
+M:6YT7W!O:6YT97( <U]L:6YK %]'3$]"04Q?3T9&4T547U1!0DQ%7P!V7W-I
+M9VYE9%]S:&]R=%]P;VEN=&5R '9?9&]U8FQE7W!O:6YT97( 7U]L;VYG9&]U
+M8FQE7W5S960 =E]S=')U8W0Q '9?<W1R=6-T,@!V7V-H87)?87)R87D =E]F
+M;&]A=%]P;VEN=&5R '9?<VEG;F5D7VQO;F=?<&]I;G1E<@!V7V1O=6)L95]F
+M=6YC '9?<VEG;F5D7VEN=%]F=6YC %]$64Y!34E# '9?9FQO871?87)R87D 
+M=E]S:&]R=%]P;VEN=&5R '9?<VEG;F5D7VQO;F=?9G5N8P!V7W-I9VYE9%]C
+M:&%R7W!O:6YT97( =E]L;VYG7V%R<F%Y %]I;FET '9?8VAA<@!C;'5N:V5R
+M '9?=6YS:6=N961?8VAA<E]F=6YC '5?;&EN:P!V7W-I9VYE9%]S:&]R=%]F
+M=6YC '-P;W)T<V-A<@!V7W5N:6]N,@!V7W5N<VEG;F5D7VEN=%]F=6YC '9?
+M=6YI;VX  "YI;G1E<G  +FAA<V@ +F1Y;G-Y;0 N9'EN<W1R "YR96QA+G!L
+M=  N:6YI=  N<&QT "YT97AT "YF:6YI "YD871A "YG;W0 +F1Y;F%M:6, 
+M+F)S<P N<WEM=&%B "YS=')T86( +G!E<V5L "YS:'-T<G1A8@ N8V]M;65N
+M=  N9&5B=6< +FQI;F4 0"@C*6QI8F,M;3,R.FTT+F1E9@DQ+C0 0"@C*6QI
+M8F,M;3,R.F-S=2]C<G0Q+G,),2XQ.     ! *",I;&EB8RUM,S(Z;30N9&5F
+M"3$N- ! *",I;&EB8RUM,S(Z8W-U+V-R=&DN<PDQ+C, 87,Z("A#1%,I(#4N
+M," Q+S(O.3      0"@C*6QI8F,M;3,R.FTT+F1E9@DQ+C0 0"@C*6QI8F,M
+M;3,R.F-S=2]C<G1N+G,),2XV "!L9" Z("A#1%,I(#4N," Q+S(O.3      
+M "X $0 2   6<  X9V1B;64N8P !-@    $!$8  !-P!(8  ";P!!@      
+M   = !, $@   4X .'1?<W1R=6-T  "V    &    "H #0 2    =0 X=E]C
+M:&%R7VUE;6)E<@  50 ! ", !@0     !P   "L #0 2    H  X=E]S:&]R
+M=%]M96UB97(  %4 !  C  8$     @<    I  T $@   ,D .'9?:6YT7VUE
+M;6)E<@  50 ' ", !@0    $!P   "H #0 2    \P X=E]L;VYG7VUE;6)E
+M<@  50 * ", !@0    (!P   "L #0 2   !'@ X=E]F;&]A=%]M96UB97( 
+M %4 #@ C  8$    # <    L  T $@   4H .'9?9&]U8FQE7VUE;6)E<@  
+M50 / ", !@0    0!P    0    ; !, $@   FP .'XP9F%K90  M@   !@ 
+M   J  T $@   9, .'9?8VAA<E]M96UB97(  %4  0 C  8$      <    K
+M  T $@   ;X .'9?<VAO<G1?;65M8F5R  !5  0 (P &!     ('    *0 -
+M !(   'G #AV7VEN=%]M96UB97(  %4 !P C  8$    ! <    J  T $@  
+M A$ .'9?;&]N9U]M96UB97(  %4 "@ C  8$    " <    K  T $@   CP 
+M.'9?9FQO871?;65M8F5R  !5  X (P &!     P'    +  - !(   )H #AV
+M7V1O=6)L95]M96UB97(  %4 #P C  8$    $ <    $    '  7 !(   .+
+M #AT7W5N:6]N  "V    "    "H #0 2   "L@ X=E]C:&%R7VUE;6)E<@  
+M50 ! ", !@0     !P   "L #0 2   "W0 X=E]S:&]R=%]M96UB97(  %4 
+M!  C  8$      <    I  T $@   P8 .'9?:6YT7VUE;6)E<@  50 ' ", 
+M!@0     !P   "H #0 2   #,  X=E]L;VYG7VUE;6)E<@  50 * ", !@0 
+M    !P   "L #0 2   #6P X=E]F;&]A=%]M96UB97(  %4 #@ C  8$    
+M  <    L  T $@   X< .'9?9&]U8FQE7VUE;6)E<@  50 / ", !@0     
+M!P    0    ; !< $@  !*D .'XQ9F%K90  M@    @    J  T $@   ]  
+M.'9?8VAA<E]M96UB97(  %4  0 C  8$      <    K  T $@   _L .'9?
+M<VAO<G1?;65M8F5R  !5  0 (P &!      '    *0 - !(   0D #AV7VEN
+M=%]M96UB97(  %4 !P C  8$      <    J  T $@  !$X .'9?;&]N9U]M
+M96UB97(  %4 "@ C  8$      <    K  T $@  !'D .'9?9FQO871?;65M
+M8F5R  !5  X (P &!      '    +  - !(   2E #AV7V1O=6)L95]M96UB
+M97(  %4 #P C  8$      <    $    *@ & !(   37 #AV7V-H87)?9G5N
+M8P  50 ! 1&   3< 2&   4.    !    #$ !@ 2   %#  X=E]S:6=N961?
+M8VAA<E]F=6YC  !5  (!$8  !0X!(8  !4     $    ,P & !(   5# #AV
+M7W5N<VEG;F5D7V-H87)?9G5N8P  50 # 1&   5  2&   5R    !    "L 
+M!@ 2   %<@ X=E]S:&]R=%]F=6YC  !5  0!$8  !7(!(8  !:0    $    
+M,@ & !(   6H #AV7W-I9VYE9%]S:&]R=%]F=6YC  !5  4!$8  !:0!(8  
+M!=8    $    -  & !(   7@ #AV7W5N<VEG;F5D7W-H;W)T7V9U;F,  %4 
+M!@$1@  %U@$A@  &"     0    I  8 $@  !@T .'9?:6YT7V9U;F,  %4 
+M!P$1@  &" $A@  &.@    0    P  8 $@  !D$ .'9?<VEG;F5D7VEN=%]F
+M=6YC  !5  @!$8  !CH!(8  !FP    $    ,@ & !(   9W #AV7W5N<VEG
+M;F5D7VEN=%]F=6YC  !5  D!$8  !FP!(8  !IX    $    *@ & !(   :E
+M #AV7VQO;F=?9G5N8P  50 * 1&   :> 2&   ;0    !    #$ !@ 2   &
+MV@ X=E]S:6=N961?;&]N9U]F=6YC  !5  L!$8  !M !(8  !P(    $    
+M,P & !(   <1 #AV7W5N<VEG;F5D7VQO;F=?9G5N8P  50 , 1&   <" 2& 
+M  <T    !    "L !@ 2   '0  X=E]F;&]A=%]F=6YC  !5  X!$8  !S0!
+M(8  !W     $    +  & !(   =P #AV7V1O=6)L95]F=6YC  !5  \!$8  
+M!W !(8  !ZP    $    %0 5 !(   >N (, !0$   ?J    %0 % !(   >:
+M (, !0$   ?J    $  % !(   >J %4 !P    0    \  $ $@  !^H E0  
+M *, *   "              (          $   @          @@ <@   "X 
+M   9 !, $@  "'L .&QI;FL  +8   "8    )@ - !(   @I #AN97AT  "#
+M  4!   'Z@ C  8$      <    J  T $@  "%, .&QI;FMF=6YC  "#  4!
+M   '<  C  8$    ! <    D  T $@  "'< .'-T=69F  !R   'K@ C  8$
+M    " <    $    %0 5 !(   BY (, !0$   ?J    %0 % !(   BE (, 
+M!0$   ?J    $  % !(   BU %4 !P    0    \  $ $@  "/4 E0   *, 
+M*   "              (          $   @          @@ <@   "X    <
+M !< $@  "8D .'1U7VQI;FL  +8   "0    )@ - !(   DW #AN97AT  "#
+M  4!   'Z@ C  8$      <    J  T $@  "6$ .&QI;FMF=6YC  "#  4!
+M   (>P C  8$      <    D  T $@  "84 .'-T=69F  !R   (N0 C  8$
+M      <    $    .@ $ !(   G' #A^,F9A:V4  +8    $ /, &P    )B
+M;'5E      %G<F5E;@      <F5D      0    ^  0 $@  "@D .&-O;&]R
+M<P  M@    0 \P ?     G!I;FL      7!U<G!L90      >65L;&]W    
+M  0    R  0 $@  "C\ .'XS9F%K90  M@    0 \P 3     69O<F0     
+M &-H979Y      0    Q  0 $@  "G0 .&-A<G,  +8    $ /, %     %P
+M;W)S8VAE      !B;7<     !    #( !  2   *J@ X?C1F86ME  "V    
+M! #S !,    !5%)510      1D%,4T4     !    !P %@ 2   *Q@ X8F]O
+M;&5A;@  <@  "G0    Q  0 $@  "OL .&)V86QS  "V    ! #S !,    !
+M=')U90      9F%L<V4     !    !T %@ 2   +&  X8F]O;&5A;C(  '( 
+M  K&    1@ $ !(   MB #AM:7-O<F1E<F5D  "V    ! #S ",    #=&AR
+M964      'IE<F\      6]N90     "='=O      0    C  8 $@  "XD 
+M.&UA:6X  %4 !P$1@  'K $A@  )O     0    G  < $@  "[  .'-P;W)T
+M<V-A<@  <@  "C\ (P % X  +      E  < $@  "]4 .&-L=6YK97(  '( 
+M  H) ", !0.  "MH    *  ' !(   O] #AN;VYP<FEM87)Y  !R   )QP C
+M  4#@  J?    "4 !P 2   ,(@ X<')I;6%R>0  <@  "8D (P % X  *HP 
+M   D  < $@  #$8 .'5?;&EN:P  <@  "/4 (P % X  *W     G  < $@  
+M#&T .'-?;&EN:P  @P % 0  !^H (P % X  *P0    F  < $@  #), .'9?
+M=6YI;VXR  !R   #BP C  4#@  L"    "4 !P 2   ,N  X=E]U;FEO;@  
+M<@   FP (P % X  +!     G  < $@  #-\ .'9?<W1R=6-T,@  <@   4X 
+M(P % X  *R@    G  < $@  #08 .'9?<W1R=6-T,0  <@   "X (P % X  
+M*Q     O  < $@  #34 .'9?9&]U8FQE7W!O:6YT97(  &,  P$ #P C  4#
+M@  K#    "X !P 2   -8P X=E]F;&]A=%]P;VEN=&5R  !C  ,!  X (P %
+M X  *T0    V  < $@  #9D .'9?=6YS:6=N961?;&]N9U]P;VEN=&5R  !C
+M  ,!  P (P % X  *H     T  < $@  #<T .'9?<VEG;F5D7VQO;F=?<&]I
+M;G1E<@  8P # 0 + ", !0.  "M(    +0 ' !(   WZ #AV7VQO;F=?<&]I
+M;G1E<@  8P # 0 * ", !0.  "K<    -0 ' !(   XO #AV7W5N<VEG;F5D
+M7VEN=%]P;VEN=&5R  !C  ,!  D (P % X  *L0    S  < $@  #F( .'9?
+M<VEG;F5D7VEN=%]P;VEN=&5R  !C  ,!  @ (P % X  *P     L  < $@  
+M#HX .'9?:6YT7W!O:6YT97(  &,  P$ !P C  4#@  JN    #< !P 2   .
+MQ0 X=E]U;G-I9VYE9%]S:&]R=%]P;VEN=&5R  !C  ,!  8 (P % X  *F@ 
+M   U  < $@  #OH .'9?<VEG;F5D7W-H;W)T7W!O:6YT97(  &,  P$ !0 C
+M  4#@  K"    "X !P 2   /*  X=E]S:&]R=%]P;VEN=&5R  !C  ,!  0 
+M(P % X  *U0    V  < $@  #UX .'9?=6YS:6=N961?8VAA<E]P;VEN=&5R
+M  !C  ,!  , (P % X  *O0    T  < $@  #Y( .'9?<VEG;F5D7V-H87)?
+M<&]I;G1E<@  8P # 0 " ", !0.  "M8    +0 ' !(   ^_ #AV7V-H87)?
+M<&]I;G1E<@  8P # 0 ! ", !0.  "KP    )  ! !(   _C )4   "C !  
+M  @          0@ 50 /    +  ' !(  ! / #AV7V1O=6)L95]A<G)A>0  
+M<@  #[\ (P % X  *I     D  $ $@  $#, E0   *, $   "          !
+M" !5  X    K  < $@  $%X .'9?9FQO871?87)R87D  '(  ! / ", !0. 
+M "M,    )  ! !(  !"" )4   "C !    @          0@ 50 ,    ,P '
+M !(  !"U #AV7W5N<VEG;F5D7VQO;F=?87)R87D  '(  !!> ", !0.  "K,
+M    )  ! !(  !#9 )4   "C !    @          0@ 50 +    ,0 ' !( 
+M !$* #AV7W-I9VYE9%]L;VYG7V%R<F%Y  !R   0M0 C  4#@  JK    "0 
+M 0 2   1+@"5    HP 0   (          $( %4 "@   "H !P 2   16  X
+M=E]L;VYG7V%R<F%Y  !R   1"@ C  4#@  K7    "0  0 2   1? "5    
+MHP 0   (          $( %4 "0   #( !P 2   1K@ X=E]U;G-I9VYE9%]I
+M;G1?87)R87D  '(  !%8 ", !0.  "J\    )  ! !(  !'2 )4   "C !  
+M  @          0@ 50 (    ,  ' !(  !(" #AV7W-I9VYE9%]I;G1?87)R
+M87D  '(  !&N ", !0.  "KX    )  ! !(  !(F )4   "C !    @     
+M     0@ 50 '    *0 ' !(  !)/ #AV7VEN=%]A<G)A>0  <@  $@( (P %
+M X  *H0    D  $ $@  $G, E0   *, $   "          !" !5  8    T
+M  < $@  $J< .'9?=6YS:6=N961?<VAO<G1?87)R87D  '(  !)/ ", !0. 
+M "KL    )  ! !(  !++ )4   "C !    @          0@ 50 %    ,@ '
+M !(  !+] #AV7W-I9VYE9%]S:&]R=%]A<G)A>0  <@  $J< (P % X  *K0 
+M   D  $ $@  $R$ E0   *, $   "          !" !5  0    K  < $@  
+M$TP .'9?<VAO<G1?87)R87D  '(  !+] ", !0.  "KH    )  ! !(  !-P
+M )4   "C !    @          0@ 50 #    ,P ' !(  !.C #AV7W5N<VEG
+M;F5D7V-H87)?87)R87D  '(  !-, ", !0.  "I@    )  ! !(  !/' )4 
+M  "C !    @          0@ 50 "    ,0 ' !(  !/X #AV7W-I9VYE9%]C
+M:&%R7V%R<F%Y  !R   3HP C  4#@  JH    "0  0 2   4' "5    HP 0
+M   (          $( %4  0   "H !P 2   41@ X=E]C:&%R7V%R<F%Y  !R
+M   3^  C  4#@  K0    "0 !P 2   4:@ X=E]D;W5B;&4  %4 #P C  4#
+M@  J<    ", !P 2   4C0 X=E]F;&]A=   50 . ", !0.  "JH    *P '
+M !(  !2X #AV7W5N<VEG;F5D7VQO;F<  %4 #  C  4#@  JY    "D !P 2
+M   4X0 X=E]S:6=N961?;&]N9P  50 + ", !0.  "ID    (@ ' !(  !4#
+M #AV7VQO;F<  %4 "@ C  4#@  JU    "H !P 2   5+0 X=E]U;G-I9VYE
+M9%]I;G0  %4 "0 C  4#@  J7    "@ !P 2   550 X=E]S:6=N961?:6YT
+M  !5  @ (P % X  *E@    A  < $@  %78 .'9?:6YT  !5  < (P % X  
+M*G@    L  < $@  %:( .'9?=6YS:6=N961?<VAO<G0  %4 !@ C  4#@  J
+M;    "H !P 2   5S  X=E]S:6=N961?<VAO<G0  %4 !0 C  4#@  JR   
+M ", !P 2   5[P X=E]S:&]R=   50 $ ", !0.  "K8    *P ' !(  !8:
+M #AV7W5N<VEG;F5D7V-H87(  %4  P C  4#@  JI    "D !P 2   60P X
+M=E]S:6=N961?8VAA<@  50 " ", !0.  "K@    (@ ' !(  !9E #AV7V-H
+M87(  %4  0 C  4#@  K9     0    '       "DH  !-P   !Y__\     
+M    >O__    ,@   'O__P   &0   !]__\   "6    ?O__    R    '__
+M_P   /H   "!__\   $L    @O__   !7@   (/__P   9    "%__\   '"
+M    AO__   !]    (?__P   B8   ")__\   )8    BO__   "E    ++_
+M_P   M    "U__\   +F    MO__   "[    +?__P   O0   "Y__\   +\
+M    NO__   #!    +O__P   PP   "]__\   ,4    OO__   #'@   +__
+M_P   R@   #!__\   ,R    PO__   #/    ,/__P   T8   #%__\   -0
+M    QO__   #6@   ,G__P   VX   #*__\   -X    R___   #@@   ,W_
+M_P   XP   #.__\   .6    S___   #H    -'__P   ZH   #2__\   .T
+M    T___   #O@   -7__P   \@   #6__\   /2    U___   #W    -G_
+M_P   ^8   #:__\   /P    W/__   $!    -W__P  ! X   #>__\   08
+M    X/__   $(@   .'__P  !"P   #B__\   0V    Y/__   $0    .7_
+M_P  !$H   #F__\   14    Z/__   $7@   .G__P  !&@   #J__\   1R
+M    [/__   $?    .W__P  !(8   #O__\   20    \/__   $F@   /'_
+M_P  !*0   #R__\   2N    ]/__   $N    /;__P  !,(   #W__\   3,
+M     /__   $X                                               
+M              $    !     H   -0   #4    $P               0  
+M       )    !0    *   #H    Z    ;P    #          0    $    
+M#P    L    "@  "I    J0   #     !     $    $    $    !<    #
+M     H   V0   -D    >P               0         ?    !     * 
+M  /@   #X    #     #    !P    0    ,    *0    $    &@  $$   
+M!!     $               $         "\    !    !H  !!0   04    
+M9               !    !0    T     0    :   1X   $>   !40     
+M          0         .@    $    &@  )O   ";P    $            
+M   $         $     !     X  *<    G     "               !   
+M      !&     0    .  "G(   )R    !P               0    $    
+M2P    8    #@  IY   ">0   !P    !          $    "    %0    (
+M     X  *E@   I8   !P               "         !9     @      
+M       *6   !P     /    '     0    0    80    ,             
+M$5@   34               !         &D    #             !8L    
+M                !         !P     P             6+    )      
+M          $         >@    $             %KP   #/            
+M   $         (,    !             !>,   6<               !   
+J      "*     0             M_    I0               0     
+ 
+end
diff --git a/gdb/testsuite/gdb.base/maint.exp b/gdb/testsuite/gdb.base/maint.exp
new file mode 100644
index 0000000..ba59ed1
--- /dev/null
+++ b/gdb/testsuite/gdb.base/maint.exp
@@ -0,0 +1,578 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# this file tests maintenance commands and help on those.
+
+# source file used is break.c
+
+
+#maintenance check-symtabs -- Check consistency of psymtabs and symtabs
+#maintenance space -- Set the display of space usage
+#maintenance time -- Set the display of time usage
+#maintenance demangle -- Demangle a C++ mangled name
+#maintenance dump-me -- Get fatal error; make debugger dump its core
+#maintenance print -- Maintenance command for printing GDB internal state
+#maintenance info -- Commands for showing internal info about the program being debugged
+#
+#maintenance print statistics -- Print statistics about internal gdb state
+#maintenance print objfiles -- Print dump of current object file definitions
+#maintenance print psymbols -- Print dump of current partial symbol definitions
+#maintenance print msymbols -- Print dump of current minimal symbol definitions
+#maintenance print symbols -- Print dump of current symbol definitions
+#maintenance print type -- Print a type chain for a given symbol
+#maintenance print unwind -- Print unwind table entry at given address
+#
+#
+#maintenance info sections -- List the BFD sections of the exec and core files
+#maintenance info breakpoints -- Status of all breakpoints
+#
+
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != ""
+ } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+        perror "tests suppressed"
+}
+
+
+# The commands we test here produce many lines of output; disable "press 
+# <return> to continue" prompts.
+send_gdb "set height 0\n"
+gdb_expect -re "$gdb_prompt $"
+
+# use a larger expect input buffer for long help outputs.
+match_max 6000
+
+#
+# this command does not produce any output
+# unless there is some problem with the symtabs and psymtabs
+# so that branch will really never be covered in this tests here!!
+#
+
+send_gdb "maint check-symtabs\n"
+gdb_expect  {
+        -re "^maint check-symtabs.*$gdb_prompt $"\
+                          { pass "maint check-symtabs" }
+        -re ".*$gdb_prompt $"       { fail "maint check-symtabs" }
+        timeout         { fail "(timeout) maint check-symtabs" }
+        }
+
+send_gdb "maint space\n"
+gdb_expect  {
+        -re "\"maintenance space\" takes a numeric argument\\..*$gdb_prompt $"\
+                        { pass "maint space" }
+        -re ".*$gdb_prompt $"       { fail "maint space" }
+        timeout         { fail "(timeout) maint space" }
+        }
+
+send_gdb "maint space 1\n"
+gdb_expect  {
+        -re "Space used: $decimal \\(\\+$decimal for this command\\).*$gdb_prompt $"\
+                        { pass "maint space 1" }
+        -re ".*$gdb_prompt $"       { fail "maint space 1" }
+        timeout         { fail "(timeout) maint space 1" }
+        }
+
+
+send_gdb "maint time\n"
+gdb_expect  {
+        -re "\"maintenance time\" takes a numeric argument\\..*Space used: $decimal \\(\\+$decimal for this command\\).*$gdb_prompt $"\
+                        { pass "maint time" }
+        -re ".*$gdb_prompt $"       { fail "maint time" }
+        timeout         { fail "(timeout) maint time" }
+        }
+
+send_gdb "maint time 1\n"
+gdb_expect  {
+        -re "Command execution time: $decimal.*Space used: $decimal \\(\\+$decimal for this command\\).*$gdb_prompt $"\
+                        { pass "maint time 1" }
+        -re ".*$gdb_prompt $"       { fail "maint time 1" }
+        timeout         { fail "(timeout) maint time 1" }
+        }
+
+send_gdb "maint time 0\n"
+gdb_expect  {
+        -re "Space used: $decimal \\(\\+$decimal for this command\\).*$gdb_prompt $"\
+                        { pass "maint time 0" }
+        -re ".*$gdb_prompt $"       { fail "maint time 0" }
+        timeout         { fail "(timeout) maint time 0" }
+        }
+
+
+send_gdb "maint space 0\n"
+gdb_expect  {
+        -re "maint space 0\r\n$gdb_prompt $"\
+                        { pass "maint space 0" }
+        -re ".*$gdb_prompt $"       { fail "maint space 0" }
+        timeout         { fail "(timeout) maint space 0" }
+        }
+
+send_gdb "maint demangle\n"
+gdb_expect  {
+        -re "\"maintenance demangle\" takes an argument to demangle\\..*$gdb_prompt $"\
+                        { pass "maint demangle" }
+        -re ".*$gdb_prompt $"       { fail "maint demangle" }
+        timeout         { fail "(timeout) maint demangle" }
+        }
+
+send_gdb "maint demangle main\n"
+gdb_expect  {
+        -re "Can't demangle \"main\".*$gdb_prompt $"\
+                        { pass "maint demangle" }
+        -re ".*$gdb_prompt $"       { fail "maint demangle" }
+        timeout         { fail "(timeout) maint demangle" }
+        }
+
+
+send_gdb "maint print statistics\n"
+gdb_expect  {
+        -re "Statistics for.*break.*Number of \"minimal\" symbols read.*Number of \"partial\" symbols read.*Number of \"types\" defined.*Total memory used for psymbol obstack.*Total memory used for psymbol cache.*Total memory used for symbol obstack.*Total memory used for type obstack.*$gdb_prompt $"\
+                        { pass "maint print statistics" }
+        -re ".*$gdb_prompt $"       { fail "maint print statistics" }
+        timeout         { fail "(timeout) maint print statistics" }
+        }
+
+send_gdb "maint print objfiles\n"
+# To avoid timeouts, we avoid expects with many .* patterns that match
+# many lines.
+gdb_expect  {
+    -re ".*Object file.*break:  Objfile at $hex, bfd at $hex, \[0-9\]* minsyms\[\r\t \]+\n"
+                            { pass "maint print objfiles: header" }
+    -re ".*$gdb_prompt $"   { fail "maint print objfiles: header" }
+    timeout                 { fail "(timeout) maint print objfiles: header" }
+}
+gdb_expect {
+    -re ".*Psymtabs:\[\r\t \]+\n" { pass "maint print objfiles: psymtabs" }
+    -re ".*$gdb_prompt $"         { fail "maint print objfiles: psymtabs" }
+    timeout                { fail "(timeout) maint print objfiles: psymtabs" }
+}
+gdb_expect {
+    -re ".*Symtabs:\[\r\t \]+\n"  { pass "maint print objfiles: symtabs" }
+    -re ".*$gdb_prompt $"         { fail "maint print objfiles: symtabs" }
+    timeout                { fail "(timeout) maint print objfiles: symtabs" }
+}
+gdb_expect {
+    -re ".*$gdb_prompt $"   { pass "maint print objfiles: prompt" }
+    timeout                 { fail "(timeout) maint print objfiles: prompt" }
+}
+
+send_gdb "maint print psymbols\n"
+gdb_expect  {
+        -re "print-psymbols takes an output file name and optional symbol file name.*$gdb_prompt $"\
+                        { pass "maint print psymbols w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint print psymbols w/o args" }
+        timeout         { fail "(timeout) maint print psymbols w/o args" }
+        }
+
+send_gdb "maint print psymbols psymbols_output\n"
+gdb_expect  {
+        -re "^maint print psymbols psymbols_output\r\n$gdb_prompt $"\
+         {
+          send_gdb "shell ls psymbols_output\n"
+          gdb_expect {
+                -re "psymbols_output\r\n$gdb_prompt $"\
+                 {
+	          # We want this grep to be as specific as possible,
+	          # so it's less likely to match symbol file names in
+	          # psymbols_output.  Yes, this actually happened;
+	          # poor expect got tons of output, and timed out
+	          # trying to match it.   --- Jim Blandy <jimb@cygnus.com>
+                  send_gdb "shell grep 'main.*function' psymbols_output\n"
+                  gdb_expect {
+                        -re ".main., function, $hex.*$gdb_prompt $"\
+                                               { pass "maint print psymbols" }
+                        -re ".*$gdb_prompt $"       { fail "maint print psymbols" }
+                         timeout         { fail "(timeout) maint print psymbols" }
+                         }
+                  gdb_test "shell rm -f psymbols_output" ""
+                   
+                  }
+                 -re ".*$gdb_prompt $"       { fail "maint print psymbols" }
+                  timeout         { fail "(timeout) maint print psymbols" }
+                  }
+         }
+        -re ".*$gdb_prompt $"       { fail "maint print psymbols" }
+        timeout         { fail "(timeout) maint print psymbols" }
+        }
+
+
+send_gdb  "maint print msymbols\n"
+gdb_expect  {
+        -re "print-msymbols takes an output file name and optional symbol file name.*$gdb_prompt $"\
+                        { pass "maint print msymbols w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint print msymbols w/o args" }
+        timeout         { fail "(timeout) maint print msymbols w/o args" }
+        }
+
+send_gdb "maint print msymbols msymbols_output\n"
+gdb_expect  {
+        -re "^maint print msymbols msymbols_output\r\n$gdb_prompt $"\
+         {
+          send_gdb "shell ls msymbols_output\n"
+          gdb_expect {
+                -re "msymbols_output\r\n$gdb_prompt $"\
+                 {
+                  send_gdb "shell grep factorial msymbols_output\n"
+                  gdb_expect {
+                        -re "\\\[ *$decimal\\\] T\[ \t\]+$hex factorial.*$gdb_prompt $"\
+                                               { pass "maint print msymbols" }
+                        -re ".*$gdb_prompt $"       { fail "maint print msymbols" }
+                         timeout         { fail "(timeout) maint print msymbols" }
+                         }
+                  gdb_test "shell rm -f msymbols_output" ""
+
+                  }
+                 -re ".*$gdb_prompt $"       { fail "maint print msymbols" }
+                  timeout         { fail "(timeout) maint print msymbols" }
+                  }
+         }
+        -re ".*$gdb_prompt $"       { fail "maint print msymbols" }
+        timeout         { fail "(timeout) maint print msymbols" }
+        }
+
+
+send_gdb "maint print symbols\n"
+gdb_expect  {
+        -re "Arguments missing: an output file name and an optional symbol file name.*$gdb_prompt $"\
+                        { pass "maint print symbols w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint print symbols w/o args" }
+        timeout         { fail "(timeout) maint print symbols w/o args" }
+        }
+
+send_gdb "maint print symbols symbols_output\n"
+gdb_expect  {
+        -re "^maint print symbols symbols_output\r\n$gdb_prompt $"\
+         {
+          send_gdb "shell ls symbols_output\n"
+          gdb_expect {
+                -re "symbols_output\r\n$gdb_prompt $"\
+                 {
+	          # See comments for `maint print psymbols'.
+                  send_gdb "shell grep 'main.*block' symbols_output\n"
+                  gdb_expect {
+                        -re "int main\\(int, char \\*\\*, char \\*\\*\\); block.*$gdb_prompt $"\
+                                               { pass "maint print symbols" }
+                        -re ".*$gdb_prompt $"       { fail "maint print symbols" }
+                         timeout         { fail "(timeout) maint print symbols" }
+                         }
+                  gdb_test "shell rm -f symbols_output" ""
+
+                  }
+                 -re ".*$gdb_prompt $"       { fail "maint print symbols" }
+                  timeout         { fail "(timeout) maint print symbols" }
+                  }
+         }
+        -re ".*$gdb_prompt $"       { fail "maint print symbols" }
+        timeout         { fail "(timeout) maint print symbols" }
+        }
+
+
+send_gdb "maint print type argc\n"
+gdb_expect  {
+        -re "type node $hex\r\nname .int. \\($hex\\)\r\ncode $hex \\(TYPE_CODE_INT\\)\r\nlength 4\r\nobjfile $hex\r\ntarget_type $hex\r\npointer_type $hex\r\nreference_type $hex\r\nflags $hex\r\nnfields 0 $hex\r\nvptr_basetype $hex\r\nvptr_fieldno -1\r\ntype_specific $hex\r\n$gdb_prompt $"\
+                        { pass "maint print type" }
+        -re ".*$gdb_prompt $"       { fail "maint print type" }
+        timeout         { fail "(timeout) maint print type" }
+        }
+
+#send_gdb "maint print unwind &main\n"
+#gdb_expect  {
+#        -re ".*unwind_table_entry \\($hex\\):\r\n\tregion_start = $hex <main>\r\n\tregion_end = $hex <main\\+220>\r\n\tflags = Args_stored Save_RP\r\n\tRegion_description = $hex\r\n\tEntry_FR = $hex\r\n\tEntry_GR = $hex\r\n\tTotal_frame_size = $hex\r\n$gdb_prompt $"\
+#                        { pass "maint print unwind" }
+#        -re ".*$gdb_prompt $"       { fail "maint print unwind" }
+#        timeout         { fail "(timeout) maint print unwind" }
+#        }
+
+set oldtimeout $timeout
+set timeout [expr $timeout + 300]
+
+# It'd be nice to check for every possible section.  However, that's
+# problematic, since the relative ordering wanders from release to
+# release of the compilers.  Instead, we'll just check for two
+# sections which appear to always come out in the same relative
+# order.  (If that changes, then we should just check for one
+# section.)
+#
+# And by the way: This testpoint will break for PA64, where a.out's
+# are ELF files.
+#
+send_gdb "maint info sections\n"
+gdb_expect  {
+        -re "Exec file:\r\n.*break., file type.*$gdb_prompt $"\
+                        { pass "maint info sections" }
+        -re ".*$gdb_prompt $"       { fail "maint info sections" }
+        timeout         { fail "(timeout) maint info sections" }
+        }
+
+send_gdb "maint info breakpoints\n"
+gdb_expect {
+    -re "Num\[ \t\]+Type\[ \t\]+Disp\[ \t\]+Enb\[ \t\]+Address\[ \t\]+What\r\n1\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex in main at.*break.c:60\r\n\[ \t\]+breakpoint already hit 1 time\r\n.*$gdb_prompt $"\
+				{ pass "maint info breakpoints" }
+    -re ".*$gdb_prompt $"       { fail "maint info breakpoints" }
+    timeout			{ fail "(timeout) maint info breakpoints" }
+}
+
+# Try it again, and check for shlib event info.  Not supported everywhere.
+if {! [istarget "hppa*-*-hpux*"]} then {
+    setup_xfail "*-*-*"
+}
+send_gdb "maint info breakpoints\n"
+gdb_expect  {
+    -re "Num\[ \t\]+Type\[ \t\]+Disp\[ \t\]+Enb\[ \t\]+Address\[ \t\]+What\r\n1\[ \t\]+breakpoint\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex in main at.*break.c:60\r\n\[ \t\]+breakpoint already hit 1 time\r\n-1\[ \t\]+shlib events\[ \t\]+keep\[ \t\]+y\[ \t\]+$hex.*breakpoint already hit.*$gdb_prompt $"\
+	    { pass "maint info breakpoints: shlib events" }
+    -re ".*$gdb_prompt $" {
+	fail "maint info breakpoints: shlib events"
+    }
+    timeout {
+	fail "(timeout) maint info breakpoints: shlib events"
+    }
+}
+
+
+send_gdb "maint print\n"
+gdb_expect  {
+        -re "\"maintenance print\" must be followed by the name of a print command\\.\r\nList.*unambiguous\\..*$gdb_prompt $"\
+                        { pass "maint print w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint print w/o args" }
+        timeout         { fail "(timeout) maint print w/o args" }
+        }
+
+send_gdb "maint info\n"
+gdb_expect  {
+        -re "\"maintenance info\" must be followed by the name of an info command\\.\r\nList.*unambiguous\\..*$gdb_prompt $"\
+                        { pass "maint info w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint info w/o args" }
+        timeout         { fail "(timeout) maint info w/o args" }
+        }
+
+send_gdb "maint\n"
+gdb_expect  {
+        -re "\"maintenance\" must be followed by the name of a maintenance command\\.\r\nList.*unambiguous\\..*$gdb_prompt $"\
+                        { pass "maint w/o args" }
+        -re ".*$gdb_prompt $"       { fail "maint w/o args" }
+        timeout         { fail "(timeout) maint w/o args" }
+        }
+
+
+set timeout $oldtimeout
+
+#============test help on maint commands
+
+send_gdb "help maint\n"
+gdb_expect  {
+        -re "Commands for use by GDB maintainers\\..*Includes commands to dump specific internal GDB structures in.*a human readable form, to cause GDB to deliberately dump core,.*to test internal functions such as the C.. demangler, etc\\..*List of maintenance subcommands:.*maintenance check-symtabs.*maintenance demangle.*maintenance dump-me.*maintenance info.*maintenance print.*maintenance space.*maintenance time.*Type.*help maintenance.*followed by maintenance subcommand name for full documentation\\..*Command name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\
+ { pass "help maint" }
+        -re ".*$gdb_prompt $"       { fail "help maint" }
+        timeout         { fail "(timeout) help maint" }
+        }
+
+
+send_gdb "help maint check-symtabs\n"
+gdb_expect  {
+        -re "Check consistency of psymtabs and symtabs\\..*$gdb_prompt $"\
+                        { pass "help maint check-symtabs" }
+        -re ".*$gdb_prompt $"       { fail "help maint check-symtabs" }
+        timeout         { fail "(timeout) help maint check-symtabs" }
+        }
+
+send_gdb "help maint space\n"
+gdb_expect  {
+        -re "Set the display of space usage\\.\r\nIf nonzero, will cause the execution space for each command to be\r\ndisplayed, following the command's output\\..*$gdb_prompt $"\
+                        { pass "help maint space" }
+        -re ".*$gdb_prompt $"       { fail "help maint space" }
+        timeout         { fail "(timeout) help maint space" }
+        }
+
+send_gdb "help maint time\n"
+gdb_expect  {
+        -re "Set the display of time usage\\.\r\nIf nonzero, will cause the execution time for each command to be\r\ndisplayed, following the command's output\\..*$gdb_prompt $"\
+                        { pass "help maint time" }
+        -re ".*$gdb_prompt $"       { fail "help maint time" }
+        timeout         { fail "(timeout) help maint time" }
+        }
+
+send_gdb "help maint demangle\n"
+gdb_expect  {
+        -re "Demangle a C\\+\\+ mangled name\\.\r\nCall internal GDB demangler routine to demangle a C\\+\\+ link name\r\nand prints the result\\..*$gdb_prompt $"\
+                        { pass "help maint demangle" }
+        -re ".*$gdb_prompt $"       { fail "help maint demangle" }
+        timeout         { fail "(timeout) help maint demangle" }
+        }
+
+send_gdb "help maint dump-me\n"
+gdb_expect  {
+        -re "Get fatal error; make debugger dump its core\\.\r\nGDB sets it's handling of SIGQUIT back to SIG_DFL and then sends\r\nitself a SIGQUIT signal\\..*$gdb_prompt $"\
+                        { pass "help maint dump-me" }
+        -re ".*$gdb_prompt $"       { fail "help maint dump-me" }
+        timeout         { fail "(timeout) help maint dump-me" }
+        }
+
+send_gdb "help maint print statistics\n"
+gdb_expect  {
+        -re "Print statistics about internal gdb state\\..*$gdb_prompt $"\
+                        { pass "help maint print statistics" }
+        -re ".*$gdb_prompt $"       { fail "help maint print statistics" }
+        timeout         { fail "(timeout) help maint print statistics" }
+        }
+
+send_gdb "help maint print objfiles\n"
+gdb_expect  {
+        -re "Print dump of current object file definitions\\..*$gdb_prompt $"\
+                        { pass "help maint print objfiles" }
+        -re ".*$gdb_prompt $"       { fail "help maint print objfiles" }
+        timeout         { fail "(timeout) help maint print objfiles" }
+        }
+
+send_gdb "help maint print psymbols\n"
+gdb_expect  {
+        -re "Print dump of current partial symbol definitions\\.\r\nEntries in the partial symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's partial symbols\\..*$gdb_prompt $"\
+                        { pass "help maint print psymbols" }
+        -re ".*$gdb_prompt $"       { fail "help maint print psymbols" }
+        timeout         { fail "(timeout) help maint print psymbols" }
+        }
+
+send_gdb "help maint print msymbols\n"
+gdb_expect  {
+        -re "Print dump of current minimal symbol definitions\\.\r\nEntries in the minimal symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's minimal symbols\\..*$gdb_prompt $"\
+                        { pass "help maint print msymbols" }
+        -re ".*$gdb_prompt $"       { fail "help maint print msymbols" }
+        timeout         { fail "(timeout) help maint print msymbols" }
+        }
+
+send_gdb "help maint print symbols\n"
+gdb_expect  {
+        -re "Print dump of current symbol definitions\\.\r\nEntries in the full symbol table are dumped to file OUTFILE\\.\r\nIf a SOURCE file is specified, dump only that file's symbols\\..*$gdb_prompt $"\
+                        { pass "help maint print symbols" }
+        -re ".*$gdb_prompt $"       { fail "help maint print symbols" }
+        timeout         { fail "(timeout) help maint print symbols" }
+        }
+
+
+send_gdb "help maint print type\n"
+gdb_expect  {
+        -re "Print a type chain for a given symbol\\.\r\nFor each node in a type chain, print the raw data for each member of\r\nthe type structure, and the interpretation of the data\\..*$gdb_prompt $"\
+                        { pass "help maint print type" }
+        -re ".*$gdb_prompt $"       { fail "help maint print type" }
+        timeout         { fail "(timeout) help maint print type" }
+        }
+
+#send_gdb "help maint print unwind\n"
+#gdb_expect  {
+#        -re "Print unwind table entry at given address\\..*$gdb_prompt $"\
+#                        { pass "help maint print unwind" }
+#        -re ".*$gdb_prompt $"       { fail "help maint print unwind" }
+#        timeout         { fail "(timeout) help maint print unwind" }
+#        }
+
+send_gdb "help maint info sections\n"
+gdb_expect  {
+        -re "List the BFD sections of the exec and core files\\..*$gdb_prompt $"\
+                        { pass "help maint info sections" }
+        -re ".*$gdb_prompt $"       { fail "help maint info sections" }
+        timeout         { fail "(timeout) help maint info sections" }
+        }
+
+
+send_gdb "help maint info breakpoints\n"
+gdb_expect  {
+-re "Status of all breakpoints, or breakpoint number NUMBER.*$gdb_prompt $" { pass "help maint info breakpoints" }
+        -re ".*$gdb_prompt $"       { fail "help maint info breakpoints" }
+        timeout         { fail "(timeout) help maint info breakpoints" }
+        }
+
+#send_gdb "help maint info breakpoints\n"
+#expect  {
+#        -re "Status of all breakpoints, or breakpoint number NUMBER\\.\[ \r\n\t\]+The \"Type\" column indicates one of:\[ \r\n\t\]+breakpoint\[ \t\]+- normal breakpoint\[ \r\n\t\]+watchpoint\[ \t\]+- watchpoint\[ \r\n\t\]+longjmp\[ \t\]+- internal breakpoint used to step through longjmp\\(\\)\[ \r\n\t\]+longjmp resume - internal breakpoint at the target of longjmp\\(\\)\[ \r\n\t\]+until\[ \t\]+- internal breakpoint used by the \"until\" command\[ \r\n\t\]+finish\[ \t\]+- internal breakpoint used by the \"finish\" command\[ \r\n\t\]+The \"Disp\" column contains one of \"keep\", \"del\", or \"dis\" to indicate\[ \r\n\t\]+the disposition of the breakpoint after it gets hit\\.  \"dis\" means that the\[ \r\n\t\]+breakpoint will be disabled\\.  The \"Address\" and \"What\" columns indicate the\[ \r\n\t\]+address and file.line number respectively\\.\[ \r\n\t\]+Convenience variable \".*\" and default examine address for \"x\"\[ \r\n\t\]+are set to the address of the last breakpoint listed\\.\[ \r\n\t\]+Convenience variable \".bpnum\" contains the number of the last\[ \r\n\t\]+breakpoint set\\..*$gdb_prompt $"\
+#                        { pass "help maint info breakpoints" }
+#        -re ".*$gdb_prompt $"       { fail "help maint info breakpoints" }
+#        timeout         { fail "(timeout) help maint info breakpoints" }
+#        }
+
+send_gdb "help maint info\n"
+gdb_expect  {
+        -re "Commands for showing internal info about the program being debugged.*unambiguous\\..*$gdb_prompt $"\
+                        { pass "help maint info" }
+        -re ".*$gdb_prompt $"       { fail "help maint info" }
+        timeout         { fail "(timeout) help maint info" }
+        }
+
+send_gdb "help maint print\n"
+gdb_expect  {
+        -re "Maintenance command for printing GDB internal state\\.\[\r\n\]+List of maintenance print subcommands:\[\r\n\]+maintenance print msymbols -- Print dump of current minimal symbol definitions.*maintenance print objfiles -- Print dump of current object file definitions.*maintenance print psymbols -- Print dump of current partial symbol definitions.*maintenance print statistics -- Print statistics about internal gdb state.*maintenance print symbols -- Print dump of current symbol definitions.*maintenance print type -- Print a type chain for a given symbol.*Type .help maintenance print. followed by maintenance print subcommand name for full documentation\\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\
+                        { pass "help maint print" }
+        -re ".*$gdb_prompt $"       { fail "help maint print" }
+        timeout         { fail "(timeout) help maint print" }
+        }
+
+send_gdb "help maint\n"
+gdb_expect  {
+        -re "Commands for use by GDB maintainers\\.\[\r\n\]+Includes commands to dump specific internal GDB structures in\[\r\n\]+a human readable form, to cause GDB to deliberately dump core,\[\r\n\]+to test internal functions such as the C\\+\\+ demangler, etc\\..*Type.*help maintenance.*followed by maintenance subcommand name for full documentation\\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\\..*$gdb_prompt $"\
+                        { pass "help maint" }
+        -re ".*$gdb_prompt $"       { fail "help maint" }
+        timeout         { fail "(timeout) help maint" }
+        }
+
+#set oldtimeout $timeout
+#set timeout [expr $timeout + 300]
+
+send_gdb "maint dump-me\n"
+gdb_expect  {
+        -re "Should GDB dump core.*\\(y or n\\) $"\
+          { send_gdb "n\n"
+            gdb_expect {
+                    -re ".*$gdb_prompt $"       { pass "maint dump-me" }
+                    timeout         { fail "(timeout)  maint dump-me" }
+                   }
+          }
+        -re ".*$gdb_prompt $"       { fail "maint dump-me" }
+        timeout         { fail "(timeout) maint dump-me" }
+        }
+
+#set timeout $oldtimeout
+
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/mips-ecoff.u b/gdb/testsuite/gdb.base/mips-ecoff.u
new file mode 100644
index 0000000..69f656a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/mips-ecoff.u
@@ -0,0 +1,671 @@
+begin 777 mips-ecoff
+M 6  "2G<_%0  #      8  X  <!"P(*   @    $    )=  $ !P !    0
+M    $  0 //___X        -T           $ "*@"YT97AT     $ !P ! 
+M <   !E0   !P                    " N:6YI=     ! &Q  0!L0    
+M(   &Q                "     +F1A=&$    0    $       "I   "  
+M                    0"YL:70X    $  *D!  "I     0   JD       
+M          @    N;&ET-    !  "J 0  J@    $   *J              
+M   0    +G-D871A   0  JP$  *L    &   "JP        ,          "
+M "YS8G-S    $  +$!  "Q    %              #          !  N8G-S
+M     !  #% 0  Q0  ":\                         " <G-R8P      
+M                                     "                   (^D
+M   \'! !)Z4 !"><BH DI@ $  00@*^%@90 PC A)[W_Z*^&@#"OH  4  #P
+M(0P0!L>OA(&0#! !9      ,$ %H   @(8^$@9"/A8&4CX: , P0 .L     
+M#! !I ! ("$    - ^  "      GO0 ( ^  "  @^"$#X  (            
+M          /@  @  ! A ^  "      #X  (      /@  @  ! A ^  "   
+M   #X  (      /@  @  ! A ^  "      #X  (      /@  @  ! A ^  
+M"      #X  (      /@  @  ! A ^  "      #X  (      /@  @  ! A
+M ^  "      #X  (      /@  @  ! A ^  "      #X  (      /@  @ 
+M ! A ^  "      #X  (      /@  @  ! A ^  "      #X  (      /@
+M  @  ! A ^  "      #X  (      /@  @  ! A ^  "      #X  (    
+M  /@  @  ! A ^  "      #X  (     $2    #X  (      /@  @     
+M ^  "     !$@   1( (  /@  @      ^  "      #X  (     *. @) D
+M#@ !HXZ D20/  *CCX"2)!@  Z>8@)0D&0 $IYF EB0(  6GB("8) D !J^)
+M@)PD"@ 'KXJ H"0+  BOBX"D) P ":^,@*@D#0 *KXV K"0.  NOCH"PQX2 
+M(     #GA("TQX> $,>&@!3GAX"XYX: O)./@)      HX^ P).8@)$     
+MHYB PI.9@)(     HYF Q(>(@)0     IXB R(>)@)8     IXF S)>*@)@ 
+M    IXJ T(^+@)P     KXN V(^,@*      KXR X(^-@*0     KXV Z(^.
+M@*@     KXZ \(^/@*P     KX^ ^(^8@+      KYB! ,>(@+0     YXB!
+M",>+@+C'BH"\/ $0 .0K8_#D*F/T)YF D*^9@1 GB("1KXB!%">)@)*OB8$8
+M)XJ E*^*@1PGBX"6KXN!(">,@)BOC($D)XV G*^-@2@GCH"@KXZ!+">/@*2O
+MCX$P)YB J*^8@30GF8"LKYF!.">(@+"OB($\)XF M*^)@4 GBH"XKXJ!1"0+
+M  *OBX%<) P  J^,@6 D#0 !KXV!:"0.  &OCH%DCX^!6#P!$ "L+V,PAYB!
+M2     "GF(%0 ^  "   $"$#X  (           #X  (                
+M)[W]4 " &"$D#O__K[\ '!1@ !&OK@ D/ 00  P0 ;0DA ($$$  !0! &"&0
+M3P       !7@  @     DYB 0      3   #     !   ",  ! A)X. 1#P%
+M$ "C@(! )*4"$">D C ,$ 'TKZ,"L(^C K GI (^#! !] !@*"$GI (P#! "
+M(   *"$$0  1 $ @(2>E "PD!@("#! "**^D "@D 0("%$$ "(^D "@\!!  
+M)(0  ">E "P,$ (P) 8" J^@ "2/I  H#! "]     "/H@ D     (^_ !PG
+MO0*P ^  "           )[W_X*^_ !P,$ ,.KZ0 ( P0 R@     CZ0 ( P0
+M!4P     C[\ '">] " #X  (                     ">]_^"/@H PK[$ 
+M&*^P !0 @(@AK[\ '!1   , 0( A$   %0  $"&/CH P     (W/        
+M$>  #P  $"&.!0        (@("$,$ '7)A  !!!   , 0!@A$   !@!@$"&.
+M!0       !2@__<"(" A   0(8^_ !R/L  4C[$ & /@  @GO0 @D*(  )"#
+M   DI0 !$$, !"0& #T0   ,) 8 /20& #T 8! A%$8  R2$  $#X  ( * 0
+M(9"B  "0@P  )*4  1!#__@ 8! A%&  "   $"&0KO__     !3.  0  ! A
+M ^  " "@$"$  ! A ^  "       @! A@*@  #2-  ,1   D :1P(H"I  $ 
+MKG@@$2  'P    " J@ "     !%  !J(K   @*L  YBL  ,18  4J(P  "&D
+M__V!Z  !(>\ !!$  !,@A  $@>G__@     1(  .     ('J__\     $4  
+M"8GL__V!ZP  F>P  !5@__&LC    ^  "      #X  (N(P  Z"*  *@B0 !
+M ^  "*"(             "0" ^T    ,$.   P     ($ 50      /@  @ 
+M    ) (#ZP    P0X  #      @0!5       ^  "      0P  : ( X(1"D
+M !@ A0@J%"  ""C! !  IA @ (((*A @  0HP0 0$   6RC! ! HP0 0%"  
+M!0     PH@ #,(,  Q!#  L     $,  !P      IA@A@*(  "2E  $DA  !
+M%*/__*""__\#X  ( . 0(1!  !@D 0 !$$$ #R0!  (000 '     ("B   D
+MI0 !)(0  23&__\0   .H(+__X2B   DI0 ")(0  B3&__X0   (I(+__H"B
+M  "$HP !H((  "2E  ,DA  #),;__:2#__XHP0 @%"  %BC! !",H@  C*, 
+M!(RH  B,J0 ,C*H $(RK !2,K  8C*T '*R"  "L@P $K(@ "*R)  RLB@ 0
+MK(L %*R, !@DI0 @)(0 ("3&_^ 0 /_JK(W__"C! ! 4(  .*,$ !(RB  ",
+MHP $C*@ "(RI  RL@@  K(, !*R(  @DI0 0)(0 $"3&__ 0 /_RK(G__"C!
+M  04(/^U     (RB   DI0 $)(0 !"3&__P0 /_XK(+__"C! !  IB@@%"  
+M!0"&(" PH@ #,(,  Q!#  T     $,#_K0     DI?__)(3__P"F&". H@  
+M)*7__R2$__\4H__\H((  0/@  @ X! A$$  &"0!  ,000 /) $  A!!  < 
+M    @*+__R2E__\DA/__),;__Q    Z@@@  A*+__B2E__XDA/_^),;__A  
+M  BD@@  @*+__X2C__V@@O__)*7__22$__TDQO_]I(,  "C! " 4(  6*,$ 
+M$(RB__R,H__XC*C_](RI__",JO_LC*O_Z(RL_^2,K?_@K(+__*R#__BLB/_T
+MK(G_\*R*_^RLB__HK(S_Y"2E_^ DA/_@),;_X!  _^JLC0  *,$ $!0@  XH
+MP0 $C*+__(RC__B,J/_TC*G_\*R"__RL@__XK(C_]"2E__ DA/_P),;_\!  
+M__*LB0  *,$ !!0@_[,     C*+__"2E__PDA/_\),;__!  __BL@@      
+M            ) (#[@    P0X  #      @0!5       ^  "   $"$0@  /
+M) (  8^#@&      *&$ (! @  HD @ !  -P@#P!$   +@@A)&,  :PD B"O
+M@X!@ ^  "   $"$D @ ! ^  "     "/@X!@)[W_X*^_ !ROL0 8K[  %!A@
+M  \D8O__/ \0 "7O B   G" /!$0 "8Q B !SX ACA@        # /@)    
+M "80__P"$0@K$"#_^0    "/OP <C[  %(^Q !@#X  ()[T ((^.@' GO?_@
+M/ \0 *^P !@E[P0U/! 0  '/""NOOP <%"  $280!#0\&!  CQ@+       3
+M   %      P0 W8" " A$    P     ,$ -& @ @(8^9@' F$  0 AD(*Q0@
+M__$     C[\ '(^P !@#X  ()[T (">]_]BOL  8 (" (:^_ !P6   #) /_
+M_Q   "4D O__D@( #      P3@"#$<  %#!8  @P3P &) $  A7A  8  !@A
+M#! #=@( ("$0   " $ 8(0  &"&2!  -#! "]*^C "2/HP D!$$  @     D
+M ___D@( #      P6  ($P  !@    ".!  (#! &&J^C "2/HP DK@  "(X9
+M  BB   ,K@    !@$"&N&0 $C[\ '(^P !@#X  ()[T *">]_^"OL  8 (" 
+M(18  !.OOP <CXZ <#P/$  E[P0U/! 0  '/""L4(  *)A $-!(   ,     
+M#! #=@( ("&/F(!P)A  $ (8""L4(/_X     !   #@  ! AD@, #      P
+M8@ "%$  ##!H  2.!0  D@0 #20&  $,$ 9P  4H(XX9  BN       0(1  
+M "FN&0 $,&@ !!4  " P;0 @$$  'C!M "". @ (     !!  !HP;0 @C@D 
+M!       20@K$"  %3!M " ,$ 14 @ @(9(#  P     ,&H !!5   XP;0 @
+M,&L  A%@  LP;0 @C@( "      00  ',&T ((X,  0      $P(*Q0@_^X 
+M    ,&T (!&@  0  !@A$    B0#__\  !@A & 0(8^_ !R/L  8 ^  "">]
+M " GO?^PK[  '*^_ "ROLP H *" (:^R "2OL0 @KZ0 4)(#  PD$0!")!( 
+M!B03  (P;@!2%BX )3!L !:2#P -/!D0   /P( #.,@ACSD"H(X"  0     
+M %D(*Q @ $\     CZ@ 4"0!  J@2   C@D !      E*@ !K@H !).K %, 
+M    $6$ !     "/H@!0$   8(^_ "P,$ 14 @ @(20!__\400 $CZ, 4!  
+M  ,D ___CZ, 4      0  !4 & 0(3!L !863  4,'@ $H^M % GI0!,HZT 
+M3)($  VN    #! &>"0&  $D 0 !%$$ !     "/H@!0$   18^_ "R2#@ ,
+M) +__S7/ " 0   _H@\ ##!X !(6>  0     (X"  @     $$  #     ".
+M&0 $     !19  P     C@@        5   (     #!I $05(  &   8(0P0
+M!)H" " A$    @! &"$  !@A$&   P     0   D) +__Y(#  P     ,&H 
+M1!5 _Z<P;@!2#! $5 ( ("&. @       "1"__\$00 &K@(  ).D %,,$ /(
+M @ H(1    J2#P ,CZL 4(X,  0     H8L  (X-  0     ):X  :X.  22
+M#P ,     #'X " 3   $CZ, 4!    ,D ___CZ, 4       8! AC[\ +(^P
+M !R/L0 @C[( )(^S "@#X  ()[T 4">]_^"OOP 4 ( X(8SC  B0[P ,C.X 
+M! !@*"$Q^ !$K.4 !!,   @!Q3 CD/D #3P)$  E*0*@ !E @ $)("$0   *
+MK.   )#J  T\#!  )8P"H  *6( !;" AC(T        !HQ CK.(  (SB    
+M    !$$ ! ! &"$0   "   8(0! &"&,C@  C.\ !      !S\ C P,(*A @
+M  H     KZ4 '*^F !@ X" A#! %-J^G ""/I0 <CZ8 &(^G "      &,  
+M#P  $"&0Y  -KZ< ( P0!GBOI@ 8CZ8 &(^G " 0P@ '   0(9#Y  PD O__
+M-R@ (!    *@Z  ,   0(8^_ !0GO0 @ ^  "      GO?_HK[\ %)""  PD
+M 0 ",$X $A'!  P     ,$\ @A7@  8D ?_O#! &@R0$  D0   R) +__R0!
+M_^\ 0< D-QD  J"9  R,@P (     !1@  <     #! $W:^D !B/I  8    
+M (R#  @     C(@ !      4:  @   0(9")  P     ,2H 1!5  !L  ! A
+MD(L #3P-$  EK0*@  M@@ &-*"&,K@        '#>".LCP  C((        $
+M00 $ $ 8(1    (  !@A $ 8(8RX  ",F0 $      ,90",! P@J$"  !   
+M$"$,$ 4V        $"&/OP 4)[T & /@  @     )[W_X*^_ !0 @"@AD*X 
+M#)"C  TQSP $$>  # !@,"$\&1  )SE@"  &P, #&1 A  -(@#P!$   *0@A
+MK*( ""1(  @0   TK"@"H"C!  (0(  3     !3   8     / ,0 "1C$ "L
+MHP ($   !0!@$"$\ Q  )&-  *RC  @ 8! AD*L #3P!$   "V"  "P((21*
+M(  0   ?K"H"H*^E " D!" (#! %5*^F !R/I0 @CZ8 '!!   RLH@ (D*T 
+M#)"Y  V,KP (/ $0 #6N  @ &4" H*X #  H""$E^"  $   #*PX J \"Q  
+MD*P #25K8 @ !DC  2L0(3P!$   #&B  "T((:RB  @D2@ (K"H"H(RN  @ 
+MP" AK*X ! P0!HBOI0 @CZ4 (!!   F/OP 4D*( #      P3P $%>  !(^_
+M !0T60! H+D #(^_ !0GO0 @ ^  "     "0C@ -/ ,0   .>(  ;Q@AC&,"
+MH(R8  0      '@0(P1!  ,      ^  "*R#  2,F0        !9""H0(  "
+M     *R"   #X  (                ) (#Z0    P#X  (     #P!$ "L
+M(@P8 ^  ""0"__\GO?^HK[8 +*^R !ROOP TK[< ,*^U "B/CH%PK[0 )*^S
+M ""OL0 8 ("0(:^P !01P  $  "P(8^%@800   +)Y6!<">"@70GE8%PKX*!
+M?#1/  &OCX%P-K@  0*@."&OF(%T $ H(:^'@7B/AX%X)!?__R04__X X(@A
+M   P(8XC         & 0(3!9  $7(  = B" (0!@@"&. @  )D0 !P $(((P
+M2  !%0  #@ $(( "(#@AKX>!>!2P  *N(@   B H(8XC         &" (8X"
+M        ,$D  1$@__8      B00(0("""L4(  # %$(*Q @ &H      & 0
+M(0(@@"$ 5(@D A$(*Q0@_]L     CXJ!?      2"@ #     !    2OA8&$
+M$C4 !23&  &OA8&$$   :P  $"$DQ@ !+,$  A0@_\P     )D, !P #&(*O
+MHP X *"((0  ("$,$ :@KX6!A(^+@7R/HP X)6P !!!,  P 0( A)&8'_P &
+M,L(P1  #$(  $  &,T D#0 $ :08(P!@L"$ 0X A$   "@#6,"&/A8&$CXZ!
+M?      !Q7@C  _ @P!X,",DQ@@   8RP@ &,T "!L@A S (*Q @  0\ 7__
+M$   00  $"$\ 7__-"'@ 0#!""L4(  - ,"8(3P$?_\TA.  #! &H*^F $B/
+MI@!(%%< !#P!@  0   S   0(3P!@  T(2   ,$P(0P0!J  P" A%%< !0  
+M   ,$ :L @ @(1   "@  ! ACXB!? (32"$!-E C)4O__*T0  "N"P  CXR!
+M? ( *"$EC0 $$@T !3:B  &-C@       #7/  &MCP  CA@       "OF(%\
+MCYF!?!  _W>O(@   $ X(0#P""L0(  &-.D  8SH        KXB!@*SC   T
+MZ0 !$+$ !*XI  "OAX%X$   !*^%@80 X"@AKX6!A*^'@7@F(@ $C[\ -(^P
+M !2/L0 8C[( '(^S ""/M  DC[4 *(^V "R/MP P ^  "">] %@0@  - ( 0
+M(22"__RO@H%XC$X  "0!__X!P7@DK$\  (Q9  "/F(%\     !<9  (     
+MKX*!A /@  @     )[W_R*^P !@ @( A$@  .*^_ !R. O_\     #!.  $1
+MP  ( % 8(P( ("$,$ 8:KZ4 /(^E #R. O_\      !0&",  QB#KZ, ) "@
+M("$,$ 54KZ4 /(^C "2/I0 \$$  !0! ("$04  #     !2@  0DIP #$   
+M(0" $"$DIP #  <X@@#C""L0(  "      #@&"&OI  T @ H(0 #,( ,$ (P
+MKZ< ((^D #2/IP @ % (*Q @ !        =X@ !/&"$ < @K%"  "P      
+M<,@C !E @X^8@8  "$B  $E0(1    2M6   #! %5 "@("$ 0" A ( 0(8^_
+M !R/L  8 ^  "">] #@          "0" _L    ,$.   P     ($ 50    
+M  /@  @     ) (#[     P0X  #      @0!5       ^  "     "/@H&8
+M ^  "     "OA(&8 ^  " " $"$          ">]_["OOP <#! &@*^D %"/
+MI !0KZ( )"0%5 @,$ :\)Z8 * 1!  <D @ !CZ0 ) P0!H,     $    @  
+M$"$D @ !C[\ '">] % #X  (                     #P#$ ",8PJ$) (#
+M^0"#("$    ,%.  !#P!$   8! A ^  "*PD"H0($ 50     #P"$ ",0@J 
+M      """"L0(  "      ! ("$D @/Y    #!3@__0\ 1  K"0*A /@  @ 
+M ! A           D @0>    #!#@  ,     "! %4      #X  (        
+M                   #X  (                                    
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M    (" @(" @(" @*"@H*"@@(" @(" @(" @(" @(" @("!($! 0$! 0$! 0
+M$! 0$! 0A(2$A(2$A(2$A! 0$! 0$!"!@8&!@8$! 0$! 0$! 0$! 0$! 0$!
+M 0$! 1 0$! 0$(*"@H*"@@(" @(" @(" @(" @(" @(" @("$! 0$"      
+M                                                            
+M                                                            
+M                                                 0(#! 4&!P@)
+M"@L,#0X/$!$2$Q05%A<8&1H;'!T>'R A(B,D)28G*"DJ*RPM+B\P,3(S-#4V
+M-S@Y.CL\/3X_0&%B8V1E9F=H:6IK;&UN;W!Q<G-T=79W>'EZ6UQ=7E]@04)#
+M1$5&1TA)2DM,34Y/4%%24U155E=865I[?'U^?P                      
+M                                                            
+M                                                            
+M                              !#2%)#3$%34P     O;&EB+V-H<F-L
+M87-S+P                                                      
+M                                                            
+M                                                            
+M         !  8"                                              
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M              $                    " 0       !  8!@0 & 8!@( 
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                               0 *= $ "G0   
+M        0&D                  $+(                            
+M             0   &%S8VEI                                    
+M                $  *=                                       
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M    < D""@  !D    +    P8               -   ,R    $Y   ]L   
+M           "$P  3%P   A,  !4J   !B0  %ST    '@  8Q@   !<  !K
+MB    (<  &SX,/ @X# 00-! T$ 0(*"! !9 \# 0$!%@P% A(! 0(04%!04%
+M!04%!04%!08',!$1(1$1(1$1(1$1(A,R$A(B$A(B$A(B$A(B%"$1$2$1$2$1
+M$2$1$2$1(1$1$2(B$P$!,-"   BP6(, "1$0,/ 4$A0F5! B)0&   Z __*!
+M  \2$P4PX#$7%!$8 !<2$1@!$1)08! 0$! 0$! 0$! 0$! 0$! P$! 0$! 0
+M$! 0$! 0$! 0$! P$" 0$!  $!$1$0 0$1$10/ A,A 2$8( "A 0$7$0(! @
+M$.! \($ "A(2,! @$!#0<! @$!#0<! @\# 0X(( #! 0$! 0$! 0(! 0$! 0
+M$)"   D0$-!R$! 0$" 0$-!0$!#0<A 0(! 0T(  $,! T$ 0$7$0$! @$" 0
+MX$#P@0 *$A(P$" 0$-!P$" 0$-!P$"#P,!#@@@ ,$! 0$! 0$! @$! 0$! 0
+MD(  "1 0T'(0$! 0(! 0T% 0$-!R$! @$!#0 ! 1$2$6%!(B!"<7%##0,- R
+MT#&$  H3,103 T#0010C$R 5$"$2$Q! X! @\!,",-!V$R8T)"#P(?!(!!@(
+M !@!" )2&  H 1(8 3(0(. @\!02$!#P$/!H" 81%#$8""@' D @X2#P$. H
+M!A@(!!@ $!#P$/ T 102$1$C(Q48&!@&) ) T#'02!#P,B@(-R 2\!#P$1#P
+M. $@$/ 8 !$3.  1%! 1 !)A</ %<)1PT#0PX1 @X# 10A 5&$#P$!<6(! 0
+M$B@A$Q% \!(0\!'P<1'P(A PX" W(Q%#\"81(B,1$4!"P$ 0D'(3$A @X$ B
+M$A @(. E& ) T'$S%3$"@  )@/_WA  +%1$5(. C$200%A<4$/ R%  0$1$1
+M ! 1$1%"0"$!0,!0\!0B$20A(/ @$2#P$2$3$" 0$1$1 ! 1$1$         
+M @               /____\              !@ '0      .    &<     
+M    :     0    :          #_____                 !T 'P   (( 
+M  "$    &@   '     &    '           _____P                 =
+M !\   "/    DP   !L   !\    "    !\          /____\         
+M        '0 ?    G@   *     >         "$               #_____
+M                 !T 'P   'D   !Y         !@    E    !@      
+M    _____P                 = !\   !Z    >@    $    P    *0  
+M  P          /____\                 '0 ?    >P   'L    "    
+M2    "T    2          #_____                 !T 'P   'T   !]
+M     P   &     Q    &           _____P                 = !\ 
+M  !^    ?@    0   !X    -0   !X          /____\             
+M    '0 ?    ?P   '\    %    D    #D    D          #_____    
+M             !T 'P   ($   "!    !@   *@    ]    *@          
+M_____P                 = !\   ""    @@    <   #     00   #  
+M         /____\                 '0 ?    @P   (,    (    V   
+M $4    V          #_____                 !T 'P   (4   "%    
+M"0   /    !)    /           _____P                 = !\   "&
+M    A@    H   $(    30   $(          /____\                 
+M'0 ?    AP   (<    +   !(    %$   !(          #_____        
+M         !T 'P   (D   ")    #    3P   !5    3P          ____
+M_P                 = !\   "*    B@    T   %<    A0   %<     
+M     /____\                 '0 ?    L@   /<    .          $ 
+M              #_____                 !T 'P    (    "        
+M       "     (    #___UL_____P             "L  = !\   !?    
+M@P               0    "     _____/____\              "  '0 ?
+M    '0   "X               $     @ ,  /____S_____            
+M   @ !T 'P   !X    F         (P    #    (P          _____P  
+M               = !\    S    .0    D          0              
+M /____\                 '0 ?    8@   )H               $     
+M          #_____                 !T 'P    X    2            
+M   !                _____P                 = !\    .    $@  
+M             0               /____\                 '0 ?    
+M*    2X               $               #_____                
+M !T 'P    X    3               #                _____P      
+M           = !\    7    '         !(    !0   !*  P  _____/__
+M__\              "  '0 ?    (0   "4    $          $     @ $ 
+M /____S_____               @ !T 'P   "H    ]         '@    #
+M    'H !  #____T_____P              *  = !\   !.    90    X 
+M  $X    !0   $Z  0  _____/____\              "  '0 ?    <@  
+M (D    B   "@     <   "@@ \  /___]S_____              !0 !T 
+M'P   )H   "Z    -0  !+     )   !+(    #____T_____P          
+M    (  = !\   #2    W@   %8   7(    "P   7*     _____/____\ 
+M             !@ '0 ?    Z@   /@   !K   &U     T   &U@    /__
+M__3_____               @ !T 'P   0,   $;    >   "#@    /   "
+M#@          _____P                 = !\   $I   !,    )4     
+M     0               /____\                 '0 ?    #@    \ 
+M              $               #_____                 !T 'P  
+M !$    >               &     (#_  #____<_____P              
+M6  = !\   !D    Q0        ,8    "    ,<          /____\     
+M            '0 ?    S    -L   !.   #6     H   #7@ $  /___^3_
+M____               X !T 'P   .8   $!    5          !        
+M        _____P                 = !\    .    $@              
+M 0               /____\                 '0 ?    #@   !(     
+M          $               #_____                 !T 'P   !\ 
+M   C          P    #     P          _____P                 =
+M !\    J    ,     $          0    "     ____S/____\         
+M     %  '0 ?    '@   "@               $               #_____
+M                 !T 'P   !<    ?         #     $    "P      
+M    _____P                 = !\    E    +P    @          0  
+M             /____\                 '0 ?    #@   !(         
+M 0     L(  +    #      (K___    %0!  < 8(  "    %0   &@@(  "
+M    '0!  B@8(  &    '0    @@(  $    *0!  C 8(  *    *0    P@
+M(  &    ,0!  CP8(  .    ,0    @@(  (     0     @(        0  
+M   L(  "     0     @(        0     L(  "     0     @(       
+M 0     L(  "     0     @(        0     L( "*    0@   !AI8  )
+M    2P     E8  (    60   ! E8  #    :    " E8  $    =0   $ E
+M8  %    @P   & E8  &    D@   ( E8  '           A8  !    H@  
+M !AI8  1    IP     E8  (    M0   ! E8  #    Q    " E8  $    
+MT0   $ E8  %    WP   & E8  &    [@   ( E8  '           A8  )
+M    _@    AM8  9   !!@     E8  (   !%      E8  #   !(P     E
+M8  $   !,      E8  %   !/@     E8  &   !30     E8  '        
+M   A8  1   !70    AM8  A   !8@     E8  (   !<      E8  #   !
+M?P     E8  $   !C      E8  %   !F@     E8  &   !J0     E8  '
+M           A8  9   !N0!  E 8( "'           <(  D          @@
+M(  B   !N0   !@@(  A   !Q0!  F@8( ")           <(  H        
+M  @@(  F   !Q0   !@@(  E   !V !  H 8( "+           <(  L    
+M      @@(  J   !V    !@@(  I   ![0!  I@8( "-           <(  P
+M          @@(  N   ![0   !@@(  M   !^@!  K 8( "/           <
+M(  T          @@(  R   !^@   !@@(  Q   "#@!  L@8( "1        
+M   <(  X          @@(  V   "#@   !@@(  U   ") !  N 8( "3    
+M       <(  \          @@(  Z   ")    !@@(  Y   "+P!  O@8( "5
+M           <( !           @@(  ^   "+P   !@@(  ]   "00!  Q 8
+M( "7           <( !$          @@( !"   "00   !@@( !!   "50! 
+M R@8( "9           <( !(          @@( !&   "50   !@@( !%   "
+M80!  T 8( ";           <( !,          @@( !*   "80   !@@( !)
+M   "= !  U@8( "=           <( !0          @@( !.   "=    !@@
+M( !-   "B0!  W 8( "?           <( !4          P@( !2   "B0  
+M !P@( !1   "E@!  XP8( "A           <( !8         ! @( !6   "
+ME@   " @( !5   "I    )AI8 !>   "J0     E8 "F   "K@   " E8 "I
+M   "MP   $ E8 "L           A8 !9   "O0   )!M8 !C   "Q0     E
+M8 #$   "R@     E8 #'   "TP     E8 #*           A8 !>   "V0  
+M  1Q8 !H   "W@     E8 #B   "X@    $E8 #C   "Z     (E8 #D    
+M       A8 !C   "[0    1Q8 !M   "]      E8 #K   "^P    $E8 #L
+M   # @    (E8 #M           A8 !H   #!P    1Q8 !Q   ##      E
+M8 #T   #$@    $E8 #U           A8 !M   #%P    1Q8 !U   #'   
+M   E8 #\   #(     $E8 #]           A8 !Q   #*     1Q8 !Y   #
+M+0     E8 $$   #,P    $E8 $%           A8 !U   #.      I8 $&
+M   #0     1Q8 !^   #1@     E8 $,   #3     $E8 $-           A
+M8 !Z   #40     I8 $.   #6@    1Q8 "%   #90    (E8 $4   #:0  
+M  $E8 $5   #;0     E8 $6   #<@    ,E8 $7           A8 !_   #
+M> !  ZP8( $8           <( "(         = @( "&   #>    > @( "%
+M     0     @(        0     L(  $    % ! !9 8(  -    %     @@
+M(  !     0     @(        0     L(  %    "1  "L )K___    % ! 
+M!: 8(  -    %    .P@(  "     0     @(        0     L(  $    
+M#@! !I 8(  -    #@   #0@(  !     0     @(        0     L(  &
+M    "@! !M 8(  -    "@   (P@(  !    $0! !UPX(  /    $0   '0@
+M(  #     0     @(        0     L(  )    #@! !] 8(  "    %0! 
+M"!@4+___    (@! "& 4+___    *0! "&@4+___    , ! "&P4+___    
+M-P! "' 4+___    #@   *@@(  !     0     @(        0     L(  %
+M    #0! "( 8(  "    $P! ")@4+___    #0   " @(  !     0     @
+M(        0     L(  "     0     @(        0     L(  "     0  
+M   @(        0     L(  %    #0! "* 8(  "    $P! "+@4+___    
+M#0   " @(  !     0     @(        0     L(  9    #0! ", 8(  "
+M    % ! "/ 4+___    'P! "0P4+___    ,0! "1@4+___    /P! "2P4
+M+___    0P! "304+___    40! "604+___    7 ! "7P4+___    9P! 
+M"9@4+___    < ! "9@4+___    ? ! "?04+___    B ! "C 4+___    
+MDP! "E04+___    GP! "G04+___    L@! "H@4+___    P ! "J04+___
+M    S@! "M04+___    V0! "NP4+___    Y ! "P@4+___    [@! "P@4
+M+___    ^P! "V04+___   !" ! "Z 4+___    #0   P0@(  !     0  
+M   @(        0     L(  %    #@! "] 8(  "    %0! "^@4+___    
+M#@   " @(  !     0     @(        0     L(  (    "A  "N )K___
+M    $Q   B (3___    '@! "_ 8(  -    '@   $@@(  #    )0! ##@8
+M(  /    )0   &@@(  %     0     @(        0     L(  2    "@! 
+M#* 8(  -    "@   '@@(  !    $P! #1@8(  /    $P   , @(  #    
+M&@! #=@8(  1    &@   4@@(  %    (0! #R 8(  3    (0   C @(  '
+M    *0! $5 8(  5    *0   1@@(  )    ,@! $F@8(  7    ,@   0P@
+M(  +    .@! $W08(  9    .@   60@(  -    0P! %-@8(  ;    0P  
+M % @(  /     0     @(        0     L(  $    # ! %3 8(  "    
+M#    ! @(  !     0     @(        0     L(  $    #@! %4 8(  "
+M    #@   ! @(  !     0     @(        0     L(  "     0     @
+M(        0     L(  "     0     @(        0     L(  -    "A  
+M"_ )S___    $1  "_@)S___    &!  "_P)S___    'Q  #  )S___    
+M)A  # 0)S___    +P! %5 8(  -    +P   Q@@(  &    -@! &&@8(  /
+M    -@   $ @(  (    .P! &*@8(  1    .P   1 @(  *     0     @
+M(        0     L(  %    #@! &< 8(  "    %0! &=@4+___    #@  
+M " @(  !     0     @(        0     L(  %    #@! &> 8(  "    
+M%0! &?@4+___    #@   " @(  !     0     @(        0     L(  &
+M    # ! &@ 8(  -    #     P@(  !    %0! &@P8(  /    %0    P@
+M(  #     0     @(        0     L(  $    "P! &B 8(  -    "P  
+M %0@(  !     0     @(        0     L(  (    #0! &H 8(  "    
+M#0   "@@(  !    $P! &J@4+___    %P! &K 8(  &    ' ! &LP4+___
+M    %P   #@@(  $     0     @(        0     L(  %    #@! &O 8
+M(  "    %0! &P@4+___    #@   " @(  !     0     @(        0  
+M   L(  "     0     @(   _____P         $     /____\         
+M!@    #_____          @     _____P         *           &    
+M @    0    &    "     H    +     P    4    '    "0   !H    #
+M #  __  !                0    @# #  __  !                0  
+M  @# #  __  !                0    @$ #  __  !               
+M 0   ! $ #  __  !                0   ! % #  __  !           
+M     0   ! & #  __  !                0   " & #  __  !       
+M         0   " ' #  __  !                0   " ( #  __  !   
+M             0   " ( #  __  !                0   " ) #  __  
+M!                0   " * #  __  !                0   " + #  
+M__  !                0   $ # !   P 0  , $  $ !  !  0  4 $  &
+M !  !@ 0  < $  ( !  "  0  D $  * !  "P 0  P   #__________PP 
+M  #_\  !      P   #__________PP   #_\  )      T   #_________
+M_PT   #_\  1      T   #__________PT   #_\  9         "4#    
+M    *0,        M P       #$$        -00        Y!0       #T&
+M        008       !%!P       $D(        30@       !1"0      
+M %4*        60L    ,    __________\, !  __  60     , !(0__  
+M60     , #,P__   0    #_\  $               "    P/_P  0     
+M          $   ) __  !                   !( , !  __  60     -
+M    __________\, !  __  60     , !(0__  60     , #,P__   0  
+M  #_\  $               "    P/_P  0               $   ) __  
+M!                   !( -    __  7@     .    __________\     
+M           .    __  8P     .    __________\                .
+M    __  :      .    __________\           X   #_\ !M      X 
+M  #__________P          #@   /_P '$     #@   /__________    
+M       .    __  =0     .    __________\           X   #_\ !Z
+M      X   #__________P                        ")!@         &
+M     @    0    &    "     H    +     P    4    '    "0   !H 
+M       #!@         &     @    0    &    "     H    +     P  
+M  4    '    "0   !H        $!@         &     @    0    &    
+M"     H    +     P    4    '    "0   !H        #!@         &
+M     @    0    &    "     H    +     P    4    '    "0   !H 
+M       # P 0      4# !  _____P         (     /____\         
+M!     #_____          0     _____P         8     /____\     
+M    !           !@    (    $    !@    @    *    "P    ,    %
+M    !P    D    :        !08        '&@         &     @    0 
+M   &    "     H    +     P    4    '    "0   !H        #&@  
+M      4&        !P8        )!@        L&        #08        /
+M!@       !$&    _____P         #     /____\          P      
+M    !@    (    $    !@    @    *    "P    ,    %    !P    D 
+M   :          8    "    !     8    (    "@    L    #    !0  
+M  <    )    &@         &     @    0    &    "     H    +    
+M P    4    '    "0   !H        (&@ 0      H:        #!H $ #_
+M____          0     _____P         $           &     @    0 
+M   &    "     H    +     P    4    '    "0   !H        #!@  
+M      4&          8    "    !     8    (    "@    L    #    
+M!0    <    )    &@        ,&    _____P         #     /____\ 
+M        !P    #_____          0      &-R=#%T97AT+G, 4U1!4E1&
+M4DT 7U]S=&%R= !?;6]N8V]N=')O; !?;6-O=6YT %]S<')O8VUO;G-T87)T
+M   O8F%B82]C>7!R97-S+W5S<B]I;F-L=61E+W)E9V1E9BYH   O8F%B82]C
+M>7!R97-S+W5S<B]I;F-L=61E+V%S;2YH  !C<G0Q=&EN:70N<P  9V1B;64N
+M8P \+S1$96)U9R\^ '!U<&EL.B]C>6=I;G0O<&QA>2]F;F8O9V1B;64N8P W
+M,#(S-#@S-CD -3,X-@!T7W-T<G5C= !V7V-H87)?;65M8F5R '9?<VAO<G1?
+M;65M8F5R '9?:6YT7VUE;6)E<@!V7VQO;F=?;65M8F5R '9?9FQO871?;65M
+M8F5R '9?9&]U8FQE7VUE;6)E<@ N1C$Q '9?8VAA<E]M96UB97( =E]S:&]R
+M=%]M96UB97( =E]I;G1?;65M8F5R '9?;&]N9U]M96UB97( =E]F;&]A=%]M
+M96UB97( =E]D;W5B;&5?;65M8F5R '1?=6YI;VX =E]C:&%R7VUE;6)E<@!V
+M7W-H;W)T7VUE;6)E<@!V7VEN=%]M96UB97( =E]L;VYG7VUE;6)E<@!V7V9L
+M;V%T7VUE;6)E<@!V7V1O=6)L95]M96UB97( +D8Q,P!V7V-H87)?;65M8F5R
+M '9?<VAO<G1?;65M8F5R '9?:6YT7VUE;6)E<@!V7VQO;F=?;65M8F5R '9?
+M9FQO871?;65M8F5R '9?9&]U8FQE7VUE;6)E<@!V7V-H87)?9G5N8P!V7W-I
+M9VYE9%]C:&%R7V9U;F, =E]U;G-I9VYE9%]C:&%R7V9U;F, =E]S:&]R=%]F
+M=6YC '9?<VEG;F5D7W-H;W)T7V9U;F, =E]U;G-I9VYE9%]S:&]R=%]F=6YC
+M '9?:6YT7V9U;F, =E]S:6=N961?:6YT7V9U;F, =E]U;G-I9VYE9%]I;G1?
+M9G5N8P!V7VQO;F=?9G5N8P!V7W-I9VYE9%]L;VYG7V9U;F, =E]U;G-I9VYE
+M9%]L;VYG7V9U;F, =E]F;&]A=%]F=6YC '9?9&]U8FQE7V9U;F, ;&EN:P!N
+M97AT &QI;FMF=6YC '-T=69F '1U7VQI;FL ;F5X= !L:6YK9G5N8P!S='5F
+M9@ N1C(Y ')E9 !G<F5E;@!B;'5E &-O;&]R<P!Y96QL;W< <'5R<&QE '!I
+M;FL +D8S,0!C:&5V>0!F;W)D &-A<G, 8FUW '!O<G-C:&4 +D8S,P!&04Q3
+M10!44E5% &)O;VQE86X 8G9A;', 9F%L<V4 =')U90!B;V]L96%N,@!M:7-O
+M<F1E<F5D '1W;P!O;F4 >F5R;P!T:')E90!M86EN  !G96XO<W1U8F9P97-T
+M87)T+F, 7U]R96%D96YV7W-I9V9P90  8W1Y<&4N8P!F:7)S=%]C86QL %]S
+M971C:')C;&%S<P  9V5N+V-U97AI="YC &5X:70  &=E=&5N=BYC &=E=&5N
+M=@!N=FUA=&-H  !G96XO<W1R8W!Y+G, <W1R8W!Y #$D,# P,# P,# P,  D
+M9&]C:#, )&1O8V@R "1D;V-H,0 D9&]C:#   '-Y<R]?;W!E;BYS %]O<&5N
+M #DD,# P,# P,# P,   +V)A8F$O8WEP<F5S<R]U<W(O:6YC;'5D92]S>7,N
+M<P  +V)A8F$O8WEP<F5S<R]U<W(O:6YC;'5D92]S>7,O<WES8V%L;"YH  !S
+M>7,O7W)E860N<P!?<F5A9  Y)# P,# P,# P,#   &=E;B]B8V]P>2YS &UE
+M;6-P>0!G;V9O<G=A<F1S &9O<G=A<F1S7V)Y=&5C;W!Y #DY)# P,# P,# P
+M,#  <F5T &9O<G=A;&EG;F%B;&4 9F]R=U]C;W!Y,@!F;W)W7V-O<'DS &9O
+M<G=A<F1S &9O<G=A<F1S7S,R &9O<G=A<F1S7S$V &9O<G=A<F1S7S0 9V]B
+M86-K=V%R9', 8F%C:W=A<F1S7V)Y=&5C;W!Y #DY)# P,# P,# P,#$ 8F%C
+M:V%L:6=N86)L90!B86-K7V-O<'DR &)A8VM?8V]P>3, 8F%C:W=A<F1S &)A
+M8VMW87)D<U\S,@!B86-K=V%R9'-?,38 8F%C:W=A<F1S7S0  '-Y<R]?8VQO
+M<V4N<P!?8VQO<V4 .20P,# P,# P,# P  !A=&5X:70N8P!?7VYE>'1F;@!?
+M7V5X:71?9FYS &%T97AI= !?7V-A;&Q?97AI=&9N<P  9FQS8G5F+F, 7V-L
+M96%N=7  9F-L;W-E &9F;'5S: !?9FQS8G5F %]X9FQS8G5F %]W<G1C:&L 
+M7V9I;F1B=68 7V)U9G-Y;F,  '-Y<R]E>&ET+G, 7V5X:70  &-R="]C97)R
+M;W(N<P!?8V5R<F]R  !D871A+F,  &UP7V1E9BYC  !M86QL;V,N8P!A;&QO
+M8W, 86QL;V-P &%L;&]C= !A;&QO8W@ 86QL;V-E;F0 ;6%L;&]C &9R964 
+M<F5A;&QO8P  <WES+U]L<V5E:RYS %]L<V5E:P Y)# P,# P,# P,#   '-Y
+M<R]?=W)I=&4N<P!?=W)I=&4 .20P,# P,# P,# P  !?;W-E<G)O<BYC %]O
+M<V5R<F]R %]S971O<V5R<F]R  !?:7-A='1Y+F, 7VES871T>0  <WES+U]S
+M8G)K+G, 7W-B<FL 97)R %]B<FL ,20P,# P,# P,# P  !S>7,O7VEO8W1L
+M+G, 7VEO8W1L #DD,# P,# P,# P,   8W)T;FEN:70N<P  7V5N=FER;VX 
+M96YV:7)O;@!?7T%R9V, 7U]!<F=V &5R<FYO %]?<W1A<G0 7V=P %]?:7-T
+M87)T %]?<F5A9&5N=E]S:6=F<&4 7W-E=&-H<F-L87-S &UA:6X 97AI= !?
+M;6]N8V]N=')O; !?;6-O=6YT %]S<')O8VUO;G-T87)T '9?8VAA<@!V7W-I
+M9VYE9%]C:&%R '9?=6YS:6=N961?8VAA<@!V7W-H;W)T '9?<VEG;F5D7W-H
+M;W)T '9?=6YS:6=N961?<VAO<G0 =E]I;G0 =E]S:6=N961?:6YT '9?=6YS
+M:6=N961?:6YT '9?;&]N9P!V7W-I9VYE9%]L;VYG '9?=6YS:6=N961?;&]N
+M9P!V7V9L;V%T '9?9&]U8FQE '9?8VAA<E]A<G)A>0!V7W-I9VYE9%]C:&%R
+M7V%R<F%Y '9?=6YS:6=N961?8VAA<E]A<G)A>0!V7W-H;W)T7V%R<F%Y '9?
+M<VEG;F5D7W-H;W)T7V%R<F%Y '9?=6YS:6=N961?<VAO<G1?87)R87D =E]I
+M;G1?87)R87D =E]S:6=N961?:6YT7V%R<F%Y '9?=6YS:6=N961?:6YT7V%R
+M<F%Y '9?;&]N9U]A<G)A>0!V7W-I9VYE9%]L;VYG7V%R<F%Y '9?=6YS:6=N
+M961?;&]N9U]A<G)A>0!V7V9L;V%T7V%R<F%Y '9?9&]U8FQE7V%R<F%Y '9?
+M8VAA<E]P;VEN=&5R '9?<VEG;F5D7V-H87)?<&]I;G1E<@!V7W5N<VEG;F5D
+M7V-H87)?<&]I;G1E<@!V7W-H;W)T7W!O:6YT97( =E]S:6=N961?<VAO<G1?
+M<&]I;G1E<@!V7W5N<VEG;F5D7W-H;W)T7W!O:6YT97( =E]I;G1?<&]I;G1E
+M<@!V7W-I9VYE9%]I;G1?<&]I;G1E<@!V7W5N<VEG;F5D7VEN=%]P;VEN=&5R
+M '9?;&]N9U]P;VEN=&5R '9?<VEG;F5D7VQO;F=?<&]I;G1E<@!V7W5N<VEG
+M;F5D7VQO;F=?<&]I;G1E<@!V7V9L;V%T7W!O:6YT97( =E]D;W5B;&5?<&]I
+M;G1E<@!V7W-T<G5C=#$ =E]S=')U8W0R '9?=6YI;VX =E]U;FEO;C( =E]C
+M:&%R7V9U;F, =E]S:6=N961?8VAA<E]F=6YC '9?=6YS:6=N961?8VAA<E]F
+M=6YC '9?<VAO<G1?9G5N8P!V7W-I9VYE9%]S:&]R=%]F=6YC '9?=6YS:6=N
+M961?<VAO<G1?9G5N8P!V7VEN=%]F=6YC '9?<VEG;F5D7VEN=%]F=6YC '9?
+M=6YS:6=N961?:6YT7V9U;F, =E]L;VYG7V9U;F, =E]S:6=N961?;&]N9U]F
+M=6YC '9?=6YS:6=N961?;&]N9U]F=6YC '9?9FQO871?9G5N8P!V7V1O=6)L
+M95]F=6YC '-?;&EN:P!U7VQI;FL <')I;6%R>0!N;VYP<FEM87)Y &-L=6YK
+M97( <W!O<G1S8V%R %]C='EP90!G971E;G8 <W1R8W!Y %]O<&5N %]R96%D
+M &UE;6-P>0!?8VQO<V4 7U]T<F%P7V9P95]O=F5R<FED90!?7V-A;&Q?97AI
+M=&9N<P!?8VQE86YU< !?97AI= !?8V5R<F]R &%T97AI= !?8G5F96YD=&%B
+M %]I;V( 7W-P<F]C960 7VQA<W1B=68 7W-I8G5F %]S;V)U9@!?<VUB=68 
+M9F9L=7-H &9C;&]S90!F<F5E %]L<V5E:P!?>&9L<V)U9@!?9FQS8G5F %]W
+M<FET90!?=W)T8VAK %]B=69S>6YC %]S971O<V5R<F]R %]F:6YD8G5F &UA
+M;&QO8P!?:7-A='1Y %]L;V-K %]U;&]C:P!?;FQO8VL 7VEL;V-K %]F;&]C
+M:P!?=VQO8VL 7V-L;V-K %]T;&]C:P!?8W1L;V-K %]D;&]C:P!?8V%S %]U
+M<U]R<W1H<F5A9%]S=&1I;P!?<V)R:P!?8G)K ')E86QL;V, 7V]S97)R;W( 
+M7VEO8W1L &5N9 !?;6EN8G)K %]C=7)B<FL 7V5N9    $ !P     $     
+M    0          +         "$               0         $       
+M   %&8             ? $ !P     $   !     )     L    "        
+M               $       0          4    %'8               $ !
+MP     $   !D    (0    T    "                       $       0
+M          H    %'8               $ !P     $   "%    #0    \ 
+M   "                                          \    !'8      
+M         $ "4     $   "2   #?0   !$   "*    (0   ,\         
+M   $  \    0   !&@   !     ! 0       !\    _ $ %D     $   0/
+M    )0   )L    $    \     (            3  $   $J    #P   !$ 
+M   ! 8       %X    ! $ %H     $   0T    (0   )\    %    \@  
+M #L            4  $   $Y    #P   !(    ! 8       %\    7 $ &
+MD     $   15    $P   *0    $   !+0    T            5  $   %(
+M    #P   !,    ! 8       '8    , $ &T     $   1H    &0   *@ 
+M   &   !.@   $             6  (   %7    $0   !0    ! 8      
+M ((    0 $ 'T     $   2!    /@   *X    )   !>@   "H         
+M   8  $   %H    !    !4    %&8       )(    J $ (@     $   2_
+M    (    +<    %   !I     @            9  $   %L    !    !H 
+M   %&8       +P    % $ (@     $   3?    (0   +P    "        
+M               !       $         !\    %'8               $ (
+M@     $   4     *0   +X    "                       !       $
+M         "0    %'8               $ (H     $   4I    (    ,  
+M   %   !K     @            :  $   %P    !    "D    %&8      
+M ,$    % $ (P     $   5)   !%    ,4    9   !M    ,8         
+M   ;  $   %T    !    "X    %&8       ,8   "T $ +T     $   9=
+M    (@   -X    %   ">@    @            <  $   %X    !    #, 
+M   %&8       7H    % $ +\     $   9_    -    .,    (   "@@  
+M "P            =  (   %\    $0   #@    ! 8       7\    ( $ ,
+MH     $   :S    3    .L    2   "K@   B(            ?  @   &-
+M    '0   #D    ! 8       8<   "; $ 5,     $   ;_    $@   /T 
+M   $   $T     0            G  $   &J    !    #H    %&8      
+M B(    " $ 50     $   <1    %@   0$    $   $U     0         
+M   H  $   &N    !    #\    #&8       B0    # $ 54     $   <G
+M    "    04    "                              &R    #0   $( 
+M   ! 8               $ 54     $   <O    "@   0<    "        
+M                      &_    #0   $,    ! 8               $ 5
+M4     $   <Y    0P   0D    -   $V    1L            I  ,   ',
+M    $P   $0    ! 8       B<   !N $ 9P     $   =\    (@   18 
+M   %   %\P    @            L  $   '?    !    $4    %&8      
+M I4    % $ 9X     $   >>    (@   1L    %   %^P    @         
+M   M  $   'C    !    $H    %&8       IH    % $ :      $   ? 
+M    (0   2     &   & P    8            N  (   'G    $0   $\ 
+M   ! 8       I\    # $ :(     $   ?A    $P   28    $   &"0  
+M !4            P  $   'X    #P   %     ! 8       J(    ) $ :
+M@     $   ?T    *0   2H    (   &'@   !H            Q  (   ('
+M    "    %$    %&8       JL    0 $ :\     $   @=    (@   3( 
+M   %   &.     @            S  $   (/    !    %8    %&8      
+M KL    %$$ ;$     $   @_    #    3<    "                    
+M                     %L    !'8                        $    !
+M     @    (          0    $    "     @         !     0    ( 
+M   "     P    0    %    !@    <    (    "0    (    "     0  
+M  $    *     0    (    +    #     H    !     @    L    ,    
+M"@    $    "    "P    P    -     0    (    +    #     X    "
+M     @    $    !    #P    $    "    "P    P    0    $0   !( 
+M   !     @    L    ,    $P    $    "    %    !4    6    %P  
+M  $    "    "P    P    8     0    (    +    #    !D    :    
+M&P    $    "    "P    P    <     0    (    +    #    !T     
+M     !  "K %K___          D0  JP!:___P         1$  ,$ 7/__\ 
+M        &!  #!0%S___         !\0  P8!<___P         E $ !P!@@
+M  (         +1  BH 4K___     P   #$ 0!L<%L___P    4    Z $ %
+MD!@@  $    &    2P! !: 8(  "    !    %@ 0 .L&"  A0    <   !=
+M $ &D!@@  $         8@!  B@8(  $         &X 0 (P&"  !@      
+M  !V $ "/!@@  @    $    A1  "Q %P  (    !    (P0  L1!<  "   
+M  0   ":$  +$@7   @    $    JA  "Q0%P  #    !    +(0  L6!<  
+M P    0   #!$  +& 7   D    $    TA  "QP%P  $    !    -@0  L@
+M!<  !     0   #E$  +) 7   H    $    ]!  "R@%P  %    !    /L0
+M  LL!<  !0    0   $)$  +, 7   L    $   !&1  "S0%P  &    !   
+M 2$0  LX!<  !P    0   $J$  +0 7   T    $   !-Q  "T(%P  3    
+M!    4L0  M$!<  &0    0   %A$  +2 7  !\    $   !;Q  "TP%P  E
+M    !    800  M0!<  *P    0   &;$  +6 7  #$    $   !IQ  "V %
+MP  W    !    ;H0  MH!<  /0    0   '/$  +< 7  $,    $   !W!  
+M"W@%P !)    !    ? 0  N !<  3P    0   (&$  +B 7  %4    $   "
+M%!  8_ $8 !;    !    B,0  N0!<  80    0   (R$  +E 7  &(    $
+M   "2!  "Y@%P !C    !    F 0  N<!<  9     0   )P$  +H 7  &4 
+M   $   "AQ  "Z0%P !F    !    J 0  NH!<  9P    0   *N$  +K 7 
+M &@    $   "PQ  "[ %P !I    !    MH0  NT!<  :@    0   +I$  +
+MN 7  &L    $   "_Q  "[P%P !L    !    Q<0  O !<  ;0    0   ,G
+M$  +Q 7  &X    $   #.!  8\ $8 !R    !    T(0 &/8!&  >     0 
+M  -,$  +R 7  'X    $   #5!  "] %P "$    !    UT 0 )0&"  (0  
+M  0   -I $ ":!@@ "4    $   #? !  H 8(  I    !    Y$ 0 *8&"  
+M+0    0   .> $ "L!@@ #$    $   #L@!  L@8(  U    !    \@ 0 +@
+M&"  .0    0   /3 $ "^!@@ #T    $   #Y0!  Q 8( !!    !    _D 
+M0 ,H&"  10    0   0% $ #0!@@ $D    $   $& !  U@8( !-    !   
+M!"T 0 -P&"  40    0   0Z $ #C!@@ %4    $   $2!  "]@%P "^    
+M!   !$\0 &,P!&  W     0   16$  +W 7  .4    $   $7A  "^ %P #N
+M    !   !&D0  OD!<  ]@    0   1Q$  +Z 7  /X    &   $>Q     $
+M3___    "   !(( 0 ;0&"   0    D   2) $ 'T!@@  $    *   $D ! 
+M"( 8(  !    #0  !)8 0 B@&"   0    X   2< $ (P!@@  $    /   $
+MHP! "] 8(  !    !P  !*H0  K0!:___P   !    2^ $ ,.!@@  4    1
+M   $S0! #* 8(  !    $@  !-8 0!4P&"   0   !,   3< $ 50!@@  $ 
+M   0   $Y ! "_ 8(  #    %   !.L0  *@!$___P   !0   3V$  $- 1/
+M__\    5   $^Q  "P %K___    %   !000  KP!:___P   !0   4-$  0
+M  1O__\    4   %%!  0  $;___    %   !1L0 & (!&___P   !$   4B
+M $ -V!@@  4    1   %*0! #1@8(  #    %@  !3  0!AH&"  "    !< 
+M  4U $ 9P!@@  $    1   %/ ! $5 8(  )    $0  !44 0 \@&"  !P  
+M !@   5- $ 9X!@@  $    1   %5 ! $F@8(  +    $0  !5P 0!38&"  
+M#P   !D   5E $ :#!@@  ,    1   %<0! $W08(  -    %@  !7H 0!50
+M&"  !@   !H   6! $ :(!@@  $    5   %B1  #!P%S___    %0  !8\0
+M  P@!<___P   !4   66$  ,) 7/__\    5   %G1  #"@%S___    %0  
+M!:00  PL!<___P   !4   6K$  ,, 7/__\    5   %LA  ##0%S___    
+M%0  !;D0  PX!<___P   !4   7 $  ,/ 7/__\    5   %R!  #$ %S___
+M    %0  !<\0  Q$!<___P   !4   74$  +! 6O__\    ;   %YP! &H 8
+M(  !    &P  !>T 0!JP&"  !    !8   7R $ 8J!@@  H    9   %^@! 
+M&@ 8(  !    '   !@, 0!KP&"   0   !L   8*$ "G0!1O__\    ;   &
+I#A  "H $3___    &P  !A80  J$!$___P  __\   8>$ "G0!1O__\;
+ 
+end
diff --git a/gdb/testsuite/gdb.base/mips_pro.c b/gdb/testsuite/gdb.base/mips_pro.c
new file mode 100644
index 0000000..d2d1884
--- /dev/null
+++ b/gdb/testsuite/gdb.base/mips_pro.c
@@ -0,0 +1,35 @@
+/* Tests regarding examination of prologues.  */
+
+int
+inner (z)
+     int z;
+{
+  return 2 * z;
+}
+
+int
+middle (x)
+     int x;
+{
+  if (x == 0)
+    return inner (5);
+  else
+    return inner (6);
+}
+
+int
+top (y)
+     int y;
+{
+  return middle (y + 1);
+}
+
+int
+main (argc, argv)
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  return top (-1) + top (1);
+}
diff --git a/gdb/testsuite/gdb.base/mips_pro.exp b/gdb/testsuite/gdb.base/mips_pro.exp
new file mode 100644
index 0000000..ea2461e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/mips_pro.exp
@@ -0,0 +1,62 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile mips_pro
+set srcfile ${srcdir}/$subdir/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+
+# This test must be compiled with -O2 if using gcc.
+
+if {$gcc_compiled} then {
+    if  { [gdb_compile "${srcfile}" "${binfile}" executable {debug additional_flags=-O2}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+} else {
+    if  { [gdb_compile "${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if [runto middle] then {
+    # PR 3016
+    if {$gcc_compiled} then { 
+	setup_xfail "hppa*-*-*" "mips*-sgi-irix4*" "mips64*-*-elf"
+    }
+    gdb_test "backtrace" "#0.*middle.*#1.*top.*#2.*main.*"
+}
+return 0
diff --git a/gdb/testsuite/gdb.base/miscexprs.c b/gdb/testsuite/gdb.base/miscexprs.c
new file mode 100644
index 0000000..cae23d8
--- /dev/null
+++ b/gdb/testsuite/gdb.base/miscexprs.c
@@ -0,0 +1,165 @@
+void marker1 ()
+{
+    
+}
+/*
+static struct {
+    char c[100];
+} cbig;
+
+
+static struct {
+    int i[800];
+} ibig;
+
+
+static struct {
+    long l[900];
+} lbig;
+
+static struct {
+    float f[200];
+} fbig;
+
+static struct {
+    double d[300];
+} dbig;
+
+static struct {
+    short s[400];
+} sbig;*/
+
+/*struct {
+    long l[900];
+} lbig;*/
+
+int main()
+{
+
+struct {
+    char c[100];
+} cbig;
+
+
+struct {
+    int i[800];
+} ibig;
+
+
+struct {
+    long l[900];
+} lbig;
+
+struct {
+    float f[200];
+} fbig;
+
+struct {
+    double d[300];
+} dbig;
+
+struct {
+    short s[400];
+} sbig; 
+    ibig.i[100] = 5;
+    cbig.c[100] = 'A';
+    fbig.f[100] = 11.99999;
+    dbig.d[202] = 9.99999999;
+    sbig.s[90] = 255;
+    lbig.l[333] = 999999999;
+    
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+    marker1();
+    return 0;
+
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/miscexprs.exp b/gdb/testsuite/gdb.base/miscexprs.exp
new file mode 100644
index 0000000..9ea278a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/miscexprs.exp
@@ -0,0 +1,283 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+# This file is part of the gdb testsuite
+# file written by Elena Zannoni (ezannoni@cygnus.com)
+
+#
+# tests for expressions with struct/array elements and mixed operator types
+# with elementary types
+# 
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "miscexprs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+global hex
+
+send_gdb "print &ibig.i\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(int \\*\\) $hex.*$gdb_prompt $" {
+        pass "print value of &ibig.i\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &ibig.i\[0\]" }
+    timeout           { fail "(timeout) print value of &ibig.i\[0\]" }
+  }
+
+send_gdb "print &cbig.c\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = $hex \"\".*$gdb_prompt $" {
+        pass "print value of &cbig.c\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &cbig.c\[0\]" }
+    timeout           { fail "(timeout) print value of &cbig.c\[0\]" }
+  }
+
+send_gdb "print &fbig.f\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(float \\*\\) $hex.*$gdb_prompt $" {
+        pass "print value of &fbig.f\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &fbig.f\[0\]" }
+    timeout           { fail "(timeout) print value of &fbig.f\[0\]" }
+  }
+
+send_gdb "print &dbig.d\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(double \\*\\) $hex.*$gdb_prompt $" {
+        pass "print value of &dbig.d\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &dbig.d\[0\]" }
+    timeout           { fail "(timeout) print value of &dbig.d\[0\]" }
+  }
+
+send_gdb "print &sbig.s\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(short int \\*\\) $hex.*$gdb_prompt $" {
+        pass "print value of &sbig.s\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &sbig.s\[0\]" }
+    timeout           { fail "(timeout) print value of &sbig.s\[0\]" }
+  }
+
+send_gdb "print &lbig.l\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(long int \\*\\) $hex.*$gdb_prompt $" {
+        pass "print value of &lbig.l\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of &lbig.l\[0\]" }
+    timeout           { fail "(timeout) print value of &lbig.l\[0\]" }
+  }
+
+
+send_gdb "print ibig.i\[100\] | 1\n"
+gdb_expect {
+    -re ".\[0-9\]* = 5.*$gdb_prompt $" {
+        pass "print value of ibig.i\[100\] | 1"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ibig.i\[100\] | 1" }
+    timeout           { fail "(timeout) print value of ibig.i\[100\] | 1" }
+  }
+
+
+send_gdb "print sbig.s\[90\] & 127\n"
+gdb_expect {
+    -re ".\[0-9\]* = 127.*$gdb_prompt $" {
+        pass "print value of sbig.s\[90\] & 127"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of sbig.s\[90\] & 127" }
+    timeout           { fail "(timeout) print value of sbig.s\[90\] & 127" }
+  }
+
+send_gdb "print !ibig.i\[100\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !ibig.i\[100\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !ibig.i\[100\]" }
+    timeout           { fail "(timeout) print value of !ibig.i\[100\]" }
+  }
+
+send_gdb "print !sbig.s\[90\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !sbig.s\[90\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !sbig.s\[90\]" }
+    timeout           { fail "(timeout) print value of !sbig.s\[90\]" }
+  }
+
+
+send_gdb "print !fbig.f\[100\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !ibig.i\[100\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !ibig.i\[100\]" }
+    timeout           { fail "(timeout) print value of !ibig.i\[100\]" }
+  }
+
+send_gdb "print !dbig.d\[202\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !ibig.i\[100\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !ibig.i\[100\]" }
+    timeout           { fail "(timeout) print value of !ibig.i\[100\]" }
+  }
+
+
+
+send_gdb "print sbig.s\[90\] * 10\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2550.*$gdb_prompt $" {
+        pass "print value of !sbig.s\[90\] * 10"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !sbig.s\[90\] * 10" }
+    timeout           { fail "(timeout) print value of !sbig.s\[90\] * 10" }
+  }
+
+send_gdb "print ibig.i\[100\] * sbig.s\[90\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1275.*$gdb_prompt $" {
+        pass "print value of ibig.i\[100\] * sbig.s\[90\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ibig.i\[100\] * sbig.s\[90\]" }
+    timeout           { fail "(timeout) print value of ibig.i\[100\] * sbig.s\[90\]" }
+  }
+
+send_gdb "print fbig.f\[100\] * dbig.d\[202\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 119.99\[0-9\]*.*$gdb_prompt $" {
+        pass "print value of fbig.f\[100\] * dbig.d\[202\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of fbig.f\[100\] * dbig.d\[202\]" }
+    timeout           { fail "(timeout) print value of fbig.f\[100\] * dbig.d\[202\]" }
+  }
+
+send_gdb "print !(sbig.s\[90\] * 2)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of !(sbig.s\[90\] * 2)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of !(sbig.s\[90\] * 2)" }
+    timeout           { fail "(timeout) print value of !(sbig.s\[90\] * 2)" }
+  }
+
+
+send_gdb "print sizeof(sbig)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 800.*$gdb_prompt $" {
+        pass "print value of sizeof(sbig)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of sizeof(sbig)" }
+    timeout           { fail "(timeout) print value of sizeof(sbig)" }
+  }
+
+
+send_gdb "print sizeof(cbig)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 100.*$gdb_prompt $" {
+        pass "print value of sizeof(cbig)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of sizeof(cbig)" }
+    timeout           { fail "(timeout) print value of sizeof(cbig)" }
+  }
+
+
+send_gdb "print sizeof(lbig)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3600.*$gdb_prompt $" {
+        pass "print value of sizeof(lbig)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of sizeof(lbig)" }
+    timeout           { fail "(timeout) print value of sizeof(lbig)" }
+  }
+
+send_gdb "print ibig.i\[100\] << 2\n"
+gdb_expect {
+    -re ".\[0-9\]* = 20.*$gdb_prompt $" {
+        pass "print value of ibig.i\[100\] << 2"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ibig.i\[100\] << 2" }
+    timeout           { fail "(timeout) print value of ibig.i\[100\] << 2" }
+  }
+
+send_gdb "print sbig.s\[90\] >> 4\n"
+gdb_expect {
+    -re ".\[0-9\]* = 15.*$gdb_prompt $" {
+        pass "print value of sbig.s\[90\] >> 4"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of sbig.s\[90\] >> 4" }
+    timeout           { fail "(timeout) print value of sbig.s\[90\] >> 4" }
+  }
+
+send_gdb "print lbig.l\[333\] >> 6\n"
+gdb_expect {
+    -re ".\[0-9\]* = 15624999.*$gdb_prompt $" {
+        pass "print value of lbig.l\[333\] >> 6"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of lbig.l\[333\] >> 6" }
+    timeout           { fail "(timeout) print value of lbig.l\[333\] >> 6" }
+  }
diff --git a/gdb/testsuite/gdb.base/nodebug.c b/gdb/testsuite/gdb.base/nodebug.c
new file mode 100644
index 0000000..4aad099
--- /dev/null
+++ b/gdb/testsuite/gdb.base/nodebug.c
@@ -0,0 +1,58 @@
+/* Test that things still (sort of) work when compiled without -g.  */
+
+int dataglobal = 3;			/* Should go in global data */
+static int datalocal = 4;		/* Should go in local data */
+int bssglobal;				/* Should go in global bss */
+static int bsslocal;			/* Should go in local bss */
+
+int
+inner (x)
+     int x;
+{
+  return x + dataglobal + datalocal + bssglobal + bsslocal;
+}
+
+static short
+middle (x)
+     int x;
+{
+  return 2 * inner (x);
+}
+
+short
+top (x)
+     int x;
+{
+  return 2 * middle (x);
+}
+
+int 
+main (argc, argv)
+     int argc;
+     char **argv;
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  return top (argc);
+}
+
+char *malloc ();
+
+int *x;
+
+int
+array_index (arr, i)
+     char *arr;
+     int i;
+{
+  /* The basic concept is just "return arr[i];".  But call malloc so that gdb
+     will be able to call functions.  */
+  char retval;
+  x = (int *) malloc (sizeof (int));
+  *x = i;
+  retval = arr[*x];
+  free (x);
+  return retval;
+}
diff --git a/gdb/testsuite/gdb.base/nodebug.exp b/gdb/testsuite/gdb.base/nodebug.exp
new file mode 100644
index 0000000..e4f8a35
--- /dev/null
+++ b/gdb/testsuite/gdb.base/nodebug.exp
@@ -0,0 +1,163 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Test that things still (sort of) work when compiled without -g.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile nodebug
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable ""] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+source ${binfile}.ci
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+if [runto inner] then {
+    
+    # Expect to find global/local symbols in each of text/data/bss.
+    
+    # The exact format for some of this output is not necessarily
+    # ideal, particularly interpreting "p top" requires a fair bit of
+    # savvy about gdb's workings and the meaning of the "{}"
+    # construct.  So the details maybe could be tweaked.  But the
+    # basic purpose should be maintained, which is (a) users should be
+    # able to interact with these variables with some care (they have
+    # to know how to interpret them according to their real type,
+    # since gdb doesn't know the type), but (b) users should be able
+    # to detect that gdb does not know the type, rather than just
+    # being told they are ints or functions returning int like old
+    # versions of gdb used to do.
+    
+    # On alpha (and other ecoff systems) the native compilers put
+    # out debugging info for non-aggregate return values of functions
+    # even without -g, which should be accepted.
+    # Irix5, even though it is ELF, counts as "ecoff" because it
+    # encapsulates ecoff debugging info in a .mdebug section.
+    # Irix6 gcc omits no debug info at all for static functions and
+    # variables, so all tests involving statics fail.
+    
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix5*" "mips-sgi-irix6*" }
+    gdb_test "p top" \
+	"{(<(text variable|function), no debug info>|short \\(\\))} \[0-9a-fx]* <top>"
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix5*" "mips-sgi-irix6*" }
+    gdb_test "whatis top" \
+	"(<(text variable|function), no debug info>|short \\(\\))"
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "ptype top" "(short|int) \\((|<non-float parameter>|<non-float parameter>, <non-float parameter>)\\)"
+    
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix5*" }
+    setup_xfail "mips-sgi-irix6*"
+    gdb_test "p middle" \
+	"{(<(text variable|function), no debug info>|short \\(\\))} \[0-9a-fx]* <middle>"
+    if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix5*" }
+    setup_xfail "mips-sgi-irix6*"
+    gdb_test "whatis middle" \
+	"(<(text variable|function), no debug info>|short \\(\\))"
+    setup_xfail "mips-sgi-irix6*"
+    gdb_test "ptype middle" "(short|int) \\((|<non-float parameter>|<non-float parameter>, <non-float parameter>)\\)"
+    
+    gdb_test "p dataglobal" "= 3"
+    gdb_test "whatis dataglobal" \
+	"<(data variable|variable), no debug info>"
+    gdb_test "ptype dataglobal" "<(data variable|variable), no debug info>"
+    
+    # The only symbol xcoff puts out for statics is for the TOC entry.
+    # Possible, but hairy, for gdb to deal.  Right now it doesn't, it
+    # doesn't know the variables exist at all.
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "p datalocal" "= 4"
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "whatis datalocal" "<(data variable|variable), no debug info>"
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "ptype datalocal" "<(data variable|variable), no debug info>"
+    
+    gdb_test "p bssglobal" "= 0"
+    gdb_test "whatis bssglobal" "<(data variable|variable), no debug info>"
+    gdb_test "ptype bssglobal" "<(data variable|variable), no debug info>"
+    
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "p bsslocal" "= 0"
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "whatis bsslocal" "<(data variable|variable), no debug info>"
+    setup_xfail "rs6000*-*-aix*"
+    setup_xfail "powerpc*-*-aix*"
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "ptype bsslocal" "<(data variable|variable), no debug info>"
+    
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    gdb_test "backtrace 10" "#0.*inner.*#1.*middle.*#2.*top.*#3.*main.*" \
+	"backtrace from inner in nodebug.exp"
+    # Or if that doesn't work, at least hope for the external symbols
+    # Commented out because if we aren't going to xfail the above test
+    # ever, why bother with a weaker test?
+    #gdb_test "backtrace 10" "#0.*inner.*#1.*#2.*top.*#3.*main.*" \
+	#    "backtrace from inner in nodebug.exp for externals"
+    
+    # This test is not as obscure as it might look.  `p getenv ("TERM")'
+    # is a real-world example, at least on many systems.
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" "mips-sgi-irix6*" }
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "p/c array_index(\"abcdef\",2)"
+    } else {
+	gdb_test {p/c array_index("abcdef",2)} " = 99 'c'"
+    }
+    
+    # Now, try that we can give names of file-local symbols which happen
+    # to be unique, and have it still work
+    if {$gcc_compiled} then { setup_xfail "mips-sgi-irix6*" }
+    if [runto middle] then {
+	gdb_test "backtrace 10" "#0.*middle.*#1.*top.*#2.*main.*" \
+	    "backtrace from middle in nodebug.exp"
+    }
+}
diff --git a/gdb/testsuite/gdb.base/opaque.exp b/gdb/testsuite/gdb.base/opaque.exp
new file mode 100644
index 0000000..92e6459
--- /dev/null
+++ b/gdb/testsuite/gdb.base/opaque.exp
@@ -0,0 +1,244 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "opaque"
+set binfile ${objdir}/${subdir}/opaque
+
+#if  { [gdb_compile "${srcdir}/${subdir}/opaque0.c ${srcdir}/${subdir}/opaque1.c" "${binfile}" executable {debug}] != "" } {
+#     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/opaque0.c" "${binfile}0.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/opaque1.c" "${binfile}1.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# Test basic opaque structure handling (statically).
+# The ordering of the tests is significant.  We first try the things that
+# might fail if gdb fails to connect the uses of opaque structures to
+# the actual opaque structure definition.
+
+# When we start up, gdb sets the file containing main() as the current
+# source file.  The actual structure foo is defined in a different file.
+# A pointer (foop) to an instance of the opaque struct is defined in the same
+# source file as main().  Ensure that gdb correctly "connected" the definition
+# in the other file with the pointer to the opaque struct in the file containing
+# "foop".
+
+# Define a procedure to set up an xfail for all targets that do not support
+# this sort of cross reference.
+# Any target gcc that has a DBX_NO_XREFS definition in its config file will
+# not support it (FIXME: Is this still true; I suspect maybe not).
+
+# Native alpha ecoff doesn't support it either.
+# I don't think this type of cross reference works for any COFF target
+# either.
+
+proc setup_xfail_on_opaque_pointer {} {
+	global gcc_compiled
+
+	setup_xfail "a29k-*-udi" "vax-*-*" "i*86-sequent-bsd*"
+	if {!$gcc_compiled} then {
+		setup_xfail "alpha-*-*" "mips-sgi-irix5*"
+	}
+}
+
+# This seems easier than trying to track different versions of xlc; I'm
+# not sure there is much rhyme or reason regarding which tests it fails
+# and which ones it passes.
+if {[istarget "rs6000-*-aix*"] && !$gcc_compiled} then {
+    warning "xfails in opaque.exp may not be set up correctly for xlc"
+}
+
+setup_xfail_on_opaque_pointer
+gdb_test "whatis foop" \
+    "type = struct foo \[*\]+" \
+    "whatis on opaque struct pointer (statically)"
+
+
+# Ensure that we know the form of the structure that foop points to.
+
+setup_xfail_on_opaque_pointer
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "hppa*-*-hpux*" }
+gdb_test "ptype foop" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\} \[*\]+" \
+    "ptype on opaque struct pointer (statically)"
+
+
+# An instance of the opaque structure (afoo) is defined in a different file.
+# Ensure that we can locate afoo and the structure definition.
+
+gdb_test "whatis afoo" \
+    "type = struct foo" \
+    "whatis on opaque struct instance (statically)"
+
+
+# Ensure that we know the form of "afoo".
+
+gdb_test "ptype afoo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct instance (statically)"
+
+
+# Ensure that we know what a struct foo looks like.
+
+gdb_test "ptype struct foo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct tagname (statically)"
+
+
+#
+# Done with static tests, now test dynamic opaque structure handling.
+# We reload the symbol table so we forget about anything we might
+# have learned during the static tests.
+#
+
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+}
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Run to main, where struct foo is incomplete.
+if ![runto_main] {
+    perror "cannot run to breakpoint at main"
+}
+
+
+# The current source file is now the one containing main().  The structure foo
+# is defined in a different file, but we have a pointer to an instance of
+# the opaque structure in the current file.  Ensure we know it's type.
+
+setup_xfail_on_opaque_pointer
+gdb_test "whatis foop" \
+    "type = struct foo \[*\]+" \
+    "whatis on opaque struct pointer (dynamically)"
+
+
+# Ensure that we know the form of the thing foop points to.
+
+setup_xfail_on_opaque_pointer
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "hppa*-*-hpux*" }
+gdb_test "ptype foop" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\} \[*\]+" \
+    "ptype on opaque struct pointer (dynamically) 1"
+
+gdb_test "whatis afoo" \
+    "type = struct foo" \
+    "whatis on opaque struct instance (dynamically) 1"
+
+
+# Ensure that we know the form of afoo, an instance of a struct foo.
+
+gdb_test "ptype afoo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct instance (dynamically) 1"
+
+
+# Ensure that we know the form of an explicit struct foo.
+
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+gdb_test "ptype struct foo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct tagname (dynamically) 1"
+
+
+# Now reload the symbols again so we forget about anything we might
+# have learned reading the symbols during the previous tests.
+
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+}
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Run to getfoo, where struct foo is complete.
+if ![runto getfoo] {
+    perror "cannot run to breakpoint at getfoo"
+}
+
+
+# Ensure that we know what foop is.
+
+setup_xfail_on_opaque_pointer
+gdb_test "whatis foop" \
+    "type = struct foo \[*\]+" \
+    "whatis on opaque struct pointer (dynamically) 1"
+
+
+# Ensure that we know the form of the thing foop points to.
+
+setup_xfail_on_opaque_pointer
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "hppa*-*-hpux*" }
+gdb_test "ptype foop" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\} \[*\]+" \
+    "ptype on opaque struct pointer (dynamically) 2"
+
+gdb_test "whatis afoo" \
+    "type = struct foo" \
+    "whatis on opaque struct instance (dynamically) 2"
+
+
+# Ensure that we know the form of afoo, an instance of a struct foo.
+
+gdb_test "ptype afoo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct instance (dynamically) 2"
+
+
+# Ensure that we know the form of an explicit struct foo.
+
+gdb_test "ptype struct foo" \
+    "type = struct foo \{\[\r\n\]+    int a;\[\r\n\]+    int b;\[\r\n\]+\}" \
+    "ptype on opaque struct tagname (dynamically) 2"
diff --git a/gdb/testsuite/gdb.base/opaque0.c b/gdb/testsuite/gdb.base/opaque0.c
new file mode 100644
index 0000000..c6e239e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/opaque0.c
@@ -0,0 +1,20 @@
+/*  Note that struct foo is opaque (never defined) in this file.  This
+    is allowed by C since this file does not reference any members of
+    the structure.  The debugger needs to be able to associate this
+    opaque structure definition with the full definition in another
+    file.
+*/
+
+struct foo *foop;
+extern struct foo *getfoo ();
+
+int main ()
+{
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    foop = getfoo ();
+    putfoo (foop);
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.base/opaque1.c b/gdb/testsuite/gdb.base/opaque1.c
new file mode 100644
index 0000000..4a3c855
--- /dev/null
+++ b/gdb/testsuite/gdb.base/opaque1.c
@@ -0,0 +1,18 @@
+struct foo {
+    int a;
+    int b;
+} afoo = { 1, 2};
+
+struct foo *getfoo ()
+{
+    return (&afoo);
+}
+
+#ifdef __STDC__
+void putfoo (struct foo *foop)
+#else
+void putfoo (foop)
+     struct foo *foop;
+#endif
+{
+}
diff --git a/gdb/testsuite/gdb.base/overlays.c b/gdb/testsuite/gdb.base/overlays.c
new file mode 100644
index 0000000..d02ed70
--- /dev/null
+++ b/gdb/testsuite/gdb.base/overlays.c
@@ -0,0 +1,34 @@
+/* Support program for testing gdb's ability to debug overlays
+   in the inferior.  */
+
+#include "ovlymgr.h"
+
+extern int foo PARAMS((int));
+extern int bar PARAMS((int));
+extern int baz PARAMS((int));
+extern int grbx PARAMS((int));
+
+int main ()
+{
+  int a, b, c, d, e;
+
+  OverlayLoad (0);
+  OverlayLoad (4);
+  a = foo (1);
+  OverlayLoad (1);
+  OverlayLoad (5);
+  b = bar (1);
+  OverlayLoad (2);
+  OverlayLoad (6);
+  c = baz (1);
+  OverlayLoad (3);
+  OverlayLoad (7);
+  d = grbx (1);
+  e = a + b + c + d;
+  return (e != ('f' + 'o' +'o'
+		+ 'b' + 'a' + 'r'
+		+ 'b' + 'a' + 'z'
+		+ 'g' + 'r' + 'b' + 'x'));
+
+}
+
diff --git a/gdb/testsuite/gdb.base/overlays.exp b/gdb/testsuite/gdb.base/overlays.exp
new file mode 100644
index 0000000..512e73c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/overlays.exp
@@ -0,0 +1,246 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+# 
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+# 
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+# 
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test running programs
+#
+
+set prms_id 0
+set bug_id 0
+
+if [istarget "d10v-*-*"] then {
+    set linker_script "${srcdir}/${subdir}/d10v.ld";
+} elseif [istarget "m32r-*-*"] then {
+    set linker_script "${srcdir}/${subdir}/m32r.ld";
+} else {
+    verbose "Skipping overlay test -- not implemented for this target."
+    return 
+}
+
+set testfile "overlays"
+set binfile ${objdir}/${subdir}/${testfile}
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set foo     ${srcdir}/${subdir}/foo.c
+set bar     ${srcdir}/${subdir}/bar.c
+set baz     ${srcdir}/${subdir}/baz.c
+set grbx    ${srcdir}/${subdir}/grbx.c
+
+if {[gdb_compile "${srcfile}" "${testfile}.o" object {debug}] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if {[gdb_compile "${srcdir}/${subdir}/ovlymgr.c" ovlymgr.o object {debug}] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if {[gdb_compile "${foo}" foo.o object {debug} ] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if {[gdb_compile "${bar}" bar.o object {debug}] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if {[gdb_compile "${baz}" baz.o object {debug}] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if {[gdb_compile "${grbx}" grbx.o object {debug}] != ""} then {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+if  {[gdb_compile "${testfile}.o ovlymgr.o foo.o bar.o baz.o grbx.o" ${binfile} executable "ldscript=-Wl,-T$linker_script"] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+remote_exec build "mv ${testfile}.o foo.o bar.o baz.o grbx.o ovlymgr.o ${objdir}/${subdir}"
+
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    gdb_suppress_tests;
+}
+
+# couple of convenience variables
+set fptrcast [string_to_regexp "(int (*)(int))"]
+set iptrcast [string_to_regexp "(int *)"]
+
+gdb_test "overlay manual" "" 
+gdb_test "overlay list" "No sections are mapped." "List with none mapped"
+
+# capture the LMA addresses of [foo bar baz grbx foox barx bazx grbxx]
+
+gdb_test "print \$foo_lma = &foo" \
+	".* $fptrcast 0x.* <\\*foo\\*>"  "foo load addr"
+gdb_test "print \$bar_lma = &bar" \
+	".* $fptrcast 0x.* <\\*bar\\*>"  "bar load addr"
+gdb_test "print \$baz_lma = &baz" \
+	".* $fptrcast 0x.* <\\*baz\\*>"  "baz load addr"
+gdb_test "print \$grbx_lma = &grbx" \
+	".* $fptrcast 0x.* <\\*grbx\\*>" "grbx load addr"
+gdb_test "print \$foox_lma = &foox" \
+	".* $iptrcast 0x.*"  "foox load addr"
+gdb_test "print \$barx_lma = &barx" \
+	".* $iptrcast 0x.*"  "barx load addr"
+gdb_test "print \$bazx_lma = &bazx" \
+	".* $iptrcast 0x.*"  "bazx load addr"
+gdb_test "print \$grbxx_lma = &grbxx" \
+	".* $iptrcast 0x.*" "grbxx load addr"
+
+# map each overlay successively, and
+# capture the VMA addresses of [foo bar baz grbx foox barx bazx grbxx]
+
+gdb_test "overlay map .ovly0" "" 
+gdb_test "overlay list" "Section .ovly0, loaded at.*, mapped at.*" "List ovly0"
+gdb_test "print \$foo_vma = &foo" \
+	".* $fptrcast 0x.* <foo>"  "foo runtime addr"
+
+gdb_test "overlay map .ovly1" "" 
+gdb_test "overlay list" "Section .ovly1, loaded at.*, mapped at.*" "List ovly1"
+gdb_test "print \$bar_vma = &bar" \
+	".* $fptrcast 0x.* <bar>"  "bar runtime addr"
+
+gdb_test "overlay map .ovly2" "" 
+gdb_test "overlay list" "Section .ovly2, loaded at.*, mapped at.*" "List ovly2"
+gdb_test "print \$baz_vma = &baz" \
+	".* $fptrcast 0x.* <baz>"  "baz runtime addr"
+
+gdb_test "overlay map .ovly3" "" 
+gdb_test "overlay list" "Section .ovly3, loaded at.*, mapped at.*" "List ovly3"
+gdb_test "print \$grbx_vma = &grbx" \
+	".* $fptrcast 0x.* <grbx>"  "grbx runtime addr"
+
+gdb_test "overlay map .data00" "" 
+gdb_test "overlay list" "Section .data00, loaded .*, mapped .*" "List data00"
+gdb_test "print \$foox_vma = &foox" \
+	".* $iptrcast 0x.*"  "foox runtime addr"
+
+gdb_test "overlay map .data01" "" 
+gdb_test "overlay list" "Section .data01, loaded .*, mapped .*" "List data01"
+gdb_test "print \$barx_vma = &barx" \
+	".* $iptrcast 0x.*"  "barx runtime addr"
+
+gdb_test "overlay map .data02" "" 
+gdb_test "overlay list" "Section .data02, loaded .*, mapped .*" "List data02"
+gdb_test "print \$bazx_vma = &bazx" \
+	".* $iptrcast 0x.*"  "bazx runtime addr"
+
+gdb_test "overlay map .data03" "" 
+gdb_test "overlay list" "Section .data03, loaded .*, mapped .*" "List data03"
+gdb_test "print \$grbxx_vma = &grbxx" \
+	".* $iptrcast 0x.*"  "grbxx runtime addr"
+
+# Verify that LMA != VMA
+
+gdb_test "print \$foo_lma   != \$foo_vma" ".* = 1"   "foo's LMA   != VMA"
+gdb_test "print \$bar_lma   != \$bar_vma" ".* = 1"   "bar's LMA   != VMA"
+gdb_test "print \$baz_lma   != \$baz_vma" ".* = 1"   "baz's LMA   != VMA"
+gdb_test "print \$grbx_lma  != \$grbx_vma" ".* = 1"  "grbx's LMA  != VMA"
+gdb_test "print \$foox_lma  != \$foox_vma" ".* = 1"  "foox's LMA  != VMA"
+gdb_test "print \$barx_lma  != \$barx_vma" ".* = 1"  "barx's LMA  != VMA"
+gdb_test "print \$bazx_lma  != \$bazx_vma" ".* = 1"  "bazx's LMA  != VMA"
+gdb_test "print \$grbxx_lma != \$grbxx_vma" ".* = 1" "grbxx's LMA != VMA"
+
+# Verify that early-mapped overlays have been bumped out 
+# by later-mapped overlays layed over in the same VMA range.
+
+send_gdb "overlay list\n"
+gdb_expect {
+    -re ".*ovly0, " 		{ fail ".ovly0  not unmapped by .ovly1"  }
+    -re ".*ovly2, "	 	{ fail ".ovly2  not unmapped by .ovly3"  }
+    -re ".*data00,"		{ fail ".data00 not unmapped by .data01" }
+    -re ".*data02,"		{ fail ".data02 not unmapped by .data03" }
+    -re ".*$gdb_prompt $"	{ pass "Automatic unmapping"             }
+    timeout			{ fail "(timeout) Automatic unmapping"   }
+}
+
+# test automatic mode
+
+gdb_test "overlay auto" ""
+gdb_test "overlay list" "No sections are mapped." "List none mapped (auto)"
+gdb_test "break foo"  "Breakpoint .*at .*file .*foo.c.*"  "break foo"
+gdb_test "break bar"  "Breakpoint .*at .*file .*bar.c.*"  "break bar"
+gdb_test "break baz"  "Breakpoint .*at .*file .*baz.c.*"  "break baz"
+gdb_test "break grbx" "Breakpoint .*at .*file .*grbx.c.*" "break grbx"
+
+send_gdb "continue\n"
+gdb_expect {
+    -re "Breakpoint .* foo .x=1. at .*$gdb_prompt $" { pass   "hit foo" }
+    -re ".*$gdb_prompt $"			     { fail   "hit foo" }
+    timeout				     { fail "(timeout) hit foo" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+    -re "#0 .*foo .*#1 .*main .*$gdb_prompt $"       { pass   "BT foo" }
+    -re ".*$gdb_prompt $"			     { fail   "BT foo" }
+    timeout				     { fail "(timeout) BT foo" }
+}
+
+
+send_gdb "continue\n"
+gdb_expect {
+    -re "Breakpoint .* bar .x=1. at .*$gdb_prompt $" { pass   "hit bar" }
+    -re ".*$gdb_prompt $"			     { fail   "hit bar" }
+    timeout				     { fail "(timeout) hit bar" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+    -re "#0 .*bar .*#1 .*main .*$gdb_prompt $"       { pass   "BT bar" }
+    -re ".*$gdb_prompt $"			     { fail   "BT bar" }
+    timeout				     { fail "(timeout) BT bar" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+    -re "Breakpoint .* baz .x=1. at .*$gdb_prompt $" { pass   "hit baz" }
+    -re ".*$gdb_prompt $"			     { fail   "hit baz" }
+    timeout				     { fail "(timeout) hit baz" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+    -re "#0 .*baz .*#1 .*main .*$gdb_prompt $"       { pass   "BT baz" }
+    -re ".*$gdb_prompt $"			     { fail   "BT baz" }
+    timeout				     { fail "(timeout) BT baz" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+    -re "Breakpoint .* grbx .x=1. at .*$gdb_prompt $" { pass   "hit grbx" }
+    -re ".*$gdb_prompt $"			      { fail   "hit grbx" }
+    timeout				      { fail "(timeout) hit grbx" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+    -re "#0 .*grbx .*#1 .*main .*$gdb_prompt $"      { pass   "BT grbx" }
+    -re ".*$gdb_prompt $"			     { fail   "BT grbx" }
+    timeout				     { fail "(timeout) BT grbx" }
+}
+
diff --git a/gdb/testsuite/gdb.base/ovlymgr.c b/gdb/testsuite/gdb.base/ovlymgr.c
new file mode 100644
index 0000000..bdb90fe
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ovlymgr.c
@@ -0,0 +1,225 @@
+
+/*
+ * Ovlymgr.c -- Runtime Overlay Manager for the GDB testsuite.
+ */
+
+#include "ovlymgr.h"
+
+/* Local functions and data: */
+
+extern unsigned long _ovly_table[][4];
+extern unsigned long _novlys __attribute__ ((section (".data")));
+enum ovly_index { VMA, SIZE, LMA, MAPPED};
+
+static void ovly_copy (unsigned long dst, unsigned long src, long size);
+
+/* Flush the data and instruction caches at address START for SIZE bytes.
+   Support for each new port must be added here.  */
+/* FIXME: Might be better to have a standard libgloss function that
+   ports provide that we can then use.  Use libgloss instead of newlib
+   since libgloss is the one intended to handle low level system issues.
+   I would suggest something like _flush_cache to avoid the user's namespace
+   but not be completely obscure as other things may need this facility.  */
+ 
+static void
+FlushCache (void)
+{
+#ifdef __M32R__
+  volatile char *mspr = (char *) 0xfffffff7;
+  *mspr = 1;
+#endif
+}
+
+/* OverlayLoad:
+ * Copy the overlay into its runtime region,
+ * and mark the overlay as "mapped".
+ */
+
+bool
+OverlayLoad (unsigned long ovlyno)
+{
+  unsigned long i;
+
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);	/* fail, bad ovly number */
+
+  if (_ovly_table[ovlyno][MAPPED])
+    return TRUE;	/* this overlay already mapped -- nothing to do! */
+
+  for (i = 0; i < _novlys; i++)
+    if (i == ovlyno)
+      _ovly_table[i][MAPPED] = 1;	/* this one now mapped */
+    else if (_ovly_table[i][VMA] == _ovly_table[ovlyno][VMA])
+      _ovly_table[i][MAPPED] = 0;	/* this one now un-mapped */
+
+  ovly_copy (_ovly_table[ovlyno][VMA], 
+	     _ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][SIZE]);
+
+  FlushCache ();
+
+  return TRUE;
+}
+
+/* OverlayUnload:
+ * Copy the overlay back into its "load" region.
+ * Does NOT mark overlay as "unmapped", therefore may be called
+ * more than once for the same mapped overlay.
+ */
+ 
+bool
+OverlayUnload (unsigned long ovlyno)
+{
+  if (ovlyno < 0 || ovlyno >= _novlys)
+    exit (-1);  /* fail, bad ovly number */
+ 
+  if (!_ovly_table[ovlyno][MAPPED])
+    exit (-1);  /* error, can't copy out a segment that's not "in" */
+ 
+  ovly_copy (_ovly_table[ovlyno][LMA], 
+	     _ovly_table[ovlyno][VMA],
+	     _ovly_table[ovlyno][SIZE]);
+
+  return TRUE;
+}
+
+#ifdef __D10V__
+#define IMAP0       (*(short *)(0xff00))
+#define IMAP1       (*(short *)(0xff02))
+#define DMAP        (*(short *)(0xff04))
+
+static void
+D10VTranslate (unsigned long logical,
+	       short *dmap,
+	       unsigned long **addr)
+{
+  unsigned long physical;
+  unsigned long seg;
+  unsigned long off;
+
+  /* to access data, we use the following mapping 
+     0x00xxxxxx: Logical data address segment        (DMAP translated memory)
+     0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
+     0x10xxxxxx: Physical data memory segment        (On-chip data memory)
+     0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
+     0x12xxxxxx: Phisical unified memory segment     (Unified memory)
+     */
+
+  /* Addresses must be correctly aligned */
+  if (logical & (sizeof (**addr) - 1))
+    exit (-1);
+
+  /* If the address is in one of the two logical address spaces, it is
+     first translated into a physical address */
+  seg = (logical >> 24);
+  off = (logical & 0xffffffL);
+  switch (seg) 
+      {
+      case 0x00: /* in logical data address segment */
+	if (off <= 0x7fffL)
+	  physical = (0x10L << 24) + off;
+	else
+	  /* Logical address out side of on-chip segment, not
+             supported */
+	  exit (-1);
+	break;
+      case 0x01: /* in logical instruction address segment */
+	{
+	  short map;
+	  if (off <= 0x1ffffL)
+	    map = IMAP0;
+	  else if (off <= 0x3ffffL)
+	    map = IMAP1;
+	  else
+	    /* Logical address outside of IMAP[01] segment, not
+	       supported */
+	    exit (-1);
+	  if (map & 0x1000L)
+	    {
+	    /* Instruction memory */
+	      physical = (0x11L << 24) | off;
+	    }
+	  else
+	    {
+	    /* Unified memory */
+	      physical = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
+	      if (physical > 0xffffffL)
+		/* Address outside of unified address segment */
+		exit (-1);
+	      physical |= (0x12L << 24);
+	    }
+	  break;
+	}
+      case 0x10:
+      case 0x11:
+      case 0x12:
+	physical = logical;
+	break;
+      default:
+	exit (-1);	/* error */
+      }
+
+  seg = (physical >> 24);
+  off = (physical & 0xffffffL);
+  switch (seg) 
+    {
+    case 0x10:	/* dst is a 15 bit offset into the on-chip memory */
+      *dmap = 0;
+      *addr = (long *) (0x0000 + ((short)off & 0x7fff));
+      break;
+    case 0x11:	/* dst is an 18-bit offset into the on-chip
+		   instruction memory */
+      *dmap = 0x1000L | ((off & 0x3ffffL) >> 14);
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    case 0x12:	/* dst is a 24-bit offset into unified memory */
+      *dmap = off >> 14;
+      *addr = (long *) (0x8000 + ((short)off & 0x3fff));
+      break;
+    default:
+      exit (-1);	/* error */
+    }
+}
+#endif /* __D10V__ */
+
+static void
+ovly_copy (unsigned long dst, unsigned long src, long size)
+{
+#ifdef  __M32R__
+  memcpy ((void *) dst, (void *) src, size);
+  return;
+#endif /* M32R */
+
+#ifdef  __D10V__
+  unsigned long *s, *d, tmp;
+  short dmap_src, dmap_dst;
+  short dmap_save;
+
+  /* all section sizes should by multiples of 4 bytes */
+  dmap_save = DMAP;
+
+  D10VTranslate (src, &dmap_src, &s);
+  D10VTranslate (dst, &dmap_dst, &d);
+
+  while (size > 0)
+    {
+      /* NB: Transfer 4 byte (long) quantites, problems occure
+	 when only two bytes are transfered */
+      DMAP = dmap_src;
+      tmp = *s;
+      DMAP = dmap_dst;
+      *d = tmp; 
+      d++;
+      s++;
+      size -= sizeof (tmp);
+      src += sizeof (tmp);
+      dst += sizeof (tmp);
+      if ((src & 0x3fff) == 0)
+	D10VTranslate (src, &dmap_src, &s);
+      if ((dst & 0x3fff) == 0)
+	D10VTranslate (dst, &dmap_dst, &d);
+    }
+  DMAP = dmap_save;
+#endif /* D10V */
+}
+
diff --git a/gdb/testsuite/gdb.base/ovlymgr.h b/gdb/testsuite/gdb.base/ovlymgr.h
new file mode 100644
index 0000000..bd0d40a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ovlymgr.h
@@ -0,0 +1,17 @@
+/*
+ * Sample runtime overlay manager.
+ */
+
+#ifdef NO_PROTOTYPES
+#define PARAMS(paramlist) ()
+#else
+#define PARAMS(paramlist) paramlist
+#endif
+
+typedef enum { FALSE, TRUE } bool;
+
+/* Entry Points: */
+
+bool OverlayLoad   PARAMS((unsigned long ovlyno));
+bool OverlayUnload PARAMS((unsigned long ovlyno));
+
diff --git a/gdb/testsuite/gdb.base/pointers.c b/gdb/testsuite/gdb.base/pointers.c
new file mode 100644
index 0000000..8cac2c2
--- /dev/null
+++ b/gdb/testsuite/gdb.base/pointers.c
@@ -0,0 +1,176 @@
+
+#if !defined (__STDC__) && !defined (_AIX)
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+
+
+char		*v_char_pointer;
+signed char	*v_signed_char_pointer;
+unsigned char	*v_unsigned_char_pointer;
+
+short		*v_short_pointer;
+signed short	*v_signed_short_pointer;
+unsigned short	*v_unsigned_short_pointer;
+
+int		*v_int_pointer;
+int             *v_int_pointer2;
+signed int	*v_signed_int_pointer;
+unsigned int	*v_unsigned_int_pointer;
+
+long		*v_long_pointer;
+signed long	*v_signed_long_pointer;
+unsigned long	*v_unsigned_long_pointer;
+
+float		*v_float_pointer;
+double		*v_double_pointer;
+
+
+char		v_char_array[2];
+signed char	v_signed_char_array[2];
+unsigned char	v_unsigned_char_array[2];
+
+short		v_short_array[2];
+signed short	v_signed_short_array[2];
+unsigned short	v_unsigned_short_array[2];
+
+int		v_int_array[2];
+signed int	v_signed_int_array[2];
+unsigned int	v_unsigned_int_array[2];
+
+long		v_long_array[2];
+signed long	v_signed_long_array[2];
+unsigned long	v_unsigned_long_array[2];
+
+float		v_float_array[2];
+double		v_double_array[2];
+
+int matrix[2][3] = { { 0, 1, 2}, {3, 4, 5}};
+int (*rptr)[3] = matrix;
+
+float ** ptr_to_ptr_to_float;
+
+int y;
+
+int main ()
+{
+    void dummy();
+    
+    /* Ensure that malloc is a pointer type; avoid use of "void" and any include files. */
+    /* extern char *malloc();*/
+
+    /*  void *malloc(size_t);*/
+    
+
+    
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  dummy();
+/*  v_int_pointer2 = &v_int_pointer;
+  v_unsigned_int_pointer = &v_int;
+  
+  y = (v_unsigned_int_pointer == v_double_pointer);
+  
+  x = v_unsigned_int_pointer * v_double_pointer;
+  
+  v_unsigned_int_pointer = v_double_pointer;
+  
+  v_unsigned_int_pointer = v_unsigned_int;*/
+  
+  return 0;
+  
+}
+
+void dummy()
+{
+    
+  
+  v_char = 0;
+  v_signed_char = 1;
+  v_unsigned_char = 2;
+
+  v_short = 3;
+  v_signed_short = 4;
+  v_unsigned_short = 5;    
+
+  v_int = 6;
+  v_signed_int = 7;
+  v_unsigned_int = 8;    
+
+  v_long = 9;
+  v_signed_long = 10;
+  v_unsigned_long = 11;    
+  
+  v_float = 100.0;
+  v_double = 200.0;
+
+
+
+  v_char_pointer = &v_char;
+  v_signed_char_pointer = &v_signed_char;
+  v_unsigned_char_pointer = &v_unsigned_char;
+
+  v_short_pointer = &v_short;
+  v_signed_short_pointer = &v_signed_short;
+  v_unsigned_short_pointer = &v_unsigned_short;
+
+  v_int_pointer = &v_int;
+  v_signed_int_pointer = &v_signed_int;
+  v_unsigned_int_pointer = &v_unsigned_int;
+
+  v_long_pointer = &v_long;
+  v_signed_long_pointer = &v_signed_long;
+  v_unsigned_long_pointer = &v_unsigned_long;
+
+  v_float_pointer = &v_float;
+  v_double_pointer = &v_double;
+
+  ptr_to_ptr_to_float = &v_float_pointer;
+  
+  
+  v_char_array[0] = v_char;
+  v_signed_char_array[0] = v_signed_char;
+  v_unsigned_char_array[0] = v_unsigned_char;
+
+  v_short_array[0] = v_short;
+  v_signed_short_array[0] = v_signed_short;
+  v_unsigned_short_array[0] = v_unsigned_short;
+
+  v_int_array[0] = v_int;
+  v_int_array[1] = v_int * 3;
+  
+  v_signed_int_array[0] = v_signed_int;
+  v_unsigned_int_array[0] = v_unsigned_int;
+
+  v_long_array[0] = v_long;
+  v_signed_long_array[0] = v_signed_long;
+  v_unsigned_long_array[0] = v_unsigned_long;
+
+  v_float_array[0] = v_float;
+  v_double_array[0] = v_double;
+
+}
+
+
+
diff --git a/gdb/testsuite/gdb.base/pointers.exp b/gdb/testsuite/gdb.base/pointers.exp
new file mode 100644
index 0000000..7a0e44f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/pointers.exp
@@ -0,0 +1,358 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for pointer arithmetic and pointer dereferencing
+# with integer type variables and pointers to integers
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "pointers"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+gdb_test "next" "return 0;" "continuing after dummy()"
+
+
+#
+# let's see if gdb catches some illegal operations on pointers
+#
+# I must comment these out because strict type checking is not
+# supported in this version of GDB. I do not really know
+# what the expected gdb reply is.
+#
+
+#send_gdb "print v_int_pointer2 = &v_int_pointer\n"
+#gdb_expect {
+#    -re ".*.*$gdb_prompt $" {
+#        pass "illegal pointer assignment rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer assignment rejected" }
+#    timeout           { fail "(timeout) illegal pointer assignment rejected" }    
+#  }
+
+
+#send_gdb "print v_unsigned_int_pointer = &v_int\n"
+#gdb_expect {
+#    -re ".*.*$gdb_prompt $" {
+#        pass "illegal pointer assignment rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer assignment rejected" }
+#    timeout           { fail "(timeout) ilegal pointer assignment rejected" }    
+#  }
+
+#send_gdb "print v_unsigned_int_pointer == v_double_pointer\n"
+#gdb_expect {
+#    -re ".*.*$gdb_prompt $" {
+#        pass "illegal pointer operation (+) rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer operation (+) rejected" }
+#    timeout           { fail "(timeout) illegal pointer operation (+) rejected" }    
+#  }
+
+
+#send_gdb "print v_unsigned_int_pointer * v_double_pointer\n"
+#gdb_expect {
+#    -re ".*Argument to arithmetic operation not a number or boolean.*$gdb_prompt $" {
+#        pass "illegal pointer operation (*) rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer operation (*) rejected" }
+#    timeout           { fail "(timeout) illegal pointer operation (*) rejected" }    
+#  }
+
+
+#send_gdb "print v_unsigned_int_pointer = v_double_pointer\n"
+#gdb_expect {
+#    -re ".*.*$gdb_prompt $" {
+#        pass "ilegal pointer assignment rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer assignment rejected" }
+#    timeout           { fail "(timeout) illegal pointer assignment rejected" }    
+#  }
+
+
+#send_gdb "print v_unsigned_int_pointer = v_unsigned_int\n"
+#gdb_expect {
+#    -re ".*.*$gdb_prompt $" {
+#        pass "illegal pointer assignment rejected"
+#      }
+#    -re ".*$gdb_prompt $" { fail "illegal pointer assignment rejected" }
+#    timeout           { fail "(timeout) illegal pointer assignment rejected" }    
+#  }
+
+gdb_test "set variable v_int_pointer=&v_int_array\[0\]" "" "set pointer to beginning of array"
+gdb_test "set variable v_int_pointer2=&v_int_array\[1\]" "" "set pointer to end of array"
+
+
+send_gdb "print *v_int_pointer\n"
+gdb_expect {
+    -re ".*= 6.*$gdb_prompt $" {
+        pass "print object pointed to"
+      }
+    -re ".*$gdb_prompt $" { fail "print object pointed to" }
+    timeout           { fail "(timeout) print object pointed to" }    
+  }
+  
+send_gdb "print *v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 18.*$gdb_prompt $" {
+        pass "print object pointed to"
+      }
+    -re ".*$gdb_prompt $" { fail "print object pointed to" }
+    timeout           { fail "(timeout) print object pointed to" }    
+  }
+
+
+send_gdb "print v_int_pointer == v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 0.*$gdb_prompt $" {
+        pass "pointer1==pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1==pointer2" }
+    timeout           { fail "(timeout) pointer1==pointer2" }    
+  }
+
+send_gdb "print v_int_pointer != v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 1.*$gdb_prompt $" {
+        pass "pointer1!=pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1!=pointer2" }
+    timeout           { fail "(timeout) pointer1!=pointer2" }    
+  }
+
+
+send_gdb "print v_int_pointer <= v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 1.*$gdb_prompt $" {
+        pass "pointer1<=pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1<=pointer2" }
+    timeout           { fail "(timeout) pointer1<=pointer2" }    
+  }
+
+
+send_gdb "print v_int_pointer >= v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 0.*$gdb_prompt $" {
+        pass "pointer1>=pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1>=pointer2" }
+    timeout           { fail "(timeout) pointer1>=pointer2" }    
+  }
+
+
+send_gdb "print v_int_pointer < v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 1.*$gdb_prompt $" {
+        pass "pointer1<pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1<pointer2" }
+    timeout           { fail "(timeout) pointer1<pointer2" }    
+  }
+
+send_gdb "print v_int_pointer > v_int_pointer2\n"
+gdb_expect {
+    -re ".*= 0.*$gdb_prompt $" {
+        pass "pointer1>pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1>pointer2" }
+    timeout           { fail "(timeout) pointer1>pointer2" }    
+  }
+
+
+gdb_test "set variable y = *v_int_pointer++" "" "set y = *v_int_pointer++"
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*= 6.*$gdb_prompt $" {
+        send_gdb "print *v_int_pointer\n"
+        gdb_expect {
+             -re ".*= 18.*$gdb_prompt $" {
+                 pass "pointer assignment and increment"
+               }
+             -re ".*$gdb_prompt $" { fail "pointer assignment and increment" }
+             timeout           { fail "(timeout) pointer assignment and increment" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "pointer assignment and increment" }
+    timeout           { fail "(timeout) pointer assignment and increment" }    
+  }
+
+
+
+
+gdb_test "set variable y = *--v_int_pointer2" "" "set y = *--v_int_pointer2"
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*= 6.*$gdb_prompt $" {
+        send_gdb "print *v_int_pointer2\n"
+        gdb_expect {
+             -re ".*= 6.*$gdb_prompt $" {
+                 pass "pointer decrement and assignment"
+               }
+             -re ".*$gdb_prompt $" { fail "pointer decrement and assignment" }
+             timeout           { fail "(timeout) pointer decrement and assignment" }    
+         }
+         }
+    -re ".*$gdb_prompt $" { fail "pointer decrement and assignment" }
+    timeout           { fail "(timeout) pointer decrement and assignment" }    
+  }
+
+gdb_test "set variable y =v_int_pointer-v_int_pointer2" "" "set y =v_int_pointer-v_int_pointer2"
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*= 1.*$gdb_prompt $" {
+        pass "pointer1-pointer2"
+      }
+    -re ".*$gdb_prompt $" { fail "pointer1-pointer2" }
+    timeout           { fail "(timeout) pointer1-pointer2" }    
+  }
+
+gdb_test "set variable v_int_pointer=v_int_array" "" "set v_int_pointer=v_int_array"
+send_gdb "print *v_int_pointer\n"
+gdb_expect {
+    -re ".*= 6.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+
+send_gdb "print *(v_int_pointer+1)\n"
+gdb_expect {
+    -re ".*= 18.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+# test print elements of array through pointers
+
+send_gdb "print (*rptr)\[0\]\n"
+gdb_expect {
+    -re ".*= 0.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+send_gdb "print (*rptr)\[1\]\n"
+gdb_expect {
+    -re ".*= 1.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+
+send_gdb "print (*rptr)\[2\]\n"
+gdb_expect {
+    -re ".*= 2.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+gdb_test "set variable rptr = rptr+1" "" "increment rptr"
+
+send_gdb "print (*rptr)\[0\]\n"
+gdb_expect {
+    -re ".*= 3.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+
+send_gdb "print (*rptr)\[1\]\n"
+gdb_expect {
+    -re ".*= 4.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+
+send_gdb "print (*rptr)\[2\]\n"
+gdb_expect {
+    -re ".*= 5.*$gdb_prompt $" {
+        pass "print array element through pointer"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element through pointer" }
+    timeout           { fail "(timeout) print array element through pointer" }    
+  }
+
+
+send_gdb "print *( *(matrix+1) +2)\n"
+gdb_expect {
+    -re ".*= 5.*$gdb_prompt $" {
+        pass "print array element w/ pointer arithmetic"
+      }
+    -re ".*$gdb_prompt $" { fail "print array element w/ pointer arithemtic" }
+    timeout           { fail "(timeout) print array element w/ pointer arithmetic" }    
+  }
+
+
+send_gdb "print **ptr_to_ptr_to_float\n"
+gdb_expect {
+    -re ".*= 100.*$gdb_prompt $" {
+        pass "print through ptr to ptr"
+      }
+    -re ".*$gdb_prompt $" { fail "print through ptr to ptr" }
+    timeout           { fail "(timeout) print through ptr to ptr" }    
+  }
diff --git a/gdb/testsuite/gdb.base/pointers2.c b/gdb/testsuite/gdb.base/pointers2.c
new file mode 100644
index 0000000..6c30621
--- /dev/null
+++ b/gdb/testsuite/gdb.base/pointers2.c
@@ -0,0 +1,51 @@
+void marker1 ()
+{
+    
+}
+
+
+int main()
+{
+    char C, *pC, **ppC, ***pppC, ****ppppC, *****pppppC, ******ppppppC;
+    unsigned char UC, *pUC;
+    short S, *pS;
+    unsigned short US, *pUS;
+    int I, *pI;
+    unsigned int UI, *pUI;
+    long L, *pL;
+    unsigned long UL, *pUL;
+    float F, *pF;
+    double D, *pD;
+    C = 'A';
+    UC = 21;
+    S = -14;
+    US = 7;
+    I = 102;
+    UI = 1002;
+    L = -234;
+    UL = 234;
+    F = 1.25E10;
+    D = -1.375E-123;
+    pC = &C;
+    ppC = &pC;
+    pppC = &ppC;
+    ppppC = &pppC;
+    pppppC = &ppppC;
+    ppppppC = &pppppC;
+    pUC = &UC;
+    pS = &S;
+    pUS = &US;
+    pI = &I;
+    pUI = &UI;
+    pL = &L;
+    pUL = &UL;
+    pF = &F;
+    pD = &D;
+    
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+    marker1();
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.base/pointers2.exp b/gdb/testsuite/gdb.base/pointers2.exp
new file mode 100644
index 0000000..e44e110
--- /dev/null
+++ b/gdb/testsuite/gdb.base/pointers2.exp
@@ -0,0 +1,288 @@
+#   Copyright (C) 1997, 1998
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni. (ezannoni@cygnus.com)
+
+
+# This file is part of the gdb testsuite
+#
+# tests for pointers 
+# with elementary type variables and pointers.
+# 
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "pointers2"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+
+send_gdb "print *pUC\n"
+gdb_expect {
+    -re ".\[0-9\]* = 21 \'.025\'.*$gdb_prompt $" {
+        pass "print value of *pUC"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pUC" }
+    timeout           { fail "(timeout) print value of *pUC" }
+  }
+
+
+send_gdb "ptype pUC\n"
+gdb_expect {
+    -re "type = unsigned char \\*.*$gdb_prompt $"  { pass "ptype pUC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pUC" }
+    timeout             { fail "(timeout) ptype pUC" }
+}
+
+send_gdb "print *pS\n"
+gdb_expect {
+    -re ".\[0-9\]* = -14.*$gdb_prompt $" {
+        pass "print value of *pS"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pS" }
+    timeout           { fail "(timeout) print value of *pS" }
+  }
+
+
+send_gdb "ptype pS\n"
+gdb_expect {
+    -re "type = short \\*.*$gdb_prompt $"  { pass "ptype pS" }
+    -re "type = short int \\*.*$gdb_prompt $"  { pass "ptype pS" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pS" }
+    timeout             { fail "(timeout) ptype pS" }
+}
+
+send_gdb "print *pUS\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7.*$gdb_prompt $" {
+        pass "print value of *pUS"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pUS" }
+    timeout           { fail "(timeout) print value of *pUS" }
+  }
+
+
+send_gdb "ptype pUS\n"
+gdb_expect {
+    -re "type = unsigned short \\*.*$gdb_prompt $"  { pass "ptype pUS" }
+    -re "type = short unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUS" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pUS" }
+    timeout             { fail "(timeout) ptype pUS" }
+}
+
+send_gdb "print *pI\n"
+gdb_expect {
+    -re ".\[0-9\]* = 102.*$gdb_prompt $" {
+        pass "print value of *pI"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pI" }
+    timeout           { fail "(timeout) print value of *pI" }
+  }
+
+
+send_gdb "ptype pI\n"
+gdb_expect {
+    -re "type = int \\*.*$gdb_prompt $"  { pass "ptype pI" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pI" }
+    timeout             { fail "(timeout) ptype pI" }
+}
+
+send_gdb "print *pUI\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1002.*$gdb_prompt $" {
+        pass "print value of *pUI"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pUI" }
+    timeout           { fail "(timeout) print value of *pUI" }
+  }
+
+
+send_gdb "ptype pUI\n"
+gdb_expect {
+    -re "type = unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUI" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pUI" }
+    timeout             { fail "(timeout) ptype pUI" }
+}
+
+send_gdb "print *pL\n"
+gdb_expect {
+    -re ".\[0-9\]* = -234.*$gdb_prompt $" {
+        pass "print value of *pL"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pL" }
+    timeout           { fail "(timeout) print value of *pL" }
+  }
+
+
+send_gdb "ptype pL\n"
+gdb_expect {
+    -re "type = long \\*.*$gdb_prompt $"  { pass "ptype pL" }
+    -re "type = long int \\*.*$gdb_prompt $"  { pass "ptype pL" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pL" }
+    timeout             { fail "(timeout) ptype pL" }
+}
+
+send_gdb "print *pUL\n"
+gdb_expect {
+    -re ".\[0-9\]* = 234.*$gdb_prompt $" {
+        pass "print value of *pUL"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pUL" }
+    timeout           { fail "(timeout) print value of *pUL" }
+  }
+
+
+send_gdb "ptype pUL\n"
+gdb_expect {
+    -re "type = unsigned long \\*.*$gdb_prompt $"  { pass "ptype pUL" }
+    -re "type = long unsigned int \\*.*$gdb_prompt $"  { pass "ptype pUL" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pUL" }
+    timeout             { fail "(timeout) ptype pUL" }
+}
+
+send_gdb "print *pF\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.2\[0-9\]*e\\+10.*$gdb_prompt $" {
+        pass "print value of *pF"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pF" }
+    timeout           { fail "(timeout) print value of *pF" }
+  }
+
+
+send_gdb "ptype pF\n"
+gdb_expect {
+    -re "type = float \\*.*$gdb_prompt $"  { pass "ptype pF" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pF" }
+    timeout             { fail "(timeout) ptype pF" }
+}
+
+send_gdb "print *pD\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.375e-123.*$gdb_prompt $" {
+        pass "print value of *pD"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *pD" }
+    timeout           { fail "(timeout) print value of *pD" }
+  }
+
+
+send_gdb "ptype pD\n"
+gdb_expect {
+    -re "type = double \\*.*$gdb_prompt $"  { pass "ptype pD" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pD" }
+    timeout             { fail "(timeout) ptype pD" }
+}
+
+send_gdb "print ******ppppppC\n"
+gdb_expect {
+    -re ".\[0-9\]* = 65 \'A\'.*$gdb_prompt $" {
+        pass "print value of ******ppppppC"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ******ppppppC" }
+    timeout           { fail "(timeout) print value of ******ppppppC" }
+  }
+
+
+send_gdb "ptype pC\n"
+gdb_expect {
+    -re "type = char \\*.*$gdb_prompt $"  { pass "ptype pC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pC" }
+    timeout             { fail "(timeout) ptype pC" }
+}
+
+send_gdb "ptype ppC\n"
+gdb_expect {
+    -re "type = char \\*\\*.*$gdb_prompt $"  { pass "ptype ppC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype ppC" }
+    timeout             { fail "(timeout) ptype ppC" }
+}
+
+send_gdb "ptype pppC\n"
+gdb_expect {
+    -re "type = char \\*\\*\\*.*$gdb_prompt $"  { pass "ptype  pppC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pppC" }
+    timeout             { fail "(timeout) ptype pppC" }
+}
+
+send_gdb "ptype ppppC\n"
+gdb_expect {
+    -re "type = char \\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype ppppC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype ppppC" }
+    timeout             { fail "(timeout) ptype ppppC" }
+}
+
+send_gdb "ptype pppppC\n"
+gdb_expect {
+    -re "type = char \\*\\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype pppppC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype pppppC" }
+    timeout             { fail "(timeout) ptype pppppC" }
+}
+
+send_gdb "ptype ppppppC\n"
+gdb_expect {
+    -re "type = char \\*\\*\\*\\*\\*\\*.*$gdb_prompt $"  { pass "ptype ppppppC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype ppppppC" }
+    timeout             { fail "(timeout) ptype ppppppC" }
+}
+
diff --git a/gdb/testsuite/gdb.base/printcmds.c b/gdb/testsuite/gdb.base/printcmds.c
new file mode 100644
index 0000000..6f2238b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/printcmds.c
@@ -0,0 +1,101 @@
+/* This table is used as a source for every ascii character.
+   It is explicitly unsigned to avoid differences due to native characters
+   being either signed or unsigned. */
+
+unsigned char ctable1[256] = {
+  0000, 0001, 0002, 0003, 0004, 0005, 0006, 0007,
+  0010, 0011, 0012, 0013, 0014, 0015, 0016, 0017,
+  0020, 0021, 0022, 0023, 0024, 0025, 0026, 0027,
+  0030, 0031, 0032, 0033, 0034, 0035, 0036, 0037,
+  0040, 0041, 0042, 0043, 0044, 0045, 0046, 0047,
+  0050, 0051, 0052, 0053, 0054, 0055, 0056, 0057,
+  0060, 0061, 0062, 0063, 0064, 0065, 0066, 0067,
+  0070, 0071, 0072, 0073, 0074, 0075, 0076, 0077,
+  0100, 0101, 0102, 0103, 0104, 0105, 0106, 0107,
+  0110, 0111, 0112, 0113, 0114, 0115, 0116, 0117,
+  0120, 0121, 0122, 0123, 0124, 0125, 0126, 0127,
+  0130, 0131, 0132, 0133, 0134, 0135, 0136, 0137,
+  0140, 0141, 0142, 0143, 0144, 0145, 0146, 0147,
+  0150, 0151, 0152, 0153, 0154, 0155, 0156, 0157,
+  0160, 0161, 0162, 0163, 0164, 0165, 0166, 0167,
+  0170, 0171, 0172, 0173, 0174, 0175, 0176, 0177,
+  0200, 0201, 0202, 0203, 0204, 0205, 0206, 0207,
+  0210, 0211, 0212, 0213, 0214, 0215, 0216, 0217,
+  0220, 0221, 0222, 0223, 0224, 0225, 0226, 0227,
+  0230, 0231, 0232, 0233, 0234, 0235, 0236, 0237,
+  0240, 0241, 0242, 0243, 0244, 0245, 0246, 0247,
+  0250, 0251, 0252, 0253, 0254, 0255, 0256, 0257,
+  0260, 0261, 0262, 0263, 0264, 0265, 0266, 0267,
+  0270, 0271, 0272, 0273, 0274, 0275, 0276, 0277,
+  0300, 0301, 0302, 0303, 0304, 0305, 0306, 0307,
+  0310, 0311, 0312, 0313, 0314, 0315, 0316, 0317,
+  0320, 0321, 0322, 0323, 0324, 0325, 0326, 0327,
+  0330, 0331, 0332, 0333, 0334, 0335, 0336, 0337,
+  0340, 0341, 0342, 0343, 0344, 0345, 0346, 0347,
+  0350, 0351, 0352, 0353, 0354, 0355, 0356, 0357,
+  0360, 0361, 0362, 0363, 0364, 0365, 0366, 0367,
+  0370, 0371, 0372, 0373, 0374, 0375, 0376, 0377
+};
+
+unsigned char ctable2[] = {
+  'a','X','X','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','X','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','a','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','a','a'
+};
+
+/* Single and multidimensional arrays to test access and printing of array
+   members. */
+
+int int1dim[12] = {0,1,2,3,4,5,6,7,8,9,10,11};
+int int2dim[3][4] = {{0,1,2,3},{4,5,6,7},{8,9,10,11}};
+int int3dim[2][3][2] = {{{0,1},{2,3},{4,5}},{{6,7},{8,9},{10,11}}};
+int int4dim[1][2][3][2] = {{{{0,1},{2,3},{4,5}},{{6,7},{8,9},{10,11}}}};
+
+char *teststring = "teststring contents";
+
+/* Test printing of a struct containing character arrays. */
+
+struct some_arrays {
+    unsigned char array1[4];
+    unsigned char array2[1];
+    unsigned char array3[1];
+    unsigned char array4[2];
+    unsigned char array5[4];
+} arrays = {
+  {'a', 'b', 'c', '\0'},
+  {'d'},
+  {'e'},
+  {'f', 'g' },
+  {'h', 'i', 'j', '\0'}
+};
+
+struct some_arrays *parrays = &arrays;
+
+/* -- */
+
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  malloc(1);
+
+  /* Prevent AIX linker from removing variables.  */
+  return ctable1[0] + ctable2[0] + int1dim[0] + int2dim[0][0]
+    + int3dim[0][0][0] + int4dim[0][0][0][0] + teststring[0] +
+      *parrays -> array1;
+}
diff --git a/gdb/testsuite/gdb.base/printcmds.exp b/gdb/testsuite/gdb.base/printcmds.exp
new file mode 100644
index 0000000..4953ec5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/printcmds.exp
@@ -0,0 +1,695 @@
+# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "printcmds"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Set the current language to C.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_c {} {
+    global gdb_prompt
+
+    if [gdb_test "set language c" "" "set language c"] {
+	return 0
+    }
+
+    if [gdb_test "show language" ".* source language is \"c\".*"] {
+	return 0
+    }
+    return 1;
+}
+
+proc test_integer_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various decimal values.
+
+    gdb_test "p 123" " = 123"
+    gdb_test "p -123" " = -123"
+    gdb_test "p/d 123" " = 123"
+
+    # Test various octal values.
+
+    gdb_test "p 0123" " = 83"
+    gdb_test "p 00123" " = 83"
+    gdb_test "p -0123" " = -83"
+    gdb_test "p/o 0123" " = 0123"
+
+    # Test various hexadecimal values.
+
+    gdb_test "p 0x123" " = 291"
+    gdb_test "p -0x123" " = -291"
+    gdb_test "p 0x0123" " = 291"
+    gdb_test "p -0x0123" " = -291"
+    gdb_test "p 0xABCDEF" " = 11259375"
+    gdb_test "p 0xabcdef" " = 11259375"
+    gdb_test "p 0xAbCdEf" " = 11259375"
+    gdb_test "p/x 0x123" " = 0x123"
+}
+
+proc test_character_literals_accepted {} {
+    global gdb_prompt
+
+    gdb_test "p 'a'" " = 97 'a'"
+    gdb_test "p/c 'a'" " = 97 'a'"
+    gdb_test "p/x 'a'" " = 0x61"
+    gdb_test "p/d 'a'" " = 97"
+    gdb_test "p/t 'a'" " = 1100001"
+    gdb_test "p '\\141'" " = 97 'a'"
+    gdb_test "p/x '\\377'" " = 0xff"
+    # Note "p '\''" => "= 39 '\''"
+    gdb_test "p '\\''" " = 39 '\\\\''"
+    # Note "p '\\'" => "= 92 '\\'"
+    gdb_test "p '\\\\'" " = 92 '\\\\\\\\'"
+}
+
+proc test_integer_literals_rejected {} {
+    global gdb_prompt
+
+    test_print_reject "p 0x" 
+    gdb_test "p ''" "Empty character constant\\."
+    gdb_test "p '''" "Empty character constant\\."
+    test_print_reject "p '\\'"
+
+    # Note that this turns into "p '\\\'" at gdb's input.
+    test_print_reject "p '\\\\\\'"
+
+    # Test various decimal values.
+
+    test_print_reject "p DEADBEEF"
+
+    # Gdb currently fails this test for all configurations.  The C
+    # lexer thinks that 123DEADBEEF is a floating point number, but
+    # then fails to notice that atof() only eats the 123 part.
+    # FIXME:  This should be put into PRMS.
+    # Fixed, 4/25/97, by Bob Manson.
+
+    test_print_reject "p 123DEADBEEF"
+    test_print_reject "p 123foobar.bazfoo3"
+    test_print_reject "p 123EEEEEEEEEEEEEEEEE33333k333"
+    gdb_test "p 123.4+56.7" "180.(099\[0-9]*|100\[0-9\]*)" "check for floating addition"
+
+    # Test various octal values.
+
+    test_print_reject "p 09" 
+    test_print_reject "p 079" 
+
+    # Test various hexadecimal values.
+
+    test_print_reject "p 0xG" 
+    test_print_reject "p 0xAG" 
+}
+
+proc test_print_all_chars {} {
+    global gdb_prompt
+
+    gdb_test "p ctable1\[0\]"   " = 0 '\\\\000'"
+    gdb_test "p ctable1\[1\]"   " = 1 '\\\\001'"
+    gdb_test "p ctable1\[2\]"   " = 2 '\\\\002'"
+    gdb_test "p ctable1\[3\]"   " = 3 '\\\\003'"
+    gdb_test "p ctable1\[4\]"   " = 4 '\\\\004'"
+    gdb_test "p ctable1\[5\]"   " = 5 '\\\\005'"
+    gdb_test "p ctable1\[6\]"   " = 6 '\\\\006'"
+    gdb_test "p ctable1\[7\]"   " = 7 '\\\\a'"
+    gdb_test "p ctable1\[8\]"   " = 8 '\\\\b'"
+    gdb_test "p ctable1\[9\]"   " = 9 '\\\\t'"
+    gdb_test "p ctable1\[10\]"  " = 10 '\\\\n'"
+    gdb_test "p ctable1\[11\]"  " = 11 '\\\\013'"
+    gdb_test "p ctable1\[12\]"  " = 12 '\\\\f'"
+    gdb_test "p ctable1\[13\]"  " = 13 '\\\\r'"
+    gdb_test "p ctable1\[14\]"  " = 14 '\\\\016'"
+    gdb_test "p ctable1\[15\]"  " = 15 '\\\\017'"
+    gdb_test "p ctable1\[16\]"  " = 16 '\\\\020'"
+    gdb_test "p ctable1\[17\]"  " = 17 '\\\\021'"
+    gdb_test "p ctable1\[18\]"  " = 18 '\\\\022'"
+    gdb_test "p ctable1\[19\]"  " = 19 '\\\\023'"
+    gdb_test "p ctable1\[20\]"  " = 20 '\\\\024'"
+    gdb_test "p ctable1\[21\]"  " = 21 '\\\\025'"
+    gdb_test "p ctable1\[22\]"  " = 22 '\\\\026'"
+    gdb_test "p ctable1\[23\]"  " = 23 '\\\\027'"
+    gdb_test "p ctable1\[24\]"  " = 24 '\\\\030'"
+    gdb_test "p ctable1\[25\]"  " = 25 '\\\\031'"
+    gdb_test "p ctable1\[26\]"  " = 26 '\\\\032'"
+    gdb_test "p ctable1\[27\]"  " = 27 '\\\\e'"
+    gdb_test "p ctable1\[28\]"  " = 28 '\\\\034'"
+    gdb_test "p ctable1\[29\]"  " = 29 '\\\\035'"
+    gdb_test "p ctable1\[30\]"  " = 30 '\\\\036'"
+    gdb_test "p ctable1\[31\]"  " = 31 '\\\\037'"
+    gdb_test "p ctable1\[32\]"  " = 32 ' '"
+    gdb_test "p ctable1\[33\]"  " = 33 '!'"
+    gdb_test "p ctable1\[34\]"  " = 34 '\"'"
+    gdb_test "p ctable1\[35\]"  " = 35 '#'"
+    gdb_test "p ctable1\[36\]"  " = 36 '\\\$'"
+    gdb_test "p ctable1\[37\]"  " = 37 '%'"
+    gdb_test "p ctable1\[38\]"  " = 38 '&'"
+    gdb_test "p ctable1\[39\]"  " = 39 '\\\\''"
+    gdb_test "p ctable1\[40\]"  " = 40 '\\('"
+    gdb_test "p ctable1\[41\]"  " = 41 '\\)'"
+    gdb_test "p ctable1\[42\]"  " = 42 '\\*'"
+    gdb_test "p ctable1\[43\]"  " = 43 '\\+'"
+    gdb_test "p ctable1\[44\]"  " = 44 ','"
+    gdb_test "p ctable1\[45\]"  " = 45 '-'"
+    gdb_test "p ctable1\[46\]"  " = 46 '.'"
+    gdb_test "p ctable1\[47\]"  " = 47 '/'"
+    gdb_test "p ctable1\[48\]"  " = 48 '0'"
+    gdb_test "p ctable1\[49\]"  " = 49 '1'"
+    gdb_test "p ctable1\[50\]"  " = 50 '2'"
+    gdb_test "p ctable1\[51\]"  " = 51 '3'"
+    gdb_test "p ctable1\[52\]"  " = 52 '4'"
+    gdb_test "p ctable1\[53\]"  " = 53 '5'"
+    gdb_test "p ctable1\[54\]"  " = 54 '6'"
+    gdb_test "p ctable1\[55\]"  " = 55 '7'"
+    gdb_test "p ctable1\[56\]"  " = 56 '8'"
+    gdb_test "p ctable1\[57\]"  " = 57 '9'"
+    gdb_test "p ctable1\[58\]"  " = 58 ':'"
+    gdb_test "p ctable1\[59\]"  " = 59 ';'"
+    gdb_test "p ctable1\[60\]"  " = 60 '<'"
+    gdb_test "p ctable1\[61\]"  " = 61 '='"
+    gdb_test "p ctable1\[62\]"  " = 62 '>'"
+    gdb_test "p ctable1\[63\]"  " = 63 '\\?'"
+    gdb_test "p ctable1\[64\]"  " = 64 '@'"
+    gdb_test "p ctable1\[65\]"  " = 65 'A'"
+    gdb_test "p ctable1\[66\]"  " = 66 'B'"
+    gdb_test "p ctable1\[67\]"  " = 67 'C'"
+    gdb_test "p ctable1\[68\]"  " = 68 'D'"
+    gdb_test "p ctable1\[69\]"  " = 69 'E'"
+    gdb_test "p ctable1\[70\]"  " = 70 'F'"
+    gdb_test "p ctable1\[71\]"  " = 71 'G'"
+    gdb_test "p ctable1\[72\]"  " = 72 'H'"
+    gdb_test "p ctable1\[73\]"  " = 73 'I'"
+    gdb_test "p ctable1\[74\]"  " = 74 'J'"
+    gdb_test "p ctable1\[75\]"  " = 75 'K'"
+    gdb_test "p ctable1\[76\]"  " = 76 'L'"
+    gdb_test "p ctable1\[77\]"  " = 77 'M'"
+    gdb_test "p ctable1\[78\]"  " = 78 'N'"
+    gdb_test "p ctable1\[79\]"  " = 79 'O'"
+    gdb_test "p ctable1\[80\]"  " = 80 'P'"
+    gdb_test "p ctable1\[81\]"  " = 81 'Q'"
+    gdb_test "p ctable1\[82\]"  " = 82 'R'"
+    gdb_test "p ctable1\[83\]"  " = 83 'S'"
+    gdb_test "p ctable1\[84\]"  " = 84 'T'"
+    gdb_test "p ctable1\[85\]"  " = 85 'U'"
+    gdb_test "p ctable1\[86\]"  " = 86 'V'"
+    gdb_test "p ctable1\[87\]"  " = 87 'W'"
+    gdb_test "p ctable1\[88\]"  " = 88 'X'"
+    gdb_test "p ctable1\[89\]"  " = 89 'Y'"
+    gdb_test "p ctable1\[90\]"  " = 90 'Z'"
+    gdb_test "p ctable1\[91\]"  " = 91 '\\\['"
+    gdb_test "p ctable1\[92\]"  " = 92 '\\\\\\\\'"
+    gdb_test "p ctable1\[93\]"  " = 93 '\\\]'"
+    gdb_test "p ctable1\[94\]"  " = 94 '\\^'"
+    gdb_test "p ctable1\[95\]"  " = 95 '_'"
+    gdb_test "p ctable1\[96\]"  " = 96 '`'"
+    gdb_test "p ctable1\[97\]"  " = 97 'a'"
+    gdb_test "p ctable1\[98\]"  " = 98 'b'"
+    gdb_test "p ctable1\[99\]"  " = 99 'c'"
+    gdb_test "p ctable1\[100\]" " = 100 'd'"
+    gdb_test "p ctable1\[101\]" " = 101 'e'"
+    gdb_test "p ctable1\[102\]" " = 102 'f'"
+    gdb_test "p ctable1\[103\]" " = 103 'g'"
+    gdb_test "p ctable1\[104\]" " = 104 'h'"
+    gdb_test "p ctable1\[105\]" " = 105 'i'"
+    gdb_test "p ctable1\[106\]" " = 106 'j'"
+    gdb_test "p ctable1\[107\]" " = 107 'k'"
+    gdb_test "p ctable1\[108\]" " = 108 'l'"
+    gdb_test "p ctable1\[109\]" " = 109 'm'"
+    gdb_test "p ctable1\[110\]" " = 110 'n'"
+    gdb_test "p ctable1\[111\]" " = 111 'o'"
+    gdb_test "p ctable1\[112\]" " = 112 'p'"
+    gdb_test "p ctable1\[113\]" " = 113 'q'"
+    gdb_test "p ctable1\[114\]" " = 114 'r'"
+    gdb_test "p ctable1\[115\]" " = 115 's'"
+    gdb_test "p ctable1\[116\]" " = 116 't'"
+    gdb_test "p ctable1\[117\]" " = 117 'u'"
+    gdb_test "p ctable1\[118\]" " = 118 'v'"
+    gdb_test "p ctable1\[119\]" " = 119 'w'"
+    gdb_test "p ctable1\[120\]" " = 120 'x'"
+    gdb_test "p ctable1\[121\]" " = 121 'y'"
+    gdb_test "p ctable1\[122\]" " = 122 'z'"
+    gdb_test "p ctable1\[123\]" " = 123 '\[{\]+'"
+    gdb_test "p ctable1\[124\]" " = 124 '\[|\]+'"
+    gdb_test "p ctable1\[125\]" " = 125 '\[}\]+'"
+    gdb_test "p ctable1\[126\]" " = 126 '\[~\]'"
+    gdb_test "p ctable1\[127\]" " = 127 '\\\\177'"
+    gdb_test "p ctable1\[128\]" " = 128 '\\\\200'"
+    gdb_test "p ctable1\[129\]" " = 129 '\\\\201'"
+    gdb_test "p ctable1\[130\]" " = 130 '\\\\202'"
+    gdb_test "p ctable1\[131\]" " = 131 '\\\\203'"
+    gdb_test "p ctable1\[132\]" " = 132 '\\\\204'"
+    gdb_test "p ctable1\[133\]" " = 133 '\\\\205'"
+    gdb_test "p ctable1\[134\]" " = 134 '\\\\206'"
+    gdb_test "p ctable1\[135\]" " = 135 '\\\\207'"
+    gdb_test "p ctable1\[136\]" " = 136 '\\\\210'"
+    gdb_test "p ctable1\[137\]" " = 137 '\\\\211'"
+    gdb_test "p ctable1\[138\]" " = 138 '\\\\212'"
+    gdb_test "p ctable1\[139\]" " = 139 '\\\\213'"
+    gdb_test "p ctable1\[140\]" " = 140 '\\\\214'"
+    gdb_test "p ctable1\[141\]" " = 141 '\\\\215'"
+    gdb_test "p ctable1\[142\]" " = 142 '\\\\216'"
+    gdb_test "p ctable1\[143\]" " = 143 '\\\\217'"
+    gdb_test "p ctable1\[144\]" " = 144 '\\\\220'"
+    gdb_test "p ctable1\[145\]" " = 145 '\\\\221'"
+    gdb_test "p ctable1\[146\]" " = 146 '\\\\222'"
+    gdb_test "p ctable1\[147\]" " = 147 '\\\\223'"
+    gdb_test "p ctable1\[148\]" " = 148 '\\\\224'"
+    gdb_test "p ctable1\[149\]" " = 149 '\\\\225'"
+    gdb_test "p ctable1\[150\]" " = 150 '\\\\226'"
+    gdb_test "p ctable1\[151\]" " = 151 '\\\\227'"
+    gdb_test "p ctable1\[152\]" " = 152 '\\\\230'"
+    gdb_test "p ctable1\[153\]" " = 153 '\\\\231'"
+    gdb_test "p ctable1\[154\]" " = 154 '\\\\232'"
+    gdb_test "p ctable1\[155\]" " = 155 '\\\\233'"
+    gdb_test "p ctable1\[156\]" " = 156 '\\\\234'"
+    gdb_test "p ctable1\[157\]" " = 157 '\\\\235'"
+    gdb_test "p ctable1\[158\]" " = 158 '\\\\236'"
+    gdb_test "p ctable1\[159\]" " = 159 '\\\\237'"
+    gdb_test "p ctable1\[160\]" " = 160 '\\\\240'"
+    gdb_test "p ctable1\[161\]" " = 161 '\\\\241'"
+    gdb_test "p ctable1\[162\]" " = 162 '\\\\242'"
+    gdb_test "p ctable1\[163\]" " = 163 '\\\\243'"
+    gdb_test "p ctable1\[164\]" " = 164 '\\\\244'"
+    gdb_test "p ctable1\[165\]" " = 165 '\\\\245'"
+    gdb_test "p ctable1\[166\]" " = 166 '\\\\246'"
+    gdb_test "p ctable1\[167\]" " = 167 '\\\\247'"
+    gdb_test "p ctable1\[168\]" " = 168 '\\\\250'"
+    gdb_test "p ctable1\[169\]" " = 169 '\\\\251'"
+    gdb_test "p ctable1\[170\]" " = 170 '\\\\252'"
+    gdb_test "p ctable1\[171\]" " = 171 '\\\\253'"
+    gdb_test "p ctable1\[172\]" " = 172 '\\\\254'"
+    gdb_test "p ctable1\[173\]" " = 173 '\\\\255'"
+    gdb_test "p ctable1\[174\]" " = 174 '\\\\256'"
+    gdb_test "p ctable1\[175\]" " = 175 '\\\\257'"
+    gdb_test "p ctable1\[176\]" " = 176 '\\\\260'"
+    gdb_test "p ctable1\[177\]" " = 177 '\\\\261'"
+    gdb_test "p ctable1\[178\]" " = 178 '\\\\262'"
+    gdb_test "p ctable1\[179\]" " = 179 '\\\\263'"
+    gdb_test "p ctable1\[180\]" " = 180 '\\\\264'"
+    gdb_test "p ctable1\[181\]" " = 181 '\\\\265'"
+    gdb_test "p ctable1\[182\]" " = 182 '\\\\266'"
+    gdb_test "p ctable1\[183\]" " = 183 '\\\\267'"
+    gdb_test "p ctable1\[184\]" " = 184 '\\\\270'"
+    gdb_test "p ctable1\[185\]" " = 185 '\\\\271'"
+    gdb_test "p ctable1\[186\]" " = 186 '\\\\272'"
+    gdb_test "p ctable1\[187\]" " = 187 '\\\\273'"
+    gdb_test "p ctable1\[188\]" " = 188 '\\\\274'"
+    gdb_test "p ctable1\[189\]" " = 189 '\\\\275'"
+    gdb_test "p ctable1\[190\]" " = 190 '\\\\276'"
+    gdb_test "p ctable1\[191\]" " = 191 '\\\\277'"
+    gdb_test "p ctable1\[192\]" " = 192 '\\\\300'"
+    gdb_test "p ctable1\[193\]" " = 193 '\\\\301'"
+    gdb_test "p ctable1\[194\]" " = 194 '\\\\302'"
+    gdb_test "p ctable1\[195\]" " = 195 '\\\\303'"
+    gdb_test "p ctable1\[196\]" " = 196 '\\\\304'"
+    gdb_test "p ctable1\[197\]" " = 197 '\\\\305'"
+    gdb_test "p ctable1\[198\]" " = 198 '\\\\306'"
+    gdb_test "p ctable1\[199\]" " = 199 '\\\\307'"
+    gdb_test "p ctable1\[200\]" " = 200 '\\\\310'"
+    gdb_test "p ctable1\[201\]" " = 201 '\\\\311'"
+    gdb_test "p ctable1\[202\]" " = 202 '\\\\312'"
+    gdb_test "p ctable1\[203\]" " = 203 '\\\\313'"
+    gdb_test "p ctable1\[204\]" " = 204 '\\\\314'"
+    gdb_test "p ctable1\[205\]" " = 205 '\\\\315'"
+    gdb_test "p ctable1\[206\]" " = 206 '\\\\316'"
+    gdb_test "p ctable1\[207\]" " = 207 '\\\\317'"
+    gdb_test "p ctable1\[208\]" " = 208 '\\\\320'"
+    gdb_test "p ctable1\[209\]" " = 209 '\\\\321'"
+    gdb_test "p ctable1\[210\]" " = 210 '\\\\322'"
+    gdb_test "p ctable1\[211\]" " = 211 '\\\\323'"
+    gdb_test "p ctable1\[212\]" " = 212 '\\\\324'"
+    gdb_test "p ctable1\[213\]" " = 213 '\\\\325'"
+    gdb_test "p ctable1\[214\]" " = 214 '\\\\326'"
+    gdb_test "p ctable1\[215\]" " = 215 '\\\\327'"
+    gdb_test "p ctable1\[216\]" " = 216 '\\\\330'"
+    gdb_test "p ctable1\[217\]" " = 217 '\\\\331'"
+    gdb_test "p ctable1\[218\]" " = 218 '\\\\332'"
+    gdb_test "p ctable1\[219\]" " = 219 '\\\\333'"
+    gdb_test "p ctable1\[220\]" " = 220 '\\\\334'"
+    gdb_test "p ctable1\[221\]" " = 221 '\\\\335'"
+    gdb_test "p ctable1\[222\]" " = 222 '\\\\336'"
+    gdb_test "p ctable1\[223\]" " = 223 '\\\\337'"
+    gdb_test "p ctable1\[224\]" " = 224 '\\\\340'"
+    gdb_test "p ctable1\[225\]" " = 225 '\\\\341'"
+    gdb_test "p ctable1\[226\]" " = 226 '\\\\342'"
+    gdb_test "p ctable1\[227\]" " = 227 '\\\\343'"
+    gdb_test "p ctable1\[228\]" " = 228 '\\\\344'"
+    gdb_test "p ctable1\[229\]" " = 229 '\\\\345'"
+    gdb_test "p ctable1\[230\]" " = 230 '\\\\346'"
+    gdb_test "p ctable1\[231\]" " = 231 '\\\\347'"
+    gdb_test "p ctable1\[232\]" " = 232 '\\\\350'"
+    gdb_test "p ctable1\[233\]" " = 233 '\\\\351'"
+    gdb_test "p ctable1\[234\]" " = 234 '\\\\352'"
+    gdb_test "p ctable1\[235\]" " = 235 '\\\\353'"
+    gdb_test "p ctable1\[236\]" " = 236 '\\\\354'"
+    gdb_test "p ctable1\[237\]" " = 237 '\\\\355'"
+    gdb_test "p ctable1\[238\]" " = 238 '\\\\356'"
+    gdb_test "p ctable1\[239\]" " = 239 '\\\\357'"
+    gdb_test "p ctable1\[240\]" " = 240 '\\\\360'"
+    gdb_test "p ctable1\[241\]" " = 241 '\\\\361'"
+    gdb_test "p ctable1\[242\]" " = 242 '\\\\362'"
+    gdb_test "p ctable1\[243\]" " = 243 '\\\\363'"
+    gdb_test "p ctable1\[244\]" " = 244 '\\\\364'"
+    gdb_test "p ctable1\[245\]" " = 245 '\\\\365'"
+    gdb_test "p ctable1\[246\]" " = 246 '\\\\366'"
+    gdb_test "p ctable1\[247\]" " = 247 '\\\\367'"
+    gdb_test "p ctable1\[248\]" " = 248 '\\\\370'"
+    gdb_test "p ctable1\[249\]" " = 249 '\\\\371'"
+    gdb_test "p ctable1\[250\]" " = 250 '\\\\372'"
+    gdb_test "p ctable1\[251\]" " = 251 '\\\\373'"
+    gdb_test "p ctable1\[252\]" " = 252 '\\\\374'"
+    gdb_test "p ctable1\[253\]" " = 253 '\\\\375'"
+    gdb_test "p ctable1\[254\]" " = 254 '\\\\376'"
+    gdb_test "p ctable1\[255\]" " = 255 '\\\\377'"
+}
+
+# Test interaction of the number of print elements to print and the
+# repeat count, set to the default of 10.
+
+proc test_print_repeats_10 {} {
+    global gdb_prompt
+
+    for { set x 1; } { $x <= 16 } { incr x; } {
+	gdb_test "set print elements $x" "" ""
+	for { set e 1; } { $e <= 16 } {incr e; } {
+	    set v [expr $e - 1];
+	    set command "p &ctable2\[${v}*16\]"
+	    if { $x < $e } {
+		set aval $x;
+	    } else {
+		set aval $e;
+	    }
+	    set xval [expr $x - $e];
+	    if { $xval < 0 } {
+		set xval 0;
+	    }
+	    if { $aval > 10 } {
+		set a "'a' <repeats $aval times>";
+		if { $xval > 0 } {
+		    set a "${a}, \\\"";
+		}
+	    } else {
+		set a "\\\"[string range "aaaaaaaaaaaaaaaa" 1 $aval]";
+		if { $xval > 10 } {
+		    set a "$a\\\", ";
+		}
+	    }
+	    set xstr "";
+	    if { $xval > 10 } {
+		set xstr "'X' <repeats $xval times>";
+	    } else {
+		if { $xval > 0 } {
+		    set xstr "[string range "XXXXXXXXXXXXXXXX" 1 $xval]\\\"";
+		} else {
+		    if { $aval <= 10 } {
+			set xstr "\\\"";
+		    }
+		}
+	    }
+	    if { $aval < 16 } {
+		set xstr "${xstr}\[.\]\[.\]\[.\]"
+	    }
+	    set string " = \[(\]unsigned char \[*\]\[)\] ${a}${xstr}";
+	    gdb_test "$command" "$string" "$command with print elements set to $x";
+	}
+    }
+}
+
+proc test_print_strings {} {
+    global gdb_prompt
+
+    # We accept "(unsigned char *) " before the string.  char vs. unsigned char
+    # is already tested elsewhere.
+
+    # Test that setting print elements unlimited doesn't completely suppress
+    # printing; this was a bug in older gdb's.
+    gdb_test "set print elements 0" "" ""
+    gdb_test "p teststring" \
+	" = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 0"
+    gdb_test "set print elements 1" "" ""
+    gdb_test "p teststring" \
+	" = (.unsigned char .. )?\"t\"\\.\\.\\." "p teststring with elements set to 1"
+    gdb_test "set print elements 5" "" ""
+    gdb_test "p teststring" \
+	" = (.unsigned char .. )?\"tests\"\\.\\.\\." "p teststring with elements set to 5"
+    gdb_test "set print elements 19" "" ""
+    gdb_test "p teststring" \
+	" = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 19"
+    gdb_test "set print elements 20" "" ""
+    gdb_test "p teststring" \
+	" = (.unsigned char .. )?\"teststring contents\"" "p teststring with elements set to 20"
+
+    gdb_test "set print elements 8" "" ""
+
+    gdb_test "p &ctable1\[0\]" \
+	" = \\(unsigned char \\*\\) \"\""
+    gdb_test "p &ctable1\[1\]" \
+	" = \\(unsigned char \\*\\) \"\\\\001\\\\002\\\\003\\\\004\\\\005\\\\006\\\\a\\\\b\"..."
+    gdb_test "p &ctable1\[1*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\b\\\\t\\\\n\\\\013\\\\f\\\\r\\\\016\\\\017\"..."
+    gdb_test "p &ctable1\[2*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\020\\\\021\\\\022\\\\023\\\\024\\\\025\\\\026\\\\027\"..."
+    gdb_test "p &ctable1\[3*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\030\\\\031\\\\032\\\\e\\\\034\\\\035\\\\036\\\\037\"..."
+    gdb_test "p &ctable1\[4*8\]" \
+	" = \\(unsigned char \\*\\) \" !\\\\\"#\\\$%&'\"..."
+    gdb_test "p &ctable1\[5*8\]" \
+	" = \\(unsigned char \\*\\) \"\\(\\)\\*\\+,-./\"..."
+    gdb_test "p &ctable1\[6*8\]" \
+	" = \\(unsigned char \\*\\) \"01234567\"..."
+    gdb_test "p &ctable1\[7*8\]" \
+	" = \\(unsigned char \\*\\) \"89:;<=>\\?\"..."
+    gdb_test "p &ctable1\[8*8\]" \
+	" = \\(unsigned char \\*\\) \"@ABCDEFG\"..."
+    gdb_test "p &ctable1\[9*8\]" \
+	" = \\(unsigned char \\*\\) \"HIJKLMNO\"..."
+    gdb_test "p &ctable1\[10*8\]" \
+	" = \\(unsigned char \\*\\) \"PQRSTUVW\"..."
+    gdb_test "p &ctable1\[11*8\]" \
+	" = \\(unsigned char \\*\\) \"XYZ\\\[\\\\\\\\\\\]\\^_\"..."
+    gdb_test "p &ctable1\[12*8\]" \
+	" = \\(unsigned char \\*\\) \"`abcdefg\"..."
+    gdb_test "p &ctable1\[13*8\]" \
+	" = \\(unsigned char \\*\\) \"hijklmno\"..."
+    gdb_test "p &ctable1\[14*8\]" \
+	" = \\(unsigned char \\*\\) \"pqrstuvw\"..."
+    gdb_test "p &ctable1\[15*8\]" \
+	" = \\(unsigned char \\*\\) \"xyz\[{|}\]+\\~\\\\177\"..."
+    gdb_test "p &ctable1\[16*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\200\\\\201\\\\202\\\\203\\\\204\\\\205\\\\206\\\\207\"..."
+    gdb_test "p &ctable1\[17*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\210\\\\211\\\\212\\\\213\\\\214\\\\215\\\\216\\\\217\"..."
+    gdb_test "p &ctable1\[18*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\220\\\\221\\\\222\\\\223\\\\224\\\\225\\\\226\\\\227\"..."
+    gdb_test "p &ctable1\[19*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\230\\\\231\\\\232\\\\233\\\\234\\\\235\\\\236\\\\237\"..."
+    gdb_test "p &ctable1\[20*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\240\\\\241\\\\242\\\\243\\\\244\\\\245\\\\246\\\\247\"..."
+    gdb_test "p &ctable1\[21*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\250\\\\251\\\\252\\\\253\\\\254\\\\255\\\\256\\\\257\"..."
+    gdb_test "p &ctable1\[22*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\260\\\\261\\\\262\\\\263\\\\264\\\\265\\\\266\\\\267\"..."
+    gdb_test "p &ctable1\[23*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\270\\\\271\\\\272\\\\273\\\\274\\\\275\\\\276\\\\277\"..."
+    gdb_test "p &ctable1\[24*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\300\\\\301\\\\302\\\\303\\\\304\\\\305\\\\306\\\\307\"..."
+    gdb_test "p &ctable1\[25*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\310\\\\311\\\\312\\\\313\\\\314\\\\315\\\\316\\\\317\"..."
+    gdb_test "p &ctable1\[26*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\320\\\\321\\\\322\\\\323\\\\324\\\\325\\\\326\\\\327\"..."
+    gdb_test "p &ctable1\[27*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\330\\\\331\\\\332\\\\333\\\\334\\\\335\\\\336\\\\337\"..."
+    gdb_test "p &ctable1\[28*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\340\\\\341\\\\342\\\\343\\\\344\\\\345\\\\346\\\\347\"..."
+    gdb_test "p &ctable1\[29*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\350\\\\351\\\\352\\\\353\\\\354\\\\355\\\\356\\\\357\"..."
+    gdb_test "p &ctable1\[30*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\360\\\\361\\\\362\\\\363\\\\364\\\\365\\\\366\\\\367\"..."
+    gdb_test "p &ctable1\[31*8\]" \
+	" = \\(unsigned char \\*\\) \"\\\\370\\\\371\\\\372\\\\373\\\\374\\\\375\\\\376\\\\377\"..."
+}
+
+proc test_print_int_arrays {} {
+    global gdb_prompt
+
+    gdb_test "set print elements 24" "" ""
+
+    gdb_test "p int1dim" \
+	" = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11}"
+    gdb_test "p int2dim" \
+	" = {{0, 1, 2, 3}, {4, 5, 6, 7}, {8, 9, 10, 11}}"
+    gdb_test "p int3dim" \
+	" = {{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}"
+    gdb_test "p int4dim" \
+	" = {{{{0, 1}, {2, 3}, {4, 5}}, {{6, 7}, {8, 9}, {10, 11}}}}"
+}
+
+proc test_artificial_arrays {} {
+    # Send \026@ instead of just @ in case the kill character is @.
+    gdb_test "p int1dim\[0\]\026@2" " = {0, 1}" {p int1dim[0]@2}
+    gdb_test "p int1dim\[0\]\026@2\026@3" \
+	"({{0, 1}, {2, 3}, {4, 5}}|\[Cc\]annot.*)" \
+	{p int1dim[0]@2@3}
+    gdb_test {p/x (short [])0x12345678} \
+	" = ({0x1234, 0x5678}|{0x5678, 0x1234})"
+}
+
+proc test_print_char_arrays {} {
+    global gdb_prompt
+    global hex
+
+    gdb_test "set print elements 24" "" ""
+    gdb_test "set print address on" "" ""
+
+    gdb_test "p arrays" \
+	" = {array1 = \"abc\", array2 = \"d\", array3 = \"e\", array4 = \"fg\", array5 = \"hij\"}"
+
+    gdb_test "p parrays"		" = \\(struct some_arrays \\*\\) $hex"
+    gdb_test "p parrays->array1"	" = \"abc\""
+    gdb_test "p &parrays->array1"	" = \\(unsigned char \\(\\*\\)\\\[4\\\]\\) $hex"
+    gdb_test "p parrays->array2"	" = \"d\""
+    gdb_test "p &parrays->array2"	" = \\(unsigned char \\(\\*\\)\\\[1\\\]\\) $hex"
+    gdb_test "p parrays->array3"	" = \"e\""
+    gdb_test "p &parrays->array3"	" = \\(unsigned char \\(\\*\\)\\\[1\\\]\\) $hex"
+    gdb_test "p parrays->array4"	" = \"fg\""
+    gdb_test "p &parrays->array4"	" = \\(unsigned char \\(\\*\\)\\\[2\\\]\\) $hex"
+    gdb_test "p parrays->array5"	" = \"hij\""
+    gdb_test "p &parrays->array5"	" = \\(unsigned char \\(\\*\\)\\\[4\\\]\\) $hex"
+
+    gdb_test "set print address off" "" ""
+}
+
+proc test_print_string_constants {} {
+    global gdb_prompt
+
+    gdb_test "set print elements 50" "" ""
+
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "This target can not call functions"
+	return
+    }
+
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p \"a string\""		" = \"a string\""
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p \"embedded \\000 null\"" " = \"embedded \\\\000 null\""
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p \"abcd\"\[2\]"	" = 99 'c'"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p sizeof (\"abcdef\")"	" = 7"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "ptype \"foo\""		" = char \\\[4\\\]"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p *\"foo\""		" = 102 'f'"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "ptype *\"foo\""		" = char"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p &*\"foo\""		" = \"foo\""
+    setup_xfail "*-*-*"
+    gdb_test "ptype &*\"foo\""	"type = char \\*"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "p (char *)\"foo\""	" = \"foo\""
+}
+
+proc test_print_array_constants {} {
+
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "This target can not call functions"
+	return
+    }
+
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print {'a','b','c'}"	" = \"abc\""
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print {0,1,2}"		" = {0, 1, 2}"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print {(long)0,(long)1,(long)2}"	" = {0, 1, 2}"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print {{0,1,2},{3,4,5}}"  " = {{0, 1, 2}, {3, 4, 5}}"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print {4,5,6}\[2\]"	" = 6"
+    setup_xfail "a29k-*-udi" 2416
+    gdb_test "print *&{4,5,6}\[1\]"	" = 5"
+}
+
+proc test_printf {} {
+    gdb_test "printf \"x=%d,y=%d,z=%d\\n\", 5, 6, 7" "x=5,y=6,z=7"
+    gdb_test "printf \"string=%.4sxx\\n\", teststring" "string=testxx"
+    gdb_test "printf \"string=%sxx\\n\", teststring" \
+	"string=teststring contentsxx"
+
+    gdb_test "printf \"%f is fun\\n\", 1.0" "1\.0+ is fun"
+
+    # Test mixing args of different sizes.
+    gdb_test "printf \"x=%d,y=%f,z=%d\\n\", 5, 6.0, 7" "x=5,y=6\.0+,z=7"
+    gdb_test "printf \"%x %f, %c %x, %x, %f\\n\", 0xbad, -99.541, 'z',\
+0xfeedface, 0xdeadbeef, 5.0" "bad -99.54\[0-9\]+, z feedface, deadbeef, 5.0+"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "print \$pc" "No registers\\."
+# FIXME: should also test "print $pc" when there is an execfile but no
+# remote debugging target, process or corefile.
+
+gdb_load ${binfile}
+
+gdb_test "set print sevenbit-strings" ""
+gdb_test "set print address off" "" ""
+gdb_test "set width 0" ""
+
+if [set_lang_c] then {
+    gdb_test "p ctable1\[120\]" "120 'x'" "p ctable1\[120\] #1"
+
+    if [runto_main] then {
+	test_integer_literals_accepted
+	test_integer_literals_rejected
+	test_character_literals_accepted
+	test_print_all_chars
+	test_print_repeats_10
+	test_print_strings
+	test_print_int_arrays
+	test_artificial_arrays
+	test_print_char_arrays
+# We used to do the runto main here.
+	test_print_string_constants
+	test_print_array_constants
+	test_printf
+    }
+} else {
+    fail "C print command tests suppressed"
+}
diff --git a/gdb/testsuite/gdb.base/ptype.c b/gdb/testsuite/gdb.base/ptype.c
new file mode 100644
index 0000000..8013435
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ptype.c
@@ -0,0 +1,313 @@
+/*
+ *	Test file with lots of different types, for testing the
+ *	"ptype" command.
+ */
+
+/*
+ *	First the basic C types.
+ */
+
+#if !defined (__STDC__) && !defined (_AIX)
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+/*
+ *	Now some derived types, which are arrays, functions-returning,
+ *	pointers, structures, unions, and enumerations.
+ */
+
+/**** arrays *******/
+
+char		v_char_array[2];
+signed char	v_signed_char_array[2];
+unsigned char	v_unsigned_char_array[2];
+
+short		v_short_array[2];
+signed short	v_signed_short_array[2];
+unsigned short	v_unsigned_short_array[2];
+
+int		v_int_array[2];
+signed int	v_signed_int_array[2];
+unsigned int	v_unsigned_int_array[2];
+
+long		v_long_array[2];
+signed long	v_signed_long_array[2];
+unsigned long	v_unsigned_long_array[2];
+
+float		v_float_array[2];
+double		v_double_array[2];
+
+/* PR 3742 */
+typedef char t_char_array[];
+
+/**** pointers *******/
+
+char		*v_char_pointer;
+signed char	*v_signed_char_pointer;
+unsigned char	*v_unsigned_char_pointer;
+
+short		*v_short_pointer;
+signed short	*v_signed_short_pointer;
+unsigned short	*v_unsigned_short_pointer;
+
+int		*v_int_pointer;
+signed int	*v_signed_int_pointer;
+unsigned int	*v_unsigned_int_pointer;
+
+long		*v_long_pointer;
+signed long	*v_signed_long_pointer;
+unsigned long	*v_unsigned_long_pointer;
+
+float		*v_float_pointer;
+double		*v_double_pointer;
+
+/**** structs *******/
+
+struct t_struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct1;
+
+struct t_struct *v_t_struct_p;
+
+struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct2;
+
+/* typedef'd struct without a tag.  */
+typedef struct {
+  double v_double_member;
+  int v_int_member;
+} t_struct3;
+/* GCC seems to want a variable of this type, or else it won't put out
+   a symbol.  */
+t_struct3 v_struct3;
+
+/**** unions *******/
+
+union t_union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union;
+
+union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union2;
+
+/* typedef'd union without a tag.  */
+typedef union {
+  double v_double_member;
+  int v_int_member;
+} t_union3;
+/* GCC seems to want a variable of this type, or else it won't put out
+   a symbol.  */
+t_union3 v_union3;
+
+/*** Functions returning type ********/
+
+char		v_char_func () { return(0); }
+signed char	v_signed_char_func () { return (0); }
+unsigned char	v_unsigned_char_func () { return (0); }
+
+short		v_short_func () { return (0); }
+signed short	v_signed_short_func () { return (0); }
+unsigned short	v_unsigned_short_func () { return (0); }
+
+int		v_int_func () { return (0); }
+signed int	v_signed_int_func () { return (0); }
+unsigned int	v_unsigned_int_func () { return (0); }
+
+long		v_long_func () { return (0); }
+signed long	v_signed_long_func () { return (0); }
+unsigned long	v_unsigned_long_func () { return (0); }
+
+float		v_float_func () { return (0.0); }
+double		v_double_func () { return (0.0); }
+
+/**** Some misc more complicated things *******/
+
+struct link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} *s_link;
+
+union tu_link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} u_link;
+
+struct outer_struct {
+	int outer_int;
+	struct inner_struct {
+		int inner_int;
+		long inner_long;
+	}inner_struct_instance;
+	union inner_union {
+		int inner_union_int;
+		long inner_union_long;
+	}inner_union_instance;
+	long outer_long;
+} nested_su;
+
+/**** Enumerations *******/
+
+enum 
+/* Work around the bug for compilers which don't put out the right stabs.  */
+#if __GNUC__ < 2 && !defined (_AIX)
+primary1_tag
+#endif
+{red1, green1, blue1} primary1;
+
+enum {red, green, blue} primary;
+enum colors {yellow, purple, pink} nonprimary;
+
+enum {chevy, ford} clunker;
+enum cars {bmw, porsche} sportscar;
+
+typedef enum {FALSE, TRUE} boolean;
+boolean v_boolean;
+typedef enum bvals {false, true} boolean2;
+boolean2 v_boolean2;
+
+enum misordered {two = 2, one = 1, zero = 0, three = 3};
+
+/***********/
+
+main ()
+{
+  /* Ensure that malloc is a pointer type; avoid use of "void" and any include files. */
+  extern char *malloc();
+
+  /* Seems like we need a variable of this type to get the type to be put
+     in the executable, at least for AIX xlc.  */
+  enum misordered v_misordered = three;
+
+  /* Some of the tests in ptype.exp require invoking malloc, so make
+     sure it is linked in to this program.  */
+  v_char_pointer = (char *) malloc (1);
+
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  /* Some linkers (e.g. on AIX) remove unreferenced variables,
+     so make sure to reference them. */
+  primary = blue;
+  primary1 = blue1;
+  nonprimary = pink;
+  sportscar = porsche;
+  clunker = ford;
+  v_struct1.v_int_member = 5;
+  v_struct2.v_int_member = 6;
+  v_struct3.v_int_member = 7;
+
+  v_char = 0;
+  v_signed_char = 0;
+  v_unsigned_char = 0;
+
+  v_short = 0;
+  v_signed_short = 0;
+  v_unsigned_short = 0;
+
+  v_int = 0;
+  v_signed_int = 0;
+  v_unsigned_int = 0;
+
+  v_long = 0;
+  v_signed_long = 0;
+  v_unsigned_long = 0;
+
+  v_float = 0;
+  v_double = 0;
+
+  v_char_array[0] = 0;
+  v_signed_char_array[0] = 0;
+  v_unsigned_char_array[0] = 0;
+
+  v_short_array[0] = 0;
+  v_signed_short_array[0] = 0;
+  v_unsigned_short_array[0] = 0;
+
+  v_int_array[0] = 0;
+  v_signed_int_array[0] = 0;
+  v_unsigned_int_array[0] = 0;
+
+  v_long_array[0] = 0;
+  v_signed_long_array[0] = 0;
+  v_unsigned_long_array[0] = 0;
+
+  v_float_array[0] = 0;
+  v_double_array[0] = 0;
+
+  v_char_pointer = 0;
+  v_signed_char_pointer = 0;
+  v_unsigned_char_pointer = 0;
+
+  v_short_pointer = 0;
+  v_signed_short_pointer = 0;
+  v_unsigned_short_pointer = 0;
+
+  v_int_pointer = 0;
+  v_signed_int_pointer = 0;
+  v_unsigned_int_pointer = 0;
+
+  v_long_pointer = 0;
+  v_signed_long_pointer = 0;
+  v_unsigned_long_pointer = 0;
+
+  v_float_pointer = 0;
+  v_double_pointer = 0;
+
+  nested_su.outer_int = 0;
+  v_t_struct_p = 0;
+
+  v_boolean = FALSE;
+  v_boolean2 = false;
+}
diff --git a/gdb/testsuite/gdb.base/ptype.exp b/gdb/testsuite/gdb.base/ptype.exp
new file mode 100644
index 0000000..1ef6771
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ptype.exp
@@ -0,0 +1,532 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "ptype"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Test ptype of unnamed enumeration members before any action causes
+# the partial symbol table to be expanded to full symbols.  This fails
+# with stabs compilers which fail to use a nameless stab (such as
+# pre-2.4.5 versions of gcc and most non-gcc compilers).
+
+send_gdb "ptype red1\n"
+gdb_expect {
+    -re "type = enum primary1_tag \{red1, green1, blue1\}.*$gdb_prompt $"\
+	{
+	    # The workaround is in effect.  As this is a compiler, not GDB,
+	    # bug, we'll make it a PASS but perhaps it should be an XFAIL.
+	    pass "ptype unnamed enumeration member (worked around)"
+	}
+    -re "type = enum \{red1, green1, blue1\}.*$gdb_prompt $"\
+			{ pass "ptype unnamed enumeration member" }
+    -re ".*$gdb_prompt $"	{ fail "ptype unnamed enumeration member" }
+    timeout		{ fail "(timeout) ptype unnamed enumeration member" }
+}
+
+#
+# test ptype command with structures
+#
+# Here and elsewhere, we accept
+# "long", "long int", or "int" for long variables (whatis.exp already
+# has an XFAIL for "int" (Sun cc bug), so no need to fail it here).
+gdb_test "ptype struct t_struct" "type = struct t_struct \{.*\[\r\n\]    (unsigned |)char v_char_member;.*\[\r\n\]    (short|short int) v_short_member;.*\[\r\n\]    int v_int_member;.*\[\r\n\]    (long|long int|int) v_long_member;.*\[\r\n\]    float v_float_member;.*\[\r\n\]    double v_double_member;.*\[\r\n\]\}.*" "ptype structure" 
+
+
+# Test the equivalence between '.' and '->' for struct member references.
+
+if [gdb_test "ptype v_struct1.v_float_member"	"type = float"]<0 then {
+    return -1
+}
+if [gdb_test "ptype v_struct1->v_float_member"	"type = float"]<0 then {
+    return -1
+}
+if [gdb_test "ptype v_t_struct_p.v_float_member"	"type = float"]<0 then {
+    return -1
+}
+if [gdb_test "ptype v_t_struct_p->v_float_member"	"type = float"]<0 then {
+    return -1
+}
+
+
+# IBM's xlc puts out bogus stabs--the stuff field is type 42,
+# which isn't defined.
+
+gdb_test "ptype struct link" "type = struct link \{.*\[\r\n\]    struct link \[*\]next;.*\[\r\n\]    struct link \[*(\]+linkfunc\[)(\]+(struct link \[*\], int\[)\]|);.*\[\r\n\]    struct t_struct stuff.1..2..3.;.*\[\r\n\]\}.*" "ptype linked list structure" 
+
+#
+# test ptype command with unions
+#
+gdb_test "ptype union t_union" "type = union t_union \{.*\[\r\n\]    (unsigned |)char v_char_member;.*\[\r\n\]    (short|short int) v_short_member;.*\[\r\n\]    int v_int_member;.*\[\r\n\]    (long|long int|int) v_long_member;.*\[\r\n\]    float v_float_member;.*\[\r\n\]    double v_double_member;.*\[\r\n\]\}.*" "ptype union" 
+
+# IBM's xlc puts out bogus stabs--the stuff field is type 42,
+# which isn't defined.
+gdb_test "ptype union tu_link" "type = union tu_link .*\[\r\n\]    struct link \[*\]next;.*\[\r\n\]    struct link \[(\*\]+linkfunc\[)(\]+(struct link \[*\], int\[)\]|);.*\[\r\n\]    struct t_struct stuff.1..2..3.;.*\[\r\n\]\}.*" "ptype linked list union" 
+
+#
+# test ptype command with enums
+#
+
+gdb_test "ptype primary" "type = enum .red, green, blue.*" "ptype unnamed enumeration" 
+
+gdb_test "ptype enum colors" "type = enum colors \{yellow, purple, pink\}.*" "ptype named enumeration" 
+
+
+#
+# test ptype command with enums as typedef
+#
+gdb_test "ptype boolean" "type = enum \{FALSE, TRUE\}.*" "ptype unnamed typedef'd enumeration" 
+
+# And check that whatis shows the name, not "enum {...}".
+# This probably fails for all DWARF 1 cases, so assume so for now. -fnf
+# The problem with xlc is that the stabs look like
+#   :t51=eFALSE:0,TRUE:1,;
+#   boolean:t55=51
+#   v_boolean:G51
+# GDB's behavior is correct; the type which the variable is defined
+# as (51) doesn't have a name.  Only 55 has a name.
+
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "i*86-*-sysv4*" }
+setup_xfail_format "DWARF 1"
+gdb_test "whatis v_boolean" "type = boolean" \
+  "whatis unnamed typedef'd enum (compiler bug in IBM's xlc)"
+
+# Same thing with struct and union.
+gdb_test "ptype t_struct3" "type = struct \{.*
+ *double v_double_member;.*
+ *int v_int_member;.*\}" "printing typedef'd struct"
+
+gdb_test "ptype t_union3" "type = union \{.*
+ *double v_double_member;.*
+ *int v_int_member;.*\}" "printing typedef'd union"
+
+gdb_test "ptype enum bvals" "type = enum bvals \{false, true\}.*" "ptype named typedef'd enumf'd enum" 
+
+#
+# test ptype command with out-of-order enum values
+#
+gdb_test "ptype enum misordered" "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*" "ptype misordered enumeration" 
+
+#
+# test ptype command with a named enum's value
+#
+gdb_test "ptype three" "type = enum misordered \{two = 2, one = 1, zero = 0, three = 3\}.*" "ptype named enumeration member" 
+
+gdb_test "ptype red" "type = enum \{red, green, blue\}.*" "ptype unnamed enumeration member #2" 
+
+#
+# test ptype command with basic C types
+#
+# I've commented most of this out because it duplicates tests in whatis.exp.
+# I've just left in a token test or 2 which is designed to test that ptype 
+# acts like whatis for basic types.  If it is thought to be necessary to
+# test both whatis and ptype for all the types, the tests should be
+# merged into whatis.exp, or else maintenance will be a royal pain -kingdon
+#setup_xfail "i960-*-*" 1821
+#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#send "ptype v_char\n"
+#gdb_expect {
+#    -re "type = char.*$gdb_prompt $"	{ pass "ptype char" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype char" }
+#    timeout		{ fail "(timeout) ptype char" }
+#}
+#
+#
+#setup_xfail "mips-*-*" "a29k-*-*"
+#send "ptype v_signed_char\n"
+#gdb_expect {
+#    -re "type = signed char.*$gdb_prompt $"	{ pass "ptype signed char" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed char" }
+#    timeout		{ fail "(timeout) ptype signed char" }
+#}
+#
+#
+#send "ptype v_unsigned_char\n"
+#gdb_expect {
+#    -re "type = unsigned char.*$gdb_prompt $"	{ pass "ptype unsigned char" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned char" }
+#    timeout		{ fail "(timeout) ptype unsigned char" }
+#}
+
+gdb_test "ptype v_short" "type = short(| int).*" "ptype short" 
+
+#send "ptype v_signed_short\n"
+#gdb_expect {
+#    -re "type = short.*$gdb_prompt $"	{ pass "ptype signed short" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed short" }
+#    timeout		{ fail "(timeout) ptype signed short" }
+#}
+#
+#
+#send "ptype v_unsigned_short\n"
+#gdb_expect {
+#    -re "type = unsigned short.*$gdb_prompt $"	{ pass "ptype unsigned short" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned short" }
+#    timeout		{ fail "(timeout) ptype unsigned short" }
+#}
+
+
+gdb_test "ptype v_int" "type = int.*" "ptype int" 
+
+#send "ptype v_signed_int\n"
+#gdb_expect {
+#    -re "type = int.*$gdb_prompt $"	{ pass "ptype signed int" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed int" }
+#    timeout		{ fail "(timeout) ptype signed int" }
+#}
+#
+#
+#send "ptype v_unsigned_int\n"
+#gdb_expect {
+#    -re "type = unsigned int.*$gdb_prompt $"	{ pass "ptype unsigned int" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned int" }
+#    timeout		{ fail "(timeout) ptype unsigned int" }
+#}
+#
+#
+#send "ptype v_long\n"
+#gdb_expect {
+#    -re "type = long.*$gdb_prompt $"	{ pass "ptype long" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype long" }
+#    timeout		{ fail "(timeout) ptype long" }
+#}
+#
+#
+#send "ptype v_signed_long\n"
+#gdb_expect {
+#    -re "type = long.*$gdb_prompt $"	{ pass "ptype signed long" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed long" }
+#    timeout		{ fail "(timeout) ptype signed long" }
+#}
+#
+#
+#send "ptype v_unsigned_long\n"
+#gdb_expect {
+#    -re "type = unsigned long.*$gdb_prompt $"	{ pass "ptype unsigned long" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned long" }
+#    timeout		{ fail "(timeout) ptype unsigned long" }
+#}
+#
+#
+#send "ptype v_float\n"
+#gdb_expect {
+#    -re "type = float.*$gdb_prompt $"	{ pass "ptype float" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype float" }
+#    timeout		{ fail "(timeout) ptype float" }
+#}
+#
+#
+#send "ptype v_double\n"
+#gdb_expect {
+#    -re "type = double.*$gdb_prompt $"	{ pass "ptype double" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype double" }
+#    timeout		{ fail "(timeout) ptype double" }
+#}
+
+
+#
+# test ptype command with arrays
+#
+#setup_xfail "i960-*-*" 1821
+#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#send "ptype v_char_array\n"
+#gdb_expect {
+#    -re "type = char .2..*$gdb_prompt $"	{ pass "ptype char array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype char array" }
+#    timeout		{ fail "(timeout) ptype char array" }
+#}
+#
+#
+#setup_xfail "mips-*-*" "a29k-*-*"
+#send "ptype v_signed_char_array\n"
+#gdb_expect {
+#    -re "type = (|signed )char .2..*$gdb_prompt $"	{ pass "ptype signed char array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed char array" }
+#    timeout		{ fail "(timeout) ptype signed char array" }
+#}
+#
+#
+#send "ptype v_unsigned_char_array\n"
+#gdb_expect {
+#    -re "type = unsigned char .2..*$gdb_prompt $"	{ pass "ptype unsigned char array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned char array" }
+#    timeout		{ fail "(timeout) ptype unsigned char array" }
+#}
+#
+#
+#
+#send "ptype v_int_array\n"
+#gdb_expect {
+#    -re "type = int .2..*$gdb_prompt $"	{ pass "ptype int array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype int array" }
+#    timeout		{ fail "(timeout) ptype int array" }
+#}
+#
+#
+#send "ptype v_signed_int_array\n"
+#gdb_expect {
+#    -re "type = int .2..*$gdb_prompt $"	{ pass "ptype signed int array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed int array" }
+#    timeout		{ fail "(timeout) ptype signed int array" }
+#}
+#
+#
+#send "ptype v_unsigned_int_array\n"
+#gdb_expect {
+#    -re "type = unsigned int .2..*$gdb_prompt $"	{ pass "ptype unsigned int array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned int array" }
+#    timeout		{ fail "(timeout) ptype unsigned int array" }
+#}
+#
+#
+#send "ptype v_long_array\n"
+#gdb_expect {
+#    -re "type = (long|int|long int) .2..*$gdb_prompt $"	{ 
+#	pass "ptype long array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype long array" }
+#    timeout		{ fail "(timeout) ptype long array" }
+#}
+#
+#
+#send "ptype v_signed_long_array\n"
+#gdb_expect {
+#    -re "type = (long|int|long int) .2..*$gdb_prompt $"	{ 
+#	pass "ptype signed long array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed long array" }
+#    timeout		{ fail "(timeout) ptype signed long array" }
+#}
+#
+#
+#send "ptype v_unsigned_long_array\n"
+#gdb_expect {
+#    -re "type = unsigned long .2..*$gdb_prompt $"	{ pass "ptype unsigned long array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned long array" }
+#    timeout		{ fail "(timeout) ptype unsigned long array" }
+#}
+#
+#
+#send "ptype v_float_array\n"
+#gdb_expect {
+#    -re "type = float .2..*$gdb_prompt $"	{ pass "ptype float array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype float array" }
+#    timeout		{ fail "(timeout) ptype float array" }
+#}
+#
+#
+#send "ptype v_double_array\n"
+#gdb_expect {
+#    -re "type = double .2..*$gdb_prompt $"	{ pass "ptype double array" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype double array" }
+#    timeout		{ fail "(timeout) ptype double array" }
+#}
+#
+
+if {!$gcc_compiled} then { setup_xfail "rs6000-*-*" "i*86-*-sysv4*" }
+setup_xfail_format "DWARF 1"
+gdb_test "ptype t_char_array" "type = (|unsigned )char \\\[0?\\\]"
+
+#
+##
+## test ptype command with pointers
+##
+#setup_xfail "i960-*-*" 1821
+#setup_xfail "mips-idt-*" "mips-sgi-*" "a29k-*-*"
+#send "ptype v_char_pointer\n"
+#gdb_expect {
+#    -re "type = char \*.*$gdb_prompt $"	{ pass "ptype char pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype char pointer" }
+#    timeout		{ fail "(timeout) ptype char pointer" }
+#}
+#
+#
+#setup_xfail "mips-*-*" "a29k-*-*"
+#send "ptype v_signed_char_pointer\n"
+#gdb_expect {
+#    -re "type = (|signed )char \*.*$gdb_prompt $"
+#	{ pass "ptype signed char pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed char pointer" }
+#    timeout		{ fail "(timeout) ptype signed char pointer" }
+#}
+#
+#
+#send "ptype v_unsigned_char_pointer\n"
+#gdb_expect {
+#    -re "type = unsigned char \*.*$gdb_prompt $"	{ pass "ptype unsigned char pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned char pointer" }
+#    timeout		{ fail "(timeout) ptype unsigned char pointer" }
+#}
+#
+#
+#send "ptype v_short_pointer\n"
+#gdb_expect {
+#    -re "type = (short|short int) \*.*$gdb_prompt $"	{ pass "ptype short pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype short pointer" }
+#    timeout		{ fail "(timeout) ptype short pointer" }
+#}
+#
+#
+#send "ptype v_signed_short_pointer\n"
+#gdb_expect {
+#    -re "type = short \*.*$gdb_prompt $"	{ pass "ptype signed short pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed short pointer" }
+#    timeout		{ fail "(timeout) ptype signed short pointer" }
+#}
+#
+#
+#send "ptype v_unsigned_short_pointer\n"
+#gdb_expect {
+#    -re "type = unsigned short \*.*$gdb_prompt $"	{ pass "ptype unsigned short pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned short pointer" }
+#    timeout		{ fail "(timeout) ptype unsigned short pointer" }
+#}
+#
+#
+#send "ptype v_int_pointer\n"
+#gdb_expect {
+#    -re "type = int \*.*$gdb_prompt $"	{ pass "ptype int pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype int pointer" }
+#    timeout		{ fail "(timeout) ptype int pointer" }
+#}
+#
+#
+#send "ptype v_signed_int_pointer\n"
+#gdb_expect {
+#    -re "type = int \*.*$gdb_prompt $"	{ pass "ptype signed int pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed int pointer" }
+#    timeout		{ fail "(timeout) ptype signed int pointer" }
+#}
+#
+#
+#send "ptype v_unsigned_int_pointer\n"
+#gdb_expect {
+#    -re "type = unsigned int \*.*$gdb_prompt $"	{ pass "ptype unsigned int pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned int pointer" }
+#    timeout		{ fail "(timeout) ptype unsigned int pointer" }
+#}
+#
+#
+#send "ptype v_long_pointer\n"
+#gdb_expect {
+#    -re "type = long \*.*$gdb_prompt $"	{ pass "ptype long pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype long pointer" }
+#    timeout		{ fail "(timeout) ptype long pointer" }
+#}
+#
+#
+#send "ptype v_signed_long_pointer\n"
+#gdb_expect {
+#    -re "type = long \*.*$gdb_prompt $"	{ pass "ptype signed long pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype signed long pointer" }
+#    timeout		{ fail "(timeout) ptype signed long pointer" }
+#}
+#
+#
+#send "ptype v_unsigned_long_pointer\n"
+#gdb_expect {
+#    -re "type = unsigned long \*.*$gdb_prompt $"	{ pass "ptype unsigned long pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype unsigned long pointer" }
+#    timeout		{ fail "(timeout) ptype unsigned long pointer" }
+#}
+#
+#
+#send "ptype v_float_pointer\n"
+#gdb_expect {
+#    -re "type = float \*.*$gdb_prompt $"	{ pass "ptype float pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype float pointer" }
+#    timeout		{ fail "(timeout) ptype float pointer" }
+#}
+#
+#
+#send "ptype v_double_pointer\n"
+#gdb_expect {
+#    -re "type = double \*.*$gdb_prompt $"	{ pass "ptype double pointer" }
+#    -re ".*$gdb_prompt $"	{ fail "ptype double pointer" }
+#    timeout		{ fail "(timeout) ptype double pointer" }
+#}
+
+#
+# test ptype command with nested structure and union
+#
+gdb_test "ptype struct outer_struct" "type = struct outer_struct \{.*\[\r\n\]    int outer_int;.*\[\r\n\]    struct inner_struct inner_struct_instance;.*\[\r\n\]    union inner_union inner_union_instance;.*\[\r\n\]    (long|long int|int) outer_long;.*\[\r\n\]\}.*" "ptype outer structure" 
+
+gdb_test "ptype struct inner_struct" "type = struct inner_struct \{.*\[\r\n\]    int inner_int;.*\[\r\n\]    (long|long int|int) inner_long;.*\[\r\n\]\}.*" "ptype inner structure" 
+
+gdb_test "ptype union inner_union" "type = union inner_union \{.*\[\r\n\]    int inner_union_int;.*\[\r\n\]    (long|long int|int) inner_union_long;.*\[\r\n\]\}.*" "ptype inner union" 
+
+gdb_test "ptype nested_su" "type = struct outer_struct \{.*\[\r\n\]    int outer_int;.*\[\r\n\]    struct inner_struct inner_struct_instance;.*\[\r\n\]    union inner_union inner_union_instance;.*\[\r\n\]    (long|long int|int) outer_long;.*\[\r\n\]\}.*" "ptype nested structure" 
+
+gdb_test "ptype nested_su.outer_int" "type = int.*" "ptype outer int" 
+
+gdb_test "ptype nested_su.inner_struct_instance" "type = struct inner_struct \{.*\[\r\n\]    int inner_int;.*\[\r\n\]    (long|long int|int) inner_long;.*\[\r\n\]\}.*" "ptype nested structure #2" 
+
+gdb_test "ptype nested_su.inner_struct_instance.inner_int" "type = int.*" "ptype inner int" 
+
+gdb_test "ptype nested_su.inner_union_instance" "type = union inner_union \{.*\[\r\n\]    int inner_union_int;.*\[\r\n\]    (long|long int|int) inner_union_long;.*\[\r\n\]\}.*" "ptype nested union" 
+
+# Test printing type of string constants and array constants, but
+# requires a running process.  These call malloc, and can take a long
+# time to execute over a slow serial link, so increase the timeout.
+
+# UDI can't do this (PR 2416).  XFAIL is not suitable, because attempting
+# the operation causes a slow painful death rather than a nice simple failure.
+
+if [runto_main] then {
+
+  get_debug_format
+  if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+  }
+
+  gdb_test "ptype \"abc\""	"type = char \\\[4\\\]"
+  gdb_test "ptype {'a','b','c'}"	"type = char \\\[3\\\]"
+  gdb_test "ptype {0,1,2}"		"type = int \\\[3\\\]"
+  gdb_test "ptype {(long)0,(long)1,(long)2}"	  "type = long \\\[3\\\]"
+  gdb_test "ptype {(float)0,(float)1,(float)2}" "type = float \\\[3\\\]"
+  gdb_test "ptype {{0,1,2},{3,4,5}}"	"type = int \\\[2\\\]\\\[3\\\]"
+  gdb_test "ptype {4,5,6}\[2\]"	"type = int"
+  gdb_test "ptype *&{4,5,6}\[1\]"	"type = int"
+}
diff --git a/gdb/testsuite/gdb.base/radix.exp b/gdb/testsuite/gdb.base/radix.exp
new file mode 100644
index 0000000..f81bde2
--- /dev/null
+++ b/gdb/testsuite/gdb.base/radix.exp
@@ -0,0 +1,201 @@
+# Copyright (C) 1993, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+proc test_input_radix_2 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #1"
+    gdb_test "set input-radix 2" \
+	"Input radix now set to decimal 2, hex 2, octal 2."
+    gdb_test "show radix" \
+	"Input radix set to decimal 2, hex 2, octal 2.\r\nOutput radix set to decimal 10, hex a, octal 12." \
+	"show radix #1"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"2"
+    gdb_test "p -101"		"-5"
+    gdb_test "p 101"		"5"
+    gdb_test "p 10101"		"21"
+    gdb_test "p 4"		"Invalid number \"4\"\\."
+    gdb_test "p -2"		"Invalid number \"2\"\\."
+}
+
+# Test input radix 3 (an non-typical radix)
+
+proc test_input_radix_3 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #2"
+    gdb_test "set input-radix 3" \
+	"Input radix now set to decimal 3, hex 3, octal 3."
+    gdb_test "show radix" \
+	"Input radix set to decimal 3, hex 3, octal 3.\r\nOutput radix set to decimal 10, hex a, octal 12." \
+	"show radix #2"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"3"
+    gdb_test "p 0"		"0"
+    gdb_test "p 1"		"1"
+    gdb_test "p 2"		"2"
+    gdb_test "p 10"		"3"
+    gdb_test "p 20"		"6"
+    gdb_test "p 100"		"9"
+    gdb_test "p -100"		"-9"
+    gdb_test "p 3"		"Invalid number \"3\"."
+    gdb_test "p 30"		"Invalid number \"30\"."
+}
+
+proc test_input_radix_8 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #3"
+    gdb_test "set input-radix 8" \
+	"Input radix now set to decimal 8, hex 8, octal 10."
+    gdb_test "show radix" \
+	"Input radix set to decimal 8, hex 8, octal 10.\r\nOutput radix set to decimal 10, hex a, octal 12." \
+	"set radix #3"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"8"
+    gdb_test "p 20"		"16"
+    gdb_test "p -20"		"-16"
+    gdb_test "p 100"		"64"
+    gdb_test "p 8"		"Invalid number \"8\"."
+    gdb_test "p -9"		"Invalid number \"9\"."
+}
+
+proc test_input_radix_10 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #4"
+    gdb_test "set input-radix 10" \
+	"Input radix now set to decimal 10, hex a, octal 12."
+    gdb_test "show radix" \
+	"Input and output radices set to decimal 10, hex a, octal 12." \
+	"show radix #4"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"10"
+    gdb_test "p -12"		"-12"
+}
+
+proc test_input_radix_16 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #5"
+    gdb_test "set input-radix 16" \
+	"Input radix now set to decimal 16, hex 10, octal 20."
+    gdb_test "show radix" \
+	"Input radix set to decimal 16, hex 10, octal 20.\r\nOutput radix set to decimal 10, hex a, octal 12." \
+	"show radix #5"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"16"
+    gdb_test "p 100"		"256"
+}
+
+proc test_output_radix_8 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #6"
+    gdb_test "set output-radix 8" \
+	"Output radix now set to decimal 8, hex 8, octal 10."
+    gdb_test "show radix" \
+	"Input radix set to decimal 10, hex a, octal 12.\r\nOutput radix set to decimal 8, hex 8, octal 10." \
+	"show radix #6"
+    gdb_test "p 010"		"010"
+    # FIXME:  If gdb can't handle float printing in different radices, it
+    # should at least warn once the first time that is attempted.
+    setup_xfail "*-*-*"
+    gdb_test "p 20."		"24"	"Float printing when output radix is 8"
+    gdb_test "p (int) 20."	"24"
+    gdb_test "p 0xf"		"17"
+    gdb_test "p 10"		"12"
+    gdb_test "p 100"		"144"
+}
+
+proc test_output_radix_10 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #7"
+    gdb_test "set output-radix 10" \
+	"Output radix now set to decimal 10, hex a, octal 12."
+    gdb_test "show radix" \
+	"Input and output radices set to decimal 10, hex a, octal 12." \
+	"show radix #7"
+    gdb_test "p 010"		"8"
+    gdb_test "p 20."		"20"
+    gdb_test "p (int) 20."	"20"
+    gdb_test "p 0xf"		"15"
+    gdb_test "p 10"		"10"
+    gdb_test "p 100"		"100"
+}
+
+proc test_output_radix_16 {} {
+    gdb_test "set radix" \
+	"Input and output radices now set to decimal 10, hex a, octal 12." \
+	"set radix #8"
+    gdb_test "set output-radix 16" \
+	"Output radix now set to decimal 16, hex 10, octal 20."
+    gdb_test "show radix" \
+	"Input radix set to decimal 10, hex a, octal 12.\r\nOutput radix set to decimal 16, hex 10, octal 20." \
+	"show radix #8"
+    gdb_test "p 010"		"8"
+    # FIXME:  If gdb can't handle float printing in different radices, it
+    # should at least warn once the first time that is attempted.
+    setup_xfail "*-*-*"
+    gdb_test "p 20."		"14"	"Float printing when output radix is 16"
+    gdb_test "p (int) 20."	"14"
+    gdb_test "p 0xf"		"f"
+    gdb_test "p 10"		"a"
+    gdb_test "p 100"		"64"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+
+test_input_radix_2
+test_input_radix_3
+test_input_radix_8
+test_input_radix_10
+test_input_radix_16
+test_output_radix_8
+test_output_radix_10
+test_output_radix_16
diff --git a/gdb/testsuite/gdb.base/recurse.c b/gdb/testsuite/gdb.base/recurse.c
new file mode 100644
index 0000000..1d6892d
--- /dev/null
+++ b/gdb/testsuite/gdb.base/recurse.c
@@ -0,0 +1,25 @@
+/* Trivial code used to test watchpoints in recursive code and 
+   auto-deletion of watchpoints as they go out of scope.  */
+
+static int 
+recurse (a)
+     int a;
+{
+  int b = 0;
+
+  if (a == 1)
+    return 1;
+
+  b = a;
+  b *= recurse (a - 1);
+  return b;
+}
+
+main()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  recurse (10);
+}
diff --git a/gdb/testsuite/gdb.base/recurse.exp b/gdb/testsuite/gdb.base/recurse.exp
new file mode 100644
index 0000000..88e1b30
--- /dev/null
+++ b/gdb/testsuite/gdb.base/recurse.exp
@@ -0,0 +1,145 @@
+# Copyright (C) 1992, 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cs.utah.edu)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "recurse"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+proc recurse_tests {} {
+
+    if [runto recurse] then {
+	# First we need to step over the assignment of b, so it has a known
+	# value.
+	gdb_test "next" "if \\(a == 1\\)" "next over b = 0 in first instance"
+	gdb_test "watch b" ".*\[Ww\]atchpoint \[0-9]*: b" \
+	    "set first instance watchpoint"
+
+	# Continue until initial set of b.
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*: b.*Old value = 0.*New value = 10.*" \
+	    "continue to first instance watchpoint, first time"] then {
+	    gdb_suppress_tests;
+	}
+
+	# Continue inward for a few iterations
+	gdb_test "continue" "Breakpoint.* recurse \\(a=9\\).*" \
+	    "continue to recurse (a = 9)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=8\\).*" \
+	    "continue to recurse (a = 8)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=7\\).*" \
+	    "continue to recurse (a = 7)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=6\\).*" \
+	    "continue to recurse (a = 6)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=5\\).*" \
+	    "continue to recurse (a = 5)"
+
+	# Put a watchpoint on another instance of b
+	# First we need to step over the assignment of b, so it has a known
+	# value.
+	gdb_test "next" "if \\(a == 1\\)" "next over b = 0 in second instance"
+	gdb_test "watch b" ".*\[Ww\]atchpoint \[0-9]*: b" \
+	    "set second instance watchpoint"
+
+	# Continue until initial set of b (second instance).
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*: b.*Old value = 0.*New value = 5.*"\
+	    "continue to second instance watchpoint, first time"] then {
+	gdb_suppress_tests;
+	}
+
+	# Continue inward for a few iterations
+	gdb_test "continue" "Breakpoint.* recurse \\(a=4\\).*" \
+	    "continue to recurse (a = 4)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=3\\).*" \
+	    "continue to recurse (a = 3)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=2\\).*" \
+	    "continue to recurse (a = 2)"
+	gdb_test "continue" "Breakpoint.* recurse \\(a=1\\).*" \
+	    "continue to recurse (a = 1)"
+
+	# Continue until second set of b (second instance).
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*: b.*Old value = 5.*New value = 120.*return.*" \
+	    "continue to second instance watchpoint, second time"] then { 
+	    gdb_suppress_tests;
+	}
+
+	# Continue again.  We should have a watchpoint go out of scope now
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*deleted.*recurse \\(a=6\\) .*" \
+	    "second instance watchpoint deleted when leaving scope"] then {
+	    gdb_suppress_tests;
+	}
+
+	# Continue until second set of b (first instance).
+	# 24320 is allowed as the final value for b as that's the value
+	# b would have on systems with 16bit integers.
+	#
+	# We could fix the test program to deal with this too.
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*b.*Old value = 10.*New value = \(3628800|24320\).*return.*" \
+	    "continue to first instance watchpoint, second time"] then {
+	    gdb_suppress_tests
+	}
+
+	# Continue again.  We should have a watchpoint go out of scope now
+	if [gdb_test "continue" \
+	    "Continuing.*\[Ww\]atchpoint.*deleted.*main \\(\\) .*" \
+	    "first instance watchpoint deleted when leaving scope"] then {
+	    gdb_suppress_tests;
+	}
+    }
+    gdb_stop_suppressing_tests;
+}
+
+# Only enabled for some targets merely because it has not been tested 
+# elsewhere.
+if {[istarget "sparc*-*-sunos4*"] || [istarget "hppa*-*-bsd*"] || [istarget "hppa*-*-hpux*"] || [istarget "sparclet-*-*"] || [istarget "m32r-*-elf"] || [istarget "mn10200-*-*"] || [istarget "mn10300-*-*"]} then {
+
+    # Preserve the old timeout, and set a new one that should be
+    # sufficient to avoid timing out during this test.
+    set oldtimeout $timeout
+    set timeout [expr "$timeout + 60"]
+    verbose "Timeout is now $timeout seconds" 2
+
+    recurse_tests
+
+    # Restore the preserved old timeout value.
+    set timeout $oldtimeout
+    verbose "Timeout is now $timeout seconds" 2
+}
diff --git a/gdb/testsuite/gdb.base/regs.exp b/gdb/testsuite/gdb.base/regs.exp
new file mode 100644
index 0000000..548b935
--- /dev/null
+++ b/gdb/testsuite/gdb.base/regs.exp
@@ -0,0 +1,86 @@
+# Tests of register displays for GDB.
+#   Copyright 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Stan Shebs. (shebs@cygnus.com)
+
+# This does not (yet) have an associated executable, since the IDT board
+# will display registers even without a program being loaded.
+# A more comprehensive register test would actually test reading
+# and writing of registers in a real program, although some care
+# would be required in the writing of the tests.
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+# These tests exercise IDT-specific MIPS registers for several
+# different processor models.
+
+# This should detect the actual processor in use and change
+# the expected results appropriately.  FIXME
+
+proc idt_register_tests { } {
+	# Test the generic IDT chip.
+	gdb_test "info registers" ".*"
+	gdb_test "info register zero" "zero(r0): 0x0;"
+	# FIXME access each generic register individually
+	# Test the 3041.
+	gdb_test "set processor r3041" ".*"
+	gdb_test "info registers" ".*"
+	gdb_test "info register bus"  "bus.*0x.*"
+	gdb_test "info register ccfg" "ccfg.*0x.*"
+	gdb_test "info register port" "port.*0x.*"
+	gdb_test "info register cmp"  "cmp.*0x.*"
+	gdb_test "info register elo"  "elo: invalid register"
+	gdb_test "info register ehi"  "ehi: invalid register"
+	gdb_test "info register cfg"  "cfg: invalid register"
+	gdb_test "info register ctxt" "ctxt: invalid register"
+	# Test the 3051.
+	gdb_test "set processor r3051" ".*"
+	gdb_test "info registers" ".*"
+	gdb_test "info register bus"  "bus: invalid register"
+	gdb_test "info register ccfg" "ccfg: invalid register"
+	gdb_test "info register port" "port: invalid register"
+	gdb_test "info register cmp"  "cmp: invalid register"
+	gdb_test "info register elo"  "elo.*0x.*"
+	gdb_test "info register ehi"  "ehi.*0x.*"
+	gdb_test "info register cfg"  "cfg: invalid register"
+	gdb_test "info register ctxt" "ctxt: invalid register"
+	# Test the 3071.
+	gdb_test "set processor r3071" ".*"
+	gdb_test "info registers" ".*"
+	gdb_test "info register bus"  "bus: invalid register"
+	gdb_test "info register ccfg" "ccfg: invalid register"
+	gdb_test "info register port" "port: invalid register"
+	gdb_test "info register cmp"  "cmp: invalid register"
+	gdb_test "info register elo"  "elo.*0x.*"
+	gdb_test "info register ehi"  "ehi.*0x.*"
+	gdb_test "info register cfg"  "cfg.*0x.*"
+	gdb_test "info register ctxt" "ctxt.*0x.*"
+}
+
+if [istarget "mips*-idt-*"] then {
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    idt_register_tests
+} else {
+    verbose "regs.exp tests ignored for this target"
+}
diff --git a/gdb/testsuite/gdb.base/relational.exp b/gdb/testsuite/gdb.base/relational.exp
new file mode 100644
index 0000000..6a0b38a
--- /dev/null
+++ b/gdb/testsuite/gdb.base/relational.exp
@@ -0,0 +1,481 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for correctenss of relational operators, associativity and precedence
+# with integer type variables
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#
+# test expressions with "int" types
+#
+
+gdb_test "set variable x=14" "" "set variable x=14"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable z=2" "" "set variable z=2"
+gdb_test "set variable w=3" "" "set variable w=3"
+
+send_gdb "print x\n"
+gdb_expect {
+    -re ".*14.*$gdb_prompt $" {
+        pass "print value of x"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x" }
+    timeout           { fail "(timeout) print value of x" }    
+  }
+
+
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of y" }
+    timeout           { fail "(timeout) print value of y" }    
+  }
+
+send_gdb "print z\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of z" }
+    timeout           { fail "(timeout) print value of z" }    
+  }
+
+send_gdb "print w\n"
+gdb_expect {
+    -re ".*3.*$gdb_prompt $" {
+        pass "print value of w"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of w" }
+    timeout           { fail "(timeout) print value of w" }    
+  }
+
+
+
+send_gdb "print x < y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y" }
+    timeout           { fail "(timeout) print value of x<y" }    
+  }
+
+send_gdb "print x <= y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y" }
+    timeout           { fail "(timeout) print value of x<=y" }    
+  }
+
+send_gdb "print x > y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x>y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y" }
+    timeout           { fail "(timeout) print value of x>y" }    
+  }
+
+send_gdb "print x >= y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x>=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=y" }
+    timeout           { fail "(timeout) print value of x>=y" }    
+  }
+
+send_gdb "print x == y\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x==y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x==y" }
+    timeout           { fail "(timeout) print value of x==y" }    
+  }
+
+send_gdb "print x != y\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x!=y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x!=y" }
+    timeout           { fail "(timeout) print value of x!=y" }    
+  }
+
+
+
+# Test associativity of <, >, <=, >=, ==, !=
+
+gdb_test "set variable x=3" "" "set variable x"
+gdb_test "set variable y=5" ""  "set variable y"
+gdb_test "set variable z=2" ""  "set variable z"
+
+
+
+send_gdb "print x < y < z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x<y<z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y<z" }
+    timeout           { fail "(timeout) print value of x<y<z" }    
+  }
+
+send_gdb "print x <= y <= z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x<=y<=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y<=z" }
+    timeout           { fail "(timeout) print value of x<=y<=z" }    
+  }
+
+send_gdb "print x > y > z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x>y>z"
+      }
+    -re 8".*$gdb_prompt $" { fail "print value of x>y>z" }
+    timeout           { fail "(timeout) print value of x>y>z" }    
+  }
+
+send_gdb "print x >= y >= z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x>=y>=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=y>=z" }
+    timeout           { fail "(timeout) print value of x>=y>=z" }    
+  }
+
+gdb_test "set variable x=2" "" "set variable x"
+gdb_test "set variable y=2" ""  "set variable y"
+gdb_test "set variable z=1" ""  "set variable z"
+
+
+send_gdb "print x == y == z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x==y==z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x==y==z" }
+    timeout           { fail "(timeout) print value of x==y==z" }    
+  }
+
+gdb_test "set variable z=0" ""  "set variable z"
+
+
+send_gdb "print x != y != z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x!=y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x!=y!=z" }
+    timeout           { fail "(timeout) print value of x!=y!=z" }    
+  }
+
+
+# test precedence rules on pairs of relational operators
+
+gdb_test "set variable x=0" "" "set variable x"
+gdb_test "set variable y=2" ""  "set variable y"
+gdb_test "set variable z=2" ""  "set variable z"
+
+
+send_gdb "print x < y == z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x<y==z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y==z" }
+    timeout           { fail "(timeout) print value of x<y==z" }    
+  }
+
+# 0  2  2
+send_gdb "print x < y != z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y!=z" }
+    timeout           { fail "(timeout) print value of x<y!=z" }    
+  }
+
+gdb_test "set variable x=2" "" "set variable x"
+gdb_test "set variable y=3" ""  "set variable y"
+gdb_test "set variable z=1" ""  "set variable z"
+
+
+# 2 3 1
+send_gdb "print x < y <= z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<y<=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y<=z" }
+    timeout           { fail "(timeout) print value of x<y<=z" }    
+  }
+
+
+# 2 3 1
+send_gdb "print x < y >= z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<y>=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y>=z" }
+    timeout           { fail "(timeout) print value of x<y>=z" }    
+  }
+
+
+gdb_test "set variable z=0" "" " set variable z"
+
+
+# 2 3 0
+send_gdb "print x < y > z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x<y>z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<y>z" }
+    timeout           { fail "(timeout) print value of x<y>z" }    
+  }
+
+
+gdb_test "set variable x=1" "" " set variable x"
+
+# 1 3 0
+send_gdb "print x > y >= z\n"
+gdb_expect {
+    -re ".*1.*$gdb_prompt $" {
+        pass "print value of x>y>=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y>=z" }
+    timeout           { fail "(timeout) print value of x>y>=z" }    
+  }
+
+
+gdb_test "set variable z=2" "" " set variable z"
+
+# 1 3 2
+send_gdb "print x > y == z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x>y==z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y==z" }
+    timeout           { fail "(timeout) print value of x>y==z" }    
+  }
+
+
+gdb_test "set variable x=2" "" " set variable x"
+gdb_test "set variable z=0" "" " set variable z"
+
+# 2 3 0
+send_gdb "print x > y != z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x>y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y!=z" }
+    timeout           { fail "(timeout) print value of x>y!=z" }    
+  }
+
+
+gdb_test "set variable x=4" "" "set x to 4"
+
+# 4 3 0
+send_gdb "print x > y <= z\n"
+gdb_expect {
+    -re ".*0.*$gdb_prompt $" {
+        pass "print value of x>y<=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>y<=z" }
+    timeout           { fail "(timeout) print value of x>y<=z" }    
+  }
+
+# 4 3 0
+send_gdb "print x >= y == z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x>=y==z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=y==z" }
+    timeout           { fail "(timeout) print value of x>=y==z" }    
+  }
+
+
+gdb_test "set variable x=2" "" " set variable x"
+
+# 2 3 0
+send_gdb "print x >= y != z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x>=y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=y!=z" }
+    timeout           { fail "(timeout) print value of x>=y!=z" }    
+  }
+
+
+gdb_test "set variable x=0" "" " set variable x"
+gdb_test "set variable z=4" "" " set variable z"
+
+# 0 3 4 
+send_gdb "print x >= y <= z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x>=y<=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=y<=z" }
+    timeout           { fail "(timeout) print value of x>=y<=z" }    
+  }
+
+# 0 3 4
+send_gdb "print x <= y == z\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x<=y==z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y==z" }
+    timeout           { fail "(timeout) print value of x<=y==z" }    
+  }
+
+gdb_test "set variable x=2" "" " set variable x"
+
+# 2 3 4
+send_gdb "print x <= y != z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x<=y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x<=y!=z" }
+    timeout           { fail "(timeout) print value of x<=y!=z" }    
+  }
+
+
+# 2 3 4
+send_gdb "print x == y != z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x==y!=z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x==y!=z" }
+    timeout           { fail "(timeout) print value of x==y!=z" }    
+  }
+
+        
+
+# test use of parenthesis to enforce different order of evaluation
+
+
+gdb_test "set variable z=0" "" " set variable z"
+
+# 2 3 0
+send_gdb "print x >= (y < z)\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x>=(y<z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=(y<z)" }
+    timeout           { fail "(timeout) print value of x>=(y<z)" }    
+  }
+
+
+# 2 3 0
+send_gdb "print x >= (y != z)\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of x>=(y!=z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x>=(y*!=z)" }
+    timeout           { fail "(timeout) print value of x>=(y!=z)" }    
+  }
+
+# 2 3 0
+send_gdb "print x == (y == z)\n"
+gdb_expect {
+    -re ".*0\r\n$gdb_prompt $" {
+        pass "print value of x==(y==z)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x==(y==z)" }
+    timeout           { fail "(timeout) print value of x==(y==z)" }    
+  }
+
+
+gdb_test "set variable x=1" "" " set variable x"
+gdb_test "set variable z=4" "" " set variable z"
+
+# 1 3 4
+send_gdb "print (x == y) < z\n"
+gdb_expect {
+    -re ".*1\r\n$gdb_prompt $" {
+        pass "print value of (x==y)<z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of (x==y)<z" }
+    timeout           { fail "(timeout) print value of (x==y)<z" }    
+  }
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.base/reread.exp b/gdb/testsuite/gdb.base/reread.exp
new file mode 100644
index 0000000..ccdabd5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/reread.exp
@@ -0,0 +1,117 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set prototypes 1
+
+# build the first test case
+
+set testfile1 "reread1"
+set srcfile1 ${testfile1}.c
+set binfile1 ${objdir}/${subdir}/${testfile1}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile1}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# build the second test case
+
+set testfile2 "reread2"
+set srcfile2 ${testfile2}.c
+set binfile2 ${objdir}/${subdir}/${testfile2}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb.
+
+set testfile "reread"
+set binfile ${objdir}/${subdir}/${testfile}
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set prms_id 13484
+set bug_id 0
+
+# Load the first executable.
+
+gdb_test "shell mv ${binfile1} ${binfile}" "" ""
+gdb_load ${binfile}
+
+# Set a breakpoint at foo
+
+gdb_test "break foo" \
+    "Breakpoint.*at.* file .*$srcfile1, line 14.*" \
+    "breakpoint foo in first file"
+
+
+# Run, should see "Breakpoint 1, foo () at hello1.c:14"
+
+gdb_run_cmd
+
+gdb_expect {
+    -re ".*Breakpoint.* foo .* at .*$srcfile1:14.*$gdb_prompt $"  {
+	pass "run to foo()";
+    }
+    -re ".*$gdb_prompt $" {
+	fail "run to foo()";
+	gdb_suppress_tests;
+    }
+    timeout { fail "run to foo() (timeout)" ; gdb_suppress_tests }
+}
+
+# Restore first executable to its original name, and move
+# second executable into its place.  Ensure that the new
+# executable is at least a second older than the old.
+
+gdb_test "shell mv ${binfile} ${binfile1}" "" ""
+gdb_test "shell mv ${binfile2} ${binfile}" "" ""
+gdb_test "shell sleep 1" "" ""
+gdb_test "shell touch ${binfile}" "" ""
+
+# Run a second time; GDB should detect that the executable has changed
+# and reset the breakpoints correctly.
+# Should see "Breakpoint 1, foo () at reread2.c:9"
+
+gdb_run_cmd
+gdb_expect {
+#    -re ".*re-reading symbols.*Breakpoint.* foo .* at .*$srcfile2:9.*$gdb_prompt $" {}
+    -re ".*Breakpoint.* foo .* at .*:9.*$gdb_prompt $" {
+	pass "run to foo() second time ";
+    }
+    -re ".*$gdb_prompt $" {
+	fail "run to foo() second time";
+	gdb_suppress_tests;
+    }
+    timeout { fail "run to foo() second time (timeout)" ; gdb_suppress_tests }
+}
+
+# End of tests.
+
+gdb_stop_suppressing_tests
+
+return 0
diff --git a/gdb/testsuite/gdb.base/reread1.c b/gdb/testsuite/gdb.base/reread1.c
new file mode 100644
index 0000000..ae98010
--- /dev/null
+++ b/gdb/testsuite/gdb.base/reread1.c
@@ -0,0 +1,26 @@
+/* pr 13484 */
+
+#include <stdio.h>
+
+int x;
+
+void bar()
+{
+  x--;
+}
+
+void foo()
+{
+  x++;
+}
+
+int main()
+{
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+  foo();
+  bar();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/reread2.c b/gdb/testsuite/gdb.base/reread2.c
new file mode 100644
index 0000000..fd9f7b7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/reread2.c
@@ -0,0 +1,21 @@
+/* pr 13484 */
+
+#include <stdio.h>
+
+int x;
+
+void foo()
+{
+  x++;
+  printf("This is foo\n");
+}
+
+int main()
+{
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+  foo();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/restore.c b/gdb/testsuite/gdb.base/restore.c
new file mode 100644
index 0000000..a65d648
--- /dev/null
+++ b/gdb/testsuite/gdb.base/restore.c
@@ -0,0 +1,260 @@
+/* Test GDB's ability to restore saved registers from stack frames
+   when using the `return' command.
+   Jim Blandy <jimb@cygnus.com> --- December 1998 */
+
+#include <stdio.h>
+
+/* This is the Emacs Lisp expression I used to generate the functions
+   in this file.  If people modify the functions manually, instead of
+   changing this expression and re-running it, then evaluating this
+   expression could wipe out their work, so you probably shouldn't
+   re-run it.  But I leave it here for reference. 
+
+   (defun callee (n) (format "callee%d" n))
+   (defun caller (n) (format "caller%d" n))
+   (defun local  (n) (format "l%d"  n))
+   (defun local-sum (n)
+     (let ((j 1))
+       (while (<= j n)
+         (insert (local j))
+	 (if (< j n) (insert "+"))
+         (setq j (1+ j)))))
+   (defun local-chain (n previous first-end)
+     (let ((j 1))
+       (while (<= j n)
+	 (insert "  register int " (local j)
+                 " = increment (" previous  ");")
+	 (if first-end 
+	   (progn
+             (insert "  /" "* " first-end " *" "/")
+             (setq first-end nil)))
+	 (insert "\n")
+	 (setq previous (local j))
+	 (setq j (1+ j))))
+     previous)
+
+   (save-excursion
+     (let ((limit 5))
+       (goto-char (point-max))
+       (search-backward "generated code starts here")
+       (forward-line 1)
+       (let ((start (point)))
+	 (search-forward "generated code ends here")
+	 (forward-line 0)
+	 (delete-region start (point)))
+
+       ;; Generate callee functions.
+       (let ((i 0))
+	 (while (<= i limit)
+           (insert (format "/%s Returns n * %d + %d %s/\n"
+                           "*" i (/ (+ i (* i i)) 2) "*"))
+	   (insert "int\n")
+	   (insert (callee i) " (int n)\n")
+	   (insert "{\n")
+	   (local-chain i "n" (callee i))
+	   (insert "  return ")
+	   (if (<= i 0) (insert "n")
+	     (local-sum i))
+	   (insert ";\n")
+	   (insert "}\n\n")
+	   (setq i (1+ i))))
+
+       ;; Generate caller functions.
+       (let ((i 1))
+	 (while (<= i limit)
+	   (insert "int\n")
+	   (insert (caller i) " (void)\n")
+	   (insert "{\n")
+	   (let ((last (local-chain i "0xfeeb" (caller i))))
+	     (insert "  register int n;\n")
+	     (let ((j 0))
+	       (while (<= j limit)
+	         (insert "  n = " (callee j) " (" 
+                         (if (> j 0) "n + " "")
+		         last ");\n")
+	         (setq j (1+ j)))))
+	   (insert "  return n+")
+	   (local-sum i)
+           (insert ";\n")
+	   (insert "}\n\n")
+	   (setq i (1+ i))))
+
+       ;; Generate driver function.
+       (insert "void\n")
+       (insert "driver (void)\n")
+       (insert "{\n")
+       (let ((i 1))
+	 (while (<= i limit)
+	   (insert "  printf (\"" (caller i) " () => %d\\n\", "
+		   (caller i) " ());\n")
+	   (setq i (1+ i))))
+       (insert "}\n\n")))
+
+	 */
+
+int
+increment (int n)
+{
+  return n + 1;
+}
+
+/* generated code starts here */
+/* Returns n * 0 + 0 */
+int
+callee0 (int n)
+{
+  return n;
+}
+
+/* Returns n * 1 + 1 */
+int
+callee1 (int n)
+{
+  register int l1 = increment (n);  /* callee1 */
+  return l1;
+}
+
+/* Returns n * 2 + 3 */
+int
+callee2 (int n)
+{
+  register int l1 = increment (n);  /* callee2 */
+  register int l2 = increment (l1);
+  return l1+l2;
+}
+
+/* Returns n * 3 + 6 */
+int
+callee3 (int n)
+{
+  register int l1 = increment (n);  /* callee3 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  return l1+l2+l3;
+}
+
+/* Returns n * 4 + 10 */
+int
+callee4 (int n)
+{
+  register int l1 = increment (n);  /* callee4 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  register int l4 = increment (l3);
+  return l1+l2+l3+l4;
+}
+
+/* Returns n * 5 + 15 */
+int
+callee5 (int n)
+{
+  register int l1 = increment (n);  /* callee5 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  register int l4 = increment (l3);
+  register int l5 = increment (l4);
+  return l1+l2+l3+l4+l5;
+}
+
+int
+caller1 (void)
+{
+  register int l1 = increment (0xfeeb);  /* caller1 */
+  register int n;
+  n = callee0 (l1);
+  n = callee1 (n + l1);
+  n = callee2 (n + l1);
+  n = callee3 (n + l1);
+  n = callee4 (n + l1);
+  n = callee5 (n + l1);
+  return n+l1;
+}
+
+int
+caller2 (void)
+{
+  register int l1 = increment (0xfeeb);  /* caller2 */
+  register int l2 = increment (l1);
+  register int n;
+  n = callee0 (l2);
+  n = callee1 (n + l2);
+  n = callee2 (n + l2);
+  n = callee3 (n + l2);
+  n = callee4 (n + l2);
+  n = callee5 (n + l2);
+  return n+l1+l2;
+}
+
+int
+caller3 (void)
+{
+  register int l1 = increment (0xfeeb);  /* caller3 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  register int n;
+  n = callee0 (l3);
+  n = callee1 (n + l3);
+  n = callee2 (n + l3);
+  n = callee3 (n + l3);
+  n = callee4 (n + l3);
+  n = callee5 (n + l3);
+  return n+l1+l2+l3;
+}
+
+int
+caller4 (void)
+{
+  register int l1 = increment (0xfeeb);  /* caller4 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  register int l4 = increment (l3);
+  register int n;
+  n = callee0 (l4);
+  n = callee1 (n + l4);
+  n = callee2 (n + l4);
+  n = callee3 (n + l4);
+  n = callee4 (n + l4);
+  n = callee5 (n + l4);
+  return n+l1+l2+l3+l4;
+}
+
+int
+caller5 (void)
+{
+  register int l1 = increment (0xfeeb);  /* caller5 */
+  register int l2 = increment (l1);
+  register int l3 = increment (l2);
+  register int l4 = increment (l3);
+  register int l5 = increment (l4);
+  register int n;
+  n = callee0 (l5);
+  n = callee1 (n + l5);
+  n = callee2 (n + l5);
+  n = callee3 (n + l5);
+  n = callee4 (n + l5);
+  n = callee5 (n + l5);
+  return n+l1+l2+l3+l4+l5;
+}
+
+void
+driver (void)
+{
+  printf ("caller1 () => %d\n", caller1 ());
+  printf ("caller2 () => %d\n", caller2 ());
+  printf ("caller3 () => %d\n", caller3 ());
+  printf ("caller4 () => %d\n", caller4 ());
+  printf ("caller5 () => %d\n", caller5 ());
+}
+
+/* generated code ends here */
+
+main ()
+{
+  register int local;
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  driver ();
+  printf("exiting\n");
+}
diff --git a/gdb/testsuite/gdb.base/restore.exp b/gdb/testsuite/gdb.base/restore.exp
new file mode 100644
index 0000000..64b714b
--- /dev/null
+++ b/gdb/testsuite/gdb.base/restore.exp
@@ -0,0 +1,111 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Test GDB's ability to restore saved registers from stack frames
+# when using the `return' command.
+#
+# This file was written by Jim Blandy <jimb@cygnus.com>, with
+# fragments borrowed from return.exp.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "restore"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc restore_tests { } {
+    global gdb_prompt
+
+    if { ! [ runto driver ] } then { return 0 }
+
+    set limit 5
+
+    # Set breakpoints at each of the `caller' functions.
+    for {set c 1} {$c <= $limit} {incr c} {
+      gdb_test "break caller$c" "Breakpoint.*\[0-9\]*\\." "break caller$c"
+    }
+
+    # Set breakpoints at each of the `callee' functions.
+    for {set c 1} {$c <= $limit} {incr c} {
+      gdb_test "break callee$c" "Breakpoint.*\[0-9\]*\\." "break caller$c"
+    }
+
+    # For each caller function,
+    #   call each of the callee functions,
+    #   force a return from the callee, and
+    #   make sure that the local variables still have the right values.
+    for {set c 1} {$c <= $limit} {incr c} {
+
+	# Continue to the next caller function.
+	gdb_test "continue" ".*/\\* caller$c \\*/" "run to caller$c"
+
+	# Do each callee function.
+        for {set e 1} {$e <= $limit} {incr e} {
+  	    gdb_test "  continue" ".*/\\* callee$e \\*/" "run to callee$e"
+
+            # Do a forced return from the callee.
+	    send_gdb "return 0\n"
+	    gdb_expect {
+		-re "Make .* return now.*y or n. $" {
+		    send_gdb "y\n"
+		    exp_continue
+		}
+		-re "$gdb_prompt $" { }
+            }
+
+            # Check that the values of the local variables are what
+	    # they should be.
+            for {set var 1} {$var <= $c} {incr var} {
+                set expected [expr 0xfeeb + $var]
+	        gdb_test "print l$var" " = $expected" \
+                         "caller$c called callee$e; variable l$var restored"
+            }
+        }
+    }
+
+    send_gdb "continue\n"
+
+    gdb_expect {
+        -re "exiting" {
+             pass "run to completion"
+        }
+        timeout { 
+             fail "(timeout) run to completion"
+        }
+    }
+}
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+set timeout 30
+restore_tests
diff --git a/gdb/testsuite/gdb.base/return.c b/gdb/testsuite/gdb.base/return.c
new file mode 100644
index 0000000..e19d1a0
--- /dev/null
+++ b/gdb/testsuite/gdb.base/return.c
@@ -0,0 +1,35 @@
+#include <stdio.h>
+/*  Test "return" command.  */
+
+func1 ()
+{
+  printf("in func1\n");
+}
+
+int
+func2 ()
+{
+  return -5;
+}
+
+double
+func3 ()
+{
+  return -5.0;
+}
+
+int tmp2;
+double tmp3;
+
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  func1 ();
+  printf("in main after func1\n");
+  tmp2 = func2 ();
+  tmp3 = func3 ();
+  printf("exiting\n");
+}
diff --git a/gdb/testsuite/gdb.base/return.exp b/gdb/testsuite/gdb.base/return.exp
new file mode 100644
index 0000000..c3a85e8
--- /dev/null
+++ b/gdb/testsuite/gdb.base/return.exp
@@ -0,0 +1,124 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cs.utah.edu)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "return"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc return_tests { } {
+    global gdb_prompt
+
+
+    if { ! [ runto func1 ] } then { return 0 }
+    send_gdb "return\n"
+    gdb_expect {
+	-re "Make .* return now.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re "func1 ..;.*$gdb_prompt $" {
+	    send_gdb "step\n"
+	    exp_continue
+	}
+    -re ".*in main after func1.*$gdb_prompt $" { pass "simple return" }
+    -re "$gdb_prompt $" { fail "simple return" }
+    timeout { fail "(timeout) simple return" }
+    }
+
+    # Set breakpoints in other interesting functions.
+    gdb_test "break func2" "" "break func2"
+    gdb_test "break func3" "" "break func3"
+
+    gdb_test "continue" "return -5;" "continue to return of -5"
+    send_gdb "return 5\n"
+    gdb_expect {
+	-re "Make .* return now.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+    -re ".*tmp2 = func2.*$gdb_prompt $" { }
+    -re "$gdb_prompt $" { fail "did not return (integer test)" }
+    timeout { fail "(timeout) did not return (integer test)" }
+    }
+    gdb_test "next" "tmp3 = func3.*" "next over call to func2"
+
+    gdb_test "p tmp2" ".* = 5" "correct value returned (integer test)"
+
+    gdb_test "continue" "return -5.0;" "continue to return of -5.0"
+    send_gdb "return 5.0\n"
+    gdb_expect {
+	-re "Make .* return now.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re ".*tmp3 = func3.*$gdb_prompt $" { }
+	-re "$gdb_prompt $" { fail "did not return (double test)" }
+	timeout { fail "(timeout) did not return (double test)" }
+    }
+
+    gdb_test "next" "printf.*" "next over call to func3"
+
+    # This test is going to fail on all i*86 systems using an i*87.
+    # When returning a floating point value from a function, all known
+    # compilers do this via a `fldl' instruction, which pushes the floating
+    # value on the i387 stack. This causes two problems:
+    # a) Most i*86 targets do not store (or cannot store, see comment in
+    #    in i386v-nat.c:i386_register_u_addr) the floating point registers
+    #    to the target.
+    # b) gdb would have to figure out if the `fldl' instruction (or variants
+    #    of it) has already been executed. If not, it would have to simulate
+    #    a push instruction, as it is not enough to write the register,
+    #    the floating point `stack pointer' has to be updated too.
+    #    Do not expect this to get fixed anytime soon.
+
+    # This test also fails for sparc Solaris 2.3 & 2.4, but passes under 2.5
+    # At the time the `next' is issued, the floating point unit for the
+    # process is not yet initialized, and the storing of the floating
+    # point value to the floating point return register is ignored.
+    # Xfail it for current versions that are known to fail.  Presumably
+    # if some future version does initialize the floating point unit at
+    # process start, making this test pass, it will be for a version that
+    # is not xfailed.
+
+    setup_xfail "i*86-*-*" "sparc-*-solaris2.3*" "sparc-*-solaris2.4*"
+    gdb_test "p tmp3" ".* = 5.*" "correct value returned double test (known problem with i*86 and sparc solaris"
+}
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+set timeout 30
+return_tests
diff --git a/gdb/testsuite/gdb.base/run.c b/gdb/testsuite/gdb.base/run.c
new file mode 100644
index 0000000..40ec720
--- /dev/null
+++ b/gdb/testsuite/gdb.base/run.c
@@ -0,0 +1,67 @@
+/*
+ *	This simple classical example of recursion is useful for
+ *	testing stack backtraces and such.
+ */
+
+#ifdef vxworks
+
+#  include <stdio.h>
+
+/* VxWorks does not supply atoi.  */
+static int
+atoi (z)
+     char *z;
+{
+  int i = 0;
+
+  while (*z >= '0' && *z <= '9')
+    i = i * 10 + (*z++ - '0');
+  return i;
+}
+
+/* I don't know of any way to pass an array to VxWorks.  This function
+   can be called directly from gdb.  */
+
+vxmain (arg)
+char *arg;
+{
+  char *argv[2];
+
+  argv[0] = "";
+  argv[1] = arg;
+  main (2, argv, (char **) 0);
+}
+
+#else /* ! vxworks */
+#  include <stdio.h>
+#endif /* ! vxworks */
+
+main (argc, argv, envp)
+int argc;
+char *argv[], **envp;
+{
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+#ifdef FAKEARGV
+    printf ("%d\n", factorial (1));
+#else    
+    if (argc != 2) {
+	printf ("usage:  factorial <number>\n");
+	return 1;
+    } else {
+	printf ("%d\n", factorial (atoi (argv[1])));
+    }
+#endif
+    return 0;
+}
+
+int factorial (value)
+int value;
+{
+    if (value > 1) {
+	value *= factorial (value - 1);
+    }
+    return (value);
+}
diff --git a/gdb/testsuite/gdb.base/scope.exp b/gdb/testsuite/gdb.base/scope.exp
new file mode 100644
index 0000000..6a92ca7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/scope.exp
@@ -0,0 +1,610 @@
+# Copyright (C) 1992, 1994, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "scope"
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/scope0.c" "${binfile}0.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/scope1.c" "${binfile}1.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# Test locating various things when stopped just inside main, after
+# running init0().  To prevent cascading of errors, we report the
+# first one and quit.  If all pass, then we print the pass results.
+
+proc test_at_main {} {
+    global gdb_prompt
+    global decimal
+    global det_file
+    global srcdir
+    global subdir
+    global gcc_compiled
+
+    # skip past init.  There may be a call to __main at the start of
+    # main, so the first next may only get us to the init0 call.
+    if [gdb_test "next" "$decimal.*foo \\(\\);" "next over init0() in main"  "$decimal.*init0 \\(\\);" "next"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal, which is 1
+
+    if [gdb_test "print filelocal" "\\\$$decimal = 1" "print filelocal" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if [gdb_test "print 'scope0.c'::filelocal" "\\\$$decimal = 1" "print 'scope0.c'::filelocal at main"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal_bss, which is 101
+
+    if [gdb_test "print filelocal_bss" "\\\$$decimal = 101" "print filelocal_bss" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if [gdb_test "print 'scope0.c'::filelocal_bss" "\\\$$decimal = 101" "print 'scope0.c'::filelocal_bss in test_at_main"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal_ro, which is 201
+
+    # No clue why the powerpc fails this test.
+    setup_xfail "powerpc-*-*"
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print filelocal_ro" "\\\$$decimal = 201" "print filelocal_ro in test_at_main" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    setup_xfail "powerpc-*-*"
+    if [gdb_test "print 'scope0.c'::filelocal_ro" "\\\$$decimal = 201" "print 'scope0.c'::filelocal_ro"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal, which is 2
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal" "\\\$$decimal = 2" "print 'scope1.c'::filelocal"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal_bss, which is 102
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal_bss" "\\\$$decimal = 102" "print 'scope1.c'::filelocal_bss"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal_ro, which is 202
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal_ro" "\\\$$decimal = 202" "print 'scope1.c'::filelocal_ro"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::foo::funclocal, which is 3
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if [gdb_test "print foo::funclocal" "\\\$$decimal = 3" "print foo::funclocal" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::foo::funclocal" "\\\$$decimal = 3" "print 'scope1.c'::foo::funclocal"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::foo::funclocal_ro, which is 203
+
+    if [gdb_test "print foo::funclocal_ro" "\\\$$decimal = 203" "print foo::funclocal_ro" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::foo::funclocal_ro" "\\\$$decimal = 203" "print 'scope1.c'::foo::funclocal_ro"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::bar::funclocal, which is 4
+
+    if [gdb_test "print bar::funclocal" "\\\$$decimal = 4" "print bar::funclocal" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::bar::funclocal" "\\\$$decimal = 4" "print 'scope1.c'::bar::funclocal"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::bar::funclocal"] { 
+      gdb_suppress_tests ; 
+    }
+    gdb_stop_suppressing_tests;
+
+}
+
+proc test_at_foo {} {
+    global gdb_prompt
+    global decimal
+    global det_file
+    global srcdir
+    global subdir
+    global gcc_compiled
+
+    if [gdb_test "next" ".*bar \\(\\);" "" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal, which is 1
+
+    if [gdb_test "print 'scope0.c'::filelocal" "\\\$$decimal = 1" "print 'scope0.c'::filelocal at foo"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal_bss, which is 101
+
+    if [gdb_test "print 'scope0.c'::filelocal_bss" "\\\$$decimal = 101" "print 'scope0.c'::filelocal_bss in test_at_foo"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal_ro, which is 201
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    setup_xfail "powerpc-*-*"
+    if [gdb_test "print 'scope0.c'::filelocal_ro" "\\\$$decimal = 201" "print 'scope0.c'::filelocal_ro"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    gdb_test "print filelocal" "\\\$$decimal = 2" "print filelocal at foo"
+
+    # Print scope1.c::filelocal, which is 2
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal" "\\\$$decimal = 2" "print 'scope1.c'::filelocal at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    gdb_test "print filelocal_bss" "\\\$$decimal = 102" \
+	"print filelocal_bss at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print 'scope1.c'::filelocal_bss" "\\\$$decimal = 102" "print 'scope1.c'::filelocal_bss at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_bss"
+
+
+    gdb_test "print filelocal_ro" "\\\$$decimal = 202" \
+	"print filelocal_ro at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    gdb_test "print 'scope1.c'::filelocal_ro" "\\\$$decimal = 202" "print 'scope1.c'::filelocal_ro at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_ro"
+
+
+    # Print scope1.c::foo::funclocal, which is 3
+
+    gdb_test "print funclocal" "\\\$$decimal = 3" "print funclocal at foo"
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print foo::funclocal" "\\\$$decimal = 3" \
+	"print foo::funclocal at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print 'scope1.c'::foo::funclocal" "\\\$$decimal = 3" "print 'scope1.c'::foo::funclocal at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal"
+
+
+    # Print scope1.c::foo::funclocal_bss, which is 103
+
+    gdb_test "print funclocal_bss" "\\\$$decimal = 103" \
+	"print funclocal_bss at foo"
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print foo::funclocal_bss" "\\\$$decimal = 103" \
+	"print foo::funclocal_bss at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print 'scope1.c'::foo::funclocal_bss" "\\\$$decimal = 103" "print 'scope1.c'::foo::funclocal_bss at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal_bss"
+
+
+    # Print scope1.c::foo::funclocal_ro, which is 203
+
+    gdb_test "print funclocal_ro" "\\\$$decimal = 203" \
+	"print funclocal_ro at foo"
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print foo::funclocal_ro" "\\\$$decimal = 203" \
+	"print foo::funclocal_ro at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print 'scope1.c'::foo::funclocal_ro" "\\\$$decimal = 203" "print 'scope1.c'::foo::funclocal_ro at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal_ro"
+
+
+    # Print scope1.c::bar::funclocal, which is 4
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print bar::funclocal" "\\\$$decimal = 4" \
+	"print bar::funclocal at foo"
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    gdb_test "print 'scope1.c'::bar::funclocal" "\\\$$decimal = 4" "print 'scope1.c'::bar::funclocal at foo"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::bar::funclocal"
+    gdb_stop_suppressing_tests;
+
+}
+
+proc test_at_bar {} {
+    global gdb_prompt
+    global decimal
+    global det_file
+    global srcdir
+    global subdir
+    global gcc_compiled
+
+    if [gdb_test "next" ".*" "" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope0.c::filelocal, which is 1
+
+    if [gdb_test "print 'scope0.c'::filelocal" "\\\$$decimal = 1" "print 'scope0.c'::filelocal at bar"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+   # Print scope0.c::filelocal_bss, which is 101
+
+    if [gdb_test "print 'scope0.c'::filelocal_bss" "\\\$$decimal = 101" "print 'scope0.c'::filelocal_bss in test_at_bar"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+   # Print scope0.c::filelocal_ro, which is 201
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    setup_xfail "powerpc-*-*"
+    if [gdb_test "print 'scope0.c'::filelocal_ro" "\\\$$decimal = 201" "print 'scope0.c'::filelocal_ro at bar"  "No symbol \"scope0.c\" in current context.*" "print '$srcdir/$subdir/scope0.c'::filelocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal, which is 2
+
+    if [gdb_test "print filelocal" "\\\$$decimal = 2" "print filelocal at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal" "\\\$$decimal = 2" "print 'scope1.c'::filelocal at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal_bss, which is 102
+
+    if [gdb_test "print filelocal_bss" "\\\$$decimal = 102" "print filelocal_bss at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal_bss" "\\\$$decimal = 102" "print 'scope1.c'::filelocal_bss at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::filelocal_ro, which is 202
+
+    if [gdb_test "print filelocal_ro" "\\\$$decimal = 202" "print filelocal_ro in test_at_bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::filelocal_ro" "\\\$$decimal = 202" "print 'scope1.c'::filelocal_ro at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::filelocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::foo::funclocal, which is 3
+
+    if {!$gcc_compiled} then { setup_xfail "hppa*-*-hpux*" }
+    if [gdb_test "print foo::funclocal" "\\\$$decimal = 3" "print foo::funclocal at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::foo::funclocal" "\\\$$decimal = 3" "print 'scope1.c'::foo::funclocal at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::foo::funclocal_bss, which is 103
+
+    if [gdb_test "print foo::funclocal_bss" "\\\$$decimal = 103" "print foo::funclocal_bss at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::foo::funclocal_bss" "\\\$$decimal = 103" "print 'scope1.c'::foo::funclocal_bss at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::foo::funclocal_ro, which is 203
+
+    if [gdb_test "print foo::funclocal_ro" "\\\$$decimal = 203" "print foo::funclocal_ro at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::foo::funclocal_ro" "\\\$$decimal = 203" "print 'scope1.c'::foo::funclocal_ro at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::foo::funclocal_ro"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::bar::funclocal, which is 4
+
+    if [gdb_test "print funclocal" "\\\$$decimal = 4" "print funclocal at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if [gdb_test "print bar::funclocal" "\\\$$decimal = 4" "print bar::funclocal at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::bar::funclocal" "\\\$$decimal = 4" "print 'scope1.c'::bar::funclocal at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::bar::funclocal"] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    # Print scope1.c::bar::funclocal_bss, which is 104
+
+    if [gdb_test "print funclocal_bss" "\\\$$decimal = 104" "print funclocal_bss at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if [gdb_test "print bar::funclocal_bss" "\\\$$decimal = 104" "print bar::funclocal_bss at bar" ] { 
+      gdb_suppress_tests ; 
+    }
+
+
+    if {$gcc_compiled} then { setup_xfail "rs6000-*-*" }
+    if [gdb_test "print 'scope1.c'::bar::funclocal_bss" "\\\$$decimal = 104" "print 'scope1.c'::bar::funclocal_bss at bar"  "No symbol \"scope1.c\" in current context.*" "print '$srcdir/$subdir/scope1.c'::bar::funclocal_bss"] { 
+      gdb_suppress_tests ; 
+    }
+    gdb_stop_suppressing_tests;
+
+}
+
+# This test has little to do with local scopes, but it is in scope.exp anyway.
+# That's life.
+
+proc test_at_autovars {} {
+    global gdb_prompt
+    global decimal
+    global hex
+    global srcfile
+
+    # Test symbol table lookup with 100 local (auto) variables.
+
+    gdb_breakpoint marker1
+
+    if [gdb_test "cont" "Break.* marker1 \\(\\) at .*:$decimal.*" "continue to marker1"] {
+	gdb_suppress_tests;
+    }
+
+    if [gdb_test "up" ".*" "" ] { 
+	gdb_suppress_tests ; 
+    }
+
+    set count 0
+    while {$count < 100} {
+	if [gdb_test "print i$count" ".* = $count" "" ] { 
+	  gdb_suppress_tests ; 
+	}
+
+	set count [expr $count+1]
+    }
+    clear_xfail "*-*-*"
+    pass "$count auto variables correctly initialized"
+
+    # Test that block variable sorting is not screwing us.
+    gdb_test "frame" "#.*autovars \\(bcd=5, abc=6\\).*" "args in correct order"
+}
+
+proc test_at_localscopes {} {
+    global gdb_prompt
+    global decimal
+    global hex
+    global srcfile
+
+    gdb_breakpoint marker2
+    gdb_breakpoint marker3
+    gdb_breakpoint marker4
+
+    if [gdb_test "cont" "Break.* marker2 \\(\\) at .*:$decimal.*" "continue to marker2"] {
+	gdb_suppress_tests;
+    }
+    if [gdb_test "up" ".*" "" ] { 
+	gdb_suppress_tests ; 
+    }
+
+    # Should be at first (outermost) scope.  Check values.
+
+    gdb_test "print localval" " = 10" "print localval, outer scope"
+    gdb_test "print localval1" " = 11" "print localval1, outer scope"
+    gdb_test "print localval2" "No symbol \"localval2\" in current context." \
+	"print localval2, outer scope"
+    gdb_test "print localval3" "No symbol \"localval3\" in current context." \
+	"print localval3, outer scope"
+
+    if [gdb_test "cont" "Break.* marker3 \\(\\) at .*:$decimal.*" \
+	"continue to marker3 in scope.exp"] then { gdb_suppress_tests }
+    if [gdb_test "up" "" "up from marker3 in scope.exp"] then { gdb_suppress_tests }
+
+    # Should be at next (first nested) scope.  Check values.
+
+    gdb_test "print localval" " = 20" \
+	"print localval, first nested scope"
+    gdb_test "print localval1" " = 11" "print localval1, first nested scope"
+    gdb_test "print localval2" " = 12" "print localval2, first nested scope"
+    gdb_test "print localval3" "No symbol \"localval3\" in current context." \
+	"print localval3, first nested scope"
+
+    # This test will only fail if the file was compiled by gcc, but
+    # there's no way to check that.
+    setup_xfail "a29k-*-udi" 2423
+    if [gdb_test "cont" "Break.* marker4.*at .*:$decimal.*" \
+	"continue to marker4 in scope.exp"] then { gdb_suppress_tests }
+    if [gdb_test "up" "" "up from marker4 in scope.exp"] then { gdb_suppress_tests }
+
+    gdb_test "print localval" " = 30" "print localval, innermost scope"
+    gdb_test "print localval1" " = 11" "print localval1, innermost scope"
+    gdb_test "print localval2" " = 12" "print localval2, innermost scope"
+    gdb_test "print localval3" " = 13" "print localval3, innermost scope"
+    gdb_stop_suppressing_tests;
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if [istarget "*-*-vxworks*"] {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+}
+
+# Test that variables in various segments print out correctly before
+# the program is run.  
+
+# AIX--sections get mapped to the same address so we can't get the right one.
+setup_xfail "rs6000-*-*"
+setup_xfail "powerpc-*-*"
+
+gdb_test "print 'scope0.c'::filelocal_ro" "= 201"
+
+# gdb currently cannot access bss memory on some targets if the inferior
+# is not running.
+#
+# For PA boards using monitor/remote-pa.c, the bss test is going to 
+# randomly fail.  We've already put remote-pa on the target stack,
+# so we actually read memory from the board.  Problem is crt0.o
+# is responsible for clearing bss and that hasnt' happened yet.
+#
+# This is a problem for all non-native targets. -- manson
+if ![isnative] {
+    unsupported "print 'scope0.c'::filelocal_bss before run"
+} else {
+    gdb_test "print 'scope0.c'::filelocal_bss" "= 0" \
+	"print 'scope0.c'::filelocal_bss before run"
+}
+
+gdb_test "print 'scope0.c'::filelocal" "= 1" \
+    "print 'scope0.c'::filelocal before run"
+
+if [runto_main] then { test_at_main }
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+if [runto foo] then { test_at_foo }
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+if [runto bar] then { test_at_bar }
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+if [runto localscopes] then { test_at_localscopes }
+if [istarget "mips-idt-*"] then {
+    # Restart because IDT/SIM runs out of file descriptors.
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load ${binfile}
+}
+if [runto autovars] then { test_at_autovars }
+
+if [istarget "*-*-vxworks*"] {
+    set timeout 120
+    verbose "Timeout is now $timeout seconds" 2
+}
diff --git a/gdb/testsuite/gdb.base/scope0.c b/gdb/testsuite/gdb.base/scope0.c
new file mode 100644
index 0000000..3a1b89e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/scope0.c
@@ -0,0 +1,176 @@
+static int filelocal = 1;	/* In Data section */
+static int filelocal_bss;	/* In BSS section */
+#ifndef __STDC__
+#define	const	/**/
+#endif
+static const int filelocal_ro = 201;	/* In Read-Only Data section */
+
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  init0 ();
+  foo ();
+  autovars (5, 6);
+  localscopes (0);
+}
+
+/* On some systems, such as AIX, unreferenced variables are deleted
+   from the executable.  */
+usestatics ()
+{
+  useit (filelocal);
+  useit (filelocal_bss);
+  useit (filelocal_ro);
+}
+
+init0 ()
+{
+  filelocal_bss = 101;
+  init1 ();
+}
+
+/* This is to derail optimizer in localscopes.
+   Return 1 + 2 + . . . + N.  */
+int
+sum_upto (n)
+     int n;
+{
+  int i;
+  int retval = 0;
+
+  for (i = 1; i <= n; ++i)
+    retval += i;
+  return retval;
+}
+
+int
+useit (val)
+{
+    static int usedval;
+
+    usedval = val;
+    return val + sum_upto (0);
+}
+
+int
+autovars (bcd, abc)
+     int bcd;
+     int abc;
+{
+    int  i0 =  useit (0),  i1 =  useit (1),  i2 =  useit (2);
+    int  i3 =  useit (3),  i4 =  useit (4),  i5 =  useit (5);
+    int  i6 =  useit (6),  i7 =  useit (7),  i8 =  useit (8);
+    int  i9 =  useit (9), i10 = useit (10), i11 = useit (11);
+    int i12 = useit (12), i13 = useit (13), i14 = useit (14);
+    int i15 = useit (15), i16 = useit (16), i17 = useit (17);
+    int i18 = useit (18), i19 = useit (19), i20 = useit (20);
+    int i21 = useit (21), i22 = useit (22), i23 = useit (23);
+    int i24 = useit (24), i25 = useit (25), i26 = useit (26);
+    int i27 = useit (27), i28 = useit (28), i29 = useit (29);
+    int i30 = useit (30), i31 = useit (31), i32 = useit (32);
+    int i33 = useit (33), i34 = useit (34), i35 = useit (35);
+    int i36 = useit (36), i37 = useit (37), i38 = useit (38);
+    int i39 = useit (39), i40 = useit (40), i41 = useit (41);
+    int i42 = useit (42), i43 = useit (43), i44 = useit (44);
+    int i45 = useit (45), i46 = useit (46), i47 = useit (47);
+    int i48 = useit (48), i49 = useit (49), i50 = useit (50);
+    int i51 = useit (51), i52 = useit (52), i53 = useit (53);
+    int i54 = useit (54), i55 = useit (55), i56 = useit (56);
+    int i57 = useit (57), i58 = useit (58), i59 = useit (59);
+    int i60 = useit (60), i61 = useit (61), i62 = useit (62);
+    int i63 = useit (63), i64 = useit (64), i65 = useit (65);
+    int i66 = useit (66), i67 = useit (67), i68 = useit (68);
+    int i69 = useit (69), i70 = useit (70), i71 = useit (71);
+    int i72 = useit (72), i73 = useit (73), i74 = useit (74);
+    int i75 = useit (75), i76 = useit (76), i77 = useit (77);
+    int i78 = useit (78), i79 = useit (79), i80 = useit (80);
+    int i81 = useit (81), i82 = useit (82), i83 = useit (83);
+    int i84 = useit (84), i85 = useit (85), i86 = useit (86);
+    int i87 = useit (87), i88 = useit (88), i89 = useit (89);
+    int i90 = useit (90), i91 = useit (91), i92 = useit (92);
+    int i93 = useit (93), i94 = useit (94), i95 = useit (95);
+    int i96 = useit (96), i97 = useit (97), i98 = useit (98);
+    int i99 = useit (99);
+
+    /* Use all 100 of the local variables to derail agressive optimizers.  */
+
+    useit ( i0); useit ( i1); useit ( i2); useit ( i3); useit ( i4);
+    useit ( i5); useit ( i6); useit ( i7); useit ( i8); useit ( i9);
+    useit (i10); useit (i11); useit (i12); useit (i13); useit (i14);
+    useit (i15); useit (i16); useit (i17); useit (i18); useit (i19);
+    useit (i20); useit (i21); useit (i22); useit (i23); useit (i24);
+    useit (i25); useit (i26); useit (i27); useit (i28); useit (i29);
+    useit (i30); useit (i31); useit (i32); useit (i33); useit (i34);
+    useit (i35); useit (i36); useit (i37); useit (i38); useit (i39);
+    useit (i40); useit (i41); useit (i42); useit (i43); useit (i44);
+    useit (i45); useit (i46); useit (i47); useit (i48); useit (i49);
+    useit (i50); useit (i51); useit (i52); useit (i53); useit (i54);
+    useit (i55); useit (i56); useit (i57); useit (i58); useit (i59);
+    useit (i60); useit (i61); useit (i62); useit (i63); useit (i64);
+    useit (i65); useit (i66); useit (i67); useit (i68); useit (i69);
+    useit (i70); useit (i71); useit (i72); useit (i73); useit (i74);
+    useit (i75); useit (i76); useit (i77); useit (i78); useit (i79);
+    useit (i80); useit (i81); useit (i82); useit (i83); useit (i84);
+    useit (i85); useit (i86); useit (i87); useit (i88); useit (i89);
+    useit (i90); useit (i91); useit (i92); useit (i93); useit (i94);
+    useit (i95); useit (i96); useit (i97); useit (i98); useit (i99);
+
+    useit (abc); useit (bcd);
+
+    marker1 ();
+    return i0 + i1 + i2 + i3 + i4 + i5 + i6 + i7 + i8 + i9 + i10
+      + i11 + i12 + i13 + i14 + i15 + i16 + i17 + i18 + i19 + i20
+      + i21 + i22 + i23 + i24 + i25 + i26 + i27 + i28 + i29 + i30
+      + i31 + i32 + i33 + i34 + i35 + i36 + i37 + i38 + i39 + i40
+      + i41 + i42 + i43 + i44 + i45 + i46 + i47 + i48 + i49 + i50
+      + i51 + i52 + i53 + i54 + i55 + i56 + i57 + i58 + i59 + i60
+      + i61 + i62 + i63 + i64 + i65 + i66 + i67 + i68 + i69 + i70
+      + i71 + i72 + i73 + i74 + i75 + i76 + i77 + i78 + i79 + i80
+      + i81 + i82 + i83 + i84 + i85 + i86 + i87 + i88 + i89 + i90
+      + i91 + i92 + i93 + i94 + i95 + i96 + i97 + i98 + i99 + abc + bcd;
+}
+
+int
+localscopes (x)
+     int x;
+{
+    int localval;
+    int retval;
+    int i;
+
+    localval = 0;
+    useit (localval);
+
+    {
+	int localval = x + 4 + sum_upto (3); /* 10 */
+	int localval1 = x + 5 + sum_upto (3); /* 11 */
+
+	useit (localval);
+	useit (localval1);
+	marker2 ();
+	{
+	    int localval = localval1 + 3 + sum_upto (3); /* 20 */
+	    int localval2 = localval1 + sum_upto (1); /* 12 */
+	    useit (localval);
+	    useit (localval2);
+	    marker3 ();
+	    {
+		int localval = localval2 + 3 + sum_upto (5); /* 30 */
+		int localval3 = localval2 + sum_upto (1); /* 13 */
+		useit (localval);
+		useit (localval3);
+		marker4 ();
+		retval = x + localval1 + localval2 + localval3;
+	    }
+	}
+    }
+    return retval;
+}
+
+marker1 () {}
+marker2 () {}
+marker3 () {}
+marker4 () {}
diff --git a/gdb/testsuite/gdb.base/scope1.c b/gdb/testsuite/gdb.base/scope1.c
new file mode 100644
index 0000000..cccad6f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/scope1.c
@@ -0,0 +1,45 @@
+static int filelocal = 2;	/* In Data section */
+static int filelocal_bss;	/* In BSS section */
+#ifndef __STDC__
+#define	const	/**/
+#endif
+static const int filelocal_ro = 202;	/* In Read-Only Data section */
+
+foo ()
+{
+  static int funclocal = 3;	/* In Data section */
+  static int funclocal_bss;	/* In BSS section */
+  static const int funclocal_ro = 203;	/* RO Data */
+  static const int funclocal_ro_bss;	/* RO Data */
+
+  funclocal_bss = 103;
+  bar ();
+}
+
+bar ()
+{
+  static int funclocal = 4;	/* In data section */
+  static int funclocal_bss;	/* In BSS section */
+  funclocal_bss = 104;
+}
+
+init1 ()
+{
+  filelocal_bss = 102;
+}
+
+/* On some systems, such as AIX, unreferenced variables are deleted
+   from the executable.  */
+usestatics1 ()
+{
+  useit1 (filelocal);
+  useit1 (filelocal_bss);
+  useit1 (filelocal_ro);
+}
+
+useit1 (val)
+{
+    static int usedval;
+
+    usedval = val;
+}
diff --git a/gdb/testsuite/gdb.base/sect-cmd.exp b/gdb/testsuite/gdb.base/sect-cmd.exp
new file mode 100644
index 0000000..27bde04
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sect-cmd.exp
@@ -0,0 +1,109 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+# This test exists solely to exercise the "section" command for
+# code-coverage on HP-UX.  (So far as I can tell, the "section"
+# command isn't needed on HP-UX, but probably is for embedded
+# apps.)
+#
+if ![istarget "hppa*-*-hpux*"] then {
+  return
+}
+
+set testfile "break"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then { fail "section command tests suppressed" }
+
+# Get the $CODE$ section's starting address.
+#
+# (Note that this works for PA32 programs, which use the SOM file
+# format.  PA64 uses ELF, and when support for that is added, it's
+# not clear that there'll be a section named "$CODE$" in such
+# programs.)
+#
+send_gdb "info files\n"
+gdb_expect {
+  -re ".*(0x\[0-9a-fA-F\]*) - (0x\[0-9a-fA-F\]*) is .CODE..*$gdb_prompt $"\
+          {pass "info files"}
+  -re "$gdb_prompt $"\
+          {fail "info files"}
+  timeout {fail "(timeout) info files"}
+}
+
+# Reset the section to that same starting address, which should be
+# harmless (i.e., we just want to exercise the section command).
+#
+send_gdb "section \$CODE\$ $expect_out(1,string)\n"
+gdb_expect {
+  -re ".*$expect_out(1,string) \- $expect_out(2,string) is .CODE..*$gdb_prompt $"\
+          {pass "set section command"}
+  -re "$gdb_prompt $"\
+          {fail "set section command"}
+  timeout {fail "(timeout) set section command"}
+}
+
+# Verify that GDB responds gracefully to a non-existent section name.
+#
+send_gdb "section FOOBARBAZ 0x1234\n"
+gdb_expect {
+  -re "Section FOOBARBAZ not found\r\n$gdb_prompt $"\
+          {pass "non-existent section disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "non-existent section disallowed"}
+  timeout {fail "(timeout) non-existent section disallowed"}
+}
+
+# We "happen to know" that GDB uses a fixed size character buffer to
+# parse the section name into, and the buffer is declared to be 100
+# characters in length.  Verify that GDB gracefully handles section
+# names longer than that.  (The section is also non-existent.)
+#
+send_gdb "section A234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123 0x1234\n"
+gdb_expect {
+  -re "Section A23456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789 not found\r\n$gdb_prompt $"\
+          {pass "non-existent too-long section disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "non-existent too-long section disallowed"}
+  timeout {fail "(timeout) non-existent too-long section disallowed"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/setshow.c b/gdb/testsuite/gdb.base/setshow.c
new file mode 100644
index 0000000..ed4e7a9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/setshow.c
@@ -0,0 +1,22 @@
+/* IMPORTANT: leave this comment in the first line of this source file. */
+/*            this will guarantee that line 1 contains no code. */
+
+#include <stdio.h>
+
+int 
+main(argc, argv)
+     int argc;
+     char **argv;
+{
+  int i = 1;
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+
+  if (argc <= 0 || argc > 8)
+    return -1;
+  while (i < argc)
+    printf ("%s ", argv[i++]);
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/setshow.exp b/gdb/testsuite/gdb.base/setshow.exp
new file mode 100644
index 0000000..37c2f84
--- /dev/null
+++ b/gdb/testsuite/gdb.base/setshow.exp
@@ -0,0 +1,243 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "setshow"
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if { [gdb_compile ${srcfile} ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# make sure $pc is sane, in case we're talking to a board.
+if { ![runto_main] } {
+    gdb_suppress_tests;
+}
+
+#
+# Test gdb set and show commands.
+# Add tests here for show and set that don't fit neatly elsewhere.
+# FIXME: many rudimentary tests for set and show commands have been
+#        added below, but most do nothing more than check that a 
+#        variable has been set successfully, ie. they do not test
+#        whether setting the variable has had the desired effect.
+#
+
+#test default annotation_level is 0
+gdb_test "show annotate" "Annotation_level is 0..*"  "default annotation_level is zero"
+
+#test set annotate 2
+send_gdb "set annotate 2\n"
+gdb_expect {
+	-re ".*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
+				{ pass "set annotate 2" }
+ 	-re ".*$gdb_prompt $"	{ fail "set annotate 2" }
+	timeout			{ fail "(timeout) set annotate 2" }
+    }
+
+send_gdb "show annotate\n"
+gdb_expect {
+	-re ".*\032\032post-prompt.*Annotation_level is 2..*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
+				{ pass "show annotate (2)" }
+ 	-re ".*$gdb_prompt $"	{ fail "show annotate (2)" }
+	timeout			{ fail "(timeout) show annotate (2)" }
+    }
+
+#test annotation_level 2
+send_gdb "info line 1\n"
+gdb_expect {
+	-re ".*\032\032post-prompt.*Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*\032\032pre-prompt.*$gdb_prompt .*\032\032prompt.*$" \
+				{ pass "annotation_level 2" }
+	-re ".*$gdb_prompt $"	{ fail "annotation_level 2" }
+	timeout			{ fail "(timeout) annotation_level 2" }
+    }
+
+#test set annotate 1
+gdb_test "set annotate 1" ".*post-prompt.*"  "set annotate 1" 
+gdb_test "show annotate" "Annotation_level is 1..*"  "show annotate (1)" 
+#test annotation_level 1
+gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*:1:0:beg:0x.*"  "annotation_level 1" 
+#test set annotate 0
+gdb_test "set annotate 0" "" "set annotate 0" 
+gdb_test "show annotate" "Annotation_level is 0..*"  "show annotate (0)" 
+#test annotation_level 0
+gdb_test "info line 1" "Line 1 of .* is at address .* but contains no code.*"  "annotation_level 0" 
+#test set args
+gdb_test "set args foo bar blup baz bubble" "" "set args" 
+#test show args
+gdb_test "show args" "Argument list to give program being debugged when it is started is \"foo bar blup baz bubble\"..*" "show args"
+
+# Don't test if we can't pass args or if we're using a stub.
+if { ![target_info exists use_gdb_stub] && ![target_info exists noargs] } {
+    #test passing args
+    gdb_test "cont" "Continuing.*" "continuing"
+    delete_breakpoints
+    gdb_test "run" "Starting program:.*foo bar blup baz bubble.*" "passing args"
+}
+#test set check range on
+gdb_test "set check range on" "" "set check range on" 
+#test show check range on
+gdb_test "show check range" "Range checking is \"on\"\..*" "show check range (on)" 
+#test set check range auto
+gdb_test "set check range auto" "" "set check range auto" 
+#test show check range auto
+gdb_test "show check range" "Range checking is \"auto; currently .*" "show check range (auto)" 
+#test set check type on
+gdb_test "set check type on" "" "set check type on" 
+#test show check type on
+gdb_test "show check type" "Type checking is \"on\"..*" "show check type (on)" 
+#test set check type auto
+gdb_test "set check type auto" "" "set check type auto" 
+#test show check type
+gdb_test "show check type" "Type checking is \"auto; currently .*" "show check type (auto)" 
+#test set complaints 100
+gdb_test "set complaints 100" "" "set complaints 100" 
+#test show complaints 100
+gdb_test "show complaints" "Max number of complaints about incorrect symbols is 100..*" "show complaints (100)" 
+#test set complaints 0
+gdb_test "set complaints 0" "" "set complaints 0" 
+#test show complaints 0
+gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0..*" "show complaints (0)" 
+#test set confirm off
+gdb_test "set confirm off" "" "set confirm off" 
+#test show confirm off
+gdb_test "show confirm" "Whether to confirm potentially dangerous operations is off..*" "show confirm (off)" 
+#test set confirm on
+gdb_test "set confirm on" "" "set confirm on" 
+#test show confirm on
+gdb_test "show confirm" "Whether to confirm potentially dangerous operations is on..*" "show confirm (on)" 
+#test set editing off
+gdb_test "set editing off" "" "set editing off" 
+#test show editing off
+gdb_test "show editing" "Editing of command lines as they are typed is off..*" "show editing (off)" 
+#test set editing on
+#gdb_test "set editing on" "" "set editing on" 
+#test show editing on
+#gdb_test "show editing" "Editing of command lines as they are typed is on..*" "show editing (on)" 
+#test set environment FOOBARBAZ
+gdb_test "set environment FOOBARBAZ = grbxgrbxgrbx" ""    "set environment FOOBARBAZ" 
+#test show environment FOOBARBAZ
+gdb_test "show environment FOOBARBAZ" "FOOBARBAZ = grbxgrbxgrbx.*"  "show environment FOOBARBAZ" 
+#test set height 100
+gdb_test "set height 100" "" "set height 100" 
+#test show height 100
+gdb_test "show height" "Number of lines gdb thinks are in a page is 100..*" "show height" 
+#test set history expansion on
+gdb_test "set history expansion on" "" "set history expansion on" 
+#test show history expansion on
+gdb_test "show history expansion on" "History expansion on command input is on.*" "show history expansion" 
+#test set history filename foobar.baz
+gdb_test "set history filename foobar.baz" ""    "set history filename foobar.baz" 
+#test show history filename foobar.baz
+gdb_test "show history filename" "The filename in which to record the command history is \"foobar.baz\"..*"  "show history filename (foobar.baz)" 
+#test set history save on
+gdb_test "set history save on" "" "set history save on" 
+#test show history save on
+gdb_test "show history save" "Saving of the history record on exit is on..*"  "show history save (on)" 
+#test set history size 100
+gdb_test "set history size 100" "" "set history size 100" 
+#test show history size 100
+gdb_test "show history size" "The size of the command history is 100..*" "show history size (100)" 
+#test set language asm
+gdb_test "set language asm" "" "set language asm" 
+#test show language asm
+gdb_test "show language" "The current source language is \"asm\"..*" "show language (asm)" 
+#test set language auto
+gdb_test "set language auto" "" "set language auto" 
+#test show language
+gdb_test "show language" "The current source language is \"auto.*\"..*" "show language (auto)" 
+#test set listsize 100
+gdb_test "set listsize 100" "" "set listsize 100" 
+#test show listsize 100
+gdb_test "show listsize" "Number of source lines gdb will list by default is 100..*" "show listsize (100)" 
+
+if ![board_info target exists gdb_prompt] {
+    #test set prompt (FooBarBaz) 
+    set newprompt "\\(FooBarBaz\\)"
+    send_gdb "set prompt (FooBarBaz) \n"
+    gdb_expect {
+	-re "$newprompt $"	{ pass "set prompt (FooBarBaz) " }
+	timeout			{ fail "(timeout) set prompt (FooBarBaz) " }
+    }
+
+    #test show prompt (FooBarBaz) 
+    send_gdb "show prompt\n"
+    gdb_expect {
+	-re "Gdb's prompt is \"$newprompt \"..* $" \
+		{ pass "show prompt (FooBarBaz) " }
+	timeout			{ fail "(timeout) show prompt (FooBarBaz) " }
+    }
+
+    #test set prompt (gdb) 
+    send_gdb "set prompt (gdb) \n"
+    gdb_expect {
+	-re "$gdb_prompt $"		{ pass "set prompt (gdb) " }
+	timeout			{ fail "(timeout) set prompt (gdb) " }
+    }
+}
+
+#test set radix 11
+gdb_test "set radix 11" "Unsupported output radix ``decimal 11''; output radix unchanged..*"  "set radix 11" 
+#test set radix 16
+gdb_test "set radix 16" "Input and output radices now set to decimal 16, hex 10, octal 20..*"  "set radix 16" 
+#test show radix 16
+gdb_test "show radix" "Input and output radices set to decimal 16, hex 10, octal 20..*"  "show radix (16)" 
+#test set radix 10
+gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12..*"  "set radix 10" 
+#test show radix 10
+gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12..*" "show radix (10)" 
+#test set width 90
+gdb_test "set width 90" "" "set width 90"
+#test show width 90
+gdb_test "show width" "Number of characters gdb thinks are in a line is 90..*" "show width (90)" 
+#test set write on
+# This is only supported on targets which use exec.o.
+gdb_test "set write on" ""  "set write on" 
+#test show write on
+# This is only supported on targets which use exec.o.
+gdb_test "show write" "Writing into executable and core files is on..*" "show write (on)" 
+#test set symbol-reloading on
+gdb_test "set symbol-reloading on" "" "set symbol-reloading on" 
+#test show symbol-reloading on
+gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on..*" "show symbol-reloading (on)" 
+#test show user
+gdb_test "show user" "" "show user" 
+#test set verbose on
+gdb_test "set verbose on" "" "set verbose on" 
+#test show verbose on
+gdb_test "show verbose" "Verbose printing of informational messages is on..*" "show verbose (on)" 
+#test set verbose off
+gdb_test "set verbose off" "" "set verbose off" 
+#test show verbose off
+gdb_test "show verbose" "Verbosity is off..*" "show verbose (off)" 
diff --git a/gdb/testsuite/gdb.base/setvar.c b/gdb/testsuite/gdb.base/setvar.c
new file mode 100644
index 0000000..7162155
--- /dev/null
+++ b/gdb/testsuite/gdb.base/setvar.c
@@ -0,0 +1,271 @@
+main (argc, argv, envp)
+     int argc;
+     char **argv;
+     char **envp;
+{
+    extern void dummy();
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    dummy();
+}
+
+/* We put main() right up front so its line number doesn't keep changing.  */
+
+/*
+ *	Test file with lots of different types, for testing the
+ *	"whatis" command.
+ */
+
+/*
+ *	First the basic C types.
+ */
+
+#if !defined (__STDC__) && !defined (_AIX)
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+/*
+ *	Now some derived types, which are arrays, functions-returning,
+ *	pointers, structures, unions, and enumerations.
+ */
+
+/**** arrays *******/
+
+char		v_char_array[2];
+signed char	v_signed_char_array[2];
+unsigned char	v_unsigned_char_array[2];
+
+short		v_short_array[2];
+signed short	v_signed_short_array[2];
+unsigned short	v_unsigned_short_array[2];
+
+int		v_int_array[2];
+signed int	v_signed_int_array[2];
+unsigned int	v_unsigned_int_array[2];
+
+long		v_long_array[2];
+signed long	v_signed_long_array[2];
+unsigned long	v_unsigned_long_array[2];
+
+float		v_float_array[2];
+double		v_double_array[2];
+
+/**** pointers *******/
+
+char		*v_char_pointer;
+signed char	*v_signed_char_pointer;
+unsigned char	*v_unsigned_char_pointer;
+
+short		*v_short_pointer;
+signed short	*v_signed_short_pointer;
+unsigned short	*v_unsigned_short_pointer;
+
+int		*v_int_pointer;
+signed int	*v_signed_int_pointer;
+unsigned int	*v_unsigned_int_pointer;
+
+long		*v_long_pointer;
+signed long	*v_signed_long_pointer;
+unsigned long	*v_unsigned_long_pointer;
+
+float		*v_float_pointer;
+double		*v_double_pointer;
+
+/**** structs *******/
+
+struct t_struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct1;
+
+struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct2;
+
+/**** unions *******/
+
+union t_union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union;
+
+union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union2;
+
+/*** Functions returning type ********/
+
+char		v_char_func () { return(0); }
+signed char	v_signed_char_func () { return (0); }
+unsigned char	v_unsigned_char_func () { return (0); }
+
+short		v_short_func () { return (0); }
+signed short	v_signed_short_func () { return (0); }
+unsigned short	v_unsigned_short_func () { return (0); }
+
+int		v_int_func () { return (0); }
+signed int	v_signed_int_func () { return (0); }
+unsigned int	v_unsigned_int_func () { return (0); }
+
+long		v_long_func () { return (0); }
+signed long	v_signed_long_func () { return (0); }
+unsigned long	v_unsigned_long_func () { return (0); }
+
+float		v_float_func () { return (0.0); }
+double		v_double_func () { return (0.0); }
+
+/**** Some misc more complicated things *******/
+
+struct link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} *s_link;
+
+union tu_link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} u_link;
+
+/**** Enumerations *******/
+
+enum colors {red, green, blue} color;
+enum cars {chevy, ford, porsche} clunker;
+
+/**** Enumeration bitfields, supported by GNU C *******/
+
+#ifdef __GNUC__
+enum senum {sm1 = -1, s1 = 1};
+struct senum_field {enum senum field:2; } sef;
+enum uenum {u1 = 1, u2 = 2};
+struct uenum_field {enum uenum field:2; } uef;
+#endif
+
+void
+dummy ()
+{
+  /* setvar.exp wants to allocate memory for constants.  So make sure malloc
+     gets linked into the program.  */
+  malloc (1);
+
+  /* Some linkers (e.g. on AIX) remove unreferenced variables,
+     so make sure to reference them. */
+  v_char = 0;
+  v_signed_char = 1;
+  v_unsigned_char = 2;
+
+  v_short = 3;
+  v_signed_short = 4;
+  v_unsigned_short = 5;    
+
+  v_int = 6;
+  v_signed_int = 7;
+  v_unsigned_int = 8;    
+
+  v_long = 9;
+  v_signed_long = 10;
+  v_unsigned_long = 11;    
+  
+  v_float = 100.0;
+  v_double = 200.0;
+
+
+  v_char_array[0] = v_char;
+  v_signed_char_array[0] = v_signed_char;
+  v_unsigned_char_array[0] = v_unsigned_char;
+
+  v_short_array[0] = v_short;
+  v_signed_short_array[0] = v_signed_short;
+  v_unsigned_short_array[0] = v_unsigned_short;
+
+  v_int_array[0] = v_int;
+  v_signed_int_array[0] = v_signed_int;
+  v_unsigned_int_array[0] = v_unsigned_int;
+
+  v_long_array[0] = v_long;
+  v_signed_long_array[0] = v_signed_long;
+  v_unsigned_long_array[0] = v_unsigned_long;
+
+  v_float_array[0] = v_float;
+  v_double_array[0] = v_double;
+
+  v_char_pointer = &v_char;
+  v_signed_char_pointer = &v_signed_char;
+  v_unsigned_char_pointer = &v_unsigned_char;
+
+  v_short_pointer = &v_short;
+  v_signed_short_pointer = &v_signed_short;
+  v_unsigned_short_pointer = &v_unsigned_short;
+
+  v_int_pointer = &v_int;
+  v_signed_int_pointer = &v_signed_int;
+  v_unsigned_int_pointer = &v_unsigned_int;
+
+  v_long_pointer = &v_long;
+  v_signed_long_pointer = &v_signed_long;
+  v_unsigned_long_pointer = &v_unsigned_long;
+
+  v_float_pointer = &v_float;
+  v_double_pointer = &v_double;
+
+  color = red;
+  clunker = porsche;
+
+  u_link.next = s_link;
+
+  v_struct2.v_int_member = v_struct1.v_int_member;
+  v_union2.v_short_member = v_union.v_short_member;
+
+#ifdef __GNUC__
+  sef.field = s1;
+  uef.field = u1;
+#endif
+}
diff --git a/gdb/testsuite/gdb.base/setvar.exp b/gdb/testsuite/gdb.base/setvar.exp
new file mode 100644
index 0000000..96d3eb4
--- /dev/null
+++ b/gdb/testsuite/gdb.base/setvar.exp
@@ -0,0 +1,420 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1995
+#   Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "setvar"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+#
+# set it up at a breakpoint so we canplay with the variable values
+#
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+# Determine expected output for unsigned long variables,
+# the output varies with sizeof (unsigned long).
+
+set ulong_minus_1 4294967295
+set ulong_minus_456 4294966840
+send_gdb "print sizeof (unsigned long)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4.*$gdb_prompt $" {}
+    -re ".\[0-9\]* = 8.*$gdb_prompt $" {
+	set ulong_minus_1 18446744073709551615
+	set ulong_minus_456 18446744073709551160
+    }
+    -re ".*$gdb_prompt $" {
+	 fail "getting sizeof unsigned long"
+    }
+    default	{ fail "(timeout) getting sizeof unsigned long" }
+}
+
+proc test_set { args } {
+    global gdb_prompt
+
+    set length [expr [llength $args] - 1];
+    set message "[lindex $args $length]";
+    set final [expr $length - 2];
+    set count 1;
+
+    # Set up the variables.
+    for {set x 0;} {$x < $length} {incr x;} {
+	if { "[lindex $args $x]" != "" } {
+	    set arg [lindex $args $x];
+	    if { ($x == $final) || ([string first ".*" [lindex $args [expr $x + 1]]] >= 0) } {
+		set match [lindex $args [expr $x + 1]];
+		if { $count == 1 } {
+		    set mess "$message"
+		} else {
+		    set mess "$message (#$count)";
+		}
+		incr count;
+		incr x;
+	    } else {
+		set mess "";
+		set match ""
+	    }
+	    verbose "doing $arg $match"
+	    if [gdb_test "$arg" "$match" "$mess"] {
+		fail "$message -- $match";
+		return 1;
+	    }
+	}
+    }
+    return 0;
+}
+
+#
+# test "set variable" for type "char"
+#
+# Because bare char types can be either signed or unsigned, we just test the
+# range of values that are common to both (0-127).
+#    
+
+test_set "set variable v_char=0" "print v_char" ".\[0-9\]* = 0 \'.000\'"        "set variable char=0" 
+test_set "set variable v_char=1" "print v_char" ".\[0-9\]* = 1 \'.001\'"        "set variable char=1" 
+test_set "set variable v_char=27" "print v_char" ".\[0-9\]* = 27 \'.e\'"        "set variable char=27 (Esc)" 
+test_set "set variable v_char=32" "print v_char" ".\[0-9\]* = 32 \' \'"        "set variable char=32 (SPC)" 
+test_set "set variable v_char=65" "print v_char" ".\[0-9\]* = 65 \'A\'"        "set variable char=65 ('A')" 
+test_set "set variable v_char=97" "print v_char" ".\[0-9\]* = 97 \'a\'"        "set variable char=97 ('a')" 
+test_set "set variable v_char=126" "print v_char" ".\[0-9\]* = 126 \'~\'"        "set variable char=126 ('~')" 
+test_set "set variable v_char=127" "print v_char" ".\[0-9\]* = 127 \'.177\'"        "set variable char=127 (8-bit)" 
+#
+# test "set variable" for type "signed char"
+#    
+test_set "set variable v_char=0" "print v_signed_char" ".\[0-9\]* = 0 \'.000\'"        "set variable signed char=0" 
+test_set "set variable v_signed_char=1" "print v_signed_char" ".\[0-9\]* = 1 \'.001\'"        "set variable signed char=1" 
+test_set "set variable v_signed_char=27" "print v_signed_char" ".\[0-9\]* = 27 \'.e\'"        "set variable signed char=27 (Esc)" 
+test_set "set variable v_signed_char=32" "print v_signed_char" ".\[0-9\]* = 32 \' \'"        "set variable signed char=32 (SPC)" 
+test_set "set variable v_signed_char=65" "print v_signed_char" ".\[0-9\]* = 65 \'A\'"        "set variable signed char=65 ('A')" 
+test_set "set variable v_signed_char=97" "print v_signed_char" ".\[0-9\]* = 97 \'a\'"        "set variable signed char=97 ('a')" 
+test_set "set variable v_signed_char=126" "print v_signed_char" ".\[0-9\]* = 126 \'~\'"        "set variable signed char=126 ('~')" 
+test_set "set variable v_signed_char=127" "print v_signed_char" ".\[0-9\]* = 127 \'.177\'"        "set variable signed char=127 (8-bit)" 
+gdb_test "set variable v_signed_char=-1" ""
+if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix4*" }
+gdb_test "print v_signed_char" ".\[0-9\]* = -1 \'.377\'" \
+    "set variable signed char=-1 (-1)"
+gdb_test "set variable v_signed_char=0xFF" ""
+if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix4*" }
+gdb_test "print v_signed_char" ".\[0-9\]* = -1 \'.377\'" \
+    "set variable signed char=0xFF (0xFF)"
+#
+# test "set variable" for type "unsigned char"
+#
+test_set "set variable v_unsigned_char=0" "print v_unsigned_char" ".\[0-9\]* = 0 \'.000\'"        "set variable unsigned char=0" 
+test_set "set variable v_unsigned_char=1" "print v_unsigned_char" ".\[0-9\]* = 1 \'.001\'"        "set variable unsigned char=1" 
+test_set "set variable v_unsigned_char=27" "print v_unsigned_char" ".\[0-9\]* = 27 \'.e\'"        "set variable unsigned char=27 (Esc)" 
+test_set "set variable v_unsigned_char=32" "print v_unsigned_char" ".\[0-9\]* = 32 \' \'"        "set variable unsigned char=32 (SPC)" 
+test_set "set variable v_unsigned_char=65" "print v_unsigned_char" ".\[0-9\]* = 65 \'A\'"        "set variable unsigned char=65 ('A')" 
+test_set "set variable v_unsigned_char=97" "print v_unsigned_char" ".\[0-9\]* = 97 \'a\'"        "set variable unsigned char=97 ('a')" 
+test_set "set variable v_unsigned_char=126" "print v_unsigned_char" ".\[0-9\]* = 126 \'~\'"        "set variable unsigned char=126 ('~')" 
+test_set "set variable v_unsigned_char=~0" "print v_unsigned_char" ".\[0-9\]* = 255 \'.377\'"        "set variable unsigned char=255 (8-bit)" 
+#
+# test "set variable" for type "short"
+#
+test_set "set variable v_short=0" "print v_short" ".\[0-9\]* = 0"        "set variable short=0" 
+test_set "set variable v_short=1" "print v_short" ".\[0-9\]* = 1"        "set variable short=1" 
+test_set "set variable v_short=-1" "print v_short" ".\[0-9\]* = -1"        "set variable short=-1 (minus)" 
+#
+# test "set variable" for type "signed short"
+#
+test_set "set variable v_signed_short=0" "print v_signed_short" ".\[0-9\]* = 0"        "set variable signed short=0" 
+test_set "set variable v_signed_short=1" "print v_signed_short" ".\[0-9\]* = 1"        "set variable signed short=1" 
+test_set "set variable v_signed_short=-1" "print v_signed_short" ".\[0-9\]* = -1"        "set variable signed short=-1 (minus)" 
+#
+# test "set variable" for type "unsigned short"
+#
+test_set "set variable v_unsigned_short=0" "print v_unsigned_short" ".\[0-9\]* = 0"        "set variable unsigned short=0" 
+test_set "set variable v_unsigned_short=1" "print v_unsigned_short" ".\[0-9\]* = 1"        "set variable unsigned short=1" 
+test_set "set variable v_unsigned_short=~0" "print v_unsigned_short" ".\[0-9\]* = 65535"        "set variable unsigned short=~0 (minus)" 
+#
+# test "set variable" for type "int"
+#
+test_set "set variable v_int=0" "print v_int" ".\[0-9\]* = 0"        "set variable int=0" 
+test_set "set variable v_int=1" "print v_int" ".\[0-9\]* = 1"        "set variable int=1" 
+test_set "set variable v_int=-1" "print v_int" ".\[0-9\]* = -1"        "set variable int=-1 (minus)" 
+#
+# test "set variable" for type "signed int"
+#
+test_set "set variable v_signed_int=0" "print v_signed_int" ".\[0-9\]* = 0"        "set variable signed int=0" 
+test_set "set variable v_signed_int=1" "print v_signed_int" ".\[0-9\]* = 1"        "set variable signed int=1" 
+test_set "set variable v_signed_int=-1" "print v_signed_int" ".\[0-9\]* = -1"        "set variable signed int=-1 (minus)" 
+#
+# test "set variable" for type "unsigned int"
+#
+test_set "set variable v_unsigned_int=0" "print v_unsigned_int" ".\[0-9\]* = 0"        "set variable unsigned int=0" 
+test_set "set variable v_unsigned_int=1" "print v_unsigned_int" ".\[0-9\]* = 1"        "set variable unsigned int=1" 
+test_set "set variable v_unsigned_int=~0" "print v_unsigned_int" ".\[0-9\]* = (4294967295|65535)"        "set variable unsigned int=~0 (minus)" 
+#test_set ".\[0-9\]* = 65535"        "set variable unsigned int=~0 (minus)" 
+#
+# test "set variable" for type "long"
+#
+test_set "set variable v_long=0" "print v_long" ".\[0-9\]* = 0"        "set variable long=0" 
+test_set "set variable v_long=1" "print v_long" ".\[0-9\]* = 1"        "set variable long=1" 
+test_set "set variable v_long=-1" "print v_long" ".\[0-9\]* = -1"        "set variable long=-1 (minus)" 
+#
+# test "set variable" for type "signed long"
+#
+test_set "set variable v_signed_long=0" "print v_signed_long" ".\[0-9\]* = 0"        "set variable signed long=0" 
+test_set "set variable v_signed_long=1" "print v_signed_long" ".\[0-9\]* = 1"        "set variable signed long=1" 
+test_set "set variable v_signed_long=-1" "print v_signed_long" ".\[0-9\]* = -1"        "set variable signed long=-1 (minus)" 
+#
+# test "set variable" for type "unsigned long"
+#
+test_set "set variable v_unsigned_long=0" "print v_unsigned_long" ".\[0-9\]* = 0"        "set variable unsigned long=0" 
+test_set "set variable v_unsigned_long=1" "print v_unsigned_long" ".\[0-9\]* = 1"        "set variable unsigned long=1" 
+test_set "set variable v_unsigned_long=~0" "print v_unsigned_long" ".\[0-9\]* = $ulong_minus_1"        "set variable unsigned long=~0 (minus)" 
+#
+# test "set variable" for type "float"
+#
+test_set "set variable v_float=0.0" "print v_float" ".\[0-9\]* = 0"        "set variable float=0" 
+test_set "set variable v_float=1.0" "print v_float" ".\[0-9\]* = 1"        "set variable float=1" 
+test_set "set variable v_float=-1.0" "print v_float" ".\[0-9\]* = -1"        "set variable float=-1 (minus)" 
+#
+# test "set variable" for type "double"
+#
+test_set "set variable v_double=0.0" "print v_double" ".\[0-9\]* = 0"        "set variable double=0" 
+test_set "set variable v_double=1.0" "print v_double" ".\[0-9\]* = 1"        "set variable double=1" 
+test_set "set variable v_double=-1.0" "print v_double" ".*.\[0-9\]* = -1"        "set variable double=-1 (minus)" 
+#
+# test "set variable" for "char array[2]"
+#
+test_set "set variable v_char_array\[0\]='h'" "set variable v_char_array\[1\]='i'" "print v_char_array" ".*.\[0-9\]* =.*\"hi\""        "set variable char array=\"hi\" (string)" 
+#
+# test "set variable" for "signed char array[2]"
+#
+test_set "set variable v_signed_char_array\[0\]='h'" "set variable v_signed_char_array\[1\]='i'" "print v_signed_char_array" ".*.\[0-9\]* =.*\"hi\""        "set variable signed char array=\"hi\" (string)" 
+#
+# test "set variable" for "unsigned char array[2]"
+#
+test_set "set variable v_unsigned_char_array\[0\]='h'" "set variable v_unsigned_char_array\[1\]='i'" "print v_unsigned_char_array" ".*.\[0-9\]* =.*\"hi\""        "set variable unsigned char array=\"hi\" (string)" 
+#
+# test "set variable" for "short array[2]"
+#
+test_set "set variable v_short_array\[0\]=123" "set variable v_short_array\[1\]=-456" "print v_short_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable short array" 
+#
+# test "set variable" for "signed short array[2]"
+#
+test_set "set variable v_signed_short_array\[0\]=123" "set variable v_signed_short_array\[1\]=-456" "print v_signed_short_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable signed short array" 
+#
+# test "set variable" for "unsigned short array[2]"
+#
+test_set "set variable v_unsigned_short_array\[0\]=123" "set variable v_unsigned_short_array\[1\]=-456" "print v_unsigned_short_array" ".*.\[0-9\]* =.*\{123,.*65080\}"        "set variable unsigned short array" 
+#
+# test "set variable" for "int array[2]"
+#
+test_set "set variable v_int_array\[0\]=123" "set variable v_int_array\[1\]=-456" "print v_int_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable int array" 
+#
+# test "set variable" for "signed int array[2]"
+#
+test_set "set variable v_signed_int_array\[0\]=123" "set variable v_signed_int_array\[1\]=-456" "print v_signed_int_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable signed int array" 
+#
+# test "set variable" for "unsigned int array[2]"
+#
+test_set "set variable v_unsigned_int_array\[0\]=123" "set variable v_unsigned_int_array\[1\]=-456" "print v_unsigned_int_array" ".*.\[0-9\]* =.*\{123,.*(4294966840|65080)\}"        "set variable unsigned int array" 
+#
+# test "set variable" for "long array[2]"
+#
+test_set "set variable v_long_array\[0\]=123" "set variable v_long_array\[1\]=-456" "print v_long_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable long array" 
+#
+# test "set variable" for "signed long array[2]"
+#
+test_set "set variable v_signed_long_array\[0\]=123" "set variable v_signed_long_array\[1\]=-456" "print v_signed_long_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable signed long array" 
+#
+# test "set variable" for "unsigned long array[2]"
+#
+test_set "set variable v_unsigned_long_array\[0\]=123" "set variable v_unsigned_long_array\[1\]=-456" "print v_unsigned_long_array" ".*.\[0-9\]* =.*\{123,.*$ulong_minus_456\}"        "set variable unsigned long array" 
+#
+# test "set variable" for "float array[2]"
+#
+test_set "set variable v_float_array\[0\]=123.0" "set variable v_float_array\[1\]=-456.0" "print v_float_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable float array" 
+#
+# test "set variable" for "double array[2]"
+#
+test_set "set variable v_double_array\[0\]=123.0" "set variable v_double_array\[1\]=-456.0" "print v_double_array" ".*.\[0-9\]* =.*\{123,.*-456\}"        "set variable double array" 
+#
+# test "set variable" for type "char *"
+#
+test_set "set v_char_pointer=v_char_array" "set variable *(v_char_pointer)='h'" "set variable *(v_char_pointer+1)='i'" "print v_char_array" ".*.\[0-9\]* =.*\"hi\""  "print *(v_char_pointer+1)" ".*.\[0-9\]* = 105 \'i\'"     "set variable char pointer=\"hi\" (string)" 
+#
+# test "set variable" for type "signed char *"
+#
+test_set "set v_signed_char_pointer=v_signed_char_array" "set variable *(v_signed_char_pointer)='h'" "set variable *(v_signed_char_pointer+1)='i'" "print v_signed_char_array" ".*.\[0-9\]* =.*\"hi\""  "print *(v_signed_char_pointer+1)" ".*.\[0-9\]* = 105 \'i\'"     "set variable signed char pointer=\"hi\" (string)" 
+#
+# test "set variable" for type "unsigned char *"
+#
+test_set "set v_unsigned_char_pointer=v_unsigned_char_array" "set variable *(v_unsigned_char_pointer)='h'" "set variable *(v_unsigned_char_pointer+1)='i'" "print v_unsigned_char_array" ".*.\[0-9\]* =.*\"hi\""  "print *(v_unsigned_char_pointer+1)" ".*.\[0-9\]* = 105 \'i\'"     "set variable unsigned char pointer=\"hi\" (string)" 
+#
+# test "set variable" for type "short *"
+#
+test_set "set v_short_pointer=v_short_array" "set variable *(v_short_pointer)=123" "set variable *(v_short_pointer+1)=-456" "print v_short_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_short_pointer+1)" ".*.\[0-9\]* = -456"     "set variable short pointer" 
+#
+# test "set variable" for type "signed short *"
+#
+gdb_test "set v_signed_short_pointer=v_signed_short_array" ""
+gdb_test "set variable *(v_signed_short_pointer)=123" ""
+gdb_test "set variable *(v_signed_short_pointer+1)=-456" ""
+gdb_test "print v_signed_short_array" ".\[0-9\]* =.*\{123,.*-456\}" \
+    "set variable signed short pointer"
+gdb_test "print *(v_signed_short_pointer+1)" ".\[0-9\]*.*=.*-456"
+#
+# test "set variable" for type "unsigned short *"
+#
+gdb_test "set v_unsigned_short_pointer=v_unsigned_short_array" ""
+gdb_test "set variable *(v_unsigned_short_pointer)=123" ""
+gdb_test "set variable *(v_unsigned_short_pointer+1)=-456" ""
+gdb_test "print v_unsigned_short_array" ".\[0-9\]* =.*\{123,.*65080\}" \
+    "set variable unsigned short pointer"
+gdb_test "print *(v_unsigned_short_pointer+1)" ".\[0-9\]* = 65080"
+#
+# test "set variable" for type "int *"
+#
+test_set "set v_int_pointer=v_int_array" "set variable *(v_int_pointer)=123" "set variable *(v_int_pointer+1)=-456" "print v_int_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_int_pointer+1)" ".*.\[0-9\]* = -456"     "set variable int pointer" 
+#
+# test "set variable" for type "signed int *"
+#
+test_set "set v_signed_int_pointer=v_signed_int_array" "set variable *(v_signed_int_pointer)=123" "set variable *(v_signed_int_pointer+1)=-456" "print v_signed_int_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_signed_int_pointer+1)" ".*.\[0-9\]* = -456"     "set variable signed int pointer" 
+#
+# test "set variable" for type "unsigned int *"
+#
+test_set "set v_unsigned_int_pointer=v_unsigned_int_array" "set variable *(v_unsigned_int_pointer)=123" "set variable *(v_unsigned_int_pointer+1)=-456" "print v_unsigned_int_array" ".*.\[0-9\]* =.*\{123,.*(4294966840|65080)\}" "set variable unsigned int pointer"
+test_set "" "print *(v_unsigned_int_pointer+1)" ".*.\[0-9\]* = (4294966840|65080)"     "print variable unsigned int pointer+1"
+#
+# test "set variable" for type "long *"
+#
+test_set "set v_long_pointer=v_long_array" "set variable *(v_long_pointer)=123" "set variable *(v_long_pointer+1)=-456" "print v_long_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_long_pointer+1)" ".*.\[0-9\]* = -456"     "set variable long pointer" 
+#
+# test "set variable" for type "signed long *"
+#
+test_set "set v_signed_long_pointer=v_signed_long_array" "set variable *(v_signed_long_pointer)=123" "set variable *(v_signed_long_pointer+1)=-456" "print v_signed_long_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_signed_long_pointer+1)" ".*.\[0-9\]* = -456"     "set variable signed long pointer" 
+#
+# test "set variable" for type "unsigned long *"
+#
+test_set "set v_unsigned_long_pointer=v_unsigned_long_array" "set variable *(v_unsigned_long_pointer)=123" "set variable *(v_unsigned_long_pointer+1)=-456" "print v_unsigned_long_array" ".*.\[0-9\]* =.*\{123,.*$ulong_minus_456\}"  "print *(v_unsigned_long_pointer+1)" ".*.\[0-9\]* = $ulong_minus_456"     "set variable unsigned long pointer" 
+#
+# test "set variable" for type "float *"
+#
+test_set "set v_float_pointer=v_float_array" "set variable *(v_float_pointer)=123.0" "set variable *(v_float_pointer+1)=-456.0" "print v_float_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_float_pointer+1)" ".*.\[0-9\]* = -456"     "set variable float pointer" 
+#
+# test "set variable" for type "double *"
+#
+test_set "set v_double_pointer=v_double_array" "set variable *(v_double_pointer)=123.0" "set variable *(v_double_pointer+1)=-456.0" "print v_double_array" ".*.\[0-9\]* =.*\{123,.*-456\}"  "print *(v_double_pointer+1)" ".*.\[0-9\]* = -456"     "set variable double pointer" 
+#
+# test "set variable" for struct members
+#
+test_set "set variable v_struct1.v_char_member='h'" "print v_struct1.v_char_member" ".*.\[0-9\]* = 104 \'h\'"        "set variable structure char member" 
+test_set "set variable v_struct1.v_short_member=1" "print v_struct1.v_short_member" ".*.\[0-9\]* = 1"        "set variable structure short member" 
+test_set "set variable v_struct1.v_int_member=2" "print v_struct1.v_int_member" ".*.\[0-9\]* = 2"        "set variable structure int member" 
+test_set "set variable v_struct1.v_long_member=3" "print v_struct1.v_long_member" ".*.\[0-9\]* = 3"        "set variable structure long member" 
+test_set "set variable v_struct1.v_float_member=4.0" "print v_struct1.v_float_member" ".*.\[0-9\]* = 4"        "set variable structure float member" 
+test_set "set variable v_struct1.v_double_member=5.0" "print v_struct1.v_double_member" ".*.\[0-9\]* = 5"        "set variable structure double member" 
+
+gdb_test "print v_struct1" \
+  ".*.\[0-9\]* = \{.*v_char_member = 104 \'h\',.*v_short_member = 1,\
+.*v_int_member = 2,.*\
+v_long_member = 3,.*v_float_member = 4,.*v_double_member = 5.*\}" \
+  "set print structure #1"
+
+# This should be an error.  GCC extensions for structure constants require
+# the type of the structure to be specified, as in
+# v_struct1 = (struct t_struct) {32, 33, 34, 35, 36, 37}
+# GDB should do the same if it wants to provide this feature.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "set variable v_struct1 = {32, 33, 34, 35, 36, 37}"
+    continue
+}
+gdb_test "set variable v_struct1 = {32, 33, 34, 35, 36, 37}" "Invalid.*"
+
+# And after the error the structure should be unchanged.
+gdb_test "print v_struct1" \
+  ".*.\[0-9\]* = \{.*v_char_member = 104 \'h\',.*v_short_member = 1,\
+.*v_int_member = 2,.*\
+v_long_member = 3,.*v_float_member = 4,.*v_double_member = 5.*\}" \
+  "set print structure #2"
+
+# Test printing of enumeration bitfields.
+# GNU C supports them, some other compilers don't.
+
+if {$gcc_compiled} then {
+    gdb_test "print sef.field=sm1" ".*.\[0-9\]* = sm1"
+    gdb_test "print sef.field" ".*.\[0-9\]* = sm1" "print sef.field (sm1)"
+    gdb_test "print sef.field=s1" ".*.\[0-9\]* = s1"
+    gdb_test "print sef.field" ".*.\[0-9\]* = s1" "print sef.field (s1)"
+    gdb_test "print uef.field=u2" ".*.\[0-9\]* = u2"
+    gdb_test "print uef.field" ".*.\[0-9\]* = u2" "print uef.field (u2)"
+    gdb_test "print uef.field=u1" ".*.\[0-9\]* = u1"
+    gdb_test "print uef.field" ".*.\[0-9\]* = u1" "print uef.field (u1)"
+
+    # Test for truncation when assigning invalid values to bitfields.
+    gdb_test "print sef.field=7" \
+	".*warning: Value does not fit in 2 bits.*\[0-9\]* = sm1"
+    gdb_test "print uef.field=6" \
+	".*warning: Value does not fit in 2 bits.*\[0-9\]* = u2"
+}
diff --git a/gdb/testsuite/gdb.base/shlib-call.exp b/gdb/testsuite/gdb.base/shlib-call.exp
new file mode 100644
index 0000000..414d742
--- /dev/null
+++ b/gdb/testsuite/gdb.base/shlib-call.exp
@@ -0,0 +1,258 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# file to test calls into shared libraries
+# the source files for this test are:
+#
+# shmain.c
+# shr1.c (shared lib)
+# shr2.c (shared lib)
+# ss.h (header for shr2.c)
+#
+# file written by Elena Zannoni: elz@ch.apollo.com
+#
+
+#debug shmain
+#prop lib shr1.sl
+#prop lib shr2.sl
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board?
+if ![isnative] then {
+    return 0
+}
+
+set testfile "shmain"
+set libfile "shr"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+# Build the shared libraries this test case needs.
+#
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=+z"
+    } else {
+	# don't know what the compiler is...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags "additional_flags=-fpic"
+}
+
+if {[gdb_compile "${srcdir}/${subdir}/${libfile}1.c" "${objdir}/${subdir}/${libfile}1.o" object [list debug $additional_flags]] != ""} {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if {[gdb_compile "${srcdir}/${subdir}/${libfile}2.c" "${objdir}/${subdir}/${libfile}2.o" object [list debug $additional_flags]] != ""} {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [istarget "hppa*-*-hpux*"] {
+    remote_exec build "ld -b ${objdir}/${subdir}/${libfile}1.o -o ${objdir}/${subdir}/${libfile}1.sl"
+    remote_exec build "ld -b ${objdir}/${subdir}/${libfile}2.o -o ${objdir}/${subdir}/${libfile}2.sl"
+} else {
+    set additional_flags "additional_flags=-shared"
+    if {[gdb_compile "${objdir}/${subdir}/${libfile}1.o" "${objdir}/${subdir}/${libfile}1.sl" executable [list debug $additional_flags]] != ""} {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    if {[gdb_compile "${objdir}/${subdir}/${libfile}2.o" "${objdir}/${subdir}/${libfile}2.sl" executable [list debug $additional_flags]] != ""} {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+if {[gdb_compile "${objdir}/${subdir}/${testfile}.o ${objdir}/${subdir}/${libfile}1.sl ${objdir}/${subdir}/${libfile}2.sl" "${binfile}" executable {debug}] != ""} {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+
+if ![runto_main] then {
+        perror "C function calling tests suppressed"
+}
+
+
+#step -over
+
+    send_gdb "next\n"
+    gdb_expect {
+        -re ".*g = shr1\\(g\\).*$gdb_prompt $" {pass "next to shr2"}
+        -re ".*$gdb_prompt $" { fail "next to shr2" }
+        timeout { fail "next to shr2 (timeout)" }
+    }
+
+
+
+#print g
+
+send_gdb "print g\n"
+gdb_expect {
+    -re ".*\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print g"
+      }
+    -re ".*$gdb_prompt $" { fail "print  g" }
+    timeout           { fail "(timeout) print g" }
+  }
+
+
+#step -over
+    send_gdb "next\n"
+    gdb_expect {
+        -re ".*address of sgs is $hex.*g = shr2\\(g\\).*$gdb_prompt $" {
+             pass "next over shr1" }
+        -re ".*$gdb_prompt $" { fail "next over shr1" }
+        timeout { fail "next over shr1 (timeout)" }
+    }
+
+#print g
+send_gdb "print g\n"
+gdb_expect {
+    -re ".*\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print g" }
+    -re ".*$gdb_prompt $" { fail "print  g" }
+    timeout           { fail "(timeout) print g" }
+  }
+
+#print shr1(1)
+send_gdb "print shr1(1)\n"
+gdb_expect {
+    -re ".*address of sgs is $hex.*\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print shr1(1)" }
+    -re ".*$gdb_prompt $" { fail "print  shr1(1)" }
+    timeout           { fail "(timeout) print shr1(1)" }
+  }
+
+#print shr1(g)
+send_gdb "print shr1(g)\n"
+gdb_expect {
+    -re ".*address of sgs is $hex.*\[0-9\]* = 4.*$gdb_prompt $" {
+        pass "print shr1(g)" }
+    -re ".*$gdb_prompt $" { fail "print  shr1(g)" }
+    timeout           { fail "(timeout) print shr1(g)" }
+  }
+
+#break shr2
+#go
+gdb_test "break shr2" \
+    "Breakpoint.*file.*shr2.c, line.*" \
+    "breakpoint function shr2"
+
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, shr2 \\(.*\\) at.*shr2\\.c:3.*3.*return 2.x;" \
+"run until breakpoint set at a function"
+
+
+#print shr1(1)
+send_gdb "print shr1(1)\n"
+gdb_expect {
+    -re ".*address of sgs is $hex.*\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print shr1(1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print  shr1(1)" }
+    timeout           { fail "(timeout) print shr1(1)" }
+  }
+
+#print mainshr1(1)
+send_gdb "print mainshr1(1)\n"
+gdb_expect {
+    -re ".*\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print mainshr1(1) from shlib func"
+      }
+    -re ".*$gdb_prompt $" { fail "print  mainshr1(1) from shlib func" }
+    timeout           { fail "(timeout) print mainshr1(1) from shlib func" }
+  }
+
+#step -return
+    send_gdb "step\n"
+    gdb_expect {
+        -re ".*\\\}.*$gdb_prompt $" { pass "step inside shr2 (shlib func)"}
+        -re ".*$gdb_prompt $" { fail "step inside shr2 (shlib func)" }
+        timeout { fail "step inside shr2 (shlib func) (timeout)" }
+    }
+    
+    send_gdb "step\n"
+    gdb_expect {
+        -re "main \\(\\) at.*g = mainshr1\\(g\\);.*$gdb_prompt $" { pass "step out of shr2 to main"}
+        -re ".*$gdb_prompt $" { fail "step out of shr2 to main" }
+        timeout { fail "step out of shr2 to main (timeout)" }
+    }
+
+#print mainshr1(1)
+send_gdb "print mainshr1(1)\n"
+gdb_expect {
+    -re ".*\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print mainshr1(1)"
+      }
+    -re ".*$gdb_prompt $" { fail "print  mainshr1(1) from main" }
+    timeout           { fail "(timeout) print mainshr1(1) from main" }
+  }
+
+#step
+    send_gdb "step\n"
+    gdb_expect {
+        -re ".*mainshr1 \\(g=4\\) at.*return 2.g;.*$gdb_prompt $" { pass "step into mainshr1"}
+        -re ".*$gdb_prompt $" { fail "step into mainshr1" }
+        timeout { fail "step into mainshr1 (timeout)" }
+    }
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+# PR's 16495, 18213
+# test that we can re-set breakpoints in shared libraries
+gdb_test "break shr1" "Breakpoint 1 at .*" "set bp in shared library"
+gdb_test "run" "Starting program:.*Breakpoint 1,.*" "run to bp in shared library"
+gdb_test "cont" "Program exited normally."
+gdb_test "run" "Starting program:.*Breakpoint 1,.*" "re-run to bp in shared library (PR's 16495, 18213)"
+gdb_test "cont" "Program exited normally."
+
+return 0
diff --git a/gdb/testsuite/gdb.base/shmain.c b/gdb/testsuite/gdb.base/shmain.c
new file mode 100644
index 0000000..dda5091
--- /dev/null
+++ b/gdb/testsuite/gdb.base/shmain.c
@@ -0,0 +1,47 @@
+/* A test */
+
+#include "ss.h"
+#include <stdio.h>
+
+extern int shr1();
+extern int shr2();
+extern float sg;
+
+int eglob;
+
+struct {
+ int a;  
+ int b;
+} s;
+
+int g;
+
+int local_structarg(x)
+struct s x;
+{
+  return x.b;
+}
+
+main()
+{
+  struct s y;
+  g = 1;
+  g = shr1(g);
+  g = shr2(g);
+  g = mainshr1(g);
+  sg = 1.1;
+  printf("address of sg is 0x%x\n", &sg);
+  y.a = 3;
+  y.b = 4;
+  g = local_structarg(y);
+  g = structarg(y);
+  g = pstructarg(&y);
+
+  return (0);
+}
+
+int mainshr1(g)
+int g;
+{
+  return 2*g;
+}
diff --git a/gdb/testsuite/gdb.base/shr1.c b/gdb/testsuite/gdb.base/shr1.c
new file mode 100644
index 0000000..0efaff5
--- /dev/null
+++ b/gdb/testsuite/gdb.base/shr1.c
@@ -0,0 +1,47 @@
+#include "ss.h"
+#include <stdio.h>
+
+typedef float f;
+
+float sg = 5.5;
+int sgi = 2;
+static int sgs = 7;
+
+int shr1(x)
+int x;
+{
+  f mumble;
+  int l;
+  l = 1;
+  {
+    int l;
+    l = 2;
+  }
+  mumble = 7.7;
+  sg = 6.6;
+  sgi++;
+  sgs = 8;
+  printf("address of sgs is 0x%x\n", &sgs);
+  return 2*x;
+}
+
+static int shr1_local(x)
+int x;
+{
+  return 2*x;
+}
+
+int structarg(x)
+struct s x;
+{
+  return x.a;
+}
+
+int pstructarg(x)
+struct s *x;
+{
+  return x->a;
+}
+
+
+
diff --git a/gdb/testsuite/gdb.base/shr2.c b/gdb/testsuite/gdb.base/shr2.c
new file mode 100644
index 0000000..94d5df9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/shr2.c
@@ -0,0 +1,11 @@
+int shr2(x)
+{
+  return 2*x;
+}
+
+int shr2_local(x)
+{
+  return 2*x;
+}
+
+
diff --git a/gdb/testsuite/gdb.base/sigall.c b/gdb/testsuite/gdb.base/sigall.c
new file mode 100644
index 0000000..1ab08e7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sigall.c
@@ -0,0 +1,1383 @@
+#include <signal.h>
+
+#ifdef __sh__
+#define signal(a,b)	/* Signals not supported on this target - make them go away */
+#endif
+
+/* Signal handlers, we set breakpoints in them to make sure that the
+   signals really get delivered.  */
+
+void
+handle_ABRT (sig)
+     int sig;
+{
+}
+
+void
+handle_HUP (sig)
+     int sig;
+{
+}
+
+void
+handle_QUIT (sig)
+     int sig;
+{
+}
+
+void
+handle_ILL (sig)
+     int sig;
+{
+}
+
+void
+handle_EMT (sig)
+     int sig;
+{
+}
+
+void
+handle_FPE (sig)
+     int sig;
+{
+}
+
+void
+handle_BUS (sig)
+     int sig;
+{
+}
+
+void
+handle_SEGV (sig)
+     int sig;
+{
+}
+
+void
+handle_SYS (sig)
+     int sig;
+{
+}
+
+void
+handle_PIPE (sig)
+     int sig;
+{
+}
+
+void
+handle_ALRM (sig)
+     int sig;
+{
+}
+
+void
+handle_URG (sig)
+     int sig;
+{
+}
+
+void
+handle_TSTP (sig)
+     int sig;
+{
+}
+
+void
+handle_CONT (sig)
+     int sig;
+{
+}
+
+void
+handle_CHLD (sig)
+     int sig;
+{
+}
+
+void
+handle_TTIN (sig)
+     int sig;
+{
+}
+
+void
+handle_TTOU (sig)
+     int sig;
+{
+}
+
+void
+handle_IO (sig)
+     int sig;
+{
+}
+
+void
+handle_XCPU (sig)
+     int sig;
+{
+}
+
+void
+handle_XFSZ (sig)
+     int sig;
+{
+}
+
+void
+handle_VTALRM (sig)
+     int sig;
+{
+}
+
+void
+handle_PROF (sig)
+     int sig;
+{
+}
+
+void
+handle_WINCH (sig)
+     int sig;
+{
+}
+
+void
+handle_LOST (sig)
+     int sig;
+{
+}
+
+void
+handle_USR1 (sig)
+     int sig;
+{
+}
+
+void
+handle_USR2 (sig)
+     int sig;
+{
+}
+
+void
+handle_PWR (sig)
+     int sig;
+{
+}
+
+void
+handle_POLL (sig)
+     int sig;
+{
+}
+
+void
+handle_WIND (sig)
+     int sig;
+{
+}
+
+void
+handle_PHONE (sig)
+     int sig;
+{
+}
+
+void
+handle_WAITING (sig)
+     int sig;
+{
+}
+
+void
+handle_LWP (sig)
+     int sig;
+{
+}
+
+void
+handle_DANGER (sig)
+     int sig;
+{
+}
+
+void
+handle_GRANT (sig)
+     int sig;
+{
+}
+
+void
+handle_RETRACT (sig)
+     int sig;
+{
+}
+
+void
+handle_MSG (sig)
+     int sig;
+{
+}
+
+void
+handle_SOUND (sig)
+     int sig;
+{
+}
+
+void
+handle_SAK (sig)
+     int sig;
+{
+}
+
+void
+handle_PRIO (sig)
+     int sig;
+{
+}
+
+void
+handle_33 (sig)
+     int sig;
+{
+}
+
+void
+handle_34 (sig)
+     int sig;
+{
+}
+
+void
+handle_35 (sig)
+     int sig;
+{
+}
+
+void
+handle_36 (sig)
+     int sig;
+{
+}
+
+void
+handle_37 (sig)
+     int sig;
+{
+}
+
+void
+handle_38 (sig)
+     int sig;
+{
+}
+
+void
+handle_39 (sig)
+     int sig;
+{
+}
+
+void
+handle_40 (sig)
+     int sig;
+{
+}
+
+void
+handle_41 (sig)
+     int sig;
+{
+}
+
+void
+handle_42 (sig)
+     int sig;
+{
+}
+
+void
+handle_43 (sig)
+     int sig;
+{
+}
+
+void
+handle_44 (sig)
+     int sig;
+{
+}
+
+void
+handle_45 (sig)
+     int sig;
+{
+}
+
+void
+handle_46 (sig)
+     int sig;
+{
+}
+
+void
+handle_47 (sig)
+     int sig;
+{
+}
+
+void
+handle_48 (sig)
+     int sig;
+{
+}
+
+void
+handle_49 (sig)
+     int sig;
+{
+}
+
+void
+handle_50 (sig)
+     int sig;
+{
+}
+
+void
+handle_51 (sig)
+     int sig;
+{
+}
+
+void
+handle_52 (sig)
+     int sig;
+{
+}
+
+void
+handle_53 (sig)
+     int sig;
+{
+}
+
+void
+handle_54 (sig)
+     int sig;
+{
+}
+
+void
+handle_55 (sig)
+     int sig;
+{
+}
+
+void
+handle_56 (sig)
+     int sig;
+{
+}
+
+void
+handle_57 (sig)
+     int sig;
+{
+}
+
+void
+handle_58 (sig)
+     int sig;
+{
+}
+
+void
+handle_59 (sig)
+     int sig;
+{
+}
+
+void
+handle_60 (sig)
+     int sig;
+{
+}
+
+void
+handle_61 (sig)
+     int sig;
+{
+}
+
+void
+handle_62 (sig)
+     int sig;
+{
+}
+
+void
+handle_63 (sig)
+     int sig;
+{
+}
+
+void
+handle_TERM (sig)
+     int sig;
+{
+}
+
+/* Functions to send signals.  These also serve as markers.  */
+int
+gen_ABRT ()
+{
+  kill (getpid (), SIGABRT);
+}  
+
+int
+gen_HUP ()
+{
+#ifdef SIGHUP
+  kill (getpid (), SIGHUP);
+#else
+  handle_HUP (0);
+#endif
+}  
+
+int
+gen_QUIT ()
+{
+#ifdef SIGQUIT
+  kill (getpid (), SIGQUIT);
+#else
+  handle_QUIT (0);
+#endif
+}
+
+int
+gen_ILL ()
+{
+#ifdef SIGILL
+  kill (getpid (), SIGILL);
+#else
+  handle_ILL (0);
+#endif
+}
+
+int
+gen_EMT ()
+{
+#ifdef SIGEMT
+  kill (getpid (), SIGEMT);
+#else
+  handle_EMT (0);
+#endif
+}
+
+int x;
+
+int
+gen_FPE ()
+{
+  /* The intent behind generating SIGFPE this way is to check the mapping
+     from the CPU exception itself to the signals.  It would be nice to
+     do the same for SIGBUS, SIGSEGV, etc., but I suspect that even this
+     test might turn out to be insufficiently portable.  */
+
+#if 0
+  /* Loses on the PA because after the signal handler executes we try to
+     re-execute the failing instruction again.  Perhaps we could siglongjmp
+     out of the signal handler?  */
+  /* The expect script looks for the word "kill"; don't delete it.  */
+  return 5 / x; /* and we both started jumping up and down yelling kill */
+#else
+  kill (getpid (), SIGFPE);
+#endif
+}
+
+int
+gen_BUS ()
+{
+#ifdef SIGBUS
+  kill (getpid (), SIGBUS);
+#else
+  handle_BUS (0);
+#endif
+}
+
+int
+gen_SEGV ()
+{
+#ifdef SIGSEGV
+  kill (getpid (), SIGSEGV);
+#else
+  handle_SEGV (0);
+#endif
+}
+
+int
+gen_SYS ()
+{
+#ifdef SIGSYS
+  kill (getpid (), SIGSYS);
+#else
+  handle_SYS (0);
+#endif
+}
+
+int
+gen_PIPE ()
+{
+#ifdef SIGPIPE
+  kill (getpid (), SIGPIPE);
+#else
+  handle_PIPE (0);
+#endif
+}
+
+int
+gen_ALRM ()
+{
+#ifdef SIGALRM
+  kill (getpid (), SIGALRM);
+#else
+  handle_ALRM (0);
+#endif
+}
+
+int
+gen_URG ()
+{
+#ifdef SIGURG
+  kill (getpid (), SIGURG);
+#else
+  handle_URG (0);
+#endif
+}
+
+int
+gen_TSTP ()
+{
+#ifdef SIGTSTP
+  kill (getpid (), SIGTSTP);
+#else
+  handle_TSTP (0);
+#endif
+}
+
+int
+gen_CONT ()
+{
+#ifdef SIGCONT
+  kill (getpid (), SIGCONT);
+#else
+  handle_CONT (0);
+#endif
+}
+
+int
+gen_CHLD ()
+{
+#ifdef SIGCHLD
+  kill (getpid (), SIGCHLD);
+#else
+  handle_CHLD (0);
+#endif
+}
+
+int
+gen_TTIN ()
+{
+#ifdef SIGTTIN
+  kill (getpid (), SIGTTIN);
+#else
+  handle_TTIN (0);
+#endif
+}
+
+int
+gen_TTOU ()
+{
+#ifdef SIGTTOU
+  kill (getpid (), SIGTTOU);
+#else
+  handle_TTOU (0);
+#endif
+}
+
+int
+gen_IO ()
+{
+#ifdef SIGIO
+  kill (getpid (), SIGIO);
+#else
+  handle_IO (0);
+#endif
+}
+
+int
+gen_XCPU ()
+{
+#ifdef SIGXCPU
+  kill (getpid (), SIGXCPU);
+#else
+  handle_XCPU (0);
+#endif
+}
+
+int
+gen_XFSZ ()
+{
+#ifdef SIGXFSZ
+  kill (getpid (), SIGXFSZ);
+#else
+  handle_XFSZ (0);
+#endif
+}
+
+int
+gen_VTALRM ()
+{
+#ifdef SIGVTALRM
+  kill (getpid (), SIGVTALRM);
+#else
+  handle_VTALRM (0);
+#endif
+}
+
+int
+gen_PROF ()
+{
+#ifdef SIGPROF
+  kill (getpid (), SIGPROF);
+#else
+  handle_PROF (0);
+#endif
+}
+
+int
+gen_WINCH ()
+{
+#ifdef SIGWINCH
+  kill (getpid (), SIGWINCH);
+#else
+  handle_WINCH (0);
+#endif
+}
+
+int
+gen_LOST ()
+{
+#if defined(SIGLOST) && (!defined(SIGABRT) || SIGLOST != SIGABRT)
+  kill (getpid (), SIGLOST);
+#else
+  handle_LOST (0);
+#endif
+}
+
+int
+gen_USR1 ()
+{
+#ifdef SIGUSR1
+  kill (getpid (), SIGUSR1);
+#else
+  handle_USR1 (0);
+#endif
+}
+
+int
+gen_USR2 ()
+{
+#ifdef SIGUSR2
+  kill (getpid (), SIGUSR2);
+#else
+  handle_USR2 (0);
+#endif
+}  
+
+int
+gen_PWR ()
+{
+#ifdef SIGPWR
+  kill (getpid (), SIGPWR);
+#else
+  handle_PWR (0);
+#endif
+}
+
+int
+gen_POLL ()
+{
+#if defined (SIGPOLL) && (!defined (SIGIO) || SIGPOLL != SIGIO)
+  kill (getpid (), SIGPOLL);
+#else
+  handle_POLL (0);
+#endif
+}
+
+int
+gen_WIND ()
+{
+#ifdef SIGWIND
+  kill (getpid (), SIGWIND);
+#else
+  handle_WIND (0);
+#endif
+}
+
+int
+gen_PHONE ()
+{
+#ifdef SIGPHONE
+  kill (getpid (), SIGPHONE);
+#else
+  handle_PHONE (0);
+#endif
+}
+
+int
+gen_WAITING ()
+{
+#ifdef SIGWAITING
+  kill (getpid (), SIGWAITING);
+#else
+  handle_WAITING (0);
+#endif
+}
+
+int
+gen_LWP ()
+{
+#ifdef SIGLWP
+  kill (getpid (), SIGLWP);
+#else
+  handle_LWP (0);
+#endif
+}
+
+int
+gen_DANGER ()
+{
+#ifdef SIGDANGER
+  kill (getpid (), SIGDANGER);
+#else
+  handle_DANGER (0);
+#endif
+}
+
+int
+gen_GRANT ()
+{
+#ifdef SIGGRANT
+  kill (getpid (), SIGGRANT);
+#else
+  handle_GRANT (0);
+#endif
+}
+
+int
+gen_RETRACT ()
+{
+#ifdef SIGRETRACT
+  kill (getpid (), SIGRETRACT);
+#else
+  handle_RETRACT (0);
+#endif
+}
+
+int
+gen_MSG ()
+{
+#ifdef SIGMSG
+  kill (getpid (), SIGMSG);
+#else
+  handle_MSG (0);
+#endif
+}
+
+int
+gen_SOUND ()
+{
+#ifdef SIGSOUND
+  kill (getpid (), SIGSOUND);
+#else
+  handle_SOUND (0);
+#endif
+}
+
+int
+gen_SAK ()
+{
+#ifdef SIGSAK
+  kill (getpid (), SIGSAK);
+#else
+  handle_SAK (0);
+#endif
+}
+
+int
+gen_PRIO ()
+{
+#ifdef SIGPRIO
+  kill (getpid (), SIGPRIO);
+#else
+  handle_PRIO (0);
+#endif
+}
+
+int
+gen_33 ()
+{
+#ifdef SIG33
+  kill (getpid (), 33);
+#else
+  handle_33 (0);
+#endif
+}
+
+int
+gen_34 ()
+{
+#ifdef SIG34
+  kill (getpid (), 34);
+#else
+  handle_34 (0);
+#endif
+}
+
+int
+gen_35 ()
+{
+#ifdef SIG35
+  kill (getpid (), 35);
+#else
+  handle_35 (0);
+#endif
+}
+
+int
+gen_36 ()
+{
+#ifdef SIG36
+  kill (getpid (), 36);
+#else
+  handle_36 (0);
+#endif
+}
+
+int
+gen_37 ()
+{
+#ifdef SIG37
+  kill (getpid (), 37);
+#else
+  handle_37 (0);
+#endif
+}
+
+int
+gen_38 ()
+{
+#ifdef SIG38
+  kill (getpid (), 38);
+#else
+  handle_38 (0);
+#endif
+}
+
+int
+gen_39 ()
+{
+#ifdef SIG39
+  kill (getpid (), 39);
+#else
+  handle_39 (0);
+#endif
+}
+
+int
+gen_40 ()
+{
+#ifdef SIG40
+  kill (getpid (), 40);
+#else
+  handle_40 (0);
+#endif
+}
+
+int
+gen_41 ()
+{
+#ifdef SIG41
+  kill (getpid (), 41);
+#else
+  handle_41 (0);
+#endif
+}
+
+int
+gen_42 ()
+{
+#ifdef SIG42
+  kill (getpid (), 42);
+#else
+  handle_42 (0);
+#endif
+}
+
+int
+gen_43 ()
+{
+#ifdef SIG43
+  kill (getpid (), 43);
+#else
+  handle_43 (0);
+#endif
+}
+
+int
+gen_44 ()
+{
+#ifdef SIG44
+  kill (getpid (), 44);
+#else
+  handle_44 (0);
+#endif
+}
+
+int
+gen_45 ()
+{
+#ifdef SIG45
+  kill (getpid (), 45);
+#else
+  handle_45 (0);
+#endif
+}
+
+int
+gen_46 ()
+{
+#ifdef SIG46
+  kill (getpid (), 46);
+#else
+  handle_46 (0);
+#endif
+}
+
+int
+gen_47 ()
+{
+#ifdef SIG47
+  kill (getpid (), 47);
+#else
+  handle_47 (0);
+#endif
+}
+
+int
+gen_48 ()
+{
+#ifdef SIG48
+  kill (getpid (), 48);
+#else
+  handle_48 (0);
+#endif
+}
+
+int
+gen_49 ()
+{
+#ifdef SIG49
+  kill (getpid (), 49);
+#else
+  handle_49 (0);
+#endif
+}
+
+int
+gen_50 ()
+{
+#ifdef SIG50
+  kill (getpid (), 50);
+#else
+  handle_50 (0);
+#endif
+}
+
+int
+gen_51 ()
+{
+#ifdef SIG51
+  kill (getpid (), 51);
+#else
+  handle_51 (0);
+#endif
+}
+
+int
+gen_52 ()
+{
+#ifdef SIG52
+  kill (getpid (), 52);
+#else
+  handle_52 (0);
+#endif
+}
+
+int
+gen_53 ()
+{
+#ifdef SIG53
+  kill (getpid (), 53);
+#else
+  handle_53 (0);
+#endif
+}
+
+int
+gen_54 ()
+{
+#ifdef SIG54
+  kill (getpid (), 54);
+#else
+  handle_54 (0);
+#endif
+}
+
+int
+gen_55 ()
+{
+#ifdef SIG55
+  kill (getpid (), 55);
+#else
+  handle_55 (0);
+#endif
+}
+
+int
+gen_56 ()
+{
+#ifdef SIG56
+  kill (getpid (), 56);
+#else
+  handle_56 (0);
+#endif
+}
+
+int
+gen_57 ()
+{
+#ifdef SIG57
+  kill (getpid (), 57);
+#else
+  handle_57 (0);
+#endif
+}
+
+int
+gen_58 ()
+{
+#ifdef SIG58
+  kill (getpid (), 58);
+#else
+  handle_58 (0);
+#endif
+}
+
+int
+gen_59 ()
+{
+#ifdef SIG59
+  kill (getpid (), 59);
+#else
+  handle_59 (0);
+#endif
+}
+
+int
+gen_60 ()
+{
+#ifdef SIG60
+  kill (getpid (), 60);
+#else
+  handle_60 (0);
+#endif
+}
+
+int
+gen_61 ()
+{
+#ifdef SIG61
+  kill (getpid (), 61);
+#else
+  handle_61 (0);
+#endif
+}
+
+int
+gen_62 ()
+{
+#ifdef SIG62
+  kill (getpid (), 62);
+#else
+  handle_62 (0);
+#endif
+}
+
+int
+gen_63 ()
+{
+#ifdef SIG63
+  kill (getpid (), 63);
+#else
+  handle_63 (0);
+#endif
+}
+
+int
+gen_TERM ()
+{
+  kill (getpid (), SIGTERM);
+}  
+
+int
+main ()
+{
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+  signal (SIGABRT, handle_ABRT);
+#ifdef SIGHUP
+  signal (SIGHUP, handle_HUP);
+#endif
+#ifdef SIGQUIT
+  signal (SIGQUIT, handle_QUIT);
+#endif
+#ifdef SIGILL
+  signal (SIGILL, handle_ILL);
+#endif
+#ifdef SIGEMT
+  signal (SIGEMT, handle_EMT);
+#endif
+#ifdef SIGFPE
+  signal (SIGFPE, handle_FPE);
+#endif
+#ifdef SIGBUS
+  signal (SIGBUS, handle_BUS);
+#endif
+#ifdef SIGSEGV
+  signal (SIGSEGV, handle_SEGV);
+#endif
+#ifdef SIGSYS
+  signal (SIGSYS, handle_SYS);
+#endif
+#ifdef SIGPIPE
+  signal (SIGPIPE, handle_PIPE);
+#endif
+#ifdef SIGALRM
+  signal (SIGALRM, handle_ALRM);
+#endif
+#ifdef SIGURG
+  signal (SIGURG, handle_URG);
+#endif
+#ifdef SIGTSTP
+  signal (SIGTSTP, handle_TSTP);
+#endif
+#ifdef SIGCONT
+  signal (SIGCONT, handle_CONT);
+#endif
+#ifdef SIGCHLD
+  signal (SIGCHLD, handle_CHLD);
+#endif
+#ifdef SIGTTIN
+  signal (SIGTTIN, handle_TTIN);
+#endif
+#ifdef SIGTTOU
+  signal (SIGTTOU, handle_TTOU);
+#endif
+#ifdef SIGIO
+  signal (SIGIO, handle_IO);
+#endif
+#ifdef SIGXCPU
+  signal (SIGXCPU, handle_XCPU);
+#endif
+#ifdef SIGXFSZ
+  signal (SIGXFSZ, handle_XFSZ);
+#endif
+#ifdef SIGVTALRM
+  signal (SIGVTALRM, handle_VTALRM);
+#endif
+#ifdef SIGPROF
+  signal (SIGPROF, handle_PROF);
+#endif
+#ifdef SIGWINCH
+  signal (SIGWINCH, handle_WINCH);
+#endif
+#if defined(SIGLOST) && (!defined(SIGABRT) || SIGLOST != SIGABRT)
+  signal (SIGLOST, handle_LOST);
+#endif
+#ifdef SIGUSR1
+  signal (SIGUSR1, handle_USR1);
+#endif
+#ifdef SIGUSR2
+  signal (SIGUSR2, handle_USR2);
+#endif
+#ifdef SIGPWR
+  signal (SIGPWR, handle_PWR);
+#endif
+#if defined (SIGPOLL) && (!defined (SIGIO) || SIGPOLL != SIGIO)
+  signal (SIGPOLL, handle_POLL);
+#endif
+#ifdef SIGWIND
+  signal (SIGWIND, handle_WIND);
+#endif
+#ifdef SIGPHONE
+  signal (SIGPHONE, handle_PHONE);
+#endif
+#ifdef SIGWAITING
+  signal (SIGWAITING, handle_WAITING);
+#endif
+#ifdef SIGLWP
+  signal (SIGLWP, handle_LWP);
+#endif
+#ifdef SIGDANGER
+  signal (SIGDANGER, handle_DANGER);
+#endif
+#ifdef SIGGRANT
+  signal (SIGGRANT, handle_GRANT);
+#endif
+#ifdef SIGRETRACT
+  signal (SIGRETRACT, handle_RETRACT);
+#endif
+#ifdef SIGMSG
+  signal (SIGMSG, handle_MSG);
+#endif
+#ifdef SIGSOUND
+  signal (SIGSOUND, handle_SOUND);
+#endif
+#ifdef SIGSAK
+  signal (SIGSAK, handle_SAK);
+#endif
+#ifdef SIGPRIO
+  signal (SIGPRIO, handle_PRIO);
+#endif
+#ifdef __Lynx__
+  /* Lynx doesn't seem to have anything in signal.h for this.  */
+  signal (33, handle_33);
+  signal (34, handle_34);
+  signal (35, handle_35);
+  signal (36, handle_36);
+  signal (37, handle_37);
+  signal (38, handle_38);
+  signal (39, handle_39);
+  signal (40, handle_40);
+  signal (41, handle_41);
+  signal (42, handle_42);
+  signal (43, handle_43);
+  signal (44, handle_44);
+  signal (45, handle_45);
+  signal (46, handle_46);
+  signal (47, handle_47);
+  signal (48, handle_48);
+  signal (49, handle_49);
+  signal (50, handle_50);
+  signal (51, handle_51);
+  signal (52, handle_52);
+  signal (53, handle_53);
+  signal (54, handle_54);
+  signal (55, handle_55);
+  signal (56, handle_56);
+  signal (57, handle_57);
+  signal (58, handle_58);
+  signal (59, handle_59);
+  signal (60, handle_60);
+  signal (61, handle_61);
+  signal (62, handle_62);
+  signal (63, handle_63);
+#endif /* lynx */
+  signal (SIGTERM, handle_TERM);
+
+  x = 0;
+
+  gen_ABRT ();
+  gen_HUP ();
+  gen_QUIT ();
+  gen_ILL ();
+  gen_EMT ();
+  gen_FPE ();
+  gen_BUS ();
+  gen_SEGV ();
+  gen_SYS ();
+  gen_PIPE ();
+  gen_ALRM ();
+  gen_URG ();
+  gen_TSTP ();
+  gen_CONT ();
+  gen_CHLD ();
+  gen_TTIN ();
+  gen_TTOU ();
+  gen_IO ();
+  gen_XCPU ();
+  gen_XFSZ ();
+  gen_VTALRM ();
+  gen_PROF ();
+  gen_WINCH ();
+  gen_LOST ();
+  gen_USR1 ();
+  gen_USR2 ();
+  gen_PWR ();
+  gen_POLL ();
+  gen_WIND ();
+  gen_PHONE ();
+  gen_WAITING ();
+  gen_LWP ();
+  gen_DANGER ();
+  gen_GRANT ();
+  gen_RETRACT ();
+  gen_MSG ();
+  gen_SOUND ();
+  gen_SAK ();
+  gen_PRIO ();
+  gen_33 ();
+  gen_34 ();
+  gen_35 ();
+  gen_36 ();
+  gen_37 ();
+  gen_38 ();
+  gen_39 ();
+  gen_40 ();
+  gen_41 ();
+  gen_42 ();
+  gen_43 ();
+  gen_44 ();
+  gen_45 ();
+  gen_46 ();
+  gen_47 ();
+  gen_48 ();
+  gen_49 ();
+  gen_50 ();
+  gen_51 ();
+  gen_52 ();
+  gen_53 ();
+  gen_54 ();
+  gen_55 ();
+  gen_56 ();
+  gen_57 ();
+  gen_58 ();
+  gen_59 ();
+  gen_60 ();
+  gen_61 ();
+  gen_62 ();
+  gen_63 ();
+  gen_TERM ();
+
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/sigall.exp b/gdb/testsuite/gdb.base/sigall.exp
new file mode 100644
index 0000000..765e0ee
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sigall.exp
@@ -0,0 +1,210 @@
+#   Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+if [target_info exists gdb,nosignals] {
+    verbose "Skipping sigall.exp because of nosignals."
+    continue
+}
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set testfile sigall
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Make the first signal SIGABRT because it is always supported.
+set sig_supported 1
+set thissig "ABRT"
+
+proc test_one_sig {nextsig} {
+    global sig_supported
+    global gdb_prompt
+    global thissig
+
+    set this_sig_supported $sig_supported
+    gdb_test "handle SIG$thissig stop print" \
+	"SIG$thissig\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes.*"
+    gdb_test "b handle_$thissig" "Breakpoint \[0-9\]+ .*"
+    gdb_test "b gen_$nextsig" "Breakpoint \[0-9\]+ .*"
+
+    set need_another_continue 1
+    set missed_handler 0
+    if $this_sig_supported then {
+	send_gdb "continue\n"
+	if { $thissig == "IO" } {
+	    setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu"
+	}
+	gdb_expect {
+	    -re "Continuing.*Program received signal SIG$thissig.*$gdb_prompt $" {
+		pass "get signal $thissig"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "get signal $thissig"
+		set need_another_continue 0
+	    }
+	    default {
+		fail "get signal $thissig (eof or timeout)"
+	    }
+	}
+    }
+    if [ istarget "alpha-dec-osf3*" ] then {
+	# OSF/1-3.x is unable to continue with a job control stop signal.
+	# The inferior remains stopped without an event of interest
+	# and GDB waits forever for the inferior to stop on an event
+	# of interest. Work around the kernel bug.
+	if { $thissig == "TSTP" || $thissig == "TTIN" || $thissig == "TTOU" } {
+	    setup_xfail "alpha-dec-osf3*"
+	    fail "cannot continue from signal $thissig"
+	    set need_another_continue 0
+	}
+    }
+
+    if $need_another_continue then {
+	send_gdb "continue\n"
+	if { $thissig == "URG" } {
+	    setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu"
+	}
+        # Either Lynx or GDB screws up on SIGPRIO
+	if { $thissig == "PRIO" } {
+	    setup_xfail "*-*-*lynx*"
+	}
+	gdb_expect {
+	    -re "Breakpoint.*handle_$thissig.*$gdb_prompt $" {
+		pass "send signal $thissig"
+	    }
+	    -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" {
+		fail "missed breakpoint at handle_$thissig"
+		set missed_handler 1
+	    }
+	}
+    }
+
+    if { $missed_handler == "0" } then {
+        send_gdb "signal 0\n"
+        gdb_expect {
+	    -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" {
+	        pass "advance to $nextsig"
+	        set sig_supported 1
+	    }
+	    -re "Breakpoint.*gen_$nextsig.*handle.*$gdb_prompt $" {
+	        pass "advance to $nextsig"
+	        set sig_supported 0
+	    }
+	    -re ".*$gdb_prompt $" { fail "advance to $nextsig" }
+	    default { fail "advance to $nextsig (eof or timeout)" }
+        }
+    }
+    set thissig $nextsig
+}
+
+gdb_load $binfile
+
+runto gen_ABRT
+test_one_sig HUP
+test_one_sig QUIT
+test_one_sig ILL
+test_one_sig EMT
+test_one_sig FPE
+test_one_sig BUS
+test_one_sig SEGV
+test_one_sig SYS
+test_one_sig PIPE
+test_one_sig ALRM
+test_one_sig URG
+test_one_sig TSTP
+test_one_sig CONT
+test_one_sig CHLD
+test_one_sig TTIN
+test_one_sig TTOU
+test_one_sig IO
+test_one_sig XCPU
+test_one_sig XFSZ
+test_one_sig VTALRM
+test_one_sig PROF
+test_one_sig WINCH
+test_one_sig LOST
+test_one_sig USR1
+test_one_sig USR2
+test_one_sig PWR
+test_one_sig POLL
+test_one_sig WIND
+test_one_sig PHONE
+test_one_sig WAITING
+test_one_sig LWP
+test_one_sig DANGER
+test_one_sig GRANT
+test_one_sig RETRACT
+test_one_sig MSG
+test_one_sig SOUND
+test_one_sig SAK
+test_one_sig PRIO
+test_one_sig 33
+test_one_sig 34
+test_one_sig 35
+test_one_sig 36
+test_one_sig 37
+test_one_sig 38
+test_one_sig 39
+test_one_sig 40
+test_one_sig 41
+test_one_sig 42
+test_one_sig 43
+test_one_sig 44
+test_one_sig 45
+test_one_sig 46
+test_one_sig 47
+test_one_sig 48
+test_one_sig 49
+test_one_sig 50
+test_one_sig 51
+test_one_sig 52
+test_one_sig 53
+test_one_sig 54
+test_one_sig 55
+test_one_sig 56
+test_one_sig 57
+test_one_sig 58
+test_one_sig 59
+test_one_sig 60
+test_one_sig 61
+test_one_sig 62
+test_one_sig 63
+test_one_sig TERM
+
+# The last signal (SIGTERM) gets handled slightly differently because
+# we are not setting up for another test.
+gdb_test "handle SIGTERM stop print" \
+    "SIGTERM\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes.*"
+gdb_test "b handle_TERM" "Breakpoint \[0-9\]+ .*"
+gdb_test "continue" \
+    "Continuing.*Program received signal SIGTERM.*" \
+    "get signal TERM"
+gdb_test "continue" "Breakpoint.*handle_TERM.*" "send signal TERM"
+gdb_test "continue" "Program exited normally\\." "continue to sigall exit"
+
+return 0
diff --git a/gdb/testsuite/gdb.base/signals.c b/gdb/testsuite/gdb.base/signals.c
new file mode 100644
index 0000000..280e6e7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/signals.c
@@ -0,0 +1,53 @@
+/* Test GDB dealing with stuff like stepping into sigtramp.  */
+
+#include <signal.h>
+
+#ifdef __sh__
+#define signal(a,b)	/* Signals not supported on this target - make them go away */
+#define alarm(a)	/* Ditto for alarm() */
+#endif
+
+static int count = 0;
+
+static void
+handler (sig)
+     int sig;
+{
+  signal (sig, handler);
+  ++count;
+}
+
+static void
+func1 ()
+{
+  ++count;
+}
+
+static void
+func2 ()
+{
+  ++count;
+}
+
+int
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+#ifdef SIGALRM
+  signal (SIGALRM, handler);
+#endif
+#ifdef SIGUSR1
+  signal (SIGUSR1, handler);
+#endif
+  alarm (1);
+  ++count; /* first */
+  alarm (1);
+  ++count; /* second */
+  func1 ();
+  alarm (1);
+  func2 ();
+  return count;
+}
diff --git a/gdb/testsuite/gdb.base/signals.exp b/gdb/testsuite/gdb.base/signals.exp
new file mode 100644
index 0000000..49bf490
--- /dev/null
+++ b/gdb/testsuite/gdb.base/signals.exp
@@ -0,0 +1,628 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if [target_info exists gdb,nosignals] {
+    verbose "Skipping signals.exp because of nosignals."
+    continue
+}
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile signals
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+proc signal_tests_1 {} {
+    global gdb_prompt
+    if [runto_main] then {
+	gdb_test "next" "signal \\(SIGUSR1.*" \
+		"next over signal (SIGALRM, handler)"
+	gdb_test "next" "alarm \\(.*" \
+		"next over signal (SIGUSR1, handler)"
+	gdb_test "next" "\\+\\+count; /\\* first \\*/" \
+		"next over alarm (1)"
+	# An alarm has been signaled, give the signal time to get delivered.
+	sleep 2
+
+	# i386 BSD currently fails the next test with a SIGTRAP.
+	setup_xfail "i*86-*-bsd*"
+	# But Dynix has a DECR_PC_AFTER_BREAK of zero, so the failure
+	# is shadowed by hitting the through_sigtramp_breakpoint.
+	clear_xfail "i*86-sequent-bsd*"
+	# Univel SVR4 i386 continues instead of stepping.
+	setup_xfail "i*86-univel-sysv4*"
+	# lynx fails with "next" acting like "continue"
+	setup_xfail "*-*-*lynx*"
+	# linux (aout versions) also fails with "next" acting like "continue"
+	# this is probably more dependant on the kernel version than on the
+	# object file format or utils.  (sigh)
+	setup_xfail "i*86-pc-linuxaout-gnu" "i*86-pc-linuxoldld-gnu"
+	send_gdb "next\n"
+	gdb_expect {
+	    -re "alarm .*$gdb_prompt $" { pass "next to 2nd alarm (1)" }
+	    -re "Program received signal SIGTRAP.*first.*$gdb_prompt $" {
+
+		# This can happen on machines that have a trace flag
+		# in their PS register.
+		# The trace flag in the PS register will be set due to
+		# the `next' command.
+		# Before calling the signal handler, the PS register
+		# is pushed along with the context on the user stack.
+		# When the signal handler has finished, it reenters the
+		# the kernel via a sigreturn syscall, which restores the
+		# PS register along with the context.
+		# If the kernel erroneously does not clear the trace flag
+		# in the pushed context, gdb will receive a SIGTRAP from
+		# the set trace flag in the restored context after the
+		# signal handler has finished.
+
+		# I do not yet understand why the SIGTRAP does not occur
+		# after stepping the instruction at the restored PC on
+		# i386 BSDI 1.0 systems.
+
+		# Note that the vax under Ultrix also exhibits
+		# this behaviour (it is uncovered by the `continue from
+		# a break in a signal handler' test below).
+		# With this test the failure is shadowed by hitting the
+		# through_sigtramp_breakpoint upon return from the signal
+		# handler.
+
+		# SVR4 and Linux based i*86 systems exhibit this behaviour
+		# as well (it is uncovered by the `continue from a break
+		# in a signal handler' test below).
+		# As these systems use procfs, where we tell the kernel not
+		# to tell gdb about `pass' signals, and the trace flag is
+		# cleared by the kernel before entering the sigtramp
+		# routine, GDB will not notice the execution of the signal 
+		# handler.
+		# Upon return from the signal handler, GDB will receive
+		# a SIGTRAP from the set trace flag in the restored context.
+		# The SIGTRAP marks the end of a (albeit long winded)
+		# single step for GDB, causing this test to pass.
+
+		fail "next to 2nd alarm (1) (probably kernel bug)"
+		gdb_test "next" "alarm.*" "next to 2nd alarm (1)"
+	    }
+	    -re "Program exited with code.*$gdb_prompt $" {
+
+		# This is apparently a bug in the UnixWare kernel (but
+		# has not been investigated beyond the
+		# resume/target_wait level, and has not been reported
+		# to Univel).  If it steps when a signal is pending,
+		# it does a continue instead.  I don't know whether
+		# there is a workaround.
+
+		# Perhaps this problem exists on other SVR4 systems;
+		# but (a) we have no reason to think so, and (b) if we
+		# put a wrong xfail here, we never get an XPASS to let
+		# us know that it was incorrect (and then if such a
+		# configuration regresses we have no way of knowing).
+		# Solaris is not a relevant data point either way
+		# because it lacks single stepping.
+
+		# fnf: I don't agree with the above philosophy.  We
+		# can never be sure that any particular XFAIL is
+		# specified 100% correctly in that no systems with
+		# the bug are missed and all systems without the bug
+		# are excluded.  If we include an XFAIL that isn't
+		# appropriate for a particular system, then when that
+		# system gets tested it will XPASS, and someone should
+		# investigate and fix the setup_xfail as appropriate,
+		# or more preferably, the actual bug.  Each such case
+		# adds more data to narrowing down the scope of the
+		# problem and ultimately fixing it.
+
+		setup_xfail "i*86-*-sysv4*"
+		fail "'next' behaved as 'continue (known SVR4 bug)'"
+		return 0
+	    }
+	    -re ".*$gdb_prompt $" { fail "next to 2nd alarm (1)" }
+	    timeout { fail "next to 2nd alarm (1); (timeout)" }
+	    eof { fail "next to 2nd alarm (1); (eof)" }
+	}
+
+	gdb_test "break handler" "Breakpoint \[0-9\]+ .*"
+	gdb_test "next" "\\+\\+count; /\\* second \\*/" \
+	    "next to 2nd ++count in signals_tests_1"
+	# An alarm has been signaled, give the signal time to get delivered.
+	sleep 2
+
+	set bash_bug 0
+	send_gdb "next\n"
+	gdb_expect {
+	    -re "Breakpoint.*handler.*$gdb_prompt $" {
+		pass "next to handler in signals_tests_1"
+	    }
+	    -re "Program received signal SIGEMT.*$gdb_prompt $" {
+		# Bash versions before 1.13.5 cause this behaviour
+		# by blocking SIGTRAP.
+		fail "next to handler in signals_tests_1 (known problem with bash versions before 1.13.5)"
+		set bash_bug 1
+		gdb_test "signal 0" "Breakpoint.*handler.*"
+	    }
+	    -re ".*$gdb_prompt $" { fail "next to handler in signals_tests_1" }
+	    timeout { fail "next to handler in signals_tests_1 (timeout)" }
+	    eof { fail "next to handler in signals_tests_1 (eof)" }
+	}
+
+	# This doesn't test that main is frame #2, just that main is frame
+	# #2, #3, or higher.  At some point this should be fixed (but
+	# it quite possibly would introduce new FAILs on some systems).
+	setup_xfail "i*86-pc-linux-gnu*" "i*86-*-bsdi2.0"
+	gdb_test "backtrace 10" "#0.*handler.*#1.*#2.*main.*" \
+	    "backtrace in signals_tests_1"
+
+	gdb_test "break func1" "Breakpoint \[0-9\]+ .*"
+	gdb_test "break func2" "Breakpoint \[0-9\]+ .*"
+
+	# Vax Ultrix and i386 BSD currently fail the next test with
+	# a SIGTRAP, but with different symptoms.
+	setup_xfail "vax-*-ultrix*"
+	setup_xfail "i*86-*-bsd*"
+	setup_xfail "i*86-pc-linux-gnu*"
+	setup_xfail "i*86-*-solaris2*"
+	send_gdb "continue\n"
+	gdb_expect {
+	    -re "Breakpoint.*func1.*$gdb_prompt $" { pass "continue to func1" }
+	    -re "Program received signal SIGTRAP.*second.*$gdb_prompt $" {
+
+		# See explanation for `next to 2nd alarm (1)' fail above.
+		# We did step into the signal handler, hit a breakpoint
+		# in the handler and continued from the breakpoint.
+		# The set trace flag in the restored context is causing
+		# the SIGTRAP, without stepping an instruction.
+
+		fail "continue to func1 (probably kernel bug)"
+		gdb_test "continue" "Breakpoint.*func1.*" \
+		    "extra continue to func1"
+	    }
+	    -re "Program received signal SIGTRAP.*func1 ..;.*$gdb_prompt $" {
+
+		# On the vax under Ultrix the set trace flag in the restored
+		# context is causing the SIGTRAP, but after stepping one
+		# instruction, as expected.
+
+		fail "continue to func1 (probably kernel bug)"
+		gdb_test "continue" "Breakpoint.*func1.*" \
+		    "extra continue to func1"
+	    }
+	    -re ".*$gdb_prompt $" { fail "continue to func1" }
+	    default { fail "continue to func1" }
+	}
+
+	setup_xfail "*-*-irix*"
+	send_gdb "signal SIGUSR1\n"
+	gdb_expect {
+	    -re "Breakpoint.*handler.*$gdb_prompt $" { pass "signal SIGUSR1" }
+	    -re "Program received signal SIGUSR1.*$gdb_prompt $" {
+		# This is what irix4 and irix5 do.
+		# It would appear to be a kernel bug.
+		fail "signal SIGUSR1"
+		gdb_test "continue" "Breakpoint.*handler.*" "pass it SIGUSR1"
+	    }
+	    -re ".*$gdb_prompt $" { fail "signal SIGUSR1" }
+	    default { fail "signal SIGUSR1" }
+	}
+
+	# Will tend to wrongly require an extra continue.
+
+	# The problem here is that the breakpoint at func1 will be
+	# inserted, and when the system finishes with the signal
+	# handler it will try to execute there.  For GDB to try to
+	# remember that it was going to step over a breakpoint when a
+	# signal happened, distinguish this case from the case where
+	# func1 is called from the signal handler, etc., seems
+	# exceedingly difficult.  So don't expect this to get fixed
+	# anytime soon.
+
+	setup_xfail "*-*-*"
+	send_gdb "continue\n"
+	gdb_expect {
+	    -re "Breakpoint.*func2.*$gdb_prompt $" { pass "continue to func2" }
+	    -re "Breakpoint.*func1.*$gdb_prompt $" {
+	    	fail "continue to func2"
+		gdb_test "continue" "Breakpoint.*func2.*" \
+		    "extra continue to func2"
+	    }
+	    -re ".*$gdb_prompt $" { fail "continue to func2" }
+	    default { fail "continue to func2" }
+	}
+
+	sleep 2
+
+        # GDB yanks out the breakpoints to step over the breakpoint it
+        # stopped at, which means the breakpoint at handler is yanked.
+	# But if SOFTWARE_SINGLE_STEP_P, we won't get another chance to
+	# reinsert them (at least not with procfs, where we tell the kernel
+	# not to tell gdb about `pass' signals).  So the fix would appear to
+	# be to just yank that one breakpoint when we step over it.
+
+	setup_xfail "sparc*-*-*"
+	setup_xfail "rs6000-*-*"
+	setup_xfail "powerpc-*-*"
+
+	# A faulty bash will not step the inferior into sigtramp on sun3.
+	if {$bash_bug} then {
+	    setup_xfail "m68*-*-sunos4*"
+	}
+
+	setup_xfail "i*86-pc-linux-gnu*"
+	setup_xfail "i*86-*-solaris2*"
+	gdb_test "continue" "Breakpoint.*handler.*" "continue to handler"
+
+	# If the SOFTWARE_SINGLE_STEP_P failure happened, we have already
+	# exited.
+        # If we succeeded a continue will return from the handler to func2.
+	# GDB now has `forgotten' that it intended to step over the
+	# breakpoint at func2 and will stop at func2.
+	setup_xfail "*-*-*"
+	# The sun3 with a faulty bash will also be `forgetful' but it
+	# already got the spurious stop at func2 and this continue will work.
+	if {$bash_bug} then {
+	     clear_xfail "m68*-*-sunos4*"
+	}
+	gdb_test "continue" "Program exited with code 010\\." \
+	    "continue to exit in signals_tests_1 "
+    }
+}
+
+# On a few losing systems, ptrace (PT_CONTINUE) or ptrace (PT_STEP)
+# causes pending signals to be cleared, which causes these tests to
+# get nowhere fast.  This is totally losing behavior (perhaps there
+# are cases in which is it useful but the user needs more control,
+# which they mostly have in GDB), but some people apparently think it
+# is a feature.  It is documented in the ptrace manpage on Motorola
+# Delta Series sysV68 R3V7.1 and on HPUX 9.0.  Even the non-HPUX PA
+# OSes (BSD and OSF/1) seem to have figured they had to copy this
+# braindamage.
+
+if {[ istarget "m68*-motorola-*" ] || [ istarget "hppa*-*-bsd*" ] ||
+    [ istarget "hppa*-*-osf*" ]} then {
+  setup_xfail "*-*-*"
+  fail "ptrace loses on signals on this target"
+  return 0
+}
+
+# lynx2.2.2 doesn't lose signals, instead it screws up the stack pointer
+# in some of these tests leading to massive problems.  I've
+# reported this to lynx, hopefully it'll be fixed in lynx2.3.
+# Severe braindamage.
+if [ istarget "*-*-*lynx*" ] then {
+  setup_xfail "*-*-*"
+  fail "kernel scroggs stack pointer in signal tests on this target"
+  return 0
+}
+
+gdb_exit
+gdb_start
+
+# This will need to be updated as the exact list of signals changes,
+# but I want to test that TARGET_SIGNAL_0, TARGET_SIGNAL_DEFAULT, and
+# TARGET_SIGNAL_UNKNOWN are skipped.
+proc test_handle_all_print {} {
+    global timeout
+    # Increase timeout and expect input buffer for large output from gdb.
+    # Allow blank or TAB as whitespace characters.
+    set oldtimeout $timeout
+    set timeout [expr "$timeout + 360"]
+    verbose "Timeout is now $timeout seconds" 2
+    if { [istarget "*-*-gnu*"] || [istarget "*-*-mach*"] } {
+	gdb_test "handle all print" "Signal\[ 	\]+Stop\[ 	\]+Print\[ 	\]+Pass to program\[ 	\]+Description\r\nSIGHUP\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Hangup.*SIG63\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Real-time event 63.*EXC_BREAKPOINT\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Breakpoint"
+    } else {
+	gdb_test "handle all print" "Signal\[ 	\]+Stop\[ 	\]+Print\[ 	\]+Pass to program\[ 	\]+Description\r\nSIGHUP\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Hangup.*SIG63\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Yes\[ 	\]+Real-time event 63"
+    }
+    set timeout $oldtimeout
+    verbose "Timeout restored to $timeout seconds" 2
+}
+test_handle_all_print
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+signal_tests_1
+
+# Force a resync, so we're looking at the right prompt.  On SCO we
+# were getting out of sync (I don't understand why).
+send_gdb "p 1+1\n"
+gdb_expect {
+    -re "= 2.*$gdb_prompt $" {}
+    -re ".*$gdb_prompt $" { perror "sync trouble in signals.exp" }
+    default { perror "sync trouble in signals.exp" }
+}
+
+if [runto_main] then {
+    gdb_test "break handler if 0" "Breakpoint \[0-9\]+ .*"
+    gdb_test "set \$handler_breakpoint_number = \$bpnum" ""
+
+    # Get to the point where a signal is waiting to be delivered
+    gdb_test "next" "signal \\(SIGUSR1.*" "next to signal in signals.exp"
+    gdb_test "next" "alarm \\(.*" "next to alarm #1 in signals.exp"
+    gdb_test "next" "\\+\\+count; /\\* first \\*/" \
+	"next to ++count #1 in signals.exp"
+    # Give the signal time to get delivered
+    sleep 2
+
+    # Now call a function.  When GDB tries to run the stack dummy,
+    # it will hit the breakpoint at handler.  Provided it doesn't
+    # lose its cool, this is not a problem, it just has to note
+    # that the breakpoint condition is false and keep going.
+
+    gdb_test "p func1 ()" "^p func1 \\(\\)\r\n.\[0-9\]* = void" \
+	"p func1 () #1 in signals.exp"
+
+    # Make sure the count got incremented.
+
+    # Haven't investigated this xfail
+    setup_xfail "rs6000-*-*"
+    setup_xfail "powerpc-*-*"
+    gdb_test "p count" "= 2" "p count #1 in signals.exp"
+    if { [istarget "rs6000-*-*"] || [istarget "powerpc-*-*"] } { return 0 }
+
+    gdb_test "condition \$handler_breakpoint_number" "now unconditional\\."
+    gdb_test "next" "alarm \\(.*" "next to alarm #2 in signals.exp"
+    gdb_test "next" "\\+\\+count; /\\* second \\*/" \
+	"next to ++count #2 in signals.exp"
+    sleep 2
+
+    # This time we stop when GDB tries to run the stack dummy.
+    # So it is OK that we do not print the return value from the function.
+    gdb_test "p func1 ()" \
+"Breakpoint \[0-9\]*, handler.*
+The program being debugged stopped while in a function called from GDB.*" \
+	"p func1 () #2 in signals.exp"
+    # But we should be able to backtrace...
+    # On alpha-*-osf2.0 this test works when run manually but sometime fails when
+    # run under dejagnu, making it very hard to debug the problem.  Weird...
+    gdb_test "bt 10" "#0.*handler.*#1.*#2.*main.*" "bt in signals.exp"
+    # ...and continue...
+    gdb_test "continue" "Continuing\\." "continue in signals.exp"
+    # ...and then count should have been incremented
+    gdb_test "p count" "= 5" "p count #2 in signals.exp"
+
+
+# Verify that "info signals" produces reasonable output.
+#
+    send_gdb "info signals\n"
+    gdb_expect {
+      -re "SIGHUP.*SIGINT.*SIGQUIT.*SIGILL.*SIGTRAP.*SIGABRT.*SIGEMT.*SIGFPE.*SIGKILL.*SIGBUS.*SIGSEGV.*SIGSYS.*SIGPIPE.*SIGALRM.*SIGTERM.*SIGURG.*SIGSTOP.*SIGTSTP.*SIGCONT.*SIGCHLD.*SIGTTIN.*SIGTTOU.*SIGIO.*SIGXCPU.*SIGXFSZ.*SIGVTALRM.*SIGPROF.*SIGWINCH.*SIGLOST.*SIGUSR1.*SIGUSR2.*SIGPWR.*SIGPOLL.*SIGWIND.*SIGPHONE.*SIGWAITING.*SIGLWP.*SIGDANGER.*SIGGRANT.*SIGRETRACT.*SIGMSG.*SIGSOUND.*SIGSAK.*SIGPRIO.*SIG33.*SIG34.*SIG35.*SIG36.*SIG37.*SIG38.*SIG39.*SIG40.*SIG41.*SIG42.*SIG43.*SIG44.*SIG45.*SIG46.*SIG47.*SIG48.*SIG49.*SIG50.*SIG51.*SIG52.*SIG53.*SIG54.*SIG55.*SIG56.*SIG57.*SIG58.*SIG59.*SIG60.*SIG61.*SIG62.*SIG63.*Use the \"handle\" command to change these tables.*$gdb_prompt $"\
+              {pass "info signals"}
+      -re "$gdb_prompt $"\
+              {fail "info signals"}
+      timeout {fail "(timeout) info signals"}
+    }
+
+# Verify that "info signal" correctly handles an argument, be it a
+# symbolic signal name, or an integer ID.
+#
+    send_gdb "info signal SIGTRAP\n"
+    gdb_expect {
+      -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
+              {pass "info signal SIGTRAP"}
+      -re "$gdb_prompt $"\
+              {fail "info signal SIGTRAP"}
+      timeout {fail "(timeout) info signal SIGTRAP"}
+    }
+
+    send_gdb "info signal 5\n"
+    gdb_expect {
+      -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
+              {pass "info signal 5"}
+      -re "$gdb_prompt $"\
+              {fail "info signal 5"}
+      timeout {fail "(timeout) info signal 5"}
+    }
+
+# Verify that "handle" with illegal arguments is gracefully, um, handled.
+#
+    send_gdb "handle\n"
+    gdb_expect {
+      -re "Argument required .signal to handle.*$gdb_prompt $"\
+              {pass "handle without arguments"}
+      -re "$gdb_prompt $"\
+              {fail "handle without arguments"}
+      timeout {fail "(timeout) handle without arguments"}
+    }
+
+    send_gdb "handle SIGFOO\n"
+    gdb_expect {
+      -re "Unrecognized or ambiguous flag word: \"SIGFOO\".*$gdb_prompt $"\
+              {pass "handle with bogus SIG"}
+      -re "$gdb_prompt $"\
+              {fail "handle with bogus SIG"}
+      timeout {fail "(timeout) handle with bogus SIG"}
+    }
+
+    send_gdb "handle SIGHUP frump\n"
+    gdb_expect {
+      -re "Unrecognized or ambiguous flag word: \"frump\".*$gdb_prompt $"\
+              {pass "handle SIG with bogus action"}
+      -re "$gdb_prompt $"\
+              {fail "handle SIG with bogus action"}
+      timeout {fail "(timeout) handle SIG with bogus action"}
+    }
+
+# Verify that "handle" can take multiple actions per SIG, and that in
+# the case of conflicting actions, that the rightmost action "wins".
+#
+    send_gdb "handle SIGHUP print noprint\n"
+    gdb_expect {
+      -re ".*SIGHUP\[ \t\]*No\[ \t\]*No\[ \t\]*Yes\[ \t\]*Hangup.*$gdb_prompt $"\
+              {pass "handle SIG with multiple conflicting actions"}
+      -re "$gdb_prompt $"\
+              {fail "handle SIG with multiple conflicting actions"}
+      timeout {fail "(timeout) handle SIG with multiple conflicting actions"}
+    }
+
+# Exercise all the various actions.  (We don't care what the outcome
+# is, this is just to ensure that they all can be parsed.)
+#
+    send_gdb "handle SIGHUP print noprint stop nostop ignore noignore pass nopass\n"
+    gdb_expect {
+      -re ".*Signal.*$gdb_prompt $"\
+              {pass "handle SIG parses all legal actions"}
+      -re "$gdb_prompt $"\
+              {fail "handle SIG parses all legal actions"}
+      timeout {fail "(timeout) handle SIG parses all legal actions"}
+    }
+
+# Verify that we can "handle" multiple signals at once, interspersed
+# with actions.
+#
+    send_gdb "handle SIG63 print SIGILL\n"
+    gdb_expect {
+      -re ".*SIGILL\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Illegal instruction.*SIG63\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Real-time event 63.*$gdb_prompt $"\
+              {pass "handle multiple SIGs"}
+      -re "$gdb_prompt $"\
+              {fail "handle multiple SIGs"}
+      timeout {fail "(timeout) handle multiple SIGs"}
+    }
+
+# Verify that "handle" can take a numeric argument for the signal ID,
+# rather than a symbolic name.  (This may not be portable; works for
+# HP-UX.)
+#
+# Also note that this testpoint overrides SIGTRAP, which on HP-UX at
+# least, is used to implement single-steps and breakpoints.  Don't
+# expect to run the inferior after this!
+#
+    send_gdb "handle 5 nopass\n"
+    gdb_expect {
+      -re ".*SIGTRAP is used by the debugger.*Are you sure you want to change it.*y or n.*"\
+              {send_gdb "y\n"
+               gdb_expect {
+                 -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
+                         {pass "override SIGTRAP (#5)"}
+                 -re "$gdb_prompt $"\
+                         {fail "override SIGTRAP (#5)"}
+                 timeout {fail "(timeout) override SIGTRAP (#5)"}
+               }
+              }
+      -re "$gdb_prompt $"\
+              {fail "override SIGTRAP (#5)"}
+      timeout {fail "(timeout) override SIGTRAP (#5)"}
+    }
+
+# GDB doesn't seem to allow numeric signal IDs larger than 15.  Verify
+# that restriction.  ??rehrauer: Not sure if this is a feature or a
+# bug, actually.  Why is the range 1-15?
+#
+    send_gdb "handle 58\n"
+    gdb_expect {
+      -re "Only signals 1-15 are valid as numeric signals.*Use \"info signals\" for a list of symbolic signals.*$gdb_prompt $"\
+              {pass "invalid signal number rejected"}
+      -re "$gdb_prompt $"\
+              {fail "invalid signal number rejected"}
+      timeout {fail "(timeout) invalid signal number rejected"}
+    }
+
+# Verify that we can accept a signal ID range (number-number).
+# ??rehrauer: This feature isn't documented on the quick-reference
+# card.
+#
+    send_gdb "handle 13-15\n"
+    gdb_expect {
+      -re ".*SIGPIPE.*SIGALRM.*SIGTERM.*$gdb_prompt $"\
+              {pass "handle multiple SIGs via integer range"}
+      -re "$gdb_prompt $"\
+              {fail "handle multiple SIGs via integer range"}
+      timeout {fail "(timeout) handle multiple SIGs via integer range"}
+
+    }
+
+# Bizarrely enough, GDB also allows you to reverse the range
+# stat, stop IDs.  E.g., "3-1" and "1-3" mean the same thing.
+# Probably this isn't documented, but the code anticipates it,
+# so we'd best test it...
+#
+    send_gdb "handle 15-13\n"
+    gdb_expect {
+      -re ".*SIGPIPE.*SIGALRM.*SIGTERM.*$gdb_prompt $"\
+              {pass "handle multiple SIGs via integer range"}
+      -re "$gdb_prompt $"\
+              {fail "handle multiple SIGs via integer range"}
+      timeout {fail "(timeout) handle multiple SIGs via integer range"}
+
+    }
+
+# SIGINT is used by the debugger as well.  Verify that we can change
+# our minds about changing it.
+#
+    send_gdb "handle SIGINT nopass\n"
+    gdb_expect {
+      -re ".*SIGINT is used by the debugger.*Are you sure you want to change it.*y or n.*"\
+              {send_gdb "n\n"
+# ??rehrauer: When you answer "n", the header for the signal info is
+# printed, but not the actual handler settings.  Probably a bug.
+#
+               gdb_expect {
+                 -re "Not confirmed, unchanged.*Signal.*$gdb_prompt $"\
+                         {pass "override SIGINT"}
+                 -re "$gdb_prompt $"\
+                         {fail "override SIGINT"}
+                 timeout {fail "(timeout) override SIGINT"}
+               }
+              }
+      -re "$gdb_prompt $"\
+              {fail "override SIGINT"}
+      timeout {fail "(timeout) override SIGINT"}
+    }
+
+# Verify that GDB responds gracefully to the "signal" command with
+# a missing argument.
+#
+    send_gdb "signal\n"
+    gdb_expect {
+      -re "Argument required .signal number..*$gdb_prompt $"\
+              {pass "signal without arguments disallowed"}
+      -re "$gdb_prompt $"\
+              {fail "signal without arguments disallowed"}
+      timeout {fail "(timeout) signal without arguments disallowed"}
+    }
+
+# Verify that we can successfully send a signal other than 0 to
+# the inferior.  (This probably causes the inferior to run away.
+# Be prepared to rerun to main for further testing.)
+#
+    send_gdb "signal 5\n"
+    gdb_expect {
+      -re "Continuing with signal SIGTRAP.*$gdb_prompt $"\
+              {pass "sent signal 5"}
+      -re "$gdb_prompt $"\
+              {fail "sent signal 5"}
+      timeout {fail "(timeout) sent signal 5"}
+    }
+
+}
+
+return 0
diff --git a/gdb/testsuite/gdb.base/smoke.c b/gdb/testsuite/gdb.base/smoke.c
new file mode 100644
index 0000000..69d34c9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/smoke.c
@@ -0,0 +1,40 @@
+/* Test various kinds of stepping.
+*/
+int glob = 0;
+
+int callee() {
+    glob++;
+    return (0);
+}
+
+int main () {
+   int w,x,y,z;
+   int a[10], b[10];
+
+   /* Test "next" and "step" */
+   w = 0;
+   x = 1;
+   y = 2;
+   z = 3;
+   w = w + 2;
+   x = x + 3;
+   y = y + 4;
+   z = z + 5;
+
+   /* Test that "next" goes over a call */
+   callee(); /* OVER */
+
+   /* Test that "step" doesn't */
+   callee(); /* INTO */
+
+   /* Test "stepi" */
+   a[5] = a[3] - a[4];
+   callee(); /* STEPI */
+   
+   /* Test "nexti" */
+   callee(); /* NEXTI */
+
+   y = w + z;
+
+   return (0);
+}
diff --git a/gdb/testsuite/gdb.base/smoke.cc b/gdb/testsuite/gdb.base/smoke.cc
new file mode 100644
index 0000000..931fdaf
--- /dev/null
+++ b/gdb/testsuite/gdb.base/smoke.cc
@@ -0,0 +1,480 @@
+// Test various -*- C++ -*- things.
+
+typedef struct fleep fleep;
+struct fleep { int a; } s;
+
+// ====================== simple class structures  =======================
+
+struct default_public_struct {
+ // defaults to public:
+  int a;
+  int b;
+};
+
+struct explicit_public_struct {
+ public:
+  int a;
+  int b;
+};
+
+struct protected_struct {
+ protected:
+  int a;
+  int b;
+};
+
+struct private_struct {
+ private:
+  int a;
+  int b;
+};
+
+struct mixed_protection_struct {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+class public_class {
+ public:
+  int a;
+  int b;
+};
+
+class protected_class {
+ protected:
+  int a;
+  int b;
+};
+
+class default_private_class {
+ // defaults to private:
+  int a;
+  int b;
+};
+
+class explicit_private_class {
+ private:
+  int a;
+  int b;
+};
+
+class mixed_protection_class {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+// ========================= simple inheritance ==========================
+
+class A {
+ public:
+  int a;
+  int x;
+};
+
+A g_A;
+
+class B : public A {
+ public:
+  int b;
+  int x;
+};
+
+B g_B;
+
+class C : public A {
+ public:
+  int c;
+  int x;
+};
+
+C g_C;
+
+class D : public B, public C {
+ public:
+  int d;
+  int x;
+};
+
+D g_D;
+
+class E : public D {
+ public:
+  int e;
+  int x;
+};
+
+E g_E;
+
+class class_with_anon_union
+{
+ public:
+  int one;
+  union
+  {
+    int a;
+    long b;
+  };
+};
+
+class_with_anon_union g_anon_union;
+
+void inheritance2 (void)
+{
+}
+
+void inheritance1 (void)
+{
+  int ival;
+  int *intp;
+
+  // {A::a, A::x}
+
+  g_A.A::a = 1;
+  g_A.A::x = 2;
+
+  // {{A::a,A::x},B::b,B::x}
+
+  g_B.A::a = 3;
+  g_B.A::x = 4;
+  g_B.B::b = 5;
+  g_B.B::x = 6;
+
+  // {{A::a,A::x},C::c,C::x}
+
+  g_C.A::a = 7;
+  g_C.A::x = 8;
+  g_C.C::c = 9;
+  g_C.C::x = 10;
+
+  // {{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_D, ival = 11;
+       intp < ((int *) &g_D + sizeof (g_D) / sizeof (int));
+       intp++, ival++)
+    {
+      *intp = ival;
+    }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 11;  (g_D.A::a = 11; is ambiguous)
+  // ????? = 12;  (g_D.A::x = 12; is ambiguous)
+  g_D.B::b = 13;
+  g_D.B::x = 14;
+  // ????? = 15;
+  // ????? = 16;
+  g_D.C::c = 17;
+  g_D.C::x = 18;
+  g_D.D::d = 19;
+  g_D.D::x = 20;
+
+
+  // {{{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}},E::e,E::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_E, ival = 21;
+       intp < ((int *) &g_E + sizeof (g_E) / sizeof (int));
+       intp++, ival++)
+  {
+    *intp = ival;
+  }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 21;  (g_E.A::a = 21; is ambiguous)
+  // ????? = 22;  (g_E.A::x = 22; is ambiguous)
+  g_E.B::b = 23;
+  g_E.B::x = 24;
+  // ????? = 25;
+  // ????? = 26;
+  g_E.C::c = 27;
+  g_E.C::x = 28;
+  g_E.D::d = 29;
+  g_E.D::x = 30;
+  g_E.E::e = 31;
+  g_E.E::x = 32;
+
+  g_anon_union.one = 1;
+  g_anon_union.a = 2;
+
+  inheritance2 ();	
+}
+
+// ======================== virtual base classes=========================
+
+class vA {
+ public:
+  int va;
+  int vx;
+};
+
+vA g_vA;
+
+class vB : public virtual vA {
+ public:
+  int vb;
+  int vx;
+};
+
+vB g_vB;
+
+class vC : public virtual vA {
+ public:
+  int vc;
+  int vx;
+};
+
+vC g_vC;
+
+class vD : public virtual vB, public virtual vC {
+ public:
+  int vd;
+  int vx;
+};
+
+vD g_vD;
+
+class vE : public virtual vD {
+ public:
+  int ve;
+  int vx;
+};
+
+vE g_vE;
+
+void inheritance4 (void)
+{
+}
+
+void inheritance3 (void)
+{
+  int ival;
+  int *intp;
+
+  // {vA::va, vA::vx}
+
+  g_vA.vA::va = 1;
+  g_vA.vA::vx = 2;
+
+  // {{vA::va, vA::vx}, vB::vb, vB::vx}
+
+  g_vB.vA::va = 3;
+  g_vB.vA::vx = 4;
+  g_vB.vB::vb = 5;
+  g_vB.vB::vx = 6;
+
+  // {{vA::va, vA::vx}, vC::vc, vC::vx}
+
+  g_vC.vA::va = 7;
+  g_vC.vA::vx = 8;
+  g_vC.vC::vc = 9;
+  g_vC.vC::vx = 10;
+
+  // {{{{vA::va, vA::vx}, vB::vb, vB::vx}, vC::vc, vC::vx}, vD::vd,vD::vx}
+
+  g_vD.vA::va = 11;
+  g_vD.vA::vx = 12;
+  g_vD.vB::vb = 13;
+  g_vD.vB::vx = 14;
+  g_vD.vC::vc = 15;
+  g_vD.vC::vx = 16;
+  g_vD.vD::vd = 17;
+  g_vD.vD::vx = 18;
+
+
+  // {{{{{vA::va,vA::vx},vB::vb,vB::vx},vC::vc,vC::vx},vD::vd,vD::vx},vE::ve,vE::vx}
+
+  g_vD.vA::va = 19;
+  g_vD.vA::vx = 20;
+  g_vD.vB::vb = 21;
+  g_vD.vB::vx = 22;
+  g_vD.vC::vc = 23;
+  g_vD.vC::vx = 24;
+  g_vD.vD::vd = 25;
+  g_vD.vD::vx = 26;
+  g_vE.vE::ve = 27;
+  g_vE.vE::vx = 28;
+
+  inheritance4 ();	
+}
+
+// ======================================================================
+
+class Base1 {
+ public:
+  int x;
+  Base1(int i) { x = i; }
+};
+
+class Foo
+{
+ public:
+  int x;
+  int y;
+  static int st;
+  Foo (int i, int j) { x = i; y = j; }
+  int operator! ();
+  operator int ();
+  int times (int y);
+};
+
+class Bar : public Base1, public Foo {
+ public:
+  int z;
+  Bar (int i, int j, int k) : Base1 (10*k), Foo (i, j) { z = k; }
+};
+
+int Foo::operator! () { return !x; }
+
+int Foo::times (int y) { return x * y; }
+
+int Foo::st = 100;
+
+Foo::operator int() { return x; }
+
+Foo foo(10, 11);
+Bar bar(20, 21, 22);
+
+class Contains_static_instance
+{
+ public:
+  int x;
+  int y;
+  Contains_static_instance (int i, int j) { x = i; y = j; }
+  static Contains_static_instance null;
+};
+
+Contains_static_instance Contains_static_instance::null(0,0);
+Contains_static_instance csi(10,20);
+
+class Contains_nested_static_instance
+{
+ public:
+  class Nested
+  {
+   public:
+    Nested(int i) : z(i) {}
+    int z;
+    static Contains_nested_static_instance xx;
+  };
+
+  Contains_nested_static_instance(int i, int j) : x(i), y(j) {}
+
+  int x;
+  int y;
+
+  static Contains_nested_static_instance null;
+  static Nested yy;
+};
+
+Contains_nested_static_instance Contains_nested_static_instance::null(0, 0);
+Contains_nested_static_instance::Nested Contains_nested_static_instance::yy(5);
+Contains_nested_static_instance
+  Contains_nested_static_instance::Nested::xx(1,2);
+Contains_nested_static_instance cnsi(30,40);
+
+typedef struct {
+  int one;
+  int two;
+} tagless_struct;
+tagless_struct v_tagless;
+
+/* Try to get the compiler to allocate a class in a register.  */
+class small {
+ public:
+  int x;
+  int method ();
+};
+int small::method ()
+{
+  return x + 5;
+}
+void marker_reg1 () {}
+
+int
+register_class ()
+{
+  /* We don't call any methods for v, so gcc version cygnus-2.3.3-930220
+     might put this variable in a register.  This is a lose, though, because
+     it means that GDB can't call any methods for that variable.  */
+  register small v;
+
+  int i;
+
+  /* Perform a computation sufficiently complicated that optimizing compilers
+     won't optimized out the variable.  If some compiler constant-folds this
+     whole loop, maybe using a parameter to this function here would help.  */
+  v.x = 0;
+  for (i = 0; i < 13; ++i)
+    v.x += i;
+  --v.x; /* v.x is now 77 */
+  marker_reg1 ();
+  return v.x + 5;
+}
+
+int
+main()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  inheritance1 ();
+  inheritance3 ();
+  register_class ();
+
+  /* FIXME: pmi gets optimized out.  Need to do some more computation with
+     it or something.  (No one notices, because the test is xfail'd anyway,
+     but that probably won't always be true...).  */
+  int Foo::* pmi = &Foo::y;
+
+  /* Make sure the AIX linker doesn't remove the variable.  */
+  v_tagless.one = 5;
+
+  return foo.*pmi;
+}
+
+/* Create an instance for some classes, otherwise they get optimized away.  */
+default_public_struct default_public_s;
+explicit_public_struct explicit_public_s;
+protected_struct protected_s;
+private_struct private_s;
+mixed_protection_struct mixed_protection_s;
+public_class public_c;
+protected_class protected_c;
+default_private_class default_private_c;
+explicit_private_class explicit_private_c;
+mixed_protection_class mixed_protection_c;
diff --git a/gdb/testsuite/gdb.base/smoke.exp b/gdb/testsuite/gdb.base/smoke.exp
new file mode 100644
index 0000000..42de7c8
--- /dev/null
+++ b/gdb/testsuite/gdb.base/smoke.exp
@@ -0,0 +1,181 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# smoke.exp -- Expect script to test gdb before checkins
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set testfile smoke
+set testfile1 smoke1
+set c_srcfile   ${srcdir}/${subdir}/${testfile}.c
+set cpp_srcfile ${srcdir}/${subdir}/${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+set binfile1 ${objdir}/${subdir}/${testfile1}
+
+#remote_exec build "rm -f ${binfile}"
+remote_exec build "rm -f core"
+
+# "C" section, using source copied from "step-test.c" from "gdb.base"
+#
+if { [gdb_compile "${c_srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# Some basic tests
+#
+gdb_test "tb main"   ".*Breakpoint 1 at.*line 15.*" "temp breakpoint"
+gdb_test "b callee"  ".*Breakpoint 2 at.*line 6.*"  "breakpoint"
+gdb_test "l 10"      ".*10.*int main.*11.*int w,x,y,z;.*12.*int a.*" "list"
+gdb_test "c" ".*The program is not being run.*" "catch error"
+gdb_test "r" ".*Starting program.*main.*15.*"   "hit bp"
+gdb_test "hel r" ".*Start debugged program.*without arguments.*" "help"
+gdb_test "n" ".*x = 1;.*" "next"
+gdb_test "s" ".*y = 2;.*" "step"
+gdb_test "p/t y" ".* = 1.*" "print y in binary"
+gdb_test "p 1+2*3+4" ".* = 11.*" "calculate"
+gdb_test "p/t 1+2*3+4" ".* = 1011.*" "binary"
+
+# Note: accept either "Watchpoint" or "Hardware watchpoint";
+#       10.20 can't do the hardware watch.  The hardware kind
+#       triggers one line earlier than the regular kind.
+#
+gdb_test "wat y" ".*atchpoint.*y.*" "set watch"
+gdb_test "c" ".*atchpoint.*Old.*= .*New.*= 2.*1\[78\].*" "continue, hit watch"
+
+gdb_test "set glob=999" ".*.*" "set"
+gdb_test "p glob"   ".*= 999.*.*" "print glob"
+gdb_test "p/x glob" ".*= 0x3e7.*" "hex"
+gdb_test "c" ".*atchpoint.*Old.*= 2.*New.*= 6.*2\[12\].*" "continue, 2nd hit watch"
+gdb_test "d 5" "No breakpoint number 5." "del non existing watch"
+gdb_test "c" ".*Breakpoint.*callee.*6.*" "hit bp"
+gdb_test "bt" ".*callee.*6.*main.*25.*" "bt"
+gdb_test "fin" ".*Run till exit.*callee.*Value returned.*0.*" "finish"
+gdb_test "c"  ".*Breakpoint.*callee.*6.*" "hit bp again"
+gdb_test "cle" ".*Deleted breakpoint.*" "clear"
+gdb_test "wat glob" ".*atchpoint.*glob.*" "set 2nd watch"
+gdb_test "i wat" ".*" ""
+gdb_test "whe" ".*" ""
+
+# ??rehrauer: We're now disabling watchpoints while an interactive
+# call is "in flight".  When/if we can teach gdb how to unwind through
+# the call dummy frame, we can then allow watches during calls, and
+# also then restore this testpoint to the original, commented-out form.
+#
+gdb_test "call callee()" ".*\[0-9\]* = 0.*" "call, didn't hit watch"
+#gdb_test "call callee()" ".*atchpoint.*Old.*= 1000.*New.*= 1001.*\[67\].*being debug.*is done.*" "call, hit watch"
+
+gdb_test "d 4" ".*" "del watch 2"
+gdb_test "d 3" ".*" "del watch 1"
+gdb_test "info break" "No breakpoints or watchpoints."
+# since we have deleted all the watchpoints this test is useless
+#gdb_test "c" ".*Continuing.*" "end call"
+gdb_test "c" ".*Program exited normally.*" "pgm exit"
+
+# Check for production of a core file
+#
+#set exec_output [execute_anywhere "ls core"]
+set exec_output [remote_exec build "ls core"]
+
+if [ regexp "core not found" $exec_output]  {
+    pass "No core dumped on quit"
+} else {
+  if [ regexp "No such file or directory" $exec_output] {
+      pass "ls: core: No core dumped on quit"
+  } else {
+      remote_exec build "rm -f core"
+      fail "Core dumped on quit"
+  }
+}
+
+
+#========================================
+#
+# "C++" section, using source copied from "misc.cc" from "gdb.c++"
+#
+
+#
+#remote_exec build "rm -f ${binfile}"
+#remote_exec build "CC -g -o ${binfile} ${cpp_srcfile}"
+if {[gdb_compile "${cpp_srcfile}" "${binfile1}" executable {c++ debug}] != ""} {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile1}
+
+# Tests, some copied from misc.exp.
+#
+
+    # See what language gdb thinks main() is, prior to reading full symbols.
+    # I think this fails for COFF targets.
+    setup_xfail "a29k-*-udi"
+    send_gdb "show language\n"
+    gdb_expect {
+        -re ".* source language is \"auto; currently c\\+\\+\".*$gdb_prompt $" {
+            pass "deduced language is C++, before full symbols"
+        }
+        -re ".*$gdb_prompt $" {    fail "source language not correct for C++ (psymtabs only)"}
+            return
+        
+        timeout { fail "can't show language (timeout)"}
+            return
+    }
+
+gdb_test "b main" ".*Breakpoint 1 at.*" ""
+gdb_test "r" ".*Starting program.*Breakpoint 1.*" "run to main"
+gdb_test "ptype Foo" ".*type = class Foo.*static int st;.*int operator.*" "ptype"
+gdb_test "step" ".*inheritance1.*" "step"
+gdb_test "ptype g_anon_union" ".*anon_union.*union.*int a;.*" "anon"
+gdb_test "p g_E" ".*class D.*class B.*class A.*class C.*class A.*x = 0.*" "print inherited class "
+gdb_test "p g_E.x = 99" ".*warn.*x ambiguous; using E::x. Use a cast to disambig.*99.*" "set via print"
+gdb_test "c" ".*Program exited.*" "run to end"
+
+gdb_exit
+
+# Check for production of a core file
+#
+#set exec_output [execute_anywhere "ls core"]
+set exec_output [remote_exec build "ls core"]
+if [ regexp "core not found" $exec_output]  {
+    pass "No core dumped on quit"
+} else {
+  if [ regexp "No such file or directory" $exec_output] {
+      pass "ls: core: No core dumped on quit"
+  } else {
+      remote_exec build "rm -f core"
+      fail "Core dumped on quit"
+  }
+}
+
+# execute_anywhere "rm -f ${binfile1}"
+#
+return 0
diff --git a/gdb/testsuite/gdb.base/so-impl-ld.c b/gdb/testsuite/gdb.base/so-impl-ld.c
new file mode 100644
index 0000000..a8fa189
--- /dev/null
+++ b/gdb/testsuite/gdb.base/so-impl-ld.c
@@ -0,0 +1,18 @@
+/* This program is linked against SOM shared libraries, which the loader
+   automatically loads along with the program itself).
+   */
+
+#include <stdio.h>
+
+extern int solib_main (int);
+
+main ()
+{
+  int  result;
+
+  /* Call a shlib function. */
+  result = solib_main (100);
+
+  /* Call it again. */
+  result = solib_main (result);
+}
diff --git a/gdb/testsuite/gdb.base/so-impl-ld.exp b/gdb/testsuite/gdb.base/so-impl-ld.exp
new file mode 100644
index 0000000..a52aa1f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/so-impl-ld.exp
@@ -0,0 +1,167 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+# This test is presently only valid on HP-UX, since it requires
+# that we use HP-UX-specific compiler & linker options to build
+# the testcase.
+#
+setup_xfail "*-*-*"
+clear_xfail "hppa*-*-*hpux*"
+
+set libfile "solib"
+set testfile "so-impl-ld"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# Build the shared libraries this test case needs.
+#
+#cd ${subdir}
+#remote_exec build "$CC -g +z -c ${libfile}1.c -o ${libfile}1.o"
+
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=+z"
+    } else {
+	# don't know that the compiler is, hope for the best...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags "additional_flags=-fpic"
+}
+
+if {[gdb_compile "${srcdir}/${subdir}/${libfile}1.c" "${libfile}1.o" object [list debug $additional_flags]] != ""} {
+    perror "Couldn't compile ${libfile}1.c"
+    return -1
+}
+
+if [istarget "hppa*-hp-hpux*"] then {
+    remote_exec build "ld -b ${libfile}1.o -o ${libfile}1.sl"
+} else {
+    set additional_flags "additional_flags=-shared"
+    gdb_compile "${libfile}1.o" "${libfile}1.sl" executable [list debug $additional_flags]
+}
+
+# Build the test case
+#remote_exec build "$CC -Aa -g ${srcfile} ${libfile}1.sl -o ${binfile}"
+
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=-Ae"
+    } else {
+	# don't know what the compiler is, hope for the best, maybe it's ANSI...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags ""
+}
+
+if {[gdb_compile "${srcdir}/${subdir}/${srcfile} ${libfile}1.sl" "${binfile}" executable [list debug $additional_flags]] != ""} {
+    perror "Couldn't build ${binfile}"
+    return -1
+}
+#cd ..
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This program implicitly loads SOM shared libraries.
+#
+if ![runto_main] then { fail "implicit solibs tests suppressed" }
+
+# Verify that we can step over the first shlib call.
+#
+send_gdb "next\n"
+gdb_expect {
+  -re "17\[ \t\]*result = solib_main .result.*$gdb_prompt $"\
+          {pass "step over solib call"}
+  -re "$gdb_prompt $"\
+          {fail "step over solib call"}
+  timeout {fail "(timeout) step over solib call"}
+}
+
+# Verify that we can step into the second shlib call.
+#
+send_gdb "step\n"
+gdb_expect {
+  -re "solib_main .arg=10000. at.*${libfile}1.c:8.*$gdb_prompt $"\
+          {pass "step into solib call"}
+  -re "$gdb_prompt $"\
+          {fail "step into solib call"}
+  timeout {fail "(timeout) step into solib call"}
+}
+
+# Verify that we can step within the shlib call.
+#
+send_gdb "next\n"
+gdb_expect {
+  -re "9\[ \t\]*\}.*$gdb_prompt $"\
+          {pass "step in solib call"}
+  -re "$gdb_prompt $"\
+          {fail "step in solib call"}
+  timeout {fail "(timeout) step in solib call"}
+}
+
+# Verify that we can step out of the shlib call, and back out into
+# the caller.
+#
+send_gdb "next\n"
+gdb_expect {
+    -re "0x\[0-9a-f\]*\[ \t\]*9\[ \t\]*.*$gdb_prompt $" {
+	# we haven't left the callee yet, so do another next
+	send_gdb "next\n"
+	gdb_expect {
+	    -re "main .. at.*so-impl-ld.c:18.*$gdb_prompt $"\
+		{pass "step out of solib call"}
+	    -re "$gdb_prompt $"\
+		{fail "step out of solib call"}
+	    timeout {fail "(timeout) step out of solib call"}
+	}
+    }
+
+    -re "main .. at.*so-impl-ld.c:18.*$gdb_prompt $"\
+	{pass "step out of solib call"}
+    -re "$gdb_prompt $"\
+	{fail "step out of solib call"}
+    timeout {fail "(timeout) step out of solib call"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/so-indr-cl.c b/gdb/testsuite/gdb.base/so-indr-cl.c
new file mode 100644
index 0000000..dc29bad
--- /dev/null
+++ b/gdb/testsuite/gdb.base/so-indr-cl.c
@@ -0,0 +1,23 @@
+/* This program is linked against SOM shared libraries, which the loader
+   automatically loads along with the program itself).
+   */
+
+#include <stdio.h>
+
+extern int solib_main (int);
+
+static int
+solib_wrapper (function)
+  int (*function)(int);
+{
+  return (*function)(100);
+}
+
+
+main ()
+{
+  int  result;
+
+  /* This is an indirect call to solib_main. */
+  result = solib_wrapper (solib_main);
+}
diff --git a/gdb/testsuite/gdb.base/so-indr-cl.exp b/gdb/testsuite/gdb.base/so-indr-cl.exp
new file mode 100644
index 0000000..e37878e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/so-indr-cl.exp
@@ -0,0 +1,146 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+# This test is presently only valid on HP-UX, since it requires
+# that we use HP-UX-specific compiler & linker options to build
+# the testcase.
+#
+setup_xfail "*-*-*"
+clear_xfail "hppa*-*-*hpux*"
+
+set libfile "solib"
+set testfile "so-indr-cl"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# Build the shared libraries this test case needs.
+#
+#cd ${subdir}
+#remote_exec build "$CC -g +z -c ${libfile}1.c -o ${libfile}1.o"
+
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=+z"
+    } else {
+	# don't know what the compiler is...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags "additional_flags=-fpic"
+}
+if {[gdb_compile "${srcdir}/${subdir}/${libfile}1.c" "${objdir}/${subdir}/${libfile}1.o" object [list debug $additional_flags]] != ""} {
+    perror "Couldn't compile ${libfile}1.c"
+    return -1
+}
+
+if [istarget "hppa*-hp-hpux*"] then {
+    remote_exec build "ld -b ${objdir}/${subdir}/${libfile}1.o -o ${objdir}/${subdir}/${libfile}1.sl"
+} else {
+    set additional_flags "additional_flags=-shared"
+    gdb_compile "${objdir}/${subdir}/${libfile}1.o" "${objdir}/${subdir}/${libfile}1.sl" executable [list debug $additional_flags]
+}
+
+# Build the test case
+#remote_exec build "$CC -Aa -g ${srcfile} ${libfile}1.sl -o ${binfile}"
+
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=-Ae"
+    } else {
+	# don't know what the compiler is, hope for the best, maybe it's ANSI...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags ""
+}
+if {[gdb_compile "${srcdir}/${subdir}/${srcfile} ${objdir}/${subdir}/${libfile}1.sl" "${binfile}" executable [list debug $additional_flags]] != ""} {
+    perror "Couldn't build ${binfile}"
+    return -1
+}
+
+#cd ..
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This program implicitly loads SOM shared libraries.  We wish to test
+# whether a user can set breakpoints in a shlib before running the
+# program, where the program doesn't directly call the shlib, but
+# indirectly does via passing its address to another function.
+#
+# ??rehrauer: Currently, this doesn't work, but we do catch the case
+# and explicitly disallow it.  The reason it fails appears to be that
+#
+#  [1] gdb consults only the linker symbol table in this scenario, and
+#  [2] For a shlib function that is only indirectly called from the
+#      main a.out, there is in the linker symbol table a stub whose
+#      address is negative.  Possibly this is to be interpreted as
+#      an index into the DLT??
+#
+send_gdb "break solib_main\n"
+gdb_expect {
+  -re "Cannot break on solib_main without a running program.*$gdb_prompt $"\
+          {pass "break on indirect solib call before running"}
+  -re "$gdb_prompt $"\
+          {fail "break on indirect solib call before running"}
+  timeout {fail "(timeout) break on indirect solib call before running"}
+}
+
+# However, if we do run to the program's main, we then ought to be
+# able to set a breakpoint on the indirectly called function.  (Apparently,
+# once the inferior is running, gdb consults the debug info rather than
+# the linker symbol table, and is able to find the correct address.)
+#
+if ![runto_main] then { fail "indirect solib call tests suppressed" }
+
+# Verify that we can step over the first shlib call.
+#
+send_gdb "break solib_main\n"
+gdb_expect {
+  -re ".*\[Bb\]reakpoint \[0-9\]* at 0x\[0-9a-fA-F\]*: file.*${libfile}1.c.*$gdb_prompt $"\
+          {pass "break on indirect solib call after running"}
+  -re "$gdb_prompt $"\
+          {fail "break on indirect solib call after running"}
+  timeout {fail "(timeout) break on indirect solib call after running"}
+}
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/solib.c b/gdb/testsuite/gdb.base/solib.c
new file mode 100644
index 0000000..ff9d359
--- /dev/null
+++ b/gdb/testsuite/gdb.base/solib.c
@@ -0,0 +1,59 @@
+/* This program uses HP-UX-specific features to load and unload SOM
+   shared libraries that it wasn't linked against (i.e., libraries
+   that the loader doesn't automatically load along with the program
+   itself).
+   */
+
+#include <stdio.h>
+#include <dl.h>
+
+main ()
+{
+  shl_t  solib_handle;
+  int  dummy;
+  int  status;
+  int  (*solib_main) ();
+
+  /* Load a shlib, with immediate binding of all symbols.
+
+     Note that the pathname of the loaded shlib is assumed to be relative
+     to the testsuite directory (from whence the tested GDB is run), not
+     from dot/.
+   */
+  dummy = 1;  /* Put some code between shl_ calls... */
+  solib_handle = shl_load ("gdb.base/solib1.sl", BIND_IMMEDIATE, 0);
+
+  /* Find a function within the shlib, and call it. */
+  status = shl_findsym (&solib_handle,
+                        "solib_main",
+                        TYPE_PROCEDURE,
+                        (long *) &solib_main);
+  status = (*solib_main) (dummy);
+
+  /* Unload the shlib. */
+  status = shl_unload (solib_handle);
+
+  /* Load a different shlib, with deferred binding of all symbols. */
+  dummy = 2;
+  solib_handle = shl_load ("gdb.base/solib2.sl", BIND_DEFERRED, 0);
+
+  /* Find a function within the shlib, and call it. */
+  status = shl_findsym (&solib_handle,
+                        "solib_main",
+                        TYPE_PROCEDURE,
+                        (long *) &solib_main);
+  status = (*solib_main) (dummy);
+
+  /* Unload the shlib. */
+  status = shl_unload (solib_handle);
+
+  /* Reload the first shlib again, with deferred symbol binding this time. */
+  dummy = 3;
+  solib_handle = shl_load ("gdb.base/solib1.sl", BIND_IMMEDIATE, 0);
+
+  /* Unload it without trying to find any symbols in it. */
+  status = shl_unload (solib_handle);
+
+  /* All done. */
+  dummy = -1;
+}
diff --git a/gdb/testsuite/gdb.base/solib.exp b/gdb/testsuite/gdb.base/solib.exp
new file mode 100644
index 0000000..f452194
--- /dev/null
+++ b/gdb/testsuite/gdb.base/solib.exp
@@ -0,0 +1,319 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+# This test is presently only valid on HP-UX.  It verifies GDB's
+# ability to catch loads and unloads of shared libraries.
+#
+
+#setup_xfail "*-*-*"
+#clear_xfail "hppa*-*-*hpux*"
+if {![istarget "hppa*-*-hpux*"]} {
+    return 0
+}
+
+set testfile "solib"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# Build the shared libraries this test case needs.
+#
+#cd ${subdir}
+#remote_exec build "$CC -g +z -c ${testfile}1.c -o ${testfile}1.o"
+#remote_exec build "$CC -g +z -c ${testfile}2.c -o ${testfile}2.o"
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=+z"
+    } else {
+	# don't know what the compiler is...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags "additional_flags=-fpic"
+}
+
+if {[gdb_compile "${srcdir}/${subdir}/${testfile}1.c" "${binfile}1.o" object [list debug $additional_flags]] != ""} {
+    perror "Couldn't compile ${testfile}1.c"
+    #return -1
+}
+if {[gdb_compile "${srcdir}/${subdir}/${testfile}2.c" "${binfile}2.o" object [list debug, $additional_flags]] != ""} {
+    perror "Couldn't compile ${testfile}2.c"
+    #return -1
+}
+
+if [istarget "hppa*-*-hpux*"] {
+    remote_exec build "ld -b ${binfile}1.o -o ${binfile}1.sl"
+    remote_exec build "ld -b ${binfile}2.o -o ${binfile}2.sl"
+} else {
+    set additional_flags "additional_flags=-shared"
+    gdb_compile "${binfile}1.o" "${binfile}1.sl" executable [list debug $additional_flags]
+    gdb_compile "${binfile}2.o" "${binfile}2.sl" executable [list debug $additional_flags]
+}
+#cd ..
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This program manually loads and unloads SOM shared libraries, via calls
+# to shl_load and shl_unload.
+#
+if ![runto_main] then { fail "catch load/unload tests suppressed" }
+
+# Verify that we complain if the user tells us to catch something we
+# don't understand.
+#
+send_gdb "catch a_cold\n"
+gdb_expect {
+  -re "Unknown event kind specified for catch.*$gdb_prompt $"\
+          {pass "bogus catch kind is disallowed"}
+  -re "$gdb_prompt $"\
+          {fail "bogus catch kind is disallowed"}
+  timeout {fail "(timeout) bogus catch kind is disallowed"}
+}
+
+# Verify that we can set a generic catchpoint on shlib loads.  I.e., that
+# we can catch any shlib load, without specifying the name.
+#
+send_gdb "catch load\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .load <any library>.*$gdb_prompt $"\
+          {pass "set generic catch load"}
+  -re "$gdb_prompt $"\
+          {fail "set generic catch load"}
+  timeout {fail "(timeout) set generic catch load"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\] .loaded gdb.base/solib1.sl.*$gdb_prompt $"\
+          {pass "caught generic solib load"}
+  -re "$gdb_prompt $"\
+          {fail "caught generic solib load"}
+  timeout {fail "(timeout) caught generic solib load"}
+}
+
+# Set a breakpoint on the line following the shl_load call, and
+# continue.
+#
+# ??rehrauer: It appears that we can't just say "finish" from here;
+# GDB is getting confused by the dld's presense on the stack.
+#
+send_gdb "break 27\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break after shl_load"}
+  -re "$gdb_prompt $"\
+          {fail "set break after shl_load"}
+  timeout {fail "(timeout) set break after shl_load"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*, main .. at .*solib.c:27.*$gdb_prompt $"\
+          {pass "continue after generic catch load"}
+  -re "$gdb_prompt $"\
+          {fail "continue after generic catch load"}
+  timeout {fail "(timeout) continue after generic catch load"}
+}
+
+# Step over the call to shl_findsym.
+#
+# ??rehrauer: In theory, since the call to shl_load asked for
+# immediate binding of the shlib's symbols, and since the
+# shlib's symbols should have been auto-loaded, we ought to
+# be able to set a breakpoint on solib_main now.  However,
+# that seems not to be the case.  Dunno why for sure; perhaps
+# the breakpoint wants to be set on an import stub in the
+# main program for solib_main?  There wouldn't be one, in
+# this case...
+# 
+send_gdb "next\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "step over shl_findsym"}
+  timeout {fail "(timeout) step over shl_findsym"}
+}
+
+# Verify that we can catch an unload of any library.
+#
+send_gdb "catch unload\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .unload <any library>.*$gdb_prompt $"\
+          {pass "set generic catch unload"}
+  -re "$gdb_prompt $"\
+          {fail "set generic catch unload"}
+  timeout {fail "(timeout) set generic catch load"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\] .unloaded gdb.base/solib1.sl.*$gdb_prompt $"\
+          {pass "caught generic solib unload"}
+  -re "$gdb_prompt $"\
+          {fail "caught generic solib unload"}
+  timeout {fail "(timeout) caught generic solib unload"}
+}
+
+# Verify that we can catch a load of a specific library.  (Delete
+# all the other catchpoints first, so that the generic catchpoints
+# we've previously set don't trigger.)
+#
+send_gdb "delete\n"
+gdb_expect {
+  -re "Delete all breakpoints.*y or n.*"\
+          {send_gdb "y\n"
+           gdb_expect {
+             -re "$gdb_prompt $"\
+                     {pass "delete all catchpoints"}
+             timeout {fail "(timeout) delete all catchpoints"}
+           }
+          }
+  -re "$gdb_prompt $"\
+          {fail "delete all catchpoints"}
+  timeout {fail "(timeout) delete all catchpoints"}
+}
+
+send_gdb "catch load gdb.base/solib2.sl\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .load gdb.base/solib2.sl.*$gdb_prompt $"\
+          {pass "set specific catch load"}
+  -re "$gdb_prompt $"\
+          {fail "set specific catch load"}
+  timeout {fail "(timeout) set specific catch load"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\] .loaded gdb.base/solib2.sl.*$gdb_prompt $"\
+          {pass "caught specific solib load"}
+  -re "$gdb_prompt $"\
+          {fail "caught specific solib load"}
+  timeout {fail "(timeout) caught specific solib load"}
+}
+
+# Verify that we can catch an unload of a specific library.
+#
+send_gdb "catch unload gdb.base/solib2.sl\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .unload gdb.base/solib2.sl.*$gdb_prompt $"\
+          {pass "set specific catch unload"}
+  -re "$gdb_prompt $"\
+          {fail "set specific catch unload"}
+  timeout {fail "(timeout) set specific catch unload"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\] .unloaded gdb.base/solib2.sl.*$gdb_prompt $"\
+          {pass "caught specific solib unload"}
+  -re "$gdb_prompt $"\
+          {fail "caught specific solib unload"}
+  timeout {fail "(timeout) caught specific solib unload"}
+}
+
+# Verify that we can set a catchpoint on a specific library that
+# happens not to be loaded by the program.  And, that this catchpoint
+# won't trigger inappropriately when other shlibs are loaded.
+#
+send_gdb "break 55\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break on shl_unload"}
+  -re "$gdb_prompt $"\
+          {fail "set break on shl_unload"}
+  timeout {fail "(timeout) set break on shl_unload"}
+}
+
+send_gdb "break 58\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break after shl_unload"}
+  -re "$gdb_prompt $"\
+          {fail "set break after shl_unload"}
+  timeout {fail "(timeout) set break after shl_unload"}
+}
+
+send_gdb "catch load foobar.sl\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .load foobar.sl.*$gdb_prompt $"\
+          {pass "set specific catch load for nonloaded shlib"}
+  -re "$gdb_prompt $"\
+          {fail "set specific catch load for nonloaded shlib"}
+  timeout {fail "(timeout) set specific catch load for nonloaded shlib"}
+}
+
+send_gdb "catch unload foobar.sl\n"
+gdb_expect {
+  -re "Catchpoint \[0-9\]* .unload foobar.sl.*$gdb_prompt $"\
+          {pass "set specific catch unload for nonloaded shlib"}
+  -re "$gdb_prompt $"\
+          {fail "set specific catch unload for nonloaded shlib"}
+  timeout {fail "(timeout) set specific catch unload for nonloaded shlib"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "specific catch load doesn't trigger inappropriately"}
+  -re "$gdb_prompt $"\
+          {fail "specific catch load doesn't trigger inappropriately"}
+  timeout {fail "(timeout) specific catch load doesn't trigger inappropriately"}
+}
+
+send_gdb "continue\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
+          {pass "specific catch unload doesn't trigger inappropriately"}
+  -re "$gdb_prompt $"\
+          {fail "specific catch unload doesn't trigger inappropriately"}
+  timeout {fail "(timeout) specific catch unload doesn't trigger inappropriately"}
+}
+
+# ??rehrauer: There ought to be testpoints here that verify that
+# load/unload catchpoints can use conditionals, can be temporary,
+# self-disabling, etc etc.
+#
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/solib1.c b/gdb/testsuite/gdb.base/solib1.c
new file mode 100644
index 0000000..eecf024
--- /dev/null
+++ b/gdb/testsuite/gdb.base/solib1.c
@@ -0,0 +1,9 @@
+/* This program is intended to be built as an HP-UX SOM shared
+   library, for use by the solib.exp testcase.  It simply returns
+   the square of its integer argument.
+   */
+int  solib_main (arg)
+  int  arg;
+{
+  return arg*arg;
+}
diff --git a/gdb/testsuite/gdb.base/solib2.c b/gdb/testsuite/gdb.base/solib2.c
new file mode 100644
index 0000000..2cd4513
--- /dev/null
+++ b/gdb/testsuite/gdb.base/solib2.c
@@ -0,0 +1,9 @@
+/* This program is intended to be built as an HP-UX SOM shared
+   library, for use by the solib.exp testcase.  It simply returns
+   the cube of its integer argument.
+   */
+int  solib_main (arg)
+  int  arg;
+{
+  return arg*arg*arg;
+}
diff --git a/gdb/testsuite/gdb.base/sparc-aout.u b/gdb/testsuite/gdb.base/sparc-aout.u
new file mode 100644
index 0000000..8b4eef9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sparc-aout.u
@@ -0,0 +1,732 @@
+begin 777 sparc-aout
+M@0,!"P  (    "          #YP  " @          "\$"  T .@0)(#H$25
+M*B "E *@!)0"0 H7   0U"+@H ,   C" &((@)   0*   0!    0   "@$ 
+M  !   @$ 0   $   -6<(Z @0  ( P$   !   @$ 0   )WCOV@O   (KA7B
+M*!$   B0$B(,0   2Y(0( "L$  (D@.@7$   $N4$" @@*(@(!*  $\!    
+MPA.@7H"@80L2@ !+ 0   .@#H&#" Z!DX@.@:*0%  &2!( 1+P  "*X5XDB0
+M$"  E! @!1<@  "6$N "F!  %D   #2:$"  IA  ") " !32 Z!DE! @!Q<@
+M  "6$N 2F!  %D   "N:$  4+P  "*X5XG01   (D!(B&T   ".2$"  JA  
+M",(#H&B D  ! H  "R\   BN%>)(D 3 $I(0 !&4$" '%R   )82X!*8$  5
+M0   %YH0( #" Z!PH 3  >8CH'SJ(Z" [".@A ,   C" &((PB.@B ,  !#"
+M &"@PB.@C ,   B"$&!DPB.@D) 0( &?Q   DA @?(''X B!Z   $(  !H(0
+M( 40@  $@A @1Q"   *"$" #D= @  J   0!    @</@" $   "0$" "D@7@
+M!-0%P ""$" $D= @ ) 0('^"$" !D= @    0  O=7-R+VQI8B]L9"YS;P O
+M9&5V+WIE<F\         &6-R=# Z(&YO("]U<W(O;&EB+VQD+G-O"@      
+M   F8W)T,#H@+W5S<B]L:6(O;&0N<V\@;6%P<&EN9R!F86EL=7)E"@      
+M !1C<G0P.B!N;R O9&5V+WIE<F\*      "=X[^0L! @ #"   &!Q^ (@>@ 
+M )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P@  !@<?@"('H  "=X[^0
+ML! @ #"   &!Q^ (@>@  )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P
+M@  !@<?@"('H  "=X[^0L! @ #"   &!Q^ (@>@  )WCOY"P$"  ,(   8''
+MX B!Z   G>._D+ 0(  P@  !@<?@"('H  "=X[^0L! @ #"   &!Q^ (@>@ 
+M )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P@  !@<?@"('H        
+MG>._D!$   C! B. ,(   8''X B!Z   G>._D!$  !#!&B"H,(   8''X B!
+MZ   0L@  )WCOWA   #D 0   !$  !# *B,0$0  $)(0( '2*B)8$0  $)(0
+M( +2*B%X$0  $)(0( /2,B$P$0  $)(0( 32,B$($0  $)(0( 72,B'@$0  
+M$)(0( ;2(B'($0  $)(0( ?2(B&@$0  $)(0( C2(B$ $0  $)(0( G2(B,(
+M$0  $)(0( K2(B)($0  $)(0( O2(B%@$0  $!,   C4 F.TU"(A*!$  ! 3
+M   0U!I@L-0Z(8@1   0$P  $-0*8Q#4*B&P$0  $!,  !#4"F)8U"HAF!$ 
+M ! 3   0U IA>-0J(.@1   0$P  $-0283#4,B)H$0  $!,  !#4$F$(U#(B
+M,!$  ! 3   0U!)AX-0R(5@1   0$P  $-0"8<C4(B% $0  $!,  !#4 F&@
+MU"(A.!$  ! 3   0U )A -0B(B@1   0$P  $-0"8PC4(B&H$0  $!,  !#4
+M F)(U"(AD!$  ! 3   0U )A8-0B(. 1   0$P  $-0"82C4(B)@$0  $!, 
+M !#4&F&(U#HA$!$  ! 5   0DA*C$-(B(/@1   0%0  $)(2HEC2(B#8$0  
+M$!4  !"2$J%XTB(AP!$  ! 5   0DA*A,-(B(7 1   0%0  $)(2H0C2(B%0
+M$0  $!4  !"2$J'@TB(C !$  ! 5   0DA*AR-(B(E 1   0%0  $)(2H:#2
+M(B(@$0  $!4  !"2$J$ TB(A2!$  ! 5   0DA*C"-(B(/ 1   0%0  $)(2
+MHDC2(B#0$0  $!4  !"2$J%@TB(AN!$  ! 5   0DA*A*-(B(6@1   0%0  
+M$)(2H8C2(B'8$0  $)(0( +2(B#($0  $)(0( +2(B(X$0  $)(0( '2(B'0
+M$0  $)(0( '2(B'H$0  $!,  !#4 F) U"(B<!$  ! 3   0U!)A(-0R(8"!
+MQ^ (@>@  )WCOY 1   0U (C(("BO_\2@  -DA(C(- "8 2 HB   H  "900
+M( "6 F $DA @ )("8 30 D +@*(@ !*___V4 J !DI*   2   H1   0HA(C
+M(*$J8 +0!  1G\(  * $/_R I"  -+___= $ !&!Q^ (@>@  )WCOY 1   0
+MT@(C'("B8  "@  )H!(C'- $  "?P@  H 0@!- $  " HB  $K__^P$    1
+M   )D!(BB$  !E62$"  @<?@"('H  "=X[^0$P  $- "8+R HB  $H  !) 0
+M( %____GT")@O(''X B!Z           0&P   26____Q   0'@   F6____
+MM   0(0   66____K   0)   $V6____3     4    6    2@          
+M    &     H    7    !    !D    )    50    T    A    (@   "T 
+M   G    1_____\         -@    #_____         $$         !@  
+M #X    "    %0    P    R    *@         K    ,P   "0    U    
+M!P   "0    !    (     ,    :    "    #@    +    ,     X    <
+M    #P   !L    0    )0   !$    =    $@   !X    3    'P   !0 
+M   Y    %0   "(    6    *P   !<   !&    &    ",    9    ,0  
+M !H    G    &P   "8    <    *    !T    J    '@   "D    ?    
+M/P   "    !!    (0   "P    C    +P   "4    N    )@         H
+M         "D    [    +    #8    M    -P   "X    T    +P   #T 
+M   P    .@   #$   !/    ,@         S    0@   #0         -0  
+M $4    W    /    #@   !     .0         Z         #L   !4    
+M/    %(    ]    0P   #X   !$    /P   $D   !     2    $(     
+M    0P        !$    30   $4   !*    1@   $P   !'    2P   $@ 
+M  !0    20   $X   !+    40   $P   !3    30        !.        
+M $\         4         !1         %(         4P          !0 '
+MC   ,[@    '!P &X0  0,@    ."0 %S   0R@    3!0 %#@  ("     9
+M 0 #8@         E 0 &X@         L!0 #?@  ([@    R!P %<@  0*  
+M   [!P '.0  0     !% 0 #H         !+!0  \P  (QP   !>!0 'KP  
+M(P@   !J"0 'SP  0,@   !S!0 "@P  (O0   "*"0 &]   0-    "A"0 #
+M^@  0-@   "X"0 '3P  0.    #/"0 $:0  0.@   #F"0 "K@  0/    #V
+M"0 (4@  0/@   $&"0 &@   00    $6"0  3   00@   $F"0  N0  01  
+M  $V"0 'Q@  02    $_"0 &R   02@   %("0 'F@  03    %1!0 $DP  
+M(U@   %E!0 ';P  (J0   %Y"0 " P  03@   &-!0  SP  (T0   &:!0 #
+MJP  (I    &G"0 &W0  04    &T!0 $I@  )TP   &\"0 (A   04@   '4
+M"0 &%   05    'L"0 %(P  05@   ($"0 $V0  06    (5"0 "]@  06@ 
+M  (F"0 &)@  07    (W"0 $9@  07@   )("0 '(   08    )2"0 %:P  
+M08@   )<!0 $Q0  (S    )Q!0 $=P  (N    *&"0  I0  09    *;"0 &
+M70  09@   *P!0 %)P  (X0   *^!0 %C0  (LP   +,"0 (1   0:    +:
+M"0 !NP  0:@   +H"0 '<P  0;    +V"0 'P@  0;@   ,/"0 $R   0<  
+M  ,H"0 '\   0<@   ,O"0 "^   0=    ,Z"0 '1   0=@   -,"0 !V@  
+M0>    ->"0 $G@  0>@   -G"0 '*P  0?    -R"0 '+   0@@   -]!0 #
+MF0  (VP   .3!0 &=0  (K@   .I"0 #S@  0B    ._"0 !"0  0B@   /5
+M"0  ;0  0C    /K"0 "=P  0C@   /W"0 '10  0D    /_!0 $G0  (YP 
+M  0."0 (80  0D@   0="0 %^@  0E    0L"0 '[@  0E@   0["0 !S0  
+M0F    1*"0 "F0  0F@   19"0 'A0  0G    1A"0 'K   0P    1["0 '
+MN0  0P@   2#"0 '1@  0Q    2+ 0 &=         24!P "F   0,    2F
+M"0 '<0  0Q@   2U"0 "TP  0R    3$!0 &>0  )P    37!0 &B0  )H@ 
+M  3J!P %H   0+A?971E>'0 7V5D871A %]E;F0 <W1A<G0 <W1A<G1?9FQO
+M870 7U]E>&ET %]M86EN %]E;G9I<F]N %]?1%E.04U)0P!?97AI= !?=E]S
+M:6=N961?:6YT7V9U;F, 7W9?:6YT7V9U;F, 7W!R:6UA<GD 7W9?=6YS:6=N
+M961?<VAO<G1?9G5N8P!?=E]S:6=N961?;&]N9U]P;VEN=&5R %]V7W-I9VYE
+M9%]C:&%R7W!O:6YT97( 7W9?=6YS:6=N961?;&]N9U]A<G)A>0!?=E]U;G-I
+M9VYE9%]C:&%R7V%R<F%Y %]V7VQO;F=?<&]I;G1E<@!?=E]C:&%R7W!O:6YT
+M97( 7W9?=6YS:6=N961?:6YT %]V7W-I9VYE9%]S:&]R= !?=E]D;W5B;&5?
+M87)R87D 7W9?=6YI;VX 7W9?9FQO870 7W9?<VAO<G0 7W9?<VEG;F5D7VQO
+M;F=?9G5N8P!?=E]S:6=N961?8VAA<E]F=6YC %]V7W-I9VYE9%]I;G1?87)R
+M87D 7W9?;&]N9U]F=6YC %]V7V-H87)?9G5N8P!?=E]I;G1?87)R87D 7U]?
+M;6%I;@!?=E]U;G-I9VYE9%]I;G1?<&]I;G1E<@!?=E]S:6=N961?<VAO<G1?
+M<&]I;G1E<@!?=E]U;G-I9VYE9%]S:&]R=%]A<G)A>0!?=E]U;G-I9VYE9%]L
+M;VYG %]V7V9L;V%T7W!O:6YT97( 7W9?<VAO<G1?<&]I;G1E<@!?=E]U;G-I
+M9VYE9%]C:&%R %]V7W5N:6]N,@!?=E]D;W5B;&4 7W9?=6YS:6=N961?:6YT
+M7V9U;F, 7W9?<VEG;F5D7W-H;W)T7V9U;F, 7W9?<VEG;F5D7VQO;F=?87)R
+M87D 7W9?<VEG;F5D7V-H87)?87)R87D 7W9?9FQO871?9G5N8P!?=E]S:&]R
+M=%]F=6YC %]V7W-I9VYE9%]I;G0 7W9?;&]N9U]A<G)A>0!?=E]C:&%R7V%R
+M<F%Y %]V7W5N<VEG;F5D7VQO;F=?<&]I;G1E<@!?=E]U;G-I9VYE9%]C:&%R
+M7W!O:6YT97( 7W9?:6YT %]S<&]R='-C87( 7W9?9&]U8FQE7W!O:6YT97( 
+M7W9?=6YS:6=N961?<VAO<G0 7V-L=6YK97( 7W9?<W1R=6-T,0!?=E]S=')U
+M8W0R %]V7W5N<VEG;F5D7VQO;F=?9G5N8P!?=E]U;G-I9VYE9%]C:&%R7V9U
+M;F, 7W9?<VEG;F5D7VEN=%]P;VEN=&5R %]V7W5N<VEG;F5D7VEN=%]A<G)A
+M>0!?=E]S:6=N961?<VAO<G1?87)R87D 7VYO;G!R:6UA<GD 7W-?;&EN:P!?
+M=E]D;W5B;&5?9G5N8P!?=E]S:6=N961?;&]N9P!?=E]I;G1?<&]I;G1E<@!?
+M=E]S:6=N961?8VAA<@!?=E]F;&]A=%]A<G)A>0!?=E]S:&]R=%]A<G)A>0!?
+M=5]L:6YK %]V7W5N<VEG;F5D7W-H;W)T7W!O:6YT97( 7W9?;&]N9P!?=E]C
+M:&%R %]O;E]E>&ET %]?97AI=%]D=6UM>5]D96-L %]?7T-43U)?3$E35%]?
+M %]?7T143U)?3$E35%]? %]?7V1O7V=L;V)A;%]C=&]R<P!?7U]D;U]G;&]B
+M86Q?9'1O<G, 7U]E>&ET7V1U;6UY7W)E9@       "]U<W(O;&]C86PO;&EB
+M+V=C8RUL:6(O<W5N-"\R+C$O.B]U<W(O;&]C86PO;&EB+P             3
+MD(       0 &     &,                                         
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M       #  ! #   0"0                                        3
+M@   $T@  $!<  ! 8   !W@   >H   *6          5   .2   !0   "  
+M    /   0  #    @<!@  $   "=X[^@?____ $   "=X[^@?___^0$   &=
+MX[^@?___]@$   *=X[^@?___\P$   ,                          $!I
+M          ! P                                               
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M          0&      !       X$       @(    !4$       BD    !T$
+M       BD    "QD       BD    %5D       BD    %V             
+M '^              )&              +B              -&         
+M     .^              0V              2>              4F     
+M         6R              8F              :6              ;> 
+M             <J              >*              >Z             
+M HB               !$  !Y   BD     !$  !Y   BE     !$  !Y   B
+MG    QHD       BD     !$  !Z   BI     !$  !Z   BJ     !$  !Z
+M   BL    RDD       BI     !$  ![   BN     !$  ![   BO     !$
+M  ![   BQ    T D       BN     !$  !]   BS     !$  !]   BT   
+M  !$  !]   BV    UDD       BS     !$  !^   BX     !$  !^   B
+MY     !$  !^   B[    VDD       BX     !$  !_   B]     !$  !_
+M   B^     !$  !_   C     X D       B]     !$  "!   C"     !$
+M  "!   C#     !$  "!   C%    YDD       C"     !$  ""   C'   
+M  !$  ""   C(     !$  ""   C*    Z<D       C'     !$  "#   C
+M,     !$  "#   C-     !$  "#   C/    [PD       C,     !$  "%
+M   C1     !$  "%   C2     !$  "%   C4    ],D       C1     !$
+M  "&   C6     !$  "&   C7     !$  "&   C9    ^(D       C6   
+M  !$  "'   C;     !$  "'   C<     !$  "'   C>    _@D       C
+M;     !$  ")   CA     !$  ")   CB     !$  ")   CE   !! D    
+M   CA     !$  "*   CG     !$  "*   CH     !$  "*   CK   !"$D
+M       CG   !#.             !)^             !-^             
+M!0:             !2*             !4"             !5R         
+M    !6F               !$  "R   CN     !$  "U   CQ     !$  "V
+M   CS     !$  "W   CV     !$  "Y   CY     !$  "Z   C\     !$
+M  "[   C_     !$  "]   D"     !$  "^   D%     !$  "_   D(   
+M  !$  #!   D+     !$  #"   D.     !$  ##   D1     !$  #%   D
+M4     !$  #&   D8     !$  #)   D<     !$  #*   D@     !$  #+
+M   DD     !$  #-   DH     !$  #.   DL     !$  #/   DP     !$
+M  #1   DT     !$  #2   DX     !$  #3   D\     !$  #5   E    
+M  !$  #6   E$     !$  #7   E(     !$  #9   E,     !$  #:   E
+M0     !$  #<   E4     !$  #=   E8     !$  #>   E<     !$  #@
+M   E@     !$  #A   ED     !$  #B   EH     !$  #D   EL     !$
+M  #E   EP     !$  #F   ET     !$  #H   EX     !$  #I   E\   
+M  !$  #J   F      !$  #L   F$     !$  #M   F(     !$  #O   F
+M,     !$  #P   F/     !$  #Q   F2     !$  #R   F5     !$  #T
+M   F8     !$  #V   F<     !$  #W   F@     !$  #W   F@   !98D
+M       CN   !9X@            !:@@            !;H@            
+M!<X@            !=D@            !>L@            !?\@        
+M    !@@@            !A@@            !BH@            !C0@    
+M        !D4@            !E@@            !F0@            !G$@
+M            !HP@            !J\@            !M0@            
+M!O @            !PD@            !RX@            !T@@        
+M    !U\@            !X(@            !YT@            ![4@    
+M        !]D@            !_8@            "!0@            ""H@
+M            "$@@            "&@@            "'\@            
+M")H@            "+H@            ",\@            ".@@        
+M    "08@            "1P@            "38@            "54@    
+M        "6T@            "88@            "90@            "B\@
+M            "CL@            "LX@            "MD@            
+M"N0@            "P@@            "Q<@            "S4@        
+M    "T,$       FB   "TP$       FB   "UL&      ! O   "VID    
+M   FB   "WUD       FB   "XF             "ZN             "[V 
+M            "^2             "_V             #!N             
+M##F             #%.             #'6             #)B         
+M    #+6             #-&             #..             #/:     
+M        #0Z             #1J             #6N             #7B 
+M            #8*             #8V             #;:             
+M#=R             #?$D       FB   #@<@            #AXD       G
+M    #C0D       G3   #C\$       G>   #D<$       G>   #E9D    
+M   G>   #FED       G>   #G6             #I>             #JF 
+M            #M"             #NF             #P>             
+M#R6             #S^             #V&             #X2         
+M    #Z&             #[V             #\^             #^*     
+M        #_J             $ :             $%>             $&2 
+M            $&Z             $'F             $**             
+M$,B             $-T@            $/$@            $0X@        
+M    $2 $       G>   $21D       G>     !$ /__   G>   $2L%  >,
+M   SN   $3('  ;A  ! R   $3D)  7,  !#*   $3X%  4.   @(   $40%
+M  -^   CN   $4H'  5R  ! H   $5,%  #S   C'   $68%  >O   C"   
+M$7()  ?/  ! R   $7L%  *#   B]   $9()  ;T  ! T   $:D)  /Z  ! 
+MV   $< )  =/  ! X   $=<)  1I  ! Z   $>X)  *N  ! \   $?X)  A2
+M  ! ^   $@X)  :   !!    $AX)  !,  !!"   $BX)  "Y  !!$   $CX)
+M  ?&  !!(   $D<)  ;(  !!*   $E )  >:  !!,   $ED%  23   C6   
+M$FT%  =O   BI   $H$)  (#  !!.   $I4%  #/   C1   $J(%  .K   B
+MD   $J\)  ;=  !!0   $KP%  2F   G3   $L0)  B$  !!2   $MP)  84
+M  !!4   $O0)  4C  !!6   $PP)  39  !!8   $QT)  +V  !!:   $RX)
+M  8F  !!<   $S\)  1F  !!>   $U )  <@  !!@   $UH)  5K  !!B   
+M$V0%  3%   C,   $WD%  1W   BX   $XX)  "E  !!D   $Z,)  9=  !!
+MF   $[@%  4G   CA   $\8%  6-   BS   $]0)  A$  !!H   $^()  &[
+M  !!J   $_ )  =S  !!L   $_X)  ?"  !!N   %!<)  3(  !!P   %# )
+M  ?P  !!R   %#<)  +X  !!T   %$()  =$  !!V   %%0)  ':  !!X   
+M%&8)  2>  !!Z   %&\)  <K  !!\   %'H)  <L  !""   %(4%  .9   C
+M;   %)L%  9U   BN   %+$)  /.  !"(   %,<)  $)  !"*   %-T)  !M
+M  !",   %/,)  )W  !".   %/\)  =%  !"0   %0<%  2=   CG   %18)
+M  AA  !"2   %24)  7Z  !"4   %30)  ?N  !"6   %4,)  '-  !"8   
+M%5()  *9  !":   %6$)  >%  !"<   %6D)  >L  !#    %8,)  >Y  !#
+M"   %8L)  =&  !#$   %9,'  *8  ! P   %:4)  =Q  !#&   %;0)  +3
+M  !#(   %<,%  9Y   G    %=8%  :)   FB   %>D'  6@  ! N   %?I?
+M7T193D%-24, 8W)T,"YO &=D8FUE+F\ 9V-C,E]C;VUP:6QE9"X +VAO;64O
+M9VYU+V=D8B]W;W)K+VYE=R]D979O+V=D8G1E<W0O=#$P+P!G9&)M92YC &EN
+M=#IT,3UR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W.P!C:&%R.G0R/7(R.S [
+M,3(W.P!L;VYG(&EN=#IT,SUR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W.P!U
+M;G-I9VYE9"!I;G0Z=#0]<C$[,#LM,3L ;&]N9R!U;G-I9VYE9"!I;G0Z=#4]
+M<C$[,#LM,3L <VAO<G0@:6YT.G0V/7(Q.RTS,C<V.#LS,C<V-SL ;&]N9R!L
+M;VYG(&EN=#IT-SUR,3LP.RTQ.P!S:&]R="!U;G-I9VYE9"!I;G0Z=#@]<C$[
+M,#LV-34S-3L ;&]N9R!L;VYG('5N<VEG;F5D(&EN=#IT.3UR,3LP.RTQ.P!S
+M:6=N960@8VAA<CIT,3 ]<C$[+3$R.#LQ,C<[ '5N<VEG;F5D(&-H87(Z=#$Q
+M/7(Q.S [,C4U.P!F;&]A=#IT,3(]<C$[-#LP.P!D;W5B;&4Z=#$S/7(Q.S@[
+M,#L ;&]N9R!D;W5B;&4Z=#$T/7(Q.S@[,#L =F]I9#IT,34],34 =%]S=')U
+M8W0Z5#$V/7,R-'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z
+M-BPQ-BPQ-CMV7VEN=%]M96UB97(Z,2PS,BPS,CMV7VQO;F=?;65M8F5R.C,L
+M-C0L,S([=E]F;&]A=%]M96UB97(Z,3(L.38L,S([=E]D;W5B;&5?;65M8F5R
+M.C$S+#$R."PV-#L[ '1?=6YI;VXZ5#$W/74X=E]C:&%R7VUE;6)E<CHR+# L
+M.#MV7W-H;W)T7VUE;6)E<CHV+# L,38[=E]I;G1?;65M8F5R.C$L,"PS,CMV
+M7VQO;F=?;65M8F5R.C,L,"PS,CMV7V9L;V%T7VUE;6)E<CHQ,BPP+#,R.W9?
+M9&]U8FQE7VUE;6)E<CHQ,RPP+#8T.SL =E]C:&%R7V9U;F,Z1C( =E]S:6=N
+M961?8VAA<E]F=6YC.D8Q, !V7W5N<VEG;F5D7V-H87)?9G5N8SI&,3$ =E]S
+M:&]R=%]F=6YC.D8V '9?<VEG;F5D7W-H;W)T7V9U;F,Z1C8 =E]U;G-I9VYE
+M9%]S:&]R=%]F=6YC.D8X '9?:6YT7V9U;F,Z1C$ =E]S:6=N961?:6YT7V9U
+M;F,Z1C$ =E]U;G-I9VYE9%]I;G1?9G5N8SI&- !V7VQO;F=?9G5N8SI&,P!V
+M7W-I9VYE9%]L;VYG7V9U;F,Z1C, =E]U;G-I9VYE9%]L;VYG7V9U;F,Z1C4 
+M=E]F;&]A=%]F=6YC.D8Q,@!V7V1O=6)L95]F=6YC.D8Q,P!L:6YK.E0Q.#US
+M,34R;F5X=#HQ.3TJ,3@L,"PS,CML:6YK9G5N8SHR,#TJ,C$]9C$Y+#,R+#,R
+M.W-T=69F.C(R/6%R,3LP.S [,C,]87(Q.S [,3LR-#UA<C$[,#LR.S$V+#8T
+M+#$Q-3([.P!T=5]L:6YK.E0R-3UU,30T;F5X=#HQ.2PP+#,R.VQI;FMF=6YC
+M.C(P+# L,S([<W1U9F8Z,C(L,"PQ,34R.SL 8V]L;W)S.E0R-CUE>65L;&]W
+M.C L<'5R<&QE.C$L<&EN:SHR+#L 8V%R<SI4,C<]96)M=SHP+'!O<G-C:&4Z
+M,2P[ &)O;VQE86XZ=#(X/65&04Q313HP+%12544Z,2P[ &)V86QS.E0R.3UE
+M9F%L<V4Z,"QT<G5E.C$L.P!B;V]L96%N,CIT,CD ;6ES;W)D97)E9#I4,S ]
+M971W;SHR+&]N93HQ+'IE<F\Z,"QT:')E93HS+#L ;6%I;CI&,0!V7V-H87(Z
+M1S( =E]S:6=N961?8VAA<CI',3  =E]U;G-I9VYE9%]C:&%R.D<Q,0!V7W-H
+M;W)T.D<V '9?<VEG;F5D7W-H;W)T.D<V '9?=6YS:6=N961?<VAO<G0Z1S@ 
+M=E]I;G0Z1S$ =E]S:6=N961?:6YT.D<Q '9?=6YS:6=N961?:6YT.D<T '9?
+M;&]N9SI',P!V7W-I9VYE9%]L;VYG.D<S '9?=6YS:6=N961?;&]N9SI'-0!V
+M7V9L;V%T.D<Q,@!V7V1O=6)L93I',3, =E]C:&%R7V%R<F%Y.D<S,3UA<C$[
+M,#LQ.S( =E]S:6=N961?8VAA<E]A<G)A>3I',S(]87(Q.S [,3LQ, !V7W5N
+M<VEG;F5D7V-H87)?87)R87DZ1S,S/6%R,3LP.S$[,3$ =E]S:&]R=%]A<G)A
+M>3I',S0]87(Q.S [,3LV '9?<VEG;F5D7W-H;W)T7V%R<F%Y.D<S- !V7W5N
+M<VEG;F5D7W-H;W)T7V%R<F%Y.D<S-3UA<C$[,#LQ.S@ =E]I;G1?87)R87DZ
+M1S,V/6%R,3LP.S$[,0!V7W-I9VYE9%]I;G1?87)R87DZ1S,V '9?=6YS:6=N
+M961?:6YT7V%R<F%Y.D<S-SUA<C$[,#LQ.S0 =E]L;VYG7V%R<F%Y.D<S.#UA
+M<C$[,#LQ.S, =E]S:6=N961?;&]N9U]A<G)A>3I',S@ =E]U;G-I9VYE9%]L
+M;VYG7V%R<F%Y.D<S.3UA<C$[,#LQ.S4 =E]F;&]A=%]A<G)A>3I'-# ]87(Q
+M.S [,3LQ,@!V7V1O=6)L95]A<G)A>3I'-#$]87(Q.S [,3LQ,P!V7V-H87)?
+M<&]I;G1E<CI'-#(]*C( =E]S:6=N961?8VAA<E]P;VEN=&5R.D<T,STJ,3  
+M=E]U;G-I9VYE9%]C:&%R7W!O:6YT97(Z1S0T/2HQ,0!V7W-H;W)T7W!O:6YT
+M97(Z1S0U/2HV '9?<VEG;F5D7W-H;W)T7W!O:6YT97(Z1S0U '9?=6YS:6=N
+M961?<VAO<G1?<&]I;G1E<CI'-#8]*C@ =E]I;G1?<&]I;G1E<CI'-#<]*C$ 
+M=E]S:6=N961?:6YT7W!O:6YT97(Z1S0W '9?=6YS:6=N961?:6YT7W!O:6YT
+M97(Z1S0X/2HT '9?;&]N9U]P;VEN=&5R.D<T.3TJ,P!V7W-I9VYE9%]L;VYG
+M7W!O:6YT97(Z1S0Y '9?=6YS:6=N961?;&]N9U]P;VEN=&5R.D<U,#TJ-0!V
+M7V9L;V%T7W!O:6YT97(Z1S4Q/2HQ,@!V7V1O=6)L95]P;VEN=&5R.D<U,CTJ
+M,3, =E]S=')U8W0Q.D<Q-@!V7W-T<G5C=#(Z1S4S/7,R-'9?8VAA<E]M96UB
+M97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z-BPQ-BPQ-CMV7VEN=%]M96UB97(Z
+M,2PS,BPS,CMV7VQO;F=?;65M8F5R.C,L-C0L,S([=E]F;&]A=%]M96UB97(Z
+M,3(L.38L,S([=E]D;W5B;&5?;65M8F5R.C$S+#$R."PV-#L[ '9?=6YI;VXZ
+M1S$W '9?=6YI;VXR.D<U-#UU.'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R
+M=%]M96UB97(Z-BPP+#$V.W9?:6YT7VUE;6)E<CHQ+# L,S([=E]L;VYG7VUE
+M;6)E<CHS+# L,S([=E]F;&]A=%]M96UB97(Z,3(L,"PS,CMV7V1O=6)L95]M
+M96UB97(Z,3,L,"PV-#L[ '-?;&EN:SI',3D =5]L:6YK.D<R-0!P<FEM87)Y
+M.D<U-3UE<F5D.C L9W)E96XZ,2QB;'5E.C(L.P!N;VYP<FEM87)Y.D<R-@!C
+M;'5N:V5R.D<U-CUE8VAE=GDZ,"QF;W)D.C$L.P!S<&]R='-C87(Z1S(W %]?
+M;6%I;BYO &=C8S)?8V]M<&EL960N %]I;FET:6%L:7IE9"XP "]G;G4O9V-C
+M+V=C8S(O<W)C+P N+VQI8F=C8S(N8P!I;G0Z=#$]<C$[+3(Q-#<T.#,V-#@[
+M,C$T-S0X,S8T-SL 8VAA<CIT,CUR,CLP.S$R-SL ;&]N9R!I;G0Z=#,]<C$[
+M+3(Q-#<T.#,V-#@[,C$T-S0X,S8T-SL =6YS:6=N960@:6YT.G0T/7(Q.S [
+M+3$[ &QO;F<@=6YS:6=N960@:6YT.G0U/7(Q.S [+3$[ '-H;W)T(&EN=#IT
+M-CUR,3LM,S(W-C@[,S(W-C<[ &QO;F<@;&]N9R!I;G0Z=#<]<C$[,#LM,3L 
+M<VAO<G0@=6YS:6=N960@:6YT.G0X/7(Q.S [-C4U,S4[ &QO;F<@;&]N9R!U
+M;G-I9VYE9"!I;G0Z=#D]<C$[,#LM,3L <VEG;F5D(&-H87(Z=#$P/7(Q.RTQ
+M,C@[,3(W.P!U;G-I9VYE9"!C:&%R.G0Q,3UR,3LP.S(U-3L 9FQO870Z=#$R
+M/7(Q.S0[,#L 9&]U8FQE.G0Q,SUR,3LX.S [ &QO;F<@9&]U8FQE.G0Q-#UR
+M,3LX.S [ '9O:60Z=#$U/3$U ')E9U]C;&%S<SI4,38]94Y/7U)%1U,Z,"Q'
+M14Y%4D%,7U)%1U,Z,2Q&4%]214=3.C(L04Q,7U)%1U,Z,RQ,24U?4D5'7T-,
+M05-315,Z-"P[ '!T<F1I9F9?=#IT,0!S:7IE7W0Z=#$ =V-H87)?=#IT. !L
+M;VYG;&]N9SI4,3<]<SAH:6=H.C,L,"PS,CML;W<Z,RPS,BPS,CL[ &QO;F=?
+M;&]N9SIT,3@]=3AS.C$W+# L-C0[;&PZ-RPP+#8T.SL 9G5N8U]P='(Z=#$Y
+M/2HR,#UF,34 7U]D;U]G;&]B86Q?9'1O<G,Z1C$U %]E>&ET7V1U;6UY7W)E
+M9CI',C$]*C$ 7U]D;U]G;&]B86Q?8W1O<G,Z1C$U %]?;6%I;CI&,34 7V5X
+M:70N;P!G8V,R7V-O;7!I;&5D+@ O9VYU+V=C8R]G8V,R+W-R8R\ +B]L:6)G
+M8V,R+F, :6YT.G0Q/7(Q.RTR,30W-#@S-C0X.S(Q-#<T.#,V-#<[ &-H87(Z
+M=#(]<C([,#LQ,C<[ &QO;F<@:6YT.G0S/7(Q.RTR,30W-#@S-C0X.S(Q-#<T
+M.#,V-#<[ '5N<VEG;F5D(&EN=#IT-#UR,3LP.RTQ.P!L;VYG('5N<VEG;F5D
+M(&EN=#IT-3UR,3LP.RTQ.P!S:&]R="!I;G0Z=#8]<C$[+3,R-S8X.S,R-S8W
+M.P!L;VYG(&QO;F<@:6YT.G0W/7(Q.S [+3$[ '-H;W)T('5N<VEG;F5D(&EN
+M=#IT.#UR,3LP.S8U-3,U.P!L;VYG(&QO;F<@=6YS:6=N960@:6YT.G0Y/7(Q
+M.S [+3$[ '-I9VYE9"!C:&%R.G0Q,#UR,3LM,3(X.S$R-SL =6YS:6=N960@
+M8VAA<CIT,3$]<C$[,#LR-34[ &9L;V%T.G0Q,CUR,3LT.S [ &1O=6)L93IT
+M,3,]<C$[.#LP.P!L;VYG(&1O=6)L93IT,30]<C$[.#LP.P!V;VED.G0Q-3TQ
+M-0!R96=?8VQA<W,Z5#$V/65.3U]214=3.C L1T5.15)!3%]214=3.C$L1E!?
+M4D5'4SHR+$%,3%]214=3.C,L3$E-7U)%1U]#3$%34T53.C0L.P!P=')D:69F
+M7W0Z=#$ <VEZ95]T.G0Q '=C:&%R7W0Z=#@ ;&]N9VQO;F<Z5#$W/7,X:&EG
+M:#HS+# L,S([;&]W.C,L,S(L,S([.P!L;VYG7VQO;F<Z=#$X/74X<SHQ-RPP
+M+#8T.VQL.C<L,"PV-#L[ &9U;F-?<'1R.G0Q.3TJ,C ]9C$U %]E>&ET7V1U
+M;6UY7V1E8VPZ1S$ 7U]#5$]27TQ)4U1?7SI',C$]87(Q.S [,3LQ.0!?7T14
+M3U)?3$E35%]?.D<R,0 M;&< ;&EB9RYS %]E=&5X= !?961A=&$ 7V5N9 !S
+M=&%R= !?;6%I;@!?96YV:7)O;@!?=E]S:6=N961?:6YT7V9U;F, 7W9?:6YT
+M7V9U;F, 7W!R:6UA<GD 7W9?=6YS:6=N961?<VAO<G1?9G5N8P!?=E]S:6=N
+M961?;&]N9U]P;VEN=&5R %]V7W-I9VYE9%]C:&%R7W!O:6YT97( 7W9?=6YS
+M:6=N961?;&]N9U]A<G)A>0!?=E]U;G-I9VYE9%]C:&%R7V%R<F%Y %]V7VQO
+M;F=?<&]I;G1E<@!?=E]C:&%R7W!O:6YT97( 7W9?=6YS:6=N961?:6YT %]V
+M7W-I9VYE9%]S:&]R= !?=E]D;W5B;&5?87)R87D 7W9?=6YI;VX 7W9?9FQO
+M870 7W9?<VAO<G0 7W9?<VEG;F5D7VQO;F=?9G5N8P!?=E]S:6=N961?8VAA
+M<E]F=6YC %]V7W-I9VYE9%]I;G1?87)R87D 7W9?;&]N9U]F=6YC %]V7V-H
+M87)?9G5N8P!?=E]I;G1?87)R87D 7U]?;6%I;@!?=E]U;G-I9VYE9%]I;G1?
+M<&]I;G1E<@!?=E]S:6=N961?<VAO<G1?<&]I;G1E<@!?=E]U;G-I9VYE9%]S
+M:&]R=%]A<G)A>0!?=E]U;G-I9VYE9%]L;VYG %]V7V9L;V%T7W!O:6YT97( 
+M7W9?<VAO<G1?<&]I;G1E<@!?=E]U;G-I9VYE9%]C:&%R %]V7W5N:6]N,@!?
+M=E]D;W5B;&4 7W9?=6YS:6=N961?:6YT7V9U;F, 7W9?<VEG;F5D7W-H;W)T
+M7V9U;F, 7W9?<VEG;F5D7VQO;F=?87)R87D 7W9?<VEG;F5D7V-H87)?87)R
+M87D 7W9?9FQO871?9G5N8P!?=E]S:&]R=%]F=6YC %]V7W-I9VYE9%]I;G0 
+M7W9?;&]N9U]A<G)A>0!?=E]C:&%R7V%R<F%Y %]V7W5N<VEG;F5D7VQO;F=?
+M<&]I;G1E<@!?=E]U;G-I9VYE9%]C:&%R7W!O:6YT97( 7W9?:6YT %]S<&]R
+M='-C87( 7W9?9&]U8FQE7W!O:6YT97( 7W9?=6YS:6=N961?<VAO<G0 7V-L
+M=6YK97( 7W9?<W1R=6-T,0!?=E]S=')U8W0R %]V7W5N<VEG;F5D7VQO;F=?
+M9G5N8P!?=E]U;G-I9VYE9%]C:&%R7V9U;F, 7W9?<VEG;F5D7VEN=%]P;VEN
+M=&5R %]V7W5N<VEG;F5D7VEN=%]A<G)A>0!?=E]S:6=N961?<VAO<G1?87)R
+M87D 7VYO;G!R:6UA<GD 7W-?;&EN:P!?=E]D;W5B;&5?9G5N8P!?=E]S:6=N
+M961?;&]N9P!?=E]I;G1?<&]I;G1E<@!?=E]S:6=N961?8VAA<@!?=E]F;&]A
+M=%]A<G)A>0!?=E]S:&]R=%]A<G)A>0!?=5]L:6YK %]V7W5N<VEG;F5D7W-H
+M;W)T7W!O:6YT97( 7W9?;&]N9P!?=E]C:&%R %]?97AI=%]D=6UM>5]D96-L
+M %]?7T-43U)?3$E35%]? %]?7T143U)?3$E35%]? %]?7V1O7V=L;V)A;%]C
+M=&]R<P!?7U]D;U]G;&]B86Q?9'1O<G, 7U]E>&ET7V1U;6UY7W)E9@      
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+M                                                            
+(            
+ 
+end
diff --git a/gdb/testsuite/gdb.base/sparc-elf.u b/gdb/testsuite/gdb.base/sparc-elf.u
new file mode 100644
index 0000000..9320c0f
--- /dev/null
+++ b/gdb/testsuite/gdb.base/sparc-elf.u
@@ -0,0 +1,336 @@
+begin 777 sparc-elf
+M?T5,1@$" 0             "  (    !  $/%    #0  #;0       T "  
+M!0 H !< $P    8    T  $ -         "@    H     4          P  
+M -0              !$         !          !    -  ! #0        3
+M=   $W0    %  $       $  !.H  (3J         #L   "M     <  0  
+M     @  % P  A0,         (@         !P     O=7-R+VQI8B]L9"YS
+M;RXQ         %,   !H    2P              .@   &(    W    5   
+M            4P   %\   !D    4    $    !*    5P   #8         
+M20   #,    M    /P   %X              "4    <    0P        !1
+M    *         !"         "0   !;    ,    #$    R    1P   $4 
+M  !.    8          C    +@   %@         /0              (   
+M $0   !<    2               +         !/              !6    
+M     &<   !:    60   &8         .P                   %T     
+M    +P        !E              !A                            
+M                                                            
+M                                                            
+M                                                (0          
+M                                    *@   "D                 
+M   9                                    'P                  
+M "8    ;         !T              !H    ^    00   "L    U    
+M           7                         "(              $P     
+M         $8    X    4@   #0   !-         #P                 
+M   G         %4              !@    >               Y    8P  
+M                          $ U      #   !       ! .@      P  
+M @       0/<      ,   ,       $*7      #   $       !#M@     
+M P  !0       0[D      ,   8       $/"      #   '       !#Q0 
+M     P  "        1-P      ,   D       $3@      #   *       "
+M$Z@      P  "P       A0       ,   P       (4#      #   -    
+M   "%)@      P  #@                ,   \                #   0
+M                 P  $0                ,  !(                #
+M   3                 P  %                 ,  !4             
+M   #   6     0 "%)@    ($0  #@    D  1-P     !(   D    /  (4
+MH     01   .    %@ "%*@   "0$0  #@   !T  A4X    !!$   X    T
+M  (5/     01   .    .@ "%4     !$0  #@   $@  A5$    !!$   X 
+M  !6  (52     @1   .    7P "%5     ($0  #@   '4  A58    "!$ 
+M  X   "*  (58     01   .    GP "%60    $$0  #@   *<  A5H    
+M!!$   X   "T  $09    !02   (    R0 !#X@    4$@  "    -4  A5P
+M    "!$   X   #>  (5>     01   .    Z  "%7P    "$0  #@   /X 
+M A5^     A$   X   $/  (5@     @1   .   !(P !#P@     $@  !P  
+M 2D  A6(     A$   X   $X  $/Q    !02   (   !10 "%8P    $$0  
+M#@   4T  A60     A$   X   %:  (5F    !@1   .   !9  "%;     8
+M$0  #@   6X  A7(    !!$   X   %U  (5S     01   .   !A  "%=  
+M   $$0  #@   9P  1!0    %!(   @   &O  (5U     01   .   !Q@ "
+M%=@    "$0  #@   <X  0_L    %!(   @   'D  (4#      1 /_Q   !
+M[0 !$*@   +($@  "    ?(  1.     !!$   H   '_  $0D    !@2   (
+M   "#0 "%=H    "$0  #@   B$  1 4    %!(   @   (S  (5W     01
+M   .   "0P "%>     $$0  #@   E(  A7H    $!$   X   )A  $/%   
+M '02   (   ":  "%)0     $0#_\0   F\  1 H    %!(   @   *#  (5
+M^     @1   .   "CP "%@     $$0  #@   I<  1!X    &!(   @   *D
+M  $0/    !02   (   "L  "%@0    ($0  #@   L,  A90    !"$   X 
+M  ++  (6#     01   .   "W  "%A     $$0  #@   O(  0_8    %!( 
+M  @   ,&  (6%     01   .   #%0 "%A@    $$0  #@   RT  0^P    
+M%!(   @   -"  (67      1 /_Q   #1P "%AP    $$0  #@   UX  A8@
+M    !!$   X   -L  (6)     $1   .   #?  "%B@    $$0  #@   XP 
+M A8L    !!$   X   .<  $3J      1 /_Q   #HP "%C     ($0  #@  
+M [$  A8X    !!$   X   /&  (4       1 /_Q   #W  !$      4$@  
+M"    ^<  0^<    %!(   @   /Z  (6/     01   .   $"  "%D     !
+M$0  #@  ! \  A9$    !!$   X   0:  (62     @1   .   $)P "$^0 
+M   0$@      !"P  A/8    6!(       0S  (3\     @2       $.0 "
+M%E     $$0  #@  !$(  A94    !!$   X   1;  (66     01   . '9?
+M=6YI;VX 7V9I;FD <U]L:6YK '5?;&EN:P!V7W-I9VYE9%]S:&]R=%]P;VEN
+M=&5R '9?:6YT '9?<VEG;F5D7V-H87( =E]I;G1?<&]I;G1E<@!V7V1O=6)L
+M90!V7W5N<VEG;F5D7VQO;F=?87)R87D =E]U;G-I9VYE9%]I;G1?87)R87D 
+M=E]S:6=N961?:6YT7W!O:6YT97( 8VQU;FME<@!V7W-I9VYE9%]I;G0 =E]U
+M;G-I9VYE9%]L;VYG7V9U;F, =E]C:&%R7V9U;F, =E]U;FEO;C( <W!O<G1S
+M8V%R '9?=6YS:6=N961?8VAA<E]A<G)A>0!V7W5N<VEG;F5D7W-H;W)T '9?
+M<VEG;F5D7VQO;F=?87)R87D 7VEN:70 =E]S:6=N961?<VAO<G0 =E]S:&]R
+M=%]F=6YC '9?9FQO870 =E]C:&%R7V%R<F%Y '9?<W1R=6-T,0!V7W-T<G5C
+M=#( =E]L;VYG '9?;&]N9U]P;VEN=&5R '9?=6YS:6=N961?;&]N9U]P;VEN
+M=&5R '9?<VEG;F5D7VQO;F=?9G5N8P!V7W5N<VEG;F5D7VEN=%]P;VEN=&5R
+M '9?<VAO<G0 =E]U;G-I9VYE9%]S:&]R=%]F=6YC %]$64Y!34E# &UA:6X 
+M7VQI8E]V97)S:6]N '9?9&]U8FQE7V9U;F, =E]S:6=N961?8VAA<E]A<G)A
+M>0!V7W-I9VYE9%]I;G1?9G5N8P!V7W5N<VEG;F5D7VQO;F< =E]U;G-I9VYE
+M9%]I;G0 =E]D;W5B;&5?87)R87D 7W-T87)T %]E9&%T80!V7W5N<VEG;F5D
+M7VEN=%]F=6YC '9?:6YT7V%R<F%Y '!R:6UA<GD =E]F;&]A=%]F=6YC '9?
+M;&]N9U]F=6YC '9?<VEG;F5D7VEN=%]A<G)A>0!E;G9I<F]N '9?9&]U8FQE
+M7W!O:6YT97( =E]S:6=N961?8VAA<E]P;VEN=&5R '9?<VEG;F5D7W-H;W)T
+M7V9U;F, =E]C:&%R7W!O:6YT97( =E]U;G-I9VYE9%]C:&%R7W!O:6YT97( 
+M=E]U;G-I9VYE9%]C:&%R7V9U;F, 7V5N9 !V7W5N<VEG;F5D7W-H;W)T7V%R
+M<F%Y '9?<VEG;F5D7VQO;F< =E]U;G-I9VYE9%]C:&%R '9?<VAO<G1?<&]I
+M;G1E<@!V7V9L;V%T7W!O:6YT97( 7V5T97AT '9?9FQO871?87)R87D =E]S
+M:6=N961?<VAO<G1?87)R87D 7T=,3T)!3%]/1D93151?5$%"3$5? '9?:6YT
+M7V9U;F, =E]S:6=N961?8VAA<E]F=6YC '9?<VAO<G1?87)R87D =E]C:&%R
+M &YO;G!R:6UA<GD =E]L;VYG7V%R<F%Y &5X:70 871E>&ET %]E>&ET %]E
+M;G9I<F]N '9?=6YS:6=N961?<VAO<G1?<&]I;G1E<@!V7W-I9VYE9%]L;VYG
+M7W!O:6YT97( ;&EB8RYS;RXQ     A90  !E$P       A/8  !C%0      
+M A/D  !B%0       A/P  !D%0    "=X[^@@<?@"('H  "\$"  X .@0*(#
+MH$2<(Z @@)   0*   20$  !0 !!*@$    1  !$D!(C<$  028!    ?___
+M\ $   "0$  0DA  $94L( *4 J $E 1 "A<  (66$N)0U"+  $   $X!    
+M0 !!&P$   !  $$< 0   )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P
+M@  !@<?@"('H  "=X[^0L! @ #"   &!Q^ (@>@  )WCOY"P$"  ,(   8''
+MX B!Z   G>._D+ 0(  P@  !@<?@"('H  "=X[^0L! @ #"   &!Q^ (@>@ 
+M )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P@  !@<?@"('H  "=X[^0
+ML! @ #"   &!Q^ (@>@  )WCOY"P$"  ,(   8''X B!Z   G>._D+ 0(  P
+M@  !@<?@"('H  "=X[^0L! @ #"   &!Q^ (@>@  )WCOY 1  !$P0(CB#" 
+M  &!Q^ (@>@  )WCOY 1  !$P1HCD#"   &!Q^ (@>@  )WCOY 1  "%P"HB
+M0!$  (62$" !TBHA0!$  (62$" "TBHB)!$  (62$" #TC(AV!$  (62$" $
+MTC(AB!$  (62$" %TC(A?A$  (62$" &TB(A/!$  (62$" 'TB(A:!$  (62
+M$" (TB(AX!$  (62$" )TB(AR!$  (62$" *TB(B(!$  (62$" +TB(AW!$ 
+M (43  !$U )CF-0B(8P1  "%$P  1-0:8Z#4.B%($0  A1,  (74"F) U"HA
+MD!$  (43  "%U IA0-0J(=H1  "%$P  A=0*8B34*B%\$0  A1,  (74$F'8
+MU#(B/!$  (43  "%U!)AB-0R(C@1  "%$P  A=0287[4,B(<$0  A1,  (74
+M F$\U"(A^!$  (43  "%U )A:-0B(@01  "%$P  A=0"8>#4(B%8$0  A1, 
+M (74 F'(U"(B2!$  (43  "%U )B(-0B(8 1  "%$P  A=0"8=S4(B%0$0  
+MA1,  (74 F&,U"(B,!$  (43  "%U!IA2-0Z(>@1  "%%0  A9(2HD#2(B(4
+M$0  A14  (62$J% TB(B$!$  (45  "%DA*B)-(B(A@1  "%%0  A9(2H=C2
+M(B(H$0  A14  (62$J&(TB(A.!$  (45  "%DA*A?M(B(E01  "%%0  A9(2
+MH3S2(B%$$0  A14  (62$J%HTB(A8!$  (45  "%DA*AX-(B(=01  "%%0  
+MA9(2H<C2(B',$0  A14  (62$J(@TB(B6!$  (45  "%DA*AW-(B(= 1  "%
+M%0  A9(2H8S2(B(L$0  A14  (62$J%(TB(B#!$  (62$" "TB(B !$  (62
+M$" "TB(B1!$  (62$" !TB(A>!$  (62$" !TB(A9!$  (43  "%U )@H-0B
+M(*@1  "%$P  A=028)C4,B%P@<?@"('H  "=X[^@@<?@"('H            
+M 0                          0L@       ! :0                  
+M                                                      ,  # P
+MO__S 0    ,  #PPO__P 0    ,  $@PO__M 0    $      A0,        
+M       !   $<0    P  0\(    #0 !$W     $  $ Z     4  0I<    
+M!@ ! ]P    *   $>P    L    0    %0         #  (3J     (    D
+M    %     <    7  $.Y     <  0[8    "    #     )    #       
+M                                   !           $ /_Q       !
+M -0      P   0       0#H      ,   (       $#W      #   #    
+M   !"EP      P  !        0[8      ,   4       $.Y      #   &
+M       !#P@      P  !P       0\4      ,   @       $3<      #
+M   )       !$X       P  "@       A.H      ,   L       (4    
+M   #   ,       "% P      P  #0       A28      ,   X         
+M       #   /                 P  $                 ,  !$     
+M           #   2                 P  $P                ,  !0 
+M               #   5                 P  %@    <           0 
+M__$    .           $ /_Q    &@          ! #_\0   "(         
+M  0 __$    I  (4F     @1   .    ,0 !$W      $@  "0   #<  A2@
+M    !!$   X    ^  (4J    ) 1   .    10 "%3@    $$0  #@   %P 
+M A4\    !!$   X   !B  (50     $1   .    <  "%40    $$0  #@  
+M 'X  A5(    "!$   X   "'  (54     @1   .    G0 "%5@    ($0  
+M#@   +(  A5@    !!$   X   #'  (59     01   .    SP "%6@    $
+M$0  #@   -P  1!D    %!(   @   #Q  $/B    !02   (    _0 "%7  
+M   ($0  #@   08  A5X    !!$   X   $0  (5?     (1   .   !)@ "
+M%7X    "$0  #@   3<  A6     "!$   X   %+  $/"      2   '   !
+M40 "%8@    "$0  #@   6   0_$    %!(   @   %M  (5C     01   .
+M   !=0 "%9     "$0  #@   8(  A68    &!$   X   &,  (5L    !@1
+M   .   !E@ "%<@    $$0  #@   9T  A7,    !!$   X   &L  (5T   
+M  01   .   !Q  !$%     4$@  "    =<  A74    !!$   X   'N  (5
+MV     (1   .   !]@ !#^P    4$@  "    @P  A0,     !$ __$   (5
+M  $0J    L@2   (   "&@ !$X     $$0  "@   B<  1"0    &!(   @ 
+M  (U  (5V@    (1   .   "20 !$!0    4$@  "    EL  A7<    !!$ 
+M  X   )K  (5X     01   .   ">@ "%>@    0$0  #@   HD  0\4    
+M=!(   @   *0  (4E      1 /_Q   "EP !$"@    4$@  "    JL  A7X
+M    "!$   X   *W  (6      01   .   "OP !$'@    8$@  "    LP 
+M 1 \    %!(   @   +8  (6!     @1   .   "ZP "%E     $(0  #@  
+M O,  A8,    !!$   X   ,$  (6$     01   .   #&@ !#]@    4$@  
+M"    RX  A84    !!$   X   ,]  (6&     01   .   #50 !#[     4
+M$@  "    VH  A9<     !$ __$   -O  (6'     01   .   #A@ "%B  
+M   $$0  #@   Y0  A8D     1$   X   .D  (6*     01   .   #M  "
+M%BP    $$0  #@   \0  1.H     !$ __$   /+  (6,     @1   .   #
+MV0 "%C@    $$0  #@   ^X  A0      !$ __$   0$  $0     !02   (
+M   $#P !#YP    4$@  "   !"(  A8\    !!$   X   0P  (60     $1
+M   .   $-P "%D0    $$0  #@  !$(  A9(    "!$   X   1/  (3Y   
+M ! 2       $5  "$]@   !8$@      !%L  A/P    "!(       1A  (6
+M4     01   .   $:@ "%E0    $$0  #@  !(,  A98    !!$   X 9V1B
+M;64 8W)T:2YS '9A;'5E<RU882YC &=D8FUE+F, 8W)T;BYS '9?=6YI;VX 
+M7V9I;FD <U]L:6YK '5?;&EN:P!V7W-I9VYE9%]S:&]R=%]P;VEN=&5R '9?
+M:6YT '9?<VEG;F5D7V-H87( =E]I;G1?<&]I;G1E<@!V7V1O=6)L90!V7W5N
+M<VEG;F5D7VQO;F=?87)R87D =E]U;G-I9VYE9%]I;G1?87)R87D =E]S:6=N
+M961?:6YT7W!O:6YT97( 8VQU;FME<@!V7W-I9VYE9%]I;G0 =E]U;G-I9VYE
+M9%]L;VYG7V9U;F, =E]C:&%R7V9U;F, =E]U;FEO;C( <W!O<G1S8V%R '9?
+M=6YS:6=N961?8VAA<E]A<G)A>0!V7W5N<VEG;F5D7W-H;W)T '9?<VEG;F5D
+M7VQO;F=?87)R87D 7VEN:70 =E]S:6=N961?<VAO<G0 =E]S:&]R=%]F=6YC
+M '9?9FQO870 =E]C:&%R7V%R<F%Y '9?<W1R=6-T,0!V7W-T<G5C=#( =E]L
+M;VYG '9?;&]N9U]P;VEN=&5R '9?=6YS:6=N961?;&]N9U]P;VEN=&5R '9?
+M<VEG;F5D7VQO;F=?9G5N8P!V7W5N<VEG;F5D7VEN=%]P;VEN=&5R '9?<VAO
+M<G0 =E]U;G-I9VYE9%]S:&]R=%]F=6YC %]$64Y!34E# &UA:6X 7VQI8E]V
+M97)S:6]N '9?9&]U8FQE7V9U;F, =E]S:6=N961?8VAA<E]A<G)A>0!V7W-I
+M9VYE9%]I;G1?9G5N8P!V7W5N<VEG;F5D7VQO;F< =E]U;G-I9VYE9%]I;G0 
+M=E]D;W5B;&5?87)R87D 7W-T87)T %]E9&%T80!V7W5N<VEG;F5D7VEN=%]F
+M=6YC '9?:6YT7V%R<F%Y '!R:6UA<GD =E]F;&]A=%]F=6YC '9?;&]N9U]F
+M=6YC '9?<VEG;F5D7VEN=%]A<G)A>0!E;G9I<F]N '9?9&]U8FQE7W!O:6YT
+M97( =E]S:6=N961?8VAA<E]P;VEN=&5R '9?<VEG;F5D7W-H;W)T7V9U;F, 
+M=E]C:&%R7W!O:6YT97( =E]U;G-I9VYE9%]C:&%R7W!O:6YT97( =E]U;G-I
+M9VYE9%]C:&%R7V9U;F, 7V5N9 !V7W5N<VEG;F5D7W-H;W)T7V%R<F%Y '9?
+M<VEG;F5D7VQO;F< =E]U;G-I9VYE9%]C:&%R '9?<VAO<G1?<&]I;G1E<@!V
+M7V9L;V%T7W!O:6YT97( 7V5T97AT '9?9FQO871?87)R87D =E]S:6=N961?
+M<VAO<G1?87)R87D 7T=,3T)!3%]/1D93151?5$%"3$5? '9?:6YT7V9U;F, 
+M=E]S:6=N961?8VAA<E]F=6YC '9?<VAO<G1?87)R87D =E]C:&%R &YO;G!R
+M:6UA<GD =E]L;VYG7V%R<F%Y &5X:70 871E>&ET %]E>&ET %]E;G9I<F]N
+M '9?=6YS:6=N961?<VAO<G1?<&]I;G1E<@!V7W-I9VYE9%]L;VYG7W!O:6YT
+M97(  '9A;'5E<RU882YC "]D:79E+W)E;&5A<V4O8BUS>7-I9FEX+W5S<B]S
+M<F,O;&EB+VQI8F,O '!O<G0O9V5N+W9A;'5E<RU882YC    6'0@.R!6/3(N
+M, !M86EN %]L:6)?=F5R<VEO;@ O=&UP "]U<W(O8V-S+VQI8B]V86QU97,M
+M6&$N;P  9V1B;64N8P O=&UP+P!G9&)M92YC &=C8S)?8V]M<&EL960N &EN
+M=#IT,3UR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W.P!C:&%R.G0R/7(R.S [
+M,3(W.P!L;VYG(&EN=#IT,SUR,3LM,C$T-S0X,S8T.#LR,30W-#@S-C0W.P!U
+M;G-I9VYE9"!I;G0Z=#0]<C$[,#LM,3L ;&]N9R!U;G-I9VYE9"!I;G0Z=#4]
+M<C$[,#LM,3L <VAO<G0@:6YT.G0V/7(Q.RTS,C<V.#LS,C<V-SL ;&]N9R!L
+M;VYG(&EN=#IT-SUR,3LP.RTQ.P!S:&]R="!U;G-I9VYE9"!I;G0Z=#@]<C$[
+M,#LV-34S-3L ;&]N9R!L;VYG('5N<VEG;F5D(&EN=#IT.3UR,3LP.RTQ.P!S
+M:6=N960@8VAA<CIT,3 ]<C$[+3$R.#LQ,C<[ '5N<VEG;F5D(&-H87(Z=#$Q
+M/7(Q.S [,C4U.P!F;&]A=#IT,3(]<C$[-#LP.P!D;W5B;&4Z=#$S/7(Q.S@[
+M,#L ;&]N9R!D;W5B;&4Z=#$T/7(Q.S@[,#L =F]I9#IT,34],34 =%]S=')U
+M8W0Z5#$V/7,R-'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z
+M-BPQ-BPQ-CMV7VEN=%]M96UB97(Z,2PS,BPS,CMV7VQO;F=?;65M8F5R.C,L
+M-C0L,S([=E]F;&]A=%]M96UB97(Z,3(L.38L,S([=E]D;W5B;&5?;65M8F5R
+M.C$S+#$R."PV-#L[ '1?=6YI;VXZ5#$W/74X=E]C:&%R7VUE;6)E<CHR+# L
+M.#MV7W-H;W)T7VUE;6)E<CHV+# L,38[=E]I;G1?;65M8F5R.C$L,"PS,CMV
+M7VQO;F=?;65M8F5R.C,L,"PS,CMV7V9L;V%T7VUE;6)E<CHQ,BPP+#,R.W9?
+M9&]U8FQE7VUE;6)E<CHQ,RPP+#8T.SL =E]C:&%R7V9U;F,Z1C( =E]S:6=N
+M961?8VAA<E]F=6YC.D8Q, !V7W5N<VEG;F5D7V-H87)?9G5N8SI&,3$ =E]S
+M:&]R=%]F=6YC.D8V '9?<VEG;F5D7W-H;W)T7V9U;F,Z1C8 =E]U;G-I9VYE
+M9%]S:&]R=%]F=6YC.D8X '9?:6YT7V9U;F,Z1C$ =E]S:6=N961?:6YT7V9U
+M;F,Z1C$ =E]U;G-I9VYE9%]I;G1?9G5N8SI&- !V7VQO;F=?9G5N8SI&,P!V
+M7W-I9VYE9%]L;VYG7V9U;F,Z1C, =E]U;G-I9VYE9%]L;VYG7V9U;F,Z1C4 
+M=E]F;&]A=%]F=6YC.D8Q,@!V7V1O=6)L95]F=6YC.D8Q,P!L:6YK.E0Q.#US
+M,34R;F5X=#HQ.3TJ,3@L,"PS,CML:6YK9G5N8SHR,#TJ,C$]9C$Y+#,R+#,R
+M.W-T=69F.C(R/6%R,3LP.S [,C,]87(Q.S [,3LR-#UA<C$[,#LR.S$V+#8T
+M+#$Q-3([.P!T=5]L:6YK.E0R-3UU,30T;F5X=#HQ.2PP+#,R.VQI;FMF=6YC
+M.C(P+# L,S([<W1U9F8Z,C(L,"PQ,34R.SL 8V]L;W)S.E0R-CUE>65L;&]W
+M.C L<'5R<&QE.C$L<&EN:SHR+#L 8V%R<SI4,C<]96)M=SHP+'!O<G-C:&4Z
+M,2P[ &)O;VQE86XZ=#(X/65&04Q313HP+%12544Z,2P[ &)V86QS.E0R.3UE
+M9F%L<V4Z,"QT<G5E.C$L.P!B;V]L96%N,CIT,CD ;6ES;W)D97)E9#I4,S ]
+M971W;SHR+&]N93HQ+'IE<F\Z,"QT:')E93HS+#L ;6%I;CI&,0!V7V-H87(Z
+M1S( =E]S:6=N961?8VAA<CI',3  =E]U;G-I9VYE9%]C:&%R.D<Q,0!V7W-H
+M;W)T.D<V '9?<VEG;F5D7W-H;W)T.D<V '9?=6YS:6=N961?<VAO<G0Z1S@ 
+M=E]I;G0Z1S$ =E]S:6=N961?:6YT.D<Q '9?=6YS:6=N961?:6YT.D<T '9?
+M;&]N9SI',P!V7W-I9VYE9%]L;VYG.D<S '9?=6YS:6=N961?;&]N9SI'-0!V
+M7V9L;V%T.D<Q,@!V7V1O=6)L93I',3, =E]C:&%R7V%R<F%Y.D<S,3UA<C$[
+M,#LQ.S( =E]S:6=N961?8VAA<E]A<G)A>3I',S(]87(Q.S [,3LQ, !V7W5N
+M<VEG;F5D7V-H87)?87)R87DZ1S,S/6%R,3LP.S$[,3$ =E]S:&]R=%]A<G)A
+M>3I',S0]87(Q.S [,3LV '9?<VEG;F5D7W-H;W)T7V%R<F%Y.D<S- !V7W5N
+M<VEG;F5D7W-H;W)T7V%R<F%Y.D<S-3UA<C$[,#LQ.S@ =E]I;G1?87)R87DZ
+M1S,V/6%R,3LP.S$[,0!V7W-I9VYE9%]I;G1?87)R87DZ1S,V '9?=6YS:6=N
+M961?:6YT7V%R<F%Y.D<S-SUA<C$[,#LQ.S0 =E]L;VYG7V%R<F%Y.D<S.#UA
+M<C$[,#LQ.S, =E]S:6=N961?;&]N9U]A<G)A>3I',S@ =E]U;G-I9VYE9%]L
+M;VYG7V%R<F%Y.D<S.3UA<C$[,#LQ.S4 =E]F;&]A=%]A<G)A>3I'-# ]87(Q
+M.S [,3LQ,@!V7V1O=6)L95]A<G)A>3I'-#$]87(Q.S [,3LQ,P!V7V-H87)?
+M<&]I;G1E<CI'-#(]*C( =E]S:6=N961?8VAA<E]P;VEN=&5R.D<T,STJ,3  
+M=E]U;G-I9VYE9%]C:&%R7W!O:6YT97(Z1S0T/2HQ,0!V7W-H;W)T7W!O:6YT
+M97(Z1S0U/2HV '9?<VEG;F5D7W-H;W)T7W!O:6YT97(Z1S0U '9?=6YS:6=N
+M961?<VAO<G1?<&]I;G1E<CI'-#8]*C@ =E]I;G1?<&]I;G1E<CI'-#<]*C$ 
+M=E]S:6=N961?:6YT7W!O:6YT97(Z1S0W '9?=6YS:6=N961?:6YT7W!O:6YT
+M97(Z1S0X/2HT '9?;&]N9U]P;VEN=&5R.D<T.3TJ,P!V7W-I9VYE9%]L;VYG
+M7W!O:6YT97(Z1S0Y '9?=6YS:6=N961?;&]N9U]P;VEN=&5R.D<U,#TJ-0!V
+M7V9L;V%T7W!O:6YT97(Z1S4Q/2HQ,@!V7V1O=6)L95]P;VEN=&5R.D<U,CTJ
+M,3, =E]S=')U8W0Q.D<Q-@!V7W-T<G5C=#(Z1S4S/7,R-'9?8VAA<E]M96UB
+M97(Z,BPP+#@[=E]S:&]R=%]M96UB97(Z-BPQ-BPQ-CMV7VEN=%]M96UB97(Z
+M,2PS,BPS,CMV7VQO;F=?;65M8F5R.C,L-C0L,S([=E]F;&]A=%]M96UB97(Z
+M,3(L.38L,S([=E]D;W5B;&5?;65M8F5R.C$S+#$R."PV-#L[ '9?=6YI;VXZ
+M1S$W '9?=6YI;VXR.D<U-#UU.'9?8VAA<E]M96UB97(Z,BPP+#@[=E]S:&]R
+M=%]M96UB97(Z-BPP+#$V.W9?:6YT7VUE;6)E<CHQ+# L,S([=E]L;VYG7VUE
+M;6)E<CHS+# L,S([=E]F;&]A=%]M96UB97(Z,3(L,"PS,CMV7V1O=6)L95]M
+M96UB97(Z,3,L,"PV-#L[ '-?;&EN:SI',3D =5]L:6YK.D<R-0!P<FEM87)Y
+M.D<U-3UE<F5D.C L9W)E96XZ,2QB;'5E.C(L.P!N;VYP<FEM87)Y.D<R-@!C
+M;'5N:V5R.D<U-CUE8VAE=GDZ,"QF;W)D.C$L.P!S<&]R='-C87(Z1S(W   N
+M:6YT97)P "YH87-H "YD>6YS>6T +F1Y;G-T<@ N<F5L82YB<W, +G)E;&$N
+M<&QT "YI;FET "YT97AT "YF:6YI "YR;V1A=&$ +G!L=  N9V]T "YD>6YA
+M;6EC "YB<W, +G-Y;71A8@ N<W1R=&%B "YS=&%B+FEN9&5X<W1R "YS=&%B
+M<W1R "YS:'-T<G1A8@ N8V]M;65N=  N<W1A8BYI;F1E>  N<W1A8@  87,Z
+M($,@1&5V96QO<&UE;G0@4V5T(" H0T13*2!34$%20V]M<&EL97)S(#(N," Q
+M."!-87D@,3DY,@H  &%S.B!#($1E=F5L;W!M96YT(%-E=" @*$-$4RD@4U!!
+M4D-O;7!I;&5R<R R+C @,3@@36%Y(#$Y.3(*  ! *",I4W5N3U,@-2XP(&9C
+M<RX@($IU;F4@,3DY,@  87,Z($,@1&5V96QO<&UE;G0@4V5T(" H0T13*2!3
+M4$%20V]M<&EL97)S(#(N," Q."!-87D@,3DY,@H 1T-#.B H1TY5*2!C>6=N
+M=7,M,BXP+C(  &%S.B!#($1E=F5L;W!M96YT(%-E=" @*$-$4RD@4U!!4D-O
+M;7!I;&5R<R R+C @,3@@36%Y(#$Y.3(* &QD.B H4T=5*2!3=6Y/4R]35E(T
+M("A,2RTQ+C I          $    '    B0    UD             #=D   #
+M         &LX             ' X             $X\    *A=6!@   %DJ
+M             %X@              $   "\   +#     ED      $/B   
+M  ]D      $/B    !<\             ":              $B         
+M     %J              (&              )J              +B     
+M         -:              /"              1*              36 
+M             5*              6Z              8"             
+M 9.              :N              ;>              E&         
+M     N,D      $/B     !$  !Y          !$  !Y    !     !$  !Y
+M    #    O(D      $/G     !$  !Z          !$  !Z    !     !$
+M  !Z    #    PDD      $/L     !$  ![          !$  ![    !   
+M  !$  ![    #    R(D      $/Q     !$  !]          !$  !]    
+M!     !$  !]    #    S(D      $/V     !$  !^          !$  !^
+M    !     !$  !^    #    TDD      $/[     !$  !_          !$
+M  !_    !     !$  !_    #    V(D      $0      !$  "!        
+M  !$  "!    !     !$  "!    #    W D      $0%     !$  ""    
+M      !$  ""    !     !$  ""    #    X4D      $0*     !$  "#
+M          !$  "#    !     !$  "#    #    YPD      $0/     !$
+M  "%          !$  "%    !     !$  "%    #    ZLD      $04   
+M  !$  "&          !$  "&    !     !$  "&    #    \$D      $0
+M9     !$  "'          !$  "'    !     !$  "'    #    ]DD    
+M  $0>     !$  ")          !$  ")    !     !$  ")    $    ^HD
+M      $0D     !$  "*          !$  "*    !     !$  "*    $   
+M _R             !&B             !*B             !,^         
+M    !.N             !0F             !26             !3*     
+M        !5\D      $0J     !$  "R          !$  "U    !     !$
+M  "V    #     !$  "W    &     !$  "Y    )     !$  "Z    ,   
+M  !$  "[    /     !$  "]    2     !$  "^    5     !$  "_    
+M8     !$  #!    ;     !$  #"    >     !$  ##    A     !$  #%
+M    D     !$  #&    H     !$  #)    L     !$  #*    P     !$
+M  #+    T     !$  #-    X     !$  #.    \     !$  #/   !    
+M  !$  #1   !$     !$  #2   !(     !$  #3   !,     !$  #5   !
+M0     !$  #6   !4     !$  #7   !8     !$  #9   !<     !$  #:
+M   !@     !$  #<   !D     !$  #=   !H     !$  #>   !L     !$
+M  #@   !P     !$  #A   !T     !$  #B   !X     !$  #D   !\   
+M  !$  #E   "      !$  #F   "$     !$  #H   "(     !$  #I   "
+M,     !$  #J   "0     !$  #L   "4     !$  #M   "8     !$  #O
+M   "<     !$  #P   "?     !$  #Q   "B     !$  #R   "E     !$
+M  #T   "H     !$  #V   "L     !$  #W   "P     !$  #W   "P   
+M!6<@            !7$@            !8,@            !9<@        
+M    !:(@            !;0@            !<@@            !=$@    
+M        !>$@            !?,@            !?T@            !@X@
+M            !B$@            !BT@            !CH@            
+M!E4@            !G@@            !IT@            !KD@        
+M    !M(@            !O<@            !Q$@            !R@@    
+M        !TL@            !V8@            !WX@            !Z(@
+M            ![\@            !]T@            !_,@            
+M"!$@            "#$@            "$@@            "&,@        
+M    "(,@            ")@@            "+$@            ",\@    
+M        ".4@            "/\@            "1X@            "38@
+M            "4\@            "5T@            "?@@            
+M"@0@            "I<@            "J(@            "JT@        
+M    "M$@            "N @            "OX@                    
+M                                               !     0    ( 
+M 0#4    U    !$               $         "0    4    "  $ Z   
+M .@   +T     P         $    !     \    +     @ ! ]P   /<   &
+M@     0    7    !    !     7     P    (  0I<   *7   !'L     
+M          $         'P    0    "  $.V   #M@    ,     P    X 
+M   $    #    "D    $     @ !#N0   [D    )     ,    +    !   
+M  P    S     0    8  0\(   /"     P               0         
+M.0    $    &  $/%   #Q0   1<               $         #\    !
+M    !@ !$W   !-P    #               !         !%     0    ( 
+M 1.    3@    "@               @         30    $    '  (3J   
+M$Z@   !8               $    !    %(    !     P "%    !0     
+M#               !     0   !7    !@    ,  A0,   4#    (@    $
+M          0    (    8     @    #  (4F   %)@   '$            
+M   (         &4    "             !28   &T    !     <    !   
+M !    !M     P             ;:   !)D               $         
+M=0    ,             ( $   ")               !         (0    #
+M             ""*   +#                0        "-     P      
+M       KE@   +(               $         EP    $             
+M+$@   %)               !         *     !             "V4    
+M8               !     P   "L     0             M]   "-P     
+,          0    ,
+ 
+end
diff --git a/gdb/testsuite/gdb.base/ss.h b/gdb/testsuite/gdb.base/ss.h
new file mode 100644
index 0000000..2a4c162
--- /dev/null
+++ b/gdb/testsuite/gdb.base/ss.h
@@ -0,0 +1,4 @@
+struct s {
+  int a;
+  int b;
+};
diff --git a/gdb/testsuite/gdb.base/step-test.c b/gdb/testsuite/gdb.base/step-test.c
new file mode 100644
index 0000000..7130725
--- /dev/null
+++ b/gdb/testsuite/gdb.base/step-test.c
@@ -0,0 +1,58 @@
+/* Test various kinds of stepping.
+*/
+int glob = 0;
+
+int callee() {
+    glob++;   
+}
+
+/* A structure which, we hope, will need to be passed using memcpy.  */
+struct rhomboidal {
+  int rather_large[100];
+};
+
+void
+large_struct_by_value (struct rhomboidal r)
+{
+  glob += r.rather_large[42]; /* step-test.exp: arrive here 1 */
+}
+
+int main () {
+   int w,x,y,z;
+   int a[10], b[10];
+
+   /* Test "next" and "step" */
+   w = 0;
+   x = 1;
+   y = 2;
+   z = 3;
+   w = w + 2;
+   x = x + 3;
+   y = y + 4;
+   z = z + 5;
+
+   /* Test that "next" goes over a call */
+   callee(); /* OVER */
+
+   /* Test that "step" doesn't */
+   callee(); /* INTO */
+
+   /* Test "stepi" */
+   a[5] = a[3] - a[4];
+   callee(); /* STEPI */
+   
+   /* Test "nexti" */
+   callee(); /* NEXTI */
+
+   y = w + z;
+
+   {
+     struct rhomboidal r;
+     memset (r.rather_large, 0, sizeof (r.rather_large));
+     r.rather_large[42] = 10;
+     large_struct_by_value (r);  /* step-test.exp: large struct by value */
+   }
+
+   exit (0);
+}
+
diff --git a/gdb/testsuite/gdb.base/step-test.exp b/gdb/testsuite/gdb.base/step-test.exp
new file mode 100644
index 0000000..415714d
--- /dev/null
+++ b/gdb/testsuite/gdb.base/step-test.exp
@@ -0,0 +1,153 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+# step-test.exp -- Expect script to test stepping in gdb
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set testfile step-test
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+remote_exec build "rm -f ${binfile}"
+if { [gdb_compile "${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+   fail "Can't run to main"
+   return 0
+}
+
+# Vanilla step/next
+#
+gdb_test "next" ".*${decimal}.*x = 1;.*" "next 1"
+gdb_test "step" ".*${decimal}.*y = 2;.*" "step 1"
+
+# With count
+#
+gdb_test "next 2" ".*${decimal}.*w = w.*2;.*" "next 2"
+gdb_test "step 3" ".*${decimal}.*z = z.*5;.*" "step 3"
+gdb_test "next" ".*${decimal}.*callee.*OVER.*" "next 3"
+
+# Step over call
+#
+gdb_test "next" ".*${decimal}.*callee.*INTO.*" "next over"
+
+# Step into call
+#
+gdb_test "step" ".*${decimal}.*glob.*"   "step into"
+
+# Step out of call
+#
+# I wonder if this is really portable.  Are there any caller-saves
+# platforms, on which `finish' will return you to some kind of pop
+# instruction, which is attributed to the line containing the function
+# call?
+gdb_test "finish" ".*${decimal}.*a.*5.*= a.*3.*" "step out"
+
+### Testing nexti and stepi.
+###
+### test_i NAME COMMAND HERE THERE
+###
+### Send COMMAND to gdb over and over, while the output matches the
+### regexp HERE, followed by the gdb prompt.  Pass if the output
+### eventually matches the regexp THERE, followed by the gdb prompt;
+### fail if we have to iterate more than a hundred times, we time out
+### talking to gdb, or we get output which is neither HERE nor THERE.  :)
+###
+### Use NAME as the name of the test.
+###
+### The exact regexps used are "$HERE.*$gdb_prompt $"
+###                        and "$THERE.*$gdb_prompt $"
+### 
+proc test_i {name command here there} {
+    global gdb_prompt
+    
+    set i 0
+    while 1 {
+	send_gdb "${command}\n"
+	gdb_expect {
+	    -re "$here.*$gdb_prompt $" {
+		# Okay, we're still on the same line.  Just step again.
+	    }
+	    -re "$there.*$gdb_prompt $" {
+		# We've reached the next line.  Rah.
+		pass "$name"
+		return
+	    }
+	    -re "$gdb_prompt $" {
+		# We got something else.  Fail.
+		fail "$name"
+		return
+	    }
+	    timeout {
+		fail "$name (timeout)"
+		return
+	    }
+	}
+
+	# Have we gone for too many steps without seeing any progress?
+	if {[incr i] >= 100} {
+	    fail "$name (no progress after 100 steps)"
+	    return
+	}
+    }
+}
+
+test_i "stepi to next line" "stepi" \
+       ".*${decimal}.*a.*5.* = a.*3" \
+       ".*${decimal}.*callee.*STEPI"
+test_i "stepi into function" "stepi" \
+       ".*${decimal}.*callee.*STEPI" \
+       ".*callee \\(\\) at .*step-test\\.c"
+gdb_test "finish"  ".*${decimal}.*callee.*NEXTI.*" "stepi: finish call"
+test_i "nexti over function" "nexti" \
+       ".*${decimal}.*callee.*NEXTI" \
+       ".*${decimal}.*y = w \\+ z;"
+
+# On some platforms, if we try to step into a function call that
+# passes a large structure by value, then we actually end up stepping
+# into memcpy, bcopy, or some such --- GCC emits the call to pass the
+# argument.  Opinion is bitterly divided about whether this is the
+# right behavior for GDB or not, but we'll catch it here, so folks
+# won't forget about it.
+
+send_gdb "break [gdb_get_line_number "step-test.exp: large struct by value"]\n"
+gdb_test "continue" \
+         ".*Breakpoint ${decimal},.*large_struct_by_value.*" \
+	 "run to pass large struct"
+gdb_test "step" \
+         ".*step-test.exp: arrive here 1.*" \
+         "large struct by value"
+
+gdb_test "continue" ".*Program exited normally.*" "run to finish"
+
+return 0
diff --git a/gdb/testsuite/gdb.base/structs2.c b/gdb/testsuite/gdb.base/structs2.c
new file mode 100644
index 0000000..f9f59e9
--- /dev/null
+++ b/gdb/testsuite/gdb.base/structs2.c
@@ -0,0 +1,38 @@
+/* pr 13536 */
+
+static void param_reg (register char pr_char,
+		       register unsigned char pr_uchar,
+		       register short pr_short,
+		       register unsigned short pr_ushort);
+
+int bkpt;
+
+int
+main ()
+{
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+
+  bkpt = 0;
+  param_reg (120, 130, 32000, 33000);
+  param_reg (130, 120, 33000, 32000);
+
+  return 0;
+}
+
+static void dummy () {}
+
+static void
+param_reg(register char pr_char,
+	  register unsigned char pr_uchar,
+	  register short pr_short,
+	  register unsigned short pr_ushort)
+{
+  bkpt = 1;
+  dummy ();
+  pr_char = 1;
+  pr_uchar = pr_short = pr_ushort = 1;
+  dummy ();
+}
diff --git a/gdb/testsuite/gdb.base/structs2.exp b/gdb/testsuite/gdb.base/structs2.exp
new file mode 100644
index 0000000..14652be
--- /dev/null
+++ b/gdb/testsuite/gdb.base/structs2.exp
@@ -0,0 +1,79 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set prototypes 1
+set testfile "structs2"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+    # built the second test case since we can't use prototypes
+    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+    if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DNO_PROTOTYPES}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    set prototypes 0
+}
+
+# Start with a fresh gdb.
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set width 0" "" ""
+
+if { ![runto_main] } then {
+    gdb_suppress_tests
+}
+
+# Ok, we're finally ready to actually do our tests.
+
+set prms_id 13536
+set bug_id 0
+
+gdb_test "f" \
+    ".*bkpt = 0.*" \
+    "structs2 sanity check"
+
+gdb_test "break param_reg" \
+    "Breakpoint .* at .*" \
+    "structs2 breakpoint set"
+
+gdb_test "continue" \
+    ".*pr_char=120.*pr_uchar=130.*pr_short=32000.*pr_ushort=33000.*bkpt = 1.*" \
+    "structs2 continue1"
+
+gdb_test "continue" \
+    ".*pr_char=-126.*pr_uchar=120.*pr_short=-32536.*pr_ushort=32000.*bkpt = 1.*" \
+    "structs2 continue2"
+
+# End of tests.
+
+gdb_stop_suppressing_tests
+
+return 0
diff --git a/gdb/testsuite/gdb.base/term.exp b/gdb/testsuite/gdb.base/term.exp
new file mode 100644
index 0000000..211a94c
--- /dev/null
+++ b/gdb/testsuite/gdb.base/term.exp
@@ -0,0 +1,73 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+# This only works for native, I think.
+if ![isnative] then {
+    continue
+}
+
+gdb_start
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "run"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+delete_breakpoints
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set print sevenbit-strings" "" "test set print sevenbit-strings"
+gdb_test "set print address off" "" "test set print address off"
+gdb_test "set width 0" "" "test set width 0"
+gdb_test "info terminal" "No saved terminal information.*" "test info terminal"
+gdb_run_cmd 5
+gdb_expect {
+    -re ".*120.*Program exited normally.*$gdb_prompt $" {
+	gdb_test "info terminal" "No saved terminal information.*" "test info terminal #2"
+    }
+    default {
+	fail "term.exp, factorial didn't run to completion for info terminal"
+    }
+}
+
+# In mid-execution
+gdb_breakpoint main
+gdb_run_cmd 5
+gdb_expect {
+    -re ".*Breakpoint \[0-9\]+,.*main.*if .argc != 2.*$gdb_prompt $" {
+	gdb_test "info terminal" "Inferior's terminal status .currently saved by GDB.:.*" "info terminal at breakpoint"
+    }
+    -re ".*$gdb_prompt $"	{ fail "info terminal at breakpoint" }
+    timeout		{ fail "(timeout) info terminal at breakpoint" }
+}
diff --git a/gdb/testsuite/gdb.base/twice.c b/gdb/testsuite/gdb.base/twice.c
new file mode 100644
index 0000000..c50a2b3
--- /dev/null
+++ b/gdb/testsuite/gdb.base/twice.c
@@ -0,0 +1,19 @@
+int nothing ()
+
+{
+    int x = 3 ;
+    return x ;
+}
+
+
+main ()
+
+{
+    int y ;
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif    
+    y = nothing () ;
+    printf ("hello\n") ;
+}
diff --git a/gdb/testsuite/gdb.base/twice.exp b/gdb/testsuite/gdb.base/twice.exp
new file mode 100644
index 0000000..8d8c403
--- /dev/null
+++ b/gdb/testsuite/gdb.base/twice.exp
@@ -0,0 +1,63 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile twice-tmp
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+set options debug
+lappend options "additional_flags=-I."
+
+set fileid [open ${objdir}/${subdir}/${srcfile} w];
+puts $fileid "#include \"twice.c\"";
+close $fileid;
+
+remote_download host ${srcdir}/${subdir}/twice.c twice.c
+
+if  { [gdb_compile "${objdir}/${subdir}/${srcfile}" "${binfile}" executable $options] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+if [runto_main] then {
+    # Test that GDB can still detect whether we have line numbers
+    # even if we're executing code in an include file.
+
+    # The bug was fixed by
+    #Tue Jun 29 11:02:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
+    #
+    #	* infrun.c (wait_for_inferior): Use find_pc_line not
+    #	find_pc_symtab to check whether there is line number
+    #	information.
+
+    gdb_test "step" "nothing \\(\\) at.*"
+}
+return 0
diff --git a/gdb/testsuite/gdb.base/varargs.c b/gdb/testsuite/gdb.base/varargs.c
new file mode 100644
index 0000000..729d7df
--- /dev/null
+++ b/gdb/testsuite/gdb.base/varargs.c
@@ -0,0 +1,108 @@
+/* varargs.c - 
+ * (Added as part of fix for bug 15306 - "call" to varargs functions fails)
+ * This program is intended to let me try out "call" to varargs functions
+ * with varying numbers of declared args and various argument types.
+ * - RT 9/27/95
+ */
+
+#include <stdio.h>
+#include <stdarg.h>
+
+int find_max1(int, ...);
+int find_max2(int, int, ...);
+double find_max_double(int, double, ...);
+
+char ch;
+unsigned char uc;
+short s;
+unsigned short us;
+int a,b,c,d;
+int max_val;
+float fa,fb,fc,fd;
+double da,db,dc,dd;
+double dmax_val;
+
+main() {
+  c = -1;
+  uc = 1;
+  s = -2;
+  us = 2;
+  a = 1;
+  b = 60;
+  max_val = find_max1(1, 60);
+  max_val = find_max1(a, b);
+  a = 3;
+  b = 1;
+  c = 4;
+  d = 2;
+  max_val = find_max1(3, 1, 4, 2);
+  max_val = find_max2(a, b, c, d);
+  da = 3.0;
+  db = 1.0;
+  dc = 4.0;
+  dd = 2.0;
+  dmax_val = find_max_double(3, 1.0, 4.0, 2.0);
+  dmax_val = find_max_double(a, db, dc, dd);
+}
+
+/* Integer varargs, 1 declared arg */
+
+int find_max1(int num_vals, ...) {
+  int max_val = 0;
+  int x;
+  int i;
+  va_list argp;
+  va_start(argp, num_vals);
+  printf("find_max(%d,", num_vals);
+  for (i = 0; i < num_vals; i++) {
+    x = va_arg(argp, int);
+    if (max_val < x) max_val = x;
+    if (i < num_vals - 1)
+      printf(" %d,", x);
+    else
+      printf(" %d)", x);
+  }
+  printf(" returns %d\n", max_val);
+  return max_val;
+}
+
+/* Integer varargs, 2 declared args */
+
+int find_max2(int num_vals, int first_val, ...) {
+  int max_val = 0;
+  int x;
+  int i;
+  va_list argp;
+  va_start(argp, first_val);
+  x = first_val;
+  if (max_val < x) max_val = x;
+  printf("find_max(%d, %d", num_vals, first_val);
+  for (i = 1; i < num_vals; i++) {
+    x = va_arg(argp, int);
+    if (max_val < x) max_val = x;
+    printf(", %d", x);
+  }
+  printf(") returns %d\n", max_val);
+  return max_val;
+}
+
+/* Double-float varargs, 2 declared args */
+
+double find_max_double(int num_vals, double first_val, ...) {
+  double max_val = 0;
+  double x;
+  int i;
+  va_list argp;
+  va_start(argp, first_val);
+  x = first_val;
+  if (max_val < x) max_val = x;
+  printf("find_max(%f, %f", num_vals, first_val);
+  for (i = 1; i < num_vals; i++) {
+    x = va_arg(argp, double);
+    if (max_val < x) max_val = x;
+    printf(", %f", x);
+  }
+  printf(") returns %f\n", max_val);
+  return max_val;
+}
+
diff --git a/gdb/testsuite/gdb.base/varargs.exp b/gdb/testsuite/gdb.base/varargs.exp
new file mode 100644
index 0000000..e6548b2
--- /dev/null
+++ b/gdb/testsuite/gdb.base/varargs.exp
@@ -0,0 +1,139 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+
+# this file tests command line calls with functions having variable
+# args list
+# corresponding source file: varargs.c
+
+#print find_max1(5,1,2,3,4,5)
+#print find_max1(1,3)
+#call find_max1(10,1,2,3,4,5,6,7,8,29,0)
+#print find_max2(3,1,2,3)
+#print find_max_double(5,1.0,17.0,2.0,3.0,4.0)
+#quit
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set prototypes 0
+set testfile "varargs"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+if {$gcc_compiled == 0} {
+    if [istarget "hppa*-hp-hpux*"] then {
+	set additional_flags "additional_flags=-Ae"
+    } else {
+	# don't know what the compiler is, hope for the best, maybe it's ANSI...
+	set additional_flags ""
+    }
+} else {
+    set additional_flags ""
+}
+
+# build the first test case
+#if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [list debug $additional_flags]] != "" } {
+#     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
+send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+
+send_gdb "print find_max1(5,1,2,3,4,5)\n"
+gdb_expect {
+    -re ".*find_max\\(5, 1, 2, 3, 4, 5\\) returns 5\[ \r\n\]+.\[0-9\]+ = 5.*$gdb_prompt $" {
+        pass "print find_max1(5,1,2,3,4,5)"
+      }
+    -re ".*$gdb_prompt $" { fail "print find_max1(5,1,2,3,4,5)" }
+    timeout           { fail "(timeout) print find_max1(5,1,2,3,4,5)" }
+  }
+
+
+
+
+send_gdb "print find_max1(1,3)\n"
+gdb_expect {
+    -re ".*find_max\\(1, 3\\) returns 3\[ \r\n\]+.\[0-9\]+ = 3.*$gdb_prompt $" {
+        pass "print find_max1(1,3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print find_max1(1,3)" }
+    timeout           { fail "(timeout) print find_max1(1,3)" }
+  }
+
+
+send_gdb "print find_max1(10,1,2,3,4,5,6,7,8,29,0)\n"
+gdb_expect {
+    -re ".*find_max\\(10, 1, 2, 3, 4, 5, 6, 7, 8, 29, 0\\) returns 29\[ \r\n\]+.\[0-9\]+ = 29.*$gdb_prompt $" {
+        pass "print find_max1(10,1,2,3,4,5,6,7,8,29,0)"
+      }
+    -re ".*$gdb_prompt $" { fail "print find_max1(10,1,2,3,4,5,6,7,8,29,0)" }
+    timeout           { fail "(timeout) print find_max1(10,1,2,3,4,5,6,7,8,29,0)" }
+  }
+
+
+
+send_gdb "print find_max2(3,1,2,3)\n"
+gdb_expect {
+    -re ".*find_max\\(3, 1, 2, 3\\) returns 3\[ \r\n\]+.\[0-9\]+ = 3.*$gdb_prompt $" {
+        pass "print find_max2(3,1,2,3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print find_max2(3,1,2,3)" }
+    timeout           { fail "(timeout) print find_max2(3,1,2,3)" }
+  }
+
+
+send_gdb "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)\n"
+gdb_expect {
+    -re ".*find_max\\(.*\\) returns 17\\.000000\[ \r\n\]+.\[0-9\]+ = 17.*$gdb_prompt $" {
+        pass "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)"
+      }
+    -re ".*$gdb_prompt $" { fail "print find_max_double(5,1.0,17.0,2.0,3.0,4.0)" }
+    timeout           { fail "(timeout) print find_max_double(5,1.0,17.0,2.0,3.0,4.0)" }
+  }
+
diff --git a/gdb/testsuite/gdb.base/volatile.exp b/gdb/testsuite/gdb.base/volatile.exp
new file mode 100644
index 0000000..a2a2b59
--- /dev/null
+++ b/gdb/testsuite/gdb.base/volatile.exp
@@ -0,0 +1,243 @@
+#   Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-07
+#    In the spirit of constvars.exp: added volatile, const-volatile stuff.
+
+# This file is part of the gdb testsuite
+# Tests for:
+#           volatile vars
+#           pointers to volatile vars
+#           const volatile vars
+#           pointers to const volatile vars
+#           const pointers to volatile vars
+#           volatile pointers to const vars
+#           const volatile pointers to const vars
+#           const volatile pointers to volatile vars
+#           ... etc.  (you get the idea)
+# Mostly with char and unsigned char.                    
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+# Use the same test program constvars.c.
+
+set testfile "constvars"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+remote_exec build "rm -f ${binfile}.ci"
+if  [get_compiler_info ${binfile}] {
+    return -1
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+source ${binfile}.ci
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "Break.* marker1__.* \\(\\) at .*:$decimal.*$gdb_prompt $" {
+	    fail "continue to marker1 (demangling)"
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+# As of Feb 1999, GCC does not issue info about volatility of vars, so
+# these tests are all expected to fail if GCC is the compiler. -sts
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vox" "type = volatile char"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype victuals" "type = volatile unsigned char"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vixen" "type = volatile short"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vitriol" "type = volatile unsigned short"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vellum" "type = volatile long"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype valve" "type = volatile unsigned long"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vacuity" "type = volatile float"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vertigo" "type = volatile double"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vampire" "type = volatile char *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype viper" "type = volatile unsigned char *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vigour" "type = volatile short *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vapour" "type = volatile unsigned short *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype ventricle" "type = volatile long *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vigintillion" "type = volatile unsigned long *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vocation" "type = volatile float *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype veracity" "type = volatile double *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vapidity" "type = volatile char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype velocity" "type = volatile unsigned char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype veneer" "type = volatile short * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype video" "type = volatile unsigned short * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vacuum" "type = volatile long * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype veniality" "type = volatile unsigned long * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vitality" "type = volatile float * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype voracity" "type = volatile double * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype victor" "type = const volatile char"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vicar" "type = const volatile unsigned char"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype victory" "type = const volatile char *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vicarage" "type = const volatile unsigned char *"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vein" "type = volatile char * const"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vogue" "type = volatile unsigned char * const"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype cavern" "type = const volatile char * const"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype coverlet" "type = const volatile unsigned char * const"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype caveat" "type = const char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype covenant" "type = const unsigned char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vizier" "type = const volatile char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vanadium" "type = const volatile unsigned char * volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vane" "type = char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype veldt" "type = unsigned char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype cove" "type = const char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype cavity" "type = const unsigned char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vagus" "type = volatile char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vagrancy" "type = volatile unsigned char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vagary" "type = const volatile char * const volatile"
+
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+gdb_test "ptype vendor" "type = const volatile unsigned char * const volatile"
+
+# test function parameters
+if {$gcc_compiled} then { setup_xfail "*-*-*" }
+send_gdb "ptype qux2\n"
+gdb_expect {
+    -re "type = int \\(volatile unsigned char, const volatile int, volatile short &, volatile long \\*, float \\* volatile, const volatile signed char \\* const volatile\\)" {
+        pass "ptype qux2"
+    }
+    -re ".*$gdb_prompt $" { fail "ptype qux2" }
+    timeout           { fail "(timeout) ptype qux2" }
+  }   
diff --git a/gdb/testsuite/gdb.base/watchpoint.c b/gdb/testsuite/gdb.base/watchpoint.c
new file mode 100644
index 0000000..bd54f3e
--- /dev/null
+++ b/gdb/testsuite/gdb.base/watchpoint.c
@@ -0,0 +1,124 @@
+#include <stdio.h>
+/*
+ *	Since using watchpoints can be very slow, we have to take some pains to
+ *	ensure that we don't run too long with them enabled or we run the risk
+ *	of having the test timeout.  To help avoid this, we insert some marker
+ *	functions in the execution stream so we can set breakpoints at known
+ *	locations, without worrying about invalidating line numbers by changing
+ *	this file.  We use null bodied functions are markers since gdb does
+ *	not support breakpoints at labeled text points at this time.
+ *
+ *	One place we need is a marker for when we start executing our tests
+ *	instructions rather than any process startup code, so we insert one
+ *	right after entering main().  Another is right before we finish, before
+ *	we start executing any process termination code.
+ *
+ *	Another problem we have to guard against, at least for the test
+ *	suite, is that we need to ensure that the line that causes the
+ *	watchpoint to be hit is still the current line when gdb notices
+ *	the hit.  Depending upon the specific code generated by the compiler,
+ *	the instruction after the one that triggers the hit may be part of
+ *	the same line or part of the next line.  Thus we ensure that there
+ *	are always some instructions to execute on the same line after the
+ *	code that should trigger the hit.
+ */
+
+int count = -1;
+int ival1 = -1;
+int ival2 = -1;
+int ival3 = -1;
+int ival4 = -1;
+char buf[10];
+struct foo
+{
+  int val;
+};
+struct foo struct1, struct2, *ptr1, *ptr2;
+
+int doread = 0;
+
+void marker1 ()
+{
+}
+
+void marker2 ()
+{
+}
+
+void marker4 ()
+{
+}
+
+void marker5 ()
+{
+}
+
+void
+func2 ()
+{
+}
+
+int
+func1 ()
+{
+  /* The point of this is that we will set a breakpoint at this call.
+
+     Then, if DECR_PC_AFTER_BREAK equals the size of a function call
+     instruction (true on a sun3 if this is gcc-compiled--FIXME we
+     should use asm() to make it work for any compiler, present or
+     future), then we will end up branching to the location just after
+     the breakpoint.  And we better not confuse that with hitting the
+     breakpoint.  */
+  func2 ();
+  return 73;
+}
+
+int main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  struct1.val = 1;
+  struct2.val = 2;
+  ptr1 = &struct1;
+  ptr2 = &struct2;
+  marker1 ();
+  func1 ();
+  for (count = 0; count < 4; count++) {
+    ival1 = count;
+    ival3 = count; ival4 = count;
+  }
+  ival1 = count; /* Outside loop */
+  ival2 = count;
+  ival3 = count; ival4 = count;
+  marker2 ();
+  if (doread)
+    {
+      static char msg[] = "type stuff for buf now:";
+      write (1, msg, sizeof (msg) - 1);
+      read (0, &buf[0], 5);
+    }
+  marker4 ();
+
+  /* We have a watchpoint on ptr1->val.  It should be triggered if
+     ptr1's value changes.  */
+  ptr1 = ptr2;
+
+  /* This should not trigger the watchpoint.  If it does, then we
+     used the wrong value chain to re-insert the watchpoints or we
+     are not evaluating the watchpoint expression correctly.  */
+  struct1.val = 5;
+  marker5 ();
+
+  /* We have a watchpoint on ptr1->val.  It should be triggered if
+     ptr1's value changes.  */
+  ptr1 = ptr2;
+
+  /* This should not trigger the watchpoint.  If it does, then we
+     used the wrong value chain to re-insert the watchpoints or we
+     are not evaluating the watchpoint expression correctly.  */
+  struct1.val = 5;
+  marker5 ();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/watchpoint.exp b/gdb/testsuite/gdb.base/watchpoint.exp
new file mode 100644
index 0000000..a295445
--- /dev/null
+++ b/gdb/testsuite/gdb.base/watchpoint.exp
@@ -0,0 +1,583 @@
+# Copyright (C) 1992, 1994, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "watchpoint"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# if we are on HPUX and we are not compiled with gcc, then skip these tests.
+
+if [istarget hppa*-*-hpux*] {
+    if {!$gcc_compiled} {
+	continue 
+    }
+}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Prepare for watchpoint tests by setting up two breakpoints and one
+# watchpoint.
+#
+# We use breakpoints at marker functions to get past all the startup code,
+# so we can get to the watchpoints in a reasonable amount of time from a
+# known starting point.
+#
+# For simplicity, so we always know how to reference specific breakpoints or
+# watchpoints by number, we expect a particular ordering and numbering of
+# each in the combined breakpoint/watchpoint table, as follows:
+#
+#	Number		What		Where
+#	1		Breakpoint	marker1()
+#	2		Breakpoint	marker2()
+#	3		Watchpoint	ival3
+
+proc initialize {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global srcfile
+
+    if [gdb_test "break marker1" "Breakpoint 1 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker1" ] { 
+      return 0; 
+    }
+
+
+    if [gdb_test "break marker2" "Breakpoint 2 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker2" ] { 
+      return 0; 
+    }
+
+
+    if [gdb_test "info break" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*" "info break in watchpoint.exp" ] { 
+      return 0; 
+    }
+
+
+    if [gdb_test "watch ival3" ".*\[Ww\]atchpoint 3: ival3" "set watchpoint on ival3" ] { 
+      return 0; 
+    }
+
+
+    # "info watch" is the same as "info break"
+
+    if [gdb_test "info watch" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3" "watchpoint found in watchpoint/breakpoint table" ] { 
+      return 0; 
+    }
+
+
+    # After installing the watchpoint, we disable it until we are ready
+    # to use it.  This allows the test program to run at full speed until
+    # we get to the first marker function.
+
+    if [gdb_test "disable 3" "disable 3\[\r\n\]+" "disable watchpoint" ] { 
+      return 0; 
+    }
+
+
+    return 1
+}
+
+#
+# Test simple watchpoint.
+#
+
+proc test_simple_watchpoint {} {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    # Ensure that the watchpoint is disabled when we startup.
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_simple_watchpoint" ] { 
+      return 0; 
+    }
+
+
+    # Run until we get to the first marker function.
+
+    gdb_run_cmd
+    set timeout 600
+    gdb_expect {
+	-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
+	    pass "run to marker1 in test_simple_watchpoint"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run to marker1 in test_simple_watchpoint"
+	    return
+	}
+	timeout {
+	    fail "run to marker1 in test_simple_watchpoint (timeout)"
+	    return
+	}
+    }
+
+    # After reaching the marker function, enable the watchpoint.
+
+    if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "enable watchpoint" ] { 
+      return ; 
+    }
+
+
+    gdb_test "break func1" "Breakpoint.*at.*"
+    gdb_test "set \$func1_breakpoint_number = \$bpnum" ""
+
+    gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, func1.*" \
+	"continue to breakpoint at func1"
+
+    # Continue until the first change, from -1 to 0
+
+    send_gdb "cont\n"
+    gdb_expect {
+	-re "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count; ival4 = count;.*$gdb_prompt $" {
+	    pass "watchpoint hit, first time"
+	}
+	-re "Continuing.*Breakpoint.*func1.*$gdb_prompt $" {
+	    setup_xfail "m68*-*-*" 2597
+	    fail "thought it hit breakpoint at func1 twice"
+	    gdb_test "delete \$func1_breakpoint_number" ""
+	    gdb_test "continue" "\
+Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count;" \
+		"watchpoint hit, first time"
+	}
+	-re ".*$gdb_prompt $" { fail "watchpoint hit, first time" ; return }
+	timeout { fail "watchpoint hit, first time (timeout)" ; return }
+	eof { fail "watchpoint hit, first time (eof)" ; return }
+    }
+
+    gdb_test "delete \$func1_breakpoint_number" ""
+
+    # Continue until the next change, from 0 to 1.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit, second time"
+
+    # Continue until the next change, from 1 to 2.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 1.*New value = 2.*ival3 = count; ival4 = count;.*" "watchpoint hit, third time"
+    
+    # Continue until the next change, from 2 to 3.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 2.*New value = 3.*ival3 = count; ival4 = count;.*" "watchpoint hit, fourth time"
+
+    # Continue until the next change, from 3 to 4.
+    # Note that this one is outside the loop.
+
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 3.*New value = 4.*ival3 = count; ival4 = count;.*" "watchpoint hit, fifth time"
+
+    # Continue until we hit the finishing marker function.
+    # Make sure we hit no more watchpoints.
+
+    gdb_test "cont" "Continuing.*Breakpoint.*marker2 \(\).*" \
+	"continue to marker2"
+
+    # Disable the watchpoint so we run at full speed until we exit.
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "watchpoint disabled" ] { 
+      return ; 
+    }
+
+
+    # Run until process exits.
+
+    if [target_info exists gdb,noresults] { return }
+
+    gdb_test "cont" "Continuing.*Program exited normally.*" \
+	"continue to exit in test_simple_watchpoint"
+}
+
+# Test disabling watchpoints.
+
+proc test_disabling_watchpoints {} {
+    global gdb_prompt
+    global binfile
+    global srcfile
+    global decimal
+    global hex
+
+    # Ensure that the watchpoint is disabled when we startup.
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_disabling_watchpoints" ] { 
+      return 0; 
+    }
+
+
+    # Run until we get to the first marker function.
+
+    gdb_run_cmd
+    set timeout 600
+    gdb_expect {
+	-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
+	    pass "run to marker1 in test_disabling_watchpoints"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run to marker1 in test_disabling_watchpoints"
+	    return
+	}
+	timeout {
+	    fail "run to marker1 in test_disabling_watchpoints (timeout)"
+	    return
+	}
+    }
+
+    # After reaching the marker function, enable the watchpoint.
+
+    if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "watchpoint enabled" ] { 
+      return ; 
+    }
+
+
+    # Continue until the first change, from -1 to 0
+    # Don't check the old value, because on VxWorks the variable value
+    # will not have been reinitialized.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = .*New value = 0.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, first time"
+    
+    # Continue until the next change, from 0 to 1.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, second time"
+    
+    # Disable the watchpoint but leave breakpoints
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint #2 in test_disabling_watchpoints" ] { 
+      return 0; 
+    }
+
+
+    # Check watchpoint list, looking for the entry that confirms the
+    # watchpoint is disabled.
+    gdb_test "info watchpoints" "3\[ \]*.*watchpoint\[ \]*keep\[ \]*n\[ \]*ival3\r\n.*" "watchpoint disabled in table"
+
+    # Continue until we hit the finishing marker function.
+    # Make sure we hit no more watchpoints.
+    gdb_test "cont" "Continuing.*Breakpoint.*marker2 \\(\\).*" \
+	"disabled watchpoint skipped"
+    
+    if [target_info exists gdb,noresults] { return }
+
+    gdb_test "cont" "Continuing.*Program exited normally.*" \
+	"continue to exit in test_disabling_watchpoints"
+}
+
+# Test stepping and other mundane operations with watchpoints enabled
+proc test_stepping {} {
+    global gdb_prompt
+
+    if [runto marker1] then {
+	gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2"
+
+	# Well, let's not be too mundane.  It should be a *bit* of a challenge
+	gdb_test "break func2 if 0" "Breakpoint.*at.*"
+	gdb_test "p \$func2_breakpoint_number = \$bpnum" " = .*"
+
+	# The HPPA has a problem here if it's not using hardware watchpoints
+	if {[ istarget "hppa*-*-*" ] && ![ istarget "hppa*-*-*bsd*" ]} then {
+	    # Don't actually try doing the call, if we do we can't continue.
+	    setup_xfail "*-*-*"
+	    fail "calling function with watchpoint enabled"
+	} else {
+	    # The problem is that GDB confuses stepping through the call
+	    # dummy with hitting the breakpoint at the end of the call dummy.
+	    # Will be fixed once all architectures define 
+	    # CALL_DUMMY_BREAKPOINT_OFFSET.
+	    setup_xfail "*-*-*"
+	    # This doesn't occur if the call dummy starts with a call,
+	    # because we are out of the dummy by the first time the inferior
+	    # stops.
+	    clear_xfail "d10v*-*-*"
+	    clear_xfail "m68*-*-*"
+	    clear_xfail "i*86*-*-*"
+	    clear_xfail "vax-*-*"
+	    # The following architectures define CALL_DUMMY_BREAKPOINT_OFFSET.
+	    clear_xfail "alpha-*-*"
+	    clear_xfail "mips*-*-*"
+	    clear_xfail "sparc-*-*"
+	    clear_xfail "hppa*-*-*bsd*"
+	    # It works with the generic inferior function calling code too.
+	    clear_xfail "mn10200*-*-*"
+	    clear_xfail "mn10300*-*-*"
+	    gdb_test "p func1 ()" "= 73" \
+		"calling function with watchpoint enabled"
+	}
+
+	# 
+	# "finish" brings us back to main.
+	# On some targets (e.g. alpha) gdb will stop from the finish in midline
+	# of the marker1 call. This is due to register restoring code on
+	# the alpha and might be caused by stack adjustment instructions
+	# on other targets. In this case we will step once more.
+	#
+
+	send_gdb "finish\n"
+	gdb_expect {
+	    -re "Run.*exit from.*marker1.* at" { }
+	    default { fail "finish from marker1" ; return }
+	}
+
+	gdb_expect {
+	    -re "marker1 \\(\\);.*$gdb_prompt $" {
+		send_gdb "step\n"
+		exp_continue
+	    }
+	    -re "func1 \\(\\);.*$gdb_prompt $" {
+		pass "finish from marker1"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "finish from marker1"
+	    }
+	    default { fail "finish from marker1" ; return }
+	}
+
+	gdb_test "next" "for \\(count = 0.*" "next to `for' in watchpoint.exp"
+
+	# Now test that "until" works.  It's a bit tricky to test
+	# "until", because compilers don't always arrange the code
+	# exactly the same way, and we might get slightly different
+	# sequences of statements.  But the following should be true
+	# (if not it is a compiler or a debugger bug): The user who
+	# does "until" at every statement of a loop should end up
+	# stepping through the loop once, and the debugger should not
+	# stop for any of the remaining iterations.
+
+	gdb_test "until" "ival1 = count.*" "until to ival1 assignment"
+	gdb_test "until" "ival3 = count.*" "until to ival3 assignment"
+	send_gdb "until\n"
+	gdb_expect {
+	    -re "(for \\(count = 0|\}).*$gdb_prompt $" {
+		gdb_test "until" "ival1 = count; /. Outside loop ./" \
+		    "until out of loop"
+	    }
+	    -re "ival1 = count; /. Outside loop ./.*$gdb_prompt $" {
+		pass "until out of loop"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "until out of loop"
+	    }
+	    default { fail "until out of loop" ; return }
+	}
+
+	gdb_test "step" "ival2 = count.*" "step to ival2 assignment"
+    }
+}
+
+# Test stepping and other mundane operations with watchpoints enabled
+proc test_watchpoint_triggered_in_syscall {} {
+    global gdb_prompt
+
+    if [target_info exists gdb,noinferiorio] {
+	verbose "Skipping test_watchpoint_triggered_in_syscall due to noinferiorio"
+	return
+    }
+    # Run until we get to the first marker function.
+    set x 0
+    set y 0
+    set testname "Watch buffer passed to read syscall"
+    if [runto marker2] then {
+	gdb_test "watch buf\[0\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[0\\\]"
+	gdb_test "watch buf\[1\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[1\\\]"
+	gdb_test "watch buf\[2\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[2\\\]"
+	gdb_test "watch buf\[3\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[3\\\]"
+	gdb_test "watch buf\[4\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[4\\\]"
+	gdb_test "break marker4" ".*Breakpoint.*"
+
+	gdb_test "set doread = 1" ""
+
+	# If we send_gdb "123\n" before gdb has switched the tty, then it goes
+	# to gdb, not the inferior, and we lose.  So that is why we have
+	# watchpoint.c prompt us, so we can wait for that prompt.
+	send_gdb "continue\n";
+	gdb_expect {
+	    -re "Continuing\\.\r\ntype stuff for buf now:" {
+		pass "continue to read"
+	    }
+	    default {
+		fail "continue to read";
+		return ;
+	    }
+	}
+
+	send_gdb "123\n"
+	gdb_expect {
+	    -re ".*\[Ww\]atchpoint.*buf\\\[0\\\].*Old value = 0.*New value = 49\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[1\\\].*Old value = 0.*New value = 50\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[2\\\].*Old value = 0.*New value = 51\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[3\\\].*Old value = 0.*New value = 10\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*$gdb_prompt $" { pass "sent 123" }
+	    timeout { fail "sent 123 (timeout)" }
+	}
+
+	# Examine the values in buf to see how many watchpoints we
+	# should have printed.
+	send_gdb "print buf\[0\]\n"
+	gdb_expect {
+	    -re ".*= 49.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[0\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[0\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[0\]"}
+	    default { fail "print buf\[0\]"}
+	}
+	send_gdb "print buf\[1\]\n"
+	gdb_expect {
+	    -re ".*= 50.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[1\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[1\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[1\]"}
+	    default { fail "print buf\[1\]"}
+	}
+	send_gdb "print buf\[2\]\n"
+	gdb_expect {
+	    -re ".*= 51.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[2\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[2\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[2\]"}
+	    default { fail "print buf\[2\]"}
+	}
+	send_gdb "print buf\[3\]\n"
+	gdb_expect {
+	    -re ".*= 10.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[3\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[3\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[3\]" }
+	    default { fail "print buf\[3\]" }
+	}
+
+	# Did we find what we were looking for?  If not, flunk it.
+	if [expr $x==$y] then { pass $testname } else { fail "$testname (only triggered $x watchpoints, expected $y)"}
+
+	# Continue until we hit the finishing marker function.
+	# Make sure we hit no more watchpoints.
+	gdb_test "cont" "Continuing.*Breakpoint.*marker4 \\(\\).*" \
+	    "continue to marker4"
+
+	# Disable everything so we can finish the program at full speed
+	gdb_test "disable" "" "disable in test_watchpoint_triggered_in_syscall"
+
+	if [target_info exists gdb,noresults] { return }
+
+	gdb_test "cont" "Continuing.*Program exited normally.*" \
+	    "continue to exit in test_watchpoint_triggered_in_syscall"
+    }
+}
+
+# Do a simple test of of watching through a pointer when the pointer
+# itself changes.  Should add some more complicated stuff here.
+
+proc test_complex_watchpoint {} {
+    global gdb_prompt
+
+    if [runto marker4] then {
+	gdb_test "watch ptr1->val" ".*\[Ww\]atchpoint \[0-9\]*: ptr1->val"
+	gdb_test "break marker5" ".*Breakpoint.*"
+
+	gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ptr1->val.*Old value = 1.*New value = 2.*" "Test complex watchpoint"
+
+	# Continue until we hit the marker5 function.
+	# Make sure we hit no more watchpoints.
+
+	gdb_test "cont" "Continuing.*Breakpoint.*marker5 \\(\\).*" \
+	    "did not trigger wrong watchpoint"
+
+	# Disable everything so we can finish the program at full speed
+	gdb_test "disable" "" "disable in test_complex_watchpoint"
+
+	if [target_info exists gdb,noresults] { return }
+
+
+	gdb_test "cont" "Continuing.*Program exited normally.*" \
+	    "continue to exit in test_complex_watchpoint"
+    }
+}
+
+# Start with a fresh gdb.
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+set timeout 600	
+verbose "Timeout now 600 sec.\n"
+
+if [initialize] then {
+
+    test_simple_watchpoint
+
+    # The IDT/sim monitor only has 8 (!) open files, of which it uses
+    # 4 (!).  So we have to make sure one program exits before
+    # starting another one.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    test_disabling_watchpoints
+
+    # See above.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    if ![target_info exists gdb,cannot_call_functions] {
+	test_stepping
+
+	# See above.
+	if [istarget "mips-idt-*"] then {
+	    gdb_exit
+	    gdb_start
+	    gdb_reinitialize_dir $srcdir/$subdir
+	    gdb_load $binfile
+	    initialize
+	}
+    }
+
+    # Only enabled for some targets merely because it has not been tested 
+    # elsewhere.
+    # On sparc-sun-sunos4.1.3, GDB was running all the way to the marker4 
+    # breakpoint before stopping for the watchpoint.  I don't know why.
+    if {[istarget "hppa*-*-*"]} then {
+	test_watchpoint_triggered_in_syscall
+    }
+
+    # See above.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    # Only enabled for some targets merely because it has not been tested 
+    # elsewhere.
+    if {[istarget "hppa*-*-*"] || \
+	    [istarget "sparc*-*-sunos*"] || \
+	    [istarget "m32r-*-*"]} then {
+	test_complex_watchpoint
+    }
+}
diff --git a/gdb/testsuite/gdb.base/whatis-exp.exp b/gdb/testsuite/gdb.base/whatis-exp.exp
new file mode 100644
index 0000000..c5b97ee
--- /dev/null
+++ b/gdb/testsuite/gdb.base/whatis-exp.exp
@@ -0,0 +1,217 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for whatis command on expressions.
+# used in file eval.c. This flavor of whatis
+# command performs evaluation of expressions w/o actually
+# computing the value, but just the type
+# of the result. It goes through the evaluate_subexp_standard
+# with the EVAL_AVOID_SIDE_EFFECTS flag rather than EVAL_NORMAL
+# 
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "int-type"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+#
+# test expressions with "int" types
+#
+
+gdb_test "set variable x=14" "" "set variable x=14"
+gdb_test "set variable y=2" "" "set variable y=2"
+gdb_test "set variable z=2" "" "set variable z=2"
+gdb_test "set variable w=3" "" "set variable w=3"
+
+send_gdb "print x\n"
+gdb_expect {
+    -re ".*14.*$gdb_prompt $" {
+        pass "print value of x"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of x" }
+    timeout           { fail "(timeout) print value of x" }    
+  }
+
+
+send_gdb "print y\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of y"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of y" }
+    timeout           { fail "(timeout) print value of y" }    
+  }
+
+send_gdb "print z\n"
+gdb_expect {
+    -re ".*2.*$gdb_prompt $" {
+        pass "print value of z"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of z" }
+    timeout           { fail "(timeout) print value of z" }    
+  }
+
+send_gdb "print w\n"
+gdb_expect {
+    -re ".*3.*$gdb_prompt $" {
+        pass "print value of w"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of w" }
+    timeout           { fail "(timeout) print value of w" }    
+  }
+
+
+
+send_gdb "whatis x+y\n"
+gdb_expect {
+    -re ".*type = long.*$gdb_prompt $" {
+        pass "whatis value of x+y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x+y" }
+    timeout           { fail "(timeout) whatis value of x+y" }    
+  }
+
+send_gdb "whatis x-y\n"
+gdb_expect {
+    -re ".*type = long.*$gdb_prompt $" {
+        pass "whatis value of x-y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x-y" }
+    timeout           { fail "(timeout) whatis value of x-y" }    
+  }
+
+send_gdb "whatis x*y\n"
+gdb_expect {
+    -re ".*type = long.*$gdb_prompt $" {
+        pass "whatis value of x*y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x*y" }
+    timeout           { fail "(timeout) whatis value of x*y" }    
+  }
+
+send_gdb "whatis x/y\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x/y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x/y" }
+    timeout           { fail "(timeout) whatis value of x/y" }    
+  }
+
+send_gdb "whatis x%y\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x%y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x%y" }
+    timeout           { fail "(timeout) whatis value of x%y" }    
+  }
+
+
+
+send_gdb "whatis x=y\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x=y"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x=y" }
+    timeout           { fail "(timeout) whatis value of x=y" }
+  }
+
+
+send_gdb "whatis x+=2\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x+=2"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x+=2" }
+    timeout           { fail "(timeout) whatis value of x+=2" }
+  }
+
+
+send_gdb "whatis ++x\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of ++x"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of ++x" }
+    timeout           { fail "(timeout) whatis value of ++x" }
+  }
+
+send_gdb "whatis --x\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of --x"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of --x" }
+    timeout           { fail "(timeout) whatis value of --x" }
+  }
+
+send_gdb "whatis x++\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x++"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x++" }
+    timeout           { fail "(timeout) whatis value of x++" }
+  }
+
+send_gdb "whatis x--\n"
+gdb_expect {
+    -re ".*type = int.*$gdb_prompt $" {
+        pass "whatis value of x--"
+      }
+    -re ".*$gdb_prompt $" { fail "whatis value of x--" }
+    timeout           { fail "(timeout) whatis value of x--" }
+  }
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.base/whatis.c b/gdb/testsuite/gdb.base/whatis.c
new file mode 100644
index 0000000..6d8d1e6
--- /dev/null
+++ b/gdb/testsuite/gdb.base/whatis.c
@@ -0,0 +1,269 @@
+/*
+ *	Test file with lots of different types, for testing the
+ *	"whatis" command.
+ */
+
+/*
+ *	First the basic C types.
+ */
+
+#if !(defined (__STDC__) || defined (_AIX))
+#define signed  /**/
+#endif
+
+char		v_char;
+signed char	v_signed_char;
+unsigned char	v_unsigned_char;
+
+short		v_short;
+signed short	v_signed_short;
+unsigned short	v_unsigned_short;
+
+int		v_int;
+signed int	v_signed_int;
+unsigned int	v_unsigned_int;
+
+long		v_long;
+signed long	v_signed_long;
+unsigned long	v_unsigned_long;
+
+float		v_float;
+double		v_double;
+
+/*
+ *	Now some derived types, which are arrays, functions-returning,
+ *	pointers, structures, unions, and enumerations.
+ */
+
+/**** arrays *******/
+
+char		v_char_array[2];
+signed char	v_signed_char_array[2];
+unsigned char	v_unsigned_char_array[2];
+
+short		v_short_array[2];
+signed short	v_signed_short_array[2];
+unsigned short	v_unsigned_short_array[2];
+
+int		v_int_array[2];
+signed int	v_signed_int_array[2];
+unsigned int	v_unsigned_int_array[2];
+
+long		v_long_array[2];
+signed long	v_signed_long_array[2];
+unsigned long	v_unsigned_long_array[2];
+
+float		v_float_array[2];
+double		v_double_array[2];
+
+/**** pointers *******/
+
+/* Make sure they still print as pointer to foo even there is a typedef
+   for that type.  Test this not just for char *, which might be
+   a special case kludge in GDB (Unix system include files like to define
+   caddr_t), but for a variety of types.  */
+typedef char *char_addr;
+typedef unsigned short *ushort_addr;
+typedef signed long *slong_addr;
+
+char		*v_char_pointer;
+signed char	*v_signed_char_pointer;
+unsigned char	*v_unsigned_char_pointer;
+
+short		*v_short_pointer;
+signed short	*v_signed_short_pointer;
+unsigned short	*v_unsigned_short_pointer;
+
+int		*v_int_pointer;
+signed int	*v_signed_int_pointer;
+unsigned int	*v_unsigned_int_pointer;
+
+long		*v_long_pointer;
+signed long	*v_signed_long_pointer;
+unsigned long	*v_unsigned_long_pointer;
+
+float		*v_float_pointer;
+double		*v_double_pointer;
+
+/**** structs *******/
+
+struct t_struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct1;
+
+struct {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_struct2;
+
+/**** unions *******/
+
+union t_union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union;
+
+union {
+    char	v_char_member;
+    short	v_short_member;
+    int		v_int_member;
+    long	v_long_member;
+    float	v_float_member;
+    double	v_double_member;
+} v_union2;
+
+/*** Functions returning type ********/
+
+char		v_char_func () { return(0); }
+signed char	v_signed_char_func () { return (0); }
+unsigned char	v_unsigned_char_func () { return (0); }
+
+short		v_short_func () { return (0); }
+signed short	v_signed_short_func () { return (0); }
+unsigned short	v_unsigned_short_func () { return (0); }
+
+int		v_int_func () { return (0); }
+signed int	v_signed_int_func () { return (0); }
+unsigned int	v_unsigned_int_func () { return (0); }
+
+long		v_long_func () { return (0); }
+signed long	v_signed_long_func () { return (0); }
+unsigned long	v_unsigned_long_func () { return (0); }
+
+float		v_float_func () { return (0.0); }
+double		v_double_func () { return (0.0); }
+
+/**** Some misc more complicated things *******/
+
+struct link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} *s_link;
+
+union tu_link {
+	struct link *next;
+#ifdef __STDC__
+	struct link *(*linkfunc) (struct link *this, int flags);
+#else
+	struct link *(*linkfunc) ();
+#endif
+	struct t_struct stuff[1][2][3];
+} u_link;
+
+struct outer_struct {
+	int outer_int;
+	struct inner_struct {
+		int inner_int;
+		long inner_long;
+	}inner_struct_instance;
+	union inner_union {
+		int inner_union_int;
+		long inner_union_long;
+	}inner_union_instance;
+	long outer_long;
+} nested_su;
+
+/**** Enumerations *******/
+
+enum colors {red, green, blue} color;
+enum cars {chevy, ford, porsche} clunker;
+
+/***********/
+
+main ()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  /* Some linkers (e.g. on AIX) remove unreferenced variables,
+     so make sure to reference them. */
+  v_char = 0;
+  v_signed_char = 1;
+  v_unsigned_char = 2;
+
+  v_short = 3;
+  v_signed_short = 4;
+  v_unsigned_short = 5;    
+
+  v_int = 6;
+  v_signed_int = 7;
+  v_unsigned_int = 8;    
+
+  v_long = 9;
+  v_signed_long = 10;
+  v_unsigned_long = 11;    
+  
+  v_float = 100.0;
+  v_double = 200.0;
+
+
+  v_char_array[0] = v_char;
+  v_signed_char_array[0] = v_signed_char;
+  v_unsigned_char_array[0] = v_unsigned_char;
+
+  v_short_array[0] = v_short;
+  v_signed_short_array[0] = v_signed_short;
+  v_unsigned_short_array[0] = v_unsigned_short;
+
+  v_int_array[0] = v_int;
+  v_signed_int_array[0] = v_signed_int;
+  v_unsigned_int_array[0] = v_unsigned_int;
+
+  v_long_array[0] = v_long;
+  v_signed_long_array[0] = v_signed_long;
+  v_unsigned_long_array[0] = v_unsigned_long;
+
+  v_float_array[0] = v_float;
+  v_double_array[0] = v_double;
+
+  v_char_pointer = &v_char;
+  v_signed_char_pointer = &v_signed_char;
+  v_unsigned_char_pointer = &v_unsigned_char;
+
+  v_short_pointer = &v_short;
+  v_signed_short_pointer = &v_signed_short;
+  v_unsigned_short_pointer = &v_unsigned_short;
+
+  v_int_pointer = &v_int;
+  v_signed_int_pointer = &v_signed_int;
+  v_unsigned_int_pointer = &v_unsigned_int;
+
+  v_long_pointer = &v_long;
+  v_signed_long_pointer = &v_signed_long;
+  v_unsigned_long_pointer = &v_unsigned_long;
+
+  v_float_pointer = &v_float;
+  v_double_pointer = &v_double;
+
+  color = red;
+  clunker = porsche;
+
+  u_link.next = s_link;
+
+  v_union2.v_short_member = v_union.v_short_member;
+
+  v_struct1.v_char_member = 0;
+  v_struct2.v_char_member = 0;
+
+  nested_su.outer_int = 0;
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.base/whatis.exp b/gdb/testsuite/gdb.base/whatis.exp
new file mode 100644
index 0000000..1f4e8b3
--- /dev/null
+++ b/gdb/testsuite/gdb.base/whatis.exp
@@ -0,0 +1,393 @@
+#   Copyright (C) 1988, 1990, 1991, 1992, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Rob Savoye. (rob@cygnus.com)
+
+if $tracelevel {
+    strace $tracelevel
+}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile whatis
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+# If we did not use the signed keyword when compiling the file, don't
+# expect GDB to know that char is signed.
+if $signed_keyword_not_used then {
+    set signed_char "char"
+} else {
+    set signed_char "signed char"
+}
+
+# Define a procedure to set up an xfail for all targets that put out a
+# `long' type as an `int' type.
+# Sun/Ultrix cc have this problem.
+# It was said that COFF targets can not distinguish int from long either.
+
+proc setup_xfail_on_long_vs_int {} {
+    global gcc_compiled
+
+    if {!$gcc_compiled} {
+	setup_xfail "*-sun-sunos4*" "*-*-ultrix*" "i*86-sequent-bsd*"
+    }
+}
+
+#
+# Test whatis command with basic C types
+#
+# The name printed now (as of 23 May 1993) is whatever name the compiler
+# uses in the stabs.  So we need to deal with names both from gcc and
+# native compilers.
+#
+gdb_test "whatis v_char" \
+    "type = (unsigned char|char)" \
+    "whatis char"
+
+setup_xfail "a29k-*-*"
+if {!$gcc_compiled} then { setup_xfail "mips-sgi-irix*" }
+gdb_test "whatis v_signed_char" \
+    "type = $signed_char" \
+    "whatis signed char"
+
+gdb_test "whatis v_unsigned_char" \
+    "type = unsigned char" \
+    "whatis unsigned char"
+
+gdb_test "whatis v_short" \
+    "type = (short|short int)" \
+    "whatis short"
+
+gdb_test "whatis v_signed_short" \
+    "type = (short|short int|signed short|signed short int)" \
+    "whatis signed short"
+
+gdb_test "whatis v_unsigned_short" \
+    "type = (unsigned short|short unsigned int)" \
+    "whatis unsigned short" 
+
+gdb_test "whatis v_int" \
+    "type = int" \
+    "whatis int"
+
+gdb_test "whatis v_signed_int" \
+    "type = (signed |)int" \
+    "whatis signed int"
+
+gdb_test "whatis v_unsigned_int" \
+    "type = unsigned int" \
+    "whatis unsigned int"
+
+setup_xfail_on_long_vs_int
+# AIX xlc gets this wrong and unsigned long right.  Go figure.
+if {!$gcc_compiled} then {setup_xfail "rs6000-*-aix*"}
+gdb_test "whatis v_long" \
+    "type = (long|long int)" \
+    "whatis long"
+
+setup_xfail_on_long_vs_int
+# AIX xlc gets this wrong and unsigned long right.  Go figure.
+if {!$gcc_compiled} then {setup_xfail "rs6000-*-aix*"}
+gdb_test "whatis v_signed_long" \
+    "type = (signed |)(long|long int)" \
+    "whatis signed long"
+
+setup_xfail_on_long_vs_int
+gdb_test "whatis v_unsigned_long" \
+    "type = (unsigned long|long unsigned int)" \
+    "whatis unsigned long"
+
+gdb_test "whatis v_float" \
+    "type = float" \
+    "whatis float"
+
+gdb_test "whatis v_double" \
+    "type = double" \
+    "whatis double"
+
+
+# test whatis command with arrays
+#
+# We already tested whether char prints as "char", so here we accept
+# "unsigned char", "signed char", and other perversions.  No need for more
+# than one xfail for the same thing.
+gdb_test "whatis v_char_array" \
+    "type = (signed |unsigned |)char \\\[2\\\]" \
+    "whatis char array"
+
+gdb_test "whatis v_signed_char_array" \
+    "type = (signed |unsigned |)char \\\[2\\\]" \
+    "whatis signed char array"
+
+gdb_test "whatis v_unsigned_char_array" \
+    "type = unsigned char \\\[2\\\]" \
+    "whatis unsigned char array"
+
+gdb_test "whatis v_short_array" \
+    "type = (short|short int) \\\[2\\\]" \
+    "whatis short array"
+
+gdb_test "whatis v_signed_short_array" \
+    "type = (signed |)(short|short int) \\\[2\\\]" \
+    "whatis signed short array"
+
+gdb_test "whatis v_unsigned_short_array" \
+    "type = (unsigned short|short unsigned int) \\\[2\\\]" \
+    "whatis unsigned short array"
+
+gdb_test "whatis v_int_array" \
+    "type = int \\\[2\\\]" \
+    "whatis int array"
+
+gdb_test "whatis v_signed_int_array" \
+    "type = (signed |)int \\\[2\\\]" \
+    "whatis signed int array"
+
+gdb_test "whatis v_unsigned_int_array" \
+    "type = unsigned int \\\[2\\\]" \
+    "whatis unsigned int array"
+
+# We already tested whether long prints as long, so here we accept int
+# No need for more than one xfail for the same thing.
+gdb_test "whatis v_long_array" \
+    "type = (int|long|long int) \\\[2\\\]" \
+    "whatis long array"
+
+gdb_test "whatis v_signed_long_array" \
+    "type = (signed |)(int|long|long int) \\\[2\\\]" \
+    "whatis signed long array"
+
+gdb_test "whatis v_unsigned_long_array" \
+    "type = (unsigned (int|long|long int)|long unsigned int) \\\[2\\\]" \
+    "whatis unsigned long array"
+
+gdb_test "whatis v_float_array" \
+    "type = float \\\[2\\\]" \
+    "whatis float array"
+
+gdb_test "whatis v_double_array" \
+    "type = double \\\[2\\\]" \
+    "whatis double array"
+
+
+# test whatis command with pointers
+#
+# We already tested whether char prints as char, so accept various perversions
+# here.  We especially want to make sure we test that it doesn't print as
+# caddr_t.
+gdb_test "whatis v_char_pointer" \
+    "type = (unsigned |signed |)char \\*" \
+    "whatis char pointer"
+
+gdb_test "whatis v_signed_char_pointer" \
+    "type = (unsigned |signed |)char \\*" \
+    "whatis signed char pointer"
+
+gdb_test "whatis v_unsigned_char_pointer" \
+    "type = unsigned char \\*" \
+    "whatis unsigned char pointer"
+
+gdb_test "whatis v_short_pointer" \
+    "type = (short|short int) \\*" \
+    "whatis short pointer"
+
+gdb_test "whatis v_signed_short_pointer" \
+    "type = (signed |)(short|short int) \\*" \
+    "whatis signed short pointer"
+
+gdb_test "whatis v_unsigned_short_pointer" \
+    "type = (unsigned short|short unsigned int) \\*" \
+    "whatis unsigned short pointer"
+
+gdb_test "whatis v_int_pointer" \
+    "type = int \\*" \
+    "whatis int pointer"
+
+gdb_test "whatis v_signed_int_pointer" \
+    "type = (signed |)int \\*" \
+    "whatis signed int pointer"
+
+gdb_test "whatis v_unsigned_int_pointer" \
+    "type = unsigned int \\*" \
+    "whatis unsigned int pointer"
+
+# We already tested whether long prints as long, so here we accept int
+gdb_test "whatis v_long_pointer" \
+    "type = (long|int|long int) \\*" \
+    "whatis long pointer"
+
+gdb_test "whatis v_signed_long_pointer" \
+    "type = (signed |)(long|int|long int) \\*" \
+    "whatis signed long pointer"
+
+gdb_test "whatis v_unsigned_long_pointer" \
+    "type = (unsigned (int|long|long int)|long unsigned int) \\*" \
+    "whatis unsigned long pointer"
+
+gdb_test "whatis v_float_pointer" \
+    "type = float \\*" \
+    "whatis float pointer"
+
+gdb_test "whatis v_double_pointer" \
+    "type = double \\*" \
+    "whatis double pointer"
+
+
+# test whatis command with structure types
+gdb_test "whatis v_struct1" \
+    "type = struct t_struct" \
+    "whatis named structure"
+
+gdb_test "whatis v_struct2" \
+    "type = struct \{...\}" \
+    "whatis unnamed structure"
+
+
+# test whatis command with union types
+gdb_test "whatis v_union" \
+    "type = union t_union" \
+    "whatis named union"
+
+gdb_test "whatis v_union2" \
+    "type = union \{...\}" \
+    "whatis unnamed union"
+
+
+
+# test whatis command with functions return type
+gdb_test "whatis v_char_func" \
+    "type = (signed |unsigned |)char \\(\\)" \
+    "whatis char function"
+
+gdb_test "whatis v_signed_char_func" \
+    "type = (signed |unsigned |)char \\(\\)" \
+    "whatis signed char function"
+
+gdb_test "whatis v_unsigned_char_func" \
+    "type = unsigned char \\(\\)"	\
+    "whatis unsigned char function"
+
+gdb_test "whatis v_short_func" \
+    "type = short (int |)\\(\\)" \
+    "whatis short function"
+
+gdb_test "whatis v_signed_short_func" \
+    "type = (signed |)short (int |)\\(\\)" \
+    "whatis signed short function"
+
+gdb_test "whatis v_unsigned_short_func" \
+    "type = (unsigned short|short unsigned int) \\(\\)" \
+    "whatis unsigned short function"
+
+gdb_test "whatis v_int_func" \
+    "type = int \\(\\)" \
+    "whatis int function"
+
+gdb_test "whatis v_signed_int_func" \
+    "type = (signed |)int \\(\\)" \
+    "whatis signed int function"
+
+gdb_test "whatis v_unsigned_int_func" \
+    "type = unsigned int \\(\\)" \
+    "whatis unsigned int function"
+
+gdb_test "whatis v_long_func" \
+    "type = (long|int|long int) \\(\\)" \
+    "whatis long function"
+
+gdb_test "whatis v_signed_long_func" \
+    "type = (signed |)(int|long|long int) \\(\\)" \
+    "whatis signed long function"
+
+gdb_test "whatis v_unsigned_long_func" \
+    "type = (unsigned (int|long|long int)|long unsigned int) \\(\\)" \
+    "whatis unsigned long function"
+
+# Sun /bin/cc calls this a function returning double.
+if {!$gcc_compiled} then {setup_xfail "*-sun-sunos4*"}
+gdb_test "whatis v_float_func" \
+    "type = float \\(\\)" \
+    "whatis float function"
+
+gdb_test "whatis v_double_func" \
+    "type = double \\(\\)" \
+    "whatis double function" \
+
+
+# test whatis command with some misc complicated types
+gdb_test "whatis s_link" \
+    "type = struct link \\*" \
+    "whatis complicated structure"
+
+gdb_test "whatis u_link" \
+    "type = union tu_link" \
+    "whatis complicated union"
+
+
+# test whatis command with enumerations
+gdb_test "whatis clunker" \
+    "type = enum cars" \
+    "whatis enumeration"
+
+
+# test whatis command with nested struct and union
+gdb_test "whatis nested_su" \
+    "type = struct outer_struct" \
+    "whatis outer structure"
+
+gdb_test "whatis nested_su.outer_int" \
+    "type = int" \
+    "whatis outer structure member"
+
+gdb_test "whatis nested_su.inner_struct_instance" \
+    "type = struct inner_struct" \
+    "whatis inner structure"
+
+gdb_test "whatis nested_su.inner_struct_instance.inner_int" \
+    "type = int" \
+    "whatis inner structure member"
+
+gdb_test "whatis nested_su.inner_union_instance" \
+    "type = union inner_union" \
+    "whatis inner union"
+
+gdb_test "whatis nested_su.inner_union_instance.inner_union_int" \
+    "type = int" \
+    "whatis inner union member"
diff --git a/gdb/testsuite/gdb.c++/Makefile.in b/gdb/testsuite/gdb.c++/Makefile.in
new file mode 100644
index 0000000..13a1234
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/Makefile.in
@@ -0,0 +1,20 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+PROGS = anon-union compiler cplusfuncs derivation inherit local \
+	member-ptr method misc \
+        overload ovldbreak ref-types ref-types2 templates userdef virtfunc
+
+all: 
+	@echo "Nothing to be done for all..."
+
+#### host, target, and site specific Makefile frags come in here.
+
+clean mostlyclean:
+	-rm -f *.ci *.o ${OBJS} ${PROGS} *~ core 
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.c++/anon-union.cc b/gdb/testsuite/gdb.c++/anon-union.cc
new file mode 100644
index 0000000..c58a306
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/anon-union.cc
@@ -0,0 +1,54 @@
+
+struct Foo {
+  union {
+    int zero;
+    unsigned int one;
+  } num1;
+
+  union {
+    int pebble;
+    struct {
+      int rock;
+      unsigned int rock2;
+    } x;
+    union {
+      int qux;
+      unsigned int mux;
+    };
+    unsigned int boulder;
+  };
+  union {
+    int paper;
+    unsigned int cloth;
+  };
+  union {
+    int two;
+    unsigned int three;
+  } num2;
+};
+
+union Bar {
+  int x;
+  unsigned int y;
+};
+
+Foo foo;
+Bar bar;
+
+int main()
+{
+  foo.paper = 33;
+  foo.pebble = 44;
+  foo.mux = 55;
+
+  bar.x = 33;
+
+  union
+  {
+    int z;
+    unsigned int w;
+  };
+
+  w = 45;
+
+}
diff --git a/gdb/testsuite/gdb.c++/anon-union.exp b/gdb/testsuite/gdb.c++/anon-union.exp
new file mode 100644
index 0000000..83171a2
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/anon-union.exp
@@ -0,0 +1,337 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+#
+# Tests for anonymous union support
+# Written by Satish Pai <pai@apollo.hp.com> 1997-08-19
+
+# This file is part of the gdb testsuite
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+
+set prms_id 0
+set bug_id 0
+
+set testfile "anon-union"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Start with a fresh gdb
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "set width 0\n"
+gdb_expect -re "$gdb_prompt $"
+
+#send_gdb "ptype foo\n"
+#gdb_expect {
+#   -re "\r\n$gdb_prompt $" {
+#      pass "ptype foo"
+#    }
+#    -re ".*$gdb_prompt $" { fail "ptype foo" }
+#    timeout { fail "(timeout) ptype foo" }
+#}
+
+#send_gdb "ptype bar\n"
+#gdb_expect {
+#   -re "\r\n$gdb_prompt $" {
+#      pass "ptype foo"
+#    }
+#    -re ".*$gdb_prompt $" { fail "ptype foo" }
+#    timeout { fail "(timeout) ptype foo" }
+#}
+
+# NOTE: Add -- ptype foo.x, etc. when things are working
+
+# Print out the big anon union.
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 0, x = \{rock = 0, rock2 = 0\}, \{qux = 0, mux = 0\}, boulder = 0\}, \{paper = 0, cloth = 0\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 1"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 1" }
+    timeout { fail "(timeout) print foo 1" }
+}
+
+# Step over assignment to member
+
+send_gdb "next\n"
+gdb_expect {
+   -re "41\[ \t\]*foo.pebble = 44;\r\n$gdb_prompt $" {
+      pass "next 1"
+    }
+    -re ".*$gdb_prompt $" { fail "next 1" }
+    timeout { fail "(timeout) next 1" }
+}
+
+# Now print out anon union again
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 0, x = \{rock = 0, rock2 = 0\}, \{qux = 0, mux = 0\}, boulder = 0\}, \{paper = 33, cloth = 33\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 2"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 2" }
+    timeout { fail "(timeout) print foo 2" }
+}
+
+# Modify the member just set
+send_gdb "set var foo.cloth = 35\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.cloth"
+    }
+    timeout { fail "(timeout) set var foo.cloth" }
+}
+
+# Now print out anon union again to see if the right member was set 
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 0, x = \{rock = 0, rock2 = 0\}, \{qux = 0, mux = 0\}, boulder = 0\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 3"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 3" }
+    timeout { fail "(timeout) print foo 3" }
+}
+
+
+# Step over next assignment to member
+
+send_gdb "next\n"
+gdb_expect {
+   -re "42\[ \t\]*foo.mux = 55;\r\n$gdb_prompt $" {
+      pass "next 2"
+    }
+    -re ".*$gdb_prompt $" { fail "next 2" }
+    timeout { fail "(timeout) next 2" }
+}
+
+# Now print out anon union again 
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 44, x = \{rock = 44, rock2 = 0\}, \{qux = 44, mux = 44\}, boulder = 44\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 4"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 4" }
+    timeout { fail "(timeout) print foo 4" }
+}
+
+# Modify the member just set
+send_gdb "set var foo.pebble = 45\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.pebble"
+    }
+    timeout { fail "(timeout) set var foo.pebble" }
+}
+
+# Now print out anon union again to see if the right member was set 
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 45, x = \{rock = 45, rock2 = 0\}, \{qux = 45, mux = 45\}, boulder = 45\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 5"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 5" }
+    timeout { fail "(timeout) print foo 5" }
+}
+
+# Modify another member at a different level
+send_gdb "set var foo.qux = 46\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.qux"
+    }
+    timeout { fail "(timeout) set var foo.qux" }
+}
+
+# Now print out anon union again to see if the right member was set 
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 46, x = \{rock = 46, rock2 = 0\}, \{qux = 46, mux = 46\}, boulder = 46\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 6"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 6" }
+    timeout { fail "(timeout) print foo 6" }
+}
+
+# Modify the member at another level, but not the first one in the union
+send_gdb "set var foo.mux = 47\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.mux"
+    }
+    timeout { fail "(timeout) set var foo.mux" }
+}
+
+# Now print out anon union again to see if things worked
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 47, x = \{rock = 47, rock2 = 0\}, \{qux = 47, mux = 47\}, boulder = 47\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 7"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 7" }
+    timeout { fail "(timeout) print foo 7" }
+}
+
+# Modify a member of a struct in an anon union
+send_gdb "set var foo.x.rock = 48\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.x.rock"
+    }
+    timeout { fail "(timeout) set var foo.x.rock" }
+}
+
+# Now print out anon union again to see if things worked
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 48, x = \{rock = 48, rock2 = 0\}, \{qux = 48, mux = 48\}, boulder = 48\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 8"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 8" }
+    timeout { fail "(timeout) print foo 8" }
+}
+
+# Modify a member of a struct in an anon union, but something
+# that doesn't alias to some other union member
+send_gdb "set var foo.x.rock2 = 49\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var foo.x.rock2"
+    }
+    timeout { fail "(timeout) set var foo.x.rock2" }
+}
+
+# Now print out anon union again to see if things worked
+send_gdb "print foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{num1 = \{zero = 0, one = 0\}, \{pebble = 48, x = \{rock = 48, rock2 = 49\}, \{qux = 48, mux = 48\}, boulder = 48\}, \{paper = 35, cloth = 35\}, num2 = \{two = 0, three = 0\}\}\r\n$gdb_prompt $" {
+      pass "print foo 9"
+    }
+    -re ".*$gdb_prompt $" { fail "print foo 9" }
+    timeout { fail "(timeout) print foo 9" }
+}
+
+
+# Step over next two assignments
+send_gdb "next 2\n"
+gdb_expect {
+   -re "52\[ \t\]*w = 45;\r\n$gdb_prompt $" {
+      pass "next 3"
+    }
+    -re ".*$gdb_prompt $" { fail "next 3" }
+    timeout { fail "(timeout) next 3" }
+}
+
+# Tests for anon unions that are not members of a class or struct
+
+# w is not yet initialized; it contains garbage
+#send_gdb "print w\n"
+#gdb_expect {
+#   -re "\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+#      pass "print w 1"
+#    }
+#    -re ".*$gdb_prompt $" { fail "print w 1" }
+#    timeout { fail "(timeout) print w 1" }
+#}
+#
+# z is not yet initialized; it contains garbage
+#send_gdb "print z\n"
+#gdb_expect {
+#   -re "\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+#      pass "print z 1"
+#    }
+#    -re ".*$gdb_prompt $" { fail "print z 1" }
+#    timeout { fail "(timeout) print z 1" }
+#}
+
+# Step over next assignment to w
+send_gdb "next\n"
+gdb_expect {
+   -re "54\[ \t\]*\}\r\n$gdb_prompt $" {
+      pass "next 4"
+    }
+    -re ".*$gdb_prompt $" { fail "next 4" }
+    timeout { fail "(timeout) next 4" }
+}
+
+# See if the change in value is noticed
+send_gdb "print w\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 45\r\n$gdb_prompt $" {
+      pass "print w 2"
+    }
+    -re ".*$gdb_prompt $" { fail "print w 2" }
+    timeout { fail "(timeout) print w 2" }
+}
+
+# See if z shows the same value
+send_gdb "print z\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 45\r\n$gdb_prompt $" {
+      pass "print z 2"
+    }
+    -re ".*$gdb_prompt $" { fail "print z 2" }
+    timeout { fail "(timeout) print z 2" }
+}
+
+# Set the anon union member 
+send_gdb "set var z = 27\n"
+gdb_expect {
+   -re "\r\n$gdb_prompt $" {
+      pass "set var z"
+    }
+    timeout { fail "(timeout) set var z" }
+}
+
+# See if the change in value is noticed
+send_gdb "print w\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 27\r\n$gdb_prompt $" {
+      pass "print w 3"
+    }
+    -re ".*$gdb_prompt $" { fail "print w 3" }
+    timeout { fail "(timeout) print w 3" }
+}
+
+# See if z shows the same value
+send_gdb "print z\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 27\r\n$gdb_prompt $" {
+      pass "print z 3"
+    }
+    -re ".*$gdb_prompt $" { fail "print z 3" }
+    timeout { fail "(timeout) print z 3" }
+}
diff --git a/gdb/testsuite/gdb.c++/classes.exp b/gdb/testsuite/gdb.c++/classes.exp
new file mode 100644
index 0000000..5e97cb4
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/classes.exp
@@ -0,0 +1,850 @@
+# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+set nl "\[\r\n\]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "misc"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1
+}
+
+# if we are on HPUX and we are not compiled with gcc, then skip these tests.
+
+if [istarget hppa*-*-hpux*] {
+    if {!$gcc_compiled} {
+	continue 
+    }
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Test ptype of class objects.
+#
+
+proc test_ptype_class_objects {} {
+    global gdb_prompt
+    global ws
+    global nl
+
+    # Note that struct members are public by default, so we don't print
+    # "public:" for the public members of structs.
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype struct default_public_struct\n"
+    gdb_expect {
+	-re "type = struct default_public_struct \{${ws}int a;${ws}int b;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype struct default_public_struct"
+	}
+	-re "type = class default_public_struct \{$nl.*int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct default_public_struct"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct default_public_struct" }
+	timeout { fail "ptype struct default_public_struct (timeout)" ; return }
+    }
+
+    # Note that struct members are public by default, so we don't print
+    # "public:" for the public members of structs.
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype struct explicit_public_struct\n"
+    gdb_expect {
+	-re "type = struct explicit_public_struct \{${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype struct explicit_public_struct"
+	}
+	-re "type = class explicit_public_struct \{$nl.*int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct explicit_public_struct"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct explicit_public_struct" }
+	timeout { fail "ptype struct explicit_public_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct protected_struct\n"
+    gdb_expect {
+	-re "type = struct protected_struct \{${ws}protected:${ws}int a;${ws}int b;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype struct protected_struct (FIXME)"
+	}
+	-re "type = class protected_struct \{${ws}protected:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct protected_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct protected_struct" }
+	timeout { fail "ptype struct protected_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct private_struct\n"
+    gdb_expect {
+	-re "type = struct private_struct \{${ws}private:${ws}int a;${ws}int b;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype struct private_struct (FIXME)"
+	}
+	-re "type = class private_struct \{${ws}private:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" { 
+	    setup_xfail "*-*-*"
+	    fail "ptype struct private_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct private_struct" }
+	timeout { fail "ptype struct private_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct mixed_protection_struct\n"
+    gdb_expect {
+	-re "type = struct mixed_protection_struct \{${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype struct mixed_protection_struct (FIXME)"
+	}
+	-re "type = class mixed_protection_struct \{${ws}public:${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct mixed_protection_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct mixed_protection_struct" }
+	timeout { fail "ptype struct mixed_protection_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype class public_class\n"
+    gdb_expect {
+	-re "type = class public_class \{${ws}public:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class public_class (FIXME)"
+	}
+	-re "type = struct public_class \{${ws}int a;${ws}int b;$nl\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class public_class (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class public_class" }
+	timeout { fail "ptype class public_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class protected_class\n"
+    gdb_expect {
+	-re "type = class protected_class \{${ws}protected:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class protected_class"
+	}
+	-re "type = struct protected_class \{${ws}int a;${ws}int b;$nl\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class protected_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class protected_class" }
+	timeout { fail "ptype class protected_class (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just emits a superflous "private:"
+    # attribute, since classes default to private and for consistency with
+    # structs (where we don't print the "public:" attribute) we don't print
+    # the "private:" attribute.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class default_private_class\n"
+    gdb_expect {
+	-re "type = class default_private_class \{${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class default_private_class (FIXME)"
+	}
+	-re "type = class default_private_class \{${ws}private:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class default_private_class (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class default_private_class" }
+	timeout { fail "ptype class default_private_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class explicit_private_class\n"
+    gdb_expect {
+	-re "type = class explicit_private_class \{${ws}private:${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class explicit_private_class"
+	}
+	-re "type = struct explicit_private_class \{${ws}int a;${ws}int b;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class explicit_private_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class explicit_private_class" }
+	timeout { fail "ptype class explicit_private_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class mixed_protection_class\n"
+    gdb_expect {
+	-re "type = class mixed_protection_class \{${ws}public:${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class mixed_protection_class"
+	}
+	-re "type = struct mixed_protection_class \{${ws}int a;${ws}int b;${ws}int c;${ws}int d;${ws}int e;${ws}int f;${ws}int g;${ws}int h;${ws}int i;$nl.*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class mixed_protection_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class mixed_protection_class" }
+	timeout { fail "ptype class mixed_protection_class (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype class A\n"
+    gdb_expect {
+	-re "type = (class|struct) A \{(${ws}public:|)${ws}int a;${ws}int x;((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(A const &\\);)|(${ws}A\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class A"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class A"
+	}
+	timeout {
+	    fail "ptype class A (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class B\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}public:${ws}int b;${ws}int x;${ws}B & operator=\\(B const &\\);${ws}B\\(B const &\\);${ws}B\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class B"
+	}
+	-re "type = class B : public A \{${ws}public:${ws}int b;${ws}int x;((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(B const &\\);)|(${ws}B\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class B (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class B"
+	}
+	timeout {
+	    fail "ptype class B (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class C\n"
+    gdb_expect {
+	-re "type = class C : public A \{${ws}public:${ws}int c;${ws}int x;${ws}C & operator=\\(C const &\\);${ws}C\\(C const &\\);${ws}C\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class C"
+	}
+	-re "type = class C : public A \{${ws}public:${ws}int c;${ws}int x;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(C const &\\);)|(${ws}C\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class C (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class C"
+	}
+	timeout {
+	    fail "ptype class C (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class D\n"
+    gdb_expect {
+	-re "type = class D : public B, public C \{${ws}public:${ws}int d;${ws}int x;${ws}D & operator=\\(D const &\\);${ws}D\\(D const &\\);${ws}D\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class D"
+	}
+	-re "type = class D : public B, public C \{${ws}public:${ws}int d;${ws}int x;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(D const &\\);)|(${ws}D\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class D (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class D"
+	}
+	timeout {
+	    fail "ptype class D (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class E\n"
+    gdb_expect {
+	-re "type = class E : public D \{${ws}public:${ws}int e;${ws}int x;${ws}E & operator=\\(E const &\\);${ws}E\\(E const &\\);${ws}E\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class E"
+	}
+	-re "type = class E : public D \{${ws}public:${ws}int e;${ws}int x;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(E const &\\);)|(${ws}E\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class E"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class E"
+	}
+	timeout {
+	    fail "ptype class E (timeout)"
+	    return
+	}
+    }
+
+    send_gdb "ptype class vA\n"
+    gdb_expect {
+	-re "type = (class|struct) vA \{(${ws}public:|)${ws}int va;${ws}int vx;${ws}vA & operator=\\(vA const &\\);${ws}vA\\(vA const &\\);${ws}vA\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re "type = (class|struct) vA \{(${ws}public:|)${ws}int va;${ws}int vx;((${ws}vA & operator=\\(vA const &\\);)|(${ws}vA\\(vA const &\\);)|(${ws}vA\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class vA (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vA"
+	}
+	timeout {
+	    fail "ptype class vA (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vB\n"
+    gdb_expect {
+	-re "type = class vB : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vb;${ws}int vx;${ws}vB & operator=\\(vB const &\\);${ws}vB\\(int, vB const &\\);${ws}vB\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vB (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vB : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vb;${ws}int vx;((${ws}vB & operator=\\(vB const &\\);)|(${ws}vB\\(int, vB const &\\);)|(${ws}vB\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vB (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vB"
+	}
+	timeout {
+	    fail "ptype class vB (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vC\n"
+    gdb_expect {
+	-re "type = class vC : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vc;${ws}int vx;${ws}vC & operator=\\(vC const &\\);${ws}vC\\(int, vC const &\\);${ws}vC\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vC (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vC : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vc;${ws}int vx;((${ws}vC & operator=\\(vC const &\\);)|(${ws}vC\\(int, vC const &\\);)|(${ws}vC\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vC (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vC"
+	}
+	timeout {
+	    fail "ptype class vC (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vD\n"
+    gdb_expect {
+	-re "type = class vD : public virtual vB, public virtual vC \{${ws}private:${ws}vC \\*_vb.vC;${ws}vB \\*_vb.vB;${ws}public:${ws}int vd;${ws}int vx;${ws}vD & operator=\\(vD const &\\);${ws}vD\\(int, vD const &\\);${ws}vD\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vD (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vD : public virtual vB, public virtual vC \{${ws}private:${ws}vC \\*_vb.vC;${ws}vB \\*_vb.vB;${ws}public:${ws}int vd;${ws}int vx;((${ws}vD & operator=\\(vD const &\\);)|(${ws}vD\\(int, vD const &\\);)|(${ws}vD\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vD (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vD"
+	}
+	timeout {
+	    fail "ptype class vD (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vE\n"
+    gdb_expect {
+	-re "type = class vE : public virtual vD \{${ws}private:${ws}vD \\*_vb.vD;${ws}public:${ws}int ve;${ws}int vx;${ws}vE & operator=\\(vE const &\\);${ws}vE\\(int, vE const &\\);${ws}vE\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vE (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vE : public virtual vD \{${ws}private:${ws}vD \\*_vb.vD;${ws}public:${ws}int ve;${ws}int vx;((${ws}vE & operator=\\(vE const &\\);)|(${ws}vE\\(int, vE const &\\);)|(${ws}vE\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vE (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vE"
+	}
+	timeout {
+	    fail "ptype class vE (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Base1\n"
+    gdb_expect {
+	-re "type = class Base1 \{${ws}public:${ws}int x;${ws}Base1 & operator=\\(Base1 const &\\);${ws}Base1\\(Base1 const &\\);${ws}Base1\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Base1"
+	}
+	-re "type = class Base1 \{${ws}public:${ws}int x;((${ws}Base1 & operator=\\(Base1 const &\\);)|(${ws}Base1\\(Base1 const &\\);)|(${ws}Base1\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Base1 (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Base1"
+	}
+	timeout {
+	    fail "ptype class Base1 (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Foo\n"
+    gdb_expect {
+	-re "type = class Foo \{${ws}public:${ws}int x;${ws}int y;${ws}static int st;${ws}Foo & operator=\\(Foo const &\\);${ws}Foo\\(Foo const &\\);${ws}Foo\\(int, int\\);${ws}int operator!\\(void\\);${ws}int operator int\\(void\\);${ws}int times\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Foo"
+	}
+	-re "type = class Foo \{${ws}public:${ws}int x;${ws}int y;${ws}static int st;((${ws}Foo & operator=\\(Foo const &\\);)|(${ws}Foo\\(Foo const &\\);)|(${ws}Foo\\(int, int\\);)|(${ws}int operator!\\(void\\);)|(${ws}int operator int\\(void\\);)|(${ws}int times\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Foo (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Foo"
+	}
+	timeout {
+	    fail "ptype class Foo (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Bar\n"
+    gdb_expect {
+	-re "type = class Bar : public Base1, public Foo \{${ws}public:${ws}int z;${ws}Bar & operator=\\(Bar const &\\);${ws}Bar\\(Bar const &\\);${ws}Bar\\(int, int, int\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Bar"
+	}
+	-re "type = class Bar : public Base1, public Foo \{${ws}public:${ws}int z;((${ws}Bar & operator=\\(Bar const &\\);)|(${ws}Bar\\(Bar const &\\);)|(${ws}Bar\\(int, int, int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype class Bar (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Bar"
+	}
+	timeout {
+	    fail "ptype class Bar (timeout)"
+	    return
+	}
+    }
+}
+
+#
+# Test simple access to class members.
+#
+
+proc test_non_inherited_member_access {} {
+    global gdb_prompt
+    
+    # Print non-inherited members of g_A.
+
+    gdb_test "print g_A.a" ".* = 1" "g_A.a incorrect"
+
+    gdb_test "print g_A.x" ".* = 2" "g_A.x incorrect"
+
+    # Print non-inherited members of g_B.
+
+    gdb_test "print g_B.b" ".* = 5" "g_B.b incorrect"
+
+    gdb_test "print g_B.x" ".* = 6" "g_B.x incorrect"
+
+    # Print non-inherited members of g_C.
+
+    gdb_test "print g_C.c" ".* = 9" "g_C.c incorrect"
+
+    gdb_test "print g_C.x" ".* = 10" "g_C.x incorrect"
+
+    # Print non-inherited members of g_D.
+
+    gdb_test "print g_D.d" ".* = 19" "g_D.d incorrect"
+
+    gdb_test "print g_D.x" ".* = 20" "g_D.x incorrect"
+
+    # Print non-inherited members of g_E.
+
+    gdb_test "print g_E.e" ".* = 31" "g_E.e incorrect"
+
+    gdb_test "print g_E.x" ".* = 32" "g_E.x incorrect"
+}
+
+#
+# Try access to non-members that are members of another class.
+# Should give errors.
+#
+
+proc test_wrong_class_members {} {
+    global gdb_prompt
+
+    gdb_test "print g_A.b" "There is no member( or method|) named b." "print g_A.b should be error"
+
+    gdb_test "print g_B.c" "There is no member( or method|) named c." "print g_B.c should be error"
+
+    gdb_test "print g_B.d" "There is no member( or method|) named d." "print g_B.d should be error"
+
+    gdb_test "print g_C.b" "There is no member( or method|) named b." "print g_C.b should be error"
+
+    gdb_test "print g_C.d" "There is no member( or method|) named d." "print g_C.d should be error"
+
+    gdb_test "print g_D.e" "There is no member( or method|) named e." "print g_D.e should be error"
+}
+
+#
+# Try access to non-members that are not members of any class.
+# Should give errors.
+#
+
+proc test_nonexistant_members {} {
+    global gdb_prompt
+
+    gdb_test "print g_A.y" "There is no member( or method|) named y." "print g_A.y should be error"
+
+    gdb_test "print g_B.z" "There is no member( or method|) named z." "print g_B.z should be error"
+
+    gdb_test "print g_C.q" "There is no member( or method|) named q." "print g_C.q should be error"
+
+    gdb_test "print g_D.p" "There is no member( or method|) named p." "print g_D.p should be error"
+}
+
+#
+# Pointers to class members
+#
+
+proc test_pointers_to_class_members {} {
+    global gdb_prompt
+    global decimal
+    global nl
+
+    gdb_test "print Bar::z" ".* = .int\[ \]*\[( \]*Bar::&\[)\]+\[ \]*Bar::z" "print Bar::z"
+
+    gdb_test "print &Foo::x" ".* = .int\[ \]*\[( \]*Foo::\[*)\]+\[ \]*&Foo::x" "print &Foo::x"
+
+    gdb_test "print (int)&Foo::x" ".* = 0" "print (int)&Foo::x"
+
+    send_gdb "print (int)&Bar::y == 2*sizeof(int)\n"
+    gdb_expect {
+	-re ".* = true$nl$gdb_prompt $" {
+	    pass "print (int)&Bar::y == 2*sizeof(int)"
+	}
+	-re "There is no field named y.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print (int)&Bar::y == 2*sizeof(int)"
+	}
+	-re ".*$gdb_prompt $" { fail "print (int)&Bar::y == 2*sizeof(int)" }
+	timeout { fail "print (int)&Bar::y == 2*sizeof(int) (timeout)" ; return }
+    }
+
+    send_gdb "next\n"
+    setup_xfail "*-*-*"
+    gdb_expect {
+	-re "$decimal\[ \t\]+inheritance3 \[)(\]+;$nl$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "next to inheritance3" ; return }
+    }
+    clear_xfail "*-*-*"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print (int)pmi == sizeof(int)" ".* = false" "print (int)pmi == sizeof(int)"
+}
+
+#
+# Test static members.
+#
+
+proc test_static_members {} {
+    global gdb_prompt
+    global hex
+    global nl
+
+    send_gdb "print Foo::st\n"
+    gdb_expect {
+	-re ".* = 100$nl$gdb_prompt $" {
+	    pass "print Foo::st"
+	}
+	-re "There is no field named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print Foo::st"
+	}
+	-re ".*$gdb_prompt $" { fail "print Foo::st" }
+       timeout { fail "print Foo::st (timeout)" ; return }
+    }
+
+    send_gdb "set foo.st = 200\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+    }
+
+    send_gdb "print bar.st\n"
+    gdb_expect {
+	-re ".* = 200$nl$gdb_prompt $" {
+	    pass "print bar.st"
+	}
+	-re "There is no member( or method|) named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print bar.st"
+	}
+	-re ".*$gdb_prompt $" { fail "print bar.st" }
+       timeout { fail "print bar.st (timeout)" ; return }
+    }
+
+    send_gdb "print &foo.st\n"
+    gdb_expect {
+	-re ".* = .int \[*)\]+ $hex$nl$gdb_prompt $" {
+	    pass "print &foo.st"
+	}
+	-re "There is no member( or method|) named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print &foo.st"
+	}
+	-re ".*$gdb_prompt $" { fail "print &foo.st" }
+       timeout { fail "print &foo.st (timeout)" ; return }
+    }
+
+    set got_bar_st 0
+    send_gdb "print &Bar::st\n"
+    gdb_expect {
+	-re ".* = .int \[*)\]+ $hex$nl$gdb_prompt $" {
+	    pass "print &Bar::st"
+	    set got_bar_st 1
+	}
+	-re "There is no field named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print &Bar::st"
+	}
+	-re ".*$gdb_prompt $" { fail "print &Bar::st" }
+       timeout { fail "print &Bar::st (timeout)" ; return }
+    }
+
+    if $got_bar_st then {
+	gdb_test "print *\$" ".* = 200" "print *\$"
+    }
+
+    gdb_test "set print static-members off" ""
+    gdb_test "print csi" \
+	"{x = 10, y = 20}" \
+	"print csi without static members"
+    gdb_test "print cnsi" \
+	"{x = 30, y = 40}" \
+	"print cnsi without static members"
+
+    gdb_test "set print static-members on" ""
+    setup_xfail_format "DWARF 1"
+    gdb_test "print csi" \
+	"{x = 10, y = 20, static null = {x = 0, y = 0, static null = <same as static member of an already seen type>}}" \
+	"print csi with static members"
+    setup_xfail_format "DWARF 1"
+    gdb_test "print cnsi" \
+	"{x = 30, y = 40, static null = {x = 0, y = 0, static null = <same as static member of an already seen type>, static yy = {z = 5, static xx = {x = 1, y = 2, static null = <same as static member of an already seen type>, static yy = <same as static member of an already seen type>}}}, static yy = <same as static member of an already seen type>}" \
+	"print cnsi with static members"
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+
+    # Get the debug format for the compiled test case.
+
+    if [ runto_main ] then {
+	get_debug_format
+    }
+
+    test_ptype_class_objects
+
+    if [ runto 'inheritance2(void)' ] then {
+	test_non_inherited_member_access
+	test_wrong_class_members
+	test_nonexistant_members
+    }
+
+    if [istarget "mips-idt-*"] then {
+	# Restart because IDT/SIM runs out of file descriptors.
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+    }
+
+    if [ runto_main ] then {
+	test_pointers_to_class_members
+	test_static_members
+    }
+
+    if [istarget "mips-idt-*"] then {
+	# Restart because IDT/SIM runs out of file descriptors.
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+    }
+ 
+    if [ runto marker_reg1 ] then {
+
+	gdb_test "finish" "Run till exit from.*" "finish from marker_reg1"
+
+	send_gdb "print v.method ()\n"
+	gdb_expect {
+	    -re "= 82.*$gdb_prompt $" {
+		pass "calling method for small class"
+	    }
+	    -re "Address requested for identifier .v. which is in a register.*$gdb_prompt $" {
+		setup_xfail "*-*-*" 2972
+		fail "calling method for small class"
+	    }
+	    -re ".*$gdb_prompt $" { fail "calling method for small class" }
+	    timeout { fail "calling method for small class (timeout)" }
+	    eof { fail "calling method for small class (eof)" }
+	}
+    }
+
+}
+
+do_tests
+
+
+# Some additional tests for enums inside classes
+
+
+# set a breakpoint and go there
+send_gdb "break 498\n"   
+gdb_expect {   
+   -re "Breakpoint \[0-9\] at.*$gdb_prompt $" { pass "set break 498" }
+   -re "$gdb_prompt $"                     { fail "set break 498" }
+   timeout                             { fail "(timeout) set break 498" }
+}
+send_gdb "continue\n"   
+gdb_expect {   
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at.*misc\\.cc:498\r\n498.*\r\n$gdb_prompt $" { pass "continue" }
+   -re "$gdb_prompt $"                     { fail "continue" }
+   timeout                             { fail "(timeout) continue" }
+}
+
+# print the object
+send_gdb "print obj_with_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{priv_enum = red, x = 0\\}.*$gdb_prompt $" { pass "print obj_with_enum (1)" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum (1)" }
+   timeout                             { fail "(timeout) print obj_with_enum (1)" }
+}
+
+send_gdb "next\n"   
+gdb_expect {   
+   -re "$gdb_prompt $"                     { pass "next" }
+   timeout                             { fail "(timeout) next" }
+}
+
+# print the object again
+send_gdb "print obj_with_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{priv_enum = green, x = 0\\}.*$gdb_prompt $" { pass "print obj_with_enum (2)" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum (2)" }
+   timeout                             { fail "(timeout) print obj_with_enum (2)" }
+}
+
+# print out the enum member
+send_gdb "print obj_with_enum.priv_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = green.*$gdb_prompt $" { pass "print obj_with_enum.priv_enum" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum.priv_enum" }
+   timeout                             { fail "(timeout) print obj_with_enum.priv_enum" }
+}
+
+# ptype on the enum member
+send_gdb "ptype obj_with_enum.priv_enum\n"   
+gdb_expect {   
+   -re "type = enum ClassWithEnum::PrivEnum \\{red, green, blue, yellow = 42\\}.*$gdb_prompt $" { pass "ptype obj_with_enum.priv_enum" }
+   -re "$gdb_prompt $"                     { fail "ptype obj_with_enum.priv_enum" }
+   timeout                             { fail "(timeout) ptype obj_with_enum.priv_enum" }
+}
+
+# ptype on the object
+send_gdb "ptype obj_with_enum\n"   
+gdb_expect {   
+   -re "type = class ClassWithEnum \\{\r\n\[ \t\]*public:\r\n\[ \t\]*enum ClassWithEnum::PrivEnum priv_enum;\r\n\[ \t\]*int x;\r\n\\}\r\n$gdb_prompt $" { pass "ptype obj_with_enum" }
+   -re "$gdb_prompt $"                     { fail "ptype obj_with_enum" }
+   timeout                             { fail "(timeout) ptype obj_with_enum" }
+}
+
+send_gdb "print (ClassWithEnum::PrivEnum) 42\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = yellow.*$gdb_prompt $" { pass "print (ClassWithEnum::PrivEnum) 42" }
+   -re "$gdb_prompt $"                     { fail "print (ClassWithEnum::PrivEnum) 42" }
+   timeout                             { fail "(timeout) print (ClassWithEnum::PrivEnum) 42" }
+}
+
+
+send_gdb "maint demangle inheritance1__Fv\n"
+gdb_expect {
+   -re "inheritance1\\(void\\).*$gdb_prompt $" { pass "demangle" }
+   -re ".*$gdb_prompt $"   { fail "demangle" }
+   timeout           { fail "(timeout) demangle" }
+}
+
diff --git a/gdb/testsuite/gdb.c++/compiler.cc b/gdb/testsuite/gdb.c++/compiler.cc
new file mode 100644
index 0000000..aa35c75
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/compiler.cc
@@ -0,0 +1,34 @@
+/* Often the behavior of any particular test depends upon what compiler was
+   used to compile the test.  As each test is compiled, this file is
+   preprocessed by the same compiler used to compile that specific test
+   (different tests might be compiled by different compilers, particularly
+   if compiled at different times), and used to generate a *.ci (compiler
+   info) file for that test.
+
+   I.E., when callfuncs is compiled, a callfuncs.ci file will be generated,
+   which can then be sourced by callfuncs.exp to give callfuncs.exp access
+   to information about the compilation environment.
+
+   TODO:  It might be a good idea to add expect code that tests each
+   definition made with 'set" to see if one already exists, and if so
+   warn about conflicts if it is being set to something else.  */
+
+#if defined(__GNUC__) && __GNUC__ >= 2 && __GNUC_MINOR__ >= 6
+set supports_template_debugging 1
+#else
+set supports_template_debugging 0
+#endif
+
+#if defined(__cplusplus) 
+set supports_template_debugging 1
+#else
+set supports_template_debugging 0
+#endif
+
+#if defined (__GNUC__)
+set gcc_compiled __GNUC__
+#else
+set gcc_compiled 0
+#endif
+
+return 0
diff --git a/gdb/testsuite/gdb.c++/configure b/gdb/testsuite/gdb.c++/configure
new file mode 100644
index 0000000..6d0b517
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=cplusfuncs.cc
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.c++/configure.in b/gdb/testsuite/gdb.c++/configure.in
new file mode 100644
index 0000000..f989cb8
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/configure.in
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(cplusfuncs.cc)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.c++/cplusfuncs.cc b/gdb/testsuite/gdb.c++/cplusfuncs.cc
new file mode 100644
index 0000000..924cf54
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/cplusfuncs.cc
@@ -0,0 +1,185 @@
+#include <stddef.h>
+
+class foo {
+public:
+  foo  (int);
+  foo  (int, const char *);
+  foo  (foo&);
+  ~foo ();
+
+  void  operator *      (foo&);
+  void  operator %      (foo&);
+  void  operator -      (foo&);
+  void  operator >>     (foo&);
+  void  operator !=     (foo&);
+  void  operator >      (foo&);
+  void  operator >=     (foo&);
+  void  operator |      (foo&);
+  void  operator &&     (foo&);
+  void  operator !      (void);
+  void  operator ++     (int);
+  void  operator =      (foo&);
+  void  operator +=     (foo&);
+  void  operator *=     (foo&);
+  void  operator %=     (foo&);
+  void  operator >>=    (foo&);
+  void  operator |=     (foo&);
+  void  operator ,      (foo&);
+  void  operator /      (foo&);
+  void  operator +      (foo&);
+  void  operator <<     (foo&);
+  void  operator ==     (foo&);
+  void  operator <      (foo&);
+  void  operator <=     (foo&);
+  void  operator &      (foo&);
+  void  operator ^      (foo&);
+  void  operator ||     (foo&);
+  void  operator ~      (void);
+  void  operator --     (int);
+  void  operator ->     (void);
+  void  operator -=     (foo&);
+  void  operator /=     (foo&);
+  void  operator <<=    (foo&);
+  void  operator &=     (foo&);
+  void  operator ^=     (foo&);
+  void  operator ->*    (foo&);
+  void  operator []     (foo&);
+  void  operator ()     (foo&);
+  void* operator new    (size_t);
+  void  operator delete (void *);
+  /**/  operator int    ();
+  /**/  operator char*  ();
+
+  int foofunc (int); // forced to have int return type, which is required
+  int foofunc (int, signed char *); // forced to have int return type, which is required
+  int ifoo;
+  const char *ccpfoo;
+};
+
+#ifdef usestubs
+extern "C" { 
+   void set_debug_traps();
+   void breakpoint();
+};
+#endif
+
+main () {
+#ifdef usestubs
+   set_debug_traps();
+   breakpoint();
+#endif
+   int z=3;
+}
+
+foo::foo  (int i)                  { ifoo = i;}
+foo::foo  (int i, const char *ccp) { ifoo = i; ccpfoo = ccp; }
+foo::foo  (foo& afoo)              { afoo.ifoo = 0; }
+foo::~foo ()                       {}
+
+void  foo::operator *      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator %      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator -      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator >>     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator !=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator >      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator >=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator |      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator &&     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator !      (void) {}
+void  foo::operator ++     (int ival) { ival = 0; }
+void  foo::operator =      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator +=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator *=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator %=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator >>=    (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator |=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ,      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator /      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator +      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator <<     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ==     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator <      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator <=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator &      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ^      (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ||     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ~      (void) {}
+void  foo::operator --     (int ival) { ival = 0; }
+void  foo::operator ->     (void) {}
+void  foo::operator -=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator /=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator <<=    (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator &=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ^=     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ->*    (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator []     (foo& afoo) { afoo.ifoo = 0; }
+void  foo::operator ()     (foo& afoo) { afoo.ifoo = 0; }
+void* foo::operator new    (size_t ival) { ival = 0; return 0; }
+void  foo::operator delete (void *ptr) { ptr = 0; }
+/**/  foo::operator int    () { return 0; }
+/**/  foo::operator char*  () { return 0; }
+
+/* Some functions to test overloading by varying one argument type. */
+
+void overload1arg (void)		{          }
+void overload1arg (char arg)		{ arg = 0; }
+void overload1arg (signed char arg)	{ arg = 0; }
+void overload1arg (unsigned char arg)	{ arg = 0; }
+void overload1arg (short arg)		{ arg = 0; }
+void overload1arg (unsigned short arg)	{ arg = 0; }
+void overload1arg (int arg)		{ arg = 0; }
+void overload1arg (unsigned int arg)	{ arg = 0; }
+void overload1arg (long arg)		{ arg = 0; }
+void overload1arg (unsigned long arg)	{ arg = 0; }
+void overload1arg (float arg)		{ arg = 0; }
+void overload1arg (double arg)		{ arg = 0; }
+
+/* Some functions to test overloading by varying argument count. */
+
+void overloadargs (int a1)				{ a1 = 0; }
+void overloadargs (int a1, int a2)			{ a1 = a2 = 0; }
+void overloadargs (int a1, int a2, int a3)		{ a1 = a2 = a3 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4)
+			{ a1 = a2 = a3 = a4 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5)
+			{ a1 = a2 = a3 = a4 = a5 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+		   int a8)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+		   int a8, int a9)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+		   int a8, int a9, int a10)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+			  a10 = 0; }
+void overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+		   int a8, int a9, int a10, int a11)
+			{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+			  a10 = a11 == 0; }
+
+/* Some hairy function definitions.
+   Use typedefs to help maintain sanity. */
+
+typedef int   (*PFPc_i)(char *);
+typedef short (*PFPl_s)(long *);
+typedef short (*PFPc_s)(char *);
+typedef int   (*PFl_i)(long);
+typedef PFl_i (*PFPc_PFl_i)(char *);
+typedef PFl_i (*PFPi_PFl_i)(int *);
+typedef PFl_i (*PFPFPc_i_PFl_i)(PFPc_i);
+typedef PFl_i (*PFs_PFl_i)(short);
+typedef int   (*PFPFPl_s_i)(PFPl_s);
+typedef int   (*PFPFPc_s_i)(PFPc_s);
+
+PFs_PFl_i hairyfunc1 (int arg)			{ arg = 0; return 0; }
+int       hairyfunc2 (PFPc_i arg)		{ arg = 0; return 0; }
+int	  hairyfunc3 (PFPFPl_s_i arg)		{ arg = 0; return 0; }
+int	  hairyfunc4 (PFPFPc_s_i arg)		{ arg = 0; return 0; }
+int	  hairyfunc5 (PFPc_PFl_i arg)		{ arg = 0; return 0; }
+int	  hairyfunc6 (PFPi_PFl_i arg)		{ arg = 0; return 0; }
+int	  hairyfunc7 (PFPFPc_i_PFl_i arg)	{ arg = 0; return 0; }
diff --git a/gdb/testsuite/gdb.c++/cplusfuncs.exp b/gdb/testsuite/gdb.c++/cplusfuncs.exp
new file mode 100644
index 0000000..e36d379
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/cplusfuncs.exp
@@ -0,0 +1,300 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "cplusfuncs"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+#  Cause gdb to lookup a specific C++ function and print the demangled
+#  form.
+#
+
+proc info_func { regex demangled } {
+    global gdb_prompt
+
+    send_gdb "info function $regex\n"
+    gdb_expect {
+	-re "File .*:\r\n$demangled\r\n$gdb_prompt $" {
+	    pass "info function for \"$regex\""
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "info function for \"$regex\""
+	}
+	timeout {
+	    fail "info function for \"$regex\" (timeout)"
+	}
+    }
+}
+
+#
+#  Run print &'$arg' on the input arg and verify that we can correctly
+#  lookup the fully qualified C++ function.
+#  We ignore the return type of the function since we are only interested
+#  in the rootname and arguments part.
+#
+
+proc print_addr_of { arg } {
+    global gdb_prompt
+    global hex
+
+    set pattern [string_to_regexp $arg]
+    send_gdb "print &'$arg'\n"
+    gdb_expect {
+	-re ".* = .* $hex <$pattern>\r\n$gdb_prompt $" { pass "print &'$arg'" }
+	-re ".*$gdb_prompt $" {
+	    fail "print &'$arg'"
+	}
+	timeout {
+	    fail "print &'$arg' (timeout)"
+	}
+    }
+}
+
+#
+# Test name demangling for operators.
+#
+# The '(' at the end of each regex input pattern is so that we match only
+# the one we are looking for.  I.E. "operator&" would match both
+# "operator&(foo &)" and "operator&&(foo &)".
+#
+
+proc test_lookup_operator_functions {} {
+
+    # These tests don't work for COFF targets; don't even try them
+    if [istarget "a29k-*-udi"] then {
+	setup_xfail "a29k-*-udi"
+	fail "skipping operator tests"
+	return
+    }
+
+    info_func "operator&&("  "void foo::operator&&\\(foo &\\);"
+    info_func "operator&=("  "void foo::operator&=\\(foo &\\);"
+    info_func "operator&("  "void foo::operator&\\(foo &\\);"
+    info_func "operator/=("  "void foo::operator/=\\(foo &\\);"
+    info_func "operator^=("  "void foo::operator.=\\(foo &\\);"
+    info_func "operator<<=("  "void foo::operator<<=\\(foo &\\);"
+    info_func "operator%=("  "void foo::operator%=\\(foo &\\);"
+    info_func "operator-=("  "void foo::operator-=\\(foo &\\);"
+
+    # There doesn't appear to be any way to get GDB to treat '*' as a
+    # character to match, rather than as a regex special character.
+    setup_xfail "*-*-*"
+    info_func "operator\*=("  "void foo::operator\\*=\\(foo &\\);"
+
+    info_func "operator|=("  "void foo::operator\\|=\\(foo &\\);"
+    info_func "operator+=("  "void foo::operator.=\\(foo &\\);"
+    info_func "operator>>=("  "void foo::operator\>\>=\\(foo &\\);"
+    info_func "operator=("  "void foo::operator=\\(foo &\\);"
+    info_func "operator()("  "void foo::operator\\(\\)\\(foo &\\);"
+
+    # The function should be "operator," not "operator, ".  (note space)
+    # This test will work; I've commented it out because it should not
+    # count as a pass, since it is incorrect.  Ian Taylor.
+    # info_func "operator, ("  "void foo::operator, \\(foo &\\);"
+    setup_xfail "*-*-*"
+    info_func "operator,("  "void foo::operator,\\(foo &\\);"
+
+    info_func "operator~("  "void foo::operator~\\(void\\);"
+    info_func "operator delete("  "void foo::operator delete\\(void \\*\\);"
+    info_func "operator/("  "void foo::operator/\\(foo &\\);"
+    info_func "operator==("  "void foo::operator==\\(foo &\\);"
+    info_func "operator^("  "void foo::operator\\^\\(foo &\\);"
+
+    info_func "operator>=("  "void foo::operator>=\\(foo &\\);"
+    info_func "operator>("  "void foo::operator>\\(foo &\\);"
+    info_func "operator<=("  "void foo::operator<=\\(foo &\\);"
+    info_func "operator<<("  "void foo::operator<<\\(foo &\\);"
+    info_func "operator<("  "void foo::operator<\\(foo &\\);"
+    info_func "operator%("  "void foo::operator%\\(foo &\\);"
+    info_func "operator-("  "void foo::operator-\\(foo &\\);"
+
+    # There doesn't appear to be anyway to get '*' treated as a character
+    # to match, rather than as a regex special character.
+    setup_xfail "*-*-*"
+    info_func "operator\*("  "void foo::operator\\*\\(foo &\\);"
+
+    info_func "operator--("  "void foo::operator--\\(int\\);"
+    info_func "operator!=("  "void foo::operator!=\\(foo &\\);"
+    info_func "operator!("  "void foo::operator!\\(void\\);"
+    info_func "operator new("  "void \\*foo::operator new\\(.*\\);"
+    info_func "operator||("  "void foo::operator\\|\\|\\(foo &\\);"
+    info_func "operator char \\*("  "char \\*foo::operator char \\*\\(void\\);"
+    info_func "operator int("  "int foo::operator int\\(void\\);"
+    info_func "operator|("  "void foo::operator\\|\\(foo &\\);"
+    info_func "operator+("  "void foo::operator\\+\\(foo &\\);"
+    info_func "operator++("  "void foo::operator\\+\\+\\(int\\);"
+    info_func "operator->("  "void foo::operator->\\(void\\);"
+    info_func "operator->\\*("  "void foo::operator->\\*\\(foo &\\);"
+    info_func "operator>>("  "void foo::operator\>\>\\(foo &\\);"
+
+    # GDB says "`operator \[\](' not supported".  I don't know why.
+    setup_xfail "*-*-*"
+    info_func "operator\\\[\\\](" "void foo::operator\\\[\\\]\\(foo &\\);"
+    # But this works, for some reason.
+    info_func ".perator\\\[\\\](" "void foo::operator\\\[\\\]\\(foo &\\);"
+}
+
+
+proc test_paddr_operator_functions {} {
+    global hex
+
+    print_addr_of "foo::operator&&(foo &)"
+    print_addr_of "foo::operator&=(foo &)"
+    print_addr_of "foo::operator&(foo &)"
+    print_addr_of "foo::operator/=(foo &)"
+    print_addr_of "foo::operator^=(foo &)"
+    print_addr_of "foo::operator<<=(foo &)"
+    print_addr_of "foo::operator%=(foo &)"
+    print_addr_of "foo::operator-=(foo &)"
+    print_addr_of "foo::operator*=(foo &)"
+    print_addr_of "foo::operator|=(foo &)"
+    print_addr_of "foo::operator+=(foo &)"
+    print_addr_of "foo::operator>>=(foo &)"
+    print_addr_of "foo::operator=(foo &)"
+    print_addr_of "foo::operator()(foo &)"
+    print_addr_of "foo::operator, (foo &)"
+    print_addr_of "foo::operator~(void)"
+    print_addr_of "foo::operator delete(void *)"
+    print_addr_of "foo::operator/(foo &)"
+    print_addr_of "foo::operator==(foo &)"
+    print_addr_of "foo::operator^(foo &)"
+    print_addr_of "foo::operator>=(foo &)"
+    print_addr_of "foo::operator>(foo &)"
+    print_addr_of "foo::operator<=(foo &)"
+    print_addr_of "foo::operator<<(foo &)"
+    print_addr_of "foo::operator<(foo &)"
+    print_addr_of "foo::operator%(foo &)"
+    print_addr_of "foo::operator-(foo &)"
+    print_addr_of "foo::operator*(foo &)"
+    print_addr_of "foo::operator--(int)"
+    print_addr_of "foo::operator!=(foo &)"
+    print_addr_of "foo::operator!(void)"
+    gdb_test "print &'foo::operator new'" \
+	" = .* $hex <foo::operator new\\(.*\\)>"
+    print_addr_of "foo::operator||(foo &)"
+    print_addr_of "foo::operator char *(void)"
+    print_addr_of "foo::operator int(void)"
+    print_addr_of "foo::operator|(foo &)"
+    print_addr_of "foo::operator+(foo &)"
+    print_addr_of "foo::operator++(int)"
+    print_addr_of "foo::operator->(void)"
+    print_addr_of "foo::operator->*(foo &)"
+    print_addr_of "foo::operator>>(foo &)"
+    gdb_test "print &'foo::operator\[\](foo &)'" \
+	" = .*0x\[0-9a-f\]+ <foo::operator\\\[\\\]\\(foo &\\)>"
+}
+
+#
+# Test overloaded functions (1 arg).
+#
+
+proc test_paddr_overloaded_functions {} {
+    print_addr_of "overload1arg(signed char)"
+    print_addr_of "overload1arg(unsigned char)"
+    print_addr_of "overload1arg(unsigned int)"
+    print_addr_of "overload1arg(unsigned long)"
+    print_addr_of "overload1arg(unsigned short)"
+    print_addr_of "overload1arg(char)"
+    print_addr_of "overload1arg(double)"
+    print_addr_of "overload1arg(float)"
+    print_addr_of "overload1arg(int)"
+    print_addr_of "overload1arg(long)"
+    print_addr_of "overload1arg(short)"
+    print_addr_of "overload1arg(void)"
+    print_addr_of "overloadargs(int)"
+    print_addr_of "overloadargs(int, int)"
+    print_addr_of "overloadargs(int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int, int, int, int, int)"
+    print_addr_of "overloadargs(int, int, int, int, int, int, int, int, int, int, int)"
+}
+
+proc test_paddr_hairy_functions {} {
+    print_addr_of "hairyfunc1(int)"
+    print_addr_of "hairyfunc2(int (*)(char *))"
+    print_addr_of "hairyfunc3(int (*)(short (*)(long *)))"
+    print_addr_of "hairyfunc4(int (*)(short (*)(char *)))"
+    print_addr_of "hairyfunc5(int (*(*)(char *))(long))"
+    print_addr_of "hairyfunc6(int (*(*)(int *))(long))"
+    print_addr_of "hairyfunc7(int (*(*)(int (*)(char *)))(long))"
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+
+    # Get the debug format for the compiled test case.  If that
+    # format is DWARF 1 then just skip all the tests since none of
+    # them will pass.
+
+    if [ runto_main] then {
+	get_debug_format
+	if [ setup_xfail_format "DWARF 1" ] then {
+	    fail "C++ tests skipped due to limited C++ support in DWARF 1 debug format"
+	    return
+	}
+	clear_xfail "*-*-*"
+    }
+
+    test_paddr_overloaded_functions
+    test_paddr_operator_functions
+    test_paddr_hairy_functions
+    test_lookup_operator_functions
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.c++/demangle.exp b/gdb/testsuite/gdb.c++/demangle.exp
new file mode 100644
index 0000000..fd1d344
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/demangle.exp
@@ -0,0 +1,1517 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+#
+#  Test gnu style name demangling
+#
+
+proc test_gnu_style_demangling {} {
+    global gdb_prompt
+
+    # Set the demangling style to "gnu" and then check to make sure
+    # it really got set.  Return if the style failed to get set for
+    # some reason.
+
+    send_gdb "set demangle-style gnu\n"
+    gdb_expect {
+	-re "set demangle-style gnu\[\r\n\]+$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "set demangle-style gnu failed" ; return }
+	timeout { fail "set demangle-style gnu failed (timeout)" ; return }
+    }
+
+    send_gdb "show demangle-style\n"
+    gdb_expect {
+	-re "The current C\[+\]+ demangling style is \"gnu\".\r\n$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "demangling style not set to gnu" }
+	timeout { fail "show demangle-style timed out" }
+    }
+
+    gdb_test "maint dem Abort__FP6EditoriPCc" \
+	"Abort\[(\]+Editor \[*\]+, int, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle AddAlignment__9ivTSolverUiP12ivInteractorP7ivTGlue" "ivTSolver::AddAlignment(unsigned int, ivInteractor *, ivTGlue *)"
+    gdb_test "maint dem Append__15NameChooserViewPCc" \
+	"NameChooserView::Append\[(\]+(const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle ArrowheadIntersects__9ArrowLineP9ArrowheadR6BoxObjP7Graphic" "ArrowLine::ArrowheadIntersects(Arrowhead *, BoxObj &, Graphic *)"
+    gdb_test_exact "maint demangle AtEnd__13ivRubberGroup" "ivRubberGroup::AtEnd(void)"
+    gdb_test_exact "maint demangle BgFilter__9ivTSolverP12ivInteractor" "ivTSolver::BgFilter(ivInteractor *)"
+    gdb_test "maint dem BitPatterntoa__FRC10BitPatternccc" \
+	"BitPatterntoa\[(\]+(const BitPattern|BitPattern const) &, char, char, char\[)\]+"
+    gdb_test_exact "maint demangle Check__6UArrayi" "UArray::Check(int)"
+    gdb_test_exact "maint demangle CoreConstDecls__8TextCodeR7ostream" "TextCode::CoreConstDecls(ostream &)"
+    gdb_test_exact "maint demangle Detach__8StateVarP12StateVarView" "StateVar::Detach(StateVarView *)"
+    gdb_test_exact "maint demangle Done__9ComponentG8Iterator" "Component::Done(Iterator)"
+    gdb_test "maint dem DrawDestinationTransformedImage__FP7_XImageiiT0iiUlUiiiUiUlUlP4_XGCRC13ivTransformeriiii" \
+	"DrawDestinationTransformedImage\[(\]+_XImage \[*\]+, int, int, _XImage \[*\]+, int, int, unsigned long, unsigned int, int, int, unsigned int, unsigned long, unsigned long, _XGC \[*\]+, (const ivTransformer|ivTransformer const) &, int, int, int, int\[)\]+"
+
+    gdb_test "maint dem Edit__12StringEditorPCcii" \
+	"StringEditor::Edit\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+    gdb_test_exact "maint demangle Effect__11RelateManipR7ivEvent" "RelateManip::Effect(ivEvent &)"
+    gdb_test "maint dem FilterName__FPCc" \
+	"FilterName\[(\]+(const char|char const) \[*\]+\[)\]+"
+    gdb_test "maint dem Filter__6PSTextPCci" \
+	"PSText::Filter\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+    gdb_test "maint dem FindColor__7CatalogPCciii" \
+	"Catalog::FindColor\[(\]+(const char|char const) \[*\]+, int, int, int\[)\]+"
+    gdb_test_exact "maint demangle FindFixed__FRP4CNetP4CNet" "FindFixed(CNet *&, CNet *)"
+    gdb_test "maint dem FindFont__7CatalogPCcN21" \
+	"Catalog::FindFont\[(\]+(const char|char const) \[*\]+, (const char|char const) \[*\]+, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle Fix48_abort__FR8twolongs" "Fix48_abort(twolongs &)"
+    gdb_test_exact "maint demangle GetBarInfo__15iv2_6_VScrollerP13ivPerspectiveRiT2" "iv2_6_VScroller::GetBarInfo(ivPerspective *, int &, int &)"
+    gdb_test_exact "maint demangle GetBgColor__C9ivPainter" "ivPainter::GetBgColor(void) const"
+
+    gdb_test "maint dem Iisdouble__FPC6IntRep" \
+	"Iisdouble\[(\]+(const IntRep|IntRep const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle InsertBody__15H_PullrightMenuii" "H_PullrightMenu::InsertBody(int, int)"
+    gdb_test_exact "maint demangle InsertCharacter__9TextManipc" "TextManip::InsertCharacter(char)"
+
+    gdb_test_exact "maint demangle InsertToplevel__7ivWorldP12ivInteractorT1" "ivWorld::InsertToplevel(ivInteractor *, ivInteractor *)"
+    gdb_test_exact "maint demangle InsertToplevel__7ivWorldP12ivInteractorT1iiUi" "ivWorld::InsertToplevel(ivInteractor *, ivInteractor *, int, int, unsigned int)"
+    gdb_test "maint dem IsADirectory__FPCcR4stat" \
+	"IsADirectory\[(\]+(const char|char const) \[*\]+, stat &\[)\]+"
+    gdb_test_exact "maint demangle IsAGroup__FP11GraphicViewP11GraphicComp" "IsAGroup(GraphicView *, GraphicComp *)"
+    gdb_test_exact "maint demangle IsA__10ButtonCodeUl" "ButtonCode::IsA(unsigned long)"
+
+    gdb_test_exact "maint demangle ReadName__FR7istreamPc" "ReadName(istream &, char *)"
+    gdb_test_exact "maint demangle Redraw__13StringBrowseriiii" "StringBrowser::Redraw(int, int, int, int)"
+    gdb_test_exact "maint demangle Rotate__13ivTransformerf" "ivTransformer::Rotate(float)"
+    gdb_test_exact "maint demangle Rotated__C13ivTransformerf" "ivTransformer::Rotated(float) const"
+    gdb_test_exact "maint demangle Round__Ff" "Round(float)"
+
+    gdb_test_exact "maint demangle SetExport__16MemberSharedNameUi" "MemberSharedName::SetExport(unsigned int)"
+    gdb_test_exact "maint demangle Set__14ivControlState13ControlStatusUi" "ivControlState::Set(ControlStatus, unsigned int)"
+    gdb_test_exact "maint demangle Set__5DFacePcii" "DFace::Set(char *, int, int)"
+
+    gdb_test_exact "maint demangle VConvert__9ivTSolverP12ivInteractorRP8TElementT2" "ivTSolver::VConvert(ivInteractor *, TElement *&, TElement *&)"
+    gdb_test_exact "maint demangle VConvert__9ivTSolverP7ivTGlueRP8TElement" "ivTSolver::VConvert(ivTGlue *, TElement *&)"
+    gdb_test_exact "maint demangle VOrder__9ivTSolverUiRP12ivInteractorT2" "ivTSolver::VOrder(unsigned int, ivInteractor *&, ivInteractor *&)"
+    gdb_test "maint dem Valid__7CatalogPCcRP4Tool" \
+	"Catalog::Valid\[(\]+(const char|char const) \[*\]+, Tool \[*\]+&\[)\]+"
+    gdb_test_exact "maint demangle _10PageButton\$__both" "PageButton::__both"
+    gdb_test_exact "maint demangle _3RNG\$singleMantissa" "RNG::singleMantissa"
+    gdb_test_exact "maint demangle _5IComp\$_release" "IComp::_release"
+    gdb_test_exact "maint demangle _\$_10BitmapComp" "BitmapComp::~BitmapComp(void)"
+
+    gdb_test_exact "maint demangle _\$_9__io_defs" "__io_defs::~__io_defs(void)"
+    gdb_test_exact "maint demangle _\$_Q23foo3bar" "foo::bar::~bar(void)"
+    gdb_test_exact "maint demangle _\$_Q33foo3bar4bell" "foo::bar::bell::~bell(void)"
+    gdb_test_exact "maint demangle __10ivTelltaleiP7ivGlyph" "ivTelltale::ivTelltale(int, ivGlyph *)"
+    gdb_test_exact "maint demangle __10ivViewportiP12ivInteractorUi" "ivViewport::ivViewport(int, ivInteractor *, unsigned int)"
+    gdb_test_exact "maint demangle __10ostrstream" "ostrstream::ostrstream(void)"
+    gdb_test_exact "maint demangle __10ostrstreamPcii" "ostrstream::ostrstream(char *, int, int)"
+    gdb_test "maint dem __11BasicDialogiPCcP13ivButtonStateN22Ui" \
+	"BasicDialog::BasicDialog\[(\]+int, (const char|char const) \[*\]+, ivButtonState \[*\]+, (const char|char const) \[*\]+, (const char|char const) \[*\]+, unsigned int\[)\]+"
+    gdb_test_exact "maint demangle __11BitmapTablei" "BitmapTable::BitmapTable(int)"
+    gdb_test_exact "maint demangle __12ViewportCodeP12ViewportComp" "ViewportCode::ViewportCode(ViewportComp *)"
+    gdb_test "maint dem __12iv2_6_BorderiPCci" \
+	"iv2_6_Border::iv2_6_Border\[(\]+int, (const char|char const) \[*\]+, int\[)\]+"
+    gdb_test_exact "maint demangle __12iv2_6_Borderii" "iv2_6_Border::iv2_6_Border(int, int)"
+    gdb_test "maint dem __12ivBackgroundiP7ivGlyphPC7ivColor" \
+	"ivBackground::ivBackground\[(\]+int, ivGlyph \[*\]+, (const ivColor|ivColor const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle __12ivBreak_Listl" "ivBreak_List::ivBreak_List(long)"
+    gdb_test "maint dem __14TextInteractoriPCcUi" \
+	"TextInteractor::TextInteractor\[(\]+int, (const char|char const) \[*\]+, unsigned int\[)\]+"
+    gdb_test_exact "maint demangle __14iv2_6_MenuItemiP12ivInteractor" "iv2_6_MenuItem::iv2_6_MenuItem(int, ivInteractor *)"
+    gdb_test "maint dem __14iv2_6_MenuItemiPCcP12ivInteractor" \
+	"iv2_6_MenuItem::iv2_6_MenuItem\[(\]+int, (const char|char const) \[*\]+, ivInteractor \[*\]+\[)\]+"
+
+    gdb_test_exact "maint demangle __20DisplayList_IteratorR11DisplayList" "DisplayList_Iterator::DisplayList_Iterator(DisplayList &)"
+    gdb_test_exact "maint demangle __3fooRT0" "foo::foo(foo &)"
+    gdb_test_exact "maint demangle __3fooiN31" "foo::foo(int, int, int, int)"
+    gdb_test "maint dem __3fooiPCc" \
+	"foo::foo\[(\]+int, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle __3fooiRT0iT2iT2" "foo::foo(int, foo &, int, foo &, int, foo &)"
+    gdb_test "maint dem __6GetOptiPPcPCc" \
+	"GetOpt::GetOpt\[(\]+int, char \[*\]+\[*\]+, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle __6KeyMapPT0" "KeyMap::KeyMap(KeyMap *)"
+    gdb_test "maint dem __7ivWorldPCcRiPPcPC12ivOptionDescPC14ivPropertyData" \
+	"ivWorld::ivWorld\[(\]+(const char|char const) \[*\]+, int &, char \[*\]+\[*\]+, (const ivOptionDesc|ivOptionDesc const) \[*\]+, (const ivPropertyData|ivPropertyData const) \[*\]+\[)\]+"
+    gdb_test "maint dem __7procbufPCci" \
+	"procbuf::procbuf\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+    gdb_test_exact "maint demangle __8ArrowCmdP6EditorUiUi" "ArrowCmd::ArrowCmd(Editor *, unsigned int, unsigned int)"
+
+    gdb_test_exact "maint demangle __9F_EllipseiiiiP7Graphic" "F_Ellipse::F_Ellipse(int, int, int, int, Graphic *)"
+    gdb_test_exact "maint demangle __9FrameDataP9FrameCompi" "FrameData::FrameData(FrameComp *, int)"
+    gdb_test_exact "maint demangle __9HVGraphicP9CanvasVarP7Graphic" "HVGraphic::HVGraphic(CanvasVar *, Graphic *)"
+    gdb_test_exact "maint demangle __Q23foo3bar" "foo::bar::bar(void)"
+    gdb_test_exact "maint demangle __Q33foo3bar4bell" "foo::bar::bell::bell(void)"
+    gdb_test_exact "maint demangle __aa__3fooRT0" "foo::operator&&(foo &)"
+    gdb_test_exact "maint demangle __aad__3fooRT0" "foo::operator&=(foo &)"
+    gdb_test_exact "maint demangle __ad__3fooRT0" "foo::operator&(foo &)"
+    gdb_test_exact "maint demangle __adv__3fooRT0" "foo::operator/=(foo &)"
+    gdb_test_exact "maint demangle __aer__3fooRT0" "foo::operator^=(foo &)"
+    gdb_test_exact "maint demangle __als__3fooRT0" "foo::operator<<=(foo &)"
+    gdb_test_exact "maint demangle __amd__3fooRT0" "foo::operator%=(foo &)"
+    gdb_test_exact "maint demangle __ami__3fooRT0" "foo::operator-=(foo &)"
+    gdb_test_exact "maint demangle __aml__3FixRT0" "Fix::operator*=(Fix &)"
+    gdb_test_exact "maint demangle __aml__5Fix16i" "Fix16::operator*=(int)"
+    gdb_test_exact "maint demangle __aml__5Fix32RT0" "Fix32::operator*=(Fix32 &)"
+    gdb_test_exact "maint demangle __aor__3fooRT0" "foo::operator|=(foo &)"
+    gdb_test_exact "maint demangle __apl__3fooRT0" "foo::operator+=(foo &)"
+    gdb_test_exact "maint demangle __ars__3fooRT0" "foo::operator>>=(foo &)"
+
+    gdb_test_exact "maint demangle __as__3fooRT0" "foo::operator=(foo &)"
+    gdb_test_exact "maint demangle __cl__3fooRT0" "foo::operator()(foo &)"
+    gdb_test_exact "maint demangle __cl__6Normal" "Normal::operator()(void)"
+    gdb_test_exact "maint demangle __cl__6Stringii" "String::operator()(int, int)"
+    gdb_test_exact "maint demangle __cm__3fooRT0" "foo::operator, (foo &)"
+    gdb_test_exact "maint demangle __co__3foo" "foo::operator~(void)"
+    gdb_test_exact "maint demangle __dl__3fooPv" "foo::operator delete(void *)"
+    gdb_test_exact "maint demangle __dv__3fooRT0" "foo::operator/(foo &)"
+    gdb_test_exact "maint demangle __eq__3fooRT0" "foo::operator==(foo &)"
+    gdb_test_exact "maint demangle __er__3fooRT0" "foo::operator^(foo &)"
+    gdb_test_exact "maint demangle __ge__3fooRT0" "foo::operator>=(foo &)"
+    gdb_test_exact "maint demangle __gt__3fooRT0" "foo::operator>(foo &)"
+    gdb_test_exact "maint demangle __le__3fooRT0" "foo::operator<=(foo &)"
+    gdb_test_exact "maint demangle __ls__3fooRT0" "foo::operator<<(foo &)"
+    gdb_test_exact "maint demangle __ls__FR7ostreamPFR3ios_R3ios" "operator<<(ostream &, ios &(*)(ios &))"
+    gdb_test_exact "maint demangle __ls__FR7ostreamR3Fix" "operator<<(ostream &, Fix &)"
+    gdb_test_exact "maint demangle __lt__3fooRT0" "foo::operator<(foo &)"
+    gdb_test_exact "maint demangle __md__3fooRT0" "foo::operator%(foo &)"
+    gdb_test_exact "maint demangle __mi__3fooRT0" "foo::operator-(foo &)"
+    gdb_test_exact "maint demangle __ml__3fooRT0" "foo::operator*(foo &)"
+    gdb_test_exact "maint demangle __mm__3fooi" "foo::operator--(int)"
+
+    gdb_test_exact "maint demangle __ne__3fooRT0" "foo::operator!=(foo &)"
+    gdb_test "maint dem __ne__FRC7ComplexT0" \
+	"operator!=\[(\]+(const Complex|Complex const) &, (const Complex|Complex const) &\[)\]+"
+    gdb_test "maint dem __ne__FRC7Complexd" \
+	"operator!=\[(\]+(const Complex|Complex const) &, double\[)\]+"
+    gdb_test "maint dem __ne__FRC9SubStringRC6String" \
+	"operator!=\[(\]+(const SubString|SubString const) &, (const String|String const) &\[)\]+"
+    gdb_test_exact "maint demangle __nt__3foo" "foo::operator!(void)"
+    gdb_test_exact "maint demangle __nw__3fooi" "foo::operator new(int)"
+    gdb_test_exact "maint demangle __oo__3fooRT0" "foo::operator||(foo &)"
+    gdb_test_exact "maint demangle __opPc__3foo" "foo::operator char *(void)"
+    gdb_test_exact "maint demangle __opi__3foo" "foo::operator int(void)"
+    gdb_test_exact "maint demangle __or__3fooRT0" "foo::operator|(foo &)"
+    gdb_test_exact "maint demangle __pl__3fooRT0" "foo::operator+(foo &)"
+    gdb_test_exact "maint demangle __pp__3fooi" "foo::operator++(int)"
+    gdb_test_exact "maint demangle __rf__3foo" "foo::operator->(void)"
+    gdb_test_exact "maint demangle __rm__3fooRT0" "foo::operator->*(foo &)"
+    gdb_test_exact "maint demangle __rs__3fooRT0" "foo::operator>>(foo &)"
+    gdb_test "maint dem __vc__3fooRT0" "foo::operator\\\[\\\]\\(foo &\\)"
+    gdb_test "maint dem _gsub__6StringRC5RegexPCci" \
+	"String::_gsub\[(\]+(const Regex|Regex const) &, (const char|char const) \[*\]+, int\[)\]+"
+    gdb_test_exact "maint demangle _new_Fix__FUs" "_new_Fix(unsigned short)"
+
+    # gcc 2.4.5 (and earlier) style virtual tables.  We want to continue to
+    # correctly demangle these even if newer compilers use a different form.
+    gdb_test_exact "maint demangle _vt.foo" "foo virtual table"
+    gdb_test_exact "maint demangle _vt.foo.bar" "foo::bar virtual table"
+    gdb_test_exact "maint demangle _vt\$foo" "foo virtual table"
+    gdb_test_exact "maint demangle _vt\$foo\$bar" "foo::bar virtual table"
+
+    gdb_test_exact "maint demangle append__7ivGlyphPT0" "ivGlyph::append(ivGlyph *)"
+    gdb_test "maint dem arg__FRC7Complex" \
+	"arg\[(\]+(const Complex|Complex const) &\[)\]+"
+    gdb_test_exact "maint demangle clearok__FP7_win_sti" "clearok(_win_st *, int)"
+
+    gdb_test_exact "maint demangle complexfunc2__FPFPc_i" "complexfunc2(int (*)(char *))"
+    gdb_test_exact "maint demangle complexfunc3__FPFPFPl_s_i" "complexfunc3(int (*)(short (*)(long *)))"
+    gdb_test_exact "maint demangle complexfunc4__FPFPFPc_s_i" "complexfunc4(int (*)(short (*)(char *)))"
+    gdb_test_exact "maint demangle complexfunc5__FPFPc_PFl_i" "complexfunc5(int (*(*)(char *))(long))"
+    gdb_test_exact "maint demangle complexfunc6__FPFPi_PFl_i" "complexfunc6(int (*(*)(int *))(long))"
+    gdb_test_exact "maint demangle complexfunc7__FPFPFPc_i_PFl_i" "complexfunc7(int (*(*)(int (*)(char *)))(long))"
+    gdb_test "maint dem contains__C9BitStringRC10BitPattern" \
+	"BitString::contains\[(\]+(const BitPattern|BitPattern const) &\[)\]+ const"
+    gdb_test "maint dem contains__C9BitStringRC12BitSubStringi" \
+	"BitString::contains\[(\]+(const BitSubString|BitSubString const) &, int\[)\]+ const"
+    gdb_test "maint dem contains__C9BitStringRT0" \
+	"BitString::contains\[(\]+(const BitString|BitString const) &\[)\]+ const"
+    gdb_test "maint dem div__FPC6IntRepT0P6IntRep" \
+	"div\[(\]+(const IntRep|IntRep const) \[*\]+, (const IntRep|IntRep const) \[*\]+, IntRep \[*\]+\[)\]+"
+    gdb_test "maint dem div__FPC6IntReplP6IntRep" \
+	"div\[(\]+(const IntRep|IntRep const) \[*\]+, long, IntRep \[*\]+\[)\]+"
+    gdb_test "maint dem div__FRC8RationalT0R8Rational" \
+	"div\[(\]+(const Rational|Rational const) &, (const Rational|Rational const) &, Rational &\[)\]+"
+    gdb_test "maint dem divide__FRC7IntegerT0R7IntegerT2" \
+	"divide\[(\]+(const Integer|Integer const) &, (const Integer|Integer const) &, Integer &, Integer &\[)\]+"
+    gdb_test "maint dem divide__FRC7IntegerlR7IntegerRl" \
+	"divide\[(\]+(const Integer|Integer const) &, long, Integer &, long &\[)\]+"
+    gdb_test "maint dem enable__14DocumentViewerPCcUi" \
+	"DocumentViewer::enable\[(\]+(const char|char const) \[*\]+, unsigned int\[)\]+"
+
+    gdb_test_exact "maint demangle foo__FiN30" "foo(int, int, int, int)"
+    gdb_test_exact "maint demangle foo__FiR3fooiT1iT1" "foo(int, foo &, int, foo &, int, foo &)"
+    gdb_test_exact "maint demangle foo___3barl" "bar::foo_(long)"
+    gdb_test_exact "maint demangle insert__15ivClippingStacklRP8_XRegion" "ivClippingStack::insert(long, _XRegion *&)"
+    gdb_test_exact "maint demangle insert__16ChooserInfo_ListlR11ChooserInfo" "ChooserInfo_List::insert(long, ChooserInfo &)"
+    gdb_test_exact "maint demangle insert__17FontFamilyRepListlRP15ivFontFamilyRep" "FontFamilyRepList::insert(long, ivFontFamilyRep *&)"
+    gdb_test_exact "maint demangle leaveok__FP7_win_stc" "leaveok(_win_st *, char)"
+    gdb_test_exact "maint demangle left_mover__C7ivMFKitP12ivAdjustableP7ivStyle" "ivMFKit::left_mover(ivAdjustable *, ivStyle *) const"
+    gdb_test "maint dem matches__C9BitStringRC10BitPatterni" \
+	"BitString::matches\[(\]+(const BitPattern|BitPattern const) &, int\[)\]+ const"
+    gdb_test "maint dem matches__C9SubStringRC5Regex" \
+	"SubString::matches\[(\]+(const Regex|Regex const) &\[)\]+ const"
+
+    gdb_test_exact "maint demangle overload1arg__FSc" "overload1arg(signed char)"
+    gdb_test_exact "maint demangle overload1arg__FUc" "overload1arg(unsigned char)"
+    gdb_test_exact "maint demangle overload1arg__FUi" "overload1arg(unsigned int)"
+    gdb_test_exact "maint demangle overload1arg__FUl" "overload1arg(unsigned long)"
+    gdb_test_exact "maint demangle overload1arg__FUs" "overload1arg(unsigned short)"
+    gdb_test_exact "maint demangle overload1arg__Fc" "overload1arg(char)"
+    gdb_test_exact "maint demangle overload1arg__Fd" "overload1arg(double)"
+    gdb_test_exact "maint demangle overload1arg__Ff" "overload1arg(float)"
+    gdb_test_exact "maint demangle overload1arg__Fi" "overload1arg(int)"
+    gdb_test_exact "maint demangle overload1arg__Fl" "overload1arg(long)"
+    gdb_test_exact "maint demangle overload1arg__Fs" "overload1arg(short)"
+    gdb_test_exact "maint demangle overload1arg__Fv" "overload1arg(void)"
+    gdb_test_exact "maint demangle overloadargs__Fi" "overloadargs(int)"
+    gdb_test_exact "maint demangle overloadargs__Fii" "overloadargs(int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiii" "overloadargs(int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiii" "overloadargs(int, int, int, int)"
+
+    gdb_test_exact "maint demangle overloadargs__Fiiiii" "overloadargs(int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiii" "overloadargs(int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiiii" "overloadargs(int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiiiii" "overloadargs(int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiiiiii" "overloadargs(int, int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiiiiiii" "overloadargs(int, int, int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__Fiiiiiiiiiii" "overloadargs(int, int, int, int, int, int, int, int, int, int, int)"
+    gdb_test "maint dem pick__13ivCompositionP8ivCanvasRC12ivAllocationiR5ivHit" \
+	"ivComposition::pick\[(\]+ivCanvas \[*\]+, (const ivAllocation|ivAllocation const) &, int, ivHit &\[)\]+"
+    gdb_test "maint dem pointer__C11ivHScrollerRC7ivEventRC12ivAllocation" \
+	"ivHScroller::pointer\[(\]+(const ivEvent|ivEvent const) &, (const ivAllocation|ivAllocation const) &\[)\]+ const"
+    gdb_test_exact "maint demangle poke__8ivRasterUlUlffff" "ivRaster::poke(unsigned long, unsigned long, float, float, float, float)"
+    gdb_test_exact "maint demangle polar__Fdd" "polar(double, double)"
+    gdb_test "maint dem read__10osStdInputRPCc" \
+	"osStdInput::read\[(\]+(const char|char const) \[*\]+&\[)\]+"
+
+    gdb_test_exact "maint demangle scale__13ivTransformerff" "ivTransformer::scale(float, float)"
+    gdb_test "maint dem scanw__12CursesWindowPCce" \
+	"CursesWindow::scanw\[(\]+(const char|char const) \[*\]+,...\[)\]+"
+    gdb_test "maint dem scmp__FPCcT0" \
+	"scmp\[(\]+(const char|char const) \[*\]+, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle sgetn__7filebufPci" "filebuf::sgetn(char *, int)"
+    gdb_test_exact "maint demangle shift__FP5_FrepiT0" "shift(_Frep *, int, _Frep *)"
+    gdb_test_exact "maint demangle test__C6BitSeti" "BitSet::test(int) const"
+    gdb_test_exact "maint demangle test__C6BitSetii" "BitSet::test(int, int) const"
+    gdb_test "maint dem testbit__FRC7Integerl" \
+	"testbit\[(\]+(const Integer|Integer const) &, long\[)\]+"
+    gdb_test_exact "maint demangle text_source__8Documentl" "Document::text_source(long)"
+    gdb_test_exact "maint demangle variance__6Erlangd" "Erlang::variance(double)"
+    gdb_test "maint dem vform__8iostreamPCcPc" \
+	"iostream::vform\[(\]+(const char|char const) \[*\]+, char \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle view__14DocumentViewerP8ItemViewP11TabularItem" "DocumentViewer::view(ItemView *, TabularItem *)"
+    gdb_test_exact "maint demangle xy_extents__11ivExtensionffff" "ivExtension::xy_extents(float, float, float, float)"
+    gdb_test_exact "maint demangle zero__8osMemoryPvUi" "osMemory::zero(void *, unsigned int)"
+    gdb_test_exact "maint demangle _2T4\$N" "T4::N"
+    gdb_test_exact "maint demangle _Q22T42t1\$N" "T4::t1::N"
+    gdb_test_exact "maint demangle get__2T1" "T1::get(void)"
+    gdb_test_exact "maint demangle get__Q22T11a" "T1::a::get(void)"
+    gdb_test_exact "maint demangle get__Q32T11a1b" "T1::a::b::get(void)"
+    gdb_test_exact "maint demangle get__Q42T11a1b1c" "T1::a::b::c::get(void)"
+    gdb_test_exact "maint demangle get__Q52T11a1b1c1d" "T1::a::b::c::d::get(void)"
+    gdb_test_exact "maint demangle put__2T1i" "T1::put(int)"
+    gdb_test_exact "maint demangle put__Q22T11ai" "T1::a::put(int)"
+    gdb_test_exact "maint demangle put__Q32T11a1bi" "T1::a::b::put(int)"
+    gdb_test_exact "maint demangle put__Q42T11a1b1ci" "T1::a::b::c::put(int)"
+    gdb_test_exact "maint demangle put__Q52T11a1b1c1di" "T1::a::b::c::d::put(int)"
+
+    gdb_test_exact "maint demangle bar__3fooPv"       "foo::bar(void *)"
+    gdb_test "maint dem bar__3fooPCv" \
+	"foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+"
+    gdb_test_exact "maint demangle bar__C3fooPv"      "foo::bar(void *) const"
+    gdb_test "maint dem bar__C3fooPCv" \
+	"foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+ const"
+    gdb_test_exact "maint demangle __eq__3fooRT0"     "foo::operator==(foo &)"
+    gdb_test "maint dem __eq__3fooRC3foo" \
+	 "foo::operator==\[(\]+(const foo|foo const) &\[)\]+"
+    gdb_test_exact "maint demangle __eq__C3fooR3foo"  "foo::operator==(foo &) const"
+    gdb_test "maint dem __eq__C3fooRT0" \
+	   "foo::operator==\[(\]+(const foo|foo const) &\[)\]+ const"
+
+    gdb_test_exact "maint demangle elem__t6vector1Zdi" "vector<double>::elem(int)"
+    gdb_test_exact "maint demangle elem__t6vector1Zii" "vector<int>::elem(int)"
+    gdb_test_exact "maint demangle __t6vector1Zdi"     "vector<double>::vector(int)"
+    gdb_test_exact "maint demangle __t6vector1Zii"     "vector<int>::vector(int)"
+    gdb_test_exact "maint demangle _\$_t6vector1Zdi"    "vector<double>::~vector(int)"
+    gdb_test_exact "maint demangle _\$_t6vector1Zii"    "vector<int>::~vector(int)"
+
+    gdb_test_exact "maint demangle __nw__t2T11ZcUi" "T1<char>::operator new(unsigned int)"
+    gdb_test_exact "maint demangle __nw__t2T11Z1tUi" "T1<t>::operator new(unsigned int)"
+    gdb_test_exact "maint demangle __dl__t2T11ZcPv" "T1<char>::operator delete(void *)"
+    gdb_test_exact "maint demangle __dl__t2T11Z1tPv" "T1<t>::operator delete(void *)"
+    gdb_test_exact "maint demangle __t2T11Zci" "T1<char>::T1(int)"
+    gdb_test_exact "maint demangle __t2T11Zc" "T1<char>::T1(void)"
+    gdb_test_exact "maint demangle __t2T11Z1ti" "T1<t>::T1(int)"
+    gdb_test_exact "maint demangle __t2T11Z1t" "T1<t>::T1(void)"
+
+    gdb_test_exact "maint demangle __Q2t4List1Z10VHDLEntity3Pix" \
+	"List<VHDLEntity>::Pix::Pix(void)"
+
+    gdb_test_exact "maint demangle __Q2t4List1Z10VHDLEntity3PixPQ2t4List1Z10VHDLEntity7element" \
+	"List<VHDLEntity>::Pix::Pix(List<VHDLEntity>::element *)"
+
+    gdb_test_exact "maint demangle __Q2t4List1Z10VHDLEntity3PixRCQ2t4List1Z10VHDLEntity3Pix" \
+	"List<VHDLEntity>::Pix::Pix(List<VHDLEntity>::Pix const &)"
+
+    gdb_test_exact "maint demangle __Q2t4List1Z10VHDLEntity7elementRC10VHDLEntityPT0" \
+	"List<VHDLEntity>::element::element(VHDLEntity const &, List<VHDLEntity>::element *)"
+
+    gdb_test_exact "maint demangle __Q2t4List1Z10VHDLEntity7elementRCQ2t4List1Z10VHDLEntity7element" \
+	"List<VHDLEntity>::element::element(List<VHDLEntity>::element const &)"
+
+    gdb_test_exact "maint demangle __cl__C11VHDLLibraryGt4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntity" \
+	"VHDLLibrary::operator()(PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> >) const"
+
+    gdb_test_exact "maint demangle __cl__Ct4List1Z10VHDLEntityRCQ2t4List1Z10VHDLEntity3Pix" \
+	"List<VHDLEntity>::operator()(List<VHDLEntity>::Pix const &) const"
+
+    gdb_test_exact "maint demangle __ne__FPvRCQ2t4List1Z10VHDLEntity3Pix" \
+	"operator!=(void *, List<VHDLEntity>::Pix const &)"
+
+    gdb_test_exact "maint demangle __ne__FPvRCt4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntity" \
+	"operator!=(void *, PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> > const &)"
+
+    gdb_test_exact "maint demangle __t4List1Z10VHDLEntityRCt4List1Z10VHDLEntity" \
+	"List<VHDLEntity>::List(List<VHDLEntity> const &)"
+
+    gdb_test_exact "maint demangle __t4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntity" \
+	"PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> >::PixX(void)"
+
+    gdb_test_exact "maint demangle __t4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntityP14VHDLLibraryRepGQ2t4List1Z10VHDLEntity3Pix" \
+	"PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> >::PixX(VHDLLibraryRep *, List<VHDLEntity>::Pix)"
+
+    gdb_test_exact "maint demangle __t4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntityRCt4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntity" \
+	"PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> >::PixX(PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> > const &)"
+
+    gdb_test_exact "maint demangle nextE__C11VHDLLibraryRt4PixX3Z11VHDLLibraryZ14VHDLLibraryRepZt4List1Z10VHDLEntity" \
+	"VHDLLibrary::nextE(PixX<VHDLLibrary, VHDLLibraryRep, List<VHDLEntity> > &) const"
+
+    gdb_test_exact "maint demangle next__Ct4List1Z10VHDLEntityRQ2t4List1Z10VHDLEntity3Pix" \
+	"List<VHDLEntity>::next(List<VHDLEntity>::Pix &) const"
+
+    gdb_test_exact "maint demangle _GLOBAL_\$D\$set" "global destructors keyed to set"
+
+    gdb_test_exact "maint demangle _GLOBAL_\$I\$set" "global constructors keyed to set"
+
+    gdb_test_exact "maint demangle __as__t5ListS1ZUiRCt5ListS1ZUi" \
+	"ListS<unsigned int>::operator=(ListS<unsigned int> const &)"
+
+    gdb_test_exact "maint demangle __cl__Ct5ListS1ZUiRCQ2t5ListS1ZUi3Vix" \
+	"ListS<unsigned int>::operator()(ListS<unsigned int>::Vix const &) const"
+
+    gdb_test_exact "maint demangle __cl__Ct5SetLS1ZUiRCQ2t5SetLS1ZUi3Vix" \
+	"SetLS<unsigned int>::operator()(SetLS<unsigned int>::Vix const &) const"
+
+    gdb_test_exact "maint demangle __t10ListS_link1ZUiRCUiPT0" \
+	"ListS_link<unsigned int>::ListS_link(unsigned int const &, ListS_link<unsigned int> *)"
+
+    gdb_test_exact "maint demangle __t10ListS_link1ZUiRCt10ListS_link1ZUi" \
+	"ListS_link<unsigned int>::ListS_link(ListS_link<unsigned int> const &)"
+
+    gdb_test_exact "maint demangle __t5ListS1ZUiRCt5ListS1ZUi" \
+	"ListS<unsigned int>::ListS(ListS<unsigned int> const &)"
+
+    gdb_test_exact "maint demangle next__Ct5ListS1ZUiRQ2t5ListS1ZUi3Vix" \
+	"ListS<unsigned int>::next(ListS<unsigned int>::Vix &) const"
+
+    gdb_test_exact "maint demangle __ne__FPvRCQ2t5SetLS1ZUi3Vix" \
+	"operator!=(void *, SetLS<unsigned int>::Vix const &)"
+    gdb_test_exact "maint demangle __t8ListElem1Z5LabelRt4List1Z5Label" \
+	"ListElem<Label>::ListElem(List<Label> &)"
+    gdb_test_exact "maint demangle __t8BDDHookV1ZPcRCPc" \
+	"BDDHookV<char *>::BDDHookV(char *const &)"
+
+    gdb_test_exact "maint demangle _vt\$t8BDDHookV1ZPc" "BDDHookV<char *> virtual table"
+
+    gdb_test_exact "maint demangle __ne__FPvRCQ211BDDFunction4VixB" \
+	"operator!=(void *, BDDFunction::VixB const &)"
+    gdb_test_exact "maint demangle __eq__FPvRCQ211BDDFunction4VixB" \
+	"operator==(void *, BDDFunction::VixB const &)"
+
+    gdb_test_exact "maint demangle relativeId__CQ36T_phi210T_preserve8FPC_nextRCQ26T_phi210T_preserveRC10Parameters" \
+	 "T_phi2::T_preserve::FPC_next::relativeId(T_phi2::T_preserve const &, Parameters const &) const"
+
+}
+
+#
+#  Test lucid style name demangling
+#
+
+proc test_lucid_style_demangling {} {
+    global gdb_prompt
+
+    # Set the demangling style to "lucid" and then check to make sure
+    # it really got set.  Return if the style failed to get set for
+    # some reason.
+
+    send_gdb "set demangle-style lucid\n"
+    gdb_expect {
+	-re "set demangle-style lucid\[\r\n\]+$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "set demangle-style lucid failed" ; return }
+	timeout { fail "set demangle-style lucid failed (timeout)" ; return }
+    }
+
+    send_gdb "show demangle-style\n"
+    gdb_expect {
+	-re "The current C\[+\]+ demangling style is \"lucid\".\r\n$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "demangling style not set to lucid" }
+	timeout { fail "show demangle-style timed out" }
+    }
+
+    gdb_test_exact "maint demangle WS__FR7istream" "WS(istream &)"
+    gdb_test_exact "maint demangle __aa__3fooFR3foo" "foo::operator&&(foo &)"
+    gdb_test_exact "maint demangle __aad__3fooFR3foo" "foo::operator&=(foo &)"
+    gdb_test_exact "maint demangle __ad__3fooFR3foo" "foo::operator&(foo &)"
+    gdb_test_exact "maint demangle __adv__3fooFR3foo" "foo::operator/=(foo &)"
+    gdb_test_exact "maint demangle __adv__7complexF7complex" "complex::operator/=(complex)"
+    gdb_test_exact "maint demangle __aer__3fooFR3foo" "foo::operator^=(foo &)"
+    gdb_test_exact "maint demangle __als__3fooFR3foo" "foo::operator<<=(foo &)"
+    gdb_test_exact "maint demangle __amd__3fooFR3foo" "foo::operator%=(foo &)"
+    gdb_test_exact "maint demangle __ami__3fooFR3foo" "foo::operator-=(foo &)"
+    gdb_test_exact "maint demangle __amu__3fooFR3foo" "foo::operator*=(foo &)"
+    gdb_test_exact "maint demangle __amu__7complexF7complex" "complex::operator*=(complex)"
+    gdb_test_exact "maint demangle __aor__3fooFR3foo" "foo::operator|=(foo &)"
+    gdb_test_exact "maint demangle __apl__3fooFR3foo" "foo::operator+=(foo &)"
+    gdb_test_exact "maint demangle __ars__3fooFR3foo" "foo::operator>>=(foo &)"
+    gdb_test_exact "maint demangle __as__18istream_withassignFP9streambuf" "istream_withassign::operator=(streambuf *)"
+    gdb_test_exact "maint demangle __as__18istream_withassignFR7istream" "istream_withassign::operator=(istream &)"
+    gdb_test_exact "maint demangle __as__3fooFR3foo" "foo::operator=(foo &)"
+    gdb_test_exact "maint demangle __as__3iosFR3ios" "ios::operator=(ios &)"
+    gdb_test_exact "maint demangle __cl__3fooFR3foo" "foo::operator()(foo &)"
+    gdb_test_exact "maint demangle __cm__3fooFR3foo" "foo::operator, (foo &)"
+
+    gdb_test_exact "maint demangle __co__3fooFv" "foo::operator~(void)"
+    gdb_test_exact "maint demangle __ct__10istrstreamFPc" "istrstream::istrstream(char *)"
+    gdb_test_exact "maint demangle __ct__10istrstreamFPci" "istrstream::istrstream(char *, int)"
+    gdb_test_exact "maint demangle __ct__10ostrstreamFPciT2" "ostrstream::ostrstream(char *, int, int)"
+    gdb_test_exact "maint demangle __ct__10ostrstreamFv" "ostrstream::ostrstream(void)"
+    gdb_test_exact "maint demangle __ct__10smanip_intFPFR3iosi_R3iosi" "smanip_int::smanip_int(ios &(*)(ios &, int), int)"
+    gdb_test "maint dem __ct__11c_exceptionFPcRC7complexT2" "c_exception::c_exception\[(\]+char \[*\]+, (const complex|complex const) &, (const complex|complex const) &\[)\]+"
+    gdb_test "maint dem __ct__11fstreambaseFPCciT2" "fstreambase::fstreambase\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+    gdb_test_exact "maint demangle __ct__11fstreambaseFi" "fstreambase::fstreambase(int)"
+    gdb_test_exact "maint demangle __ct__11fstreambaseFiPcT1" "fstreambase::fstreambase(int, char *, int)"
+    gdb_test_exact "maint demangle __ct__11fstreambaseFv" "fstreambase::fstreambase(void)"
+    gdb_test_exact "maint demangle __ct__11smanip_longFPFR3iosl_R3iosl" "smanip_long::smanip_long(ios &(*)(ios &, long), long)"
+    gdb_test_exact "maint demangle __ct__11stdiostreamFP4FILE" "stdiostream::stdiostream(FILE *)"
+    gdb_test_exact "maint demangle __ct__12strstreambufFPFl_PvPFPv_v" "strstreambuf::strstreambuf(void *(*)(long), void (*)(void *))"
+    gdb_test_exact "maint demangle __ct__12strstreambufFPUciT1" "strstreambuf::strstreambuf(unsigned char *, int, unsigned char *)"
+    gdb_test_exact "maint demangle __ct__12strstreambufFPciT1" "strstreambuf::strstreambuf(char *, int, char *)"
+    gdb_test_exact "maint demangle __ct__12strstreambufFi" "strstreambuf::strstreambuf(int)"
+    gdb_test_exact "maint demangle __ct__12strstreambufFv" "strstreambuf::strstreambuf(void)"
+    gdb_test_exact "maint demangle __ct__13strstreambaseFPciT1" "strstreambase::strstreambase(char *, int, char *)"
+    gdb_test_exact "maint demangle __ct__3fooFR3foo" "foo::foo(foo &)"
+
+    gdb_test_exact "maint demangle __ct__3fooFi" "foo::foo(int)"
+    gdb_test_exact "maint demangle __ct__3fooFiN31" "foo::foo(int, int, int, int)"
+    gdb_test "maint dem __ct__3fooFiPCc" \
+	"foo::foo\[(\]+int, (const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle __ct__3fooFiR3fooT1T2T1T2" "foo::foo(int, foo &, int, foo &, int, foo &)"
+    gdb_test_exact "maint demangle __ct__3iosFP9streambuf" "ios::ios(streambuf *)"
+    gdb_test_exact "maint demangle __ct__7filebufFiPcT1" "filebuf::filebuf(int, char *, int)"
+    gdb_test "maint dem __ct__7fstreamFPCciT2" \
+	"fstream::fstream\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+    gdb_test_exact "maint demangle __ct__7fstreamFiPcT1" "fstream::fstream(int, char *, int)"
+    gdb_test_exact "maint demangle __ct__7istreamFP9streambuf" "istream::istream(streambuf *)"
+    gdb_test_exact "maint demangle __ct__7istreamFP9streambufiP7ostream" "istream::istream(streambuf *, int, ostream *)"
+    gdb_test_exact "maint demangle __ct__7istreamFiPcT1" "istream::istream(int, char *, int)"
+    gdb_test_exact "maint demangle __ct__7istreamFiT1P7ostream" "istream::istream(int, int, ostream *)"
+    gdb_test_exact "maint demangle __ct__7ostreamFP9streambuf" "ostream::ostream(streambuf *)"
+    gdb_test_exact "maint demangle __ct__7ostreamFiPc" "ostream::ostream(int, char *)"
+    gdb_test "maint dem __ct__8ifstreamFPCciT2" \
+	"ifstream::ifstream\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+    gdb_test_exact "maint demangle __ct__8ifstreamFiPcT1" "ifstream::ifstream(int, char *, int)"
+
+    gdb_test_exact "maint demangle __ct__Q23foo3barFv" "foo::bar::bar(void)"
+    gdb_test_exact "maint demangle __ct__Q33foo3bar4bellFv" "foo::bar::bell::bell(void)"
+    gdb_test_exact "maint demangle __dl__3fooSFPv" "foo::operator delete(void *) static"
+    gdb_test_exact "maint demangle __dl__FPv" "operator delete(void *)"
+    gdb_test_exact "maint demangle __dt__10istrstreamFv" "istrstream::~istrstream(void)"
+
+    gdb_test_exact "maint demangle __dt__Q23foo3barFv" "foo::bar::~bar(void)"
+    gdb_test_exact "maint demangle __dt__Q33foo3bar4bellFv" "foo::bar::bell::~bell(void)"
+    gdb_test_exact "maint demangle __dv__3fooFR3foo" "foo::operator/(foo &)"
+    gdb_test_exact "maint demangle __dv__F7complexT1" "operator/(complex, complex)"
+    gdb_test_exact "maint demangle __eq__3fooFR3foo" "foo::operator==(foo &)"
+    gdb_test_exact "maint demangle __er__3fooFR3foo" "foo::operator^(foo &)"
+    gdb_test_exact "maint demangle __ge__3fooFR3foo" "foo::operator>=(foo &)"
+    gdb_test_exact "maint demangle __gt__3fooFR3foo" "foo::operator>(foo &)"
+    gdb_test_exact "maint demangle __le__3fooFR3foo" "foo::operator<=(foo &)"
+    gdb_test_exact "maint demangle __ls__3fooFR3foo" "foo::operator<<(foo &)"
+    gdb_test_exact "maint demangle __ls__7ostreamFP9streambuf" "ostream::operator<<(streambuf *)"
+
+    gdb_test "maint dem __ls__7ostreamFPCc" \
+	"ostream::operator<<\[(\]+(const char|char const) \[*\]+\[)\]+"
+    gdb_test_exact "maint demangle __ls__7ostreamFPFR3ios_R3ios" "ostream::operator<<(ios &(*)(ios &))"
+    gdb_test_exact "maint demangle __ls__7ostreamFPv" "ostream::operator<<(void *)"
+    gdb_test_exact "maint demangle __ls__7ostreamFUi" "ostream::operator<<(unsigned int)"
+    gdb_test_exact "maint demangle __ls__7ostreamFUl" "ostream::operator<<(unsigned long)"
+    gdb_test_exact "maint demangle __ls__7ostreamFd" "ostream::operator<<(double)"
+    gdb_test_exact "maint demangle __ls__7ostreamFf" "ostream::operator<<(float)"
+    gdb_test_exact "maint demangle __ls__7ostreamFi" "ostream::operator<<(int)"
+    gdb_test_exact "maint demangle __ls__7ostreamFl" "ostream::operator<<(long)"
+    gdb_test_exact "maint demangle __ls__FR7ostream7complex" "operator<<(ostream &, complex)"
+    gdb_test_exact "maint demangle __lt__3fooFR3foo" "foo::operator<(foo &)"
+    gdb_test_exact "maint demangle __md__3fooFR3foo" "foo::operator%(foo &)"
+    gdb_test_exact "maint demangle __mi__3fooFR3foo" "foo::operator-(foo &)"
+    gdb_test_exact "maint demangle __ml__3fooFR3foo" "foo::operator*(foo &)"
+    gdb_test_exact "maint demangle __ml__F7complexT1" "operator*(complex, complex)"
+    gdb_test_exact "maint demangle __mm__3fooFi" "foo::operator--(int)"
+    gdb_test_exact "maint demangle __ne__3fooFR3foo" "foo::operator!=(foo &)"
+    gdb_test_exact "maint demangle __nt__3fooFv" "foo::operator!(void)"
+    gdb_test_exact "maint demangle __nw__3fooSFi" "foo::operator new(int) static"
+    gdb_test_exact "maint demangle __nw__FUi" "operator new(unsigned int)"
+    gdb_test_exact "maint demangle __nw__FUiPv" "operator new(unsigned int, void *)"
+    gdb_test_exact "maint demangle __oo__3fooFR3foo" "foo::operator||(foo &)"
+    gdb_test_exact "maint demangle __opPc__3fooFv" "foo::operator char *(void)"
+    gdb_test_exact "maint demangle __opi__3fooFv" "foo::operator int(void)"
+    gdb_test_exact "maint demangle __or__3fooFR3foo" "foo::operator|(foo &)"
+
+    gdb_test_exact "maint demangle __pl__3fooFR3foo" "foo::operator+(foo &)"
+    gdb_test_exact "maint demangle __pp__3fooFi" "foo::operator++(int)"
+    gdb_test_exact "maint demangle __pt__3fooFv" "foo::operator->(void)"
+    gdb_test_exact "maint demangle __rm__3fooFR3foo" "foo::operator->*(foo &)"
+    gdb_test_exact "maint demangle __rs__3fooFR3foo" "foo::operator>>(foo &)"
+    gdb_test_exact "maint demangle __rs__7istreamFP9streambuf" "istream::operator>>(streambuf *)"
+    gdb_test_exact "maint demangle __rs__7istreamFPFR3ios_R3ios" "istream::operator>>(ios &(*)(ios &))"
+    gdb_test_exact "maint demangle __rs__7istreamFPFR7istream_R7istream" "istream::operator>>(istream &(*)(istream &))"
+    gdb_test_exact "maint demangle __rs__7istreamFPUc" "istream::operator>>(unsigned char *)"
+    gdb_test_exact "maint demangle __rs__7istreamFPc" "istream::operator>>(char *)"
+    gdb_test_exact "maint demangle __rs__7istreamFRUi" "istream::operator>>(unsigned int &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRUl" "istream::operator>>(unsigned long &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRUs" "istream::operator>>(unsigned short &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRd" "istream::operator>>(double &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRf" "istream::operator>>(float &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRi" "istream::operator>>(int &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRl" "istream::operator>>(long &)"
+    gdb_test_exact "maint demangle __rs__7istreamFRs" "istream::operator>>(short &)"
+    gdb_test_exact "maint demangle __rs__FR7istreamR7complex" "operator>>(istream &, complex &)"
+    gdb_test "maint dem __vc__3fooFR3foo" "foo::operator\\\[\\\]\\(foo &\\)"
+    gdb_test_exact "maint demangle __vtbl__10istrstream" "istrstream virtual table"
+    gdb_test_exact "maint demangle __vtbl__17ostream__iostream__19iostream_withassign" "iostream_withassign::ostream__iostream virtual table"
+
+    gdb_test_exact "maint demangle __vtbl__3ios" "ios virtual table"
+    gdb_test_exact "maint demangle __vtbl__3ios__13strstreambase" "strstreambase::ios virtual table"
+
+    # GDB 930414 demangles this as t_cc_main_ (obviously wrong).
+    # GDB 930701 gets into an infinite loop.
+    # GDB 930727 says "Can't demangle".
+    # What is the correct demangling?  FIXME.
+    setup_xfail "*-*-*"
+    gdb_test_exact "maint demangle __vtbl__3foo__vt_cc_main_" ""
+
+    gdb_test_exact "maint demangle abs__F7complex" "abs(complex)"
+    gdb_test_exact "maint demangle allocate__9streambufFv" "streambuf::allocate(void)"
+    gdb_test_exact "maint demangle attach__11fstreambaseFi" "fstreambase::attach(int)"
+    gdb_test_exact "maint demangle bitalloc__3iosSFv" "ios::bitalloc(void) static"
+    gdb_test_exact "maint demangle chr__FiT1" "chr(int, int)"
+    gdb_test_exact "maint demangle complex_error__FR11c_exception" "complex_error(c_exception &)"
+    gdb_test_exact "maint demangle complexfunc2__FPFPc_i" "complexfunc2(int (*)(char *))"
+    gdb_test_exact "maint demangle complexfunc3__FPFPFPl_s_i" "complexfunc3(int (*)(short (*)(long *)))"
+
+    gdb_test_exact "maint demangle complexfunc4__FPFPFPc_s_i" "complexfunc4(int (*)(short (*)(char *)))"
+    gdb_test_exact "maint demangle complexfunc5__FPFPc_PFl_i" "complexfunc5(int (*(*)(char *))(long))"
+    gdb_test_exact "maint demangle complexfunc6__FPFPi_PFl_i" "complexfunc6(int (*(*)(int *))(long))"
+    gdb_test_exact "maint demangle complexfunc7__FPFPFPc_i_PFl_i" "complexfunc7(int (*(*)(int (*)(char *)))(long))"
+    gdb_test_exact "maint demangle complicated_put__7ostreamFc" "ostream::complicated_put(char)"
+    gdb_test_exact "maint demangle conv10__FlPc" "conv10(long, char *)"
+    gdb_test_exact "maint demangle conv16__FUlPc" "conv16(unsigned long, char *)"
+    gdb_test_exact "maint demangle dec__FR3ios" "dec(ios &)"
+    gdb_test_exact "maint demangle dec__Fli" "dec(long, int)"
+    gdb_test_exact "maint demangle dofield__FP7ostreamPciT2T3" "dofield(ostream *, char *, int, char *, int)"
+
+    gdb_test_exact "maint demangle flags__3iosFl" "ios::flags(long)"
+    gdb_test_exact "maint demangle flags__3iosFv" "ios::flags(void)"
+    gdb_test_exact "maint demangle foo__FiN31" "foo(int, int, int, int)"
+    gdb_test_exact "maint demangle foo__FiR3fooT1T2T1T2" "foo(int, foo &, int, foo &, int, foo &)"
+    gdb_test_exact "maint demangle foo___3barFl" "bar::foo_(long)"
+    gdb_test "maint dem form__FPCce" "form\[(\]+(const char|char const) \[*\]+,...\[)\]+"
+    gdb_test_exact "maint demangle get__7istreamFPcic" "istream::get(char *, int, char)"
+    gdb_test_exact "maint demangle get__7istreamFR9streambufc" "istream::get(streambuf &, char)"
+    gdb_test_exact "maint demangle get_complicated__7istreamFRUc" "istream::get_complicated(unsigned char &)"
+    gdb_test_exact "maint demangle get_complicated__7istreamFRc" "istream::get_complicated(char &)"
+    gdb_test_exact "maint demangle getline__7istreamFPUcic" "istream::getline(unsigned char *, int, char)"
+    gdb_test_exact "maint demangle getline__7istreamFPcic" "istream::getline(char *, int, char)"
+
+    gdb_test_exact "maint demangle ignore__7istreamFiT1" "istream::ignore(int, int)"
+    gdb_test_exact "maint demangle init__12strstreambufFPciT1" "strstreambuf::init(char *, int, char *)"
+    gdb_test_exact "maint demangle init__3iosFP9streambuf" "ios::init(streambuf *)"
+    gdb_test_exact "maint demangle initcount__13Iostream_init" "Iostream_init::initcount"
+    gdb_test_exact "maint demangle ipfx__7istreamFi" "istream::ipfx(int)"
+    gdb_test_exact "maint demangle ls_complicated__7ostreamFUc" "ostream::ls_complicated(unsigned char)"
+    gdb_test_exact "maint demangle ls_complicated__7ostreamFc" "ostream::ls_complicated(char)"
+    gdb_test "maint dem open__11fstreambaseFPCciT2" \
+	"fstreambase::open\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+    gdb_test "maint dem open__7filebufFPCciT2" \
+	"filebuf::open\[(\]+(const char|char const) \[*\]+, int, int\[)\]+"
+
+    gdb_test_exact "maint demangle overload1arg__FSc" "overload1arg(signed char)"
+    gdb_test_exact "maint demangle overload1arg__FUc" "overload1arg(unsigned char)"
+    gdb_test_exact "maint demangle overload1arg__FUi" "overload1arg(unsigned int)"
+    gdb_test_exact "maint demangle overload1arg__FUl" "overload1arg(unsigned long)"
+    gdb_test_exact "maint demangle overload1arg__FUs" "overload1arg(unsigned short)"
+    gdb_test_exact "maint demangle overload1arg__Fc" "overload1arg(char)"
+    gdb_test_exact "maint demangle overload1arg__Fd" "overload1arg(double)"
+    gdb_test_exact "maint demangle overload1arg__Ff" "overload1arg(float)"
+    gdb_test_exact "maint demangle overload1arg__Fi" "overload1arg(int)"
+    gdb_test_exact "maint demangle overload1arg__Fl" "overload1arg(long)"
+    gdb_test_exact "maint demangle overload1arg__Fs" "overload1arg(short)"
+    gdb_test_exact "maint demangle overload1arg__Fv" "overload1arg(void)"
+    gdb_test_exact "maint demangle overloadargs__FiN21" "overloadargs(int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN31" "overloadargs(int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN41" "overloadargs(int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN51" "overloadargs(int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN61" "overloadargs(int, int, int, int, int, int, int)"
+
+    gdb_test_exact "maint demangle overloadargs__FiN71" "overloadargs(int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN81" "overloadargs(int, int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN91" "overloadargs(int, int, int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiN91N11" "overloadargs(int, int, int, int, int, int, int, int, int, int, int)"
+    gdb_test_exact "maint demangle overloadargs__FiT1" "overloadargs(int, int)"
+    gdb_test_exact "maint demangle polar__FdT1" "polar(double, double)"
+    gdb_test_exact "maint demangle pow__F7complexT1" "pow(complex, complex)"
+    gdb_test_exact "maint demangle pow__F7complexd" "pow(complex, double)"
+    gdb_test_exact "maint demangle pow__F7complexi" "pow(complex, int)"
+    gdb_test_exact "maint demangle pow__Fd7complex" "pow(double, complex)"
+    gdb_test_exact "maint demangle pstart__FPciT2" "pstart(char *, int, int)"
+    gdb_test_exact "maint demangle put__7ostreamFc" "ostream::put(char)"
+
+    gdb_test_exact "maint demangle read__7istreamFPci" "istream::read(char *, int)"
+    gdb_test_exact "maint demangle resetiosflags__FR3iosl" "resetiosflags(ios &, long)"
+    gdb_test_exact "maint demangle restore_errno__FRi" "restore_errno(int &)"
+    gdb_test_exact "maint demangle rs_complicated__7istreamFRUc" "istream::rs_complicated(unsigned char &)"
+    gdb_test_exact "maint demangle rs_complicated__7istreamFRc" "istream::rs_complicated(char &)"
+    gdb_test_exact "maint demangle seekg__7istreamFl8seek_dir" "istream::seekg(long, seek_dir)"
+    gdb_test_exact "maint demangle seekoff__12strstreambufFl8seek_diri" "strstreambuf::seekoff(long, seek_dir, int)"
+    gdb_test_exact "maint demangle seekoff__9streambufFlQ2_3ios12ios_seek_diri" "streambuf::seekoff(long, ios::ios_seek_dir, int)"
+    gdb_test_exact "maint demangle seekpos__9streambufFli" "streambuf::seekpos(long, int)"
+    gdb_test_exact "maint demangle set_new_handler__FPFv_v" "set_new_handler(void (*)(void))"
+    gdb_test_exact "maint demangle setb__9streambufFPcT1i" "streambuf::setb(char *, char *, int)"
+
+    gdb_test_exact "maint demangle setb__FR3iosi" "setb(ios &, int)"
+    gdb_test_exact "maint demangle setbuf__11fstreambaseFPci" "fstreambase::setbuf(char *, int)"
+    gdb_test_exact "maint demangle setbuf__9streambufFPUci" "streambuf::setbuf(unsigned char *, int)"
+    gdb_test_exact "maint demangle setbuf__9streambufFPciT2" "streambuf::setbuf(char *, int, int)"
+    gdb_test_exact "maint demangle setf__3iosFlT1" "ios::setf(long, long)"
+    gdb_test_exact "maint demangle setfill__FR3iosi" "setfill(ios &, int)"
+    gdb_test_exact "maint demangle setg__9streambufFPcN21" "streambuf::setg(char *, char *, char *)"
+    gdb_test_exact "maint demangle setp__9streambufFPcT1" "streambuf::setp(char *, char *)"
+
+    gdb_test "maint dem sputn__9streambufFPCci" \
+	"streambuf::sputn\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+    gdb_test "maint dem str__FPCci" \
+	"str\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+    gdb_test_exact "maint demangle tie__3iosFP7ostream" "ios::tie(ostream *)"
+    gdb_test_exact "maint demangle uconv10__FUlPc" "uconv10(unsigned long, char *)"
+
+    gdb_test "maint dem write__7ostreamFPCci" \
+	"ostream::write\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+    gdb_test_exact "maint demangle xget__7istreamFPc" "istream::xget(char *)"
+    gdb_test_exact "maint demangle xsgetn__9streambufFPci" "streambuf::xsgetn(char *, int)"
+    gdb_test "maint dem xsputn__9streambufFPCci" \
+	"streambuf::xsputn\[(\]+(const char|char const) \[*\]+, int\[)\]+"
+}
+
+#
+#  Test arm style name demangling
+#
+
+proc test_arm_style_demangling {} {
+    global gdb_prompt
+
+    # Set the demangling style to "arm" and then check to make sure
+    # it really got set.  Return if the style failed to get set for
+    # some reason.
+
+    send_gdb "set demangle-style arm\n"
+    gdb_expect {
+	-re "set demangle-style arm\[\r\n\]+$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "set demangle-style arm failed" ; return }
+	timeout { fail "set demangle-style arm failed (timeout)" ; return }
+    }
+
+    send_gdb "show demangle-style\n"
+    gdb_expect {
+	-re "The current C\[+\]+ demangling style is \"arm\".\r\n$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "demangling style not set to arm" }
+	timeout { fail "show demangle-style timed out" }
+    }
+
+    gdb_test_exact "maint demangle __dt__21T5__pt__11_PFiPPdPv_iFv" "T5<int (*)(int, double **, void *)>::~T5(void)"
+
+    gdb_test_exact "maint demangle __ct__1cFi" "c::c(int)"
+
+    gdb_test_exact "maint demangle __dt__11T5__pt__2_iFv" "T5<int>::~T5(void)"
+
+    gdb_test_exact "maint demangle __dt__11T5__pt__2_cFv" "T5<char>::~T5(void)"
+
+    gdb_test_exact "maint demangle __ct__2T2Fi" "T2::T2(int)"
+    gdb_test_exact "maint demangle __dt__2T1Fv" "T1::~T1(void)"
+
+    gdb_test_exact "maint demangle __dt__12T5__pt__3_1xFv" "T5<x>::~T5(void)"
+
+    gdb_test_exact "maint demangle __dt__17T5__pt__8_PFcPv_iFv" "T5<int (*)(char, void *)>::~T5(void)"
+
+    gdb_test "maint dem g__FP1cPC1cT1" \
+	"g\[(\]+c *\[*\]+, (const c|c const) *\[*\]+, c *\[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUlPCUlT1" \
+	"g\[(\]+unsigned long \[*\]+, (const unsigned long|unsigned long const) \[*\]+, unsigned long \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUiPCUiT1" \
+	"g\[(\]+unsigned int \[*\]+, (const unsigned int|unsigned int const) \[*\]+, unsigned int \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUsPCUsT1" \
+	"g\[(\]+unsigned short \[*\]+, (const unsigned short|unsigned short const) \[*\]+, unsigned short \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUcPCUcT1" \
+	"g\[(\]+unsigned char \[*\]+, (const unsigned char|unsigned char const) \[*\]+, unsigned char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1TPlPClT2" \
+	"g\[(\]+T, long \[*\]+, (const long|long const) \[*\]+, long \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRlRClT2" \
+	"g\[(\]+R, long &, (const long|long const) &, long &\[)\]+"
+    gdb_test "maint dem g__F1TPiPCiT2" \
+	"g\[(\]+T, int \[*\]+, (const int|int const) \[*\]+, int \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRiRCiT2" \
+	"g\[(\]+R, int &, (const int|int const) &, int &\[)\]+"
+    gdb_test "maint dem g__F1TPsPCsT2" \
+	"g\[(\]+T, short \[*\]+, (const short|short const) \[*\]+, short \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRsRCsT2" \
+	"g\[(\]+R, short &, (const short|short const) &, short &\[)\]+"
+    gdb_test "maint dem g__F1TPcPCcT2" \
+	"g\[(\]+T, char \[*\]+, (const char|char const) \[*\]+, char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRcRCcT2" \
+	"g\[(\]+R, char &, (const char|char const) &, char &\[)\]+"
+
+    gdb_test_exact "maint demangle __ct__21T5__pt__11_PFiPPdPv_iFi" "T5<int (*)(int, double **, void *)>::T5(int)"
+
+    gdb_test "maint dem __gt__FRC2T2c" \
+	"operator>\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __ge__FRC2T2c" \
+	"operator>=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __lt__FRC2T2c" \
+	"operator<\[(\]+(const T2|T2 const) &, char\[)\]+"
+
+    gdb_test "maint dem __le__FRC2T2c" \
+	"operator<=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __ne__FRC2T2c" \
+	"operator!=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __eq__FRC2T2c" \
+	"operator==\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test_exact "maint demangle __amd__FR2T2i" "operator%=(T2 &, int)"
+    gdb_test_exact "maint demangle __adv__FR2T2i" "operator/=(T2 &, int)"
+    gdb_test_exact "maint demangle __amu__FR2T2i" "operator*=(T2 &, int)"
+    gdb_test_exact "maint demangle __ami__FR2T2i" "operator-=(T2 &, int)"
+    gdb_test_exact "maint demangle __apl__FR2T2i" "operator+=(T2 &, int)"
+    gdb_test_exact "maint demangle __nw__2T1SFUi" "T1::operator new(unsigned int) static"
+    gdb_test_exact "maint demangle __dl__2T1SFPv" "T1::operator delete(void *) static"
+    gdb_test_exact "maint demangle put__2T7SFi" "T7::put(int) static"
+
+    gdb_test_exact "maint demangle __dl__12T5__pt__3_1xSFPv" "T5<x>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle h__FUc" "h(unsigned char)"
+    gdb_test_exact "maint demangle f__Fic" "f(int, char)"
+    gdb_test_exact "maint demangle h__FUi" "h(unsigned int)"
+    gdb_test_exact "maint demangle h__Fci" "h(char, int)"
+    gdb_test_exact "maint demangle h__FUl" "h(unsigned long)"
+    gdb_test_exact "maint demangle h__Fcl" "h(char, long)"
+    gdb_test_exact "maint demangle h__FUs" "h(unsigned short)"
+    gdb_test_exact "maint demangle h__Fcs" "h(char, short)"
+    gdb_test "maint dem __amd__FR2T2RC2T2" \
+	"operator%=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __adv__FR2T2RC2T2" \
+	"operator/=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __amu__FR2T2RC2T2" \
+	"operator\[*\]+=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ami__FR2T2RC2T2" \
+	"operator-=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __apl__FR2T2RC2T2" \
+	"operator\[+\]+=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+
+    gdb_test "maint dem g__F1SRPUlRPCUlT2" \
+	"g\[(\]+S, unsigned long \[*\]+&, (const unsigned long|unsigned long const) \[*\]+&, unsigned long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUiRPCUiT2" \
+	"g\[(\]+S, unsigned int \[*\]+&, (const unsigned int|unsigned int const) \[*\]+&, unsigned int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUsRPCUsT2" \
+	"g\[(\]+S, unsigned short \[*\]+&, (const unsigned short|unsigned short const) \[*\]+&, unsigned short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUcRPCUcT2" \
+	"g\[(\]+S, unsigned char \[*\]+&, (const unsigned char|unsigned char const) \[*\]+&, unsigned char \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPlRPClT3" \
+	"g\[(\]+T, S, long \[*\]+&, (const long|long const) \[*\]+&, long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPiRPCiT3" \
+	"g\[(\]+T, S, int \[*\]+&, (const int|int const) \[*\]+&, int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPcRPCcT3" \
+	"g\[(\]+T, S, char \[*\]+&, (const char|char const) \[*\]+&, char \[*\]+&\[)\]+"
+
+    gdb_test_exact "maint demangle X__12T5__pt__3_1x" "T5<x>::X"
+
+    gdb_test_exact "maint demangle __ct__11T5__pt__2_iFi" "T5<int>::T5(int)"
+
+    gdb_test_exact "maint demangle __ct__11T5__pt__2_cFi" "T5<char>::T5(int)"
+
+    gdb_test "maint dem __gt__FRC2T2T1" \
+	"operator>\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ge__FRC2T2T1" \
+	"operator>=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __lt__FRC2T2T1" \
+	"operator<\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __le__FRC2T2T1" \
+	"operator<=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ne__FRC2T2T1" \
+	"operator!=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __eq__FRC2T2T1" \
+	"operator==\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem g__FcR1cRC1cT2" \
+	"g\[(\]+char, c &, (const c|c const) &, c &\[)\]+"
+    gdb_test "maint dem g__FcRPdRPCdT2" \
+	"g\[(\]+char, double *\[*\]+&, (const double|double const) *\[*\]+&, double *\[*\]+&\[)\]+"
+    gdb_test "maint dem g__FcRPfRPCfT2" \
+	"g\[(\]+char, float *\[*\]+&, (const float|float const) *\[*\]+&, float *\[*\]+&\[)\]+"
+    gdb_test_exact "maint demangle h__FcT1" "h(char, char)"
+    gdb_test_exact "maint demangle f__Ficd" "f(int, char, double)"
+    gdb_test "maint dem g__F1T1SdRPsRPCsT4" \
+	"g\[(\]+T, S, double, short \[*\]+&, (const short|short const) \[*\]+&, short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1cC1cT1" \
+	"g\[(\]+c, (const c|c const), c\[)\]+"
+    gdb_test "maint dem g__FPdPCdT1" \
+	"g\[(\]+double *\[*\]+, (const double|double const) *\[*\]+, double *\[*\]+\[)\]+"
+    gdb_test "maint dem g__FPfPCfT1" \
+	"g\[(\]+float *\[*\]+, (const float|float const) *\[*\]+, float *\[*\]+\[)\]+"
+
+    gdb_test "maint dem g__FUlCUlT1" \
+	"g\[(\]+unsigned long, (const unsigned long|unsigned long const), unsigned long\[)\]+"
+    gdb_test "maint dem g__FPlPClT1" \
+	"g\[(\]+long \[*\]+, (const long|long const) \[*\]+, long \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUiCUiT1" \
+	"g\[(\]+unsigned int, (const unsigned int|unsigned int const), unsigned int\[)\]+"
+    gdb_test "maint dem g__FPiPCiT1" \
+	"g\[(\]+int \[*\]+, (const int|int const) \[*\]+, int \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUsCUsT1" \
+	"g\[(\]+unsigned short, (const unsigned short|unsigned short const), unsigned short\[)\]+"
+    gdb_test "maint dem g__FPsPCsT1" \
+	"g\[(\]+short \[*\]+, (const short|short const) \[*\]+, short \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUcCUcT1" \
+	"g\[(\]+unsigned char, (const unsigned char|unsigned char const), unsigned char\[)\]+"
+    gdb_test "maint dem g__FPcPCcT1" \
+	"g\[(\]+char \[*\]+, (const char|char const) \[*\]+, char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1TlClT2" \
+	"g\[(\]+T, long, (const long|long const), long\[)\]+"
+    gdb_test "maint dem g__F1TiCiT2" \
+	"g\[(\]+T, int, (const int|int const), int\[)\]+"
+    gdb_test "maint dem g__F1TsCsT2" \
+	"g\[(\]+T, short, (const short|short const), short\[)\]+"
+    gdb_test "maint dem g__F1TcCcT2" \
+	"g\[(\]+T, char, (const char|char const), char\[)\]+"
+
+    gdb_test_exact "maint demangle __dl__17T5__pt__8_PFcPv_iSFPv" "T5<int (*)(char, void *)>::operator delete(void *) static"
+
+    gdb_test "maint dem printf__FPCce" \
+	"printf\[(\]+(const char|char const) \[*\]+,...\[)\]+"
+
+    gdb_test_exact "maint demangle X__17T5__pt__8_PFcPv_i" "T5<int (*)(char, void *)>::X"
+
+    gdb_test_exact "maint demangle __ct__12T5__pt__3_1xFi" "T5<x>::T5(int)"
+
+    gdb_test "maint dem g__F1SRUlRCUlT2" \
+	"g\[(\]+S, unsigned long &, (const unsigned long|unsigned long const) &, unsigned long &\[)\]+"
+    gdb_test "maint dem g__F1SRPlRPClT2" \
+	"g\[(\]+S, long \[*\]+&, (const long|long const) \[*\]+&, long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUiRCUiT2" \
+	"g\[(\]+R, unsigned int &, (const unsigned int|unsigned int const) &, unsigned int &\[)\]+"
+    gdb_test "maint dem g__F1SRPiRPCiT2" \
+	"g\[(\]+S, int \[*\]+&, (const int|int const) \[*\]+&, int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUsRCUsT2" \
+	"g\[(\]+R, unsigned short &, (const unsigned short|unsigned short const) &, unsigned short &\[)\]+"
+    gdb_test "maint dem g__F1SRPsRPCsT2" \
+	"g\[(\]+S, short \[*\]+&, (const short|short const) \[*\]+&, short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUcRCUcT2" \
+	"g\[(\]+R, unsigned char &, (const unsigned char|unsigned char const) &, unsigned char &\[)\]+"
+    gdb_test "maint dem g__F1SRPcRPCcT2" \
+	"g\[(\]+S, char \[*\]+&, (const char|char const) \[*\]+&, char \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1RRlRClT3" \
+	"g\[(\]+T, R, long &, (const long|long const) &, long &\[)\]+"
+    gdb_test "maint dem g__F1T1RRiRCiT3" \
+	"g\[(\]+T, R, int &, (const int|int const) &, int &\[)\]+"
+    gdb_test "maint dem g__F1T1RRsRCsT3" \
+	"g\[(\]+T, R, short &, (const short|short const) &, short &\[)\]+"
+    gdb_test "maint dem g__F1T1RRcRCcT3" \
+	"g\[(\]+T, R, char &, (const char|char const) &, char &\[)\]+"
+
+    gdb_test_exact "maint demangle __dl__21T5__pt__11_PFiPPdPv_iSFPv" "T5<int (*)(int, double **, void *)>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle __std__foo" "global destructors keyed to foo"
+
+    gdb_test_exact "maint demangle __sti__bar" "global constructors keyed to bar"
+
+    gdb_test_exact "maint demangle f__FicdPcPFci_v" "f(int, char, double, char *, void (*)(char, int))"
+    gdb_test_exact "maint demangle f__FicdPcPFic_v" "f(int, char, double, char *, void (*)(int, char))"
+    gdb_test_exact "maint demangle get__2T7SFv" "T7::get(void) static"
+
+    gdb_test_exact "maint demangle X__21T5__pt__11_PFiPPdPv_i" "T5<int (*)(int, double **, void *)>::X"
+
+    gdb_test "maint dem g__FcRdRCdT2" \
+	"g\[(\]+char, double &, (const double|double const) &, double &\[)\]+"
+    gdb_test "maint dem g__FcRfRCfT2" \
+	"g\[(\]+char, float &, (const float|float const) &, float &\[)\]+"
+    gdb_test "maint dem __md__FC2T2i" \
+	"operator%\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __dv__FC2T2i" \
+	"operator/\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __ml__FC2T2i" \
+	"operator\[*\]+\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __mi__FC2T2i" \
+	"operator-\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __pl__FC2T2i" \
+	"operator\[+\]+\[(\]+(const T2|T2 const), int\[)\]+"
+
+    gdb_test_exact "maint demangle __dl__11T5__pt__2_iSFPv" "T5<int>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle __dl__11T5__pt__2_cSFPv" "T5<char>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle h__Fc" "h(char)"
+    gdb_test_exact "maint demangle h__Fd" "h(double)"
+    gdb_test_exact "maint demangle h__Ff" "h(float)"
+    gdb_test_exact "maint demangle h__Fi" "h(int)"
+    gdb_test_exact "maint demangle f__Fi" "f(int)"
+    gdb_test_exact "maint demangle h__Fl" "h(long)"
+
+    gdb_test_exact "maint demangle h__Fs" "h(short)"
+    gdb_test "maint dem __md__FC2T2RC2T2" \
+	"operator%\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __dv__FC2T2RC2T2" \
+	"operator/\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ml__FC2T2RC2T2" \
+	"operator\[*\]+\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __mi__FC2T2RC2T2" \
+	"operator-\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __pl__FC2T2RC2T2" \
+	"operator\[+\]+\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem g__FcRP1cRPC1cT2" \
+	"g\[(\]+char, c *\[*\]+&, (const c|c const) *\[*\]+&, c *\[*\]+&\[)\]+"
+
+    gdb_test_exact "maint demangle X__11T5__pt__2_c" "T5<char>::X"
+
+    gdb_test_exact "maint demangle X__11T5__pt__2_i" "T5<int>::X"
+
+    gdb_test "maint dem g__FdCdT1" \
+	"g\[(\]+double, (const double|double const), double\[)\]+"
+    gdb_test "maint dem g__FfCfT1" \
+	"g\[(\]+float, (const float|float const), float\[)\]+"
+    gdb_test "maint dem g__FlClT1" \
+	"g\[(\]+long, (const long|long const), long\[)\]+"
+    gdb_test "maint dem g__FiCiT1" \
+	"g\[(\]+int, (const int|int const), int\[)\]+"
+    gdb_test "maint dem g__FsCsT1" \
+	"g\[(\]+short, (const short|short const), short\[)\]+"
+    gdb_test "maint dem g__FcCcT1" \
+	"g\[(\]+char, (const char|char const), char\[)\]+"
+
+    gdb_test_exact "maint demangle __ct__17T5__pt__8_PFcPv_iFi" "T5<int (*)(char, void *)>::T5(int)"
+
+    gdb_test_exact "maint demangle f__FicdPc" "f(int, char, double, char *)"
+    gdb_test_exact "maint demangle __nw__FUi" "operator new(unsigned int)"
+    gdb_test_exact "maint demangle __ct__Q3_2T11a1bSFi" "T1::a::b::b(int) static"
+    gdb_test_exact "maint demangle __dt__Q3_2T11a1bSFi" "T1::a::b::~b(int) static"
+    gdb_test_exact "maint demangle put__Q3_2T11a1bSFi" "T1::a::b::put(int) static"
+    gdb_test_exact "maint demangle get__Q2_2T11aSFv" "T1::a::get(void) static"
+    gdb_test_exact "maint demangle put__2T1SFi" "T1::put(int) static"
+    gdb_test_exact "maint demangle put__Q5_2T11a1b1c1dSFi" "T1::a::b::c::d::put(int) static"
+    gdb_test_exact "maint demangle get__Q4_2T11a1b1cSFv" "T1::a::b::c::get(void) static"
+    gdb_test_exact "maint demangle put__Q2_2T11aSFi" "T1::a::put(int) static"
+    gdb_test_exact "maint demangle put__Q4_2T11a1b1cSFi" "T1::a::b::c::put(int) static"
+    gdb_test_exact "maint demangle get__Q3_2T11a1bSFv" "T1::a::b::get(void) static"
+    gdb_test_exact "maint demangle get__2T1SFv" "T1::get(void) static"
+    gdb_test_exact "maint demangle get__Q5_2T11a1b1c1dSFv" "T1::a::b::c::d::get(void) static"
+
+    gdb_test_exact "maint demangle __dt__11T1__pt__2_cFv" "T1<char>::~T1(void)"
+
+    gdb_test_exact "maint demangle __dt__12T1__pt__3_1tFv" "T1<t>::~T1(void)"
+
+    gdb_test_exact "maint demangle __dl__12T1__pt__3_1tSFPv" "T1<t>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle __ct__11T1__pt__2_cFi" "T1<char>::T1(int)"
+
+    gdb_test_exact "maint demangle __ct__11T1__pt__2_cFv" "T1<char>::T1(void)"
+
+    gdb_test_exact "maint demangle __ct__12T1__pt__3_1tFi" "T1<t>::T1(int)"
+
+    gdb_test_exact "maint demangle __ct__12T1__pt__3_1tFv" "T1<t>::T1(void)"
+
+    gdb_test_exact "maint demangle __dl__11T1__pt__2_cSFPv" "T1<char>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle bar__3fooFPv"       "foo::bar(void *)"
+    gdb_test "maint dem bar__3fooFPCv" \
+	     "foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+"
+    gdb_test_exact "maint demangle bar__3fooCFPv"      "foo::bar(void *) const"
+    gdb_test "maint dem bar__3fooCFPCv" \
+	    "foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+ const"
+    gdb_test_exact "maint demangle __eq__3fooFR3foo"   "foo::operator==(foo &)"
+    gdb_test "maint dem __eq__3fooFRC3foo" \
+	 "foo::operator==\[(\]+(const foo|foo const) &\[)\]+"
+    gdb_test_exact "maint demangle __eq__3fooCFR3foo"  "foo::operator==(foo &) const"
+    gdb_test "maint dem __eq__3fooCFRC3foo" \
+	"foo::operator==\[(\]+(const foo|foo const) &\[)\]+ const"
+
+    gdb_test_exact "maint demangle elem__15vector__pt__2_dFi" "vector<double>::elem(int)"
+
+    gdb_test_exact "maint demangle elem__15vector__pt__2_iFi" "vector<int>::elem(int)"
+
+    gdb_test_exact "maint demangle __ct__15vector__pt__2_dFi" "vector<double>::vector(int)"
+
+    gdb_test_exact "maint demangle __ct__15vector__pt__2_iFi" "vector<int>::vector(int)"
+
+    gdb_test_exact "maint demangle __ct__25DListNode__pt__9_R6RLabelFR6RLabelP25DListNode__pt__9_R6RLabelT2" \
+	"DListNode<RLabel &>::DListNode(RLabel &, DListNode<RLabel &> *, DListNode<RLabel &> *)"
+
+    gdb_test_exact "maint demangle bar__3fooFiT16FooBar" "foo::bar(int, int, FooBar)"
+
+    gdb_test_exact "maint demangle bar__3fooFPiN51PdN37PcN211T1iN215" \
+      "foo::bar(int *, int *, int *, int *, int *, int *, double *, double *, double *, double *, char *, char *, char *, int *, int, int, int)"
+
+}
+
+proc test_hp_style_demangling {} {
+    global gdb_prompt
+
+    # Set the demangling style to "hp" and then check to make sure
+    # it really got set.  Return if the style failed to get set for
+    # some reason.
+
+    send_gdb "set demangle-style hp\n"
+    gdb_expect {
+	-re "set demangle-style hp\[\r\n\]+$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "set demangle-style hp failed" ; return }
+	timeout { fail "set demangle-style hp failed (timeout)" ; return }
+    }
+
+    send_gdb "show demangle-style\n"
+    gdb_expect {
+	-re "The current C\[+\]+ demangling style is \"hp\".\r\n$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "demangling style not set to hp" }
+	timeout { fail "show demangle-style timed out (HP)" }
+    }
+
+    # HP aCC mangling style is based on ARM for all the basic stuff,
+    # so first we use some of the ARM tests here.  Later we have HP-specific
+    # tests.
+        
+    gdb_test "maint dem g__FP1cPC1cT1" \
+	"g\[(\]+c *\[*\]+, (const c|c const) *\[*\]+, c *\[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUlPCUlT1" \
+	"g\[(\]+unsigned long \[*\]+, (const unsigned long|unsigned long const) \[*\]+, unsigned long \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUiPCUiT1" \
+	"g\[(\]+unsigned int \[*\]+, (const unsigned int|unsigned int const) \[*\]+, unsigned int \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUsPCUsT1" \
+	"g\[(\]+unsigned short \[*\]+, (const unsigned short|unsigned short const) \[*\]+, unsigned short \[*\]+\[)\]+"
+    gdb_test "maint dem g__FPUcPCUcT1" \
+	"g\[(\]+unsigned char \[*\]+, (const unsigned char|unsigned char const) \[*\]+, unsigned char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1TPlPClT2" \
+	"g\[(\]+T, long \[*\]+, (const long|long const) \[*\]+, long \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRlRClT2" \
+	"g\[(\]+R, long &, (const long|long const) &, long &\[)\]+"
+    gdb_test "maint dem g__F1TPiPCiT2" \
+	"g\[(\]+T, int \[*\]+, (const int|int const) \[*\]+, int \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRiRCiT2" \
+	"g\[(\]+R, int &, (const int|int const) &, int &\[)\]+"
+    gdb_test "maint dem g__F1TPsPCsT2" \
+	"g\[(\]+T, short \[*\]+, (const short|short const) \[*\]+, short \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRsRCsT2" \
+	"g\[(\]+R, short &, (const short|short const) &, short &\[)\]+"
+    gdb_test "maint dem g__F1TPcPCcT2" \
+	"g\[(\]+T, char \[*\]+, (const char|char const) \[*\]+, char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1RRcRCcT2" \
+	"g\[(\]+R, char &, (const char|char const) &, char &\[)\]+"
+
+    gdb_test "maint dem __gt__FRC2T2c" \
+	"operator>\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __ge__FRC2T2c" \
+	"operator>=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __lt__FRC2T2c" \
+	"operator<\[(\]+(const T2|T2 const) &, char\[)\]+"
+
+    gdb_test "maint dem __le__FRC2T2c" \
+	"operator<=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __ne__FRC2T2c" \
+	"operator!=\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test "maint dem __eq__FRC2T2c" \
+	"operator==\[(\]+(const T2|T2 const) &, char\[)\]+"
+    gdb_test_exact "maint demangle __amd__FR2T2i" "operator%=(T2 &, int)"
+    gdb_test_exact "maint demangle __adv__FR2T2i" "operator/=(T2 &, int)"
+    gdb_test_exact "maint demangle __amu__FR2T2i" "operator*=(T2 &, int)"
+    gdb_test_exact "maint demangle __ami__FR2T2i" "operator-=(T2 &, int)"
+    gdb_test_exact "maint demangle __apl__FR2T2i" "operator+=(T2 &, int)"
+    gdb_test_exact "maint demangle __nw__2T1SFUi" "T1::operator new(unsigned int) static"
+    gdb_test_exact "maint demangle __dl__2T1SFPv" "T1::operator delete(void *) static"
+    gdb_test_exact "maint demangle put__2T7SFi" "T7::put(int) static"
+
+    gdb_test_exact "maint demangle h__FUc" "h(unsigned char)"
+    gdb_test_exact "maint demangle f__Fic" "f(int, char)"
+    gdb_test_exact "maint demangle h__FUi" "h(unsigned int)"
+    gdb_test_exact "maint demangle h__Fci" "h(char, int)"
+    gdb_test_exact "maint demangle h__FUl" "h(unsigned long)"
+    gdb_test_exact "maint demangle h__Fcl" "h(char, long)"
+    gdb_test_exact "maint demangle h__FUs" "h(unsigned short)"
+    gdb_test_exact "maint demangle h__Fcs" "h(char, short)"
+    gdb_test "maint dem __amd__FR2T2RC2T2" \
+	"operator%=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __adv__FR2T2RC2T2" \
+	"operator/=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __amu__FR2T2RC2T2" \
+	"operator\[*\]+=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ami__FR2T2RC2T2" \
+	"operator-=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __apl__FR2T2RC2T2" \
+	"operator\[+\]+=\[(\]+T2 &, (const T2|T2 const) &\[)\]+"
+
+    gdb_test "maint dem g__F1SRPUlRPCUlT2" \
+	"g\[(\]+S, unsigned long \[*\]+&, (const unsigned long|unsigned long const) \[*\]+&, unsigned long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUiRPCUiT2" \
+	"g\[(\]+S, unsigned int \[*\]+&, (const unsigned int|unsigned int const) \[*\]+&, unsigned int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUsRPCUsT2" \
+	"g\[(\]+S, unsigned short \[*\]+&, (const unsigned short|unsigned short const) \[*\]+&, unsigned short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1SRPUcRPCUcT2" \
+	"g\[(\]+S, unsigned char \[*\]+&, (const unsigned char|unsigned char const) \[*\]+&, unsigned char \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPlRPClT3" \
+	"g\[(\]+T, S, long \[*\]+&, (const long|long const) \[*\]+&, long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPiRPCiT3" \
+	"g\[(\]+T, S, int \[*\]+&, (const int|int const) \[*\]+&, int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1SRPcRPCcT3" \
+	"g\[(\]+T, S, char \[*\]+&, (const char|char const) \[*\]+&, char \[*\]+&\[)\]+"
+
+
+    gdb_test "maint dem __gt__FRC2T2T1" \
+	"operator>\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ge__FRC2T2T1" \
+	"operator>=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __lt__FRC2T2T1" \
+	"operator<\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __le__FRC2T2T1" \
+	"operator<=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ne__FRC2T2T1" \
+	"operator!=\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __eq__FRC2T2T1" \
+	"operator==\[(\]+(const T2|T2 const) &, (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem g__FcR1cRC1cT2" \
+	"g\[(\]+char, c &, (const c|c const) &, c &\[)\]+"
+    gdb_test "maint dem g__FcRPdRPCdT2" \
+	"g\[(\]+char, double *\[*\]+&, (const double|double const) *\[*\]+&, double *\[*\]+&\[)\]+"
+    gdb_test "maint dem g__FcRPfRPCfT2" \
+	"g\[(\]+char, float *\[*\]+&, (const float|float const) *\[*\]+&, float *\[*\]+&\[)\]+"
+    gdb_test_exact "maint demangle h__FcT1" "h(char, char)"
+    gdb_test_exact "maint demangle f__Ficd" "f(int, char, double)"
+    gdb_test "maint dem g__F1T1SdRPsRPCsT4" \
+	"g\[(\]+T, S, double, short \[*\]+&, (const short|short const) \[*\]+&, short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1cC1cT1" \
+	"g\[(\]+c, (const c|c const), c\[)\]+"
+    gdb_test "maint dem g__FPdPCdT1" \
+	"g\[(\]+double *\[*\]+, (const double|double const) *\[*\]+, double *\[*\]+\[)\]+"
+    gdb_test "maint dem g__FPfPCfT1" \
+	"g\[(\]+float *\[*\]+, (const float|float const) *\[*\]+, float *\[*\]+\[)\]+"
+
+    gdb_test "maint dem g__FUlCUlT1" \
+	"g\[(\]+unsigned long, (const unsigned long|unsigned long const), unsigned long\[)\]+"
+    gdb_test "maint dem g__FPlPClT1" \
+	"g\[(\]+long \[*\]+, (const long|long const) \[*\]+, long \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUiCUiT1" \
+	"g\[(\]+unsigned int, (const unsigned int|unsigned int const), unsigned int\[)\]+"
+    gdb_test "maint dem g__FPiPCiT1" \
+	"g\[(\]+int \[*\]+, (const int|int const) \[*\]+, int \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUsCUsT1" \
+	"g\[(\]+unsigned short, (const unsigned short|unsigned short const), unsigned short\[)\]+"
+    gdb_test "maint dem g__FPsPCsT1" \
+	"g\[(\]+short \[*\]+, (const short|short const) \[*\]+, short \[*\]+\[)\]+"
+    gdb_test "maint dem g__FUcCUcT1" \
+	"g\[(\]+unsigned char, (const unsigned char|unsigned char const), unsigned char\[)\]+"
+    gdb_test "maint dem g__FPcPCcT1" \
+	"g\[(\]+char \[*\]+, (const char|char const) \[*\]+, char \[*\]+\[)\]+"
+    gdb_test "maint dem g__F1TlClT2" \
+	"g\[(\]+T, long, (const long|long const), long\[)\]+"
+    gdb_test "maint dem g__F1TiCiT2" \
+	"g\[(\]+T, int, (const int|int const), int\[)\]+"
+    gdb_test "maint dem g__F1TsCsT2" \
+	"g\[(\]+T, short, (const short|short const), short\[)\]+"
+    gdb_test "maint dem g__F1TcCcT2" \
+	"g\[(\]+T, char, (const char|char const), char\[)\]+"
+
+    gdb_test "maint dem printf__FPCce" \
+	"printf\[(\]+(const char|char const) \[*\]+,...\[)\]+"
+
+
+    gdb_test "maint dem g__F1SRUlRCUlT2" \
+	"g\[(\]+S, unsigned long &, (const unsigned long|unsigned long const) &, unsigned long &\[)\]+"
+    gdb_test "maint dem g__F1SRPlRPClT2" \
+	"g\[(\]+S, long \[*\]+&, (const long|long const) \[*\]+&, long \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUiRCUiT2" \
+	"g\[(\]+R, unsigned int &, (const unsigned int|unsigned int const) &, unsigned int &\[)\]+"
+    gdb_test "maint dem g__F1SRPiRPCiT2" \
+	"g\[(\]+S, int \[*\]+&, (const int|int const) \[*\]+&, int \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUsRCUsT2" \
+	"g\[(\]+R, unsigned short &, (const unsigned short|unsigned short const) &, unsigned short &\[)\]+"
+    gdb_test "maint dem g__F1SRPsRPCsT2" \
+	"g\[(\]+S, short \[*\]+&, (const short|short const) \[*\]+&, short \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1RRUcRCUcT2" \
+	"g\[(\]+R, unsigned char &, (const unsigned char|unsigned char const) &, unsigned char &\[)\]+"
+    gdb_test "maint dem g__F1SRPcRPCcT2" \
+	"g\[(\]+S, char \[*\]+&, (const char|char const) \[*\]+&, char \[*\]+&\[)\]+"
+    gdb_test "maint dem g__F1T1RRlRClT3" \
+	"g\[(\]+T, R, long &, (const long|long const) &, long &\[)\]+"
+    gdb_test "maint dem g__F1T1RRiRCiT3" \
+	"g\[(\]+T, R, int &, (const int|int const) &, int &\[)\]+"
+    gdb_test "maint dem g__F1T1RRsRCsT3" \
+	"g\[(\]+T, R, short &, (const short|short const) &, short &\[)\]+"
+    gdb_test "maint dem g__F1T1RRcRCcT3" \
+	"g\[(\]+T, R, char &, (const char|char const) &, char &\[)\]+"
+
+
+    gdb_test_exact "maint demangle f__FicdPcPFci_v" "f(int, char, double, char *, void (*)(char, int))"
+    gdb_test_exact "maint demangle f__FicdPcPFic_v" "f(int, char, double, char *, void (*)(int, char))"
+    gdb_test_exact "maint demangle get__2T7SFv" "T7::get(void) static"
+
+
+    gdb_test "maint dem g__FcRdRCdT2" \
+	"g\[(\]+char, double &, (const double|double const) &, double &\[)\]+"
+    gdb_test "maint dem g__FcRfRCfT2" \
+	"g\[(\]+char, float &, (const float|float const) &, float &\[)\]+"
+    gdb_test "maint dem __md__FC2T2i" \
+	"operator%\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __dv__FC2T2i" \
+	"operator/\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __ml__FC2T2i" \
+	"operator\[*\]+\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __mi__FC2T2i" \
+	"operator-\[(\]+(const T2|T2 const), int\[)\]+"
+    gdb_test "maint dem __pl__FC2T2i" \
+	"operator\[+\]+\[(\]+(const T2|T2 const), int\[)\]+"
+
+
+    gdb_test_exact "maint demangle h__Fc" "h(char)"
+    gdb_test_exact "maint demangle h__Fd" "h(double)"
+    gdb_test_exact "maint demangle h__Ff" "h(float)"
+    gdb_test_exact "maint demangle h__Fi" "h(int)"
+    gdb_test_exact "maint demangle f__Fi" "f(int)"
+    gdb_test_exact "maint demangle h__Fl" "h(long)"
+
+    gdb_test_exact "maint demangle h__Fs" "h(short)"
+    gdb_test "maint dem __md__FC2T2RC2T2" \
+	"operator%\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __dv__FC2T2RC2T2" \
+	"operator/\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __ml__FC2T2RC2T2" \
+	"operator\[*\]+\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __mi__FC2T2RC2T2" \
+	"operator-\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem __pl__FC2T2RC2T2" \
+	"operator\[+\]+\[(\]+(const T2|T2 const), (const T2|T2 const) &\[)\]+"
+    gdb_test "maint dem g__FcRP1cRPC1cT2" \
+	"g\[(\]+char, c *\[*\]+&, (const c|c const) *\[*\]+&, c *\[*\]+&\[)\]+"
+
+
+    gdb_test "maint dem g__FdCdT1" \
+	"g\[(\]+double, (const double|double const), double\[)\]+"
+    gdb_test "maint dem g__FfCfT1" \
+	"g\[(\]+float, (const float|float const), float\[)\]+"
+    gdb_test "maint dem g__FlClT1" \
+	"g\[(\]+long, (const long|long const), long\[)\]+"
+    gdb_test "maint dem g__FiCiT1" \
+	"g\[(\]+int, (const int|int const), int\[)\]+"
+    gdb_test "maint dem g__FsCsT1" \
+	"g\[(\]+short, (const short|short const), short\[)\]+"
+    gdb_test "maint dem g__FcCcT1" \
+	"g\[(\]+char, (const char|char const), char\[)\]+"
+
+
+    gdb_test_exact "maint demangle f__FicdPc" "f(int, char, double, char *)"
+    gdb_test_exact "maint demangle __nw__FUi" "operator new(unsigned int)"
+    gdb_test_exact "maint demangle __ct__Q3_2T11a1bSFi" "T1::a::b::b(int) static"
+    gdb_test_exact "maint demangle __dt__Q3_2T11a1bSFi" "T1::a::b::~b(int) static"
+    gdb_test_exact "maint demangle put__Q3_2T11a1bSFi" "T1::a::b::put(int) static"
+    gdb_test_exact "maint demangle get__Q2_2T11aSFv" "T1::a::get(void) static"
+    gdb_test_exact "maint demangle put__2T1SFi" "T1::put(int) static"
+    gdb_test_exact "maint demangle put__Q5_2T11a1b1c1dSFi" "T1::a::b::c::d::put(int) static"
+    gdb_test_exact "maint demangle get__Q4_2T11a1b1cSFv" "T1::a::b::c::get(void) static"
+    gdb_test_exact "maint demangle put__Q2_2T11aSFi" "T1::a::put(int) static"
+    gdb_test_exact "maint demangle put__Q4_2T11a1b1cSFi" "T1::a::b::c::put(int) static"
+    gdb_test_exact "maint demangle get__Q3_2T11a1bSFv" "T1::a::b::get(void) static"
+    gdb_test_exact "maint demangle get__2T1SFv" "T1::get(void) static"
+    gdb_test_exact "maint demangle get__Q5_2T11a1b1c1dSFv" "T1::a::b::c::d::get(void) static"
+
+
+    gdb_test_exact "maint demangle bar__3fooFPv"       "foo::bar(void *)"
+    gdb_test "maint dem bar__3fooFPCv" \
+	     "foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+"
+    gdb_test_exact "maint demangle bar__3fooCFPv"      "foo::bar(void *) const"
+    gdb_test "maint dem bar__3fooCFPCv" \
+	    "foo::bar\[(\]+(const void|void const) *\[*\]+\[)\]+ const"
+    gdb_test_exact "maint demangle __eq__3fooFR3foo"   "foo::operator==(foo &)"
+    gdb_test "maint dem __eq__3fooFRC3foo" \
+	 "foo::operator==\[(\]+(const foo|foo const) &\[)\]+"
+    gdb_test_exact "maint demangle __eq__3fooCFR3foo"  "foo::operator==(foo &) const"
+    gdb_test "maint dem __eq__3fooCFRC3foo" \
+	"foo::operator==\[(\]+(const foo|foo const) &\[)\]+ const"
+
+    gdb_test_exact "maint demangle bar__3fooFiT16FooBar" "foo::bar(int, int, FooBar)"
+
+    gdb_test_exact "maint demangle bar__3fooFPiN51PdN37PcN211T1iN215" \
+      "foo::bar(int *, int *, int *, int *, int *, int *, double *, double *, double *, double *, char *, char *, char *, int *, int, int, int)"
+
+
+    # HP aCC specific tests. HP aCC demangling does not use __pt__ for
+    # template specifications.  There are other differences as well.
+
+    gdb_test_exact "maint demangle __dt__2T5XTPFiPPdPv_i__Fv" "T5<int (*)(int, double **, void *)>::~T5(void)"
+
+    gdb_test_exact "maint demangle __ct__1cFi" "c::c(int)"
+
+    gdb_test_exact "maint demangle __dt__2T5XTi__Fv" "T5<int>::~T5(void)"
+
+    gdb_test_exact "maint demangle __dt__2T5XTc__Fv" "T5<char>::~T5(void)"
+
+    gdb_test_exact "maint demangle __ct__2T2Fi" "T2::T2(int)"
+    gdb_test_exact "maint demangle __dt__2T1Fv" "T1::~T1(void)"
+
+    gdb_test_exact "maint demangle __dt__2T5XT1x__Fv" "T5<x>::~T5(void)"
+
+    gdb_test_exact "maint demangle __dt__2T5XTPFcPv_i__Fv" "T5<int (*)(char, void *)>::~T5(void)"
+    
+    gdb_test_exact "maint demangle __ct__2T5XTPFiPPdPv_i__Fi" "T5<int (*)(int, double **, void *)>::T5(int)"
+
+    gdb_test_exact "maint demangle __dl__2T5XT1x__SFPv" "T5<x>::operator delete(void *) static"
+    
+    gdb_test_exact "maint demangle X__2T5XT1x" "T5<x>::X"
+
+    gdb_test_exact "maint demangle __ct__2T5XTi__Fi" "T5<int>::T5(int)"
+
+    gdb_test_exact "maint demangle __ct__2T5XTc__Fi" "T5<char>::T5(int)"
+
+    gdb_test_exact "maint demangle __dl__2T5XTPFcPv_i__SFPv" "T5<int (*)(char, void *)>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle X__2T5XTPFcPv_i" "T5<int (*)(char, void *)>::X"
+
+    gdb_test_exact "maint demangle __ct__2T5XT1x__Fi" "T5<x>::T5(int)"
+
+    gdb_test_exact "maint demangle __dl__2T5XTPFiPPdPv_i__SFPv" "T5<int (*)(int, double **, void *)>::operator delete(void *) static"
+    gdb_test_exact "maint demangle X__2T5XTPFiPPdPv_i" "T5<int (*)(int, double **, void *)>::X"
+
+    gdb_test_exact "maint demangle __dl__2T5XTi__SFPv" "T5<int>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle __dl__2T5XTc__SFPv" "T5<char>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle X__2T5XTc" "T5<char>::X"
+
+    gdb_test_exact "maint demangle X__2T5XTi" "T5<int>::X"
+
+    gdb_test_exact "maint demangle __ct__2T5XTPFcPv_i__Fi" "T5<int (*)(char, void *)>::T5(int)"
+    
+    gdb_test_exact "maint demangle __dt__2T1XTc__Fv" "T1<char>::~T1(void)"
+
+    gdb_test_exact "maint demangle __dt__2T1XT1t__Fv" "T1<t>::~T1(void)"
+
+    gdb_test_exact "maint demangle __dl__2T1XT1t__SFPv" "T1<t>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle __ct__2T1XTc__Fi" "T1<char>::T1(int)"
+
+    gdb_test_exact "maint demangle __ct__2T1XTc__Fv" "T1<char>::T1(void)"
+
+    gdb_test_exact "maint demangle __ct__2T1XT1t__Fi" "T1<t>::T1(int)"
+
+    gdb_test_exact "maint demangle __ct__2T1XT1t__Fv" "T1<t>::T1(void)"
+
+    gdb_test_exact "maint demangle __dl__2T1XTc__SFPv" "T1<char>::operator delete(void *) static"
+
+    gdb_test_exact "maint demangle elem__6vectorXTd__Fi" "vector<double>::elem(int)"
+
+    gdb_test_exact "maint demangle elem__6vectorXTi__Fi" "vector<int>::elem(int)"
+
+    gdb_test_exact "maint demangle __ct__6vectorXTd__Fi" "vector<double>::vector(int)"
+
+    gdb_test_exact "maint demangle __ct__6vectorXTi__Fi" "vector<int>::vector(int)"
+
+    gdb_test_exact "maint demangle __ct__9DListNodeXTR6RLabel__FR6RLabelP9DListNodeXTR6RLabel_T2" \
+	"DListNode<RLabel &>::DListNode(RLabel &, DListNode<RLabel &> *, DListNode<RLabel &> *)"
+
+
+    # Absolute integer constants in template args
+
+    gdb_test_exact "maint demangle elem__6vectorXTiUP34__Fi" "vector<int,34U>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXUP2701Td__Fi" "vector<2701U,double>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXTiSP334__Fi" "vector<int,334>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXTiSN67__Fi" "vector<int,-67>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXTiSM__SCFPPd" "vector<int,-2147483648>::elem(double **) static const"
+    gdb_test_exact "maint demangle elem__6vectorXTiSN67UP4000TRs__Fi" "vector<int,-67,4000U,short &>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXTiSN67TRdTFPv_i__Fi" "vector<int,-67,double &,int (void *)>::elem(int)"
+    gdb_test_exact "maint demangle X__6vectorXTiSN67TdTPvUP5TRs" "vector<int,-67,double,void *,5U,short &>::X"
+
+    # Named constants in template args
+
+    gdb_test_exact "maint demangle elem__6vectorXTiA3foo__Fi" "vector<int,&foo>::elem(int)"
+    gdb_test_exact "maint demangle elem__6vectorXTiA3fooTPvA5Label__FiPPvT2" "vector<int,&foo,void *,&Label>::elem(int, void **, void **)"
+    gdb_test_exact "maint demangle elem__6vectorXTiSN42A3foo__Fi" "vector<int,-42,&foo>::elem(int)"
+
+    # Alternate entry points for functions
+
+    gdb_test_exact "maint demangle __ct__2T5XTPFcPv_i__Fi_2" "T5<int (*)(char, void *)>::T5(int)"
+    gdb_test_exact "maint demangle __ct__2T5XTPFcPv_i__Fi_19" "T5<int (*)(char, void *)>::T5(int)"
+    gdb_test_exact "maint demangle f__FicdPcPFci_v_34" "f(int, char, double, char *, void (*)(char, int))"
+
+
+    # Template partial specializations
+
+# FIXME!  The # characters don't go through expect, and backslashes don't seem to work.
+#    gdb_test_exact "maint demangle spec__13Spec<#1,#1.*>XTiTPi_FPi" "Spec<int,int *>::spec(int *)"
+#    gdb_test_exact "maint demangle spec__16Spec<#1,#1.&,#1>XTiTRiTi_FPi" "Spec<int,int &, int>::spec(int *)"
+# Fake test -- replace # with %
+    gdb_test_exact "maint demangle spec__13Spec<%1,%1.*>XTiTPi_FPi" "Spec<int,int *>::spec(int *)"
+    gdb_test_exact "maint demangle spec__16Spec<%1,%1.&,%1>XTiTRiTi_FPi" "Spec<int,int &,int>::spec(int *)"
+
+    # Global template functions
+
+    gdb_test_exact "maint demangle add__XTc_FcT1" "add<char>(char, char)"
+    gdb_test_exact "maint demangle add__XTcSP9A5label_FcPPlT1" "add<char,9,&label>(char, long **, char)"
+    gdb_test_exact "maint demangle add__XTPfTFPd_f_FcT1" "add<float *,float (double *)>(char, char)"
+
+    # Template for template arg
+
+    gdb_test_exact "maint demangle unLink__12basic_stringXTcT18string_char_traitsXTc_T9allocator_Fv" "basic_string<char,string_char_traits<char>,allocator>::unLink(void)"
+
+}
+# Test support for different demangling styles.  Note that this does
+# not depend upon running the test program and does not depend upon
+# gdb being able to lookup any C++ symbols.  It simply calls the 
+# internal demangler with synthesized strings and tests the results.
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+    
+    test_lucid_style_demangling
+    test_gnu_style_demangling
+    test_arm_style_demangling
+    test_hp_style_demangling
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.c++/derivation.cc b/gdb/testsuite/gdb.c++/derivation.cc
new file mode 100644
index 0000000..99efa76
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/derivation.cc
@@ -0,0 +1,240 @@
+class A {
+public:
+    int a;
+    int aa;
+
+    A()
+    {
+        a=1;
+        aa=2;
+    }
+    int afoo();
+    int foo();
+    
+};
+
+
+
+class B {
+public:
+    int b;
+    int bb;
+
+    B()
+    {
+        b=3;
+        bb=4;
+    }
+    int bfoo();
+    int foo();
+    
+};
+
+
+
+class C {
+public:
+    int c;
+    int cc;
+
+    C()
+    {
+        c=5;
+        cc=6;
+    }
+    int cfoo();
+    int foo();
+    
+};
+
+
+
+class D : private A, public B, protected C {
+public:
+    int d;
+    int dd;
+
+    D()
+    {
+        d =7;
+        dd=8;
+    }
+    int dfoo();
+    int foo();
+    
+};
+
+
+class E : public A, B, protected C {
+public:
+    int e;
+    int ee;
+
+    E()
+    {
+        e =9;
+        ee=10;
+    }
+    int efoo();
+    int foo();
+    
+};
+
+
+class F : A, public B, C {
+public:
+    int f;
+    int ff;
+
+    F()
+    {
+        f =11;
+        ff=12;
+    }
+    int ffoo();
+    int foo();
+    
+};
+
+class G : private A, public B, protected C {
+public:
+    int g;
+    int gg;
+    int a;
+    int b;
+    int c;
+
+    G()
+    {
+        g =13;
+        gg =14;
+        a=15;
+        b=16;
+        c=17;
+        
+    }
+    int gfoo();
+    int foo();
+    
+};
+
+
+
+
+int A::afoo() {
+    return 1;
+}
+
+int B::bfoo() {
+    return 2;
+}
+
+int C::cfoo() {
+    return 3;
+}
+
+int D::dfoo() {
+    return 4;
+}
+
+int E::efoo() {
+    return 5;
+}
+
+int F::ffoo() {
+    return 6;
+}
+
+int G::gfoo() {
+    return 77;
+}
+
+int A::foo()
+{
+    return 7;
+    
+}
+
+int B::foo()
+{
+    return 8;
+    
+}
+
+int C::foo()
+{
+    return 9;
+    
+}
+
+int D::foo()
+{
+    return 10;
+    
+}
+
+int E::foo()
+{
+    return 11;
+    
+}
+
+int F::foo()
+{
+    return 12;
+    
+}
+
+int G::foo()
+{
+    return 13;
+    
+}
+
+
+void marker1()
+{
+}
+
+
+int main(void)
+{
+
+    A a_instance;
+    B b_instance;
+    C c_instance;
+    D d_instance;
+    E e_instance;
+    F f_instance;
+    G g_instance;
+    
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+    
+
+    marker1();
+    
+    a_instance.a = 20;
+    a_instance.aa = 21;
+    b_instance.b = 22;
+    b_instance.bb = 23;
+    c_instance.c = 24;
+    c_instance.cc = 25;
+    d_instance.d = 26;
+    d_instance.dd = 27;
+    e_instance.e = 28;
+    e_instance.ee =29;
+    f_instance.f =30;
+    f_instance.ff =31;
+    
+    
+    
+
+    return 0;
+    
+}
+
+    
+    
diff --git a/gdb/testsuite/gdb.c++/derivation.exp b/gdb/testsuite/gdb.c++/derivation.exp
new file mode 100644
index 0000000..ed3cc2c
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/derivation.exp
@@ -0,0 +1,316 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+
+#
+# tests for inheritance, with several derivations types combinations (private,
+# public, protected) 
+# classes have simple members and member functions.
+# 
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "derivation"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+remote_file build delete ${binfile}.ci
+ if {![istarget "hppa*-*-hpux*"]} {
+     if  { [gdb_compile "${srcdir}/${subdir}/compiler.cc" "${binfile}.ci" preprocess ""] != ""
+} {
+         gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will auto
+matically fail."
+     }
+ } else {
+     if { [gdb_preprocess "${srcdir}/${subdir}/compiler.cc" "${binfile}.ci" "c++"] != "" } {
+         perror "Couldn't make ${binfile}.ci file"
+         return 1;
+     }
+ }
+ 
+source ${binfile}.ci
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+
+
+send_gdb "print a_instance\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{a = 1, aa = 2\}\r\n$gdb_prompt $" {
+        pass "print value of a_instance"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of a_instance" }
+    timeout           { fail "(timeout) print value of a_instance" }
+  }
+
+
+send_gdb "ptype a_instance\n"
+gdb_expect {
+    -re "type = class A \{\r\n\[\t \]*public:\r\n\[\t \]*int a;\r\n\[\t \]*int aa;\[\r\n\t \]+A\\(void\\);\r\n\[\t \]*int afoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype a_instance" }
+    -re ".*$gdb_prompt $"   {  fail "ptype a_instance" }
+    timeout             { fail "(timeout) ptype a_instance" }
+}
+
+
+send_gdb "print d_instance\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{<A> = \{a = 1, aa = 2\}, <B> = \{b = 3, bb = 4\}, <C> = \{c = 5, cc = 6\}, d = 7, dd = 8\}\r\n$gdb_prompt $" {
+        pass "print value of d_instance"
+      }
+    -re ".\[0-9\]* = \{<class A> = \{a = 1, aa = 2\}, <class B> = \{b = 3, bb = 4\}, <class C> = \{c = 5, cc = 6\}, d = 7, dd = 8\}\r\n$gdb_prompt $" {
+        pass "print value of d_instance"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance" }
+    timeout           { fail "(timeout) print value of d_instance" }
+  }
+
+  if {$gcc_compiled} then {
+      send_gdb "ptype d_instance\n"
+      gdb_expect {
+	  -re "type = class D : private A, public B, private C \{\r\n\[\t \]*public:\r\n\[\t \]*int d;\r\n\[\t \]*int dd;\[\r\n\t \]+D\\(void\\);\r\n\[\t \]*int dfoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype d_instance" }
+	  -re ".*$gdb_prompt $"   {  fail "ptype d_instance" }
+	  timeout             { fail "(timeout) ptype d_instance" }
+      }
+  } else {
+      send_gdb "ptype d_instance\n"
+      gdb_expect {
+	  -re "type = class D : private A, public B, protected C \{\r\n\[\t \]*public:\r\n\[\t \]*int d;\r\n\[\t \]*int dd;\[\r\n\t \]+D\\(void\\);\r\n\[\t \]*int dfoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype d_instance" }
+	  -re ".*$gdb_prompt $"   {  fail "ptype d_instance" }
+	  timeout             { fail "(timeout) ptype d_instance" }
+      }
+  }
+
+
+send_gdb "print e_instance\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{<A> = \{a = 1, aa = 2\}, <B> = \{b = 3, bb = 4\}, <C> = \{c = 5, cc = 6\}, e = 9, ee = 10\}\r\n$gdb_prompt $" {
+        pass "print value of e_instance"
+      }
+    -re ".\[0-9\]* = \{<class A> = \{a = 1, aa = 2\}, <class B> = \{b = 3, bb = 4\}, <class C> = \{c = 5, cc = 6\}, e = 9, ee = 10\}\r\n$gdb_prompt $" {
+        pass "print value of e_instance"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of e_instance" }
+    timeout           { fail "(timeout) print value of e_instance" }
+  }
+
+  if {$gcc_compiled} {
+      send_gdb "ptype e_instance\n"
+      gdb_expect {
+	  -re "type = class E : public A, private B, private C \{\r\n\[\t \]*public:\r\n\[\t \]*int e;\r\n\[\t \]*int ee;\[\r\n\t \]+E\\(void\\);\r\n\[\t \]*int efoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype e_instance" }
+	  -re ".*$gdb_prompt $"   {  fail "ptype e_instance" }
+	  timeout             { fail "(timeout) ptype e_instance" }
+      }
+  } else {
+      send_gdb "ptype e_instance\n"
+      gdb_expect {
+	  -re "type = class E : public A, private B, protected C \{\r\n\[\t \]*public:\r\n\[\t \]*int e;\r\n\[\t \]*int ee;\[\r\n\t \]+E\\(void\\);\r\n\[\t \]*int efoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype e_instance" }
+	  -re ".*$gdb_prompt $"   {  fail "ptype e_instance" }
+	  timeout             { fail "(timeout) ptype e_instance" }
+      }
+  }
+
+
+send_gdb "print f_instance\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{<A> = \{a = 1, aa = 2\}, <B> = \{b = 3, bb = 4\}, <C> = \{c = 5, cc = 6\}, f = 11, ff = 12\}\r\n$gdb_prompt $" {
+        pass "print value of f_instance"
+      }
+    -re ".\[0-9\]* = \{<class A> = \{a = 1, aa = 2\}, <class B> = \{b = 3, bb = 4\}, <class C> = \{c = 5, cc = 6\}, f = 11, ff = 12\}\r\n$gdb_prompt $" {
+        pass "print value of f_instance"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of f_instance" }
+    timeout           { fail "(timeout) print value of f_instance" }
+  }
+
+send_gdb "ptype f_instance\n"
+gdb_expect {
+    -re "type = class F : private A, public B, private C \{\r\n\[\t \]*public:\r\n\[\t \]*int f;\r\n\[\t \]*int ff;\[\r\n\t \]+F\\(void\\);\r\n\[\t \]*int ffoo\\(void\\);\r\n\[\t \]*int foo\\(void\\);\r\n\}.*$gdb_prompt $"  { pass "ptype f_instance" }
+    -re ".*$gdb_prompt $"   {  fail "ptype f_instance" }
+    timeout             { fail "(timeout) ptype f_instance" }
+}
+
+
+
+send_gdb "print d_instance.a\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of d_instance.a"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.a" }
+    timeout           { fail "(timeout) print value of d_instance.a" }
+  }
+
+send_gdb "print d_instance.aa\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of d_instance.aa"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.aa" }
+    timeout           { fail "(timeout) print value of d_instance.aa" }
+  }
+
+send_gdb "print d_instance.b\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of d_instance.b"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.b" }
+    timeout           { fail "(timeout) print value of d_instance.b" }
+  }
+
+send_gdb "print d_instance.bb\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4.*$gdb_prompt $" {
+        pass "print value of d_instance.bb"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.bb" }
+    timeout           { fail "(timeout) print value of d_instance.bb" }
+  }
+
+send_gdb "print d_instance.c\n"
+gdb_expect {
+    -re ".\[0-9\]* = 5.*$gdb_prompt $" {
+        pass "print value of d_instance.c"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.c" }
+    timeout           { fail "(timeout) print value of d_instance.c" }
+  }
+
+send_gdb "print d_instance.cc\n"
+gdb_expect {
+    -re ".\[0-9\]* = 6.*$gdb_prompt $" {
+        pass "print value of d_instance.cc"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.cc" }
+    timeout           { fail "(timeout) print value of d_instance.cc" }
+  }
+
+send_gdb "print d_instance.d\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7.*$gdb_prompt $" {
+        pass "print value of d_instance.d"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.d" }
+    timeout           { fail "(timeout) print value of d_instance.d" }
+  }
+
+send_gdb "print d_instance.dd\n"
+gdb_expect {
+    -re ".\[0-9\]* = 8.*$gdb_prompt $" {
+        pass "print value of d_instance.dd"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of d_instance.dd" }
+    timeout           { fail "(timeout) print value of d_instance.dd" }
+  }
+
+send_gdb "print g_instance.a\n"
+gdb_expect {
+    -re ".\[0-9\]* = 15.*$gdb_prompt $" {
+        pass "print value of g_instance.a"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.a" }
+    timeout           { fail "(timeout) print value of g_instance.a" }
+  }
+
+send_gdb "print g_instance.b\n"
+gdb_expect {
+    -re ".\[0-9\]* = 16.*$gdb_prompt $" {
+        pass "print value of g_instance.b"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.b" }
+    timeout           { fail "(timeout) print value of g_instance.b" }
+  }
+
+send_gdb "print g_instance.c\n"
+gdb_expect {
+    -re ".\[0-9\]* = 17.*$gdb_prompt $" {
+        pass "print value of g_instance.c"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.c" }
+    timeout           { fail "(timeout) print value of g_instance.c" }
+  }
+
+send_gdb "print g_instance.afoo()\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of g_instance.afoo()"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.afoo()" }
+    timeout           { fail "(timeout) print value of g_instance.afoo()" }
+  }
+
+send_gdb "print g_instance.bfoo()\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of g_instance.bfoo()"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.bfoo()" }
+    timeout           { fail "(timeout) print value of g_instance.bfoo()" }
+  }
+
+send_gdb "print g_instance.cfoo()\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of g_instance.cfoo()"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of g_instance.cfoo()" }
+    timeout           { fail "(timeout) print value of g_instance.cfoo()" }
+  }
diff --git a/gdb/testsuite/gdb.c++/inherit.exp b/gdb/testsuite/gdb.c++/inherit.exp
new file mode 100644
index 0000000..8c7a90c
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/inherit.exp
@@ -0,0 +1,859 @@
+# Copyright (C) 1992, 1993, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+set nl "\[\r\n\]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+# Note - create separate "inherit" executable from misc.cc
+
+set testfile "inherit"
+set srcfile misc.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1
+}
+
+# if we are on HPUX and we are not compiled with gcc, then skip these tests.
+
+if [istarget hppa*-*-hpux*] {
+    if {!$gcc_compiled} {
+	continue 
+    }
+}
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Single inheritance, print individual members.
+#
+
+proc test_print_si_members {} {
+    # Print all members of g_A using fully qualified form.
+
+    gdb_test "print g_A.A::a" ".* = 1" "print g_A.A::a"
+
+    gdb_test "print g_A.A::x" ".* = 2" "print g_A.A::x"
+
+    # Print members of g_A using nonambiguous compact form.
+
+    gdb_test "print g_A.a" ".* = 1" "print g_A.a"
+
+    gdb_test "print g_A.x" ".* = 2" "print g_A.x"
+
+    # Print all members of g_B using fully qualified form.
+
+    gdb_test "print g_B.A::a" ".* = 3" "print g_B.A::a"
+
+    gdb_test "print g_B.A::x" ".* = 4" "print g_B.A::x"
+
+    gdb_test "print g_B.B::b" ".* = 5" "print g_B.B::b"
+
+    gdb_test "print g_B.B::x" ".* = 6" "print g_B.B::x"
+
+    # Print members of g_B using nonambiguous compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_B.a" ".* = 3" "print g_B.a"
+
+    gdb_test "print g_B.b" ".* = 5" "print g_B.b"
+
+    gdb_test "print g_B.x" ".* = 6" "print g_B.x"
+
+    # Print all members of g_C using fully qualified form.
+
+    gdb_test "print g_C.A::a" ".* = 7" "print g_C.A::a"
+
+    gdb_test "print g_C.A::x" ".* = 8" "print g_C.A::x"
+
+    gdb_test "print g_C.C::c" ".* = 9" "print g_C.C::c"
+
+    gdb_test "print g_C.C::x" ".* = 10" "print g_C.C::x"
+
+    # Print members of g_C using nonambiguous compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_C.a" ".* = 7" "print g_C.a"
+
+    gdb_test "print g_C.c" ".* = 9" "print g_C.c"
+
+    gdb_test "print g_C.x" ".* = 10" "print g_C.x"
+}
+
+#
+# Single inheritance, print type definitions.
+#
+
+proc test_ptype_si {} {
+    global gdb_prompt
+    global ws
+    global nl
+
+    # Print class A as a type.
+
+    send_gdb "ptype A\n"
+    gdb_expect {
+	-re "type = class A \{$nl.*\[ \]*int a;$nl\[ \]*int x;$nl.*\[ \]*\}$nl$gdb_prompt $" {
+	    pass "ptype A (FIXME)"
+	}
+	-re "type = struct A \{$nl\[ \]*int a;$nl\[ \]*int x;$nl\[ \]*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype A" }
+	timeout { fail "ptype A (timeout)" ; return }
+    }
+
+    # Print class A as an explicit class.
+
+    send_gdb "ptype class A\n"
+    gdb_expect {
+	-re "type = class A \{$nl.*\[ \]*int a;$nl\[ \]*int x;$nl.*\[ \]*\}$nl$gdb_prompt $" {
+	    pass "ptype class A (FIXME)"
+	}
+	-re "type = struct A \{$nl\[ \]*int a;$nl\[ \]*int x;$nl\[ \]*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class A" }
+	timeout { fail "ptype class A (timeout)" ; return }
+    }
+
+    # Print type of an object of type A.
+
+    send_gdb "ptype g_A\n"
+    gdb_expect {
+	-re "type = class A \{$nl.*\[ \]*int a;$nl\[ \]*int x;$nl.*\[ \]*\}$nl$gdb_prompt $" {
+	    pass "ptype g_A (FIXME)"
+	}
+	-re "type = struct A \{$nl\[ \]*int a;$nl\[ \]*int x;$nl\[ \]*\}$nl$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype g_A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype g_A" }
+	timeout { fail "ptype g_A (timeout)" ; return }
+    }
+
+    # Print class B as a type.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype B" "type = class B : public A \{$nl\[ \]*public:$nl\[ \]*int b;$nl\[ \]*int x;$nl.*\}" "ptype B"
+
+    # Print class B as an explicit class.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class B" "type = class B : public A \{$nl\[ \]*public:$nl\[ \]*int b;$nl\[ \]*int x;$nl.*\}" "ptype class B"
+
+    # Print type of an object of type B.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_B" "type = class B : public A \{$nl\[ \]*public:$nl\[ \]*int b;$nl\[ \]*int x;$nl.*\}" "ptype g_B"
+
+    # Print class C as a type.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype C" "type = class C : public A \{$nl\[ \]*public:$nl\[ \]*int c;$nl\[ \]*int x;$nl.*\}" "ptype C"
+
+    # Print class C as an explicit class.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class C" "type = class C : public A \{$nl\[ \]*public:$nl\[ \]*int c;$nl\[ \]*int x;$nl.*\}" "ptype class C"
+
+    # Print type of an object of type g_C.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_C" "type = class C : public A \{$nl\[ \]*public:$nl\[ \]*int c;$nl\[ \]*int x;$nl.*\}" "ptype g_C"
+
+    # gcc cygnus-2.3.3 (Q1) has this bug, but it was fixed as of
+    # cygnus-2.3.3-930417.  PR 2819.
+    send_gdb "ptype tagless_struct\n"
+    gdb_expect {
+	-re "type = class \{${ws}public:${ws}int one;${ws}int two;${ws}tagless_struct & operator=\\(tagless_struct &\\);${ws}\\\$_1 \\(tagless_struct &\\);${ws}\\\$_1 \\(\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype tagless struct"
+	}
+	-re "type = (struct|class).*\{.*int one;.*int two;.*\}$nl$gdb_prompt $" {
+	    pass "ptype tagless struct (obsolete gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype tagless struct"
+	}
+	timeout {
+	    fail "ptype tagless struct (timeout)"
+	}
+    }
+
+    send_gdb "ptype v_tagless\n"
+    gdb_expect {
+	-re "type = class \{${ws}public:${ws}int one;${ws}int two;${ws}tagless_struct & operator=\\(tagless_struct &\\);${ws}\\\$_1 \\(tagless_struct &\\);${ws}\\\$_1 \\(\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype variable of type tagless struct"
+	}
+	-re "type = (struct|class).*\{.*int one;.*int two;.*\}$nl$gdb_prompt $" {
+	    pass "ptype variable of type tagless struct (obsolete gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype variable of type tagless struct"
+	}
+	timeout {
+	    fail "ptype variable of type tagless struct (timeout)"
+	}
+    }
+}
+
+#
+# Single inheritance, print complete classes.
+#
+
+proc test_print_si_classes {} {
+    # Print all members of g_A.
+
+    gdb_test "print g_A" ".* = \{a = 1, x = 2\}" "print g_A"
+
+    # Print all members of g_B.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_B" ".* = \{\<A\> = \{a = 3, x = 4\}, b = 5, x = 6\}" "print g_B"
+
+    # Print all members of g_C.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_C" ".* = \{\<A\> = \{a = 7, x = 8\}, c = 9, x = 10\}" "print g_C"
+}
+
+#
+# Single inheritance, print anonymous unions.
+# GDB versions prior to 4.14 entered an infinite loop when printing
+# the type of a class containing an anonymous union, and they were also
+# incapable of printing the member of an anonymous union.
+# We test the printing of the member first, and perform the other tests
+# only if the test succeeds, to avoid the infinite loop.
+#
+
+proc test_print_anon_union {} {
+    global gdb_prompt
+    global ws
+    global nl
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_anon_union.a" ".* = 2" "print anonymous union member"
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_anon_union\n"
+    gdb_expect {
+	-re ".* = \{one = 1,  = \{a = 2, b = 2\}\}$nl$gdb_prompt $" {
+	    pass "print variable of type anonymous union"
+	}
+	-re ".* = .*\{one = 1,  = \{a = 2, b = .*\}\}$nl$gdb_prompt $" {
+	    pass "print variable of type anonymous union (obsolete gcc or gdb)"
+	}
+	-re ".*$nl$gdb_prompt $" {
+	    fail "print variable of type anonymous union"
+	}
+	timeout {
+	    fail "print variableof type anonymous union (timeout)"
+	}
+    }
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype g_anon_union\n"
+    gdb_expect {
+	-re "type = class class_with_anon_union \{${ws}public:${ws}int one;${ws}union \{${ws}public:${ws}int a;${ws}long int b;${ws}union \{\.\.\.\} & operator=\\(union \{\.\.\.\} &\\);${ws}\\\$_0 \\(union \{\.\.\.\} &\\);${ws}\\\$_0 \\(\\);${ws}\};${ws}class_with_anon_union & operator=\\(class_with_anon_union const &\\);${ws}class_with_anon_union\\(class_with_anon_union const &\\);${ws}class_with_anon_union\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "print type of anonymous union"
+	}
+	-re "type = (struct|class).*\{.*int one;.*union \{.*int a;.*(long|long int|int) b;.*\};.*\}$nl$gdb_prompt $" {
+	    pass "print type of anonymous union (obsolete gcc or gdb)"
+	}
+	-re ".*$nl$gdb_prompt $" {
+	    fail "print type of anonymous union"
+	}
+	timeout {
+	    fail "print type of anonymous union (timeout)"
+	}
+    }
+}
+
+#
+# Multiple inheritance, print individual members.
+#
+
+proc test_print_mi_members {} {
+    global gdb_prompt
+    global nl
+
+    # Print all members of g_A.
+
+    gdb_test "print g_A.A::a" ".* = 1" "print g_A.A::a"
+    
+    gdb_test "print g_A.A::x" ".* = 2" "print g_A.A::x"
+
+    # Print all members of g_B.
+
+    gdb_test "print g_B.A::a" ".* = 3" "print g_B.A::a"
+
+    gdb_test "print g_B.A::x" ".* = 4" "print g_B.A::x"
+
+    gdb_test "print g_B.B::b" ".* = 5" "print g_B.B::b"
+
+    gdb_test "print g_B.B::x" ".* = 6" "print g_B.B::x"
+
+    # Print all members of g_C.
+
+    gdb_test "print g_C.A::a" ".* = 7" "print g_C.A::a"
+
+    gdb_test "print g_C.A::x" ".* = 8" "print g_C.A::x"
+
+    gdb_test "print g_C.C::c" ".* = 9" "print g_C.C::c"
+
+    gdb_test "print g_C.C::x" ".* = 10" "print g_C.C::x"
+
+    # Print all members of g_D.
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+    setup_xfail "*-*-*"
+    send_gdb "print g_D.A::a\n"
+    gdb_expect {
+	-re ".* = 11$nl$gdb_prompt $" {
+	    fail "print g_D.A::a (FIXME)"
+	}
+	-re ".* = 15$nl$gdb_prompt $" {
+	    fail "print g_D.A::a (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_D.A::a" }
+	timeout { fail "print g_D.A::a (timeout)" ; return }
+    }
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+    setup_xfail "*-*-*"
+    send_gdb "print g_D.A::x\n"
+    gdb_expect {
+	-re ".* = 12$nl$gdb_prompt $" {
+	    fail "print g_D.A::x (FIXME)"
+	}
+	-re ".* = 16$nl$gdb_prompt $" {
+	    fail "print g_D.A::x (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_D.A::x" }
+	timeout { fail "print g_D.A::x (timeout)" ; return }
+    }
+
+    gdb_test "print g_D.B::b" ".* = 13" "print g_D.B::b"
+
+    gdb_test "print g_D.B::x" ".* = 14" "print g_D.B::x"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D.C::c" ".* = 17" "print g_D.C::c"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D.C::x" ".* = 18" "print g_D.C::x"
+
+    gdb_test "print g_D.D::d" ".* = 19" "print g_D.D::d"
+
+    gdb_test "print g_D.D::x" ".* = 20" "print g_D.D::x"
+
+    # Print all members of g_E.
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+    setup_xfail "*-*-*"
+    send_gdb "print g_E.A::a\n"
+    gdb_expect {
+	-re ".* = 21$nl$gdb_prompt $" {
+	    fail "print g_E.A::a (FIXME)"
+	}
+	-re ".* = 25$nl$gdb_prompt $" {
+	    fail "print g_E.A::a (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_E.A::a" }
+	timeout { fail "print g_E.A::a (timeout)" ; return }
+    }
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+    setup_xfail "*-*-*"
+    send_gdb "print g_E.A::x\n"
+    gdb_expect {
+	-re ".* = 22$nl$gdb_prompt $" {
+	    fail "print g_E.A::x (FIXME)"
+	}
+	-re ".* = 26$nl$gdb_prompt $" {
+	    fail "print g_E.A::x (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_E.A::x" }
+	timeout { fail "print g_E.A::x (timeout)" ; return }
+    }
+
+    gdb_test "print g_E.B::b" ".* = 23" "print g_E.B::b"
+
+    gdb_test "print g_E.B::x" ".* = 24" "print g_E.B::x"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E.C::c" ".* = 27" "print g_E.C::c"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E.C::x" ".* = 28" "print g_E.C::x"
+
+    gdb_test "print g_E.D::d" ".* = 29" "print g_E.D::d"
+
+    gdb_test "print g_E.D::x" ".* = 30" "print g_E.D::x"
+
+    gdb_test "print g_E.E::e" ".* = 31" "print g_E.E::e"
+
+    gdb_test "print g_E.E::x" ".* = 32" "print g_E.E::x"
+}
+
+#
+# Multiple inheritance, print type definitions.
+#
+
+proc test_ptype_mi {} {
+    global nl
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype D" "type = class D : public B, public C \{$nl\[ \]*public:$nl\[ \]*int d;$nl\[ \]*int x;$nl.*\}" "ptype D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class D" "type = class D : public B, public C \{$nl\[ \]*public:$nl\[ \]*int d;$nl\[ \]*int x;$nl.*\}" "ptype class D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_D" "type = class D : public B, public C \{$nl\[ \]*public:$nl\[ \]*int d;$nl\[ \]*int x;$nl.*\}" "ptype g_D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype E" "type = class E : public D \{$nl\[ \]*public:$nl\[ \]*int e;$nl\[ \]*int x;$nl.*\}" "ptype E"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class E" "type = class E : public D \{$nl\[ \]*public:$nl\[ \]*int e;$nl\[ \]*int x;$nl.*\}" "ptype class E"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_E" "type = class E : public D \{$nl\[ \]*public:$nl\[ \]*int e;$nl\[ \]*int x;$nl.*\}" "ptype g_E"
+}
+
+#
+# Multiple inheritance, print complete classes.
+#
+
+proc test_print_mi_classes {} {
+    # Print all members of g_D.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D" ".* = \{\<B\> = \{\<A\> = \{a = 11, x = 12\}, b = 13, x = 14\}, \<C\> = \{\<A\> = \{a = 15, x = 16\}, c = 17, x = 18\}, d = 19, x = 20\}" "print g_D"
+
+    # Print all members of g_E.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E" ".* = \{\<D\> = \{\<B\> = \{\<A\> = \{a = 21, x = 22\}, b = 23, x = 24\}, \<C\> = \{\<A\> = \{a = 25, x = 26\}, c = 27, x = 28\}, d = 29, x = 30\}, e = 31, x = 32\}" "print g_E"
+}
+
+#
+# Single virtual inheritance, print individual members.
+#
+
+proc test_print_svi_members {} {
+    global gdb_prompt
+    global decimal
+    global nl
+
+    # Print all members of g_vA.
+
+    gdb_test "print g_vA.vA::va" ".* = 1" "print g_vA.vA::va"
+
+    gdb_test "print g_vA.vA::vx" ".* = 2" "print g_vA.vA::vx"
+
+    # Print members of g_vA using compact form.
+
+    gdb_test "print g_vA.va" ".* = 1" "print g_vA.va"
+
+    gdb_test "print g_vA.vx" ".* = 2" "print g_vA.vx"
+
+    # Print all members of g_vB.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vB.vA::va\n"
+    gdb_expect {
+	-re ".* = 3$nl$gdb_prompt $" { pass "print g_vB.vA::va" }
+	-re ".*virtual baseclass botch.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vB.vA::va (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vB.vA::va" }
+	timeout { fail "print g_vB.vA::va (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vB.vA::vx" ".* = 4" "print g_vB.vA::vx"
+
+    gdb_test "print g_vB.vB::vb" ".* = 5" "print g_vB.vB::vb"
+
+    gdb_test "print g_vB.vB::vx" ".* = 6" "print g_vB.vB::vx"
+
+    # Print members of g_vB using compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vB.va" ".* = 3" "print g_vB.va"
+
+    gdb_test "print g_vB.vb" ".* = 5" "print g_vB.vb"
+
+    gdb_test "print g_vB.vx" ".* = 6" "print g_vB.vx"
+
+    # Print all members of g_vC.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.vA::va" ".* = 7" "print g_vC.vA::va"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.vA::vx" ".* = 8" "print g_vC.vA::vx"
+
+    gdb_test "print g_vC.vC::vc" ".* = 9" "print g_vC.vC::vc"
+
+    gdb_test "print g_vC.vC::vx" ".* = 10" "print g_vC.vC::vx"
+
+    # Print members of g_vC using compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.va" ".* = 7" "print g_vC.va"
+
+    gdb_test "print g_vC.vc" ".* = 9" "print g_vC.vc"
+
+    gdb_test "print g_vC.vx" ".* = 10" "print g_vC.vx"
+}
+
+#
+# Single virtual inheritance, print type definitions.
+#
+
+proc test_ptype_vi {} {
+    global gdb_prompt
+    global nl
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype vA\n"
+    gdb_expect {
+	-re "type = class vA \{$nl\[ \]*public:$nl\[ \]*int va;$nl\[ \]*int vx;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype vA"
+	}
+	-re "type = struct vA \{$nl\[ \]*int va;$nl\[ \]*int vx;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype vA" }
+	timeout { fail "ptype vA (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype class vA\n"
+    gdb_expect {
+	-re "type = class vA \{$nl\[ \]*public:$nl\[ \]*int va;$nl\[ \]*int vx;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re "type = struct vA \{$nl\[ \]*int va;$nl\[ \]*int vx;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class vA" }
+	timeout { fail "ptype class vA (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype g_vA\n"
+    gdb_expect {
+	-re "type = class vA \{$nl\[ \]*public:$nl\[ \]*int va;$nl\[ \]*int vx;$nl.*\}$nl$gdb_prompt $" {
+	    pass "ptype g_vA"
+	}
+	-re "type = struct vA \{$nl\[ \]*int va;$nl\[ \]*int vx;$nl\}$nl$gdb_prompt $" {
+	    pass "ptype g_vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype g_vA" }
+	timeout { fail "ptype g_vA (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vB" "ptype vB\[\r\n\]+type = class vB : public virtual vA \{$nl  private:$nl\[ \]+vA \[*\]+_vb\[\\\$\.\]+vA;$nl  public:$nl\[ \]+int vb;$nl\[ \]+int vx;$nl.*\}" "ptype vB"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vB" "type = class vB : public virtual vA \{$nl\[ \]*private:$nl\[ \]*vA \[*\]+_vb\[\\\$\.\]vA;$nl\[ \]*public:$nl\[ \]*int vb;$nl\[ \]*int vx;$nl.*\}" "ptype class vB"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vB" "type = class vB : public virtual vA \{$nl\[ \]*private:$nl\[ \]*vA \[*\]+_vb\[\\\$\.\]vA;$nl\[ \]*public:$nl\[ \]*int vb;$nl\[ \]*int vx;$nl.*\}" "ptype g_vB"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vC" "type = class vC : public virtual vA \{$nl\[ \]*private:$nl\[ \]*vA \[*\]+_vb\[\\\$\.\]vA;$nl\[ \]*public:$nl\[ \]*int vc;$nl\[ \]*int vx;$nl.*\}" "ptype vC"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vC" "type = class vC : public virtual vA \{$nl\[ \]*private:$nl\[ \]*vA \[*\]+_vb\[\\\$\.\]vA;$nl\[ \]*public:$nl\[ \]*int vc;$nl\[ \]*int vx;$nl.*\}" "ptype class vC"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vC" "type = class vC : public virtual vA \{$nl\[ \]*private:$nl\[ \]*vA \[*\]+_vb\[\\\$\.\]vA;$nl\[ \]*public:$nl\[ \]*int vc;$nl\[ \]*int vx;$nl.*\}" "ptype g_vC"
+}
+
+#
+# Single virtual inheritance, print complete classes.
+#
+
+proc test_print_svi_classes {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global nl
+
+    # Print all members of g_vA.
+
+    gdb_test "print g_vA" ".* = \{va = 1, vx = 2\}" "print g_vA"
+
+    # Print all members of g_vB.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vB\n"
+    gdb_expect {
+	-re ".* = \{\<vA\> = \{va = 3, vx = 4\}, _vb\[\\\$\.\]vA = $hex, vb = 5, vx = 6\}$nl$gdb_prompt $" {
+	    pass "print g_vB"
+	}
+	-re ".*invalid address 0x0.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vB (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vB" }
+	timeout { fail "print g_vB (timeout)" ; return }
+    }
+
+    # Print all members of g_vC.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC" ".* = \{\<vA\> = \{va = 7, vx = 8\}, _vb\[\\\$\.\]vA = $hex, vc = 9, vx = 10\}" "print g_vC"
+}
+
+#
+# Multiple virtual inheritance, print individual members.
+#
+
+proc test_print_mvi_members {} {
+    global gdb_prompt
+    global decimal
+    global nl
+
+    # Print all members of g_vD.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vD.vA::va\n"
+    gdb_expect {
+	-re ".* = 19$nl$gdb_prompt $" { pass "print g_vD.vA::va" }
+	-re ".*virtual baseclass botch.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vD.vA::va (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vD.vA::va" }
+	timeout { fail "print g_vD.vA::va (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vA::vx" ".* = 20" "print g_vD.vA::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vB::vb" ".* = 21" "print g_vD.vB::vb"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vB::vx" ".* = 22" "print g_vD.vB::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vC::vc" ".* = 23" "print g_vD.vC::vc"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vC::vx" ".* = 24" "print g_vD.vC::vx"
+
+    gdb_test "print g_vD.vD::vd" ".* = 25" "print g_vD.vD::vd"
+
+    gdb_test "print g_vD.vD::vx" ".* = 26" "print g_vD.vD::vx"
+
+    # Print all members of g_vE.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vA::va" ".* = 0" "print g_vE.vA::va"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vA::vx" ".* = 0" "print g_vE.vA::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vB::vb" ".* = 0" "print g_vE.vB::vb"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vB::vx" ".* = 0" "print g_vE.vB::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vC::vc" ".* = 0" "print g_vE.vC::vc"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vC::vx" ".* = 0" "print g_vE.vC::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vD::vd" ".* = 0" "print g_vE.vD::vd"
+
+    gdb_test "print g_vE.vD::vx" ".* = 0" "print g_vE.vD::vx"
+
+    gdb_test "print g_vE.vE::ve" ".* = 27" "print g_vE.vE::ve"
+
+    gdb_test "print g_vE.vE::vx" ".* = 28" "print g_vE.vE::vx"
+}
+
+#
+# Multiple virtual inheritance, print type definitions.
+#
+
+proc test_ptype_mvi {} {
+    global nl
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vD" "type = class vD : public virtual vB, public virtual vC \{$nl\[ \]*private:$nl\[ \]*vC \[*\]+_vb\[\\\$\.\]vC;$nl\[ \]*vB \[*\]+_vb\[\\\$\.\]vB;$nl\[ \]*public:$nl\[ \]*int vd;$nl\[ \]*int vx;$nl.*\}" "ptype vD"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vD" "type = class vD : public virtual vB, public virtual vC \{$nl\[ \]*private:$nl\[ \]*vC \[*\]+_vb\[\\\$\.\]vC;$nl\[ \]*vB \[*\]+_vb\[\\\$\.\]vB;$nl\[ \]*public:$nl\[ \]*int vd;$nl\[ \]*int vx;$nl.*\}" "ptype class vD"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vD" "type = class vD : public virtual vB, public virtual vC \{$nl\[ \]*private:$nl\[ \]*vC \[*\]+_vb\[\\\$\.\]vC;$nl\[ \]*vB \[*\]+_vb\[\\\$\.\]vB;$nl\[ \]*public:$nl\[ \]*int vd;$nl\[ \]*int vx;$nl.*\}" "ptype g_vD"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vE" "type = class vE : public virtual vD \{$nl\[ \]*private:$nl\[ \]*vD \[*\]+_vb\[\\\$\.\]vD;$nl\[ \]*public:$nl\[ \]*int ve;$nl\[ \]*int vx;$nl.*\}" "ptype vE"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vE" "type = class vE : public virtual vD \{$nl\[ \]*private:$nl\[ \]*vD \[*\]+_vb\[\\\$\.\]vD;$nl\[ \]*public:$nl\[ \]*int ve;$nl\[ \]*int vx;$nl.*\}" "ptype class vE"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vE" "type = class vE : public virtual vD \{$nl\[ \]*private:$nl\[ \]*vD \[*\]+_vb\[\\\$\.\]vD;$nl\[ \]*public:$nl\[ \]*int ve;$nl\[ \]*int vx;$nl.*\}" "ptype g_vE"
+}
+
+#
+# Multiple virtual inheritance, print complete classes.
+#
+
+proc test_print_mvi_classes {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global nl
+
+    # Print all members of g_vD.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vD\n"
+    gdb_expect {
+	-re ".* = \{\<vB\> = \{\<vA\> = \{va = 19, vx = 20\}, _vb\[\\\$\.\]vA = $hex, vb = 21, vx = 22\}, \<vC\> = \{_vb\[\\\$\.\]vA = $hex, vc = 23, vx = 24\}, _vb\[\\\$\.\]vC = $hex, _vb\[\\\$\.\]vB = $hex, vd = 25, vx = 26\}$nl$gdb_prompt $" {
+	    pass "print g_vD"
+	}
+	-re ".*invalid address 0x0.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vD (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vD" }
+	timeout { fail "print g_vD (timeout)" ; return }
+    }
+
+    # Print all members of g_vE.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE" ".* = \{\<vD\> = \{\<vB\> = \{\<vA\> = \{va = 0, vx = 0\}, _vb\[\\\$\.\]vA = $hex, vb = 0, vx = 0\}, \<vC\> = \{_vb\[\\\$\.\]vA = $hex, vc = 0, vx = 0\}, _vb\[\\\$\.\]vC = $hex, _vb\[\\\$\.\]vB = $hex, vd = 0, vx = 0\}, _vb\[\\\$\.\]vD = $hex, ve = 27, vx = 28\}" "print g_vE"
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language c++" ""
+    gdb_test "set width 0" ""
+
+    # Get the debug format for the compiled test case.
+
+    if { ![ runto_main] } {
+	gdb_suppress_tests;
+    } else {
+	get_debug_format
+    }
+
+    test_ptype_si
+    test_ptype_mi
+    test_ptype_vi
+    test_ptype_mvi
+
+    gdb_stop_suppressing_tests;
+    
+    if { ![ runto 'inheritance2(void)' ] } {
+	gdb_suppress_tests;
+    }
+
+    test_print_si_members
+    test_print_si_classes
+    test_print_mi_members
+    test_print_mi_classes
+    test_print_anon_union
+
+    gdb_stop_suppressing_tests;
+
+    if { ![ runto 'inheritance4(void)' ] } {
+	gdb_suppress_tests;
+    }
+
+    test_print_svi_members
+    test_print_svi_classes
+    test_print_mvi_members
+    test_print_mvi_classes
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.c++/local.cc b/gdb/testsuite/gdb.c++/local.cc
new file mode 100644
index 0000000..c811deb
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/local.cc
@@ -0,0 +1,67 @@
+// Tests for local types
+
+void marker1 (void)
+{ 
+}
+
+  
+int foobar (int x)
+{
+  class Local {
+  public:
+    int loc1;
+    char loc_foo (char c)
+    {
+      return c + 3;
+    }
+  };
+
+  Local l;
+  static Local l1;
+  char  c;
+
+  l.loc1 = 23;
+
+  c = l.loc_foo('x');
+  return c + 2;
+}
+
+int main()
+{
+  int c;
+  
+  c = foobar (31);
+  
+ { // inner block
+   class InnerLocal {
+   public:
+     char ilc;
+     int * ip;
+     int il_foo (unsigned const char & uccr)
+     {
+       return uccr + 333;
+     }
+     class NestedInnerLocal {
+     public:
+       int nil;
+       int nil_foo (int i)
+       {
+         return i * 27;
+       }
+     };
+     NestedInnerLocal nest1;
+   };
+
+   InnerLocal il;
+
+   il.ilc = 'b';
+   il.ip = &c;
+ }
+ marker1();
+}
+
+  
+
+  
+  
+    
diff --git a/gdb/testsuite/gdb.c++/local.exp b/gdb/testsuite/gdb.c++/local.exp
new file mode 100644
index 0000000..0aa8468
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/local.exp
@@ -0,0 +1,110 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# tests for local variables
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-08
+
+
+# This file is part of the gdb testsuite
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "local"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+send_gdb "ptype Local\n"
+gdb_expect {
+    -re "type = class Local \{\r\n\[\t \]*public:\r\n\[\t \]*int loc1;\r\n\r\n\[\t \]*.char loc_foo\\(char\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:10\\).*$gdb_prompt $" { pass "ptype Local" }
+    -re "type = class Local \{\r\n\[\t \]*public:\r\n\[\t \]*int loc1;\r\n\r\n\[\t \]*.char loc_foo\\(char\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:\[0-9\]*\\).*$gdb_prompt $" { pass "ptype Local (incorrect line number?)" }
+    -re ".*$gdb_prompt $"   {  fail "ptype Local" }
+    timeout             { fail "(timeout) ptype Local" }
+}
+
+send_gdb "ptype InnerLocal\n"
+gdb_expect {
+    -re "type = class InnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*char ilc;\r\n\[\t \]*int \\*ip;\r\n\[\t \]*InnerLocal::NestedInnerLocal nest1;\r\n\r\n\[\t \]*.int il_foo\\(const unsigned char &\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:36\\).*$gdb_prompt $" { pass "ptype InnerLocal" }
+    -re "type = class InnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*char ilc;\r\n\[\t \]*int \\*ip;\r\n\[\t \]*class InnerLocal::NestedInnerLocal nest1;\r\n\r\n\[\t \]*.int il_foo\\(const unsigned char &\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:36\\).*$gdb_prompt $" { pass "ptype InnerLocal" }
+    -re "type = class InnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*char ilc;\r\n\[\t \]*int \\*ip;\r\n\[\t \]*InnerLocal::NestedInnerLocal nest1;\r\n\r\n\[\t \]*.int il_foo\\(const unsigned char &\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:\[0-9\]*\\).*$gdb_prompt $" { pass "ptype InnerLocal (incorrect line number?" }
+    -re "type = class InnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*char ilc;\r\n\[\t \]*int \\*ip;\r\n\[\t \]*class InnerLocal::NestedInnerLocal nest1;\r\n\r\n\[\t \]*.int il_foo\\(const unsigned char &\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:\[0-9\]*\\).*$gdb_prompt $" { pass "ptype InnerLocal (incorrect line number?" }
+    -re ".*$gdb_prompt $"   {  fail "ptype InnerLocal" }
+    timeout             { fail "(timeout) ptype InnerLocal" }
+}
+
+
+send_gdb "ptype NestedInnerLocal\n"
+gdb_expect {
+    -re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:44\\).*$gdb_prompt $" { pass "ptype NestedInnerLocal" }
+    -re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:\[0-9\]*\\).*$gdb_prompt $" { pass "ptype NestedInnerLocal (incorrect line number?)" }
+    -re "No symbol.*in current context.*$gdb_prompt $" { pass "ptype NestedInnerLocal (known aCC limitation)" }
+    -re ".*$gdb_prompt $"   {  fail "ptype NestedInnerLocal" }
+    timeout             { fail "(timeout) ptype NestedInnerLocal" }
+}     
+
+send_gdb "ptype InnerLocal::NestedInnerLocal\n"
+gdb_expect {
+    -re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:44\\).*$gdb_prompt $" { pass "ptype InnerLocal::NestedInnerLocal" }
+    -re "type = class InnerLocal::NestedInnerLocal \{\r\n\[\t \]*public:\r\n\[\t \]*int nil;\r\n\r\n\[\t \]*.int nil_foo\\(int\\);\r\n\[\t \]*\}\[\t \]*\\(Local at.*local\\.C:\[0-9\]*\\).*$gdb_prompt $" { pass "ptype InnerLocal::NestedInnerLocal (incorrect line number?)" }
+    -re ".*$gdb_prompt $"   {  fail "ptype InnerLocal::NestedInnerLocal" }
+    timeout             { fail "(timeout) ptype InnerLocal::NestedInnerLocal" }
+}
+
+
diff --git a/gdb/testsuite/gdb.c++/member-ptr.cc b/gdb/testsuite/gdb.c++/member-ptr.cc
new file mode 100644
index 0000000..4beb926
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/member-ptr.cc
@@ -0,0 +1,106 @@
+extern "C" {
+#include <stdio.h>
+}
+
+
+class A {
+public:
+  A();
+  int foo (int x);
+  int bar (int y);
+  virtual int baz (int z);
+  char c;
+  int  j;
+  int  jj;
+  static int s;
+};
+
+class B {
+public:
+  static int s;
+};
+
+int A::s = 10;
+int B::s = 20;
+
+A::A()
+{
+  c = 'x';
+  j = 5;
+}
+
+int A::foo (int dummy)
+{
+  j += 3;
+  return j + dummy;
+}
+
+int A::bar (int dummy)
+{
+  int r;
+  j += 13;
+  r = this->foo(15);
+  return r + j + 2 * dummy;
+}
+
+int A::baz (int dummy)
+{
+  int r;
+  j += 15;
+  r = this->foo(15);
+  return r + j + 12 * dummy;
+}
+
+int fum (int dummy)
+{
+  return 2 + 13 * dummy;
+}
+
+typedef int (A::*PMF)(int);
+
+typedef int A::*PMI;
+
+int main ()
+{
+  A a;
+  A * a_p;
+  PMF pmf;
+
+  PMF * pmf_p;
+  PMI pmi;
+
+  a.j = 121;
+  a.jj = 1331;
+  
+  int k;
+
+  a_p = &a;
+
+  pmi = &A::j;
+  pmf = &A::bar;
+  pmf_p = &pmf;
+
+  pmi = NULL;
+  
+  k = (a.*pmf)(3);
+
+  pmi = &A::jj;
+  pmf = &A::foo;
+  pmf_p = &pmf;
+
+  k = (a.*pmf)(4);
+
+  k = (a.**pmf_p)(5);
+
+  k = a.*pmi;
+  
+
+  k = a.bar(2);
+
+  k += fum (4);
+
+  B b;
+
+  k += b.s;
+  
+}
diff --git a/gdb/testsuite/gdb.c++/member-ptr.exp b/gdb/testsuite/gdb.c++/member-ptr.exp
new file mode 100644
index 0000000..7b4dd7c
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/member-ptr.exp
@@ -0,0 +1,510 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+# Tests for pointer-to-member support
+# Written by Satish Pai <pai@apollo.hp.com> 1997-08-19
+
+# This file is part of the gdb testsuite
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+
+# Start with a fresh gdb
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set prms_id 0
+set bug_id 0
+
+set testfile "member-ptr"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break 83\n"
+gdb_expect {
+   -re "Breakpoint \[0-9\]*.*line 83\\.\r\n$gdb_prompt $" {
+      pass "set break at 83"
+    }
+    -re ".*$gdb_prompt $" { fail "set break at 83" }
+    timeout { fail "(timeout) set break at 83" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\n\r\nBreakpoint.*at.*member-ptr\\.cc:83\r\n83\[ \t]*pmi = NULL;\r\n$gdb_prompt $" {
+      pass "continue to 83"
+    }
+    -re ".*$gdb_prompt $" { fail "continue to 83" }
+    timeout { fail "(timeout) continue to 83" }
+}
+
+# ptype on pointer to data member
+
+send_gdb "ptype pmi\n"
+gdb_expect {
+   -re "type = int \\( A::\\*\\)\r\n$gdb_prompt $" {
+      pass "ptype pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "ptype pmi" }
+    timeout { fail "(timeout) ptype pmi" }
+}
+
+# print pointer to data member
+
+send_gdb "print pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(int \\( A::\\*\\)\\) &A::j\r\n$gdb_prompt $" {
+      pass "print pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "print pmi" }
+    timeout { fail "(timeout) print pmi" }
+}
+
+
+# print dereferenced pointer to data member
+
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 121\r\n$gdb_prompt $" {
+      pass "print a.*pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmi" }
+    timeout { fail "(timeout) print a.*pmi" }
+}
+
+# print dereferenced pointer to data member
+# this time, dereferenced through a pointer
+
+send_gdb "print a_p->*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 121\r\n$gdb_prompt $" {
+      pass "print a->*pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "print a->*pmi" }
+    timeout { fail "(timeout) print a->*pmi" }
+}
+
+
+# set the pointer to data member
+
+send_gdb "set var pmi = &A::jj\n"
+gdb_expect {
+   -re "$gdb_prompt $" {
+      pass "set var (not really a pass)"
+    }
+    timeout { fail "(timeout) " }
+}
+
+# Now print the pointer again
+
+send_gdb "print pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(int \\( A::\\*\\)\\) &A::jj\r\n$gdb_prompt $" {
+      pass "print pmi after setting"
+    }
+    -re ".*$gdb_prompt $" { fail "print pmi after setting" }
+    timeout { fail "(timeout) print pmi after setting" }
+}
+
+# print dereferenced pointer to data member again
+
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 1331\r\n$gdb_prompt $" {
+      pass "print a.*pmi after setting"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmi after setting" }
+    timeout { fail "(timeout) print a.*pmi after setting" }
+}
+
+# set the pointer to data member back to A::j
+
+send_gdb "set var pmi = &A::j\n"
+gdb_expect {
+   -re "$gdb_prompt $" {
+      pass "set var back to A::j (not really a pass)"
+    }
+    timeout { fail "(timeout) set var pmi" }
+}
+
+# print dereferenced pointer to data member yet again (extra check, why not)
+
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 121\r\n$gdb_prompt $" {
+      pass "print a.*pmi after resetting"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmi after resetting" }
+    timeout { fail "(timeout) print a.*pmi after resetting" }
+}
+
+# Set the data member pointed to.
+
+send_gdb "print a.*pmi = 33\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 33\r\n$gdb_prompt $" {
+      pass "print command to set"
+    }
+    -re ".*$gdb_prompt $" { fail "print command to set" }
+    timeout { fail "(timeout) print command to set" }
+}
+
+# Now check that the data really was changed
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 33\r\n$gdb_prompt $" {
+      pass "print a.*pmi after setting member pointed to"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmi after setting member pointed to" }
+    timeout { fail "(timeout) print a.*pmi after setting member pointed to" }
+}
+
+# Double-check by printing a.
+send_gdb "print a\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{c = 120 'x', j = 33, jj = 1331, static s = 10, Virtual table at $hex\}\r\n$gdb_prompt $" {
+      pass "print a after setting member pointed to by pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "print a after setting member pointed to by pmi" }
+    timeout { fail "(timeout) print a after setting member pointed to by pmi" }
+}
+
+
+# Set the data member pointed to, using ->*
+
+send_gdb "print a_p->*pmi = 44\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 44\r\n$gdb_prompt $" {
+      pass "print command to set (->)"
+    }
+    -re ".*$gdb_prompt $" { fail "print command to set (->)" }
+    timeout { fail "(timeout) print command to set (->)" }
+}
+
+# Now check that the data really was changed
+send_gdb "print a_p->*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 44\r\n$gdb_prompt $" {
+      pass "print a_p->*pmi after setting member pointed to"
+    }
+    -re ".*$gdb_prompt $" { fail "print a_p->*pmi after setting member pointed to" }
+    timeout { fail "(timeout) print a_p->*pmi after setting member pointed to" }
+}
+
+# Double-check by printing a.
+send_gdb "print a\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{c = 120 'x', j = 44, jj = 1331, static s = 10, Virtual table at $hex\}\r\n$gdb_prompt $" {
+      pass "print a after setting member pointed to by pmi (->) "
+    }
+    -re ".*$gdb_prompt $" { fail "print a after setting member pointed to by pmi (->) " }
+    timeout { fail "(timeout) print a after setting member pointed to by pmi (->) " }
+}
+
+
+# Do a ptype on the dereferenced pointer to member
+# pai/1997-08-20 Doesn't work
+
+# send_gdb "ptype a.*pmi\n"
+# gdb_expect {
+#   -re "type = int\r\n$gdb_prompt $" {
+#      pass "ptype a.*pmi"
+#    }
+#    -re ".*$gdb_prompt $" { fail "ptype a.*pmi" }
+#    timeout { fail "(timeout) ptype a.*pmi" }
+#}
+
+# Try to dereference the pointer to data member without any object
+
+send_gdb "print *pmi\n"
+gdb_expect {
+   -re "Attempt to dereference pointer to member without an object\r\n$gdb_prompt $" {
+      pass "attempt to print ptr to member without object"
+    }
+    -re ".*$gdb_prompt $" { fail "attempt to print ptr to member without object" }
+    timeout { fail "(timeout) attempt to print ptr to member without object" }
+}
+
+# Try to ptype a dereference of the pointer to data member without any object
+
+send_gdb "ptype *pmi\n"
+gdb_expect {
+   -re "Attempt to dereference pointer to member without an object\r\n$gdb_prompt $" {
+      pass "attempt to ptype ptr to member without object"
+    }
+    -re ".*$gdb_prompt $" { fail "attempt to ptype ptr to member without object" }
+    timeout { fail "(timeout) attempt to ptype ptr to member without object" }
+}
+
+# Ptype a pointer to a method.
+
+send_gdb "ptype pmf\n"
+gdb_expect {
+   -re "type = int \\( A::\\*\\)\\(\\.\\.\\.\\)\r\n$gdb_prompt $" {
+      pass "ptype pmf"
+    }
+    -re ".*$gdb_prompt $" { fail "ptype pmf" }
+    timeout { fail "(timeout) ptype pmf" }
+}
+
+# print a pointer to a method
+
+send_gdb "print pmf\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(int \\( A::\\*\\)\\(\\.\\.\\.\\)\\) \\?\\? <not supported with HP aCC>\r\n$gdb_prompt $" {
+      pass "print pmf"
+    }
+    -re ".*$gdb_prompt $" { fail "print pmf" }
+    timeout { fail "(timeout) print pmf" }
+}
+
+
+# Ptype a pointer to a pointer to a method
+
+send_gdb "ptype pmf_p\n"
+gdb_expect {
+   -re "type = int \\( A::\\*\\*\\)\\(\\.\\.\\.\\)\r\n$gdb_prompt $" {
+      pass "ptype pmf_p"
+    }
+    -re ".*$gdb_prompt $" { fail "ptype pmf_p" }
+    timeout { fail "(timeout) ptype pmf_p" }
+}
+
+# print a pointer to a pointer to a method
+
+send_gdb "print pmf_p\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(int \\( A::\\*\\*\\)\\(\\.\\.\\.\\)\\) $hex\r\n$gdb_prompt $" {
+      pass "print pmf_p"
+    }
+    -re ".*$gdb_prompt $" { fail "print pmf_p" }
+    timeout { fail "(timeout) print pmf_p" }
+}
+
+# print dereferenced pointer to method
+
+send_gdb "print a.*pmf\n"
+gdb_expect {
+   -re "Pointers to methods not supported with HP aCC\r\n$gdb_prompt $" {
+      pass "print a.*pmf (known aCC limitation)"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmf -- ??" }
+    timeout { fail "(timeout) print a.*pmf" }
+}
+
+# print dereferenced pointer to method, using ->*
+
+send_gdb "print a_p->*pmf\n"
+gdb_expect {
+   -re "Pointers to methods not supported with HP aCC\r\n$gdb_prompt $" {
+      pass "print a_p->*pmf (known aCC limitation)"
+    }
+    -re ".*$gdb_prompt $" { fail "print a_p->*pmf -- ??" }
+    timeout { fail "(timeout) print a_p->*pmf" }
+}
+
+# set the pointer to data member
+
+send_gdb "set var pmf = &A::foo\n"
+gdb_expect {
+   -re "Assignment to pointers to methods not implemented with HP aCC\r\n$gdb_prompt $" {
+      pass "set var pmf (known aCC limitation)"
+    }
+    -re ".*$gdb_prompt $" { fail "set var pmf -- ??" }
+    timeout { fail "(timeout) set var pmf" }
+}
+
+# Try to dereference the pointer to method without any object
+
+send_gdb "print *pmf\n"
+gdb_expect {
+   -re "Attempt to dereference pointer to member without an object\r\n$gdb_prompt $" {
+      pass "attempt to print  ptr to method without object"
+    }
+    -re ".*$gdb_prompt $" { fail "attempt to print ptr to method without object" }
+    timeout { fail "(timeout) attempt to print ptr to method without object" }
+}
+
+# Try to ptype a dereference of the pointer to method without any object
+
+send_gdb "ptype *pmi\n"
+gdb_expect {
+   -re "Attempt to dereference pointer to member without an object\r\n$gdb_prompt $" {
+      pass "attempt to ptype ptr to member without object"
+    }
+    -re ".*$gdb_prompt $" { fail "attempt to ptype ptr to member without object" }
+    timeout { fail "(timeout) attempt to ptype ptr to member without object" }
+}
+
+# Check cast of pointer to member to integer
+send_gdb "print (int) pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 8\r\n$gdb_prompt $" {
+      pass "casting pmi to int"
+    }
+    -re ".*$gdb_prompt $" { fail "casting pmi to int" }
+    timeout { fail "(timeout) casting pmi to int" }
+}
+
+# Check cast of pointer to method to integer
+send_gdb "print (int) pmf\n"
+gdb_expect {
+   -re "Pointers to methods not supported with HP aCC\r\n$gdb_prompt $" {
+      pass "casting pmf to int (known aCC limitation)"
+    }
+    -re ".*$gdb_prompt $" { fail "casting pmf to int -- ??" }
+    timeout { fail "(timeout) casting pmf to int" }
+}
+
+# Try to invoke a function through a pointer to data member
+send_gdb "print (a.*pmi)(3)\n"
+gdb_expect {
+   -re "Not implemented: function invocation through pointer to method with HP aCC\r\n$gdb_prompt $" {
+      pass "print (a.*pmi)(3) -- error message should be different"
+    }
+    -re ".*$gdb_prompt $" { fail "print (a.*pmi)(3) -- ???" }
+    timeout { fail "(timeout) print (a.*pmi)(3)" }
+}
+
+# Try to invoke a function through a pointer to a method
+send_gdb "print (a.*pmf)(3)\n"
+gdb_expect {
+   -re "Not implemented: function invocation through pointer to method with HP aCC\r\n$gdb_prompt $" {
+      pass "print (a.*pmi)(3) -- known aCC limitation"
+    }
+    -re ".*$gdb_prompt $" { fail "print (a.*pmf)(3) -- ???" }
+    timeout { fail "(timeout) print (a.*pmf)(3)" }
+}
+
+
+# Go past assignment of NULL to pmi
+send_gdb "next\n"
+gdb_expect {
+   -re "\r\n85\[ \t\]*k = \\(a.\\*pmf\\)\\(3\\);\r\n$gdb_prompt $" {
+      pass "next past 83"
+    }
+    -re ".*$gdb_prompt $" { fail "next past 83" }
+    timeout { fail "(timeout) next past 83" }
+}
+
+#send_gdb "print pmi\n"
+#gdb_expect {
+#   -re "Attempted dereference of null pointer-to-member\r\n$gdb_prompt $" {
+#      pass ""
+#    }
+#    -re ".*$gdb_prompt $" { fail "" }
+#    timeout { fail "(timeout) " }
+#}
+
+# Dereference the null pointer to member
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "Attempted dereference of null pointer-to-member\r\n$gdb_prompt $" {
+      pass "print a.*NULL"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*NULL" }
+    timeout { fail "(timeout) print a.*NULL" }
+}
+
+
+# Go to another part of the program
+send_gdb "break 91\n"
+gdb_expect {
+   -re "Breakpoint \[0-9\]*.*line 91\\.\r\n$gdb_prompt $" {
+      pass "set break at 91"
+    }
+    -re ".*$gdb_prompt $" { fail "set break at 91" }
+    timeout { fail "(timeout) set break at 91" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\n\r\nBreakpoint.*at.*member-ptr\\.cc:91\r\n91\[ \t]*k = \\(a.\\*pmf\\)\\(4\\);\r\n$gdb_prompt $" {
+      pass "continue to 91"
+    }
+    -re ".*$gdb_prompt $" { fail "continue to 91" }
+    timeout { fail "(timeout) continue to 91" }
+}
+
+
+# Now check again that pmi works even when not set to
+# something that's at the beginning of the object
+
+send_gdb "print pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(int \\( A::\\*\\)\\) &A::jj\r\n$gdb_prompt $" {
+      pass "print pmi (2)"
+    }
+    -re ".*$gdb_prompt $" { fail "print pmi (2)" }
+    timeout { fail "(timeout) print pmi (2)" }
+}
+
+
+# print dereferenced pointer to data member
+
+send_gdb "print a.*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 1331\r\n$gdb_prompt $" {
+      pass "print a.*pmi (2)"
+    }
+    -re ".*$gdb_prompt $" { fail "print a.*pmi (2)" }
+    timeout { fail "(timeout) print a.*pmi (2)" }
+}
+
+# print dereferenced pointer to data member
+# this time, dereferenced through a pointer
+
+send_gdb "print a_p->*pmi\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 1331\r\n$gdb_prompt $" {
+      pass "print a->*pmi"
+    }
+    -re ".*$gdb_prompt $" { fail "print a->*pmi (2)" }
+    timeout { fail "(timeout) print a->*pmi (2)" }
+}
+
+
+# p a.*pmf - fail
+
+# p pmi
+
+# p a.*pmi
+
diff --git a/gdb/testsuite/gdb.c++/method.cc b/gdb/testsuite/gdb.c++/method.cc
new file mode 100644
index 0000000..949b027
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/method.cc
@@ -0,0 +1,80 @@
+// Class funk has a constructor and an ordinary method
+// Test for CHFts23426
+
+class funk
+{
+public:
+  funk();
+  void getFunky(int a, int b);
+  int data_;
+};
+
+funk::funk()
+  : data_(33)
+{
+}
+
+void funk::getFunky(int a, int b)
+{
+  int res;
+  res = a + b - data_;
+  data_ = res;
+}
+
+// Class A has const and volatile methods
+
+class A {
+public:
+  int x;
+  int y;
+  int foo (int arg);
+  int bar (int arg) const;
+  int baz (int arg, char c) volatile;
+  int qux (int arg, float f) const volatile;
+};
+
+int A::foo (int arg)
+{
+  x += arg;
+  return arg *2;
+}
+
+int A::bar (int arg) const
+{
+  return arg + 2 * x;
+}
+
+int A::baz (int arg, char c) volatile
+{
+  return arg - 2 * x + c;
+}
+
+int A::qux (int arg, float f) const volatile
+{
+  if (f > 0)
+    return 2 * arg - x;
+  else
+    return 2 * arg + x;
+}
+
+
+int main()
+{
+  A a;
+  int k;
+
+  k = 10;
+  a.x = k * 2;
+
+  k = a.foo(13);
+  
+  k += a.bar(15);
+
+  // Test for CHFts23426 follows
+  funk f;
+  f.getFunky(1, 2);
+  return 0;
+}
+
+
+
diff --git a/gdb/testsuite/gdb.c++/method.exp b/gdb/testsuite/gdb.c++/method.exp
new file mode 100644
index 0000000..a3939dc
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/method.exp
@@ -0,0 +1,233 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# tests for misc. C++ method stuff
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-08
+
+# This file is part of the gdb testsuite
+
+# This tests:
+# 0. method arguments are correct
+# 1. access to class data members inside method scopes
+# 2. correct param types for methods in ptype.
+# 3. const and volatile methods
+
+# (#0 and #1 above relate to an HP specific problem -- GDB must correctly
+# integrate FPARAM symbols in HP debug info into the local var list
+# for the function or method's block.)
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "method"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break A::foo\n"
+gdb_expect {
+   -re "Breakpoint \[0-9\]* at $hex.*file .*method.cc, line 38*\\.\r\n$gdb_prompt $" {
+       pass "set breakpoint on A::foo"
+   }
+   -re ".*$gdb_prompt $" { fail "set breakpoint on A::foo" }
+   timeout { fail "(timeout) set breakpoint on A::foo" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, A::foo \\(this=$hex, arg=13\\) at .*method\\.cc:38\r\n38\[\t \]*x \\+= arg;\r\n$gdb_prompt $" {
+      pass "continued and got breakpoint in A::foo"
+   }
+   -re ".*$gdb_prompt $" { fail "continuing and breaking in A::foo" }
+   timeout { fail "(timeout) continue" }
+}
+
+# Check ability to access this-relative stuff.
+
+send_gdb "print x\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 20\r\n$gdb_prompt $" {
+       pass "access this-relative x (in foo)"
+   }
+   -re ".*$gdb_prompt $" { fail "print x (in foo)" } 
+   timeout { fail "(timeout) print x (in foo)" }
+}
+
+# Check access to this pointer       
+
+send_gdb "print this\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(A \\*\\) $hex\r\n$gdb_prompt $" {
+       pass "print this (in foo)"
+   }
+   -re ".*$gdb_prompt $" { fail "print this (in foo)" }
+   timeout { fail "(timeout) print this (in foo)" }
+}
+
+# Now do everything over again for A::bar, because sometimes processing one method
+# (the first one) is fine, but the second one's debug info gets munged beyond recognition.
+
+send_gdb "break A::bar\n"
+gdb_expect {
+   -re "Breakpoint \[0-9\]* at $hex.*file .*method.cc, line 44\\.\r\n$gdb_prompt $" {
+       pass "set breakpoint on A::bar"
+   }
+   -re ".*$gdb_prompt $" { fail "set breakpoint on A::bar" }
+   timeout { fail "(timeout) set breakpoint on A::bar" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, A::bar \\(this=$hex, arg=15\\) at .*method\\.cc:44\r\n44\[\t \]*return arg \\+ 2 \\* x;\r\n$gdb_prompt $" {
+      pass "continued and got breakpoint in A::bar"
+   }
+   -re ".*$gdb_prompt $" { fail "continuing and breaking in A::bar" }
+   timeout { fail "(timeout) continue" }
+}
+
+# Check ability to access this-relative stuff.
+
+send_gdb "print x\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 33\r\n$gdb_prompt $" {
+       pass "access this-relative x (in bar)"
+   }
+   -re ".*$gdb_prompt $" { fail "print x (in bar)" }
+   timeout { fail "(timeout) print x (in bar)" }
+}
+
+# Check access to this pointer       
+
+send_gdb "print this\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(const class A \\*\\) $hex\r\n$gdb_prompt $" {
+       pass "print this (in bar)"
+   }
+   -re ".*$gdb_prompt $" { fail "print this (in bar)" }
+   timeout { fail "(timeout) print this (in bar)" }
+}
+
+# Check again with funk::getFunky (this is the original test case
+# for CHFts23426); sometimes having a constructor with no arguments
+# will nuke the debug info read in for other methods in the class.
+
+send_gdb "break funk::getFunky\n"
+gdb_expect {
+   -re "Breakpoint \[0-9\]* at $hex.*file .*method.cc, line 20\\.\r\n$gdb_prompt $" {
+       pass "set breakpoint on funk::getFunky"
+   }
+   -re ".*$gdb_prompt $" { fail "set breakpoint on funk::getfunky" }
+   timeout { fail "(timeout) set breakpoint on funk::getfunky" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, funk::getFunky \\(this=$hex, a=1, b=2\\) at .*method\\.cc:20\r\n20\[\t \]*res = a \\+ b - data_;\r\n$gdb_prompt $" {
+      pass "continued and got breakpoint in funk::getfunky"
+   }
+   -re ".*$gdb_prompt $" { fail "continuing and breaking in funk::getfunky" }
+   timeout { fail "(timeout) continue" }
+}
+
+# Check ability to access this-relative stuff.
+
+send_gdb "print data_\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 33\r\n$gdb_prompt $" {
+       pass "access this-relative data_ in getFunky"
+   }
+   -re ".*$gdb_prompt $" { fail "print data_ in getFunky" }
+   timeout { fail "(timeout) print data_ in getFunky" }
+}
+
+# Check access to this pointer       
+
+send_gdb "print this\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\(funk \\*\\) $hex\r\n$gdb_prompt $" {
+       pass "print this in getFunky"
+   }
+   -re ".*$gdb_prompt $" { fail "print this in getfunky" }
+   timeout { fail "(timeout) print this in getfunky" }
+}
+
+# Check access to local variable
+
+send_gdb "print res\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \[0-9\]*\r\n$gdb_prompt $" {
+       pass "print res in getFunky"
+   }
+   -re ".*$gdb_prompt $" { fail "print res in getfunky" }
+   timeout { fail "(timeout) print res in getfunky" }
+}
+
+
+# Check ptype of class -- should show const/volatile methods
+
+send_gdb "ptype A\n"
+gdb_expect {
+   -re "type = class A \{\r\n\[ \]*public:\r\n\[ \]*int x;\r\n\[ \]*int y;\r\n\r\n\\[ \]*A & operator=\\(A const &\\);\r\n\[ \]*A\\(A const &\\)\r\n\[ \]*A\\(void\\)\r\n[ \]*int foo\\(int\\);\r\n\[ \]*int bar\\(int\\) const;\r\n\[ \]*int baz\\(int, char\\) volatile;\r\n\[ \]*int qux\\(int, float\\) const volatile;\r\n\}\r\n$gdb_prompt $" {
+      pass "ptype A"
+   }
+   -re "type = class A \{\r\n\[ \]*public:\r\n\[ \]*int x;\r\n\[ \]*int y;\r\n\r\n\[ \]*int foo\\(int\\);\r\n\[ \]*int bar\\(int\\) const;\r\n\[ \]*int baz\\(int, char\\);\r\n\[ \]*int qux\\(int, float\\) const;\r\n\}\r\n$gdb_prompt $" {
+      pass "ptype A (HP aCC bug -- volatile not indicated)"
+   }
+   -re "type = class A \{\r\n\[ \]*public:\r\n\[ \]*int x;\r\n\[ \]*int y;\r\n\r\n\[ \]*int foo\\(int\\);\r\n\[ \]*int bar\\(int\\) const;\r\n\[ \]*int baz\\(int, char\\) volatile;\r\n\[ \]*int qux\\(int, float\\) const volatile;\r\n\}\r\n$gdb_prompt $" {
+      pass "ptype A"
+   }
+   -re ".*$gdb_prompt $" { fail "ptype A" }
+   timeout { fail "(timeout) ptype A" }
+}
+
+send_gdb "cont\n"
+gdb_expect {
+    -re "Continuing.\r\n\r\nProgram exited normally.\r\n$gdb_prompt $" {
+        pass "finish program"
+    }
+    -re "$gdb_prompt $" { fail "finish program"  }
+    timeout { fail "(timeout) finish program"  }
+}
+
diff --git a/gdb/testsuite/gdb.c++/misc.cc b/gdb/testsuite/gdb.c++/misc.cc
new file mode 100644
index 0000000..ffeb739
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/misc.cc
@@ -0,0 +1,517 @@
+// Test various -*- C++ -*- things.
+
+typedef struct fleep fleep;
+struct fleep { int a; } s;
+
+// ====================== simple class structures  =======================
+
+struct default_public_struct {
+ // defaults to public:
+  int a;
+  int b;
+};
+
+struct explicit_public_struct {
+ public:
+  int a;
+  int b;
+};
+
+struct protected_struct {
+ protected:
+  int a;
+  int b;
+};
+
+struct private_struct {
+ private:
+  int a;
+  int b;
+};
+
+struct mixed_protection_struct {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+class public_class {
+ public:
+  int a;
+  int b;
+};
+
+class protected_class {
+ protected:
+  int a;
+  int b;
+};
+
+class default_private_class {
+ // defaults to private:
+  int a;
+  int b;
+};
+
+class explicit_private_class {
+ private:
+  int a;
+  int b;
+};
+
+class mixed_protection_class {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+class const_vol_method_class {
+public:
+  int a;
+  int b;
+  int foo (int &) const;
+  int bar (int &) volatile;
+  int baz (int &) const volatile;
+};
+
+int const_vol_method_class::foo (int & ir) const
+{
+  return ir + 3;
+}
+int const_vol_method_class::bar (int & ir) volatile
+{
+  return ir + 4;
+}
+int const_vol_method_class::baz (int & ir) const volatile
+{
+  return ir + 5;
+}
+
+// ========================= simple inheritance ==========================
+
+class A {
+ public:
+  int a;
+  int x;
+};
+
+A g_A;
+
+class B : public A {
+ public:
+  int b;
+  int x;
+};
+
+B g_B;
+
+class C : public A {
+ public:
+  int c;
+  int x;
+};
+
+C g_C;
+
+class D : public B, public C {
+ public:
+  int d;
+  int x;
+};
+
+D g_D;
+
+class E : public D {
+ public:
+  int e;
+  int x;
+};
+
+E g_E;
+
+class class_with_anon_union
+{
+ public:
+  int one;
+  union
+  {
+    int a;
+    long b;
+  };
+};
+
+class_with_anon_union g_anon_union;
+
+void inheritance2 (void)
+{
+}
+
+void inheritance1 (void)
+{
+  int ival;
+  int *intp;
+
+  // {A::a, A::x}
+
+  g_A.A::a = 1;
+  g_A.A::x = 2;
+
+  // {{A::a,A::x},B::b,B::x}
+
+  g_B.A::a = 3;
+  g_B.A::x = 4;
+  g_B.B::b = 5;
+  g_B.B::x = 6;
+
+  // {{A::a,A::x},C::c,C::x}
+
+  g_C.A::a = 7;
+  g_C.A::x = 8;
+  g_C.C::c = 9;
+  g_C.C::x = 10;
+
+  // {{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_D, ival = 11;
+       intp < ((int *) &g_D + sizeof (g_D) / sizeof (int));
+       intp++, ival++)
+    {
+      *intp = ival;
+    }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 11;  (g_D.A::a = 11; is ambiguous)
+  // ????? = 12;  (g_D.A::x = 12; is ambiguous)
+  g_D.B::b = 13;
+  g_D.B::x = 14;
+  // ????? = 15;
+  // ????? = 16;
+  g_D.C::c = 17;
+  g_D.C::x = 18;
+  g_D.D::d = 19;
+  g_D.D::x = 20;
+
+
+  // {{{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}},E::e,E::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_E, ival = 21;
+       intp < ((int *) &g_E + sizeof (g_E) / sizeof (int));
+       intp++, ival++)
+  {
+    *intp = ival;
+  }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 21;  (g_E.A::a = 21; is ambiguous)
+  // ????? = 22;  (g_E.A::x = 22; is ambiguous)
+  g_E.B::b = 23;
+  g_E.B::x = 24;
+  // ????? = 25;
+  // ????? = 26;
+  g_E.C::c = 27;
+  g_E.C::x = 28;
+  g_E.D::d = 29;
+  g_E.D::x = 30;
+  g_E.E::e = 31;
+  g_E.E::x = 32;
+
+  g_anon_union.one = 1;
+  g_anon_union.a = 2;
+
+  inheritance2 ();	
+}
+
+// ======================== virtual base classes=========================
+
+class vA {
+ public:
+  int va;
+  int vx;
+};
+
+vA g_vA;
+
+class vB : public virtual vA {
+ public:
+  int vb;
+  int vx;
+};
+
+vB g_vB;
+
+class vC : public virtual vA {
+ public:
+  int vc;
+  int vx;
+};
+
+vC g_vC;
+
+class vD : public virtual vB, public virtual vC {
+ public:
+  int vd;
+  int vx;
+};
+
+vD g_vD;
+
+class vE : public virtual vD {
+ public:
+  int ve;
+  int vx;
+};
+
+vE g_vE;
+
+void inheritance4 (void)
+{
+}
+
+void inheritance3 (void)
+{
+  int ival;
+  int *intp;
+
+  // {vA::va, vA::vx}
+
+  g_vA.vA::va = 1;
+  g_vA.vA::vx = 2;
+
+  // {{vA::va, vA::vx}, vB::vb, vB::vx}
+
+  g_vB.vA::va = 3;
+  g_vB.vA::vx = 4;
+  g_vB.vB::vb = 5;
+  g_vB.vB::vx = 6;
+
+  // {{vA::va, vA::vx}, vC::vc, vC::vx}
+
+  g_vC.vA::va = 7;
+  g_vC.vA::vx = 8;
+  g_vC.vC::vc = 9;
+  g_vC.vC::vx = 10;
+
+  // {{{{vA::va, vA::vx}, vB::vb, vB::vx}, vC::vc, vC::vx}, vD::vd,vD::vx}
+
+  g_vD.vA::va = 11;
+  g_vD.vA::vx = 12;
+  g_vD.vB::vb = 13;
+  g_vD.vB::vx = 14;
+  g_vD.vC::vc = 15;
+  g_vD.vC::vx = 16;
+  g_vD.vD::vd = 17;
+  g_vD.vD::vx = 18;
+
+
+  // {{{{{vA::va,vA::vx},vB::vb,vB::vx},vC::vc,vC::vx},vD::vd,vD::vx},vE::ve,vE::vx}
+
+  g_vD.vA::va = 19;
+  g_vD.vA::vx = 20;
+  g_vD.vB::vb = 21;
+  g_vD.vB::vx = 22;
+  g_vD.vC::vc = 23;
+  g_vD.vC::vx = 24;
+  g_vD.vD::vd = 25;
+  g_vD.vD::vx = 26;
+  g_vE.vE::ve = 27;
+  g_vE.vE::vx = 28;
+
+  inheritance4 ();	
+}
+
+// ======================================================================
+
+class Base1 {
+ public:
+  int x;
+  Base1(int i) { x = i; }
+};
+
+class Foo
+{
+ public:
+  int x;
+  int y;
+  static int st;
+  Foo (int i, int j) { x = i; y = j; }
+  int operator! ();
+  operator int ();
+  int times (int y);
+};
+
+class Bar : public Base1, public Foo {
+ public:
+  int z;
+  Bar (int i, int j, int k) : Base1 (10*k), Foo (i, j) { z = k; }
+};
+
+class ClassWithEnum {
+public:
+  enum PrivEnum { red, green, blue, yellow = 42 };
+  PrivEnum priv_enum;
+  int x;
+};
+
+int Foo::operator! () { return !x; }
+
+int Foo::times (int y) { return x * y; }
+
+int Foo::st = 100;
+
+Foo::operator int() { return x; }
+
+Foo foo(10, 11);
+Bar bar(20, 21, 22);
+
+class Contains_static_instance
+{
+ public:
+  int x;
+  int y;
+  Contains_static_instance (int i, int j) { x = i; y = j; }
+  static Contains_static_instance null;
+};
+
+Contains_static_instance Contains_static_instance::null(0,0);
+Contains_static_instance csi(10,20);
+
+class Contains_nested_static_instance
+{
+ public:
+  class Nested
+  {
+   public:
+    Nested(int i) : z(i) {}
+    int z;
+    static Contains_nested_static_instance xx;
+  };
+
+  Contains_nested_static_instance(int i, int j) : x(i), y(j) {}
+
+  int x;
+  int y;
+
+  static Contains_nested_static_instance null;
+  static Nested yy;
+};
+
+Contains_nested_static_instance Contains_nested_static_instance::null(0, 0);
+Contains_nested_static_instance::Nested Contains_nested_static_instance::yy(5);
+Contains_nested_static_instance
+  Contains_nested_static_instance::Nested::xx(1,2);
+Contains_nested_static_instance cnsi(30,40);
+
+typedef struct {
+  int one;
+  int two;
+} tagless_struct;
+tagless_struct v_tagless;
+
+/* Try to get the compiler to allocate a class in a register.  */
+class small {
+ public:
+  int x;
+  int method ();
+};
+
+int
+small::method ()
+{
+  return x + 5;
+}
+
+void marker_reg1 () {}
+
+int
+register_class ()
+{
+  /* We don't call any methods for v, so gcc version cygnus-2.3.3-930220
+     might put this variable in a register.  This is a lose, though, because
+     it means that GDB can't call any methods for that variable.  */
+  register small v;
+
+  int i;
+
+  /* Perform a computation sufficiently complicated that optimizing compilers
+     won't optimized out the variable.  If some compiler constant-folds this
+     whole loop, maybe using a parameter to this function here would help.  */
+  v.x = 0;
+  for (i = 0; i < 13; ++i)
+    v.x += i;
+  --v.x; /* v.x is now 77 */
+  marker_reg1 ();
+  return v.x + 5;
+}
+
+int
+main()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  inheritance1 ();
+  inheritance3 ();
+  register_class ();
+
+  /* FIXME: pmi gets optimized out.  Need to do some more computation with
+     it or something.  (No one notices, because the test is xfail'd anyway,
+     but that probably won't always be true...).  */
+  int Foo::* pmi = &Foo::y;
+
+  /* Make sure the AIX linker doesn't remove the variable.  */
+  v_tagless.one = 5;
+
+  /* Class with enumeration inside it */ 
+  ClassWithEnum obj_with_enum;
+  obj_with_enum.priv_enum = ClassWithEnum::green;
+
+  return foo.*pmi;
+}
+
+/* Create an instance for some classes, otherwise they get optimized away.  */
+
+default_public_struct default_public_s;
+explicit_public_struct explicit_public_s;
+protected_struct protected_s;
+private_struct private_s;
+mixed_protection_struct mixed_protection_s;
+public_class public_c;
+protected_class protected_c;
+default_private_class default_private_c;
+explicit_private_class explicit_private_c;
+mixed_protection_class mixed_protection_c;
diff --git a/gdb/testsuite/gdb.c++/misc.exp b/gdb/testsuite/gdb.c++/misc.exp
new file mode 100644
index 0000000..6090fbb
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/misc.exp
@@ -0,0 +1,106 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "misc"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Deduce language of main()
+#
+
+proc deduce_language_of_main {} {
+    global gdb_prompt
+
+    # See what language gdb thinks main() is, prior to reading full symbols.
+    # I think this fails for COFF targets.
+    setup_xfail "a29k-*-udi"
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"auto; currently c\[+\]+\".*$gdb_prompt $" {
+	    pass "deduced language is C++, before full symbols"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "source language not correct for C++ (psymtabs only)"
+	    return
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return
+	}
+    }
+
+    runto_main
+
+    # See if our idea of the language has changed.
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"auto; currently c\[+\]+\".*$gdb_prompt $" {
+	    pass "deduced language is C++, after full symbols"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "source language not correct for C++ (full symbols)"
+	    return
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return
+	}
+    }
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    deduce_language_of_main
+    # Check for fixes for PRs 8916 and 8630
+    gdb_test "print s.a" ".* = 0" "print s.a for foo struct (known gcc 2.7.2 and earlier bug)"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.c++/overload.cc b/gdb/testsuite/gdb.c++/overload.cc
new file mode 100644
index 0000000..40feb3b
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/overload.cc
@@ -0,0 +1,151 @@
+#include <stddef.h>
+
+class foo {
+public:
+  foo  (int);
+  foo  (int, const char *);
+  foo  (foo&);
+  ~foo ();
+  void foofunc (int);
+  void foofunc (int, signed char *);
+  int ifoo;
+  const char *ccpfoo;
+
+int overload1arg (void);
+int overload1arg (char);         
+int overload1arg (signed char);
+int overload1arg (unsigned char);
+int overload1arg (short);
+int overload1arg (unsigned short);
+int overload1arg (int);
+int overload1arg (unsigned int);
+int overload1arg (long);
+int overload1arg (unsigned long);
+int overload1arg (float);
+int overload1arg (double);
+
+int overloadargs (int a1);
+int overloadargs (int a1, int a2);
+int overloadargs (int a1, int a2, int a3);
+int overloadargs (int a1, int a2, int a3, int a4);
+int overloadargs (int a1, int a2, int a3, int a4, int a5);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7, int a8);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7, int a8, int a9);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10, int a11);
+
+
+};
+
+void marker1()
+{}
+
+int main () 
+{
+    char arg2 = 2;
+    signed char arg3 =3;
+    unsigned char arg4 =4;
+    short arg5 =5;
+    unsigned short arg6 =6;
+    int arg7 =7;
+    unsigned int arg8 =8;
+    long arg9 =9;
+    unsigned long arg10 =10;
+    float arg11 =100.0;
+    double arg12 = 200.0;
+
+    char *str = "A";
+    foo foo_instance1(111);
+    foo foo_instance2(222, str);
+    foo foo_instance3(foo_instance2);
+
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+
+
+    marker1();
+    return 0; 
+}
+
+foo::foo  (int i)                  { ifoo = i; ccpfoo = NULL; }
+foo::foo  (int i, const char *ccp) { ifoo = i; ccpfoo = ccp; }
+foo::foo  (foo& afoo)              { ifoo = afoo.ifoo; ccpfoo = afoo.ccpfoo;}
+foo::~foo ()                       {}
+
+
+/* Some functions to test overloading by varying one argument type. */
+
+int foo::overload1arg (void)                {  return 1; }
+int foo::overload1arg (char arg)            { arg = 0; return 2;}
+int foo::overload1arg (signed char arg)     { arg = 0; return 3;}
+int foo::overload1arg (unsigned char arg)   { arg = 0; return 4;}
+int foo::overload1arg (short arg)           { arg = 0; return 5;}
+int foo::overload1arg (unsigned short arg)  { arg = 0; return 6;}
+int foo::overload1arg (int arg)             { arg = 0; return 7;}
+int foo::overload1arg (unsigned int arg)    { arg = 0; return 8;}
+int foo::overload1arg (long arg)            { arg = 0; return 9;}
+int foo::overload1arg (unsigned long arg)   { arg = 0; return 10;}
+int foo::overload1arg (float arg)           { arg = 0; return 11;}
+int foo::overload1arg (double arg)          { arg = 0; return 12;}
+
+
+/* Some functions to test overloading by varying argument count. */
+
+int foo::overloadargs (int a1)                 
+{ a1 = 0; 
+return 1;}
+
+int foo::overloadargs (int a1, int a2)          
+{ a1 = a2 = 0; 
+return 2;}
+
+int foo::overloadargs (int a1, int a2, int a3)              
+{ a1 = a2 = a3 = 0; 
+return 3;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4)
+{ a1 = a2 = a3 = a4 = 0; 
+return 4;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5)
+{ a1 = a2 = a3 = a4 = a5 = 0; 
+return 5;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6)
+{ a1 = a2 = a3 = a4 = a5 = a6 = 0; 
+return 6;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7)
+{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = 0; 
+return 7;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8)
+{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = 0; 
+return 8;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9)
+{ 
+  a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 = 0; 
+  return 9;
+}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10)
+                        { a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+                          a10 = 0; return 10;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10, int a11)
+                        { a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+                          a10 = a11 = 0; return 11;}
+
+
+
diff --git a/gdb/testsuite/gdb.c++/overload.exp b/gdb/testsuite/gdb.c++/overload.exp
new file mode 100644
index 0000000..b1ddb163
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/overload.exp
@@ -0,0 +1,338 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for overloaded member functions. Command Line calls
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "overload"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+
+send_gdb "print foo_instance1\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{ifoo = 111, ccpfoo = 0x0\}\r\n$gdb_prompt $" {
+        pass "print foo_instance1"
+      }
+    -re ".*$gdb_prompt $" { fail "print foo_instance1" }
+    timeout           { fail "(timeout) print foo_instance1" }
+  }
+
+
+send_gdb "ptype foo_instance1\n"
+gdb_expect {
+  -re "type = class foo \{.*public:.*int ifoo;.*const char \\*ccpfoo;.*foo\\(int\\);.*foo\\(int, (const char|char const) \\*\\);.*foo\\(foo &\\);.*~foo\\(void\\);.*void foofunc\\(int\\);.*void foofunc\\(int, signed char \\*\\);.*int overload1arg\\(void\\);.*int overload1arg\\(char\\);.*int overload1arg\\(signed char\\);.*int overload1arg\\(unsigned char\\);.*int overload1arg\\(short\\);.*int overload1arg\\(unsigned short\\);.*int overload1arg\\(int\\);.*int overload1arg\\(unsigned int\\);.*int overload1arg\\(long\\);.*int overload1arg\\(unsigned long\\);.*int overload1arg\\(float\\);.*int overload1arg\\(double\\);.*int overloadargs\\(int\\);.*int overloadargs\\(int, int\\);.*int overloadargs\\(int, int, int\\);.*int overloadargs\\(int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int, int, int, int, int\\);.*int overloadargs\\(int, int, int, int, int, int, int, int, int, int, int\\);\r\n\}\r\n$gdb_prompt $" {
+        pass "ptype foo_instance1 (HP aCC -- known quirk with ~foo parameter list)"
+      }
+    -re ".*$gdb_prompt $" { fail "ptype foo_instance1" }
+    timeout           { fail "(timeout) ptype foo_instance1" }
+  }
+
+send_gdb "print foo_instance2\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{ifoo = 222, ccpfoo = $hex \"A\"\}\r\n$gdb_prompt $" {
+        pass "print foo_instance2"
+      }
+    -re ".*$gdb_prompt $" { fail "print foo_instance2" }
+    timeout           { fail "(timeout) print foo_instance2" }
+  }
+
+send_gdb "print foo_instance3\n"
+gdb_expect {
+    -re ".\[0-9\]* = \{ifoo = 222, ccpfoo = $hex \"A\"\}\r\n$gdb_prompt $" {
+        pass "print foo_instance3"
+      }
+    -re ".*$gdb_prompt $" { fail "print foo_instance3" }
+    timeout           { fail "(timeout) print foo_instance3" }
+  }
+
+
+
+send_gdb "print foo_instance1.overloadargs(1)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1\r\n$gdb_prompt $" {
+        pass "print call overloaded func 1 arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 1 arg" }
+    timeout           { fail "(timeout) print call overloaded func 1 arg" }
+  }
+
+send_gdb "print foo_instance1.overloadargs(1, 2)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2\r\n$gdb_prompt $" {
+        pass "print call overloaded func 2 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 2 args" }
+    timeout           { fail "(timeout) print call overloaded func 2  args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3\r\n$gdb_prompt $" {
+        pass "print call overloaded func 3 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 3 args" }
+    timeout           { fail "(timeout) print call overloaded func 3 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4\r\n$gdb_prompt $" {
+        pass "print call overloaded func 4 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 4 args" }
+    timeout           { fail "(timeout) print call overloaded func 4 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 5\r\n$gdb_prompt $" {
+        pass "print call overloaded func 5 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 5 args" }
+    timeout           { fail "(timeout) print call overloaded func 5 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 6\r\n$gdb_prompt $" {
+        pass "print call overloaded func 6 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 6 args" }
+    timeout           { fail "(timeout) print call overloaded func 6 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7\r\n$gdb_prompt $" {
+        pass "print call overloaded func 7 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 7 args" }
+    timeout           { fail "(timeout) print call overloaded func 7 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 8\r\n$gdb_prompt $" {
+        pass "print call overloaded func 8 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 8 args" }
+    timeout           { fail "(timeout) print call overloaded func 8 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 9\r\n$gdb_prompt $" {
+        pass "print call overloaded func 9 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 9 args" }
+    timeout           { fail "(timeout) print call overloaded func 9 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 10\r\n$gdb_prompt $" {
+        pass "print call overloaded func 10 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 10 args" }
+    timeout           { fail "(timeout) print call overloaded func 10 args" }
+  }
+
+
+send_gdb "print foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 11\r\n$gdb_prompt $" {
+        pass "print call overloaded func 11 args"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func 11 args" }
+    timeout           { fail "(timeout) print call overloaded func 11 args" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg()\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1\r\n$gdb_prompt $" {
+        pass "print call overloaded func void arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func void arg" }
+    timeout           { fail "(timeout) print call overloaded func void arg" }
+  }
+
+send_gdb "print foo_instance1.overload1arg((char)arg2)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2\r\n$gdb_prompt $" {
+        pass "print call overloaded func char arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func char arg" }
+    timeout           { fail "(timeout) print call overloaded func char arg" }
+  }
+
+send_gdb "print foo_instance1.overload1arg((signed char)arg3)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3\r\n$gdb_prompt $" {
+        pass "print call overloaded func signed char arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func signed char arg" }
+    timeout           { fail "(timeout) print call overloaded func signed char arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((unsigned char)arg4)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 4\r\n$gdb_prompt $" {
+        pass "print call overloaded func unsigned char arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func unsigned char arg" }
+    timeout           { fail "(timeout) print call overloaded func unsigned char arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((short)arg5)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 5\r\n$gdb_prompt $" {
+        pass "print call overloaded func short arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func short arg" }
+    timeout           { fail "(timeout) print call overloaded func short arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((unsigned short)arg6)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 6\r\n$gdb_prompt $" {
+        pass "print call overloaded func unsigned short arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func unsigned short  arg" }
+    timeout           { fail "(timeout) print call overloaded func unsigned short arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((int)arg7)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7\r\n$gdb_prompt $" {
+        pass "print call overloaded func int arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func int arg" }
+    timeout           { fail "(timeout) print call overloaded func int arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((unsigned int)arg8)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 8\r\n$gdb_prompt $" {
+        pass "print call overloaded func unsigned int arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func unsigned int arg" }
+    timeout           { fail "(timeout) print call overloaded func unsigned int arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((long)arg9)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 9\r\n$gdb_prompt $" {
+        pass "print call overloaded func long arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func long arg" }
+    timeout           { fail "(timeout) print call overloaded func long arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((unsigned long)arg10)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 10\r\n$gdb_prompt $" {
+        pass "print call overloaded func unsigned long arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func unsigned long arg" }
+    timeout           { fail "(timeout) print call overloaded func unsigned long arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((float)arg11)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 11\r\n$gdb_prompt $" {
+        pass "print call overloaded func float arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func float arg" }
+    timeout           { fail "(timeout) print call overloaded func float arg" }
+  }
+
+
+send_gdb "print foo_instance1.overload1arg((double)arg12)\n"
+gdb_expect {
+    -re ".\[0-9\]* = 12\r\n$gdb_prompt $" {
+        pass "print call overloaded func double arg"
+      }
+    -re ".*$gdb_prompt $" { fail "print call overloaded func double arg" }
+    timeout           { fail "(timeout) print call overloaded func double arg" }
+  }
diff --git a/gdb/testsuite/gdb.c++/ovldbreak.cc b/gdb/testsuite/gdb.c++/ovldbreak.cc
new file mode 100644
index 0000000..9a5b5cb
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ovldbreak.cc
@@ -0,0 +1,177 @@
+#include <stddef.h>
+
+class foo {
+public:
+  foo  (int);
+  foo  (int, const char *);
+  foo  (foo&);
+  ~foo ();
+  void foofunc (int);
+  void foofunc (int, signed char *);
+  int ifoo;
+  const char *ccpfoo;
+
+int overload1arg (void);
+int overload1arg (char);         
+int overload1arg (signed char);
+int overload1arg (unsigned char);
+int overload1arg (short);
+int overload1arg (unsigned short);
+int overload1arg (int);
+int overload1arg (unsigned int);
+int overload1arg (long);
+int overload1arg (unsigned long);
+int overload1arg (float);
+int overload1arg (double);
+
+int overloadargs (int a1);
+int overloadargs (int a1, int a2);
+int overloadargs (int a1, int a2, int a3);
+int overloadargs (int a1, int a2, int a3, int a4);
+int overloadargs (int a1, int a2, int a3, int a4, int a5);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7, int a8);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7, int a8, int a9);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10);
+int overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10, int a11);
+
+
+};
+
+void marker1()
+{}
+
+int main () 
+{
+    char arg2 = 2;
+    signed char arg3 =3;
+    unsigned char arg4 =4;
+    short arg5 =5;
+    unsigned short arg6 =6;
+    int arg7 =7;
+    unsigned int arg8 =8;
+    long arg9 =9;
+    unsigned long arg10 =10;
+    float arg11 =100.0;
+    double arg12 = 200.0;
+
+    char ch='A';
+    foo foo_instance1(111);
+    foo foo_instance2(222, &ch);
+    foo foo_instance3(foo_instance2);
+
+    foo_instance1.overload1arg();
+    foo_instance1.overload1arg(arg2);
+    foo_instance1.overload1arg(arg3);
+    foo_instance1.overload1arg(arg4);
+    foo_instance1.overload1arg(arg5);
+    foo_instance1.overload1arg(arg6);
+    foo_instance1.overload1arg(arg7);
+    foo_instance1.overload1arg(arg8);
+    foo_instance1.overload1arg(arg9);
+    foo_instance1.overload1arg(arg10);
+    foo_instance1.overload1arg(arg11);
+    foo_instance1.overload1arg(arg12);
+
+    foo_instance1.overloadargs(1);
+    foo_instance1.overloadargs(1, 2);
+    foo_instance1.overloadargs(1, 2, 3);
+    foo_instance1.overloadargs(1, 2, 3, 4);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10);
+    foo_instance1.overloadargs(1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11);
+   
+
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+
+
+    marker1();
+    return 0; 
+}
+
+foo::foo  (int i)                  { ifoo = i;}
+foo::foo  (int i, const char *ccp) { ifoo = i; ccpfoo = ccp; }
+foo::foo  (foo& afoo)              { ifoo = afoo.ifoo; ccpfoo = afoo.ccpfoo;}
+foo::~foo ()                       {}
+
+
+/* Some functions to test overloading by varying one argument type. */
+
+int foo::overload1arg (void)                {  return 1; }
+int foo::overload1arg (char arg)            { arg = 0; return 2;}
+int foo::overload1arg (signed char arg)     { arg = 0; return 3;}
+int foo::overload1arg (unsigned char arg)   { arg = 0; return 4;}
+int foo::overload1arg (short arg)           { arg = 0; return 5;}
+int foo::overload1arg (unsigned short arg)  { arg = 0; return 6;}
+int foo::overload1arg (int arg)             { arg = 0; return 7;}
+int foo::overload1arg (unsigned int arg)    { arg = 0; return 8;}
+int foo::overload1arg (long arg)            { arg = 0; return 9;}
+int foo::overload1arg (unsigned long arg)   { arg = 0; return 10;}
+int foo::overload1arg (float arg)           { arg = 0; return 11;}
+int foo::overload1arg (double arg)          { arg = 0; return 12;}
+
+
+/* Some functions to test overloading by varying argument count. */
+
+int foo::overloadargs (int a1)                 
+{ a1 = 0; 
+return 1;}
+
+int foo::overloadargs (int a1, int a2)          
+{ a1 = a2 = 0; 
+return 2;}
+
+int foo::overloadargs (int a1, int a2, int a3)              
+{ a1 = a2 = a3 = 0; 
+return 3;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4)
+{ a1 = a2 = a3 = a4 = 0; 
+return 4;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5)
+{ a1 = a2 = a3 = a4 = a5 = 0; 
+return 5;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6)
+{ a1 = a2 = a3 = a4 = a5 = a6 = 0; 
+return 6;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7)
+{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = 0; 
+return 7;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8)
+{ a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = 0; 
+return 8;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9)
+{ 
+  a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 = 0; 
+  return 9;
+}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10)
+                        { a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+                          a10 = 0; return 10;}
+
+int foo::overloadargs (int a1, int a2, int a3, int a4, int a5, int a6, int a7,
+                   int a8, int a9, int a10, int a11)
+                        { a1 = a2 = a3 = a4 = a5 = a6 = a7 = a8 = a9 =
+                          a10 = a11 = 0; return 11;}
+
+
+
diff --git a/gdb/testsuite/gdb.c++/ovldbreak.exp b/gdb/testsuite/gdb.c++/ovldbreak.exp
new file mode 100644
index 0000000..c90b51d
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ovldbreak.exp
@@ -0,0 +1,680 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for overloaded member functions. Set breakpoints on
+# overloaded member functions
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "ovldbreak"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "12\n"
+            gdb_expect {
+               -re "Breakpoint 2 at $hex: file.*$srcfile, line 111.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(char)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(char) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(char) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(char)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(char)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111" \
+    "breakpoint info"
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "11\n"
+            gdb_expect {
+               -re "Breakpoint 3 at $hex: file.*$srcfile, line 112.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(signed char)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(signed char) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(signed char) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(signed char)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(signed char)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112" \
+    "breakpoint info"
+
+
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "10\n"
+            gdb_expect {
+               -re "Breakpoint 4 at $hex: file.*$srcfile, line 113.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(unsigned char)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(unsigned char) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(unsigned char) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(unsigned char)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(unsigned char)(wrong menu)" }
+  }
+
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "9\n"
+            gdb_expect {
+               -re "Breakpoint 5 at $hex: file.*$srcfile, line 114.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(short)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(short) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(short) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(short)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(short)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "8\n"
+            gdb_expect {
+               -re "Breakpoint 6 at $hex: file.*$srcfile, line 115.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(unsigned short)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(unsigned short) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(unsigned short) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(unsigned short)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(unsigned short)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "7\n"
+            gdb_expect {
+               -re "Breakpoint 7 at $hex: file.*$srcfile, line 116.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(int)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(int) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(int) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(int)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(int)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "6\n"
+            gdb_expect {
+               -re "Breakpoint 8 at $hex: file.*$srcfile, line 117.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(unsigned int)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(unsigned int) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(unsigned int) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(unsigned int)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(unsigned int)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "5\n"
+            gdb_expect {
+               -re "Breakpoint 9 at $hex: file.*$srcfile, line 118.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(long)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(long) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(long) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(long)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(long)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "4\n"
+            gdb_expect {
+               -re "Breakpoint 10 at $hex: file.*$srcfile, line 119.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(unsigned long)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(unsigned long) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(unsigned long) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(unsigned long)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(unsigned long)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119" \
+    "breakpoint info"
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "3\n"
+            gdb_expect {
+               -re "Breakpoint 11 at $hex: file.*$srcfile, line 120.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(float)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(float) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(float) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(float)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(float)(wrong menu)" }
+  }
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(float\\) at.*$srcfile:120" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "2\n"
+            gdb_expect {
+               -re "Breakpoint 12 at $hex: file.*$srcfile, line 121.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(double)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(double) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(double) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(double)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(double)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(float\\) at.*$srcfile:120\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(double\\) at.*$srcfile:121" \
+    "breakpoint info"
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "13\n"
+            gdb_expect {
+               -re "Breakpoint 13 at $hex: file.*$srcfile, line 110.\r\n$gdb_prompt $" {
+                       pass "set bp on overload1arg(void)" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on overload1arg(void) wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on overload1arg(void) wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on overload1arg(void)(wrong menu)" }
+    timeout           { fail "(timeout)set bp on overload1arg(void)(wrong menu)" }
+  }
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(float\\) at.*$srcfile:120\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(double\\) at.*$srcfile:121\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(void\\) at.*$srcfile:110" \
+    "breakpoint info"
+
+
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "0\n"
+            gdb_expect {
+               -re "cancelled\r\n$gdb_prompt $" {
+                       pass "set bp cancelled" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp cancelled  wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp cancelled wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp cancelled(wrong menu)" }
+    timeout           { fail "(timeout)set bp cancelled(wrong menu)" }
+  }
+
+
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in main at.*$srcfile:49\r
+\[\t \]+breakpoint already hit 1 time\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(float\\) at.*$srcfile:120\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(double\\) at.*$srcfile:121\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(void\\) at.*$srcfile:110" \
+    "breakpoint info"
+
+
+
+
+
+send_gdb "delete breakpoints\n"
+gdb_expect {
+  -re "Delete all breakpoints.*$" {
+        send_gdb "y\n"
+        gdb_expect {
+            -re ".*$gdb_prompt $" {
+                send_gdb "info breakpoints\n"
+                gdb_expect {
+                    -re "No breakpoints or watchpoints..*$gdb_prompt $" {
+                        pass "Deleted all breakpoints"
+                    }
+                    -re ".*$gdb_prompt $"       { fail "Deleted all breakpoints" }
+                    timeout                 { fail "Deleted all breakpoints (timeout)" }
+                }
+            }
+            timeout                 { fail "Deleted all breakpoints (timeout)" }
+        }
+    }
+    -re ".*$gdb_prompt $"       { fail "Deleted all breakpoints" }
+    timeout                 { fail "Deleted all breakpoints (timeout)" }
+}
+
+          
+
+
+send_gdb "break foo::overload1arg\n" 
+gdb_expect {
+-re "\\\[0\\\] cancel\r\n\\\[1\\\] all\r\n\\\[2\\\] foo::overload1arg\\(double\\) at.*$srcfile:121\r\n\\\[3\\\] foo::overload1arg\\(float\\) at.*$srcfile:120\r\n\\\[4\\\] foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r\n\\\[5\\\] foo::overload1arg\\(long\\) at.*$srcfile:118\r\n\\\[6\\\] foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r\n\\\[7\\\] foo::overload1arg\\(int\\) at.*$srcfile:116\r\n\\\[8\\\] foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r\n\\\[9\\\] foo::overload1arg\\(short\\) at.*$srcfile:114\r\n\\\[10\\\] foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r\n\\\[11\\\] foo::overload1arg\\(signed char\\) at.*$srcfile:112\r\n\\\[12\\\] foo::overload1arg\\(char\\) at.*$srcfile:111\r\n\\\[13\\\] foo::overload1arg\\(void\\) at.*$srcfile:110\r\n> $" {
+            send_gdb "1\n"
+            gdb_expect {
+               -re "Breakpoint $decimal at $hex: file.*$srcfile, line 121.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 120.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 119.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 118.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 117.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 116.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 115.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 114.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 113.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 112.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 111.\r\nBreakpoint $decimal at $hex: file.*$srcfile, line 110.\r\nMultiple breakpoints were set.\r\nUse the .delete. command to delete unwanted breakpoints.\r\n$gdb_prompt $" {
+                       pass "set bp on all overload1arg()" }
+               -re ".*$gdb_prompt $" {
+                       fail "set bp on all overload1arg() wrong bp reply" }
+               timeout           {
+                       fail "(timeout)set bp on all overload1arg() wrong bp reply" }
+             }
+         }
+    -re ".*$gdb_prompt $" { fail "set bp on all overload1arg()(wrong menu)" }
+    timeout           { fail "(timeout)set bp on all overload1arg()(wrong menu)" }
+  }
+
+
+
+gdb_test "info break" \
+    "Num Type\[\t \]+Disp Enb Address\[\t \]+What.*
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(double\\) at.*$srcfile:121\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(float\\) at.*$srcfile:120\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned long\\) at.*$srcfile:119\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(long\\) at.*$srcfile:118\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned int\\) at.*$srcfile:117\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(int\\) at.*$srcfile:116\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned short\\) at.*$srcfile:115\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(short\\) at.*$srcfile:114\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(unsigned char\\) at.*$srcfile:113\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(signed char\\) at.*$srcfile:112\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(char\\) at.*$srcfile:111\r
+\[0-9\]+\[\t \]+breakpoint     keep y\[\t \]+$hex in foo::overload1arg\\(void\\) at.*$srcfile:110" \
+    "breakpoint info"
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 25, foo::overload1arg \\(this=$hex\\) at.*$srcfile:110\r\n110\[\t \]+int foo::overload1arg \\(void\\)\[\t \]+\{  return 1; \}\r\n$gdb_prompt $" {
+            pass "continue to bp overloaded : void"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : void"  }
+        timeout { fail "(timeout) continue to bp overloaded : void"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 24, foo::overload1arg \\(this=$hex, arg=2 \\'\\\\002\\'\\) at.*$srcfile:111\r\n111\[\t \]+int foo::overload1arg \\(char arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : char"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : char"  }
+        timeout { fail "(timeout) continue to bp overloaded : char"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 23, foo::overload1arg \\(this=$hex, arg=3 \\'\\\\003\\'\\) at.*$srcfile:112\r\n112\[\t \]+int foo::overload1arg \\(signed char arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : signed char"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : signed char"  }
+        timeout { fail "(timeout) continue to bp overloaded : signed char"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 22, foo::overload1arg \\(this=$hex, arg=4 \\'\\\\004\\'\\) at.*$srcfile:113\r\n113\[\t \]+int foo::overload1arg \\(unsigned char arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : unsigned char"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : unsigned char"  }
+        timeout { fail "(timeout) continue to bp overloaded : unsigned char"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 21, foo::overload1arg \\(this=$hex, arg=5\\) at.*$srcfile:114\r\n114\[\t \]+int foo::overload1arg \\(short arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : short"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : short"  }
+        timeout { fail "(timeout) continue to bp overloaded : short"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 20, foo::overload1arg \\(this=$hex, arg=6\\) at.*$srcfile:115\r\n115\[\t \]+int foo::overload1arg \\(unsigned short arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : unsigned short"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : unsigned short"  }
+        timeout { fail "(timeout) continue to bp overloaded : unsigned short"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 19, foo::overload1arg \\(this=$hex, arg=7\\) at.*$srcfile:116\r\n116\[\t \]+int foo::overload1arg \\(int arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : int"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : int"  }
+        timeout { fail "(timeout) continue to bp overloaded : int"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 18, foo::overload1arg \\(this=$hex, arg=8\\) at.*$srcfile:117\r\n117\[\t \]+int foo::overload1arg \\(unsigned int arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : unsigned int"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : unsigned int"  }
+        timeout { fail "(timeout) continue to bp overloaded : unsigned int"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 17, foo::overload1arg \\(this=$hex, arg=9\\) at.*$srcfile:118\r\n118\[\t \]+int foo::overload1arg \\(long arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : long"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : long"  }
+        timeout { fail "(timeout) continue to bp overloaded : long"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 16, foo::overload1arg \\(this=$hex, arg=10\\) at.*$srcfile:119\r\n119\[\t \]+int foo::overload1arg \\(unsigned long arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : unsigned long"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : unsigned long"  }
+        timeout { fail "(timeout) continue to bp overloaded : unsigned long"  }
+    }
+
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 15, foo::overload1arg \\(this=$hex, arg=100\\) at.*$srcfile:120\r\n120\[\t \]+int foo::overload1arg \\(float arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : float"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : float"  }
+        timeout { fail "(timeout) continue to bp overloaded : float"  }
+    }
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nBreakpoint 14, foo::overload1arg \\(this=$hex, arg=200\\) at.*$srcfile:121\r\n121\[\t \]+int foo::overload1arg \\(double arg\\).*$gdb_prompt $" {
+            pass "continue to bp overloaded : double"
+        }
+        -re "$gdb_prompt $" { fail "continue to bp overloaded : double"  }
+        timeout { fail "(timeout) continue to bp overloaded : double"  }
+    }
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Continuing.\r\n\r\nProgram exited normally.\r\n$gdb_prompt $" {
+            pass "finish program"
+        }
+        -re "$gdb_prompt $" { fail "finish program"  }
+        timeout { fail "(timeout) finish program"  }
+    }
diff --git a/gdb/testsuite/gdb.c++/ref-types.cc b/gdb/testsuite/gdb.c++/ref-types.cc
new file mode 100644
index 0000000..8ee5c40
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ref-types.cc
@@ -0,0 +1,30 @@
+void marker1 (void)
+{
+    
+}
+
+
+
+int main(void)
+{
+    short s;
+    short &rs = s;
+    short *ps;
+    short *&rps = ps;
+    short as[4];
+    short (&ras)[4] = as;
+    s = -1;
+    ps = &s;
+    as[0] = 0;
+    as[1] = 1;
+    as[2] = 2;
+    as[3] = 3;
+
+   #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+    marker1();
+ 
+    return 0;
+}
diff --git a/gdb/testsuite/gdb.c++/ref-types.exp b/gdb/testsuite/gdb.c++/ref-types.exp
new file mode 100644
index 0000000..7f25590
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ref-types.exp
@@ -0,0 +1,276 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for reference types
+# with short type variables.
+# 
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "ref-types"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+
+proc gdb_start_again {} {
+global srcdir
+global subdir
+global binfile
+global gdb_prompt
+global decimal
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+source ${binfile}.ci
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+}
+
+
+
+
+
+send_gdb "print s\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.*$gdb_prompt $" {
+        pass "print value of s"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of s" }
+    timeout           { fail "(timeout) print value of s" }
+  }
+
+
+send_gdb "ptype s\n"
+gdb_expect {
+    -re "type = short.*$gdb_prompt $"  { pass "ptype s" }
+    -re ".*$gdb_prompt $"   {  fail "ptype s" }
+    timeout             { fail "(timeout) ptype s" }
+}
+
+
+send_gdb "print *ps\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.*$gdb_prompt $" {
+        pass "print value of ps"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ps" }
+    timeout           { fail "(timeout) print value of ps" }
+  }
+
+
+send_gdb "ptype ps\n"
+gdb_expect {
+    -re "type = short \*.*$gdb_prompt $"  { pass "ptype ps" }
+    -re ".*$gdb_prompt $"   {  fail "ptype ps" }
+    timeout             { fail "(timeout) ptype ps" }
+}
+
+send_gdb "print as\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of as\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of as\[0\]" }
+    timeout           { fail "(timeout) print value of as\[0\]" }
+  }
+
+
+send_gdb "ptype as\n"
+gdb_expect {
+    -re "type = short \\\[4\\\].*$gdb_prompt $"  { pass "ptype as" }
+    -re ".*$gdb_prompt $"   {  fail "ptype as" }
+    timeout             { fail "(timeout) ptype as" }
+}
+
+send_gdb "print as\[1\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of as\[1\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of as\[1\]" }
+    timeout           { fail "(timeout) print value of as\[1\]" }
+  }
+
+send_gdb "print as\[2\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of as\[2\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of as\[2\]" }
+    timeout           { fail "(timeout) print value of as\[2\]" }
+  }
+
+send_gdb "print as\[3\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of as\[3\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of as\[3\]" }
+    timeout           { fail "(timeout) print value of as\[3\]" }
+  }
+
+send_gdb "print rs\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(short &\\) @$hex: -1.*$gdb_prompt $" {
+        pass "print value of rs"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rs" }
+    timeout           { fail "(timeout) print value of rs" }
+    eof { fail "print rs ($GDB dumped core) (FIXME)" ; gdb_start_again ; }
+
+  }
+
+send_gdb "ptype rs\n"
+gdb_expect {
+    -re "type = short &.*$gdb_prompt $"  { pass "ptype rs" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rs" }
+    timeout             { fail "(timeout) ptype rs" }
+}
+
+
+send_gdb "print *rps\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.*$gdb_prompt $" {
+        pass "print value of *rps"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of *rps" }
+    timeout           { fail "(timeout) print value of *rps" }
+  }
+
+
+send_gdb "ptype rps\n"
+gdb_expect {
+    -re "type = short \\*&.*$gdb_prompt $"  { pass "ptype rps" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rps" }
+    timeout             { fail "(timeout) ptype rps" }
+}
+
+
+
+send_gdb "print ras\[0\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 0.*$gdb_prompt $" {
+        pass "print value of ras\[0\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ras\[0\]" }
+    timeout           { fail "(timeout) print value of ras\[0\]" }
+  }
+
+
+send_gdb "ptype ras\n"
+gdb_expect {
+    -re "type = short \\\(&\\\)\\\[4\\\].*$gdb_prompt $"  { pass "ptype ras" }
+    -re ".*$gdb_prompt $"   {  fail "ptype ras" }
+    timeout             { fail "(timeout) ptype ras" }
+}
+
+send_gdb "print ras\[1\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.*$gdb_prompt $" {
+        pass "print value of ras\[1\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ras\[1\]" }
+    timeout           { fail "(timeout) print value of ras\[1\]" }
+  }
+
+send_gdb "print ras\[2\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 2.*$gdb_prompt $" {
+        pass "print value of ras\[2\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ras\[2\]" }
+    timeout           { fail "(timeout) print value of ras\[2\]" }
+  }
+
+send_gdb "print ras\[3\]\n"
+gdb_expect {
+    -re ".\[0-9\]* = 3.*$gdb_prompt $" {
+        pass "print value of ras\[3\]"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of ras\[3\]" }
+    timeout           { fail "(timeout) print value of ras\[3\]" }
+  }
diff --git a/gdb/testsuite/gdb.c++/ref-types2.cc b/gdb/testsuite/gdb.c++/ref-types2.cc
new file mode 100644
index 0000000..62c982d
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ref-types2.cc
@@ -0,0 +1,47 @@
+int f()
+{
+    int f1;
+    f1 = 1;
+    return f1;
+}
+
+int main(void)
+{
+    char C;
+    unsigned char UC;
+    short S;
+    unsigned short US;
+    int I;
+    unsigned int UI;
+    long L;
+    unsigned long UL;
+    float F;
+    double D;
+    char &rC = C;
+    unsigned char &rUC = UC;
+    short &rS = S;
+    unsigned short &rUS = US;
+    int &rI = I;
+    unsigned int &rUI = UI;
+    long &rL = L;
+    unsigned long &rUL = UL;
+    float &rF = F;
+    double &rD = D;
+    C = 'A';
+    UC = 21;
+    S = -14;
+    US = 7;
+    I = 102;
+    UI = 1002;
+    L = -234;
+    UL = 234;
+    F = 1.25E10;
+    D = -1.375E-123;
+    I = f();
+    #ifdef usestubs
+       set_debug_traps();
+       breakpoint();
+    #endif
+    return 0;
+    
+}
diff --git a/gdb/testsuite/gdb.c++/ref-types2.exp b/gdb/testsuite/gdb.c++/ref-types2.exp
new file mode 100644
index 0000000..6754147
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/ref-types2.exp
@@ -0,0 +1,450 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (ezannoni@cygnus.com)
+
+# This file is part of the gdb testsuite
+#
+# tests for reference types
+# with elementary type variables.
+# 
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "ref-types2"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break f\n" ; gdb_expect -re ".*$gdb_prompt $"
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* f \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" {}
+                timeout { fail "up from f" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to f"  }
+        timeout { fail "(timeout) continue to f"  }
+    }
+
+
+send_gdb "print C\n"
+gdb_expect {
+    -re ".\[0-9\]* = 65 \'A\'.*$gdb_prompt $" {
+        pass "print value of C"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of C" }
+    timeout           { fail "(timeout) print value of C" }
+  }
+
+
+send_gdb "ptype C\n"
+gdb_expect {
+    -re "type = char.*$gdb_prompt $"  { pass "ptype C" }
+    -re ".*$gdb_prompt $"   {  fail "ptype C" }
+    timeout             { fail "(timeout) ptype C" }
+}
+
+
+send_gdb "print UC\n"
+gdb_expect {
+    -re ".\[0-9\]* = 21 '\.025'\.*$gdb_prompt $" {
+        pass "print value of UC"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of UC" }
+    timeout           { fail "(timeout) print value of UC" }
+  }
+
+
+send_gdb "ptype UC\n"
+gdb_expect {
+    -re "type = unsigned char.*$gdb_prompt $"  { pass "ptype UC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype UC" }
+    timeout             { fail "(timeout) ptype UC" }
+}
+
+
+send_gdb "print S\n"
+gdb_expect {
+    -re ".\[0-9\]* = -14.*$gdb_prompt $" {
+        pass "print value of S"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of S" }
+    timeout           { fail "(timeout) print value of S" }
+  }
+
+
+send_gdb "ptype S\n"
+gdb_expect {
+    -re "type = short.*$gdb_prompt $"  { pass "ptype S" }
+    -re ".*$gdb_prompt $"   {  fail "ptype S" }
+    timeout             { fail "(timeout) ptype S" }
+}
+
+
+send_gdb "print US\n"
+gdb_expect {
+    -re ".\[0-9\]* = 7.*$gdb_prompt $" {
+        pass "print value of US"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of US" }
+    timeout           { fail "(timeout) print value of US" }
+  }
+
+
+send_gdb "ptype US\n"
+gdb_expect {
+    -re "type = unsigned short.*$gdb_prompt $"  { pass "ptype US" }
+    -re ".*$gdb_prompt $"   {  fail "ptype US" }
+    timeout             { fail "(timeout) ptype US" }
+}
+
+
+send_gdb "print I\n"
+gdb_expect {
+    -re ".\[0-9\]* = 102.*$gdb_prompt $" {
+        pass "print value of I"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of I" }
+    timeout           { fail "(timeout) print value of I" }
+  }
+
+
+send_gdb "ptype I\n"
+gdb_expect {
+    -re "type = int.*$gdb_prompt $"  { pass "ptype I" }
+    -re ".*$gdb_prompt $"   {  fail "ptype I" }
+    timeout             { fail "(timeout) ptype I" }
+}
+
+
+send_gdb "print UI\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1002.*$gdb_prompt $" {
+        pass "print value of UI"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of UI" }
+    timeout           { fail "(timeout) print value of UI" }
+  }
+
+
+send_gdb "ptype UI\n"
+gdb_expect {
+    -re "type = unsigned int.*$gdb_prompt $"  { pass "ptype UI" }
+    -re ".*$gdb_prompt $"   {  fail "ptype UI" }
+    timeout             { fail "(timeout) ptype UI" }
+}
+
+
+send_gdb "print L\n"
+gdb_expect {
+    -re ".\[0-9\]* = -234.*$gdb_prompt $" {
+        pass "print value of L"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of L" }
+    timeout           { fail "(timeout) print value of L" }
+  }
+
+
+send_gdb "ptype L\n"
+gdb_expect {
+    -re "type = long.*$gdb_prompt $"  { pass "ptype L" }
+    -re ".*$gdb_prompt $"   {  fail "ptype L" }
+    timeout             { fail "(timeout) ptype L" }
+}
+
+
+send_gdb "print UL\n"
+gdb_expect {
+    -re ".\[0-9\]* = 234.*$gdb_prompt $" {
+        pass "print value of UL"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of UL" }
+    timeout           { fail "(timeout) print value of UL" }
+  }
+
+
+send_gdb "ptype UL\n"
+gdb_expect {
+    -re "type = unsigned long.*$gdb_prompt $"  { pass "ptype UL" }
+    -re ".*$gdb_prompt $"   {  fail "ptype UL" }
+    timeout             { fail "(timeout) ptype UL" }
+}
+
+
+send_gdb "print F\n"
+gdb_expect {
+    -re ".\[0-9\]* = 1.2\[0-9\]*e\\+10.*$gdb_prompt $" {
+        pass "print value of F"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of F" }
+    timeout           { fail "(timeout) print value of F" }
+  }
+
+
+
+send_gdb "ptype F\n"
+gdb_expect {
+    -re "type = float.*$gdb_prompt $"  { pass "ptype F" }
+    -re ".*$gdb_prompt $"   {  fail "ptype F" }
+    timeout             { fail "(timeout) ptype F" }
+}
+
+
+send_gdb "print D\n"
+gdb_expect {
+    -re ".\[0-9\]* = -1.375e-123.*$gdb_prompt $" {
+        pass "print value of D"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of D" }
+    timeout           { fail "(timeout) print value of D" }
+  }
+
+
+send_gdb "ptype D\n"
+gdb_expect {
+    -re "type = double.*$gdb_prompt $"  { pass "ptype D" }
+    -re ".*$gdb_prompt $"   {  fail "ptype D" }
+    timeout             { fail "(timeout) ptype D" }
+}
+
+
+
+#
+# test reference types
+#
+
+
+
+
+send_gdb "ptype rC\n"
+gdb_expect {
+    -re "type = char &.*$gdb_prompt $"  { pass "ptype rC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rC" }
+    timeout             { fail "(timeout) ptype rC" }
+}
+
+
+
+
+send_gdb "ptype rUC\n"
+gdb_expect {
+    -re "type = unsigned char &.*$gdb_prompt $"  { pass "ptype rUC" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rUC" }
+    timeout             { fail "(timeout) ptype rUC" }
+}
+
+
+
+send_gdb "ptype rS\n"
+gdb_expect {
+    -re "type = short &.*$gdb_prompt $"  { pass "ptype rS" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rS" }
+    timeout             { fail "(timeout) ptype rS" }
+}
+
+
+
+send_gdb "ptype rUS\n"
+gdb_expect {
+    -re "type = unsigned short &.*$gdb_prompt $"  { pass "ptype rUS" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rUS" }
+    timeout             { fail "(timeout) ptype rUS" }
+}
+
+
+send_gdb "ptype rI\n"
+gdb_expect {
+    -re "type = int &.*$gdb_prompt $"  { pass "ptype rI" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rI" }
+    timeout             { fail "(timeout) ptype rI" }
+}
+
+
+
+send_gdb "ptype rUI\n"
+gdb_expect {
+    -re "type = unsigned int &.*$gdb_prompt $"  { pass "ptype rUI" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rUI" }
+    timeout             { fail "(timeout) ptype rUI" }
+}
+
+
+
+send_gdb "ptype rL\n"
+gdb_expect {
+    -re "type = long &.*$gdb_prompt $"  { pass "ptype rL" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rL" }
+    timeout             { fail "(timeout) ptype rL" }
+}
+
+
+send_gdb "ptype rUL\n"
+gdb_expect {
+    -re "type = unsigned long &.*$gdb_prompt $"  { pass "ptype rUL" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rUL" }
+    timeout             { fail "(timeout) ptype rUL" }
+}
+
+
+send_gdb "ptype rF\n"
+gdb_expect {
+    -re "type = float &.*$gdb_prompt $"  { pass "ptype rF" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rF" }
+    timeout             { fail "(timeout) ptype rF" }
+}
+
+
+send_gdb "ptype rD\n"
+gdb_expect {
+    -re "type = double &.*$gdb_prompt $"  { pass "ptype rD" }
+    -re ".*$gdb_prompt $"   {  fail "ptype rD" }
+    timeout             { fail "(timeout) ptype rD" }
+}
+
+
+send_gdb "print rC\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(char &\\) @$hex: 65 \'A\'.*$gdb_prompt $" {
+        pass "print value of rC"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rC" }
+    timeout           { fail "(timeout) print value of rC" }
+  }
+
+
+send_gdb "print rUC\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(unsigned char &\\) @$hex: 21 \'.025\'.*$gdb_prompt $" {
+        pass "print value of rUC"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rUC" }
+    timeout           { fail "(timeout) print value of rUC" }
+  }
+
+
+send_gdb "print rS\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(short &\\) @$hex: -14.*$gdb_prompt $" {
+        pass "print value of rS"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rS" }
+    timeout           { fail "(timeout) print value of rS" }
+  }
+
+
+send_gdb "print rUS\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(unsigned short &\\) @$hex: 7.*$gdb_prompt $" {
+        pass "print value of rUS"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rUS" }
+    timeout           { fail "(timeout) print value of rUS" }
+  }
+
+
+send_gdb "print rI\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(int &\\) @$hex: 102.*$gdb_prompt $" {
+        pass "print value of rI"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rI" }
+    timeout           { fail "(timeout) print value of rI" }
+  }
+
+
+send_gdb "print rUI\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(unsigned int &\\) @$hex: 1002.*$gdb_prompt $" {
+        pass "print value of UI"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rUI" }
+    timeout           { fail "(timeout) print value of rUI" }
+  }
+
+
+send_gdb "print rL\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(long &\\) @$hex: -234.*$gdb_prompt $" {
+        pass "print value of rL"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rL" }
+    timeout           { fail "(timeout) print value of rL" }
+  }
+
+
+
+send_gdb "print rUL\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(unsigned long &\\) @$hex: 234.*$gdb_prompt $" {
+        pass "print value of rUL"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rUL" }
+    timeout           { fail "(timeout) print value of rUL" }
+  }
+
+
+send_gdb "print rF\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(float &\\) @$hex: 1.2\[0-9\]*e\\+10.*$gdb_prompt $" {
+        pass "print value of rF"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rF" }
+    timeout           { fail "(timeout) print value of rF" }
+  }
+
+
+send_gdb "print rD\n"
+gdb_expect {
+    -re ".\[0-9\]* = \\(double &\\) @$hex: -1.375e-123.*$gdb_prompt $" {
+        pass "print value of rD"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of rD" }
+    timeout           { fail "(timeout) print value of rD" }
+  }
+
diff --git a/gdb/testsuite/gdb.c++/templates.cc b/gdb/testsuite/gdb.c++/templates.cc
new file mode 100644
index 0000000..25241dc
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/templates.cc
@@ -0,0 +1,785 @@
+/* This test code is from Wendell Baker (wbaker@comet.berkeley.edu) */
+
+#include <stddef.h>
+
+int a_i;
+char a_c;
+double a_d;
+
+typedef void *Pix;
+
+int
+f(int i)
+{ return 0; }
+
+int
+f(int i, char c)
+{ return 0; }
+
+int
+f(int i, char c, double d)
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs)
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs, void (*fig)(int, char))
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs, void (*fig)(char, int))
+{ return 0; }
+
+class R {
+public:
+    int i;
+};
+class S {
+public:
+    int i;
+};
+class T {
+public:
+    int i;
+};
+
+char g(char, const char, volatile char)
+{ return 'c'; }
+char g(R, char&, const char&, volatile char&)
+{ return 'c'; }
+char g(char*, const char*, volatile char*)
+{ return 'c'; }
+char g(S, char*&, const char*&, volatile char*&)
+{ return 'c'; }
+
+signed char g(T,signed char, const signed char, volatile signed char)
+{ return 'c'; }
+signed char g(T, R, signed char&, const signed char&, volatile signed char&)
+{ return 'c'; }
+signed char g(T, signed char*, const signed char*, volatile signed char*)
+{ return 'c'; }
+signed char g(T, S, signed char*&, const signed char*&, volatile signed char*&)
+{ return 'c'; }
+
+unsigned char g(unsigned char, const unsigned char, volatile unsigned char)
+{ return 'c'; }
+unsigned char g(R, unsigned char&, const unsigned char&, volatile unsigned char&)
+{ return 'c'; }
+unsigned char g(unsigned char*, const unsigned char*, volatile unsigned char*)
+{ return 'c'; }
+unsigned char g(S, unsigned char*&, const unsigned char*&, volatile unsigned char*&)
+{ return 'c'; }
+
+short g(short, const short, volatile short)
+{ return 0; }
+short g(R, short&, const short&, volatile short&)
+{ return 0; }
+short g(short*, const short*, volatile short*)
+{ return 0; }
+short g(S, short*&, const short*&, volatile short*&)
+{ return 0; }
+
+signed short g(T, signed short, const signed short, volatile signed short)
+{ return 0; }
+signed short g(T, R, signed short&, const signed short&, volatile signed short&)
+{ return 0; }
+signed short g(T, signed short*, const signed short*, volatile signed short*)
+{ return 0; }
+signed short g(T, S, double, signed short*&, const signed short*&, volatile signed short*&)
+{ return 0; }
+
+unsigned short g(unsigned short, const unsigned short, volatile unsigned short)
+{ return 0; }
+unsigned short g(R, unsigned short&, const unsigned short&, volatile unsigned short&)
+{ return 0; }
+unsigned short g(unsigned short*, const unsigned short*, volatile unsigned short*)
+{ return 0; }
+unsigned short g(S, unsigned short*&, const unsigned short*&, volatile unsigned short*&)
+{ return 0; }
+
+int g(int, const int, volatile int)
+{ return 0; }
+int g(R, int&, const int&, volatile int&)
+{ return 0; }
+int g(int*, const int*, volatile int*)
+{ return 0; }
+int g(S, int*&, const int*&, volatile int*&)
+{ return 0; }
+
+signed int g(T, signed int, const signed int, volatile signed int)
+{ return 0; }
+signed int g(T, R, signed int&, const signed int&, volatile signed int&)
+{ return 0; }
+signed int g(T, signed int*, const signed int*, volatile signed int*)
+{ return 0; }
+signed int g(T, S, signed int*&, const signed int*&, volatile signed int*&)
+{ return 0; }
+
+unsigned int g(unsigned int, const unsigned int, volatile unsigned int)
+{ return 0; }
+unsigned int g(R, unsigned int&, const unsigned int&, volatile unsigned int&)
+{ return 0; }
+unsigned int g(unsigned int*, const unsigned int*, volatile unsigned int*)
+{ return 0; }
+unsigned int g(S, unsigned int*&, const unsigned int*&, volatile unsigned int*&)
+{ return 0; }
+
+long g(long, const long, volatile long)
+{ return 0; }
+long g(R, long&, const long&, volatile long&)
+{ return 0; }
+long g(long*, const long*, volatile long*)
+{ return 0; }
+long g(S, long*&, const long*&, volatile long*&)
+{ return 0; }
+
+signed long g(T, signed long, const signed long, volatile signed long)
+{ return 0; }
+signed long g(T, R, signed long&, const signed long&, volatile signed long&)
+{ return 0; }
+signed long g(T, signed long*, const signed long*, volatile signed long*)
+{ return 0; }
+signed long g(T, S, signed long*&, const signed long*&, volatile signed long*&)
+{ return 0; }
+
+unsigned long g(unsigned long, const unsigned long, volatile unsigned long)
+{ return 0; }
+unsigned long g(S, unsigned long&, const unsigned long&, volatile unsigned long&)
+{ return 0; }
+unsigned long g(unsigned long*, const unsigned long*, volatile unsigned long*)
+{ return 0; }
+unsigned long g(S, unsigned long*&, const unsigned long*&, volatile unsigned long*&)
+{ return 0; }
+
+#ifdef __GNUC__
+long long g(long long, const long long, volatile long long)
+{ return 0; }
+long long g(S, long long&, const long long&, volatile long long&)
+{ return 0; }
+long long g(long long*, const long long*, volatile long long*)
+{ return 0; }
+long long g(R, long long*&, const long long*&, volatile long long*&)
+{ return 0; }
+
+signed long long g(T, signed long long, const signed long long, volatile signed long long)
+{ return 0; }
+signed long long g(T, R, signed long long&, const signed long long&, volatile signed long long&)
+{ return 0; }
+signed long long g(T, signed long long*, const signed long long*, volatile signed long long*)
+{ return 0; }
+signed long long g(T, S, signed long long*&, const signed long long*&, volatile signed long long*&)
+{ return 0; }
+
+unsigned long long g(unsigned long long, const unsigned long long, volatile unsigned long long)
+{ return 0; }
+unsigned long long g(R, unsigned long long*, const unsigned long long*, volatile unsigned long long*)
+{ return 0; }
+unsigned long long g(unsigned long long&, const unsigned long long&, volatile unsigned long long&)
+{ return 0; }
+unsigned long long g(S, unsigned long long*&, const unsigned long long*&, volatile unsigned long long*&)
+{ return 0; }
+#endif
+
+float g(float, const float, volatile float)
+{ return 0; }
+float g(char, float&, const float&, volatile float&)
+{ return 0; }
+float g(float*, const float*, volatile float*)
+{ return 0; }
+float g(char, float*&, const float*&, volatile float*&)
+{ return 0; }
+
+double g(double, const double, volatile double)
+{ return 0; }
+double g(char, double&, const double&, volatile double&)
+{ return 0; }
+double g(double*, const double*, volatile double*)
+{ return 0; }
+double g(char, double*&, const double*&, volatile double*&)
+{ return 0; }
+
+#ifdef __GNUC__
+long double g(long double, const long double, volatile long double)
+{ return 0; }
+long double g(char, long double&, const long double&, volatile long double&)
+{ return 0; }
+long double g(long double*, const long double*, volatile long double*)
+{ return 0; }
+long double g(char, long double*&, const long double*&, volatile long double*&)
+{ return 0; }
+#endif
+
+class c {
+public:
+    c(int) {};
+    int i;
+};
+
+class c g(c, const c, volatile c)
+{ return 0; }
+c g(char, c&, const c&, volatile c&)
+{ return 0; }
+c g(c*, const c*, volatile c*)
+{ return 0; }
+c g(char, c*&, const c*&, volatile c*&)
+{ return 0; }
+
+/*
+void h(char = 'a')
+{ }
+void h(char, signed char = 'a')
+{ }
+void h(unsigned char = 'a')
+{ }
+*/
+/*
+void h(char = (char)'a')
+{ }
+void h(char, signed char = (signed char)'a')
+{ }
+void h(unsigned char = (unsigned char)'a')
+{ }
+
+
+void h(short = (short)43)
+{ }
+void h(char, signed short = (signed short)43)
+{ }
+void h(unsigned short = (unsigned short)43)
+{ }
+
+void h(int = (int)43)
+{ }
+void h(char, signed int = (signed int)43)
+{ }
+void h(unsigned int = (unsigned int)43)
+{ }
+
+
+void h(long = (long)43)
+{ }
+void h(char, signed long = (signed long)43)
+{ }
+void h(unsigned long = (unsigned long)43)
+{ }
+
+#ifdef __GNUC__
+void h(long long = 43)
+{ }
+void h(char, signed long long = 43)
+{ }
+void h(unsigned long long = 43)
+{ }
+#endif
+
+void h(float = 4.3e-10)
+{ }
+void h(double = 4.3)
+{ }
+#ifdef __GNUC__
+void h(long double = 4.33e33)
+{ }
+#endif
+*/
+void printf(const char *format, ... )
+{
+    // elipsis
+}
+
+class T1 {
+public:
+    static void* operator new(size_t);
+    static void operator delete(void *pointer);
+
+    void operator=(const T1&);
+    T1& operator=(int);
+
+    int operator==(int) const;
+    int operator==(const T1&) const;
+    int operator!=(int) const;
+    int operator!=(const T1&) const;
+
+    int operator<=(int) const;
+    int operator<=(const T1&) const;
+    int operator<(int) const;
+    int operator<(const T1&) const;
+    int operator>=(int) const;
+    int operator>=(const T1&) const;
+    int operator>(int) const;
+    int operator>(const T1&) const;
+
+    void operator+(int) const;
+    T1& operator+(const T1&) const;
+    void operator+=(int) const;
+    T1& operator+=(const T1&) const;
+
+    T1& operator++() const;
+
+    void operator-(int) const;
+    T1& operator-(const T1&) const;
+    void operator-=(int) const;
+    T1& operator-=(const T1&) const;
+
+    T1& operator--() const;
+
+    void operator*(int) const;
+    T1& operator*(const T1&) const;
+    void operator*=(int) const;
+    T1& operator*=(const T1&) const;
+
+    void operator/(int) const;
+    T1& operator/(const T1&) const;
+    void operator/=(int) const;
+    T1& operator/=(const T1&) const;
+
+    void operator%(int) const;
+    T1& operator%(const T1&) const;
+    void operator%=(int) const;
+    T1& operator%=(const T1&) const;
+
+    void operator&&(int) const;
+    T1& operator&&(const T1&) const;
+
+    void operator||(int) const;
+    T1& operator||(const T1&) const;
+
+    void operator&(int) const;
+    T1& operator&(const T1&) const;
+    void operator&=(int) const;
+    T1& operator&=(const T1&) const;
+
+    void operator|(int) const;
+    T1& operator|(const T1&) const;
+    void operator|=(int) const;
+    T1& operator|=(const T1&) const;
+
+    void operator^(int) const;
+    T1& operator^(const T1&) const;
+    void operator^=(int) const;
+    T1& operator^=(const T1&) const;
+
+    T1& operator!() const;
+    T1& operator~() const;
+};
+
+void* 
+T1::operator new(size_t)
+{ return 0; }
+
+void
+T1::operator delete(void *pointer)
+{ }
+
+class T2 {
+public:
+    T2(int i): integer(i)
+	{ }
+    int integer;
+};
+
+int operator==(const T2&, const T2&)
+{ return 0; }
+int operator==(const T2&, char)
+{ return 0; }
+int operator!=(const T2&, const T2&)
+{ return 0; }
+int operator!=(const T2&, char)
+{ return 0; }
+
+int operator<=(const T2&, const T2&)
+{ return 0; }
+int operator<=(const T2&, char)
+{ return 0; }
+int operator<(const T2&, const T2&)
+{ return 0; }
+int operator<(const T2&, char)
+{ return 0; }
+int operator>=(const T2&, const T2&)
+{ return 0; }
+int operator>=(const T2&, char)
+{ return 0; }
+int operator>(const T2&, const T2&)
+{ return 0; }
+int operator>(const T2&, char)
+{ return 0; }
+
+T2 operator+(const T2 t, int i)
+{ return t.integer + i; }
+T2 operator+(const T2 a, const T2& b)
+{ return a.integer + b.integer; }
+T2& operator+=(T2& t, int i)
+{ t.integer += i; return t; }
+T2& operator+=(T2& a, const T2& b)
+{ a.integer += b.integer; return a; }
+
+T2 operator-(const T2 t, int i)
+{ return t.integer - i; }
+T2 operator-(const T2 a, const T2& b)
+{ return a.integer - b.integer; }
+T2& operator-=(T2& t, int i)
+{ t.integer -= i; return t; }
+T2& operator-=(T2& a, const T2& b)
+{ a.integer -= b.integer; return a; }
+
+T2 operator*(const T2 t, int i)
+{ return t.integer * i; }
+T2 operator*(const T2 a, const T2& b)
+{ return a.integer * b.integer; }
+T2& operator*=(T2& t, int i)
+{ t.integer *= i; return t; }
+T2& operator*=(T2& a, const T2& b)
+{ a.integer *= b.integer; return a; }
+
+T2 operator/(const T2 t, int i)
+{ return t.integer / i; }
+T2 operator/(const T2 a, const T2& b)
+{ return a.integer / b.integer; }
+T2& operator/=(T2& t, int i)
+{ t.integer /= i; return t; }
+T2& operator/=(T2& a, const T2& b)
+{ a.integer /= b.integer; return a; }
+
+T2 operator%(const T2 t, int i)
+{ return t.integer % i; }
+T2 operator%(const T2 a, const T2& b)
+{ return a.integer % b.integer; }
+T2& operator%=(T2& t, int i)
+{ t.integer %= i; return t; }
+T2& operator%=(T2& a, const T2& b)
+{ a.integer %= b.integer; return a; }
+
+template<class T>
+class T5 {
+public:
+    T5(int);
+    T5(const T5<T>&);
+    ~T5();
+    static void* operator new(size_t);
+    static void operator delete(void *pointer);
+    int value();
+    
+    static T X;
+    T x;
+    int val;
+};
+
+template<class T>
+T5<T>::T5(int v)
+{ val = v; }
+
+template<class T>
+T5<T>::T5(const T5<T>&)
+{}
+
+template<class T>
+T5<T>::~T5()
+{}
+
+template<class T>
+void*
+T5<T>::operator new(size_t)
+{ return 0; }
+
+template<class T>
+void
+T5<T>::operator delete(void *pointer)
+{ }
+
+template<class T>
+int
+T5<T>::value()
+{ return val; }
+
+
+#if ! defined(__GNUC__) || defined(GCC_BUG)
+template<class T>
+T T5<T>::X;
+#endif
+
+
+
+
+T5<char> t5c(1);
+T5<int> t5i(2);
+T5<int (*)(char, void *)> t5fi1(3);
+T5<int (*)(int, double **, void *)> t5fi2(4);
+
+ 
+
+
+
+
+class x {
+public:
+    int (*manage[5])(double,
+		     void *(*malloc)(unsigned size),
+		     void (*free)(void *pointer));
+    int (*device[5])(int open(const char *, unsigned mode, unsigned perms, int extra = 0), 
+		     int *(*read)(int fd, void *place, unsigned size),
+		     int *(*write)(int fd, void *place, unsigned size),
+		     void (*close)(int fd));
+};
+T5<x> t5x(5);
+
+#if !defined(__GNUC__) || (__GNUC__ >= 2 && __GNUC_MINOR__ >= 6)
+template class T5<char>;
+template class T5<int>;
+template class T5<int (*)(char, void *)>;
+template class T5<int (*)(int, double **, void *)>;
+template class T5<x>;
+#endif
+
+class T7 {
+public:
+    static int get();
+    static void put(int);
+};
+
+int
+T7::get()
+{ return 1; }
+
+void
+T7::put(int i)
+{
+    // nothing
+}
+
+// More template kinds.  GDB 4.16 didn't handle these, but
+// Wildebeest does.  Note: Assuming HP aCC is used to compile
+// this file; with g++ or HP cfront or other compilers the
+// demangling may not get done correctly.
+
+// Ordinary template, to be instantiated with different types
+template<class T>
+class Foo {
+public:
+  int x;
+  T t;
+  T foo (int, T);
+};
+
+
+template<class T> T Foo<T>::foo (int i, T tt)
+{
+  return tt;
+}
+
+// Template with int parameter
+
+template<class T, int sz>
+class Bar {
+public:
+  int x;
+  T t;
+  T bar (int, T);
+};
+
+
+template<class T, int sz> T Bar<T, sz>::bar (int i, T tt)
+{
+  if (i < sz)
+    return tt;
+  else
+    return 0;
+}
+
+// function template with int parameter
+template<class T> int dummy (T tt, int i)
+{
+  return tt;
+}
+
+// Template with partial specializations
+template<class T1, class T2>
+class Spec {
+public:
+  int x;
+  T1 spec (T2);
+};
+
+template<class T1, class T2>
+T1 Spec<T1, T2>::spec (T2 t2)
+{
+  return 0;
+}
+
+template<class T>
+class Spec<T, T*> {
+public:
+  int x;
+  T spec (T*);
+};
+
+template<class T>
+T Spec<T, T*>::spec (T * tp)
+{
+  return *tp;
+}
+
+// Template with char parameter
+template<class T, char sz>
+class Baz {
+public:
+  int x;
+  T t;
+  T baz (int, T);
+};
+
+template<class T, char sz> T Baz<T, sz>::baz (int i, T tt)
+{
+  if (i < sz)
+    return tt;
+  else
+    return 0;
+}
+
+// Template with char * parameter
+template<class T, char * sz>
+class Qux {
+public:
+  int x;
+  T t;
+  T qux (int, T);
+};
+
+template<class T, char * sz> T Qux<T, sz>::qux (int i, T tt)
+{
+  if (sz[0] == 'q')
+    return tt;
+  else
+    return 0;
+}
+
+// Template with a function pointer parameter
+template<class T, int (*f)(int) >
+class Qux1 {
+public:
+  int x;
+  T t;
+  T qux (int, T);
+};
+
+template<class T, int (*f)(int)> T Qux1<T, f>::qux (int i, T tt)
+{
+  if (f != 0)
+    return tt;
+  else
+    return 0;
+}
+
+// Some functions to provide as arguments to template
+int gf1 (int a) {
+  return a * 2 + 13;
+}
+int gf2 (int a) {
+  return a * 2 + 26;
+}
+
+char string[3];
+
+
+// Template for nested instantiations
+
+template<class T>
+class Garply {
+public:
+  int x;
+  T t;
+  T garply (int, T);
+};
+
+template<class T> T Garply<T>::garply (int i, T tt)
+{
+  if (i > x)
+    return tt;
+  else
+    {
+      x += i;
+      return tt;
+    }
+}
+
+
+int main()
+{
+    int i;
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    i = i + 1;
+
+    // New tests added here
+
+  Foo<int> fint;
+  Foo<char> fchar;
+  Foo<volatile char *> fvpchar;
+
+  Bar<int, 33> bint;
+  Bar<int, (4 > 3)> bint2;
+
+  Baz<int, 's'> bazint;
+  Baz<char, 'a'> bazint2;
+
+  Qux<char, string> quxint2;
+  Qux<int, string> quxint;
+
+  Qux1<int, gf1> qux11;
+
+  int x = fint.foo(33, 47);
+  char c = fchar.foo(33, 'x');
+  volatile char * cp = fvpchar.foo(33, 0);
+  
+  int y = dummy<int> (400, 600);
+
+  int z = bint.bar(55, 66);
+  z += bint2.bar(55, 66);
+
+  c = bazint2.baz(4, 'y');
+  c = quxint2.qux(4, 'z');
+  
+  y = bazint.baz(4,3);
+  y = quxint.qux(4, 22);
+  y += qux11.qux(4, 22);
+
+  y *= gf1(y) - gf2(y);
+  
+  Spec<int, char> sic;
+  Spec<int, int *> siip;
+
+  sic.spec ('c');
+  siip.spec (&x);
+
+  Garply<int> f;
+  Garply<char> fc;
+  f.x = 13;
+
+  Garply<Garply<char> > nf;
+  nf.x = 31;
+  
+  x = f.garply (3, 4);
+  
+  fc = nf.garply (3, fc);
+
+  y = x + fc.x;
+  
+
+  return 0;
+    
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.c++/templates.exp b/gdb/testsuite/gdb.c++/templates.exp
new file mode 100644
index 0000000..ee25eaa
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/templates.exp
@@ -0,0 +1,202 @@
+# Copyright (C) 1992, 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "templates"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+if [get_compiler_info ${binfile} "c++"] {
+    return -1
+}
+source ${binfile}.ci
+
+# if we are on HPUX and we are not compiled with gcc, then skip these tests.
+
+if [istarget hppa*-*-hpux*] {
+    if {!$gcc_compiled} {
+	continue 
+    }
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+source ${binfile}.ci
+
+#
+#  Test printing of the types of templates.
+#
+
+proc test_ptype_of_templates {} {
+    global gdb_prompt
+    global ws
+
+    send_gdb "ptype T5<int>\n"
+    gdb_expect {
+	-re "type = class T5<int> \{${ws}public:${ws}static int X;${ws}int x;${ws}int val;${ws}T5\\<int> & operator=\\(T5<int> const &\\);${ws}T5\\(int\\);${ws}T5\\(T5<int> const &\\);${ws}~T5\\(void\\);${ws}static void \\* operator new\\(unsigned (int|long)\\);${ws}static void operator delete\\(void \\*\\);${ws}int value\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype T5<int>"
+	}
+	-re "type = class T5<int> \{${ws}public:${ws}static int X;${ws}int x;${ws}int val;((${ws}T5\\<int> & operator=\\(T5<int> const &\\);)|(${ws}T5\\(int\\);)|(${ws}T5\\(T5<int> const &\\);)|(${ws}~T5\\(void\\);)|(${ws}static void \\* operator new\\(unsigned (int|long)\\);)|(${ws}static void operator delete\\(void \\*\\);)|(${ws}int value\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype T5<int> (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype T5<int>"
+	}
+	timeout {
+	    fail "ptype T5<int> (timeout)"
+	}
+    }
+
+    send_gdb "ptype t5i\n"
+    gdb_expect {
+	-re "type = class T5<int> \{${ws}public:${ws}static int X;${ws}int x;${ws}int val;${ws}T5<int> & operator=\\(T5<int> const &\\);${ws}T5\\(int\\);${ws}T5\\(T5<int> const &\\);${ws}~T5\\(void\\);${ws}static void \\* operator new\\(unsigned (int|long)\\);${ws}static void operator delete\\(void \\*\\);${ws}int value\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype t5i"
+	}
+	-re "type = class T5<int> \{${ws}public:${ws}static int X;${ws}int x;${ws}int val;((${ws}T5<int> & operator=\\(T5<int> const &\\);)|(${ws}T5\\(int\\);)|(${ws}T5\\(T5<int> const &\\);)|(${ws}~T5\\(void\\);)|(${ws}static void \\* operator new\\(unsigned (int|long)\\);)|(${ws}static void operator delete\\(void \\*\\);)|(${ws}int value\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype t5i (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype t5i"
+	}
+	timeout {
+	    fail "ptype t5i (timeout)"
+	}
+    }
+}
+
+#
+#  Test breakpoint setting on template methods.
+#
+
+proc test_template_breakpoints {} {
+    global gdb_prompt
+    global testfile
+    global srcdir
+
+    send_gdb "break T5<int>::T5\n"
+    gdb_expect {
+	-re "0. cancel.*\[\r\n\]*.1. all.*\[\r\n\]*.2. T5<int>::T5\\(int\\) at .*\[\r\n\]*.3. T5<int>::T5\\(T5<int> const &\\) at .*\[\r\n\]*> $" {
+	    gdb_test "0" \
+		"cancelled" \
+		"constructor breakpoint (obsolete format!)"
+	}
+	-re ".0. cancel\[\r\n\]*.1. all\[\r\n\]*.2. T5<int>::T5\\(T5<int> const &\\) at .*templates.cc:.*\[\r\n\]*.3. T5<int>::T5\\(int\\) at .*templates.cc:.*\[\r\n\]*> $" {
+	    gdb_test "0" \
+		"cancelled" \
+		"constructor breakpoint"
+	}
+	-re ".*$gdb_prompt $" { fail "constructor breakpoint" }
+	default { fail "constructor breakpoint (timeout)" }
+    }
+    
+   gdb_test "break T5<int>::~T5" \
+	"Breakpoint.*at.* file .*${testfile}.cc, line.*" \
+	"destructor breakpoint"    
+    
+    gdb_test "break T5<int>::value" \
+	"Breakpoint.*at.* file .*${testfile}.cc, line.*" \
+	"value method breakpoint"
+
+    delete_breakpoints
+}
+
+#
+#  Test calling of template methods.
+#
+
+proc test_template_calls {} {
+    global gdb_prompt
+
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "This target can not call functions"
+	return
+    }
+
+    send_gdb "print t5i.value()\n"
+    gdb_expect {
+	-re ".* = 2\[\r\n\]*$gdb_prompt $" { pass "print t5i.value()" }
+	-re "Cannot invoke functions on this machine.*$gdb_prompt $" {
+	    fail "print t5i.value()"
+	}
+	-re ".*$gdb_prompt $" { fail "print t5i.value()" }
+	default { fail "print t5i.value() (timeout)" }
+    }
+}
+
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+    global supports_template_debugging
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    if { !$supports_template_debugging } {
+	warning "compiler lacks debugging info for templates; tests suppressed." 0
+	return
+    }
+
+    # Get the debug format for the compiled test case.  If that
+    # format is DWARF 1 then just skip all the tests since none of
+    # them will pass.
+
+    if [ runto_main] then {
+	get_debug_format
+	if [ setup_xfail_format "DWARF 1" ] then {
+	    fail "C++ tests skipped due to limited C++ support in DWARF 1 debug format"
+	    return
+	}
+	clear_xfail "*-*-*"
+    }
+
+    test_ptype_of_templates
+    test_template_breakpoints
+
+    if [ runto_main] {
+	test_template_calls
+    }
+}
+
+do_tests
+
diff --git a/gdb/testsuite/gdb.c++/userdef.cc b/gdb/testsuite/gdb.c++/userdef.cc
new file mode 100644
index 0000000..9ad6c86
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/userdef.cc
@@ -0,0 +1,339 @@
+#include <iostream.h>
+
+void marker1()
+{
+  return;
+}
+
+class A1 {
+  int x;
+  int y;
+
+friend ostream& operator<<(ostream& outs, A1 one);
+
+public:
+
+  A1(int a, int b)
+  {
+   x=a;
+   y=b;
+  }
+
+A1 operator+=(int value);
+A1 operator+(const A1&);
+A1 operator-(const A1&);
+A1 operator%(const A1&);
+int operator==(const A1&);
+int operator!=(const A1&);
+int operator&&(const A1&);
+int operator||(const A1&);
+A1 operator<<(int);
+A1 operator>>(int);
+A1 operator|(const A1&);
+A1 operator^(const A1&);
+A1 operator&(const A1&);
+int operator<(const A1&);
+int operator<=(const A1&);
+int operator>=(const A1&);
+int operator>(const A1&);
+A1 operator*(const A1&);
+A1 operator/(const A1&);
+A1 operator=(const A1&);
+
+A1 operator~();
+A1 operator-();
+int operator!();
+A1 operator++();
+A1 operator++(int);
+A1 operator--(); 
+A1 operator--(int);
+
+};
+
+
+A1 A1::operator+(const A1& second)
+{
+ A1 sum(0,0);
+ sum.x = x + second.x;
+ sum.y = y + second.y;
+ 
+ return (sum);
+}
+
+A1 A1::operator*(const A1& second)
+{
+ A1 product(0,0);
+ product.x = this->x * second.x;
+ product.y = this->y * second.y;
+ 
+ return product;
+}
+
+A1 A1::operator-(const A1& second)
+{
+ A1 diff(0,0);
+ diff.x = x - second.x;
+ diff.y = y - second.y;
+ 
+ return diff;
+}
+
+A1 A1::operator/(const A1& second)
+{
+ A1 div(0,0);
+ div.x = x / second.x;
+ div.y = y / second.y;
+ 
+ return div;
+}
+
+A1 A1::operator%(const A1& second)
+{
+ A1 rem(0,0);
+ rem.x = x % second.x;
+ rem.y = y % second.y;
+ 
+ return rem;
+}
+
+int A1::operator==(const A1& second)
+{
+ int a = (x == second.x);
+ int b = (y == second.y);
+ 
+ return (a && b);
+}
+
+int A1::operator!=(const A1& second)
+{
+ int a = (x != second.x);
+ int b = (y != second.y);
+ 
+ return (a || b);
+}
+
+int A1::operator&&(const A1& second)
+{
+ return ( x && second.x);
+}
+
+int A1::operator||(const A1& second)
+{
+ return ( x || second.x);
+}
+
+A1 A1::operator<<(int value)
+{
+ A1 lshft(0,0);
+ lshft.x = x << value;
+ lshft.y = y << value;
+ 
+ return lshft;
+}
+
+A1 A1::operator>>(int value)
+{
+ A1 rshft(0,0);
+ rshft.x = x >> value;
+ rshft.y = y >> value;
+ 
+ return rshft;
+}
+
+A1 A1::operator|(const A1& second)
+{
+ A1 abitor(0,0);
+ abitor.x = x | second.x;
+ abitor.y = y | second.y;
+ 
+ return abitor;
+}
+
+A1 A1::operator^(const A1& second)
+{
+ A1 axor(0,0);
+ axor.x = x ^ second.x;
+ axor.y = y ^ second.y;
+ 
+ return axor;
+}
+
+A1 A1::operator&(const A1& second)
+{
+ A1 abitand(0,0);
+ abitand.x = x & second.x;
+ abitand.y = y & second.y;
+ 
+ return abitand;
+}
+
+int A1::operator<(const A1& second)
+{
+ A1 b(0,0);
+ b.x = 3;
+ return (x < second.x);
+}
+
+int A1::operator<=(const A1& second)
+{
+ return (x <= second.x);
+}
+
+int A1::operator>=(const A1& second)
+{
+ return (x >= second.x);
+}
+
+int A1::operator>(const A1& second)
+{
+ return (x > second.x);
+}
+
+int A1::operator!(void)
+{
+ return (!x);
+}
+
+A1 A1::operator-(void)
+{
+ A1 neg(0,0);
+ neg.x = -x;
+ neg.y = -y;
+
+ return (neg);
+}
+
+A1 A1::operator~(void)
+{
+ A1 acompl(0,0);
+ acompl.x = ~x;
+ acompl.y = ~y;
+
+ return (acompl);
+}
+
+A1 A1::operator++() // pre increment
+{
+ x = x +1;
+ 
+ return (*this);
+}
+
+A1 A1::operator++(int) // post increment
+{
+ y = y +1;
+ 
+ return (*this);
+}
+
+A1 A1::operator--() // pre decrement
+{
+ x = x -1;
+ 
+ return (*this);
+}
+
+A1 A1::operator--(int) // post decrement
+{
+ y = y -1;
+ 
+ return (*this);
+}
+
+
+A1 A1::operator=(const A1& second)
+{
+
+ x = second.x;
+ y = second.y;
+
+ return (*this);
+}
+
+A1 A1::operator+=(int value)
+{
+
+ x += value;
+ y += value;
+
+ return (*this);
+}
+
+ostream& operator<<(ostream& outs, A1 one)
+{
+ return (outs << endl << "x = " << one.x << endl << "y = " << one.y << endl << "-------" << endl); 
+}
+
+int main (void)
+{
+ A1 one(2,3);
+ A1 two(4,5);
+ A1 three(0,0);
+ int val;
+ 
+ marker1();
+ cout << one;
+ cout << two;
+ three = one + two;
+ cout << "+ " <<  three;
+ three = one - two;
+ cout <<  "- " << three;
+ three = one * two;
+ cout <<"* " <<  three;
+ three = one / two;
+ cout << "/ " << three;
+ three = one % two;
+ cout << "% " << three;
+ three = one | two;
+ cout << "| " <<three;
+ three = one ^ two;
+ cout << "^ " <<three;
+ three = one & two;
+ cout << "& "<< three;
+
+ val = one && two;
+ cout << "&& " << val << endl << "-----"<<endl;
+ val = one || two;
+ cout << "|| " << val << endl << "-----"<<endl;
+ val = one == two;
+ cout << " == " << val << endl << "-----"<<endl;
+ val = one != two;
+ cout << "!= " << val << endl << "-----"<<endl;
+ val = one >= two;
+ cout << ">= " << val << endl << "-----"<<endl;
+ val = one <= two;
+ cout << "<= " << val << endl << "-----"<<endl;
+ val = one < two;
+ cout << "< " << val << endl << "-----"<<endl;
+ val = one > two;
+ cout << "> " << val << endl << "-----"<<endl;
+ 
+ three = one << 2;
+ cout << "lsh " << three;
+ three = one >> 2;
+ cout << "rsh " << three;
+
+ three = one;
+ cout << " = "<< three;
+ three += 5;
+ cout << " += "<< three;
+ 
+ val = (!one);
+ cout << "! " << val << endl << "-----"<<endl;
+ three = (-one);
+ cout << "- " << three;
+ three = (~one);
+ cout << " ~" << three;
+ three++;
+ cout << "postinc " << three;
+ three--;
+ cout << "postdec " << three;
+ 
+ --three;
+ cout << "predec " << three;
+ ++three;
+ cout << "preinc " << three;
+
+ return 0;
+
+}
diff --git a/gdb/testsuite/gdb.c++/userdef.exp b/gdb/testsuite/gdb.c++/userdef.exp
new file mode 100644
index 0000000..c9bb053
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/userdef.exp
@@ -0,0 +1,317 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# written by Elena Zannoni (ezannoni@cygnus.com)
+#
+# testing overloaded operators resolution.
+# 
+# source file "userdef.cc"
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "userdef"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" { pass "up from marker1" }
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+
+    setup_xfail hppa_*_*
+send_gdb "print one+two\n"
+gdb_expect {
+    -re "FIXME.*$gdb_prompt $" {
+        pass "print value of one + two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one two" }
+    timeout           { fail "(timeout) print value of one two" }
+  }
+
+send_gdb "print one-two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one - two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one - two" }
+    timeout           { fail "(timeout) print value of one - two" }
+  }
+
+send_gdb "print one*two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one * two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one * two" }
+    timeout           { fail "(timeout) print value of one * two" }
+  }
+
+send_gdb "print one/two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one / two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one / two" }
+    timeout           { fail "(timeout) print value of one / two" }
+  }
+
+send_gdb "print one%two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one % two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one % two" }
+    timeout           { fail "(timeout) print value of one % two" }
+  }
+
+send_gdb "print one&&two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one && two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one && two" }
+    timeout           { fail "(timeout) print value of one && two" }
+  }
+
+send_gdb "print one||two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one|| two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one|| two" }
+    timeout           { fail "(timeout) print value of one|| two" }
+  }
+
+send_gdb "print one&two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one & two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one & two" }
+    timeout           { fail "(timeout) print value of one & two" }
+  }
+
+send_gdb "print one|two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one | two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one | two" }
+    timeout           { fail "(timeout) print value of one | two" }
+  }
+
+send_gdb "print one ^ two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one ^  two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one ^  two" }
+    timeout           { fail "(timeout) print value of one ^  two" }
+  }
+
+send_gdb "print one < two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one <  two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one <  two" }
+    timeout           { fail "(timeout) print value of one <  two" }
+  }
+
+send_gdb "print one <= two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one <=  two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one <=  two" }
+    timeout           { fail "(timeout) print value of one <=  two" }
+  }
+
+send_gdb "print one > two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one  > two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one >  two" }
+    timeout           { fail "(timeout) print value of one >  two" }
+  }
+
+send_gdb "print one >= two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one >=  two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one >=  two" }
+    timeout           { fail "(timeout) print value of one >=  two" }
+  }
+
+
+send_gdb "print one==two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one == two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one == two" }
+    timeout           { fail "(timeout) print value of one == two" }
+  }
+
+send_gdb "print one!=two\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one != two"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one != two" }
+    timeout           { fail "(timeout) print value of one != two" }
+  }
+
+send_gdb "print one<<31\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one<<31"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one<<31" }
+    timeout           { fail "(timeout) print value of one<<31" }
+  }
+
+send_gdb "print one>>31\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one>>31"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one>>31" }
+    timeout           { fail "(timeout) print value of one>>31" }
+  }
+
+send_gdb "print !one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of !one"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of !one" }
+    timeout           { fail "(timeout) print value of !one" }
+  }
+
+send_gdb "print ~one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of ~one"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of ~one" }
+    timeout           { fail "(timeout) print value of ~one" }
+  }
+
+send_gdb "print -one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of -one"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of -one" }
+    timeout           { fail "(timeout) print value of -one" }
+  }
+
+send_gdb "print one++\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one++"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one++" }
+    timeout           { fail "(timeout) print value of one++" }
+  }
+
+send_gdb "print ++one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of ++one>>31"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of ++one" }
+    timeout           { fail "(timeout) print value of ++one" }
+  }
+
+send_gdb "print one--\n"
+gdb_expect {
+    -re ".*.FIXME*$gdb_prompt $" {
+        pass "print value of one-->>31"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one-->>31" }
+    timeout           { fail "(timeout) print value of one-->>31" }
+  }
+
+send_gdb "print --one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of --one"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of --one" }
+    timeout           { fail "(timeout) print value of --one" }
+  }
+
+send_gdb "print one+=7\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of one+=7"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of one+=7" }
+    timeout           { fail "(timeout) print value of one+=7" }
+  }
+
+send_gdb "print two=one\n"
+gdb_expect {
+    -re ".*FIXME.*$gdb_prompt $" {
+        pass "print value of two=one"
+      }
+    -re ".*$gdb_prompt $" { xfail "print value of two=one" }
+    timeout           { fail "(timeout) print value of two=one" }
+  }
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.c++/virtfunc.cc b/gdb/testsuite/gdb.c++/virtfunc.cc
new file mode 100644
index 0000000..883d502
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/virtfunc.cc
@@ -0,0 +1,199 @@
+// Pls try the following program on virtual functions and try to do print on
+//  most of the code in main().  Almost none of them works !
+
+//
+// The inheritance structure is:
+//
+// V : VA VB
+// A : (V)
+// B : A
+// D : AD (V)
+// C : (V)
+// E : B (V) D C
+//
+
+class VA 
+{
+public:
+    int va;
+};
+
+class VB
+{
+public:
+    int vb;
+    int fvb();
+    virtual int vvb();
+};
+
+class V : public VA, public VB
+{
+public:
+    int f();
+    virtual int vv();
+    int w;
+};
+
+class A : virtual public V
+{
+public:
+    virtual int f();
+private:
+    int a;
+};
+
+class B : public A
+{
+public:
+    int f();
+private:
+    int b;
+};
+
+class C : public virtual V
+{
+public:
+    int c;
+};
+
+class AD
+{
+public:
+    virtual int vg() = 0;
+};
+
+class D : public AD, virtual public V
+{
+public:
+    static void s();
+    virtual int vg();
+    virtual int vd();
+    int fd();
+    int d;
+};
+
+class E : public B, virtual public V, public D, public C
+{
+public:
+    int f();
+    int vg();
+    int vv();
+    int e;
+};
+
+D   dd;
+D*  ppd = &dd;
+AD* pAd = &dd;
+
+A   a;
+B   b;
+C   c;
+D   d;
+E   e;
+V   v;
+VB  vb;
+
+
+A* 	pAa	= 	&a;
+A*	pAe	=	&e;
+
+B*	pBe	=	&e;
+
+D*	pDd	=	&d;
+D*	pDe	=	&e;
+
+V*	pVa	=	&a;
+V*	pVv	=	&v;
+V*	pVe	=	&e;
+V*     pVd	=	&d;
+
+AD*	pADe	=	&e;
+
+E*	pEe	=	&e;
+
+VB*     pVB	=	&vb;
+
+void init()
+{
+	a.vb = 1;
+	b.vb = 2;
+	c.vb = 3;
+	d.vb = 4;
+	e.vb = 5;
+	v.vb = 6;
+	vb.vb = 7;
+
+	d.d	= 1;
+	e.d	=  2;
+}
+
+extern "C" int printf(const char *, ...);
+
+int all_count = 0;
+int failed_count = 0;
+
+#define TEST(EXPR, EXPECTED) \
+   ret = EXPR; \
+   if (ret != EXPECTED) {\
+      printf("Failed %s is %d, should be %d!\n", #EXPR, ret, EXPECTED); \
+      failed_count++; } \
+   all_count++;
+
+int ret;
+
+void test_calls()
+{
+	TEST(pAe->f(), 20);
+	TEST(pAa->f(), 1);
+
+	TEST(pDe->vg(), 202);
+	TEST(pADe->vg(), 202);
+	TEST(pDd->vg(), 101);
+
+	TEST(pEe->vvb(), 411);
+
+	TEST(pVB->vvb(), 407);
+
+	TEST(pBe->vvb(), 411);
+	TEST(pDe->vvb(), 411);
+
+        TEST(pEe->vd(), 282);
+        TEST(pEe->fvb(), 311);
+    
+        TEST(pEe->D::vg(), 102);
+	printf("Did %d tests, of which %d failed.\n", all_count, failed_count);
+}
+#ifdef usestubs
+extern "C" {
+  void set_debug_traps();
+  void breakpoint();
+};
+#endif
+
+main()
+{
+#ifdef usestubs
+   set_debug_traps();
+   breakpoint();
+#endif
+    init();
+
+    e.w = 7;
+    e.vb = 11;
+
+    test_calls();
+}
+
+int A::f() {return 1;}
+int B::f() {return 2;}
+void D::s() {}
+int E::f() {return 20;}
+int D::vg() {return 100+d;}
+int E::vg() {return 200+d;}
+int V::f() {return 600+w;}
+int V::vv() {return 400+w;}
+int E::vv() {return 450+w;}
+int D::fd() {return 250+d;}
+int D::vd() {return 280+d;}
+int VB::fvb() {return 300+vb;}
+int VB::vvb() {return 400+vb;}
diff --git a/gdb/testsuite/gdb.c++/virtfunc.exp b/gdb/testsuite/gdb.c++/virtfunc.exp
new file mode 100644
index 0000000..d0db755
--- /dev/null
+++ b/gdb/testsuite/gdb.c++/virtfunc.exp
@@ -0,0 +1,751 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+set nl "\[\r\n\]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "virtfunc"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1
+}
+
+# if we are on HPUX and we are not compiled with gcc, then skip these tests.
+
+if [istarget hppa*-*-hpux*] {
+    if {!$gcc_compiled} {
+	continue 
+    }
+}
+
+
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set src "${srcdir}/${subdir}/${srcfile}"
+if  { [gdb_compile "${src}" "${binfile}" executable {c++ debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc gdb_virtfunc_init {} {
+    global srcdir subdir binfile
+    global gdb_prompt
+
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+}
+
+proc gdb_virtfunc_restart {} {
+    gdb_exit;
+    gdb_start;
+    gdb_virtfunc_init;
+    runto 'test_calls(void)';
+}
+
+#
+#  Test printing of the types of various classes.
+#
+
+proc test_ptype_of_classes {} {
+    global gdb_prompt
+    global ws
+    global nl
+
+    # This used to be a fail if it printed "struct" not "class".  But
+    # since this struct doesn't use any special C++ features, it is
+    # considered right for GDB to print it as "struct".
+    send_gdb "ptype VA\n"
+    gdb_expect {
+	-re "type = (struct|class) VA \{(${ws}public:|)${ws}int va;${ws}VA & operator=\\(VA const &\\);${ws}VA\\(VA const &\\);${ws}VA\\(void\\);${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VA"
+	}
+	-re "type = (struct|class) VA \{(${ws}public:|)${ws}int va;((${ws}VA & operator=\\(VA const &\\);)|(${ws}VA\\(VA const &\\);)|(${ws}VA\\(void\\);))*${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VA (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype VA"
+	}
+	timeout {
+	    fail "ptype VA (timeout)"
+	}
+    }
+
+    send_gdb "ptype VB\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VB"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VB (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype VB"
+	}
+	timeout {
+	    fail "ptype VB (timeout)"
+	}
+    }
+
+    send_gdb "ptype V\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype V"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype V (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype V"
+	}
+	timeout {
+	    fail "ptype V (timeout)"
+	}
+    }
+
+    send_gdb "ptype A\n"
+    gdb_expect {
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb\[\\\$\.\]+V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype A"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb\[\\\$\.\]+V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype A (obsolescent gcc or gdb)"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.FOO;${ws}int a;${ws}public:${ws}virtual int f.void.;${ws}\}$nl$gdb_prompt $" {
+	    # This happens because the type is defined only after it is
+	    # too late.
+	    fail "ptype A (known failure with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype A"
+	}
+	timeout {
+	    fail "ptype A (timeout)"
+	}
+    }
+
+    send_gdb "ptype B\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype B"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype B (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype B"
+	}
+	timeout {
+	    fail "ptype B (timeout)"
+	}
+    }
+
+    send_gdb "ptype C\n"
+    gdb_expect {
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;${ws}C & operator=\\(C const &\\);${ws}C\\(int, C const &\\);${ws}C\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype C"
+	}
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(int, C const &\\);)|(${ws}C\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype C (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype C"
+	}
+	timeout {
+	    fail "ptype C (timeout)"
+	}
+    }
+
+    send_gdb "ptype AD\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype AD"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype AD (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype AD"
+	}
+	timeout {
+	    fail "ptype AD (timeout)"
+	}
+    }
+
+    send_gdb "ptype D\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype D"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype D (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype D"
+	}
+	timeout {
+	    fail "ptype D (timeout)"
+	}
+    }
+
+    send_gdb "ptype E\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype E"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype E (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype E"
+	}
+	timeout {
+	    fail "ptype E (timeout)"
+	}
+    }
+
+    send_gdb "ptype dd\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype dd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype dd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype dd"
+	}
+	timeout {
+	    fail "ptype dd (timeout)"
+	}
+    }
+
+    send_gdb "ptype ppd\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype ppd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype ppd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype ppd"
+	}
+	timeout {
+	    fail "ptype ppd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAd\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAd"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAd"
+	}
+	timeout {
+	    fail "ptype pAd (timeout)"
+	}
+    }
+
+    send_gdb "ptype a\n"
+    gdb_expect {
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype a"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype a (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype a"
+	}
+	timeout {
+	    fail "ptype a (timeout)"
+	}
+    }
+
+    send_gdb "ptype b\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype b"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype b (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype b"
+	}
+	timeout {
+	    fail "ptype b (timeout)"
+	}
+    }
+
+    send_gdb "ptype c\n"
+    gdb_expect {
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;${ws}C & operator=\\(C const &\\);${ws}C\\(int, C const &\\);${ws}C\\(int\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype c"
+	}
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(int, C const &\\);)|(${ws}C\\(int\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype c (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype c"
+	}
+	timeout {
+	    fail "ptype c (timeout)"
+	}
+    }
+
+    send_gdb "ptype d\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype d"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype d (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype d"
+	}
+	timeout {
+	    fail "ptype d (timeout)"
+	}
+    }
+
+    send_gdb "ptype e\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype e"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype e (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype e"
+	}
+	timeout {
+	    fail "ptype e (timeout)"
+	}
+    }
+
+    send_gdb "ptype v\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype v"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype v (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype v"
+	}
+	timeout {
+	    fail "ptype v (timeout)"
+	}
+    }
+
+    send_gdb "ptype vb\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype vb"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\}$nl$gdb_prompt $" {
+	    pass "ptype vb (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype vb"
+	}
+	timeout {
+	    fail "ptype vb (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAa\n"
+    gdb_expect {
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAa"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAa (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAa"
+	}
+	timeout {
+	    fail "ptype pAa (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAe\n"
+    gdb_expect {
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAe"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pAe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAe"
+	}
+	timeout {
+	    fail "ptype pAe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pBe\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pBe"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pBe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pBe"
+	}
+	timeout {
+	    fail "ptype pBe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pDd\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pDd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pDd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pDd"
+	}
+	timeout {
+	    fail "ptype pDd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pDe\n"
+    gdb_expect {
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pDe"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pDe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pDe"
+	}
+	timeout {
+	    fail "ptype pDe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVa\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVa"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVa (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVa"
+	}
+	timeout {
+	    fail "ptype pVa (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVv\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVv"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVv (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVv"
+	}
+	timeout {
+	    fail "ptype pVv (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVe\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVe"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVe"
+	}
+	timeout {
+	    fail "ptype pVe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVd\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVd"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVd"
+	}
+	timeout {
+	    fail "ptype pVd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pADe\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pADe"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pADe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pADe"
+	}
+	timeout {
+	    fail "ptype pADe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pEe\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pEe"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pEe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pEe"
+	}
+	timeout {
+	    fail "ptype pEe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVB\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVB"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\} \[*\]+$nl$gdb_prompt $" {
+	    pass "ptype pVB (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVB"
+	}
+	timeout {
+	    fail "ptype pVB (timeout)"
+	}
+    }
+}
+
+#
+#  Test calling of virtual functions.
+#
+
+proc test_virtual_calls {} {
+    global gdb_prompt
+    global GDB
+    global nl
+
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "This target can not call functions"
+	return 0
+    }
+
+    send_gdb "print pAe->f()\n"
+    gdb_expect {
+	-re ".* = 20$nl$gdb_prompt $" { pass "print pAe->f()" }
+	-re "Cannot invoke functions on this machine.*$gdb_prompt $" {
+	    fail "print pAe->f() (cannot invoke functions, skipping virtual calls)"
+	    return 0
+	}
+	-re ".*Cannot access memory at address 0x8.*$gdb_prompt $" {
+	    fail "print pAe->f() \
+(known failure with gcc cygnus-2.4.5-930417, skipping virtual calls)"
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print pAe->f()" }
+	timeout { fail "print pAe->f() (timeout)" }
+	eof { fail "print pAe->f() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pAa->f()\n"
+    gdb_expect {
+	-re ".* = 1$nl$gdb_prompt $" { pass "print pAa->f()" }
+	-re ".*$gdb_prompt $" { fail "print pAa->f()" }
+	timeout { fail "print pAa->f() (timeout)" }
+	eof { fail "print pAa->f() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDe->vg()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 202$nl$gdb_prompt $" { pass "print pDe->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pDe->vg()" }
+	timeout { fail "print pDe->vg() (timeout)" }
+	eof { fail "print pDe->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pADe->vg()\n"
+    gdb_expect {
+	-re ".* = 202$nl$gdb_prompt $" { pass "print pADe->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pADe->vg()" }
+	timeout { fail "print pADe->vg() (timeout)" }
+	eof { fail "print pADe->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDd->vg()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 101$nl$gdb_prompt $" { pass "print pDd->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pDd->vg()" }
+	timeout { fail "print pDd->vg() (timeout)" }
+	eof { fail "print pDd->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411$nl$gdb_prompt $" { pass "print pEe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->vvb()" }
+	timeout { fail "print pEe->vvb() (timeout)" }
+	eof { fail "print pEe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pVB->vvb()\n"
+    gdb_expect {
+	-re ".* = 407$nl$gdb_prompt $" { pass "print pVB->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pVB->vvb()" }
+	timeout { fail "print pVB->vvb() (timeout)" }
+	eof { fail "print pVB->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pBe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411$nl$gdb_prompt $" { pass "print pBe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pBe->vvb()" }
+	timeout { fail "print pBe->vvb() (timeout)" }
+	eof { fail "print pBe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411$nl$gdb_prompt $" { pass "print pDe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pDe->vvb()" }
+	timeout { fail "print pDe->vvb() (timeout)" }
+	eof { fail "print pDe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->vd()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 282$nl$gdb_prompt $" { pass "print pEe->vd()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->vd()" }
+	timeout { fail "print pEe->vd() (timeout)" }
+	eof { fail "print pEe->vd() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->fvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 311$nl$gdb_prompt $" { pass "print pEe->fvb()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->fvb()" }
+	timeout { fail "print pEe->fvb() (timeout)" }
+	eof { fail "print pEe->fvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->D::vg()\n"
+    setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 102$nl$gdb_prompt $" { pass "print pEe->D::vg()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->D::vg()" }
+	timeout { fail "print pEe->D::vg() (timeout)" }
+	eof { fail "print pEe->D::vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+
+    set prms_id 0
+    set bug_id 0
+
+    gdb_start;
+    gdb_virtfunc_init;
+
+    # Get the debug format for the compiled test case.  If that
+    # format is DWARF 1 then just skip all the tests since none of
+    # them will pass.
+
+    if [ runto_main ] then {
+	get_debug_format
+	if [ setup_xfail_format "DWARF 1" ] then {
+	    fail "C++ tests skipped due to limited C++ support in DWARF 1 debug format"
+	    return
+	}
+	clear_xfail "*-*-*"
+    }
+
+    test_ptype_of_classes
+
+    if [ runto 'test_calls(void)' ] then {
+	test_virtual_calls
+    }
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/ChangeLog b/gdb/testsuite/gdb.chill/ChangeLog
new file mode 100644
index 0000000..9db44ea
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/ChangeLog
@@ -0,0 +1,313 @@
+Thu May 21 02:45:18 1998  Felix Lee  <flee@zog.cygnus.com>
+
+	* chexp.exp: fix tests that assume >16-bit ints.
+
+Wed Sep 10 15:01:55 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* *.exp: The end-all be-all of quoting fixes. Ha.
+
+Thu Aug 21 10:31:23 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* enum.exp: More quoting fixes.
+	* pr-9946.exp: Ditto.
+	* gch1280.exp: Ditto.
+	* gch1272.exp: Ditto.
+
+Tue Aug 12 21:48:08 1997  Bob Manson  <manson@charmed.cygnus.com>
+
+	* tests2.exp: Fix quoting.
+	* tests1.exp: Ditto.
+	* pr-9946.exp: Ditto.
+	* enum.exp: Ditto.
+	* builtins.exp: Ditto.
+	* powerset.exp: Ditto.
+	* misc.exp: Ditto.
+	* gch981.exp: Ditto.
+	* gch922.exp: Ditto.
+	* gch1280.exp: Ditto.
+	* gch1272.exp: Ditto.
+	* gch1041.exp: Ditto.
+
+Sat Nov 23 14:00:59 1996  Fred Fish  <fnf@cygnus.com>
+
+	* misc.exp: Change x86 linux setup_xfails to use new
+ 	i*86-pc-linux*-gnu quads.
+	* tuples.exp: Ditto.
+	* tests2.exp: Ditto.
+	* pr-5016.exp: Ditto.
+
+	* tuples.exp: Add i*86-pc-linux-gnu setup_fail to existing
+	xfails for 'set var vs1 := [ "bar", 42, m_ps[ a ] ]',
+	'set var $i := m_s1["foo", 44, m_ps[a ]]', and
+	'set var vs2 := [ 10+3, m_s1[ "foo" , 42, m_ps[ b ]]]'.
+	
+Mon Nov 11 10:27:32 1996  Fred Fish  <fnf@cygnus.com>
+
+	* callch.exp: Add mips*-sgi-irix* xfail for
+	"call king(a, otto[[10, 15], [20, 25]])".
+	* pr-8742.exp: Add mips*-sgi-irix* xfails for
+	"pass int powerset tuple"
+	"pass set powerset tuple"
+	"pass modeless int powerset tuple" and
+	"pass modeless set powerset tuple".
+	* tuples.exp: Add sparc-*-solaris* and sparc-*-sunos*
+	xfails for several "set var" commands that are failing.
+	Convert most of the set commands into gdb_test_exact
+	commands.
+
+Fri Oct 11 16:48:56 1996  Fred Fish  <fnf@cygnus.com>
+
+	* expstruct.exp (objfile2): Set and use, like other chill tests.
+	* pr-4975.exp: Ditto.
+	* pr-5646.exp: Ditto.
+	* pr-8134.exp: Ditto.
+
+Thu Sep  5 01:54:42 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* gch1280.exp: Enhance test case.
+
+Wed Sep  4 07:30:44 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* gch1272.{ch,exp}, gch1280.{ch,exp}, pr-9946.{ch,exp}: 
+	New test cases.
+
+Sun Aug 18 13:29:48 1996  Fred Fish  <fnf@cygnus.com>
+
+	* tests2.exp: Remove mips-sgi-irix* setup_xfail for
+	"real write 4" and "real write 8".
+
+Mon Jun 10 14:04:05 1996  Fred Fish  <fnf@cygnus.com>
+
+	* tests1.exp (test_modes): Remove *-*-* setup_sfail for 
+	"print unnumbered set range mode" and
+	"print numbered set range mode".
+
+Wed Apr 17 01:23:06 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* tests1.{ch,exp}: Tets case modified and enhanced.
+
+Tue Apr  9 01:18:04 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* gch981.{ch,exp}, gch1041.{ch,exp}: New test cases.
+
+Wed Mar  6 00:29:35 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* powerset.exp: Add test.
+
+Tue Mar  5 23:41:39 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* gch922.{ch,exp}, powerset.{ch,exp}: New test cases.
+
+	* builtins.exp, chillvars.exp, misc.exp, tests1.exp: Updated
+	due to new format of nonprintable characters (control sequence
+	instead of C'xx').
+	
+Tue Mar  5 00:09:17 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* string.ch, string.exp:  Add tests (from Cygnus PR chill/9078).
+
+	* pr-9095.ch, pr-9095.exp:  New test case.
+
+Fri Feb  9 08:22:16 1996  Fred Fish  <fnf@cygnus.com>
+
+	* Makefile.in (clean): Add missing '{'.
+
+Tue Feb  6 21:52:26 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-8894.exp, pr-8894.ch, pr-8894-grt.ch:  New test case.
+
+Mon Jan 29 00:05:01 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* builtins.ch, builtins.exp: Enhance test case.
+
+	* extstruct.ch, extstruct-grt.ch, extstruct.exp: New test case.
+
+Tue Jan 23 16:57:13 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* enum.ch, enum.exp:  New test case (covers PRs 8869 and 8870).
+
+Thu Jan 11 17:34:01 1996  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* Makefile.in (PROGS):  Removed.
+	(clean mostlyclean):  Remove *.exe rather than ${PROGS}.
+
+	* pr-8742.ch, pr-8742.exp:  New test case.
+
+Tue Jan  9 04:47:27 1996  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* misc.ch, misc.exp: Enhance test case.
+
+Sat Dec 30 15:31:59 1995  Fred Fish  <fnf@cygnus.com>
+
+	* tests2.exp: Setup_xfail "i*86-*-linux" and 
+	"mips-sgi-irix*" for "real write 4" and "real write 8".
+	Conditionalize both tests for system specific value
+	of "infinity" string.
+
+Fri Dec 29 10:46:09 1995  Fred Fish  <fnf@cygnus.com>
+
+	* builtins.exp (test_size):  Alpha seems to have long builtins.
+	* tests1.exp: Setup xfail "*-*-*" for "ptype r2".
+	* tests2.exp: Add check to skip chill tests.
+	
+Mon Dec 11 16:53:40 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* tuples.ch, tuples.exp:  Exhance test cases (from PR 8643).
+
+Mon Dec 11 06:57:07 1995  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* builtins.exp, pr-5016.{ch,exp}, result.{ch,exp},
+	tests1.{ch,exp}: Enhance test cases.
+
+Thu Dec  7 05:16:34 1995  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* builtins.ch, builtins.exp, Makefile.in: New test case.
+
+Tue Dec  5 01:51:45 1995  Wilfried Moser (Alcatel)  <moser@rtl.cygnus.com>
+
+	* tests2.exp: Add compiling of the test case.
+
+Fri Dec  1 00:08:37 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-8405.ch, pr-8405.exp, Makefile.in:  New test case.
+
+	* tests1.exp, tests2.exp (test_print_reject):  Remove;  causes
+	conflicts with later tests using test_print_reject in ../lib/gdb.exp.
+	(passcount):  Remove.
+	* tests2.exp (test_print_accept):  Removed.
+	(test_write):  Re-write to use gdb_test rather than test_print_accept.
+	* tests1.exp (test_print_accept_exact):  Removed.
+	(tests_locations):  Rewrite to use gdb_test and not above proc.
+	
+	* tests1.ch, tests1.exp, tests2.ch, tests2.exp, Makefile.in:
+	New (extensive) test cases.
+	* chexp.exp:  Fix relations to return TRUE or FALSE.
+
+Wed Nov 29 19:28:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* Makefile.in:  Add .exp.check rule.
+	* callch.ch:  Add missing "%." to format strings.
+	* callch.exp:  Fix argument to gdb_load.
+	* chexp.exp:  Add specific error messages to test_print_reject calls.
+	* misc.exp:  Add a test for PR 8496.
+	* pr-6632.exp, pr-8136.exp:  Link executables from two .o files.
+
+Sat Nov 25 20:49:27 1995  Fred Fish  <fnf@phydeaux.cygnus.com>
+
+	* pr-5016.exp: xfail "whatis i" for alpha-osf-dec-osf2*, same as linux.
+
+Sun Oct 29 17:58:01 1995  Fred Fish  <fnf@cygnus.com>
+
+	* pr-5016.exp: xfail "whatis i" for sparc-sun-sunos4*, same as linux.
+
+Wed Oct  4 18:20:53 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-8136.{ch,exp}, pr-8134.exp, func1.ch, Makefile.in: New test cases.
+
+Wed Sep 27 11:51:50 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* tuples.ch. tuples.exp:  Add new test for setting a variant record
+	using a tuple, and access the fields.
+
+Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
+
+	* Update all FSF addresses except those in COPYING* files.
+
+Thu Jul 27 20:36:30 1995  Fred Fish  (fnf@cygnus.com)
+
+	* pr-5016.exp: xfail "i*86-*-linux*" for "whatis int-range"
+	test.  Thinks it is "_cint" rather than "m_index".
+	* misc.exp: xfail "i*86-*-linux*" for "info line" test.
+	Line number is off by one.
+
+Wed Jun 14 13:07:45 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* chillvars.exp, string.exp:  New tests for LOWER/UPPER/LENGTH.
+
+Wed Jun  7 17:52:38 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* chillvars.ch (xptr):  Declare new variable.
+	* chillvars.exp (test_ptr):  New function to test EXPR->MODENAME.
+
+Tue Mar 28 17:13:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-6632.ch, pr-6632-grt.ch, pr-6632.exp, Makefile.in:  New test case.
+
+Tue Mar 21 12:10:06 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* tuples.exp (do_tests): Make names of "print v_ps" test unique.
+
+Wed Mar  8 13:26:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* *.exp: Skip all tests silently if skip_chill_tests returns true.
+
+	* misc.exp: Remove reference to non-existent variable passcount.
+
+Tue Mar  7 19:30:05 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* string.ch, string.exp, Makefile.in:  New test case.
+
+Mon Mar  6 14:11:01 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* tuples.ch (setnmode);  New module.
+	* tuples.exp:  Add some extra tests.
+
+Sat Mar  4 15:16:17 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* callch.ch, callch.exp, Makefile.in:  New test case.
+
+Thu Mar  2 06:17:41 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* misc.exp: If executable does not exist, issue warning and skip
+	remaining tests, like other chill tests.
+
+Wed Mar  1 20:28:42 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* misc.ch, misc.exp, Makefile.in:  New test case.
+
+Mon Feb 20 16:19:58 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* chillvars.ch:  Add missing INIT's.
+	* chillvars.exp:  Allow builtin types as either case. E.g. (BOOL|bool).
+	* pr-5016.exp:  Likewise.
+
+Sun Feb 12 11:26:08 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-6292.ch, pr-6292.exp, Makefile.in:  New test case.
+
+Wed Feb  1 13:09:48 1995  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* tuples.ch, tuples.exp, Makefile.in:  New test case.
+
+Mon Nov 28 18:39:08 1994  Per Bothner  <bothner@kalessin.cygnus.com>
+
+	* pr-5984.ch, pr-5984.exp, Makefile.in:  New test case.
+
+Fri Sep 16 16:55:03 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* pr-5646.ch, pr-5646-grt.ch, pr-5646.exp, Makefile.in: New testcase.
+
+Tue Sep  6 13:21:27 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* pr-5016.ch, pr-5016.exp, Makefile.in:  New testcase.
+	* Makefile.in (.exe.check):  New rule, to run just one test.
+
+Tue Jun 14 16:20:18 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* result.ch, result.exp, Makefile.in:  New test case.
+	* pr-4975.ch, pr-4975-grt.ch, pr-4975.exp, Makefile.in:  Ditto.
+
+Thu Jun  9 15:20:43 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* pr-5022.ch, pr-5022.exp:  New testcase.
+	* chillvars.exp:  Remove spurious newline.
+
+	* Makefile.in:  Bunch of fixes so it actually works in this
+	directory.  (E.g. add extra ../ where needed.)
+	Also, add .exe to executables, so we can use suffix rules.
+	* chexp.exp (test_print_reject):  Update syntax error message.
+	* chillvars.ch (module PR_5020):  Moved from here ...
+	* pr-5022.ch: ... to this new file.
+	* chillvars.exp, pr-5020.exp (binfile):  Add .exe extension.
+	* chillvars.exp, pr-5020.exp: Don't check all_flag.
+	* pr-5020.exp:  Add more tests; fix "print y pretty" output.
diff --git a/gdb/testsuite/gdb.chill/Makefile.in b/gdb/testsuite/gdb.chill/Makefile.in
new file mode 100644
index 0000000..a965b57
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/Makefile.in
@@ -0,0 +1,26 @@
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+all: 
+	@echo "Nothing to be done for all..."
+
+#### host, target, and site specific Makefile frags come in here.
+
+.SUFFIXES: .ch .o .exe .exp .check
+
+# Do 'make chillvars.check' to run just the chillvars.{ch,exp} test.
+
+.exp.check:
+	rootme=`pwd`/; export rootme; \
+	cd .. ; \
+	$(MAKE) just-check RUNTESTFLAGS="${RUNTESTFLAGS} $*.exp" \
+	  EXPECT=${EXPECT}
+
+clean mostlyclean:
+	-rm -f *.o ${OBJS} *.exe *~ core 
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.chill/builtins.ch b/gdb/testsuite/gdb.chill/builtins.ch
new file mode 100644
index 0000000..ef12c83
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/builtins.ch
@@ -0,0 +1,83 @@
+xx: MODULE
+
+DCL v_bool BOOL INIT := FALSE;
+DCL v_char CHAR INIT := 'X';
+DCL v_byte BYTE INIT := -30;
+DCL v_ubyte UBYTE INIT := 30;
+DCL v_int INT INIT := -333;
+DCL v_uint UINT INIT := 333;
+DCL v_long LONG INIT := -4444;
+DCL v_ulong ULONG INIT := 4444;
+DCL v_ptr PTR;
+
+SYNMODE m_set = SET (e1, e2, e3, e4, e5, e6);
+DCL v_set m_set INIT := e3;
+
+SYNMODE m_set_range = m_set(e2:e5);
+DCL v_set_range m_set_range INIT := e3;
+
+SYNMODE m_numbered_set = SET (n1 = 25, n2 = 22, n3 = 35, n4 = 33,
+			      n5 = 45, n6 = 43);
+DCL v_numbered_set m_numbered_set INIT := n3;
+
+SYNMODE m_char_range = CHAR('A':'Z');
+DCL v_char_range m_char_range INIT := 'G';
+
+SYNMODE m_bool_range = BOOL(FALSE:FALSE);
+DCL v_bool_range m_bool_range;
+
+SYNMODE m_long_range = LONG(255:3211);
+DCL v_long_range m_long_range INIT := 1000;
+
+SYNMODE m_range = RANGE(12:28);
+DCL v_range m_range INIT := 23;
+
+SYNMODE m_chars = CHARS(20);
+SYNMODE m_chars_v = CHARS(20) VARYING;
+DCL v_chars CHARS(20);
+DCL v_chars_v CHARS(20) VARYING INIT := "foo bar";
+
+SYNMODE m_bits = BOOLS(10);
+DCL v_bits BOOLS(10);
+
+SYNMODE m_arr = ARRAY(1:10) BYTE;
+DCL v_arr ARRAY(1:10) BYTE;
+
+SYNMODE m_char_arr = ARRAY (CHAR) BYTE;
+DCL v_char_arr ARRAY(CHAR) BYTE;
+
+SYNMODE m_bool_arr = ARRAY (BOOL) BYTE;
+DCL v_bool_arr ARRAY (BOOL) BYTE;
+
+SYNMODE m_int_arr = ARRAY (INT) BYTE;
+DCL v_int_arr ARRAY (INT) BYTE;
+
+SYNMODE m_set_arr = ARRAY (m_set) BYTE;
+DCL v_set_arr ARRAY (m_set) BYTE;
+
+SYNMODE m_numbered_set_arr = ARRAY (m_numbered_set) BYTE;
+DCL v_numbered_set_arr ARRAY (m_numbered_set) BYTE;
+
+SYNMODE m_char_range_arr = ARRAY (m_char_range) BYTE;
+DCL v_char_range_arr ARRAY (m_char_range) BYTE;
+
+SYNMODE m_set_range_arr = ARRAY (m_set_range) BYTE;
+DCL v_set_range_arr ARRAY (m_set_range) BYTE;
+
+SYNMODE m_bool_range_arr = ARRAY (m_bool_range) BYTE;
+DCL v_bool_range_arr ARRAY (m_bool_range) BYTE;
+
+SYNMODE m_long_range_arr = ARRAY (m_long_range) BYTE;
+DCL v_long_range_arr ARRAY (m_long_range) BYTE;
+
+SYNMODE m_range_arr = ARRAY (m_range) BYTE;
+DCL v_range_arr ARRAY (m_range) BYTE;
+
+SYNMODE m_struct = STRUCT (i LONG,
+                           c CHAR,
+                           s CHARS(30));
+DCL v_struct m_struct;
+
+v_bool := TRUE;
+
+END xx;
diff --git a/gdb/testsuite/gdb.chill/builtins.exp b/gdb/testsuite/gdb.chill/builtins.exp
new file mode 100644
index 0000000..a75ca20
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/builtins.exp
@@ -0,0 +1,441 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "builtins"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break xx_\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n" 
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+#	First one is string to send_gdb to gdb
+#	Second one is string to match gdb result to
+#	Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+    global gdb_prompt
+    global passcount
+    global verbose
+
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set sendthis [lindex $args 0]
+    set expectthis [lindex $args 1]
+    set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+    if $result==0 {incr passcount}
+    return $result
+}
+
+proc test_lower {} {
+    global passcount
+
+    verbose "testing builtin LOWER"
+    set passcount 0
+
+    # discrete mode names
+    test_print_accept "print lower(bool)" "FALSE"
+    test_print_accept "print lower(char)" {'\^[(]0[)]'}
+    test_print_accept "print lower(byte)" "-128"
+    test_print_accept "print lower(ubyte)" "0"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print lower(int)" "-2147483648"
+    } else {
+	test_print_accept "print lower(int)" "-32768"
+    }
+    test_print_accept "print lower(uint)" "0"
+    setup_xfail "alpha-*-*"
+    test_print_accept "print lower(long)" "-2147483648"
+    test_print_accept "print lower(ulong)" "0"
+    test_print_accept "print lower(m_set)" "e1"
+    test_print_accept "print lower(m_set_range)" "e2"
+    test_print_accept "print lower(m_numbered_set)" "n2"
+    test_print_accept "print lower(m_char_range)" "'A'"
+    test_print_accept "print lower(m_bool_range)" "FALSE"
+    test_print_accept "print lower(m_long_range)" "255"
+    test_print_accept "print lower(m_range)" "12"
+
+    # discrete locations
+    test_print_accept "print lower(v_bool)" "FALSE"
+    test_print_accept "print lower(v_char)" {'\^[(]0[)]'}
+    test_print_accept "print lower(v_byte)" "-128"
+    test_print_accept "print lower(v_ubyte)" "0"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print lower(v_int)" "-2147483648"
+    } else {
+	test_print_accept "print lower(v_int)" "-32768"
+    }
+    test_print_accept "print lower(v_uint)" "0"
+    setup_xfail "alpha-*-*"
+    test_print_accept "print lower(v_long)" "-2147483648"
+    test_print_accept "print lower(v_ulong)" "0"
+    test_print_accept "print lower(v_set)" "e1"
+    test_print_accept "print lower(v_set_range)" "e2"
+    test_print_accept "print lower(v_numbered_set)" "n2"
+    test_print_accept "print lower(v_char_range)" "'A'"
+    test_print_accept "print lower(v_bool_range)" "FALSE"
+    test_print_accept "print lower(v_long_range)" "255"
+    test_print_accept "print lower(v_range)" "12"
+
+    # string mode names
+    test_print_accept "print lower(m_chars)" "0"
+    test_print_accept "print lower(m_chars_v)" "0"
+    test_print_accept "print lower(m_bits)" "0"
+
+    # string locations
+    test_print_accept "print lower(v_chars)" "0"
+    test_print_accept "print lower(v_chars_v)" "0"
+    test_print_accept "print lower(v_bits)" "0"
+
+    # string expressions
+    test_print_accept "print lower(\"abcd\")" "0"
+    test_print_accept "print lower(B'010101')" "0"
+
+    # array mode name
+    test_print_accept "print lower(m_arr)" "1";
+    test_print_accept "print lower(m_char_arr)" {'\^[(]0[)]'}
+    test_print_accept "print lower(m_bool_arr)" "FALSE"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print lower(m_int_arr)" "-2147483648"
+    } else {
+	test_print_accept "print lower(m_int_arr)" "-32768"
+    }
+    test_print_accept "print lower(m_set_arr)" "e1"
+    test_print_accept "print lower(m_set_range_arr)" "e2"
+    test_print_accept "print lower(m_numbered_set_arr)" "n2"
+    test_print_accept "print lower(m_char_range_arr)" "'A'"
+    test_print_accept "print lower(m_bool_range_arr)" "FALSE"
+    test_print_accept "print lower(m_long_range_arr)" "255"
+    test_print_accept "print lower(m_range_arr)" "12"
+
+    # array locations
+    test_print_accept "print lower(v_arr)" "1";
+    test_print_accept "print lower(v_char_arr)" {'\^[(]0[)]'}
+    test_print_accept "print lower(v_bool_arr)" "FALSE"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print lower(v_int_arr)" "-2147483648"
+    } else {
+	test_print_accept "print lower(v_int_arr)" "-32768"
+    }
+    test_print_accept "print lower(v_set_arr)" "e1"
+    test_print_accept "print lower(v_set_range_arr)" "e2"
+    test_print_accept "print lower(v_numbered_set_arr)" "n2"
+    test_print_accept "print lower(v_char_range_arr)" "'A'"
+    test_print_accept "print lower(v_bool_range_arr)" "FALSE"
+    test_print_accept "print lower(v_long_range_arr)" "255"
+    test_print_accept "print lower(v_range_arr)" "12"
+}
+
+proc test_upper {} {
+    global passcount
+
+    verbose "testing builtin UPPER"
+    set passcount 0
+
+    # discrete mode names
+    test_print_accept "print upper(bool)" "TRUE"
+    test_print_accept "print upper(char)" {'\^[(]255[)]'}
+    test_print_accept "print upper(byte)" "127"
+    test_print_accept "print upper(ubyte)" "255"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print upper(int)" "2147483647"
+	test_print_accept "print upper(uint)" "4294967295"
+	setup_xfail "alpha-*-*"
+	test_print_accept "print upper(long)" "4294967295"
+	test_print_accept "print upper(ulong)" "18446744073709551615"
+    } else {
+	test_print_accept "print upper(int)" "32767"
+	test_print_accept "print upper(uint)" "65535"
+	test_print_accept "print upper(long)" "2147483647"
+	test_print_accept "print upper(ulong)" "4294967295"
+    }
+    test_print_accept "print upper(m_set)" "e6"
+    test_print_accept "print upper(m_set_range)" "e5"
+    test_print_accept "print upper(m_numbered_set)" "n5"
+    test_print_accept "print upper(m_char_range)" "'Z'"
+    test_print_accept "print upper(m_bool_range)" "FALSE"
+    test_print_accept "print upper(m_long_range)" "3211"
+    test_print_accept "print upper(m_range)" "28"
+
+    # discrete locations
+    test_print_accept "print upper(v_bool)" "TRUE"
+    test_print_accept "print upper(v_char)" {'\^[(]255[)]'}
+    test_print_accept "print upper(v_byte)" "127"
+    test_print_accept "print upper(v_ubyte)" "255"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print upper(v_int)" "2147483647"
+	test_print_accept "print upper(v_uint)" "4294967295"
+	setup_xfail "alpha-*-*"
+	test_print_accept "print upper(v_long)" "4294967295"
+	test_print_accept "print upper(v_ulong)" "18446744073709551615"
+    } else {
+	test_print_accept "print upper(v_int)" "32767"
+	test_print_accept "print upper(v_uint)" "65535"
+	test_print_accept "print upper(v_long)" "2147483647"
+	test_print_accept "print upper(v_ulong)" "4294967295"
+    }
+    test_print_accept "print upper(v_set)" "e6"
+    test_print_accept "print upper(v_set_range)" "e5"
+    test_print_accept "print upper(v_numbered_set)" "n5"
+    test_print_accept "print upper(v_char_range)" "'Z'"
+    test_print_accept "print upper(v_bool_range)" "FALSE"
+    test_print_accept "print upper(v_long_range)" "3211"
+    test_print_accept "print upper(v_range)" "28"
+
+    # string mode names
+    test_print_accept "print upper(m_chars)" "19"
+    test_print_accept "print upper(m_chars_v)" "19"
+    test_print_accept "print upper(m_bits)" "9"
+
+    # string locations
+    test_print_accept "print upper(v_chars)" "19"
+    test_print_accept "print upper(v_chars_v)" "19"
+    test_print_accept "print upper(v_bits)" "9"
+
+    # string expressions
+    test_print_accept "print upper(\"abcd\")" "3"
+    test_print_accept "print upper(B'010101')" "5"
+
+    # array mode name
+    test_print_accept "print upper(m_arr)" "10";
+    test_print_accept "print upper(m_char_arr)" {'\^[(]255[)]'}
+    test_print_accept "print upper(m_bool_arr)" "TRUE"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print upper(m_int_arr)" "2147483647"
+    } else {
+	test_print_accept "print upper(m_int_arr)" "32767"
+    }
+    test_print_accept "print upper(m_set_arr)" "e6"
+    test_print_accept "print upper(m_set_range_arr)" "e5"
+    test_print_accept "print upper(m_numbered_set_arr)" "n5"
+    test_print_accept "print upper(m_char_range_arr)" "'Z'"
+    test_print_accept "print upper(m_bool_range_arr)" "FALSE"
+    test_print_accept "print upper(m_long_range_arr)" "3211"
+    test_print_accept "print upper(m_range_arr)" "28"
+
+    # array locations
+    test_print_accept "print upper(v_arr)" "10";
+    test_print_accept "print upper(v_char_arr)" {'\^[(]255[)]'}
+    test_print_accept "print upper(v_bool_arr)" "TRUE"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print upper(v_int_arr)" "2147483647"
+    } else {
+	test_print_accept "print upper(v_int_arr)" "32767"
+    }
+    test_print_accept "print upper(v_set_arr)" "e6"
+    test_print_accept "print upper(v_set_range_arr)" "e5"
+    test_print_accept "print upper(v_numbered_set_arr)" "n5"
+    test_print_accept "print upper(v_char_range_arr)" "'Z'"
+    test_print_accept "print upper(v_bool_range_arr)" "FALSE"
+    test_print_accept "print upper(v_long_range_arr)" "3211"
+    test_print_accept "print upper(v_range_arr)" "28"
+}
+
+proc test_length {} {
+    global passcount
+
+    verbose "testing builtin LENGTH"
+    set passcount 0
+
+    # string locations
+    test_print_accept "print length(v_chars)" "20"
+    test_print_accept "print length(v_chars_v)" "7";
+    test_print_accept "print length(v_bits)" "10";
+
+    # string expressions
+    test_print_accept "print length(\"the quick brown fox ...\")" "23"
+    test_print_accept "print length(B'010101010101')" "12"
+    test_print_accept "print length(\"foo \" // \"bar\")" "7"
+
+    # check some failures
+    setup_xfail "*-*-*"
+    test_print_accept "print length(m_chars)" "typename in invalid context"
+    setup_xfail "*-*-*"
+    test_print_accept "print length(v_byte)" "bad argument to LENGTH builtin"
+    setup_xfail "*-*-*"
+    test_print_accept "print length(b'000000' // b'111111')" "12"
+}
+
+proc test_size {} {
+    global passcount
+
+    verbose "testing builtin SIZE"
+    set passcount 0
+
+    # modes
+    test_print_accept "print size(bool)" "1"
+    test_print_accept "print size(char)" "1"
+    test_print_accept "print size(byte)" "1"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print size(int)" "4"
+	test_print_accept "print size(ulong)" "8"
+	test_print_accept "print size(ptr)" "8"
+	test_print_accept "print size(m_chars_v)" "24"
+	test_print_accept "print size(m_struct)" "40"
+    } else {
+	test_print_accept "print size(int)" "2"
+	test_print_accept "print size(ulong)" "4"
+	test_print_accept "print size(ptr)" "4"
+	test_print_accept "print size(m_chars_v)" "22"
+	test_print_accept "print size(m_struct)" "36"
+    }
+    test_print_accept "print size(m_set)" "1"
+    test_print_accept "print size(m_numbered_set)" "1"
+    test_print_accept "print size(m_char_range)" "1"
+    test_print_accept "print size(m_range_arr)" "17"
+    test_print_accept "print size(m_chars)" "20"
+    test_print_accept "print size(m_bits)" "2"
+
+    # locations
+    test_print_accept "print size(v_bool)" "1"
+    test_print_accept "print size(v_char)" "1"
+    test_print_accept "print size(v_byte)" "1"
+    if [istarget "alpha-*-*"] then {
+	test_print_accept "print size(v_int)" "4"
+	test_print_accept "print size(v_ulong)" "8"
+	test_print_accept "print size(v_ptr)" "8"
+	test_print_accept "print size(v_chars_v)" "24"
+	test_print_accept "print size(v_struct)" "40"
+    } else {
+	test_print_accept "print size(v_int)" "2"
+	test_print_accept "print size(v_ulong)" "4"
+	test_print_accept "print size(v_ptr)" "4"
+	test_print_accept "print size(v_chars_v)" "22"
+	test_print_accept "print size(v_struct)" "36"
+    }
+    test_print_accept "print size(v_set)" "1"
+    test_print_accept "print size(v_numbered_set)" "1"
+    test_print_accept "print size(v_char_range)" "1"
+    test_print_accept "print size(v_range_arr)" "17"
+    test_print_accept "print size(v_chars)" "20"
+    test_print_accept "print size(v_bits)" "2"
+}
+
+proc test_num {} {
+    global passcount
+
+    verbose "testing builtin NUM"
+    set passcount 0
+
+    # constants
+    test_print_accept "print num(false)" "0"
+    test_print_accept "print num(true)" "1"
+    test_print_accept "print num(10)" "10"
+    test_print_accept "print num(33-34)" "-1"
+    test_print_accept "print num('X')" "88"
+    test_print_accept "print num(e5)" "4"
+
+    # locations
+    test_print_accept "print num(v_bool)" "0"
+    test_print_accept "print num(v_char)" "88"
+    test_print_accept "print num(v_byte)" "-30"
+    test_print_accept "print num(v_ubyte)" "30"
+    test_print_accept "print num(v_int)" "-333"
+    test_print_accept "print num(v_uint)" "333"
+    test_print_accept "print num(v_long)" "-4444"
+    test_print_accept "print num(v_ulong)" "4444"
+    test_print_accept "print num(v_set)" "2"
+    test_print_accept "print num(v_set_range)" "2"
+    test_print_accept "print num(v_numbered_set)" "35"
+    test_print_accept "print num(v_char_range)" "71"
+    test_print_accept "print num(v_long_range)" "1000"
+    test_print_accept "print num(v_range)" "23"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if [set_lang_chill] then {
+    # test builtins as described in chapter 6.20.3 Z.200
+    test_num
+    test_size
+    test_lower
+    test_upper
+    test_length
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/callch.ch b/gdb/testsuite/gdb.chill/callch.ch
new file mode 100644
index 0000000..6001d92
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/callch.ch
@@ -0,0 +1,50 @@
+hack : module
+
+dcl i int;
+newmode otto = array (bool, bool) byte;
+newmode str1 = struct (f1 int, f2 bool);
+newmode str2 = struct (f1 otto);
+
+dcl a otto := [[1,1],[1,1]];
+dcl b str1 := [10, false];
+dcl c str2;
+
+fred : proc (a int in, b int loc);
+  writetext(stdout, "a is '%C'; b is '%C'.%/", a, b);
+end fred;
+
+klaus : proc ();
+  writetext(stdout, "here's klaus calling.%/");
+end klaus;
+
+king : proc (p otto loc, x otto in);
+  dcl i, j bool;
+  p := [[h'ff,h'ff],[h'ff,h'ff]];
+  do for i:= lower(bool) to upper(bool);
+    do for j:= lower(bool) to upper(bool);
+      writetext(stdout, "x(%C, %C) = %C%..%/", i, j, x(i, j));
+      writetext(stdout, "p(%C, %C) = %C%..%/", i, j, p(i, j));
+    od;
+  od;
+end king;
+
+ralph : proc (x str1 in);
+  writetext(stdout, "x.f1 = %C, x.f2 = %C%..%/", x.f1, x.f2);
+end ralph;
+
+whitney : proc (x str2 in);
+  dcl i, j bool;
+
+  do for i:= lower(bool) to upper(bool);
+    do for j:= lower(bool) to upper(bool);
+      writetext(stdout, "x.f1(%C, %C) = %C%..%/", i, j, x.f1(i, j));
+     od;
+  od;
+
+end whitney;
+
+c := [a];
+i:=12;
+writetext(stdout, "done.%/");
+
+end hack;
diff --git a/gdb/testsuite/gdb.chill/callch.exp b/gdb/testsuite/gdb.chill/callch.exp
new file mode 100644
index 0000000..c579a05
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/callch.exp
@@ -0,0 +1,69 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests that gdb can call functions in a Chill inferior.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "callch"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language chill\n" ; 
+
+    gdb_test "break callch.ch:48" ""
+    send_gdb "run\n"; gdb_expect -re "Breakpoint .*callch.ch:48.*$gdb_prompt $"
+    gdb_test {set fred(10, i)} {a is '10'; b is '12'.}
+    gdb_test_exact "call klaus()" {here's klaus calling.}
+    gdb_test_exact "call fred()" {too few arguments in function call}
+    # Too many arguments are allowed
+    gdb_test_exact "call klaus(10, 20, 30)" {here's klaus calling.}
+    gdb_test "print a" { = \[\(FALSE:TRUE\): \[\(FALSE:TRUE\): 1\]\]}\
+	"print a before king"
+    # Current gdb prints 255 for the results that are expected to be -1.
+    setup_xfail "mips*-sgi-irix*"
+    gdb_test {call king(a, otto[[10, 15], [20, 25]])} "x\\(FALSE, FALSE\\) = 10.*p\\(FALSE, FALSE\\) = -1.*x\\(FALSE, TRUE\\) = 15.*p\\(FALSE, TRUE\\) = -1.*x\\(TRUE, FALSE\\) = 20.*p\\(TRUE, FALSE\\) = -1.*x\\(TRUE, TRUE\\) = 25.*p\\(TRUE, TRUE\\) = -1.*"
+    gdb_test "print a" { = \[\(FALSE:TRUE\): \[\(FALSE:TRUE\): -1\]\]}\
+	"print a after king"
+    gdb_test_exact "call ralph(b)" {x.f1 = 10, x.f2 = FALSE.}
+    gdb_test "call whitney(c)" "x.f1\\(FALSE, FALSE\\) = 1.*x.f1\\(FALSE, TRUE\\) = 1.*x.f1\\(TRUE, FALSE\\) = 1.*x.f1\\(TRUE, TRUE\\) = 1.*"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/chexp.exp b/gdb/testsuite/gdb.chill/chexp.exp
new file mode 100644
index 0000000..bed4aba
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/chexp.exp
@@ -0,0 +1,450 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+proc test_integer_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various decimal values.
+
+    gdb_test "p 123" " = 123"
+    gdb_test "p -123" " = -123"
+    gdb_test "p D'123" " = 123"
+    gdb_test "p d'123" " = 123"
+    gdb_test "p -D'123" " = -123"
+    gdb_test "p -d'123" " = -123"
+    gdb_test "p 12_345" " = 12345"
+    gdb_test "p __1_2_3__" " = 123"
+    gdb_test "p/d 123" " = D'123"
+
+    # Test various binary values.
+
+    gdb_test "p B'111" " = 7"
+    gdb_test "p b'111" " = 7"
+    gdb_test "p -B'111" " = -7"
+    gdb_test "p B'0111" " = 7"
+    gdb_test "p b'0111" " = 7"
+    gdb_test "p -b'0111" " = -7"
+    gdb_test "p B'_0_1_1_1_" " = 7"
+    gdb_test "p b'_0_1_1_1_" " = 7"
+    gdb_test "p -b'_0_1_1_1_" " = -7"
+    gdb_test "p/t B'111" " = B'111"
+
+    # Test various octal values.
+
+    gdb_test "p O'123" " = 83"
+    gdb_test "p o'123" " = 83"
+    gdb_test "p -o'0123" " = -83"
+    gdb_test "p O'0123" " = 83"
+    gdb_test "p o'0123" " = 83"
+    gdb_test "p -o'123" " = -83"
+    gdb_test "p O'_1_2_3_" " = 83"
+    gdb_test "p o'_1_2_3_" " = 83"
+    gdb_test "p -o'_1_2_3_" " = -83"
+    gdb_test "p/o O'123" " = O'123"
+
+    # Test various hexadecimal values.
+
+    gdb_test "p H'123" " = 291"
+    gdb_test "p h'123" " = 291"
+    gdb_test "p -h'123" " = -291"
+    gdb_test "p H'0123" " = 291"
+    gdb_test "p h'0123" " = 291"
+    gdb_test "p -h'0123" " = -291"
+    gdb_test "p H'_1_2_3_" " = 291"
+    gdb_test "p h'_1_2_3_" " = 291"
+    gdb_test "p -h'_1_2_3_" " = -291"
+    gdb_test "p H'ABC" " = 2748"
+    gdb_test "p H'abc" " = 2748"
+    gdb_test "p H'AbC" " = 2748"
+    gdb_test "p H'_A_b_C_" " = 2748"
+    gdb_test "p H'_D_e_F_" " = 3567"
+    gdb_test "p H'_d_E_f_" " = 3567"
+    gdb_test "p/x H'123" " = H'123"
+}
+
+proc test_character_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various decimal values.
+
+    gdb_test "p 'a'" " = 'a'"
+    gdb_test "p/x 'a'" " = H'61"
+    gdb_test "p/d 'a'" " = D'97"
+    gdb_test "p/t 'a'" " = B'1100001"
+    # gdb_test "p '^(97)'" " = 'a'"	(not in GNU Chill)
+    gdb_test "p C'61'" " = 'a'"
+    gdb_test "p c'61'" " = 'a'"
+    gdb_test "p/x C'FF'" " = H'ff"
+    # gdb_test "p/x '^(H'FF)'" " = H'ff"	(not in GNU Chill)
+    # gdb_test "p/x '^(D'255)'" " = H'ff"	(not in GNU Chill)
+}
+
+proc test_integer_literals_rejected {} {
+    global gdb_prompt
+
+    # These are valid integer literals in Z.200, but not GNU-Chill.
+
+    test_print_reject "p _"
+    test_print_reject "p __"
+
+    test_print_reject "p D'" 
+    test_print_reject "p D'_" 
+    test_print_reject "p D'__" 
+
+    test_print_reject "p B'" 
+    test_print_reject "p B'_" 
+    test_print_reject "p B'__" 
+
+    test_print_reject "p O'" 
+    test_print_reject "p O'_" 
+    test_print_reject "p O'__" 
+
+    test_print_reject "p H'" 
+    test_print_reject "p H'_" 
+    test_print_reject "p H'__" 
+
+    # Test various decimal values.
+
+    test_print_reject "p D'DEADBEEF"
+    test_print_reject "p D'123DEADBEEF"
+
+    # Test various binary values.
+
+    test_print_reject "p B'2" "Too-large digit in bitstring or integer."
+    test_print_reject "p B'12"  "Too-large digit in bitstring or integer."
+
+    # Test various octal values.
+
+    test_print_reject "p O'9"  "Too-large digit in bitstring or integer."
+    test_print_reject "p O'79"  "Too-large digit in bitstring or integer."
+
+    # Test various hexadecimal values.
+
+    test_print_reject "p H'G" "Invalid character in bitstring or integer."
+    test_print_reject "p H'AG" "Invalid character in bitstring or integer."
+}
+
+proc test_boolean_literals_accepted {} {
+    global gdb_prompt
+
+    # Test the only possible values for a boolean, TRUE and FALSE.
+
+    gdb_test "p TRUE" " = TRUE"
+    gdb_test "p FALSE" " = FALSE"
+}
+
+proc test_float_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various floating point formats
+
+    gdb_test "p .44 < .45" " = TRUE"
+    gdb_test "p .44 > .45" " = FALSE"
+    gdb_test "p 0.44 < 0.45" " = TRUE"
+    gdb_test "p 0.44 > 0.45" " = FALSE"
+    gdb_test "p 44. < 45." " = TRUE"
+    gdb_test "p 44. > 45." " = FALSE"
+    gdb_test "p 44.0 < 45.0" " = TRUE"
+    gdb_test "p 44.0 > 45.0" " = FALSE"
+    gdb_test "p 10D20 < 10D21" " = TRUE"
+    gdb_test "p 10D20 > 10D21" " = FALSE"
+    gdb_test "p 10d20 < 10d21" " = TRUE"
+    gdb_test "p 10d20 > 10d21" " = FALSE"
+    gdb_test "p 10E20 < 10E21" " = TRUE"
+    gdb_test "p 10E20 > 10E21" " = FALSE"
+    gdb_test "p 10e20 < 10e21" " = TRUE"
+    gdb_test "p 10e20 > 10e21" " = FALSE"
+    gdb_test "p 10.D20 < 10.D21" " = TRUE"
+    gdb_test "p 10.D20 > 10.D21" " = FALSE"
+    gdb_test "p 10.d20 < 10.d21" " = TRUE"
+    gdb_test "p 10.d20 > 10.d21" " = FALSE"
+    gdb_test "p 10.E20 < 10.E21" " = TRUE"
+    gdb_test "p 10.E20 > 10.E21" " = FALSE"
+    gdb_test "p 10.e20 < 10.e21" " = TRUE"
+    gdb_test "p 10.e20 > 10.e21" " = FALSE"
+    gdb_test "p 10.0D20 < 10.0D21" " = TRUE"
+    gdb_test "p 10.0D20 > 10.0D21" " = FALSE"
+    gdb_test "p 10.0d20 < 10.0d21" " = TRUE"
+    gdb_test "p 10.0d20 > 10.0d21" " = FALSE"
+    gdb_test "p 10.0E20 < 10.0E21" " = TRUE"
+    gdb_test "p 10.0E20 > 10.0E21" " = FALSE"
+    gdb_test "p 10.0e20 < 10.0e21" " = TRUE"
+    gdb_test "p 10.0e20 > 10.0e21" " = FALSE"
+    gdb_test "p 10.0D+20 < 10.0D+21" " = TRUE"
+    gdb_test "p 10.0D+20 > 10.0D+21" " = FALSE"
+    gdb_test "p 10.0d+20 < 10.0d+21" " = TRUE"
+    gdb_test "p 10.0d+20 > 10.0d+21" " = FALSE"
+    gdb_test "p 10.0E+20 < 10.0E+21" " = TRUE"
+    gdb_test "p 10.0E+20 > 10.0E+21" " = FALSE"
+    gdb_test "p 10.0e+20 < 10.0e+21" " = TRUE"
+    gdb_test "p 10.0e+20 > 10.0e+21" " = FALSE"
+    gdb_test "p 10.0D-11 < 10.0D-10" " = TRUE"
+    gdb_test "p 10.0D-11 > 10.0D-10" " = FALSE"
+    gdb_test "p 10.0d-11 < 10.0d-10" " = TRUE"
+    gdb_test "p 10.0d-11 > 10.0d-10" " = FALSE"
+    gdb_test "p 10.0E-11 < 10.0E-10" " = TRUE"
+    gdb_test "p 10.0E-11 > 10.0E-10" " = FALSE"
+    gdb_test "p 10.0e-11 < 10.0e-10" " = TRUE"
+    gdb_test "p 10.0e-11 > 10.0e-10" " = FALSE"
+    # looks funny, but apparently legal
+    gdb_test "p _.1e+10 < _.1e+11" " = TRUE"
+    gdb_test "p _.1e+10 > _.1e+11" " = FALSE"
+    gdb_test "p __.1e-12 < __.1e-11" " = TRUE"
+    gdb_test "p __.1e-12 > __.1e-11" " = FALSE"
+}
+
+proc test_convenience_variables {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo := 101"	" := 101\[\r\]*" \
+	"Set a new convenience variable"
+
+    gdb_test "print \$foo"		" = 101" \
+	"Print contents of new convenience variable"
+
+    gdb_test "set \$foo := 301"	" := 301\[\r\]*" \
+	"Set convenience variable to a new value"
+
+    gdb_test "print \$foo"		" = 301" \
+	"Print new contents of convenience variable"
+
+    gdb_test "set \$_ := 11"		" := 11\[\r\]*" \
+	"Set convenience variable \$_"
+
+    gdb_test "print \$_"		" = 11" \
+	"Print contents of convenience variable \$_"
+
+    gdb_test "print \$foo + 10"	" = 311" \
+	"Use convenience variable in arithmetic expression"
+
+    gdb_test "print (\$foo := 32) + 4"	" = 36" \
+	"Use convenience variable assignment in arithmetic expression"
+
+    gdb_test "print \$bar"		" = void" \
+	"Print contents of uninitialized convenience variable"
+}
+
+proc test_value_history {} {
+    global gdb_prompt
+
+    gdb_test "print 101"	"\\\$1 = 101" \
+	"Set value-history\[1\] using \$1"
+
+    gdb_test "print 102" 	"\\\$2 = 102" \
+	"Set value-history\[2\] using \$2"
+
+    gdb_test "print 103"	"\\\$3 = 103" \
+	"Set value-history\[3\] using \$3"
+
+    gdb_test "print \$\$"	"\\\$4 = 102" \
+	"Print value-history\[MAX-1\] using inplicit index \$\$"
+
+    gdb_test "print \$\$"	"\\\$5 = 103" \
+	"Print value-history\[MAX-1\] again using implicit index \$\$"
+
+    gdb_test "print \$"	"\\\$6 = 103" \
+	"Print value-history\[MAX\] using implicit index \$"
+
+    gdb_test "print \$\$2"	"\\\$7 = 102" \
+	"Print value-history\[MAX-2\] using explicit index \$\$2"
+
+    gdb_test "print \$0"	"\\\$8 = 102" \
+	"Print value-history\[MAX\] using explicit index \$0"
+
+    gdb_test "print 108"	"\\\$9 = 108" ""
+
+    gdb_test "print \$\$0"	"\\\$10 = 108" \
+	"Print value-history\[MAX\] using explicit index \$\$0"
+
+    gdb_test "print \$1"	"\\\$11 = 101" \
+	"Print value-history\[1\] using explicit index \$1"
+
+    gdb_test "print \$2"	"\\\$12 = 102" \
+	"Print value-history\[2\] using explicit index \$2"
+
+    gdb_test "print \$3"	"\\\$13 = 103" \
+	"Print value-history\[3\] using explicit index \$3"
+
+    gdb_test "print \$-3"	"\\\$14 = 100" \
+	"Print (value-history\[MAX\] - 3) using implicit index \$"
+
+    gdb_test "print \$1 + 3"	"\\\$15 = 104" \
+	"Use value-history element in arithmetic expression"
+}
+
+proc test_arithmetic_expressions {} {
+    global gdb_prompt
+
+    # Test unary minus with various operands
+
+#    gdb_test "p -(TRUE)"	" = -1"	"unary minus applied to bool"
+#    gdb_test "p -('a')"	" = xxx"	"unary minus applied to char"
+    gdb_test "p -(1)"		" = -1"	"unary minus applied to int"
+    gdb_test "p -(1.0)"	" = -1"	"unary minus applied to real"
+
+    # Test addition with various operands
+
+    gdb_test "p TRUE + 1"	" = 2"	"bool plus int"
+    gdb_test "p 'a' + 1"	" = 98"	"char plus int"
+    gdb_test "p 1 + 1"		" = 2"	"int plus int"
+    gdb_test "p 1.0 + 1"	" = 2"	"real plus int"
+    gdb_test "p 1.0 + 2.0"	" = 3"	"real plus real"
+
+    # Test subtraction with various operands
+
+    gdb_test "p TRUE - 1"	" = 0"	"bool minus int"
+    gdb_test "p 'b' - 1"	" = 97"	"char minus int"
+    gdb_test "p 3 - 1"		" = 2"	"int minus int"
+    gdb_test "p 3.0 - 1"	" = 2"	"real minus int"
+    gdb_test "p 5.0 - 2.0"	" = 3"	"real minus real"
+
+    # Test multiplication with various operands
+
+    gdb_test "p TRUE * 1"	" = 1"	"bool times int"
+    gdb_test "p 'a' * 2"	" = 194"	"char times int"
+    gdb_test "p 2 * 3"		" = 6"	"int times int"
+    gdb_test "p 2.0 * 3"	" = 6"	"real times int"
+    gdb_test "p 2.0 * 3.0"	" = 6"	"real times real"
+
+    # Test division with various operands
+
+    gdb_test "p TRUE / 1"	" = 1"	"bool divided by int"
+    gdb_test "p 'a' / 2"	" = 48"	"char divided by int"
+    gdb_test "p 6 / 3"		" = 2"	"int divided by int"
+    gdb_test "p 6.0 / 3"	" = 2"	"real divided by int"
+    gdb_test "p 6.0 / 3.0"	" = 2"	"real divided by real"
+
+    # Test modulo with various operands
+
+    gdb_test "p TRUE MOD 1"	" = 0"	"bool modulo int"
+    gdb_test "p 'a' MOD 2"	" = 1"	"char modulo int"
+    gdb_test "p -5 MOD 3"	" = 1"	"negative int modulo int"
+    gdb_test "p 5 MOD 1"	" = 0"	"int modulo int"
+    gdb_test "p 5 MOD 2"	" = 1"	"int modulo int"
+    gdb_test "p 5 MOD 3"	" = 2"	"int modulo int"
+    gdb_test "p 5 MOD 4"	" = 1"	"int modulo int"
+    gdb_test "p 5 MOD 5"	" = 0"	"int modulo int"
+    gdb_test "p 0 MOD 1"	" = 0"	"int modulo int"
+    gdb_test "p 0 MOD 2"	" = 0"	"int modulo int"
+    gdb_test "p 0 MOD 3"	" = 0"	"int modulo int"
+    gdb_test "p 0 MOD 4"	" = 0"	"int modulo int"
+    gdb_test "p -5 MOD 1"	" = 0"	"int modulo int"
+    gdb_test "p -5 MOD 2"	" = 1"	"int modulo int"
+    gdb_test "p -5 MOD 3"	" = 1"	"int modulo int"
+    gdb_test "p -5 MOD 4"	" = 3"	"int modulo int"
+    gdb_test "p -5 MOD 5"	" = 0"	"int modulo int"
+    gdb_test "p -5 MOD 5"	" = 0"	"int modulo int"
+    test_print_reject "p 6.0 MOD 3" \
+	"Integer-only operation on floating point number.*"
+    test_print_reject "p 6.0 MOD 3.0" \
+	"Integer-only operation on floating point number.*"
+    test_print_reject "p -5 MOD -1" \
+	"Second operand of MOD must be greater than zero.*"
+    test_print_reject "p -5 MOD 0" \
+	"Second operand of MOD must be greater than zero.*"
+
+    # Test remainder with various operands
+
+    gdb_test "p TRUE REM 1"	" = 0"	"bool remainder int"
+    gdb_test "p 'a' REM 2"	" = 1"	"char remainder int"
+    gdb_test "p 5 REM 5"	" = 0"	"int remainder int"
+    gdb_test "p 5 REM 4"	" = 1"	"int remainder int"
+    gdb_test "p 5 REM 3"	" = 2"	"int remainder int"
+    gdb_test "p 5 REM 2"	" = 1"	"int remainder int"
+    gdb_test "p 5 REM 1"	" = 0"	"int remainder int"
+    gdb_test "p 5 REM -1"	" = 0"	"int remainder int"
+    gdb_test "p 5 REM -2"	" = 1"	"int remainder int"
+    gdb_test "p 5 REM -3"	" = 2"	"int remainder int"
+    gdb_test "p 5 REM -4"	" = 1"	"int remainder int"
+    gdb_test "p 5 REM -5"	" = 0"	"int remainder int"
+    gdb_test "p -5 REM 5"	" = 0"	"int remainder int"
+    gdb_test "p -5 REM 4"	" = -1"	"int remainder int"
+    gdb_test "p -5 REM 3"	" = -2"	"int remainder int"
+    gdb_test "p -5 REM 2"	" = -1"	"int remainder int"
+    gdb_test "p -5 REM 1"	" = 0"	"int remainder int"
+    gdb_test "p -5 REM -1"	" = 0"	"int remainder int"
+    gdb_test "p -5 REM -2"	" = -1"	"int remainder int"
+    gdb_test "p -5 REM -3"	" = -2"	"int remainder int"
+    gdb_test "p -5 REM -4"	" = -1"	"int remainder int"
+    gdb_test "p -5 REM -5"	" = 0"	"int remainder int"
+    gdb_test "p 6 REM 3"	" = 0"	"int remainder int"
+    test_print_reject "p 6.0 REM 3" \
+	"Integer-only operation on floating point number.*"
+    test_print_reject "p 6.0 REM 3.0" \
+	"Integer-only operation on floating point number.*"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ""
+
+if [set_lang_chill] then {
+    test_value_history
+    test_convenience_variables
+    test_integer_literals_accepted
+    test_integer_literals_rejected
+    test_boolean_literals_accepted
+    test_character_literals_accepted
+    test_float_literals_accepted
+    test_arithmetic_expressions
+} else {
+    warning "$test_name tests suppressed." 0
+}
diff --git a/gdb/testsuite/gdb.chill/chillvars.ch b/gdb/testsuite/gdb.chill/chillvars.ch
new file mode 100644
index 0000000..21dfcba
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/chillvars.ch
@@ -0,0 +1,204 @@
+testvars: MODULE
+
+DCL bool_true BOOL INIT := TRUE;
+DCL bool_false BOOL INIT := FALSE;
+DCL booltable1 ARRAY (0:3) BOOL INIT := [ TRUE, FALSE, FALSE, TRUE ];
+DCL booltable2 ARRAY (4:7) BOOL INIT := [ TRUE, FALSE, FALSE, TRUE ];
+
+DCL control_char CHAR INIT := C'07';
+DCL printable_char CHAR INIT := 'a';
+DCL chartable1 ARRAY (0:2) CHAR INIT := [ C'00', C'01', C'02' ];
+DCL chartable2 ARRAY (3:5) CHAR INIT := [ C'00', C'01', C'02' ];
+
+DCL string1 CHARS (4) INIT := 'abcd';
+DCL string2 CHARS (5) INIT := 'ef' // C'00' // 'gh';
+DCL string3 CHARS (6) INIT := 'ef' // 'gh' // 'ij';
+DCL string4 CHARS (7) INIT := (6) 'z' // C'00';
+
+DCL byte_low BYTE INIT := -128;
+DCL byte_high BYTE INIT := 127;
+DCL bytetable1 ARRAY (0:4) BYTE INIT := [ -2, -1, 0, 1, 2 ];
+DCL bytetable2 ARRAY (5:9) BYTE INIT := [ -2, -1, 0, 1, 2 ];
+DCL bytetable3 ARRAY (1:2,'c':'d',FALSE:TRUE) BYTE
+	INIT := [ [ [ 0, 1 ], [ 2, 3 ] ], [ [ 4, 5 ], [ 6, 7 ] ] ];
+DCL bytetable4 ARRAY (1:2) ARRAY ('c':'d') ARRAY (FALSE:TRUE) BYTE
+	INIT := [ [ [ 0, 1 ], [ 2, 3 ] ], [ [ 4, 5 ], [ 6, 7 ] ] ];
+
+DCL ubyte_low UBYTE INIT := 0;
+DCL ubyte_high UBYTE INIT := 255;
+DCL ubytetable1 ARRAY (0:4) UBYTE INIT := [ 0, 1, 2, 3, 4 ];
+DCL ubytetable2 ARRAY (5:9) UBYTE INIT := [ 0, 1, 2, 3, 4 ];
+
+DCL int_low INT INIT := -32_768;
+DCL int_high INT INIT := 32_767;
+DCL inttable1 ARRAY (0:4) INT INIT := [ -2, -1, 0, 1, 2 ];
+DCL inttable2 ARRAY (5:9) INT INIT := [ -2, -1, 0, 1, 2 ];
+
+DCL uint_low UINT INIT := 0;
+DCL uint_high UINT INIT := 65_535;
+DCL uinttable1 ARRAY (0:4) UINT INIT := [ 0, 1, 2, 3, 4 ];
+DCL uinttable2 ARRAY (5:9) UINT INIT := [ 0, 1, 2, 3, 4 ];
+
+DCL long_low LONG INIT := -2_147_483_648;
+DCL long_high LONG INIT := 2_147_483_647;
+DCL longtable1 ARRAY (0:4) LONG INIT := [ -2, -1, 0, 1, 2 ];
+DCL longtable2 ARRAY (5:9) LONG INIT := [ -2, -1, 0, 1, 2 ];
+
+DCL ulong_low ULONG INIT := 0;
+DCL ulong_high ULONG INIT := 4_294_967_295;
+DCL ulongtable1 ARRAY (0:4) ULONG INIT := [ 0, 1, 2, 3, 4 ];
+DCL ulongtable2 ARRAY (5:9) ULONG INIT := [ 0, 1, 2, 3, 4 ];
+
+DCL real1 FLOAT INIT := 3.14159265358;
+DCL real2 FLOAT INIT := -3.14159265358;
+DCL realtable1 ARRAY (0:4) FLOAT INIT := [ -2.0, -1.0, 0.0, 1.0, 2.0 ];
+DCL realtable2 ARRAY (5:9) FLOAT INIT := [ -2.0, -1.0, 0.0, 1.0, 2.0 ];
+
+DCL long_real1 DOUBLE INIT := 3.14e300;
+DCL long_real2 DOUBLE INIT := -3.14e-300;
+DCL longrealtable1 ARRAY (0:4) DOUBLE INIT := [ -2.0, -1.0, 0.0, 1.0, 2.0 ];
+DCL longrealtable2 ARRAY (5:9) DOUBLE INIT := [ -2.0, -1.0, 0.0, 1.0, 2.0 ];
+
+/* DCL powerset1 POWERSET INT(0:7);*/
+/* DCL chars1 CHAR (16) INIT := (16)'b'; */
+/* DCL bits1 BIT(20) := B'11111111000010101011'; */
+
+NEWMODE simple_struct = STRUCT (abool BOOL, aint INT, astring CHARS (8));
+DCL struct1 simple_struct := [ TRUE, 123, "a string" ];
+
+NEWMODE nested_struct = STRUCT (abool BOOL, nstruct simple_struct, aint INT);
+DCL struct2 nested_struct := [ TRUE, [ FALSE, 456, "deadbeef" ], 789 ];
+
+/* This table is used as a source for every ascii character. */
+
+DCL asciitable ARRAY (0:255) CHAR INIT := [
+    C'00', C'01', C'02', C'03', C'04', C'05', C'06', C'07',
+    C'08', C'09', C'0a', C'0b', C'0c', C'0d', C'0e', C'0f',
+    C'10', C'11', C'12', C'13', C'14', C'15', C'16', C'17',
+    C'18', C'19', C'1a', C'1b', C'1c', C'1d', C'1e', C'1f',
+    C'20', C'21', C'22', C'23', C'24', C'25', C'26', C'27',
+    C'28', C'29', C'2a', C'2b', C'2c', C'2d', C'2e', C'2f',
+    C'30', C'31', C'32', C'33', C'34', C'35', C'36', C'37',
+    C'38', C'39', C'3a', C'3b', C'3c', C'3d', C'3e', C'3f',
+    C'40', C'41', C'42', C'43', C'44', C'45', C'46', C'47',
+    C'48', C'49', C'4a', C'4b', C'4c', C'4d', C'4e', C'4f',
+    C'50', C'51', C'52', C'53', C'54', C'55', C'56', C'57',
+    C'58', C'59', C'5a', C'5b', C'5c', C'5d', C'5e', C'5f',
+    C'60', C'61', C'62', C'63', C'64', C'65', C'66', C'67',
+    C'68', C'69', C'6a', C'6b', C'6c', C'6d', C'6e', C'6f',
+    C'70', C'71', C'72', C'73', C'74', C'75', C'76', C'77',
+    C'78', C'79', C'7a', C'7b', C'7c', C'7d', C'7e', C'7f',
+    C'80', C'81', C'82', C'83', C'84', C'85', C'86', C'87',
+    C'88', C'89', C'8a', C'8b', C'8c', C'8d', C'8e', C'8f',
+    C'90', C'91', C'92', C'93', C'94', C'95', C'96', C'97',
+    C'98', C'99', C'9a', C'9b', C'9c', C'9d', C'9e', C'9f',
+    C'a0', C'a1', C'a2', C'a3', C'a4', C'a5', C'a6', C'a7',
+    C'a8', C'a9', C'aa', C'ab', C'ac', C'ad', C'ae', C'af',
+    C'b0', C'b1', C'b2', C'b3', C'b4', C'b5', C'b6', C'b7',
+    C'b8', C'b9', C'ba', C'bb', C'bc', C'bd', C'be', C'bf',
+    C'c0', C'c1', C'c2', C'c3', C'c4', C'c5', C'c6', C'c7',
+    C'c8', C'c9', C'ca', C'cb', C'cc', C'cd', C'ce', C'cf',
+    C'd0', C'd1', C'd2', C'd3', C'd4', C'd5', C'd6', C'd7',
+    C'd8', C'd9', C'da', C'db', C'dc', C'dd', C'de', C'df',
+    C'e0', C'e1', C'e2', C'e3', C'e4', C'e5', C'e6', C'e7',
+    C'e8', C'e9', C'ea', C'eb', C'ec', C'ed', C'ee', C'ef',
+    C'f0', C'f1', C'f2', C'f3', C'f4', C'f5', C'f6', C'f7',
+    C'f8', C'f9', C'fa', C'fb', C'fc', C'fd', C'fe', C'ff'
+];
+
+DCL charmatrix ARRAY (0:255) CHAR INIT := [
+  'a','X','X','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','X','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','X','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','X','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','X','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','X','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','X','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','X','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','X','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','X','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','X','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','X','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','X','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','X','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','a','X',
+  'a','a','a','a','a','a','a','a','a','a','a','a','a','a','a','a'
+];
+
+DCL xptr PTR INIT := ->int_high;
+
+booleans: PROC ();
+
+	DCL val1 BOOL := TRUE;
+	DCL val2 BOOL := FALSE;
+	DCL val3 BOOL := TRUE;
+
+	val1 := TRUE XOR TRUE;
+	val1 := TRUE XOR FALSE;
+	val1 := FALSE XOR TRUE;
+	val1 := FALSE XOR FALSE;
+	val1 := val2 XOR val3;
+
+	val1 := TRUE AND TRUE;
+	val1 := TRUE AND FALSE;
+	val1 := FALSE AND TRUE;
+	val1 := FALSE AND FALSE;
+	val1 := val2 AND val3;
+
+	val1 := TRUE ANDIF TRUE;
+	val1 := TRUE ANDIF FALSE;
+	val1 := FALSE ANDIF TRUE;
+	val1 := FALSE ANDIF FALSE;
+	val1 := val2 ANDIF val3;
+
+	val1 := TRUE OR TRUE;
+	val1 := TRUE OR FALSE;
+	val1 := FALSE OR TRUE;
+	val1 := FALSE OR FALSE;
+	val1 := val2 OR val3;
+
+--	val1 := NOT TRUE;
+--	val1 := NOT FALSE;
+--	val1 := NOT val2;
+--	val1 := NOT val3;
+	
+END booleans;
+
+scalar_arithmetic: PROC ();
+
+	DCL val1 INT := 1;
+	DCL val2 INT := 2;
+	DCL val3 INT := 3;
+
+	val1 := -val2;
+	val1 := val2 + val3;
+	val1 := val2 - val3;
+	val1 := val2 * val3;
+	val1 := val2 / val3;
+	val1 := val2 MOD val3;
+	val1 := val2 REM val3;
+	
+END scalar_arithmetic;
+
+write_arrays: PROC ();
+
+	inttable1(0) := 0;
+	inttable1(1) := 1;
+	inttable1(2) := 2;
+	inttable1(3) := 3;
+	inttable1(4) := 4;
+	inttable2(5) := 5;
+	inttable2(6) := 6;
+	inttable2(7) := 7;
+	inttable2(8) := 8;
+	inttable2(9) := 9;
+
+END write_arrays;
+
+uint_low := 0;
+
+scalar_arithmetic ();
+write_arrays ();
+booleans ();
+
+END;
diff --git a/gdb/testsuite/gdb.chill/chillvars.exp b/gdb/testsuite/gdb.chill/chillvars.exp
new file mode 100644
index 0000000..f37c94d
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/chillvars.exp
@@ -0,0 +1,316 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "chillvars"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    # This is needed (at least on SunOS4) to make sure the
+    # the symbol table is read.
+    gdb_test "break chillvars.ch:3" ""
+    gdb_test "delete 1" ""
+
+    gdb_test "set width 0" ""
+    gdb_test "set print sevenbit-strings" ""
+    gdb_test "set print address off" ""
+
+    test_BOOL
+    test_CHAR
+    test_BYTE
+    test_UBYTE
+    test_INT
+    test_UINT
+    test_LONG
+    test_ULONG
+    test_REAL
+    test_LONG_REAL
+    test_POWERSET
+    test_arrays
+    test_strings
+    test_structs
+
+    test_ptr
+}
+
+proc test_BOOL {} {
+
+    gdb_test "ptype bool_true"		"type = (BOOL|bool)"
+    gdb_test "ptype bool_false"		"type = (BOOL|bool)"
+    gdb_test "whatis bool_true"		"type = (BOOL|bool)"
+    gdb_test "whatis bool_false"	"type = (BOOL|bool)"
+    gdb_test "print bool_false"		" = FALSE"
+    gdb_test "print bool_true"		" = TRUE"
+
+}
+
+proc test_CHAR {} {
+    gdb_test "ptype control_char"	"type = (CHAR|char)"
+    gdb_test "whatis control_char"	"type = (CHAR|char)"
+    gdb_test "print control_char"	{ = '\^[(]7[)]'}
+    gdb_test "ptype printable_char"	"type = (CHAR|char)"
+    gdb_test "whatis printable_char"	"type = (CHAR|char)"
+    gdb_test "print printable_char"	" = 'a'"
+
+    gdb_test "print lower(char)"	{ = '\^[(]0[)]'}
+    gdb_test "print upper(char)"	{ = '\^[(]255[)]'}
+}
+
+proc test_BYTE {} {
+    gdb_test "ptype byte_low"		"type = (BYTE|byte)"
+    gdb_test "whatis byte_low"		"type = (BYTE|byte)"
+    gdb_test "print byte_low"		" = -128"
+    gdb_test "ptype byte_high"		"type = (BYTE|byte)"
+    gdb_test "whatis byte_high"		"type = (BYTE|byte)"
+    gdb_test "print byte_high"		" = 127"
+
+    gdb_test "print lower(byte)"	" = -128"
+    gdb_test "print upper(byte)"	" = 127"
+    gdb_test "print lower(byte_high)"	" = -128"
+    gdb_test "print upper(byte_high)"	" = 127"
+}
+
+proc test_UBYTE {} {
+    gdb_test "ptype ubyte_low"		"type = (UBYTE|ubyte)"
+    gdb_test "whatis ubyte_low"		"type = (UBYTE|ubyte)"
+    gdb_test "print ubyte_low"		" = 0"
+    gdb_test "ptype ubyte_high"		"type = (UBYTE|ubyte)"
+    gdb_test "whatis ubyte_high"	"type = (UBYTE|ubyte)"
+    gdb_test "print ubyte_high"		" = 255"
+}
+
+proc test_INT {} {
+    gdb_test "ptype int_low"		"type = (INT|int)"
+    gdb_test "whatis int_low"		"type = (INT|int)"
+    gdb_test "print int_low"		" = -32768"
+    gdb_test "ptype int_high"		"type = (INT|int)"
+    gdb_test "whatis int_high"		"type = (INT|int)"
+    gdb_test "print int_high"		" = 32767"
+}
+
+proc test_UINT {} {
+    gdb_test "ptype uint_low"		"type = (UINT|uint)"
+    gdb_test "whatis uint_low"		"type = (UINT|uint)"
+    gdb_test "print uint_low"		" = 0"
+    gdb_test "ptype uint_high"		"type = (UINT|uint)"
+    gdb_test "whatis uint_high"		"type = (UINT|uint)"
+    gdb_test "print uint_high"		" = 65535"
+}
+
+proc test_LONG {} {
+    gdb_test "ptype long_low"		"type = (LONG|long)"
+    gdb_test "whatis long_low"		"type = (LONG|long)"
+    gdb_test "print long_low"		" = -2147483648"
+    gdb_test "ptype long_high"		"type = (LONG|long)"
+    gdb_test "whatis long_high"		"type = (LONG|long)"
+    gdb_test "print long_high"		" = 2147483647"
+}
+
+proc test_ULONG {} {
+    gdb_test "ptype ulong_low"		"type = (ULONG|ulong)"
+    gdb_test "whatis ulong_low"		"type = (ULONG|ulong)"
+    gdb_test "print ulong_low"		" = 0"
+    gdb_test "ptype ulong_high"		"type = (ULONG|ulong)"
+    gdb_test "whatis ulong_high"	"type = (ULONG|ulong)"
+    gdb_test "print ulong_high"		" = 4294967295"
+}
+
+proc test_REAL {} {
+    gdb_test "ptype real1"		"type = (FLOAT|float)"
+    gdb_test "whatis real1"		"type = (FLOAT|float)"
+    gdb_test "print real1"		" = 3.14159274"
+}
+
+proc test_LONG_REAL {} {
+    gdb_test "ptype long_real1"		"type = (DOUBLE|double)"
+    gdb_test "whatis long_real1"	"type = (DOUBLE|double)"
+    gdb_test "print long_real1"		" = 3\\.1400000000000001e\\+300"
+}
+
+proc test_POWERSET {} {
+}
+
+proc test_arrays {} {
+    gdb_test "ptype booltable1"		"type = ARRAY \\(+0:3\\)+ (BOOL|bool)"
+    gdb_test_exact "print booltable1"	\
+	{ = [(0): TRUE, (1:2): FALSE, (3): TRUE]}
+
+    gdb_test "ptype booltable2"		"type = ARRAY \\(+4:7\\)+ (BOOL|bool)"
+    gdb_test_exact "print booltable2" { = [(4): TRUE, (5:6): FALSE, (7): TRUE]}
+
+    gdb_test "ptype chartable1"		"type = ARRAY \\(+0:2\\)+ (CHAR|char)"
+    gdb_test_exact "print chartable1"  {= [(0): '^(0)', (1): '^(1)', (2): '^(2)']}
+
+    gdb_test "ptype chartable2"		"type = ARRAY \\(+3:5\\)+ (CHAR|char)"
+    gdb_test_exact "print chartable2"	\
+	{= [(3): '^(0)', (4): '^(1)', (5): '^(2)']}
+
+    gdb_test "ptype bytetable1"		"type = ARRAY \\(+0:4\\)+ (BYTE|byte)"
+    gdb_test_exact "print bytetable1"		\
+       {= [(0): -2, (1): -1, (2): 0, (3): 1, (4): 2]}
+
+    gdb_test "ptype bytetable2"		"type = ARRAY \\(+5:9\\)+ (BYTE|byte)"
+    gdb_test_exact "print bytetable2"	\
+	{= [(5): -2, (6): -1, (7): 0, (8): 1, (9): 2]}
+
+    gdb_test "ptype bytetable3" \
+	"type = ARRAY \\(1:2\\) ARRAY \\('c':'d'\\) ARRAY \\(FALSE:TRUE\\) (BYTE|byte)"
+    gdb_test_exact "print bytetable3" \
+    {= [(1): [('c'): [(FALSE): 0, (TRUE): 1], ('d'): [(FALSE): 2, (TRUE): 3]], (2): [('c'): [(FALSE): 4, (TRUE): 5], ('d'): [(FALSE): 6, (TRUE): 7]]]}
+    gdb_test "ptype bytetable4" \
+	"type = ARRAY \\(1:2\\) ARRAY \\('c':'d'\\) ARRAY \\(FALSE:TRUE\\) (BYTE|byte)"
+    gdb_test_exact "print bytetable4" \
+    {= [(1): [('c'): [(FALSE): 0, (TRUE): 1], ('d'): [(FALSE): 2, (TRUE): 3]], (2): [('c'): [(FALSE): 4, (TRUE): 5], ('d'): [(FALSE): 6, (TRUE): 7]]]}
+
+    gdb_test "ptype ubytetable1"	"type = ARRAY \\(+0:4\\)+ (UBYTE|ubyte)"
+    gdb_test_exact "print ubytetable1"	\
+	{= [(0): 0, (1): 1, (2): 2, (3): 3, (4): 4]}
+
+    gdb_test "ptype ubytetable2"	"type = ARRAY \\(+5:9\\)+ (UBYTE|ubyte)"
+    gdb_test_exact "print ubytetable2"	\
+	{= [(5): 0, (6): 1, (7): 2, (8): 3, (9): 4]}
+
+    gdb_test "ptype inttable1"		"type = ARRAY \\(+0:4\\)+ (INT|int)"
+    gdb_test_exact "print inttable1"	\
+	{= [(0): -2, (1): -1, (2): 0, (3): 1, (4): 2]}
+
+    gdb_test "ptype inttable2"		"type = ARRAY \\(+5:9\\)+ (INT|int)"
+    gdb_test_exact "print inttable2"		\
+	{= [(5): -2, (6): -1, (7): 0, (8): 1, (9): 2]}
+
+    gdb_test "ptype uinttable1"		"type = ARRAY \\(+0:4\\)+ (UINT|uint)"
+    gdb_test_exact "print uinttable1"	\
+	{= [(0): 0, (1): 1, (2): 2, (3): 3, (4): 4]}
+
+    gdb_test "ptype uinttable2"		"type = ARRAY \\(+5:9\\)+ (UINT|uint)"
+    gdb_test_exact "print uinttable2"	\
+	{= [(5): 0, (6): 1, (7): 2, (8): 3, (9): 4]}
+
+    gdb_test "ptype longtable1"		"type = ARRAY \\(+0:4\\)+ (LONG|long)"
+    gdb_test_exact "print longtable1"	\
+	{= [(0): -2, (1): -1, (2): 0, (3): 1, (4): 2]}
+
+    gdb_test "ptype longtable2"		"type = ARRAY \\(+5:9\\)+ (LONG|long)"
+    gdb_test_exact "print longtable2"	\
+	{= [(5): -2, (6): -1, (7): 0, (8): 1, (9): 2]}
+
+    gdb_test "ptype ulongtable1"	"type = ARRAY \\(+0:4\\)+ (ULONG|ulong)"
+    gdb_test_exact "print ulongtable1"	\
+	{= [(0): 0, (1): 1, (2): 2, (3): 3, (4): 4]}
+
+    gdb_test "ptype ulongtable2"	"type = ARRAY \\(+5:9\\)+ (ULONG|ulong)"
+    gdb_test_exact "print ulongtable2"	\
+	{= [(5): 0, (6): 1, (7): 2, (8): 3, (9): 4]}
+
+    gdb_test "ptype realtable1"		"type = ARRAY \\(+0:4\\)+ (FLOAT|float)"
+    gdb_test_exact "print realtable1"	\
+	{= [(0): -2, (1): -1, (2): 0, (3): 1, (4): 2]}
+
+    gdb_test "ptype realtable2"		"type = ARRAY \\(+5:9\\)+ (FLOAT|float)"
+    gdb_test_exact "print realtable2"	\
+	{= [(5): -2, (6): -1, (7): 0, (8): 1, (9): 2]}
+
+    gdb_test "ptype longrealtable1"	"type = ARRAY \\(+0:4\\)+ (DOUBLE|double)"
+    gdb_test_exact "print longrealtable1" \
+	{= [(0): -2, (1): -1, (2): 0, (3): 1, (4): 2]}
+
+    gdb_test "ptype longrealtable2"	"type = ARRAY \\(+5:9\\)+ (DOUBLE|double)"
+    gdb_test_exact "print longrealtable2"	\
+	{= [(5): -2, (6): -1, (7): 0, (8): 1, (9): 2]}
+
+    gdb_test "print length(longrealtable2)" {= 5}
+    gdb_test "print lower(longrealtable2)" {= 5}
+    gdb_test "print upper(longrealtable2)" {= 9}
+}
+
+proc test_strings {} {
+
+    gdb_test "ptype string1"		"type = CHARS \[(\]4\[)\]+"
+    gdb_test "print string1"		" = \"abcd\""
+
+    gdb_test "ptype string2"		"type = CHARS \[(\]+5\[)\]+"
+    gdb_test "print string2"		{ = \"ef\^\(0\)gh\"}
+
+    gdb_test "ptype string3"		"type = CHARS \[(\]+6\[)\]+"
+    gdb_test "print string3"		" = \"efghij\""
+
+    gdb_test "ptype string4"		"type = CHARS \[(\]+7\[)\]+"
+    gdb_test "print string4"		{ = \"zzzzzz\^\(0\)\"}
+
+    # These tests require a running process, so run to one of the procs
+    # and then do the tests.
+
+    if [runto scalar_arithmetic] then {
+	gdb_test "ptype string1//string2"	"type = CHARS \\(9\\)"
+	gdb_test "print string1//string2"    { = \"abcdef\^\(0\)gh\"}
+	gdb_test_exact {ptype "a chill string"} {type = CHARS (14)}
+	gdb_test "print 'a chill string'"	" = \"a chill string\""
+	gdb_test "print \"ef\"//c'00'//\"gh\""	{ = \"ef\^\(0\)gh\"}
+	gdb_test "print string1 // \"efgh\""	" = \"abcdefgh\""
+	gdb_test "print (6) 'z'"		" = \"zzzzzz\""
+	gdb_test "ptype (6) 'z'"		"type = CHARS \[(\]+6\[)\]+"
+	gdb_test "print (1+2*3) 'x'"		" = \"xxxxxxx\""
+	gdb_test "ptype (1+2*3) 'x'"		"type = CHARS \[(\]+7\[)\]+"
+    }
+
+}
+
+proc test_structs {} {
+    gdb_test "ptype struct1" \
+	"type = STRUCT \\(+.*abool (BOOL|bool),.*aint (INT|int),.*astring CHARS \\(+8\\)+.*\\)+"
+    gdb_test "print struct1" \
+	".* = \\\[\.abool: TRUE, \.aint: 123, \.astring: \"a string\"\\\]"
+    gdb_test "ptype struct2" \
+	"type = STRUCT \\(+.*abool (BOOL|bool),.*nstruct simple_struct,.*aint (INT|int).*\\)+"
+    gdb_test "print struct2" \
+	".* = \\\[.abool: TRUE, \.nstruct: \\\[\.abool: FALSE, \.aint: 456, \.astring: \"deadbeef\"\\\], \.aint: 789\\\]"
+}
+
+proc test_ptr {} {
+    # This is to test Cygnus PR 6932
+    gdb_test "print xptr->int" ".* = 32767"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/configure b/gdb/testsuite/gdb.chill/configure
new file mode 100755
index 0000000..24e429d
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=chexp.exp
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.chill/configure.in b/gdb/testsuite/gdb.chill/configure.in
new file mode 100644
index 0000000..3eed026
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/configure.in
@@ -0,0 +1,11 @@
+dnl Process this file file with autoconf to produce a configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(chexp.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.chill/enum.ch b/gdb/testsuite/gdb.chill/enum.ch
new file mode 100644
index 0000000..971fc94
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/enum.ch
@@ -0,0 +1,9 @@
+hugo: module
+
+  synmode m_set = set (a, b, c, d, e, f, g, h, i);
+  dcl x long;
+  dcl y m_set;
+
+  writetext (stdout, "done.%/");
+
+end hugo;
diff --git a/gdb/testsuite/gdb.chill/enum.exp b/gdb/testsuite/gdb.chill/enum.exp
new file mode 100644
index 0000000..74fee35
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/enum.exp
@@ -0,0 +1,85 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at
+#
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "enum"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+	"set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto hugo_
+
+    send_gdb "set var \$i := d\n"
+    gdb_expect -re ".*$gdb_prompt $"
+    gdb_test "print \$i" { = d}
+    gdb_test "print size (\$i)" { = 1}
+    gdb_test "print b+c" { = 3}
+    gdb_test "print c*d" { = 6}
+    gdb_test "print a<b" { = TRUE}
+    gdb_test "print a=b" { = FALSE}
+    gdb_test "print a=a" { = TRUE}
+    gdb_test "print a/=\$i" { = TRUE}
+
+# This is PR 8870
+    gdb_test "break malloc" ".*"
+    gdb_test {set var $j := m_set[b]} ".*invalid.*tuple.*"
+}
diff --git a/gdb/testsuite/gdb.chill/extstruct-grt.ch b/gdb/testsuite/gdb.chill/extstruct-grt.ch
new file mode 100644
index 0000000..abd0d5e
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/extstruct-grt.ch
@@ -0,0 +1,12 @@
+pot1: MODULE
+
+SYNMODE m_array1 = ARRAY (2:3) ulong;
+SYNMODE m_struct = STRUCT (f1 int,
+			   f2 REF m_array1,
+			   f3 m_array1);
+SYNMODE m_array3 = ARRAY (5:6) m_struct;
+SYNMODE m_array4 = ARRAY (7:8) ARRAY (9:10) m_struct;
+
+GRANT all;
+
+END pot1;
diff --git a/gdb/testsuite/gdb.chill/extstruct.ch b/gdb/testsuite/gdb.chill/extstruct.ch
new file mode 100644
index 0000000..649f609
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/extstruct.ch
@@ -0,0 +1,16 @@
+pottendo: MODULE
+
+<> USE_SEIZE_FILE "extstruct-grt.grt" <>
+SEIZE m_array3;
+SEIZE m_array4;
+
+SYNMODE m_x = STRUCT (i long,
+		      ar m_array3);
+SYNMODE m_y = STRUCT (i long,
+		      ar m_array4);
+
+DCL x LONG;
+
+x := 10;
+
+END pottendo;
diff --git a/gdb/testsuite/gdb.chill/extstruct.exp b/gdb/testsuite/gdb.chill/extstruct.exp
new file mode 100644
index 0000000..39d61cb
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/extstruct.exp
@@ -0,0 +1,66 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "extstruct-grt"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "extstruct"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    gdb_test "set var \$i := m_x\[\]" ""
+    gdb_test "print \$i" { = \[.i: 0, .ar: \[\(5:6\): \[.f1: 0, .f2: NULL, .f3: \[\(2:3\): 0\]\]\]\]}
+
+    gdb_test "set var \$j := m_y\[\]" ""
+    gdb_test "print \$j" { = \[.i: 0, .ar: \[\(7:8\): \[\(9:10\): \[.f1: 0, .f2: NULL, .f3: \[\(2:3\): 0\]\]\]\]\]}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/func1.ch b/gdb/testsuite/gdb.chill/func1.ch
new file mode 100644
index 0000000..d0d28ce
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/func1.ch
@@ -0,0 +1,9 @@
+func1: MODULE
+
+SYNMODE m_set = SET (e1, e2, e3, e4, e5, e6, e7, e8, e9, e10);
+SYNMODE m_setrange = RANGE (e3:e8);
+SYNMODE m_ps = POWERSET m_set;
+SYNMODE m_rangeps = POWERSET RANGE(0:31);
+GRANT ALL;
+
+END func1;
diff --git a/gdb/testsuite/gdb.chill/gch1041.ch b/gdb/testsuite/gdb.chill/gch1041.ch
new file mode 100644
index 0000000..a9ce80b
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1041.ch
@@ -0,0 +1,17 @@
+arr: MODULE
+
+SYNMODE m_chars = CHARS(30) VARYING;
+SYNMODE m_s = STRUCT (l LONG, c m_chars, b BOOL);
+
+DCL a1 ARRAY (1:1000) LONG INIT := [(5:100): 33, (1:4): 44, (ELSE): 55 ];
+DCL a2 ARRAY (1:10) m_s INIT := [(*): [ 22, "mowi", TRUE ] ];
+DCL a3 ARRAY (CHAR) CHAR INIT := [(*): 'X'];
+
+SYNMODE m_set = SET (e1, e2, e3, e4, e5, e6, e7, e9, e10);
+DCL a4 ARRAY (m_set) BOOL INIT := [(*): TRUE];
+
+a1 := [(5:100): 33, (1:4): 44, (ELSE): 55 ];
+a1 := [ (*): 22 ];
+a2 := [(*): [ 22, "mowi", TRUE ] ];
+
+END arr;
diff --git a/gdb/testsuite/gdb.chill/gch1041.exp b/gdb/testsuite/gdb.chill/gch1041.exp
new file mode 100644
index 0000000..1cec0f9
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1041.exp
@@ -0,0 +1,76 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+#                          Martin Pottendorfer (pottendo@aut.alcatel.at)
+#
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch1041"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+	"set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto arr_
+    # check if array slices print correct index
+    gdb_test {print a1(10:30)} { = \[\(10:30\): 33\]}
+    gdb_test {print a2(3:5)} { = \[\(3:5\): \[.l: 22, .c: "mowi", .b: TRUE\]\]}
+    gdb_test {print a3('a':'c')} { = \[\('a':'c'\): 'X'\]}
+    gdb_test {print a4(e2:e5)} { = \[\(e2:e5\): TRUE\]}
+}
diff --git a/gdb/testsuite/gdb.chill/gch1272.ch b/gdb/testsuite/gdb.chill/gch1272.ch
new file mode 100644
index 0000000..6112d4b
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1272.ch
@@ -0,0 +1,21 @@
+gch1272: MODULE
+
+SYNMODE m_array = ARRAY (0:99) INT;
+DCL foo m_array;
+
+SYNMODE m_xxx = ARRAY (1:10) LONG;
+
+SYNMODE m_struct = STRUCT (i LONG, b BOOL);
+SYNMODE m_bar = ARRAY (-10:20) m_struct;
+DCL bar m_bar;
+
+SYNMODE m_ps = POWERSET LONG (0:20);
+
+brrr: PROC ()
+END;
+
+foo := [ (*): 222 ];
+
+brrr ();
+
+END gch1272;
diff --git a/gdb/testsuite/gdb.chill/gch1272.exp b/gdb/testsuite/gdb.chill/gch1272.exp
new file mode 100644
index 0000000..db60715
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1272.exp
@@ -0,0 +1,86 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at)
+#
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch1272"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+        -re ".*$gdb_prompt $" {}
+        timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+        "set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto brrr
+
+    # check foo
+    gdb_test {print foo} { = \[\(0:99\): 222\]}
+    gdb_test "set var foo := m_array\[\(\*\):44\]" ".*"
+    gdb_test {print foo} { = \[\(0:99\): 44\]}
+
+    # check bar
+    gdb_test {print bar} { = \[\(-10:20\): \[.i: 0, .b: FALSE\]\]}
+    gdb_test "set var bar := m_bar\[\(\*\): \[42, TRUE\]\]" ".*"
+    gdb_test {print bar} { = \[\(-10:20\): \[.i: 42, .b: TRUE\]\]}
+
+    # some failues
+    gdb_test "set var foo := \[\(\*\):44\]" {\(\*\) only possible with modename in front of tuple \(mode\[\.\.\]\)}
+    gdb_test "set var foo := m_xxx\[\(\*\):44\]" {Invalid cast\.}
+    gdb_test "set var foo := m_struct\[\(\*\):44\]" {\(\*\) in invalid context}
+    gdb_test "set var foo := m_ps\[\(\*\):44\]" {\(\*\) in invalid context}
+}
diff --git a/gdb/testsuite/gdb.chill/gch1280.ch b/gdb/testsuite/gdb.chill/gch1280.ch
new file mode 100644
index 0000000..3fba71f
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1280.ch
@@ -0,0 +1,13 @@
+gch1280: MODULE
+
+SYNMODE m_x = ARRAY (1:3) LONG;
+DCL v_x m_x;
+DCL v_xx m_x;
+
+doit: PROC ()
+END doit;
+
+v_x := [ 11, 12, 13 ];
+doit ();
+
+END gch1280;
diff --git a/gdb/testsuite/gdb.chill/gch1280.exp b/gdb/testsuite/gdb.chill/gch1280.exp
new file mode 100644
index 0000000..216625d
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch1280.exp
@@ -0,0 +1,76 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at)
+#
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch1280"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+        -re ".*$gdb_prompt $" {}
+        timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+        "set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto doit
+    gdb_test "next" ""
+    # check too many array elements
+    gdb_test {set var v_x := [1,2,3,4,5]} {Too many array elements}
+    gdb_test {set var $i := m_x[(3): 22, 25]} {Too many array elements}
+    gdb_test "set var \$i := m_x\[\(2\): 22, 25\]" ""
+    gdb_test {print $i} { = \[\(1\): 0, \(2\): 22, \(3\): 25\]}
+}
diff --git a/gdb/testsuite/gdb.chill/gch922.ch b/gdb/testsuite/gdb.chill/gch922.ch
new file mode 100644
index 0000000..b3e8a23
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch922.ch
@@ -0,0 +1,23 @@
+xx : module
+  
+dcl a chars(200) varying init := (70)'^(0)' // "Jason""^(0,5)""Hugo^(10)" // (70)'^(1)';
+dcl b chars(20) varying init := "Jason""^(0,5)""Hugo^(10)";
+dcl c chars(256) varying init := (70)'a' // "^(0,5)Jason" // (70)'b';
+dcl d char init := '^(11)';
+
+bulk: PROC ();
+END bulk;
+
+a := (50) '^(255,0,222,127)';
+b := (1)'^(200)';
+d := 'a';
+
+c:= (256)" ";
+
+DO FOR i:= 0 BY 1 TO 255;
+   c (255-i) := char (i);
+OD;
+  
+bulk ();
+
+end xx;
\ No newline at end of file
diff --git a/gdb/testsuite/gdb.chill/gch922.exp b/gdb/testsuite/gdb.chill/gch922.exp
new file mode 100644
index 0000000..c0fb6dc
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch922.exp
@@ -0,0 +1,183 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at)
+#			   Kurt Fuchs (fuchs_k@aut.alcatel.at)
+#
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch922"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break xx_\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n" 
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+#	First one is string to send_gdb to gdb
+#	Second one is string to match gdb result to
+#	Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+    global gdb_prompt
+    global passcount
+    global verbose
+
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set sendthis [lindex $args 0]
+    set expectthis [lindex $args 1]
+    set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+    if $result==0 {incr passcount}
+    return $result
+}
+
+
+proc test_chars {} {
+    global passcount gdb_prompt
+
+    verbose "Testing Chars"
+    set passcount 0
+
+    test_print_accept "print a" {'\^\(0\)'<repeats 70 times>//"Jason""\^\(0,5\)""Hugo\^\(10\)"//'\^\(1\)'<repeats 70 times>}
+    test_print_accept "print b" {"Jason""\^\(0,5\)""Hugo\^\(10\)"}
+    test_print_accept "print c" {'a'<repeats 70 times>//"\^\(0,5\)Jason"//'b'<repeats 70 times>}
+    test_print_accept "print d" {'\^\(11\)'}
+
+    gdb_test "set var a := (100)'\^(0,255)'" ""
+    test_print_accept "print a" {"\^\(0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255,0,255\)"}
+
+    send_gdb "set var a := (10)'\^(1)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {"\^\(1,1,1,1,1,1,1,1,1,1\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"}
+    send_gdb "set var b := \"Hugo \"\"\^(3,4)\"\"Otto\^(17)\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print b" {"Hugo ""\^\(3,4\)""Otto\^\(17\)"}
+    send_gdb "set var c := (70)'b' // \"\^(2,3)Hugo \" // (70)'c' \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print c" {'b'<repeats 70 times>//"\^\(2,3\)Hugo "//'c'<repeats 70 times>}
+    gdb_test "set var d := '\^(199)'" ""
+    test_print_accept "print d" {'\^\(199\)'}
+
+    test_print_accept "print (10)'\^(0)'//(26)\"\^(66,67)\"//\" \"//'I'//' '//'a'//'m'//\" Hugo\"" {"\^\(0,0,0,0,0,0,0,0,0,0\)BCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC I am Hugo"}
+    test_print_accept "print \"Jason\"\"\^(0,5)\"\"Hugo\^(10)\"" {"Jason""\^\(0,5\)""Hugo\^\(10\)"}
+
+    send_gdb "set var a := \"\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {""}
+    send_gdb "set var a := \"\"\"\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {""""}
+    send_gdb "set var a := \" \"\"\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {" """}
+    send_gdb "set var a := \"\^\^\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {"\^\^"}
+    send_gdb "set var a := \"'\" \n" ; gdb_expect -re "$gdb_prompt $"
+    test_print_accept "print a" {"'"}
+}
+
+
+proc test_code {} {
+    global passcount gdb_prompt
+
+    verbose "Testing Chars"
+    set passcount 0
+
+    runto bulk
+    test_print_accept "print a" {"\^\(255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127,255,0,222,127\)"}
+    test_print_accept "print b" {"\^\(200\)"}
+#    test_print_accept "print c" {'a'<repeats 70 times>//"\^\(0,5\)Jason"//'b'<repeats 70 times>}
+    test_print_accept "print d" {'a'}
+}
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+
+if [set_lang_chill] then {
+    # test builtins as described in chapter 6.20.3 Z.200
+
+    test_chars
+#    test_code
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/gch981.ch b/gdb/testsuite/gdb.chill/gch981.ch
new file mode 100644
index 0000000..e8f0474
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch981.ch
@@ -0,0 +1,60 @@
+xx: MODULE
+
+SYNMODE m_set1 = SET (e1, e2, e3, e4, e5);
+DCL v_set1 m_set1 INIT := e3;
+
+SYNMODE m_set2 = SET (a1=1, a2=2, a3=17, a4=9, a5=8, a6=0, a7=14, a8=33, a9=12);
+DCL v1_set2 m_set2 INIT := a1;
+DCL v2_set2 m_set2 INIT := a2;
+DCL v3_set2 m_set2 INIT := a3;
+DCL v4_set2 m_set2 INIT := a4;
+DCL v5_set2 m_set2 INIT := a5;
+DCL v6_set2 m_set2 INIT := a6;
+DCL v7_set2 m_set2 INIT := a7;
+DCL v8_set2 m_set2 INIT := a8;
+DCL v9_set2 m_set2 INIT := a9;
+
+SYNMODE m_set3 = SET (b1, b2, b3, b4, b5 = 4711, b6, b7 = 4713);
+DCL v_set3 m_set3 INIT := b7;
+
+SYNMODE m_set4 = SET(s1=111111, s2, s3, s4); 
+DCL v1_set4 m_set4 INIT := s1;
+
+SYNMODE m_set_range = m_set1(e2:e5);
+DCL v_set_range m_set_range INIT := e3;
+
+SYNMODE m_set_range_arr = ARRAY (m_set_range) BYTE;
+DCL v_set_range_arr ARRAY (m_set_range) BYTE;
+
+SYNMODE m_set_arr = ARRAY (m_set1) BYTE;
+DCL v_set_arr ARRAY (m_set1) BYTE;
+
+NEWMODE m_power1 = POWERSET m_set1;
+DCL v1_power1 READ m_power1 INIT := [e1,e2,e3,e4,e5];
+DCL v2_power1 m_power1 INIT := [];
+
+NEWMODE m_power2 = POWERSET m_set2;
+DCL v_power2 m_power2 INIT := [];
+
+NEWMODE m_power3 = POWERSET m_set3;
+DCL v_power3 m_power3 INIT := [b1:b2];
+
+NEWMODE m_power4 = POWERSET CHAR;
+DCL v_power4 m_power4 INIT := ['b':'x'];
+
+NEWMODE m_power5 = POWERSET INT (2:400);
+DCL v_power5 m_power5 INIT := [2:100];
+
+NEWMODE m_power6 = POWERSET INT;
+DCL v_power6 m_power6;
+
+NEWMODE m_power7 = POWERSET LONG;
+DCL v_power7 m_power7;
+
+
+v_set1:= e2;
+v2_power1:= [e1];
+
+v_set1:= e1;
+
+END xx;
diff --git a/gdb/testsuite/gdb.chill/gch981.exp b/gdb/testsuite/gdb.chill/gch981.exp
new file mode 100644
index 0000000..3a948b1
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/gch981.exp
@@ -0,0 +1,249 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+# This file was written by Wilfried Moser (moser@aut.alcatel.at)
+#			   Kurt Fuchs (fuchs_k@aut.alcatel.at)
+#
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "gch981"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break xx_\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n" 
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+#	First one is string to send_gdb to gdb
+#	Second one is string to match gdb result to
+#	Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+    global gdb_prompt
+    global passcount
+    global verbose
+
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set sendthis [lindex $args 0]
+    set expectthis [lindex $args 1]
+    set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+    if $result==0 {incr passcount}
+    return $result
+}
+
+proc test_power {} {
+    global passcount gdb_prompt
+
+    verbose "Testing some POWERSET Stuff"
+    set passcount 0
+
+    test_print_accept "print v1_power1" {\[e1:e5\]}
+    test_print_accept "print v2_power1" {\[\]}
+    test_print_accept "print SIZE(v1_power1)" "1"
+
+    gdb_test "set v1_power1 := \[b1\]"  ""
+#   if GDB has rejected the improper values, we have to gdb_expect the same!
+    test_print_accept "print v1_power1" {\[e1:e5\]}
+
+    gdb_test "set v1_power1 := \[a1,a2\]"  ""
+    test_print_accept "print v1_power1" {\[e1:e5\]}
+    gdb_test "set v1_power1 := \[b1,b2,b3,e4\]"  ""
+    test_print_accept "print v1_power1" {\[e1:e5\]}
+    gdb_test "set v1_power1 := \[e4:e5\]"  ""
+    test_print_accept "print v1_power1" {\[e4:e5\]}
+    gdb_test "set v1_power1 := \[e1, e2:e3, e5\]"  ""
+    test_print_accept "print v1_power1" {\[e1:e3, e5\]}
+    gdb_test "set v1_power1 := \[e1, e2:e4, e4:e5\]"  ""
+    test_print_accept "print v1_power1" {\[e1:e5\]}
+    gdb_test "set v1_power1 := \[e1, e1:e3, e1:e2, e2:e3\]"  ""
+    test_print_accept "print v1_power1" {\[e1:e3\]}
+
+    gdb_test "set v_power2 := \[e2\]"  ""
+    test_print_accept "print v_power2" {\[\]}
+    gdb_test "set v_power2 := \[1,2,3\]"  ""
+    test_print_accept "print v_power2" {\[\]}
+    gdb_test "set v_power2 := \[e2, b2, b1\]"  ""
+    test_print_accept "print v_power2" {\[\]}
+
+# Note, that this is a numbered SET, so a1:a3 contains all elements (exept a6)
+    gdb_test "set v_power2 := \[a1:a3, a6:a4, a7:a9\]"  ""
+    test_print_accept "print v_power2" {\[a6:a3\]}
+    gdb_test "set v_power2 := \[a1, a4:a6, a9\]"  ""
+    test_print_accept "print v_power2" {\[a1, a9\]}
+    gdb_test "set v_power2 := \[a1:a2, a6, a9\]"  ""
+    test_print_accept "print v_power2" {\[a6:a2, a9\]}
+    gdb_test "set v_power2 := \[a1, a4, a7:a8, a9:a3\]"  ""
+    test_print_accept "print v_power2" {\[a1, a4, a9:a8\]}
+    gdb_test "set v_power2 := \[a1, a4:a8\]"  ""
+    test_print_accept "print v_power2" {\[a1, a4:a8\]}
+    gdb_test "set v_power2 := \[a8,a3,a7,a9,a5,a6\]"  ""
+    test_print_accept "print v_power2" {\[a6, a5, a9, a7, a3, a8\]}
+
+    gdb_test "set v_power3 := \[b1:b2,e1\]"  ""
+    test_print_accept "print v_power3" {\[b1:b2\]}
+    gdb_test "set v_power3 := \[b1, b3, b6:b7\]"  ""
+    test_print_accept "print v_power3" {\[b1, b3, b6:b7\]}
+    gdb_test "set v_power3 := \[b1, b3:b4, b7\]"  ""
+    test_print_accept "print v_power3" {\[b1, b3:b4, b7\]}
+    gdb_test "set v_power3 := \[b1, b4:b6, b7\]"  ""
+    test_print_accept "print v_power3" {\[b1, b4:b7\]}
+    gdb_test "set v_power3 := \[b1:b7\]"  ""
+    test_print_accept "print v_power3" {\[b1:b7\]}
+    gdb_test "set v_power3 := \[b5:b7, b1\]"  ""
+    test_print_accept "print v_power3" {\[b1, b5:b7\]}
+
+    gdb_test "set v_power4 := \[\"b\"\]" ""
+    test_print_accept "print v_power4" {\['b':'x'\]}
+    gdb_test "set v_power4 := \[5\]"  ""
+    test_print_accept "print v_power4" {\['b':'x'\]}
+    gdb_test "set v_power4 := \['c':'f','g':'h','o':'t'\]" ""
+    test_print_accept "print v_power4" {\['c':'h', 'o':'t'\]}
+    gdb_test "set v_power4 := \['a','b','c','d','e','f'\]" ""
+    test_print_accept "print v_power4" {\['a':'f'\]}
+    gdb_test "set v_power4 := \['\^(0)':'\^(200)'\]" ""
+    test_print_accept "print v_power4" {\['\^\(0\)':'\^\(200\)'\]}
+
+    gdb_test "set v_power5 := \[a8\]"  ""
+    test_print_accept "print v_power5" {\[2:100\]}
+    gdb_test "set v_power5 := \[4\]"  ""
+    test_print_accept "print v_power5" {\[4\]}
+    gdb_test "set v_power5 := \[3:95,9:100,10:107,200:250\]" ""
+    test_print_accept "print v_power5" {\[3:107, 200:250\]}
+    gdb_test "set v_power5 := \[2, 100:120, 350:400\]"  ""
+    test_print_accept "print v_power5" {\[2, 100:120, 350:400\]}
+    gdb_test "set v_power5 := \[2:64,65:127,128:256,256:399,400\]" ""
+    test_print_accept "print v_power5" {\[2:400\]}
+    gdb_test "set v_power5 := \[3:95, 99:100, 101:107, 200:250\]"  ""
+    test_print_accept "print v_power5" {\[3:95, 99:107, 200:250\]}
+
+    gdb_test "set v_power6 := \[a8\]"  ""
+    test_print_accept "print v_power6" {\[\]}
+    gdb_test "set v_power6 := \[4\]"  ""
+    test_print_accept "print v_power6" {\[4\]}
+    gdb_test "set v_power6 := \[3:95, 99:100, 101:107, 200:250\]"  ""
+    test_print_accept "print v_power6" {\[3:95, 99:107, 200:250\]}
+    gdb_test "set v_power6 := \[-111:0, 1:112, 11111:22222\]"  ""
+    test_print_accept "print v_power6" {\[-111:112, 11111:22222\]}
+    gdb_test "set v_power6 := \[0, 200:4000, 6666:9999\]"  ""
+    test_print_accept "print v_power6" {\[0, 200:4000, 6666:9999\]}
+
+#    gdb_test "set v_power7 := \[a8\]"  ""
+#    test_print_accept "print v_power7" {\[2:100\]}
+#    gdb_test "set v_power7 := \[4\]"  ""
+#    test_print_accept "print v_power7" {\[4\]}
+#    gdb_test "set v_power7 := \[3:95, 99:100, 101:107, 200:250\]" ""
+#    test_print_accept "print v_power7" {\[3:95, 99:107, 200:250\]}
+#    gdb_test "set v_power7 := \[0, 1000, 1000000, 10000000000\]"  ""
+#    test_print_accept "print v_power7" {\[0, 1000, 1000000, 1000000000\]}
+#    gdb_test "set v_power7 := \[-20000:100000, 111111:2222222\]"  ""
+#    test_print_accept "print v_power7" {\[-20000:100000, 111111:2222222\]}
+#    gdb_test "set v_power7 := \[\]"  ""
+#    test_print_accept "print v_power7" {\[3:95, 99:107, 200:250\]}
+#    gdb_test "set v_power7 := \[2:-500, -501:1, 20:370, -888:-920, 1000:2000, 1800:2500\]\ " ""
+#    test_print_accept "print v_power7" {\[-920:-888, -501:2, 20:370, 1000:2500\]}
+#    test_print_accept "print SIZE(v_power7)" ""
+
+
+    runto 58
+    test_print_accept "print v_set1 IN v1_power1" "TRUE"
+    test_print_accept "print v_set1 IN v2_power1" "FALSE"
+
+}
+
+
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+
+if [set_lang_chill] then {
+    # test builtins as described in chapter 6.20.3 Z.200
+
+    test_power 
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/misc.ch b/gdb/testsuite/gdb.chill/misc.ch
new file mode 100644
index 0000000..20f12c8
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/misc.ch
@@ -0,0 +1,12 @@
+misc_tests : MODULE;
+
+DCL otto INT := 42;
+
+DCL foo STRUCT (l LONG, c CHAR, b BOOL, s CHARS(3));
+
+dummyfunc: PROC();
+END dummyfunc;
+
+dummyfunc();
+
+END misc_tests;
diff --git a/gdb/testsuite/gdb.chill/misc.exp b/gdb/testsuite/gdb.chill/misc.exp
new file mode 100644
index 0000000..684c34d
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/misc.exp
@@ -0,0 +1,100 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+#                          Martin Pottendorfer (pottendo@aut.alcatel.at)
+#
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "misc"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+	"set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto dummyfunc
+    # check upper/lower case 
+    gdb_test "ptype BOOL" " = (bool|BOOL)"
+    gdb_test "ptype bool" " = (bool|BOOL)"
+    gdb_test "print otto" " = 42"
+    gdb_test "print OTTO" " = 42"
+    gdb_test "print otTO" " = 42"
+    gdb_test "print OTto" " = 42"
+    gdb_test "print NULL" " = NULL" "print emptiness literal"
+
+    # This tests PR 8496.
+    gdb_test {printf "%d %d.",  3+4,2} "7 2." "printf with 2 arguments"
+
+    # This tests GCH/924
+    gdb_test {print (h'23)} { = 35} "print parantised integer literal"
+
+    # Linux thinks this is at line 6, but is otherwise ok.
+    setup_xfail "i*86-pc-linux*-gnu"
+    gdb_test "info line" \
+	{Line 7 of .*misc.ch.* at address H'[0-9a-fA-F]+.*}\
+	"info about current line"
+
+    # check array () type (expr)
+    setup_xfail "m68*-*-hpux*"
+    gdb_test "print array () ubyte (foo)" { = \[\(0:11\): 0\]}
+	
+    send_gdb "set var \$i := foo\n"
+    gdb_expect -re ".*$gdb_prompt $"
+    setup_xfail "m68*-*-hpux*"
+    gdb_test "print/x array () byte (\$i)" { = \[\(0:11\): H'0\]}
+}
diff --git a/gdb/testsuite/gdb.chill/powerset.ch b/gdb/testsuite/gdb.chill/powerset.ch
new file mode 100644
index 0000000..dd3172d
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/powerset.ch
@@ -0,0 +1,33 @@
+--
+-- check powerset operators and built-ins
+--
+
+ps: MODULE
+
+SYNMODE m_ps1 = POWERSET ULONG (0:8);
+DCL v_ps1 m_ps1 INIT := [1,3,5,7];
+
+SYNMODE m_ps2 = POWERSET LONG (-100:100);
+DCL v_ps2 m_ps2 INIT := [ -100:-95, -1:1, 95:100];
+
+SYNMODE m_set = SET (aa, bb, cc, dd, ee, ff, gg, hh, ii, jj);
+SYNMODE m_ps3 = POWERSET m_set;
+DCL v_ps3 m_ps3 INIT := [bb, dd, ff, ii];
+
+SYNMODE m_ps4 = POWERSET CHAR(' ':'z');
+DCL v_ps4 m_ps4 INIT := [ '.', ',', 'A':'F', 'x':'z' ];
+
+SYNMODE m_ps5 = POWERSET BOOL;
+DCL v_ps5 m_ps5 INIT := [ FALSE ];
+DCL v_ps51 m_ps5 INIT := [ ];
+
+SYNMODE m_int_range = INT(-100:100);
+SYNMODE m_int_subrange = m_int_range(-50:50);
+SYNMODE m_ps6 = POWERSET m_int_subrange;
+DCL v_ps6 m_ps6 INIT := [ LOWER(m_int_subrange):UPPER(m_int_subrange) ];
+
+DCL x INT;
+
+x := 25;
+
+END ps;
diff --git a/gdb/testsuite/gdb.chill/powerset.exp b/gdb/testsuite/gdb.chill/powerset.exp
new file mode 100644
index 0000000..f047507
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/powerset.exp
@@ -0,0 +1,187 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "powerset"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break xx_\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n" 
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+#	First one is string to send_gdb to gdb
+#	Second one is string to match gdb result to
+#	Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+    global gdb_prompt
+    global passcount
+    global verbose
+
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set sendthis [lindex $args 0]
+    set expectthis [lindex $args 1]
+    set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+    if $result==0 {incr passcount}
+    return $result
+}
+
+proc test_card {} {
+    global passcount
+
+    verbose "testing builtin CARD"
+    set passcount 0
+
+    # discrete mode names
+    test_print_accept "print card(v_ps1)" "4"
+    test_print_accept "print card(v_ps2)" "15"
+    test_print_accept "print card(v_ps3)" "4"
+    test_print_accept "print card(v_ps4)" "11"
+    test_print_accept "print card(v_ps5)" "1"
+    test_print_accept "print card(v_ps51)" "0"
+    test_print_accept "print card(v_ps6)" "101"
+
+    # a failure
+    setup_xfail "*-*-*"
+    test_print_accept "print card(m_ps1)" "typename in invalid context"
+}
+
+proc test_min {} {
+    global passcount
+
+    verbose "testing builtin MIN"
+    set passcount 0
+
+    # discrete mode names
+    test_print_accept "print min(v_ps1)" "1"
+    test_print_accept "print min(v_ps2)" "-100"
+    test_print_accept "print min(v_ps3)" "bb"
+    test_print_accept "print min(v_ps4)" "','"
+    test_print_accept "print min(v_ps5)" "FALSE"
+    test_print_accept "print min(v_ps6)" "-50"
+
+    # a failure
+    setup_xfail "*-*-*"
+    test_print_accept "print min(v_ps51)" "MIN for empty powerset"
+    setup_xfail "*-*-*"
+    test_print_accept "print min(m_ps1)" "typename in invalid context"
+}
+
+proc test_max {} {
+    global passcount
+
+    verbose "testing builtin MIN"
+    set passcount 0
+
+    # discrete mode names
+    test_print_accept "print max(v_ps1)" "7"
+    test_print_accept "print max(v_ps2)" "100"
+    test_print_accept "print max(v_ps3)" "ii"
+    test_print_accept "print max(v_ps4)" "'z'"
+    test_print_accept "print max(v_ps5)" "FALSE"
+    test_print_accept "print max(v_ps6)" "50"
+
+    # test an IN
+    test_print_accept "print 0 in v_ps6" "TRUE"
+
+    # a failure
+    setup_xfail "*-*-*"
+    test_print_accept "print max(v_ps51)" "MAX for empty powerset"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if [set_lang_chill] then {
+    # test builtins as described in chapter 6.20.3 Z.200
+    test_card
+    test_min
+    test_max
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/pr-4975-grt.ch b/gdb/testsuite/gdb.chill/pr-4975-grt.ch
new file mode 100644
index 0000000..7796362
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-4975-grt.ch
@@ -0,0 +1,13 @@
+gdb_bug_grt: MODULE
+NEWMODE is_channel_type = SET (chan_1,
+     chan_2,
+     chan_3,
+     chan_4,
+     chan_5,
+     chan_6,
+     chan_7,
+     chan_8,
+     chan_9,
+     chan_10);
+GRANT is_channel_type;
+END;
diff --git a/gdb/testsuite/gdb.chill/pr-4975.ch b/gdb/testsuite/gdb.chill/pr-4975.ch
new file mode 100644
index 0000000..dbba064
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-4975.ch
@@ -0,0 +1,43 @@
+/*
+>Number:         4975
+>Category:       chill
+>Synopsis:       Segmentation fault of gdb 4.12.1
+>Description:
+
+    Problem: gdb 4.12.1 segment faults with following chill program.
+*/
+
+gdb_bug: MODULE
+
+<> USE_SEIZE_FILE "pr-4975-grt.grt" <>
+SEIZE is_channel_type;
+
+  SYNMODE chan_type = POWERSET is_channel_type;
+  SYN     hugo chan_type = [chan_1, chan_3];
+
+DCL otto is_channel_type := chan_2;
+
+x: PROC ();
+
+  IF otto IN hugo THEN
+    WRITETEXT (STDOUT, "otto IN hugo%/");
+  ELSE
+    WRITETEXT (STDOUT, "You loose%/");
+  FI;
+END x;
+
+x ();
+
+END gdb_bug;
+/*
+Compiled with:
+
+   chill -S -fgrant-only pr-315-grt.ch
+   chill -g -o pr-315 pr-315.ch
+
+Run gdb with
+
+   gdb pr-315 --readnow
+
+will result in a sigsegv in file gdbtypes.c function force_to_range_type.
+*/
diff --git a/gdb/testsuite/gdb.chill/pr-4975.exp b/gdb/testsuite/gdb.chill/pr-4975.exp
new file mode 100644
index 0000000..f59e7dc
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-4975.exp
@@ -0,0 +1,67 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "pr-4975-grt"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-4975"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    # This is needed (at least on SunOS4) to make sure the
+    # the symbol table is read.
+    runto "x"
+    # "You loose"?  Why, thank you.  (But I suspect "You lose" might have
+    # been what was intended).
+    gdb_test "finish" "You loose.*" "Runs and reads symbols OK"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-5016.ch b/gdb/testsuite/gdb.chill/pr-5016.ch
new file mode 100644
index 0000000..16f49e8
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5016.ch
@@ -0,0 +1,24 @@
+vector: MODULE
+
+SYNMODE m_index = RANGE(1:10);
+NEWMODE vector = ARRAY (m_index) INT;
+
+DCL a, b, c vector;
+
+dump: PROC( a vector LOC, c CHAR );
+  DCL i m_index := 5;
+  DO FOR i IN m_index;
+    WRITETEXT( STDOUT, "%C(%C)=%C ", c, i, a(i) );
+  OD;
+  WRITETEXT( STDOUT, "%/" );
+END dump;
+
+a := vector [ 1, -1, 2, -2, 3, -3, 4, -4, 5, -5 ];
+b := a;
+b(4) := 4;
+b(7) := 7;
+c := vector [(*): 0];
+
+dump(a,'a');
+
+END vector;
diff --git a/gdb/testsuite/gdb.chill/pr-5016.exp b/gdb/testsuite/gdb.chill/pr-5016.exp
new file mode 100644
index 0000000..4384d8c
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5016.exp
@@ -0,0 +1,62 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-5016"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto dump
+    # Linux thinks type is "_cint" (and so does sparc-sun-sunos4, alpha-dec-osf2.0)
+    #setup_xfail "i*86-pc-linux*-gnu" "sparc-sun-sunos4*" "alpha-dec-osf2*"
+    gdb_test "whatis i" "type = m_index" "whatis int-range"
+    gdb_test_exact "ptype m_index" "type = RANGE (1:10)" "ptype m_index"
+    gdb_test_exact "whatis a" "type = /*LOC*/ vector"
+    gdb_test "ptype a" "type = /\\*LOC\\*/ ARRAY \\(1:10\\) (INT|int)"
+    gdb_test "step" ""
+    gdb_test_exact "whatis i" "type = long" "whatis loop counter i"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-5020.ch b/gdb/testsuite/gdb.chill/pr-5020.ch
new file mode 100644
index 0000000..6aba793
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5020.ch
@@ -0,0 +1,19 @@
+
+PR_5020: MODULE
+  dummy_pr_5020: PROC ();
+  END;
+  NEWMODE x = STRUCT (l LONG, b BOOL);
+  NEWMODE aset = SET (aa, bb);
+
+  DCL y ARRAY ('a':'b') x;
+  DCL setarr ARRAY (aset) x;
+  DCL intarr ARRAY(10:11) x;
+  DCL boolarr ARRAY (BOOL) x;
+
+  y('a').l, setarr(aa).l, intarr(10).l, boolarr(FALSE).l := 10;
+  y('a').b, setarr(aa).b, intarr(10).b, boolarr(FALSE).b := TRUE;
+  y('b').l, setarr(bb).l, intarr(11).l, boolarr(TRUE).l := 111;
+  y('b').b, setarr(bb).b, intarr(11).b, boolarr(TRUE).b := FALSE;
+
+  dummy_pr_5020 ();
+END;
diff --git a/gdb/testsuite/gdb.chill/pr-5020.exp b/gdb/testsuite/gdb.chill/pr-5020.exp
new file mode 100644
index 0000000..1adece3
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5020.exp
@@ -0,0 +1,85 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-5020"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    # This is needed (at least on SunOS4) to make sure the
+    # the symbol table is read.
+    gdb_test "break chillvars.ch:3" ""
+    gdb_test "delete 1" ""
+
+    gdb_test "set width 0" ""
+    gdb_test "set print sevenbit-strings" ""
+    gdb_test "set print address off" ""
+
+    test_pr_5020
+}
+
+proc test_pr_5020 {} {
+    global gdb_prompt
+    runto dummy_pr_5020
+    gdb_test_exact "print y" \
+	{= [('a'): [.l: 10, .b: TRUE], ('b'): [.l: 111, .b: FALSE]]}
+    gdb_test_exact "print boolarr" \
+	{= [(FALSE): [.l: 10, .b: TRUE], (TRUE): [.l: 111, .b: FALSE]]}
+    gdb_test_exact "print intarr" \
+	{= [(10): [.l: 10, .b: TRUE], (11): [.l: 111, .b: FALSE]]}
+    gdb_test_exact "print setarr" \
+	{= [(aa): [.l: 10, .b: TRUE], (bb): [.l: 111, .b: FALSE]]}
+    gdb_test "set print pretty" ""
+    gdb_test_exact "print y" \
+{= [('a'): [

+    .l: 10, 

+    .b: TRUE

+  ], ('b'): [

+    .l: 111, 

+    .b: FALSE

+  ]]} "print y pretty"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-5022.ch b/gdb/testsuite/gdb.chill/pr-5022.ch
new file mode 100644
index 0000000..aeaad4e
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5022.ch
@@ -0,0 +1,12 @@
+PR_5022: MODULE
+  dummy_pr_5022: PROC ();
+  END;
+  DCL p PTR;
+  DCL i INT;
+
+  p := NULL;
+  dummy_pr_5022 ();
+  i := 13;
+  p := ->i;
+  dummy_pr_5022 ();
+END;
diff --git a/gdb/testsuite/gdb.chill/pr-5022.exp b/gdb/testsuite/gdb.chill/pr-5022.exp
new file mode 100644
index 0000000..097e386
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5022.exp
@@ -0,0 +1,70 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-5022"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    # This is needed (at least on SunOS4) to make sure the
+    # the symbol table is read.
+    gdb_test "break gdbme.ch:3" ""
+    gdb_test "delete 1" ""
+
+    gdb_test "set width 0" ""
+    gdb_test "set print sevenbit-strings" ""
+
+    test_pr_5022
+}
+
+proc test_pr_5022 {} {
+    global gdb_prompt
+    runto dummy_pr_5022
+    gdb_test "p p" " = NULL" "print NULL pointer"
+    gdb_test "continue" ""
+    gdb_test "p p" {= PTR\(H'[0-9a-fA-F]+\)} "print non-NULL pointer"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-5646-grt.ch b/gdb/testsuite/gdb.chill/pr-5646-grt.ch
new file mode 100644
index 0000000..b7a9002
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5646-grt.ch
@@ -0,0 +1,5 @@
+x: MODULE
+NEWMODE a_set = SET (a, b, c, d);
+NEWMODE a_ps = POWERSET a_set;
+GRANT a_ps;
+END;
diff --git a/gdb/testsuite/gdb.chill/pr-5646.ch b/gdb/testsuite/gdb.chill/pr-5646.ch
new file mode 100644
index 0000000..8c14cb8
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5646.ch
@@ -0,0 +1,15 @@
+y: MODULE
+
+<> USE_SEIZE_FILE "pr-5646-grt.grt" <>
+SEIZE a_ps;
+
+p: PROC ();
+
+  DCL xx a_ps;
+
+  xx := [a, b];
+END p;
+
+p();
+
+END y;
diff --git a/gdb/testsuite/gdb.chill/pr-5646.exp b/gdb/testsuite/gdb.chill/pr-5646.exp
new file mode 100644
index 0000000..958b36a
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5646.exp
@@ -0,0 +1,64 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "pr-5646-grt"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-5646"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto p
+    gdb_test "next" ""
+    gdb_test_exact "print xx" {= [a:b]}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-5984.ch b/gdb/testsuite/gdb.chill/pr-5984.ch
new file mode 100644
index 0000000..3e74a56
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5984.ch
@@ -0,0 +1,8 @@
+x: module                        -- line 1
+  p:proc (t char (20) varying);  --      2
+	  writetext(stdout, t);  --      3
+  end p;                         --      4
+                                 --      5
+  p("Jason Dark.%/");            --      6
+  p("Hello World.%/");           --      7
+end x;        
diff --git a/gdb/testsuite/gdb.chill/pr-5984.exp b/gdb/testsuite/gdb.chill/pr-5984.exp
new file mode 100644
index 0000000..f8ea37e
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-5984.exp
@@ -0,0 +1,57 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-5984"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language chill\n" ; 
+
+    gdb_test "break pr-5984.ch:6" ""
+    send_gdb "run\n"; gdb_expect -re "Breakpoint .*pr-5984.ch:6"
+    gdb_expect -re "$gdb_prompt $"
+    gdb_test "next" "Jason Dark.*" "next over Jason Dark"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-6292.ch b/gdb/testsuite/gdb.chill/pr-6292.ch
new file mode 100644
index 0000000..c2ed953
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-6292.ch
@@ -0,0 +1,17 @@
+hack : module
+
+dcl i int;
+
+fred : proc (a int in, b int loc);
+  writetext(stdout, "a was '%C'; b was '%C'.%/", a, b);
+  b + := 1;
+end fred;
+
+klaus : proc ();
+  writetext(stdout, "here's klaus calling.%/");
+end klaus;
+
+i:=12;
+writetext(stdout, "done.%/");
+
+end hack;
diff --git a/gdb/testsuite/gdb.chill/pr-6292.exp b/gdb/testsuite/gdb.chill/pr-6292.exp
new file mode 100644
index 0000000..db276b8
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-6292.exp
@@ -0,0 +1,58 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-6292"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language chill\n" ; 
+
+    gdb_test "break pr-6292.ch:15" ""
+    send_gdb "run\n"; gdb_expect -re "Breakpoint .*pr-6292.ch:15.*$gdb_prompt $"
+    gdb_test_exact "call klaus()" {here's klaus calling.}
+    gdb_test {set fred(10, i)} {a was '10'; b was '12'.}
+    gdb_test "print i" { = 13} "print i after call"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-6632-grt.ch b/gdb/testsuite/gdb.chill/pr-6632-grt.ch
new file mode 100644
index 0000000..e9434f1
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-6632-grt.ch
@@ -0,0 +1,34 @@
+markus1: MODULE
+
+SYNMODE m_dummy = SET (dummy_1,
+                       dummy_2,
+                       dummy_3,
+                       dummy_4,
+                       dummy_5,
+                       dummy_6,
+                       dummy_7,
+                       dummy_8,
+                       dummy_9,
+                       dummy_10,
+                       dummy_11,
+                       dummy_12,
+                       dummy_13,
+                       dummy_14,
+                       dummy_15,
+                       dummy_16,
+                       dummy_17,
+                       dummy_18,
+                       dummy_19,
+                       dummy_20,
+                       dummy_21,
+                       dummy_22,
+                       dummy_23,
+                       dummy_24,
+                       dummy_25,
+                       dummy_26);
+
+SYNMODE m_dummy_range = m_dummy(dummy_6 : dummy_22);
+
+GRANT m_dummy, m_dummy_range;
+
+END markus1;
diff --git a/gdb/testsuite/gdb.chill/pr-6632.ch b/gdb/testsuite/gdb.chill/pr-6632.ch
new file mode 100644
index 0000000..b82c7ae
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-6632.ch
@@ -0,0 +1,31 @@
+markus: MODULE
+
+<> USE_SEIZE_FILE "pr-6632-grt.grt" <>
+SEIZE m_dummy, m_dummy_range;
+
+DCL v m_dummy_range;
+
+NEWMODE is_str_descr = STRUCT (p PTR,
+                               l INT,
+                               flag STRUCT (x UBYTE,
+                                            y SET (aa, bb, cc, dd, ee, ff)));
+DCL des is_str_descr;
+
+NEWMODE is_cb_debug = STRUCT (i INT,
+                              channel m_dummy_range,
+                              p PTR);
+NEWMODE is_cb_debug_array = ARRAY (0:20) is_cb_debug;
+DCL cb_debug is_cb_debug_array;
+DCL cb_debug_index INT := 0;
+
+p: PROC (pp is_str_descr IN, x m_dummy_range IN)
+  DO WITH cb_debug(cb_debug_index);
+    channel := x;
+  OD;
+END p;
+
+p (des, dummy_10);
+WRITETEXT (stdout, "cb_debug(%C).channel := %C%/", 
+           cb_debug_index, cb_debug(cb_debug_index).channel);
+
+END markus;
diff --git a/gdb/testsuite/gdb.chill/pr-6632.exp b/gdb/testsuite/gdb.chill/pr-6632.exp
new file mode 100644
index 0000000..03e342c
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-6632.exp
@@ -0,0 +1,66 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "pr-6632-grt"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-6632"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} ${objfile2} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto p
+    gdb_test "whatis x" {type = m_dummy_range}
+    gdb_test_exact "ptype x" {type = m_dummy (dummy_6:dummy_22)}
+    gdb_test "print x" { = dummy_10}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-8134.exp b/gdb/testsuite/gdb.chill/pr-8134.exp
new file mode 100644
index 0000000..5bbd66c
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8134.exp
@@ -0,0 +1,65 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+# Note we use pr-8136.ch for pr-8134.exp as well as pr-8136.exp.
+set testfile2 "func1"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-8134"
+set srcfile ${srcdir}/$subdir/pr-8136.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto p1
+    gdb_test "print first" "= 1"
+    gdb_test "print last" "= 10"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-8136.ch b/gdb/testsuite/gdb.chill/pr-8136.ch
new file mode 100644
index 0000000..b380110
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8136.ch
@@ -0,0 +1,34 @@
+-- NOTE: This test is used for pr-3134.exp as well as pr-8136.
+func: MODULE
+
+<> USE_SEIZE_FILE "func1.grt" <>
+SEIZE ALL;
+
+NEWMODE m_struct = STRUCT (i LONG, str CHARS(50) VARYING);
+DCL insarr ARRAY (1:10) INT;
+
+DCL setrange m_setrange := e5;
+
+DCL ps m_ps := [ e3, e7:e9 ];
+DCL range_ps m_rangeps := [ 2, 3, 4, 28 ];
+
+p1: PROC (first INT IN, last INT IN, s m_struct IN);
+
+  DCL foo LONG := 3;
+
+  startall: PROC ()
+    DO FOR i := first to last;
+      insarr(i) := i;
+    OD;
+    DO FOR i := first TO last;
+      WRITETEXT (stdout, "insarr(%C) := %C%/", i, insarr(i));
+    OD;
+  END startall;
+
+  startall ();
+
+END p1;
+
+p1 (LOWER (insarr), UPPER (insarr), [ 10, "This is a string." ]);
+
+END func;
diff --git a/gdb/testsuite/gdb.chill/pr-8136.exp b/gdb/testsuite/gdb.chill/pr-8136.exp
new file mode 100644
index 0000000..7bf360c
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8136.exp
@@ -0,0 +1,63 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "func1"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-8136"
+set srcfile ${srcdir}/$subdir/pr-8136.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto p1
+    gdb_test "print ps" {= \[e3, e7:e9\]}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-8405.ch b/gdb/testsuite/gdb.chill/pr-8405.ch
new file mode 100644
index 0000000..a9b2531
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8405.ch
@@ -0,0 +1,19 @@
+emptybit: MODULE
+
+SYNMODE b8 = BOOLS(8);
+SYN bit8 b8 = B'00000000';
+
+SYNMODE char_m = CHARS(40) VARYING;
+
+SYNMODE stru_m = STRUCT (c char_m, b b8, boo BOOL);
+DCL xx stru_m;
+
+SYNMODE m_stru = STRUCT (c char_m, i LONG, boo BOOL);
+DCL yy m_stru;
+
+SYNMODE m_arr = ARRAY (1:10) LONG;
+DCL zz m_arr;
+
+WRITETEXT (stdout, "%C%/", bit8);
+
+END emptybit;
diff --git a/gdb/testsuite/gdb.chill/pr-8405.exp b/gdb/testsuite/gdb.chill/pr-8405.exp
new file mode 100644
index 0000000..dff230e
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8405.exp
@@ -0,0 +1,61 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+    gdb_test "set var \$i:=xx" ""
+    gdb_test "print \$i" {= \[.c: "", .b: B'00000000', .boo: FALSE\]}
+}
+
+if [skip_chill_tests] then { continue }
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "pr-8405"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+if ![file exists $binfile] then {
+    warning "$binfile does not exist; tests suppressed." 0
+} else {
+    do_tests
+}
diff --git a/gdb/testsuite/gdb.chill/pr-8742.ch b/gdb/testsuite/gdb.chill/pr-8742.ch
new file mode 100644
index 0000000..0541149
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8742.ch
@@ -0,0 +1,32 @@
+hugo : module
+  
+  synmode a = range(1:10);
+  synmode p = powerset a;
+  
+  synmode s = set (sa, sb, sc);
+  synmode s_ps = powerset s;
+  
+  x: proc (ps p);
+    dcl i a;
+    do for i in ps;
+      writetext (stdout, "%C ", i);
+    od;
+    writetext(stdout, "%/");
+  end x;
+  
+  y : proc (ps s_ps);
+    dcl i s;
+    do for i in ps;
+      writetext (stdout, "%C ", i);
+    od;
+    writetext(stdout, "%/");
+  end y;
+
+  dummy: proc ();
+  end dummy;
+      
+  x([1,2,3]);
+  y([sa, sc]);
+  dummy ();
+  
+end hugo;
diff --git a/gdb/testsuite/gdb.chill/pr-8742.exp b/gdb/testsuite/gdb.chill/pr-8742.exp
new file mode 100644
index 0000000..ee49c28
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8742.exp
@@ -0,0 +1,64 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-8742"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto dummy
+
+    # Haven't investigated why these fail on mips-sgi-irix*
+    setup_xfail "m68*-*-hpux*" "mips*-sgi-irix*"
+    gdb_test {call x(p [1, 3, 5])} "1 3 5 " "pass int powerset tuple"
+    setup_xfail "mips*-sgi-irix*"
+    gdb_test {call y(s_ps [sc])} "sc " "pass set powerset tuple"
+    setup_xfail "m68*-*-hpux*" "mips*-sgi-irix*"
+    gdb_test {call x([1, 3, 5])} "1 3 5 " "pass modeless int powerset tuple"
+    setup_xfail "mips*-sgi-irix*"
+    gdb_test {call y([sc])} "sc " "pass modeless set powerset tuple"
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-8894-grt.ch b/gdb/testsuite/gdb.chill/pr-8894-grt.ch
new file mode 100644
index 0000000..5720170
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8894-grt.ch
@@ -0,0 +1,6 @@
+yy: MODULE
+
+SYNMODE m_byte = INT (0:255);
+GRANT ALL;
+
+END yy;
diff --git a/gdb/testsuite/gdb.chill/pr-8894.ch b/gdb/testsuite/gdb.chill/pr-8894.ch
new file mode 100644
index 0000000..391d56b
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8894.ch
@@ -0,0 +1,12 @@
+xx: MODULE
+
+<> USE_SEIZE_FILE "pr-8894-grt.grt" <>
+SEIZE m_byte;
+
+SYNMODE m_struct = STRUCT (a, b, c m_byte);
+
+DCL v m_struct;
+
+v.a := 100;
+
+END xx;
diff --git a/gdb/testsuite/gdb.chill/pr-8894.exp b/gdb/testsuite/gdb.chill/pr-8894.exp
new file mode 100644
index 0000000..adef6f6
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-8894.exp
@@ -0,0 +1,61 @@
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile2 "pr-8894-grt"
+set srcfile2 ${srcdir}/$subdir/${testfile2}.ch
+set objfile2 ${objdir}/$subdir/${testfile2}.o
+if  { [compile "${srcfile2} -g -c -o ${objfile2}"] != "" } {
+    perror "Couldn't compile ${srcfile2}"
+    return -1
+}
+
+set testfile "pr-8894"
+set srcfile ${srcdir}/$subdir/$testfile.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g ${objfile2} -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    gdb_test "print size(m_byte)" { = 2}
+    gdb_test "print size(m_struct)" { = 6}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/pr-9095.ch b/gdb/testsuite/gdb.chill/pr-9095.ch
new file mode 100644
index 0000000..61ffb70
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-9095.ch
@@ -0,0 +1,13 @@
+gdb1: MODULE
+
+SYNMODE m_arr1 = ARRAY (1:10) UBYTE;
+SYNMODE m_struct = STRUCT ( i LONG,
+                            p REF m_arr1);
+SYNMODE m_arr2 = ARRAY (0:10) REF m_struct;
+
+DCL v_arr1 m_arr1 INIT := [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ];
+DCL v_struct m_struct INIT := [ 10, ->v_arr1 ];
+DCL v_arr2 m_arr2 INIT := [ (5): ->v_struct, (ELSE): NULL ];
+
+WRITETEXT (stdout, "v_arr2(5)->.p->(5) = %C%/", v_arr2(5)->.p->(5));
+END gdb1;
diff --git a/gdb/testsuite/gdb.chill/pr-9095.exp b/gdb/testsuite/gdb.chill/pr-9095.exp
new file mode 100644
index 0000000..4c5ce97
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-9095.exp
@@ -0,0 +1,62 @@
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+    runto pr-9095.ch:12
+    gdb_test {p v_arr2(5)->.p(5)} "reference value used as function" \
+	"bad call using pointer"
+}
+
+if [skip_chill_tests] then { continue }
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "pr-9095"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+if ![file exists $binfile] then {
+    warning "$binfile does not exist; tests suppressed." 0
+} else {
+    do_tests
+}
diff --git a/gdb/testsuite/gdb.chill/pr-9946.ch b/gdb/testsuite/gdb.chill/pr-9946.ch
new file mode 100644
index 0000000..3d9210a
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-9946.ch
@@ -0,0 +1,10 @@
+x: module
+
+synmode aset = SET (stopped, moving);
+
+DCL xyz aset;
+
+xyz := moving;
+xyz := SUCC (xyz);
+
+END x;
diff --git a/gdb/testsuite/gdb.chill/pr-9946.exp b/gdb/testsuite/gdb.chill/pr-9946.exp
new file mode 100644
index 0000000..b6b592f
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/pr-9946.exp
@@ -0,0 +1,79 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+#                          Martin Pottendorfer (pottendo@aut.alcatel.at)
+#
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "pr-9946"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+        -re ".*$gdb_prompt $" {}
+        timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    return [gdb_test "show language" ".* source language is \"chill\".*" \
+        "set language to \"chill\""]
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if ![set_lang_chill] then {
+    runto x_
+    gdb_test "next" ""
+    # check comparison of SET's
+    gdb_test {print xyz=moving} { = TRUE}
+    gdb_test {print xyz/=moving} { = FALSE}
+    gdb_test {print xyz<moving} { = FALSE}
+    gdb_test {print xyz<=moving} { = TRUE}
+    gdb_test {print xyz>moving} { = FALSE}
+    gdb_test {print xyz>=moving} { = TRUE}
+}
diff --git a/gdb/testsuite/gdb.chill/result.ch b/gdb/testsuite/gdb.chill/result.ch
new file mode 100644
index 0000000..b8c65e7
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/result.ch
@@ -0,0 +1,29 @@
+test_result:  MODULE
+
+  DCL i INT := 5;
+
+  SYNMODE m_struct = STRUCT (l LONG, b BOOL);
+  DCL v_struct m_struct := [ 20, TRUE ];
+
+  simple_func: PROC () RETURNS (INT);
+    DCL j INT := i;
+    RESULT 10;
+    i + := 2;
+    RESULT j + 2;
+    i + := 2;
+  END simple_func;
+
+  ret_struct: PROC () RETURNS (m_struct)
+    DCL v m_struct := [ 33, FALSE ];
+    RESULT v;
+    v.l := 18;
+  END ret_struct;
+
+  i := simple_func ();
+  i := simple_func ();
+  i * := 10;
+
+  v_struct := ret_struct ();
+
+  i := 33; -- for gdb
+END test_result;
diff --git a/gdb/testsuite/gdb.chill/result.exp b/gdb/testsuite/gdb.chill/result.exp
new file mode 100644
index 0000000..64ca335
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/result.exp
@@ -0,0 +1,77 @@
+# Copyright (C) 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "result"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    gdb_test "set width 0" ""
+    gdb_test "set print sevenbit-strings" ""
+    gdb_test "set print address off" ""
+
+    # simple function
+    runto simple_func
+    gdb_test "step 2" ""
+    gdb_test "print j" "= 5"
+    gdb_test "p RESULT" "= 10"
+    gdb_test "continue" ""
+    gdb_test "print i" "= 7"
+    gdb_test "step 4" ""
+    gdb_test "set RESULT := 50" ""
+    gdb_test "finish" ""
+    gdb_test "step" ""
+    gdb_test "print i" "= 50"
+
+    # returning a structure
+    runto ret_struct
+    gdb_test "step 2" ""
+    gdb_test "p result" {\[.l: 33, .b: FALSE\]}
+    gdb_test "set var result := \[383, TRUE\]" ""
+    gdb_test "finish" ""
+    gdb_test "p v_struct" {\[.l: 383, .b: TRUE\]}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/string.ch b/gdb/testsuite/gdb.chill/string.ch
new file mode 100644
index 0000000..3503c46
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/string.ch
@@ -0,0 +1,24 @@
+ss: MODULE
+
+/* These declarations are from Cygnus PR chill/9078. */
+  SYNMODE m_char20 = CHARS(20) VARYING;
+
+  DCL foo m_char20 INIT := "Moser ";
+  DCL bar m_char20 INIT := "Wilfried";
+
+  DCL foo1 CHARS(5) INIT := "12345";
+  DCL bar1 CHARS(5) INIT := "abcde";
+
+/* This is Cynus PR chill/5696. */
+
+DCL s20 CHARS(20) VARYING;
+
+DCL s10 CHARS(10);
+
+
+s20 := "Moser Wilfried";
+S10 := "1234567890";
+
+WRITETEXT (stdout, "s20 := ""%C"", s10 := ""%C""%/", s20, s10);
+
+END ss;
diff --git a/gdb/testsuite/gdb.chill/string.exp b/gdb/testsuite/gdb.chill/string.exp
new file mode 100644
index 0000000..dabd7e9
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/string.exp
@@ -0,0 +1,73 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "string"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    # These tests based on Cygnus PR chill/5696.
+    runto string.ch:22
+    gdb_test "p s20" { = "Moser Wilfried"} "print simple vstring"
+    gdb_test "p s20(1)" { = 'o'} "print vstring element"
+    gdb_test "p s20(1:3)" { = "ose"} "print vstring slice (:)"
+    gdb_test "p s20(2 up 3)" { = "ser"} "print vstring slice (up)"
+    gdb_test "p s10" { = "1234567890"} "print simple string"
+    gdb_test "p s10(1)" { = '2'} "print string element"
+    gdb_test "p s10(1:3)" { = "234"} "print string slice (:)"
+    gdb_test "p s10(2 up 3)" { = "345"} "print string slice (up)"
+
+    gdb_test "p length(s10)" { = 10} "print string length"
+    gdb_test "p length(s20)" { = 14} "print varying string length"
+    gdb_test "p lower(s10)" { = 0} "print string lower"
+    gdb_test "p upper(s10)" { = 9} "print string upper"
+    gdb_test "p lower(s20)" { = 0} "print varying string lower"
+    gdb_test "p upper(s20)" { = 19} "print varying string upper"
+
+    # These tests are based on Cygnus PR chill/9078.
+    gdb_test "print foo // bar" { = "Moser Wilfried"}
+    gdb_test "print foo // bar1" { = "Moser abcde"}
+    gdb_test "print foo1 // bar1" { = "12345abcde"}
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.chill/tests1.ch b/gdb/testsuite/gdb.chill/tests1.ch
new file mode 100644
index 0000000..b545d07
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tests1.ch
@@ -0,0 +1,240 @@
+-- Copyright (C) 1992, 1995 Free Software Foundation, Inc.
+
+-- This program is free software; you can redistribute it and/or modify
+-- it under the terms of the GNU General Public License as published by
+-- the Free Software Foundation; either version 2 of the License, or
+-- (at your option) any later version.
+-- 
+-- This program is distributed in the hope that it will be useful,
+-- but WITHOUT ANY WARRANTY; without even the implied warranty of
+-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-- GNU General Public License for more details.
+-- 
+-- You should have received a copy of the GNU General Public License
+-- along with this program; if not, write to the Free Software
+-- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+-- Please email any bugs, comments, and/or additions to this file to:
+-- bug-gdb@prep.ai.mit.edu
+
+--
+-- test program 1 (refer to tests1.exp)
+--
+
+/* These functions are defined in libchill.a */
+
+runtime: SPEC MODULE
+DCL chill_argc long;
+DCL chill_argv REF ARRAY (0:1000) REF CHARS (1000) VARYING;
+__print_event: PROC (arg0 ptr,
+       arg1 ptr) END;
+__print_buffer: PROC (arg0 ptr,
+       arg1 ptr) END;
+GRANT ALL;
+END;
+
+tests1: module;
+
+seize 	__print_event,
+	__print_buffer;
+
+newmode	set1 = set(aaa, bbb, ccc);
+newmode	nset1 = set(na = 1, nb = 34, nc = 20);
+newmode r11 = range (0 : upper(ubyte));
+newmode r12 = range (0 : upper(uint));
+--newmode r13 = range (0 : upper(ulong)); -- bug in gnuchill
+newmode r14 = range (lower(byte) : upper(byte));
+newmode r15 = range (lower(int) : upper(int));
+newmode r16 = range (lower(long): upper(long));
+newmode r2 = set1(bbb : ccc);
+newmode r3 = nset1(na : na);
+newmode r4 = nset1(nc : nb);
+newmode r5 = nset1(lower(nset1) : upper(nset1));
+
+newmode pm1 = powerset set(p1, p2, p3, p4, p5, p6, p7, p8, p9, p10);
+newmode pm2 = powerset byte (1:8);
+newmode pm3 = powerset int (-32768:32767);
+newmode pm4 = powerset long (-32768:32768);
+newmode pm5 = powerset long (lower(long):upper(long));
+newmode ref1 = ref pm1;
+newmode ref2 = ref byte;
+newmode ref3 = ptr;
+synmode ref4 = ptr;
+synmode syn_int = int;
+
+newmode prm1 = proc ();
+newmode prm2 = proc (bool in, int out, long inout) returns (char);
+newmode prm3 = proc (pm1, ref1 loc) returns (ref3);
+newmode prm4 = proc () exceptions(ex1, ex2, ex3);
+newmode prm5 = proc (r11, r16 inout, r5 out) returns (r2) exceptions (ex1);
+
+newmode ev1m = event;
+newmode ev2m = event (42);
+
+newmode bu1m = buffer ref1;
+newmode bu2m = buffer (42) ubyte;
+
+newmode strm1 = char (5);
+synmode strm2 = char (7) varying;
+
+synmode bstr1 = bit(20);
+--newmode bstr2 = bit(10) varying;
+
+newmode arr1m = array(1:100) set1;
+newmode arr2m = array(1:100, 1:100) set1;
+newmode arr3m = array(r11, r12, r14) set1;
+newmode arr4m = array(r2) array (r3) array (r4, r5) pm1;
+newmode arr5m = array(1:10) int;
+newmode arr6m = array(1:5, 1:3, 1:2) long;
+
+newmode stru1m = struct (a, b long, 
+			 case b of 
+			   (42): ch1 chars(20),
+			   (52): ch2 chars(10)
+			   else  ch3 chars(1)
+  			 esac);
+
+newmode stru2m = struct (f set1,
+			 case f of
+			    (aaa): ch1 char(20),
+			    (bbb): ch2 char(10) varying
+			 else	ch3 char(0) varying
+			 esac);
+newmode stru3m = struct (f r3,
+			 case f of
+			    (na): ch1 char(20)
+			 esac);
+newmode stru4m = struct (i long,
+			 case of
+			   : i1, i11 int,
+			     b1 bool,
+			     c1 char,
+			   : i2, i22 long,
+			     bs2 bools (10),
+			   :
+			     s3 struct (i3 int,
+					case of
+					  : foo long
+					  else bar char
+					esac)
+			   else
+                             x stru2m
+                         esac,
+                         y stru3m);
+
+synmode m_xyzmode = struct (next ref m_xyzmode,
+			    i long);
+
+-- set mode locations
+dcl s1l set1 := ccc;
+dcl s2l nset1 := nb;
+
+-- range mode locations
+dcl rl1 r11 := 3;
+dcl rl2 r11 := lower(r11);
+dcl rl3 r11 := upper(r11);
+
+dcl rl5 r12 := 65530;
+dcl rl6 r12 := lower(r12);
+dcl rl7 r12 := upper(r12);
+
+--dcl rl9 r13 := 128;
+--dcl rl10 r13 := lower(r13);
+--dcl rl11 r13 := upper(r13);
+
+dcl rl13 r14 := -121;
+dcl rl14 r14 := lower(r14);
+dcl rl15 r14 := upper(r14);
+
+dcl rl17 r15 := -32720;
+dcl rl18 r15 := lower(r15);
+dcl rl19 r15 := upper(r15);
+
+dcl rl21 r16 := 2147483643;
+dcl rl22 r16 := lower(r16);
+dcl rl23 r16 := upper(r16);
+
+-- powerset mode locations
+dcl pl1 pm1 := [p1:p10];
+dcl pl2 pm1 := [];
+dcl pl3 pm1 := [p1, p10];
+dcl pl4 pm1 := [p1:p2, p4:p6, p8:p10];
+dcl pl5 pm1 := [p1:p4, p6, p8:p10];
+dcl pl6 pm1 := [p1, p3:p8, p10]; 
+
+dcl pl7 pm2 := [1:8];
+dcl pl8 pm3 := [-32768:32767];
+--dcl pl9 pm5 := [-2147483648:2147483647];
+
+-- reference mode locations
+dcl ref3l ref3;
+dcl ref4l ref4;
+dcl ref5l, ref6l, ref7l, ref8l ptr;
+dcl syn_intl1 syn_int := 42;
+dcl intl1 int := -42;
+
+-- synchronization mode locations
+dcl ev1l ev1m;
+dcl ev2l ev2m;
+dcl bu1l bu1m;
+dcl bu2l bu2m;
+
+-- timing mode locations
+dcl til1 time;
+
+-- string mode locations
+dcl strl1, strl2 strm2;
+dcl bstrl1 bstr1 := B'10101010101010101010';
+
+-- array mode locations
+dcl arrl1 arr1m;
+dcl arrl2 arr5m := [1, -1, 32767, -32768, 0, 10, 11, 12, 13, 42];
+dcl arrl3 arr6m := [(1:5): [(1:3): [(1:2): -2147483648]]];
+dcl arrl4 arr6m := [(1:2): [(1:3): [(1:2): -2147483648]],
+		      (3): [(1:3): [(1:2): 100]],
+		    (4:5): [(1:3): [(1:2): -2147483648]]];
+dcl arrl5 array(1:10) nset1;
+
+-- structure mode locations
+dcl strul1 stru1m := [-2147483648, 42, "12345678900987654321"];
+
+dummyfunc: proc();
+end dummyfunc;
+
+ref3l:=->pl1;		-- newmode ref
+ref4l:=->pl1;		-- synmode ref
+ref5l:=->pl1;		-- ptr
+
+ref6l:=->syn_intl1;	-- ref to synmode
+ref7l:=->intl1;		-- ref to predefined mode
+ref8l:=->pl1;		-- ref to newmode
+
+strl1 := "ha" // C'6e' // "s" // "i" // C'00';
+strl2 := C'00' // "ope";
+
+__print_event(addr(ev1l), addr("ev1l"));
+__print_event(addr(ev2l), addr("ev2l"));
+__print_buffer(addr(bu1l), addr("bu1m"));
+__print_buffer(addr(bu2l), addr("bu2m"));
+
+til1 := abstime(1970, 3, 12, 10, 43, 0);
+writetext(stdout, "lower(pm3) = %C; upper(pm3) = %C%..%/", 
+	          lower(pm3), upper(pm3));
+writetext(stdout, "lower(pm5) = %C; upper(pm5) = %C%..%/", 
+	          lower(pm5), upper(pm5));
+--writetext(stdout, "lower(pl9) = %C; upper(pl9) = %C%..%/", 
+--	          lower(pl9), upper(pl9));
+writetext(stdout, "date = %C%..%/", til1);
+
+writetext(stdout, "slice1 = %C%..%/", strl1(3 : 5));
+writetext(stdout, "slice2 = %C%..%/", strl2(0 : 3));
+--writetext(stdout, "slice3 = %C%..%/", strl1(0 up 20));
+writetext(stdout, "slice4 = %C%..%/", bstrl1(0));
+--writetext(stdout, "slice5 = %C%..%/", arrl3(1:5));
+
+
+writetext(stdout, "done.%/");
+
+dummyfunc();
+
+end tests1;
diff --git a/gdb/testsuite/gdb.chill/tests1.exp b/gdb/testsuite/gdb.chill/tests1.exp
new file mode 100644
index 0000000..3ede1eb
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tests1.exp
@@ -0,0 +1,822 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file tests various Chill values, expressions, and types.
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "tests1"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    verbose "loading file '$binfile'"
+    gdb_load $binfile
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break dummyfunc\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n" 
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+#
+# Args are:
+#
+#	First one is string to send_gdb to gdb
+#	Second one is string to match gdb result to
+#	Third one is an optional message to be printed
+
+proc test_print_accept { args } {
+    global gdb_prompt
+    global passcount
+    global verbose
+
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set sendthis [lindex $args 0]
+    set expectthis [lindex $args 1]
+    set result [gdb_test $sendthis ".* = ${expectthis}" $message]
+    if $result==0 {incr passcount}
+    return $result
+}
+
+# Testing printing of a specific value.  Increment passcount for
+# success or issue fail message for failure.  In both cases, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+
+# various tests if modes are treated correctly
+# using ptype
+proc test_modes {} {
+    global passcount
+
+    verbose "testing chill modes"
+    set passcount 0
+
+    # discrete modes
+    test_print_accept "ptype BYTE" "byte"
+    test_print_accept "ptype UBYTE" "ubyte"
+    test_print_accept "ptype INT" "int"
+    test_print_accept "ptype UINT" "uint"
+    test_print_accept "ptype LONG" "long"
+    test_print_accept "ptype ULONG" "ulong"
+    test_print_accept "ptype BOOL" "bool"
+    test_print_accept "ptype CHAR" "char"
+
+    test_print_accept "ptype set1" "SET \[(\]aaa, bbb, ccc\[)\]" \
+	"print unnumbered set mode"
+    test_print_accept "ptype nset1" "SET \[(\]na = 1, nb = 34, nc = 20\[)\]" \
+	"print numbered set mode"
+
+    # mp:
+    # display maybe in hex values ?
+    #
+    test_print_accept "ptype r11" "ubyte \\(0:255\\)" \
+	"print ubyte range mode"
+    test_print_accept "ptype r12" "uint \\(0:65535\\)" \
+	"print uint range mode"
+#    test_print_accept "ptype r13" "ulong \\(0:4294967295\\)" \
+#	"print ulong range mode"
+    test_print_accept "ptype r14" "byte \\(-128:127\\)" \
+	"print byte range mode"
+    test_print_accept "ptype r15" "int \\(-32768:32767\\)" \
+	"print int range mode"
+    test_print_accept "ptype r16" "long \\(-2147483648:2147483647\\)" \
+	"print long range mode"
+
+    test_print_accept "ptype r2" "set1 \\(bbb:ccc\\)" \
+	"print unnumbered set range mode"
+    test_print_accept "ptype r3" "nset1 \\(na:na\\)" \
+	"print numbered set range mode"
+    # really this order ?
+    # I'm not sure what should happen for the next two tests.
+    setup_xfail "*-*-*"
+    test_print_accept "ptype r4" "nset1 \\(nb = 34:nc = 20\\)" \
+	"print numbered set range mode"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype r5" "nset1 \\(na = 1, nb = 34, nc = 20\\)" \
+	"print numbered set range mode"
+
+    # powerset modes
+    test_print_accept "ptype pm1" \
+	"POWERSET SET \[(\]p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\[)\]" \
+	"print powerset mode 1"
+    test_print_accept "ptype pm2" "POWERSET byte \\(1:8\\)" \
+	"print powerset mode 2"
+    test_print_accept "ptype pm3" "POWERSET int \\(-32768:32767\\)" \
+	"print powerset mode 3"
+    test_print_accept "ptype pm4" "POWERSET long \\(-32768:32768\\)" \
+	"print powerset mode 4"
+    test_print_accept "ptype pm5" \
+	"POWERSET long \\(-2147483648:2147483647\\)" \
+	"print powerset mode 5"
+    
+    # reference modes
+    test_print_accept "ptype ref1" "REF pm1" \
+	"print reference to powerset mode"
+    test_print_accept "ptype ref2" "REF byte" \
+	"print reference to byte"
+    test_print_accept "ptype ref3" "PTR" \
+	"print free reference type"
+
+    # procedure modes
+    # FIXME: we have to talk about this ... 
+    test_print_accept "ptype prm1" \
+	"REF PROC \[(\]\[)\]" \
+	"print procedure mode 1"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype prm2" \
+	"REF PROC \[(\]bool in, int out long inout\[)\] RETURNS \[(\]char\[)\]" \
+	"print procedure mode 2"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype prm3" \
+	"REF PROC \[(\]pm1, ref loc\[)\] RETURNS \[(\]ref3\[)\]" \
+	"print procedure mode 3"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype prm4" \
+	"\[(\] \[)\] EXCEPTIONS \[(\]ex1, ex2, ex3\[)\]" \
+	"print procedure mode 4"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype prm5" \
+	"REF PROC \[(\]r11, r16 inout, r5 out\[)\] RETURNS \[(\]r2\[)\] EXCEPTIONS \[(\]ex1\[)\]" \
+	"print procedure mode 5"
+
+    # synchronization modes
+    # FIXME: since gdb doesn't process events & buffers so far, this has be 
+    #        filled later...
+    xfail "synchronization mode handling"
+
+    # timing modes
+    test_print_accept "ptype DURATION" "duration"
+    test_print_accept "ptype TIME" "time"
+
+    # string modes
+    # some tests are done in chillvars.exp
+    test_print_accept "ptype strm1" "CHARS \\(5\\)" "print char string mode"
+    test_print_accept "ptype strm2" "CHARS \[(\]7\[)\] VARYING" \
+	"print varying char string mode"
+    test_print_accept "ptype bstr1" "BOOLS \\(20\\)" "print bit string mode"
+
+    test_print_accept "ptype B'000'" "BOOLS \\(3\\)" "bit string literal"
+    test_print_accept "ptype B'11110000'" "BOOLS \\(8\\)" "bit string literal"
+    # FIXME: adjust error message
+    gdb_test "ptype B'00110211'" {.*Too-large digit.*[.]} \
+	"reject invalid bitstring"
+
+    # array modes
+    # some tests are done in chillvars.exp
+    test_print_accept "ptype arr1m" "ARRAY \\(1:100\\) set1" \
+	"print array mode 1"
+    test_print_accept "ptype arr2m" "ARRAY \\(1:100\\) ARRAY \\(1:100\\) set1"\
+	"print array mode 2"
+    test_print_accept "ptype arr3m" "ARRAY \\(0:255\\) ARRAY \\(0:65535\\) ARRAY \\(-128:127\\) set1" \
+	"print array mode 3"
+    setup_xfail "*-*-*"
+    test_print_accept "ptype arr4m" "ARRAY \\(b:c\\) ARRAY \\(na = 1:na = 1\\) ARRAY \\(nc:nb\\) ARRAY \\(na = 1:nc = 20\\) POWERSET SET \[(\]p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\[)\]" \
+	"print array mode 4"
+    
+    # structure modes
+    # some checks are in chillvars.exp
+    # setup_xfail "*-*-*"
+    test_print_accept "ptype stru1m" "STRUCT \\(.*a long,.*b long,.*CASE OF.*:.*ch1 CHARS \\(20\\).*:.*ch2 CHARS \\(10\\).*ELSE.*ch3 CHARS \\(1\\).*ESAC.*\\)" \
+	"print structure mode 1"
+    #setup_xfail "*-*-*"
+    test_print_accept "ptype stru2m" "STRUCT \\(.*f set1,.*CASE OF.*:.*ch1 CHARS \\(20\\).*:.*ch2 CHARS \\(10\\) VARYING.*ELSE.*ch3 CHARS \\(0\\) VARYING.*ESAC.*\\)" \
+	"print structure mode 2"
+    #setup_xfail "*-*-*"
+    test_print_accept "ptype stru3m" "STRUCT \\(.*f r3,.*CASE OF.*:.*ch1 CHARS \\(20\\).*ESAC.*\\)" \
+	"print structure mode 3"
+    # setup_xfail "*-*-*"
+    test_print_accept "ptype stru4m" "STRUCT \\(.*i long,.*CASE OF.*:.*i1 int,.*i11 int,.*b1 bool,.*c1 char.*:.*i2 long,.*i22 long,.*bs2 BOOLS \\(10\\).*:.*s3 STRUCT \\(.*i3 int,.*CASE OF.*:.*foo long.*ELSE.*bar char.*ESAC.*\\).*ELSE.*x stru2m.*ESAC,.*y stru3m.*\\)" \
+	"print structure mode 4"
+   
+    
+    if $passcount then {
+	pass "$passcount correct modes printed"
+    }
+}
+
+# various tests if locations are treated correctly
+# read access using ptype, print, whatis
+proc test_locations {} {
+    global passcount
+
+    set passcount 0
+    verbose "testing read access to locations"
+    # various location tests can be found in chillvars.exp
+
+    # set locations
+    test_print_accept "ptype s1l" "SET \\(aaa, bbb, ccc\\)" \
+	"print mode of set location"
+    test_print_accept "whatis s1l" "set1" \
+	"print modename of set location"
+    test_print_accept "print s1l" "ccc" "print set location"
+    test_print_accept "ptype s2l" "SET \\(na = 1, nb = 34, nc = 20\\)" \
+	"print mode of numbered set location"
+    test_print_accept "whatis s2l" "nset1" \
+	"print mode name of numbered set location"
+    test_print_accept "print s2l" "nb" "print numberes set location"
+
+    # range modes
+    test_print_accept "ptype rl1" "ubyte \\(0:255\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl1" "r11" \
+	"print mode name of range location"
+    test_print_accept "print rl1" "3" \
+	"print range location"
+
+    test_print_accept "ptype rl2" "ubyte \\(0:255\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl2" "r11" \
+	"print mode name of range location"
+    test_print_accept "print rl2" "0" \
+	"print range location"
+
+    test_print_accept "ptype rl3" "ubyte \\(0:255\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl3" "r11" \
+	"print mode name of range location"
+    test_print_accept "print rl3" "255" \
+	"print range location"
+
+    test_print_accept "ptype rl5" "uint \\(0:65535\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl5" "r12" \
+	"print mode name of range location"
+    test_print_accept "print rl5" "65530" \
+	"print range location"
+
+    test_print_accept "ptype rl6" "uint \\(0:65535\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl6" "r12" \
+	"print mode name of range location"
+    test_print_accept "print rl6" "0" \
+	"print range location"
+	
+    test_print_accept "ptype rl7" "uint \\(0:65535\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl7" "r12" \
+	"print mode name of range location"
+    test_print_accept "print rl7" "65535" \
+	"print range location"
+	
+#     test_print_accept "ptype rl9" "ulong \\(0:4294967295\\)" \
+# 	"print mode of range location"
+#     test_print_accept "whatis rl9" "r13" \
+# 	"print mode name of range location"
+#     test_print_accept "print rl9" "128" \
+# 	"print range location"
+	
+#     test_print_accept "ptype rl10" "ulong \\(0:4294967295\\)" \
+# 	"print mode of range location"
+#     test_print_accept "whatis rl10" "r13" \
+# 	"print mode name of range location"
+#     test_print_accept "print rl10" "0" \
+# 	"print range location"
+	
+#     test_print_accept "ptype rl11" "ulong \\(0:4294967295\\)" \
+# 	"print mode of range location"
+#     test_print_accept "whatis rl11" "r13" \
+# 	"print mode name of range location"
+#     test_print_accept "print rl11" "4294967295" \
+# 	"print range location"
+
+    test_print_accept "ptype rl13" "byte \\(-128:127\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl13" "r14" \
+	"print mode name of range location"
+    test_print_accept "print rl13" "-121" \
+	"print range location"
+
+    test_print_accept "ptype rl14" "byte \\(-128:127\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl14" "r14" \
+	"print mode name of range location"
+    test_print_accept "print rl14" "-128" \
+	"print range location"
+
+    test_print_accept "ptype rl15" "byte \\(-128:127\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl15" "r14" \
+	"print mode name of range location"
+    test_print_accept "print rl15" "127" \
+	"print range location"
+
+    test_print_accept "ptype rl17" "int \\(-32768:32767\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl17" "r15" \
+	"print mode name of range location"
+    test_print_accept "print rl17" "-32720" \
+	"print range location"
+
+    test_print_accept "ptype rl18" "int \\(-32768:32767\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl18" "r15" \
+	"print mode name of range location"
+    test_print_accept "print rl18" "-32768" \
+	"print range location"
+
+    test_print_accept "ptype rl19" "int \\(-32768:32767\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl19" "r15" \
+	"print mode name of range location"
+    test_print_accept "print rl19" "32767" \
+	"print range location"
+
+    test_print_accept "ptype rl21" "long \\(-2147483648:2147483647\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl21" "r16" \
+	"print mode name of range location"
+    test_print_accept "print rl21" "2147483643" \
+	"print range location"
+
+    test_print_accept "ptype rl22" "long \\(-2147483648:2147483647\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl22" "r16" \
+	"print mode name of range location"
+    test_print_accept "print rl22" "-2147483648" \
+	"print range location"
+
+    test_print_accept "ptype rl23" "long \\(-2147483648:2147483647\\)" \
+	"print mode of range location"
+    test_print_accept "whatis rl23" "r16" \
+	"print mode name of range location"
+    test_print_accept "print rl23" "2147483647" \
+	"print range location"
+    
+    # powerset locations
+    test_print_accept "ptype pl1" \
+	"POWERSET SET \\(p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\\)" \
+	"print mode of powerset location 1"
+    test_print_accept "whatis pl1" "pm1" \
+	"print mode mode name of powerset location"
+    test_print_accept "print pl1" \
+	"\[\[\]p1:p10\[\]\]" \
+	"print powerset location 1"
+    test_print_accept "print pl2" {\[\]} \
+	"print powerset location 2"
+    test_print_accept "print pl3" "\[\[\]p1, p10\[\]\]" \
+    	"print powerset location 3"
+    test_print_accept "print pl4" {\[p1:p2, p4:p6, p8:p10\]} \
+	"print powerset location 4"
+    test_print_accept "print pl5" {\[p1:p4, p6, p8:p10\]} \
+	"print powerset location 5"
+    test_print_accept "print pl6" {\[p1, p3:p8, p10\]} \
+	"print powerset location 6"
+    
+    test_print_accept "ptype pl7" \
+	"POWERSET byte \\(1:8\\)" \
+	"print mode of byte powerset location"
+    test_print_accept "whatis pl7" "pm2" \
+	"print modename of byte powerset location"
+    test_print_accept "print pl7" {\[1:8\]} \
+	"print powerset location 7"
+    
+    test_print_accept "ptype pl8" \
+	"POWERSET int \\(-32768:32767\\)" \
+	"print mode of int powerset location"
+    test_print_accept "whatis pl8" "pm3" \
+	"print modename of int powerset location"
+    test_print_accept "print pl8" {\[-32768:32767\]} \
+	"print powerset location 8"
+    
+#    test_print_accept "ptype pl9" \
+#	"POWERSET long \\(-2147483648:2147483647\\)" \
+#	"print mode of long powerset location"
+#    test_print_accept "whatis pl9" "pm5" \
+#	"print modename of long powerset location"
+#    test_print_accept "print pl9" {\[-2147483648:2147483647\]} \
+#	"print powerset location 9"
+    
+    # reference modes
+    test_print_accept "ptype ref3l" "PTR" "print mode of reference location"
+    # setup_xfail "*-*-*"
+    test_print_accept "whatis ref3l" "ref3" \
+	"print modename of reference location"
+    # setup_xfail "*-*-*"
+    test_print_accept "print ref3l" "ref3\\(H'.*\\)" \
+	"print reference location"
+    test_print_accept "ptype ref4l" "PTR" "print mode of reference location"
+    # setup_xfail "*-*-*"
+    test_print_accept "whatis ref4l" "ref4" \
+	"print modename of reference location"
+    # setup_xfail "*-*-*"
+    test_print_accept "print ref4l" "ref4\\(H'.*\\)" \
+	"print reference location"
+    test_print_accept "ptype ref5l" "PTR" "print mode of reference location"
+    test_print_accept "whatis ref5l" "PTR" \
+	"print modename of reference location"
+    test_print_accept "print ref5l" "PTR\\(H'.*\\)" \
+	"print reference location"
+
+    # dereference a little bit..
+    test_print_accept "print ref6l->syn_int" "42" \
+	"dereference reference to synmode location"
+    test_print_accept "print ref7l->int" "-42" \
+	"dereference reference to predefined mode location"
+    test_print_accept "print ref8l->pm1" \
+	"\[\[\]p1:p10\[\]\]" \
+	"dereference reference to newmode location"
+
+    # synchronization mode locations
+    # FIXME: synchronization modes are not supported so far...
+    xfail "no synchronization mode location support, not implemented yet"
+    
+    # timing mode locations
+    # FIXME: callbacks to abstime, inttime not implemented
+    xfail "timing modes not implemented properly yet"
+
+    # char string locations
+    # some tests are don in chillvars.exp
+    test_print_accept "ptype strl1" \
+	"CHARS \\(7\\) VARYING" \
+	"print varying string location"
+    test_print_accept "whatis strl1" "strm2" \
+	"print string locationa mode name"
+    test_print_accept "print strl1" \
+	{\"hansi\^\(0\)\"} \
+	"print string location"
+    # string elements
+    test_print_accept "print strl1(0)" "\'h\'" \
+	"print string element 1"
+    test_print_accept "print strl1(5)" {'\^[(]0[)]'} \
+	"print string element 2"
+    test_print_accept "print strl1(3)" "\'s\'" \
+	"print string element 3"
+    test_print_accept "ptype strl1(0)" "char" \
+	"print mode of string element"
+    # slices
+    test_print_accept "print strl1(3:4)" "\"si\"" \
+	"print string slice 1"
+    test_print_accept "print strl1(0:5)" \
+	{\"hansi\^\(0\)\"} \
+	"print string slice 2"
+    test_print_accept "print strl1(0:0)" "\"h\"" \
+	"print string slice 3"
+    test_print_accept "print strl1(0 up 6)" \
+	{\"hansi\^\(0\)\"} \
+	"print string slice 4"
+    # FIXME: adjust error message, when implented
+    gdb_test "print strl1(6 up 1)" \
+	".*slice.*out of range.*" \
+	"print invalid string slice length"
+    gdb_test "print strl1(-1 up 5)" \
+	".*slice.*out of range.*" \
+	"print invalid string slice length"
+    gdb_test "print strl1(-1:5)" \
+	".*slice.*out of range.*" \
+	"print invalid string slice"
+    gdb_test "print strl1(-1:7)" \
+	".*slice.*out of range.*" \
+	"print invalid string slice"
+    gdb_test "print strl1(0 up -1)" \
+	".*slice.*out of range.*" \
+	"print invalid string slice length"
+    gdb_test "print strl1(0 up 0)" {""}
+    
+    # bitstring locations
+    test_print_accept "ptype bstr1" \
+	"BOOLS \\(20\\)" \
+	"print mode of bitstring location"
+    test_print_accept "whatis bstrl1" "bstr1" \
+	"print mode name of bitstring location"
+    test_print_accept "print bstrl1" \
+	"B'10101010101010101010'" \
+	"print bitstring location"
+    
+    test_print_accept "ptype bstrl1(0)" "bool|BOOL" \
+	"print mode of bitstring element"
+    test_print_accept "print bstrl1(0)" "TRUE" \
+	"print bitstring element 1"
+    test_print_accept "print bstrl1(19)" "FALSE" \
+	"print bitstring element 2"
+    test_print_accept "print bstrl1(10)" "TRUE" \
+	"print bitstring element 3"
+    
+    test_print_accept "print bstrl1(0:19)" \
+	"B'10101010101010101010'" \
+	"print bitstring location slice 1"
+    test_print_accept "print bstrl1(0:0)" \
+	"B'1'" \
+	"print bitstring location slice 2"
+    test_print_accept "print bstrl1(3:9)" \
+	"B'0101010'" \
+	"print bitstring location slice 3"
+    test_print_accept "print bstrl1(0 up 20)" \
+	"B'10101010101010101010'" \
+	"print bitstring location slice 4"
+    test_print_accept "print bstrl1(19 up 1)" \
+	"B'0'" \
+	"print bitstring location slice 5"
+    gdb_test "print bstrl1(20 up 1)" \
+	".*slice out of range.*" \
+	"print invalid bitstring slice (20 up 1)"
+    gdb_test "print bstrl1(-4:5)" \
+	".*slice out of range.*" \
+	"print invalid bitstring slice (-4:5)"
+    gdb_test "print bstrl1(-1:up 1)" \
+	".*invalid expression syntax.*" \
+	"print invalid bitstring slice (-1:ip 1)"
+    gdb_test "print bstrl1(-1:20)" \
+	".*slice out of range.*" \
+	"print invalid bitstring slice (-1:20)"
+    gdb_test "print bstrl1(0 up -1)" \
+	".*slice out of range.*" \
+	"print invalid bitstring slice (0 up -1)"
+    test_print_accept "print bstrl1(4 up 0)" "B''"
+    
+    # array mode locations
+    gdb_test_exact "ptype arrl1" \
+	"ARRAY (1:100) set1" \
+	"print mode of array location"
+    gdb_test "whatis arrl1" "arr1m" \
+	"print mode name of array location"
+    gdb_test_exact "print arrl1" {[(1:100): aaa]} \
+	"print array location"
+    test_print_accept "ptype arrl1(1)" \
+	"SET \\(aaa, bbb, ccc\\)" \
+	"print mode of array element"
+    gdb_test_exact "print arrl3" \
+	{[(1:5): [(1:3): [(1:2): -2147483648]]]} \
+	"print array location 2"
+    gdb_test_exact "print arrl3(1)" \
+	{[(1:3): [(1:2): -2147483648]]} \
+	"print array location 3"
+    gdb_test_exact "ptype arrl3(1)" \
+	{ARRAY (1:3) ARRAY (1:2) long} \
+	"print mode of array element"
+    test_print_accept "print arrl3(5)" \
+	{\[\(1:3\): \[\(1:2\): -2147483648\]\]} \
+	"print array location 4"
+    test_print_accept "print arrl3(1,1)" \
+	{\[\(1:2\): -2147483648\]} \
+	"print array location 5"
+    test_print_accept "ptype arrl3(1,1)" \
+	{ARRAY \(1:2\) long} \
+	"print mode of array element"
+    test_print_accept "print arrl3(5,3)" \
+	{\[\(1:2\): -2147483648\]} \
+	"print array location 6"
+    test_print_accept "print arrl3(1,1,1)" \
+	"-2147483648" \
+	"print array location 7"
+    test_print_accept "print arrl3(5,3,2)" \
+	"-2147483648" \
+	"print array location 8"
+    test_print_accept "print arrl3(1)(3)(2)" \
+	"-2147483648" \
+	"print array location 9"
+
+    # reject the following range fails
+    # FIXME: adjust error messages
+    gdb_test "print arrl3(-1)" \
+	".*out of range.*" \
+	"check invalid array indices 1"
+    gdb_test "print arrl3(6)" \
+	".*out of range.*" \
+	"check invalid array indices 2"
+    gdb_test "print arrl3(0,0)" \
+	".*out of range.*" \
+	"check invalid array indices 3"
+    gdb_test "print arrl3(1,0)" \
+	".*out of range.*" \
+	"check invalid array indices 4"
+    gdb_test "print arrl3(1,4)" \
+	".*out of range.*" \
+	"check invalid array indices 5"
+    gdb_test "print arrl3(6,4)" \
+	".*out of range.*" \
+	"check invalid array indices 6"
+    gdb_test "print arrl3(1,1,0)" \
+	".*out of range.*" \
+	"check invalid array indices 7"
+    gdb_test "print arrl3(6,4,0)" \
+	".*out of range.*" \
+	"check invalid array indices 8"
+    gdb_test "print arrl3(1,1,3)" \
+	".*out of range.*" \
+	"check invalid array indices 9"
+
+    gdb_test "print arrl3(0)(0)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 10"
+    gdb_test "print arrl3(1)(0)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 11"
+    gdb_test "print arrl3(1)(4)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 12"
+    gdb_test "print arrl3(6)(4)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 13"
+    gdb_test "print arrl3(1)(1)(0)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 14"
+    gdb_test "print arrl3(6)(4)(0)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 15"
+    gdb_test "print arrl3(1)(1)(3)" \
+	".* array or string index out of range.*" \
+	"check invalid array indices 16"
+    
+    # slices
+    test_print_accept "print arrl4(1:3)" \
+	{\[\(1:2\): \[\(1:3\): \[\(1:2\): -2147483648\]\], \(3\): \[\(1:3\): \[\(1:2\): 100\]\]\]} \
+	"print array slice 1"
+    test_print_accept "ptype arrl4(1:3)" \
+	{ARRAY \(1:3\) ARRAY \(1:3\) ARRAY \(1:2\) long} \
+	"print mode of array slice"
+# The next one is bogus:
+#    test_print_accept "print arrl4(5, 2:3, 1)" \
+#	# FIXME: maybe the '(1): ' in the inner tupel should be omitted ? \
+#	{\[(2): \[\(1\): 100\], \(3\):\[\(1\): 100\]\]} \
+#	"print array slice 2"
+    test_print_accept "print arrl4(1 up 4)" \
+	{\[\(1:2\): \[\(1:3\): \[\(1:2\): -2147483648\]\], \(3\): \[\(1:3\): \[\(1:2\): 100\]\], \(4\): \[\(1:3\): \[\(1:2\): -2147483648\]\]\]} \
+	"print array slice 3"
+# The next two are bogus:
+#    test_print_accept "print arrl4(3, 2 up 1)" \
+#	{\[\(2:3\): \[\(1:2\): 100\]\]} \
+#	"print array slice 4"
+#    test_print_accept "print arrl4(1:2, 1 up 1, 2)" \
+#	{\[\(1\): \[\(1\): \[\(2\): -2147483648\], \(2\): \[\(2\): -2147483648\]\], \(2\): \[\(1\): \[\(2\): -2147483648\], \(2\): \[\(2\): -2147483648\]\]\]} \
+#	"print array slice 4"
+    # reject invalid slices
+    # FIXME: adjust error messages
+    gdb_test "print arrl4(5:6)" \
+	".*slice out of range.*" \
+	"check invalid range 1"
+    gdb_test "print arrl4(0:1)" \
+	".*slice out of range.*" \
+	"check invalid range 2"
+    gdb_test "print arrl4(0:6)" \
+	".*slice out of range.*" \
+	"check invalid range 3"
+    gdb_test "print arrl4(3:2)" \
+	".*slice out of range.*" \
+	"check invalid range 4"
+    gdb_test "print arrl4(1,3:4)" \
+	".*syntax error.*" \
+	"check invalid range 5"
+    gdb_test "print arrl4(1,0:1)" \
+	".*syntax error.*" \
+	"check invalid range 6"
+    gdb_test "print arrl4(1,0:4)" \
+	".*syntax error.*" \
+	"check invalid range 7"
+    gdb_test "print arrl4(1,3:2)" \
+	".*syntax error.*" \
+	"check invalid range 8"
+    gdb_test "print arrl4(5 up 2)" \
+	".*slice out of range.*" \
+	"check invalid range 9"
+    gdb_test "print arrl4(-1 up 1)" \
+	".*slice out of range.*" \
+	"check invalid range 10"
+    gdb_test "print arrl4(-1 up 7)" \
+	".*slice out of range.*" \
+	"check invalid range 11"
+    gdb_test "print arrl4(1 up 0)" \
+	".*slice out of range.*" \
+	"check invalid range 12"
+    gdb_test "print arrl4(1,3 up 1)" \
+	".*syntax error.*" \
+	"check invalid range 13"
+    gdb_test "print arrl4(1,-1 up 1)" \
+	".*syntax error.*" \
+	"check invalid range 14"
+    gdb_test "print arrl4(1,-1 up 5)" \
+	".*syntax error.*" \
+	"check invalid range 15"
+    gdb_test "print arrl4(1,2 up 0)" \
+	".*syntax error.*" \
+	"check invalid range 16"
+
+    # structure modes
+    # some tests are in chillvars.exp
+    # FIXME: no tag processing implemented do maybe adjust these tests
+    setup_xfail "*-*-*"
+    test_print_accept "ptype stru1m" \
+	"STRUCT \\(.*a long,.*b long,.*CASE b OF.*\\(42\\):.*ch1 CHARS\\(20\\),.*\\(52\\):.*ch2 CHARS\\(10\\).*ELSE.*ch3 CHARS\\(1\\).*ESAC.*\\)" \
+	"print mode of structure location 1"
+    test_print_accept "whatis strul1" "stru1m" \
+	"print mode name of structure location 1"
+    setup_xfail "*-*-*"
+    test_print_accept "print strul1" \
+	{\[\.a: -2147483648, \.b: 42, \.\(b\): \{\(42\) = \[\.ch1: \"12345678900987654321\"\], \(52\) = \[\.ch2: \"1234567890\"\], (else) = \[\.ch3: \"1\"\]\}\]} \
+	"print structure location 1"
+    test_print_accept "print strul1.a" \
+	"-2147483648" \
+	"print field of structure location 1"
+    test_print_accept "print strul1.b" "42" \
+	"print field of structure location 1"
+    test_print_accept "print strul1.ch1" \
+	"\"12345678900987654321\"" \
+	"print field of structure location 1"
+    # setup_xfail "*-*-*"
+    test_print_accept "print strul1.ch2" \
+	"\"1234567890\"" \
+	"print field of structure location 1"
+    # setup_xfail "*-*-*"
+    test_print_accept "print strul1.ch3" \
+	"\"1\"" \
+	"print field of structure location 1"
+    
+    if $passcount then {
+	pass "$passcount correct locations printed"
+    }
+}
+
+# This is chill/9434
+
+proc test_9434 {} {
+    global passcount
+
+    verbose "testing pr-9434"
+
+    test_print_accept "ptype m_xyzmode" "STRUCT \\(.*next REF m_xyzmode,.*i long.*\\)"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if [set_lang_chill] then {
+    test_modes
+    test_locations
+    test_9434
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/tests2.ch b/gdb/testsuite/gdb.chill/tests2.ch
new file mode 100644
index 0000000..1596f3b
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tests2.ch
@@ -0,0 +1,193 @@
+-- Copyright (C) 1992 Free Software Foundation, Inc.
+
+-- This program is free software; you can redistribute it and/or modify
+-- it under the terms of the GNU General Public License as published by
+-- the Free Software Foundation; either version 2 of the License, or
+-- (at your option) any later version.
+-- 
+-- This program is distributed in the hope that it will be useful,
+-- but WITHOUT ANY WARRANTY; without even the implied warranty of
+-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-- GNU General Public License for more details.
+-- 
+-- You should have received a copy of the GNU General Public License
+-- along with this program; if not, write to the Free Software
+-- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+-- Please email any bugs, comments, and/or additions to this file to:
+-- bug-gdb@prep.ai.mit.edu
+
+--
+-- test program 2 (refer to tests2.exp)
+--
+
+tests2: module;
+
+-- testpattern
+syn pat1 ulong = H'aaaaaaaa;
+syn pat2 ulong = H'55555555;
+
+-- discrete modes
+newmode bytem = struct ( 
+	p1 ulong,
+	m byte,
+	p2 ulong);
+newmode ubytem = struct ( 
+	p1 ulong,
+	m ubyte,
+	p2 ulong);
+newmode intm = struct ( 
+	p1 ulong,
+	m int,
+	p2 ulong);
+newmode uintm = struct ( 
+	p1 ulong,
+	m uint,
+	p2 ulong);
+newmode longm = struct ( 
+	p1 ulong,
+	m long,
+	p2 ulong);
+newmode ulongm = struct ( 
+	p1 ulong,
+	m ulong,
+	p2 ulong);
+newmode boolm = struct ( 
+	p1 ulong,
+	m bool,
+	p2 ulong);
+newmode charm1 = struct ( 
+	p1 ulong,
+	m char(4),
+	p2 ulong);
+newmode charm2 = struct ( 
+	p1 ulong,
+	m char(7),
+	p2 ulong);
+newmode charm3 = struct ( 
+	p1 ulong,
+	m char(8) varying,
+	p2 ulong);
+newmode charm4 = struct ( 
+	p1 ulong,
+	m char,
+	p2 ulong);
+newmode bitm1 = struct ( 
+	p1 ulong,
+	m bit(8),
+	p2 ulong);
+newmode bitm2 = struct ( 
+	p1 ulong,
+	m bit(10),
+	p2 ulong);
+newmode setm1 = struct ( 
+	p1 ulong,
+	m set (a, b, c, d, e, f, g, h),
+	p2 ulong);
+newmode nset1 = struct ( 
+	p1 ulong,
+	m set (na = 2147483648, nb = 1024, nc = 4294967295),
+	p2 ulong);
+newmode rm1 = struct ( 
+	p1 ulong,
+	m range (lower(byte):upper(byte)),
+	p2 ulong);
+newmode rm2 = struct ( 
+	p1 ulong,
+	m range (lower(int):upper(int)),
+	p2 ulong);
+newmode rm3 = struct ( 
+	p1 ulong,
+	m range (lower(long):upper(long)),
+	p2 ulong);
+newmode pm1 = struct ( 
+	p1 ulong,
+	m powerset set (pa, pb, pc, pd, pe, pf, pg, ph),
+	p2 ulong);
+newmode pm2 = struct ( 
+	p1 ulong,
+	m powerset int (1:32),
+	p2 ulong);
+-- this should be rejected by the gnuchill compiler ! 
+newmode pm3 = struct ( 
+	p1 ulong,
+--	m powerset long (lower(long): upper(long)),
+	p2 ulong);
+newmode refm1 = struct ( 
+	p1 ulong,
+	m ptr,
+	p2 ulong);
+newmode refm2 = struct ( 
+	p1 ulong,
+	m ref bytem,
+	p2 ulong);
+newmode prm1 = struct ( 
+	p1 ulong,
+	m proc (),
+	p2 ulong);
+newmode tim1 = struct ( 
+	p1 ulong,
+	m time,
+	p2 ulong);
+newmode tim2 = struct ( 
+	p1 ulong,
+	m duration,
+	p2 ulong);
+newmode rem1 = struct ( 
+	p1 ulong,
+	m real,
+	p2 ulong);
+newmode rem2 = struct ( 
+	p1 ulong,
+	m long_real,
+	p2 ulong);
+newmode arrm1 = struct ( 
+	p1 ulong,
+	m array(1:3, 1:2) int,
+	p2 ulong);
+newmode strum1 = struct ( 
+	p1 ulong,
+	m struct (a, b int, ch char(4)),
+	p2 ulong);
+
+
+-- dummyfunction for breakpoints
+dummyfunc: proc();
+end dummyfunc;
+
+
+dcl b1 bytem init := [pat1, -128, pat2];
+dcl ub1 ubytem init := [pat1, 0, pat2];
+dcl i1 intm init := [pat1, -32768, pat2];
+dcl ui1 uintm init := [pat1, 0, pat2];
+dcl l1 longm init := [pat1, -2147483648, pat2];
+dcl ul1 ulongm init := [pat1, 0, pat2];
+dcl bo1 boolm init := [pat1, true, pat2];
+dcl c1 charm1 init := [pat1, "1234", pat2];
+dcl c2 charm2 init := [pat1, "1234567", pat2];
+dcl c3 charm3 init := [pat1, "12345678", pat2];
+dcl c4 charm4 init := [pat1, C'00', pat2];
+dcl bi1 bitm1 init := [pat1, B'01011010', pat2];
+dcl bi2 bitm2 init := [pat1, B'1010110101', pat2];
+dcl se1 setm1 init := [pat1, a, pat2];
+dcl nse1 nset1 init := [pat1, na, pat2];
+dcl r1 rm1 init := [pat1, -128, pat2];
+dcl r2 rm2 init := [pat1, -32768, pat2];
+dcl r3 rm3 init := [pat1, -2147483648, pat2];
+dcl p1 pm1 init := [pat1, [pa], pat2];
+dcl p2 pm2 init := [pat1, [1], pat2];
+-- dcl p3 pm3 init := [pat1, [-1], pat2]; -- FIXME: bug in gnuchill
+dcl ref1 refm1 init := [pat1, null, pat2];
+dcl ref2 refm2 init := [pat1, null, pat2];
+dcl pr1 prm1; 
+dcl ti1 tim1 init := [pat1, 0, pat2];
+dcl ti2 tim2 init := [pat1, 0, pat2];
+dcl re1 rem1 init := [pat1, 0.0, pat2];
+dcl re2 rem2 init := [pat1, 0.0, pat2];
+dcl arrl1 arrm1 init:=[pat1, [(1:3): [0,0]], pat2];
+dcl strul1 strum1 init := [pat1, [.a: 0, .b: 0, .ch: "0000"], pat2];
+
+pr1 := [pat1, dummyfunc, pat2];
+dummyfunc();
+
+end tests2;
diff --git a/gdb/testsuite/gdb.chill/tests2.exp b/gdb/testsuite/gdb.chill/tests2.exp
new file mode 100644
index 0000000..46c4821
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tests2.exp
@@ -0,0 +1,271 @@
+# Copyright (C) 1992, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set prms_id 0
+set bug_id 0
+
+# Set the current language to chill.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+set testfile "tests2"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+global infinity
+if [istarget "i*86-*-sysv4*"] then {
+    set infinity "inf"
+} else {
+    set infinity "Infinity"
+}
+
+proc set_lang_chill {} {
+    global gdb_prompt
+    global binfile objdir subdir
+
+    if ![file exists $objdir/$subdir/$binfile] then {
+	return 0
+    }
+    verbose "loading file '$objdir/$subdir/$binfile'"
+    gdb_load $objdir/$subdir/$binfile
+
+    send_gdb "set language chill\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+	timeout { fail "set language chill (timeout)" ; return 0 }
+    }
+
+    send_gdb "show language\n"
+    gdb_expect {
+	-re ".* source language is \"chill\".*$gdb_prompt $" {
+	    pass "set language to \"chill\""
+	    send_gdb "break dummyfunc\n"
+	    gdb_expect {
+		-re ".*$gdb_prompt $" {
+		    send_gdb "run\n"
+		    gdb_expect -re ".*$gdb_prompt $" {}
+		    return 1
+		}
+		timeout {
+		    fail "can't set breakpoint (timeout)"
+		    return 0
+		}
+	    }
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "setting language to \"chill\""
+	    return 0
+	}
+	timeout {
+	    fail "can't show language (timeout)"
+	    return 0
+	}
+    }
+}
+
+# checks if structure was accessed correctly
+proc test_write { args } {
+    global gdb_prompt
+
+    if [llength $args]==5 then {
+	set message [lindex $args 4]
+	set extended [lindex $args 3]
+	set matchval [lindex $args 2]
+    } elseif [llength $args]==4 then {
+	set message [lindex $args 3]
+	set matchval [lindex $args 2]
+	set extended ""
+    } elseif [llength $args]==3 then {
+	set message [lindex $args 2]
+	set extended ""
+    } else {
+	warning "test ($args) write called with wrong number of arguments"
+	return 
+    }
+
+    set location [lindex $args 0]
+    set value [lindex $args 1]
+    if ![info exists matchval] then {
+	set matchval $value
+    }
+    verbose "loc: $location, val: $value, msg: $message, ext: $extended, match: $matchval"
+
+    verbose "setting var $value..."
+    send_gdb "set var $location.m$extended := $value\n"
+    gdb_expect -re ".*$gdb_prompt $" {}
+    gdb_test "print $location" \
+      ".*= \[\[\]\\.p1: 2863311530, \\.m: $matchval, \\.p2: 1431655765\[\]\]"\
+      "$message"
+}
+
+# test write access from gdb (setvar x:=y) from gdb
+proc write_access { } {
+    global infinity
+
+    verbose "testing write access to locations"
+    
+    # discrete modes
+    test_write b1 127 "byte write 1"
+    test_write b1 -128 "byte write 2"
+    test_write b1 0 "byte write 3"
+    test_write ub1 255 "ubyte write 1"
+    test_write ub1 0 "ubyte write 2"
+    test_write ub1 42 "ubyte write 3"
+    test_write i1 32767 "int write 1"
+    test_write i1 -32768 "int write 2"
+    test_write i1 0 "int write 3"
+    test_write ui1 65535 "uint write 1"
+    test_write ui1 0 "uint write 2"
+    test_write ui1 123 "uint write 3"
+    test_write l1 2147483647 "long write 1"
+    test_write l1 -2147483648 "long write 2"
+    test_write l1 0 "long write 3"
+    test_write ul1 4294967295 "ulong write 1"
+    test_write ul1 0 "ulong write 2"
+    test_write ul1 1000000 "ulong write 3"
+    test_write bo1 FALSE "bool write 1"
+    test_write bo1 TRUE "bool write 2"
+    test_write c1 \"1234\" "char write 1"
+    test_write c2 \"1234567\" "char write 2"
+    test_write c3 \"654321\" "char write 3"
+    test_write c4 C'65' 'e' "char write 4"
+    test_write bi1 B'10100101' "bitstring write 1"
+    test_write bi2 B'0101001010' "bitstring write 2"
+    test_write se1 a "set write 1"
+    test_write se1 h "set write 2"
+    # The following two use numbered sets with too-large values.
+    setup_xfail "*-*-*"
+    test_write nse1 nb "numbered set write 1"
+    setup_xfail "*-*-*"
+    test_write nse1 nc "numbered set write 2"
+    test_write r1 127 "range write 1"
+    test_write r2 32767 "range write 2"
+    test_write r3 2147483647 "range write 3"
+
+    # powerset modes
+    test_write p1 {[pa:ph]} {\[pa:ph\]} "powerset write 1"
+    test_write p1 {[pa, pc:pf, ph]} {\[pa, pc:pf, ph\]} "powerset write 2"
+    test_write p1 {[pa, pc, pe, pg]} {\[pa, pc, pe, pg\]} "powerset write 3"
+    test_write p1 {[]} {\[\]} "powerset write 4"
+    test_write p2 {[1:32]} {\[1:32\]} "powerset write 5"
+    test_write p2 {[1, 3:30, 32]} {\[1, 3:30, 32\]} "powerset write 6"
+    test_write p2 {[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31]} {\[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31\]} \
+	"powerset write 7"
+    test_write p2 {[]} {\[\]} "powerset write 8"
+
+# Fixme: this should be rejected by gnuchill
+#    test_write p3 {[-2147483648:2147483647]} {\[-2147483648:2147483647\]} \
+#	"powerset write 9"
+#    test_write p3 {[-2147483648, -1000000:1000000, 2147483647]} \
+#	{\[-2147483648, -1000000:1000000, 2147483647\]} \
+#	"powerset write 10"
+#    test_write p3 {[-99, -97, -95, 1001, 1003, 1005]} \
+#	{\[-99, -97, -95, 1001, 1003, 1005\]} "powerset write 11"
+#    test_write p3 {[]} {\[\]} "powerset write 12"
+    
+    # reference modes
+    test_write ref1 ->ref1 {H'[0-9a-fA-F]+} "reference write 1"
+    test_write ref2 ->b1 {H'[0-9a-fA-F]+} "reference write 2"
+    test_write ref1 NULL "reference write 3"
+    test_write ref2 NULL "reference write 4"
+
+    # procedure modes
+    test_write pr1 NULL "procefure write 1"
+    # FIXME: remove when NULL is understood
+    test_write pr1 0 NULL "procefure write 2"
+    test_write pr1 dummyfunc {H'[0-9a-fA-F]+ <dummyfunc>} "procedure write 3"
+
+    # timing modes, FIXME when callbacks to timefunctions are implemented
+    #test_write ti1 abstime(1970, 3, 12, 10, 43, 0) {} "time write 1"
+    #test_write ti2 <set somehow a duration>
+    xfail "timing modes not implemented yet"
+    
+    # real modes
+    # This ones 
+    test_write re1 42.03 {42.0[0-9]*} "real write 1"
+    test_write re1 0 "real write 2"
+    test_write re1 "1e+38" {1e\+38|1\.0[0-9]*e\+38|9\.9[0-9]*e\+37} \
+	"real write 3"
+    setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"
+    test_write re1 "1e+39" $infinity "real write 4"
+    test_write re2 42.03 {42.0[0-9]*} "real write 5"
+    test_write re2 0 "real write 6"
+    test_write re2 "1e+308" {1e\+308} "real write 7"
+    setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"
+    test_write re2 "1e+309" $infinity "real write 8"
+    # array modes
+    test_write arrl1 {[(1:3): [(1:2): -128]]} {\[\(1:3\): \[\(1:2\): -128\]\]}\
+	"array write 1"
+    test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
+	"array write 2"
+    test_write arrl1 {[(1): [(1:2): 127], (2): [(1:2): -128], (3): [(1:2): 127]]} {\[\(1\): \[\(1:2\): 127\], \(2\): \[\(1:2\): -128\], \(3\): \[\(1:2\): 127\]\]}\
+	"array write 3"
+     test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
+ 	"array write 4"
+     setup_xfail "*-*-*"
+     # Bogus test case - type mismatch?
+     test_write arrl1 {[(1): 127, (2): -128]} "array write 5"
+     test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\
+ 	"array write 6"
+
+    # structure modes
+    test_write strul1 {[.a: -32768, .b: 32767, .ch: "ZZZZ"]} \
+	{\[\.a: -32768, \.b: 32767, \.ch: \"ZZZZ\"\]} \
+	"structure write 1"
+    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
+	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
+	"structure write 2"
+    test_write strul1 -32768 {\[\.a: -32768, \.b: 0, \.ch: \"0000\"\]} \
+	{.a} "structure write 3"
+    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
+	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
+	"structure write 4"
+    test_write strul1 -32768 {\[\.a: 0, \.b: -32768, \.ch: \"0000\"\]} \
+	{.b} "structure write 5"
+    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \
+	{\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \
+	"structure write 6"
+    test_write strul1 \"HUGO\" {\[\.a: 0, \.b: 0, \.ch: \"HUGO\"\]} \
+	{.ch} "structure write 7"
+}
+
+# Start with a fresh gdb.
+
+set binfile "tests2.exe"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ".*"
+
+if [set_lang_chill] then {
+    write_access
+} else {
+    warning "$test_name tests suppressed."
+}
diff --git a/gdb/testsuite/gdb.chill/tuples.ch b/gdb/testsuite/gdb.chill/tuples.ch
new file mode 100644
index 0000000..24709f8
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tuples.ch
@@ -0,0 +1,86 @@
+x: MODULE
+
+SYNMODE m_arri = ARRAY(1:5) INT;
+DCL v_arri m_arri := [ -1, -2, -3, -4, -5 ];
+
+SYNMODE m_arrui = ARRAY(1:5) UINT;
+DCL v_arrui m_arrui := [ 1, 2, 3, 4, 5 ];
+
+SYNMODE r1 = RANGE (1:5);
+SYNMODE m_arrb = ARRAY(r1) BYTE;
+DCL v_arrb m_arrb := [ -3, -4, -5, -6, -7 ];
+
+SYNMODE m_arrub = ARRAY(r1) UBYTE;
+DCL v_arrub m_arrub := [ 3, 4, 5, 6, 7 ];
+
+SYNMODE m_arrc = ARRAY (1:5) CHAR;
+DCL v_arrc m_arrc := [ '1', '2', '3', '4', '5' ];
+
+SYNMODE m_ps = POWERSET r1;
+DCL v_ps m_ps := [ 1, 3, 5 ];
+
+DCL v_cv CHARS(20) VARYING := "foo";
+
+SYNMODE m_arrbool = ARRAY(r1) BOOL;
+DCL v_arrbool m_arrbool := [ true, false, true, false, true ];
+
+DCL j r1 := 4;
+
+DCL i INT;
+
+newmode vstruct = struct (a, b long, 
+			  case b of 
+			   (42): ch8 chars(20),
+			   (52): i long
+			   else  ch1 char
+                         esac);
+
+DCL vstr vstruct := [ .a: 10, .b: 52, .i: 100 ];
+
+i := 0;
+
+END x;
+
+setmode: MODULE /* This is from Cygnus PR chill/5024. */
+
+NEWMODE day = SET( monday, tuesday, wednesday, thursday, friday, saturday, sunday );
+NEWMODE dow = POWERSET day;
+
+DCL d day;
+DCL w dow;
+
+printdow: PROC( w dow );
+  DCL d day;
+  DO FOR d in w;
+    WRITETEXT( stdout, "%C ", d );
+  OD;
+END;
+
+d := monday;
+w := dow[monday : friday];
+printdow( w );
+
+printdow( dow[LOWER(dow) : UPPER(dow)] );
+
+END setmode;
+
+PR8643: MODULE
+
+SYNMODE m_set = SET (a, b, c, d);
+SYNMODE m_ps = POWERSET m_set;
+
+SYNMODE m_s1 = STRUCT (str CHARS(40) VARYING, i INT, ps m_ps);
+DCL vs1 m_s1;
+
+SYNMODE m_s2 = STRUCT (i LONG, s m_s1);
+DCL vs2 m_s2;
+
+SYNMODE m_arr = ARRAY (1:3) BYTE;
+SYNMODE m_s3 = STRUCT (i LONG, a m_arr);
+DCL vs3 m_s3;
+
+DCL i LONG;
+
+i := 24;
+
+END PR8643;
diff --git a/gdb/testsuite/gdb.chill/tuples.exp b/gdb/testsuite/gdb.chill/tuples.exp
new file mode 100644
index 0000000..fbfa9ed
--- /dev/null
+++ b/gdb/testsuite/gdb.chill/tuples.exp
@@ -0,0 +1,161 @@
+# Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Per Bothner. (bothner@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if [skip_chill_tests] then { continue }
+
+set testfile "tuples"
+set srcfile ${srcdir}/$subdir/${testfile}.ch
+set binfile ${objdir}/${subdir}/${testfile}.exe
+if  { [compile "${srcfile} -g -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {
+    perror "Couldn't compile ${srcfile}"
+    return -1
+}
+
+proc do_tests {} {
+    global prms_id bug_id subdir objdir srcdir binfile gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language chill" ""
+
+    runto tuples.ch:40
+
+    gdb_test_exact "print v_arri" {= [(1): -1, (2): -2, (3): -3, (4): -4, (5): -5]}
+    gdb_test_exact "set v_arri := \[ 33, 44, 55, 66, 77 \]" {}
+    gdb_test_exact "print v_arri" {= [(1): 33, (2): 44, (3): 55, (4): 66, (5): 77]} "after assignment 1 to v_arri"
+    gdb_test_exact "set v_arri := \[-33, -44, -55, -66, -77\]" {}
+    gdb_test_exact "print v_arri" {= [(1): -33, (2): -44, (3): -55, (4): -66, (5): -77]} {after assignment 2 to v_arri}
+
+    gdb_test_exact "print v_arrui" {= [(1): 1, (2): 2, (3): 3, (4): 4, (5): 5]}
+    gdb_test_exact "set v_arrui := \[ 11, 11, 11, 11, 11 \]" {}
+    gdb_test_exact "print v_arrui" {= [(1:5): 11]} "after assignment to v_arrui"
+
+    gdb_test_exact "print v_arrb" {= [(1): -3, (2): -4, (3): -5, (4): -6, (5): -7]}
+
+    gdb_test_exact "set v_arrb := \[ -9, -8, -7, -6, -5 \]" {}
+    gdb_test_exact "print v_arrb" {= [(1): -9, (2): -8, (3): -7, (4): -6, (5): -5]} "after assignment to v_arrb"
+
+    gdb_test_exact "print v_arrub" {= [(1): 3, (2): 4, (3): 5, (4): 6, (5): 7]}
+    gdb_test_exact "set v_arrub := \[ 77, 77, 77, 77, 77 \]" {}
+    gdb_test_exact "print v_arrub" {= [(1:5): 77]} "v_arrub after assignment"
+
+    gdb_test_exact "print j" {= 4}
+    gdb_test_exact "print j := 3+4" {= 7}
+    gdb_test_exact "print j := r1(3)" {= 3}
+
+    gdb_test_exact "print v_arrc" {= [(1): '1', (2): '2', (3): '3', (4): '4', (5): '5']}
+    gdb_test_exact "set v_arrc := \[ 'a', 'b', 'c', 'd', 'e' \]" {}
+    gdb_test_exact "print v_arrc" {= [(1): 'a', (2): 'b', (3): 'c', (4): 'd', (5): 'e']} "v_arrc after assignment"
+
+    gdb_test_exact "print v_ps" {= [1, 3, 5]}
+    gdb_test_exact "set v_ps := \[ 2, 4 \]" {}
+    gdb_test_exact "print v_ps" {= [2, 4]} {v_ps after assignment}
+    gdb_test_exact "print v_ps :=  \[\]" {= []} {assign [] to v_ps}
+
+    gdb_test_exact "print m_arri\[1, 2, 3, 4, 5\]" {= [(1): 1, (2): 2, (3): 3, (4): 4, (5): 5]}
+    gdb_test_exact "print m_arrub\[45, 46, 47, 48, 49\]" {= [(1): 45, (2): 46, (3): 47, (4): 48, (5): 49]}
+
+   gdb_test_exact "print v_cv" {= "foo"}
+   gdb_test_exact "set v_cv := \"foo-bar\"" {}
+   gdb_test_exact "print v_cv" {= "foo-bar"} "v_cv after assignment"
+   gdb_test_exact "set v_cv(3) := ' '" {}
+   gdb_test_exact "print v_cv" {= "foo bar"} "v_cv after element assignment"
+
+   gdb_test_exact "print v_arrbool" {= [(1): TRUE, (2): FALSE, (3): TRUE, (4): FALSE, (5): TRUE]}
+   gdb_test_exact "set v_arrbool := \[ false, false, false, false, false \]" {}
+   gdb_test_exact "print v_arrbool" {= [(1:5): FALSE]} "v_arrbool after assignment 1"
+   gdb_test_exact "set v_arrbool := \[true, true, true, true, true\]" {}
+   gdb_test_exact "print v_arrbool" {= [(1:5): TRUE]} "v_arrbool after assignment 2"
+   gdb_test_exact "set v_arrbool(3) := false" {}
+   gdb_test_exact "print v_arrbool" {= [(1:2): TRUE, (3): FALSE, (4:5): TRUE]} "v_arrbool after element assignment"
+
+   gdb_test_exact "set v_arrbool(1 up 2) := \[ false, true \]" {}
+   gdb_test_exact "print v_arrbool" {= [(1): FALSE, (2): TRUE, (3): FALSE, (4:5): TRUE]} "v_arrbool after slice assignment 1"
+   gdb_test_exact "set v_arrbool(3 : 5) := \[ true, true, false \]" {}
+   gdb_test_exact "print v_arrbool" {= [(1): FALSE, (2:4): TRUE, (5): FALSE]} "v_arrbool after slice assignment 2"
+
+   gdb_test_exact "set vstr := \[ .a: 2+3, .b: 12, .ch1: 'x' \]" {}
+   gdb_test_exact "print vstr.a" {= 5} "vstr.a after assignment"
+   gdb_test_exact "print vstr.ch1" {= 'x'} "vstr.ch1 after assignment"
+
+#   These tests are from Cygnus PR chill/5024:
+    gdb_test "break printdow" ""
+    gdb_test "continue" ""
+    gdb_test_exact "set var w:= dow\[monday\]" {}
+    gdb_test "print w" " = \\\[monday\\\]" \
+	"print bitstring after assignment"
+    gdb_test_exact "set var w:=\[\]" {}
+    gdb_test "print w" " = \\\[\\\]" \
+	"print bitstring after assignment of \[\]"
+
+#   These tests are from Cygnus PR chill/8643:
+    runto tuples.ch:40
+    gdb_test_exact "set var vs1 := \[ \"foo\", 41, \[ b \] \]"  {}
+    gdb_test_exact "print vs1" { = [.str: "foo", .i: 41, .ps: [b]]} \
+	"print vs1 after tuple assign 1"
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact "set var vs1 := \[ \"bar\", 42, m_ps\[ a \] \]" {}
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact "print vs1" { = [.str: "bar", .i: 42, .ps: [a]]} \
+	"print vs1 after tuple assign 2"
+
+    gdb_test_exact "set var \$i := m_s1\[\"foo\", 42, \[a \]\]" {}
+    gdb_test_exact {print $i} { = [.str: "foo", .i: 42, .ps: [a]]} \
+	"print \$i after tuple assign 1"
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact "set var \$i := m_s1\[\"foo\", 44, m_ps\[a \]\]" {}
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact {print $i} { = [.str: "foo", .i: 44, .ps: [a]]} \
+	"print \$i after tuple assign 2"
+
+    gdb_test_exact "set var vs2 := \[ 10, \[ \"foo\" , 42, \[ b \] \] \]" {}
+    gdb_test_exact "print vs2" \
+	{ = [.i: 10, .s: [.str: "foo", .i: 42, .ps: [b]]]} \
+	"print vs2 after tuple assign 1"
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact "set var vs2 := \[ 10+3, m_s1\[ \"foo\" , 42, m_ps\[ b \] \] \]" {}
+    setup_xfail "i*86-pc-linux*-gnu" "sparc-*-solaris*" "sparc-*-sunos*"
+    gdb_test_exact "print vs2" \
+	{ = [.i: 13, .s: [.str: "foo", .i: 42, .ps: [b]]]} \
+	"print vs2 after tuple assign 2"
+
+    gdb_test_exact "set var vs3 := \[ 33, \[ -1, -2, -3 \] \]" {}
+    gdb_test_exact "print vs3" {[.i: 33, .a: [(1): -1, (2): -2, (3): -3]]} \
+	"print vs3 after tuple assign"
+    gdb_test_exact "set var \$k := m_s3\[ 33, m_arr\[ 4, 3, 2 \] \]" {}
+    gdb_test_exact {print $k} { = [.i: 33, .a: [(1): 4, (2): 3, (3): 2]]} \
+	"print \$k after tuple assign"
+
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.disasm/Makefile.in b/gdb/testsuite/gdb.disasm/Makefile.in
new file mode 100644
index 0000000..ab228dd
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/Makefile.in
@@ -0,0 +1,20 @@
+#### host, target, and site specific Makefile frags come in here.
+
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+.PHONY: all clean mostlyclean distclean realclean
+
+all: 
+	@echo "Nothing to be done for all..."	
+
+clean mostlyclean:
+	-rm -f *.o *.diff *~ *.bad core sh3 hppa mn10200 mn10300
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
+
+
diff --git a/gdb/testsuite/gdb.disasm/configure b/gdb/testsuite/gdb.disasm/configure
new file mode 100644
index 0000000..0e6cbf2
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=sh3.s
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.disasm/configure.in b/gdb/testsuite/gdb.disasm/configure.in
new file mode 100644
index 0000000..508636f
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/configure.in
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(sh3.s)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.disasm/hppa.exp b/gdb/testsuite/gdb.disasm/hppa.exp
new file mode 100644
index 0000000..4c679a9
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/hppa.exp
@@ -0,0 +1,1403 @@
+
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cs.utah.edu)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if ![istarget "hppa*-*-*"] {
+    verbose "Tests ignored for all but hppa based targets."
+    return
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "hppa"
+set srcfile ${srcdir}/${subdir}/${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+set comp_output [gdb_compile "${srcfile}" "${binfile}" executable ""];
+if  { $comp_output != "" } {
+    if [ regexp "Opcode not defined - DIAG" $comp_output] {
+	warning "HP assembler in use--skipping disasm tests"
+	return
+    } else {
+	perror "Couldn't compile ${srcfile}"
+	return -1
+    }
+}
+
+proc all_integer_memory_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/8i integer_memory_tests\n"
+    gdb_expect {
+	-re "
+.*ldw 0\\(sr0,r4\\),r26.*
+.*ldh 0\\(sr0,r4\\),r26.*
+.*ldb 0\\(sr0,r4\\),r26.*
+.*stw r26,0\\(sr0,r4\\).*
+.*sth r26,0\\(sr0,r4\\).*
+.*stb r26,0\\(sr0,r4\\).*
+.*ldwm 0\\(sr0,r4\\),r26.*
+.*stwm r26,0\\(sr0,r4\\).*
+.*$gdb_prompt $" { pass "integer_memory_tests" }
+	-re "$gdb_prompt $" { fail "integer_memory_tests" }
+	timeout { fail "(timeout) integer memory_tests" }
+    }
+
+    send_gdb "x/20i integer_indexing_load\n"
+    gdb_expect {
+	-re "
+.*ldwx r5\\(sr0,r4\\),r26.*
+.*ldwx,s r5\\(sr0,r4\\),r26.*
+.*ldwx,m r5\\(sr0,r4\\),r26.*
+.*ldwx,sm r5\\(sr0,r4\\),r26.*
+.*ldhx r5\\(sr0,r4\\),r26.*
+.*ldhx,s r5\\(sr0,r4\\),r26.*
+.*ldhx,m r5\\(sr0,r4\\),r26.*
+.*ldhx,sm r5\\(sr0,r4\\),r26.*
+.*ldbx r5\\(sr0,r4\\),r26.*
+.*ldbx,s r5\\(sr0,r4\\),r26.*
+.*ldbx,m r5\\(sr0,r4\\),r26.*
+.*ldbx,sm r5\\(sr0,r4\\),r26.*
+.*ldwax r5\\(r4\\),r26.*
+.*ldwax,s r5\\(r4\\),r26.*
+.*ldwax,m r5\\(r4\\),r26.*
+.*ldwax,sm r5\\(r4\\),r26.*
+.*ldcwx r5\\(sr0,r4\\),r26.*
+.*ldcwx,s r5\\(sr0,r4\\),r26.*
+.*ldcwx,m r5\\(sr0,r4\\),r26.*
+.*ldcwx,sm r5\\(sr0,r4\\),r26.*
+.*$gdb_prompt $" { pass "integer_indexing_load" }
+	-re "$gdb_prompt $" { fail "integer_indexing_load" }
+	timeout { fail "(timeout) integer_indexing" }
+    }
+
+    send_gdb "x/15i integer_load_short_memory\n"
+    gdb_expect {
+	-re "
+.*ldws 0\\(sr0,r4\\),r26.*
+.*ldws,mb 0\\(sr0,r4\\),r26.*
+.*ldws,ma 0\\(sr0,r4\\),r26.*
+.*ldhs 0\\(sr0,r4\\),r26.*
+.*ldhs,mb 0\\(sr0,r4\\),r26.*
+.*ldhs,ma 0\\(sr0,r4\\),r26.*
+.*ldbs 0\\(sr0,r4\\),r26.*
+.*ldbs,mb 0\\(sr0,r4\\),r26.*
+.*ldbs,ma 0\\(sr0,r4\\),r26.*
+.*ldwas 0\\(r4\\),r26.*
+.*ldwas,mb 0\\(r4\\),r26.*
+.*ldwas,ma 0\\(r4\\),r26.*
+.*ldcws 0\\(sr0,r4\\),r26.*
+.*ldcws,mb 0\\(sr0,r4\\),r26.*
+.*ldcws,ma 0\\(sr0,r4\\),r26.*
+.*$gdb_prompt $" { pass "integer_load_short_memory" }
+	-re "$gdb_prompt $" { fail "integer_load_short_memory" }
+	timeout { fail "(timeout) integer_load_short_memory " }
+    }
+
+
+    send_gdb "x/17i integer_store_short_memory\n"
+    gdb_expect {
+	-re "
+.*stws r26,0\\(sr0,r4\\).*
+.*stws,mb r26,0\\(sr0,r4\\).*
+.*stws,ma r26,0\\(sr0,r4\\).*
+.*sths r26,0\\(sr0,r4\\).*
+.*sths,mb r26,0\\(sr0,r4\\).*
+.*sths,ma r26,0\\(sr0,r4\\).*
+.*stbs r26,0\\(sr0,r4\\).*
+.*stbs,mb r26,0\\(sr0,r4\\).*
+.*stbs,ma r26,0\\(sr0,r4\\).*
+.*stwas r26,0\\(r4\\).*
+.*stwas,mb r26,0\\(r4\\).*
+.*stwas,ma r26,0\\(r4\\).*
+.*stbys r26,0\\(sr0,r4\\).*
+.*stbys r26,0\\(sr0,r4\\).*
+.*stbys,e r26,0\\(sr0,r4\\).*
+.*stbys,b,m r26,0\\(sr0,r4\\).*
+.*stbys,e,m r26,0\\(sr0,r4\\).*
+.*$gdb_prompt $" { pass "integer_store_short_memory" }
+	-re "$gdb_prompt $" { fail "integer_store_short_memory" }
+	timeout { fail "(timeout) integer_short_memory " }
+    }
+}
+
+proc all_immediate_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/3i immediate_tests\n"
+    gdb_expect {
+	-re "
+.*ldo 5\\(r26\\),r26.*
+.*ldil -21524800,r26.*
+.*addil -21524800,r5.*
+.*$gdb_prompt $" { pass "immedate_tests" }
+	-re "$gdb_prompt $" { fail "immedate_tests" }
+	timeout { fail "(timeout) immedate_tests " }
+    }
+}
+
+proc all_branch_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/10i branch_tests_1\n"
+    gdb_expect {
+	-re "
+.*bl.*,rp.*
+.*bl,n.*,rp.*
+.*b.*
+.*b,n.*
+.*gate.*,rp.*
+.*gate,n.*,rp.*
+.*blr r4,rp.*
+.*blr,n r4,rp.*
+.*blr r4,r0.*
+.*blr,n r4,r0.*
+.*$gdb_prompt $" { pass "branch_tests_1" }
+	-re "$gdb_prompt $" { fail "branch_tests_1" }
+	timeout { fail "(timeout) branch_tests_1" }
+    }
+
+    send_gdb "x/6i branch_tests_2\n"
+    gdb_expect {
+	-re "
+.*bv r0\\(rp\\).*
+.*bv,n r0\\(rp\\).*
+.*be 1234\\(sr1,rp\\).*
+.*be,n 1234\\(sr1,rp\\).*
+.*ble 1234\\(sr1,rp\\).*
+.*ble,n 1234\\(sr1,rp\\).*
+.*$gdb_prompt $" { pass "branch_tests_2" }
+	-re "$gdb_prompt $" { fail "branch_tests_2" }
+	timeout { fail "(timeout) branch_tests_2" }
+    }
+
+
+    send_gdb "x/8i movb_tests\n"
+    gdb_expect {
+	-re "
+.*movb r4,r26,.* <movb_tests>.*
+.*movb,= r4,r26,.* <movb_tests>.*
+.*movb,< r4,r26,.* <movb_tests>.*
+.*movb,od r4,r26,.* <movb_tests>.*
+.*movb,tr r4,r26,.* <movb_tests>.*
+.*movb,<> r4,r26,.* <movb_tests>.*
+.*movb,>= r4,r26,.* <movb_tests>.*
+.*movb,ev r4,r26,.* <movb_tests>.*
+.*$gdb_prompt $" { pass "movb_tests" }
+	-re "$gdb_prompt $" { fail "movb_tests" }
+	timeout { fail "(timeout) movb_tests " }
+    }
+
+    send_gdb "x/8i movb_nullified_tests\n"
+    gdb_expect {
+	-re "
+.*movb,n.*r4,r26,.* <movb_tests>.*
+.*movb,=,n.*r4,r26,.* <movb_tests>.*
+.*movb,<,n.*r4,r26,.* <movb_tests>.*
+.*movb,od,n.*r4,r26,.* <movb_tests>.*
+.*movb,tr,n.*r4,r26,.* <movb_tests>.*
+.*movb,<>,n.*r4,r26,.* <movb_tests>.*
+.*movb,>=,n.*r4,r26,.* <movb_tests>.*
+.*movb,ev,n.*r4,r26,.* <movb_tests>.*
+.*$gdb_prompt $" { pass "movb_nullified_tests" }
+	-re "$gdb_prompt $" { fail "movb_nullified_tests" }
+	timeout { fail "(timeout) movb_nullified_tests " }
+    }
+
+    send_gdb "x/8i movib_tests\n"
+    gdb_expect {
+	-re "
+.*movib 5,r26,.* <movib_tests>.*
+.*movib,= 5,r26,.* <movib_tests>.*
+.*movib,< 5,r26,.* <movib_tests>.*
+.*movib,od 5,r26,.* <movib_tests>.*
+.*movib,tr 5,r26,.* <movib_tests>.*
+.*movib,<> 5,r26,.* <movib_tests>.*
+.*movib,>= 5,r26,.* <movib_tests>.*
+.*movib,ev 5,r26,.* <movib_tests>.*
+.*$gdb_prompt $" { pass "movib_tests" }
+	-re "$gdb_prompt $" { fail "movib_tests" }
+	timeout { fail "(timeout) movib_tests " }
+    }
+
+    send_gdb "x/8i movib_nullified_tests\n"
+    gdb_expect {
+	-re "
+.*movib,n.*5,r26,.* <movib_tests>.*
+.*movib,=,n.*5,r26,.* <movib_tests>.*
+.*movib,<,n.*5,r26,.* <movib_tests>.*
+.*movib,od,n.*5,r26,.* <movib_tests>.*
+.*movib,tr,n.*5,r26,.* <movib_tests>.*
+.*movib,<>,n.*5,r26,.* <movib_tests>.*
+.*movib,>=,n.*5,r26,.* <movib_tests>.*
+.*movib,ev,n.*5,r26,.* <movib_tests>.*
+.*$gdb_prompt $" { pass "movib_nullified_tests" }
+	-re "$gdb_prompt $" { fail "movib_nullified_tests" }
+	timeout { fail "(timeout) movib_nullified_tests " }
+    }
+
+    send_gdb "x/8i comb_tests_1\n"
+    gdb_expect {
+	-re "
+.*comb r0,r4,.* <comb_tests_1>.*
+.*comb,= r0,r4,.* <comb_tests_1>.*
+.*comb,< r0,r4,.* <comb_tests_1>.*
+.*comb,<= r0,r4,.* <comb_tests_1>.*
+.*comb,<< r0,r4,.* <comb_tests_1>.*
+.*comb,<<= r0,r4,.* <comb_tests_1>.*
+.*comb,sv r0,r4,.* <comb_tests_1>.*
+.*comb,od r0,r4,.* <comb_tests_1>.*
+.*$gdb_prompt $" { pass "comb_tests_1" }
+	-re "$gdb_prompt $" { fail "comb_tests_1" }
+	timeout { fail "(timeout) comb_tests_1" }
+    }
+
+    send_gdb "x/8i comb_tests_2\n"
+    gdb_expect {
+	-re "
+.*combf r0,r4,.* <comb_tests_2>.*
+.*combf,= r0,r4,.* <comb_tests_2>.*
+.*combf,< r0,r4,.* <comb_tests_2>.*
+.*combf,<= r0,r4,.* <comb_tests_2>.*
+.*combf,<< r0,r4,.* <comb_tests_2>.*
+.*combf,<<= r0,r4,.* <comb_tests_2>.*
+.*combf,sv r0,r4,.* <comb_tests_2>.*
+.*combf,od r0,r4,.* <comb_tests_2>.*
+.*$gdb_prompt $" { pass "comb_tests_2" }
+	-re "$gdb_prompt $" { fail "comb_tests_2" }
+	timeout { fail "(timeout) comb_tests_2" }
+    }
+
+    send_gdb "x/8i comb_nullified_tests_1\n"
+    gdb_expect {
+	-re "
+.*comb,n r0,r4,.* <comb_tests_1>.*
+.*comb,=,n r0,r4,.* <comb_tests_1>.*
+.*comb,<,n r0,r4,.* <comb_tests_1>.*
+.*comb,<=,n r0,r4,.* <comb_tests_1>.*
+.*comb,<<,n r0,r4,.* <comb_tests_1>.*
+.*comb,<<=,n r0,r4,.* <comb_tests_1>.*
+.*comb,sv,n r0,r4,.* <comb_tests_1>.*
+.*comb,od,n r0,r4,.* <comb_tests_1>.*
+.*$gdb_prompt $" { pass "comb_nullified_tests_1" }
+	-re "$gdb_prompt $" { fail "comb_nullified_tests_1" }
+	timeout { fail "(timeout) comb_nullified_tests_1" }
+    }
+
+    send_gdb "x/8i comb_nullified_tests_2\n"
+    gdb_expect {
+	-re "
+.*combf,n r0,r4,.* <comb_tests_2>.*
+.*combf,=,n r0,r4,.* <comb_tests_2>.*
+.*combf,<,n r0,r4,.* <comb_tests_2>.*
+.*combf,<=,n r0,r4,.* <comb_tests_2>.*
+.*combf,<<,n r0,r4,.* <comb_tests_2>.*
+.*combf,<<=,n r0,r4,.* <comb_tests_2>.*
+.*combf,sv,n r0,r4,.* <comb_tests_2>.*
+.*combf,od,n r0,r4,.* <comb_tests_2>.*
+.*$gdb_prompt $" { pass "comb_nullified_tests_2" }
+	-re "$gdb_prompt $" { fail "comb_nullified_tests_2" }
+	timeout { fail "(timeout) comb_nullified_tests_2" }
+    }
+
+    send_gdb "x/8i comib_tests_1\n"
+    gdb_expect {
+	-re "
+.*comib 0,r4,.* <comib_tests_1>.*
+.*comib,= 0,r4,.* <comib_tests_1>.*
+.*comib,< 0,r4,.* <comib_tests_1>.*
+.*comib,<= 0,r4,.* <comib_tests_1>.*
+.*comib,<< 0,r4,.* <comib_tests_1>.*
+.*comib,<<= 0,r4,.* <comib_tests_1>.*
+.*comib,sv 0,r4,.* <comib_tests_1>.*
+.*comib,od 0,r4,.* <comib_tests_1>.*
+.*$gdb_prompt $" { pass "comib_tests_1" }
+	-re "$gdb_prompt $" { fail "comib_tests_1" }
+	timeout { fail "(timeout) comib_tests_1" }
+    }
+
+    send_gdb "x/8i comib_tests_2\n"
+    gdb_expect {
+	-re "
+.*comibf 0,r4,.* <comib_tests_2>.*
+.*comibf,= 0,r4,.* <comib_tests_2>.*
+.*comibf,< 0,r4,.* <comib_tests_2>.*
+.*comibf,<= 0,r4,.* <comib_tests_2>.*
+.*comibf,<< 0,r4,.* <comib_tests_2>.*
+.*comibf,<<= 0,r4,.* <comib_tests_2>.*
+.*comibf,sv 0,r4,.* <comib_tests_2>.*
+.*comibf,od 0,r4,.* <comib_tests_2>.*
+.*$gdb_prompt $" { pass "comib_tests_2" }
+	-re "$gdb_prompt $" { fail "comib_tests_2" }
+	timeout { fail "(timeout) comib_tests_2" }
+    }
+
+    send_gdb "x/8i comib_nullified_tests_1\n"
+    gdb_expect {
+	-re "
+.*comib,n 0,r4,.* <comib_tests_1>.*
+.*comib,=,n 0,r4,.* <comib_tests_1>.*
+.*comib,<,n 0,r4,.* <comib_tests_1>.*
+.*comib,<=,n 0,r4,.* <comib_tests_1>.*
+.*comib,<<,n 0,r4,.* <comib_tests_1>.*
+.*comib,<<=,n 0,r4,.* <comib_tests_1>.*
+.*comib,sv,n 0,r4,.* <comib_tests_1>.*
+.*comib,od,n 0,r4,.* <comib_tests_1>.*
+.*$gdb_prompt $" { pass "comib_nullified_tests_1" }
+	-re "$gdb_prompt $" { fail "comib_nullified_tests_1" }
+	timeout { fail "(timeout) comib_nullified_tests_1" }
+    }
+
+    send_gdb "x/8i comib_nullified_tests_2\n"
+    gdb_expect {
+	-re "
+.*comibf,n 0,r4,.* <comib_tests_2>.*
+.*comibf,=,n 0,r4,.* <comib_tests_2>.*
+.*comibf,<,n 0,r4,.* <comib_tests_2>.*
+.*comibf,<=,n 0,r4,.* <comib_tests_2>.*
+.*comibf,<<,n 0,r4,.* <comib_tests_2>.*
+.*comibf,<<=,n 0,r4,.* <comib_tests_2>.*
+.*comibf,sv,n 0,r4,.* <comib_tests_2>.*
+.*comibf,od,n 0,r4,.* <comib_tests_2>.*
+.*$gdb_prompt $" { pass "comib_nullified_tests_2" }
+	-re "$gdb_prompt $" { fail "comib_nullified_tests_2" }
+	timeout { fail "(timeout) comib_nullified_tests_2" }
+    }
+
+    send_gdb "x/8i addb_tests_1\n"
+    gdb_expect {
+	-re "
+.*addb r1,r4,.* <addb_tests_1>.*
+.*addb,= r1,r4,.* <addb_tests_1>.*
+.*addb,< r1,r4,.* <addb_tests_1>.*
+.*addb,<= r1,r4,.* <addb_tests_1>.*
+.*addb,nuv r1,r4,.* <addb_tests_1>.*
+.*addb,znv r1,r4,.* <addb_tests_1>.*
+.*addb,sv r1,r4,.* <addb_tests_1>.*
+.*addb,od r1,r4,.* <addb_tests_1>.*
+.*$gdb_prompt $" { pass "addb_tests_1" }
+	-re "$gdb_prompt $" { fail "addb_tests_1" }
+	timeout { fail "(timeout) addb_tests_1" }
+    }
+
+    send_gdb "x/8i addb_tests_2\n"
+    gdb_expect {
+	-re "
+.*addbf r1,r4,.* <addb_tests_2>.*
+.*addbf,= r1,r4,.* <addb_tests_2>.*
+.*addbf,< r1,r4,.* <addb_tests_2>.*
+.*addbf,<= r1,r4,.* <addb_tests_2>.*
+.*addbf,nuv r1,r4,.* <addb_tests_2>.*
+.*addbf,znv r1,r4,.* <addb_tests_2>.*
+.*addbf,sv r1,r4,.* <addb_tests_2>.*
+.*addbf,od r1,r4,.* <addb_tests_2>.*
+.*$gdb_prompt $" { pass "addb_tests_2" }
+	-re "$gdb_prompt $" { fail "addb_tests_2" }
+	timeout { fail "(timeout) addb_tests_2" }
+    }
+
+    send_gdb "x/8i addb_nullified_tests_1\n"
+    gdb_expect {
+	-re "
+.*addb,n r1,r4,.* <addb_tests_1>.*
+.*addb,=,n r1,r4,.* <addb_tests_1>.*
+.*addb,<,n r1,r4,.* <addb_tests_1>.*
+.*addb,<=,n r1,r4,.* <addb_tests_1>.*
+.*addb,nuv,n r1,r4,.* <addb_tests_1>.*
+.*addb,znv,n r1,r4,.* <addb_tests_1>.*
+.*addb,sv,n r1,r4,.* <addb_tests_1>.*
+.*addb,od,n r1,r4,.* <addb_tests_1>.*
+.*$gdb_prompt $" { pass "addb_nullified_tests_1" }
+	-re "$gdb_prompt $" { fail "addb_nullified_tests_1" }
+	timeout { fail "(timeout) addb_nullified_tests_1" }
+    }
+
+    send_gdb "x/8i addb_nullified_tests_2\n"
+    gdb_expect {
+	-re "
+.*addbf,n r1,r4,.* <addb_tests_2>.*
+.*addbf,=,n r1,r4,.* <addb_tests_2>.*
+.*addbf,<,n r1,r4,.* <addb_tests_2>.*
+.*addbf,<=,n r1,r4,.* <addb_tests_2>.*
+.*addbf,nuv,n r1,r4,.* <addb_tests_2>.*
+.*addbf,znv,n r1,r4,.* <addb_tests_2>.*
+.*addbf,sv,n r1,r4,.* <addb_tests_2>.*
+.*addbf,od,n r1,r4,.* <addb_tests_2>.*
+.*$gdb_prompt $" { pass "addb_nullified_tests_2" }
+	-re "$gdb_prompt $" { fail "addb_nullified_tests_2" }
+	timeout { fail "(timeout) addb_nullified_tests_2" }
+    }
+
+    send_gdb "x/8i addib_tests_1\n"
+    gdb_expect {
+	-re "
+.*addib -1,r4,.* <addib_tests_1>.*
+.*addib,= -1,r4,.* <addib_tests_1>.*
+.*addib,< -1,r4,.* <addib_tests_1>.*
+.*addib,<= -1,r4,.* <addib_tests_1>.*
+.*addib,nuv -1,r4,.* <addib_tests_1>.*
+.*addib,znv -1,r4,.* <addib_tests_1>.*
+.*addib,sv -1,r4,.* <addib_tests_1>.*
+.*addib,od -1,r4,.* <addib_tests_1>.*
+.*$gdb_prompt $" { pass "addib_tests_1" }
+	-re "$gdb_prompt $" { fail "addib_tests_1" }
+	timeout { fail "(timeout) addib_tests_1" }
+    }
+
+    send_gdb "x/8i addib_tests_2\n"
+    gdb_expect {
+	-re "
+.*addibf -1,r4,.* <addib_tests_2>.*
+.*addibf,= -1,r4,.* <addib_tests_2>.*
+.*addibf,< -1,r4,.* <addib_tests_2>.*
+.*addibf,<= -1,r4,.* <addib_tests_2>.*
+.*addibf,nuv -1,r4,.* <addib_tests_2>.*
+.*addibf,znv -1,r4,.* <addib_tests_2>.*
+.*addibf,sv -1,r4,.* <addib_tests_2>.*
+.*addibf,od -1,r4,.* <addib_tests_2>.*
+.*$gdb_prompt $" { pass "addib_tests_2" }
+	-re "$gdb_prompt $" { fail "addib_tests_2" }
+	timeout { fail "(timeout) addib_tests_2" }
+    }
+
+    send_gdb "x/8i addib_nullified_tests_1\n"
+    gdb_expect {
+	-re "
+.*addib,n -1,r4,.* <addib_tests_1>.*
+.*addib,=,n -1,r4,.* <addib_tests_1>.*
+.*addib,<,n -1,r4,.* <addib_tests_1>.*
+.*addib,<=,n -1,r4,.* <addib_tests_1>.*
+.*addib,nuv,n -1,r4,.* <addib_tests_1>.*
+.*addib,znv,n -1,r4,.* <addib_tests_1>.*
+.*addib,sv,n -1,r4,.* <addib_tests_1>.*
+.*addib,od,n -1,r4,.* <addib_tests_1>.*
+.*$gdb_prompt $" { pass "addb_nullified_tests_1" }
+	-re "$gdb_prompt $" { fail "addb_nullified_tests_1" }
+	timeout { fail "(timeout) addb_nullified_tests_1" }
+    }
+
+    send_gdb "x/8i addib_nullified_tests_2\n"
+    gdb_expect {
+	-re "
+.*addibf,n -1,r4,.* <addib_tests_2>.*
+.*addibf,=,n -1,r4,.* <addib_tests_2>.*
+.*addibf,<,n -1,r4,.* <addib_tests_2>.*
+.*addibf,<=,n -1,r4,.* <addib_tests_2>.*
+.*addibf,nuv,n -1,r4,.* <addib_tests_2>.*
+.*addibf,znv,n -1,r4,.* <addib_tests_2>.*
+.*addibf,sv,n -1,r4,.* <addib_tests_2>.*
+.*addibf,od,n -1,r4,.* <addib_tests_2>.*
+.*$gdb_prompt $" { pass "addb_nullified_tests_2" }
+	-re "$gdb_prompt $" { fail "addb_nullified_tests_2" }
+	timeout { fail "(timeout) addb_nullified_tests_2" }
+    }
+
+    send_gdb "x/8i bb_tests\n"
+    gdb_expect {
+	-re "
+.*bvb,< r4,.* <bb_tests>.*
+.*bvb,>= r4,.* <bb_tests>.*
+.*bvb,<,n r4,.* <bb_tests>.*
+.*bvb,>=,n r4,.* <bb_tests>.*
+.*bb,< r4,5,.* <bb_tests>.*
+.*bb,>= r4,5,.* <bb_tests>.*
+.*bb,<,n r4,5,.* <bb_tests>.*
+.*bb,>=,n r4,5,.* <bb_tests>.*
+.*$gdb_prompt $" { pass "bb_tests" }
+	-re "$gdb_prompt $" { fail "bb_tests" }
+	timeout { fail "(timeout) bb_tests " }
+    }
+}
+
+proc all_integer_computational_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    set add_insns [list {add} {addl} {addo} {addc} {addco} \
+			{sh1add} {sh1addl} {sh1addo} \
+			{sh2add} {sh2addl} {sh2addo} \
+			{sh3add} {sh3addl} {sh3addo} ]
+
+    foreach i $add_insns {
+	send_gdb "x/16i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,r5,r6.*
+.*$i,= r4,r5,r6.*
+.*$i,< r4,r5,r6.*
+.*$i,<= r4,r5,r6.*
+.*$i,nuv r4,r5,r6.*
+.*$i,znv r4,r5,r6.*
+.*$i,sv r4,r5,r6.*
+.*$i,od r4,r5,r6.*
+.*$i,tr r4,r5,r6.*
+.*$i,<> r4,r5,r6.*
+.*$i,>= r4,r5,r6.*
+.*$i,> r4,r5,r6.*
+.*$i,uv r4,r5,r6.*
+.*$i,vnz r4,r5,r6.*
+.*$i,nsv r4,r5,r6.*
+.*$i,ev r4,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set sub_insns [list {sub} {subo} {subb} {subbo} {subt} {subto} \
+			{ds} {comclr} ]
+
+    foreach i $sub_insns {
+	send_gdb "x/16i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,r5,r6.*
+.*$i,= r4,r5,r6.*
+.*$i,< r4,r5,r6.*
+.*$i,<= r4,r5,r6.*
+.*$i,<< r4,r5,r6.*
+.*$i,<<= r4,r5,r6.*
+.*$i,sv r4,r5,r6.*
+.*$i,od r4,r5,r6.*
+.*$i,tr r4,r5,r6.*
+.*$i,<> r4,r5,r6.*
+.*$i,>= r4,r5,r6.*
+.*$i,> r4,r5,r6.*
+.*$i,>>= r4,r5,r6.*
+.*$i,>> r4,r5,r6.*
+.*$i,nsv r4,r5,r6.*
+.*$i,ev r4,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set logical_insns [list {or} {xor} {and} {andcm} ]
+
+    foreach i $logical_insns {
+	send_gdb "x/10i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,r5,r6.*
+.*$i,= r4,r5,r6.*
+.*$i,< r4,r5,r6.*
+.*$i,<= r4,r5,r6.*
+.*$i,od r4,r5,r6.*
+.*$i,tr r4,r5,r6.*
+.*$i,<> r4,r5,r6.*
+.*$i,>= r4,r5,r6.*
+.*$i,> r4,r5,r6.*
+.*$i,ev r4,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set unit_insns1 [list {uxor} {uaddcm} {uaddcmt} ]
+
+    foreach i $unit_insns1 {
+	send_gdb "x/12i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,r5,r6.*
+.*$i,sbz r4,r5,r6.*
+.*$i,shz r4,r5,r6.*
+.*$i,sdc r4,r5,r6.*
+.*$i,sbc r4,r5,r6.*
+.*$i,shc r4,r5,r6.*
+.*$i,tr r4,r5,r6.*
+.*$i,nbz r4,r5,r6.*
+.*$i,nhz r4,r5,r6.*
+.*$i,ndc r4,r5,r6.*
+.*$i,nbc r4,r5,r6.*
+.*$i,nhc r4,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set unit_insns2 [list {dcor} {idcor} ]
+
+    foreach i $unit_insns2 {
+	send_gdb "x/12i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,r5.*
+.*$i,sbz r4,r5.*
+.*$i,shz r4,r5.*
+.*$i,sdc r4,r5.*
+.*$i,sbc r4,r5.*
+.*$i,shc r4,r5.*
+.*$i,tr r4,r5.*
+.*$i,nbz r4,r5.*
+.*$i,nhz r4,r5.*
+.*$i,ndc r4,r5.*
+.*$i,nbc r4,r5.*
+.*$i,nhc r4,r5.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set addi_insns [list {addi} {addio} {addit} {addito} ]
+
+    foreach i $addi_insns {
+	send_gdb "x/16i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i 7b,r5,r6.*
+.*$i,= 7b,r5,r6.*
+.*$i,< 7b,r5,r6.*
+.*$i,<= 7b,r5,r6.*
+.*$i,nuv 7b,r5,r6.*
+.*$i,znv 7b,r5,r6.*
+.*$i,sv 7b,r5,r6.*
+.*$i,od 7b,r5,r6.*
+.*$i,tr 7b,r5,r6.*
+.*$i,<> 7b,r5,r6.*
+.*$i,>= 7b,r5,r6.*
+.*$i,> 7b,r5,r6.*
+.*$i,uv 7b,r5,r6.*
+.*$i,vnz 7b,r5,r6.*
+.*$i,nsv 7b,r5,r6.*
+.*$i,ev 7b,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set subi_insns [list {subi} {subio} {comiclr} ] 
+
+    foreach i $subi_insns {
+	send_gdb "x/16i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i 7b,r5,r6.*
+.*$i,= 7b,r5,r6.*
+.*$i,< 7b,r5,r6.*
+.*$i,<= 7b,r5,r6.*
+.*$i,<< 7b,r5,r6.*
+.*$i,<<= 7b,r5,r6.*
+.*$i,sv 7b,r5,r6.*
+.*$i,od 7b,r5,r6.*
+.*$i,tr 7b,r5,r6.*
+.*$i,<> 7b,r5,r6.*
+.*$i,>= 7b,r5,r6.*
+.*$i,> 7b,r5,r6.*
+.*$i,>>= 7b,r5,r6.*
+.*$i,>> 7b,r5,r6.*
+.*$i,nsv 7b,r5,r6.*
+.*$i,ev 7b,r5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    send_gdb "x/8i vshd_tests\n"
+    gdb_expect {
+	-re "
+.*vshd r4,r5,r6.*
+.*vshd,= r4,r5,r6.*
+.*vshd,< r4,r5,r6.*
+.*vshd,od r4,r5,r6.*
+.*vshd,tr r4,r5,r6.*
+.*vshd,<> r4,r5,r6.*
+.*vshd,>= r4,r5,r6.*
+.*vshd,ev r4,r5,r6.*
+.*$gdb_prompt $" { pass "vshd tests" }
+	    -re "$gdb_prompt $" { fail "vshd tests" }
+	    timeout { fail "(timeout) "vshd tests" }
+	}
+
+    send_gdb "x/8i shd_tests\n"
+    gdb_expect {
+	-re "
+.*shd r4,r5,5,r6.*
+.*shd,= r4,r5,5,r6.*
+.*shd,< r4,r5,5,r6.*
+.*shd,od r4,r5,5,r6.*
+.*shd,tr r4,r5,5,r6.*
+.*shd,<> r4,r5,5,r6.*
+.*shd,>= r4,r5,5,r6.*
+.*shd,ev r4,r5,5,r6.*
+.*$gdb_prompt $" { pass "shd tests" }
+	    -re "$gdb_prompt $" { fail "shd tests" }
+	    timeout { fail "(timeout) "shd tests" }
+	}
+
+    set extract_insns1 [list {extru} {extrs} {zdep} {dep} ] 
+
+    foreach i $extract_insns1 {
+	send_gdb "x/8i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,5,10,r6.*
+.*$i,= r4,5,10,r6.*
+.*$i,< r4,5,10,r6.*
+.*$i,od r4,5,10,r6.*
+.*$i,tr r4,5,10,r6.*
+.*$i,<> r4,5,10,r6.*
+.*$i,>= r4,5,10,r6.*
+.*$i,ev r4,5,10,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set extract_insns2 [list {vextru} {vextrs} {zvdep} {vdep} ] 
+
+    foreach i $extract_insns2 {
+	send_gdb "x/8i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i r4,5,r6.*
+.*$i,= r4,5,r6.*
+.*$i,< r4,5,r6.*
+.*$i,od r4,5,r6.*
+.*$i,tr r4,5,r6.*
+.*$i,<> r4,5,r6.*
+.*$i,>= r4,5,r6.*
+.*$i,ev r4,5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set extract_insns3 [list {vdepi} {zvdepi} ] 
+
+    foreach i $extract_insns3 {
+	send_gdb "x/8i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i -1,5,r6.*
+.*$i,= -1,5,r6.*
+.*$i,< -1,5,r6.*
+.*$i,od -1,5,r6.*
+.*$i,tr -1,5,r6.*
+.*$i,<> -1,5,r6.*
+.*$i,>= -1,5,r6.*
+.*$i,ev -1,5,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set extract_insns4 [list {depi} {zdepi} ] 
+
+    foreach i $extract_insns4 {
+	send_gdb "x/8i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i -1,4,10,r6.*
+.*$i,= -1,4,10,r6.*
+.*$i,< -1,4,10,r6.*
+.*$i,od -1,4,10,r6.*
+.*$i,tr -1,4,10,r6.*
+.*$i,<> -1,4,10,r6.*
+.*$i,>= -1,4,10,r6.*
+.*$i,ev -1,4,10,r6.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+}
+
+proc all_system_control_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/14i system_control_tests\n"
+    gdb_expect {
+	-re "
+.*break 5,c.*
+.*rfi.*
+.*rfir.*
+.*ssm 5,r4.*
+.*rsm 5,r4.*
+.*mtsm r4.*
+.*ldsid \\(sr0,r5\\),r4.*
+.*mtsp r4,sr0.*
+.*mtctl r4,ccr.*
+.*mfsp sr0,r4.*
+.*mfctl ccr,r4.*
+.*sync.*
+.*syncdma.*
+.*diag 4d2.*
+.*$gdb_prompt $" { pass "system_constrol_tests" }
+	-re "$gdb_prompt $" { fail "system_control_tests" }
+	timeout { file "(timeout) system_control_tests" }
+    }
+
+    send_gdb "x/4i probe_tests\n"
+    gdb_expect {
+	-re "
+.*prober \\(sr0,r5\\),r6,r7.*
+.*proberi \\(sr0,r5\\),1,r7.*
+.*probew \\(sr0,r5\\),r6,r7.*
+.*probewi \\(sr0,r5\\),1,r7.*
+.*$gdb_prompt $" { pass "probe_tests" }
+	-re "$gdb_prompt $" { fail "probe_tests" }
+	timeout { file "(timeout) probe_tests" }
+    }
+
+    # lci uses the same bit pattern as lha, so accept lha.
+    send_gdb "x/5i lpa_tests\n"
+    gdb_expect {
+	-re "
+.*lpa r4\\(sr0,r5\\),r6.*
+.*lpa,m r4\\(sr0,r5\\),r6.*
+.*lha r4\\(sr0,r5\\),r6.*
+.*lha,m r4\\(sr0,r5\\),r6.*
+.*lha r4\\(sr0,r5\\),r6.*
+.*$gdb_prompt $" { pass "lpa_tests" }
+	-re "$gdb_prompt $" { fail "lpa_tests" }
+	timeout { file "(timeout) lpa_tests" }
+    }
+
+    send_gdb "x/18i purge_tests\n"
+    gdb_expect {
+	-re "
+.*pdtlb r4\\(sr0,r5\\).*
+.*pdtlb,m r4\\(sr0,r5\\).*
+.*pitlb r4\\(sr0,r5\\).*
+.*pitlb,m r4\\(sr0,r5\\).*
+.*pdtlbe r4\\(sr0,r5\\).*
+.*pdtlbe,m r4\\(sr0,r5\\).*
+.*pitlbe r4\\(sr0,r5\\).*
+.*pitlbe,m r4\\(sr0,r5\\).*
+.*pdc r4\\(sr0,r5\\).*
+.*pdc,m r4\\(sr0,r5\\).*
+.*fdc r4\\(sr0,r5\\).*
+.*fdc,m r4\\(sr0,r5\\).*
+.*fic r4\\(sr0,r5\\).*
+.*fic,m r4\\(sr0,r5\\).*
+.*fdce r4\\(sr0,r5\\).*
+.*fdce,m r4\\(sr0,r5\\).*
+.*fice r4\\(sr0,r5\\).*
+.*fice,m r4\\(sr0,r5\\).*
+.*$gdb_prompt $" { pass "purge_tests" }
+	-re "$gdb_prompt $" { fail "purge_tests" }
+	timeout { file "(timeout) purge_tests" }
+    }
+
+    send_gdb "x/4i insert_tests\n"
+    gdb_expect {
+	-re "
+.*idtlba r4,\\(sr0,r5\\).*
+.*iitlba r4,\\(sr0,r5\\).*
+.*idtlbp r4,\\(sr0,r5\\).*
+.*iitlbp r4,\\(sr0,r5\\).*
+.*$gdb_prompt $" { pass "insert_tests" }
+	-re "$gdb_prompt $" { fail "insert_tests" }
+	timeout { file "(timeout) insert_tests" }
+    }
+
+}
+
+proc all_fpu_memory_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/20i fpu_memory_indexing_tests\n"
+    gdb_expect {
+	-re "
+.*fldwx r4\\(sr0,r5\\),fr6.*
+.*fldwx,s r4\\(sr0,r5\\),fr6.*
+.*fldwx,m r4\\(sr0,r5\\),fr6.*
+.*fldwx,sm r4\\(sr0,r5\\),fr6.*
+.*flddx r4\\(sr0,r5\\),fr6.*
+.*flddx,s r4\\(sr0,r5\\),fr6.*
+.*flddx,m r4\\(sr0,r5\\),fr6.*
+.*flddx,sm r4\\(sr0,r5\\),fr6.*
+.*fstwx fr6,r4\\(sr0,r5\\).*
+.*fstwx,s fr6,r4\\(sr0,r5\\).*
+.*fstwx,m fr6,r4\\(sr0,r5\\).*
+.*fstwx,sm fr6,r4\\(sr0,r5\\).*
+.*fstdx fr6,r4\\(sr0,r5\\).*
+.*fstdx,s fr6,r4\\(sr0,r5\\).*
+.*fstdx,m fr6,r4\\(sr0,r5\\).*
+.*fstdx,sm fr6,r4\\(sr0,r5\\).*
+.*fstqx fr6,r4\\(sr0,r5\\).*
+.*fstqx,s fr6,r4\\(sr0,r5\\).*
+.*fstqx,m fr6,r4\\(sr0,r5\\).*
+.*fstqx,sm fr6,r4\\(sr0,r5\\).*
+.*$gdb_prompt $" { pass "fpu_memory_indexing_tests" }
+	-re "$gdb_prompt $" { fail "fpu_memory_indexing_tests" }
+	timeout { file "(timeout) fpu_memory_indexing_tests" }
+    }
+
+    send_gdb "x/15i fpu_short_memory_tests\n"
+    gdb_expect {
+	-re "
+.*fldws 0\\(sr0,r5\\),fr6.*
+.*fldws,mb 0\\(sr0,r5\\),fr6.*
+.*fldws,ma 0\\(sr0,r5\\),fr6.*
+.*fldds 0\\(sr0,r5\\),fr6.*
+.*fldds,mb 0\\(sr0,r5\\),fr6.*
+.*fldds,ma 0\\(sr0,r5\\),fr6.*
+.*fstws fr6,0\\(sr0,r5\\).*
+.*fstws,mb fr6,0\\(sr0,r5\\).*
+.*fstws,ma fr6,0\\(sr0,r5\\).*
+.*fstds fr6,0\\(sr0,r5\\).*
+.*fstds,mb fr6,0\\(sr0,r5\\).*
+.*fstds,ma fr6,0\\(sr0,r5\\).*
+.*fstqs fr6,0\\(sr0,r5\\).*
+.*fstqs,mb fr6,0\\(sr0,r5\\).*
+.*fstqs,ma fr6,0\\(sr0,r5\\).*
+.*$gdb_prompt $" { pass "fpu_short_memory_tests" }
+	-re "$gdb_prompt $" { fail "fpu_short_memory_tests" }
+	timeout { file "(timeout) fpu_short_memory_tests" }
+    }
+
+}
+
+proc all_fpu_computational_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/1i fpu_misc_tests\n"
+    gdb_expect {
+	-re "
+.*ftest.*
+.*$gdb_prompt $" { pass "fpu_misc_tests" }
+	-re "$gdb_prompt $" { fail "fpu_misc_tests" }
+	timeout { file "(timeout) fpu_misc_tests" }
+    }
+
+    set fpu_two_op_insns [list {fcpy} {fabs} {fsqrt} {frnd} ]
+
+    foreach i $fpu_two_op_insns {
+	send_gdb "x/5i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i,sgl fr5,fr10.*
+.*$i,dbl fr5,fr10.*
+.*$i,quad fr5,fr10.*
+.*$i,sgl fr20,fr24.*
+.*$i,dbl fr20,fr24.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set fpu_conversions [list {fcnvff} {fcnvxf} {fcnvfx} {fcnvfxt} ]
+
+    foreach i $fpu_conversions {
+	send_gdb "x/18i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i,sgl,sgl fr5,fr10.*
+.*$i,sgl,dbl fr5,fr10.*
+.*$i,sgl,quad fr5,fr10.*
+.*$i,dbl,sgl fr5,fr10.*
+.*$i,dbl,dbl fr5,fr10.*
+.*$i,dbl,quad fr5,fr10.*
+.*$i,quad,sgl fr5,fr10.*
+.*$i,quad,dbl fr5,fr10.*
+.*$i,quad,quad fr5,fr10.*
+.*$i,sgl,sgl fr20,fr24.*
+.*$i,sgl,dbl fr20,fr24.*
+.*$i,sgl,quad fr20,fr24.*
+.*$i,dbl,sgl fr20,fr24.*
+.*$i,dbl,dbl fr20,fr24.*
+.*$i,dbl,quad fr20,fr24.*
+.*$i,quad,sgl fr20,fr24.*
+.*$i,quad,dbl fr20,fr24.*
+.*$i,quad,quad fr20,fr24.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    set fpu_three_op_insns [list {fadd} {fsub} {fmpy} {fdiv} {frem} ]
+
+    foreach i $fpu_three_op_insns {
+	send_gdb "x/6i $i"; send_gdb "_tests\n"
+	gdb_expect {
+	    -re "
+.*$i,sgl fr4,fr8,fr12.*
+.*$i,dbl fr4,fr8,fr12.*
+.*$i,quad fr4,fr8,fr12.*
+.*$i,sgl fr20,fr24,fr28.*
+.*$i,dbl fr20,fr24,fr28.*
+.*$i,quad fr20,fr24,fr28.*
+.*$gdb_prompt $" { pass "$i tests" }
+	    -re "$gdb_prompt $" { fail "$i tests" }
+	    timeout { fail "(timeout) $i tests" }
+	}
+    }
+
+    send_gdb "x/4i fmpy_addsub_tests\n"
+    gdb_expect {
+	-re "
+.*fmpyadd,sgl fr16,fr17,fr18,fr19,fr20.*
+.*fmpyadd,dbl fr16,fr17,fr18,fr19,fr20.*
+.*fmpysub,sgl fr16,fr17,fr18,fr19,fr20.*
+.*fmpysub,dbl fr16,fr17,fr18,fr19,fr20.*
+.*$gdb_prompt $" { pass "fmpy_addsub_tests" }
+	-re "$gdb_prompt $" { fail "fmpy_addsub_tests" }
+	timeout { fail "(timeout) fmpy_addsub_tests" }
+    }
+
+    send_gdb "x/i xmpyu_tests\n"
+    gdb_expect {
+	-re "
+.*xmpyu fr4,fr5,fr6.*
+.*$gdb_prompt $" {pass "xmpyu_tests" }
+	-re "$gdb_prompt $" {fail "xmpyu_tests" }
+	timeout { fail "(timeout) xmpyu_tests" }
+    }
+
+}
+
+proc all_fpu_comparison_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    set fpu_comparison_formats [list {sgl} {dbl} {quad} ]
+
+    foreach i $fpu_comparison_formats {
+	send_gdb "x/8i fcmp_$i"; send_gdb "_tests_1\n"
+	gdb_expect {
+	    -re "
+.*fcmp,$i,false\\? fr4,fr5.*
+.*fcmp,$i,false fr4,fr5.*
+.*fcmp,$i,\\? fr4,fr5.*
+.*fcmp,$i,!<=> fr4,fr5.*
+.*fcmp,$i,= fr4,fr5.*
+.*fcmp,$i,=t fr4,fr5.*
+.*fcmp,$i,\\?= fr4,fr5.*
+.*fcmp,$i,!<> fr4,fr5.*
+.*$gdb_prompt $" { pass "$i tests (part1) " }
+	    -re "$gdb_prompt $" { fail "fcmp_$i tests (part1) " }
+	    timeout { fail "(timeout) fcmp_$i tests (part1) " }
+	}
+
+	send_gdb "x/8i fcmp_$i"; send_gdb "_tests_2\n"
+	gdb_expect {
+	    -re "
+.*fcmp,$i,!\\?>= fr4,fr5.*
+.*fcmp,$i,< fr4,fr5.*
+.*fcmp,$i,\\?< fr4,fr5.*
+.*fcmp,$i,!>= fr4,fr5.*
+.*fcmp,$i,!\\?> fr4,fr5.*
+.*fcmp,$i,<= fr4,fr5.*
+.*fcmp,$i,\\?<= fr4,fr5.*
+.*fcmp,$i,!> fr4,fr5.*
+.*$gdb_prompt $" { pass "$i tests (part2) " }
+	    -re "$gdb_prompt $" { fail "fcmp_$i tests (part2) " }
+	    timeout { fail "(timeout) fcmp_$i tests (part2) " }
+	}
+
+	send_gdb "x/8i fcmp_$i"; send_gdb "_tests_3\n"
+	gdb_expect {
+	    -re "
+.*fcmp,$i,!\\?<= fr4,fr5.*
+.*fcmp,$i,> fr4,fr5.*
+.*fcmp,$i,\\?> fr4,fr5.*
+.*fcmp,$i,!<= fr4,fr5.*
+.*fcmp,$i,!\\?< fr4,fr5.*
+.*fcmp,$i,>= fr4,fr5.*
+.*fcmp,$i,\\?>= fr4,fr5.*
+.*fcmp,$i,!< fr4,fr5.*
+.*$gdb_prompt $" { pass "$i tests (part3) " }
+	    -re "$gdb_prompt $" { fail "fcmp_$i tests (part3) " }
+	    timeout { fail "(timeout) fcmp_$i tests (part3) " }
+	}
+
+	send_gdb "x/8i fcmp_$i"; send_gdb "_tests_4\n"
+	gdb_expect {
+	    -re "
+.*fcmp,$i,!\\?= fr4,fr5.*
+.*fcmp,$i,<> fr4,fr5.*
+.*fcmp,$i,!= fr4,fr5.*
+.*fcmp,$i,!=t fr4,fr5.*
+.*fcmp,$i,!\\? fr4,fr5.*
+.*fcmp,$i,<=> fr4,fr5.*
+.*fcmp,$i,true\\? fr4,fr5.*
+.*fcmp,$i,true fr4,fr5.*
+.*$gdb_prompt $" { pass "$i tests (part4) " }
+	    -re "$gdb_prompt $" { fail "fcmp_$i tests (part4) " }
+	    timeout { fail "(timeout) fcmp_$i tests (part4) " }
+	}
+    }
+}
+
+proc all_special_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4i special_tests\n"
+    gdb_expect {
+	-re "
+.*gfw r4\\(sr0,r5\\).*
+.*gfw,m r4\\(sr0,r5\\).*
+.*gfr r4\\(sr0,r5\\).*
+.*gfr,m r4\\(sr0,r5\\).*
+.*$gdb_prompt $" { pass "special tests" }
+	-re "$gdb_prompt $" { fail "special tests" }
+	timeout { fail "(timeout) special tests " }
+    }
+
+}
+
+proc all_sfu_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/16i sfu_tests\n"
+    gdb_expect {
+	-re "
+.*spop0,4,5.*
+.*spop0,4,73.*
+.*spop0,4,5,n.*
+.*spop0,4,73,n.*
+.*spop1,4,5 r5.*
+.*spop1,4,73 r5.*
+.*spop1,4,5,n r5.*
+.*spop1,4,73,n r5.*
+.*spop2,4,5 r5.*
+.*spop2,4,73 r5.*
+.*spop2,4,5,n r5.*
+.*spop2,4,73,n r5.*
+.*spop3,4,5 r5,r6.*
+.*spop3,4,73 r5,r6.*
+.*spop3,4,5,n r5,r6.*
+.*spop3,4,73,n r5,r6.*
+.*$gdb_prompt $" { pass "sfu tests" }
+	-re "$gdb_prompt $" { fail "sfu tests" }
+	timeout { fail "(timeout) sfu tests " }
+    }
+}
+
+proc all_copr_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4i copr_tests\n"
+    gdb_expect {
+	-re "
+.*copr,4,5.*
+.*copr,4,73.*
+.*copr,4,5,n.*
+.*copr,4,73,n.*
+.*$gdb_prompt $" { pass "copr tests" }
+	-re "$gdb_prompt $" { fail "copr tests" }
+	timeout { fail "(timeout) copr tests " }
+    }
+}
+
+proc all_copr_mem_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/8i copr_indexing_load\n"
+    gdb_expect {
+	-re "
+.*cldwx,4 r5\\(sr0,r4\\),r26.*
+.*cldwx,4,s r5\\(sr0,r4\\),r26.*
+.*cldwx,4,m r5\\(sr0,r4\\),r26.*
+.*cldwx,4,sm r5\\(sr0,r4\\),r26.*
+.*clddx,4 r5\\(sr0,r4\\),r26.*
+.*clddx,4,s r5\\(sr0,r4\\),r26.*
+.*clddx,4,m r5\\(sr0,r4\\),r26.*
+.*clddx,4,sm r5\\(sr0,r4\\),r26.*
+.*$gdb_prompt $" { pass "copr indexed load tests" }
+	-re "$gdb_prompt $" { fail "copr indexed load tests" }
+	timeout { fail "(timeout) copr indexed load tests " }
+    }
+
+    send_gdb "x/8i copr_indexing_store\n"
+    gdb_expect {
+	-re "
+.*cstwx,4 r26,r5\\(sr0,r4\\).*
+.*cstwx,4,s r26,r5\\(sr0,r4\\).*
+.*cstwx,4,m r26,r5\\(sr0,r4\\).*
+.*cstwx,4,sm r26,r5\\(sr0,r4\\).*
+.*cstdx,4 r26,r5\\(sr0,r4\\).*
+.*cstdx,4,s r26,r5\\(sr0,r4\\).*
+.*cstdx,4,m r26,r5\\(sr0,r4\\).*
+.*cstdx,4,sm r26,r5\\(sr0,r4\\).*
+.*$gdb_prompt $" { pass "copr indexed store tests" }
+	-re "$gdb_prompt $" { fail "copr indexed store tests" }
+	timeout { fail "(timeout) copr indexed load tests " }
+    }
+
+    send_gdb "x/12i copr_short_memory\n"
+    gdb_expect {
+	-re "
+.*cldws,4 0\\(sr0,r4\\),r26.*
+.*cldws,4,mb 0\\(sr0,r4\\),r26.*
+.*cldws,4,ma 0\\(sr0,r4\\),r26.*
+.*cldds,4 0\\(sr0,r4\\),r26.*
+.*cldds,4,mb 0\\(sr0,r4\\),r26.*
+.*cldds,4,ma 0\\(sr0,r4\\),r26.*
+.*cstws,4 r26,0\\(sr0,r4\\).*
+.*cstws,4,mb r26,0\\(sr0,r4\\).*
+.*cstws,4,ma r26,0\\(sr0,r4\\).*
+.*cstds,4 r26,0\\(sr0,r4\\).*
+.*cstds,4,mb r26,0\\(sr0,r4\\).*
+.*cstds,4,ma r26,0\\(sr0,r4\\).*
+.*$gdb_prompt $" { pass "copr short memory tests" }
+	-re "$gdb_prompt $" { fail "copr short memory tests" }
+	timeout { fail "(timeout) copr short memory tests " }
+    }
+}
+
+proc fmemLRbug_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12i fmemLRbug_tests_1\n"
+    gdb_expect {
+	-re "
+.*fstws fr6R,0\\(sr0,r26\\).*
+.*fstws fr6,4\\(sr0,r26\\).*
+.*fstws fr6,8\\(sr0,r26\\).*
+.*fstds fr6,0\\(sr0,r26\\).*
+.*fstds fr6,4\\(sr0,r26\\).*
+.*fstds fr6,8\\(sr0,r26\\).*
+.*fldws 0\\(sr0,r26\\),fr6R.*
+.*fldws 4\\(sr0,r26\\),fr6.*
+.*fldws 8\\(sr0,r26\\),fr6.*
+.*fldds 0\\(sr0,r26\\),fr6.*
+.*fldds 4\\(sr0,r26\\),fr6.*
+.*fldds 8\\(sr0,r26\\),fr6.*
+.*$gdb_prompt $" { pass "fmem LR register selector tests (part1)" }
+	-re "$gdb_prompt $" { fail "fmem LR register selector tests (part1)" }
+	timeout { fail "(timeout) fmem LR register selector tests  (part1)" }
+    }
+
+    send_gdb "x/12i fmemLRbug_tests_2\n"
+    gdb_expect {
+	-re "
+.*fstws fr6R,0\\(sr0,r26\\).*
+.*fstws fr6,4\\(sr0,r26\\).*
+.*fstws fr6,8\\(sr0,r26\\).*
+.*fstds fr6,0\\(sr0,r26\\).*
+.*fstds fr6,4\\(sr0,r26\\).*
+.*fstds fr6,8\\(sr0,r26\\).*
+.*fldws 0\\(sr0,r26\\),fr6R.*
+.*fldws 4\\(sr0,r26\\),fr6.*
+.*fldws 8\\(sr0,r26\\),fr6.*
+.*fldds 0\\(sr0,r26\\),fr6.*
+.*fldds 4\\(sr0,r26\\),fr6.*
+.*fldds 8\\(sr0,r26\\),fr6.*
+.*$gdb_prompt $" { pass "fmem LR register selector tests (part2)" }
+	-re "$gdb_prompt $" { fail "fmem LR register selector tests (part2)" }
+	timeout { fail "(timeout) fmem LR register selector tests  (part2)" }
+    }
+
+    send_gdb "x/12i fmemLRbug_tests_3\n"
+    gdb_expect {
+	-re "
+.*fstwx fr6R,r25\\(sr0,r26\\).*
+.*fstwx fr6,r25\\(sr0,r26\\).*
+.*fstwx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fldwx r25\\(sr0,r26\\),fr6R.*
+.*fldwx r25\\(sr0,r26\\),fr6.*
+.*fldwx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*$gdb_prompt $" { pass "fmem LR register selector tests (part3)" }
+	-re "$gdb_prompt $" { fail "fmem LR register selector tests (part3)" }
+	timeout { fail "(timeout) fmem LR register selector tests  (part3)" }
+    }
+
+    send_gdb "x/12i fmemLRbug_tests_4\n"
+    gdb_expect {
+	-re "
+.*fstwx fr6R,r25\\(sr0,r26\\).*
+.*fstwx fr6,r25\\(sr0,r26\\).*
+.*fstwx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fstdx fr6,r25\\(sr0,r26\\).*
+.*fldwx r25\\(sr0,r26\\),fr6R.*
+.*fldwx r25\\(sr0,r26\\),fr6.*
+.*fldwx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*flddx r25\\(sr0,r26\\),fr6.*
+.*$gdb_prompt $" { pass "fmem LR register selector tests (part4)" }
+	-re "$gdb_prompt $" { fail "fmem LR register selector tests (part4)" }
+	timeout { fail "(timeout) fmem LR register selector tests  (part4)" }
+    }
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+all_integer_memory_tests
+all_immediate_tests
+all_branch_tests
+all_integer_computational_tests
+all_system_control_tests
+all_fpu_memory_tests
+all_fpu_computational_tests
+all_fpu_comparison_tests
+all_special_tests
+all_sfu_tests
+all_copr_tests
+all_copr_mem_tests
+
+# Regression test for a bug Tege found.
+fmemLRbug_tests
diff --git a/gdb/testsuite/gdb.disasm/hppa.s b/gdb/testsuite/gdb.disasm/hppa.s
new file mode 100644
index 0000000..593d8bf
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/hppa.s
@@ -0,0 +1,1738 @@
+	.SPACE $PRIVATE$
+	.SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31
+	.SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82
+	.SPACE $TEXT$
+	.SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44
+	.SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY
+	.IMPORT $global$,DATA
+	.IMPORT $$dyncall,MILLICODE
+; gcc_compiled.:
+	.SPACE $TEXT$
+	.SUBSPA $CODE$
+
+	.align 4
+	.EXPORT integer_memory_tests,CODE
+	.EXPORT integer_indexing_load,CODE
+	.EXPORT integer_load_short_memory,CODE
+	.EXPORT integer_store_short_memory,CODE
+	.EXPORT immediate_tests,CODE
+	.EXPORT branch_tests_1,CODE
+	.EXPORT branch_tests_2,CODE
+	.EXPORT movb_tests,CODE
+	.EXPORT movb_nullified_tests,CODE
+	.EXPORT movib_tests,CODE
+	.EXPORT movib_nullified_tests,CODE
+	.EXPORT comb_tests_1,CODE
+	.EXPORT comb_tests_2,CODE
+	.EXPORT comb_nullified_tests_1,CODE
+	.EXPORT comb_nullified_tests_2,CODE
+	.EXPORT comib_tests_1,CODE
+	.EXPORT comib_tests_2,CODE
+	.EXPORT comib_nullified_tests_1,CODE
+	.EXPORT comib_nullified_tests_2,CODE
+	.EXPORT addb_tests_1,CODE
+	.EXPORT addb_tests_2,CODE
+	.EXPORT addb_nullified_tests_1,CODE
+	.EXPORT addb_nullified_tests_2,CODE
+	.EXPORT addib_tests_1,CODE
+	.EXPORT addib_tests_2,CODE
+	.EXPORT addib_nullified_tests_1,CODE
+	.EXPORT addib_nullified_tests_2,CODE
+	.EXPORT bb_tests,CODE
+	.EXPORT add_tests,CODE
+	.EXPORT addl_tests,CODE
+	.EXPORT addo_tests,CODE
+	.EXPORT addc_tests,CODE
+	.EXPORT addco_tests,CODE
+	.EXPORT sh1add_tests,CODE
+	.EXPORT sh1addl_tests,CODE
+	.EXPORT sh1addo_tests,CODE
+	.EXPORT sh2add_tests,CODE
+	.EXPORT sh2addl_tests,CODE
+	.EXPORT sh2addo_tests,CODE
+	.EXPORT sh3add_tests,CODE
+	.EXPORT sh3addl_tests,CODE
+	.EXPORT sh3addo_tests,CODE
+	.EXPORT sub_tests,CODE
+	.EXPORT subo_tests,CODE
+	.EXPORT subb_tests,CODE
+	.EXPORT subbo_tests,CODE
+	.EXPORT subt_tests,CODE
+	.EXPORT subto_tests,CODE
+	.EXPORT ds_tests,CODE
+	.EXPORT comclr_tests,CODE
+	.EXPORT or_tests,CODE
+	.EXPORT xor_tests,CODE
+	.EXPORT and_tests,CODE
+	.EXPORT andcm_tests,CODE
+	.EXPORT uxor_tests,CODE
+	.EXPORT uaddcm_tests,CODE
+	.EXPORT uaddcmt_tests,CODE
+	.EXPORT dcor_tests,CODE
+	.EXPORT idcor_tests,CODE
+	.EXPORT addi_tests,CODE
+	.EXPORT addio_tests,CODE
+	.EXPORT addit_tests,CODE
+	.EXPORT addito_tests,CODE
+	.EXPORT subi_tests,CODE
+	.EXPORT subio_tests,CODE
+	.EXPORT comiclr_tests,CODE
+	.EXPORT vshd_tests,CODE
+	.EXPORT shd_tests,CODE
+	.EXPORT extru_tests,CODE
+	.EXPORT extrs_tests,CODE
+	.EXPORT zdep_tests,CODE
+	.EXPORT dep_tests,CODE
+	.EXPORT vextru_tests,CODE
+	.EXPORT vextrs_tests,CODE
+	.EXPORT zvdep_tests,CODE
+	.EXPORT vdep_tests,CODE
+	.EXPORT vdepi_tests,CODE
+	.EXPORT zvdepi_tests,CODE
+	.EXPORT depi_tests,CODE
+	.EXPORT zdepi_tests,CODE
+	.EXPORT system_control_tests,CODE
+	.EXPORT probe_tests,CODE
+	.EXPORT lpa_tests,CODE
+	.EXPORT purge_tests,CODE
+	.EXPORT insert_tests,CODE
+	.EXPORT fpu_misc_tests,CODE
+	.EXPORT fpu_memory_indexing_tests,CODE
+	.EXPORT fpu_short_memory_tests,CODE
+	.EXPORT fcpy_tests,CODE
+	.EXPORT fabs_tests,CODE
+	.EXPORT fsqrt_tests,CODE
+	.EXPORT frnd_tests,CODE
+	.EXPORT fcnvff_tests,CODE
+	.EXPORT fcnvxf_tests,CODE
+	.EXPORT fcnvfx_tests,CODE
+	.EXPORT fcnvfxt_tests,CODE
+	.EXPORT fadd_tests,CODE
+	.EXPORT fsub_tests,CODE
+	.EXPORT fmpy_tests,CODE
+	.EXPORT fdiv_tests,CODE
+	.EXPORT frem_tests,CODE
+	.EXPORT fcmp_sgl_tests_1,CODE
+	.EXPORT fcmp_sgl_tests_2,CODE
+	.EXPORT fcmp_sgl_tests_3,CODE
+	.EXPORT fcmp_sgl_tests_4,CODE
+	.EXPORT fcmp_dbl_tests_1,CODE
+	.EXPORT fcmp_dbl_tests_2,CODE
+	.EXPORT fcmp_dbl_tests_3,CODE
+	.EXPORT fcmp_dbl_tests_4,CODE
+	.EXPORT fcmp_quad_tests_1,CODE
+	.EXPORT fcmp_quad_tests_2,CODE
+	.EXPORT fcmp_quad_tests_3,CODE
+	.EXPORT fcmp_quad_tests_4,CODE
+	.EXPORT fmpy_addsub_tests,CODE
+	.EXPORT xmpyu_tests,CODE
+	.EXPORT special_tests,CODE
+	.EXPORT sfu_tests,CODE
+	.EXPORT copr_tests,CODE
+	.EXPORT copr_indexing_load,CODE
+	.EXPORT copr_indexing_store,CODE
+	.EXPORT copr_short_memory,CODE
+	.EXPORT fmemLRbug_tests_1,CODE
+	.EXPORT fmemLRbug_tests_2,CODE
+	.EXPORT fmemLRbug_tests_3,CODE
+	.EXPORT fmemLRbug_tests_4,CODE
+	.EXPORT main,CODE
+	.EXPORT main,ENTRY,PRIV_LEV=3,RTNVAL=GR
+main
+	.PROC
+	.CALLINFO FRAME=64,NO_CALLS,SAVE_SP
+	.ENTRY
+	copy %r4,%r1
+	copy %r30,%r4
+	stwm %r1,64(0,%r30)
+; First memory reference instructions.
+; Should try corner cases for each field extraction.
+; Should deal with s == 0 case somehow?!?
+integer_memory_tests
+	ldw 0(0,%r4),%r26
+	ldh 0(0,%r4),%r26
+	ldb 0(0,%r4),%r26
+	stw %r26,0(0,%r4)
+	sth %r26,0(0,%r4)
+	stb %r26,0(0,%r4)
+
+; Should make sure pre/post modes are recognized correctly.
+	ldwm 0(0,%r4),%r26
+	stwm %r26,0(0,%r4)
+
+integer_indexing_load
+	ldwx %r5(0,%r4),%r26
+	ldwx,s %r5(0,%r4),%r26
+	ldwx,m %r5(0,%r4),%r26
+	ldwx,sm %r5(0,%r4),%r26
+	ldhx %r5(0,%r4),%r26
+	ldhx,s %r5(0,%r4),%r26
+	ldhx,m %r5(0,%r4),%r26
+	ldhx,sm %r5(0,%r4),%r26
+	ldbx %r5(0,%r4),%r26
+	ldbx,s %r5(0,%r4),%r26
+	ldbx,m %r5(0,%r4),%r26
+	ldbx,sm %r5(0,%r4),%r26
+	ldwax %r5(%r4),%r26
+	ldwax,s %r5(%r4),%r26
+	ldwax,m %r5(%r4),%r26
+	ldwax,sm %r5(%r4),%r26
+	ldcwx %r5(0,%r4),%r26
+	ldcwx,s %r5(0,%r4),%r26
+	ldcwx,m %r5(0,%r4),%r26
+	ldcwx,sm %r5(0,%r4),%r26
+
+integer_load_short_memory
+	ldws 0(0,%r4),%r26
+	ldws,mb 0(0,%r4),%r26
+	ldws,ma 0(0,%r4),%r26
+	ldhs 0(0,%r4),%r26
+	ldhs,mb 0(0,%r4),%r26
+	ldhs,ma 0(0,%r4),%r26
+	ldbs 0(0,%r4),%r26
+	ldbs,mb 0(0,%r4),%r26
+	ldbs,ma 0(0,%r4),%r26
+	ldwas 0(%r4),%r26
+	ldwas,mb 0(%r4),%r26
+	ldwas,ma 0(%r4),%r26
+	ldcws 0(0,%r4),%r26
+	ldcws,mb 0(0,%r4),%r26
+	ldcws,ma 0(0,%r4),%r26
+
+integer_store_short_memory
+	stws %r26,0(0,%r4)
+	stws,mb %r26,0(0,%r4)
+	stws,ma %r26,0(0,%r4)
+	sths %r26,0(0,%r4)
+	sths,mb %r26,0(0,%r4)
+	sths,ma %r26,0(0,%r4)
+	stbs %r26,0(0,%r4)
+	stbs,mb %r26,0(0,%r4)
+	stbs,ma %r26,0(0,%r4)
+	stwas %r26,0(%r4)
+	stwas,mb %r26,0(%r4)
+	stwas,ma %r26,0(%r4)
+	stbys %r26,0(0,%r4)
+	stbys,b %r26,0(0,%r4)
+	stbys,e %r26,0(0,%r4)
+	stbys,b,m %r26,0(0,%r4)
+	stbys,e,m %r26,0(0,%r4)
+
+; Immediate instructions.
+immediate_tests
+	ldo 5(%r26),%r26
+	ldil L%0xdeadbeef,%r26
+	addil L%0xdeadbeef,%r5
+
+; Lots of branch instructions.
+; blr with %r0 as return pointer should really be just br <target>,
+; but the assemblers can't handle it.
+branch_tests_1
+	bl main,%r2
+	bl,n main,%r2
+	b main
+	b,n main
+	gate main,%r2
+	gate,n main,%r2
+	blr %r4,%r2
+	blr,n %r4,%r2
+	blr %r4,%r0
+	blr,n %r4,%r0
+branch_tests_2
+	bv 0(%r2)
+	bv,n 0(%r2)
+	be 0x1234(%sr1,%r2)
+	be,n 0x1234(%sr1,%r2)
+	ble 0x1234(%sr1,%r2)
+	ble,n 0x1234(%sr1,%r2)
+
+; GAS can't assemble movb,n or movib,n.
+movb_tests
+	movb %r4,%r26,movb_tests
+	movb,= %r4,%r26,movb_tests
+	movb,< %r4,%r26,movb_tests
+	movb,od %r4,%r26,movb_tests
+	movb,tr %r4,%r26,movb_tests
+	movb,<> %r4,%r26,movb_tests
+	movb,>= %r4,%r26,movb_tests
+	movb,ev %r4,%r26,movb_tests
+movb_nullified_tests
+	movb,n %r4,%r26,movb_tests
+	movb,=,n %r4,%r26,movb_tests
+	movb,<,n %r4,%r26,movb_tests
+	movb,od,n %r4,%r26,movb_tests
+	movb,tr,n %r4,%r26,movb_tests
+	movb,<>,n %r4,%r26,movb_tests
+	movb,>=,n %r4,%r26,movb_tests
+	movb,ev,n %r4,%r26,movb_tests
+
+movib_tests
+	movib 5,%r26,movib_tests
+	movib,= 5,%r26,movib_tests
+	movib,< 5,%r26,movib_tests
+	movib,od 5,%r26,movib_tests
+	movib,tr 5,%r26,movib_tests
+	movib,<> 5,%r26,movib_tests
+	movib,>= 5,%r26,movib_tests
+	movib,ev 5,%r26,movib_tests
+movib_nullified_tests
+	movib,n 5,%r26,movib_tests
+	movib,=,n 5,%r26,movib_tests
+	movib,<,n 5,%r26,movib_tests
+	movib,od,n 5,%r26,movib_tests
+	movib,tr,n 5,%r26,movib_tests
+	movib,<>,n 5,%r26,movib_tests
+	movib,>=,n 5,%r26,movib_tests
+	movib,ev,n 5,%r26,movib_tests
+
+comb_tests_1
+	comb %r0,%r4,comb_tests_1
+	comb,= %r0,%r4,comb_tests_1
+	comb,< %r0,%r4,comb_tests_1
+	comb,<= %r0,%r4,comb_tests_1
+	comb,<< %r0,%r4,comb_tests_1
+	comb,<<= %r0,%r4,comb_tests_1
+	comb,sv %r0,%r4,comb_tests_1
+	comb,od %r0,%r4,comb_tests_1
+
+comb_tests_2
+	comb,tr %r0,%r4,comb_tests_2
+	comb,<> %r0,%r4,comb_tests_2
+	comb,>= %r0,%r4,comb_tests_2
+	comb,> %r0,%r4,comb_tests_2
+	comb,>>= %r0,%r4,comb_tests_2
+	comb,>> %r0,%r4,comb_tests_2
+	comb,nsv %r0,%r4,comb_tests_2
+	comb,ev %r0,%r4,comb_tests_2
+
+comb_nullified_tests_1
+	comb,n %r0,%r4,comb_tests_1
+	comb,=,n %r0,%r4,comb_tests_1
+	comb,<,n %r0,%r4,comb_tests_1
+	comb,<=,n %r0,%r4,comb_tests_1
+	comb,<<,n %r0,%r4,comb_tests_1
+	comb,<<=,n %r0,%r4,comb_tests_1
+	comb,sv,n %r0,%r4,comb_tests_1
+	comb,od,n %r0,%r4,comb_tests_1
+
+comb_nullified_tests_2
+	comb,tr,n %r0,%r4,comb_tests_2
+	comb,<>,n %r0,%r4,comb_tests_2
+	comb,>=,n %r0,%r4,comb_tests_2
+	comb,>,n %r0,%r4,comb_tests_2
+	comb,>>=,n %r0,%r4,comb_tests_2
+	comb,>>,n %r0,%r4,comb_tests_2
+	comb,nsv,n %r0,%r4,comb_tests_2
+	comb,ev,n %r0,%r4,comb_tests_2
+
+comib_tests_1
+	comib 0,%r4,comib_tests_1
+	comib,= 0,%r4,comib_tests_1
+	comib,< 0,%r4,comib_tests_1
+	comib,<= 0,%r4,comib_tests_1
+	comib,<< 0,%r4,comib_tests_1
+	comib,<<= 0,%r4,comib_tests_1
+	comib,sv 0,%r4,comib_tests_1
+	comib,od 0,%r4,comib_tests_1
+
+comib_tests_2
+	comib,tr 0,%r4,comib_tests_2
+	comib,<> 0,%r4,comib_tests_2
+	comib,>= 0,%r4,comib_tests_2
+	comib,> 0,%r4,comib_tests_2
+	comib,>>= 0,%r4,comib_tests_2
+	comib,>> 0,%r4,comib_tests_2
+	comib,nsv 0,%r4,comib_tests_2
+	comib,ev 0,%r4,comib_tests_2
+
+comib_nullified_tests_1
+	comib,n 0,%r4,comib_tests_1
+	comib,=,n 0,%r4,comib_tests_1
+	comib,<,n 0,%r4,comib_tests_1
+	comib,<=,n 0,%r4,comib_tests_1
+	comib,<<,n 0,%r4,comib_tests_1
+	comib,<<=,n 0,%r4,comib_tests_1
+	comib,sv,n 0,%r4,comib_tests_1
+	comib,od,n 0,%r4,comib_tests_1
+
+comib_nullified_tests_2
+	comib,tr,n 0,%r4,comib_tests_2
+	comib,<>,n 0,%r4,comib_tests_2
+	comib,>=,n 0,%r4,comib_tests_2
+	comib,>,n 0,%r4,comib_tests_2
+	comib,>>=,n 0,%r4,comib_tests_2
+	comib,>>,n 0,%r4,comib_tests_2
+	comib,nsv,n 0,%r4,comib_tests_2
+	comib,ev,n 0,%r4,comib_tests_2
+
+addb_tests_1
+	addb %r1,%r4,addb_tests_1
+	addb,= %r1,%r4,addb_tests_1
+	addb,< %r1,%r4,addb_tests_1
+	addb,<= %r1,%r4,addb_tests_1
+	addb,nuv %r1,%r4,addb_tests_1
+	addb,znv %r1,%r4,addb_tests_1
+	addb,sv %r1,%r4,addb_tests_1
+	addb,od %r1,%r4,addb_tests_1
+
+addb_tests_2
+	addb,tr %r1,%r4,addb_tests_2
+	addb,<> %r1,%r4,addb_tests_2
+	addb,>= %r1,%r4,addb_tests_2
+	addb,> %r1,%r4,addb_tests_2
+	addb,uv %r1,%r4,addb_tests_2
+	addb,vnz %r1,%r4,addb_tests_2
+	addb,nsv %r1,%r4,addb_tests_2
+	addb,ev %r1,%r4,addb_tests_2
+
+addb_nullified_tests_1
+	addb,n %r1,%r4,addb_tests_1
+	addb,=,n %r1,%r4,addb_tests_1
+	addb,<,n %r1,%r4,addb_tests_1
+	addb,<=,n %r1,%r4,addb_tests_1
+	addb,nuv,n %r1,%r4,addb_tests_1
+	addb,znv,n %r1,%r4,addb_tests_1
+	addb,sv,n %r1,%r4,addb_tests_1
+	addb,od,n %r1,%r4,addb_tests_1
+
+addb_nullified_tests_2
+	addb,tr,n %r1,%r4,addb_tests_2
+	addb,<>,n %r1,%r4,addb_tests_2
+	addb,>=,n %r1,%r4,addb_tests_2
+	addb,>,n %r1,%r4,addb_tests_2
+	addb,uv,n %r1,%r4,addb_tests_2
+	addb,vnz,n %r1,%r4,addb_tests_2
+	addb,nsv,n %r1,%r4,addb_tests_2
+	addb,ev,n %r1,%r4,addb_tests_2
+
+addib_tests_1
+	addib -1,%r4,addib_tests_1
+	addib,= -1,%r4,addib_tests_1
+	addib,< -1,%r4,addib_tests_1
+	addib,<= -1,%r4,addib_tests_1
+	addib,nuv -1,%r4,addib_tests_1
+	addib,znv -1,%r4,addib_tests_1
+	addib,sv -1,%r4,addib_tests_1
+	addib,od -1,%r4,addib_tests_1
+
+addib_tests_2
+	addib,tr -1,%r4,addib_tests_2
+	addib,<> -1,%r4,addib_tests_2
+	addib,>= -1,%r4,addib_tests_2
+	addib,> -1,%r4,addib_tests_2
+	addib,uv -1,%r4,addib_tests_2
+	addib,vnz -1,%r4,addib_tests_2
+	addib,nsv -1,%r4,addib_tests_2
+	addib,ev -1,%r4,addib_tests_2
+
+addib_nullified_tests_1
+	addib,n -1,%r4,addib_tests_1
+	addib,=,n -1,%r4,addib_tests_1
+	addib,<,n -1,%r4,addib_tests_1
+	addib,<=,n -1,%r4,addib_tests_1
+	addib,nuv,n -1,%r4,addib_tests_1
+	addib,znv,n -1,%r4,addib_tests_1
+	addib,sv,n -1,%r4,addib_tests_1
+	addib,od,n -1,%r4,addib_tests_1
+
+addib_nullified_tests_2
+	addib,tr,n -1,%r4,addib_tests_2
+	addib,<>,n -1,%r4,addib_tests_2
+	addib,>=,n -1,%r4,addib_tests_2
+	addib,>,n -1,%r4,addib_tests_2
+	addib,uv,n -1,%r4,addib_tests_2
+	addib,vnz,n -1,%r4,addib_tests_2
+	addib,nsv,n -1,%r4,addib_tests_2
+	addib,ev,n -1,%r4,addib_tests_2
+
+
+; Needs to check lots of stuff (like corner bit cases)
+bb_tests
+	bvb,< %r4,bb_tests
+	bvb,>= %r4,bb_tests
+	bvb,<,n %r4,bb_tests
+	bvb,>=,n %r4,bb_tests
+	bb,< %r4,5,bb_tests
+	bb,>= %r4,5,bb_tests
+	bb,<,n %r4,5,bb_tests
+	bb,>=,n %r4,5,bb_tests
+	
+; Computational instructions
+add_tests
+	add  %r4,%r5,%r6
+	add,=  %r4,%r5,%r6
+	add,<  %r4,%r5,%r6
+	add,<=  %r4,%r5,%r6
+	add,nuv  %r4,%r5,%r6
+	add,znv  %r4,%r5,%r6
+	add,sv  %r4,%r5,%r6
+	add,od  %r4,%r5,%r6
+	add,tr  %r4,%r5,%r6
+	add,<>  %r4,%r5,%r6
+	add,>=  %r4,%r5,%r6
+	add,>  %r4,%r5,%r6
+	add,uv  %r4,%r5,%r6
+	add,vnz  %r4,%r5,%r6
+	add,nsv  %r4,%r5,%r6
+	add,ev  %r4,%r5,%r6
+
+addl_tests
+	addl  %r4,%r5,%r6
+	addl,=  %r4,%r5,%r6
+	addl,<  %r4,%r5,%r6
+	addl,<=  %r4,%r5,%r6
+	addl,nuv  %r4,%r5,%r6
+	addl,znv  %r4,%r5,%r6
+	addl,sv  %r4,%r5,%r6
+	addl,od  %r4,%r5,%r6
+	addl,tr  %r4,%r5,%r6
+	addl,<>  %r4,%r5,%r6
+	addl,>=  %r4,%r5,%r6
+	addl,>  %r4,%r5,%r6
+	addl,uv  %r4,%r5,%r6
+	addl,vnz  %r4,%r5,%r6
+	addl,nsv  %r4,%r5,%r6
+	addl,ev  %r4,%r5,%r6
+
+addo_tests
+	addo  %r4,%r5,%r6
+	addo,=  %r4,%r5,%r6
+	addo,<  %r4,%r5,%r6
+	addo,<=  %r4,%r5,%r6
+	addo,nuv  %r4,%r5,%r6
+	addo,znv  %r4,%r5,%r6
+	addo,sv  %r4,%r5,%r6
+	addo,od  %r4,%r5,%r6
+	addo,tr  %r4,%r5,%r6
+	addo,<>  %r4,%r5,%r6
+	addo,>=  %r4,%r5,%r6
+	addo,>  %r4,%r5,%r6
+	addo,uv  %r4,%r5,%r6
+	addo,vnz  %r4,%r5,%r6
+	addo,nsv  %r4,%r5,%r6
+	addo,ev  %r4,%r5,%r6
+
+addc_tests
+	addc  %r4,%r5,%r6
+	addc,=  %r4,%r5,%r6
+	addc,<  %r4,%r5,%r6
+	addc,<=  %r4,%r5,%r6
+	addc,nuv  %r4,%r5,%r6
+	addc,znv  %r4,%r5,%r6
+	addc,sv  %r4,%r5,%r6
+	addc,od  %r4,%r5,%r6
+	addc,tr  %r4,%r5,%r6
+	addc,<>  %r4,%r5,%r6
+	addc,>=  %r4,%r5,%r6
+	addc,>  %r4,%r5,%r6
+	addc,uv  %r4,%r5,%r6
+	addc,vnz  %r4,%r5,%r6
+	addc,nsv  %r4,%r5,%r6
+	addc,ev  %r4,%r5,%r6
+
+addco_tests
+	addco  %r4,%r5,%r6
+	addco,=  %r4,%r5,%r6
+	addco,<  %r4,%r5,%r6
+	addco,<=  %r4,%r5,%r6
+	addco,nuv  %r4,%r5,%r6
+	addco,znv  %r4,%r5,%r6
+	addco,sv  %r4,%r5,%r6
+	addco,od  %r4,%r5,%r6
+	addco,tr  %r4,%r5,%r6
+	addco,<>  %r4,%r5,%r6
+	addco,>=  %r4,%r5,%r6
+	addco,>  %r4,%r5,%r6
+	addco,uv  %r4,%r5,%r6
+	addco,vnz  %r4,%r5,%r6
+	addco,nsv  %r4,%r5,%r6
+	addco,ev  %r4,%r5,%r6
+
+sh1add_tests
+	sh1add  %r4,%r5,%r6
+	sh1add,=  %r4,%r5,%r6
+	sh1add,<  %r4,%r5,%r6
+	sh1add,<=  %r4,%r5,%r6
+	sh1add,nuv  %r4,%r5,%r6
+	sh1add,znv  %r4,%r5,%r6
+	sh1add,sv  %r4,%r5,%r6
+	sh1add,od  %r4,%r5,%r6
+	sh1add,tr  %r4,%r5,%r6
+	sh1add,<>  %r4,%r5,%r6
+	sh1add,>=  %r4,%r5,%r6
+	sh1add,>  %r4,%r5,%r6
+	sh1add,uv  %r4,%r5,%r6
+	sh1add,vnz  %r4,%r5,%r6
+	sh1add,nsv  %r4,%r5,%r6
+	sh1add,ev  %r4,%r5,%r6
+
+sh1addl_tests
+	sh1addl  %r4,%r5,%r6
+	sh1addl,=  %r4,%r5,%r6
+	sh1addl,<  %r4,%r5,%r6
+	sh1addl,<=  %r4,%r5,%r6
+	sh1addl,nuv  %r4,%r5,%r6
+	sh1addl,znv  %r4,%r5,%r6
+	sh1addl,sv  %r4,%r5,%r6
+	sh1addl,od  %r4,%r5,%r6
+	sh1addl,tr  %r4,%r5,%r6
+	sh1addl,<>  %r4,%r5,%r6
+	sh1addl,>=  %r4,%r5,%r6
+	sh1addl,>  %r4,%r5,%r6
+	sh1addl,uv  %r4,%r5,%r6
+	sh1addl,vnz  %r4,%r5,%r6
+	sh1addl,nsv  %r4,%r5,%r6
+	sh1addl,ev  %r4,%r5,%r6
+
+sh1addo_tests
+	sh1addo  %r4,%r5,%r6
+	sh1addo,=  %r4,%r5,%r6
+	sh1addo,<  %r4,%r5,%r6
+	sh1addo,<=  %r4,%r5,%r6
+	sh1addo,nuv  %r4,%r5,%r6
+	sh1addo,znv  %r4,%r5,%r6
+	sh1addo,sv  %r4,%r5,%r6
+	sh1addo,od  %r4,%r5,%r6
+	sh1addo,tr  %r4,%r5,%r6
+	sh1addo,<>  %r4,%r5,%r6
+	sh1addo,>=  %r4,%r5,%r6
+	sh1addo,>  %r4,%r5,%r6
+	sh1addo,uv  %r4,%r5,%r6
+	sh1addo,vnz  %r4,%r5,%r6
+	sh1addo,nsv  %r4,%r5,%r6
+	sh1addo,ev  %r4,%r5,%r6
+
+
+sh2add_tests
+	sh2add  %r4,%r5,%r6
+	sh2add,=  %r4,%r5,%r6
+	sh2add,<  %r4,%r5,%r6
+	sh2add,<=  %r4,%r5,%r6
+	sh2add,nuv  %r4,%r5,%r6
+	sh2add,znv  %r4,%r5,%r6
+	sh2add,sv  %r4,%r5,%r6
+	sh2add,od  %r4,%r5,%r6
+	sh2add,tr  %r4,%r5,%r6
+	sh2add,<>  %r4,%r5,%r6
+	sh2add,>=  %r4,%r5,%r6
+	sh2add,>  %r4,%r5,%r6
+	sh2add,uv  %r4,%r5,%r6
+	sh2add,vnz  %r4,%r5,%r6
+	sh2add,nsv  %r4,%r5,%r6
+	sh2add,ev  %r4,%r5,%r6
+
+sh2addl_tests
+	sh2addl  %r4,%r5,%r6
+	sh2addl,=  %r4,%r5,%r6
+	sh2addl,<  %r4,%r5,%r6
+	sh2addl,<=  %r4,%r5,%r6
+	sh2addl,nuv  %r4,%r5,%r6
+	sh2addl,znv  %r4,%r5,%r6
+	sh2addl,sv  %r4,%r5,%r6
+	sh2addl,od  %r4,%r5,%r6
+	sh2addl,tr  %r4,%r5,%r6
+	sh2addl,<>  %r4,%r5,%r6
+	sh2addl,>=  %r4,%r5,%r6
+	sh2addl,>  %r4,%r5,%r6
+	sh2addl,uv  %r4,%r5,%r6
+	sh2addl,vnz  %r4,%r5,%r6
+	sh2addl,nsv  %r4,%r5,%r6
+	sh2addl,ev  %r4,%r5,%r6
+
+sh2addo_tests
+	sh2addo  %r4,%r5,%r6
+	sh2addo,=  %r4,%r5,%r6
+	sh2addo,<  %r4,%r5,%r6
+	sh2addo,<=  %r4,%r5,%r6
+	sh2addo,nuv  %r4,%r5,%r6
+	sh2addo,znv  %r4,%r5,%r6
+	sh2addo,sv  %r4,%r5,%r6
+	sh2addo,od  %r4,%r5,%r6
+	sh2addo,tr  %r4,%r5,%r6
+	sh2addo,<>  %r4,%r5,%r6
+	sh2addo,>=  %r4,%r5,%r6
+	sh2addo,>  %r4,%r5,%r6
+	sh2addo,uv  %r4,%r5,%r6
+	sh2addo,vnz  %r4,%r5,%r6
+	sh2addo,nsv  %r4,%r5,%r6
+	sh2addo,ev  %r4,%r5,%r6
+
+
+sh3add_tests
+	sh3add  %r4,%r5,%r6
+	sh3add,=  %r4,%r5,%r6
+	sh3add,<  %r4,%r5,%r6
+	sh3add,<=  %r4,%r5,%r6
+	sh3add,nuv  %r4,%r5,%r6
+	sh3add,znv  %r4,%r5,%r6
+	sh3add,sv  %r4,%r5,%r6
+	sh3add,od  %r4,%r5,%r6
+	sh3add,tr  %r4,%r5,%r6
+	sh3add,<>  %r4,%r5,%r6
+	sh3add,>=  %r4,%r5,%r6
+	sh3add,>  %r4,%r5,%r6
+	sh3add,uv  %r4,%r5,%r6
+	sh3add,vnz  %r4,%r5,%r6
+	sh3add,nsv  %r4,%r5,%r6
+	sh3add,ev  %r4,%r5,%r6
+
+sh3addl_tests
+	sh3addl  %r4,%r5,%r6
+	sh3addl,=  %r4,%r5,%r6
+	sh3addl,<  %r4,%r5,%r6
+	sh3addl,<=  %r4,%r5,%r6
+	sh3addl,nuv  %r4,%r5,%r6
+	sh3addl,znv  %r4,%r5,%r6
+	sh3addl,sv  %r4,%r5,%r6
+	sh3addl,od  %r4,%r5,%r6
+	sh3addl,tr  %r4,%r5,%r6
+	sh3addl,<>  %r4,%r5,%r6
+	sh3addl,>=  %r4,%r5,%r6
+	sh3addl,>  %r4,%r5,%r6
+	sh3addl,uv  %r4,%r5,%r6
+	sh3addl,vnz  %r4,%r5,%r6
+	sh3addl,nsv  %r4,%r5,%r6
+	sh3addl,ev  %r4,%r5,%r6
+
+sh3addo_tests
+	sh3addo  %r4,%r5,%r6
+	sh3addo,=  %r4,%r5,%r6
+	sh3addo,<  %r4,%r5,%r6
+	sh3addo,<=  %r4,%r5,%r6
+	sh3addo,nuv  %r4,%r5,%r6
+	sh3addo,znv  %r4,%r5,%r6
+	sh3addo,sv  %r4,%r5,%r6
+	sh3addo,od  %r4,%r5,%r6
+	sh3addo,tr  %r4,%r5,%r6
+	sh3addo,<>  %r4,%r5,%r6
+	sh3addo,>=  %r4,%r5,%r6
+	sh3addo,>  %r4,%r5,%r6
+	sh3addo,uv  %r4,%r5,%r6
+	sh3addo,vnz  %r4,%r5,%r6
+	sh3addo,nsv  %r4,%r5,%r6
+	sh3addo,ev  %r4,%r5,%r6
+
+
+sub_tests
+	sub %r4,%r5,%r6
+	sub,= %r4,%r5,%r6
+	sub,< %r4,%r5,%r6
+	sub,<= %r4,%r5,%r6
+	sub,<< %r4,%r5,%r6
+	sub,<<= %r4,%r5,%r6
+	sub,sv %r4,%r5,%r6
+	sub,od %r4,%r5,%r6
+	sub,tr %r4,%r5,%r6
+	sub,<> %r4,%r5,%r6
+	sub,>= %r4,%r5,%r6
+	sub,> %r4,%r5,%r6
+	sub,>>= %r4,%r5,%r6
+	sub,>> %r4,%r5,%r6
+	sub,nsv %r4,%r5,%r6
+	sub,ev %r4,%r5,%r6
+
+subo_tests
+	subo %r4,%r5,%r6
+	subo,= %r4,%r5,%r6
+	subo,< %r4,%r5,%r6
+	subo,<= %r4,%r5,%r6
+	subo,<< %r4,%r5,%r6
+	subo,<<= %r4,%r5,%r6
+	subo,sv %r4,%r5,%r6
+	subo,od %r4,%r5,%r6
+	subo,tr %r4,%r5,%r6
+	subo,<> %r4,%r5,%r6
+	subo,>= %r4,%r5,%r6
+	subo,> %r4,%r5,%r6
+	subo,>>= %r4,%r5,%r6
+	subo,>> %r4,%r5,%r6
+	subo,nsv %r4,%r5,%r6
+	subo,ev %r4,%r5,%r6
+
+subb_tests
+	subb %r4,%r5,%r6
+	subb,= %r4,%r5,%r6
+	subb,< %r4,%r5,%r6
+	subb,<= %r4,%r5,%r6
+	subb,<< %r4,%r5,%r6
+	subb,<<= %r4,%r5,%r6
+	subb,sv %r4,%r5,%r6
+	subb,od %r4,%r5,%r6
+	subb,tr %r4,%r5,%r6
+	subb,<> %r4,%r5,%r6
+	subb,>= %r4,%r5,%r6
+	subb,> %r4,%r5,%r6
+	subb,>>= %r4,%r5,%r6
+	subb,>> %r4,%r5,%r6
+	subb,nsv %r4,%r5,%r6
+	subb,ev %r4,%r5,%r6
+
+subbo_tests
+	subbo %r4,%r5,%r6
+	subbo,= %r4,%r5,%r6
+	subbo,< %r4,%r5,%r6
+	subbo,<= %r4,%r5,%r6
+	subbo,<< %r4,%r5,%r6
+	subbo,<<= %r4,%r5,%r6
+	subbo,sv %r4,%r5,%r6
+	subbo,od %r4,%r5,%r6
+	subbo,tr %r4,%r5,%r6
+	subbo,<> %r4,%r5,%r6
+	subbo,>= %r4,%r5,%r6
+	subbo,> %r4,%r5,%r6
+	subbo,>>= %r4,%r5,%r6
+	subbo,>> %r4,%r5,%r6
+	subbo,nsv %r4,%r5,%r6
+	subbo,ev %r4,%r5,%r6
+
+subt_tests
+	subt %r4,%r5,%r6
+	subt,= %r4,%r5,%r6
+	subt,< %r4,%r5,%r6
+	subt,<= %r4,%r5,%r6
+	subt,<< %r4,%r5,%r6
+	subt,<<= %r4,%r5,%r6
+	subt,sv %r4,%r5,%r6
+	subt,od %r4,%r5,%r6
+	subt,tr %r4,%r5,%r6
+	subt,<> %r4,%r5,%r6
+	subt,>= %r4,%r5,%r6
+	subt,> %r4,%r5,%r6
+	subt,>>= %r4,%r5,%r6
+	subt,>> %r4,%r5,%r6
+	subt,nsv %r4,%r5,%r6
+	subt,ev %r4,%r5,%r6
+
+subto_tests
+	subto %r4,%r5,%r6
+	subto,= %r4,%r5,%r6
+	subto,< %r4,%r5,%r6
+	subto,<= %r4,%r5,%r6
+	subto,<< %r4,%r5,%r6
+	subto,<<= %r4,%r5,%r6
+	subto,sv %r4,%r5,%r6
+	subto,od %r4,%r5,%r6
+	subto,tr %r4,%r5,%r6
+	subto,<> %r4,%r5,%r6
+	subto,>= %r4,%r5,%r6
+	subto,> %r4,%r5,%r6
+	subto,>>= %r4,%r5,%r6
+	subto,>> %r4,%r5,%r6
+	subto,nsv %r4,%r5,%r6
+	subto,ev %r4,%r5,%r6
+
+ds_tests
+	ds %r4,%r5,%r6
+	ds,= %r4,%r5,%r6
+	ds,< %r4,%r5,%r6
+	ds,<= %r4,%r5,%r6
+	ds,<< %r4,%r5,%r6
+	ds,<<= %r4,%r5,%r6
+	ds,sv %r4,%r5,%r6
+	ds,od %r4,%r5,%r6
+	ds,tr %r4,%r5,%r6
+	ds,<> %r4,%r5,%r6
+	ds,>= %r4,%r5,%r6
+	ds,> %r4,%r5,%r6
+	ds,>>= %r4,%r5,%r6
+	ds,>> %r4,%r5,%r6
+	ds,nsv %r4,%r5,%r6
+	ds,ev %r4,%r5,%r6
+
+comclr_tests
+	comclr %r4,%r5,%r6
+	comclr,= %r4,%r5,%r6
+	comclr,< %r4,%r5,%r6
+	comclr,<= %r4,%r5,%r6
+	comclr,<< %r4,%r5,%r6
+	comclr,<<= %r4,%r5,%r6
+	comclr,sv %r4,%r5,%r6
+	comclr,od %r4,%r5,%r6
+	comclr,tr %r4,%r5,%r6
+	comclr,<> %r4,%r5,%r6
+	comclr,>= %r4,%r5,%r6
+	comclr,> %r4,%r5,%r6
+	comclr,>>= %r4,%r5,%r6
+	comclr,>> %r4,%r5,%r6
+	comclr,nsv %r4,%r5,%r6
+	comclr,ev %r4,%r5,%r6
+
+or_tests
+	or %r4,%r5,%r6
+	or,= %r4,%r5,%r6
+	or,< %r4,%r5,%r6
+	or,<= %r4,%r5,%r6
+	or,od %r4,%r5,%r6
+	or,tr %r4,%r5,%r6
+	or,<> %r4,%r5,%r6
+	or,>= %r4,%r5,%r6
+	or,> %r4,%r5,%r6
+	or,ev %r4,%r5,%r6
+xor_tests
+	xor %r4,%r5,%r6
+	xor,= %r4,%r5,%r6
+	xor,< %r4,%r5,%r6
+	xor,<= %r4,%r5,%r6
+	xor,od %r4,%r5,%r6
+	xor,tr %r4,%r5,%r6
+	xor,<> %r4,%r5,%r6
+	xor,>= %r4,%r5,%r6
+	xor,> %r4,%r5,%r6
+	xor,ev %r4,%r5,%r6
+
+and_tests
+	and %r4,%r5,%r6
+	and,= %r4,%r5,%r6
+	and,< %r4,%r5,%r6
+	and,<= %r4,%r5,%r6
+	and,od %r4,%r5,%r6
+	and,tr %r4,%r5,%r6
+	and,<> %r4,%r5,%r6
+	and,>= %r4,%r5,%r6
+	and,> %r4,%r5,%r6
+	and,ev %r4,%r5,%r6
+
+andcm_tests
+	andcm %r4,%r5,%r6
+	andcm,= %r4,%r5,%r6
+	andcm,< %r4,%r5,%r6
+	andcm,<= %r4,%r5,%r6
+	andcm,od %r4,%r5,%r6
+	andcm,tr %r4,%r5,%r6
+	andcm,<> %r4,%r5,%r6
+	andcm,>= %r4,%r5,%r6
+	andcm,> %r4,%r5,%r6
+	andcm,ev %r4,%r5,%r6
+
+
+uxor_tests
+	uxor %r4,%r5,%r6
+	uxor,sbz %r4,%r5,%r6
+	uxor,shz %r4,%r5,%r6
+	uxor,sdc %r4,%r5,%r6
+	uxor,sbc %r4,%r5,%r6
+	uxor,shc %r4,%r5,%r6
+	uxor,tr %r4,%r5,%r6
+	uxor,nbz %r4,%r5,%r6
+	uxor,nhz %r4,%r5,%r6
+	uxor,ndc %r4,%r5,%r6
+	uxor,nbc %r4,%r5,%r6
+	uxor,nhc %r4,%r5,%r6
+
+uaddcm_tests
+	uaddcm %r4,%r5,%r6
+	uaddcm,sbz %r4,%r5,%r6
+	uaddcm,shz %r4,%r5,%r6
+	uaddcm,sdc %r4,%r5,%r6
+	uaddcm,sbc %r4,%r5,%r6
+	uaddcm,shc %r4,%r5,%r6
+	uaddcm,tr %r4,%r5,%r6
+	uaddcm,nbz %r4,%r5,%r6
+	uaddcm,nhz %r4,%r5,%r6
+	uaddcm,ndc %r4,%r5,%r6
+	uaddcm,nbc %r4,%r5,%r6
+	uaddcm,nhc %r4,%r5,%r6
+
+uaddcmt_tests
+	uaddcmt %r4,%r5,%r6
+	uaddcmt,sbz %r4,%r5,%r6
+	uaddcmt,shz %r4,%r5,%r6
+	uaddcmt,sdc %r4,%r5,%r6
+	uaddcmt,sbc %r4,%r5,%r6
+	uaddcmt,shc %r4,%r5,%r6
+	uaddcmt,tr %r4,%r5,%r6
+	uaddcmt,nbz %r4,%r5,%r6
+	uaddcmt,nhz %r4,%r5,%r6
+	uaddcmt,ndc %r4,%r5,%r6
+	uaddcmt,nbc %r4,%r5,%r6
+	uaddcmt,nhc %r4,%r5,%r6
+
+dcor_tests
+	dcor %r4,%r5
+	dcor,sbz %r4,%r5
+	dcor,shz %r4,%r5
+	dcor,sdc %r4,%r5
+	dcor,sbc %r4,%r5
+	dcor,shc %r4,%r5
+	dcor,tr %r4,%r5
+	dcor,nbz %r4,%r5
+	dcor,nhz %r4,%r5
+	dcor,ndc %r4,%r5
+	dcor,nbc %r4,%r5
+	dcor,nhc %r4,%r5
+
+idcor_tests
+	idcor %r4,%r5
+	idcor,sbz %r4,%r5
+	idcor,shz %r4,%r5
+	idcor,sdc %r4,%r5
+	idcor,sbc %r4,%r5
+	idcor,shc %r4,%r5
+	idcor,tr %r4,%r5
+	idcor,nbz %r4,%r5
+	idcor,nhz %r4,%r5
+	idcor,ndc %r4,%r5
+	idcor,nbc %r4,%r5
+	idcor,nhc %r4,%r5
+
+addi_tests
+	addi  123,%r5,%r6
+	addi,=  123,%r5,%r6
+	addi,<  123,%r5,%r6
+	addi,<=  123,%r5,%r6
+	addi,nuv  123,%r5,%r6
+	addi,znv  123,%r5,%r6
+	addi,sv  123,%r5,%r6
+	addi,od  123,%r5,%r6
+	addi,tr  123,%r5,%r6
+	addi,<>  123,%r5,%r6
+	addi,>=  123,%r5,%r6
+	addi,>  123,%r5,%r6
+	addi,uv  123,%r5,%r6
+	addi,vnz  123,%r5,%r6
+	addi,nsv  123,%r5,%r6
+	addi,ev  123,%r5,%r6
+
+addio_tests
+	addio  123,%r5,%r6
+	addio,=  123,%r5,%r6
+	addio,<  123,%r5,%r6
+	addio,<=  123,%r5,%r6
+	addio,nuv  123,%r5,%r6
+	addio,znv  123,%r5,%r6
+	addio,sv  123,%r5,%r6
+	addio,od  123,%r5,%r6
+	addio,tr  123,%r5,%r6
+	addio,<>  123,%r5,%r6
+	addio,>=  123,%r5,%r6
+	addio,>  123,%r5,%r6
+	addio,uv  123,%r5,%r6
+	addio,vnz  123,%r5,%r6
+	addio,nsv  123,%r5,%r6
+	addio,ev  123,%r5,%r6
+
+addit_tests
+	addit  123,%r5,%r6
+	addit,=  123,%r5,%r6
+	addit,<  123,%r5,%r6
+	addit,<=  123,%r5,%r6
+	addit,nuv  123,%r5,%r6
+	addit,znv  123,%r5,%r6
+	addit,sv  123,%r5,%r6
+	addit,od  123,%r5,%r6
+	addit,tr  123,%r5,%r6
+	addit,<>  123,%r5,%r6
+	addit,>=  123,%r5,%r6
+	addit,>  123,%r5,%r6
+	addit,uv  123,%r5,%r6
+	addit,vnz  123,%r5,%r6
+	addit,nsv  123,%r5,%r6
+	addit,ev  123,%r5,%r6
+
+addito_tests
+	addito  123,%r5,%r6
+	addito,=  123,%r5,%r6
+	addito,<  123,%r5,%r6
+	addito,<=  123,%r5,%r6
+	addito,nuv  123,%r5,%r6
+	addito,znv  123,%r5,%r6
+	addito,sv  123,%r5,%r6
+	addito,od  123,%r5,%r6
+	addito,tr  123,%r5,%r6
+	addito,<>  123,%r5,%r6
+	addito,>=  123,%r5,%r6
+	addito,>  123,%r5,%r6
+	addito,uv  123,%r5,%r6
+	addito,vnz  123,%r5,%r6
+	addito,nsv  123,%r5,%r6
+	addito,ev  123,%r5,%r6
+
+subi_tests
+	subi 123,%r5,%r6
+	subi,= 123,%r5,%r6
+	subi,< 123,%r5,%r6
+	subi,<= 123,%r5,%r6
+	subi,<< 123,%r5,%r6
+	subi,<<= 123,%r5,%r6
+	subi,sv 123,%r5,%r6
+	subi,od 123,%r5,%r6
+	subi,tr 123,%r5,%r6
+	subi,<> 123,%r5,%r6
+	subi,>= 123,%r5,%r6
+	subi,> 123,%r5,%r6
+	subi,>>= 123,%r5,%r6
+	subi,>> 123,%r5,%r6
+	subi,nsv 123,%r5,%r6
+	subi,ev 123,%r5,%r6
+
+subio_tests
+	subio 123,%r5,%r6
+	subio,= 123,%r5,%r6
+	subio,< 123,%r5,%r6
+	subio,<= 123,%r5,%r6
+	subio,<< 123,%r5,%r6
+	subio,<<= 123,%r5,%r6
+	subio,sv 123,%r5,%r6
+	subio,od 123,%r5,%r6
+	subio,tr 123,%r5,%r6
+	subio,<> 123,%r5,%r6
+	subio,>= 123,%r5,%r6
+	subio,> 123,%r5,%r6
+	subio,>>= 123,%r5,%r6
+	subio,>> 123,%r5,%r6
+	subio,nsv 123,%r5,%r6
+	subio,ev 123,%r5,%r6
+
+comiclr_tests
+	comiclr 123,%r5,%r6
+	comiclr,= 123,%r5,%r6
+	comiclr,< 123,%r5,%r6
+	comiclr,<= 123,%r5,%r6
+	comiclr,<< 123,%r5,%r6
+	comiclr,<<= 123,%r5,%r6
+	comiclr,sv 123,%r5,%r6
+	comiclr,od 123,%r5,%r6
+	comiclr,tr 123,%r5,%r6
+	comiclr,<> 123,%r5,%r6
+	comiclr,>= 123,%r5,%r6
+	comiclr,> 123,%r5,%r6
+	comiclr,>>= 123,%r5,%r6
+	comiclr,>> 123,%r5,%r6
+	comiclr,nsv 123,%r5,%r6
+	comiclr,ev 123,%r5,%r6
+
+vshd_tests
+	vshd %r4,%r5,%r6
+	vshd,= %r4,%r5,%r6
+	vshd,< %r4,%r5,%r6
+	vshd,od %r4,%r5,%r6
+	vshd,tr %r4,%r5,%r6
+	vshd,<> %r4,%r5,%r6
+	vshd,>= %r4,%r5,%r6
+	vshd,ev %r4,%r5,%r6
+
+shd_tests
+	shd %r4,%r5,5,%r6
+	shd,= %r4,%r5,5,%r6
+	shd,< %r4,%r5,5,%r6
+	shd,od %r4,%r5,5,%r6
+	shd,tr %r4,%r5,5,%r6
+	shd,<> %r4,%r5,5,%r6
+	shd,>= %r4,%r5,5,%r6
+	shd,ev %r4,%r5,5,%r6
+
+extru_tests
+	extru %r4,5,10,%r6
+	extru,= %r4,5,10,%r6
+	extru,< %r4,5,10,%r6
+	extru,od %r4,5,10,%r6
+	extru,tr %r4,5,10,%r6
+	extru,<> %r4,5,10,%r6
+	extru,>= %r4,5,10,%r6
+	extru,ev %r4,5,10,%r6
+
+extrs_tests
+	extrs %r4,5,10,%r6
+	extrs,= %r4,5,10,%r6
+	extrs,< %r4,5,10,%r6
+	extrs,od %r4,5,10,%r6
+	extrs,tr %r4,5,10,%r6
+	extrs,<> %r4,5,10,%r6
+	extrs,>= %r4,5,10,%r6
+	extrs,ev %r4,5,10,%r6
+
+zdep_tests
+	zdep %r4,5,10,%r6
+	zdep,= %r4,5,10,%r6
+	zdep,< %r4,5,10,%r6
+	zdep,od %r4,5,10,%r6
+	zdep,tr %r4,5,10,%r6
+	zdep,<> %r4,5,10,%r6
+	zdep,>= %r4,5,10,%r6
+	zdep,ev %r4,5,10,%r6
+
+dep_tests
+	dep %r4,5,10,%r6
+	dep,= %r4,5,10,%r6
+	dep,< %r4,5,10,%r6
+	dep,od %r4,5,10,%r6
+	dep,tr %r4,5,10,%r6
+	dep,<> %r4,5,10,%r6
+	dep,>= %r4,5,10,%r6
+	dep,ev %r4,5,10,%r6
+
+vextru_tests
+	vextru %r4,5,%r6
+	vextru,= %r4,5,%r6
+	vextru,< %r4,5,%r6
+	vextru,od %r4,5,%r6
+	vextru,tr %r4,5,%r6
+	vextru,<> %r4,5,%r6
+	vextru,>= %r4,5,%r6
+	vextru,ev %r4,5,%r6
+
+vextrs_tests
+	vextrs %r4,5,%r6
+	vextrs,= %r4,5,%r6
+	vextrs,< %r4,5,%r6
+	vextrs,od %r4,5,%r6
+	vextrs,tr %r4,5,%r6
+	vextrs,<> %r4,5,%r6
+	vextrs,>= %r4,5,%r6
+	vextrs,ev %r4,5,%r6
+
+zvdep_tests
+	zvdep %r4,5,%r6
+	zvdep,= %r4,5,%r6
+	zvdep,< %r4,5,%r6
+	zvdep,od %r4,5,%r6
+	zvdep,tr %r4,5,%r6
+	zvdep,<> %r4,5,%r6
+	zvdep,>= %r4,5,%r6
+	zvdep,ev %r4,5,%r6
+
+
+vdep_tests
+	vdep %r4,5,%r6
+	vdep,= %r4,5,%r6
+	vdep,< %r4,5,%r6
+	vdep,od %r4,5,%r6
+	vdep,tr %r4,5,%r6
+	vdep,<> %r4,5,%r6
+	vdep,>= %r4,5,%r6
+	vdep,ev %r4,5,%r6
+
+vdepi_tests
+	vdepi -1,5,%r6
+	vdepi,= -1,5,%r6
+	vdepi,< -1,5,%r6
+	vdepi,od -1,5,%r6
+	vdepi,tr -1,5,%r6
+	vdepi,<> -1,5,%r6
+	vdepi,>= -1,5,%r6
+	vdepi,ev -1,5,%r6
+
+zvdepi_tests
+	zvdepi -1,5,%r6
+	zvdepi,= -1,5,%r6
+	zvdepi,< -1,5,%r6
+	zvdepi,od -1,5,%r6
+	zvdepi,tr -1,5,%r6
+	zvdepi,<> -1,5,%r6
+	zvdepi,>= -1,5,%r6
+	zvdepi,ev -1,5,%r6
+
+depi_tests
+	depi -1,4,10,%r6
+	depi,= -1,4,10,%r6
+	depi,< -1,4,10,%r6
+	depi,od -1,4,10,%r6
+	depi,tr -1,4,10,%r6
+	depi,<> -1,4,10,%r6
+	depi,>= -1,4,10,%r6
+	depi,ev -1,4,10,%r6
+
+zdepi_tests
+	zdepi -1,4,10,%r6
+	zdepi,= -1,4,10,%r6
+	zdepi,< -1,4,10,%r6
+	zdepi,od -1,4,10,%r6
+	zdepi,tr -1,4,10,%r6
+	zdepi,<> -1,4,10,%r6
+	zdepi,>= -1,4,10,%r6
+	zdepi,ev -1,4,10,%r6
+
+
+system_control_tests
+	break 5,12
+	rfi
+	rfir
+	ssm 5,%r4
+	rsm 5,%r4
+	mtsm %r4
+	ldsid (%sr0,%r5),%r4
+	mtsp %r4,%sr0
+	mtctl %r4,%cr10
+	mfsp %sr0,%r4
+	mfctl %cr10,%r4
+	sync
+	syncdma
+	diag 1234
+
+probe_tests
+	prober (%sr0,%r5),%r6,%r7
+	proberi (%sr0,%r5),1,%r7
+	probew (%sr0,%r5),%r6,%r7
+	probewi (%sr0,%r5),1,%r7
+	
+lpa_tests
+	lpa %r4(%sr0,%r5),%r6
+	lpa,m %r4(%sr0,%r5),%r6
+	lha %r4(%sr0,%r5),%r6
+	lha,m %r4(%sr0,%r5),%r6
+	lci %r4(%sr0,%r5),%r6
+
+purge_tests
+	pdtlb %r4(%sr0,%r5)
+	pdtlb,m %r4(%sr0,%r5)
+	pitlb %r4(%sr0,%r5)
+	pitlb,m %r4(%sr0,%r5)
+	pdtlbe %r4(%sr0,%r5)
+	pdtlbe,m %r4(%sr0,%r5)
+	pitlbe %r4(%sr0,%r5)
+	pitlbe,m %r4(%sr0,%r5)
+	pdc %r4(%sr0,%r5)
+	pdc,m %r4(%sr0,%r5)
+	fdc %r4(%sr0,%r5)
+	fdc,m %r4(%sr0,%r5)
+	fic %r4(%sr0,%r5)
+	fic,m %r4(%sr0,%r5)
+	fdce %r4(%sr0,%r5)
+	fdce,m %r4(%sr0,%r5)
+	fice %r4(%sr0,%r5)
+	fice,m %r4(%sr0,%r5)
+
+insert_tests
+	idtlba %r4,(%sr0,%r5)
+	iitlba %r4,(%sr0,%r5)
+	idtlbp %r4,(%sr0,%r5)
+	iitlbp %r4,(%sr0,%r5)
+
+fpu_misc_tests
+	ftest
+
+fpu_memory_indexing_tests
+	fldwx %r4(%sr0,%r5),%fr6
+	fldwx,s %r4(%sr0,%r5),%fr6
+	fldwx,m %r4(%sr0,%r5),%fr6
+	fldwx,sm %r4(%sr0,%r5),%fr6
+	flddx %r4(%sr0,%r5),%fr6
+	flddx,s %r4(%sr0,%r5),%fr6
+	flddx,m %r4(%sr0,%r5),%fr6
+	flddx,sm %r4(%sr0,%r5),%fr6
+	fstwx %fr6,%r4(%sr0,%r5)
+	fstwx,s %fr6,%r4(%sr0,%r5)
+	fstwx,m %fr6,%r4(%sr0,%r5)
+	fstwx,sm %fr6,%r4(%sr0,%r5)
+	fstdx %fr6,%r4(%sr0,%r5)
+	fstdx,s %fr6,%r4(%sr0,%r5)
+	fstdx,m %fr6,%r4(%sr0,%r5)
+	fstdx,sm %fr6,%r4(%sr0,%r5)
+	fstqx %fr6,%r4(%sr0,%r5)
+	fstqx,s %fr6,%r4(%sr0,%r5)
+	fstqx,m %fr6,%r4(%sr0,%r5)
+	fstqx,sm %fr6,%r4(%sr0,%r5)
+
+fpu_short_memory_tests
+	fldws 0(%sr0,%r5),%fr6
+	fldws,mb 0(%sr0,%r5),%fr6
+	fldws,ma 0(%sr0,%r5),%fr6
+	fldds 0(%sr0,%r5),%fr6
+	fldds,mb 0(%sr0,%r5),%fr6
+	fldds,ma 0(%sr0,%r5),%fr6
+	fstws %fr6,0(%sr0,%r5)
+	fstws,mb %fr6,0(%sr0,%r5)
+	fstws,ma %fr6,0(%sr0,%r5)
+	fstds %fr6,0(%sr0,%r5)
+	fstds,mb %fr6,0(%sr0,%r5)
+	fstds,ma %fr6,0(%sr0,%r5)
+	fstqs %fr6,0(%sr0,%r5)
+	fstqs,mb %fr6,0(%sr0,%r5)
+	fstqs,ma %fr6,0(%sr0,%r5)
+
+
+fcpy_tests
+	fcpy,sgl %fr5,%fr10
+	fcpy,dbl %fr5,%fr10
+	fcpy,quad %fr5,%fr10
+	fcpy,sgl %fr20,%fr24
+	fcpy,dbl %fr20,%fr24
+
+fabs_tests
+	fabs,sgl %fr5,%fr10
+	fabs,dbl %fr5,%fr10
+	fabs,quad %fr5,%fr10
+	fabs,sgl %fr20,%fr24
+	fabs,dbl %fr20,%fr24
+
+fsqrt_tests
+	fsqrt,sgl %fr5,%fr10
+	fsqrt,dbl %fr5,%fr10
+	fsqrt,quad %fr5,%fr10
+	fsqrt,sgl %fr20,%fr24
+	fsqrt,dbl %fr20,%fr24
+
+frnd_tests
+	frnd,sgl %fr5,%fr10
+	frnd,dbl %fr5,%fr10
+	frnd,quad %fr5,%fr10
+	frnd,sgl %fr20,%fr24
+	frnd,dbl %fr20,%fr24
+	
+fcnvff_tests
+	fcnvff,sgl,sgl %fr5,%fr10
+	fcnvff,sgl,dbl %fr5,%fr10
+	fcnvff,sgl,quad %fr5,%fr10
+	fcnvff,dbl,sgl %fr5,%fr10
+	fcnvff,dbl,dbl %fr5,%fr10
+	fcnvff,dbl,quad %fr5,%fr10
+	fcnvff,quad,sgl %fr5,%fr10
+	fcnvff,quad,dbl %fr5,%fr10
+	fcnvff,quad,quad %fr5,%fr10
+	fcnvff,sgl,sgl %fr20,%fr24
+	fcnvff,sgl,dbl %fr20,%fr24
+	fcnvff,sgl,quad %fr20,%fr24
+	fcnvff,dbl,sgl %fr20,%fr24
+	fcnvff,dbl,dbl %fr20,%fr24
+	fcnvff,dbl,quad %fr20,%fr24
+	fcnvff,quad,sgl %fr20,%fr24
+	fcnvff,quad,dbl %fr20,%fr24
+	fcnvff,quad,quad %fr20,%fr24
+
+fcnvxf_tests
+	fcnvxf,sgl,sgl %fr5,%fr10
+	fcnvxf,sgl,dbl %fr5,%fr10
+	fcnvxf,sgl,quad %fr5,%fr10
+	fcnvxf,dbl,sgl %fr5,%fr10
+	fcnvxf,dbl,dbl %fr5,%fr10
+	fcnvxf,dbl,quad %fr5,%fr10
+	fcnvxf,quad,sgl %fr5,%fr10
+	fcnvxf,quad,dbl %fr5,%fr10
+	fcnvxf,quad,quad %fr5,%fr10
+	fcnvxf,sgl,sgl %fr20,%fr24
+	fcnvxf,sgl,dbl %fr20,%fr24
+	fcnvxf,sgl,quad %fr20,%fr24
+	fcnvxf,dbl,sgl %fr20,%fr24
+	fcnvxf,dbl,dbl %fr20,%fr24
+	fcnvxf,dbl,quad %fr20,%fr24
+	fcnvxf,quad,sgl %fr20,%fr24
+	fcnvxf,quad,dbl %fr20,%fr24
+	fcnvxf,quad,quad %fr20,%fr24
+
+fcnvfx_tests
+	fcnvfx,sgl,sgl %fr5,%fr10
+	fcnvfx,sgl,dbl %fr5,%fr10
+	fcnvfx,sgl,quad %fr5,%fr10
+	fcnvfx,dbl,sgl %fr5,%fr10
+	fcnvfx,dbl,dbl %fr5,%fr10
+	fcnvfx,dbl,quad %fr5,%fr10
+	fcnvfx,quad,sgl %fr5,%fr10
+	fcnvfx,quad,dbl %fr5,%fr10
+	fcnvfx,quad,quad %fr5,%fr10
+	fcnvfx,sgl,sgl %fr20,%fr24
+	fcnvfx,sgl,dbl %fr20,%fr24
+	fcnvfx,sgl,quad %fr20,%fr24
+	fcnvfx,dbl,sgl %fr20,%fr24
+	fcnvfx,dbl,dbl %fr20,%fr24
+	fcnvfx,dbl,quad %fr20,%fr24
+	fcnvfx,quad,sgl %fr20,%fr24
+	fcnvfx,quad,dbl %fr20,%fr24
+	fcnvfx,quad,quad %fr20,%fr24
+
+fcnvfxt_tests
+	fcnvfxt,sgl,sgl %fr5,%fr10
+	fcnvfxt,sgl,dbl %fr5,%fr10
+	fcnvfxt,sgl,quad %fr5,%fr10
+	fcnvfxt,dbl,sgl %fr5,%fr10
+	fcnvfxt,dbl,dbl %fr5,%fr10
+	fcnvfxt,dbl,quad %fr5,%fr10
+	fcnvfxt,quad,sgl %fr5,%fr10
+	fcnvfxt,quad,dbl %fr5,%fr10
+	fcnvfxt,quad,quad %fr5,%fr10
+	fcnvfxt,sgl,sgl %fr20,%fr24
+	fcnvfxt,sgl,dbl %fr20,%fr24
+	fcnvfxt,sgl,quad %fr20,%fr24
+	fcnvfxt,dbl,sgl %fr20,%fr24
+	fcnvfxt,dbl,dbl %fr20,%fr24
+	fcnvfxt,dbl,quad %fr20,%fr24
+	fcnvfxt,quad,sgl %fr20,%fr24
+	fcnvfxt,quad,dbl %fr20,%fr24
+	fcnvfxt,quad,quad %fr20,%fr24
+
+fadd_tests
+	fadd,sgl %fr4,%fr8,%fr12
+	fadd,dbl %fr4,%fr8,%fr12
+	fadd,quad %fr4,%fr8,%fr12
+	fadd,sgl %fr20,%fr24,%fr28
+	fadd,dbl %fr20,%fr24,%fr28
+	fadd,quad %fr20,%fr24,%fr28
+
+fsub_tests
+	fsub,sgl %fr4,%fr8,%fr12
+	fsub,dbl %fr4,%fr8,%fr12
+	fsub,quad %fr4,%fr8,%fr12
+	fsub,sgl %fr20,%fr24,%fr28
+	fsub,dbl %fr20,%fr24,%fr28
+	fsub,quad %fr20,%fr24,%fr28
+
+fmpy_tests
+	fmpy,sgl %fr4,%fr8,%fr12
+	fmpy,dbl %fr4,%fr8,%fr12
+	fmpy,quad %fr4,%fr8,%fr12
+	fmpy,sgl %fr20,%fr24,%fr28
+	fmpy,dbl %fr20,%fr24,%fr28
+	fmpy,quad %fr20,%fr24,%fr28
+
+fdiv_tests
+	fdiv,sgl %fr4,%fr8,%fr12
+	fdiv,dbl %fr4,%fr8,%fr12
+	fdiv,quad %fr4,%fr8,%fr12
+	fdiv,sgl %fr20,%fr24,%fr28
+	fdiv,dbl %fr20,%fr24,%fr28
+	fdiv,quad %fr20,%fr24,%fr28
+
+frem_tests
+	frem,sgl %fr4,%fr8,%fr12
+	frem,dbl %fr4,%fr8,%fr12
+	frem,quad %fr4,%fr8,%fr12
+	frem,sgl %fr20,%fr24,%fr28
+	frem,dbl %fr20,%fr24,%fr28
+	frem,quad %fr20,%fr24,%fr28
+
+fcmp_sgl_tests_1
+	fcmp,sgl,false? %fr4,%fr5
+	fcmp,sgl,false %fr4,%fr5
+	fcmp,sgl,? %fr4,%fr5
+	fcmp,sgl,!<=> %fr4,%fr5
+	fcmp,sgl,= %fr4,%fr5
+	fcmp,sgl,=T %fr4,%fr5
+	fcmp,sgl,?= %fr4,%fr5
+	fcmp,sgl,!<> %fr4,%fr5
+fcmp_sgl_tests_2
+	fcmp,sgl,!?>= %fr4,%fr5
+	fcmp,sgl,< %fr4,%fr5
+	fcmp,sgl,?< %fr4,%fr5
+	fcmp,sgl,!>= %fr4,%fr5
+	fcmp,sgl,!?> %fr4,%fr5
+	fcmp,sgl,<= %fr4,%fr5
+	fcmp,sgl,?<= %fr4,%fr5
+	fcmp,sgl,!> %fr4,%fr5
+fcmp_sgl_tests_3
+	fcmp,sgl,!?<= %fr4,%fr5
+	fcmp,sgl,> %fr4,%fr5
+	fcmp,sgl,?> %fr4,%fr5
+	fcmp,sgl,!<= %fr4,%fr5
+	fcmp,sgl,!?< %fr4,%fr5
+	fcmp,sgl,>= %fr4,%fr5
+	fcmp,sgl,?>= %fr4,%fr5
+	fcmp,sgl,!< %fr4,%fr5
+fcmp_sgl_tests_4
+	fcmp,sgl,!?= %fr4,%fr5
+	fcmp,sgl,<> %fr4,%fr5
+	fcmp,sgl,!= %fr4,%fr5
+	fcmp,sgl,!=T %fr4,%fr5
+	fcmp,sgl,!? %fr4,%fr5
+	fcmp,sgl,<=> %fr4,%fr5
+	fcmp,sgl,true? %fr4,%fr5
+	fcmp,sgl,true %fr4,%fr5
+
+fcmp_dbl_tests_1
+	fcmp,dbl,false? %fr4,%fr5
+	fcmp,dbl,false %fr4,%fr5
+	fcmp,dbl,? %fr4,%fr5
+	fcmp,dbl,!<=> %fr4,%fr5
+	fcmp,dbl,= %fr4,%fr5
+	fcmp,dbl,=T %fr4,%fr5
+	fcmp,dbl,?= %fr4,%fr5
+	fcmp,dbl,!<> %fr4,%fr5
+fcmp_dbl_tests_2
+	fcmp,dbl,!?>= %fr4,%fr5
+	fcmp,dbl,< %fr4,%fr5
+	fcmp,dbl,?< %fr4,%fr5
+	fcmp,dbl,!>= %fr4,%fr5
+	fcmp,dbl,!?> %fr4,%fr5
+	fcmp,dbl,<= %fr4,%fr5
+	fcmp,dbl,?<= %fr4,%fr5
+	fcmp,dbl,!> %fr4,%fr5
+fcmp_dbl_tests_3
+	fcmp,dbl,!?<= %fr4,%fr5
+	fcmp,dbl,> %fr4,%fr5
+	fcmp,dbl,?> %fr4,%fr5
+	fcmp,dbl,!<= %fr4,%fr5
+	fcmp,dbl,!?< %fr4,%fr5
+	fcmp,dbl,>= %fr4,%fr5
+	fcmp,dbl,?>= %fr4,%fr5
+	fcmp,dbl,!< %fr4,%fr5
+fcmp_dbl_tests_4
+	fcmp,dbl,!?= %fr4,%fr5
+	fcmp,dbl,<> %fr4,%fr5
+	fcmp,dbl,!= %fr4,%fr5
+	fcmp,dbl,!=T %fr4,%fr5
+	fcmp,dbl,!? %fr4,%fr5
+	fcmp,dbl,<=> %fr4,%fr5
+	fcmp,dbl,true? %fr4,%fr5
+	fcmp,dbl,true %fr4,%fr5
+
+fcmp_quad_tests_1
+	fcmp,quad,false? %fr4,%fr5
+	fcmp,quad,false %fr4,%fr5
+	fcmp,quad,? %fr4,%fr5
+	fcmp,quad,!<=> %fr4,%fr5
+	fcmp,quad,= %fr4,%fr5
+	fcmp,quad,=T %fr4,%fr5
+	fcmp,quad,?= %fr4,%fr5
+	fcmp,quad,!<> %fr4,%fr5
+fcmp_quad_tests_2
+	fcmp,quad,!?>= %fr4,%fr5
+	fcmp,quad,< %fr4,%fr5
+	fcmp,quad,?< %fr4,%fr5
+	fcmp,quad,!>= %fr4,%fr5
+	fcmp,quad,!?> %fr4,%fr5
+	fcmp,quad,<= %fr4,%fr5
+	fcmp,quad,?<= %fr4,%fr5
+	fcmp,quad,!> %fr4,%fr5
+fcmp_quad_tests_3
+	fcmp,quad,!?<= %fr4,%fr5
+	fcmp,quad,> %fr4,%fr5
+	fcmp,quad,?> %fr4,%fr5
+	fcmp,quad,!<= %fr4,%fr5
+	fcmp,quad,!?< %fr4,%fr5
+	fcmp,quad,>= %fr4,%fr5
+	fcmp,quad,?>= %fr4,%fr5
+	fcmp,quad,!< %fr4,%fr5
+fcmp_quad_tests_4
+	fcmp,quad,!?= %fr4,%fr5
+	fcmp,quad,<> %fr4,%fr5
+	fcmp,quad,!= %fr4,%fr5
+	fcmp,quad,!=T %fr4,%fr5
+	fcmp,quad,!? %fr4,%fr5
+	fcmp,quad,<=> %fr4,%fr5
+	fcmp,quad,true? %fr4,%fr5
+	fcmp,quad,true %fr4,%fr5
+
+fmpy_addsub_tests
+	fmpyadd,sgl %fr16,%fr17,%fr18,%fr19,%fr20
+	fmpyadd,dbl %fr16,%fr17,%fr18,%fr19,%fr20
+	fmpysub,sgl %fr16,%fr17,%fr18,%fr19,%fr20
+	fmpysub,dbl %fr16,%fr17,%fr18,%fr19,%fr20
+
+xmpyu_tests
+	xmpyu %fr4,%fr5,%fr6
+
+special_tests
+	gfw %r4(%sr0,%r5)
+	gfw,m %r4(%sr0,%r5)
+	gfr %r4(%sr0,%r5)
+	gfr,m %r4(%sr0,%r5)
+
+sfu_tests
+	spop0,4,5
+	spop0,4,115
+	spop0,4,5,n
+	spop0,4,115,n
+	spop1,4,5 5
+	spop1,4,115 5
+	spop1,4,5,n 5
+	spop1,4,115,n 5
+	spop2,4,5 5
+	spop2,4,115 5
+	spop2,4,5,n 5
+	spop2,4,115,n 5
+	spop3,4,5 5,6
+	spop3,4,115 5,6
+	spop3,4,5,n 5,6
+	spop3,4,115,n 5,6
+
+copr_tests
+	copr,4,5
+	copr,4,115
+	copr,4,5,n
+	copr,4,115,n
+
+copr_indexing_load 
+	cldwx,4 5(0,4),26
+	cldwx,4,s 5(0,4),26
+	cldwx,4,m 5(0,4),26
+	cldwx,4,sm 5(0,4),26
+	clddx,4 5(0,4),26
+	clddx,4,s 5(0,4),26
+	clddx,4,m 5(0,4),26
+	clddx,4,sm 5(0,4),26
+
+copr_indexing_store 
+	cstwx,4 26,5(0,4)
+	cstwx,4,s 26,5(0,4)
+	cstwx,4,m 26,5(0,4)
+	cstwx,4,sm 26,5(0,4)
+	cstdx,4 26,5(0,4)
+	cstdx,4,s 26,5(0,4)
+	cstdx,4,m 26,5(0,4)
+	cstdx,4,sm 26,5(0,4)
+
+copr_short_memory 
+	cldws,4 0(0,4),26
+	cldws,4,mb 0(0,4),26
+	cldws,4,ma 0(0,4),26
+	cldds,4 0(0,4),26
+	cldds,4,mb 0(0,4),26
+	cldds,4,ma 0(0,4),26
+	cstws,4 26,0(0,4)
+	cstws,4,mb 26,0(0,4)
+	cstws,4,ma 26,0(0,4)
+	cstds,4 26,0(0,4)
+	cstds,4,mb 26,0(0,4)
+	cstds,4,ma 26,0(0,4)
+
+fmemLRbug_tests_1
+	fstws	%fr6R,0(%r26)
+	fstws	%fr6L,4(%r26)
+	fstws	%fr6,8(%r26)
+	fstds	%fr6R,0(%r26)
+	fstds	%fr6L,4(%r26)
+	fstds	%fr6,8(%r26)
+	fldws	0(%r26),%fr6R
+	fldws	4(%r26),%fr6L
+	fldws	8(%r26),%fr6
+	fldds	0(%r26),%fr6R
+	fldds	4(%r26),%fr6L
+	fldds	8(%r26),%fr6
+
+fmemLRbug_tests_2
+	fstws	%fr6R,0(%sr0,%r26)
+	fstws	%fr6L,4(%sr0,%r26)
+	fstws	%fr6,8(%sr0,%r26)
+	fstds	%fr6R,0(%sr0,%r26)
+	fstds	%fr6L,4(%sr0,%r26)
+	fstds	%fr6,8(%sr0,%r26)
+	fldws	0(%sr0,%r26),%fr6R
+	fldws	4(%sr0,%r26),%fr6L
+	fldws	8(%sr0,%r26),%fr6
+	fldds	0(%sr0,%r26),%fr6R
+	fldds	4(%sr0,%r26),%fr6L
+	fldds	8(%sr0,%r26),%fr6
+
+fmemLRbug_tests_3
+	fstwx	%fr6R,%r25(%r26)
+	fstwx	%fr6L,%r25(%r26)
+	fstwx	%fr6,%r25(%r26)
+	fstdx	%fr6R,%r25(%r26)
+	fstdx	%fr6L,%r25(%r26)
+	fstdx	%fr6,%r25(%r26)
+	fldwx	%r25(%r26),%fr6R
+	fldwx	%r25(%r26),%fr6L
+	fldwx	%r25(%r26),%fr6
+	flddx	%r25(%r26),%fr6R
+	flddx	%r25(%r26),%fr6L
+	flddx	%r25(%r26),%fr6
+
+fmemLRbug_tests_4
+	fstwx	%fr6R,%r25(%sr0,%r26)
+	fstwx	%fr6L,%r25(%sr0,%r26)
+	fstwx	%fr6,%r25(%sr0,%r26)
+	fstdx	%fr6R,%r25(%sr0,%r26)
+	fstdx	%fr6L,%r25(%sr0,%r26)
+	fstdx	%fr6,%r25(%sr0,%r26)
+	fldwx	%r25(%sr0,%r26),%fr6R
+	fldwx	%r25(%sr0,%r26),%fr6L
+	fldwx	%r25(%sr0,%r26),%fr6
+	flddx	%r25(%sr0,%r26),%fr6R
+	flddx	%r25(%sr0,%r26),%fr6L
+	flddx	%r25(%sr0,%r26),%fr6
+
+	ldw 0(0,%r4),%r26
+	ldw 0(0,%r4),%r26
+	ldo 64(%r4),%r30
+	ldwm -64(0,%r30),%r4
+	bv,n 0(%r2)
+	.EXIT
+	.PROCEND
diff --git a/gdb/testsuite/gdb.disasm/mn10200.exp b/gdb/testsuite/gdb.disasm/mn10200.exp
new file mode 100644
index 0000000..f9e71df
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/mn10200.exp
@@ -0,0 +1,478 @@
+
+# Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if ![istarget "mn10200*-*-*"] {
+    verbose "Tests ignored for all but mn10200 based targets."
+    return
+}
+
+global exec_output
+set prms_id 0
+set bug_id 0
+
+set testfile "mn10200"
+set srcfile ${srcdir}/${subdir}/${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcfile}" "${binfile}" executable ""] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc add_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12i add_tests\n"
+    gdb_expect {
+	-re "
+.*add	d1,d2.*
+.*add	d2,a3.*
+.*add	a2,d1.*
+.*add	a3,a2.*
+.*add	16,d1.*
+.*add	256,d2.*
+.*add	131071,d3.*
+.*add	16,a1.*
+.*add	256,a2.*
+.*add	131071,a3.*
+.*addc	d1,d2.*
+.*addnf	16,a2.*
+.*$gdb_prompt $" { pass "add tests" }
+	-re "$gdb_prompt $" { fail "add tests" }
+	timeout { fail "(timeout) add tests" }
+    }
+}
+
+proc bcc_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/15i bCC_tests\n"
+    gdb_expect {
+	-re "
+.*beq	0x\[0-9a-f]+ <bCC_tests>.*
+.*bne	0x\[0-9a-f]+ <bCC_tests>.*
+.*bgt	0x\[0-9a-f]+ <bCC_tests>.*
+.*bge	0x\[0-9a-f]+ <bCC_tests>.*
+.*ble	0x\[0-9a-f]+ <bCC_tests>.*
+.*blt	0x\[0-9a-f]+ <bCC_tests>.*
+.*bhi	0x\[0-9a-f]+ <bCC_tests>.*
+.*bcc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bls	0x\[0-9a-f]+ <bCC_tests>.*
+.*bcs	0x\[0-9a-f]+ <bCC_tests>.*
+.*bvc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bvs	0x\[0-9a-f]+ <bCC_tests>.*
+.*bnc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bns	0x\[0-9a-f]+ <bCC_tests>.*
+.*bra	0x\[0-9a-f]+ <bCC_tests>.*
+.*$gdb_prompt $" { pass "bCC tests" }
+	-re "$gdb_prompt $" { fail "bCC tests" }
+	timeout { fail "(timeout) bCC tests" }
+    }
+}
+
+proc bccx_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/14i bCCx_tests\n"
+    gdb_expect {
+	-re "
+.*beqx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bnex	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bgtx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bgex	0x\[0-9a-f]+ <bCCx_tests>.*
+.*blex	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bltx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bhix	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bccx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*blsx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bcsx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bvcx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bvsx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bncx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*bnsx	0x\[0-9a-f]+ <bCCx_tests>.*
+.*$gdb_prompt $" { pass "bCCx tests" }
+	-re "$gdb_prompt $" { fail "bCCx tests" }
+	timeout { fail "(timeout) bCCx tests" }
+    }
+}
+
+proc bit_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4 bit_tests\n"
+    gdb_expect {
+	-re "
+.*btst	64,d1.*
+.*btst	8192,d2.*
+.*bset	d1,\\(a2\\).*
+.*bclr	d1,\\(a2\\).*
+.*$gdb_prompt $" { pass "bit tests" }
+	-re "$gdb_prompt $" { fail "bit tests" }
+	timeout { fail "(timeout) bit tests" }
+    }
+}
+
+proc cmp_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9i cmp_tests\n"
+    gdb_expect {
+	-re "
+.*cmp	d1,d2.*
+.*cmp	d2,a3.*
+.*cmp	a3,d3.*
+.*cmp	a3,a2.*
+.*cmp	16,d3.*
+.*cmp	256,d2.*
+.*cmp	131071,d1.*
+.*cmp	256,a2.*
+.*cmp	131071,a1.*
+.*$gdb_prompt $" { pass "cmp tests" }
+	-re "$gdb_prompt $" { fail "cmp tests" }
+	timeout { fail "(timeout) cmp tests" }
+    }
+}
+
+proc extend_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/5i extend_tests\n"
+    gdb_expect {
+	-re "
+.*ext	d1.*
+.*extx	d2.*
+.*extxu	d3.*
+.*extxb	d2.*
+.*extxbu	d1.*
+.*$gdb_prompt $" { pass "extend tests" }
+	-re "$gdb_prompt $" { fail "extend tests" }
+	timeout { fail "(timeout) extend tests" }
+    }
+}
+
+proc logical_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/11i logical_tests\n"
+    gdb_expect {
+	-re "
+.*and	d1,d2.*
+.*and	127,d2.*
+.*and	32767,d3.*
+.*and	32767,psw.*
+.*or	d1,d2.*
+.*or	127,d2.*
+.*or	32767,d3.*
+.*or	32767,psw.*
+.*xor	d1,d2.*
+.*xor	32767,d3.*
+.*not	d3.*
+.*$gdb_prompt $" { pass "logical tests" }
+	-re "$gdb_prompt $" { fail "logical tests" }
+	timeout { fail "(timeout) logical tests" }
+    }
+}
+
+proc mov_tests_1 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12i mov_tests_1\n"
+    gdb_expect {
+	-re "
+.*mov	d1,a2.*
+.*mov	a2,d1.*
+.*mov	d1,d2.*
+.*mov	a2,a1.*
+.*mov	psw,d3.*
+.*mov	d2,psw.*
+.*mov	mdr,d1.*
+.*mov	d2,mdr.*
+.*mov	\\(a2\\),d1.*
+.*mov	\\(8,a2\\),d1.*
+.*mov	\\(256,a2\\),d1.*
+.*mov	\\(131071,a2\\),d1.*
+.*$gdb_prompt $" { pass "mov1 tests" }
+	-re "$gdb_prompt $" { fail "mov1 tests" }
+	timeout { fail "(timeout) mov1 tests" }
+    }
+}
+
+proc mov_tests_2 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9 mov_tests_2\n"
+    gdb_expect {
+	-re "
+.*mov	\\(d1,a1\\),d2.*
+.*mov	\\(0x8000.*\\),d1.*
+.*mov	\\(0x1ffff.*\\),d1.*
+.*mov	\\(8,a2\\),a1.*
+.*mov	\\(256,a2\\),a1.*
+.*mov	\\(131071,a2\\),a1.*
+.*mov	\\(d1,a1\\),a2.*
+.*mov	\\(0x8000.*\\),a1.*
+.*mov	\\(0x1ffff.*\\),a1.*
+.*$gdb_prompt $" { pass "mov2 tests" }
+	-re "$gdb_prompt $" { fail "mov2 tests" }
+	timeout { fail "(timeout) mov2 tests" }
+    }
+}
+
+proc mov_tests_3 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/10 mov_tests_3\n"
+    gdb_expect {
+	-re "
+.*mov	d1,\\(a2\\).*
+.*mov	d1,\\(32,a2\\).*
+.*mov	d1,\\(256,a2\\).*
+.*mov	d1,\\(131071,a2\\).*
+.*mov	d1,\\(d2,a2\\).*
+.*mov	d1,\\(0x80.*\\).*
+.*mov	d1,\\(0x1ffff.*\\).*
+.*mov	a1,\\(32,a2\\).*
+.*mov	a1,\\(256,a2\\).*
+.*mov	a1,\\(131071,a2\\).*
+.*$gdb_prompt $" { pass "mov3 tests" }
+	-re "$gdb_prompt $" { fail "mov3 tests" }
+	timeout { fail "(timeout) mov3 tests" }
+    }
+}
+
+proc mov_tests_4 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/8 mov_tests_4\n"
+    gdb_expect {
+	-re "
+.*mov	a1,\\(d2,a2\\).*
+.*mov	a1,\\(0x80.*\\).*
+.*mov	a1,\\(0x1ffff.*\\).*
+.*mov	8,d1.*
+.*mov	256,d1.*
+.*mov	131071,d1.*
+.*mov	256,a1.*
+.*mov	131071,a1.*
+.*$gdb_prompt $" { pass "mov4 tests" }
+	-re "$gdb_prompt $" { fail "mov4 tests" }
+	timeout { fail "(timeout) mov4 tests" }
+    }
+}
+
+proc movb_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12 movb_tests\n"
+    gdb_expect {
+	-re "
+.*movb	\\(8,a2\\),d1.*
+.*movb	\\(256,a2\\),d1.*
+.*movb	\\(131071,a2\\),d1.*
+.*movb	\\(d2,a2\\),d3.*
+.*movb	\\(0x1ffff.*\\),d2.*
+.*movb	d1,\\(a2\\).*
+.*movb	d1,\\(8,a2\\).*
+.*movb	d1,\\(256,a2\\).*
+.*movb	d1,\\(131071,a2\\).*
+.*movb	d1,\\(d2,a2\\).*
+.*movb	d1,\\(0x100.*\\).*
+.*movb	d1,\\(0x1ffff.*\\).*
+.*$gdb_prompt $" { pass "movb tests" }
+	-re "$gdb_prompt $" { fail "movb tests" }
+	timeout { fail "(timeout) movb tests" }
+    }
+}
+
+proc movbu_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/7 movbu_tests\n"
+    gdb_expect {
+	-re "
+.*movbu	\\(a2\\),d1.*
+.*movbu	\\(8,a2\\),d1.*
+.*movbu	\\(256,a2\\),d1.*
+.*movbu	\\(131071,a2\\),d1.*
+.*movbu	\\(d1,a1\\),d2.*
+.*movbu	\\(0x8000.*\\),d1.*
+.*movbu	\\(0x1ffff.*\\),d1.*
+.*$gdb_prompt $" { pass "movbu tests" }
+	-re "$gdb_prompt $" { fail "movbu tests" }
+	timeout { fail "(timeout) movbu tests" }
+    }
+}
+
+proc movx_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/6 movx_tests\n"
+    gdb_expect {
+	-re "
+.*movx	\\(8,a2\\),d1.*
+.*movx	\\(256,a2\\),d1.*
+.*movx	\\(131071,a2\\),d1.*
+.*movx	d1,\\(8,a2\\).*
+.*movx	d1,\\(256,a2\\).*
+.*movx	d1,\\(131071,a2\\).*
+.*$gdb_prompt $" { pass "movx tests" }
+	-re "$gdb_prompt $" { fail "movx tests" }
+	timeout { fail "(timeout) movx tests" }
+    }
+}
+
+proc muldiv_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/3 muldiv_tests\n"
+    gdb_expect {
+	-re "
+.*mul	d1,d2.*
+.*mulu	d2,d3.*
+.*divu	d3,d2.*
+.*$gdb_prompt $" { pass "muldiv tests" }
+	-re "$gdb_prompt $" { fail "muldiv tests" }
+	timeout { fail "(timeout) muldiv tests" }
+    }
+}
+
+proc misc_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9 misc_tests\n"
+    gdb_expect {
+	-re "
+.*jmp	0x\[0-9a-f]+ <main>.*
+.*jmp	0x\[0-9a-f]+ <start>.*
+.*jmp	\\(a2\\).*
+.*jsr	0x\[0-9a-f]+ <main>.*
+.*jsr	0x\[0-9a-f]+ <start>.*
+.*jsr	\\(a2\\).*
+.*rts.*
+.*rti.*
+.*nop.*
+.*$gdb_prompt $" { pass "misc tests" }
+	-re "$gdb_prompt $" { fail "misc tests" }
+	timeout { fail "(timeout) misc tests" }
+    }
+}
+
+proc shift_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4i shift_tests\n"
+    gdb_expect {
+	-re "
+.*asr	d2.*
+.*lsr	d3.*
+.*ror	d1.*
+.*rol	d2.*
+.*$gdb_prompt $" { pass "shift tests" }
+	-re "$gdb_prompt $" { fail "shift tests" }
+	timeout { fail "(timeout) shift tests" }
+    }
+}
+
+proc sub_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9i sub_tests\n"
+    gdb_expect {
+	-re "
+.*sub	d1,d2.*
+.*sub	d2,a3.*
+.*sub	a3,d3.*
+.*sub	a3,a2.*
+.*sub	32767,d2.*
+.*sub	131071,d2.*
+.*sub	32767,a2.*
+.*sub	131071,a2.*
+.*subc	d1,d2.*
+.*$gdb_prompt $" { pass "sub tests" }
+	-re "$gdb_prompt $" { fail "sub tests" }
+	timeout { fail "(timeout) sub tests" }
+    }
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+add_tests
+bcc_tests
+bccx_tests
+bit_tests
+cmp_tests
+extend_tests
+logical_tests
+mov_tests_1
+mov_tests_2
+mov_tests_3
+mov_tests_4
+movb_tests
+movbu_tests
+movx_tests
+muldiv_tests
+misc_tests
+shift_tests
+sub_tests
diff --git a/gdb/testsuite/gdb.disasm/mn10200.s b/gdb/testsuite/gdb.disasm/mn10200.s
new file mode 100644
index 0000000..32357b0
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/mn10200.s
@@ -0,0 +1,217 @@
+	.text
+	.global _main
+	.global add_tests
+	.global bCC_tests
+	.global bCCx_tests
+	.global bit_tests
+	.global cmp_tests
+	.global extend_tests
+	.global logical_tests
+	.global mov_tests_1
+	.global mov_tests_2
+	.global mov_tests_3
+	.global mov_tests_4
+	.global movb_tests
+	.global movbu_tests
+	.global movx_tests
+	.global misc_tests
+	.global shift_tests
+	.global sub_tests
+
+_main:
+	nop
+
+add_tests:
+	add d1,d2
+	add d2,a3
+	add a2,d1
+	add a3,a2
+	add 16,d1
+	add 256,d2
+	add 131071,d3
+	add 16,a1
+	add 256,a2
+	add 131071,a3
+	addc d1,d2
+	addnf 16,a2
+
+bCC_tests:
+	beq bCC_tests
+	bne bCC_tests
+	bgt bCC_tests
+	bge bCC_tests
+	ble bCC_tests
+	blt bCC_tests
+	bhi bCC_tests
+	bcc bCC_tests
+	bls bCC_tests	
+	bcs bCC_tests
+	bvc bCC_tests
+	bvs bCC_tests
+	bnc bCC_tests
+	bns bCC_tests
+	bra bCC_tests
+
+bCCx_tests:
+	beqx bCCx_tests
+	bnex bCCx_tests
+	bgtx bCCx_tests
+	bgex bCCx_tests
+	blex bCCx_tests
+	bltx bCCx_tests
+	bhix bCCx_tests
+	bccx bCCx_tests
+	blsx bCCx_tests	
+	bcsx bCCx_tests
+	bvcx bCCx_tests
+	bvsx bCCx_tests
+	bncx bCCx_tests
+	bnsx bCCx_tests
+
+bit_tests:
+	btst 64,d1
+	btst 8192,d2
+	bset d1,(a2)
+	bclr d1,(a2)
+
+cmp_tests:
+	cmp d1,d2
+	cmp d2,a3
+	cmp a3,d3
+	cmp a3,a2
+	cmp 16,d3
+	cmp 256,d2
+	cmp 131071,d1
+	cmp 256,a2
+	cmp 131071,a1
+
+extend_tests:
+	ext d1
+	extx d2
+	extxu d3
+	extxb d2
+	extxbu d1
+	
+logical_tests:
+	and d1,d2
+	and 127,d2
+	and 32767,d3
+	and 32767,psw
+	or d1,d2
+	or 127,d2
+	or 32767,d3
+	or 32767,psw
+	xor d1,d2
+	xor 32767,d3
+	not d3
+
+mov_tests_1:
+	mov d1,a2
+	mov a2,d1
+	mov d1,d2
+	mov a2,a1
+	mov psw,d3
+	mov d2,psw
+	mov mdr,d1
+	mov d2,mdr
+	mov (a2),d1
+	mov (8,a2),d1
+	mov (256,a2),d1
+	mov (131071,a2),d1
+
+mov_tests_2:
+	mov (d1,a1),d2
+	mov (32768),d1
+	mov (131071),d1
+	mov (8,a2),a1
+	mov (256,a2),a1
+	mov (131071,a2),a1
+	mov (d1,a1),a2
+        mov (32768),a1
+        mov (131071),a1
+
+mov_tests_3:
+        mov d1,(a2)
+        mov d1,(32,a2)
+	mov d1,(256,a2)
+	mov d1,(131071,a2)
+	mov d1,(d2,a2)
+	mov d1,(128)
+	mov d1,(131071)
+	mov a1,(32,a2)
+	mov a1,(256,a2)
+	mov a1,(131071,a2)
+
+mov_tests_4:
+	mov a1,(d2,a2)
+	mov a1,(128)
+	mov a1,(131071)
+	mov 8,d1
+	mov 256,d1
+	mov 131071,d1
+	mov 256,a1
+	mov 131071,a1
+
+movb_tests:
+	movb (8,a2),d1
+	movb (256,a2),d1
+	movb (131071,a2),d1
+	movb (d2,a2),d3
+	movb (131071),d2
+	movb d1,(a2)
+	movb d1,(8,a2)
+	movb d1,(256,a2)
+	movb d1,(131071,a2)
+	movb d1,(d2,a2)
+	movb d1,(256)
+	movb d1,(131071)
+
+movbu_tests:
+	movbu (a2),d1
+	movbu (8,a2),d1
+	movbu (256,a2),d1
+	movbu (131071,a2),d1
+	movbu (d1,a1),d2
+	movbu (32768),d1
+	movbu (131071),d1
+
+movx_tests:
+	movx (8,a2),d1
+	movx (256,a2),d1
+	movx (131071,a2),d1
+	movx d1,(8,a2)
+	movx d1,(256,a2)
+	movx d1,(131071,a2)
+
+muldiv_tests:
+	mul d1,d2
+	mulu d2,d3
+	divu d3,d2
+
+misc_tests:
+	jmp _main
+	jmp _start
+	jmp (a2)
+	jsr _main
+	jsr _start
+	jsr (a2)
+	rts
+	rti
+	nop
+
+shift_tests:
+	asr d2
+	lsr d3
+	ror d1
+	rol d2
+
+sub_tests:
+	sub d1,d2
+	sub d2,a3
+	sub a3,d3
+	sub a3,a2
+	sub 32767,d2
+	sub 131071,d2
+	sub 32767,a2
+	sub 131071,a2
+	subc d1,d2
diff --git a/gdb/testsuite/gdb.disasm/mn10300.exp b/gdb/testsuite/gdb.disasm/mn10300.exp
new file mode 100644
index 0000000..b61a2cb
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/mn10300.exp
@@ -0,0 +1,569 @@
+
+# Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if ![istarget "mn10300*-*-*"] {
+    verbose "Tests ignored for all but mn10300 based targets."
+    return
+}
+
+global exec_output
+set prms_id 0
+set bug_id 0
+
+set testfile "mn10300"
+set srcfile ${srcdir}/${subdir}/${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcfile}" "${binfile}" executable ""] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc add_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/14i add_tests\n"
+    gdb_expect {
+	-re "
+.*add	d1,d2.*
+.*add	d2,a3.*
+.*add	a3,a2.*
+.*add	a2,d1.*
+.*add	16,d1.*
+.*add	256,d2.*
+.*add	131071,d3.*
+.*add	16,a1.*
+.*add	256,a2.*
+.*add	131071,a3.*
+.*add	16,sp.*
+.*add	256,sp.*
+.*add	131071,sp.*
+.*addc	d1,d2.*
+.*$gdb_prompt $" { pass "add tests" }
+	-re "$gdb_prompt $" { fail "add tests" }
+	timeout { fail "(timeout) add tests" }
+    }
+}
+
+proc bcc_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/15i bCC_tests\n"
+    gdb_expect {
+	-re "
+.*beq	0x\[0-9a-f]+ <bCC_tests>.*
+.*bne	0x\[0-9a-f]+ <bCC_tests>.*
+.*bgt	0x\[0-9a-f]+ <bCC_tests>.*
+.*bge	0x\[0-9a-f]+ <bCC_tests>.*
+.*ble	0x\[0-9a-f]+ <bCC_tests>.*
+.*blt	0x\[0-9a-f]+ <bCC_tests>.*
+.*bhi	0x\[0-9a-f]+ <bCC_tests>.*
+.*bcc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bls	0x\[0-9a-f]+ <bCC_tests>.*
+.*bcs	0x\[0-9a-f]+ <bCC_tests>.*
+.*bvc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bvs	0x\[0-9a-f]+ <bCC_tests>.*
+.*bnc	0x\[0-9a-f]+ <bCC_tests>.*
+.*bns	0x\[0-9a-f]+ <bCC_tests>.*
+.*bra	0x\[0-9a-f]+ <bCC_tests>.*
+.*$gdb_prompt $" { pass "bCC tests" }
+	-re "$gdb_prompt $" { fail "bCC tests" }
+	timeout { fail "(timeout) bCC tests" }
+    }
+}
+
+proc bit_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/11i bit_tests\n"
+    gdb_expect {
+	-re "
+.*btst	64,d1.*
+.*btst	8192,d2.*
+.*btst	131071,d3.*
+.*btst	64,\\(8,a1\\).*
+.*btst	64,\\(0x1ffff\\).*
+.*bset	d1,\\(a2\\).*
+.*bset	64,\\(8,a1\\).*
+.*bset	64,\\(0x1ffff\\).*
+.*bclr	d1,\\(a2\\).*
+.*bclr	64,\\(8,a1\\).*
+.*bclr	64,\\(0x1ffff\\).*
+.*$gdb_prompt $" { pass "bit tests" }
+	-re "$gdb_prompt $" { fail "bit tests" }
+	timeout { fail "(timeout) bit tests" }
+    }
+}
+
+proc cmp_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/10i cmp_tests\n"
+    gdb_expect {
+	-re "
+.*cmp	d1,d2.*
+.*cmp	d2,a3.*
+.*cmp	a3,d3.*
+.*cmp	a3,a2.*
+.*cmp	16,d3.*
+.*cmp	256,d2.*
+.*cmp	131071,d1.*
+.*cmp	16,a3.*
+.*cmp	256,a2.*
+.*cmp	131071,a1.*
+.*$gdb_prompt $" { pass "cmp tests" }
+	-re "$gdb_prompt $" { fail "cmp tests" }
+	timeout { fail "(timeout) cmp tests" }
+    }
+}
+
+proc extend_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/5i extend_tests\n"
+    gdb_expect {
+	-re "
+.*ext	d1.*
+.*extb	d2.*
+.*extbu	d3.*
+.*exth	d2.*
+.*exthu	d1.*
+.*$gdb_prompt $" { pass "extend tests" }
+	-re "$gdb_prompt $" { fail "extend tests" }
+	timeout { fail "(timeout) extend tests" }
+    }
+}
+
+proc extended_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/13i extended_tests\n"
+    gdb_expect {
+	-re "
+.*putx	d1.*
+.*getx	d2.*
+.*mulq	d1,d2.*
+.*mulq	16,d2.*
+.*mulq	256,d3.*
+.*mulq	131071,d3.*
+.*mulqu	d1,d2.*
+.*mulqu	16,d2.*
+.*mulqu	256,d3.*
+.*mulqu	131071,d3.*
+.*sat16	d2,d3.*
+.*sat24	d3,d2.*
+.*bsch	d1,d2.*
+.*$gdb_prompt $" { pass "extended tests" }
+	-re "$gdb_prompt $" { fail "extended tests" }
+	timeout { fail "(timeout) extended tests" }
+    }
+}
+
+proc logical_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/14i logical_tests\n"
+    gdb_expect {
+	-re "
+.*and	d1,d2.*
+.*and	127,d2.*
+.*and	32767,d3.*
+.*and	131071,d3.*
+.*and	32767,psw.*
+.*or	d1,d2.*
+.*or	127,d2.*
+.*or	32767,d3.*
+.*or	131071,d3.*
+.*or	32767,psw.*
+.*xor	d1,d2.*
+.*xor	32767,d3.*
+.*xor	131071,d3.*
+.*not	d3.*
+.*$gdb_prompt $" { pass "logical tests" }
+	-re "$gdb_prompt $" { fail "logical tests" }
+	timeout { fail "(timeout) logical tests" }
+    }
+}
+
+proc loop_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12i loop_tests\n"
+    gdb_expect {
+	-re "
+.*leq.*
+.*lne.*
+.*lgt.*
+.*lge.*
+.*lle.*
+.*llt.*
+.*lhi.*
+.*lcc.*
+.*lls.*
+.*lcs.*
+.*lra.*
+.*setlb.*
+.*$gdb_prompt $" { pass "loop tests" }
+	-re "$gdb_prompt $" { fail "loop tests" }
+	timeout { fail "(timeout) loop tests" }
+    }
+}
+
+proc mov_tests_1 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/16i mov_tests_1\n"
+    gdb_expect {
+	-re "
+.*mov	d1,d2.*
+.*mov	d1,a2.*
+.*mov	a2,d1.*
+.*mov	a2,a1.*
+.*mov	sp,a2.*
+.*mov	a1,sp.*
+.*mov	d2,psw.*
+.*mov	mdr,d1.*
+.*mov	d2,mdr.*
+.*mov	\\(a2\\),d1.*
+.*mov	\\(8,a2\\),d1.*
+.*mov	\\(256,a2\\),d1.*
+.*mov	\\(131071,a2\\),d1.*
+.*mov	\\(8,sp\\),d1.*
+.*mov	\\(256,sp\\),d1.*
+.*mov	psw,d3.*
+.*$gdb_prompt $" { pass "mov1 tests" }
+	-re "$gdb_prompt $" { fail "mov1 tests" }
+	timeout { fail "(timeout) mov1 tests" }
+    }
+}
+
+proc mov_tests_2 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/15i mov_tests_2\n"
+    gdb_expect {
+	-re "
+.*mov	\\(131071,sp\\),d1.*
+.*mov	\\(d1,a1\\),d2.*
+.*mov	\\(0x8000.*\\),d1.*
+.*mov	\\(0x1ffff.*\\),d1.*
+.*mov	\\(a2\\),a1.*
+.*mov	\\(8,a2\\),a1.*
+.*mov	\\(256,a2\\),a1.*
+.*mov	\\(131071,a2\\),a1.*
+.*mov	\\(8,sp\\),a1.*
+.*mov	\\(256,sp\\),a1.*
+.*mov	\\(131071,sp\\),a1.*
+.*mov	\\(d1,a1\\),a2.*
+.*mov	\\(0x8000.*\\),a1.*
+.*mov	\\(0x1ffff.*\\),a1.*
+.*mov	\\(32,a1\\),sp.*
+.*$gdb_prompt $" { pass "mov2 tests" }
+	-re "$gdb_prompt $" { fail "mov2 tests" }
+	timeout { fail "(timeout) mov2 tests" }
+    }
+}
+
+proc mov_tests_3 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/15i mov_tests_3\n"
+    gdb_expect {
+	-re "
+.*mov	d1,\\(a2\\).*
+.*mov	d1,\\(32,a2\\).*
+.*mov	d1,\\(256,a2\\).*
+.*mov	d1,\\(131071,a2\\).*
+.*mov	d1,\\(32,sp\\).*
+.*mov	d1,\\(32768,sp\\).*
+.*mov	d1,\\(131071,sp\\).*
+.*mov	d1,\\(d2,a2\\).*
+.*mov	d1,\\(0x80.*\\).*
+.*mov	d1,\\(0x1ffff.*\\).*
+.*mov	a1,\\(a2\\).*
+.*mov	a1,\\(32,a2\\).*
+.*mov	a1,\\(256,a2\\).*
+.*mov	a1,\\(131071,a2\\).*
+.*mov	a1,\\(32,sp\\).*
+.*$gdb_prompt $" { pass "mov3 tests" }
+	-re "$gdb_prompt $" { fail "mov3 tests" }
+	timeout { fail "(timeout) mov3 tests" }
+    }
+}
+
+proc mov_tests_4 { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/12i mov_tests_4\n"
+    gdb_expect {
+	-re "
+.*mov	a1,\\(32768,sp\\).*
+.*mov	a1,\\(131071,sp\\).*
+.*mov	a1,\\(d2,a2\\).*
+.*mov	a1,\\(0x80.*\\).*
+.*mov	a1,\\(0x1ffff.*\\).*
+.*mov	sp,\\(32,a1\\).*
+.*mov	8,d1.*
+.*mov	256,d1.*
+.*mov	131071,d1.*
+.*mov	8,a1.*
+.*mov	256,a1.*
+.*mov	131071,a1.*
+.*$gdb_prompt $" { pass "mov4 tests" }
+	-re "$gdb_prompt $" { fail "mov4 tests" }
+	timeout { fail "(timeout) mov4 tests" }
+    }
+}
+
+proc movbu_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/20i movbu_tests\n"
+    gdb_expect {
+	-re "
+.*movbu	\\(a2\\),d1.*
+.*movbu	\\(8,a2\\),d1.*
+.*movbu	\\(256,a2\\),d1.*
+.*movbu	\\(131071,a2\\),d1.*
+.*movbu	\\(8,sp\\),d1.*
+.*movbu	\\(256,sp\\),d1.*
+.*movbu	\\(131071,sp\\),d1.*
+.*movbu	\\(d1,a1\\),d2.*
+.*movbu	\\(0x8000.*\\),d1.*
+.*movbu	\\(0x1ffff.*\\),d1.*
+.*movbu	d1,\\(a2\\).*
+.*movbu	d1,\\(32,a2\\).*
+.*movbu	d1,\\(256,a2\\).*
+.*movbu	d1,\\(131071,a2\\).*
+.*movbu	d1,\\(32,sp\\).*
+.*movbu	d1,\\(32768,sp\\).*
+.*movbu	d1,\\(131071,sp\\).*
+.*movbu	d1,\\(d2,a2\\).*
+.*movbu	d1,\\(0x80.*\\).*
+.*movbu	d1,\\(0x1ffff.*\\).*
+.*$gdb_prompt $" { pass "movbu tests" }
+	-re "$gdb_prompt $" { fail "movbu tests" }
+	timeout { fail "(timeout) movbu tests" }
+    }
+}
+
+proc movhu_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/20i movhu_tests\n"
+    gdb_expect {
+	-re "
+.*movhu	\\(a2\\),d1.*
+.*movhu	\\(8,a2\\),d1.*
+.*movhu	\\(256,a2\\),d1.*
+.*movhu	\\(131071,a2\\),d1.*
+.*movhu	\\(8,sp\\),d1.*
+.*movhu	\\(256,sp\\),d1.*
+.*movhu	\\(131071,sp\\),d1.*
+.*movhu	\\(d1,a1\\),d2.*
+.*movhu	\\(0x8000.*\\),d1.*
+.*movhu	\\(0x1ffff.*\\),d1.*
+.*movhu	d1,\\(a2\\).*
+.*movhu	d1,\\(32,a2\\).*
+.*movhu	d1,\\(256,a2\\).*
+.*movhu	d1,\\(131071,a2\\).*
+.*movhu	d1,\\(32,sp\\).*
+.*movhu	d1,\\(32768,sp\\).*
+.*movhu	d1,\\(131071,sp\\).*
+.*movhu	d1,\\(d2,a2\\).*
+.*movhu	d1,\\(0x80.*\\).*
+.*movhu	d1,\\(0x1ffff.*\\).*
+.*$gdb_prompt $" { pass "movhu tests" }
+	-re "$gdb_prompt $" { fail "movhu tests" }
+	timeout { fail "(timeout) movhu tests" }
+    }
+}
+
+proc movm_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4i movm_tests\n"
+    gdb_expect {
+	-re "
+.*movm	\\(sp\\),.a2,a3..*
+.*movm	\\(sp\\),.d2,d3,a2,a3,other..*
+.*movm	.a2,a3.,\\(sp\\).*
+.*movm	.d2,d3,a2,a3,other.,\\(sp\\).*
+.*$gdb_prompt $" { pass "movm tests" }
+	-re "$gdb_prompt $" { fail "movm tests" }
+	timeout { fail "(timeout) movm tests" }
+    }
+}
+
+proc muldiv_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/4i muldiv_tests\n"
+    gdb_expect {
+	-re "
+.*mul	d1,d2.*
+.*mulu	d2,d3.*
+.*div	d3,d3.*
+.*divu	d3,d2.*
+.*$gdb_prompt $" { pass "muldiv tests" }
+	-re "$gdb_prompt $" { fail "muldiv tests" }
+	timeout { fail "(timeout) muldiv tests" }
+    }
+}
+
+proc other_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/19i other_tests\n"
+    gdb_expect {
+	-re "
+.*clr	d2.*
+.*inc	d1.*
+.*inc	a2.*
+.*inc4	a3.*
+.*jmp	\\(a2\\).*
+.*jmp	0x\[0-9a-f]+ <main>.*
+.*jmp	0x\[0-9a-f]+ <start>.*
+.*call	0x\[0-9a-f]+ <main>,.a2,a3.,9.*
+.*call	0x\[0-9a-f]+ <start>,.a2,a3.,32.*
+.*calls	\\(a2\\).*
+.*calls	0x\[0-9a-f]+ <main>.*
+.*calls	0x\[0-9a-f]+ <start>.*
+.*ret	.a2,a3.,7.*
+.*retf	.a2,a3.,5.*
+.*rets.*
+.*rti.*
+.*trap.*
+.*nop.*
+.*rtm.*
+.*$gdb_prompt $" { pass "other tests" }
+	-re "$gdb_prompt $" { fail "other tests" }
+	timeout { fail "(timeout) other tests" }
+    }
+}
+
+proc shift_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9i shift_tests\n"
+    gdb_expect {
+	-re "
+.*asr	d1,d2.*
+.*asr	4,d2.*
+.*lsr	d2,d3.*
+.*lsr	4,d3.*
+.*asl	d3,d2.*
+.*asl	4,d2.*
+.*asl2	d2.*
+.*ror	d1.*
+.*rol	d2.*
+.*$gdb_prompt $" { pass "shift tests" }
+	-re "$gdb_prompt $" { fail "shift tests" }
+	timeout { fail "(timeout) shift tests" }
+    }
+}
+
+proc sub_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/7i sub_tests\n"
+    gdb_expect {
+	-re "
+.*sub	d1,d2.*
+.*sub	d2,a3.*
+.*sub	a3,d3.*
+.*sub	a3,a2.*
+.*sub	131071,d2.*
+.*sub	131071,a1.*
+.*subc	d1,d2.*
+.*$gdb_prompt $" { pass "sub tests" }
+	-re "$gdb_prompt $" { fail "sub tests" }
+	timeout { fail "(timeout) sub tests" }
+    }
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+add_tests
+bcc_tests
+bit_tests
+cmp_tests
+extend_tests
+extended_tests
+logical_tests
+loop_tests
+mov_tests_1
+mov_tests_2
+mov_tests_3
+mov_tests_4
+movbu_tests
+movhu_tests
+movm_tests
+muldiv_tests
+other_tests
+shift_tests
+sub_tests
diff --git a/gdb/testsuite/gdb.disasm/mn10300.s b/gdb/testsuite/gdb.disasm/mn10300.s
new file mode 100644
index 0000000..3ad6c95
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/mn10300.s
@@ -0,0 +1,300 @@
+	.text
+	.global _main
+	.global add_tests
+	.global bCC_tests
+	.global bit_tests
+	.global cmp_tests
+	.global extend_tests
+	.global extended_tests
+	.global logical_tests
+	.global loop_tests
+	.global mov_tests_1
+	.global mov_tests_2
+	.global mov_tests_3
+	.global mov_tests_4
+	.global movbu_tests
+	.global movhu_tests
+	.global movm_tests
+	.global muldiv_tests
+	.global other_tests
+	.global shift_tests
+	.global sub_tests
+
+_main:
+	nop
+
+add_tests:
+	add d1,d2
+	add d2,a3
+	add a3,a2
+	add a2,d1
+	add 16,d1
+	add 256,d2
+	add 131071,d3
+	add 16,a1
+	add 256,a2
+	add 131071,a3
+	add 16,sp
+	add 256,sp
+	add 131071,sp
+	addc d1,d2
+
+bCC_tests:
+	beq bCC_tests
+	bne bCC_tests
+	bgt bCC_tests
+	bge bCC_tests
+	ble bCC_tests
+	blt bCC_tests
+	bhi bCC_tests
+	bcc bCC_tests
+	bls bCC_tests	
+	bcs bCC_tests
+	bvc bCC_tests
+	bvs bCC_tests
+	bnc bCC_tests
+	bns bCC_tests
+	bra bCC_tests
+
+bit_tests:
+	btst 64,d1
+	btst 8192,d2
+	btst 131071,d3
+	btst 64,(8,a1)
+	btst 64,(0x1ffff)
+	bset d1,(a2)
+	bset 64,(8,a1)
+	bset 64,(0x1ffff)
+	bclr d1,(a2)
+	bclr 64,(8,a1)
+	bclr 64,(0x1ffff)
+
+cmp_tests:
+	cmp d1,d2
+	cmp d2,a3
+	cmp a3,d3
+	cmp a3,a2
+	cmp 16,d3
+	cmp 256,d2
+	cmp 131071,d1
+	cmp 16,a3
+	cmp 256,a2
+	cmp 131071,a1
+
+	
+extend_tests:
+	ext d1
+	extb d2
+	extbu d3
+	exth d2
+	exthu d1
+
+extended_tests:
+	putx d1
+	getx d2
+	mulq d1,d2
+	mulq 16,d2
+	mulq 256,d3
+	mulq 131071,d3
+	mulqu d1,d2
+	mulqu 16,d2
+	mulqu 256,d3
+	mulqu 131071,d3
+	sat16 d2,d3
+	sat24 d3,d2
+	bsch d1,d2
+	
+logical_tests:
+	and d1,d2
+	and 127,d2
+	and 32767,d3
+	and 131071,d3
+	and 32767,psw
+	or d1,d2
+	or 127,d2
+	or 32767,d3
+	or 131071,d3
+	or 32767,psw
+	xor d1,d2
+	xor 32767,d3
+	xor 131071,d3
+	not d3
+
+loop_tests:
+	leq
+	lne
+	lgt
+	lge
+	lle
+	llt
+	lhi
+	lcc
+	lls	
+	lcs
+	lra
+	setlb
+
+mov_tests_1:
+	mov d1,d2
+	mov d1,a2
+	mov a2,d1
+	mov a2,a1
+	mov sp,a2
+	mov a1,sp
+	mov d2,psw
+	mov mdr,d1
+	mov d2,mdr
+	mov (a2),d1
+	mov (8,a2),d1
+	mov (256,a2),d1
+	mov (131071,a2),d1
+	mov (8,sp),d1
+	mov (256,sp),d1
+	mov psw,d3
+
+mov_tests_2:
+        mov (131071,sp),d1
+	mov (d1,a1),d2
+	mov (32768),d1
+	mov (131071),d1
+	mov (a2),a1
+	mov (8,a2),a1
+	mov (256,a2),a1
+	mov (131071,a2),a1
+	mov (8,sp),a1
+	mov (256,sp),a1
+	mov (131071,sp),a1
+	mov (d1,a1),a2
+        mov (32768),a1
+        mov (131071),a1
+        mov (32,a1),sp
+
+mov_tests_3:
+        mov d1,(a2)
+        mov d1,(32,a2)
+	mov d1,(256,a2)
+	mov d1,(131071,a2)
+	mov d1,(32,sp)
+	mov d1,(32768,sp)
+	mov d1,(131071,sp)
+	mov d1,(d2,a2)
+	mov d1,(128)
+	mov d1,(131071)
+	mov a1,(a2)
+	mov a1,(32,a2)
+	mov a1,(256,a2)
+	mov a1,(131071,a2)
+	mov a1,(32,sp)
+
+mov_tests_4:
+	mov a1,(32768,sp)
+	mov a1,(131071,sp)
+	mov a1,(d2,a2)
+	mov a1,(128)
+	mov a1,(131071)
+	mov sp,(32,a1)
+	mov 8,d1
+	mov 256,d1
+	mov 131071,d1
+	mov 8,a1
+	mov 256,a1
+	mov 131071,a1
+
+movbu_tests:
+	movbu (a2),d1
+	movbu (8,a2),d1
+	movbu (256,a2),d1
+	movbu (131071,a2),d1
+	movbu (8,sp),d1
+	movbu (256,sp),d1
+	movbu (131071,sp),d1
+	movbu (d1,a1),d2
+	movbu (32768),d1
+	movbu (131071),d1
+	movbu d1,(a2)
+	movbu d1,(32,a2)
+	movbu d1,(256,a2)
+	movbu d1,(131071,a2)
+	movbu d1,(32,sp)
+	movbu d1,(32768,sp)
+	movbu d1,(131071,sp)
+	movbu d1,(d2,a2)
+	movbu d1,(128)
+	movbu d1,(131071)
+
+movhu_tests:
+	movhu (a2),d1
+	movhu (8,a2),d1
+	movhu (256,a2),d1
+	movhu (131071,a2),d1
+	movhu (8,sp),d1
+	movhu (256,sp),d1
+	movhu (131071,sp),d1
+	movhu (d1,a1),d2
+	movhu (32768),d1
+	movhu (131071),d1
+	movhu d1,(a2)
+	movhu d1,(32,a2)
+	movhu d1,(256,a2)
+	movhu d1,(131071,a2)
+	movhu d1,(32,sp)
+	movhu d1,(32768,sp)
+	movhu d1,(131071,sp)
+	movhu d1,(d2,a2)
+	movhu d1,(128)
+	movhu d1,(131071)
+
+movm_tests:
+	movm (sp),[a2,a3]
+	movm (sp),[d2,d3,a2,a3,other]
+	movm [a2,a3],(sp)
+	movm [d2,d3,a2,a3,other],(sp)
+
+
+muldiv_tests:
+	mul d1,d2
+	mulu d2,d3
+	div d3,d3
+	divu d3,d2
+
+other_tests:
+	clr d2
+	inc d1
+	inc a2
+	inc4 a3
+	jmp (a2)
+	jmp _main
+	jmp _start
+	call _main,[a2,a3],9
+	call _start,[a2,a3],32
+	calls (a2)
+	calls _main
+	calls _start
+	ret [a2,a3],7
+	retf [a2,a3],5
+	rets
+	rti
+	trap
+	nop
+	rtm
+
+shift_tests:
+	asr d1,d2
+	asr 4,d2
+	lsr d2,d3
+	lsr 4,d3
+	asl d3,d2
+	asl 4,d2
+	asl2 d2
+	ror d1
+	rol d2
+
+sub_tests:
+	sub d1,d2
+	sub d2,a3
+	sub a3,d3
+	sub a3,a2
+	sub 131071,d2
+	sub 131071,a1
+	subc d1,d2
+
diff --git a/gdb/testsuite/gdb.disasm/sh3.exp b/gdb/testsuite/gdb.disasm/sh3.exp
new file mode 100644
index 0000000..6c82f91
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/sh3.exp
@@ -0,0 +1,123 @@
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cs.utah.edu)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+if ![istarget "sh3*-*-*"] {
+    verbose "Tests ignored for all but sh3 based targets."
+    return
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "sh3"
+set srcfile ${srcdir}/${subdir}/${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcfile}" "${binfile}" executable ""] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+proc all_fp_move_and_load_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/9i fp_move_and_load_tests\n"
+    gdb_expect {
+	-re "
+.*fmov.s\t@r0,fr0.*
+.*fmov.s\tfr0,@r0.*
+.*fmov.s\t@r0\\+,fr0.*
+.*fmov.s\tfr0,@-r0.*
+.*fmov.s\t@\\(r0,r0\\),fr0.*
+.*fmov.s\tfr0,@\\(r0,r0\\).*
+.*fmov\tfr0,fr1.*
+.*fldi0\tfr0.*
+.*fldi1\tfr0.*
+.*$gdb_prompt $" { pass "fp_move_and_load_tests" }
+	-re "$gdb_prompt $" { fail "fp_move_and_load_tests" }
+	timeout { fail "(timeout) fp_move_and_load_tests" }
+    }
+}
+
+proc all_fp_arithmetic_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/13i fp_arithmetic_tests\n"
+    gdb_expect {
+	-re "
+.*fadd\tfr0,fr1.*
+.*fsub\tfr0,fr1.*
+.*fmul\tfr0,fr1.*
+.*fdiv\tfr0,fr1.*
+.*fmac\tfr0,fr0,fr1.*
+.*fcmp/eq\tfr0,fr1.*
+.*fcmp/gt\tfr0,fr1.*
+.*ftst/nan\tfr0.*
+.*fneg\tfr0.*
+.*fabs\tfr0.*
+.*fsqrt\tfr0.*
+.*float\tfpul,fr0.*
+.*ftrc\tfr0,fpul.*
+.*$gdb_prompt $" { pass "fp_arithmetic_tests" }
+	-re "$gdb_prompt $" { fail "fp_arithmetic_tests" }
+	timeout { fail "(timeout) fp_arithmetic_tests" }
+    }
+}
+
+proc all_fp_misc_tests { } {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    send_gdb "x/10i fp_misc_tests\n"
+    gdb_expect {
+	-re "
+.*fsts\tfpul,fr0.*
+.*flds\tfr0,fpul.*
+.*lds\tr3,fpul.*
+.*lds\\.l\t@r3\\+,fpul.*
+.*lds\tr3,fpscr.*
+.*lds\\.l\t@r3\\+,fpscr.*
+.*sts\tfpul,r3.*
+.*sts\\.l\tfpul,@-r3.*
+.*sts\tfpscr,r3.*
+.*sts\\.l\tfpscr,@-r3.*
+.*$gdb_prompt $" { pass "fp_misc_tests" }
+	-re "$gdb_prompt $" { fail "fp_misc_tests" }
+	timeout { fail "(timeout) fp_misc_tests" }
+    }
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+all_fp_move_and_load_tests
+all_fp_arithmetic_tests
+all_fp_misc_tests
+
diff --git a/gdb/testsuite/gdb.disasm/sh3.s b/gdb/testsuite/gdb.disasm/sh3.s
new file mode 100644
index 0000000..8bab256
--- /dev/null
+++ b/gdb/testsuite/gdb.disasm/sh3.s
@@ -0,0 +1,54 @@
+	.file	"test.c"
+	.data
+
+! Hitachi SH cc1 (cygnus-2.7.1-950728) arguments: -O -fpeephole
+! -ffunction-cse -freg-struct-return -fdelayed-branch -fcommon -fgnu-linker
+
+gcc2_compiled.:
+___gnu_compiled_c:
+	.text
+	.align 2
+	.global	_fp_move_and_load_tests
+	.global	_fp_arithmetic_tests
+	.global _fp_misc_tests
+	.global _main
+
+_main:
+_fp_move_and_load_tests:
+	fmov.s	@r0,fr0
+	fmov.s	fr0,@r0
+	fmov.s	@r0+,fr0
+	fmov.s	fr0,@-r0
+	fmov.s	@(r0,r0),fr0
+	fmov.s	fr0,@(r0,r0)
+	fmov	fr0,fr1
+	fldi0	fr0
+	fldi1	fr0
+
+_fp_arithmetic_tests:
+	fadd	fr0,fr1
+	fsub	fr0,fr1
+	fmul	fr0,fr1
+	fdiv	fr0,fr1
+	fmac	fr0,fr0,fr1
+	fcmp/eq	fr0,fr1
+	fcmp/gt	fr0,fr1
+	ftst/nan	fr0
+	fneg	fr0
+	fabs	fr0
+	fsqrt	fr0
+	float	fpul,fr0
+	ftrc	fr0,fpul
+
+_fp_misc_tests:
+	fsts	fpul,fr0
+	flds	fr0,fpul
+	lds	r3,fpul
+	lds.l	@r3+,fpul
+	lds	r3,fpscr
+	lds.l	@r3+,fpscr
+	sts	fpul,r3
+	sts.l	fpul,@-r3
+	sts	fpscr,r3
+	sts.l	fpscr,@-r3
+
diff --git a/gdb/testsuite/gdb.fortran/exprs.exp b/gdb/testsuite/gdb.fortran/exprs.exp
new file mode 100644
index 0000000..cccc82a
--- /dev/null
+++ b/gdb/testsuite/gdb.fortran/exprs.exp
@@ -0,0 +1,273 @@
+# Copyright (C) 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was adapted from Chill tests by Stan Shebs (shebs@cygnus.com).
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# Set the current language to fortran.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_fortran {} {
+    global gdb_prompt
+    
+    if [gdb_test "set language fortran" ""] {
+	return 0;
+    }
+
+    if ![gdb_test "show language" ".* source language is \"fortran\".*"] {
+	return 1;
+    } else {
+	return 0;
+    }
+}
+
+proc test_integer_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various decimal values.
+
+    gdb_test "p 123" " = 123"
+    gdb_test "p -123" " = -123"
+}
+
+proc test_character_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various character values.
+
+    gdb_test "p 'a'" " = 'a'"
+}
+
+proc test_integer_literals_rejected {} {
+    global gdb_prompt
+
+    test_print_reject "p _"
+}
+
+proc test_logical_literals_accepted {} {
+    global gdb_prompt
+
+    # Test the only possible values for a logical, TRUE and FALSE.
+
+    gdb_test "p .TRUE." " = .TRUE."
+    gdb_test "p .FALSE." " = .FALSE."
+}
+
+proc test_float_literals_accepted {} {
+    global gdb_prompt
+
+    # Test various floating point formats
+
+    gdb_test "p .44 .LT. .45" " = .TRUE."
+    gdb_test "p .44 .GT. .45" " = .FALSE."
+    gdb_test "p 0.44 .LT. 0.45" " = .TRUE."
+    gdb_test "p 0.44 .GT. 0.45" " = .FALSE."
+    gdb_test "p 44. .LT. 45." " = .TRUE."
+    gdb_test "p 44. .GT. 45." " = .FALSE."
+    gdb_test "p 44.0 .LT. 45.0" " = .TRUE."
+    gdb_test "p 44.0 .GT. 45.0" " = .FALSE."
+    gdb_test "p 10D20 .LT. 10D21" " = .TRUE."
+    gdb_test "p 10D20 .GT. 10D21" " = .FALSE."
+    gdb_test "p 10d20 .LT. 10d21" " = .TRUE."
+    gdb_test "p 10d20 .GT. 10d21" " = .FALSE."
+    gdb_test "p 10E20 .LT. 10E21" " = .TRUE."
+    gdb_test "p 10E20 .GT. 10E21" " = .FALSE."
+    gdb_test "p 10e20 .LT. 10e21" " = .TRUE."
+    gdb_test "p 10e20 .GT. 10e21" " = .FALSE."
+    gdb_test "p 10.D20 .LT. 10.D21" " = .TRUE."
+    gdb_test "p 10.D20 .GT. 10.D21" " = .FALSE."
+    gdb_test "p 10.d20 .LT. 10.d21" " = .TRUE."
+    gdb_test "p 10.d20 .GT. 10.d21" " = .FALSE."
+    gdb_test "p 10.E20 .LT. 10.E21" " = .TRUE."
+    gdb_test "p 10.E20 .GT. 10.E21" " = .FALSE."
+    gdb_test "p 10.e20 .LT. 10.e21" " = .TRUE."
+    gdb_test "p 10.e20 .GT. 10.e21" " = .FALSE."
+    gdb_test "p 10.0D20 .LT. 10.0D21" " = .TRUE."
+    gdb_test "p 10.0D20 .GT. 10.0D21" " = .FALSE."
+    gdb_test "p 10.0d20 .LT. 10.0d21" " = .TRUE."
+    gdb_test "p 10.0d20 .GT. 10.0d21" " = .FALSE."
+    gdb_test "p 10.0E20 .LT. 10.0E21" " = .TRUE."
+    gdb_test "p 10.0E20 .GT. 10.0E21" " = .FALSE."
+    gdb_test "p 10.0e20 .LT. 10.0e21" " = .TRUE."
+    gdb_test "p 10.0e20 .GT. 10.0e21" " = .FALSE."
+    gdb_test "p 10.0D+20 .LT. 10.0D+21" " = .TRUE."
+    gdb_test "p 10.0D+20 .GT. 10.0D+21" " = .FALSE."
+    gdb_test "p 10.0d+20 .LT. 10.0d+21" " = .TRUE."
+    gdb_test "p 10.0d+20 .GT. 10.0d+21" " = .FALSE."
+    gdb_test "p 10.0E+20 .LT. 10.0E+21" " = .TRUE."
+    gdb_test "p 10.0E+20 .GT. 10.0E+21" " = .FALSE."
+    gdb_test "p 10.0e+20 .LT. 10.0e+21" " = .TRUE."
+    gdb_test "p 10.0e+20 .GT. 10.0e+21" " = .FALSE."
+    gdb_test "p 10.0D-11 .LT. 10.0D-10" " = .TRUE."
+    gdb_test "p 10.0D-11 .GT. 10.0D-10" " = .FALSE."
+    gdb_test "p 10.0d-11 .LT. 10.0d-10" " = .TRUE."
+    gdb_test "p 10.0d-11 .GT. 10.0d-10" " = .FALSE."
+    gdb_test "p 10.0E-11 .LT. 10.0E-10" " = .TRUE."
+    gdb_test "p 10.0E-11 .GT. 10.0E-10" " = .FALSE."
+    gdb_test "p 10.0e-11 .LT. 10.0e-10" " = .TRUE."
+    gdb_test "p 10.0e-11 .GT. 10.0e-10" " = .FALSE."
+}
+
+proc test_convenience_variables {} {
+    global gdb_prompt
+
+    gdb_test "set \$foo = 101"	" = 101\[\r\n\]*" \
+	"Set a new convenience variable"
+
+    gdb_test "print \$foo"		" = 101" \
+	"Print contents of new convenience variable"
+
+    gdb_test "set \$foo = 301"	" = 301\[\r\n\]*" \
+	"Set convenience variable to a new value"
+
+    gdb_test "print \$foo"		" = 301" \
+	"Print new contents of convenience variable"
+
+    gdb_test "set \$_ = 11"		" = 11\[\r\n\]*" \
+	"Set convenience variable \$_"
+
+    gdb_test "print \$_"		" = 11" \
+	"Print contents of convenience variable \$_"
+
+    gdb_test "print \$foo + 10"	" = 311" \
+	"Use convenience variable in arithmetic expression"
+
+    gdb_test "print (\$foo = 32) + 4"	" = 36" \
+	"Use convenience variable assignment in arithmetic expression"
+
+    gdb_test "print \$bar"		" = VOID" \
+	"Print contents of uninitialized convenience variable"
+}
+
+proc test_value_history {} {
+    global gdb_prompt
+
+    gdb_test "print 101"	"\\\$1 = 101" \
+	"Set value-history\[1\] using \$1"
+
+    gdb_test "print 102" 	"\\\$2 = 102" \
+	"Set value-history\[2\] using \$2"
+
+    gdb_test "print 103"	"\\\$3 = 103" \
+	"Set value-history\[3\] using \$3"
+
+    gdb_test "print \$\$"	"\\\$4 = 102" \
+	"Print value-history\[MAX-1\] using inplicit index \$\$"
+
+    gdb_test "print \$\$"	"\\\$5 = 103" \
+	"Print value-history\[MAX-1\] again using implicit index \$\$"
+
+    gdb_test "print \$"	"\\\$6 = 103" \
+	"Print value-history\[MAX\] using implicit index \$"
+
+    gdb_test "print \$\$2"	"\\\$7 = 102" \
+	"Print value-history\[MAX-2\] using explicit index \$\$2"
+
+    gdb_test "print \$0"	"\\\$8 = 102" \
+	"Print value-history\[MAX\] using explicit index \$0"
+
+    gdb_test "print 108"	"\\\$9 = 108" ""
+
+    gdb_test "print \$\$0"	"\\\$10 = 108" \
+	"Print value-history\[MAX\] using explicit index \$\$0"
+
+    gdb_test "print \$1"	"\\\$11 = 101" \
+	"Print value-history\[1\] using explicit index \$1"
+
+    gdb_test "print \$2"	"\\\$12 = 102" \
+	"Print value-history\[2\] using explicit index \$2"
+
+    gdb_test "print \$3"	"\\\$13 = 103" \
+	"Print value-history\[3\] using explicit index \$3"
+
+    gdb_test "print \$-3"	"\\\$14 = 100" \
+	"Print (value-history\[MAX\] - 3) using implicit index \$"
+
+    gdb_test "print \$1 + 3"	"\\\$15 = 104" \
+	"Use value-history element in arithmetic expression"
+}
+
+proc test_arithmetic_expressions {} {
+    global gdb_prompt
+
+    # Test unary minus with various operands
+
+#    gdb_test "p -(TRUE)"	" = -1"	"unary minus applied to bool"
+#    gdb_test "p -('a')"	" = xxx"	"unary minus applied to char"
+    gdb_test "p -(1)"		" = -1"	"unary minus applied to int"
+    gdb_test "p -(1.0)"	" = -1"	"unary minus applied to real"
+
+    # Test addition with various operands
+
+    gdb_test "p .TRUE. + 1"	" = 2"	"bool plus int"
+    gdb_test "p 1 + 1"		" = 2"	"int plus int"
+    gdb_test "p 1.0 + 1"	" = 2"	"real plus int"
+    gdb_test "p 1.0 + 2.0"	" = 3"	"real plus real"
+
+    # Test subtraction with various operands
+
+    gdb_test "p .TRUE. - 1"	" = 0"	"bool minus int"
+    gdb_test "p 3 - 1"		" = 2"	"int minus int"
+    gdb_test "p 3.0 - 1"	" = 2"	"real minus int"
+    gdb_test "p 5.0 - 2.0"	" = 3"	"real minus real"
+
+    # Test multiplication with various operands
+
+    gdb_test "p .TRUE. * 1"	" = 1"	"bool times int"
+    gdb_test "p 2 * 3"		" = 6"	"int times int"
+    gdb_test "p 2.0 * 3"	" = 6"	"real times int"
+    gdb_test "p 2.0 * 3.0"	" = 6"	"real times real"
+
+    # Test division with various operands
+
+    gdb_test "p .TRUE. / 1"	" = 1"	"bool divided by int"
+    gdb_test "p 6 / 3"		" = 2"	"int divided by int"
+    gdb_test "p 6.0 / 3"	" = 2"	"real divided by int"
+    gdb_test "p 6.0 / 3.0"	" = 2"	"real divided by real"
+
+    # Test modulo with various operands
+
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ""
+
+if [set_lang_fortran] then {
+    test_value_history
+    test_convenience_variables
+    test_integer_literals_accepted
+    test_integer_literals_rejected
+    test_logical_literals_accepted
+    test_character_literals_accepted
+    test_float_literals_accepted
+    test_arithmetic_expressions
+} else {
+    warning "$test_name tests suppressed." 0
+}
diff --git a/gdb/testsuite/gdb.fortran/types.exp b/gdb/testsuite/gdb.fortran/types.exp
new file mode 100644
index 0000000..6f99a29
--- /dev/null
+++ b/gdb/testsuite/gdb.fortran/types.exp
@@ -0,0 +1,114 @@
+# Copyright (C) 1994, 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was adapted from Chill tests by Stan Shebs (shebs@cygnus.com).
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# Set the current language to fortran.  This counts as a test.  If it
+# fails, then we skip the other tests.
+
+proc set_lang_fortran {} {
+    global gdb_prompt
+    
+    if [gdb_test "set language fortran" ""] {
+	return 0;
+    }
+
+    if ![gdb_test "show language" ".* source language is \"fortran\".*"] {
+	return 1;
+    } else {
+	return 0;
+    }
+}
+
+proc test_integer_literal_types_accepted {} {
+    global gdb_prompt
+
+    # Test various decimal values.
+    # Should be integer*4 probably.
+    gdb_test "pt 123" "type = int" 
+}
+
+proc test_character_literal_types_accepted {} {
+    global gdb_prompt
+
+    # Test various character values.
+
+    gdb_test "pt 'a'" "type = character\\*1"
+}
+
+proc test_integer_literal_types_rejected {} {
+    global gdb_prompt
+
+    test_print_reject "pt _"
+}
+
+proc test_logical_literal_types_accepted {} {
+    global gdb_prompt
+
+    # Test the only possible values for a logical, TRUE and FALSE.
+
+    gdb_test "pt .TRUE." "type = logical\\*2"
+    gdb_test "pt .FALSE." "type = logical\\*2"
+}
+
+proc test_float_literal_types_accepted {} {
+    global gdb_prompt
+
+    # Test various floating point formats
+
+    # this used to guess whether to look for "real*4" or
+    # "real*8" based on a target config variable, but noone
+    # maintained it properly.
+
+    gdb_test "pt .44" "type = real\\*\[0-9\]+"
+    gdb_test "pt 44.0" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10D20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10D20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10d20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10d20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10E20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10E20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10e20" "type = real\\*\[0-9\]+"
+    gdb_test "pt 10e20" "type = real\\*\[0-9\]+"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_test "set print sevenbit-strings" ""
+
+if [set_lang_fortran] then {
+    test_integer_literal_types_accepted
+    test_integer_literal_types_rejected
+    test_logical_literal_types_accepted
+    test_character_literal_types_accepted
+    test_float_literal_types_accepted
+} else {
+    warning "$test_name tests suppressed." 0
+}
diff --git a/gdb/testsuite/gdb.hp/Makefile.in b/gdb/testsuite/gdb.hp/Makefile.in
new file mode 100644
index 0000000..d65fc75
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/Makefile.in
@@ -0,0 +1,25 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+PROGS = ambiguous ctti-add exception gen-so-thresh namespace \
+	optimize pxdb so-thresh templ-hp watch-hp xdb 
+
+MISCELLANEOUS = \
+	lib00-so-thresh.c lib00-so-thresh.sl \
+	lib01-so-thresh.c lib01-so-thresh.sl \
+	lib02-so-thresh.c lib02-so-thresh.sl \
+	so-thresh.c so-thresh.linkopts
+
+all: 
+	@echo "Nothing to be done for all..."
+
+#### host, target, and site specific Makefile frags come in here.
+
+clean mostlyclean:
+	-rm -f *.ci *.o $(OBJS) $(PROGS) $(MISCELLANEOUS) *~ core
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.hp/ambiguous.cc b/gdb/testsuite/gdb.hp/ambiguous.cc
new file mode 100644
index 0000000..6ee7bc1
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ambiguous.cc
@@ -0,0 +1,110 @@
+
+void marker1()
+{
+  return;
+}
+
+class A1 {
+public:
+  int x;
+  int y;
+};
+
+class A2 {
+public:
+  int x;
+  int y;
+};
+
+class A3 {
+public:
+  int x;
+  int y;
+};
+
+class X : public A1, public A2 {
+public:
+  int z;
+};
+
+class L : public A1 {
+public:
+  int z;
+};
+
+class LV : public virtual A1 {
+public:
+  int z;
+};
+
+class M : public A2 {
+public:
+  int w;
+};
+
+class N : public L, public M {
+public:
+  int r;
+};
+
+class K : public A1 {
+public:
+  int i;
+};
+
+class KV : public virtual A1 {
+public:
+  int i;
+};
+
+class J : public K, public L {
+public:
+  int j;
+};
+
+class JV : public KV, public LV {
+public:
+  int jv;
+};
+
+class JVA1 : public KV, public LV, public A1 {
+public:
+  int jva1;
+};
+
+class JVA2 : public KV, public LV, public A2 {
+public:
+  int jva2;
+};
+
+class JVA1V : public KV, public LV, public virtual A1 {
+public:
+  int jva1v;
+};
+
+int main()
+{
+  A1 a1;
+  A2 a2;
+  A3 a3;
+  X x;
+  L l;
+  M m;
+  N n;
+  K k;
+  J j;
+  JV jv;
+  JVA1 jva1;
+  JVA2 jva2;
+  JVA1V jva1v;
+  
+  int i;
+
+  i += k.i + m.w + a1.x + a2.x + a3.x + x.z + l.z + n.r + j.j;
+
+  marker1();
+  
+}
+
+
+  
diff --git a/gdb/testsuite/gdb.hp/ambiguous.exp b/gdb/testsuite/gdb.hp/ambiguous.exp
new file mode 100644
index 0000000..5b87af3
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ambiguous.exp
@@ -0,0 +1,216 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file is part of the gdb testsuite
+
+# tests relating to ambiguous class members
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-28
+
+# This file is part of the gdb testsuite
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+#
+# test running programs
+#
+
+set prms_id 0
+set bug_id 0
+
+set testfile "ambiguous"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" { pass "up from marker1" }
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+# print out various class objects' members.  The values aren't
+# important, just check that the warning is emitted at the
+# right times. 
+
+# X is derived from A1 and A2; both A1 and A2 have a member 'x'
+send_gdb "print x.x\n"
+gdb_expect {
+   -re "warning: x ambiguous; using X::A1::x. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       pass "print x.x"
+   }
+   -re ".*$gdb_prompt $" { fail "print x.x" }
+   timeout { fail "(timeout) print x.x" }
+}
+
+
+# N is derived from A1 and A2, but not immediately -- two steps
+# up in the hierarchy. Both A1 and A2 have a member 'x'.
+send_gdb "print n.x\n"
+gdb_expect {
+   -re "warning: x ambiguous; using N::L::A1::x. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       pass "print n.x"
+   }
+   -re ".*$gdb_prompt $" { fail "print n.x" }
+   timeout { fail "(timeout) print n.x" }
+}
+
+# J is derived from A1 twice.  A1 has a member x. 
+send_gdb "print j.x\n"
+gdb_expect {
+   -re "warning: x ambiguous; using J::K::A1::x. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       pass "print j.x"
+   }
+   -re ".*$gdb_prompt $" { fail "print j.x" }
+   timeout { fail "(timeout) print j.x" }
+}
+
+# JV is derived from A1 but A1 is a virtual base. Should not
+# report an ambiguity in this case. 
+send_gdb "print jv.x\n"
+gdb_expect {
+   -re "warning: x ambiguous.*Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       fail "print jv.x (ambiguity reported)"
+   }
+   -re "\\$\[0-9\]* = 0\r\n$gdb_prompt $" { pass "print jv.x" }
+   -re ".*$gdb_prompt $" { fail "print jv.x (??)" }
+   timeout { fail "(timeout) print jv.x" }
+}
+
+# JVA1 is derived from A1; A1 occurs as a virtual base in two
+# ancestors, and as a non-virtual immediate base. Ambiguity must
+# be reported. 
+send_gdb "print jva1.x\n"
+gdb_expect {
+   -re "warning: x ambiguous; using JVA1::KV::A1::x. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       pass "print jva1.x"
+   }
+   -re ".*$gdb_prompt $" { fail "print jva1.x" }
+   timeout { fail "(timeout) print jva1.x" }
+}
+
+# JVA2 is derived from A1 & A2; A1 occurs as a virtual base in two
+# ancestors, and A2 is a non-virtual immediate base. Ambiguity must
+# be reported as A1 and A2 both have a member 'x'.
+send_gdb "print jva2.x\n"
+gdb_expect {
+   -re "warning: x ambiguous; using JVA2::KV::A1::x. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       pass "print jva2.x"
+   }
+   -re ".*$gdb_prompt $" { fail "print jva2.x" }
+   timeout { fail "(timeout) print jva2.x" }
+}
+
+# JVA1V is derived from A1; A1 occurs as a virtual base in two
+# ancestors, and also as a virtual immediate base. Ambiguity must
+# not be reported.
+send_gdb "print jva1v.x\n"
+gdb_expect {
+   -re "warning: x ambiguous.*Use a cast to disambiguate.\r\n\\$\[0-9\]* = 0\r\n$gdb_prompt $" {
+       fail "print jva1v.x (ambiguity reported)"
+   }
+   -re "\\$\[0-9\]* = 0\r\n$gdb_prompt $" { pass "print jva1v.x" }
+   -re ".*$gdb_prompt $" { fail "print jva1v.x (??)" }
+   timeout { fail "(timeout) print jva1v.x" }
+}
+
+# Now check for ambiguous bases.
+
+# J is derived from A1 twice; report ambiguity if a J is
+# cast to an A1.
+send_gdb "print (A1)j\n"
+gdb_expect {
+   -re "warning: A1 ambiguous; using J::K::A1. Use a cast to disambiguate.\r\n\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" {
+       pass "print (A1)j"
+   }
+   -re ".*$gdb_prompt $" { fail "print (A1)j" }
+   timeout { fail "(timeout) print (A1)j" }
+}
+
+# JV is derived from A1 twice, but A1 is a virtual base; should
+# not report ambiguity when a JV is cast to an A1.
+send_gdb "print (A1)jv\n"
+gdb_expect {
+   -re "warning: A1 ambiguous.*Use a cast to disambiguate.\r\n\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" {
+       fail "print (A1)jv (ambiguity reported)"
+   }
+   -re "\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" { pass "print (A1)jv" }
+   -re ".*$gdb_prompt $" { fail "print (A1)jv (??)" }
+   timeout { fail "(timeout) print (A1)jv" }
+}
+
+# JVA1 is derived from A1; A1 is a virtual base and also a
+# non-virtual base.  Must report ambiguity if a JVA1 is cast to an A1.
+send_gdb "print (A1)jva1\n"
+gdb_expect {
+   -re "warning: A1 ambiguous; using JVA1::KV::A1. Use a cast to disambiguate.\r\n\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" {
+       pass "print (A1)jva1"
+   }
+   -re ".*$gdb_prompt $" { fail "print (A1)jva1" }
+   timeout { fail "(timeout) print (A1)jva1" }
+}
+
+# JVA1V is derived from A1; A1 is a virtual base indirectly
+# and also directly; must not report ambiguity when a JVA1V is cast to an A1.
+send_gdb "print (A1)jva1v\n"
+gdb_expect {
+   -re "warning: A1 ambiguous.*Use a cast to disambiguate.\r\n\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" {
+       fail "print (A1)jva1v (ambiguity reported)"
+   }
+   -re "\\$\[0-9\]* = \{x = 0, y = 0\}\r\n$gdb_prompt $" { pass "print (A1)jva1v"
+   }
+   -re ".*$gdb_prompt $" { fail "print (A1)jva1v (??)" }
+   timeout { fail "(timeout) print (A1)jva1v" }
+}
+
+
diff --git a/gdb/testsuite/gdb.hp/attach.c b/gdb/testsuite/gdb.hp/attach.c
new file mode 100644
index 0000000..1aad3c1
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/attach.c
@@ -0,0 +1,19 @@
+/* This program is intended to be started outside of gdb, and then
+   attached to by gdb.  Thus, it simply spins in a loop.  The loop
+   is exited when & if the variable 'should_exit' is non-zero.  (It
+   is initialized to zero in this program, so the loop will never
+   exit unless/until gdb sets the variable to non-zero.)
+   */
+#include <stdio.h>
+
+int  should_exit = 0;
+
+main ()
+{
+  int  local_i = 0;
+
+  while (! should_exit)
+    {
+      local_i++;
+    }
+}
diff --git a/gdb/testsuite/gdb.hp/attach.exp b/gdb/testsuite/gdb.hp/attach.exp
new file mode 100644
index 0000000..372acd0
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/attach.exp
@@ -0,0 +1,416 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# On HP-UX 11.0, this test is causing a process running
+# the program "attach" to be left around spinning.
+# Until we figure out why, I am commenting out the test
+# to avoid polluting tiamat (our 11.0 nightly test machine)
+# with these processes. RT
+#
+# Setting the magic bit in the target app should work.
+# I added a "kill", and also a test for the R3 register
+#  warning.           JB
+# 
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    #setup_xfail "*-*-*"
+    return 0
+}
+
+set testfile "attach"
+set srcfile  ${testfile}.c
+set srcfile2 ${testfile}2.c
+set binfile  ${objdir}/${subdir}/${testfile}
+set binfile2 ${objdir}/${subdir}/${testfile}2
+set cleanupfile ${objdir}/${subdir}/${testfile}.awk
+
+#execute_anywhere "rm -f ${binfile} ${binfile2}"
+remote_exec build "rm -f ${binfile} ${binfile2}"
+# For debugging this test
+#
+#log_user 1
+
+# Clean out any old files from past runs.
+#
+remote_exec build "${cleanupfile}"
+
+# build the first test case
+#
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Build the in-system-call test
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#if  { [compile "-E ${srcdir}/${subdir}/compiler.c >> ${objdir}/${subdir}/${testfile}.tmp"] != ""# } {
+#    perror "Couldn't make ${testfile}.tmp"
+#    return -1
+#}
+
+#execute_anywhere "mv ${objdir}/${subdir}/${testfile}.tmp ${binfile}.ci"
+
+#source ${binfile}.ci
+
+proc do_attach_tests {} {
+   global gdb_prompt
+   global binfile
+   global srcfile
+   global testfile
+   global objdir
+   global subdir
+   global timeout
+
+   # Start the program running and then wait for a bit, to be sure
+   # that it can be attached to.
+   #
+   set testpid [eval exec $binfile &]
+   exec sleep 2
+
+   # Verify that we cannot attach to nonsense.
+   #
+   send_gdb "attach abc\n"
+   gdb_expect {
+      -re "Illegal process-id: abc.*$gdb_prompt $"\
+                      {pass "attach to nonsense is prohibited"}
+      -re "Attaching to.*$gdb_prompt $"\
+                      {fail "attach to nonsense is prohibited (bogus pid allowed)"}
+      -re "$gdb_prompt $" {fail "attach to nonsense is prohibited"}
+      timeout         {fail "(timeout) attach to nonsense is prohibited"}
+   }
+
+   # Verify that we cannot attach to what appears to be a valid
+   # process ID, but is a process that doesn't exist.  (I don't
+   # believe any process is ever assigned #0, at least on HPUX.)
+   #
+   send_gdb "attach 0\n"
+   gdb_expect {
+      # This reponse is expected on HP-UX 10.20 (i.e., ptrace-based).
+      -re "Attaching to.*, process 0.*No such process.*$gdb_prompt $"\
+                      {pass "attach to nonexistent process is prohibited"}
+      # This response is expected on HP-UX 10.30 & 11.0 (i.e., ttrace-based).
+      -re "Attaching to.*, process 0.*Permission denied.*$gdb_prompt $"\
+                      {pass "attach to nonexistent process is prohibited"}
+      -re "$gdb_prompt $" {fail "attach to nonexistent process is prohibited"}
+      timeout         {fail "(timeout) attach to nonexistent process is prohibited"}
+   }
+
+   # Verify that we can attach to the process by first giving its
+   # executable name via the file command, and using attach with
+   # the process ID.
+   #
+   # (Actually, the test system appears to do this automatically
+   # for us.  So, we must also be prepared to be asked if we want
+   # to discard an existing set of symbols.)
+   #
+   send_gdb "file $binfile\n"
+   gdb_expect {
+      -re "Load new symbol table from.*y or n.*$" {
+         send_gdb "y\n"
+         gdb_expect {
+            -re "Reading symbols from $binfile\.\.\.*done.*$gdb_prompt $"\
+                            {pass "(re)set file, before attach1"}
+            -re "$gdb_prompt $" {fail "(re)set file, before attach1"}
+            timeout         {fail "(timeout) (re)set file, before attach1"}
+         }
+      }
+      -re "Reading symbols from $binfile\.\.\.*done.*$gdb_prompt $"\
+                      {pass "set file, before attach1"}
+      -re "$gdb_prompt $" {fail "set file, before attach1"}
+      timeout         {fail "(timeout) set file, before attach1"}
+   }
+
+   send_gdb "attach $testpid\n"
+   gdb_expect {
+      -re "Attaching to program.*$binfile, process $testpid.*main.*at .*$srcfile:.*$gdb_prompt $"\
+                      {pass "attach1, after setting file"}
+      -re "$gdb_prompt $" {fail "attach1, after setting file"}
+      timeout         {fail "(timeout) attach1, after setting file"}
+   }
+
+   # Verify that we can "see" the variable "should_exit" in the
+   # program, and that it is zero.
+   #
+   send_gdb "print should_exit\n"
+   gdb_expect {
+      -re ".* = 0.*$gdb_prompt $"\
+                      {pass "after attach1, print should_exit"}
+      -re "$gdb_prompt $" {fail "after attach1, print should_exit"}
+      timeout         {fail "(timeout) after attach1, print should_exit"}
+   }
+
+   # Detach the process.
+   #
+   send_gdb "detach\n"
+   gdb_expect {
+      -re "Detaching from program: .*$binfile.*$gdb_prompt $"\
+                      {pass "attach1 detach"}
+      -re "$gdb_prompt $" {fail "attach1 detach"}
+      timeout         {fail "(timeout) attach1 detach"}
+   }
+
+   # Wait a bit for gdb to finish detaching
+   #
+   exec sleep 5
+
+   # Purge the symbols from gdb's brain.  (We want to be certain
+   # the next attach, which won't be preceded by a "file" command,
+   # is really getting the executable file without our help.)
+   #
+   set old_timeout $timeout
+   set timeout     [expr $timeout + 20]
+   send_gdb "file\n"
+   gdb_expect {
+      -re ".*gdb internal error.*$" { 
+          fail "Internal error, prob. Memory corruption" 
+      }
+      -re "No exec file now.*Discard symbol table.*y or n.*$" {
+         send_gdb "y\n"
+         gdb_expect {
+            -re "No symbol file now.*$gdb_prompt $"\
+                            {pass "attach1, purging symbols after detach"}
+            -re "$gdb_prompt $" {fail "attach1, purging symbols after detach"}
+            timeout         {fail "(timeout) attach1, purging symbols after detach"}
+         }
+      }
+      -re "$gdb_prompt $" {fail "attach1, purging file after detach"}
+      timeout         {
+          fail "(timeout) attach1, purging file after detach"
+      }
+   }
+   set timeout $old_timeout
+
+   # Verify that we can attach to the process just by giving the
+   # process ID.
+   #
+   send_gdb "attach $testpid\n"
+   gdb_expect {
+      -re "Attaching to process $testpid.*Reading symbols from $binfile.*main.*at .*$gdb_prompt $"\
+                      {pass "attach2"}
+      -re "$gdb_prompt $" {fail "attach2"}
+      timeout         {fail "(timeout) attach2"}
+   }
+
+   # Verify that we can modify the variable "should_exit" in the
+   # program.
+   #
+   send_gdb "set should_exit=1\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "after attach2, set should_exit"}
+      timeout         {fail "(timeout) after attach2, set should_exit"}
+   }
+
+   # Verify that the modification really happened.
+   #
+   send_gdb "tbreak 19\n"
+   gdb_expect {
+      -re "Breakpoint .*at.*$srcfile, line 19.*$gdb_prompt $"\
+                      {pass "after attach2, set tbreak postloop"}
+      -re "$gdb_prompt $" {fail "after attach2, set tbreak postloop"}
+      timeout         {fail "(timeout) after attach2, set tbreak postloop"}
+   }
+   send_gdb "continue\n"
+   gdb_expect {
+      -re "main.*at.*$srcfile:19.*$gdb_prompt $"\
+                      {pass "after attach2, reach tbreak postloop"}
+      -re "$gdb_prompt $" {fail "after attach2, reach tbreak postloop"}
+      timeout         {fail "(timeout) after attach2, reach tbreak postloop"}
+   }
+
+   # Allow the test process to exit, to cleanup after ourselves.
+   #
+   send_gdb "continue\n"
+   gdb_expect {
+      -re "Program exited normally.*$gdb_prompt $"\
+                      {pass "after attach2, exit"}
+      -re "$gdb_prompt $" {fail "after attach2, exit"}
+      timeout         {fail "(timeout) after attach2, exit"}
+   }
+
+   # Make sure we don't leave a process around to confuse
+   # the next test run (and prevent the compile by keeping
+   # the text file busy), in case the "set should_exit" didn't
+   # work.
+   #
+#   execute_anywhere "kill -9 ${testpid}"
+remote_exec build "kill -9 ${testpid}"
+   # Start the program running and then wait for a bit, to be sure
+   # that it can be attached to.
+   #
+   set testpid [eval exec $binfile &]
+   exec sleep 2
+
+   # Verify that we can attach to the process, and find its a.out
+   # when we're cd'd to some directory that doesn't contain the
+   # a.out.  (We use the source path set by the "dir" command.)
+   #
+   send_gdb "dir ${objdir}/${subdir}\n"
+   gdb_expect {
+      -re ".*Source directories searched: .*$gdb_prompt $"\
+                      {pass "set source path"}
+      -re "$gdb_prompt $" {fail "set source path"}
+      timeout         {fail "(timeout) set source path"}
+   }
+
+   send_gdb "cd /tmp\n"
+   gdb_expect {
+      -re ".*Working directory /tmp.*$gdb_prompt $"\
+                      {pass "cd away from process' a.out"}
+      -re "$gdb_prompt $" {fail "cd away from process' a.out"}
+      timeout         {fail "(timeout) cd away from process' a.out"}
+   }
+
+   # Explicitly flush out any knowledge of the previous attachment.
+   send_gdb "symbol\n"
+   gdb_expect {
+      -re ".*Discard symbol table from.*y or n. $"\
+                      {send_gdb "y\n"
+                       gdb_expect {
+                          -re ".*No symbol file now.*$gdb_prompt $"\
+                                          {pass "before attach3, flush symbols"}
+                          -re "$gdb_prompt $" {fail "before attach3, flush symbols"}
+                          timeout         {fail "(timeout) before attach3, flush symbols"}
+                       }
+                      }
+      -re ".*No symbol file now.*$gdb_prompt $"\
+                      {pass "before attach3, flush symbols"}
+      -re "$gdb_prompt $" {fail "before attach3, flush symbols"}
+      timeout         {fail "(timeout) before attach3, flush symbols"}
+   }
+   send_gdb "exec\n"
+   gdb_expect {
+      -re ".*No exec file now.*$gdb_prompt $"\
+                      {pass "before attach3, flush exec"}
+      -re "$gdb_prompt $" {fail "before attach3, flush exec"}
+      timeout         {fail "(timeout) before attach3, flush exec"}
+   }
+
+   send_gdb "attach $testpid\n"
+   gdb_expect {
+      -re "Attaching to process $testpid.*Reading symbols from $binfile.*main.*at .*$gdb_prompt $"\
+                      {pass "attach when process' a.out not in cwd"}
+      -re "$gdb_prompt $" {fail "attach when process' a.out not in cwd"}
+      timeout         {fail "(timeout) attach when process' a.out not in cwd"}
+   }
+
+   send_gdb "kill\n"
+   gdb_expect {
+      -re ".*Kill the program being debugged.*y or n. $"\
+                      {send_gdb "y\n"
+                       gdb_expect {
+                          -re "$gdb_prompt $" {pass "after attach3, exit"}
+                          timeout {fail "(timeout) after attach3, exit"}
+                       }
+                      }
+      -re "$gdb_prompt $" {fail "after attach3, exit"}
+      timeout         {fail "(timeout) after attach3, exit"}
+   }
+}
+
+proc do_call_attach_tests {} {
+   global gdb_prompt
+   global binfile2
+
+   # Start the program running and then wait for a bit, to be sure
+   # that it can be attached to.
+   #
+   set testpid [eval exec $binfile2 &]
+   exec sleep 2
+
+   # Attach
+   #
+   send_gdb "attach $testpid\n"
+   gdb_expect {
+      -re ".*warning: reading register.*I.*O error.*$gdb_prompt $" {
+         fail "attach call, read register 3 error"
+     }
+     -re "Attaching to.*process $testpid.*libc.*$gdb_prompt $" {
+         pass "attach call"
+     }
+      -re "$gdb_prompt $" {fail "attach call"}
+      timeout         {fail "(timeout) attach call"}
+   }
+
+   # See if other registers are problems
+   #
+   send_gdb "i r r3\n"
+   gdb_expect {
+       -re ".*warning: reading register.*$gdb_prompt $" {
+           pass "CHFts23490: known bug"
+       }
+       -re ".*r3.*$gdb_prompt $" {
+           pass "Bug fixed, Yayyy!"
+       }
+       timeout { fail "timeout on info reg" }
+   }
+
+   # Get rid of the process
+   #
+   gdb_test "p should_exit = 1" ".*" ""
+   gdb_test "c" ".*Program exited normally.*" ""
+   
+   # Be paranoid
+   #
+#   execute_anywhere "kill -9 ${testpid}"
+remote_exec build "kill -9 ${testpid}"
+
+}
+
+
+# Start with a fresh gdb
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This is a test of gdb's ability to attach to a running process.
+#
+do_attach_tests
+
+# Test attaching when the target is inside a system call
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+do_call_attach_tests
+
+# Until "set follow-fork-mode" and "catch fork" are implemented on
+# other targets...
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+   setup_xfail "*-*-*"
+}
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/attach2.c b/gdb/testsuite/gdb.hp/attach2.c
new file mode 100644
index 0000000..8eb7a05
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/attach2.c
@@ -0,0 +1,23 @@
+/* This program is intended to be started outside of gdb, and then
+   attached to by gdb.  Thus, it simply spins in a loop.  The loop
+   is exited when & if the variable 'should_exit' is non-zero.  (It
+   is initialized to zero in this program, so the loop will never
+   exit unless/until gdb sets the variable to non-zero.)
+   */
+#include <stdio.h>
+#include <stdlib.h>
+
+int  should_exit = 0;
+
+main ()
+{
+  int  local_i = 0;
+
+  sleep( 10 ); /* System call causes register fetch to fail */
+               /* This is a known HPUX "feature"            */
+  while (! should_exit)
+    {
+      local_i++;
+    }
+  return (0);
+}
diff --git a/gdb/testsuite/gdb.hp/attach2.exp b/gdb/testsuite/gdb.hp/attach2.exp
new file mode 100644
index 0000000..e298ee9
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/attach2.exp
@@ -0,0 +1,263 @@
+# attach.exp -- Expect script to test attaching to a threaded pgm
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+# Temporarily comment out - hanging
+#return 0
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+# NOTE: this command undoes any up/down stuff!
+#
+proc pre_timeout { how_long } {
+    global timeout
+
+    set timeout [expr "$timeout + $how_long"]
+}
+
+proc post_timeout {} {
+    global timeout
+    global oldtimeout
+
+    set timeout $oldtimeout
+    gdb_test "p \$pc" ".*" ""
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+# We used to wait 5 seconds , but tiamat is faster than
+# hydra...or is it that the OS allocates time differently(?).
+#
+set delay 5
+if { ![istarget "hppa*-*-hpux11.*"] } {
+    set delay 45
+}
+
+set testfile quicksort
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+set oldtimeout $timeout
+#set timeout [expr "$timeout + 100"]
+set oldverbose $verbose
+#set verbose 40
+
+# To build the executable we need to link against the thread library.
+#
+#     cc -Ae -g -o quicksort -lpthread quicksort.c
+#
+#remote_exec build "${srcfile} -Ae -g -lpthread -o ${binfile}"
+#gdb_compile "${srcfile} -Ae -g -lpthread -o ${binfile}"
+
+if {$gcc_compiled == 0} {
+    set additional_flags "additional_flags=-Ae"
+} else {
+    set additional_flags ""
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}.o" object [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+# Start the application running and get its pid.
+# Then we wait for it to get started and attach.
+# 
+set testpid [eval exec $binfile 1 &]
+exec sleep $delay
+
+# Now attach to the file.
+#
+pre_timeout 100
+gdb_test "attach $testpid" ".*Attaching to process.*Reading symbols from.*done.*" "attach to target"
+post_timeout
+
+# Wait for things to quiesce.
+#
+exec sleep 0
+
+send_gdb "bt\n" 
+
+set do_return 0
+set do_go_to_118 0
+pre_timeout 400
+gdb_expect {
+    -re ".*sleep.*work_init.*main.*$gdb_prompt $"   { 
+        pass "at expected location" 
+    }
+    -re ".*drand48.*$gdb_prompt $" {
+        set do_go_to_118 1
+    }
+    -re ".*pthread_mutex_lock.*$gdb_prompt $" {
+        set do_go_to_118 1
+    }
+    -re ".*pthread_mutex_unlock.*$gdb_prompt $" {
+        set do_go_to_118 1
+    }
+    -re ".*main.*$gdb_prompt $" {
+        set do_go_to_118 1
+    }
+    -re ".*No stack.*$gdb_prompt $" {
+        fail "Failed attach, change wait amount down, rest would fail"
+        set do_return 1
+    }
+    -re ".*$gdb_prompt $" {
+        # Who knows?
+        #
+        set do_go_to_118 1
+    }
+    timeout { 
+        set do_return 1
+        fail "timeout on bt, avoiding rest of test" 
+    }
+}
+post_timeout
+
+# Too late; just give up.
+#
+if { $do_return } {
+    set timeout $oldtimeout
+    set verbose $oldverbose
+    return 0
+}
+
+# Maybe too early--set a temp break and continue.
+# We have to set this on both paths, so that we can
+# know what numbers breakpoints will be.
+#
+gdb_test "tb 118" ".*Breakpoint 1.*118.*" ""
+if { $do_go_to_118 } {
+    pre_timeout 100
+    send_gdb "c\n"
+    gdb_expect {
+        -re ".*at.*118.*118.*$gdb_prompt $" {
+            # Ok, just keep going
+        }
+        -re ".*Program exited.*$gdb_prompt $" {
+            fail "Attached too late, set wait amount downwards"
+            set timeout $oldtimeout
+            set verbose $oldverbose
+            return 0
+        }
+        -re ".*$gdb_prompt $" {
+            fail "Unexpected result on attach" 
+            set timeout $oldtimeout
+            set verbose $oldverbose
+            return 0
+        }
+        timeout { 
+            fail "timeout on continue " 
+        }
+    }
+    post_timeout
+}
+
+# Look at the threads.
+#
+pre_timeout 100
+gdb_test "info thread" ".*7.*6.*5.*4.*3.*2.*\\\* 1.*thread.*" "first info thread"
+post_timeout
+
+# We expect to be inside the "sleep" call, so check that.
+#
+if { [expr "!$do_go_to_118"] } {
+    gdb_test "up" ".*\#1.*nanosleep.*" "up 1" 
+    gdb_test "up" ".*\#2.*sleep.*"     "up 2" 
+    pre_timeout 100
+    gdb_test "up" ".*\#3.*work_init.*$testfile.*c:118.*sleep.*" "up 3" 
+    post_timeout
+} else {
+    send_user "Skipped three tests\n"
+}
+
+# Get out of that call.
+#
+gdb_test "b 120" ".*Breakpoint 2.*120.*" "set bp"
+pre_timeout 100
+gdb_test "c"     ".*Breakpoint 2.*at.*120.*" "hit bp"
+post_timeout
+
+# Look at the threads.
+#
+pre_timeout 100
+gdb_test "info thread" ".*7.*6.*5.*4.*3.*2.*1.*thread.*$testfile.*c*120.*" "2nd info thread"
+post_timeout
+
+# Do some more stuff, to make sure we can
+#
+gdb_test "thread 3" ".*Switching to.*thread.*ksleep.*" "switch thread"
+
+gdb_test "up" ".*_lwp_cond_timedwait.*"   "up 5"
+gdb_test "up" ".*pthread_cond_wait.*"     "up 6"
+gdb_test "up" ".*\#3.*worker.*144.*"      "up 7"
+gdb_test "up" ".*__pthread_exit.*"        "up 8"
+gdb_test "up" ".*Initial.*cannot go up.*" "found thread base"
+
+gdb_test "b 145 thr 3" ".*Breakpoint 3.*145.*"             "thread-specific bp"
+gdb_test "i b"         ".*2.*breakpoint.*at.*120.*3.*breakpoint.*at.*145 thread 3.*" "show thread-specific bp"
+gdb_test "del 2" ".*" ""
+
+gdb_test "c" ".*Breakpoint 3.*145.*" "hit thread-specific bp"
+gdb_test "i th" ".*\\\* 3.*145.*" "at correct thread"
+
+pre_timeout 100
+gdb_test "n" ".*146.*" "next from thread-specific bp"
+post_timeout
+
+gdb_test "d 3" ".*" ""
+gdb_test "c"   ".*Program exited normally\..*" "run to finish"
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
+
+
diff --git a/gdb/testsuite/gdb.hp/average.c b/gdb/testsuite/gdb.hp/average.c
new file mode 100644
index 0000000..070eaef
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/average.c
@@ -0,0 +1,39 @@
+/* This is a sample program for the HP WDB debugger. */
+
+#include <stdio.h>
+
+#define num   10
+
+static int my_list[num] = {3,4,2,0,2,1,8,3,6,7};
+
+#ifdef __STDC__ 
+void print_average(int list[], int low, int high) 
+#else
+void print_average(list, low, high)
+int list[], low, high;
+#endif
+    {
+        int total, num_elements, average;
+        total = sum(list, low, high);
+        num_elements = high - low;  /* note this is an off-by-one bug */
+
+        average = total / num_elements;
+        printf("%10.d\n", average);
+    }
+
+#ifdef __STDC__
+int main(void)
+#else
+main ()
+#endif
+{
+    char c;
+    int first = 0;
+    int last = num-1;
+
+    /* Try two test cases. */
+    print_average (my_list, first, last);
+    print_average (my_list, first, last - 3);
+foo:
+    exit(0);
+}
diff --git a/gdb/testsuite/gdb.hp/classes-hp.exp b/gdb/testsuite/gdb.hp/classes-hp.exp
new file mode 100644
index 0000000..cb22c96
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/classes-hp.exp
@@ -0,0 +1,859 @@
+# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "misc-hp"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Test ptype of class objects.
+#
+
+proc test_ptype_class_objects {} {
+    global gdb_prompt
+    global ws
+
+    # Note that struct members are public by default, so we don't print
+    # "public:" for the public members of structs.
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype struct default_public_struct\n"
+    gdb_expect {
+	-re "type = struct default_public_struct \{${ws}int a;${ws}int b;\r\n\}\r\n$gdb_prompt $" {
+	    pass "ptype struct default_public_struct"
+	}
+	-re "type = class default_public_struct \{\r\n.*int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct default_public_struct"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct default_public_struct" }
+	timeout { fail "ptype struct default_public_struct (timeout)" ; return }
+    }
+
+    # Note that struct members are public by default, so we don't print
+    # "public:" for the public members of structs.
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype struct explicit_public_struct\n"
+    gdb_expect {
+	-re "type = struct explicit_public_struct \{${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype struct explicit_public_struct"
+	}
+	-re "type = class explicit_public_struct \{\r\n.*int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct explicit_public_struct"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct explicit_public_struct" }
+	timeout { fail "ptype struct explicit_public_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct protected_struct\n"
+    gdb_expect {
+	-re "type = struct protected_struct \{${ws}protected:${ws}int a;${ws}int b;\r\n\}\r\n$gdb_prompt $" {
+	    pass "ptype struct protected_struct (FIXME)"
+	}
+	-re "type = class protected_struct \{${ws}protected:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct protected_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct protected_struct" }
+	timeout { fail "ptype struct protected_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct private_struct\n"
+    gdb_expect {
+	-re "type = struct private_struct \{${ws}private:${ws}int a;${ws}int b;\r\n\}\r\n$gdb_prompt $" {
+	    pass "ptype struct private_struct (FIXME)"
+	}
+	-re "type = class private_struct \{${ws}private:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" { 
+	    setup_xfail "*-*-*"
+	    fail "ptype struct private_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct private_struct" }
+	timeout { fail "ptype struct private_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype struct mixed_protection_struct\n"
+    gdb_expect {
+	-re "type = struct mixed_protection_struct \{${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;\[\r\n\]+\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype struct mixed_protection_struct (FIXME)"
+	}
+        -re "type = struct mixed_protection_struct \{\r\n\[ \]*public:\r\n\[ \]*int a;\r\n\[ \]*int b;\r\n\[ \]*private:\r\n\[ \]*int c;\r\n\[ \]*int d;\r\n\[ \]*protected:\r\n\[ \]*int e;\r\n\[ \]*int f;\r\n\[ \]*public:\r\n\[ \]*int g;\r\n\[ \]*private:\r\n\[ \]*int h;\r\n\[ \]*protected:\r\n\[ \]*int i;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype struct mixed_protection_struct (extra public)"
+	}
+	-re "type = class mixed_protection_struct \{${ws}public:${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype struct mixed_protection_struct (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype struct mixed_protection_struct" }
+	timeout { fail "ptype struct mixed_protection_struct (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just fails to distinguish between
+    # class and struct, and everything else is OK.
+
+    send_gdb "ptype class public_class\n"
+    gdb_expect {
+	-re "type = class public_class \{${ws}public:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class public_class (FIXME)"
+	}
+	-re "type = struct public_class \{${ws}int a;${ws}int b;\r\n\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class public_class (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class public_class" }
+	timeout { fail "ptype class public_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class protected_class\n"
+    gdb_expect {
+	-re "type = class protected_class \{${ws}protected:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class protected_class"
+	}
+	-re "type = struct protected_class \{${ws}int a;${ws}int b;\r\n\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class protected_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class protected_class" }
+	timeout { fail "ptype class protected_class (timeout)" ; return }
+    }
+
+    # Accept it as an expected failure if gdb just emits a superflous "private:"
+    # attribute, since classes default to private and for consistency with
+    # structs (where we don't print the "public:" attribute) we don't print
+    # the "private:" attribute.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class default_private_class\n"
+    gdb_expect {
+	-re "type = class default_private_class \{${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class default_private_class (FIXME)"
+	}
+	-re "type = class default_private_class \{${ws}private:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class default_private_class (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class default_private_class" }
+	timeout { fail "ptype class default_private_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class explicit_private_class\n"
+    gdb_expect {
+	-re "type = class explicit_private_class \{${ws}private:${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class explicit_private_class"
+	}
+	-re "type = class explicit_private_class \{\r\n\[ \]*int a;\r\n\[ \]*int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class explicit_private_class (OK for HP aCC)"
+	}
+	-re "type = struct explicit_private_class \{${ws}int a;${ws}int b;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class explicit_private_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class explicit_private_class" }
+	timeout { fail "ptype class explicit_private_class (timeout)" ; return }
+    }
+
+    send_gdb "ptype class mixed_protection_class\n"
+    gdb_expect {
+	-re "type = class mixed_protection_class \{${ws}public:${ws}int a;${ws}int b;${ws}private:${ws}int c;${ws}int d;${ws}protected:${ws}int e;${ws}int f;${ws}public:${ws}int g;${ws}private:${ws}int h;${ws}protected:${ws}int i;\r\n.*\}\r\n$gdb_prompt $" {
+	    pass "ptype class mixed_protection_class"
+	}
+	-re "type = struct mixed_protection_class \{${ws}int a;${ws}int b;${ws}int c;${ws}int d;${ws}int e;${ws}int f;${ws}int g;${ws}int h;${ws}int i;\r\n.*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class mixed_protection_class"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class mixed_protection_class" }
+	timeout { fail "ptype class mixed_protection_class (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype class A\n"
+    gdb_expect {
+	-re "type = (class|struct) A \{(${ws}public:|)${ws}int a;${ws}int x;((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(A const &\\);)|(${ws}A\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class A"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class A"
+	}
+	timeout {
+	    fail "ptype class A (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class B\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}public:${ws}int b;${ws}int x;${ws}B & operator=\\(B const &\\);${ws}B\\(B const &\\);${ws}B\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class B"
+	}
+	-re "type = class B : public A \{${ws}public:${ws}int b;${ws}int x;((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(B const &\\);)|(${ws}B\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class B (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class B"
+	}
+	timeout {
+	    fail "ptype class B (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class C\n"
+    gdb_expect {
+	-re "type = class C : public A \{${ws}public:${ws}int c;${ws}int x;${ws}C & operator=\\(C const &\\);${ws}C\\(C const &\\);${ws}C\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class C"
+	}
+	-re "type = class C : public A \{${ws}public:${ws}int c;${ws}int x;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(C const &\\);)|(${ws}C\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class C (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class C"
+	}
+	timeout {
+	    fail "ptype class C (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class D\n"
+    gdb_expect {
+	-re "type = class D : public B, public C \{${ws}public:${ws}int d;${ws}int x;${ws}D & operator=\\(D const &\\);${ws}D\\(D const &\\);${ws}D\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class D"
+	}
+	-re "type = class D : public B, public C \{${ws}public:${ws}int d;${ws}int x;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(D const &\\);)|(${ws}D\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class D (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class D"
+	}
+	timeout {
+	    fail "ptype class D (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class E\n"
+    gdb_expect {
+	-re "type = class E : public D \{${ws}public:${ws}int e;${ws}int x;${ws}E & operator=\\(E const &\\);${ws}E\\(E const &\\);${ws}E\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class E"
+	}
+	-re "type = class E : public D \{${ws}public:${ws}int e;${ws}int x;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(E const &\\);)|(${ws}E\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class E"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class E"
+	}
+	timeout {
+	    fail "ptype class E (timeout)"
+	    return
+	}
+    }
+
+    send_gdb "ptype class vA\n"
+    gdb_expect {
+	-re "type = (class|struct) vA \{(${ws}public:|)${ws}int va;${ws}int vx;${ws}vA & operator=\\(vA const &\\);${ws}vA\\(vA const &\\);${ws}vA\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re "type = (class|struct) vA \{(${ws}public:|)${ws}int va;${ws}int vx;((${ws}vA & operator=\\(vA const &\\);)|(${ws}vA\\(vA const &\\);)|(${ws}vA\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class vA (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vA"
+	}
+	timeout {
+	    fail "ptype class vA (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vB\n"
+    gdb_expect {
+	-re "type = class vB : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vb;${ws}int vx;${ws}vB & operator=\\(vB const &\\);${ws}vB\\(int, vB const &\\);${ws}vB\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vB (FIXME: non-portable virtual table constructs)"
+	}
+        -re "type = class vB : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vb;\r\n\[ \]*int vx;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype class vB (aCC)"
+        }
+	-re "type = class vB : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vb;${ws}int vx;((${ws}vB & operator=\\(vB const &\\);)|(${ws}vB\\(int, vB const &\\);)|(${ws}vB\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vB (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vB"
+	}
+	timeout {
+	    fail "ptype class vB (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vC\n"
+    gdb_expect {
+	-re "type = class vC : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vc;${ws}int vx;${ws}vC & operator=\\(vC const &\\);${ws}vC\\(int, vC const &\\);${ws}vC\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vC (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vC : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vc;\r\n\[ \]*int vx;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+	    pass "ptype class vC (aCC)"
+	}
+	-re "type = class vC : public virtual vA \{${ws}private:${ws}vA \\*_vb.vA;${ws}public:${ws}int vc;${ws}int vx;((${ws}vC & operator=\\(vC const &\\);)|(${ws}vC\\(int, vC const &\\);)|(${ws}vC\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vC (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vC"
+	}
+	timeout {
+	    fail "ptype class vC (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vD\n"
+    gdb_expect {
+	-re "type = class vD : public virtual vB, public virtual vC \{${ws}private:${ws}vC \\*_vb.vC;${ws}vB \\*_vb.vB;${ws}public:${ws}int vd;${ws}int vx;${ws}vD & operator=\\(vD const &\\);${ws}vD\\(int, vD const &\\);${ws}vD\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vD (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vD : public virtual vB, public virtual vC \{\r\n\[ \]*public:\r\n\[ \]*int vd;\r\n\[ \]*int vx;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+	    pass "ptype class vD (aCC)"
+	}
+	-re "type = class vD : public virtual vB, public virtual vC \{${ws}private:${ws}vC \\*_vb.vC;${ws}vB \\*_vb.vB;${ws}public:${ws}int vd;${ws}int vx;((${ws}vD & operator=\\(vD const &\\);)|(${ws}vD\\(int, vD const &\\);)|(${ws}vD\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vD (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vD"
+	}
+	timeout {
+	    fail "ptype class vD (timeout)"
+	    return
+	}
+    }
+
+    # Accept the form with embedded GNU style mangled virtual table constructs
+    # for now, but with a FIXME.  At some future point, gdb should use a
+    # portable representation for the virtual table constructs.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class vE\n"
+    gdb_expect {
+	-re "type = class vE : public virtual vD \{${ws}private:${ws}vD \\*_vb.vD;${ws}public:${ws}int ve;${ws}int vx;${ws}vE & operator=\\(vE const &\\);${ws}vE\\(int, vE const &\\);${ws}vE\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vE (FIXME: non-portable virtual table constructs)"
+	}
+	-re "type = class vE : public virtual vD \{\r\n\[ \]*public:\r\n\[ \]*int ve;\r\n\[ \]*int vx;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+	    pass "ptype class vE (aCC)"
+	}
+	-re "type = class vE : public virtual vD \{${ws}private:${ws}vD \\*_vb.vD;${ws}public:${ws}int ve;${ws}int vx;((${ws}vE & operator=\\(vE const &\\);)|(${ws}vE\\(int, vE const &\\);)|(${ws}vE\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class vE (FIXME) (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class vE"
+	}
+	timeout {
+	    fail "ptype class vE (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Base1\n"
+    gdb_expect {
+	-re "type = class Base1 \{${ws}public:${ws}int x;${ws}Base1 & operator=\\(Base1 const &\\);${ws}Base1\\(Base1 const &\\);${ws}Base1\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Base1"
+	}
+	-re "type = class Base1 \{${ws}public:${ws}int x;((${ws}Base1 & operator=\\(Base1 const &\\);)|(${ws}Base1\\(Base1 const &\\);)|(${ws}Base1\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Base1 (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Base1"
+	}
+	timeout {
+	    fail "ptype class Base1 (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Foo\n"
+    gdb_expect {
+    	-re "type = class Foo \{\r\n\[ \]*public:\r\n\[ \]*int x;\r\n\[ \]*int y;\r\n\[ \]*static int st;\r\n\r\n\[ \]*Foo\\(int, int\\);\r\n\[ \]*int operator!.void.;\r\n\[ \]*operator int.void.;\r\n\[ \]*int times.int.;\r\n\}\r\n$gdb_prompt $" {
+	    pass "ptype class Foo(aCC)"
+	}
+	-re "type = class Foo \{${ws}public:${ws}int x;${ws}int y;${ws}static int st;${ws}Foo & operator=\\(Foo const &\\);${ws}Foo\\(Foo const &\\);${ws}Foo\\(int, int\\);${ws}int operator!\\(void\\);${ws}int operator int\\(void\\);${ws}int times\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Foo"
+	}
+	-re "type = class Foo \{${ws}public:${ws}int x;${ws}int y;${ws}static int st;((${ws}Foo & operator=\\(Foo const &\\);)|(${ws}Foo\\(Foo const &\\);)|(${ws}Foo\\(int, int\\);)|(${ws}int operator!\\(void\\);)|(${ws}int operator int\\(void\\);)|(${ws}int times\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Foo (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Foo"
+	}
+	timeout {
+	    fail "ptype class Foo (timeout)"
+	    return
+	}
+    }
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype class Bar\n"
+    gdb_expect {
+	-re "type = class Bar : public Base1, public Foo \{${ws}public:${ws}int z;${ws}Bar & operator=\\(Bar const &\\);${ws}Bar\\(Bar const &\\);${ws}Bar\\(int, int, int\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Bar"
+	}
+	-re "type = class Bar : public Base1, public Foo \{${ws}public:${ws}int z;((${ws}Bar & operator=\\(Bar const &\\);)|(${ws}Bar\\(Bar const &\\);)|(${ws}Bar\\(int, int, int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype class Bar (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype class Bar"
+	}
+	timeout {
+	    fail "ptype class Bar (timeout)"
+	    return
+	}
+    }
+}
+
+#
+# Test simple access to class members.
+#
+
+proc test_non_inherited_member_access {} {
+    global gdb_prompt
+    
+    # Print non-inherited members of g_A.
+
+    gdb_test "print g_A.a" ".* = 1" "g_A.a incorrect"
+
+    gdb_test "print g_A.x" ".* = 2" "g_A.x incorrect"
+
+    # Print non-inherited members of g_B.
+
+    gdb_test "print g_B.b" ".* = 5" "g_B.b incorrect"
+
+    gdb_test "print g_B.x" ".* = 6" "g_B.x incorrect"
+
+    # Print non-inherited members of g_C.
+
+    gdb_test "print g_C.c" ".* = 9" "g_C.c incorrect"
+
+    gdb_test "print g_C.x" ".* = 10" "g_C.x incorrect"
+
+    # Print non-inherited members of g_D.
+
+    gdb_test "print g_D.d" ".* = 19" "g_D.d incorrect"
+
+    gdb_test "print g_D.x" ".* = 20" "g_D.x incorrect"
+
+    # Print non-inherited members of g_E.
+
+    gdb_test "print g_E.e" ".* = 31" "g_E.e incorrect"
+
+    gdb_test "print g_E.x" ".* = 32" "g_E.x incorrect"
+}
+
+#
+# Try access to non-members that are members of another class.
+# Should give errors.
+#
+
+proc test_wrong_class_members {} {
+    global gdb_prompt
+
+    gdb_test "print g_A.b" "There is no member( or method|) named b." "print g_A.b should be error"
+
+    gdb_test "print g_B.c" "There is no member( or method|) named c." "print g_B.c should be error"
+
+    gdb_test "print g_B.d" "There is no member( or method|) named d." "print g_B.d should be error"
+
+    gdb_test "print g_C.b" "There is no member( or method|) named b." "print g_C.b should be error"
+
+    gdb_test "print g_C.d" "There is no member( or method|) named d." "print g_C.d should be error"
+
+    gdb_test "print g_D.e" "There is no member( or method|) named e." "print g_D.e should be error"
+}
+
+#
+# Try access to non-members that are not members of any class.
+# Should give errors.
+#
+
+proc test_nonexistant_members {} {
+    global gdb_prompt
+
+    gdb_test "print g_A.y" "There is no member( or method|) named y." "print g_A.y should be error"
+
+    gdb_test "print g_B.z" "There is no member( or method|) named z." "print g_B.z should be error"
+
+    gdb_test "print g_C.q" "There is no member( or method|) named q." "print g_C.q should be error"
+
+    gdb_test "print g_D.p" "There is no member( or method|) named p." "print g_D.p should be error"
+}
+
+#
+# Pointers to class members
+#
+
+proc test_pointers_to_class_members {} {
+    global gdb_prompt
+    global decimal
+
+    gdb_test "print Bar::z" ".* = .int\[ \]*\[( \]*Bar::&\[)\]+\[ \]*Bar::z" "print Bar::z"
+
+    gdb_test "print &Foo::x" ".* = .int\[ \]*\[( \]*Foo::\[*)\]+\[ \]*&Foo::x" "print &Foo::x"
+
+    gdb_test "print (int)&Foo::x" ".* = 0" "print (int)&Foo::x"
+
+    send_gdb "print (int)&Bar::y == 2*sizeof(int)\n"
+    gdb_expect {
+	-re ".* = true\r\n$gdb_prompt $" {
+	    pass "print (int)&Bar::y == 2*sizeof(int)"
+	}
+	-re "There is no field named y.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print (int)&Bar::y == 2*sizeof(int)"
+	}
+	-re ".*$gdb_prompt $" { fail "print (int)&Bar::y == 2*sizeof(int)" }
+	timeout { fail "print (int)&Bar::y == 2*sizeof(int) (timeout)" ; return }
+    }
+
+    send_gdb "next\n"
+    setup_xfail "*-*-*"
+    gdb_expect {
+	-re "$decimal\[ \t\]+inheritance3 \[)(\]+;\r\n$gdb_prompt $" {}
+	-re ".*$gdb_prompt $" { fail "next to inheritance3" ; return }
+    }
+    clear_xfail "*-*-*"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print (int)pmi == sizeof(int)" ".* = false" "print (int)pmi == sizeof(int)"
+}
+
+#
+# Test static members.
+#
+
+proc test_static_members {} {
+    global gdb_prompt
+    global hex
+
+    send_gdb "print Foo::st\n"
+    gdb_expect {
+	-re ".* = 100\r\n$gdb_prompt $" {
+	    pass "print Foo::st"
+	}
+	-re "There is no field named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print Foo::st"
+	}
+	-re ".*$gdb_prompt $" { fail "print Foo::st" }
+       timeout { fail "print Foo::st (timeout)" ; return }
+    }
+
+    send_gdb "set foo.st = 200\n"
+    gdb_expect {
+	-re ".*$gdb_prompt $" {}
+    }
+
+    send_gdb "print bar.st\n"
+    gdb_expect {
+	-re ".* = 200\r\n$gdb_prompt $" {
+	    pass "print bar.st"
+	}
+	-re "There is no member( or method|) named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print bar.st"
+	}
+	-re ".*$gdb_prompt $" { fail "print bar.st" }
+       timeout { fail "print bar.st (timeout)" ; return }
+    }
+
+    send_gdb "print &foo.st\n"
+    gdb_expect {
+	-re ".* = .int \[*)\]+ $hex\r\n$gdb_prompt $" {
+	    pass "print &foo.st"
+	}
+	-re "There is no member( or method|) named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print &foo.st"
+	}
+	-re ".*$gdb_prompt $" { fail "print &foo.st" }
+       timeout { fail "print &foo.st (timeout)" ; return }
+    }
+
+    set got_bar_st 0
+    send_gdb "print &Bar::st\n"
+    gdb_expect {
+	-re ".* = .int \[*)\]+ $hex\r\n$gdb_prompt $" {
+	    pass "print &Bar::st"
+	    set got_bar_st 1
+	}
+	-re "There is no field named st.*$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "print &Bar::st"
+	}
+	-re ".*$gdb_prompt $" { fail "print &Bar::st" }
+       timeout { fail "print &Bar::st (timeout)" ; return }
+    }
+
+    if $got_bar_st then {
+	gdb_test "print *\$" ".* = 200" "print *\$"
+    }
+
+    gdb_test "set print static-members off" ""
+    gdb_test "print csi" \
+	"{x = 10, y = 20}" \
+	"print csi without static members"
+    gdb_test "print cnsi" \
+	"{x = 30, y = 40}" \
+	"print cnsi without static members"
+
+    gdb_test "set print static-members on" ""
+    setup_xfail_format "DWARF 1"
+    gdb_test "print csi" \
+	"{x = 10, y = 20, static null = {x = 0, y = 0, static null = <same as static member of an already seen type>}}" \
+	"print csi with static members"
+    setup_xfail_format "DWARF 1"
+    gdb_test "print cnsi" \
+	"{x = 30, y = 40, static null = {x = 0, y = 0, static null = <same as static member of an already seen type>, static yy = {z = 5, static xx = {x = 1, y = 2, static null = <same as static member of an already seen type>, static yy = <same as static member of an already seen type>}}}, static yy = <same as static member of an already seen type>}" \
+	"print cnsi with static members"
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+
+    # Get the debug format for the compiled test case.
+
+    if [ runto_main ] then {
+	get_debug_format
+    }
+
+    test_ptype_class_objects
+
+    if [ runto 'inheritance2(void)' ] then {
+	test_non_inherited_member_access
+	test_wrong_class_members
+	test_nonexistant_members
+    }
+
+    if [istarget "mips-idt-*"] then {
+	# Restart because IDT/SIM runs out of file descriptors.
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+    }
+
+    if [ runto_main ] then {
+	test_pointers_to_class_members
+	test_static_members
+    }
+
+    if [istarget "mips-idt-*"] then {
+	# Restart because IDT/SIM runs out of file descriptors.
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+    }
+ 
+    if [ runto marker_reg1 ] then {
+
+	gdb_test "finish" "Run till exit from.*" "finish from marker_reg1"
+
+	send_gdb "print v.method ()\n"
+	gdb_expect {
+	    -re "= 82.*$gdb_prompt $" {
+		pass "calling method for small class"
+	    }
+	    -re "Address requested for identifier .v. which is in a register.*$gdb_prompt $" {
+		setup_xfail "*-*-*" 2972
+		fail "calling method for small class"
+	    }
+	    -re ".*$gdb_prompt $" { fail "calling method for small class" }
+	    timeout { fail "calling method for small class (timeout)" }
+	    eof { fail "calling method for small class (eof)" }
+	}
+    }
+
+}
+
+do_tests
+
+
+# Some additional tests for enums inside classes
+
+
+# set a breakpoint and go there
+send_gdb "break 498\n"   
+gdb_expect {   
+   -re "Breakpoint \[0-9\] at.*$gdb_prompt $" { pass "set break 498" }
+   -re "$gdb_prompt $"                     { fail "set break 498" }
+   timeout                             { fail "(timeout) set break 498" }
+}
+send_gdb "continue\n"   
+gdb_expect {   
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at ${srcdir}/${subdir}/${srcfile}:498\r\n498.*\r\n$gdb_prompt $" { pass "continue" }
+   -re "$gdb_prompt $"                     { fail "continue" }
+   timeout                             { fail "(timeout) continue" }
+}
+
+# print the object
+send_gdb "print obj_with_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{priv_enum = red, x = 0\\}.*$gdb_prompt $" { pass "print obj_with_enum (1)" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum (1)" }
+   timeout                             { fail "(timeout) print obj_with_enum (1)" }
+}
+
+send_gdb "next\n"   
+gdb_expect {   
+   -re "$gdb_prompt $"                     { pass "next" }
+   timeout                             { fail "(timeout) next" }
+}
+
+# print the object again
+send_gdb "print obj_with_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{priv_enum = green, x = 0\\}.*$gdb_prompt $" { pass "print obj_with_enum (2)" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum (2)" }
+   timeout                             { fail "(timeout) print obj_with_enum (2)" }
+}
+
+# print out the enum member
+send_gdb "print obj_with_enum.priv_enum\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = green.*$gdb_prompt $" { pass "print obj_with_enum.priv_enum" }
+   -re "$gdb_prompt $"                     { fail "print obj_with_enum.priv_enum" }
+   timeout                             { fail "(timeout) print obj_with_enum.priv_enum" }
+}
+
+# ptype on the enum member
+send_gdb "ptype obj_with_enum.priv_enum\n"   
+gdb_expect {   
+   -re "type = enum ClassWithEnum::PrivEnum \\{red, green, blue, yellow = 42\\}.*$gdb_prompt $" { pass "ptype obj_with_enum.priv_enum" }
+   -re "$gdb_prompt $"                     { fail "ptype obj_with_enum.priv_enum" }
+   timeout                             { fail "(timeout) ptype obj_with_enum.priv_enum" }
+}
+
+# ptype on the object
+send_gdb "ptype obj_with_enum\n"   
+gdb_expect {   
+   -re "type = class ClassWithEnum \\{\r\n\[ \t\]*public:\r\n\[ \t\]*enum ClassWithEnum::PrivEnum priv_enum;\r\n\[ \t\]*int x;\r\n\\}\r\n$gdb_prompt $" { pass "ptype obj_with_enum" }
+   -re "$gdb_prompt $"                     { fail "ptype obj_with_enum" }
+   timeout                             { fail "(timeout) ptype obj_with_enum" }
+}
+
+send_gdb "print (ClassWithEnum::PrivEnum) 42\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = yellow.*$gdb_prompt $" { pass "print (ClassWithEnum::PrivEnum) 42" }
+   -re "$gdb_prompt $"                     { fail "print (ClassWithEnum::PrivEnum) 42" }
+   timeout                             { fail "(timeout) print (ClassWithEnum::PrivEnum) 42" }
+}
+
+
+send_gdb "maint demangle inheritance1__Fv\n"
+gdb_expect {
+   -re "inheritance1\\(void\\).*$gdb_prompt $" { pass "demangle" }
+   -re ".*$gdb_prompt $"   { fail "demangle" }
+   timeout           { fail "(timeout) demangle" }
+}
+
diff --git a/gdb/testsuite/gdb.hp/compiler.c b/gdb/testsuite/gdb.hp/compiler.c
new file mode 100644
index 0000000..8eb0d47
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/compiler.c
@@ -0,0 +1,31 @@
+/* Often the behavior of any particular test depends upon what compiler was
+   used to compile the test.  As each test is compiled, this file is
+   preprocessed by the same compiler used to compile that specific test
+   (different tests might be compiled by different compilers, particularly
+   if compiled at different times), and used to generate a *.ci (compiler
+   info) file for that test.
+
+   I.E., when callfuncs is compiled, a callfuncs.ci file will be generated,
+   which can then be sourced by callfuncs.exp to give callfuncs.exp access
+   to information about the compilation environment.
+
+   TODO:  It might be a good idea to add expect code that tests each
+   definition made with 'set" to see if one already exists, and if so
+   warn about conflicts if it is being set to something else.  */
+
+/* This needs to be kept in sync with whatis.c and gdb.exp(get_compiler_info).
+   If this ends up being hairy, we could use a common header file.  */
+
+#if defined (__STDC__) || defined (_AIX)
+set signed_keyword_not_used 0
+#else
+set signed_keyword_not_used 1
+#endif
+
+#if defined (__GNUC__)
+set gcc_compiled __GNUC__
+#else
+set gcc_compiled 0
+#endif
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/compiler.cc b/gdb/testsuite/gdb.hp/compiler.cc
new file mode 100644
index 0000000..aa35c75
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/compiler.cc
@@ -0,0 +1,34 @@
+/* Often the behavior of any particular test depends upon what compiler was
+   used to compile the test.  As each test is compiled, this file is
+   preprocessed by the same compiler used to compile that specific test
+   (different tests might be compiled by different compilers, particularly
+   if compiled at different times), and used to generate a *.ci (compiler
+   info) file for that test.
+
+   I.E., when callfuncs is compiled, a callfuncs.ci file will be generated,
+   which can then be sourced by callfuncs.exp to give callfuncs.exp access
+   to information about the compilation environment.
+
+   TODO:  It might be a good idea to add expect code that tests each
+   definition made with 'set" to see if one already exists, and if so
+   warn about conflicts if it is being set to something else.  */
+
+#if defined(__GNUC__) && __GNUC__ >= 2 && __GNUC_MINOR__ >= 6
+set supports_template_debugging 1
+#else
+set supports_template_debugging 0
+#endif
+
+#if defined(__cplusplus) 
+set supports_template_debugging 1
+#else
+set supports_template_debugging 0
+#endif
+
+#if defined (__GNUC__)
+set gcc_compiled __GNUC__
+#else
+set gcc_compiled 0
+#endif
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/ctti-add.cc b/gdb/testsuite/gdb.hp/ctti-add.cc
new file mode 100644
index 0000000..1f50fae
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ctti-add.cc
@@ -0,0 +1,29 @@
+template<class T> T add(T v1, T v2)
+{
+   T v3;
+   v3 = v1;
+   v3 += v2;
+   return v3;
+ }
+
+int main()
+{
+  char c;
+  int i;
+  float f;
+  extern void add1();
+  extern void subr2();
+  extern void subr3();
+  
+  c = 'a';
+  i = 2;
+  f = 4.5;
+
+  c = add(c, c);
+  i = add(i, i);
+  f = add(f, f);
+
+  add1();
+  subr2();
+  subr3();
+}
diff --git a/gdb/testsuite/gdb.hp/ctti-add1.cc b/gdb/testsuite/gdb.hp/ctti-add1.cc
new file mode 100644
index 0000000..7113ece
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ctti-add1.cc
@@ -0,0 +1,16 @@
+template<class T> T add(T v1, T v2);
+
+void add1()
+{
+  char c;
+  int i;
+  float f;
+  
+  c = 'b';
+  i = 3;
+  f = 6.5;
+
+  c = add(c, c);
+  i = add(i, i);
+  f = add(f, f);
+}
diff --git a/gdb/testsuite/gdb.hp/ctti-add2.cc b/gdb/testsuite/gdb.hp/ctti-add2.cc
new file mode 100644
index 0000000..d0d9891
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ctti-add2.cc
@@ -0,0 +1,22 @@
+template<class T> T add2(T v1, T v2)
+{
+   T v3;
+   v3 = v1;
+   v3 += v2;
+   return v3;
+}
+
+void subr2()
+{
+  char c;
+  int i;
+  float f;
+  
+  c = 'b';
+  i = 3;
+  f = 6.5;
+
+  c = add2(c, c);
+  i = add2(i, i);
+  f = add2(f, f);
+}
diff --git a/gdb/testsuite/gdb.hp/ctti-add3.cc b/gdb/testsuite/gdb.hp/ctti-add3.cc
new file mode 100644
index 0000000..7ba1b01
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ctti-add3.cc
@@ -0,0 +1,33 @@
+template<class T> T add3(T v1, T v2)
+{
+   T v3;
+   v3 = v1;
+   v3 += v2;
+   return v3;
+}
+
+template<class T> T add4(T v1, T v2)
+{
+   T v3;
+   v3 = v1;
+   v3 += v2;
+   return v3;
+}
+
+void subr3()
+{
+  char c;
+  int i;
+  float f;
+  
+  c = 'b';
+  i = 3;
+  f = 6.5;
+
+  c = add3(c, c);
+  i = add3(i, i);
+  f = add3(f, f);
+  c = add4(c, c);
+  i = add4(i, i);
+  f = add4(f, f);
+}
diff --git a/gdb/testsuite/gdb.hp/ctti.exp b/gdb/testsuite/gdb.hp/ctti.exp
new file mode 100644
index 0000000..e53210d
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/ctti.exp
@@ -0,0 +1,269 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+# This file is part of the gdb testsuite
+# file written by Elena Zannoni (ezannoni@cygnus.com)
+#
+# source files ctti-add.cc, ctti-add1.cc, ctti-add2.cc, ctti-add3.cc
+#
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set testfile "ctti-add"
+set srcfile  ${testfile}.cc
+set srcfile1 ${testfile}1.cc
+set srcfile2 ${testfile}2.cc
+set srcfile3 ${testfile}3.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+#if  { [gdb_compile "${srcdir}/${subdir}/${srcfile} ${srcdir}/${subdir}/${srcfile1} ${srcdir}/${subdir}/${srcfile2} ${srcdir}/${subdir}/${srcfile3}" "${binfile}" executable {debug c++}] != "" } {
+#     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+#}
+
+set cmdline "$CXX ${srcdir}/${subdir}/${srcfile} ${srcdir}/${subdir}/${srcfile1} ${srcdir}/${subdir}/${srcfile2} ${srcdir}/${subdir}/${srcfile3} -g -o ${binfile}"
+
+remote_exec build $cmdline
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*i = 2;.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*f = 4.5;.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*c = add\\(c, c\\);.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*i = add\\(i, i\\);.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*f = add\\(f, f\\);.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+send_gdb "n\n"
+gdb_expect {
+    -re "$decimal.*add1\\(\\);.*$gdb_prompt $" {
+        pass "next "
+      }
+    -re ".*$gdb_prompt $" { fail "next " }
+    timeout           { fail "next " }
+  }
+
+send_gdb "print c\n"
+gdb_expect {
+    -re ".$decimal = -62.*\r\n$gdb_prompt $" {
+        pass "print value of c"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of c" }
+    timeout           { fail "(timeout) print value of c" }
+  }
+
+
+send_gdb "print f\n"
+gdb_expect {
+    -re ".$decimal = 9\r\n$gdb_prompt $" {
+        pass "print value of f"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of f" }
+    timeout           { fail "(timeout) print value of f" }
+  }
+
+
+send_gdb "print i\n"
+gdb_expect {
+    -re ".$decimal = 4\r\n$gdb_prompt $" {
+        pass "print value of i"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of i" }
+    timeout           { fail "(timeout) print value of i" }
+  }
+
+
+
+send_gdb "print add<int>(2,2)\n"
+gdb_expect {
+    -re ".$decimal = 4\r\n$gdb_prompt $" {
+        pass "print value of add<int>(2,2)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add<int>(2,2)" }
+    timeout           { fail "(timeout) print value of add<int>(2,2)" }
+  }
+
+send_gdb "print add<float>(2.3,2.3)\n"
+gdb_expect {
+    -re ".$decimal = 4\\.5\[0-9\]+\r\n$gdb_prompt $" {
+        pass "print value of add<float>(2.3,2.3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add<float>(2.3,2.3)" }
+    timeout           { fail "(timeout) print value of add<float>(2.3,2.3)" }
+  }
+
+send_gdb "print add<char>('A','A')\n"
+gdb_expect {
+    -re ".$decimal = -126.*202.\r\n$gdb_prompt $" {
+        pass "print value of add<char>('A','A')"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add<char>('A','A')" }
+    timeout           { fail "(timeout) print value of add<char>('A','A')" }
+  }
+
+
+send_gdb "print add2<int>(2,2)\n"
+gdb_expect {
+    -re ".$decimal = 4\r\n$gdb_prompt $" {
+        pass "print value of add2<int>(2,2)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add2<int>(2,2)" }
+    timeout           { fail "(timeout) print value of add2<int>(2,2)" }
+  }
+
+send_gdb "print add2<float>(2.3,2.3)\n"
+gdb_expect {
+    -re ".$decimal = 4\\.5\[0-9\]+\r\n$gdb_prompt $" {
+        pass "print value of add2<float>(2.3,2.3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add2<float>(2.3,2.3)" }
+    timeout           { fail "(timeout) print value of add2<float>(2.3,2.3)" }
+  }
+
+send_gdb "print add2<char>('A','A')\n"
+gdb_expect {
+    -re ".$decimal = -126.*202.\r\n$gdb_prompt $" {
+        pass "print value of add2<char>('A','A')"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add2<char>('A','A')" }
+    timeout           { fail "(timeout) print value of add2<char>('A','A')" }
+  }
+
+send_gdb "print add3<int>(2,2)\n"
+gdb_expect {
+    -re ".$decimal = 4\r\n$gdb_prompt $" {
+        pass "print value of add3<int>(2,2)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add3<int>(2,2)" }
+    timeout           { fail "(timeout) print value of add3<int>(2,2)" }
+  }
+
+send_gdb "print add3<float>(2.3,2.3)\n"
+gdb_expect {
+    -re ".$decimal = 4\\.5\[0-9\]+\r\n$gdb_prompt $" {
+        pass "print value of add3<float>(2.3,2.3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add3<float>(2.3,2.3)" }
+    timeout           { fail "(timeout) print value of add3<float>(2.3,2.3)" }
+  }
+
+send_gdb "print add3<char>('A','A')\n"
+gdb_expect {
+    -re ".$decimal = -126.*202.\r\n$gdb_prompt $" {
+        pass "print value of add3<char>('A','A')"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add3<char>('A','A')" }
+    timeout           { fail "(timeout) print value of add3<char>('A','A')" }
+  }
+
+send_gdb "print add4<int>(2,2)\n"
+gdb_expect {
+    -re ".$decimal = 4\r\n$gdb_prompt $" {
+        pass "print value of add4<int>(2,2)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add4<int>(2,2)" }
+    timeout           { fail "(timeout) print value of add4<int>(2,2)" }
+  }
+
+send_gdb "print add4<float>(2.3,2.3)\n"
+gdb_expect {
+    -re ".$decimal = 4\\.5\[0-9\]+\r\n$gdb_prompt $" {
+        pass "print value of add4<float>(2.3,2.3)"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add4<float>(2.3,2.3)" }
+    timeout           { fail "(timeout) print value of add4<float>(2.3,2.3)" }
+  }
+
+send_gdb "print add4<char>('A','A')\n"
+gdb_expect {
+    -re ".$decimal = -126.*202.\r\n$gdb_prompt $" {
+        pass "print value of add4<char>('A','A')"
+      }
+    -re ".*$gdb_prompt $" { fail "print value of add4<char>('A','A')" }
+    timeout           { fail "(timeout) print value of add4<char>('A','A')" }
+  }
+
+
+gdb_exit
+return 0
diff --git a/gdb/testsuite/gdb.hp/dbx.exp b/gdb/testsuite/gdb.hp/dbx.exp
new file mode 100644
index 0000000..66f24e9
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/dbx.exp
@@ -0,0 +1,222 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+
+set testfile1 "average"
+set testfile2 "sum"
+set testfile "dbx-test"
+set binfile1 ${objdir}/${subdir}/${testfile1}
+set binfile2 ${objdir}/${subdir}/${testfile2}
+set binfile ${objdir}/${subdir}/${testfile}
+
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+proc dbx_reinitialize_dir { subdir } {
+    global gdb_prompt
+
+   send_gdb "use\n"
+    gdb_expect {
+        -re "Reinitialize source path to empty.*y or n. " {
+            send_gdb "y\n"
+            gdb_expect {
+                -re "Source directories searched.*$gdb_prompt $" {
+                    send_gdb "use $subdir\n"
+                    gdb_expect {
+                        -re "Source directories searched.*$gdb_prompt $" {
+                            verbose "Dir set to $subdir"
+                        }
+                        -re ".*$gdb_prompt $" {
+                            perror "Dir \"$subdir\" failed."
+                        }
+                    }
+                }
+                -re ".*$gdb_prompt $" {
+                    perror "Dir \"$subdir\" failed."
+                }
+            }
+        }
+        -re ".*$gdb_prompt $" {
+            perror "Dir \"$subdir\" failed."
+        }
+    }
+}
+
+# In "testsuite/config/unix-gdb.exp", the routine "gdb_load"
+# is defined as "gdb_file_cmd".  The binding of "gdb_file_cmd"
+# is done at invocation time.  Before this file is processed,
+# it binds to the definition in "testsuite/lib/gdb.exp"; after
+# this file is processed, it binds to this definition.
+# TCL lets us overrides a previous routine definition without a
+# warning (isn't that special?).
+#
+# This means that tests before use "file" to load a target, and
+# tests afterwards use the pair "symbol-file" "exec-file".
+#
+# I'm leaving it as it is for now because at the moment it
+# is the only test we have of the use of the combination of
+# "symbol-file" and "exec-file" to load a debugging target (the
+# other definition uses "file". 
+#
+# Symbol-file and exec-file should be tested explicitly, not
+# as a side effect of running a particular test (in this case,
+# "testsuite/gdb.compat/dbx.exp").
+#
+#
+proc gdb_file_cmd {arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+    global spawn_id
+    upvar timeout timeout
+
+    send_gdb "symbol-file $arg\n"
+    gdb_expect {
+        -re "Reading symbols from.*done.*$gdb_prompt $" {
+            verbose "\t\tLoaded $arg into the $GDB"
+            send_gdb "exec-file $arg\n" 
+            return 0
+        }
+        -re "has no symbol-table.*$gdb_prompt $" {
+            perror "$arg wasn't compiled with \"-g\""
+            return -1
+        }
+        -re "A program is being debugged already.*Kill it.*y or n. $" {
+            send_gdb "y\n"
+                verbose "\t\tKilling previous program being debugged"
+            exp_continue
+        }
+        -re "Load new symbol table from \".*\".*y or n. $" {
+            send_gdb "y\n"
+            gdb_expect {
+                -re "Reading symbols from.*done.*$gdb_prompt $" {
+                    verbose "\t\tLoaded $arg with new symbol table into $GDB"
+                    return 0
+                }
+                timeout {
+                    perror "(timeout) Couldn't load $arg, other program already loaded."
+                    return -1
+                }
+            }
+        }
+        -re ".*No such file or directory.*$gdb_prompt $" {
+            perror "($arg) No such file or directory\n"
+            return -1
+        }
+        -re "$gdb_prompt $" {
+            perror "couldn't load $arg into $GDB."
+            return -1
+            }
+        timeout {
+            perror "couldn't load $arg into $GDB (timed out)."
+            return -1
+        }
+        eof {
+            # This is an attempt to detect a core dump, but seems not to
+            # work.  Perhaps we need to match .* followed by eof, in which
+            # expect does not seem to have a way to do that.
+            perror "couldn't load $arg into $GDB (end of file)."
+            return -1
+        }
+    }
+}
+
+#
+#test_breakpoints
+#
+proc test_breakpoints { } {
+    gdb_test "stop in main" "Breakpoint.*at.*: file.*average\.c, line 31\."
+    gdb_test "status" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:31.*"
+    gdb_test "stop at 36" "Breakpoint.*at.*: file.*average\.c, line 36.*"
+    gdb_test "stop in 36" "Usage: stop in <function . address>"
+    gdb_test "stop at main" "Usage: stop at <line>"
+}
+
+#
+#test_assign
+#
+proc test_assign { } {
+    gdb_test "run" ""
+    gdb_test "assign first=1" ""
+    gdb_test "print first" ".1 = 1"
+}
+
+#
+#test_whereis
+#
+proc test_whereis { } {
+    gdb_test "whereis my_list" "All variables matching regular expression \"my_list\":\r\n\r\nFile.*average\.c:\r\nstatic int my_list\\\[10\\\];"
+}
+
+#
+#test_func
+#
+proc test_func { } {
+    gdb_test "cont" ""
+    gdb_test "step" ""
+    gdb_test "func sum" "'sum' not within current stack frame\."
+    gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line 11\."
+    gdb_test "cont"
+    gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:17\r\n17\[ \t\]+total = sum\\(list, low, high\\);"
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+global GDBFLAGS
+set saved_gdbflags $GDBFLAGS
+
+set GDBFLAGS "$GDBFLAGS --dbx"
+gdb_start
+dbx_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+send_gdb "set width 0\n"
+gdb_expect -re "$gdb_prompt $"
+test_breakpoints
+test_assign
+test_whereis
+gdb_test "file average.c:1" "1\[ \t\]+/. This is a sample program.*"
+test_func
+
+gdb_exit
+set GDBFLAGS $saved_gdbflags
+return 0
diff --git a/gdb/testsuite/gdb.hp/exception.cc b/gdb/testsuite/gdb.hp/exception.cc
new file mode 100644
index 0000000..2745932
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/exception.cc
@@ -0,0 +1,48 @@
+// Test file for exception handling support.
+
+#include <iostream.h>
+
+int foo (int i)
+{
+  if (i < 32)
+    throw (int) 13;
+  else
+    return i * 2;
+}
+
+extern "C" int bar (int k, unsigned long eharg, int flag);
+    
+int bar (int k, unsigned long eharg, int flag)
+{
+  cout << "k is " << k << " eharg is " << eharg << " flag is " << flag << endl;
+  return 1;
+}
+
+int main()
+{
+  int j;
+
+  try {
+    j = foo (20);
+  }
+  catch (int x) {
+    cout << "Got an except " << x << endl;
+  }
+  
+  try {
+    try {
+      j = foo (20);
+    }
+    catch (int x) {
+      cout << "Got an except " << x << endl;
+      throw;
+    }
+  }
+  catch (int y) {
+    cout << "Got an except (rethrown) " << y << endl;
+  }
+
+  // Not caught 
+  foo (20);
+  
+}
diff --git a/gdb/testsuite/gdb.hp/exception.exp b/gdb/testsuite/gdb.hp/exception.exp
new file mode 100644
index 0000000..4cafbdc
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/exception.exp
@@ -0,0 +1,408 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+#
+# tests for exception-handling support
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-23
+
+# This file is part of the gdb testsuite
+
+# Note: These tests are geared to the HP aCC compiler,
+# which has an idiosyncratic way of emitting debug info
+# for exceptions -- it uses a callback mechanism, which
+# is different from the way g++ records exception info
+# for debugging
+
+# The tests are in two parts; the first part deals with
+# statically linked (archive-bound) executables, and the
+# second part repeats those tests with dynamically linked
+# (shared bound) executables.  (In the latter case we use
+# a different mechanism to get the address of the notification
+# hook in the C++ support library.) The tests themselves are
+# the same in both parts.
+# 
+# IMPORTANT:
+# ---------
+# IF YOU CHANGE A TEST IN ONE PART MAKE SURE YOU CHANGE IT
+# --------------------------------------------------------
+# IN THE OTHER PART TOO!
+# ----------------------
+
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+
+#
+# test running programs
+#
+
+# Part I : Archive-bound executables
+# ----------------------------------
+
+set testfile "exception"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+ 
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+set cmdline "$CXX ${srcdir}/${subdir}/${srcfile} +A -Wl,-a,archive -g -o ${binfile}"
+
+remote_exec build $cmdline
+
+# Start with a fresh gdb
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+# Set a catch catchpoint
+
+send_gdb "catch catch\n"
+gdb_expect {
+   -re "Catchpoint \[0-9\]* \\(catch\\)\r\n$gdb_prompt $" {
+       pass "catch catch (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "catch catch  (static executable)" }
+   timeout { fail "(timeout) catch catch  (static executable)" }
+}
+
+# Set a throw catchpoint
+
+send_gdb "catch throw\n"
+gdb_expect {
+   -re "Catchpoint \[0-9\]* \\(throw\\)\r\n$gdb_prompt $" {
+       pass "catch throw (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "catch throw (static executable)" }
+   timeout { fail "(timeout) catch throw (static executable)" }
+}
+
+# The catchpoints should be listed in the list of breakpoints.
+
+send_gdb "info break\n"
+gdb_expect {
+   -re ".*\[0-9\]*\[ \]*catch catch\[ \]*keep y\[ \]*exception catch\[ \]*\r\n\[0-9\]*\[ \]*catch throw\[ \]*keep y\[ \]*exception throw\[ \]*\r\n$gdb_prompt $" {
+       pass "info break with catchpoints (static executable)"
+   }    
+   -re ".*$gdb_prompt $" { fail "info break (static executable)" }
+   timeout { fail "(timeout) info break (static executable)" }
+}
+
+# Info catch currently does not work with HP aCC. No easy way to
+# list the active handlers on the stack.
+
+send_gdb "info catch\n"
+gdb_expect {
+   -re "Info catch not supported with this target/compiler combination.\r\n$gdb_prompt $" {
+       pass "info catch (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "info catch (static executable)" }
+   timeout { fail "(timeout) info catch (static executable)" }
+}
+
+# Get the first exception thrown
+       
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:28\r\n.*$gdb_prompt $" {
+      pass "caught a throw (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a throw (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a throw? (static executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_THROW.*\r\n#2\[ \]*$hex in __eh_notify_throw.*\r\n#3\[ \]*$hex in foo \\(i=20\\) at .*exception\\.cc:8\r\n#4\[ \]*$hex in main.* at .*exception\\.cc:26\r\n$gdb_prompt $" {
+      pass "backtrace after throw (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after throw (static executable)" }
+   timeout { fail "(timeout) backtrace after throw (static executable)" }
+}
+
+# Now intercept it when it is caught.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:28\r\n.*$gdb_prompt $" {
+      pass "caught a catch (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch? (static executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_CATCH.*\r\n.*\r\n#3\[ \]*$hex in __throw__.*\r\n#4\[ \]*$hex in foo \\(i=20\\) at .*exception.cc:8\r\n#5\[ \]*$hex in main.* at .*exception.cc:26\r\n$gdb_prompt $" {
+      pass "backtrace after catch (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after catch (static executable)" }
+   timeout { fail "(timeout) backtrace after catch (static executable)" }
+}
+      
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:36\r\n.*$gdb_prompt $" {
+      pass "caught a throw (2) (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a throw (2) (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a throw (2)? (static executable)" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:36\r\n.*$gdb_prompt $" {
+      pass "caught a catch (2) (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (2) (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch (2)? (static executable)" }
+}
+
+# Now the exception will be rethrown.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:38, catch location .*exception\\.cc:41\r\n.*$gdb_prompt $" {
+      pass "caught a rethrow (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a rethrow (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a rethrow? (static executable)" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:38, catch location .*exception\\.cc:41\r\n.*$gdb_prompt $" {
+      pass "caught a catch (3) (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (3) (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch (3)? (static executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_CATCH.*\r\n.*\r\n#3\[ \]*$hex in __rethrow.*\r\n#4\[ \]*$hex in main.* at .*exception\\.cc:38\r\n#5\[ \]*$hex in foo \\(i=20\\) at .*exception.cc:8\r\n#6\[ \]*$hex in main.* at .*exception.cc:34\r\n$gdb_prompt $" {
+      pass "backtrace after catch (3) (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after catch (3) (static executable)" }
+   timeout { fail "(timeout) backtrace after catch (3) (static executable)" }
+}
+
+# Now the exception will be thrown, but not catch-able anywhere.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location unknown\r\n.*$gdb_prompt $" {
+      pass "caught an uncatchable throw (static executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch an uncatchable throw (static executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch an uncatchable throw? (static executable)" }
+}
+
+# Part II : Shared-bound executables
+# ----------------------------------
+
+# Start with a fresh gdb
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set prms_id 0
+set bug_id 0
+
+set testfile "exception"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will a
+utomatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+# Set a catch catchpoint
+
+send_gdb "catch catch\n"
+gdb_expect {
+   -re "Catchpoint \[0-9\]* \\(catch\\)\r\n$gdb_prompt $" {
+       pass "catch catch (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "catch catch  (dynamic executable)" }
+   timeout { fail "(timeout) catch catch  (dynamic executable)" }
+}
+
+# Set a throw catchpoint
+
+send_gdb "catch throw\n"
+gdb_expect {
+   -re "Catchpoint \[0-9\]* \\(throw\\)\r\n$gdb_prompt $" {
+       pass "catch throw (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "catch throw (dynamic executable)" }
+   timeout { fail "(timeout) catch throw (dynamic executable)" }
+}
+
+# The catchpoints should be listed in the list of breakpoints.
+
+send_gdb "info break\n"
+gdb_expect {
+   -re ".*\[0-9\]*\[ \]*catch catch\[ \]*keep y\[ \]*exception catch\[ \]*\r\n\[0-9\]*\[ \]*catch throw\[ \]*keep y\[ \]*exception throw\[ \]*\r\n$gdb_prompt $" {
+       pass "info break with catchpoints (dynamic executable)"
+   }    
+   -re ".*$gdb_prompt $" { fail "info break (dynamic executable)" }
+   timeout { fail "(timeout) info break (dynamic executable)" }
+}
+
+# Info catch currently does not work with HP aCC. No easy way to
+# list the active handlers on the stack.
+
+send_gdb "info catch\n"
+gdb_expect {
+   -re "Info catch not supported with this target/compiler combination.\r\n$gdb_prompt $" {
+       pass "info catch (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "info catch (dynamic executable)" }
+   timeout { fail "(timeout) info catch (dynamic executable)" }
+}
+
+# Get the first exception thrown
+       
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:28\r\n.*$gdb_prompt $" {
+      pass "caught a throw (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a throw (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a throw? (dynamic executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_THROW.*\r\n#2\[ \]*$hex in __eh_notify_throw.*\r\n#3\[ \]*$hex in foo \\(i=20\\) at .*exception\\.cc:8\r\n#4\[ \]*$hex in main.* at .*exception\\.cc:26\r\n$gdb_prompt $" {
+      pass "backtrace after throw (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after throw (dynamic executable)" }
+   timeout { fail "(timeout) backtrace after throw (dynamic executable)" }
+}
+
+# Now intercept it when it is caught.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:28\r\n.*$gdb_prompt $" {
+      pass "caught a catch (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch? (dynamic executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_CATCH.*\r\n.*\r\n#3\[ \]*$hex in __throw__.*\r\n#4\[ \]*$hex in foo \\(i=20\\) at .*exception.cc:8\r\n#5\[ \]*$hex in main.* at .*exception.cc:26\r\n$gdb_prompt $" {
+      pass "backtrace after catch (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after catch (dynamic executable)" }
+   timeout { fail "(timeout) backtrace after catch (dynamic executable)" }
+}
+      
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:36\r\n.*$gdb_prompt $" {
+      pass "caught a throw (2) (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a throw (2) (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a throw (2)? (dynamic executable)" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:8, catch location .*exception\\.cc:36\r\n.*$gdb_prompt $" {
+      pass "caught a catch (2) (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (2) (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch (2)? (dynamic executable)" }
+}
+
+# Now the exception will be rethrown.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:38, catch location .*exception\\.cc:41\r\n.*$gdb_prompt $" {
+      pass "caught a rethrow (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a rethrow (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a rethrow? (dynamic executable)" }
+}
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing.*Catchpoint \[0-9\]* \\(exception caught\\), throw location.*exception\\.cc:38, catch location .*exception\\.cc:41\r\n.*$gdb_prompt $" {
+      pass "caught a catch (3) (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch a catch (3) (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch a catch (3)? (dynamic executable)" }
+}
+
+send_gdb "backtrace\n"
+gdb_expect {
+   -re "#0\[ \]*__d_eh_break.*\r\n#1\[ \]*$hex in __d_eh_notify_callback \\(eh_type=__EH_NOTIFY_CATCH.*\r\n.*\r\n#3\[ \]*$hex in __rethrow.*\r\n#4\[ \]*$hex in main.* at .*exception\\.cc:38\r\n#5\[ \]*$hex in foo \\(i=20\\) at .*exception.cc:8\r\n#6\[ \]*$hex in main.* at .*exception.cc:34\r\n$gdb_prompt $" {
+      pass "backtrace after catch (3) (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "backtrace after catch (3) (dynamic executable)" }
+   timeout { fail "(timeout) backtrace after catch (3) (dynamic executable)" }
+}
+
+# Now the exception will be thrown, but not catch-able anywhere.
+
+send_gdb "continue\n"
+gdb_expect {
+   -re "Continuing\\.\r\nGot.*\r\nCatchpoint \[0-9\]* \\(exception thrown\\), throw location.*exception\\.cc:8, catch location unknown\r\n.*$gdb_prompt $" {
+      pass "caught an uncatchable throw (dynamic executable)"
+   }
+   -re ".*$gdb_prompt $" { fail "didn't catch an uncatchable throw (dynamic executable)" }
+   timeout { fail "(timeout) after continue -- didn't catch an uncatchable throw? (dynamic executable)" }
+}
+
diff --git a/gdb/testsuite/gdb.hp/execd-program.c b/gdb/testsuite/gdb.hp/execd-program.c
new file mode 100644
index 0000000..0320991
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/execd-program.c
@@ -0,0 +1,28 @@
+#include <stdio.h>
+
+/* There is a global_i in follow_exec, which exec's us.  We
+   should not be able to see that other definition of global_i
+   after we are exec'd.
+   */
+int  global_i = 0;
+
+main (argc, argv)
+  int  argc;
+  char *  argv[];
+{
+  /* There is a local_j in follow_exec, which exec's us.  We
+     should not be able to see that other definition of local_j
+     after we are exec'd.
+     */
+  int  local_j = argc;
+  char *  s;
+
+  printf ("Hello from execd_program...\n");
+  if (argc != 2)
+    {
+      printf ("expected one string argument\n");
+      exit (-1);
+    }
+  s = argv[1];
+  printf ("argument received: %s\n", s);
+}
diff --git a/gdb/testsuite/gdb.hp/foll-exec.c b/gdb/testsuite/gdb.hp/foll-exec.c
new file mode 100644
index 0000000..c51fa52
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-exec.c
@@ -0,0 +1,35 @@
+#include <stdio.h>
+
+int  global_i = 100;
+
+main ()
+{
+  int  local_j = global_i+1;
+  int  local_k = local_j+1;
+
+  printf ("follow-exec is about to execlp(execd-program)...\n");
+
+  execlp ("gdb.hp/execd-program",
+          "gdb.hp/execd-program",
+          "execlp arg1 from follow-exec",
+          (char *)0);
+
+  printf ("follow-exec is about to execl(execd-program)...\n");
+
+  execl ("gdb.hp/execd-program",
+         "gdb.hp/execd-program",
+         "execl arg1 from follow-exec",
+         "execl arg2 from follow-exec",
+         (char *)0);
+
+  {
+    static char * argv[] = {
+      "gdb.hp/execd-program",
+      "execv arg1 from follow-exec",
+      0};
+
+    printf ("follow-exec is about to execv(execd-program)...\n");
+
+    execv ("gdb.hp/execd-program", argv);
+  }
+}
diff --git a/gdb/testsuite/gdb.hp/foll-exec.exp b/gdb/testsuite/gdb.hp/foll-exec.exp
new file mode 100644
index 0000000..f7d6089
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-exec.exp
@@ -0,0 +1,412 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if {![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"]} {
+    #setup_xfail "*-*.*"
+    return 0
+}
+
+set testfile "foll-exec"
+set testfile2 "execd-program"
+set srcfile ${testfile}.c
+set srcfile2 ${testfile2}.c
+set binfile ${objdir}/${subdir}/${testfile}
+set binfile2 ${objdir}/${subdir}/${testfile2}
+
+# build the first test case
+#if  { [compile "-g -DNO_PROTOTYPES ${srcdir}/${subdir}/${srcfile2} -o ${binfile2} "] != "" } {
+#  perror "Couldn't compile ${srcfile2}"
+#  return -1
+#}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#if  { [compile "-g ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#    execute_anywhere "rm -f ${objdir}/${subdir}/${testfile}.tmp"
+    # built the second test case since we can't use prototypes
+#    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+#    execute_anywhere "echo set prototypes 0 > ${objdir}/${subdir}/${testfile}.tmp"
+#    if  { [compile "-g -DNO_PROTOTYPES ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#	perror "Couldn't compile ${testfile}.c"
+#	return -1
+#    }
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+# Until "catch exec" is implemented on other targets...
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+   setup_xfail "*-*-*"
+}
+
+proc zap_session {} {
+   global gdb_prompt
+   global binfile
+
+   send_gdb "kill\n"
+   gdb_expect {
+     -re ".*Kill the program being debugged.*y or n. $" {
+       send_gdb "y\n"
+       send_gdb "file $binfile\n"
+       gdb_expect {
+         -re ".*Load new symbol table from.*y or n. $" {
+           send_gdb "y\n"
+           gdb_expect {
+             -re "Reading symbols from.*$gdb_prompt $" {}
+             timeout { fail "loading symbols (timeout)"; return }
+           }
+         }
+         -re ".*gdb_prompt $" {}
+         timeout { fail "loading symbols (timeout)"; return }
+       }
+    }
+    -re ".*$gdb_prompt $" {}
+    timeout { fail "killing inferior (timeout)" ; return }
+   }
+}
+
+proc do_exec_tests {} {
+   global gdb_prompt
+   global binfile
+   global srcfile
+   global srcfile2
+   global testfile
+   global testfile2
+
+   # Start the program running, and stop at main.
+   #
+   if ![runto_main] then {
+     perror "Couldn't run ${testfile}"
+     return
+   }
+
+   # Verify that we can see various global and local variables
+   # in this program, and that they have expected values.  Some
+   # of these variables are also declared in the program we'll
+   # exec in a moment.
+   #
+   send_gdb "next 3\n"
+   gdb_expect {
+     -re "12.*execlp.*$gdb_prompt $"\
+                     {pass "step to exec call"}
+     -re "$gdb_prompt $" {fail "step to exec call"}
+     timeout         {fail "(timeout) step to exec call"}
+   }
+   send_gdb "print global_i\n"
+   gdb_expect {
+     -re ".* = 100.*$gdb_prompt $"\
+                     {pass "print follow-exec/global_i"}
+     -re "$gdb_prompt $" {fail "print follow-exec/global_i"}
+     timeout         {fail "(timeout) print follow-exec/global_i"}
+   }
+   send_gdb "print local_j\n"
+   gdb_expect {
+     -re ".* = 101.*$gdb_prompt $"\
+                     {pass "print follow-exec/local_j"}
+     -re "$gdb_prompt $" {fail "print follow-exec/local_j"}
+     timeout         {fail "(timeout) print follow-exec/local_j"}
+   }
+   send_gdb "print local_k\n"
+   gdb_expect {
+     -re ".* = 102.*$gdb_prompt $"\
+                     {pass "print follow-exec/local_k"}
+     -re "$gdb_prompt $" {fail "print follow-exec/local_k"}
+     timeout         {fail "(timeout) print follow-exec/local_k"}
+   }
+
+   # Try stepping through an execlp call, without catching it.
+   # We should stop in execd-program, at its first statement.
+   #
+   send_gdb "next\n"
+   gdb_expect {
+     -re "Executing new program: .*${testfile2}.*${srcfile2}:17.*int  local_j = argc;.*$gdb_prompt $"\
+                     {pass "step through execlp call"}
+     -re "$gdb_prompt $" {fail "step through execlp call"}
+     timeout         {fail "(timeout) step through execlp call"}
+   }
+
+   # Verify that we can see the variables defined in the newly-exec'd
+   # program, and CANNOT see those defined in the exec'ing program.
+   #
+   send_gdb "next\n"
+   gdb_expect {
+     -re "20.*printf.*$gdb_prompt $"\
+                     {pass "step after execlp call"}
+     -re "$gdb_prompt $" {fail "step after execlp call"}
+     timeout         {fail "(timeout) step after execlp call"}
+   }
+   send_gdb "print global_i\n"
+   gdb_expect {
+     -re ".* = 0.*$gdb_prompt $"\
+                     {pass "print execd-program/global_i (after execlp)"}
+     -re "$gdb_prompt $" {fail "print execd-program/global_i (after execlp)"}
+     timeout         {fail "(timeout) print execd-program/global_i (after execlp)"}
+   }
+   send_gdb "print local_j\n"
+   gdb_expect {
+     -re ".* = 2.*$gdb_prompt $"\
+                     {pass "print execd-program/local_j (after execlp)"}
+     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execlp)"}
+     timeout         {fail "(timeout) print execd-program/local_j (after execlp)"}
+   }
+   send_gdb "print local_k\n"
+   gdb_expect {
+     -re "No symbol \"local_k\" in current context.*$gdb_prompt $"\
+                     {pass "print follow-exec/local_k (after execlp)"}
+     -re "$gdb_prompt $" {fail "print follow-exec/local_k (after execlp)"}
+     timeout         {fail "(timeout) print follow-exec/local_k (after execlp)"}
+   }
+
+   # Explicitly kill this program, or a subsequent rerun actually runs
+   # the exec'd program, not the original program...
+   zap_session
+
+   # Start the program running, and stop at main.
+   #
+   if ![runto_main] then {
+     perror "Couldn't run ${testfile} (2nd try)"
+     return
+   }
+
+   # Verify that we can catch an exec event, and then continue
+   # to follow through the exec.  (Since there's a breakpoint on
+   # "main", it'll also be transferred to the exec'd program,
+   # and we expect to stop there.)
+   #
+   send_gdb "catch exec\n"
+   gdb_expect {
+     -re "Catchpoint .*(exec).*$gdb_prompt $"\
+                     {pass "set catch exec"}
+     -re "$gdb_prompt $" {fail "set catch exec"}
+     timeout         {fail "(timeout) set catch exec"}
+   }
+
+   # Verify that the catchpoint is mentioned in an "info breakpoints",
+   # and further that the catchpoint mentions no program name.
+   #
+   send_gdb "info breakpoints\n"
+   gdb_expect {
+     -re ".*catch exec.*keep y.*$gdb_prompt $"\
+                     {pass "info shows catchpoint without exec pathname"}
+     -re ".*catch exec.*program \"\".*$gdb_prompt $"\
+                     {fail "info shows catchpoint without exec pathname"}
+     -re "$gdb_prompt $" {fail "info shows catchpoint without exec pathname"}
+     timeout         {fail "(timeout) info shows catchpoint without exec pathname"}
+   }
+
+   send_gdb "continue\n"
+   gdb_expect {
+     -re ".*Executing new program:.*${testfile2}.*Catchpoint .*(exec\'d .*${testfile2}).*in .START..*$gdb_prompt $"\
+                     {pass "hit catch exec"}
+     -re "$gdb_prompt $" {fail "hit catch exec"}
+     timeout         {fail "(timeout) hit catch exec"}
+   }
+
+   # Verify that the catchpoint is mentioned in an "info breakpoints",
+   # and further that the catchpoint managed to capture the exec'd
+   # program's name.
+   #
+   send_gdb "info breakpoints\n"
+   gdb_expect {
+     -re ".*catch exec .*program \".*${testfile2}\".*$gdb_prompt $"\
+                     {pass "info shows catchpoint exec pathname"}
+     -re "$gdb_prompt $" {fail "info shows catchpoint exec pathname"}
+     timeout         {fail "(timeout) info shows catchpoint exec pathname"}
+   }
+
+   # Verify that we can continue from the catchpoint, and land in the
+   # main of the newly-exec'd program.
+   #
+   send_gdb "continue\n"
+   gdb_expect {
+     -re ".*${srcfile2}:17.*$gdb_prompt $"\
+                     {pass "continue after hit catch exec"}
+     -re "$gdb_prompt $" {fail "continue after hit catch exec"}
+     timeout         {fail "(timeout) continue after hit catch exec"}
+   }
+
+   # Explicitly kill this program, or a subsequent rerun actually runs
+   # the exec'd program, not the original program...
+   zap_session
+
+   # Start the program running, and stop at main.
+   #
+   if ![runto_main] then {
+     perror "Couldn't run ${testfile} (3rd try)"
+     return
+   }
+
+   # Verify that we can follow through follow an execl()
+   # call.  (We must jump around earlier exec* calls.)
+   #
+   send_gdb "tbreak 19\n"
+   gdb_expect {
+     -re "Breakpoint .*file .*${srcfile}, line 19.*$gdb_prompt $"\
+                     {pass "prepare to jump to execl call"}
+     -re "$gdb_prompt $" {fail "prepare to jump to execl call"}
+     timeout         {fail "(timeout) prepare to jump to execl call"}
+   }
+   send_gdb "jump 19\n"
+   gdb_expect {
+     -re "main.* at .*${srcfile}:19.*$gdb_prompt $"\
+                     {pass "jump to execl call"}
+     -re "$gdb_prompt $" {fail "jump to execl call"}
+     timeout         {fail "(timeout) jump to execl call"}
+   }
+   # Note that stepping through an exec call causes the step-count
+   # to be reset to zero.  I.e.: you may specify "next 2" at the
+   # call, but you'll actually stop at the first breakpoint set in
+   # the newly-exec'd program, not after the remaining step-count
+   # reaches zero.
+   #
+   send_gdb "next 2\n"
+   gdb_expect {
+     -re "Executing new program: .*${testfile2}.*${srcfile2}:17.*int  local_j = argc;.*$gdb_prompt $"\
+                     {pass "step through execl call"}
+     -re "$gdb_prompt $" {fail "step through execl call"}
+     timeout         {fail "(timeout) step through execl call"}
+   }
+   send_gdb "next\n"
+   gdb_expect {
+     -re "20.*printf.*$gdb_prompt $"\
+                     {pass "step after execl call"}
+     -re "$gdb_prompt $" {fail "step after execl call"}
+     timeout         {fail "(timeout) step after execl call"}
+   }
+
+   # Verify that we can print a local variable (which happens to be
+   # assigned the value of main's argc).
+   #
+   send_gdb "print local_j\n"
+   gdb_expect {
+     -re ".* = 3.*$gdb_prompt $"\
+                     {pass "print execd-program/local_j (after execl)"}
+     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execl)"}
+     timeout         {fail "(timeout) print execd-program/local_j (after execl)"}
+   }
+
+   # Explicitly kill this program, or a subsequent rerun actually runs
+   # the exec'd program, not the original program...
+   zap_session
+
+   # Start the program running, and stop at main.
+   #
+   if ![runto_main] then {
+     perror "Couldn't run ${testfile} (4th try)"
+     return
+   }
+
+   # Verify that we can follow through follow an execv()
+   # call.  (We must jump around earlier exec* calls.)
+   #
+   send_gdb "tbreak 33\n"
+   gdb_expect {
+     -re "Breakpoint .*file .*${srcfile}, line 33.*$gdb_prompt $"\
+                     {pass "prepare to jump to execv call"}
+     -re "$gdb_prompt $" {fail "prepare to jump to execv call"}
+     timeout         {fail "(timeout) prepare to jump to execv call"}
+   }
+   send_gdb "jump 33\n"
+   gdb_expect {
+     -re "main.* at .*${srcfile}:33.*$gdb_prompt $"\
+                     {pass "jump to execv call"}
+     -re "$gdb_prompt $" {fail "jump to execv call"}
+     timeout         {fail "(timeout) jump to execv call"}
+   }
+   send_gdb "next\n"
+   gdb_expect {
+     -re "Executing new program: .*${testfile2}.*${srcfile2}:17.*int  local_j = argc;.*$gdb_prompt $"\
+                     {pass "step through execv call"}
+     -re "$gdb_prompt $" {fail "step through execv call"}
+     timeout         {fail "(timeout) step through execv call"}
+   }
+   send_gdb "next\n"
+   gdb_expect {
+     -re "20.*printf.*$gdb_prompt $"\
+                     {pass "step after execv call"}
+     -re "$gdb_prompt $" {fail "step after execv call"}
+     timeout         {fail "(timeout) step after execv call"}
+   }
+
+   # Verify that we can print a local variable (which happens to be
+   # assigned the value of main's argc).
+   #
+   send_gdb "print local_j\n"
+   gdb_expect {
+     -re ".* = 2.*$gdb_prompt $"\
+                     {pass "print execd-program/local_j (after execv)"}
+     -re "$gdb_prompt $" {fail "print execd-program/local_j (after execv)"}
+     timeout         {fail "(timeout) print execd-program/local_j (after execv)"}
+   }
+
+   # Explicitly kill this program, or a subsequent rerun actually runs
+   # the exec'd program, not the original program...
+   zap_session
+
+   # Start the program running, and stop at main.
+   #
+   if ![runto_main] then {
+     perror "Couldn't run ${testfile} (4th try)"
+     return
+   }
+
+   # Verify that we can just continue and thereby follow through an
+   # exec call.  (Since the breakpoint on "main" is reset, we should
+   # just stop in main of the newly-exec'd program.)
+   #
+   send_gdb "continue\n"
+   gdb_expect {
+     -re "Executing new program: .*${testfile2}.*${srcfile2}:17.*int  local_j = argc;.*$gdb_prompt $"\
+                     {pass "continue through exec"}
+     -re "$gdb_prompt $" {fail "continue through exec"}
+     timeout         {fail "(timeout) continue through exec"}
+   }
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+# This is a test of gdb's ability to follow a process through a
+# Unix exec() system call.
+#
+do_exec_tests
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/foll-fork.c b/gdb/testsuite/gdb.hp/foll-fork.c
new file mode 100644
index 0000000..89f92ae
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-fork.c
@@ -0,0 +1,25 @@
+#include <stdio.h>
+
+void callee (i)
+  int  i;
+{
+  printf("callee: %d\n", i);
+}
+
+main ()
+{
+  int  pid;
+  int  v = 5;
+
+  pid = fork ();
+  if (pid == 0)
+    {
+      v++;
+      /* printf ("I'm the child!\n"); */
+    }
+  else
+    {
+      v--;
+      /* printf ("I'm the proud parent of child #%d!\n", pid); */
+    }
+}
diff --git a/gdb/testsuite/gdb.hp/foll-fork.exp b/gdb/testsuite/gdb.hp/foll-fork.exp
new file mode 100644
index 0000000..7231764
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-fork.exp
@@ -0,0 +1,385 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if {![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"]} {
+    #setup_xfail "*-*.*"
+    return 0
+}
+
+set testfile "foll-fork"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+#if  { [compile "-g ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#    execute_anywhere "rm -f ${objdir}/${subdir}/${testfile}.tmp"
+    # built the second test case since we can't use prototypes
+#    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+#    execute_anywhere "echo set prototypes 0 > ${objdir}/${subdir}/${testfile}.tmp"
+#    if  { [compile "-g -DNO_PROTOTYPES ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#	perror "Couldn't compile ${testfile}.c"
+#	return -1
+#    }
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+
+# Until "set follow-fork-mode" and "catch fork" are implemented on
+# other targets...
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+   setup_xfail "*-*-*"
+}
+
+proc default_fork_parent_follow {} {
+   global gdb_prompt
+
+   send_gdb "show follow\n"
+   gdb_expect {
+      -re "Debugger response to a program call of fork or vfork is \"parent\"..*$gdb_prompt $"\
+                      {pass "default show parent follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "default show parent follow, no catchpoints"}
+      timeout         {fail "(timeout) default show parent follow, no catchpoints"}
+   }
+   send_gdb "next 2\n"
+   gdb_expect {
+      -re "Detaching after fork from.*$gdb_prompt $"\
+                      {pass "default parent follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "default parent follow, no catchpoints"}
+      timeout         {fail "(timeout) default parent follow, no catchpoints" }
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc explicit_fork_parent_follow {} {
+   global gdb_prompt
+
+   send_gdb "set follow parent\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow parent"}
+      timeout         {fail "(timeout) set follow parent"}
+   }
+   send_gdb "show follow\n"
+   gdb_expect {
+      -re "Debugger response to a program call of fork or vfork is \"parent\"..*$gdb_prompt $"\
+                      {pass "explicit show parent follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "explicit show parent follow, no catchpoints"}
+      timeout         {fail "(timeout) explicit show parent follow, no catchpoints"}
+   }
+   send_gdb "next 2\n"
+   gdb_expect {
+      -re "Detaching after fork from.*$gdb_prompt $"\
+                      {pass "explicit parent follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "explicit parent follow, no catchpoints"}
+      timeout         {fail "(timeout) explicit parent follow, no catchpoints"}
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc explicit_fork_child_follow {} {
+   global gdb_prompt
+
+   send_gdb "set follow child\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow child"}
+      timeout         {fail "(timeout) set follow child"}
+   }
+   send_gdb "show follow\n"
+   gdb_expect {
+      -re "Debugger response to a program call of fork or vfork is \"child\"..*$gdb_prompt $"\
+                      {pass "explicit show child follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "explicit show child follow, no catchpoints"}
+      timeout         {fail "(timeout) explicit show child follow, no catchpoints"}
+   }
+   send_gdb "next 2\n"
+   gdb_expect {
+      -re "Detaching from program:.*Attaching after fork to.*$gdb_prompt $"\
+                      {pass "explicit child follow, no catchpoints"}
+      -re "$gdb_prompt $" {fail "explicit child follow, no catchpoints"}
+      timeout         {fail "(timeout) explicit child follow, no catchpoints"}
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any gdb_expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc catch_fork_child_follow {} {
+   global gdb_prompt
+
+   send_gdb "catch fork\n"
+   gdb_expect {
+      -re "Catchpoint .*(fork).*$gdb_prompt $"\
+                      {pass "explicit child follow, set catch fork"}
+      -re "$gdb_prompt $" {fail "explicit child follow, set catch fork"}
+      timeout         {fail "(timeout) explicit child follow, set catch fork"}
+   }
+
+   # Verify that the catchpoint is mentioned in an "info breakpoints",
+   # and further that the catchpoint mentions no process id.
+   #
+   send_gdb "info breakpoints\n"
+   gdb_expect {
+     -re ".*catch fork.*keep y.*$gdb_prompt $"\
+                     {pass "info shows catchpoint without pid"}
+     -re ".*catch fork.*process .*$gdb_prompt $"\
+                     {fail "info shows catchpoint without pid"}
+     -re "$gdb_prompt $" {fail "info shows catchpoint without pid"}
+     timeout         {fail "(timeout) info shows catchpoint without pid"}
+   }
+
+   send_gdb "continue\n"
+   gdb_expect {
+      -re "Catchpoint.*(forked process.*),.*in _fork_sys.*$gdb_prompt $"\
+                      {pass "explicit child follow, catch fork"}
+      -re "$gdb_prompt $" {fail "explicit child follow, catch fork"}
+      timeout         {fail "(timeout) explicit child follow, catch fork"}
+   }
+
+   # Verify that the catchpoint is mentioned in an "info breakpoints",
+   # and further that the catchpoint managed to capture a process id.
+   #
+   send_gdb "info breakpoints\n"
+   gdb_expect {
+     -re ".*catch fork .*process \[0-9\]+.*$gdb_prompt $"\
+                     {pass "info shows catchpoint pid"}
+     -re "$gdb_prompt $" {fail "info shows catchpoint pid"}
+     timeout         {fail "(timeout) info shows catchpoint pid"}
+   }
+
+   send_gdb "set follow child\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow child"}
+      timeout         {fail "(timeout) set follow child"}
+   }
+   send_gdb "tbreak 15\n"
+   gdb_expect {
+      -re "Breakpoint.*, line 15.*$gdb_prompt $"\
+                      {pass "set follow child, tbreak"}
+      -re "$gdb_prompt $" {fail "set follow child, tbreak"}
+      timeout         {fail "(timeout) set follow child, tbreak"}
+   }
+   send_gdb "continue\n"
+   gdb_expect {
+      -re ".*Detaching from program:.*Attaching after fork to.* at .*15.*$gdb_prompt $"\
+                      {pass "set follow child, hit tbreak"}
+      -re "$gdb_prompt $" {fail "set follow child, hit tbreak"}
+      timeout         {fail "(timeout) set follow child, hit tbreak"}
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+   send_gdb "delete breakpoints\n"
+   gdb_expect {
+      -re "Delete all breakpoints.*$" {
+         send_gdb "y\n"
+         gdb_expect {
+            -re "$gdb_prompt $"\
+                    {pass "set follow child, cleanup"}
+            timeout {fail "(timeout) set follow child, cleanup"}
+         }
+      }
+      -re "$gdb_prompt $" {fail "set follow child, cleanup"}
+      timeout         {fail "(timeout) set follow child, cleanup"}
+   }
+}
+
+proc tcatch_fork_parent_follow {} {
+   global gdb_prompt
+
+   send_gdb "catch fork\n"
+   gdb_expect {
+      -re "Catchpoint .*(fork).*$gdb_prompt $"\
+                      {pass "explicit parent follow, set tcatch fork"}
+      -re "$gdb_prompt $" {fail "explicit parent follow, set tcatch fork"}
+      timeout         {fail "(timeout) explicit parent follow, set tcatch fork"}
+   }
+# ??rehrauer: I don't yet know how to get the id of the tcatch
+# via this script, so that I can add a -do list to it.  For now,
+# do the follow stuff after the catch happens.
+
+   send_gdb "continue\n"
+   gdb_expect {
+      -re ".*in _fork_sys.*$gdb_prompt $"\
+                      {pass "explicit parent follow, tcatch fork"}
+      -re "$gdb_prompt $" {fail "explicit parent follow, tcatch fork"}
+      timeout         {fail "(timeout) explicit parent follow, tcatch fork"}
+   }
+   send_gdb "set follow parent\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow parent"}
+      timeout         {fail "(timeout) set follow parent"}
+   }
+   send_gdb "tbreak 15\n"
+   gdb_expect {
+      -re "Breakpoint.*, line 15.*$gdb_prompt $"\
+                      {pass "set follow parent, tbreak"}
+      -re "$gdb_prompt $" {fail "set follow parent, tbreak"}
+      timeout         {fail "(timeout) set follow child, tbreak"}
+   }
+   send_gdb "continue\n"
+   gdb_expect {
+      -re ".*Detaching after fork from.* at .*15.*$gdb_prompt $"\
+                      {pass "set follow parent, hit tbreak"}
+      -re "$gdb_prompt $" {fail "set follow parent, hit tbreak"}
+      timeout         {fail "(timeout) set follow parent, hit tbreak"}
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+   send_gdb "delete breakpoints\n"
+   gdb_expect {
+      -re "Delete all breakpoints.*$" {
+         send_gdb "y\n"
+         gdb_expect {
+            -re "$gdb_prompt $"\
+                    {pass "set follow parent, cleanup"}
+            timeout {fail "(timeout) set follow parent, cleanup"}
+         }
+      }
+      -re "$gdb_prompt $" {fail "set follow parent, cleanup"}
+      timeout         {fail "(timeout) set follow parent, cleanup"}
+   }
+}
+
+proc do_fork_tests {} {
+   global gdb_prompt
+
+   # Verify that help is available for "set follow-fork-mode".
+   #
+   send_gdb "help set follow-fork-mode\n"
+   gdb_expect {
+      -re "Set debugger response to a program call of fork or vfork..*
+A fork or vfork creates a new process.  follow-fork-mode can be:.*
+.*parent  - the original process is debugged after a fork.*
+.*child   - the new process is debugged after a fork.*
+.*ask     - the debugger will ask for one of the above choices.*
+For \"parent\" or \"child\", the unfollowed process will run free..*
+By default, the debugger will follow the parent process..*$gdb_prompt $"\
+                      { pass "help set follow" }
+      -re "$gdb_prompt $" { fail "help set follow" }
+      timeout         { fail "(timeout) help set follow" }
+   }
+
+   # Verify that we can set follow-fork-mode, using an abbreviation
+   # for both the flag and its value.
+   #
+   send_gdb "set follow ch\n"
+   send_gdb "show fol\n"
+   gdb_expect {
+     -re "Debugger response to a program call of fork or vfork is \"child\".*$gdb_prompt $"\
+             {pass "set follow, using abbreviations"}
+     timeout {fail "(timeout) set follow, using abbreviations"}
+   }
+
+   # Verify that we cannot set follow-fork-mode to nonsense.
+   #
+   send_gdb "set follow chork\n"
+   gdb_expect {
+     -re "Undefined item: \"chork\".*$gdb_prompt $"\
+                     {pass "set follow to nonsense is prohibited"}
+     -re "$gdb_prompt $" {fail "set follow to nonsense is prohibited"}
+     timeout         {fail "(timeout) set follow to nonsense is prohibited"}
+   }
+   send_gdb "set follow parent\n"
+   gdb_expect {
+     -re "$gdb_prompt $" {pass "set follow to nonsense is prohibited (reset parent)"}
+     timeout         {fail "set follow to nonsense is prohibited (reset parent)"}
+   }
+
+   # Test the default behaviour, which is to follow the parent of a
+   # fork, and detach from the child.  Do this without catchpoints.
+   #
+   if [runto_main] then { default_fork_parent_follow }
+
+   # Test the ability to explicitly follow the parent of a fork, and
+   # detach from the child.  Do this without catchpoints.
+   #
+   if [runto_main] then { explicit_fork_parent_follow }
+
+   # Test the ability to follow the child of a fork, and detach from
+   # the parent.  Do this without catchpoints.
+   #
+   if [runto_main] then { explicit_fork_child_follow }
+
+   # Test the ability to follow both child and parent of a fork.  Do
+   # this without catchpoints.
+   # ??rehrauer: NYI.  Will add testpoints here when implemented.
+   #
+
+   # Test the ability to have the debugger ask the user at fork-time
+   # whether to follow the parent, child or both.  Do this without
+   # catchpoints.
+   # ??rehrauer: NYI.  Will add testpoints here when implemented.
+   #
+
+   # Test the ability to catch a fork, specify that the child be
+   # followed, and continue.  Make the catchpoint permanent.
+   #
+   if [runto_main] then { catch_fork_child_follow }
+
+   # Test the ability to catch a fork, specify via a -do clause that
+   # the parent be followed, and continue.  Make the catchpoint temporary.
+   #
+   if [runto_main] then { tcatch_fork_parent_follow }
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+# This is a test of gdb's ability to follow the parent, child or both
+# parent and child of a Unix fork() system call.
+#
+do_fork_tests
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/foll-vfork.c b/gdb/testsuite/gdb.hp/foll-vfork.c
new file mode 100644
index 0000000..c7e6cd3
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-vfork.c
@@ -0,0 +1,15 @@
+#include <stdio.h>
+
+main ()
+{
+  int  pid;
+
+  pid = vfork ();
+  if (pid == 0) {
+    printf ("I'm the child!\n");
+    execlp ("gdb.hp/vforked-program", "gdb.hp/vforked-program", (char *)0);
+  }
+  else {
+    printf ("I'm the proud parent of child #%d!\n", pid);
+  }
+}
diff --git a/gdb/testsuite/gdb.hp/foll-vfork.exp b/gdb/testsuite/gdb.hp/foll-vfork.exp
new file mode 100644
index 0000000..26c6981
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/foll-vfork.exp
@@ -0,0 +1,381 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if {![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"]} {
+    #setup_xfail "*-*.*"
+    return 0
+}
+
+set testfile "foll-vfork"
+set testfile2 "vforked-program"
+set srcfile ${testfile}.c
+set srcfile2 ${testfile2}.c
+set binfile ${objdir}/${subdir}/${testfile}
+set binfile2 ${objdir}/${subdir}/${testfile2}
+
+# build the first test case
+#execute_anywhere "echo set prototypes 1 > ${objdir}/${subdir}/${testfile}.tmp"
+#if  { [compile "-g -DNO_PROTOTYPES ${srcdir}/${subdir}/${srcfile2} -o ${binfile2} "] != "" } {
+#  perror "Couldn't compile ${srcfile2}"
+#  return -1
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#if  { [compile "-g ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#    execute_anywhere "rm -f ${objdir}/${subdir}/${testfile}.tmp"
+    # built the second test case since we can't use prototypes
+#    warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES"
+#    execute_anywhere "echo set prototypes 0 > ${objdir}/${subdir}/${testfile}.tmp"
+#    if  { [compile "-g -DNO_PROTOTYPES ${srcdir}/${subdir}/${srcfile} -o ${binfile} "] != "" } {
+#	perror "Couldn't compile ${testfile}.c"
+#	return -1
+#    }
+#}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+# Until "set follow-fork-mode" and "catch vfork" are implemented on
+# other targets...
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+   setup_xfail "*-*-*"
+}
+
+
+# A few of these tests require a little more time than the standard
+# timeout allows.
+set oldtimeout $timeout
+set timeout [expr "$timeout + 10"]
+
+proc vfork_parent_follow_through_step {} {
+   global gdb_prompt
+
+   send_gdb "set follow parent\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow parent, vfork through step"}
+      timeout         {fail "set follow parent, vfork through step"}
+   }
+   send_gdb "next\n"
+   gdb_expect {
+      -re "Detaching after fork from.*8.*$gdb_prompt $"\
+                      {pass "vfork parent follow, through step"}
+      -re "$gdb_prompt $" {fail "vfork parent follow, through step"}
+      timeout         {fail "(timeout) vfork parent follow, through step" }
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any gdb_expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc vfork_parent_follow_to_bp {} {
+   global gdb_prompt
+
+   send_gdb "set follow parent\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow parent, vfork to bp"}
+      timeout         {fail "set follow parent, vfork to bp"}
+   }
+   send_gdb "break 13\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "break, vfork to bp"}
+      timeout         {fail "break, vfork to bp"}
+   }
+   send_gdb "continue\n"
+   gdb_expect {
+      -re ".*Detaching after fork from process.*Breakpoint.*13.*$gdb_prompt $"\
+                      {pass "vfork parent follow, to bp"}
+      -re "$gdb_prompt $" {fail "vfork parent follow, to bp"}
+      timeout         {fail "(timeout) vfork parent follow, to bp" }
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc vfork_and_exec_child_follow_to_main_bp {} {
+   global gdb_prompt
+   global binfile
+
+   send_gdb "set follow child\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow child, vfork and exec to main bp"}
+      timeout         {fail "set follow child, vfork and exec to main bp"}
+   }
+   send_gdb "continue\n"
+   gdb_expect {
+      -re "Detaching from program.*Attaching after fork to.*Executing new program.*Breakpoint.*vforked-program.c:5.*$gdb_prompt $"\
+                      {pass "vfork and exec child follow, to main bp"}
+      -re "$gdb_prompt $" {fail "vfork and exec child follow, to main bp"}
+      timeout         {fail "(timeout) vfork and exec child follow, to main bp" }
+   }
+   # The parent has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any gdb_expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+
+   # Explicitly kill this child, or a subsequent rerun actually runs
+   # the exec'd child, not the original program...
+   send_gdb "kill\n"
+   gdb_expect {
+      -re ".*Kill the program being debugged.*y or n. $" {
+         send_gdb "y\n"
+         send_gdb "file $binfile\n"
+         gdb_expect {
+            -re ".*Load new symbol table from.*y or n. $" {
+               send_gdb "y\n"
+               gdb_expect {
+                  -re "Reading symbols from.*$gdb_prompt $" {}
+                  timeout { fail "loading symbols (timeout)"; return }
+               }
+            }
+            -re ".*gdb_prompt $" {}
+            timeout { fail "loading symbols (timeout)"; return }
+          }
+      }
+      -re ".*$gdb_prompt $" {}
+      timeout { fail "killing inferior (timeout)" ; return }
+    }
+}
+
+proc vfork_and_exec_child_follow_through_step {} {
+   global gdb_prompt
+   global binfile
+
+# This test cannot be performed prior to HP-UX 10.30, because ptrace-based
+# debugging of a vforking program basically doesn't allow the child to do
+# things like hit a breakpoint between a vfork and exec.  This means that
+# saying "set follow child; next" at a vfork() call won't work, because
+# the implementation of "next" sets a "step resume" breakpoint at the
+# return from the vfork(), which the child will hit on its way to exec'ing.
+#
+   if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+      verbose "vfork child-following next test ignored for non-hppa or pre-HP/UX-10.30 targets."
+      return 0
+   }
+
+   send_gdb "set follow child\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow child, vfork and exec through step"}
+      timeout         {fail "set follow child, vfork and exec through step"}
+   }
+   send_gdb "next\n"
+   gdb_expect {
+      -re "Detaching from program.*Attaching after fork to.*Executing new program.*Breakpoint.*vforked_program.c:5.*$gdb_prompt $"\
+                      {pass "vfork and exec child follow, through step"}
+      -re "$gdb_prompt $" {fail "vfork and exec child follow, through step"}
+      timeout         {fail "(timeout) vfork and exec child follow, through step" }
+   }
+   # The parent has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+
+   # Explicitly kill this child, or a subsequent rerun actually runs
+   # the exec'd child, not the original program...
+   send_gdb "kill\n"
+   gdb_expect {
+      -re ".*Kill the program being debugged.*y or n. $" {
+         send_gdb "y\n"
+         send_gdb "file $binfile\n"
+         gdb_expect {
+            -re ".*Load new symbol table from.*y or n. $" {
+               send_gdb "y\n"
+               gdb_expect {
+                  -re "Reading symbols from.*$gdb_prompt $" {}
+                  timeout { fail "loading symbols (timeout)"; return }
+               }
+            }
+            -re ".*gdb_prompt $" {}
+            timeout { fail "loading symbols (timeout)"; return }
+          }
+      }
+      -re ".*$gdb_prompt $" {}
+      timeout { fail "killing inferior (timeout)" ; return }
+    }
+}
+
+proc tcatch_vfork_then_parent_follow {} {
+   global gdb_prompt
+   global srcfile
+
+   send_gdb "set follow parent\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow parent, tcatch vfork"}
+      timeout         {fail "set follow parent, tcatch vfork"}
+   }
+   send_gdb "tcatch vfork\n"
+   gdb_expect {
+      -re "Catchpoint .*(vfork).*$gdb_prompt $"\
+                      {pass "vfork parent follow, set tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork parent follow, set tcatch vfork"}
+      timeout         {fail "(timeout) vfork parent follow, set tcatch vfork"}
+   }
+   send_gdb "continue\n"
+# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs
+# stop you in "_vfork".
+   gdb_expect {
+      -re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt $"\
+                      {pass "vfork parent follow, tcatch vfork"}
+      -re "0x\[0-9a-fA-F\]*.*_vfork.*$gdb_prompt $"\
+                      {pass "vfork parent follow, tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork parent follow, tcatch vfork"}
+      timeout         {fail "(timeout) vfork parent follow, tcatch vfork"}
+   }
+   send_gdb "finish\n"
+   gdb_expect {
+      -re "Run till exit from.*vfork.*0x\[0-9a-fA-F\]* in main .* at .*${srcfile}:7.*$gdb_prompt $"\
+                      {pass "vfork parent follow, finish after tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork parent follow, finish after tcatch vfork"}
+      timeout         {fail "(timeout) vfork parent follow, finish after tcatch vfork" }
+   }
+   # The child has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc tcatch_vfork_then_child_follow {} {
+   global gdb_prompt
+   global srcfile2
+
+   send_gdb "set follow child\n"
+   gdb_expect {
+      -re "$gdb_prompt $" {pass "set follow child, tcatch vfork"}
+      timeout         {fail "set follow child, tcatch vfork"}
+   }
+   send_gdb "tcatch vfork\n"
+   gdb_expect {
+      -re "Catchpoint .*(vfork).*$gdb_prompt $"\
+                      {pass "vfork child follow, set tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork child follow, set tcatch vfork"}
+      timeout         {fail "(timeout) vfork child follow, set tcatch vfork"}
+   }
+   send_gdb "continue\n"
+# HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs
+# stop you in "_vfork".
+   gdb_expect {
+      -re "0x\[0-9a-fA-F\]*.*vfork.*$gdb_prompt $"\
+                      {pass "vfork child follow, tcatch vfork"}
+      -re "0x\[0-9a-fA-F\]*.*_vfork.*$gdb_prompt $"\
+                      {pass "vfork child follow, tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork child follow, tcatch vfork"}
+      timeout         {fail "(timeout) vfork child follow, tcatch vfork"}
+   }
+   send_gdb "finish\n"
+   gdb_expect {
+      -re "Run till exit from.*vfork.*${srcfile2}:5.*$gdb_prompt $"\
+                      {pass "vfork child follow, finish after tcatch vfork"}
+      -re "$gdb_prompt $" {fail "vfork child follow, finish after tcatch vfork"}
+      timeout         {fail "(timeout) vfork child follow, finish after tcatch vfork" }
+   }
+   # The parent has been detached; allow time for any output it might
+   # generate to arrive, so that output doesn't get confused with
+   # any expected debugger output from a subsequent testpoint.
+   #
+   exec sleep 1
+}
+
+proc do_vfork_and_exec_tests {} {
+   global gdb_prompt
+
+   # Try following the parent process by stepping through a call to
+   # vfork.  Do this without catchpoints.
+   if [runto_main] then { vfork_parent_follow_through_step }
+
+   # Try following the parent process by setting a breakpoint on the
+   # other side of a vfork, and running to that point.  Do this
+   # without catchpoints.
+   if [runto_main] then { vfork_parent_follow_to_bp }
+
+   # Try following the child process by just continuing through the
+   # vfork, and letting the parent's breakpoint on "main" be auto-
+   # magically reset in the child.
+   #
+   if [runto_main] then { vfork_and_exec_child_follow_to_main_bp }
+
+   # Try following the child process by stepping through a call to
+   # vfork.  The child also executes an exec.  Since the child cannot
+   # be debugged until after it has exec'd, and since there's a bp on
+   # "main" in the parent, and since the bp's for the parent are
+   # recomputed in the exec'd child, the step through a vfork should
+   # land us in the "main" for the exec'd child, too.
+   #
+   if [runto_main] then { vfork_and_exec_child_follow_through_step }
+
+   # Try catching a vfork, and stepping out to the parent.
+   #
+   if [runto_main] then { tcatch_vfork_then_parent_follow }
+
+   # Try catching a vfork, and stepping out to the child.
+   #
+   if [runto_main] then { tcatch_vfork_then_child_follow }
+
+   # Test the ability to follow both child and parent of a vfork.  Do
+   # this without catchpoints.
+   # ??rehrauer: NYI.  Will add testpoints here when implemented.
+   #
+
+   # Test the ability to have the debugger ask the user at vfork-time
+   # whether to follow the parent, child or both.  Do this without
+   # catchpoints.
+   # ??rehrauer: NYI.  Will add testpoints here when implemented.
+   #
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+# This is a test of gdb's ability to follow the parent or child
+# of a Unix vfork() system call.  (The child will subsequently
+# call a variant of a Unix exec() system call.)
+#
+do_vfork_and_exec_tests
+
+set timeout $oldtimeout
+return 0
diff --git a/gdb/testsuite/gdb.hp/gen-so-thresh.c b/gdb/testsuite/gdb.hp/gen-so-thresh.c
new file mode 100644
index 0000000..c1a3eb5
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/gen-so-thresh.c
@@ -0,0 +1,229 @@
+/*
+ * Program to generate the so-thresh testcase,
+ * including associated linked-against shared libraries.
+ * Build as:
+ *
+ *        cc -g -o gen-so-thresh gen-so-thresh.c
+ *
+ * Invoke as:
+ *
+ *        gen-so-thresh
+ *
+ * It will put all the code in the current directory (".").
+ *
+ * A makefile can also be generated if the -makemake option is used.
+ * To use the makefile:
+ *
+ *        make -f so-thresh.mk all
+ *
+ * The name of the application is
+ *
+ *        so-thresh
+ *
+ * (Revised from a program by John Bishop.  --rehrauer)
+ */
+
+#include <stdio.h>
+#include <sys/stat.h>
+#include <sys/fcntl.h>
+
+int main (argc, argv)
+int    argc;
+char **argv;
+{
+#define NUMBER_OF_INT_VARS 1500
+#define NUMBER_OF_LIBS 3
+    int     lib_num = NUMBER_OF_LIBS;
+    int     i;
+    int     i2;
+    FILE   *main_file;
+    FILE   *lib_file;
+    FILE   *make_file;
+    FILE   *link_file;
+
+    char  testcase_name [1000];
+    char  linkfile_name [1000];
+    char  makefile_name [1000];
+    char  mainfile_name [1000];
+
+    char    file_name[100];
+    /*
+     *        0123456789       <-- length of field
+     *  "./fil0000000002.c";   <-- typical filename
+     *   12345678901234567890  <-- length of string
+     *           10        20
+     *                     ^where null goes
+     */
+    char    file_name_core[100];
+
+    /* Verify input.
+    */
+    if ((argc < 1) || (argc > 2) || (argv == NULL) ||
+        ((argc == 2) && (strcmp (argv[1], "-makemake") != 0)))
+      {
+        printf ("** Syntax: %s [-makemake]\n", argv[0]);
+        return;
+      }
+
+    if (strncmp (argv[0], "gen-", 4) != 0)
+      {
+        printf ("** This tool expected to be named \"gen-something\"\n");
+        return;
+      }
+    strcpy (testcase_name, argv[0]+4);
+
+    strcpy (linkfile_name, testcase_name);
+    strcat (linkfile_name, ".linkopts");
+    link_file = fopen (linkfile_name, "w");
+    fprintf (link_file, "# Linker options for %s test\n", testcase_name);
+    
+    /* Generate the makefile, if requested.
+       */
+    if (argc == 2)
+      {
+        strcpy (makefile_name, testcase_name);
+        strcat (makefile_name, ".mk.new");
+        make_file = fopen (makefile_name, "w");
+        printf ("  Note: New makefile (%s) generated.\n", makefile_name);
+        printf ("  May want to update existing makefile, if any.\n");
+        fprintf (make_file, "# Generated automatically by %s\n", argv[0]);
+        fprintf (make_file, "# Make file for %s test\n", testcase_name);
+        fprintf (make_file, "\n");
+        fprintf (make_file, "CFLAGS = +DA1.1 -g\n");
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# This is how to build this generator.\n");
+        fprintf (make_file, "%s.o: %s.c\n", argv[0], argv[0]);
+        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", argv[0], argv[0]);
+        fprintf (make_file, "%s: %s.o\n", argv[0], argv[0]);
+        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s %s.o\n", argv[0], argv[0]);
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# This is how to run this generator.\n");
+        fprintf (make_file, "# This target should be made before the 'all' target,\n");
+        fprintf (make_file, "# to ensure that the shlib sources are all available.\n");
+        fprintf (make_file, "require_shlibs: %s\n", argv[0]);
+        for (i=0; i < lib_num; i++)
+          {
+            fprintf (make_file, "\tif ! [ -a lib%2.2d_%s.c ] ; then \\\n", i, testcase_name);
+            fprintf (make_file, "\t  %s ; \\\n", argv[0]);
+            fprintf (make_file, "\tfi\n");
+          }
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# This is how to build all the shlibs.\n");
+        fprintf (make_file, "# Be sure to first make the require_shlibs target!\n");
+        for (i=0; i < lib_num; i++)
+          {
+            fprintf (make_file, "lib%2.2d_%s.o: lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
+            fprintf (make_file, "\t$(CC) $(CFLAGS) +Z -o lib%2.2d_%s.o -c lib%2.2d_%s.c\n", i, testcase_name, i, testcase_name);
+            fprintf (make_file, "lib%2.2d-%s.sl: lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
+            fprintf (make_file, "\t$(LD) $(LDFLAGS) -b -o lib%2.2d-%s.sl lib%2.2d-%s.o\n", i, testcase_name, i, testcase_name);
+          }
+        fprintf (make_file, "\n");
+fprintf (make_file, "# For convenience, here's names for all pieces of all shlibs.\n");
+        fprintf (make_file, "SHLIB_SOURCES = \\\n");
+        for (i=0; i < lib_num-1; i++)
+          fprintf (make_file, "\tlib%2.2d-%s.c \\\n", i, testcase_name);
+        fprintf (make_file, "\tlib%2.2d-%s.c\n", lib_num-1, testcase_name);
+        fprintf (make_file, "SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)\n");
+        fprintf (make_file, "SHLIBS = $(SHLIB_SOURCES:.c=.sl)\n");
+        fprintf (make_file, "SHLIB_NAMES = $(SHLIB_SOURCES:.c=)\n");
+        fprintf (make_file, "EXECUTABLES = $(SHLIBS) %s %s\n", argv[0], testcase_name);
+        fprintf (make_file, "OBJECT_FILES = $(SHLIB_OBJECTS) %s.o %s.o\n", argv[0], testcase_name);
+        fprintf (make_file, "\n");
+        fprintf (make_file, "shlib_objects: $(SHLIB_OBJECTS)\n");
+        fprintf (make_file, "shlibs: $(SHLIBS)\n");
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# This is how to build the debuggable testcase that uses the shlibs.\n");
+        fprintf (make_file, "%s.o: %s.c\n", testcase_name, testcase_name);
+        fprintf (make_file, "\t$(CC) $(CFLAGS) -o %s.o -c %s.c\n", testcase_name, testcase_name);
+        fprintf (make_file, "%s: shlibs %s.o\n", testcase_name, testcase_name);
+        fprintf (make_file, "\t$(LD) $(LDFLAGS) -o %s -lc -L. ", testcase_name);
+        fprintf (make_file, "-c %s /opt/langtools/lib/end.o /lib/crt0.o %s.o\n", linkfile_name, testcase_name);
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# Yeah, but you should first make the require_shlibs target!\n");
+        fprintf (make_file, "all: %s %s\n", testcase_name, argv[0]);
+        fprintf (make_file, "\n");
+        fprintf (make_file, "# To remove everything built via this makefile...\n");
+        fprintf (make_file, "clean:\n");
+        /* Do this carefully, to avoid hitting silly HP-UX ARG_MAX limits... */
+        fprintf (make_file, "\trm -f lib0*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib1*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib2*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib3*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib4*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib5*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib6*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib7*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib8*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f lib9*-%s.*\n", testcase_name);
+        fprintf (make_file, "\trm -f %s %s %s %s.c\n", argv[0], testcase_name, linkfile_name, testcase_name);
+        fprintf (make_file, "\n");
+        fclose (make_file);
+      }
+
+    /* Generate the code for the libraries.
+       */
+    for (i=0; i < lib_num; i++) {
+
+        /* Generate the names for the library.
+         */
+        sprintf (file_name, "lib%2.2d-%s.c", i, testcase_name);
+        sprintf (file_name_core, "lib%2.2d-%s", i, testcase_name);
+
+        /* Generate the source code.
+         */
+        lib_file = fopen (file_name, "w");
+        fprintf (lib_file, "/* Shared library file number %d */\n", i);
+        fprintf (lib_file, "#include <stdio.h>\n\n");
+        fprintf (lib_file, "/* The following variables largely exist to bloat this library's debug info. */\n");
+        fprintf (lib_file, "static char c_static_buf_%d [100];\n", i);
+        for (i2=0; i2<NUMBER_OF_INT_VARS; i2++)
+          fprintf (lib_file, "int i_%d_%d;\n", i, i2);
+        fprintf (lib_file, "\nint r_%d ()\n", i);
+        fprintf (lib_file, "{\n");
+        for (i2=0; i2<NUMBER_OF_INT_VARS; i2++)
+          fprintf (lib_file, "    i_%d_%d = %d*%d;\n", i, i2, i2, i2);
+        fprintf (lib_file, "    return 1;\n");
+        fprintf (lib_file, "}\n\n");
+        fprintf (lib_file, "/* end of generated file */\n");
+        fclose (lib_file);
+
+        /* Add a linker options line
+           */
+        fprintf (link_file, "-l%2.2d-%s\n", i, testcase_name);
+    }
+
+    /* Generate the "main" file.
+     */
+    strcpy (mainfile_name, testcase_name);
+    strcat (mainfile_name, ".c");
+    main_file = fopen (mainfile_name, "w");
+    fprintf (main_file, "/* Generated test progam with %d shared libraries. */\n\n",
+             lib_num);
+    fprintf (main_file, "#include <stdio.h>\n\n");
+
+    for (i = 0; i < lib_num; i++) {
+      fprintf (main_file, "extern int r_%d();\n", i);
+    }
+
+    fprintf (main_file, "\n");
+    fprintf (main_file, "int main()\n");
+    fprintf (main_file, "{\n");
+    fprintf (main_file, "    int accum;\n");
+    fprintf (main_file, "    int lib_num = %d;\n", lib_num);
+  
+    for (i = 0; i < lib_num; i++) {
+      fprintf (main_file, "    accum += r_%d();\n", i);
+    }
+
+    fprintf (main_file, "    printf( \"Final value: %%d, should be %%d\\n\", accum, lib_num );\n\n");
+    fprintf (main_file, "    return 0;\n");
+    fprintf (main_file, "}\n\n");
+    fprintf (main_file, "/* end of generated file */\n");
+    fclose (main_file);
+
+    /* Finish up the link file and the build file
+     */
+    fclose (link_file);
+}
+
+/* End of file */
diff --git a/gdb/testsuite/gdb.hp/hwwatchbus.c b/gdb/testsuite/gdb.hp/hwwatchbus.c
new file mode 100644
index 0000000..7a02c9b
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/hwwatchbus.c
@@ -0,0 +1,9 @@
+/* This program raises a SIGBUS signal on HP-UX when the
+   pointer "bogus_p" is dereferenced.
+   */
+int *  bogus_p = (int *)3;
+
+main()
+{
+  *bogus_p = 0xdeadbeef;
+}
diff --git a/gdb/testsuite/gdb.hp/hwwatchbus.exp b/gdb/testsuite/gdb.hp/hwwatchbus.exp
new file mode 100644
index 0000000..d4899a9
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/hwwatchbus.exp
@@ -0,0 +1,84 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX h/w watch test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+set testfile "hwwatchbus"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# build the first test case
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# Start with a fresh gdb
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+# We ought to be able to set a hardware watchpoint, step, and
+# get a SIGBUS signal reported.
+#
+if ![runto_main] then {
+  fail "can't run to main"
+  return 0
+}
+
+send_gdb "watch bogus_p\n"
+gdb_expect {
+  -re "Hardware watchpoint \[0-9\]*: bogus_p.*$gdb_prompt $"\
+          {pass "set h/w watchpoint"}
+  -re "$gdb_prompt $"\
+          {fail "set h/w watchpoint"}
+  timeout {fail "(timeout) set h/w watchpoint"}
+}
+
+send_gdb "step\n"
+gdb_expect {
+  -re "Program received signal SIGBUS, Bus error.* in main .*${srcfile}:8.*$gdb_prompt $"\
+          {pass "see real SIGBUS when h/w watchpoint set"}
+  -re "$gdb_prompt $"\
+          {fail "see real SIGBUS when h/w watchpoint set"}
+  timeout {fail "(timeout) see real SIGBUS when h/w watchpoint set"}
+}
+
+return 0
diff --git a/gdb/testsuite/gdb.hp/inherit-hp.exp b/gdb/testsuite/gdb.hp/inherit-hp.exp
new file mode 100644
index 0000000..645358e
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/inherit-hp.exp
@@ -0,0 +1,849 @@
+# Copyright (C) 1992, 1993, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+# Note - create separate "inherit" executable from misc.cc
+
+set testfile "inherit-hp"
+set srcfile misc-hp.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# Single inheritance, print individual members.
+#
+
+proc test_print_si_members {} {
+    # Print all members of g_A using fully qualified form.
+
+    gdb_test "print g_A.A::a" ".* = 1" "print g_A.A::a"
+
+    gdb_test "print g_A.A::x" ".* = 2" "print g_A.A::x"
+
+    # Print members of g_A using nonambiguous compact form.
+
+    gdb_test "print g_A.a" ".* = 1" "print g_A.a"
+
+    gdb_test "print g_A.x" ".* = 2" "print g_A.x"
+
+    # Print all members of g_B using fully qualified form.
+
+    gdb_test "print g_B.A::a" ".* = 3" "print g_B.A::a"
+
+    gdb_test "print g_B.A::x" ".* = 4" "print g_B.A::x"
+
+    gdb_test "print g_B.B::b" ".* = 5" "print g_B.B::b"
+
+    gdb_test "print g_B.B::x" ".* = 6" "print g_B.B::x"
+
+    # Print members of g_B using nonambiguous compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_B.a" ".* = 3" "print g_B.a"
+
+    gdb_test "print g_B.b" ".* = 5" "print g_B.b"
+
+    gdb_test "print g_B.x" ".* = 6" "print g_B.x"
+
+    # Print all members of g_C using fully qualified form.
+
+    gdb_test "print g_C.A::a" ".* = 7" "print g_C.A::a"
+
+    gdb_test "print g_C.A::x" ".* = 8" "print g_C.A::x"
+
+    gdb_test "print g_C.C::c" ".* = 9" "print g_C.C::c"
+
+    gdb_test "print g_C.C::x" ".* = 10" "print g_C.C::x"
+
+    # Print members of g_C using nonambiguous compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_C.a" ".* = 7" "print g_C.a"
+
+    gdb_test "print g_C.c" ".* = 9" "print g_C.c"
+
+    gdb_test "print g_C.x" ".* = 10" "print g_C.x"
+}
+
+#
+# Single inheritance, print type definitions.
+#
+
+proc test_ptype_si {} {
+    global gdb_prompt
+    global ws
+
+    # Print class A as a type.
+
+    send_gdb "ptype A\n"
+    gdb_expect {
+	-re "type = class A \{\r\n.*\[ \]*int a;\r\n\[ \]*int x;\r\n.*\[ \]*\}\r\n$gdb_prompt $" {
+	    pass "ptype A (FIXME)"
+	}
+	-re "type = struct A \{\r\n\[ \]*int a;\r\n\[ \]*int x;\r\n\[ \]*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype A" }
+	timeout { fail "ptype A (timeout)" ; return }
+    }
+
+    # Print class A as an explicit class.
+
+    send_gdb "ptype class A\n"
+    gdb_expect {
+	-re "type = class A \{\r\n.*\[ \]*int a;\r\n\[ \]*int x;\r\n.*\[ \]*\}\r\n$gdb_prompt $" {
+	    pass "ptype class A (FIXME)"
+	}
+	-re "type = struct A \{\r\n\[ \]*int a;\r\n\[ \]*int x;\r\n\[ \]*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype class A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class A" }
+	timeout { fail "ptype class A (timeout)" ; return }
+    }
+
+    # Print type of an object of type A.
+
+    send_gdb "ptype g_A\n"
+    gdb_expect {
+	-re "type = class A \{\r\n.*\[ \]*int a;\r\n\[ \]*int x;\r\n.*\[ \]*\}\r\n$gdb_prompt $" {
+	    pass "ptype g_A (FIXME)"
+	}
+	-re "type = struct A \{\r\n\[ \]*int a;\r\n\[ \]*int x;\r\n\[ \]*\}\r\n$gdb_prompt $" {
+	    setup_xfail "*-*-*"
+	    fail "ptype g_A (FIXME)"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype g_A" }
+	timeout { fail "ptype g_A (timeout)" ; return }
+    }
+
+    # Print class B as a type.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype B" "type = class B : public A \{\r\n\[ \]*public:\r\n\[ \]*int b;\r\n\[ \]*int x;\r\n.*\}" "ptype B"
+
+    # Print class B as an explicit class.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class B" "type = class B : public A \{\r\n\[ \]*public:\r\n\[ \]*int b;\r\n\[ \]*int x;\r\n.*\}" "ptype class B"
+
+    # Print type of an object of type B.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_B" "type = class B : public A \{\r\n\[ \]*public:\r\n\[ \]*int b;\r\n\[ \]*int x;\r\n.*\}" "ptype g_B"
+
+    # Print class C as a type.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype C" "type = class C : public A \{\r\n\[ \]*public:\r\n\[ \]*int c;\r\n\[ \]*int x;\r\n.*\}" "ptype C"
+
+    # Print class C as an explicit class.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class C" "type = class C : public A \{\r\n\[ \]*public:\r\n\[ \]*int c;\r\n\[ \]*int x;\r\n.*\}" "ptype class C"
+
+    # Print type of an object of type g_C.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_C" "type = class C : public A \{\r\n\[ \]*public:\r\n\[ \]*int c;\r\n\[ \]*int x;\r\n.*\}" "ptype g_C"
+
+    # gcc cygnus-2.3.3 (Q1) has this bug, but it was fixed as of
+    # cygnus-2.3.3-930417.  PR 2819.
+    send_gdb "ptype tagless_struct\n"
+    gdb_expect {
+	-re "type = class \{${ws}public:${ws}int one;${ws}int two;${ws}tagless_struct & operator=\\(tagless_struct &\\);${ws}\\\$_1 \\(tagless_struct &\\);${ws}\\\$_1 \\(\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype tagless struct"
+	}
+	-re "type = (struct|class).*\{.*int one;.*int two;.*\}\r\n$gdb_prompt $" {
+	    pass "ptype tagless struct (obsolete gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype tagless struct"
+	}
+	timeout {
+	    fail "ptype tagless struct (timeout)"
+	}
+    }
+
+    send_gdb "ptype v_tagless\n"
+    gdb_expect {
+	-re "type = class \{${ws}public:${ws}int one;${ws}int two;${ws}tagless_struct & operator=\\(tagless_struct &\\);${ws}\\\$_1 \\(tagless_struct &\\);${ws}\\\$_1 \\(\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype variable of type tagless struct"
+	}
+	-re "type = (struct|class).*\{.*int one;.*int two;.*\}\r\n$gdb_prompt $" {
+	    pass "ptype variable of type tagless struct (obsolete gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype variable of type tagless struct"
+	}
+	timeout {
+	    fail "ptype variable of type tagless struct (timeout)"
+	}
+    }
+}
+
+#
+# Single inheritance, print complete classes.
+#
+
+proc test_print_si_classes {} {
+    # Print all members of g_A.
+
+    gdb_test "print g_A" ".* = \{a = 1, x = 2\}" "print g_A"
+
+    # Print all members of g_B.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_B" ".* = \{\<class A\> = \{a = 3, x = 4\}, b = 5, x = 6\}" "print g_B"
+
+    # Print all members of g_C.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_C" ".* = \{\<class A\> = \{a = 7, x = 8\}, c = 9, x = 10\}" "print g_C"
+}
+
+#
+# Single inheritance, print anonymous unions.
+# GDB versions prior to 4.14 entered an infinite loop when printing
+# the type of a class containing an anonymous union, and they were also
+# incapable of printing the member of an anonymous union.
+# We test the printing of the member first, and perform the other tests
+# only if the test succeeds, to avoid the infinite loop.
+#
+
+proc test_print_anon_union {} {
+    global gdb_prompt
+    global ws
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_anon_union.a" ".* = 2" "print anonymous union member"
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_anon_union\n"
+    gdb_expect {
+	-re ".* = \{one = 1, \{a = 2, b = 2\}\}\r\n$gdb_prompt $" {
+	    pass "print variable of type anonymous union"
+	}
+	-re ".* = .*\{one = 1,  = \{a = 2, b = .*\}\}\r\n$gdb_prompt $" {
+	    pass "print variable of type anonymous union (obsolete gcc or gdb)"
+	}
+	-re ".*\r\n$gdb_prompt $" {
+	    fail "print variable of type anonymous union"
+	}
+	timeout {
+	    fail "print variableof type anonymous union (timeout)"
+	}
+    }
+    setup_xfail_format "DWARF 1"
+    send_gdb "ptype g_anon_union\n"
+    gdb_expect {
+	-re "type = class class_with_anon_union \{${ws}public:${ws}int one;${ws}union \{${ws}public:${ws}int a;${ws}long int b;${ws}union \{\.\.\.\} & operator=\\(union \{\.\.\.\} &\\);${ws}\\\$_0 \\(union \{\.\.\.\} &\\);${ws}\\\$_0 \\(\\);${ws}\};${ws}class_with_anon_union & operator=\\(class_with_anon_union const &\\);${ws}class_with_anon_union\\(class_with_anon_union const &\\);${ws}class_with_anon_union\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "print type of anonymous union"
+	}
+	-re "type = (struct|class).*\{.*int one;.*union \{.*int a;.*(long|long int|int) b;.*\};.*\}\r\n$gdb_prompt $" {
+	    pass "print type of anonymous union (obsolete gcc or gdb)"
+	}
+	-re ".*\r\n$gdb_prompt $" {
+	    fail "print type of anonymous union"
+	}
+	timeout {
+	    fail "print type of anonymous union (timeout)"
+	}
+    }
+}
+
+#
+# Multiple inheritance, print individual members.
+#
+
+proc test_print_mi_members {} {
+    global gdb_prompt
+
+    # Print all members of g_A.
+
+    gdb_test "print g_A.A::a" ".* = 1" "print g_A.A::a"
+    
+    gdb_test "print g_A.A::x" ".* = 2" "print g_A.A::x"
+
+    # Print all members of g_B.
+
+    gdb_test "print g_B.A::a" ".* = 3" "print g_B.A::a"
+
+    gdb_test "print g_B.A::x" ".* = 4" "print g_B.A::x"
+
+    gdb_test "print g_B.B::b" ".* = 5" "print g_B.B::b"
+
+    gdb_test "print g_B.B::x" ".* = 6" "print g_B.B::x"
+
+    # Print all members of g_C.
+
+    gdb_test "print g_C.A::a" ".* = 7" "print g_C.A::a"
+
+    gdb_test "print g_C.A::x" ".* = 8" "print g_C.A::x"
+
+    gdb_test "print g_C.C::c" ".* = 9" "print g_C.C::c"
+
+    gdb_test "print g_C.C::x" ".* = 10" "print g_C.C::x"
+
+    # Print all members of g_D.
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+   # setup_xfail "*-*-*"
+    send_gdb "print g_D.A::a\n"
+    gdb_expect {	
+	-re "warning: A ambiguous; using D::B::A. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 11\r\n$gdb_prompt $" {
+	    pass "print g_D.A::a"
+	}
+	-re ".* = 15\r\n$gdb_prompt $" {
+	    fail "print g_D.A::a (did GDB's algorithm change?)"
+	}
+	-re ".* = 11\r\n$gdb_prompt $" {
+	    fail "print g_D.A::a (ambiguity not reported)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_D.A::a" }
+	timeout { fail "print g_D.A::a (timeout)" ; return }
+    }
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+   # setup_xfail "*-*-*"
+    send_gdb "print g_D.A::x\n"
+    gdb_expect {
+	-re "warning: A ambiguous; using D::B::A. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 12\r\n$gdb_prompt $" {
+	    pass "print g_D.A::x"
+	}
+	-re ".* = 16\r\n$gdb_prompt $" {
+	    fail "print g_D.A::x (did GDB's algorithm change?)"
+	}
+	-re ".* = 12\r\n$gdb_prompt $" {
+	    fail "print g_D.A::x (ambiguity not reported)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_D.A::x" }
+	timeout { fail "print g_D.A::x (timeout)" ; return }
+    }
+
+    gdb_test "print g_D.B::b" ".* = 13" "print g_D.B::b"
+
+    gdb_test "print g_D.B::x" ".* = 14" "print g_D.B::x"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D.C::c" ".* = 17" "print g_D.C::c"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D.C::x" ".* = 18" "print g_D.C::x"
+
+    gdb_test "print g_D.D::d" ".* = 19" "print g_D.D::d"
+
+    gdb_test "print g_D.D::x" ".* = 20" "print g_D.D::x"
+
+    # Print all members of g_E.
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+    #setup_xfail "*-*-*"
+    send_gdb "print g_E.A::a\n"
+    gdb_expect {
+	-re "warning: A ambiguous; using E::D::B::A. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 21\r\n$gdb_prompt $" {
+	    pass "print g_E.A::a"
+	}
+	-re ".* = 25\r\n$gdb_prompt $" {
+	    fail "print g_E.A::a (did GDB's algorithm change?)"
+	}
+	-re ".* = 21\r\n$gdb_prompt $" {
+	    fail "print g_E.A::a (ambiguity not reported)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_E.A::a" }
+	timeout { fail "print g_E.A::a (timeout)" ; return }
+    }
+
+    # The following is ambiguous, and gdb should detect this.
+    # For now, accept gdb's behavior as an expected failure if it
+    # simply prints either member correctly.
+
+   # setup_xfail "*-*-*"
+    send_gdb "print g_E.A::x\n"
+    gdb_expect {
+	-re "warning: A ambiguous; using E::D::B::A. Use a cast to disambiguate.\r\n\\$\[0-9\]* = 22\r\n$gdb_prompt $" {
+	    pass "print g_E.A::x"
+	}
+	-re ".* = 26\r\n$gdb_prompt $" {
+	    fail "print g_E.A::x (did GDB's algorithm change?)"
+	}
+	-re ".* = 22\r\n$gdb_prompt $" {
+	    fail "print g_E.A::x (ambiguity not reported)"
+	}
+	-re ".*$gdb_prompt $" { fail "print g_E.A::x" }
+	timeout { fail "print g_E.A::x (timeout)" ; return }
+    }
+
+    gdb_test "print g_E.B::b" ".* = 23" "print g_E.B::b"
+
+    gdb_test "print g_E.B::x" ".* = 24" "print g_E.B::x"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E.C::c" ".* = 27" "print g_E.C::c"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E.C::x" ".* = 28" "print g_E.C::x"
+
+    gdb_test "print g_E.D::d" ".* = 29" "print g_E.D::d"
+
+    gdb_test "print g_E.D::x" ".* = 30" "print g_E.D::x"
+
+    gdb_test "print g_E.E::e" ".* = 31" "print g_E.E::e"
+
+    gdb_test "print g_E.E::x" ".* = 32" "print g_E.E::x"
+}
+
+#
+# Multiple inheritance, print type definitions.
+#
+
+proc test_ptype_mi {} {
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype D" "type = class D : public B, public C \{\r\n\[ \]*public:\r\n\[ \]*int d;\r\n\[ \]*int x;\r\n.*\}" "ptype D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class D" "type = class D : public B, public C \{\r\n\[ \]*public:\r\n\[ \]*int d;\r\n\[ \]*int x;\r\n.*\}" "ptype class D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_D" "type = class D : public B, public C \{\r\n\[ \]*public:\r\n\[ \]*int d;\r\n\[ \]*int x;\r\n.*\}" "ptype g_D"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype E" "type = class E : public D \{\r\n\[ \]*public:\r\n\[ \]*int e;\r\n\[ \]*int x;\r\n.*\}" "ptype E"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class E" "type = class E : public D \{\r\n\[ \]*public:\r\n\[ \]*int e;\r\n\[ \]*int x;\r\n.*\}" "ptype class E"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_E" "type = class E : public D \{\r\n\[ \]*public:\r\n\[ \]*int e;\r\n\[ \]*int x;\r\n.*\}" "ptype g_E"
+}
+
+#
+# Multiple inheritance, print complete classes.
+#
+
+proc test_print_mi_classes {} {
+    # Print all members of g_D.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_D" ".* = \{\<class B\> = \{\<class A\> = \{a = 11, x = 12\}, b = 13, x = 14\}, \<class C\> = \{\<class A\> = \{a = 15, x = 16\}, c = 17, x = 18\}, d = 19, x = 20\}" "print g_D"
+
+    # Print all members of g_E.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_E" ".* = \{\<class D\> = \{\<class B\> = \{\<class A\> = \{a = 21, x = 22\}, b = 23, x = 24\}, \<class C\> = \{\<class A\> = \{a = 25, x = 26\}, c = 27, x = 28\}, d = 29, x = 30\}, e = 31, x = 32\}" "print g_E"
+}
+
+#
+# Single virtual inheritance, print individual members.
+#
+
+proc test_print_svi_members {} {
+    global gdb_prompt
+    global decimal
+
+    # Print all members of g_vA.
+
+    gdb_test "print g_vA.vA::va" ".* = 1" "print g_vA.vA::va"
+
+    gdb_test "print g_vA.vA::vx" ".* = 2" "print g_vA.vA::vx"
+
+    # Print members of g_vA using compact form.
+
+    gdb_test "print g_vA.va" ".* = 1" "print g_vA.va"
+
+    gdb_test "print g_vA.vx" ".* = 2" "print g_vA.vx"
+
+    # Print all members of g_vB.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vB.vA::va\n"
+    gdb_expect {
+	-re ".* = 3\r\n$gdb_prompt $" { pass "print g_vB.vA::va" }
+	-re ".*virtual baseclass botch.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vB.vA::va (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vB.vA::va" }
+	timeout { fail "print g_vB.vA::va (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vB.vA::vx" ".* = 4" "print g_vB.vA::vx"
+
+    gdb_test "print g_vB.vB::vb" ".* = 5" "print g_vB.vB::vb"
+
+    gdb_test "print g_vB.vB::vx" ".* = 6" "print g_vB.vB::vx"
+
+    # Print members of g_vB using compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vB.va" ".* = 3" "print g_vB.va"
+
+    gdb_test "print g_vB.vb" ".* = 5" "print g_vB.vb"
+
+    gdb_test "print g_vB.vx" ".* = 6" "print g_vB.vx"
+
+    # Print all members of g_vC.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.vA::va" ".* = 7" "print g_vC.vA::va"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.vA::vx" ".* = 8" "print g_vC.vA::vx"
+
+    gdb_test "print g_vC.vC::vc" ".* = 9" "print g_vC.vC::vc"
+
+    gdb_test "print g_vC.vC::vx" ".* = 10" "print g_vC.vC::vx"
+
+    # Print members of g_vC using compact form.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC.va" ".* = 7" "print g_vC.va"
+
+    gdb_test "print g_vC.vc" ".* = 9" "print g_vC.vc"
+
+    gdb_test "print g_vC.vx" ".* = 10" "print g_vC.vx"
+}
+
+#
+# Single virtual inheritance, print type definitions.
+#
+
+proc test_ptype_vi {} {
+    global gdb_prompt
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype vA\n"
+    gdb_expect {
+	-re "type = class vA \{\[\r\n\]+\[ \]*public:\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+.*\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype vA"
+	}
+	-re "type = struct vA \{\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype vA" }
+	timeout { fail "ptype vA (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype class vA\n"
+    gdb_expect {
+	-re "type = class vA \{\[\r\n\]+\[ \]*public:\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+.*\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re "type = struct vA \{\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype class vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype class vA" }
+	timeout { fail "ptype class vA (timeout)" ; return }
+    }
+
+    # This class does not use any C++-specific features, so it's fine for
+    # it to print as "struct".
+    send_gdb "ptype g_vA\n"
+    gdb_expect {
+	-re "type = class vA \{\[\r\n\]+\[ \]*public:\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+.*\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype g_vA"
+	}
+	-re "type = struct vA \{\[\r\n\]+\[ \]*int va;\[\r\n\]+\[ \]*int vx;\[\r\n\]+\}\[\r\n\]+$gdb_prompt $" {
+	    pass "ptype g_vA"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype g_vA" }
+	timeout { fail "ptype g_vA (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vB" "ptype vB\[\r\n\]+type = class vB : public virtual vA \{\[\r\n\]+  public:\r\n\[ \]+int vb;\r\n\[ \]+int vx;\r\n.*\}" "ptype vB (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vB" "type = class vB : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vb;\r\n\[ \]*int vx;\r\n.*\}" "ptype class vB (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vB" "type = class vB : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vb;\r\n\[ \]*int vx;\r\n.*\}" "ptype g_vB (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vC" "type = class vC : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vc;\r\n\[ \]*int vx;\r\n.*\}" "ptype vC (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vC" "type = class vC : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vc;\r\n\[ \]*int vx;\r\n.*\}" "ptype class vC (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vC" "type = class vC : public virtual vA \{\r\n\[ \]*public:\r\n\[ \]*int vc;\r\n\[ \]*int vx;\r\n.*\}" "ptype g_vC (aCC)"
+}
+
+#
+# Single virtual inheritance, print complete classes.
+#
+
+proc test_print_svi_classes {} {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    # Print all members of g_vA.
+
+    gdb_test "print g_vA" ".* = \{va = 1, vx = 2\}" "print g_vA"
+
+    # Print all members of g_vB.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vB\n"
+    gdb_expect {
+	-re ".* = \{\<class vA\> = \{va = 3, vx = 4\}, vb = 5, vx = 6, Virtual table at $hex\}\r\n$gdb_prompt $" {
+	    pass "print g_vB"
+	}
+	-re ".*invalid address 0x0.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vB (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vB" }
+	timeout { fail "print g_vB (timeout)" ; return }
+    }
+
+    # Print all members of g_vC.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vC" ".* = \{\<class vA\> = \{va = 7, vx = 8\}, vc = 9, vx = 10, Virtual table at $hex\}" "print g_vC"
+}
+
+#
+# Multiple virtual inheritance, print individual members.
+#
+
+proc test_print_mvi_members {} {
+    global gdb_prompt
+    global decimal
+
+    # Print all members of g_vD.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vD.vA::va\n"
+    gdb_expect {
+	-re ".* = 19\r\n$gdb_prompt $" { pass "print g_vD.vA::va" }
+	-re ".*virtual baseclass botch.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vD.vA::va (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vD.vA::va" }
+	timeout { fail "print g_vD.vA::va (timeout)" ; return }
+    }
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vA::vx" ".* = 20" "print g_vD.vA::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vB::vb" ".* = 21" "print g_vD.vB::vb"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vB::vx" ".* = 22" "print g_vD.vB::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vC::vc" ".* = 23" "print g_vD.vC::vc"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vD.vC::vx" ".* = 24" "print g_vD.vC::vx"
+
+    gdb_test "print g_vD.vD::vd" ".* = 25" "print g_vD.vD::vd"
+
+    gdb_test "print g_vD.vD::vx" ".* = 26" "print g_vD.vD::vx"
+
+    # Print all members of g_vE.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vA::va" ".* = 0" "print g_vE.vA::va"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vA::vx" ".* = 0" "print g_vE.vA::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vB::vb" ".* = 0" "print g_vE.vB::vb"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vB::vx" ".* = 0" "print g_vE.vB::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vC::vc" ".* = 0" "print g_vE.vC::vc"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vC::vx" ".* = 0" "print g_vE.vC::vx"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE.vD::vd" ".* = 0" "print g_vE.vD::vd"
+
+    gdb_test "print g_vE.vD::vx" ".* = 0" "print g_vE.vD::vx"
+
+    gdb_test "print g_vE.vE::ve" ".* = 27" "print g_vE.vE::ve"
+
+    gdb_test "print g_vE.vE::vx" ".* = 28" "print g_vE.vE::vx"
+}
+
+#
+# Multiple virtual inheritance, print type definitions.
+#
+
+proc test_ptype_mvi {} {
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vD" "type = class vD : public virtual vB, public virtual vC \{\r\n\[ \]*public:\r\n\[ \]*int vd;\r\n\[ \]*int vx;\r\n.*\}" "ptype vD (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vD" "type = class vD : public virtual vB, public virtual vC \{\r\n\[ \]*public:\r\n\[ \]*int vd;\r\n\[ \]*int vx;\r\n.*\}" "ptype class vD (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vD" "type = class vD : public virtual vB, public virtual vC \{\r\n\[ \]*public:\r\n\[ \]*int vd;\r\n\[ \]*int vx;\r\n.*\}" "ptype g_vD (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype vE" "type = class vE : public virtual vD \{\r\n\[ \]*public:\r\n\[ \]*int ve;\r\n\[ \]*int vx;\r\n.*\}" "ptype vE (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype class vE" "type = class vE : public virtual vD \{\r\n\[ \]*public:\r\n\[ \]*int ve;\r\n\[ \]*int vx;\r\n.*\}" "ptype class vE (aCC)"
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "ptype g_vE" "type = class vE : public virtual vD \{\r\n\[ \]*public:\r\n\[ \]*int ve;\r\n\[ \]*int vx;\r\n.*\}" "ptype g_vE (aCC)"
+}
+
+#
+# Multiple virtual inheritance, print complete classes.
+#
+
+proc test_print_mvi_classes {} {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    # Print all members of g_vD.
+
+    setup_xfail_format "DWARF 1"
+    send_gdb "print g_vD\n"
+    gdb_expect {
+	-re ".* = \{\<class vB\> = \{\<class vA\> = \{va = 19, vx = 20\}, vb = 21, vx = 22, Virtual table at $hex\}, \<class vC\> = \{vc = 23, vx = 24, Virtual table at $hex\}, vd = 25, vx = 26, Virtual table at $hex\}\r\n$gdb_prompt $" {
+	    pass "print g_vD"
+	}
+	-re ".*invalid address 0x0.*$gdb_prompt $" {
+	    # Does not happen with gcc cygnus-2.4.5-930828
+	    fail "print g_vD (known bug with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print g_vD" }
+	timeout { fail "print g_vD (timeout)" ; return }
+    }
+
+    # Print all members of g_vE.
+
+    setup_xfail_format "DWARF 1"
+    gdb_test "print g_vE" ".* = \{\<class vD\> = \{\<class vB\> = \{\<class vA\> = \{va = 0, vx = 0\}, vb = 0, vx = 0, Virtual table at $hex\}, \<class vC\> = \{vc = 0, vx = 0, Virtual table at $hex\}, vd = 0, vx = 0, Virtual table at $hex\}, ve = 27, vx = 28, Virtual table at $hex\}" "print g_vE"
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    gdb_test "set language c++" ""
+    gdb_test "set width 0" ""
+
+    # Get the debug format for the compiled test case.
+
+    if { ![ runto_main] } {
+	gdb_suppress_tests;
+    } else {
+	get_debug_format
+    }
+
+    test_ptype_si
+    test_ptype_mi
+    test_ptype_vi
+    test_ptype_mvi
+
+    gdb_stop_suppressing_tests;
+    
+    if { ![ runto 'inheritance2(void)' ] } {
+	gdb_suppress_tests;
+    }
+
+    test_print_si_members
+    test_print_si_classes
+    test_print_mi_members
+    test_print_mi_classes
+    test_print_anon_union
+
+    gdb_stop_suppressing_tests;
+
+    if { ![ runto 'inheritance4(void)' ] } {
+	gdb_suppress_tests;
+    }
+
+    test_print_svi_members
+    test_print_svi_classes
+    test_print_mvi_members
+    test_print_mvi_classes
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.hp/misc-hp.cc b/gdb/testsuite/gdb.hp/misc-hp.cc
new file mode 100644
index 0000000..af46830
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/misc-hp.cc
@@ -0,0 +1,514 @@
+// Test various -*- C++ -*- things.
+
+typedef struct fleep fleep;
+struct fleep { int a; } s;
+
+// ====================== simple class structures  =======================
+
+struct default_public_struct {
+ // defaults to public:
+  int a;
+  int b;
+};
+
+struct explicit_public_struct {
+ public:
+  int a;
+  int b;
+};
+
+struct protected_struct {
+ protected:
+  int a;
+  int b;
+};
+
+struct private_struct {
+ private:
+  int a;
+  int b;
+};
+
+struct mixed_protection_struct {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+class public_class {
+ public:
+  int a;
+  int b;
+};
+
+class protected_class {
+ protected:
+  int a;
+  int b;
+};
+
+class default_private_class {
+ // defaults to private:
+  int a;
+  int b;
+};
+
+class explicit_private_class {
+ private:
+  int a;
+  int b;
+};
+
+class mixed_protection_class {
+ public:
+  int a;
+  int b;
+ private:
+  int c;
+  int d;
+ protected:
+  int e;
+  int f;
+ public:
+  int g;
+ private:
+  int h;
+ protected:
+  int i;
+};
+
+class const_vol_method_class {
+public:
+  int a;
+  int b;
+  int foo (int &) const;
+  int bar (int &) volatile;
+  int baz (int &) const volatile;
+};
+
+int const_vol_method_class::foo (int & ir) const
+{
+  return ir + 3;
+}
+int const_vol_method_class::bar (int & ir) volatile
+{
+  return ir + 4;
+}
+int const_vol_method_class::baz (int & ir) const volatile
+{
+  return ir + 5;
+}
+
+// ========================= simple inheritance ==========================
+
+class A {
+ public:
+  int a;
+  int x;
+};
+
+A g_A;
+
+class B : public A {
+ public:
+  int b;
+  int x;
+};
+
+B g_B;
+
+class C : public A {
+ public:
+  int c;
+  int x;
+};
+
+C g_C;
+
+class D : public B, public C {
+ public:
+  int d;
+  int x;
+};
+
+D g_D;
+
+class E : public D {
+ public:
+  int e;
+  int x;
+};
+
+E g_E;
+
+class class_with_anon_union
+{
+ public:
+  int one;
+  union
+  {
+    int a;
+    long b;
+  };
+};
+
+class_with_anon_union g_anon_union;
+
+void inheritance2 (void)
+{
+}
+
+void inheritance1 (void)
+{
+  int ival;
+  int *intp;
+
+  // {A::a, A::x}
+
+  g_A.A::a = 1;
+  g_A.A::x = 2;
+
+  // {{A::a,A::x},B::b,B::x}
+
+  g_B.A::a = 3;
+  g_B.A::x = 4;
+  g_B.B::b = 5;
+  g_B.B::x = 6;
+
+  // {{A::a,A::x},C::c,C::x}
+
+  g_C.A::a = 7;
+  g_C.A::x = 8;
+  g_C.C::c = 9;
+  g_C.C::x = 10;
+
+  // {{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_D, ival = 11;
+       intp < ((int *) &g_D + sizeof (g_D) / sizeof (int));
+       intp++, ival++)
+    {
+      *intp = ival;
+    }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 11;  (g_D.A::a = 11; is ambiguous)
+  // ????? = 12;  (g_D.A::x = 12; is ambiguous)
+  g_D.B::b = 13;
+  g_D.B::x = 14;
+  // ????? = 15;
+  // ????? = 16;
+  g_D.C::c = 17;
+  g_D.C::x = 18;
+  g_D.D::d = 19;
+  g_D.D::x = 20;
+
+
+  // {{{{A::a,A::x},B::b,B::x},{{A::a,A::x},C::c,C::x},D::d,D::x}},E::e,E::x}
+
+  // The following initialization code is non-portable, but allows us
+  // to initialize all members of g_D until we can fill in the missing
+  // initialization code with legal C++ code.
+
+  for (intp = (int *) &g_E, ival = 21;
+       intp < ((int *) &g_E + sizeof (g_E) / sizeof (int));
+       intp++, ival++)
+  {
+    *intp = ival;
+  }
+
+  // Overlay the nonportable initialization with legal initialization.
+
+  // ????? = 21;  (g_E.A::a = 21; is ambiguous)
+  // ????? = 22;  (g_E.A::x = 22; is ambiguous)
+  g_E.B::b = 23;
+  g_E.B::x = 24;
+  // ????? = 25;
+  // ????? = 26;
+  g_E.C::c = 27;
+  g_E.C::x = 28;
+  g_E.D::d = 29;
+  g_E.D::x = 30;
+  g_E.E::e = 31;
+  g_E.E::x = 32;
+
+  g_anon_union.one = 1;
+  g_anon_union.a = 2;
+
+  inheritance2 ();	
+}
+
+// ======================== virtual base classes=========================
+
+class vA {
+ public:
+  int va;
+  int vx;
+};
+
+vA g_vA;
+
+class vB : public virtual vA {
+ public:
+  int vb;
+  int vx;
+};
+
+vB g_vB;
+
+class vC : public virtual vA {
+ public:
+  int vc;
+  int vx;
+};
+
+vC g_vC;
+
+class vD : public virtual vB, public virtual vC {
+ public:
+  int vd;
+  int vx;
+};
+
+vD g_vD;
+
+class vE : public virtual vD {
+ public:
+  int ve;
+  int vx;
+};
+
+vE g_vE;
+
+void inheritance4 (void)
+{
+}
+
+void inheritance3 (void)
+{
+  int ival;
+  int *intp;
+
+  // {vA::va, vA::vx}
+
+  g_vA.vA::va = 1;
+  g_vA.vA::vx = 2;
+
+  // {{vA::va, vA::vx}, vB::vb, vB::vx}
+
+  g_vB.vA::va = 3;
+  g_vB.vA::vx = 4;
+  g_vB.vB::vb = 5;
+  g_vB.vB::vx = 6;
+
+  // {{vA::va, vA::vx}, vC::vc, vC::vx}
+
+  g_vC.vA::va = 7;
+  g_vC.vA::vx = 8;
+  g_vC.vC::vc = 9;
+  g_vC.vC::vx = 10;
+
+  // {{{{vA::va, vA::vx}, vB::vb, vB::vx}, vC::vc, vC::vx}, vD::vd,vD::vx}
+
+  g_vD.vA::va = 11;
+  g_vD.vA::vx = 12;
+  g_vD.vB::vb = 13;
+  g_vD.vB::vx = 14;
+  g_vD.vC::vc = 15;
+  g_vD.vC::vx = 16;
+  g_vD.vD::vd = 17;
+  g_vD.vD::vx = 18;
+
+
+  // {{{{{vA::va,vA::vx},vB::vb,vB::vx},vC::vc,vC::vx},vD::vd,vD::vx},vE::ve,vE::vx}
+
+  g_vD.vA::va = 19;
+  g_vD.vA::vx = 20;
+  g_vD.vB::vb = 21;
+  g_vD.vB::vx = 22;
+  g_vD.vC::vc = 23;
+  g_vD.vC::vx = 24;
+  g_vD.vD::vd = 25;
+  g_vD.vD::vx = 26;
+  g_vE.vE::ve = 27;
+  g_vE.vE::vx = 28;
+
+  inheritance4 ();	
+}
+
+// ======================================================================
+
+class Base1 {
+ public:
+  int x;
+  Base1(int i) { x = i; }
+};
+
+class Foo
+{
+ public:
+  int x;
+  int y;
+  static int st;
+  Foo (int i, int j) { x = i; y = j; }
+  int operator! ();
+  operator int ();
+  int times (int y);
+};
+
+class Bar : public Base1, public Foo {
+ public:
+  int z;
+  Bar (int i, int j, int k) : Base1 (10*k), Foo (i, j) { z = k; }
+};
+
+class ClassWithEnum {
+public:
+  enum PrivEnum { red, green, blue, yellow = 42 };
+  PrivEnum priv_enum;
+  int x;
+};
+
+int Foo::operator! () { return !x; }
+
+int Foo::times (int y) { return x * y; }
+
+int Foo::st = 100;
+
+Foo::operator int() { return x; }
+
+Foo foo(10, 11);
+Bar bar(20, 21, 22);
+
+class Contains_static_instance
+{
+ public:
+  int x;
+  int y;
+  Contains_static_instance (int i, int j) { x = i; y = j; }
+  static Contains_static_instance null;
+};
+
+Contains_static_instance Contains_static_instance::null(0,0);
+Contains_static_instance csi(10,20);
+
+class Contains_nested_static_instance
+{
+ public:
+  class Nested
+  {
+   public:
+    Nested(int i) : z(i) {}
+    int z;
+    static Contains_nested_static_instance xx;
+  };
+
+  Contains_nested_static_instance(int i, int j) : x(i), y(j) {}
+
+  int x;
+  int y;
+
+  static Contains_nested_static_instance null;
+  static Nested yy;
+};
+
+Contains_nested_static_instance Contains_nested_static_instance::null(0, 0);
+Contains_nested_static_instance::Nested Contains_nested_static_instance::yy(5);
+Contains_nested_static_instance
+  Contains_nested_static_instance::Nested::xx(1,2);
+Contains_nested_static_instance cnsi(30,40);
+
+typedef struct {
+  int one;
+  int two;
+} tagless_struct;
+tagless_struct v_tagless;
+
+/* Try to get the compiler to allocate a class in a register.  */
+class small {
+ public:
+  int x;
+  int method ();
+};
+int small::method ()
+{
+  return x + 5;
+}
+void marker_reg1 () {}
+
+int
+register_class ()
+{
+  /* We don't call any methods for v, so gcc version cygnus-2.3.3-930220
+     might put this variable in a register.  This is a lose, though, because
+     it means that GDB can't call any methods for that variable.  */
+  register small v;
+
+  int i;
+
+  /* Perform a computation sufficiently complicated that optimizing compilers
+     won't optimized out the variable.  If some compiler constant-folds this
+     whole loop, maybe using a parameter to this function here would help.  */
+  v.x = 0;
+  for (i = 0; i < 13; ++i)
+    v.x += i;
+  --v.x; /* v.x is now 77 */
+  marker_reg1 ();
+  return v.x + 5;
+}
+
+int
+main()
+{
+#ifdef usestubs
+  set_debug_traps();
+  breakpoint();
+#endif
+  inheritance1 ();
+  inheritance3 ();
+  register_class ();
+
+  /* FIXME: pmi gets optimized out.  Need to do some more computation with
+     it or something.  (No one notices, because the test is xfail'd anyway,
+     but that probably won't always be true...).  */
+  int Foo::* pmi = &Foo::y;
+
+  /* Make sure the AIX linker doesn't remove the variable.  */
+  v_tagless.one = 5;
+
+  /* Class with enumeration inside it */ 
+  ClassWithEnum obj_with_enum;
+  obj_with_enum.priv_enum = ClassWithEnum::green;
+
+  return foo.*pmi;
+}
+
+/* Create an instance for some classes, otherwise they get optimized away.  */
+
+default_public_struct default_public_s;
+explicit_public_struct explicit_public_s;
+protected_struct protected_s;
+private_struct private_s;
+mixed_protection_struct mixed_protection_s;
+public_class public_c;
+protected_class protected_c;
+default_private_class default_private_c;
+explicit_private_class explicit_private_c;
+mixed_protection_class mixed_protection_c;
diff --git a/gdb/testsuite/gdb.hp/more-steps.c b/gdb/testsuite/gdb.hp/more-steps.c
new file mode 100644
index 0000000..c5ba1e2
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/more-steps.c
@@ -0,0 +1,140 @@
+/* BeginSourceFile more_steps.c
+
+  This file creates a lot of threads which then execute
+  in parallel, so that wdb can be tested on handling
+  simultaneous thread events.
+
+  To compile:
+
+      cc -Ae +DA1.0 -g -o more_steps -lpthread more_steps.c
+
+  To run:
+  
+     more_threads
+*/
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+#include <pthread.h>
+
+#define TRUE 1
+#define FALSE 0
+#define N_THREADS 3
+#define PHASES 3
+
+typedef enum {
+  ZERO,
+  ONE,
+  TWO,
+  THREE
+} phase_t;
+
+/* Uncomment to turn on debugging output */
+/* #define DEBUG  */
+
+/* Locks.
+ */
+int lock_one; /* Main W, others R */
+int lock_two; /* ditto */
+int lock_end[ N_THREADS ]; /* Main R, others R[i] */
+int phase[ N_THREADS ];
+
+/* Routine for each thread to run.
+ */
+void *spin( vp )
+    void * vp;
+{
+    int me = (int) vp;
+    int i;
+
+    lock_end[ me ] = TRUE;
+
+    phase[ me ] = ONE;
+
+    while( lock_one );
+
+    phase[ me ] = TWO;
+
+    while( lock_two );
+
+    phase[ me ] = THREE;
+
+    lock_end[ me ] = FALSE;
+}
+
+void
+do_pass()
+{
+    int i;
+    pthread_t t[ N_THREADS ];
+    int err;
+    int done;
+
+    /* Start N_THREADS threads, then join them so
+     * that they are terminated.
+     */
+    for( i = 0; i < N_THREADS; i++ ) {
+        err = pthread_create( &t[i], NULL, spin, (void *)i );
+        if( err != 0 ) {
+            printf( "== Start/stop, error in thread %d create\n", i );
+        }
+    }
+
+    /* Do phase 1.
+     */
+    lock_one = FALSE;
+
+    /* Do phase 2.
+     */
+    lock_two = FALSE;
+    
+    /* Be done.
+     */
+    done = 0;
+    while( !done ) {
+
+       /* Be optimistic.
+        */
+       done = 1;
+       for( i = 0; i < N_THREADS; i++ ) {
+           if( lock_end[i] ) {
+               /* Thread "i" is not ready yet.
+                */
+               done = 0;
+               break;
+           }
+       }
+    }
+    
+    /* Finish up
+     */
+    for( i = 0; i < N_THREADS; i++ ) {
+        err = pthread_join(t[i], NULL );    /* Line 105 */
+        if( err != 0 ) {                    /* Line 106 */
+            printf( "== Start/stop, error in thread %d join\n", i );
+        }
+    }
+
+    i = 10;  /* Line 109.  Null line for setting bpts on. */
+}
+
+main( argc, argv )
+int    argc;
+char **argv;
+{
+    int i;
+    
+    /* Init
+     */
+    lock_one = TRUE;
+    lock_two = TRUE;
+    for( i = 0; i < N_THREADS; i++ ) {
+        lock_end[i] = TRUE;
+        phase[i]    = ZERO;
+    }
+    
+    do_pass();
+    return(0);
+}
diff --git a/gdb/testsuite/gdb.hp/more-steps.exp b/gdb/testsuite/gdb.hp/more-steps.exp
new file mode 100644
index 0000000..320a0d6
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/more-steps.exp
@@ -0,0 +1,152 @@
+# more-steps.exp -- Expect script to test gdb's ability to step threaded pgms
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+#    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+#    return 0
+#}
+
+set testfile more-steps
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# To build the executable we need to link against the thread library.
+#
+#     cc -Ae -g -o more-steps -lpthread more-steps.c
+#
+#compile "${srcfile} -Ae -g -lpthread -o ${binfile}"
+
+if {$gcc_compiled == 0} {
+    set additional_flags "additional_flags=-Ae"
+} else {
+    set additional_flags ""
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}.o" object [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    if { [gdb_compile "${binfile}.o" "${binfile}" executable  {debug "additional_flags=-lpthread"}] != ""} {
+	gdb_suppress_entire_file "Testcase link failed, so all tests in this file will automatically fail."
+    }
+} else {
+    remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+}
+#remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+
+
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+set oldtimeout $timeout
+set timeout [expr "$timeout + 300"]
+set oldverbose $verbose
+#set verbose 40
+
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+#
+# NOTE: to pass a literal "$", "/" or "*" (etc.) to gdb_test, 
+#       remember that the pattern will be escaped once and 
+#       $-evaluated twice:
+#
+#          "\\\*" matches "\*"
+#          "\$"  matches "$"
+#
+proc fix_timeout {} {
+    gdb_test "p \$pc" ".*" ""
+}
+
+#=========================
+#
+# Simple sanity test first.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# First, step in the main thread.
+#
+gdb_test "b do_pass" ".*Breakpoint 1.*" ""
+gdb_test "r" ".*Breakpoint 1.*do_pass.*" ""
+
+# Breaks as well as nexts to make
+# sure we can handle simultaneous hit
+# of bpt and step, as well as stepping
+# past bpts.
+#
+gdb_test "tb 87" ".*Breakpoint 2.*" ""
+gdb_test "tb 91" ".*Breakpoint 3.*" ""
+gdb_test "tb 96" ".*Breakpoint 4.*" ""
+gdb_test "tb 113" ".*Breakpoint 5.*" ""
+gdb_test "c" ".*do_pass.*87.*" "87"
+gdb_test "n" ".*do_pass.*91.*" "n"
+
+# This only gets a number, as it doesn't
+# hit a bpt.
+#
+gdb_test "n" ".*95.*" "n"
+
+gdb_test "n" ".*do_pass.*96.*" "n"
+gdb_test "c" ".*do_pass.*113.*" "c"
+gdb_test "c" ".*Program exited normally.*" "c"
+
+# Now step in a thread
+#
+gdb_test "r" ".*Breakpoint.*do_pass.*" "do_pass"
+gdb_test "until 87" ".*do_pass.*87.*" "until"
+gdb_test "thr 4" ".*Switching to thread 4.*spin.*56.*" "switch"
+gdb_test "tb 60 thr 4" ".*Breakpoint.*" ""
+
+# If we do "next" now, all the other threads 
+# can finish!
+#
+gdb_test "n"    ".*spin.*60.*" ""
+gdb_test "i th" ".*\\\* 4 sys.*spin.*1 sys.*do_pass.*" "still in 4"
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
+
diff --git a/gdb/testsuite/gdb.hp/namespace.cc b/gdb/testsuite/gdb.hp/namespace.cc
new file mode 100644
index 0000000..53d5bd6
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/namespace.cc
@@ -0,0 +1,103 @@
+namespace AAA {
+  char c;
+  int i;
+  int A_foo (int);
+  char foo (char);
+  class inA {
+  public:
+    int xx;
+    int fum (int);
+  };
+};
+
+int AAA::inA::fum (int i)
+{
+  return 10 + i;
+}
+
+namespace BBB {
+  char c;
+  int i;
+  int B_foo (int);
+  char foo (char);
+
+  namespace CCC {
+    char foo (char);
+  };
+
+  class Class {
+  public:
+    char foo (char);
+    int dummy;
+  };
+};
+
+int AAA::A_foo (int x)
+{
+  return 2 * x;
+}
+
+char AAA::foo (char c)
+{
+  return 'a';
+}
+
+
+int BBB::B_foo (int x)
+{
+  return 3 * x;
+}
+
+char BBB::foo (char c)
+{
+  return 'b';
+}
+
+char BBB::CCC::foo (char c)
+{
+  return 'z';
+}
+
+char BBB::Class::foo (char c)
+{
+  return 'o';
+}
+
+void marker1(void)
+{
+  return;
+}
+
+
+int main ()
+{
+  using AAA::inA;
+  char c1;
+
+  using namespace BBB;
+  
+  c1 = foo ('x');
+  c1 = AAA::foo ('x');
+  c1 = BBB::CCC::foo ('m');
+  
+  inA ina;
+
+  ina.xx = 33;
+
+  int y;
+
+  y = AAA::A_foo (33);
+  y += B_foo (44);
+
+  BBB::Class cl;
+
+  c1 = cl.foo('e');
+
+  marker1();
+  
+}
+
+  
+
+
+
diff --git a/gdb/testsuite/gdb.hp/namespace.exp b/gdb/testsuite/gdb.hp/namespace.exp
new file mode 100644
index 0000000..1708db8
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/namespace.exp
@@ -0,0 +1,195 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# tests for namespaces
+# Written by Satish Pai <pai@apollo.hp.com> 1997-07-23
+
+# This file is part of the gdb testsuite
+
+# Note: These tests are geared to the HP aCC compiler,
+# which has an idiosyncratic way of emitting debug info
+# for namespaces.
+
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+
+#
+# test running programs
+#
+
+set prms_id 0
+set bug_id 0
+
+set testfile "namespace"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will a
+utomatically fail."
+}
+
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "break marker1\n" ; gdb_expect -re ".*$gdb_prompt $"
+    send_gdb "cont\n"
+    gdb_expect {
+        -re "Break.* marker1 \\(\\) at .*:$decimal.*$gdb_prompt $" {
+            send_gdb "up\n"
+            gdb_expect {
+                -re ".*$gdb_prompt $" { pass "up from marker1" }
+                timeout { fail "up from marker1" }
+            }
+        }
+        -re "$gdb_prompt $" { fail "continue to marker1"  }
+        timeout { fail "(timeout) continue to marker1"  }
+    }
+
+# Access a data item inside a namespace using colons and
+# single quotes :-(
+
+send_gdb "print 'AAA::c'\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 0 '\\\\000'\r\n$gdb_prompt $" { pass "print 'AAA::c'" }
+   -re ".*$gdb_prompt $" { fail "print 'AAA::c'" }
+   timeout { fail "(timeout) print 'AAA::c'" }
+}
+
+# An object declared using "using".
+
+send_gdb "print ina\n"
+gdb_expect {
+   -re "\\$\[0-9\]+ = {xx = 33}.*$gdb_prompt $" {
+      pass "print ina"
+   }
+   -re ".*$gdb_prompt $" { fail "print ina" }
+   timeout { fail "(timeout) print ina" }
+}
+
+send_gdb "ptype ina\n"
+gdb_expect {
+   -re "type = class AAA::inA \{\r\n\[ \]*public:\r\n\[ \]*int xx;\r\n\[ \]*\r\n\[ \]*int fum\\(int\\);\r\n\}\r\n$gdb_prompt $" {
+       pass "ptype ina"
+   }
+   -re ".*$gdb_prompt $" { fail "ptype ina" }
+   timeout { fail "(timeout) ptype ina" }
+}
+
+# Check all functions are known to GDB
+
+send_gdb "info func foo\n"
+gdb_expect {
+   -re "All functions.*File.*namespace.cc:\r\nint AAA::A_foo\\(int\\);\r\nint BBB::B_foo\\(int\\);\r\nchar AAA::foo\\(char\\);\r\nchar BBB::foo\\(char\\);\r\nchar BBB::CCC::foo\\(char\\);\r\nchar BBB::Class::foo\\(char\\);\r\n$gdb_prompt $" {
+       pass "info func foo"
+   }    
+   -re ".*$gdb_prompt $" { fail "info func foo" }
+   timeout { fail "(timeout) info func foo" }
+}
+
+# Call a function in a namespace
+
+send_gdb "print 'AAA::foo'('x')\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 97 'a'\r\n$gdb_prompt $" {
+       pass "print 'AAA::foo'('x')"
+   }
+   -re ".*$gdb_prompt $" { fail "print 'AAA::foo'('x')" }
+   timeout { fail "(timeout) print 'AAA::foo'('x')" }
+}
+       
+# Break on a function in a namespace
+
+send_gdb "break AAA::foo\n"
+gdb_expect {
+    -re "Breakpoint.*at $hex: file.*namespace.cc, line 42\\.\r\n$gdb_prompt $" {
+         pass "break AAA::foo"
+    }    
+   -re ".*$gdb_prompt $" { fail "break AAA::foo" }
+   timeout { fail "(timeout) break AAA::foo" }
+}
+
+# Call a function in a nested namespace
+
+send_gdb "print 'BBB::CCC::foo'('x')\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = 122 'z'\r\n$gdb_prompt $" {
+       pass "print 'BBB::CCC::foo'('x')"
+   }
+   -re ".*$gdb_prompt $" { fail "print 'BBB::CCC::foo'('x')" }
+   timeout { fail "(timeout) print 'BBB::CCC::foo'('x')" }
+}
+       
+# Break on a function in a nested namespace
+
+send_gdb "break BBB::CCC::foo\n"
+gdb_expect {
+    -re "Breakpoint.*at $hex: file.*namespace.cc, line 58\\.\r\n$gdb_prompt $" {
+         pass "break BBB::CCC::foo"
+    }    
+   -re ".*$gdb_prompt $" { fail "break BBB::CCC::foo" }
+   timeout { fail "(timeout) break BBB::CCC::foo" }
+}
+
+# Print address of a function in a class in a namespace
+
+send_gdb "print 'BBB::Class'::foo\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \{char \\(BBB::Class \\*, char\\)\} $hex <BBB::Class::foo\\(char\\)>\r\n$gdb_prompt $" {
+       pass "print 'BBB::Class'::foo"
+   }
+   -re ".*$gdb_prompt $" { fail "print 'BBB::Class'::foo" }
+   timeout { fail "(timeout) print 'BBB::Class'::foo" }
+}
+
+# Break on a function in a class in a namespace
+
+send_gdb "break BBB::Class::foo\n"
+gdb_expect {
+    -re "Breakpoint.*at $hex: file.*namespace.cc, line 63\\.\r\n$gdb_prompt $" {
+         pass "break BBB::Class::foo"
+    }    
+   -re ".*$gdb_prompt $" { fail "break BBB::Class::foo" }
+   timeout { fail "(timeout) break BBB::Class::foo" }
+}
+
diff --git a/gdb/testsuite/gdb.hp/optimize.c b/gdb/testsuite/gdb.hp/optimize.c
new file mode 100644
index 0000000..2a8daa8
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/optimize.c
@@ -0,0 +1,76 @@
+/* Source for debugging optimimzed code test.
+
+    cc -g -O -o optimize optimize.c
+*/
+int callee();
+int test_opt;
+
+int main()
+{
+   int a,b,c,d,e,f,g,h;
+
+   a = 10;;
+
+   /* Value propagate
+    */
+   b = 2 * a + 1;
+   c = 3 * b + 2;
+
+   /* Re-use expressions
+    */
+   d = (2 * a + 1) * (3 * b + 2);
+   e = (2 * a + 1) * (3 * b + 2);
+
+   /* Create dead stores--do lines still exist?
+    */
+   d = (2 * a + 1) * (3 * b + 2);
+   e = (2 * a + 1) * (3 * b + 2);
+   d = (2 * a + 1) * (3 * b + 2);
+   e = (2 * a + 1) * (3 * b + 2);
+
+   /* Alpha and psi motion
+    */
+   if( test_opt ) {
+       f = e - d;
+       f = f--;
+   }
+   else {
+       f = e - d;
+       f = f + d * e;
+   }
+
+   /* Chi and Rho motion
+    */
+   h = 0;
+   do {
+       h++;
+       a = b * c + d * e;  /* Chi */
+       f = f + d * e;
+       g = f + d * e;      /* Rho */
+       callee( g+1 );
+       test_opt = (test_opt != 1);  /* Cycles */
+   } while( g && h < 10);
+
+   /* Opps for tail recursion, unrolling,
+    * folding, evaporating
+    */
+   for( a = 0; a < 100; a++ ) {
+       callee( callee ( callee( a )));
+       callee( callee ( callee( a )));
+       callee( callee ( callee( a )));
+   }
+
+   return callee( test_opt );
+}
+
+/* defined late to keep line numbers the same
+*/
+int callee( x )
+    int x;      /* not used! */
+{
+    test_opt++; /* side effect */
+
+    return test_opt;
+}
+
+/* end */
\ No newline at end of file
diff --git a/gdb/testsuite/gdb.hp/optimize.exp b/gdb/testsuite/gdb.hp/optimize.exp
new file mode 100644
index 0000000..34606eb
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/optimize.exp
@@ -0,0 +1,144 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# optimize.exp -- Expect script for testing apps compiled with -O
+
+global timeout
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set testfile optimize
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+# Vanilla -O, which is the same as +O2
+#
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug optimize=+O2}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+send_gdb "file $binfile\n"
+gdb_expect {
+    -re ".*no debugging symbols found.*$gdb_prompt $" {
+        fail "Didn't find debug symbols; CHFts23488" 
+    }
+    -re ".*No header section (PXDB data).*$gdb_prompt $" {
+        fail "pointless warning"
+    }
+    -re ".*done.*$gdb_prompt $" {
+        pass "load debug symbols"
+    }
+    timeout { fail "timeout on file" }
+}
+
+# Two lines at the same place after opt.
+#
+gdb_test "b 28"   ".*" ""
+gdb_test "b 26"   ".*also set at.*" "same line"
+
+gdb_test "b 47"   ".*" ""
+gdb_test "b 48"   ".*also set at.*" "same line"
+
+gdb_test "tb main" ".*" ""
+
+set old_timeout $timeout
+set timeout [expr "$timeout + 200"]
+send_gdb "r\n"
+gdb_expect {
+    -re ".*No header section (PXDB data).*$gdb_prompt $" {
+        fail "pointless warning"
+    }
+    -re ".*main.*2\[12].*$gdb_prompt $" {
+        # All the lines before line 21 or 22 are 
+        # evaporated by the compiler.
+        # 
+        pass "hit main"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "didn't hit main"
+    }
+    timeout { fail "timeout on run" }
+}
+set timeout $old_timeout
+
+gdb_test "c" ".*Breakpoint 1.*33.*" ""
+gdb_test "c" ".*51.*"               ""
+gdb_test "cle" ".*Deleted breakpoints.*" "set 2, so del 2"
+
+gdb_test "b callee" ".*"  ""
+gdb_test "c" ".*callee.*" "hit called rtn"
+
+gdb_exit
+
+# +O4, don't use -g
+#
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {optimize=+O4}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+send_gdb "file $binfile\n"
+gdb_expect {
+    -re ".*no debugging symbols found.*$gdb_prompt $" {
+        pass "Didn't find debug symbols, as expected"
+    }
+    -re ".*No header section (PXDB data).*$gdb_prompt $" {
+        fail "pointless warning"
+    }
+    -re ".*done.*$gdb_prompt $" {
+        fail "Somehow found debug symbols--make this a pass?"
+    }
+    timeout { fail "timeout on file" }
+}
+
+gdb_test "b main"   ".*" ""
+gdb_test "b callee" ".*" ""
+gdb_test "r"        ".*Breakpoint 1.*main.*" ""
+gdb_test "si 3"     ".*main.*" "steps"
+gdb_test "x/4i \$pc" ".*main.*main+4.*main+8.*" ""
+gdb_test "c"        ".*callee.*" "hit bp"
+gdb_test "disas"    ".*callee.*callee+4.*callee+12.*" ""
+gdb_test "si"       ".*callee.*" ""
+gdb_test "fin"      ".*Run till exit.*main.*" "finish"
+gdb_test "x/i \$pc" ".*main+.*" "back in main"
+gdb_exit
+
+#remote_exec build "rm -f ${binfile}"
+return 0
diff --git a/gdb/testsuite/gdb.hp/pxdb.c b/gdb/testsuite/gdb.hp/pxdb.c
new file mode 100644
index 0000000..e3e3fc2
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/pxdb.c
@@ -0,0 +1,20 @@
+#include <stdio.h>
+
+int callee( x )
+int x;
+{
+    int y = x * x;
+    return (y - 2);
+}
+
+main()
+{
+    int i;
+    for (i = 1; i < 10; i++)
+        {
+            printf( "%d ", callee( i ));
+            
+        }
+    printf( " Goodbye!\n" );
+    
+}
diff --git a/gdb/testsuite/gdb.hp/pxdb.exp b/gdb/testsuite/gdb.hp/pxdb.exp
new file mode 100644
index 0000000..c8b3ace
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/pxdb.exp
@@ -0,0 +1,114 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+# This file is part of the gdb testsuite
+
+
+# pxdb.exp   Test that gdb calls pxdb on an application
+#            built without it.
+#
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile pxdb
+set srcfile ${testfile}.c
+set objfile ${objdir}/${subdir}/${testfile}.o
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+# To build a non-pxdb-ed file, use
+#
+#     <compile to .o file>
+#     export LD_PXDB /dev/null
+#     ld -o hello_no_pxdb hello.o /opt/langtools/lib/end.o /usr/ccs/lib/crt0.o -lc
+#
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${objfile}" object {debug}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+#
+# use this to debug:
+#log_user 1
+
+
+# Following should get the error message:
+#
+#      ld: (Warning) Can't exec pxdb using path: /dev/null
+#
+
+set cmdline  "ksh -c \"LD_PXDB=/dev/null ld -o ${binfile} ${objfile} /usr/ccs/lib/crt0.o /opt/langtools/lib/end.o -lc\""
+
+remote_exec build "rm ${binfile}"
+remote_exec build $cmdline
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We expect to see this:
+#
+#  "warning: File not processed by pxdb--about to process now.
+#  "
+#  ".
+#  "Procedures: 7
+#  "Files: 2
+#  "Reading symbols from ~/c_code.dir/hello_no_pxdb...done.
+#  "(gdb)
+#
+send_gdb "file ${binfile}\n"
+gdb_expect {
+
+    -re ".*warning: File not processed by pxdb.*Procedures: \[0-9\]+.*done.*$gdb_prompt $"\
+                            { pass "PXDB call"        }
+
+    -re "$gdb_prompt $"         { fail "Didn't call pxdb" }
+
+    timeout                 { fail "call pxdb (timeout)" }
+}
+
+# Make sure the new data makes sense
+#
+if { ![runto callee] } then { return }
+
+send_gdb "print x\n"
+gdb_expect {
+   -re ".*= 1.*$gdb_prompt $"    { pass "Good data after pxdb call" }
+   -re ".*$gdb_prompt $"         { fail "No data after pxdb call" }
+   timeout { fail "(timeout)" }
+}
+
+gdb_exit
+return 0
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.hp/quicksort.c b/gdb/testsuite/gdb.hp/quicksort.c
new file mode 100644
index 0000000..b44b828
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/quicksort.c
@@ -0,0 +1,284 @@
+/* BeginSourceFile quicksort.c
+
+  This file is take from the DDE test system.  It spawns six
+  threads to do a sort of an array of random numbers.
+
+  The locations marked "quick N" are used in the test "quicksort.exp".
+
+  The locations marked "att N" are used in the test "attach.exp".
+
+  To compile:
+
+      cc -Ae +DA1.0 -g -o quicksort -lpthread quicksort.c
+
+  To run:
+  
+     quicksort     --normal run
+     quicksort 1   --waits before starting to allow attach
+*/
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+#include <pthread.h>
+
+#define TRUE 1
+#define FALSE 0
+#define SORTSET 100000
+
+/* Uncomment to turn on debugging output */
+/* #define QUICK_DEBUG  */
+
+/* Uncomment to turn on wait on each thread create */
+/* #define THREAD_WAIT */
+
+/* Fewer than SORT_DIRECT items are sorted with an insertion sort. */
+#define SORT_DIRECT 20
+
+/* Work at this depth or less generates a separate work item. */
+#define DEFER_DEPTH 6
+
+/* Workpile controller */
+typedef void (*work_proc_t)(void *);
+
+typedef struct workpile_struct {
+	pthread_mutex_t lock;	       /* mutex for this structure */
+	pthread_cond_t work_wait;      /* workers waiting for work */
+	pthread_cond_t finish_wait;    /* to wait for workers to finish */
+	int max_pile;		       /* length of workpile array */
+	work_proc_t worker_proc;       /* work procedure */
+	int n_working;		       /* number of workers working */
+	int n_waiting;		       /* number of workers waiting for work */
+	int n_pile;		       /* number of pointers in the workpile */
+	int inp;		       /* FIFO input pointer */
+	int outp;		       /* FIFO output pointer */
+	void *pile[1];		       /* array of pointers - the workpile */
+} *workpile_t;
+
+typedef struct {
+	float *data;		   /* Array to sort */
+	int n;			   /* Number of elements in the array */
+	int depth;		   /* Depth of recursion */
+	workpile_t wp;		   /* Workpile to use */
+} quick_sort_args;
+
+/* True if waiting for attach.
+ */
+int wait_here = FALSE;
+
+static workpile_t quick_sort_workpile = NULL;
+
+void *worker(void * wptr);
+
+/* Allocates and initializes a workpile that holds max_pile entries.
+ * worker_proc is called to process each work item on the queue.
+ */
+workpile_t
+work_init(int max_pile, work_proc_t worker_proc, int n_threads)
+{
+	int err;
+	pthread_t t;
+	workpile_t wp = (workpile_t)
+		malloc(sizeof (struct workpile_struct) +
+			(max_pile * sizeof (void *)));
+
+	if (wp != NULL) {
+		pthread_mutex_init(&wp->lock, NULL);
+		pthread_cond_init(&wp->work_wait, NULL);
+		pthread_cond_init(&wp->finish_wait, NULL);
+		wp->max_pile = max_pile;
+		wp->worker_proc = worker_proc;
+		wp->n_working = wp->n_waiting = wp->n_pile = 0;
+		wp->inp = wp->outp = 0;
+		while (n_threads--) {
+			err = pthread_create(&t, NULL,
+			      worker, (void *)&wp);
+#ifdef QUICK_DEBUG
+                        printf( "== Quicksort: created new thread\n" );
+#ifdef THREAD_WAIT
+                        if( n_threads > 0 ) {
+                            int i;
+                        printf( "== Quicksort: waiting on user input of an integer\n" );
+                            scanf( "%d", &i );
+                            printf( "== Quicksort: continuing with quicksort\n" );
+                        }
+#endif
+#endif
+
+			assert(err == 0);    /* quick 1 */
+		}
+                /* All the threads have now been created.
+                 */
+                assert( n_threads == -1 );         /* att 1 */
+                if( wait_here ) {
+#ifdef QUICK_DEBUG
+                    printf( "== Quicksort: waiting for attach\n" );
+#endif
+                    sleep( 25 );
+                }
+                wait_here = 99;              /* att 2, otherwise useless */
+	}
+	return (wp);                         /* quick 2 */
+}
+
+/*
+ * Worker thread routine. Continuously looks for work, calls the
+ * worker_proc associated with the workpile to do work.
+ */
+void *
+worker(void * wptr)
+{
+        workpile_t wp;
+	void *ptr;
+
+        wp = * (workpile_t *) wptr;
+
+	pthread_mutex_lock(&wp->lock);
+	wp->n_working++;
+	for (;;) {
+		while (wp->n_pile == 0) {								/* wait for new work */
+			if (--wp->n_working == 0)
+				pthread_cond_signal(&wp->finish_wait);
+			wp->n_waiting++;
+			pthread_cond_wait(&wp->work_wait, &wp->lock);
+			wp->n_waiting--;       /* quick 3 */
+			wp->n_working++;
+		}
+		wp->n_pile--;
+		ptr = wp->pile[wp->outp];
+		wp->outp = (wp->outp + 1) % wp->max_pile;
+		pthread_mutex_unlock(&wp->lock);
+		/* Call application worker routine. */
+		(*wp->worker_proc)(ptr);
+		pthread_mutex_lock(&wp->lock);  /* quick 4 */
+	}
+	/* NOTREACHED */
+}
+
+/* Puts ptr in workpile. Called at the outset, or within a worker. */
+void
+work_put(workpile_t wp, void *ptr)
+{
+	pthread_mutex_lock(&wp->lock);
+	if (wp->n_waiting) {
+		/* idle workers to be awakened */
+		pthread_cond_signal(&wp->work_wait);
+	}
+	assert(wp->n_pile != wp->max_pile);									/* check for room */
+	wp->n_pile++;
+	wp->pile[wp->inp] = ptr;
+	wp->inp = (wp->inp + 1) % wp->max_pile;
+	pthread_mutex_unlock(&wp->lock);
+}
+
+
+/* Wait until all work is done and workers quiesce. */
+void
+work_wait(workpile_t wp)
+{
+	pthread_mutex_lock(&wp->lock);
+	while(wp->n_pile !=0 || wp->n_working != 0)
+		pthread_cond_wait(&wp->finish_wait, &wp->lock);
+	pthread_mutex_unlock(&wp->lock);
+}
+
+void
+quick_sort_aux(float *data, int n, int depth, workpile_t wp, int deferrable)
+{
+	int i,j;
+
+	/* If array small, use insertion sort */
+	if (n <= SORT_DIRECT) {
+		for (j = 1; j < n; j++) {
+			/* data[0..j-1] in sort; find a spot for data[j] */
+			float key = data[j];
+			for (i = j - 1; i >= 0 && key < data[i]; i--)
+				data[i+1] = data[i];
+			data[i+1] = key;
+		}
+		return;
+	}
+	/* Defer this work to work queue if policy says so */
+	if (deferrable && depth <= DEFER_DEPTH) {
+		quick_sort_args *q = (quick_sort_args *)
+								malloc(sizeof (quick_sort_args));
+		assert(q != NULL);
+		q->data = data; q->n = n; q->depth = depth; q->wp = wp;
+		work_put(wp, (void *)q);
+		return;
+	}
+	/* Otherwise, partition data based on a median estimate */
+#define swap(i,j) {float t = data[i]; data[i] = data[j]; data[j] = t;}
+	i = 0;
+	j = n - 1;
+	for (;;) {
+		while (data[i] < data[j]) j--;
+		if (i >= j) break;
+		swap(i, j); i++;
+		while (data[i] < data[j]) i++;
+		if (i >= j) { i = j; break; }
+		swap(i, j); j--;
+	}
+	/* Median value is now at data[i] */
+	/* Partitioned so that data[0..i-1] <= median <= data[i+1..n-1] */
+	quick_sort_aux(data,       i,     depth+1, wp, TRUE);
+	quick_sort_aux(&data[i+1], n-i-1, depth+1, wp, TRUE);
+}
+/* Called from workpile controller with argument pointing to work. */
+void
+quick_sort_worker(void *a)
+{
+	quick_sort_args *q = (quick_sort_args *)a;
+	quick_sort_aux(q->data, q->n, q->depth, q->wp, FALSE);
+	free(q);
+}
+/* Main routine, called by client to do a sort. */
+void
+quick_sort(float *data, int n)
+{
+	if (quick_sort_workpile == NULL) {
+		int n_threads = 6;
+		quick_sort_workpile = work_init(2 << DEFER_DEPTH,
+			quick_sort_worker, n_threads);
+		assert(quick_sort_workpile != NULL);
+	}
+        
+	quick_sort_aux(data, n, 0, quick_sort_workpile, FALSE);
+        
+	/* Wait for all work to finish */
+	work_wait(quick_sort_workpile);
+        
+#ifdef QUICK_DEBUG
+        printf( "== Quicksort: done sorting\n" );
+#endif
+}
+
+
+main( argc, argv )
+int    argc;
+char **argv;
+{
+	float data[SORTSET];
+	int i; int debugging = 0;
+
+        if((argc > 1) && (0 != argv )) {
+            if( 1 == atoi( argv[1] ) )
+               wait_here = TRUE;
+        }
+
+	for(i = 0; i < SORTSET; i++)
+		data[SORTSET -1 -i] = drand48();
+                
+	for(i = 0; i < SORTSET; i++)
+		if (debugging)
+                   printf("data[%d] = %f\n", i, data[i]);
+
+	quick_sort(data, SORTSET);
+	for(i = 0; i < SORTSET; i++)
+		if (debugging)
+		printf("data[%d] = %f\n", i, data[i]);
+
+	return(0);
+}
+/* EndSourceFile */
diff --git a/gdb/testsuite/gdb.hp/quicksort.exp b/gdb/testsuite/gdb.hp/quicksort.exp
new file mode 100644
index 0000000..719bfdf
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/quicksort.exp
@@ -0,0 +1,809 @@
+# quicksort.exp -- Expect script to test gdb with quicksort.c
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+set testfile quicksort
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# To build the executable we need to link against the thread library.
+#
+#     cc -Ae -g -o quicksort -lpthread quicksort.c
+#
+#compile "${srcfile} -Ae -g -lpthread -o ${binfile}"
+
+if {$gcc_compiled == 0} {
+    set additional_flags "additional_flags=-Ae"
+} else {
+    set additional_flags ""
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}.o" object [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+set oldtimeout $timeout
+set timeout [expr "$timeout + 300"]
+set oldverbose $verbose
+#set verbose 40
+
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+#
+# NOTE: to pass a literal "$", "/" or "*" (etc.) to gdb_test, 
+#       remember that the pattern will be escaped once and 
+#       $-evaluated twice:
+#
+#          "\\\*" matches "\*"
+#          "\$"  matches "$"
+#
+proc fix_timeout {} {
+    gdb_test "p \$pc" ".*" ""
+}
+
+#=========================
+#
+# Simple sanity test first.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "tb 122" ".*Breakpoint.*" ""
+gdb_test "r" ".*122.*" ""
+gdb_test "thr 99" ".*Thread ID 99 not known.*" "Check too-big thread number"
+gdb_test "tb 145 thr 3" ".*Breakpoint.*" "set thread-specific bp 145"
+gdb_test "tb 146 thr 4" ".*Breakpoint.*" "set thread-specific bp 146"
+gdb_test "c" ".*Switched to thread.*145.*" "auto switch"
+gdb_test "c" ".*Switched to thread.*146.*" "auto switch 2"
+gdb_test "c" ".*Program exited normally.*" ""
+
+#=========================
+#
+# Test that you can't do a thread select after a program runs.
+#
+gdb_test "thread" ".*No stack.*" "No live thread after run"
+gdb_test "thr 2"  ".*No stack.*" "Can't set thread after run"
+
+#=========================
+#
+# Test thread command changes, look for frame level reset bug.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+gdb_test "b 122" ".*" ""
+gdb_test "r" ".*122.*" ""
+
+# Prep for frame level test--go up/info thread/check frame
+#
+gdb_test "up" ".*quick_sort.*" ""
+gdb_test "up" ".*main.*"       ""
+
+send_gdb "i th\n"
+gdb_expect {
+  -re ".*7 thread.* in .* from .* in .* from .* 6 thread.*$gdb_prompt $" {
+      fail "old thread command, says things twice"
+  }
+  -re ".*7 system thread.*6 system th.*5 sys.*4.*3.*2.*1.*work_init.*$gdb_prompt $" {
+      pass "info threads"
+  }
+  -re ".*$gdb_prompt $"  { fail "no info thread command" }
+  timeout { fail "timeout" }
+}
+
+# We should have been restored two frames up--check.
+#
+send_gdb "up\n"
+gdb_expect {
+    -re ".*Initial frame selected.*$gdb_prompt $" {
+        pass "Frame correctly reset after 'info threads'"
+    }
+    -re ".*quick_sort.*$gdb_prompt $" {
+        fail "Old gdb bug; should be fixed someday"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "real bug--FIX!"
+    }
+    timeout { fail "timeout" }
+}
+
+# Do it again, only just go to a middle frame, and use another thread.
+#
+gdb_test "thr 5" ".*" ""
+gdb_test "bt" ".* ___ksleep.*_lwp_cond_timedwait.*pthread_cond_wait.*worker.*__pthread_create_system.*" ""
+gdb_test "up" ".*1.*_lwp_cond_timedwait.*" ""
+gdb_test "up" ".*2.*pthread_cond_wait.*"   ""
+gdb_test "up" ".*3.*worker.*"              ""
+gdb_test "i th" ".*7.*6.*work_init.*"      ""
+gdb_test "f"  ".*3.*worker.*"              "Frame restored"
+gdb_test "p wp->max_pile" ".*= 128.*"      "can see vars in frame"
+
+# Thread command changes
+#
+gdb_test "thr"    ".*Current thread is 5.*"   "threads-no-num"
+gdb_test "thr 6"  ".*Switching to thread 6.*" "new switch"
+gdb_test "thr"    ".*Current thread is 6.*"   "check switch"
+#gdb_test "thr 6"  ".*Current thread is already 6.*" "dup, no switch"
+gdb_test "thr app all p x" ".*No symbol.*"    ""
+gdb_test "thr"    ".*Current thread is 6.*"   "restore current thread"
+
+#=========================
+#
+# Test new stepping
+#
+
+proc get_hit { } {
+    global hit2
+    global hit3
+    global hit4
+    global hit5
+    global hit6
+    global hit7
+    global gdb_prompt
+
+    send_gdb "cont\n"
+    gdb_expect {
+        -re ".*Breakpoint.*145.*$gdb_prompt $" {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 7.*$gdb_prompt $" {
+                    set hit7 [expr "$hit7 + 1"]
+                }
+                -re ".*is 6.*$gdb_prompt $" {
+                    set hit6 [expr "$hit6 + 1"]
+                }
+                -re ".*is 5.*$gdb_prompt $" {
+                    set hit5 [expr "$hit5 + 1"]
+                }
+                -re ".*is 4.*$gdb_prompt $" {
+                    set hit4 [expr "$hit4 + 1"]
+                }
+                -re ".*is 3.*$gdb_prompt $" {
+                    set hit3 [expr "$hit3 + 1"]
+                }
+                -re ".*is 2.*$gdb_prompt $" {
+                    set hit2 [expr "$hit2 + 1"]
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "can't see which thread"
+                }
+                timeout { fail "timeout" }
+            }
+        }
+        -re ".*$gdb_prompt $" {
+            fail "thread command"
+        }
+        timeout { fail "timeout" }
+    }
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+gdb_test "break 122" ".*" ""
+gdb_test "run"      ".*122.*" ""
+
+# Make sure we hit a bp on every thread.
+#
+# Try one, via thread-specific bps
+#
+gdb_test "break 145 thr 2" ".*" "set thread-specific bp thr 2"
+gdb_test "break 145 thr 3" ".*" "set thread-specific bp thr 3"
+gdb_test "break 145 thr 4" ".*" "set thread-specific bp thr 4"
+gdb_test "break 145 thr 5" ".*" "set thread-specific bp thr 5"
+gdb_test "break 145 thr 6" ".*" "set thread-specific bp thr 6"
+gdb_test "break 145 thr 7" ".*" "set thread-specific bp thr 7"
+
+set hit2 0
+set hit3 0
+set hit4 0
+set hit5 0
+set hit6 0
+set hit7 0
+
+get_hit
+get_hit
+get_hit
+get_hit
+get_hit
+get_hit
+
+if { [expr "$hit2 == 1"] 
+  && [expr "$hit3 == 1"]
+  && [expr "$hit4 == 1"]
+  && [expr "$hit5 == 1"]
+  && [expr "$hit6 == 1"]
+  && [expr "$hit7 == 1"] } {
+    pass "thread-specific bps 1"
+} else {
+    fail "thread-specific bps 1"
+}
+
+#====================
+#
+# Now use generic bps
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+gdb_test "b 122" ".*" ""
+gdb_test "r" ".*122.*" ""
+
+# Make sure we hit a bp on every thread.
+#
+# Try two, via non-thread-specific bp
+#
+gdb_test "b 145" ".*" "b 145"
+
+set hit2 0
+set hit3 0
+set hit4 0
+set hit5 0
+set hit6 0
+set hit7 0
+
+get_hit
+get_hit
+get_hit
+get_hit
+get_hit
+get_hit
+
+if { [expr "$hit2 == 1"] 
+  && [expr "$hit3 == 1"]
+  && [expr "$hit4 == 1"]
+  && [expr "$hit5 == 1"]
+  && [expr "$hit6 == 1"]
+  && [expr "$hit7 == 1"] } {
+    pass "thread-specific bps 2"
+} else {
+    fail "thread-specific bps 2"
+}
+
+#====================
+#
+# Complicated (original) test next.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if ![runto_main] then {
+   fail "Can't run to main"
+   return 0
+}
+
+# OK, we're at "main", there should be one thread.
+#
+gdb_test "info thread" ".*\\\* 1 system thread .*main.*" "initial thread"
+ 
+# Try to see the threads being created: set a breakpoint 
+# after the creation and go around the loop a few times.
+#
+gdb_test "break 109" "Breakpoint.*109.*" "set bpt"
+
+gdb_test "c" ".*New thread.*Breakpoint.*109.*" "first continue"
+fix_timeout
+
+# Make sure we don't wait (waiting is for attach test)
+#
+gdb_test "set wait_here = 0" ".*" ""
+
+send_gdb "info thr\n"
+gdb_expect {
+    -re ".*2 system th.*1 sy.*109.*$gdb_prompt $" { pass "saw thread create" }
+    -re ".*1 system thread.*87.*$gdb_prompt $"    { fail "didn't see thread create" }
+    -re ".*$gdb_prompt $"                         { fail "no info thread command" }
+    timeout { fail "timeout" }
+}
+
+gdb_test "c"      ".*New thread.*Breakpoint.*109.*" "continue"
+fix_timeout
+
+send_gdb "info thr\n"
+gdb_expect {
+    -re ".*3 system thread.*2 sys.*\\\* 1 system thread.*109.*$gdb_prompt $" { 
+        pass "saw thread create" }
+    -re ".*2 system thread.*1 sys.*109.*$gdb_prompt $" { 
+        fail "didn't see thread create" 
+    }
+    -re ".*1 system thread.*109.*$gdb_prompt $" {
+        fail "didn't see thread create" 
+    }
+    -re ".*$gdb_prompt $" {
+        fail "no info thread command" 
+    }
+    timeout { fail "timeout" }
+}
+
+fix_timeout
+gdb_test "clear" ".*Deleted breakpoint.*" ""
+
+# Now go on to the end of thread creation.
+#
+gdb_test "b 122"  ".*"     "set bpt 122"
+gdb_test "c"     ".*New thread.*New thread.*New thread.*122.*" ""
+gdb_test "p \$pc" ".*" ""
+gdb_test "clear" ".*Deleted breakpoint.*" ""
+
+send_gdb "info thr\n"
+gdb_expect {
+    -re ".*7 system thread.*6 sys.*5.*1 system thread.*122.*$gdb_prompt $" 
+        { pass "saw thread creates" }
+    -re ".*$gdb_prompt $"                           
+        { fail "no info thread command" }
+    timeout { fail "timeout" }
+}
+
+# Try a thread-specific breakpoint; we expect the other threads to
+# be waiting at this point.
+#
+gdb_test "thr 3"  ".*Switching to thread.*ksleep.*" "thread switch"
+gdb_test "i th"   ".*\\\* 3 system thread.*"        "show new current thread"
+
+gdb_test "up"     ".*lwp_cond_timedwait.*" ""
+gdb_test "up"     ".*pthread_cond_wait.*"  ""
+gdb_test "up"     ".*worker.*144.*"        ""
+
+gdb_test "b 145 th 3" ".*Breakpoint.*145.*" "set thread-specific bp"
+gdb_test "i b"    ".*breakpoint.*breakpoint.*145 thread 3.*" "show thread-specific bp"
+
+gdb_test "c"      ".*Breakpoint.*145.*145.*" "hit thread-specific bp"
+gdb_test "p \$pc" ".*" ""
+
+# Test thread apply command on thread specific data.
+#
+gdb_test "thre app all p \$pc" ".*Thread 7.*Thread 6.*Thread 5.*Thread 4.*Thread 3.*Thread 2.*Thread 1.*" "thread apply all"
+gdb_test "thr ap 1 3 5 p \$pc" ".*Thread 1.*Thread 3.*Thread 5.*" "thr app 1 3 5"
+
+# Switch again, and test that others continue on a "next"
+# This test _could_ fail due to timing issues, but that's
+# unlikely.
+#
+gdb_test "thr 7" ".*Switching to thread.*" ""
+
+# Make sure that "up" stops at __pthread_exit, or
+# __pthread_create, the pseudo-roots, and that we 
+# only see that pseudo-root once.
+#
+send_gdb "bt\n"
+gdb_expect {
+    -re ".*Error accessing memory address.*" { fail "bt" }
+    -re ".*pthread_create.*pthread_create.*" { fail "bt" }
+    -re ".*worker.*pthread_create.*"         { pass "bt" }
+    -re ".*pthread_exit.*"                   { pass "bt" }
+    timeout { fail "timeout on bt" }
+}
+
+gdb_test "up" ".*"           ""
+gdb_test "up" ".*"           ""
+gdb_test "up" ".*144.*"      "Up 3"
+gdb_test "up" ".*pthread_.*" "Up 4"
+gdb_test "up" ".*Initial frame selected; you cannot go up.*" "catch end of thread stack"
+
+#=====================
+#
+# Things get iffy here; when we step, sometimes the step
+# completes, sometimes it doesn't.  When it doesn't, we
+# hit a bp somewhere else and the step never completes
+# (wait_for_inferior just evaporates it). 
+#
+# I think the right answer is that any failures here
+# should stick around to trigger later fixing.
+#
+#  Here's the plan: 
+#
+#  Bps at 148 (5) and 154 (6) on thread 7 (two bps so we 
+#     see the difference between going around the loop and
+#     reporting the same bp hit twice).
+#
+#  Bp at 144 on thread 3.
+#
+#  Step out of a library routine.
+#
+# Either the step will finish or a bp will hit.  Try to
+# handle all the cases.
+#
+gdb_test "b 148 thr 7" ".*Breakpoint.*148.*" ""
+gdb_test "b 154 thr 7" ".*Breakpoint.*154.*" "set bpt 2"
+
+set hit_154_bp 0
+set hit_148_bp 0
+set hit_145_bp 0
+set step_completed 0
+
+# Expect zero hits
+#
+gdb_test "i b" ".*" ""
+
+send_gdb "n\n"
+gdb_expect {
+    -re ".*Single stepping.*_lwp_cond_timedwait.*$gdb_prompt $" {
+        send_gdb "thr\n"
+        gdb_expect {
+            -re ".*is 7.*$gdb_prompt $" {
+                set step_completed 1
+                pass "completed step in library code"
+            }
+            -re ".*$gdb_prompt $" {
+                fail "completed step in library code, but in wrong thread"
+            }
+            timeout { fail "timeout" }
+        }
+    }
+    -re ".*Single stepping.*Switched to thread 3.*Breakpoint.*$gdb_prompt $" {
+        pass "step cancelled; hit bp due to thread parallelism"
+        set hit_145_bp 1
+    }
+    -re ".*Single stepping.*Switched to thread 7.*Breakpoint.*148.*$gdb_prompt $" {
+        pass "step cancelled; hit bp due to thread parallelism"
+        set hit_148_bp 1
+    }
+    -re ".*Single stepping.*Switched to thread 7.*Breakpoint.*154.*$gdb_prompt $" {
+        pass "step cancelled; hit bp due to thread parallelism"
+        set hit_154_bp 1
+    }
+    -re ".*$gdb_prompt $" {
+        send_gdb "thr\n"
+        gdb_expect {
+            -re ".*is 7.*$gdb_prompt $" {
+                fail "No event?"
+            }
+            -re ".*$gdb_prompt $" {
+                fail "No event"
+            }
+            timeout { fail "timeout" }
+        }
+    }
+    timeout { fail "timeout" }
+}
+
+# Sometimes used to get SIGTRAP here; that should be fixed
+#
+
+# Expect appropriate hits of bpt; too much work to parse
+# result and check...
+#
+gdb_test "i b" ".*" ""
+
+send_gdb "c\n"
+gdb_expect {
+    -re ".*SIGTRAP.*$gdb_prompt $" {
+        fail "got SIGTRAP"
+    }
+    -re ".*Switched to thread 7.*Breakpoint.*154.*$gdb_prompt $" {
+        if { $hit_154_bp == 1 } {
+            fail "re-hit old bp"
+        } else {
+            pass "continue; hit parallel event after continue"
+        }
+        set hit_154_bp 1
+    }
+    -re ".*Switched to thread 7.*Breakpoint.*148.*$gdb_prompt $" {
+        if { $hit_148_bp == 1 } {
+            fail "re-hit old bp"
+        } else {
+            pass "continue; hit parallel event after continue"
+        }
+        set hit_148_bp 1
+    }
+    -re ".*Breakpoint.*154.*$gdb_prompt $" {
+        if { $hit_154_bp == 1 } {
+            fail "re-hit old bp"
+        } else {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 7.*$gdb_prompt $" {
+                    pass "continue; hit parallel event after continue"
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "hit bp in wrong thread"
+                }
+                timeout { fail "timeout" }
+            }
+        }
+        set hit_154_bp 1
+    }
+    -re ".*Breakpoint.*148.*$gdb_prompt $" {
+        if { $hit_148_bp == 1 } {
+            fail "re-hit old bp"
+        } else {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 7.*$gdb_prompt $" {
+                    pass "continue; hit parallel event after continue"
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "hit bp in wrong thread"
+                }
+                timeout { fail "timeout" }
+            }
+        }
+        set hit_148_bp 1
+    }
+    -re ".*Breakpoint.*145.*$gdb_prompt $" {
+        if { $hit_145_bp == 1 } {
+            fail "re-hit old bp"
+        } else {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 3.*$gdb_prompt $" {
+                    pass "continue; hit parallel event after continue"
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "hit bp in wrong thread"
+                }
+                timeout { fail "timeout" }
+            }
+        }
+        set hit_145_bp 1
+    }
+    -re ".*_lwp_cond_timedwait.*$gdb_prompt $" {
+        pass "continue; hit step completion after continue"
+    }
+    -re ".*Program exited normally.*" {
+        fail "Program ended? HOW?"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Unexpected event"
+    }
+    timeout { fail "timeout" }
+}
+
+# There are a number of places we _could_ be now;
+# this is the price of really running in parallel.
+#
+send_gdb "n\n"
+gdb_expect {
+    -re ".*Switched to thread 7.*pthread_cond_wait.*$gdb_prompt $" {
+        if { $step_completed } {
+            fail "step already completed"
+        } else {
+            pass "finish step"
+        }
+    }
+    -re ".*pthread_cond_wait.*$gdb_prompt $" {
+        #
+        # Unlikely, but we might finish the range step from inside
+        # ksleep, before anything else.
+        #
+        if { $step_completed } {
+            fail "step already completed"
+        } else {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 7.*$gdb_prompt $" {
+                    pass "finish step"
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "step in wrong thread"
+                }
+                timeout { fail "timeout" }
+            }
+        }
+    }
+    -re ".*Switched to thread.*Breakpoint.*145.*$gdb_prompt $" {
+        pass "auto-switch thread" 
+    }
+    -re ".*Breakpoint.*145.*$gdb_prompt $" {
+        pass "auto-switch not needed, ok" 
+    }
+    -re ".*140.*while.*n_pile.*$gdb_prompt $" {
+        #
+        # This is just going around the loop from the 154 bp.
+        #
+        send_gdb "thr\n"
+        gdb_expect {
+            -re ".*is 7.*$gdb_prompt $" {
+                pass "finish step"
+            }
+            -re ".*$gdb_prompt $" {
+                fail "step in wrong thread"
+            }
+            timeout { fail "timeout" }
+        }
+    }
+    -re ".*149.*ptr = wp.*pile.*$gdb_prompt $" {
+        #
+        # This is just going around the loop from the 148 bp.
+        #
+        if { $hit_154_bp } {
+            send_gdb "thr\n"
+            gdb_expect {
+                -re ".*is 7.*$gdb_prompt $" {
+                    pass "finish step"
+                }
+                -re ".*$gdb_prompt $" {
+                    fail "step in wrong thread"
+                } 
+                timeout { fail "timeout" }
+            }
+        } else {
+            pass "step from 149 but didn't hit it first"
+        }
+    }
+    -re ".*Breakpoint 5.*154.*$gdb_prompt $" {
+        gdb_test "i b" ".*" ""
+        if { $hit_154_bp } {
+            fail "hit bp again?"
+        } else {
+            pass "hit bp"
+        }
+    }
+    -re ".*Breakpoint 5.*148.*$gdb_prompt $" {
+        gdb_test "i b" ".*" ""
+        if { $hit_148_bp } {
+            fail "hit bp again?"
+        } else {
+            pass "hit bp"
+        }
+    }
+    -re ".*$gdb_prompt $" {
+        fail "no step finished"
+    }
+    timeout { fail "timeout on 'next'" }
+}
+
+# Let's get into some kind of known state again.
+#
+gdb_test "thr 7" ".*" ""
+gdb_test "info thread" ".*" ""
+#gdb_test "i b" ".*" ""
+
+# Leave breakpoint "154 thr 7" as only live bp.
+# 
+gdb_test "d 1"   ".*" "del main bp"
+gdb_test "d 4"   ".*" "thread-specific bpt delete"
+gdb_test "d 5"   ".*" "other bp delete"
+send_gdb "i b\n"
+gdb_expect {
+    -re ".*breakpoint.*breakpoint.*$gdb_prompt $" {
+        fail "more than one bp left"
+    }
+    -re ".*breakpoint.*154.*thread.*7.*$gdb_prompt $" {
+        pass "Only one bp left"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Wrong or no bp left"
+    }
+    timeout { fail "timeout on info b" }
+}
+
+send_gdb "c\n" 
+gdb_expect {
+    -re ".*SIGTRAP.*Switched to thread.*$gdb_prompt $" {
+        fail "SIGTRAP error; lost thread-specific bpt"
+    }
+    -re ".*SIGTRAP.*Switched to thread.*154.*$gdb_prompt $" {
+        fail "SIGTRAP, but hit right thread-specific bpt"
+    }
+    -re ".*Switched to thread.*Breakpoint.*154.*$gdb_prompt $" {
+        pass "auto-switch back"
+    }
+    -re ".*Breakpoint.*154.*$gdb_prompt $" {
+        pass "step to bp"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "auto-switch back" 
+    }
+    -re ".*Program exited normally.*$gdb_prompt $" {
+        fail "step lost"
+    }
+    timeout {
+        fail "timeout"
+    }
+}
+fix_timeout
+
+gdb_test "cle"   ".*Deleted breakpoint.*" "delete last breakpoint"
+
+# Sometimes get SIGTRAP here.  Continue sometimes gets another...
+#
+send_gdb "c\n"
+gdb_expect {
+    -re ".*SIGTRAP.*154.*154.*$gdb_prompt $" {
+        fail "SIGTRAP on deleted bp 154 "
+        send_gdb "c\n" 
+        gdb_expect {
+            -re ".*$gdb_prompt $" { pass "fixup"}
+            timeout { fail "fixup" }
+        }
+   }
+    -re ".*SIGTRAP.*144.*145.*$gdb_prompt $" {
+        fail "SIGTRAP on deleted bp 145 "
+        send_gdb "c\n"
+        gdb_expect {
+            -re ".*$gdb_prompt $" { pass "fixup"}
+            timeout { fail "fixup" }
+        }
+    }
+    -re ".*SIGTRAP.*148.*148.*$gdb_prompt $" {
+        fail "SIGTRAP on deleted bp 148 "
+        send_gdb "c\n"
+        gdb_expect {
+            -re ".*$gdb_prompt $" { pass "fixup"}
+            timeout { fail "fixup" }
+        }
+    }
+    -re ".*SIGTRAP.*$gdb_prompt $" {
+        fail "unknown SIGTRAP"
+        send_gdb "c\n"
+        gdb_expect {
+            -re ".*$gdb_prompt $" { pass "fixup"}
+            timeout { fail "fixup" }
+        }
+    }
+    -re ".*Program exited.*$gdb_prompt $" {
+        pass "run to end"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "run to end"
+        send_gdb "c\n"
+        gdb_expect {
+            -re ".*$gdb_prompt $" { pass "fixup"}
+            timeout { fail "fixup" }
+        }
+    }
+    timeout { fail "timeout" }
+}
+
+gdb_test "p \$pc" ".*No registers.*" "program done"
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
+
diff --git a/gdb/testsuite/gdb.hp/reg-test.exp b/gdb/testsuite/gdb.hp/reg-test.exp
new file mode 100644
index 0000000..4bdc306
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/reg-test.exp
@@ -0,0 +1,190 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Tests of wide register displays for GDB on HPPA 2.0 machines
+
+# use this to debug:
+#log_user 1
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+if ![istarget "hppa*-*-*"] {
+    verbose "Wide register test ignored for non-hppa targets."
+    return
+}
+
+set testfile "reg_test"
+set srcfile ${testfile}.s
+set binfile ${objdir}/${subdir}/${testfile}
+
+# To build a pa 2.0 executable
+#
+#     as -o reg_test reg_test.s
+# or 
+#     cc -g -o reg_test reg_test.s
+#
+# The +DA2.0N flag doesn't seem to be needed.
+#
+# Don't reject if there are warnings, as we expect this warning:
+#
+#    (Warning) At least one PA 2.0 object file (pa2.0_test2.o) was detected.
+#    The linked output may not run on a PA 1.x system.
+#
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# test machine--there's no 2.0n architecture, so we have
+# to try to run the app.
+#
+send_gdb "break main\n"
+    gdb_expect {
+        -re "Breakpoint.*$gdb_prompt $" {
+            pass "initial set-up"
+        }
+        -re ".*$gdb_prompt $" {
+            fail "initial set-up"
+        }
+        timeout {
+            fail "initial set-up (timeout)"
+        }
+    }
+
+send_gdb "run\n"
+    gdb_expect {
+        -re ".*Executable file incompatible with hardware.*$gdb_prompt $" {
+            # Not hppa2.0 machine
+            #
+            return 0
+        }
+        -re "Cannot exec.*$gdb_prompt $" {
+            # Not hppa2.0 machine
+            #
+            return 0
+        }
+        -re ".*Starting program:.*$gdb_prompt $" {
+            pass "Ready to start test"
+        }
+        timeout {
+            fail "initial set-up, part 2 (timeout)"
+            return 0
+        }
+    }
+
+# Let the program set known values.  This secretly deletes
+# the breakpoint at main and re-runs to mainend.
+#
+runto mainend
+
+# Look for known values
+#
+gdb_test "info reg r1"  "r1 1"
+gdb_test "info reg r4"  "r4 2"
+gdb_test "info reg r5"  "r5 4"
+gdb_test "info reg r6"  "r6 8"
+gdb_test "info reg r7"  "r7 10"
+gdb_test "info reg r8"  "r8 20"
+gdb_test "info reg r9"  "r9 40"
+gdb_test "info reg r10" "r10 80"
+gdb_test "info reg r11" "r11 100"
+gdb_test "info reg r12" "r12 200"
+gdb_test "info reg r13" "r13 400"
+gdb_test "info reg r14" "r14 800"
+gdb_test "info reg r15" "r15 1000"
+gdb_test "info reg r16" "r16 2000"
+
+# Two odd variants that GDB supports are:
+#   "1" means "r1", and
+#   "$1" means "r1"
+#
+gdb_test "info reg 1 4" "r1 1.*r4 2"
+gdb_test "info reg \$1" "r1 1"
+
+# Verify that GDB responds gracefully to a register ID number that
+# is out of range.
+#
+gdb_test "info reg 999" "999: invalid register"
+
+# Make sure the floating point status and error registers
+# don't show up as floating point numbers!
+#
+gdb_test "info reg fpsr" ".*fpsr 0.*" "fpsr"
+gdb_test "info reg fpe1" ".*fpe1 0.*" "fpe1"
+gdb_test "info reg fpe2" ".*fpe2 0.*" "fpe2"
+gdb_test "info reg fpe3" ".*fpe3 0.*" "fpe3"
+gdb_test "info reg fpe4" ".*fpe4 0.*" "fpe4"
+gdb_test "info reg fpe5" ".*fpe5 0.*" "fpe5"
+gdb_test "info reg fpe6" ".*fpe6 0.*" "fpe6"
+gdb_test "info reg fpe7" ".*fpe7 0.*" "fpe7"
+
+gdb_test "info reg fr4"  ".*fr4.*(double precision).* 1"
+gdb_test "info reg fr5"  ".*fr5.*(double precision).* 2"
+gdb_test "info reg fr6"  ".*fr6.*(double precision).* 2"
+gdb_test "info reg fr7"  ".*fr7.*(double precision).* 4"
+gdb_test "info reg fr8"  ".*fr8.*(double precision).* 8"
+gdb_test "info reg fr9"  ".*fr9.*(double precision).* 32"
+gdb_test "info reg fr10" ".*fr10.*(double precision).* 256"
+
+gdb_test "info reg r19" "r19 deadbeefbadcadee"
+
+# Need to add test of use of $<register-name>
+#
+# Q: How do you say a literal "$" in expect?
+# A: You say "\$".   A literal "\" is "\\".
+#
+# Please note that this test will fail as long as we are running
+# in 32-bit mode: it will produce "$1 = 0xbadcadee".  To fix it
+# would require building a real 64-bit gdb (expression evaluation, 
+# in particular).
+#
+send_gdb "p/x \$r19\n"
+    gdb_expect {
+        -re ".*= 0xdeadbeefbadcadee.*$gdb_prompt $" {
+            pass "64-bit works"
+        }
+        -re ".*= 0xbadcadee.*$gdb_prompt $" {
+            pass "32-bit extract when using PRINT; expected but not good"
+        }
+        -re ".*$gdb_prompt $" {
+            fail "didn't print any part of right value"
+        }
+        timeout {
+            fail "timeout on print"
+        }
+    }
+
+# Need to add tests of setting wide regs too.  E.g.
+#
+# set $r4 = 0x1234567890123456
+# p/x $r4
+#
+
+# done
+#
+gdb_exit
+remote_exec build "rm -f ${binfile}"
+return 0
diff --git a/gdb/testsuite/gdb.hp/reg-test.s b/gdb/testsuite/gdb.hp/reg-test.s
new file mode 100644
index 0000000..39bb5d8
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/reg-test.s
@@ -0,0 +1,96 @@
+;  assemble as "as -o reg_test.exe reg_test.s"
+; or
+;  cc -g -o +DA2.0N
+;
+; PA-RISC 2.0 register contents test.
+;
+        .level 2.0
+
+        .code
+        .export main,ENTRY
+        .export mainend,CODE
+        .export lab1,CODE
+        .space $TEXT$
+        .subspa $CODE$
+
+main
+        .proc
+        .callinfo NO_CALLS,FRAME=0
+        .entry
+
+        ;; Test we have right register numbers
+        ;;
+        ADD             %r0,%r0,%r1             ;    0 
+        LDI             1,%r1                   ;    1
+        ;;
+        ;; Don't put anything into r2 or r3--they are special registers.
+        ;;
+        ADD             %r1,%r1,%r4             ;    2
+        ADD             %r4,%r4,%r5             ;    4
+        ADD             %r5,%r5,%r6             ;    8
+        ADD             %r6,%r6,%r7             ;   16
+        ADD             %r7,%r7,%r8             ;   32
+        ADD             %r8,%r8,%r9             ;   64
+        ADD             %r9,%r9,%r10            ;  128
+        ADD             %r10,%r10,%r11          ;  256
+        ADD             %r11,%r11,%r12          ;  512
+        ADD             %r12,%r12,%r13          ; 1024
+        ADD             %r13,%r13,%r14          ; 2048
+        ADD             %r14,%r14,%r15          ; 4096
+        ADD             %r15,%r15,%r16          ; 9192
+
+        ;; Test high bits, to be sure we show them.
+        ;;
+        LDI             0xde,%r19               ; "de"
+        DEPD,Z          %r19,55,56,%r19         ; "de00"
+        LDI             0xad,%r18               ; "ad"
+        ADD             %r18,%r19,%r19          ; "dead"
+        DEPD,Z          %r19,55,56,%r19         ; "dead00"
+        LDI             0xbe,%r18               ; "be"
+        ADD             %r18,%r19,%r19          ; "deadbe"
+        DEPD,Z          %r19,55,56,%r19         ; "deadbe00"
+        LDI             0xef,%r18               ; "ef"
+        ADD             %r18,%r19,%r19          ; "deadbeef"
+        ;
+        DEPD,Z          %r19,55,56,%r19         ; "deadbeef00"
+        LDI             0xba,%r18               ; "ba"
+        ADD             %r18,%r19,%r19          ; "deadbeefba"
+        DEPD,Z          %r19,55,56,%r19         ; "deadbeefba00"
+        LDI             0xdc,%r18               ; "dc"
+        ADD             %r18,%r19,%r19          ; "deadbeefbadc"
+        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadc00"
+        LDI             0xad,%r18               ; "ad"
+        ADD             %r18,%r19,%r19          ; "deadbeefbadcad"
+        DEPD,Z          %r19,55,56,%r19         ; "deadbeefbadcad00"
+        LDI             0xee,%r18               ; "ee"
+        ADD             %r18,%r19,%r19          ; "deadbeefbadcadee"
+        
+lab1    ;; Test floating point registers
+        ;;
+        LDIL            LR'one,%r22             ;
+        FLDD            RR'one(%r22),%fr4       ;   1.0
+        FLDD            RR'one+8(%r22),%fr5     ;   2.0
+        FLDD            RR'one+8(%r22),%fr6     ;   2.0
+        FMPY,DBL        %fr5,%fr6,%fr7          ;   4.0
+        FMPY,DBL        %fr6,%fr7,%fr8          ;   8.0
+        FMPY,DBL        %fr7,%fr8,%fr9          ;  32.0
+        FMPY,DBL        %fr8,%fr9,%fr10         ; 256.0
+        
+        ;; The NOP prevents anything from end.o or crt0.o from
+        ;; being appended immediately after "mainend".  If that
+        ;; happens, then we may have other labels that have the
+        ;; same address as "mainend", and thus the debugger
+        ;; may symbolize this PC to something other than "mainend".
+mainend                
+        NOP
+        .exit
+        .procend
+
+        .space $TEXT$
+        .subspa $CODE$
+        .subspa $LIT$        ;; <don't use> ,QUAD=0,ALIGN=8,ACCESS=0x2c,SORT=16
+one
+        .align 8
+        .stringz        "?\xF0\x00\x00\x00\x00\x00\x00@\x00\x00\x00\x00\x00\x00"
+        .end
+
diff --git a/gdb/testsuite/gdb.hp/run-hp.c b/gdb/testsuite/gdb.hp/run-hp.c
new file mode 100644
index 0000000..91da1e0
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/run-hp.c
@@ -0,0 +1,70 @@
+/*
+ *	This simple classical example of recursion is useful for
+ *	testing stack backtraces and such.
+ */
+
+#ifdef vxworks
+
+#  include <stdio.h>
+
+/* VxWorks does not supply atoi.  */
+static int
+atoi (z)
+     char *z;
+{
+  int i = 0;
+
+  while (*z >= '0' && *z <= '9')
+    i = i * 10 + (*z++ - '0');
+  return i;
+}
+
+/* I don't know of any way to pass an array to VxWorks.  This function
+   can be called directly from gdb.  */
+
+vxmain (arg)
+char *arg;
+{
+  char *argv[2];
+
+  argv[0] = "";
+  argv[1] = arg;
+  main (2, argv, (char **) 0);
+}
+
+#else /* ! vxworks */
+#  include <stdio.h>
+#endif /* ! vxworks */
+
+main (argc, argv, envp)
+int argc;
+char *argv[], **envp;
+{
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+#ifdef FAKEARGV
+    printf ("%d\n", factorial (1));
+#else    
+    if (argc != 2) {
+	printf ("usage:  factorial <number>\n");
+	return 1;
+    } else {
+	printf ("%d\n", factorial (atoi (argv[1])));
+    }
+#endif
+    return 0;
+}
+
+int factorial (value)
+int value;
+{
+    int  local_var;
+
+    if (value > 1) {
+	value *= factorial (value - 1);
+    }
+    local_var = value;
+    return (value);
+}
diff --git a/gdb/testsuite/gdb.hp/sized-enum.c b/gdb/testsuite/gdb.hp/sized-enum.c
new file mode 100644
index 0000000..a6d5788
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/sized-enum.c
@@ -0,0 +1,43 @@
+
+enum Normal {
+  red,
+  blue,
+  green
+};
+
+short enum Small {
+  pink,
+  cyan,
+  grey
+};
+
+char enum Tiny {
+  orange,
+  yellow,
+  brown
+};
+
+
+main()
+{
+  enum Normal normal[3];
+  short enum Small small[3];
+  char enum Tiny tiny[3];
+  int i;
+
+  for (i=0; i < 3; i++)
+    {
+      normal[i] = (enum Normal) i;
+      small[i] = (short enum Small) i;
+      tiny[i] = (char enum Tiny) i;
+    }
+  normal[0] = 0; /* place to hang a breakpoint */ 
+}
+
+    
+  
+
+  
+
+
+  
diff --git a/gdb/testsuite/gdb.hp/sized-enum.exp b/gdb/testsuite/gdb.hp/sized-enum.exp
new file mode 100644
index 0000000..191050a
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/sized-enum.exp
@@ -0,0 +1,162 @@
+# Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# GDB tests for sized enumerations
+
+# This is aimed at HP-UX systems.  The HP C compiler
+# allows specifying "char" or "short" for an enum, to
+# indicate that it is 1 or 2 bytes long.
+
+# This file was written by Satish Pai <pai@apollo.hp.com>
+# 1997-09-24
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "sized-enum"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+#
+# set it up at a breakpoint so we can play with the variable values
+#
+
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+# set a breakpoint and go there
+send_gdb "break 34\n"   
+gdb_expect {   
+   -re "Breakpoint \[0-9\] at.*$gdb_prompt $" { pass "set break 34" }
+   -re "$gdb_prompt $"                     { fail "set break 34" }
+   timeout                             { fail "(timeout) set break 34" }
+}
+send_gdb "continue\n"   
+gdb_expect {   
+   -re "Continuing\\.\r\n\r\nBreakpoint \[0-9\]*, main....at.*sized-enum\\.c:34\r\n34.*\r\n$gdb_prompt $" { pass "continue" }
+   -re "$gdb_prompt $"                     { fail "continue" }
+   timeout                             { fail "(timeout) continue" }
+}
+
+# print stuff
+send_gdb "print normal\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{red, blue, green\\}.*$gdb_prompt $" { pass "print normal" }
+   -re "$gdb_prompt $"                     { fail "print normal" }
+   timeout                             { fail "(timeout) print normal" }
+}
+send_gdb "print small\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{pink, cyan, grey\\}.*$gdb_prompt $" { pass "print small" }
+   -re "$gdb_prompt $"                     { fail "print small" }
+   timeout                             { fail "(timeout) print small" }
+}
+send_gdb "print tiny\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{orange, yellow, brown\\}.*$gdb_prompt $" { pass "print tiny" }
+   -re "$gdb_prompt $"                     { fail "print tiny" }
+   timeout                             { fail "(timeout) print tiny" }
+}
+
+# print type sizes
+send_gdb "print sizeof (Normal)\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 4.*$gdb_prompt $" { pass "print sizeof (Normal)" }
+   -re "$gdb_prompt $"                     { fail "print sizeof (Normal)" }
+   timeout                             { fail "(timeout) print sizeof (Normal)" }
+}
+send_gdb "print sizeof (Small)\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 2.*$gdb_prompt $" { pass "print sizeof (Small)" }
+   -re "$gdb_prompt $"                     { fail "print sizeof (Small)" }
+   timeout                             { fail "(timeout) print sizeof (Small)" }
+}
+send_gdb "print sizeof (Tiny)\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print sizeof (Tiny)" }
+   -re "$gdb_prompt $"                     { fail "print sizeof (Tiny)" }
+   timeout                             { fail "(timeout) print sizeof (Tiny)" }
+}
+
+# print types
+send_gdb "ptype normal\n"   
+gdb_expect {   
+   -re "type = enum Normal \\{red, blue, green\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype normal" }
+   -re "$gdb_prompt $"                     { fail "ptype normal" }
+   timeout                             { fail "(timeout) ptype normal" }
+}
+send_gdb "ptype small\n"   
+gdb_expect {   
+   -re "type = short enum Small \\{pink, cyan, grey\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype small" }
+   -re "$gdb_prompt $"                     { fail "ptype small" }
+   timeout                             { fail "(timeout) ptype small" }
+}
+send_gdb "ptype tiny\n"   
+gdb_expect {   
+   -re "type = char enum Tiny \\{orange, yellow, brown\\} \\\[3\\\].*$gdb_prompt $" { pass "ptype tiny" }
+   -re "$gdb_prompt $"                     { fail "ptype tiny" }
+   timeout                             { fail "(timeout) ptype tiny" }
+}
+
+# convert to int
+send_gdb "print (int) blue\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) blue" }
+   -re "$gdb_prompt $"                     { fail "print (int) blue" }
+   timeout                             { fail "(timeout) print (int) blue" }
+}
+send_gdb "print (int) cyan\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) cyan" }
+   -re "$gdb_prompt $"                     { fail "print (int) cyan" }
+   timeout                             { fail "(timeout) print (int) cyan" }
+}
+send_gdb "print (int) yellow\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = 1.*$gdb_prompt $" { pass "print (int) yellow" }
+   -re "$gdb_prompt $"                     { fail "print (int) yellow" }
+   timeout                             { fail "(timeout) print (int) yellow" }
+}
+
+
+
diff --git a/gdb/testsuite/gdb.hp/so-thresh.exp b/gdb/testsuite/gdb.hp/so-thresh.exp
new file mode 100644
index 0000000..1977e92
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/so-thresh.exp
@@ -0,0 +1,362 @@
+#   Copyright (C) 1997, 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+	strace $tracelevel
+	}
+
+set prms_id 0
+set bug_id 0
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+set testfile "so-thresh"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# This testcase is automatically generated, via the
+# gen-so-thresh program, which also should
+# live in this same directory.
+#
+# The generator produces:
+#   - so-thresh.c
+#   - 3 .c files named libXX-so-thresh.c
+#   - a makefile named so-thresh.mk with a
+#     target named "so-thresh" that will compile
+#     and link the testcase
+#
+# Making with so-thresh.mk produces:
+#   - so-thresh
+#   - 3 shared libraries that are linked against, named
+#     libXX-so-thresh.sl
+#
+# We build gen-so-thresh, run it, and then make with
+# the makefile it produces.
+#
+set genfile gen_${testfile}
+set gen_srcfile ${genfile}.c
+set gen_binfile ${genfile}
+set gen_makefile ${testfile}.mk
+
+# This testcase is relatively large, and therefore can take awhile to
+# load.  We'd best set the timeout to something suitable, or we may
+# seem to fail...
+#
+set timeout 60
+
+# It's easiest to build and run the testcase in this directory.  (Linking
+# against shlibs puts relative paths to them in the a.out, so it's best
+# if we remain in this directory for the entire test run.)
+#
+#cd gdb.base
+
+# Ensure that the testcase is built.  This may cause the generator to
+# be built & run.
+#
+# Warning!  The final link of this testcase is not for the
+# faint-hearted nor under-disked machine!
+#
+# ??rehrauer: I tried for a very long time to get make invoked
+# directly here, rather than invoking a script to do it.  I
+# finally gave up in frustration; I'm not sure why it wouldn't
+# work that way, but this method DOES work, albeit clumsily.
+#
+
+send_user "Making with ${testfile}.mk ...\n"
+# remote_exec build "sh -c \\\"cd ${objdir}/${subdir}\\; make -v -f ${srcdir}/${subdir}/${testfile}.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir}\\\""
+remote_exec build "sh -c \\\"cd ${objdir}/${subdir}\\; make -v -f ${srcdir}/${subdir}/${testfile}.mk clean require_shlibs all SRCDIR=${srcdir}/${subdir} OBJDIR=${objdir}/${subdir}\\\""
+
+# Only HP-UX (and any other platforms using SOM shared libraries, I
+# guess) interprets the auto-solib-add variable as a threshhold,
+# rather than a boolean that strictly enables or disables automatic
+# loading of shlib symbol tables.
+#
+# On HP-UX, it is the size threshhold (in megabytes) at which to
+# stop auto loading of symbol tables.
+#
+if ![istarget "hppa*-hp-hpux*"] then {
+   setup_xfail "*-*-*"
+}
+
+# Start with a fresh gdb
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+# This is a test of gdb's ability on HP-UX to stop automatically
+# loading symbols of shared libraries, when the total size of the
+# debugger's symbol table reaches a specified threshhold.
+#
+
+# On HP-UX, the help text for auto-solib-add mentions that it
+# serves as a threshhold.
+#
+send_gdb "help set auto-solib-add\n"
+gdb_expect {
+  -re "Set autoloading size threshold .in megabytes. of shared library symbols.*
+If nonzero, symbols from all shared object libraries will be loaded.*
+automatically when the inferior begins execution or when the dynamic linker.*
+informs gdb that a new library has been loaded, until the symbol table.*
+of the program and libraries exceeds this threshold.*
+Otherwise, symbols must be loaded manually, using `sharedlibrary'.*$gdb_prompt $"\
+          {pass "help set auto-solib-add"}
+  -re "$gdb_prompt $"\
+          {fail "help set auto-solib-add"}
+  timeout {fail "(timeout) help set auto-solib-add"}
+}
+
+# On HP-UX, the threshhold is by default set to 50, which means
+# 50 megabytes.
+#
+send_gdb "show auto-solib-add\n"
+gdb_expect {
+  -re "Autoloading size threshold .in megabytes. of shared library symbols is 100.*$gdb_prompt $"\
+          {pass "show auto-solib-add (default is 100)"}
+  -re "$gdb_prompt $"\
+          {fail "show auto-solib-add (default is 100)"}
+  timeout {fail "(timeout) show auto-solib-add (default is 100)"}
+}
+
+send_gdb "set auto-solib-add 1\n"
+gdb_expect {
+   -re ".*$gdb_prompt $"
+            {pass "set auto-solib-add to 1"}
+   -re ".*$gdb_prompt $"
+            {fail "set auto-solib-add to 1"}
+   timeout {fail "(timeout) set auto-solib-add to 1"}
+}
+
+
+# We have manually verified that our testcase exceeds 1 Mbytes
+# of heap space in GDB to hold the symbols for the main program
+# and all associated linked-against libraries.  Thus, when we
+# run to the program's main, and therefore notice all the linked-
+# against shlibs, we expect to hit the threshhold.
+#
+# (Note that we're not using the expect [runto main] function here,
+# 'cause we want to match on output from the run command.
+#
+send_gdb "break main\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break at main"}
+  -re "$gdb_prompt $"\
+          {fail "set break at main"}
+  timeout {fail "(timeout) set break at main"}
+}
+
+send_gdb "run\n"
+gdb_expect {
+  -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+          {pass "run to main hit auto-solib-add threshold"}
+  -re "$gdb_prompt $"\
+          {fail "run to main hit auto-solib-add threshold"}
+  timeout {fail "(timeout) run to main hit auto-solib-add threshold"}
+}
+
+# Verify that "info share" mentions something about libraries whose
+# symbols weren't loaded.
+#
+# We'll assume that at least the last two shlib's symbols weren't
+# loaded.  As a side-effect of matching this pattern, the text start
+# address of the last one is captured in expect_out(1,string).
+# (we'll need it for the 'add-symbol-file' command in a nonce...)
+#
+send_gdb "info sharedlibrary\n"
+gdb_expect {
+  -re ".*lib01_$testfile.sl .*symbols not loaded.*0x\[0-9\]*  (0x\[0-9a-fA-F\]*).*$gdb_prompt $"\
+          { send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
+            gdb_expect {
+              -re "add symbol table.*y or n.*$"\
+                      {send_gdb "y\n"
+                       gdb_expect {
+                         -re "$gdb_prompt $" {pass "add-symbol-file and info sharedlib"}
+                         timeout {fail "(timeout) add-symbol-file and info sharedlib"}
+                       }}
+              -re "$gdb_prompt $"\
+                      {fail "add-symbol-file and info sharedlib"}
+              timeout {fail "(timeout) add-symbol-file and info sharedlib"}
+            }
+          }
+  -re "$gdb_prompt $"\
+          {fail "info sharedlibrary shows shlibs with unloaded symbols"}
+  timeout {fail "(timeout) info sharedlibrary shows shlibs with unloaded symbols"}
+}
+
+# Verify that we can manually load the symbol table of a library
+# whose symbols weren't loaded.  (We'll pick the last one.)
+#
+
+# I moved this test inside the one above, because the expect_out array is not ok if the
+# previous test has failed, and expect would error out (elz)
+#
+#send_gdb "add-symbol-file lib02_$testfile.sl $expect_out(1,string)\n"
+#gdb_expect {
+#  -re "add symbol table.*y or n.*$"\
+#          {send_gdb "y\n"
+#           gdb_expect {
+#             -re "$gdb_prompt $" {pass "add-symbol-file"}
+#             timeout {fail "(timeout) add-symbol-file"}
+#           }}
+#  -re "$gdb_prompt $"\
+#          {fail "add-symbol-file"}
+#  timeout {fail "(timeout) add-symbol-file"}
+#}
+
+# Verify that we can manually load the symbols for all libraries
+# which weren't already loaded.
+#
+# Warning!  On a machine with little free swap space, this may
+# fail!
+#
+send_gdb "sharedlibrary\n"
+gdb_expect {
+  -re "Reading symbols from.*done.*$gdb_prompt $"\
+          {pass "sharedlibrary"}
+  -re "$gdb_prompt $"\
+          {fail "sharedlibrary"}
+  timeout {fail "(timeout) sharedlibrary"}
+}
+
+# Rerun the program, this time verifying that we can set the
+# threshhold high enough to avoid hitting it.
+#
+# It appears that gdb isn't freeing memory when rerunning, as one
+# would expect.  To avoid potentially hitting a virtual memory
+# ceiling, start with a fresh gdb.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+send_gdb "break main\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break at main"}
+  -re "$gdb_prompt $"\
+          {fail "set break at main"}
+  timeout {fail "(timeout) set break at main"}
+}
+
+send_gdb "set auto-solib-add 9999\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "set auto-solib-add threshold to practical infinity"}
+  timeout {fail "(timeout) set auto-solib-add threshold to practical infinity"}
+}
+send_gdb "run\n"
+gdb_expect {
+  -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+          {fail "rerun threshold at practical infinity (still hit threshold)"}
+  -re "$gdb_prompt $"\
+          {pass "rerun with threshold at practical infinity"}
+  timeout {fail "(timeout) rerun with threshold at practical infinity"}
+}
+
+# Rerun the program, this time altogether disabling the auto loading
+# feature.  There should be no information at all about shared
+# libraries now.
+#
+# ??rehrauer: Personally, I'd call that a bug, since it doesn't give
+# you the ability to manually load single shlibs (you need the text
+# start address that 'info share' normall gives you).  On the other
+# hand, one can easily choose to load them all...
+#
+# It appears that gdb isn't freeing memory when rerunning, as one
+# would expect.  To avoid potentially hitting a virtual memory
+# ceiling, start with a fresh gdb.
+#
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+send_gdb "break main\n"
+gdb_expect {
+  -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
+          {pass "set break at main"}
+  -re "$gdb_prompt $"\
+          {fail "set break at main"}
+  timeout {fail "(timeout) set break at main"}
+}
+
+send_gdb "set auto-solib-add 0\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "set auto-solib-add threshold to 0"}
+  timeout {fail "(timeout) set auto-solib-add threshold to 0"}
+}
+send_gdb "run\n"
+gdb_expect {
+  -re ".*warning. Symbols for some libraries have not been loaded, because.*
+doing so would exceed the size threshold specified by auto-solib-add.*
+To manually load symbols, use the 'sharedlibrary' command.*
+To raise the threshold, set auto-solib-add to a larger value and rerun.*
+the program.*$gdb_prompt $"\
+          {fail "rerun threshold at 0 (still hit threshold)"}
+  -re "$gdb_prompt $"\
+          {pass "rerun with threshold at 0"}
+  timeout {fail "(timeout) rerun with threshold at 0"}
+}
+
+# Verify that we can still manually load symbols for all libraries.
+# (We'll assume that if the last shlib's symbols are loaded, that
+# all of them were.)
+#
+# Note that we set the GDB "height" variable to prevent GDB from
+# prompting 
+#
+# Warning!  On a machine with little free swap space, this may
+# fail!
+#
+send_gdb "set height 9999\n"
+gdb_expect {
+  -re "$gdb_prompt $"\
+          {pass "set screen page height to practical infinity"}
+  timeout {fail "(timeout) set screen page height to practical infinity"}
+}
+send_gdb "sharedlibrary\n"
+gdb_expect {
+  -re ".*Reading symbols from .*/lib02-so-thresh\\.sl\\.\\.\\.done\\..*$gdb_prompt $"\
+          {pass "manually load all symbols"}
+  -re "$gdb_prompt $"\
+          {fail "manually load all symbols"}
+  timeout {fail "(timeout) manually load all symbols"}
+}
+
+#cd ..
+return 0
diff --git a/gdb/testsuite/gdb.hp/so-thresh.linkopts b/gdb/testsuite/gdb.hp/so-thresh.linkopts
new file mode 100644
index 0000000..547b4eb
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/so-thresh.linkopts
@@ -0,0 +1,5 @@
+# Linker options for so-thresh test
+-l00-so-thresh
+-l01-so-thresh
+-l02-so-thresh
+
diff --git a/gdb/testsuite/gdb.hp/so-thresh.mk b/gdb/testsuite/gdb.hp/so-thresh.mk
new file mode 100644
index 0000000..343185c
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/so-thresh.mk
@@ -0,0 +1,73 @@
+# Make file for so-thresh test
+
+OBJDIR=.
+SRCDIR=.
+CFLAGS = +DA1.1 -g
+
+# This is how to build this generator.
+gen-so-thresh.o: ${SRCDIR}/gen-so-thresh.c
+	$(CC) $(CFLAGS) -o gen-so-thresh.o -c ${SRCDIR}/gen-so-thresh.c
+gen-so-thresh: gen-so-thresh.o
+	$(CC) $(CFLAGS) -o gen-so-thresh gen-so-thresh.o
+
+# This is how to run this generator.
+# This target should be made before the 'all' target,
+# to ensure that the shlib sources are all available.
+require_shlibs: gen-so-thresh
+	if ! [ -a lib00-so-thresh.c ] ; then \
+	  gen-so-thresh ; \
+	fi
+	if ! [ -a lib01-so-thresh.c ] ; then \
+	  gen-so-thresh ; \
+	fi
+	if ! [ -a lib02-so-thresh.c ] ; then \
+	  gen-so-thresh ; \
+	fi
+
+# This is how to build all the shlibs.
+# Be sure to first make the require_shlibs target!
+lib00-so-thresh.o: lib00-so-thresh.c
+	$(CC) $(CFLAGS) +Z -o lib00-so-thresh.o -c lib00-so-thresh.c
+lib00-so-thresh.sl: lib00-so-thresh.o
+	$(LD) $(LDFLAGS) -b -o lib00-so-thresh.sl lib00-so-thresh.o
+lib01-so-thresh.o: lib01-so-thresh.c
+	$(CC) $(CFLAGS) +Z -o lib01-so-thresh.o -c lib01-so-thresh.c
+lib01-so-thresh.sl: lib01-so-thresh.o
+	$(LD) $(LDFLAGS) -b -o lib01-so-thresh.sl lib01-so-thresh.o
+lib02-so-thresh.o: lib02-so-thresh.c
+	$(CC) $(CFLAGS) +Z -o lib02-so-thresh.o -c lib02-so-thresh.c
+lib02-so-thresh.sl: lib02-so-thresh.o
+	$(LD) $(LDFLAGS) -b -o lib02-so-thresh.sl lib02-so-thresh.o
+
+
+
+
+# For convenience, here's names for all pieces of all shlibs.
+SHLIB_SOURCES = \
+	lib00-so-thresh.c \
+	lib01-so-thresh.c \
+	lib02-so-thresh.c 
+
+SHLIB_OBJECTS = $(SHLIB_SOURCES:.c=.o)
+SHLIBS = $(SHLIB_SOURCES:.c=.sl)
+SHLIB_NAMES = $(SHLIB_SOURCES:.c=)
+EXECUTABLES = $(SHLIBS) gen-so-thresh so-thresh
+OBJECT_FILES = $(SHLIB_OBJECTS) gen-so-thresh.o so-thresh.o
+
+shlib_objects: $(SHLIB_OBJECTS)
+shlibs: $(SHLIBS)
+
+# This is how to build the debuggable testcase that uses the shlibs.
+so-thresh.o: so-thresh.c
+	$(CC) $(CFLAGS) -o so-thresh.o -c so-thresh.c
+so-thresh: shlibs so-thresh.o
+	$(LD) $(LDFLAGS) -o so-thresh -lc -L${OBJDIR} -c so-thresh.linkopts /opt/langtools/lib/end.o /lib/crt0.o so-thresh.o
+
+# Yeah, but you should first make the require_shlibs target!
+all: so-thresh gen-so-thresh
+
+# To remove everything built via this makefile...
+clean:
+	rm -f lib0*-so-thresh.*
+	rm -f *.o gen-so-thresh so-thresh.linkopts so-thresh.c
+	rm -f so-thresh
diff --git a/gdb/testsuite/gdb.hp/so-thresh.sh b/gdb/testsuite/gdb.hp/so-thresh.sh
new file mode 100755
index 0000000..dc90270
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/so-thresh.sh
@@ -0,0 +1,12 @@
+#!/bin/ksh
+#
+# This script is a "wrapper" to use the so-thresh.mk
+# Makefile.  See the comments in so-thresh.exp
+# regarding why this script exists.
+#
+
+#set -o xtrace
+#set -o verbose
+
+MAKEFLAGS=
+make -v -f so-thresh.mk require_shlibs all
diff --git a/gdb/testsuite/gdb.hp/start-stop.c b/gdb/testsuite/gdb.hp/start-stop.c
new file mode 100644
index 0000000..dcf2c7e
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/start-stop.c
@@ -0,0 +1,161 @@
+/* BeginSourceFile start_stop.c
+
+  This file creates and deletes threads, so that wdb
+  can be tested on thread delete.
+
+  To compile:
+
+      cc -Ae +DA1.0 -g -o start_stop -lpthread start_stop.c
+
+  To run:
+  
+     start_stop     --normal run
+     start_stop 1   --waits in each thread to keep it alive.
+*/
+
+#include <unistd.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+#include <pthread.h>
+
+#define TRUE 1
+#define FALSE 0
+#define OUTER_LOOP_COUNT 3
+#define N_THREADS 3
+#define MAX_LOCAL_VAL 40
+
+/* Uncomment to turn on debugging output */
+/* #define START_DEBUG  */
+
+/* True if waiting for attach.
+ */
+int wait_here;
+
+/* Thing to check for debugging purposes.
+*/
+int a_global = 0;
+
+/* Thread-local storage.
+ */
+__thread int a_thread_local;
+
+/* Check the results of thread-local storage.
+ */
+int thread_local_val[ N_THREADS ];
+int val_debugger_saw[ N_THREADS ];
+
+/* Routine for each thread to run, does nothing.
+ */
+void *spin( vp )
+    void * vp;
+{
+    int me = (int) vp;
+    int i;
+    
+#ifdef START_DEBUG
+    printf( "== In thread %d\n", me );
+#endif
+
+    a_global++;
+
+    a_thread_local = 0;
+    for( i = 0; i < a_global; i++ ) {
+        a_thread_local += i;
+    }
+
+    thread_local_val[ me ] = a_thread_local; /* Line 67 */
+
+    printf( "== Thread %d, a_thread_local is %d\n",
+            (int) vp, a_thread_local );
+
+   if( wait_here ) {
+       /* Extend life of thread to extend life of thread-local var.
+        * This makes life easier for human debugging (though you'd
+        * probably want to make the delay longer).
+        */
+       sleep( 5 );
+   }
+}
+
+void
+do_pass( pass )
+    int pass;
+{
+    int i;
+    pthread_t t[ N_THREADS ];
+    int err;
+
+    for( i = 0; i < N_THREADS; i++) {
+        thread_local_val[i] = 0;
+        val_debugger_saw[i] = 0;
+    }
+   
+    /* Start N_THREADS threads, then join them so
+     * that they are terminated.
+     */
+    for( i = 0; i < N_THREADS; i++ ) {
+        err = pthread_create( &t[i], NULL, spin, (void *)i );
+        if( err != 0 ) {
+            printf( "== Start/stop, error in thread %d create\n", i );
+        }
+    }
+
+    for( i = 0; i < N_THREADS; i++ ) {
+        err = pthread_join(t[i], NULL );    /* Line 105 */
+        if( err != 0 ) {                    /* Line 106 */
+            printf( "== Start/stop, error in thread %d join\n", i );
+        }
+    }
+
+    i = 10;  /* Line 109.  Null line for setting bpts on. */
+
+/*#ifdef START_DEBUG*/
+    for( i = 0; i < N_THREADS; i++) {
+        printf( "   Local in thread %d was %d, debugger saw %d\n",
+                 i, thread_local_val[i], val_debugger_saw[i] );
+    }
+    printf( "== Pass %d done\n", pass );
+/*#endif*/
+   
+}
+
+void
+do_it()
+{
+    /* We want to start some threads and then
+     * end them, and then do it again and again
+     */
+    int i;
+    int dummy;
+    
+    for( i = 0; i < OUTER_LOOP_COUNT; i++ ) {
+        do_pass( i );
+        dummy = i;      /* Line 134, null line for setting bps on */
+    }
+}
+
+main( argc, argv )
+int    argc;
+char **argv;
+{
+   wait_here = FALSE;
+   if((argc > 1) && (0 != argv )) {
+       if( 1 == atoi( argv[1] ) )
+           wait_here = TRUE;
+    }
+
+#ifdef START_DEBUG 
+    printf( "== Test starting\n" );
+#endif
+
+    do_it();
+    
+#ifdef START_DEBUG
+    printf( "== Test done\n" );
+#endif
+
+    return(0);
+}
+
+/* EndSourceFile */
diff --git a/gdb/testsuite/gdb.hp/start-stop.exp b/gdb/testsuite/gdb.hp/start-stop.exp
new file mode 100644
index 0000000..4f70f51
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/start-stop.exp
@@ -0,0 +1,360 @@
+# start_stop.exp -- Expect script to test a threaded pgm which has terminating threads
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Comment out for now, since this test is (sometimes?) hanging on 11.0
+#
+# return 0
+
+# use this to debug:
+#
+#log_user 1
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+# NOTE: this command undoes any up/down stuff!
+#
+proc pre_timeout {} {
+    global timeout
+
+    set timeout [expr "$timeout + 100"]
+}
+
+proc post_timeout {} {
+    global timeout
+    global oldtimeout
+
+    set timeout $oldtimeout
+    gdb_test "p \$pc" ".*" ""
+}
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+set testfile start-stop
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# To build the executable we need to link against the thread library.
+#
+#     cc -Ae -g -o start-stop -lpthread start-stop.c
+#
+#compile "${srcfile} -Ae -g -lpthread -o ${binfile}"
+
+if {$gcc_compiled == 0} {
+    set additional_flags "additional_flags=-Ae"
+} else {
+    set additional_flags ""
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}.o" object [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_load ${binfile}
+if ![runto_main] then {
+   fail "Can't run to main"
+   return 0
+}
+
+set oldtimeout $timeout
+#set timeout [expr "$timeout + 200"]
+set oldverbose $verbose
+#set verbose 40
+
+gdb_test "b do_pass" ".*" "set do_pass bp"
+gdb_test "c" ".*Breakpoint.*do_pass.*" "run to do_pass"
+
+# Should be only one thread.
+#
+pre_timeout
+send_gdb "info thread\n"
+gdb_expect {
+    -re ".*2 process.*$gdb_prompt $" { fail "Old code for 'thread.c'" }
+    -re ".*2 system thread.*1 sys.*$gdb_prompt $" { fail "Too many threads" }
+    -re ".*1 system thread.*$gdb_prompt $" { pass "Just one thread" }
+    -re ".*$gdb_prompt $" { fail "no thread info" }
+    timeout { fail "timeout on info thread 1" }
+}
+post_timeout
+
+# Run to a point after the thread creates (105 is just
+# before the first join).
+#
+# The "== Thread" stuff is output from the computing threads.
+#
+gdb_test "b 105" ".*Breakpoint.*" "set 105 bp"
+
+pre_timeout
+send_gdb "c\n"
+gdb_expect {
+    -re ".*== Thread.*== Thread.*== Thread.*105.*$gdb_prompt $" {
+        pass "new threads created and ended"
+        set threads_exist 0
+    }
+    -re ".*== Thread.*== Thread.*105.*$gdb_prompt $" {
+        pass "new threads created and ended"
+        set threads_exist 1
+    }
+    -re ".*== Thread.*.*105.*$gdb_prompt $" {
+        pass "new threads created and ended"
+        set threads_exist 2
+    }
+    -re ".*New thread.*New th.*New th.*105.*$gdb_prompt $" { 
+        pass "new threads created" 
+        set threads_exist 3
+    }
+    -re ".*Breakpoint.*105.*$gdb_prompt $" {
+        set threads_exist 0
+        fail "didn't see any threads" 
+    }
+    -re ".*$gdb_prompt $" {
+        set threads_exist 0
+        fail "didn't even hit bp"
+    }
+    timeout { 
+        set threads_exist -1 
+        fail "timeout on continue" 
+    }
+}
+
+# Look at the threads again.  We expect that some of
+# the threads may have already finished execution.
+#
+send_gdb "info thread\n" 
+gdb_expect {
+    -re ".*4.*3.*2.* 1.*thread.*$gdb_prompt $" { set seen_threads 3 }
+    -re ".*3.*2.* 1.*thread.*$gdb_prompt $"    { set seen_threads 2 }
+    -re ".*2.* 1.*thread.*$gdb_prompt $"       { set seen_threads 1 }
+    -re ".* 1.*thread.*$gdb_prompt $"          { set seen_threads 0 }
+    -re ".*$gdb_prompt $"                      { set seen_threads 0 }
+    timeout          { 
+        set seen_threads -10
+        fail "timeout on second info thread" 
+    }
+}
+post_timeout
+
+if { $seen_threads == $threads_exist } {
+    pass "saw all threads that existed"
+} else {
+    if { $seen_threads > $threads_exist } {
+        fail "may have seen threads that didn't finish exiting yet"
+    } else {
+        fail "didn't see live threads"
+    }
+}
+
+gdb_test "cle"  ".*Deleted.*" "del bp at 105"
+
+# Check that threads are being consumed at the join call.
+# We expect to join three times.  If we ever see the bp at
+# 111, we've gone too far.
+#
+gdb_test "b 106" ".*Breakpoint.*106.*" "set bp at 106"
+gdb_test "b 111" ".*Breakpoint.*111.*" "set bp at 111"
+
+# This one is sure: we're already in the loop.
+#
+gdb_test "c"    ".*Breakpoint.*106.*" "hit bp at 106 1st time, 2 left"
+
+# Did we go around the loop again?
+#
+send_gdb "c\n"
+gdb_expect {
+    -re ".*Breakpoint.*111.*" { 
+        fail "didn't join right 1" 
+        gdb_test "cle" ".*" ""
+    }
+    -re ".*Breakpoint.*106.*" { 
+        pass "hit bp at 106 2nd time, 1 left" 
+        send_gdb "c\n" 
+        gdb_expect {
+            -re ".*Breakpoint.*111.*" { 
+                 fail "didn't join right 2" 
+                 gdb_test "cle" ".*" ""
+            }
+            -re ".*Breakpoint.*106.*" { 
+                 pass "hit bp at 106 3rd time, 0 left"
+                 gdb_test "cle" ".*" ""
+                 gdb_test "c" ".*Breakpoint.*111.*" ""
+                 gdb_test "cle" ".*" ""
+            }
+            timeout { fail "timeout going around the loop"}
+        }
+    }
+    timeout { fail "timeout getting to 106"}
+}
+
+# Should only be one thread now.
+#
+pre_timeout
+send_gdb "info thread\n"
+gdb_expect {
+    -re ".*2 system thread.*1 sys.*$gdb_prompt $" { fail "Too many threads" }
+    -re ".*1 system th.*$gdb_prompt $"            { pass "Just one thread"  }
+    -re ".*$gdb_prompt $"     { pass "One thread shown as no threads, ok" }
+    timeout               { fail "timeout third info thread" }
+}
+post_timeout
+
+#============================= Begin pass 2 ===========
+#
+# Ok, go around again
+#
+gdb_test "c" ".*Breakpoint.*do_pass.*" "hit do_pass bp again 2"
+gdb_test "b 105" ".*Breakpoint.*" "set 105 bp 2"
+
+pre_timeout
+send_gdb "c\n"
+gdb_expect {
+    -re ".*== Thread.*== Thread.*== Thread.*$gdb_prompt $" {
+        pass "new threads created and ended 2"
+        set threads_exist 0
+    }
+    -re ".*== Thread.*== Thread.*$gdb_prompt $" {
+        pass "new threads created and ended 2"
+        set threads_exist 1
+    }
+    -re ".*== Thread.*$gdb_prompt $" {
+        pass "new threads created and ended 2"
+        set threads_exist 2
+    }
+    -re ".*New system thread.*New sys.*New.*105.*$gdb_prompt $" { 
+        pass "new threads created 2" 
+        set threads_exist 3
+    }
+    timeout { 
+        set threads_exist -1 
+        fail "timeout on continue 2" 
+    }
+}
+
+# Look at the threads again.  We expect that some of
+# the threads may have already finished execution.
+#
+send_gdb "info thread\n" 
+gdb_expect {
+    -re ".*4.*3.*2.* 1.*thread.*$gdb_prompt $" { set seen_threads 3 }
+    -re ".*3.*2.* 1.*thread.*$gdb_prompt $"    { set seen_threads 2 }
+    -re ".*2.* 1.*thread.*$gdb_prompt $"       { set seen_threads 1 }
+    -re ".* 1.*thread.*$gdb_prompt $"          { set seen_threads 0 }
+    -re ".*$gdb_prompt $"                      { set seen_threads 0 }
+    timeout          { 
+        set seen_threads -10
+        fail "timeout on second info thread 2" 
+    }
+}
+post_timeout
+
+if { $seen_threads == $threads_exist } {
+    pass "saw all threads that existed"
+} else {
+    if { $seen_threads > $threads_exist } {
+        fail "may have seen threads that didn't finish exiting yet 2"
+    } else {
+        fail "didn't see live threads 2"
+    }
+}
+
+gdb_test "cle"  ".*Deleted.*" "del bp at 105 2"
+
+# Check that threads are being consumed at the join call.
+# We expect to join three times.  If we ever see the bp at
+# 111, we've gone too far.
+#
+gdb_test "b 106" ".*Breakpoint.*106.*" "set bp at 106 2"
+gdb_test "b 111" ".*Breakpoint.*111.*" "set bp at 111 2"
+
+# This one is sure: we're already in the loop.
+#
+gdb_test "c"  ".*Breakpoint.*106.*" "hit bp at 106 1st time, 2 left 2"
+
+# Did we go around the loop again?
+#
+send_gdb "c\n"
+gdb_expect {
+    -re ".*Breakpoint.*111.*" { 
+        fail "didn't join right 1, pass 2" 
+        gdb_test "cle" ".*" ""
+    }
+    -re ".*Breakpoint.*106.*" { 
+        pass "hit bp at 106 2nd time, 1 left, pass 2" 
+        send_gdb "c\n" 
+        gdb_expect {
+            -re ".*Breakpoint.*111.*" { 
+                 fail "didn't join right 2, pass 2" 
+                 gdb_test "cle" ".*" ""
+            }
+            -re ".*Breakpoint.*106.*" { 
+                 pass "hit bp at 106 3rd time, 0 left, pass 2"
+                 gdb_test "cle" ".*" ""
+                 gdb_test "c" ".*Breakpoint.*111.*" ""
+                 gdb_test "cle" ".*" ""
+            }
+            timeout { fail "timeout going around loop, pass 2"}
+        }
+    }
+    timeout { fail "timeout continue to 106, pass 2"}
+}
+
+# Should only be one thread now.
+#
+pre_timeout
+send_gdb "info thread\n"
+gdb_expect {
+    -re ".*2 system thread.*1 sys.*$gdb_prompt $" { fail "Too many threads, pass 2" }
+    -re ".*1 system thread.*$gdb_prompt $" { pass "Just one thread, pass 2" }
+    -re ".*$gdb_prompt $" { pass "One thread shown as no threads, ok, pass 2" }
+    timeout { fail "timeout last info thread, pass 2" }
+}
+post_timeout
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
diff --git a/gdb/testsuite/gdb.hp/sum.c b/gdb/testsuite/gdb.hp/sum.c
new file mode 100644
index 0000000..c28afa5
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/sum.c
@@ -0,0 +1,15 @@
+/* This is a sample program for the HP/DDE debugger. */
+#include <stdio.h>
+
+#ifdef __STDC__ 
+int sum(int list[], int low, int high)
+#else
+int sum(list, low, high)
+int list[], low, high;
+#endif
+    {
+        int i, s = 0;
+        for (i = low; i <= high; i++)
+            s += list[i];
+        return(s);
+    }
diff --git a/gdb/testsuite/gdb.hp/templ-hp.cc b/gdb/testsuite/gdb.hp/templ-hp.cc
new file mode 100644
index 0000000..25241dc
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/templ-hp.cc
@@ -0,0 +1,785 @@
+/* This test code is from Wendell Baker (wbaker@comet.berkeley.edu) */
+
+#include <stddef.h>
+
+int a_i;
+char a_c;
+double a_d;
+
+typedef void *Pix;
+
+int
+f(int i)
+{ return 0; }
+
+int
+f(int i, char c)
+{ return 0; }
+
+int
+f(int i, char c, double d)
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs)
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs, void (*fig)(int, char))
+{ return 0; }
+
+int
+f(int i, char c, double d, char *cs, void (*fig)(char, int))
+{ return 0; }
+
+class R {
+public:
+    int i;
+};
+class S {
+public:
+    int i;
+};
+class T {
+public:
+    int i;
+};
+
+char g(char, const char, volatile char)
+{ return 'c'; }
+char g(R, char&, const char&, volatile char&)
+{ return 'c'; }
+char g(char*, const char*, volatile char*)
+{ return 'c'; }
+char g(S, char*&, const char*&, volatile char*&)
+{ return 'c'; }
+
+signed char g(T,signed char, const signed char, volatile signed char)
+{ return 'c'; }
+signed char g(T, R, signed char&, const signed char&, volatile signed char&)
+{ return 'c'; }
+signed char g(T, signed char*, const signed char*, volatile signed char*)
+{ return 'c'; }
+signed char g(T, S, signed char*&, const signed char*&, volatile signed char*&)
+{ return 'c'; }
+
+unsigned char g(unsigned char, const unsigned char, volatile unsigned char)
+{ return 'c'; }
+unsigned char g(R, unsigned char&, const unsigned char&, volatile unsigned char&)
+{ return 'c'; }
+unsigned char g(unsigned char*, const unsigned char*, volatile unsigned char*)
+{ return 'c'; }
+unsigned char g(S, unsigned char*&, const unsigned char*&, volatile unsigned char*&)
+{ return 'c'; }
+
+short g(short, const short, volatile short)
+{ return 0; }
+short g(R, short&, const short&, volatile short&)
+{ return 0; }
+short g(short*, const short*, volatile short*)
+{ return 0; }
+short g(S, short*&, const short*&, volatile short*&)
+{ return 0; }
+
+signed short g(T, signed short, const signed short, volatile signed short)
+{ return 0; }
+signed short g(T, R, signed short&, const signed short&, volatile signed short&)
+{ return 0; }
+signed short g(T, signed short*, const signed short*, volatile signed short*)
+{ return 0; }
+signed short g(T, S, double, signed short*&, const signed short*&, volatile signed short*&)
+{ return 0; }
+
+unsigned short g(unsigned short, const unsigned short, volatile unsigned short)
+{ return 0; }
+unsigned short g(R, unsigned short&, const unsigned short&, volatile unsigned short&)
+{ return 0; }
+unsigned short g(unsigned short*, const unsigned short*, volatile unsigned short*)
+{ return 0; }
+unsigned short g(S, unsigned short*&, const unsigned short*&, volatile unsigned short*&)
+{ return 0; }
+
+int g(int, const int, volatile int)
+{ return 0; }
+int g(R, int&, const int&, volatile int&)
+{ return 0; }
+int g(int*, const int*, volatile int*)
+{ return 0; }
+int g(S, int*&, const int*&, volatile int*&)
+{ return 0; }
+
+signed int g(T, signed int, const signed int, volatile signed int)
+{ return 0; }
+signed int g(T, R, signed int&, const signed int&, volatile signed int&)
+{ return 0; }
+signed int g(T, signed int*, const signed int*, volatile signed int*)
+{ return 0; }
+signed int g(T, S, signed int*&, const signed int*&, volatile signed int*&)
+{ return 0; }
+
+unsigned int g(unsigned int, const unsigned int, volatile unsigned int)
+{ return 0; }
+unsigned int g(R, unsigned int&, const unsigned int&, volatile unsigned int&)
+{ return 0; }
+unsigned int g(unsigned int*, const unsigned int*, volatile unsigned int*)
+{ return 0; }
+unsigned int g(S, unsigned int*&, const unsigned int*&, volatile unsigned int*&)
+{ return 0; }
+
+long g(long, const long, volatile long)
+{ return 0; }
+long g(R, long&, const long&, volatile long&)
+{ return 0; }
+long g(long*, const long*, volatile long*)
+{ return 0; }
+long g(S, long*&, const long*&, volatile long*&)
+{ return 0; }
+
+signed long g(T, signed long, const signed long, volatile signed long)
+{ return 0; }
+signed long g(T, R, signed long&, const signed long&, volatile signed long&)
+{ return 0; }
+signed long g(T, signed long*, const signed long*, volatile signed long*)
+{ return 0; }
+signed long g(T, S, signed long*&, const signed long*&, volatile signed long*&)
+{ return 0; }
+
+unsigned long g(unsigned long, const unsigned long, volatile unsigned long)
+{ return 0; }
+unsigned long g(S, unsigned long&, const unsigned long&, volatile unsigned long&)
+{ return 0; }
+unsigned long g(unsigned long*, const unsigned long*, volatile unsigned long*)
+{ return 0; }
+unsigned long g(S, unsigned long*&, const unsigned long*&, volatile unsigned long*&)
+{ return 0; }
+
+#ifdef __GNUC__
+long long g(long long, const long long, volatile long long)
+{ return 0; }
+long long g(S, long long&, const long long&, volatile long long&)
+{ return 0; }
+long long g(long long*, const long long*, volatile long long*)
+{ return 0; }
+long long g(R, long long*&, const long long*&, volatile long long*&)
+{ return 0; }
+
+signed long long g(T, signed long long, const signed long long, volatile signed long long)
+{ return 0; }
+signed long long g(T, R, signed long long&, const signed long long&, volatile signed long long&)
+{ return 0; }
+signed long long g(T, signed long long*, const signed long long*, volatile signed long long*)
+{ return 0; }
+signed long long g(T, S, signed long long*&, const signed long long*&, volatile signed long long*&)
+{ return 0; }
+
+unsigned long long g(unsigned long long, const unsigned long long, volatile unsigned long long)
+{ return 0; }
+unsigned long long g(R, unsigned long long*, const unsigned long long*, volatile unsigned long long*)
+{ return 0; }
+unsigned long long g(unsigned long long&, const unsigned long long&, volatile unsigned long long&)
+{ return 0; }
+unsigned long long g(S, unsigned long long*&, const unsigned long long*&, volatile unsigned long long*&)
+{ return 0; }
+#endif
+
+float g(float, const float, volatile float)
+{ return 0; }
+float g(char, float&, const float&, volatile float&)
+{ return 0; }
+float g(float*, const float*, volatile float*)
+{ return 0; }
+float g(char, float*&, const float*&, volatile float*&)
+{ return 0; }
+
+double g(double, const double, volatile double)
+{ return 0; }
+double g(char, double&, const double&, volatile double&)
+{ return 0; }
+double g(double*, const double*, volatile double*)
+{ return 0; }
+double g(char, double*&, const double*&, volatile double*&)
+{ return 0; }
+
+#ifdef __GNUC__
+long double g(long double, const long double, volatile long double)
+{ return 0; }
+long double g(char, long double&, const long double&, volatile long double&)
+{ return 0; }
+long double g(long double*, const long double*, volatile long double*)
+{ return 0; }
+long double g(char, long double*&, const long double*&, volatile long double*&)
+{ return 0; }
+#endif
+
+class c {
+public:
+    c(int) {};
+    int i;
+};
+
+class c g(c, const c, volatile c)
+{ return 0; }
+c g(char, c&, const c&, volatile c&)
+{ return 0; }
+c g(c*, const c*, volatile c*)
+{ return 0; }
+c g(char, c*&, const c*&, volatile c*&)
+{ return 0; }
+
+/*
+void h(char = 'a')
+{ }
+void h(char, signed char = 'a')
+{ }
+void h(unsigned char = 'a')
+{ }
+*/
+/*
+void h(char = (char)'a')
+{ }
+void h(char, signed char = (signed char)'a')
+{ }
+void h(unsigned char = (unsigned char)'a')
+{ }
+
+
+void h(short = (short)43)
+{ }
+void h(char, signed short = (signed short)43)
+{ }
+void h(unsigned short = (unsigned short)43)
+{ }
+
+void h(int = (int)43)
+{ }
+void h(char, signed int = (signed int)43)
+{ }
+void h(unsigned int = (unsigned int)43)
+{ }
+
+
+void h(long = (long)43)
+{ }
+void h(char, signed long = (signed long)43)
+{ }
+void h(unsigned long = (unsigned long)43)
+{ }
+
+#ifdef __GNUC__
+void h(long long = 43)
+{ }
+void h(char, signed long long = 43)
+{ }
+void h(unsigned long long = 43)
+{ }
+#endif
+
+void h(float = 4.3e-10)
+{ }
+void h(double = 4.3)
+{ }
+#ifdef __GNUC__
+void h(long double = 4.33e33)
+{ }
+#endif
+*/
+void printf(const char *format, ... )
+{
+    // elipsis
+}
+
+class T1 {
+public:
+    static void* operator new(size_t);
+    static void operator delete(void *pointer);
+
+    void operator=(const T1&);
+    T1& operator=(int);
+
+    int operator==(int) const;
+    int operator==(const T1&) const;
+    int operator!=(int) const;
+    int operator!=(const T1&) const;
+
+    int operator<=(int) const;
+    int operator<=(const T1&) const;
+    int operator<(int) const;
+    int operator<(const T1&) const;
+    int operator>=(int) const;
+    int operator>=(const T1&) const;
+    int operator>(int) const;
+    int operator>(const T1&) const;
+
+    void operator+(int) const;
+    T1& operator+(const T1&) const;
+    void operator+=(int) const;
+    T1& operator+=(const T1&) const;
+
+    T1& operator++() const;
+
+    void operator-(int) const;
+    T1& operator-(const T1&) const;
+    void operator-=(int) const;
+    T1& operator-=(const T1&) const;
+
+    T1& operator--() const;
+
+    void operator*(int) const;
+    T1& operator*(const T1&) const;
+    void operator*=(int) const;
+    T1& operator*=(const T1&) const;
+
+    void operator/(int) const;
+    T1& operator/(const T1&) const;
+    void operator/=(int) const;
+    T1& operator/=(const T1&) const;
+
+    void operator%(int) const;
+    T1& operator%(const T1&) const;
+    void operator%=(int) const;
+    T1& operator%=(const T1&) const;
+
+    void operator&&(int) const;
+    T1& operator&&(const T1&) const;
+
+    void operator||(int) const;
+    T1& operator||(const T1&) const;
+
+    void operator&(int) const;
+    T1& operator&(const T1&) const;
+    void operator&=(int) const;
+    T1& operator&=(const T1&) const;
+
+    void operator|(int) const;
+    T1& operator|(const T1&) const;
+    void operator|=(int) const;
+    T1& operator|=(const T1&) const;
+
+    void operator^(int) const;
+    T1& operator^(const T1&) const;
+    void operator^=(int) const;
+    T1& operator^=(const T1&) const;
+
+    T1& operator!() const;
+    T1& operator~() const;
+};
+
+void* 
+T1::operator new(size_t)
+{ return 0; }
+
+void
+T1::operator delete(void *pointer)
+{ }
+
+class T2 {
+public:
+    T2(int i): integer(i)
+	{ }
+    int integer;
+};
+
+int operator==(const T2&, const T2&)
+{ return 0; }
+int operator==(const T2&, char)
+{ return 0; }
+int operator!=(const T2&, const T2&)
+{ return 0; }
+int operator!=(const T2&, char)
+{ return 0; }
+
+int operator<=(const T2&, const T2&)
+{ return 0; }
+int operator<=(const T2&, char)
+{ return 0; }
+int operator<(const T2&, const T2&)
+{ return 0; }
+int operator<(const T2&, char)
+{ return 0; }
+int operator>=(const T2&, const T2&)
+{ return 0; }
+int operator>=(const T2&, char)
+{ return 0; }
+int operator>(const T2&, const T2&)
+{ return 0; }
+int operator>(const T2&, char)
+{ return 0; }
+
+T2 operator+(const T2 t, int i)
+{ return t.integer + i; }
+T2 operator+(const T2 a, const T2& b)
+{ return a.integer + b.integer; }
+T2& operator+=(T2& t, int i)
+{ t.integer += i; return t; }
+T2& operator+=(T2& a, const T2& b)
+{ a.integer += b.integer; return a; }
+
+T2 operator-(const T2 t, int i)
+{ return t.integer - i; }
+T2 operator-(const T2 a, const T2& b)
+{ return a.integer - b.integer; }
+T2& operator-=(T2& t, int i)
+{ t.integer -= i; return t; }
+T2& operator-=(T2& a, const T2& b)
+{ a.integer -= b.integer; return a; }
+
+T2 operator*(const T2 t, int i)
+{ return t.integer * i; }
+T2 operator*(const T2 a, const T2& b)
+{ return a.integer * b.integer; }
+T2& operator*=(T2& t, int i)
+{ t.integer *= i; return t; }
+T2& operator*=(T2& a, const T2& b)
+{ a.integer *= b.integer; return a; }
+
+T2 operator/(const T2 t, int i)
+{ return t.integer / i; }
+T2 operator/(const T2 a, const T2& b)
+{ return a.integer / b.integer; }
+T2& operator/=(T2& t, int i)
+{ t.integer /= i; return t; }
+T2& operator/=(T2& a, const T2& b)
+{ a.integer /= b.integer; return a; }
+
+T2 operator%(const T2 t, int i)
+{ return t.integer % i; }
+T2 operator%(const T2 a, const T2& b)
+{ return a.integer % b.integer; }
+T2& operator%=(T2& t, int i)
+{ t.integer %= i; return t; }
+T2& operator%=(T2& a, const T2& b)
+{ a.integer %= b.integer; return a; }
+
+template<class T>
+class T5 {
+public:
+    T5(int);
+    T5(const T5<T>&);
+    ~T5();
+    static void* operator new(size_t);
+    static void operator delete(void *pointer);
+    int value();
+    
+    static T X;
+    T x;
+    int val;
+};
+
+template<class T>
+T5<T>::T5(int v)
+{ val = v; }
+
+template<class T>
+T5<T>::T5(const T5<T>&)
+{}
+
+template<class T>
+T5<T>::~T5()
+{}
+
+template<class T>
+void*
+T5<T>::operator new(size_t)
+{ return 0; }
+
+template<class T>
+void
+T5<T>::operator delete(void *pointer)
+{ }
+
+template<class T>
+int
+T5<T>::value()
+{ return val; }
+
+
+#if ! defined(__GNUC__) || defined(GCC_BUG)
+template<class T>
+T T5<T>::X;
+#endif
+
+
+
+
+T5<char> t5c(1);
+T5<int> t5i(2);
+T5<int (*)(char, void *)> t5fi1(3);
+T5<int (*)(int, double **, void *)> t5fi2(4);
+
+ 
+
+
+
+
+class x {
+public:
+    int (*manage[5])(double,
+		     void *(*malloc)(unsigned size),
+		     void (*free)(void *pointer));
+    int (*device[5])(int open(const char *, unsigned mode, unsigned perms, int extra = 0), 
+		     int *(*read)(int fd, void *place, unsigned size),
+		     int *(*write)(int fd, void *place, unsigned size),
+		     void (*close)(int fd));
+};
+T5<x> t5x(5);
+
+#if !defined(__GNUC__) || (__GNUC__ >= 2 && __GNUC_MINOR__ >= 6)
+template class T5<char>;
+template class T5<int>;
+template class T5<int (*)(char, void *)>;
+template class T5<int (*)(int, double **, void *)>;
+template class T5<x>;
+#endif
+
+class T7 {
+public:
+    static int get();
+    static void put(int);
+};
+
+int
+T7::get()
+{ return 1; }
+
+void
+T7::put(int i)
+{
+    // nothing
+}
+
+// More template kinds.  GDB 4.16 didn't handle these, but
+// Wildebeest does.  Note: Assuming HP aCC is used to compile
+// this file; with g++ or HP cfront or other compilers the
+// demangling may not get done correctly.
+
+// Ordinary template, to be instantiated with different types
+template<class T>
+class Foo {
+public:
+  int x;
+  T t;
+  T foo (int, T);
+};
+
+
+template<class T> T Foo<T>::foo (int i, T tt)
+{
+  return tt;
+}
+
+// Template with int parameter
+
+template<class T, int sz>
+class Bar {
+public:
+  int x;
+  T t;
+  T bar (int, T);
+};
+
+
+template<class T, int sz> T Bar<T, sz>::bar (int i, T tt)
+{
+  if (i < sz)
+    return tt;
+  else
+    return 0;
+}
+
+// function template with int parameter
+template<class T> int dummy (T tt, int i)
+{
+  return tt;
+}
+
+// Template with partial specializations
+template<class T1, class T2>
+class Spec {
+public:
+  int x;
+  T1 spec (T2);
+};
+
+template<class T1, class T2>
+T1 Spec<T1, T2>::spec (T2 t2)
+{
+  return 0;
+}
+
+template<class T>
+class Spec<T, T*> {
+public:
+  int x;
+  T spec (T*);
+};
+
+template<class T>
+T Spec<T, T*>::spec (T * tp)
+{
+  return *tp;
+}
+
+// Template with char parameter
+template<class T, char sz>
+class Baz {
+public:
+  int x;
+  T t;
+  T baz (int, T);
+};
+
+template<class T, char sz> T Baz<T, sz>::baz (int i, T tt)
+{
+  if (i < sz)
+    return tt;
+  else
+    return 0;
+}
+
+// Template with char * parameter
+template<class T, char * sz>
+class Qux {
+public:
+  int x;
+  T t;
+  T qux (int, T);
+};
+
+template<class T, char * sz> T Qux<T, sz>::qux (int i, T tt)
+{
+  if (sz[0] == 'q')
+    return tt;
+  else
+    return 0;
+}
+
+// Template with a function pointer parameter
+template<class T, int (*f)(int) >
+class Qux1 {
+public:
+  int x;
+  T t;
+  T qux (int, T);
+};
+
+template<class T, int (*f)(int)> T Qux1<T, f>::qux (int i, T tt)
+{
+  if (f != 0)
+    return tt;
+  else
+    return 0;
+}
+
+// Some functions to provide as arguments to template
+int gf1 (int a) {
+  return a * 2 + 13;
+}
+int gf2 (int a) {
+  return a * 2 + 26;
+}
+
+char string[3];
+
+
+// Template for nested instantiations
+
+template<class T>
+class Garply {
+public:
+  int x;
+  T t;
+  T garply (int, T);
+};
+
+template<class T> T Garply<T>::garply (int i, T tt)
+{
+  if (i > x)
+    return tt;
+  else
+    {
+      x += i;
+      return tt;
+    }
+}
+
+
+int main()
+{
+    int i;
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    i = i + 1;
+
+    // New tests added here
+
+  Foo<int> fint;
+  Foo<char> fchar;
+  Foo<volatile char *> fvpchar;
+
+  Bar<int, 33> bint;
+  Bar<int, (4 > 3)> bint2;
+
+  Baz<int, 's'> bazint;
+  Baz<char, 'a'> bazint2;
+
+  Qux<char, string> quxint2;
+  Qux<int, string> quxint;
+
+  Qux1<int, gf1> qux11;
+
+  int x = fint.foo(33, 47);
+  char c = fchar.foo(33, 'x');
+  volatile char * cp = fvpchar.foo(33, 0);
+  
+  int y = dummy<int> (400, 600);
+
+  int z = bint.bar(55, 66);
+  z += bint2.bar(55, 66);
+
+  c = bazint2.baz(4, 'y');
+  c = quxint2.qux(4, 'z');
+  
+  y = bazint.baz(4,3);
+  y = quxint.qux(4, 22);
+  y += qux11.qux(4, 22);
+
+  y *= gf1(y) - gf2(y);
+  
+  Spec<int, char> sic;
+  Spec<int, int *> siip;
+
+  sic.spec ('c');
+  siip.spec (&x);
+
+  Garply<int> f;
+  Garply<char> fc;
+  f.x = 13;
+
+  Garply<Garply<char> > nf;
+  nf.x = 31;
+  
+  x = f.garply (3, 4);
+  
+  fc = nf.garply (3, fc);
+
+  y = x + fc.x;
+  
+
+  return 0;
+    
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.hp/templ-hp.exp b/gdb/testsuite/gdb.hp/templ-hp.exp
new file mode 100644
index 0000000..64ca53d
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/templ-hp.exp
@@ -0,0 +1,381 @@
+# Copyright (C) 1992, 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+
+# More tests for different kinds of template parameters,
+# templates with partial specializations, nested templates, etc.
+# These have been tested only with HP aCC.  They probably won't
+# work with other compilers because of differences in mangling
+# schemes. 
+# Added by Satish Pai <pai@apollo.hp.com> 1997-09-25 
+
+
+set ws "\[\r\n\t \]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "templ-hp"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+ 
+
+# Create and source the file that provides information about the compiler
+# used to compile the test case.
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+
+}
+
+#
+#  Test printing of the types of templates.
+#
+
+proc test_ptype_of_templates {} {
+    global gdb_prompt
+
+    send_gdb "ptype T5<int>\n"
+    gdb_expect {
+	-re "type = class T5<int> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*static int X;\r\n\[ \t\]*int x;\r\n\[ \t\]*int val;\r\n\r\n\[ \t\]*T5\\(int\\);\r\n\[ \t\]*T5\\(class T5<int> const &\\);\r\n\[ \t\]*void ~T5\\(int\\);\r\n\[ \t\]*static void \\* new\\(unsigned int\\);\r\n\[ \t\]*static void delete\\(void \\*\\);\r\n\[ \t\]*int value\\(void\\);\r\n\[ \t\]*\\}\r\n$gdb_prompt $" { pass "ptype T5<int>" }
+	-re ".*$gdb_prompt $" { fail "ptype T5<int>" }
+	timeout { fail "ptype T5<int> (timeout)" }
+    }
+
+    send_gdb "ptype t5i\n"
+    gdb_expect {
+	-re "type = class T5<int> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*static int X;\r\n\[ \t\]*int x;\r\n\[ \t\]*int val;\r\n\r\n\[ \t\]*T5\\(int\\);\r\n\[ \t\]*T5\\(class T5<int> const &\\);\r\n\[ \t\]*void ~T5\\(int\\);\r\n\[ \t\]*static void \\* new\\(unsigned int\\);\r\n\[ \t\]*static void delete\\(void \\*\\);\r\n\[ \t\]*int value\\(void\\);\r\n\[ \t\]*\\}\r\n$gdb_prompt $" { pass "ptype t5i<int> 1" }
+	-re "type = class T5<int> \{.*public:.*static int X;.*int x;.*int val;.*.*T5 \\(int\\);.*.*void ~T5 \\(int\\).*.*.*int value \\(void\\);.*\}.*$gdb_prompt $" { 
+	    pass "ptype t5i"
+	}
+	-re ".*$gdb_prompt $" { fail "ptype t5i" }
+	timeout { fail "ptype t5i (timeout)" }
+    }
+}
+
+#
+#  Test breakpoint setting on template methods.
+#
+
+proc test_template_breakpoints {} {
+    global gdb_prompt
+    global testfile
+    global srcdir
+
+    send_gdb "break T5<int>::T5\n"
+    gdb_expect {
+	-re "0. cancel.*\r\n.1. all.*\r\n.2. *.*\r\n.3. *.*\r\n> $" {
+	    gdb_test "0" \
+		"cancelled" \
+		"constructor breakpoint"
+	}
+	-re ".0. cancel\r\n.1. all\r\n.2. T5<int>::T5\\(T5<int> const &\\) at .*/templates.cc:.*\r\n.3. T5<int>::T5\\(int\\) at .*/templates-hp.cc:.*\r\n> $" {
+	    gdb_test "0" \
+		"cancelled" \
+		"constructor breakpoint"
+	}
+	-re ".*$gdb_prompt $" { fail "constructor breakpoint" }
+	default { fail "constructor breakpoint (timeout)" }
+    }
+    
+    gdb_test "break T5<int>::~T5" \
+	"Breakpoint.*at.* file .*${testfile}.cc, line.*" \
+	"destructor breakpoint"    
+    
+    gdb_test "break T5<int>::value" \
+	"Breakpoint.*at.* file .*${testfile}.cc, line.*" \
+	"value method breakpoint"
+
+    delete_breakpoints
+}
+
+#
+#  Test calling of template methods.
+#
+
+proc test_template_calls {} {
+    global gdb_prompt
+
+    send_gdb "print t5i.value()\n"
+    gdb_expect {
+	-re ".* = 2\r\n$gdb_prompt $" { pass "print t5i.value()" }
+	-re "Cannot invoke functions on this machine.*$gdb_prompt $" {
+	    fail "print t5i.value()"
+	}
+	-re ".*$gdb_prompt $" { fail "print t5i.value()" }
+	timeout { fail "print t5i.value() (timeout)" }
+    }
+}
+
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global prompt
+    global supports_template_debugging
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    source ${binfile}.ci
+
+    if { !$supports_template_debugging } {
+	warning "compiler lacks debugging info for templates; tests suppressed." 0
+	return
+    }
+
+    test_ptype_of_templates
+    test_template_breakpoints
+
+    if [ runto_main ] {
+	test_template_calls
+    }
+}
+
+do_tests
+
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+
+# set it up at a breakpoint so we can play with the variable values
+#
+if ![runto_main] then {
+    perror "couldn't run to breakpoint"
+    continue
+}
+
+send_gdb "print fint\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{x = 0, t = 0\\}\r\n$gdb_prompt $" { pass "print fint" }
+   -re "$gdb_prompt $"                     { fail "print fint" }
+   timeout                             { fail "(timeout) print fint" }
+}
+
+send_gdb "print fvpchar\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{x = 0, t = 0x0\\}\r\n$gdb_prompt $" { pass "print fvpchar" }
+   -re "$gdb_prompt $"                     { fail "print fvpchar" }
+   timeout                             { fail "(timeout) print fvpchar" }
+}
+
+# Template Foo<T>
+
+send_gdb "ptype Foo\n"   
+gdb_expect {   
+   -re "type = template <(class |)T> (class |)Foo \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*T t;\r\n\\}\r\ntemplate instantiations:\r\n\[ \t\]*(class |)Foo<volatile char \\*>\r\n\[ \t\]*(class |)Foo<char>\r\n\[ \t\]*(class |)Foo<int>\r\n$gdb_prompt $" { pass "ptype Foo" }
+   -re "$gdb_prompt $"                     { fail "ptype Foo" }
+   timeout                             { fail "(timeout) ptype Foo" }
+}
+
+# ptype Foo<int>
+
+send_gdb "ptype fint\n"   
+gdb_expect {   
+   -re "type = (class |)Foo<int> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int foo\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype fint" }
+   -re "$gdb_prompt $"                     { fail "ptype fint" }
+   timeout                             { fail "(timeout) ptype fint" }
+}
+
+# ptype Foo<char>
+
+send_gdb "ptype fchar\n"   
+gdb_expect {   
+   -re "type = (class |)Foo<char> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*char t;\r\n\r\n\[ \t\]*char foo\\(int, char\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype fchar" }
+   -re "$gdb_prompt $"                     { fail "ptype fchar" }
+   timeout                             { fail "(timeout) ptype fchar" }
+}
+
+# ptype Foo<volatile char *>
+
+send_gdb "ptype fvpchar\n"   
+gdb_expect {   
+   -re "type = (class |)Foo<volatile char \\*> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*volatile char \\*t;\r\n\r\n\[ \t\]*volatile char \\* foo\\(int, volatile char \\*\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype fvpchar" }
+   -re "$gdb_prompt $"                     { fail "ptype fvpchar" }
+   timeout                             { fail "(timeout) ptype fvpchar" }
+}
+
+# print a function from Foo<volatile char *>
+
+send_gdb "print Foo<volatile char *>::foo\n"   
+gdb_expect {   
+   -re "\\$\[0-9\]* = \\{volatile char \\*\\((class |)Foo<volatile char \\*> \\*, int, volatile char \\*\\)\\} $hex <Foo<volatile char \\*>::foo\\(int, volatile char \\*\\)>\r\n$gdb_prompt $" { pass "print Foo<volatile char *>::foo" }
+   -re "$gdb_prompt $"                     { fail "print Foo<volatile char *>::foo" }
+   timeout                             { fail "(timeout) print Foo<volatile char *>::foo" }
+}
+
+# Template Bar<T, int>
+
+send_gdb "ptype Bar\n"   
+gdb_expect {   
+   -re "type = template <(class |)T, (class |)sz> (class |)Bar \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*T t;\r\n\\}\r\ntemplate instantiations:\r\n\[ \t\]*(class |)Bar<int,1>\r\n\[ \t\]*(class |)Bar<int,33>\r\n$gdb_prompt $" { pass "ptype Bar" }
+   -re "$gdb_prompt $"                     { fail "ptype Bar" }
+   timeout                             { fail "(timeout) ptype Bar" }
+}
+
+
+# ptype Bar<int,33>
+
+send_gdb "ptype bint\n"   
+gdb_expect {   
+   -re "type = (class |)Bar<int,33> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int bar\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype bint" }
+   -re "$gdb_prompt $"                     { fail "ptype bint" }
+   timeout                             { fail "(timeout) ptype bint" }
+}
+
+# ptype Bar<int, (4>3)>
+
+send_gdb "ptype bint2\n"   
+gdb_expect {   
+   -re "type = (class |)Bar<int,1> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int bar\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype bint2" }
+   -re "$gdb_prompt $"                     { fail "ptype bint2" }
+   timeout                             { fail "(timeout) ptype bint2" }
+}
+
+# Template Baz<T, char>
+
+send_gdb "ptype Baz\n"   
+gdb_expect {   
+   -re "type = template <(class |)T, (class |)sz> (class |)Baz \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*T t;\r\n\\}\r\ntemplate instantiations:\r\n\[ \t\]*(class |)Baz<char,97>\r\n\[ \t\]*(class |)Baz<int,115>\r\n$gdb_prompt $" { pass "ptype Baz" }
+   -re "$gdb_prompt $"                     { fail "ptype Baz" }
+   timeout                             { fail "(timeout) ptype Baz" }
+}
+
+
+# ptype Baz<int, 's'>
+
+send_gdb "ptype bazint\n"   
+gdb_expect {   
+   -re "type = (class |)Baz<int,115> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int baz\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype bazint" }
+   -re "$gdb_prompt $"                     { fail "ptype bazint" }
+   timeout                             { fail "(timeout) ptype bazint" }
+}
+
+# ptype Baz<char, 'a'>
+
+send_gdb "ptype bazint2\n"   
+gdb_expect {   
+   -re "type = (class |)Baz<char,97> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*char t;\r\n\r\n\[ \t\]*char baz\\(int, char\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype bazint2" }
+   -re "$gdb_prompt $"                     { fail "ptype bazint2" }
+   timeout                             { fail "(timeout) ptype bazint2" }
+}
+
+# Template Qux<T, int (*f)(int) >
+
+send_gdb "ptype Qux\n"   
+gdb_expect {   
+   -re "type = template <(class |)T, (class |)sz> (class |)Qux \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*T t;\r\n\\}\r\ntemplate instantiations:\r\n\[ \t\]*(class |)Qux<int,&string>\r\n\[ \t\]*(class |)Qux<char,&string>\r\n$gdb_prompt $" { pass "ptype Qux" }
+   -re "$gdb_prompt $"                     { fail "ptype Qux" }
+   timeout                             { fail "(timeout) ptype Qux" }
+}
+
+# pt Qux<int,&string>
+
+send_gdb "ptype quxint\n"   
+gdb_expect {   
+   -re "type = class Qux<int,&string> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int qux\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype quxint" }
+   -re "$gdb_prompt $"                     { fail "ptype quxint" }
+   timeout                             { fail "(timeout) ptype quxint" }
+}
+
+# pt Qux<char,0>
+
+send_gdb "ptype quxint2\n"   
+gdb_expect {   
+   -re "type = class Qux<char,&string> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*char t;\r\n\r\n\[ \t\]*char qux\\(int, char\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype quxint2" }
+   -re "$gdb_prompt $"                     { fail "ptype quxint2" }
+   timeout                             { fail "(timeout) ptype quxint2" }
+}
+
+# Template Spec<T1, T2>
+
+send_gdb "ptype Spec\n"   
+gdb_expect {   
+   -re "type = template <(class |)T1, (class |)T2> (class |)Spec \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\\}\r\ntemplate instantiations:\r\n\[ \t\]*(class |)Spec<int,int \\*>\r\n\[ \t\]*(class |)Spec<int,char>\r\n$gdb_prompt $" { pass "ptype Spec" }
+   -re "$gdb_prompt $"                     { fail "ptype Spec" }
+   timeout                             { fail "(timeout) ptype Spec" }
+}
+
+# pt Spec<char,0>
+
+send_gdb "ptype siip\n"   
+gdb_expect {   
+   -re "type = class Spec<int,int \\*> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\r\n\[ \t\]*int spec\\(int \\*\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype siip" }
+   -re "$gdb_prompt $"                     { fail "ptype siip" }
+   timeout                             { fail "(timeout) ptype siip" }
+}
+
+# pt Garply<int>
+
+send_gdb "ptype Garply<int>\n"   
+gdb_expect {   
+   -re "type = class Garply<int> \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*int t;\r\n\r\n\[ \t\]*int garply\\(int, int\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype Garply<int>" }
+   -re "$gdb_prompt $"                     { fail "ptype Garply<int>" }
+   timeout                             { fail "(timeout) ptype Garply<int>" }
+}
+
+# ptype of nested template name
+
+send_gdb "ptype Garply<Garply<char> >\n"   
+gdb_expect {   
+   -re "type = (class |)Garply<Garply<char> > \\{\r\n\[ \t\]*public:\r\n\[ \t\]*int x;\r\n\[ \t\]*(class |)Garply<char> t;\r\n\r\n\[ \t\]*(class |)Garply<char> garply\\(int, (class |)Garply<char>\\);\r\n\\}\r\n$gdb_prompt $" { pass "ptype Garply<Garply<char> >" }
+   -re "$gdb_prompt $"                     { fail "ptype Garply<Garply<char> >" }
+   timeout                             { fail "(timeout) ptype Garply<Garply<char> >" }
+}
+
+# print out a function from a nested template name
+
+send_gdb "print Garply<Garply<char> >::garply\n"
+gdb_expect {
+   -re "\\$\[0-9\]* = \\{(class |)Garply<char> \\((class |)Garply<Garply<char> > \\*, int, (class |)Garply<char>\\)\\} $hex <Garply<Garply<char>>::garply\\(int, (class |)Garply<char>\\)>\r\n$gdb_prompt $" { pass "print Garply<Garply<char> >::garply" }
+   -re ".*$gdb_prompt $" { fail "print Garply<Garply<char> >::garply" }
+   timeout { fail "print Garply<Garply<char> >::garply (timeout)" }
+}
+
+# UNFORTUNATELY, "break Garply<Garply<char> >::garply" doesn't yet work.
+
+#send_gdb "break Garply<Garply<char> >::garply
+#gdb_expect {
+#   -re "Breakpoint \[0-9\]* at $hex: file .*templates.cc, line.*\r\n$gdb_prompt $" { pass "break Garply<Garply<char> >::garply" }
+#   -re ".*$gdb_prompt $" { fail "break Garply<Garply<char> >::garply" }
+#   timeout { fail "break Garply<Garply<char> >::garply (timeout)" }
+#}
diff --git a/gdb/testsuite/gdb.hp/thr-lib.c b/gdb/testsuite/gdb.hp/thr-lib.c
new file mode 100644
index 0000000..15cd168
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/thr-lib.c
@@ -0,0 +1,79 @@
+/* Thread local in a library.
+*/
+#include "thr-lib.h"
+/*
+ *     #define NTHREADS    4
+ *     #define NUM_ELEMS  12
+ */
+
+extern void* adder( void * );
+
+pthread_mutex_t mutex; /* mutex for protecting global data total */
+
+int numbers[NUM_ELEMS] = {5, 4, 3, 2, 1, 6, 7, 8, 9, 10, 12, 11};
+int total = 0;
+
+int debugger_saw[NTHREADS][ELEMS_PER_THREAD]; /* [4][3] */
+int the_code_saw[NTHREADS][ELEMS_PER_THREAD];
+
+int get_number(i)
+int i;
+{
+   /* sleep to force context switch to another thread in non-MP system 
+    * so that TLS symbols are used by multiple threads concurrently
+    * in some way. 
+    */
+   sleep(1); 
+   return numbers[i];
+}
+
+main()
+{
+   pthread_t	thread[NTHREADS];
+   void 	*status;
+   int 		i, j, ret;
+
+   printf("== Thread: Test started\n");
+
+   for( i = 0; i < NTHREADS; i++ ) {
+       for( j = 0; j < ELEMS_PER_THREAD; j++ ) {
+           debugger_saw[i][j] = 0;
+           the_code_saw[i][j] = 0;
+       }
+   }
+   
+   ret = pthread_mutex_init(&mutex, NULL);
+   if (ret != 0) {
+      printf("== Thread: pthread_mutex_init() error: %d\n", ret);
+      exit(1);
+   }
+
+   for (i=0; i < NTHREADS; i++) {
+      ret = pthread_create( &thread[i],
+                            NULL,
+                            adder,
+                            (void *) i);
+      if (ret != 0) {
+         printf("== Thread: pthread_create() error: %d\n", ret);
+         exit(1);
+      }
+      printf("== Thread: thread %d created\n", i);
+   }
+   
+   for (i=0; i < NTHREADS; i++) {
+      pthread_join( thread[i], &status);
+   }
+
+   printf("== Thread: total = %d\n", total); /* Expect "78" */
+
+   for( i = 0; i < NTHREADS; i++ ) {
+       for( j = 0; j < ELEMS_PER_THREAD; j++ ) {
+           printf( "== Thread: the debugger saw %d, the program saw %d\n",
+                   debugger_saw[i][j],
+                   the_code_saw[i][j] );
+       }
+   }
+
+   printf("== Thread: Test ended\n");
+   exit(0);
+}
diff --git a/gdb/testsuite/gdb.hp/thr-lib.exp b/gdb/testsuite/gdb.hp/thr-lib.exp
new file mode 100644
index 0000000..53bf466
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/thr-lib.exp
@@ -0,0 +1,234 @@
+# thr-lib.exp -- Expect script to test thread-local storage in lib
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+# NOTE: this command undoes any up/down stuff!
+#
+proc pre_timeout {} {
+    global timeout
+
+    set timeout [expr "$timeout + 100"]
+}
+
+proc post_timeout {} {
+    global timeout
+    global oldtimeout
+
+    set timeout $oldtimeout
+    gdb_test "p \$pc" ".*" ""
+}
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+set testfile thr-lib
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set libsrc  ${srcdir}/${subdir}/${testfile}lib.c
+set mainobj ${objdir}/${testfile}.o
+set libobj  ${objdir}/${testfile}lib.o
+set libsl   ${objdir}/${subdir}/${testfile}lib.sl
+set binfile ${objdir}/${subdir}/${testfile}
+
+# To build the executable we need to do this:
+#
+#   cc -c -Aa -g -D_HPUX_SOURCE -D_REENTRANT +DA1.0 ./gdb.hp/thr-lib.c
+#   cc -c -Aa -g -D_HPUX_SOURCE -D_REENTRANT +DA1.0 +z ./gdb.hp/thr-liblib.c
+#   ld -o thread_local_in_lib.lib.sl -b ./gdb.hp/thr-liblib.o
+#   ld -a archive /opt/langtools/lib/crt0.o /opt/langtools/lib/end.o \
+#   > thr-lib.o ./gdb.hp/thr-liblib.sl \
+#   > -o thr-lib -lpthread -lc
+#
+remote_exec build  "$CC ${srcfile} -c -Aa -g -D_HPUX_SOURCE -D_REENTRANT +DA1.0"
+remote_exec build  "$CC ${libsrc}  -c -Aa -g -D_HPUX_SOURCE -D_REENTRANT +DA1.0 +z"
+remote_exec build "ld -o ${libsl} -b ${libobj}"
+remote_exec build "ld -a archive /opt/langtools/lib/crt0.o /opt/langtools/lib/end.o ${mainobj} ${libsl} -lpthread -lc -o ${binfile}"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set oldtimeout $timeout
+#set timeout [expr "$timeout + 200"]
+set oldverbose $verbose
+
+gdb_load ${binfile}
+
+# Here we go: test various things.
+#
+gdb_test "b adder" ".*Cannot break on adder without a running program.*" "shared loc, needs to run"
+gdb_test "b main" ".*" ""
+gdb_test "run"    ".*Breakpoint 1, main.*" ""
+
+# Set a bp to inspect the results
+#
+gdb_test "b 67" ".*Breakpoint 2.*" ""
+
+# get to a point where we can set the collection breakpoint.
+#
+gdb_test "tb adder" ".*Breakpoint 3.*line 47.*"  "set bp in shared lib"
+gdb_test "c"       ".*Switched to.*adder.*"     "run to shared lib rtn"
+
+# Check locations of things
+#
+gdb_test "i ad sum" ".*Symbol \"sum\" is a thread-local variable.*offset.*from the thread base register mpsfu_high.*" "find sum"
+gdb_test "i add x"      ".*Symbol \"x\" is a thread-local variable.*"  "find x"
+
+# Set a breakpoint later on in "adder" and
+# collect the thread local's value.  
+#
+gdb_test "b 61" ".*Breakpoint 4.*61.*"   "Set collection bp"
+
+# extra check for grins, expect to hit "adder" in thread 2 first
+# but could be wrong...
+#
+gdb_test "info thread" ".*\\\* 2.*thread.*thread.*" "two threads"
+
+# Can't use "gdb_test", as it uses "$gdb_prompt $" in
+# testing the result.  Our new prompt is ">", with
+# no trailing space, so we can't do this just by
+# changing "prompt". 
+#
+# Anyway, I couldn't get expect to see the ">" prompt,
+# during the command addition, so I just punted.
+# _You_ are welcome to try, if you want!
+#
+send_gdb "commands 4\n"
+gdb_expect {
+    -re "(.*Type commands.*\"end\"\.\r\n\>)" {
+        pass "start commands"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "start commands"
+    }
+}
+
+# Assume we're in commands-input mode.  (Self-debug stuff turned off)
+#
+send_gdb "silent\n"
+#send_gdb "p id\n"
+#send_gdb "p j\n"
+#send_gdb "p x\[j\]\n"
+send_gdb "set debugger_saw\[id\]\[j\] = x\[j\]\n"
+send_gdb "continue\n"
+send_gdb "end\n"
+
+gdb_expect {
+    -re ".*set.*cont.*$gdb_prompt $" {
+        pass "add commands"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "add commands"
+    }
+}
+
+# Check out of paranoia.
+#
+send_gdb "info break 4\n"
+gdb_expect {
+    -re ".*breakpoint.*set debugger_saw.*continue.*$gdb_prompt $" {
+        pass "Commands added"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Commands not added."
+    }
+}
+
+# We now expect to run through the whole application
+# Since this'll run for while, set a generous timeout.
+#
+set timeout [expr "$timeout + 30"]
+send_gdb "c\n"
+gdb_expect {
+    -re ".*Program exited normally.*$gdb_prompt $" {
+        fail "program runaway"
+    }
+    -re ".*Breakpoint 2.*67.*$gdb_prompt $" {
+        pass "get to end"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "No progress?"
+    }
+    timeout { fail "timeout" }
+}
+set timeout $oldtimeout
+
+gdb_test "p debugger_saw" ".*5, 1, 9.*4, 6, 10.*3, 7, 12.*2, 8, 11.*" "check results"
+
+# Often only one misses; let's get detailed!
+#
+gdb_test "p debugger_saw\[0\]\[0\]" ".*= 5.*" "1"
+gdb_test "p debugger_saw\[0\]\[1\]" ".*= 1.*" "2"
+gdb_test "p debugger_saw\[0\]\[2\]" ".*= 9.*" "3"
+gdb_test "p debugger_saw\[1\]\[0\]" ".*= 4.*" "4"
+gdb_test "p debugger_saw\[1\]\[1\]" ".*= 6.*" "5"
+gdb_test "p debugger_saw\[1\]\[2\]" ".*= 10.*" "6"
+gdb_test "p debugger_saw\[2\]\[0\]" ".*= 3.*" "7"
+gdb_test "p debugger_saw\[2\]\[1\]" ".*= 7.*" "8"
+gdb_test "p debugger_saw\[2\]\[2\]" ".*= 12.*" "9"
+gdb_test "p debugger_saw\[3\]\[0\]" ".*= 2.*" "10"
+gdb_test "p debugger_saw\[3\]\[1\]" ".*= 8.*" "11"
+gdb_test "p debugger_saw\[3\]\[2\]" ".*= 11.*" "12"
+
+send_gdb "i th\n" 
+gdb_expect {
+    -re ".* 1.*system thread.* 2.*system thread.*$gdb_prompt $" {
+        fail "Too many threads left"
+    }
+    -re ".*\\\* 1.*system thread.*main.*$gdb_prompt $" {
+        pass "Expect only base thread"
+    }
+    -re ".*No stack.*$gdb_prompt $" {
+        fail "runaway"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Hunh?"
+    }
+    timeout { fail "timeout" }
+}
+
+gdb_test "c" ".*exited normally.*" "run to completion"
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
diff --git a/gdb/testsuite/gdb.hp/thr-lib.h b/gdb/testsuite/gdb.hp/thr-lib.h
new file mode 100644
index 0000000..c9395df
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/thr-lib.h
@@ -0,0 +1,7 @@
+#include <stdio.h>
+#include <pthread.h>
+
+#define NTHREADS 	 4
+#define NUM_ELEMS	12
+
+#define ELEMS_PER_THREAD (NUM_ELEMS/NTHREADS)
diff --git a/gdb/testsuite/gdb.hp/thr-liblib.c b/gdb/testsuite/gdb.hp/thr-liblib.c
new file mode 100644
index 0000000..a3effcc
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/thr-liblib.c
@@ -0,0 +1,92 @@
+#include <stdio.h>
+
+/* Library code for thread local in lib test.
+*/
+#include "thr-lib.h"
+
+extern pthread_mutex_t mutex;
+extern int get_number();
+extern int total;
+extern int the_code_saw[NTHREADS][ELEMS_PER_THREAD];
+
+/* The debugger should see this without a declaration.
+ *
+ * extern int debugger_saw[NTHREADS][ELEMS_PER_THREAD]; 
+ */
+
+/* The actual thread locals.
+ */
+__thread int sum;
+__thread int x[ ELEMS_PER_THREAD ]; /* [3] */
+
+void sumup()
+{
+   int j;
+
+   sum = 0;
+   for (j = 0; j < ELEMS_PER_THREAD; j++) {
+      sum += x[j];
+   }
+
+   if( sum == x[0] )
+       /* It won't be "==", but this lets us set a breakpoint
+        * and look at the thread-local storage.
+        */
+       sum++;
+
+   x[0] = x[2];  /* Another no-op for debugger use */
+}
+
+void *adder( vid )
+   void * vid;
+{
+   int id;
+   int i, j;
+   int ret;
+
+   id = (int) vid;
+   
+   /* printf( "== Thread: Welcome to adder %d\n", id ); */
+
+   for (j = 0; j < ELEMS_PER_THREAD; j++) {
+      x[j] = 0;
+   }
+
+   for (i = id, j = 0; i < NUM_ELEMS; i += NTHREADS, j++ ) {
+
+   /*   printf( "== Thread: id %d, i %d, j %d\n", id, i, j );
+      fflush( stdout ); */
+    
+      x[j] = get_number(i); /* {0,1,2,3} +0, +4, +8 */
+
+      /* Record for posterity; the debugger will gather
+       * the same data here, using "x[j]".
+       */
+      the_code_saw[ id ][ j ] = x[j];   
+
+   /*   printf( "== Thread %d, sample %d, val %d, i %d\n", id, j, x[j],i );
+      fflush( stdout ); */
+   }
+
+   sumup();
+   /* printf("== Thread: adder %d contributes total %d\n", id, sum); */
+
+   /* protect global data */
+   ret = pthread_mutex_lock(&mutex);
+   if (ret != 0) {
+      printf("== Thread: pthread_mutex_lock() error: %d\n", ret);
+      exit(1);
+   }
+
+   total += sum;
+
+   ret = pthread_mutex_unlock(&mutex);
+   if (ret != 0) {
+      printf("== Thread: pthread_mutex_unlock() error: %d\n", ret);
+      exit(1);
+   }
+
+   if( NTHREADS != 4 || ELEMS_PER_THREAD != 3 || NUM_ELEMS != 12 ) {
+      printf( "** ERROR in test code **\n" );
+   }
+}
diff --git a/gdb/testsuite/gdb.hp/thr-stg.exp b/gdb/testsuite/gdb.hp/thr-stg.exp
new file mode 100644
index 0000000..19d69ee
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/thr-stg.exp
@@ -0,0 +1,255 @@
+# thread_local_stg.exp -- Expect script to test thread-local storage
+# Copyright (C) 1992 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# use this to debug:
+#
+#log_user 1
+
+# Thread stuff is _slow_; prepare for long waits.
+#
+# Further, this test has some "null" lines designed
+# to consume output from gdb that was too late to be
+# matched (sequence is "gdb_test" sends; timeout and
+# on to next send; result finally comes in; mismatch).
+#
+# The null command is 'gdb_test "p \$pc" ".*" ""'
+# NOTE: this command undoes any up/down stuff!
+#
+proc pre_timeout {} {
+    global timeout
+
+    set timeout [expr "$timeout + 100"]
+}
+
+proc post_timeout {} {
+    global timeout
+    global oldtimeout
+
+    set timeout $oldtimeout
+    gdb_test "p \$pc" ".*" ""
+}
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+if { ![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"] } {
+    verbose "HPUX thread test ignored for non-hppa or pre-HP/UX-10.30 targets."
+    return 0
+}
+
+set testfile start-stop
+set srcfile ${srcdir}/${subdir}/${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile}] {
+    return -1
+}
+
+# To build the executable we need to link against the thread library.
+#
+#     cc -Ae -g -o start_stop -lpthread start_stop.c
+#
+#compile "${srcfile} -Ae -g -lpthread -o ${binfile}"
+
+if {$gcc_compiled == 0} {
+    set additional_flags "additional_flags=-Ae"
+} else {
+    set additional_flags ""
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}.o" object [list debug $additional_flags]] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+remote_exec build "ld /usr/ccs/lib/crt0.o ${binfile}.o -lcl -lpthread  -lc /opt/langtools/lib/end.o -o ${binfile}"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+gdb_load ${binfile}
+if ![runto_main] then {
+   fail "Can't run to main"
+   return 0
+}
+
+set oldtimeout $timeout
+#set timeout [expr "$timeout + 200"]
+set oldverbose $verbose
+#set verbose 40
+
+gdb_test "b do_pass" ".*"  "set do_pass bp"
+gdb_test "c" ".*do_pass.*" "run to do_pass"
+gdb_test "cle" ".*" ""
+
+# Set a breakpoint at the "spin" routine and
+# collect the thread local's value.  
+#
+gdb_test "b 67" ".*Breakpoint 3.*67.*"   "Set bp"
+
+# Can't use "gdb_test", as it uses "$gdb_prompt $" in
+# testing the result.  Our new prompt is ">", with
+# no trailing space, so we can't do this just by
+# changing "prompt". 
+#
+# Anyway, I couldn't get expect to see the ">" prompt,
+# during the command addition, so I just punted.
+# _You_ are welcome to try, if you want!
+#
+send_gdb "commands 3\n"
+gdb_expect {
+    -re "(.*Type commands.*\"end\"\.\r\n\>)" {
+        pass "start commands"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "start commands"
+    }
+}
+
+# Assume we're in commands-input mode.
+#
+send_gdb "silent\n"
+send_gdb "set val_debugger_saw\[me\] = a_thread_local\n"
+send_gdb "continue\n"
+send_gdb "end\n"
+
+gdb_expect {
+    -re ".*set.*cont.*$gdb_prompt $" {
+        pass "add commands"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "add commands"
+    }
+}
+
+# Check out of paranoia.
+#
+send_gdb "info break 3\n"
+gdb_expect {
+    -re ".*breakpoint.*set val_debugger.*continue.*$gdb_prompt $" {
+        pass "Commands added"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Commands not added."
+    }
+}
+
+# Set a bp to inspect the results
+#
+gdb_test "b 134" ".*Breakpoint 4.*" ""
+
+# We now expect to run through a whole pass, seeing 
+# specific results as noted below (actual gotten by
+# running application with debugging print statements
+# turned on.
+#
+# Since this'll run for while, set a generous timeout.
+#
+set timeout [expr "$timeout + 30"]
+send_gdb "c\n"
+gdb_expect {
+    -re ".*Program exited normally.*$gdb_prompt $" {
+        fail "program runaway"
+    }
+    -re ".*Pass 0 done.*Pass 1 done.*$gdb_prompt $" {
+        fail "program runaway 2"
+    }
+    -re ".*Pass 0 done.*Breakpoint 4.*134.*$gdb_prompt $" {
+        pass "get to end of first pass"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "No progress?"
+    }
+    timeout { fail "timeout" }
+}
+
+gdb_test "p val_debugger_saw" ".*0, 1, 3.*"   "first pass"
+
+send_gdb "i th\n" 
+gdb_expect {
+    -re ".* 1.*system thread.* 2.*system thread.*$gdb_prompt $" {
+        fail "Too many threads left"
+    }
+    -re ".*\\\* 1 system thread.*$gdb_prompt $" {
+        pass "Expect only base thread"
+    }
+    -re ".*No stack.*$gdb_prompt $" {
+        fail "runaway"
+    }
+    -re ".*$gdb_prompt $" {
+        fail "Hunh?"
+    }
+    timeout { fail "timeout" }
+}
+
+gdb_test "i b"  ".*4.*breakpoint.*134.*hit.*1 time.*" "Expect 134 bp to exist"
+
+gdb_test "c" ".*Breakpoint 4.*134.*" "get to end of second pass"
+gdb_test "p val_debugger_saw" ".*6, 10, 15.*" "second pass"
+
+gdb_test "c" ".*Breakpoint 4.*134.*" "get to end of third pass"
+gdb_test "p val_debugger_saw" ".*21, 28, 36.*" "third pass"
+
+gdb_test "info bre 3" ".*already hit 9 times.*" "count of silent bp hits"
+
+# Start over and do some "info address" stuff
+#
+send_gdb "d\n"
+gdb_expect {
+   -re ".*Delete all breakpoints.*$" {
+       send_gdb "y\n"
+       gdb_expect {
+           -re ".*$gdb_prompt $" {
+               pass "del bps"
+           }
+       }
+   }
+   -re ".*$gdb_prompt $" { fail "no question" }
+}
+
+gdb_test "b spin" ".*Breakpoint 5.*" ""
+
+send_gdb "r\n"
+gdb_expect {
+   -re ".*Start it from the beginning.*$" {
+       send_gdb "y\n"
+       gdb_expect {
+           -re ".*$gdb_prompt $" { pass "restart" }
+       }
+   }
+   -re ".*Starting program.*$gdb_prompt $" {
+       pass "restart after previous fails"
+   }
+   -re ".*$gdb_prompt $" { fail "Can't restart" }
+}
+gdb_test "i ad a_global" ".*a_global.*static storage at address.*" "i ad a_global"
+gdb_test "i add me"      ".*me.*local variable at frame offset.*"  "i ad me"
+gdb_test "i ad a_thread_local" ".*a_thread_local.*a thread-local variable at offset.*" "i ad a_thread_local"
+
+# Done!
+#
+gdb_exit
+
+set timeout $oldtimeout
+set verbose $oldverbose
+
+# execute_anywhere "rm -f ${binfile}"
+#
+return 0
diff --git a/gdb/testsuite/gdb.hp/vforked-program.c b/gdb/testsuite/gdb.hp/vforked-program.c
new file mode 100644
index 0000000..52c6cd2
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/vforked-program.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+main()
+{
+  printf("Hello from vforked_program...\n");
+}
diff --git a/gdb/testsuite/gdb.hp/virtfun-hp.cc b/gdb/testsuite/gdb.hp/virtfun-hp.cc
new file mode 100644
index 0000000..6552a62
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/virtfun-hp.cc
@@ -0,0 +1,192 @@
+// Pls try the following program on virtual functions and try to do print on
+//  most of the code in main().  Almost none of them works !
+
+//
+// The inheritance structure is:
+//
+// V : VA VB
+// A : (V)
+// B : A
+// D : AD (V)
+// C : (V)
+// E : B (V) D C
+//
+
+class VA 
+{
+public:
+    int va;
+};
+
+class VB
+{
+public:
+    int vb;
+    int fvb();
+    virtual vvb();
+};
+
+class V : public VA, public VB
+{
+public:
+    int f();
+    virtual vv();
+    int w;
+};
+
+class A : virtual public V
+{
+public:
+    virtual int f();
+private:
+    int a;
+};
+
+class B : public A
+{
+public:
+    int f();
+private:
+    int b;
+};
+
+class C : public virtual V
+{
+public:
+    int c;
+};
+
+class AD
+{
+public:
+    virtual int vg() = 0;
+};
+
+class D : public AD, virtual public V
+{
+public:
+    static void s();
+    virtual int vg();
+    virtual int vd();
+    int fd();
+    int d;
+};
+
+class E : public B, virtual public V, public D, public C
+{
+public:
+    int f();
+    int vg();
+    int vv();
+    int e;
+};
+
+D   dd;
+D*  ppd = &dd;
+AD* pAd = &dd;
+
+A   a;
+B   b;
+C   c;
+D   d;
+E   e;
+V   v;
+VB  vb;
+
+
+A* 	pAa	= 	&a;
+A*	pAe	=	&e;
+
+B*	pBe	=	&e;
+
+D*	pDd	=	&d;
+D*	pDe	=	&e;
+
+V*	pVa	=	&a;
+V*	pVv	=	&v;
+V*	pVe	=	&e;
+V*     pVd	=	&d;
+
+AD*	pADe	=	&e;
+
+E*	pEe	=	&e;
+
+VB*     pVB	=	&vb;
+
+void init()
+{
+	a.vb = 1;
+	b.vb = 2;
+	c.vb = 3;
+	d.vb = 4;
+	e.vb = 5;
+	v.vb = 6;
+	vb.vb = 7;
+
+	d.d	= 1;
+	e.d	=  2;
+}
+
+extern "C" printf(const char *, ...);
+
+int all_count = 0;
+int failed_count = 0;
+
+#define TEST(EXPR, EXPECTED) \
+   ret = EXPR; \
+   if (ret != EXPECTED) {\
+      printf("Failed %s is %d, should be %d!\n", #EXPR, ret, EXPECTED); \
+      failed_count++; } \
+   all_count++;
+
+int ret;
+
+void test_calls()
+{
+	TEST(pAe->f(), 20);
+	TEST(pAa->f(), 1);
+
+	TEST(pDe->vg(), 202);
+	TEST(pADe->vg(), 202);
+	TEST(pDd->vg(), 101);
+
+	TEST(pEe->vvb(), 411);
+
+	TEST(pVB->vvb(), 407);
+
+	TEST(pBe->vvb(), 411);
+	TEST(pDe->vvb(), 411);
+
+        TEST(pEe->vd(), 282);
+        TEST(pEe->fvb(), 311);
+    
+        TEST(pEe->D::vg(), 102);
+	printf("Did %d tests, of which %d failed.\n", all_count, failed_count);
+}
+
+int main()
+{
+
+    init();
+
+    e.w = 7;
+    e.vb = 11;
+
+    test_calls();
+    return 0;
+    
+}
+
+int A::f() {return 1;}
+int B::f() {return 2;}
+void D::s() {}
+int E::f() {return 20;}
+int D::vg() {return 100+d;}
+int E::vg() {return 200+d;}
+int V::f() {return 600+w;}
+int V::vv() {return 400+w;}
+int E::vv() {return 450+w;}
+int D::fd() {return 250+d;}
+int D::vd() {return 280+d;}
+int VB::fvb() {return 300+vb;}
+int VB::vvb() {return 400+vb;}
diff --git a/gdb/testsuite/gdb.hp/virtfun-hp.exp b/gdb/testsuite/gdb.hp/virtfun-hp.exp
new file mode 100644
index 0000000..f5b3637
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/virtfun-hp.exp
@@ -0,0 +1,773 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+set ws "\[\r\n\t \]+"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "virtfun-hp"
+set srcfile ${testfile}.cc
+set binfile ${objdir}/${subdir}/${testfile}
+
+if [get_compiler_info ${binfile} "c++"] {
+    return -1;
+}
+ 
+ 
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug c++}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+
+proc gdb_virtfunc_init {} {
+    global srcdir subdir binfile
+    global gdb_prompt
+
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $binfile
+
+    send_gdb "set language c++\n"
+    gdb_expect -re "$gdb_prompt $"
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+}
+
+proc gdb_virtfunc_restart {} {
+    gdb_exit;
+    gdb_start;
+    gdb_virtfunc_init;
+    runto 'test_calls(void)';
+}
+
+#
+#  Test printing of the types of various classes.
+#
+
+proc test_ptype_of_classes {} {
+    global gdb_prompt
+    global ws
+
+    # This used to be a fail if it printed "struct" not "class".  But
+    # since this struct doesn't use any special C++ features, it is
+    # considered right for GDB to print it as "struct".
+    send_gdb "ptype VA\n"
+    gdb_expect {
+	-re "type = (struct|class) VA \{(${ws}public:|)${ws}int va;${ws}VA & operator=\\(VA const &\\);${ws}VA\\(VA const &\\);${ws}VA\\(void\\);${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VA"
+	}
+	-re "type = (struct|class) VA \{(${ws}public:|)${ws}int va;((${ws}VA & operator=\\(VA const &\\);)|(${ws}VA\\(VA const &\\);)|(${ws}VA\\(void\\);))*${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VA (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype VA"
+	}
+	timeout {
+	    fail "ptype VA (timeout)"
+	}
+    }
+
+    send_gdb "ptype VB\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VB"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\}.*$gdb_prompt $" {
+	    pass "ptype VB (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype VB"
+	}
+	timeout {
+	    fail "ptype VB (timeout)"
+	}
+    }
+
+    send_gdb "ptype V\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype V"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype V (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype V"
+	}
+	timeout {
+	    fail "ptype V (timeout)"
+	}
+    }
+
+    send_gdb "ptype A\n"
+    gdb_expect {
+        -re "type = class A : public virtual V \{\[\r\n\t \]+private:\[\r\n\t \]+int a;\[\r\n\t \]+public:\[\r\n\t \]+virtual int f\\(void\\);\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype A (aCC)"
+        }
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb\[\\\$\.\]+V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype A"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb\[\\\$\.\]+V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype A (obsolescent gcc or gdb)"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.FOO;${ws}int a;${ws}public:${ws}virtual int f.void.;${ws}\}\r\n$gdb_prompt $" {
+	    # This happens because the type is defined only after it is
+	    # too late.
+	    fail "ptype A (known failure with gcc cygnus-2.4.5-930417)"
+	    # Many of the rest of these tests have the same problem.
+	    return 0
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype A"
+	}
+	timeout {
+	    fail "ptype A (timeout)"
+	}
+    }
+
+    send_gdb "ptype B\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype B"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype B (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype B"
+	}
+	timeout {
+	    fail "ptype B (timeout)"
+	}
+    }
+
+    send_gdb "ptype C\n"
+    gdb_expect {
+        -re "type = class C : public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int c;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype C (aCC)"
+        }
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;${ws}C & operator=\\(C const &\\);${ws}C\\(int, C const &\\);${ws}C\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype C"
+	}
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(int, C const &\\);)|(${ws}C\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype C (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype C"
+	}
+	timeout {
+	    fail "ptype C (timeout)"
+	}
+    }
+
+    send_gdb "ptype AD\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype AD"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype AD (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype AD"
+	}
+	timeout {
+	    fail "ptype AD (timeout)"
+	}
+    }
+
+    send_gdb "ptype D\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype D (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype D"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype D (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype D"
+	}
+	timeout {
+	    fail "ptype D (timeout)"
+	}
+    }
+
+    send_gdb "ptype E\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype E"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype E (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype E"
+	}
+	timeout {
+	    fail "ptype E (timeout)"
+	}
+    }
+
+    send_gdb "ptype dd\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype dd (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype dd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype dd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype dd"
+	}
+	timeout {
+	    fail "ptype dd (timeout)"
+	}
+    }
+
+    send_gdb "ptype ppd\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\} \[*\]+\r\n$gdb_prompt $" {
+            pass "ptype ppd (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype ppd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype ppd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype ppd"
+	}
+	timeout {
+	    fail "ptype ppd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAd\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAd"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAd"
+	}
+	timeout {
+	    fail "ptype pAd (timeout)"
+	}
+    }
+
+    send_gdb "ptype a\n"
+    gdb_expect {
+        -re "type = class A : public virtual V \{\[\r\n\t \]+private:\[\r\n\t \]+int a;\[\r\n\t \]+public:\[\r\n\t \]+virtual int f\\(void\\);\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype a (aCC)"
+        }
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype a"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype a (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype a"
+	}
+	timeout {
+	    fail "ptype a (timeout)"
+	}
+    }
+
+    send_gdb "ptype b\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype b"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype b (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype b"
+	}
+	timeout {
+	    fail "ptype b (timeout)"
+	}
+    }
+
+    send_gdb "ptype c\n"
+    gdb_expect {
+        -re "type = class C : public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int c;\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype c (aCC)"
+        }
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;${ws}C & operator=\\(C const &\\);${ws}C\\(int, C const &\\);${ws}C\\(int\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype c"
+	}
+	-re "type = class C : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int c;((${ws}C & operator=\\(C const &\\);)|(${ws}C\\(int, C const &\\);)|(${ws}C\\(int\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype c (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype c"
+	}
+	timeout {
+	    fail "ptype c (timeout)"
+	}
+    }
+
+    send_gdb "ptype d\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\}\r\n$gdb_prompt $" {
+            pass "ptype d (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype d"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype d (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype d"
+	}
+	timeout {
+	    fail "ptype d (timeout)"
+	}
+    }
+
+    send_gdb "ptype e\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype e"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype e (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype e"
+	}
+	timeout {
+	    fail "ptype e (timeout)"
+	}
+    }
+
+    send_gdb "ptype v\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype v"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype v (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype v"
+	}
+	timeout {
+	    fail "ptype v (timeout)"
+	}
+    }
+
+    send_gdb "ptype vb\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype vb"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\}\r\n$gdb_prompt $" {
+	    pass "ptype vb (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype vb"
+	}
+	timeout {
+	    fail "ptype vb (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAa\n"
+    gdb_expect {
+        -re "type = class A : public virtual V \{\[\r\n\t \]+private:\[\r\n\t \]+int a;\[\r\n\t \]+public:\[\r\n\t \]+virtual int f\\(void\\);\[\r\n\t \]+\} \[*\]+\r\n$gdb_prompt $" {
+            pass "ptype pAa (aCC)"
+        }
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAa"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAa (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAa"
+	}
+	timeout {
+	    fail "ptype pAa (timeout)"
+	}
+    }
+
+    send_gdb "ptype pAe\n"
+    gdb_expect {
+        -re "type = class A : public virtual V \{\[\r\n\t \]+private:\[\r\n\t \]+int a;\[\r\n\t \]+public:\[\r\n\t \]+virtual int f\\(void\\);\[\r\n\t \]+\} \[*\]+\r\n$gdb_prompt $" {
+            pass "ptype pAe (aCC)"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:${ws}A & operator=\\(A const &\\);${ws}A\\(int, A const &\\);${ws}A\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAe"
+	}
+	-re "type = class A : public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}int a;${ws}public:((${ws}A & operator=\\(A const &\\);)|(${ws}A\\(int, A const &\\);)|(${ws}A\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pAe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pAe"
+	}
+	timeout {
+	    fail "ptype pAe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pBe\n"
+    gdb_expect {
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:${ws}B & operator=\\(B const &\\);${ws}B\\(int, B const &\\);${ws}B\\(int\\);${ws}virtual int f\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pBe"
+	}
+	-re "type = class B : public A \{${ws}private:${ws}int b;${ws}public:((${ws}B & operator=\\(B const &\\);)|(${ws}B\\(int, B const &\\);)|(${ws}B\\(int\\);)|(${ws}virtual int f\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pBe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pBe"
+	}
+	timeout {
+	    fail "ptype pBe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pDd\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\} \[*\]+\r\n$gdb_prompt $" {
+            pass "ptype pDd (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pDd"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pDd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pDd"
+	}
+	timeout {
+	    fail "ptype pDd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pDe\n"
+    gdb_expect {
+        -re "type = class D : public AD, public virtual V \{\[\r\n\t \]+public:\[\r\n\t \]+int d;\[\r\n\t \]+static void s\\(void\\);\[\r\n\t \]+virtual int vg\\(void\\);\[\r\n\t \]+virtual int vd\\(void\\);\[\r\n\t \]+int fd\\(void\\);\[\r\n\t \]+\} \[*\]+\r\n$gdb_prompt $" {
+            pass "ptype pDe (aCC)"
+        }
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;${ws}D & operator=\\(D const &\\);${ws}D\\(int, D const &\\);${ws}D\\(int\\);${ws}static void s\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vd\\(void\\);${ws}int fd\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pDe"
+	}
+	-re "type = class D : public AD, public virtual V \{${ws}private:${ws}V \[*\]+_vb.V;${ws}public:${ws}int d;((${ws}D & operator=\\(D const &\\);)|(${ws}D\\(int, D const &\\);)|(${ws}D\\(int\\);)|(${ws}static void s\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vd\\(void\\);)|(${ws}int fd\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pDe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pDe"
+	}
+	timeout {
+	    fail "ptype pDe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVa\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVa"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVa (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVa"
+	}
+	timeout {
+	    fail "ptype pVa (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVv\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVv"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVv (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVv"
+	}
+	timeout {
+	    fail "ptype pVv (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVe\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVe"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVe"
+	}
+	timeout {
+	    fail "ptype pVe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVd\n"
+    gdb_expect {
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;${ws}V & operator=\\(V const &\\);${ws}V\\(V const &\\);${ws}V\\(void\\);${ws}int f\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVd"
+	}
+	-re "type = class V : public VA, public VB \{${ws}public:${ws}int w;((${ws}V & operator=\\(V const &\\);)|(${ws}V\\(V const &\\);)|(${ws}V\\(void\\);)|(${ws}int f\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVd (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVd"
+	}
+	timeout {
+	    fail "ptype pVd (timeout)"
+	}
+    }
+
+    send_gdb "ptype pADe\n"
+    gdb_expect {
+	-re "type = class AD \{${ws}public:${ws}AD & operator=\\(AD const &\\);${ws}AD\\(AD const &\\);${ws}AD\\(void\\);${ws}virtual int vg\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pADe"
+	}
+	-re "type = class AD \{${ws}public:((${ws}AD & operator=\\(AD const &\\);)|(${ws}AD\\(AD const &\\);)|(${ws}AD\\(void\\);)|(${ws}virtual int vg\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pADe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pADe"
+	}
+	timeout {
+	    fail "ptype pADe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pEe\n"
+    gdb_expect {
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;${ws}E & operator=\\(E const &\\);${ws}E\\(int, E const &\\);${ws}E\\(int\\);${ws}virtual int f\\(void\\);${ws}virtual int vg\\(void\\);${ws}virtual int vv\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pEe"
+	}
+	-re "type = class E : public B, public virtual V, public D, public C \{${ws}public:${ws}int e;((${ws}E & operator=\\(E const &\\);)|(${ws}E\\(int, E const &\\);)|(${ws}E\\(int\\);)|(${ws}virtual int f\\(void\\);)|(${ws}virtual int vg\\(void\\);)|(${ws}virtual int vv\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pEe (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pEe"
+	}
+	timeout {
+	    fail "ptype pEe (timeout)"
+	}
+    }
+
+    send_gdb "ptype pVB\n"
+    gdb_expect {
+	-re "type = class VB \{${ws}public:${ws}int vb;${ws}VB & operator=\\(VB const &\\);${ws}VB\\(VB const &\\);${ws}VB\\(void\\);${ws}int fvb\\(void\\);${ws}virtual int vvb\\(void\\);${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVB"
+	}
+	-re "type = class VB \{${ws}public:${ws}int vb;((${ws}VB & operator=\\(VB const &\\);)|(${ws}VB\\(VB const &\\);)|(${ws}VB\\(void\\);)|(${ws}int fvb\\(void\\);)|(${ws}virtual int vvb\\(void\\);))*${ws}\} \[*\]+\r\n$gdb_prompt $" {
+	    pass "ptype pVB (obsolescent gcc or gdb)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "ptype pVB"
+	}
+	timeout {
+	    fail "ptype pVB (timeout)"
+	}
+    }
+}
+
+#
+#  Test calling of virtual functions.
+#
+
+proc test_virtual_calls {} {
+    global gdb_prompt
+    global GDB
+
+    if [target_info exists gdb,cannot_call_functions] {
+	setup_xfail "*-*-*" 2416
+	fail "This target can not call functions"
+	return 0
+    }
+
+    send_gdb "print pAe->f()\n"
+    gdb_expect {
+	-re ".* = 20\r\n$gdb_prompt $" { pass "print pAe->f()" }
+	-re "Cannot invoke functions on this machine.*$gdb_prompt $" {
+	    fail "print pAe->f() (cannot invoke functions, skipping virtual calls)"
+	    return 0
+	}
+	-re ".*Cannot access memory at address 0x8.*$gdb_prompt $" {
+	    fail "print pAe->f() \
+(known failure with gcc cygnus-2.4.5-930417, skipping virtual calls)"
+	    return 0
+	}
+	-re ".*$gdb_prompt $" { fail "print pAe->f()" }
+	timeout { fail "print pAe->f() (timeout)" }
+	eof { fail "print pAe->f() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pAa->f()\n"
+    gdb_expect {
+	-re ".* = 1\r\n$gdb_prompt $" { pass "print pAa->f()" }
+	-re ".*$gdb_prompt $" { fail "print pAa->f()" }
+	timeout { fail "print pAa->f() (timeout)" }
+	eof { fail "print pAa->f() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDe->vg()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 202\r\n$gdb_prompt $" { pass "print pDe->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pDe->vg()" }
+	timeout { fail "print pDe->vg() (timeout)" }
+	eof { fail "print pDe->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pADe->vg()\n"
+    gdb_expect {
+	-re ".* = 202\r\n$gdb_prompt $" { pass "print pADe->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pADe->vg()" }
+	timeout { fail "print pADe->vg() (timeout)" }
+	eof { fail "print pADe->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDd->vg()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 101\r\n$gdb_prompt $" { pass "print pDd->vg()" }
+	-re ".*$gdb_prompt $" { fail "print pDd->vg()" }
+	timeout { fail "print pDd->vg() (timeout)" }
+	eof { fail "print pDd->vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411\r\n$gdb_prompt $" { pass "print pEe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->vvb()" }
+	timeout { fail "print pEe->vvb() (timeout)" }
+	eof { fail "print pEe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pVB->vvb()\n"
+    gdb_expect {
+	-re ".* = 407\r\n$gdb_prompt $" { pass "print pVB->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pVB->vvb()" }
+	timeout { fail "print pVB->vvb() (timeout)" }
+	eof { fail "print pVB->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pBe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411\r\n$gdb_prompt $" { pass "print pBe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pBe->vvb()" }
+	timeout { fail "print pBe->vvb() (timeout)" }
+	eof { fail "print pBe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pDe->vvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 411\r\n$gdb_prompt $" { pass "print pDe->vvb()" }
+	-re ".*$gdb_prompt $" { fail "print pDe->vvb()" }
+	timeout { fail "print pDe->vvb() (timeout)" }
+	eof { fail "print pDe->vvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->vd()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 282\r\n$gdb_prompt $" { pass "print pEe->vd()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->vd()" }
+	timeout { fail "print pEe->vd() (timeout)" }
+	eof { fail "print pEe->vd() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->fvb()\n"
+#   setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 311\r\n$gdb_prompt $" { pass "print pEe->fvb()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->fvb()" }
+	timeout { fail "print pEe->fvb() (timeout)" }
+	eof { fail "print pEe->fvb() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+
+    send_gdb "print pEe->D::vg()\n"
+    setup_xfail "*-*-*"
+    gdb_expect {
+	-re ".* = 102\r\n$gdb_prompt $" { pass "print pEe->D::vg()" }
+	-re ".*$gdb_prompt $" { fail "print pEe->D::vg()" }
+	timeout { fail "print pEe->D::vg() (timeout)" }
+	eof { fail "print pEe->D::vg() ($GDB dumped core) (FIXME)" ; gdb_virtfunc_restart; return }
+    }
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+
+    set prms_id 0
+    set bug_id 0
+
+    gdb_start;
+    gdb_virtfunc_init;
+
+    # Get the debug format for the compiled test case.  If that
+    # format is DWARF 1 then just skip all the tests since none of
+    # them will pass.
+
+    if [ runto_main ] then {
+	get_debug_format
+	if [ setup_xfail_format "DWARF 1" ] then {
+	    fail "C++ tests skipped due to limited C++ support in DWARF 1 debug format"
+	    return
+	}
+	clear_xfail "*-*-*"
+    }
+
+    test_ptype_of_classes
+
+    if [ runto 'test_calls(void)' ] then {
+	test_virtual_calls
+    }
+}
+
+do_tests
diff --git a/gdb/testsuite/gdb.hp/watch-cmd.exp b/gdb/testsuite/gdb.hp/watch-cmd.exp
new file mode 100644
index 0000000..a7e3b5c
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/watch-cmd.exp
@@ -0,0 +1,165 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+#
+# test special commands
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "run-hp"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+
+}
+
+# are we on a target board
+if ![isnative] then {
+    return
+}
+
+if {![istarget "hppa*-*-hpux10.30"] && ![istarget "hppa*-*-hpux11.*"]} {
+    #setup_xfail "*-*.*"
+    return 0
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+gdb_exit
+gdb_start
+delete_breakpoints
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+
+
+proc watchpoint_command_test {} {
+    global gdb_prompt
+
+    if [target_info exists noargs] { 
+        verbose "Skipping watchpoint_command_test because of noargs."
+        return
+    }
+
+    if { ![runto factorial] } then { gdb_suppress_tests }
+    # Don't depend upon argument passing, since most simulators don't currently
+    # support it.  Bash value variable to be what we want.
+    gdb_test "p value=6" "" "set value to 6 in watchpoint_command_test"
+    delete_breakpoints
+
+    # Verify that we can create a watchpoint, and give it a commands
+    # list that continues the inferior.  We set the watchpoint on a
+    # local variable, too, so that it self-deletes when the watched
+    # data goes out of scope.
+    #
+    # What should happen is: Each time the watchpoint triggers, it
+    # continues the inferior.  Eventually, the watchpoint will self-
+    # delete, when the watched variable is out of scope.  But by that
+    # time, the inferior should have exited.  GDB shouldn't crash or
+    # anything untoward as a result of this.
+    #
+    send_gdb "watch local_var\n"
+    gdb_expect {
+      -re ".*\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $"\
+              { pass "watch local_var"
+                set wp_id $expect_out(1,string)
+                send_gdb "commands $wp_id\n"
+                gdb_expect {
+                  -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\
+                          { pass "begin commands on watch"}
+                  -re "$gdb_prompt $"\
+                          {fail "begin commands on watch"}
+                  timeout {fail "(timeout) begin commands on watch"}
+                }
+              }
+    -re "$gdb_prompt $"\
+              {fail "watch local_var"}
+      timeout {fail "(timeout) watch local_var"}
+    }
+#    set wp_id $expect_out(1,string)
+#    send_gdb "commands $wp_id\n"
+#    gdb_expect {
+#      -re "Type commands for when breakpoint $wp_id is hit, one per line.*>"\
+#              {pass "begin commands on watch"}
+#      -re "$gdb_prompt $"\
+#              {fail "begin commands on watch"}
+#      timeout {fail "(timeout) begin commands on watch"}
+#    }
+    send_gdb "print value\n"
+    gdb_expect {
+      -re ">"\
+              {pass "add print command to watch"}
+      -re "$gdb_prompt $"\
+              {fail "add print command to watch"}
+      timeout {fail "(timeout) add print command to watch"}
+    }
+    send_gdb "continue\n"
+    gdb_expect {
+      -re ">"\
+              {pass "add continue command to watch"}
+      -re "$gdb_prompt $"\
+              {fail "add continue command to watch"}
+      timeout {fail "(timeout) add continue command to watch"}
+    }
+    send_gdb "end\n"
+    gdb_expect {
+      -re "$gdb_prompt $"\
+              {pass "begin commands on watch"}
+      timeout {fail "(timeout) begin commands on watch"}
+    }
+    send_gdb "continue\n"
+    gdb_expect {
+      -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*in main.*$gdb_prompt $"\
+              {pass "continue with watch"}
+      -re "$gdb_prompt $"\
+              {fail "continue with watch"}
+      timeout {fail "(timeout) continue with watch"}
+    }
+    send_gdb "continue\n"
+    gdb_expect {
+      -re "Continuing.*$gdb_prompt $"\
+              {pass "continue until exit"}
+      -re "$gdb_prompt $"\
+              {fail "continue until exit"}
+      timeout {fail "(timeout) continue until exit"}
+    }
+}
+
+watchpoint_command_test
+
+
+
+
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.hp/watch-hp.c b/gdb/testsuite/gdb.hp/watch-hp.c
new file mode 100644
index 0000000..7336fe2
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/watch-hp.c
@@ -0,0 +1,166 @@
+#include <stdio.h>
+/*
+ *	Since using watchpoints can be very slow, we have to take some pains to
+ *	ensure that we don't run too long with them enabled or we run the risk
+ *	of having the test timeout.  To help avoid this, we insert some marker
+ *	functions in the execution stream so we can set breakpoints at known
+ *	locations, without worrying about invalidating line numbers by changing
+ *	this file.  We use null bodied functions are markers since gdb does
+ *	not support breakpoints at labeled text points at this time.
+ *
+ *	One place we need is a marker for when we start executing our tests
+ *	instructions rather than any process startup code, so we insert one
+ *	right after entering main().  Another is right before we finish, before
+ *	we start executing any process termination code.
+ *
+ *	Another problem we have to guard against, at least for the test
+ *	suite, is that we need to ensure that the line that causes the
+ *	watchpoint to be hit is still the current line when gdb notices
+ *	the hit.  Depending upon the specific code generated by the compiler,
+ *	the instruction after the one that triggers the hit may be part of
+ *	the same line or part of the next line.  Thus we ensure that there
+ *	are always some instructions to execute on the same line after the
+ *	code that should trigger the hit.
+ */
+
+int count = -1;
+int ival1 = -1;
+int ival2 = -1;
+int ival3 = -1;
+int ival4 = -1;
+int ival5 = -1;
+char buf[10];
+struct foo
+{
+  int val;
+};
+struct foo struct1, struct2, *ptr1, *ptr2;
+
+int doread = 0;
+
+void marker1 ()
+{
+}
+
+void marker2 ()
+{
+}
+
+void marker4 ()
+{
+}
+
+void marker5 ()
+{
+}
+
+void marker6 ()
+{
+}
+
+void recurser (x)
+  int  x;
+{
+  int  local_x;
+
+  if (x > 0)
+    recurser (x-1);
+  local_x = x;
+}
+
+void
+func2 ()
+{
+  int  local_a;
+  static int  static_b;
+
+  ival5++;
+  local_a = ival5;
+  static_b = local_a;
+}
+
+int
+func1 ()
+{
+  /* The point of this is that we will set a breakpoint at this call.
+
+     Then, if DECR_PC_AFTER_BREAK equals the size of a function call
+     instruction (true on a sun3 if this is gcc-compiled--FIXME we
+     should use asm() to make it work for any compiler, present or
+     future), then we will end up branching to the location just after
+     the breakpoint.  And we better not confuse that with hitting the
+     breakpoint.  */
+  func2 ();
+  return 73;
+}
+
+int main ()
+{
+  struct1.val = 1;
+  struct2.val = 2;
+  ptr1 = &struct1;
+  ptr2 = &struct2;
+  marker1 ();
+  func1 ();
+  for (count = 0; count < 4; count++) {
+    ival1 = count;
+    ival3 = count; ival4 = count;
+  }
+  ival1 = count; /* Outside loop */
+  ival2 = count;
+  ival3 = count; ival4 = count;
+  marker2 ();
+  if (doread)
+    {
+      static char msg[] = "type stuff for buf now:";
+      write (1, msg, sizeof (msg) - 1);
+      read (0, &buf[0], 5);
+    }
+  marker4 ();
+
+  /* We have a watchpoint on ptr1->val.  It should be triggered if
+     ptr1's value changes.  */
+  ptr1 = ptr2;
+
+  /* This should not trigger the watchpoint.  If it does, then we
+     used the wrong value chain to re-insert the watchpoints or we
+     are not evaluating the watchpoint expression correctly.  */
+  struct1.val = 5;
+  marker5 ();
+
+  /* We have a watchpoint on ptr1->val.  It should be triggered if
+     ptr1's value changes.  */
+  ptr1 = ptr2;
+
+  /* This should not trigger the watchpoint.  If it does, then we
+     used the wrong value chain to re-insert the watchpoints or we
+     are not evaluating the watchpoint expression correctly.  */
+  struct1.val = 5;
+  marker5 ();
+
+  /* We're going to watch locals of func2, to see that out-of-scope
+     watchpoints are detected and properly deleted.
+     */
+  marker6 ();
+
+  /* This invocation is used for watches of a single
+     local variable. */
+  func2 ();
+
+  /* This invocation is used for watches of an expression
+     involving a local variable. */
+  func2 ();
+
+  /* This invocation is used for watches of a static
+     (non-stack-based) local variable. */
+  func2 ();
+
+  /* This invocation is used for watches of a local variable
+     when recursion happens.
+     */
+  marker6 ();
+  recurser (2);
+
+  marker6 ();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.hp/watch-hp.exp b/gdb/testsuite/gdb.hp/watch-hp.exp
new file mode 100644
index 0000000..a1c3fc8
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/watch-hp.exp
@@ -0,0 +1,784 @@
+# Copyright (C) 1992, 1994, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "watch-hp"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+# Prepare for watchpoint tests by setting up two breakpoints and one
+# watchpoint.
+#
+# We use breakpoints at marker functions to get past all the startup code,
+# so we can get to the watchpoints in a reasonable amount of time from a
+# known starting point.
+#
+# For simplicity, so we always know how to reference specific breakpoints or
+# watchpoints by number, we expect a particular ordering and numbering of
+# each in the combined breakpoint/watchpoint table, as follows:
+#
+#	Number		What		Where
+#	1		Breakpoint	marker1()
+#	2		Breakpoint	marker2()
+#	3		Watchpoint	ival3
+
+proc initialize {} {
+    global gdb_prompt
+    global hex
+    global decimal
+    global srcfile
+
+    if [gdb_test "break marker1" "Breakpoint 1 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker1" ] { 
+      return 0; 
+    }
+
+
+    if [gdb_test "break marker2" "Breakpoint 2 at $hex: file .*$srcfile, line $decimal.*" "set breakpoint at marker2" ] { 
+      return 0; 
+    }
+
+
+    if [gdb_test "info break" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*" "info break in watchpoint.exp" ] { 
+      return 0; 
+    }
+
+# ??rehrauer: To fix DTS #CHFts23014, in which setting a watchpoint
+# before running can cause the inferior to croak on HP-UX 10.30 and
+# 11.0 for reasons as yet unknown, we've disabled the ability to set
+# watches without a running inferior.  Verify the restriction.
+#
+    send_gdb "watch ival3\n"
+    gdb_expect {
+        -re ".*can't do that without a running program; try \"break main\", \"run\" first.*$gdb_prompt $" {
+	    pass "set watchpoint on ival3"
+	}
+	-re ".*$gdb_prompt $" { fail "set watchpoint on ival3"  }
+	timeout { fail "set watchpoint on ival3 (timeout)"  }
+    }
+
+
+#    if [gdb_test "watch ival3" ".*\[Ww\]atchpoint 3: ival3" "set watchpoint on ival3" ] { 
+#      return 0; 
+#    }
+
+
+    # "info watch" is the same as "info break"
+
+#    if [gdb_test "info watch" "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3" "watchpoint found in watchpoint/breakpoint table" ] { 
+#      return 0; 
+#    }
+
+
+    # After installing the watchpoint, we disable it until we are ready
+    # to use it.  This allows the test program to run at full speed until
+    # we get to the first marker function.
+
+#    if [gdb_test "disable 3" "disable 3\[\r\n\]+" "disable watchpoint" ] { 
+#      return 0; 
+#    }
+
+
+    return 1
+}
+
+#
+# Test simple watchpoint.
+#
+
+proc test_simple_watchpoint {} {
+    global gdb_prompt
+    global hex
+    global decimal
+
+    # Ensure that the watchpoint is disabled when we startup.
+
+#    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_simple_watchpoint" ] { 
+#      return 0; 
+#    }
+
+
+    # Run until we get to the first marker function.
+
+    gdb_run_cmd
+    set timeout 600
+    gdb_expect {
+	-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
+	    pass "run to marker1 in test_simple_watchpoint"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run to marker1 in test_simple_watchpoint"
+	    return
+	}
+	timeout {
+	    fail "run to marker1 in test_simple_watchpoint (timeout)"
+	    return
+	}
+    }
+#************************
+
+# ??rehrauer: To fix DTS #CHFts23014, in which setting a watchpoint
+# before running can cause the inferior to croak on HP-UX 10.30 and
+# 11.0 for reasons as yet unknown, we've disabled the ability to set
+# watches without a running inferior.  The following testpoints used
+# to be in [initialize].
+#
+    send_gdb "watch ival3\n"
+    gdb_expect {
+	-re ".*\[Ww\]atchpoint 3: ival3\r\n$gdb_prompt $" { 
+	    pass "set watchpoint on ival3"
+	}
+	-re ".*$gdb_prompt $" { fail "set watchpoint on ival3"  }
+	timeout { fail "set watchpoint on ival3 (timeout)"  }
+    }
+
+    # "info watch" is the same as "info break"
+
+    send_gdb "info watch\n"
+    gdb_expect {
+	-re "1\[ \]*breakpoint.*marker1.*\r\n2\[ \]*breakpoint.*marker2.*\r\n3\[ \]*.*watchpoint.*ival3\r\n$gdb_prompt $" {
+	    pass "watchpoint found in watchpoint/breakpoint table"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "watchpoint found in watchpoint/breakpoint table" 
+	}
+	timeout {
+	   fail "watchpoint found in watchpoint/breakpoint table" 
+	}
+    }
+
+    # After installing the watchpoint, we disable it until we are ready
+    # to use it.  This allows the test program to run at full speed until
+    # we get to the first marker function.
+
+    send_gdb "disable 3\n"
+    gdb_expect {
+	-re "disable 3\[\r\n\]+$gdb_prompt $" { pass "disable watchpoint" }
+	-re ".*$gdb_prompt $" { fail "disable watchpoint"  }
+	timeout { fail "disable watchpoint (timeout)"  }
+    }
+#******
+    # After reaching the marker function, enable the watchpoint.
+
+    if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "enable watchpoint" ] { 
+      return ; 
+    }
+
+
+    gdb_test "break func1" "Breakpoint.*at.*"
+    gdb_test "set \$func1_breakpoint_number = \$bpnum" ""
+
+    gdb_test "continue" "Continuing.*Breakpoint \[0-9\]*, func1.*" \
+	"continue to breakpoint at func1"
+
+    # Continue until the first change, from -1 to 0
+
+    send_gdb "cont\n"
+    gdb_expect {
+	-re "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count; ival4 = count;.*$gdb_prompt $" {
+	    pass "watchpoint hit, first time"
+	}
+	-re "Continuing.*Breakpoint.*func1.*$gdb_prompt $" {
+	    setup_xfail "m68*-*-*" 2597
+	    fail "thought it hit breakpoint at func1 twice"
+	    gdb_test "delete \$func1_breakpoint_number" ""
+	    gdb_test "continue" "\
+Continuing.*\[Ww\]atchpoint.*ival3.*Old value = -1.*New value = 0.*ival3 = count;" \
+		"watchpoint hit, first time"
+	}
+	-re ".*$gdb_prompt $" { fail "watchpoint hit, first time" ; return }
+	timeout { fail "watchpoint hit, first time (timeout)" ; return }
+	eof { fail "watchpoint hit, first time (eof)" ; return }
+    }
+
+    gdb_test "delete \$func1_breakpoint_number" ""
+
+    # Continue until the next change, from 0 to 1.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit, second time"
+
+    # Continue until the next change, from 1 to 2.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 1.*New value = 2.*ival3 = count; ival4 = count;.*" "watchpoint hit, third time"
+    
+    # Continue until the next change, from 2 to 3.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 2.*New value = 3.*ival3 = count; ival4 = count;.*" "watchpoint hit, fourth time"
+
+    # Continue until the next change, from 3 to 4.
+    # Note that this one is outside the loop.
+
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 3.*New value = 4.*ival3 = count; ival4 = count;.*" "watchpoint hit, fifth time"
+
+    # Continue until we hit the finishing marker function.
+    # Make sure we hit no more watchpoints.
+
+    gdb_test "cont" "Continuing.*Breakpoint.*marker2 \(\).*" \
+	"continue to marker2"
+
+    # Disable the watchpoint so we run at full speed until we exit.
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "watchpoint disabled" ] { 
+      return ; 
+    }
+
+
+    # Run until process exits.
+
+    if [target_info exists gdb,noresults] { return }
+
+    gdb_test "cont" "Continuing.*Program exited normally.*" \
+	"continue to exit in test_simple_watchpoint"
+}
+
+# Test disabling watchpoints.
+
+proc test_disabling_watchpoints {} {
+    global gdb_prompt
+    global binfile
+    global srcfile
+    global decimal
+    global hex
+
+    # Ensure that the watchpoint is disabled when we startup.
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint in test_disabling_watchpoints" ] { 
+      return 0; 
+    }
+
+
+    # Run until we get to the first marker function.
+
+    gdb_run_cmd
+    set timeout 600
+    gdb_expect {
+	-re "Breakpoint 1, marker1 .*$gdb_prompt $" {
+	    pass "run to marker1 in test_disabling_watchpoints"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "run to marker1 in test_disabling_watchpoints"
+	    return
+	}
+	timeout {
+	    fail "run to marker1 in test_disabling_watchpoints (timeout)"
+	    return
+	}
+    }
+
+    # After reaching the marker function, enable the watchpoint.
+
+    if [gdb_test "enable 3" "^enable 3\[\r\n\]+" "watchpoint enabled" ] { 
+      return ; 
+    }
+
+
+    # Continue until the first change, from -1 to 0
+    # Don't check the old value, because on VxWorks the variable value
+    # will not have been reinitialized.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = .*New value = 0.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, first time"
+    
+    # Continue until the next change, from 0 to 1.
+    gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ival3.*Old value = 0.*New value = 1.*ival3 = count; ival4 = count;.*" "watchpoint hit in test_disabling_watchpoints, second time"
+    
+    # Disable the watchpoint but leave breakpoints
+
+    if [gdb_test "disable 3" "^disable 3\[\r\n\]+" "disable watchpoint #2 in test_disabling_watchpoints" ] { 
+      return 0; 
+    }
+
+
+    # Check watchpoint list, looking for the entry that confirms the
+    # watchpoint is disabled.
+    gdb_test "info watchpoints" "3\[ \]*.*watchpoint\[ \]*keep\[ \]*n\[ \]*ival3\r\n.*" "watchpoint disabled in table"
+
+    # Continue until we hit the finishing marker function.
+    # Make sure we hit no more watchpoints.
+    gdb_test "cont" "Continuing.*Breakpoint.*marker2 \\(\\).*" \
+	"disabled watchpoint skipped"
+    
+    if [target_info exists gdb,noresults] { return }
+
+    gdb_test "cont" "Continuing.*Program exited normally.*" \
+	"continue to exit in test_disabling_watchpoints"
+}
+
+# Test stepping and other mundane operations with watchpoints enabled
+proc test_stepping {} {
+    global gdb_prompt
+
+    if [runto marker1] then {
+	gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2"
+
+	# Well, let's not be too mundane.  It should be a *bit* of a challenge
+	gdb_test "break func2 if 0" "Breakpoint.*at.*"
+	gdb_test "p \$func2_breakpoint_number = \$bpnum" " = .*"
+
+	# The HPPA has a problem here if it's not using hardware watchpoints
+	if {[ istarget "hppa*-*-*" ] && ![ istarget "hppa*-*-*bsd*" ]} then {
+	    # Don't actually try doing the call, if we do we can't continue.
+	    setup_xfail "*-*-*"
+	    fail "calling function with watchpoint enabled"
+	} else {
+	    # The problem is that GDB confuses stepping through the call
+	    # dummy with hitting the breakpoint at the end of the call dummy.
+	    # Will be fixed once all architectures define 
+	    # CALL_DUMMY_BREAKPOINT_OFFSET.
+	    setup_xfail "*-*-*"
+	    # This doesn't occur if the call dummy starts with a call,
+	    # because we are out of the dummy by the first time the inferior
+	    # stops.
+	    clear_xfail "d10v*-*-*"
+	    clear_xfail "m68*-*-*"
+	    clear_xfail "i*86*-*-*"
+	    clear_xfail "vax-*-*"
+	    # The following architectures define CALL_DUMMY_BREAKPOINT_OFFSET.
+	    clear_xfail "alpha-*-*"
+	    clear_xfail "mips*-*-*"
+	    clear_xfail "sparc-*-*"
+	    clear_xfail "hppa*-*-*bsd*"
+	    # It works with the generic inferior function calling code too.
+	    clear_xfail "mn10200*-*-*"
+	    clear_xfail "mn10300*-*-*"
+	    gdb_test "p func1 ()" "= 73" \
+		"calling function with watchpoint enabled"
+	}
+
+	# 
+	# "finish" brings us back to main.
+	# On some targets (e.g. alpha) gdb will stop from the finish in midline
+	# of the marker1 call. This is due to register restoring code on
+	# the alpha and might be caused by stack adjustment instructions
+	# on other targets. In this case we will step once more.
+	#
+
+	send_gdb "finish\n"
+	gdb_expect {
+	    -re "Run.*exit from.*marker1.* at" { }
+	    default { fail "finish from marker1" ; return }
+	}
+
+	gdb_expect {
+	    -re "marker1 \\(\\);.*$gdb_prompt $" {
+		send_gdb "step\n"
+		exp_continue
+	    }
+	    -re "func1 \\(\\);.*$gdb_prompt $" {
+		pass "finish from marker1"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "finish from marker1"
+	    }
+	    default { fail "finish from marker1" ; return }
+	}
+
+	gdb_test "next" "for \\(count = 0.*" "next to `for' in watchpoint.exp"
+
+	# Now test that "until" works.  It's a bit tricky to test
+	# "until", because compilers don't always arrange the code
+	# exactly the same way, and we might get slightly different
+	# sequences of statements.  But the following should be true
+	# (if not it is a compiler or a debugger bug): The user who
+	# does "until" at every statement of a loop should end up
+	# stepping through the loop once, and the debugger should not
+	# stop for any of the remaining iterations.
+
+	gdb_test "until" "ival1 = count.*" "until to ival1 assignment"
+	gdb_test "until" "ival3 = count.*" "until to ival3 assignment"
+	send_gdb "until\n"
+	gdb_expect {
+	    -re "(for \\(count = 0|\}).*$gdb_prompt $" {
+		gdb_test "until" "ival1 = count; /. Outside loop ./" \
+		    "until out of loop"
+	    }
+	    -re "ival1 = count; /. Outside loop ./.*$gdb_prompt $" {
+		pass "until out of loop"
+	    }
+	    -re ".*$gdb_prompt $" {
+		fail "until out of loop"
+	    }
+	    default { fail "until out of loop" ; return }
+	}
+
+	gdb_test "step" "ival2 = count.*" "step to ival2 assignment"
+    }
+}
+
+# Test stepping and other mundane operations with watchpoints enabled
+proc test_watchpoint_triggered_in_syscall {} {
+    global gdb_prompt
+
+    if [target_info exists gdb,noinferiorio] {
+	verbose "Skipping test_watchpoint_triggered_in_syscall due to noinferiorio"
+	return
+    }
+    # Run until we get to the first marker function.
+    set x 0
+    set y 0
+    set testname "Watch buffer passed to read syscall"
+    if [runto marker2] then {
+	gdb_test "watch buf\[0\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[0\\\]"
+	gdb_test "watch buf\[1\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[1\\\]"
+	gdb_test "watch buf\[2\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[2\\\]"
+	gdb_test "watch buf\[3\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[3\\\]"
+	gdb_test "watch buf\[4\]" ".*\[Ww\]atchpoint \[0-9\]*: buf\\\[4\\\]"
+	gdb_test "break marker4" ".*Breakpoint.*"
+
+	gdb_test "set doread = 1" ""
+
+	# If we send_gdb "123\n" before gdb has switched the tty, then it goes
+	# to gdb, not the inferior, and we lose.  So that is why we have
+	# watchpoint.c prompt us, so we can wait for that prompt.
+	send_gdb "continue\n";
+	gdb_expect {
+	    -re "Continuing\\.\r\ntype stuff for buf now:" {
+		pass "continue to read"
+	    }
+	    default {
+		fail "continue to read";
+		return ;
+	    }
+	}
+
+	send_gdb "123\n"
+	gdb_expect {
+	    -re ".*\[Ww\]atchpoint.*buf\\\[0\\\].*Old value = 0.*New value = 49\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[1\\\].*Old value = 0.*New value = 50\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[2\\\].*Old value = 0.*New value = 51\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*\[Ww\]atchpoint.*buf\\\[3\\\].*Old value = 0.*New value = 10\[^\n\]*\n" { set x [expr $x+1] ; exp_continue }
+	    -re ".*$gdb_prompt $" { pass "sent 123" }
+	    timeout { fail "sent 123 (timeout)" }
+	}
+
+	# Examine the values in buf to see how many watchpoints we
+	# should have printed.
+	send_gdb "print buf\[0\]\n"
+	gdb_expect {
+	    -re ".*= 49.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[0\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[0\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[0\]"}
+	    default { fail "print buf\[0\]"}
+	}
+	send_gdb "print buf\[1\]\n"
+	gdb_expect {
+	    -re ".*= 50.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[1\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[1\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[1\]"}
+	    default { fail "print buf\[1\]"}
+	}
+	send_gdb "print buf\[2\]\n"
+	gdb_expect {
+	    -re ".*= 51.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[2\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[2\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[2\]"}
+	    default { fail "print buf\[2\]"}
+	}
+	send_gdb "print buf\[3\]\n"
+	gdb_expect {
+	    -re ".*= 10.*$gdb_prompt $" { set y [expr $y+1]; pass "print buf\[3\]"}
+	    -re ".*= 0.*$gdb_prompt $" { pass "print buf\[3\]"}
+	    -re ".*$gdb_prompt $" { fail "print buf\[3\]" }
+	    default { fail "print buf\[3\]" }
+	}
+
+	# Did we find what we were looking for?  If not, flunk it.
+	if [expr $x==$y] then { pass $testname } else { fail "$testname (only triggered $x watchpoints, expected $y)"}
+
+	# Continue until we hit the finishing marker function.
+	# Make sure we hit no more watchpoints.
+	gdb_test "cont" "Continuing.*Breakpoint.*marker4 \\(\\).*" \
+	    "continue to marker4"
+
+	# Disable everything so we can finish the program at full speed
+	gdb_test "disable" "" "disable in test_watchpoint_triggered_in_syscall"
+
+	if [target_info exists gdb,noresults] { return }
+
+	gdb_test "cont" "Continuing.*Program exited normally.*" \
+	    "continue to exit in test_watchpoint_triggered_in_syscall"
+    }
+}
+
+# Do a simple test of of watching through a pointer when the pointer
+# itself changes.  Should add some more complicated stuff here.
+
+proc test_complex_watchpoint {} {
+    global gdb_prompt
+
+    if [runto marker4] then {
+	gdb_test "watch ptr1->val" ".*\[Ww\]atchpoint \[0-9\]*: ptr1->val"
+	gdb_test "break marker5" ".*Breakpoint.*"
+
+	gdb_test "cont" "Continuing.*\[Ww\]atchpoint.*ptr1->val.*Old value = 1.*New value = 2.*" "Test complex watchpoint"
+
+	# Continue until we hit the marker5 function.
+	# Make sure we hit no more watchpoints.
+
+	gdb_test "cont" "Continuing.*Breakpoint.*marker5 \\(\\).*" \
+	    "did not trigger wrong watchpoint"
+#********************
+        # Test watches of things declared locally in a function.
+        # In particular, test that a watch of stack-based things
+        # is deleted when the stack-based things go out of scope.
+        #
+	gdb_test "disable" "" "disable in test_complex_watchpoint"
+        gdb_test "break marker6" ".*Breakpoint.*"
+        gdb_test "cont" "Continuing.*Breakpoint.*marker6 \\(\\).*" \
+            "continue to marker6"
+        gdb_test "break func2" ".*Breakpoint.*"
+        gdb_test "cont" "Continuing.*func2.*"
+
+        # Test a watch of a single stack-based variable, whose scope
+        # is the function we're now in.  This should auto-delete when
+        # execution exits the scope of the watchpoint.
+        #
+        gdb_test "watch local_a" ".*\[Ww\]atchpoint \[0-9\]*: local_a" "set local watch"
+        gdb_test "cont" "\[Ww\]atchpoint.*local_a.*" "trigger local watch"
+        gdb_test "cont" "Continuing.*Watchpoint .* deleted because the program has left the block in.*which its expression is valid.*" "self-delete local watch"
+
+	# after func2 returned, gdb stopped and deleted the watchpoint
+	# we're now in main, let's get to func2
+	gdb_test "cont" "Continuing.*func2.*"
+
+        # We should be in "func2" again now.  Test a watch of an
+        # expression which includes both a stack-based local and
+        # something whose scope is larger than this invocation
+        # of "func2".  This should also auto-delete.
+        #
+        gdb_test "watch local_a + ival5" ".*\[Ww\]atchpoint \[0-9\]*: local_a . ival5" \
+                 "set partially local watch"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_a . ival5.*" \
+                 "trigger1 partially local watch"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_a . ival5.*" \
+                 "trigger2 partially local watch"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .* deleted because the program has left the block in.*which its expression is valid.*" \
+                 "self-delete partially local watch"
+
+	# after func2 returned, gdb stopped and deleted the watchpoint
+	# we're now in main, let's get to func2
+	gdb_test "cont" "Continuing.*func2.*"
+
+        # We should be in "func2" again now.  Test a watch of a
+        # static (non-stack-based) local.  Since this has scope
+        # across any invocations of "func2", it should not auto-
+        # delete.
+        #
+        gdb_test "watch static_b" ".*\[Ww\]atchpoint \[0-9\]*: static_b" \
+                 "set static local watch"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: static_b.*" \
+                 "trigger static local watch"
+        gdb_test "cont" "Continuing.*marker6 \\(\\).*" \
+                 "continue after trigger static local watch"
+        gdb_test "info break" ".*watchpoint.*static_b.*" \
+                 "static local watch did not self-delete"
+
+        # We should be in "recurser" now.  Test a watch of a stack-
+        # based local.  Symbols mentioned in a watchpoint are bound
+        # at watchpoint-creation.  Thus, a watch of a stack-based
+        # local to a recursing function should be bound only to that
+        # one invocation, and should not trigger for other invocations.
+        #
+        gdb_test "tbreak recurser" ".*Breakpoint.*"
+        gdb_test "cont" "Continuing.*recurser.*"
+        gdb_test "watch local_x" ".*\[Ww\]atchpoint \[0-9\]*: local_x" \
+                 "set local watch in recursive call"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .*: local_x.*New value = 2.*" \
+                 "trigger local watch in recursive call"
+        gdb_test "cont" "Continuing.*\[Ww\]atchpoint .* deleted because the program has left the block in.*which its expression is valid.*" \
+                 "self-delete local watch in recursive call"
+
+
+
+
+#******************
+	# Disable everything so we can finish the program at full speed
+	gdb_test "disable" "" "disable in test_complex_watchpoint"
+
+	if [target_info exists gdb,noresults] { return }
+
+
+	gdb_test "cont" "Continuing.*Program exited normally.*" \
+	    "continue to exit in test_complex_watchpoint"
+    }
+}
+
+# Start with a fresh gdb.
+
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+set timeout 600	
+verbose "Timeout now 600 sec.\n"
+
+if [initialize] then {
+
+    test_simple_watchpoint
+
+    # The IDT/sim monitor only has 8 (!) open files, of which it uses
+    # 4 (!).  So we have to make sure one program exits before
+    # starting another one.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    test_disabling_watchpoints
+
+    # See above.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    if ![target_info exists gdb,cannot_call_functions] {
+	test_stepping
+
+	# See above.
+	if [istarget "mips-idt-*"] then {
+	    gdb_exit
+	    gdb_start
+	    gdb_reinitialize_dir $srcdir/$subdir
+	    gdb_load $binfile
+	    initialize
+	}
+    }
+
+    # Only enabled for some targets merely because it has not been tested 
+    # elsewhere.
+    # On sparc-sun-sunos4.1.3, GDB was running all the way to the marker4 
+    # breakpoint before stopping for the watchpoint.  I don't know why.
+    if {[istarget "hppa*-*-*"]} then {
+	test_watchpoint_triggered_in_syscall
+    }
+
+    # See above.
+    if [istarget "mips-idt-*"] then {
+	gdb_exit
+	gdb_start
+	gdb_reinitialize_dir $srcdir/$subdir
+	gdb_load $binfile
+	initialize
+    }
+
+    # Only enabled for some targets merely because it has not been tested 
+    # elsewhere.
+    if {[istarget "hppa*-*-*"] || \
+	    [istarget "sparc*-*-sunos*"] || \
+	    [istarget "m32r-*-*"]} then {
+	test_complex_watchpoint
+#***************
+    }
+
+    # Verify that a user can force GDB to use "slow" watchpoints.
+    # (This proves rather little on kernels that don't support
+    # fast watchpoints, but still...)
+    #
+    if ![runto_main] then { fail "watch tests suppressed" }
+
+    send_gdb "set can-use-hw-watchpoints 0\n"
+    gdb_expect {
+      -re "$gdb_prompt $"\
+              {pass "disable fast watches"}
+      timeout {fail "(timeout) disable fast watches"}
+    }
+    send_gdb "show can-use-hw-watchpoints\n"
+    gdb_expect {
+      -re "Debugger's willingness to use watchpoint hardware is 0.*$gdb_prompt $"\
+              {pass "show disable fast watches"}
+      -re "$gdb_prompt $"\
+              {fail "show disable fast watches"}
+      timeout {fail "(timeout) show disable fast watches"}
+    }
+    send_gdb "watch ival3 if  count > 1\n"
+    gdb_expect {
+      -re "Watchpoint \[0-9\]*: ival3.*$gdb_prompt $"\
+              {pass "set slow conditional watch"}
+      -re "$gdb_prompt $"\
+              {fail "set slow conditional watch"}
+      timeout {fail "(timeout) set slow conditional watch"}
+    }
+    send_gdb "continue\n"
+    gdb_expect {
+      -re "Watchpoint \[0-9\]*: ival3.*Old value = 1.*New value = 2.*$gdb_prompt $"\
+              {pass "trigger slow conditional watch"}
+      -re "$gdb_prompt $"\
+              {fail "trigger slow conditional watch"}
+      timeout {fail "(timeout) trigger slow conditional watch"}
+    }
+
+    # We've explicitly disabled hardware watches.  Verify that GDB
+    # 
+    #
+    send_gdb "rwatch ival3\n"
+    gdb_expect {
+      -re "Expression cannot be implemented with read/access watchpoint..*$gdb_prompt $"\
+              {pass "rwatch disallowed when can-set-hw-watchpoints cleared"}
+      -re "$gdb_prompt $"\
+              {fail "rwatch disallowed when can-set-hw-watchpoints cleared"}
+      timeout {fail "(timeout) rwatch disallowed when can-use-hw-watchpoints cleared"}
+    }
+
+    # Read- and access watchpoints are unsupported on HP-UX.  Verify
+    # that GDB gracefully responds to requests to create them.
+    #
+    if [istarget "hppa*-*-hpux*"] then {
+      send_gdb "set can-use-hw-watchpoints 1\n"
+      gdb_expect {
+        -re "$gdb_prompt $"\
+                {pass "enable fast watches"}
+        timeout {fail "(timeout) enable fast watches"}
+      }
+      send_gdb "rwatch ival3\n"
+      gdb_expect {
+        -re "Target does not have this type of hardware watchpoint support.*$gdb_prompt $"\
+                {pass "read watches disallowed"}
+        -re "$gdb_prompt $"\
+                {fail "read watches disallowed"}
+        timeout {fail "(timeout) read watches disallowed"}
+      }
+
+      send_gdb "awatch ival3\n"
+      gdb_expect {
+        -re "Target does not have this type of hardware watchpoint support.*$gdb_prompt $"\
+                {pass "access watches disallowed"}
+        -re "$gdb_prompt $"\
+                {fail "access watches disallowed"}
+        timeout {fail "(timeout) access watches disallowed"}
+      }
+
+#***************
+    }
+}
diff --git a/gdb/testsuite/gdb.hp/xdb.c b/gdb/testsuite/gdb.hp/xdb.c
new file mode 100644
index 0000000..e3e3fc2
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb.c
@@ -0,0 +1,20 @@
+#include <stdio.h>
+
+int callee( x )
+int x;
+{
+    int y = x * x;
+    return (y - 2);
+}
+
+main()
+{
+    int i;
+    for (i = 1; i < 10; i++)
+        {
+            printf( "%d ", callee( i ));
+            
+        }
+    printf( " Goodbye!\n" );
+    
+}
diff --git a/gdb/testsuite/gdb.hp/xdb0.c b/gdb/testsuite/gdb.hp/xdb0.c
new file mode 100644
index 0000000..fa5c76f
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb0.c
@@ -0,0 +1,42 @@
+#include "xdb0.h"
+
+main ()
+{
+    int x;
+#ifdef usestubs
+    set_debug_traps();
+    breakpoint();
+#endif
+    x = 0;
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+    foo (x++);
+}
+
+static void
+unused ()
+{
+    /* Not used for anything */
+}
diff --git a/gdb/testsuite/gdb.hp/xdb0.h b/gdb/testsuite/gdb.hp/xdb0.h
new file mode 100644
index 0000000..c4d337c
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb0.h
@@ -0,0 +1,36 @@
+/* An include file that actually causes code to be generated in the
+   including file.  This is known to cause problems on some systems. */
+
+static void
+foo (x)
+int x;
+{
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+    bar (x++);
+}
diff --git a/gdb/testsuite/gdb.hp/xdb1.c b/gdb/testsuite/gdb.hp/xdb1.c
new file mode 100644
index 0000000..51632b9
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb1.c
@@ -0,0 +1,33 @@
+void
+bar (x)
+int x;
+{
+    printf ("%d\n", x);
+
+    long_line ();
+}
+
+static void
+unused ()
+{
+    /* Not used for anything */
+}
+
+
+/* This routine has a very long line that will break searching in older
+   versions of GDB.  */
+
+long_line ()
+{
+  oof (67);
+
+  oof (6789);
+
+  oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*  5 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 10 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 15 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 20 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 25 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 30 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 35 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 40 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 45 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 50 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 55 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 60 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /* 65 */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (12); /*    */      oof (12);  oof (12);  oof (12);  oof (12);  oof (12);  oof (1234); /* 70 */
+}
+
+oof (n)
+     int n;
+{
+  return n + 1;
+}
diff --git a/gdb/testsuite/gdb.hp/xdb1.exp b/gdb/testsuite/gdb.hp/xdb1.exp
new file mode 100644
index 0000000..88ab2fc
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb1.exp
@@ -0,0 +1,77 @@
+# Copyright (C) 1992, 1994, 1995 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+
+global usestubs
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "xdb"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+global GDBFLAGS
+set saved_gdbflags $GDBFLAGS
+
+set GDBFLAGS "$GDBFLAGS --xdb"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set pagination off" ""
+gdb_test "show pagination" "State of pagination is off."
+gdb_test "set pagination on" ""
+gdb_test "show pagination" "State of pagination is on."
+
+gdb_test "txbreak callee" "Breakpoint.*at.*"
+gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*del.*y.*"
+
+gdb_test "xbreak callee" "Breakpoint.*at.*.*"
+gdb_test "info break" "Num.*Type.*Disp.*Enb.*Address.*What\r\n.*breakpoint.*keep.*y.*"
+
+gdb_exit
+set GDBFLAGS $saved_gdbflags
+return 0
+
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.hp/xdb2.exp b/gdb/testsuite/gdb.hp/xdb2.exp
new file mode 100644
index 0000000..4cc7b34
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb2.exp
@@ -0,0 +1,104 @@
+# Copyright (C) 1992, 1994, 1995 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+        strace $tracelevel
+        }
+
+global message
+
+#
+# test running programs
+#
+set prms_id 0
+set bug_id 0
+
+set testfile "xdb"
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/xdb0.c" "${binfile}0.o" object {debug}] != "" } {
+    perror "Couldn't compile ${testfile}0.c to object"
+    return -1
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/xdb1.c" "${binfile}1.o" object {debug}] != "" } {
+    perror "Couldn't compile ${testfile}1.c to object"
+    return -1
+}
+
+if  { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
+    perror "Couldn't link ${testfile}."
+    return -1
+}
+
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+global GDBFLAGS
+set saved_gdbflags $GDBFLAGS
+set GDBFLAGS "$GDBFLAGS --xdb"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+gdb_test "break main" ""
+gdb_test "run" ""
+gdb_test "go +2" "Breakpoint.*at.*file.*xdb0\.c, line 12\.\r\nContinuing at.*\r\nmain \\(\\) at.*xdb0\.c:12\r\n12\[ \t\]+foo \\(x\\+\\+\\);"
+gdb_test "go -2" "Note: breakpoint.*also set at pc.*\.\r\nBreakpoint.*at.*file.*xdb0\.c, line 10\.\r\nContinuing at.*\.\r\n\r\nBreakpoint.*, main \\(\\) at.*xdb0\.c:10.*"
+gdb_test "go 16" "Breakpoint.*at.*file.*xdb0\.c, line 16\.\r\nContinuing at.*\.\r\nmain \\(\\) at.*xdb0\.c:16\r\n16\[ \t\]+foo \\(x\\+\\+\\);"
+
+send_gdb "go bar\n"
+  gdb_expect {
+      -re ".*Line 5 is not in .main..  Jump anyway.*y or n. $" {
+          send_gdb "y\n"
+          gdb_expect {
+            -re "$gdb_prompt $"\
+                    {pass "go bar"}
+            timeout {fail "(timeout) go bar"}
+          }
+      }
+      -re "Continuing at.*\.\r\nbar \\(x=0\\) at.*xdb1\.c:5" {}
+      timeout { perror "(timeout) go bar" ; return }
+  }
+
+# Verify that GDB responds gracefully to a "go" command without
+# an argument.
+#
+gdb_test "go" "Usage: go <location>"
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "break bar" ""
+gdb_test "run" ""
+gdb_test "backtrace full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n.2.* in main \\(\\) at.*xdb0\.c:11\r\n.*x = 1"
+gdb_test "bt 1 full" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)"
+gdb_test "bt full 2" ".*bar \\(x=0\\) at.*xdb1\.c:5\r\nNo locals\.\r\n.1.* in foo \\(x=1\\) at.*xdb0\.h:8\r\nNo locals\.\r\n\\(More stack frames follow\.\.\.\\)"
+
+set GDBFLAGS $saved_gdbflags
+return 0
diff --git a/gdb/testsuite/gdb.hp/xdb3.exp b/gdb/testsuite/gdb.hp/xdb3.exp
new file mode 100644
index 0000000..cf569e9
--- /dev/null
+++ b/gdb/testsuite/gdb.hp/xdb3.exp
@@ -0,0 +1,307 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+if $tracelevel then {
+        strace $tracelevel
+}
+
+
+set testfile1 "average"
+set testfile2 "sum"
+set testfile "xdb-test"
+set binfile1 ${objdir}/${subdir}/${testfile1}
+set binfile2 ${objdir}/${subdir}/${testfile2}
+set binfile ${objdir}/${subdir}/${testfile}
+
+if  { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if  { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+if [get_compiler_info ${binfile}] {
+    return -1;
+}
+if {[skip_hp_tests $gcc_compiled]} then { continue }
+
+
+proc xdb_reinitialize_dir { subdir } {
+    global gdb_prompt
+
+   send_gdb "D\n"
+    gdb_expect {
+        -re "Reinitialize source path to empty.*y or n. " {
+            send_gdb "y\n"
+            gdb_expect {
+                -re "Source directories searched.*$gdb_prompt $" {
+                    send_gdb "D $subdir\n"
+                    gdb_expect {
+                        -re "Source directories searched.*$gdb_prompt $" {
+                            verbose "Dir set to $subdir"
+                        }
+                        -re ".*$gdb_prompt $" {
+                            perror "Dir \"$subdir\" failed."
+                        }
+                    }
+                }
+                -re ".*$gdb_prompt $" {
+                    perror "Dir \"$subdir\" failed."
+                }
+            }
+        }
+        -re ".*$gdb_prompt $" {
+            perror "Dir \"$subdir\" failed."
+        }
+    }
+}
+
+#
+#test_search
+#
+proc test_search { } {
+    gdb_test "set listsize 4" ""
+    gdb_test "list average.c:1" "1\[ \t\]+/. This is a sample .*"
+    gdb_test "/ print_average" "10\[ \t\]+void print_average\\(int list.*"
+    gdb_test "/ print_average" "12\[ \t\]+void print_average\\(list, low, high\\)"
+    gdb_test "/ print_average" "35\[ \t\]+print_average \\(my_list, first, last\\);"
+    gdb_test "? print_average" "12\[ \t\]+void print_average\\(list, low, high\\)"
+    gdb_test "? sum" "Expression not found"
+}
+
+#
+#test_viewing_loc
+#
+proc test_viewing_loc { } {
+    gdb_test "L" "No stack."
+    gdb_test "break main" ""
+    gdb_test "R" ""
+    gdb_test "L" "#0\[ \t\]+main \\(\\) at.*average.c:31\r\n31\[ \t\]+int first = 0;"
+}
+
+#
+#test_dir_list
+#
+proc test_dir_list { } {
+    gdb_test "ld" "Source directories searched: .*"
+}
+
+#
+#test_list_sources
+#
+proc test_list_sources { } {
+    gdb_test "lf" "Source files for which symbols have been read in:.*average\\.c,.*Source files for which symbols will be read in on demand:.*sum\\.c"
+}
+
+#
+#test_vlist
+#
+proc test_vlist { } {
+    gdb_test "v main" "27\[ \t\]+main \\(\\)\r\n28\[ \t\]+#endif\r\n29\[ \t\]+.\r\n30\[ \t\]+char c;"
+}
+
+#
+#test_va
+#
+proc test_va { } {
+    gdb_test "va main" "Dump of assembler code for function main:.*End of assembler dump\."
+}
+
+#
+#test_list_globals
+#
+proc test_list_globals { } {
+    gdb_test "lg" "All defined variables:\r\n\r\nFile globals:.*"
+#    gdb_test "lg" "All defined variables:\r\n\r\nFile globals:\r\nchar __buffer.512.;\r\nint __d_eh_catch_catch;\r\nint __d_eh_catch_throw;.*"
+}
+
+#
+#test_list_registers
+#
+proc test_list_registers { } {
+    gdb_test "lr" "\[ \t\]+flags:.*r18:.*pcsqt:.*ccr:.*\r\n\[ \t\]+r1:.*r19:.*eiem:.*cr12:.*"
+    gdb_test "lr r1" "r1 .*"
+}
+
+#
+#test_backtrace
+#
+proc test_backtrace { } {
+    gdb_test "t" "#0  main \\(\\) at.*average.c:31"
+    gdb_test "T" "#0  main \\(\\) at.*average.c:31\r\n\[ \t\]+c = 0.*\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 0"
+
+    gdb_test "break sum" ""
+    gdb_test "cont" ""
+
+    gdb_test "t" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:11\r\n#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:17\r\n#2  0x.* in main \\(\\) at.*average\.c:35"
+    gdb_test "t 1" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:11\r\n\\(More stack frames follow\.\.\.\\)"
+    gdb_test "T" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:11\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:17\r\n\[ \t\]+total = 0\r\n\[ \t\]+num_elements = 0\r\n\[ \t\]+average = 0\r\n#2  0x.* in main \\(\\) at.*average\.c:35\r\n\[ \t\]+c = 0 '.000'\r\n\[ \t\]+first = 0\r\n\[ \t\]+last = 9"
+    gdb_test "T 1" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:11\r\n\[ \t\]+i = 0\r\n\[ \t\]+s = 0\r\n\\(More stack frames follow\.\.\.\\)"
+
+    gdb_test "V" "#0  sum \\(list=0x.*, low=0, high=9\\) at.*sum\.c:11\r\n\\11\[ \t\]+int i, s = 0;"
+    gdb_test "V 1" "#1  0x.* in print_average \\(list=0x.*, low=0, high=9\\) at.*average\.c:17\r\n17\[ \t\]+total = sum\\(list, low, high\\);"
+}
+
+#
+# test_go
+#
+proc test_go { }  {
+    gdb_test "break main" ""
+    gdb_test "R" ""
+
+    gdb_test "g +1" "Breakpoint.*at 0x.*: file.*average\.c, line 32\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:32\r\n32\[ \t\]+int last = num-1;"
+    gdb_test "g 35" "Breakpoint.*at 0x.*: file.*average\.c, line 35\.\r\nContinuing at 0x.*\.\r\nmain \\(\\) at.*average\.c:35\r\n35\[ \t\]+print_average \\(my_list, first, last\\);"
+
+}
+
+#
+#test_breakpoints
+#
+proc test_breakpoints { } {
+    global gdb_prompt
+
+    gdb_test "sb" ""
+    gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep n.*in main at.*average\.c:31.*"
+    gdb_test "ab" ""
+    gdb_test "lb" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:31.*"
+    gdb_test "ba sum" "Breakpoint.*at.*: file.*sum\.c, line 11\."
+    gdb_test "cont" ""
+    gdb_test "bx" "Breakpoint.*at.*: file.*sum.c, line 15\."
+    gdb_test "bx if (1)" "Breakpoint.*at.*: file.*sum.c, line 15\."
+    gdb_test "bx 1" "Breakpoint.*at.*: file.*average.c, line 22\."
+    gdb_test "bx 1 if (1)" "Breakpoint.*at.*: file.*average.c, line 22\."
+    gdb_test "bc 1 2" "Will ignore next 2 crossings of breakpoint 1\."
+    gdb_test "lb 1" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:31\r\n.*breakpoint already hit 1 time\r\n.*ignore next 2 hits.*"
+
+    send_gdb "db\n"
+    gdb_expect {
+        -re "Delete all breakpoints.*y or n. $" {
+            send_gdb "y\n"
+            exp_continue
+        }
+        -re "y\r\n$gdb_prompt $" {}
+        -re ".*$gdb_prompt $" { # This happens if there were no breakpoints
+            }
+        timeout { perror "Delete all breakpoints (timeout)" ; return }
+    }
+    send_gdb "lb\n"
+    gdb_expect {
+        -re "No breakpoints or watchpoints..*$gdb_prompt $" {}
+        -re ".*$gdb_prompt $" { perror "breakpoints not deleted" ; return }
+        timeout { perror "info breakpoints (timeout)" ; return }
+    }
+gdb_test "xbreak" "Breakpoint.*at.*file.*sum.c, line 15."
+gdb_test "xbreak print_average" "Breakpoint.*at.*file.*average.c, line 22."
+gdb_test "xbreak if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*sum.c, line 15."
+gdb_test "xbreak print_average if (1)" "Note: breakpoint.*also set at pc.*Breakpoint.*at.*file.*average.c, line 22."
+
+    send_gdb "lb\n"
+    gdb_expect {
+        -re "Num Type           Disp Enb Address    What.*breakpoint     keep y.*in sum at.*sum.c:15.*breakpoint     keep y.*in print_average at.*average.c:22.*breakpoint     keep y.*in sum at.*sum.c:15.*stop only if 1.*breakpoint     keep y.*in print_average at.*average.c:22.*stop only if 1.*$gdb_prompt $" {pass "lb on xbreaks"}
+        -re ".*$gdb_prompt $" { fail "breakpoints not deleted"}
+        timeout { fail "info breakpoints (timeout)" }
+    }
+
+}
+
+#
+# test_signals 
+#
+proc test_signals { } {
+    gdb_test "handle SIGTERM nostop noprint" ""
+    gdb_test "z SIGTERM s" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*Yes.*Yes.*Yes.*Terminated"
+    gdb_test "z SIGTERM r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*Yes.*Terminated"
+    gdb_test "z SIGTERM i" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated"
+    gdb_test "z SIGTERM r" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*Yes.*No.*Terminated"
+    gdb_test "z SIGTERM Q" "Signal.*Stop.*Print.*Pass to program.*Description\r\nSIGTERM.*No.*No.*No.*Terminated"
+    gdb_test "lz" "Signal.*Stop.*Print.*Pass to program.*Description\r\n\r\nSIGHUP.*Yes.*"
+}
+
+
+
+# Start with a fresh gdb.
+global GDBFLAGS
+set saved_gdbflags $GDBFLAGS
+
+set GDBFLAGS "$GDBFLAGS --xdb"
+
+gdb_exit
+gdb_start
+
+xdb_reinitialize_dir $srcdir/$subdir
+
+gdb_load ${binfile}
+send_gdb "set width 0\n"
+gdb_expect -re "$gdb_prompt $"
+test_search
+test_viewing_loc
+test_dir_list
+test_list_sources
+test_vlist
+test_va
+gdb_test "l" "No arguments.\r\nc = 0.*\r\nfirst = 0\r\nlast = 0"
+#test_list_globals
+test_list_registers
+test_backtrace
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+xdb_reinitialize_dir $srcdir/$subdir
+
+gdb_load ${binfile}
+send_gdb "set width 0\n"
+gdb_expect -re "$gdb_prompt $"
+test_go
+
+
+gdb_exit
+gdb_start
+xdb_reinitialize_dir $srcdir/$subdir
+
+gdb_load ${binfile}
+send_gdb "set width 0\n"
+gdb_expect -re "$gdb_prompt $"
+gdb_test "break main" ""
+gdb_test "R" ""
+gdb_test "S" "32\[ \t\]+int last = num-1;"
+test_breakpoints
+test_signals
+gdb_test "sm" ""
+gdb_test "info set" ".*pagination:  State of pagination is off.*"
+gdb_test "am" ""
+gdb_test "info set" ".*pagination:  State of pagination is on.*"
+gdb_exit
+
+set GDBFLAGS $saved_gdbflags
+
+return 0
+
+
+
+
+
+
diff --git a/gdb/testsuite/gdb.stabs/Makefile.in b/gdb/testsuite/gdb.stabs/Makefile.in
new file mode 100644
index 0000000..5bf35ea
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/Makefile.in
@@ -0,0 +1,16 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+all: 
+	@echo "Nothing to be done for all..."
+
+#### host, target, and site specific Makefile frags come in here.
+
+clean mostlyclean:
+	-rm -f *.o *~ core tmp.c tmp.s weird.s errs
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
diff --git a/gdb/testsuite/gdb.stabs/aout.sed b/gdb/testsuite/gdb.stabs/aout.sed
new file mode 100644
index 0000000..bbe38bc
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/aout.sed
@@ -0,0 +1,16 @@
+s/# Irix4 sed blows up if you have a sed command starting with "#"//
+s/# Avoid it by putting the comments within real sed commands.//
+s/# GDB legitimately expects a file name.//
+s/# The sun3 assembler bogusly requires that the value of this stab be a//
+s/# label.  Placate it.//
+1i\
+	.stabs "weird.c",0x64,0,0,Label0\
+Label0:
+s/N_LSYM/0x80/
+s/N_GSYM/0x20/
+s/# Replace a single backslash with a doubled backslash//
+/\.stabs/s/\\/\\\\/
+s/\.begin_common\(.*\)/.stabs \1,0xe2,0,0,0/
+s/\.end_common\(.*\)/.stabs \1,0xe4,0,0,0/
+s/\.align_it/.align 2/
+/^#/d
diff --git a/gdb/testsuite/gdb.stabs/configure b/gdb/testsuite/gdb.stabs/configure
new file mode 100755
index 0000000..698233d
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=weird.exp
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.stabs/configure.in b/gdb/testsuite/gdb.stabs/configure.in
new file mode 100644
index 0000000..aa49426
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/configure.in
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(weird.exp)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.stabs/ecoff.sed b/gdb/testsuite/gdb.stabs/ecoff.sed
new file mode 100644
index 0000000..3411c29
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/ecoff.sed
@@ -0,0 +1,17 @@
+# GDB legitimately expects a file name.
+1i\
+ .file	1 "weird.c"\
+\ #@stabs\
+\ #.stabs "weird.c",0x64,0,0,0
+/^#/d
+s/" *, */",/g
+s/\([0-9]\) *, */\1,/g
+s/  *$//
+s/N_LSYM/0x80/
+s/N_GSYM/0x20/
+s/\.begin_common\(.*\)/.stabs \1,0xe2,0,0,0/
+s/\.end_common\(.*\)/.stabs \1,0xe4,0,0,0/
+s/\.align_it/.align 2/
+/.if/d
+/.endif/d
+s/\.stabs/ #.stabs/
diff --git a/gdb/testsuite/gdb.stabs/hppa.sed b/gdb/testsuite/gdb.stabs/hppa.sed
new file mode 100644
index 0000000..5ca1a00
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/hppa.sed
@@ -0,0 +1,20 @@
+s/# Old OSF sed blows up if you have a sed command starting with "#"//
+s/# Avoid it by putting the comments within real sed commands.//
+s/# GDB legitimately expects a file name.//
+s/# The sun3 assembler bogusly requires that the value of this stab be a//
+s/# label.  Placate it.//
+1i\
+\	.stabs "weird.c",0x64,0,0,Label0\
+Label0:
+s/N_LSYM/0x80/
+s/N_GSYM/0x20/
+s/# Replace a single backslash with a doubled backslash//
+/\.stabs/s/\\/\\\\/
+s/# Only labels should be at the beginning of a line, assembler directives//
+s/# and instructions should start somewhere after column zero.//
+/^\./s/^\./	./
+s/\.begin_common\(.*\)/.stabs \1,0xe2,0,0,0/
+s/\.end_common\(.*\)/.stabs \1,0xe4,0,0,0/
+s/\.align_it/.align 4/
+s/\.globl/.export/
+/^#/d
diff --git a/gdb/testsuite/gdb.stabs/weird.def b/gdb/testsuite/gdb.stabs/weird.def
new file mode 100644
index 0000000..134e371
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/weird.def
@@ -0,0 +1,939 @@
+# We'll need an integer type.
+.stabs "inttype:t1=bu4;0;32;",N_LSYM,0,0,0
+
+# There are several kinds of tests in here.  We mix up the order to see
+# if we can test for poor handling of a stab affecting the next or previous
+# stab.
+
+# Try all possible symbol descriptors.  Note that GDB should merely
+# complain() even though these strings are totally bogus.  This allows
+# future compilers to define new syntaxes.
+.stabs "sym32:  !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+# Type descriptors.
+.stabs "type32:t32=  !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+# Note that a 'G', N_GSYM symbol needs no value.  The name of the stab
+# is used to look up a non-stab symbol with the same name.  On some
+# machines, the non-stab symbols will normally have underscores, but
+# if they lack the underscores, then GDB will simply put the symbol in
+# the minimal symbol table all the same.  So we can use them without
+# underscores and that way we don't need to worry about which machines
+# need underscores.
+
+# Type attributes.
+.stabs "attr104:G404=@h !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr105:G405=@i !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# A few real type attributes.
+# Alignment.
+.stabs "var0:G300=@a8;1",N_GSYM,0,0, 0
+.globl var0
+.data
+.align_it
+var0:
+.long 42
+
+.stabs "sym33:! !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym35:# !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym36:$ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym37:% !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym38:& !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym39:' !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym40:( !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym41:) !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym42:* !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym43:+ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym44:, !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym45:- !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.globl attr122
+.data
+.align_it
+attr122:
+.long 42
+.globl attr123
+.data
+.align_it
+attr123:
+.long 42
+.globl attr124
+.data
+.align_it
+attr124:
+.long 42
+
+.stabs "sym46:. !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym47:/ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym48:0 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym49:1 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym50:2 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "attr96:G396=@` !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr97:G397=@a !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr98:G398=@b !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr99:G399=@c !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "sym51:3 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym52:4 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym53:5 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym54:6 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym55:7 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym56:8 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym57:9 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym58:: !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym59:; !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym60:< !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym61:= !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym62:> !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym63:? !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym64:@ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym65:A !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym66:B !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym67:C !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym68:D !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym69:E !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym70:F !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym71:G !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym72:H !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym73:I !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym74:J !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym75:K !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym76:L !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym77:M !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym78:N !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym79:O !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym80:P !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym81:Q !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym82:R !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym83:S !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym84:T !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym85:U !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym86:V !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym87:W !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym88:X !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym89:Y !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym90:Z !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym91:[ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "sym93:] !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym94:^ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym95:_ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym96:` !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym97:a !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym98:b !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym99:c !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym100:d !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym101:e !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym102:f !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym103:g !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym104:h !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym105:i !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym106:j !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym107:k !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym108:l !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym109:m !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym110:n !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym111:o !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym112:p !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym113:q !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym114:r !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym115:s !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym116:t !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym117:u !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym118:v !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym119:w !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym120:x !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym121:y !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym122:z !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym123:{ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym124:| !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym125:} !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "sym126:~ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "type33:t33=! !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type35:t35=# !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type36:t36=$ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type37:t37=% !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type38:t38=& !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type39:t39=' !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type40:t40=( !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type41:t41=) !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type42:t42=* !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type43:t43=+ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type44:t44=, !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type45:t45=- !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type46:t46=. !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type47:t47=/ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type48:t48=0 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type49:t49=1 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type50:t50=2 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type51:t51=3 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type52:t52=4 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type53:t53=5 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type54:t54=6 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type55:t55=7 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type56:t56=8 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type57:t57=9 !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type58:t58=: !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type59:t59=; !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type60:t60=< !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type61:t61== !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type62:t62=> !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type63:t63=? !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type64:t64=@ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type65:t65=A !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type66:t66=B !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type67:t67=C !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.globl attr66
+.data
+.align_it
+attr66:
+.long 42
+.globl attr67
+.data
+.align_it
+attr67:
+.long 42
+.globl attr68
+.data
+.align_it
+attr68:
+.long 42
+.globl attr69
+.data
+.align_it
+attr69:
+.long 42
+
+.stabs "type68:t68=D !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type69:t69=E !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type70:t70=F !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type71:t71=G !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type72:t72=H !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type73:t73=I !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type74:t74=J !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type75:t75=K !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type76:t76=L !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type77:t77=M !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type78:t78=N !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type79:t79=O !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type80:t80=P !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type81:t81=Q !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type82:t82=R !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type83:t83=S !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type84:t84=T !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type85:t85=U !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type86:t86=V !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type87:t87=W !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "attr69:G369=@E !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr70:G370=@F !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr71:G371=@G !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "type88:t88=X !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type89:t89=Y !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type90:t90=Z !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type91:t91=[ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "type93:t93=] !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type94:t94=^ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type95:t95=_ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type96:t96=` !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type97:t97=a !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type98:t98=b !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type99:t99=c !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type100:t100=d !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type101:t101=e !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type102:t102=f !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type103:t103=g !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type104:t104=h !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type105:t105=i !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type106:t106=j !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type107:t107=k !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type108:t108=l !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type109:t109=m !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type110:t110=n !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type111:t111=o !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type112:t112=p !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type113:t113=q !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type114:t114=r !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type115:t115=s !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type116:t116=t !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type117:t117=u !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type118:t118=v !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type119:t119=w !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type120:t120=x !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type121:t121=y !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type122:t122=z !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type123:t123={ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type124:t124=| !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type125:t125=} !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type126:t126=~ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+
+.stabs "attr32:G332=@  !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr33:G333=@! !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr35:G334=@# !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "attr36:G335=@$ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "attr37:G337=@% !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# Test 'e' constant on non-enum type.  
+.stabs "const69:c=e1,69", N_LSYM,0,0, 0
+
+# Test constant with the type embedded.  
+.stabs "const70:c=e190=bs2;0;16;,70", N_LSYM,0,0, 0
+
+.stabs "attr38:G338=@& !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# Unrecognized negative type number.  
+.stabs "bad_neg0type:t201=s16field0:1,0,32;field2:-534,32,64;field3:-1,96,32;;", N_LSYM,0,0, 0
+
+.stabs "bad_neg0:G201", N_GSYM,0,0, 0
+
+.globl bad_neg0
+.data
+.align_it
+bad_neg0:
+.long 42
+     .long 43, 44, 45
+
+.stabs "attr39:G339=@' !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr41:G341=@) !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr42:G342=@* !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr43:G343=@+ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr44:G344=@, !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr46:G346=@. !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr47:G347=@/ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr58:G358=@: !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# Test two type attributes for one type.  
+.stabs "attr59:G359=@;@ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "attr60:G360=@< !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr61:G361=@= !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr62:G362=@> !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr63:G363=@? !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr64:G364=@@ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr65:G365=@A !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr66:G366=@B !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr67:G367=@C !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr68:G368=@D !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr72:G372=@H !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr73:G373=@I !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr74:G374=@J !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr75:G375=@K !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr76:G376=@L !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr77:G377=@M !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr78:G378=@N !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr79:G379=@O !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr80:G380=@P !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr81:G381=@Q !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr82:G382=@R !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr83:G383=@S !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr84:G384=@T !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr85:G385=@U !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr86:G386=@V !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr87:G387=@W !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr88:G388=@X !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr89:G389=@Y !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr90:G390=@Z !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr91:G391=@[ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+.stabs "attr93:G393=@] !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# Do with and without underscore, so this wins regardless of whether
+# names have underscores.
+
+.globl _common0
+.data
+.align_it
+_common0:
+.long 42
+     .long 24
+     .long 22
+.globl common0
+.data
+.align_it
+common0:
+.long 42
+     .long 24
+     .long 22
+.begin_common "common0"
+.stabs "common0var0:S1", N_GSYM,0,0, 0
+.stabs "common0var1:S1", N_GSYM,0,0, 4
+.stabs "common0var2:S1", N_GSYM,0,0, 8
+.end_common "common0"
+
+.stabs "attr94:G394=@^ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr95:G395=@_ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr100:G400=@d !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr101:G401=@e !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr102:G402=@f !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr103:G403=@g !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr106:G406=@j !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr107:G407=@k !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr108:G408=@l !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr109:G409=@m !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr110:G410=@n !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr111:G411=@o !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr112:G412=@p !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr113:G413=@q !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr114:G414=@r !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr115:G415=@s !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr116:G416=@t !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr117:G417=@u !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr118:G418=@v !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr119:G419=@w !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr120:G420=@x !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr121:G421=@y !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr122:G422=@z !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr123:G423=@{ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr124:G424=@| !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr125:G425=@} !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+.stabs "attr126:G426=@~ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
+
+# Define a variable for all the above stabs.  
+.globl attr32
+.data
+.align_it
+attr32:
+.long 42
+.globl attr33
+.data
+.align_it
+attr33:
+.long 42
+.globl attr35
+.data
+.align_it
+attr35:
+.long 42
+.globl attr36
+.data
+.align_it
+attr36:
+.long 42
+.globl attr37
+.data
+.align_it
+attr37:
+.long 42
+.globl attr38
+.data
+.align_it
+attr38:
+.long 42
+.globl attr39
+.data
+.align_it
+attr39:
+.long 42
+.globl attr41
+.data
+.align_it
+attr41:
+.long 42
+.globl attr42
+.data
+.align_it
+attr42:
+.long 42
+.globl attr43
+.data
+.align_it
+attr43:
+.long 42
+.globl attr44
+.data
+.align_it
+attr44:
+.long 42
+.globl attr46
+.data
+.align_it
+attr46:
+.long 42
+.globl attr47
+.data
+.align_it
+attr47:
+.long 42
+.globl attr58
+.data
+.align_it
+attr58:
+.long 42
+.globl attr59
+.data
+.align_it
+attr59:
+.long 42
+.globl attr60
+.data
+.align_it
+attr60:
+.long 42
+.globl attr61
+.data
+.align_it
+attr61:
+.long 42
+.globl attr62
+.data
+.align_it
+attr62:
+.long 42
+.globl attr63
+.data
+.align_it
+attr63:
+.long 42
+.globl attr64
+.data
+.align_it
+attr64:
+.long 42
+.globl attr65
+.data
+.align_it
+attr65:
+.long 42
+.globl attr70
+.data
+.align_it
+attr70:
+.long 42
+.globl attr71
+.data
+.align_it
+attr71:
+.long 42
+.globl attr72
+.data
+.align_it
+attr72:
+.long 42
+.globl attr73
+.data
+.align_it
+attr73:
+.long 42
+.globl attr74
+.data
+.align_it
+attr74:
+.long 42
+.globl attr75
+.data
+.align_it
+attr75:
+.long 42
+.globl attr76
+.data
+.align_it
+attr76:
+.long 42
+.globl attr77
+.data
+.align_it
+attr77:
+.long 42
+.globl attr78
+.data
+.align_it
+attr78:
+.long 42
+.globl attr79
+.data
+.align_it
+attr79:
+.long 42
+.globl attr80
+.data
+.align_it
+attr80:
+.long 42
+.globl attr81
+.data
+.align_it
+attr81:
+.long 42
+.globl attr82
+.data
+.align_it
+attr82:
+.long 42
+.globl attr83
+.data
+.align_it
+attr83:
+.long 42
+.globl attr84
+.data
+.align_it
+attr84:
+.long 42
+
+# Unrecognized floating point code.  
+.stabs "float72type:t202=R87;9;", N_LSYM,0,0, 0
+
+# 256-bit integer.  The point is obviously not that GDB should have a
+# special case for this size, but that an integer of any size should
+# work (at least for printing in hex, not necessarily for arithmetic.  
+.stabs "int256var:G203=bu32;0;256;", N_GSYM,0,0, 0
+# The value is palindromic, so it works whether words are big or little
+# endian.  
+.globl int256var
+.data
+.align_it
+     int256var:
+.long 42
+     .long 0x2b, 0x2c, 0x2d, 0x2d, 0x2c, 0x2b, 0x2a
+
+# Huge value in constant should at least get the type right.  
+
+# This value is just big enough not to fit in 32 bits.  
+.stabs "consth:c=e1,4294967296", N_LSYM,0,0, 0
+
+.stabs "consth2:c=e1,-734723985732642758928475678987234563284937456", N_LSYM,0,0, 0
+
+# Test a struct constant using S.  
+.stabs "bad_neg0const:c=S201,128,128,11222211343434345656565677888877", N_LSYM,0,0, 0
+
+# Bad filenumbers.  
+# This one is totally bogus.  
+.stabs "bad_type0:t(-3,7)", N_LSYM,0,0, 0
+# This one probably gets interpreted as a forward reference.  
+.stabs "bad_type1:t(42,6)", N_LSYM,0,0, 0
+
+# Arrays indexed by weird things.  
+.stabs "array_index0:t205=r1;0;5;", N_LSYM,0,0, 0
+.stabs "array0:G206=a205;1", N_GSYM,0,0, 0
+.globl array0
+.data
+.align_it
+     array0:
+.long 42
+     .long 43, 44, 45, 46, 47
+
+.stabs "array_index1:t207=", N_LSYM,0,0, 0
+.stabs "array1:G208=aeai1_red:0,ai1_green:1,ai1_blue:2,;;1", N_GSYM,0,0, 0
+.globl array1
+.data
+.align_it
+     array1:
+.long 42
+     .long 43, 44
+
+# See if GDB can deal with it if the compiler gets smarter about saying
+# which variables were defined with which types.  
+.stabs "inttype_one:t209=1", N_LSYM,0,0, 0
+.stabs "inttype_two:t210=1", N_LSYM,0,0, 0
+.stabs "one_var:G209", N_GSYM,0,0, 0
+.globl one_var
+.data
+.align_it
+one_var:
+.long 42
+.stabs "two_var:G210", N_GSYM,0,0, 0
+.globl two_var
+.data
+.align_it
+two_var:
+.long 42
+
+# And see if the caddr_t hack can deal with the same thing.
+.stabs "intp:t211=*1", N_LSYM,0,0, 0
+# If it weren't for this variable, we'd need to ignore the intp name.  
+.stabs "pointer_to_int_var:G212=*1", N_LSYM,0,0, 0
+.stabs "intp_var:G211", N_GSYM,0,0, 0
+.globl intp_var
+.data
+.align_it
+intp_var:
+.long 42
+
+# Unrecognized constant code.  
+.stabs "unrecog_const:c=xjksdflskd33,4;473;", N_LSYM,0,0, 0
+
+.globl attr85
+.data
+.align_it
+attr85:
+.long 42
+.globl attr86
+.data
+.align_it
+attr86:
+.long 42
+.globl attr87
+.data
+.align_it
+attr87:
+.long 42
+.globl attr88
+.data
+.align_it
+attr88:
+.long 42
+.globl attr89
+.data
+.align_it
+attr89:
+.long 42
+.globl attr90
+.data
+.align_it
+attr90:
+.long 42
+.globl attr91
+.data
+.align_it
+attr91:
+.long 42
+.globl attr92
+.data
+.align_it
+attr92:
+.long 42
+.globl attr93
+.data
+.align_it
+attr93:
+.long 42
+.globl attr94
+.data
+.align_it
+attr94:
+.long 42
+.globl attr95
+.data
+.align_it
+attr95:
+.long 42
+.globl attr96
+.data
+.align_it
+attr96:
+.long 42
+.globl attr97
+.data
+.align_it
+attr97:
+.long 42
+.globl attr98
+.data
+.align_it
+attr98:
+.long 42
+.globl attr99
+.data
+.align_it
+attr99:
+.long 42
+.globl attr100
+.data
+.align_it
+attr100:
+.long 42
+.globl attr101
+.data
+.align_it
+attr101:
+.long 42
+.globl attr102
+.data
+.align_it
+attr102:
+.long 42
+.globl attr103
+.data
+.align_it
+attr103:
+.long 42
+.globl attr104
+.data
+.align_it
+attr104:
+.long 42
+.globl attr105
+.data
+.align_it
+attr105:
+.long 42
+.globl attr106
+.data
+.align_it
+attr106:
+.long 42
+.globl attr107
+.data
+.align_it
+attr107:
+.long 42
+.globl attr108
+.data
+.align_it
+attr108:
+.long 42
+.globl attr109
+.data
+.align_it
+attr109:
+.long 42
+.globl attr110
+.data
+.align_it
+attr110:
+.long 42
+.globl attr111
+.data
+.align_it
+attr111:
+.long 42
+.globl attr112
+.data
+.align_it
+attr112:
+.long 42
+.globl attr113
+.data
+.align_it
+attr113:
+.long 42
+.globl attr114
+.data
+.align_it
+attr114:
+.long 42
+.globl attr115
+.data
+.align_it
+attr115:
+.long 42
+.globl attr116
+.data
+.align_it
+attr116:
+.long 42
+.globl attr117
+.data
+.align_it
+attr117:
+.long 42
+.globl attr118
+.data
+.align_it
+attr118:
+.long 42
+.globl attr119
+.data
+.align_it
+attr119:
+.long 42
+.globl attr120
+.data
+.align_it
+attr120:
+.long 42
+.globl attr121
+.data
+.align_it
+attr121:
+.long 42
+.globl attr125
+.data
+.align_it
+attr125:
+.long 42
+.globl attr126
+.data
+.align_it
+attr126:
+.long 42
+
+# Size.  
+.stabs "var1:G301=@s32;1",N_GSYM,0,0, 0
+.globl var1
+.data
+.align_it
+var1:
+.long 42
+# Pointer class.  
+.stabs "var2:G302=@p42;1",N_GSYM,0,0, 0
+.globl var2
+.data
+.align_it
+var2:
+.long 42
+# Packed type.  
+.stabs "var3:G303=@P;1",N_GSYM,0,0, 0
+.globl var3
+.data
+.align_it
+var3:
+.long 42
+
+# Manually hacked version of the following.  The manual hacking is to
+# remove the extra names (which GDB 4.9 bogusly relies on).
+
+# Virtual base classes in which there are no variables of the base
+# class types.
+
+# class only_one_instance {
+#  public:
+#   int x;
+# };
+
+# class inherit_path_a : public virtual only_one_instance {
+#   int a;
+# };
+
+# class inherit_path_b : public virtual only_one_instance {
+#   int b;
+# };
+
+# class combine_paths : public inherit_path_a, public inherit_path_b {
+#   int comb;
+# };
+
+# combine_paths v_comb;
+
+# These are the unhacked stabs I started with (only change has been to
+# convert them to weird.def format, and change the numbers to the 400
+# range.  
+
+# .stabs "only_one_instance:Tt444=s4x:1,0,32;;", N_LSYM,0,0, 0
+# .stabs "inherit_path_a:Tt445=s12!1,120,444;$vb444:446=*444,0;a:/01,32,32;;",
+#       N_LSYM,0,0, 0
+# .stabs "inherit_path_b:Tt447=s12!1,120,444;$vb444:446,0;b:/01,32,32;;", N_LSYM,0,0, 0
+# .stabs "combine_paths:Tt448=s24!2,020,445;0264,447;comb:/01,128,32;;", N_LSYM,0,0, 0
+# .stabs "v_comb:G448", N_GSYM,0,0, 0
+
+# Hacked version, without class names.
+
+.stabs "v_comb:G448=s24!2,020,445=s12!1,120,444=s4x:1,0,32;;;$vb444:446=@s32;*444,0;a:/01,32,32;;;0264,447=s12!1,120,444;$vb444:446,0;b:/01,32,32;;;comb:/01,128,32;;", N_GSYM,0,0, 0
+
+	.globl v_comb
+	.align 1
+v_comb:
+# virtual base class pointer for inherit_path_a 
+	.long v_comb_shared 
+# a 
+	.long 43 
+# virtual base class pointer for inherit_path_b 
+	.long v_comb_shared 
+# b 
+	.long 44 
+# comb 
+	.long 45 
+v_comb_shared:
+# x 
+	.long 42 
+
+.stabs "sym92:\ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "type92:t92=\ !#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~",N_LSYM,0,0,0
+.stabs "attr92:G392=@\ !#$%&'()*+,-./0123456789:<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_`abcdefghijklmnopqrstuvwxyz{|}~;1",N_GSYM,0,0, 0
diff --git a/gdb/testsuite/gdb.stabs/weird.exp b/gdb/testsuite/gdb.stabs/weird.exp
new file mode 100644
index 0000000..86ac7a6
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/weird.exp
@@ -0,0 +1,325 @@
+#   Copyright (C) 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# Test that GDB properly ignores invalid stabs.
+# Also test that GDB can debug a .o file, and that it doesn't mind
+# a file that's more minimal than what a compiler normally puts out.
+if $tracelevel then {
+	strace $tracelevel
+}
+
+# If the test directory was not created by configure then skip
+# this test.
+if ![file isdirectory ${objdir}/${subdir}] then {
+    return 0
+}
+
+set prms_id 0
+set bug_id 0
+
+proc do_tests {} {
+	global binfile
+	global gdb_prompt
+
+	# Mips/alpha targets that use gcc with mips-tfile put out the stabs
+	# assembler directives embedded in comments. If the assembler
+	# file is then processed with native cc, all stabs directives
+	# will be lost.
+	# Skip the rest of the stabs tests for this case.
+	send_gdb "ptype inttype\n"
+	gdb_expect {
+		-re "^ptype inttype\r*\ntype = inttype.*$gdb_prompt $" {
+			pass "stabs found"
+		}
+		-re ".*$gdb_prompt $" {
+			setup_xfail "mips-*-*"
+			setup_xfail "alpha-*-*"
+			fail "stabs not found"
+			return
+		}
+		default { fail "checking for stabs" }
+	}
+
+	print_weird_var var0
+	print_weird_var var1
+	print_weird_var var2
+	print_weird_var var3
+
+	print_weird_var attr32
+	print_weird_var attr33
+	print_weird_var attr35
+	print_weird_var attr36
+	print_weird_var attr37
+	print_weird_var attr38
+	print_weird_var attr39
+	print_weird_var attr41
+	print_weird_var attr42
+	print_weird_var attr43
+	print_weird_var attr44
+	print_weird_var attr46
+	print_weird_var attr47
+	print_weird_var attr58
+	print_weird_var attr59
+	print_weird_var attr60
+	print_weird_var attr61
+	print_weird_var attr62
+	print_weird_var attr63
+	print_weird_var attr64
+	print_weird_var attr65
+	print_weird_var attr66
+	print_weird_var attr67
+	print_weird_var attr68
+	print_weird_var attr69
+	print_weird_var attr70
+	print_weird_var attr71
+	print_weird_var attr72
+	print_weird_var attr73
+	print_weird_var attr74
+	print_weird_var attr75
+	print_weird_var attr76
+	print_weird_var attr77
+	print_weird_var attr78
+	print_weird_var attr79
+	print_weird_var attr80
+	print_weird_var attr81
+	print_weird_var attr82
+	print_weird_var attr83
+	print_weird_var attr84
+	print_weird_var attr85
+	print_weird_var attr86
+	print_weird_var attr87
+	print_weird_var attr88
+	print_weird_var attr89
+	print_weird_var attr90
+	print_weird_var attr91
+	print_weird_var attr92
+	print_weird_var attr93
+	print_weird_var attr94
+	print_weird_var attr95
+	print_weird_var attr96
+	print_weird_var attr97
+	print_weird_var attr98
+	print_weird_var attr99
+	print_weird_var attr100
+	print_weird_var attr101
+	print_weird_var attr102
+	print_weird_var attr103
+	print_weird_var attr104
+	print_weird_var attr105
+	print_weird_var attr106
+	print_weird_var attr107
+	print_weird_var attr108
+	print_weird_var attr109
+	print_weird_var attr110
+	print_weird_var attr111
+	print_weird_var attr112
+	print_weird_var attr113
+	print_weird_var attr114
+	print_weird_var attr115
+	print_weird_var attr116
+	print_weird_var attr117
+	print_weird_var attr118
+	print_weird_var attr119
+	print_weird_var attr120
+	print_weird_var attr121
+	print_weird_var attr122
+	print_weird_var attr123
+	print_weird_var attr124
+	print_weird_var attr125
+	print_weird_var attr126
+
+	gdb_test "p const69" " = 69" "'e' constant on non-enum type"
+	gdb_test "whatis const69" "type = (unsigned int|inttype)" "whatis const69"
+
+	gdb_test "p sizeof (const70)" " = 2" "'e' constant with embedded type"
+
+	gdb_test "p bad_neg0" " = \{field0 = 42, field2 =.*field3 = 45\}" "p bad_neg0"
+
+	gdb_test "ptype inttype" "type = (unsigned int|inttype)" "ptype on inttype"
+	gdb_test "p sizeof (float72type)" " = 9" "unrecognized floating point type"
+
+	# This big number needs to be kept as one piece
+	gdb_test "p/x int256var" " = 0x0*2a0000002b0000002c0000002d0000002d0000002c0000002b0000002a" "print very big integer"
+
+	gdb_test "whatis consth" "type = inttype" "whatis consth"
+	gdb_test "whatis consth2" "type = inttype" "whatis consth2"
+
+	# GDB does not yet understand S constants
+	setup_xfail "*-*-*"
+	gdb_test "p/x bad_neg0const" " = \{field0 = 0x11222211, field2 =.*\
+field3 = 0x77888877\}" "print struct constant"
+
+	gdb_test "ptype bad_type0" "type = .*" "print bad_type0"
+	gdb_test "ptype bad_type1" "type = .*" "print bad_type1"
+
+	# GDB does not yet support arrays indexed by anything at all unusual
+	setup_xfail "*-*-*"
+	gdb_test "p array0" " = \{42, 43, 44, 45, 46, 47\}" "array0 with strange index"
+	setup_xfail "*-*-*"
+	gdb_test "p array1" " = \{42, 43, 44\}" "array1 with strange index"
+
+	# GDB does not yet support this feature
+	gdb_test "whatis one_var" "type = inttype_one" \
+	    "whatis one_var (known failure in gdb 4.10)"
+	# But do make sure that it prints as something reasonable
+	gdb_test "whatis one_var" "type = inttype(|_one)" \
+	    "whatis one_var test 2"
+
+	gdb_test "whatis two_var" "type = inttype_two" \
+	    "whatis two_var (known failure in gdb 4.10)"
+	# But do make sure that it prints as something reasonable
+	gdb_test "whatis two_var" "type = inttype(|_two)" \
+	    "whatis two_var test 2"
+
+	setup_xfail "*-*-*"
+	gdb_test "whatis pointer_to_int_var" "type = int \[*\]"
+	setup_xfail "*-*-*"
+	gdb_test "whatis intp_var" "type = intp"
+
+	gdb_test "p common0var0" "= 42"
+	# GDB seems to only understand common blocks local to a function.
+	# These variables never get relocated to be relative to the common 
+	# block.
+	# I'm not sure whether it is valid to have a common block which
+	# is not local to a function.
+	setup_xfail "*-*-*"
+	gdb_test "p common0var1" "= 24"
+	setup_xfail "*-*-*"
+	gdb_test "p common0var2" "= 22"
+
+	# this long line must be continous, not with "/" escaping the newline
+	gdb_test "p v_comb" "{<> = {<> = {x = 42}, \[_a-zA-Z$.\]* = \[0-9xa-fA-F\]*, a = 43}, <> = {\[_a-zA-Z$.\]* = \[0-9xa-fA-F\]*, b = 44}, comb = 45}"
+}
+
+proc print_weird_var { var } {
+	global gdb_prompt
+
+	# Make sure that the variable gets printed out correctly, without
+	# any sort of warning message.
+	send_gdb "print $var\n"
+	gdb_expect {
+		-re "^print $var\r*\n.\[0-9\]* = 42.*$gdb_prompt $" {
+			pass "variable $var printed properly"
+		}
+		-re ".*$gdb_prompt $" {
+			fail "variable $var not printed properly"
+		}
+		timeout { fail "variable $var not printed (timeout)" }
+		eof { fail "(eof) variable $var not printed" }
+	}
+
+	# Make sure that the stabs did get loaded in a sensible way.
+	# If somehow the stabs got skipped, then the above test can
+	# pass because GDB assumes int for variables without a stab.
+
+	# This doesn't work because 32=45 doesn't preserve the name in
+	# gdb (as of 14 Sep 93 anyway).
+	#gdb_test "whatis $var" "type = (unsigned int|inttype)"
+
+	# But the size should be right.
+	gdb_test "print sizeof ($var)" "= 4"
+}
+
+
+# Don't use gdb_load; it doesn't bitch if the loading produced some
+# error messages during symbol reading.
+set testfile weird
+set srcfile ${objdir}/${subdir}/weird.s
+set binfile ${objdir}/${subdir}/weirdx.o
+
+global target_os
+set sedscript ${srcdir}/${subdir}/aout.sed
+switch -glob ${target_triplet} {
+    "hppa*-*-*" {
+	set sedscript ${srcdir}/${subdir}/hppa.sed
+    }
+    "mips-*-ecoff" {
+	set sedscript ${srcdir}/${subdir}/ecoff.sed
+    }
+    "powerpc-*-aix*" {
+	set sedscript ${srcdir}/${subdir}/xcoff.sed
+    }
+    "rs6000-*-aix*" {
+	set sedscript ${srcdir}/${subdir}/xcoff.sed
+    }
+    "*-*-aout" {
+	set sedscript ${srcdir}/${subdir}/aout.sed
+    }
+    "*-*-xcoff" {
+	set sedscript ${srcdir}/${subdir}/xcoff.sed
+    }
+    "alpha-*-*" {
+	set sedscript ${srcdir}/${subdir}/ecoff.sed
+    }
+}
+
+
+# Hope this is a Unix box.
+set exec_output [remote_exec build "sed" "-f ${sedscript}" "${srcdir}/${subdir}/weird.def" "${srcfile}"]
+if { [lindex $exec_output 0] != 0 } {
+    perror "Couldn't make test case. $exec_output"
+    return -1
+}
+
+if  { [gdb_compile "${srcfile}" "${binfile}" object ""] != "" } {
+     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+remote_file build delete ${srcfile}
+
+# Start with a fresh gdb
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+
+set binfile [remote_download host ${binfile} object.o]
+send_gdb "file $binfile\n"
+# If $binfile is very long, a \r (but not a \n) will echo in the
+# middle of the echo of the command.  So to match the echo, we
+# would like to match anything not containing \n
+# (we would prefer to be sure not to match any warning message).
+# But \[^\n\]* doesn't seem to work, so instead use the heuristic
+# that a filename won't contain a space and a warning message will.
+# But spaces following by backspaces aren't really spaces.
+gdb_expect 60 {
+    -re "^file (\[^ \]| +\008)*\r*\n" {
+	exp_continue
+    }
+    -re "A program is being debugged already.  Kill it\\? \\(y or n\\)" {
+	send_gdb "y\n"
+	exp_continue
+    }
+    -re "^Reading symbols from $binfile\\.\\.\\.done\.\r*\n$gdb_prompt $" {
+	pass "weirdx.o read without error"
+    }
+    -re ".*$gdb_prompt $" {
+	fail "Errors reading weirdx.o"
+    }
+    timeout {
+	perror "couldn't load $binfile into $GDB (timed out)."
+	return -1
+    }
+    eof { fail "(eof) cannot read weirdx.o" }
+}
+
+do_tests
+
+remote_file host delete ${binfile}
+
+return 0
diff --git a/gdb/testsuite/gdb.stabs/xcoff.sed b/gdb/testsuite/gdb.stabs/xcoff.sed
new file mode 100644
index 0000000..8a6b4ef
--- /dev/null
+++ b/gdb/testsuite/gdb.stabs/xcoff.sed
@@ -0,0 +1,17 @@
+# Put everything in this csect, which seems to make things work.
+# The compiler actually puts the stabs in .csect [PR], but that didn't
+# work here (I guess because there is no text section).
+1i\
+	.csect .data[RW]
+# .stabs string,type,0,0,value  ->  .stabx string,value,type,0
+s/^[ 	]*\.stabs[ 	]*\("[^"]*"\),[ 	]*\([^,]*\),[ 	]*0,0,[ 	]*\(.*\)$/.stabx \1,\3,\2,0/
+s/N_GSYM/128/
+# This needs to be C_DECL, which is used for types, not C_LSYM, which is
+# ignored on the initial scan.
+s/N_LSYM/140/
+s/\.begin_common/.bc/
+# The AIX assembler doesn't want the name in a .ec directive
+s/\.end_common.*/.ec/
+s/\.align_it/.align 1/
+/\.data/d
+/^#/d
diff --git a/gdb/testsuite/gdb.threads/Makefile.in b/gdb/testsuite/gdb.threads/Makefile.in
new file mode 100644
index 0000000..34f22b5
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/Makefile.in
@@ -0,0 +1,31 @@
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+EXECUTABLES = pthreads
+
+all:
+	@echo "Nothing to be done for all..."
+
+info:
+install-info:
+dvi:
+install:
+uninstall: force
+installcheck:
+check:
+
+clean mostlyclean:
+	-rm -f *~ *.o a.out xgdb *.x *.ci *.tmp core* $(EXECUTABLES)
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log config.h
+
+Makefile : $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
+
+config.h: stamp-h ; @true
+stamp-h: config.in config.status
+	CONFIG_HEADERS=config.h:config.in $(SHELL) config.status
+
+config.status: configure
+	$(SHELL) config.status --recheck
diff --git a/gdb/testsuite/gdb.threads/config.in b/gdb/testsuite/gdb.threads/config.in
new file mode 100644
index 0000000..37bfc2b
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/config.in
@@ -0,0 +1,4 @@
+/* config.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if you have the <pthread.h> header file.  */
+#undef HAVE_PTHREAD_H
diff --git a/gdb/testsuite/gdb.threads/configure b/gdb/testsuite/gdb.threads/configure
new file mode 100755
index 0000000..6649098
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/configure
@@ -0,0 +1,1098 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=pthreads.exp
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:574: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:595: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:613: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:637: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 652 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:658: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 669 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:675: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+for ac_hdr in pthread.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:701: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 706 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@CPP@%$CPP%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.threads/configure.in b/gdb/testsuite/gdb.threads/configure.in
new file mode 100644
index 0000000..1afe91a
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/configure.in
@@ -0,0 +1,18 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(pthreads.exp)
+AC_CONFIG_HEADER(config.h:config.in)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_CHECK_HEADERS(pthread.h)
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.threads/pthreads.c b/gdb/testsuite/gdb.threads/pthreads.c
new file mode 100644
index 0000000..1fe1ae9
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/pthreads.c
@@ -0,0 +1,168 @@
+#include <stdio.h>
+
+#include "config.h"
+
+#ifndef HAVE_PTHREAD_H
+
+/* Don't even try to compile.  In fact, cause a syntax error that we can
+   look for as a compiler error message and know that we have no pthread
+   support.  In that case we can just suppress the test completely. */
+
+#error "no posix threads support"
+
+#else
+
+/* OK.  We have the right header.  If we try to compile this and fail, then
+   there is something wrong and the user should know about it so the testsuite
+   should issue an ERROR result.. */
+
+#ifdef __linux__
+#define  _MIT_POSIX_THREADS 1	/* Linux (or at least RedHat 4.0) needs this */
+#endif
+
+#include <pthread.h>
+
+/* Under OSF 2.0 & 3.0 and HPUX 10, the second arg of pthread_create
+   is prototyped to be just a "pthread_attr_t", while under Solaris it
+   is a "pthread_attr_t *".  Arg! */
+
+#if defined (__osf__) || defined (__hpux__)
+#define PTHREAD_CREATE_ARG2(arg) arg
+#define PTHREAD_CREATE_NULL_ARG2 null_attr
+static pthread_attr_t null_attr;
+#else
+#define PTHREAD_CREATE_ARG2(arg) &arg
+#define PTHREAD_CREATE_NULL_ARG2 NULL
+#endif
+
+static int verbose = 0;
+
+static void
+common_routine (arg)
+     int arg;
+{
+  static int from_thread1;
+  static int from_thread2;
+  static int from_main;
+  static int hits;
+  static int full_coverage;
+
+  if (verbose) printf("common_routine (%d)\n", arg);
+  hits++;
+  switch (arg)
+    {
+    case 0:
+      from_main++;
+      break;
+    case 1:
+      from_thread1++;
+      break;
+    case 2:
+      from_thread2++;
+      break;
+    }
+  if (from_main && from_thread1 && from_thread2)
+    full_coverage = 1;
+}
+
+static void *
+thread1 (void *arg)
+{
+  int i;
+  int z = 0;
+
+  if (verbose) printf ("thread1 (%0x) ; pid = %d\n", arg, getpid ());
+  for (i=1; i <= 10000000; i++)
+    {
+      if (verbose) printf("thread1 %d\n", pthread_self ());
+      z += i;
+      common_routine (1);
+      sleep(1);
+    }
+}
+
+static void *
+thread2 (void * arg)
+{
+  int i;
+  int k = 0;
+
+  if (verbose) printf ("thread2 (%0x) ; pid = %d\n", arg, getpid ());
+  for (i=1; i <= 10000000; i++)
+    {
+      if (verbose) printf("thread2 %d\n", pthread_self ());
+      k += i;
+      common_routine (2);
+      sleep(1);
+    }
+  sleep(100);
+}
+
+int
+foo (a, b, c)
+     int a, b, c;
+{
+  int d, e, f;
+
+  if (verbose) printf("a=%d\n", a);
+}
+
+main(argc, argv)
+     int argc;
+     char **argv;
+{
+  pthread_t tid1, tid2;
+  int j;
+  int t = 0;
+  void (*xxx) ();
+  pthread_attr_t attr;
+
+  if (verbose) printf ("pid = %d\n", getpid());
+
+  foo (1, 2, 3);
+
+#ifndef __osf__
+  if (pthread_attr_init (&attr))
+    {
+      perror ("pthread_attr_init 1");
+      exit (1);
+    }
+#endif
+
+#ifdef PTHREAD_SCOPE_SYSTEM
+  if (pthread_attr_setscope (&attr, PTHREAD_SCOPE_SYSTEM))
+    {
+      perror ("pthread_attr_setscope 1");
+      exit (1);
+    }
+#endif
+
+  if (pthread_create (&tid1, PTHREAD_CREATE_ARG2(attr), thread1, (void *) 0xfeedface))
+    {
+      perror ("pthread_create 1");
+      exit (1);
+    }
+  if (verbose) printf ("Made thread %d\n", tid1);
+  sleep (1);
+
+  if (pthread_create (&tid2, PTHREAD_CREATE_NULL_ARG2, thread2, (void *) 0xdeadbeef))
+    {
+      perror ("pthread_create 2");
+      exit (1);
+    }
+  if (verbose) printf("Made thread %d\n", tid2);
+
+  sleep (1);
+
+  for (j = 1; j <= 10000000; j++)
+    {
+      if (verbose) printf("top %d\n", pthread_self ());
+      common_routine (0);
+      sleep(1);
+      t += j;
+    }
+  
+  exit(0);
+}
+
+#endif	/* ifndef HAVE_PTHREAD_H */
diff --git a/gdb/testsuite/gdb.threads/pthreads.exp b/gdb/testsuite/gdb.threads/pthreads.exp
new file mode 100644
index 0000000..08e4af3
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/pthreads.exp
@@ -0,0 +1,328 @@
+# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+# This only works with native configurations
+if ![isnative] then {
+    return
+}
+
+set testfile "pthreads"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+# regexp for "horizontal" text (i.e. doesn't include newline or
+# carriage return)
+set horiz "\[^\n\r\]*"
+
+set built_binfile 0
+if [istarget "*-*-linux"] then {
+    set target_cflags "-D_MIT_POSIX_THREADS"
+} else {
+    set target_cflags ""
+}
+set why_msg "unrecognized error"
+foreach lib {-lpthreads -lpthread} {
+    set options "debug"
+    lappend options "incdir=${objdir}/${subdir}"
+    lappend options "libs=$lib"
+    set ccout [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $options]
+    switch -regexp -- $ccout {
+	".*no posix threads support.*" {
+	    set why_msg "missing threads include file"
+	    break
+	}
+	".*cannot open -lpthread.*" {
+	    set why_msg "missing runtime threads library"
+	}
+	".*Can't find library for -lpthread.*" {
+	    set why_msg "missing runtime threads library"
+	}
+	{^$} {
+	    pass "successfully compiled posix threads test case"
+	    set built_binfile 1
+	    break
+	}
+    }
+}
+if {$built_binfile == "0"} {
+    unsupported "Couldn't compile ${srcfile}, ${why_msg}"
+    return -1
+}
+
+# Now we can proceed with the real testing.
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+gdb_test "set print sevenbit-strings" ""
+#gdb_test "set print address off" ""
+gdb_test "set width 0" ""
+
+# We'll need this when we send_gdb a ^C to GDB.  Need to do it before we
+# run the program and gdb starts saving and restoring tty states.
+# On Ultrix, we don't need it and it is really slow (because shell_escape
+# doesn't use vfork).
+if ![istarget "*-*-ultrix*"] then {
+    gdb_test "shell stty intr '^C'" ""
+}
+
+proc all_threads_running {} {
+    global gdb_prompt
+    global srcfile
+
+    # Reset all the counters to zero.
+    gdb_test "set var common_routine::hits=0" ""
+    gdb_test "set var common_routine::from_thread1=0" ""
+    gdb_test "set var common_routine::from_thread2=0" ""
+    gdb_test "set var common_routine::from_main=0" ""
+    gdb_test "set var common_routine::full_coverage=0" ""
+
+    # Disable all breakpoints.
+    gdb_test "disable" ""
+
+    # Set up a breakpoint that will cause us to stop when we have
+    # been called 15 times.  This should be plenty of time to allow
+    # every thread to run at least once, since each thread sleeps for
+    # one second between calls to common_routine.
+    gdb_test "tbreak common_routine if hits == 15" ""
+
+    # Start all the threads running again and wait for the inferior
+    # to stop.  Since no other breakpoints are set at this time
+    # we should stop only when we have been previously called 15 times.
+
+    send_gdb "continue\n"
+    gdb_expect {
+	-re "Continuing.*common_routine.*at.*$srcfile.*$gdb_prompt $" {}
+	default {
+	    fail "continue until common routine run 15 times"
+	    return 0
+	}
+	timeout {
+	    fail "continue until common routine run 15 times (timeout)"
+	    return 0
+	}
+    }
+
+    # Check that we stopped when we actually expected to stop, by
+    # verifying that there have been 15 previous hits.
+
+    send_gdb "p common_routine::hits\n"
+    gdb_expect {
+	-re ".*= 15\r\n$gdb_prompt $" {}
+	default {
+	    fail "stopped before calling common_routine 15 times"
+	    return 0
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "stopped before calling common_routine 15 times"
+	    return 0
+	}
+	timeout {
+	    fail "stopped before calling common_routine 15 times (timeout)"
+	    return 0
+	}
+    }
+
+    # Also check that all of the threads have run, which will only be true
+    # if the full_coverage variable is set.
+
+    send_gdb "p common_routine::full_coverage\n"
+    gdb_expect {
+	-re ".*= 1\r\n$gdb_prompt $" {}
+	default {
+	    fail "some threads didn't run"
+	    return 0
+	}
+	timeout {
+	    fail "some threads didn't run (timeout)"
+	    return 0
+	}
+    }
+
+    # Looks fine, return success.
+    return 1
+}
+
+proc test_startup {} {
+    global srcdir srcfile gdb_prompt expect_out
+    global horiz
+    global main_id thread1_id thread2_id
+
+    # We should be able to do an info threads before starting any others.
+    send_gdb "info threads\n"
+    gdb_expect {
+	-re ".*Thread.*LWP.*main.*$gdb_prompt $" {
+	    pass "info threads"
+	}
+	-re "\r\n$gdb_prompt $" {
+	    pass "info threads"
+	    setup_xfail "*-*-*"
+	    fail "gdb does not support pthreads for this machine"
+	    return 0
+	}
+    }
+
+    # Extract the thread id number of main thread from "info threads" output.
+    send_gdb "info threads\n"
+    gdb_expect -re "(\[0-9\]+)(${horiz}Thread${horiz}main.*)($gdb_prompt $)"
+    set main_id $expect_out(1,string)
+
+    # Check that we can continue and create the first thread.
+    gdb_test "break thread1" "Breakpoint .* file .*$srcdir.*"
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint .*, thread1 \\(arg=0xfeedface\\).*at.*$srcfile.*" \
+	    "Continue to creation of first thread"
+    gdb_test "disable" ""
+
+    # Extract the thread id number of thread 1 from "info threads" output.
+    send_gdb "info threads\n"
+    gdb_expect -re "(\[0-9\]+)(${horiz}Thread${horiz}thread1.*)($gdb_prompt $)"
+    set thread1_id $expect_out(1,string)
+
+    # Check that we can continue and create the second thread,
+    # ignoring the first thread for the moment.
+    gdb_test "break thread2" "Breakpoint .* file .*$srcdir.*"
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint .*, thread2 \\(arg=0xdeadbeef\\).*at.*$srcfile.*" \
+	    "Continue to creation of second thread"
+
+    # Extract the thread id number of thread 2 from "info threads" output.
+    send_gdb "info threads\n"
+    gdb_expect -re "(\[0-9\]+)(${horiz}Thread${horiz}thread2.*)($gdb_prompt $)"
+    set thread2_id $expect_out(1,string)
+
+    return 1
+}
+
+proc check_control_c {} {
+    global gdb_prompt
+
+    # Verify that all threads are running.
+    if [all_threads_running] then {
+	pass "All threads running after startup"
+    }
+
+    # Send a continue followed by ^C to the process to stop it.
+    send_gdb "continue\n"
+    set description "Stopped with a ^C"
+    after 1000 [send_gdb "\003"]
+    gdb_expect {
+	-re "Program received signal SIGINT.*$gdb_prompt $" {
+	    pass $description
+	}
+	-re "Quit.*$gdb_prompt $" {
+	    pass $description
+	}
+	timeout {
+	    fail "$description (timeout)"
+	}
+    }
+    gdb_test "bt" ""
+
+    # Verify that all threads can be run again after a ^C stop.
+    if [all_threads_running] then {
+	pass "All threads running after continuing from ^C stop"
+    }
+}
+
+proc check_backtraces {} {
+    global gdb_prompt main_id thread1_id thread2_id
+
+    # Check that the "thread apply N backtrace" command works
+
+    gdb_test "thread apply $main_id backtrace" \
+	    ".* in main \\(argc=.*, argv=.*\\).*" \
+	    "check backtrace from main thread"
+    gdb_test "thread apply $thread1_id backtrace" \
+	    ".* in thread1 \\(arg=0xfeedface\\).*" \
+	    "check backtrace from thread 1"
+    gdb_test "thread apply $thread2_id backtrace" \
+	    ".* in thread2 \\(arg=0xdeadbeef\\).*" \
+	    "check backtrace from thread 2"
+
+    # Check that we can apply the backtrace command to all
+    # three threads with a single gdb command
+
+    gdb_test "thread apply $main_id $thread1_id $thread2_id bt" \
+	    ".* in main .* in thread1 .* in thread2.*" \
+	    "apply backtrace command to all three threads"
+
+    # Check that we can do thread specific backtraces
+    # This also tests that we can do thread specific breakpoints.
+
+    gdb_test "break common_routine thread $thread2_id" \
+	    "Breakpoint .* at 0x.* file .* line .*" \
+	    "set break at common_routine in thread 2"
+
+    send_gdb "continue\n"
+    gdb_expect {
+	-re "Breakpoint .* common_routine \\(arg=2\\).*" {
+	    send_gdb "backtrace\n"
+	    gdb_expect {
+		-re "#0.*common_routine \\(arg=2\\).*#1.*thread2.*" {
+		    pass "backtrace from thread 2 bkpt in common_routine"
+		}
+		default {
+		    fail "backtrace from thread 2 bkpt in common_routine"
+		}
+		timeout {
+		    fail "backtrace from thread 2 bkpt in common_routine (timeout)"
+		}
+	    }
+	}
+	-re "Breakpoint .* common_routine \\(arg=0\\).*" {
+	    fail "stopped in main thread at breakpoint for thread 2"
+	}
+	-re "Breakpoint .* common_routine \\(arg=1\\).*" {
+	    fail "stopped in main thread at breakpoint for thread 1"
+	}
+	-re ".*$gdb_prompt" {
+	    fail "continue to bkpt at common_routine in thread 2"
+	}
+	default {
+	    fail "continue to bkpt at common_routine in thread 2"
+	}
+	timeout {
+	    fail "continue to bkpt at common_routine in thread 2 (timeout)"
+	}
+    }
+}
+
+setup_xfail "alpha-*-osf*"
+if [runto_main] then {
+    clear_xfail "alpha-*-osf*"
+    if [test_startup] then {
+	check_control_c
+	check_backtraces
+    }
+}
+clear_xfail "alpha-*-osf*"
diff --git a/gdb/testsuite/gdb.threads/step.c b/gdb/testsuite/gdb.threads/step.c
new file mode 100644
index 0000000..1b18a4b
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/step.c
@@ -0,0 +1,221 @@
+/*    step.c for step.exp    */
+#include <ipc.h>
+#include <pthread.h>
+#include <st.h>
+#include <signal.h>
+#include <stdio.h>
+
+void alarm_handler ();
+void alarm_handler1 ();
+void alarm_handler2 ();
+void thread1 ();
+void thread2 ();
+
+#define TIME_LIMIT 30
+
+
+int count1 = 0;
+int count2 = 0;
+
+pthread_t tid1, tid2;
+pthread_attr_t attr1, attr2;
+
+pthread_mutex_t mut;
+pthread_mutexattr_t mut_attr;
+
+pthread_condattr_t cv_attr_a, cv_attr_b;
+pthread_cond_t cv_a, cv_b;
+
+struct cv_struct
+  {
+    char a;
+    char b;
+  }
+test_struct;
+
+main ()
+{
+  /*init la struct */
+  test_struct.a = 0;
+  test_struct.b = 1;
+
+  /* create le mutex */
+  if (pthread_mutexattr_create (&mut_attr) == -1)
+    {
+      perror ("mutexattr_create");
+      exit (1);
+    }
+
+
+  if (pthread_mutex_init (&mut, mut_attr) == -1)
+    {
+      perror ("mutex_init");
+      exit (1);
+    }
+
+  /* create 2 cv */
+  if (pthread_condattr_create (&cv_attr_a) == -1)
+    {
+      perror ("condattr_create(1)");
+      exit (1);
+    }
+
+  if (pthread_cond_init (&cv_a, cv_attr_a) == -1)
+    {
+      perror ("cond_init(1)");
+      exit (1);
+    }
+
+  if (pthread_condattr_create (&cv_attr_b) == -1)
+    {
+      perror ("condattr_create(2)");
+      exit (1);
+    }
+
+  if (pthread_cond_init (&cv_b, cv_attr_b) == -1)
+    {
+      perror ("cond_init(2)");
+      exit (1);
+    }
+
+  /* create 2 threads of execution */
+  if (pthread_attr_create (&attr1) == -1)
+    {
+      perror ("attr_create(1)");
+      exit (1);
+    }
+
+  if (pthread_create (&tid1, attr1, thread1, &count1) == -1)
+    {
+      perror ("pthread_create(1)");
+      exit (1);
+    }
+
+  if (pthread_attr_create (&attr2) == -1)
+    {
+      perror ("attr_create(2)");
+      exit (1);
+    }
+
+  if (pthread_create (&tid2, attr2, thread2, &count2) == -1)
+    {
+      perror ("pthread_create(2)");
+      exit (1);
+    }
+
+  /* set alarm to print out data and exit */
+  signal (SIGALRM, alarm_handler);
+  alarm (TIME_LIMIT);
+
+  for (;;)
+    pause ();
+}
+
+void 
+thread1 (count)
+     int *count;
+{
+  tid_t tid;
+
+  tid = getstid ();
+  printf ("Thread1 tid 0x%x  (%d) \n", tid, tid);
+  printf ("Thread1 @tid=0x%x \n", &tid);
+  signal (SIGALRM, alarm_handler1);
+
+  for (;;)
+    {
+      if (pthread_mutex_lock (&mut) == -1)
+	{
+	  perror ("pthread_mutex_lock(1)");
+	  pthread_exit ((void *) 0);
+	}
+
+      while (test_struct.a == 0)
+	{
+	  if (pthread_cond_wait (&cv_a, &mut) == -1)
+	    {
+	      perror ("pthread_cond_wait(1)");
+	      pthread_exit ((void *) -1);
+	    }
+	}
+
+      (*count)++;
+      printf ("*******thread1 count %d\n", *count);
+
+      test_struct.a = 0;
+
+      test_struct.b = 1;
+      pthread_cond_signal (&cv_b);
+
+      if (pthread_mutex_unlock (&mut) == -1)
+	{
+	  perror ("pthread_mutex_unlock(1)");
+	  pthread_exit ((void *) -1);
+	}
+    }
+}
+
+void 
+thread2 (count)
+     int *count;
+{
+  tid_t tid;
+
+  tid = getstid ();
+  printf ("Thread2 tid 0x%x  (%d) \n", tid, tid);
+  printf ("Thread1 @tid=0x%x \n", &tid);
+  signal (SIGALRM, alarm_handler2);
+
+  for (;;)
+    {
+      if (pthread_mutex_lock (&mut) == -1)
+	{
+	  perror ("pthread_mutex_lock(2)");
+	  pthread_exit ((void *) 0);
+	}
+
+      while (test_struct.b == 0)
+	{
+	  if (pthread_cond_wait (&cv_b, &mut) == -1)
+	    {
+	      perror ("pthread_cond_wait(2)");
+	      pthread_exit ((void *) -1);
+	    }
+	}
+
+      (*count)++;
+      printf ("*******thread2 count %d\n", *count);
+
+      test_struct.b = 0;
+
+      test_struct.a = 1;
+      pthread_cond_signal (&cv_a);
+
+      if (pthread_mutex_unlock (&mut) == -1)
+	{
+	  perror ("pthread_mutex_unlock(2)");
+	  pthread_exit ((void *) -1);
+	}
+    }
+}
+
+
+void 
+alarm_handler ()
+{
+  printf ("\tcount1 (%d) \n\tcount2 (%d)\n", count1, count2);
+  exit (0);
+}
+
+void 
+alarm_handler1 ()
+{
+  printf ("ALARM thread 1\n");
+}
+
+void 
+alarm_handler2 ()
+{
+  printf ("ALARM thread 2\n");
+  pthread_exit ((void *) 0);
+}
diff --git a/gdb/testsuite/gdb.threads/step.exp b/gdb/testsuite/gdb.threads/step.exp
new file mode 100644
index 0000000..aa56393
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/step.exp
@@ -0,0 +1,200 @@
+# step.exp -- Expect script to test gdb with step.c
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Hiro Sugawara. (hiro@lynx.com)
+#
+# This test really needs some major surgery to be acceptable, but
+# I'm just about burnt out on lynx work, so I'm not doing it now.
+#
+#	* The test has an indeterminate number of pass/fails
+#	for each run (it runs a small group of tests until
+#	it's timer kicks off).  This is very bad for nightly
+#	automated regression testing.
+#
+#	* It tries to "step" from withint he prologue of a
+# 	function.  This isn't support in gdb (it's going
+#	to act like a continue).
+#
+#	* This test rarely check that it stopped in sensible
+#	places.  (see previous bullet -- this test doesn't
+#	catch the fact it continued rather than stepped)
+
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set program_exited 0
+
+proc set_bp { where } {
+    global gdb_prompt
+
+    send_gdb "break $where\n"
+    # The first regexp is what we get with -g, the second without -g.
+    gdb_expect {
+	-re "Break.* at .*: file .*, line \[0-9\]*.*$gdb_prompt $" {}
+	-re "Breakpoint \[0-9\]* at 0x\[0-9a-f\]*.*$gdb_prompt $" {}
+	-re "$gdb_prompt $" { fail "setting breakpoint at $where" ; return 0 }
+	timeout { fail "setting breakpoint at $where (timeout)" ; return 0 }
+    }
+    pass "set_bp"
+}
+
+proc step_it { cmd } {
+    global gdb_prompt
+    global program_exited
+
+    send_gdb "$cmd\n"
+    gdb_expect {
+	-re "0x\[0-9A-Fa-f\]* *in.*\r\n$gdb_prompt $" { pass "step_it"; return 0 }
+	-re "0x\[0-9A-Fa-f\]* *\[0-9\]*.*\r\n$gdb_prompt $" { pass "step_it"; return 1 }
+	-re "Program exited .*\n$gdb_prompt $" {
+		set program_exited 1
+		return -1
+	    }
+	-re "$gdb_prompt $"	{ fail "single-stepping ($cmd).\n" ; return -1 }
+	timeout	{ fail "single-stepping ($cmd) timout.\n" ; return -1 }
+    }
+}
+
+proc step_inst {} {
+    step_it "stepi"
+}
+
+proc step_source {} {
+    step_it "step"
+}
+
+proc continue_all {} {
+    global gdb_prompt
+
+    send_gdb "continue\n"
+    gdb_expect {
+	-re "Breakpoint \[0-9\]*, thread\[0-9\]* .*$gdb_prompt $" { 
+	    pass "continue_all"
+	    return 0
+	}
+	-re "Program exited .*\n$gdb_prompt $" {
+	    set program_exited 1
+	    return 1;
+	}
+	-re "$gdb_prompt $" { fail "continue" ; return -1 }
+	timeout { fail "continue (timeout)" ; return -1 }
+    }
+}
+
+proc check_threads { num_threads } {
+    global gdb_prompt
+
+    set curr_thread 0
+    send_gdb "info threads\n"
+    while { $num_threads > 0 } {
+	gdb_expect {
+	    -re "\\* *\[0-9\]* process \[0-9\]* thread \[0-9\]* .*\n" {
+		incr curr_thread
+		set num_threads [expr $num_threads - 1]
+	    }
+	    -re " *\[0-9\]* process \[0-9\]* thread \[0-9\]* .*\n" {
+		set num_threads [expr $num_threads - 1]
+	    }
+	    -re "$gdb_prompt $" {
+		if { $num_threads < 0 } {
+		    fail "check_threads (too many)" ; return -1
+		}
+		break
+	    }
+	    timeout { fail "check_threads (timeout)" ; return -1 }
+	}
+    }
+
+    if { $curr_thread == 0 } {
+	fail "check_threads (no current thread)\n"
+	return -1
+    }
+    if { $curr_thread > 1 } {
+	fail "check_threads (more than one current thread)\n"
+	return -1
+    }
+    return 0
+}
+
+proc test_cond_wait {} {
+    global program_exited
+
+    set_bp	135
+    runto	179
+    while { 1 } {
+	set stepi_counter 0
+	while { [step_inst] } {
+		if { $program_exited } { break }
+		incr stepi_counter
+		if { $stepi_counter > 30 } {
+			fail "too many stepi's per line\n"
+			return -1
+		}
+	}
+	if { $program_exited } { break }
+	step_source
+	if { $program_exited } { break }
+	continue_all
+	if { $program_exited } { break }
+	check_threads 3
+    }
+}
+
+proc do_tests {} {
+    global prms_id
+    global bug_id
+    global subdir
+    global objdir
+    global srcdir
+    global binfile
+    global gdb_prompt
+
+    set prms_id 0
+    set bug_id 0
+
+    # Start with a fresh gdb.
+
+    gdb_exit
+    gdb_start
+    gdb_reinitialize_dir $srcdir/$subdir
+    gdb_load $objdir/$subdir/$binfile
+
+    send_gdb "set width 0\n"
+    gdb_expect -re "$gdb_prompt $"
+
+    test_cond_wait
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set binfile "step"
+set srcfile "step.c"
+
+if ![file exists $objdir/$subdir/$binfile] then {
+    if $all_flag then {
+	warning "$binfile does not exist; tests suppressed."
+    }
+} else {
+    do_tests
+}
diff --git a/gdb/testsuite/gdb.threads/step2.exp b/gdb/testsuite/gdb.threads/step2.exp
new file mode 100644
index 0000000..5442e6a
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/step2.exp
@@ -0,0 +1,150 @@
+# step2.exp -- Expect script to test gdb step.c
+# Copyright (C) 1992, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Jeff Law. (law@cygnus.com)
+#
+
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set program_exited 0
+
+# A simple and crude test to see that we can step two threads independently
+proc test_multi_threaded_stepping {} {
+    global gdb_prompt
+    global hex
+    global srcfile
+    global decimal
+
+    # Set breakpoints in code that we know is executed in only
+    # thread of control.
+    gdb_test "break thread1" \
+	     "Break.* at $hex: file .*$srcfile, line $decimal\\."
+    gdb_test "break thread2" \
+	     "Break.* at $hex: file .*$srcfile, line $decimal\\."
+
+    # the order in which things happen is indeterminate.  So we basically
+    # look for a set of events and note that each one happens and that
+    # all of the required events have happened when we're done.
+    #
+    # Right now we only verify that both threads start and that they
+    # both call pthread_cond_wait twice.
+    set thread1started 0
+    set thread1condwait 0
+    set thread2started 0
+    set thread2condwait 0
+    
+    send_gdb "run\n"
+    gdb_expect {
+	-re "The program .* has been started already.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re ".*Breakpoint \[0-9\]+,.*thread1.* at .*$srcfile:.*\[\t \].*$gdb_prompt $" {
+	    if { $thread1started != 0 } then {
+		fail "thread1 started"
+		return
+	    } else {
+		set thread1started 1
+		pass "thread1 started"
+	    }
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	-re ".*Breakpoint \[0-9\]+,.*thread2.* at .*$srcfile:.*\[\t \].*$gdb_prompt $" {
+	    if { $thread2started != 0 } then {
+		fail "thread2 started"
+		return
+	    } else {
+		set thread2started 1
+		pass "thread2 started"
+	    }
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	-re ".*pthread_cond_wait.*cv_a.*$gdb_prompt" {
+	    if { $thread1started == 0 } then {
+		fail "thread1 condwait"
+		return
+	    }
+	    if { $thread1condwait < 2 } then {
+		pass "thread1 condwait"
+		incr thread1condwait
+	    }
+	    if { $thread2condwait == 2 } then {
+		pass "multi threaded stepping"
+		return
+	    }
+	    send_gdb "step\n"
+	    exp_continue
+	}
+		    
+	-re ".*pthread_cond_wait.*cv_b.*$gdb_prompt" {
+	    if { $thread2started == 0 } then {
+		fail "thread2 condwait"
+		return
+	    }
+	    if { $thread2condwait < 2 } then {
+		pass "thread2 condwait"
+		incr thread2condwait
+	    }
+	    if { $thread1condwait == 2 } then {
+		pass "multi threaded stepping"
+		return
+	    }
+	    send_gdb "step\n"
+	    exp_continue
+	}
+		    
+	-re "$gdb_prompt" {
+	    send_gdb "step\n"
+	    exp_continue
+	}
+	default { fail "multi threaded stepping" }
+    }
+}
+
+# Check to see if we have an executable to test.  If not, then either we
+# haven't tried to compile one, or the compilation failed for some reason.
+# In either case, just notify the user and skip the tests in this file.
+
+set binfile "step"
+set srcfile "step.c"
+
+if ![file exists $objdir/$subdir/$binfile] then {
+    if $all_flag then {
+	warning "$binfile does not exist; tests suppressed."
+    }
+    return
+}
+
+set prms_id 0
+set bug_id 0
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $objdir/$subdir/$binfile
+
+test_multi_threaded_stepping
diff --git a/gdb/testsuite/gdb.trace/Makefile.in b/gdb/testsuite/gdb.trace/Makefile.in
new file mode 100644
index 0000000..601c9e1
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/Makefile.in
@@ -0,0 +1,21 @@
+#### host, target, and site specific Makefile frags come in here.
+
+VPATH = @srcdir@
+srcdir = @srcdir@
+
+.PHONY: all clean mostlyclean distclean realclean
+
+all: 
+	@echo "Nothing to be done for all..."	
+
+clean mostlyclean:
+	-rm -f actions circ collection limits
+	-rm -f *.o *.diff *~ *.bad core sh3 hppa mn10200 mn10300
+
+distclean maintainer-clean realclean: clean
+	-rm -f Makefile config.status config.log
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure.in
+	$(SHELL) ./config.status --recheck
+
+
diff --git a/gdb/testsuite/gdb.trace/actions.c b/gdb/testsuite/gdb.trace/actions.c
new file mode 100644
index 0000000..e8df614
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/actions.c
@@ -0,0 +1,134 @@
+/*
+ * Test program for trace action commands
+ */
+
+static char   gdb_char_test;
+static short  gdb_short_test;
+static long   gdb_long_test;
+static char   gdb_arr_test[25];
+static struct GDB_STRUCT_TEST
+{
+  char   c;
+  short  s;
+  long   l;
+  int    bfield : 11;	/* collect bitfield */
+  char   arr[25];
+  struct GDB_STRUCT_TEST *next;
+} gdb_struct1_test, gdb_struct2_test, *gdb_structp_test, **gdb_structpp_test;
+
+static union GDB_UNION_TEST
+{
+  char   c;
+  short  s;
+  long   l;
+  int    bfield : 11;	/* collect bitfield */
+  char   arr[4];
+  union GDB_UNION_TEST *next;
+} gdb_union1_test;
+
+void gdb_recursion_test (int, int, int, int,  int,  int,  int);
+
+void gdb_recursion_test (int depth, 
+			 int q1, 
+			 int q2, 
+			 int q3, 
+			 int q4, 
+			 int q5, 
+			 int q6)
+{	/* gdb_recursion_test line 0 */
+  int q = q1;						/* gdbtestline 1 */
+
+  q1 = q2;						/* gdbtestline 2 */
+  q2 = q3;						/* gdbtestline 3 */
+  q3 = q4;						/* gdbtestline 4 */
+  q4 = q5;						/* gdbtestline 5 */
+  q5 = q6;						/* gdbtestline 6 */
+  q6 = q;						/* gdbtestline 7 */
+  if (depth--)						/* gdbtestline 8 */
+    gdb_recursion_test (depth, q1, q2, q3, q4, q5, q6);	/* gdbtestline 9 */
+}
+
+
+unsigned long   gdb_c_test( unsigned long *parm )
+
+{
+   char *p = "gdb_c_test";
+   char *rediculously_long_variable_name_with_equally_long_string_assignment;
+   register long local_reg = 7;
+   static unsigned long local_static, local_static_sizeof;
+   long local_long;
+   unsigned long *stack_ptr;
+   unsigned long end_of_stack;
+
+   rediculously_long_variable_name_with_equally_long_string_assignment = 
+     "rediculously long variable name with equally long string assignment";
+   local_static = 9;
+   local_static_sizeof = sizeof (struct GDB_STRUCT_TEST);
+   local_long = local_reg + 1;
+   stack_ptr  = (unsigned long *) &local_long;
+   end_of_stack = 
+     (unsigned long) &stack_ptr + sizeof(stack_ptr) + sizeof(end_of_stack) - 1;
+
+   gdb_char_test   = gdb_struct1_test.c = (char)   ((long) parm[1] & 0xff);
+   gdb_short_test  = gdb_struct1_test.s = (short)  ((long) parm[2] & 0xffff);
+   gdb_long_test   = gdb_struct1_test.l = (long)   ((long) parm[3] & 0xffffffff);
+   gdb_union1_test.l = (long) parm[4];
+   gdb_arr_test[0] = gdb_struct1_test.arr[0] = (char) ((long) parm[1] & 0xff);
+   gdb_arr_test[1] = gdb_struct1_test.arr[1] = (char) ((long) parm[2] & 0xff);
+   gdb_arr_test[2] = gdb_struct1_test.arr[2] = (char) ((long) parm[3] & 0xff);
+   gdb_arr_test[3] = gdb_struct1_test.arr[3] = (char) ((long) parm[4] & 0xff);
+   gdb_arr_test[4] = gdb_struct1_test.arr[4] = (char) ((long) parm[5] & 0xff);
+   gdb_arr_test[5] = gdb_struct1_test.arr[5] = (char) ((long) parm[6] & 0xff);
+   gdb_struct1_test.bfield = 144;
+   gdb_struct1_test.next = &gdb_struct2_test;
+   gdb_structp_test      = &gdb_struct1_test;
+   gdb_structpp_test     = &gdb_structp_test;
+
+   gdb_recursion_test (3, (long) parm[1], (long) parm[2], (long) parm[3],
+		       (long) parm[4], (long) parm[5], (long) parm[6]);
+
+   gdb_char_test = gdb_short_test = gdb_long_test = 0;
+   gdb_structp_test  = (void *) 0;
+   gdb_structpp_test = (void *) 0;
+   memset ((char *) &gdb_struct1_test, 0, sizeof (gdb_struct1_test));
+   memset ((char *) &gdb_struct2_test, 0, sizeof (gdb_struct2_test));
+   local_static_sizeof = 0;
+   local_static = 0;
+   return ( (unsigned long) 0 );
+}
+
+static void gdb_asm_test (void)
+{
+}
+
+static void begin ()	/* called before anything else */
+{
+}
+
+static void end ()	/* called after everything else */
+{
+}
+
+int
+main (argc, argv, envp)
+     int argc;
+     char *argv[], **envp;
+{
+  int i;
+  unsigned long myparms[10];
+
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+
+  begin ();
+  for (i = 0; i < sizeof (myparms) / sizeof (myparms[0]); i++)
+    myparms[i] = i;
+
+  gdb_c_test (&myparms[0]);
+
+  end ();
+  return 0;
+}
+
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
new file mode 100644
index 0000000..f9ac7a4
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -0,0 +1,207 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    set binfile [board_info target d490_binfile];
+    set srcfile gdb_c_test.c
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+
+set baseline  [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+set testline1 [expr $baseline + 7]
+
+#
+# test actions command
+#
+
+gdb_delete_tracepoints
+set trcpt1 [gdb_gettpnum gdb_c_test];
+set trcpt2 [gdb_gettpnum gdb_asm_test];
+set trcpt3 [gdb_gettpnum $testline1];
+if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+# 5.1 actions of specified tracepoint
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "Actions for tracepoint \[0-9\]+:.*$gdb_prompt $" {
+	fail "5.1a: testsuite failure (tracepoint already has action)!"
+    }
+    -re "No tracepoints.*$gdb_prompt $" {
+	fail "5.1a: set three tracepoints, no actions (No tracepoints!)"
+    }
+    -re "$gdb_prompt $" {
+	pass "5.1a: set three tracepoints, no actions"
+    }
+}
+
+gdb_trace_setactions "5.1b: set actions for first tracepoint" \
+	"$trcpt1" \
+	"collect gdb_char_test" "^$"
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "Actions for.* $trcpt1:.*collect gdb_char_test.*$gdb_prompt $" {
+	pass "5.1c: verify actions set for first tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	fail "5.1c: verify actions set for first tracepoint"
+    }
+}
+
+gdb_trace_setactions "5.1d: set actions for second tracepoint" \
+	"$trcpt2" \
+	"collect gdb_short_test" "^$"
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "Actions for.* $trcpt2:.*collect gdb_short_test.*$gdb_prompt $" {
+	pass "5.1e: verify actions set for second tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	fail "5.1e: verify actions set for second tracepoint"
+    }
+}
+
+gdb_trace_setactions "5.2a: set actions for last (default) tracepoint" \
+	"" \
+	"collect gdb_long_test" "^$"
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "Actions for.* $trcpt3:.*collect gdb_long_test.*$gdb_prompt $" {
+	pass "5.2b: verify actions set for last (default) tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	fail "5.2b: verify actions set for last (default) tracepoint"
+    }
+}
+
+# 5.3 replace actions set earlier
+
+gdb_trace_setactions "5.3a: reset actions for first tracepoint" \
+	"$trcpt1" \
+	"collect gdb_struct1_test" "^$"
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "Actions for.* $trcpt1:.*collect gdb_struct1_test.*$gdb_prompt $" {
+	pass "5.3b: verify actions set for first tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	fail "5.3b: verify actions set for first tracepoint"
+    }
+}
+
+#
+# test end command (all by itself)
+#
+
+# 5.4 end outside of context
+
+gdb_test "end" "This command cannot be used at the top level." \
+			"5.4: 'end' command out of context"
+
+# 5.5 empty actions (just an end with no other actions)
+
+gdb_trace_setactions "5.5a: set empty actions for first tracepoint" \
+	"$trcpt1"
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "No tracepoints.*$gdb_prompt $" {
+	fail "5.5c: verify NO actions for first tracepoint"
+    }
+    -re "Actions for.* $trcpt1:.*$gdb_prompt $" {
+	fail "5.5c: verify NO actions for first tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	pass "5.5c: verify NO actions for first tracepoint"
+    }
+}
+
+# 5.6 actions for invalid tracepoint number
+
+gdb_test "actions [expr $trcpt2 + $trcpt3]" \
+    "No tracepoint number [expr $trcpt2 + $trcpt3]." \
+			"5.6: actions for invalid tracepoint number"
+
+# 5.7 invalid action (other than 'collect', 'while-stepping' or 'end')
+#	    "warning: .print gdb_c_test. is not a supported trace.*> $" \
+
+gdb_trace_setactions "5.7: invalid action" \
+	"$trcpt1" \
+	"print gdb_c_test" \
+	"warning: .print gdb_c_test. is not a supported trace"
+
+# 5.8 help actions (collect, while-stepping, end)
+
+gdb_test "help actions" \
+    "Specify the actions to be taken at a tracepoint.*" \
+			"5.8a: help actions"
+
+gdb_test "help collect" \
+    "Specify one or more data items to be collected at a tracepoint.*" \
+			"5.8b: help collect"
+
+gdb_test "help while-stepping" \
+    "Specify single-stepping behavior at a tracepoint.*" \
+			"5.8c: help while-stepping"
+
+gdb_test "help end" "Ends a list of commands or actions.*" \
+			"5.8d: help end"
+
diff --git a/gdb/testsuite/gdb.trace/backtrace.exp b/gdb/testsuite/gdb.trace/backtrace.exp
new file mode 100644
index 0000000..4d44ed4
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/backtrace.exp
@@ -0,0 +1,376 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp";
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor "$binfile"
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none"  "" ""
+    send_gdb "compare-sections CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We generously give ourselves one "pass" if we successfully 
+# detect that this test cannot be run on this target!
+if { ![gdb_target_supports_trace] } then {
+    pass "Current target does not supporst trace"
+    return 1;
+
+}
+
+#
+# test backtraces in trace frames
+#
+
+set testline1 0
+set testline2 0
+set testline3 0
+set testline4 0
+set testline5 0
+set testline6 0
+
+set arg1 1
+set arg2 2
+set arg3 3
+set arg4 4
+set arg5 5
+set arg6 6
+
+set baseline [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+send_gdb "list $baseline, +12\n"
+gdb_expect {
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 1 " {
+	set testline1 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 2 " {
+	set testline2 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 3 " {
+	set testline3 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 4 " {
+	set testline4 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 5 " {
+	set testline5 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+).*gdbtestline 6 " {
+	set testline6 $expect_out(1,string)
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($testline1 == 0) || ($testline2 == 0) || ($testline3 == 0) || ($testline4 == 0) || ($testline5 == 0) || ($testline6 == 0) } {
+	    gdb_suppress_entire_file "failed to locate test source lines:
+all tests in this module will fail."
+	}
+    }
+    default {
+	    gdb_suppress_entire_file "failed to locate test source lines (def):
+all tests in this module will fail."
+    } 
+}
+
+#
+# Setup backtrace experiment.  This will involve:
+#   1) a tracepoint where nothing is collected
+#   2) a tracepoint where only regs are collected
+#   3) a tracepoint where regs, locals and args are collected
+#   4) a tracepoint where regs plus some amount of stack are collected.
+#
+
+gdb_delete_tracepoints
+set tdp2 [gdb_gettpnum $testline2]
+set tdp3 [gdb_gettpnum $testline3]
+set tdp4 [gdb_gettpnum $testline4]
+set tdp5 [gdb_gettpnum $testline5]
+set tdp6 [gdb_gettpnum $testline6]
+if {    $tdp2 <= 0 || $tdp3 <= 0 || \
+	$tdp4 <= 0 || $tdp5 <= 0 || $tdp6 <= 0 } then {
+    fail "setting tracepoints failed"
+    return;
+}
+
+#gdb_trace_setactions "setup TP to collect FP" \
+#	"$tdp2" \
+#	"collect \$fp" ""
+#
+
+gdb_trace_setactions "8.6: setup TP to collect regs" \
+	"$tdp3" \
+	"collect \$regs" "^$"
+
+gdb_trace_setactions "8.6: setup TP to collect regs, args, and locals" \
+	"$tdp4" \
+	"collect \$regs, \$args, \$locs" "^$"
+
+gdb_trace_setactions "8.6: setup TP to collect stack mem cast expr" \
+	"$tdp6" \
+	"collect \$fp, \(\*\(void \*\*\) \(\$sp\)\) @ 64" "^$"
+
+gdb_test "tstart" "" ""
+
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,$arg1,$arg2,$arg3,$arg4,$arg5,$arg6"
+    sleep 5
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+}
+
+gdb_test "tstop" "" ""
+
+proc gdb_backtrace_tdp_1 { msg } {
+    global gdb_prompt
+    
+    # We are in a trace frame at which we didn't collect anything
+    # except $PC.  Therefore we expect to be able to identify stack
+    # frame #0, but that's about all.  In particular we do not expect
+    # to be able to display the function's arguments or locals, and we
+    # do not expect to be able to identify the caller of this function.
+    
+    send_gdb "backtrace\n"
+    gdb_expect {
+	-re "#0\[\t \]+gdb_recursion_test.*depth=.*$gdb_prompt $" {
+	    pass "$msg"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$msg"
+	}
+	timeout { fail "$msg (timeout)" }
+    }
+}
+
+proc gdb_backtrace_tdp_2 { msg } {
+    global gdb_prompt
+
+    # We are in a trace frame at which we collected only the registers
+    # Therefore we expect to be able to identify stack frame #0, but
+    # we don't expect to be able to display its args unles they are
+    # passed in registers (which isn't the case for m68k), and we
+    # don't expect to be able to identify the caller's stack frame.
+
+    send_gdb "backtrace\n"
+    gdb_expect {
+	-re "#0\[\t \]+gdb_recursion_test.*depth=.*$gdb_prompt $" {
+	    pass "$msg"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$msg"
+	}
+	timeout { fail "$msg (timeout)" }
+    }
+}
+
+proc gdb_backtrace_tdp_3 { msg } {
+    global gdb_prompt
+
+    # We are in a trace frame at which we collected all registers, all
+    # arguments and all locals.  This means that the display of
+    # stack frame #0 should be complete (including argument values).
+
+    send_gdb "backtrace\n"
+    gdb_expect {
+	-re "#0\[\t \]+gdb_recursion_test.*depth=\[0-9\]+.*q1=\[0-9\]+.*q2=\[0-9\]+.*q3=\[0-9\]+.*q4=\[0-9\]+.*q5=\[0-9\]+.*q6=\[0-9\]+.*$gdb_prompt $" {
+	    pass "$msg"
+	}
+	-re "#0\[\t \]+gdb_recursion_test.*depth=Cannot access.*$gdb_prompt $" {
+	    fail "$msg (failed to collect arguments)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$msg"
+	}
+	timeout { fail "$msg (timeout)" }
+    }
+}
+
+proc gdb_backtrace_tdp_4 { msg depth } {
+    global gdb_prompt
+
+    # We are in a trace frame at which we collected all registers,
+    # plus a sizeable hunk of stack memory.  This should enable us to
+    # display at least several stack frames worth of backtrace.  We'll
+    # assume that if we can't display at least "depth" levels (with
+    # args), it counts as an error.
+
+    send_gdb "backtrace\n"
+    gdb_expect {
+	-re "#$depth\[\t \].*gdb_recursion_test.*depth=\[0-9\]+.*q1=\[0-9\]+.*q2=\[0-9\]+.*q3=\[0-9\]+.*q4=\[0-9\]+.*q5=\[0-9\]+.*q6=\[0-9\]+.*$gdb_prompt $" {
+	    pass "$msg"
+	}
+	-re "#$depth\[\t \].*gdb_recursion_test.*depth=.*$gdb_prompt $" {
+	    fail "$msg (args missing from #$depth stack frame)"
+	}
+	-re "#\[0-9\]+\[\t \].*gdb_recursion_test.*depth=.*$gdb_prompt $" {
+	    fail "$msg (fewer than $depth stack frames found)"
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "$msg"
+	}
+	timeout { fail "$msg (timeout)" }
+    }
+}
+
+#
+# begin backtrace test
+#
+
+set timeout 60
+
+gdb_tfind_test "init: make sure not debugging any trace frame" "none" "-1"
+
+gdb_tfind_test "8.6: find start frame" "start" "0"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp2:" ""
+gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 1, collect nothing"
+
+gdb_tfind_test "8.6: find frame 1"     "1" "1"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp3:" ""
+gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 1, collect regs"
+
+gdb_tfind_test "8.6: find frame 2"     "2" "2"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp4:" ""
+gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 1, collect args and locals"
+
+
+gdb_tfind_test "8.6: find frame 4"     "4" "4"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp6:" ""
+gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"
+
+gdb_tfind_test "8.6: find frame 5"     "5" "5"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp2:" ""
+gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 2, collect nothing"
+
+gdb_tfind_test "8.6: find frame 6"     "6" "6"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp3:" ""
+gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 2, collect regs"
+
+gdb_tfind_test "8.6: find frame 7"     "7" "7"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp4:" ""
+gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 2, collect args and locals"
+
+
+gdb_tfind_test "8.6: find frame 9"     "9" "9"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp6:" ""
+gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"
+
+gdb_tfind_test "8.6: find frame 10"    "10" "10"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp2:" ""
+gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 3, collect nothing"
+
+gdb_tfind_test "8.6: find frame 11"    "11" "11"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp3:" ""
+gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 3, collect regs"
+
+gdb_tfind_test "8.6: find frame 12"    "12" "12"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp4:" ""
+gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 3, collect args and locals"
+
+
+gdb_tfind_test "8.6: find frame 14"    "14" "14"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp6:" ""
+gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"
+
+gdb_tfind_test "8.6: find frame 15"    "15" "15"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp2:" ""
+gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 4, collect nothing"
+
+gdb_tfind_test "8.6: find frame 16"    "16" "16"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp3:" ""
+gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 4, collect regs"
+
+gdb_tfind_test "8.6: find frame 17"    "17" "17"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp4:" ""
+gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 4, collect args and locals"
+
+
+gdb_tfind_test "8.6: find frame 19"    "19" "19"
+gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
+	"TDP $tdp6:" ""
+gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"
+
+gdb_test "printf \"x \%d x\\n\", depth == 3" \
+	"x 0 x" \
+	"1.13: trace in recursion: depth not equal to 3"
+
+# Finished!
+gdb_test "tfind none" "" ""
diff --git a/gdb/testsuite/gdb.trace/circ.c b/gdb/testsuite/gdb.trace/circ.c
new file mode 100644
index 0000000..98a2ce6
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/circ.c
@@ -0,0 +1,90 @@
+/*
+ * Test program for tracing; circular buffer
+ */
+
+int n = 6;
+
+int testload[13];
+
+static void func0(void)
+{
+}
+
+static void func1(void)
+{
+}
+
+static void func2(void)
+{
+}
+
+static void func3(void)
+{
+}
+
+static void func4(void)
+{
+}
+
+static void func5(void)
+{
+}
+
+static void func6(void)
+{
+}
+
+static void func7(void)
+{
+}
+
+static void func8(void)
+{
+}
+
+static void func9(void)
+{
+}
+
+static void begin ()	/* called before anything else */
+{
+}
+
+static void end ()	/* called after everything else */
+{
+}
+
+int
+main (argc, argv, envp)
+     int argc;
+     char *argv[], **envp;
+{
+  int i;
+
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+
+  begin ();
+  for (i = 0; i < sizeof(testload) / sizeof(testload[0]); i++)
+    testload[i] = i + 1;
+
+  func0 ();
+  func1 ();
+  func2 ();
+  func3 ();
+  func4 ();
+  func5();
+  func6 ();
+  func7 ();
+  func8 ();
+  func9 ();
+
+  end ();
+
+#ifdef usestubs
+  breakpoint ();
+#endif
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.trace/circ.exp b/gdb/testsuite/gdb.trace/circ.exp
new file mode 100644
index 0000000..ff1724f
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/circ.exp
@@ -0,0 +1,215 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if [istarget "m68k-*-elf"] then {
+    pass "Test not supported on this target"
+    return;
+}
+
+load_lib "trace-support.exp"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "circ"
+set srcfile ${testfile}.c
+set binfile $objdir/$subdir/$testfile
+
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Tests:
+# 1) Set up a trace experiment that will collect approximately 10 frames,
+#    requiring more than 512 but less than 1024 bytes of cache buffer.
+#    (most targets should have at least 1024 bytes of cache buffer!)
+#    Run and confirm that it collects all 10 frames.
+# 2) Artificially limit the trace buffer to 512 bytes, and rerun the
+#    experiment.  Confirm that the first several frames are collected,
+#    but that the last several are not.
+# 3) Set trace buffer to circular mode, still with the artificial limit
+#    of 512 bytes, and rerun the experiment.  Confirm that the last 
+#    several frames are collected, but the first several are not.
+#
+
+# return 0 for success, 1 for failure
+proc run_trace_experiment { pass } {
+    gdb_run_cmd 
+
+    if [gdb_test "tstart" \
+	    "\[\r\n\]*" \
+	    "start trace experiment, pass $pass"] then { return 1; }
+    if [gdb_test "continue" \
+	    "Continuing.*Breakpoint \[0-9\]+, end.*" \
+	    "run to end, pass $pass"] then { return 1; }
+    if [gdb_test "tstop" \
+	    "\[\r\n\]*" \
+	    "stop trace experiment, pass $pass"] then { return 1; }
+    return 0;
+}
+
+# return 0 for success, 1 for failure
+proc set_a_tracepoint { func } {
+    if [gdb_test "trace $func" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "set tracepoint at $func"] then {
+	return 1;
+    }
+    if [gdb_trace_setactions "set actions for $func" \
+	    "" \
+	    "collect testload" "^$"] then {
+	return 1;
+    }
+    return 0;
+}
+
+# return 0 for success, 1 for failure
+proc setup_tracepoints { } {
+    gdb_delete_tracepoints
+    if [set_a_tracepoint func0] then { return 1; }
+    if [set_a_tracepoint func1] then { return 1; }
+    if [set_a_tracepoint func2] then { return 1; }
+    if [set_a_tracepoint func3] then { return 1; }
+    if [set_a_tracepoint func4] then { return 1; }
+    if [set_a_tracepoint func5] then { return 1; }
+    if [set_a_tracepoint func6] then { return 1; }
+    if [set_a_tracepoint func7] then { return 1; }
+    if [set_a_tracepoint func8] then { return 1; }
+    if [set_a_tracepoint func9] then { return 1; }
+    return 0;
+}
+
+# return 0 for success, 1 for failure
+proc trace_buffer_normal { } {
+    if [gdb_test "maint packet QTBuffer:size:ffffffff" \
+	    "received: .OK." ""] then { 
+	pass "This test cannot be run on this target"
+	return 1;
+    }
+    if [gdb_test "maint packet QTBuffer:circular:0" \
+	    "received: .OK." ""] then { 
+	pass "This test cannot be run on this target"
+	return 1;
+    }
+    return 0;
+}
+
+# return 0 for success, 1 for failure
+proc gdb_trace_circular_tests { } {
+
+    # We generously give ourselves one "pass" if we successfully 
+    # detect that this test cannot be run on this target!
+    if { ![gdb_target_supports_trace] } then { 
+	pass "Current target does not supporst trace"
+	return 1;
+    }
+
+    if [trace_buffer_normal] then { return 1; }
+
+    gdb_test "break begin" "" ""
+    gdb_test "break end"   "" ""
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+
+    if [setup_tracepoints] then { return 1; }
+
+    # First, run the trace experiment with default attributes:
+    # Make sure it behaves as expected.
+    if [run_trace_experiment 1] then { return 1; }
+    if [gdb_test "tfind start" \
+	    "#0  func0 .*" \
+	    "find frame zero, pass 1"] then { return 1; }
+
+    if [gdb_test "tfind 9" \
+	    "#0  func9 .*" \
+	    "find frame nine, pass 1"] then { return 1; }
+
+    if [gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "quit trace debugging, pass 1"] then { return 1; }
+
+    # Then, shrink the trace buffer so that it will not hold
+    # all ten trace frames.  Verify that frame zero is still
+    # collected, but frame nine is not.
+    if [gdb_test "maint packet QTBuffer:size:200" \
+	    "received: .OK." "shrink the target trace buffer"] then { 
+	return 1;
+    }
+    if [run_trace_experiment 2] then { return 1; }
+    if [gdb_test "tfind start" \
+	    "#0  func0 .*" \
+	    "find frame zero, pass 2"] then { return 1; }
+
+    if [gdb_test "tfind 9" \
+	    ".* failed to find .*" \
+	    "fail to find frame nine, pass 2"] then { return 1; }
+
+    if [gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "quit trace debugging, pass 2"] then { return 1; }
+
+    # Finally, make the buffer circular.  Now when it runs out of
+    # space, it should wrap around and overwrite the earliest frames.
+    # This means that:
+    #   1) frame zero will be overwritten and therefore unavailable
+    #   2) the earliest frame in the buffer will be other-than-zero
+    #   3) frame nine will be available (unlike on pass 2).
+    if [gdb_test "maint packet QTBuffer:circular:1" \
+	    "received: .OK." "make the target trace buffer circular"] then { 
+	return 1;
+    }
+    if [run_trace_experiment 3] then { return 1; }
+    if [gdb_test "tfind start" \
+	    "#0  func\[1-9\] .*" \
+	    "first frame is NOT frame zero, pass 3"] then { return 1; }
+
+    if [gdb_test "tfind 9" \
+	    "#0  func9 .*" \
+	    "find frame nine, pass 3"] then { return 1; }
+
+    if [gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "quit trace debugging, pass 3"] then { return 1; }
+
+    return 0;
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+ 
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+# Body of test encased in a proc so we can return prematurely.
+if { ![gdb_trace_circular_tests] } then {
+    # Set trace buffer attributes back to normal
+    trace_buffer_normal;
+}
+
+# Finished!
+gdb_test "tfind none" "" ""
diff --git a/gdb/testsuite/gdb.trace/collection.c b/gdb/testsuite/gdb.trace/collection.c
new file mode 100644
index 0000000..3986332
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/collection.c
@@ -0,0 +1,280 @@
+/*
+ * Test program for trace collection
+ */
+
+/*
+ * Typedefs
+ */
+
+typedef struct TEST_STRUCT {
+  char   memberc;
+  int    memberi;
+  float  memberf;
+  double memberd;
+} test_struct;
+
+typedef int test_array [4];
+
+/* 
+ * Global variables to be collected
+ */
+
+char         globalc;
+int          globali;
+float        globalf;
+double       globald;
+test_struct  globalstruct;
+test_struct *globalp;
+int          globalarr[16];
+
+/*
+ * Additional globals used in arithmetic tests
+ */
+
+signed char  c0,  c1,  c2,  c3,  c4,  c5,  c6,  c7, 
+             c8,  c9,  c10, c11, c12, c13, c14, c15, cminus;
+signed short s0,  s1,  s2,  s3,  s4,  s5,  s6,  s7,
+             s8,  s9,  s10, s11, s12, s13, s14, s15, sminus;
+signed long  l0,  l1,  l2,  l3,  l4,  l5,  l6,  l7,
+             l8,  l9,  l10, l11, l12, l13, l14, l15, lminus;
+
+
+/*
+ * Test functions
+ */
+
+static void begin ()	/* called before anything else */
+{
+}
+
+static void end ()	/* called after everything else */
+{
+}
+
+/* Test collecting args. */
+int args_test_func (argc, argi, argf, argd, argstruct, argarray)
+     char   argc;
+     int    argi;
+     float  argf;
+     double argd;
+     test_struct argstruct;
+     int argarray[4];
+{
+  int i;
+
+  i =  (int) argc + argi + argf + argd + argstruct.memberi + argarray[1];
+
+  return i;
+}
+
+/* Test collecting struct args. */
+int argstruct_test_func (argstruct)
+     test_struct argstruct;
+{
+  return (int) argstruct.memberc + argstruct.memberi + 
+                 argstruct.memberf + argstruct.memberd;
+}
+
+/* Test collecting array args. */
+int argarray_test_func (argarray)
+     int argarray[4];
+{
+  return (int) argarray[0] + argarray[1] + argarray[2] + argarray[3];
+}
+
+
+
+int local_test_func ()			/* test collecting locals */
+{
+  char        locc  = 11;
+  int         loci  = 12;
+  float       locf  = 13.3;
+  double      locd  = 14.4;
+  test_struct locst;
+  int         locar[4];
+  int         i;
+
+  locst.memberc  = 15;
+  locst.memberi  = 16;
+  locst.memberf  = 17.7;
+  locst.memberd  = 18.8;
+  locar[0] = 121;
+  locar[1] = 122;
+  locar[2] = 123;
+  locar[3] = 124;
+
+  i = /* Set_Tracepoint_Here */
+    (int) locc + loci + locf + locd + locst.memberi + locar[1];
+
+  return i;
+}
+
+int reglocal_test_func ()		/* test collecting register locals */
+{
+  register char        locc = 11;
+  register int         loci = 12;
+  register float       locf = 13.3;
+  register double      locd = 14.4;
+  register test_struct locst;
+  register int         locar[4];
+  int                  i;
+
+  locst.memberc  = 15;
+  locst.memberi  = 16;
+  locst.memberf  = 17.7;
+  locst.memberd  = 18.8;
+  locar[0] = 121;
+  locar[1] = 122;
+  locar[2] = 123;
+  locar[3] = 124;
+
+  i = /* Set_Tracepoint_Here */
+    (int) locc + loci + locf + locd + locst.memberi + locar[1];
+
+  return i;
+}
+
+int statlocal_test_func ()		/* test collecting static locals */
+{
+  static   char        locc;
+  static   int         loci;
+  static   float       locf;
+  static   double      locd;
+  static   test_struct locst;
+  static   int         locar[4];
+  int                  i;
+
+  locc = 11;
+  loci = 12;
+  locf = 13.3;
+  locd = 14.4;
+  locst.memberc = 15;
+  locst.memberi = 16;
+  locst.memberf = 17.7;
+  locst.memberd = 18.8;
+  locar[0] = 121;
+  locar[1] = 122;
+  locar[2] = 123;
+  locar[3] = 124;
+
+  i = /* Set_Tracepoint_Here */
+    (int) locc + loci + locf + locd + locst.memberi + locar[1];
+
+  /* Set static locals back to zero so collected values are clearly special. */
+  locc = 0;
+  loci = 0;
+  locf = 0;
+  locd = 0;
+  locst.memberc = 0;
+  locst.memberi = 0;
+  locst.memberf = 0;
+  locst.memberd = 0;
+  locar[0] = 0;
+  locar[1] = 0;
+  locar[2] = 0;
+  locar[3] = 0;
+
+  return i;
+}
+
+
+int globals_test_func ()
+{
+  int i = 0;
+
+  i += globalc + globali + globalf + globald;
+  i += globalstruct.memberc + globalstruct.memberi;
+  i += globalstruct.memberf + globalstruct.memberd;
+  i += globalarr[1];
+
+  return i;	/* Set_Tracepoint_Here */
+}
+
+int
+main (argc, argv, envp)
+     int argc;
+     char *argv[], **envp;
+{
+  int         i = 0;
+  test_struct mystruct;
+  int         myarray[4];
+
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+
+  begin ();
+  /* Assign collectable values to global variables. */
+  l0  = s0  = c0  = 0;     l1  = s1  = c1  = 1;
+  l2  = s2  = c2  = 2;     l3  = s3  = c3  = 3;
+  l4  = s4  = c4  = 4;     l5  = s5  = c5  = 5;
+  l6  = s6  = c6  = 6;     l7  = s7  = c7  = 7;
+  l8  = s8  = c8  = 8;     l9  = s9  = c9  = 9;
+  l10 = s10 = c10 = 10;    l11 = s11 = c11 = 11;
+  l12 = s12 = c12 = 12;    l13 = s13 = c13 = 13;
+  l14 = s14 = c14 = 14;    l15 = s15 = c15 = 15;
+  lminus = sminus = cminus = -2;
+  globalc = 71;
+  globali = 72;
+  globalf = 73.3;
+  globald = 74.4;
+  globalstruct.memberc = 81;
+  globalstruct.memberi = 82;
+  globalstruct.memberf = 83.3;
+  globalstruct.memberd = 84.4;
+  globalp = &globalstruct;
+
+  for (i = 0; i < 15; i++)
+    globalarr[i] = i;
+
+  mystruct.memberc = 101;
+  mystruct.memberi = 102;
+  mystruct.memberf = 103.3;
+  mystruct.memberd = 104.4;
+  myarray[0] = 111;
+  myarray[1] = 112;
+  myarray[2] = 113;
+  myarray[3] = 114;
+
+  /* Call test functions, so they can be traced and data collected.  */
+  i = 0;
+  i += args_test_func (1, 2, 3.3, 4.4, mystruct, myarray);
+  i += argstruct_test_func (mystruct);
+  i += argarray_test_func (myarray);
+  i += local_test_func ();
+  i += reglocal_test_func ();
+  i += statlocal_test_func ();
+  i += globals_test_func ();
+
+  /* Values of globals at end of test should be different from
+     values that they had when trace data was captured.  */
+
+  l0  = s0  = c0  = 0;     l1  = s1  = c1  = 0;
+  l2  = s2  = c2  = 0;     l3  = s3  = c3  = 0;
+  l4  = s4  = c4  = 0;     l5  = s5  = c5  = 0;
+  l6  = s6  = c6  = 0;     l7  = s7  = c7  = 0;
+  l8  = s8  = c8  = 0;     l9  = s9  = c9  = 0;
+  l10 = s10 = c10 = 0;     l11 = s11 = c11 = 0;
+  l12 = s12 = c12 = 0;     l13 = s13 = c13 = 0;
+  l14 = s14 = c14 = 0;     l15 = s15 = c15 = 0;
+  lminus = sminus = cminus = 0;
+
+  /* Set 'em back to zero, so that the collected values will be
+     distinctly different from the "realtime" (end of test) values.  */
+
+  globalc = 0;
+  globali = 0;
+  globalf = 0;
+  globald = 0;
+  globalstruct.memberc = 0;
+  globalstruct.memberi = 0;
+  globalstruct.memberf = 0;
+  globalstruct.memberd = 0;
+  globalp = 0;
+  for (i = 0; i < 15; i++)
+    globalarr[i] = 0;
+
+  end ();
+  return 0;
+}
diff --git a/gdb/testsuite/gdb.trace/collection.exp b/gdb/testsuite/gdb.trace/collection.exp
new file mode 100644
index 0000000..8cd7577
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/collection.exp
@@ -0,0 +1,623 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if [istarget "m68k-*-elf"] then {
+    pass "Test not supported on this target"
+    return;
+}
+
+load_lib "trace-support.exp"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "collection"
+set srcfile ${testfile}.c
+set binfile $objdir/$subdir/$testfile
+
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Tests: 
+# 1) $args
+# 2) function args by name
+# 3) $locs
+# 4) function locals by name
+# 5) $regs
+# 6) registers by name ($sp, $fp?)
+# 7) globals by name
+# 8) expressions (lots of different kinds: local and global)
+
+set ws "\[\r\n\t \]+"
+set cr "\[\r\n\]+"
+
+#
+# Utility procs
+#
+
+proc test_register { reg test_id } {
+    global cr
+    global gdb_prompt
+
+    send_gdb "print $reg\n"
+    gdb_expect {
+	-re "\\$\[0-9\]+ = \[x0\]+$cr$gdb_prompt " {
+	    fail "collect $test_id: collected $reg (zero)"
+	}
+	-re "\\$\[0-9\]+ = \[x0-9a-fA-F\]+$cr$gdb_prompt " {
+	    pass "collect $test_id: collected $reg"
+	}
+	-re "\[Ee\]rror.*$gdb_prompt " {
+	    fail "collect $test_id: collected $reg (error)"
+	}
+	timeout {
+	    fail "collect $test_id: collected $reg (timeout)"
+	}
+    }
+}
+
+proc run_trace_experiment { msg test_func } {
+    gdb_run_cmd 
+    gdb_test "tstart" \
+	    "\[\r\n\]+" \
+	    "collect $msg: start trace experiment"
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint \[0-9\]+, end.*" \
+	    "collect $msg: run trace experiment"
+    gdb_test "tstop" \
+	    "\[\r\n\]+" \
+	    "collect $msg: stop trace experiment"
+    gdb_test "tfind start" \
+	    "#0  $test_func .*" \
+	    "collect $msg: tfind test frame"
+}
+
+
+#
+# Test procs
+#
+
+proc gdb_collect_args_test { myargs msg } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    gdb_test "trace args_test_func" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $msg: set tracepoint"
+    gdb_trace_setactions "collect $msg: define actions" \
+	    "" \
+	    "collect $myargs" "^$"
+
+    # Begin the test.
+    run_trace_experiment $msg args_test_func
+
+    gdb_test "print argc" \
+	    "\\$\[0-9\]+ = 1 '.001'$cr" \
+	    "collect $msg: collected arg char"
+    gdb_test "print argi" \
+	    "\\$\[0-9\]+ = 2$cr" \
+	    "collect $msg: collected arg int"
+    gdb_test "print argf" \
+	    "\\$\[0-9\]+ = 3.\[23\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg float"
+    gdb_test "print argd" \
+	    "\\$\[0-9\]+ = 4.\[34\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg double"
+
+    # struct arg as one of several args (near end of list)
+    gdb_test "print argstruct.memberc" \
+	    "\\$\[0-9\]+ = 101 'e'$cr" \
+	    "collect $msg: collected arg struct member char"
+    gdb_test "print argstruct.memberi" \
+	    "\\$\[0-9\]+ = 102$cr" \
+	    "collect $msg: collected arg struct member int"
+    gdb_test "print argstruct.memberf" \
+	    "\\$\[0-9\]+ = 103.\[23\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg struct member float"
+    gdb_test "print argstruct.memberd" \
+	    "\\$\[0-9\]+ = 104.\[34\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg struct member double"
+
+    # array arg as one of several args (near end of list)
+    gdb_test "print argarray\[0\]" \
+	    "\\$\[0-9\]+ = 111$cr" \
+	    "collect $msg: collected argarray #0"
+    gdb_test "print argarray\[1\]" \
+	    "\\$\[0-9\]+ = 112$cr" \
+	    "collect $msg: collected argarray #1"
+    gdb_test "print argarray\[2\]" \
+	    "\\$\[0-9\]+ = 113$cr" \
+	    "collect $msg: collected argarray #2"
+    gdb_test "print argarray\[3\]" \
+	    "\\$\[0-9\]+ = 114$cr" \
+	    "collect $msg: collected argarray #3"
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $msg: cease trace debugging"
+}
+
+proc gdb_collect_argstruct_test { myargs msg } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    gdb_test "trace argstruct_test_func" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $msg: set tracepoint"
+    gdb_trace_setactions "collect $msg: define actions" \
+	    "" \
+	    "collect $myargs" "^$"
+
+    # Begin the test.
+    run_trace_experiment $msg argstruct_test_func
+
+    # struct argument as only argument
+    gdb_test "print argstruct.memberc" \
+	    "\\$\[0-9\]+ = 101 'e'$cr" \
+	    "collect $msg: collected arg struct member char"
+    gdb_test "print argstruct.memberi" \
+	    "\\$\[0-9\]+ = 102$cr" \
+	    "collect $msg: collected arg struct member int"
+    gdb_test "print argstruct.memberf" \
+	    "\\$\[0-9\]+ = 103.\[23\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg struct member float"
+    gdb_test "print argstruct.memberd" \
+	    "\\$\[0-9\]+ = 104.\[34\]\[0-9\]*$cr" \
+	    "collect $msg: collected arg struct member double"
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $msg: cease trace debugging"
+}
+
+
+proc gdb_collect_argarray_test { myargs msg } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    gdb_test "trace argarray_test_func" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $msg: set tracepoint"
+    gdb_trace_setactions "collect $msg: define actions" \
+	    "" \
+	    "collect $myargs" "^$"
+
+    # Begin the test.
+    run_trace_experiment $msg argarray_test_func
+
+    # array arg as only argument
+    gdb_test "print argarray\[0\]" \
+	    "\\$\[0-9\]+ = 111$cr" \
+	    "collect $msg: collected argarray #0"
+    gdb_test "print argarray\[1\]" \
+	    "\\$\[0-9\]+ = 112$cr" \
+	    "collect $msg: collected argarray #1"
+    gdb_test "print argarray\[2\]" \
+	    "\\$\[0-9\]+ = 113$cr" \
+	    "collect $msg: collected argarray #2"
+    gdb_test "print argarray\[3\]" \
+	    "\\$\[0-9\]+ = 114$cr" \
+	    "collect $msg: collected argarray #3"
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $msg: cease trace debugging"
+}
+
+
+proc gdb_collect_locals_test { func mylocs msg } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Find the comment-identified line for setting this tracepoint.
+    set testline 0
+    send_gdb "list $func, +30\n"
+    gdb_expect {
+	-re "\[\r\n\](\[0-9\]+)\[^\r\n\]+ Set_Tracepoint_Here .*$gdb_prompt" {
+	    set testline $expect_out(1,string)
+	    pass "collect $msg: find tracepoint line"
+	}
+	-re ".*$gdb_prompt " {
+	    fail "collect $msg: find tracepoint line (skipping locals test)"
+	    return
+	}
+	timeout {
+	    fail "collect $msg: find tracepoint line (skipping locals test)"
+	    return
+	}
+    }
+
+    gdb_test "trace $testline" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $msg: set tracepoint"
+    gdb_trace_setactions "collect $msg: define actions" \
+	    "" \
+	    "collect $mylocs" "^$"
+
+    # Begin the test.
+    run_trace_experiment $msg $func
+
+    gdb_test "print locc" \
+	    "\\$\[0-9\]+ = 11 '.013'$cr" \
+	    "collect $msg: collected local char"
+    gdb_test "print loci" \
+	    "\\$\[0-9\]+ = 12$cr" \
+	    "collect $msg: collected local int"
+    gdb_test "print locf" \
+	    "\\$\[0-9\]+ = 13.\[23\]\[0-9\]*$cr" \
+	    "collect $msg: collected local float"
+    gdb_test "print locd" \
+	    "\\$\[0-9\]+ = 14.\[34\]\[0-9\]*$cr" \
+	    "collect $msg: collected local double"
+
+    gdb_test "print locst.memberc" \
+	    "\\$\[0-9\]+ = 15 '.017'$cr" \
+	    "collect $msg: collected local member char"
+    gdb_test "print locst.memberi" \
+	    "\\$\[0-9\]+ = 16$cr" \
+	    "collect $msg: collected local member int"
+    gdb_test "print locst.memberf" \
+	    "\\$\[0-9\]+ = 17.\[67\]\[0-9\]*$cr" \
+	    "collect $msg: collected local member float"
+    gdb_test "print locst.memberd" \
+	    "\\$\[0-9\]+ = 18.\[78\]\[0-9\]*$cr" \
+	    "collect $msg: collected local member double"
+
+    gdb_test "print locar\[0\]" \
+	    "\\$\[0-9\]+ = 121$cr" \
+	    "collect $msg: collected locarray #0"
+    gdb_test "print locar\[1\]" \
+	    "\\$\[0-9\]+ = 122$cr" \
+	    "collect $msg: collected locarray #1"
+    gdb_test "print locar\[2\]" \
+	    "\\$\[0-9\]+ = 123$cr" \
+	    "collect $msg: collected locarray #2"
+    gdb_test "print locar\[3\]" \
+	    "\\$\[0-9\]+ = 124$cr" \
+	    "collect $msg: collected locarray #3"
+	    
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $msg: cease trace debugging"
+}
+
+proc gdb_collect_registers_test { myregs } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # We'll simply re-use the args_test_function for this test
+    gdb_test "trace args_test_func" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $myregs: set tracepoint"
+    gdb_trace_setactions "collect $myregs: define actions" \
+	    "" \
+	    "collect $myregs" "^$"
+
+    # Begin the test.
+    run_trace_experiment $myregs args_test_func
+
+    test_register "\$fp" $myregs
+    test_register "\$sp" $myregs
+    test_register "\$pc" $myregs
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $myregs: cease trace debugging"
+}
+
+proc gdb_collect_expression_test { func expr val msg } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Find the comment-identified line for setting this tracepoint.
+    set testline 0
+    send_gdb "list $func, +30\n"
+    gdb_expect {
+	-re "\[\r\n\](\[0-9\]+)\[^\r\n\]+ Set_Tracepoint_Here .*$gdb_prompt" {
+	    set testline $expect_out(1,string)
+	    pass "collect $msg: find tracepoint line"
+	}
+	-re ".*$gdb_prompt " {
+	    fail "collect $msg: find tracepoint line (skipping locals test)"
+	    return
+	}
+	timeout {
+	    fail "collect $msg: find tracepoint line (skipping locals test)"
+	    return
+	}
+    }
+
+    gdb_test "trace $testline" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect $msg: set tracepoint"
+    gdb_trace_setactions "collect $msg: define actions" \
+	    "" \
+	    "collect $expr" "^$"
+
+    # Begin the test.
+    run_trace_experiment $msg $func
+
+    gdb_test "print $expr" \
+	    "\\$\[0-9\]+ = $val$cr" \
+	    "collect $msg: got expected value '$val'"
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect $msg: cease trace debugging"
+}
+
+proc gdb_collect_globals_test { } {
+    global cr
+    global gdb_prompt
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Find the comment-identified line for setting this tracepoint.
+    set testline 0
+    send_gdb "list globals_test_func, +30\n"
+    gdb_expect {
+	-re "\[\r\n\](\[0-9\]+)\[^\r\n\]+ Set_Tracepoint_Here .*$gdb_prompt" {
+	    set testline $expect_out(1,string)
+	    pass "collect globals: find tracepoint line"
+	}
+	-re ".*$gdb_prompt " {
+	    fail "collect globals: find tracepoint line (skipping global test)"
+	    return
+	}
+	timeout {
+	    fail "collect globals: find tracepoint line (skipping global test)"
+	    return
+	}
+    }
+
+    gdb_test "trace $testline" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "collect globals: set tracepoint"
+    gdb_trace_setactions "collect globals: define actions" \
+	    "" \
+	    "collect globalc, globali, globalf, globald" "^$" \
+	    "collect globalstruct, globalp, globalarr" "^$"
+
+    # Begin the test.
+    run_trace_experiment "globals" globals_test_func
+
+    gdb_test "print globalc" \
+	    "\\$\[0-9\]+ = 71 'G'$cr" \
+	    "collect globals: collected global char"
+    gdb_test "print globali" \
+	    "\\$\[0-9\]+ = 72$cr" \
+	    "collect globals: collected global int"
+    gdb_test "print globalf" \
+	    "\\$\[0-9\]+ = 73.\[23\]\[0-9\]*$cr" \
+	    "collect globals: collected global float"
+    gdb_test "print globald" \
+	    "\\$\[0-9\]+ = 74.\[34\]\[0-9\]*$cr" \
+	    "collect globals: collected global double"
+
+    gdb_test "print globalstruct.memberc" \
+	    "\\$\[0-9\]+ = 81 'Q'$cr" \
+	    "collect globals: collected struct char member"
+    gdb_test "print globalstruct.memberi" \
+	    "\\$\[0-9\]+ = 82$cr" \
+	    "collect globals: collected struct member int"
+    gdb_test "print globalstruct.memberf" \
+	    "\\$\[0-9\]+ = 83.\[23\]\[0-9\]*$cr" \
+	    "collect globals: collected struct member float"
+    gdb_test "print globalstruct.memberd" \
+	    "\\$\[0-9\]+ = 84.\[34\]\[0-9\]*$cr" \
+	    "collect globals: collected struct member double"
+
+    gdb_test "print globalp == &globalstruct" \
+	    "\\$\[0-9\]+ = 1$cr" \
+	    "collect globals: collected global pointer"
+
+    gdb_test "print globalarr\[1\]" \
+	    "\\$\[0-9\]+ = 1$cr" \
+	    "collect globals: collected global array element #1"
+    gdb_test "print globalarr\[2\]" \
+	    "\\$\[0-9\]+ = 2$cr" \
+	    "collect globals: collected global array element #2"
+    gdb_test "print globalarr\[3\]" \
+	    "\\$\[0-9\]+ = 3$cr" \
+	    "collect globals: collected global array element #3"
+
+    gdb_test "tfind none" \
+	    "#0  end .*" \
+	    "collect globals: cease trace debugging"
+}
+
+proc gdb_trace_collection_test { } {
+    global gdb_prompt;
+
+    gdb_test "set width 0" "" ""
+    delete_breakpoints
+
+    # We generously give ourselves one "pass" if we successfully 
+    # detect that this test cannot be run on this target!
+    if { ![gdb_target_supports_trace] } then { 
+	pass "Current target does not supporst trace"
+	return 1;
+    }
+
+    gdb_test "break begin" "" ""
+    gdb_test "break end"   "" ""
+    gdb_collect_args_test "\$args" \
+	    "args collectively"
+    gdb_collect_args_test "argc, argi, argf, argd, argstruct, argarray" \
+	    "args individually"
+    gdb_collect_argstruct_test "\$args" \
+	    "argstruct collectively"
+    gdb_collect_argstruct_test "argstruct" \
+	    "argstruct individually"
+    gdb_collect_argarray_test "\$args" \
+	    "argarray collectively"
+    gdb_collect_argarray_test "argarray" \
+	    "argarray individually"
+    gdb_collect_locals_test local_test_func "\$locals" \
+	    "auto locals collectively"
+    gdb_collect_locals_test local_test_func \
+	    "locc, loci, locf, locd, locst, locar" \
+	    "auto locals individually"
+    gdb_collect_locals_test reglocal_test_func "\$locals" \
+	    "register locals collectively"
+    gdb_collect_locals_test reglocal_test_func \
+	    "locc, loci, locf, locd, locst, locar" \
+	    "register locals individually"
+    gdb_collect_locals_test statlocal_test_func "\$locals" \
+	    "static locals collectively"
+    gdb_collect_locals_test statlocal_test_func \
+	    "locc, loci, locf, locd, locst, locar" \
+	    "static locals individually"
+    
+    gdb_collect_registers_test "\$regs"
+    gdb_collect_registers_test "\$fp, \$sp, \$pc"
+    gdb_collect_globals_test
+    
+    #
+    # Expression tests:
+    #
+    # *x	(**x, ...)
+    # x.y	(x.y.z, ...)
+    # x->y	(x->y->z, ...)
+    # x[2]	(x[2][3], ...) (const index)
+    # x[y]	(x[y][z], ...) (index to be char, short, long, float, double)
+    #  NOTE:
+    #  We test the following operators by using them in an array index
+    #  expression -- because the naked result of an operator is not really
+    #  collected.  To be sure the operator was evaluated correctly on the
+    #  target, we have to actually use the result eg. in an array offset
+    #  calculation.
+    # x[y +  z] (tests addition: y and z various combos of types, sclasses)
+    # x[y -  z] (tests subtraction) (ditto)
+    # x[y *  z] (tests multiplication) (ditto)
+    # x[y /  z] (tests division) (ditto)
+    # x[y %  z] (tests modulo division) (ditto)
+    # x[y == z] (tests equality relation) (ditto)              UNSUPPORTED
+    # x[y != z] (tests inequality relation) (ditto)            UNSUPPORTED
+    # x[y >  z] (tests greater-than relation) (ditto)          UNSUPPORTED
+    # x[y <  z] (tests less-than relation) (ditto)             UNSUPPORTED
+    # x[y >= z] (tests greater-than-or-equal relation) (ditto) UNSUPPORTED
+    # x[y <= z] (tests less-than-or-equal relation) (ditto)    UNSUPPORTED
+    # x[y && z] (tests logical and) (ditto)                    UNSUPPORTED
+    # x[y || z] (tests logical or) (ditto)                     UNSUPPORTED
+    # x[y &  z] (tests binary and) (ditto)                     UNSUPPORTED
+    # x[y |  z] (tests binary or) (ditto)                      UNSUPPORTED
+    # x[y ^  z] (tests binary xor) (ditto)                     UNSUPPORTED
+    # x[y ? z1 : z2] (tests ternary operator) (ditto)          UNSUPPORTED
+    # x[y << z] (tests shift-left) (ditto)                     UNSUPPORTED
+    # x[y >> z] (tests shift-right) (ditto)                    UNSUPPORTED
+    # x[y =  z] (tests assignment operator) (ditto)            UNSUPPORTED
+    # x[++y]    (tests pre-increment operator) (ditto)         UNSUPPORTED
+    # x[--y]    (tests pre-decrement operator) (ditto)         UNSUPPORTED
+    # x[y++]    (tests post-increment operator) (ditto)        UNSUPPORTED
+    # x[y--]    (tests post-decrement operator) (ditto)        UNSUPPORTED
+    # x[+y]     (tests unary plus) (ditto)
+    # x[-y]     (tests unary minus) (ditto)
+    # x[!y]     (tests logical not) (ditto)                    UNSUPPORTED
+    # x[~y]     (tests binary not) (ditto)                     UNSUPPORTED
+    # x[(y, z)] (tests comma expression) (ditto)
+    # cast expr
+    # stack data
+    
+    gdb_collect_expression_test globals_test_func \
+	    "globalstruct.memberi"  "82"     "a.b"
+    gdb_collect_expression_test globals_test_func \
+	    "globalp->memberc"      "81 'Q'" "a->b"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[2\]"        "2"      "a\[2\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l3\]"       "3"      "a\[b\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l3 + l2\]"  "5"      "a\[b + c\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l3 - l2\]"  "1"      "a\[b - c\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l3 * l2\]"  "6"      "a\[b * c\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l6 / l3\]"  "2"      "a\[b / c\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[l7 % l3\]"  "1"      "a\[b % c\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[+l1\]"      "1"      "a\[+b\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[-lminus\]"  "2"      "a\[-b\]"
+    gdb_collect_expression_test globals_test_func \
+	    "globalarr\[\(l6, l7\)\]" "7"    "a\[\(b, c\)\]"
+
+}
+
+# Start with a fresh gdb.
+ 
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+ 
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+ 
+# Body of test encased in a proc so we can return prematurely.
+gdb_trace_collection_test
+
+# Finished!
+gdb_test "tfind none" "" ""
+
+
+
diff --git a/gdb/testsuite/gdb.trace/configure b/gdb/testsuite/gdb.trace/configure
new file mode 100755
index 0000000..4176205
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/configure
@@ -0,0 +1,899 @@
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.1"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=collection.c
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+CC=${CC-cc}
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../../.. $srcdir/`cd $srcdir;pwd`/../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@CC@%$CC%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
diff --git a/gdb/testsuite/gdb.trace/configure.in b/gdb/testsuite/gdb.trace/configure.in
new file mode 100644
index 0000000..6d0eae2
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/configure.in
@@ -0,0 +1,15 @@
+dnl Process this file file with autoconf to produce a configure script.
+dnl This file is a shell script fragment that supplies the information
+dnl necessary to tailor a template configure script into the configure
+dnl script appropriate for this directory.  For more information, check
+dnl any existing configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(collection.c)
+
+CC=${CC-cc}
+AC_SUBST(CC)
+AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../../..)
+AC_CANONICAL_SYSTEM
+
+AC_OUTPUT(Makefile)
diff --git a/gdb/testsuite/gdb.trace/deltrace.exp b/gdb/testsuite/gdb.trace/deltrace.exp
new file mode 100644
index 0000000..d3198ad
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/deltrace.exp
@@ -0,0 +1,269 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+set baseline [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+set testline1 [expr $baseline + 4]
+
+#
+# test "delete tracepoints" command
+#
+
+# 3.1 delete tracepoints (all)
+gdb_delete_tracepoints
+gdb_test "trace gdb_c_test"   "Tracepoint \[0-9\]+ at .*" "set tracepoint 1"
+gdb_test "trace gdb_asm_test" "Tracepoint \[0-9\]+ at .*" "set tracepoint 2"
+gdb_test "trace $testline1"   "Tracepoint \[0-9\]+ at .*" "set tracepoint 3"
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*\[0-9\]+\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_c_test.*\[0-9\]+\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*gdb_asm_test.*\[0-9\]+\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_recursion_test.*" \
+			"3.1a: set three tracepoints"
+
+send_gdb "delete tracepoints\n"
+gdb_expect 30 {
+    -re "Delete all tracepoints.*y or n.*$" {
+	send_gdb "y\n"
+	gdb_expect 30 {
+	    -re "$gdb_prompt $" {
+		pass "3.1b: delete all tracepoints"
+	    }
+	    timeout { fail "3.1b: delete all tracepoints (timeout)" }
+	}
+    }
+    -re "$gdb_prompt $" { # This should only happen if there are no tracepoints
+	fail "3.1b: delete all tracepoints (no tracepoints?)"
+    }
+    timeout { fail "3.1b: delete all tracepoints (timeout)" }
+}
+
+# 3.2 delete tracepoint <n>
+gdb_delete_tracepoints
+set trcpt1 [gdb_gettpnum gdb_c_test];
+set trcpt2 [gdb_gettpnum gdb_asm_test];
+set trcpt3 [gdb_gettpnum $testline1];
+if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in.*gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in.*gdb_recursion_test.*" \
+			"3.2a: set three tracepoints"
+
+#gdb_test "delete tracepoint $trcpt1" "" ""
+send_gdb "delete tracepoint $trcpt1\n"
+gdb_expect {
+    -re "No tracepoint number.*$gdb_prompt $" {
+	fail "3.2b: delete first tracepoint"
+    }
+    -re ".*\[Ee\]rror.*$gdb_prompt $" {
+	fail "3.2b: delete first tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.2b: delete first tracepoint"
+    }
+    timeout {
+	fail "3.2b: delete first tracepoint (timeout)"
+    }
+}
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "$trcpt1\[\t \]+y\[\t \]+0x.*in.*gdb_c_test.*$gdb_prompt $" {
+	fail "3.2c: verify delete first tracepoint (argh)"
+    }
+    -re "$trcpt2\[\t \]+y.*gdb_asm_test.*\[\r\n\t ]+$trcpt3\[\t \]+y.* in gdb_recursion_test at .*$gdb_prompt $" {
+	pass "3.2c: verify delete first tracepoint"
+    }
+    -re ".*$gdb_prompt $" {
+	fail "3.2c: verify delete first tracepoint (mumble)" 
+    }
+    timeout {
+	fail "3.2c: verify delete first tracepoint (timeout)"
+    }
+}
+
+#gdb_test "delete tracepoint $trcpt2" "" ""
+send_gdb "delete tracepoint $trcpt2\n"
+gdb_expect {
+    -re "No tracepoint number.*$gdb_prompt $" {
+	fail "3.2d: delete second tracepoint"
+    }
+    -re ".*\[Ee\]rror.*$gdb_prompt $" {
+	fail "3.2d: delete second tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.2d: delete second tracepoint"
+    }
+    timeout {
+	fail "3.2d: delete second tracepoint (timeout)"
+    }
+}
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "$trcpt1\[\t \]+y\[\t \]+0x.*in.*gdb_c_test.*$gdb_prompt $" {
+	fail "3.2e: verify delete second tracepoint"
+    }
+    -re "$trcpt2\[\t \]+y\[\t \]+0x.*in gdb_asm_test.*$gdb_prompt $" {
+	fail "3.2e: verify delete second tracepoint"
+    }
+    -re "$trcpt3\[\t \]+y\[\t \]+0x.*in gdb_recursion_test.*$gdb_prompt $" {
+	pass "3.2e: verify delete second tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	fail "3.2e: verify delete second tracepoint" 
+    }
+    timeout {
+	fail "3.2e: verify delete second tracepoint (timeout)"
+    }
+}
+
+#gdb_test "delete tracepoint $trcpt3" "" ""
+send_gdb "delete tracepoint $trcpt3\n"
+gdb_expect {
+    -re "No tracepoint number.*$gdb_prompt $" {
+	fail "3.2f: delete third tracepoint"
+    }
+    -re ".*\[Ee\]rror.*$gdb_prompt $" {
+	fail "3.2f: delete third tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.2f: delete third tracepoint"
+    }
+    timeout {
+	fail "3.2f: delete third tracepoint (timeout)"
+    }
+}
+
+# send_gdb "ARF! \\n\n"
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "$trcpt3\[\t \]+y\[\t \]+0x.*in gdb_recursion_test.*$gdb_prompt $" {
+	fail "3.2g: verify delete third tracepoint"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.2g: verify delete third tracepoint"
+    }
+    timeout {
+	fail "3.2g: verify delete third tracepoint (timeout)" 
+    }
+}
+
+# 3.3 delete three tracepoints at once
+gdb_delete_tracepoints
+set trcpt1 [gdb_gettpnum gdb_c_test];
+set trcpt2 [gdb_gettpnum gdb_asm_test];
+set trcpt3 [gdb_gettpnum $testline1];
+if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_recursion_test.*" \
+			"3.3a: set three tracepoints"
+
+#gdb_test "delete tracepoint $trcpt1 $trcpt2 $trcpt3" "" ""
+send_gdb "delete tracepoint $trcpt1 $trcpt2 $trcpt3\n"
+gdb_expect {
+    -re "No tracepoint number.*$gdb_prompt $" {
+	fail "3.3b: delete three tracepoints"
+    }
+    -re ".*\[Ee\]rror.*$gdb_prompt $" {
+	fail "3.3b: delete three tracepoints"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.3b: delete three tracepoints"
+    }
+    timeout {
+	fail "3.3b: delete three tracepoint (timeout)"
+    }
+}
+
+send_gdb "info tracepoints\n"
+gdb_expect {
+    -re "$trcpt1\[\t \]+y\[\t \]+0x.*in gdb_c_test.*$gdb_prompt $" {
+	fail "3.3c: verify delete three tracepoints (first one persists)"
+    }
+    -re "$trcpt2\[\t \]+y\[\t \]+0x.*in gdb_asm_test.*$gdb_prompt $" {
+	fail "3.3c: verify delete three tracepoints (second one persists)"
+    }
+    -re "$trcpt3\[\t \]+y\[\t \]+0x.*in gdb_recursion_test.*$gdb_prompt $" {
+	fail "3.3c: verify delete three tracepoints (third one persists)"
+    }
+    -re "$gdb_prompt $" {
+	pass "3.3c: verify delete three tracepoints" 
+    }
+    timeout { 
+	fail "3.3c: verify delete three tracepoints (timeout)"
+    }
+}
+
+# 3.4 delete invalid tracepoint number
+gdb_test "delete tracepoint [expr $trcpt2 + $trcpt3]" \
+    "No tracepoint number [expr $trcpt2 + $trcpt3]." \
+			"3.4: delete invalid tracepoint number"
+
+# 3.5 delete tracepoint number zero
+gdb_test "delete tracepoint 0" "No tracepoint number 0." \
+			"3.5: delete tracepoint number zero"
+
+# 3.6 help delete tracepoints
+gdb_test "help delete tracepoints" \
+    "Delete specified tracepoints.*" \
+			"3.6: help delete tracepoints"
diff --git a/gdb/testsuite/gdb.trace/gdb_c_test.c b/gdb/testsuite/gdb.trace/gdb_c_test.c
new file mode 100644
index 0000000..6447fb1
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/gdb_c_test.c
@@ -0,0 +1,3792 @@
+/*
+ ******************************************************************************
+ ******************************************************************************
+ *
+ * COPYRIGHT (C) by EMC Corporation, 1997 All rights reserved.
+ * $Id$
+ * DESCRIPTION: This module has been provided for the purpose of testing GDB.
+ *
+ * NOTES:
+ *
+ ******************************************************************************
+ *****************************************************************************/
+
+/*=============================================================================
+ *                                  INCLUDE  FILES
+ *===========================================================================*/
+
+
+#ifdef DO_IT_BY_THE_BOOK
+
+
+#include "symtypes_defs.h"
+#include "printp.h"
+
+#include "adbg_expression.h"
+#include "common_hw_ds.h"
+#include "common_hw_defs.h"
+#include "evnttrac.h"
+#include "sym_scratch_ds.h"
+#include "symglob_ds.h"
+#include "sym_protglob_ds.h"
+
+#include "ether.h"
+
+#include <ctype.h>
+
+
+#else
+
+#include "adbg_dtc.h"
+
+#define YES             1
+#define NO              0
+
+#define TRUE            1
+#define FALSE           0
+
+#define ENABLED         1
+#define DISABLED        0
+
+#define CONTROL_C       3   /* ASCII 'ETX' */
+
+
+/*
+ * Faked after ctype.h
+ */
+
+#define isxdigit(X) (((X) >= '0' && (X) <= '9') || \
+                     ((X) >= 'A' && (X) <= 'F') || \
+                     ((X) >= 'a' && (X) <= 'f'))
+/*
+ * Borrowed from string.h
+ */
+
+extern unsigned int strlen ( const char * );
+
+/*
+ * Extracted from symtypes.h:
+ */
+
+typedef char                    BOOL;     /*  8 Bits */
+typedef unsigned char           UCHAR;    /*  8 Bits */
+typedef unsigned short          USHORT;   /* 16 Bits */
+typedef unsigned long           ULONG;    /* 32 Bits */
+
+/*
+ * for struct t_expr_tag and
+ * decl of build_and_add_expression
+ */
+#include "adbg_expression.h"
+#define NULL	0
+
+/*
+ * Extracted from printp.h:
+ */
+
+extern void printp ( const char * fptr, ... );
+extern void sprintp ( const char * fptr, ... );
+
+/*
+ * Extracted from ether.h:
+ */
+
+extern long eth_to_gdb ( UCHAR *buf, long length );
+
+
+/*
+ * Derived from hwequs.s:
+ */
+
+#define CS_CODE_START           0x100000
+#define CS_CODE_SIZE            0x200000
+#define LAST_CS_WORD            (CS_CODE_START + CS_CODE_SIZE - 2)
+
+#define sh_genstat1             (*((volatile ULONG *) 0xFFFFFE54))
+
+#define rs232_mode1             0               /* rs-232 mode 1 reg. */
+#define rs232_mode2             rs232_mode1     /* rs-232 mode 2 reg. */
+#define rs232_stat              4               /* rs-232 status reg. */
+#define rs232_clk               rs232_stat      /* rs-232 clock select reg. */
+#define rs232_cmd               8               /* rs-232 command reg */
+#define rs232_transmit          12              /* rs-232 transmit reg. */
+#define rs232_receive           rs232_transmit  /* rs-232 transmit reg. */
+#define rs232_aux               16              /* rs-232 aux control reg. */
+#define rs232_isr               20              /* rs-232 interrupt status reg. */
+#define rs232_imr               rs232_isr       /* rs-232 interrupt mask reg. */
+#define rs232_tc_high           24              /* rs-232 timer/counter high reg. */
+#define rs232_tc_low            28              /* rs-232 timer/counter low reg.  */
+
+
+#endif
+
+
+/*============================================================================
+ *                                 MODULE  DEFINES
+ *===========================================================================*/
+
+#define P_RST_LAN_UART_REG      ((volatile UCHAR  *) 0xFFFFFE45)
+#define M_RST_LAN_UART          0x80          /* Bit  7 */
+
+#define P_LAN0TR_REG            P_RST_LAN_UART_REG
+#define M_LAN0TR                0x20          /* Bit  5 */
+
+#define M_SH_GENCON_LAN0TR      0x00200000    /* Bit 21 */
+
+#define MAX_RS232_CHARS         512
+
+#define LAN_Q_MOD(X)            ((X) % MAX_RS232_CHARS)
+
+/*---------------------------------------*
+ *           LAN  UART  Registers        *
+ *---------------------------------------*/
+
+#define LAN_UART_BASE               ((ULONG) 0xfffffc22)
+
+/*  Write-Read  */
+
+#define P_LAN_MR1                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_mode1   )))
+#define P_LAN_MR2                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_mode2   )))
+
+/*  Write-Only  */
+
+#define P_LAN_ACR                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_aux     )))
+#define P_LAN_CR                    ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_cmd     )))
+#define P_LAN_CSR                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_clk     )))
+#define P_LAN_CTLR                  ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_tc_low  )))
+#define P_LAN_CTUR                  ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_tc_high )))
+#define P_LAN_IMR                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_imr     )))
+
+/*  Read-Only */
+
+#define P_LAN_SR                    ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_stat    )))
+#define P_LAN_ISR                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_isr     )))
+#define P_LAN_XMT                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_transmit)))
+#define P_LAN_RCV                   ((volatile UCHAR *) (LAN_UART_BASE + ((ULONG) rs232_receive )))
+
+/*
+ *   Bit Values for Write-Read and Write-Only Registers
+ */
+
+#define DEFAULT_LAN_MR1             ((UCHAR) 0x13)
+#define DEFAULT_LAN_MR2             ((UCHAR) 0x07)
+#define DEFAULT_LAN_CSR             ((UCHAR) 0xcc)
+#define DEFAULT_LAN_ACR             ((UCHAR) 0x38)
+#define DEFAULT_LAN_CTUR            ((UCHAR) 0xff)
+#define DEFAULT_LAN_CTLR            ((UCHAR) 0xff)
+
+#define LAN_ACR_SELECT_BRG_0        DEFAULT_LAN_ACR
+#define LAN_ACR_SELECT_BRG_1        (DEFAULT_LAN_ACR | 0x80)
+
+#define UART_CR_RESET_MR_PTR        ((UCHAR) 0x10) /* Reset MR pointer (points to MR1). */
+#define UART_CR_RESET_RVCR          ((UCHAR) 0x20) /* Reset receiver (disabled).        */
+#define UART_CR_RESET_XMTR          ((UCHAR) 0x30) /* Reset transmitter (disabled).     */
+#define UART_CR_RESET_ERROR_STATUS  ((UCHAR) 0x40) /* Reset error status.               */
+#define UART_CR_RESET_BRK_CHG_INT   ((UCHAR) 0x50) /* Reset break change interrupt.     */
+#define UART_CR_START_CNTR_TIMER    ((UCHAR) 0x80) /* Start counter/timer.              */
+#define UART_CR_STOP_CNTR           ((UCHAR) 0x90) /* Stop counter.                     */
+
+#define UART_CR_DISABLE_XMTR        ((UCHAR) 0x08) /* Disable transmitter.              */
+#define UART_CR_ENABLE_XMTR         ((UCHAR) 0x04) /* Enable transmitter.               */
+#define UART_CR_DISABLE_RCVR        ((UCHAR) 0x02) /* Disable receiver.                 */
+#define UART_CR_ENABLE_RCVR         ((UCHAR) 0x01) /* Enable receiver.                  */
+
+#define UART_CSR_BR_4800            ((UCHAR) 0x99) /* With either BRG Set selected (via ACR). */
+#define UART_CSR_BR_9600            ((UCHAR) 0xbb) /* With either BRG Set selected (via ACR). */
+#define UART_CSR_BR_19200           ((UCHAR) 0xcc) /* With BRG Set '1' selected (via ACR). */
+#define UART_CSR_BR_38400           ((UCHAR) 0xcc) /* With BRG Set '0' selected (via ACR). */
+
+#define UART_IMR_RxRDY              ((UCHAR) 0x04) /* Enable 'RxRDY' interrupt. */
+#define UART_IMR_TxEMT              ((UCHAR) 0x02) /* Enable 'TxEMT' interrupt. */
+#define UART_IMR_TxRDY              ((UCHAR) 0x01) /* Enable 'TxRDY' interrupt. */
+
+/*
+ *   Bit Masks for Read-Only Registers
+ */
+
+#define M_UART_SR_RCVD_BRK      0x80    /* Bit 7 */
+#define M_UART_SR_FE            0x40    /* Bit 6 */
+#define M_UART_SR_PE            0x20    /* Bit 5 */
+#define M_UART_SR_OE            0x10    /* Bit 4 */
+#define M_UART_SR_TxEMT         0x08    /* Bit 3 */
+#define M_UART_SR_TxRDY         0x04    /* Bit 2 */
+#define M_UART_SR_FFULL         0x02    /* Bit 1 */
+#define M_UART_SR_RxRDY         0x01    /* Bit 0 */
+
+#define M_UART_ISR_RxRDY        0x04    /* Bit 2 */
+#define M_UART_ISR_TxEMT        0x02    /* Bit 1 */
+#define M_UART_ISR_TxRDY        0x01    /* Bit 0 */
+
+/*---------------------------------------*
+ *       Support for 'Utility 83'.       *
+ *---------------------------------------*/
+
+#define LAN_UTIL_CODE           0x83
+
+#define LAN_INIT                ((ULONG) (('I' << 24) | ('N' << 16) | ('I' << 8) | 'T'))
+#define LAN_BAUD                ((ULONG) (('B' << 24) | ('A' << 16) | ('U' << 8) | 'D'))
+#define LAN_INTR                ((ULONG) (('I' << 24) | ('N' << 16) | ('T' << 8) | 'R'))
+#define LAN_XMT                 ((ULONG)               (('X' << 16) | ('M' << 8) | 'T'))
+#define LAN_ECHO                ((ULONG) (('E' << 24) | ('C' << 16) | ('H' << 8) | 'O'))
+#define LAN_STAT                ((ULONG) (('S' << 24) | ('T' << 16) | ('A' << 8) | 'T'))
+#define LAN_IN                  ((ULONG)                             (('I' << 8) | 'N'))
+#define LAN_OUT                 ((ULONG)               (('O' << 16) | ('U' << 8) | 'T'))
+
+#define LAN_PUTC                ((ULONG) (('P' << 24) | ('U' << 16) | ('T' << 8) | 'C'))
+#define LAN_WPM                 ((ULONG)               (('W' << 16) | ('P' << 8) | 'M'))
+
+#define STATUS(X)               ( ( ( X ) == 0 ) ? "disabled" : "enabled" )
+
+#define XMT_VIA_BP_ENABLED()    ( *P_LAN0TR_REG & M_LAN0TR  ?  1 : 0 )
+
+#define TRAP_1_INST             0x4E41
+
+/*
+ *   Bit #13 of shared genstat 1 indicates
+ *   which processor we are as follows.
+ *
+ *           0 => X (side A)
+ *           1 => Y (side B)
+ */
+
+#define M_PROC_ID               0x00002000
+
+#define IS_SIDE_A()             ( ( (sh_genstat1) & M_PROC_ID ) == 0 )
+#define IS_SIDE_B()             ( (sh_genstat1) & M_PROC_ID )
+
+
+#ifdef STANDALONE       /* Compile this module stand-alone for debugging */
+#define LAN_PUT_CHAR(X) printf("%c", X)
+#else
+#define LAN_PUT_CHAR(X) while ( lan_put_char( X ) )
+#endif
+
+
+
+
+#define VIA_RS232             0
+#define VIA_ETHERNET          1
+
+#define MAX_IO_BUF_SIZE       400
+
+#define MAX_BYTE_CODES        200 /* maximum length for bytecode string */
+
+
+static  ULONG           gdb_host_comm;
+
+static  ULONG           gdb_cat_ack;
+
+static  char            eth_outbuffer[ MAX_IO_BUF_SIZE + 1 ];
+
+
+#ifdef STANDALONE
+
+#define ACK_PKT()       LAN_PUT_CHAR( '+' )
+#define NACK_PKT()      LAN_PUT_CHAR( '-' )
+
+#else
+
+#define ACK_PKT()       {                                             \
+                          if ( VIA_ETHERNET == gdb_host_comm )        \
+                          {                                           \
+                            gdb_cat_ack = YES;                        \
+                          }                                           \
+                          else                                        \
+                          {                                           \
+                            LAN_PUT_CHAR( '+' );                      \
+                          }                                           \
+                        }
+
+
+
+#define NACK_PKT()      {                                             \
+                          if ( VIA_ETHERNET == gdb_host_comm )        \
+                          {                                           \
+                            eth_outbuffer[ 0 ] = '-';                 \
+                            eth_to_gdb( (UCHAR *) eth_outbuffer, 1 ); \
+                          }                                           \
+                          else                                        \
+                          {                                           \
+                            LAN_PUT_CHAR( '-' );                      \
+                          }                                           \
+                        }
+
+#endif
+
+
+
+
+/*============================================================================
+ *                                 MODULE  TYPEDEFS
+ *===========================================================================*/
+
+typedef struct rs232_queue {
+
+  long    head_index;
+
+  long    tail_index;
+
+  ULONG   overflows;
+
+  long    gdb_packet_start;
+  long    gdb_packet_end;
+  long    gdb_packet_csum1;
+  long    gdb_packet_csum2;
+
+  UCHAR   buf[ MAX_RS232_CHARS ];
+
+} T_RS232_QUEUE;
+
+
+
+
+/*=============================================================================
+ *                        EXTERNAL GLOBAL VARIABLES
+ *===========================================================================*/
+
+extern volatile UCHAR         sss_trace_flag;
+
+
+/*=============================================================================
+ *                           STATIC  MODULE  DECLARATIONS
+ *===========================================================================*/
+
+static  T_RS232_QUEUE lan_input_queue,
+                      lan_output_queue;
+
+static  BOOL          test_echo;
+
+#if 0
+/* The stub no longer seems to use this.  */
+static  BOOL          write_access_enabled;
+#endif
+
+static  int           baud_rate_idx;
+
+static  ULONG         tx_by_intr,
+                      tx_by_poll;
+
+static  UCHAR         lan_shadow_imr;
+
+
+/*=============================================================================
+ *                        EXTERNAL FUNCTION PROTOTYPES
+ *===========================================================================*/
+
+extern  long  write_to_protected_mem( void *address, unsigned short value );
+
+
+/*=============================================================================
+ *                      MODULE GLOBAL FUNCTIONS PROTOTYPES
+ *===========================================================================*/
+
+ULONG gdb_c_test( ULONG *parm );
+
+
+void  lan_init( void );
+
+void  lan_isr( void );
+
+long  lan_get_char( void );
+
+long  lan_put_char( UCHAR c );
+
+ULONG lan_util( ULONG *parm );
+
+
+/*=============================================================================
+ *                      MODULE LOCAL FUNCTION PROTOTYPES
+ *===========================================================================*/
+
+static  void  lan_reset( void );
+
+static  void  lan_configure( void );
+
+static  void  lan_init_queue( T_RS232_QUEUE *p_queue );
+
+static  void  lan_add_to_queue( long c, T_RS232_QUEUE *p_queue );
+
+static  UCHAR lan_next_queue_char( T_RS232_QUEUE *p_queue );
+
+static  void  lan_util_menu( void );
+
+static  long  get_gdb_input( long c, T_RS232_QUEUE *p_input_q );
+
+
+/*=============================================================================
+ *                      GDB STUB FUNCTION PROTOTYPES
+ *===========================================================================*/
+
+void  gdb_trap_1_handler( void );
+void  gdb_trace_handler ( void );
+
+void  gdb_get_eth_input( unsigned char *buf, long length );
+
+static void getpacket ( void );
+static void putpacket ( char * );
+static void discard_packet ( void );
+
+#ifdef    STANDALONE    /* Compile this module stand-alone for debugging */
+#include <stdio.h>
+#define printp printf   /* easier than declaring a local varargs stub func.  */
+#endif /* STANDALONE */
+
+
+/*=============================================================================
+ *                              MODULE BODY
+ *===========================================================================*/
+
+/* ------------------- Things that belong in a header file --------------- */
+extern char *memset (char *, int, int);
+
+                  /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*
+                  *                                     *
+                  *       Global Module Functions       *
+                  *                                     *
+                  *%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+
+static char   gdb_char_test;
+static short  gdb_short_test;
+static long   gdb_long_test;
+static char   gdb_arr_test[25];
+static struct GDB_STRUCT_TEST
+{
+  char   c;
+  short  s;
+  long   l;
+  int    bfield : 11;	/* collect bitfield */
+  char   arr[25];
+  struct GDB_STRUCT_TEST *next;
+} gdb_struct1_test, gdb_struct2_test, *gdb_structp_test, **gdb_structpp_test;
+
+static union GDB_UNION_TEST
+{
+  char   c;
+  short  s;
+  long   l;
+  int    bfield : 11;	/* collect bitfield */
+  char   arr[4];
+  union GDB_UNION_TEST *next;
+} gdb_union1_test;
+
+void gdb_recursion_test (int, int, int, int,  int,  int,  int);
+
+void gdb_recursion_test (int depth, 
+			 int q1, 
+			 int q2, 
+			 int q3, 
+			 int q4, 
+			 int q5, 
+			 int q6)
+{	/* gdb_recursion_test line 0 */
+  int q = q1;						/* gdbtestline 1 */
+
+  q1 = q2;						/* gdbtestline 2 */
+  q2 = q3;						/* gdbtestline 3 */
+  q3 = q4;						/* gdbtestline 4 */
+  q4 = q5;						/* gdbtestline 5 */
+  q5 = q6;						/* gdbtestline 6 */
+  q6 = q;						/* gdbtestline 7 */
+  if (depth--)						/* gdbtestline 8 */
+    gdb_recursion_test (depth, q1, q2, q3, q4, q5, q6);	/* gdbtestline 9 */
+}
+
+
+ULONG   gdb_c_test( ULONG *parm )
+
+{
+   char *p = "gdb_c_test";
+   char *rediculously_long_variable_name_with_equally_long_string_assignment;
+   register long local_reg = 7;
+   static unsigned long local_static, local_static_sizeof;
+   long local_long;
+   unsigned long *stack_ptr;
+   unsigned long end_of_stack;
+
+   rediculously_long_variable_name_with_equally_long_string_assignment = 
+     "rediculously long variable name with equally long string assignment";
+   local_static = 9;
+   local_static_sizeof = sizeof (struct GDB_STRUCT_TEST);
+   local_long = local_reg + 1;
+   stack_ptr  = (unsigned long *) &local_long;
+   end_of_stack = 
+     (unsigned long) &stack_ptr + sizeof(stack_ptr) + sizeof(end_of_stack) - 1;
+
+   printp ("\n$Id$\n");
+
+   printp( "%s: arguments = %X, %X, %X, %X, %X, %X\n",
+           p, parm[ 1 ], parm[ 2 ], parm[ 3 ], parm[ 4 ], parm[ 5 ], parm[ 6 ] );
+
+   gdb_char_test   = gdb_struct1_test.c = (char)   ((long) parm[1] & 0xff);
+   gdb_short_test  = gdb_struct1_test.s = (short)  ((long) parm[2] & 0xffff);
+   gdb_long_test   = gdb_struct1_test.l = (long)   ((long) parm[3] & 0xffffffff);
+   gdb_union1_test.l = (long) parm[4];
+   gdb_arr_test[0] = gdb_struct1_test.arr[0] = (char) ((long) parm[1] & 0xff);
+   gdb_arr_test[1] = gdb_struct1_test.arr[1] = (char) ((long) parm[2] & 0xff);
+   gdb_arr_test[2] = gdb_struct1_test.arr[2] = (char) ((long) parm[3] & 0xff);
+   gdb_arr_test[3] = gdb_struct1_test.arr[3] = (char) ((long) parm[4] & 0xff);
+   gdb_arr_test[4] = gdb_struct1_test.arr[4] = (char) ((long) parm[5] & 0xff);
+   gdb_arr_test[5] = gdb_struct1_test.arr[5] = (char) ((long) parm[6] & 0xff);
+   gdb_struct1_test.bfield = 144;
+   gdb_struct1_test.next = &gdb_struct2_test;
+   gdb_structp_test      = &gdb_struct1_test;
+   gdb_structpp_test     = &gdb_structp_test;
+
+   gdb_recursion_test (3, (long) parm[1], (long) parm[2], (long) parm[3],
+		       (long) parm[4], (long) parm[5], (long) parm[6]);
+
+   gdb_char_test = gdb_short_test = gdb_long_test = 0;
+   gdb_structp_test  = (void *) 0;
+   gdb_structpp_test = (void *) 0;
+   memset ((char *) &gdb_struct1_test, 0, sizeof (gdb_struct1_test));
+   memset ((char *) &gdb_struct2_test, 0, sizeof (gdb_struct2_test));
+   local_static_sizeof = 0;
+   local_static = 0;
+   return ( (ULONG) 0 );
+}
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_init
+ *
+ *
+ * DESCRIPTION:
+ *
+ *
+ * RETURN VALUE:
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+void    lan_init( void )
+
+{
+
+  if ( IS_SIDE_A( ) )
+  {
+
+    lan_reset( );
+
+    lan_init_queue( &lan_input_queue );
+
+    lan_init_queue( &lan_output_queue );
+
+    lan_configure( );
+  }
+
+  return;
+}
+/* end of 'lan_init'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_isr
+ *
+ *
+ * DESCRIPTION:
+ *
+ *
+ * RETURN VALUE:    None.
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+void      lan_isr( void )
+
+{
+  UCHAR   c;
+
+
+  lan_shadow_imr = 0;           /*  Disable all UART interrupts.  */
+  *P_LAN_IMR = lan_shadow_imr;
+
+
+  if ( *P_LAN_ISR & M_UART_ISR_RxRDY )
+  {
+
+    gdb_host_comm = VIA_RS232;
+
+    c = *P_LAN_RCV;
+
+    if ( test_echo )
+    {
+      /* ????? */
+    }
+
+    if ( c == CONTROL_C )
+    {
+        /* can't stop the target, but we can tell gdb to stop waiting... */
+      discard_packet( );
+      putpacket( "S03" );       /* send back SIGINT to the debugger */
+    }
+
+    else
+    {
+      lan_add_to_queue( (long) c, &lan_input_queue );
+      get_gdb_input( (long) c, &lan_input_queue );
+    }
+
+  }
+
+  if ( XMT_VIA_BP_ENABLED( ) )
+  {
+
+    c = 0;
+
+    while ( (*P_LAN_ISR & M_UART_ISR_TxRDY)  &&  (c = lan_next_queue_char( &lan_output_queue )) )
+    {
+      *P_LAN_XMT = c;
+      ++tx_by_intr;
+    }
+
+    if ( c )
+    {
+      lan_shadow_imr |= UART_IMR_TxRDY;   /*  (Re-)Enable 'TxRDY' interrupt from UART.  */
+    }
+
+  }
+
+
+  lan_shadow_imr |= UART_IMR_RxRDY;       /*  Re-Enable 'RxRDY' interrupt from UART.  */
+  *P_LAN_IMR = lan_shadow_imr;
+
+
+
+  return;
+}
+/* end of 'lan_isr'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_get_char
+ *
+ *
+ * DESCRIPTION:     Fetches a character from the UART.
+ *
+ *
+ * RETURN VALUE:    0 on success, -1 on failure.
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+long    lan_get_char( void )
+
+{
+  long status = -2; /* AGD: nothing found in rcv buffer */
+
+  if ( *P_LAN_SR & M_UART_SR_RxRDY )
+  {
+    char c = (char) *P_LAN_RCV;
+
+    if ( test_echo )
+    {
+      LAN_PUT_CHAR ( c );
+    }
+
+    if ( c == CONTROL_C )
+    {
+        /* can't stop the target, but we can tell gdb to stop waiting... */
+      discard_packet( );
+      putpacket( "S03" );       /* send back SIGINT to the debugger */
+      status = 0;               /* success */
+    }
+
+    else
+    {
+      lan_add_to_queue( (long) c, &lan_input_queue );
+      status = get_gdb_input( (long) c, &lan_input_queue );
+    }
+
+  }
+
+  return( status );
+}
+/* end of 'lan_get_char'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_put_char
+ *
+ * DESCRIPTION:     Puts a character out via the UART.
+ *
+ * RETURN VALUE:    0 on success, -1 on failure.
+ *
+ * USED GLOBAL VARIABLES: none.
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ * NOTES: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ *        !!                                                                  !!
+ *        !!  If 'XMT_VIA_BP_ENABLED()' is FALSE then output is THROWN AWAY.  !!
+ *        !!  This prevents anyone infinite-looping on this function.         !!
+ *        !!                                                                  !!
+ *        !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+ *
+ *---------------------------------------------------------------------------*/
+
+long    lan_put_char( UCHAR c )
+
+{
+  long    status = -1;
+
+  if ( XMT_VIA_BP_ENABLED( ) )
+  {
+
+    if ( *P_LAN_SR & M_UART_SR_TxRDY )
+    {
+      lan_add_to_queue( (long) c, &lan_output_queue );
+
+      c = lan_next_queue_char( &lan_output_queue );
+
+      *P_LAN_XMT = c;
+      ++tx_by_poll;
+      status = 0;
+    }
+#if 0
+    else
+    {
+      status = 0;
+      lan_shadow_imr |= UART_IMR_TxRDY;   /*  Enable 'TxRDY' interrupt from UART. */
+      *P_LAN_IMR = lan_shadow_imr;
+    }
+#endif
+  }
+
+  else
+  {
+    status = 0;   /* You lose: input character goes to the bit bucket. */
+  }
+
+  return( status );
+}
+/* end of 'lan_put_char'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_util
+ *
+ * DESCRIPTION:
+ *
+ * RETURN VALUE:
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ * NOTES:
+ *
+ *---------------------------------------------------------------------------*/
+
+ULONG   lan_util( ULONG *parm )
+
+{
+
+
+  static const struct {
+
+    ULONG rate_code;
+    UCHAR acr_setting;
+    UCHAR csr_setting;
+
+  } baud_rate_setting [] = {
+
+    { 0x38400, LAN_ACR_SELECT_BRG_0, UART_CSR_BR_38400 },
+    { 0x19200, LAN_ACR_SELECT_BRG_1, UART_CSR_BR_19200 },
+    { 0x9600,  LAN_ACR_SELECT_BRG_0, UART_CSR_BR_9600  },
+    { 0x4800,  LAN_ACR_SELECT_BRG_0, UART_CSR_BR_4800  }
+  };
+
+
+#define BOGUS_P1        0xE1
+#define BOGUS_P2        0xE2
+
+  ULONG   not_done_code;
+
+
+  ULONG   opcode;
+  ULONG   parm_1;
+  ULONG   parm_2;
+
+  int     i;
+  UCHAR   c;
+
+
+  not_done_code = 0;
+
+  opcode = parm[ 1 ];
+  parm_1 = parm[ 2 ];
+  parm_2 = parm[ 3 ];
+
+
+  switch ( opcode )
+  {
+
+    case LAN_INIT:
+      {
+
+        lan_init( );
+        printp( "\n\n  Interface (Re)Initialized ...\n\n" );
+
+        break;
+      }
+
+
+    case LAN_BAUD:
+      {
+
+        for ( i = 0; i < (int)(sizeof(baud_rate_setting) / sizeof(baud_rate_setting[0])); i ++ )
+        {
+          if ( baud_rate_setting[i].rate_code == parm_1 )
+          {
+            baud_rate_idx = i;
+            *P_LAN_ACR = baud_rate_setting[i].acr_setting;
+            *P_LAN_CSR = baud_rate_setting[i].csr_setting;
+            printp ( "Baud rate set to %X!\n", baud_rate_setting[i].rate_code );
+            return( not_done_code );
+          }
+        }
+
+        printp( "\n\n  *** SYNTAX Error  -  Invalid baudrate (P2)\n\n" );
+        not_done_code = BOGUS_P2;
+
+        break;
+      }
+
+
+    case LAN_INTR:
+      {
+
+        switch ( parm_1 )
+        {
+
+          case 0x0D: /* Disable 'RxRDY' Interrupts */
+            {
+              lan_shadow_imr &= ~UART_IMR_RxRDY;
+              *P_LAN_IMR = lan_shadow_imr;
+              printp( "\n\n  Receive Ready Interrupts DISABLED ...\n\n" );
+              break;
+            }
+
+          case 0x0E: /* Enable 'RxRDY' Interrupts */
+            {
+              lan_shadow_imr |= UART_IMR_RxRDY;
+              *P_LAN_IMR = lan_shadow_imr;
+              printp( "\n\n  Receive Ready Interrupts ENABLED ...\n\n" );
+              break;
+            }
+
+          default:
+            {
+              printp( "\n\n  *** SYNTAX Error  -  Invalid P2 (use D or E)\n\n" );
+              not_done_code = BOGUS_P2;
+            }
+        }
+
+        break;
+      }
+
+
+    case LAN_XMT:
+      {
+
+        switch ( parm_1 )
+        {
+
+          case 0x0E: /* Enable Transmission-via-Backplane */
+            {
+              if ( !(*P_LAN0TR_REG & M_LAN0TR) )
+              {
+                *P_LAN0TR_REG |= M_LAN0TR;  /* 0 -> 1 */
+              }
+
+              printp( "\n\n  Transmit-via-Backplane ENABLED ...\n\n" );
+              break;
+            }
+
+          case 0x0D: /* Disable Transmission-via-Backplane */
+            {
+              if ( *P_LAN0TR_REG & M_LAN0TR )
+              {
+                *P_LAN0TR_REG &= ~M_LAN0TR; /* 1 -> 0 */
+              }
+
+              printp( "\n\n  Transmit-via-Backplane DISABLED ...\n\n" );
+              break;
+            }
+
+          default:
+            {
+              printp( "\n\n  *** SYNTAX Error  -  Invalid P2 (use D or E)\n\n" );
+              not_done_code = BOGUS_P2;
+              lan_util_menu( );
+            }
+        }
+
+        break;
+      }
+
+
+    case LAN_STAT:
+      {
+
+      printp( "\n              -- Status --\n\n" );
+
+        printp( "          Baud Rate: %X *\n",   baud_rate_setting[ baud_rate_idx ].rate_code );
+        printp( "         Xmt-via-BP: %s *\n",   STATUS( XMT_VIA_BP_ENABLED( ) ) );
+        printp( "         RxRdy Intr: %s *\n",   STATUS( (lan_shadow_imr & M_UART_ISR_RxRDY) ) );
+   /*** printp( "         TxRdy Intr: %s\n",     STATUS( (lan_shadow_imr & M_UART_ISR_TxRDY) ) ); ***/
+        printp( "               Echo: %s *\n\n", STATUS( test_echo ) );
+
+        printp( "                IMR: %02X\n", (ULONG) lan_shadow_imr );
+        printp( "                ISR: %02X\n", (ULONG) *P_LAN_ISR );
+        printp( "                 SR: %02X\n\n", (ULONG) *P_LAN_SR );
+
+        printp( "    Input Overflows: %d\n\n", lan_input_queue.overflows );
+
+        printp( "         Tx by Intr: %d\n", tx_by_intr  );
+        printp( "         Tx by Poll: %d\n\n", tx_by_poll );
+
+        printp( "         *  Can be set or toggled via Utility %2X.\n\n", (ULONG) LAN_UTIL_CODE );
+
+        break;
+      }
+
+
+    case LAN_IN:
+      {
+
+        switch ( parm_1 )
+        {
+
+          case 0x0C: /* Clear and Reset Queue */
+            {
+              lan_init_queue( &lan_input_queue );
+              printp( "\n\n  Queue CLEARED/RESET ...\n\n" );
+              break;
+            }
+
+          case 0x0D: /* Display Queue */
+            {
+              printp( "\n                        -- Input Queue --\n" );
+              printp( "\n        Head Index: %8X     Tail Index: %8X\n\n    ",
+                     (ULONG) lan_input_queue.head_index, (ULONG) lan_input_queue.tail_index );
+
+              for ( i = 0; i < MAX_RS232_CHARS; ++i )
+              {
+                printp( " %02X", (ULONG) lan_input_queue.buf[ i ] );
+
+                if ( 15 == (i % 16) )
+                {
+                  int j;
+
+                  printp ( "    " );
+                  for ( j = i - 15; j <= i; j++ )
+                    {
+                      if ( lan_input_queue.buf[ j ] >= ' ' &&
+                          lan_input_queue.buf[ j ] < 127 )
+                        printp ( "%c", lan_input_queue.buf[ j ] );
+                      else
+                        printp ( "." );
+                    }
+                  printp( "\n    " );
+                }
+
+                else if ( 7 == (i % 8) )
+                {
+                  printp( " " );
+                }
+
+              }
+
+              printp( "\n" );
+
+              break;
+            }
+
+          case 0x0F: /* Fetch next character in Queue */
+            {
+              c = lan_next_queue_char( &lan_input_queue );
+
+              if ( c )
+              {
+                printp( "\n\n  Next Character: " );
+                if (  0x21 <= c  &&  c <= 0x7F )
+                {
+                  printp( "%c\n\n", (ULONG) c );
+                }
+
+                else if ( 0x20 == ((UCHAR) c) )
+                {
+                  printp( "<space>\n\n" );
+                }
+
+                else
+                {
+                  printp( "%02X\n\n", (ULONG) c );
+                }
+              }
+
+              else
+              {
+                printp( "\n\n  Input Queue EMPTY ...\n\n" );
+              }
+
+            break;
+            }
+
+          default:
+            {
+            printp( "\n\n  *** SYNTAX Error  -  Invalid P2 ...\n\n" );
+            not_done_code = BOGUS_P2;
+            break;
+            }
+        }
+
+      break;
+      }
+
+
+    case LAN_OUT:
+      {
+
+        switch ( parm_1 )
+        {
+
+          case 0x0C: /* Clear and Reset Queue */
+            {
+              lan_init_queue( &lan_output_queue );
+              printp( "\n\n  Queue CLEARED/RESET ...\n\n" );
+              break;
+            }
+
+          case 0x0D: /* Display Queue */
+            {
+              printp( "\n                       -- Output Queue --\n" );
+              printp( "\n        Head Index: %8X     Tail Index: %8X\n\n    ",
+                     (ULONG) lan_output_queue.head_index, (ULONG) lan_output_queue.tail_index );
+
+              for ( i = 0; i < MAX_RS232_CHARS; ++i )
+              {
+                printp( " %02X", (ULONG) lan_output_queue.buf[ i ] );
+
+                if ( 15 == (i % 16) )
+                {
+                  int j;
+
+                  printp ( "    " );
+                  for ( j = i - 15; j <= i; j++ )
+                    {
+                      if ( lan_output_queue.buf[ j ] >= ' ' &&
+                          lan_output_queue.buf[ j ] < 127 )
+                        printp ( "%c", lan_output_queue.buf[ j ] );
+                      else
+                        printp ( "." );
+                    }
+                  printp( "\n    " );
+                }
+
+                else if ( 7 == (i % 8) )
+                {
+                  printp( " " );
+                }
+
+              }
+
+              printp( "\n" );
+
+              break;
+            }
+
+          case 0x0F: /* Fetch next character in Queue */
+            {
+              c = lan_next_queue_char( &lan_output_queue );
+
+              if ( c )
+              {
+                printp( "\n\n  Next Character: " );
+                if (  0x21 <= c  &&  c <= 0x7F )
+                {
+                  printp( "%c\n\n", (ULONG) c );
+                }
+
+                else if ( 0x20 == c )
+                {
+                  printp( "<space>\n\n" );
+                }
+
+                else
+                {
+                  printp( "%02X\n\n", (ULONG) c );
+                }
+              }
+
+              else
+              {
+                printp( "\n\n  Input Queue EMPTY ...\n\n" );
+              }
+
+              break;
+            }
+
+          default:
+            {
+            printp( "\n\n  *** SYNTAX Error  -  Invalid P2 ...\n\n" );
+            not_done_code = BOGUS_P2;
+            break;
+            }
+        }
+
+        break;
+      }
+
+
+    case LAN_ECHO:
+      {
+
+        switch ( parm_1 )
+        {
+
+          case 0x0E:
+            {
+              test_echo = ENABLED;
+              printp( "\n\n  Test echo ENABLED ...\n\n" );
+              break;
+            }
+
+          case 0x0D:
+            {
+              test_echo = DISABLED;
+              printp( "\n\n  Test echo DISABLED ...\n\n" );
+              break;
+            }
+
+          default:
+            {
+              printp( "\n\n  *** SYNTAX Error  -  Invalid P2 ...\n\n" );
+              not_done_code = BOGUS_P2;
+              break;
+            }
+        }
+
+        break;
+      }
+
+
+    case LAN_PUTC:
+      {
+
+        if ( 0x20 < parm_1  &&  parm_1 < 0x7F )
+        {
+          if ( lan_put_char( (UCHAR) parm_1 ) )
+          {
+            printp( "\n\n  *** 'lan_put_char' Error ...\n" );
+          }
+
+          else
+          {
+            printp( "\n\n  O.K. ...\n" );
+          }
+
+        }
+
+        else
+        {
+          printp( "\n\n  *** Error  -  character must be in the 0x21-0x7E range ...\n" );
+          not_done_code = BOGUS_P2;
+        }
+
+        break;
+      }
+
+/***
+    case LAN_WPM:
+      {
+
+        if ( write_to_protected_mem( (void *) parm_1, (unsigned short) parm_2 ) )
+        {
+          printp( "\n  Write to protected memory FAILED ...\n" );
+        }
+
+        break;
+      }
+***/
+
+    case 0: /* no argument -- print menu */
+      {
+        lan_util_menu( );
+        break;
+      }
+
+
+    default:
+      {
+        parm_2 = 0;  /* to supress compiler warning with 'LAN_WPM' case disabled */
+
+        printp( "\n\n  *** SYNTAX Error  -  Invalid P1 ...\n\n" );
+        not_done_code = BOGUS_P1;
+        break;
+      }
+
+
+  } /*  End of 'switch ( opcode )'. */
+
+
+return( not_done_code );
+}
+/* end of 'lan_util'
+ *===========================================================================*/
+
+
+                  /*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*
+                  *                                     *
+                  *         Local Module Functions      *
+                  *                                     *
+                  *%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_reset
+ *
+ * DESCRIPTION:     Resets the LAN UART by strobing the 'RST_LAN_UART' bit in the
+ *                  Shared Control 1 area.
+ *
+ *                             1 _|       ______
+ *                                |      |      |
+ *                          Bit   |      |      |
+ *                                |      |      |
+ *                             0 _|______|      |______
+ *                                |---------------------> t
+ *
+ * RETURN VALUE:    None.
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ * NOTES:           H/W configuration requires that a byte in the shared
+ *                  control 1 area must be read before being written.
+ *
+ *---------------------------------------------------------------------------*/
+
+static  void    lan_reset( void )
+
+{
+
+  while ( *P_RST_LAN_UART_REG & M_RST_LAN_UART )
+  {
+    *P_RST_LAN_UART_REG &= ~M_RST_LAN_UART;     /* 0 */
+  }
+
+  while ( !(*P_RST_LAN_UART_REG & M_RST_LAN_UART) )
+  {
+    *P_RST_LAN_UART_REG |= M_RST_LAN_UART;      /* 1 */
+  }
+
+  while ( *P_RST_LAN_UART_REG & M_RST_LAN_UART )
+  {
+    *P_RST_LAN_UART_REG &= ~M_RST_LAN_UART;     /* 0 */
+  }
+
+}
+/* end of 'lan_reset'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_configure
+ *
+ *
+ * DESCRIPTION:
+ *
+ *
+ * RETURN VALUE:
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+static  void    lan_configure( void )
+
+{
+
+  *P_LAN_CR = UART_CR_RESET_MR_PTR;       /*  Points to MR1.        */
+  *P_LAN_CR = UART_CR_RESET_RVCR;         /*  Receiver disabled.    */
+  *P_LAN_CR = UART_CR_RESET_XMTR;         /*  Transmitter disabled. */
+  *P_LAN_CR = UART_CR_RESET_ERROR_STATUS;
+  *P_LAN_CR = UART_CR_RESET_BRK_CHG_INT;
+
+  *P_LAN_MR1 = DEFAULT_LAN_MR1;
+  *P_LAN_MR2 = DEFAULT_LAN_MR2;
+
+  *P_LAN_ACR = DEFAULT_LAN_ACR;
+
+  *P_LAN_CSR = UART_CSR_BR_9600;
+  baud_rate_idx = 2;
+
+  *P_LAN_CTUR = DEFAULT_LAN_CTUR;
+  *P_LAN_CTLR = DEFAULT_LAN_CTLR;
+
+  *P_LAN_CR = (UART_CR_START_CNTR_TIMER | UART_CR_ENABLE_XMTR | UART_CR_ENABLE_RCVR);
+
+  lan_shadow_imr = UART_IMR_RxRDY;        /*  Enable only 'RxRDY' interrupt from UART. */
+  *P_LAN_IMR = lan_shadow_imr;
+
+  tx_by_intr = 0;
+  tx_by_poll = 0;
+
+  return;
+}
+/* end of 'lan_configure'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_init_queue
+ *
+ * DESCRIPTION:
+ *
+ * RETURN VALUE:    None.
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ * NOTES:
+ *
+ *---------------------------------------------------------------------------*/
+
+static  void    lan_init_queue( T_RS232_QUEUE *p_queue )
+
+{
+  long i;
+
+    /*
+    *   We set "head" equal to "tail" implying the queue is empty,
+    *   BUT the "head" and "tail" should each point to valid queue
+    *   positions.
+    */
+
+  p_queue->head_index = 0;
+  p_queue->tail_index = 0;
+
+  p_queue->overflows = 0;
+
+  p_queue->gdb_packet_start = -1;
+  p_queue->gdb_packet_end   = -1;
+
+  p_queue->gdb_packet_csum1 = -1;
+  p_queue->gdb_packet_csum2 = -1;
+
+  for ( i = 0; i < MAX_RS232_CHARS; ++i )
+  {
+    p_queue->buf[ i ] = 0;
+  }
+
+  return;
+}
+/* end of 'lan_init_queue'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_add_to_queue
+ *
+ *
+ * DESCRIPTION:     Adds the specified character to the tail of the
+ *                  specified queue.  Observes "oldest thrown on floor"
+ *                  rule (i.e. the queue is allowed to "wrap" and the
+ *                  input character is unconditionally placed at the
+ *                  tail of the queue.
+ *
+ *
+ * RETURN VALUE:    None.
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+static  void    lan_add_to_queue( long c, T_RS232_QUEUE *p_queue )
+
+{
+
+  if ( p_queue )    /*  Sanity check. */
+  {
+
+    if ( c & 0x000000FF )   /*  We don't allow NULL characters to be added to a queue.  */
+    {
+        /*  Insert the new character at the tail of the queue.  */
+
+      p_queue->buf[ p_queue->tail_index ] = (UCHAR) (c & 0x000000FF);
+
+        /*  Increment the tail index. */
+
+      if ( MAX_RS232_CHARS <= ++(p_queue->tail_index) )
+      {
+        p_queue->tail_index = 0;
+      }
+
+        /*  Check for wrapping (i.e. overflow). */
+
+      if ( p_queue->head_index == p_queue->tail_index )
+      {
+          /*  If the tail has caught up to the head record the overflow . . . */
+
+        ++(p_queue->overflows);
+
+          /*  . . . then increment the head index.  */
+
+        if ( MAX_RS232_CHARS <= ++(p_queue->head_index) )
+        {
+          p_queue->head_index = 0;
+        }
+
+      }
+
+    } /*  End of 'if ( c & 0x000000FF )'. */
+
+  } /*  End of 'if ( p_queue )'.  */
+
+
+  return;
+}
+/* end of 'lan_add_to_queue'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_next_queue_char
+ *
+ * DESCRIPTION:
+ *
+ * RETURN VALUE:
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ * NOTES:
+ *
+ *---------------------------------------------------------------------------*/
+
+static  UCHAR   lan_next_queue_char( T_RS232_QUEUE *p_queue )
+
+{
+  UCHAR   c;
+
+
+  c = 0;
+
+  if ( p_queue )
+  {
+
+    if ( p_queue->head_index != p_queue->tail_index )
+    {
+        /*  Return the 'oldest' character in the queue. */
+
+      c = p_queue->buf[ p_queue->head_index ];
+
+        /*  Increment the head index. */
+
+      if ( MAX_RS232_CHARS <= ++(p_queue->head_index) )
+      {
+        p_queue->head_index = 0;
+      }
+
+    }
+
+  } /*  End of 'if ( p_queue )'.  */
+
+
+  return( c );
+}
+
+/* end of 'lan_next_queue_char'
+ *===========================================================================*/
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   lan_util_menu
+ *
+ * DESCRIPTION:     Prints out a brief help on the LAN UART control utility.
+ *
+ * RETURN VALUE:    None.
+ *
+ * USED GLOBAL VARIABLES: None.
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS: None.
+ *
+ * NOTES: None.
+ *
+ *---------------------------------------------------------------------------*/
+
+static  void    lan_util_menu( void )
+
+{
+
+  /*
+   * Multiply calling printp() below is made due to the limitations
+   * of printp(), incapable of handling long formatting constants:
+   */
+
+ printp( "\n               -- Options --\n\n" );
+
+  printp( "    %2X,'INIT' ............... Reset & (Re)INITIALIZE Interface.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'BAUD',<rate> ........ Set BAUD Rate.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'INTR',<mode> ........ Toggle 'RxRDY' Interrupts.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'XMT',<mode> ......... Toggle TRANSMIT-via-backplane.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'STAT' ............... Display STATUS.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'ECHO',<mode> ........ Enable/Disable Test ECHO.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'IN',<action> ........ Access INPUT Queue.\n", (ULONG) LAN_UTIL_CODE );
+  printp( "    %2X,'OUT',<action> ....... Access OUTPUT Queue.\n\n", (ULONG) LAN_UTIL_CODE );
+
+  printp( "    %2X,'PUTC',<char> ........ Output a Character (i.e. <char>).\n\n", (ULONG) LAN_UTIL_CODE );
+
+/***
+  printp( "    %2X,'WPM',address,word ... Write Protected Memory Test.\n\n", (ULONG) LAN_UTIL_CODE );
+***/
+
+  printp( "    <rate>:  4800  <mode>:  E - enable   <action>:  C - clear/reset\n" );
+  printp( "             9600           D - disable             D - display\n" );
+  printp( "            19200                                   F - fetch next char\n" );
+  printp( "            38400\n" );
+}
+/* end of 'lan_util_menu'
+ *===========================================================================*/
+
+
+/* Thu Feb  5 17:14:41 EST 1998  CYGNUS...CYGNUS...CYGNUS...CYGNUS...CYGNUS...CYGNUS...CYGNUS...CYGNUS */
+
+
+static  long    get_gdb_input( long c, T_RS232_QUEUE * p_input_q )
+
+{
+
+  /* Now to detect when we've got a gdb packet... */
+
+  if ( '$' == c ) { /* char marks beginning of a packet */
+
+      if ( -1 != p_input_q->gdb_packet_start ||
+           -1 != p_input_q->gdb_packet_end   ||
+           -1 != p_input_q->gdb_packet_csum1 ||
+           -1 != p_input_q->gdb_packet_csum2 ) { /* PROTOCOL ERROR */
+
+        /* NEW: Actually, this probably means that we muffed a packet,
+           and GDB has already resent it.  The thing to do now is to
+           throw away the one we WERE working on, but immediately start
+           accepting the new one.  Don't NAK, or GDB will have to try
+           and send it yet a third time!  */
+
+          /*NACK_PKT( );*/    /*<ETHERNET>*/
+          discard_packet( );                    /* throw away old packet */
+          lan_add_to_queue ('$', p_input_q);    /* put the new "$" back in */
+          return 0;
+      } else {          /* match new "$" */
+        p_input_q->gdb_packet_start = p_input_q->tail_index;
+        p_input_q->gdb_packet_end =
+          p_input_q->gdb_packet_csum1 =
+            p_input_q->gdb_packet_csum2 = -1;
+      }
+    } else if ( '#' == c ) { /* # marks end of packet (except for checksum) */
+
+      if ( -1 == p_input_q->gdb_packet_start ||
+           -1 != p_input_q->gdb_packet_end   ||
+           -1 != p_input_q->gdb_packet_csum1 ||
+           -1 != p_input_q->gdb_packet_csum2 ) { /* PROTOCOL ERROR */
+
+          /* Garbled packet.  Discard, but do not NAK.  */
+
+          /*NACK_PKT( );*/    /*<ETHERNET>*/
+          discard_packet( );
+          return -1;
+      }
+      p_input_q->gdb_packet_end = p_input_q->tail_index;
+      p_input_q->gdb_packet_csum1 = p_input_q->gdb_packet_csum2 = -1;
+
+  } else if ( -1 != p_input_q->gdb_packet_start &&
+              -1 != p_input_q->gdb_packet_end) {
+
+    if ( isxdigit( c ) ) { /* char is one of two checksum digits for packet */
+
+      if ( -1 == p_input_q->gdb_packet_csum1 &&
+           LAN_Q_MOD( p_input_q->gdb_packet_end + 1 ) ==
+           p_input_q->tail_index ) {
+
+        /* first checksum digit */
+
+        p_input_q->gdb_packet_csum1 = p_input_q->tail_index;
+        p_input_q->gdb_packet_csum2 = -1;
+
+      } else if ( -1 == p_input_q->gdb_packet_csum2 &&
+                  LAN_Q_MOD( p_input_q->gdb_packet_end + 2 ) ==
+                  p_input_q->tail_index ) {
+
+        /* second checksum digit: packet is complete! */
+
+        p_input_q->gdb_packet_csum2 = p_input_q->tail_index;
+        getpacket();    /* got a packet -- extract it */
+
+      } else { /* probably can't happen (um... three hex digits?) */
+
+        /* PROTOCOL ERROR */
+        /* Not sure how this can happen, but ...
+           discard it, but do not NAK it.  */
+        /*NACK_PKT( );*/    /*<ETHERNET>*/
+        discard_packet( );
+        return -1;
+      }
+
+    } else { /* '#' followed by non-hex char */
+
+      /* PROTOCOL ERROR */
+      /* Bad packet -- discard but do not NAK */
+      /*NACK_PKT( );*/    /*<ETHERNET>*/
+      discard_packet( );
+      return -1;
+    }
+  }
+
+  return 0;
+}
+
+
+
+
+#ifdef    STANDALONE
+
+/* stand-alone stand-alone stand-alone stand-alone stand-alone stand-alone
+   stand-alone                                                 stand-alone
+   stand-alone Enable stand-alone build, for ease of debugging stand-alone
+   stand-alone                                                 stand-alone
+   stand-alone stand-alone stand-alone stand-alone stand-alone stand-alone */
+
+long write_to_protected_mem (addr, word)
+     void *addr;
+     unsigned short word;
+{
+  return 0;
+}
+
+
+char dummy_memory[0x4000];
+
+int main ( void )
+{
+  long c;
+
+  lan_init_queue( &lan_input_queue );
+  printf( "Stand-alone EMC 'stub', pid = %d\n", getpid( ) );
+  printf( "Start of simulated 'memory': 0x%08x\n", &dummy_memory);
+  while ( (c = getc( stdin ) ) != EOF )
+    {
+      if ( c == '\\' )  /* escape char */
+        break;
+
+      lan_add_to_queue( c, &lan_input_queue );
+      get_gdb_input (c, &lan_input_queue);
+      fflush( stdout );
+    }
+
+  printf( "Goodbye!\n" );
+  exit( 0 );
+}
+
+#define SRAM_START      ((void *) (&dummy_memory[0] + 0x00000000))
+#define SRAM_END        ((void *) (&dummy_memory[0] + 0x00000400))
+
+#define RO_AREA_START   ((void *) (&dummy_memory[0] + 0x00000100))
+#define RO_AREA_END     ((void *) (&dummy_memory[0] + 0x00000300))
+
+#define NVD_START       ((void *) (&dummy_memory[0] + 0x00003000))
+#define NVD_END         ((void *) (&dummy_memory[0] + 0x00003100))
+
+#else   /* normal stub (not stand-alone) */
+
+#define SRAM_START              ((void *) 0x00000000)
+#define SRAM_END                ((void *) 0x00400000)
+
+#define RO_AREA_START           ((void *) 0x00100000)
+#define RO_AREA_END             ((void *) 0x00300000)
+
+#define NVD_START               ((void *) 0x03000000)
+#define NVD_END                 ((void *) 0x03100000)
+
+#endif /* STANDALONE */
+
+
+
+
+/* gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb
+   gdb                                                                 gdb
+   gdb                Here begins the gdb stub section.                gdb
+   gdb          The following functions were added by Cygnus,          gdb
+   gdb             to make this thing act like a gdb stub.             gdb
+   gdb                                                                 gdb
+   gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb gdb */
+
+
+/* ------------------- global defines and data decl's -------------------- */
+
+#define hexchars        "0123456789abcdef"
+
+/* there are 180 bytes of registers on a 68020 w/68881      */
+/* many of the fpa registers are 12 byte (96 bit) registers */
+#define NUMREGBYTES          180
+#define NUMREGS              29
+#define REGISTER_BYTE(regno) regno
+
+enum regnames { D0, D1, D2, D3, D4, D5, D6, D7,
+                A0, A1, A2, A3, A4, A5, A6, A7,
+                PS, PC,
+                FP0, FP1,
+                FP2, FP3,
+                FP4, FP5,
+                FP6, FP7,
+                FPCONTROL, FPSTATUS, FPIADDR
+              };
+
+unsigned long registers[NUMREGBYTES/4];
+
+static long remote_debug;
+
+#define BUFMAX                MAX_IO_BUF_SIZE
+static char inbuffer[BUFMAX], outbuffer[BUFMAX];
+static char spare_buffer[BUFMAX];
+
+
+struct stub_trace_frame
+{
+  int                    valid;
+  unsigned long          frame_id;
+  unsigned long          tdp_id;
+  FRAME_DEF             *frame_data;
+  COLLECTION_FORMAT_DEF *format;
+  unsigned long          traceregs[NUMREGBYTES/4];
+  unsigned char         *stack_data;
+  unsigned char         *memrange_data;
+} curframe;
+
+/* -------------------      function prototypes       -------------------- */
+
+void handle_request ( char * );
+
+/* -------------------         Implementation         -------------------- */
+
+static void
+discard_packet( void )
+{
+  lan_input_queue.head_index = lan_input_queue.tail_index;
+
+  lan_input_queue.gdb_packet_start =
+    lan_input_queue.gdb_packet_end   =
+      lan_input_queue.gdb_packet_csum1 =
+        lan_input_queue.gdb_packet_csum2 = -1;
+}
+
+/* Utility function: convert an ASCII isxdigit to a hex nybble */
+
+static long
+hex( char ch )
+{
+  if ( (ch >= 'A') && (ch <= 'F') )
+    return ch - 'A' + 10;
+  if ( (ch >= 'a') && (ch <= 'f') )
+    return ch - 'a' + 10;
+  if ( (ch >= '0') && (ch <= '9') )
+    return ch - '0';
+  return -1;
+}
+
+static void
+getpacket( void )
+{
+  unsigned char our_checksum, their_checksum;
+  char *copy = inbuffer;
+  unsigned char c;
+
+  our_checksum = 0;
+
+  /* first find the '$' */
+  while ((c = lan_next_queue_char ( &lan_input_queue )) != '$')
+    if (c == 0)                 /* ??? Protocol error? (paranoia) */
+      {
+          /* PROTOCOL ERROR (missing '$') */
+        /*NACK_PKT( );*/    /*<ETHERNET>*/
+        return;
+      }
+
+  /* Now copy the message (up to the '#') */
+  for (c = lan_next_queue_char ( &lan_input_queue );    /* skip  the   '$' */
+       c != 0 && c != '#';              /* stop at the '#' */
+       c = lan_next_queue_char ( &lan_input_queue ))
+    {
+      *copy++ = c;
+      our_checksum += c;
+    }
+  *copy++ = '\0';               /* terminate the copy */
+
+  if (c == 0)                   /* ??? Protocol error? (paranoia) */
+    {
+        /* PROTOCOL ERROR (missing '#') */
+      /*NACK_PKT( );*/    /*<ETHERNET>*/
+      return;
+    }
+  their_checksum  = hex( lan_next_queue_char ( &lan_input_queue ) ) << 4;
+  their_checksum += hex( lan_next_queue_char ( &lan_input_queue ) );
+
+  /* Now reset the queue packet-recognition bits */
+  discard_packet( );
+
+  if ( remote_debug ||
+      our_checksum == their_checksum )
+    {
+      ACK_PKT( );      /* good packet */
+      /* Parse and process the packet */
+      handle_request( inbuffer );
+    }
+  else
+      /* PROTOCOL ERROR (bad check sum) */
+    NACK_PKT( );
+}
+
+/* EMC will provide a better implementation
+   (perhaps just of LAN_PUT_CHAR) that does not block.
+   For now, this works.  */
+
+
+static void
+putpacket( char *str )
+{
+  unsigned char checksum;
+
+  /* '$'<packet>'#'<checksum> */
+
+  if ( VIA_ETHERNET == gdb_host_comm )
+  {
+    char  *p_out;
+    long  length;
+
+    p_out  = eth_outbuffer;
+    length = 0;
+
+
+    if ( YES == gdb_cat_ack )
+    {
+      *p_out++ = '+';
+      ++length;
+    }
+
+    gdb_cat_ack = NO;
+
+
+    *p_out++ = '$';
+    ++length;
+
+    checksum = 0;
+
+    while ( *str )
+    {
+      *p_out++ = *str;
+      ++length;
+      checksum += *str++;
+    }
+
+    *p_out++ = '#';
+    *p_out++ = hexchars[checksum >> 4];
+    *p_out = hexchars[checksum % 16];
+    length += 3;
+
+    eth_to_gdb( (UCHAR *) eth_outbuffer, length );
+  }
+
+  else
+  {
+
+      /* via RS-232 */
+    do {
+      LAN_PUT_CHAR( '$' );
+      checksum = 0;
+
+      while ( *str )
+        {
+          LAN_PUT_CHAR( *str );
+          checksum += *str++;
+        }
+
+      LAN_PUT_CHAR( '#' );
+      LAN_PUT_CHAR( hexchars[checksum >> 4] );
+      LAN_PUT_CHAR( hexchars[checksum % 16] );
+    } while ( 0 /* get_debug_char( ) != '+' */ );
+    /* XXX FIXME: not waiting for the ack. */
+
+  }
+
+}
+
+
+/*-----------------------------------------------------------------------------
+ *
+ * FUNCTION NAME:   gdb_get_eth_input
+ *
+ *
+ * DESCRIPTION:
+ *
+ *
+ * RETURN VALUE:    None.
+ *
+ *
+ * USED GLOBAL VARIABLES:
+ *
+ *
+ * AFFECTED GLOBAL VARIABLES/SIDE EFFECTS:
+ *
+ *
+ * NOTES:
+ *
+ *
+ *---------------------------------------------------------------------------*/
+
+void    gdb_get_eth_input( unsigned char *buf, long length )
+
+{
+
+  gdb_host_comm = VIA_ETHERNET;
+
+  for ( ; 0 < length; ++buf, --length)
+  {
+
+    if ( *buf == CONTROL_C )
+    {
+        /* can't stop the target, but we can tell gdb to stop waiting... */
+      discard_packet( );
+      putpacket( "S03" );       /* send back SIGINT to the debugger */
+    }
+
+    else
+    {
+      lan_add_to_queue( (long) *buf, &lan_input_queue );
+      get_gdb_input( (long) *buf, &lan_input_queue );
+    }
+
+  }
+
+
+  return;
+}
+/* end of 'gdb_get_eth_input'
+ *===========================================================================*/
+
+
+
+
+/* STDOUT STDOUT STDOUT STDOUT STDOUT STDOUT STDOUT STDOUT STDOUT STDOUT
+   Stuff pertaining to simulating stdout by sending chars to gdb to be echoed.
+
+   Dear reader:
+       This code is based on the premise that if GDB receives a packet
+   from the stub that begins with the character CAPITAL-OH, GDB will
+   echo the rest of the packet to GDB's console / stdout.  This gives
+   the stub a way to send a message directly to the user.  In practice,
+   (as currently implemented), GDB will only accept such a packet when
+   it believes the target to be running (ie. when you say STEP or
+   CONTINUE); at other times it does not expect it.  This will probably
+   change as a side effect of the "asynchronous" behavior.
+
+   Functions: gdb_putchar(char ch)
+              gdb_write(char *str, int len)
+              gdb_puts(char *str)
+              gdb_error(char *format, char *parm)
+ */
+
+#if 0 /* avoid compiler warning while this is not used */
+
+/* Function: gdb_putchar(int)
+   Make gdb write a char to stdout.
+   Returns: the char */
+
+static int
+gdb_putchar( long ch )
+{
+  char buf[4];
+
+  buf[0] = 'O';
+  buf[1] = hexchars[ch >> 4];
+  buf[2] = hexchars[ch & 0x0F];
+  buf[3] = 0;
+  putpacket( buf );
+  return ch;
+}
+#endif
+
+/* Function: gdb_write(char *, int)
+   Make gdb write n bytes to stdout (not assumed to be null-terminated).
+   Returns: number of bytes written */
+
+static int
+gdb_write( char *data, long len )
+{
+  char *buf, *cpy;
+  long i;
+
+  buf = outbuffer;
+  buf[0] = 'O';
+  i = 0;
+  while ( i < len )
+    {
+      for ( cpy = buf+1;
+           i < len && cpy < buf + BUFMAX - 3;
+           i++ )
+        {
+          *cpy++ = hexchars[data[i] >> 4];
+          *cpy++ = hexchars[data[i] & 0x0F];
+        }
+      *cpy = 0;
+      putpacket( buf );
+    }
+  return len;
+}
+
+/* Function: gdb_puts(char *)
+   Make gdb write a null-terminated string to stdout.
+   Returns: the length of the string */
+
+static int
+gdb_puts( char *str )
+{
+  return gdb_write( str, strlen( str ) );
+}
+
+/* Function: gdb_error(char *, char *)
+   Send an error message to gdb's stdout.
+   First string may have 1 (one) optional "%s" in it, which
+   will cause the optional second string to be inserted.  */
+
+#if 0
+static void
+gdb_error( char *format, char *parm )
+{
+  static char buf[400];
+  char *cpy;
+  long len;
+
+  if ( remote_debug )
+    {
+      if ( format && *format )
+        len = strlen( format );
+      else
+        return;             /* empty input */
+
+      if ( parm && *parm )
+        len += strlen( parm );
+
+      for ( cpy = buf; *format; )
+        {
+          if ( format[0] == '%' && format[1] == 's' ) /* include 2nd string */
+            {
+              format += 2;          /* advance two chars instead of just one */
+              while ( parm && *parm )
+                *cpy++ = *parm++;
+            }
+          else
+            *cpy++ = *format++;
+        }
+      *cpy = '\0';
+      gdb_puts( buf );
+    }
+}
+#endif
+
+static void gdb_note (char *, int);
+static int  error_ret (int, char *, int);
+
+static unsigned long
+elinum_to_index (unsigned long elinum)
+{
+  if ((elinum & 0xf0) == 0xd0)
+    return (elinum & 0x0f);
+  else if ((elinum & 0xf0) == 0xa0)
+    return (elinum & 0x0f) + 8;
+  else
+    return -1;
+}
+
+static long
+index_to_elinum (unsigned long index)
+{
+  if (index <= 7)
+    return index + 0xd0;
+  else if (index <= 15)
+    return (index - 8) + 0xa0;
+  else
+    return -1;
+}
+
+
+/*
+  READMEM READMEM READMEM READMEM READMEM READMEM READMEM READMEM READMEM
+
+  The following code pertains to reading memory from the target.
+  Some sort of exception handling should be added to make it safe.
+
+  READMEM READMEM READMEM READMEM READMEM READMEM READMEM READMEM READMEM
+
+  Safe Memory Access:
+
+  All reads and writes into the application's memory will pass thru
+  get_uchar() or set_uchar(), which check whether accessing their
+  argument is legal before actual access (thus avoiding a bus error).
+
+  */
+
+enum { SUCCESS = 0, FAIL = -1 };
+
+#if 0
+static long get_uchar ( const unsigned char * );
+#endif
+static long set_uchar ( unsigned char *, unsigned char );
+static long read_access_violation ( const void * );
+static long write_access_violation ( const void * );
+static long read_access_range(const void *, long);
+static DTC_RESPONSE find_memory(unsigned char *,long,unsigned char **,long *);
+
+static int
+dtc_error_ret (int ret, char *src, DTC_RESPONSE code)
+{
+  if (src)
+    sprintp (spare_buffer,
+             "'%s' returned DTC error '%s'.\n", src, get_err_text (code));
+  else
+    sprintp (spare_buffer, "DTC error '%s'.\n", get_err_text (code));
+
+  gdb_puts (spare_buffer);
+  return ret;
+}
+
+
+#if 0
+/* I think this function is unnecessary since the introduction of
+   adbg_find_memory_addr_in_frame.  */
+
+/* Return the number of expressions in the format associated with a
+   given trace frame.  */
+static int
+count_frame_exprs (FRAME_DEF *frame)
+{
+  CFD *format;
+  T_EXPR *expr;
+  int num_exprs;
+
+  /* Get the format from the frame.  */
+  get_frame_format_pointer (frame, &format);
+
+  /* Walk the linked list of expressions, and count the number of
+     expressions we find there.  */
+  num_exprs = 0;
+  for (expr = format->p_cfd_expr; expr; expr = expr->next)
+    num_exprs++;
+
+  return num_exprs;
+}
+#endif
+
+#if 0
+/* Function: get_frame_addr
+ *
+ * Description: If the input memory address was collected in the
+ *     current trace frame, then lookup and return the address
+ *     from within the trace buffer from which the collected byte
+ * may be retrieved.  Else return -1.  */
+
+unsigned char *
+get_frame_addr ( const unsigned char *addr )
+{
+  unsigned char *base, *regs, *stack, *mem;
+  CFD *dummy;
+  DTC_RESPONSE ret;
+
+  /* first, see if addr is on the saved piece of stack for curframe */
+  if (curframe.format->stack_size > 0 &&
+      (base = (unsigned char *) curframe.traceregs[A7]) <= addr  &&
+      addr < base + curframe.format->stack_size)
+    {
+      gdb_puts("STUB: get_frame_addr: call get_addr_to_frame_regs_stack_mem\n");
+      if ((ret = get_addr_to_frame_regs_stack_mem (curframe.frame_data,
+						   &dummy,
+						   (void *) &regs,
+						   (void *) &stack,
+                                                   (void *) &mem))
+          != OK_TARGET_RESPONSE)
+        return (void *) dtc_error_ret (-1,
+                                       "get_addr_to_frame_regs_stack_mem",
+                                       ret);
+      else
+        return stack + (addr - base);
+    }
+
+  /* Next, try to find addr in the current frame's expression-
+     collected memory blocks.  I'm sure this is at least quadradic in
+     time.  */
+  {
+    int num_exprs = count_frame_exprs (curframe.frame_data);
+    int expr, block;
+
+    /* Try each expression in turn.  */
+    for (expr = 0; expr < num_exprs; expr++)
+      {
+	for (block = 0; ; block++)
+	  {
+	    T_EXPR_DATA *data;
+	    if (adbg_get_expr_data (curframe.frame_data,
+				    'x', expr, block,
+				    &data)
+		!= OK_TARGET_RESPONSE)
+	      break;
+	    else if ((unsigned char *) data->address <= addr
+		     && addr < ((unsigned char *) data->address + data->size))
+	      {
+		/* We have found the right block; is it valid data?
+		   Upper-case stamps mean bad data.  */
+		if ('A' <= data->stamp && data->stamp <= 'Z')
+		  {
+		    gdb_puts("STUB: get_frame_addr: adbg_get_expr_data INVALID\n");
+		    return (unsigned char *) -1;
+		  }
+		else
+		  {
+		    if (remote_debug > 1)
+		      {
+			sprintp(spare_buffer,
+				"STUB: get_frame_addr: got it [%x,%x)\n",
+				data->address, data->address + data->size);
+			gdb_puts(spare_buffer);
+		      }
+
+		    return (((unsigned char *) &data->data)
+			    + (addr - (unsigned char *) data->address));
+		  }
+	      }
+	  }
+      }
+  }
+
+  /* not found, return error */
+  return (unsigned char *) -1;
+}
+
+/*============================================================*/
+
+static long get_uchar ( const unsigned char * addr )
+{
+  unsigned char *frame_addr;
+
+  if ( read_access_violation ( addr ) )
+    return ( -1 ); /* Access error */
+
+  if (curframe.valid)   /* if debugging a trace frame? */
+    {
+      /* If the requested address was collected in the current frame,
+       * then fetch and return the data from the trace buffer.
+       */
+      if ((frame_addr = get_frame_addr (addr)) != (unsigned char *) -1)
+        return ( *frame_addr );
+      /* If the requested address is in the Code Section,
+       * let's be magnanimous and read it anyway (else we shall
+       * not be able to disassemble, find function prologues, etc.)
+       */
+      else if (CS_CODE_START <= (unsigned long) addr &&
+               (unsigned long) addr < CS_CODE_START + CS_CODE_SIZE)
+        return (*addr);
+      else
+        return ( -1 );  /* "Access error" (the data was not collected) */
+    }
+  else
+    /* Not debugging a trace frame, read the data from live memory. */
+    return ( *addr ); /* Meaningful result >= 0 */
+}
+#endif
+
+/*============================================================*/
+
+static long set_uchar ( unsigned char * addr, unsigned char val )
+{
+  long check_result = write_access_violation ( addr );
+
+  if ( check_result != 0L )
+    return ( check_result ); /* Access error */
+
+  return ( *addr = val );    /* Successful writing */
+}
+
+/*============================================================*/
+
+/*
+ * Function read_access_violation() below returns TRUE if dereferencing
+ * its argument for reading would cause a bus error - and FALSE otherwise:
+ */
+
+static long read_access_violation ( const void * addr )
+{
+  return ( ( ( addr < SRAM_START ) || ( addr >= SRAM_END ) ) &&
+           ( ( addr < NVD_START )  || ( addr >= NVD_END ) ) );
+}
+
+/*============================================================*/
+
+/*
+ * Function write_access_violation() below returns zero if dereferencing
+ * its argument for writing is safe, -1 on a soft error (the argument
+ * falls into the write-protected area), -2 on a hard error (the argument
+ * points to a non-existent memory location). In other words, it returns
+ * FALSE when no bus error is expected - and an error code otherwise:
+ */
+
+static long write_access_violation ( const void * addr )
+{
+  /*
+   * The boundaries of the write-protected area have to be received via
+   * an API provided in the Symmetrix core code. For now, these limits
+   * are hard-coded:
+   */
+
+  if ( ( addr >= RO_AREA_START ) && ( addr < RO_AREA_END ) )
+    return ( -1 ); /* soft error */
+
+  if ( ( ( addr < SRAM_START ) || ( addr >= SRAM_END ) ) &&
+       ( ( addr < NVD_START )  || ( addr >= NVD_END ) ) )
+    return ( -2 ); /* hard error */
+
+  return ( 0 );
+}
+
+
+/* read_access_range is like read_access_violation,
+   but returns the number of bytes we can read w/o faulting.
+   that is, it checks an address range and tells us what portion
+   (if any) of the prefix is safe to read without a bus error */
+static long
+read_access_range(const void *addr, long count)
+{
+  if ((addr >= SRAM_START) && (addr < SRAM_END))
+    {
+      if ((char *)addr + count < (char *)SRAM_END)
+	return (count);
+      else
+	return ((char *)SRAM_END - (char *)addr);
+    }
+  else if (((char *)addr >= (char *)NVD_START) &&
+	   ((char *)addr < (char *)NVD_END))
+    {
+      if ((char *)addr + count < (char *)NVD_END)
+	return (count);
+      else
+	return ((char *)NVD_END - (char *)addr);
+    }
+  else
+    return (0);
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+   Return SUCCESS or FAIL.
+   If MAY_FAULT is non-zero, then we should return FAIL in response to
+   a fault; if zero treat a fault like any other fault in the stub.  */
+
+static long
+mem2hex(unsigned char *mem, char *buf, long count, long may_fault)
+{
+  long ndx;
+  long ndx2;
+  long ch;
+  long incr;
+  unsigned char *location;
+  DTC_RESPONSE status;
+
+  if (may_fault)
+    {
+      for (ndx = 0, incr = 1; (ndx < count) && (incr > 0); ndx += incr)
+	{
+	  status = find_memory(mem, count - ndx, &location, &incr);
+
+	  if (status == OK_TARGET_RESPONSE)
+	    {
+	      if (incr > 0)
+		{
+		  for (ndx2 = 0; ndx2 < incr; ndx2++)
+		    {
+		      ch = *location++;
+		      *buf++ = hexchars[ch >> 4];
+		      *buf++ = hexchars[ch & 0xf];
+		    }
+		  mem += incr;
+		}
+	      else if (incr <= 0) /* should never happen */
+		{
+		  *buf = 0;
+		  return (0);
+		}
+	    }
+	  else if (status == NOT_FOUND_TARGET_RESPONSE)
+	    {
+	      *buf = 0;
+	      return (ndx);	/* return amount copied */
+	    }
+	  else
+	    {
+	      *buf = 0;
+	      return (0);	/* XXX: how do we tell the user the status? */
+	    }
+	}
+      *buf = 0;
+      return (count);
+    }
+  else
+    {
+      for (ndx = 0; ndx < count; ndx++)
+	{
+	  ch = *mem++;
+	  *buf++ = hexchars[ch >> 4];
+	  *buf++ = hexchars[ch & 0xf];
+	}
+      *buf = 0;
+      return (count);		/* we copied everything */
+    }
+}
+
+static DTC_RESPONSE
+find_memory(unsigned char *mem, long count,
+	    unsigned char **location, long *incr)
+{
+  DTC_RESPONSE retval;
+  long length;
+
+  /* figure out how much of the memory range we can read w/o faulting */
+  count = read_access_range(mem, count);
+  if (count == 0)
+    return (NOT_FOUND_TARGET_RESPONSE);
+
+  if (curframe.valid)
+    {
+      unsigned char *mem_block;
+      unsigned char *mem_addr;
+      unsigned long mem_size;
+      unsigned long mem_stamp;
+
+      retval = adbg_find_memory_addr_in_frame(curframe.frame_data, mem,
+					      (unsigned long **)&mem_block,
+					      (unsigned long **)&mem_addr,
+					      &mem_size, &mem_stamp);
+
+      switch (retval)
+	{
+	case OK_TARGET_RESPONSE:
+#if 0
+	  printp("FOUND: mem %x block %x addr %x size %d stamp %x\n",
+		 mem, mem_block, mem_addr, mem_size, mem_stamp);
+#endif
+	  *location = mem_block + (mem - mem_addr);
+	  length = mem_size - (mem - mem_addr);;
+
+	  if (length < count)
+	    *incr = length;
+	  else
+	    *incr = count;
+
+	  break;
+
+	case NOT_FOUND_TARGET_RESPONSE:
+	case NEAR_FOUND_TARGET_RESPONSE:
+#if 0
+	  printp("NOT FOUND: mem %x, checking code region\n", mem);
+#endif
+	  /* check to see if it's in the code region */
+	  if ((CS_CODE_START <= (long)mem) &&
+	      ((long)mem < CS_CODE_START + CS_CODE_SIZE))
+	    {
+	      /* some or all of the address range is in the code */
+	      *location = mem;
+	      if ((long)mem + count <= CS_CODE_START + CS_CODE_SIZE)
+		*incr = count; /* it's totally in the code */
+	      else
+		/* how much is in the code? */
+		*incr = CS_CODE_START + CS_CODE_SIZE - (long)mem;
+#if 0
+	      printp("FOUND in code region: %x\n", mem);
+#endif
+	      retval = OK_TARGET_RESPONSE;
+	    }
+	  else
+	    retval = NOT_FOUND_TARGET_RESPONSE;
+
+	  break;
+
+	default:
+#if 0
+	  printp("BAD RETURN: %d\n", retval);
+#endif
+	  retval = NOT_FOUND_TARGET_RESPONSE;
+	  break;
+	}
+    }
+  else
+    {
+      *location = mem;
+      *incr = count;
+      retval = OK_TARGET_RESPONSE;
+    }
+
+  return (retval);
+}
+
+/* Convert the hex array pointed to by buf into binary to be placed in mem.
+   Return SUCCESS or FAIL.  */
+
+static long
+hex2mem( char *buf, unsigned char *mem, long count, long may_fault )
+{
+  long i, ch;
+
+  for ( i=0; i<count; i++ )
+    {
+      ch = hex( *buf++ ) << 4;
+      ch = ch + hex( *buf++ );
+      if ( may_fault )
+        {
+          ch = set_uchar( mem++, ch );
+          if ( ch < 0 )    /* negative return indicates error */
+            return FAIL;
+        }
+      else
+        *mem++ = ch;
+    }
+  return SUCCESS;
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED           */
+/**********************************************/
+
+static int
+hexToInt( char **ptr, unsigned long *intValue )
+{
+  long numChars = 0;
+  long hexValue;
+
+  *intValue = 0;
+  while ( **ptr )
+    {
+      hexValue = hex( **ptr );
+      if ( hexValue >=0 )
+        {
+          *intValue = (*intValue << 4) | hexValue;
+          numChars ++;
+        }
+      else
+        break;
+      (*ptr)++;
+    }
+  return numChars;
+}
+
+static volatile long gdb_handling_trap1;
+static volatile long gdb_handling_sstrace;
+static volatile long gdb_signo;
+
+/*
+   Here is the "callable" stub entry point.
+   Call this function with a GDB request as an argument,
+   and it will service the request and return.
+
+   May be further broken up as we go along, with individual requests
+   broken out as separate functions.
+ */
+
+static char * handle_trace_query (char *);
+static char * handle_trace_set (char *);
+static int    handle_format (char **request, CFD *format);
+static unsigned long crc32 (unsigned char *buf, int len, unsigned long crc);
+static char * crc_query (char *);
+static char * handle_test (char *);
+
+void
+handle_request( char *request )
+{
+#if 0
+  remote_debug = 2;
+#endif
+  switch( *request++ )
+    {
+    case 'k':		/* "kill" */
+      curframe.valid = FALSE;
+      putpacket ("");
+      break;
+    case 'D':		/* "detach" */
+      curframe.valid = FALSE;
+      putpacket ("");
+      break;
+    default:            /* Unknown code.  Return an empty reply message. */
+      putpacket( "" );  /* return empty packet */
+      break;
+
+    case 'H':           /* Set thread for subsequent operations.
+    Hct...                 c = 'c' for thread used in step and continue;
+                           t... can be -1 for all threads.
+                           c = 'g' for thread used in other operations.
+                           If zero, pick a thread, any thread.  */
+
+      putpacket( "OK" );
+      break;
+
+    case 'g':           /* Read registers.
+                           Each byte of register data is described by
+                           two hex digits.  registers are in the
+                           internal order for GDB, and the bytes in a
+                           register are in the same order the machine
+                           uses.  */
+      {
+        /* Return the values in (one of) the registers cache(s).
+           Several situations may pertain:
+           1) We're synchronous, in which case the "registers" array
+              should actually be current.
+           2) We're asynchronous, in which case the "registers" array
+              holds whatever was cached most recently.
+           3) We're looking at a trace frame that was collected earlier:
+              we will return those earlier registers.
+         */
+
+        /* all registers default to zero */
+        memset (outbuffer, '0', NUMREGBYTES);
+        outbuffer[NUMREGBYTES] = '\0';
+
+        if (curframe.valid)     /* debugging a trace frame */
+          mem2hex( (unsigned char*) curframe.traceregs,
+                  outbuffer, NUMREGBYTES, 0 );
+        else
+          mem2hex( (unsigned char*) registers, outbuffer, NUMREGBYTES, 0 );
+
+        putpacket( outbuffer );
+      }
+      break;
+    case 'G':           /* Write registers.
+    Gxxxxxxxx              Each byte of register data is described by
+                           two hex digits.  */
+      if (curframe.valid)       /* debugging a trace frame */
+        putpacket ("E03");      /* can't write regs into a trace frame! */
+      else
+        {
+          /* Write the values into the local registers cache...
+             Note that no actual registers are being changed.  */
+
+          hex2mem( request,
+                  (unsigned char *) registers, NUMREGBYTES, 0 );
+          putpacket( "OK" );
+        }
+      break;
+    case 'P':           /* Write (single) register.
+    Pnn=xxxxxxxx           register nn gets value xxxxxxxx;
+                           two hex digits for each byte in the register
+                           (target byte order).  */
+
+      if (curframe.valid)
+        putpacket ("E03");      /* can't write regs into a trace frame! */
+      else
+        {
+          unsigned long regno;
+
+          if ( hexToInt( &request, &regno ) && *(request++) == '=' )
+            {
+              if ( regno < NUMREGS )
+                {
+                  hexToInt( &request,
+                           (unsigned long *) &registers[REGISTER_BYTE(regno)]);
+
+                  putpacket( "OK" );
+                }
+              else
+                putpacket( "E01" );   /* bad packet or regno */
+            }
+        }
+      break;
+    case 'm':           /* Read memory.
+    mAAAAAAAA,LLLL         AAAAAAAA is address, LLLL is length.
+                           Reply can be fewer bytes than requested
+                           if able to read only part of the data.  */
+      {
+        unsigned long addr, len;
+
+        if ( hexToInt( &request, &addr )    &&
+             *(request++) == ','            &&
+             hexToInt( &request, &len ) )
+          {
+            /* better not overwrite outbuffer! */
+            if ( len > (BUFMAX / 2) - 5 )
+              len = (BUFMAX / 2) - 5;
+            if (mem2hex((unsigned char *) addr, outbuffer, len, 1) == 0) /* XXX: eventually use returned value */
+              putpacket( "E03" );       /* read fault (access denied) */
+            else
+              putpacket( outbuffer );   /* read succeeded */
+          }
+        else
+          putpacket( "E01" );           /* badly formed read request */
+
+      }
+      break;
+    case 'M':           /* Write memory.
+    Maaaaaaaa,llll:xxxx    aaaaaaaa is address, llll is length;
+                           xxxx is data to write.  */
+
+      {
+        unsigned long addr, len;
+
+        if (curframe.valid)     /* can't write memory into a trace frame! */
+          putpacket ("E03");    /* "access denied" */
+        else /*** if ( write_access_enabled ) ***/
+          {
+            if ( hexToInt( &request, &addr )  &&
+                 *(request++) == ','          &&
+                 hexToInt( &request, &len )   &&
+                 *(request++) == ':' )
+              {
+                if (len == 2 &&
+                    addr >= CS_CODE_START &&
+                    addr <= LAST_CS_WORD)
+                  {
+                    unsigned long val;
+
+                    if ( !hexToInt( &request, &val ) ||
+                         write_to_protected_mem( (void *)addr, val ) )
+                      putpacket( "E03" );   /* write fault (access denied) */
+                    else
+                      putpacket( "OK" );    /* write succeeded */
+                  }
+                else
+                  {
+                    if ( hex2mem( request, (unsigned char*) addr, len, 1 ) )
+                      putpacket( "E03" );   /* write fault (access denied) */
+                    else
+                      putpacket( "OK" );    /* write succeeded */
+                  }
+              }
+            else
+                putpacket( "E02" );     /* badly formed write request */
+          }
+      }
+      break;
+    case 'c':           /* Continue.
+    cAAAAAAAA              AAAAAAAA is address from which to resume.
+                           If omitted, resume at current PC.  */
+
+      {
+        unsigned long addr;
+
+	if (curframe.valid)
+	  {
+	    /* Don't continue if debugging a trace frame! */
+	    gdb_puts ("Error: can't continue!\n");
+	    putpacket ("S03");
+	  }
+	else
+	  {
+	    gdb_signo = 3;
+	    if (isxdigit(request[0]))
+	      {
+		hexToInt(&request, &addr);
+		registers[REGISTER_BYTE(PC)] = addr;
+	      }
+
+	    gdb_handling_trap1 = FALSE;
+	    gdb_handling_sstrace = FALSE;
+	    sss_trace_flag = '\0';
+	  }
+      }
+      break;
+    case 's':           /* Step.
+    sAAAAAAAA              AAAAAAAA is address from which to begin stepping.
+                           If omitted, begin stepping at current PC.  */
+      {
+        unsigned long addr;
+
+	if (curframe.valid)
+	  {
+	    /* Don't step if debugging a trace frame! */
+	    gdb_puts ("Error: can't step!\n");
+	    putpacket ("S03");
+	  }
+	else
+	  {
+	    gdb_signo = 3;
+	    if (isxdigit(request[0]))
+	      {
+		hexToInt(&request, &addr);
+		registers[REGISTER_BYTE(PC)] = addr;
+	      }
+
+	    gdb_handling_trap1 = FALSE;
+	    gdb_handling_sstrace = FALSE;
+	    sss_trace_flag = 't';
+	  }
+      }
+      break;
+    case 'C':           /* Continue with signal.
+    Cxx;AAAAAAAA           xx is signal number in hex;
+                           AAAAAAAA is adddress from which to resume.
+                           If ;AAAAAAAA omitted, continue from PC.   */
+
+      {
+        unsigned long addr = 0;
+
+        if (!gdb_handling_trap1 || curframe.valid)
+          {
+	    /* Don't continue if not currently in synchronous mode,
+	       or if currently debugging a trace frame!  */
+            gdb_puts( "Error: can't continue!\n" );
+            putpacket( "S03" );       /* "sigquit"  (better idea?) */
+          }
+        else
+          {
+	    gdb_signo = 3;
+            if ( isxdigit( *request ) )
+              {
+                hex2mem( request, (unsigned char *) &gdb_signo, 2, 0 );
+                request += 2;
+                if ( *request == ';' && isxdigit( *++request ) )
+                  {
+                    hexToInt( &request, &addr );
+                    registers[REGISTER_BYTE(PC)] = addr;
+                  }
+              }
+            gdb_handling_trap1 = FALSE;
+            gdb_handling_sstrace = FALSE;
+            sss_trace_flag = '\0';
+          }
+      }
+      break;
+    case 'S':           /* Step with signal.
+    Sxx;AAAAAAAA           xx is signal number in hex;
+                           AAAAAAAA is adddress from which to begin stepping.
+                           If ;AAAAAAAA omitted, begin stepping from PC.   */
+      {
+        unsigned long addr = 0;
+
+        if (!gdb_handling_trap1 || curframe.valid)
+          {
+	    /* Don't step if not currently in synchronous mode,
+	       or if currently debugging a trace frame!  */
+            gdb_puts( "Error: can't step!\n" );
+            putpacket( "S03" );       /* "sigquit"  (better idea?) */
+          }
+        else
+          {
+	    gdb_signo = 3;
+            if ( isxdigit( *request ) )
+              {
+                hex2mem( request, (unsigned char *) &gdb_signo, 2, 0 );
+                request += 2;
+                if ( *request == ';' && isxdigit( *++request ) )
+                  {
+                    hexToInt( &request, &addr );
+                    registers[REGISTER_BYTE(PC)] = addr;
+                  }
+              }
+            gdb_handling_trap1 = FALSE;
+            gdb_handling_sstrace = FALSE;
+            sss_trace_flag = 't';
+          }
+      }
+      break;
+    case '?':           /* Query the latest reason for stopping.
+                           Should be same reply as was last generated
+                           for step or continue.  */
+
+      if ( gdb_signo == 0 )
+        gdb_signo = 3;  /* default to SIGQUIT */
+      outbuffer[ 0 ] = 'S';
+      outbuffer[ 1 ] = hexchars[ gdb_signo >>  4 ];
+      outbuffer[ 2 ] = hexchars[ gdb_signo & 0xf ];
+      outbuffer[ 3 ] = 0;
+      putpacket( outbuffer );
+      break;
+
+    case 'd':           /* Toggle debug mode
+                           I'm sure we can think of something interesting.  */
+
+      remote_debug = !remote_debug;
+      putpacket( "" );  /* return empty packet */
+      break;
+
+    case 'q':           /* general query */
+      switch (*request++)
+        {
+        default:
+          putpacket ("");       /* nak a request which we don't handle */
+          break;
+        case 'T':               /* trace query */
+          putpacket (handle_trace_query (request));
+          break;
+	case 'C':		/* crc query (?) */
+	  if (*request++ == 'R' &&
+	      *request++ == 'C' &&
+	      *request++ == ':')
+	    putpacket (crc_query (request));
+	  else
+	    putpacket ("");	/* unknown query */
+	  break;
+        }
+      break;
+
+    case 'Q':                   /* general set */
+      switch (*request++)
+        {
+        default:
+          putpacket ("");       /* nak a request which we don't handle */
+          break;
+        case 'T':               /* trace */
+          putpacket (handle_trace_set (request));
+          break;
+        }
+      break;
+
+    case 'T':
+      /* call test function: TAAA,BBB,CCC 
+	 A, B, and C are arguments to pass to gdb_c_test.  Reply is
+	 "E01" (bad arguments) or "OK" (test function called).  */
+      putpacket (handle_test (request));
+      break;
+    }
+}
+
+static TDP_SETUP_INFO tdp_temp;
+static int trace_running;
+
+/*
+ * Function msgcmp:
+ *
+ * If second argument (str) is matched in first argument,
+ *    then advance first argument past end of str and return "SAME"
+ * else return "DIFFERENT" without changing first argument.
+ *
+ * Return: zero for DIFFERENT, non-zero for SUCCESS
+ */
+
+static int
+msgcmp (char **msgp, char *str)
+{
+  char *next;
+
+  if (msgp != 0 && str != 0)    /* input validation */
+    if ((next = *msgp) != 0)
+      {
+        for (;
+             *next && *str && *next == *str;
+             next++, str++)
+          ;
+
+        if (*str == 0)                  /* matched all of str in msg */
+          return (int) (*msgp = next);  /* advance msg ptr past str  */
+      }
+  return 0;                             /* failure */
+}
+
+static char *
+handle_trace_query (char *request)
+{
+  if (msgcmp (&request, "Status"))
+    {
+      if (adbg_check_if_active ())
+	{
+	  gdb_puts ("Target trace is running.\n");
+	  return "T1";
+	}
+      else
+	{
+	  gdb_puts ("Target trace not running.\n");
+	  trace_running = 0;
+	  return "T0";
+	}
+    }
+  else                  /* unknown trace query */
+    {
+      return "";
+    }
+}
+
+static void
+gdb_note (char *fmt, int arg1)
+{
+  if (remote_debug > 1)
+    {
+      sprintp (spare_buffer, fmt, arg1);
+      gdb_puts (spare_buffer);
+    }
+}
+
+static int
+error_ret (int ret, char *fmt, int arg1)
+{
+  if (remote_debug > 0)
+    {
+      sprintp (spare_buffer, fmt, arg1);
+      gdb_puts (spare_buffer);
+    }
+  return ret;
+}
+
+static int
+handle_format (char **request, COLLECTION_FORMAT_DEF *format)
+{
+  MEMRANGE_DEF m;
+  DTC_RESPONSE ret;
+  int elinum;
+  unsigned long regnum;
+  long bytecodes[(MAX_BYTE_CODES + sizeof (struct t_expr_tag))/ 4];
+  struct t_expr_tag *t_expr = (struct t_expr_tag *)bytecodes;
+
+  if (format->id == 0)
+    {
+      if ((ret = get_unused_format_id (&format->id)) != OK_TARGET_RESPONSE)
+	return dtc_error_ret (-1, "get_unused_format_id", ret);
+
+      if (**request == 'R')
+	{
+	  (*request)++;
+	  hexToInt (request, &format->regs_mask);
+	}
+      gdb_note ("STUB: call define_format (id = %d, ", format->id);
+      gdb_note ("regs_mask = 0x%X);\n", format->regs_mask);
+
+      if ((ret = define_format (format)) != OK_TARGET_RESPONSE)
+	{
+	  sprintp (spare_buffer,
+		   "'define_format': DTC error '%s' for format id %d.\n",
+		   get_err_text (ret),
+		   format->id);
+	  gdb_puts (spare_buffer);
+	  return -1;
+	}
+    }
+
+  while ((**request == 'M') || (**request == 'X'))
+    {
+      switch (**request)
+	{
+	case 'M':		/* M<regnum>,<offset>,<size> */
+	  (*request)++;
+	  hexToInt(request, &regnum);
+
+	  if (regnum == 0 || regnum == (unsigned long) -1)
+	    m.typecode = -1;
+	  else if ((elinum = index_to_elinum (regnum)) > 0)
+	    m.typecode = elinum;
+	  else
+	    return error_ret (-1,
+			      "Memrange register %d is not between 0 and 15\n",
+			      regnum);
+
+	  if (*(*request)++ != ',')
+	    return error_ret (-1,"Malformed memrange (comma #%d missing)\n",1);
+	  hexToInt(request, &m.offset);
+	  if (*(*request)++ != ',')
+	    return error_ret (-1,"Malformed memrange (comma #%d missing)\n",2);
+	  hexToInt(request, &m.size);
+
+	  gdb_note ("STUB: call add_format_mem_range (typecode =  0x%x, ",
+		    m.typecode);
+	  gdb_note ("offset = 0x%X, ", m.offset);
+	  gdb_note ("size = %d);\n", m.size);
+	  if ((ret = add_format_mem_ranges (format->id, &m)) != 
+	      OK_TARGET_RESPONSE)
+	    {
+	      dtc_error_ret (-1, "add_format_mem_ranges", ret);
+	      sprintp (spare_buffer,
+		       "format id %d: memrange (0x%x, 0x%x, 0x%x).\n",
+		       format->id, m.typecode, m.offset, m.size);
+	      gdb_puts (spare_buffer);
+	      return -1;
+	    }
+	  break;
+
+	case 'X':		/* X<length>,<bytecodes> */
+	  {
+	    unsigned long length;
+
+	    (*request)++;
+	    hexToInt(request, &length);
+
+	    if ((length <= 0) || (length > MAX_BYTE_CODES))
+	      return error_ret (-1, 
+				"Bytecode expression length (%d) too large\n",
+				length);
+
+	    if (*(*request)++ != ',')
+	      return error_ret (-1, 
+				"Malformed bytecode expr (comma#%d missing)\n",
+				1);
+	    t_expr->next = NULL;
+	    /* subtract one to account for expr[0] in header */
+	    t_expr->size = sizeof(struct t_expr_tag) + length - 1;
+	    t_expr->expr_size = length;
+
+	    hex2mem(*request, &t_expr->expr[0], length, 0);
+	    *request += 2 * length;
+	    build_and_add_expression(format->id, t_expr);
+	  }
+	  break;
+	}
+    }
+  return 0;
+}
+
+static char *
+handle_trace_set (char *request)
+{
+  long n_frame;
+  unsigned long frameno, tdp, pc, start, stop;
+  DTC_RESPONSE ret = -1;
+  static COLLECTION_FORMAT_DEF tempfmt1;
+  static char enable;
+  static char retbuf[20];
+
+  if (msgcmp (&request, "init"))
+    {
+      gdb_note ("STUB: call clear_trace_state();\n", 0);
+      curframe.valid = 0;       /* all old frames become invalid now */
+      if ((ret = clear_trace_state ()) == OK_TARGET_RESPONSE)
+        return "OK";
+      else
+        {
+          sprintp (retbuf, "E2%x", ret);
+          return (char *) dtc_error_ret ((int) &retbuf,
+                                         "clear_trace_state",
+                                         ret);
+        }
+    }
+  else if (msgcmp (&request, "Start"))
+    {
+      trace_running = 1;
+      curframe.valid = 0;       /* all old frames become invalid now */
+      gdb_note ("STUB: call start_trace_experiment();\n", 0);
+      adbg_save_trace_in_nvd ();
+      if ((ret = start_trace_experiment ()) == OK_TARGET_RESPONSE)
+        return "OK";
+      else
+        {
+          sprintp (retbuf, "E2%x", ret);
+          return (char *) dtc_error_ret ((int) &retbuf,
+                                         "start_trace_experiment",
+                                         ret);
+        }
+    }
+  else if (msgcmp (&request, "Stop"))
+    {
+      trace_running = 0;
+      if (adbg_check_if_active ())
+	{
+	  gdb_note ("STUB: call end_trace_experiment();\n", 0);
+	  if ((ret = end_trace_experiment ()) == OK_TARGET_RESPONSE)
+	    return "OK";
+	  else
+	    {
+	      sprintp (retbuf, "E2%x", ret);
+	      return (char *) dtc_error_ret ((int) &retbuf,
+					     "end_trace_experiment",
+					     ret);
+	    }
+	}
+      else return "OK";
+    }
+  /* "TDP:" (The 'T' was consumed in handle_request.)  */
+  else if (msgcmp (&request, "DP:"))
+    {
+      /* TDP:<id>:<addr>:{D,E}:<stepcount>:<pass_limit>{R[M,X]+}<tdp-format>
+                                                     {S{R[M,X]+}}<tp-format>
+
+	 D -- disable tracepoint (illegal from EMC's point of view)
+	 E -- enable tracepoint?
+
+	 R -- regs format: R<regs-mask>
+	 M -- memory format: M<regnum>,<offset>,<size>
+	 X -- expr format: X<size>,<bytecodes>
+	 S -- fencepost between trap formats and stepping formats.
+	 */
+
+      /* state variable, required for splitting TDP packets. */
+      static int doing_step_formats;
+
+      /* 
+       * TDP: packets may now be split into multiple packets.
+       * If a TDP packet is to be continued in another packet, it
+       * must end in a "-" character.  The subsequent continuation
+       * packet will then begin with a "-" character, between the
+       * token "TDP:" and the tdp_id field.  The ID and address
+       * will be repeated in each sub-packet.  The step_count, 
+       * pass_count, and 'enabled' field must appear in the first
+       * packet.  The boundary between sub-packets may not appear
+       * between the "S" that denotes the start of stepping "formats",
+       * and the regs_mask that follows it.  The split may also not
+       * occur in the middle of either a memrange description or a
+       * bytecode string.  -- MVS
+       */
+
+      if (*request == '-')	/* this is a continuation of a 
+				   trace definition in progress */
+	{
+	  unsigned long temp_id, temp_addr;
+
+	  request++;
+	  if (!(hexToInt (&request, &temp_id) &&
+		*request++ == ':'))
+	    return "E11";           /* badly formed packet, field 1 */
+
+	  if (!(hexToInt (&request, (unsigned long *) &temp_addr) &&
+		*request++ == ':'))
+	    return "E12";           /* badly formed packet, field 2 */
+
+	  if (temp_id   != tdp_temp.id)
+	    return "E11";	/* something wrong: field 1 doesn't match */
+	  if (temp_addr != (unsigned long) tdp_temp.addr)
+	    return "E12";	/* something wrong: field 2 doesn't match */
+	}
+      else			/* This is a new TDP definition */
+	{
+	  memset ((char *) &tdp_temp, 0, sizeof (tdp_temp));
+	  memset ((char *) &tempfmt1, 0, sizeof (tempfmt1));
+	  doing_step_formats = FALSE;
+
+	  if (!(hexToInt (&request, &tdp_temp.id) &&
+		*request++ == ':'))
+	    return "E11";           /* badly formed packet, field 1 */
+
+	  if (!(hexToInt (&request, (unsigned long *) &tdp_temp.addr) &&
+		*request++ == ':'))
+	    return "E12";           /* badly formed packet, field 2 */
+
+	  if (!(((enable = *request++) == 'D' || enable == 'E') &&
+		*request++ == ':'))
+	    return "E13";           /* badly formed packet, field 3 */
+#if 0
+	  if (enable == 'D')
+	    {
+	      gdb_puts ("Disabling of tracepoints not supported by EMC target\n");
+	      return "E20";
+	    }
+#endif
+	  if (!(hexToInt (&request, &tdp_temp.stepcount) &&
+		*request++ == ':'))
+	    return "E14";           /* badly formed packet, field 4 */
+
+	  if (!hexToInt (&request, &tdp_temp.pass_limit))
+	    return "E15";           /* badly formed packet, field 5 */
+
+	}
+
+      /* Typically, the first group of collection descriptors
+	 refers to the trap collection.  There is an "S" token
+	 to act as a fencepost between collection descriptors for
+	 the trap, and those for the single-stepping.
+
+	 However, when the packet is split up into several packets,
+	 this "S" token may already have been seen in a previous
+	 sub-packet; so we have to remember it in a state variable.  */
+
+      if (*request == 'R' || *request == 'M' || *request == 'X')
+        {
+          if (handle_format (&request, &tempfmt1))
+            return "E16";
+	  if (doing_step_formats)
+	    tdp_temp.tp_format_p  = tempfmt1.id;
+	  else
+	    tdp_temp.tdp_format_p = tempfmt1.id;
+        }
+
+      /* When we see the "S" token, we remember it in a state variable
+         (in case the packet is split up and continued in another message),
+	 and discard all current state from the collection "format".  */
+      if (*request == 'S')
+	{
+	  doing_step_formats = TRUE;
+	  /* discard prev format and start a new one */
+	  memset ((char *) &tempfmt1, 0, sizeof (tempfmt1));
+	  request++;
+
+	  /* Having seen the "S" fencepost, it is now possible that
+	     we will see some more collection descriptors pertaining
+	     to the stepping collection.  */
+	  if (*request   == 'R' || *request == 'M' || *request == 'X')
+	    {
+	      if (handle_format (&request, &tempfmt1))
+		return "E17";
+	      /* new format ID is tp_format */
+	      tdp_temp.tp_format_p = tempfmt1.id;
+	    }
+	}
+
+      if (*request == '-')	/* this TDP definition will be continued. */
+	sprintp (retbuf, "OK");
+      else if (enable == 'E')	/* end of TDP definition: pass to ADBG (if enabled!) */
+	{
+	  gdb_note ("STUB: call define_tdp (id %d, ", tdp_temp.id);
+	  gdb_note ("addr 0x%X, ", (int) tdp_temp.addr);
+	  gdb_note ("passc %d, ",        tdp_temp.pass_limit);
+	  gdb_note ("stepc %d, ",        tdp_temp.stepcount);
+	  gdb_note ("TDP fmt #%d, ",     tdp_temp.tdp_format_p);
+	  gdb_note ("TP fmt #%d);\n",    tdp_temp.tp_format_p);
+	  
+	  ret = define_tdp (tdp_temp.id, &tdp_temp, 0);
+
+	  if (ret == OK_TARGET_RESPONSE)
+	    {
+	      sprintp (retbuf, "OK");
+	    }
+	  else
+	    {
+	      sprintp (spare_buffer,
+		       "'define_tdp' returned DTC error '%s' for tracepoint %d.\n",
+		       get_err_text (ret),
+		       tdp_temp.id);
+	      gdb_puts (spare_buffer);
+	      sprintp (retbuf, "E2%x", ret);
+	    }
+	  /* Redundant, but let's try to make sure this state gets discarded. */
+	  {
+	    memset ((char *) &tdp_temp, 0, sizeof (tdp_temp));
+	    memset ((char *) &tempfmt1, 0, sizeof (tempfmt1));
+	  }
+	}
+      else /* ADBG_DTC does not support disabled tracepoints -- ignore it.  */
+	gdb_note ("STUB: ignoring disabled tracepoint %d.\n", tdp_temp.id);
+
+      return retbuf;
+    }
+  else if (msgcmp (&request, "Frame:"))
+    {
+      ret = OK_TARGET_RESPONSE;
+
+      if (msgcmp (&request, "pc:"))
+        {
+          if (!hexToInt (&request, &pc))
+            return "E10";       /* badly formed packet */
+          n_frame = curframe.valid ? curframe.frame_id + 1 : 0;
+          gdb_note ("STUB: call fetch_trace_frame_pc (id %d, ", n_frame);
+          gdb_note ("pc 0x%X);\n", pc);
+          ret = fetch_trace_frame_with_pc (&n_frame,
+                                           (void *) pc,
+                                           &curframe.format,
+                                           &curframe.frame_data);
+        }
+      else if (msgcmp (&request, "tdp:"))
+        {
+          if (!hexToInt (&request, &tdp))
+            return "E10";       /* badly formed packet */
+          n_frame = curframe.valid ? curframe.frame_id + 1: 0;
+          gdb_note ("STUB: call fetch_trace_frame_tdp (id %d, ", n_frame);
+          gdb_note ("tdp 0x%X);\n", tdp);
+          ret = fetch_trace_frame_with_tdp (&n_frame,
+                                            tdp,
+                                            &curframe.format,
+                                            &curframe.frame_data);
+        }
+      else if (msgcmp (&request, "range:"))
+        {
+          if (!(hexToInt (&request, &start) &&
+                *request++ == ':'))
+            return "E11";      /* badly formed packet, field 1 */
+          else if (!hexToInt (&request, &stop))
+            return "E12";       /* badly formed packet, field 2 */
+          n_frame = curframe.valid ? curframe.frame_id + 1: 0;
+          gdb_note ("STUB: call fetch_trace_frame_range (id %d, ", n_frame);
+          gdb_note ("start 0x%X, ",   start);
+          gdb_note ("stop  0x%X);\n", stop);
+          ret = fetch_trace_frame_with_pc_in_range (&n_frame,
+                                                    (void *) start,
+                                                    (void *) stop,
+                                                    &curframe.format,
+                                                    &curframe.frame_data);
+        }
+      else if (msgcmp (&request, "outside:"))
+        {
+          if (!(hexToInt (&request, &start) &&
+                *request++ == ':'))
+            return "E11";       /* badly formed packet, field 1 */
+          else if (!hexToInt (&request, &stop))
+            return "E12";       /* badly formed packet, field 2 */
+          n_frame = curframe.valid ? curframe.frame_id + 1: 0;
+          gdb_note ("STUB: call fetch_trace_frame_outside (id %d, ", n_frame);
+          gdb_note ("start 0x%X, ",   start);
+          gdb_note ("stop  0x%X);\n", stop);
+          ret = fetch_trace_frame_with_pc_outside (&n_frame,
+                                                   (void *) start,
+                                                   (void *) stop,
+                                                   &curframe.format,
+                                                   &curframe.frame_data);
+        }
+      else /* simple TFind by frame number: */
+        {
+          if (!hexToInt (&request, &frameno))
+            return "E10";       /* badly formed packet */
+          if (frameno != (unsigned long) -1)
+            {
+              gdb_note ("STUB: call fetch_trace_frame (id %d);\n", frameno);
+              ret = fetch_trace_frame (n_frame = frameno,
+                                       &curframe.format,
+                                       &curframe.frame_data);
+#if 0
+	      printp("STUB: fetch_trace_frame: return %d\n", ret);
+#endif
+            }
+          else  /* discard any trace frame, debug "the real world" */
+            {
+              if (curframe.valid)
+                gdb_note ("STUB: discard current trace frame #%d.\n",
+                          curframe.frame_id);
+              curframe.valid = 0;
+              return "OK";
+            }
+        }
+      if (ret == OK_TARGET_RESPONSE)    /* fetch_trace_frame succeeded */
+        { /* setup for debugging the trace frame */
+          curframe.valid    = 1;
+          curframe.frame_id = n_frame;
+          curframe.tdp_id   = curframe.frame_data->id;
+
+          memset ((char *) &curframe.traceregs, 0,
+                  sizeof (curframe.traceregs));
+          curframe.traceregs[PC] = (unsigned long)
+            curframe.frame_data->program_counter;
+
+          if (curframe.format)
+            {
+              unsigned long regs_mask = curframe.format->regs_mask;
+              unsigned long *regs, *stack, *mem;
+              unsigned long regno, index = 0;
+              CFD *dummy;
+
+              if ((ret = get_addr_to_frame_regs_stack_mem
+                   (curframe.frame_data, &dummy, &regs, &stack, &mem))
+                  != OK_TARGET_RESPONSE)
+                {
+                  curframe.valid = 0;
+                  sprintp (retbuf, "E2%x", ret);
+                  return (char *)
+                    dtc_error_ret ((int) &retbuf,
+                                   "get_addr_to_frame_regs_stack_mem",
+                                   ret);
+                }
+
+              if (remote_debug > 1)
+                { /* echo what we've found to gdb console */
+                  sprintp (spare_buffer,
+                           "STUB: Found frame %d, TDP %d, format %d (%s):\n",
+                           curframe.frame_id,
+                           curframe.tdp_id & 0x7fffffff,
+                           curframe.format->id,
+                           curframe.tdp_id & 0x80000000 ?
+                           "trap frame" : "stepping frame");
+                  gdb_puts (spare_buffer);
+                }
+              /* copy trace frame regs into stub's data format */
+              for (regno = 0, index = 0;
+                   regno < 16;
+                   regno++, regs_mask >>= 1)
+                if (regs_mask & 1)      /* got a collected register */
+                  {
+                    curframe.traceregs[regno] = regs[index++];
+                    if (remote_debug > 1)
+                      {
+                        sprintp (spare_buffer,
+                                 "      Collected 0x%08x for register %d.\n",
+                                 curframe.traceregs[regno], regno);
+                        gdb_puts (spare_buffer);
+                      }
+                  }
+              if (remote_debug > 1)
+                {
+                  long           midx, ridx, len;
+                  MEMRANGE_DEF  *mrange;
+                  unsigned char *data, *base;
+
+                  if (curframe.format->stack_size > 0)
+                    {
+                      len = curframe.format->stack_size;
+                      sprintp (spare_buffer,
+                               "      Collected %d bytes of stack at 0x%x:\n",
+                               len, curframe.traceregs[A7]);
+                      gdb_puts (spare_buffer);
+
+                      /* print stack data, but stay under msg len */
+                      if (len >= (NUMREGBYTES/2 - 2))
+                        len =    (NUMREGBYTES/2 - 3);
+                      mem2hex ((unsigned char *) stack,
+                               spare_buffer, len, 0);
+                      spare_buffer [len * 2] = '\n';
+                      spare_buffer [len * 2 + 1] = '\0'; /* EOS */
+                      gdb_puts (spare_buffer);
+                    }
+		  else
+		    gdb_puts ("Stack not collected\n");
+
+                  for (midx = 0;
+                       get_addr_to_a_mem_range (curframe.frame_data,
+                                                midx,
+                                                &mrange,
+                                                (void **) &data)
+                       == OK_TARGET_RESPONSE;
+                       midx++)
+                    {
+                      if ((mrange->typecode == 0) ||
+                          (mrange->typecode == (unsigned long) -1))
+                        {
+                          sprintp (spare_buffer,
+                                   "      Collected %d bytes at MEM: 0x%x:\n",
+                                   mrange->size, mrange->offset);
+                          base = (unsigned char *) mrange->offset;
+                        }
+                      else
+                        {
+                          if ((ridx = elinum_to_index (mrange->typecode)) > 0)
+                            base = (unsigned char *) curframe.traceregs[ridx]
+                              + (long) mrange->offset;
+                          else
+                            {
+                              sprintp (spare_buffer,
+                   "STUB: bad typecode in memrange #%d: (0x%x,0x%x,0x%x).\n",
+                                       midx,
+                                       mrange->typecode,
+                                       mrange->offset,
+                                       mrange->size);
+                              gdb_puts (spare_buffer);
+                              continue;
+                            }
+                          sprintp (spare_buffer,
+                   "      Collected %d bytes at 0x%x (REG %X + %d):\n",
+                                   mrange->size,
+                                   base,
+                                   mrange->typecode,
+                                   mrange->offset);
+                        }
+                      gdb_puts (spare_buffer);
+                      len = mrange->size;
+                      if (len >= (NUMREGBYTES/2 - 2))
+                        len =    (NUMREGBYTES/2 - 3);
+                      mem2hex (data, spare_buffer, len, 0);
+                      spare_buffer [len * 2] = '\n';
+                      spare_buffer [len * 2 + 1] = '\0'; /* EOS */
+                      gdb_puts (spare_buffer);
+                    }
+                }
+            }
+          sprintp (retbuf, "F%xT%x", n_frame, curframe.tdp_id & 0x7fffffff);
+          return   retbuf;
+        }
+      else if (ret == NOT_FOUND_TARGET_RESPONSE)
+        {
+          /* Here's a question: if the fetch_trace_frame call failed
+             (which probably means a bad "TFIND" command from GDB),
+             should we remain focused on the previous frame (if any),
+             or should we revert to "no current frame"?
+           */
+          return "F-1";
+        }
+      else
+        {
+          sprintp (retbuf, "E2%x", ret);
+          return (char *) dtc_error_ret ((int) &retbuf,
+                                         "fetch_trace_frame[...]",
+                                         ret);
+        }
+    }
+  else                  /* unknown trace command */
+    {
+      return "";
+    }
+}
+
+/* Table used by the crc32 function to calcuate the checksum. */
+static unsigned long crc32_table[256];
+
+static int crc_mem_err;
+
+static unsigned long
+crc32 (buf, len, crc)
+     unsigned char *buf;
+     int len;
+     unsigned long crc;
+{
+  crc_mem_err = FALSE;
+
+  if (! crc32_table[1])
+    {
+      /* Initialize the CRC table and the decoding table. */
+      int i, j;
+      unsigned int c;
+
+      for (i = 0; i < 256; i++)
+	{
+	  for (c = i << 24, j = 8; j > 0; --j)
+	    c = c & 0x80000000 ? (c << 1) ^ 0x04c11db7 : (c << 1);
+	  crc32_table[i] = c;
+	}
+    }
+
+  while (len--)
+    {
+      if (read_access_violation (buf))
+	{
+	  crc_mem_err = TRUE;
+	  return -1;
+	}
+      crc = (crc << 8) ^ crc32_table[((crc >> 24) ^ *buf++) & 255];
+    }
+  return crc;
+}
+
+static char *
+crc_query (cmd)
+     char *cmd;
+{
+  unsigned long startmem, len, crc;
+  static char buf[32];
+
+  if (hexToInt (&cmd, &startmem) &&
+      *cmd++ == ','              &&
+      hexToInt (&cmd, &len))
+    {
+      crc = crc32  ((unsigned char *) startmem, len, 0xffffffff);
+      if (!crc_mem_err)
+	{
+	  sprintp (buf, "C%08x", crc);
+	  return buf;
+	}
+      /* else error, fall thru */
+    }
+  sprintp (buf, "E01");
+  return buf;
+}
+
+
+static char *
+handle_test (request)
+     char *request;
+{
+  ULONG args[7];
+  int i;
+
+  /* Parse the arguments, a comma-separated list of hex numbers, into
+     ARGS.  Parse at most six arguments.  */
+  i = 1;
+  if (*request != '\0')
+    while (i < 7)
+      {
+	if (! hexToInt (&request, &args[i++]))
+	  return "E01";
+	if (*request == '\0')
+	  break;
+	if (*request++ != ',')
+	  return "E01";
+      }
+
+  /* Fill the rest of the args array with zeros.  This is what the
+     INLINES command processor does with omitted arguments.  */
+  for (; i < 7; i++)
+    args[i] = 0;
+
+  gdb_c_test (args);
+
+  return "OK";
+}
+
+
+/* GDB_TRAP_1_HANDLER
+
+   By the time this is called, the registers have been saved in "registers",
+   and the interrupt priority has been set to permit serial UART interrupts.
+
+   However, since no gdb request has yet been received, and there is no
+   equivalent of getpacket for us to wait on, we can't sit here waiting
+   for packets and processing them.
+
+   In fact, the ONLY thing for us to do here is sit and wait.
+   As gdb sends packet requests, they will handle themselves at the
+   interrupt level.  When gdb decides we can continue, it will reset
+   the global variable "gdb_handling_trap1", and we will return
+   (whereupon registers will be restored etc.)   */
+
+void  gdb_trap_1_handler( void )
+{
+  gdb_handling_trap1 = TRUE;
+  sss_trace_flag = '\0';        /* shut off "trace bit" (indirectly) */
+  gdb_signo = 5;
+  putpacket( "S05" );
+  while ( gdb_handling_trap1 )
+    ;
+  return;
+}
+
+void  gdb_trace_handler( void )
+{
+  sss_trace_flag = '\0';        /* shut off "trace bit" (indirectly) */
+  gdb_handling_trap1 = TRUE;
+  gdb_handling_sstrace = TRUE;
+  gdb_signo = 5;
+  putpacket( "S05" );
+  while ( gdb_handling_trap1 )
+    ;
+  return;
+}
diff --git a/gdb/testsuite/gdb.trace/infotrace.exp b/gdb/testsuite/gdb.trace/infotrace.exp
new file mode 100644
index 0000000..16cf25e
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/infotrace.exp
@@ -0,0 +1,99 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+#
+# test "info tracepoints" command
+#
+
+gdb_delete_tracepoints
+set c_test_num [gdb_gettpnum gdb_c_test];
+set asm_test_num [gdb_gettpnum gdb_asm_test];
+if { $c_test_num <= 0 || $asm_test_num <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+# 2.1 info tracepoints (all)
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*$c_test_num\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_c_test.*$asm_test_num\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*gdb_asm_test.*" \
+    "2.1: info tracepoints (all)"
+
+# 2.2 info tracepoint (specific)
+gdb_test "info tracepoint $c_test_num" \
+    "$c_test_num\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*in gdb_c_test.*" \
+    "2.2a: info tracepoint $c_test_num (gdb_c_test)"
+
+gdb_test "info tracepoint $asm_test_num" \
+    "$asm_test_num\[\t \]+y\[\t \]+0x\[0-9a-fA-F\]+.*gdb_asm_test.*" \
+    "2.2b: info tracepoint $asm_test_num (gdb_asm_test)"
+
+# 2.3 info tracepoint (invalid tracepoint number)
+gdb_test "info tracepoint [expr $c_test_num + $asm_test_num]" \
+    "No tracepoint number [expr $c_test_num + $asm_test_num]." \
+    "2.3: info tracepoint (invalid tracepoint number)"
+
+# 2.4 info tracepoints (list of numbers)
+send_gdb "info tracepoints $c_test_num $asm_test_num \n"
+gdb_expect {
+    -re "Num Enb .*$gdb_prompt $" {
+	fail "2.4: info trace rejects multiple tracepoint numbers"
+    }
+    -re ".*$gdb_prompt $" {
+	pass "2.4: info trace rejects multiple tracepoint numbers"
+    }
+}
+
+# 2.5 help info trace
+gdb_test "help info tracepoints" \
+    "Status of tracepoints, or tracepoint number NUMBER.*" \
+    "2.5: help info tracepoints"
+
diff --git a/gdb/testsuite/gdb.trace/limits.c b/gdb/testsuite/gdb.trace/limits.c
new file mode 100644
index 0000000..d9c02e7
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/limits.c
@@ -0,0 +1,51 @@
+/*
+ * Test program for tracing internal limits (number of tracepoints etc.)
+ */
+
+int n = 6;
+
+int arr[64];
+
+static void foo(int x)
+{
+}
+
+static void bar(int y)
+{
+}
+
+static void baz(int z)
+{
+}
+
+static void begin ()	/* called before anything else */
+{
+}
+
+static void end ()	/* called after everything else */
+{
+}
+
+int
+main (argc, argv, envp)
+     int argc;
+     char *argv[], **envp;
+{
+  int i;
+
+#ifdef usestubs
+  set_debug_traps ();
+  breakpoint ();
+#endif
+
+  begin ();
+  for (i = 0; i < sizeof(arr) / sizeof(arr[0]); i++)
+    arr[i] = i + 1;
+
+  foo (1);
+  bar (2);
+  baz (3);
+  end ();
+  return 0;
+}
+
diff --git a/gdb/testsuite/gdb.trace/limits.exp b/gdb/testsuite/gdb.trace/limits.exp
new file mode 100644
index 0000000..00e15b2
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/limits.exp
@@ -0,0 +1,316 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+if [istarget "m68k-*-elf"] then {
+    pass "Test not supported on this target"
+    return;
+}
+
+load_lib "trace-support.exp"
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+set testfile "limits"
+set srcfile ${testfile}.c
+set binfile $objdir/$subdir/$testfile
+
+if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	executable {debug additional_flags=-w}] != "" } {
+    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+}
+
+# Tests:
+# 1) Meet and exceed artificial limit on number of tracepoints
+# 2) Meet and exceed artificial limit on number of memranges
+# 3) Meet and exceed artificial limit on bytes  of bytecode data
+# [NOTE: number four is moved out into its own separate test module.]
+# 4) Meet and exceed artificial limit on bytes  of trace buffer storage
+#    (circular and non-circular modes).  However note that a more 
+#    thorough test of the circular mode can be made separately.
+
+set cr "\[\r\n\]+"
+
+proc gdb_tracepoint_limit_test { } {
+    global gdb_prompt
+    global cr
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Set three tracepoints
+    gdb_test "trace foo" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "tracepoint limit test: set first tracepoint"
+
+    gdb_test "trace bar" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "tracepoint limit test: set second tracepoint"
+
+    gdb_test "trace baz" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "tracepoint limit test: set third tracepoint"
+
+    # Set secret artificial tracepoint limit to four
+    gdb_test "maint packet QTLimit:tp:4" \
+	    "received: .OK." \
+	    "tracepoint limit test: set limit to four"
+
+    # Now sending three tracepoints should succeed.
+    send_gdb "tstart\n"
+    gdb_expect {
+	-re "$cr$gdb_prompt" {
+	    pass "tracepoint limit test: send fewer than limit"
+	}
+	default {
+	    fail "tracepoint limit test: send fewer than limit"
+	}
+    }
+
+    # Set secret artificial tracepoint limit to three
+    gdb_test "maint packet QTLimit:tp:3" \
+	    "received: .OK." \
+	    "tracepoint limit test: set limit to three"
+
+    # Now sending three tracepoints should still succeed.
+    send_gdb "tstart\n"
+    gdb_expect {
+	-re "$cr$gdb_prompt" {
+	    pass "tracepoint limit test: send equal to limit"
+	}
+	default {
+	    fail "tracepoint limit test: send equal to limit"
+	}
+    }
+
+    # Set secret artificial tracepoint limit to two
+    gdb_test "maint packet QTLimit:tp:2" \
+	    "received: .OK." \
+	    "tracepoint limit test: set limit to two"
+
+    # Now sending three tracepoints should fail.
+    gdb_test "tstart" \
+	    ".*\[Ee\]rror.*" \
+	    "tracepoint limit test: send more than limit"
+
+    # Clean up:
+    gdb_test "tstop" "" ""
+    gdb_test "maint packet QTLimit:tp:FFFFFFFF" "" ""
+}
+
+proc gdb_memrange_limit_test { } {
+    global gdb_prompt
+    global cr
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Set three tracepoints, and make 'em collect memranges
+    gdb_test "trace foo" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "memrange limit test: set first tracepoint"
+
+    gdb_trace_setactions "memrange limit test: set first actions" \
+	    "" \
+	    "collect \$arg" "^$"
+
+    gdb_test "trace bar" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "memrange limit test: set second tracepoint"
+
+    gdb_trace_setactions "memrange limit test: set second actions" \
+	    "" \
+	    "collect \$arg" "^$"
+
+    gdb_test "trace baz" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "memrange limit test: set third tracepoint"
+
+    gdb_trace_setactions "memrange limit test: set third actions" \
+	    "" \
+	    "collect \$arg" "^$"
+
+    # Set secret artificial memrange limit to four
+    gdb_test "maint packet QTLimit:memrange:4" \
+	    "received: .OK." \
+	    "memrange limit test: set limit to four"
+
+    # Now sending three memranges should still succeed.
+    send_gdb "tstart\n"
+    gdb_expect {
+	-re "$cr$gdb_prompt" {
+	    pass "memrange limit test: send fewer than limit"
+	}
+	default {
+	    fail "memrange limit test: send fewer than limit"
+	}
+    }
+
+    # Set secret artificial memrange limit to three
+    gdb_test "maint packet QTLimit:memrange:3" \
+	    "received: .OK." \
+	    "memrange limit test: set limit to three"
+
+    # Now sending three memranges should still succeed.
+    send_gdb "tstart\n"
+    gdb_expect {
+	-re "$cr$gdb_prompt" {
+	    pass "memrange limit test: send equal to limit"
+	}
+	default {
+	    fail "memrange limit test: send equal to limit"
+	}
+    }
+
+    # Set secret artificial memrange limit to two
+    gdb_test "maint packet QTLimit:memrange:2" \
+	    "received: .OK." \
+	    "memrange limit test: set limit to two"
+
+    # Now sending three memranges should fail.
+    gdb_test "tstart" \
+	    ".*\[Ee\]rror.*" \
+	    "memrange limit test: send more than limit"
+
+    # Clean up:
+    gdb_test "tstop" "" ""
+    gdb_test "maint packet QTLimit:memrange:FFFFFFFF" "" ""
+}
+
+
+proc gdb_bytecode_limit_test { } {
+    global gdb_prompt
+    global cr
+
+    # Make sure we're in a sane starting state.
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    gdb_delete_tracepoints
+
+    # Set three tracepoints
+    gdb_test "trace foo" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "bytecode limit test: set first tracepoint"
+
+    gdb_trace_setactions "bytecode limit test: set first actions" \
+	    "" \
+	    "collect x + n" "^$"
+
+    gdb_test "trace bar" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "bytecode limit test: set second tracepoint"
+
+    gdb_trace_setactions "bytecode limit test: set second actions" \
+	    "" \
+	    "collect y + n" "^$"
+
+    gdb_test "trace baz" \
+	    "Tracepoint \[0-9\]+ at .*" \
+	    "bytecode limit test: set third tracepoint"
+
+    gdb_trace_setactions "bytecode limit test: set third actions" \
+	    "" \
+	    "collect z + n" "^$"
+
+    # Set secret artificial bytecode limit to a large number
+    gdb_test "maint packet QTLimit:bytecode:400" \
+	    "received: .OK." \
+	    "bytecode limit test: set limit to large"
+
+    # Now sending three bytecodes should still succeed.
+    send_gdb "tstart\n"
+    gdb_expect {
+	-re "$cr$gdb_prompt" {
+	    pass "bytecode limit test: send fewer than limit"
+	}
+	default {
+	    fail "bytecode limit test: send fewer than limit"
+	}
+    }
+
+    # Set secret artificial bytecode limit to a small number
+    gdb_test "maint packet QTLimit:bytecode:40" \
+	    "received: .OK." \
+	    "bytecode limit test: set limit to small"
+
+    # Now sending three bytecodes should fail.
+    gdb_test "tstart" \
+	    ".*\[Ee\]rror.*" \
+	    "bytecode limit test: send more than limit"
+
+
+    # Clean up:
+    gdb_test "tstop" "" ""
+    gdb_test "maint packet QTLimit:bytecode:FFFFFFFF" "" ""
+}
+
+proc gdb_trace_limits_tests { } {
+    global gdb_prompt
+
+    # We generously give ourselves one "pass" if we successfully 
+    # detect that this test cannot be run on this target!
+
+    if { ![gdb_target_supports_trace] } then { 
+	pass "Current target does not supporst trace"
+	return 1;
+    }
+
+    if [gdb_test "maint packet QTLimit:tp:ffffffff" \
+	    "received: .OK." ""] then { 
+	pass "This test cannot be run on this target"
+	return 1;
+    }
+
+    if [gdb_test "maint packet QTLimit:memrange:ffffffff" \
+	    "received: .OK." ""] then { 
+	pass "This test cannot be run on this target"
+	return 1;
+    }
+
+    if [gdb_test "maint packet QTLimit:bytecode:ffffffff" \
+	    "received: .OK." ""] then { 
+	pass "This test cannot be run on this target"
+	return;
+    }
+
+    gdb_tracepoint_limit_test
+    gdb_memrange_limit_test
+    gdb_bytecode_limit_test
+}
+
+# Start with a fresh gdb.
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load $binfile
+ 
+if [target_info exists gdb_stub] {
+    gdb_step_for_stub;
+}
+# Body of test encased in a proc so we can return prematurely.
+gdb_trace_limits_tests
diff --git a/gdb/testsuite/gdb.trace/packetlen.exp b/gdb/testsuite/gdb.trace/packetlen.exp
new file mode 100644
index 0000000..fd53e45
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/packetlen.exp
@@ -0,0 +1,100 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp"
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp"
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor "$binfile"
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none"  "" ""
+    send_gdb "compare-sections CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+#
+# Test collecting a whole bunch of stuff at a single tracepoint.
+# The test is whether this crashes GDB.
+#
+
+gdb_delete_tracepoints
+gdb_test "trace gdb_c_test" "" ""
+gdb_trace_setactions "setup collect actions" \
+	"" \
+	"collect parm\[0\], parm\[1\], parm\[2\], parm\[3\]" "^$" \
+	"collect parm\[4\], parm\[5\], parm\[6\], parm\[7\]" "^$" \
+	"collect p, local_reg, local_static, local_static_sizeof" "^$" \
+	"collect local_long, stack_ptr, end_of_stack" "^$" \
+	"collect gdb_char_test, gdb_short_test, gdb_long_test" "^$" \
+	"collect gdb_arr_test, gdb_struct1_test, gdb_struct2_test" "^$" \
+	"collect gdb_structp_test, gdb_structpp_test, gdb_union1_test" "^$" \
+	"end" ""
+
+gdb_test "tstart" "" "survive the long packet send"
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,1,2,3,4,5,6"
+    sleep 5
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+}
+
+gdb_test "tstop" "" "confirm: survived the long packet send"
+
diff --git a/gdb/testsuite/gdb.trace/passc-dyn.exp b/gdb/testsuite/gdb.trace/passc-dyn.exp
new file mode 100644
index 0000000..930a2ec
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/passc-dyn.exp
@@ -0,0 +1,181 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp";
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor $binfile
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    send_gdb "compare-sections CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We generously give ourselves one "pass" if we successfully 
+# detect that this test cannot be run on this target!
+if { ![gdb_target_supports_trace] } then {
+    pass "Current target does not supporst trace"
+    return 1;
+
+}
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+
+#
+# test passcount dynamically (live target)
+#
+
+set baseline [gdb_find_recursion_test_baseline $srcfile];
+
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+
+set testline2  [expr $baseline +  4]
+set testline3  [expr $baseline +  5]
+set testline4  [expr $baseline +  6]
+
+#
+# test passcount command semantics (live test)
+#
+
+## Set three tracepoints with three different passcounts.
+## Verify that the experiment stops after the one with the 
+## lowest passcount is hit.
+
+gdb_delete_tracepoints
+set tdp2 [gdb_gettpnum "$testline2"]
+set tdp3 [gdb_gettpnum "$testline3"]
+set tdp4 [gdb_gettpnum "$testline4"]
+if { $tdp2 <= 0 || $tdp3 <= 0 || $tdp4 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+gdb_test "passcount 4 $tdp2" "Setting tracepoint $tdp2's passcount to 4" \
+	"4.5: set passcount for tracepoint $tdp2"
+gdb_test "passcount 2 $tdp3" "Setting tracepoint $tdp3's passcount to 2" \
+	"4.5: set passcount for tracepoint $tdp3"
+gdb_test "passcount 3 $tdp4" "Setting tracepoint $tdp4's passcount to 3" \
+	"4.5: set passcount for tracepoint $tdp4"
+
+gdb_test "tstart" "" ""
+
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,1,2,3,4,5,6"
+    sleep 5
+    gdb_emclaptop_command "85,7,8,9,A,B,C"
+    sleep 5
+    gdb_emclaptop_command "85,D,E,F,10,11,12"
+    sleep 5
+    # gdb_test "tstop"
+    ##
+    ## Note! Must NOT give the tstop command, because the passcount
+    ##       has already stopped the experiment.  You would not
+    ##       think this would be an error, but in EMC's mind it is...
+    ##
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+    gdb_test "tstop" "" ""
+}
+
+gdb_test "tfind none" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x -1 x" ""] {
+    gdb_suppress_entire_file "0: tfind none failed"
+}
+
+gdb_test "tfind tracepoint $tdp2" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 0 x" ""] {
+    gdb_suppress_entire_file "1: first tfind failed"
+}
+
+gdb_test "tfind tracepoint $tdp3" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 1 x" ""] {
+    gdb_suppress_entire_file "2: second tfind failed"
+}
+
+gdb_test "tfind tracepoint $tdp4" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 2 x" ""] {
+    gdb_suppress_entire_file "3: third tfind failed"
+}
+
+gdb_test "tfind tracepoint $tdp2" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 3 x" ""] {
+    gdb_suppress_entire_file "4: fourth tfind failed"
+}
+
+gdb_test "tfind tracepoint $tdp3" "" ""
+if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 4 x" ""] {
+    gdb_suppress_entire_file "5: fifth tfind failed"
+}
+
+## We should now be at the last frame, because this frame's passcount
+## should have caused collection to stop.  If we do a tfind now, 
+## it should fail.
+
+gdb_test "tfind" "failed to find.*" "4.5: dynamic passcount test"
+
+# Finished!
+gdb_test "tfind none" "" ""
+
diff --git a/gdb/testsuite/gdb.trace/passcount.exp b/gdb/testsuite/gdb.trace/passcount.exp
new file mode 100644
index 0000000..eae6ddf
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/passcount.exp
@@ -0,0 +1,178 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+set baseline  [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+set testline1  [expr $baseline + 3]
+
+#
+# test "passcount" command
+#
+
+gdb_delete_tracepoints
+set trcpt1 [gdb_gettpnum gdb_c_test];
+set trcpt2 [gdb_gettpnum gdb_asm_test];
+set trcpt3 [gdb_gettpnum $testline1];
+if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+# 4.1 passcount of specified tracepoint
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+			"4.1a: set three tracepoints, passcounts all zero"
+
+gdb_test "passcount 2 $trcpt1" \
+	"Setting tracepoint $trcpt1.s passcount to 2" \
+	"4.1b: set 1st tracepoint's passcount to two"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+	"4.1c: verify 1st tracepoint's passcount set to two"
+
+gdb_test "passcount 4 $trcpt2" \
+	"Setting tracepoint $trcpt2.s passcount to 4" \
+	"4.1d: set 2nd tracepoint's passcount to four"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \
+	"4.1c: verify 2nd tracepoint's passcount set to four"
+
+# 4.2 passcount of last (default) tracepoint
+
+gdb_test "passcount 6" \
+	"Setting tracepoint $trcpt3.s passcount to 6" \
+	"4.2b: set last (default) tp's passcount to six"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+6\[\t \]+.*in gdb_recursion_test.*" \
+	"4.2b: verify last (default) tp's passcount set to six"
+
+# 4.3 run until stopped explicitly by user
+#     [deferred to dynamic test section]
+
+# 4.4 reset the previously set passcounts to new values
+
+gdb_test "passcount 7" \
+	"Setting tracepoint $trcpt3.s passcount to 7" \
+	"4.4a: reset last (default) tp's passcount to seven"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
+	"4.4a: verify reset last (default) tp's passcount to seven"
+
+gdb_test "passcount 5 $trcpt2" \
+	"Setting tracepoint $trcpt2.s passcount to 5" \
+	"4.4b: reset second tracepoint's passcount to five"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+5\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \
+	"4.4c: verify reset second tracepoint's passcount to five"
+
+# 4.20 <FIXME test number> passcount for "all"
+
+gdb_test "passcount 3 all" \
+	".*$trcpt1.s pass.* 3.*$trcpt2.s pass.* 3.*$trcpt3.s pass.* 3" \
+	"4.20a: set all three passcounts to three"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_recursion_test.*" \
+	"4.20a: set all three passcounts to three"
+
+gdb_test "passcount 4 all" \
+	".*$trcpt1.s pass.* 4.*$trcpt2.s pass.* 4.*$trcpt3.s pass.* 4" \
+	"4.20a: reset all three passcounts to four"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+	"4.20b: reset all three passcounts to four"
+
+# 4.5 Verify trace stops on first "satisfied" passcount
+#     [deferred to dynamic test section]
+
+# 4.6 minimum passcount boundary condition
+
+gdb_test "passcount 0 $trcpt1" \
+	"Setting tracepoint $trcpt1.s passcount to 0" \
+	"4.6: set passcount to zero"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+	"4.6: set passcount to zero"
+
+# 4.7 (test a very large passcount)
+
+gdb_test "passcount 32767 $trcpt1" \
+	"Setting tracepoint $trcpt1.s passcount to 32767" \
+	"4.7: set passcount to large number (32767)"
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+32767\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \
+	"4.7: set passcount to large number (32767)"
+
+# 4.8 set passcount for invalid tracepoint
+
+gdb_test "passcount 1 [expr $trcpt2 + $trcpt3]" \
+	"No tracepoint number [expr $trcpt2 + $trcpt3]." \
+	"4.8: invalid tracepoint number in passcount"
+
+# 4.9 help passcount
+gdb_test "help passcount" "Set the passcount for a tracepoint.*" \
+	"4.9: help passcount"
+
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
new file mode 100644
index 0000000..0f133ad
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -0,0 +1,421 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp";
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor $binfile
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none"  "" ""
+    send_gdb "compare-sections CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	     executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We generously give ourselves one "pass" if we successfully 
+# detect that this test cannot be run on this target!
+if { ![gdb_target_supports_trace] } then {
+    pass "Current target does not supporst trace"
+    return 1;
+
+}
+
+set cr "\[\r\n\]+"
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+#
+# test general reporting of trace experiment results
+#
+
+set testline1 0
+set testline2 0
+set testline3 0
+set testline4 0
+set testline5 0
+set testline6 0
+
+set arg1 1
+set arg2 2
+set arg3 3
+set arg4 4
+set arg5 5
+set arg6 6
+
+set gdb_recursion_test_baseline [gdb_find_recursion_test_baseline $srcfile];
+if { $gdb_recursion_test_baseline == -1 } {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+send_gdb "list $gdb_recursion_test_baseline, +12\n"
+gdb_expect {
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 1 " {
+	set testline1 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 2 " {
+	set testline2 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 3 " {
+	set testline3 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 4 " {
+	set testline4 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 5 " {
+	set testline5 $expect_out(1,string)
+	exp_continue
+    }
+    -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 6 " {
+	set testline6 $expect_out(1,string)
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($testline1 == 0) || ($testline2 == 0) || ($testline3 == 0) || ($testline4 == 0) || ($testline5 == 0) || ($testline6 == 0) } {
+	    gdb_suppress_entire_file "failed to locate test source lines:
+all tests in this module will fail."
+	}
+    }
+    default {
+	    gdb_suppress_entire_file "failed to locate test source lines (def):
+all tests in this module will fail."
+    } 
+}
+
+#
+# Setup trace experiment.  This will involve:
+#   1) a tracepoint where nothing is collected
+#   2) a tracepoint where only regs are collected
+#   3) a tracepoint where only args are collected
+#   4) a tracepoint where only locals are collected
+#   5) a tracepoint where some amount of stack memory is collected.
+#   6) a tracepoint where some expressions are collected.
+#
+
+gdb_delete_tracepoints
+set tdp1 [gdb_gettpnum $testline1]
+set tdp2 [gdb_gettpnum $testline2]
+set tdp3 [gdb_gettpnum $testline3]
+set tdp4 [gdb_gettpnum $testline4]
+set tdp5 [gdb_gettpnum $testline5]
+set tdp6 [gdb_gettpnum $testline6]
+
+if {    $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \
+	$tdp4 <= 0 || $tdp5 <= 0 || $tdp6 <= 0 } then {
+    fail "setting tracepoints failed"
+    return;
+}
+
+gdb_trace_setactions "9.x: setup TP to collect regs" \
+	"$tdp2" \
+	"collect \$regs" "^$"
+
+
+gdb_trace_setactions "9.x: setup TP to collect args" \
+	"$tdp3" \
+	"collect \$args" "^$"
+
+gdb_trace_setactions "9.x: setup TP to collect locals" \
+	"$tdp4" \
+	"collect \$locs" "^$"
+
+gdb_trace_setactions "9.x: setup TP to collect stack memory" \
+	"$tdp5" \
+	"collect \$fp, \*\(void \*\*\) \$sp @ 64" "^$"
+
+gdb_trace_setactions "9.x: setup TP to collect expressions" \
+	"$tdp6" \
+	"collect gdb_char_test, gdb_short_test, gdb_long_test" "^$"
+
+gdb_test "tstart" "" ""
+
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,$arg1,$arg2,$arg3,$arg4,$arg5,$arg6"
+    sleep 5
+    
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+}
+
+gdb_test "tstop" "" ""
+
+#
+# 9.1 test the tdump command
+#
+
+set timeout 60
+
+gdb_tfind_test "9.1: init: make sure not debugging any trace frame" "none" "-1"
+
+gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
+	"\$tracepoint" "$tdp1"
+
+# Nothing was collected at tdp1, so this tdump should be empty.
+gdb_test "tdump" \
+	"Data collected at tracepoint $tdp1, trace frame $decimal:" \
+	"9.1: tdump, nothing collected"
+
+gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
+	"\$tracepoint" "$tdp2"
+
+# regs were collected at tdp2.
+# How to match for the output of "info registers" on an unknown architecture?
+# For now, assume that every architecture has a register called "pc".
+gdb_test "tdump" \
+	"\[\r\n\]pc .*" \
+	"9.1: tdump, regs collected"
+
+gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
+	"\$tracepoint" "$tdp3"
+
+# args were collected at tdp3
+gdb_test "tdump" \
+	"depth = 3.*q1 = 2.*q2 = 2.*q3 = 3.*q4 = 4.*q5 = 5.*q6 = 6" \
+	"9.1: tdump, args collected"
+
+gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
+	"\$tracepoint" "$tdp4"
+
+# locals were collected at tdp4
+gdb_test "tdump" \
+	"q = 1" \
+	"9.1: tdump, locals collected"
+
+gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
+	"\$tracepoint" "$tdp5"
+
+# stack was collected at tdp5, plus the frame pointer
+gdb_test "tdump" \
+	".fp = .*sp @ 64 = .*" \
+	"9.1: tdump, memrange collected"
+
+gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
+	"\$tracepoint" "$tdp6"
+
+# globals were collected at tdp6
+gdb_test "tdump" \
+	"gdb_char_test = 1.*gdb_short_test = 2.*gdb_long_test = 3" \
+	"9.1: tdump, global variables collected"
+
+# 9.2 test tdump with arguments
+#     [no go, tdump doesn't have any arguments]
+
+# 9.3 help tdump
+
+gdb_test "help tdump" "Print everything collected at the current.*" \
+	"9.3: help tdump"
+
+set linecount1 0
+set linecount2 0
+set linecount3 0
+set linecount4 0
+set linecount5 0
+set linecount6 0
+
+gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
+
+#
+# 11.x test built-in trace variables $trace_frame, $trace_line etc.
+#
+
+gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
+	"11.1: test \$trace_frame"
+
+gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
+	"11.2: test \$tracepoint"
+
+gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
+	"11.3: test \$trace_line"
+
+send_gdb "print \$trace_file\n"
+gdb_expect {
+    -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
+	pass "11.4: test \$trace_file"
+    }
+    -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
+	pass "11.4: test \$trace_file"
+    }
+    -re "$gdb_prompt $" {
+	fail "11.4: test \$trace_file"
+    }
+    timeout {
+	fail "11.4: test \$trace_file (timeout)"
+    }
+}
+
+#gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
+#	"11.4: test \$trace_file"
+
+#
+# 12.x test report generation using arbitrary GDB commands, loops etc.
+#
+
+send_gdb "while \$trace_frame != -1\n  output \$trace_file\n  printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n  tfind\n  end\n"
+gdb_expect {
+    -re " line $testline1 .tracepoint .$tdp1" {
+	set linecount1 [expr $linecount1 + 1]
+	exp_continue
+    }
+    -re " line $testline2 .tracepoint .$tdp2" {
+	set linecount2 [expr $linecount2 + 1]
+	exp_continue
+    }
+    -re " line $testline3 .tracepoint .$tdp3" {
+	set linecount3 [expr $linecount3 + 1]
+	exp_continue
+    }
+    -re " line $testline4 .tracepoint .$tdp4" {
+	set linecount4 [expr $linecount4 + 1]
+	exp_continue
+    }
+    -re " line $testline5 .tracepoint .$tdp5" {
+	set linecount5 [expr $linecount5 + 1]
+	exp_continue
+    }
+    -re " line $testline6 .tracepoint .$tdp6" {
+	set linecount6 [expr $linecount6 + 1]
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
+	    fail "12.1: trace report #1"
+	} else {
+	    pass "12.1: trace report #1"
+	}
+    }
+    timeout {
+	fail "12.1: trace report #1 (timeout)"
+    }
+}
+
+gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
+	"\$tracepoint" "$tdp2"
+
+set linecount2 0
+
+send_gdb "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end\n"
+gdb_expect {
+    -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
+	set linecount2 [expr $linecount2 + 1]
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($linecount2 < 4) } {
+	    fail "12.2: trace report #2"
+	} else {
+	    pass "12.2: trace report #2"
+	}
+    }
+    timeout {
+	fail "12.2: trace report #2 (timeout)"
+    }
+}
+
+gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
+	"\$tracepoint" "$tdp3"
+
+set linecount3 0
+
+send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end\n"
+gdb_expect {
+    -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
+	set linecount3 [expr $linecount3 + 1]
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($linecount3 < 4) } {
+	    fail "12.3: trace report #3"
+	} else {
+	    pass "12.3: trace report #3"
+	}
+    }
+    timeout {
+	fail "12.3: trace report #3 (timeout)"
+    }
+}
+
+gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
+	"\$tracepoint" "$tdp6"
+
+set linecount6 0
+
+send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end\n"
+gdb_expect {
+    -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
+	set linecount6 [expr $linecount6 + 1]
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { ($linecount6 < 4) } {
+	    fail "12.4: trace report #4"
+	} else {
+	    pass "12.4: trace report #4"
+	}
+    }
+    timeout {
+	fail "12.4: trace report #4 (timeout)"
+    }
+}
+
+# Finished!
+gdb_tfind_test "finished: make sure not debugging any trace frame" "none" "-1"
diff --git a/gdb/testsuite/gdb.trace/save-trace.exp b/gdb/testsuite/gdb.trace/save-trace.exp
new file mode 100644
index 0000000..3ff9890
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/save-trace.exp
@@ -0,0 +1,171 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+set baseline  [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+set testline1 [expr $baseline + 4]
+set testline2 [expr $baseline + 5]
+set testline3 [expr $baseline + 6]
+set testline4 [expr $baseline + 7]
+set testline5 [expr $baseline + 8]
+set testline6 [expr $baseline + 9]
+
+#
+# test save-trace command
+#
+
+# setup a set of tracepoints to save
+
+gdb_delete_tracepoints
+
+foreach x { 1 2 3 4 5 6 } {
+    set testline [expr \$testline$x];
+    set trcpt [gdb_gettpnum $testline];
+    set trcpt$x $trcpt;
+    gdb_test "passcount $x" \
+	     "Setting tracepoint $trcpt.* to $x" \
+	     "10.x: set passcount for tracepoint $trcpt"
+
+    gdb_trace_setactions "10.x: set actions for tracepoint $x" \
+	    "" \
+	    "collect q$x" "^$" \
+	    "while-stepping $x" "^$" \
+	    "collect q$x" "^$" \
+	    "end" "^$"
+}
+
+
+proc gdb_verify_tracepoints { testname } {
+    global gdb_prompt;
+
+    set ws "\[\t \]+"
+    set nl "\[\r\n\]+"
+    set ourstate 1;
+    set result "pass";
+    send_gdb "info tracepoints\n";
+    gdb_expect 10 {
+	-re "y\[\t \]+0x\[0-9a-fA-F\]+\[\t \]+(\[0-9\]+)\[\t \]+(\[0-9\]+)\[\t \]+in gdb_recursion_test\[^\r\n\]+" {
+	    if { $expect_out(1,string) != $expect_out(2,string) } {
+		#set result "fail";
+	    }
+	    if { $expect_out(1,string) != $ourstate } {
+		set result "fail";
+	    }
+	    incr ourstate;
+	    exp_continue;
+	}
+	-re "$gdb_prompt $" {
+	    if { $ourstate >= 6 } {
+		set result "pass";
+	    } else {
+		set result "fail";
+	    }
+	}
+	default {
+	    set result "fail";
+	}
+    }
+    $result $testname;
+    return $result;
+}
+
+gdb_verify_tracepoints "10.x: verify trace setup";
+
+# 10.1 Save current tracepoint definitions to a file
+
+remote_file host delete savetrace.tr
+gdb_test "save-tracepoints savetrace.tr" \
+	"Tracepoints saved to file 'savetrace.tr'." \
+	"10.1: save tracepoint definitions"
+
+# 10.2 Read back tracepoint definitions
+
+gdb_delete_tracepoints
+gdb_test "info tracepoints" "No tracepoints." "10.2: delete tracepoints"
+gdb_test "source savetrace.tr" \
+	"Tracepoint \[0-9\]+ at .*" \
+	"10.2: read back saved tracepoints"
+gdb_verify_tracepoints "10.2: verify recovered tracepoints";
+remote_file host delete savetrace.tr
+
+# 10.3 repeat with a path to the file
+
+remote_file host delete $objdir/savetrace.tr
+gdb_test "save-tracepoints $objdir/savetrace.tr" \
+	"Tracepoints saved to file '$objdir/savetrace.tr'." \
+	"10.3: save tracepoint definitions, full path"
+
+gdb_delete_tracepoints
+gdb_test "info tracepoints" "No tracepoints." "10.3: delete tracepoints"
+gdb_test "source $objdir/savetrace.tr" \
+	"Tracepoint \[0-9\]+ at .*" \
+	"10.4: read saved tracepoints, full path"
+gdb_verify_tracepoints "10.3: verify recovered tracepoints, full path";
+remote_file host delete $objdir/savetrace.tr
+
+# 10.5 invalid filename
+#      [deferred -- not sure what a good invalid filename would be]
+
+# 10.6 save-trace (file already exists)
+#      [expect it to clobber the old one]
+
+# 10.7 help save-tracepoints
+
+gdb_test "help save-tracepoints" \
+	"Save current tracepoint definitions as a script.*" \
+	"10.7: help save-tracepoints"
diff --git a/gdb/testsuite/gdb.trace/tfind.exp b/gdb/testsuite/gdb.trace/tfind.exp
new file mode 100644
index 0000000..f101851
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/tfind.exp
@@ -0,0 +1,405 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp";
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor $binfile
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none" "" ""
+    send_gdb "compare-sections CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" "$binfile -O1" \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We generously give ourselves one "pass" if we successfully 
+# detect that this test cannot be run on this target!
+if { ![gdb_target_supports_trace] } then {
+    pass "Current target does not supporst trace"
+    return 1;
+
+}
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+set baseline  [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+set testline1 [expr $baseline + 1]
+set testline2 [expr $baseline + 5]
+set testline3 [expr $baseline + 6]
+set testline4 [expr $baseline + 7]
+set testline5 [expr $baseline + 8]
+
+#
+# test tfind command
+#
+
+gdb_delete_tracepoints
+set tdp1 [gdb_gettpnum "\*gdb_recursion_test"]
+set tdp2 [gdb_gettpnum $testline2]
+set tdp3 [gdb_gettpnum $testline3]
+set tdp4 [gdb_gettpnum $testline4]
+set tdp5 [gdb_gettpnum $testline5]
+if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \
+     $tdp4 <= 0 || $tdp5 <= 0 } then {
+    fail "setting tracepoints"
+    return;
+}
+
+# 6.1 test tstart command
+send_gdb "tstart\n"
+gdb_expect {
+    -re "Trace can only be run on remote targets.*$gdb_prompt $" {
+	fail "6.1: tstart (not connected to remote?)"
+	return;
+    }
+    -re "Target does not support this command.*$gdb_prompt $" {
+	fail "6.1: tstart (connected to wrong target?)"
+	return;
+    }
+    -re "Target returns error code.*$gdb_prompt $" {
+	fail "6.1: tstart (connected to wrong target?)"
+	return;
+    }
+    -re "$gdb_prompt $" {
+	pass "6.1: tstart"
+    }
+    default {
+	fail "6.1: tstart (default)"
+	return;
+    }
+}
+
+# test tstatus (when trace on)
+gdb_test "tstatus" "\[Tt\]race is running.*" "test tstatus on"
+
+# 6.2 test help tstart
+gdb_test "help tstart" "Start trace data collection." "6.2: help tstart"
+
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,1,2,3,4,5,6"
+    sleep 5
+    
+    gdb_emclaptop_command "85,7,8,9,A,B,C"
+    sleep 5
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+}
+
+# 7.1 test tstop command
+send_gdb "tstop\n"
+gdb_expect {
+    -re "Trace can only be run on remote targets.*$gdb_prompt $" {
+	fail "7.1: tstop (not connected to remote?)"
+	return;
+    }
+    -re "Target does not support this command.*$gdb_prompt $" {
+	fail "7.1: tstop (connected to wrong target?)"
+	return;
+    }
+    -re "Target returns error code.*$gdb_prompt $" {
+	fail "7.1: tstop (connected to wrong target?)"
+	return;
+    }
+    -re "$gdb_prompt $" {
+	pass "7.1: tstop"
+    }
+    default {
+	fail "7.1: tstop (default)"
+	return;
+    }
+}
+
+# 7.2 test help tstop
+gdb_test "help tstop" "Stop trace data collection." "7.2: help tstop"
+
+# test tstatus (when trace off)
+gdb_test "tstatus" "\[Tt\]race.* not running.*" "test tstatus off"
+
+## record starting PC
+set save_pc [gdb_readexpr "(unsigned long) \$pc"];
+if { $save_pc == -1 } then {
+    fail "could not read PC"
+    return;
+}
+
+# 8.7  tfind start
+## check $trace_frame == 0
+gdb_tfind_test "8.7: tfind start command" "start" "0";
+## check $pc != startPC
+gdb_test "printf \"x \%d x\\n\", \$pc != $save_pc" \
+	"x 1 x" \
+	"8.7b: tfind start"
+
+# 8.8  tfind none
+## check $trace_frame == -1
+gdb_tfind_test "8.8: tfind none" "none" "-1";
+## check $pc == startPC
+gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
+	"x 1 x" \
+	"8.8b: tfind none (restores non-trace PC)"
+
+# 8.9  tfind end
+## check $trace_frame == -1
+gdb_tfind_test "8.9: tfind end, selects no frame" "end" "-1";
+## check $pc == startPC
+gdb_test "printf \"x \%d x\\n\", \$pc == $save_pc" \
+	"x 1 x" \
+	"8.9b: tfind end (restores non-tracing PC)"
+
+# 8.1  tfind n
+## check $trace_frame == n
+gdb_tfind_test "8.1: tfind 1" "1" "1"
+## check $trace_line corresponds to tracepoint for frame n
+gdb_test "print \$trace_line" "$testline2" "8.1b: tfind 1 (correct line)"
+
+# 8.28 tfind invalid n (big number)
+## check "not found" error
+## check $trace_frame != n
+gdb_test "tfind 32767" \
+	"failed to find.*" \
+	"8.28: tfind <n> command rejects invalid frame number"
+
+gdb_test "printf \"x \%d x\\n\", \$trace_frame == 32767" \
+	"x 0 x" \
+	"8.28: tfind <n> rejected bad input (32767)"
+
+# 8.31 tfind negative n
+## check error
+gdb_test "tfind -3" "invalid input.*" "8.31: tfind <n> rejects negative input"
+## check $trace_frame != -n
+gdb_test "printf \"x \%d x\\n\", \$trace_frame == -3" "x 0 x" \
+	"8.31: tfind <n> rejected negative input (-3)"
+
+# 8.10 tfind <no arg>
+## check $trace_frame += 1
+
+gdb_tfind_test "8.10: tfind start" "start" "0";
+gdb_test "print \$trace_line" "$baseline"  \
+	"8.10: tfind 0 (correct line $baseline)"
+gdb_tfind_test "8.10: tfind noargument 1" "" "1";
+gdb_test "print \$trace_line" "$testline2" \
+	"8.10: tfind 1 (correct line $testline2)"
+gdb_tfind_test "8.10: tfind noargument 2" "" "2";
+gdb_test "print \$trace_line" "$testline3" \
+	"8.10: tfind 2 (correct line $testline3)"
+gdb_tfind_test "8.10: tfind noargument 3" "" "3";
+gdb_test "print \$trace_line" "$testline4" \
+	"8.10: tfind 3 (correct line $testline4)"
+
+gdb_tfind_test "8.11: tfind 3" "3" "3";
+gdb_test "print \$trace_line" "$testline4" \
+	"8.11: tfind 3 (correct line $testline4)"
+gdb_tfind_test "8.11: tfind backward 2" "-" "2";
+gdb_test "print \$trace_line" "$testline3" \
+	"8.11: tfind 2 (correct line $testline3)"
+gdb_tfind_test "8.11: tfind backward 1" "-" "1";
+gdb_test "print \$trace_line" "$testline2" \
+	"8.11: tfind 1 (correct line $testline2)"
+gdb_tfind_test "8.11: tfind backward 0" "-" "0";
+gdb_test "print \$trace_line" "$baseline"  \
+	"8.11: tfind 0 (correct line $baseline)"
+
+gdb_tfind_test "8.12: tfind none" "none" "-1";
+gdb_tfind_test "8.12: tfind tracepoint <n>" "tracepoint $tdp2" \
+	"\$tracepoint" "$tdp2";
+gdb_test "print \$trace_line" "$testline2" \
+	"8.12: tfind tracepoint <n> (line $testline2)"
+
+gdb_tfind_test "8.25: tfind none" "none" "-1";
+gdb_test "tfind tracepoint 0" "failed to find.*" \
+	"8.25: tfind tracepoint rejects zero"
+gdb_test "tfind tracepoint 32767" "failed to find.*" \
+	"8.25: tfind tracepoint rejects nonexistant tracepoint (32767)"
+gdb_test "tfind tracepoint -1" "failed to find.*" \
+	"8.25: tfind tracepoint rejects nonexistant tracepoint (-1)"
+
+# 8.37 tfind tracepoint n where n no longer exists (but used to)
+gdb_test "delete trace $tdp2" "" ""
+gdb_tfind_test "8.37: tfind none" "none" "-1";
+gdb_tfind_test "8.37: tfind deleted tracepoint" \
+	"tracepoint $tdp2" \
+	"\$tracepoint" "$tdp2";
+gdb_test "print \$trace_line" "$testline2" \
+	"8.37: tfind deleted tracepoint (line $testline2)"
+
+# 8.13 tfind tracepoint <no arg>
+## check $tracepoint same before and after, $trace_frame changed
+
+gdb_tfind_test "8.13: tfind none" "none" "-1";
+gdb_tfind_test "8.13: tracepoint $tdp1" "tracepoint $tdp1" \
+	"\$tracepoint" "$tdp1";
+gdb_test "print \$trace_line" "$baseline" \
+	"8.13: tfind tracepoint $tdp1 (line $baseline)"
+gdb_test "set \$save_frame = \$trace_frame" "" ""
+gdb_tfind_test "8.13: tracepoint <no arg>" "tracepoint" \
+	"\$tracepoint" "$tdp1";
+gdb_test "printf \"x \%d x\\n\", \$trace_frame == \$save_frame" \
+	"x 0 x" \
+	"8.13: tracepoint <no arg>, tracepoint number unchanged"]
+
+# 1.12 set tracepoint in prologue
+#
+# tdp1 was set at *gdb_recursion_test (ie. the hard address of the
+# function, before the prologue).  Test to see that it succeeded.
+# Current pc should be equal to the address of the function.
+
+gdb_test "printf \"x \%d x\\n\", \$pc == gdb_recursion_test" \
+	"x 1 x" \
+	"1.12: set tracepoint in prologue"
+
+# 8.14 tfind pc x
+## check pc == x, $trace_frame != -1
+gdb_tfind_test "8.14: tfind 3" "3" "3"
+gdb_test "print \$trace_line" "$testline4" \
+	"8.14: tfind 3 (line $testline4)"
+
+gdb_test "set \$test_pc = \$pc" "" ""
+gdb_tfind_test "8.14: tfind none" "none" "-1"
+gdb_tfind_test "8.14: tfind pc" "pc \$test_pc" "\$trace_frame != -1" "1";
+gdb_test "print \$trace_line" "$testline4" \
+	"8.14: tfind pc x (line $testline4)"
+gdb_test "printf \"x \%d x\\n\", \$pc == \$test_pc" \
+	"x 1 x" \
+	"8.14: tfind pc x"
+
+# 8.15 tfind pc <no arg>
+## check pc same before and after, $trace_frame changed
+gdb_tfind_test "8.15: tfind 3" "3" "3"
+gdb_test "print \$trace_line" "$testline4" \
+	"8.15: tfind 3 (line $testline4)"
+gdb_test "set \$test_pc = \$pc" "" ""
+gdb_tfind_test "8.15: tfind pc" "pc" "\$pc == \$test_pc" "1"
+gdb_test "print \$trace_line" "$testline4" \
+	"8.15: tfind pc (line $testline4)"
+gdb_test "printf \"x \%d x\\n\", \$trace_frame != 3" "x 1 x" \
+	"8.15: trace frame didn't change"
+
+# 8.26 tfind pc invalid x
+## check error, pc != x (trace_frame unchanged?)
+gdb_tfind_test "8.26: tfind start" "start" "0"
+gdb_test "tfind pc  0" "failed to find.*" "8.26: tfind pc zero"
+gdb_test "tfind pc -1" "failed to find.*" "8.26: tfind pc -1"
+
+# 8.16 tfind line n
+## check #trace_frame != -1, $trace_line == n
+gdb_tfind_test "8.16: tfind none" "none" "-1"
+gdb_tfind_test "8.16: tfind line $testline3" \
+	"line $testline3" \
+	"\$trace_line == $testline3" "1"
+
+# 8.17 tfind line <no arg> (# 8.19, 8.20)
+## check $trace_line changed, no error, pc changed, frame changed, tdp changed
+gdb_tfind_test "8.17: tfind none" "none" "-1"
+gdb_tfind_test "8.17: tfind line $testline3" "line $testline3" "\$trace_line == $testline3" "1"
+gdb_tfind_test "8.17: tfind line <no arg>" "line" "\$trace_line != $testline3" "1"
+
+# 8.36 tfind and disassembly
+gdb_tfind_test "8.36: tfind start" "start" "0"
+set timeout 60
+send_gdb "disassemble gdb_c_test\n"
+# look for disassembly of function label
+gdb_expect {
+    -re "<gdb_c_test>:.*$gdb_prompt $"      { pass "8.36: trace disassembly" }
+    -re ".*$gdb_prompt $"                   { fail "8.36: trace disassembly" }
+    timeout                       { fail "8.36: trace disassembly (timeout)" }
+}
+
+gdb_test "tfind line 0" \
+	"out of range.*|failed to find.*" \
+	"8.18: tfind line 0";
+gdb_test "tfind line 32767" \
+	"out of range.*|failed to find.*" \
+	"8.27: tfind line 32767";
+gdb_test "tfind line NoSuChFiLe.c:$baseline" \
+	"No source file named.*" \
+	"8.27: tfind line in bad source file";
+
+# 8.32 tfind invalid subcommand (tfind foo) 
+## check error
+gdb_test "tfind NoSuChOpTiOn 21" \
+	"No symbol.*|\[Ww\]arning.*|\[Ee\]rror.*" \
+	"8.32: tfind with bad subcommand"
+
+# 8.38 test help tfind
+gdb_test "help tfind"       "Select a trace frame.*"      \
+	"8.38: help tfind"
+gdb_test "help tfind pc"    "Select a trace frame by PC.*" \
+	"8.38: help tfind PC"
+gdb_test "help tfind end"   "Synonym for 'none'.*"        \
+	"8.38: help tfind end"
+gdb_test "help tfind none"  "De-select any trace frame.*" \
+	"8.38: help tfind none"
+gdb_test "help tfind line"  "Select a trace frame by source line.*" \
+	"8.38: help tfind line"
+gdb_test "help tfind start" "Select the first trace frame.*" \
+	"8.38: help tfind start"
+gdb_test "help tfind range" "Select a trace frame whose PC is in.*" \
+	"8.38: help tfind range"
+gdb_test "help tfind trace" "Select a trace frame by tracepoint number.*" \
+	"8.38: help tfind tracepoint"
+
+# Finished!
+gdb_tfind_test "8.17: tfind none" "none" "-1"
diff --git a/gdb/testsuite/gdb.trace/tracecmd.exp b/gdb/testsuite/gdb.trace/tracecmd.exp
new file mode 100644
index 0000000..9ba5501
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/tracecmd.exp
@@ -0,0 +1,269 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+# define relative source line numbers:
+# all subsequent line numbers are relative to this first one (baseline)
+set baseline  [gdb_find_recursion_test_baseline $srcfile];
+if { $baseline == -1 } then {
+    fail "Could not find gdb_recursion_test function"
+    return;
+}
+
+set testline1 [expr $baseline + 1]
+set testline2 [expr $baseline + 3]
+
+#
+# test "help tracepoints"
+#
+
+set helpcnt 0;
+send_gdb "help tracepoints\n"
+gdb_expect {
+    -re "Tracing of program execution without stopping the program." {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "actions -- Specify the actions to be taken at a tracepoint" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "collect -- Specify one or more data items to be collected" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "delete tracepoints -- Delete specified tracepoints" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "end -- Ends a list of.*actions" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "info tracepoints -- Status of tracepoints" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "passcount -- Set the passcount for a tracepoint" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "save-tracepoints -- Save current tracepoint definitions" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tdump -- Print everything collected at the current tracepoint" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind -- Select a trace frame" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind end -- Synonym for 'none'" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind line -- Select a trace frame by line number" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind none -- De-select any trace frame and resume 'live' debugging" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind outside -- Select a trace frame whose PC is outside" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind pc -- Select a trace frame by PC" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind range -- Select a trace frame whose PC is in the given" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind start -- Select the first trace frame in the trace buffer" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tfind tracepoint -- Select a trace frame by tracepoint number" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "trace -- Set a tracepoint at a specified line or function or addr" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tstart -- Start trace data collection" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tstatus -- Display the status of the current trace data collection" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "tstop -- Stop trace data collection" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re "while-stepping -- Specify single-stepping behavior at a tracepoint" {
+	incr helpcnt;
+	exp_continue
+    }
+    -re ".*$gdb_prompt $" {
+	if { $helpcnt == 21 } {
+	    pass "1.0: help tracepoints"
+	} else {
+	    warning "$helpcnt";
+	    fail "1.0: help tracepoints"
+	}
+    }
+}
+
+#
+# test trace command:
+#
+
+# 1.1 trace source line
+gdb_delete_tracepoints
+gdb_test "trace $srcfile:$testline2" \
+	"Tracepoint $decimal at $hex: file.*$srcfile, line $testline2." \
+	"1.1a: set tracepoint at sourceline"
+gdb_test "info trace" "in gdb_recursion_test.*$srcfile:$testline2" \
+	"1.1b: trace sourcefile:line"
+
+# 1.2 trace invalid source line
+gdb_delete_tracepoints
+gdb_test "trace $srcfile:99999" "No line 99999 in file \".*$srcfile\"." \
+	"1.2a: trace invalid line in sourcefile"
+gdb_test "info trace" "No tracepoints.*" \
+	"1.2b: reject invalid line in srcfile"
+
+# 1.3 trace line in invalid source file
+gdb_delete_tracepoints
+gdb_test "trace NoSuChFiLe.c:1" "No source file named NoSuChFiLe.c." \
+	"1.3a: trace invalid source file"
+gdb_test "info trace" "No tracepoints.*" \
+	"1.3b: reject invalid srcfile"
+
+# 1.4 trace function by name
+gdb_delete_tracepoints
+gdb_test "trace gdb_recursion_test" \
+	"Tracepoint $decimal at $hex: file.*$srcfile, line $testline1." \
+	"1.4a: trace function by name"
+gdb_test "info trace" "in gdb_recursion_test.*$srcfile:$testline1" \
+	"1.4b: trace function by name"
+
+# 1.5 trace non-existant function
+gdb_delete_tracepoints
+gdb_test "trace NoSuChFuNc" "Function \"NoSuChFuNc\" not defined." \
+	"1.5a: trace invalid function"
+gdb_test "info trace" "No tracepoints.*" \
+	"1.5b: reject invalid srcfile"
+
+# 1.6 trace at a specific address
+#     Collect the address of "gdb_asm_test", and use that.
+send_gdb "print gdb_asm_test\n"
+gdb_expect {
+    -re "\[$\]\[0-9\].*0x(\[0-9a-fA-F\]+).*$gdb_prompt $" {
+	set asm_test_addr $expect_out(1,string)
+    }
+    timeout { }
+}
+
+gdb_delete_tracepoints
+gdb_test "trace \*0x$asm_test_addr" \
+	"Tracepoint $decimal at .*$asm_test_addr.*" \
+	"1.6a: trace at specific address"
+gdb_test "info trace" "$asm_test_addr.*gdb_asm_test.*" \
+	"1.6b: verify trace at specific address"
+
+# 1.7 trace at function's exact address
+#     Collect the address of the function for comparison
+send_gdb "print gdb_recursion_test\n"
+gdb_expect {
+    -re "\[$\]\[0-9\].*0x(\[0-9a-fA-F\]+).*$gdb_prompt $" {
+	set c_test_addr $expect_out(1,string)
+    }
+    timeout { }
+}
+
+gdb_delete_tracepoints
+gdb_test "trace \*gdb_recursion_test" \
+	"Tracepoint $decimal at .*$c_test_addr.*" \
+	"1.7a: trace at function label (before prologue)"
+gdb_test "info trace" "$c_test_addr.*in gdb_recursion_test.*:$baseline" \
+	"1.7b: verify trace at specific address"
+
+# 1.8 trace at invalid address
+# no address is invalid
+
+# 1.9 trace no arguments
+gdb_test "trace" "trace command requires an argument" \
+	"1.9: trace <no arguments>"
+
+# 1.10 set large number of tracepoints
+# deferred to limits test module
+
+# 1.11 tracepoint conditions
+# conditions on tracepoints not implemented
+
+# 1.12 set tracepoint in prologue
+# [see tfind.exp]
+
+# 1.13 trace on recursion
+# interesting only in "live" session: see backtrace.exp for live test.
+
+# 1.14 help trace
+gdb_test "help trace" "Set a tracepoint at .*" "1.14: help trace"
+
+
diff --git a/gdb/testsuite/gdb.trace/while-dyn.exp b/gdb/testsuite/gdb.trace/while-dyn.exp
new file mode 100644
index 0000000..a6ff0fc
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/while-dyn.exp
@@ -0,0 +1,124 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp"
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    load_lib "emc-support.exp"
+    set testfile "gdb_c_test"
+    set srcfile  $testfile.c
+    set binfile [board_info target d490_binfile];
+    gdb_test "set remotetimeout 6" "" ""
+    set timeout 500
+    gdb_target_monitor "$binfile"
+    # Give a TSTOP and ignore errors, to make sure any previous trace is off
+    gdb_test "tstop" "" ""
+    gdb_test "tfind none"  "" ""
+    send_gdb "compare-section CS\n"
+    gdb_expect {
+	-re "MIS-MATCHED.*$gdb_prompt $" {
+	    gdb_suppress_entire_file "Symbol file does not match target!
+	    all tests in this module will fail.";
+	}
+	-re ".*$gdb_prompt $" { }
+    }
+} else {
+    set testfile "actions"
+    set srcfile $testfile.c
+    set binfile $objdir/$subdir/$testfile
+    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+    gdb_load $binfile
+    gdb_test "tstop"       "" ""
+    gdb_test "tfind none"  "" ""
+    runto_main
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# We generously give ourselves one "pass" if we successfully 
+# detect that this test cannot be run on this target!
+if { ![gdb_target_supports_trace] } then {
+    pass "Current target does not supporst trace"
+    return 1;
+
+}
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+#
+# test while-stepping dynamically (live target)
+#
+
+## verify number of trace frames collected matches stepcount
+
+gdb_delete_tracepoints
+gdb_test "trace gdb_c_test" \
+	"Tracepoint $decimal at .*" \
+	"Set tracepoint at gdb_c_test"
+
+gdb_trace_setactions "5.12: define while-stepping <stepcount>" \
+	"" \
+	"collect \$fp" "^$" \
+	"while-stepping 5" "^$" \
+	"collect p" "^$" \
+	"end" "^$" \
+	"end" ""
+
+gdb_test "tstart" "" ""
+
+if [istarget "m68k-*-elf"] then {
+    gdb_emclaptop_command "85,1,2,3,4,5,6"
+    sleep 5
+} else {
+    gdb_test "break end" "" ""
+    gdb_test "continue" \
+	    "Continuing.*Breakpoint $decimal, end.*" \
+	    "run trace experiment"
+}
+
+gdb_test "tstop" "" ""
+
+gdb_tfind_test "5.12: frame 5 should be the last one collected" "5" "5"
+
+send_gdb "tfind 6\n"
+gdb_expect {
+    -re "failed to find.*$gdb_prompt $" {
+	pass "5.12: trace stopped after 5 stepping frames"
+    }
+    -re ".*$gdb_prompt $" {
+	fail "5.12: trace stopped after 5 stepping frames"
+    }
+}
+
+gdb_test "tfind none" "" ""
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
new file mode 100644
index 0000000..610bd41
--- /dev/null
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -0,0 +1,116 @@
+#   Copyright (C) 1998 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Michael Snyder (msnyder@cygnus.com)
+
+load_lib "trace-support.exp";
+
+if $tracelevel then {
+    strace $tracelevel
+}
+
+set prms_id 0
+set bug_id 0
+
+gdb_exit
+gdb_start
+
+if [istarget "m68k-*-elf"] then {
+    set srcfile gdb_c_test.c
+    set binfile [board_info target d490_binfile];
+} else {
+    set testfile "actions"
+    set srcfile ${testfile}.c
+    set binfile ${objdir}/${subdir}/${testfile}
+    if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" $binfile \
+	    executable {debug additional_flags=-w}] != "" } {
+	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+    }
+}
+gdb_reinitialize_dir $srcdir/$subdir
+
+# If testing on a remote host, download the source file.
+# remote_download host $srcdir/$subdir/$srcfile
+
+gdb_file_cmd $binfile
+
+#
+# test while-stepping command
+#
+
+gdb_delete_tracepoints
+set trcpt1 [gdb_gettpnum gdb_c_test]
+if { $trcpt1 <= 0 } then {
+    fail "Could not find gdb_c_test function"
+    return;
+}
+
+# 5.12 basic while-stepping command (collect regs)
+
+gdb_test "info tracepoints" \
+	"Num Enb Address    PassC StepC What.*$trcpt1.*0x.*\[\t \]+\[0-9\]+\[\t \]+0\[\t \]+.*in gdb_c_test.*" \
+	"5.12: set a tracepoint, stepcount is zero"
+
+set stepcount 12
+
+gdb_trace_setactions "5.12: set stepcount to $stepcount" \
+	"" \
+	"while-stepping $stepcount" "" \
+	"collect \$regs" "^$" \
+	"end" ""
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*$trcpt1.*0x.*\[\t \]+\[0-9\]+\[\t \]+$stepcount\[\t \]+.*in gdb_c_test.*" \
+	"5.12: confirm stepcount set to $stepcount"
+
+gdb_test "info tracepoints" \
+    "Num Enb Address    PassC StepC What.*
+.*while-stepping $stepcount.*" \
+	"5.12: info trace shows \"while-stepping\""
+
+
+# 5.13 step out of context while collecting local variable
+#      [deferred to dynamic test section]
+
+proc while_stepping_bogus_arg { bogus msgstring } {
+    global gdb_prompt;
+
+    gdb_trace_setactions "$msgstring" \
+	    "" \
+	    "while-stepping $bogus" "\[Ee\]rror|\[Ww\]arning"
+}
+
+# 5.14 while-stepping (no argument)
+
+while_stepping_bogus_arg "" "5.14: while-stepping null stepcount"
+
+# 5.15 while-stepping (zero stepcount)
+
+while_stepping_bogus_arg "0" "5.15: while-stepping rejects zero stepcount"
+
+# 5.16 while-stepping without collecting anything
+gdb_trace_setactions "5.16: step without collecting anything" \
+	"" \
+	"while-stepping $stepcount" "^$" \
+	"end" ""
+
+gdb_test "info tracepoints" \
+	".*$trcpt1.*0x.*\[\t \]+\[0-9\]+\[\t \]+$stepcount\[\t \]+.*in gdb_c_test.*\[ \t\]+Actions for tracepoint $trcpt1:.*\[ \t\]+while-stepping $stepcount.*\[ \t\]+end.*\[ \t\]+end.*" \
+	"5.16: confirm actions, step without collecting anything"
+
diff --git a/gdb/testsuite/lib/emc-support.exp b/gdb/testsuite/lib/emc-support.exp
new file mode 100644
index 0000000..70bf2df
--- /dev/null
+++ b/gdb/testsuite/lib/emc-support.exp
@@ -0,0 +1,223 @@
+proc gdb_emc_readvar { varname } {
+    global gdb_prompt;
+
+    set result -1;
+    send_gdb "print $varname\n"
+    gdb_expect 5 {
+	-re "\[$\].*= (\[0-9\]+).*$gdb_prompt $" {
+	    set result $expect_out(1,string);
+	}
+	-re "$gdb_prompt $" { }
+	default { }
+    }
+    return $result;
+}
+    
+proc gdb_emc_gettpnum { testname } {
+    global gdb_prompt;
+
+    if { $testname != "" } {
+	gdb_test "trace $testname" "" ""
+    }
+    return [gdb_emc_readvar "\$tpnum"];
+}
+
+proc gdb_emc_setactions { testname actionname args } {
+    global gdb_prompt;
+
+    set state 0;
+    set status "pass";
+    send_gdb "actions $actionname\n";
+    set expected_result "";
+    gdb_expect 5 {
+	-re "No tracepoint number .*$gdb_prompt $" {
+	    fail $testname
+	    return 1;
+	}
+	-re "Enter actions for tracepoint $actionname.*>" {
+	    if { [llength $args] > 0 } {
+		set lastcommand "[lindex $args $state]";
+		send_gdb "[lindex $args $state]\n";
+		incr state;
+		set expected_result [lindex $args $state];
+		incr state;
+	    } else {
+		send_gdb "end\n";
+	    }
+	    exp_continue;
+	}
+	-re "\(.*\[\r\n\]+)\[ \t]*> $" {
+	    if { $expected_result != "" } {
+		# Remove echoed command and its associated newline.
+		regsub "^\[^\r\n\]+\[\r\n\]+" "$expect_out(1,string)" "" out;
+		# Strip off any newlines at the end of the string.
+		regsub "\[\r\n\]+$" "$out" "" out;
+		verbose "expected '$expected_result', got '$out', expect_out is '$expect_out(1,string)'";
+		if ![regexp $expected_result $out] {
+		    set status "fail";
+		}
+		set expected_result "";
+	    }
+	    if { $state < [llength $args] } {
+		send_gdb "[lindex $args $state]\n";
+		incr state;
+		set expected_result [lindex $args $state];
+		incr state;
+	    } else {
+		send_gdb "end\n";
+		set expected_result "";
+	    }
+	    exp_continue;
+	}
+	-re "\(.*\)$gdb_prompt $" {
+	    if { $expected_result != "" } {
+		if ![regexp $expected_result $expect_out(1,string)] {
+		    set status "fail";
+		}
+		set expected_result "";
+	    }
+	    if { [llength $args] < $state } {
+		set status "fail";
+	    }
+	}
+	default {
+	    set status "fail";
+	}
+    }
+    if { $testname != "" } {
+	$status $testname;
+    }
+    if { $status == "pass" } then { 
+	return 0;
+    } else {
+	return 1;
+    }
+}
+
+#
+# test collect command
+#
+
+proc gdb_emc_tracetest_collect { arg1 msgstring } {
+    global decimal
+    global gdb_prompt;
+
+    set teststate 0
+    gdb_expect 30 {
+        -re "Enter actions for tracepoint $decimal.*> $" {
+            send_gdb "collect $arg1\n"
+            incr teststate;
+            exp_continue
+        }
+        -re "> $" {
+            if { $teststate == 1 } {
+                send_gdb "end\n"
+		incr teststate;
+                exp_continue
+            } else { 
+                fail "$msgstring"
+            }
+        }
+        -re ".*$gdb_prompt $" {
+            if { $teststate == 2 } {
+                pass "$msgstring";
+            } else { 
+                fail "$msgstring";
+            }
+        }
+        default { 
+            fail "$msgstring (default)";
+        }
+    }
+    regsub -all "(\[($@*+)\])" "collect $arg1" "\[\\1\]" arg1_regexp;
+    gdb_test "info tracepoints" ".*$arg1_regexp.*" "$msgstring info tracepoint"
+}
+
+proc gdb_delete_tracepoints { } {
+    global gdb_prompt;
+
+    send_gdb "delete tracepoints\n"
+    gdb_expect 30 {
+	-re "Delete all tracepoints.*y or n.*$" {
+	    send_gdb "y\n"
+	    exp_continue;
+	}
+	-re "$gdb_prompt $" { }
+	timeout { fail "delete all tracepoints (timeout)" }
+    }
+}
+
+
+# Send each command in the list CMDLIST to gdb. If we see the string
+# "error" or "warning" from gdb, we assume an error has occured and
+# return a non-zero result. All of the commands in CMDLIST are always
+# sent, even if an error occurs.
+# If TESTNAME is non-null, we call pass or fail with the string in TESTNAME
+# depending on whether or not an error/warning has occurred.
+#
+proc gdb_do_cmdlist { cmdlist testname } {
+    global gdb_prompt;
+
+    set status 0;
+
+    foreach x $cmdlist {
+	send_gdb "$x\n";
+	gdb_expect 60 {
+	    -re "\[Ee\]rror|\[Ww\]arning" {
+		set status 1;
+		exp_continue;
+	    }
+	    -re "$gdb_prompt $" { }
+	    -re "\[\r\n\]\[ \t\]*> *$" { }
+	}
+    }
+    if { $testname != "" } {
+	if { $status == 0 } {
+	    pass "$testname";
+	} else {
+	    fail "$testname";
+	}
+    }
+    return $status;
+}
+
+#
+# Given the file FILENAME, we read it as a list of commands and generate
+# a list suitable for use by gdb_do_cmdlist. Lines beginning with # are
+# ignored; blank lines are interpreted as empty lines to be sent to gdb.
+#
+proc gdb_process_cmdfile { filename } {
+    set id [open $filename "r"];
+    if { $id < 0 } {
+	return "";
+    }
+    set result {};
+    while { [gets $id line] >= 0 } {
+	if [regexp "^#" $line] {
+	    continue;
+	}
+	set result [concat $result [list "$line"]];
+    }
+    close $id;
+    return $result;
+}
+
+# gdb_find_c_test_baseline
+# returns -1 on failure (CALLER MUST CHECK RETURN!)
+proc gdb_find_c_test_baseline { } {
+    global gdb_prompt;
+
+    set gdb_c_test_baseline -1;
+
+    send_gdb "list gdb_c_test\n"
+    gdb_expect {
+	-re "void.*p5,.*void.*p6.*\[\r\n\](\[0-9\]+)\[\t \]+\{.*$gdb_prompt $" {
+	    set gdb_c_test_baseline $expect_out(1,string)
+	}
+	-re "$gdb_prompt $" { }
+	default { }
+    }
+    return $gdb_c_test_baseline;
+}
+
+
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
new file mode 100644
index 0000000..c61abb6
--- /dev/null
+++ b/gdb/testsuite/lib/gdb.exp
@@ -0,0 +1,1334 @@
+# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+# This file was written by Fred Fish. (fnf@cygnus.com)
+
+# Generic gdb subroutines that should work for any target.  If these
+# need to be modified for any target, it can be done with a variable
+# or by passing arguments.
+
+load_lib libgloss.exp
+
+global GDB
+global CHILL_LIB
+global CHILL_RT0
+
+if ![info exists CHILL_LIB] {
+    set CHILL_LIB [findfile $base_dir/../../gcc/ch/runtime/libchill.a "$base_dir/../../gcc/ch/runtime/libchill.a" [transform -lchill]]
+}
+verbose "using CHILL_LIB = $CHILL_LIB" 2
+if ![info exists CHILL_RT0] {
+    set CHILL_RT0 [findfile $base_dir/../../gcc/ch/runtime/chillrt0.o "$base_dir/../../gcc/ch/runtime/chillrt0.o" ""]
+}
+verbose "using CHILL_RT0 = $CHILL_RT0" 2
+
+if [info exists TOOL_EXECUTABLE] {
+    set GDB $TOOL_EXECUTABLE;
+}
+if ![info exists GDB] {
+    if ![is_remote host] {
+	set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]]
+    } else {
+	set GDB [transform gdb];
+    }
+}
+verbose "using GDB = $GDB" 2
+
+global GDBFLAGS
+if ![info exists GDBFLAGS] {
+    set GDBFLAGS "-nx"
+}
+verbose "using GDBFLAGS = $GDBFLAGS" 2
+
+# The variable prompt is a regexp which matches the gdb prompt.  Set it if it
+# is not already set.
+global gdb_prompt
+if ![info exists prompt] then {
+    set gdb_prompt "\[(\]gdb\[)\]"
+}
+
+#
+# gdb_version -- extract and print the version number of GDB
+#
+proc default_gdb_version {} {
+    global GDB
+    global GDBFLAGS
+    global gdb_prompt
+    set fileid [open "gdb_cmd" w];
+    puts $fileid "q";
+    close $fileid;
+    set cmdfile [remote_download host "gdb_cmd"];
+    set output [remote_exec host "$GDB -nw --command $cmdfile"]
+    remote_file build delete "gdb_cmd";
+    remote_file host delete "$cmdfile";
+    set tmp [lindex $output 1];
+    set version ""
+    regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version
+    if ![is_remote host] {
+	clone_output "[which $GDB] version $version $GDBFLAGS\n"
+    } else {
+	clone_output "$GDB on remote host version $version $GDBFLAGS\n"
+    }
+}
+
+proc gdb_version { } {
+    return [default_gdb_version];
+}
+
+#
+# gdb_unload -- unload a file if one is loaded
+#
+
+proc gdb_unload {} {
+    global verbose
+    global GDB
+    global gdb_prompt
+    send_gdb "file\n"
+    gdb_expect 60 {
+	-re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue }
+	-re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue }
+	-re "A program is being debugged already..*Kill it.*y or n. $"\
+	    { send_gdb "y\n"
+		verbose "\t\tKilling previous program being debugged"
+	    exp_continue
+	}
+	-re "Discard symbol table from .*y or n.*$" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re "$gdb_prompt $" {}
+	timeout {
+	    perror "couldn't unload file in $GDB (timed out)."
+	    return -1
+	}
+    }
+}
+
+# Many of the tests depend on setting breakpoints at various places and
+# running until that breakpoint is reached.  At times, we want to start
+# with a clean-slate with respect to breakpoints, so this utility proc 
+# lets us do this without duplicating this code everywhere.
+#
+
+proc delete_breakpoints {} {
+    global gdb_prompt
+
+    send_gdb "delete breakpoints\n"
+    gdb_expect 30 {
+	 -re "Delete all breakpoints.*y or n.*$" {
+	    send_gdb "y\n";
+	    exp_continue
+	}
+	 -re "$gdb_prompt $" { # This happens if there were no breakpoints
+	    }
+	 timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return }
+    }
+    send_gdb "info breakpoints\n"
+    gdb_expect 30 {
+	 -re "No breakpoints or watchpoints..*$gdb_prompt $" {}
+	 -re "$gdb_prompt $" { perror "breakpoints not deleted" ; return }
+	 -re "Delete all breakpoints.*or n.*$" {
+	    send_gdb "y\n";
+	    exp_continue
+	}
+	 timeout { perror "info breakpoints (timeout)" ; return }
+    }
+}
+
+
+#
+# Generic run command.
+#
+# The second pattern below matches up to the first newline *only*.
+# Using ``.*$'' could swallow up output that we attempt to match
+# elsewhere.
+#
+proc gdb_run_cmd {args} {
+    global gdb_prompt
+
+    if [target_info exists gdb_init_command] {
+	send_gdb "[target_info gdb_init_command]\n";
+	gdb_expect 30 {
+	    -re "$gdb_prompt $" { }
+	    default {
+		perror "gdb_init_command for target failed";
+		return;
+	    }
+	}
+    }
+
+    if [target_info exists use_gdb_stub] {
+	if [target_info exists gdb,do_reload_on_run] {
+	    # According to Stu, this will always work.
+	    gdb_load "";
+	    send_gdb "continue\n";
+	    gdb_expect 60 {
+		-re "Continu\[^\r\n\]*\[\r\n\]" {}
+		default {}
+	    }
+	    return;
+	}
+
+	if [target_info exists gdb,start_symbol] {
+	    set start [target_info gdb,start_symbol];
+	} else {
+	    set start "start";
+	}
+	send_gdb  "jump *$start\n"
+	gdb_expect 30 {
+	    -re "Continuing at \[^\r\n\]*\[\r\n\]" {
+		if ![target_info exists gdb_stub] {
+		    return;
+		}
+	    }
+	    -re "No symbol \"start\" in current.*$gdb_prompt $" {
+		send_gdb "jump *_start\n";
+		exp_continue;
+	    }
+	    -re "No symbol \"_start\" in current.*$gdb_prompt $" {
+		perror "Can't find start symbol to run in gdb_run";
+		return;
+	    }
+	    -re "Line.* Jump anyway.*y or n. $" {
+		send_gdb "y\n"
+		exp_continue;
+            }
+	    -re "No symbol.*context.*$gdb_prompt $" {}
+	    -re "The program is not being run.*$gdb_prompt $" {
+		gdb_load "";
+		send_gdb "jump *$start\n";
+		exp_continue;
+	    }
+	    timeout { perror "Jump to start() failed (timeout)"; return }
+	}
+	if [target_info exists gdb_stub] {
+	    gdb_expect 60 {
+		-re "$gdb_prompt $" {
+		    send_gdb "continue\n"
+		}
+	    }
+	}
+	return
+    }
+    send_gdb "run $args\n"
+# This doesn't work quite right yet.
+    gdb_expect 60 {
+	-re "The program .* has been started already.*y or n. $" {
+	    send_gdb "y\n"
+	    exp_continue
+	}
+	-re "Starting program: \[^\r\n\]*" {}
+    }
+}
+
+proc gdb_breakpoint { function } {
+    global gdb_prompt
+    global decimal
+
+    send_gdb "break $function\n"
+    # The first two regexps are what we get with -g, the third is without -g.
+    gdb_expect 30 {
+	-re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
+	-re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
+	-re "Breakpoint \[0-9\]* at .*$gdb_prompt $" {}
+	-re "$gdb_prompt $" { fail "setting breakpoint at $function" ; return 0 }
+	timeout { fail "setting breakpoint at $function (timeout)" ; return 0 }
+    }
+    return 1;
+}    
+
+# Set breakpoint at function and run gdb until it breaks there.
+# Since this is the only breakpoint that will be set, if it stops
+# at a breakpoint, we will assume it is the one we want.  We can't
+# just compare to "function" because it might be a fully qualified,
+# single quoted C++ function specifier.
+
+proc runto { function } {
+    global gdb_prompt
+    global decimal
+
+    delete_breakpoints
+
+    if ![gdb_breakpoint $function] {
+	return 0;
+    }
+
+    gdb_run_cmd
+    
+    # the "at foo.c:36" output we get with -g.
+    # the "in func" output we get without -g.
+    gdb_expect 30 {
+	-re "Break.* at .*:$decimal.*$gdb_prompt $" {
+	    return 1
+	}
+	-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { 
+	    return 1
+	}
+	-re "$gdb_prompt $" { 
+	    fail "running to $function in runto"
+	    return 0
+	}
+	timeout { 
+	    fail "running to $function in runto (timeout)"
+	    return 0
+	}
+    }
+    return 1
+}
+
+#
+# runto_main -- ask gdb to run until we hit a breakpoint at main.
+#		The case where the target uses stubs has to be handled
+#		specially--if it uses stubs, assuming we hit
+#		breakpoint() and just step out of the function.
+#
+proc runto_main { } {
+    global gdb_prompt
+    global decimal
+
+    if ![target_info exists gdb_stub] {
+	return [runto main]
+    }			
+
+    delete_breakpoints
+
+    gdb_step_for_stub;
+
+    return 1
+}
+
+# gdb_test COMMAND PATTERN MESSAGE -- send a command to gdb; test the result.
+#
+# COMMAND is the command to execute, send to GDB with send_gdb.  If
+#   this is the null string no command is sent.
+# PATTERN is the pattern to match for a PASS, and must NOT include
+#   the \r\n sequence immediately before the gdb prompt.
+# MESSAGE is an optional message to be printed.  If this is
+#   omitted, then the pass/fail messages use the command string as the
+#   message.  (If this is the empty string, then sometimes we don't
+#   call pass or fail at all; I don't understand this at all.)
+#
+# Returns:
+#    1 if the test failed,
+#    0 if the test passes,
+#   -1 if there was an internal error.
+#  
+proc gdb_test { args } {
+    global verbose
+    global gdb_prompt
+    global GDB
+    upvar timeout timeout
+
+    if [llength $args]>2 then {
+	set message [lindex $args 2]
+    } else {
+	set message [lindex $args 0]
+    }
+    set command [lindex $args 0]
+    set pattern [lindex $args 1]
+
+    if [llength $args]==5 {
+	set question_string [lindex $args 3];
+	set response_string [lindex $args 4];
+    } else {
+	set question_string "^FOOBAR$"
+    }
+
+    if $verbose>2 then {
+	send_user "Sending \"$command\" to gdb\n"
+	send_user "Looking to match \"$pattern\"\n"
+	send_user "Message is \"$message\"\n"
+    }
+
+    set result -1
+    set string "${command}\n";
+    if { $command != "" } {
+	while { "$string" != "" } {
+	    set foo [string first "\n" "$string"];
+	    set len [string length "$string"];
+	    if { $foo < [expr $len - 1] } {
+		set str [string range "$string" 0 $foo];
+		if { [send_gdb "$str"] != "" } {
+		    global suppress_flag;
+
+		    if { ! $suppress_flag } {
+			perror "Couldn't send $command to GDB.";
+		    }
+		    fail "$message";
+		    return $result;
+		}
+		gdb_expect 2 {
+		    -re "\[\r\n\]" { }
+		    timeout { }
+		}
+		set string [string range "$string" [expr $foo + 1] end];
+	    } else {
+		break;
+	    }
+	}
+	if { "$string" != "" } {
+	    if { [send_gdb "$string"] != "" } {
+		global suppress_flag;
+
+		if { ! $suppress_flag } {
+		    perror "Couldn't send $command to GDB.";
+		}
+		fail "$message";
+		return $result;
+	    }
+	}
+    }
+
+    if [info exists timeout] {
+	set tmt $timeout;
+    } else {
+	global timeout;
+	if [info exists timeout] {
+	    set tmt $timeout;
+	} else {
+	    set tmt 60;
+	}
+    }
+    gdb_expect $tmt {
+	 -re "\\*\\*\\* DOSEXIT code.*" {
+	     if { $message != "" } {
+		 fail "$message";
+	     }
+	     gdb_suppress_entire_file "GDB died";
+	     return -1;
+	 }
+	 -re "Ending remote debugging.*$gdb_prompt$" {
+	    if ![isnative] then {
+		warning "Can`t communicate to remote target."
+	    }
+	    gdb_exit
+	    gdb_start
+	    set result -1
+	}
+	 -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
+	    if ![string match "" $message] then {
+		pass "$message"
+	    }
+	    set result 0
+	}
+	 -re "(${question_string})$" {
+	    send_gdb "$response_string\n";
+	    exp_continue;
+	}
+	 -re "Undefined command:.*$gdb_prompt" {
+	    perror "Undefined command \"$command\"."
+	    set result 1
+	}
+	 -re "Ambiguous command.*$gdb_prompt $" {
+	    perror "\"$command\" is not a unique command name."
+	    set result 1
+	}
+	 -re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
+	    if ![string match "" $message] then {
+		set errmsg "$message: the program exited"
+	    } else {
+		set errmsg "$command: the program exited"
+	    }
+	    fail "$errmsg"
+	    return -1
+	}
+	 -re "The program is not being run.*$gdb_prompt $" {
+	    if ![string match "" $message] then {
+		set errmsg "$message: the program is no longer running"
+	    } else {
+		set errmsg "$command: the program is no longer running"
+	    }
+	    fail "$errmsg"
+	    return -1
+	}
+	 -re ".*$gdb_prompt $" {
+	    if ![string match "" $message] then {
+		fail "$message"
+	    }
+	    set result 1
+	}
+	 "<return>" {
+	    send_gdb "\n"
+	    perror "Window too small."
+	}
+	 -re "\\(y or n\\) " {
+	    send_gdb "n\n"
+	    perror "Got interactive prompt."
+	}
+	 eof {
+	     perror "Process no longer exists"
+	     if { $message != "" } {
+		 fail "$message"
+	     }
+	     return -1
+	}
+	 full_buffer {
+	    perror "internal buffer is full."
+	}
+	timeout	{
+	    if ![string match "" $message] then {
+		fail "$message (timeout)"
+	    }
+	    set result 1
+	}
+    }
+    return $result
+}
+
+# Test that a command gives an error.  For pass or fail, return
+# a 1 to indicate that more tests can proceed.  However a timeout
+# is a serious error, generates a special fail message, and causes
+# a 0 to be returned to indicate that more tests are likely to fail
+# as well.
+
+proc test_print_reject { args } {
+    global gdb_prompt
+    global verbose
+
+    if [llength $args]==2 then {
+	set expectthis [lindex $args 1]
+    } else {
+	set expectthis "should never match this bogus string"
+    }
+    set sendthis [lindex $args 0]
+    if $verbose>2 then {
+	send_user "Sending \"$sendthis\" to gdb\n"
+	send_user "Looking to match \"$expectthis\"\n"
+    }
+    send_gdb "$sendthis\n"
+    #FIXME: Should add timeout as parameter.
+    gdb_expect {
+	-re "A .* in expression.*\\.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "Invalid syntax in expression.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "Junk after end of expression.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "Invalid number.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "Invalid character constant.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "No symbol table is loaded.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "No symbol .* in current context.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re "$expectthis.*$gdb_prompt $" {
+	    pass "reject $sendthis"
+	    return 1
+	}
+	-re ".*$gdb_prompt $" {
+	    fail "reject $sendthis"
+	    return 1
+	}
+	default {
+	    fail "reject $sendthis (eof or timeout)"
+	    return 0
+	}
+    }
+}
+
+# Given an input string, adds backslashes as needed to create a
+# regexp that will match the string.
+
+proc string_to_regexp {str} {
+    set result $str
+    regsub -all {[]*+.|()^$\[]} $str {\\&} result
+    return $result
+}
+
+# Same as gdb_test, but the second parameter is not a regexp,
+# but a string that must match exactly.
+
+proc gdb_test_exact { args } {
+    upvar timeout timeout
+
+    set command [lindex $args 0]
+
+    # This applies a special meaning to a null string pattern.  Without
+    # this, "$pattern\r\n$gdb_prompt $" will match anything, including error
+    # messages from commands that should have no output except a new
+    # prompt.  With this, only results of a null string will match a null
+    # string pattern.
+
+    set pattern [lindex $args 1]
+    if [string match $pattern ""] {
+	set pattern [string_to_regexp [lindex $args 0]]
+    } else {
+	set pattern [string_to_regexp [lindex $args 1]]
+    }
+
+    # It is most natural to write the pattern argument with only
+    # embedded \n's, especially if you are trying to avoid Tcl quoting
+    # problems.  But gdb_expect really wants to see \r\n in patterns.  So
+    # transform the pattern here.  First transform \r\n back to \n, in
+    # case some users of gdb_test_exact already do the right thing.
+    regsub -all "\r\n" $pattern "\n" pattern
+    regsub -all "\n" $pattern "\r\n" pattern
+    if [llength $args]==3 then {
+	set message [lindex $args 2]
+    } else {
+	set message $command
+    }
+
+    return [gdb_test $command $pattern $message]
+}
+
+proc gdb_reinitialize_dir { subdir } {
+    global gdb_prompt
+
+    if [is_remote host] {
+	return "";
+    }
+    send_gdb "dir\n"
+    gdb_expect 60 {
+	-re "Reinitialize source path to empty.*y or n. " {
+	    send_gdb "y\n"
+	    gdb_expect 60 {
+		-re "Source directories searched.*$gdb_prompt $" {
+		    send_gdb "dir $subdir\n"
+		    gdb_expect 60 {
+			-re "Source directories searched.*$gdb_prompt $" {
+			    verbose "Dir set to $subdir"
+			}
+			-re "$gdb_prompt $" {
+			    perror "Dir \"$subdir\" failed."
+			}
+		    }
+		}
+		-re "$gdb_prompt $" {
+		    perror "Dir \"$subdir\" failed."
+		}
+	    }
+	}
+	-re "$gdb_prompt $" {
+	    perror "Dir \"$subdir\" failed."
+	}
+    }
+}
+
+#
+# gdb_exit -- exit the GDB, killing the target program if necessary
+#
+proc default_gdb_exit {} {
+    global GDB
+    global GDBFLAGS
+    global verbose
+    global gdb_spawn_id;
+
+    gdb_stop_suppressing_tests;
+
+    if ![info exists gdb_spawn_id] {
+	return;
+    }
+
+    verbose "Quitting $GDB $GDBFLAGS"
+
+    if { [is_remote host] && [board_info host exists fileid] } {
+	send_gdb "quit\n";
+	gdb_expect 10 {
+	    -re "y or n" {
+		send_gdb "y\n";
+		exp_continue;
+	    }
+	    -re "DOSEXIT code" { }
+	    default { }
+	}
+    }
+
+    if ![is_remote host] {
+	remote_close host;
+    }
+    unset gdb_spawn_id
+}
+
+#
+# load a file into the debugger.
+# return a -1 if anything goes wrong.
+#
+proc gdb_file_cmd { arg } {
+    global verbose
+    global loadpath
+    global loadfile
+    global GDB
+    global gdb_prompt
+    upvar timeout timeout
+
+    if [is_remote host] {
+	set arg [remote_download host $arg];
+	if { $arg == "" } {
+	    error "download failed"
+	    return -1;
+	}
+    }
+
+    send_gdb "file $arg\n"
+    gdb_expect 120 {
+        -re "Reading symbols from.*done.*$gdb_prompt $" {
+            verbose "\t\tLoaded $arg into the $GDB"
+            return 0
+        }
+        -re "has no symbol-table.*$gdb_prompt $" {
+            perror "$arg wasn't compiled with \"-g\""
+            return -1
+        }
+        -re "A program is being debugged already.*Kill it.*y or n. $" {
+            send_gdb "y\n"
+                verbose "\t\tKilling previous program being debugged"
+            exp_continue
+        }
+        -re "Load new symbol table from \".*\".*y or n. $" {
+            send_gdb "y\n"
+            gdb_expect 120 {
+                -re "Reading symbols from.*done.*$gdb_prompt $" {
+                    verbose "\t\tLoaded $arg with new symbol table into $GDB"
+                    return 0
+                }
+                timeout {
+                    perror "(timeout) Couldn't load $arg, other program already loaded."
+                    return -1
+                }
+            }
+	}
+        -re "No such file or directory.*$gdb_prompt $" {
+            perror "($arg) No such file or directory\n"
+            return -1
+        }
+        -re "$gdb_prompt $" {
+            perror "couldn't load $arg into $GDB."
+            return -1
+            }
+        timeout {
+            perror "couldn't load $arg into $GDB (timed out)."
+            return -1
+        }
+        eof {
+            # This is an attempt to detect a core dump, but seems not to
+            # work.  Perhaps we need to match .* followed by eof, in which
+            # gdb_expect does not seem to have a way to do that.
+            perror "couldn't load $arg into $GDB (end of file)."
+            return -1
+        }
+    }
+}
+
+#
+# start gdb -- start gdb running, default procedure
+#
+# When running over NFS, particularly if running many simultaneous
+# tests on different hosts all using the same server, things can
+# get really slow.  Give gdb at least 3 minutes to start up.
+#
+proc default_gdb_start { } {
+    global verbose
+    global GDB
+    global GDBFLAGS
+    global gdb_prompt
+    global timeout
+    global gdb_spawn_id;
+
+    gdb_stop_suppressing_tests;
+
+    verbose "Spawning $GDB -nw $GDBFLAGS"
+
+    if [info exists gdb_spawn_id] {
+	return 0;
+    }
+
+    if ![is_remote host] {
+	if { [which $GDB] == 0 } then {
+	    perror "$GDB does not exist."
+	    exit 1
+	}
+    }
+    set res [remote_spawn host "$GDB -nw $GDBFLAGS [host_info gdb_opts]"];
+    if { $res < 0 || $res == "" } {
+	perror "Spawning $GDB failed."
+	return 1;
+    }
+    gdb_expect 360 {
+	-re "\[\r\n\]$gdb_prompt $" {
+	    verbose "GDB initialized."
+	}
+	-re "$gdb_prompt $"	{
+	    perror "GDB never initialized."
+	    return -1
+	}
+	timeout	{
+	    perror "(timeout) GDB never initialized after 10 seconds."
+	    remote_close host;
+	    return -1
+	}
+    }
+    set gdb_spawn_id -1;
+    # force the height to "unlimited", so no pagers get used
+
+    send_gdb "set height 0\n"
+    gdb_expect 10 {
+	-re "$gdb_prompt $" { 
+	    verbose "Setting height to 0." 2
+	}
+	timeout {
+	    warning "Couldn't set the height to 0"
+	}
+    }
+    # force the width to "unlimited", so no wraparound occurs
+    send_gdb "set width 0\n"
+    gdb_expect 10 {
+	-re "$gdb_prompt $" {
+	    verbose "Setting width to 0." 2
+	}
+	timeout {
+	    warning "Couldn't set the width to 0."
+	}
+    }
+    return 0;
+}
+
+# * For crosses, the CHILL runtime doesn't build because it can't find
+# setjmp.h, stdio.h, etc.
+# * For AIX (as of 16 Mar 95), (a) there is no language code for
+# CHILL in output_epilog in gcc/config/rs6000/rs6000.c, (b) collect2
+# does not get along with AIX's too-clever linker.
+# * On Irix5, there is a bug whereby set of bool, etc., don't get
+# TYPE_LOW_BOUND for the bool right because force_to_range_type doesn't
+# work with stub types.
+# Lots of things seem to fail on the PA, and since it's not a supported
+# chill target at the moment, don't run the chill tests.
+
+proc skip_chill_tests {} {
+    if ![info exists do_chill_tests] {
+	return 1;
+    }
+    eval set skip_chill [expr ![isnative] || [istarget "*-*-aix*"] || [istarget "*-*-irix5*"] || [istarget "*-*-irix6*"] || [istarget "alpha-*-osf*"] || [istarget "hppa*-*-*"]]
+    verbose "Skip chill tests is $skip_chill"
+    return $skip_chill
+}
+
+# skip all the tests in the file if you are not on an hppa running hpux target.
+# and you compiled with gcc
+proc skip_hp_tests {gcc_used} {
+  #  if ![info exists do_hp_tests] {
+  #	return 1;
+  #  }
+    eval set skip_hp [expr ![isnative] || ![istarget "hppa*-*-hpux*"] || $gcc_used!=0 ]
+    verbose "Skip hp tests is $skip_hp"
+    return $skip_hp
+}
+
+proc get_compiler_info {binfile args} {
+    # Create and source the file that provides information about the compiler
+    # used to compile the test case.
+    # Compiler_type can be null or c++. If null we assume c.
+    global srcdir
+    global subdir
+    # These two come from compiler.c.
+    global signed_keyword_not_used
+    global gcc_compiled
+
+    if {![istarget "hppa*-*-hpux*"]} {
+	if { [llength $args] > 0 } {
+	    if {$args == "c++"} {
+	if { [gdb_compile "${srcdir}/${subdir}/compiler.cc" "${binfile}.ci" preprocess {}] != "" } {
+		    perror "Couldn't make ${binfile}.ci file"
+		    return 1;
+		}
+	    }
+	} else {
+	    if { [gdb_compile "${srcdir}/${subdir}/compiler.c" "${binfile}.ci" preprocess {}] != "" } {
+		perror "Couldn't make ${binfile}.ci file"
+		return 1;
+	    }
+	}
+    } else {
+	if { [llength $args] > 0 } {
+	    if {$args == "c++"} {
+		if { [eval gdb_preprocess \
+			[list "${srcdir}/${subdir}/compiler.cc" "${binfile}.ci"] \
+			$args] != "" } {
+		    perror "Couldn't make ${binfile}.ci file"
+		    return 1;
+		}
+	    }
+	} else {
+	    if { [eval gdb_preprocess \
+		    [list "${srcdir}/${subdir}/compiler.c" "${binfile}.ci"] \
+		    $args] != "" } {
+		perror "Couldn't make ${binfile}.ci file"
+		return 1;
+	    }
+	}
+    }
+    
+    source ${binfile}.ci
+    return 0;
+}
+
+proc gdb_preprocess {source dest args} {
+    global CC_FOR_TARGET
+    global CXX_FOR_TARGET
+
+    if { [llength $args] == 0 } {
+        set which_compiler "c"
+    } else {
+        if { $args =="c++" } {
+            set which_compiler "c++"
+        } else {
+	    perror "Unknown compiler type supplied to gdb_preprocess"
+	    return 1;
+        }
+    }
+
+    if [info exists CC_FOR_TARGET] {
+	if { $which_compiler == "c"} {
+	    set compiler $CC_FOR_TARGET;
+	}
+    }
+ 
+    if [info exists CXX_FOR_TARGET] {
+	if { $which_compiler == "c++"} {
+	    set compiler $CXX_FOR_TARGET;
+	}
+    }
+
+    if { ![info exists compiler] } {
+        if { $which_compiler == "c" } {
+	    if {[info exists CC]} {
+		set compiler $CC;
+	    }
+	}
+        if { $which_compiler == "c++" } {
+	    if {[info exists CXX]} {
+		set compiler $CXX;
+	    }
+	}
+	if {![info exists compiler]} {
+	    set compiler [board_info [target_info name] compiler];
+	    if { $compiler == "" } {
+		puts "default_target_compile: No compiler to compile with";
+		return "default_target_compile: No compiler to compile with";
+	    }
+	}
+    }
+
+    set cmdline "$compiler -E $source > $dest"
+
+    verbose "Invoking $compiler -E $source > $dest"
+    verbose -log "Executing on local host: $cmdline" 2
+    set status [catch "exec ${cmdline}" exec_output]
+
+    set result [prune_warnings $exec_output]
+    regsub "\[\r\n\]*$" "$result" "" result;
+    regsub "^\[\r\n\]*" "$result" "" result;
+    if { $result != "" } {
+        clone_output "gdb compile failed, $result"
+    }
+    return $result;
+}
+
+proc gdb_compile {source dest type options} {
+    global GDB_TESTCASE_OPTIONS;
+
+    if [target_info exists gdb_stub] {
+	set options2 { "additional_flags=-Dusestubs" }
+	lappend options "libs=[target_info gdb_stub]";
+	set options [concat $options2 $options]
+    }
+    if [target_info exists is_vxworks] {
+	set options2 { "additional_flags=-Dvxworks" }
+	lappend options "libs=[target_info gdb_stub]";
+	set options [concat $options2 $options]
+    }
+    if [info exists GDB_TESTCASE_OPTIONS] {
+	lappend options "additional_flags=$GDB_TESTCASE_OPTIONS";
+    }
+    verbose "options are $options"
+    verbose "source is $source $dest $type $options"
+
+    set result [target_compile $source $dest $type $options];
+    regsub "\[\r\n\]*$" "$result" "" result;
+    regsub "^\[\r\n\]*" "$result" "" result;
+    if { $result != "" } {
+	clone_output "gdb compile failed, $result"
+    }
+    return $result;
+}
+
+proc send_gdb { string } {
+    global suppress_flag;
+    if { $suppress_flag } {
+	return "suppressed";
+    }
+    return [remote_send host "$string"];
+}
+
+#
+#
+
+proc gdb_expect { args } {
+    if { [llength $args] == 2  && [lindex $args 0] != "-re" } {
+	set gtimeout [lindex $args 0];
+	set expcode [list [lindex $args 1]];
+    } else {
+	upvar timeout timeout;
+
+	set expcode $args;
+	if [target_info exists gdb,timeout] {
+	    if [info exists timeout] {
+		if { $timeout < [target_info gdb,timeout] } {
+		    set gtimeout [target_info gdb,timeout];
+		} else {
+		    set gtimeout $timeout;
+		}
+	    } else {
+		set gtimeout [target_info gdb,timeout];
+	    }
+	}
+
+	if ![info exists gtimeout] {
+	    global timeout;
+	    if [info exists timeout] {
+		set gtimeout $timeout;
+	    } else {
+		# Eeeeew.
+		set gtimeout 60;
+	    }
+	}
+    }
+    global suppress_flag;
+    global remote_suppress_flag;
+    if [info exists remote_suppress_flag] {
+	set old_val $remote_suppress_flag;
+    }
+    if [info exists suppress_flag] {
+	if { $suppress_flag } {
+	    set remote_suppress_flag 1;
+	}
+    }
+    set code [catch {uplevel remote_expect host $gtimeout $expcode} string];
+    if [info exists old_val] {
+	set remote_suppress_flag $old_val;
+    } else {
+	if [info exists remote_suppress_flag] {
+	    unset remote_suppress_flag;
+	}
+    }
+
+    if {$code == 1} {
+        global errorInfo errorCode;
+
+	return -code error -errorinfo $errorInfo -errorcode $errorCode $string
+    } elseif {$code == 2} {
+	return -code return $string
+    } elseif {$code == 3} {
+	return
+    } elseif {$code > 4} {
+	return -code $code $string
+    }
+}
+
+proc gdb_suppress_entire_file { reason } {
+    global suppress_flag;
+
+    warning "$reason\n";
+    set suppress_flag -1;
+}
+
+#
+# Set suppress_flag, which will cause all subsequent calls to send_gdb and
+# gdb_expect to fail immediately (until the next call to 
+# gdb_stop_suppressing_tests).
+#
+proc gdb_suppress_tests { args } {
+    global suppress_flag;
+
+    return;  # fnf - disable pending review of results where
+             # testsuite ran better without this
+    incr suppress_flag;
+
+    if { $suppress_flag == 1 } {
+	if { [llength $args] > 0 } {
+	    warning "[lindex $args 0]\n";
+	} else {
+	    warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n";
+	}
+    }
+}
+
+#
+# Clear suppress_flag.
+#
+proc gdb_stop_suppressing_tests { } {
+    global suppress_flag;
+
+    if [info exists suppress_flag] {
+	if { $suppress_flag > 0 } {
+	    set suppress_flag 0;
+	    clone_output "Tests restarted.\n";
+	}
+    } else {
+	set suppress_flag 0;
+    }
+}
+
+proc gdb_clear_suppressed { } {
+    global suppress_flag;
+
+    set suppress_flag 0;
+}
+
+proc gdb_start { } {
+    default_gdb_start
+}
+
+proc gdb_exit { } {
+    catch default_gdb_exit
+}
+
+#
+# gdb_load -- load a file into the debugger.
+#             return a -1 if anything goes wrong.
+#
+proc gdb_load { arg } {
+    return [gdb_file_cmd $arg]
+}
+
+proc gdb_continue { function } {
+    global decimal
+
+    return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
+}
+
+proc default_gdb_init { args } {
+    gdb_clear_suppressed;
+
+    # Uh, this is lame. Really, really, really lame. But there's this *one*
+    # testcase that will fail in random places if we don't increase this.
+    match_max -d 20000
+
+    # We want to add the name of the TCL testcase to the PASS/FAIL messages.
+    if { [llength $args] > 0 } {
+	global pf_prefix
+
+	set file [lindex $args 0];
+
+	set pf_prefix "[file tail [file dirname $file]]/[file tail $file]:";
+    }
+    global gdb_prompt;
+    if [target_info exists gdb_prompt] {
+	set gdb_prompt [target_info gdb_prompt];
+    } else {
+	set gdb_prompt "\\(gdb\\)"
+    }
+}
+
+proc gdb_init { args } {
+    return [eval default_gdb_init $args];
+}
+
+proc gdb_finish { } {
+    gdb_exit;
+}
+
+global debug_format
+
+# Run the gdb command "info source" and extract the debugging format
+# information from the output and save it in debug_format.
+
+proc get_debug_format { } {
+    global gdb_prompt
+    global verbose
+    global expect_out
+    global debug_format
+
+    set debug_format "unknown"
+    send_gdb "info source\n"
+    gdb_expect 10 {
+	-re "Compiled with (.*) debugging format.\r\n$gdb_prompt $" {
+	    set debug_format $expect_out(1,string)
+	    verbose "debug format is $debug_format"
+	    return 1;
+	}
+	-re "No current source file.\r\n$gdb_prompt $" {
+	    perror "get_debug_format used when no current source file"
+	    return 0;
+	}
+	-re "$gdb_prompt $" {
+	    warning "couldn't check debug format (no valid response)."
+	    return 1;
+	}
+	timeout {
+	    warning "couldn't check debug format (timed out)."
+	    return 1;
+	}
+    }
+}
+
+# Like setup_xfail, but takes the name of a debug format (DWARF 1,
+# COFF, stabs, etc).  If that format matches the format that the
+# current test was compiled with, then the next test is expected to
+# fail for any target.  Returns 1 if the next test or set of tests is
+# expected to fail, 0 otherwise (or if it is unknown).  Must have
+# previously called get_debug_format.
+
+proc setup_xfail_format { format } {
+    global debug_format
+
+    if [string match $debug_format $format] then {
+	setup_xfail "*-*-*"
+	return 1;
+    }
+    return 0
+}    
+
+proc gdb_step_for_stub { } {
+    global gdb_prompt;
+
+    if ![target_info exists gdb,use_breakpoint_for_stub] {
+	if [target_info exists gdb_stub_step_command] {
+	    set command [target_info gdb_stub_step_command];
+	} else {
+	    set command "step";
+	}
+	send_gdb "${command}\n";
+	set tries 0;
+	gdb_expect 60 {
+	    -re "(main.* at |.*in .*start).*$gdb_prompt" {
+		return;
+	    }
+	    -re ".*$gdb_prompt" {
+		incr tries;
+		if { $tries == 5 } {
+		    fail "stepping out of breakpoint function";
+		    return;
+		}
+		send_gdb "${command}\n";
+		exp_continue;
+	    }
+	    default {
+		fail "stepping out of breakpoint function";
+		return;
+	    }
+	}
+    }
+    send_gdb "where\n";
+    gdb_expect {
+	-re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
+	    set file $expect_out(1,string);
+	    set linenum [expr $expect_out(2,string) + 1];
+	    set breakplace "${file}:${linenum}";
+	}
+	default {}
+    }
+    send_gdb "break ${breakplace}\n";
+    gdb_expect 60 {
+	-re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
+	    set breakpoint $expect_out(1,string);
+	}
+	-re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
+	    set breakpoint $expect_out(1,string);
+	}
+	default {}
+    }
+    send_gdb "continue\n";
+    gdb_expect 60 {
+	-re "Breakpoint ${breakpoint},.*$gdb_prompt" {
+	    gdb_test "delete $breakpoint" ".*" "";
+	    return;
+	}
+	default {}
+    }
+}
+
+### gdb_get_line_number TEXT [FILE]
+###
+### Search the source file FILE, and return the line number of a line
+### containing TEXT.  Use this function instead of hard-coding line
+### numbers into your test script.
+###
+### Specifically, this function uses GDB's "search" command to search
+### FILE for the first line containing TEXT, and returns its line
+### number.  Thus, FILE must be a source file, compiled into the
+### executable you are running.  If omitted, FILE defaults to the
+### value of the global variable `srcfile'; most test scripts set
+### `srcfile' appropriately at the top anyway.
+###
+### Use this function to keep your test scripts independent of the
+### exact line numbering of the source file.  Don't write:
+### 
+###   send_gdb "break 20"
+### 
+### This means that if anyone ever edits your test's source file, 
+### your test could break.  Instead, put a comment like this on the
+### source file line you want to break at:
+### 
+###   /* breakpoint spot: frotz.exp: test name */
+### 
+### and then write, in your test script (which we assume is named
+### frotz.exp):
+### 
+###   send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
+###
+### (Yes, Tcl knows how to handle the nested quotes and brackets.
+### Try this:
+### 	$ tclsh
+### 	% puts "foo [lindex "bar baz" 1]"
+### 	foo baz
+### 	% 
+### Tcl is quite clever, for a little stringy language.)
+
+proc gdb_get_line_number {text {file /omitted/}} {
+    global gdb_prompt;
+    global srcfile;
+
+    if {! [string compare $file /omitted/]} {
+	set file $srcfile
+    }
+
+    set result -1;
+    gdb_test "list ${file}:1,1" ".*" ""
+    send_gdb "search ${text}\n"
+    gdb_expect {
+        -re "\[\r\n\]+(\[0-9\]+)\[ \t\].*${text}.*$gdb_prompt $" {
+            set result $expect_out(1,string)
+        }
+        -re ".*$gdb_prompt $" {
+            fail "find line number containing \"${text}\""
+        }
+        timeout {
+            fail "find line number containing \"${text}\" (timeout)"
+        }
+    }
+    return $result;
+}
+
+
diff --git a/gdb/testsuite/lib/trace-support.exp b/gdb/testsuite/lib/trace-support.exp
new file mode 100644
index 0000000..4765791
--- /dev/null
+++ b/gdb/testsuite/lib/trace-support.exp
@@ -0,0 +1,307 @@
+# Copyright (C) 1998 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
+
+# Please email any bugs, comments, and/or additions to this file to:
+# bug-gdb@prep.ai.mit.edu
+
+
+#
+# Support procedures for trace testing
+#
+
+
+#
+# Procedure: gdb_target_supports_trace
+# Returns true if GDB is connected to a target that supports tracing.
+# Allows tests to abort early if not running on a trace-aware target.
+#
+
+proc gdb_target_supports_trace { } {
+    global gdb_prompt
+
+    send_gdb "tstatus\n"
+    gdb_expect {
+	-re "\[Tt\]race can only be run on.*$gdb_prompt $" {
+	    return 0
+	}
+	-re "\[Tt\]race can not be run on.*$gdb_prompt $" {
+	    return 0
+	}
+	-re "\[Tt\]arget does not support.*$gdb_prompt $" {
+	    return 0
+	}
+	-re ".*\[Ee\]rror.*$gdb_prompt $" {
+	    return 0
+	}
+	-re ".*\[Ww\]arning.*$gdb_prompt $" {
+	    return 0
+	}
+	-re ".*$gdb_prompt $" {
+	    return 1
+	}
+	timeout {
+	    return 0
+	}
+    }
+}
+
+
+#
+# Procedure: gdb_delete_tracepoints
+# Many of the tests depend on setting tracepoints at various places and
+# running until that tracepoint is reached.  At times, we want to start
+# with a clean slate with respect to tracepoints, so this utility proc 
+# lets us do this without duplicating this code everywhere.
+#
+
+proc gdb_delete_tracepoints {} {
+    global gdb_prompt
+
+    send_gdb "delete tracepoints\n"
+    gdb_expect 30 {
+	-re "Delete all tracepoints.*y or n.*$" {
+	    send_gdb "y\n";
+	    exp_continue
+	}
+	-re ".*$gdb_prompt $" { # This happens if there were no tracepoints }
+	timeout { 
+	    perror "Delete all tracepoints in delete_tracepoints (timeout)" 
+	    return 
+	}
+    }
+    send_gdb "info tracepoints\n"
+    gdb_expect 30 {
+	 -re "No tracepoints.*$gdb_prompt $" {}
+	 -re "$gdb_prompt $" { perror "tracepoints not deleted" ; return }
+	 timeout { perror "info tracepoints (timeout)" ; return }
+    }
+}
+
+#
+# Procedure: gdb_trace_setactions
+#   Define actions for a tracepoint.
+#   Arguments:
+#	testname   -- identifying string for pass/fail output
+#	tracepoint -- to which tracepoint do these actions apply? (optional)
+#	args       -- list of actions to be defined.
+#   Returns:
+#	zero       -- success
+#	non-zero   -- failure
+
+proc gdb_trace_setactions { testname tracepoint args } {
+    global gdb_prompt;
+
+    set state 0;
+    set passfail "pass";
+    send_gdb "actions $tracepoint\n";
+    set expected_result "";
+    gdb_expect 5 {
+	-re "No tracepoint number .*$gdb_prompt $" {
+	    fail $testname
+	    return 1;
+	}
+	-re "Enter actions for tracepoint $tracepoint.*>" {
+	    if { [llength $args] > 0 } {
+		set lastcommand "[lindex $args $state]";
+		send_gdb "[lindex $args $state]\n";
+		incr state;
+		set expected_result [lindex $args $state];
+		incr state;
+	    } else {
+		send_gdb "end\n";
+	    }
+	    exp_continue;
+	}
+	-re "\(.*\)\[\r\n\]+\[ \t]*> $" {
+	    if { $expected_result != "" } {
+		regsub "^\[^\r\n\]+\[\r\n\]+" "$expect_out(1,string)" "" out;
+		if ![regexp $expected_result $out] {
+		    set passfail "fail";
+		}
+		set expected_result "";
+	    }
+	    if { $state < [llength $args] } {
+		send_gdb "[lindex $args $state]\n";
+		incr state;
+		set expected_result [lindex $args $state];
+		incr state;
+	    } else {
+		send_gdb "end\n";
+		set expected_result "";
+	    }
+	    exp_continue;
+	}
+	-re "\(.*\)$gdb_prompt $" {
+	    if { $expected_result != "" } {
+		if ![regexp $expected_result $expect_out(1,string)] {
+		    set passfail "fail";
+		}
+		set expected_result "";
+	    }
+	    if { [llength $args] < $state } {
+		set passfail "fail";
+	    }
+	}
+	default {
+	    set passfail "fail";
+	}
+    }
+    if { $testname != "" } {
+	$passfail $testname;
+    }
+    if { $passfail == "pass" } then { 
+	return 0;
+    } else {
+	return 1;
+    }
+}
+
+#
+# Procedure: gdb_tfind_test
+#   Find a specified trace frame.
+#   Arguments: 
+#	testname   -- identifying string for pass/fail output
+#	tfind_arg  -- frame (line, PC, etc.) identifier
+#	exp_res    -- Expected result of frame test
+#	args       -- Test expression
+#   Returns:
+#	zero       -- success
+#	non-zero   -- failure
+#
+
+proc gdb_tfind_test { testname tfind_arg exp_res args } {
+    global gdb_prompt;
+
+    if { "$args" != "" } {
+	set expr "$exp_res";
+	set exp_res "$args";
+    } else {
+	set expr "(int) \$trace_frame";
+    }
+    set passfail "fail";
+
+    gdb_test "tfind $tfind_arg" "" ""
+    send_gdb "printf \"x \%d x\\n\", $expr\n";
+    gdb_expect 10 {
+	-re "x (-*\[0-9\]+) x" {
+	    if { $expect_out(1,string) == $exp_res } {
+		set passfail "pass";
+	    }
+	    exp_continue;
+	}
+	-re "$gdb_prompt $" { }
+    }
+    $passfail "$testname";
+    if { $passfail == "pass" } then { 
+	return 0;
+    } else {
+	return 1;
+    }
+}
+
+#
+# Procedure: gdb_readexpr
+#   Arguments:
+#	gdb_expr    -- the expression whose value is desired
+#   Returns:
+#	the value of gdb_expr, as evaluated by gdb.
+#       [FIXME: returns -1 on error, which is sometimes a legit value]
+#
+
+proc gdb_readexpr { gdb_expr } {
+    global gdb_prompt;
+
+    set result -1;
+    send_gdb "print $gdb_expr\n"
+    gdb_expect 5 {
+	-re "\[$\].*= (\[0-9\]+).*$gdb_prompt $" {
+	    set result $expect_out(1,string);
+	}
+	-re "$gdb_prompt $" { }
+	default { }
+    }
+    return $result;
+}
+
+#
+# Procedure: gdb_gettpnum
+#   Arguments:
+#	tracepoint (optional): if supplied, set a tracepoint here.
+#   Returns:
+#	the tracepoint ID of the most recently set tracepoint.
+#
+
+proc gdb_gettpnum { tracepoint } {
+    global gdb_prompt;
+
+    if { $tracepoint != "" } {
+	gdb_test "trace $tracepoint" "" ""
+    }
+    return [gdb_readexpr "\$tpnum"];
+}
+
+
+#
+# Procedure: gdb_find_function_baseline
+#   Arguments:
+#	func_name -- name of source function
+#   Returns:
+#	Sourcefile line of function definition (open curly brace),
+#	or -1 on failure.  Caller must check return value.
+#   Note:
+#	Works only for open curly brace at beginning of source line!
+#
+
+proc gdb_find_function_baseline { func_name } {
+    global gdb_prompt;
+
+    set baseline -1;
+
+    send_gdb "list $func_name\n"
+#    gdb_expect {
+#	-re "\[\r\n\]\[\{\].*$gdb_prompt $" {
+#	    set baseline 1
+#        }
+#    }
+}
+
+#
+# Procedure: gdb_find_function_baseline
+#   Arguments:
+#	filename: name of source file of desired function.
+#   Returns:
+#	Sourcefile line of function definition (open curly brace),
+#	or -1 on failure.  Caller must check return value.
+#   Note:
+#	Works only for open curly brace at beginning of source line!
+#
+
+proc gdb_find_recursion_test_baseline { filename } {
+    global gdb_prompt;
+
+    set baseline -1;
+
+    gdb_test "list $filename:1" "" ""
+    send_gdb "search gdb_recursion_test line 0\n"
+    gdb_expect {
+	-re "(\[0-9\]+)\[\t \]+\{.*line 0.*$gdb_prompt $" {
+	    set baseline $expect_out(1,string);
+	}
+	-re "$gdb_prompt $" { }
+	default { }
+    }
+    return $baseline;
+}
diff --git a/gdb/thread.c b/gdb/thread.c
new file mode 100644
index 0000000..6a7ab09
--- /dev/null
+++ b/gdb/thread.c
@@ -0,0 +1,721 @@
+/* Multi-process/thread control for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1988, 1993, 1998
+
+   Contributed by Lynx Real-Time Systems, Inc.  Los Gatos, CA.
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "frame.h"
+#include "inferior.h"
+#include "environ.h"
+#include "value.h"
+#include "target.h"
+#include "gdbthread.h"
+#include "command.h"
+#include "gdbcmd.h"
+
+#include <ctype.h>
+#include <sys/types.h>
+#include <signal.h>
+
+/*#include "lynxos-core.h"*/
+
+struct thread_info
+{
+  struct thread_info *next;
+  int pid;			/* Actual process id */
+  int num;			/* Convenient handle */
+  CORE_ADDR prev_pc;		/* State from wait_for_inferior */
+  CORE_ADDR prev_func_start;
+  char *prev_func_name;
+  struct breakpoint *step_resume_breakpoint;
+  struct breakpoint *through_sigtramp_breakpoint;
+  CORE_ADDR step_range_start;
+  CORE_ADDR step_range_end;
+  CORE_ADDR step_frame_address;
+  int trap_expected;
+  int handling_longjmp;
+  int another_trap;
+
+  /* This is set TRUE when a catchpoint of a shared library event
+     triggers.  Since we don't wish to leave the inferior in the
+     solib hook when we report the event, we step the inferior
+     back to user code before stopping and reporting the event.
+     */
+  int  stepping_through_solib_after_catch;
+
+  /* When stepping_through_solib_after_catch is TRUE, this is a
+     list of the catchpoints that should be reported as triggering
+     when we finally do stop stepping.
+     */
+  bpstat  stepping_through_solib_catchpoints;
+
+  /* This is set to TRUE when this thread is in a signal handler
+     trampoline and we're single-stepping through it */
+  int stepping_through_sigtramp;
+
+};
+
+/* Prototypes for exported functions. */
+
+void _initialize_thread PARAMS ((void));
+
+/* Prototypes for local functions. */
+
+#if !defined(FIND_NEW_THREADS)
+#define FIND_NEW_THREADS target_find_new_threads
+#endif  
+			   
+static struct thread_info *thread_list = NULL;
+static int highest_thread_num;
+
+static struct thread_info * find_thread_id PARAMS ((int num));
+
+static void thread_command PARAMS ((char * tidstr, int from_tty));
+static void thread_apply_all_command PARAMS ((char *, int));
+static int  thread_alive PARAMS ((struct thread_info *));
+static void info_threads_command PARAMS ((char *, int));
+static void thread_apply_command PARAMS ((char *, int));
+static void restore_current_thread PARAMS ((int));
+static void switch_to_thread PARAMS ((int pid));
+static void prune_threads PARAMS ((void));
+
+/* If the host has threads, the host machine definition may set this
+   macro. But, for remote thread debugging, it gets more complex and
+   setting macros does not bind to the various target dependent
+   methods well. So, we use the vector target_thread_functions */
+
+static struct target_thread_vector *target_thread_functions;
+
+int
+target_find_new_threads ()
+{
+  int retval = 0;
+  if (target_thread_functions &&
+      target_thread_functions->find_new_threads)
+    retval = (*(target_thread_functions->find_new_threads)) ();
+  return retval;		/* no support */
+}
+
+
+int
+target_get_thread_info PARAMS ((gdb_threadref * ref,
+				int selection,		/* FIXME: Selection */
+				struct gdb_ext_thread_info * info));
+
+int
+target_get_thread_info (ref, selection, info)
+
+     gdb_threadref *ref;
+     int selection;
+    /* FIXME: Selection */
+     struct gdb_ext_thread_info *info;
+
+{
+  int retval = 0;
+  if (target_thread_functions
+      && target_thread_functions->get_thread_info)
+    retval = (*(target_thread_functions->get_thread_info)) (ref, selection, info);
+  return retval;
+}
+
+
+/* It is possible that these bind and unbinf functions implement a
+   stack the interface allows it, but its not implemented that way
+ */
+
+
+void
+bind_target_thread_vector (vec)
+     struct target_thread_vector *vec;
+{
+  target_thread_functions = vec;
+}
+
+struct target_thread_vector *
+unbind_target_thread_vector ()
+{
+  struct target_thread_vector *retval;
+  retval = target_thread_functions;
+  target_thread_functions = 0;
+  return retval;
+}				/* unbind_target_thread-vector */
+
+void
+init_thread_list ()
+{
+  struct thread_info *tp, *tpnext;
+
+  if (!thread_list)
+    return;
+
+  for (tp = thread_list; tp; tp = tpnext)
+    {
+      tpnext = tp->next;
+      free (tp);
+    }
+
+  thread_list = NULL;
+  highest_thread_num = 0;
+}
+
+void
+add_thread (pid)
+     int pid;
+{
+  struct thread_info *tp;
+
+  tp = (struct thread_info *) xmalloc (sizeof (struct thread_info));
+
+  tp->pid = pid;
+  tp->num = ++highest_thread_num;
+  tp->prev_pc = 0;
+  tp->prev_func_start = 0;
+  tp->prev_func_name = NULL;
+  tp->step_range_start = 0;
+  tp->step_range_end = 0;
+  tp->step_frame_address =0;
+  tp->step_resume_breakpoint = 0;
+  tp->through_sigtramp_breakpoint = 0;
+  tp->handling_longjmp = 0;
+  tp->trap_expected = 0;
+  tp->another_trap = 0;
+  tp->stepping_through_solib_after_catch = 0;
+  tp->stepping_through_solib_catchpoints = NULL;
+  tp->stepping_through_sigtramp = 0;
+  tp->next = thread_list;
+  thread_list = tp;
+}
+
+void
+delete_thread (pid)
+     int pid;
+{
+  struct thread_info *tp, *tpprev;
+
+  tpprev = NULL;
+
+  for (tp = thread_list; tp; tpprev = tp, tp = tp->next)
+    if (tp->pid == pid)
+      break;
+
+  if (!tp)
+    return;
+
+  if (tpprev)
+    tpprev->next = tp->next;
+  else
+    thread_list = tp->next;
+
+  free (tp);
+
+  return;
+}
+
+static struct thread_info *
+find_thread_id (num)
+    int num;
+{
+  struct thread_info *tp;
+
+  for (tp = thread_list; tp; tp = tp->next)
+    if (tp->num == num)
+      return tp;
+
+  return NULL;
+}
+
+int
+valid_thread_id (num)
+    int num;
+{
+  struct thread_info *tp;
+
+  for (tp = thread_list; tp; tp = tp->next)
+    if (tp->num == num)
+      return 1;
+
+  return 0;
+}
+
+int
+pid_to_thread_id (pid)
+    int pid;
+{
+  struct thread_info *tp;
+
+  for (tp = thread_list; tp; tp = tp->next)
+    if (tp->pid == pid)
+      return tp->num;
+
+  return 0;
+}
+
+int
+thread_id_to_pid (num)
+    int num;
+{
+  struct thread_info *thread = find_thread_id (num);
+  if (thread)
+    return thread->pid;
+  else
+    return -1;
+}
+
+int
+in_thread_list (pid)
+    int pid;
+{
+  struct thread_info *tp;
+
+  for (tp = thread_list; tp; tp = tp->next)
+    if (tp->pid == pid)
+      return 1;
+
+  return 0;			/* Never heard of 'im */
+}
+
+/* Load infrun state for the thread PID.  */
+
+void load_infrun_state (pid, prev_pc, prev_func_start, prev_func_name,
+			trap_expected, step_resume_breakpoint,
+			through_sigtramp_breakpoint, step_range_start,
+			step_range_end, step_frame_address,
+			handling_longjmp, another_trap,
+			stepping_through_solib_after_catch,
+			stepping_through_solib_catchpoints,
+			stepping_through_sigtramp)
+     int pid;
+     CORE_ADDR *prev_pc;
+     CORE_ADDR *prev_func_start;
+     char **prev_func_name;
+     int *trap_expected;
+     struct breakpoint **step_resume_breakpoint;
+     struct breakpoint **through_sigtramp_breakpoint;
+     CORE_ADDR *step_range_start;
+     CORE_ADDR *step_range_end;
+     CORE_ADDR *step_frame_address;
+     int *handling_longjmp;
+     int *another_trap;
+     int *  stepping_through_solib_after_catch;
+     bpstat *  stepping_through_solib_catchpoints;
+     int *  stepping_through_sigtramp;
+{
+  struct thread_info *tp;
+
+  /* If we can't find the thread, then we're debugging a single threaded
+     process.  No need to do anything in that case.  */
+  tp = find_thread_id (pid_to_thread_id (pid));
+  if (tp == NULL)
+    return;
+
+  *prev_pc = tp->prev_pc;
+  *prev_func_start = tp->prev_func_start;
+  *prev_func_name = tp->prev_func_name;
+  *step_resume_breakpoint = tp->step_resume_breakpoint;
+  *step_range_start = tp->step_range_start;
+  *step_range_end = tp->step_range_end;
+  *step_frame_address = tp->step_frame_address;
+  *through_sigtramp_breakpoint = tp->through_sigtramp_breakpoint;
+  *handling_longjmp = tp->handling_longjmp;
+  *trap_expected = tp->trap_expected;
+  *another_trap = tp->another_trap;
+  *stepping_through_solib_after_catch = tp->stepping_through_solib_after_catch;
+  *stepping_through_solib_catchpoints = tp->stepping_through_solib_catchpoints;
+  *stepping_through_sigtramp = tp->stepping_through_sigtramp;
+}
+
+/* Save infrun state for the thread PID.  */
+
+void save_infrun_state (pid, prev_pc, prev_func_start, prev_func_name,
+			trap_expected, step_resume_breakpoint,
+			through_sigtramp_breakpoint, step_range_start,
+			step_range_end, step_frame_address,
+			handling_longjmp, another_trap,
+			stepping_through_solib_after_catch,
+			stepping_through_solib_catchpoints,
+			stepping_through_sigtramp)
+     int pid;
+     CORE_ADDR prev_pc;
+     CORE_ADDR prev_func_start;
+     char *prev_func_name;
+     int trap_expected;
+     struct breakpoint *step_resume_breakpoint;
+     struct breakpoint *through_sigtramp_breakpoint;
+     CORE_ADDR step_range_start;
+     CORE_ADDR step_range_end;
+     CORE_ADDR step_frame_address;
+     int handling_longjmp;
+     int another_trap;
+     int  stepping_through_solib_after_catch;
+     bpstat  stepping_through_solib_catchpoints;
+     int  stepping_through_sigtramp;
+{
+  struct thread_info *tp;
+
+  /* If we can't find the thread, then we're debugging a single-threaded
+     process.  Nothing to do in that case.  */
+  tp = find_thread_id (pid_to_thread_id (pid));
+  if (tp == NULL)
+    return;
+
+  tp->prev_pc = prev_pc;
+  tp->prev_func_start = prev_func_start;
+  tp->prev_func_name = prev_func_name;
+  tp->step_resume_breakpoint = step_resume_breakpoint;
+  tp->step_range_start = step_range_start;
+  tp->step_range_end = step_range_end;
+  tp->step_frame_address = step_frame_address;
+  tp->through_sigtramp_breakpoint = through_sigtramp_breakpoint;
+  tp->handling_longjmp = handling_longjmp;
+  tp->trap_expected = trap_expected;
+  tp->another_trap = another_trap;
+  tp->stepping_through_solib_after_catch = stepping_through_solib_after_catch;
+  tp->stepping_through_solib_catchpoints = stepping_through_solib_catchpoints;
+  tp->stepping_through_sigtramp = stepping_through_sigtramp;
+}
+
+/* Return true if TP is an active thread. */
+static int
+thread_alive (tp)
+     struct thread_info *tp;
+{
+  if (tp->pid == -1)
+    return 0;
+  if (! target_thread_alive (tp->pid))
+    {
+      tp->pid = -1;	/* Mark it as dead */
+      return 0;
+    }
+  return 1;
+}
+
+static void
+prune_threads ()
+{
+  struct thread_info *tp, *tpprev, *next;
+
+  tpprev = 0;
+  for (tp = thread_list; tp; tp = next)
+    {
+      next = tp->next;
+      if (!thread_alive (tp))
+	{
+	  if (tpprev)
+	    tpprev->next = next;
+	  else
+	    thread_list  = next;
+	  free (tp);
+	}
+      else
+	tpprev = tp;
+    }
+}
+
+/* Print information about currently known threads 
+ *
+ * Note: this has the drawback that it _really_ switches
+ *       threads, which frees the frame cache.  A no-side
+ *       effects info-threads command would be nicer.
+ */
+
+static void
+info_threads_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct thread_info *tp;
+  int                current_pid;
+  struct frame_info  *cur_frame;
+  int                saved_frame_level = selected_frame_level;
+  int                counter;
+
+  /* Avoid coredumps which would happen if we tried to access a NULL
+     selected_frame.  */
+  if (!target_has_stack) error ("No stack.");
+
+  prune_threads ();
+#if defined(FIND_NEW_THREADS)
+  FIND_NEW_THREADS ();
+#endif
+  current_pid = inferior_pid;
+  for (tp = thread_list; tp; tp = tp->next)
+    {
+      if (tp->pid == current_pid)
+	printf_filtered ("* ");
+      else
+	printf_filtered ("  ");
+
+#ifdef HPUXHPPA
+      printf_filtered ("%d %s  ", tp->num, target_tid_to_str (tp->pid));
+#else
+      printf_filtered ("%d %s  ", tp->num, target_pid_to_str (tp->pid));
+#endif
+      switch_to_thread (tp->pid);
+      if (selected_frame)
+	print_only_stack_frame (selected_frame, -1, 0);
+      else
+	printf_filtered ("[No stack.]\n");
+    }
+
+  switch_to_thread (current_pid);
+
+  /* Code below copied from "up_silently_base" in "stack.c".
+   * It restores the frame set by the user before the "info threads"
+   * command.  We have finished the info-threads display by switching
+   * back to the current thread.  That switch has put us at the top
+   * of the stack (leaf frame).
+   */
+  counter   = saved_frame_level;
+  cur_frame = find_relative_frame(selected_frame, &counter);
+  if (counter != 0)
+    {
+      /* Ooops, can't restore, tell user where we are. */
+      warning ("Couldn't restore frame in current thread, at frame 0");
+      print_stack_frame (selected_frame, -1, 0);
+    }
+  else
+    {
+      select_frame(cur_frame, saved_frame_level);
+    }
+
+  /* re-show current frame. */
+  show_stack_frame(cur_frame);
+}
+
+/* Switch from one thread to another. */
+
+static void
+switch_to_thread (pid)
+     int pid;
+{
+  if (pid == inferior_pid)
+    return;
+
+  inferior_pid = pid;
+  flush_cached_frames ();
+  registers_changed ();
+  stop_pc = read_pc();
+  select_frame (get_current_frame (), 0);
+}
+
+static void
+restore_current_thread (pid)
+     int pid;
+{
+  if (pid != inferior_pid) 
+    {
+      switch_to_thread (pid);
+      print_stack_frame( get_current_frame(), 0, -1);
+    }
+}
+
+/* Apply a GDB command to a list of threads.  List syntax is a whitespace
+   seperated list of numbers, or ranges, or the keyword `all'.  Ranges consist
+   of two numbers seperated by a hyphen.  Examples:
+
+	thread apply 1 2 7 4 backtrace	Apply backtrace cmd to threads 1,2,7,4
+	thread apply 2-7 9 p foo(1)	Apply p foo(1) cmd to threads 2->7 & 9
+	thread apply all p x/i $pc	Apply x/i $pc cmd to all threads
+*/
+
+static void
+thread_apply_all_command (cmd, from_tty)
+     char *cmd;
+     int from_tty;
+{
+  struct thread_info *tp;
+  struct cleanup *old_chain;
+
+  if (cmd == NULL || *cmd == '\000')
+    error ("Please specify a command following the thread ID list");
+
+  old_chain = make_cleanup ((make_cleanup_func) restore_current_thread, 
+			    (void *) inferior_pid);
+
+  for (tp = thread_list; tp; tp = tp->next)
+    if (thread_alive (tp))
+      {
+	switch_to_thread (tp->pid);
+#ifdef HPUXHPPA
+	printf_filtered ("\nThread %d (%s):\n",
+			 tp->num,
+			 target_tid_to_str (inferior_pid));
+#else
+	printf_filtered ("\nThread %d (%s):\n", tp->num,
+			 target_pid_to_str (inferior_pid));
+#endif
+	execute_command (cmd, from_tty);
+      }
+}
+
+static void
+thread_apply_command (tidlist, from_tty)
+     char *tidlist;
+     int from_tty;
+{
+  char *cmd;
+  char *p;
+  struct cleanup *old_chain;
+
+  if (tidlist == NULL || *tidlist == '\000')
+    error ("Please specify a thread ID list");
+
+  for (cmd = tidlist; *cmd != '\000' && !isalpha(*cmd); cmd++);
+
+  if (*cmd == '\000')
+    error ("Please specify a command following the thread ID list");
+
+  old_chain = make_cleanup ((make_cleanup_func) restore_current_thread, 
+			    (void *) inferior_pid);
+
+  while (tidlist < cmd)
+    {
+      struct thread_info *tp;
+      int start, end;
+
+      start = strtol (tidlist, &p, 10);
+      if (p == tidlist)
+	error ("Error parsing %s", tidlist);
+      tidlist = p;
+
+      while (*tidlist == ' ' || *tidlist == '\t')
+	tidlist++;
+
+      if (*tidlist == '-')	/* Got a range of IDs? */
+	{
+	  tidlist++;	/* Skip the - */
+	  end = strtol (tidlist, &p, 10);
+	  if (p == tidlist)
+	    error ("Error parsing %s", tidlist);
+	  tidlist = p;
+
+	  while (*tidlist == ' ' || *tidlist == '\t')
+	    tidlist++;
+	}
+      else
+	end = start;
+
+      for (; start <= end; start++)
+	{
+	  tp = find_thread_id (start);
+
+	  if (!tp)
+	    warning ("Unknown thread %d.", start);
+	  else if (!thread_alive (tp))
+	    warning ("Thread %d has terminated.", start);
+	  else
+	    {
+	      switch_to_thread (tp->pid);
+#ifdef HPUXHPPA
+	      printf_filtered ("\nThread %d (%s):\n", tp->num,
+			       target_tid_to_str (inferior_pid));
+#else
+	      printf_filtered ("\nThread %d (%s):\n", tp->num,
+			       target_pid_to_str (inferior_pid));
+#endif
+	      execute_command (cmd, from_tty);
+	    }
+	}
+    }
+}
+
+/* Switch to the specified thread.  Will dispatch off to thread_apply_command
+   if prefix of arg is `apply'.  */
+
+static void
+thread_command (tidstr, from_tty)
+     char *tidstr;
+     int from_tty;
+{
+  int num;
+  struct thread_info *tp;
+
+  if (!tidstr)
+    {
+      /* Don't generate an error, just say which thread is current. */
+      if (target_has_stack)
+	printf_filtered ("[Current thread is %d (%s)]\n",
+			 pid_to_thread_id(inferior_pid),
+#if defined(HPUXHPPA)
+			 target_tid_to_str(inferior_pid)
+#else
+			 target_pid_to_str(inferior_pid)
+#endif
+			 );
+      else
+	error ("No stack.");
+      return;
+    }
+  num = atoi (tidstr);
+
+  tp = find_thread_id (num);
+
+  if (!tp)
+    error ("Thread ID %d not known.  Use the \"info threads\" command to\n\
+see the IDs of currently known threads.", num);
+
+  if (!thread_alive (tp))
+    error ("Thread ID %d has terminated.\n", num);
+
+  switch_to_thread (tp->pid);
+
+  if (context_hook)
+    context_hook (num);
+
+  printf_filtered ("[Switching to thread %d (%s)]\n",
+		   pid_to_thread_id (inferior_pid),
+#if defined(HPUXHPPA)
+		   target_tid_to_str (inferior_pid)
+#else
+		   target_pid_to_str (inferior_pid)
+#endif
+		   );
+  print_stack_frame (selected_frame, selected_frame_level, 1);
+}
+
+/* Commands with a prefix of `thread'.  */
+struct cmd_list_element *thread_cmd_list = NULL;
+
+void
+_initialize_thread ()
+{
+  static struct cmd_list_element *thread_apply_list = NULL;
+  extern struct cmd_list_element *cmdlist;
+
+  add_info ("threads", info_threads_command,
+	    "IDs of currently known threads.");
+
+  add_prefix_cmd ("thread", class_run, thread_command,
+		  "Use this command to switch between threads.\n\
+The new thread ID must be currently known.", &thread_cmd_list, "thread ", 1,
+		  &cmdlist);
+
+  add_prefix_cmd ("apply", class_run, thread_apply_command,
+		  "Apply a command to a list of threads.",
+		  &thread_apply_list, "apply ", 1, &thread_cmd_list);
+
+  add_cmd ("all", class_run, thread_apply_all_command,
+	   "Apply a command to all threads.",
+	   &thread_apply_list);
+
+  if (!xdb_commands)
+    add_com_alias ("t", "thread", class_run, 1);
+}
diff --git a/gdb/top.c b/gdb/top.c
new file mode 100644
index 0000000..189e3c3
--- /dev/null
+++ b/gdb/top.c
@@ -0,0 +1,3677 @@
+/* Top level stuff for GDB, the GNU debugger.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcmd.h"
+#include "call-cmds.h"
+#include "symtab.h"
+#include "inferior.h"
+#include "signals.h"
+#include "target.h"
+#include "breakpoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "language.h"
+#include "terminal.h" /* For job_control.  */
+#include "annotate.h"
+#include <setjmp.h>
+#include "top.h"
+
+/* readline include files */
+#include <readline/readline.h>
+#include <readline/history.h>
+
+/* readline defines this.  */
+#undef savestring
+
+#include <sys/types.h>
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+
+extern void initialize_utils PARAMS ((void));
+
+/* Prototypes for local functions */
+
+static void dont_repeat_command PARAMS ((char *, int));
+
+static void source_cleanup_lines PARAMS ((PTR));
+
+static void user_defined_command PARAMS ((char *, int));
+
+static void init_signals PARAMS ((void));
+
+#ifdef STOP_SIGNAL
+static void stop_sig PARAMS ((int));
+#endif
+
+static char * line_completion_function PARAMS ((char *, int, char *, int));
+
+static char * readline_line_completion_function PARAMS ((char *, int));
+
+static void command_loop_marker PARAMS ((int));
+
+static void while_command PARAMS ((char *, int));
+
+static void if_command PARAMS ((char *, int));
+
+static struct command_line *
+build_command_line PARAMS ((enum command_control_type, char *));
+
+static struct command_line *
+get_command_line PARAMS ((enum command_control_type, char *));
+
+static void realloc_body_list PARAMS ((struct command_line *, int));
+
+static enum misc_command_type read_next_line PARAMS ((struct command_line **));
+
+static enum command_control_type
+recurse_read_control_structure PARAMS ((struct command_line *));
+
+static struct cleanup * setup_user_args PARAMS ((char *));
+
+static char * locate_arg PARAMS ((char *));
+
+static char * insert_args PARAMS ((char *));
+
+static void arg_cleanup PARAMS ((void));
+
+static void init_main PARAMS ((void));
+
+static void init_cmd_lists PARAMS ((void));
+
+static void float_handler PARAMS ((int));
+
+static void init_signals PARAMS ((void));
+
+static void set_verbose PARAMS ((char *, int, struct cmd_list_element *));
+
+static void show_history PARAMS ((char *, int));
+
+static void set_history PARAMS ((char *, int));
+
+static void set_history_size_command PARAMS ((char *, int,
+					      struct cmd_list_element *));
+
+static void show_commands PARAMS ((char *, int));
+
+static void echo_command PARAMS ((char *, int));
+
+static void pwd_command PARAMS ((char *, int));
+
+static void show_version PARAMS ((char *, int));
+
+static void document_command PARAMS ((char *, int));
+
+static void define_command PARAMS ((char *, int));
+
+static void validate_comname PARAMS ((char *));
+
+static void help_command PARAMS ((char *, int));
+
+static void show_command PARAMS ((char *, int));
+
+static void info_command PARAMS ((char *, int));
+
+static void complete_command PARAMS ((char *, int));
+
+static void do_nothing PARAMS ((int));
+
+#ifdef SIGHUP
+static int quit_cover PARAMS ((PTR));
+
+static void disconnect PARAMS ((int));
+#endif
+
+static void source_cleanup PARAMS ((FILE *));
+
+/* If this definition isn't overridden by the header files, assume
+   that isatty and fileno exist on this system.  */
+#ifndef ISATTY
+#define ISATTY(FP)	(isatty (fileno (FP)))
+#endif
+
+/* Initialization file name for gdb.  This is overridden in some configs.  */
+
+#ifndef	GDBINIT_FILENAME
+#define	GDBINIT_FILENAME	".gdbinit"
+#endif
+char gdbinit[] = GDBINIT_FILENAME;
+
+int inhibit_gdbinit = 0;
+
+/* If nonzero, and GDB has been configured to be able to use windows,
+   attempt to open them upon startup.  */
+
+int use_windows = 1;
+
+/* Version number of GDB, as a string.  */
+
+extern char *version;
+
+/* Canonical host name as a string. */
+
+extern char *host_name;
+
+/* Canonical target name as a string. */
+
+extern char *target_name;
+
+extern char lang_frame_mismatch_warn[];		/* language.c */
+
+/* Flag for whether we want all the "from_tty" gubbish printed.  */
+
+int caution = 1;			/* Default is yes, sigh. */
+
+/* Define all cmd_list_elements.  */
+
+/* Chain containing all defined commands.  */
+
+struct cmd_list_element *cmdlist;
+
+/* Chain containing all defined info subcommands.  */
+
+struct cmd_list_element *infolist;
+
+/* Chain containing all defined enable subcommands. */
+
+struct cmd_list_element *enablelist;
+
+/* Chain containing all defined disable subcommands. */
+
+struct cmd_list_element *disablelist;
+
+/* Chain containing all defined toggle subcommands. */
+
+struct cmd_list_element *togglelist;
+
+/* Chain containing all defined stop subcommands. */
+
+struct cmd_list_element *stoplist;
+
+/* Chain containing all defined delete subcommands. */
+
+struct cmd_list_element *deletelist;
+
+/* Chain containing all defined "enable breakpoint" subcommands. */
+
+struct cmd_list_element *enablebreaklist;
+
+/* Chain containing all defined set subcommands */
+
+struct cmd_list_element *setlist;
+
+/* Chain containing all defined unset subcommands */
+
+struct cmd_list_element *unsetlist;
+
+/* Chain containing all defined show subcommands.  */
+
+struct cmd_list_element *showlist;
+
+/* Chain containing all defined \"set history\".  */
+
+struct cmd_list_element *sethistlist;
+
+/* Chain containing all defined \"show history\".  */
+
+struct cmd_list_element *showhistlist;
+
+/* Chain containing all defined \"unset history\".  */
+
+struct cmd_list_element *unsethistlist;
+
+/* Chain containing all defined maintenance subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenancelist;
+#endif
+
+/* Chain containing all defined "maintenance info" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceinfolist;
+#endif
+
+/* Chain containing all defined "maintenance print" subcommands. */
+
+#if MAINTENANCE_CMDS
+struct cmd_list_element *maintenanceprintlist;
+#endif
+
+struct cmd_list_element *setprintlist;
+
+struct cmd_list_element *showprintlist;
+
+struct cmd_list_element *setchecklist;
+
+struct cmd_list_element *showchecklist;
+
+/* stdio stream that command input is being read from.  Set to stdin normally.
+   Set by source_command to the file we are sourcing.  Set to NULL if we are
+   executing a user-defined command or interacting via a GUI.  */
+
+FILE *instream;
+
+/* Current working directory.  */
+
+char *current_directory;
+
+/* The directory name is actually stored here (usually).  */
+char gdb_dirbuf[1024];
+
+/* Function to call before reading a command, if nonzero.
+   The function receives two args: an input stream,
+   and a prompt string.  */
+
+void (*window_hook) PARAMS ((FILE *, char *));
+
+int epoch_interface;
+int xgdb_verbose;
+
+/* gdb prints this when reading a command interactively */
+static char *prompt;
+
+/* Buffer used for reading command lines, and the size
+   allocated for it so far.  */
+
+char *line;
+int linesize = 100;
+
+/* Nonzero if the current command is modified by "server ".  This
+   affects things like recording into the command history, comamnds
+   repeating on RETURN, etc.  This is so a user interface (emacs, GUI,
+   whatever) can issue its own commands and also send along commands
+   from the user, and have the user not notice that the user interface
+   is issuing commands too.  */
+int server_command;
+
+/* Baud rate specified for talking to serial target systems.  Default
+   is left as -1, so targets can choose their own defaults.  */
+/* FIXME: This means that "show remotebaud" and gr_files_info can print -1
+   or (unsigned int)-1.  This is a Bad User Interface.  */
+
+int baud_rate = -1;
+
+/* Timeout limit for response from target. */
+
+int remote_timeout = 20;	/* Set default to 20 */
+
+/* Non-zero tells remote* modules to output debugging info.  */
+
+int remote_debug = 0;
+
+/* Level of control structure.  */
+static int control_level;
+
+/* Structure for arguments to user defined functions.  */
+#define MAXUSERARGS 10
+struct user_args
+{
+  struct user_args *next;
+  struct
+    {
+      char *arg;
+      int len;
+    } a[MAXUSERARGS];
+  int count;
+} *user_args;
+
+/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT.  */
+
+#ifndef STOP_SIGNAL
+#ifdef SIGTSTP
+#define STOP_SIGNAL SIGTSTP
+static void stop_sig PARAMS ((int));
+#endif
+#endif
+
+/* Some System V have job control but not sigsetmask(). */
+#if !defined (HAVE_SIGSETMASK)
+#if !defined (USG)
+#define HAVE_SIGSETMASK 1
+#else
+#define HAVE_SIGSETMASK 0
+#endif
+#endif
+
+#if 0 == (HAVE_SIGSETMASK)
+#define sigsetmask(n)
+#endif
+
+/* Hooks for alternate command interfaces.  */
+
+/* Called after most modules have been initialized, but before taking users
+   command file.  */
+
+void (*init_ui_hook) PARAMS ((char *argv0));
+#ifdef __CYGWIN32__
+void (*ui_loop_hook) PARAMS ((int));
+#endif
+
+/* Called instead of command_loop at top level.  Can be invoked via
+   return_to_top_level.  */
+
+void (*command_loop_hook) PARAMS ((void));
+
+
+/* Called instead of fputs for all output.  */
+
+void (*fputs_unfiltered_hook) PARAMS ((const char *linebuffer, GDB_FILE *stream));
+
+/* Called when the target says something to the host, which may
+   want to appear in a different window. */
+
+void (*target_output_hook) PARAMS ((char *));
+
+/* Called from print_frame_info to list the line we stopped in.  */
+
+void (*print_frame_info_listing_hook) PARAMS ((struct symtab *s, int line,
+					       int stopline, int noerror));
+/* Replaces most of query.  */
+
+int (*query_hook) PARAMS ((const char *, va_list));
+
+/* Replaces most of warning.  */
+
+void (*warning_hook) PARAMS ((const char *, va_list));
+
+/* Called from gdb_flush to flush output.  */
+
+void (*flush_hook) PARAMS ((GDB_FILE *stream));
+
+/* These three functions support getting lines of text from the user.  They
+   are used in sequence.  First readline_begin_hook is called with a text
+   string that might be (for example) a message for the user to type in a
+   sequence of commands to be executed at a breakpoint.  If this function
+   calls back to a GUI, it might take this opportunity to pop up a text
+   interaction window with this message.  Next, readline_hook is called
+   with a prompt that is emitted prior to collecting the user input.
+   It can be called multiple times.  Finally, readline_end_hook is called
+   to notify the GUI that we are done with the interaction window and it
+   can close it. */
+
+void (*readline_begin_hook) PARAMS ((char *, ...));
+char * (*readline_hook) PARAMS ((char *));
+void (*readline_end_hook) PARAMS ((void));
+
+/* Called as appropriate to notify the interface of the specified breakpoint
+   conditions.  */
+
+void (*create_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+void (*delete_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+void (*modify_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+
+/* Called during long calculations to allow GUI to repair window damage, and to
+   check for stop buttons, etc... */
+
+void (*interactive_hook) PARAMS ((void));
+
+/* Called when the registers have changed, as a hint to a GUI
+   to minimize window update. */
+
+void (*registers_changed_hook) PARAMS ((void));
+
+/* Tell the GUI someone changed the register REGNO. -1 means
+   that the caller does not know which register changed or
+   that several registers have changed (see value_assign).*/
+void (*register_changed_hook) PARAMS ((int regno));
+
+/* Tell the GUI someone changed LEN bytes of memory at ADDR */
+void (*memory_changed_hook) PARAMS ((CORE_ADDR addr, int len));
+
+/* Called when going to wait for the target.  Usually allows the GUI to run
+   while waiting for target events.  */
+
+int (*target_wait_hook) PARAMS ((int pid, struct target_waitstatus *status));
+
+/* Used by UI as a wrapper around command execution.  May do various things
+   like enabling/disabling buttons, etc...  */
+
+void (*call_command_hook) PARAMS ((struct cmd_list_element *c, char *cmd,
+				   int from_tty));
+
+/* Called when the current thread changes.  Argument is thread id.  */
+
+void (*context_hook) PARAMS ((int id));
+
+/* Takes control from error ().  Typically used to prevent longjmps out of the
+   middle of the GUI.  Usually used in conjunction with a catch routine.  */
+
+NORETURN void (*error_hook) PARAMS ((void)) ATTR_NORETURN;
+
+
+/* Where to go for return_to_top_level (RETURN_ERROR).  */
+SIGJMP_BUF error_return;
+/* Where to go for return_to_top_level (RETURN_QUIT).  */
+SIGJMP_BUF quit_return;
+
+/* Return for reason REASON.  This generally gets back to the command
+   loop, but can be caught via catch_errors.  */
+
+NORETURN void
+return_to_top_level (reason)
+     enum return_reason reason;
+{
+  quit_flag = 0;
+  immediate_quit = 0;
+
+  /* Perhaps it would be cleaner to do this via the cleanup chain (not sure
+     I can think of a reason why that is vital, though).  */
+  bpstat_clear_actions(stop_bpstat);	/* Clear queued breakpoint commands */
+
+  disable_current_display ();
+  do_cleanups (ALL_CLEANUPS);
+
+  if (annotation_level > 1)
+    switch (reason)
+      {
+      case RETURN_QUIT:
+	annotate_quit ();
+	break;
+      case RETURN_ERROR:
+	annotate_error ();
+	break;
+      }
+
+  (NORETURN void) SIGLONGJMP
+    (reason == RETURN_ERROR ? error_return : quit_return, 1);
+}
+
+/* Call FUNC with arg ARGS, catching any errors.  If there is no
+   error, return the value returned by FUNC.  If there is an error,
+   print ERRSTRING, print the specific error message, then return
+   zero.
+
+   Must not be called with immediate_quit in effect (bad things might
+   happen, say we got a signal in the middle of a memcpy to quit_return).
+   This is an OK restriction; with very few exceptions immediate_quit can
+   be replaced by judicious use of QUIT.
+
+   MASK specifies what to catch; it is normally set to
+   RETURN_MASK_ALL, if for no other reason than that the code which
+   calls catch_errors might not be set up to deal with a quit which
+   isn't caught.  But if the code can deal with it, it generally
+   should be RETURN_MASK_ERROR, unless for some reason it is more
+   useful to abort only the portion of the operation inside the
+   catch_errors.  Note that quit should return to the command line
+   fairly quickly, even if some further processing is being done.  */
+
+int
+catch_errors (func, args, errstring, mask)
+     catch_errors_ftype *func;
+     PTR args;
+     char *errstring;
+     return_mask mask;
+{
+  SIGJMP_BUF saved_error;
+  SIGJMP_BUF saved_quit;
+  SIGJMP_BUF tmp_jmp;
+  int val;
+  struct cleanup *saved_cleanup_chain;
+  char *saved_error_pre_print;
+  char *saved_quit_pre_print;
+
+  saved_cleanup_chain = save_cleanups ();
+  saved_error_pre_print = error_pre_print;
+  saved_quit_pre_print = quit_pre_print;
+
+  if (mask & RETURN_MASK_ERROR)
+    {
+      memcpy ((char *)saved_error, (char *)error_return, sizeof (SIGJMP_BUF));
+      error_pre_print = errstring;
+    }
+  if (mask & RETURN_MASK_QUIT)
+    {
+      memcpy (saved_quit, quit_return, sizeof (SIGJMP_BUF));
+      quit_pre_print = errstring;
+    }
+
+  if (SIGSETJMP (tmp_jmp) == 0)
+    {
+      if (mask & RETURN_MASK_ERROR)
+	memcpy (error_return, tmp_jmp, sizeof (SIGJMP_BUF));
+      if (mask & RETURN_MASK_QUIT)
+	memcpy (quit_return, tmp_jmp, sizeof (SIGJMP_BUF));
+      val = (*func) (args);
+    }
+  else
+    val = 0;
+
+  restore_cleanups (saved_cleanup_chain);
+
+  if (mask & RETURN_MASK_ERROR)
+    {
+      memcpy (error_return, saved_error, sizeof (SIGJMP_BUF));
+      error_pre_print = saved_error_pre_print;
+    }
+  if (mask & RETURN_MASK_QUIT)
+    {
+      memcpy (quit_return, saved_quit, sizeof (SIGJMP_BUF));
+      quit_pre_print = saved_quit_pre_print;
+    }
+  return val;
+}
+
+/* Handler for SIGHUP.  */
+
+#ifdef SIGHUP
+static void
+disconnect (signo)
+int signo;
+{
+  catch_errors (quit_cover, NULL,
+		"Could not kill the program being debugged", RETURN_MASK_ALL);
+  signal (SIGHUP, SIG_DFL);
+  kill (getpid (), SIGHUP);
+}
+
+/* Just a little helper function for disconnect().  */
+
+static int
+quit_cover (s)
+     PTR s;
+{
+  caution = 0;		/* Throw caution to the wind -- we're exiting.
+			   This prevents asking the user dumb questions.  */
+  quit_command((char *)0, 0);
+  return 0;
+}
+#endif /* defined SIGHUP */
+
+/* Line number we are currently in in a file which is being sourced.  */
+static int source_line_number;
+
+/* Name of the file we are sourcing.  */
+static char *source_file_name;
+
+/* Buffer containing the error_pre_print used by the source stuff.
+   Malloc'd.  */
+static char *source_error;
+static int source_error_allocated;
+
+/* Something to glom on to the start of error_pre_print if source_file_name
+   is set.  */
+static char *source_pre_error;
+
+/* Clean up on error during a "source" command (or execution of a
+   user-defined command).  */
+
+static void
+source_cleanup (stream)
+     FILE *stream;
+{
+  /* Restore the previous input stream.  */
+  instream = stream;
+}
+
+/* Read commands from STREAM.  */
+void
+read_command_file (stream)
+     FILE *stream;
+{
+  struct cleanup *cleanups;
+
+  cleanups = make_cleanup ((make_cleanup_func) source_cleanup, instream);
+  instream = stream;
+  command_loop ();
+  do_cleanups (cleanups);
+}
+
+extern void init_proc PARAMS ((void));
+
+void (*pre_init_ui_hook) PARAMS ((void));
+
+void
+gdb_init (argv0)
+     char *argv0;
+{
+  if (pre_init_ui_hook)
+    pre_init_ui_hook ();
+
+  /* Run the init function of each source file */
+
+  getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+  current_directory = gdb_dirbuf;
+
+  init_cmd_lists ();	/* This needs to be done first */
+  initialize_targets (); /* Setup target_terminal macros for utils.c */
+  initialize_utils ();	/* Make errors and warnings possible */
+  initialize_all_files ();
+  init_main ();		/* But that omits this file!  Do it now */
+  init_signals ();
+
+  init_proc ();
+
+  /* We need a default language for parsing expressions, so simple things like
+     "set width 0" won't fail if no language is explicitly set in a config file
+     or implicitly set by reading an executable during startup. */
+  set_language (language_c);
+  expected_language = current_language;	/* don't warn about the change.  */
+
+  if (init_ui_hook)
+    init_ui_hook (argv0);
+}
+
+/* Allocate, initialize a new command line structure for one of the
+   control commands (if/while).  */
+
+static struct command_line *
+build_command_line (type, args)
+     enum command_control_type type;
+     char *args;
+{
+  struct command_line *cmd;
+
+  if (args == NULL)
+    error ("if/while commands require arguments.\n");
+
+  cmd = (struct command_line *)xmalloc (sizeof (struct command_line));
+  cmd->next = NULL;
+  cmd->control_type = type;
+
+  cmd->body_count = 1;
+  cmd->body_list
+    = (struct command_line **)xmalloc (sizeof (struct command_line *)
+				       * cmd->body_count);
+  memset (cmd->body_list, 0, sizeof (struct command_line *) * cmd->body_count);
+  cmd->line = savestring (args, strlen (args));
+  return cmd;
+}
+
+/* Build and return a new command structure for the control commands
+   such as "if" and "while".  */
+
+static struct command_line *
+get_command_line (type, arg)
+     enum command_control_type type;
+     char *arg;
+{
+  struct command_line *cmd;
+  struct cleanup *old_chain = NULL;
+
+  /* Allocate and build a new command line structure.  */
+  cmd = build_command_line (type, arg);
+
+  old_chain = make_cleanup ((make_cleanup_func) free_command_lines, &cmd);
+
+  /* Read in the body of this command.  */
+  if (recurse_read_control_structure (cmd) == invalid_control)
+    {
+      warning ("error reading in control structure\n");
+      do_cleanups (old_chain);
+      return NULL;
+    }
+
+  discard_cleanups (old_chain);
+  return cmd;
+}
+
+/* Recursively print a command (including full control structures).  */
+void
+print_command_line (cmd, depth)
+     struct command_line *cmd;
+     unsigned int depth;
+{
+  unsigned int i;
+
+  if (depth)
+    {
+      for (i = 0; i < depth; i++)
+	fputs_filtered ("  ", gdb_stdout);
+    }
+
+  /* A simple command, print it and return.  */
+  if (cmd->control_type == simple_control)
+    {
+      fputs_filtered (cmd->line, gdb_stdout);
+      fputs_filtered ("\n", gdb_stdout);
+      return;
+    }
+
+  /* loop_continue to jump to the start of a while loop, print it
+     and return. */
+  if (cmd->control_type == continue_control)
+    {
+      fputs_filtered ("loop_continue\n", gdb_stdout);
+      return;
+    }
+
+  /* loop_break to break out of a while loop, print it and return.  */
+  if (cmd->control_type == break_control)
+    {
+      fputs_filtered ("loop_break\n", gdb_stdout);
+      return;
+    }
+
+  /* A while command.  Recursively print its subcommands before returning.  */
+  if (cmd->control_type == while_control)
+    {
+      struct command_line *list;
+      fputs_filtered ("while ", gdb_stdout);
+      fputs_filtered (cmd->line, gdb_stdout);
+      fputs_filtered ("\n", gdb_stdout);
+      list = *cmd->body_list;
+      while (list)
+	{
+	  print_command_line (list, depth + 1);
+	  list = list->next;
+	}
+    }
+
+  /* An if command.  Recursively print both arms before returning.  */
+  if (cmd->control_type == if_control)
+    {
+      fputs_filtered ("if ", gdb_stdout);
+      fputs_filtered (cmd->line, gdb_stdout);
+      fputs_filtered ("\n", gdb_stdout);
+      /* The true arm. */
+      print_command_line (cmd->body_list[0], depth + 1);
+
+      /* Show the false arm if it exists.  */
+      if (cmd->body_count == 2)
+	  {
+	    if (depth)
+	      {
+		for (i = 0; i < depth; i++)
+		  fputs_filtered ("  ", gdb_stdout);
+	      }
+	    fputs_filtered ("else\n", gdb_stdout);
+	    print_command_line (cmd->body_list[1], depth + 1);
+	  }
+      if (depth)
+	{
+	  for (i = 0; i < depth; i++)
+	    fputs_filtered ("  ", gdb_stdout);
+	}
+      fputs_filtered ("end\n", gdb_stdout);
+    }
+}
+
+/* Execute the command in CMD.  */
+
+enum command_control_type
+execute_control_command (cmd)
+     struct command_line *cmd;
+{
+  struct expression *expr;
+  struct command_line *current;
+  struct cleanup *old_chain = 0;
+  value_ptr val;
+  value_ptr val_mark;
+  int loop;
+  enum command_control_type ret;
+  char *new_line;
+
+  switch (cmd->control_type)
+    {
+    case simple_control:
+      /* A simple command, execute it and return.  */
+      new_line = insert_args (cmd->line);
+      if (!new_line)
+	return invalid_control;
+      old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                &new_line);
+      execute_command (new_line, 0);
+      ret = cmd->control_type;
+      break;
+
+    case continue_control:
+    case break_control:
+      /* Return for "continue", and "break" so we can either
+	 continue the loop at the top, or break out.  */
+      ret = cmd->control_type;
+      break;
+
+    case while_control:
+      {
+	/* Parse the loop control expression for the while statement.  */
+	new_line = insert_args (cmd->line);
+	if (!new_line)
+	  return invalid_control;
+	old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                  &new_line);
+	expr = parse_expression (new_line);
+	make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+	
+	ret = simple_control;
+	loop = 1;
+
+	/* Keep iterating so long as the expression is true.  */
+	while (loop == 1)
+	  {
+	    int cond_result;
+
+	    QUIT;
+
+	    /* Evaluate the expression.  */
+	    val_mark = value_mark ();
+	    val = evaluate_expression (expr);
+	    cond_result = value_true (val);
+	    value_free_to_mark (val_mark);
+
+	    /* If the value is false, then break out of the loop.  */
+	    if (!cond_result)
+	      break;
+
+	    /* Execute the body of the while statement.  */
+	    current = *cmd->body_list;
+	    while (current)
+	      {
+		ret = execute_control_command (current);
+
+		/* If we got an error, or a "break" command, then stop
+		   looping.  */
+		if (ret == invalid_control || ret == break_control)
+		  {
+		    loop = 0;
+		    break;
+		  }
+
+		/* If we got a "continue" command, then restart the loop
+		   at this point.  */
+		if (ret == continue_control)
+		  break;
+		
+		/* Get the next statement.  */
+		current = current->next; 
+	      }
+	  }
+
+	/* Reset RET so that we don't recurse the break all the way down.  */
+	if (ret == break_control)
+	  ret = simple_control;
+
+	break;
+      }
+
+    case if_control:
+      {
+	new_line = insert_args (cmd->line);
+	if (!new_line)
+	  return invalid_control;
+	old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                  &new_line);
+	/* Parse the conditional for the if statement.  */
+	expr = parse_expression (new_line);
+	make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+
+	current = NULL;
+	ret = simple_control;
+
+	/* Evaluate the conditional.  */
+	val_mark = value_mark ();
+	val = evaluate_expression (expr);
+
+	/* Choose which arm to take commands from based on the value of the
+	   conditional expression.  */
+	if (value_true (val))
+	  current = *cmd->body_list;
+	else if (cmd->body_count == 2)
+	  current = *(cmd->body_list + 1);
+	value_free_to_mark (val_mark);
+
+	/* Execute commands in the given arm.  */
+	while (current)
+	  {
+	    ret = execute_control_command (current);
+
+	    /* If we got an error, get out.  */
+	    if (ret != simple_control)
+	      break;
+
+	    /* Get the next statement in the body.  */
+	    current = current->next;
+	  }
+
+	break;
+      }
+
+    default:
+      warning ("Invalid control type in command structure.");
+      return invalid_control;
+    }
+
+  if (old_chain)
+    do_cleanups (old_chain);
+
+  return ret;
+}
+
+/* "while" command support.  Executes a body of statements while the
+   loop condition is nonzero.  */
+
+static void
+while_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct command_line *command = NULL;
+
+  control_level = 1;
+  command = get_command_line (while_control, arg);
+
+  if (command == NULL)
+    return;
+
+  execute_control_command (command);
+  free_command_lines (&command);
+}
+
+/* "if" command support.  Execute either the true or false arm depending
+   on the value of the if conditional.  */
+
+static void
+if_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  struct command_line *command = NULL;
+
+  control_level = 1;
+  command = get_command_line (if_control, arg);
+
+  if (command == NULL)
+    return;
+
+  execute_control_command (command);
+  free_command_lines (&command);
+}
+
+/* Cleanup */
+static void
+arg_cleanup ()
+{
+  struct user_args *oargs = user_args;
+  if (!user_args)
+    fatal ("Internal error, arg_cleanup called with no user args.\n");
+
+  user_args = user_args->next;
+  free (oargs);
+}
+
+/* Bind the incomming arguments for a user defined command to
+   $arg0, $arg1 ... $argMAXUSERARGS.  */
+
+static struct cleanup *
+setup_user_args (p)
+     char *p;
+{
+  struct user_args *args;
+  struct cleanup *old_chain;
+  unsigned int arg_count = 0;
+
+  args = (struct user_args *)xmalloc (sizeof (struct user_args));
+  memset (args, 0, sizeof (struct user_args));
+
+  args->next = user_args;
+  user_args = args;
+
+  old_chain = make_cleanup ((make_cleanup_func) arg_cleanup, 0);
+
+  if (p == NULL)
+    return old_chain;
+
+  while (*p)
+    {
+      char *start_arg;
+      int squote = 0;
+      int dquote = 0;
+      int bsquote = 0;
+
+      if (arg_count >= MAXUSERARGS)
+	{
+	  error ("user defined function may only have %d arguments.\n",
+		 MAXUSERARGS);
+	  return old_chain;
+	}
+
+      /* Strip whitespace.  */
+      while (*p == ' ' || *p == '\t')
+	p++;
+
+      /* P now points to an argument.  */
+      start_arg = p;
+      user_args->a[arg_count].arg = p;
+
+      /* Get to the end of this argument.  */
+      while (*p)
+	{
+	  if (((*p == ' ' || *p == '\t')) && !squote && !dquote && !bsquote)
+	    break;
+	  else
+	    {
+	      if (bsquote)
+		bsquote = 0;
+	      else if (*p == '\\')
+		bsquote = 1;
+	      else if (squote)
+		{
+		  if (*p == '\'')
+		    squote = 0;
+		}
+	      else if (dquote)
+		{
+		  if (*p == '"')
+		    dquote = 0;
+		}
+	      else
+		{
+		  if (*p == '\'')
+		    squote = 1;
+		  else if (*p == '"')
+		    dquote = 1;
+		}
+	      p++;
+	    }
+	}
+
+      user_args->a[arg_count].len = p - start_arg;
+      arg_count++;
+      user_args->count++;
+    }
+  return old_chain;
+}
+
+/* Given character string P, return a point to the first argument ($arg),
+   or NULL if P contains no arguments.  */
+
+static char *
+locate_arg (p)
+     char *p;
+{
+  while ((p = strchr (p, '$')))
+    {
+      if (strncmp (p, "$arg", 4) == 0 && isdigit (p[4]))
+	return p;
+      p++;
+    }
+  return NULL;
+}
+
+/* Insert the user defined arguments stored in user_arg into the $arg
+   arguments found in line, with the updated copy being placed into nline.  */
+
+static char *
+insert_args (line)
+     char *line;
+{
+  char *p, *save_line, *new_line;
+  unsigned len, i;
+
+  /* First we need to know how much memory to allocate for the new line.  */
+  save_line = line;
+  len = 0;
+  while ((p = locate_arg (line)))
+    {
+      len += p - line;
+      i = p[4] - '0';
+      
+      if (i >= user_args->count)
+	{
+	  error ("Missing argument %d in user function.\n", i);
+	  return NULL;
+	}
+      len += user_args->a[i].len;
+      line = p + 5;
+    }
+
+  /* Don't forget the tail.  */
+  len += strlen (line);
+
+  /* Allocate space for the new line and fill it in.  */
+  new_line = (char *)xmalloc (len + 1);
+  if (new_line == NULL)
+    return NULL;
+
+  /* Restore pointer to beginning of old line.  */
+  line = save_line;
+
+  /* Save pointer to beginning of new line.  */
+  save_line = new_line;
+
+  while ((p = locate_arg (line)))
+    {
+      int i, len;
+
+      memcpy (new_line, line, p - line);
+      new_line += p - line;
+      i = p[4] - '0';
+
+      len = user_args->a[i].len;
+      if (len)
+	{
+	  memcpy (new_line, user_args->a[i].arg, len);
+	  new_line += len;
+	}
+      line = p + 5;
+    }
+  /* Don't forget the tail.  */
+  strcpy (new_line, line);
+
+  /* Return a pointer to the beginning of the new line.  */
+  return save_line;
+}
+
+void
+execute_user_command (c, args)
+     struct cmd_list_element *c;
+     char *args;
+{
+  register struct command_line *cmdlines;
+  struct cleanup *old_chain;
+  enum command_control_type ret;
+
+  old_chain = setup_user_args (args);
+
+  cmdlines = c->user_commands;
+  if (cmdlines == 0)
+    /* Null command */
+    return;
+
+  /* Set the instream to 0, indicating execution of a
+     user-defined function.  */
+  old_chain = make_cleanup ((make_cleanup_func) source_cleanup, instream);
+  instream = (FILE *) 0;
+  while (cmdlines)
+    {
+      ret = execute_control_command (cmdlines);
+      if (ret != simple_control && ret != break_control)
+	{
+	  warning ("Error in control structure.\n");
+	  break;
+	}
+      cmdlines = cmdlines->next;
+    }
+  do_cleanups (old_chain);
+}
+
+/* Execute the line P as a command.
+   Pass FROM_TTY as second argument to the defining function.  */
+
+void
+execute_command (p, from_tty)
+     char *p;
+     int from_tty;
+{
+  register struct cmd_list_element *c;
+  register enum language flang;
+  static int warned = 0;
+  /* FIXME: These should really be in an appropriate header file */
+  extern void serial_log_command PARAMS ((const char *));
+
+  free_all_values ();
+
+  /* Force cleanup of any alloca areas if using C alloca instead of
+     a builtin alloca.  */
+  alloca (0);
+
+  /* This can happen when command_line_input hits end of file.  */
+  if (p == NULL)
+      return;
+
+  serial_log_command (p);
+
+  while (*p == ' ' || *p == '\t') p++;
+  if (*p)
+    {
+      char *arg;
+
+      c = lookup_cmd (&p, cmdlist, "", 0, 1);
+      /* Pass null arg rather than an empty one.  */
+      arg = *p ? p : 0;
+
+      /* Clear off trailing whitespace, except for set and complete command.  */
+      if (arg && c->type != set_cmd && c->function.cfunc != complete_command)
+	{
+	  p = arg + strlen (arg) - 1;
+	  while (p >= arg && (*p == ' ' || *p == '\t'))
+	    p--;
+	  *(p + 1) = '\0';
+	}
+
+      /* If this command has been hooked, run the hook first. */
+      if (c->hook)
+	execute_user_command (c->hook, (char *)0);
+
+      if (c->class == class_user)
+	execute_user_command (c, arg);
+      else if (c->type == set_cmd || c->type == show_cmd)
+	do_setshow_command (arg, from_tty & caution, c);
+      else if (c->function.cfunc == NO_FUNCTION)
+	error ("That is not a command, just a help topic.");
+      else if (call_command_hook)
+	call_command_hook (c, arg, from_tty & caution);
+      else
+	(*c->function.cfunc) (arg, from_tty & caution);
+   }
+
+  /* Tell the user if the language has changed (except first time).  */
+  if (current_language != expected_language)
+  {
+    if (language_mode == language_mode_auto) {
+      language_info (1);	/* Print what changed.  */
+    }
+    warned = 0;
+  }
+
+  /* Warn the user if the working language does not match the
+     language of the current frame.  Only warn the user if we are
+     actually running the program, i.e. there is a stack. */
+  /* FIXME:  This should be cacheing the frame and only running when
+     the frame changes.  */
+
+  if (target_has_stack)
+    {
+      flang = get_frame_language ();
+      if (!warned
+	  && flang != language_unknown
+	  && flang != current_language->la_language)
+	{
+	  printf_filtered ("%s\n", lang_frame_mismatch_warn);
+	  warned = 1;
+	}
+    }
+}
+
+/* ARGSUSED */
+static void
+command_loop_marker (foo)
+     int foo;
+{
+}
+
+/* Read commands from `instream' and execute them
+   until end of file or error reading instream.  */
+
+void
+command_loop ()
+{
+  struct cleanup *old_chain;
+  char *command;
+  int stdin_is_tty = ISATTY (stdin);
+  long time_at_cmd_start;
+#ifdef HAVE_SBRK
+  long space_at_cmd_start = 0;
+#endif
+  extern int display_time;
+  extern int display_space;
+
+  while (instream && !feof (instream))
+    {
+#if defined(TUI)
+      extern int insert_mode;
+#endif
+      if (window_hook && instream == stdin)
+	(*window_hook) (instream, prompt);
+
+      quit_flag = 0;
+      if (instream == stdin && stdin_is_tty)
+	reinitialize_more_filter ();
+      old_chain = make_cleanup ((make_cleanup_func) command_loop_marker, 0);
+
+#if defined(TUI)
+      /* A bit of paranoia: I want to make sure the "insert_mode" global
+       * is clear except when it is being used for command-line editing
+       * (see tuiIO.c, utils.c); otherwise normal output will
+       * get messed up in the TUI. So clear it before/after
+       * the command-line-input call. - RT
+       */
+      insert_mode = 0;
+#endif
+      /* Get a command-line. This calls the readline package. */
+      command = command_line_input (instream == stdin ? prompt : (char *) NULL,
+				    instream == stdin, "prompt");
+#if defined(TUI)
+      insert_mode = 0;
+#endif
+      if (command == 0)
+	return;
+
+      time_at_cmd_start = get_run_time ();
+
+      if (display_space)
+	{
+#ifdef HAVE_SBRK
+	  extern char **environ;
+	  char *lim = (char *) sbrk (0);
+
+	  space_at_cmd_start = (long) (lim - (char *) &environ);
+#endif
+	}
+
+      execute_command (command, instream == stdin);
+      /* Do any commands attached to breakpoint we stopped at.  */
+      bpstat_do_actions (&stop_bpstat);
+      do_cleanups (old_chain);
+
+      if (display_time)
+	{
+	  long cmd_time = get_run_time () - time_at_cmd_start;
+
+	  printf_unfiltered ("Command execution time: %ld.%06ld\n",
+			     cmd_time / 1000000, cmd_time % 1000000);
+	}
+
+      if (display_space)
+	{
+#ifdef HAVE_SBRK
+	  extern char **environ;
+	  char *lim = (char *) sbrk (0);
+	  long space_now = lim - (char *) &environ;
+	  long space_diff = space_now - space_at_cmd_start;
+
+	  printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
+			     space_now,
+			     (space_diff >= 0 ? '+' : '-'),
+			     space_diff);
+#endif
+	}
+    }
+}
+
+/* Commands call this if they do not want to be repeated by null lines.  */
+
+void
+dont_repeat ()
+{
+  if (server_command)
+    return;
+
+  /* If we aren't reading from standard input, we are saving the last
+     thing read from stdin in line and don't want to delete it.  Null lines
+     won't repeat here in any case.  */
+  if (instream == stdin)
+    *line = 0;
+}
+
+/* Read a line from the stream "instream" without command line editing.
+
+   It prints PRROMPT once at the start.
+   Action is compatible with "readline", e.g. space for the result is
+   malloc'd and should be freed by the caller.
+
+   A NULL return means end of file.  */
+char *
+gdb_readline (prrompt)
+     char *prrompt;
+{
+  int c;
+  char *result;
+  int input_index = 0;
+  int result_size = 80;
+
+  if (prrompt)
+    {
+      /* Don't use a _filtered function here.  It causes the assumed
+	 character position to be off, since the newline we read from
+	 the user is not accounted for.  */
+      fputs_unfiltered (prrompt, gdb_stdout);
+#ifdef MPW
+      /* Move to a new line so the entered line doesn't have a prompt
+	 on the front of it. */
+      fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+      gdb_flush (gdb_stdout);
+    }
+
+  result = (char *) xmalloc (result_size);
+
+  while (1)
+    {
+      /* Read from stdin if we are executing a user defined command.
+	 This is the right thing for prompt_for_continue, at least.  */
+      c = fgetc (instream ? instream : stdin);
+
+      if (c == EOF)
+	{
+	  if (input_index > 0)
+	    /* The last line does not end with a newline.  Return it, and
+	       if we are called again fgetc will still return EOF and
+	       we'll return NULL then.  */
+	    break;
+	  free (result);
+	  return NULL;
+	}
+
+      if (c == '\n')
+#ifndef CRLF_SOURCE_FILES
+	break;
+#else
+	{
+	  if (input_index > 0 && result[input_index - 1] == '\r')
+	    input_index--;
+	  break;
+	}
+#endif
+
+      result[input_index++] = c;
+      while (input_index >= result_size)
+	{
+	  result_size *= 2;
+	  result = (char *) xrealloc (result, result_size);
+	}
+    }
+
+  result[input_index++] = '\0';
+  return result;
+}
+
+/* Variables which control command line editing and history
+   substitution.  These variables are given default values at the end
+   of this file.  */
+static int command_editing_p;
+static int history_expansion_p;
+static int write_history_p;
+static int history_size;
+static char *history_filename;
+
+/* readline uses the word breaks for two things:
+   (1) In figuring out where to point the TEXT parameter to the
+   rl_completion_entry_function.  Since we don't use TEXT for much,
+   it doesn't matter a lot what the word breaks are for this purpose, but
+   it does affect how much stuff M-? lists.
+   (2) If one of the matches contains a word break character, readline
+   will quote it.  That's why we switch between
+   gdb_completer_word_break_characters and
+   gdb_completer_command_word_break_characters.  I'm not sure when
+   we need this behavior (perhaps for funky characters in C++ symbols?).  */
+
+/* Variables which are necessary for fancy command line editing.  */
+char *gdb_completer_word_break_characters =
+  " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,-";
+
+/* When completing on command names, we remove '-' from the list of
+   word break characters, since we use it in command names.  If the
+   readline library sees one in any of the current completion strings,
+   it thinks that the string needs to be quoted and automatically supplies
+   a leading quote. */
+char *gdb_completer_command_word_break_characters =
+  " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,";
+
+/* Characters that can be used to quote completion strings.  Note that we
+   can't include '"' because the gdb C parser treats such quoted sequences
+   as strings. */
+char *gdb_completer_quote_characters =
+  "'";
+
+/* Functions that are used as part of the fancy command line editing.  */
+
+/* This can be used for functions which don't want to complete on symbols
+   but don't want to complete on anything else either.  */
+/* ARGSUSED */
+char **
+noop_completer (text, prefix)
+     char *text;
+     char *prefix;
+{
+  return NULL;
+}
+
+/* Complete on filenames.  */
+char **
+filename_completer (text, word)
+     char *text;
+     char *word;
+{
+  /* From readline.  */
+  extern char *filename_completion_function PARAMS ((char *, int));
+  int subsequent_name;
+  char **return_val;
+  int return_val_used;
+  int return_val_alloced;
+
+  return_val_used = 0;
+  /* Small for testing.  */
+  return_val_alloced = 1;
+  return_val = (char **) xmalloc (return_val_alloced * sizeof (char *));
+
+  subsequent_name = 0;
+  while (1)
+    {
+      char *p;
+      p = filename_completion_function (text, subsequent_name);
+      if (return_val_used >= return_val_alloced)
+	{
+	  return_val_alloced *= 2;
+	  return_val =
+	    (char **) xrealloc (return_val,
+				return_val_alloced * sizeof (char *));
+	}
+      if (p == NULL)
+	{
+	  return_val[return_val_used++] = p;
+	  break;
+	}
+      /* Like emacs, don't complete on old versions.  Especially useful
+	 in the "source" command.  */
+      if (p[strlen (p) - 1] == '~')
+	continue;
+
+      {
+	char *q;
+	if (word == text)
+	  /* Return exactly p.  */
+	  return_val[return_val_used++] = p;
+	else if (word > text)
+	  {
+	    /* Return some portion of p.  */
+	    q = xmalloc (strlen (p) + 5);
+	    strcpy (q, p + (word - text));
+	    return_val[return_val_used++] = q;
+	    free (p);
+	  }
+	else
+	  {
+	    /* Return some of TEXT plus p.  */
+	    q = xmalloc (strlen (p) + (text - word) + 5);
+	    strncpy (q, word, text - word);
+	    q[text - word] = '\0';
+	    strcat (q, p);
+	    return_val[return_val_used++] = q;
+	    free (p);
+	  }
+      }
+      subsequent_name = 1;
+    }
+#if 0
+  /* There is no way to do this just long enough to affect quote inserting
+     without also affecting the next completion.  This should be fixed in
+     readline.  FIXME.  */
+  /* Insure that readline does the right thing
+     with respect to inserting quotes.  */
+  rl_completer_word_break_characters = "";
+#endif
+  return return_val;
+}
+
+/* Here are some useful test cases for completion.  FIXME: These should
+   be put in the test suite.  They should be tested with both M-? and TAB.
+
+   "show output-" "radix"
+   "show output" "-radix"
+   "p" ambiguous (commands starting with p--path, print, printf, etc.)
+   "p "  ambiguous (all symbols)
+   "info t foo" no completions
+   "info t " no completions
+   "info t" ambiguous ("info target", "info terminal", etc.)
+   "info ajksdlfk" no completions
+   "info ajksdlfk " no completions
+   "info" " "
+   "info " ambiguous (all info commands)
+   "p \"a" no completions (string constant)
+   "p 'a" ambiguous (all symbols starting with a)
+   "p b-a" ambiguous (all symbols starting with a)
+   "p b-" ambiguous (all symbols)
+   "file Make" "file" (word break hard to screw up here)
+   "file ../gdb.stabs/we" "ird" (needs to not break word at slash)
+   */
+
+/* Generate completions one by one for the completer.  Each time we are
+   called return another potential completion to the caller.
+   line_completion just completes on commands or passes the buck to the
+   command's completer function, the stuff specific to symbol completion
+   is in make_symbol_completion_list.
+
+   TEXT is the caller's idea of the "word" we are looking at.
+
+   MATCHES is the number of matches that have currently been collected from
+   calling this completion function.  When zero, then we need to initialize,
+   otherwise the initialization has already taken place and we can just
+   return the next potential completion string.
+
+   LINE_BUFFER is available to be looked at; it contains the entire text
+   of the line.  POINT is the offset in that line of the cursor.  You
+   should pretend that the line ends at POINT.
+
+   Returns NULL if there are no more completions, else a pointer to a string
+   which is a possible completion, it is the caller's responsibility to
+   free the string.  */
+
+static char *
+line_completion_function (text, matches, line_buffer, point)
+     char *text;
+     int matches;
+     char *line_buffer;
+     int point;
+{
+  static char **list = (char **)NULL;		/* Cache of completions */
+  static int index;				/* Next cached completion */
+  char *output = NULL;
+  char *tmp_command, *p;
+  /* Pointer within tmp_command which corresponds to text.  */
+  char *word;
+  struct cmd_list_element *c, *result_list;
+
+  if (matches == 0)
+    {
+      /* The caller is beginning to accumulate a new set of completions, so
+	 we need to find all of them now, and cache them for returning one at
+	 a time on future calls. */
+
+      if (list)
+	{
+	  /* Free the storage used by LIST, but not by the strings inside.
+	     This is because rl_complete_internal () frees the strings. */
+	  free ((PTR)list);
+	}
+      list = 0;
+      index = 0;
+
+      /* Choose the default set of word break characters to break completions.
+	 If we later find out that we are doing completions on command strings
+	 (as opposed to strings supplied by the individual command completer
+	 functions, which can be any string) then we will switch to the
+	 special word break set for command strings, which leaves out the
+	 '-' character used in some commands.  */
+
+      rl_completer_word_break_characters =
+	  gdb_completer_word_break_characters;
+
+      /* Decide whether to complete on a list of gdb commands or on symbols. */
+      tmp_command = (char *) alloca (point + 1);
+      p = tmp_command;
+
+      strncpy (tmp_command, line_buffer, point);
+      tmp_command[point] = '\0';
+      /* Since text always contains some number of characters leading up
+	 to point, we can find the equivalent position in tmp_command
+	 by subtracting that many characters from the end of tmp_command.  */
+      word = tmp_command + point - strlen (text);
+
+      if (point == 0)
+	{
+	  /* An empty line we want to consider ambiguous; that is, it
+	     could be any command.  */
+	  c = (struct cmd_list_element *) -1;
+	  result_list = 0;
+	}
+      else
+	{
+	  c = lookup_cmd_1 (&p, cmdlist, &result_list, 1);
+	}
+
+      /* Move p up to the next interesting thing.  */
+      while (*p == ' ' || *p == '\t')
+	{
+	  p++;
+	}
+
+      if (!c)
+	{
+	  /* It is an unrecognized command.  So there are no
+	     possible completions.  */
+	  list = NULL;
+	}
+      else if (c == (struct cmd_list_element *) -1)
+	{
+	  char *q;
+
+	  /* lookup_cmd_1 advances p up to the first ambiguous thing, but
+	     doesn't advance over that thing itself.  Do so now.  */
+	  q = p;
+	  while (*q && (isalnum (*q) || *q == '-' || *q == '_'))
+	    ++q;
+	  if (q != tmp_command + point)
+	    {
+	      /* There is something beyond the ambiguous
+		 command, so there are no possible completions.  For
+		 example, "info t " or "info t foo" does not complete
+		 to anything, because "info t" can be "info target" or
+		 "info terminal".  */
+	      list = NULL;
+	    }
+	  else
+	    {
+	      /* We're trying to complete on the command which was ambiguous.
+		 This we can deal with.  */
+	      if (result_list)
+		{
+		  list = complete_on_cmdlist (*result_list->prefixlist, p,
+					      word);
+		}
+	      else
+		{
+		  list = complete_on_cmdlist (cmdlist, p, word);
+		}
+	      /* Insure that readline does the right thing with respect to
+		 inserting quotes.  */
+	      rl_completer_word_break_characters =
+		gdb_completer_command_word_break_characters;
+	    }
+	}
+      else
+	{
+	  /* We've recognized a full command.  */
+
+	  if (p == tmp_command + point)
+	    {
+	      /* There is no non-whitespace in the line beyond the command.  */
+
+	      if (p[-1] == ' ' || p[-1] == '\t')
+		{
+		  /* The command is followed by whitespace; we need to complete
+		     on whatever comes after command.  */
+		  if (c->prefixlist)
+		    {
+		      /* It is a prefix command; what comes after it is
+			 a subcommand (e.g. "info ").  */
+		      list = complete_on_cmdlist (*c->prefixlist, p, word);
+
+		      /* Insure that readline does the right thing
+			 with respect to inserting quotes.  */
+		      rl_completer_word_break_characters =
+			gdb_completer_command_word_break_characters;
+		    }
+		  else if (c->enums)
+		    {
+		      list = complete_on_enum (c->enums, p, word);
+		      rl_completer_word_break_characters =
+			gdb_completer_command_word_break_characters;
+		    }
+		  else
+		    {
+		      /* It is a normal command; what comes after it is
+			 completed by the command's completer function.  */
+		      list = (*c->completer) (p, word);
+		    }
+		}
+	      else
+		{
+		  /* The command is not followed by whitespace; we need to
+		     complete on the command itself.  e.g. "p" which is a
+		     command itself but also can complete to "print", "ptype"
+		     etc.  */
+		  char *q;
+
+		  /* Find the command we are completing on.  */
+		  q = p;
+		  while (q > tmp_command)
+		    {
+		      if (isalnum (q[-1]) || q[-1] == '-' || q[-1] == '_')
+			--q;
+		      else
+			break;
+		    }
+
+		  list = complete_on_cmdlist (result_list, q, word);
+
+		  /* Insure that readline does the right thing
+		     with respect to inserting quotes.  */
+		  rl_completer_word_break_characters =
+		    gdb_completer_command_word_break_characters;
+		}
+	    }
+	  else
+	    {
+	      /* There is non-whitespace beyond the command.  */
+
+	      if (c->prefixlist && !c->allow_unknown)
+		{
+		  /* It is an unrecognized subcommand of a prefix command,
+		     e.g. "info adsfkdj".  */
+		  list = NULL;
+		}
+	      else if (c->enums)
+		{
+		  list = complete_on_enum (c->enums, p, word);
+		}
+	      else
+		{
+		  /* It is a normal command.  */
+		  list = (*c->completer) (p, word);
+		}
+	    }
+	}
+    }
+
+  /* If we found a list of potential completions during initialization then
+     dole them out one at a time.  The vector of completions is NULL
+     terminated, so after returning the last one, return NULL (and continue
+     to do so) each time we are called after that, until a new list is
+     available. */
+
+  if (list)
+    {
+      output = list[index];
+      if (output)
+	{
+	  index++;
+	}
+    }
+
+#if 0
+  /* Can't do this because readline hasn't yet checked the word breaks
+     for figuring out whether to insert a quote.  */
+  if (output == NULL)
+    /* Make sure the word break characters are set back to normal for the
+       next time that readline tries to complete something.  */
+    rl_completer_word_break_characters =
+      gdb_completer_word_break_characters;
+#endif
+
+  return (output);
+}
+
+/* Line completion interface function for readline.  */
+
+static char *
+readline_line_completion_function (text, matches)
+     char *text;
+     int matches;
+{
+  return line_completion_function (text, matches, rl_line_buffer, rl_point);
+}
+
+/* Skip over a possibly quoted word (as defined by the quote characters
+   and word break characters the completer uses).  Returns pointer to the
+   location after the "word". */
+
+char *
+skip_quoted (str)
+     char *str;
+{
+  char quote_char = '\0';
+  char *scan;
+
+  for (scan = str; *scan != '\0'; scan++)
+    {
+      if (quote_char != '\0')
+	{
+	  /* Ignore everything until the matching close quote char */
+	  if (*scan == quote_char)
+	    {
+	      /* Found matching close quote. */
+	      scan++;
+	      break;
+	    }
+	}
+      else if (strchr (gdb_completer_quote_characters, *scan))
+	{
+	  /* Found start of a quoted string. */
+	  quote_char = *scan;
+	}
+      else if (strchr (gdb_completer_word_break_characters, *scan))
+	{
+	  break;
+	}
+    }
+  return (scan);
+}
+
+
+#ifdef STOP_SIGNAL
+static void
+stop_sig (signo)
+int signo;
+{
+#if STOP_SIGNAL == SIGTSTP
+  signal (SIGTSTP, SIG_DFL);
+  sigsetmask (0);
+  kill (getpid (), SIGTSTP);
+  signal (SIGTSTP, stop_sig);
+#else
+  signal (STOP_SIGNAL, stop_sig);
+#endif
+  printf_unfiltered ("%s", prompt);
+  gdb_flush (gdb_stdout);
+
+  /* Forget about any previous command -- null line now will do nothing.  */
+  dont_repeat ();
+}
+#endif /* STOP_SIGNAL */
+
+/* Initialize signal handlers. */
+static void
+do_nothing (signo)
+int signo;
+{
+  /* Under System V the default disposition of a signal is reinstated after
+     the signal is caught and delivered to an application process.  On such
+     systems one must restore the replacement signal handler if one wishes
+     to continue handling the signal in one's program.  On BSD systems this
+     is not needed but it is harmless, and it simplifies the code to just do
+     it unconditionally. */
+  signal (signo, do_nothing);
+}
+
+static void
+init_signals ()
+{
+  signal (SIGINT, request_quit);
+
+  /* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
+     to the inferior and breakpoints will be ignored.  */
+#ifdef SIGTRAP
+  signal (SIGTRAP, SIG_DFL);
+#endif
+
+  /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
+     passed to the inferior, which we don't want.  It would be
+     possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
+     on BSD4.3 systems using vfork, that can affect the
+     GDB process as well as the inferior (the signal handling tables
+     might be in memory, shared between the two).  Since we establish
+     a handler for SIGQUIT, when we call exec it will set the signal
+     to SIG_DFL for us.  */
+  signal (SIGQUIT, do_nothing);
+#ifdef SIGHUP
+  if (signal (SIGHUP, do_nothing) != SIG_IGN)
+    signal (SIGHUP, disconnect);
+#endif
+  signal (SIGFPE, float_handler);
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+  signal (SIGWINCH, SIGWINCH_HANDLER);
+#endif
+}
+
+/* Read one line from the command input stream `instream'
+   into the local static buffer `linebuffer' (whose current length
+   is `linelength').
+   The buffer is made bigger as necessary.
+   Returns the address of the start of the line.
+
+   NULL is returned for end of file.
+
+   *If* the instream == stdin & stdin is a terminal, the line read
+   is copied into the file line saver (global var char *line,
+   length linesize) so that it can be duplicated.
+
+   This routine either uses fancy command line editing or
+   simple input as the user has requested.  */
+
+char *
+command_line_input (prrompt, repeat, annotation_suffix)
+     char *prrompt;
+     int repeat;
+     char *annotation_suffix;
+{
+  static char *linebuffer = 0;
+  static unsigned linelength = 0;
+  register char *p;
+  char *p1;
+  char *rl;
+  char *local_prompt = prrompt;
+  char *nline;
+  char got_eof = 0;
+
+  /* The annotation suffix must be non-NULL.  */
+  if (annotation_suffix == NULL)
+    annotation_suffix = "";
+
+  if (annotation_level > 1 && instream == stdin)
+    {
+      local_prompt = alloca ((prrompt == NULL ? 0 : strlen (prrompt))
+			     + strlen (annotation_suffix) + 40);
+      if (prrompt == NULL)
+	local_prompt[0] = '\0';
+      else
+	strcpy (local_prompt, prrompt);
+      strcat (local_prompt, "\n\032\032");
+      strcat (local_prompt, annotation_suffix);
+      strcat (local_prompt, "\n");
+    }
+
+  if (linebuffer == 0)
+    {
+      linelength = 80;
+      linebuffer = (char *) xmalloc (linelength);
+    }
+
+  p = linebuffer;
+
+  /* Control-C quits instantly if typed while in this loop
+     since it should not wait until the user types a newline.  */
+  immediate_quit++;
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, stop_sig);
+#endif
+
+  while (1)
+    {
+      /* Make sure that all output has been output.  Some machines may let
+	 you get away with leaving out some of the gdb_flush, but not all.  */
+      wrap_here ("");
+      gdb_flush (gdb_stdout);
+      gdb_flush (gdb_stderr);
+
+      if (source_file_name != NULL)
+	{
+	  ++source_line_number;
+	  sprintf (source_error,
+		   "%s%s:%d: Error in sourced command file:\n",
+		   source_pre_error,
+		   source_file_name,
+		   source_line_number);
+	  error_pre_print = source_error;
+	}
+
+      if (annotation_level > 1 && instream == stdin)
+	{
+	  printf_unfiltered ("\n\032\032pre-");
+	  printf_unfiltered (annotation_suffix);
+	  printf_unfiltered ("\n");
+	}
+
+      /* Don't use fancy stuff if not talking to stdin.  */
+      if (readline_hook && instream == NULL)
+	{
+	  rl = (*readline_hook) (local_prompt);
+	}
+      else if (command_editing_p && instream == stdin && ISATTY (instream))
+	{
+	  rl = readline (local_prompt);
+	}
+      else
+	{
+	  rl = gdb_readline (local_prompt);
+	}
+
+      if (annotation_level > 1 && instream == stdin)
+	{
+	  printf_unfiltered ("\n\032\032post-");
+	  printf_unfiltered (annotation_suffix);
+	  printf_unfiltered ("\n");
+	}
+
+      if (!rl || rl == (char *) EOF)
+	{
+	  got_eof = 1;
+	  break;
+	}
+      if (strlen(rl) + 1 + (p - linebuffer) > linelength)
+	{
+	  linelength = strlen(rl) + 1 + (p - linebuffer);
+	  nline = (char *) xrealloc (linebuffer, linelength);
+	  p += nline - linebuffer;
+	  linebuffer = nline;
+	}
+      p1 = rl;
+      /* Copy line.  Don't copy null at end.  (Leaves line alone
+         if this was just a newline)  */
+      while (*p1)
+	*p++ = *p1++;
+
+      free (rl);			/* Allocated in readline.  */
+
+      if (p == linebuffer || *(p - 1) != '\\')
+	break;
+
+      p--;			/* Put on top of '\'.  */
+      local_prompt = (char *) 0;
+  }
+
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, SIG_DFL);
+#endif
+  immediate_quit--;
+
+  if (got_eof)
+    return NULL;
+
+#define SERVER_COMMAND_LENGTH 7
+  server_command =
+    (p - linebuffer > SERVER_COMMAND_LENGTH)
+      && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
+  if (server_command)
+    {
+      /* Note that we don't set `line'.  Between this and the check in
+	 dont_repeat, this insures that repeating will still do the
+	 right thing.  */
+      *p = '\0';
+      return linebuffer + SERVER_COMMAND_LENGTH;
+    }
+
+  /* Do history expansion if that is wished.  */
+  if (history_expansion_p && instream == stdin
+      && ISATTY (instream))
+    {
+      char *history_value;
+      int expanded;
+
+      *p = '\0';		/* Insert null now.  */
+      expanded = history_expand (linebuffer, &history_value);
+      if (expanded)
+	{
+	  /* Print the changes.  */
+	  printf_unfiltered ("%s\n", history_value);
+
+	  /* If there was an error, call this function again.  */
+	  if (expanded < 0)
+	    {
+	      free (history_value);
+	      return command_line_input (prrompt, repeat, annotation_suffix);
+	    }
+	  if (strlen (history_value) > linelength)
+	    {
+	      linelength = strlen (history_value) + 1;
+	      linebuffer = (char *) xrealloc (linebuffer, linelength);
+	    }
+	  strcpy (linebuffer, history_value);
+	  p = linebuffer + strlen(linebuffer);
+	  free (history_value);
+	}
+    }
+
+  /* If we just got an empty line, and that is supposed
+     to repeat the previous command, return the value in the
+     global buffer.  */
+  if (repeat && p == linebuffer)
+    return line;
+  for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++) ;
+  if (repeat && !*p1)
+    return line;
+
+  *p = 0;
+
+  /* Add line to history if appropriate.  */
+  if (instream == stdin
+      && ISATTY (stdin) && *linebuffer)
+    add_history (linebuffer);
+
+  /* Note: lines consisting solely of comments are added to the command
+     history.  This is useful when you type a command, and then
+     realize you don't want to execute it quite yet.  You can comment
+     out the command and then later fetch it from the value history
+     and remove the '#'.  The kill ring is probably better, but some
+     people are in the habit of commenting things out.  */
+  if (*p1 == '#')
+    *p1 = '\0';  /* Found a comment. */
+
+  /* Save into global buffer if appropriate.  */
+  if (repeat)
+    {
+      if (linelength > linesize)
+	{
+	  line = xrealloc (line, linelength);
+	  linesize = linelength;
+	}
+      strcpy (line, linebuffer);
+      return line;
+    }
+
+  return linebuffer;
+}
+
+
+/* Expand the body_list of COMMAND so that it can hold NEW_LENGTH
+   code bodies.  This is typically used when we encounter an "else"
+   clause for an "if" command.  */
+
+static void
+realloc_body_list (command, new_length)
+     struct command_line *command;
+     int new_length;
+{
+  int n;
+  struct command_line **body_list;
+
+  n = command->body_count;
+
+  /* Nothing to do?  */
+  if (new_length <= n)
+    return;
+
+  body_list = (struct command_line **)
+    xmalloc (sizeof (struct command_line *) * new_length);
+
+  memcpy (body_list, command->body_list, sizeof (struct command_line *) * n);
+
+  free (command->body_list);
+  command->body_list = body_list;
+  command->body_count = new_length;
+}
+
+/* Read one line from the input stream.  If the command is an "else" or
+   "end", return such an indication to the caller.  */
+
+static enum misc_command_type
+read_next_line (command)
+     struct command_line **command;
+{
+  char *p, *p1, *prompt_ptr, control_prompt[256];
+  int i = 0;
+
+  if (control_level >= 254)
+    error ("Control nesting too deep!\n");
+
+  /* Set a prompt based on the nesting of the control commands.  */
+  if (instream == stdin || (instream == 0 && readline_hook != NULL))
+    {
+      for (i = 0; i < control_level; i++)
+	control_prompt[i] = ' ';
+      control_prompt[i] = '>';
+      control_prompt[i+1] = '\0';
+      prompt_ptr = (char *)&control_prompt[0];
+    }
+  else
+    prompt_ptr = NULL;
+
+  p = command_line_input (prompt_ptr, instream == stdin, "commands");
+
+  /* Not sure what to do here.  */
+  if (p == NULL)
+    return end_command;
+
+  /* Strip leading and trailing whitespace.  */
+  while (*p == ' ' || *p == '\t')
+    p++;
+
+  p1 = p + strlen (p);
+  while (p1 != p && (p1[-1] == ' ' || p1[-1] == '\t'))
+    p1--;
+
+  /* Blanks and comments don't really do anything, but we need to
+     distinguish them from else, end and other commands which can be
+     executed.  */
+  if (p1 == p || p[0] == '#')
+    return nop_command;
+      
+  /* Is this the end of a simple, while, or if control structure?  */
+  if (p1 - p == 3 && !strncmp (p, "end", 3))
+    return end_command;
+
+  /* Is the else clause of an if control structure?  */
+  if (p1 - p == 4 && !strncmp (p, "else", 4))
+    return else_command;
+
+  /* Check for while, if, break, continue, etc and build a new command
+     line structure for them.  */
+  if (p1 - p > 5 && !strncmp (p, "while", 5))
+    *command = build_command_line (while_control, p + 6);
+  else if (p1 - p > 2 && !strncmp (p, "if", 2))
+    *command = build_command_line (if_control, p + 3);
+  else if (p1 - p == 10 && !strncmp (p, "loop_break", 10))
+    {
+      *command = (struct command_line *)
+	xmalloc (sizeof (struct command_line));
+      (*command)->next = NULL;
+      (*command)->line = NULL;
+      (*command)->control_type = break_control;
+      (*command)->body_count = 0;
+      (*command)->body_list = NULL;
+    }
+  else if (p1 - p == 13 && !strncmp (p, "loop_continue", 13))
+    {
+      *command = (struct command_line *)
+	xmalloc (sizeof (struct command_line));
+      (*command)->next = NULL;
+      (*command)->line = NULL;
+      (*command)->control_type = continue_control;
+      (*command)->body_count = 0;
+      (*command)->body_list = NULL;
+    }
+  else
+    {
+      /* A normal command.  */
+      *command = (struct command_line *)
+	xmalloc (sizeof (struct command_line));
+      (*command)->next = NULL;
+      (*command)->line = savestring (p, p1 - p);
+      (*command)->control_type = simple_control;
+      (*command)->body_count = 0;
+      (*command)->body_list = NULL;
+  }
+
+  /* Nothing special.  */
+  return ok_command;
+}
+
+/* Recursively read in the control structures and create a command_line 
+   structure from them.
+
+   The parent_control parameter is the control structure in which the
+   following commands are nested.  */
+
+static enum command_control_type
+recurse_read_control_structure (current_cmd)
+     struct command_line *current_cmd;
+{
+  int current_body, i;
+  enum misc_command_type val;
+  enum command_control_type ret;
+  struct command_line **body_ptr, *child_tail, *next;
+
+  child_tail = NULL;
+  current_body = 1;
+
+  /* Sanity checks.  */
+  if (current_cmd->control_type == simple_control)
+    {
+      error ("Recursed on a simple control type\n");
+      return invalid_control;
+    }
+
+  if (current_body > current_cmd->body_count)
+    {
+      error ("Allocated body is smaller than this command type needs\n");
+      return invalid_control;
+    }
+
+  /* Read lines from the input stream and build control structures.  */
+  while (1)
+    {
+      dont_repeat ();
+
+      next = NULL;
+      val = read_next_line (&next);
+
+      /* Just skip blanks and comments.  */
+      if (val == nop_command)
+	continue;
+
+      if (val == end_command)
+	{
+	  if (current_cmd->control_type == while_control
+	      || current_cmd->control_type == if_control)
+	    {
+	      /* Success reading an entire control structure.  */
+	      ret = simple_control;
+	      break;
+	    }
+	  else
+	    {
+	      ret = invalid_control;
+	      break;
+	    }
+	}
+      
+      /* Not the end of a control structure.  */
+      if (val == else_command)
+	{
+	  if (current_cmd->control_type == if_control
+	      && current_body == 1)
+	    {
+	      realloc_body_list (current_cmd, 2);
+	      current_body = 2;
+	      child_tail = NULL;
+	      continue;
+	    }
+	  else
+	    {
+	      ret = invalid_control;
+	      break;
+	    }
+	}
+
+      if (child_tail)
+	{
+	  child_tail->next = next;
+	}
+      else
+	{
+	  body_ptr = current_cmd->body_list;
+	  for (i = 1; i < current_body; i++)
+	    body_ptr++;
+
+	  *body_ptr = next;
+
+	}
+
+      child_tail = next;
+
+      /* If the latest line is another control structure, then recurse
+	 on it.  */
+      if (next->control_type == while_control
+	  || next->control_type == if_control)
+	{
+	  control_level++;
+	  ret = recurse_read_control_structure (next);
+	  control_level--;
+
+	  if (ret != simple_control)
+	    break;
+	}
+    }
+
+  dont_repeat ();
+
+  return ret;
+}
+
+/* Read lines from the input stream and accumulate them in a chain of
+   struct command_line's, which is then returned.  For input from a
+   terminal, the special command "end" is used to mark the end of the
+   input, and is not included in the returned chain of commands. */
+
+#define END_MESSAGE "End with a line saying just \"end\"."
+
+struct command_line *
+read_command_lines (prompt, from_tty)
+char *prompt;
+int from_tty;
+{
+  struct command_line *head, *tail, *next;
+  struct cleanup *old_chain;
+  enum command_control_type ret;
+  enum misc_command_type val;
+
+  if (readline_begin_hook)
+    {
+      /* Note - intentional to merge messages with no newline */
+      (*readline_begin_hook) ("%s  %s\n", prompt, END_MESSAGE);
+    }
+  else if (from_tty && input_from_terminal_p ())
+    {
+      printf_unfiltered ("%s\n%s\n", prompt, END_MESSAGE);
+      gdb_flush (gdb_stdout);
+    }
+
+  head = tail = NULL;
+  old_chain = NULL;
+
+  while (1)
+    {
+      val = read_next_line (&next);
+
+      /* Ignore blank lines or comments.  */
+      if (val == nop_command)
+	continue;
+
+      if (val == end_command)
+	{
+	  ret = simple_control;
+	  break;
+	}
+
+      if (val != ok_command)
+	{
+	  ret = invalid_control;
+	  break;
+	}
+
+      if (next->control_type == while_control
+	  || next->control_type == if_control)
+	{
+	  control_level++;
+	  ret = recurse_read_control_structure (next);
+	  control_level--;
+
+	  if (ret == invalid_control)
+	    break;
+	}
+      
+      if (tail)
+	{
+	  tail->next = next;
+	}
+      else
+	{
+	  head = next;
+	  old_chain = make_cleanup ((make_cleanup_func) free_command_lines, 
+                                    &head);
+	}
+      tail = next;
+    }
+
+  dont_repeat ();
+
+  if (head)
+    {
+      if (ret != invalid_control)
+	{
+	  discard_cleanups (old_chain);
+	}
+      else
+	do_cleanups (old_chain);
+    }
+
+  if (readline_end_hook)
+    {
+      (*readline_end_hook) ();
+    }
+  return (head);
+}
+
+/* Free a chain of struct command_line's.  */
+
+void
+free_command_lines (lptr)
+      struct command_line **lptr;
+{
+  register struct command_line *l = *lptr;
+  register struct command_line *next;
+  struct command_line **blist;
+  int i;
+
+  while (l)
+    {
+      if (l->body_count > 0)
+	{
+	  blist = l->body_list;
+	  for (i = 0; i < l->body_count; i++, blist++)
+	    free_command_lines (blist);
+	}
+      next = l->next;
+      free (l->line);
+      free ((PTR)l);
+      l = next;
+    }
+}
+
+/* Add an element to the list of info subcommands.  */
+
+void
+add_info (name, fun, doc)
+     char *name;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+{
+  add_cmd (name, no_class, fun, doc, &infolist);
+}
+
+/* Add an alias to the list of info subcommands.  */
+
+void
+add_info_alias (name, oldname, abbrev_flag)
+     char *name;
+     char *oldname;
+     int abbrev_flag;
+{
+  add_alias_cmd (name, oldname, 0, abbrev_flag, &infolist);
+}
+
+/* The "info" command is defined as a prefix, with allow_unknown = 0.
+   Therefore, its own definition is called only for "info" with no args.  */
+
+/* ARGSUSED */
+static void
+info_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered ("\"info\" must be followed by the name of an info command.\n");
+  help_list (infolist, "info ", -1, gdb_stdout);
+}
+
+/* The "complete" command is used by Emacs to implement completion.  */
+
+/* ARGSUSED */
+static void
+complete_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  int i;
+  int argpoint;
+  char *completion;
+
+  dont_repeat ();
+
+  if (arg == NULL)
+    arg = "";
+  argpoint = strlen (arg);
+
+  for (completion = line_completion_function (arg, i = 0, arg, argpoint);
+       completion;
+       completion = line_completion_function (arg, ++i, arg, argpoint))
+    {
+      printf_unfiltered ("%s\n", completion);
+      free (completion);
+    }
+}
+
+/* The "show" command with no arguments shows all the settings.  */
+
+/* ARGSUSED */
+static void
+show_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  cmd_show_list (showlist, from_tty, "");
+}
+
+/* Add an element to the list of commands.  */
+
+void
+add_com (name, class, fun, doc)
+     char *name;
+     enum command_class class;
+     void (*fun) PARAMS ((char *, int));
+     char *doc;
+{
+  add_cmd (name, class, fun, doc, &cmdlist);
+}
+
+/* Add an alias or abbreviation command to the list of commands.  */
+
+void
+add_com_alias (name, oldname, class, abbrev_flag)
+     char *name;
+     char *oldname;
+     enum command_class class;
+     int abbrev_flag;
+{
+  add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
+}
+
+void
+error_no_arg (why)
+     char *why;
+{
+  error ("Argument required (%s).", why);
+}
+
+/* ARGSUSED */
+static void
+help_command (command, from_tty)
+     char *command;
+     int from_tty; /* Ignored */
+{
+  help_cmd (command, gdb_stdout);
+}
+
+static void
+validate_comname (comname)
+     char *comname;
+{
+  register char *p;
+
+  if (comname == 0)
+    error_no_arg ("name of command to define");
+
+  p = comname;
+  while (*p)
+    {
+      if (!isalnum(*p) && *p != '-' && *p != '_')
+	error ("Junk in argument list: \"%s\"", p);
+      p++;
+    }
+}
+
+/* This is just a placeholder in the command data structures.  */
+static void
+user_defined_command (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+}
+
+static void
+define_command (comname, from_tty)
+     char *comname;
+     int from_tty;
+{
+  register struct command_line *cmds;
+  register struct cmd_list_element *c, *newc, *hookc = 0;
+  char *tem = comname;
+  char tmpbuf[128];
+#define	HOOK_STRING	"hook-"
+#define	HOOK_LEN 5
+
+  validate_comname (comname);
+
+  /* Look it up, and verify that we got an exact match.  */
+  c = lookup_cmd (&tem, cmdlist, "", -1, 1);
+  if (c && !STREQ (comname, c->name))
+    c = 0;
+
+  if (c)
+    {
+      if (c->class == class_user || c->class == class_alias)
+	tem = "Redefine command \"%s\"? ";
+      else
+	tem = "Really redefine built-in command \"%s\"? ";
+      if (!query (tem, c->name))
+	error ("Command \"%s\" not redefined.", c->name);
+    }
+
+  /* If this new command is a hook, then mark the command which it
+     is hooking.  Note that we allow hooking `help' commands, so that
+     we can hook the `stop' pseudo-command.  */
+
+  if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
+    {
+      /* Look up cmd it hooks, and verify that we got an exact match.  */
+      tem = comname+HOOK_LEN;
+      hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
+      if (hookc && !STREQ (comname+HOOK_LEN, hookc->name))
+	hookc = 0;
+      if (!hookc)
+	{
+	  warning ("Your new `%s' command does not hook any existing command.",
+		   comname);
+	  if (!query ("Proceed? "))
+	    error ("Not confirmed.");
+	}
+    }
+
+  comname = savestring (comname, strlen (comname));
+
+  /* If the rest of the commands will be case insensitive, this one
+     should behave in the same manner. */
+  for (tem = comname; *tem; tem++)
+    if (isupper(*tem)) *tem = tolower(*tem);
+
+  control_level = 0;
+  sprintf (tmpbuf, "Type commands for definition of \"%s\".", comname);
+  cmds = read_command_lines (tmpbuf, from_tty);
+
+  if (c && c->class == class_user)
+    free_command_lines (&c->user_commands);
+
+  newc = add_cmd (comname, class_user, user_defined_command,
+	   (c && c->class == class_user)
+	   ? c->doc : savestring ("User-defined.", 13), &cmdlist);
+  newc->user_commands = cmds;
+
+  /* If this new command is a hook, then mark both commands as being
+     tied.  */
+  if (hookc)
+    {
+      hookc->hook = newc;	/* Target gets hooked.  */
+      newc->hookee = hookc;	/* We are marked as hooking target cmd.  */
+    }
+}
+
+static void
+document_command (comname, from_tty)
+     char *comname;
+     int from_tty;
+{
+  struct command_line *doclines;
+  register struct cmd_list_element *c;
+  char *tem = comname;
+  char tmpbuf[128];
+
+  validate_comname (comname);
+
+  c = lookup_cmd (&tem, cmdlist, "", 0, 1);
+
+  if (c->class != class_user)
+    error ("Command \"%s\" is built-in.", comname);
+
+  sprintf (tmpbuf, "Type documentation for \"%s\".", comname);
+  doclines = read_command_lines (tmpbuf, from_tty);
+
+  if (c->doc) free (c->doc);
+
+  {
+    register struct command_line *cl1;
+    register int len = 0;
+
+    for (cl1 = doclines; cl1; cl1 = cl1->next)
+      len += strlen (cl1->line) + 1;
+
+    c->doc = (char *) xmalloc (len + 1);
+    *c->doc = 0;
+
+    for (cl1 = doclines; cl1; cl1 = cl1->next)
+      {
+	strcat (c->doc, cl1->line);
+	if (cl1->next)
+	  strcat (c->doc, "\n");
+      }
+  }
+
+  free_command_lines (&doclines);
+}
+
+/* Print the GDB banner. */
+void
+print_gdb_version (stream)
+  GDB_FILE *stream;
+{
+  /* From GNU coding standards, first line is meant to be easy for a
+     program to parse, and is just canonical program name and version
+     number, which starts after last space. */
+
+  fprintf_filtered (stream, "GNU gdb %s\n", version);
+
+  /* Second line is a copyright notice. */
+
+  fprintf_filtered (stream, "Copyright 1998 Free Software Foundation, Inc.\n");
+
+  /* Following the copyright is a brief statement that the program is
+     free software, that users are free to copy and change it on
+     certain conditions, that it is covered by the GNU GPL, and that
+     there is no warranty. */
+
+  fprintf_filtered (stream, "\
+GDB is free software, covered by the GNU General Public License, and you are\n\
+welcome to change it and/or distribute copies of it under certain conditions.\n\
+Type \"show copying\" to see the conditions.\n\
+There is absolutely no warranty for GDB.  Type \"show warranty\" for details.\n");
+
+  /* After the required info we print the configuration information. */
+
+  fprintf_filtered (stream, "This GDB was configured as \"");
+  if (!STREQ (host_name, target_name))
+    {
+      fprintf_filtered (stream, "--host=%s --target=%s", host_name, target_name);
+    }
+  else
+    {
+      fprintf_filtered (stream, "%s", host_name);
+    }
+  fprintf_filtered (stream, "\".");
+}
+
+/* ARGSUSED */
+static void
+show_version (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  immediate_quit++;
+  print_gdb_version (gdb_stdout);
+  printf_filtered ("\n");
+  immediate_quit--;
+}
+
+/* xgdb calls this to reprint the usual GDB prompt.  Obsolete now that xgdb
+   is obsolete.  */
+
+void
+print_prompt ()
+{
+  printf_unfiltered ("%s", prompt);
+  gdb_flush (gdb_stdout);
+}
+
+/* This replaces the above for the frontends: it returns a pointer
+   to the prompt. */
+char *
+get_prompt ()
+{
+  return prompt;
+}
+
+void
+set_prompt (s)
+     char *s;
+{
+/* ??rehrauer: I don't know why this fails, since it looks as though
+   assignments to prompt are wrapped in calls to savestring...
+  if (prompt != NULL)
+    free (prompt);
+*/
+  prompt = savestring (s, strlen (s));
+}
+
+
+/* If necessary, make the user confirm that we should quit.  Return
+   non-zero if we should quit, zero if we shouldn't.  */
+
+int
+quit_confirm ()
+{
+  if (inferior_pid != 0 && target_has_execution)
+    {
+      char *s;
+
+      /* This is something of a hack.  But there's no reliable way to
+	 see if a GUI is running.  The `use_windows' variable doesn't
+	 cut it.  */
+      if (init_ui_hook)
+	s = "A debugging session is active.\nDo you still want to close the debugger?";
+      else if (attach_flag)
+	s = "The program is running.  Quit anyway (and detach it)? ";
+      else
+	s = "The program is running.  Exit anyway? ";
+
+      if (! query (s))
+	return 0;
+    }
+
+  return 1;
+}
+
+/* Quit without asking for confirmation.  */
+
+void
+quit_force (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int exit_code = 0;
+
+  /* An optional expression may be used to cause gdb to terminate with the 
+     value of that expression. */
+  if (args)
+    {
+      value_ptr val = parse_and_eval (args);
+
+      exit_code = (int) value_as_long (val);
+    }
+
+  if (inferior_pid != 0 && target_has_execution)
+    {
+      if (attach_flag)
+	target_detach (args, from_tty);
+      else
+	target_kill ();
+    }
+
+  /* UDI wants this, to kill the TIP.  */
+  target_close (1);
+
+  /* Save the history information if it is appropriate to do so.  */
+  if (write_history_p && history_filename)
+    write_history (history_filename);
+
+  do_final_cleanups(ALL_CLEANUPS);	/* Do any final cleanups before exiting */
+
+#if defined(TUI)
+  /* tuiDo((TuiOpaqueFuncPtr)tuiCleanUp); */
+  /* The above does not need to be inside a tuiDo(), since
+   * it is not manipulating the curses screen, but rather,
+   * it is tearing it down.
+   */
+  if (tui_version)
+    tuiCleanUp();
+#endif
+
+  exit (exit_code);
+}
+
+/* Handle the quit command.  */
+
+void
+quit_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (! quit_confirm ())
+    error ("Not confirmed.");
+  quit_force (args, from_tty);
+}
+
+/* Returns whether GDB is running on a terminal and whether the user
+   desires that questions be asked of them on that terminal.  */
+
+int
+input_from_terminal_p ()
+{
+  return gdb_has_a_terminal () && (instream == stdin) & caution;
+}
+
+/* ARGSUSED */
+static void
+pwd_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args) error ("The \"pwd\" command does not take an argument: %s", args);
+  getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+
+  if (!STREQ (gdb_dirbuf, current_directory))
+    printf_unfiltered ("Working directory %s\n (canonically %s).\n",
+	    current_directory, gdb_dirbuf);
+  else
+    printf_unfiltered ("Working directory %s.\n", current_directory);
+}
+
+void
+cd_command (dir, from_tty)
+     char *dir;
+     int from_tty;
+{
+  int len;
+  /* Found something other than leading repetitions of "/..".  */
+  int found_real_path;
+  char *p;
+
+  /* If the new directory is absolute, repeat is a no-op; if relative,
+     repeat might be useful but is more likely to be a mistake.  */
+  dont_repeat ();
+
+  if (dir == 0)
+    error_no_arg ("new working directory");
+
+  dir = tilde_expand (dir);
+  make_cleanup (free, dir);
+
+  if (chdir (dir) < 0)
+    perror_with_name (dir);
+
+  len = strlen (dir);
+  dir = savestring (dir, len - (len > 1 && SLASH_P(dir[len-1])));
+  if (ROOTED_P(dir))
+    current_directory = dir;
+  else
+    {
+      if (SLASH_P (current_directory[0]) && current_directory[1] == '\0')
+	current_directory = concat (current_directory, dir, NULL);
+      else
+	current_directory = concat (current_directory, SLASH_STRING, dir, NULL);
+      free (dir);
+    }
+
+  /* Now simplify any occurrences of `.' and `..' in the pathname.  */
+
+  found_real_path = 0;
+  for (p = current_directory; *p;)
+    {
+      if (SLASH_P (p[0]) && p[1] == '.' && (p[2] == 0 || SLASH_P (p[2])))
+	strcpy (p, p + 2);
+      else if (SLASH_P (p[0]) && p[1] == '.' && p[2] == '.'
+	       && (p[3] == 0 || SLASH_P (p[3])))
+	{
+	  if (found_real_path)
+	    {
+	      /* Search backwards for the directory just before the "/.."
+		 and obliterate it and the "/..".  */
+	      char *q = p;
+	      while (q != current_directory && ! SLASH_P (q[-1]))
+		--q;
+
+	      if (q == current_directory)
+		/* current_directory is
+		   a relative pathname ("can't happen"--leave it alone).  */
+		++p;
+	      else
+		{
+		  strcpy (q - 1, p + 3);
+		  p = q - 1;
+		}
+	    }
+	  else
+	    /* We are dealing with leading repetitions of "/..", for example
+	       "/../..", which is the Mach super-root.  */
+	    p += 3;
+	}
+      else
+	{
+	  found_real_path = 1;
+	  ++p;
+	}
+    }
+
+  forget_cached_source_info ();
+
+  if (from_tty)
+    pwd_command ((char *) 0, 1);
+}
+
+struct source_cleanup_lines_args {
+  int old_line;
+  char *old_file;
+  char *old_pre_error;
+  char *old_error_pre_print;
+};
+
+static void
+source_cleanup_lines (args)
+     PTR args;
+{
+  struct source_cleanup_lines_args *p =
+    (struct source_cleanup_lines_args *)args;
+  source_line_number = p->old_line;
+  source_file_name = p->old_file;
+  source_pre_error = p->old_pre_error;
+  error_pre_print = p->old_error_pre_print;
+}
+
+/* ARGSUSED */
+void
+source_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  FILE *stream;
+  struct cleanup *old_cleanups;
+  char *file = args;
+  struct source_cleanup_lines_args old_lines;
+  int needed_length;
+
+  if (file == NULL)
+    {
+      error ("source command requires pathname of file to source.");
+    }
+
+  file = tilde_expand (file);
+  old_cleanups = make_cleanup (free, file);
+
+  stream = fopen (file, FOPEN_RT);
+  if (!stream)
+    if (from_tty)
+      perror_with_name (file);
+    else
+      return;
+
+  make_cleanup ((make_cleanup_func) fclose, stream);
+
+  old_lines.old_line = source_line_number;
+  old_lines.old_file = source_file_name;
+  old_lines.old_pre_error = source_pre_error;
+  old_lines.old_error_pre_print = error_pre_print;
+  make_cleanup (source_cleanup_lines, &old_lines);
+  source_line_number = 0;
+  source_file_name = file;
+  source_pre_error = error_pre_print == NULL ? "" : error_pre_print;
+  source_pre_error = savestring (source_pre_error, strlen (source_pre_error));
+  make_cleanup (free, source_pre_error);
+  /* This will get set every time we read a line.  So it won't stay "" for
+     long.  */
+  error_pre_print = "";
+
+  needed_length = strlen (source_file_name) + strlen (source_pre_error) + 80;
+  if (source_error_allocated < needed_length)
+    {
+      source_error_allocated *= 2;
+      if (source_error_allocated < needed_length)
+	source_error_allocated = needed_length;
+      if (source_error == NULL)
+	source_error = xmalloc (source_error_allocated);
+      else
+	source_error = xrealloc (source_error, source_error_allocated);
+    }
+
+  read_command_file (stream);
+
+  do_cleanups (old_cleanups);
+}
+
+/* ARGSUSED */
+static void
+echo_command (text, from_tty)
+     char *text;
+     int from_tty;
+{
+  char *p = text;
+  register int c;
+
+  if (text)
+    while ((c = *p++) != '\0')
+      {
+	if (c == '\\')
+	  {
+	    /* \ at end of argument is used after spaces
+	       so they won't be lost.  */
+	    if (*p == 0)
+	      return;
+
+	    c = parse_escape (&p);
+	    if (c >= 0)
+	      printf_filtered ("%c", c);
+	  }
+	else
+	  printf_filtered ("%c", c);
+      }
+
+  /* Force this output to appear now.  */
+  wrap_here ("");
+  gdb_flush (gdb_stdout);
+}
+
+/* ARGSUSED */
+static void
+dont_repeat_command (ignored, from_tty)
+     char *ignored;
+     int from_tty;
+{
+  *line = 0;		/* Can't call dont_repeat here because we're not
+			   necessarily reading from stdin.  */
+}
+
+/* Functions to manipulate command line editing control variables.  */
+
+/* Number of commands to print in each call to show_commands.  */
+#define Hist_print 10
+static void
+show_commands (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  /* Index for history commands.  Relative to history_base.  */
+  int offset;
+
+  /* Number of the history entry which we are planning to display next.
+     Relative to history_base.  */
+  static int num = 0;
+
+  /* The first command in the history which doesn't exist (i.e. one more
+     than the number of the last command).  Relative to history_base.  */
+  int hist_len;
+
+  extern HIST_ENTRY *history_get PARAMS ((int));
+
+  /* Print out some of the commands from the command history.  */
+  /* First determine the length of the history list.  */
+  hist_len = history_size;
+  for (offset = 0; offset < history_size; offset++)
+    {
+      if (!history_get (history_base + offset))
+	{
+	  hist_len = offset;
+	  break;
+	}
+    }
+
+  if (args)
+    {
+      if (args[0] == '+' && args[1] == '\0')
+	/* "info editing +" should print from the stored position.  */
+	;
+      else
+	/* "info editing <exp>" should print around command number <exp>.  */
+	num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
+    }
+  /* "show commands" means print the last Hist_print commands.  */
+  else
+    {
+      num = hist_len - Hist_print;
+    }
+
+  if (num < 0)
+    num = 0;
+
+  /* If there are at least Hist_print commands, we want to display the last
+     Hist_print rather than, say, the last 6.  */
+  if (hist_len - num < Hist_print)
+    {
+      num = hist_len - Hist_print;
+      if (num < 0)
+	num = 0;
+    }
+
+  for (offset = num; offset < num + Hist_print && offset < hist_len; offset++)
+    {
+      printf_filtered ("%5d  %s\n", history_base + offset,
+	      (history_get (history_base + offset))->line);
+    }
+
+  /* The next command we want to display is the next one that we haven't
+     displayed yet.  */
+  num += Hist_print;
+
+  /* If the user repeats this command with return, it should do what
+     "show commands +" does.  This is unnecessary if arg is null,
+     because "show commands +" is not useful after "show commands".  */
+  if (from_tty && args)
+    {
+      args[0] = '+';
+      args[1] = '\0';
+    }
+}
+
+/* Called by do_setshow_command.  */
+/* ARGSUSED */
+static void
+set_history_size_command (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  if (history_size == INT_MAX)
+    unstifle_history ();
+  else if (history_size >= 0)
+    stifle_history (history_size);
+  else
+    {
+      history_size = INT_MAX;
+      error ("History size must be non-negative");
+    }
+}
+
+/* ARGSUSED */
+static void
+set_history (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
+  help_list (sethistlist, "set history ", -1, gdb_stdout);
+}
+
+/* ARGSUSED */
+static void
+show_history (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  cmd_show_list (showhistlist, from_tty, "");
+}
+
+int info_verbose = 0;		/* Default verbose msgs off */
+
+/* Called by do_setshow_command.  An elaborate joke.  */
+/* ARGSUSED */
+static void
+set_verbose (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  char *cmdname = "verbose";
+  struct cmd_list_element *showcmd;
+
+  showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
+
+  if (info_verbose)
+    {
+      c->doc = "Set verbose printing of informational messages.";
+      showcmd->doc = "Show verbose printing of informational messages.";
+    }
+  else
+    {
+      c->doc = "Set verbosity.";
+      showcmd->doc = "Show verbosity.";
+    }
+}
+
+static void
+float_handler (signo)
+int signo;
+{
+  /* This message is based on ANSI C, section 4.7.  Note that integer
+     divide by zero causes this, so "float" is a misnomer.  */
+  signal (SIGFPE, float_handler);
+  error ("Erroneous arithmetic operation.");
+}
+
+
+static void
+init_cmd_lists ()
+{
+  cmdlist = NULL;
+  infolist = NULL;
+  enablelist = NULL;
+  disablelist = NULL;
+  togglelist = NULL;
+  stoplist = NULL;
+  deletelist = NULL;
+  enablebreaklist = NULL;
+  setlist = NULL;
+  unsetlist = NULL;
+  showlist = NULL;
+  sethistlist = NULL;
+  showhistlist = NULL;
+  unsethistlist = NULL;
+#if MAINTENANCE_CMDS
+  maintenancelist = NULL;
+  maintenanceinfolist = NULL;
+  maintenanceprintlist = NULL;
+#endif
+  setprintlist = NULL;
+  showprintlist = NULL;
+  setchecklist = NULL;
+  showchecklist = NULL;
+}
+
+/* Init the history buffer.  Note that we are called after the init file(s)
+ * have been read so that the user can change the history file via his
+ * .gdbinit file (for instance).  The GDBHISTFILE environment variable
+ * overrides all of this.
+ */
+
+void
+init_history()
+{
+  char *tmpenv;
+
+  tmpenv = getenv ("HISTSIZE");
+  if (tmpenv)
+    history_size = atoi (tmpenv);
+  else if (!history_size)
+    history_size = 256;
+
+  stifle_history (history_size);
+
+  tmpenv = getenv ("GDBHISTFILE");
+  if (tmpenv)
+    history_filename = savestring (tmpenv, strlen(tmpenv));
+  else if (!history_filename) {
+    /* We include the current directory so that if the user changes
+       directories the file written will be the same as the one
+       that was read.  */
+    history_filename = concat (current_directory, "/.gdb_history", NULL);
+  }
+  read_history (history_filename);
+}
+
+static void
+init_main ()
+{
+  struct cmd_list_element *c;
+
+#ifdef DEFAULT_PROMPT
+  prompt = savestring (DEFAULT_PROMPT, strlen(DEFAULT_PROMPT));
+#else
+  prompt = savestring ("(gdb) ", 6);
+#endif
+
+  /* Set the important stuff up for command editing.  */
+  command_editing_p = 1;
+  history_expansion_p = 0;
+  write_history_p = 0;
+
+  /* Setup important stuff for command line editing.  */
+  rl_completion_entry_function = (int (*)()) readline_line_completion_function;
+  rl_completer_word_break_characters = gdb_completer_word_break_characters;
+  rl_completer_quote_characters = gdb_completer_quote_characters;
+  rl_readline_name = "gdb";
+
+  /* Define the classes of commands.
+     They will appear in the help list in the reverse of this order.  */
+
+  add_cmd ("internals", class_maintenance, NO_FUNCTION,
+	   "Maintenance commands.\n\
+Some gdb commands are provided just for use by gdb maintainers.\n\
+These commands are subject to frequent change, and may not be as\n\
+well documented as user commands.",
+	   &cmdlist);
+  add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
+  add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
+  add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
+The commands in this class are those defined by the user.\n\
+Use the \"define\" command to define a command.", &cmdlist);
+  add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
+  if (!dbx_commands)
+    add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
+  add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
+  add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
+  add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
+  add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
+The stack is made up of stack frames.  Gdb assigns numbers to stack frames\n\
+counting from zero for the innermost (currently executing) frame.\n\n\
+At any time gdb identifies one frame as the \"selected\" frame.\n\
+Variable lookups are done with respect to the selected frame.\n\
+When the program being debugged stops, gdb selects the innermost frame.\n\
+The commands below can be used to select other frames by number or address.",
+	   &cmdlist);
+  add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
+
+  add_com ("pwd", class_files, pwd_command,
+	   "Print working directory.  This is used for your program as well.");
+  c = add_cmd ("cd", class_files, cd_command,
+	   "Set working directory to DIR for debugger and program being debugged.\n\
+The change does not take effect for the program being debugged\n\
+until the next time it is started.", &cmdlist);
+  c->completer = filename_completer;
+
+  add_show_from_set
+    (add_set_cmd ("prompt", class_support, var_string, (char *)&prompt,
+	   "Set gdb's prompt",
+	   &setlist),
+     &showlist);
+
+  add_com ("echo", class_support, echo_command,
+	   "Print a constant string.  Give string as argument.\n\
+C escape sequences may be used in the argument.\n\
+No newline is added at the end of the argument;\n\
+use \"\\n\" if you want a newline to be printed.\n\
+Since leading and trailing whitespace are ignored in command arguments,\n\
+if you want to print some you must use \"\\\" before leading whitespace\n\
+to be printed or after trailing whitespace.");
+  add_com ("document", class_support, document_command,
+	   "Document a user-defined command.\n\
+Give command name as argument.  Give documentation on following lines.\n\
+End with a line of just \"end\".");
+  add_com ("define", class_support, define_command,
+	   "Define a new command name.  Command name is argument.\n\
+Definition appears on following lines, one command per line.\n\
+End with a line of just \"end\".\n\
+Use the \"document\" command to give documentation for the new command.\n\
+Commands defined in this way may have up to ten arguments.");
+
+#ifdef __STDC__
+  c = add_cmd ("source", class_support, source_command,
+	   "Read commands from a file named FILE.\n\
+Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#else
+  /* Punt file name, we can't help it easily.  */
+  c = add_cmd ("source", class_support, source_command,
+	   "Read commands from a file named FILE.\n\
+Note that the file \".gdbinit\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#endif
+  c->completer = filename_completer;
+
+  add_com ("quit", class_support, quit_command, "Exit gdb.");
+  add_com ("help", class_support, help_command, "Print list of commands.");
+  add_com_alias ("q", "quit", class_support, 1);
+  add_com_alias ("h", "help", class_support, 1);
+
+  add_com ("dont-repeat", class_support, dont_repeat_command, "Don't repeat this command.\n\
+Primarily used inside of user-defined commands that should not be repeated when\n\
+hitting return.");
+
+  c = add_set_cmd ("verbose", class_support, var_boolean, (char *)&info_verbose,
+		   "Set ",
+		   &setlist),
+  add_show_from_set (c, &showlist);
+  c->function.sfunc = set_verbose;
+  set_verbose (NULL, 0, c);
+
+  add_show_from_set
+    (add_set_cmd ("editing", class_support, var_boolean, (char *)&command_editing_p,
+	   "Set editing of command lines as they are typed.\n\
+Use \"on\" to enable the editing, and \"off\" to disable it.\n\
+Without an argument, command line editing is enabled.  To edit, use\n\
+EMACS-like or VI-like commands like control-P or ESC.", &setlist),
+     &showlist);
+
+  add_prefix_cmd ("history", class_support, set_history,
+		  "Generic command for setting command history parameters.",
+		  &sethistlist, "set history ", 0, &setlist);
+  add_prefix_cmd ("history", class_support, show_history,
+		  "Generic command for showing command history parameters.",
+		  &showhistlist, "show history ", 0, &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("expansion", no_class, var_boolean, (char *)&history_expansion_p,
+	   "Set history expansion on command input.\n\
+Without an argument, history expansion is enabled.", &sethistlist),
+     &showhistlist);
+
+  add_show_from_set
+    (add_set_cmd ("save", no_class, var_boolean, (char *)&write_history_p,
+	   "Set saving of the history record on exit.\n\
+Use \"on\" to enable the saving, and \"off\" to disable it.\n\
+Without an argument, saving is enabled.", &sethistlist),
+     &showhistlist);
+
+  c = add_set_cmd ("size", no_class, var_integer, (char *)&history_size,
+		   "Set the size of the command history, \n\
+ie. the number of previous commands to keep a record of.", &sethistlist);
+  add_show_from_set (c, &showhistlist);
+  c->function.sfunc = set_history_size_command;
+
+  add_show_from_set
+    (add_set_cmd ("filename", no_class, var_filename, (char *)&history_filename,
+	   "Set the filename in which to record the command history\n\
+ (the list of previous commands of which a record is kept).", &sethistlist),
+     &showhistlist);
+
+  add_show_from_set
+    (add_set_cmd ("confirm", class_support, var_boolean,
+		  (char *)&caution,
+		  "Set whether to confirm potentially dangerous operations.",
+		  &setlist),
+     &showlist);
+
+  add_prefix_cmd ("info", class_info, info_command,
+        "Generic command for showing things about the program being debugged.",
+		  &infolist, "info ", 0, &cmdlist);
+  add_com_alias ("i", "info", class_info, 1);
+
+  add_com ("complete", class_obscure, complete_command,
+	   "List the completions for the rest of the line as a command.");
+
+  add_prefix_cmd ("show", class_info, show_command,
+		  "Generic command for showing things about the debugger.",
+		  &showlist, "show ", 0, &cmdlist);
+  /* Another way to get at the same thing.  */
+  add_info ("set", show_command, "Show all GDB settings.");
+
+  add_cmd ("commands", no_class, show_commands,
+	   "Show the history of commands you typed.\n\
+You can supply a command number to start with, or a `+' to start after\n\
+the previous command number shown.",
+	   &showlist);
+
+  add_cmd ("version", no_class, show_version,
+	   "Show what version of GDB this is.", &showlist);
+
+  add_com ("while", class_support, while_command,
+"Execute nested commands WHILE the conditional expression is non zero.\n\
+The conditional expression must follow the word `while' and must in turn be\n\
+followed by a new line.  The nested commands must be entered one per line,\n\
+and should be terminated by the word `end'.");
+
+  add_com ("if", class_support, if_command,
+"Execute nested commands once IF the conditional expression is non zero.\n\
+The conditional expression must follow the word `if' and must in turn be\n\
+followed by a new line.  The nested commands must be entered one per line,\n\
+and should be terminated by the word 'else' or `end'.  If an else clause\n\
+is used, the same rules apply to its nested commands as to the first ones.");
+
+  /* If target is open when baud changes, it doesn't take effect until the
+     next open (I think, not sure).  */
+  add_show_from_set (add_set_cmd ("remotebaud", no_class,
+				  var_zinteger, (char *)&baud_rate,
+				  "Set baud rate for remote serial I/O.\n\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets.", &setlist),
+		     &showlist);
+
+  add_show_from_set (
+    add_set_cmd ("remotedebug", no_class, var_zinteger, (char *)&remote_debug,
+		   "Set debugging of remote protocol.\n\
+When enabled, each packet sent or received with the remote target\n\
+is displayed.", &setlist),
+		     &showlist);
+
+  add_show_from_set (
+    add_set_cmd ("remotetimeout", no_class, var_integer, (char *)&remote_timeout,
+		   "Set timeout limit to wait for target to respond.\n\
+This value is used to set the time limit for gdb to wait for a response\n\
+from the target.", &setlist),
+		     &showlist);
+
+  c = add_set_cmd ("annotate", class_obscure, var_zinteger, 
+		   (char *)&annotation_level, "Set annotation_level.\n\
+0 == normal;     1 == fullname (for use when running under emacs)\n\
+2 == output annotated suitably for use by programs that control GDB.",
+		 &setlist);
+  c = add_show_from_set (c, &showlist);
+}
diff --git a/gdb/top.h b/gdb/top.h
new file mode 100644
index 0000000..fe7002b
--- /dev/null
+++ b/gdb/top.h
@@ -0,0 +1,67 @@
+/* Top level stuff for GDB, the GNU debugger.
+   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* From top.c.  */
+extern char *line;
+extern int linesize;
+extern FILE *instream;
+extern char gdb_dirbuf[1024];
+extern int inhibit_gdbinit;
+extern int epoch_interface;
+extern char gdbinit[];
+
+/* Generally one should use catch_errors rather than manipulating these
+   directly.  The exception is main().  */
+#if defined(HAVE_SIGSETJMP)
+#define SIGJMP_BUF		sigjmp_buf
+#define SIGSETJMP(buf)		sigsetjmp(buf, 1)
+#define SIGLONGJMP(buf,val)	siglongjmp(buf,val)
+#else
+#define SIGJMP_BUF		jmp_buf
+#define SIGSETJMP(buf)		setjmp(buf)
+#define SIGLONGJMP(buf,val)	longjmp(buf,val)
+#endif
+
+extern SIGJMP_BUF error_return;
+extern SIGJMP_BUF quit_return;
+
+extern void print_gdb_version PARAMS ((GDB_FILE *));
+
+extern void source_command PARAMS ((char *, int));
+extern void cd_command PARAMS ((char *, int));
+extern void read_command_file PARAMS ((FILE *));
+extern void init_history PARAMS ((void));
+extern void command_loop PARAMS ((void));
+extern int quit_confirm PARAMS ((void));
+extern void quit_force PARAMS ((char *, int));
+extern void quit_command PARAMS ((char *, int));
+
+/* This function returns a pointer to the string that is used
+   by gdb for its command prompt. */
+extern char *get_prompt PARAMS((void));
+ 
+/* This function copies the specified string into the string that
+   is used by gdb for its command prompt. */
+extern void set_prompt PARAMS ((char *));
+
+/* From random places.  */
+extern int mapped_symbol_files;
+extern int readnow_symbol_files;
+#define	ALL_CLEANUPS	((struct cleanup *)0)
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
new file mode 100644
index 0000000..9f03617
--- /dev/null
+++ b/gdb/tracepoint.c
@@ -0,0 +1,2780 @@
+/* Tracing functionality for remote targets in custom GDB protocol
+   Copyright 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "frame.h"
+#include "tracepoint.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "gdbcmd.h"
+#include "value.h"
+#include "target.h"
+#include "language.h"
+#include "gdb_string.h"
+
+#include "ax.h"
+#include "ax-gdb.h"
+
+/* readline include files */
+#include <readline/readline.h>
+#include <readline/history.h>
+
+/* readline defines this.  */
+#undef savestring
+
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+/* maximum length of an agent aexpression.
+   this accounts for the fact that packets are limited to 400 bytes
+   (which includes everything -- including the checksum), and assumes
+   the worst case of maximum length for each of the pieces of a
+   continuation packet.
+   
+   NOTE: expressions get mem2hex'ed otherwise this would be twice as
+   large.  (400 - 31)/2 == 184 */
+#define MAX_AGENT_EXPR_LEN	184
+
+
+extern int info_verbose;
+extern void (*readline_begin_hook) PARAMS ((char *, ...));
+extern char * (*readline_hook) PARAMS ((char *));
+extern void (*readline_end_hook) PARAMS ((void));
+extern void x_command PARAMS ((char *, int));
+extern int addressprint;		/* Print machine addresses? */
+
+/* If this definition isn't overridden by the header files, assume
+   that isatty and fileno exist on this system.  */
+#ifndef ISATTY
+#define ISATTY(FP)	(isatty (fileno (FP)))
+#endif
+
+/* 
+   Tracepoint.c:
+
+   This module defines the following debugger commands:
+   trace            : set a tracepoint on a function, line, or address.
+   info trace       : list all debugger-defined tracepoints.
+   delete trace     : delete one or more tracepoints.
+   enable trace     : enable one or more tracepoints.
+   disable trace    : disable one or more tracepoints.
+   actions          : specify actions to be taken at a tracepoint.
+   passcount        : specify a pass count for a tracepoint.
+   tstart           : start a trace experiment.
+   tstop            : stop a trace experiment.
+   tstatus          : query the status of a trace experiment.
+   tfind            : find a trace frame in the trace buffer.
+   tdump            : print everything collected at the current tracepoint.
+   save-tracepoints : write tracepoint setup into a file.
+
+   This module defines the following user-visible debugger variables:
+   $trace_frame : sequence number of trace frame currently being debugged.
+   $trace_line  : source line of trace frame currently being debugged.
+   $trace_file  : source file of trace frame currently being debugged.
+   $tracepoint  : tracepoint number of trace frame currently being debugged.
+   */
+
+
+/* ======= Important global variables: ======= */
+
+/* Chain of all tracepoints defined.  */
+struct tracepoint *tracepoint_chain;
+
+/* Number of last tracepoint made.  */
+static int tracepoint_count;
+
+/* Number of last traceframe collected.  */
+static int traceframe_number;
+
+/* Tracepoint for last traceframe collected.  */
+static int tracepoint_number;
+
+/* Symbol for function for last traceframe collected */
+static struct symbol *traceframe_fun;
+
+/* Symtab and line for last traceframe collected */
+static struct symtab_and_line traceframe_sal;
+
+/* Tracing command lists */
+static struct cmd_list_element *tfindlist;
+
+/* ======= Important command functions: ======= */
+static void trace_command                 PARAMS ((char *, int));
+static void tracepoints_info              PARAMS ((char *, int));
+static void delete_trace_command          PARAMS ((char *, int));
+static void enable_trace_command          PARAMS ((char *, int));
+static void disable_trace_command         PARAMS ((char *, int));
+static void trace_pass_command            PARAMS ((char *, int));
+static void trace_actions_command         PARAMS ((char *, int));
+static void trace_start_command           PARAMS ((char *, int));
+static void trace_stop_command            PARAMS ((char *, int));
+static void trace_status_command          PARAMS ((char *, int));
+static void trace_find_command            PARAMS ((char *, int));
+static void trace_find_pc_command         PARAMS ((char *, int));
+static void trace_find_tracepoint_command PARAMS ((char *, int));
+static void trace_find_line_command       PARAMS ((char *, int));
+static void trace_find_range_command      PARAMS ((char *, int));
+static void trace_find_outside_command    PARAMS ((char *, int));
+static void tracepoint_save_command       PARAMS ((char *, int));
+static void trace_dump_command            PARAMS ((char *, int));
+
+/* support routines */
+static void trace_mention                 PARAMS ((struct tracepoint *));
+
+struct collection_list;
+static void add_aexpr PARAMS ((struct collection_list *, struct agent_expr *));
+static unsigned char *mem2hex(unsigned char *, unsigned char *, int);
+
+/* Utility: returns true if "target remote" */
+static int
+target_is_remote ()
+{
+  if (current_target.to_shortname &&
+      strcmp (current_target.to_shortname, "remote") == 0)
+    return 1;
+  else
+    return 0;
+}
+
+/* Utility: generate error from an incoming stub packet.  */
+static void 
+trace_error (buf)
+     char *buf;
+{
+  if (*buf++ != 'E')
+    return;			/* not an error msg */
+  switch (*buf) 
+    {
+    case '1':			/* malformed packet error */
+      if (*++buf == '0')	/*   general case: */
+	error ("tracepoint.c: error in outgoing packet.");
+      else
+	error ("tracepoint.c: error in outgoing packet at field #%d.", 
+	       strtol (buf, NULL, 16));
+    case '2':
+      error ("trace API error 0x%s.", ++buf);
+    default:
+      error ("Target returns error code '%s'.", buf);
+    }
+}
+
+/* Utility: wait for reply from stub, while accepting "O" packets */
+static char *
+remote_get_noisy_reply (buf)
+     char *buf;
+{
+  do	/* loop on reply from remote stub */
+    {
+      QUIT;				/* allow user to bail out with ^C */
+      getpkt (buf, 0);
+      if (buf[0] == 0)
+	error ("Target does not support this command.");
+      else if (buf[0] == 'E')
+	trace_error (buf);
+      else if (buf[0] == 'O' &&
+	       buf[1] != 'K')
+	remote_console_output (buf + 1);	/* 'O' message from stub */
+      else
+	return buf;				/* here's the actual reply */
+    } while (1);
+}
+
+/* Set tracepoint count to NUM.  */
+static void
+set_tracepoint_count (num)
+     int num;
+{
+  tracepoint_count = num;
+  set_internalvar (lookup_internalvar ("tpnum"),
+		   value_from_longest (builtin_type_int, (LONGEST) num));
+}
+
+/* Set traceframe number to NUM.  */
+static void
+set_traceframe_num (num)
+     int num;
+{
+  traceframe_number = num;
+  set_internalvar (lookup_internalvar ("trace_frame"),
+		   value_from_longest (builtin_type_int, (LONGEST) num));
+}
+
+/* Set tracepoint number to NUM.  */
+static void
+set_tracepoint_num (num)
+     int num;
+{
+  tracepoint_number = num;
+  set_internalvar (lookup_internalvar ("tracepoint"),
+		   value_from_longest (builtin_type_int, (LONGEST) num));
+}
+
+/* Set externally visible debug variables for querying/printing
+   the traceframe context (line, function, file) */
+
+static void
+set_traceframe_context (trace_pc)
+     CORE_ADDR trace_pc;
+{
+  static struct type *func_string, *file_string;
+  static struct type *func_range,  *file_range;
+  static value_ptr    func_val,     file_val;
+  static struct type *charstar;
+  int len;
+
+  if (charstar == (struct type *) NULL)
+    charstar = lookup_pointer_type (builtin_type_char);
+
+  if (trace_pc == -1)	/* cease debugging any trace buffers */
+    {
+      traceframe_fun = 0;
+      traceframe_sal.pc = traceframe_sal.line = 0;
+      traceframe_sal.symtab = NULL;
+      set_internalvar (lookup_internalvar ("trace_func"), 
+		       value_from_longest (charstar, (LONGEST) 0));
+      set_internalvar (lookup_internalvar ("trace_file"), 
+		       value_from_longest (charstar, (LONGEST) 0));
+      set_internalvar (lookup_internalvar ("trace_line"),
+		       value_from_longest (builtin_type_int, (LONGEST) -1));
+      return;
+    }
+
+  /* save as globals for internal use */
+  traceframe_sal = find_pc_line (trace_pc, 0);
+  traceframe_fun = find_pc_function (trace_pc);
+
+  /* save linenumber as "$trace_line", a debugger variable visible to users */
+  set_internalvar (lookup_internalvar ("trace_line"),
+		   value_from_longest (builtin_type_int, 
+				       (LONGEST) traceframe_sal.line));
+
+  /* save func name as "$trace_func", a debugger variable visible to users */
+  if (traceframe_fun == NULL || 
+      SYMBOL_NAME (traceframe_fun) == NULL)
+    set_internalvar (lookup_internalvar ("trace_func"), 
+		     value_from_longest (charstar, (LONGEST) 0));
+  else
+    {
+      len = strlen (SYMBOL_NAME (traceframe_fun));
+      func_range  = create_range_type (func_range,  
+				       builtin_type_int, 0, len - 1);
+      func_string = create_array_type (func_string, 
+				       builtin_type_char, func_range);
+      func_val = allocate_value (func_string);
+      VALUE_TYPE (func_val) = func_string;
+      memcpy (VALUE_CONTENTS_RAW (func_val), 
+	      SYMBOL_NAME (traceframe_fun), 
+	      len);
+      func_val->modifiable = 0;
+      set_internalvar (lookup_internalvar ("trace_func"), func_val);
+    }
+
+  /* save file name as "$trace_file", a debugger variable visible to users */
+  if (traceframe_sal.symtab == NULL || 
+      traceframe_sal.symtab->filename == NULL)
+    set_internalvar (lookup_internalvar ("trace_file"), 
+		     value_from_longest (charstar, (LONGEST) 0));
+  else
+    {
+      len = strlen (traceframe_sal.symtab->filename);
+      file_range  = create_range_type (file_range,  
+				       builtin_type_int, 0, len - 1);
+      file_string = create_array_type (file_string, 
+				       builtin_type_char, file_range);
+      file_val = allocate_value (file_string);
+      VALUE_TYPE (file_val) = file_string;
+      memcpy (VALUE_CONTENTS_RAW (file_val), 
+	      traceframe_sal.symtab->filename, 
+	      len);
+      file_val->modifiable = 0;
+      set_internalvar (lookup_internalvar ("trace_file"), file_val);
+    }
+}
+
+/* Low level routine to set a tracepoint.
+   Returns the tracepoint object so caller can set other things.
+   Does not set the tracepoint number!
+   Does not print anything.
+
+   ==> This routine should not be called if there is a chance of later
+   error(); otherwise it leaves a bogus tracepoint on the chain.  Validate
+   your arguments BEFORE calling this routine!  */
+
+static struct tracepoint *
+set_raw_tracepoint (sal)
+     struct symtab_and_line sal;
+{
+  register struct tracepoint *t, *tc;
+  struct cleanup *old_chain;
+
+  t = (struct tracepoint *) xmalloc (sizeof (struct tracepoint));
+  old_chain = make_cleanup (free, t);
+  memset (t, 0, sizeof (*t));
+  t->address = sal.pc;
+  if (sal.symtab == NULL)
+    t->source_file = NULL;
+  else
+    t->source_file = savestring (sal.symtab->filename, 
+				 strlen (sal.symtab->filename));
+
+  t->section     = sal.section;
+  t->language    = current_language->la_language;
+  t->input_radix = input_radix;
+  t->line_number = sal.line;
+  t->enabled     = enabled;
+  t->next        = 0;
+  t->step_count  = 0;
+  t->pass_count  = 0;
+  t->addr_string = NULL;
+
+  /* Add this tracepoint to the end of the chain
+     so that a list of tracepoints will come out in order
+     of increasing numbers.  */
+
+  tc = tracepoint_chain;
+  if (tc == 0)
+    tracepoint_chain = t;
+  else
+    {
+      while (tc->next)
+	tc = tc->next;
+      tc->next = t;
+    }
+  discard_cleanups (old_chain);
+  return t;
+}
+
+/* Set a tracepoint according to ARG (function, linenum or *address) */
+static void
+trace_command (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  char **canonical = (char **)NULL;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  struct tracepoint *t;
+  char *addr_start = 0, *addr_end = 0;
+  int i;
+
+  if (!arg || !*arg)
+    error ("trace command requires an argument");
+
+  if (from_tty && info_verbose)
+    printf_filtered ("TRACE %s\n", arg);
+
+  addr_start = arg;
+  sals = decode_line_1 (&arg, 1, (struct symtab *)NULL, 0, &canonical);
+  addr_end   = arg;
+  if (! sals.nelts) 
+    return;	/* ??? Presumably decode_line_1 has already warned? */
+
+  /* Resolve all line numbers to PC's */
+  for (i = 0; i < sals.nelts; i++)
+    resolve_sal_pc (&sals.sals[i]);
+
+  /* Now set all the tracepoints.  */
+  for (i = 0; i < sals.nelts; i++)
+    {
+      sal = sals.sals[i];
+
+      t = set_raw_tracepoint (sal);
+      set_tracepoint_count (tracepoint_count + 1);
+      t->number = tracepoint_count;
+
+      /* If a canonical line spec is needed use that instead of the
+	 command string.  */
+      if (canonical != (char **)NULL && canonical[i] != NULL)
+	t->addr_string = canonical[i];
+      else if (addr_start)
+	t->addr_string = savestring (addr_start, addr_end - addr_start);
+
+      trace_mention (t);
+
+      /* Let the UI know of any additions */
+      if (create_tracepoint_hook)
+	create_tracepoint_hook (t);
+    }
+
+  if (sals.nelts > 1)
+    {
+      printf_filtered ("Multiple tracepoints were set.\n");
+      printf_filtered ("Use 'delete trace' to delete unwanted tracepoints.\n");
+    }
+}
+
+/* Tell the user we have just set a tracepoint TP. */
+
+static void
+trace_mention (tp)
+     struct tracepoint *tp;
+{
+  printf_filtered ("Tracepoint %d", tp->number);
+
+  if (addressprint || (tp->source_file == NULL))
+    {
+      printf_filtered (" at ");
+      print_address_numeric (tp->address, 1, gdb_stdout);
+    }
+  if (tp->source_file)
+    printf_filtered (": file %s, line %d.",
+		     tp->source_file, tp->line_number);
+
+  printf_filtered ("\n");
+}
+
+/* Print information on tracepoint number TPNUM_EXP, or all if omitted.  */
+
+static void
+tracepoints_info (tpnum_exp, from_tty)
+     char *tpnum_exp;
+     int from_tty;
+{
+  struct tracepoint *t;
+  struct action_line *action;
+  int found_a_tracepoint = 0;
+  char wrap_indent[80];
+  struct symbol *sym;
+  int tpnum = -1;
+
+  if (tpnum_exp)
+    tpnum = parse_and_eval_address (tpnum_exp);
+
+  ALL_TRACEPOINTS (t)
+    if (tpnum == -1 || tpnum == t->number)
+      {
+	extern int addressprint;	/* print machine addresses? */
+
+	if (!found_a_tracepoint++)
+	  {
+	    printf_filtered ("Num Enb ");
+	    if (addressprint)
+	      printf_filtered ("Address    ");
+	    printf_filtered ("PassC StepC What\n");
+	  }
+	strcpy (wrap_indent, "                           ");
+	if (addressprint)
+	  strcat (wrap_indent, "           ");
+
+	printf_filtered ("%-3d %-3s ", t->number, 
+			 t->enabled == enabled ? "y" : "n");
+	if (addressprint)
+	  printf_filtered ("%s ", 
+			   local_hex_string_custom ((unsigned long) t->address,
+						    "08l"));
+	printf_filtered ("%-5d %-5d ", t->pass_count, t->step_count);
+
+	if (t->source_file)
+	  {
+	    sym = find_pc_sect_function (t->address, t->section);
+	    if (sym)
+	      {
+		fputs_filtered ("in ", gdb_stdout);
+		fputs_filtered (SYMBOL_SOURCE_NAME (sym), gdb_stdout);
+		wrap_here (wrap_indent);
+		fputs_filtered (" at ", gdb_stdout);
+	      }
+	    fputs_filtered (t->source_file, gdb_stdout);
+	    printf_filtered (":%d", t->line_number);
+	  }
+	else
+	  print_address_symbolic (t->address, gdb_stdout, demangle, " ");
+
+	printf_filtered ("\n");
+	if (t->actions)
+	  {
+	    printf_filtered ("  Actions for tracepoint %d: \n", t->number);
+	    for (action = t->actions; action; action = action->next)
+	      {
+		printf_filtered ("\t%s\n", action->action);
+	      }
+	  }
+      }
+  if (!found_a_tracepoint)
+    {
+      if (tpnum == -1)
+        printf_filtered ("No tracepoints.\n");
+      else
+        printf_filtered ("No tracepoint number %d.\n", tpnum);
+    }
+}
+
+/* Optimization: the code to parse an enable, disable, or delete TP command
+   is virtually identical except for whether it performs an enable, disable,
+   or delete.  Therefore I've combined them into one function with an opcode.
+   */
+enum tracepoint_opcode 
+{
+  enable, 
+  disable,
+  delete
+};
+
+/* This function implements enable, disable and delete. */
+static void
+tracepoint_operation (t, from_tty, opcode)
+     struct tracepoint *t;
+     int from_tty;
+     enum tracepoint_opcode opcode;
+{
+  struct tracepoint *t2;
+
+  switch (opcode) {
+  case enable:
+    t->enabled = enabled;
+    if (modify_tracepoint_hook)
+      modify_tracepoint_hook (t);
+    break;
+  case disable:
+    t->enabled = disabled;
+    if (modify_tracepoint_hook)
+      modify_tracepoint_hook (t);
+    break;
+  case delete:
+    if (tracepoint_chain == t)
+      tracepoint_chain = t->next;
+
+    ALL_TRACEPOINTS (t2)
+      if (t2->next == t)
+	{
+	  t2->next = t->next;
+	  break;
+	}
+
+    /* Let the UI know of any deletions */
+    if (delete_tracepoint_hook)
+      delete_tracepoint_hook (t);
+
+    if (t->addr_string)
+      free (t->addr_string);
+    if (t->source_file)
+      free (t->source_file);
+    if (t->actions)
+      free_actions (t);
+
+    free (t);
+    break;
+  }
+}
+
+/* Utility: parse a tracepoint number and look it up in the list.  */
+struct tracepoint *
+get_tracepoint_by_number (arg)
+     char **arg;
+{
+  struct tracepoint *t;
+  char *end, *copy;
+  value_ptr val;
+  int tpnum;
+
+  if (arg == 0)
+    error ("Bad tracepoint argument");
+
+  if (*arg == 0 || **arg == 0)	/* empty arg means refer to last tp */
+    tpnum = tracepoint_count;
+  else if (**arg == '$')	/* handle convenience variable */
+    {
+      /* Make a copy of the name, so we can null-terminate it
+	 to pass to lookup_internalvar().  */
+      end = *arg + 1;
+      while (isalnum(*end) || *end == '_')
+	end++;
+      copy = (char *) alloca (end - *arg);
+      strncpy (copy, *arg + 1, (end - *arg - 1));
+      copy[end - *arg - 1] = '\0';
+      *arg = end;
+
+      val = value_of_internalvar (lookup_internalvar (copy));
+      if (TYPE_CODE( VALUE_TYPE (val)) != TYPE_CODE_INT)
+	error ("Convenience variable must have integral type.");
+      tpnum = (int) value_as_long (val);
+    }
+  else		/* handle tracepoint number */
+    {
+      tpnum = strtol (*arg, arg, 0);
+      if (tpnum == 0)		/* possible strtol failure */
+	while (**arg && !isspace (**arg))
+	  (*arg)++;		/* advance to next white space, if any */
+    }
+  ALL_TRACEPOINTS (t)
+    if (t->number == tpnum)
+      {
+	return t;
+      }
+  printf_unfiltered ("No tracepoint number %d.\n", tpnum);
+  return NULL;
+}
+
+/* Utility: parse a list of tracepoint numbers, and call a func for each. */
+static void
+map_args_over_tracepoints (args, from_tty, opcode)
+     char *args;
+     int from_tty;
+     enum tracepoint_opcode opcode;
+{
+  struct tracepoint *t, *tmp;
+  int tpnum;
+  char *cp;
+
+  if (args == 0 || *args == 0)	/* do them all */
+    ALL_TRACEPOINTS_SAFE (t, tmp)
+      tracepoint_operation (t, from_tty, opcode);
+  else
+    while (*args)
+      {
+	QUIT;		/* give user option to bail out with ^C */
+	if (t = get_tracepoint_by_number (&args))
+	  tracepoint_operation (t, from_tty, opcode);
+	while (*args == ' ' || *args == '\t')
+	  args++;
+      }
+}
+
+/* The 'enable trace' command enables tracepoints.  Not supported by all targets.  */
+static void
+enable_trace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();
+  map_args_over_tracepoints (args, from_tty, enable);
+}
+
+/* The 'disable trace' command enables tracepoints.  Not supported by all targets.  */
+static void
+disable_trace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();
+  map_args_over_tracepoints (args, from_tty, disable);
+}
+
+/* Remove a tracepoint (or all if no argument) */
+static void
+delete_trace_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();
+  if (!args || !*args)		/* No args implies all tracepoints; */
+    if (from_tty)		/* confirm only if from_tty... */
+      if (tracepoint_chain) 	/* and if there are tracepoints to delete! */
+	if (!query ("Delete all tracepoints? "))
+	  return;
+
+  map_args_over_tracepoints (args, from_tty, delete);
+}
+
+/* Set passcount for tracepoint.
+
+   First command argument is passcount, second is tracepoint number.
+   If tracepoint number omitted, apply to most recently defined.
+   Also accepts special argument "all".  */
+
+static void
+trace_pass_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct tracepoint *t1 = (struct tracepoint *) -1, *t2;
+  unsigned long count;
+
+  if (args == 0 || *args == 0)
+    error ("PASS command requires an argument (count + optional TP num)");
+
+  count = strtoul (args, &args, 10);	/* count comes first, then TP num */
+
+  while (*args && isspace (*args))
+    args++;
+
+  if (*args && strncasecmp (args, "all", 3) == 0)
+    args += 3;	/* skip special argument "all" */
+  else
+    t1 = get_tracepoint_by_number (&args);
+
+  if (*args)
+    error ("Junk at end of arguments.");
+
+  if (t1 == NULL)
+    return;	/* error, bad tracepoint number */
+
+  ALL_TRACEPOINTS (t2)
+    if (t1 == (struct tracepoint *) -1 || t1 == t2)
+      {
+	t2->pass_count = count;
+        if (modify_tracepoint_hook)
+          modify_tracepoint_hook (t2);
+	if (from_tty)
+	  printf_filtered ("Setting tracepoint %d's passcount to %d\n", 
+			   t2->number, count);
+      }
+}
+
+/* ACTIONS functions: */
+
+/* Prototypes for action-parsing utility commands  */
+static void  read_actions PARAMS((struct tracepoint *));
+static char *parse_and_eval_memrange PARAMS ((char *,
+					      CORE_ADDR, 
+					      long *,
+					      bfd_signed_vma *,
+					      long *));
+
+/* The three functions:
+   	collect_pseudocommand, 
+	while_stepping_pseudocommand, and 
+	end_actions_pseudocommand
+   are placeholders for "commands" that are actually ONLY to be used
+   within a tracepoint action list.  If the actual function is ever called,
+   it means that somebody issued the "command" at the top level,
+   which is always an error.  */
+
+static void 
+end_actions_pseudocommand (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  error ("This command cannot be used at the top level.");
+}
+
+static void
+while_stepping_pseudocommand (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  error ("This command can only be used in a tracepoint actions list.");
+}
+
+static void
+collect_pseudocommand (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  error ("This command can only be used in a tracepoint actions list.");
+}
+
+/* Enter a list of actions for a tracepoint.  */
+static void
+trace_actions_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct tracepoint *t;
+  char *actions;
+  char tmpbuf[128];
+  char *end_msg = "End with a line saying just \"end\".";
+
+  if (t = get_tracepoint_by_number (&args))
+    {
+      sprintf (tmpbuf, "Enter actions for tracepoint %d, one per line.",
+	       t->number);
+
+      if (from_tty)
+	{
+	  if (readline_begin_hook)
+	    (*readline_begin_hook) ("%s  %s\n", tmpbuf, end_msg);
+	  else if (input_from_terminal_p ())
+	    printf_filtered ("%s\n%s\n", tmpbuf, end_msg);
+	}
+
+      free_actions (t);
+      t->step_count = 0;	/* read_actions may set this */
+      read_actions (t);
+
+      if (readline_end_hook)
+	(*readline_end_hook) ();
+
+      /* tracepoints_changed () */
+    }
+  /* else error, just return; */
+}
+
+/* worker function */
+static void
+read_actions (t)
+     struct tracepoint *t;
+{
+  char *line;
+  char *prompt1 = "> ", *prompt2 = "  > ";
+  char *prompt = prompt1;
+  enum actionline_type linetype;
+  extern FILE *instream;
+  struct action_line *next = NULL, *temp;
+  struct cleanup *old_chain;
+
+  /* Control-C quits instantly if typed while in this loop
+     since it should not wait until the user types a newline.  */
+  immediate_quit++;
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, stop_sig);
+#endif
+  old_chain = make_cleanup ((make_cleanup_func) free_actions, (void *) t);
+  while (1)
+    {
+      /* Make sure that all output has been output.  Some machines may let
+	 you get away with leaving out some of the gdb_flush, but not all.  */
+      wrap_here ("");
+      gdb_flush (gdb_stdout);
+      gdb_flush (gdb_stderr);
+
+      if (readline_hook && instream == NULL)
+	line = (*readline_hook) (prompt);
+      else if (instream == stdin && ISATTY (instream))
+	{
+	  line = readline (prompt);
+	  if (line && *line)		/* add it to command history */
+	    add_history (line);
+	}
+      else
+	line = gdb_readline (0);
+
+      linetype = validate_actionline (&line, t);
+      if (linetype == BADLINE)
+	continue;	/* already warned -- collect another line */
+
+      temp = xmalloc (sizeof (struct action_line));
+      temp->next = NULL;
+      temp->action = line;
+
+      if (next == NULL)		/* first action for this tracepoint? */
+	t->actions = next = temp;
+      else
+	{
+	  next->next = temp;
+	  next = temp;
+	}
+
+      if (linetype == STEPPING)	/* begin "while-stepping" */
+	if (prompt == prompt2)
+	  {
+	    warning ("Already processing 'while-stepping'");
+	    continue;
+	  }
+	else
+	  prompt = prompt2;	/* change prompt for stepping actions */
+      else if (linetype == END)
+	if (prompt == prompt2)
+	  {
+	    prompt = prompt1;	/* end of single-stepping actions */
+	  }
+	else
+	  { /* end of actions */
+	    if (t->actions->next == NULL)
+	      {
+		/* an "end" all by itself with no other actions means
+		   this tracepoint has no actions.  Discard empty list. */
+		free_actions (t);
+	      }
+	    break;
+	  }
+    }
+#ifdef STOP_SIGNAL
+  if (job_control)
+    signal (STOP_SIGNAL, SIG_DFL);
+#endif
+  immediate_quit = 0;
+  discard_cleanups (old_chain);
+}
+
+/* worker function */
+enum actionline_type
+validate_actionline (line, t)
+     char **line;
+     struct tracepoint *t;
+{
+  struct cmd_list_element *c;
+  struct expression *exp = NULL;
+  value_ptr temp, temp2;
+  struct cleanup *old_chain = NULL;
+  char *p;
+
+  for (p = *line; isspace (*p); )
+    p++;
+
+  /* symbol lookup etc. */
+  if (*p == '\0')	/* empty line: just prompt for another line. */
+    return BADLINE;
+
+  if (*p == '#')	/* comment line */
+    return GENERIC;
+
+  c = lookup_cmd (&p, cmdlist, "", -1, 1);
+  if (c == 0)
+    {
+      warning ("'%s' is not an action that I know, or is ambiguous.", p);
+      return BADLINE;
+    }
+    
+  if (c->function.cfunc == collect_pseudocommand)
+    {
+      struct agent_expr *aexpr;
+      struct agent_reqs areqs;
+
+      do {			/* repeat over a comma-separated list */
+	QUIT;			/* allow user to bail out with ^C */
+	while (isspace (*p))
+	  p++;
+
+	if (*p == '$')			/* look for special pseudo-symbols */
+	  {
+	    long typecode, size;
+	    bfd_signed_vma offset;
+
+	    if ((0 == strncasecmp ("reg", p + 1, 3)) ||
+		(0 == strncasecmp ("arg", p + 1, 3)) ||
+		(0 == strncasecmp ("loc", p + 1, 3)))
+	      {
+		p = strchr (p, ',');
+		continue;
+	      }
+	    /* else fall thru, treat p as an expression and parse it! */
+	  }
+	exp   = parse_exp_1 (&p, block_for_pc (t->address), 1);
+	old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                  &exp);
+
+	if (exp->elts[0].opcode == OP_VAR_VALUE)
+	  if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
+	    {
+	      warning ("%s is constant (value %d): will not be collected.",
+		       SYMBOL_NAME (exp->elts[2].symbol),
+		       SYMBOL_VALUE (exp->elts[2].symbol));
+	      return BADLINE;
+	    }
+	  else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
+	    {
+	      warning ("%s is optimized away and cannot be collected.",
+		       SYMBOL_NAME (exp->elts[2].symbol));
+	      return BADLINE;
+	    }
+
+	/* we have something to collect, make sure that the expr to
+	   bytecode translator can handle it and that it's not too long */
+	aexpr = gen_trace_for_expr (t->address, exp);
+	(void) make_cleanup ((make_cleanup_func) free_agent_expr, aexpr);
+
+	if (aexpr->len > MAX_AGENT_EXPR_LEN)
+	  error ("expression too complicated, try simplifying");
+
+	ax_reqs(aexpr, &areqs);
+	(void) make_cleanup (free, areqs.reg_mask);
+
+	if (areqs.flaw != agent_flaw_none)
+	  error ("malformed expression");
+
+	if (areqs.min_height < 0)
+	  error ("gdb: Internal error: expression has min height < 0");
+
+	if (areqs.max_height > 20)
+	  error ("expression too complicated, try simplifying");
+
+	do_cleanups (old_chain);
+      } while (p && *p++ == ',');
+      return GENERIC;
+    }
+  else if (c->function.cfunc == while_stepping_pseudocommand)
+    {
+      char *steparg;	/* in case warning is necessary */
+
+      while (isspace (*p))
+	p++;
+      steparg = p;
+
+      if (*p == '\0' ||
+	  (t->step_count = strtol (p, &p, 0)) == 0)
+	{
+	  warning ("bad step-count: command ignored.", *line);
+	  return BADLINE;
+	}
+      return STEPPING;
+    }
+  else if (c->function.cfunc == end_actions_pseudocommand)
+    return END;
+  else
+    {
+      warning ("'%s' is not a supported tracepoint action.", *line);
+      return BADLINE;
+    }
+}
+
+/* worker function */
+void 
+free_actions (t)
+     struct tracepoint *t;
+{
+  struct action_line *line, *next;
+
+  for (line = t->actions; line; line = next)
+    {
+      next = line->next;
+      if (line->action) 
+	free (line->action);
+      free (line);
+    }
+  t->actions = NULL;
+}
+
+struct memrange {
+  int type;		/* 0 for absolute memory range, else basereg number */
+  bfd_signed_vma start;
+  bfd_signed_vma end;
+};
+
+struct collection_list {
+  unsigned char regs_mask[8];	/* room for up to 256 regs */
+  long listsize;
+  long next_memrange;
+  struct memrange *list;
+  long aexpr_listsize;		/* size of array pointed to by expr_list elt */
+  long next_aexpr_elt;
+  struct agent_expr **aexpr_list;
+  
+} tracepoint_list, stepping_list;
+
+/* MEMRANGE functions: */
+
+static int memrange_cmp PARAMS ((const void *, const void *));
+
+/* compare memranges for qsort */
+static int
+memrange_cmp (va, vb)
+     const void *va;
+     const void *vb;
+{
+  const struct memrange *a = va, *b = vb;
+
+  if (a->type < b->type)
+    return -1;
+  if (a->type > b->type)
+    return  1;
+  if (a->type == 0)
+    {
+      if ((bfd_vma) a->start  < (bfd_vma) b->start)  return -1;
+      if ((bfd_vma) a->start  > (bfd_vma) b->start)  return  1;
+    }
+  else
+    {
+      if (a->start  < b->start)
+	return -1;
+      if (a->start  > b->start)
+	return  1;
+    }
+  return 0;
+}
+
+/* Sort the memrange list using qsort, and merge adjacent memranges */
+static void
+memrange_sortmerge (memranges)
+     struct collection_list *memranges;
+{
+  int a, b;
+
+  qsort (memranges->list, memranges->next_memrange, 
+	 sizeof (struct memrange), memrange_cmp);
+  if (memranges->next_memrange > 0)
+    {
+      for (a = 0, b = 1; b < memranges->next_memrange; b++)
+	{
+	  if (memranges->list[a].type == memranges->list[b].type &&
+	      memranges->list[b].start - memranges->list[a].end <= 
+	      MAX_REGISTER_VIRTUAL_SIZE)
+	    {
+	      /* memrange b starts before memrange a ends; merge them.  */
+	      if (memranges->list[b].end > memranges->list[a].end)
+		memranges->list[a].end = memranges->list[b].end;
+	      continue;		/* next b, same a */
+	    }
+	  a++;			/* next a */
+	  if (a != b)
+	    memcpy (&memranges->list[a], &memranges->list[b], 
+		    sizeof (struct memrange));
+	}
+      memranges->next_memrange = a + 1;
+    }
+}
+
+/* Add a register to a collection list */
+void
+add_register (collection, regno)
+     struct collection_list *collection;
+     unsigned long regno;
+{
+  if (info_verbose)
+    printf_filtered ("collect register %d\n", regno);
+  if (regno > (8 * sizeof (collection->regs_mask)))
+    error ("Internal: register number %d too large for tracepoint",
+	   regno);
+  collection->regs_mask [regno / 8] |= 1 << (regno  % 8);
+}
+
+/* Add a memrange to a collection list */
+static void
+add_memrange (memranges, type, base, len)
+     struct collection_list *memranges;
+     int type;
+     bfd_signed_vma base;
+     unsigned long len;
+{
+  if (info_verbose)
+    printf_filtered ("(%d,0x%x,%d)\n", type, base, len);
+  /* type: 0 == memory, n == basereg */
+  memranges->list[memranges->next_memrange].type  = type;
+  /* base: addr if memory, offset if reg relative. */
+  memranges->list[memranges->next_memrange].start = base;
+  /* len: we actually save end (base + len) for convenience */
+  memranges->list[memranges->next_memrange].end   = base + len;
+  memranges->next_memrange++;
+  if (memranges->next_memrange >= memranges->listsize)
+    {
+      memranges->listsize *= 2;
+      memranges->list = xrealloc (memranges->list, 
+				  memranges->listsize);
+    }
+
+  if (type != -1)	/* better collect the base register! */
+    add_register (memranges, type);
+}
+
+/* Add a symbol to a collection list */
+static void
+collect_symbol (collect, sym, frame_regno, frame_offset)
+     struct collection_list *collect;
+     struct symbol *sym;
+     long frame_regno;
+     long frame_offset;
+{
+  unsigned long  len;
+  unsigned long  reg;
+  bfd_signed_vma offset;
+
+  len  = TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym)));
+  switch (SYMBOL_CLASS (sym)) {
+  default:
+    printf_filtered ("%s: don't know symbol class %d\n",
+		     SYMBOL_NAME (sym), SYMBOL_CLASS (sym));
+    break;
+  case LOC_CONST:
+    printf_filtered ("%s is constant, value is %d: will not be collected.\n",
+		     SYMBOL_NAME (sym), SYMBOL_VALUE (sym));
+    break;
+  case LOC_STATIC:
+    offset = SYMBOL_VALUE_ADDRESS (sym); 
+    if (info_verbose)
+      printf_filtered ("LOC_STATIC %s: collect %d bytes at 0x%08x\n",
+		       SYMBOL_NAME (sym), len, offset);
+    add_memrange (collect, -1, offset, len);	/* 0 == memory */
+    break;
+  case LOC_REGISTER:
+  case LOC_REGPARM:
+    reg = SYMBOL_VALUE (sym); 
+    if (info_verbose)
+      printf_filtered ("LOC_REG[parm] %s: ", SYMBOL_NAME (sym));
+    add_register (collect, reg);
+    /* check for doubles stored in two registers */
+    /* FIXME: how about larger types stored in 3 or more regs? */
+    if (TYPE_CODE (SYMBOL_TYPE (sym)) == TYPE_CODE_FLT &&
+	len > REGISTER_RAW_SIZE (reg))
+      add_register (collect, reg + 1);
+    break;
+  case LOC_REF_ARG:
+    printf_filtered ("Sorry, don't know how to do LOC_REF_ARG yet.\n");
+    printf_filtered ("       (will not collect %s)\n", 
+		     SYMBOL_NAME (sym));
+    break;
+  case LOC_ARG:
+    reg    = frame_regno;
+    offset = frame_offset + SYMBOL_VALUE (sym);
+    if (info_verbose)
+      {
+	printf_filtered ("LOC_LOCAL %s: Collect %d bytes at offset",
+			 SYMBOL_NAME (sym), len);
+	printf_filtered (" %d from frame ptr reg %d\n", offset, reg);
+      }
+    add_memrange (collect, reg, offset, len);
+    break;
+  case LOC_REGPARM_ADDR:
+    reg = SYMBOL_VALUE (sym);
+    offset = 0;
+    if (info_verbose)
+      {
+	printf_filtered ("LOC_REGPARM_ADDR %s: Collect %d bytes at offset",
+			 SYMBOL_NAME (sym), len);
+	printf_filtered (" %d from reg %d\n", offset, reg);
+      }
+    add_memrange (collect, reg, offset, len);
+    break;
+  case LOC_LOCAL:
+  case LOC_LOCAL_ARG:
+    reg    = frame_regno;
+    offset = frame_offset + SYMBOL_VALUE (sym);
+    if (info_verbose)
+      {
+	printf_filtered ("LOC_LOCAL %s: Collect %d bytes at offset",
+			 SYMBOL_NAME (sym), len);
+	printf_filtered (" %d from frame ptr reg %d\n", offset, reg);
+      }
+    add_memrange (collect, reg, offset, len);
+    break;
+  case LOC_BASEREG:
+  case LOC_BASEREG_ARG:
+    reg = SYMBOL_BASEREG (sym);
+    offset  = SYMBOL_VALUE (sym);
+    if (info_verbose)
+      {
+	printf_filtered ("LOC_BASEREG %s: collect %d bytes at offset %d from basereg %d\n", 
+			 SYMBOL_NAME (sym), len, offset, reg);
+      }
+    add_memrange (collect, reg, offset, len);
+    break;
+  case LOC_UNRESOLVED:
+    printf_filtered ("Don't know LOC_UNRESOLVED %s\n", SYMBOL_NAME (sym));
+    break;
+  case LOC_OPTIMIZED_OUT:
+    printf_filtered ("%s has been optimized out of existance.\n",
+		     SYMBOL_NAME (sym));
+    break;
+  }
+}
+
+/* Add all locals (or args) symbols to collection list */
+static void
+add_local_symbols (collect, pc, frame_regno, frame_offset, type)
+     struct collection_list *collect;
+     CORE_ADDR pc;
+     long frame_regno;
+     long frame_offset;
+     int type;
+{
+  struct symbol *sym;
+  struct block  *block;
+  int i, nsyms, count = 0;
+
+  block = block_for_pc (pc);
+  while (block != 0)
+    {
+      QUIT;				/* allow user to bail out with ^C */
+      nsyms = BLOCK_NSYMS (block);
+      for (i = 0; i < nsyms; i++)
+	{
+	  sym = BLOCK_SYM (block, i);
+	  switch (SYMBOL_CLASS (sym)) {
+	  case LOC_LOCAL:
+	  case LOC_STATIC:
+	  case LOC_REGISTER:
+	  case LOC_BASEREG:
+	    if (type == 'L')	/* collecting Locals */
+	      {
+		count++;
+		collect_symbol (collect, sym, frame_regno, frame_offset);
+	      }
+	    break;
+	  case LOC_ARG:
+	  case LOC_LOCAL_ARG:
+	  case LOC_REF_ARG:
+	  case LOC_REGPARM:
+	  case LOC_REGPARM_ADDR:
+	  case LOC_BASEREG_ARG:
+	    if (type == 'A')	/* collecting Arguments */
+	      {
+		count++;
+		collect_symbol (collect, sym, frame_regno, frame_offset);
+	      }
+	  }
+	}
+      if (BLOCK_FUNCTION (block))
+	break;
+      else
+	block = BLOCK_SUPERBLOCK (block);
+    }
+  if (count == 0)
+    warning ("No %s found in scope.", type == 'L' ? "locals" : "args");
+}
+
+/* worker function */
+static void
+clear_collection_list (list)
+     struct collection_list *list;
+{
+  int ndx;
+
+  list->next_memrange = 0;
+  for (ndx = 0; ndx < list->next_aexpr_elt; ndx++)
+    {
+      free_agent_expr(list->aexpr_list[ndx]);
+      list->aexpr_list[ndx] = NULL;
+    }
+  list->next_aexpr_elt = 0;
+  memset (list->regs_mask, 0, sizeof (list->regs_mask));
+}
+
+/* reduce a collection list to string form (for gdb protocol) */
+static char **
+stringify_collection_list (list, string)
+     struct collection_list *list;
+     char *string;
+{
+  char temp_buf[2048];
+  int count;
+  int ndx = 0;
+  char *(*str_list)[];
+  char *end;
+  long  i;
+
+  count = 1 + list->next_memrange + list->next_aexpr_elt + 1;
+  str_list = (char *(*)[])xmalloc(count * sizeof (char *));
+
+  for (i = sizeof (list->regs_mask) - 1; i > 0; i--)
+    if (list->regs_mask[i] != 0)	/* skip leading zeroes in regs_mask */
+      break;
+  if (list->regs_mask[i] != 0)	/* prepare to send regs_mask to the stub */
+    {
+      if (info_verbose)
+	printf_filtered ("\nCollecting registers (mask): 0x");
+      end = temp_buf;
+      *end++='R';
+      for (; i >= 0; i--)
+	{
+	  QUIT;				/* allow user to bail out with ^C */
+	  if (info_verbose)
+	    printf_filtered ("%02X", list->regs_mask[i]);
+	  sprintf (end,  "%02X", list->regs_mask[i]);
+	  end += 2;
+	}
+      (*str_list)[ndx] = savestring(temp_buf, end - temp_buf);
+      ndx++;
+    }
+  if (info_verbose)
+    printf_filtered ("\n");
+  if (list->next_memrange > 0 && info_verbose)
+    printf_filtered ("Collecting memranges: \n");
+  for (i = 0, count = 0, end = temp_buf; i < list->next_memrange; i++)
+    {
+      QUIT;			/* allow user to bail out with ^C */
+      if (info_verbose)
+	printf_filtered ("(%d, 0x%x, %d)\n", 
+			 list->list[i].type, 
+			 list->list[i].start, 
+			 list->list[i].end - list->list[i].start);
+      if (count + 27 > MAX_AGENT_EXPR_LEN)
+	{
+	  (*str_list)[ndx] = savestring(temp_buf, count);
+	  ndx++;
+	  count = 0;
+	  end = temp_buf;
+	}
+      sprintf (end, "M%X,%X,%X", 
+	       list->list[i].type, 
+	       list->list[i].start, 
+	       list->list[i].end - list->list[i].start);
+      count += strlen (end);
+      end += strlen (end);
+    }
+
+  for (i = 0; i < list->next_aexpr_elt; i++)
+    {
+      QUIT;			/* allow user to bail out with ^C */
+      if ((count + 10 + 2 * list->aexpr_list[i]->len) > MAX_AGENT_EXPR_LEN)
+	{
+	  (*str_list)[ndx] = savestring(temp_buf, count);
+	  ndx++;
+	  count = 0;
+	  end = temp_buf;
+	}
+      sprintf (end, "X%08X,", list->aexpr_list[i]->len);
+      end += 10;		/* 'X' + 8 hex digits + ',' */
+      count += 10;
+
+      end = mem2hex(list->aexpr_list[i]->buf, end, list->aexpr_list[i]->len);
+      count += 2 * list->aexpr_list[i]->len;
+    }
+
+  if (count != 0)
+    {
+      (*str_list)[ndx] = savestring(temp_buf, count);
+      ndx++;
+      count = 0;
+      end = temp_buf;
+    }
+  (*str_list)[ndx] = NULL;
+
+  if (ndx == 0)
+    return NULL;
+  else
+    return *str_list;
+}
+
+void
+free_actions_list(actions_list)
+     char **actions_list;
+{
+  int ndx;
+
+  if (actions_list == 0)
+    return;
+
+  for (ndx = 0; actions_list[ndx]; ndx++)
+    free(actions_list[ndx]);
+
+  free(actions_list);
+}
+
+/* render all actions into gdb protocol */
+static void
+encode_actions (t, tdp_actions, stepping_actions)
+     struct tracepoint  *t;
+     char              ***tdp_actions;
+     char              ***stepping_actions;
+{
+  static char        tdp_buff[2048], step_buff[2048];
+  char               *action_exp;
+  struct expression  *exp = NULL;
+  struct action_line *action;
+  bfd_signed_vma      offset;
+  long                i;
+  value_ptr           tempval;
+  struct collection_list  *collect;
+  struct cmd_list_element *cmd;
+  struct agent_expr *aexpr;
+  long                frame_reg, frame_offset;
+
+
+  clear_collection_list (&tracepoint_list);
+  clear_collection_list (&stepping_list);
+  collect = &tracepoint_list;
+
+  *tdp_actions = NULL;
+  *stepping_actions = NULL;
+
+  TARGET_VIRTUAL_FRAME_POINTER (t->address, &frame_reg, &frame_offset);
+
+  for (action = t->actions; action; action = action->next)
+    {
+      QUIT;			/* allow user to bail out with ^C */
+      action_exp = action->action;
+      while (isspace (*action_exp))
+	action_exp++;
+
+      if (*action_exp == '#')	/* comment line */
+	return;
+
+      cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
+      if (cmd == 0)
+	error ("Bad action list item: %s", action_exp);
+
+      if (cmd->function.cfunc == collect_pseudocommand)
+	{
+	  do {	/* repeat over a comma-separated list */
+	    QUIT;		/* allow user to bail out with ^C */
+	    while (isspace (*action_exp))
+	      action_exp++;
+
+	    if (0 == strncasecmp ("$reg", action_exp, 4))
+	      {
+		for (i = 0; i < NUM_REGS; i++)
+		  add_register (collect, i);
+		action_exp = strchr (action_exp, ','); /* more? */
+	      }
+	    else if (0 == strncasecmp ("$arg", action_exp, 4))
+	      {
+		add_local_symbols (collect, 
+				   t->address, 
+				   frame_reg,
+				   frame_offset,
+				   'A');
+		action_exp = strchr (action_exp, ','); /* more? */
+	      }
+	    else if (0 == strncasecmp ("$loc", action_exp, 4))
+	      {
+		add_local_symbols (collect, 
+				   t->address, 
+				   frame_reg,
+				   frame_offset,
+				   'L');
+		action_exp = strchr (action_exp, ','); /* more? */
+	      }
+	    else
+	      {
+		unsigned long addr, len;
+		struct cleanup *old_chain = NULL;
+		struct cleanup *old_chain1 = NULL;
+		struct agent_reqs areqs;
+
+		exp = parse_exp_1 (&action_exp, block_for_pc (t->address), 1);
+		old_chain = make_cleanup ((make_cleanup_func) 
+                                          free_current_contents, &exp);
+
+		switch (exp->elts[0].opcode) {
+		case OP_REGISTER:
+		  i = exp->elts[1].longconst;
+		  if (info_verbose)
+		    printf_filtered ("OP_REGISTER: ");
+		  add_register (collect, i);
+		  break;
+
+		case UNOP_MEMVAL:
+		  /* safe because we know it's a simple expression */
+		  tempval = evaluate_expression (exp);
+		  addr = VALUE_ADDRESS (tempval) + VALUE_OFFSET (tempval);
+		  len = TYPE_LENGTH (check_typedef (exp->elts[1].type));
+		  add_memrange (collect, -1, addr, len);
+		  break;
+
+		case OP_VAR_VALUE:
+		  collect_symbol (collect, 
+				  exp->elts[2].symbol,
+				  frame_reg,
+				  frame_offset);
+		  break;
+
+		default:	/* full-fledged expression */
+		  aexpr = gen_trace_for_expr (t->address, exp);
+
+		  old_chain1 = make_cleanup ((make_cleanup_func) 
+                                             free_agent_expr, aexpr);
+
+		  ax_reqs (aexpr, &areqs);
+		  if (areqs.flaw != agent_flaw_none)
+		    error ("malformed expression");
+
+		  if (areqs.min_height < 0)
+		    error ("gdb: Internal error: expression has min height < 0");
+		  if (areqs.max_height > 20)
+		    error ("expression too complicated, try simplifying");
+
+		  discard_cleanups (old_chain1);
+		  add_aexpr (collect, aexpr);
+
+		  /* take care of the registers */
+		  if (areqs.reg_mask_len > 0)
+		    {
+		      int ndx1;
+		      int ndx2;
+
+		      for (ndx1 = 0; ndx1 < areqs.reg_mask_len; ndx1++)
+			{
+			  QUIT;		/* allow user to bail out with ^C */
+			  if (areqs.reg_mask[ndx1] != 0)
+			    {
+			      /* assume chars have 8 bits */
+			      for (ndx2 = 0; ndx2 < 8; ndx2++)
+				if (areqs.reg_mask[ndx1] & (1 << ndx2))
+				  /* it's used -- record it */
+				  add_register (collect, ndx1 * 8 + ndx2);
+			    }
+			}
+		    }
+		  break;
+		}	/* switch */
+		do_cleanups (old_chain);
+	      }		/* do */
+	  } while (action_exp && *action_exp++ == ',');
+	}		/* if */
+      else if (cmd->function.cfunc == while_stepping_pseudocommand)
+	{
+	  collect = &stepping_list;
+	}
+      else if (cmd->function.cfunc == end_actions_pseudocommand)
+	{
+	  if (collect == &stepping_list)	/* end stepping actions */
+	    collect = &tracepoint_list;
+	  else
+	    break;			/* end tracepoint actions */
+	}
+    }			/* for */
+  memrange_sortmerge (&tracepoint_list); 
+  memrange_sortmerge (&stepping_list); 
+
+  *tdp_actions      = stringify_collection_list (&tracepoint_list, &tdp_buff);
+  *stepping_actions = stringify_collection_list (&stepping_list,   &step_buff);
+}
+
+static void
+add_aexpr(collect, aexpr)
+     struct collection_list *collect;
+     struct agent_expr *aexpr;
+{
+  if (collect->next_aexpr_elt >= collect->aexpr_listsize)
+    {
+      collect->aexpr_list =
+	xrealloc (collect->aexpr_list,
+		  2 * collect->aexpr_listsize * sizeof (struct agent_expr *));
+      collect->aexpr_listsize *= 2;
+    }
+  collect->aexpr_list[collect->next_aexpr_elt] = aexpr;
+  collect->next_aexpr_elt++;
+}
+
+static char target_buf[2048];
+
+/* Set "transparent" memory ranges
+
+   Allow trace mechanism to treat text-like sections
+   (and perhaps all read-only sections) transparently, 
+   i.e. don't reject memory requests from these address ranges
+   just because they haven't been collected.  */
+
+static void
+remote_set_transparent_ranges (void)
+{
+  extern bfd *exec_bfd;
+  asection *s;
+  bfd_size_type size;
+  bfd_vma lma;
+  int anysecs = 0;
+
+  if (!exec_bfd)
+    return;		/* no information to give. */
+
+  strcpy (target_buf, "QTro");
+  for (s = exec_bfd->sections; s; s = s->next)
+    {
+      char tmp[40];
+
+      if ((s->flags & SEC_LOAD)     == 0 ||
+       /* (s->flags & SEC_CODE)     == 0 || */
+	  (s->flags & SEC_READONLY) == 0)
+	continue;
+
+      anysecs = 1;
+      lma  = s->lma;
+      size = bfd_get_section_size_before_reloc (s);
+      sprintf (tmp, ":%x,%x", lma, lma + size);
+      strcat (target_buf, tmp);
+    }
+  if (anysecs)
+    {
+      putpkt (target_buf);
+      getpkt (target_buf, 0);
+    }
+}
+
+/* tstart command:
+ 
+   Tell target to clear any previous trace experiment.
+   Walk the list of tracepoints, and send them (and their actions)
+   to the target.  If no errors, 
+   Tell target to start a new trace experiment.  */
+
+static void
+trace_start_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM MOSTLY_IMPLEMENTED */
+  struct tracepoint *t;
+  char buf[2048];
+  char **tdp_actions;
+  char **stepping_actions;
+  int ndx;
+  struct cleanup *old_chain = NULL;
+
+  dont_repeat ();	/* like "run", dangerous to repeat accidentally */
+  
+  if (target_is_remote ())
+    {
+      putpkt ("QTinit");
+      remote_get_noisy_reply (target_buf);
+      if (strcmp (target_buf, "OK"))
+	error ("Target does not support this command.");
+
+      ALL_TRACEPOINTS (t)
+	{
+	  int ss_count;		/* if actions include singlestepping */
+	  int disable_mask;	/* ??? */
+	  int enable_mask;	/* ??? */
+
+	  sprintf (buf, "QTDP:%x:%x:%c:%x:%x", t->number, t->address, 
+		   t->enabled == enabled ? 'E' : 'D', 
+		   t->step_count, t->pass_count);
+
+	  if (t->actions)
+	    strcat (buf, "-");
+	  putpkt (buf);
+	  remote_get_noisy_reply (target_buf);
+	  if (strcmp (target_buf, "OK"))
+	    error ("Target does not support tracepoints.");
+
+	  if (t->actions)
+	    {
+	      encode_actions (t, &tdp_actions, &stepping_actions);
+	      old_chain = make_cleanup (free_actions_list, tdp_actions);
+	      (void) make_cleanup (free_actions_list, stepping_actions);
+
+	      /* do_single_steps (t); */
+	      if (tdp_actions)
+		{
+		  for (ndx = 0; tdp_actions[ndx]; ndx++)
+		    {
+		      QUIT;		/* allow user to bail out with ^C */
+		      sprintf (buf, "QTDP:-%x:%x:%s%c",
+			       t->number, t->address,
+			       tdp_actions[ndx],
+			       ((tdp_actions[ndx+1] || stepping_actions)
+				? '-' : 0));
+		      putpkt (buf);
+		      remote_get_noisy_reply (target_buf);
+		      if (strcmp (target_buf, "OK"))
+			error ("Error on target while setting tracepoints.");
+		    }
+		}
+	      if (stepping_actions)
+		{
+		  for (ndx = 0; stepping_actions[ndx]; ndx++)
+		    {
+		      QUIT;		/* allow user to bail out with ^C */
+		      sprintf (buf, "QTDP:-%x:%x:%s%s%s",
+			       t->number, t->address,
+			       ((ndx == 0) ? "S" : ""),
+			       stepping_actions[ndx],
+			       (stepping_actions[ndx+1] ? "-" : ""));
+		      putpkt (buf);
+		      remote_get_noisy_reply (target_buf);
+		      if (strcmp (target_buf, "OK"))
+			error ("Error on target while setting tracepoints.");
+		    }
+		}
+
+	      do_cleanups (old_chain);
+	    }
+	}
+      /* Tell target to treat text-like sections as transparent */
+      remote_set_transparent_ranges ();
+      /* Now insert traps and begin collecting data */
+      putpkt ("QTStart");
+      remote_get_noisy_reply (target_buf);
+      if (strcmp (target_buf, "OK"))
+	error ("Bogus reply from target: %s", target_buf);
+      set_traceframe_num (-1);	/* all old traceframes invalidated */
+      set_tracepoint_num (-1);
+      set_traceframe_context(-1);
+      trace_running_p = 1;
+      if (trace_start_stop_hook)
+	trace_start_stop_hook(1, from_tty);
+      
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+/* tstop command */
+static void
+trace_stop_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM IS_IMPLEMENTED */
+  if (target_is_remote ())
+    {
+      putpkt ("QTStop");
+      remote_get_noisy_reply (target_buf);
+      if (strcmp (target_buf, "OK"))
+	error ("Bogus reply from target: %s", target_buf);
+      trace_running_p = 0;
+      if (trace_start_stop_hook)
+	trace_start_stop_hook(0, from_tty);
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+unsigned long trace_running_p;
+
+/* tstatus command */
+static void
+trace_status_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM IS_IMPLEMENTED */
+  if (target_is_remote ())
+    {
+      putpkt ("qTStatus");
+      remote_get_noisy_reply (target_buf);
+
+      if (target_buf[0] != 'T' ||
+	  (target_buf[1] != '0' && target_buf[1] != '1'))
+	error ("Bogus reply from target: %s", target_buf);
+
+      /* exported for use by the GUI */
+      trace_running_p = (target_buf[1] == '1');
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+/* Worker function for the various flavors of the tfind command */
+static void
+finish_tfind_command (msg, from_tty)
+     char *msg;
+     int from_tty;
+{
+  int target_frameno = -1, target_tracept = -1;
+  CORE_ADDR old_frame_addr;
+  struct symbol *old_func;
+  char *reply;
+
+  old_frame_addr = FRAME_FP (get_current_frame ());
+  old_func       = find_pc_function (read_pc ());
+
+  putpkt (msg);
+  reply = remote_get_noisy_reply (msg);
+
+  while (reply && *reply)
+    switch (*reply) {
+    case 'F':
+      if ((target_frameno = (int) strtol (++reply, &reply, 16)) == -1)
+	{ 
+	  /* A request for a non-existant trace frame has failed.
+	     Our response will be different, depending on FROM_TTY:
+
+	     If FROM_TTY is true, meaning that this command was 
+	     typed interactively by the user, then give an error
+	     and DO NOT change the state of traceframe_number etc.
+
+	     However if FROM_TTY is false, meaning that we're either
+	     in a script, a loop, or a user-defined command, then 
+	     DON'T give an error, but DO change the state of
+	     traceframe_number etc. to invalid.
+
+	     The rationalle is that if you typed the command, you
+	     might just have committed a typo or something, and you'd
+	     like to NOT lose your current debugging state.  However
+	     if you're in a user-defined command or especially in a
+	     loop, then you need a way to detect that the command
+	     failed WITHOUT aborting.  This allows you to write
+	     scripts that search thru the trace buffer until the end,
+	     and then continue on to do something else.  */
+
+	  if (from_tty)
+	    error ("Target failed to find requested trace frame.");
+	  else
+	    {
+	      if (info_verbose)
+		printf_filtered ("End of trace buffer.\n");
+	      /* The following will not recurse, since it's special-cased */
+	      trace_find_command ("-1", from_tty);
+	      reply = NULL;	/* break out of loop, 
+				   (avoid recursive nonsense) */
+	    }
+	}
+      break;
+    case 'T':
+      if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
+	error ("Target failed to find requested trace frame.");
+      break;
+    case 'O':	/* "OK"? */
+      if (reply[1] == 'K' && reply[2] == '\0')
+	reply += 2;
+      else
+	error ("Bogus reply from target: %s", reply);
+      break;
+    default:
+      error ("Bogus reply from target: %s", reply);
+    }
+
+  flush_cached_frames ();
+  registers_changed ();
+  select_frame (get_current_frame (), 0);
+  set_traceframe_num (target_frameno);
+  set_tracepoint_num (target_tracept);
+  if (target_frameno == -1)
+    set_traceframe_context (-1);
+  else
+    set_traceframe_context (read_pc ());
+
+  if (from_tty)
+    {
+      int source_only;
+
+      /* NOTE: in immitation of the step command, try to determine
+	 whether we have made a transition from one function to another.
+	 If so, we'll print the "stack frame" (ie. the new function and
+	 it's arguments) -- otherwise we'll just show the new source line.
+
+	 This determination is made by checking (1) whether the current
+	 function has changed, and (2) whether the current FP has changed.
+	 Hack: if the FP wasn't collected, either at the current or the
+	 previous frame, assume that the FP has NOT changed.  */
+
+      if (old_func       == find_pc_function (read_pc ()) &&
+	 (old_frame_addr == 0 ||
+	  FRAME_FP (get_current_frame ()) == 0 ||
+	  old_frame_addr == FRAME_FP (get_current_frame ())))
+	source_only = -1;
+      else
+	source_only =  1;
+
+      print_stack_frame (selected_frame, selected_frame_level, source_only);
+      do_displays ();
+    }
+}
+
+/* trace_find_command takes a trace frame number n, 
+   sends "QTFrame:<n>" to the target, 
+   and accepts a reply that may contain several optional pieces
+   of information: a frame number, a tracepoint number, and an
+   indication of whether this is a trap frame or a stepping frame.
+
+   The minimal response is just "OK" (which indicates that the 
+   target does not give us a frame number or a tracepoint number).
+   Instead of that, the target may send us a string containing
+   any combination of:
+	F<hexnum>	(gives the selected frame number)
+	T<hexnum>	(gives the selected tracepoint number)
+   */
+
+/* tfind command */
+static void
+trace_find_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  /* this should only be called with a numeric argument */
+  int frameno = -1;
+  char *tmp;
+
+  if (target_is_remote ())
+    {
+      if (trace_find_hook)
+	trace_find_hook (args, from_tty);  
+      
+      if (args == 0 || *args == 0)
+	{ /* TFIND with no args means find NEXT trace frame. */
+	  if (traceframe_number == -1)
+	    frameno = 0;	/* "next" is first one */
+	  else
+	    frameno = traceframe_number + 1;
+	}
+      else if (0 == strcmp (args, "-"))
+	{
+	  if (traceframe_number == -1)
+	    error ("not debugging trace buffer");
+	  else if (from_tty && traceframe_number == 0)
+	    error ("already at start of trace buffer");
+
+	  frameno = traceframe_number - 1;
+	}
+      else
+	frameno = parse_and_eval_address (args);
+
+      if (frameno < -1)
+	error ("invalid input (%d is less than zero)", frameno);
+
+      sprintf (target_buf, "QTFrame:%x", frameno);
+      finish_tfind_command (target_buf, from_tty);
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+/* tfind end */
+static void
+trace_find_end_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  trace_find_command ("-1", from_tty);
+}
+
+/* tfind none */
+static void
+trace_find_none_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  trace_find_command ("-1", from_tty);
+}
+
+/* tfind start */
+static void
+trace_find_start_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  trace_find_command ("0", from_tty);
+}
+
+/* tfind pc command */
+static void
+trace_find_pc_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  CORE_ADDR pc;
+  char *tmp;
+
+  if (target_is_remote ())
+    {
+      if (args == 0 || *args == 0)
+	pc = read_pc ();	/* default is current pc */
+      else
+	pc = parse_and_eval_address (args);
+
+      sprintf (target_buf, "QTFrame:pc:%x", pc);
+      finish_tfind_command (target_buf, from_tty);
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+/* tfind tracepoint command */
+static void
+trace_find_tracepoint_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  int tdp;
+  char buf[40], *tmp;
+
+  if (target_is_remote ())
+    {
+      if (args == 0 || *args == 0)
+	if (tracepoint_number == -1)
+	  error ("No current tracepoint -- please supply an argument.");
+	else
+	  tdp = tracepoint_number;	/* default is current TDP */
+      else
+	tdp = parse_and_eval_address (args);
+
+      sprintf (target_buf, "QTFrame:tdp:%x", tdp);
+      finish_tfind_command (target_buf, from_tty);
+    }
+  else
+    error ("Trace can only be run on remote targets.");
+}
+
+/* TFIND LINE command:
+ 
+   This command will take a sourceline for argument, just like BREAK
+   or TRACE (ie. anything that "decode_line_1" can handle).  
+   
+   With no argument, this command will find the next trace frame 
+   corresponding to a source line OTHER THAN THE CURRENT ONE.  */
+
+static void
+trace_find_line_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  static CORE_ADDR start_pc, end_pc;
+  struct symtabs_and_lines sals;
+  struct symtab_and_line sal;
+  char *tmp;
+  struct cleanup *old_chain;
+
+  if (target_is_remote ())
+    {
+      if (args == 0 || *args == 0)
+	{
+	  sal = find_pc_line ((get_current_frame ())->pc, 0);
+	  sals.nelts = 1;
+	  sals.sals = (struct symtab_and_line *)
+	    xmalloc (sizeof (struct symtab_and_line));
+	  sals.sals[0] = sal;
+	}
+      else
+	{
+	  sals = decode_line_spec (args, 1);
+	  sal  = sals.sals[0];
+	}
+
+      old_chain = make_cleanup (free, sals.sals);
+      if (sal.symtab == 0)
+	{
+	  printf_filtered ("TFIND: No line number information available");
+	  if (sal.pc != 0)
+	    {
+	      /* This is useful for "info line *0x7f34".  If we can't tell the
+		 user about a source line, at least let them have the symbolic
+		 address.  */
+	      printf_filtered (" for address ");
+	      wrap_here ("  ");
+	      print_address (sal.pc, gdb_stdout);
+	      printf_filtered (";\n -- will attempt to find by PC. \n");
+	    }
+	  else
+	    {
+	      printf_filtered (".\n");
+	      return;	/* no line, no PC; what can we do? */
+	    }
+	}
+      else if (sal.line > 0
+	       && find_line_pc_range (sal, &start_pc, &end_pc))
+	{
+	  if (start_pc == end_pc)
+	    {
+	      printf_filtered ("Line %d of \"%s\"",
+			       sal.line, sal.symtab->filename);
+	      wrap_here ("  ");
+	      printf_filtered (" is at address ");
+	      print_address (start_pc, gdb_stdout);
+	      wrap_here ("  ");
+	      printf_filtered (" but contains no code.\n");
+	      sal = find_pc_line (start_pc, 0);
+	      if (sal.line > 0 &&
+		  find_line_pc_range (sal, &start_pc, &end_pc) &&
+		  start_pc != end_pc)
+		printf_filtered ("Attempting to find line %d instead.\n",
+				 sal.line);
+	      else
+		error ("Cannot find a good line.");
+	    }
+	}
+      else
+	/* Is there any case in which we get here, and have an address
+	   which the user would want to see?  If we have debugging symbols
+	   and no line numbers?  */
+	error ("Line number %d is out of range for \"%s\".\n",
+	       sal.line, sal.symtab->filename);
+
+      if (args && *args)	/* find within range of stated line */
+	sprintf (target_buf, "QTFrame:range:%x:%x", start_pc, end_pc - 1);
+      else			/* find OUTSIDE OF range of CURRENT line */
+	sprintf (target_buf, "QTFrame:outside:%x:%x", start_pc, end_pc - 1);
+      finish_tfind_command (target_buf, from_tty);
+      do_cleanups (old_chain);
+    }
+  else
+      error ("Trace can only be run on remote targets.");
+}
+
+/* tfind range command */
+static void
+trace_find_range_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  static CORE_ADDR start, stop;
+  char *tmp;
+
+  if (target_is_remote ())
+    {
+      if (args == 0 || *args == 0)
+	{ /* XXX FIXME: what should default behavior be? */
+	  printf_filtered ("Usage: tfind range <startaddr>,<endaddr>\n");
+	  return;
+	}
+
+      if (0 != (tmp = strchr (args, ',' )))
+	{
+	  *tmp++ = '\0';	/* terminate start address */
+	  while (isspace (*tmp))
+	    tmp++;
+	  start = parse_and_eval_address (args);
+	  stop  = parse_and_eval_address (tmp);
+	}
+      else
+	{ /* no explicit end address? */
+	  start = parse_and_eval_address (args);
+	  stop  = start + 1; /* ??? */
+	}
+
+      sprintf (target_buf, "QTFrame:range:%x:%x", start, stop);
+      finish_tfind_command (target_buf, from_tty);
+    }
+  else
+      error ("Trace can only be run on remote targets.");
+}
+
+/* tfind outside command */
+static void
+trace_find_outside_command (args, from_tty)
+     char *args;
+     int from_tty;
+{ /* STUB_COMM PART_IMPLEMENTED */
+  CORE_ADDR start, stop;
+  char *tmp;
+
+  if (target_is_remote ())
+    {
+      if (args == 0 || *args == 0)
+	{ /* XXX FIXME: what should default behavior be? */
+	  printf_filtered ("Usage: tfind outside <startaddr>,<endaddr>\n");
+	  return;
+	}
+
+      if (0 != (tmp = strchr (args, ',' )))
+	{
+	  *tmp++ = '\0';	/* terminate start address */
+	  while (isspace (*tmp))
+	    tmp++;
+	  start = parse_and_eval_address (args);
+	  stop  = parse_and_eval_address (tmp);
+	}
+      else
+	{ /* no explicit end address? */
+	  start = parse_and_eval_address (args);
+	  stop  = start + 1; /* ??? */
+	}
+
+      sprintf (target_buf, "QTFrame:outside:%x:%x", start, stop);
+      finish_tfind_command (target_buf, from_tty);
+    }
+  else
+      error ("Trace can only be run on remote targets.");
+}
+
+/* save-tracepoints command */
+static void
+tracepoint_save_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct tracepoint  *tp;
+  struct action_line *line;
+  FILE *fp;
+  char *i1 = "    ", *i2 = "      ";
+  char *indent, *actionline;
+
+  if (args == 0 || *args == 0)
+    error ("Argument required (file name in which to save tracepoints");
+
+  if (tracepoint_chain == 0)
+    {
+      warning ("save-tracepoints: no tracepoints to save.\n");
+      return;
+    }
+
+  if (!(fp = fopen (args, "w")))
+    error ("Unable to open file '%s' for saving tracepoints");
+
+  ALL_TRACEPOINTS (tp)
+    {
+      if (tp->addr_string)
+	fprintf (fp, "trace %s\n", tp->addr_string);
+      else
+	fprintf (fp, "trace *0x%x\n", tp->address);
+
+      if (tp->pass_count)
+	fprintf (fp, "  passcount %d\n", tp->pass_count);
+
+      if (tp->actions)
+	{
+	  fprintf (fp, "  actions\n");
+	  indent = i1;
+	  for (line = tp->actions; line; line = line->next)
+	    {
+	      struct cmd_list_element *cmd;
+
+	      QUIT;			/* allow user to bail out with ^C */
+	      actionline = line->action;
+	      while (isspace(*actionline))
+		actionline++;
+
+	      fprintf (fp, "%s%s\n", indent, actionline);
+	      if (*actionline != '#')	/* skip for comment lines */
+		{
+		  cmd = lookup_cmd (&actionline, cmdlist, "", -1, 1);
+		  if (cmd == 0)
+		    error ("Bad action list item: %s", actionline);
+		  if (cmd->function.cfunc == while_stepping_pseudocommand)
+		    indent = i2;
+		  else if (cmd->function.cfunc == end_actions_pseudocommand)
+		    indent = i1;
+		}
+	    }
+	}
+    }
+  fclose (fp);
+  if (from_tty)
+    printf_filtered ("Tracepoints saved to file '%s'.\n", args);
+  return;
+}
+
+/* info scope command: list the locals for a scope.  */
+static void
+scope_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct symtab_and_line sal;
+  struct symtabs_and_lines sals;
+  struct symbol *sym;
+  struct minimal_symbol *msym;
+  struct block *block;
+  char **canonical, *symname, *save_args = args;
+  int i, j, nsyms, count = 0;
+
+  if (args == 0 || *args == 0)
+    error ("requires an argument (function, line or *addr) to define a scope");
+
+  sals = decode_line_1 (&args, 1, NULL, 0, &canonical);
+  if (sals.nelts == 0)
+    return;		/* presumably decode_line_1 has already warned */
+
+  /* Resolve line numbers to PC */
+  resolve_sal_pc (&sals.sals[0]);
+  block = block_for_pc (sals.sals[0].pc);
+
+  while (block != 0)
+    {
+      QUIT;				/* allow user to bail out with ^C */
+      nsyms = BLOCK_NSYMS (block);
+      for (i = 0; i < nsyms; i++)
+	{
+	  QUIT;				/* allow user to bail out with ^C */
+	  if (count == 0)
+	    printf_filtered ("Scope for %s:\n", save_args);
+	  count++;
+	  sym = BLOCK_SYM (block, i);
+	  symname = SYMBOL_NAME (sym);
+	  if (symname == NULL || *symname == '\0')
+	    continue;	/* probably botched, certainly useless */
+
+	  printf_filtered ("Symbol %s is ", symname);
+	  switch (SYMBOL_CLASS (sym)) {
+	  default:
+	  case LOC_UNDEF:		/* messed up symbol? */
+	    printf_filtered ("a bogus symbol, class %d.\n", 
+			     SYMBOL_CLASS (sym));
+	    count--;			/* don't count this one */
+	    continue;
+	  case LOC_CONST:
+	    printf_filtered ("a constant with value %d (0x%x)", 
+			     SYMBOL_VALUE (sym), SYMBOL_VALUE (sym));
+	    break;
+	  case LOC_CONST_BYTES:
+	    printf_filtered ("constant bytes: ");
+	    if (SYMBOL_TYPE (sym))
+	      for (j = 0; j < TYPE_LENGTH (SYMBOL_TYPE (sym)); j++)
+		fprintf_filtered (gdb_stdout, " %02x",
+				  (unsigned) SYMBOL_VALUE_BYTES (sym) [j]);
+  	    break;
+	  case LOC_STATIC:
+	    printf_filtered ("in static storage at address ");
+	    print_address_numeric (SYMBOL_VALUE_ADDRESS (sym), 1, gdb_stdout);
+	    break;
+	  case LOC_REGISTER:
+	    printf_filtered ("a local variable in register $%s",
+			     REGISTER_NAME (SYMBOL_VALUE (sym)));
+	    break;
+	  case LOC_ARG:
+	  case LOC_LOCAL_ARG:
+	    printf_filtered ("an argument at stack/frame offset %ld",
+			     SYMBOL_VALUE (sym));
+	    break;
+	  case LOC_LOCAL:
+	    printf_filtered ("a local variable at frame offset %ld",
+			     SYMBOL_VALUE (sym));
+	    break;
+	  case LOC_REF_ARG:
+	    printf_filtered ("a reference argument at offset %ld",
+			     SYMBOL_VALUE (sym));
+	    break;
+	  case LOC_REGPARM:
+	    printf_filtered ("an argument in register $%s",
+			     REGISTER_NAME (SYMBOL_VALUE (sym)));
+	    break;
+	  case LOC_REGPARM_ADDR:
+	    printf_filtered ("the address of an argument, in register $%s",
+			     REGISTER_NAME (SYMBOL_VALUE (sym)));
+	    break;
+	  case LOC_TYPEDEF:
+	    printf_filtered ("a typedef.\n");
+	    continue;
+	  case LOC_LABEL:
+	    printf_filtered ("a label at address ");
+	    print_address_numeric (SYMBOL_VALUE_ADDRESS (sym), 1, gdb_stdout);
+	    break;
+	  case LOC_BLOCK:
+	    printf_filtered ("a function at address ");
+	    print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (sym)), 1,
+				   gdb_stdout);
+	    break;
+	  case LOC_BASEREG:
+	    printf_filtered ("a variable at offset %d from register $%s",
+			     SYMBOL_VALUE (sym),
+			     REGISTER_NAME  (SYMBOL_BASEREG (sym)));
+	    break;
+	  case LOC_BASEREG_ARG:
+	    printf_filtered ("an argument at offset %d from register $%s",
+			     SYMBOL_VALUE (sym),
+			     REGISTER_NAME  (SYMBOL_BASEREG (sym)));
+	    break;
+	  case LOC_UNRESOLVED:
+	    msym = lookup_minimal_symbol (SYMBOL_NAME (sym), NULL, NULL);
+	    if (msym == NULL)
+	      printf_filtered ("Unresolved Static");
+	    else
+	      {
+		printf_filtered ("static storage at address ");
+		print_address_numeric (SYMBOL_VALUE_ADDRESS (msym), 1, 
+				       gdb_stdout);
+	      }
+	    break;
+	  case LOC_OPTIMIZED_OUT:
+	    printf_filtered ("optimized out.\n");
+	    continue;
+	  }
+	  if (SYMBOL_TYPE (sym))
+	    printf_filtered (", length %d.\n", 
+			     TYPE_LENGTH (check_typedef (SYMBOL_TYPE (sym))));
+	}
+      if (BLOCK_FUNCTION (block))
+	break;
+      else
+	block = BLOCK_SUPERBLOCK (block);
+    }
+  if (count <= 0)
+    printf_filtered ("Scope for %s contains no locals or arguments.\n",
+		     save_args);
+}
+
+/* worker function (cleanup) */
+static void
+replace_comma (comma)
+     char *comma;
+{
+  *comma = ',';
+}
+
+/* tdump command */
+static void
+trace_dump_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct tracepoint  *t;
+  struct action_line *action;
+  char               *action_exp, *next_comma;
+  struct cleanup     *old_cleanups;
+  int                 stepping_actions = 0;
+  int                 stepping_frame   = 0;
+
+  if (!target_is_remote ())
+    {
+      error ("Trace can only be run on remote targets.");
+      return;
+    }
+
+  if (tracepoint_number == -1)
+    {
+      warning ("No current trace frame.");
+      return;
+    }
+
+  ALL_TRACEPOINTS (t)
+    if (t->number == tracepoint_number)
+      break;
+
+  if (t == NULL)
+    error ("No known tracepoint matches 'current' tracepoint #%d.", 
+	   tracepoint_number);
+
+  old_cleanups = make_cleanup (null_cleanup, NULL);
+
+  printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n", 
+		   tracepoint_number, traceframe_number);
+
+  /* The current frame is a trap frame if the frame PC is equal
+     to the tracepoint PC.  If not, then the current frame was
+     collected during single-stepping.  */
+
+  stepping_frame = (t->address != read_pc());
+
+  for (action = t->actions; action; action = action->next)
+    {
+      struct cmd_list_element *cmd;
+
+      QUIT;				/* allow user to bail out with ^C */
+      action_exp = action->action;
+      while (isspace (*action_exp))
+	action_exp++;
+
+      /* The collection actions to be done while stepping are
+	 bracketed by the commands "while-stepping" and "end".  */
+
+      if (*action_exp == '#')	/* comment line */
+	continue;
+
+      cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
+      if (cmd == 0)
+	error ("Bad action list item: %s", action_exp);
+
+      if (cmd->function.cfunc == while_stepping_pseudocommand)
+	stepping_actions = 1;
+      else if (cmd->function.cfunc == end_actions_pseudocommand)
+	stepping_actions = 0;
+      else if (cmd->function.cfunc == collect_pseudocommand)
+	{
+	  /* Display the collected data.
+	     For the trap frame, display only what was collected at the trap.
+	     Likewise for stepping frames, display only what was collected
+	     while stepping.  This means that the two boolean variables,
+	     STEPPING_FRAME and STEPPING_ACTIONS should be equal.  */
+	  if (stepping_frame == stepping_actions)
+	    {
+	      do { /* repeat over a comma-separated list */
+		QUIT;		/* allow user to bail out with ^C */
+		if (*action_exp == ',')
+		  action_exp++;
+		while (isspace (*action_exp))
+		  action_exp++;
+
+		next_comma = strchr (action_exp, ',');
+
+		if      (0 == strncasecmp (action_exp, "$reg", 4))
+		  registers_info (NULL, from_tty);
+		else if (0 == strncasecmp (action_exp, "$loc", 4))
+		  locals_info (NULL, from_tty);
+		else if (0 == strncasecmp (action_exp, "$arg", 4))
+		  args_info (NULL, from_tty);
+		else
+		  { /* variable */
+		    if (next_comma)
+		      {
+			make_cleanup (replace_comma, next_comma);
+			*next_comma = '\0';
+		      }
+		    printf_filtered ("%s = ", action_exp);
+		    output_command (action_exp, from_tty);
+		    printf_filtered ("\n");
+		  }
+		if (next_comma)
+		  *next_comma = ',';
+		action_exp = next_comma;
+	      } while (action_exp && *action_exp == ',');
+	    }
+	}
+    }
+  discard_cleanups (old_cleanups);
+}
+
+/* Convert the memory pointed to by mem into hex, placing result in buf.
+ * Return a pointer to the last char put in buf (null)
+ * "stolen" from sparc-stub.c
+ */
+
+static const char hexchars[]="0123456789abcdef";
+
+static unsigned char *
+mem2hex(mem, buf, count)
+     unsigned char *mem;
+     unsigned char *buf;
+     int count;
+{
+  unsigned char ch;
+
+  while (count-- > 0)
+    {
+      ch = *mem++;
+
+      *buf++ = hexchars[ch >> 4];
+      *buf++ = hexchars[ch & 0xf];
+    }
+
+  *buf = 0;
+
+  return buf;
+}
+
+int get_traceframe_number()
+{
+ return traceframe_number;
+}
+
+
+/* module initialization */
+void
+_initialize_tracepoint ()
+{
+  tracepoint_chain  = 0;
+  tracepoint_count  = 0;
+  traceframe_number = -1;
+  tracepoint_number = -1;
+
+  set_internalvar (lookup_internalvar ("tpnum"), 
+		   value_from_longest (builtin_type_int, (LONGEST) 0));
+  set_internalvar (lookup_internalvar ("trace_frame"), 
+		   value_from_longest (builtin_type_int, (LONGEST) -1));
+
+  if (tracepoint_list.list == NULL)
+    {
+      tracepoint_list.listsize = 128;
+      tracepoint_list.list = xmalloc 
+	(tracepoint_list.listsize * sizeof (struct memrange));
+    }
+  if (tracepoint_list.aexpr_list == NULL)
+    {
+      tracepoint_list.aexpr_listsize = 128;
+      tracepoint_list.aexpr_list = xmalloc
+	(tracepoint_list.aexpr_listsize * sizeof (struct agent_expr *));
+    }
+
+  if (stepping_list.list == NULL)
+    {
+      stepping_list.listsize = 128;
+      stepping_list.list = xmalloc 
+	(stepping_list.listsize * sizeof (struct memrange));
+    }
+
+  if (stepping_list.aexpr_list == NULL)
+    {
+      stepping_list.aexpr_listsize = 128;
+      stepping_list.aexpr_list = xmalloc
+	(stepping_list.aexpr_listsize * sizeof (struct agent_expr *));
+    }
+
+  add_info ("scope", scope_info, 
+	    "List the variables local to a scope");
+
+  add_cmd ("tracepoints", class_trace, NO_FUNCTION, 
+	   "Tracing of program execution without stopping the program.", 
+	   &cmdlist);
+
+  add_info ("tracepoints", tracepoints_info,
+	    "Status of tracepoints, or tracepoint number NUMBER.\n\
+Convenience variable \"$tpnum\" contains the number of the\n\
+last tracepoint set.");
+
+  add_info_alias ("tp", "tracepoints", 1);
+
+  add_com ("save-tracepoints", class_trace, tracepoint_save_command, 
+	   "Save current tracepoint definitions as a script.\n\
+Use the 'source' command in another debug session to restore them.");
+
+  add_com ("tdump", class_trace, trace_dump_command, 
+	   "Print everything collected at the current tracepoint.");
+
+  add_prefix_cmd ("tfind",  class_trace, trace_find_command,
+		  "Select a trace frame;\n\
+No argument means forward by one frame; '-' meand backward by one frame.",
+		  &tfindlist, "tfind ", 1, &cmdlist);
+
+  add_cmd ("outside", class_trace, trace_find_outside_command,
+	   "Select a trace frame whose PC is outside the given \
+range.\nUsage: tfind outside addr1, addr2", 
+	   &tfindlist);
+
+  add_cmd ("range", class_trace, trace_find_range_command,
+	   "Select a trace frame whose PC is in the given range.\n\
+Usage: tfind range addr1,addr2", 
+	   &tfindlist);
+
+  add_cmd ("line", class_trace, trace_find_line_command,
+	   "Select a trace frame by source line.\n\
+Argument can be a line number (with optional source file), \n\
+a function name, or '*' followed by an address.\n\
+Default argument is 'the next source line that was traced'.",
+	   &tfindlist);
+
+  add_cmd ("tracepoint", class_trace, trace_find_tracepoint_command,
+	   "Select a trace frame by tracepoint number.\n\
+Default is the tracepoint for the current trace frame.",
+	   &tfindlist);
+
+  add_cmd ("pc", class_trace, trace_find_pc_command,
+	   "Select a trace frame by PC.\n\
+Default is the current PC, or the PC of the current trace frame.",
+	   &tfindlist);
+
+  add_cmd ("end", class_trace, trace_find_end_command,
+	   "Synonym for 'none'.\n\
+De-select any trace frame and resume 'live' debugging.",
+	   &tfindlist);
+
+  add_cmd ("none", class_trace, trace_find_none_command,
+	   "De-select any trace frame and resume 'live' debugging.",
+	   &tfindlist);
+
+  add_cmd ("start", class_trace, trace_find_start_command,
+	   "Select the first trace frame in the trace buffer.",
+	   &tfindlist);
+
+  add_com ("tstatus",  class_trace, trace_status_command,
+	   "Display the status of the current trace data collection.");
+
+  add_com ("tstop",  class_trace, trace_stop_command,
+	   "Stop trace data collection.");
+
+  add_com ("tstart", class_trace, trace_start_command,
+	   "Start trace data collection.");
+
+  add_com ("passcount", class_trace, trace_pass_command, 
+	   "Set the passcount for a tracepoint.\n\
+The trace will end when the tracepoint has been passed 'count' times.\n\
+Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n\
+if TPNUM is omitted, passcount refers to the last tracepoint defined.");
+
+  add_com ("end", class_trace, end_actions_pseudocommand,
+	   "Ends a list of commands or actions.\n\
+Several GDB commands allow you to enter a list of commands or actions.\n\
+Entering \"end\" on a line by itself is the normal way to terminate\n\
+such a list.\n\n\
+Note: the \"end\" command cannot be used at the gdb prompt.");
+
+  add_com ("while-stepping", class_trace, while_stepping_pseudocommand,
+	   "Specify single-stepping behavior at a tracepoint.\n\
+Argument is number of instructions to trace in single-step mode\n\
+following the tracepoint.  This command is normally followed by\n\
+one or more \"collect\" commands, to specify what to collect\n\
+while single-stepping.\n\n\
+Note: this command can only be used in a tracepoint \"actions\" list.");
+
+  add_com_alias ("ws",         "while-stepping", class_alias, 0);
+  add_com_alias ("stepping",   "while-stepping", class_alias, 0);
+
+  add_com ("collect", class_trace, collect_pseudocommand, 
+	   "Specify one or more data items to be collected at a tracepoint.\n\
+Accepts a comma-separated list of (one or more) expressions.  GDB will\n\
+collect all data (variables, registers) referenced by that expression.\n\
+Also accepts the following special arguments:\n\
+    $regs   -- all registers.\n\
+    $args   -- all function arguments.\n\
+    $locals -- all variables local to the block/function scope.\n\
+Note: this command can only be used in a tracepoint \"actions\" list.");
+
+  add_com ("actions", class_trace, trace_actions_command,
+	   "Specify the actions to be taken at a tracepoint.\n\
+Tracepoint actions may include collecting of specified data, \n\
+single-stepping, or enabling/disabling other tracepoints, \n\
+depending on target's capabilities.");
+
+  add_cmd ("tracepoints", class_trace, delete_trace_command, 
+	   "Delete specified tracepoints.\n\
+Arguments are tracepoint numbers, separated by spaces.\n\
+No argument means delete all tracepoints.",
+	   &deletelist);
+
+  add_cmd ("tracepoints", class_trace, disable_trace_command, 
+	   "Disable specified tracepoints.\n\
+Arguments are tracepoint numbers, separated by spaces.\n\
+No argument means disable all tracepoints.",
+	   &disablelist);
+
+  add_cmd ("tracepoints", class_trace, enable_trace_command, 
+	   "Enable specified tracepoints.\n\
+Arguments are tracepoint numbers, separated by spaces.\n\
+No argument means enable all tracepoints.",
+	   &enablelist);
+
+  add_com ("trace", class_trace, trace_command,
+	   "Set a tracepoint at a specified line or function or address.\n\
+Argument may be a line number, function name, or '*' plus an address.\n\
+For a line number or function, trace at the start of its code.\n\
+If an address is specified, trace at that exact address.\n\n\
+Do \"help tracepoints\" for info on other tracepoint commands.");
+
+  add_com_alias ("tp",   "trace", class_alias, 0);
+  add_com_alias ("tr",   "trace", class_alias, 1);
+  add_com_alias ("tra",  "trace", class_alias, 1);
+  add_com_alias ("trac", "trace", class_alias, 1);
+}
+
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
new file mode 100644
index 0000000..4c1ee82
--- /dev/null
+++ b/gdb/tracepoint.h
@@ -0,0 +1,137 @@
+/* Data structures associated with tracepoints in GDB.
+   Copyright (C) 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (TRACEPOINT_H)
+#define TRACEPOINT_H 1
+
+#if !defined (BREAKPOINT_H)
+enum enable { disabled, enabled };
+#endif
+/* The data structure for an action: */
+struct action_line 
+{
+  struct action_line *next;
+  char *action;
+};
+
+/* The data structure for a tracepoint: */
+
+struct tracepoint
+{
+  struct tracepoint *next;
+
+  enum enable enabled;
+
+#if 0
+  /* Type of tracepoint (MVS FIXME: needed?). */
+  enum tptype type;
+
+  /* What to do with this tracepoint after we hit it MVS FIXME: needed?). */
+  enum tpdisp disposition;
+#endif
+  /* Number assigned to distinguish tracepoints.  */
+  int number;
+
+  /* Address to trace at, or NULL if not an instruction tracepoint (MVS ?). */
+  CORE_ADDR address;
+
+  /* Line number of this address.  Only matters if address is non-NULL.  */
+  int line_number;
+
+  /* Source file name of this address.  Only matters if address is non-NULL. */
+  char *source_file;
+
+  /* Number of times this tracepoint should single-step 
+     and collect additional data */
+  long step_count;
+
+  /* Number of times this tracepoint should be hit before disabling/ending. */
+  int pass_count;
+  
+  /* Chain of action lines to execute when this tracepoint is hit. */
+  struct action_line *actions;
+
+  /* Conditional (MVS ?).  */
+  struct expression *cond;
+
+  /* String we used to set the tracepoint (malloc'd).  Only matters if
+     address is non-NULL.  */
+  char *addr_string;
+
+  /* Language we used to set the tracepoint.  */
+  enum language language;
+
+  /* Input radix we used to set the tracepoint.  */
+  int input_radix;
+
+  /* Count of the number of times this tracepoint was taken, dumped
+     with the info, but not used for anything else.  Useful for
+     seeing how many times you hit a tracepoint prior to the program
+     aborting, so you can back up to just before the abort.  */
+  int hit_count;
+
+  /* Thread number for thread-specific tracepoint, or -1 if don't care */ 
+  int thread;
+
+  /* BFD section, in case of overlays: 
+     no, I don't know if tracepoints are really gonna work with overlays.  */
+  asection *section;
+};
+
+enum actionline_type
+{
+  BADLINE  = -1,
+  GENERIC  =  0,
+  END      =  1,
+  STEPPING =  2
+};
+
+
+/* The tracepont chain of all tracepoints */
+
+extern struct tracepoint *tracepoint_chain;
+
+extern unsigned long trace_running_p;
+
+/* A hook used to notify the UI of tracepoint operations */
+
+void (*create_tracepoint_hook) PARAMS ((struct tracepoint *));
+void (*delete_tracepoint_hook) PARAMS ((struct tracepoint *));
+void (*modify_tracepoint_hook) PARAMS ((struct tracepoint *));
+void (*trace_find_hook) PARAMS ((char *arg, int from_tty));
+void (*trace_start_stop_hook) PARAMS ((int start, int from_tty));
+
+struct tracepoint *get_tracepoint_by_number PARAMS ((char **));
+int get_traceframe_number PARAMS ((void));
+void  free_actions PARAMS((struct tracepoint *));
+enum actionline_type validate_actionline PARAMS((char **,
+                                                        struct tracepoint *));
+
+
+/* Walk the following statement or block through all tracepoints.
+   ALL_TRACEPOINTS_SAFE does so even if the statment deletes the current
+   breakpoint.  */
+
+#define ALL_TRACEPOINTS(t)  for (t = tracepoint_chain; t; t = t->next)
+
+#define ALL_TRACEPOINTS_SAFE(t,tmp)	\
+	for (t = tracepoint_chain;	\
+	     t ? (tmp = t->next, 1) : 0;\
+	     t = tmp)
+#endif /* TRACEPOINT_H */
diff --git a/gdb/tui/ChangeLog b/gdb/tui/ChangeLog
new file mode 100644
index 0000000..7dc1bf6
--- /dev/null
+++ b/gdb/tui/ChangeLog
@@ -0,0 +1,121 @@
+1999-01-26  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* tui.h: Include stdarg.h instead of varargs.h if we're on an ISO Cish
+	system.
+
+Thu Dec 31 12:08:32 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Jim Blandy <jimb@cygnus.com>,
+ 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
+ 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
+ 	Taylor <taylor@cygnus.com>, as part of the project to merge in
+ 	changes originally made by HP; HP did not create ChangeLog
+ 	entries.
+
+	* Makefile.in: New file; we're merging HP's changes into GDB, and
+ 	we've moved the TUI files into a subdirectory, so we need a new
+ 	Makefile.
+
+	* tui.c:
+	#include <term.h>, if we have it, to get declarations for
+ 	the termcap functions on Solaris.
+	(tgoto): Add external K&R declaration for this; Solaris doesn't
+	bother to actually declare it in their header files.
+	(_tuiReset): Ignore the #definition of TIOCGETC if USG is defined;
+ 	we'd rather use the USG mechanisms than the Berkeley mechanisms
+ 	(TIOCGETC is one of the Berkeley terminal control ioctls).
+  	Apologies if this causes trouble later; this should all be handled
+ 	by autoconf...
+	(strcat_to_buf, strcat_to_buf_with_fmt): New functions, moved here
+ 	from ../utils.h.
+	(tuiFree): replace safe_free with free.
+	(strcat_to_buf): new function, copied from utils.c.
+	(tuiInit): Add ignored `argv0' argument, to match the type that
+ 	init_ui_hook expects; updated declaration.  Call the
+ 	initialize_tui_files function constructed above.  Initialize
+ 	flush_hook to NULL.
+	(tuiInitWindows): Call tuiSetLocatorContent, to get the first
+ 	element of the locator window's content allocated.  This seems
+ 	wrong, because it must have been initialized somehow in HP's
+ 	sources, and we should do it the same way now.  But we do get
+ 	further before it segfaults.  [Postscript: HP didn't bother to
+ 	initialize it; they compile
+	(va_catch_errors, vcatch_errors): Functions moved here from
+ 	../utils.c in HP's sources.  They're not used anywhere else.
+	(xdb_style): Delete this variable, and remove all references to
+ 	it.  It's always true.
+	(tuiInit, _tui_vDo): References removed.
+
+	* tui.h:  Add prototypes.
+	Don't #include "gendefs.h"; it's only used in the TUI.
+	Integrate its contents into this file:
+	#include <ansidecl.h> here.
+	(Opaque, OpaqueFuncPtr): Typedefs moved to here.
+	     
+	* tuiCommand.c: #include "defs.h", so we get the appropriate
+	definition of GDB_FILE.
+
+	* tuiData.c
+ 	(freeWindow): replace safe_free with free.
+	(tui_version): don't define it here; it's defined in main.c now.
+
+	* tuiDisassem.c
+	(tuiSetDisassemContent): Call strcat_address_numeric instead of
+ 	strcat_address.  Simplify the control structure. Use predefined
+ 	GDB function to print asm inst address.  Use GDB_FILE to collect
+ 	output into buffers.
+
+	* tuiIO.c
+	(tgoto): Add external K&R declaration for this here too.
+	(tuiGetc, tuiTermSetup, tuiTermUnsetup): Same.
+	(tuiPuts_unfiltered): change FILE to GDB_FILE.
+	(tui_tputs): fix prototype for 3rd argument.
+
+	* tuiIO.h (tuiPuts_unfiltered): change declaration.
+     
+	* tuiLayout.c 
+	(_tuiSetLayoutTo): for displaying registers, hook up the HP code
+	that decides which registers to display (i.e. single precision
+	float, double precision float, general, special). Previously,
+	only handled TUI_GENERAL_REGS. Now that the code is hooked up,
+ 	compiling with -z poses a problem. When the first layout command
+	is 'layout regs', dataWin->detail is a NULL pointer, and gdb
+	core dumps.
+
+	* tuiLayout.c (_tuiSetLayoutTo): replace safe_free with free.
+
+	* tuiRegs.c #include "defs.h" earlier, to avoid problems in
+ 	<stdarg.h>.  No idea exactly what's conflicting with what, but the
+ 	errors went away...
+	(_tuiRegisterFormat): Change so that function creates a GDB_FILE
+ 	object, calls pa_do_strcat_registers_info, copies the register
+ 	info into a buffer, and deallocates the GDB_FILE object.  Remove
+ 	some code that is not executed.  Also, call to
+ 	pa_do_strcat_registers_info has an additional parameter,
+ 	precision.  This code requires some new per-target functions that
+ 	we don't want to merge.  Dyke it out, with #ifdef
+ 	TUI_EXTENDED_FORMATTERS.
+	(_tuiSetSpecialRegsContent): this function was ifdefed out.
+  	Hooked this up.
+	(_tuiSetGeneralAndSpecialRegsContent): this function was ifdefed
+ 	out.  Hooked it up.
+  	(IS_64BIT): Just define this to be zero; we're not merging in the
+ 	64-bit support.
+	(tuiShowRegisters): Comment out all references to the "special"
+ 	regs; we don't have a distinction between the "special" and
+ 	"non-special" regs in most of our machine descriptions.  This code
+ 	is PA-specific in other ways as well, and needs to be redesigned
+ 	to be portable to other processors.
+
+	* tuiWin.c: #include <string.h>, to get a declaration for
+	strchr.
+ 
+	* tui.c, tuiCommand.c, tuiData.c, tuiDataWin.c, tuiDisassem.c,
+ 	tuiGeneralWin.c, tuiIO.c, tuiLayout.c, tuiRegs.c, tuiSource.c,
+ 	tuiSourceWin.c, tuiStack.c, tuiWin.c: New files (from HP).  Changed
+ 	bool to int throughout.  Re-indented, GNU style.
+
+	* tui.h, tuiCommand.h, tuiData.h, tuiDataWin.h, tuiDisassem.h,
+ 	tuiGeneralWin.h, tuiIO.h, tuiLayout.h, tuiRegs.h, tuiSource.h,
+ 	tuiSourceWin.h, tuiStack.h, tuiWin.h: new files (from HP).
+  	Changed bool to int throughout.
diff --git a/gdb/tui/Makefile.in b/gdb/tui/Makefile.in
new file mode 100644
index 0000000..256464b
--- /dev/null
+++ b/gdb/tui/Makefile.in
@@ -0,0 +1,168 @@
+# Copyright 1998 Free Software Foundation, Inc.
+
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+all: libtui.a
+
+srcdir=@srcdir@
+VPATH = @srcdir@
+
+SHELL = @SHELL@
+
+CC=@CC@
+CFLAGS=@CFLAGS@
+AR=@AR@
+RANLIB=@RANLIB@
+
+# Host and target-dependent makefile fragments come in here.
+@host_makefile_frag@
+@target_makefile_frag@
+# End of host and target-dependent makefile fragments
+
+# Where is our "include" directory?  Typically $(srcdir)/../include.
+# This is essentially the header file directory for the library
+# routines in libiberty.
+INCLUDE_DIR =  $(srcdir)/../../include
+INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
+
+# Configured by the --with-mmalloc option to configure.
+MMALLOC = @MMALLOC@
+MMALLOC_CFLAGS = @MMALLOC_CFLAGS@
+
+# Where is the BFD library?  Typically in ../bfd.
+BFD_DIR = ../../bfd
+BFD_SRC = $(srcdir)/$(BFD_DIR)
+BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
+
+# Where is the READLINE library?  Typically in ../readline.
+READLINE_DIR = ../../readline
+READLINE_SRC = $(srcdir)/$(READLINE_DIR)
+READLINE_CFLAGS = -I$(READLINE_SRC)
+
+# Where is the INTL library?  Typically in ../intl.
+INTL_DIR = ../../intl
+INTL_SRC = $(srcdir)/$(INTL_DIR)
+INTL_CFLAGS = -I$(INTL_DIR) -I$(INTL_SRC)
+
+# Where is the TCL library?  Typically in ../tcl.
+TCL_CFLAGS = @TCLHDIR@
+
+# Where is the TK library?  Typically in ../tk.
+TK_CFLAGS = @TKHDIR@ @TK_BUILD_INCLUDES@
+
+# Where is Itcl?  Typically in ../itcl.
+ITCL_CFLAGS = @ITCLHDIR@
+
+# Where is Tix?  Typically in ../tix.
+TIX_CFLAGS = @TIXHDIR@
+
+X11_CFLAGS = @TK_XINCLUDES@
+
+ENABLE_IDE= @ENABLE_IDE@
+
+GUI_CFLAGS_X = -I$(srcdir)/../../libgui/src
+
+IDE_CFLAGS_X = -I$(srcdir)/../../libidetcl/src -I$(srcdir)/../../libide/src \
+  `if [ x"$(ENABLE_IDE)" != x ] ; then \
+    echo -DIDE -I$(srcdir)/../../ilu/runtime/mainloop;\
+  fi`
+
+IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
+
+ENABLE_CFLAGS= @ENABLE_CFLAGS@
+
+# -I. for config files.
+# -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
+# -I$(srcdir)/config for more generic config files.
+
+# It is also possible that you will need to add -I/usr/include/sys if
+# your system doesn't have fcntl.h in /usr/include (which is where it
+# should be according to Posix).
+DEFS = @DEFS@
+GDB_CFLAGS = -I. -I.. -I$(srcdir) -I$(srcdir)/.. -I$(srcdir)/../config $(DEFS)
+
+# M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
+# from the config directory.
+GLOBAL_CFLAGS = $(MT_CFLAGS) $(MH_CFLAGS)
+#PROFILE_CFLAGS = -pg
+
+# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
+INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
+	$(GDB_CFLAGS) $(READLINE_CFLAGS) $(BFD_CFLAGS) \
+	$(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(INTL_CFLAGS) \
+	$(ENABLE_CFLAGS)
+
+HEADERS = tuiIO.h tuiData.h tuiGeneralWin.h tuiLayout.h tuiStack.h \
+	  tuiSource.h tuiCommand.h tuiWin.h tuiDisassem.h \
+	  tuiSourceWin.h tuiRegs.h tuiDataWin.h
+
+SOURCES = tui.c tuiData.c tuiSource.c tuiStack.c tuiIO.c \
+	  tuiGeneralWin.c tuiLayout.c tuiWin.c tuiCommand.c \
+	  tuiDisassem.c tuiSourceWin.c tuiRegs.c tuiDataWin.c
+
+OBJECTS = tui.o tuiData.o tuiSource.o tuiStack.o tuiIO.o \
+	  tuiGeneralWin.o tuiLayout.o tuiWin.o tuiCommand.o \
+	  tuiDisassem.o tuiSourceWin.o tuiRegs.o tuiDataWin.o \
+	  tuiInit.o
+
+
+# Prevent Sun make from putting in the machine type.  Setting
+# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
+.c.o:
+	$(CC) -c $(INTERNAL_CFLAGS) $<
+.SUFFIXES: .cpp
+.c.cpp:
+	$(CC) -E $(INTERNAL_CFLAGS) $< > $@
+
+libtui.a: $(OBJECTS)
+	rm -f libtui.a
+	$(AR) rc libtui.a $(OBJECTS)
+	$(RANLIB) libtui.a
+
+tui.o: tui.c tui.h tuiData.h tuiLayout.h tuiIO.h tuiRegs.h tuiWin.h
+tuiCommand.o: tui.h tuiData.h tuiWin.h tuiIO.h
+tuiData.o: tui.h tuiData.h
+tuiDataWin.o: tui.h tuiData.h tuiRegs.h
+tuiDisassem.o: tui.h tuiData.h tuiLayout.h tuiSourceWin.h tuiStack.h
+tuiGeneralWin.o: tui.h tuiData.h tuiGeneralWin.h
+tuiIO.o: tui.h tuiData.h tuiIO.h tuiCommand.h tuiWin.h
+tuiLayout.o: tui.h tuiData.h tuiGeneralWin.h tuiStack.h tuiRegs.h \
+	tuiDisassem.h
+tuiRegs.o: tui.h tuiData.h tuiLayout.h tuiWin.h
+tuiSource.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h tuiSource.h
+tuiSourceWin.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h tuiSource.h \
+	tuiDisassem.h
+tuiStack.o: tui.h tuiData.h tuiStack.h tuiSourceWin.h
+tuiWin.o: tui.h tuiData.h tuiGeneralWin.h tuiStack.h tuiSourceWin.h \
+	tuiDataWin.h
+
+tuiInit.o: tuiInit.c
+tuiInit.c: $(SOURCES)
+	@echo Making tuiInit.c
+	@rm -f init.c-tmp
+	@echo '/* Do not modify this file.  */' >init.c-tmp
+	@echo '/* It is created automatically by the Makefile.	*/'>>init.c-tmp
+	@echo '#include "ansidecl.h"' >>init.c-tmp
+	@echo 'extern void initialize_tui_files PARAMS ((void));' >>init.c-tmp
+	@echo 'void initialize_tui_files PARAMS ((void)) {' >>init.c-tmp
+	@-( cd $(srcdir) ; grep '^_initialize_[a-z_0-9A-Z]* *(' $(SOURCES) ) 2>/dev/null \
+	| sed -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/  {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
+	@echo '}' >>init.c-tmp
+	@mv init.c-tmp tuiInit.c
+
+clean:
+	rm -f *.o *.a
diff --git a/gdb/tui/tui.c b/gdb/tui/tui.c
new file mode 100644
index 0000000..f64db44
--- /dev/null
+++ b/gdb/tui/tui.c
@@ -0,0 +1,830 @@
+/*
+** tui.c
+**         General functions for the WDB TUI
+*/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <malloc.h>
+#include <curses.h>
+#ifdef HAVE_TERM_H
+#include <term.h>
+#endif
+#include <signal.h>
+#include <fcntl.h>
+#include <termio.h>
+#include <setjmp.h>
+#include "defs.h"
+#include "gdbcmd.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiLayout.h"
+#include "tuiIO.h"
+#include "tuiRegs.h"
+#include "tuiWin.h"
+
+/* The Solaris header files seem to provide no declaration for this at
+   all when __STDC__ is defined.  This shouldn't conflict with
+   anything.  */
+extern char *tgoto ();
+
+/***********************
+** Local Definitions
+************************/
+#define FILEDES         2
+/* Solaris <sys/termios.h> defines CTRL. */
+#ifndef CTRL
+#define CTRL(x)         (x & ~0140)
+#endif
+#define CHK(val, dft)   (val<=0 ? dft : val)
+
+#define TOGGLE_USAGE "Usage:toggle breakpoints"
+#define TUI_TOGGLE_USAGE "Usage:\ttoggle $fregs\n\ttoggle breakpoints"
+
+/*****************************
+** Local static forward decls
+******************************/
+static void _tuiReset PARAMS ((void));
+static void _toggle_command PARAMS ((char *, int));
+static void _tui_vToggle_command PARAMS ((va_list));
+static Opaque _tui_vDo PARAMS ((TuiOpaqueFuncPtr, va_list));
+
+
+
+/***********************
+** Public Functions
+************************/
+
+/*
+** tuiInit().
+*/
+void
+#ifdef __STDC__
+tuiInit (char *argv0)
+#else
+tuiInit (argv0)
+     char *argv0;
+#endif
+{
+  extern void init_page_info ();
+  extern void initialize_tui_files PARAMS ((void));
+
+  initialize_tui_files ();
+  initializeStaticData ();
+  initscr ();
+  refresh ();
+  setTermHeightTo (LINES);
+  setTermWidthTo (COLS);
+  tuiInitWindows ();
+  wrefresh (cmdWin->generic.handle);
+  init_page_info ();
+  /* Don't hook debugger output if doing command-window
+     * the XDB way. However, one thing we do want to do in
+     * XDB style is set up the scrolling region to be
+     * the bottom of the screen (tuiTermUnsetup()).
+     */
+  fputs_unfiltered_hook = NULL;
+  flush_hook = NULL;
+  rl_initialize ();		/* need readline initialization to
+		      * create termcap sequences
+		      */
+  tuiTermUnsetup (1, cmdWin->detail.commandInfo.curch);
+
+  return;
+}				/* tuiInit */
+
+
+/*
+** tuiInitWindows().
+*/
+void
+#ifdef __STDC__
+tuiInitWindows (void)
+#else
+tuiInitWindows ()
+#endif
+{
+  TuiWinType type;
+
+  tuiSetLocatorContent (0);
+  showLayout (SRC_COMMAND);
+  keypad (cmdWin->generic.handle, TRUE);
+  echo ();
+  crmode ();
+  nl ();
+  tuiSetWinFocusTo (srcWin);
+
+  return;
+}				/* tuiInitWindows */
+
+
+/*
+** tuiCleanUp().
+**        Kill signal handler and cleanup termination method
+*/
+void
+#ifdef __STDC__
+tuiResetScreen (void)
+#else
+tuiResetScreen ()
+#endif
+{
+  TuiWinType type = SRC_WIN;
+
+  keypad (cmdWin->generic.handle, FALSE);
+  for (; type < MAX_MAJOR_WINDOWS; type++)
+    {
+      if (m_winPtrNotNull (winList[type]) &&
+	  winList[type]->generic.type != UNDEFINED_WIN &&
+	  !winList[type]->generic.isVisible)
+	tuiDelWindow (winList[type]);
+    }
+  endwin ();
+  initscr ();
+  refresh ();
+  echo ();
+  crmode ();
+  nl ();
+
+  return;
+}				/* tuiResetScreen */
+
+
+/*
+** tuiCleanUp().
+**        Kill signal handler and cleanup termination method
+*/
+void
+#ifdef __STDC__
+tuiCleanUp (void)
+#else
+tuiCleanUp ()
+#endif
+{
+  char *buffer;
+  extern char *term_cursor_move;
+
+  signal (SIGINT, SIG_IGN);
+  tuiTermSetup (0);		/* Restore scrolling region to whole screen */
+  keypad (cmdWin->generic.handle, FALSE);
+  freeAllWindows ();
+  endwin ();
+  buffer = tgoto (term_cursor_move, 0, termHeight ());
+  tputs (buffer, 1, putchar);
+  _tuiReset ();
+
+  return;
+}				/* tuiCleanUp */
+
+
+/*
+** tuiError().
+*/
+void
+#ifdef __STDC__
+tuiError (
+	   char *string,
+	   int exitGdb)
+#else
+tuiError (string, exitGdb)
+     char *string;
+     int exitGdb;
+#endif
+{
+  puts_unfiltered (string);
+  if (exitGdb)
+    {
+      tuiCleanUp ();
+      exit (-1);
+    }
+
+  return;
+}				/* tuiError */
+
+
+/*
+** tui_vError()
+**        tuiError with args in a va_list.
+*/
+void
+#ifdef __STDC__
+tui_vError (
+	     va_list args)
+#else
+tui_vError (args)
+     va_list args;
+#endif
+{
+  char *string;
+  int exitGdb;
+
+  string = va_arg (args, char *);
+  exitGdb = va_arg (args, int);
+
+  tuiError (string, exitGdb);
+
+  return;
+}				/* tui_vError */
+
+
+/*
+** tuiFree()
+**    Wrapper on top of free() to ensure that input address is greater than 0x0
+*/
+void
+#ifdef __STDC__
+tuiFree (
+	  char *ptr)
+#else
+tuiFree (ptr)
+     char *ptr;
+#endif
+{
+  if (ptr != (char *) NULL)
+    {
+      free (ptr);
+    }
+
+  return;
+}				/* tuiFree */
+
+
+/* tuiGetLowDisassemblyAddress().
+**        Determine what the low address will be to display in the TUI's
+**        disassembly window.  This may or may not be the same as the
+**        low address input.
+*/
+Opaque
+#ifdef __STDC__
+tuiGetLowDisassemblyAddress (
+			      Opaque low,
+			      Opaque pc)
+#else
+tuiGetLowDisassemblyAddress (low, pc)
+     Opaque low;
+     Opaque pc;
+#endif
+{
+  int line;
+  Opaque newLow;
+
+  /*
+    ** Determine where to start the disassembly so that the pc is about in the
+    ** middle of the viewport.
+    */
+  for (line = 0, newLow = pc;
+       (newLow > low &&
+	line < (tuiDefaultWinViewportHeight (DISASSEM_WIN,
+					     DISASSEM_COMMAND) / 2));)
+    {
+      bfd_byte buffer[4];
+
+      newLow -= sizeof (bfd_getb32 (buffer));
+      line++;
+    }
+
+  return newLow;
+}				/* tuiGetLowDisassemblyAddress */
+
+
+/* tui_vGetLowDisassemblyAddress().
+**        Determine what the low address will be to display in the TUI's
+**        disassembly window with args in a va_list.
+*/
+Opaque
+#ifdef __STDC__
+tui_vGetLowDisassemblyAddress (
+				va_list args)
+#else
+tui_vGetLowDisassemblyAddress (args)
+     va_list args;
+#endif
+{
+  int line;
+  Opaque newLow;
+  Opaque low;
+  Opaque pc;
+
+  low = va_arg (args, Opaque);
+  pc = va_arg (args, Opaque);
+
+  return (tuiGetLowDisassemblyAddress (low, pc));
+
+}				/* tui_vGetLowDisassemblyAddress */
+
+
+/*
+** tuiDo().
+**        General purpose function to execute a tui function.  Transitions
+**        between curses and the are handled here.  This function is called
+**        by non-tui gdb functions.
+**
+**        Errors are caught here.
+**        If there is no error, the value returned by 'func' is returned.
+**        If there is an error, then zero is returned.
+**
+**       Must not be called with immediate_quit in effect (bad things might
+**       happen, say we got a signal in the middle of a memcpy to quit_return).
+**       This is an OK restriction; with very few exceptions immediate_quit can
+**       be replaced by judicious use of QUIT.
+*/
+Opaque
+#ifdef __STDC__
+tuiDo (
+	TuiOpaqueFuncPtr func,...)
+#else
+tuiDo (func, va_alist)
+     TuiOpaqueFuncPtr func;
+     va_dcl
+#endif
+{
+  extern int terminal_is_ours;
+
+  Opaque ret = (Opaque) NULL;
+
+  /* It is an error to be tuiDo'ing if we
+     * don't own the terminal.
+     */
+  if (!terminal_is_ours)
+    return ret;
+
+  if (tui_version)
+    {
+      va_list args;
+
+#ifdef __STDC__
+      va_start (args, func);
+#else
+      va_start (args);
+#endif
+      ret = _tui_vDo (func, args);
+      va_end (args);
+    }
+
+  return ret;
+}				/* tuiDo */
+
+
+/*
+** tuiDoAndReturnToTop().
+**        General purpose function to execute a tui function.  Transitions
+**        between curses and the are handled here.  This function is called
+**        by non-tui gdb functions who wish to reset gdb to the top level.
+**        After the tuiDo is performed, a return to the top level occurs.
+**
+**        Errors are caught here.
+**        If there is no error, the value returned by 'func' is returned.
+**        If there is an error, then zero is returned.
+**
+**       Must not be called with immediate_quit in effect (bad things might
+**       happen, say we got a signal in the middle of a memcpy to quit_return).
+**       This is an OK restriction; with very few exceptions immediate_quit can
+**       be replaced by judicious use of QUIT.
+**
+*/
+Opaque
+#ifdef __STDC__
+tuiDoAndReturnToTop (
+		      TuiOpaqueFuncPtr func,...)
+#else
+tuiDoAndReturnToTop (func, va_alist)
+     TuiOpaqueFuncPtr func;
+     va_dcl
+#endif
+{
+  extern int terminal_is_ours;
+
+  Opaque ret = (Opaque) NULL;
+
+  /* It is an error to be tuiDo'ing if we
+     * don't own the terminal.
+     */
+  if (!terminal_is_ours)
+    return ret;
+
+  if (tui_version)
+    {
+      va_list args;
+
+#ifdef __STDC__
+      va_start (args, func);
+#else
+      va_start (args);
+#endif
+      ret = _tui_vDo (func, args);
+
+      /* force a return to the top level */
+      return_to_top_level (RETURN_ERROR);
+    }
+
+  return ret;
+}				/* tuiDoAndReturnToTop */
+
+
+void
+#ifdef __STDC__
+tui_vSelectSourceSymtab (
+			  va_list args)
+#else
+tui_vSelectSourceSymtab (args)
+     va_list args;
+#endif
+{
+  struct symtab *s = va_arg (args, struct symtab *);
+
+  select_source_symtab (s);
+  return;
+}				/* tui_vSelectSourceSymtab */
+
+
+/*
+** _initialize_tui().
+**      Function to initialize gdb commands, for tui window manipulation.
+*/
+void
+_initialize_tui ()
+{
+#if 0
+  if (tui_version)
+    {
+      add_com ("toggle", class_tui, _toggle_command,
+	       "Toggle Terminal UI Features\n\
+Usage: Toggle $fregs\n\
+\tToggles between single and double precision floating point registers.\n");
+    }
+#endif
+  char *helpStr;
+
+  if (tui_version)
+    helpStr = "Toggle Specified Features\n\
+Usage:\ttoggle $fregs\n\ttoggle breakpoints";
+  else
+    helpStr = "Toggle Specified Features\nUsage:toggle breakpoints";
+  add_abbrev_prefix_cmd ("toggle",
+			 class_tui,
+			 _toggle_command,
+			 helpStr,
+			 &togglelist,
+			 "toggle ",
+			 1,
+			 &cmdlist);
+}				/* _initialize_tui*/
+
+
+/*
+** va_catch_errors().
+**       General purpose function to execute a function, catching errors.
+**       If there is no error, the value returned by 'func' is returned.
+**       If there is error, then zero is returned.
+**       Note that 'func' must take a variable argument list as well.
+**
+**       Must not be called with immediate_quit in effect (bad things might
+**       happen, say we got a signal in the middle of a memcpy to quit_return).
+**       This is an OK restriction; with very few exceptions immediate_quit can
+**       be replaced by judicious use of QUIT.
+*/
+Opaque
+#ifdef __STDC__
+va_catch_errors (
+		  TuiOpaqueFuncPtr func,
+		  va_list args)
+#else
+va_catch_errors (func, args)
+     TuiOpaqueFuncPtr func;
+     va_list args;
+#endif
+{
+  Opaque ret = (Opaque) NULL;
+
+  /*
+  ** We could have used catch_errors(), but it doesn't handle variable args.
+  ** Also, for the tui, we always want to catch all errors, so we don't
+  ** need to pass a mask, or an error string.
+  */
+  jmp_buf saved_error;
+  jmp_buf saved_quit;
+  jmp_buf tmp_jmp;
+  struct cleanup *saved_cleanup_chain;
+  char *saved_error_pre_print;
+  char *saved_quit_pre_print;
+  extern jmp_buf error_return;
+  extern jmp_buf quit_return;
+
+  saved_cleanup_chain = save_cleanups ();
+  saved_error_pre_print = error_pre_print;
+  saved_quit_pre_print = quit_pre_print;
+
+  memcpy ((char *) saved_error, (char *) error_return, sizeof (jmp_buf));
+  error_pre_print = "";
+  memcpy (saved_quit, quit_return, sizeof (jmp_buf));
+  quit_pre_print = "";
+
+  if (setjmp (tmp_jmp) == 0)
+    {
+      va_list argList = args;
+      memcpy (error_return, tmp_jmp, sizeof (jmp_buf));
+      memcpy (quit_return, tmp_jmp, sizeof (jmp_buf));
+      ret = func (argList);
+    }
+  restore_cleanups (saved_cleanup_chain);
+  memcpy (error_return, saved_error, sizeof (jmp_buf));
+  error_pre_print = saved_error_pre_print;
+  memcpy (quit_return, saved_quit, sizeof (jmp_buf));
+  quit_pre_print = saved_quit_pre_print;
+
+  return ret;
+}
+
+/*
+** vcatch_errors().
+**        Catch errors occurring in tui or non tui function, handling
+**        variable param lists. Note that 'func' must take a variable
+**        argument list as well.
+*/
+Opaque
+#ifdef __STDC__
+vcatch_errors (
+		OpaqueFuncPtr func,...)
+#else
+vcatch_errors (va_alist)
+     va_dcl
+/*
+vcatch_errors(func, va_alist)
+    OpaqueFuncPtr    func;
+    va_dcl
+*/
+#endif
+{
+  Opaque ret = (Opaque) NULL;
+  va_list args;
+#ifdef __STDC__
+  va_start (args, func);
+/*
+    va_arg(args, OpaqueFuncPtr);
+*/
+#else
+  OpaqueFuncPtr func;
+
+  va_start (args);
+  func = va_arg (args, OpaqueFuncPtr);
+#endif
+  ret = va_catch_errors (func, args);
+  va_end (args);
+
+  return ret;
+}
+
+
+void
+#ifdef __STDC__
+strcat_to_buf (
+		char *buf,
+		int buflen,
+		char *itemToAdd)
+#else
+strcat_to_buf (buf, buflen, itemToAdd)
+     char *buf;
+     int buflen;
+     char *itemToAdd;
+#endif
+{
+  if (itemToAdd != (char *) NULL && buf != (char *) NULL)
+    {
+      if ((strlen (buf) + strlen (itemToAdd)) <= buflen)
+	strcat (buf, itemToAdd);
+      else
+	strncat (buf, itemToAdd, (buflen - strlen (buf)));
+    }
+
+  return;
+}				/* strcat_to_buf */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+strcat_to_buf_with_fmt (
+			 char *buf,
+			 int bufLen,
+			 char *format,...)
+#else
+strcat_to_buf_with_fmt (va_alist)
+     va_dcl
+#endif
+{
+  char *linebuffer;
+  struct cleanup *old_cleanups;
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  char *buf;
+  int bufLen;
+  char *format;
+
+  va_start (args);
+  buf = va_arg (args, char *);
+  bufLen = va_arg (args, int);
+  format = va_arg (args, char *);
+#endif
+  vasprintf (&linebuffer, format, args);
+  old_cleanups = make_cleanup (free, linebuffer);
+  strcat_to_buf (buf, bufLen, linebuffer);
+  do_cleanups (old_cleanups);
+  va_end (args);
+}
+
+
+
+
+
+/***********************
+** Static Functions
+************************/
+
+
+/*
+** _tui_vDo().
+**        General purpose function to execute a tui function.  Transitions
+**        between curses and the are handled here.  This function is called
+**        by non-tui gdb functions.
+**
+**        Errors are caught here.
+**        If there is no error, the value returned by 'func' is returned.
+**        If there is an error, then zero is returned.
+**
+**       Must not be called with immediate_quit in effect (bad things might
+**       happen, say we got a signal in the middle of a memcpy to quit_return).
+**       This is an OK restriction; with very few exceptions immediate_quit can
+**       be replaced by judicious use of QUIT.
+*/
+static Opaque
+#ifdef __STDC__
+_tui_vDo (
+	   TuiOpaqueFuncPtr func,
+	   va_list args)
+#else
+_tui_vDo (func, args)
+     TuiOpaqueFuncPtr func;
+     va_list args;
+#endif
+{
+  extern int terminal_is_ours;
+
+  Opaque ret = (Opaque) NULL;
+
+  /* It is an error to be tuiDo'ing if we
+     * don't own the terminal.
+     */
+  if (!terminal_is_ours)
+    return ret;
+
+  if (tui_version)
+    {
+      /* If doing command window the "XDB way" (command window
+         * is unmanaged by curses...
+         */
+      /* Set up terminal for TUI */
+      tuiTermSetup (1);
+
+      ret = va_catch_errors (func, args);
+
+      /* Set up terminal for command window */
+      tuiTermUnsetup (1, cmdWin->detail.commandInfo.curch);
+    }
+
+  return ret;
+}				/* _tui_vDo */
+
+
+static void
+#ifdef __STDC__
+_toggle_command (
+		  char *arg,
+		  int fromTTY)
+#else
+_toggle_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  printf_filtered ("Specify feature to toggle.\n%s\n",
+		   (tui_version) ? TUI_TOGGLE_USAGE : TOGGLE_USAGE);
+/*
+  tuiDo((TuiOpaqueFuncPtr)_Toggle_command, arg, fromTTY);
+*/
+}
+
+/*
+** _tui_vToggle_command().
+*/
+static void
+#ifdef __STDC__
+_tui_vToggle_command (
+		       va_list args)
+#else
+_tui_vToggle_command (args)
+     va_list args;
+#endif
+{
+  char *arg;
+  int fromTTY;
+
+  arg = va_arg (args, char *);
+
+  if (arg == (char *) NULL)
+    printf_filtered (TOGGLE_USAGE);
+  else
+    {
+      char *ptr = (char *) tuiStrDup (arg);
+      int i;
+
+      for (i = 0; (ptr[i]); i++)
+	ptr[i] = toupper (arg[i]);
+
+      if (subsetCompare (ptr, TUI_FLOAT_REGS_NAME))
+	tuiToggleFloatRegs ();
+/*        else if (subsetCompare(ptr, "ANOTHER TOGGLE OPTION"))
+            ...
+*/
+      else
+	printf_filtered (TOGGLE_USAGE);
+      tuiFree (ptr);
+    }
+
+  return;
+}				/* _tuiToggle_command */
+
+
+static void
+#ifdef __STDC__
+_tuiReset (void)
+#else
+_tuiReset ()
+#endif
+{
+  struct termio mode;
+
+  /*
+    ** reset the teletype mode bits to a sensible state.
+    ** Copied tset.c
+    */
+#if ! defined (USG) && defined (TIOCGETC)
+  struct tchars tbuf;
+#endif /* !USG && TIOCGETC */
+#ifdef UCB_NTTY
+  struct ltchars ltc;
+
+  if (ldisc == NTTYDISC)
+    {
+      ioctl (FILEDES, TIOCGLTC, &ltc);
+      ltc.t_suspc = CHK (ltc.t_suspc, CTRL ('Z'));
+      ltc.t_dsuspc = CHK (ltc.t_dsuspc, CTRL ('Y'));
+      ltc.t_rprntc = CHK (ltc.t_rprntc, CTRL ('R'));
+      ltc.t_flushc = CHK (ltc.t_flushc, CTRL ('O'));
+      ltc.t_werasc = CHK (ltc.t_werasc, CTRL ('W'));
+      ltc.t_lnextc = CHK (ltc.t_lnextc, CTRL ('V'));
+      ioctl (FILEDES, TIOCSLTC, &ltc);
+    }
+#endif /* UCB_NTTY */
+#ifndef USG
+#ifdef TIOCGETC
+  ioctl (FILEDES, TIOCGETC, &tbuf);
+  tbuf.t_intrc = CHK (tbuf.t_intrc, CTRL ('?'));
+  tbuf.t_quitc = CHK (tbuf.t_quitc, CTRL ('\\'));
+  tbuf.t_startc = CHK (tbuf.t_startc, CTRL ('Q'));
+  tbuf.t_stopc = CHK (tbuf.t_stopc, CTRL ('S'));
+  tbuf.t_eofc = CHK (tbuf.t_eofc, CTRL ('D'));
+  /* brkc is left alone */
+  ioctl (FILEDES, TIOCSETC, &tbuf);
+#endif /* TIOCGETC */
+  mode.sg_flags &= ~(RAW
+#ifdef CBREAK
+		     | CBREAK
+#endif /* CBREAK */
+		     | VTDELAY | ALLDELAY);
+  mode.sg_flags |= XTABS | ECHO | CRMOD | ANYP;
+#else /*USG*/
+  ioctl (FILEDES, TCGETA, &mode);
+  mode.c_cc[VINTR] = CHK (mode.c_cc[VINTR], CTRL ('?'));
+  mode.c_cc[VQUIT] = CHK (mode.c_cc[VQUIT], CTRL ('\\'));
+  mode.c_cc[VEOF] = CHK (mode.c_cc[VEOF], CTRL ('D'));
+
+  mode.c_iflag &= ~(IGNBRK | PARMRK | INPCK | INLCR | IGNCR | IUCLC | IXOFF);
+  mode.c_iflag |= (BRKINT | ISTRIP | ICRNL | IXON);
+  mode.c_oflag &= ~(OLCUC | OCRNL | ONOCR | ONLRET | OFILL | OFDEL |
+		    NLDLY | CRDLY | TABDLY | BSDLY | VTDLY | FFDLY);
+  mode.c_oflag |= (OPOST | ONLCR);
+  mode.c_cflag &= ~(CSIZE | PARODD | CLOCAL);
+#ifndef hp9000s800
+  mode.c_cflag |= (CS8 | CREAD);
+#else /*hp9000s800*/
+  mode.c_cflag |= (CS8 | CSTOPB | CREAD);
+#endif /* hp9000s800 */
+  mode.c_lflag &= ~(XCASE | ECHONL | NOFLSH);
+  mode.c_lflag |= (ISIG | ICANON | ECHO | ECHOK);
+  ioctl (FILEDES, TCSETAW, &mode);
+#endif /* USG */
+
+  return;
+}				/* _tuiReset */
diff --git a/gdb/tui/tui.h b/gdb/tui/tui.h
new file mode 100644
index 0000000..bc9fb31
--- /dev/null
+++ b/gdb/tui/tui.h
@@ -0,0 +1,120 @@
+/* External/Public TUI Header File */
+
+#ifndef TUI_H
+#define TUI_H
+#include <curses.h>
+
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+#include "ansidecl.h"
+
+#if defined(reg)
+#undef reg
+#endif
+#if defined(chtype)
+#undef chtype
+#endif
+
+/* Opaque data type */
+typedef char *Opaque;
+typedef Opaque (*OpaqueFuncPtr) PARAMS ((va_list));
+typedef char **OpaqueList;
+typedef OpaqueList OpaquePtr;
+
+/* Generic function pointer */
+typedef     void              (*TuiVoidFuncPtr) PARAMS ((va_list));
+typedef     int               (*TuiIntFuncPtr) PARAMS ((va_list));
+/*
+typedef     Opaque            (*TuiOpaqueFuncPtr) PARAMS ((va_list));
+*/
+typedef     OpaqueFuncPtr     TuiOpaqueFuncPtr;
+
+extern Opaque vcatch_errors PARAMS ((OpaqueFuncPtr, ...));
+extern Opaque va_catch_errors PARAMS ((OpaqueFuncPtr, va_list));
+
+extern void strcat_to_buf PARAMS ((char *, int, char *));
+extern void strcat_to_buf_with_fmt PARAMS ((char *, int, char *, ...));
+
+/* Types of error returns */
+typedef enum {
+    TUI_SUCCESS,
+    TUI_FAILURE
+} TuiStatus, *TuiStatusPtr;
+
+/* Types of windows */
+typedef enum {
+    SRC_WIN = 0,
+    DISASSEM_WIN,
+    DATA_WIN,
+    CMD_WIN,
+    /* This must ALWAYS be AFTER the major windows last */
+    MAX_MAJOR_WINDOWS,
+    /* auxillary windows */
+    LOCATOR_WIN,
+    EXEC_INFO_WIN,
+    DATA_ITEM_WIN,
+    /* This must ALWAYS be next to last */
+    MAX_WINDOWS,
+    UNDEFINED_WIN /* LAST */
+} TuiWinType, *TuiWinTypePtr;
+
+/* This is a point definition */
+typedef struct _TuiPoint {
+    int x, y;
+} TuiPoint, *TuiPointPtr;
+
+/* Generic window information */
+typedef struct _TuiGenWinInfo {
+    WINDOW          *handle; /* window handle */
+    TuiWinType      type; /* type of window */
+    int             width; /* window width */
+    int             height; /* window height */
+    TuiPoint        origin; /* origin of window */
+    OpaquePtr       content; /* content of window */
+    int             contentSize; /* Size of content (# of elements) */
+    int             contentInUse; /* Can it be used, or is it already used? */
+    int             viewportHeight; /* viewport height */
+    int             lastVisibleLine; /* index of last visible line */
+    int             isVisible; /* whether the window is visible or not */
+} TuiGenWinInfo, *TuiGenWinInfoPtr;
+
+/* GENERAL TUI FUNCTIONS */
+/* tui.c */
+extern void          tuiInit PARAMS ((char *argv0));
+extern void          tuiInitWindows PARAMS ((void));
+extern void          tuiResetScreen PARAMS ((void));
+extern void          tuiCleanUp PARAMS ((void));
+extern void          tuiError PARAMS ((char *, int));
+extern void          tui_vError PARAMS ((va_list));
+extern void          tuiFree PARAMS ((char *));
+extern Opaque        tuiDo PARAMS ((TuiOpaqueFuncPtr, ...));
+extern Opaque        tuiDoAndReturnToTop PARAMS ((TuiOpaqueFuncPtr, ...));
+extern Opaque        tuiGetLowDisassemblyAddress PARAMS ((Opaque, Opaque));
+extern Opaque        tui_vGetLowDisassemblyAddress PARAMS ((va_list));
+extern void          tui_vSelectSourceSymtab PARAMS ((va_list));
+
+/* tuiDataWin.c */
+extern void		tui_vCheckDataValues PARAMS ((va_list));
+
+/* tuiIO.c */
+extern void		tui_vStartNewLines PARAMS ((va_list));
+
+/* tuiLayout.c */
+extern void		tui_vAddWinToLayout PARAMS ((va_list));
+extern TuiStatus	tui_vSetLayoutTo PARAMS ((va_list));
+
+/* tuiSourceWin.c */
+extern void		tuiDisplayMainFunction PARAMS ((void));
+extern void		tuiUpdateAllExecInfos PARAMS ((void));
+extern void		tuiUpdateOnEnd PARAMS ((void));
+extern void		tui_vAllSetHasBreakAt PARAMS ((va_list));
+extern void		tui_vUpdateSourceWindowsWithAddr PARAMS ((va_list));
+
+/* tuiStack.c */
+extern void		tui_vShowFrameInfo PARAMS ((va_list));
+extern void		tui_vUpdateLocatorFilename PARAMS ((va_list));
+#endif /* TUI_H */
diff --git a/gdb/tui/tuiCommand.c b/gdb/tui/tuiCommand.c
new file mode 100644
index 0000000..454dc62
--- /dev/null
+++ b/gdb/tui/tuiCommand.c
@@ -0,0 +1,215 @@
+/*
+** tuiCommand.c
+**     This module contains functions specific to command window processing.
+*/
+
+
+#include "defs.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiWin.h"
+#include "tuiIO.h"
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                        **
+******************************************/
+
+/*
+** tuiDispatchCtrlChar().
+**        Dispatch the correct tui function based upon the control character.
+*/
+unsigned int
+#ifdef __STDC__
+tuiDispatchCtrlChar (
+		      unsigned int ch)
+#else
+tuiDispatchCtrlChar (ch)
+     unsigned int ch;
+#endif
+{
+  TuiWinInfoPtr winInfo = tuiWinWithFocus ();
+
+  /*
+    ** If the command window has the logical focus, or no-one does
+    ** assume it is the command window; in this case, pass the
+    ** character on through and do nothing here.
+    */
+  if (winInfo == (TuiWinInfoPtr) NULL || winInfo == cmdWin)
+    return ch;
+  else
+    {
+      unsigned int c = 0, chCopy = ch;
+      register int i;
+      char *term;
+
+      /* If this is an xterm, page next/prev keys aren't returned
+        ** by keypad as a single char, so we must handle them here.
+        ** Seems like a bug in the curses library?
+        */
+      term = (char *) getenv ("TERM");
+      for (i = 0; (term && term[i]); i++)
+	term[i] = toupper (term[i]);
+      if ((strcmp (term, "XTERM") == 0) && m_isStartSequence (ch))
+	{
+	  unsigned int pageCh = 0, tmpChar;
+
+	  tmpChar = 0;
+	  while (!m_isEndSequence (tmpChar))
+	    {
+	      tmpChar = (int) wgetch (cmdWin->generic.handle);
+	      if (!tmpChar)
+		break;
+	      if (tmpChar == 53)
+		pageCh = KEY_PPAGE;
+	      else if (tmpChar == 54)
+		pageCh = KEY_NPAGE;
+	    }
+	  chCopy = pageCh;
+	}
+
+      switch (chCopy)
+	{
+	case KEY_NPAGE:
+	  tuiScrollForward (winInfo, 0);
+	  break;
+	case KEY_PPAGE:
+	  tuiScrollBackward (winInfo, 0);
+	  break;
+	case KEY_DOWN:
+	case KEY_SF:
+	  tuiScrollForward (winInfo, 1);
+	  break;
+	case KEY_UP:
+	case KEY_SR:
+	  tuiScrollBackward (winInfo, 1);
+	  break;
+	case KEY_RIGHT:
+	  tuiScrollLeft (winInfo, 1);
+	  break;
+	case KEY_LEFT:
+	  tuiScrollRight (winInfo, 1);
+	  break;
+	case '\f':
+	  tuiRefreshAll ();
+	  break;
+	default:
+	  c = chCopy;
+	  break;
+	}
+      return c;
+    }
+}				/* tuiDispatchCtrlChar */
+
+
+/*
+** tuiIncrCommandCharCountBy()
+**     Increment the current character count in the command window,
+**     checking for overflow.  Returns the new value of the char count.
+*/
+int
+#ifdef __STDC__
+tuiIncrCommandCharCountBy (
+			    int count)
+#else
+tuiIncrCommandCharCountBy (count)
+     int count;
+#endif
+{
+  if (tui_version)
+    {
+      if ((count + cmdWin->detail.commandInfo.curch) >= cmdWin->generic.width)
+	cmdWin->detail.commandInfo.curch =
+	  (count + cmdWin->detail.commandInfo.curch) - cmdWin->generic.width;
+      else
+	cmdWin->detail.commandInfo.curch += count;
+    }
+
+  return cmdWin->detail.commandInfo.curch;
+}				/* tuiIncrCommandCharCountBy */
+
+
+/*
+** tuiDecrCommandCharCountBy()
+**     Decrement the current character count in the command window,
+**     checking for overflow.  Returns the new value of the char count.
+*/
+int
+#ifdef __STDC__
+tuiDecrCommandCharCountBy (
+			    int count)
+#else
+tuiDecrCommandCharCountBy (count)
+     int count;
+#endif
+{
+  if (tui_version)
+    {
+      if ((cmdWin->detail.commandInfo.curch - count) < 0)
+	cmdWin->detail.commandInfo.curch =
+	  cmdWin->generic.width + (cmdWin->detail.commandInfo.curch - count);
+      else
+	cmdWin->detail.commandInfo.curch -= count;
+    }
+
+  return cmdWin->detail.commandInfo.curch;
+}				/* tuiDecrCommandCharCountBy */
+
+
+/*
+** tuiSetCommandCharCountTo()
+**     Set the character count to count.
+*/
+int
+#ifdef __STDC__
+tuiSetCommandCharCountTo (
+			   int count)
+#else
+tuiSetCommandCharCountTo (count)
+     int count;
+#endif
+{
+  if (tui_version)
+    {
+      if (count > cmdWin->generic.width - 1)
+	{
+	  cmdWin->detail.commandInfo.curch = 0;
+	  tuiIncrCommandCharCountBy (count);
+	}
+      else
+	cmdWin->detail.commandInfo.curch -= count;
+    }
+
+  return cmdWin->detail.commandInfo.curch;
+}				/* tuiSetCommandCharCountTo */
+
+
+
+/*
+** tuiClearCommandCharCount()
+**     Clear the character count to count.
+*/
+int
+#ifdef __STDC__
+tuiClearCommandCharCount (void)
+#else
+tuiClearCommandCharCount ()
+#endif
+{
+  if (tui_version)
+    cmdWin->detail.commandInfo.curch = 0;
+
+  return cmdWin->detail.commandInfo.curch;
+}				/* tuiClearCommandCharCount */
+
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS                 **
+******************************************/
diff --git a/gdb/tui/tuiCommand.h b/gdb/tui/tuiCommand.h
new file mode 100644
index 0000000..206d918
--- /dev/null
+++ b/gdb/tui/tuiCommand.h
@@ -0,0 +1,24 @@
+#ifndef _TUI_COMMAND_H
+#define _TUI_COMMAND_H
+/*
+** This header file supports
+*/
+
+
+/*****************************************
+** TYPE DEFINITIONS                        **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTION EXTERNAL DECLS        **
+******************************************/
+
+extern unsigned int     tuiDispatchCtrlChar PARAMS ((unsigned int));
+extern int              tuiIncrCommandCharCountBy PARAMS ((int));
+extern int              tuiDecrCommandCharCountBy PARAMS ((int));
+extern int              tuiSetCommandCharCountTo PARAMS ((int));
+extern int              tuiClearCommandCharCount PARAMS ((void));
+
+#endif /*_TUI_COMMAND_H*/
diff --git a/gdb/tui/tuiData.c b/gdb/tui/tuiData.c
new file mode 100644
index 0000000..758a6cd
--- /dev/null
+++ b/gdb/tui/tuiData.c
@@ -0,0 +1,1624 @@
+/*
+** tuiData.c
+**    This module contains functions for manipulating the data
+**    structures used by the TUI
+*/
+
+#include "defs.h"
+#include "tui.h"
+#include "tuiData.h"
+
+/****************************
+** GLOBAL DECLARATIONS
+****************************/
+TuiWinInfoPtr winList[MAX_MAJOR_WINDOWS];
+
+/***************************
+** Private Definitions
+****************************/
+#define FILE_WIDTH   30
+#define PROC_WIDTH   40
+#define LINE_WIDTH   4
+#define PC_WIDTH     8
+
+/***************************
+** Private data
+****************************/
+static char *_tuiNullStr = TUI_NULL_STR;
+static char *_tuiBlankStr = "   ";
+static char *_tuiLocationStr = "  >";
+static char *_tuiBreakStr = " * ";
+static char *_tuiBreakLocationStr = " *>";
+static TuiLayoutType _currentLayout = UNDEFINED_LAYOUT;
+static int _termHeight, _termWidth;
+static int _historyLimit = DEFAULT_HISTORY_COUNT;
+static TuiGenWinInfo _locator;
+static TuiGenWinInfo _execInfo[2];
+static TuiWinInfoPtr _srcWinList[2];
+static TuiList _sourceWindows =
+{(OpaqueList) _srcWinList, 0};
+static int _defaultTabLen = DEFAULT_TAB_LEN;
+static TuiWinInfoPtr _winWithFocus = (TuiWinInfoPtr) NULL;
+static TuiLayoutDef _layoutDef =
+{SRC_WIN,			/* displayMode */
+ FALSE,				/* split */
+ TUI_UNDEFINED_REGS,		/* regsDisplayType */
+ TUI_SFLOAT_REGS};		/* floatRegsDisplayType */
+static int _winResized = FALSE;
+
+
+/*********************************
+** Static function forward decls
+**********************************/
+static void freeContent PARAMS ((TuiWinContent, int, TuiWinType));
+static void freeContentElements PARAMS ((TuiWinContent, int, TuiWinType));
+
+
+
+/*********************************
+** PUBLIC FUNCTIONS
+**********************************/
+
+/******************************************
+** ACCESSORS & MUTATORS FOR PRIVATE DATA
+******************************************/
+
+/*
+** tuiWinResized().
+**        Answer a whether the terminal window has been resized or not
+*/
+int
+#ifdef __STDC__
+tuiWinResized (void)
+#else
+tuiWinResized ()
+#endif
+{
+  return _winResized;
+}				/* tuiWinResized */
+
+
+/*
+** tuiSetWinResized().
+**        Set a whether the terminal window has been resized or not
+*/
+void
+#ifdef __STDC__
+tuiSetWinResizedTo (
+		     int resized)
+#else
+tuiSetWinResizedTo (resized)
+     int resized;
+#endif
+{
+  _winResized = resized;
+
+  return;
+}				/* tuiSetWinResizedTo */
+
+
+/*
+** tuiLayoutDef().
+**        Answer a pointer to the current layout definition
+*/
+TuiLayoutDefPtr
+#ifdef __STDC__
+tuiLayoutDef (void)
+#else
+tuiLayoutDef ()
+#endif
+{
+  return &_layoutDef;
+}				/* tuiLayoutDef */
+
+
+/*
+** tuiWinWithFocus().
+**        Answer the window with the logical focus
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+tuiWinWithFocus (void)
+#else
+tuiWinWithFocus ()
+#endif
+{
+  return _winWithFocus;
+}				/* tuiWinWithFocus */
+
+
+/*
+** tuiSetWinWithFocus().
+**        Set the window that has the logical focus
+*/
+void
+#ifdef __STDC__
+tuiSetWinWithFocus (
+		     TuiWinInfoPtr winInfo)
+#else
+tuiSetWinWithFocus (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  _winWithFocus = winInfo;
+
+  return;
+}				/* tuiSetWinWithFocus */
+
+
+/*
+** tuiDefaultTabLen().
+**        Answer the length in chars, of tabs
+*/
+int
+#ifdef __STDC__
+tuiDefaultTabLen (void)
+#else
+tuiDefaultTabLen ()
+#endif
+{
+  return _defaultTabLen;
+}				/* tuiDefaultTabLen */
+
+
+/*
+** tuiSetDefaultTabLen().
+**        Set the length in chars, of tabs
+*/
+void
+#ifdef __STDC__
+tuiSetDefaultTabLen (
+		      int len)
+#else
+tuiSetDefaultTabLen (len)
+     int len;
+#endif
+{
+  _defaultTabLen = len;
+
+  return;
+}				/* tuiSetDefaultTabLen */
+
+
+/*
+** currentSourceWin()
+**        Accessor for the current source window.  Usually there is only
+**        one source window (either source or disassembly), but both can
+**        be displayed at the same time.
+*/
+TuiListPtr
+#ifdef __STDC__
+sourceWindows (void)
+#else
+sourceWindows ()
+#endif
+{
+  return &_sourceWindows;
+}				/* currentSourceWindows */
+
+
+/*
+** clearSourceWindows()
+**        Clear the list of source windows.  Usually there is only one
+**        source window (either source or disassembly), but both can be
+**        displayed at the same time.
+*/
+void
+#ifdef __STDC__
+clearSourceWindows (void)
+#else
+clearSourceWindows ()
+#endif
+{
+  _sourceWindows.list[0] = (Opaque) NULL;
+  _sourceWindows.list[1] = (Opaque) NULL;
+  _sourceWindows.count = 0;
+
+  return;
+}				/* currentSourceWindows */
+
+
+/*
+** clearSourceWindowsDetail()
+**        Clear the pertinant detail in the source windows.
+*/
+void
+#ifdef __STDC__
+clearSourceWindowsDetail (void)
+#else
+clearSourceWindowsDetail ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    clearWinDetail ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* currentSourceWindows */
+
+
+/*
+** addSourceWindowToList().
+**       Add a window to the list of source windows.  Usually there is
+**       only one source window (either source or disassembly), but
+**       both can be displayed at the same time.
+*/
+void
+#ifdef __STDC__
+addToSourceWindows (
+		     TuiWinInfoPtr winInfo)
+#else
+addToSourceWindows (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (_sourceWindows.count < 2)
+    _sourceWindows.list[_sourceWindows.count++] = (Opaque) winInfo;
+
+  return;
+}				/* addToSourceWindows */
+
+
+/*
+** clearWinDetail()
+**        Clear the pertinant detail in the windows.
+*/
+void
+#ifdef __STDC__
+clearWinDetail (
+		 TuiWinInfoPtr winInfo)
+#else
+clearWinDetail (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo))
+    {
+      switch (winInfo->generic.type)
+	{
+	case SRC_WIN:
+	case DISASSEM_WIN:
+	  winInfo->detail.sourceInfo.startLineOrAddr.addr = (Opaque) NULL;
+	  winInfo->detail.sourceInfo.horizontalOffset = 0;
+	  break;
+	case CMD_WIN:
+	  winInfo->detail.commandInfo.curLine =
+	    winInfo->detail.commandInfo.curch = 0;
+	  break;
+	case DATA_WIN:
+	  winInfo->detail.dataDisplayInfo.dataContent =
+	    (TuiWinContent) NULL;
+	  winInfo->detail.dataDisplayInfo.dataContentCount = 0;
+	  winInfo->detail.dataDisplayInfo.regsContent =
+	    (TuiWinContent) NULL;
+	  winInfo->detail.dataDisplayInfo.regsContentCount = 0;
+	  winInfo->detail.dataDisplayInfo.regsDisplayType =
+	    TUI_UNDEFINED_REGS;
+	  winInfo->detail.dataDisplayInfo.regsColumnCount = 1;
+	  winInfo->detail.dataDisplayInfo.displayRegs = FALSE;
+	  break;
+	default:
+	  break;
+	}
+    }
+
+  return;
+}				/* clearWinDetail */
+
+
+/*
+** blankStr()
+**        Accessor for the blank string.
+*/
+char *
+#ifdef __STDC__
+blankStr (void)
+#else
+blankStr ()
+#endif
+{
+  return _tuiBlankStr;
+}				/* blankStr */
+
+
+/*
+** locationStr()
+**        Accessor for the location string.
+*/
+char *
+#ifdef __STDC__
+locationStr (void)
+#else
+locationStr ()
+#endif
+{
+  return _tuiLocationStr;
+}				/* locationStr */
+
+
+/*
+** breakStr()
+**        Accessor for the break string.
+*/
+char *
+#ifdef __STDC__
+breakStr (void)
+#else
+breakStr ()
+#endif
+{
+  return _tuiBreakStr;
+}				/* breakStr */
+
+
+/*
+** breakLocationStr()
+**        Accessor for the breakLocation string.
+*/
+char *
+#ifdef __STDC__
+breakLocationStr (void)
+#else
+breakLocationStr ()
+#endif
+{
+  return _tuiBreakLocationStr;
+}				/* breakLocationStr */
+
+
+/*
+** nullStr()
+**        Accessor for the null string.
+*/
+char *
+#ifdef __STDC__
+nullStr (void)
+#else
+nullStr ()
+#endif
+{
+  return _tuiNullStr;
+}				/* nullStr */
+
+
+/*
+** sourceExecInfoPtr().
+**        Accessor for the source execution info ptr.
+*/
+TuiGenWinInfoPtr
+#ifdef __STDC__
+sourceExecInfoWinPtr (void)
+#else
+sourceExecInfoWinPtr ()
+#endif
+{
+  return &_execInfo[0];
+}				/* sourceExecInfoWinPtr */
+
+
+/*
+** disassemExecInfoPtr().
+**        Accessor for the disassem execution info ptr.
+*/
+TuiGenWinInfoPtr
+#ifdef __STDC__
+disassemExecInfoWinPtr (void)
+#else
+disassemExecInfoWinPtr ()
+#endif
+{
+  return &_execInfo[1];
+}				/* disassemExecInfoWinPtr */
+
+
+/*
+** locatorWinInfoPtr().
+**        Accessor for the locator win info.  Answers a pointer to the
+**        static locator win info struct.
+*/
+TuiGenWinInfoPtr
+#ifdef __STDC__
+locatorWinInfoPtr (void)
+#else
+locatorWinInfoPtr ()
+#endif
+{
+  return &_locator;
+}				/* locatorWinInfoPtr */
+
+
+/*
+** historyLimit().
+**        Accessor for the history limit
+*/
+int
+#ifdef __STDC__
+historyLimit (void)
+#else
+historyLimit ()
+#endif
+{
+  return _historyLimit;
+}				/* historyLimit */
+
+
+/*
+** setHistoryLimitTo().
+**        Mutator for the history limit
+*/
+void
+#ifdef __STDC__
+setHistoryLimitTo (
+		    int h)
+#else
+setHistoryLimitTo (h)
+     int h;
+#endif
+{
+  _historyLimit = h;
+
+  return;
+}				/* setHistoryLimitTo */
+
+/*
+** termHeight().
+**        Accessor for the termHeight
+*/
+int
+#ifdef __STDC__
+termHeight (void)
+#else
+termHeight ()
+#endif
+{
+  return _termHeight;
+}				/* termHeight */
+
+
+/*
+** setTermHeightTo().
+**        Mutator for the term height
+*/
+void
+#ifdef __STDC__
+setTermHeightTo (
+		  int h)
+#else
+setTermHeightTo (h)
+     int h;
+#endif
+{
+  _termHeight = h;
+
+  return;
+}				/* setTermHeightTo */
+
+
+/*
+** termWidth().
+**        Accessor for the termWidth
+*/
+int
+#ifdef __STDC__
+termWidth (void)
+#else
+termWidth ()
+#endif
+{
+  return _termWidth;
+}				/* termWidth */
+
+
+/*
+** setTermWidth().
+**        Mutator for the termWidth
+*/
+void
+#ifdef __STDC__
+setTermWidthTo (
+		 int w)
+#else
+setTermWidthTo (w)
+     int w;
+#endif
+{
+  _termWidth = w;
+
+  return;
+}				/* setTermWidthTo */
+
+
+/*
+** currentLayout().
+**        Accessor for the current layout
+*/
+TuiLayoutType
+#ifdef __STDC__
+currentLayout (void)
+#else
+currentLayout ()
+#endif
+{
+  return _currentLayout;
+}				/* currentLayout */
+
+
+/*
+** setCurrentLayoutTo().
+**        Mutator for the current layout
+*/
+void
+#ifdef __STDC__
+setCurrentLayoutTo (
+		     TuiLayoutType newLayout)
+#else
+setCurrentLayoutTo (newLayout)
+     TuiLayoutType newLayout;
+#endif
+{
+  _currentLayout = newLayout;
+
+  return;
+}				/* setCurrentLayoutTo */
+
+
+/*
+** setGenWinOrigin().
+**        Set the origin of the window
+*/
+void
+#ifdef __STDC__
+setGenWinOrigin (
+		  TuiGenWinInfoPtr winInfo,
+		  int x,
+		  int y)
+#else
+setGenWinOrigin (winInfo, x, y)
+     TuiGenWinInfoPtr winInfo;
+     int x;
+     int y;
+#endif
+{
+  winInfo->origin.x = x;
+  winInfo->origin.y = y;
+
+  return;
+}				/* setGenWinOrigin */
+
+
+/*****************************
+** OTHER PUBLIC FUNCTIONS
+*****************************/
+
+
+/*
+** tuiNextWin().
+**        Answer the next window in the list, cycling back to the top
+**        if necessary
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+tuiNextWin (
+	     TuiWinInfoPtr curWin)
+#else
+tuiNextWin (curWin)
+     TuiWinInfoPtr curWin;
+#endif
+{
+  TuiWinType type = curWin->generic.type;
+  TuiWinInfoPtr nextWin = (TuiWinInfoPtr) NULL;
+
+  if (curWin->generic.type == CMD_WIN)
+    type = SRC_WIN;
+  else
+    type = curWin->generic.type + 1;
+  while (type != curWin->generic.type && m_winPtrIsNull (nextWin))
+    {
+      if (winList[type]->generic.isVisible)
+	nextWin = winList[type];
+      else
+	{
+	  if (type == CMD_WIN)
+	    type = SRC_WIN;
+	  else
+	    type++;
+	}
+    }
+
+  return nextWin;
+}				/* tuiNextWin */
+
+
+/*
+** tuiPrevWin().
+**        Answer the prev window in the list, cycling back to the bottom
+**        if necessary
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+tuiPrevWin (
+	     TuiWinInfoPtr curWin)
+#else
+tuiPrevWin (curWin)
+     TuiWinInfoPtr curWin;
+#endif
+{
+  TuiWinType type = curWin->generic.type;
+  TuiWinInfoPtr prev = (TuiWinInfoPtr) NULL;
+
+  if (curWin->generic.type == SRC_WIN)
+    type = CMD_WIN;
+  else
+    type = curWin->generic.type - 1;
+  while (type != curWin->generic.type && m_winPtrIsNull (prev))
+    {
+      if (winList[type]->generic.isVisible)
+	prev = winList[type];
+      else
+	{
+	  if (type == SRC_WIN)
+	    type = CMD_WIN;
+	  else
+	    type--;
+	}
+    }
+
+  return prev;
+}				/* tuiPrevWin */
+
+
+/*
+** displayableWinContentOf().
+**        Answer a the content at the location indicated by index.  Note
+**        that if this is a locator window, the string returned should be
+**        freed after use.
+*/
+char *
+#ifdef __STDC__
+displayableWinContentOf (
+			  TuiGenWinInfoPtr winInfo,
+			  TuiWinElementPtr elementPtr)
+#else
+displayableWinContentOf (winInfo, elementPtr)
+     TuiGenWinInfoPtr winInfo;
+     TuiWinElementPtr elementPtr;
+#endif
+{
+
+  char *string = nullStr ();
+
+  if (elementPtr != (TuiWinElementPtr) NULL || winInfo->type == LOCATOR_WIN)
+    {
+      /*
+        ** Now convert the line to a displayable string
+        */
+      switch (winInfo->type)
+	{
+	case SRC_WIN:
+	case DISASSEM_WIN:
+	  string = elementPtr->whichElement.source.line;
+	  break;
+	case CMD_WIN:
+	  string = elementPtr->whichElement.command.line;
+	  break;
+	case LOCATOR_WIN:
+	  if ((string = (char *) xmalloc (
+		      (termWidth () + 1) * sizeof (char))) == (char *) NULL)
+	      string = nullStr ();
+	  else
+	    {
+	      char lineNo[50], pc[50], buf[50], *fname, *pname;
+	      register int strSize = termWidth (), i, procWidth, fileWidth;
+
+	      /*
+                    ** First determine the amount of file/proc name width
+                    ** we have available
+                    */
+	      i = strSize - (PC_WIDTH + LINE_WIDTH
+			     + 25	/* pc and line labels */
+			     + strlen (FILE_PREFIX) + 1	/* file label */
+			     + 15 /* procedure label */ );
+	      if (i >= FILE_WIDTH + PROC_WIDTH)
+		{
+		  fileWidth = FILE_WIDTH;
+		  procWidth = PROC_WIDTH;
+		}
+	      else
+		{
+		  fileWidth = i / 2;
+		  procWidth = i - fileWidth;
+		}
+
+	      /* Now convert elements to string form */
+	      if (elementPtr != (TuiWinElementPtr) NULL &&
+		  *elementPtr->whichElement.locator.fileName != (char) 0 &&
+		  srcWin->generic.isVisible)
+		fname = elementPtr->whichElement.locator.fileName;
+	      else
+		fname = "??";
+	      if (elementPtr != (TuiWinElementPtr) NULL &&
+		  *elementPtr->whichElement.locator.procName != (char) 0)
+		pname = elementPtr->whichElement.locator.procName;
+	      else
+		pname = "??";
+	      if (elementPtr != (TuiWinElementPtr) NULL &&
+		  elementPtr->whichElement.locator.lineNo > 0)
+		sprintf (lineNo, "%d",
+			 elementPtr->whichElement.locator.lineNo);
+	      else
+		strcpy (lineNo, "??");
+	      if (elementPtr != (TuiWinElementPtr) NULL &&
+		  elementPtr->whichElement.locator.addr > (Opaque) 0)
+		sprintf (pc, "0x%x",
+			 elementPtr->whichElement.locator.addr);
+	      else
+		strcpy (pc, "??");
+	      /*
+                    ** Now create the locator line from the string version
+                    ** of the elements.  We could use sprintf() here but
+                    ** that wouldn't ensure that we don't overrun the size
+                    ** of the allocated buffer.  strcat_to_buf() will.
+                    */
+	      *string = (char) 0;
+	      /* Filename */
+	      strcat_to_buf (string, strSize, " ");
+	      strcat_to_buf (string, strSize, FILE_PREFIX);
+	      if (strlen (fname) > fileWidth)
+		{
+		  strncpy (buf, fname, fileWidth - 1);
+		  buf[fileWidth - 1] = '*';
+		  buf[fileWidth] = (char) 0;
+		}
+	      else
+		strcpy (buf, fname);
+	      strcat_to_buf (string, strSize, buf);
+	      /* procedure/class name */
+	      sprintf (buf, "%15s", PROC_PREFIX);
+	      strcat_to_buf (string, strSize, buf);
+	      if (strlen (pname) > procWidth)
+		{
+		  strncpy (buf, pname, procWidth - 1);
+		  buf[procWidth - 1] = '*';
+		  buf[procWidth] = (char) 0;
+		}
+	      else
+		strcpy (buf, pname);
+	      strcat_to_buf (string, strSize, buf);
+	      sprintf (buf, "%10s", LINE_PREFIX);
+	      strcat_to_buf (string, strSize, buf);
+	      strcat_to_buf (string, strSize, lineNo);
+	      sprintf (buf, "%10s", PC_PREFIX);
+	      strcat_to_buf (string, strSize, buf);
+	      strcat_to_buf (string, strSize, pc);
+	      for (i = strlen (string); i < strSize; i++)
+		string[i] = ' ';
+	      string[strSize] = (char) 0;
+	    }
+	  break;
+	case EXEC_INFO_WIN:
+	  string = elementPtr->whichElement.simpleString;
+	  break;
+	default:
+	  break;
+	}
+    }
+  return string;
+}				/* displayableWinContentOf */
+
+
+/*
+**    winContentAt().
+**        Answer a the content at the location indicated by index
+*/
+char *
+#ifdef __STDC__
+displayableWinContentAt (
+			  TuiGenWinInfoPtr winInfo,
+			  int index)
+#else
+displayableWinContentAt (winInfo, index)
+     TuiGenWinInfoPtr winInfo;
+     int index;
+#endif
+{
+  return (displayableWinContentOf (winInfo, (TuiWinElementPtr) winInfo->content[index]));
+}				/* winContentAt */
+
+
+/*
+** winElementHeight().
+**        Answer the height of the element in lines
+*/
+int
+#ifdef __STDC__
+winElementHeight (
+		   TuiGenWinInfoPtr winInfo,
+		   TuiWinElementPtr element)
+#else
+winElementHeight (winInfo, element)
+     TuiGenWinInfoPtr winInfo;
+     TuiWinElementPtr element;
+#endif
+{
+  int h;
+
+  if (winInfo->type == DATA_WIN)
+/* FOR NOW SAY IT IS ONLY ONE LINE HIGH */
+    h = 1;
+  else
+    h = 1;
+
+  return h;
+}				/* winElementHeight */
+
+
+/*
+**  winByName().
+**      Answer the window represented by name
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+winByName (
+	    char *name)
+#else
+winByName (name)
+     char *name;
+#endif
+{
+  TuiWinInfoPtr winInfo = (TuiWinInfoPtr) NULL;
+  int i = 0;
+
+  while (i < MAX_MAJOR_WINDOWS && m_winPtrIsNull (winInfo))
+    {
+      if (strcmp (name, winName (&(winList[i]->generic))) == 0)
+	winInfo = winList[i];
+      i++;
+    }
+
+  return winInfo;
+}				/* winByName */
+
+
+/*
+**  partialWinByName().
+**      Answer the window represented by name
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+partialWinByName (
+		   char *name)
+#else
+partialWinByName (name)
+     char *name;
+#endif
+{
+  TuiWinInfoPtr winInfo = (TuiWinInfoPtr) NULL;
+
+  if (name != (char *) NULL)
+    {
+      int i = 0;
+
+      while (i < MAX_MAJOR_WINDOWS && m_winPtrIsNull (winInfo))
+	{
+	  char *curName = winName (&winList[i]->generic);
+	  if (strlen (name) <= strlen (curName) &&
+	      strncmp (name, curName, strlen (name)) == 0)
+	    winInfo = winList[i];
+	  i++;
+	}
+    }
+
+  return winInfo;
+}				/* partialWinByName */
+
+
+/*
+** winName().
+**      Answer the name of the window
+*/
+char *
+#ifdef __STDC__
+winName (
+	  TuiGenWinInfoPtr winInfo)
+#else
+winName (winInfo)
+     TuiGenWinInfoPtr winInfo;
+#endif
+{
+  char *name = (char *) NULL;
+
+  switch (winInfo->type)
+    {
+    case SRC_WIN:
+      name = SRC_NAME;
+      break;
+    case CMD_WIN:
+      name = CMD_NAME;
+      break;
+    case DISASSEM_WIN:
+      name = DISASSEM_NAME;
+      break;
+    case DATA_WIN:
+      name = DATA_NAME;
+      break;
+    default:
+      name = "";
+      break;
+    }
+
+  return name;
+}				/* winName */
+
+
+/*
+** initializeStaticData
+*/
+void
+#ifdef __STDC__
+initializeStaticData (void)
+#else
+initializeStaticData ()
+#endif
+{
+  initGenericPart (sourceExecInfoWinPtr ());
+  initGenericPart (disassemExecInfoWinPtr ());
+  initGenericPart (locatorWinInfoPtr ());
+
+  return;
+}				/* initializeStaticData */
+
+
+/*
+** allocGenericWinInfo().
+*/
+TuiGenWinInfoPtr
+#ifdef __STDC__
+allocGenericWinInfo (void)
+#else
+allocGenericWinInfo ()
+#endif
+{
+  TuiGenWinInfoPtr win;
+
+  if ((win = (TuiGenWinInfoPtr) xmalloc (
+		     sizeof (TuiGenWinInfoPtr))) != (TuiGenWinInfoPtr) NULL)
+    initGenericPart (win);
+
+  return win;
+}				/* allocGenericWinInfo */
+
+
+/*
+** initGenericPart().
+*/
+void
+#ifdef __STDC__
+initGenericPart (
+		  TuiGenWinInfoPtr win)
+#else
+initGenericPart (win)
+     TuiGenWinInfoPtr win;
+#endif
+{
+  win->width =
+    win->height =
+    win->origin.x =
+    win->origin.y =
+    win->viewportHeight =
+    win->contentSize =
+    win->lastVisibleLine = 0;
+  win->handle = (WINDOW *) NULL;
+  win->content = (OpaquePtr) NULL;
+  win->contentInUse =
+    win->isVisible = FALSE;
+
+  return;
+}				/* initGenericPart */
+
+
+/*
+** initContentElement().
+*/
+void
+#ifdef __STDC__
+initContentElement (
+		     TuiWinElementPtr element,
+		     TuiWinType type)
+#else
+initContentElement (element, type)
+     TuiWinElementPtr element;
+     TuiWinType type;
+#endif
+{
+  element->highlight = FALSE;
+  switch (type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      element->whichElement.source.line = (char *) NULL;
+      element->whichElement.source.lineOrAddr.lineNo = 0;
+      element->whichElement.source.isExecPoint = FALSE;
+      element->whichElement.source.hasBreak = FALSE;
+      break;
+    case DATA_WIN:
+      initGenericPart (&element->whichElement.dataWindow);
+      element->whichElement.dataWindow.type = DATA_ITEM_WIN;
+      ((TuiGenWinInfoPtr) & element->whichElement.dataWindow)->content =
+	(OpaquePtr) allocContent (1, DATA_ITEM_WIN);
+      ((TuiGenWinInfoPtr)
+       & element->whichElement.dataWindow)->contentSize = 1;
+      break;
+    case CMD_WIN:
+      element->whichElement.command.line = (char *) NULL;
+      break;
+    case DATA_ITEM_WIN:
+      element->whichElement.data.name = (char *) NULL;
+      element->whichElement.data.type = TUI_REGISTER;
+      element->whichElement.data.itemNo = UNDEFINED_ITEM;
+      element->whichElement.data.value = (Opaque) NULL;
+      element->whichElement.data.highlight = FALSE;
+      break;
+    case LOCATOR_WIN:
+      element->whichElement.locator.fileName[0] =
+	element->whichElement.locator.procName[0] = (char) 0;
+      element->whichElement.locator.lineNo = 0;
+      element->whichElement.locator.addr = 0;
+      break;
+    case EXEC_INFO_WIN:
+      element->whichElement.simpleString = blankStr ();
+      break;
+    default:
+      break;
+    }
+  return;
+}				/* initContentElement */
+
+/*
+** initWinInfo().
+*/
+void
+#ifdef __STDC__
+initWinInfo (
+	      TuiWinInfoPtr winInfo)
+#else
+initWinInfo (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  initGenericPart (&winInfo->generic);
+  winInfo->canHighlight =
+    winInfo->isHighlighted = FALSE;
+  switch (winInfo->generic.type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      winInfo->detail.sourceInfo.executionInfo = (TuiGenWinInfoPtr) NULL;
+      winInfo->detail.sourceInfo.hasLocator = FALSE;
+      winInfo->detail.sourceInfo.horizontalOffset = 0;
+      winInfo->detail.sourceInfo.startLineOrAddr.addr = (Opaque) NULL;
+      break;
+    case DATA_WIN:
+      winInfo->detail.dataDisplayInfo.dataContent = (TuiWinContent) NULL;
+      winInfo->detail.dataDisplayInfo.dataContentCount = 0;
+      winInfo->detail.dataDisplayInfo.regsContent = (TuiWinContent) NULL;
+      winInfo->detail.dataDisplayInfo.regsContentCount = 0;
+      winInfo->detail.dataDisplayInfo.regsDisplayType =
+	TUI_UNDEFINED_REGS;
+      winInfo->detail.dataDisplayInfo.regsColumnCount = 1;
+      winInfo->detail.dataDisplayInfo.displayRegs = FALSE;
+      break;
+    case CMD_WIN:
+      winInfo->detail.commandInfo.curLine = 0;
+      winInfo->detail.commandInfo.curch = 0;
+      break;
+    default:
+      winInfo->detail.opaque = (Opaque) NULL;
+      break;
+    }
+
+  return;
+}				/* initWinInfo */
+
+
+/*
+** allocWinInfo().
+*/
+TuiWinInfoPtr
+#ifdef __STDC__
+allocWinInfo (
+	       TuiWinType type)
+#else
+allocWinInfo (type)
+     TuiWinType type;
+#endif
+{
+  TuiWinInfoPtr winInfo = (TuiWinInfoPtr) NULL;
+
+  winInfo = (TuiWinInfoPtr) xmalloc (sizeof (TuiWinInfo));
+  if (m_winPtrNotNull (winInfo))
+    {
+      winInfo->generic.type = type;
+      initWinInfo (winInfo);
+    }
+
+  return winInfo;
+}				/* allocWinInfo */
+
+
+/*
+** allocContent().
+**        Allocates the content and elements in a block.
+*/
+TuiWinContent
+#ifdef __STDC__
+allocContent (
+	       int numElements,
+	       TuiWinType type)
+#else
+allocContent (numElements, type)
+     int numElements;
+     TuiWinType type;
+#endif
+{
+  TuiWinContent content = (TuiWinContent) NULL;
+  char *elementBlockPtr = (char *) NULL;
+  int i;
+
+  if ((content = (TuiWinContent)
+  xmalloc (sizeof (TuiWinElementPtr) * numElements)) != (TuiWinContent) NULL)
+    {				/*
+        ** All windows, except the data window, can allocate the elements
+        ** in a chunk.  The data window cannot because items can be
+        ** added/removed from the data display by the user at any time.
+        */
+      if (type != DATA_WIN)
+	{
+	  if ((elementBlockPtr = (char *)
+	   xmalloc (sizeof (TuiWinElement) * numElements)) != (char *) NULL)
+	    {
+	      for (i = 0; i < numElements; i++)
+		{
+		  content[i] = (TuiWinElementPtr) elementBlockPtr;
+		  initContentElement (content[i], type);
+		  elementBlockPtr += sizeof (TuiWinElement);
+		}
+	    }
+	  else
+	    {
+	      tuiFree ((char *) content);
+	      content = (TuiWinContent) NULL;
+	    }
+	}
+    }
+
+  return content;
+}				/* allocContent */
+
+
+/*
+** addContentElements().
+**        Adds the input number of elements to the windows's content.  If
+**        no content has been allocated yet, allocContent() is called to
+**        do this.  The index of the first element added is returned,
+**        unless there is a memory allocation error, in which case, (-1)
+**        is returned.
+*/
+int
+#ifdef __STDC__
+addContentElements (
+		     TuiGenWinInfoPtr winInfo,
+		     int numElements)
+#else
+addContentElements (winInfo, numElements)
+     TuiGenWinInfoPtr winInfo;
+     int numElements;
+#endif
+{
+  TuiWinElementPtr elementPtr;
+  int i, indexStart;
+
+  if (winInfo->content == (OpaquePtr) NULL)
+    {
+      winInfo->content = (OpaquePtr) allocContent (numElements, winInfo->type);
+      indexStart = 0;
+    }
+  else
+    indexStart = winInfo->contentSize;
+  if (winInfo->content != (OpaquePtr) NULL)
+    {
+      for (i = indexStart; (i < numElements + indexStart); i++)
+	{
+	  if ((elementPtr = (TuiWinElementPtr)
+	       xmalloc (sizeof (TuiWinElement))) != (TuiWinElementPtr) NULL)
+	    {
+	      winInfo->content[i] = (Opaque) elementPtr;
+	      initContentElement (elementPtr, winInfo->type);
+	      winInfo->contentSize++;
+	    }
+	  else			/* things must be really hosed now! We ran out of memory!?*/
+	    return (-1);
+	}
+    }
+
+  return indexStart;
+}				/* addContentElements */
+
+
+/*
+**  tuiDelWindow().
+**     Delete all curses windows associated with winInfo, leaving everything
+**     else in tact.
+*/
+void
+#ifdef __STDC__
+tuiDelWindow (
+	       TuiWinInfoPtr winInfo)
+#else
+tuiDelWindow (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  Opaque detail;
+  int i;
+  TuiGenWinInfoPtr genericWin;
+
+
+  switch (winInfo->generic.type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      genericWin = locatorWinInfoPtr ();
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	  genericWin->isVisible = FALSE;
+	}
+      genericWin = winInfo->detail.sourceInfo.executionInfo;
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	  genericWin->isVisible = FALSE;
+	}
+      break;
+    case DATA_WIN:
+      if (winInfo->generic.content != (OpaquePtr) NULL)
+	{
+	  int i;
+
+	  tuiDelDataWindows (
+			      winInfo->detail.dataDisplayInfo.regsContent,
+			  winInfo->detail.dataDisplayInfo.regsContentCount);
+	  tuiDelDataWindows (
+			      winInfo->detail.dataDisplayInfo.dataContent,
+			  winInfo->detail.dataDisplayInfo.dataContentCount);
+	}
+      break;
+    default:
+      break;
+    }
+  if (winInfo->generic.handle != (WINDOW *) NULL)
+    {
+      tuiDelwin (winInfo->generic.handle);
+      winInfo->generic.handle = (WINDOW *) NULL;
+      winInfo->generic.isVisible = FALSE;
+    }
+
+  return;
+}				/* tuiDelWindow */
+
+
+/*
+**  freeWindow().
+*/
+void
+#ifdef __STDC__
+freeWindow (
+	     TuiWinInfoPtr winInfo)
+#else
+freeWindow (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  Opaque detail;
+  int i;
+  TuiGenWinInfoPtr genericWin;
+
+
+  switch (winInfo->generic.type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      genericWin = locatorWinInfoPtr ();
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	}
+      freeWinContent (genericWin);
+      genericWin = winInfo->detail.sourceInfo.executionInfo;
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	  freeWinContent (genericWin);
+	}
+      break;
+    case DATA_WIN:
+      if (winInfo->generic.content != (OpaquePtr) NULL)
+	{
+	  freeDataContent (
+			    winInfo->detail.dataDisplayInfo.regsContent,
+			  winInfo->detail.dataDisplayInfo.regsContentCount);
+	  winInfo->detail.dataDisplayInfo.regsContent =
+	    (TuiWinContent) NULL;
+	  winInfo->detail.dataDisplayInfo.regsContentCount = 0;
+	  freeDataContent (
+			    winInfo->detail.dataDisplayInfo.dataContent,
+			  winInfo->detail.dataDisplayInfo.dataContentCount);
+	  winInfo->detail.dataDisplayInfo.dataContent =
+	    (TuiWinContent) NULL;
+	  winInfo->detail.dataDisplayInfo.dataContentCount = 0;
+	  winInfo->detail.dataDisplayInfo.regsDisplayType =
+	    TUI_UNDEFINED_REGS;
+	  winInfo->detail.dataDisplayInfo.regsColumnCount = 1;
+	  winInfo->detail.dataDisplayInfo.displayRegs = FALSE;
+	  winInfo->generic.content = (OpaquePtr) NULL;
+	  winInfo->generic.contentSize = 0;
+	}
+      break;
+    default:
+      break;
+    }
+  if (winInfo->generic.handle != (WINDOW *) NULL)
+    {
+      tuiDelwin (winInfo->generic.handle);
+      winInfo->generic.handle = (WINDOW *) NULL;
+      freeWinContent (&winInfo->generic);
+    }
+  free (winInfo);
+
+  return;
+}				/* freeWindow */
+
+
+/*
+** freeAllSourceWinsContent().
+*/
+void
+#ifdef __STDC__
+freeAllSourceWinsContent (void)
+#else
+freeAllSourceWinsContent ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    {
+      TuiWinInfoPtr winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[i];
+
+      if (m_winPtrNotNull (winInfo))
+	{
+	  freeWinContent (&(winInfo->generic));
+	  freeWinContent (winInfo->detail.sourceInfo.executionInfo);
+	}
+    }
+
+  return;
+}				/* freeAllSourceWinsContent */
+
+
+/*
+** freeWinContent().
+*/
+void
+#ifdef __STDC__
+freeWinContent (
+		 TuiGenWinInfoPtr winInfo)
+#else
+freeWinContent (winInfo)
+     TuiGenWinInfoPtr winInfo;
+#endif
+{
+  if (winInfo->content != (OpaquePtr) NULL)
+    {
+      freeContent ((TuiWinContent) winInfo->content,
+		   winInfo->contentSize,
+		   winInfo->type);
+      winInfo->content = (OpaquePtr) NULL;
+    }
+  winInfo->contentSize = 0;
+
+  return;
+}				/* freeWinContent */
+
+
+/*
+** freeAllWindows().
+*/
+void
+#ifdef __STDC__
+freeAllWindows (void)
+#else
+freeAllWindows ()
+#endif
+{
+  TuiWinType type = SRC_WIN;
+
+  for (; type < MAX_MAJOR_WINDOWS; type++)
+    if (m_winPtrNotNull (winList[type]) &&
+	winList[type]->generic.type != UNDEFINED_WIN)
+      freeWindow (winList[type]);
+  return;
+}				/* freeAllWindows */
+
+
+void
+#ifdef __STDC__
+tuiDelDataWindows (
+		    TuiWinContent content,
+		    int contentSize)
+#else
+tuiDelDataWindows (content, contentSize)
+     TuiWinContent content;
+     int contentSize;
+#endif
+{
+  int i;
+
+  /*
+    ** Remember that data window content elements are of type TuiGenWinInfoPtr,
+    ** each of which whose single element is a data element.
+    */
+  for (i = 0; i < contentSize; i++)
+    {
+      TuiGenWinInfoPtr genericWin = &content[i]->whichElement.dataWindow;
+
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	  genericWin->isVisible = FALSE;
+	}
+    }
+
+  return;
+}				/* tuiDelDataWindows */
+
+
+void
+#ifdef __STDC__
+freeDataContent (
+		  TuiWinContent content,
+		  int contentSize)
+#else
+freeDataContent (content, contentSize)
+     TuiWinContent content;
+     int contentSize;
+#endif
+{
+  int i;
+
+  /*
+    ** Remember that data window content elements are of type TuiGenWinInfoPtr,
+    ** each of which whose single element is a data element.
+    */
+  for (i = 0; i < contentSize; i++)
+    {
+      TuiGenWinInfoPtr genericWin = &content[i]->whichElement.dataWindow;
+
+      if (genericWin != (TuiGenWinInfoPtr) NULL)
+	{
+	  tuiDelwin (genericWin->handle);
+	  genericWin->handle = (WINDOW *) NULL;
+	  freeWinContent (genericWin);
+	}
+    }
+  freeContent (content,
+	       contentSize,
+	       DATA_WIN);
+
+  return;
+}				/* freeDataContent */
+
+
+/**********************************
+** LOCAL STATIC FUNCTIONS        **
+**********************************/
+
+
+/*
+** freeContent().
+*/
+static void
+#ifdef __STDC__
+freeContent (
+	      TuiWinContent content,
+	      int contentSize,
+	      TuiWinType winType)
+#else
+freeContent (content, contentSize, winType)
+     TuiWinContent content;
+     int contentSize;
+     TuiWinType winType;
+#endif
+{
+  if (content != (TuiWinContent) NULL)
+    {
+      freeContentElements (content, contentSize, winType);
+      tuiFree ((char *) content);
+    }
+
+  return;
+}				/* freeContent */
+
+
+/*
+** freeContentElements().
+*/
+static void
+#ifdef __STDC__
+freeContentElements (
+		      TuiWinContent content,
+		      int contentSize,
+		      TuiWinType type)
+#else
+freeContentElements (content, contentSize, type)
+     TuiWinContent content;
+     int contentSize;
+     TuiWinType type;
+#endif
+{
+  if (content != (TuiWinContent) NULL)
+    {
+      int i;
+
+      if (type == SRC_WIN || type == DISASSEM_WIN)
+	{
+	  /* free whole source block */
+	  if (content[0]->whichElement.source.line != (char *) NULL)
+	    tuiFree (content[0]->whichElement.source.line);
+	}
+      else
+	{
+	  for (i = 0; i < contentSize; i++)
+	    {
+	      TuiWinElementPtr element;
+
+	      element = content[i];
+	      if (element != (TuiWinElementPtr) NULL)
+		{
+		  switch (type)
+		    {
+		    case DATA_WIN:
+		      tuiFree ((char *) element);
+		      break;
+		    case DATA_ITEM_WIN:
+		      /*
+                            ** Note that data elements are not allocated
+                            ** in a single block, but individually, as needed.
+                            */
+		      if (element->whichElement.data.type != TUI_REGISTER)
+			tuiFree ((char *)
+				 element->whichElement.data.name);
+		      tuiFree ((char *) element->whichElement.data.value);
+		      tuiFree ((char *) element);
+		      break;
+		    case CMD_WIN:
+		      tuiFree ((char *) element->whichElement.command.line);
+		      break;
+		    default:
+		      break;
+		    }
+		}
+	    }
+	}
+      if (type != DATA_WIN && type != DATA_ITEM_WIN)
+	tuiFree ((char *) content[0]);	/* free the element block */
+    }
+
+  return;
+}				/* freeContentElements */
diff --git a/gdb/tui/tuiData.h b/gdb/tui/tuiData.h
new file mode 100644
index 0000000..bb4d19c
--- /dev/null
+++ b/gdb/tui/tuiData.h
@@ -0,0 +1,302 @@
+#ifndef TUI_DATA_H
+#define TUI_DATA_H
+
+/* Constant definitions */
+#define DEFAULT_TAB_LEN                8
+#define NO_SRC_STRING                  "[ No Source Available ]"
+#define NO_DISASSEM_STRING             "[ No Assembly Available ]"
+#define NO_REGS_STRING                 "[ Register Values Unavailable ]"
+#define NO_DATA_STRING                 "[ No Data Values Displayed ]"
+#define MAX_CONTENT_COUNT              100
+#define SRC_NAME                       "SRC"
+#define CMD_NAME                       "CMD"
+#define DATA_NAME                      "REGS"
+#define DISASSEM_NAME                  "ASM"
+#define TUI_NULL_STR                   ""
+#define DEFAULT_HISTORY_COUNT          25
+#define BOX_WINDOW                     TRUE
+#define DONT_BOX_WINDOW                FALSE
+#define HILITE                         TRUE
+#define NO_HILITE                      FALSE
+#define WITH_LOCATOR                   TRUE
+#define NO_LOCATOR                     FALSE
+#define EMPTY_SOURCE_PROMPT            TRUE
+#define NO_EMPTY_SOURCE_PROMPT         FALSE
+#define UNDEFINED_ITEM                 -1
+#define MIN_WIN_HEIGHT                 3
+#define MIN_CMD_WIN_HEIGHT             3
+
+#define FILE_PREFIX                    "File: "
+#define PROC_PREFIX                    "Procedure: "
+#define LINE_PREFIX                    "Line: "
+#define PC_PREFIX                      "pc: "
+
+#define TUI_FLOAT_REGS_NAME                  "$FREGS"
+#define TUI_FLOAT_REGS_NAME_LOWER            "$fregs"
+#define TUI_GENERAL_REGS_NAME                "$GREGS"
+#define TUI_GENERAL_REGS_NAME_LOWER          "$gregs"
+#define TUI_SPECIAL_REGS_NAME                "$SREGS"
+#define TUI_SPECIAL_REGS_NAME_LOWER          "$sregs"
+#define TUI_GENERAL_SPECIAL_REGS_NAME        "$REGS"
+#define TUI_GENERAL_SPECIAL_REGS_NAME_LOWER  "$regs"
+
+/* Scroll direction enum */
+typedef enum {
+    FORWARD_SCROLL,
+    BACKWARD_SCROLL,
+    LEFT_SCROLL,
+    RIGHT_SCROLL
+} TuiScrollDirection, *TuiScrollDirectionPtr;
+
+
+/* General list struct */
+typedef struct    _TuiList {
+    OpaqueList    list;
+    int            count;
+} TuiList, *TuiListPtr;
+
+
+/* The kinds of layouts available */
+typedef enum {
+    SRC_COMMAND,
+    DISASSEM_COMMAND,
+    SRC_DISASSEM_COMMAND,
+    SRC_DATA_COMMAND,
+    DISASSEM_DATA_COMMAND,
+    UNDEFINED_LAYOUT
+} TuiLayoutType, *TuiLayoutTypePtr;
+
+/* Basic data types that can be displayed in the data window. */
+typedef enum _TuiDataType {
+    TUI_REGISTER,
+    TUI_SCALAR,
+    TUI_COMPLEX,
+    TUI_STRUCT
+} TuiDataType, TuiDataTypePtr;
+
+/* Types of register displays */
+typedef enum _TuiRegisterDisplayType {
+    TUI_UNDEFINED_REGS,
+    TUI_GENERAL_REGS,
+    TUI_SFLOAT_REGS,
+    TUI_DFLOAT_REGS,
+    TUI_SPECIAL_REGS,
+    TUI_GENERAL_AND_SPECIAL_REGS
+} TuiRegisterDisplayType, *TuiRegisterDisplayTypePtr;
+
+/* Structure describing source line or line address */
+typedef union _TuiLineOrAddress {
+    int           lineNo;
+    Opaque        addr;
+} TuiLineOrAddress, *TuiLineOrAddressPtr;
+
+/* Current Layout definition */
+typedef struct _TuiLayoutDef {
+    TuiWinType                 displayMode;
+    int                        split;
+    TuiRegisterDisplayType     regsDisplayType;
+    TuiRegisterDisplayType     floatRegsDisplayType;
+} TuiLayoutDef, *TuiLayoutDefPtr;
+
+/* Elements in the Source/Disassembly Window */
+typedef struct _TuiSourceElement
+{
+    char                *line;
+    TuiLineOrAddress    lineOrAddr;
+    int                 isExecPoint;
+    int                 hasBreak;
+} TuiSourceElement, *TuiSourceElementPtr;
+
+
+/* Elements in the data display window content */
+typedef struct _TuiDataElement
+{
+    char        *name;
+    int         itemNo;    /* the register number, or data display number */
+    TuiDataType type;
+    Opaque      value;
+    int         highlight;
+} TuiDataElement, *TuiDataElementPtr;
+
+
+/* Elements in the command window content */
+typedef struct _TuiCommandElement
+{
+    char    *line;
+} TuiCommandElement, *TuiCommandElementPtr;
+
+
+#define MAX_LOCATOR_ELEMENT_LEN        100
+
+/* Elements in the locator window content */
+typedef struct _TuiLocatorElement
+{
+    char        fileName[MAX_LOCATOR_ELEMENT_LEN];
+    char        procName[MAX_LOCATOR_ELEMENT_LEN];
+    int         lineNo;
+    Opaque      addr;
+} TuiLocatorElement, *TuiLocatorElementPtr;
+
+
+/* An content element in a window */
+typedef union
+{
+    TuiSourceElement       source; /* the source elements */
+    TuiGenWinInfo          dataWindow; /* data display elements */
+    TuiDataElement         data; /* elements of dataWindow */
+    TuiCommandElement      command; /* command elements */
+    TuiLocatorElement      locator; /* locator elements */
+    char                   *simpleString; /* simple char based elements */
+} TuiWhichElement, *TuiWhichElementPtr;
+
+typedef struct _TuiWinElement
+{
+    int            highlight;
+    TuiWhichElement whichElement;
+} TuiWinElement, *TuiWinElementPtr;
+
+
+/* This describes the content of the window. */
+typedef        TuiWinElementPtr    *TuiWinContent;
+
+
+/* This struct defines the specific information about a data display window */
+typedef struct _TuiDataInfo {
+    TuiWinContent            dataContent; /* start of data display content */
+    int                      dataContentCount;
+    TuiWinContent            regsContent; /* start of regs display content */
+    int                      regsContentCount;
+    TuiRegisterDisplayType   regsDisplayType;
+    int                      regsColumnCount;
+    int                      displayRegs; /* Should regs be displayed at all? */
+} TuiDataInfo, *TuiDataInfoPtr;
+
+
+typedef struct _TuiSourceInfo {
+    int                 hasLocator; /* Does locator belongs to this window? */
+    TuiGenWinInfoPtr    executionInfo; /* execution information window */
+    int                 horizontalOffset; /* used for horizontal scroll */
+    TuiLineOrAddress    startLineOrAddr;
+} TuiSourceInfo, *TuiSourceInfoPtr;
+
+
+typedef struct _TuiCommandInfo {
+    int            curLine;   /* The current line position */
+    int            curch;     /* The current cursor position */
+} TuiCommandInfo, *TuiCommandInfoPtr;
+
+
+/* This defines information about each logical window */
+typedef struct _TuiWinInfo {
+    TuiGenWinInfo            generic;        /* general window information */
+    union {
+        TuiSourceInfo        sourceInfo;
+        TuiDataInfo          dataDisplayInfo;
+        TuiCommandInfo       commandInfo;
+        Opaque               opaque;
+    } detail;
+    int                 canHighlight; /* Can this window ever be highlighted? */
+    int                 isHighlighted; /* Is this window highlighted? */
+} TuiWinInfo, *TuiWinInfoPtr;
+
+/* MACROS (prefixed with m_) */
+
+/* Testing macros */
+#define        m_genWinPtrIsNull(winInfo) \
+                ((winInfo) == (TuiGenWinInfoPtr)NULL)
+#define        m_genWinPtrNotNull(winInfo) \
+                ((winInfo) != (TuiGenWinInfoPtr)NULL)
+#define        m_winPtrIsNull(winInfo) \
+                ((winInfo) == (TuiWinInfoPtr)NULL)
+#define        m_winPtrNotNull(winInfo) \
+                ((winInfo) != (TuiWinInfoPtr)NULL)
+
+#define        m_winIsSourceType(type) \
+                (type == SRC_WIN || type == DISASSEM_WIN)
+#define        m_winIsAuxillary(winType) \
+                (winType > MAX_MAJOR_WINDOWS)
+#define        m_hasLocator(winInfo) \
+                ( ((winInfo) != (TuiWinInfoPtr)NULL) ? \
+                    (winInfo->detail.sourceInfo.hasLocator) : \
+                    FALSE )
+
+#define     m_setWinHighlightOn(winInfo) \
+                if ((winInfo) != (TuiWinInfoPtr)NULL) \
+                              (winInfo)->isHighlighted = TRUE
+#define     m_setWinHighlightOff(winInfo) \
+                if ((winInfo) != (TuiWinInfoPtr)NULL) \
+                              (winInfo)->isHighlighted = FALSE
+
+
+/* Global Data */
+extern TuiWinInfoPtr      winList[MAX_MAJOR_WINDOWS];
+extern int                tui_version;
+
+/* Macros */
+#define srcWin            winList[SRC_WIN]
+#define disassemWin       winList[DISASSEM_WIN]
+#define dataWin           winList[DATA_WIN]
+#define cmdWin            winList[CMD_WIN]
+
+/* Data Manipulation Functions */
+extern void               initializeStaticData PARAMS ((void));
+extern TuiGenWinInfoPtr   allocGenericWinInfo PARAMS ((void));
+extern TuiWinInfoPtr      allocWinInfo PARAMS ((TuiWinType));
+extern void               initGenericPart PARAMS ((TuiGenWinInfoPtr));
+extern void               initWinInfo PARAMS ((TuiWinInfoPtr));
+extern TuiWinContent      allocContent PARAMS ((int, TuiWinType));
+extern int                addContentElements 
+                             PARAMS ((TuiGenWinInfoPtr, int));
+extern void               initContentElement 
+                             PARAMS ((TuiWinElementPtr, TuiWinType));
+extern void               freeWindow PARAMS ((TuiWinInfoPtr));
+extern void               freeAllWindows PARAMS ((void));
+extern void               freeWinContent PARAMS ((TuiGenWinInfoPtr));
+extern void               freeDataContent PARAMS ((TuiWinContent, int));
+extern void               freeAllSourceWinsContent PARAMS ((void));
+extern void               tuiDelWindow PARAMS ((TuiWinInfoPtr));
+extern void               tuiDelDataWindows PARAMS ((TuiWinContent, int));
+extern TuiWinInfoPtr      winByName PARAMS ((char *));
+extern TuiWinInfoPtr      partialWinByName PARAMS ((char *));
+extern char               *winName PARAMS ((TuiGenWinInfoPtr));
+extern char               *displayableWinContentOf 
+                             PARAMS ((TuiGenWinInfoPtr, TuiWinElementPtr));
+extern char               *displayableWinContentAt 
+                             PARAMS ((TuiGenWinInfoPtr, int));
+extern int                winElementHeight 
+                             PARAMS ((TuiGenWinInfoPtr, TuiWinElementPtr));
+extern TuiLayoutType      currentLayout PARAMS ((void));
+extern void               setCurrentLayoutTo PARAMS ((TuiLayoutType));
+extern int                termHeight PARAMS ((void));
+extern void               setTermHeight PARAMS ((int));
+extern int                termWidth PARAMS ((void));
+extern void               setTermWidth PARAMS ((int));
+extern int                historyLimit PARAMS ((void));
+extern void               setHistoryLimit PARAMS ((int));
+extern void               setGenWinOrigin PARAMS ((TuiGenWinInfoPtr, int, int));
+extern TuiGenWinInfoPtr   locatorWinInfoPtr PARAMS ((void));
+extern TuiGenWinInfoPtr   sourceExecInfoWinPtr PARAMS ((void));
+extern TuiGenWinInfoPtr   disassemExecInfoWinPtr PARAMS ((void));
+extern char               *nullStr PARAMS ((void));
+extern char               *blankStr PARAMS ((void));
+extern char               *locationStr PARAMS ((void));
+extern char               *breakStr PARAMS ((void));
+extern char               *breakLocationStr PARAMS ((void));
+extern TuiListPtr         sourceWindows PARAMS ((void));
+extern void               clearSourceWindows PARAMS ((void));
+extern void               clearSourceWindowsDetail PARAMS ((void));
+extern void               clearWinDetail PARAMS ((TuiWinInfoPtr   winInfo));
+extern void               tuiAddToSourceWindows PARAMS ((TuiWinInfoPtr));
+extern int                tuiDefaultTabLen PARAMS ((void));
+extern void               tuiSetDefaultTabLen PARAMS ((int));
+extern TuiWinInfoPtr      tuiWinWithFocus PARAMS ((void));
+extern void               tuiSetWinWithFocus PARAMS ((TuiWinInfoPtr));
+extern TuiLayoutDefPtr    tuiLayoutDef PARAMS ((void));
+extern int                tuiWinResized PARAMS ((void));
+extern void               tuiSetWinResizedTo PARAMS ((int));
+
+extern TuiWinInfoPtr      tuiNextWin PARAMS ((TuiWinInfoPtr));
+extern TuiWinInfoPtr      tuiPrevWin PARAMS ((TuiWinInfoPtr));
+
+
+#endif /* TUI_DATA_H */
diff --git a/gdb/tui/tuiDataWin.c b/gdb/tui/tuiDataWin.c
new file mode 100644
index 0000000..522730a
--- /dev/null
+++ b/gdb/tui/tuiDataWin.c
@@ -0,0 +1,400 @@
+/*
+** tuiDataWin.c
+**   This module contains functions to support the data/register window display.
+*/
+
+
+#include "defs.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiRegs.h"
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                        **
+******************************************/
+
+
+/*
+** tuiFirstDataItemDisplayed()
+**    Answer the index first element displayed.
+**    If none are displayed, then return (-1).
+*/
+int
+#ifdef __STDC__
+tuiFirstDataItemDisplayed (void)
+#else
+tuiFirstDataItemDisplayed ()
+#endif
+{
+  int elementNo = (-1);
+  int i;
+
+  for (i = 0; (i < dataWin->generic.contentSize && elementNo < 0); i++)
+    {
+      TuiGenWinInfoPtr dataItemWin;
+
+      dataItemWin = &((TuiWinContent)
+		      dataWin->generic.content)[i]->whichElement.dataWindow;
+      if (dataItemWin->handle != (WINDOW *) NULL && dataItemWin->isVisible)
+	elementNo = i;
+    }
+
+  return elementNo;
+}				/* tuiFirstDataItemDisplayed */
+
+
+/*
+** tuiFirstDataElementNoInLine()
+**        Answer the index of the first element in lineNo.  If lineNo is
+**        past the data area (-1) is returned.
+*/
+int
+#ifdef __STDC__
+tuiFirstDataElementNoInLine (
+			      int lineNo)
+#else
+tuiFirstDataElementNoInLine (lineNo)
+     int lineNo;
+#endif
+{
+  int firstElementNo = (-1);
+
+  /*
+    ** First see if there is a register on lineNo, and if so, set the
+    ** first element number
+    */
+  if ((firstElementNo = tuiFirstRegElementNoInLine (lineNo)) == -1)
+    {				/*
+      ** Looking at the general data, the 1st element on lineNo
+      */
+    }
+
+  return firstElementNo;
+}				/* tuiFirstDataElementNoInLine */
+
+
+/*
+** tuiDeleteDataContentWindows()
+**        Function to delete all the item windows in the data window.
+**        This is usually done when the data window is scrolled.
+*/
+void
+#ifdef __STDC__
+tuiDeleteDataContentWindows (void)
+#else
+tuiDeleteDataContentWindows ()
+#endif
+{
+  int i;
+  TuiGenWinInfoPtr dataItemWinPtr;
+
+  for (i = 0; (i < dataWin->generic.contentSize); i++)
+    {
+      dataItemWinPtr = &((TuiWinContent)
+		      dataWin->generic.content)[i]->whichElement.dataWindow;
+      tuiDelwin (dataItemWinPtr->handle);
+      dataItemWinPtr->handle = (WINDOW *) NULL;
+      dataItemWinPtr->isVisible = FALSE;
+    }
+
+  return;
+}				/* tuiDeleteDataContentWindows */
+
+
+void
+#ifdef __STDC__
+tuiEraseDataContent (
+		      char *prompt)
+#else
+tuiEraseDataContent (prompt)
+     char *prompt;
+#endif
+{
+  werase (dataWin->generic.handle);
+  checkAndDisplayHighlightIfNeeded (dataWin);
+  if (prompt != (char *) NULL)
+    {
+      int halfWidth = (dataWin->generic.width - 2) / 2;
+      int xPos;
+
+      if (strlen (prompt) >= halfWidth)
+	xPos = 1;
+      else
+	xPos = halfWidth - strlen (prompt);
+      mvwaddstr (dataWin->generic.handle,
+		 (dataWin->generic.height / 2),
+		 xPos,
+		 prompt);
+    }
+  wrefresh (dataWin->generic.handle);
+
+  return;
+}				/* tuiEraseDataContent */
+
+
+/*
+** tuiDisplayAllData().
+**        This function displays the data that is in the data window's
+**        content.  It does not set the content.
+*/
+void
+#ifdef __STDC__
+tuiDisplayAllData (void)
+#else
+tuiDisplayAllData ()
+#endif
+{
+  if (dataWin->generic.contentSize <= 0)
+    tuiEraseDataContent (NO_DATA_STRING);
+  else
+    {
+      tuiEraseDataContent ((char *) NULL);
+      tuiDeleteDataContentWindows ();
+      checkAndDisplayHighlightIfNeeded (dataWin);
+      tuiDisplayRegistersFrom (0);
+      /*
+        ** Then display the other data
+        */
+      if (dataWin->detail.dataDisplayInfo.dataContent !=
+	  (TuiWinContent) NULL &&
+	  dataWin->detail.dataDisplayInfo.dataContentCount > 0)
+	{
+	}
+    }
+  return;
+}				/* tuiDisplayAllData */
+
+
+/*
+** tuiDisplayDataFromLine()
+**        Function to display the data starting at line, lineNo, in the
+**        data window.
+*/
+void
+#ifdef __STDC__
+tuiDisplayDataFromLine (
+			 int lineNo)
+#else
+tuiDisplayDataFromLine (lineNo)
+     int lineNo;
+#endif
+{
+  int _lineNo = lineNo;
+
+  if (lineNo < 0)
+    _lineNo = 0;
+
+  checkAndDisplayHighlightIfNeeded (dataWin);
+
+  /* there is no general data, force regs to display (if there are any) */
+  if (dataWin->detail.dataDisplayInfo.dataContentCount <= 0)
+    tuiDisplayRegistersFromLine (_lineNo, TRUE);
+  else
+    {
+      int elementNo, startLineNo;
+      int regsLastLine = tuiLastRegsLineNo ();
+
+
+      /* display regs if we can */
+      if (tuiDisplayRegistersFromLine (_lineNo, FALSE) < 0)
+	{			/*
+            ** _lineNo is past the regs display, so calc where the
+            ** start data element is
+            */
+	  if (regsLastLine < _lineNo)
+	    {			/* figure out how many lines each element is to obtain
+                    the start elementNo */
+	    }
+	}
+      else
+	{			/*
+           ** calculate the starting element of the data display, given
+           ** regsLastLine and how many lines each element is, up to
+           ** _lineNo
+           */
+	}
+      /* Now display the data , starting at elementNo */
+    }
+
+  return;
+}				/* tuiDisplayDataFromLine */
+
+
+/*
+** tuiDisplayDataFrom()
+**        Display data starting at element elementNo
+*/
+void
+#ifdef __STDC__
+tuiDisplayDataFrom (
+		     int elementNo,
+		     int reuseWindows)
+#else
+tuiDisplayDataFrom (elementNo, reuseWindows)
+     int elementNo;
+     int reuseWindows;
+#endif
+{
+  int firstLine = (-1);
+
+  if (elementNo < dataWin->detail.dataDisplayInfo.regsContentCount)
+    firstLine = tuiLineFromRegElementNo (elementNo);
+  else
+    {				/* calculate the firstLine from the element number */
+    }
+
+  if (firstLine >= 0)
+    {
+      tuiEraseDataContent ((char *) NULL);
+      if (!reuseWindows)
+	tuiDeleteDataContentWindows ();
+      tuiDisplayDataFromLine (firstLine);
+    }
+
+  return;
+}				/* tuiDisplayDataFrom */
+
+
+/*
+** tuiRefreshDataWin()
+**        Function to redisplay the contents of the data window.
+*/
+void
+#ifdef __STDC__
+tuiRefreshDataWin (void)
+#else
+tuiRefreshDataWin ()
+#endif
+{
+  tuiEraseDataContent ((char *) NULL);
+  if (dataWin->generic.contentSize > 0)
+    {
+      int firstElement = tuiFirstDataItemDisplayed ();
+
+      if (firstElement >= 0)	/* re-use existing windows */
+	tuiDisplayDataFrom (firstElement, TRUE);
+    }
+
+  return;
+}				/* tuiRefreshDataWin */
+
+
+/*
+** tuiCheckDataValues().
+**        Function to check the data values and hilite any that have changed
+*/
+void
+#ifdef __STDC__
+tuiCheckDataValues (
+		     struct frame_info *frame)
+#else
+tuiCheckDataValues (frame)
+     struct frame_info *frame;
+#endif
+{
+  tuiCheckRegisterValues (frame);
+
+  /* Now check any other data values that there are */
+  if (m_winPtrNotNull (dataWin) && dataWin->generic.isVisible)
+    {
+      int i;
+
+      for (i = 0; dataWin->detail.dataDisplayInfo.dataContentCount; i++)
+	{
+#ifdef LATER
+	  TuiDataElementPtr dataElementPtr;
+	  TuiGenWinInfoPtr dataItemWinPtr;
+	  Opaque newValue;
+
+	  dataItemPtr = &dataWin->detail.dataDisplayInfo.
+	    dataContent[i]->whichElement.dataWindow;
+	  dataElementPtr = &((TuiWinContent)
+			     dataItemWinPtr->content)[0]->whichElement.data;
+	  if value
+	    has changed (dataElementPtr, frame, &newValue)
+	    {
+	      dataElementPtr->value = newValue;
+	      update the display with the new value, hiliting it.
+	    }
+#endif
+	}
+    }
+}				/* tuiCheckDataValues */
+
+
+/*
+** tui_vCheckDataValues().
+**        Function to check the data values and hilite any that have
+**        changed with args in a va_list
+*/
+void
+#ifdef __STDC__
+tui_vCheckDataValues (
+		       va_list args)
+#else
+tui_vCheckDataValues (args)
+     va_list args;
+#endif
+{
+  struct frame_info *frame = va_arg (args, struct frame_info *);
+
+  tuiCheckDataValues (frame);
+
+  return;
+}				/* tui_vCheckDataValues */
+
+
+/*
+** tuiVerticalDataScroll()
+**        Scroll the data window vertically forward or backward.
+*/
+void
+#ifdef __STDC__
+tuiVerticalDataScroll (
+			TuiScrollDirection scrollDirection,
+			int numToScroll)
+#else
+tuiVerticalDataScroll (scrollDirection, numToScroll)
+     TuiScrollDirection scrollDirection;
+     int numToScroll;
+#endif
+{
+  int firstElementNo;
+  int firstLine = (-1);
+
+  firstElementNo = tuiFirstDataItemDisplayed ();
+  if (firstElementNo < dataWin->detail.dataDisplayInfo.regsContentCount)
+    firstLine = tuiLineFromRegElementNo (firstElementNo);
+  else
+    {				/* calculate the first line from the element number which is in
+        ** the general data content
+        */
+    }
+
+  if (firstLine >= 0)
+    {
+      int lastElementNo, lastLine;
+
+      if (scrollDirection == FORWARD_SCROLL)
+	firstLine += numToScroll;
+      else
+	firstLine -= numToScroll;
+      tuiEraseDataContent ((char *) NULL);
+      tuiDeleteDataContentWindows ();
+      tuiDisplayDataFromLine (firstLine);
+    }
+
+  return;
+}				/* tuiVerticalDataScroll */
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS               **
+******************************************/
diff --git a/gdb/tui/tuiDataWin.h b/gdb/tui/tuiDataWin.h
new file mode 100644
index 0000000..8f9e46d
--- /dev/null
+++ b/gdb/tui/tuiDataWin.h
@@ -0,0 +1,29 @@
+#ifndef _TUI_DATAWIN_H
+#define _TUI_DATAWIN_H
+/*
+** This header file supports the display of registers/data in the data window.
+*/
+
+
+/*****************************************
+** TYPE DEFINITIONS                        **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTION EXTERNAL DECLS        **
+******************************************/
+extern void     tuiEraseDataContent PARAMS ((char *));
+extern void     tuiDisplayAllData PARAMS ((void));
+extern void     tuiCheckDataValues PARAMS ((struct frame_info *));
+extern void     tui_vCheckDataValues PARAMS ((va_list));
+extern void     tuiDisplayDataFromLine PARAMS ((int));
+extern int      tuiFirstDataItemDisplayed PARAMS ((void));
+extern int      tuiFirstDataElementNoInLine PARAMS ((int));
+extern void     tuiDeleteDataContentWindows PARAMS ((void));
+extern void     tuiRefreshDataWin PARAMS ((void));
+extern void     tuiDisplayDataFrom PARAMS ((int, int));
+extern void     tuiVerticalDataScroll PARAMS ((TuiScrollDirection, int));
+
+#endif /*_TUI_DATAWIN_H*/
diff --git a/gdb/tui/tuiDisassem.c b/gdb/tui/tuiDisassem.c
new file mode 100644
index 0000000..ad0b70f
--- /dev/null
+++ b/gdb/tui/tuiDisassem.c
@@ -0,0 +1,343 @@
+/*
+** tuiDisassem.c
+**         This module contains functions for handling disassembly display.
+*/
+
+
+#include "defs.h"
+#include "symtab.h"
+#include "breakpoint.h"
+#include "frame.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiLayout.h"
+#include "tuiSourceWin.h"
+#include "tuiStack.h"
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+static struct breakpoint *_hasBreak PARAMS ((CORE_ADDR));
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                        **
+******************************************/
+
+/*
+** tuiSetDisassemContent().
+**        Function to set the disassembly window's content.
+*/
+TuiStatus
+#ifdef __STDC__
+tuiSetDisassemContent (
+		       struct symtab *s,
+		       Opaque startAddr)
+#else
+     tuiSetDisassemContent (s, startAddr)
+     struct symtab *s;
+     Opaque startAddr;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  GDB_FILE *gdb_dis_out;
+
+  if (startAddr != (Opaque) NULL)
+    {
+      register int i, desc;
+
+      if ((ret = tuiAllocSourceBuffer (disassemWin)) == TUI_SUCCESS)
+	{
+	  register int offset = disassemWin->detail.sourceInfo.horizontalOffset;
+	  register int threshold, curLine = 0, lineWidth, maxLines;
+	  CORE_ADDR newpc, pc;
+	  disassemble_info asmInfo;
+	  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+	  extern void strcat_address PARAMS ((CORE_ADDR, char *, int));
+	  extern void strcat_address_numeric PARAMS ((CORE_ADDR, int, char *, int));
+	  int curLen = 0;
+	  int tab_len = tuiDefaultTabLen ();
+
+	  maxLines = disassemWin->generic.height - 2;	/* account for hilite */
+	  lineWidth = disassemWin->generic.width - 1;
+	  threshold = (lineWidth - 1) + offset;
+
+	  /* now init the gdb_file structure */
+          gdb_dis_out = gdb_file_init_astring (threshold);
+
+	  INIT_DISASSEMBLE_INFO_NO_ARCH (asmInfo, gdb_dis_out, (fprintf_ftype) fprintf_filtered);
+	  asmInfo.read_memory_func = dis_asm_read_memory;
+	  asmInfo.memory_error_func = dis_asm_memory_error;
+
+	  disassemWin->detail.sourceInfo.startLineOrAddr.addr = startAddr;
+
+	  /* Now construct each line */
+	  for (curLine = 0, pc = (CORE_ADDR) startAddr; (curLine < maxLines);)
+	    {
+	      TuiWinElementPtr element = (TuiWinElementPtr)disassemWin->generic.content[curLine];
+	      struct breakpoint *bp;
+
+	      print_address (pc, gdb_dis_out);
+
+	      curLen = strlen (gdb_file_get_strbuf (gdb_dis_out));
+	      i = curLen - ((curLen / tab_len) * tab_len);
+
+              /* adjust buffer length if necessary */
+	      gdb_file_adjust_strbuf ((tab_len - i > 0) ? (tab_len - i ) : 0, gdb_dis_out);
+		
+	      /* Add spaces to make the instructions start onthe same column */
+	      while (i < tab_len)
+		{
+		  gdb_file_get_strbuf (gdb_dis_out)[curLen] = ' ';
+		  i++;
+		  curLen++;
+		}
+	      gdb_file_get_strbuf (gdb_dis_out)[curLen] = '\0';
+
+	      newpc = pc + ((*tm_print_insn) (pc, &asmInfo));
+
+	      /* Now copy the line taking the offset into account */
+	      if (strlen (gdb_file_get_strbuf (gdb_dis_out)) > offset)
+		strcpy (element->whichElement.source.line,
+			&(gdb_file_get_strbuf (gdb_dis_out)[offset]));
+	      else
+		element->whichElement.source.line[0] = '\0';
+	      element->whichElement.source.lineOrAddr.addr = (Opaque) pc;
+	      element->whichElement.source.isExecPoint =
+		(pc == (CORE_ADDR) ((TuiWinElementPtr)locator->content[0])->whichElement.locator.addr);
+	      bp = _hasBreak (pc);
+	      element->whichElement.source.hasBreak =
+		(bp != (struct breakpoint *) NULL &&
+		 (!element->whichElement.source.isExecPoint ||
+		  (bp->disposition != del || bp->hit_count <= 0)));
+	      curLine++;
+	      pc = newpc;
+              /* reset the buffer to empty */
+	      gdb_file_get_strbuf (gdb_dis_out)[0] = '\0';
+	    }
+	  gdb_file_deallocate (&gdb_dis_out);
+	  disassemWin->generic.contentSize = curLine;
+	  ret = TUI_SUCCESS;
+	}
+    }
+
+  return ret;
+}				/* tuiSetDisassemContent */
+
+
+/*
+** tuiShowDisassem().
+**        Function to display the disassembly window with disassembled code.
+*/
+void
+#ifdef __STDC__
+tuiShowDisassem (
+		  Opaque startAddr)
+#else
+tuiShowDisassem (startAddr)
+     Opaque startAddr;
+#endif
+{
+  struct symtab *s = find_pc_symtab ((CORE_ADDR) startAddr);
+  TuiWinInfoPtr winWithFocus = tuiWinWithFocus ();
+
+  tuiAddWinToLayout (DISASSEM_WIN);
+  tuiUpdateSourceWindow (disassemWin, s, startAddr, FALSE);
+  /*
+    ** if the focus was in the src win, put it in the asm win, if the
+    ** source view isn't split
+    */
+  if (currentLayout () != SRC_DISASSEM_COMMAND && winWithFocus == srcWin)
+    tuiSetWinFocusTo (disassemWin);
+
+  return;
+}				/* tuiShowDisassem */
+
+
+/*
+** tuiShowDisassemAndUpdateSource().
+**        Function to display the disassembly window.
+*/
+void
+#ifdef __STDC__
+tuiShowDisassemAndUpdateSource (
+				 Opaque startAddr)
+#else
+tuiShowDisassemAndUpdateSource (startAddr)
+     Opaque startAddr;
+#endif
+{
+  struct symtab_and_line sal;
+
+  tuiShowDisassem (startAddr);
+  if (currentLayout () == SRC_DISASSEM_COMMAND)
+    {
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+      /*
+        ** Update what is in the source window if it is displayed too,
+        ** note that it follows what is in the disassembly window and visa-versa
+        */
+      sal = find_pc_line ((CORE_ADDR) startAddr, 0);
+      current_source_symtab = sal.symtab;
+      tuiUpdateSourceWindow (srcWin, sal.symtab, (Opaque) sal.line, TRUE);
+      tuiUpdateLocatorFilename (sal.symtab->filename);
+    }
+
+  return;
+}				/* tuiShowDisassemAndUpdateSource */
+
+
+/*
+** tuiShowDisassemAsIs().
+**        Function to display the disassembly window.  This function shows
+**        the disassembly as specified by the horizontal offset.
+*/
+void
+#ifdef __STDC__
+tuiShowDisassemAsIs (
+		      Opaque addr)
+#else
+tuiShowDisassemAsIs (addr)
+     Opaque addr;
+#endif
+{
+  tuiAddWinToLayout (DISASSEM_WIN);
+  tuiUpdateSourceWindowAsIs (disassemWin, (struct symtab *) NULL, addr, FALSE);
+  /*
+    ** Update what is in the source window if it is displayed too, not that it
+    ** follows what is in the disassembly window and visa-versa
+    */
+  if (currentLayout () == SRC_DISASSEM_COMMAND)
+    tuiShowSourceContent (srcWin);	/*????  Need to do more? */
+
+  return;
+}				/* tuiShowDisassem */
+
+
+/*
+** tuiGetBeginAsmAddress().
+*/
+Opaque
+#ifdef __STDC__
+tuiGetBeginAsmAddress (void)
+#else
+tuiGetBeginAsmAddress ()
+#endif
+{
+  TuiGenWinInfoPtr locator;
+  TuiLocatorElementPtr element;
+  Opaque addr;
+
+  locator = locatorWinInfoPtr ();
+  element = &((TuiWinElementPtr) locator->content[0])->whichElement.locator;
+
+  if (element->addr == (Opaque) 0)
+    {
+      /*the target is not executing, because the pc is 0*/
+
+      addr = (Opaque) parse_and_eval_address ("main");
+
+      if (addr == (Opaque) 0)
+	addr = (Opaque) parse_and_eval_address ("MAIN");
+
+    }
+  else				/* the target is executing */
+    addr = element->addr;
+
+  return addr;
+}				/* tuiGetBeginAsmAddress */
+
+
+/*
+** tuiVerticalDisassemScroll().
+**      Scroll the disassembly forward or backward vertically
+*/
+void
+#ifdef __STDC__
+tuiVerticalDisassemScroll (
+			    TuiScrollDirection scrollDirection,
+			    int numToScroll)
+#else
+tuiVerticalDisassemScroll (scrollDirection, numToScroll)
+     TuiScrollDirection scrollDirection;
+     int numToScroll;
+#endif
+{
+  if (disassemWin->generic.content != (OpaquePtr) NULL)
+    {
+      Opaque pc, lowAddr;
+      TuiWinContent content;
+      struct symtab *s;
+
+      content = (TuiWinContent) disassemWin->generic.content;
+      if (current_source_symtab == (struct symtab *) NULL)
+	s = find_pc_symtab (selected_frame->pc);
+      else
+	s = current_source_symtab;
+
+      pc = content[0]->whichElement.source.lineOrAddr.addr;
+      if (find_pc_partial_function ((CORE_ADDR) pc,
+				    (char **) NULL,
+				    (CORE_ADDR *) & lowAddr,
+				    (CORE_ADDR) NULL) == 0)
+	error ("No function contains prgram counter for selected frame.\n");
+      else
+	{
+	  register int line = 0;
+	  register Opaque newLow;
+	  bfd_byte buffer[4];
+
+	  newLow = pc;
+	  if (scrollDirection == FORWARD_SCROLL)
+	    {
+	      for (; line < numToScroll; line++)
+		newLow += sizeof (bfd_getb32 (buffer));
+	    }
+	  else
+	    {
+	      for (; newLow >= (Opaque) 0 && line < numToScroll; line++)
+		newLow -= sizeof (bfd_getb32 (buffer));
+	    }
+	  tuiUpdateSourceWindowAsIs (disassemWin, s, newLow, FALSE);
+	}
+    }
+
+  return;
+}				/* tuiVerticalDisassemScroll */
+
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS                 **
+******************************************/
+/*
+** _hasBreak().
+**      Answer whether there is a break point at the input line in the
+**      source file indicated
+*/
+static struct breakpoint *
+#ifdef __STDC__
+_hasBreak (
+	    CORE_ADDR addr)
+#else
+_hasBreak (addr)
+     CORE_ADDR addr;
+#endif
+{
+  struct breakpoint *bpWithBreak = (struct breakpoint *) NULL;
+  struct breakpoint *bp;
+  extern struct breakpoint *breakpoint_chain;
+
+
+  for (bp = breakpoint_chain;
+       (bp != (struct breakpoint *) NULL &&
+	bpWithBreak == (struct breakpoint *) NULL);
+       bp = bp->next)
+    if (addr == bp->address)
+      bpWithBreak = bp;
+
+  return bpWithBreak;
+}				/* _hasBreak */
diff --git a/gdb/tui/tuiDisassem.h b/gdb/tui/tuiDisassem.h
new file mode 100644
index 0000000..711ac48
--- /dev/null
+++ b/gdb/tui/tuiDisassem.h
@@ -0,0 +1,22 @@
+#ifndef _TUI_DISASSEM_H
+#define _TUI_DISASSEM_H
+/*
+** This header file supports
+*/
+
+/*****************************************
+** TYPE DEFINITIONS                        **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTION EXTERNAL DECLS        **
+******************************************/
+extern TuiStatus        tuiSetDisassemContent PARAMS ((struct symtab *, Opaque));
+extern void             tuiShowDisassem PARAMS ((Opaque));
+extern void             tuiShowDisassemAndUpdateSource PARAMS ((Opaque));
+extern void             tuiVerticalDisassemScroll PARAMS ((TuiScrollDirection, int));
+extern Opaque           tuiGetBeginAsmAddress PARAMS ((void));
+
+#endif /*_TUI_DISASSEM_H*/
diff --git a/gdb/tui/tuiGeneralWin.c b/gdb/tui/tuiGeneralWin.c
new file mode 100644
index 0000000..5af0cd7
--- /dev/null
+++ b/gdb/tui/tuiGeneralWin.c
@@ -0,0 +1,469 @@
+/*
+** TuiGeneralWin.c
+** This module supports general window behavior
+*/
+
+#include <curses.h>
+#include "defs.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiGeneralWin.h"
+
+
+/*
+** local support functions
+*/
+static void _winResize PARAMS ((void));
+
+
+/***********************
+** PUBLIC FUNCTIONS
+***********************/
+/*
+** tuiRefreshWin()
+**        Refresh the window
+*/
+void
+#ifdef __STDC__
+tuiRefreshWin (
+		TuiGenWinInfoPtr winInfo)
+#else
+tuiRefreshWin (winInfo)
+     TuiGenWinInfoPtr winInfo;
+#endif
+{
+  if (winInfo->type == DATA_WIN && winInfo->contentSize > 0)
+    {
+      int i;
+
+      for (i = 0; (i < winInfo->contentSize); i++)
+	{
+	  TuiGenWinInfoPtr dataItemWinPtr;
+
+	  dataItemWinPtr = &((TuiWinContent)
+			     winInfo->content)[i]->whichElement.dataWindow;
+	  if (m_genWinPtrNotNull (dataItemWinPtr) &&
+	      dataItemWinPtr->handle != (WINDOW *) NULL)
+	    wrefresh (dataItemWinPtr->handle);
+	}
+    }
+  else if (winInfo->type == CMD_WIN)
+    {
+      /* Do nothing */
+    }
+  else
+    {
+      if (winInfo->handle != (WINDOW *) NULL)
+	wrefresh (winInfo->handle);
+    }
+
+  return;
+}				/* tuiRefreshWin */
+
+
+/*
+** tuiDelwin()
+**        Function to delete the curses window, checking for null
+*/
+void
+#ifdef __STDC__
+tuiDelwin (
+	    WINDOW * window)
+#else
+tuiDelwin (window)
+     WINDOW *window;
+#endif
+{
+  if (window != (WINDOW *) NULL)
+    delwin (window);
+
+  return;
+}				/* tuiDelwin */
+
+
+/*
+** boxWin().
+*/
+void
+#ifdef __STDC__
+boxWin (
+	 TuiGenWinInfoPtr winInfo,
+	 int highlightFlag)
+#else
+boxWin (winInfo, highlightFlag)
+     TuiGenWinInfoPtr winInfo;
+     int highlightFlag;
+#endif
+{
+  if (m_genWinPtrNotNull (winInfo) && winInfo->handle != (WINDOW *) NULL)
+    {
+      if (highlightFlag == HILITE)
+	box (winInfo->handle, '|', '-');
+      else
+	{
+/*            wattron(winInfo->handle, A_DIM);*/
+	  box (winInfo->handle, ':', '.');
+/*            wattroff(winInfo->handle, A_DIM);*/
+	}
+    }
+
+  return;
+}				/* boxWin */
+
+
+/*
+** unhighlightWin().
+*/
+void
+#ifdef __STDC__
+unhighlightWin (
+		 TuiWinInfoPtr winInfo)
+#else
+unhighlightWin (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo) && winInfo->generic.handle != (WINDOW *) NULL)
+    {
+      boxWin ((TuiGenWinInfoPtr) winInfo, NO_HILITE);
+      wrefresh (winInfo->generic.handle);
+      m_setWinHighlightOff (winInfo);
+    }
+}				/* unhighlightWin */
+
+
+/*
+** highlightWin().
+*/
+void
+#ifdef __STDC__
+highlightWin (
+	       TuiWinInfoPtr winInfo)
+#else
+highlightWin (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo) &&
+      winInfo->canHighlight && winInfo->generic.handle != (WINDOW *) NULL)
+    {
+      boxWin ((TuiGenWinInfoPtr) winInfo, HILITE);
+      wrefresh (winInfo->generic.handle);
+      m_setWinHighlightOn (winInfo);
+    }
+}				/* highlightWin */
+
+
+/*
+** checkAndDisplayHighlightIfNecessay
+*/
+void
+#ifdef __STDC__
+checkAndDisplayHighlightIfNeeded (
+				   TuiWinInfoPtr winInfo)
+#else
+checkAndDisplayHighlightIfNeeded (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo) && winInfo->generic.type != CMD_WIN)
+    {
+      if (winInfo->isHighlighted)
+	highlightWin (winInfo);
+      else
+	unhighlightWin (winInfo);
+
+    }
+  return;
+}				/* checkAndDisplayHighlightIfNeeded */
+
+
+/*
+** makeWindow().
+*/
+void
+#ifdef __STDC__
+makeWindow (
+	     TuiGenWinInfoPtr winInfo,
+	     int boxIt)
+#else
+makeWindow (winInfo, boxIt)
+     TuiGenWinInfoPtr winInfo;
+     int boxIt;
+#endif
+{
+  WINDOW *handle;
+
+  handle = newwin (winInfo->height,
+		   winInfo->width,
+		   winInfo->origin.y,
+		   winInfo->origin.x);
+  winInfo->handle = handle;
+  if (handle != (WINDOW *) NULL)
+    {
+      if (boxIt == BOX_WINDOW)
+	boxWin (winInfo, NO_HILITE);
+      winInfo->isVisible = TRUE;
+      scrollok (handle, TRUE);
+      tuiRefreshWin (winInfo);
+
+#ifndef FOR_TEST
+      if (			/*!m_WinIsAuxillary(winInfo->type) && */
+	   (winInfo->type != CMD_WIN) &&
+	   (winInfo->content == (OpaquePtr) NULL))
+	{
+	  mvwaddstr (handle, 1, 1, winName (winInfo));
+	  tuiRefreshWin (winInfo);
+	}
+#endif /*FOR_TEST*/
+    }
+
+  return;
+}				/* makeWindow */
+
+
+/*
+** tuiClearWin().
+**        Clear the window of all contents without calling wclear.
+*/
+void
+#ifdef __STDC__
+tuiClearWin (
+	      TuiGenWinInfoPtr winInfo)
+#else
+tuiClearWin (winInfo)
+     TuiGenWinInfoPtr winInfo;
+#endif
+{
+  if (m_genWinPtrNotNull (winInfo) && winInfo->handle != (WINDOW *) NULL)
+    {
+      int curRow, curCol;
+
+      for (curRow = 0; (curRow < winInfo->height); curRow++)
+	for (curCol = 0; (curCol < winInfo->width); curCol++)
+	  mvwaddch (winInfo->handle, curRow, curCol, ' ');
+
+      tuiRefreshWin (winInfo);
+    }
+
+  return;
+}				/* tuiClearWin */
+
+
+/*
+** makeVisible().
+**        We can't really make windows visible, or invisible.  So we
+**        have to delete the entire window when making it visible,
+**        and create it again when making it visible.
+*/
+void
+#ifdef __STDC__
+makeVisible (
+	      TuiGenWinInfoPtr winInfo,
+	      int visible)
+#else
+makeVisible (winInfo, visible)
+     TuiGenWinInfoPtr winInfo;
+     int visible;
+#endif
+{
+  /* Don't tear down/recreate command window */
+  if (winInfo->type == CMD_WIN)
+    return;
+
+  if (visible)
+    {
+      if (!winInfo->isVisible)
+	{
+	  makeWindow (
+		       winInfo,
+	   (winInfo->type != CMD_WIN && !m_winIsAuxillary (winInfo->type)));
+	  winInfo->isVisible = TRUE;
+	}
+      tuiRefreshWin (winInfo);
+    }
+  else if (!visible &&
+	   winInfo->isVisible && winInfo->handle != (WINDOW *) NULL)
+    {
+      winInfo->isVisible = FALSE;
+      tuiClearWin (winInfo);
+      tuiDelwin (winInfo->handle);
+      winInfo->handle = (WINDOW *) NULL;
+    }
+
+  return;
+}				/* makeVisible */
+
+
+/*
+** makeAllVisible().
+**        Makes all windows invisible (except the command and locator windows)
+*/
+void
+#ifdef __STDC__
+makeAllVisible (
+		 int visible)
+#else
+makeAllVisible (visible)
+     int visible;
+#endif
+{
+  int i;
+
+  for (i = 0; i < MAX_MAJOR_WINDOWS; i++)
+    {
+      if (m_winPtrNotNull (winList[i]) &&
+	  ((winList[i])->generic.type) != CMD_WIN)
+	{
+	  if (m_winIsSourceType ((winList[i])->generic.type))
+	    makeVisible ((winList[i])->detail.sourceInfo.executionInfo,
+			 visible);
+	  makeVisible ((TuiGenWinInfoPtr) winList[i], visible);
+	}
+    }
+
+  return;
+}				/* makeAllVisible */
+
+
+/*
+** scrollWinForward
+*/
+void
+#ifdef __STDC__
+scrollWinForward (
+		   TuiGenWinInfoPtr winInfo,
+		   int numLines)
+#else
+scrollWinForward (winInfo, numLines)
+     TuiGenWinInfoPtr winInfo;
+     int numLines;
+#endif
+{
+  if (winInfo->content != (OpaquePtr) NULL &&
+      winInfo->lastVisibleLine < winInfo->contentSize - 1)
+    {
+      int i, firstLine, newLastLine;
+
+      firstLine = winInfo->lastVisibleLine - winInfo->viewportHeight + 1;
+      if (winInfo->lastVisibleLine + numLines > winInfo->contentSize)
+	newLastLine = winInfo->contentSize - 1;
+      else
+	newLastLine = winInfo->lastVisibleLine + numLines - 1;
+
+      for (i = (newLastLine - winInfo->viewportHeight);
+	   (i <= newLastLine); i++)
+	{
+	  TuiWinElementPtr line;
+	  int lineHeight;
+
+	  line = (TuiWinElementPtr) winInfo->content[i];
+	  if (line->highlight)
+	    wstandout (winInfo->handle);
+	  mvwaddstr (winInfo->handle,
+		     i - (newLastLine - winInfo->viewportHeight),
+		     1,
+		     displayableWinContentOf (winInfo, line));
+	  if (line->highlight)
+	    wstandend (winInfo->handle);
+	  lineHeight = winElementHeight (winInfo, line);
+	  newLastLine += (lineHeight - 1);
+	}
+      winInfo->lastVisibleLine = newLastLine;
+    }
+
+  return;
+}				/* scrollWinForward */
+
+
+/*
+** scrollWinBackward
+*/
+void
+#ifdef __STDC__
+scrollWinBackward (
+		    TuiGenWinInfoPtr winInfo,
+		    int numLines)
+#else
+scrollWinBackward (winInfo, numLines)
+     TuiGenWinInfoPtr winInfo;
+     int numLines;
+#endif
+{
+  if (winInfo->content != (OpaquePtr) NULL &&
+      (winInfo->lastVisibleLine - winInfo->viewportHeight) > 0)
+    {
+      int i, newLastLine, firstLine;
+
+      firstLine = winInfo->lastVisibleLine - winInfo->viewportHeight + 1;
+      if ((firstLine - numLines) < 0)
+	newLastLine = winInfo->viewportHeight - 1;
+      else
+	newLastLine = winInfo->lastVisibleLine - numLines + 1;
+
+      for (i = newLastLine - winInfo->viewportHeight; (i <= newLastLine); i++)
+	{
+	  TuiWinElementPtr line;
+	  int lineHeight;
+
+	  line = (TuiWinElementPtr) winInfo->content[i];
+	  if (line->highlight)
+	    wstandout (winInfo->handle);
+	  mvwaddstr (winInfo->handle,
+		     i - (newLastLine - winInfo->viewportHeight),
+		     1,
+		     displayableWinContentOf (winInfo, line));
+	  if (line->highlight)
+	    wstandend (winInfo->handle);
+	  lineHeight = winElementHeight (winInfo, line);
+	  newLastLine += (lineHeight - 1);
+	}
+      winInfo->lastVisibleLine = newLastLine;
+    }
+
+  return;
+}				/* scrollWinBackward */
+
+
+/*
+** refreshAll().
+**        Function to refresh all the windows currently displayed
+*/
+void
+#ifdef __STDC__
+refreshAll (
+	     TuiWinInfoPtr * list)
+#else
+refreshAll (list)
+     TuiWinInfoPtr *list;
+#endif
+{
+  TuiWinType type;
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+  for (type = SRC_WIN; (type < MAX_MAJOR_WINDOWS); type++)
+    {
+      if (list[type]->generic.isVisible)
+	{
+	  if (type == SRC_WIN || type == DISASSEM_WIN)
+	    {
+	      touchwin (list[type]->detail.sourceInfo.executionInfo->handle);
+	      tuiRefreshWin (list[type]->detail.sourceInfo.executionInfo);
+	    }
+	  touchwin (list[type]->generic.handle);
+	  tuiRefreshWin (&list[type]->generic);
+	}
+    }
+  if (locator->isVisible)
+    {
+      touchwin (locator->handle);
+      tuiRefreshWin (locator);
+    }
+
+  return;
+}				/* refreshAll */
+
+
+/*********************************
+** Local Static Functions
+*********************************/
diff --git a/gdb/tui/tuiGeneralWin.h b/gdb/tui/tuiGeneralWin.h
new file mode 100644
index 0000000..559f8ab
--- /dev/null
+++ b/gdb/tui/tuiGeneralWin.h
@@ -0,0 +1,31 @@
+#ifndef TUI_GENERAL_WIN_H
+#define TUI_GENERAL_WIN_H
+
+/*
+** Functions
+*/
+extern void             tuiClearWin PARAMS ((TuiGenWinInfoPtr));
+extern void             unhighlightWin PARAMS ((TuiWinInfoPtr));
+extern void             makeVisible PARAMS ((TuiGenWinInfoPtr, int));
+extern void             makeAllVisible PARAMS ((int));
+extern void             scrollWinForward PARAMS ((TuiGenWinInfoPtr, int));
+extern void             scrollWinBackward PARAMS ((TuiGenWinInfoPtr, int));
+extern void             makeWindow PARAMS ((TuiGenWinInfoPtr, int));
+extern TuiWinInfoPtr    copyWin PARAMS ((TuiWinInfoPtr));
+extern void             boxWin PARAMS ((TuiGenWinInfoPtr, int));
+extern void             highlightWin PARAMS ((TuiWinInfoPtr));
+extern void             checkAndDisplayHighlightIfNeeded PARAMS ((TuiWinInfoPtr));
+extern void             refreshAll PARAMS ((TuiWinInfoPtr *));
+extern void             tuiDelwin PARAMS ((WINDOW  *window));
+extern void             tuiRefreshWin PARAMS ((TuiGenWinInfoPtr));
+
+/*
+** Macros
+*/
+#define    m_beVisible(winInfo)   makeVisible((TuiGenWinInfoPtr)(winInfo), TRUE)
+#define    m_beInvisible(winInfo) \
+                            makeVisible((TuiGenWinInfoPtr)(winInfo), FALSE)
+#define    m_allBeVisible()       makeAllVisible(TRUE)
+#define m_allBeInvisible()        makeAllVisible(FALSE)
+
+#endif /*TUI_GENERAL_WIN_H*/
diff --git a/gdb/tui/tuiIO.c b/gdb/tui/tuiIO.c
new file mode 100644
index 0000000..29a3613
--- /dev/null
+++ b/gdb/tui/tuiIO.c
@@ -0,0 +1,734 @@
+
+/*
+** This module contains functions to support i/o in the TUI
+*/
+
+
+#include <stdio.h>
+#include "defs.h"
+#include "terminal.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiIO.h"
+#include "tuiCommand.h"
+#include "tuiWin.h"
+
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
+#include <varargs.h>
+#endif
+
+/* The Solaris header files seem to provide no declaration for this at
+   all when __STDC__ is defined.  This shouldn't conflict with
+   anything.  */
+extern char *tgoto ();
+
+int insert_mode = 0;
+
+/********************************************
+**       LOCAL STATIC FORWARD DECLS        **
+********************************************/
+static void _updateCommandInfo PARAMS ((int));
+static unsigned int _tuiHandleResizeDuringIO PARAMS ((unsigned int));
+
+
+/*********************************************************************************
+**                              PUBLIC FUNCTIONS                                **
+*********************************************************************************/
+
+/*
+** tuiPuts_unfiltered().
+**        Function to put a string to the command window
+**              When running in TUI mode, this is the "hook"
+**              for fputs_unfiltered(). That is, all debugger
+**              output eventually makes it's way to the bottom-level
+**              routine fputs_unfiltered (main.c), which (in TUI
+**              mode), calls tuiPuts_unfiltered().
+*/
+void
+#ifdef __STDC__
+tuiPuts_unfiltered (
+		     const char *string,
+		     GDB_FILE * stream)
+#else
+tuiPuts_unfiltered (string, stream)
+     char *string;
+     GDB_FILE *stream;
+#endif
+{
+  int len = strlen (string);
+  int i, linech;
+
+  for (i = 0; i < len; i++)
+    {
+      if (string[i] == '\n' || string[i] == '\r')
+	m_tuiStartNewLine;
+      else
+	{
+	  if ((cmdWin->detail.commandInfo.curch + 1) > cmdWin->generic.width)
+	    m_tuiStartNewLine;
+
+	  if (insert_mode)
+	    {
+	      mvwinsch (cmdWin->generic.handle,
+			cmdWin->detail.commandInfo.curLine,
+			cmdWin->detail.commandInfo.curch++,
+			string[i]);
+	      wmove (cmdWin->generic.handle,
+		     cmdWin->detail.commandInfo.curLine,
+		     cmdWin->detail.commandInfo.curch);
+	    }
+	  else
+	    mvwaddch (cmdWin->generic.handle,
+		      cmdWin->detail.commandInfo.curLine,
+		      cmdWin->detail.commandInfo.curch++,
+		      string[i]);
+	}
+    }
+  tuiRefreshWin (&cmdWin->generic);
+
+  return;
+}				/* tuiPuts_unfiltered */
+
+/* A cover routine for tputs().
+ * tputs() is called from the readline package to put
+ * out strings representing cursor positioning.
+ * In TUI mode (non-XDB-style), tui_tputs() is called instead.
+ *
+ * The reason we need to hook tputs() is:
+ * Since the output is going to curses and not to
+ * a raw terminal, we need to intercept these special
+ * sequences, and handle them them here.
+ *
+ * This function seems to be correctly handling all sequences
+ * aimed at hpterm's, but there is additional work to do
+ * for xterm's and dtterm's. I abandoned further work on this
+ * in favor of "XDB style". In "XDB style", the command region
+ * looks like terminal, not a curses window, and this routine
+ * is not called. - RT
+ */
+void
+tui_tputs (str, affcnt, putfunc)
+     char *str;
+     int affcnt;
+     int (*putfunc) PARAMS ((int));
+{
+  extern char *rl_prompt;	/* the prompt string */
+
+  /* This set of globals are defined and initialized
+   * by the readline package.
+   *
+   * Note we're assuming tui_tputs() is being called
+   * by the readline package. That's because we're recognizing
+   * that a given string is being passed by
+   * matching the string address against readline's
+   * term_<whatever> global. To make this more general,
+   * we'd have to actually recognize the termcap sequence
+   * inside the string (more work than I want to do). - RT
+   *
+   * We don't see or need to handle every one of these here;
+   * this is just the full list defined in readline/readline.c
+   */
+  extern char *term_backspace;
+  extern char *term_clreol;
+  extern char *term_clrpag;
+  extern char *term_cr;
+  extern char *term_dc;
+  extern char *term_ei;
+  extern char *term_goto;
+  extern char *term_ic;
+  extern char *term_im;
+  extern char *term_mm;
+  extern char *term_mo;
+  extern char *term_up;
+  extern char *term_scroll_region;
+  extern char *term_memory_lock;
+  extern char *term_memory_unlock;
+  extern char *term_cursor_move;
+  extern char *visible_bell;
+
+  /* Sanity check - if not TUI, just call tputs() */
+  if (!tui_version)
+    tputs (str, affcnt, putfunc);
+
+  /* The strings we special-case are handled first */
+
+  if (str == term_backspace)
+    {
+      /* Backspace. */
+
+      /* We see this on an emacs control-B.
+     * I.e., it's like the left-arrow key (not like the backspace key).
+     * The effect that readline wants when it transmits this
+     * character to us is simply to back up one character
+     * (but not to write a space over the old character).
+     */
+
+      _updateCommandInfo (-1);
+      wmove (cmdWin->generic.handle,
+	     cmdWin->detail.commandInfo.curLine,
+	     cmdWin->detail.commandInfo.curch);
+      wrefresh (cmdWin->generic.handle);
+
+    }
+  else if (str == term_clreol)
+    {
+
+      /* Clear to end of line. */
+      wclrtoeol (cmdWin->generic.handle);
+      wrefresh (cmdWin->generic.handle);
+
+    }
+  else if (str == term_cr)
+    {
+
+      /* Carriage return */
+      _updateCommandInfo (-cmdWin->detail.commandInfo.curch);
+      wmove (cmdWin->generic.handle,
+	     cmdWin->detail.commandInfo.curLine,
+	     0 /* readline will rewrite the prompt from 0 */ );
+      wrefresh (cmdWin->generic.handle);
+
+    }
+  else if (str == term_goto)
+    {
+
+      /* This is actually a tgoto() specifying a character position,
+     * followed by either a term_IC/term_DC which [I think] means
+     * insert/delete one character at that position.
+     * There are complications with this one - need to either
+     * extract the position from the string, or have a backdoor
+     * means of communicating it from ../readline/display.c.
+     * So this one is not yet implemented.
+     * Not doing it seems to have no ill effects on command-line-editing
+     * that I've noticed so far. - RT
+     */
+
+    }
+  else if (str == term_dc)
+    {
+
+      /* Delete character at current cursor position */
+      wdelch (cmdWin->generic.handle);
+      wrefresh (cmdWin->generic.handle);
+
+    }
+  else if (str == term_im)
+    {
+
+      /* Turn on insert mode. */
+      insert_mode = 1;
+
+    }
+  else if (str == term_ei)
+    {
+
+      /* Turn off insert mode. */
+      insert_mode = 0;
+
+      /* Strings we know about but don't handle
+   * specially here are just passed along to tputs().
+   *
+   * These are not handled because (as far as I can tell)
+   * they are not actually emitted by the readline package
+   * in the course of doing command-line editing. Some of them
+   * theoretically could be used in the future, in which case we'd
+   * need to handle them.
+   */
+    }
+  else if (str == term_ic ||	/* insert character */
+	   str == term_cursor_move ||	/* cursor move */
+	   str == term_clrpag ||/* clear page */
+	   str == term_mm ||	/* turn on meta key */
+	   str == term_mo ||	/* turn off meta key */
+	   str == term_up ||	/* up one line (not expected) */
+	   str == term_scroll_region ||	/* set scroll region */
+	   str == term_memory_lock ||	/* lock screen above cursor */
+	   str == term_memory_unlock ||	/* unlock screen above cursor */
+	   str == visible_bell)
+    {				/* flash screen */
+      tputs (str, affcnt, putfunc);
+    }
+  else
+    {				/* something else */
+      tputs (str, affcnt, putfunc);
+    }
+}				/* tui_tputs */
+
+
+/*
+** tui_vwgetch()
+**        Wrapper around wgetch with the window in a va_list
+*/
+unsigned int
+#ifdef __STDC__
+tui_vwgetch (va_list args)
+#else
+tui_vwgetch (args)
+     va_list args;
+#endif
+{
+  unsigned int ch;
+  WINDOW *window;
+
+  window = va_arg (args, WINDOW *);
+
+  return ((unsigned int) wgetch (window));
+}				/* tui_vwgetch */
+
+
+/*
+** tui_vread()
+**   Wrapper around read() with paramets in a va_list
+*/
+unsigned int
+#ifdef __STDC__
+tui_vread (va_list args)
+#else
+tui_vread (args)
+     va_list args;
+#endif
+{
+  int result = 0;
+  int filedes = va_arg (args, int);
+  char *buf = va_arg (args, char *);
+  int nbytes = va_arg (args, int);
+
+  result = read (filedes, buf, nbytes);
+
+  return result;
+}				/* tui_vread() */
+
+/*
+** tuiRead()
+**    Function to perform a read() catching resize events
+*/
+int
+#ifdef __STDC__
+tuiRead (
+	  int filedes,
+	  char *buf,
+	  int nbytes)
+#else
+tuiRead (filedes, buf, nbytes)
+     int filedes;
+     char *buf;
+     int nbytes;
+#endif
+{
+  int result = 0;
+
+  result = (int) vcatch_errors ((OpaqueFuncPtr) tui_vread, filedes, buf, nbytes);
+  *buf = _tuiHandleResizeDuringIO (*buf);
+
+  return result;
+}				/* tuiRead */
+
+
+/*
+** tuiGetc().
+**        Get a character from the command window.
+**		This is called from the readline package,
+**              that is, we have:
+**                tuiGetc() [here], called from
+**                readline code [in ../readline/], called from
+**                command_line_input() in top.c
+*/
+unsigned int
+#ifdef __STDC__
+tuiGetc (void)
+#else
+tuiGetc ()
+#endif
+{
+  unsigned int ch;
+  extern char *rl_prompt;
+  extern char *rl_line_buffer;
+  extern int rl_point;
+
+  /* Call the curses routine that reads one character */
+#ifndef COMMENT
+  ch = (unsigned int) vcatch_errors ((OpaqueFuncPtr) tui_vwgetch,
+				     cmdWin->generic.handle);
+#else
+  ch = wgetch (cmdWin->generic.handle);
+#endif
+  ch = _tuiHandleResizeDuringIO (ch);
+
+  if (m_isCommandChar (ch))
+    {				/* Handle prev/next/up/down here */
+      tuiTermSetup (0);
+      ch = tuiDispatchCtrlChar (ch);
+      cmdWin->detail.commandInfo.curch = strlen (rl_prompt) + rl_point;
+      tuiTermUnsetup (0, cmdWin->detail.commandInfo.curch);
+    }
+  if (ch == '\n' || ch == '\r' || ch == '\f')
+    cmdWin->detail.commandInfo.curch = 0;
+  else
+    tuiIncrCommandCharCountBy (1);
+
+  return ch;
+}				/* tuiGetc */
+
+
+/*
+** tuiBufferGetc().
+*/
+/*elz: this function reads a line of input from the user and
+puts it in a static buffer. Subsequent calls to this same function
+obtain one char at the time, providing the caller with a behavior
+similar to fgetc. When the input is buffered, the backspaces have
+the needed effect, i.e. ignore the last char active in the buffer*/
+/* so far this function is called only from the query function in
+utils.c*/
+
+unsigned int
+#ifdef __STDC__
+tuiBufferGetc (void)
+#else
+tuiBufferGetc ()
+#endif
+{
+  unsigned int ch;
+  static unsigned char _ibuffer[512];
+  static int index_read = -1;
+  static int length_of_answer = -1;
+  int pos = 0;
+
+  if (length_of_answer == -1)
+    {
+      /* this is the first time through, need to read the answer*/
+      do
+	{
+	  /* Call the curses routine that reads one character */
+	  ch = (unsigned int) wgetch (cmdWin->generic.handle);
+	  if (ch != '\b')
+	    {
+	      _ibuffer[pos] = ch;
+	      pos++;
+	    }
+	  else
+	    pos--;
+	}
+      while (ch != '\r' && ch != '\n');
+
+      length_of_answer = pos;
+      index_read = 0;
+    }
+
+  ch = _ibuffer[index_read];
+  index_read++;
+
+  if (index_read == length_of_answer)
+    {
+      /*this is the last time through, reset for next query*/
+      index_read = -1;
+      length_of_answer = -1;
+    }
+
+  wrefresh (cmdWin->generic.handle);
+
+  return (ch);
+}				/* tuiBufferGetc */
+
+
+/*
+** tuiStartNewLines().
+*/
+void
+#ifdef __STDC__
+tuiStartNewLines (
+		   int numLines)
+#else
+tuiStartNewLines (numLines)
+     int numLines;
+#endif
+{
+  if (numLines > 0)
+    {
+      if (cmdWin->generic.viewportHeight > 1 &&
+	cmdWin->detail.commandInfo.curLine < cmdWin->generic.viewportHeight)
+	cmdWin->detail.commandInfo.curLine += numLines;
+      else
+	scroll (cmdWin->generic.handle);
+      cmdWin->detail.commandInfo.curch = 0;
+      wmove (cmdWin->generic.handle,
+	     cmdWin->detail.commandInfo.curLine,
+	     cmdWin->detail.commandInfo.curch);
+      tuiRefreshWin (&cmdWin->generic);
+    }
+
+  return;
+}				/* tuiStartNewLines */
+
+
+/*
+** tui_vStartNewLines().
+**        With numLines in a va_list
+*/
+void
+#ifdef __STDC__
+tui_vStartNewLines (
+		     va_list args)
+#else
+tui_vStartNewLines (args)
+     va_list args;
+#endif
+{
+  int numLines = va_arg (args, int);
+
+  tuiStartNewLines (numLines);
+
+  return;
+}				/* tui_vStartNewLines */
+
+
+/****************************************************************************
+**                   LOCAL STATIC FUNCTIONS                                **
+*****************************************************************************/
+
+
+/*
+** _tuiHandleResizeDuringIO
+**    This function manages the cleanup when a resize has occured
+**    From within a call to getch() or read.  Returns the character
+**    to return from getc or read.
+*/
+static unsigned int
+#ifdef __STDC__
+_tuiHandleResizeDuringIO (
+			   unsigned int originalCh)	/* the char just read */
+#else
+_tuiHandleResizeDuringIO (originalCh)
+     unsigned int originalCh;
+#endif
+{
+  if (tuiWinResized ())
+    {
+      tuiDo ((TuiOpaqueFuncPtr) tuiRefreshAll);
+      dont_repeat ();
+      tuiSetWinResizedTo (FALSE);
+      rl_reset ();
+      return '\n';
+    }
+  else
+    return originalCh;
+}				/* _tuiHandleResizeDuringIO */
+
+
+/*
+** _updateCommandInfo().
+**        Function to update the command window information.
+*/
+static void
+#ifdef __STDC__
+_updateCommandInfo (
+		     int sizeOfString)
+#else
+_updateCommandInfo (sizeOfString)
+     int sizeOfString;
+#endif
+{
+
+  if ((sizeOfString +
+       cmdWin->detail.commandInfo.curch) > cmdWin->generic.width)
+    {
+      int newCurch = sizeOfString + cmdWin->detail.commandInfo.curch;
+
+      tuiStartNewLines (1);
+      cmdWin->detail.commandInfo.curch = newCurch - cmdWin->generic.width;
+    }
+  else
+    cmdWin->detail.commandInfo.curch += sizeOfString;
+
+  return;
+}				/* _updateCommandInfo */
+
+
+/* Looked at in main.c, fputs_unfiltered(), to decide
+ * if it's safe to do standard output to the command window.
+ */
+int tui_owns_terminal = 0;
+
+/* Called to set up the terminal for TUI (curses) I/O.
+ * We do this either on our way "in" to GDB after target
+ * program execution, or else within tuiDo just before
+ * going off to TUI routines.
+ */
+
+void
+#ifdef __STDC__
+tuiTermSetup (
+	       int turn_off_echo)
+#else
+tuiTermSetup (turn_off_echo)
+     int turn_off_echo;
+#endif
+{
+  char *buffer;
+  int start;
+  int end;
+  int endcol;
+  extern char *term_scroll_region;
+  extern char *term_cursor_move;
+  extern char *term_memory_lock;
+  extern char *term_memory_unlock;
+
+  /* Turn off echoing, since the TUI does not
+     * expect echoing. Below I only put in the TERMIOS
+     * case, since that is what applies on HP-UX. turn_off_echo
+     * is 1 except for the case where we're being called
+     * on a "quit", in which case we want to leave echo on.
+     */
+  if (turn_off_echo)
+    {
+#ifdef HAVE_TERMIOS
+      struct termios tio;
+      tcgetattr (0, &tio);
+      tio.c_lflag &= ~(ECHO);
+      tcsetattr (0, TCSANOW, &tio);
+#endif
+    }
+
+  /* Compute the start and end lines of the command
+     * region. (Actually we only use end here)
+     */
+  start = winList[CMD_WIN]->generic.origin.y;
+  end = start + winList[CMD_WIN]->generic.height - 1;
+  endcol = winList[CMD_WIN]->generic.width - 1;
+
+  if (term_memory_unlock)
+    {
+
+      /* Un-do the effect of the memory lock in terminal_inferior() */
+      tputs (term_memory_unlock, 1, (int (*)PARAMS ((int))) putchar);
+      fflush (stdout);
+
+    }
+  else if (term_scroll_region)
+    {
+
+      /* Un-do the effect of setting scroll region in terminal_inferior() */
+      /* I'm actually not sure how to do this (we don't know for
+       * sure what the scroll region was *before* we changed it),
+       * but I'll guess that setting it to the whole screen is
+       * the right thing. So, ...
+       */
+
+      /* Set scroll region to be 0..end */
+      buffer = (char *) tgoto (term_scroll_region, end, 0);
+      tputs (buffer, 1, (int (*)PARAMS ((int))) putchar);
+
+    }				/* else we're out of luck */
+
+  /* This is an attempt to keep the logical & physical
+       * cursor in synch, going into curses. Without this,
+       * curses seems to be confused by the fact that
+       * GDB has physically moved the curser on it. One
+       * visible effect of removing this code is that the
+       * locator window fails to get updated and the line
+       * of text that *should* go into the locator window
+       * often goes to the wrong place.
+       */
+  /* What's done here is to  tell curses to write a ' '
+       * at the bottom right corner of the screen.
+       * The idea is to wind up with the cursor in a known
+       * place.
+       * Note I'm relying on refresh()
+       * only writing what changed (the space),
+       * not the whole screen.
+       */
+  standend ();
+  move (end, endcol - 1);
+  addch (' ');
+  refresh ();
+
+  tui_owns_terminal = 1;
+}				/* tuiTermSetup */
+
+
+/* Called to set up the terminal for target program I/O, meaning I/O
+ * is confined to the command-window area.  We also call this on our
+ * way out of tuiDo, thus setting up the terminal this way for
+ * debugger command I/O.  */
+void
+#ifdef __STDC__
+tuiTermUnsetup (
+		 int turn_on_echo,
+		 int to_column)
+#else
+tuiTermUnsetup (turn_on_echo, to_column)
+     int turn_on_echo;
+     int to_column;
+#endif
+{
+  int start;
+  int end;
+  int curline;
+  char *buffer;
+  /* The next bunch of things are from readline */
+  extern char *term_scroll_region;
+  extern char *term_cursor_move;
+  extern char *term_memory_lock;
+  extern char *term_memory_unlock;
+  extern char *term_se;
+
+  /* We need to turn on echoing, since the TUI turns it off */
+  /* Below I only put in the TERMIOS case, since that
+     * is what applies on HP-UX.
+     */
+  if (turn_on_echo)
+    {
+#ifdef HAVE_TERMIOS
+      struct termios tio;
+      tcgetattr (0, &tio);
+      tio.c_lflag |= (ECHO);
+      tcsetattr (0, TCSANOW, &tio);
+#endif
+    }
+
+  /* Compute the start and end lines of the command
+     * region, as well as the last "real" line of
+     * the region (normally same as end, except when
+     * we're first populating the region)
+     */
+  start = winList[CMD_WIN]->generic.origin.y;
+  end = start + winList[CMD_WIN]->generic.height - 1;
+  curline = start + winList[CMD_WIN]->detail.commandInfo.curLine;
+
+  /* We want to confine target I/O to the command region.
+     * In order to do so, we must either have "memory lock"
+     * (hpterm's) or "scroll regions" (xterm's).
+     */
+  if (term_cursor_move && term_memory_lock)
+    {
+
+      /* Memory lock means lock region above cursor.
+       * So first position the cursor, then call memory lock.
+       */
+      buffer = tgoto (term_cursor_move, 0, start);
+      tputs (buffer, 1, (int (*)PARAMS ((int))) putchar);
+      tputs (term_memory_lock, 1, (int (*)PARAMS ((int))) putchar);
+
+    }
+  else if (term_scroll_region)
+    {
+
+      /* Set the scroll region to the command window */
+      buffer = tgoto (term_scroll_region, end, start);
+      tputs (buffer, 1, (int (*)PARAMS ((int))) putchar);
+
+    }				/* else we can't do anything about target I/O */
+
+  /* Also turn off standout mode, in case it is on */
+  if (term_se != NULL)
+    tputs (term_se, 1, (int (*)PARAMS ((int))) putchar);
+
+  /* Now go to the appropriate spot on the end line */
+  buffer = tgoto (term_cursor_move, to_column, end);
+  tputs (buffer, 1, (int (*)PARAMS ((int))) putchar);
+  fflush (stdout);
+
+  tui_owns_terminal = 0;
+}				/* tuiTermUnsetup */
diff --git a/gdb/tui/tuiIO.h b/gdb/tui/tuiIO.h
new file mode 100644
index 0000000..bcbeffe
--- /dev/null
+++ b/gdb/tui/tuiIO.h
@@ -0,0 +1,43 @@
+#ifndef _TUI_IO_H
+#define _TUI_IO_H
+/*
+** This header contains defitions to support tuiIO.c
+*/
+
+
+#include <stdio.h>
+
+extern void             tuiPuts_unfiltered PARAMS ((const char *, GDB_FILE *));
+extern unsigned int     tuiGetc PARAMS ((void));
+extern unsigned int     tuiBufferGetc PARAMS ((void));
+extern int              tuiRead PARAMS ((int, char *, int));
+extern void             tuiStartNewLines PARAMS ((int));
+extern void             tui_vStartNewLines PARAMS ((va_list));
+extern unsigned int     tui_vwgetch PARAMS ((va_list));
+extern void             tuiTermSetup PARAMS ((int));
+extern void             tuiTermUnsetup PARAMS ((int, int));
+
+
+
+#define m_tuiStartNewLine       tuiStartNewLines(1)
+#define m_isStartSequence(ch)   (ch == 27)
+#define m_isEndSequence(ch)     (ch == 126)
+#define m_isBackspace(ch)       (ch == 8)
+#define m_isDeleteChar(ch)      (ch == KEY_DC)
+#define m_isDeleteLine(ch)      (ch == KEY_DL)
+#define m_isDeleteToEol(ch)     (ch == KEY_EOL)
+#define m_isNextPage(ch)        (ch == KEY_NPAGE)
+#define m_isPrevPage(ch)        (ch == KEY_PPAGE)
+#define m_isLeftArrow(ch)       (ch == KEY_LEFT)
+#define m_isRightArrow(ch)      (ch == KEY_RIGHT)
+
+#define m_isCommandChar(ch)     (m_isNextPage(ch) || m_isPrevPage(ch) || \
+                                m_isLeftArrow(ch) || m_isRightArrow(ch) || \
+                                (ch == KEY_UP) || (ch == KEY_DOWN) || \
+                                (ch == KEY_SF) || (ch == KEY_SR) || \
+                                (ch == (int)'\f') || m_isStartSequence(ch))
+
+#define m_isXdbStyleCommandChar(ch)     (m_isNextPage(ch) || m_isPrevPage(ch))
+
+
+#endif /*_TUI_IO_H*/
diff --git a/gdb/tui/tuiLayout.c b/gdb/tui/tuiLayout.c
new file mode 100644
index 0000000..6aa380c
--- /dev/null
+++ b/gdb/tui/tuiLayout.c
@@ -0,0 +1,1410 @@
+/*
+** tuiLayout.c
+** This module contains procedures for handling the layout of the windows.
+*/
+
+
+#include "defs.h"
+#include "command.h"
+#include "symtab.h"
+#include "frame.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiGeneralWin.h"
+#include "tuiStack.h"
+#include "tuiRegs.h"
+#include "tuiDisassem.h"
+
+/*******************************
+** Static Local Decls
+********************************/
+
+static void _initGenWinInfo PARAMS
+  ((TuiGenWinInfoPtr, TuiWinType, int, int, int, int));
+static void _initAndMakeWin PARAMS
+  ((Opaque *, TuiWinType, int, int, int, int, int));
+static void _showSourceOrDisassemAndCommand PARAMS
+  ((TuiLayoutType));
+static void _makeSourceOrDisassemWindow PARAMS
+  ((TuiWinInfoPtr *, TuiWinType, int, int));
+static void _makeCommandWindow PARAMS ((TuiWinInfoPtr *, int, int));
+static void _makeSourceWindow PARAMS ((TuiWinInfoPtr *, int, int));
+static void _makeDisassemWindow PARAMS
+  ((TuiWinInfoPtr *, int, int));
+static void _makeDataWindow PARAMS ((TuiWinInfoPtr *, int, int));
+static void _showSourceCommand PARAMS ((void));
+static void _showDisassemCommand PARAMS ((void));
+static void _showSourceDisassemCommand PARAMS ((void));
+static void _showData PARAMS ((TuiLayoutType));
+static TuiLayoutType _nextLayout PARAMS ((void));
+static TuiLayoutType _prevLayout PARAMS ((void));
+static void _tuiLayout_command PARAMS ((char *, int));
+static void _tuiToggleLayout_command PARAMS ((char *, int));
+static void _tui_vToggleLayout_command PARAMS ((va_list));
+static void _tuiToggleSplitLayout_command PARAMS ((char *, int));
+static void _tui_vToggleSplitLayout_command PARAMS ((va_list));
+static Opaque _extractDisplayStartAddr PARAMS ((void));
+static void _tuiHandleXDBLayout PARAMS ((TuiLayoutDefPtr));
+static TuiStatus _tuiSetLayoutTo PARAMS ((char *));
+
+
+/***************************************
+** DEFINITIONS
+***************************************/
+
+#define LAYOUT_USAGE     "Usage: layout prev | next | <layout_name> \n"
+
+/***************************************
+** Static Local Data
+***************************************/
+static TuiLayoutType lastLayout = UNDEFINED_LAYOUT;
+
+/***************************************
+** PUBLIC FUNCTIONS
+***************************************/
+
+/*
+** showLayout().
+**        Show the screen layout defined
+*/
+void
+#ifdef __STDC__
+showLayout (
+	     TuiLayoutType layout)
+#else
+showLayout (layout)
+     TuiLayoutType layout;
+#endif
+{
+  TuiLayoutType curLayout = currentLayout ();
+
+  if (layout != curLayout)
+    {
+      /*
+        ** Since the new layout may cause changes in window size, we
+        ** should free the content and reallocate on next display of
+        ** source/asm
+        */
+      tuiClearAllSourceWinsContent (NO_EMPTY_SOURCE_PROMPT);
+      freeAllSourceWinsContent ();
+      clearSourceWindows ();
+      if (layout == SRC_DATA_COMMAND || layout == DISASSEM_DATA_COMMAND)
+	{
+	  _showData (layout);
+	  refreshAll (winList);
+	}
+      else
+	{
+	  /* First make the current layout be invisible */
+	  m_allBeInvisible ();
+	  m_beInvisible (locatorWinInfoPtr ());
+
+	  switch (layout)
+	    {
+	      /* Now show the new layout */
+	    case SRC_COMMAND:
+	      _showSourceCommand ();
+	      addToSourceWindows (srcWin);
+	      break;
+	    case DISASSEM_COMMAND:
+	      _showDisassemCommand ();
+	      addToSourceWindows (disassemWin);
+	      break;
+	    case SRC_DISASSEM_COMMAND:
+	      _showSourceDisassemCommand ();
+	      addToSourceWindows (srcWin);
+	      addToSourceWindows (disassemWin);
+	      break;
+	    default:
+	      break;
+	    }
+	}
+    }
+
+  return;
+}				/* showLayout */
+
+
+/*
+** tuiSetLayout()
+**    Function to set the layout to SRC_COMMAND, DISASSEM_COMMAND,
+**    SRC_DISASSEM_COMMAND, SRC_DATA_COMMAND, or DISASSEM_DATA_COMMAND.
+**    If the layout is SRC_DATA_COMMAND, DISASSEM_DATA_COMMAND, or
+**    UNDEFINED_LAYOUT, then the data window is populated according
+**    to regsDisplayType.
+*/
+TuiStatus
+#ifdef __STDC__
+tuiSetLayout (
+	       TuiLayoutType layoutType,
+	       TuiRegisterDisplayType regsDisplayType)
+#else
+tuiSetLayout (layoutType, regsDisplayType)
+     TuiLayoutType layoutType;
+     TuiRegisterDisplayType regsDisplayType;
+#endif
+{
+  TuiStatus status = TUI_SUCCESS;
+
+  if (layoutType != UNDEFINED_LAYOUT || regsDisplayType != TUI_UNDEFINED_REGS)
+    {
+      TuiLayoutType curLayout = currentLayout (), newLayout = UNDEFINED_LAYOUT;
+      int regsPopulate = FALSE;
+      Opaque addr = _extractDisplayStartAddr ();
+      TuiWinInfoPtr newWinWithFocus = (TuiWinInfoPtr) NULL, winWithFocus = tuiWinWithFocus ();
+      TuiLayoutDefPtr layoutDef = tuiLayoutDef ();
+
+
+      if (layoutType == UNDEFINED_LAYOUT &&
+	  regsDisplayType != TUI_UNDEFINED_REGS)
+	{
+	  if (curLayout == SRC_DISASSEM_COMMAND)
+	    newLayout = DISASSEM_DATA_COMMAND;
+	  else if (curLayout == SRC_COMMAND || curLayout == SRC_DATA_COMMAND)
+	    newLayout = SRC_DATA_COMMAND;
+	  else if (curLayout == DISASSEM_COMMAND ||
+		   curLayout == DISASSEM_DATA_COMMAND)
+	    newLayout = DISASSEM_DATA_COMMAND;
+	}
+      else
+	newLayout = layoutType;
+
+      regsPopulate = (newLayout == SRC_DATA_COMMAND ||
+		      newLayout == DISASSEM_DATA_COMMAND ||
+		      regsDisplayType != TUI_UNDEFINED_REGS);
+      if (newLayout != curLayout || regsDisplayType != TUI_UNDEFINED_REGS)
+	{
+	  if (newLayout != curLayout)
+	    {
+	      if (winWithFocus != cmdWin)
+		tuiClearWinFocus ();
+	      showLayout (newLayout);
+	      /*
+                ** Now determine where focus should be
+                */
+	      if (winWithFocus != cmdWin)
+		{
+		  switch (newLayout)
+		    {
+		    case SRC_COMMAND:
+		      tuiSetWinFocusTo (srcWin);
+		      layoutDef->displayMode = SRC_WIN;
+		      layoutDef->split = FALSE;
+		      break;
+		    case DISASSEM_COMMAND:
+		      /* the previous layout was not showing
+                            ** code. this can happen if there is no
+                            ** source available:
+                            ** 1. if the source file is in another dir OR
+                            ** 2. if target was compiled without -g
+                            ** We still want to show the assembly though!
+                            */
+		      addr = vcatch_errors ((OpaqueFuncPtr)
+					    tuiGetBeginAsmAddress);
+		      tuiSetWinFocusTo (disassemWin);
+		      layoutDef->displayMode = DISASSEM_WIN;
+		      layoutDef->split = FALSE;
+		      break;
+		    case SRC_DISASSEM_COMMAND:
+		      /* the previous layout was not showing
+                            ** code. this can happen if there is no
+                            ** source available:
+                            ** 1. if the source file is in another dir OR
+                            ** 2. if target was compiled without -g
+                            ** We still want to show the assembly though!
+                            */
+		      addr = vcatch_errors ((OpaqueFuncPtr)
+					    tuiGetBeginAsmAddress);
+		      if (winWithFocus == srcWin)
+			tuiSetWinFocusTo (srcWin);
+		      else
+			tuiSetWinFocusTo (disassemWin);
+		      layoutDef->split = TRUE;
+		      break;
+		    case SRC_DATA_COMMAND:
+		      if (winWithFocus != dataWin)
+			tuiSetWinFocusTo (srcWin);
+		      else
+			tuiSetWinFocusTo (dataWin);
+		      layoutDef->displayMode = SRC_WIN;
+		      layoutDef->split = FALSE;
+		      break;
+		    case DISASSEM_DATA_COMMAND:
+		      /* the previous layout was not showing
+                            ** code. this can happen if there is no
+                            ** source available:
+                            ** 1. if the source file is in another dir OR
+                            ** 2. if target was compiled without -g
+                            ** We still want to show the assembly though!
+                            */
+		      addr = vcatch_errors ((OpaqueFuncPtr)
+					    tuiGetBeginAsmAddress);
+		      if (winWithFocus != dataWin)
+			tuiSetWinFocusTo (disassemWin);
+		      else
+			tuiSetWinFocusTo (dataWin);
+		      layoutDef->displayMode = DISASSEM_WIN;
+		      layoutDef->split = FALSE;
+		      break;
+		    default:
+		      break;
+		    }
+		}
+	      if (newWinWithFocus != (TuiWinInfoPtr) NULL)
+		tuiSetWinFocusTo (newWinWithFocus);
+	      /*
+                ** Now update the window content
+                */
+	      if (!regsPopulate &&
+		  (newLayout == SRC_DATA_COMMAND ||
+		   newLayout == DISASSEM_DATA_COMMAND))
+		tuiDisplayAllData ();
+
+	      tuiUpdateSourceWindowsWithAddr (addr);
+	    }
+	  if (regsPopulate)
+	    {
+	      layoutDef->regsDisplayType =
+		(regsDisplayType == TUI_UNDEFINED_REGS ?
+		 TUI_GENERAL_REGS : regsDisplayType);
+	      tuiShowRegisters (layoutDef->regsDisplayType);
+	    }
+	}
+    }
+  else
+    status = TUI_FAILURE;
+
+  return status;
+}				/* tuiSetLayout */
+
+
+/*
+** tui_vSetLayoutTo()
+**        Function to set the layout to SRC, ASM, SPLIT, NEXT, PREV, DATA,
+**        REGS, $REGS, $GREGS, $FREGS, $SREGS with arguments in a va_list
+*/
+TuiStatus
+#ifdef __STDC__
+tui_vSetLayoutTo (
+		   va_list args)
+#else
+tui_vSetLayoutTo (args)
+     va_list args;
+#endif
+{
+  char *layoutName;
+
+  layoutName = va_arg (args, char *);
+
+  return (_tuiSetLayoutTo (layoutName));
+}				/* tui_vSetLayoutTo */
+
+
+/*
+** tuiAddWinToLayout().
+**        Add the specified window to the layout in a logical way.
+**        This means setting up the most logical layout given the
+**        window to be added.
+*/
+void
+#ifdef __STDC__
+tuiAddWinToLayout (
+		    TuiWinType type)
+#else
+tuiAddWinToLayout (type)
+     TuiWinType type;
+#endif
+{
+  TuiLayoutType curLayout = currentLayout ();
+
+  switch (type)
+    {
+    case SRC_WIN:
+      if (curLayout != SRC_COMMAND &&
+	  curLayout != SRC_DISASSEM_COMMAND &&
+	  curLayout != SRC_DATA_COMMAND)
+	{
+	  clearSourceWindowsDetail ();
+	  if (curLayout == DISASSEM_DATA_COMMAND)
+	    showLayout (SRC_DATA_COMMAND);
+	  else
+	    showLayout (SRC_COMMAND);
+	}
+      break;
+    case DISASSEM_WIN:
+      if (curLayout != DISASSEM_COMMAND &&
+	  curLayout != SRC_DISASSEM_COMMAND &&
+	  curLayout != DISASSEM_DATA_COMMAND)
+	{
+	  clearSourceWindowsDetail ();
+	  if (curLayout == SRC_DATA_COMMAND)
+	    showLayout (DISASSEM_DATA_COMMAND);
+	  else
+	    showLayout (DISASSEM_COMMAND);
+	}
+      break;
+    case DATA_WIN:
+      if (curLayout != SRC_DATA_COMMAND &&
+	  curLayout != DISASSEM_DATA_COMMAND)
+	{
+	  if (curLayout == DISASSEM_COMMAND)
+	    showLayout (DISASSEM_DATA_COMMAND);
+	  else
+	    showLayout (SRC_DATA_COMMAND);
+	}
+      break;
+    default:
+      break;
+    }
+
+  return;
+}				/* tuiAddWinToLayout */
+
+
+/*
+** tui_vAddWinToLayout().
+**        Add the specified window to the layout in a logical way,
+**        with arguments in a va_list.
+*/
+void
+#ifdef __STDC__
+tui_vAddWinToLayout (
+		      va_list args)
+#else
+tui_vAddWinToLayout (args)
+     va_list args;
+#endif
+{
+  TuiWinType type = va_arg (args, TuiWinType);
+
+  tuiAddWinToLayout (type);
+
+  return;
+}				/* tui_vAddWinToLayout */
+
+
+/*
+** tuiDefaultWinHeight().
+**        Answer the height of a window.  If it hasn't been created yet,
+**        answer what the height of a window would be based upon its
+**        type and the layout.
+*/
+int
+#ifdef __STDC__
+tuiDefaultWinHeight (
+		      TuiWinType type,
+		      TuiLayoutType layout)
+#else
+tuiDefaultWinHeight (type, layout)
+     TuiWinType type;
+     TuiLayoutType layout;
+#endif
+{
+  int h;
+
+  if (winList[type] != (TuiWinInfoPtr) NULL)
+    h = winList[type]->generic.height;
+  else
+    {
+      switch (layout)
+	{
+	case SRC_COMMAND:
+	case DISASSEM_COMMAND:
+	  if (m_winPtrIsNull (cmdWin))
+	    h = termHeight () / 2;
+	  else
+	    h = termHeight () - cmdWin->generic.height;
+	  break;
+	case SRC_DISASSEM_COMMAND:
+	case SRC_DATA_COMMAND:
+	case DISASSEM_DATA_COMMAND:
+	  if (m_winPtrIsNull (cmdWin))
+	    h = termHeight () / 3;
+	  else
+	    h = (termHeight () - cmdWin->generic.height) / 2;
+	  break;
+	default:
+	  h = 0;
+	  break;
+	}
+    }
+
+  return h;
+}				/* tuiDefaultWinHeight */
+
+
+/*
+** tuiDefaultWinViewportHeight().
+**        Answer the height of a window.  If it hasn't been created yet,
+**        answer what the height of a window would be based upon its
+**        type and the layout.
+*/
+int
+#ifdef __STDC__
+tuiDefaultWinViewportHeight (
+			      TuiWinType type,
+			      TuiLayoutType layout)
+#else
+tuiDefaultWinViewportHeight (type, layout)
+     TuiWinType type;
+     TuiLayoutType layout;
+#endif
+{
+  int h;
+
+  h = tuiDefaultWinHeight (type, layout);
+
+  if (winList[type] == cmdWin)
+    h -= 1;
+  else
+    h -= 2;
+
+  return h;
+}				/* tuiDefaultWinViewportHeight */
+
+
+/*
+** _initialize_tuiLayout().
+**        Function to initialize gdb commands, for tui window layout
+**        manipulation.
+*/
+void
+_initialize_tuiLayout ()
+{
+  if (tui_version)
+    {
+      add_com ("layout", class_tui, _tuiLayout_command,
+	       "Change the layout of windows.\n\
+Usage: layout prev | next | <layout_name> \n\
+Layout names are:\n\
+   src   : Displays source and command windows.\n\
+   asm   : Displays disassembly and command windows.\n\
+   split : Displays source, disassembly and command windows.\n\
+   regs  : Displays register window. If existing layout\n\
+           is source/command or assembly/command, the \n\
+           register window is displayed. If the\n\
+           source/assembly/command (split) is displayed, \n\
+           the register window is displayed with \n\
+           the window that has current logical focus.\n");
+      if (xdb_commands)
+	{
+	  add_com ("td", class_tui, _tuiToggleLayout_command,
+		   "Toggle between Source/Command and Disassembly/Command layouts.\n");
+	  add_com ("ts", class_tui, _tuiToggleSplitLayout_command,
+		   "Toggle between Source/Command or Disassembly/Command and \n\
+Source/Disassembly/Command layouts.\n");
+	}
+    }
+
+  return;
+}				/* _intialize_tuiLayout */
+
+
+/*************************
+** STATIC LOCAL FUNCTIONS
+**************************/
+
+
+/*
+** _tuiSetLayoutTo()
+**    Function to set the layout to SRC, ASM, SPLIT, NEXT, PREV, DATA, REGS,
+**        $REGS, $GREGS, $FREGS, $SREGS.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetLayoutTo (
+		  char *layoutName)
+#else
+_tuiSetLayoutTo (layoutName)
+     char *layoutName;
+#endif
+{
+  TuiStatus status = TUI_SUCCESS;
+
+  if (layoutName != (char *) NULL)
+    {
+      register int i;
+      register char *bufPtr;
+      TuiLayoutType newLayout = UNDEFINED_LAYOUT;
+      TuiRegisterDisplayType dpyType = TUI_UNDEFINED_REGS;
+      TuiLayoutType curLayout = currentLayout ();
+
+      bufPtr = (char *) tuiStrDup (layoutName);
+      for (i = 0; (i < strlen (layoutName)); i++)
+	bufPtr[i] = toupper (bufPtr[i]);
+
+      /* First check for ambiguous input */
+      if (strlen (bufPtr) <= 1 && (*bufPtr == 'S' || *bufPtr == '$'))
+	{
+	  warning ("Ambiguous command input.\n");
+	  status = TUI_FAILURE;
+	}
+      else
+	{
+	  if (subsetCompare (bufPtr, "SRC"))
+	    newLayout = SRC_COMMAND;
+	  else if (subsetCompare (bufPtr, "ASM"))
+	    newLayout = DISASSEM_COMMAND;
+	  else if (subsetCompare (bufPtr, "SPLIT"))
+	    newLayout = SRC_DISASSEM_COMMAND;
+	  else if (subsetCompare (bufPtr, "REGS") ||
+		   subsetCompare (bufPtr, TUI_GENERAL_SPECIAL_REGS_NAME) ||
+		   subsetCompare (bufPtr, TUI_GENERAL_REGS_NAME) ||
+		   subsetCompare (bufPtr, TUI_FLOAT_REGS_NAME) ||
+		   subsetCompare (bufPtr, TUI_SPECIAL_REGS_NAME))
+	    {
+	      if (curLayout == SRC_COMMAND || curLayout == SRC_DATA_COMMAND)
+		newLayout = SRC_DATA_COMMAND;
+	      else
+		newLayout = DISASSEM_DATA_COMMAND;
+
+/* could ifdef out the following code. when compile with -z, there are null 
+   pointer references that cause a core dump if 'layout regs' is the first 
+   layout command issued by the user. HP has asked us to hook up this code 
+   - edie epstein
+ */
+	      if (subsetCompare (bufPtr, TUI_FLOAT_REGS_NAME))
+		{
+		  if (dataWin->detail.dataDisplayInfo.regsDisplayType !=
+		      TUI_SFLOAT_REGS &&
+		      dataWin->detail.dataDisplayInfo.regsDisplayType !=
+		      TUI_DFLOAT_REGS)
+		    dpyType = TUI_SFLOAT_REGS;
+		  else
+		    dpyType =
+		      dataWin->detail.dataDisplayInfo.regsDisplayType;
+		}
+	      else if (subsetCompare (bufPtr,
+				      TUI_GENERAL_SPECIAL_REGS_NAME))
+		dpyType = TUI_GENERAL_AND_SPECIAL_REGS;
+	      else if (subsetCompare (bufPtr, TUI_GENERAL_REGS_NAME))
+		dpyType = TUI_GENERAL_REGS;
+	      else if (subsetCompare (bufPtr, TUI_SPECIAL_REGS_NAME))
+		dpyType = TUI_SPECIAL_REGS;
+	      else
+		{
+		  if (dataWin->detail.dataDisplayInfo.regsDisplayType !=
+		      TUI_UNDEFINED_REGS)
+		    dpyType =
+		      dataWin->detail.dataDisplayInfo.regsDisplayType;
+		  else
+		    dpyType = TUI_GENERAL_REGS;
+		}
+
+/* end of potential ifdef 
+ */
+
+/* if ifdefed out code above, then assume that the user wishes to display the 
+   general purpose registers 
+ */
+
+/*              dpyType = TUI_GENERAL_REGS; 
+ */
+	    }
+	  else if (subsetCompare (bufPtr, "NEXT"))
+	    newLayout = _nextLayout ();
+	  else if (subsetCompare (bufPtr, "PREV"))
+	    newLayout = _prevLayout ();
+	  else
+	    status = TUI_FAILURE;
+	  free (bufPtr);
+
+	  tuiSetLayout (newLayout, dpyType);
+	}
+    }
+  else
+    status = TUI_FAILURE;
+
+  return status;
+}				/* _tuiSetLayoutTo */
+
+
+static Opaque
+#ifdef __STDC__
+_extractDisplayStartAddr (void)
+#else
+_extractDisplayStartAddr ()
+#endif
+{
+  TuiLayoutType curLayout = currentLayout ();
+  Opaque addr;
+
+  switch (curLayout)
+    {
+    case SRC_COMMAND:
+    case SRC_DATA_COMMAND:
+      addr = (Opaque) find_line_pc (
+				     current_source_symtab,
+			  srcWin->detail.sourceInfo.startLineOrAddr.lineNo);
+      break;
+    case DISASSEM_COMMAND:
+    case SRC_DISASSEM_COMMAND:
+    case DISASSEM_DATA_COMMAND:
+      addr = disassemWin->detail.sourceInfo.startLineOrAddr.addr;
+      break;
+    default:
+      addr = (Opaque) NULL;
+      break;
+    }
+
+  return addr;
+}				/* _extractDisplayStartAddr */
+
+
+static void
+#ifdef __STDC__
+_tuiHandleXDBLayout (
+		      TuiLayoutDefPtr layoutDef)
+#else
+_tuiHandleXDBLayout (layoutDef)
+     TuiLayoutDefPtr layoutDef;
+#endif
+{
+  if (layoutDef->split)
+    {
+      tuiSetLayout (SRC_DISASSEM_COMMAND, TUI_UNDEFINED_REGS);
+      tuiSetWinFocusTo (winList[layoutDef->displayMode]);
+    }
+  else
+    {
+      if (layoutDef->displayMode == SRC_WIN)
+	tuiSetLayout (SRC_COMMAND, TUI_UNDEFINED_REGS);
+      else
+	tuiSetLayout (DISASSEM_DATA_COMMAND, layoutDef->regsDisplayType);
+    }
+
+
+  return;
+}				/* _tuiHandleXDBLayout */
+
+
+static void
+#ifdef __STDC__
+_tuiToggleLayout_command (
+			   char *arg,
+			   int fromTTY)
+#else
+_tuiToggleLayout_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vToggleLayout_command, arg, fromTTY);
+}
+
+static void
+#ifdef __STDC__
+_tui_vToggleLayout_command (
+			     va_list args)
+#else
+_tui_vToggleLayout_command (args)
+     va_list args;
+#endif
+{
+  TuiLayoutDefPtr layoutDef = tuiLayoutDef ();
+
+  if (layoutDef->displayMode == SRC_WIN)
+    layoutDef->displayMode = DISASSEM_WIN;
+  else
+    layoutDef->displayMode = SRC_WIN;
+
+  if (!layoutDef->split)
+    _tuiHandleXDBLayout (layoutDef);
+
+  return;
+}				/* _tuiToggleLayout_command */
+
+
+static void
+#ifdef __STDC__
+_tuiToggleSplitLayout_command (
+				char *arg,
+				int fromTTY)
+#else
+_tuiToggleSplitLayout_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vToggleSplitLayout_command, arg, fromTTY);
+}
+
+static void
+#ifdef __STDC__
+_tui_vToggleSplitLayout_command (
+				  va_list args)
+#else
+_tui_vToggleSplitLayout_command (args)
+     va_list args;
+#endif
+{
+  TuiLayoutDefPtr layoutDef = tuiLayoutDef ();
+
+  layoutDef->split = (!layoutDef->split);
+  _tuiHandleXDBLayout (layoutDef);
+
+  return;
+}				/* _tui_vToggleSplitLayout_command */
+
+
+static void
+#ifdef __STDC__
+_tuiLayout_command (
+		     char *arg,
+		     int fromTTY)
+#else
+_tuiLayout_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if ((TuiStatus) tuiDo (
+		   (TuiOpaqueFuncPtr) tui_vSetLayoutTo, arg) != TUI_SUCCESS)
+    warning ("Invalid layout specified.\n%s" LAYOUT_USAGE);
+
+  return;
+}				/* _tuiLayout_command */
+
+/*
+** _nextLayout().
+**        Answer the previous layout to cycle to.
+*/
+static TuiLayoutType
+#ifdef __STDC__
+_nextLayout (void)
+#else
+_nextLayout ()
+#endif
+{
+  TuiLayoutType newLayout;
+
+  newLayout = currentLayout ();
+  if (newLayout == UNDEFINED_LAYOUT)
+    newLayout = SRC_COMMAND;
+  else
+    {
+      newLayout++;
+      if (newLayout == UNDEFINED_LAYOUT)
+	newLayout = SRC_COMMAND;
+    }
+
+  return newLayout;
+}				/* _nextLayout */
+
+
+/*
+** _prevLayout().
+**        Answer the next layout to cycle to.
+*/
+static TuiLayoutType
+#ifdef __STDC__
+_prevLayout (void)
+#else
+_prevLayout ()
+#endif
+{
+  TuiLayoutType newLayout;
+
+  newLayout = currentLayout ();
+  if (newLayout == SRC_COMMAND)
+    newLayout = DISASSEM_DATA_COMMAND;
+  else
+    {
+      newLayout--;
+      if (newLayout == UNDEFINED_LAYOUT)
+	newLayout = DISASSEM_DATA_COMMAND;
+    }
+
+  return newLayout;
+}				/* _prevLayout */
+
+
+
+/*
+** _makeCommandWindow().
+*/
+static void
+#ifdef __STDC__
+_makeCommandWindow (
+		     TuiWinInfoPtr * winInfoPtr,
+		     int height,
+		     int originY)
+#else
+_makeCommandWindow (winInfoPtr, height, originY)
+     TuiWinInfoPtr *winInfoPtr;
+     int height;
+     int originY;
+#endif
+{
+  _initAndMakeWin ((Opaque *) winInfoPtr,
+		   CMD_WIN,
+		   height,
+		   termWidth (),
+		   0,
+		   originY,
+		   DONT_BOX_WINDOW);
+
+  (*winInfoPtr)->canHighlight = FALSE;
+
+  return;
+}				/* _makeCommandWindow */
+
+
+/*
+** _makeSourceWindow().
+*/
+static void
+#ifdef __STDC__
+_makeSourceWindow (
+		    TuiWinInfoPtr * winInfoPtr,
+		    int height,
+		    int originY)
+#else
+_makeSourceWindow (winInfoPtr, height, originY)
+     TuiWinInfoPtr *winInfoPtr;
+     int height;
+     int originY;
+#endif
+{
+  _makeSourceOrDisassemWindow (winInfoPtr, SRC_WIN, height, originY);
+
+  return;
+}				/* _makeSourceWindow */
+
+
+/*
+** _makeDisassemWindow().
+*/
+static void
+#ifdef __STDC__
+_makeDisassemWindow (
+		      TuiWinInfoPtr * winInfoPtr,
+		      int height,
+		      int originY)
+#else
+_makeDisassemWindow (winInfoPtr, height, originY)
+     TuiWinInfoPtr *winInfoPtr;
+     int height;
+     int originY;
+#endif
+{
+  _makeSourceOrDisassemWindow (winInfoPtr, DISASSEM_WIN, height, originY);
+
+  return;
+}				/* _makeDisassemWindow */
+
+
+/*
+** _makeDataWindow().
+*/
+static void
+#ifdef __STDC__
+_makeDataWindow (
+		  TuiWinInfoPtr * winInfoPtr,
+		  int height,
+		  int originY)
+#else
+_makeDataWindow (winInfoPtr, height, originY)
+     TuiWinInfoPtr *winInfoPtr;
+     int height;
+     int originY;
+#endif
+{
+  _initAndMakeWin ((Opaque *) winInfoPtr,
+		   DATA_WIN,
+		   height,
+		   termWidth (),
+		   0,
+		   originY,
+		   BOX_WINDOW);
+
+  return;
+}				/* _makeDataWindow */
+
+
+
+/*
+**    _showSourceCommand().
+**        Show the Source/Command layout
+*/
+static void
+#ifdef __STDC__
+_showSourceCommand (void)
+#else
+_showSourceCommand ()
+#endif
+{
+  _showSourceOrDisassemAndCommand (SRC_COMMAND);
+
+  return;
+}				/* _showSourceCommand */
+
+
+/*
+**    _showDisassemCommand().
+**        Show the Dissassem/Command layout
+*/
+static void
+#ifdef __STDC__
+_showDisassemCommand (void)
+#else
+_showDisassemCommand ()
+#endif
+{
+  _showSourceOrDisassemAndCommand (DISASSEM_COMMAND);
+
+  return;
+}				/* _showDisassemCommand */
+
+
+/*
+**    _showSourceDisassemCommand().
+**        Show the Source/Disassem/Command layout
+*/
+static void
+#ifdef __STDC__
+_showSourceDisassemCommand (void)
+#else
+_showSourceDisassemCommand ()
+#endif
+{
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+  if (currentLayout () != SRC_DISASSEM_COMMAND)
+    {
+      int cmdHeight, srcHeight, asmHeight;
+
+      if (m_winPtrNotNull (cmdWin))
+	cmdHeight = cmdWin->generic.height;
+      else
+	cmdHeight = termHeight () / 3;
+
+      srcHeight = (termHeight () - cmdHeight) / 2;
+      asmHeight = termHeight () - (srcHeight + cmdHeight);
+
+      if (m_winPtrIsNull (srcWin))
+	_makeSourceWindow (&srcWin, srcHeight, 0);
+      else
+	{
+	  _initGenWinInfo (&srcWin->generic,
+			   srcWin->generic.type,
+			   srcHeight,
+			   srcWin->generic.width,
+			   srcWin->detail.sourceInfo.executionInfo->width,
+			   0);
+	  srcWin->canHighlight = TRUE;
+	  _initGenWinInfo (srcWin->detail.sourceInfo.executionInfo,
+			   EXEC_INFO_WIN,
+			   srcHeight,
+			   3,
+			   0,
+			   0);
+	  m_beVisible (srcWin);
+	  m_beVisible (srcWin->detail.sourceInfo.executionInfo);
+	  srcWin->detail.sourceInfo.hasLocator = FALSE;;
+	}
+      if (m_winPtrNotNull (srcWin))
+	{
+	  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+	  tuiShowSourceContent (srcWin);
+	  if (m_winPtrIsNull (disassemWin))
+	    {
+	      _makeDisassemWindow (&disassemWin, asmHeight, srcHeight - 1);
+	      _initAndMakeWin ((Opaque *) & locator,
+			       LOCATOR_WIN,
+			       2 /* 1 */ ,
+			       termWidth (),
+			       0,
+			       (srcHeight + asmHeight) - 1,
+			       DONT_BOX_WINDOW);
+	    }
+	  else
+	    {
+	      _initGenWinInfo (locator,
+			       LOCATOR_WIN,
+			       2 /* 1 */ ,
+			       termWidth (),
+			       0,
+			       (srcHeight + asmHeight) - 1);
+	      disassemWin->detail.sourceInfo.hasLocator = TRUE;
+	      _initGenWinInfo (
+				&disassemWin->generic,
+				disassemWin->generic.type,
+				asmHeight,
+				disassemWin->generic.width,
+			disassemWin->detail.sourceInfo.executionInfo->width,
+				srcHeight - 1);
+	      _initGenWinInfo (disassemWin->detail.sourceInfo.executionInfo,
+			       EXEC_INFO_WIN,
+			       asmHeight,
+			       3,
+			       0,
+			       srcHeight - 1);
+	      disassemWin->canHighlight = TRUE;
+	      m_beVisible (disassemWin);
+	      m_beVisible (disassemWin->detail.sourceInfo.executionInfo);
+	    }
+	  if (m_winPtrNotNull (disassemWin))
+	    {
+	      srcWin->detail.sourceInfo.hasLocator = FALSE;
+	      disassemWin->detail.sourceInfo.hasLocator = TRUE;
+	      m_beVisible (locator);
+	      tuiShowLocatorContent ();
+	      tuiShowSourceContent (disassemWin);
+
+	      if (m_winPtrIsNull (cmdWin))
+		_makeCommandWindow (&cmdWin,
+				    cmdHeight,
+				    termHeight () - cmdHeight);
+	      else
+		{
+		  _initGenWinInfo (&cmdWin->generic,
+				   cmdWin->generic.type,
+				   cmdWin->generic.height,
+				   cmdWin->generic.width,
+				   0,
+				   cmdWin->generic.origin.y);
+		  cmdWin->canHighlight = FALSE;
+		  m_beVisible (cmdWin);
+		}
+	      if (m_winPtrNotNull (cmdWin))
+		tuiRefreshWin (&cmdWin->generic);
+	    }
+	}
+      setCurrentLayoutTo (SRC_DISASSEM_COMMAND);
+    }
+
+  return;
+}				/* _showSourceDisassemCommand */
+
+
+/*
+**    _showData().
+**        Show the Source/Data/Command or the Dissassembly/Data/Command layout
+*/
+static void
+#ifdef __STDC__
+_showData (
+	    TuiLayoutType newLayout)
+#else
+_showData (newLayout)
+     TuiLayoutType newLayout;
+#endif
+{
+  int totalHeight = (termHeight () - cmdWin->generic.height);
+  int srcHeight, dataHeight;
+  TuiWinType winType;
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+
+  dataHeight = totalHeight / 2;
+  srcHeight = totalHeight - dataHeight;
+  m_allBeInvisible ();
+  m_beInvisible (locator);
+  _makeDataWindow (&dataWin, dataHeight, 0);
+  dataWin->canHighlight = TRUE;
+  if (newLayout == SRC_DATA_COMMAND)
+    winType = SRC_WIN;
+  else
+    winType = DISASSEM_WIN;
+  if (m_winPtrIsNull (winList[winType]))
+    {
+      if (winType == SRC_WIN)
+	_makeSourceWindow (&winList[winType], srcHeight, dataHeight - 1);
+      else
+	_makeDisassemWindow (&winList[winType], srcHeight, dataHeight - 1);
+      _initAndMakeWin ((Opaque *) & locator,
+		       LOCATOR_WIN,
+		       2 /* 1 */ ,
+		       termWidth (),
+		       0,
+		       totalHeight - 1,
+		       DONT_BOX_WINDOW);
+    }
+  else
+    {
+      _initGenWinInfo (&winList[winType]->generic,
+		       winList[winType]->generic.type,
+		       srcHeight,
+		       winList[winType]->generic.width,
+		   winList[winType]->detail.sourceInfo.executionInfo->width,
+		       dataHeight - 1);
+      _initGenWinInfo (winList[winType]->detail.sourceInfo.executionInfo,
+		       EXEC_INFO_WIN,
+		       srcHeight,
+		       3,
+		       0,
+		       dataHeight - 1);
+      m_beVisible (winList[winType]);
+      m_beVisible (winList[winType]->detail.sourceInfo.executionInfo);
+      _initGenWinInfo (locator,
+		       LOCATOR_WIN,
+		       2 /* 1 */ ,
+		       termWidth (),
+		       0,
+		       totalHeight - 1);
+    }
+  winList[winType]->detail.sourceInfo.hasLocator = TRUE;
+  m_beVisible (locator);
+  tuiShowLocatorContent ();
+  addToSourceWindows (winList[winType]);
+  setCurrentLayoutTo (newLayout);
+
+  return;
+}				/* _showData */
+
+/*
+** _initGenWinInfo().
+*/
+static void
+#ifdef __STDC__
+_initGenWinInfo (
+		  TuiGenWinInfoPtr winInfo,
+		  TuiWinType type,
+		  int height,
+		  int width,
+		  int originX,
+		  int originY)
+#else
+_initGenWinInfo (winInfo, type, height, width, originX, originY)
+     TuiGenWinInfoPtr winInfo;
+     TuiWinType type;
+     int height;
+     int width;
+     int originX;
+     int originY;
+#endif
+{
+  int h = height;
+
+  winInfo->type = type;
+  winInfo->width = width;
+  winInfo->height = h;
+  if (h > 1)
+    {
+      winInfo->viewportHeight = h - 1;
+      if (winInfo->type != CMD_WIN)
+	winInfo->viewportHeight--;
+    }
+  else
+    winInfo->viewportHeight = 1;
+  winInfo->origin.x = originX;
+  winInfo->origin.y = originY;
+
+  return;
+}				/* _initGenWinInfo */
+
+/*
+** _initAndMakeWin().
+*/
+static void
+#ifdef __STDC__
+_initAndMakeWin (
+		  Opaque * winInfoPtr,
+		  TuiWinType winType,
+		  int height,
+		  int width,
+		  int originX,
+		  int originY,
+		  int boxIt)
+#else
+_initAndMakeWin (winInfoPtr, winType, height, width, originX, originY, boxIt)
+     Opaque *winInfoPtr;
+     TuiWinType winType;
+     int height;
+     int width;
+     int originX;
+     int originY;
+     int boxIt;
+#endif
+{
+  Opaque opaqueWinInfo = *winInfoPtr;
+  TuiGenWinInfoPtr generic;
+
+  if (opaqueWinInfo == (Opaque) NULL)
+    {
+      if (m_winIsAuxillary (winType))
+	opaqueWinInfo = (Opaque) allocGenericWinInfo ();
+      else
+	opaqueWinInfo = (Opaque) allocWinInfo (winType);
+    }
+  if (m_winIsAuxillary (winType))
+    generic = (TuiGenWinInfoPtr) opaqueWinInfo;
+  else
+    generic = &((TuiWinInfoPtr) opaqueWinInfo)->generic;
+
+  if (opaqueWinInfo != (Opaque) NULL)
+    {
+      _initGenWinInfo (generic, winType, height, width, originX, originY);
+      if (!m_winIsAuxillary (winType))
+	{
+	  if (generic->type == CMD_WIN)
+	    ((TuiWinInfoPtr) opaqueWinInfo)->canHighlight = FALSE;
+	  else
+	    ((TuiWinInfoPtr) opaqueWinInfo)->canHighlight = TRUE;
+	}
+      makeWindow (generic, boxIt);
+      if (winType == LOCATOR_WIN)
+	tuiClearLocatorDisplay ();
+      echo ();
+    }
+  *winInfoPtr = opaqueWinInfo;
+
+  return;
+}				/* _initAndMakeWin */
+
+
+/*
+** _makeSourceOrDisassemWindow().
+*/
+static void
+#ifdef __STDC__
+_makeSourceOrDisassemWindow (
+			      TuiWinInfoPtr * winInfoPtr,
+			      TuiWinType type,
+			      int height,
+			      int originY)
+#else
+_makeSourceOrDisassemWindow (winInfoPtr, type, height, originY)
+     TuiWinInfoPtr *winInfoPtr;
+     TuiWinType type;
+     int height;
+     int originY;
+#endif
+{
+  TuiGenWinInfoPtr executionInfo = (TuiGenWinInfoPtr) NULL;
+
+  /*
+    ** Create the exeuction info window.
+    */
+  if (type == SRC_WIN)
+    executionInfo = sourceExecInfoWinPtr ();
+  else
+    executionInfo = disassemExecInfoWinPtr ();
+  _initAndMakeWin ((Opaque *) & executionInfo,
+		   EXEC_INFO_WIN,
+		   height,
+		   3,
+		   0,
+		   originY,
+		   DONT_BOX_WINDOW);
+  /*
+    ** Now create the source window.
+    */
+  _initAndMakeWin ((Opaque *) winInfoPtr,
+		   type,
+		   height,
+		   termWidth () - executionInfo->width,
+		   executionInfo->width,
+		   originY,
+		   BOX_WINDOW);
+
+  (*winInfoPtr)->detail.sourceInfo.executionInfo = executionInfo;
+
+  return;
+}				/* _makeSourceOrDisassemWindow */
+
+
+/*
+**    _showSourceOrDisassemAndCommand().
+**        Show the Source/Command or the Disassem layout
+*/
+static void
+#ifdef __STDC__
+_showSourceOrDisassemAndCommand (
+				  TuiLayoutType layoutType)
+#else
+_showSourceOrDisassemAndCommand (layoutType)
+     TuiLayoutType layoutType;
+#endif
+{
+  if (currentLayout () != layoutType)
+    {
+      TuiWinInfoPtr *winInfoPtr;
+      int areaLeft;
+      int srcHeight, cmdHeight;
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+      if (m_winPtrNotNull (cmdWin))
+	cmdHeight = cmdWin->generic.height;
+      else
+	cmdHeight = termHeight () / 3;
+      srcHeight = termHeight () - cmdHeight;
+
+
+      if (layoutType == SRC_COMMAND)
+	winInfoPtr = &srcWin;
+      else
+	winInfoPtr = &disassemWin;
+
+      if (m_winPtrIsNull (*winInfoPtr))
+	{
+	  if (layoutType == SRC_COMMAND)
+	    _makeSourceWindow (winInfoPtr, srcHeight - 1, 0);
+	  else
+	    _makeDisassemWindow (winInfoPtr, srcHeight - 1, 0);
+	  _initAndMakeWin ((Opaque *) & locator,
+			   LOCATOR_WIN,
+			   2 /* 1 */ ,
+			   termWidth (),
+			   0,
+			   srcHeight - 1,
+			   DONT_BOX_WINDOW);
+	}
+      else
+	{
+	  _initGenWinInfo (locator,
+			   LOCATOR_WIN,
+			   2 /* 1 */ ,
+			   termWidth (),
+			   0,
+			   srcHeight - 1);
+	  (*winInfoPtr)->detail.sourceInfo.hasLocator = TRUE;
+	  _initGenWinInfo (
+			    &(*winInfoPtr)->generic,
+			    (*winInfoPtr)->generic.type,
+			    srcHeight - 1,
+			    (*winInfoPtr)->generic.width,
+		      (*winInfoPtr)->detail.sourceInfo.executionInfo->width,
+			    0);
+	  _initGenWinInfo ((*winInfoPtr)->detail.sourceInfo.executionInfo,
+			   EXEC_INFO_WIN,
+			   srcHeight - 1,
+			   3,
+			   0,
+			   0);
+	  (*winInfoPtr)->canHighlight = TRUE;
+	  m_beVisible (*winInfoPtr);
+	  m_beVisible ((*winInfoPtr)->detail.sourceInfo.executionInfo);
+	}
+      if (m_winPtrNotNull (*winInfoPtr))
+	{
+	  (*winInfoPtr)->detail.sourceInfo.hasLocator = TRUE;
+	  m_beVisible (locator);
+	  tuiShowLocatorContent ();
+	  tuiShowSourceContent (*winInfoPtr);
+
+	  if (m_winPtrIsNull (cmdWin))
+	    {
+	      _makeCommandWindow (&cmdWin, cmdHeight, srcHeight);
+	      tuiRefreshWin (&cmdWin->generic);
+	    }
+	  else
+	    {
+	      _initGenWinInfo (&cmdWin->generic,
+			       cmdWin->generic.type,
+			       cmdWin->generic.height,
+			       cmdWin->generic.width,
+			       cmdWin->generic.origin.x,
+			       cmdWin->generic.origin.y);
+	      cmdWin->canHighlight = FALSE;
+	      m_beVisible (cmdWin);
+	    }
+	}
+      setCurrentLayoutTo (layoutType);
+    }
+
+  return;
+}				/* _showSourceOrDisassemAndCommand */
diff --git a/gdb/tui/tuiLayout.h b/gdb/tui/tuiLayout.h
new file mode 100644
index 0000000..57d8bbc
--- /dev/null
+++ b/gdb/tui/tuiLayout.h
@@ -0,0 +1,15 @@
+#ifndef TUI_LAYOUT_H
+#define TUI_LAYOUT_H
+
+extern void             showLayout PARAMS ((TuiLayoutType));
+extern void             tuiAddWinToLayout PARAMS ((TuiWinType));
+extern void             tui_vAddWinToLayout PARAMS ((va_list));
+extern int              tuiDefaultWinHeight 
+                             PARAMS ((TuiWinType, TuiLayoutType));
+extern int              tuiDefaultWinViewportHeight 
+                             PARAMS ((TuiWinType, TuiLayoutType));
+extern TuiStatus        tuiSetLayout 
+                             PARAMS ((TuiLayoutType, TuiRegisterDisplayType));
+extern TuiStatus        tui_vSetLayoutTo PARAMS ((va_list));
+
+#endif /*TUI_LAYOUT_H*/
diff --git a/gdb/tui/tuiRegs.c b/gdb/tui/tuiRegs.c
new file mode 100644
index 0000000..b78b9bc
--- /dev/null
+++ b/gdb/tui/tuiRegs.c
@@ -0,0 +1,1210 @@
+
+/*
+** tuiRegs.c
+**         This module contains functions to support display of registers
+**         in the data window.
+*/
+
+
+#include "defs.h"
+#include "tui.h"
+#include "tuiData.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "gdbcmd.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "tuiLayout.h"
+#include "tuiWin.h"
+
+
+/*****************************************
+** LOCAL DEFINITIONS                    **
+******************************************/
+#define DOUBLE_FLOAT_LABEL_WIDTH    6
+#define DOUBLE_FLOAT_LABEL_FMT      "%6.6s: "
+#define DOUBLE_FLOAT_VALUE_WIDTH    30	/*min of 16 but may be in sci notation */
+
+#define SINGLE_FLOAT_LABEL_WIDTH    6
+#define SINGLE_FLOAT_LABEL_FMT      "%6.6s: "
+#define SINGLE_FLOAT_VALUE_WIDTH    25	/* min of 8 but may be in sci notation */
+
+#define SINGLE_LABEL_WIDTH    10
+#define SINGLE_LABEL_FMT      "%10.10s: "
+#define SINGLE_VALUE_WIDTH    14/* minimum of 8 but may be in sci notation */
+
+/* In the code HP gave Cygnus, this was actually a function call to a
+   PA-specific function, which was supposed to determine whether the
+   target was a 64-bit or 32-bit processor.  However, the 64-bit
+   support wasn't complete, so we didn't merge that in, so we leave
+   this here as a stub.  */
+#define IS_64BIT 0
+
+/*****************************************
+** STATIC DATA                          **
+******************************************/
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+static TuiStatus _tuiSetRegsContent
+  PARAMS ((int, int, struct frame_info *,
+	   TuiRegisterDisplayType, int));
+static char *_tuiRegisterName PARAMS ((int));
+static TuiStatus _tuiGetRegisterRawValue
+  PARAMS ((int, char *, struct frame_info *));
+static void _tuiSetRegisterElement
+  PARAMS ((int, struct frame_info *,
+	   TuiDataElementPtr, int));
+static void _tuiDisplayRegister
+  PARAMS ((int, TuiGenWinInfoPtr, enum precision_type));
+static void _tuiRegisterFormat
+  PARAMS ((char *, int, int, TuiDataElementPtr,
+	   enum precision_type));
+static TuiStatus _tuiSetGeneralRegsContent PARAMS ((int));
+static TuiStatus _tuiSetSpecialRegsContent PARAMS ((int));
+static TuiStatus _tuiSetGeneralAndSpecialRegsContent PARAMS ((int));
+static TuiStatus _tuiSetFloatRegsContent PARAMS ((TuiRegisterDisplayType, int));
+static int _tuiRegValueHasChanged
+  PARAMS ((TuiDataElementPtr, struct frame_info *,
+	   char *));
+static void _tuiShowFloat_command PARAMS ((char *, int));
+static void _tuiShowGeneral_command PARAMS ((char *, int));
+static void _tuiShowSpecial_command PARAMS ((char *, int));
+static void _tui_vShowRegisters_commandSupport PARAMS ((va_list));
+static void _tuiToggleFloatRegs_command PARAMS ((char *, int));
+static void _tuiScrollRegsForward_command PARAMS ((char *, int));
+static void _tuiScrollRegsBackward_command PARAMS ((char *, int));
+static void _tui_vShowRegisters_commandSupport PARAMS ((va_list));
+
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                     **
+******************************************/
+
+/*
+** tuiLastRegsLineNo()
+**        Answer the number of the last line in the regs display.
+**        If there are no registers (-1) is returned.
+*/
+int
+#ifdef __STDC__
+tuiLastRegsLineNo (void)
+#else
+tuiLastRegsLineNo ()
+#endif
+{
+  register int numLines = (-1);
+
+  if (dataWin->detail.dataDisplayInfo.regsContentCount > 0)
+    {
+      numLines = (dataWin->detail.dataDisplayInfo.regsContentCount /
+		  dataWin->detail.dataDisplayInfo.regsColumnCount);
+      if (dataWin->detail.dataDisplayInfo.regsContentCount %
+	  dataWin->detail.dataDisplayInfo.regsColumnCount)
+	numLines++;
+    }
+  return numLines;
+}				/* tuiLastRegsLineNo */
+
+
+/*
+** tuiLineFromRegElementNo()
+**        Answer the line number that the register element at elementNo is
+**        on.  If elementNo is greater than the number of register elements
+**        there are, -1 is returned.
+*/
+int
+#ifdef __STDC__
+tuiLineFromRegElementNo (
+			  int elementNo)
+#else
+tuiLineFromRegElementNo (elementNo)
+     int elementNo;
+#endif
+{
+  if (elementNo < dataWin->detail.dataDisplayInfo.regsContentCount)
+    {
+      int i, line = (-1);
+
+      i = 1;
+      while (line == (-1))
+	{
+	  if (elementNo <
+	      (dataWin->detail.dataDisplayInfo.regsColumnCount * i))
+	    line = i - 1;
+	  else
+	    i++;
+	}
+
+      return line;
+    }
+  else
+    return (-1);
+}				/* tuiLineFromRegElementNo */
+
+
+/*
+** tuiFirstRegElementNoInLine()
+**        Answer the index of the first element in lineNo.  If lineNo is
+**        past the register area (-1) is returned.
+*/
+int
+#ifdef __STDC__
+tuiFirstRegElementNoInLine (
+			     int lineNo)
+#else
+tuiFirstRegElementNoInLine (lineNo)
+     int lineNo;
+#endif
+{
+  if ((lineNo * dataWin->detail.dataDisplayInfo.regsColumnCount)
+      <= dataWin->detail.dataDisplayInfo.regsContentCount)
+    return ((lineNo + 1) *
+	    dataWin->detail.dataDisplayInfo.regsColumnCount) -
+      dataWin->detail.dataDisplayInfo.regsColumnCount;
+  else
+    return (-1);
+}				/* tuiFirstRegElementNoInLine */
+
+
+/*
+** tuiLastRegElementNoInLine()
+**        Answer the index of the last element in lineNo.  If lineNo is past
+**        the register area (-1) is returned.
+*/
+int
+#ifdef __STDC__
+tuiLastRegElementNoInLine (
+			    int lineNo)
+#else
+tuiLastRegElementNoInLine (lineNo)
+     int lineNo;
+#endif
+{
+  if ((lineNo * dataWin->detail.dataDisplayInfo.regsColumnCount) <=
+      dataWin->detail.dataDisplayInfo.regsContentCount)
+    return ((lineNo + 1) *
+	    dataWin->detail.dataDisplayInfo.regsColumnCount) - 1;
+  else
+    return (-1);
+}				/* tuiLastRegElementNoInLine */
+
+
+/*
+** tuiCalculateRegsColumnCount
+**        Calculate the number of columns that should be used to display
+**        the registers.
+*/
+int
+#ifdef __STDC__
+tuiCalculateRegsColumnCount (
+			      TuiRegisterDisplayType dpyType)
+#else
+tuiCalculateRegsColumnCount (dpyType)
+     TuiRegisterDisplayType dpyType;
+#endif
+{
+  int colCount, colWidth;
+
+  if (IS_64BIT || dpyType == TUI_DFLOAT_REGS)
+    colWidth = DOUBLE_FLOAT_VALUE_WIDTH + DOUBLE_FLOAT_LABEL_WIDTH;
+  else
+    {
+      if (dpyType == TUI_SFLOAT_REGS)
+	colWidth = SINGLE_FLOAT_VALUE_WIDTH + SINGLE_FLOAT_LABEL_WIDTH;
+      else
+	colWidth = SINGLE_VALUE_WIDTH + SINGLE_LABEL_WIDTH;
+    }
+  colCount = (dataWin->generic.width - 2) / colWidth;
+
+  return colCount;
+}				/* tuiCalulateRegsColumnCount */
+
+
+/*
+** tuiShowRegisters().
+**        Show the registers int the data window as indicated by dpyType.
+**        If there is any other registers being displayed, then they are
+**        cleared.  What registers are displayed is dependent upon dpyType.
+*/
+void
+#ifdef __STDC__
+tuiShowRegisters (
+		   TuiRegisterDisplayType dpyType)
+#else
+tuiShowRegisters (dpyType)
+     TuiRegisterDisplayType dpyType;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  int refreshValuesOnly = FALSE;
+
+  /* Say that registers should be displayed, even if there is a problem */
+  dataWin->detail.dataDisplayInfo.displayRegs = TRUE;
+
+  if (target_has_registers)
+    {
+      refreshValuesOnly =
+	(dpyType == dataWin->detail.dataDisplayInfo.regsDisplayType);
+      switch (dpyType)
+	{
+	case TUI_GENERAL_REGS:
+	  ret = _tuiSetGeneralRegsContent (refreshValuesOnly);
+	  break;
+	case TUI_SFLOAT_REGS:
+	case TUI_DFLOAT_REGS:
+	  ret = _tuiSetFloatRegsContent (dpyType, refreshValuesOnly);
+	  break;
+
+/* could ifdef out */
+
+	case TUI_SPECIAL_REGS:
+	  ret = _tuiSetSpecialRegsContent (refreshValuesOnly);
+	  break;
+	case TUI_GENERAL_AND_SPECIAL_REGS:
+	  ret = _tuiSetGeneralAndSpecialRegsContent (refreshValuesOnly);
+	  break;
+
+/* end of potential if def */
+
+	default:
+	  break;
+	}
+    }
+  if (ret == TUI_FAILURE)
+    {
+      dataWin->detail.dataDisplayInfo.regsDisplayType = TUI_UNDEFINED_REGS;
+      tuiEraseDataContent (NO_REGS_STRING);
+    }
+  else
+    {
+      int i;
+
+      /* Clear all notation of changed values */
+      for (i = 0; (i < dataWin->detail.dataDisplayInfo.regsContentCount); i++)
+	{
+	  TuiGenWinInfoPtr dataItemWin;
+
+	  dataItemWin = &dataWin->detail.dataDisplayInfo.
+	    regsContent[i]->whichElement.dataWindow;
+	  (&((TuiWinElementPtr)
+	     dataItemWin->content[0])->whichElement.data)->highlight = FALSE;
+	}
+      dataWin->detail.dataDisplayInfo.regsDisplayType = dpyType;
+      tuiDisplayAllData ();
+    }
+  (tuiLayoutDef ())->regsDisplayType = dpyType;
+
+  return;
+}				/* tuiShowRegisters */
+
+
+/*
+** tuiDisplayRegistersFrom().
+**        Function to display the registers in the content from
+**        'startElementNo' until the end of the register content or the
+**        end of the display height.  No checking for displaying past
+**        the end of the registers is done here.
+*/
+void
+#ifdef __STDC__
+tuiDisplayRegistersFrom (
+			  int startElementNo)
+#else
+tuiDisplayRegistersFrom (startElementNo)
+     int startElementNo;
+#endif
+{
+  if (dataWin->detail.dataDisplayInfo.regsContent != (TuiWinContent) NULL &&
+      dataWin->detail.dataDisplayInfo.regsContentCount > 0)
+    {
+      register int i = startElementNo;
+      int j, valueCharsWide, charsWide, itemWinWidth, curY, labelWidth;
+      enum precision_type precision;
+
+      precision = (dataWin->detail.dataDisplayInfo.regsDisplayType
+		   == TUI_DFLOAT_REGS) ?
+	double_precision : unspecified_precision;
+      if (IS_64BIT ||
+	  dataWin->detail.dataDisplayInfo.regsDisplayType == TUI_DFLOAT_REGS)
+	{
+	  valueCharsWide = DOUBLE_FLOAT_VALUE_WIDTH;
+	  labelWidth = DOUBLE_FLOAT_LABEL_WIDTH;
+	}
+      else
+	{
+	  if (dataWin->detail.dataDisplayInfo.regsDisplayType ==
+	      TUI_SFLOAT_REGS)
+	    {
+	      valueCharsWide = SINGLE_FLOAT_VALUE_WIDTH;
+	      labelWidth = SINGLE_FLOAT_LABEL_WIDTH;
+	    }
+	  else
+	    {
+	      valueCharsWide = SINGLE_VALUE_WIDTH;
+	      labelWidth = SINGLE_LABEL_WIDTH;
+	    }
+	}
+      itemWinWidth = valueCharsWide + labelWidth;
+      /*
+        ** Now create each data "sub" window, and write the display into it.
+        */
+      curY = 1;
+      while (i < dataWin->detail.dataDisplayInfo.regsContentCount &&
+	     curY <= dataWin->generic.viewportHeight)
+	{
+	  for (j = 0;
+	       (j < dataWin->detail.dataDisplayInfo.regsColumnCount &&
+		i < dataWin->detail.dataDisplayInfo.regsContentCount); j++)
+	    {
+	      TuiGenWinInfoPtr dataItemWin;
+	      TuiDataElementPtr dataElementPtr;
+
+	      /* create the window if necessary*/
+	      dataItemWin = &dataWin->detail.dataDisplayInfo.
+		regsContent[i]->whichElement.dataWindow;
+	      dataElementPtr = &((TuiWinElementPtr)
+				 dataItemWin->content[0])->whichElement.data;
+	      if (dataItemWin->handle == (WINDOW *) NULL)
+		{
+		  dataItemWin->height = 1;
+		  dataItemWin->width = (precision == double_precision) ?
+		    itemWinWidth + 2 : itemWinWidth + 1;
+		  dataItemWin->origin.x = (itemWinWidth * j) + 1;
+		  dataItemWin->origin.y = curY;
+		  makeWindow (dataItemWin, DONT_BOX_WINDOW);
+		}
+	      /*
+                ** Get the printable representation of the register
+                ** and display it
+                */
+	      _tuiDisplayRegister (
+			    dataElementPtr->itemNo, dataItemWin, precision);
+	      i++;		/* next register */
+	    }
+	  curY++;		/* next row; */
+	}
+    }
+
+  return;
+}				/* tuiDisplayRegistersFrom */
+
+
+/*
+** tuiDisplayRegElementAtLine().
+**        Function to display the registers in the content from
+**        'startElementNo' on 'startLineNo' until the end of the
+**        register content or the end of the display height.
+**        This function checks that we won't display off the end
+**        of the register display.
+*/
+void
+#ifdef __STDC__
+tuiDisplayRegElementAtLine (
+			     int startElementNo,
+			     int startLineNo)
+#else
+tuiDisplayRegElementAtLine (startElementNo, startLineNo)
+     int startElementNo;
+     int startLineNo;
+#endif
+{
+  if (dataWin->detail.dataDisplayInfo.regsContent != (TuiWinContent) NULL &&
+      dataWin->detail.dataDisplayInfo.regsContentCount > 0)
+    {
+      register int elementNo = startElementNo;
+
+      if (startElementNo != 0 && startLineNo != 0)
+	{
+	  register int lastLineNo, firstLineOnLastPage;
+
+	  lastLineNo = tuiLastRegsLineNo ();
+	  firstLineOnLastPage = lastLineNo - (dataWin->generic.height - 2);
+	  if (firstLineOnLastPage < 0)
+	    firstLineOnLastPage = 0;
+	  /*
+            ** If there is no other data displayed except registers,
+            ** and the elementNo causes us to scroll past the end of the
+            ** registers, adjust what element to really start the display at.
+            */
+	  if (dataWin->detail.dataDisplayInfo.dataContentCount <= 0 &&
+	      startLineNo > firstLineOnLastPage)
+	    elementNo = tuiFirstRegElementNoInLine (firstLineOnLastPage);
+	}
+      tuiDisplayRegistersFrom (elementNo);
+    }
+
+  return;
+}				/* tuiDisplayRegElementAtLine */
+
+
+
+/*
+** tuiDisplayRegistersFromLine().
+**        Function to display the registers starting at line lineNo in
+**        the data window.  Answers the line number that the display
+**        actually started from.  If nothing is displayed (-1) is returned.
+*/
+int
+#ifdef __STDC__
+tuiDisplayRegistersFromLine (
+			      int lineNo,
+			      int forceDisplay)
+#else
+tuiDisplayRegistersFromLine (lineNo, forceDisplay)
+     int lineNo;
+     int forceDisplay;
+#endif
+{
+  int elementNo;
+
+  if (dataWin->detail.dataDisplayInfo.regsContentCount > 0)
+    {
+      int line, elementNo;
+
+      if (lineNo < 0)
+	line = 0;
+      else if (forceDisplay)
+	{			/*
+            ** If we must display regs (forceDisplay is true), then make
+            ** sure that we don't display off the end of the registers.
+            */
+	  if (lineNo >= tuiLastRegsLineNo ())
+	    {
+	      if ((line = tuiLineFromRegElementNo (
+		 dataWin->detail.dataDisplayInfo.regsContentCount - 1)) < 0)
+		line = 0;
+	    }
+	  else
+	    line = lineNo;
+	}
+      else
+	line = lineNo;
+
+      elementNo = tuiFirstRegElementNoInLine (line);
+      if (elementNo < dataWin->detail.dataDisplayInfo.regsContentCount)
+	tuiDisplayRegElementAtLine (elementNo, line);
+      else
+	line = (-1);
+
+      return line;
+    }
+
+  return (-1);			/* nothing was displayed */
+}				/* tuiDisplayRegistersFromLine */
+
+
+/*
+** tuiCheckRegisterValues()
+**        This function check all displayed registers for changes in
+**        values, given a particular frame.  If the values have changed,
+**        they are updated with the new value and highlighted.
+*/
+void
+#ifdef __STDC__
+tuiCheckRegisterValues (
+			 struct frame_info *frame)
+#else
+tuiCheckRegisterValues (frame)
+     struct frame_info *frame;
+#endif
+{
+  if (m_winPtrNotNull (dataWin) && dataWin->generic.isVisible)
+    {
+      if (dataWin->detail.dataDisplayInfo.regsContentCount <= 0 &&
+	  dataWin->detail.dataDisplayInfo.displayRegs)
+	tuiShowRegisters ((tuiLayoutDef ())->regsDisplayType);
+      else
+	{
+	  int i, j;
+	  char rawBuf[MAX_REGISTER_RAW_SIZE];
+
+	  for (i = 0;
+	       (i < dataWin->detail.dataDisplayInfo.regsContentCount); i++)
+	    {
+	      TuiDataElementPtr dataElementPtr;
+	      TuiGenWinInfoPtr dataItemWinPtr;
+	      int wasHilighted;
+
+	      dataItemWinPtr = &dataWin->detail.dataDisplayInfo.
+		regsContent[i]->whichElement.dataWindow;
+	      dataElementPtr = &((TuiWinElementPtr)
+			     dataItemWinPtr->content[0])->whichElement.data;
+	      wasHilighted = dataElementPtr->highlight;
+	      dataElementPtr->highlight =
+		_tuiRegValueHasChanged (dataElementPtr, frame, &rawBuf[0]);
+	      if (dataElementPtr->highlight)
+		{
+		  for (j = 0; j < MAX_REGISTER_RAW_SIZE; j++)
+		    ((char *) dataElementPtr->value)[j] = rawBuf[j];
+		  _tuiDisplayRegister (
+					dataElementPtr->itemNo,
+					dataItemWinPtr,
+			((dataWin->detail.dataDisplayInfo.regsDisplayType ==
+			  TUI_DFLOAT_REGS) ?
+			 double_precision : unspecified_precision));
+		}
+	      else if (wasHilighted)
+		{
+		  dataElementPtr->highlight = FALSE;
+		  _tuiDisplayRegister (
+					dataElementPtr->itemNo,
+					dataItemWinPtr,
+			((dataWin->detail.dataDisplayInfo.regsDisplayType ==
+			  TUI_DFLOAT_REGS) ?
+			 double_precision : unspecified_precision));
+		}
+	    }
+	}
+    }
+  return;
+}				/* tuiCheckRegisterValues */
+
+
+/*
+** tuiToggleFloatRegs().
+*/
+void
+#ifdef __STDC__
+tuiToggleFloatRegs (void)
+#else
+tuiToggleFloatRegs ()
+#endif
+{
+  TuiLayoutDefPtr layoutDef = tuiLayoutDef ();
+
+  if (layoutDef->floatRegsDisplayType == TUI_SFLOAT_REGS)
+    layoutDef->floatRegsDisplayType = TUI_DFLOAT_REGS;
+  else
+    layoutDef->floatRegsDisplayType = TUI_SFLOAT_REGS;
+
+  if (m_winPtrNotNull (dataWin) && dataWin->generic.isVisible &&
+      (dataWin->detail.dataDisplayInfo.regsDisplayType == TUI_SFLOAT_REGS ||
+       dataWin->detail.dataDisplayInfo.regsDisplayType == TUI_DFLOAT_REGS))
+    tuiShowRegisters (layoutDef->floatRegsDisplayType);
+
+  return;
+}				/* tuiToggleFloatRegs */
+
+
+void
+_initialize_tuiRegs ()
+{
+  if (tui_version && xdb_commands)
+    {
+      add_com ("fr", class_tui, _tuiShowFloat_command,
+	       "Display only floating point registers\n");
+      add_com ("gr", class_tui, _tuiShowGeneral_command,
+	       "Display only general registers\n");
+      add_com ("sr", class_tui, _tuiShowSpecial_command,
+	       "Display only special registers\n");
+      add_com ("+r", class_tui, _tuiScrollRegsForward_command,
+	       "Scroll the registers window forward\n");
+      add_com ("-r", class_tui, _tuiScrollRegsBackward_command,
+	       "Scroll the register window backward\n");
+      add_com ("tf", class_tui, _tuiToggleFloatRegs_command,
+	       "Toggle between single and double precision floating point registers.\n");
+      add_cmd (TUI_FLOAT_REGS_NAME_LOWER,
+	       class_tui,
+	       _tuiToggleFloatRegs_command,
+	       "Toggle between single and double precision floating point \
+registers.\n",
+	       &togglelist);
+    }
+
+  return;
+}				/* _initialize_tuiRegs */
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS                 **
+******************************************/
+
+
+/*
+** _tuiRegisterName().
+**        Return the register name.
+*/
+static char *
+#ifdef __STDC__
+_tuiRegisterName (
+		   int regNum)
+#else
+_tuiRegisterName (regNum)
+     int regNum;
+#endif
+{
+  if (reg_names[regNum] != (char *) NULL && *(reg_names[regNum]) != (char) 0)
+    return reg_names[regNum];
+  else
+    return ((char *) NULL);
+}				/* tuiGetRegisterName */
+
+
+/*
+** _tuiRegisterFormat
+**        Function to format the register name and value into a buffer,
+**        suitable for printing or display
+*/
+static void
+#ifdef __STDC__
+_tuiRegisterFormat (
+		     char *buf,
+		     int bufLen,
+		     int regNum,
+		     TuiDataElementPtr dataElement,
+		     enum precision_type precision)
+#else
+_tuiRegisterFormat (buf, bufLen, regNum, dataElement, precision)
+     char *buf;
+     int bufLen;
+     int regNum;
+     TuiDataElementPtr dataElement;
+     enum precision_type precision;
+#endif
+{
+  char tmpBuf[15];
+  char *fmt;
+  GDB_FILE *stream;
+
+  stream = gdb_file_init_astring(bufLen);
+  pa_do_strcat_registers_info (regNum, 0, stream, precision);
+  strcpy (buf, gdb_file_get_strbuf(stream));
+  gdb_file_deallocate(&stream);
+
+  return;
+}				/* _tuiRegisterFormat */
+
+
+#define NUM_GENERAL_REGS    32
+/*
+** _tuiSetGeneralRegsContent().
+**      Set the content of the data window to consist of the general registers.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetGeneralRegsContent (
+			    int refreshValuesOnly)
+#else
+_tuiSetGeneralRegsContent (refreshValuesOnly)
+     int refreshValuesOnly;
+#endif
+{
+  return (_tuiSetRegsContent (0,
+			      NUM_GENERAL_REGS - 1,
+			      selected_frame,
+			      TUI_GENERAL_REGS,
+			      refreshValuesOnly));
+
+}				/* _tuiSetGeneralRegsContent */
+
+
+#define START_SPECIAL_REGS    PCOQ_HEAD_REGNUM
+/*
+** _tuiSetSpecialRegsContent().
+**      Set the content of the data window to consist of the special registers.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetSpecialRegsContent (
+			    int refreshValuesOnly)
+#else
+_tuiSetSpecialRegsContent (refreshValuesOnly)
+     int refreshValuesOnly;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  int i, endRegNum;
+
+  endRegNum = FP0_REGNUM - 1;
+#if 0
+  endRegNum = (-1);
+  for (i = START_SPECIAL_REGS; (i < ARCH_NUM_REGS && endRegNum < 0); i++)
+    if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+      endRegNum = i - 1;
+#endif
+  ret = _tuiSetRegsContent (START_SPECIAL_REGS,
+			    endRegNum,
+			    selected_frame,
+			    TUI_SPECIAL_REGS,
+			    refreshValuesOnly);
+
+  return ret;
+}				/* _tuiSetSpecialRegsContent */
+
+
+/*
+** _tuiSetGeneralAndSpecialRegsContent().
+**      Set the content of the data window to consist of the special registers.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetGeneralAndSpecialRegsContent (
+				      int refreshValuesOnly)
+#else
+_tuiSetGeneralAndSpecialRegsContent (refreshValuesOnly)
+     int refreshValuesOnly;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  int i, endRegNum = (-1);
+
+  endRegNum = FP0_REGNUM - 1;
+#if 0
+  endRegNum = (-1);
+  for (i = 0; (i < ARCH_NUM_REGS && endRegNum < 0); i++)
+    if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT)
+      endRegNum = i - 1;
+#endif
+  ret = _tuiSetRegsContent (
+	 0, endRegNum, selected_frame, TUI_SPECIAL_REGS, refreshValuesOnly);
+
+  return ret;
+}				/* _tuiSetGeneralAndSpecialRegsContent */
+
+/*
+** _tuiSetFloatRegsContent().
+**        Set the content of the data window to consist of the float registers.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetFloatRegsContent (
+			  TuiRegisterDisplayType dpyType,
+			  int refreshValuesOnly)
+#else
+_tuiSetFloatRegsContent (dpyType, refreshValuesOnly)
+     TuiRegisterDisplayType dpyType;
+     int refreshValuesOnly;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  int i, startRegNum;
+
+  startRegNum = FP0_REGNUM;
+#if 0
+  startRegNum = (-1);
+  for (i = ARCH_NUM_REGS - 1; (i >= 0 && startRegNum < 0); i--)
+    if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) != TYPE_CODE_FLT)
+      startRegNum = i + 1;
+#endif
+  ret = _tuiSetRegsContent (startRegNum,
+			    ARCH_NUM_REGS - 1,
+			    selected_frame,
+			    dpyType,
+			    refreshValuesOnly);
+
+  return ret;
+}				/* _tuiSetFloatRegsContent */
+
+
+/*
+** _tuiRegValueHasChanged().
+**        Answer TRUE if the register's value has changed, FALSE otherwise.
+**        If TRUE, newValue is filled in with the new value.
+*/
+static int
+#ifdef __STDC__
+_tuiRegValueHasChanged (
+			 TuiDataElementPtr dataElement,
+			 struct frame_info *frame,
+			 char *newValue)
+#else
+_tuiRegValueHasChanged (dataElement, frame, newValue)
+     TuiDataElementPtr dataElement;
+     struct frame_info *frame;
+     char *newValue;
+#endif
+{
+  int hasChanged = FALSE;
+
+  if (dataElement->itemNo != UNDEFINED_ITEM &&
+      _tuiRegisterName (dataElement->itemNo) != (char *) NULL)
+    {
+      char rawBuf[MAX_REGISTER_RAW_SIZE];
+      int i;
+
+      if (_tuiGetRegisterRawValue (
+			 dataElement->itemNo, rawBuf, frame) == TUI_SUCCESS)
+	{
+	  for (i = 0; (i < MAX_REGISTER_RAW_SIZE && !hasChanged); i++)
+	    hasChanged = (((char *) dataElement->value)[i] != rawBuf[i]);
+	  if (hasChanged && newValue != (char *) NULL)
+	    {
+	      for (i = 0; (i < MAX_REGISTER_RAW_SIZE); i++)
+		newValue[i] = rawBuf[i];
+	    }
+	}
+    }
+  return hasChanged;
+}				/* _tuiRegValueHasChanged */
+
+
+
+/*
+** _tuiGetRegisterRawValue().
+**        Get the register raw value.  The raw value is returned in regValue.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiGetRegisterRawValue (
+			  int regNum,
+			  char *regValue,
+			  struct frame_info *frame)
+#else
+_tuiGetRegisterRawValue (regNum, regValue, frame)
+     int regNum;
+     char *regValue;
+     struct frame_info *frame;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+
+  if (target_has_registers)
+    {
+      read_relative_register_raw_bytes_for_frame (regNum, regValue, frame);
+      ret = TUI_SUCCESS;
+    }
+
+  return ret;
+}				/* _tuiGetRegisterRawValue */
+
+
+
+/*
+** _tuiSetRegisterElement().
+**       Function to initialize a data element with the input and
+**       the register value.
+*/
+static void
+#ifdef __STDC__
+_tuiSetRegisterElement (
+			 int regNum,
+			 struct frame_info *frame,
+			 TuiDataElementPtr dataElement,
+			 int refreshValueOnly)
+#else
+_tuiSetRegisterElement (regNum, frame, dataElement, refreshValueOnly)
+     int regNum;
+     struct frame_info *frame;
+     TuiDataElementPtr dataElement;
+     int refreshValueOnly;
+#endif
+{
+  if (dataElement != (TuiDataElementPtr) NULL)
+    {
+      if (!refreshValueOnly)
+	{
+	  dataElement->itemNo = regNum;
+	  dataElement->name = _tuiRegisterName (regNum);
+	  dataElement->highlight = FALSE;
+	}
+      if (dataElement->value == (Opaque) NULL)
+	dataElement->value = (Opaque) xmalloc (MAX_REGISTER_RAW_SIZE);
+      if (dataElement->value != (Opaque) NULL)
+	_tuiGetRegisterRawValue (regNum, dataElement->value, frame);
+    }
+
+  return;
+}				/* _tuiSetRegisterElement */
+
+
+/*
+** _tuiSetRegsContent().
+**        Set the content of the data window to consist of the registers
+**        numbered from startRegNum to endRegNum.  Note that if
+**        refreshValuesOnly is TRUE, startRegNum and endRegNum are ignored.
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiSetRegsContent (
+		     int startRegNum,
+		     int endRegNum,
+		     struct frame_info *frame,
+		     TuiRegisterDisplayType dpyType,
+		     int refreshValuesOnly)
+#else
+_tuiSetRegsContent (startRegNum, endRegNum, frame, dpyType, refreshValuesOnly)
+     int startRegNum;
+     int endRegNum;
+     struct frame_info *frame;
+     TuiRegisterDisplayType dpyType;
+     int refreshValuesOnly;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+  int numRegs = endRegNum - startRegNum + 1;
+  int allocatedHere = FALSE;
+
+  if (dataWin->detail.dataDisplayInfo.regsContentCount > 0 &&
+      !refreshValuesOnly)
+    {
+      freeDataContent (dataWin->detail.dataDisplayInfo.regsContent,
+		       dataWin->detail.dataDisplayInfo.regsContentCount);
+      dataWin->detail.dataDisplayInfo.regsContentCount = 0;
+    }
+  if (dataWin->detail.dataDisplayInfo.regsContentCount <= 0)
+    {
+      dataWin->detail.dataDisplayInfo.regsContent =
+	allocContent (numRegs, DATA_WIN);
+      allocatedHere = TRUE;
+    }
+
+  if (dataWin->detail.dataDisplayInfo.regsContent != (TuiWinContent) NULL)
+    {
+      int i;
+
+      if (!refreshValuesOnly || allocatedHere)
+	{
+	  dataWin->generic.content = (OpaquePtr) NULL;
+	  dataWin->generic.contentSize = 0;
+	  addContentElements (&dataWin->generic, numRegs);
+	  dataWin->detail.dataDisplayInfo.regsContent =
+	    (TuiWinContent) dataWin->generic.content;
+	  dataWin->detail.dataDisplayInfo.regsContentCount = numRegs;
+	}
+      /*
+        ** Now set the register names and values
+        */
+      for (i = startRegNum; (i <= endRegNum); i++)
+	{
+	  TuiGenWinInfoPtr dataItemWin;
+
+	  dataItemWin = &dataWin->detail.dataDisplayInfo.
+	    regsContent[i - startRegNum]->whichElement.dataWindow;
+	  _tuiSetRegisterElement (
+				   i,
+				   frame,
+	   &((TuiWinElementPtr) dataItemWin->content[0])->whichElement.data,
+				   !allocatedHere && refreshValuesOnly);
+	}
+      dataWin->detail.dataDisplayInfo.regsColumnCount =
+	tuiCalculateRegsColumnCount (dpyType);
+#ifdef LATER
+      if (dataWin->detail.dataDisplayInfo.dataContentCount > 0)
+	{
+	  /* delete all the windows? */
+	  /* realloc content equal to dataContentCount + regsContentCount */
+	  /* append dataWin->detail.dataDisplayInfo.dataContent to content */
+	}
+#endif
+      dataWin->generic.contentSize =
+	dataWin->detail.dataDisplayInfo.regsContentCount +
+	dataWin->detail.dataDisplayInfo.dataContentCount;
+      ret = TUI_SUCCESS;
+    }
+
+  return ret;
+}				/* _tuiSetRegsContent */
+
+
+/*
+** _tuiDisplayRegister().
+**        Function to display a register in a window.  If hilite is TRUE,
+**        than the value will be displayed in reverse video
+*/
+static void
+#ifdef __STDC__
+_tuiDisplayRegister (
+		      int regNum,
+		      TuiGenWinInfoPtr winInfo,	/* the data item window */
+		      enum precision_type precision)
+#else
+_tuiDisplayRegister (regNum, winInfo, precision)
+     int regNum;
+     TuiGenWinInfoPtr winInfo;	/* the data item window */
+     enum precision_type precision;
+#endif
+{
+  if (winInfo->handle != (WINDOW *) NULL)
+    {
+      char buf[100];
+      int valueCharsWide, labelWidth;
+      TuiDataElementPtr dataElementPtr = &((TuiWinContent)
+				    winInfo->content)[0]->whichElement.data;
+
+      if (IS_64BIT ||
+	  dataWin->detail.dataDisplayInfo.regsDisplayType == TUI_DFLOAT_REGS)
+	{
+	  valueCharsWide = DOUBLE_FLOAT_VALUE_WIDTH;
+	  labelWidth = DOUBLE_FLOAT_LABEL_WIDTH;
+	}
+      else
+	{
+	  if (dataWin->detail.dataDisplayInfo.regsDisplayType ==
+	      TUI_SFLOAT_REGS)
+	    {
+	      valueCharsWide = SINGLE_FLOAT_VALUE_WIDTH;
+	      labelWidth = SINGLE_FLOAT_LABEL_WIDTH;
+	    }
+	  else
+	    {
+	      valueCharsWide = SINGLE_VALUE_WIDTH;
+	      labelWidth = SINGLE_LABEL_WIDTH;
+	    }
+	}
+
+      buf[0] = (char) 0;
+      _tuiRegisterFormat (buf,
+			  valueCharsWide + labelWidth,
+			  regNum,
+			  dataElementPtr,
+			  precision);
+      if (dataElementPtr->highlight)
+	wstandout (winInfo->handle);
+
+      werase (winInfo->handle);
+      wmove (winInfo->handle, 0, 0);
+      waddstr (winInfo->handle, buf);
+
+      if (dataElementPtr->highlight)
+	wstandend (winInfo->handle);
+      tuiRefreshWin (winInfo);
+    }
+  return;
+}				/* _tuiDisplayRegister */
+
+
+static void
+#ifdef __STDC__
+_tui_vShowRegisters_commandSupport (
+				     va_list args)
+#else
+_tui_vShowRegisters_commandSupport (args)
+     va_list args;
+#endif
+{
+  TuiRegisterDisplayType dpyType = va_arg (args, TuiRegisterDisplayType);
+
+  if (m_winPtrNotNull (dataWin) && dataWin->generic.isVisible)
+    {				/* Data window already displayed, show the registers */
+      if (dataWin->detail.dataDisplayInfo.regsDisplayType != dpyType)
+	tuiShowRegisters (dpyType);
+    }
+  else
+    (tuiLayoutDef ())->regsDisplayType = dpyType;
+
+  return;
+}				/* _tui_vShowRegisters_commandSupport */
+
+
+static void
+#ifdef __STDC__
+_tuiShowFloat_command (
+			char *arg,
+			int fromTTY)
+#else
+_tuiShowFloat_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (m_winPtrIsNull (dataWin) || !dataWin->generic.isVisible ||
+      (dataWin->detail.dataDisplayInfo.regsDisplayType != TUI_SFLOAT_REGS &&
+       dataWin->detail.dataDisplayInfo.regsDisplayType != TUI_DFLOAT_REGS))
+    tuiDo ((TuiOpaqueFuncPtr) _tui_vShowRegisters_commandSupport,
+	   (tuiLayoutDef ())->floatRegsDisplayType);
+
+  return;
+}				/* _tuiShowFloat_command */
+
+
+static void
+#ifdef __STDC__
+_tuiShowGeneral_command (
+			  char *arg,
+			  int fromTTY)
+#else
+_tuiShowGeneral_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vShowRegisters_commandSupport,
+	 TUI_GENERAL_REGS);
+
+  return;
+}				/* _tuiShowGeneral_command */
+
+
+static void
+#ifdef __STDC__
+_tuiShowSpecial_command (
+			  char *arg,
+			  int fromTTY)
+#else
+_tuiShowSpecial_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vShowRegisters_commandSupport,
+	 TUI_SPECIAL_REGS);
+
+  return;
+}				/* _tuiShowSpecial_command */
+
+
+static void
+#ifdef __STDC__
+_tuiToggleFloatRegs_command (
+			      char *arg,
+			      int fromTTY)
+#else
+_tuiToggleFloatRegs_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (m_winPtrNotNull (dataWin) && dataWin->generic.isVisible)
+    tuiDo ((TuiOpaqueFuncPtr) tuiToggleFloatRegs);
+  else
+    {
+      TuiLayoutDefPtr layoutDef = tuiLayoutDef ();
+
+      if (layoutDef->floatRegsDisplayType == TUI_SFLOAT_REGS)
+	layoutDef->floatRegsDisplayType = TUI_DFLOAT_REGS;
+      else
+	layoutDef->floatRegsDisplayType = TUI_SFLOAT_REGS;
+    }
+
+
+  return;
+}				/* _tuiToggleFloatRegs_command */
+
+
+static void
+#ifdef __STDC__
+_tuiScrollRegsForward_command (
+				char *arg,
+				int fromTTY)
+#else
+_tuiScrollRegsForward_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll, FORWARD_SCROLL, dataWin, 1);
+
+  return;
+}				/* _tuiScrollRegsForward_command */
+
+
+static void
+#ifdef __STDC__
+_tuiScrollRegsBackward_command (
+				 char *arg,
+				 int fromTTY)
+#else
+_tuiScrollRegsBackward_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll, BACKWARD_SCROLL, dataWin, 1);
+
+  return;
+}				/* _tuiScrollRegsBackward_command */
diff --git a/gdb/tui/tuiRegs.h b/gdb/tui/tuiRegs.h
new file mode 100644
index 0000000..4a777ec
--- /dev/null
+++ b/gdb/tui/tuiRegs.h
@@ -0,0 +1,28 @@
+#ifndef _TUI_REGS_H
+#define _TUI_REGS_H
+/*
+** This header file supports the display of registers in the data window.
+*/
+
+/*****************************************
+** TYPE DEFINITIONS                        **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTION EXTERNAL DECLS        **
+******************************************/
+extern void     tuiCheckRegisterValues PARAMS ((struct frame_info *));
+extern void     tuiShowRegisters PARAMS ((TuiRegisterDisplayType));
+extern void     tuiDisplayRegistersFrom PARAMS ((int));
+extern int      tuiDisplayRegistersFromLine PARAMS ((int, int));
+extern int      tuiLastRegsLineNo PARAMS ((void));
+extern int      tuiFirstRegElementInLine PARAMS ((int));
+extern int      tuiLastRegElementInLine PARAMS ((int));
+extern int      tuiLineFromRegElementNo PARAMS ((int));
+extern void     tuiToggleFloatRegs PARAMS ((void));
+extern int      tuiCalculateRegsColumnCount PARAMS ((TuiRegisterDisplayType));
+
+
+#endif /*_TUI_REGS_H*/
diff --git a/gdb/tui/tuiSource.c b/gdb/tui/tuiSource.c
new file mode 100644
index 0000000..e0259d0
--- /dev/null
+++ b/gdb/tui/tuiSource.c
@@ -0,0 +1,465 @@
+/*
+** tuiSource.c
+**         This module contains functions for displaying source in the source window
+*/
+
+#include "defs.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "breakpoint.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiStack.h"
+#include "tuiSourceWin.h"
+#include "tuiSource.h"
+
+
+/*****************************************
+** EXTERNAL FUNCTION DECLS                **
+******************************************/
+
+extern int open_source_file PARAMS ((struct symtab *));
+extern void find_source_lines PARAMS ((struct symtab *, int));
+
+/*****************************************
+** EXTERNAL DATA DECLS                    **
+******************************************/
+extern int current_source_line;
+extern struct symtab *current_source_symtab;
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+static struct breakpoint *_hasBreak PARAMS ((char *, int));
+
+
+/*****************************************
+** STATIC LOCAL DATA                    **
+******************************************/
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                     **
+******************************************/
+
+/*********************************
+** SOURCE/DISASSEM  FUNCTIONS    **
+*********************************/
+
+/*
+** tuiSetSourceContent().
+**    Function to display source in the source window.
+*/
+TuiStatus
+#ifdef __STDC__
+tuiSetSourceContent (
+		      struct symtab *s,
+		      int lineNo,
+		      int noerror)
+#else
+tuiSetSourceContent (s, lineNo, noerror)
+     struct symtab *s;
+     int lineNo;
+     int noerror;
+#endif
+{
+  TuiStatus ret = TUI_FAILURE;
+
+  if (s != (struct symtab *) NULL && s->filename != (char *) NULL)
+    {
+      register FILE *stream;
+      register int i, desc, c, lineWidth, nlines;
+      register char *srcLine;
+
+      if ((ret = tuiAllocSourceBuffer (srcWin)) == TUI_SUCCESS)
+	{
+	  lineWidth = srcWin->generic.width - 1;
+	  /*
+            ** Take hilite (window border) into account, when calculating
+            ** the number of lines
+            */
+	  nlines = (lineNo + (srcWin->generic.height - 2)) - lineNo;
+	  desc = open_source_file (s);
+	  if (desc < 0)
+	    {
+	      if (!noerror)
+		{
+		  char *name = alloca (strlen (s->filename) + 100);
+		  sprintf (name, "%s:%d", s->filename, lineNo);
+		  print_sys_errmsg (name, errno);
+		}
+	      ret = TUI_FAILURE;
+	    }
+	  else
+	    {
+	      if (s->line_charpos == 0)
+		find_source_lines (s, desc);
+
+	      if (lineNo < 1 || lineNo > s->nlines)
+		{
+		  close (desc);
+		  printf_unfiltered (
+			  "Line number %d out of range; %s has %d lines.\n",
+				      lineNo, s->filename, s->nlines);
+		}
+	      else if (lseek (desc, s->line_charpos[lineNo - 1], 0) < 0)
+		{
+		  close (desc);
+		  perror_with_name (s->filename);
+		}
+	      else
+		{
+		  register int offset, curLineNo, curLine, curLen, threshold;
+		  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+		  /*
+                    ** Determine the threshold for the length of the line
+                    ** and the offset to start the display
+                    */
+		  offset = srcWin->detail.sourceInfo.horizontalOffset;
+		  threshold = (lineWidth - 1) + offset;
+		  stream = fdopen (desc, FOPEN_RT);
+		  clearerr (stream);
+		  curLine = 0;
+		  curLineNo =
+		    srcWin->detail.sourceInfo.startLineOrAddr.lineNo = lineNo;
+		  if (offset > 0)
+		    srcLine = (char *) xmalloc (
+					   (threshold + 1) * sizeof (char));
+		  while (curLine < nlines)
+		    {
+		      TuiWinElementPtr element = (TuiWinElementPtr)
+		      srcWin->generic.content[curLine];
+		      struct breakpoint *bp;
+
+		      /* get the first character in the line */
+		      c = fgetc (stream);
+
+		      if (offset == 0)
+			srcLine = ((TuiWinElementPtr)
+				   srcWin->generic.content[
+					curLine])->whichElement.source.line;
+		      /* Init the line with the line number */
+		      sprintf (srcLine, "%-6d", curLineNo);
+		      curLen = strlen (srcLine);
+		      i = curLen -
+			((curLen / tuiDefaultTabLen ()) * tuiDefaultTabLen ());
+		      while (i < tuiDefaultTabLen ())
+			{
+			  srcLine[curLen] = ' ';
+			  i++;
+			  curLen++;
+			}
+		      srcLine[curLen] = (char) 0;
+
+		      /*
+                        ** Set whether element is the execution point and
+                        ** whether there is a break point on it.
+                        */
+		      element->whichElement.source.lineOrAddr.lineNo =
+			curLineNo;
+		      element->whichElement.source.isExecPoint =
+			(strcmp (((TuiWinElementPtr)
+			locator->content[0])->whichElement.locator.fileName,
+				 s->filename) == 0
+			 && curLineNo == ((TuiWinElementPtr)
+			 locator->content[0])->whichElement.locator.lineNo);
+		      bp = _hasBreak (s->filename, curLineNo);
+		      element->whichElement.source.hasBreak =
+			(bp != (struct breakpoint *) NULL &&
+			 (!element->whichElement.source.isExecPoint ||
+			  (bp->disposition != del || bp->hit_count <= 0)));
+		      if (c != EOF)
+			{
+			  i = strlen (srcLine) - 1;
+			  do
+			    {
+			      if ((c != '\n') &&
+				  (c != '\r') && (++i < threshold))
+				{
+				  if (c < 040 && c != '\t')
+				    {
+				      srcLine[i++] = '^';
+				      srcLine[i] = c + 0100;
+				    }
+				  else if (c == 0177)
+				    {
+				      srcLine[i++] = '^';
+				      srcLine[i] = '?';
+				    }
+				  else
+				    {	/*
+                                        ** Store the charcter in the line
+                                        ** buffer.  If it is a tab, then
+                                        ** translate to the correct number of
+                                        ** chars so we don't overwrite our
+                                        ** buffer.
+                                        */
+				      if (c == '\t')
+					{
+					  int j, maxTabLen = tuiDefaultTabLen ();
+
+					  for (j = i - (
+					       (i / maxTabLen) * maxTabLen);
+					       ((j < maxTabLen) &&
+						i < threshold);
+					       i++, j++)
+					    srcLine[i] = ' ';
+					  i--;
+					}
+				      else
+					srcLine[i] = c;
+				    }
+				  srcLine[i + 1] = 0;
+				}
+			      else
+				{	/*
+                                    ** if we have not reached EOL, then eat
+                                    ** chars until we do
+                                    */
+				  while (c != EOF && c != '\n' && c != '\r')
+				    c = fgetc (stream);
+				}
+			    }
+			  while (c != EOF && c != '\n' && c != '\r' &&
+				 i < threshold && (c = fgetc (stream)));
+			}
+		      /* Now copy the line taking the offset into account */
+		      if (strlen (srcLine) > offset)
+			strcpy (((TuiWinElementPtr) srcWin->generic.content[
+					curLine])->whichElement.source.line,
+				&srcLine[offset]);
+		      else
+			((TuiWinElementPtr)
+			 srcWin->generic.content[
+			  curLine])->whichElement.source.line[0] = (char) 0;
+		      curLine++;
+		      curLineNo++;
+		    }
+		  if (offset > 0)
+		    tuiFree (srcLine);
+		  fclose (stream);
+		  srcWin->generic.contentSize = nlines;
+		  ret = TUI_SUCCESS;
+		}
+	    }
+	}
+    }
+  return ret;
+}				/* tuiSetSourceContent */
+
+
+/* elz: this function sets the contents of the source window to empty
+   except for a line in the middle with a warning message about the
+   source not being available. This function is called by
+   tuiEraseSourceContents, which in turn is invoked when the source files
+   cannot be accessed*/
+
+void
+#ifdef __STDC__
+tuiSetSourceContentNil (
+			 TuiWinInfoPtr winInfo,
+			 char *warning_string)
+#else
+tuiSetSourceContentNil (winInfo, warning_string)
+     TuiWinInfoPtr winInfo;
+     char *warning_string;
+#endif
+{
+  int lineWidth;
+  int nLines;
+  int curr_line = 0;
+
+  lineWidth = winInfo->generic.width - 1;
+  nLines = winInfo->generic.height - 2;
+
+  /* set to empty each line in the window, except for the one
+    which contains the message*/
+  while (curr_line < winInfo->generic.contentSize)
+    {
+      /* set the information related to each displayed line
+     to null: i.e. the line number is 0, there is no bp,
+     it is not where the program is stopped */
+
+      TuiWinElementPtr element =
+      (TuiWinElementPtr) winInfo->generic.content[curr_line];
+      element->whichElement.source.lineOrAddr.lineNo = 0;
+      element->whichElement.source.isExecPoint = FALSE;
+      element->whichElement.source.hasBreak = FALSE;
+
+      /* set the contents of the line to blank*/
+      element->whichElement.source.line[0] = (char) 0;
+
+      /* if the current line is in the middle of the screen, then we want to
+     display the 'no source available' message in it.
+     Note: the 'weird' arithmetic with the line width and height comes from
+     the function tuiEraseSourceContent. We need to keep the screen and the
+     window's actual contents in synch */
+
+      if (curr_line == (nLines / 2 + 1))
+	{
+	  int i;
+	  int xpos;
+	  int warning_length = strlen (warning_string);
+	  char *srcLine;
+
+	  srcLine = element->whichElement.source.line;
+
+	  if (warning_length >= ((lineWidth - 1) / 2))
+	    xpos = 1;
+	  else
+	    xpos = (lineWidth - 1) / 2 - warning_length;
+
+	  for (i = 0; i < xpos; i++)
+	    srcLine[i] = ' ';
+
+	  sprintf (srcLine + i, "%s", warning_string);
+
+	  for (i = xpos + warning_length; i < lineWidth; i++)
+	    srcLine[i] = ' ';
+
+	  srcLine[i] = '\n';
+
+	}			/* end if */
+
+      curr_line++;
+
+    }				/* end while*/
+
+}				/*tuiSetSourceContentNil*/
+
+
+
+
+/*
+** tuiShowSource().
+**        Function to display source in the source window.  This function
+**        initializes the horizontal scroll to 0.
+*/
+void
+#ifdef __STDC__
+tuiShowSource (
+		struct symtab *s,
+		Opaque line,
+		int noerror)
+#else
+tuiShowSource (s, line, noerror)
+     struct symtab *s;
+     Opaque line;
+     int noerror;
+#endif
+{
+  srcWin->detail.sourceInfo.horizontalOffset = 0;
+  m_tuiShowSourceAsIs (s, line, noerror);
+
+  return;
+}				/* tuiShowSource */
+
+
+/*
+** tuiSourceIsDisplayed().
+**        Answer whether the source is currently displayed in the source window.
+*/
+int
+#ifdef __STDC__
+tuiSourceIsDisplayed (
+		       char *fname)
+#else
+tuiSourceIsDisplayed (fname)
+     char *fname;
+#endif
+{
+  return (srcWin->generic.contentInUse &&
+	  (strcmp (((TuiWinElementPtr) (locatorWinInfoPtr ())->
+		  content[0])->whichElement.locator.fileName, fname) == 0));
+}				/* tuiSourceIsDisplayed */
+
+
+/*
+** tuiVerticalSourceScroll().
+**      Scroll the source forward or backward vertically
+*/
+void
+#ifdef __STDC__
+tuiVerticalSourceScroll (
+			  TuiScrollDirection scrollDirection,
+			  int numToScroll)
+#else
+tuiVerticalSourceScroll (scrollDirection, numToScroll)
+     TuiScrollDirection scrollDirection;
+     int numToScroll;
+#endif
+{
+  if (srcWin->generic.content != (OpaquePtr) NULL)
+    {
+      int line;
+      Opaque addr;
+      struct symtab *s;
+      TuiWinContent content = (TuiWinContent) srcWin->generic.content;
+
+      if (current_source_symtab == (struct symtab *) NULL)
+	s = find_pc_symtab (selected_frame->pc);
+      else
+	s = current_source_symtab;
+
+      if (scrollDirection == FORWARD_SCROLL)
+	{
+	  line = content[0]->whichElement.source.lineOrAddr.lineNo +
+	    numToScroll;
+	  if (line > s->nlines)
+	    /*line = s->nlines - winInfo->generic.contentSize + 1;*/
+	    /*elz: fix for dts 23398*/
+	    line = content[0]->whichElement.source.lineOrAddr.lineNo;
+	}
+      else
+	{
+	  line = content[0]->whichElement.source.lineOrAddr.lineNo -
+	    numToScroll;
+	  if (line <= 0)
+	    line = 1;
+	}
+      tuiUpdateSourceWindowAsIs (srcWin, s, (Opaque) line, FALSE);
+    }
+
+  return;
+}				/* tuiVerticalSourceScroll */
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS                 **
+******************************************/
+
+/*
+** _hasBreak().
+**        Answer whether there is a break point at the input line in
+**        the source file indicated
+*/
+static struct breakpoint *
+#ifdef __STDC__
+_hasBreak (
+	    char *sourceFileName,
+	    int lineNo)
+#else
+_hasBreak (sourceFileName, lineNo)
+     char *sourceFileName;
+     int lineNo;
+#endif
+{
+  struct breakpoint *bpWithBreak = (struct breakpoint *) NULL;
+  struct breakpoint *bp;
+  extern struct breakpoint *breakpoint_chain;
+
+
+  for (bp = breakpoint_chain;
+       (bp != (struct breakpoint *) NULL &&
+	bpWithBreak == (struct breakpoint *) NULL);
+       bp = bp->next)
+    if ((strcmp (sourceFileName, bp->source_file) == 0) &&
+	(lineNo == bp->line_number))
+      bpWithBreak = bp;
+
+  return bpWithBreak;
+}				/* _hasBreak */
diff --git a/gdb/tui/tuiSource.h b/gdb/tui/tuiSource.h
new file mode 100644
index 0000000..f898c61
--- /dev/null
+++ b/gdb/tui/tuiSource.h
@@ -0,0 +1,27 @@
+#ifndef _TUI_SOURCE_H
+#define _TUI_SOURCE_H
+/*
+** This header file supports
+*/
+
+
+#include "defs.h"
+#if 0
+#include "symtab.h"
+#include "breakpoint.h"
+#endif
+
+extern TuiStatus    tuiSetSourceContent PARAMS ((struct symtab *, int, int));
+extern void         tuiShowSource PARAMS ((struct symtab *, Opaque, int));
+extern void         tuiShowSourceAsIs PARAMS ((struct symtab *, Opaque, int));
+extern int          tuiSourceIsDisplayed PARAMS ((char *));
+extern void         tuiVerticalSourceScroll PARAMS ((TuiScrollDirection, int));
+
+
+/*******************
+** MACROS         **
+*******************/
+#define m_tuiShowSourceAsIs(s, line, noerror)    tuiUpdateSourceWindowAsIs(srcWin, s, line, noerror)
+
+
+#endif /*_TUI_SOURCE_H*/
diff --git a/gdb/tui/tuiSourceWin.c b/gdb/tui/tuiSourceWin.c
new file mode 100644
index 0000000..e203925
--- /dev/null
+++ b/gdb/tui/tuiSourceWin.c
@@ -0,0 +1,1098 @@
+/*
+** tuiSourceWin.c
+**         This module contains functions for displaying source or assembly in the "source" window.
+*        The "source" window may be the assembly or the source windows.
+*/
+
+#include "defs.h"
+#include <ctype.h>
+#include "symtab.h"
+#include "frame.h"
+#include "breakpoint.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiStack.h"
+#include "tuiSourceWin.h"
+#include "tuiSource.h"
+#include "tuiDisassem.h"
+
+
+/*****************************************
+** EXTERNAL FUNCTION DECLS                **
+******************************************/
+
+/*****************************************
+** EXTERNAL DATA DECLS                    **
+******************************************/
+extern int current_source_line;
+extern struct symtab *current_source_symtab;
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+/*****************************************
+** STATIC LOCAL DATA                    **
+******************************************/
+
+
+/*****************************************
+** PUBLIC FUNCTIONS                        **
+******************************************/
+
+/*********************************
+** SOURCE/DISASSEM  FUNCTIONS    **
+*********************************/
+
+/*
+** tuiSrcWinIsDisplayed().
+*/
+int
+#ifdef __STDC__
+tuiSrcWinIsDisplayed (void)
+#else
+tuiSrcWinIsDisplayed ()
+#endif
+{
+  return (m_winPtrNotNull (srcWin) && srcWin->generic.isVisible);
+}				/* tuiSrcWinIsDisplayed */
+
+
+/*
+** tuiAsmWinIsDisplayed().
+*/
+int
+#ifdef __STDC__
+tuiAsmWinIsDisplayed (void)
+#else
+tuiAsmWinIsDisplayed ()
+#endif
+{
+  return (m_winPtrNotNull (disassemWin) && disassemWin->generic.isVisible);
+}				/* tuiAsmWinIsDisplayed */
+
+
+/*
+** tuiDisplayMainFunction().
+**        Function to display the "main" routine"
+*/
+void
+#ifdef __STDC__
+tuiDisplayMainFunction (void)
+#else
+tuiDisplayMainFunction ()
+#endif
+{
+  if ((sourceWindows ())->count > 0)
+    {
+      CORE_ADDR addr;
+
+      addr = parse_and_eval_address ("main");
+      if (addr <= (CORE_ADDR) 0)
+	addr = parse_and_eval_address ("MAIN");
+      if (addr > (CORE_ADDR) 0)
+	{
+	  struct symtab_and_line sal;
+
+	  tuiUpdateSourceWindowsWithAddr ((Opaque) addr);
+	  sal = find_pc_line (addr, 0);
+	  tuiSwitchFilename (sal.symtab->filename);
+	}
+    }
+
+  return;
+}				/* tuiDisplayMainFunction */
+
+
+
+/*
+** tuiUpdateSourceWindow().
+**    Function to display source in the source window.  This function
+**    initializes the horizontal scroll to 0.
+*/
+void
+#ifdef __STDC__
+tuiUpdateSourceWindow (
+			TuiWinInfoPtr winInfo,
+			struct symtab *s,
+			Opaque lineOrAddr,
+			int noerror)
+#else
+tuiUpdateSourceWindow (winInfo, s, lineOrAddr, noerror)
+     TuiWinInfoPtr winInfo;
+     struct symtab *s;
+     Opaque lineOrAddr;
+     int noerror;
+#endif
+{
+  winInfo->detail.sourceInfo.horizontalOffset = 0;
+  tuiUpdateSourceWindowAsIs (winInfo, s, lineOrAddr, noerror);
+
+  return;
+}				/* tuiUpdateSourceWindow */
+
+
+/*
+** tuiUpdateSourceWindowAsIs().
+**        Function to display source in the source/asm window.  This
+**        function shows the source as specified by the horizontal offset.
+*/
+void
+#ifdef __STDC__
+tuiUpdateSourceWindowAsIs (
+			    TuiWinInfoPtr winInfo,
+			    struct symtab *s,
+			    Opaque lineOrAddr,
+			    int noerror)
+#else
+tuiUpdateSourceWindowAsIs (winInfo, s, lineOrAddr, noerror)
+     TuiWinInfoPtr winInfo;
+     struct symtab *s;
+     Opaque lineOrAddr;
+     int noerror;
+#endif
+{
+  TuiStatus ret;
+
+  if (winInfo->generic.type == SRC_WIN)
+    ret = tuiSetSourceContent (s, (int) lineOrAddr, noerror);
+  else
+    ret = tuiSetDisassemContent (s, (Opaque) lineOrAddr);
+
+  if (ret == TUI_FAILURE)
+    {
+      tuiClearSourceContent (winInfo, EMPTY_SOURCE_PROMPT);
+      tuiClearExecInfoContent (winInfo);
+    }
+  else
+    {
+      tuiEraseSourceContent (winInfo, NO_EMPTY_SOURCE_PROMPT);
+      tuiShowSourceContent (winInfo);
+      tuiUpdateExecInfo (winInfo);
+      if (winInfo->generic.type == SRC_WIN)
+	{
+	  current_source_line = (int) lineOrAddr +
+	    (winInfo->generic.contentSize - 2);
+	  current_source_symtab = s;
+	  /*
+            ** If the focus was in the asm win, put it in the src
+            ** win if we don't have a split layout
+            */
+	  if (tuiWinWithFocus () == disassemWin &&
+	      currentLayout () != SRC_DISASSEM_COMMAND)
+	    tuiSetWinFocusTo (srcWin);
+	}
+    }
+
+
+  return;
+}				/* tuiUpdateSourceWindowAsIs */
+
+
+/*
+** tuiUpdateSourceWindowsWithAddr().
+**        Function to ensure that the source and/or disassemly windows
+**        reflect the input address.
+*/
+void
+#ifdef __STDC__
+tuiUpdateSourceWindowsWithAddr (
+				 Opaque addr)
+#else
+tuiUpdateSourceWindowsWithAddr (addr)
+     Opaque addr;
+#endif
+{
+  if (addr > (Opaque) NULL)
+    {
+      struct symtab_and_line sal;
+
+      switch (currentLayout ())
+	{
+	case DISASSEM_COMMAND:
+	case DISASSEM_DATA_COMMAND:
+	  tuiShowDisassem (addr);
+	  break;
+	case SRC_DISASSEM_COMMAND:
+	  tuiShowDisassemAndUpdateSource (addr);
+	  break;
+	default:
+	  sal = find_pc_line ((CORE_ADDR) addr, 0);
+	  tuiShowSource (sal.symtab,
+			 (Opaque) sal.line,
+			 FALSE);
+	  break;
+	}
+    }
+  else
+    {
+      int i;
+
+      for (i = 0; i < (sourceWindows ())->count; i++)
+	{
+	  TuiWinInfoPtr winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[i];
+
+	  tuiClearSourceContent (winInfo, EMPTY_SOURCE_PROMPT);
+	  tuiClearExecInfoContent (winInfo);
+	}
+    }
+
+  return;
+}				/* tuiUpdateSourceWindowsWithAddr */
+
+
+/*
+** tui_vUpdateSourceWindowsWithAddr()
+**        Update the source window with the address in a va_list
+*/
+void
+#ifdef __STDC__
+tui_vUpdateSourceWindowsWithAddr (
+				   va_list args)
+#else
+tui_vUpdateSourceWindowsWithAddr (args)
+     va_list args;
+#endif
+{
+  Opaque addr = va_arg (args, Opaque);
+
+  tuiUpdateSourceWindowsWithAddr (addr);
+
+  return;
+}				/* tui_vUpdateSourceWindowsWithAddr */
+
+
+/*
+** tuiUpdateSourceWindowsWithLine().
+**        Function to ensure that the source and/or disassemly windows
+**        reflect the input address.
+*/
+void
+#ifdef __STDC__
+tuiUpdateSourceWindowsWithLine (
+				 struct symtab *s,
+				 int line)
+#else
+tuiUpdateSourceWindowsWithLine (s, line)
+     struct symtab *s;
+     int line;
+#endif
+{
+  switch (currentLayout ())
+    {
+    case DISASSEM_COMMAND:
+    case DISASSEM_DATA_COMMAND:
+      tuiUpdateSourceWindowsWithAddr ((Opaque) find_line_pc (s, line));
+      break;
+    default:
+      tuiShowSource (s, (Opaque) line, FALSE);
+      if (currentLayout () == SRC_DISASSEM_COMMAND)
+	tuiShowDisassem ((Opaque) find_line_pc (s, line));
+      break;
+    }
+
+  return;
+}				/* tuiUpdateSourceWindowsWithLine */
+
+
+/*
+** tui_vUpdateSourceWindowsWithLine()
+**        Update the source window with the line number in a va_list
+*/
+void
+#ifdef __STDC__
+tui_vUpdateSourceWindowsWithLine (
+				   va_list args)
+#else
+tui_vUpdateSourceWindowsWithLine (args)
+     va_list args;
+#endif
+{
+  struct symtab *s = va_arg (args, struct symtab *);
+  int line = va_arg (args, int);
+
+  tuiUpdateSourceWindowsWithLine (s, line);
+
+  return;
+}				/* tui_vUpdateSourceWindowsWithLine */
+
+
+/*
+** tuiClearSourceContent().
+*/
+void
+#ifdef __STDC__
+tuiClearSourceContent (
+			TuiWinInfoPtr winInfo,
+			int displayPrompt)
+#else
+tuiClearSourceContent (winInfo, displayPrompt)
+     TuiWinInfoPtr winInfo;
+     int displayPrompt;
+#endif
+{
+  if (m_winPtrNotNull (winInfo))
+    {
+      register int i;
+
+      winInfo->generic.contentInUse = FALSE;
+      tuiEraseSourceContent (winInfo, displayPrompt);
+      for (i = 0; i < winInfo->generic.contentSize; i++)
+	{
+	  TuiWinElementPtr element =
+	  (TuiWinElementPtr) winInfo->generic.content[i];
+	  element->whichElement.source.hasBreak = FALSE;
+	  element->whichElement.source.isExecPoint = FALSE;
+	}
+    }
+
+  return;
+}				/* tuiClearSourceContent */
+
+
+/*
+** tuiClearAllSourceWinsContent().
+*/
+void
+#ifdef __STDC__
+tuiClearAllSourceWinsContent (
+			       int displayPrompt)
+#else
+tuiClearAllSourceWinsContent (displayPrompt)
+     int displayPrompt;
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiClearSourceContent ((TuiWinInfoPtr) (sourceWindows ())->list[i],
+			   displayPrompt);
+
+  return;
+}				/* tuiClearAllSourceWinsContent */
+
+
+/*
+** tuiEraseSourceContent().
+*/
+void
+#ifdef __STDC__
+tuiEraseSourceContent (
+			TuiWinInfoPtr winInfo,
+			int displayPrompt)
+#else
+tuiEraseSourceContent (winInfo, displayPrompt)
+     TuiWinInfoPtr winInfo;
+     int displayPrompt;
+#endif
+{
+  int xPos;
+  int halfWidth = (winInfo->generic.width - 2) / 2;
+
+  if (winInfo->generic.handle != (WINDOW *) NULL)
+    {
+      werase (winInfo->generic.handle);
+      checkAndDisplayHighlightIfNeeded (winInfo);
+      if (displayPrompt == EMPTY_SOURCE_PROMPT)
+	{
+	  char *noSrcStr;
+
+	  if (winInfo->generic.type == SRC_WIN)
+	    noSrcStr = NO_SRC_STRING;
+	  else
+	    noSrcStr = NO_DISASSEM_STRING;
+	  if (strlen (noSrcStr) >= halfWidth)
+	    xPos = 1;
+	  else
+	    xPos = halfWidth - strlen (noSrcStr);
+	  mvwaddstr (winInfo->generic.handle,
+		     (winInfo->generic.height / 2),
+		     xPos,
+		     noSrcStr);
+
+	  /* elz: added this function call to set the real contents of
+                   the window to what is on the  screen, so that later calls
+                   to refresh, do display
+                   the correct stuff, and not the old image */
+
+	  tuiSetSourceContentNil (winInfo, noSrcStr);
+	}
+      tuiRefreshWin (&winInfo->generic);
+    }
+  return;
+}				/* tuiEraseSourceContent */
+
+
+/*
+** tuiEraseAllSourceContent().
+*/
+void
+#ifdef __STDC__
+tuiEraseAllSourceWinsContent (
+			       int displayPrompt)
+#else
+tuiEraseAllSourceWinsContent (displayPrompt)
+     int displayPrompt;
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiEraseSourceContent ((TuiWinInfoPtr) (sourceWindows ())->list[i],
+			   displayPrompt);
+
+  return;
+}				/* tuiEraseAllSourceWinsContent */
+
+
+/*
+** tuiShowSourceContent().
+*/
+void
+#ifdef __STDC__
+tuiShowSourceContent (
+		       TuiWinInfoPtr winInfo)
+#else
+tuiShowSourceContent (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  int curLine, i, curX;
+
+  tuiEraseSourceContent (winInfo, (winInfo->generic.contentSize <= 0));
+  if (winInfo->generic.contentSize > 0)
+    {
+      char *line;
+
+      for (curLine = 1; (curLine <= winInfo->generic.contentSize); curLine++)
+	mvwaddstr (
+		    winInfo->generic.handle,
+		    curLine,
+		    1,
+		    ((TuiWinElementPtr)
+	  winInfo->generic.content[curLine - 1])->whichElement.source.line);
+    }
+  checkAndDisplayHighlightIfNeeded (winInfo);
+  tuiRefreshWin (&winInfo->generic);
+  winInfo->generic.contentInUse = TRUE;
+
+  return;
+}				/* tuiShowSourceContent */
+
+
+/*
+** tuiShowAllSourceWinsContent()
+*/
+void
+#ifdef __STDC__
+tuiShowAllSourceWinsContent (void)
+#else
+tuiShowAllSourceWinsContent ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiShowSourceContent ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* tuiShowAllSourceWinsContent */
+
+
+/*
+** tuiHorizontalSourceScroll().
+**      Scroll the source forward or backward horizontally
+*/
+void
+#ifdef __STDC__
+tuiHorizontalSourceScroll (
+			    TuiWinInfoPtr winInfo,
+			    TuiScrollDirection direction,
+			    int numToScroll)
+#else
+tuiHorizontalSourceScroll (winInfo, direction, numToScroll)
+     TuiWinInfoPtr winInfo;
+     TuiScrollDirection direction;
+     int numToScroll;
+#endif
+{
+  if (winInfo->generic.content != (OpaquePtr) NULL)
+    {
+      int offset;
+      struct symtab *s;
+
+      if (current_source_symtab == (struct symtab *) NULL)
+	s = find_pc_symtab (selected_frame->pc);
+      else
+	s = current_source_symtab;
+
+      if (direction == LEFT_SCROLL)
+	offset = winInfo->detail.sourceInfo.horizontalOffset + numToScroll;
+      else
+	{
+	  if ((offset =
+	     winInfo->detail.sourceInfo.horizontalOffset - numToScroll) < 0)
+	    offset = 0;
+	}
+      winInfo->detail.sourceInfo.horizontalOffset = offset;
+      tuiUpdateSourceWindowAsIs (
+				  winInfo,
+				  s,
+				  ((winInfo == srcWin) ?
+				   (Opaque) ((TuiWinElementPtr)
+       winInfo->generic.content[0])->whichElement.source.lineOrAddr.lineNo :
+				   (Opaque) ((TuiWinElementPtr)
+	 winInfo->generic.content[0])->whichElement.source.lineOrAddr.addr),
+				  (int) FALSE);
+    }
+
+  return;
+}				/* tuiHorizontalSourceScroll */
+
+
+/*
+** tuiSetHasExecPointAt().
+**        Set or clear the hasBreak flag in the line whose line is lineNo.
+*/
+void
+#ifdef __STDC__
+tuiSetIsExecPointAt (
+		      Opaque lineOrAddr,
+		      TuiWinInfoPtr winInfo)
+#else
+tuiSetIsExecPointAt (lineOrAddr, winInfo)
+     Opaque lineOrAddr;
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  int i;
+  TuiWinContent content = (TuiWinContent) winInfo->generic.content;
+
+  i = 0;
+  while (i < winInfo->generic.contentSize)
+    {
+      if (content[i]->whichElement.source.lineOrAddr.addr == lineOrAddr)
+	content[i]->whichElement.source.isExecPoint = TRUE;
+      else
+	content[i]->whichElement.source.isExecPoint = FALSE;
+      i++;
+    }
+
+  return;
+}				/* tuiSetIsExecPointAt */
+
+
+/*
+** tuiSetHasBreakAt().
+**        Set or clear the hasBreak flag in the line whose line is lineNo.
+*/
+void
+#ifdef __STDC__
+tuiSetHasBreakAt (
+		   struct breakpoint *bp,
+		   TuiWinInfoPtr winInfo,
+		   int hasBreak)
+#else
+tuiSetHasBreakAt (bp, winInfo, hasBreak)
+     struct breakpoint *bp;
+     TuiWinInfoPtr winInfo;
+     int hasBreak;
+#endif
+{
+  int i;
+  TuiWinContent content = (TuiWinContent) winInfo->generic.content;
+
+  i = 0;
+  while (i < winInfo->generic.contentSize)
+    {
+      int gotIt;
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+      if (winInfo == srcWin)
+	{
+	  char *fileNameDisplayed = (char *) NULL;
+
+	  if (((TuiWinElementPtr)
+	       locator->content[0])->whichElement.locator.fileName !=
+	      (char *) NULL)
+	    fileNameDisplayed = ((TuiWinElementPtr)
+			locator->content[0])->whichElement.locator.fileName;
+	  else if (current_source_symtab != (struct symtab *) NULL)
+	    fileNameDisplayed = current_source_symtab->filename;
+
+	  gotIt = (fileNameDisplayed != (char *) NULL &&
+		   (strcmp (bp->source_file, fileNameDisplayed) == 0) &&
+		   content[i]->whichElement.source.lineOrAddr.lineNo ==
+		   bp->line_number);
+	}
+      else
+	gotIt = (content[i]->whichElement.source.lineOrAddr.addr
+		 == (Opaque) bp->address);
+      if (gotIt)
+	{
+	  content[i]->whichElement.source.hasBreak = hasBreak;
+	  break;
+	}
+      i++;
+    }
+
+  return;
+}				/* tuiSetHasBreakAt */
+
+
+/*
+** tuiAllSetHasBreakAt().
+**        Set or clear the hasBreak flag in all displayed source windows.
+*/
+void
+#ifdef __STDC__
+tuiAllSetHasBreakAt (
+		      struct breakpoint *bp,
+		      int hasBreak)
+#else
+tuiAllSetHasBreakAt (bp, hasBreak)
+     struct breakpoint *bp;
+     int hasBreak;
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiSetHasBreakAt (bp,
+		      (TuiWinInfoPtr) (sourceWindows ())->list[i], hasBreak);
+
+  return;
+}				/* tuiAllSetHasBreakAt */
+
+
+/*
+** tui_vAllSetHasBreakAt()
+**        Set or clear the hasBreak flag in all displayed source windows,
+**        with params in a va_list
+*/
+void
+#ifdef __STDC__
+tui_vAllSetHasBreakAt (
+			va_list args)
+#else
+tui_vAllSetHasBreakAt (args)
+     va_list args;
+#endif
+{
+  struct breakpoint *bp = va_arg (args, struct breakpoint *);
+  int hasBreak = va_arg (args, int);
+
+  tuiAllSetHasBreakAt (bp, hasBreak);
+
+  return;
+}				/* tui_vAllSetHasBreakAt */
+
+
+
+/*********************************
+** EXECUTION INFO FUNCTIONS        **
+*********************************/
+
+/*
+** tuiSetExecInfoContent().
+**      Function to initialize the content of the execution info window,
+**      based upon the input window which is either the source or
+**      disassembly window.
+*/
+TuiStatus
+#ifdef __STDC__
+tuiSetExecInfoContent (
+			TuiWinInfoPtr winInfo)
+#else
+tuiSetExecInfoContent (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  TuiStatus ret = TUI_SUCCESS;
+
+  if (winInfo->detail.sourceInfo.executionInfo != (TuiGenWinInfoPtr) NULL)
+    {
+      TuiGenWinInfoPtr execInfoPtr = winInfo->detail.sourceInfo.executionInfo;
+
+      if (execInfoPtr->content == (OpaquePtr) NULL)
+	execInfoPtr->content =
+	  (OpaquePtr) allocContent (winInfo->generic.height,
+				    execInfoPtr->type);
+      if (execInfoPtr->content != (OpaquePtr) NULL)
+	{
+	  int i;
+
+	  for (i = 0; i < winInfo->generic.contentSize; i++)
+	    {
+	      TuiWinElementPtr element;
+	      TuiWinElementPtr srcElement;
+
+	      element = (TuiWinElementPtr) execInfoPtr->content[i];
+	      srcElement = (TuiWinElementPtr) winInfo->generic.content[i];
+	      /*
+                ** First check to see if we have a breakpoint that is
+                ** temporary.  If so, and this is our current execution point,
+                ** then clear the break indicator.
+                */
+	      if (srcElement->whichElement.source.hasBreak &&
+		  srcElement->whichElement.source.isExecPoint)
+		{
+		  struct breakpoint *bp;
+		  int found = FALSE;
+		  extern struct breakpoint *breakpoint_chain;
+
+		  for (bp = breakpoint_chain;
+		       (bp != (struct breakpoint *) NULL && !found);
+		       bp = bp->next)
+		    {
+		      found =
+			(winInfo == srcWin &&
+			 bp->line_number ==
+		       srcElement->whichElement.source.lineOrAddr.lineNo) ||
+			(winInfo == disassemWin &&
+			 bp->address == (CORE_ADDR)
+			 srcElement->whichElement.source.lineOrAddr.addr);
+		      if (found)
+			srcElement->whichElement.source.hasBreak =
+			  (bp->disposition != del || bp->hit_count <= 0);
+		    }
+		  if (!found)
+		    srcElement->whichElement.source.hasBreak = FALSE;
+		}
+	      /*
+                ** Now update the exec info content based upon the state
+                ** of each line as indicated by the source content.
+                */
+	      if (srcElement->whichElement.source.hasBreak &&
+		  srcElement->whichElement.source.isExecPoint)
+		element->whichElement.simpleString = breakLocationStr ();
+	      else if (srcElement->whichElement.source.hasBreak)
+		element->whichElement.simpleString = breakStr ();
+	      else if (srcElement->whichElement.source.isExecPoint)
+		element->whichElement.simpleString = locationStr ();
+	      else
+		element->whichElement.simpleString = blankStr ();
+	    }
+	  execInfoPtr->contentSize = winInfo->generic.contentSize;
+	}
+      else
+	ret = TUI_FAILURE;
+    }
+
+  return ret;
+}				/* tuiSetExecInfoContent */
+
+
+/*
+** tuiShowExecInfoContent().
+*/
+void
+#ifdef __STDC__
+tuiShowExecInfoContent (
+			 TuiWinInfoPtr winInfo)
+#else
+tuiShowExecInfoContent (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  TuiGenWinInfoPtr execInfo = winInfo->detail.sourceInfo.executionInfo;
+  int curLine;
+
+  werase (execInfo->handle);
+  tuiRefreshWin (execInfo);
+  for (curLine = 1; (curLine <= execInfo->contentSize); curLine++)
+    mvwaddstr (execInfo->handle,
+	       curLine,
+	       0,
+	       ((TuiWinElementPtr)
+		execInfo->content[curLine - 1])->whichElement.simpleString);
+  tuiRefreshWin (execInfo);
+  execInfo->contentInUse = TRUE;
+
+  return;
+}				/* tuiShowExecInfoContent */
+
+
+/*
+** tuiShowAllExecInfosContent()
+*/
+void
+#ifdef __STDC__
+tuiShowAllExecInfosContent (void)
+#else
+tuiShowAllExecInfosContent ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiShowExecInfoContent ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* tuiShowAllExecInfosContent */
+
+
+/*
+** tuiEraseExecInfoContent().
+*/
+void
+#ifdef __STDC__
+tuiEraseExecInfoContent (
+			  TuiWinInfoPtr winInfo)
+#else
+tuiEraseExecInfoContent (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  TuiGenWinInfoPtr execInfo = winInfo->detail.sourceInfo.executionInfo;
+
+  werase (execInfo->handle);
+  tuiRefreshWin (execInfo);
+
+  return;
+}				/* tuiEraseExecInfoContent */
+
+
+/*
+** tuiEraseAllExecInfosContent()
+*/
+void
+#ifdef __STDC__
+tuiEraseAllExecInfosContent (void)
+#else
+tuiEraseAllExecInfosContent ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiEraseExecInfoContent ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* tuiEraseAllExecInfosContent */
+
+
+/*
+** tuiClearExecInfoContent().
+*/
+void
+#ifdef __STDC__
+tuiClearExecInfoContent (
+			  TuiWinInfoPtr winInfo)
+#else
+tuiClearExecInfoContent (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  winInfo->detail.sourceInfo.executionInfo->contentInUse = FALSE;
+  tuiEraseExecInfoContent (winInfo);
+
+  return;
+}				/* tuiClearExecInfoContent */
+
+
+/*
+** tuiClearAllExecInfosContent()
+*/
+void
+#ifdef __STDC__
+tuiClearAllExecInfosContent (void)
+#else
+tuiClearAllExecInfosContent ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiClearExecInfoContent ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* tuiClearAllExecInfosContent */
+
+
+/*
+** tuiUpdateExecInfo().
+**        Function to update the execution info window
+*/
+void
+#ifdef __STDC__
+tuiUpdateExecInfo (
+		    TuiWinInfoPtr winInfo)
+#else
+tuiUpdateExecInfo (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  tuiSetExecInfoContent (winInfo);
+  tuiShowExecInfoContent (winInfo);
+}				/* tuiUpdateExecInfo
+
+
+/*
+** tuiUpdateAllExecInfos()
+*/
+void
+#ifdef __STDC__
+tuiUpdateAllExecInfos (void)
+#else
+tuiUpdateAllExecInfos ()
+#endif
+{
+  int i;
+
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    tuiUpdateExecInfo ((TuiWinInfoPtr) (sourceWindows ())->list[i]);
+
+  return;
+}				/* tuiUpdateAllExecInfos*/
+
+
+
+/* tuiUpdateOnEnd()
+**       elz: This function clears the execution info from the source windows
+**       and resets the locator to display no line info, procedure info, pc
+**       info.  It is called by stack_publish_stopped_with_no_frame, which
+**       is called then the target terminates execution
+*/
+void
+#ifdef __STDC__
+tuiUpdateOnEnd (void)
+#else
+tuiUpdateOnEnd ()
+#endif
+{
+  int i;
+  TuiGenWinInfoPtr locator;
+  char *filename;
+  TuiWinInfoPtr winInfo;
+
+  locator = locatorWinInfoPtr ();
+
+  /* for all the windows (src, asm) */
+  for (i = 0; i < (sourceWindows ())->count; i++)
+    {
+      winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[i];
+
+      tuiSetIsExecPointAt ((Opaque) - 1, winInfo);	/* the target is'n running */
+      /* -1 should not match any line number or pc */
+      tuiSetExecInfoContent (winInfo);	/*set winInfo so that > is'n displayed*/
+      tuiShowExecInfoContent (winInfo);	/* display the new contents */
+    }
+
+  /*now update the locator*/
+  tuiClearLocatorDisplay ();
+  tuiGetLocatorFilename (locator, &filename);
+  tuiSetLocatorInfo (
+		      filename,
+		      (char *) NULL,
+		      0,
+		      (Opaque) NULL,
+	   &((TuiWinElementPtr) locator->content[0])->whichElement.locator);
+  tuiShowLocatorContent ();
+
+  return;
+}				/* tuiUpdateOnEnd */
+
+
+
+TuiStatus
+#ifdef __STDC__
+tuiAllocSourceBuffer (
+		       TuiWinInfoPtr winInfo)
+#else
+tuiAllocSourceBuffer (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  register char *srcLine, *srcLineBuf;
+  register int i, lineWidth, c, maxLines;
+  TuiStatus ret = TUI_FAILURE;
+
+  maxLines = winInfo->generic.height;	/* less the highlight box */
+  lineWidth = winInfo->generic.width - 1;
+  /*
+    ** Allocate the buffer for the source lines.  Do this only once since they
+    ** will be re-used for all source displays.  The only other time this will
+    ** be done is when a window's size changes.
+    */
+  if (winInfo->generic.content == (OpaquePtr) NULL)
+    {
+      srcLineBuf = (char *) xmalloc ((maxLines * lineWidth) * sizeof (char));
+      if (srcLineBuf == (char *) NULL)
+	fputs_unfiltered (
+	   "Unable to Allocate Memory for Source or Disassembly Display.\n",
+			   gdb_stderr);
+      else
+	{
+	  /* allocate the content list */
+	  if ((winInfo->generic.content =
+	  (OpaquePtr) allocContent (maxLines, SRC_WIN)) == (OpaquePtr) NULL)
+	    {
+	      tuiFree (srcLineBuf);
+	      srcLineBuf = (char *) NULL;
+	      fputs_unfiltered (
+				 "Unable to Allocate Memory for Source or Disassembly Display.\n",
+				 gdb_stderr);
+	    }
+	}
+      for (i = 0; i < maxLines; i++)
+	((TuiWinElementPtr)
+	 winInfo->generic.content[i])->whichElement.source.line =
+	  srcLineBuf + (lineWidth * i);
+      ret = TUI_SUCCESS;
+    }
+  else
+    ret = TUI_SUCCESS;
+
+  return ret;
+}				/* tuiAllocSourceBuffer */
+
+
+/*
+** tuiLineIsDisplayed().
+**      Answer whether the a particular line number or address is displayed
+**      in the current source window.
+*/
+int
+#ifdef __STDC__
+tuiLineIsDisplayed (
+		     Opaque lineNoOrAddr,
+		     TuiWinInfoPtr winInfo,
+		     int checkThreshold)
+#else
+tuiLineIsDisplayed (lineNoOrAddr, winInfo, checkThreshold)
+     Opaque lineNoOrAddr;
+     TuiWinInfoPtr winInfo;
+     int checkThreshold;
+#endif
+{
+  int isDisplayed = FALSE;
+  int i, threshold;
+
+  if (checkThreshold)
+    threshold = SCROLL_THRESHOLD;
+  else
+    threshold = 0;
+  i = 0;
+  while (i < winInfo->generic.contentSize - threshold && !isDisplayed)
+    {
+      if (winInfo == srcWin)
+	isDisplayed = (((TuiWinElementPtr)
+	 winInfo->generic.content[i])->whichElement.source.lineOrAddr.lineNo
+		       == (int) lineNoOrAddr);
+      else
+	isDisplayed = (((TuiWinElementPtr)
+	   winInfo->generic.content[i])->whichElement.source.lineOrAddr.addr
+		       == lineNoOrAddr);
+      i++;
+    }
+
+  return isDisplayed;
+}				/* tuiLineIsDisplayed */
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS               **
+******************************************/
diff --git a/gdb/tui/tuiSourceWin.h b/gdb/tui/tuiSourceWin.h
new file mode 100644
index 0000000..13f3a78
--- /dev/null
+++ b/gdb/tui/tuiSourceWin.h
@@ -0,0 +1,74 @@
+#ifndef _TUI_SOURCEWIN_H
+#define _TUI_SOURCEWIN_H
+/*
+** This header file supports
+*/
+
+
+extern void         tuiDisplayMainFunction PARAMS ((void));
+extern void         tuiUpdateSourceWindow PARAMS 
+                    	((TuiWinInfoPtr, struct symtab *, Opaque, int));
+extern void         tuiUpdateSourceWindowAsIs PARAMS 
+                        ((TuiWinInfoPtr, struct symtab *, Opaque, int));
+extern void         tuiUpdateSourceWindowsWithAddr PARAMS ((Opaque));
+extern void         tui_vUpdateSourceWindowsWithAddr PARAMS ((va_list));
+extern void         tuiUpdateSourceWindowsWithLine PARAMS ((struct symtab *, int));
+extern void         tui_vUpdateSourceWindowsWithLine PARAMS ((va_list));
+extern void         tuiUpdateSourceWindowsFromLocator PARAMS ((void));
+extern void         tuiClearSourceContent PARAMS ((TuiWinInfoPtr, int));
+extern void         tuiClearAllSourceWinsContent PARAMS ((int));
+extern void         tuiEraseSourceContent PARAMS ((TuiWinInfoPtr, int));
+extern void         tuiEraseAllSourceWinsContent PARAMS ((int));
+extern void         tuiSetSourceContentNil PARAMS ((TuiWinInfoPtr, char *));
+extern void         tuiShowSourceContent PARAMS ((TuiWinInfoPtr));
+extern void         tuiShowAllSourceWinsContent PARAMS ((void));
+extern void         tuiHorizontalSourceScroll PARAMS ((TuiWinInfoPtr, TuiScrollDirection, int));
+extern void         tuiUpdateOnEnd PARAMS ((void));
+
+extern TuiStatus    tuiSetExecInfoContent PARAMS ((TuiWinInfoPtr));
+extern void         tuiShowExecInfoContent PARAMS ((TuiWinInfoPtr));
+extern void         tuiShowAllExecInfosContent PARAMS ((void));
+extern void         tuiEraseExecInfoContent PARAMS ((TuiWinInfoPtr));
+extern void         tuiEraseAllExecInfosContent PARAMS ((void));
+extern void         tuiClearExecInfoContent PARAMS ((TuiWinInfoPtr));
+extern void         tuiClearAllExecInfosContent PARAMS ((void));
+extern void         tuiUpdateExecInfo PARAMS ((TuiWinInfoPtr));
+extern void         tuiUpdateAllExecInfos PARAMS ((void));
+
+extern void         tuiSetIsExecPointAt PARAMS ((Opaque, TuiWinInfoPtr));
+extern void         tuiSetHasBreakAt PARAMS ((struct breakpoint *, TuiWinInfoPtr, int));
+extern void         tuiAllSetHasBreakAt PARAMS ((struct breakpoint *, int));
+extern void         tui_vAllSetHasBreakAt PARAMS ((va_list));
+extern TuiStatus    tuiAllocSourceBuffer PARAMS ((TuiWinInfoPtr));
+extern int          tuiLineIsDisplayed PARAMS ((Opaque, TuiWinInfoPtr, int));
+
+
+/*
+** Constant definitions
+*/
+#define        SCROLL_THRESHOLD            2 /* threshold for lazy scroll */
+
+
+/*
+** Macros 
+*/
+#define    m_tuiSetBreakAt(bp, winInfo)       tuiSetHasBreakAt((bp, winInfo, TRUE)
+#define    m_tuiClearBreakAt(bp, winInfo)     tuiSetHasBreakAt(bp, winInfo, FALSE)
+
+#define    m_tuiAllSetBreakAt(bp)             tuiAllSetHasBreakAt(bp, TRUE)
+#define    m_tuiAllClearBreakAt(bp)           tuiAllSetHasBreakAt(bp, FALSE)
+
+#define    m_tuiSrcLineDisplayed(lineNo)      tuiLineIsDisplayed((Opaque)(lineNo), srcWin, FALSE)
+#define    m_tuiSrcAddrDisplayed(addr)        tuiLineIsDisplayed((Opaque)(addr), disassemWin, FALSE)
+#define    m_tuiSrcLineDisplayedWithinThreshold(lineNo) \
+                                            tuiLineIsDisplayed((Opaque)(lineNo), srcWin, TRUE)
+#define    m_tuiSrcAddrDisplayedWithinThreshold(addr) \
+                                            tuiLineIsDisplayed((Opaque)(addr), disassemWin, TRUE)
+#define m_tuiLineDisplayedWithinThreshold(winInfo, lineOrAddr)                                 \
+                                    ( (winInfo == srcWin) ?                                    \
+                                        m_tuiSrcLineDisplayedWithinThreshold(lineOrAddr) :    \
+                                        m_tuiSrcAddrDisplayedWithinThreshold(lineOrAddr) )
+
+
+
+#endif /*_TUI_SOURCEWIN_H */
diff --git a/gdb/tui/tuiStack.c b/gdb/tui/tuiStack.c
new file mode 100644
index 0000000..401dfe2
--- /dev/null
+++ b/gdb/tui/tuiStack.c
@@ -0,0 +1,554 @@
+/*
+** This module contains functions for displaying the locator information in the locator window.
+*/
+
+#include "defs.h"
+#include "symtab.h"
+#include "breakpoint.h"
+#include "frame.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiStack.h"
+#include "tuiSourceWin.h"
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS FORWARD DECLS    **
+******************************************/
+
+static char *_getFuncNameFromFrame PARAMS ((struct frame_info *));
+static void _tuiUpdateLocation_command PARAMS ((char *, int));
+
+
+
+/*****************************************
+** PUBLIC FUNCTION                        **
+******************************************/
+
+/*
+** tuiClearLocatorDisplay()
+*/
+void
+#ifdef __STDC__
+tuiClearLocatorDisplay (void)
+#else
+tuiClearLocatorDisplay ()
+#endif
+{
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+  int i;
+
+  if (locator->handle != (WINDOW *) NULL)
+    {
+      /* No need to werase, since writing a line of
+         * blanks which we do below, is equivalent.
+         */
+      /* werase(locator->handle); */
+      wmove (locator->handle, 0, 0);
+      wstandout (locator->handle);
+      for (i = 0; i < locator->width; i++)
+	waddch (locator->handle, ' ');
+      wstandend (locator->handle);
+      tuiRefreshWin (locator);
+      wmove (locator->handle, 0, 0);
+      locator->contentInUse = FALSE;
+    }
+
+  return;
+}				/* tuiClearLocatorDisplay */
+
+
+/*
+** tuiShowLocatorContent()
+*/
+void
+#ifdef __STDC__
+tuiShowLocatorContent (void)
+#else
+tuiShowLocatorContent ()
+#endif
+{
+  char *string;
+  TuiGenWinInfoPtr locator;
+
+  locator = locatorWinInfoPtr ();
+
+  if (m_genWinPtrNotNull (locator) && locator->handle != (WINDOW *) NULL)
+    {
+      string = displayableWinContentAt (locator, 0);
+      if (string != (char *) NULL)
+	{
+	  wmove (locator->handle, 0, 0);
+	  wstandout (locator->handle);
+	  waddstr (locator->handle, string);
+	  wstandend (locator->handle);
+	  tuiRefreshWin (locator);
+	  wmove (locator->handle, 0, 0);
+	  if (string != nullStr ())
+	    tuiFree (string);
+	  locator->contentInUse = TRUE;
+	}
+    }
+
+  return;
+}				/* tuiShowLocatorContent */
+
+
+/*
+** tuiSetLocatorInfo().
+**        Function to update the locator, with the provided arguments.
+*/
+void
+#ifdef __STDC__
+tuiSetLocatorInfo (
+		    char *fname,
+		    char *procname,
+		    int lineNo,
+		    Opaque addr,
+		    TuiLocatorElementPtr element)
+#else
+tuiSetLocatorInfo (fname, procname, lineNo, addr, element)
+     char *fname;
+     char *procname;
+     int lineNo;
+     Opaque addr;
+     TuiLocatorElementPtr element;
+#endif
+{
+#ifdef COMMENT
+  /* first free the old info */
+  if (element->fileName)
+    tuiFree (element->fileName);
+  if (element->procName)
+    tuiFree (element->procName);
+
+  if (fname == (char *) NULL)
+    element->fileName = fname;
+  else
+    element->fileName = tuiStrDup (fname);
+  if (procname == (char *) NULL)
+    element->procName = procname;
+  else
+    element->procName = tuiStrDup (procname);
+#else
+  element->fileName[0] = (char) 0;
+  element->procName[0] = (char) 0;
+  strcat_to_buf (element->fileName, MAX_LOCATOR_ELEMENT_LEN, fname);
+  strcat_to_buf (element->procName, MAX_LOCATOR_ELEMENT_LEN, procname);
+#endif
+  element->lineNo = lineNo;
+  element->addr = (Opaque) addr;
+
+  return;
+}				/* tuiSetLocatorInfo */
+
+
+/*
+** tuiUpdateLocatorFilename().
+**        Update only the filename portion of the locator.
+*/
+void
+#ifdef __STDC__
+tuiUpdateLocatorFilename (
+			   char *fileName)
+#else
+tuiUpdateLocatorFilename (fileName)
+     char *fileName;
+#endif
+{
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+  if (locator->content[0] == (Opaque) NULL)
+    tuiSetLocatorContent ((struct frame_info *) NULL);
+  ((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName[0] = (char) 0;
+  strcat_to_buf (((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName,
+		 MAX_LOCATOR_ELEMENT_LEN,
+		 fileName);
+
+  tuiShowLocatorContent ();
+
+  return;
+}				/* tuiUpdateLocatorFilename */
+
+
+/*
+** tui_vUpdateLocatorFilename().
+**        Update only the filename portion of the locator with args in a va_list.
+*/
+void
+#ifdef __STDC__
+tui_vUpdateLocatorFilename (
+			     va_list args)
+#else
+tui_vUpdateLocatorFilename (args)
+     va_list args;
+#endif
+{
+  char *fileName;
+
+  fileName = va_arg (args, char *);
+  tuiUpdateLocatorFilename (fileName);
+
+  return;
+}				/* tui_vUpdateLocatorFilename */
+
+
+/*
+** tuiSwitchFilename().
+**   Update the filename portion of the locator. Clear the other info in locator.
+** (elz)
+*/
+void
+#ifdef __STDC__
+tuiSwitchFilename (
+		    char *fileName)
+#else
+tuiSwitchFilename (fileName)
+     char *fileName;
+#endif
+{
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+
+  if (locator->content[0] == (Opaque) NULL)
+    tuiSetLocatorContent ((struct frame_info *) NULL);
+  ((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName[0] = (char) 0;
+
+  tuiSetLocatorInfo (fileName,
+		     (char *) NULL,
+		     0,
+		     (Opaque) NULL,
+	   &((TuiWinElementPtr) locator->content[0])->whichElement.locator);
+
+  tuiShowLocatorContent ();
+
+  return;
+}				/* tuiSwitchFilename */
+
+
+/*
+** tuiGetLocatorFilename().
+**   Get the filename portion of the locator.
+** (elz)
+*/
+void
+#ifdef __STDC__
+tuiGetLocatorFilename (
+			TuiGenWinInfoPtr locator,
+			char **filename)
+#else
+tuiGetLocatorFilename (locator, filename)
+     TuiGenWinInfoPtr locator;
+     char **filename;
+#endif
+{
+
+  /* the current filename could be non known, in which case the xmalloc would
+     allocate no memory, because the length would be 0 */
+  if (((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName)
+    {
+      int name_length =
+      strlen (((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName);
+
+      (*filename) = (char *) xmalloc (name_length + 1);
+      strcpy ((*filename),
+	      ((TuiWinElementPtr) locator->content[0])->whichElement.locator.fileName);
+    }
+
+  return;
+}				/* tuiGetLocatorFilename */
+
+
+/*
+** tuiUpdateLocatorInfoFromFrame().
+**        Function to update the locator, with the information extracted from frameInfo
+*/
+void
+#ifdef __STDC__
+tuiUpdateLocatorInfoFromFrame (
+				struct frame_info *frameInfo,
+				TuiLocatorElementPtr element)
+#else
+tuiUpdateLocatorInfoFromFrame (frameInfo, element)
+     struct frame_info *frameInfo;
+     TuiLocatorElementPtr element;
+#endif
+{
+  struct symtab_and_line symtabAndLine;
+
+  /* now get the new info */
+  symtabAndLine = find_pc_line (frameInfo->pc,
+			   (frameInfo->next != (struct frame_info *) NULL &&
+			    !frameInfo->next->signal_handler_caller &&
+			    !frame_in_dummy (frameInfo->next)));
+  if (symtabAndLine.symtab && symtabAndLine.symtab->filename)
+    tuiSetLocatorInfo (symtabAndLine.symtab->filename,
+		       _getFuncNameFromFrame (frameInfo),
+		       symtabAndLine.line,
+		       (Opaque) frameInfo->pc,
+		       element);
+  else
+    tuiSetLocatorInfo ((char *) NULL,
+		       _getFuncNameFromFrame (frameInfo),
+		       0,
+		       (Opaque) frameInfo->pc,
+		       element);
+
+  return;
+}				/* tuiUpdateLocatorInfoFromFrame */
+
+
+/*
+** tuiSetLocatorContent().
+**        Function to set the content of the locator
+*/
+void
+#ifdef __STDC__
+tuiSetLocatorContent (
+		       struct frame_info *frameInfo)
+#else
+tuiSetLocatorContent (frameInfo)
+     struct frame_info *frameInfo;
+#endif
+{
+  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+  TuiWinElementPtr element;
+  struct symtab_and_line symtabAndLine;
+
+  /* Allocate the element if necessary */
+  if (locator->contentSize <= 0)
+    {
+      TuiWinContent contentPtr;
+
+      if ((locator->content = (OpaquePtr) allocContent (1, locator->type)) == (OpaquePtr) NULL)
+	error ("Unable to Allocate Memory to Display Location.");
+      locator->contentSize = 1;
+    }
+
+  if (frameInfo != (struct frame_info *) NULL)
+    tuiUpdateLocatorInfoFromFrame (frameInfo,
+	   &((TuiWinElementPtr) locator->content[0])->whichElement.locator);
+  else
+    tuiSetLocatorInfo ((char *) NULL,
+		       (char *) NULL,
+		       0,
+		       (Opaque) NULL,
+	   &((TuiWinElementPtr) locator->content[0])->whichElement.locator);
+  return;
+}				/* tuiSetLocatorContent */
+
+
+/*
+** tuiUpdateLocatorDisplay().
+**        Function to update the locator display
+*/
+void
+#ifdef __STDC__
+tuiUpdateLocatorDisplay (
+			  struct frame_info *frameInfo)
+#else
+tuiUpdateLocatorDisplay (frameInfo)
+     struct frame_info *frameInfo;
+#endif
+{
+  tuiClearLocatorDisplay ();
+  tuiSetLocatorContent (frameInfo);
+  tuiShowLocatorContent ();
+
+  return;
+}				/* tuiUpdateLocatorDisplay */
+
+
+/*
+** tuiShowFrameInfo().
+**        Function to print the frame inforrmation for the TUI.
+*/
+void
+#ifdef __STDC__
+tuiShowFrameInfo (
+		   struct frame_info *fi)
+#else
+tuiShowFrameInfo (fi)
+     struct frame_info *fi;
+#endif
+{
+  TuiWinInfoPtr winInfo;
+  register int i;
+
+  if (fi)
+    {
+      register int startLine, i;
+      register struct symtab *s;
+      CORE_ADDR low;
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+      int sourceAlreadyDisplayed;
+
+
+      s = find_pc_symtab (fi->pc);
+      sourceAlreadyDisplayed = tuiSourceIsDisplayed (s->filename);
+      tuiUpdateLocatorDisplay (fi);
+      for (i = 0; i < (sourceWindows ())->count; i++)
+	{
+	  winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[i];
+	  if (winInfo == srcWin)
+	    {
+	      startLine =
+		(((TuiWinElementPtr) locator->content[0])->whichElement.locator.lineNo -
+		 (winInfo->generic.viewportHeight / 2)) + 1;
+	      if (startLine <= 0)
+		startLine = 1;
+	    }
+	  else
+	    {
+	      if (find_pc_partial_function (fi->pc, (char **) NULL, &low, (CORE_ADDR) NULL) == 0)
+		error ("No function contains program counter for selected frame.\n");
+	      else
+		low = (CORE_ADDR) tuiGetLowDisassemblyAddress ((Opaque) low, (Opaque) fi->pc);
+	    }
+
+	  if (winInfo == srcWin)
+	    {
+	      if (!(sourceAlreadyDisplayed && m_tuiLineDisplayedWithinThreshold (
+								    winInfo,
+										  ((TuiWinElementPtr) locator->content[0])->whichElement.locator.lineNo)))
+		tuiUpdateSourceWindow (winInfo, s, (Opaque) startLine, TRUE);
+	      else
+		tuiSetIsExecPointAt ((Opaque)
+				     ((TuiWinElementPtr) locator->content[0])->whichElement.locator.lineNo,
+				     winInfo);
+	    }
+	  else
+	    {
+	      if (winInfo == disassemWin)
+		{
+		  if (!m_tuiLineDisplayedWithinThreshold (winInfo,
+							  ((TuiWinElementPtr) locator->content[0])->whichElement.locator.addr))
+		    tuiUpdateSourceWindow (winInfo, s, (Opaque) low, TRUE);
+		  else
+		    tuiSetIsExecPointAt ((Opaque)
+					 ((TuiWinElementPtr) locator->content[0])->whichElement.locator.addr,
+					 winInfo);
+		}
+	    }
+	  tuiUpdateExecInfo (winInfo);
+	}
+    }
+  else
+    {
+      tuiUpdateLocatorDisplay (fi);
+      for (i = 0; i < (sourceWindows ())->count; i++)
+	{
+	  winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[i];
+	  tuiClearSourceContent (winInfo, EMPTY_SOURCE_PROMPT);
+	  tuiUpdateExecInfo (winInfo);
+	}
+    }
+
+  return;
+}				/* tuiShowFrameInfo */
+
+
+/*
+** tui_vShowFrameInfo().
+**        Function to print the frame inforrmation for the TUI with args in a va_list.
+*/
+void
+#ifdef __STDC__
+tui_vShowFrameInfo (
+		     va_list args)
+#else
+tui_vShowFrameInfo (args)
+     va_list args;
+#endif
+{
+  struct frame_info *fi;
+
+  fi = va_arg (args, struct frame_info *);
+  tuiShowFrameInfo (fi);
+
+  return;
+}				/* tui_vShowFrameInfo */
+
+
+/*
+** _initialize_tuiStack().
+**      Function to initialize gdb commands, for tui window stack manipulation.
+*/
+void
+_initialize_tuiStack ()
+{
+  if (tui_version)
+    {
+      add_com ("update", class_tui, _tuiUpdateLocation_command,
+	       "Update the source window and locator to display the current execution point.\n");
+    }
+
+  return;
+}				/* _initialize_tuiStack */
+
+
+/*****************************************
+** STATIC LOCAL FUNCTIONS                 **
+******************************************/
+
+/*
+**    _getFuncNameFromFrame().
+*/
+static char *
+#ifdef __STDC__
+_getFuncNameFromFrame (
+			struct frame_info *frameInfo)
+#else
+_getFuncNameFromFrame (frameInfo)
+     struct frame_info *frameInfo;
+#endif
+{
+  char *funcName = (char *) NULL;
+
+  find_pc_partial_function (frameInfo->pc,
+			    &funcName,
+			    (CORE_ADDR *) NULL,
+			    (CORE_ADDR *) NULL);
+  return funcName;
+}				/* _getFuncNameFromFrame */
+
+
+/*
+** _tuiUpdateLocation_command().
+**        Command to update the display with the current execution point
+*/
+static void
+#ifdef __STDC__
+_tuiUpdateLocation_command (
+			     char *arg,
+			     int fromTTY)
+#else
+_tuiUpdateLocation_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+#ifndef TRY
+  extern void frame_command PARAMS ((char *, int));
+  frame_command ("0", FALSE);
+#else
+  struct frame_info *curFrame;
+
+  /* Obtain the current execution point */
+  if ((curFrame = get_current_frame ()) != (struct frame_info *) NULL)
+    {
+      struct frame_info *frame;
+      int curLevel = 0;
+
+      for (frame = get_prev_frame (curLevel);
+	   (frame != (struct frame_info *) NULL && (frame != curFrame));
+	   frame = get_prev_frame (frame))
+	curLevel++;
+
+      if (curFrame != (struct frame_info *) NULL)
+	print_frame_info (frame, curLevel, 0, 1);
+    }
+#endif
+
+  return;
+}				/* _tuiUpdateLocation_command */
diff --git a/gdb/tui/tuiStack.h b/gdb/tui/tuiStack.h
new file mode 100644
index 0000000..20e9a92
--- /dev/null
+++ b/gdb/tui/tuiStack.h
@@ -0,0 +1,22 @@
+#ifndef _TUI_STACK_H
+#define _TUI_STACK_H
+/*
+** This header file supports
+*/
+
+extern void         tuiSetLocatorInfo PARAMS ((char *, char *, int, Opaque, TuiLocatorElementPtr));
+extern void         tuiUpdateLocatorFilename PARAMS ((char *));
+extern void         tui_vUpdateLocatorFilename PARAMS ((va_list));
+extern void         tuiUpdateLocatorInfoFromFrame 
+                        PARAMS ((struct frame_info *, TuiLocatorElementPtr));
+extern void         tuiUpdateLocatorDisplay PARAMS ((struct frame_info *));
+extern void         tuiSetLocatorContent PARAMS ((struct frame_info *));
+extern void         tuiShowLocatorContent PARAMS ((void));
+extern void         tuiClearLocatorContent PARAMS ((void));
+extern void         tuiSwitchFilename PARAMS ((char *));
+extern void         tuiShowFrameInfo PARAMS ((struct frame_info *));
+extern void         tui_vShowFrameInfo PARAMS ((va_list));
+extern void         tuiGetLocatorFilename PARAMS ((TuiGenWinInfoPtr, char **));
+
+
+#endif /*_TUI_STACK_H*/
diff --git a/gdb/tui/tuiWin.c b/gdb/tui/tuiWin.c
new file mode 100644
index 0000000..45bb0f6
--- /dev/null
+++ b/gdb/tui/tuiWin.c
@@ -0,0 +1,1650 @@
+/*
+** tuiWin.c
+**    This module contains procedures for handling tui window functions
+**    like resize, scrolling, scrolling, changing focus, etc.
+**
+** Author: Susan B. Macchia
+*/
+
+
+#include <string.h>
+#include "defs.h"
+#include "command.h"
+#include "symtab.h"
+#include "breakpoint.h"
+#include "frame.h"
+
+#include "tui.h"
+#include "tuiData.h"
+#include "tuiGeneralWin.h"
+#include "tuiStack.h"
+#include "tuiSourceWin.h"
+#include "tuiDataWin.h"
+
+/*******************************
+** External Declarations
+********************************/
+extern void init_page_info ();
+
+/*******************************
+** Static Local Decls
+********************************/
+static void _makeVisibleWithNewHeight PARAMS ((TuiWinInfoPtr));
+static void _makeInvisibleAndSetNewHeight PARAMS ((TuiWinInfoPtr, int));
+static TuiStatus _tuiAdjustWinHeights PARAMS ((TuiWinInfoPtr, int));
+static int _newHeightOk PARAMS ((TuiWinInfoPtr, int));
+static void _tuiSetTabWidth_command PARAMS ((char *, int));
+static void _tuiRefreshAll_command PARAMS ((char *, int));
+static void _tuiSetWinHeight_command PARAMS ((char *, int));
+static void _tuiXDBsetWinHeight_command PARAMS ((char *, int));
+static void _tuiAllWindowsInfo PARAMS ((char *, int));
+static void _tuiSetFocus_command PARAMS ((char *, int));
+static void _tuiScrollForward_command PARAMS ((char *, int));
+static void _tuiScrollBackward_command PARAMS ((char *, int));
+static void _tuiScrollLeft_command PARAMS ((char *, int));
+static void _tuiScrollRight_command PARAMS ((char *, int));
+static void _parseScrollingArgs PARAMS ((char *, TuiWinInfoPtr *, int *));
+
+
+/***************************************
+** DEFINITIONS
+***************************************/
+#define WIN_HEIGHT_USAGE      "Usage: winheight <win_name> [+ | -] <#lines>\n"
+#define XDBWIN_HEIGHT_USAGE   "Usage: w <#lines>\n"
+#define FOCUS_USAGE           "Usage: focus {<win> | next | prev}\n"
+
+/***************************************
+** PUBLIC FUNCTIONS
+***************************************/
+
+/*
+** _initialize_tuiWin().
+**        Function to initialize gdb commands, for tui window manipulation.
+*/
+void
+_initialize_tuiWin ()
+{
+  if (tui_version)
+    {
+      add_com ("refresh", class_tui, _tuiRefreshAll_command,
+	       "Refresh the terminal display.\n");
+      if (xdb_commands)
+	add_com_alias ("U", "refresh", class_tui, 0);
+      add_com ("tabset", class_tui, _tuiSetTabWidth_command,
+	       "Set the width (in characters) of tab stops.\n\
+Usage: tabset <n>\n");
+      add_com ("winheight", class_tui, _tuiSetWinHeight_command,
+	       "Set the height of a specified window.\n\
+Usage: winheight <win_name> [+ | -] <#lines>\n\
+Window names are:\n\
+src  : the source window\n\
+cmd  : the command window\n\
+asm  : the disassembly window\n\
+regs : the register display\n");
+      add_com_alias ("wh", "winheight", class_tui, 0);
+      add_info ("win", _tuiAllWindowsInfo,
+		"List of all displayed windows.\n");
+      add_com ("focus", class_tui, _tuiSetFocus_command,
+	       "Set focus to named window or next/prev window.\n\
+Usage: focus {<win> | next | prev}\n\
+Valid Window names are:\n\
+src  : the source window\n\
+asm  : the disassembly window\n\
+regs : the register display\n\
+cmd  : the command window\n");
+      add_com_alias ("fs", "focus", class_tui, 0);
+      add_com ("+", class_tui, _tuiScrollForward_command,
+	       "Scroll window forward.\nUsage: + [win] [n]\n");
+      add_com ("-", class_tui, _tuiScrollBackward_command,
+	       "Scroll window backward.\nUsage: - [win] [n]\n");
+      add_com ("<", class_tui, _tuiScrollLeft_command,
+	       "Scroll window forward.\nUsage: < [win] [n]\n");
+      add_com (">", class_tui, _tuiScrollRight_command,
+	       "Scroll window backward.\nUsage: > [win] [n]\n");
+      if (xdb_commands)
+	add_com ("w", class_xdb, _tuiXDBsetWinHeight_command,
+		 "XDB compatibility command for setting the height of a command window.\n\
+Usage: w <#lines>\n");
+    }
+
+  return;
+}				/* _intialize_tuiWin */
+
+
+/*
+** tuiClearWinFocusFrom
+**        Clear the logical focus from winInfo
+*/
+void
+#ifdef __STDC__
+tuiClearWinFocusFrom (
+		       TuiWinInfoPtr winInfo)
+#else
+tuiClearWinFocusFrom (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo))
+    {
+      if (winInfo->generic.type != CMD_WIN)
+	unhighlightWin (winInfo);
+      tuiSetWinWithFocus ((TuiWinInfoPtr) NULL);
+    }
+
+  return;
+}				/* tuiClearWinFocusFrom */
+
+
+/*
+** tuiClearWinFocus().
+**        Clear the window that has focus.
+*/
+void
+#ifdef __STDC__
+tuiClearWinFocus (void)
+#else
+tuiClearWinFocus ()
+#endif
+{
+  tuiClearWinFocusFrom (tuiWinWithFocus ());
+
+  return;
+}				/* tuiClearWinFocus */
+
+
+/*
+** tuiSetWinFocusTo
+**        Set the logical focus to winInfo
+*/
+void
+#ifdef __STDC__
+tuiSetWinFocusTo (
+		   TuiWinInfoPtr winInfo)
+#else
+tuiSetWinFocusTo (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  if (m_winPtrNotNull (winInfo))
+    {
+      TuiWinInfoPtr winWithFocus = tuiWinWithFocus ();
+
+      if (m_winPtrNotNull (winWithFocus) &&
+	  winWithFocus->generic.type != CMD_WIN)
+	unhighlightWin (winWithFocus);
+      tuiSetWinWithFocus (winInfo);
+      if (winInfo->generic.type != CMD_WIN)
+	highlightWin (winInfo);
+    }
+
+  return;
+}				/* tuiSetWinFocusTo */
+
+
+char *
+#ifdef __STDC__
+tuiStrDup (
+	    char *str)
+#else
+tuiStrDup (str)
+     char *str;
+#endif
+{
+  char *newStr = (char *) NULL;
+
+  if (str != (char *) NULL)
+    {
+      newStr = (char *) xmalloc (strlen (str) + 1);
+      strcpy (newStr, str);
+    }
+
+  return newStr;
+}				/* tuiStrDup */
+
+
+/*
+** tuiScrollForward().
+*/
+void
+#ifdef __STDC__
+tuiScrollForward (
+		   TuiWinInfoPtr winToScroll,
+		   int numToScroll)
+#else
+tuiScrollForward (winToScroll, numToScroll)
+     TuiWinInfoPtr winToScroll;
+     int numToScroll;
+#endif
+{
+  if (winToScroll != cmdWin)
+    {
+      int _numToScroll = numToScroll;
+
+      if (numToScroll == 0)
+	_numToScroll = winToScroll->generic.height - 3;
+      /*
+        ** If we are scrolling the source or disassembly window, do a
+        ** "psuedo" scroll since not all of the source is in memory,
+        ** only what is in the viewport.  If winToScroll is the
+        ** command window do nothing since the term should handle it.
+        */
+      if (winToScroll == srcWin)
+	tuiVerticalSourceScroll (FORWARD_SCROLL, _numToScroll);
+      else if (winToScroll == disassemWin)
+	tuiVerticalDisassemScroll (FORWARD_SCROLL, _numToScroll);
+      else if (winToScroll == dataWin)
+	tuiVerticalDataScroll (FORWARD_SCROLL, _numToScroll);
+    }
+
+  return;
+}				/* tuiScrollForward */
+
+
+/*
+** tuiScrollBackward().
+*/
+void
+#ifdef __STDC__
+tuiScrollBackward (
+		    TuiWinInfoPtr winToScroll,
+		    int numToScroll)
+#else
+tuiScrollBackward (winToScroll, numToScroll)
+     TuiWinInfoPtr winToScroll;
+     int numToScroll;
+#endif
+{
+  if (winToScroll != cmdWin)
+    {
+      int _numToScroll = numToScroll;
+
+      if (numToScroll == 0)
+	_numToScroll = winToScroll->generic.height - 3;
+      /*
+        ** If we are scrolling the source or disassembly window, do a
+        ** "psuedo" scroll since not all of the source is in memory,
+        ** only what is in the viewport.  If winToScroll is the
+        ** command window do nothing since the term should handle it.
+        */
+      if (winToScroll == srcWin)
+	tuiVerticalSourceScroll (BACKWARD_SCROLL, _numToScroll);
+      else if (winToScroll == disassemWin)
+	tuiVerticalDisassemScroll (BACKWARD_SCROLL, _numToScroll);
+      else if (winToScroll == dataWin)
+	tuiVerticalDataScroll (BACKWARD_SCROLL, _numToScroll);
+    }
+  return;
+}				/* tuiScrollBackward */
+
+
+/*
+** tuiScrollLeft().
+*/
+void
+#ifdef __STDC__
+tuiScrollLeft (
+		TuiWinInfoPtr winToScroll,
+		int numToScroll)
+#else
+tuiScrollLeft (winToScroll, numToScroll)
+     TuiWinInfoPtr winToScroll;
+     int numToScroll;
+#endif
+{
+  if (winToScroll != cmdWin)
+    {
+      int _numToScroll = numToScroll;
+
+      if (_numToScroll == 0)
+	_numToScroll = 1;
+      /*
+        ** If we are scrolling the source or disassembly window, do a
+        ** "psuedo" scroll since not all of the source is in memory,
+        ** only what is in the viewport. If winToScroll is the
+        ** command window do nothing since the term should handle it.
+        */
+      if (winToScroll == srcWin || winToScroll == disassemWin)
+	tuiHorizontalSourceScroll (winToScroll, LEFT_SCROLL, _numToScroll);
+    }
+  return;
+}				/* tuiScrollLeft */
+
+
+/*
+** tuiScrollRight().
+*/
+void
+#ifdef __STDC__
+tuiScrollRight (
+		 TuiWinInfoPtr winToScroll,
+		 int numToScroll)
+#else
+tuiScrollRight (winToScroll, numToScroll)
+     TuiWinInfoPtr winToScroll;
+     int numToScroll;
+#endif
+{
+  if (winToScroll != cmdWin)
+    {
+      int _numToScroll = numToScroll;
+
+      if (_numToScroll == 0)
+	_numToScroll = 1;
+      /*
+        ** If we are scrolling the source or disassembly window, do a
+        ** "psuedo" scroll since not all of the source is in memory,
+        ** only what is in the viewport. If winToScroll is the
+        ** command window do nothing since the term should handle it.
+        */
+      if (winToScroll == srcWin || winToScroll == disassemWin)
+	tuiHorizontalSourceScroll (winToScroll, RIGHT_SCROLL, _numToScroll);
+    }
+  return;
+}				/* tuiScrollRight */
+
+
+/*
+** tui_vScroll().
+**    Scroll a window.  Arguments are passed through a va_list.
+*/
+void
+#ifdef __STDC__
+tui_vScroll (
+	      va_list args)
+#else
+tui_vScroll (args)
+     va_list args;
+#endif
+{
+  TuiScrollDirection direction = va_arg (args, TuiScrollDirection);
+  TuiWinInfoPtr winToScroll = va_arg (args, TuiWinInfoPtr);
+  int numToScroll = va_arg (args, int);
+
+  switch (direction)
+    {
+    case FORWARD_SCROLL:
+      tuiScrollForward (winToScroll, numToScroll);
+      break;
+    case BACKWARD_SCROLL:
+      tuiScrollBackward (winToScroll, numToScroll);
+      break;
+    case LEFT_SCROLL:
+      tuiScrollLeft (winToScroll, numToScroll);
+      break;
+    case RIGHT_SCROLL:
+      tuiScrollRight (winToScroll, numToScroll);
+      break;
+    default:
+      break;
+    }
+
+  return;
+}				/* tui_vScroll */
+
+
+/*
+** tuiRefreshAll().
+*/
+void
+#ifdef __STDC__
+tuiRefreshAll (void)
+#else
+tuiRefreshAll ()
+#endif
+{
+  TuiWinType type;
+
+  refreshAll (winList);
+  for (type = SRC_WIN; type < MAX_MAJOR_WINDOWS; type++)
+    {
+      if (winList[type]->generic.isVisible)
+	{
+	  switch (type)
+	    {
+	    case SRC_WIN:
+	    case DISASSEM_WIN:
+	      tuiClearWin (&winList[type]->generic);
+	      if (winList[type]->detail.sourceInfo.hasLocator)
+		tuiClearLocatorDisplay ();
+	      tuiShowSourceContent (winList[type]);
+	      checkAndDisplayHighlightIfNeeded (winList[type]);
+	      tuiEraseExecInfoContent (winList[type]);
+	      tuiUpdateExecInfo (winList[type]);
+	      break;
+	    case DATA_WIN:
+	      tuiRefreshDataWin ();
+	      break;
+	    default:
+	      break;
+	    }
+	}
+    }
+  tuiClearLocatorDisplay ();
+  tuiShowLocatorContent ();
+
+  return;
+}				/* tuiRefreshAll */
+
+
+/*
+** tuiResizeAll().
+**      Resize all the windows based on the the terminal size.  This
+**      function gets called from within the readline sinwinch handler.
+*/
+void
+#ifdef __STDC__
+tuiResizeAll (void)
+#else
+tuiResizeAll ()
+#endif
+{
+  int heightDiff, widthDiff;
+  extern int screenheight, screenwidth;	/* in readline */
+
+  widthDiff = screenwidth - termWidth ();
+  heightDiff = screenheight - termHeight ();
+  if (heightDiff || widthDiff)
+    {
+      TuiLayoutType curLayout = currentLayout ();
+      TuiWinInfoPtr winWithFocus = tuiWinWithFocus ();
+      TuiWinInfoPtr firstWin, secondWin;
+      TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+      TuiWinType winType;
+      int i, newHeight, splitDiff, cmdSplitDiff, numWinsDisplayed = 2;
+
+      /* turn keypad off while we resize */
+      if (winWithFocus != cmdWin)
+	keypad (cmdWin->generic.handle, FALSE);
+      init_page_info ();
+      setTermHeightTo (screenheight);
+      setTermWidthTo (screenwidth);
+      if (curLayout == SRC_DISASSEM_COMMAND ||
+	curLayout == SRC_DATA_COMMAND || curLayout == DISASSEM_DATA_COMMAND)
+	numWinsDisplayed++;
+      splitDiff = heightDiff / numWinsDisplayed;
+      cmdSplitDiff = splitDiff;
+      if (heightDiff % numWinsDisplayed)
+	{
+	  if (heightDiff < 0)
+	    cmdSplitDiff--;
+	  else
+	    cmdSplitDiff++;
+	}
+      /* now adjust each window */
+      clear ();
+      refresh ();
+      switch (curLayout)
+	{
+	case SRC_COMMAND:
+	case DISASSEM_COMMAND:
+	  firstWin = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+	  firstWin->generic.width += widthDiff;
+	  locator->width += widthDiff;
+	  /* check for invalid heights */
+	  if (heightDiff == 0)
+	    newHeight = firstWin->generic.height;
+	  else if ((firstWin->generic.height + splitDiff) >=
+		   (screenheight - MIN_CMD_WIN_HEIGHT - 1))
+	    newHeight = screenheight - MIN_CMD_WIN_HEIGHT - 1;
+	  else if ((firstWin->generic.height + splitDiff) <= 0)
+	    newHeight = MIN_WIN_HEIGHT;
+	  else
+	    newHeight = firstWin->generic.height + splitDiff;
+
+	  _makeInvisibleAndSetNewHeight (firstWin, newHeight);
+	  cmdWin->generic.origin.y = locator->origin.y + 1;
+	  cmdWin->generic.width += widthDiff;
+	  newHeight = screenheight - cmdWin->generic.origin.y;
+	  _makeInvisibleAndSetNewHeight (cmdWin, newHeight);
+	  _makeVisibleWithNewHeight (firstWin);
+	  _makeVisibleWithNewHeight (cmdWin);
+	  if (firstWin->generic.contentSize <= 0)
+	    tuiEraseSourceContent (firstWin, EMPTY_SOURCE_PROMPT);
+	  break;
+	default:
+	  if (curLayout == SRC_DISASSEM_COMMAND)
+	    {
+	      firstWin = srcWin;
+	      firstWin->generic.width += widthDiff;
+	      secondWin = disassemWin;
+	      secondWin->generic.width += widthDiff;
+	    }
+	  else
+	    {
+	      firstWin = dataWin;
+	      firstWin->generic.width += widthDiff;
+	      secondWin = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+	      secondWin->generic.width += widthDiff;
+	    }
+	  /* Change the first window's height/width */
+	  /* check for invalid heights */
+	  if (heightDiff == 0)
+	    newHeight = firstWin->generic.height;
+	  else if ((firstWin->generic.height +
+		    secondWin->generic.height + (splitDiff * 2)) >=
+		   (screenheight - MIN_CMD_WIN_HEIGHT - 1))
+	    newHeight = (screenheight - MIN_CMD_WIN_HEIGHT - 1) / 2;
+	  else if ((firstWin->generic.height + splitDiff) <= 0)
+	    newHeight = MIN_WIN_HEIGHT;
+	  else
+	    newHeight = firstWin->generic.height + splitDiff;
+	  _makeInvisibleAndSetNewHeight (firstWin, newHeight);
+
+	  if (firstWin == dataWin && widthDiff != 0)
+	    firstWin->detail.dataDisplayInfo.regsColumnCount =
+	      tuiCalculateRegsColumnCount (
+			  firstWin->detail.dataDisplayInfo.regsDisplayType);
+	  locator->width += widthDiff;
+
+	  /* Change the second window's height/width */
+	  /* check for invalid heights */
+	  if (heightDiff == 0)
+	    newHeight = secondWin->generic.height;
+	  else if ((firstWin->generic.height +
+		    secondWin->generic.height + (splitDiff * 2)) >=
+		   (screenheight - MIN_CMD_WIN_HEIGHT - 1))
+	    {
+	      newHeight = screenheight - MIN_CMD_WIN_HEIGHT - 1;
+	      if (newHeight % 2)
+		newHeight = (newHeight / 2) + 1;
+	      else
+		newHeight /= 2;
+	    }
+	  else if ((secondWin->generic.height + splitDiff) <= 0)
+	    newHeight = MIN_WIN_HEIGHT;
+	  else
+	    newHeight = secondWin->generic.height + splitDiff;
+	  secondWin->generic.origin.y = firstWin->generic.height - 1;
+	  _makeInvisibleAndSetNewHeight (secondWin, newHeight);
+
+	  /* Change the command window's height/width */
+	  cmdWin->generic.origin.y = locator->origin.y + 1;
+	  _makeInvisibleAndSetNewHeight (
+			     cmdWin, cmdWin->generic.height + cmdSplitDiff);
+	  _makeVisibleWithNewHeight (firstWin);
+	  _makeVisibleWithNewHeight (secondWin);
+	  _makeVisibleWithNewHeight (cmdWin);
+	  if (firstWin->generic.contentSize <= 0)
+	    tuiEraseSourceContent (firstWin, EMPTY_SOURCE_PROMPT);
+	  if (secondWin->generic.contentSize <= 0)
+	    tuiEraseSourceContent (secondWin, EMPTY_SOURCE_PROMPT);
+	  break;
+	}
+      /*
+        ** Now remove all invisible windows, and their content so that they get
+        ** created again when called for with the new size
+        */
+      for (winType = SRC_WIN; (winType < MAX_MAJOR_WINDOWS); winType++)
+	{
+	  if (winType != CMD_WIN && m_winPtrNotNull (winList[winType]) &&
+	      !winList[winType]->generic.isVisible)
+	    {
+	      freeWindow (winList[winType]);
+	      winList[winType] = (TuiWinInfoPtr) NULL;
+	    }
+	}
+      tuiSetWinResizedTo (TRUE);
+      /* turn keypad back on, unless focus is in the command window */
+      if (winWithFocus != cmdWin)
+	keypad (cmdWin->generic.handle, TRUE);
+    }
+  return;
+}				/* tuiResizeAll */
+
+
+/*
+** tuiSigwinchHandler()
+**    SIGWINCH signal handler for the tui.  This signal handler is
+**    always called, even when the readline package clears signals
+**    because it is set as the old_sigwinch() (TUI only)
+*/
+void
+#ifdef __STDC__
+tuiSigwinchHandler (
+		     int signal)
+#else
+tuiSigwinchHandler (signal)
+     int signal;
+#endif
+{
+  /*
+    ** Say that a resize was done so that the readline can do it
+    ** later when appropriate.
+    */
+  tuiSetWinResizedTo (TRUE);
+
+  return;
+}				/* tuiSigwinchHandler */
+
+
+
+/*************************
+** STATIC LOCAL FUNCTIONS
+**************************/
+
+
+/*
+** _tuiScrollForward_command().
+*/
+static void
+#ifdef __STDC__
+_tuiScrollForward_command (
+			    char *arg,
+			    int fromTTY)
+#else
+_tuiScrollForward_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  int numToScroll = 1;
+  TuiWinInfoPtr winToScroll;
+
+  if (arg == (char *) NULL)
+    _parseScrollingArgs (arg, &winToScroll, (int *) NULL);
+  else
+    _parseScrollingArgs (arg, &winToScroll, &numToScroll);
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll,
+	 FORWARD_SCROLL,
+	 winToScroll,
+	 numToScroll);
+
+  return;
+}				/* _tuiScrollForward_command */
+
+
+/*
+** _tuiScrollBackward_command().
+*/
+static void
+#ifdef __STDC__
+_tuiScrollBackward_command (
+			     char *arg,
+			     int fromTTY)
+#else
+_tuiScrollBackward_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  int numToScroll = 1;
+  TuiWinInfoPtr winToScroll;
+
+  if (arg == (char *) NULL)
+    _parseScrollingArgs (arg, &winToScroll, (int *) NULL);
+  else
+    _parseScrollingArgs (arg, &winToScroll, &numToScroll);
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll,
+	 BACKWARD_SCROLL,
+	 winToScroll,
+	 numToScroll);
+
+  return;
+}				/* _tuiScrollBackward_command */
+
+
+/*
+** _tuiScrollLeft_command().
+*/
+static void
+#ifdef __STDC__
+_tuiScrollLeft_command (
+			 char *arg,
+			 int fromTTY)
+#else
+_tuiScrollLeft_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  int numToScroll;
+  TuiWinInfoPtr winToScroll;
+
+  _parseScrollingArgs (arg, &winToScroll, &numToScroll);
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll,
+	 LEFT_SCROLL,
+	 winToScroll,
+	 numToScroll);
+
+  return;
+}				/* _tuiScrollLeft_command */
+
+
+/*
+** _tuiScrollRight_command().
+*/
+static void
+#ifdef __STDC__
+_tuiScrollRight_command (
+			  char *arg,
+			  int fromTTY)
+#else
+_tuiScrollRight_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  int numToScroll;
+  TuiWinInfoPtr winToScroll;
+
+  _parseScrollingArgs (arg, &winToScroll, &numToScroll);
+  tuiDo ((TuiOpaqueFuncPtr) tui_vScroll,
+	 RIGHT_SCROLL,
+	 winToScroll,
+	 numToScroll);
+
+  return;
+}				/* _tuiScrollRight_command */
+
+
+/*
+** _tuiSetFocus().
+**     Set focus to the window named by 'arg'
+*/
+static void
+#ifdef __STDC__
+_tuiSetFocus (
+	       char *arg,
+	       int fromTTY)
+#else
+_tuiSetFocus (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (arg != (char *) NULL)
+    {
+      char *bufPtr = (char *) tuiStrDup (arg);
+      int i;
+      TuiWinInfoPtr winInfo = (TuiWinInfoPtr) NULL;
+
+      for (i = 0; (i < strlen (bufPtr)); i++)
+	bufPtr[i] = toupper (arg[i]);
+
+      if (subsetCompare (bufPtr, "NEXT"))
+	winInfo = tuiNextWin (tuiWinWithFocus ());
+      else if (subsetCompare (bufPtr, "PREV"))
+	winInfo = tuiPrevWin (tuiWinWithFocus ());
+      else
+	winInfo = partialWinByName (bufPtr);
+
+      if (winInfo == (TuiWinInfoPtr) NULL || !winInfo->generic.isVisible)
+	warning ("Invalid window specified. \n\
+The window name specified must be valid and visible.\n");
+      else
+	{
+	  tuiSetWinFocusTo (winInfo);
+	  keypad (cmdWin->generic.handle, (winInfo != cmdWin));
+	}
+
+      if (dataWin->generic.isVisible)
+	tuiRefreshDataWin ();
+      tuiFree (bufPtr);
+      printf_filtered ("Focus set to %s window.\n",
+		       winName ((TuiGenWinInfoPtr) tuiWinWithFocus ()));
+    }
+  else
+    warning ("Incorrect Number of Arguments.\n%s", FOCUS_USAGE);
+
+  return;
+}				/* _tuiSetFocus */
+
+
+/*
+** _tui_vSetFocus()
+*/
+static void
+#ifdef __STDC__
+_tui_vSetFocus (
+		 va_list args)
+#else
+_tui_vSetFocus (args)
+     va_list args;
+#endif
+{
+  char *arg = va_arg (args, char *);
+  int fromTTY = va_arg (args, int);
+
+  _tuiSetFocus (arg, fromTTY);
+
+  return;
+}				/* tui_vSetFocus */
+
+
+/*
+** _tuiSetFocus_command()
+*/
+static void
+#ifdef __STDC__
+_tuiSetFocus_command (
+		       char *arg,
+		       int fromTTY)
+#else
+_tuiSetFocus_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vSetFocus, arg, fromTTY);
+
+  return;
+}				/* tui_SetFocus */
+
+
+/*
+** _tuiAllWindowsInfo().
+*/
+static void
+#ifdef __STDC__
+_tuiAllWindowsInfo (
+		     char *arg,
+		     int fromTTY)
+#else
+_tuiAllWindowsInfo (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  TuiWinType type;
+  TuiWinInfoPtr winWithFocus = tuiWinWithFocus ();
+
+  for (type = SRC_WIN; (type < MAX_MAJOR_WINDOWS); type++)
+    if (winList[type]->generic.isVisible)
+      {
+	if (winWithFocus == winList[type])
+	  printf_filtered ("        %s\t(%d lines)  <has focus>\n",
+			   winName (&winList[type]->generic),
+			   winList[type]->generic.height);
+	else
+	  printf_filtered ("        %s\t(%d lines)\n",
+			   winName (&winList[type]->generic),
+			   winList[type]->generic.height);
+      }
+
+  return;
+}				/* _tuiAllWindowsInfo */
+
+
+/*
+** _tuiRefreshAll_command().
+*/
+static void
+#ifdef __STDC__
+_tuiRefreshAll_command (
+			 char *arg,
+			 int fromTTY)
+#else
+_tuiRefreshAll_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) tuiRefreshAll);
+}
+
+
+/*
+** _tuiSetWinTabWidth_command().
+**        Set the height of the specified window.
+*/
+static void
+#ifdef __STDC__
+_tuiSetTabWidth_command (
+			  char *arg,
+			  int fromTTY)
+#else
+_tuiSetTabWidth_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (arg != (char *) NULL)
+    {
+      int ts;
+
+      ts = atoi (arg);
+      if (ts > 0)
+	tuiSetDefaultTabLen (ts);
+      else
+	warning ("Tab widths greater than 0 must be specified.\n");
+    }
+
+  return;
+}				/* _tuiSetTabWidth_command */
+
+
+/*
+** _tuiSetWinHeight().
+**        Set the height of the specified window.
+*/
+static void
+#ifdef __STDC__
+_tuiSetWinHeight (
+		   char *arg,
+		   int fromTTY)
+#else
+_tuiSetWinHeight (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (arg != (char *) NULL)
+    {
+      char *buf = tuiStrDup (arg);
+      char *bufPtr = buf;
+      char *wname = (char *) NULL;
+      int newHeight, i;
+      TuiWinInfoPtr winInfo;
+
+      wname = bufPtr;
+      bufPtr = strchr (bufPtr, ' ');
+      if (bufPtr != (char *) NULL)
+	{
+	  *bufPtr = (char) 0;
+
+	  /*
+            ** Validate the window name
+            */
+	  for (i = 0; i < strlen (wname); i++)
+	    wname[i] = toupper (wname[i]);
+	  winInfo = partialWinByName (wname);
+
+	  if (winInfo == (TuiWinInfoPtr) NULL || !winInfo->generic.isVisible)
+	    warning ("Invalid window specified. \n\
+The window name specified must be valid and visible.\n");
+	  else
+	    {
+	      /* Process the size */
+	      while (*(++bufPtr) == ' ')
+		;
+
+	      if (*bufPtr != (char) 0)
+		{
+		  int negate = FALSE;
+		  int fixedSize = TRUE;
+		  int inputNo;;
+
+		  if (*bufPtr == '+' || *bufPtr == '-')
+		    {
+		      if (*bufPtr == '-')
+			negate = TRUE;
+		      fixedSize = FALSE;
+		      bufPtr++;
+		    }
+		  inputNo = atoi (bufPtr);
+		  if (inputNo > 0)
+		    {
+		      if (negate)
+			inputNo *= (-1);
+		      if (fixedSize)
+			newHeight = inputNo;
+		      else
+			newHeight = winInfo->generic.height + inputNo;
+		      /*
+                        ** Now change the window's height, and adjust all
+                        ** other windows around it
+                        */
+		      if (_tuiAdjustWinHeights (winInfo,
+						newHeight) == TUI_FAILURE)
+			warning ("Invalid window height specified.\n%s",
+				 WIN_HEIGHT_USAGE);
+		      else
+			init_page_info ();
+		    }
+		  else
+		    warning ("Invalid window height specified.\n%s",
+			     WIN_HEIGHT_USAGE);
+		}
+	    }
+	}
+      else
+	printf_filtered (WIN_HEIGHT_USAGE);
+
+      if (buf != (char *) NULL)
+	tuiFree (buf);
+    }
+  else
+    printf_filtered (WIN_HEIGHT_USAGE);
+
+  return;
+}				/* _tuiSetWinHeight */
+
+
+/*
+** _tui_vSetWinHeight().
+**        Set the height of the specified window, with va_list.
+*/
+static void
+#ifdef __STDC__
+_tui_vSetWinHeight (
+		     va_list args)
+#else
+_tui_vSetWinHeight (args)
+     va_list args;
+#endif
+{
+  char *arg = va_arg (args, char *);
+  int fromTTY = va_arg (args, int);
+
+  _tuiSetWinHeight (arg, fromTTY);
+
+  return;
+}				/* _tui_vSetWinHeight */
+
+
+/*
+** _tuiSetWinHeight_command().
+**        Set the height of the specified window, with va_list.
+*/
+static void
+#ifdef __STDC__
+_tuiSetWinHeight_command (
+			   char *arg,
+			   int fromTTY)
+#else
+_tuiSetWinHeight_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vSetWinHeight, arg, fromTTY);
+
+  return;
+}				/* _tuiSetWinHeight_command */
+
+
+/*
+** _tuiXDBsetWinHeight().
+**        XDB Compatibility command for setting the window height.  This will
+**        increase or decrease the command window by the specified amount.
+*/
+static void
+#ifdef __STDC__
+_tuiXDBsetWinHeight (
+		      char *arg,
+		      int fromTTY)
+#else
+_tuiXDBsetWinHeight (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  if (arg != (char *) NULL)
+    {
+      int inputNo = atoi (arg);
+
+      if (inputNo > 0)
+	{			/* Add 1 for the locator */
+	  int newHeight = termHeight () - (inputNo + 1);
+
+	  if (!_newHeightOk (winList[CMD_WIN], newHeight) ||
+	      _tuiAdjustWinHeights (winList[CMD_WIN],
+				    newHeight) == TUI_FAILURE)
+	    warning ("Invalid window height specified.\n%s",
+		     XDBWIN_HEIGHT_USAGE);
+	}
+      else
+	warning ("Invalid window height specified.\n%s",
+		 XDBWIN_HEIGHT_USAGE);
+    }
+  else
+    warning ("Invalid window height specified.\n%s", XDBWIN_HEIGHT_USAGE);
+
+  return;
+}				/* _tuiXDBsetWinHeight */
+
+
+/*
+** _tui_vXDBsetWinHeight().
+**        Set the height of the specified window, with va_list.
+*/
+static void
+#ifdef __STDC__
+_tui_vXDBsetWinHeight (
+			va_list args)
+#else
+_tui_vXDBsetWinHeight (args)
+     va_list args;
+#endif
+{
+  char *arg = va_arg (args, char *);
+  int fromTTY = va_arg (args, int);
+
+  _tuiXDBsetWinHeight (arg, fromTTY);
+
+  return;
+}				/* _tui_vXDBsetWinHeight */
+
+
+/*
+** _tuiSetWinHeight_command().
+**        Set the height of the specified window, with va_list.
+*/
+static void
+#ifdef __STDC__
+_tuiXDBsetWinHeight_command (
+			      char *arg,
+			      int fromTTY)
+#else
+_tuiXDBsetWinHeight_command (arg, fromTTY)
+     char *arg;
+     int fromTTY;
+#endif
+{
+  tuiDo ((TuiOpaqueFuncPtr) _tui_vXDBsetWinHeight, arg, fromTTY);
+
+  return;
+}				/* _tuiXDBsetWinHeight_command */
+
+
+/*
+** _tuiAdjustWinHeights().
+**        Function to adjust all window heights around the primary
+*/
+static TuiStatus
+#ifdef __STDC__
+_tuiAdjustWinHeights (
+		       TuiWinInfoPtr primaryWinInfo,
+		       int newHeight)
+#else
+_tuiAdjustWinHeights (primaryWinInfo, newHeight)
+     TuiWinInfoPtr primaryWinInfo;
+     int newHeight;
+#endif
+{
+  TuiStatus status = TUI_FAILURE;
+
+  if (_newHeightOk (primaryWinInfo, newHeight))
+    {
+      status = TUI_SUCCESS;
+      if (newHeight != primaryWinInfo->generic.height)
+	{
+	  int i, diff;
+	  TuiWinInfoPtr winInfo;
+	  TuiGenWinInfoPtr locator = locatorWinInfoPtr ();
+	  TuiLayoutType curLayout = currentLayout ();
+
+	  diff = (newHeight - primaryWinInfo->generic.height) * (-1);
+	  if (curLayout == SRC_COMMAND || curLayout == DISASSEM_COMMAND)
+	    {
+	      TuiWinInfoPtr srcWinInfo;
+
+	      _makeInvisibleAndSetNewHeight (primaryWinInfo, newHeight);
+	      if (primaryWinInfo->generic.type == CMD_WIN)
+		{
+		  winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+		  srcWinInfo = winInfo;
+		}
+	      else
+		{
+		  winInfo = winList[CMD_WIN];
+		  srcWinInfo = primaryWinInfo;
+		}
+	      _makeInvisibleAndSetNewHeight (winInfo,
+					     winInfo->generic.height + diff);
+	      cmdWin->generic.origin.y = locator->origin.y + 1;
+	      _makeVisibleWithNewHeight (winInfo);
+	      _makeVisibleWithNewHeight (primaryWinInfo);
+	      if (srcWinInfo->generic.contentSize <= 0)
+		tuiEraseSourceContent (srcWinInfo, EMPTY_SOURCE_PROMPT);
+	    }
+	  else
+	    {
+	      TuiWinInfoPtr firstWin, secondWin;
+
+	      if (curLayout == SRC_DISASSEM_COMMAND)
+		{
+		  firstWin = srcWin;
+		  secondWin = disassemWin;
+		}
+	      else
+		{
+		  firstWin = dataWin;
+		  secondWin = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+		}
+	      if (primaryWinInfo == cmdWin)
+		{		/*
+                    ** Split the change in height accross the 1st & 2nd windows
+                    ** adjusting them as well.
+                    */
+		  int firstSplitDiff = diff / 2;	/* subtract the locator */
+		  int secondSplitDiff = firstSplitDiff;
+
+		  if (diff % 2)
+		    {
+		      if (firstWin->generic.height >
+			  secondWin->generic.height)
+			if (diff < 0)
+			  firstSplitDiff--;
+			else
+			  firstSplitDiff++;
+		      else
+			{
+			  if (diff < 0)
+			    secondSplitDiff--;
+			  else
+			    secondSplitDiff++;
+			}
+		    }
+		  /* make sure that the minimum hieghts are honored */
+		  while ((firstWin->generic.height + firstSplitDiff) < 3)
+		    {
+		      firstSplitDiff++;
+		      secondSplitDiff--;
+		    }
+		  while ((secondWin->generic.height + secondSplitDiff) < 3)
+		    {
+		      secondSplitDiff++;
+		      firstSplitDiff--;
+		    }
+		  _makeInvisibleAndSetNewHeight (
+						  firstWin,
+				 firstWin->generic.height + firstSplitDiff);
+		  secondWin->generic.origin.y = firstWin->generic.height - 1;
+		  _makeInvisibleAndSetNewHeight (
+		    secondWin, secondWin->generic.height + secondSplitDiff);
+		  cmdWin->generic.origin.y = locator->origin.y + 1;
+		  _makeInvisibleAndSetNewHeight (cmdWin, newHeight);
+		}
+	      else
+		{
+		  if ((cmdWin->generic.height + diff) < 1)
+		    {		/*
+                        ** If there is no way to increase the command window
+                        ** take real estate from the 1st or 2nd window.
+                        */
+		      if ((cmdWin->generic.height + diff) < 1)
+			{
+			  int i;
+			  for (i = cmdWin->generic.height + diff;
+			       (i < 1); i++)
+			    if (primaryWinInfo == firstWin)
+			      secondWin->generic.height--;
+			    else
+			      firstWin->generic.height--;
+			}
+		    }
+		  if (primaryWinInfo == firstWin)
+		    _makeInvisibleAndSetNewHeight (firstWin, newHeight);
+		  else
+		    _makeInvisibleAndSetNewHeight (
+						    firstWin,
+						  firstWin->generic.height);
+		  secondWin->generic.origin.y = firstWin->generic.height - 1;
+		  if (primaryWinInfo == secondWin)
+		    _makeInvisibleAndSetNewHeight (secondWin, newHeight);
+		  else
+		    _makeInvisibleAndSetNewHeight (
+				      secondWin, secondWin->generic.height);
+		  cmdWin->generic.origin.y = locator->origin.y + 1;
+		  if ((cmdWin->generic.height + diff) < 1)
+		    _makeInvisibleAndSetNewHeight (cmdWin, 1);
+		  else
+		    _makeInvisibleAndSetNewHeight (
+				     cmdWin, cmdWin->generic.height + diff);
+		}
+	      _makeVisibleWithNewHeight (cmdWin);
+	      _makeVisibleWithNewHeight (secondWin);
+	      _makeVisibleWithNewHeight (firstWin);
+	      if (firstWin->generic.contentSize <= 0)
+		tuiEraseSourceContent (firstWin, EMPTY_SOURCE_PROMPT);
+	      if (secondWin->generic.contentSize <= 0)
+		tuiEraseSourceContent (secondWin, EMPTY_SOURCE_PROMPT);
+	    }
+	}
+    }
+
+  return status;
+}				/* _tuiAdjustWinHeights */
+
+
+/*
+** _makeInvisibleAndSetNewHeight().
+**        Function make the target window (and auxillary windows associated
+**        with the targer) invisible, and set the new height and location.
+*/
+static void
+#ifdef __STDC__
+_makeInvisibleAndSetNewHeight (
+				TuiWinInfoPtr winInfo,
+				int height)
+#else
+_makeInvisibleAndSetNewHeight (winInfo, height)
+     TuiWinInfoPtr winInfo;
+     int height;
+#endif
+{
+  int i;
+  struct symtab *s;
+  TuiGenWinInfoPtr genWinInfo;
+
+
+  m_beInvisible (&winInfo->generic);
+  winInfo->generic.height = height;
+  if (height > 1)
+    winInfo->generic.viewportHeight = height - 1;
+  else
+    winInfo->generic.viewportHeight = height;
+  if (winInfo != cmdWin)
+    winInfo->generic.viewportHeight--;
+
+  /* Now deal with the auxillary windows associated with winInfo */
+  switch (winInfo->generic.type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      genWinInfo = winInfo->detail.sourceInfo.executionInfo;
+      m_beInvisible (genWinInfo);
+      genWinInfo->height = height;
+      genWinInfo->origin.y = winInfo->generic.origin.y;
+      if (height > 1)
+	genWinInfo->viewportHeight = height - 1;
+      else
+	genWinInfo->viewportHeight = height;
+      if (winInfo != cmdWin)
+	genWinInfo->viewportHeight--;
+
+      if (m_hasLocator (winInfo))
+	{
+	  genWinInfo = locatorWinInfoPtr ();
+	  m_beInvisible (genWinInfo);
+	  genWinInfo->origin.y = winInfo->generic.origin.y + height;
+	}
+      break;
+    case DATA_WIN:
+      /* delete all data item windows */
+      for (i = 0; i < winInfo->generic.contentSize; i++)
+	{
+	  genWinInfo = (TuiGenWinInfoPtr) & ((TuiWinElementPtr)
+		      winInfo->generic.content[i])->whichElement.dataWindow;
+	  tuiDelwin (genWinInfo->handle);
+	  genWinInfo->handle = (WINDOW *) NULL;
+	}
+      break;
+    default:
+      break;
+    }
+
+  return;
+}				/* _makeInvisibleAndSetNewHeight */
+
+
+/*
+** _makeVisibleWithNewHeight().
+**        Function to make the windows with new heights visible.
+**        This means re-creating the windows' content since the window
+**        had to be destroyed to be made invisible.
+*/
+static void
+#ifdef __STDC__
+_makeVisibleWithNewHeight (
+			    TuiWinInfoPtr winInfo)
+#else
+_makeVisibleWithNewHeight (winInfo)
+     TuiWinInfoPtr winInfo;
+#endif
+{
+  int i;
+  struct symtab *s;
+
+  m_beVisible (&winInfo->generic);
+  checkAndDisplayHighlightIfNeeded (winInfo);
+  switch (winInfo->generic.type)
+    {
+    case SRC_WIN:
+    case DISASSEM_WIN:
+      freeWinContent (winInfo->detail.sourceInfo.executionInfo);
+      m_beVisible (winInfo->detail.sourceInfo.executionInfo);
+      if (winInfo->generic.content != (OpaquePtr) NULL)
+	{
+	  TuiLineOrAddress lineOrAddr;
+
+	  if (winInfo->generic.type == SRC_WIN)
+	    lineOrAddr.lineNo =
+	      winInfo->detail.sourceInfo.startLineOrAddr.lineNo;
+	  else
+	    lineOrAddr.addr =
+	      winInfo->detail.sourceInfo.startLineOrAddr.addr;
+	  freeWinContent (&winInfo->generic);
+	  tuiUpdateSourceWindow (winInfo,
+				 current_source_symtab,
+				 ((winInfo->generic.type == SRC_WIN) ?
+				  (Opaque) lineOrAddr.lineNo :
+				  lineOrAddr.addr),
+				 TRUE);
+	}
+      else if (selected_frame != (struct frame_info *) NULL)
+	{
+	  Opaque line = 0;
+	  extern int current_source_line;
+
+	  s = find_pc_symtab (selected_frame->pc);
+	  if (winInfo->generic.type == SRC_WIN)
+	    line = (Opaque) current_source_line;
+	  else
+	    line = (Opaque) find_line_pc (s, current_source_line);
+	  tuiUpdateSourceWindow (winInfo, s, line, TRUE);
+	}
+      if (m_hasLocator (winInfo))
+	{
+	  m_beVisible (locatorWinInfoPtr ());
+	  tuiClearLocatorDisplay ();
+	  tuiShowLocatorContent ();
+	}
+      break;
+    case DATA_WIN:
+      tuiDisplayAllData ();
+      break;
+    case CMD_WIN:
+      winInfo->detail.commandInfo.curLine = 0;
+      winInfo->detail.commandInfo.curch = 0;
+      wmove (winInfo->generic.handle,
+	     winInfo->detail.commandInfo.curLine,
+	     winInfo->detail.commandInfo.curch);
+      break;
+    default:
+      break;
+    }
+
+  return;
+}				/* _makeVisibleWithNewHeight */
+
+
+static int
+#ifdef __STDC__
+_newHeightOk (
+	       TuiWinInfoPtr primaryWinInfo,
+	       int newHeight)
+#else
+_newHeightOk (primaryWinInfo, newHeight)
+     TuiWinInfoPtr primaryWinInfo;
+     int newHeight;
+#endif
+{
+  int ok = (newHeight < termHeight ());
+
+  if (ok)
+    {
+      int diff, curHeight;
+      TuiLayoutType curLayout = currentLayout ();
+
+      diff = (newHeight - primaryWinInfo->generic.height) * (-1);
+      if (curLayout == SRC_COMMAND || curLayout == DISASSEM_COMMAND)
+	{
+	  ok = ((primaryWinInfo->generic.type == CMD_WIN &&
+		 newHeight <= (termHeight () - 4) &&
+		 newHeight >= MIN_CMD_WIN_HEIGHT) ||
+		(primaryWinInfo->generic.type != CMD_WIN &&
+		 newHeight <= (termHeight () - 2) &&
+		 newHeight >= MIN_WIN_HEIGHT));
+	  if (ok)
+	    {			/* check the total height */
+	      TuiWinInfoPtr winInfo;
+
+	      if (primaryWinInfo == cmdWin)
+		winInfo = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+	      else
+		winInfo = cmdWin;
+	      ok = ((newHeight +
+		     (winInfo->generic.height + diff)) <= termHeight ());
+	    }
+	}
+      else
+	{
+	  int curTotalHeight, totalHeight, minHeight;
+	  TuiWinInfoPtr firstWin, secondWin;
+
+	  if (curLayout == SRC_DISASSEM_COMMAND)
+	    {
+	      firstWin = srcWin;
+	      secondWin = disassemWin;
+	    }
+	  else
+	    {
+	      firstWin = dataWin;
+	      secondWin = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+	    }
+	  /*
+            ** We could simply add all the heights to obtain the same result
+            ** but below is more explicit since we subtract 1 for the
+            ** line that the first and second windows share, and add one
+            ** for the locator.
+            */
+	  curTotalHeight =
+	    (firstWin->generic.height + secondWin->generic.height - 1)
+	    + cmdWin->generic.height + 1 /*locator*/ ;
+	  if (primaryWinInfo == cmdWin)
+	    {
+	      /* locator included since first & second win share a line */
+	      ok = ((firstWin->generic.height +
+		     secondWin->generic.height + diff) >=
+		    (MIN_WIN_HEIGHT * 2) &&
+		    newHeight >= MIN_CMD_WIN_HEIGHT);
+	      if (ok)
+		{
+		  totalHeight = newHeight + (firstWin->generic.height +
+					  secondWin->generic.height + diff);
+		  minHeight = MIN_CMD_WIN_HEIGHT;
+		}
+	    }
+	  else
+	    {
+	      minHeight = MIN_WIN_HEIGHT;
+	      /*
+                ** First see if we can increase/decrease the command
+                ** window.  And make sure that the command window is
+                ** at least 1 line
+                */
+	      ok = ((cmdWin->generic.height + diff) > 0);
+	      if (!ok)
+		{		/*
+                     ** Looks like we have to increase/decrease one of
+                     ** the other windows
+                     */
+		  if (primaryWinInfo == firstWin)
+		    ok = (secondWin->generic.height + diff) >= minHeight;
+		  else
+		    ok = (firstWin->generic.height + diff) >= minHeight;
+		}
+	      if (ok)
+		{
+		  if (primaryWinInfo == firstWin)
+		    totalHeight = newHeight +
+		      secondWin->generic.height +
+		      cmdWin->generic.height + diff;
+		  else
+		    totalHeight = newHeight +
+		      firstWin->generic.height +
+		      cmdWin->generic.height + diff;
+		}
+	    }
+	  /*
+            ** Now make sure that the proposed total height doesn't exceed
+            ** the old total height.
+            */
+	  if (ok)
+	    ok = (newHeight >= minHeight && totalHeight <= curTotalHeight);
+	}
+    }
+
+  return ok;
+}				/* _newHeightOk */
+
+
+/*
+** _parseScrollingArgs().
+*/
+static void
+#ifdef __STDC__
+_parseScrollingArgs (
+		      char *arg,
+		      TuiWinInfoPtr * winToScroll,
+		      int *numToScroll)
+#else
+_parseScrollingArgs (arg, winToScroll, numToScroll)
+     char *arg;
+     TuiWinInfoPtr *winToScroll;
+     int *numToScroll;
+#endif
+{
+  if (numToScroll)
+    *numToScroll = 0;
+  *winToScroll = tuiWinWithFocus ();
+
+  /*
+    ** First set up the default window to scroll, in case there is no
+    ** window name arg
+    */
+  if (arg != (char *) NULL)
+    {
+      char *buf, *bufPtr;
+
+      /* process the number of lines to scroll */
+      buf = bufPtr = tuiStrDup (arg);
+      if (isdigit (*bufPtr))
+	{
+	  char *numStr;
+
+	  numStr = bufPtr;
+	  bufPtr = strchr (bufPtr, ' ');
+	  if (bufPtr != (char *) NULL)
+	    {
+	      *bufPtr = (char) 0;
+	      if (numToScroll)
+		*numToScroll = atoi (numStr);
+	      bufPtr++;
+	    }
+	  else if (numToScroll)
+	    *numToScroll = atoi (numStr);
+	}
+
+      /* process the window name if one is specified */
+      if (bufPtr != (char *) NULL)
+	{
+	  char *wname;
+	  int i;
+
+	  if (*bufPtr == ' ')
+	    while (*(++bufPtr) == ' ')
+	      ;
+
+	  if (*bufPtr != (char) 0)
+	    wname = bufPtr;
+
+	  /* Validate the window name */
+	  for (i = 0; i < strlen (wname); i++)
+	    wname[i] = toupper (wname[i]);
+	  *winToScroll = partialWinByName (wname);
+
+	  if (*winToScroll == (TuiWinInfoPtr) NULL ||
+	      !(*winToScroll)->generic.isVisible)
+	    warning ("Invalid window specified. \n\
+The window name specified must be valid and visible.\n");
+	  else if (*winToScroll == cmdWin)
+	    *winToScroll = (TuiWinInfoPtr) (sourceWindows ())->list[0];
+	}
+      tuiFree (buf);
+    }
+
+  return;
+}				/* _parseScrollingArgs */
diff --git a/gdb/tui/tuiWin.h b/gdb/tui/tuiWin.h
new file mode 100644
index 0000000..cb8455d
--- /dev/null
+++ b/gdb/tui/tuiWin.h
@@ -0,0 +1,28 @@
+#ifndef _TUI_WIN_H
+#define _TUI_WIN_H
+/*
+** This header file supports
+*/
+
+/*****************************************
+** TYPE DEFINITIONS                        **
+******************************************/
+
+
+
+/*****************************************
+** PUBLIC FUNCTION EXTERNAL DECLS        **
+******************************************/
+extern void             tuiScrollForward PARAMS ((TuiWinInfoPtr, int));
+extern void             tuiScrollBackward PARAMS ((TuiWinInfoPtr, int));
+extern void             tuiScrollLeft PARAMS ((TuiWinInfoPtr, int));
+extern void             tuiScrollRight PARAMS ((TuiWinInfoPtr, int));
+extern void             tui_vScroll PARAMS ((va_list));
+extern void             tuiSetWinFocusTo PARAMS ((TuiWinInfoPtr));
+extern void             tuiClearWinFocusFrom PARAMS ((TuiWinInfoPtr));
+extern void             tuiClearWinFocus PARAMS ((void));
+extern void             tuiResizeAll PARAMS ((void));
+extern void             tuiRefreshAll PARAMS ((void));
+extern void             tuiSigwinchHandler PARAMS ((int));
+
+#endif /*_TUI_WIN_H*/
diff --git a/gdb/typeprint.c b/gdb/typeprint.c
new file mode 100644
index 0000000..1a4877b
--- /dev/null
+++ b/gdb/typeprint.c
@@ -0,0 +1,321 @@
+/* Language independent support for printing types for GDB, the GNU debugger.
+   Copyright 1986, 88, 89, 91, 92, 93, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "obstack.h"
+#include "bfd.h"		/* Binary File Description */
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "language.h"
+#include "demangle.h"
+
+#include "gdb_string.h"
+#include <errno.h>
+
+/* For real-type printing in whatis_exp() */
+extern int objectprint;		/* Controls looking up an object's derived type
+				   using what we find in its vtables.  */
+
+static void
+ptype_command PARAMS ((char *, int));
+
+static struct type *
+ptype_eval PARAMS ((struct expression *));
+
+static void
+whatis_command PARAMS ((char *, int));
+
+static void
+whatis_exp PARAMS ((char *, int));
+
+/* Print a description of a type TYPE in the form of a declaration of a
+   variable named VARSTRING.  (VARSTRING is demangled if necessary.)
+   Output goes to STREAM (via stdio).
+   If SHOW is positive, we show the contents of the outermost level
+   of structure even if there is a type name that could be used instead.
+   If SHOW is negative, we never show the details of elements' types.  */
+
+void
+type_print (type, varstring, stream, show)
+     struct type *type;
+     char *varstring;
+     GDB_FILE *stream;
+     int show;
+{
+  LA_PRINT_TYPE (type, varstring, stream, show, 0);
+}
+
+/* Print type of EXP, or last thing in value history if EXP == NULL.
+   show is passed to type_print.  */
+
+static void
+whatis_exp (exp, show)
+     char *exp;
+     int show;
+{
+  struct expression *expr;
+  register value_ptr val;
+  register struct cleanup *old_chain = NULL;
+  struct type * real_type = NULL;
+  int full = 0;
+  int top = -1;
+  int using_enc = 0;
+
+  if (exp)
+    {
+      expr = parse_expression (exp);
+      old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                &expr);
+      val = evaluate_type (expr);
+    }
+  else
+    val = access_value_history (0);
+
+  real_type = value_rtti_type (val, &full, &top, &using_enc);
+
+  printf_filtered ("type = ");
+
+  if (real_type && objectprint)
+    printf_filtered ("/* real type = %s%s */\n",
+                     TYPE_NAME (real_type),
+                     full ? "" : " (incomplete object)");
+  /* FIXME: maybe better to use type_print (real_type, "", gdb_stdout, -1); */
+
+  type_print (VALUE_TYPE (val), "", gdb_stdout, show);
+  printf_filtered ("\n");
+
+  if (exp)
+    do_cleanups (old_chain);
+}
+
+/* ARGSUSED */
+static void
+whatis_command (exp, from_tty)
+     char *exp;
+     int from_tty;
+{
+  /* Most of the time users do not want to see all the fields
+     in a structure.  If they do they can use the "ptype" command.
+     Hence the "-1" below.  */
+  whatis_exp (exp, -1);
+}
+
+/* Simple subroutine for ptype_command.  */
+
+static struct type *
+ptype_eval (exp)
+     struct expression *exp;
+{
+  if (exp->elts[0].opcode == OP_TYPE)
+    {
+      return (exp->elts[1].type);
+    }
+  else
+    {
+      return (NULL);
+    }
+}
+
+/* TYPENAME is either the name of a type, or an expression.  */
+
+/* ARGSUSED */
+static void
+ptype_command (typename, from_tty)
+     char *typename;
+     int from_tty;
+{
+  register struct type *type;
+  struct expression *expr;
+  register struct cleanup *old_chain;
+
+  if (typename == NULL)
+    {
+      /* Print type of last thing in value history. */
+      whatis_exp (typename, 1);
+    }
+  else
+    {
+      expr = parse_expression (typename);
+      old_chain = make_cleanup ((make_cleanup_func) free_current_contents, 
+                                &expr);
+      type = ptype_eval (expr);
+      if (type != NULL)
+	{
+	  /* User did "ptype <typename>" */
+	  printf_filtered ("type = ");
+	  type_print (type, "", gdb_stdout, 1);
+	  printf_filtered ("\n");
+	  do_cleanups (old_chain);
+	}
+      else
+	{
+	  /* User did "ptype <symbolname>" */
+	  do_cleanups (old_chain);
+	  whatis_exp (typename, 1);
+	}
+    }
+}
+
+/* Print integral scalar data VAL, of type TYPE, onto stdio stream STREAM.
+   Used to print data from type structures in a specified type.  For example,
+   array bounds may be characters or booleans in some languages, and this
+   allows the ranges to be printed in their "natural" form rather than as
+   decimal integer values.
+
+   FIXME:  This is here simply because only the type printing routines
+   currently use it, and it wasn't clear if it really belonged somewhere
+   else (like printcmd.c).  There are a lot of other gdb routines that do
+   something similar, but they are generally concerned with printing values
+   that come from the inferior in target byte order and target size. */
+
+void
+print_type_scalar (type, val, stream)
+     struct type *type;
+     LONGEST val;
+     GDB_FILE *stream;
+{
+  unsigned int i;
+  unsigned len;
+
+  CHECK_TYPEDEF (type);
+
+  switch (TYPE_CODE (type))
+    {
+
+    case TYPE_CODE_ENUM:
+      len = TYPE_NFIELDS (type);
+      for (i = 0; i < len; i++)
+	{
+	  if (TYPE_FIELD_BITPOS (type, i) == val)
+	    {
+	      break;
+	    }
+	}
+      if (i < len)
+	{
+	  fputs_filtered (TYPE_FIELD_NAME (type, i), stream);
+	}
+      else
+	{
+	  print_longest (stream, 'd', 0, val);
+	}
+      break;
+
+    case TYPE_CODE_INT:
+      print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0, val);
+      break;
+
+    case TYPE_CODE_CHAR:
+      LA_PRINT_CHAR ((unsigned char) val, stream);
+      break;
+
+    case TYPE_CODE_BOOL:
+      fprintf_filtered (stream, val ? "TRUE" : "FALSE");
+      break;
+
+    case TYPE_CODE_RANGE:
+      print_type_scalar (TYPE_TARGET_TYPE (type), val, stream);
+      return;
+
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_ARRAY:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_FUNC:
+    case TYPE_CODE_FLT:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_REF:
+      error ("internal error: unhandled type in print_type_scalar");
+      break;
+
+    default:
+      error ("Invalid type code in symbol table.");
+    }
+  gdb_flush (stream);
+}
+
+#if MAINTENANCE_CMDS
+
+/* Dump details of a type specified either directly or indirectly.
+   Uses the same sort of type lookup mechanism as ptype_command()
+   and whatis_command(). */
+
+void
+maintenance_print_type (typename, from_tty)
+     char *typename;
+     int from_tty;
+{
+  register value_ptr val;
+  register struct type *type;
+  register struct cleanup *old_chain;
+  struct expression *expr;
+
+  if (typename != NULL)
+  {
+    expr = parse_expression (typename);
+    old_chain = make_cleanup ((make_cleanup_func) free_current_contents, &expr);
+    if (expr -> elts[0].opcode == OP_TYPE)
+      {
+	/* The user expression names a type directly, just use that type. */
+	type = expr -> elts[1].type;
+      }
+    else
+      {
+	/* The user expression may name a type indirectly by naming an
+	   object of that type.  Find that indirectly named type. */
+	val = evaluate_type (expr);
+	type = VALUE_TYPE (val);
+      }
+    if (type != NULL)
+      {
+	recursive_dump_type (type, 0);
+      }
+    do_cleanups (old_chain);
+  }
+}
+
+#endif	/* MAINTENANCE_CMDS */
+
+
+void
+_initialize_typeprint ()
+{
+
+  add_com ("ptype", class_vars, ptype_command,
+	   "Print definition of type TYPE.\n\
+Argument may be a type name defined by typedef, or \"struct STRUCT-TAG\"\n\
+or \"class CLASS-NAME\" or \"union UNION-TAG\" or \"enum ENUM-TAG\".\n\
+The selected stack frame's lexical context is used to look up the name.");
+
+  add_com ("whatis", class_vars, whatis_command,
+	   "Print data type of expression EXP.");
+
+}
diff --git a/gdb/typeprint.h b/gdb/typeprint.h
new file mode 100644
index 0000000..be4d81a
--- /dev/null
+++ b/gdb/typeprint.h
@@ -0,0 +1,25 @@
+/* Language independent support for printing types for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1992, 1993, 1999
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+void
+print_type_scalar PARAMS ((struct type *type, LONGEST, GDB_FILE *));
+
+void
+c_type_print_varspec_suffix PARAMS ((struct type *, GDB_FILE *, int, int, int));
diff --git a/gdb/ultra3-nat.c b/gdb/ultra3-nat.c
new file mode 100644
index 0000000..2b84cdd
--- /dev/null
+++ b/gdb/ultra3-nat.c
@@ -0,0 +1,329 @@
+/* Native-dependent code for GDB, for NYU Ultra3 running Sym1 OS.
+   Copyright (C) 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by David Wood (wood@nyu.edu) at New York University.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define DEBUG
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>  
+
+#include "gdbcore.h"
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+static void fetch_core_registers PARAMS ((char *, unsigned, int, CORE_ADDR));
+
+/* Assumes support for AMD's Binary Compatibility Standard
+   for ptrace().  If you define ULTRA3, the ultra3 extensions to
+   ptrace() are used allowing the reading of more than one register
+   at a time. 
+
+   This file assumes KERNEL_DEBUGGING is turned off.  This means
+   that if the user/gdb tries to read gr64-gr95 or any of the 
+   protected special registers we silently return -1 (see the
+   CANNOT_STORE/FETCH_REGISTER macros).  */
+#define	ULTRA3
+
+#if !defined (offsetof)
+# define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
+#endif
+
+extern int errno;
+struct ptrace_user pt_struct;
+
+/* Get all available registers from the inferior.  Registers that are
+ * defined in REGISTER_NAMES, but not available to the user/gdb are
+ * supplied as -1.  This may include gr64-gr95 and the protected special
+ * purpose registers.
+ */
+
+void
+fetch_inferior_registers (regno)
+  int regno;
+{
+  register int i,j,ret_val=0;
+  char buf[128];
+
+  if (regno != -1) {
+    fetch_register (regno);
+    return;
+  }
+
+/* Global Registers */
+#ifdef ULTRA3
+  errno = 0;
+  ptrace (PT_READ_STRUCT, inferior_pid,
+	  (PTRACE_ARG3_TYPE) register_addr(GR96_REGNUM,0), 
+	  (int)&pt_struct.pt_gr[0], 32*4);
+  if (errno != 0) {
+      perror_with_name ("reading global registers");
+      ret_val = -1;
+  } else for (regno=GR96_REGNUM, j=0 ; j<32 ; regno++, j++)  {
+      supply_register (regno, &pt_struct.pt_gr[j]);
+  }
+#else
+  for (regno=GR96_REGNUM ; !ret_val && regno < GR96_REGNUM+32 ; regno++)
+    fetch_register(regno);
+#endif
+
+/* Local Registers */
+#ifdef ULTRA3
+  errno = 0;
+  ptrace (PT_READ_STRUCT, inferior_pid,
+	  (PTRACE_ARG3_TYPE) register_addr(LR0_REGNUM,0), 
+	  (int)&pt_struct.pt_lr[0], 128*4);
+  if (errno != 0) {
+      perror_with_name ("reading local registers");
+      ret_val = -1;
+  } else for (regno=LR0_REGNUM, j=0 ; j<128 ; regno++, j++)  {
+      supply_register (regno, &pt_struct.pt_lr[j]);
+  }
+#else
+  for (regno=LR0_REGNUM ; !ret_val && regno < LR0_REGNUM+128 ; regno++)
+    fetch_register(regno);
+#endif
+
+/* Special Registers */
+  fetch_register(GR1_REGNUM);
+  fetch_register(CPS_REGNUM);
+  fetch_register(PC_REGNUM);
+  fetch_register(NPC_REGNUM);
+  fetch_register(PC2_REGNUM);
+  fetch_register(IPC_REGNUM);
+  fetch_register(IPA_REGNUM);
+  fetch_register(IPB_REGNUM);
+  fetch_register(Q_REGNUM);
+  fetch_register(BP_REGNUM);
+  fetch_register(FC_REGNUM);
+
+/* Fake any registers that are in REGISTER_NAMES, but not available to gdb */ 
+  registers_fetched();
+}
+
+/* Store our register values back into the inferior.
+ * If REGNO is -1, do this for all registers.
+ * Otherwise, REGNO specifies which register (so we can save time).  
+ * NOTE: Assumes AMD's binary compatibility standard. 
+ */
+
+void
+store_inferior_registers (regno)
+     int regno;
+{
+  register unsigned int regaddr;
+  char buf[80];
+
+  if (regno >= 0)
+    {
+      if (CANNOT_STORE_REGISTER(regno)) 
+	return;
+      regaddr = register_addr (regno, 0);
+      errno = 0;
+      ptrace (PT_WRITE_U, inferior_pid,
+	      (PTRACE_ARG3_TYPE) regaddr, read_register(regno));
+      if (errno != 0)
+	{
+	  sprintf (buf, "writing register %s (#%d)", REGISTER_NAME (regno), regno);
+	  perror_with_name (buf);
+	}
+    }
+  else
+    {
+#ifdef ULTRA3
+      pt_struct.pt_gr1 = read_register(GR1_REGNUM);
+      for (regno = GR96_REGNUM; regno < GR96_REGNUM+32; regno++)
+	pt_struct.pt_gr[regno] = read_register(regno);
+      for (regno = LR0_REGNUM; regno < LR0_REGNUM+128; regno++)
+	pt_struct.pt_gr[regno] = read_register(regno);
+      errno = 0;
+      ptrace (PT_WRITE_STRUCT, inferior_pid,
+	      (PTRACE_ARG3_TYPE) register_addr(GR1_REGNUM,0), 
+	      (int)&pt_struct.pt_gr1,(1*32*128)*4);
+      if (errno != 0)
+	{
+	   sprintf (buf, "writing all local/global registers");
+	   perror_with_name (buf);
+	}
+      pt_struct.pt_psr = read_register(CPS_REGNUM);
+      pt_struct.pt_pc0 = read_register(NPC_REGNUM);
+      pt_struct.pt_pc1 = read_register(PC_REGNUM);
+      pt_struct.pt_pc2 = read_register(PC2_REGNUM);
+      pt_struct.pt_ipc = read_register(IPC_REGNUM);
+      pt_struct.pt_ipa = read_register(IPA_REGNUM);
+      pt_struct.pt_ipb = read_register(IPB_REGNUM);
+      pt_struct.pt_q   = read_register(Q_REGNUM);
+      pt_struct.pt_bp  = read_register(BP_REGNUM);
+      pt_struct.pt_fc  = read_register(FC_REGNUM);
+      errno = 0;
+      ptrace (PT_WRITE_STRUCT, inferior_pid,
+	      (PTRACE_ARG3_TYPE) register_addr(CPS_REGNUM,0), 
+	      (int)&pt_struct.pt_psr,(10)*4);
+      if (errno != 0)
+	{
+	   sprintf (buf, "writing all special registers");
+	   perror_with_name (buf);
+	   return;
+	}
+#else
+      store_inferior_registers(GR1_REGNUM);
+      for (regno=GR96_REGNUM ; regno<GR96_REGNUM+32 ; regno++)
+	store_inferior_registers(regno);
+      for (regno=LR0_REGNUM ; regno<LR0_REGNUM+128 ; regno++)
+	store_inferior_registers(regno);
+      store_inferior_registers(CPS_REGNUM);
+      store_inferior_registers(PC_REGNUM);
+      store_inferior_registers(NPC_REGNUM);
+      store_inferior_registers(PC2_REGNUM);
+      store_inferior_registers(IPC_REGNUM);
+      store_inferior_registers(IPA_REGNUM);
+      store_inferior_registers(IPB_REGNUM);
+      store_inferior_registers(Q_REGNUM);
+      store_inferior_registers(BP_REGNUM);
+      store_inferior_registers(FC_REGNUM);
+#endif	/* ULTRA3 */
+    }
+}
+
+/* 
+ * Fetch an individual register (and supply it).
+ * return 0 on success, -1 on failure.
+ * NOTE: Assumes AMD's Binary Compatibility Standard for ptrace().
+ */
+static void
+fetch_register (regno)
+     int regno;
+{
+  char buf[128];
+  int	val;
+
+  if (CANNOT_FETCH_REGISTER(regno)) {
+    val = -1;
+    supply_register (regno, &val);
+  } else {
+    errno = 0;
+    val = ptrace (PT_READ_U, inferior_pid,
+		  (PTRACE_ARG3_TYPE) register_addr(regno,0), 0);
+    if (errno != 0) {
+      sprintf(buf,"reading register %s (#%d)",REGISTER_NAME (regno), regno);
+      perror_with_name (buf);
+    } else {
+      supply_register (regno, &val);
+    }
+  }
+}
+
+
+/* 
+ * Read AMD's Binary Compatibilty Standard conforming core file.
+ * struct ptrace_user is the first thing in the core file
+ */
+
+static void
+fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
+     char *core_reg_sect;	/* Unused in this version */
+     unsigned core_reg_size;	/* Unused in this version */
+     int which;			/* Unused in this version */
+     CORE_ADDR reg_addr;	/* Unused in this version */
+{
+  register int regno;
+  int	val;
+  char	buf[4];
+
+  for (regno = 0 ; regno < NUM_REGS; regno++) {
+    if (!CANNOT_FETCH_REGISTER(regno)) {
+      val = bfd_seek (core_bfd, (file_ptr) register_addr (regno, 0), SEEK_SET);
+      if (val < 0 || (val = bfd_read (buf, sizeof buf, 1, core_bfd)) < 0) {
+        char * buffer = (char *) alloca (strlen (REGISTER_NAME (regno)) + 35);
+        strcpy (buffer, "Reading core register ");
+        strcat (buffer, REGISTER_NAME (regno));
+        perror_with_name (buffer);
+      }
+      supply_register (regno, buf);
+    }
+  }
+
+  /* Fake any registers that are in REGISTER_NAMES, but not available to gdb */ 
+  registers_fetched();
+}
+
+
+/*  
+ * Takes a register number as defined in tm.h via REGISTER_NAMES, and maps
+ * it to an offset in a struct ptrace_user defined by AMD's BCS.
+ * That is, it defines the mapping between gdb register numbers and items in
+ * a struct ptrace_user.
+ * A register protection scheme is set up here.  If a register not
+ * available to the user is specified in 'regno', then an address that
+ * will cause ptrace() to fail is returned.
+ */
+CORE_ADDR
+register_addr (regno,blockend)
+     int	regno;
+     CORE_ADDR	blockend;
+{
+  if ((regno >= LR0_REGNUM) && (regno < LR0_REGNUM + 128)) {
+    return(offsetof(struct ptrace_user,pt_lr[regno-LR0_REGNUM]));
+  } else if ((regno >= GR96_REGNUM) && (regno < GR96_REGNUM + 32)) {
+    return(offsetof(struct ptrace_user,pt_gr[regno-GR96_REGNUM]));
+  } else {
+    switch (regno) {
+	case GR1_REGNUM: return(offsetof(struct ptrace_user,pt_gr1));
+	case CPS_REGNUM: return(offsetof(struct ptrace_user,pt_psr));
+	case NPC_REGNUM: return(offsetof(struct ptrace_user,pt_pc0));
+	case PC_REGNUM:  return(offsetof(struct ptrace_user,pt_pc1));
+	case PC2_REGNUM: return(offsetof(struct ptrace_user,pt_pc2));
+	case IPC_REGNUM: return(offsetof(struct ptrace_user,pt_ipc));
+	case IPA_REGNUM: return(offsetof(struct ptrace_user,pt_ipa));
+	case IPB_REGNUM: return(offsetof(struct ptrace_user,pt_ipb));
+	case Q_REGNUM:   return(offsetof(struct ptrace_user,pt_q));
+	case BP_REGNUM:  return(offsetof(struct ptrace_user,pt_bp));
+	case FC_REGNUM:  return(offsetof(struct ptrace_user,pt_fc));
+	default:
+	     fprintf_filtered(gdb_stderr,"register_addr():Bad register %s (%d)\n", 
+			      REGISTER_NAME (regno), regno);
+	     return(0xffffffff);	/* Should make ptrace() fail */
+    }
+  }
+}
+
+
+/* Register that we are able to handle ultra3 core file formats.
+   FIXME: is this really bfd_target_unknown_flavour? */
+
+static struct core_fns ultra3_core_fns =
+{
+  bfd_target_unknown_flavour,
+  fetch_core_registers,
+  NULL
+};
+
+void
+_initialize_core_ultra3 ()
+{
+  add_core_fns (&ultra3_core_fns);
+}
diff --git a/gdb/ultra3-xdep.c b/gdb/ultra3-xdep.c
new file mode 100644
index 0000000..57bab86
--- /dev/null
+++ b/gdb/ultra3-xdep.c
@@ -0,0 +1,128 @@
+/* Host-dependent code for GDB, for NYU Ultra3 running Sym1 OS.
+   Copyright (C) 1988, 1989, 1991, 1992 Free Software Foundation, Inc.
+   Contributed by David Wood (wood@nyu.edu) at New York University.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#define DEBUG
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "symtab.h"
+#include "value.h"
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>  
+
+#include "gdbcore.h"
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+/* Assorted operating system circumventions */
+
+#ifdef SYM1
+
+/* FIXME: Kludge this for now. It really should be system call. */
+int
+getpagesize()
+{ return(8192); }
+
+/* FIXME: Fake out the fcntl() call, which we don't have.  */
+fcntl(fd, cmd, arg)
+int fd, cmd, arg;
+{
+
+  switch (cmd) {
+	case F_GETFL: return(O_RDONLY);	break;
+	default:	
+		printf_unfiltered("Ultra3's fcntl() failing, cmd = %d.\n",cmd);
+		return(-1);
+  }
+}
+
+
+/* 
+ * 4.2 Signal support, requires linking with libjobs.
+ */
+static int	_SigMask;
+#define sigbit(s)       (1L << ((s)-1))
+
+init_SigMask()
+{
+	/* Taken from the sym1 kernel in machdep.c:startup() */
+	_SigMask = sigbit (SIGTSTP) | sigbit (SIGTTOU) | sigbit (SIGTTIN) |
+                        sigbit (SIGCHLD) | sigbit (SIGTINT);
+}
+
+sigmask(signo)
+	int signo;
+{
+	return (1 << (signo-1));
+}
+
+sigsetmask(sigmask)
+unsigned int sigmask;
+{
+	int i, mask = 1;
+	int lastmask = _SigMask;
+
+	for (i=0 ; i<NSIG ; i++) {
+		if (sigmask & mask) { 
+			if (!(_SigMask & mask)) {
+				sighold(i+1);
+				_SigMask |= mask;
+			}
+		} else if (_SigMask & mask) {
+			sigrelse(i+1);
+			_SigMask &= ~mask;
+		}
+		mask <<= 1;
+	}
+	return (lastmask);
+}
+
+sigblock(sigmask)
+unsigned int sigmask;
+{
+	int i, mask = 1;
+	int lastmask = _SigMask;
+
+	for (i=0 ; i<NSIG ; i++) {
+		if ((sigmask & mask) && !(_SigMask & mask)) {
+			sighold(i+1);
+			_SigMask |= mask;
+		}
+		mask <<= 1;
+	}
+	return (lastmask);
+}
+#endif /* SYM1 */
+
+
+/* Initialization code for this module.  */
+
+void
+_initialize_ultra3 ()
+{
+#ifdef SYM1
+	init_SigMask();
+#endif
+}
diff --git a/gdb/umax-xdep.c b/gdb/umax-xdep.c
new file mode 100644
index 0000000..d54519e
--- /dev/null
+++ b/gdb/umax-xdep.c
@@ -0,0 +1,133 @@
+/* umax host stuff.
+   Copyright (C) 1986, 1987, 1989, 1991 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+
+#include <sys/param.h>
+#include <sys/dir.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include "gdbcore.h"
+#include <sys/ptrace.h>
+#define PTRACE_ATTACH PT_ATTACH
+#define PTRACE_DETACH PT_FREEPROC
+
+#include <sys/file.h>
+#include "gdb_stat.h"
+
+/* Work with core dump and executable files, for GDB. 
+   This code would be in corefile.c if it weren't machine-dependent. */
+
+void
+core_file_command (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+  int val;
+  extern char registers[];
+
+  /* Discard all vestiges of any previous core file
+     and mark data and stack spaces as empty.  */
+
+  if (corefile)
+    free (corefile);
+  corefile = 0;
+
+  if (corechan >= 0)
+    close (corechan);
+  corechan = -1;
+
+  data_start = 0;
+  data_end = 0;
+  stack_start = STACK_END_ADDR;
+  stack_end = STACK_END_ADDR;
+
+  /* Now, if a new core file was specified, open it and digest it.  */
+
+  if (filename)
+    {
+      filename = tilde_expand (filename);
+      make_cleanup (free, filename);
+      
+      if (have_inferior_p ())
+	error ("To look at a core file, you must kill the program with \"kill\".");
+      corechan = open (filename, O_RDONLY, 0);
+      if (corechan < 0)
+	perror_with_name (filename);
+      /* 4.2-style (and perhaps also sysV-style) core dump file.  */
+      {
+	struct ptrace_user u;
+	int reg_offset;
+
+	val = myread (corechan, &u, sizeof u);
+	if (val < 0)
+	  perror_with_name (filename);
+	data_start = exec_data_start;
+
+	data_end = data_start + u.pt_dsize;
+	stack_start = stack_end - u.pt_ssize;
+	data_offset = sizeof u;
+	stack_offset = data_offset + u.pt_dsize;
+	reg_offset = 0;
+
+	memcpy (&core_aouthdr, &u.pt_aouthdr, sizeof (AOUTHDR));
+	printf_unfiltered ("Core file is from \"%s\".\n", u.pt_comm);
+	if (u.pt_signal > 0)
+	  printf_unfiltered ("Program terminated with signal %d, %s.\n",
+		  u.pt_signal, safe_strsignal (u.pt_signal));
+
+	/* Read the register values out of the core file and store
+	   them where `read_register' will find them.  */
+
+	{
+	  register int regno;
+
+	  for (regno = 0; regno < NUM_REGS; regno++)
+	    {
+	      char buf[MAX_REGISTER_RAW_SIZE];
+
+	      val = lseek (corechan, register_addr (regno, reg_offset), 0);
+	      if (val < 0)
+		perror_with_name (filename);
+
+ 	      val = myread (corechan, buf, sizeof buf);
+	      if (val < 0)
+		perror_with_name (filename);
+	      supply_register (regno, buf);
+	    }
+	}
+      }
+      if (filename[0] == '/')
+	corefile = savestring (filename, strlen (filename));
+      else
+	{
+	  corefile = concat (current_directory, "/", filename, NULL);
+	}
+
+      flush_cached_frames ();
+      select_frame (get_current_frame (), 0);
+      validate_files ();
+    }
+  else if (from_tty)
+    printf_unfiltered ("No core file now.\n");
+}
diff --git a/gdb/utils.c b/gdb/utils.c
new file mode 100644
index 0000000..08b801b
--- /dev/null
+++ b/gdb/utils.c
@@ -0,0 +1,2932 @@
+/* General utility routines for GDB, the GNU debugger.
+   Copyright 1986, 89, 90, 91, 92, 95, 96, 1998 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include <ctype.h>
+#include "gdb_string.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+
+#ifdef HAVE_CURSES_H
+#include <curses.h>
+#endif
+#ifdef HAVE_TERM_H
+#include <term.h>
+#endif
+
+/* SunOS's curses.h has a '#define reg register' in it.  Thank you Sun. */
+#ifdef reg
+#undef reg
+#endif
+
+#include "signals.h"
+#include "gdbcmd.h"
+#include "serial.h"
+#include "bfd.h"
+#include "target.h"
+#include "demangle.h"
+#include "expression.h"
+#include "language.h"
+#include "annotate.h"
+
+#include <readline/readline.h>
+
+/* readline defines this.  */
+#undef savestring
+
+void (*error_begin_hook) PARAMS ((void));
+
+/* Prototypes for local functions */
+
+static void vfprintf_maybe_filtered PARAMS ((GDB_FILE *, const char *,
+					     va_list, int));
+
+static void fputs_maybe_filtered PARAMS ((const char *, GDB_FILE *, int));
+
+#if defined (USE_MMALLOC) && !defined (NO_MMCHECK)
+static void malloc_botch PARAMS ((void));
+#endif
+
+static void
+fatal_dump_core PARAMS((char *, ...));
+
+static void
+prompt_for_continue PARAMS ((void));
+
+static void 
+set_width_command PARAMS ((char *, int, struct cmd_list_element *));
+
+static void
+set_width PARAMS ((void));
+
+/* If this definition isn't overridden by the header files, assume
+   that isatty and fileno exist on this system.  */
+#ifndef ISATTY
+#define ISATTY(FP)	(isatty (fileno (FP)))
+#endif
+
+#ifndef GDB_FILE_ISATTY
+#define GDB_FILE_ISATTY(GDB_FILE_PTR)   (gdb_file_isatty(GDB_FILE_PTR))   
+#endif
+
+/* Chain of cleanup actions established with make_cleanup,
+   to be executed if an error happens.  */
+
+static struct cleanup *cleanup_chain; /* cleaned up after a failed command */
+static struct cleanup *final_cleanup_chain; /* cleaned up when gdb exits */
+static struct cleanup *run_cleanup_chain; /* cleaned up on each 'run' */
+
+/* Nonzero if we have job control. */
+
+int job_control;
+
+/* Nonzero means a quit has been requested.  */
+
+int quit_flag;
+
+/* Nonzero means quit immediately if Control-C is typed now, rather
+   than waiting until QUIT is executed.  Be careful in setting this;
+   code which executes with immediate_quit set has to be very careful
+   about being able to deal with being interrupted at any time.  It is
+   almost always better to use QUIT; the only exception I can think of
+   is being able to quit out of a system call (using EINTR loses if
+   the SIGINT happens between the previous QUIT and the system call).
+   To immediately quit in the case in which a SIGINT happens between
+   the previous QUIT and setting immediate_quit (desirable anytime we
+   expect to block), call QUIT after setting immediate_quit.  */
+
+int immediate_quit;
+
+/* Nonzero means that encoded C++ names should be printed out in their
+   C++ form rather than raw.  */
+
+int demangle = 1;
+
+/* Nonzero means that encoded C++ names should be printed out in their
+   C++ form even in assembler language displays.  If this is set, but
+   DEMANGLE is zero, names are printed raw, i.e. DEMANGLE controls.  */
+
+int asm_demangle = 0;
+
+/* Nonzero means that strings with character values >0x7F should be printed
+   as octal escapes.  Zero means just print the value (e.g. it's an
+   international character, and the terminal or window can cope.)  */
+
+int sevenbit_strings = 0;
+
+/* String to be printed before error messages, if any.  */
+
+char *error_pre_print;
+
+/* String to be printed before quit messages, if any.  */
+
+char *quit_pre_print;
+
+/* String to be printed before warning messages, if any.  */
+
+char *warning_pre_print = "\nwarning: ";
+
+int pagination_enabled = 1;
+
+
+/* Add a new cleanup to the cleanup_chain,
+   and return the previous chain pointer
+   to be passed later to do_cleanups or discard_cleanups.
+   Args are FUNCTION to clean up with, and ARG to pass to it.  */
+
+struct cleanup *
+make_cleanup (function, arg)
+     void (*function) PARAMS ((PTR));
+     PTR arg;
+{
+    return make_my_cleanup (&cleanup_chain, function, arg);
+}
+
+struct cleanup *
+make_final_cleanup (function, arg)
+     void (*function) PARAMS ((PTR));
+     PTR arg;
+{
+    return make_my_cleanup (&final_cleanup_chain, function, arg);
+}
+struct cleanup *
+make_run_cleanup (function, arg)
+     void (*function) PARAMS ((PTR));
+     PTR arg;
+{
+    return make_my_cleanup (&run_cleanup_chain, function, arg);
+}
+struct cleanup *
+make_my_cleanup (pmy_chain, function, arg)
+     struct cleanup **pmy_chain;
+     void (*function) PARAMS ((PTR));
+     PTR arg;
+{
+  register struct cleanup *new
+    = (struct cleanup *) xmalloc (sizeof (struct cleanup));
+  register struct cleanup *old_chain = *pmy_chain;
+
+  new->next = *pmy_chain;
+  new->function = function;
+  new->arg = arg;
+  *pmy_chain = new;
+
+  return old_chain;
+}
+
+/* Discard cleanups and do the actions they describe
+   until we get back to the point OLD_CHAIN in the cleanup_chain.  */
+
+void
+do_cleanups (old_chain)
+     register struct cleanup *old_chain;
+{
+    do_my_cleanups (&cleanup_chain, old_chain);
+}
+
+void
+do_final_cleanups (old_chain)
+     register struct cleanup *old_chain;
+{
+    do_my_cleanups (&final_cleanup_chain, old_chain);
+}
+
+void
+do_run_cleanups (old_chain)
+     register struct cleanup *old_chain;
+{
+    do_my_cleanups (&run_cleanup_chain, old_chain);
+}
+
+void
+do_my_cleanups (pmy_chain, old_chain)
+     register struct cleanup **pmy_chain;
+     register struct cleanup *old_chain;
+{
+  register struct cleanup *ptr;
+  while ((ptr = *pmy_chain) != old_chain)
+    {
+      *pmy_chain = ptr->next;	/* Do this first incase recursion */
+      (*ptr->function) (ptr->arg);
+      free (ptr);
+    }
+}
+
+/* Discard cleanups, not doing the actions they describe,
+   until we get back to the point OLD_CHAIN in the cleanup_chain.  */
+
+void
+discard_cleanups (old_chain)
+     register struct cleanup *old_chain;
+{
+    discard_my_cleanups (&cleanup_chain, old_chain);
+}
+
+void
+discard_final_cleanups (old_chain)
+     register struct cleanup *old_chain;
+{
+    discard_my_cleanups (&final_cleanup_chain, old_chain);
+}
+
+void
+discard_my_cleanups (pmy_chain, old_chain)
+     register struct cleanup **pmy_chain;
+     register struct cleanup *old_chain;
+{
+  register struct cleanup *ptr;
+  while ((ptr = *pmy_chain) != old_chain)
+    {
+      *pmy_chain = ptr->next;
+      free ((PTR)ptr);
+    }
+}
+
+/* Set the cleanup_chain to 0, and return the old cleanup chain.  */
+struct cleanup *
+save_cleanups ()
+{
+    return save_my_cleanups (&cleanup_chain);
+}
+
+struct cleanup *
+save_final_cleanups ()
+{
+    return save_my_cleanups (&final_cleanup_chain);
+}
+
+struct cleanup *
+save_my_cleanups (pmy_chain)
+    struct cleanup **pmy_chain;
+{
+  struct cleanup *old_chain = *pmy_chain;
+
+  *pmy_chain = 0;
+  return old_chain;
+}
+
+/* Restore the cleanup chain from a previously saved chain.  */
+void
+restore_cleanups (chain)
+     struct cleanup *chain;
+{
+    restore_my_cleanups (&cleanup_chain, chain);
+}
+
+void
+restore_final_cleanups (chain)
+     struct cleanup *chain;
+{
+    restore_my_cleanups (&final_cleanup_chain, chain);
+}
+
+void
+restore_my_cleanups (pmy_chain, chain)
+     struct cleanup **pmy_chain;
+     struct cleanup *chain;
+{
+  *pmy_chain = chain;
+}
+
+/* This function is useful for cleanups.
+   Do
+
+     foo = xmalloc (...);
+     old_chain = make_cleanup (free_current_contents, &foo);
+
+   to arrange to free the object thus allocated.  */
+
+void
+free_current_contents (location)
+     char **location;
+{
+  free (*location);
+}
+
+/* Provide a known function that does nothing, to use as a base for
+   for a possibly long chain of cleanups.  This is useful where we
+   use the cleanup chain for handling normal cleanups as well as dealing
+   with cleanups that need to be done as a result of a call to error().
+   In such cases, we may not be certain where the first cleanup is, unless
+   we have a do-nothing one to always use as the base. */
+
+/* ARGSUSED */
+void
+null_cleanup (arg)
+    PTR arg;
+{
+}
+
+
+/* Print a warning message.  Way to use this is to call warning_begin,
+   output the warning message (use unfiltered output to gdb_stderr),
+   ending in a newline.  There is not currently a warning_end that you
+   call afterwards, but such a thing might be added if it is useful
+   for a GUI to separate warning messages from other output.
+
+   FIXME: Why do warnings use unfiltered output and errors filtered?
+   Is this anything other than a historical accident?  */
+
+void
+warning_begin ()
+{
+  target_terminal_ours ();
+  wrap_here("");			/* Force out any buffered output */
+  gdb_flush (gdb_stdout);
+  if (warning_pre_print)
+    fprintf_unfiltered (gdb_stderr, warning_pre_print);
+}
+
+/* Print a warning message.
+   The first argument STRING is the warning message, used as a fprintf string,
+   and the remaining args are passed as arguments to it.
+   The primary difference between warnings and errors is that a warning
+   does not force the return to command level.  */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+warning (const char *string, ...)
+#else
+warning (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  char *string;
+
+  va_start (args);
+  string = va_arg (args, char *);
+#endif
+  if (warning_hook)
+    (*warning_hook) (string, args);
+  else
+  {
+    warning_begin ();
+    vfprintf_unfiltered (gdb_stderr, string, args);
+    fprintf_unfiltered (gdb_stderr, "\n");
+    va_end (args);
+  }
+}
+
+/* Start the printing of an error message.  Way to use this is to call
+   this, output the error message (use filtered output to gdb_stderr
+   (FIXME: Some callers, like memory_error, use gdb_stdout)), ending
+   in a newline, and then call return_to_top_level (RETURN_ERROR).
+   error() provides a convenient way to do this for the special case
+   that the error message can be formatted with a single printf call,
+   but this is more general.  */
+void
+error_begin ()
+{
+  if (error_begin_hook)
+    error_begin_hook ();
+
+  target_terminal_ours ();
+  wrap_here ("");			/* Force out any buffered output */
+  gdb_flush (gdb_stdout);
+
+  annotate_error_begin ();
+
+  if (error_pre_print)
+    fprintf_filtered (gdb_stderr, error_pre_print);
+}
+
+/* Print an error message and return to command level.
+   The first argument STRING is the error message, used as a fprintf string,
+   and the remaining args are passed as arguments to it.  */
+
+/* VARARGS */
+NORETURN void
+#ifdef ANSI_PROTOTYPES
+error (const char *string, ...)
+#else
+error (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  va_start (args);
+#endif
+  if (error_hook)
+    (*error_hook) ();
+  else 
+    {
+      error_begin ();
+#ifdef ANSI_PROTOTYPES
+      vfprintf_filtered (gdb_stderr, string, args);
+#else
+      {
+	char *string1;
+
+	string1 = va_arg (args, char *);
+	vfprintf_filtered (gdb_stderr, string1, args);
+      }
+#endif
+      fprintf_filtered (gdb_stderr, "\n");
+      va_end (args);
+      return_to_top_level (RETURN_ERROR);
+    }
+}
+
+
+/* Print an error message and exit reporting failure.
+   This is for a error that we cannot continue from.
+   The arguments are printed a la printf.
+
+   This function cannot be declared volatile (NORETURN) in an
+   ANSI environment because exit() is not declared volatile. */
+
+/* VARARGS */
+NORETURN void
+#ifdef ANSI_PROTOTYPES
+fatal (char *string, ...)
+#else
+fatal (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  char *string;
+  va_start (args);
+  string = va_arg (args, char *);
+#endif
+  fprintf_unfiltered (gdb_stderr, "\ngdb: ");
+  vfprintf_unfiltered (gdb_stderr, string, args);
+  fprintf_unfiltered (gdb_stderr, "\n");
+  va_end (args);
+  exit (1);
+}
+
+/* Print an error message and exit, dumping core.
+   The arguments are printed a la printf ().  */
+
+/* VARARGS */
+static void
+#ifdef ANSI_PROTOTYPES
+fatal_dump_core (char *string, ...)
+#else
+fatal_dump_core (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, string);
+#else
+  char *string;
+
+  va_start (args);
+  string = va_arg (args, char *);
+#endif
+  /* "internal error" is always correct, since GDB should never dump
+     core, no matter what the input.  */
+  fprintf_unfiltered (gdb_stderr, "\ngdb internal error: ");
+  vfprintf_unfiltered (gdb_stderr, string, args);
+  fprintf_unfiltered (gdb_stderr, "\n");
+  va_end (args);
+
+  signal (SIGQUIT, SIG_DFL);
+  kill (getpid (), SIGQUIT);
+  /* We should never get here, but just in case...  */
+  exit (1);
+}
+
+/* The strerror() function can return NULL for errno values that are
+   out of range.  Provide a "safe" version that always returns a
+   printable string. */
+
+char *
+safe_strerror (errnum)
+     int errnum;
+{
+  char *msg;
+  static char buf[32];
+
+  if ((msg = strerror (errnum)) == NULL)
+    {
+      sprintf (buf, "(undocumented errno %d)", errnum);
+      msg = buf;
+    }
+  return (msg);
+}
+
+/* The strsignal() function can return NULL for signal values that are
+   out of range.  Provide a "safe" version that always returns a
+   printable string. */
+
+char *
+safe_strsignal (signo)
+     int signo;
+{
+  char *msg;
+  static char buf[32];
+
+  if ((msg = strsignal (signo)) == NULL)
+    {
+      sprintf (buf, "(undocumented signal %d)", signo);
+      msg = buf;
+    }
+  return (msg);
+}
+
+
+/* Print the system error message for errno, and also mention STRING
+   as the file name for which the error was encountered.
+   Then return to command level.  */
+
+NORETURN void
+perror_with_name (string)
+     char *string;
+{
+  char *err;
+  char *combined;
+
+  err = safe_strerror (errno);
+  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
+  strcpy (combined, string);
+  strcat (combined, ": ");
+  strcat (combined, err);
+
+  /* I understand setting these is a matter of taste.  Still, some people
+     may clear errno but not know about bfd_error.  Doing this here is not
+     unreasonable. */
+  bfd_set_error (bfd_error_no_error);
+  errno = 0;
+
+  error ("%s.", combined); 
+}
+
+/* Print the system error message for ERRCODE, and also mention STRING
+   as the file name for which the error was encountered.  */
+
+void
+print_sys_errmsg (string, errcode)
+     char *string;
+     int errcode;
+{
+  char *err;
+  char *combined;
+
+  err = safe_strerror (errcode);
+  combined = (char *) alloca (strlen (err) + strlen (string) + 3);
+  strcpy (combined, string);
+  strcat (combined, ": ");
+  strcat (combined, err);
+
+  /* We want anything which was printed on stdout to come out first, before
+     this message.  */
+  gdb_flush (gdb_stdout);
+  fprintf_unfiltered (gdb_stderr, "%s.\n", combined);
+}
+
+/* Control C eventually causes this to be called, at a convenient time.  */
+
+void
+quit ()
+{
+  serial_t gdb_stdout_serial = serial_fdopen (1);
+
+  target_terminal_ours ();
+
+  /* We want all output to appear now, before we print "Quit".  We
+     have 3 levels of buffering we have to flush (it's possible that
+     some of these should be changed to flush the lower-level ones
+     too):  */
+
+  /* 1.  The _filtered buffer.  */
+  wrap_here ((char *)0);
+
+  /* 2.  The stdio buffer.  */
+  gdb_flush (gdb_stdout);
+  gdb_flush (gdb_stderr);
+
+  /* 3.  The system-level buffer.  */
+  SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
+  SERIAL_UN_FDOPEN (gdb_stdout_serial);
+
+  annotate_error_begin ();
+
+  /* Don't use *_filtered; we don't want to prompt the user to continue.  */
+  if (quit_pre_print)
+    fprintf_unfiltered (gdb_stderr, quit_pre_print);
+
+  if (job_control
+      /* If there is no terminal switching for this target, then we can't
+	 possibly get screwed by the lack of job control.  */
+      || current_target.to_terminal_ours == NULL)
+    fprintf_unfiltered (gdb_stderr, "Quit\n");
+  else
+    fprintf_unfiltered (gdb_stderr,
+	     "Quit (expect signal SIGINT when the program is resumed)\n");
+  return_to_top_level (RETURN_QUIT);
+}
+
+
+#if defined(__GO32__)
+
+/* In the absence of signals, poll keyboard for a quit.
+   Called from #define QUIT pollquit() in xm-go32.h. */
+
+void
+notice_quit()
+{
+  if (kbhit ())
+    switch (getkey ())
+      {
+      case 1:
+	quit_flag = 1;
+	break;
+      case 2:
+	immediate_quit = 2;
+	break;
+      default:
+	/* We just ignore it */
+	/* FIXME!! Don't think this actually works! */
+	fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
+	break;
+      }
+}
+
+#elif defined(_MSC_VER) /* should test for wingdb instead? */
+
+/*
+ * Windows translates all keyboard and mouse events 
+ * into a message which is appended to the message 
+ * queue for the process.
+ */
+
+void notice_quit()
+{
+  int k = win32pollquit();
+  if (k == 1)
+    quit_flag = 1;
+  else if (k == 2)
+    immediate_quit = 1;
+}
+
+#else /* !defined(__GO32__) && !defined(_MSC_VER) */
+
+void notice_quit()
+{
+  /* Done by signals */
+}
+
+#endif /* !defined(__GO32__) && !defined(_MSC_VER) */
+
+void
+pollquit()
+{
+  notice_quit ();
+  if (quit_flag || immediate_quit)
+    quit ();
+}
+
+/* Control C comes here */
+
+void
+request_quit (signo)
+     int signo;
+{
+  quit_flag = 1;
+  /* Restore the signal handler.  Harmless with BSD-style signals, needed
+     for System V-style signals.  So just always do it, rather than worrying
+     about USG defines and stuff like that.  */
+  signal (signo, request_quit);
+
+#ifdef REQUEST_QUIT
+  REQUEST_QUIT;
+#else
+  if (immediate_quit) 
+    quit ();
+#endif
+}
+
+
+/* Memory management stuff (malloc friends).  */
+
+/* Make a substitute size_t for non-ANSI compilers. */
+
+#ifndef HAVE_STDDEF_H
+#ifndef size_t
+#define size_t unsigned int
+#endif
+#endif
+
+#if !defined (USE_MMALLOC)
+
+PTR
+mmalloc (md, size)
+     PTR md;
+     size_t size;
+{
+  return malloc (size);
+}
+
+PTR
+mrealloc (md, ptr, size)
+     PTR md;
+     PTR ptr;
+     size_t size;
+{
+  if (ptr == 0)		/* Guard against old realloc's */
+    return malloc (size);
+  else
+    return realloc (ptr, size);
+}
+
+void
+mfree (md, ptr)
+     PTR md;
+     PTR ptr;
+{
+  free (ptr);
+}
+
+#endif	/* USE_MMALLOC */
+
+#if !defined (USE_MMALLOC) || defined (NO_MMCHECK)
+
+void
+init_malloc (md)
+     PTR md;
+{
+}
+
+#else /* Have mmalloc and want corruption checking */
+
+static void
+malloc_botch ()
+{
+  fatal_dump_core ("Memory corruption");
+}
+
+/* Attempt to install hooks in mmalloc/mrealloc/mfree for the heap specified
+   by MD, to detect memory corruption.  Note that MD may be NULL to specify
+   the default heap that grows via sbrk.
+
+   Note that for freshly created regions, we must call mmcheckf prior to any
+   mallocs in the region.  Otherwise, any region which was allocated prior to
+   installing the checking hooks, which is later reallocated or freed, will
+   fail the checks!  The mmcheck function only allows initial hooks to be
+   installed before the first mmalloc.  However, anytime after we have called
+   mmcheck the first time to install the checking hooks, we can call it again
+   to update the function pointer to the memory corruption handler.
+
+   Returns zero on failure, non-zero on success. */
+
+#ifndef MMCHECK_FORCE
+#define MMCHECK_FORCE 0
+#endif
+
+void
+init_malloc (md)
+     PTR md;
+{
+  if (!mmcheckf (md, malloc_botch, MMCHECK_FORCE))
+    {
+      /* Don't use warning(), which relies on current_target being set
+	 to something other than dummy_target, until after
+	 initialize_all_files(). */
+
+      fprintf_unfiltered
+	(gdb_stderr, "warning: failed to install memory consistency checks; ");
+      fprintf_unfiltered
+	(gdb_stderr, "configuration should define NO_MMCHECK or MMCHECK_FORCE\n");
+    }
+
+  mmtrace ();
+}
+
+#endif /* Have mmalloc and want corruption checking  */
+
+/* Called when a memory allocation fails, with the number of bytes of
+   memory requested in SIZE. */
+
+NORETURN void
+nomem (size)
+     long size;
+{
+  if (size > 0)
+    {
+      fatal ("virtual memory exhausted: can't allocate %ld bytes.", size);
+    }
+  else
+    {
+      fatal ("virtual memory exhausted.");
+    }
+}
+
+/* Like mmalloc but get error if no storage available, and protect against
+   the caller wanting to allocate zero bytes.  Whether to return NULL for
+   a zero byte request, or translate the request into a request for one
+   byte of zero'd storage, is a religious issue. */
+
+PTR
+xmmalloc (md, size)
+     PTR md;
+     long size;
+{
+  register PTR val;
+
+  if (size == 0)
+    {
+      val = NULL;
+    }
+  else if ((val = mmalloc (md, size)) == NULL)
+    {
+      nomem (size);
+    }
+  return (val);
+}
+
+/* Like mrealloc but get error if no storage available.  */
+
+PTR
+xmrealloc (md, ptr, size)
+     PTR md;
+     PTR ptr;
+     long size;
+{
+  register PTR val;
+
+  if (ptr != NULL)
+    {
+      val = mrealloc (md, ptr, size);
+    }
+  else
+    {
+      val = mmalloc (md, size);
+    }
+  if (val == NULL)
+    {
+      nomem (size);
+    }
+  return (val);
+}
+
+/* Like malloc but get error if no storage available, and protect against
+   the caller wanting to allocate zero bytes.  */
+
+PTR
+xmalloc (size)
+     size_t size;
+{
+  return (xmmalloc ((PTR) NULL, size));
+}
+
+/* Like mrealloc but get error if no storage available.  */
+
+PTR
+xrealloc (ptr, size)
+     PTR ptr;
+     size_t size;
+{
+  return (xmrealloc ((PTR) NULL, ptr, size));
+}
+
+
+/* My replacement for the read system call.
+   Used like `read' but keeps going if `read' returns too soon.  */
+
+int
+myread (desc, addr, len)
+     int desc;
+     char *addr;
+     int len;
+{
+  register int val;
+  int orglen = len;
+
+  while (len > 0)
+    {
+      val = read (desc, addr, len);
+      if (val < 0)
+	return val;
+      if (val == 0)
+	return orglen - len;
+      len -= val;
+      addr += val;
+    }
+  return orglen;
+}
+
+/* Make a copy of the string at PTR with SIZE characters
+   (and add a null character at the end in the copy).
+   Uses malloc to get the space.  Returns the address of the copy.  */
+
+char *
+savestring (ptr, size)
+     const char *ptr;
+     int size;
+{
+  register char *p = (char *) xmalloc (size + 1);
+  memcpy (p, ptr, size);
+  p[size] = 0;
+  return p;
+}
+
+char *
+msavestring (md, ptr, size)
+     PTR md;
+     const char *ptr;
+     int size;
+{
+  register char *p = (char *) xmmalloc (md, size + 1);
+  memcpy (p, ptr, size);
+  p[size] = 0;
+  return p;
+}
+
+/* The "const" is so it compiles under DGUX (which prototypes strsave
+   in <string.h>.  FIXME: This should be named "xstrsave", shouldn't it?
+   Doesn't real strsave return NULL if out of memory?  */
+char *
+strsave (ptr)
+     const char *ptr;
+{
+  return savestring (ptr, strlen (ptr));
+}
+
+char *
+mstrsave (md, ptr)
+     PTR md;
+     const char *ptr;
+{
+  return (msavestring (md, ptr, strlen (ptr)));
+}
+
+void
+print_spaces (n, file)
+     register int n;
+     register GDB_FILE *file;
+{
+  if (file->ts_streamtype == astring)
+    {
+      char *p;
+
+      gdb_file_adjust_strbuf (n, file);
+      p = file->ts_strbuf + strlen (file->ts_strbuf);
+
+      memset (p, ' ', n);
+      p[n] = '\000';
+    }
+  else
+    {
+      while (n-- > 0)
+	fputc (' ', file->ts_filestream);
+    }
+}
+
+/* Print a host address.  */
+
+void
+gdb_print_address (addr, stream)
+     PTR addr;
+     GDB_FILE *stream;
+{
+
+  /* We could use the %p conversion specifier to fprintf if we had any
+     way of knowing whether this host supports it.  But the following
+     should work on the Alpha and on 32 bit machines.  */
+
+  fprintf_filtered (stream, "0x%lx", (unsigned long)addr);
+}
+
+/* Ask user a y-or-n question and return 1 iff answer is yes.
+   Takes three args which are given to printf to print the question.
+   The first, a control string, should end in "? ".
+   It should not say how to answer, because we do that.  */
+
+/* VARARGS */
+int
+#ifdef ANSI_PROTOTYPES
+query (char *ctlstr, ...)
+#else
+query (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+  register int answer;
+  register int ans2;
+  int retval;
+
+#ifdef ANSI_PROTOTYPES
+  va_start (args, ctlstr);
+#else
+  char *ctlstr;
+  va_start (args);
+  ctlstr = va_arg (args, char *);
+#endif
+
+  if (query_hook)
+    {
+      return query_hook (ctlstr, args);
+    }
+
+  /* Automatically answer "yes" if input is not from a terminal.  */
+  if (!input_from_terminal_p ())
+    return 1;
+#ifdef MPW
+  /* FIXME Automatically answer "yes" if called from MacGDB.  */
+  if (mac_app)
+    return 1;
+#endif /* MPW */
+
+  while (1)
+    {
+      wrap_here ("");		/* Flush any buffered output */
+      gdb_flush (gdb_stdout);
+
+      if (annotation_level > 1)
+	printf_filtered ("\n\032\032pre-query\n");
+
+      vfprintf_filtered (gdb_stdout, ctlstr, args);
+      printf_filtered ("(y or n) ");
+
+      if (annotation_level > 1)
+	printf_filtered ("\n\032\032query\n");
+
+#ifdef MPW
+      /* If not in MacGDB, move to a new line so the entered line doesn't
+	 have a prompt on the front of it. */
+      if (!mac_app)
+	fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+
+      wrap_here("");
+      gdb_flush (gdb_stdout);
+
+#if defined(TUI)
+      if (!tui_version || cmdWin == tuiWinWithFocus())
+#endif
+	answer = fgetc (stdin);
+#if defined(TUI)
+      else
+
+        answer = (unsigned char)tuiBufferGetc();
+
+#endif
+      clearerr (stdin);		/* in case of C-d */
+      if (answer == EOF)	/* C-d */
+        {
+	  retval = 1;
+	  break;
+	}
+      /* Eat rest of input line, to EOF or newline */
+      if ((answer != '\n') || (tui_version && answer != '\r'))
+	do 
+	  {
+#if defined(TUI)
+	    if (!tui_version || cmdWin == tuiWinWithFocus())
+#endif
+	      ans2 = fgetc (stdin);
+#if defined(TUI)
+	    else
+
+              ans2 = (unsigned char)tuiBufferGetc(); 
+#endif
+	    clearerr (stdin);
+	  }
+        while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
+      TUIDO(((TuiOpaqueFuncPtr)tui_vStartNewLines, 1));
+
+      if (answer >= 'a')
+	answer -= 040;
+      if (answer == 'Y')
+	{
+	  retval = 1;
+	  break;
+	}
+      if (answer == 'N')
+	{
+	  retval = 0;
+	  break;
+	}
+      printf_filtered ("Please answer y or n.\n");
+    }
+
+  if (annotation_level > 1)
+    printf_filtered ("\n\032\032post-query\n");
+  return retval;
+}
+
+
+/* Parse a C escape sequence.  STRING_PTR points to a variable
+   containing a pointer to the string to parse.  That pointer
+   should point to the character after the \.  That pointer
+   is updated past the characters we use.  The value of the
+   escape sequence is returned.
+
+   A negative value means the sequence \ newline was seen,
+   which is supposed to be equivalent to nothing at all.
+
+   If \ is followed by a null character, we return a negative
+   value and leave the string pointer pointing at the null character.
+
+   If \ is followed by 000, we return 0 and leave the string pointer
+   after the zeros.  A value of 0 does not mean end of string.  */
+
+int
+parse_escape (string_ptr)
+     char **string_ptr;
+{
+  register int c = *(*string_ptr)++;
+  switch (c)
+    {
+    case 'a':
+      return 007;		/* Bell (alert) char */
+    case 'b':
+      return '\b';
+    case 'e':			/* Escape character */
+      return 033;
+    case 'f':
+      return '\f';
+    case 'n':
+      return '\n';
+    case 'r':
+      return '\r';
+    case 't':
+      return '\t';
+    case 'v':
+      return '\v';
+    case '\n':
+      return -2;
+    case 0:
+      (*string_ptr)--;
+      return 0;
+    case '^':
+      c = *(*string_ptr)++;
+      if (c == '\\')
+	c = parse_escape (string_ptr);
+      if (c == '?')
+	return 0177;
+      return (c & 0200) | (c & 037);
+      
+    case '0':
+    case '1':
+    case '2':
+    case '3':
+    case '4':
+    case '5':
+    case '6':
+    case '7':
+      {
+	register int i = c - '0';
+	register int count = 0;
+	while (++count < 3)
+	  {
+	    if ((c = *(*string_ptr)++) >= '0' && c <= '7')
+	      {
+		i *= 8;
+		i += c - '0';
+	      }
+	    else
+	      {
+		(*string_ptr)--;
+		break;
+	      }
+	  }
+	return i;
+      }
+    default:
+      return c;
+    }
+}
+
+/* Print the character C on STREAM as part of the contents of a literal
+   string whose delimiter is QUOTER.  Note that this routine should only
+   be call for printing things which are independent of the language
+   of the program being debugged. */
+
+void
+gdb_printchar (c, stream, quoter)
+     register int c;
+     GDB_FILE *stream;
+     int quoter;
+{
+
+  c &= 0xFF;			/* Avoid sign bit follies */
+
+  if (              c < 0x20  ||		/* Low control chars */	
+      (c >= 0x7F && c < 0xA0) ||		/* DEL, High controls */
+      (sevenbit_strings && c >= 0x80)) {	/* high order bit set */
+    switch (c)
+      {
+      case '\n':
+	fputs_filtered ("\\n", stream);
+	break;
+      case '\b':
+	fputs_filtered ("\\b", stream);
+	break;
+      case '\t':
+	fputs_filtered ("\\t", stream);
+	break;
+      case '\f':
+	fputs_filtered ("\\f", stream);
+	break;
+      case '\r':
+	fputs_filtered ("\\r", stream);
+	break;
+      case '\033':
+	fputs_filtered ("\\e", stream);
+	break;
+      case '\007':
+	fputs_filtered ("\\a", stream);
+	break;
+      default:
+	fprintf_filtered (stream, "\\%.3o", (unsigned int) c);
+	break;
+      }
+  } else {
+    if (c == '\\' || c == quoter)
+      fputs_filtered ("\\", stream);
+    fprintf_filtered (stream, "%c", c);
+  }
+}
+
+
+
+
+static char * hexlate = "0123456789abcdef" ;
+int fmthex(inbuf,outbuff,length,linelength)
+     unsigned char * inbuf ;
+     unsigned char * outbuff;
+     int length;
+     int linelength;
+{
+  unsigned char byte , nib ;
+  int outlength = 0 ;
+
+  while (length)
+    {
+      if (outlength >= linelength) break ;
+      byte = *inbuf ;
+      inbuf++ ;
+      nib = byte >> 4 ;
+      *outbuff++ = hexlate[nib] ;
+      nib = byte &0x0f ;
+      *outbuff++ = hexlate[nib] ;
+      *outbuff++ = ' ' ;
+      length-- ;
+      outlength += 3 ;
+    }
+  *outbuff = '\0' ; /* null terminate our output line */
+  return outlength ;
+}
+
+
+/* Number of lines per page or UINT_MAX if paging is disabled.  */
+static unsigned int lines_per_page;
+/* Number of chars per line or UNIT_MAX is line folding is disabled.  */
+static unsigned int chars_per_line;
+/* Current count of lines printed on this page, chars on this line.  */
+static unsigned int lines_printed, chars_printed;
+
+/* Buffer and start column of buffered text, for doing smarter word-
+   wrapping.  When someone calls wrap_here(), we start buffering output
+   that comes through fputs_filtered().  If we see a newline, we just
+   spit it out and forget about the wrap_here().  If we see another
+   wrap_here(), we spit it out and remember the newer one.  If we see
+   the end of the line, we spit out a newline, the indent, and then
+   the buffered output.  */
+
+/* Malloc'd buffer with chars_per_line+2 bytes.  Contains characters which
+   are waiting to be output (they have already been counted in chars_printed).
+   When wrap_buffer[0] is null, the buffer is empty.  */
+static char *wrap_buffer;
+
+/* Pointer in wrap_buffer to the next character to fill.  */
+static char *wrap_pointer;
+
+/* String to indent by if the wrap occurs.  Must not be NULL if wrap_column
+   is non-zero.  */
+static char *wrap_indent;
+
+/* Column number on the screen where wrap_buffer begins, or 0 if wrapping
+   is not in effect.  */
+static int wrap_column;
+
+
+/* Inialize the lines and chars per page */
+void
+init_page_info()
+{
+#if defined(TUI)
+  if (tui_version && m_winPtrNotNull(cmdWin))
+    {
+      lines_per_page = cmdWin->generic.height;
+      chars_per_line = cmdWin->generic.width;
+    }
+  else
+#endif
+    {
+      /* These defaults will be used if we are unable to get the correct
+         values from termcap.  */
+#if defined(__GO32__)
+      lines_per_page = ScreenRows();
+      chars_per_line = ScreenCols();
+#else  
+      lines_per_page = 24;
+      chars_per_line = 80;
+
+#if !defined (MPW) && !defined (_WIN32)
+      /* No termcap under MPW, although might be cool to do something
+         by looking at worksheet or console window sizes. */
+      /* Initialize the screen height and width from termcap.  */
+      {
+        char *termtype = getenv ("TERM");
+
+        /* Positive means success, nonpositive means failure.  */
+        int status;
+
+        /* 2048 is large enough for all known terminals, according to the
+           GNU termcap manual.  */
+        char term_buffer[2048];
+
+        if (termtype)
+          {
+	    status = tgetent (term_buffer, termtype);
+	    if (status > 0)
+	      {
+	        int val;
+		int running_in_emacs = getenv ("EMACS") != NULL;
+	    
+	        val = tgetnum ("li");
+	        if (val >= 0 && !running_in_emacs)
+	          lines_per_page = val;
+	        else
+	          /* The number of lines per page is not mentioned
+		     in the terminal description.  This probably means
+		     that paging is not useful (e.g. emacs shell window),
+		     so disable paging.  */
+	          lines_per_page = UINT_MAX;
+	    
+	        val = tgetnum ("co");
+	        if (val >= 0)
+	          chars_per_line = val;
+	      }
+          }
+      }
+#endif /* MPW */
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+
+      /* If there is a better way to determine the window size, use it. */
+      SIGWINCH_HANDLER (SIGWINCH);
+#endif
+#endif
+      /* If the output is not a terminal, don't paginate it.  */
+      if (!GDB_FILE_ISATTY (gdb_stdout))
+        lines_per_page = UINT_MAX;
+  } /* the command_line_version */
+  set_width();
+}
+
+static void
+set_width()
+{
+  if (chars_per_line == 0)
+    init_page_info();
+
+  if (!wrap_buffer)
+    {
+      wrap_buffer = (char *) xmalloc (chars_per_line + 2);
+      wrap_buffer[0] = '\0';
+    }
+  else
+    wrap_buffer = (char *) xrealloc (wrap_buffer, chars_per_line + 2);
+  wrap_pointer = wrap_buffer;   /* Start it at the beginning */
+}
+
+/* ARGSUSED */
+static void 
+set_width_command (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  set_width ();
+}
+
+/* Wait, so the user can read what's on the screen.  Prompt the user
+   to continue by pressing RETURN.  */
+
+static void
+prompt_for_continue ()
+{
+  char *ignore;
+  char cont_prompt[120];
+
+  if (annotation_level > 1)
+    printf_unfiltered ("\n\032\032pre-prompt-for-continue\n");
+
+  strcpy (cont_prompt,
+	  "---Type <return> to continue, or q <return> to quit---");
+  if (annotation_level > 1)
+    strcat (cont_prompt, "\n\032\032prompt-for-continue\n");
+
+  /* We must do this *before* we call gdb_readline, else it will eventually
+     call us -- thinking that we're trying to print beyond the end of the 
+     screen.  */
+  reinitialize_more_filter ();
+
+  immediate_quit++;
+  /* On a real operating system, the user can quit with SIGINT.
+     But not on GO32.
+
+     'q' is provided on all systems so users don't have to change habits
+     from system to system, and because telling them what to do in
+     the prompt is more user-friendly than expecting them to think of
+     SIGINT.  */
+  /* Call readline, not gdb_readline, because GO32 readline handles control-C
+     whereas control-C to gdb_readline will cause the user to get dumped
+     out to DOS.  */
+  ignore = readline (cont_prompt);
+
+  if (annotation_level > 1)
+    printf_unfiltered ("\n\032\032post-prompt-for-continue\n");
+
+  if (ignore)
+    {
+      char *p = ignore;
+      while (*p == ' ' || *p == '\t')
+	++p;
+      if (p[0] == 'q')
+	request_quit (SIGINT);
+      free (ignore);
+    }
+  immediate_quit--;
+
+  /* Now we have to do this again, so that GDB will know that it doesn't
+     need to save the ---Type <return>--- line at the top of the screen.  */
+  reinitialize_more_filter ();
+
+  dont_repeat ();		/* Forget prev cmd -- CR won't repeat it. */
+}
+
+/* Reinitialize filter; ie. tell it to reset to original values.  */
+
+void
+reinitialize_more_filter ()
+{
+  lines_printed = 0;
+  chars_printed = 0;
+}
+
+/* Indicate that if the next sequence of characters overflows the line,
+   a newline should be inserted here rather than when it hits the end. 
+   If INDENT is non-null, it is a string to be printed to indent the
+   wrapped part on the next line.  INDENT must remain accessible until
+   the next call to wrap_here() or until a newline is printed through
+   fputs_filtered().
+
+   If the line is already overfull, we immediately print a newline and
+   the indentation, and disable further wrapping.
+
+   If we don't know the width of lines, but we know the page height,
+   we must not wrap words, but should still keep track of newlines
+   that were explicitly printed.
+
+   INDENT should not contain tabs, as that will mess up the char count
+   on the next line.  FIXME.
+
+   This routine is guaranteed to force out any output which has been
+   squirreled away in the wrap_buffer, so wrap_here ((char *)0) can be
+   used to force out output from the wrap_buffer.  */
+
+void
+wrap_here(indent)
+     char *indent;
+{
+  /* This should have been allocated, but be paranoid anyway. */
+  if (!wrap_buffer)
+    abort ();
+
+  if (wrap_buffer[0])
+    {
+      *wrap_pointer = '\0';
+      fputs_unfiltered (wrap_buffer, gdb_stdout);
+    }
+  wrap_pointer = wrap_buffer;
+  wrap_buffer[0] = '\0';
+  if (chars_per_line == UINT_MAX)		/* No line overflow checking */
+    {
+      wrap_column = 0;
+    }
+  else if (chars_printed >= chars_per_line)
+    {
+      puts_filtered ("\n");
+      if (indent != NULL)
+	puts_filtered (indent);
+      wrap_column = 0;
+    }
+  else
+    {
+      wrap_column = chars_printed;
+      if (indent == NULL)
+	wrap_indent = "";
+      else
+	wrap_indent = indent;
+    }
+}
+
+/* Ensure that whatever gets printed next, using the filtered output
+   commands, starts at the beginning of the line.  I.E. if there is
+   any pending output for the current line, flush it and start a new
+   line.  Otherwise do nothing. */
+
+void
+begin_line ()
+{
+  if (chars_printed > 0)
+    {
+      puts_filtered ("\n");
+    }
+}
+
+int 
+gdb_file_isatty (stream)
+    GDB_FILE *stream;
+{
+
+  if (stream->ts_streamtype == afile)
+     return (isatty(fileno(stream->ts_filestream)));
+  else return 0;
+}
+
+GDB_FILE *
+gdb_file_init_astring (n)
+    int n;
+{
+  GDB_FILE *tmpstream;
+
+  tmpstream = xmalloc (sizeof(GDB_FILE));
+  tmpstream->ts_streamtype = astring;
+  tmpstream->ts_filestream = NULL;
+  if (n > 0)
+    {
+      tmpstream->ts_strbuf = xmalloc ((n + 1)*sizeof(char));
+      tmpstream->ts_strbuf[0] = '\0';
+    }
+  else
+     tmpstream->ts_strbuf = NULL;
+  tmpstream->ts_buflen = n;
+
+  return tmpstream;
+}
+
+void
+gdb_file_deallocate (streamptr)
+    GDB_FILE **streamptr;
+{
+  GDB_FILE *tmpstream;
+
+  tmpstream = *streamptr;
+  if ((tmpstream->ts_streamtype == astring) &&
+      (tmpstream->ts_strbuf != NULL)) 
+    {
+      free (tmpstream->ts_strbuf);
+    }
+
+  free (tmpstream);
+  *streamptr = NULL;
+}
+ 
+char *
+gdb_file_get_strbuf (stream)
+     GDB_FILE *stream;
+{
+  return (stream->ts_strbuf);
+}
+
+/* adjust the length of the buffer by the amount necessary
+   to accomodate appending a string of length N to the buffer contents */
+void
+gdb_file_adjust_strbuf (n, stream)
+     int n;
+     GDB_FILE *stream;
+{
+  int non_null_chars;
+  
+  non_null_chars = strlen(stream->ts_strbuf);
+ 
+  if (n > (stream->ts_buflen - non_null_chars - 1)) 
+    {
+      stream->ts_buflen = n + non_null_chars + 1;
+      stream->ts_strbuf = xrealloc (stream->ts_strbuf, stream->ts_buflen);
+    }  
+} 
+
+GDB_FILE *
+gdb_fopen (name, mode)
+     char * name;
+     char * mode;
+{
+  int       gdb_file_size;
+  GDB_FILE *tmp;
+
+  gdb_file_size = sizeof(GDB_FILE);
+  tmp = (GDB_FILE *) xmalloc (gdb_file_size);
+  tmp->ts_streamtype = afile;
+  tmp->ts_filestream = fopen (name, mode);
+  tmp->ts_strbuf = NULL;
+  tmp->ts_buflen = 0;
+  
+  return tmp;
+}
+
+void
+gdb_flush (stream)
+     GDB_FILE *stream;
+{
+  if (flush_hook
+      && (stream == gdb_stdout
+	  || stream == gdb_stderr))
+    {
+      flush_hook (stream);
+      return;
+    }
+
+  fflush (stream->ts_filestream);
+}
+
+void
+gdb_fclose(streamptr)
+     GDB_FILE **streamptr;
+{
+  GDB_FILE *tmpstream;
+
+  tmpstream = *streamptr;
+  fclose (tmpstream->ts_filestream);
+  gdb_file_deallocate (streamptr);
+}
+
+/* Like fputs but if FILTER is true, pause after every screenful.
+
+   Regardless of FILTER can wrap at points other than the final
+   character of a line.
+
+   Unlike fputs, fputs_maybe_filtered does not return a value.
+   It is OK for LINEBUFFER to be NULL, in which case just don't print
+   anything.
+
+   Note that a longjmp to top level may occur in this routine (only if
+   FILTER is true) (since prompt_for_continue may do so) so this
+   routine should not be called when cleanups are not in place.  */
+
+static void
+fputs_maybe_filtered (linebuffer, stream, filter)
+     const char *linebuffer;
+     GDB_FILE *stream;
+     int filter;
+{
+  const char *lineptr;
+
+  if (linebuffer == 0)
+    return;
+
+  /* Don't do any filtering if it is disabled.  */
+  if (stream != gdb_stdout
+   || (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
+    {
+      fputs_unfiltered (linebuffer, stream);
+      return;
+    }
+
+  /* Go through and output each character.  Show line extension
+     when this is necessary; prompt user for new page when this is
+     necessary.  */
+  
+  lineptr = linebuffer;
+  while (*lineptr)
+    {
+      /* Possible new page.  */
+      if (filter &&
+	  (lines_printed >= lines_per_page - 1))
+	prompt_for_continue ();
+
+      while (*lineptr && *lineptr != '\n')
+	{
+	  /* Print a single line.  */
+	  if (*lineptr == '\t')
+	    {
+	      if (wrap_column)
+		*wrap_pointer++ = '\t';
+	      else
+		fputc_unfiltered ('\t', stream);
+	      /* Shifting right by 3 produces the number of tab stops
+	         we have already passed, and then adding one and
+		 shifting left 3 advances to the next tab stop.  */
+	      chars_printed = ((chars_printed >> 3) + 1) << 3;
+	      lineptr++;
+	    }
+	  else
+	    {
+	      if (wrap_column)
+		*wrap_pointer++ = *lineptr;
+	      else
+	        fputc_unfiltered (*lineptr, stream);
+	      chars_printed++;
+	      lineptr++;
+	    }
+      
+	  if (chars_printed >= chars_per_line)
+	    {
+	      unsigned int save_chars = chars_printed;
+
+	      chars_printed = 0;
+	      lines_printed++;
+	      /* If we aren't actually wrapping, don't output newline --
+		 if chars_per_line is right, we probably just overflowed
+		 anyway; if it's wrong, let us keep going.  */
+	      if (wrap_column)
+		fputc_unfiltered ('\n', stream);
+
+	      /* Possible new page.  */
+	      if (lines_printed >= lines_per_page - 1)
+		prompt_for_continue ();
+
+	      /* Now output indentation and wrapped string */
+	      if (wrap_column)
+		{
+		  fputs_unfiltered (wrap_indent, stream);
+		  *wrap_pointer = '\0';	/* Null-terminate saved stuff */
+		  fputs_unfiltered (wrap_buffer, stream); /* and eject it */
+		  /* FIXME, this strlen is what prevents wrap_indent from
+		     containing tabs.  However, if we recurse to print it
+		     and count its chars, we risk trouble if wrap_indent is
+		     longer than (the user settable) chars_per_line. 
+		     Note also that this can set chars_printed > chars_per_line
+		     if we are printing a long string.  */
+		  chars_printed = strlen (wrap_indent)
+				+ (save_chars - wrap_column);
+		  wrap_pointer = wrap_buffer;	/* Reset buffer */
+		  wrap_buffer[0] = '\0';
+		  wrap_column = 0;		/* And disable fancy wrap */
+ 		}
+	    }
+	}
+
+      if (*lineptr == '\n')
+	{
+	  chars_printed = 0;
+	  wrap_here ((char *)0);  /* Spit out chars, cancel further wraps */
+	  lines_printed++;
+	  fputc_unfiltered ('\n', stream);
+	  lineptr++;
+	}
+    }
+}
+
+void
+fputs_filtered (linebuffer, stream)
+     const char *linebuffer;
+     GDB_FILE *stream;
+{
+  fputs_maybe_filtered (linebuffer, stream, 1);
+}
+
+int
+putchar_unfiltered (c)
+     int c;
+{
+  char buf[2];
+
+  buf[0] = c;
+  buf[1] = 0;
+  fputs_unfiltered (buf, gdb_stdout);
+  return c;
+}
+
+int
+fputc_unfiltered (c, stream)
+     int c;
+     GDB_FILE * stream;
+{
+  char buf[2];
+
+  buf[0] = c;
+  buf[1] = 0;
+  fputs_unfiltered (buf, stream);
+  return c;
+}
+
+int
+fputc_filtered (c, stream)
+     int c;
+     GDB_FILE * stream;
+{
+  char buf[2];
+
+  buf[0] = c;
+  buf[1] = 0;
+  fputs_filtered (buf, stream);
+  return c;
+}
+
+/* puts_debug is like fputs_unfiltered, except it prints special
+   characters in printable fashion.  */
+
+void
+puts_debug (prefix, string, suffix)
+     char *prefix;
+     char *string;
+     char *suffix;
+{
+  int ch;
+
+  /* Print prefix and suffix after each line.  */
+  static int new_line = 1;
+  static int return_p = 0;
+  static char *prev_prefix = "";
+  static char *prev_suffix = "";
+
+  if (*string == '\n')
+    return_p = 0;
+
+  /* If the prefix is changing, print the previous suffix, a new line,
+     and the new prefix.  */
+  if ((return_p || (strcmp(prev_prefix, prefix) != 0)) && !new_line)
+    {
+      fputs_unfiltered (prev_suffix, gdb_stderr);
+      fputs_unfiltered ("\n", gdb_stderr);
+      fputs_unfiltered (prefix, gdb_stderr);
+    }
+
+  /* Print prefix if we printed a newline during the previous call.  */
+  if (new_line)
+    {
+      new_line = 0;
+      fputs_unfiltered (prefix, gdb_stderr);
+    }
+
+  prev_prefix = prefix;
+  prev_suffix = suffix;
+
+  /* Output characters in a printable format.  */
+  while ((ch = *string++) != '\0')
+    {
+      switch (ch)
+        {
+	default:
+	  if (isprint (ch))
+	    fputc_unfiltered (ch, gdb_stderr);
+
+	  else
+	    fprintf_unfiltered (gdb_stderr, "\\x%02x", ch & 0xff);
+	  break;
+
+	case '\\': fputs_unfiltered ("\\\\",  gdb_stderr);	break;
+	case '\b': fputs_unfiltered ("\\b",   gdb_stderr);	break;
+	case '\f': fputs_unfiltered ("\\f",   gdb_stderr);	break;
+	case '\n': new_line = 1;
+		   fputs_unfiltered ("\\n",   gdb_stderr);	break;
+	case '\r': fputs_unfiltered ("\\r",   gdb_stderr);	break;
+	case '\t': fputs_unfiltered ("\\t",   gdb_stderr);	break;
+	case '\v': fputs_unfiltered ("\\v",   gdb_stderr);	break;
+        }
+
+      return_p = ch == '\r';
+    }
+
+  /* Print suffix if we printed a newline.  */
+  if (new_line)
+    {
+      fputs_unfiltered (suffix, gdb_stderr);
+      fputs_unfiltered ("\n", gdb_stderr);
+    }
+}
+
+
+/* Print a variable number of ARGS using format FORMAT.  If this
+   information is going to put the amount written (since the last call
+   to REINITIALIZE_MORE_FILTER or the last page break) over the page size,
+   call prompt_for_continue to get the users permision to continue.
+
+   Unlike fprintf, this function does not return a value.
+
+   We implement three variants, vfprintf (takes a vararg list and stream),
+   fprintf (takes a stream to write on), and printf (the usual).
+
+   Note also that a longjmp to top level may occur in this routine
+   (since prompt_for_continue may do so) so this routine should not be
+   called when cleanups are not in place.  */
+
+static void
+vfprintf_maybe_filtered (stream, format, args, filter)
+     GDB_FILE *stream;
+     const char *format;
+     va_list args;
+     int filter;
+{
+  char *linebuffer;
+  struct cleanup *old_cleanups;
+
+  vasprintf (&linebuffer, format, args);
+  if (linebuffer == NULL)
+    {
+      fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+      exit (1);
+    }
+  old_cleanups = make_cleanup (free, linebuffer);
+  fputs_maybe_filtered (linebuffer, stream, filter);
+  do_cleanups (old_cleanups);
+}
+
+
+void
+vfprintf_filtered (stream, format, args)
+     GDB_FILE *stream;
+     const char *format;
+     va_list args;
+{
+  vfprintf_maybe_filtered (stream, format, args, 1);
+}
+
+void
+vfprintf_unfiltered (stream, format, args)
+     GDB_FILE *stream;
+     const char *format;
+     va_list args;
+{
+  char *linebuffer;
+  struct cleanup *old_cleanups;
+
+  vasprintf (&linebuffer, format, args);
+  if (linebuffer == NULL)
+    {
+      fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+      exit (1);
+    }
+  old_cleanups = make_cleanup (free, linebuffer);
+  fputs_unfiltered (linebuffer, stream);
+  do_cleanups (old_cleanups);
+}
+
+void
+vprintf_filtered (format, args)
+     const char *format;
+     va_list args;
+{
+  vfprintf_maybe_filtered (gdb_stdout, format, args, 1);
+}
+
+void
+vprintf_unfiltered (format, args)
+     const char *format;
+     va_list args;
+{
+  vfprintf_unfiltered (gdb_stdout, format, args);
+}
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+fprintf_filtered (GDB_FILE *stream, const char *format, ...)
+#else
+fprintf_filtered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  GDB_FILE *stream;
+  char *format;
+
+  va_start (args);
+  stream = va_arg (args, GDB_FILE *);
+  format = va_arg (args, char *);
+#endif
+  vfprintf_filtered (stream, format, args);
+  va_end (args);
+}
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+fprintf_unfiltered (GDB_FILE *stream, const char *format, ...)
+#else
+fprintf_unfiltered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  GDB_FILE *stream;
+  char *format;
+
+  va_start (args);
+  stream = va_arg (args, GDB_FILE *);
+  format = va_arg (args, char *);
+#endif
+  vfprintf_unfiltered (stream, format, args);
+  va_end (args);
+}
+
+/* Like fprintf_filtered, but prints its result indented.
+   Called as fprintfi_filtered (spaces, stream, format, ...);  */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+fprintfi_filtered (int spaces, GDB_FILE *stream, const char *format, ...)
+#else
+fprintfi_filtered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  int spaces;
+  GDB_FILE *stream;
+  char *format;
+
+  va_start (args);
+  spaces = va_arg (args, int);
+  stream = va_arg (args, GDB_FILE *);
+  format = va_arg (args, char *);
+#endif
+  print_spaces_filtered (spaces, stream);
+
+  vfprintf_filtered (stream, format, args);
+  va_end (args);
+}
+
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+printf_filtered (const char *format, ...)
+#else
+printf_filtered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  char *format;
+
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+  vfprintf_filtered (gdb_stdout, format, args);
+  va_end (args);
+}
+
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+printf_unfiltered (const char *format, ...)
+#else
+printf_unfiltered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  char *format;
+
+  va_start (args);
+  format = va_arg (args, char *);
+#endif
+  vfprintf_unfiltered (gdb_stdout, format, args);
+  va_end (args);
+}
+
+/* Like printf_filtered, but prints it's result indented.
+   Called as printfi_filtered (spaces, format, ...);  */
+
+/* VARARGS */
+void
+#ifdef ANSI_PROTOTYPES
+printfi_filtered (int spaces, const char *format, ...)
+#else
+printfi_filtered (va_alist)
+     va_dcl
+#endif
+{
+  va_list args;
+#ifdef ANSI_PROTOTYPES
+  va_start (args, format);
+#else
+  int spaces;
+  char *format;
+
+  va_start (args);
+  spaces = va_arg (args, int);
+  format = va_arg (args, char *);
+#endif
+  print_spaces_filtered (spaces, gdb_stdout);
+  vfprintf_filtered (gdb_stdout, format, args);
+  va_end (args);
+}
+
+/* Easy -- but watch out!
+
+   This routine is *not* a replacement for puts()!  puts() appends a newline.
+   This one doesn't, and had better not!  */
+
+void
+puts_filtered (string)
+     const char *string;
+{
+  fputs_filtered (string, gdb_stdout);
+}
+
+void
+puts_unfiltered (string)
+     const char *string;
+{
+  fputs_unfiltered (string, gdb_stdout);
+}
+
+/* Return a pointer to N spaces and a null.  The pointer is good
+   until the next call to here.  */
+char *
+n_spaces (n)
+     int n;
+{
+  register char *t;
+  static char *spaces;
+  static int max_spaces;
+
+  if (n > max_spaces)
+    {
+      if (spaces)
+	free (spaces);
+      spaces = (char *) xmalloc (n+1);
+      for (t = spaces+n; t != spaces;)
+	*--t = ' ';
+      spaces[n] = '\0';
+      max_spaces = n;
+    }
+
+  return spaces + max_spaces - n;
+}
+
+/* Print N spaces.  */
+void
+print_spaces_filtered (n, stream)
+     int n;
+     GDB_FILE *stream;
+{
+  fputs_filtered (n_spaces (n), stream);
+}
+
+/* C++ demangler stuff.  */
+
+/* fprintf_symbol_filtered attempts to demangle NAME, a symbol in language
+   LANG, using demangling args ARG_MODE, and print it filtered to STREAM.
+   If the name is not mangled, or the language for the name is unknown, or
+   demangling is off, the name is printed in its "raw" form. */
+
+void
+fprintf_symbol_filtered (stream, name, lang, arg_mode)
+     GDB_FILE *stream;
+     char *name;
+     enum language lang;
+     int arg_mode;
+{
+  char *demangled;
+
+  if (name != NULL)
+    {
+      /* If user wants to see raw output, no problem.  */
+      if (!demangle)
+	{
+	  fputs_filtered (name, stream);
+	}
+      else
+	{
+	  switch (lang)
+	    {
+	    case language_cplus:
+	      demangled = cplus_demangle (name, arg_mode);
+	      break;
+	    case language_java:
+	      demangled = cplus_demangle (name, arg_mode | DMGL_JAVA);
+	      break;
+	    case language_chill:
+	      demangled = chill_demangle (name);
+	      break;
+	    default:
+	      demangled = NULL;
+	      break;
+	    }
+	  fputs_filtered (demangled ? demangled : name, stream);
+	  if (demangled != NULL)
+	    {
+	      free (demangled);
+	    }
+	}
+    }
+}
+
+/* Do a strcmp() type operation on STRING1 and STRING2, ignoring any
+   differences in whitespace.  Returns 0 if they match, non-zero if they
+   don't (slightly different than strcmp()'s range of return values).
+   
+   As an extra hack, string1=="FOO(ARGS)" matches string2=="FOO".
+   This "feature" is useful when searching for matching C++ function names
+   (such as if the user types 'break FOO', where FOO is a mangled C++
+   function). */
+
+int
+strcmp_iw (string1, string2)
+     const char *string1;
+     const char *string2;
+{
+  while ((*string1 != '\0') && (*string2 != '\0'))
+    {
+      while (isspace (*string1))
+	{
+	  string1++;
+	}
+      while (isspace (*string2))
+	{
+	  string2++;
+	}
+      if (*string1 != *string2)
+	{
+	  break;
+	}
+      if (*string1 != '\0')
+	{
+	  string1++;
+	  string2++;
+	}
+    }
+  return (*string1 != '\0' && *string1 != '(') || (*string2 != '\0');
+}
+
+
+/*
+** subsetCompare()
+**    Answer whether stringToCompare is a full or partial match to
+**    templateString.  The partial match must be in sequence starting
+**    at index 0.
+*/
+int
+#ifdef _STDC__
+subsetCompare(
+    char *stringToCompare,
+    char *templateString)
+#else
+subsetCompare(stringToCompare, templateString)
+    char *stringToCompare;
+    char *templateString;
+#endif
+{
+    int    match = 0;
+
+    if (templateString != (char *)NULL && stringToCompare != (char *)NULL &&
+	strlen(stringToCompare) <= strlen(templateString))
+      match = (strncmp(templateString,
+		       stringToCompare,
+		       strlen(stringToCompare)) == 0);
+
+    return match;
+} /* subsetCompare */
+
+
+void pagination_on_command(arg, from_tty)
+  char *arg;
+  int from_tty;
+{
+  pagination_enabled = 1;
+}
+
+void pagination_off_command(arg, from_tty)
+  char *arg;
+  int from_tty;
+{
+  pagination_enabled = 0;
+}
+
+
+void
+initialize_utils ()
+{
+  struct cmd_list_element *c;
+
+  c = add_set_cmd ("width", class_support, var_uinteger, 
+		  (char *)&chars_per_line,
+		  "Set number of characters gdb thinks are in a line.",
+		  &setlist);
+  add_show_from_set (c, &showlist);
+  c->function.sfunc = set_width_command;
+
+  add_show_from_set
+    (add_set_cmd ("height", class_support,
+		  var_uinteger, (char *)&lines_per_page,
+		  "Set number of lines gdb thinks are in a page.", &setlist),
+     &showlist);
+  
+  init_page_info ();
+
+  /* If the output is not a terminal, don't paginate it.  */
+  if (!GDB_FILE_ISATTY (gdb_stdout))
+    lines_per_page = UINT_MAX;
+
+  set_width_command ((char *)NULL, 0, c);
+
+  add_show_from_set
+    (add_set_cmd ("demangle", class_support, var_boolean, 
+		  (char *)&demangle,
+		"Set demangling of encoded C++ names when displaying symbols.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("pagination", class_support,
+		  var_boolean, (char *)&pagination_enabled,
+		  "Set state of pagination.", &setlist),
+     &showlist);
+  if (xdb_commands)
+    {
+      add_com("am", class_support, pagination_on_command, 
+              "Enable pagination");
+      add_com("sm", class_support, pagination_off_command, 
+              "Disable pagination");
+    }
+
+  add_show_from_set
+    (add_set_cmd ("sevenbit-strings", class_support, var_boolean, 
+		  (char *)&sevenbit_strings,
+   "Set printing of 8-bit characters in strings as \\nnn.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("asm-demangle", class_support, var_boolean, 
+		  (char *)&asm_demangle,
+	"Set demangling of C++ names in disassembly listings.",
+		  &setprintlist),
+     &showprintlist);
+}
+
+/* Machine specific function to handle SIGWINCH signal. */
+
+#ifdef  SIGWINCH_HANDLER_BODY
+        SIGWINCH_HANDLER_BODY
+#endif
+
+/* Support for converting target fp numbers into host DOUBLEST format.  */
+
+/* XXX - This code should really be in libiberty/floatformat.c, however
+   configuration issues with libiberty made this very difficult to do in the
+   available time.  */
+
+#include "floatformat.h"
+#include <math.h>		/* ldexp */
+
+/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
+   going to bother with trying to muck around with whether it is defined in
+   a system header, what we do if not, etc.  */
+#define FLOATFORMAT_CHAR_BIT 8
+
+static unsigned long get_field PARAMS ((unsigned char *,
+					enum floatformat_byteorders,
+					unsigned int,
+					unsigned int,
+					unsigned int));
+
+/* Extract a field which starts at START and is LEN bytes long.  DATA and
+   TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER.  */
+static unsigned long
+get_field (data, order, total_len, start, len)
+     unsigned char *data;
+     enum floatformat_byteorders order;
+     unsigned int total_len;
+     unsigned int start;
+     unsigned int len;
+{
+  unsigned long result;
+  unsigned int cur_byte;
+  int cur_bitshift;
+
+  /* Start at the least significant part of the field.  */
+  cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+  if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+    cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
+  cur_bitshift =
+    ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+  result = *(data + cur_byte) >> (-cur_bitshift);
+  cur_bitshift += FLOATFORMAT_CHAR_BIT;
+  if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+    ++cur_byte;
+  else
+    --cur_byte;
+
+  /* Move towards the most significant part of the field.  */
+  while (cur_bitshift < len)
+    {
+      if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
+	/* This is the last byte; zero out the bits which are not part of
+	   this field.  */
+	result |=
+	  (*(data + cur_byte) & ((1 << (len - cur_bitshift)) - 1))
+	    << cur_bitshift;
+      else
+	result |= *(data + cur_byte) << cur_bitshift;
+      cur_bitshift += FLOATFORMAT_CHAR_BIT;
+      if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+	++cur_byte;
+      else
+	--cur_byte;
+    }
+  return result;
+}
+  
+/* Convert from FMT to a DOUBLEST.
+   FROM is the address of the extended float.
+   Store the DOUBLEST in *TO.  */
+
+void
+floatformat_to_doublest (fmt, from, to)
+     const struct floatformat *fmt;
+     char *from;
+     DOUBLEST *to;
+{
+  unsigned char *ufrom = (unsigned char *)from;
+  DOUBLEST dto;
+  long exponent;
+  unsigned long mant;
+  unsigned int mant_bits, mant_off;
+  int mant_bits_left;
+  int special_exponent;		/* It's a NaN, denorm or zero */
+
+  /* If the mantissa bits are not contiguous from one end of the
+     mantissa to the other, we need to make a private copy of the
+     source bytes that is in the right order since the unpacking
+     algorithm assumes that the bits are contiguous.
+
+     Swap the bytes individually rather than accessing them through
+     "long *" since we have no guarantee that they start on a long
+     alignment, and also sizeof(long) for the host could be different
+     than sizeof(long) for the target.  FIXME: Assumes sizeof(long)
+     for the target is 4. */
+
+  if (fmt -> byteorder == floatformat_littlebyte_bigword)
+    {
+      static unsigned char *newfrom;
+      unsigned char *swapin, *swapout;
+      int longswaps;
+
+      longswaps = fmt -> totalsize / FLOATFORMAT_CHAR_BIT;
+      longswaps >>= 3;
+      
+      if (newfrom == NULL)
+	{
+	  newfrom = (unsigned char *) xmalloc (fmt -> totalsize);
+	}
+      swapout = newfrom;
+      swapin = ufrom;
+      ufrom = newfrom;
+      while (longswaps-- > 0)
+	{
+	  /* This is ugly, but efficient */
+	  *swapout++ = swapin[4];
+	  *swapout++ = swapin[5];
+	  *swapout++ = swapin[6];
+	  *swapout++ = swapin[7];
+	  *swapout++ = swapin[0];
+	  *swapout++ = swapin[1];
+	  *swapout++ = swapin[2];
+	  *swapout++ = swapin[3];
+	  swapin += 8;
+	}
+    }
+
+  exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
+			fmt->exp_start, fmt->exp_len);
+  /* Note that if exponent indicates a NaN, we can't really do anything useful
+     (not knowing if the host has NaN's, or how to build one).  So it will
+     end up as an infinity or something close; that is OK.  */
+
+  mant_bits_left = fmt->man_len;
+  mant_off = fmt->man_start;
+  dto = 0.0;
+
+  special_exponent = exponent == 0 || exponent == fmt->exp_nan;
+
+/* Don't bias zero's, denorms or NaNs.  */
+  if (!special_exponent)
+    exponent -= fmt->exp_bias;
+
+  /* Build the result algebraically.  Might go infinite, underflow, etc;
+     who cares. */
+
+/* If this format uses a hidden bit, explicitly add it in now.  Otherwise,
+   increment the exponent by one to account for the integer bit.  */
+
+  if (!special_exponent)
+    if (fmt->intbit == floatformat_intbit_no)
+      dto = ldexp (1.0, exponent);
+    else
+      exponent++;
+
+  while (mant_bits_left > 0)
+    {
+      mant_bits = min (mant_bits_left, 32);
+
+      mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
+			 mant_off, mant_bits);
+
+      dto += ldexp ((double)mant, exponent - mant_bits);
+      exponent -= mant_bits;
+      mant_off += mant_bits;
+      mant_bits_left -= mant_bits;
+    }
+
+  /* Negate it if negative.  */
+  if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
+    dto = -dto;
+  *to = dto;
+}
+
+static void put_field PARAMS ((unsigned char *, enum floatformat_byteorders,
+			       unsigned int,
+			       unsigned int,
+			       unsigned int,
+			       unsigned long));
+
+/* Set a field which starts at START and is LEN bytes long.  DATA and
+   TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER.  */
+static void
+put_field (data, order, total_len, start, len, stuff_to_put)
+     unsigned char *data;
+     enum floatformat_byteorders order;
+     unsigned int total_len;
+     unsigned int start;
+     unsigned int len;
+     unsigned long stuff_to_put;
+{
+  unsigned int cur_byte;
+  int cur_bitshift;
+
+  /* Start at the least significant part of the field.  */
+  cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+  if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+    cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
+  cur_bitshift =
+    ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+  *(data + cur_byte) &=
+    ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1) << (-cur_bitshift));
+  *(data + cur_byte) |=
+    (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
+  cur_bitshift += FLOATFORMAT_CHAR_BIT;
+  if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+    ++cur_byte;
+  else
+    --cur_byte;
+
+  /* Move towards the most significant part of the field.  */
+  while (cur_bitshift < len)
+    {
+      if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
+	{
+	  /* This is the last byte.  */
+	  *(data + cur_byte) &=
+	    ~((1 << (len - cur_bitshift)) - 1);
+	  *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
+	}
+      else
+	*(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
+			      & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
+      cur_bitshift += FLOATFORMAT_CHAR_BIT;
+      if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+	++cur_byte;
+      else
+	--cur_byte;
+    }
+}
+
+#ifdef HAVE_LONG_DOUBLE
+/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
+   The range of the returned value is >= 0.5 and < 1.0.  This is equivalent to
+   frexp, but operates on the long double data type.  */
+
+static long double ldfrexp PARAMS ((long double value, int *eptr));
+
+static long double
+ldfrexp (value, eptr)
+     long double value;
+     int *eptr;
+{
+  long double tmp;
+  int exp;
+
+  /* Unfortunately, there are no portable functions for extracting the exponent
+     of a long double, so we have to do it iteratively by multiplying or dividing
+     by two until the fraction is between 0.5 and 1.0.  */
+
+  if (value < 0.0l)
+    value = -value;
+
+  tmp = 1.0l;
+  exp = 0;
+
+  if (value >= tmp)		/* Value >= 1.0 */
+    while (value >= tmp)
+      {
+	tmp *= 2.0l;
+	exp++;
+      }
+  else if (value != 0.0l)	/* Value < 1.0  and > 0.0 */
+    {
+      while (value < tmp)
+	{
+	  tmp /= 2.0l;
+	  exp--;
+	}
+      tmp *= 2.0l;
+      exp++;
+    }
+
+  *eptr = exp;
+  return value/tmp;
+}
+#endif /* HAVE_LONG_DOUBLE */
+
+
+/* The converse: convert the DOUBLEST *FROM to an extended float
+   and store where TO points.  Neither FROM nor TO have any alignment
+   restrictions.  */
+
+void
+floatformat_from_doublest (fmt, from, to)
+     CONST struct floatformat *fmt;
+     DOUBLEST *from;
+     char *to;
+{
+  DOUBLEST dfrom;
+  int exponent;
+  DOUBLEST mant;
+  unsigned int mant_bits, mant_off;
+  int mant_bits_left;
+  unsigned char *uto = (unsigned char *)to;
+
+  memcpy (&dfrom, from, sizeof (dfrom));
+  memset (uto, 0, fmt->totalsize / FLOATFORMAT_CHAR_BIT);
+  if (dfrom == 0)
+    return;			/* Result is zero */
+  if (dfrom != dfrom)		/* Result is NaN */
+    {
+      /* From is NaN */
+      put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
+		 fmt->exp_len, fmt->exp_nan);
+      /* Be sure it's not infinity, but NaN value is irrel */
+      put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
+		 32, 1);
+      return;
+    }
+
+  /* If negative, set the sign bit.  */
+  if (dfrom < 0)
+    {
+      put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
+      dfrom = -dfrom;
+    }
+
+  if (dfrom + dfrom == dfrom && dfrom != 0.0)	/* Result is Infinity */
+    {
+      /* Infinity exponent is same as NaN's.  */
+      put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
+		 fmt->exp_len, fmt->exp_nan);
+      /* Infinity mantissa is all zeroes.  */
+      put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
+		 fmt->man_len, 0);
+      return;
+    }
+
+#ifdef HAVE_LONG_DOUBLE
+  mant = ldfrexp (dfrom, &exponent);
+#else
+  mant = frexp (dfrom, &exponent);
+#endif
+
+  put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
+	     exponent + fmt->exp_bias - 1);
+
+  mant_bits_left = fmt->man_len;
+  mant_off = fmt->man_start;
+  while (mant_bits_left > 0)
+    {
+      unsigned long mant_long;
+      mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
+
+      mant *= 4294967296.0;
+      mant_long = (unsigned long)mant;
+      mant -= mant_long;
+
+      /* If the integer bit is implicit, then we need to discard it.
+	 If we are discarding a zero, we should be (but are not) creating
+	 a denormalized	number which means adjusting the exponent
+	 (I think).  */
+      if (mant_bits_left == fmt->man_len
+	  && fmt->intbit == floatformat_intbit_no)
+	{
+	  mant_long <<= 1;
+	  mant_bits -= 1;
+	}
+
+      if (mant_bits < 32)
+	{
+	  /* The bits we want are in the most significant MANT_BITS bits of
+	     mant_long.  Move them to the least significant.  */
+	  mant_long >>= 32 - mant_bits;
+	}
+
+      put_field (uto, fmt->byteorder, fmt->totalsize,
+		 mant_off, mant_bits, mant_long);
+      mant_off += mant_bits;
+      mant_bits_left -= mant_bits;
+    }
+  if (fmt -> byteorder == floatformat_littlebyte_bigword)
+    {
+      int count;
+      unsigned char *swaplow = uto;
+      unsigned char *swaphigh = uto + 4;
+      unsigned char tmp;
+
+      for (count = 0; count < 4; count++)
+	{
+	  tmp = *swaplow;
+	  *swaplow++ = *swaphigh;
+	  *swaphigh++ = tmp;
+	}
+    }
+}
+
+/* temporary storage using circular buffer */
+#define NUMCELLS 16
+#define CELLSIZE 32
+static char*
+get_cell()
+{
+  static char buf[NUMCELLS][CELLSIZE];
+  static int cell=0;
+  if (++cell>=NUMCELLS) cell=0;
+  return buf[cell];
+}
+
+/* print routines to handle variable size regs, etc.
+
+   FIXME: Note that t_addr is a bfd_vma, which is currently either an
+   unsigned long or unsigned long long, determined at configure time.
+   If t_addr is an unsigned long long and sizeof (unsigned long long)
+   is greater than sizeof (unsigned long), then I believe this code will
+   probably lose, at least for little endian machines.  I believe that
+   it would also be better to eliminate the switch on the absolute size
+   of t_addr and replace it with a sequence of if statements that compare
+   sizeof t_addr with sizeof the various types and do the right thing,
+   which includes knowing whether or not the host supports long long.
+   -fnf
+
+ */
+
+static int thirty_two = 32;	/* eliminate warning from compiler on 32-bit systems */
+
+char* 
+paddr(addr)
+  t_addr addr;
+{
+  char *paddr_str=get_cell();
+  switch (sizeof(t_addr))
+    {
+      case 8:
+        sprintf (paddr_str, "%08lx%08lx",
+		(unsigned long) (addr >> thirty_two), (unsigned long) (addr & 0xffffffff));
+	break;
+      case 4:
+        sprintf (paddr_str, "%08lx", (unsigned long) addr);
+	break;
+      case 2:
+        sprintf (paddr_str, "%04x", (unsigned short) (addr & 0xffff));
+	break;
+      default:
+        sprintf (paddr_str, "%lx", (unsigned long) addr);
+    }
+  return paddr_str;
+}
+
+char* 
+preg(reg)
+  t_reg reg;
+{
+  char *preg_str=get_cell();
+  switch (sizeof(t_reg))
+    {
+      case 8:
+        sprintf (preg_str, "%08lx%08lx",
+		(unsigned long) (reg >> thirty_two), (unsigned long) (reg & 0xffffffff));
+	break;
+      case 4:
+        sprintf (preg_str, "%08lx", (unsigned long) reg);
+	break;
+      case 2:
+        sprintf (preg_str, "%04x", (unsigned short) (reg & 0xffff));
+	break;
+      default:
+        sprintf (preg_str, "%lx", (unsigned long) reg);
+    }
+  return preg_str;
+}
+
+char*
+paddr_nz(addr)
+  t_addr addr;
+{
+  char *paddr_str=get_cell();
+  switch (sizeof(t_addr))
+    {
+      case 8:
+	{
+	  unsigned long high = (unsigned long) (addr >> thirty_two);
+	  if (high == 0)
+	    sprintf (paddr_str, "%lx", (unsigned long) (addr & 0xffffffff));
+	  else
+	    sprintf (paddr_str, "%lx%08lx",
+		    high, (unsigned long) (addr & 0xffffffff));
+	  break;
+	}
+      case 4:
+        sprintf (paddr_str, "%lx", (unsigned long) addr);
+	break;
+      case 2:
+        sprintf (paddr_str, "%x", (unsigned short) (addr & 0xffff));
+	break;
+      default:
+        sprintf (paddr_str,"%lx", (unsigned long) addr);
+    }
+  return paddr_str;
+}
+
+char*
+preg_nz(reg)
+  t_reg reg;
+{
+  char *preg_str=get_cell();
+  switch (sizeof(t_reg))
+    {
+      case 8:
+	{
+	  unsigned long high = (unsigned long) (reg >> thirty_two);
+	  if (high == 0)
+	    sprintf (preg_str, "%lx", (unsigned long) (reg & 0xffffffff));
+	  else
+	    sprintf (preg_str, "%lx%08lx",
+		    high, (unsigned long) (reg & 0xffffffff));
+	  break;
+	}
+      case 4:
+        sprintf (preg_str, "%lx", (unsigned long) reg);
+	break;
+      case 2:
+        sprintf (preg_str, "%x", (unsigned short) (reg & 0xffff));
+	break;
+      default:
+        sprintf (preg_str, "%lx", (unsigned long) reg);
+    }
+  return preg_str;
+}
diff --git a/gdb/v850-tdep.c b/gdb/v850-tdep.c
new file mode 100644
index 0000000..b98a4bd
--- /dev/null
+++ b/gdb/v850-tdep.c
@@ -0,0 +1,884 @@
+/* Target-dependent code for the NEC V850 for GDB, the GNU debugger.
+   Copyright 1996, Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "obstack.h"
+#include "target.h"
+#include "value.h"
+#include "bfd.h"
+#include "gdb_string.h"
+#include "gdbcore.h"
+#include "symfile.h"
+
+
+static char *v850_generic_reg_names[] = REGISTER_NAMES;
+
+static char *v850e_reg_names[] =
+{
+  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+  "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
+  "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
+  "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "sr21", "sr22", "sr23",
+  "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
+  "pc", "fp"
+};
+
+char **v850_register_names = v850_generic_reg_names;
+
+struct
+{
+  char **regnames;
+  int mach;
+} v850_processor_type_table[] =
+{
+  { v850_generic_reg_names, bfd_mach_v850 },
+  { v850e_reg_names, bfd_mach_v850e },
+  { v850e_reg_names, bfd_mach_v850ea },
+  { NULL, 0 }
+};
+
+/* Info gleaned from scanning a function's prologue.  */
+
+struct pifsr			/* Info about one saved reg */
+{
+  int framereg;			/* Frame reg (SP or FP) */
+  int offset;			/* Offset from framereg */
+  int cur_frameoffset;		/* Current frameoffset */
+  int reg;			/* Saved register number */
+};
+
+struct prologue_info
+{
+  int framereg;
+  int frameoffset;
+  int start_function;
+  struct pifsr *pifsrs;
+};
+
+static CORE_ADDR v850_scan_prologue PARAMS ((CORE_ADDR pc, 
+					     struct prologue_info *fs));
+
+
+/* Should call_function allocate stack space for a struct return?  */
+int
+v850_use_struct_convention (gcc_p, type)
+     int gcc_p;
+     struct type *type;
+{
+  return (TYPE_NFIELDS (type) > 1 || TYPE_LENGTH (type) > 4);
+}
+
+
+
+/* Structure for mapping bits in register lists to register numbers. */
+struct reg_list 
+{
+  long mask;
+  int regno;
+};
+
+/* Helper function for v850_scan_prologue to handle prepare instruction. */
+
+static void
+handle_prepare (int insn, int insn2, CORE_ADDR *current_pc_ptr,
+		struct prologue_info *pi, struct pifsr **pifsr_ptr)
+
+{
+  CORE_ADDR current_pc = *current_pc_ptr;
+  struct pifsr *pifsr = *pifsr_ptr;
+  long next = insn2 & 0xffff;
+  long list12 = ((insn & 1) << 16) + (next & 0xffe0);
+  long offset = (insn & 0x3e) << 1;
+  static struct reg_list reg_table [] =
+  {
+    { 0x00800, 20 },	/* r20 */
+    { 0x00400, 21 },	/* r21 */
+    { 0x00200, 22 },	/* r22 */
+    { 0x00100, 23 },	/* r23 */
+    { 0x08000, 24 },	/* r24 */
+    { 0x04000, 25 },	/* r25 */
+    { 0x02000, 26 },	/* r26 */
+    { 0x01000, 27 },	/* r27 */
+    { 0x00080, 28 },	/* r28 */
+    { 0x00040, 29 },	/* r29 */
+    { 0x10000, 30 },	/* ep */
+    { 0x00020, 31 },	/* lp */
+    { 0, 0 }		/* end of table */
+  };
+  int i;
+
+  if ((next & 0x1f) == 0x0b)		/* skip imm16 argument */
+    current_pc += 2;
+  else if ((next & 0x1f) == 0x13)	/* skip imm16 argument */
+    current_pc += 2;
+  else if ((next & 0x1f) == 0x1b)	/* skip imm32 argument */
+    current_pc += 4;
+
+  /* Calculate the total size of the saved registers, and add it
+     it to the immediate value used to adjust SP. */
+  for (i = 0; reg_table[i].mask != 0; i++)
+    if (list12 & reg_table[i].mask)
+      offset += REGISTER_RAW_SIZE (regtable[i].regno);
+  pi->frameoffset -= offset;
+
+  /* Calculate the offsets of the registers relative to the value
+     the SP will have after the registers have been pushed and the
+     imm5 value has been subtracted from it. */
+  if (pifsr)
+    {
+      for (i = 0; reg_table[i].mask != 0; i++)
+	{
+	  if (list12 & reg_table[i].mask)
+	    {
+	      int reg = reg_table[i].regno;
+	      offset -= REGISTER_RAW_SIZE (reg);
+	      pifsr->reg = reg;
+	      pifsr->offset = offset;
+	      pifsr->cur_frameoffset = pi->frameoffset;
+    #ifdef DEBUG
+	      printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
+    #endif
+	      pifsr++;
+	    }
+	}
+    }
+#ifdef DEBUG
+  printf_filtered ("\tfound ctret after regsave func");
+#endif
+
+  /* Set result parameters. */
+  *current_pc_ptr = current_pc;
+  *pifsr_ptr = pifsr;
+}
+
+
+/* Helper function for v850_scan_prologue to handle pushm/pushl instructions.
+   FIXME: the SR bit of the register list is not supported; must check
+   that the compiler does not ever generate this bit. */
+
+static void
+handle_pushm (int insn, int insn2, struct prologue_info *pi,
+	     struct pifsr **pifsr_ptr)
+
+{
+  struct pifsr *pifsr = *pifsr_ptr;
+  long list12 = ((insn & 0x0f) << 16) + (insn2 & 0xfff0);
+  long offset = 0;
+  static struct reg_list pushml_reg_table [] =
+  {
+    { 0x80000, PS_REGNUM },	/* PSW */
+    { 0x40000, 1 },		/* r1 */
+    { 0x20000, 2 },		/* r2 */
+    { 0x10000, 3 },		/* r3 */
+    { 0x00800, 4 },		/* r4 */
+    { 0x00400, 5 },		/* r5 */
+    { 0x00200, 6 },		/* r6 */
+    { 0x00100, 7 },		/* r7 */
+    { 0x08000, 8 },		/* r8 */
+    { 0x04000, 9 },		/* r9 */
+    { 0x02000, 10 },		/* r10 */
+    { 0x01000, 11 },		/* r11 */
+    { 0x00080, 12 },		/* r12 */
+    { 0x00040, 13 },		/* r13 */
+    { 0x00020, 14 },		/* r14 */
+    { 0x00010, 15 },		/* r15 */
+    { 0, 0 }		/* end of table */
+  };
+  static struct reg_list pushmh_reg_table [] =
+  {
+    { 0x80000, 16 },		/* r16 */
+    { 0x40000, 17 },		/* r17 */
+    { 0x20000, 18 },		/* r18 */
+    { 0x10000, 19 },		/* r19 */
+    { 0x00800, 20 },		/* r20 */
+    { 0x00400, 21 },		/* r21 */
+    { 0x00200, 22 },		/* r22 */
+    { 0x00100, 23 },		/* r23 */
+    { 0x08000, 24 },		/* r24 */
+    { 0x04000, 25 },		/* r25 */
+    { 0x02000, 26 },		/* r26 */
+    { 0x01000, 27 },		/* r27 */
+    { 0x00080, 28 },		/* r28 */
+    { 0x00040, 29 },		/* r29 */
+    { 0x00010, 30 },		/* r30 */
+    { 0x00020, 31 },		/* r31 */
+    { 0, 0 }		/* end of table */
+  };
+  struct reg_list *reg_table;
+  int i;
+
+  /* Is this a pushml or a pushmh? */
+  if ((insn2 & 7) == 1)
+    reg_table = pushml_reg_table;
+  else
+    reg_table = pushmh_reg_table;
+
+  /* Calculate the total size of the saved registers, and add it
+     it to the immediate value used to adjust SP. */
+  for (i = 0; reg_table[i].mask != 0; i++)
+    if (list12 & reg_table[i].mask)
+      offset += REGISTER_RAW_SIZE (regtable[i].regno);
+  pi->frameoffset -= offset;
+
+  /* Calculate the offsets of the registers relative to the value
+     the SP will have after the registers have been pushed and the
+     imm5 value is subtracted from it. */
+  if (pifsr)
+    {
+      for (i = 0; reg_table[i].mask != 0; i++)
+	{
+	  if (list12 & reg_table[i].mask)
+	    {
+	      int reg = reg_table[i].regno;
+	      offset -= REGISTER_RAW_SIZE (reg);
+	      pifsr->reg = reg;
+	      pifsr->offset = offset;
+	      pifsr->cur_frameoffset = pi->frameoffset;
+    #ifdef DEBUG
+	      printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
+    #endif
+	      pifsr++;
+	    }
+	}
+    }
+#ifdef DEBUG
+  printf_filtered ("\tfound ctret after regsave func");
+#endif
+
+  /* Set result parameters. */
+  *pifsr_ptr = pifsr;
+}
+
+
+
+
+/* Function: scan_prologue
+   Scan the prologue of the function that contains PC, and record what
+   we find in PI.  PI->fsr must be zeroed by the called.  Returns the
+   pc after the prologue.  Note that the addresses saved in pi->fsr
+   are actually just frame relative (negative offsets from the frame
+   pointer).  This is because we don't know the actual value of the
+   frame pointer yet.  In some circumstances, the frame pointer can't
+   be determined till after we have scanned the prologue.  */
+
+static CORE_ADDR
+v850_scan_prologue (pc, pi)
+     CORE_ADDR pc;
+     struct prologue_info *pi;
+{
+  CORE_ADDR func_addr, prologue_end, current_pc;
+  struct pifsr *pifsr, *pifsr_tmp;
+  int fp_used;
+  int ep_used;
+  int reg;
+  CORE_ADDR save_pc, save_end;
+  int regsave_func_p;
+  int r12_tmp;
+
+  /* First, figure out the bounds of the prologue so that we can limit the
+     search to something reasonable.  */
+
+  if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
+    {
+      struct symtab_and_line sal;
+
+      sal = find_pc_line (func_addr, 0);
+
+      if (func_addr == entry_point_address ())
+	pi->start_function = 1;
+      else
+	pi->start_function = 0;
+
+#if 0
+      if (sal.line == 0)
+	prologue_end = pc;
+      else
+	prologue_end = sal.end;
+#else
+      prologue_end = pc;
+#endif
+    }
+  else
+    {				/* We're in the boondocks */
+      func_addr = pc - 100;
+      prologue_end = pc;
+    }
+
+  prologue_end = min (prologue_end, pc);
+
+  /* Now, search the prologue looking for instructions that setup fp, save
+     rp, adjust sp and such.  We also record the frame offset of any saved
+     registers. */ 
+
+  pi->frameoffset = 0;
+  pi->framereg = SP_REGNUM;
+  fp_used = 0;
+  ep_used = 0;
+  pifsr = pi->pifsrs;
+  regsave_func_p = 0;
+  save_pc = 0;
+  save_end = 0;
+  r12_tmp = 0;
+
+#ifdef DEBUG
+  printf_filtered ("Current_pc = 0x%.8lx, prologue_end = 0x%.8lx\n",
+		   (long)func_addr, (long)prologue_end);
+#endif
+
+  for (current_pc = func_addr; current_pc < prologue_end; )
+    {
+      int insn, insn2;
+
+#ifdef DEBUG
+      printf_filtered ("0x%.8lx ", (long)current_pc);
+      (*tm_print_insn) (current_pc, &tm_print_insn_info);
+#endif
+
+      insn = read_memory_unsigned_integer (current_pc, 2);
+      current_pc += 2;
+      if ((insn & 0x0780) >= 0x0600) /* Four byte instruction? */
+	{
+	  insn2 = read_memory_unsigned_integer (current_pc, 2);
+	  current_pc += 2;
+	}
+
+      if ((insn & 0xffc0) == ((10 << 11) | 0x0780) && !regsave_func_p)
+	{			/* jarl <func>,10 */
+	  long low_disp = insn2 & ~ (long) 1;
+	  long disp = (((((insn & 0x3f) << 16) + low_disp)
+			& ~ (long) 1) ^ 0x00200000) - 0x00200000;
+
+	  save_pc = current_pc;
+	  save_end = prologue_end;
+	  regsave_func_p = 1;
+	  current_pc += disp - 4;
+	  prologue_end = (current_pc
+			  + (2 * 3)	/* moves to/from ep */
+			  + 4		/* addi <const>,sp,sp */
+			  + 2		/* jmp [r10] */
+			  + (2 * 12)	/* sst.w to save r2, r20-r29, r31 */
+			  + 20);	/* slop area */
+
+#ifdef DEBUG
+	  printf_filtered ("\tfound jarl <func>,r10, disp = %ld, low_disp = %ld, new pc = 0x%.8lx\n",
+			   disp, low_disp, (long)current_pc + 2);
+#endif
+	  continue;
+	}
+      else if ((insn & 0xffc0) == 0x0200 && !regsave_func_p)
+	{			/* callt <imm6> */
+	  long ctbp = read_register (CTBP_REGNUM);
+	  long adr = ctbp + ((insn & 0x3f) << 1);
+
+	  save_pc = current_pc;
+	  save_end = prologue_end;
+	  regsave_func_p = 1;
+	  current_pc = ctbp + (read_memory_unsigned_integer (adr, 2) & 0xffff);
+	  prologue_end = (current_pc
+			  + (2 * 3)	/* prepare list2,imm5,sp/imm */
+			  + 4		/* ctret */
+			  + 20);	/* slop area */
+
+#ifdef DEBUG
+	  printf_filtered ("\tfound callt,  ctbp = 0x%.8lx, adr = %.8lx, new pc = 0x%.8lx\n",
+			   ctbp, adr, (long)current_pc);
+#endif
+	  continue;
+	}
+      else if ((insn & 0xffc0) == 0x0780)	/* prepare list2,imm5 */
+	{
+	  handle_prepare (insn, insn2, &current_pc, pi, &pifsr);
+	  continue;
+	}
+      else if (insn == 0x07e0 && regsave_func_p && insn2 == 0x0144)
+	{			/* ctret after processing register save function */
+	  current_pc = save_pc;
+	  prologue_end = save_end;
+	  regsave_func_p = 0;
+#ifdef DEBUG
+	  printf_filtered ("\tfound ctret after regsave func");
+#endif
+	  continue;
+	}
+      else if ((insn & 0xfff0) == 0x07e0 && (insn2 & 5) == 1)
+	{			/* pushml, pushmh */
+	  handle_pushm (insn, insn2, pi, &pifsr);
+	  continue;
+	}
+      else if ((insn & 0xffe0) == 0x0060 && regsave_func_p)
+	{			/* jmp after processing register save function */
+	  current_pc = save_pc;
+	  prologue_end = save_end;
+	  regsave_func_p = 0;
+#ifdef DEBUG
+	  printf_filtered ("\tfound jmp after regsave func");
+#endif
+	  continue;
+	}
+      else if ((insn & 0x07c0) == 0x0780	/* jarl or jr */
+	       || (insn & 0xffe0) == 0x0060	/* jmp */
+	       || (insn & 0x0780) == 0x0580)	/* branch */
+	{
+#ifdef DEBUG
+	  printf_filtered ("\n");
+#endif
+	  break;				/* Ran into end of prologue */
+	}
+
+      else if ((insn & 0xffe0) == ((SP_REGNUM << 11) | 0x0240))		/* add <imm>,sp */
+	pi->frameoffset += ((insn & 0x1f) ^ 0x10) - 0x10;
+      else if (insn == ((SP_REGNUM << 11) | 0x0600 | SP_REGNUM))	/* addi <imm>,sp,sp */
+	pi->frameoffset += insn2;
+      else if (insn == ((FP_RAW_REGNUM << 11) | 0x0000 | SP_REGNUM))	/* mov sp,fp */
+	{
+	  fp_used = 1;
+	  pi->framereg = FP_RAW_REGNUM;
+	}
+
+      else if (insn == ((R12_REGNUM << 11) | 0x0640 | R0_REGNUM))	/* movhi hi(const),r0,r12 */
+	r12_tmp = insn2 << 16;
+      else if (insn == ((R12_REGNUM << 11) | 0x0620 | R12_REGNUM))	/* movea lo(const),r12,r12 */
+	r12_tmp += insn2;
+      else if (insn == ((SP_REGNUM << 11) | 0x01c0 | R12_REGNUM) && r12_tmp) /* add r12,sp */
+	pi->frameoffset = r12_tmp;
+      else if (insn == ((EP_REGNUM << 11) | 0x0000 | SP_REGNUM))	/* mov sp,ep */
+	ep_used = 1;
+      else if (insn == ((EP_REGNUM << 11) | 0x0000 | R1_REGNUM))	/* mov r1,ep */
+	ep_used = 0;
+      else if (((insn & 0x07ff) == (0x0760 | SP_REGNUM)			/* st.w <reg>,<offset>[sp] */
+		|| (fp_used
+		    && (insn & 0x07ff) == (0x0760 | FP_RAW_REGNUM)))	/* st.w <reg>,<offset>[fp] */
+	       && pifsr
+	       && (((reg = (insn >> 11) & 0x1f) >= SAVE1_START_REGNUM && reg <= SAVE1_END_REGNUM)
+		   || (reg >= SAVE2_START_REGNUM && reg <= SAVE2_END_REGNUM)
+		   || (reg >= SAVE3_START_REGNUM && reg <= SAVE3_END_REGNUM)))
+	{
+	  pifsr->reg = reg;
+	  pifsr->offset = insn2 & ~1;
+	  pifsr->cur_frameoffset = pi->frameoffset;
+#ifdef DEBUG
+	  printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
+#endif
+	  pifsr++;
+	}
+
+      else if (ep_used						/* sst.w <reg>,<offset>[ep] */
+	       && ((insn & 0x0781) == 0x0501)
+	       && pifsr
+	       && (((reg = (insn >> 11) & 0x1f) >= SAVE1_START_REGNUM && reg <= SAVE1_END_REGNUM)
+		   || (reg >= SAVE2_START_REGNUM && reg <= SAVE2_END_REGNUM)
+		   || (reg >= SAVE3_START_REGNUM && reg <= SAVE3_END_REGNUM)))
+	{
+	  pifsr->reg = reg;
+	  pifsr->offset = (insn & 0x007e) << 1;
+	  pifsr->cur_frameoffset = pi->frameoffset;
+#ifdef DEBUG
+	  printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
+#endif
+	  pifsr++;
+	}
+
+#ifdef DEBUG
+      printf_filtered ("\n");
+#endif
+    }
+
+  if (pifsr)
+    pifsr->framereg = 0;	/* Tie off last entry */
+
+  /* Fix up any offsets to the final offset.  If a frame pointer was created, use it
+     instead of the stack pointer.  */
+  for (pifsr_tmp = pi->pifsrs; pifsr_tmp && pifsr_tmp != pifsr; pifsr_tmp++)
+    {
+      pifsr_tmp->offset -= pi->frameoffset - pifsr_tmp->cur_frameoffset;
+      pifsr_tmp->framereg = pi->framereg;
+
+#ifdef DEBUG
+      printf_filtered ("Saved register r%d, offset = %d, framereg = r%d\n",
+		       pifsr_tmp->reg, pifsr_tmp->offset, pifsr_tmp->framereg);
+#endif
+    }
+
+#ifdef DEBUG
+  printf_filtered ("Framereg = r%d, frameoffset = %d\n", pi->framereg, pi->frameoffset);
+#endif
+
+  return current_pc;
+}
+
+/* Function: init_extra_frame_info
+   Setup the frame's frame pointer, pc, and frame addresses for saved
+   registers.  Most of the work is done in scan_prologue().
+
+   Note that when we are called for the last frame (currently active frame),
+   that fi->pc and fi->frame will already be setup.  However, fi->frame will
+   be valid only if this routine uses FP.  For previous frames, fi-frame will
+   always be correct (since that is derived from v850_frame_chain ()).
+
+   We can be called with the PC in the call dummy under two circumstances.
+   First, during normal backtracing, second, while figuring out the frame
+   pointer just prior to calling the target function (see run_stack_dummy).  */
+
+void
+v850_init_extra_frame_info (fi)
+     struct frame_info *fi;
+{
+  struct prologue_info pi;
+  struct pifsr pifsrs[NUM_REGS + 1], *pifsr;
+
+  if (fi->next)
+    fi->pc = FRAME_SAVED_PC (fi->next);
+
+  memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
+
+  /* The call dummy doesn't save any registers on the stack, so we can return
+     now.  */
+  if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      return;
+
+  pi.pifsrs = pifsrs;
+
+  v850_scan_prologue (fi->pc, &pi);
+
+  if (!fi->next && pi.framereg == SP_REGNUM)
+    fi->frame = read_register (pi.framereg) - pi.frameoffset;
+
+  for (pifsr = pifsrs; pifsr->framereg; pifsr++)
+    {
+      fi->fsr.regs[pifsr->reg] = pifsr->offset + fi->frame;
+
+      if (pifsr->framereg == SP_REGNUM)
+	fi->fsr.regs[pifsr->reg] += pi.frameoffset;
+    }
+}
+
+/* Function: frame_chain
+   Figure out the frame prior to FI.  Unfortunately, this involves
+   scanning the prologue of the caller, which will also be done
+   shortly by v850_init_extra_frame_info.  For the dummy frame, we
+   just return the stack pointer that was in use at the time the
+   function call was made.  */
+
+CORE_ADDR
+v850_frame_chain (fi)
+     struct frame_info *fi;
+{
+  struct prologue_info pi;
+  CORE_ADDR callers_pc, fp;
+
+  /* First, find out who called us */
+  callers_pc = FRAME_SAVED_PC (fi);
+  /* If caller is a call-dummy, then our FP bears no relation to his FP! */
+  fp = v850_find_callers_reg (fi, FP_RAW_REGNUM);
+  if (PC_IN_CALL_DUMMY(callers_pc, fp, fp))
+    return fp;	/* caller is call-dummy: return oldest value of FP */
+
+  /* Caller is NOT a call-dummy, so everything else should just work.
+     Even if THIS frame is a call-dummy! */
+  pi.pifsrs = NULL;
+
+  v850_scan_prologue (callers_pc, &pi);
+
+  if (pi.start_function)
+    return 0;			/* Don't chain beyond the start function */
+
+  if (pi.framereg == FP_RAW_REGNUM)
+    return v850_find_callers_reg (fi, pi.framereg);
+
+  return fi->frame - pi.frameoffset;
+}
+
+/* Function: find_callers_reg
+   Find REGNUM on the stack.  Otherwise, it's in an active register.
+   One thing we might want to do here is to check REGNUM against the
+   clobber mask, and somehow flag it as invalid if it isn't saved on
+   the stack somewhere.  This would provide a graceful failure mode
+   when trying to get the value of caller-saves registers for an inner
+   frame.  */
+
+CORE_ADDR
+v850_find_callers_reg (fi, regnum)
+     struct frame_info *fi;
+     int regnum;
+{
+  for (; fi; fi = fi->next)
+    if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
+      return generic_read_register_dummy (fi->pc, fi->frame, regnum);
+    else if (fi->fsr.regs[regnum] != 0)
+      return read_memory_unsigned_integer (fi->fsr.regs[regnum], 
+					   REGISTER_RAW_SIZE(regnum));
+
+  return read_register (regnum);
+}
+
+/* Function: skip_prologue
+   Return the address of the first code past the prologue of the function.  */
+
+CORE_ADDR
+v850_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR func_addr, func_end;
+
+  /* See what the symbol table says */
+
+  if (find_pc_partial_function (pc, NULL, &func_addr, &func_end))
+    {
+      struct symtab_and_line sal;
+
+      sal = find_pc_line (func_addr, 0);
+
+      if (sal.line != 0 && sal.end < func_end)
+	return sal.end;
+      else
+	/* Either there's no line info, or the line after the prologue is after
+	   the end of the function.  In this case, there probably isn't a
+	   prologue.  */
+	return pc;
+    }
+
+/* We can't find the start of this function, so there's nothing we can do. */
+  return pc;
+}
+
+/* Function: pop_frame
+   This routine gets called when either the user uses the `return'
+   command, or the call dummy breakpoint gets hit.  */
+
+void
+v850_pop_frame (frame)
+     struct frame_info *frame;
+{
+  int regnum;
+
+  if (PC_IN_CALL_DUMMY(frame->pc, frame->frame, frame->frame))
+    generic_pop_dummy_frame ();
+  else
+    {
+      write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
+
+      for (regnum = 0; regnum < NUM_REGS; regnum++)
+	if (frame->fsr.regs[regnum] != 0)
+	  write_register (regnum,
+			  read_memory_unsigned_integer (frame->fsr.regs[regnum],
+							REGISTER_RAW_SIZE(regnum)));
+
+      write_register (SP_REGNUM, FRAME_FP (frame));
+    }
+
+  flush_cached_frames ();
+}
+
+/* Function: push_arguments
+   Setup arguments and RP for a call to the target.  First four args
+   go in R6->R9, subsequent args go into sp + 16 -> sp + ...  Structs
+   are passed by reference.  64 bit quantities (doubles and long
+   longs) may be split between the regs and the stack.  When calling a
+   function that returns a struct, a pointer to the struct is passed
+   in as a secret first argument (always in R6).
+
+   Stack space for the args has NOT been allocated: that job is up to us.
+   */
+
+CORE_ADDR
+v850_push_arguments (nargs, args, sp, struct_return, struct_addr)
+     int nargs;
+     value_ptr *args;
+     CORE_ADDR sp;
+     unsigned char struct_return;
+     CORE_ADDR struct_addr;
+{
+  int argreg;
+  int argnum;
+  int len = 0;
+  int stack_offset;
+
+  /* First, just for safety, make sure stack is aligned */
+  sp &= ~3;
+
+  /* Now make space on the stack for the args. */
+  for (argnum = 0; argnum < nargs; argnum++)
+    len += ((TYPE_LENGTH(VALUE_TYPE(args[argnum])) + 3) & ~3);
+  sp -= len;	/* possibly over-allocating, but it works... */
+		/* (you might think we could allocate 16 bytes */
+		/* less, but the ABI seems to use it all! )  */
+  argreg = ARG0_REGNUM;
+
+  /* the struct_return pointer occupies the first parameter-passing reg */
+  if (struct_return)
+      write_register (argreg++, struct_addr);
+
+  stack_offset = 16;
+  /* The offset onto the stack at which we will start copying parameters
+     (after the registers are used up) begins at 16 rather than at zero.
+     I don't really know why, that's just the way it seems to work.  */
+
+  /* Now load as many as possible of the first arguments into
+     registers, and push the rest onto the stack.  There are 16 bytes
+     in four registers available.  Loop thru args from first to last.  */
+  for (argnum = 0; argnum < nargs; argnum++)
+    {
+      int len;
+      char *val;
+      char valbuf[REGISTER_RAW_SIZE(ARG0_REGNUM)];
+
+      if (TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_STRUCT
+	  && TYPE_LENGTH (VALUE_TYPE (*args)) > 8)
+	{
+	  store_address (valbuf, 4, VALUE_ADDRESS (*args));
+	  len = 4;
+	  val = valbuf;
+	}
+      else
+	{
+	  len = TYPE_LENGTH (VALUE_TYPE (*args));
+	  val = (char *)VALUE_CONTENTS (*args);
+	}
+
+      while (len > 0)
+	if  (argreg <= ARGLAST_REGNUM)
+	  {
+	    CORE_ADDR regval;
+
+	    regval = extract_address (val, REGISTER_RAW_SIZE (argreg));
+	    write_register (argreg, regval);
+
+	    len -= REGISTER_RAW_SIZE (argreg);
+	    val += REGISTER_RAW_SIZE (argreg);
+	    argreg++;
+	  }
+	else
+	  {
+	    write_memory (sp + stack_offset, val, 4);
+
+	    len -= 4;
+	    val += 4;
+	    stack_offset += 4;
+	  }
+      args++;
+    }
+  return sp;
+}
+
+/* Function: push_return_address (pc)
+   Set up the return address for the inferior function call.
+   Needed for targets where we don't actually execute a JSR/BSR instruction */
+ 
+CORE_ADDR
+v850_push_return_address (pc, sp)
+     CORE_ADDR pc;
+     CORE_ADDR sp;
+{
+  write_register (RP_REGNUM, CALL_DUMMY_ADDRESS ());
+  return sp;
+}
+ 
+/* Function: frame_saved_pc 
+   Find the caller of this frame.  We do this by seeing if RP_REGNUM
+   is saved in the stack anywhere, otherwise we get it from the
+   registers.  If the inner frame is a dummy frame, return its PC
+   instead of RP, because that's where "caller" of the dummy-frame
+   will be found.  */
+
+CORE_ADDR
+v850_frame_saved_pc (fi)
+     struct frame_info *fi;
+{
+  if (PC_IN_CALL_DUMMY(fi->pc, fi->frame, fi->frame))
+    return generic_read_register_dummy(fi->pc, fi->frame, PC_REGNUM);
+  else
+    return v850_find_callers_reg (fi, RP_REGNUM);
+}
+
+void
+get_saved_register (raw_buffer, optimized, addrp, frame, regnum, lval)
+     char *raw_buffer;
+     int *optimized;
+     CORE_ADDR *addrp;
+     struct frame_info *frame;
+     int regnum;
+     enum lval_type *lval;
+{
+  generic_get_saved_register (raw_buffer, optimized, addrp, 
+			      frame, regnum, lval);
+}
+
+
+/* Function: fix_call_dummy
+   Pokes the callee function's address into the CALL_DUMMY assembly stub.
+   Assumes that the CALL_DUMMY looks like this:
+	jarl <offset24>, r31
+	trap
+   */
+
+int
+v850_fix_call_dummy (dummy, sp, fun, nargs, args, type, gcc_p)
+     char *dummy;
+     CORE_ADDR sp;
+     CORE_ADDR fun;
+     int nargs;
+     value_ptr *args;
+     struct type *type;
+     int gcc_p;
+{
+  long offset24;
+
+  offset24 = (long) fun - (long) entry_point_address ();
+  offset24 &= 0x3fffff;
+  offset24 |= 0xff800000;	/* jarl <offset24>, r31 */
+
+  store_unsigned_integer ((unsigned int *)&dummy[2], 2, offset24 & 0xffff);
+  store_unsigned_integer ((unsigned int *)&dummy[0], 2, offset24 >> 16);
+  return 0;
+}
+
+/* Change the register names based on the current machine type. */
+
+static int
+v850_target_architecture_hook (ap)
+     const bfd_arch_info_type *ap;
+{
+  int i, j;
+
+  if (ap->arch != bfd_arch_v850)
+    return 0;
+
+  for (i = 0; v850_processor_type_table[i].regnames != NULL; i++)
+    {
+      if (v850_processor_type_table[i].mach == ap->mach)
+	{
+	  v850_register_names = v850_processor_type_table[i].regnames;
+	  return 1;
+	}
+    }
+
+  fatal ("Architecture `%s' unreconized", ap->printable_name);
+}
+
+void
+_initialize_v850_tdep ()
+{
+  tm_print_insn = print_insn_v850;
+  target_architecture_hook = v850_target_architecture_hook;
+}
diff --git a/gdb/valarith.c b/gdb/valarith.c
new file mode 100644
index 0000000..0a3aa4d
--- /dev/null
+++ b/gdb/valarith.c
@@ -0,0 +1,1259 @@
+/* Perform arithmetic and other operations on values, for GDB.
+   Copyright 1986, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "value.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+#include "target.h"
+#include "language.h"
+#include "demangle.h"
+#include "gdb_string.h"
+
+/* Define whether or not the C operator '/' truncates towards zero for
+   differently signed operands (truncation direction is undefined in C). */
+
+#ifndef TRUNCATION_TOWARDS_ZERO
+#define TRUNCATION_TOWARDS_ZERO ((-5 / 2) == -2)
+#endif
+
+static value_ptr value_subscripted_rvalue PARAMS ((value_ptr, value_ptr, int));
+
+void _initialize_valarith PARAMS ((void));
+
+
+value_ptr
+value_add (arg1, arg2)
+     value_ptr arg1, arg2;
+{
+  register value_ptr valint, valptr;
+  register int len;
+  struct type *type1, *type2, *valptrtype;
+
+  COERCE_NUMBER (arg1);
+  COERCE_NUMBER (arg2);
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+
+  if ((TYPE_CODE (type1) == TYPE_CODE_PTR
+       || TYPE_CODE (type2) == TYPE_CODE_PTR)
+      &&
+      (TYPE_CODE (type1) == TYPE_CODE_INT
+       || TYPE_CODE (type2) == TYPE_CODE_INT))
+    /* Exactly one argument is a pointer, and one is an integer.  */
+    {
+      value_ptr retval;
+
+      if (TYPE_CODE (type1) == TYPE_CODE_PTR)
+	{
+	  valptr = arg1;
+	  valint = arg2;
+	  valptrtype = type1;
+	}
+      else
+	{
+	  valptr = arg2;
+	  valint = arg1;
+	  valptrtype = type2;
+	}
+      len = TYPE_LENGTH (check_typedef (TYPE_TARGET_TYPE (valptrtype)));
+      if (len == 0)
+	len = 1;		/* For (void *) */
+      retval = value_from_longest (valptrtype,
+				   value_as_long (valptr)
+				   + (len * value_as_long (valint)));
+      VALUE_BFD_SECTION (retval) = VALUE_BFD_SECTION (valptr);
+      return retval;
+    }
+
+  return value_binop (arg1, arg2, BINOP_ADD);
+}
+
+value_ptr
+value_sub (arg1, arg2)
+     value_ptr arg1, arg2;
+{
+  struct type *type1, *type2;
+  COERCE_NUMBER (arg1);
+  COERCE_NUMBER (arg2);
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+
+  if (TYPE_CODE (type1) == TYPE_CODE_PTR)
+    {
+      if (TYPE_CODE (type2) == TYPE_CODE_INT)
+	{
+	  /* pointer - integer.  */
+	  LONGEST sz = TYPE_LENGTH (check_typedef (TYPE_TARGET_TYPE (type1)));
+	  return value_from_longest
+	    (VALUE_TYPE (arg1),
+	     value_as_long (arg1) - (sz * value_as_long (arg2)));
+	}
+      else if (TYPE_CODE (type2) == TYPE_CODE_PTR
+	       && TYPE_LENGTH (TYPE_TARGET_TYPE (type1))
+		  == TYPE_LENGTH (TYPE_TARGET_TYPE (type2)))
+	{
+	  /* pointer to <type x> - pointer to <type x>.  */
+	  LONGEST sz = TYPE_LENGTH (check_typedef (TYPE_TARGET_TYPE (type1)));
+	  return value_from_longest
+	    (builtin_type_long,		/* FIXME -- should be ptrdiff_t */
+	     (value_as_long (arg1) - value_as_long (arg2)) / sz);
+	}
+      else
+	{
+	  error ("\
+First argument of `-' is a pointer and second argument is neither\n\
+an integer nor a pointer of the same type.");
+	}
+    }
+
+  return value_binop (arg1, arg2, BINOP_SUB);
+}
+
+/* Return the value of ARRAY[IDX].
+   See comments in value_coerce_array() for rationale for reason for
+   doing lower bounds adjustment here rather than there.
+   FIXME:  Perhaps we should validate that the index is valid and if
+   verbosity is set, warn about invalid indices (but still use them). */
+
+value_ptr
+value_subscript (array, idx)
+     value_ptr array, idx;
+{
+  value_ptr bound;
+  int c_style = current_language->c_style_arrays;
+  struct type *tarray;
+
+  COERCE_REF (array);
+  tarray = check_typedef (VALUE_TYPE (array));
+  COERCE_VARYING_ARRAY (array, tarray);
+
+  if (TYPE_CODE (tarray) == TYPE_CODE_ARRAY
+      || TYPE_CODE (tarray) == TYPE_CODE_STRING)
+    {
+      struct type *range_type = TYPE_INDEX_TYPE (tarray);
+      LONGEST lowerbound, upperbound;
+      get_discrete_bounds (range_type, &lowerbound, &upperbound);
+
+      if (VALUE_LVAL (array) != lval_memory)
+	return value_subscripted_rvalue (array, idx, lowerbound);
+
+      if (c_style == 0)
+	{
+	  LONGEST index = value_as_long (idx);
+	  if (index >= lowerbound && index <= upperbound)
+	    return value_subscripted_rvalue (array, idx, lowerbound);
+	  warning ("array or string index out of range");
+	  /* fall doing C stuff */
+	  c_style = 1;
+	}
+
+      if (lowerbound != 0)
+	{
+	  bound = value_from_longest (builtin_type_int, (LONGEST) lowerbound);
+	  idx = value_sub (idx, bound);
+	}
+
+      array = value_coerce_array (array);
+    }
+
+  if (TYPE_CODE (tarray) == TYPE_CODE_BITSTRING)
+    {
+      struct type *range_type = TYPE_INDEX_TYPE (tarray);
+      LONGEST index = value_as_long (idx);
+      value_ptr v;
+      int offset, byte, bit_index;
+      LONGEST lowerbound, upperbound;
+      get_discrete_bounds (range_type, &lowerbound, &upperbound);
+      if (index < lowerbound || index > upperbound)
+	error ("bitstring index out of range");
+      index -= lowerbound;
+      offset = index / TARGET_CHAR_BIT;
+      byte = *((char*)VALUE_CONTENTS (array) + offset);
+      bit_index = index % TARGET_CHAR_BIT;
+      byte >>= (BITS_BIG_ENDIAN ? TARGET_CHAR_BIT - 1 - bit_index : bit_index);
+      v = value_from_longest (LA_BOOL_TYPE, byte & 1);
+      VALUE_BITPOS (v) = bit_index;
+      VALUE_BITSIZE (v) = 1;
+      VALUE_LVAL (v) = VALUE_LVAL (array);
+      if (VALUE_LVAL (array) == lval_internalvar)
+	VALUE_LVAL (v) = lval_internalvar_component;
+      VALUE_ADDRESS (v) = VALUE_ADDRESS (array);
+      VALUE_OFFSET (v) = offset + VALUE_OFFSET (array);
+      return v;
+    }
+
+  if (c_style)
+    return value_ind (value_add (array, idx));
+  else
+    error ("not an array or string");
+}
+
+/* Return the value of EXPR[IDX], expr an aggregate rvalue
+   (eg, a vector register).  This routine used to promote floats
+   to doubles, but no longer does.  */
+
+static value_ptr
+value_subscripted_rvalue (array, idx, lowerbound)
+     value_ptr array, idx;
+     int lowerbound;
+{
+  struct type *array_type = check_typedef (VALUE_TYPE (array));
+  struct type *elt_type = check_typedef (TYPE_TARGET_TYPE (array_type));
+  unsigned int elt_size = TYPE_LENGTH (elt_type);
+  LONGEST index = value_as_long (idx);
+  unsigned int elt_offs = elt_size * longest_to_int (index - lowerbound);
+  value_ptr v;
+
+  if (index < lowerbound || elt_offs >= TYPE_LENGTH (array_type))
+    error ("no such vector element");
+
+  v = allocate_value (elt_type);
+  if (VALUE_LAZY (array))
+    VALUE_LAZY (v) = 1;
+  else
+    memcpy (VALUE_CONTENTS (v), VALUE_CONTENTS (array) + elt_offs, elt_size);
+
+  if (VALUE_LVAL (array) == lval_internalvar)
+    VALUE_LVAL (v) = lval_internalvar_component;
+  else
+    VALUE_LVAL (v) = VALUE_LVAL (array);
+  VALUE_ADDRESS (v) = VALUE_ADDRESS (array);
+  VALUE_OFFSET (v) = VALUE_OFFSET (array) + elt_offs;
+  return v;
+}
+
+/* Check to see if either argument is a structure.  This is called so
+   we know whether to go ahead with the normal binop or look for a 
+   user defined function instead.
+
+   For now, we do not overload the `=' operator.  */
+
+int
+binop_user_defined_p (op, arg1, arg2)
+     enum exp_opcode op;
+     value_ptr arg1, arg2;
+{
+  struct type *type1, *type2;
+  if (op == BINOP_ASSIGN || op == BINOP_CONCAT)
+    return 0;
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+  return (TYPE_CODE (type1) == TYPE_CODE_STRUCT
+	  || TYPE_CODE (type2) == TYPE_CODE_STRUCT
+	  || (TYPE_CODE (type1) == TYPE_CODE_REF
+	      && TYPE_CODE (TYPE_TARGET_TYPE (type1)) == TYPE_CODE_STRUCT)
+	  || (TYPE_CODE (type2) == TYPE_CODE_REF
+	      && TYPE_CODE (TYPE_TARGET_TYPE (type2)) == TYPE_CODE_STRUCT));
+}
+
+/* Check to see if argument is a structure.  This is called so
+   we know whether to go ahead with the normal unop or look for a 
+   user defined function instead.
+
+   For now, we do not overload the `&' operator.  */
+
+int unop_user_defined_p (op, arg1)
+     enum exp_opcode op;
+     value_ptr arg1;
+{
+  struct type *type1;
+  if (op == UNOP_ADDR)
+    return 0;
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  for (;;)
+    {
+      if (TYPE_CODE (type1) == TYPE_CODE_STRUCT)
+	return 1;
+      else if (TYPE_CODE (type1) == TYPE_CODE_REF)
+	type1 = TYPE_TARGET_TYPE (type1);
+      else
+	return 0;
+    }
+}
+
+/* We know either arg1 or arg2 is a structure, so try to find the right
+   user defined function.  Create an argument vector that calls 
+   arg1.operator @ (arg1,arg2) and return that value (where '@' is any
+   binary operator which is legal for GNU C++).
+
+   OP is the operatore, and if it is BINOP_ASSIGN_MODIFY, then OTHEROP
+   is the opcode saying how to modify it.  Otherwise, OTHEROP is
+   unused.  */
+
+value_ptr
+value_x_binop (arg1, arg2, op, otherop, noside)
+     value_ptr arg1, arg2;
+     enum exp_opcode op, otherop;
+     enum noside noside;
+{
+  value_ptr * argvec;
+  char *ptr;
+  char tstr[13];
+  int static_memfuncp;
+
+  COERCE_REF (arg1);
+  COERCE_REF (arg2);
+  COERCE_ENUM (arg1);
+  COERCE_ENUM (arg2);
+
+  /* now we know that what we have to do is construct our
+     arg vector and find the right function to call it with.  */
+
+  if (TYPE_CODE (check_typedef (VALUE_TYPE (arg1))) != TYPE_CODE_STRUCT)
+    error ("Can't do that binary op on that type");  /* FIXME be explicit */
+
+  argvec = (value_ptr *) alloca (sizeof (value_ptr) * 4);
+  argvec[1] = value_addr (arg1);
+  argvec[2] = arg2;
+  argvec[3] = 0;
+
+  /* make the right function name up */  
+  strcpy(tstr, "operator__");
+  ptr = tstr+8;
+  switch (op)
+    {
+    case BINOP_ADD:		strcpy(ptr,"+"); break;
+    case BINOP_SUB:		strcpy(ptr,"-"); break;
+    case BINOP_MUL:		strcpy(ptr,"*"); break;
+    case BINOP_DIV:		strcpy(ptr,"/"); break;
+    case BINOP_REM:		strcpy(ptr,"%"); break;
+    case BINOP_LSH:		strcpy(ptr,"<<"); break;
+    case BINOP_RSH:		strcpy(ptr,">>"); break;
+    case BINOP_BITWISE_AND:	strcpy(ptr,"&"); break;
+    case BINOP_BITWISE_IOR:	strcpy(ptr,"|"); break;
+    case BINOP_BITWISE_XOR:	strcpy(ptr,"^"); break;
+    case BINOP_LOGICAL_AND:	strcpy(ptr,"&&"); break;
+    case BINOP_LOGICAL_OR:	strcpy(ptr,"||"); break;
+    case BINOP_MIN:		strcpy(ptr,"<?"); break;
+    case BINOP_MAX:		strcpy(ptr,">?"); break;
+    case BINOP_ASSIGN:		strcpy(ptr,"="); break;
+    case BINOP_ASSIGN_MODIFY:	
+      switch (otherop)
+	{
+	case BINOP_ADD:		strcpy(ptr,"+="); break;
+	case BINOP_SUB:		strcpy(ptr,"-="); break;
+	case BINOP_MUL:		strcpy(ptr,"*="); break;
+	case BINOP_DIV:		strcpy(ptr,"/="); break;
+	case BINOP_REM:		strcpy(ptr,"%="); break;
+	case BINOP_BITWISE_AND:	strcpy(ptr,"&="); break;
+	case BINOP_BITWISE_IOR:	strcpy(ptr,"|="); break;
+	case BINOP_BITWISE_XOR:	strcpy(ptr,"^="); break;
+	case BINOP_MOD:		/* invalid */
+	default:
+	  error ("Invalid binary operation specified.");
+	}
+      break;
+    case BINOP_SUBSCRIPT: strcpy(ptr,"[]"); break;
+    case BINOP_EQUAL:	  strcpy(ptr,"=="); break;
+    case BINOP_NOTEQUAL:  strcpy(ptr,"!="); break;
+    case BINOP_LESS:      strcpy(ptr,"<"); break;
+    case BINOP_GTR:       strcpy(ptr,">"); break;
+    case BINOP_GEQ:       strcpy(ptr,">="); break;
+    case BINOP_LEQ:       strcpy(ptr,"<="); break;
+    case BINOP_MOD:	  /* invalid */
+    default:
+      error ("Invalid binary operation specified.");
+    }
+
+  argvec[0] = value_struct_elt (&arg1, argvec+1, tstr, &static_memfuncp, "structure");
+  
+  if (argvec[0])
+    {
+      if (static_memfuncp)
+	{
+	  argvec[1] = argvec[0];
+	  argvec++;
+	}
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  struct type *return_type;
+	  return_type
+	    = TYPE_TARGET_TYPE (check_typedef (VALUE_TYPE (argvec[0])));
+	  return value_zero (return_type, VALUE_LVAL (arg1));
+	}
+      return call_function_by_hand (argvec[0], 2 - static_memfuncp, argvec + 1);
+    }
+  error ("member function %s not found", tstr);
+#ifdef lint
+  return call_function_by_hand (argvec[0], 2 - static_memfuncp, argvec + 1);
+#endif
+}
+
+/* We know that arg1 is a structure, so try to find a unary user
+   defined operator that matches the operator in question.  
+   Create an argument vector that calls arg1.operator @ (arg1)
+   and return that value (where '@' is (almost) any unary operator which
+   is legal for GNU C++).  */
+
+value_ptr
+value_x_unop (arg1, op, noside)
+     value_ptr arg1;
+     enum exp_opcode op;
+     enum noside noside;
+{
+  value_ptr * argvec;
+  char *ptr, *mangle_ptr;
+  char tstr[13], mangle_tstr[13];
+  int static_memfuncp;
+
+  COERCE_REF (arg1);
+  COERCE_ENUM (arg1);
+
+  /* now we know that what we have to do is construct our
+     arg vector and find the right function to call it with.  */
+
+  if (TYPE_CODE (check_typedef (VALUE_TYPE (arg1))) != TYPE_CODE_STRUCT)
+    error ("Can't do that unary op on that type");  /* FIXME be explicit */
+
+  argvec = (value_ptr *) alloca (sizeof (value_ptr) * 3);
+  argvec[1] = value_addr (arg1);
+  argvec[2] = 0;
+
+  /* make the right function name up */  
+  strcpy(tstr,"operator__");
+  ptr = tstr+8;
+  strcpy(mangle_tstr, "__");
+  mangle_ptr = mangle_tstr+2;
+  switch (op)
+    {
+    case UNOP_PREINCREMENT:	strcpy(ptr,"++"); break;
+    case UNOP_PREDECREMENT:	strcpy(ptr,"++"); break;
+    case UNOP_POSTINCREMENT:	strcpy(ptr,"++"); break;
+    case UNOP_POSTDECREMENT:	strcpy(ptr,"++"); break;
+    case UNOP_LOGICAL_NOT:	strcpy(ptr,"!"); break;
+    case UNOP_COMPLEMENT:	strcpy(ptr,"~"); break;
+    case UNOP_NEG:		strcpy(ptr,"-"); break;
+    case UNOP_IND:		strcpy(ptr,"*"); break;
+    default:
+      error ("Invalid unary operation specified.");
+    }
+
+  argvec[0] = value_struct_elt (&arg1, argvec+1, tstr, &static_memfuncp, "structure");
+
+  if (argvec[0])
+    {
+      if (static_memfuncp)
+	{
+	  argvec[1] = argvec[0];
+	  argvec++;
+	}
+      if (noside == EVAL_AVOID_SIDE_EFFECTS)
+	{
+	  struct type *return_type;
+	  return_type
+	    = TYPE_TARGET_TYPE (check_typedef (VALUE_TYPE (argvec[0])));
+	  return value_zero (return_type, VALUE_LVAL (arg1));
+	}
+      return call_function_by_hand (argvec[0], 1 - static_memfuncp, argvec + 1);
+    }
+  error ("member function %s not found", tstr);
+  return 0;  /* For lint -- never reached */
+}
+
+
+/* Concatenate two values with the following conditions:
+
+   (1)	Both values must be either bitstring values or character string
+	values and the resulting value consists of the concatenation of
+	ARG1 followed by ARG2.
+
+	or
+
+	One value must be an integer value and the other value must be
+	either a bitstring value or character string value, which is
+	to be repeated by the number of times specified by the integer
+	value.
+
+
+    (2)	Boolean values are also allowed and are treated as bit string
+    	values of length 1.
+
+    (3)	Character values are also allowed and are treated as character
+    	string values of length 1.
+*/
+
+value_ptr
+value_concat (arg1, arg2)
+     value_ptr arg1, arg2;
+{
+  register value_ptr inval1, inval2, outval;
+  int inval1len, inval2len;
+  int count, idx;
+  char *ptr;
+  char inchar;
+  struct type *type1 = check_typedef (VALUE_TYPE (arg1));
+  struct type *type2 = check_typedef (VALUE_TYPE (arg2));
+
+  COERCE_VARYING_ARRAY (arg1, type1);
+  COERCE_VARYING_ARRAY (arg2, type2);
+
+  /* First figure out if we are dealing with two values to be concatenated
+     or a repeat count and a value to be repeated.  INVAL1 is set to the
+     first of two concatenated values, or the repeat count.  INVAL2 is set
+     to the second of the two concatenated values or the value to be 
+     repeated. */
+
+  if (TYPE_CODE (type2) == TYPE_CODE_INT)
+    {
+      struct type *tmp = type1;
+      type1 = tmp;
+      tmp = type2;
+      inval1 = arg2;
+      inval2 = arg1;
+    }
+  else
+    {
+      inval1 = arg1;
+      inval2 = arg2;
+    }
+
+  /* Now process the input values. */
+
+  if (TYPE_CODE (type1) == TYPE_CODE_INT)
+    {
+      /* We have a repeat count.  Validate the second value and then
+	 construct a value repeated that many times. */
+      if (TYPE_CODE (type2) == TYPE_CODE_STRING
+	  || TYPE_CODE (type2) == TYPE_CODE_CHAR)
+	{
+	  count = longest_to_int (value_as_long (inval1));
+	  inval2len = TYPE_LENGTH (type2);
+	  ptr = (char *) alloca (count * inval2len);
+	  if (TYPE_CODE (type2) == TYPE_CODE_CHAR)
+	    {
+	      inchar = (char) unpack_long (type2,
+					   VALUE_CONTENTS (inval2));
+	      for (idx = 0; idx < count; idx++)
+		{
+		  *(ptr + idx) = inchar;
+		}
+	    }
+	  else
+	    {
+	      for (idx = 0; idx < count; idx++)
+		{
+		  memcpy (ptr + (idx * inval2len), VALUE_CONTENTS (inval2),
+			  inval2len);
+		}
+	    }
+	  outval = value_string (ptr, count * inval2len);
+	}
+      else if (TYPE_CODE (type2) == TYPE_CODE_BITSTRING
+	       || TYPE_CODE (type2) == TYPE_CODE_BOOL)
+	{
+	  error ("unimplemented support for bitstring/boolean repeats");
+	}
+      else
+	{
+	  error ("can't repeat values of that type");
+	}
+    }
+  else if (TYPE_CODE (type1) == TYPE_CODE_STRING
+      || TYPE_CODE (type1) == TYPE_CODE_CHAR)
+    {
+      /* We have two character strings to concatenate. */
+      if (TYPE_CODE (type2) != TYPE_CODE_STRING
+	  && TYPE_CODE (type2) != TYPE_CODE_CHAR)
+	{
+	  error ("Strings can only be concatenated with other strings.");
+	}
+      inval1len = TYPE_LENGTH (type1);
+      inval2len = TYPE_LENGTH (type2);
+      ptr = (char *) alloca (inval1len + inval2len);
+      if (TYPE_CODE (type1) == TYPE_CODE_CHAR)
+	{
+	  *ptr = (char) unpack_long (type1, VALUE_CONTENTS (inval1));
+	}
+      else
+	{
+	  memcpy (ptr, VALUE_CONTENTS (inval1), inval1len);
+	}
+      if (TYPE_CODE (type2) == TYPE_CODE_CHAR)
+	{
+	  *(ptr + inval1len) = 
+	    (char) unpack_long (type2, VALUE_CONTENTS (inval2));
+	}
+      else
+	{
+	  memcpy (ptr + inval1len, VALUE_CONTENTS (inval2), inval2len);
+	}
+      outval = value_string (ptr, inval1len + inval2len);
+    }
+  else if (TYPE_CODE (type1) == TYPE_CODE_BITSTRING
+	   || TYPE_CODE (type1) == TYPE_CODE_BOOL)
+    {
+      /* We have two bitstrings to concatenate. */
+      if (TYPE_CODE (type2) != TYPE_CODE_BITSTRING
+	  && TYPE_CODE (type2) != TYPE_CODE_BOOL)
+	{
+	  error ("Bitstrings or booleans can only be concatenated with other bitstrings or booleans.");
+	}
+      error ("unimplemented support for bitstring/boolean concatenation.");
+    }      
+  else
+    {
+      /* We don't know how to concatenate these operands. */
+      error ("illegal operands for concatenation.");
+    }
+  return (outval);
+}
+
+
+
+/* Perform a binary operation on two operands which have reasonable
+   representations as integers or floats.  This includes booleans,
+   characters, integers, or floats.
+   Does not support addition and subtraction on pointers;
+   use value_add or value_sub if you want to handle those possibilities.  */
+
+value_ptr
+value_binop (arg1, arg2, op)
+     value_ptr arg1, arg2;
+     enum exp_opcode op;
+{
+  register value_ptr val;
+  struct type *type1, *type2;
+
+  COERCE_REF (arg1);
+  COERCE_REF (arg2);
+  COERCE_ENUM (arg1);
+  COERCE_ENUM (arg2);
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+
+  if ((TYPE_CODE (type1) != TYPE_CODE_FLT
+       && TYPE_CODE (type1) != TYPE_CODE_CHAR
+       && TYPE_CODE (type1) != TYPE_CODE_INT
+       && TYPE_CODE (type1) != TYPE_CODE_BOOL
+       && TYPE_CODE (type1) != TYPE_CODE_RANGE)
+      ||
+      (TYPE_CODE (type2) != TYPE_CODE_FLT
+       && TYPE_CODE (type2) != TYPE_CODE_CHAR
+       && TYPE_CODE (type2) != TYPE_CODE_INT
+       && TYPE_CODE (type2) != TYPE_CODE_BOOL
+       && TYPE_CODE (type2) != TYPE_CODE_RANGE))
+    error ("Argument to arithmetic operation not a number or boolean.");
+
+  if (TYPE_CODE (type1) == TYPE_CODE_FLT
+      ||
+      TYPE_CODE (type2) == TYPE_CODE_FLT)
+    {
+      /* FIXME-if-picky-about-floating-accuracy: Should be doing this
+	 in target format.  real.c in GCC probably has the necessary
+	 code.  */
+      DOUBLEST v1, v2, v;
+      v1 = value_as_double (arg1);
+      v2 = value_as_double (arg2);
+      switch (op)
+	{
+	case BINOP_ADD:
+	  v = v1 + v2;
+	  break;
+
+	case BINOP_SUB:
+	  v = v1 - v2;
+	  break;
+
+	case BINOP_MUL:
+	  v = v1 * v2;
+	  break;
+
+	case BINOP_DIV:
+	  v = v1 / v2;
+	  break;
+
+	default:
+	  error ("Integer-only operation on floating point number.");
+	}
+
+      /* If either arg was long double, make sure that value is also long
+	 double.  */
+
+      if (TYPE_LENGTH(type1) * 8 > TARGET_DOUBLE_BIT
+	  || TYPE_LENGTH(type2) * 8 > TARGET_DOUBLE_BIT)
+	val = allocate_value (builtin_type_long_double);
+      else
+	val = allocate_value (builtin_type_double);
+
+      store_floating (VALUE_CONTENTS_RAW (val), TYPE_LENGTH (VALUE_TYPE (val)),
+		      v);
+    }
+  else if (TYPE_CODE (type1) == TYPE_CODE_BOOL
+	   &&
+	   TYPE_CODE (type2) == TYPE_CODE_BOOL)
+      {
+	  LONGEST v1, v2, v;
+	  v1 = value_as_long (arg1);
+	  v2 = value_as_long (arg2);
+	  
+	  switch (op)
+	    {
+	    case BINOP_BITWISE_AND:
+	      v = v1 & v2;
+	      break;
+	      
+	    case BINOP_BITWISE_IOR:
+	      v = v1 | v2;
+	      break;
+	      
+	    case BINOP_BITWISE_XOR:
+	      v = v1 ^ v2;
+	      break;
+	      
+	    default:
+	      error ("Invalid operation on booleans.");
+	    }
+	  
+	  val = allocate_value (type1);
+	  store_signed_integer (VALUE_CONTENTS_RAW (val),
+				TYPE_LENGTH (type1),
+				v);
+      }
+  else
+    /* Integral operations here.  */
+    /* FIXME:  Also mixed integral/booleans, with result an integer. */
+    /* FIXME: This implements ANSI C rules (also correct for C++).
+       What about FORTRAN and chill?  */
+    {
+      unsigned int promoted_len1 = TYPE_LENGTH (type1);
+      unsigned int promoted_len2 = TYPE_LENGTH (type2);
+      int is_unsigned1 = TYPE_UNSIGNED (type1);
+      int is_unsigned2 = TYPE_UNSIGNED (type2);
+      unsigned int result_len;
+      int unsigned_operation;
+
+      /* Determine type length and signedness after promotion for
+	 both operands.  */
+      if (promoted_len1 < TYPE_LENGTH (builtin_type_int))
+	{
+	  is_unsigned1 = 0;
+	  promoted_len1 = TYPE_LENGTH (builtin_type_int);
+	}
+      if (promoted_len2 < TYPE_LENGTH (builtin_type_int))
+	{
+	  is_unsigned2 = 0;
+	  promoted_len2 = TYPE_LENGTH (builtin_type_int);
+	}
+
+      /* Determine type length of the result, and if the operation should
+	 be done unsigned.
+	 Use the signedness of the operand with the greater length.
+	 If both operands are of equal length, use unsigned operation
+	 if one of the operands is unsigned.  */
+      if (promoted_len1 > promoted_len2)
+	{
+	  unsigned_operation = is_unsigned1;
+	  result_len = promoted_len1;
+	}
+      else if (promoted_len2 > promoted_len1)
+	{
+	  unsigned_operation = is_unsigned2;
+	  result_len = promoted_len2;
+	}
+      else
+	{
+	  unsigned_operation = is_unsigned1 || is_unsigned2;
+	  result_len = promoted_len1;
+	}
+
+      if (unsigned_operation)
+	{
+	  ULONGEST v1, v2, v;
+	  v1 = (ULONGEST) value_as_long (arg1);
+	  v2 = (ULONGEST) value_as_long (arg2);
+
+	  /* Truncate values to the type length of the result.  */
+	  if (result_len < sizeof (ULONGEST))
+	    {
+	      v1 &= ((LONGEST) 1 << HOST_CHAR_BIT * result_len) - 1;
+	      v2 &= ((LONGEST) 1 << HOST_CHAR_BIT * result_len) - 1;
+	    }
+	  
+	  switch (op)
+	    {
+	    case BINOP_ADD:
+	      v = v1 + v2;
+	      break;
+	      
+	    case BINOP_SUB:
+	      v = v1 - v2;
+	      break;
+	      
+	    case BINOP_MUL:
+	      v = v1 * v2;
+	      break;
+	      
+	    case BINOP_DIV:
+	      v = v1 / v2;
+	      break;
+	      
+	    case BINOP_REM:
+	      v = v1 % v2;
+	      break;
+	      
+	    case BINOP_MOD:
+	      /* Knuth 1.2.4, integer only.  Note that unlike the C '%' op,
+	         v1 mod 0 has a defined value, v1. */
+	      /* Chill specifies that v2 must be > 0, so check for that. */
+	      if (current_language -> la_language == language_chill
+		  && value_as_long (arg2) <= 0)
+		{
+		  error ("Second operand of MOD must be greater than zero.");
+		}
+	      if (v2 == 0)
+		{
+		  v = v1;
+		}
+	      else
+		{
+		  v = v1/v2;
+		  /* Note floor(v1/v2) == v1/v2 for unsigned. */
+		  v = v1 - (v2 * v);
+		}
+	      break;
+	      
+	    case BINOP_LSH:
+	      v = v1 << v2;
+	      break;
+	      
+	    case BINOP_RSH:
+	      v = v1 >> v2;
+	      break;
+	      
+	    case BINOP_BITWISE_AND:
+	      v = v1 & v2;
+	      break;
+	      
+	    case BINOP_BITWISE_IOR:
+	      v = v1 | v2;
+	      break;
+	      
+	    case BINOP_BITWISE_XOR:
+	      v = v1 ^ v2;
+	      break;
+	      
+	    case BINOP_LOGICAL_AND:
+	      v = v1 && v2;
+	      break;
+	      
+	    case BINOP_LOGICAL_OR:
+	      v = v1 || v2;
+	      break;
+	      
+	    case BINOP_MIN:
+	      v = v1 < v2 ? v1 : v2;
+	      break;
+	      
+	    case BINOP_MAX:
+	      v = v1 > v2 ? v1 : v2;
+	      break;
+
+	    case BINOP_EQUAL:
+	      v = v1 == v2;
+	      break;
+
+	    case BINOP_LESS:
+	      v = v1 < v2;
+	      break;
+	      
+	    default:
+	      error ("Invalid binary operation on numbers.");
+	    }
+
+	  /* This is a kludge to get around the fact that we don't
+	     know how to determine the result type from the types of
+	     the operands.  (I'm not really sure how much we feel the
+	     need to duplicate the exact rules of the current
+	     language.  They can get really hairy.  But not to do so
+	     makes it hard to document just what we *do* do).  */
+
+	  /* Can't just call init_type because we wouldn't know what
+	     name to give the type.  */
+	  val = allocate_value
+	    (result_len > TARGET_LONG_BIT / HOST_CHAR_BIT
+	     ? builtin_type_unsigned_long_long
+	     : builtin_type_unsigned_long);
+	  store_unsigned_integer (VALUE_CONTENTS_RAW (val),
+				  TYPE_LENGTH (VALUE_TYPE (val)),
+				  v);
+	}
+      else
+	{
+	  LONGEST v1, v2, v;
+	  v1 = value_as_long (arg1);
+	  v2 = value_as_long (arg2);
+	  
+	  switch (op)
+	    {
+	    case BINOP_ADD:
+	      v = v1 + v2;
+	      break;
+	      
+	    case BINOP_SUB:
+	      v = v1 - v2;
+	      break;
+	      
+	    case BINOP_MUL:
+	      v = v1 * v2;
+	      break;
+	      
+	    case BINOP_DIV:
+	      v = v1 / v2;
+	      break;
+	      
+	    case BINOP_REM:
+	      v = v1 % v2;
+	      break;
+	      
+	    case BINOP_MOD:
+	      /* Knuth 1.2.4, integer only.  Note that unlike the C '%' op,
+	         X mod 0 has a defined value, X. */
+	      /* Chill specifies that v2 must be > 0, so check for that. */
+	      if (current_language -> la_language == language_chill
+		  && v2 <= 0)
+		{
+		  error ("Second operand of MOD must be greater than zero.");
+		}
+	      if (v2 == 0)
+		{
+		  v = v1;
+		}
+	      else
+		{
+		  v = v1/v2;
+		  /* Compute floor. */
+		  if (TRUNCATION_TOWARDS_ZERO && (v < 0) && ((v1 % v2) != 0))
+		    {
+		      v--;
+		    }
+		  v = v1 - (v2 * v);
+		}
+	      break;
+	      
+	    case BINOP_LSH:
+	      v = v1 << v2;
+	      break;
+	      
+	    case BINOP_RSH:
+	      v = v1 >> v2;
+	      break;
+	      
+	    case BINOP_BITWISE_AND:
+	      v = v1 & v2;
+	      break;
+	      
+	    case BINOP_BITWISE_IOR:
+	      v = v1 | v2;
+	      break;
+	      
+	    case BINOP_BITWISE_XOR:
+	      v = v1 ^ v2;
+	      break;
+	      
+	    case BINOP_LOGICAL_AND:
+	      v = v1 && v2;
+	      break;
+	      
+	    case BINOP_LOGICAL_OR:
+	      v = v1 || v2;
+	      break;
+	      
+	    case BINOP_MIN:
+	      v = v1 < v2 ? v1 : v2;
+	      break;
+	      
+	    case BINOP_MAX:
+	      v = v1 > v2 ? v1 : v2;
+	      break;
+
+	    case BINOP_EQUAL:
+	      v = v1 == v2;
+	      break;
+
+	    case BINOP_LESS:
+	      v = v1 < v2;
+	      break;
+	      
+	    default:
+	      error ("Invalid binary operation on numbers.");
+	    }
+
+	  /* This is a kludge to get around the fact that we don't
+	     know how to determine the result type from the types of
+	     the operands.  (I'm not really sure how much we feel the
+	     need to duplicate the exact rules of the current
+	     language.  They can get really hairy.  But not to do so
+	     makes it hard to document just what we *do* do).  */
+
+	  /* Can't just call init_type because we wouldn't know what
+	     name to give the type.  */
+	  val = allocate_value
+	    (result_len > TARGET_LONG_BIT / HOST_CHAR_BIT
+	     ? builtin_type_long_long
+	     : builtin_type_long);
+	  store_signed_integer (VALUE_CONTENTS_RAW (val),
+				TYPE_LENGTH (VALUE_TYPE (val)),
+				v);
+	}
+    }
+
+  return val;
+}
+
+/* Simulate the C operator ! -- return 1 if ARG1 contains zero.  */
+
+int
+value_logical_not (arg1)
+     value_ptr arg1;
+{
+  register int len;
+  register char *p;
+  struct type *type1;
+
+  COERCE_NUMBER (arg1);
+  type1 = check_typedef (VALUE_TYPE (arg1));
+
+  if (TYPE_CODE (type1) == TYPE_CODE_FLT)
+    return 0 == value_as_double (arg1);
+
+  len = TYPE_LENGTH (type1);
+  p = VALUE_CONTENTS (arg1);
+
+  while (--len >= 0)
+    {
+      if (*p++)
+	break;
+    }
+
+  return len < 0;
+}
+
+/* Simulate the C operator == by returning a 1
+   iff ARG1 and ARG2 have equal contents.  */
+
+int
+value_equal (arg1, arg2)
+     register value_ptr arg1, arg2;
+
+{
+  register int len;
+  register char *p1, *p2;
+  struct type *type1, *type2;
+  enum type_code code1;
+  enum type_code code2;
+
+  COERCE_NUMBER (arg1);
+  COERCE_NUMBER (arg2);
+
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+  code1 = TYPE_CODE (type1);
+  code2 = TYPE_CODE (type2);
+
+  if ((code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL) &&
+      (code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return longest_to_int (value_as_long (value_binop (arg1, arg2,
+						       BINOP_EQUAL)));
+  else if ((code1 == TYPE_CODE_FLT || code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL)
+	   && (code2 == TYPE_CODE_FLT || code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return value_as_double (arg1) == value_as_double (arg2);
+
+  /* FIXME: Need to promote to either CORE_ADDR or LONGEST, whichever
+     is bigger.  */
+  else if (code1 == TYPE_CODE_PTR && (code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return value_as_pointer (arg1) == (CORE_ADDR) value_as_long (arg2);
+  else if (code2 == TYPE_CODE_PTR && (code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL))
+    return (CORE_ADDR) value_as_long (arg1) == value_as_pointer (arg2);
+
+  else if (code1 == code2
+	   && ((len = (int) TYPE_LENGTH (type1))
+	       == (int) TYPE_LENGTH (type2)))
+    {
+      p1 = VALUE_CONTENTS (arg1);
+      p2 = VALUE_CONTENTS (arg2);
+      while (--len >= 0)
+	{
+	  if (*p1++ != *p2++)
+	    break;
+	}
+      return len < 0;
+    }
+  else
+    {
+      error ("Invalid type combination in equality test.");
+      return 0;  /* For lint -- never reached */
+    }
+}
+
+/* Simulate the C operator < by returning 1
+   iff ARG1's contents are less than ARG2's.  */
+
+int
+value_less (arg1, arg2)
+     register value_ptr arg1, arg2;
+{
+  register enum type_code code1;
+  register enum type_code code2;
+  struct type *type1, *type2;
+
+  COERCE_NUMBER (arg1);
+  COERCE_NUMBER (arg2);
+
+  type1 = check_typedef (VALUE_TYPE (arg1));
+  type2 = check_typedef (VALUE_TYPE (arg2));
+  code1 = TYPE_CODE (type1);
+  code2 = TYPE_CODE (type2);
+
+  if ((code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL) &&
+      (code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return longest_to_int (value_as_long (value_binop (arg1, arg2,
+						       BINOP_LESS)));
+  else if ((code1 == TYPE_CODE_FLT || code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL)
+	   && (code2 == TYPE_CODE_FLT || code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return value_as_double (arg1) < value_as_double (arg2);
+  else if (code1 == TYPE_CODE_PTR && code2 == TYPE_CODE_PTR)
+    return value_as_pointer (arg1) < value_as_pointer (arg2);
+
+  /* FIXME: Need to promote to either CORE_ADDR or LONGEST, whichever
+     is bigger.  */
+  else if (code1 == TYPE_CODE_PTR && (code2 == TYPE_CODE_INT || code2 == TYPE_CODE_BOOL))
+    return value_as_pointer (arg1) < (CORE_ADDR) value_as_long (arg2);
+  else if (code2 == TYPE_CODE_PTR && (code1 == TYPE_CODE_INT || code1 == TYPE_CODE_BOOL))
+    return (CORE_ADDR) value_as_long (arg1) < value_as_pointer (arg2);
+
+  else
+    {
+      error ("Invalid type combination in ordering comparison.");
+      return 0;
+    }
+}
+
+/* The unary operators - and ~.  Both free the argument ARG1.  */
+
+value_ptr
+value_neg (arg1)
+     register value_ptr arg1;
+{
+  register struct type *type;
+  register struct type *result_type = VALUE_TYPE (arg1);
+
+  COERCE_REF (arg1);
+  COERCE_ENUM (arg1);
+
+  type = check_typedef (VALUE_TYPE (arg1));
+
+  if (TYPE_CODE (type) == TYPE_CODE_FLT)
+    return value_from_double (result_type, - value_as_double (arg1));
+  else if (TYPE_CODE (type) == TYPE_CODE_INT || TYPE_CODE (type) == TYPE_CODE_BOOL)
+    {
+      /* Perform integral promotion for ANSI C/C++.
+	 FIXME: What about FORTRAN and chill ?  */
+      if (TYPE_LENGTH (type) < TYPE_LENGTH (builtin_type_int))
+	result_type = builtin_type_int;
+
+      return value_from_longest (result_type, - value_as_long (arg1));
+    }
+  else {
+    error ("Argument to negate operation not a number.");
+    return 0;  /* For lint -- never reached */
+  }
+}
+
+value_ptr
+value_complement (arg1)
+     register value_ptr arg1;
+{
+  register struct type *type;
+  register struct type *result_type = VALUE_TYPE (arg1);
+  int typecode; 
+
+  COERCE_REF (arg1);
+  COERCE_ENUM (arg1);
+
+  type = check_typedef (VALUE_TYPE (arg1));
+
+  typecode = TYPE_CODE (type);
+  if ((typecode != TYPE_CODE_INT) && (typecode != TYPE_CODE_BOOL))
+    error ("Argument to complement operation not an integer or boolean.");
+
+  /* Perform integral promotion for ANSI C/C++.
+     FIXME: What about FORTRAN ?  */
+  if (TYPE_LENGTH (type) < TYPE_LENGTH (builtin_type_int))
+    result_type = builtin_type_int;
+
+  return value_from_longest (result_type, ~ value_as_long (arg1));
+}
+
+/* The INDEX'th bit of SET value whose VALUE_TYPE is TYPE,
+   and whose VALUE_CONTENTS is valaddr.
+   Return -1 if out of range, -2 other error. */
+
+int
+value_bit_index (type, valaddr, index)
+     struct type *type;
+     char *valaddr;
+     int index;
+{
+  LONGEST low_bound, high_bound;
+  LONGEST word;
+  unsigned rel_index;
+  struct type *range = TYPE_FIELD_TYPE (type, 0);
+  if (get_discrete_bounds (range, &low_bound, &high_bound) < 0)
+    return -2;
+  if (index < low_bound || index > high_bound)
+    return -1;
+  rel_index = index - low_bound;
+  word = unpack_long (builtin_type_unsigned_char,
+		      valaddr + (rel_index / TARGET_CHAR_BIT));
+  rel_index %= TARGET_CHAR_BIT;
+  if (BITS_BIG_ENDIAN)
+    rel_index = TARGET_CHAR_BIT - 1 - rel_index;
+  return (word >> rel_index) & 1;
+}
+
+value_ptr
+value_in (element, set)
+     value_ptr element, set;
+{
+  int member;
+  struct type *settype = check_typedef (VALUE_TYPE (set));
+  struct type *eltype = check_typedef (VALUE_TYPE (element));
+  if (TYPE_CODE (eltype) == TYPE_CODE_RANGE)
+    eltype = TYPE_TARGET_TYPE (eltype);
+  if (TYPE_CODE (settype) != TYPE_CODE_SET)
+    error ("Second argument of 'IN' has wrong type");
+  if (TYPE_CODE (eltype) != TYPE_CODE_INT
+      && TYPE_CODE (eltype) != TYPE_CODE_CHAR
+      && TYPE_CODE (eltype) != TYPE_CODE_ENUM
+      && TYPE_CODE (eltype) != TYPE_CODE_BOOL)
+    error ("First argument of 'IN' has wrong type");
+  member = value_bit_index (settype, VALUE_CONTENTS (set),
+			    value_as_long (element));
+  if (member < 0)
+    error ("First argument of 'IN' not in range");
+  return value_from_longest (LA_BOOL_TYPE, member);
+}
+
+void
+_initialize_valarith ()
+{
+}
diff --git a/gdb/valops.c b/gdb/valops.c
new file mode 100644
index 0000000..77d2396
--- /dev/null
+++ b/gdb/valops.c
@@ -0,0 +1,3461 @@
+/* Perform non-arithmetic operations on values, for GDB.
+   Copyright 1986, 87, 89, 91, 92, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "frame.h"
+#include "inferior.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "demangle.h"
+#include "language.h"
+#include "gdbcmd.h"
+
+#include <errno.h>
+#include "gdb_string.h"
+
+/* Default to coercing float to double in function calls only when there is
+   no prototype.  Otherwise on targets where the debug information is incorrect
+   for either the prototype or non-prototype case, we can force it by defining
+   COERCE_FLOAT_TO_DOUBLE in the target configuration file. */
+
+#ifndef COERCE_FLOAT_TO_DOUBLE
+#define COERCE_FLOAT_TO_DOUBLE (param_type == NULL)
+#endif
+
+/* Flag indicating HP compilers were used; needed to correctly handle some
+   value operations with HP aCC code/runtime. */
+extern int hp_som_som_object_present;
+
+
+/* Local functions.  */
+
+static int typecmp PARAMS ((int staticp, struct type *t1[], value_ptr t2[]));
+
+#ifdef CALL_DUMMY
+static CORE_ADDR find_function_addr PARAMS ((value_ptr, struct type **));
+static value_ptr value_arg_coerce PARAMS ((value_ptr, struct type *, int));
+#endif
+
+
+#ifndef PUSH_ARGUMENTS
+static CORE_ADDR value_push PARAMS ((CORE_ADDR, value_ptr));
+#endif
+
+static value_ptr search_struct_field PARAMS ((char *, value_ptr, int,
+					      struct type *, int));
+
+static value_ptr search_struct_field_aux PARAMS ((char *, value_ptr, int,
+                                                  struct type *, int, int *, char *,
+                                                  struct type **));
+
+static value_ptr search_struct_method PARAMS ((char *, value_ptr *,
+					       value_ptr *,
+					       int, int *, struct type *));
+
+static int check_field_in PARAMS ((struct type *, const char *));
+
+static CORE_ADDR allocate_space_in_inferior PARAMS ((int));
+
+static value_ptr cast_into_complex PARAMS ((struct type *, value_ptr));
+
+void _initialize_valops PARAMS ((void));
+
+#define VALUE_SUBSTRING_START(VAL) VALUE_FRAME(VAL)
+
+/* Flag for whether we want to abandon failed expression evals by default.  */
+
+#if 0
+static int auto_abandon = 0;
+#endif
+
+int overload_resolution = 0;
+
+
+
+/* Find the address of function name NAME in the inferior.  */
+
+value_ptr
+find_function_in_inferior (name)
+     char *name;
+{
+  register struct symbol *sym;
+  sym = lookup_symbol (name, 0, VAR_NAMESPACE, 0, NULL);
+  if (sym != NULL)
+    {
+      if (SYMBOL_CLASS (sym) != LOC_BLOCK)
+	{
+	  error ("\"%s\" exists in this program but is not a function.",
+		 name);
+	}
+      return value_of_variable (sym, NULL);
+    }
+  else
+    {
+      struct minimal_symbol *msymbol = lookup_minimal_symbol(name, NULL, NULL);
+      if (msymbol != NULL)
+	{
+	  struct type *type;
+	  LONGEST maddr;
+	  type = lookup_pointer_type (builtin_type_char);
+	  type = lookup_function_type (type);
+	  type = lookup_pointer_type (type);
+	  maddr = (LONGEST) SYMBOL_VALUE_ADDRESS (msymbol);
+	  return value_from_longest (type, maddr);
+	}
+      else
+	{
+          if (!target_has_execution)
+	    error ("evaluation of this expression requires the target program to be active");
+          else
+	    error ("evaluation of this expression requires the program to have a function \"%s\".", name);
+	}
+    }
+}
+
+/* Allocate NBYTES of space in the inferior using the inferior's malloc
+   and return a value that is a pointer to the allocated space. */
+
+value_ptr
+value_allocate_space_in_inferior (len)
+     int len;
+{
+  value_ptr blocklen;
+  register value_ptr val = find_function_in_inferior ("malloc");
+
+  blocklen = value_from_longest (builtin_type_int, (LONGEST) len);
+  val = call_function_by_hand (val, 1, &blocklen);
+  if (value_logical_not (val))
+    {
+      if (!target_has_execution)
+        error ("No memory available to program now: you need to start the target first");
+      else 
+        error ("No memory available to program: call to malloc failed");
+    }
+  return val;
+}
+
+static CORE_ADDR
+allocate_space_in_inferior (len)
+     int len;
+{
+  return value_as_long (value_allocate_space_in_inferior (len));
+}
+
+/* Cast value ARG2 to type TYPE and return as a value.
+   More general than a C cast: accepts any two types of the same length,
+   and if ARG2 is an lvalue it can be cast into anything at all.  */
+/* In C++, casts may change pointer or object representations.  */
+
+value_ptr
+value_cast (type, arg2)
+     struct type *type;
+     register value_ptr arg2;
+{
+  register enum type_code code1;
+  register enum type_code code2;
+  register int scalar;
+  struct type *type2;
+
+  int convert_to_boolean = 0;
+  
+  if (VALUE_TYPE (arg2) == type)
+    return arg2;
+
+  CHECK_TYPEDEF (type);
+  code1 = TYPE_CODE (type);
+  COERCE_REF(arg2);
+  type2 = check_typedef (VALUE_TYPE (arg2));
+
+  /* A cast to an undetermined-length array_type, such as (TYPE [])OBJECT,
+     is treated like a cast to (TYPE [N])OBJECT,
+     where N is sizeof(OBJECT)/sizeof(TYPE). */
+  if (code1 == TYPE_CODE_ARRAY)
+    {
+      struct type *element_type = TYPE_TARGET_TYPE (type);
+      unsigned element_length = TYPE_LENGTH (check_typedef (element_type));
+      if (element_length > 0
+	  && TYPE_ARRAY_UPPER_BOUND_TYPE (type) == BOUND_CANNOT_BE_DETERMINED)
+	{
+	  struct type *range_type = TYPE_INDEX_TYPE (type);
+	  int val_length = TYPE_LENGTH (type2);
+	  LONGEST low_bound, high_bound, new_length;
+	  if (get_discrete_bounds (range_type, &low_bound, &high_bound) < 0)
+	    low_bound = 0, high_bound = 0;
+	  new_length = val_length / element_length;
+	  if (val_length % element_length != 0)
+	    warning("array element type size does not divide object size in cast");
+	  /* FIXME-type-allocation: need a way to free this type when we are
+	     done with it.  */
+	  range_type = create_range_type ((struct type *) NULL,
+					  TYPE_TARGET_TYPE (range_type),
+					  low_bound,
+					  new_length + low_bound - 1);
+	  VALUE_TYPE (arg2) = create_array_type ((struct type *) NULL,
+						 element_type, range_type);
+	  return arg2;
+	}
+    }
+
+  if (current_language->c_style_arrays
+      && TYPE_CODE (type2) == TYPE_CODE_ARRAY)
+    arg2 = value_coerce_array (arg2);
+
+  if (TYPE_CODE (type2) == TYPE_CODE_FUNC)
+    arg2 = value_coerce_function (arg2);
+
+  type2 = check_typedef (VALUE_TYPE (arg2));
+  COERCE_VARYING_ARRAY (arg2, type2);
+  code2 = TYPE_CODE (type2);
+
+  if (code1 == TYPE_CODE_COMPLEX)
+    return cast_into_complex (type, arg2);
+  if (code1 == TYPE_CODE_BOOL)
+    {
+      code1 = TYPE_CODE_INT;
+      convert_to_boolean = 1;
+    }
+  if (code1 == TYPE_CODE_CHAR)
+    code1 = TYPE_CODE_INT;
+  if (code2 == TYPE_CODE_BOOL || code2 == TYPE_CODE_CHAR)
+    code2 = TYPE_CODE_INT;
+
+  scalar = (code2 == TYPE_CODE_INT || code2 == TYPE_CODE_FLT
+	    || code2 == TYPE_CODE_ENUM || code2 == TYPE_CODE_RANGE);
+
+  if (   code1 == TYPE_CODE_STRUCT
+      && code2 == TYPE_CODE_STRUCT
+      && TYPE_NAME (type) != 0)
+    {
+      /* Look in the type of the source to see if it contains the
+	 type of the target as a superclass.  If so, we'll need to
+	 offset the object in addition to changing its type.  */
+      value_ptr v = search_struct_field (type_name_no_tag (type),
+					 arg2, 0, type2, 1);
+      if (v)
+	{
+	  VALUE_TYPE (v) = type;
+	  return v;
+	}
+    }
+  if (code1 == TYPE_CODE_FLT && scalar)
+    return value_from_double (type, value_as_double (arg2));
+  else if ((code1 == TYPE_CODE_INT || code1 == TYPE_CODE_ENUM
+	    || code1 == TYPE_CODE_RANGE)
+	   && (scalar || code2 == TYPE_CODE_PTR))
+    {
+      LONGEST longest;
+      
+      if (hp_som_som_object_present &&  /* if target compiled by HP aCC */ 
+          (code2 == TYPE_CODE_PTR))
+        {
+          unsigned int * ptr;
+          value_ptr retvalp;
+          
+          switch (TYPE_CODE (TYPE_TARGET_TYPE (type2)))
+            {
+              /* With HP aCC, pointers to data members have a bias */ 
+              case TYPE_CODE_MEMBER:
+                retvalp = value_from_longest (type, value_as_long (arg2));
+                ptr = (unsigned int *) VALUE_CONTENTS (retvalp); /* force evaluation */
+                *ptr &= ~0x20000000; /* zap 29th bit to remove bias */ 
+                return retvalp;
+
+              /* While pointers to methods don't really point to a function */ 
+              case TYPE_CODE_METHOD:
+                error ("Pointers to methods not supported with HP aCC");
+
+              default:
+                break; /* fall out and go to normal handling */ 
+            }
+        }
+      longest = value_as_long (arg2);
+      return value_from_longest (type, convert_to_boolean ? (LONGEST) (longest ? 1 : 0) : longest);
+    }
+  else if (TYPE_LENGTH (type) == TYPE_LENGTH (type2))
+    {
+      if (code1 == TYPE_CODE_PTR && code2 == TYPE_CODE_PTR)
+	{
+	  struct type *t1 = check_typedef (TYPE_TARGET_TYPE (type));
+	  struct type *t2 = check_typedef (TYPE_TARGET_TYPE (type2));
+	  if (   TYPE_CODE (t1) == TYPE_CODE_STRUCT
+	      && TYPE_CODE (t2) == TYPE_CODE_STRUCT
+	      && !value_logical_not (arg2))
+	    {
+	      value_ptr v;
+
+	      /* Look in the type of the source to see if it contains the
+		 type of the target as a superclass.  If so, we'll need to
+		 offset the pointer rather than just change its type.  */
+	      if (TYPE_NAME (t1) != NULL)
+		{
+		  v = search_struct_field (type_name_no_tag (t1),
+					   value_ind (arg2), 0, t2, 1);
+		  if (v)
+		    {
+		      v = value_addr (v);
+		      VALUE_TYPE (v) = type;
+		      return v;
+		    }
+		}
+
+	      /* Look in the type of the target to see if it contains the
+		 type of the source as a superclass.  If so, we'll need to
+		 offset the pointer rather than just change its type.
+		 FIXME: This fails silently with virtual inheritance.  */
+	      if (TYPE_NAME (t2) != NULL)
+		{
+		  v = search_struct_field (type_name_no_tag (t2),
+					   value_zero (t1, not_lval), 0, t1, 1);
+		  if (v)
+		    {
+		      value_ptr v2 = value_ind (arg2);
+		      VALUE_ADDRESS (v2) -= VALUE_ADDRESS (v)
+					    + VALUE_OFFSET (v);
+		      v2 = value_addr (v2);
+		      VALUE_TYPE (v2) = type;
+		      return v2;
+		    }
+		}
+	    }
+	  /* No superclass found, just fall through to change ptr type.  */
+	}
+      VALUE_TYPE (arg2) = type;
+      VALUE_ENCLOSING_TYPE (arg2) = type;  /* pai: chk_val */
+      VALUE_POINTED_TO_OFFSET (arg2) = 0;  /* pai: chk_val */
+      return arg2;
+    }
+  else if (chill_varying_type (type))
+    {
+      struct type *range1, *range2, *eltype1, *eltype2;
+      value_ptr val;
+      int count1, count2;
+      LONGEST low_bound, high_bound;
+      char *valaddr, *valaddr_data;
+      /* For lint warning about eltype2 possibly uninitialized: */
+      eltype2 = NULL;
+      if (code2 == TYPE_CODE_BITSTRING)
+	error ("not implemented: converting bitstring to varying type");
+      if ((code2 != TYPE_CODE_ARRAY && code2 != TYPE_CODE_STRING)
+	  || (eltype1 = check_typedef (TYPE_TARGET_TYPE (TYPE_FIELD_TYPE (type, 1))),
+	      eltype2 = check_typedef (TYPE_TARGET_TYPE (type2)),
+	      (TYPE_LENGTH (eltype1) != TYPE_LENGTH (eltype2)
+	       /* || TYPE_CODE (eltype1) != TYPE_CODE (eltype2) */ )))
+	error ("Invalid conversion to varying type");
+      range1 = TYPE_FIELD_TYPE (TYPE_FIELD_TYPE (type, 1), 0);
+      range2 = TYPE_FIELD_TYPE (type2, 0);
+      if (get_discrete_bounds (range1, &low_bound, &high_bound) < 0)
+	count1 = -1;
+      else
+	count1 = high_bound - low_bound + 1;
+      if (get_discrete_bounds (range2, &low_bound, &high_bound) < 0)
+	count1 = -1, count2 = 0;  /* To force error before */
+      else
+	count2 = high_bound - low_bound + 1;
+      if (count2 > count1)
+	error ("target varying type is too small");
+      val = allocate_value (type);
+      valaddr = VALUE_CONTENTS_RAW (val);
+      valaddr_data = valaddr + TYPE_FIELD_BITPOS (type, 1) / 8;
+      /* Set val's __var_length field to count2. */
+      store_signed_integer (valaddr, TYPE_LENGTH (TYPE_FIELD_TYPE (type, 0)),
+			    count2);
+      /* Set the __var_data field to count2 elements copied from arg2. */
+      memcpy (valaddr_data, VALUE_CONTENTS (arg2),
+	      count2 * TYPE_LENGTH (eltype2));
+      /* Zero the rest of the __var_data field of val. */
+      memset (valaddr_data + count2 * TYPE_LENGTH (eltype2), '\0',
+	      (count1 - count2) * TYPE_LENGTH (eltype2));
+      return val;
+    }
+  else if (VALUE_LVAL (arg2) == lval_memory)
+    {
+      return value_at_lazy (type, VALUE_ADDRESS (arg2) + VALUE_OFFSET (arg2),
+			    VALUE_BFD_SECTION (arg2));
+    }
+  else if (code1 == TYPE_CODE_VOID)
+    {
+      return value_zero (builtin_type_void, not_lval);
+    }
+  else
+    {
+      error ("Invalid cast.");
+      return 0;
+    }
+}
+
+/* Create a value of type TYPE that is zero, and return it.  */
+
+value_ptr
+value_zero (type, lv)
+     struct type *type;
+     enum lval_type lv;
+{
+  register value_ptr val = allocate_value (type);
+
+  memset (VALUE_CONTENTS (val), 0, TYPE_LENGTH (check_typedef (type)));
+  VALUE_LVAL (val) = lv;
+
+  return val;
+}
+
+/* Return a value with type TYPE located at ADDR.  
+
+   Call value_at only if the data needs to be fetched immediately;
+   if we can be 'lazy' and defer the fetch, perhaps indefinately, call
+   value_at_lazy instead.  value_at_lazy simply records the address of
+   the data and sets the lazy-evaluation-required flag.  The lazy flag 
+   is tested in the VALUE_CONTENTS macro, which is used if and when 
+   the contents are actually required. 
+
+   Note: value_at does *NOT* handle embedded offsets; perform such
+   adjustments before or after calling it. */
+
+value_ptr
+value_at (type, addr, sect)
+     struct type *type;
+     CORE_ADDR addr;
+     asection *sect;
+{
+  register value_ptr val;
+
+  if (TYPE_CODE (check_typedef (type)) == TYPE_CODE_VOID)
+    error ("Attempt to dereference a generic pointer.");
+
+  val = allocate_value (type);
+
+#ifdef GDB_TARGET_IS_D10V
+  if (TYPE_CODE (type) == TYPE_CODE_PTR
+      && TYPE_TARGET_TYPE (type)
+      && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
+    {
+      /* pointer to function */
+      unsigned long num;
+      unsigned short snum;
+      snum = read_memory_unsigned_integer (addr, 2);
+      num = D10V_MAKE_IADDR(snum);
+      store_address ( VALUE_CONTENTS_RAW (val), 4, num);
+    }
+  else if (TYPE_CODE(type) == TYPE_CODE_PTR)
+    {
+      /* pointer to data */
+      unsigned long num;
+      unsigned short snum;
+      snum = read_memory_unsigned_integer (addr, 2);
+      num = D10V_MAKE_DADDR(snum);
+      store_address ( VALUE_CONTENTS_RAW (val), 4, num); 
+    }
+  else
+#endif
+    read_memory_section (addr, VALUE_CONTENTS_ALL_RAW (val), TYPE_LENGTH (type), sect);
+
+  VALUE_LVAL (val) = lval_memory;
+  VALUE_ADDRESS (val) = addr;
+  VALUE_BFD_SECTION (val) = sect;
+
+  return val;
+}
+
+/* Return a lazy value with type TYPE located at ADDR (cf. value_at).  */
+
+value_ptr
+value_at_lazy (type, addr, sect)
+     struct type *type;
+     CORE_ADDR addr;
+     asection *sect;
+{
+  register value_ptr val;
+
+  if (TYPE_CODE (check_typedef (type)) == TYPE_CODE_VOID)
+    error ("Attempt to dereference a generic pointer.");
+
+  val = allocate_value (type);
+
+  VALUE_LVAL (val) = lval_memory;
+  VALUE_ADDRESS (val) = addr;
+  VALUE_LAZY (val) = 1;
+  VALUE_BFD_SECTION (val) = sect;
+
+  return val;
+}
+
+/* Called only from the VALUE_CONTENTS and VALUE_CONTENTS_ALL macros, 
+   if the current data for a variable needs to be loaded into 
+   VALUE_CONTENTS(VAL).  Fetches the data from the user's process, and 
+   clears the lazy flag to indicate that the data in the buffer is valid.
+
+   If the value is zero-length, we avoid calling read_memory, which would
+   abort.  We mark the value as fetched anyway -- all 0 bytes of it.
+
+   This function returns a value because it is used in the VALUE_CONTENTS
+   macro as part of an expression, where a void would not work.  The
+   value is ignored.  */
+
+int
+value_fetch_lazy (val)
+     register value_ptr val;
+{
+  CORE_ADDR addr = VALUE_ADDRESS (val) + VALUE_OFFSET (val);
+  int length = TYPE_LENGTH (VALUE_ENCLOSING_TYPE (val));
+
+#ifdef GDB_TARGET_IS_D10V
+  struct type *type = VALUE_TYPE(val);
+  if (TYPE_CODE (type) == TYPE_CODE_PTR
+      && TYPE_TARGET_TYPE (type)
+      && (TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_FUNC))
+    {
+      /* pointer to function */
+      unsigned long num;
+      unsigned short snum;
+      snum = read_memory_unsigned_integer (addr, 2);
+      num = D10V_MAKE_IADDR(snum);
+      store_address ( VALUE_CONTENTS_RAW (val), 4, num);
+    }
+  else if (TYPE_CODE(type) == TYPE_CODE_PTR)
+    {
+      /* pointer to data */
+      unsigned long num;
+      unsigned short snum;
+      snum = read_memory_unsigned_integer (addr, 2);
+      num = D10V_MAKE_DADDR(snum);
+      store_address ( VALUE_CONTENTS_RAW (val), 4, num); 
+    }
+  else
+#endif
+
+  if (length)
+    read_memory_section (addr, VALUE_CONTENTS_ALL_RAW (val), length,
+			 VALUE_BFD_SECTION (val));
+  VALUE_LAZY (val) = 0;
+  return 0;
+}
+
+
+/* Store the contents of FROMVAL into the location of TOVAL.
+   Return a new value with the location of TOVAL and contents of FROMVAL.  */
+
+value_ptr
+value_assign (toval, fromval)
+     register value_ptr toval, fromval;
+{
+  register struct type *type;
+  register value_ptr val;
+  char raw_buffer[MAX_REGISTER_RAW_SIZE];
+  int use_buffer = 0;
+
+  if (!toval->modifiable)
+    error ("Left operand of assignment is not a modifiable lvalue.");
+
+  COERCE_REF (toval);
+
+  type = VALUE_TYPE (toval);
+  if (VALUE_LVAL (toval) != lval_internalvar)
+    fromval = value_cast (type, fromval);
+  else
+    COERCE_ARRAY (fromval);
+  CHECK_TYPEDEF (type);
+
+  /* If TOVAL is a special machine register requiring conversion
+     of program values to a special raw format,
+     convert FROMVAL's contents now, with result in `raw_buffer',
+     and set USE_BUFFER to the number of bytes to write.  */
+
+#ifdef REGISTER_CONVERTIBLE
+  if (VALUE_REGNO (toval) >= 0
+      && REGISTER_CONVERTIBLE (VALUE_REGNO (toval)))
+    {
+      int regno = VALUE_REGNO (toval);
+      if (REGISTER_CONVERTIBLE (regno))
+	{
+	  struct type *fromtype = check_typedef (VALUE_TYPE (fromval));
+	  REGISTER_CONVERT_TO_RAW (fromtype, regno,
+				   VALUE_CONTENTS (fromval), raw_buffer);
+	  use_buffer = REGISTER_RAW_SIZE (regno);
+	}
+    }
+#endif
+
+  switch (VALUE_LVAL (toval))
+    {
+    case lval_internalvar:
+      set_internalvar (VALUE_INTERNALVAR (toval), fromval);
+      val = value_copy (VALUE_INTERNALVAR (toval)->value);
+      VALUE_ENCLOSING_TYPE (val) = VALUE_ENCLOSING_TYPE (fromval);
+      VALUE_EMBEDDED_OFFSET (val) = VALUE_EMBEDDED_OFFSET (fromval);
+      VALUE_POINTED_TO_OFFSET (val) = VALUE_POINTED_TO_OFFSET (fromval);
+      return val;
+
+    case lval_internalvar_component:
+      set_internalvar_component (VALUE_INTERNALVAR (toval),
+				 VALUE_OFFSET (toval),
+				 VALUE_BITPOS (toval),
+				 VALUE_BITSIZE (toval),
+				 fromval);
+      break;
+
+    case lval_memory:
+      {
+	char *dest_buffer;
+        CORE_ADDR changed_addr;
+        int changed_len;
+
+        if (VALUE_BITSIZE (toval))
+          {
+	    char buffer[sizeof (LONGEST)];
+	    /* We assume that the argument to read_memory is in units of
+	       host chars.  FIXME:  Is that correct?  */
+	    changed_len = (VALUE_BITPOS (toval)
+		     + VALUE_BITSIZE (toval)
+		     + HOST_CHAR_BIT - 1)
+		    / HOST_CHAR_BIT;
+
+	    if (changed_len > (int) sizeof (LONGEST))
+	      error ("Can't handle bitfields which don't fit in a %d bit word.",
+		     sizeof (LONGEST) * HOST_CHAR_BIT);
+
+	    read_memory (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+			 buffer, changed_len);
+	    modify_field (buffer, value_as_long (fromval),
+			  VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
+	    changed_addr = VALUE_ADDRESS (toval) + VALUE_OFFSET (toval);
+	    dest_buffer = buffer;
+	  }
+	else if (use_buffer)
+	  {
+	    changed_addr = VALUE_ADDRESS (toval) + VALUE_OFFSET (toval);
+	    changed_len = use_buffer;
+	    dest_buffer = raw_buffer;
+	  }
+	else
+	  {
+	    changed_addr = VALUE_ADDRESS (toval) + VALUE_OFFSET (toval);
+	    changed_len = TYPE_LENGTH (type);
+	    dest_buffer = VALUE_CONTENTS (fromval);
+	  }
+
+	write_memory (changed_addr, dest_buffer, changed_len);
+	if (memory_changed_hook)
+	  memory_changed_hook (changed_addr, changed_len);
+      }
+      break;
+
+    case lval_register:
+      if (VALUE_BITSIZE (toval))
+	{
+	  char buffer[sizeof (LONGEST)];
+          int len = REGISTER_RAW_SIZE (VALUE_REGNO (toval));
+
+	  if (len > (int) sizeof (LONGEST))
+	    error ("Can't handle bitfields in registers larger than %d bits.",
+		   sizeof (LONGEST) * HOST_CHAR_BIT);
+
+	  if (VALUE_BITPOS (toval) + VALUE_BITSIZE (toval)
+	      > len * HOST_CHAR_BIT)
+	    /* Getting this right would involve being very careful about
+	       byte order.  */
+	    error ("\
+Can't handle bitfield which doesn't fit in a single register.");
+
+          read_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+                               buffer, len);
+          modify_field (buffer, value_as_long (fromval),
+                        VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
+          write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+                                buffer, len);
+	}
+      else if (use_buffer)
+	write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+			      raw_buffer, use_buffer);
+      else
+        {
+	  /* Do any conversion necessary when storing this type to more
+	     than one register.  */
+#ifdef REGISTER_CONVERT_FROM_TYPE
+	  memcpy (raw_buffer, VALUE_CONTENTS (fromval), TYPE_LENGTH (type));
+	  REGISTER_CONVERT_FROM_TYPE(VALUE_REGNO (toval), type, raw_buffer);
+	  write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+				raw_buffer, TYPE_LENGTH (type));
+#else
+	  write_register_bytes (VALUE_ADDRESS (toval) + VALUE_OFFSET (toval),
+			        VALUE_CONTENTS (fromval), TYPE_LENGTH (type));
+#endif
+	}
+      /* Assigning to the stack pointer, frame pointer, and other
+	 (architecture and calling convention specific) registers may
+	 cause the frame cache to be out of date.  We just do this
+	 on all assignments to registers for simplicity; I doubt the slowdown
+	 matters.  */
+      reinit_frame_cache ();
+      break;
+
+    case lval_reg_frame_relative:
+      {
+	/* value is stored in a series of registers in the frame
+	   specified by the structure.  Copy that value out, modify
+	   it, and copy it back in.  */
+	int amount_to_copy = (VALUE_BITSIZE (toval) ? 1 : TYPE_LENGTH (type));
+	int reg_size = REGISTER_RAW_SIZE (VALUE_FRAME_REGNUM (toval));
+	int byte_offset = VALUE_OFFSET (toval) % reg_size;
+	int reg_offset = VALUE_OFFSET (toval) / reg_size;
+	int amount_copied;
+
+	/* Make the buffer large enough in all cases.  */
+	char *buffer = (char *) alloca (amount_to_copy
+					+ sizeof (LONGEST)
+					+ MAX_REGISTER_RAW_SIZE);
+
+	int regno;
+	struct frame_info *frame;
+
+	/* Figure out which frame this is in currently.  */
+	for (frame = get_current_frame ();
+	     frame && FRAME_FP (frame) != VALUE_FRAME (toval);
+	     frame = get_prev_frame (frame))
+	  ;
+
+	if (!frame)
+	  error ("Value being assigned to is no longer active.");
+
+	amount_to_copy += (reg_size - amount_to_copy % reg_size);
+
+	/* Copy it out.  */
+	for ((regno = VALUE_FRAME_REGNUM (toval) + reg_offset,
+	      amount_copied = 0);
+	     amount_copied < amount_to_copy;
+	     amount_copied += reg_size, regno++)
+	  {
+	    get_saved_register (buffer + amount_copied,
+				(int *)NULL, (CORE_ADDR *)NULL,
+				frame, regno, (enum lval_type *)NULL);
+	  }
+
+	/* Modify what needs to be modified.  */
+	if (VALUE_BITSIZE (toval))
+	  modify_field (buffer + byte_offset,
+			value_as_long (fromval),
+			VALUE_BITPOS (toval), VALUE_BITSIZE (toval));
+	else if (use_buffer)
+	  memcpy (buffer + byte_offset, raw_buffer, use_buffer);
+	else
+	  memcpy (buffer + byte_offset, VALUE_CONTENTS (fromval),
+		  TYPE_LENGTH (type));
+
+	/* Copy it back.  */
+	for ((regno = VALUE_FRAME_REGNUM (toval) + reg_offset,
+	      amount_copied = 0);
+	     amount_copied < amount_to_copy;
+	     amount_copied += reg_size, regno++)
+	  {
+	    enum lval_type lval;
+	    CORE_ADDR addr;
+	    int optim;
+
+	    /* Just find out where to put it.  */
+	    get_saved_register ((char *)NULL,
+			        &optim, &addr, frame, regno, &lval);
+	    
+	    if (optim)
+	      error ("Attempt to assign to a value that was optimized out.");
+	    if (lval == lval_memory)
+	      write_memory (addr, buffer + amount_copied, reg_size);
+	    else if (lval == lval_register)
+	      write_register_bytes (addr, buffer + amount_copied, reg_size);
+	    else
+	      error ("Attempt to assign to an unmodifiable value.");
+	  }
+
+	if (register_changed_hook)
+	  register_changed_hook (-1);
+      }
+      break;
+	
+
+    default:
+      error ("Left operand of assignment is not an lvalue.");
+    }
+
+  /* If the field does not entirely fill a LONGEST, then zero the sign bits.
+     If the field is signed, and is negative, then sign extend. */
+  if ((VALUE_BITSIZE (toval) > 0)
+      && (VALUE_BITSIZE (toval) < 8 * (int) sizeof (LONGEST)))
+    {
+      LONGEST fieldval = value_as_long (fromval);
+      LONGEST valmask = (((ULONGEST) 1) << VALUE_BITSIZE (toval)) - 1;
+
+      fieldval &= valmask;
+      if (!TYPE_UNSIGNED (type) && (fieldval & (valmask ^ (valmask >> 1))))
+	fieldval |= ~valmask;
+
+      fromval = value_from_longest (type, fieldval);
+    }
+
+  val = value_copy (toval);
+  memcpy (VALUE_CONTENTS_RAW (val), VALUE_CONTENTS (fromval),
+	  TYPE_LENGTH (type));
+  VALUE_TYPE (val) = type;
+  VALUE_ENCLOSING_TYPE (val) = VALUE_ENCLOSING_TYPE (fromval);
+  VALUE_EMBEDDED_OFFSET (val) = VALUE_EMBEDDED_OFFSET (fromval);
+  VALUE_POINTED_TO_OFFSET (val) = VALUE_POINTED_TO_OFFSET (fromval);
+  
+  return val;
+}
+
+/* Extend a value VAL to COUNT repetitions of its type.  */
+
+value_ptr
+value_repeat (arg1, count)
+     value_ptr arg1;
+     int count;
+{
+  register value_ptr val;
+
+  if (VALUE_LVAL (arg1) != lval_memory)
+    error ("Only values in memory can be extended with '@'.");
+  if (count < 1)
+    error ("Invalid number %d of repetitions.", count);
+
+  val = allocate_repeat_value (VALUE_ENCLOSING_TYPE (arg1), count);
+
+  read_memory (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1),
+	       VALUE_CONTENTS_ALL_RAW (val),
+	       TYPE_LENGTH (VALUE_ENCLOSING_TYPE (val)));
+  VALUE_LVAL (val) = lval_memory;
+  VALUE_ADDRESS (val) = VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1);
+
+  return val;
+}
+
+value_ptr
+value_of_variable (var, b)
+     struct symbol *var;
+     struct block *b;
+{
+  value_ptr val;
+  struct frame_info *frame = NULL;
+
+  if (!b)
+    frame = NULL;		/* Use selected frame.  */
+  else if (symbol_read_needs_frame (var))
+    {
+      frame = block_innermost_frame (b);
+      if (!frame)
+        {
+	  if (BLOCK_FUNCTION (b)
+	      && SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)))
+	    error ("No frame is currently executing in block %s.",
+		   SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)));
+	  else
+	    error ("No frame is currently executing in specified block");
+        }
+    }
+
+  val = read_var_value (var, frame);
+  if (!val)
+    error ("Address of symbol \"%s\" is unknown.", SYMBOL_SOURCE_NAME (var));
+
+  return val;
+}
+
+/* Given a value which is an array, return a value which is a pointer to its
+   first element, regardless of whether or not the array has a nonzero lower
+   bound.
+
+   FIXME:  A previous comment here indicated that this routine should be
+   substracting the array's lower bound.  It's not clear to me that this
+   is correct.  Given an array subscripting operation, it would certainly
+   work to do the adjustment here, essentially computing:
+
+   (&array[0] - (lowerbound * sizeof array[0])) + (index * sizeof array[0])
+
+   However I believe a more appropriate and logical place to account for
+   the lower bound is to do so in value_subscript, essentially computing:
+
+   (&array[0] + ((index - lowerbound) * sizeof array[0]))
+
+   As further evidence consider what would happen with operations other
+   than array subscripting, where the caller would get back a value that
+   had an address somewhere before the actual first element of the array,
+   and the information about the lower bound would be lost because of
+   the coercion to pointer type.
+   */
+
+value_ptr
+value_coerce_array (arg1)
+     value_ptr arg1;
+{
+  register struct type *type = check_typedef (VALUE_TYPE (arg1));
+
+  if (VALUE_LVAL (arg1) != lval_memory)
+    error ("Attempt to take address of value not located in memory.");
+
+  return value_from_longest (lookup_pointer_type (TYPE_TARGET_TYPE (type)),
+		       (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+}
+
+/* Given a value which is a function, return a value which is a pointer
+   to it.  */
+
+value_ptr
+value_coerce_function (arg1)
+     value_ptr arg1;
+{
+  value_ptr retval;
+
+  if (VALUE_LVAL (arg1) != lval_memory)
+    error ("Attempt to take address of value not located in memory.");
+
+  retval = value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
+			       (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+  VALUE_BFD_SECTION (retval) = VALUE_BFD_SECTION (arg1);
+  return retval;
+}  
+
+/* Return a pointer value for the object for which ARG1 is the contents.  */
+
+value_ptr
+value_addr (arg1)
+     value_ptr arg1;
+{
+  value_ptr arg2;
+
+  struct type *type = check_typedef (VALUE_TYPE (arg1));
+  if (TYPE_CODE (type) == TYPE_CODE_REF)
+    {
+      /* Copy the value, but change the type from (T&) to (T*).
+	 We keep the same location information, which is efficient,
+	 and allows &(&X) to get the location containing the reference. */
+      arg2 = value_copy (arg1);
+      VALUE_TYPE (arg2) = lookup_pointer_type (TYPE_TARGET_TYPE (type));
+      return arg2;
+    }
+  if (TYPE_CODE (type) == TYPE_CODE_FUNC)
+    return value_coerce_function (arg1);
+
+  if (VALUE_LVAL (arg1) != lval_memory)
+    error ("Attempt to take address of value not located in memory.");
+
+  /* Get target memory address */  
+  arg2 = value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
+			       (LONGEST) (VALUE_ADDRESS (arg1) 
+					  + VALUE_OFFSET (arg1)
+					  + VALUE_EMBEDDED_OFFSET (arg1)));
+
+  /* This may be a pointer to a base subobject; so remember the
+     full derived object's type ... */ 
+  VALUE_ENCLOSING_TYPE (arg2) = lookup_pointer_type (VALUE_ENCLOSING_TYPE (arg1));
+  /* ... and also the relative position of the subobject in the full object */ 
+  VALUE_POINTED_TO_OFFSET (arg2) = VALUE_EMBEDDED_OFFSET (arg1);  
+  VALUE_BFD_SECTION (arg2) = VALUE_BFD_SECTION (arg1);
+  return arg2;
+}
+
+/* Given a value of a pointer type, apply the C unary * operator to it.  */
+
+value_ptr
+value_ind (arg1)
+     value_ptr arg1;
+{
+  struct type *base_type;
+  value_ptr arg2;
+  value_ptr real_val;
+
+  COERCE_ARRAY (arg1);
+
+  base_type = check_typedef (VALUE_TYPE (arg1));
+
+  if (TYPE_CODE (base_type) == TYPE_CODE_MEMBER)
+    error ("not implemented: member types in value_ind");
+
+  /* Allow * on an integer so we can cast it to whatever we want.
+     This returns an int, which seems like the most C-like thing
+     to do.  "long long" variables are rare enough that
+     BUILTIN_TYPE_LONGEST would seem to be a mistake.  */
+  if (TYPE_CODE (base_type) == TYPE_CODE_INT)
+    return value_at (builtin_type_int,
+		     (CORE_ADDR) value_as_long (arg1),
+		     VALUE_BFD_SECTION (arg1));
+  else if (TYPE_CODE (base_type) == TYPE_CODE_PTR)
+    {
+      struct type *enc_type;
+      /* We may be pointing to something embedded in a larger object */
+      /* Get the real type of the enclosing object */ 
+      enc_type = check_typedef (VALUE_ENCLOSING_TYPE (arg1));
+      enc_type = TYPE_TARGET_TYPE (enc_type);
+      /* Retrieve the enclosing object pointed to */ 
+      arg2 =  value_at_lazy (enc_type, 
+			     value_as_pointer (arg1) - VALUE_POINTED_TO_OFFSET (arg1),
+                             VALUE_BFD_SECTION (arg1));
+      /* Re-adjust type */ 
+      VALUE_TYPE (arg2) = TYPE_TARGET_TYPE (base_type);
+      /* Add embedding info */
+      VALUE_ENCLOSING_TYPE (arg2) = enc_type;
+      VALUE_EMBEDDED_OFFSET (arg2) = VALUE_POINTED_TO_OFFSET (arg1);
+
+      /* We may be pointing to an object of some derived type */
+      arg2 = value_full_object (arg2, NULL, 0, 0, 0);
+      return arg2;
+    }
+
+  error ("Attempt to take contents of a non-pointer value.");
+  return 0;  /* For lint -- never reached */
+}
+
+/* Pushing small parts of stack frames.  */
+
+/* Push one word (the size of object that a register holds).  */
+
+CORE_ADDR
+push_word (sp, word)
+     CORE_ADDR sp;
+     ULONGEST word;
+{
+  register int len = REGISTER_SIZE;
+  char buffer[MAX_REGISTER_RAW_SIZE];
+
+  store_unsigned_integer (buffer, len, word);
+  if (INNER_THAN (1, 2))
+    {
+      /* stack grows downward */
+      sp -= len;
+      write_memory (sp, buffer, len);
+    }
+  else
+    {
+      /* stack grows upward */
+      write_memory (sp, buffer, len);
+      sp += len;
+    }
+
+  return sp;
+}
+
+/* Push LEN bytes with data at BUFFER.  */
+
+CORE_ADDR
+push_bytes (sp, buffer, len)
+     CORE_ADDR sp;
+     char *buffer;
+     int len;
+{
+  if (INNER_THAN (1, 2))
+    {
+      /* stack grows downward */
+      sp -= len;
+      write_memory (sp, buffer, len);
+    }
+  else
+    {
+      /* stack grows upward */
+      write_memory (sp, buffer, len);
+      sp += len;
+    }
+
+  return sp;
+}
+
+/* Push onto the stack the specified value VALUE.  */
+
+#ifndef PUSH_ARGUMENTS
+
+static CORE_ADDR
+value_push (sp, arg)
+     register CORE_ADDR sp;
+     value_ptr arg;
+{
+  register int len = TYPE_LENGTH (VALUE_ENCLOSING_TYPE (arg));
+
+  if (INNER_THAN (1, 2))
+    {
+      /* stack grows downward */
+      sp -= len;
+      write_memory (sp, VALUE_CONTENTS_ALL (arg), len);
+    }
+  else
+    {
+      /* stack grows upward */
+      write_memory (sp, VALUE_CONTENTS_ALL (arg), len);
+      sp += len;
+    }
+
+  return sp;
+}
+
+#endif	/* !PUSH_ARGUMENTS */
+
+#ifdef CALL_DUMMY
+/* Perform the standard coercions that are specified
+   for arguments to be passed to C functions.
+
+   If PARAM_TYPE is non-NULL, it is the expected parameter type.
+   IS_PROTOTYPED is non-zero if the function declaration is prototyped.  */
+
+static value_ptr
+value_arg_coerce (arg, param_type, is_prototyped)
+     value_ptr arg;
+     struct type *param_type;
+     int is_prototyped;
+{
+  register struct type *arg_type = check_typedef (VALUE_TYPE (arg));
+  register struct type *type
+    = param_type ? check_typedef (param_type) : arg_type;
+
+  switch (TYPE_CODE (type))
+    {
+    case TYPE_CODE_REF:
+      if (TYPE_CODE (arg_type) != TYPE_CODE_REF)
+	{
+	  arg = value_addr (arg);
+	  VALUE_TYPE (arg) = param_type;
+	  return arg;
+	}
+      break;
+    case TYPE_CODE_INT:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_ENUM:
+      /* If we don't have a prototype, coerce to integer type if necessary.  */
+      if (!is_prototyped)
+	{
+	  if (TYPE_LENGTH (type) < TYPE_LENGTH (builtin_type_int))
+	    type = builtin_type_int;
+	}
+      /* Currently all target ABIs require at least the width of an integer
+	 type for an argument.  We may have to conditionalize the following
+	 type coercion for future targets.  */
+      if (TYPE_LENGTH (type) < TYPE_LENGTH (builtin_type_int))
+	type = builtin_type_int;
+      break;
+    case TYPE_CODE_FLT:
+      /* FIXME: We should always convert floats to doubles in the
+	 non-prototyped case.  As many debugging formats include
+	 no information about prototyping, we have to live with
+	 COERCE_FLOAT_TO_DOUBLE for now.  */
+      if (!is_prototyped && COERCE_FLOAT_TO_DOUBLE)
+	{
+	  if (TYPE_LENGTH (type) < TYPE_LENGTH (builtin_type_double))
+	    type = builtin_type_double;
+	  else if (TYPE_LENGTH (type) > TYPE_LENGTH (builtin_type_double))
+	    type = builtin_type_long_double;
+	}
+      break;
+    case TYPE_CODE_FUNC:
+      type = lookup_pointer_type (type);
+      break;
+    case TYPE_CODE_ARRAY:
+      if (current_language->c_style_arrays)
+	type = lookup_pointer_type (TYPE_TARGET_TYPE (type));
+      break;
+    case TYPE_CODE_UNDEF:
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_STRUCT:
+    case TYPE_CODE_UNION:
+    case TYPE_CODE_VOID:
+    case TYPE_CODE_SET:
+    case TYPE_CODE_RANGE:
+    case TYPE_CODE_STRING:
+    case TYPE_CODE_BITSTRING:
+    case TYPE_CODE_ERROR:
+    case TYPE_CODE_MEMBER:
+    case TYPE_CODE_METHOD:
+    case TYPE_CODE_COMPLEX:
+    default:
+      break;
+    }
+
+  return value_cast (type, arg);
+}
+
+/* Determine a function's address and its return type from its value. 
+   Calls error() if the function is not valid for calling.  */
+
+static CORE_ADDR
+find_function_addr (function, retval_type)
+     value_ptr function;
+     struct type **retval_type;
+{
+  register struct type *ftype = check_typedef (VALUE_TYPE (function));
+  register enum type_code code = TYPE_CODE (ftype);
+  struct type *value_type;
+  CORE_ADDR funaddr;
+
+  /* If it's a member function, just look at the function
+     part of it.  */
+
+  /* Determine address to call.  */
+  if (code == TYPE_CODE_FUNC || code == TYPE_CODE_METHOD)
+    {
+      funaddr = VALUE_ADDRESS (function);
+      value_type = TYPE_TARGET_TYPE (ftype);
+    }
+  else if (code == TYPE_CODE_PTR)
+    {
+      funaddr = value_as_pointer (function);
+      ftype = check_typedef (TYPE_TARGET_TYPE (ftype));
+      if (TYPE_CODE (ftype) == TYPE_CODE_FUNC
+	  || TYPE_CODE (ftype) == TYPE_CODE_METHOD)
+	{
+#ifdef CONVERT_FROM_FUNC_PTR_ADDR
+	  /* FIXME: This is a workaround for the unusual function
+	     pointer representation on the RS/6000, see comment
+	     in config/rs6000/tm-rs6000.h  */
+	  funaddr = CONVERT_FROM_FUNC_PTR_ADDR (funaddr);
+#endif
+	  value_type = TYPE_TARGET_TYPE (ftype);
+	}
+      else
+	value_type = builtin_type_int;
+    }
+  else if (code == TYPE_CODE_INT)
+    {
+      /* Handle the case of functions lacking debugging info.
+	 Their values are characters since their addresses are char */
+      if (TYPE_LENGTH (ftype) == 1)
+	funaddr = value_as_pointer (value_addr (function));
+      else
+	/* Handle integer used as address of a function.  */
+	funaddr = (CORE_ADDR) value_as_long (function);
+
+      value_type = builtin_type_int;
+    }
+  else
+    error ("Invalid data type for function to be called.");
+
+  *retval_type = value_type;
+  return funaddr;
+}
+
+/* All this stuff with a dummy frame may seem unnecessarily complicated
+   (why not just save registers in GDB?).  The purpose of pushing a dummy
+   frame which looks just like a real frame is so that if you call a
+   function and then hit a breakpoint (get a signal, etc), "backtrace"
+   will look right.  Whether the backtrace needs to actually show the
+   stack at the time the inferior function was called is debatable, but
+   it certainly needs to not display garbage.  So if you are contemplating
+   making dummy frames be different from normal frames, consider that.  */
+
+/* Perform a function call in the inferior.
+   ARGS is a vector of values of arguments (NARGS of them).
+   FUNCTION is a value, the function to be called.
+   Returns a value representing what the function returned.
+   May fail to return, if a breakpoint or signal is hit
+   during the execution of the function.
+
+   ARGS is modified to contain coerced values. */
+
+value_ptr
+call_function_by_hand (function, nargs, args)
+     value_ptr function;
+     int nargs;
+     value_ptr *args;
+{
+  register CORE_ADDR sp;
+  register int i;
+  CORE_ADDR start_sp;
+  /* CALL_DUMMY is an array of words (REGISTER_SIZE), but each word
+     is in host byte order.  Before calling FIX_CALL_DUMMY, we byteswap it
+     and remove any extra bytes which might exist because ULONGEST is
+     bigger than REGISTER_SIZE.  
+
+     NOTE: This is pretty wierd, as the call dummy is actually a
+           sequence of instructions.  But CISC machines will have
+           to pack the instructions into REGISTER_SIZE units (and
+           so will RISC machines for which INSTRUCTION_SIZE is not
+           REGISTER_SIZE). */
+
+  static ULONGEST dummy[] = CALL_DUMMY;
+  char dummy1[REGISTER_SIZE * sizeof dummy / sizeof (ULONGEST)];
+  CORE_ADDR old_sp;
+  struct type *value_type;
+  unsigned char struct_return;
+  CORE_ADDR struct_addr = 0;
+  struct inferior_status inf_status;
+  struct cleanup *old_chain;
+  CORE_ADDR funaddr;
+  int using_gcc;	/* Set to version of gcc in use, or zero if not gcc */
+  CORE_ADDR real_pc;
+  struct type *param_type = NULL;
+  struct type *ftype = check_typedef (SYMBOL_TYPE (function));
+
+  if (!target_has_execution)
+    noprocess();
+
+  save_inferior_status (&inf_status, 1);
+  old_chain = make_cleanup ((make_cleanup_func) restore_inferior_status, 
+                            &inf_status);
+
+  /* PUSH_DUMMY_FRAME is responsible for saving the inferior registers
+     (and POP_FRAME for restoring them).  (At least on most machines)
+     they are saved on the stack in the inferior.  */
+  PUSH_DUMMY_FRAME;
+
+  old_sp = sp = read_sp ();
+
+  if (INNER_THAN (1, 2))
+    {
+      /* Stack grows down */
+      sp -= sizeof dummy1;
+      start_sp = sp;
+    }
+  else
+    {
+      /* Stack grows up */
+      start_sp = sp;
+      sp += sizeof dummy1;
+    }
+
+  funaddr = find_function_addr (function, &value_type);
+  CHECK_TYPEDEF (value_type);
+
+  {
+    struct block *b = block_for_pc (funaddr);
+    /* If compiled without -g, assume GCC 2.  */
+    using_gcc = (b == NULL ? 2 : BLOCK_GCC_COMPILED (b));
+  }
+
+  /* Are we returning a value using a structure return or a normal
+     value return? */
+
+  struct_return = using_struct_return (function, funaddr, value_type,
+				       using_gcc);
+
+  /* Create a call sequence customized for this function
+     and the number of arguments for it.  */
+  for (i = 0; i < (int) (sizeof (dummy) / sizeof (dummy[0])); i++)
+    store_unsigned_integer (&dummy1[i * REGISTER_SIZE],
+			    REGISTER_SIZE,
+			    (ULONGEST)dummy[i]);
+
+#ifdef GDB_TARGET_IS_HPPA
+  real_pc = FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
+			    value_type, using_gcc);
+#else
+  FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
+		  value_type, using_gcc);
+  real_pc = start_sp;
+#endif
+
+#if CALL_DUMMY_LOCATION == ON_STACK
+  write_memory (start_sp, (char *)dummy1, sizeof dummy1);
+#endif /* On stack.  */
+
+#if CALL_DUMMY_LOCATION == BEFORE_TEXT_END
+  /* Convex Unix prohibits executing in the stack segment. */
+  /* Hope there is empty room at the top of the text segment. */
+  {
+    extern CORE_ADDR text_end;
+    static checked = 0;
+    if (!checked)
+      for (start_sp = text_end - sizeof dummy1; start_sp < text_end; ++start_sp)
+	if (read_memory_integer (start_sp, 1) != 0)
+	  error ("text segment full -- no place to put call");
+    checked = 1;
+    sp = old_sp;
+    real_pc = text_end - sizeof dummy1;
+    write_memory (real_pc, (char *)dummy1, sizeof dummy1);
+  }
+#endif /* Before text_end.  */
+
+#if CALL_DUMMY_LOCATION == AFTER_TEXT_END
+  {
+    extern CORE_ADDR text_end;
+    int errcode;
+    sp = old_sp;
+    real_pc = text_end;
+    errcode = target_write_memory (real_pc, (char *)dummy1, sizeof dummy1);
+    if (errcode != 0)
+      error ("Cannot write text segment -- call_function failed");
+  }
+#endif /* After text_end.  */
+
+#if CALL_DUMMY_LOCATION == AT_ENTRY_POINT
+  real_pc = funaddr;
+#endif /* At entry point.  */
+
+#ifdef lint
+  sp = old_sp;		/* It really is used, for some ifdef's... */
+#endif
+
+  if (nargs < TYPE_NFIELDS (ftype))
+    error ("too few arguments in function call");
+
+  for (i = nargs - 1; i >= 0; i--)
+    {
+      /* If we're off the end of the known arguments, do the standard
+	 promotions.  FIXME: if we had a prototype, this should only
+	 be allowed if ... were present.  */
+      if (i >= TYPE_NFIELDS (ftype))
+	args[i] = value_arg_coerce (args[i], NULL, 0);
+
+      else 
+	{
+	  int is_prototyped = TYPE_FLAGS (ftype) & TYPE_FLAG_PROTOTYPED;
+	  param_type = TYPE_FIELD_TYPE (ftype, i);
+
+	  args[i] = value_arg_coerce (args[i], param_type, is_prototyped);
+	}
+
+      /*elz: this code is to handle the case in which the function to be called 
+	has a pointer to function as parameter and the corresponding actual argument 
+	is the address of a function and not a pointer to function variable.
+	In aCC compiled code, the calls through pointers to functions (in the body
+	of the function called by hand) are made via $$dyncall_external which
+	requires some registers setting, this is taken care of if we call 
+	via a function pointer variable, but not via a function address. 
+	In cc this is not a problem. */
+
+      if (using_gcc == 0)
+	if (param_type)
+	  /* if this parameter is a pointer to function*/
+	  if (TYPE_CODE (param_type) == TYPE_CODE_PTR)
+	    if (TYPE_CODE (param_type->target_type) == TYPE_CODE_FUNC)
+	      /* elz: FIXME here should go the test about the compiler used 
+                    to compile the target. We want to issue the error
+                    message only if the compiler used was HP's aCC. 
+                    If we used HP's cc, then there is no problem and no need 
+                    to return at this point */
+	      if (using_gcc == 0) /* && compiler == aCC*/
+		/* go see if the actual parameter is a variable of type
+                pointer to function or just a function */
+		if (args[i]->lval == not_lval)
+		  {
+		    char *arg_name;
+		    if (find_pc_partial_function((CORE_ADDR)args[i]->aligner.contents[0], &arg_name, NULL, NULL))
+		      error("\
+You cannot use function <%s> as argument. \n\
+You must use a pointer to function type variable. Command ignored.", arg_name);
+		  }   
+    }
+
+#if defined (REG_STRUCT_HAS_ADDR)
+  {
+    /* This is a machine like the sparc, where we may need to pass a pointer
+       to the structure, not the structure itself.  */
+    for (i = nargs - 1; i >= 0; i--)
+      {
+	struct type *arg_type = check_typedef (VALUE_TYPE (args[i]));
+	if ((TYPE_CODE (arg_type) == TYPE_CODE_STRUCT
+	     || TYPE_CODE (arg_type) == TYPE_CODE_UNION
+	     || TYPE_CODE (arg_type) == TYPE_CODE_ARRAY
+	     || TYPE_CODE (arg_type) == TYPE_CODE_STRING
+	     || TYPE_CODE (arg_type) == TYPE_CODE_BITSTRING
+	     || TYPE_CODE (arg_type) == TYPE_CODE_SET
+	     || (TYPE_CODE (arg_type) == TYPE_CODE_FLT
+		 && TYPE_LENGTH (arg_type) > 8)
+	     )
+	  && REG_STRUCT_HAS_ADDR (using_gcc, arg_type))
+	  {
+	    CORE_ADDR addr;
+	    int len; /*  = TYPE_LENGTH (arg_type); */ 
+            int aligned_len;
+            arg_type = check_typedef (VALUE_ENCLOSING_TYPE (args[i])); 
+            len = TYPE_LENGTH (arg_type);
+
+#ifdef STACK_ALIGN
+  /* MVS 11/22/96: I think at least some of this stack_align code is
+     really broken.  Better to let PUSH_ARGUMENTS adjust the stack in
+     a target-defined manner.  */
+	    aligned_len = STACK_ALIGN (len);
+#else
+	    aligned_len = len;
+#endif
+	    if (INNER_THAN (1, 2))
+	      {
+		/* stack grows downward */
+		sp -= aligned_len;
+	      }
+	    else
+	      {
+		/* The stack grows up, so the address of the thing we push
+		   is the stack pointer before we push it.  */
+		addr = sp;
+	      }
+	    /* Push the structure.  */
+	    write_memory (sp, VALUE_CONTENTS_ALL (args[i]), len);
+	    if (INNER_THAN (1, 2))
+	      {
+		/* The stack grows down, so the address of the thing we push
+		   is the stack pointer after we push it.  */
+		addr = sp;
+	      }
+	    else
+	      {
+		/* stack grows upward */
+		sp += aligned_len;
+	      }
+	    /* The value we're going to pass is the address of the thing
+	       we just pushed.  */
+	    /*args[i] = value_from_longest (lookup_pointer_type (value_type),
+					  (LONGEST) addr);*/
+	    args[i] = value_from_longest (lookup_pointer_type (arg_type), 
+					  (LONGEST) addr);
+	  }
+      }
+  }
+#endif /* REG_STRUCT_HAS_ADDR.  */
+
+  /* Reserve space for the return structure to be written on the
+     stack, if necessary */
+
+  if (struct_return)
+    {
+      int len = TYPE_LENGTH (value_type);
+#ifdef STACK_ALIGN
+  /* MVS 11/22/96: I think at least some of this stack_align code is
+     really broken.  Better to let PUSH_ARGUMENTS adjust the stack in
+     a target-defined manner.  */
+      len = STACK_ALIGN (len);
+#endif
+      if (INNER_THAN (1, 2))
+	{
+	  /* stack grows downward */
+	  sp -= len;
+	  struct_addr = sp;
+	}
+      else
+	{
+	  /* stack grows upward */
+	  struct_addr = sp;
+	  sp += len;
+	}
+    }
+
+/* elz: on HPPA no need for this extra alignment, maybe it is needed
+   on other architectures. This is because all the alignment is taken care
+   of in the above code (ifdef REG_STRUCT_HAS_ADDR) and in 
+   hppa_push_arguments*/
+#ifndef NO_EXTRA_ALIGNMENT_NEEDED
+
+#if defined(STACK_ALIGN)
+  /* MVS 11/22/96: I think at least some of this stack_align code is
+     really broken.  Better to let PUSH_ARGUMENTS adjust the stack in
+     a target-defined manner.  */
+  if (INNER_THAN (1, 2))
+    {
+      /* If stack grows down, we must leave a hole at the top. */
+      int len = 0;
+
+      for (i = nargs - 1; i >= 0; i--)
+	len += TYPE_LENGTH (VALUE_ENCLOSING_TYPE (args[i]));
+#ifdef CALL_DUMMY_STACK_ADJUST
+      len += CALL_DUMMY_STACK_ADJUST;
+#endif
+      sp -= STACK_ALIGN (len) - len;
+    }
+#endif /* STACK_ALIGN */
+#endif /* NO_EXTRA_ALIGNMENT_NEEDED */
+
+#ifdef PUSH_ARGUMENTS
+  PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr);
+#else /* !PUSH_ARGUMENTS */
+  for (i = nargs - 1; i >= 0; i--)
+    sp = value_push (sp, args[i]);
+#endif /* !PUSH_ARGUMENTS */
+
+#ifdef PUSH_RETURN_ADDRESS	/* for targets that use no CALL_DUMMY */
+  /* There are a number of targets now which actually don't write any
+     CALL_DUMMY instructions into the target, but instead just save the
+     machine state, push the arguments, and jump directly to the callee
+     function.  Since this doesn't actually involve executing a JSR/BSR
+     instruction, the return address must be set up by hand, either by
+     pushing onto the stack or copying into a return-address register
+     as appropriate.  Formerly this has been done in PUSH_ARGUMENTS, 
+     but that's overloading its functionality a bit, so I'm making it
+     explicit to do it here.  */
+  sp = PUSH_RETURN_ADDRESS(real_pc, sp);
+#endif	/* PUSH_RETURN_ADDRESS */
+
+#if defined(STACK_ALIGN)
+  if (! INNER_THAN (1, 2))
+    {
+      /* If stack grows up, we must leave a hole at the bottom, note
+	 that sp already has been advanced for the arguments!  */
+#ifdef CALL_DUMMY_STACK_ADJUST
+      sp += CALL_DUMMY_STACK_ADJUST;
+#endif
+      sp = STACK_ALIGN (sp);
+    }
+#endif /* STACK_ALIGN */
+
+/* XXX This seems wrong.  For stacks that grow down we shouldn't do
+   anything here!  */
+  /* MVS 11/22/96: I think at least some of this stack_align code is
+     really broken.  Better to let PUSH_ARGUMENTS adjust the stack in
+     a target-defined manner.  */
+#ifdef CALL_DUMMY_STACK_ADJUST
+  if (INNER_THAN (1, 2))
+    {
+      /* stack grows downward */
+      sp -= CALL_DUMMY_STACK_ADJUST;
+    }
+#endif /* CALL_DUMMY_STACK_ADJUST */
+
+  /* Store the address at which the structure is supposed to be
+     written.  Note that this (and the code which reserved the space
+     above) assumes that gcc was used to compile this function.  Since
+     it doesn't cost us anything but space and if the function is pcc
+     it will ignore this value, we will make that assumption.
+
+     Also note that on some machines (like the sparc) pcc uses a 
+     convention like gcc's.  */
+
+  if (struct_return)
+    STORE_STRUCT_RETURN (struct_addr, sp);
+
+  /* Write the stack pointer.  This is here because the statements above
+     might fool with it.  On SPARC, this write also stores the register
+     window into the right place in the new stack frame, which otherwise
+     wouldn't happen.  (See store_inferior_registers in sparc-nat.c.)  */
+  write_sp (sp);
+
+  {
+    char retbuf[REGISTER_BYTES];
+    char *name;
+    struct symbol *symbol;
+
+    name = NULL;
+    symbol = find_pc_function (funaddr);
+    if (symbol)
+      {
+	name = SYMBOL_SOURCE_NAME (symbol);
+      }
+    else
+      {
+	/* Try the minimal symbols.  */
+	struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (funaddr);
+
+	if (msymbol)
+	  {
+	    name = SYMBOL_SOURCE_NAME (msymbol);
+	  }
+      }
+    if (name == NULL)
+      {
+	char format[80];
+	sprintf (format, "at %s", local_hex_format ());
+	name = alloca (80);
+	/* FIXME-32x64: assumes funaddr fits in a long.  */
+	sprintf (name, format, (unsigned long) funaddr);
+      }
+
+    /* Execute the stack dummy routine, calling FUNCTION.
+       When it is done, discard the empty frame
+       after storing the contents of all regs into retbuf.  */
+    if (run_stack_dummy (real_pc + CALL_DUMMY_START_OFFSET, retbuf))
+      {
+	/* We stopped somewhere besides the call dummy.  */
+
+	/* If we did the cleanups, we would print a spurious error message
+	   (Unable to restore previously selected frame), would write the
+	   registers from the inf_status (which is wrong), and would do other
+	   wrong things (like set stop_bpstat to the wrong thing).  */
+	discard_cleanups (old_chain);
+	/* Prevent memory leak.  */
+	bpstat_clear (&inf_status.stop_bpstat);
+
+	/* The following error message used to say "The expression
+	   which contained the function call has been discarded."  It
+	   is a hard concept to explain in a few words.  Ideally, GDB
+	   would be able to resume evaluation of the expression when
+	   the function finally is done executing.  Perhaps someday
+	   this will be implemented (it would not be easy).  */
+
+	/* FIXME: Insert a bunch of wrap_here; name can be very long if it's
+	   a C++ name with arguments and stuff.  */
+	error ("\
+The program being debugged stopped while in a function called from GDB.\n\
+When the function (%s) is done executing, GDB will silently\n\
+stop (instead of continuing to evaluate the expression containing\n\
+the function call).", name);
+      }
+
+    do_cleanups (old_chain);
+
+    /* Figure out the value returned by the function.  */
+/* elz: I defined this new macro for the hppa architecture only.
+   this gives us a way to get the value returned by the function from the stack,
+   at the same address we told the function to put it.
+   We cannot assume on the pa that r28 still contains the address of the returned
+   structure. Usually this will be overwritten by the callee.
+   I don't know about other architectures, so I defined this macro
+*/
+
+#ifdef VALUE_RETURNED_FROM_STACK
+    if (struct_return)
+      return (value_ptr) VALUE_RETURNED_FROM_STACK (value_type, struct_addr);
+#endif
+
+    return value_being_returned (value_type, retbuf, struct_return);
+  }
+}
+#else /* no CALL_DUMMY.  */
+value_ptr
+call_function_by_hand (function, nargs, args)
+     value_ptr function;
+     int nargs;
+     value_ptr *args;
+{
+  error ("Cannot invoke functions on this machine.");
+}
+#endif /* no CALL_DUMMY.  */
+
+
+/* Create a value for an array by allocating space in the inferior, copying
+   the data into that space, and then setting up an array value.
+
+   The array bounds are set from LOWBOUND and HIGHBOUND, and the array is
+   populated from the values passed in ELEMVEC.
+
+   The element type of the array is inherited from the type of the
+   first element, and all elements must have the same size (though we
+   don't currently enforce any restriction on their types). */
+
+value_ptr
+value_array (lowbound, highbound, elemvec)
+     int lowbound;
+     int highbound;
+     value_ptr *elemvec;
+{
+  int nelem;
+  int idx;
+  unsigned int typelength;
+  value_ptr val;
+  struct type *rangetype;
+  struct type *arraytype;
+  CORE_ADDR addr;
+
+  /* Validate that the bounds are reasonable and that each of the elements
+     have the same size. */
+
+  nelem = highbound - lowbound + 1;
+  if (nelem <= 0)
+    {
+      error ("bad array bounds (%d, %d)", lowbound, highbound);
+    }
+  typelength = TYPE_LENGTH (VALUE_ENCLOSING_TYPE (elemvec[0]));
+  for (idx = 1; idx < nelem; idx++)
+    {
+      if (TYPE_LENGTH (VALUE_ENCLOSING_TYPE (elemvec[idx])) != typelength)
+	{
+	  error ("array elements must all be the same size");
+	}
+    }
+
+  rangetype = create_range_type ((struct type *) NULL, builtin_type_int,
+				 lowbound, highbound);
+  arraytype = create_array_type ((struct type *) NULL, 
+				 VALUE_ENCLOSING_TYPE (elemvec[0]), rangetype);
+
+  if (!current_language->c_style_arrays)
+    {
+      val = allocate_value (arraytype);
+      for (idx = 0; idx < nelem; idx++)
+	{
+	  memcpy (VALUE_CONTENTS_ALL_RAW (val) + (idx * typelength),
+		  VALUE_CONTENTS_ALL (elemvec[idx]),
+		  typelength);
+	}
+      VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (elemvec[0]);
+      return val;
+    }
+
+  /* Allocate space to store the array in the inferior, and then initialize
+     it by copying in each element.  FIXME:  Is it worth it to create a
+     local buffer in which to collect each value and then write all the
+     bytes in one operation? */
+
+  addr = allocate_space_in_inferior (nelem * typelength);
+  for (idx = 0; idx < nelem; idx++)
+    {
+      write_memory (addr + (idx * typelength), VALUE_CONTENTS_ALL (elemvec[idx]),
+		    typelength);
+    }
+
+  /* Create the array type and set up an array value to be evaluated lazily. */
+
+  val = value_at_lazy (arraytype, addr, VALUE_BFD_SECTION (elemvec[0]));
+  return (val);
+}
+
+/* Create a value for a string constant by allocating space in the inferior,
+   copying the data into that space, and returning the address with type
+   TYPE_CODE_STRING.  PTR points to the string constant data; LEN is number
+   of characters.
+   Note that string types are like array of char types with a lower bound of
+   zero and an upper bound of LEN - 1.  Also note that the string may contain
+   embedded null bytes. */
+
+value_ptr
+value_string (ptr, len)
+     char *ptr;
+     int len;
+{
+  value_ptr val;
+  int lowbound = current_language->string_lower_bound;
+  struct type *rangetype = create_range_type ((struct type *) NULL,
+					      builtin_type_int,
+					      lowbound, len + lowbound - 1);
+  struct type *stringtype
+    = create_string_type ((struct type *) NULL, rangetype);
+  CORE_ADDR addr;
+
+  if (current_language->c_style_arrays == 0)
+    {
+      val = allocate_value (stringtype);
+      memcpy (VALUE_CONTENTS_RAW (val), ptr, len);
+      return val;
+    }
+
+
+  /* Allocate space to store the string in the inferior, and then
+     copy LEN bytes from PTR in gdb to that address in the inferior. */
+
+  addr = allocate_space_in_inferior (len);
+  write_memory (addr, ptr, len);
+
+  val = value_at_lazy (stringtype, addr, NULL);
+  return (val);
+}
+
+value_ptr
+value_bitstring (ptr, len)
+     char *ptr;
+     int len;
+{
+  value_ptr val;
+  struct type *domain_type = create_range_type (NULL, builtin_type_int,
+						0, len - 1);
+  struct type *type = create_set_type ((struct type*) NULL, domain_type);
+  TYPE_CODE (type) = TYPE_CODE_BITSTRING;
+  val = allocate_value (type);
+  memcpy (VALUE_CONTENTS_RAW (val), ptr, TYPE_LENGTH (type));
+  return val;
+}
+
+/* See if we can pass arguments in T2 to a function which takes arguments
+   of types T1.  Both t1 and t2 are NULL-terminated vectors.  If some
+   arguments need coercion of some sort, then the coerced values are written
+   into T2.  Return value is 0 if the arguments could be matched, or the
+   position at which they differ if not.
+
+   STATICP is nonzero if the T1 argument list came from a
+   static member function.
+
+   For non-static member functions, we ignore the first argument,
+   which is the type of the instance variable.  This is because we want
+   to handle calls with objects from derived classes.  This is not
+   entirely correct: we should actually check to make sure that a
+   requested operation is type secure, shouldn't we?  FIXME.  */
+
+static int
+typecmp (staticp, t1, t2)
+     int staticp;
+     struct type *t1[];
+     value_ptr t2[];
+{
+  int i;
+
+  if (t2 == 0)
+    return 1;
+  if (staticp && t1 == 0)
+    return t2[1] != 0;
+  if (t1 == 0)
+    return 1;
+  if (TYPE_CODE (t1[0]) == TYPE_CODE_VOID) return 0;
+  if (t1[!staticp] == 0) return 0;
+  for (i = !staticp; t1[i] && TYPE_CODE (t1[i]) != TYPE_CODE_VOID; i++)
+    {
+    struct type *tt1, *tt2;
+      if (! t2[i])
+	return i+1;
+      tt1 = check_typedef (t1[i]);
+      tt2 = check_typedef (VALUE_TYPE(t2[i]));
+      if (TYPE_CODE (tt1) == TYPE_CODE_REF
+	  /* We should be doing hairy argument matching, as below.  */
+	  && (TYPE_CODE (check_typedef (TYPE_TARGET_TYPE (tt1))) == TYPE_CODE (tt2)))
+	{
+	  if (TYPE_CODE (tt2) == TYPE_CODE_ARRAY)
+	    t2[i] = value_coerce_array (t2[i]);
+	  else
+	    t2[i] = value_addr (t2[i]);
+	  continue;
+	}
+
+      while (TYPE_CODE (tt1) == TYPE_CODE_PTR
+	  && (   TYPE_CODE (tt2) == TYPE_CODE_ARRAY
+	      || TYPE_CODE (tt2) == TYPE_CODE_PTR))
+	{
+	   tt1 = check_typedef (TYPE_TARGET_TYPE(tt1)); 
+	   tt2 = check_typedef (TYPE_TARGET_TYPE(tt2));
+	}
+      if (TYPE_CODE(tt1) == TYPE_CODE(tt2)) continue;
+      /* Array to pointer is a `trivial conversion' according to the ARM.  */
+
+      /* We should be doing much hairier argument matching (see section 13.2
+	 of the ARM), but as a quick kludge, just check for the same type
+	 code.  */
+      if (TYPE_CODE (t1[i]) != TYPE_CODE (VALUE_TYPE (t2[i])))
+	return i+1;
+    }
+  if (!t1[i]) return 0;
+  return t2[i] ? i+1 : 0;
+}
+
+/* Helper function used by value_struct_elt to recurse through baseclasses.
+   Look for a field NAME in ARG1. Adjust the address of ARG1 by OFFSET bytes,
+   and search in it assuming it has (class) type TYPE.
+   If found, return value, else return NULL.
+
+   If LOOKING_FOR_BASECLASS, then instead of looking for struct fields,
+   look for a baseclass named NAME.  */
+
+static value_ptr
+search_struct_field (name, arg1, offset, type, looking_for_baseclass)
+     char *name;
+     register value_ptr arg1;
+     int offset;
+     register struct type *type;
+     int looking_for_baseclass;
+{
+  int i;
+  int nbases = TYPE_N_BASECLASSES (type);
+
+  CHECK_TYPEDEF (type);
+
+  if (! looking_for_baseclass)
+    for (i = TYPE_NFIELDS (type) - 1; i >= nbases; i--)
+      {
+	char *t_field_name = TYPE_FIELD_NAME (type, i);
+
+	if (t_field_name && STREQ (t_field_name, name))
+	  {
+	    value_ptr v;
+	    if (TYPE_FIELD_STATIC (type, i))
+	      v = value_static_field (type, i);
+	    else
+	      v = value_primitive_field (arg1, offset, i, type);
+	    if (v == 0)
+	      error("there is no field named %s", name);
+	    return v;
+	  }
+
+	if (t_field_name
+	    && (t_field_name[0] == '\0'
+		|| (TYPE_CODE (type) == TYPE_CODE_UNION
+		    && STREQ (t_field_name, "else"))))
+	  {
+	    struct type *field_type = TYPE_FIELD_TYPE (type, i);
+	    if (TYPE_CODE (field_type) == TYPE_CODE_UNION
+		|| TYPE_CODE (field_type) == TYPE_CODE_STRUCT)
+	      {
+		/* Look for a match through the fields of an anonymous union,
+		   or anonymous struct.  C++ provides anonymous unions.
+
+		   In the GNU Chill implementation of variant record types,
+		   each <alternative field> has an (anonymous) union type,
+		   each member of the union represents a <variant alternative>.
+		   Each <variant alternative> is represented as a struct,
+		   with a member for each <variant field>.  */
+		   
+		value_ptr v;
+		int new_offset = offset;
+
+		/* This is pretty gross.  In G++, the offset in an anonymous
+		   union is relative to the beginning of the enclosing struct.
+		   In the GNU Chill implementation of variant records,
+		   the bitpos is zero in an anonymous union field, so we
+		   have to add the offset of the union here. */
+		if (TYPE_CODE (field_type) == TYPE_CODE_STRUCT
+		    || (TYPE_NFIELDS (field_type) > 0
+			&& TYPE_FIELD_BITPOS (field_type, 0) == 0))
+		  new_offset += TYPE_FIELD_BITPOS (type, i) / 8;
+
+		v = search_struct_field (name, arg1, new_offset, field_type,
+					 looking_for_baseclass);
+		if (v)
+		  return v;
+	      }
+	  }
+      }
+
+  for (i = 0;  i < nbases;  i++)
+    {
+      value_ptr v;
+      struct type *basetype = check_typedef (TYPE_BASECLASS (type, i));
+      /* If we are looking for baseclasses, this is what we get when we
+	 hit them.  But it could happen that the base part's member name
+	 is not yet filled in.  */
+      int found_baseclass = (looking_for_baseclass
+			     && TYPE_BASECLASS_NAME (type, i) != NULL
+			     && STREQ (name, TYPE_BASECLASS_NAME (type, i)));
+
+      if (BASETYPE_VIA_VIRTUAL (type, i))
+	{
+	  int boffset;
+	  value_ptr v2 = allocate_value (basetype);
+
+	  boffset = baseclass_offset (type, i,
+				      VALUE_CONTENTS (arg1) + offset,
+				      VALUE_ADDRESS (arg1)
+					+ VALUE_OFFSET (arg1) + offset);
+	  if (boffset == -1)
+	    error ("virtual baseclass botch");
+
+	  /* The virtual base class pointer might have been clobbered by the
+	     user program. Make sure that it still points to a valid memory
+	     location.  */
+
+	  boffset += offset;
+	  if (boffset < 0 || boffset >= TYPE_LENGTH (type))
+	    {
+	      CORE_ADDR base_addr;
+	
+	      base_addr = VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1) + boffset;
+	      if (target_read_memory (base_addr, VALUE_CONTENTS_RAW (v2),
+				      TYPE_LENGTH (basetype)) != 0)
+		error ("virtual baseclass botch");
+	      VALUE_LVAL (v2) = lval_memory;
+	      VALUE_ADDRESS (v2) = base_addr;
+	    }
+	  else
+	    {
+	      VALUE_LVAL (v2) = VALUE_LVAL (arg1);
+	      VALUE_ADDRESS (v2) = VALUE_ADDRESS (arg1);
+	      VALUE_OFFSET (v2) = VALUE_OFFSET (arg1) + boffset;
+	      if (VALUE_LAZY (arg1))
+		VALUE_LAZY (v2) = 1;
+	      else
+		memcpy (VALUE_CONTENTS_RAW (v2),
+			VALUE_CONTENTS_RAW (arg1) + boffset,
+			TYPE_LENGTH (basetype));
+	    }
+
+	  if (found_baseclass)
+	    return v2;
+	  v = search_struct_field (name, v2, 0, TYPE_BASECLASS (type, i),
+				   looking_for_baseclass);
+	}
+      else if (found_baseclass)
+	v = value_primitive_field (arg1, offset, i, type);
+      else
+	v = search_struct_field (name, arg1,
+				 offset + TYPE_BASECLASS_BITPOS (type, i) / 8,
+				 basetype, looking_for_baseclass);
+      if (v) return v;
+    }
+  return NULL;
+}
+
+
+/* Return the offset (in bytes) of the virtual base of type BASETYPE
+ * in an object pointed to by VALADDR (on the host), assumed to be of
+ * type TYPE.  OFFSET is number of bytes beyond start of ARG to start
+ * looking (in case VALADDR is the contents of an enclosing object).
+ *
+ * This routine recurses on the primary base of the derived class because
+ * the virtual base entries of the primary base appear before the other
+ * virtual base entries.
+ *
+ * If the virtual base is not found, a negative integer is returned.
+ * The magnitude of the negative integer is the number of entries in
+ * the virtual table to skip over (entries corresponding to various
+ * ancestral classes in the chain of primary bases).
+ *
+ * Important: This assumes the HP / Taligent C++ runtime
+ * conventions. Use baseclass_offset() instead to deal with g++
+ * conventions.  */
+
+void
+find_rt_vbase_offset(type, basetype, valaddr, offset, boffset_p, skip_p)
+  struct type * type;
+  struct type * basetype;
+  char * valaddr;
+  int offset;
+  int * boffset_p;
+  int * skip_p;
+{
+  int boffset;           /* offset of virtual base */
+  int index;             /* displacement to use in virtual table */
+  int skip;
+  
+  value_ptr vp;      
+  CORE_ADDR vtbl;      /* the virtual table pointer */
+  struct type * pbc;   /* the primary base class */
+
+  /* Look for the virtual base recursively in the primary base, first.
+   * This is because the derived class object and its primary base
+   * subobject share the primary virtual table.  */
+  
+  boffset = 0;
+  pbc = TYPE_PRIMARY_BASE(type);
+  if (pbc)
+    {
+      find_rt_vbase_offset (pbc, basetype, valaddr, offset, &boffset, &skip);
+      if (skip < 0)
+        {
+          *boffset_p = boffset;
+          *skip_p = -1;
+          return;
+        }
+    }
+  else
+    skip = 0;
+
+
+  /* Find the index of the virtual base according to HP/Taligent
+     runtime spec. (Depth-first, left-to-right.)  */
+  index = virtual_base_index_skip_primaries (basetype, type);
+
+  if (index < 0) {
+    *skip_p = skip + virtual_base_list_length_skip_primaries (type);
+    *boffset_p = 0;
+    return;
+  }
+
+  /* pai: FIXME -- 32x64 possible problem */ 
+  /* First word (4 bytes) in object layout is the vtable pointer */
+  vtbl = * (CORE_ADDR *) (valaddr + offset);
+
+  /* Before the constructor is invoked, things are usually zero'd out. */ 
+  if (vtbl == 0)
+    error ("Couldn't find virtual table -- object may not be constructed yet.");
+
+
+  /* Find virtual base's offset -- jump over entries for primary base
+   * ancestors, then use the index computed above.  But also adjust by
+   * HP_ACC_VBASE_START for the vtable slots before the start of the
+   * virtual base entries.  Offset is negative -- virtual base entries
+   * appear _before_ the address point of the virtual table. */
+  
+  /* pai: FIXME -- 32x64 problem, if word = 8 bytes, change multiplier 
+     & use long type */ 
+
+  /* epstein : FIXME -- added param for overlay section. May not be correct */
+   vp = value_at (builtin_type_int, vtbl + 4 * (- skip - index - HP_ACC_VBASE_START), NULL);
+  boffset = value_as_long (vp);
+  *skip_p = -1;
+  *boffset_p = boffset;
+  return;
+}
+
+
+/* Helper function used by value_struct_elt to recurse through baseclasses.
+   Look for a field NAME in ARG1. Adjust the address of ARG1 by OFFSET bytes,
+   and search in it assuming it has (class) type TYPE.
+   If found, return value, else if name matched and args not return (value)-1,
+   else return NULL. */
+
+static value_ptr
+search_struct_method (name, arg1p, args, offset, static_memfuncp, type)
+     char *name;
+     register value_ptr *arg1p, *args;
+     int offset, *static_memfuncp;
+     register struct type *type;
+{
+  int i;
+  value_ptr v;
+  int name_matched = 0;
+  char dem_opname[64];
+
+  CHECK_TYPEDEF (type);
+  for (i = TYPE_NFN_FIELDS (type) - 1; i >= 0; i--)
+    {
+      char *t_field_name = TYPE_FN_FIELDLIST_NAME (type, i);
+      /* FIXME!  May need to check for ARM demangling here */
+      if (strncmp(t_field_name, "__", 2)==0 ||
+	strncmp(t_field_name, "op", 2)==0 ||
+	strncmp(t_field_name, "type", 4)==0 )
+	{
+	  if (cplus_demangle_opname(t_field_name, dem_opname, DMGL_ANSI))
+	    t_field_name = dem_opname;
+	  else if (cplus_demangle_opname(t_field_name, dem_opname, 0))
+	    t_field_name = dem_opname; 
+	}
+      if (t_field_name && STREQ (t_field_name, name))
+	{
+	  int j = TYPE_FN_FIELDLIST_LENGTH (type, i) - 1;
+	  struct fn_field *f = TYPE_FN_FIELDLIST1 (type, i);
+ 	  name_matched = 1; 
+
+	  if (j > 0 && args == 0)
+	    error ("cannot resolve overloaded method `%s': no arguments supplied", name);
+	  while (j >= 0)
+	    {
+	      if (TYPE_FN_FIELD_STUB (f, j))
+		check_stub_method (type, i, j);
+	      if (!typecmp (TYPE_FN_FIELD_STATIC_P (f, j),
+			    TYPE_FN_FIELD_ARGS (f, j), args))
+		{
+		  if (TYPE_FN_FIELD_VIRTUAL_P (f, j))
+		    return value_virtual_fn_field (arg1p, f, j, type, offset);
+		  if (TYPE_FN_FIELD_STATIC_P (f, j) && static_memfuncp)
+		    *static_memfuncp = 1;
+		  v = value_fn_field (arg1p, f, j, type, offset);
+		  if (v != NULL) return v;
+		}
+	      j--;
+	    }
+	}
+    }
+
+  for (i = TYPE_N_BASECLASSES (type) - 1; i >= 0; i--)
+    {
+      int base_offset;
+
+      if (BASETYPE_VIA_VIRTUAL (type, i))
+	{
+         if (TYPE_HAS_VTABLE (type))
+            {
+              /* HP aCC compiled type, search for virtual base offset
+                 according to HP/Taligent runtime spec.  */
+              int skip;
+              find_rt_vbase_offset (type, TYPE_BASECLASS (type, i),
+                                    VALUE_CONTENTS_ALL (*arg1p),
+                                    offset + VALUE_EMBEDDED_OFFSET (*arg1p),
+                                    &base_offset, &skip);
+              if (skip >= 0)
+                error ("Virtual base class offset not found in vtable");
+            }
+         else
+           {
+             struct type *baseclass = check_typedef (TYPE_BASECLASS (type, i));
+	     char *base_valaddr;
+
+	     /* The virtual base class pointer might have been clobbered by the
+	        user program. Make sure that it still points to a valid memory
+	        location.  */
+
+	     if (offset < 0 || offset >= TYPE_LENGTH (type))
+	       {
+	         base_valaddr = (char *) alloca (TYPE_LENGTH (baseclass));
+	         if (target_read_memory (VALUE_ADDRESS (*arg1p)
+			 		 + VALUE_OFFSET (*arg1p) + offset,
+				         base_valaddr,
+				         TYPE_LENGTH (baseclass)) != 0)
+		   error ("virtual baseclass botch");
+	       }
+	    else
+	       base_valaddr = VALUE_CONTENTS (*arg1p) + offset;
+
+	    base_offset =
+	       baseclass_offset (type, i, base_valaddr,
+			         VALUE_ADDRESS (*arg1p)
+				   + VALUE_OFFSET (*arg1p) + offset);
+	    if (base_offset == -1)
+	       error ("virtual baseclass botch");
+	   }
+        }
+      else
+	{
+	  base_offset = TYPE_BASECLASS_BITPOS (type, i) / 8;
+        }
+      v = search_struct_method (name, arg1p, args, base_offset + offset,
+				static_memfuncp, TYPE_BASECLASS (type, i));
+      if (v == (value_ptr) -1)
+	{
+	  name_matched = 1;
+	}
+      else if (v)
+	{
+/* FIXME-bothner:  Why is this commented out?  Why is it here?  */
+/*	  *arg1p = arg1_tmp;*/
+	  return v;
+        }
+    }
+  if (name_matched) return (value_ptr) -1;
+  else return NULL;
+}
+
+/* Given *ARGP, a value of type (pointer to a)* structure/union,
+   extract the component named NAME from the ultimate target structure/union
+   and return it as a value with its appropriate type.
+   ERR is used in the error message if *ARGP's type is wrong.
+
+   C++: ARGS is a list of argument types to aid in the selection of
+   an appropriate method. Also, handle derived types.
+
+   STATIC_MEMFUNCP, if non-NULL, points to a caller-supplied location
+   where the truthvalue of whether the function that was resolved was
+   a static member function or not is stored.
+
+   ERR is an error message to be printed in case the field is not found.  */
+
+value_ptr
+value_struct_elt (argp, args, name, static_memfuncp, err)
+     register value_ptr *argp, *args;
+     char *name;
+     int *static_memfuncp;
+     char *err;
+{
+  register struct type *t;
+  value_ptr v;
+
+  COERCE_ARRAY (*argp);
+
+  t = check_typedef (VALUE_TYPE (*argp));
+
+  /* Follow pointers until we get to a non-pointer.  */
+
+  while (TYPE_CODE (t) == TYPE_CODE_PTR || TYPE_CODE (t) == TYPE_CODE_REF)
+    {
+      *argp = value_ind (*argp);
+      /* Don't coerce fn pointer to fn and then back again!  */
+      if (TYPE_CODE (VALUE_TYPE (*argp)) != TYPE_CODE_FUNC)
+	COERCE_ARRAY (*argp);
+      t = check_typedef (VALUE_TYPE (*argp));
+    }
+
+  if (TYPE_CODE (t) == TYPE_CODE_MEMBER)
+    error ("not implemented: member type in value_struct_elt");
+
+  if (   TYPE_CODE (t) != TYPE_CODE_STRUCT
+      && TYPE_CODE (t) != TYPE_CODE_UNION)
+    error ("Attempt to extract a component of a value that is not a %s.", err);
+
+  /* Assume it's not, unless we see that it is.  */
+  if (static_memfuncp)
+    *static_memfuncp =0;
+
+  if (!args)
+    {
+      /* if there are no arguments ...do this...  */
+
+      /* Try as a field first, because if we succeed, there
+	 is less work to be done.  */
+      v = search_struct_field (name, *argp, 0, t, 0);
+      if (v)
+	return v;
+
+      /* C++: If it was not found as a data field, then try to
+         return it as a pointer to a method.  */
+
+      if (destructor_name_p (name, t))
+	error ("Cannot get value of destructor");
+
+      v = search_struct_method (name, argp, args, 0, static_memfuncp, t);
+
+      if (v == (value_ptr) -1)
+	error ("Cannot take address of a method");
+      else if (v == 0)
+	{
+	  if (TYPE_NFN_FIELDS (t))
+	    error ("There is no member or method named %s.", name);
+	  else
+	    error ("There is no member named %s.", name);
+	}
+      return v;
+    }
+
+  if (destructor_name_p (name, t))
+    {
+      if (!args[1])
+	{
+	  /* Destructors are a special case.  */
+	  int m_index, f_index;
+
+	  v = NULL;
+	  if (get_destructor_fn_field (t, &m_index, &f_index))
+	    {
+	      v = value_fn_field (NULL, TYPE_FN_FIELDLIST1 (t, m_index),
+				  f_index, NULL, 0);
+	    }
+	  if (v == NULL)
+	    error ("could not find destructor function named %s.", name);
+	  else
+	    return v;
+	}
+      else
+	{
+	  error ("destructor should not have any argument");
+	}
+    }
+  else
+    v = search_struct_method (name, argp, args, 0, static_memfuncp, t);
+
+  if (v == (value_ptr) -1)
+    {
+	error("Argument list of %s mismatch with component in the structure.", name);
+    }
+  else if (v == 0)
+    {
+      /* See if user tried to invoke data as function.  If so,
+	 hand it back.  If it's not callable (i.e., a pointer to function),
+	 gdb should give an error.  */
+      v = search_struct_field (name, *argp, 0, t, 0);
+    }
+
+  if (!v)
+    error ("Structure has no component named %s.", name);
+  return v;
+}
+
+/* Search through the methods of an object (and its bases)
+ * to find a specified method. Return the pointer to the
+ * fn_field list of overloaded instances.
+ * Helper function for value_find_oload_list.
+ * ARGP is a pointer to a pointer to a value (the object)
+ * METHOD is a string containing the method name
+ * OFFSET is the offset within the value
+ * STATIC_MEMFUNCP is set if the method is static
+ * TYPE is the assumed type of the object
+ * NUM_FNS is the number of overloaded instances
+ * BASETYPE is set to the actual type of the subobject where the method is found
+ * BOFFSET is the offset of the base subobject where the method is found */
+
+struct fn_field *
+find_method_list (argp, method, offset, static_memfuncp, type, num_fns, basetype, boffset)
+  value_ptr *argp;
+  char * method;
+  int offset;
+  int * static_memfuncp;
+  struct type * type;
+  int * num_fns;
+  struct type ** basetype;
+  int * boffset;
+{
+  int i;
+  struct fn_field * f;
+  CHECK_TYPEDEF (type);
+
+  *num_fns = 0;
+
+  /* First check in object itself */ 
+  for (i = TYPE_NFN_FIELDS (type) -1; i >= 0; i--)
+    {
+      /* pai: FIXME What about operators and type conversions? */
+      char * fn_field_name = TYPE_FN_FIELDLIST_NAME (type, i);
+      if (fn_field_name && STREQ (fn_field_name, method))
+        {
+          *num_fns = TYPE_FN_FIELDLIST_LENGTH (type, i);
+          *basetype = type;
+          *boffset = offset;
+          return TYPE_FN_FIELDLIST1 (type, i);
+        }
+    }
+  
+  /* Not found in object, check in base subobjects */
+  for (i = TYPE_N_BASECLASSES (type) - 1; i >= 0; i--)
+    {
+      int base_offset;
+      if (BASETYPE_VIA_VIRTUAL (type, i))
+	{
+          if (TYPE_HAS_VTABLE (type))
+            {
+              /* HP aCC compiled type, search for virtual base offset
+               * according to HP/Taligent runtime spec.  */
+              int skip;
+              find_rt_vbase_offset (type, TYPE_BASECLASS (type, i),
+                                    VALUE_CONTENTS_ALL (*argp),
+                                    offset + VALUE_EMBEDDED_OFFSET (*argp),
+                                    &base_offset, &skip);
+              if (skip >= 0)
+                error ("Virtual base class offset not found in vtable");
+            }
+          else
+            {
+              /* probably g++ runtime model */ 
+              base_offset = VALUE_OFFSET (*argp) + offset;
+              base_offset =
+                baseclass_offset (type, i,
+                                  VALUE_CONTENTS (*argp) + base_offset,
+                                  VALUE_ADDRESS (*argp) + base_offset);
+              if (base_offset == -1)
+                error ("virtual baseclass botch");
+            }
+        }
+      else /* non-virtual base, simply use bit position from debug info */
+	{
+	  base_offset = TYPE_BASECLASS_BITPOS (type, i) / 8;
+        }
+      f = find_method_list (argp, method, base_offset + offset,
+                            static_memfuncp, TYPE_BASECLASS (type, i), num_fns, basetype, boffset);
+      if (f)
+        return f;
+    }
+  return NULL;  
+}
+
+/* Return the list of overloaded methods of a specified name.
+ * ARGP is a pointer to a pointer to a value (the object)
+ * METHOD is the method name
+ * OFFSET is the offset within the value contents
+ * STATIC_MEMFUNCP is set if the method is static
+ * NUM_FNS is the number of overloaded instances
+ * BASETYPE is set to the type of the base subobject that defines the method
+ * BOFFSET is the offset of the base subobject which defines the method */
+
+struct fn_field *
+value_find_oload_method_list (argp, method, offset, static_memfuncp, num_fns, basetype, boffset)
+  value_ptr *argp;
+  char * method;
+  int offset;
+  int * static_memfuncp;
+  int * num_fns;
+  struct type ** basetype;
+  int * boffset;
+{
+  struct type * t;
+  value_ptr v;
+
+  t = check_typedef (VALUE_TYPE (*argp));
+
+  /* code snarfed from value_struct_elt */ 
+  while (TYPE_CODE (t) == TYPE_CODE_PTR || TYPE_CODE (t) == TYPE_CODE_REF)
+    {
+      *argp = value_ind (*argp);
+      /* Don't coerce fn pointer to fn and then back again!  */
+      if (TYPE_CODE (VALUE_TYPE (*argp)) != TYPE_CODE_FUNC)
+	COERCE_ARRAY (*argp);
+      t = check_typedef (VALUE_TYPE (*argp));
+    }
+  
+  if (TYPE_CODE (t) == TYPE_CODE_MEMBER)
+    error ("Not implemented: member type in value_find_oload_lis");
+  
+  if (   TYPE_CODE (t) != TYPE_CODE_STRUCT
+         && TYPE_CODE (t) != TYPE_CODE_UNION)
+    error ("Attempt to extract a component of a value that is not a struct or union");
+  
+  /* Assume it's not static, unless we see that it is.  */
+  if (static_memfuncp)
+    *static_memfuncp =0;
+
+  return find_method_list (argp, method, 0, static_memfuncp, t, num_fns, basetype, boffset);
+  
+}
+
+/* Given an array of argument types (ARGTYPES) (which includes an
+   entry for "this" in the case of C++ methods), the number of
+   arguments NARGS, the NAME of a function whether it's a method or
+   not (METHOD), and the degree of laxness (LAX) in conforming to
+   overload resolution rules in ANSI C++, find the best function that
+   matches on the argument types according to the overload resolution
+   rules.
+
+   In the case of class methods, the parameter OBJ is an object value
+   in which to search for overloaded methods.
+
+   In the case of non-method functions, the parameter FSYM is a symbol
+   corresponding to one of the overloaded functions.
+
+   Return value is an integer: 0 -> good match, 10 -> debugger applied
+   non-standard coercions, 100 -> incompatible.
+
+   If a method is being searched for, VALP will hold the value.
+   If a non-method is being searched for, SYMP will hold the symbol for it.
+
+   If a method is being searched for, and it is a static method,
+   then STATICP will point to a non-zero value.
+
+   Note: This function does *not* check the value of
+   overload_resolution.  Caller must check it to see whether overload
+   resolution is permitted.
+   */
+
+int
+find_overload_match (arg_types, nargs, name, method, lax, obj, fsym, valp, symp, staticp)
+  struct type ** arg_types;
+  int nargs;
+  char * name;
+  int method;
+  int lax;
+  value_ptr obj;
+  struct symbol * fsym;
+  value_ptr * valp;
+  struct symbol ** symp;
+  int * staticp;
+{
+  int nparms;
+  struct type ** parm_types;
+  int champ_nparms = 0;
+  
+  short oload_champ = -1;          /* Index of best overloaded function */
+  short oload_ambiguous = 0;       /* Current ambiguity state for overload resolution */
+                                   /* 0 => no ambiguity, 1 => two good funcs, 2 => incomparable funcs */
+  short oload_ambig_champ = -1;    /* 2nd contender for best match */ 
+  short oload_non_standard = 0;    /* did we have to use non-standard conversions? */ 
+  short oload_incompatible = 0;    /* are args supplied incompatible with any function? */
+  
+  struct badness_vector * bv;      /* A measure of how good an overloaded instance is */ 
+  struct badness_vector * oload_champ_bv = NULL; /* The measure for the current best match */ 
+  
+  value_ptr temp = obj;
+  struct fn_field * fns_ptr = NULL;   /* For methods, the list of overloaded methods */ 
+  struct symbol ** oload_syms = NULL; /* For non-methods, the list of overloaded function symbols */
+  int num_fns = 0;                    /* Number of overloaded instances being considered */ 
+  struct type * basetype = NULL;   
+  int boffset;
+  register int jj;
+  register int ix;
+
+  char * obj_type_name = NULL;
+  char * func_name = NULL;
+
+  /* Get the list of overloaded methods or functions */
+  if (method)
+    {
+      obj_type_name = TYPE_NAME (VALUE_TYPE (obj));
+      /* Hack: evaluate_subexp_standard often passes in a pointer
+         value rather than the object itself, so try again */
+      if ((!obj_type_name || !*obj_type_name) &&
+          (TYPE_CODE (VALUE_TYPE (obj)) == TYPE_CODE_PTR))
+        obj_type_name = TYPE_NAME (TYPE_TARGET_TYPE (VALUE_TYPE (obj)));
+
+      fns_ptr = value_find_oload_method_list (&temp, name, 0,
+                                              staticp,
+                                              &num_fns,
+                                              &basetype, &boffset);
+      if (!fns_ptr || !num_fns)
+        error ("Couldn't find method %s%s%s",
+               obj_type_name,
+               (obj_type_name && *obj_type_name) ? "::" : "",
+               name);
+    }
+  else
+    {
+      int i = -1;
+      func_name = cplus_demangle (SYMBOL_NAME (fsym), DMGL_NO_OPTS);
+
+      oload_syms = make_symbol_overload_list (fsym);
+      while (oload_syms[++i])
+        num_fns++;
+      if (!num_fns)
+        error ("Couldn't find function %s", func_name);
+    }
+  
+  oload_champ_bv = NULL;
+
+  /* Consider each candidate in turn */ 
+  for (ix = 0; ix < num_fns; ix++)
+    {
+      int jj;
+
+      /* Number of parameters for current candidate */ 
+      nparms = method ? TYPE_NFIELDS (fns_ptr[ix].type)
+                      : TYPE_NFIELDS (SYMBOL_TYPE (oload_syms[ix]));
+
+      /* Prepare array of parameter types */ 
+      parm_types = (struct type **) xmalloc (nparms * (sizeof (struct type *)));
+      for (jj = 0; jj < nparms; jj++)
+        parm_types[jj] = method ? TYPE_FIELD_TYPE (fns_ptr[ix].type, jj)
+                                : TYPE_FIELD_TYPE (SYMBOL_TYPE (oload_syms[ix]), jj);
+
+      /* Compare parameter types to supplied argument types */
+      bv = rank_function (parm_types, nparms, arg_types, nargs);
+      
+      if (!oload_champ_bv)
+        {
+          oload_champ_bv = bv;
+          oload_champ = 0;
+          champ_nparms = nparms;
+        }
+      else
+        /* See whether current candidate is better or worse than previous best */ 
+        switch (compare_badness (bv, oload_champ_bv))
+          {
+            case 0:
+              oload_ambiguous = 1;    /* top two contenders are equally good */ 
+              oload_ambig_champ = ix;
+              break;
+            case 1:
+              oload_ambiguous = 2;    /* incomparable top contenders */ 
+              oload_ambig_champ = ix;
+              break;
+            case 2:
+              oload_champ_bv = bv;    /* new champion, record details */ 
+              oload_ambiguous = 0;
+              oload_champ = ix;
+              oload_ambig_champ = -1;
+              champ_nparms = nparms;
+              break;
+            case 3:
+            default:
+              break;
+          }
+      free (parm_types);
+#ifdef DEBUG_OLOAD
+      if (method)
+        printf("Overloaded method instance %s, # of parms %d\n", fns_ptr[ix].physname, nparms);
+      else
+        printf("Overloaded function instance %s # of parms %d\n", SYMBOL_DEMANGLED_NAME(oload_syms[ix]),nparms); 
+      for (jj = 0; jj <= nargs; jj++)
+        printf("...Badness @ %d : %d\n", jj, bv->rank[jj]);
+      printf("Overload resolution champion is %d, ambiguous? %d\n", oload_champ, oload_ambiguous);
+#endif
+    } /* end loop over all candidates */ 
+
+  if (oload_ambiguous)
+    {
+      if (method)
+        error ("Cannot resolve overloaded method %s%s%s to unique instance; disambiguate by specifying function signature",
+               obj_type_name,
+               (obj_type_name && *obj_type_name) ? "::" : "",
+               name);
+      else
+        error ("Cannot resolve overloaded function %s to unique instance; disambiguate by specifying function signature",
+               func_name);
+    }
+
+  /* Check how bad the best match is */ 
+  for (ix = 1; ix <= nargs; ix++)
+    {
+      switch (oload_champ_bv->rank[ix])
+        {
+          case 10:
+            oload_non_standard = 1;  /* non-standard type conversions needed */ 
+            break;
+          case 100:
+            oload_incompatible = 1;  /* truly mismatched types */ 
+            break;
+        }
+    }
+  if (oload_incompatible)
+    {
+      if (method)
+        error ("Cannot resolve method %s%s%s to any overloaded instance",
+               obj_type_name,
+               (obj_type_name && *obj_type_name) ? "::" : "",
+               name);
+      else
+        error ("Cannot resolve function %s to any overloaded instance",
+               func_name);
+    }
+  else if (oload_non_standard)
+    {
+      if (method)
+        warning ("Using non-standard conversion to match method %s%s%s to supplied arguments",
+                 obj_type_name,
+                 (obj_type_name && *obj_type_name) ? "::" : "",
+                 name);
+      else
+        warning ("Using non-standard conversion to match function %s to supplied arguments",
+                 func_name);
+    }
+
+  if (method)
+    {
+      if (TYPE_FN_FIELD_VIRTUAL_P (fns_ptr, oload_champ))
+        *valp = value_virtual_fn_field (&temp, fns_ptr, oload_champ, basetype, boffset);
+      else
+        *valp = value_fn_field (&temp, fns_ptr, oload_champ, basetype, boffset);
+    }
+  else
+    {
+      *symp = oload_syms[oload_champ];
+      free (func_name);
+    }
+
+  return oload_incompatible ? 100 : (oload_non_standard ? 10 : 0);
+}
+
+/* C++: return 1 is NAME is a legitimate name for the destructor
+   of type TYPE.  If TYPE does not have a destructor, or
+   if NAME is inappropriate for TYPE, an error is signaled.  */
+int
+destructor_name_p (name, type)
+     const char *name;
+     const struct type *type;
+{
+  /* destructors are a special case.  */
+
+  if (name[0] == '~')
+    {
+      char *dname = type_name_no_tag (type);
+      char *cp = strchr (dname, '<');
+      unsigned int len;
+
+      /* Do not compare the template part for template classes.  */
+      if (cp == NULL)
+	len = strlen (dname);
+      else
+	len = cp - dname;
+      if (strlen (name + 1) != len || !STREQN (dname, name + 1, len))
+	error ("name of destructor must equal name of class");
+      else
+	return 1;
+    }
+  return 0;
+}
+
+/* Helper function for check_field: Given TYPE, a structure/union,
+   return 1 if the component named NAME from the ultimate
+   target structure/union is defined, otherwise, return 0. */
+
+static int
+check_field_in (type, name)
+     register struct type *type;
+     const char *name;
+{
+  register int i;
+
+  for (i = TYPE_NFIELDS (type) - 1; i >= TYPE_N_BASECLASSES (type); i--)
+    {
+      char *t_field_name = TYPE_FIELD_NAME (type, i);
+      if (t_field_name && STREQ (t_field_name, name))
+	return 1;
+    }
+
+  /* C++: If it was not found as a data field, then try to
+     return it as a pointer to a method.  */
+
+  /* Destructors are a special case.  */
+  if (destructor_name_p (name, type))
+    {
+      int m_index, f_index;
+
+      return get_destructor_fn_field (type, &m_index, &f_index);
+    }
+
+  for (i = TYPE_NFN_FIELDS (type) - 1; i >= 0; --i)
+    {
+      if (STREQ (TYPE_FN_FIELDLIST_NAME (type, i), name))
+	return 1;
+    }
+
+  for (i = TYPE_N_BASECLASSES (type) - 1; i >= 0; i--)
+    if (check_field_in (TYPE_BASECLASS (type, i), name))
+      return 1;
+      
+  return 0;
+}
+
+
+/* C++: Given ARG1, a value of type (pointer to a)* structure/union,
+   return 1 if the component named NAME from the ultimate
+   target structure/union is defined, otherwise, return 0.  */
+
+int
+check_field (arg1, name)
+     register value_ptr arg1;
+     const char *name;
+{
+  register struct type *t;
+
+  COERCE_ARRAY (arg1);
+
+  t = VALUE_TYPE (arg1);
+
+  /* Follow pointers until we get to a non-pointer.  */
+
+  for (;;)
+    {
+      CHECK_TYPEDEF (t);
+      if (TYPE_CODE (t) != TYPE_CODE_PTR && TYPE_CODE (t) != TYPE_CODE_REF)
+	break;
+      t = TYPE_TARGET_TYPE (t);
+    }
+
+  if (TYPE_CODE (t) == TYPE_CODE_MEMBER)
+    error ("not implemented: member type in check_field");
+
+  if (   TYPE_CODE (t) != TYPE_CODE_STRUCT
+      && TYPE_CODE (t) != TYPE_CODE_UNION)
+    error ("Internal error: `this' is not an aggregate");
+
+  return check_field_in (t, name);
+}
+
+/* C++: Given an aggregate type CURTYPE, and a member name NAME,
+   return the address of this member as a "pointer to member"
+   type.  If INTYPE is non-null, then it will be the type
+   of the member we are looking for.  This will help us resolve
+   "pointers to member functions".  This function is used
+   to resolve user expressions of the form "DOMAIN::NAME".  */
+
+value_ptr
+value_struct_elt_for_reference (domain, offset, curtype, name, intype)
+     struct type *domain, *curtype, *intype;
+     int offset;
+     char *name;
+{
+  register struct type *t = curtype;
+  register int i;
+  value_ptr v;
+
+  if (   TYPE_CODE (t) != TYPE_CODE_STRUCT
+      && TYPE_CODE (t) != TYPE_CODE_UNION)
+    error ("Internal error: non-aggregate type to value_struct_elt_for_reference");
+
+  for (i = TYPE_NFIELDS (t) - 1; i >= TYPE_N_BASECLASSES (t); i--)
+    {
+      char *t_field_name = TYPE_FIELD_NAME (t, i);
+      
+      if (t_field_name && STREQ (t_field_name, name))
+	{
+	  if (TYPE_FIELD_STATIC (t, i))
+	    {
+	      v = value_static_field (t, i);
+	      if (v == NULL)
+		error ("Internal error: could not find static variable %s",
+		       name);
+	      return v;
+	    }
+	  if (TYPE_FIELD_PACKED (t, i))
+	    error ("pointers to bitfield members not allowed");
+	  
+	  return value_from_longest
+	    (lookup_reference_type (lookup_member_type (TYPE_FIELD_TYPE (t, i),
+							domain)),
+	     offset + (LONGEST) (TYPE_FIELD_BITPOS (t, i) >> 3));
+	}
+    }
+
+  /* C++: If it was not found as a data field, then try to
+     return it as a pointer to a method.  */
+
+  /* Destructors are a special case.  */
+  if (destructor_name_p (name, t))
+    {
+      error ("member pointers to destructors not implemented yet");
+    }
+
+  /* Perform all necessary dereferencing.  */
+  while (intype && TYPE_CODE (intype) == TYPE_CODE_PTR)
+    intype = TYPE_TARGET_TYPE (intype);
+
+  for (i = TYPE_NFN_FIELDS (t) - 1; i >= 0; --i)
+    {
+      char *t_field_name = TYPE_FN_FIELDLIST_NAME (t, i);
+      char dem_opname[64];
+
+      if (strncmp(t_field_name, "__", 2)==0 ||
+	strncmp(t_field_name, "op", 2)==0 ||
+	strncmp(t_field_name, "type", 4)==0 )
+	{
+	  if (cplus_demangle_opname(t_field_name, dem_opname, DMGL_ANSI))
+	    t_field_name = dem_opname;
+	  else if (cplus_demangle_opname(t_field_name, dem_opname, 0))
+	    t_field_name = dem_opname; 
+	}
+      if (t_field_name && STREQ (t_field_name, name))
+	{
+	  int j = TYPE_FN_FIELDLIST_LENGTH (t, i);
+	  struct fn_field *f = TYPE_FN_FIELDLIST1 (t, i);
+	  
+	  if (intype == 0 && j > 1)
+	    error ("non-unique member `%s' requires type instantiation", name);
+	  if (intype)
+	    {
+	      while (j--)
+		if (TYPE_FN_FIELD_TYPE (f, j) == intype)
+		  break;
+	      if (j < 0)
+		error ("no member function matches that type instantiation");
+	    }
+	  else
+	    j = 0;
+	  
+	  if (TYPE_FN_FIELD_STUB (f, j))
+	    check_stub_method (t, i, j);
+	  if (TYPE_FN_FIELD_VIRTUAL_P (f, j))
+	    {
+	      return value_from_longest
+		(lookup_reference_type
+		 (lookup_member_type (TYPE_FN_FIELD_TYPE (f, j),
+				      domain)),
+		 (LONGEST) METHOD_PTR_FROM_VOFFSET (TYPE_FN_FIELD_VOFFSET (f, j)));
+	    }
+	  else
+	    {
+	      struct symbol *s = lookup_symbol (TYPE_FN_FIELD_PHYSNAME (f, j),
+						0, VAR_NAMESPACE, 0, NULL);
+	      if (s == NULL)
+		{
+		  v = 0;
+		}
+	      else
+		{
+		  v = read_var_value (s, 0);
+#if 0
+		  VALUE_TYPE (v) = lookup_reference_type
+		    (lookup_member_type (TYPE_FN_FIELD_TYPE (f, j),
+					 domain));
+#endif
+		}
+	      return v;
+	    }
+	}
+    }
+  for (i = TYPE_N_BASECLASSES (t) - 1; i >= 0; i--)
+    {
+      value_ptr v;
+      int base_offset;
+
+      if (BASETYPE_VIA_VIRTUAL (t, i))
+	base_offset = 0;
+      else
+	base_offset = TYPE_BASECLASS_BITPOS (t, i) / 8;
+      v = value_struct_elt_for_reference (domain,
+					  offset + base_offset,
+					  TYPE_BASECLASS (t, i),
+					  name,
+					  intype);
+      if (v)
+	return v;
+    }
+  return 0;
+}
+
+
+/* Find the real run-time type of a value using RTTI.
+ * V is a pointer to the value.
+ * A pointer to the struct type entry of the run-time type
+ * is returneed.
+ * FULL is a flag that is set only if the value V includes
+ * the entire contents of an object of the RTTI type.
+ * TOP is the offset to the top of the enclosing object of
+ * the real run-time type.  This offset may be for the embedded
+ * object, or for the enclosing object of V.
+ * USING_ENC is the flag that distinguishes the two cases.
+ * If it is 1, then the offset is for the enclosing object,
+ * otherwise for the embedded object.
+ * 
+ * This currently works only for RTTI information generated
+ * by the HP ANSI C++ compiler (aCC).  g++ today (1997-06-10)
+ * does not appear to support RTTI. This function returns a
+ * NULL value for objects in the g++ runtime model. */
+
+struct type *
+value_rtti_type (v, full, top, using_enc)
+  value_ptr v;
+  int * full;
+  int * top;
+  int * using_enc;
+{
+  struct type * known_type;
+  struct type * rtti_type;
+  CORE_ADDR coreptr;
+  value_ptr vp;
+  int using_enclosing = 0;
+  long top_offset = 0;
+  char rtti_type_name[256];
+
+  if (full)
+    *full = 0;
+  if (top)
+    *top = -1;
+  if (using_enc)
+    *using_enc = 0;
+
+  /* Get declared type */ 
+  known_type = VALUE_TYPE (v);
+  CHECK_TYPEDEF (known_type);
+  /* RTTI works only or class objects */ 
+  if (TYPE_CODE (known_type) != TYPE_CODE_CLASS)
+    return NULL;
+
+  /* If neither the declared type nor the enclosing type of the
+   * value structure has a HP ANSI C++ style virtual table,
+   * we can't do anything. */
+  if (!TYPE_HAS_VTABLE (known_type))
+    {
+      known_type = VALUE_ENCLOSING_TYPE (v);
+      CHECK_TYPEDEF (known_type);
+      if ((TYPE_CODE (known_type) != TYPE_CODE_CLASS) ||
+          !TYPE_HAS_VTABLE (known_type))
+        return NULL; /* No RTTI, or not HP-compiled types */
+      CHECK_TYPEDEF (known_type);
+      using_enclosing = 1;
+    }
+
+  if (using_enclosing && using_enc)
+    *using_enc = 1;
+
+  /* First get the virtual table address */
+  coreptr = * (CORE_ADDR *) ((VALUE_CONTENTS_ALL (v))
+                             + VALUE_OFFSET (v) 
+                             + (using_enclosing ? 0 : VALUE_EMBEDDED_OFFSET (v)));
+  if (coreptr == 0)
+    return NULL; /* return silently -- maybe called on gdb-generated value */
+
+  /* Fetch the top offset of the object */ 
+  /* FIXME possible 32x64 problem with pointer size & arithmetic */
+  vp = value_at (builtin_type_int, 
+                 coreptr + 4 * HP_ACC_TOP_OFFSET_OFFSET, 
+                 VALUE_BFD_SECTION (v));
+  top_offset = value_as_long (vp);
+  if (top)
+    *top = top_offset;
+
+  /* Fetch the typeinfo pointer */
+  /* FIXME possible 32x64 problem with pointer size & arithmetic */
+  vp = value_at (builtin_type_int, coreptr + 4 * HP_ACC_TYPEINFO_OFFSET, VALUE_BFD_SECTION (v));
+  /* Indirect through the typeinfo pointer and retrieve the pointer
+   * to the string name */
+  coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (vp));
+  if (!coreptr)
+    error ("Retrieved null typeinfo pointer in trying to determine run-time type");
+  vp = value_at (builtin_type_int, coreptr + 4, VALUE_BFD_SECTION (v));  /* 4 -> offset of name field */
+                                                  /* FIXME possible 32x64 problem */
+
+  coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (vp));
+
+  read_memory_string (coreptr, rtti_type_name, 256);
+
+  if (strlen (rtti_type_name) == 0)
+    error ("Retrieved null type name from typeinfo");
+  
+  /* search for type */
+  rtti_type = lookup_typename (rtti_type_name, (struct block *) 0, 1);
+  
+  if (!rtti_type)
+    error ("Could not find run-time type: invalid type name %s in typeinfo??", rtti_type_name);
+  CHECK_TYPEDEF (rtti_type);
+
+#if 0 /* debugging*/
+  printf("RTTI type name %s, tag %s, full? %d\n", TYPE_NAME (rtti_type), TYPE_TAG_NAME (rtti_type), full ? *full : -1); 
+#endif
+
+  /* Check whether we have the entire object */
+  if (full /* Non-null pointer passed */ 
+
+      &&
+           /* Either we checked on the whole object in hand and found the
+              top offset to be zero */
+      (((top_offset == 0) &&         
+       using_enclosing &&     
+       TYPE_LENGTH (known_type) == TYPE_LENGTH (rtti_type))
+      ||
+           /* Or we checked on the embedded object and top offset was the
+              same as the embedded offset */
+      ((top_offset == VALUE_EMBEDDED_OFFSET (v)) &&
+       !using_enclosing &&
+       TYPE_LENGTH (VALUE_ENCLOSING_TYPE (v)) == TYPE_LENGTH (rtti_type))))
+    
+    *full = 1;
+  
+  return rtti_type;
+}
+
+/* Given a pointer value V, find the real (RTTI) type
+   of the object it points to.
+   Other parameters FULL, TOP, USING_ENC as with value_rtti_type()
+   and refer to the values computed for the object pointed to. */
+
+struct type *
+value_rtti_target_type (v, full, top, using_enc)
+  value_ptr v;
+  int * full;
+  int * top;
+  int * using_enc;
+{
+  value_ptr target;
+
+  target = value_ind (v);
+
+  return value_rtti_type (target, full, top, using_enc);
+}
+
+/* Given a value pointed to by ARGP, check its real run-time type, and
+   if that is different from the enclosing type, create a new value
+   using the real run-time type as the enclosing type (and of the same
+   type as ARGP) and return it, with the embedded offset adjusted to
+   be the correct offset to the enclosed object
+   RTYPE is the type, and XFULL, XTOP, and XUSING_ENC are the other
+   parameters, computed by value_rtti_type(). If these are available,
+   they can be supplied and a second call to value_rtti_type() is avoided.
+   (Pass RTYPE == NULL if they're not available */
+
+value_ptr
+value_full_object (argp, rtype, xfull, xtop, xusing_enc)
+  value_ptr argp;
+  struct type * rtype;
+  int xfull;
+  int xtop;
+  int xusing_enc;
+  
+{
+  struct type * real_type;
+  int full = 0;
+  int top = -1;
+  int using_enc = 0;
+  value_ptr new_val;
+
+  if (rtype)
+    {
+      real_type = rtype;
+      full = xfull;
+      top = xtop;
+      using_enc = xusing_enc;
+    }
+  else
+    real_type = value_rtti_type (argp, &full, &top, &using_enc);
+
+  /* If no RTTI data, or if object is already complete, do nothing */
+  if (!real_type || real_type == VALUE_ENCLOSING_TYPE (argp))
+    return argp;
+
+  /* If we have the full object, but for some reason the enclosing
+     type is wrong, set it */ /* pai: FIXME -- sounds iffy */
+  if (full)
+    {
+      VALUE_ENCLOSING_TYPE (argp) = real_type;
+      return argp;
+    }
+
+  /* Check if object is in memory */
+  if (VALUE_LVAL (argp) != lval_memory)
+    {
+      warning ("Couldn't retrieve complete object of RTTI type %s; object may be in register(s).", TYPE_NAME (real_type));
+      
+      return argp;
+    }
+  
+  /* All other cases -- retrieve the complete object */
+  /* Go back by the computed top_offset from the beginning of the object,
+     adjusting for the embedded offset of argp if that's what value_rtti_type
+     used for its computation. */
+  new_val = value_at_lazy (real_type, VALUE_ADDRESS (argp) - top +
+                           (using_enc ? 0 : VALUE_EMBEDDED_OFFSET (argp)), 
+                           VALUE_BFD_SECTION (argp));
+  VALUE_TYPE (new_val) = VALUE_TYPE (argp);
+  VALUE_EMBEDDED_OFFSET (new_val) = using_enc ? top + VALUE_EMBEDDED_OFFSET (argp) : top;
+  return new_val;
+}
+
+
+
+
+/* C++: return the value of the class instance variable, if one exists.
+   Flag COMPLAIN signals an error if the request is made in an
+   inappropriate context.  */
+
+value_ptr
+value_of_this (complain)
+     int complain;
+{
+  struct symbol *func, *sym;
+  struct block *b;
+  int i;
+  static const char funny_this[] = "this";
+  value_ptr this;
+
+  if (selected_frame == 0)
+    {
+      if (complain)
+        error ("no frame selected");
+      else return 0;
+    }
+
+  func = get_frame_function (selected_frame);
+  if (!func)
+    {
+      if (complain)
+	error ("no `this' in nameless context");
+      else return 0;
+    }
+
+  b = SYMBOL_BLOCK_VALUE (func);
+  i = BLOCK_NSYMS (b);
+  if (i <= 0)
+    {
+      if (complain)
+        error ("no args, no `this'");
+      else return 0;
+    }
+
+  /* Calling lookup_block_symbol is necessary to get the LOC_REGISTER
+     symbol instead of the LOC_ARG one (if both exist).  */
+  sym = lookup_block_symbol (b, funny_this, VAR_NAMESPACE);
+  if (sym == NULL)
+    {
+      if (complain)
+	error ("current stack frame not in method");
+      else
+	return NULL;
+    }
+
+  this = read_var_value (sym, selected_frame);
+  if (this == 0 && complain)
+    error ("`this' argument at unknown address");
+  return this;
+}
+
+/* Create a slice (sub-string, sub-array) of ARRAY, that is LENGTH elements
+   long, starting at LOWBOUND.  The result has the same lower bound as
+   the original ARRAY.  */
+
+value_ptr
+value_slice (array, lowbound, length)
+     value_ptr array;
+     int lowbound, length;
+{
+  struct type *slice_range_type, *slice_type, *range_type;
+  LONGEST lowerbound, upperbound, offset;
+  value_ptr slice;
+  struct type *array_type;
+  array_type = check_typedef (VALUE_TYPE (array));
+  COERCE_VARYING_ARRAY (array, array_type);
+  if (TYPE_CODE (array_type) != TYPE_CODE_ARRAY
+      && TYPE_CODE (array_type) != TYPE_CODE_STRING
+      && TYPE_CODE (array_type) != TYPE_CODE_BITSTRING)
+    error ("cannot take slice of non-array");
+  range_type = TYPE_INDEX_TYPE (array_type);
+  if (get_discrete_bounds (range_type, &lowerbound, &upperbound) < 0)
+    error ("slice from bad array or bitstring");
+  if (lowbound < lowerbound || length < 0
+      || lowbound + length - 1 > upperbound
+      /* Chill allows zero-length strings but not arrays. */
+      || (current_language->la_language == language_chill
+	  && length == 0 && TYPE_CODE (array_type) == TYPE_CODE_ARRAY))
+    error ("slice out of range");
+  /* FIXME-type-allocation: need a way to free this type when we are
+     done with it.  */
+  slice_range_type = create_range_type ((struct type*) NULL,
+					TYPE_TARGET_TYPE (range_type),
+					lowbound, lowbound + length - 1);
+  if (TYPE_CODE (array_type) == TYPE_CODE_BITSTRING)
+    {
+      int i;
+      slice_type = create_set_type ((struct type*) NULL, slice_range_type);
+      TYPE_CODE (slice_type) = TYPE_CODE_BITSTRING;
+      slice = value_zero (slice_type, not_lval);
+      for (i = 0; i < length; i++)
+	{
+	  int element = value_bit_index (array_type,
+					 VALUE_CONTENTS (array),
+					 lowbound + i);
+	  if (element < 0)
+	    error ("internal error accessing bitstring");
+	  else if (element > 0)
+	    {
+	      int j = i % TARGET_CHAR_BIT;
+	      if (BITS_BIG_ENDIAN)
+		j = TARGET_CHAR_BIT - 1 - j;
+	      VALUE_CONTENTS_RAW (slice)[i / TARGET_CHAR_BIT] |= (1 << j);
+	    }
+	}
+      /* We should set the address, bitssize, and bitspos, so the clice
+	 can be used on the LHS, but that may require extensions to
+	 value_assign.  For now, just leave as a non_lval.  FIXME.  */
+    }
+  else
+    {
+      struct type *element_type = TYPE_TARGET_TYPE (array_type);
+      offset
+	= (lowbound - lowerbound) * TYPE_LENGTH (check_typedef (element_type));
+      slice_type = create_array_type ((struct type*) NULL, element_type,
+				      slice_range_type);
+      TYPE_CODE (slice_type) = TYPE_CODE (array_type);
+      slice = allocate_value (slice_type);
+      if (VALUE_LAZY (array))
+	VALUE_LAZY (slice) = 1;
+      else
+	memcpy (VALUE_CONTENTS (slice), VALUE_CONTENTS (array) + offset,
+		TYPE_LENGTH (slice_type));
+      if (VALUE_LVAL (array) == lval_internalvar)
+	VALUE_LVAL (slice) = lval_internalvar_component;
+      else
+	VALUE_LVAL (slice) = VALUE_LVAL (array);
+      VALUE_ADDRESS (slice) = VALUE_ADDRESS (array);
+      VALUE_OFFSET (slice) = VALUE_OFFSET (array) + offset;
+    }
+  return slice;
+}
+
+/* Assuming chill_varying_type (VARRAY) is true, return an equivalent
+   value as a fixed-length array. */
+
+value_ptr
+varying_to_slice (varray)
+     value_ptr varray;
+{
+  struct type *vtype = check_typedef (VALUE_TYPE (varray));
+  LONGEST length = unpack_long (TYPE_FIELD_TYPE (vtype, 0),
+				VALUE_CONTENTS (varray)
+				+ TYPE_FIELD_BITPOS (vtype, 0) / 8);
+  return value_slice (value_primitive_field (varray, 0, 1, vtype), 0, length);
+}
+
+/* Create a value for a FORTRAN complex number.  Currently most of 
+   the time values are coerced to COMPLEX*16 (i.e. a complex number 
+   composed of 2 doubles.  This really should be a smarter routine 
+   that figures out precision inteligently as opposed to assuming 
+   doubles. FIXME: fmb */ 
+
+value_ptr
+value_literal_complex (arg1, arg2, type)
+     value_ptr arg1;
+     value_ptr arg2;
+     struct type *type;
+{
+  register value_ptr val;
+  struct type *real_type = TYPE_TARGET_TYPE (type);
+
+  val = allocate_value (type);
+  arg1 = value_cast (real_type, arg1);
+  arg2 = value_cast (real_type, arg2);
+
+  memcpy (VALUE_CONTENTS_RAW (val),
+	  VALUE_CONTENTS (arg1), TYPE_LENGTH (real_type));
+  memcpy (VALUE_CONTENTS_RAW (val) + TYPE_LENGTH (real_type),
+	  VALUE_CONTENTS (arg2), TYPE_LENGTH (real_type));
+  return val;
+}
+
+/* Cast a value into the appropriate complex data type. */
+
+static value_ptr
+cast_into_complex (type, val)
+     struct type *type;
+     register value_ptr val;
+{
+  struct type *real_type = TYPE_TARGET_TYPE (type);
+  if (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_COMPLEX)
+    {
+      struct type *val_real_type = TYPE_TARGET_TYPE (VALUE_TYPE (val));
+      value_ptr re_val = allocate_value (val_real_type);
+      value_ptr im_val = allocate_value (val_real_type);
+
+      memcpy (VALUE_CONTENTS_RAW (re_val),
+	      VALUE_CONTENTS (val), TYPE_LENGTH (val_real_type));
+      memcpy (VALUE_CONTENTS_RAW (im_val),
+	      VALUE_CONTENTS (val) + TYPE_LENGTH (val_real_type),
+	       TYPE_LENGTH (val_real_type));
+
+      return value_literal_complex (re_val, im_val, type);
+    }
+  else if (TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_FLT
+	   || TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT)
+    return value_literal_complex (val, value_zero (real_type, not_lval), type);
+  else
+    error ("cannot cast non-number to complex");
+}
+
+void
+_initialize_valops ()
+{
+#if 0
+  add_show_from_set
+    (add_set_cmd ("abandon", class_support, var_boolean, (char *)&auto_abandon,
+		  "Set automatic abandonment of expressions upon failure.",
+		  &setlist),
+     &showlist);
+#endif
+
+  add_show_from_set
+    (add_set_cmd ("overload-resolution", class_support, var_boolean, (char *)&overload_resolution,
+		  "Set overload resolution in evaluating C++ functions.",
+		  &setlist),
+     &showlist);
+  overload_resolution = 1;
+
+}
diff --git a/gdb/valprint.c b/gdb/valprint.c
new file mode 100644
index 0000000..b09da9b
--- /dev/null
+++ b/gdb/valprint.c
@@ -0,0 +1,1567 @@
+/* Print values for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1992, 1993, 1994, 1998
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "obstack.h"
+#include "language.h"
+#include "demangle.h"
+#include "annotate.h"
+#include "valprint.h"
+
+#include <errno.h>
+
+/* Prototypes for local functions */
+
+static void print_hex_chars PARAMS ((GDB_FILE *, unsigned char *, 
+                                     unsigned int));
+
+static void show_print PARAMS ((char *, int));
+
+static void set_print PARAMS ((char *, int));
+
+static void set_radix PARAMS ((char *, int));
+
+static void show_radix PARAMS ((char *, int));
+
+static void set_input_radix PARAMS ((char *, int, struct cmd_list_element *));
+
+static void set_input_radix_1 PARAMS ((int, unsigned));
+
+static void set_output_radix PARAMS ((char *, int, struct cmd_list_element *));
+
+static void set_output_radix_1 PARAMS ((int, unsigned));
+
+void _initialize_valprint PARAMS ((void));
+
+/* Maximum number of chars to print for a string pointer value or vector
+   contents, or UINT_MAX for no limit.  Note that "set print elements 0"
+   stores UINT_MAX in print_max, which displays in a show command as
+   "unlimited". */
+
+unsigned int print_max;
+#define PRINT_MAX_DEFAULT 200	/* Start print_max off at this value. */
+
+/* Default input and output radixes, and output format letter.  */
+
+unsigned input_radix = 10;
+unsigned output_radix = 10;
+int output_format = 0;
+
+/* Print repeat counts if there are more than this many repetitions of an
+   element in an array.  Referenced by the low level language dependent
+   print routines. */
+
+unsigned int repeat_count_threshold = 10;
+
+/* If nonzero, stops printing of char arrays at first null. */
+
+int stop_print_at_null;
+
+/* Controls pretty printing of structures. */
+
+int prettyprint_structs;
+
+/* Controls pretty printing of arrays.  */
+
+int prettyprint_arrays;
+
+/* If nonzero, causes unions inside structures or other unions to be
+   printed. */
+
+int unionprint;			/* Controls printing of nested unions.  */
+
+/* If nonzero, causes machine addresses to be printed in certain contexts. */
+
+int addressprint;		/* Controls printing of machine addresses */
+
+
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+   the inferior at address ADDRESS, onto stdio stream STREAM according to
+   FORMAT (a letter, or 0 for natural format using TYPE).
+
+   If DEREF_REF is nonzero, then dereference references, otherwise just print
+   them like pointers.
+
+   The PRETTY parameter controls prettyprinting.
+
+   If the data are a string pointer, returns the number of string characters
+   printed.
+
+   FIXME:  The data at VALADDR is in target byte order.  If gdb is ever
+   enhanced to be able to debug more than the single target it was compiled
+   for (specific CPU type and thus specific target byte ordering), then
+   either the print routines are going to have to take this into account,
+   or the data is going to have to be passed into here already converted
+   to the host byte ordering, whichever is more convenient. */
+
+
+int
+val_print (type, valaddr, embedded_offset, address,
+           stream, format, deref_ref, recurse, pretty)
+     struct type *type;
+     char *valaddr;
+     int embedded_offset;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+{
+  struct type *real_type = check_typedef (type);
+  if (pretty == Val_pretty_default)
+    {
+      pretty = prettyprint_structs ? Val_prettyprint : Val_no_prettyprint;
+    }
+  
+  QUIT;
+
+  /* Ensure that the type is complete and not just a stub.  If the type is
+     only a stub and we can't find and substitute its complete type, then
+     print appropriate string and return.  */
+
+  if (TYPE_FLAGS (real_type) & TYPE_FLAG_STUB)
+    {
+      fprintf_filtered (stream, "<incomplete type>");
+      gdb_flush (stream);
+      return (0);
+    }
+  
+  return (LA_VAL_PRINT (type, valaddr, embedded_offset, address,
+                        stream, format, deref_ref, recurse, pretty));
+}
+
+/* Print the value VAL in C-ish syntax on stream STREAM.
+   FORMAT is a format-letter, or 0 for print in natural format of data type.
+   If the object printed is a string pointer, returns
+   the number of string bytes printed.  */
+
+int
+value_print (val, stream, format, pretty)
+     value_ptr val;
+     GDB_FILE *stream;
+     int format;
+     enum val_prettyprint pretty;
+{
+  if (val == 0)
+    {
+      printf_filtered ("<address of value unknown>");
+      return 0;
+    }
+  if (VALUE_OPTIMIZED_OUT (val))
+    {
+      printf_filtered ("<value optimized out>");
+      return 0;
+    }
+  return LA_VALUE_PRINT (val, stream, format, pretty);
+}
+
+/* Called by various <lang>_val_print routines to print
+   TYPE_CODE_INT's.  TYPE is the type.  VALADDR is the address of the
+   value.  STREAM is where to print the value.  */
+
+void
+val_print_type_code_int (type, valaddr, stream)
+     struct type *type;
+     char *valaddr;
+     GDB_FILE *stream;
+{
+  if (TYPE_LENGTH (type) > sizeof (LONGEST))
+    {
+      LONGEST val;
+
+      if (TYPE_UNSIGNED (type)
+	  && extract_long_unsigned_integer (valaddr, TYPE_LENGTH (type),
+					    &val))
+	{
+	  print_longest (stream, 'u', 0, val);
+	}
+      else
+	{
+	  /* Signed, or we couldn't turn an unsigned value into a
+	     LONGEST.  For signed values, one could assume two's
+	     complement (a reasonable assumption, I think) and do
+	     better than this.  */
+	  print_hex_chars (stream, (unsigned char *) valaddr,
+			   TYPE_LENGTH (type));
+	}
+    }
+  else
+    {
+#ifdef PRINT_TYPELESS_INTEGER
+      PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
+#else
+      print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
+		     unpack_long (type, valaddr));
+#endif
+    }
+}
+
+/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
+   The raison d'etre of this function is to consolidate printing of 
+   LONG_LONG's into this one function.  Some platforms have long longs but
+   don't have a printf() that supports "ll" in the format string.  We handle
+   these by seeing if the number is representable as either a signed or
+   unsigned long, depending upon what format is desired, and if not we just
+   bail out and print the number in hex.
+
+   The format chars b,h,w,g are from print_scalar_formatted().  If USE_LOCAL,
+   format it according to the current language (this should be used for most
+   integers which GDB prints, the exception is things like protocols where
+   the format of the integer is a protocol thing, not a user-visible thing).
+   */
+
+#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
+static void
+print_decimal (stream, sign, use_local, val_ulong)
+     GDB_FILE *stream;
+     char *sign;
+     int use_local;
+     ULONGEST val_ulong;
+{
+  unsigned long temp[3];
+  int i = 0;
+  do
+    {
+      temp[i] = val_ulong % (1000 * 1000 * 1000);
+      val_ulong /= (1000 * 1000 * 1000);
+      i++;
+    }
+  while (val_ulong != 0 && i < (sizeof (temp) / sizeof (temp[0])));
+  switch (i)
+    {
+    case 1:
+      fprintf_filtered (stream, "%s%lu",
+			sign, temp[0]);
+      break;
+    case 2:
+      fprintf_filtered (stream, "%s%lu%09lu",
+			sign, temp[1], temp[0]);
+      break;
+    case 3:
+      fprintf_filtered (stream, "%s%lu%09lu%09lu",
+			sign, temp[2], temp[1], temp[0]);
+      break;
+    default:
+      abort ();
+    }
+  return;
+}
+#endif
+
+void
+print_longest (stream, format, use_local, val_long)
+     GDB_FILE *stream;
+     int format;
+     int use_local;
+     LONGEST val_long;
+{
+#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
+  if (sizeof (long) < sizeof (LONGEST))
+    {
+      switch (format)
+	{
+	case 'd':
+	  {
+	    /* Print a signed value, that doesn't fit in a long */
+	    if ((long) val_long != val_long)
+	      {
+		if (val_long < 0)
+		  print_decimal (stream, "-", use_local, -val_long);
+		else
+		  print_decimal (stream, "", use_local, val_long);
+		return;
+	      }
+	    break;
+	  }
+	case 'u':
+	  {
+	    /* Print an unsigned value, that doesn't fit in a long */
+	    if ((unsigned long) val_long != (ULONGEST) val_long)
+	      {
+		print_decimal (stream, "", use_local, val_long);
+		return;
+	      }
+	    break;
+	  }
+	case 'x':
+	case 'o':
+	case 'b':
+	case 'h':
+	case 'w':
+	case 'g':
+	  /* Print as unsigned value, must fit completely in unsigned long */
+	  {
+	    unsigned long temp = val_long;
+	    if (temp != val_long)
+	      {
+		/* Urk, can't represent value in long so print in hex.
+		   Do shift in two operations so that if sizeof (long)
+		   == sizeof (LONGEST) we can avoid warnings from
+		   picky compilers about shifts >= the size of the
+		   shiftee in bits */
+		unsigned long vbot = (unsigned long) val_long;
+		LONGEST temp = (val_long >> (sizeof (long) * HOST_CHAR_BIT - 1));
+		unsigned long vtop = temp >> 1;
+		fprintf_filtered (stream, "0x%lx%08lx", vtop, vbot);
+		return;
+	      }
+	    break;
+	  }
+	}
+    }
+#endif
+
+#if defined (CC_HAS_LONG_LONG) && defined (PRINTF_HAS_LONG_LONG)
+  switch (format)
+    {
+    case 'd':
+      fprintf_filtered (stream,
+			use_local ? local_decimal_format_custom ("ll")
+				  : "%lld",
+			val_long);
+      break;
+    case 'u':
+      fprintf_filtered (stream, "%llu", val_long);
+      break;
+    case 'x':
+      fprintf_filtered (stream,
+			use_local ? local_hex_format_custom ("ll")
+				  : "%llx",
+			val_long);
+      break;
+    case 'o':
+      fprintf_filtered (stream,
+			use_local ? local_octal_format_custom ("ll")
+				  : "%llo",
+			val_long);
+      break;
+    case 'b':
+      fprintf_filtered (stream, local_hex_format_custom ("02ll"), val_long);
+      break;
+    case 'h':
+      fprintf_filtered (stream, local_hex_format_custom ("04ll"), val_long);
+      break;
+    case 'w':
+      fprintf_filtered (stream, local_hex_format_custom ("08ll"), val_long);
+      break;
+    case 'g':
+      fprintf_filtered (stream, local_hex_format_custom ("016ll"), val_long);
+      break;
+    default:
+      abort ();
+    }
+#else /* !CC_HAS_LONG_LONG || !PRINTF_HAS_LONG_LONG*/
+  /* In the following it is important to coerce (val_long) to a long. It does
+     nothing if !LONG_LONG, but it will chop off the top half (which we know
+     we can ignore) if the host supports long longs.  */
+
+  switch (format)
+    {
+    case 'd':
+      fprintf_filtered (stream,
+			use_local ? local_decimal_format_custom ("l")
+				  : "%ld",
+			(long) val_long);
+      break;
+    case 'u':
+      fprintf_filtered (stream, "%lu", (unsigned long) val_long);
+      break;
+    case 'x':
+      fprintf_filtered (stream,
+			use_local ? local_hex_format_custom ("l")
+				  : "%lx",
+			(unsigned long) val_long);
+      break;
+    case 'o':
+      fprintf_filtered (stream,
+			use_local ? local_octal_format_custom ("l")
+				  : "%lo",
+			(unsigned long) val_long);
+      break;
+    case 'b':
+      fprintf_filtered (stream, local_hex_format_custom ("02l"),
+			(unsigned long) val_long);
+      break;
+    case 'h':
+      fprintf_filtered (stream, local_hex_format_custom ("04l"),
+			(unsigned long) val_long);
+      break;
+    case 'w':
+      fprintf_filtered (stream, local_hex_format_custom ("08l"),
+			(unsigned long) val_long);
+      break;
+    case 'g':
+      fprintf_filtered (stream, local_hex_format_custom ("016l"),
+			(unsigned long) val_long);
+      break;
+    default:
+      abort ();
+    }
+#endif /* CC_HAS_LONG_LONG || PRINTF_HAS_LONG_LONG */
+}
+
+void
+strcat_longest (format, use_local, val_long, buf, buflen)
+     int format;
+     int use_local;
+     LONGEST val_long;
+     char *buf;
+     int buflen;		/* ignored, for now */
+{
+#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
+  long vtop, vbot;
+
+  vtop = val_long >> (sizeof (long) * HOST_CHAR_BIT);
+  vbot = (long) val_long;
+
+  if ((format == 'd' && (val_long < INT_MIN || val_long > INT_MAX))
+      || ((format == 'u' || format == 'x') && (unsigned long long)val_long > UINT_MAX))
+    {
+      sprintf (buf, "0x%lx%08lx", vtop, vbot);
+      return;
+    }
+#endif
+
+#ifdef PRINTF_HAS_LONG_LONG
+  switch (format)
+    {
+    case 'd':
+      sprintf (buf,
+	       (use_local ? local_decimal_format_custom ("ll") : "%lld"), 
+	       val_long);
+      break;
+    case 'u':
+      sprintf (buf, "%llu",  val_long);
+      break;
+    case 'x':
+      sprintf (buf,
+	       (use_local ? local_hex_format_custom ("ll") : "%llx"), 
+			
+	       val_long);
+      break;
+    case 'o':
+      sprintf (buf,
+	       (use_local ? local_octal_format_custom ("ll") : "%llo"), 
+	       val_long);
+      break;
+    case 'b':
+      sprintf (buf, local_hex_format_custom ("02ll"),  val_long);
+      break;
+    case 'h':
+      sprintf (buf, local_hex_format_custom ("04ll"),  val_long);
+      break;
+    case 'w':
+      sprintf (buf, local_hex_format_custom ("08ll"),  val_long);
+      break;
+    case 'g':
+      sprintf (buf, local_hex_format_custom ("016ll"),  val_long);
+      break;
+    default:
+      abort ();
+    }
+#else /* !PRINTF_HAS_LONG_LONG */
+  /* In the following it is important to coerce (val_long) to a long. It does
+     nothing if !LONG_LONG, but it will chop off the top half (which we know
+     we can ignore) if the host supports long longs.  */
+
+  switch (format)
+    {
+    case 'd':
+      sprintf (buf, (use_local ? local_decimal_format_custom ("l") : "%ld"), 
+								 ((long) val_long));
+      break;
+    case 'u':
+      sprintf (buf, "%lu",  ((unsigned long) val_long));
+      break;
+    case 'x':
+      sprintf (buf, (use_local ? local_hex_format_custom ("l") : "%lx"), 
+	       ((long) val_long));
+      break;
+    case 'o':
+      sprintf (buf, (use_local ? local_octal_format_custom ("l") : "%lo"), 
+	       ((long) val_long));
+      break;
+    case 'b':
+      sprintf (buf, local_hex_format_custom ("02l"), 
+	       ((long) val_long));
+      break;
+    case 'h':
+      sprintf (buf, local_hex_format_custom ("04l"), 
+	       ((long) val_long));
+      break;
+    case 'w':
+      sprintf (buf, local_hex_format_custom ("08l"), 
+	       ((long) val_long));
+      break;
+    case 'g':
+      sprintf (buf, local_hex_format_custom ("016l"),
+	       ((long) val_long));
+      break;
+    default:
+      abort ();
+    }
+    
+#endif /* !PRINTF_HAS_LONG_LONG */
+}
+
+/* This used to be a macro, but I don't think it is called often enough
+   to merit such treatment.  */
+/* Convert a LONGEST to an int.  This is used in contexts (e.g. number of
+   arguments to a function, number in a value history, register number, etc.)
+   where the value must not be larger than can fit in an int.  */
+
+int
+longest_to_int (arg)
+     LONGEST arg;
+{
+  /* Let the compiler do the work */
+  int rtnval = (int) arg;
+
+  /* Check for overflows or underflows */
+  if (sizeof (LONGEST) > sizeof (int))
+    {
+      if (rtnval != arg)
+	{
+	  error ("Value out of range.");
+	}
+    }
+  return (rtnval);
+}
+
+/* Print a floating point value of type TYPE, pointed to in GDB by VALADDR,
+   on STREAM.  */
+
+void
+print_floating (valaddr, type, stream)
+     char *valaddr;
+     struct type *type;
+     GDB_FILE *stream;
+{
+  DOUBLEST doub;
+  int inv;
+  unsigned len = TYPE_LENGTH (type);
+  
+#if defined (IEEE_FLOAT)
+
+  /* Check for NaN's.  Note that this code does not depend on us being
+     on an IEEE conforming system.  It only depends on the target
+     machine using IEEE representation.  This means (a)
+     cross-debugging works right, and (2) IEEE_FLOAT can (and should)
+     be defined for systems like the 68881, which uses IEEE
+     representation, but is not IEEE conforming.  */
+
+  {
+    unsigned long low, high;
+    /* Is the sign bit 0?  */
+    int nonnegative;
+    /* Is it is a NaN (i.e. the exponent is all ones and
+       the fraction is nonzero)?  */
+    int is_nan;
+
+    /* For lint, initialize these two variables to suppress warning: */
+    low = high = nonnegative = 0;
+    if (len == 4)
+      {
+	/* It's single precision.  */
+	/* Assume that floating point byte order is the same as
+	   integer byte order.  */
+	low = extract_unsigned_integer (valaddr, 4);
+	nonnegative = ((low & 0x80000000) == 0);
+	is_nan = ((((low >> 23) & 0xFF) == 0xFF) 
+		  && 0 != (low & 0x7FFFFF));
+	low &= 0x7fffff;
+	high = 0;
+      }
+    else if (len == 8)
+      {
+	/* It's double precision.  Get the high and low words.  */
+
+	/* Assume that floating point byte order is the same as
+	   integer byte order.  */
+	if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+	  {
+	    low = extract_unsigned_integer (valaddr + 4, 4);
+	    high = extract_unsigned_integer (valaddr, 4);
+	  }
+	else
+	  {
+	    low = extract_unsigned_integer (valaddr, 4);
+	    high = extract_unsigned_integer (valaddr + 4, 4);
+	  }
+	nonnegative = ((high & 0x80000000) == 0);
+	is_nan = (((high >> 20) & 0x7ff) == 0x7ff
+		  && ! ((((high & 0xfffff) == 0)) && (low == 0)));
+	high &= 0xfffff;
+      }
+    else
+      /* Extended.  We can't detect NaNs for extendeds yet.  Also note
+	 that currently extendeds get nuked to double in
+	 REGISTER_CONVERTIBLE.  */
+      is_nan = 0;
+
+    if (is_nan)
+      {
+	/* The meaning of the sign and fraction is not defined by IEEE.
+	   But the user might know what they mean.  For example, they
+	   (in an implementation-defined manner) distinguish between
+	   signaling and quiet NaN's.  */
+	if (high)
+	  fprintf_filtered (stream, "-NaN(0x%lx%.8lx)" + nonnegative,
+			    high, low);
+	else
+	  fprintf_filtered (stream, "-NaN(0x%lx)" + nonnegative, low);
+	return;
+      }
+  }
+#endif /* IEEE_FLOAT.  */
+
+  doub = unpack_double (type, valaddr, &inv);
+  if (inv)
+    {
+      fprintf_filtered (stream, "<invalid float value>");
+      return;
+    }
+
+  if (len < sizeof (double))
+    fprintf_filtered (stream, "%.9g", (double) doub);
+  else if (len == sizeof (double))
+    fprintf_filtered (stream, "%.17g", (double) doub);
+  else
+#ifdef PRINTF_HAS_LONG_DOUBLE
+    fprintf_filtered (stream, "%.35Lg", doub);
+#else
+    /* This at least wins with values that are representable as doubles */
+    fprintf_filtered (stream, "%.17g", (double) doub);
+#endif
+}
+
+void 
+print_binary_chars (stream, valaddr, len)
+     GDB_FILE *stream;
+     unsigned char *valaddr;
+     unsigned len;
+{
+
+#define BITS_IN_BYTES 8
+
+  unsigned char *p;
+  int            i;
+  int            b;
+
+  /* Declared "int" so it will be signed.
+   * This ensures that right shift will shift in zeros.
+   */
+  const int      mask = 0x080;
+
+  /* FIXME: We should be not printing leading zeroes in most cases.  */
+
+  fprintf_filtered (stream, local_binary_format_prefix ());
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = valaddr;
+	   p < valaddr + len;
+	   p++)
+	{
+          /* Every byte has 8 binary characters; peel off
+           * and print from the MSB end.
+           */
+          for( i = 0; i < (BITS_IN_BYTES * sizeof( *p )); i++ ) {
+              if( *p & ( mask >> i ))
+                  b = 1;
+              else
+                  b = 0;
+
+     	      fprintf_filtered (stream, "%1d", b);
+          }
+	}
+    }
+  else
+    {
+      for (p = valaddr + len - 1;
+	   p >= valaddr;
+	   p--)
+	{
+          for( i = 0; i < (BITS_IN_BYTES * sizeof( *p )); i++ ) {
+              if( *p & ( mask >> i ))
+                  b = 1;
+              else
+                  b = 0;
+
+     	      fprintf_filtered (stream, "%1d", b);
+          }
+	}
+    }
+  fprintf_filtered (stream, local_binary_format_suffix ());
+}
+
+/* VALADDR points to an integer of LEN bytes.
+ * Print it in octal on stream or format it in buf.
+ */
+void
+print_octal_chars (stream, valaddr, len)
+     GDB_FILE *stream;
+     unsigned char *valaddr;
+     unsigned len;
+{
+  unsigned char *p;
+  unsigned char octa1, octa2, octa3, carry;
+  int           cycle;
+  
+  /* FIXME: We should be not printing leading zeroes in most cases.  */
+
+
+  /* Octal is 3 bits, which doesn't fit.  Yuk.  So we have to track
+   * the extra bits, which cycle every three bytes:
+   *
+   * Byte side:       0            1             2          3
+   *                         |             |            |            |
+   * bit number   123 456 78 | 9 012 345 6 | 78 901 234 | 567 890 12 |
+   *
+   * Octal side:   0   1   carry  3   4  carry ...
+   *
+   * Cycle number:    0             1            2
+   *
+   * But of course we are printing from the high side, so we have to
+   * figure out where in the cycle we are so that we end up with no
+   * left over bits at the end.
+   */
+#define BITS_IN_OCTAL 3
+#define HIGH_ZERO     0340
+#define LOW_ZERO      0016
+#define CARRY_ZERO    0003
+#define HIGH_ONE      0200
+#define MID_ONE       0160
+#define LOW_ONE       0016
+#define CARRY_ONE     0001
+#define HIGH_TWO      0300
+#define MID_TWO       0070
+#define LOW_TWO       0007
+
+  /* For 32 we start in cycle 2, with two bits and one bit carry;
+   * for 64 in cycle in cycle 1, with one bit and a two bit carry.
+   */
+  cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
+  carry = 0;
+  
+  fprintf_filtered (stream, local_octal_format_prefix ());
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = valaddr;
+	   p < valaddr + len;
+	   p++)
+	{
+          switch (cycle) {
+              case 0:
+                 /* No carry in, carry out two bits.
+                  */
+                 octa1 = (HIGH_ZERO  & *p) >> 5;
+                 octa2 = (LOW_ZERO   & *p) >> 2;
+                 carry = (CARRY_ZERO & *p);
+    	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+                 break;
+
+              case 1:
+                 /* Carry in two bits, carry out one bit.
+                  */
+                 octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
+                 octa2 = (MID_ONE   & *p) >> 4;
+                 octa3 = (LOW_ONE   & *p) >> 1;
+                 carry = (CARRY_ONE & *p);
+    	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+    	         fprintf_filtered (stream, "%o", octa3);
+                 break;
+
+              case 2:
+                 /* Carry in one bit, no carry out.
+                  */
+                 octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
+                 octa2 = (MID_TWO & *p) >> 3;
+                 octa3 = (LOW_TWO & *p);
+                 carry = 0;
+    	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+    	         fprintf_filtered (stream, "%o", octa3);
+                 break;
+                 
+              default:
+                 error( "Internal error in octal conversion;" );
+          }
+
+          cycle++;
+          cycle = cycle % BITS_IN_OCTAL;
+	}
+    }
+  else
+    {
+      for (p = valaddr + len - 1;
+	   p >= valaddr;
+	   p--)
+	{
+          switch (cycle) {
+              case 0:
+                 /* Carry out, no carry in */
+                 octa1 = (HIGH_ZERO  & *p) >> 5;
+                 octa2 = (LOW_ZERO   & *p) >> 2;
+                 carry = (CARRY_ZERO & *p);
+    	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+                 break;
+
+              case 1:
+                 /* Carry in, carry out */
+                 octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
+                 octa2 = (MID_ONE   & *p) >> 4;
+                 octa3 = (LOW_ONE   & *p) >> 1;
+                 carry = (CARRY_ONE & *p);
+    	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+    	         fprintf_filtered (stream, "%o", octa3);
+                 break;
+
+              case 2:
+                 /* Carry in, no carry out */
+                 octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
+                 octa2 = (MID_TWO & *p) >> 3;
+                 octa3 = (LOW_TWO & *p);
+                 carry = 0;
+     	         fprintf_filtered (stream, "%o", octa1);
+    	         fprintf_filtered (stream, "%o", octa2);
+    	         fprintf_filtered (stream, "%o", octa3);
+                 break;
+                 
+              default:
+                 error( "Internal error in octal conversion;" );
+          }
+
+          cycle++;
+          cycle = cycle % BITS_IN_OCTAL;
+	}
+    }
+
+  fprintf_filtered (stream, local_octal_format_suffix ());
+}
+
+/* VALADDR points to an integer of LEN bytes.
+ * Print it in decimal on stream or format it in buf.
+ */
+void
+print_decimal_chars (stream, valaddr, len)
+     GDB_FILE *stream;
+     unsigned char *valaddr;
+     unsigned len;
+{
+#define TEN             10
+#define TWO_TO_FOURTH   16
+#define CARRY_OUT(  x ) ((x) / TEN)  /* extend char to int */
+#define CARRY_LEFT( x ) ((x) % TEN)
+#define SHIFT( x )      ((x) << 4)
+#define START_P \
+        ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? valaddr : valaddr + len - 1)
+#define NOT_END_P \
+        ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? (p < valaddr + len) : (p >= valaddr))
+#define NEXT_P \
+        ((TARGET_BYTE_ORDER == BIG_ENDIAN) ? p++ : p-- )
+#define LOW_NIBBLE(  x ) ( (x) & 0x00F)
+#define HIGH_NIBBLE( x ) (((x) & 0x0F0) >> 4)
+
+  unsigned char *p;
+  unsigned char *digits;
+  int            carry;
+  int            decimal_len;
+  int            i, j, decimal_digits;
+  int            dummy;
+  int            flip;
+  
+  /* Base-ten number is less than twice as many digits
+   * as the base 16 number, which is 2 digits per byte.
+   */
+  decimal_len = len * 2 * 2;
+  digits = (unsigned char *) malloc( decimal_len );
+  if( digits == NULL )
+      error( "Can't allocate memory for conversion to decimal." );
+
+  for( i = 0; i < decimal_len; i++ ) {
+      digits[i] = 0;
+  }
+
+  fprintf_filtered (stream, local_decimal_format_prefix ());
+
+  /* Ok, we have an unknown number of bytes of data to be printed in
+   * decimal.
+   *
+   * Given a hex number (in nibbles) as XYZ, we start by taking X and
+   * decemalizing it as "x1 x2" in two decimal nibbles.  Then we multiply
+   * the nibbles by 16, add Y and re-decimalize.  Repeat with Z.
+   *
+   * The trick is that "digits" holds a base-10 number, but sometimes
+   * the individual digits are > 10. 
+   *
+   * Outer loop is per nibble (hex digit) of input, from MSD end to
+   * LSD end.
+   */
+  decimal_digits = 0;  /* Number of decimal digits so far */
+  p = START_P;
+  flip = 0;
+  while( NOT_END_P ) {
+      /*
+       * Multiply current base-ten number by 16 in place.
+       * Each digit was between 0 and 9, now is between
+       * 0 and 144.
+       */
+      for( j = 0; j < decimal_digits; j++ ) {
+           digits[j] = SHIFT( digits[j] );
+      }
+    
+      /* Take the next nibble off the input and add it to what
+       * we've got in the LSB position.  Bottom 'digit' is now
+       * between 0 and 159.
+       *
+       * "flip" is used to run this loop twice for each byte.
+       */
+      if( flip == 0 ) {
+          /* Take top nibble.
+           */
+          digits[0] += HIGH_NIBBLE( *p );
+          flip = 1;
+      }
+      else {
+          /* Take low nibble and bump our pointer "p".
+           */
+          digits[0] += LOW_NIBBLE( *p );
+          NEXT_P;
+          flip = 0;
+      }
+
+      /* Re-decimalize.  We have to do this often enough
+       * that we don't overflow, but once per nibble is
+       * overkill.  Easier this way, though.  Note that the
+       * carry is often larger than 10 (e.g. max initial
+       * carry out of lowest nibble is 15, could bubble all
+       * the way up greater than 10).  So we have to do
+       * the carrying beyond the last current digit.
+       */
+      carry = 0;
+      for( j = 0; j < decimal_len - 1; j++ ) {
+          digits[j] += carry;
+
+          /* "/" won't handle an unsigned char with
+           * a value that if signed would be negative.
+           * So extend to longword int via "dummy".
+           */
+          dummy     = digits[j];
+          carry     = CARRY_OUT(  dummy );
+          digits[j] = CARRY_LEFT( dummy );
+
+          if( j >= decimal_digits && carry == 0 ) {
+              /*
+               * All higher digits are 0 and we
+               * no longer have a carry.
+               *
+               * Note: "j" is 0-based, "decimal_digits" is
+               *       1-based.
+               */
+              decimal_digits = j + 1;
+              break;
+          }
+      }
+  }
+
+  /* Ok, now "digits" is the decimal representation, with
+   * the "decimal_digits" actual digits.  Print!
+   */
+  for( i = decimal_digits - 1; i >= 0; i-- ) {
+      fprintf_filtered( stream, "%1d", digits[i] );
+  }
+  free( digits );
+  
+  fprintf_filtered (stream, local_decimal_format_suffix ());
+}
+
+/* VALADDR points to an integer of LEN bytes.  Print it in hex on stream.  */
+
+static void
+print_hex_chars (stream, valaddr, len)
+     GDB_FILE *stream;
+     unsigned char *valaddr;
+     unsigned len;
+{
+  unsigned char *p;
+
+  /* FIXME: We should be not printing leading zeroes in most cases.  */
+
+  fprintf_filtered (stream, local_hex_format_prefix ());
+  if (TARGET_BYTE_ORDER == BIG_ENDIAN)
+    {
+      for (p = valaddr;
+	   p < valaddr + len;
+	   p++)
+	{
+	  fprintf_filtered (stream, "%02x", *p);
+	}
+    }
+  else
+    {
+      for (p = valaddr + len - 1;
+	   p >= valaddr;
+	   p--)
+	{
+	  fprintf_filtered (stream, "%02x", *p);
+	}
+    }
+  fprintf_filtered (stream, local_hex_format_suffix ());
+}
+
+/*  Called by various <lang>_val_print routines to print elements of an
+    array in the form "<elem1>, <elem2>, <elem3>, ...".
+
+    (FIXME?)  Assumes array element separator is a comma, which is correct
+    for all languages currently handled.
+    (FIXME?)  Some languages have a notation for repeated array elements,
+    perhaps we should try to use that notation when appropriate.
+    */
+
+void
+val_print_array_elements (type, valaddr, address, stream, format, deref_ref,
+			  recurse, pretty, i)
+     struct type *type;
+     char *valaddr;
+     CORE_ADDR address;
+     GDB_FILE *stream;
+     int format;
+     int deref_ref;
+     int recurse;
+     enum val_prettyprint pretty;
+     unsigned int i;
+{
+  unsigned int things_printed = 0;
+  unsigned len;
+  struct type *elttype;
+  unsigned eltlen;
+  /* Position of the array element we are examining to see
+     whether it is repeated.  */
+  unsigned int rep1;
+  /* Number of repetitions we have detected so far.  */
+  unsigned int reps;
+      
+  elttype = TYPE_TARGET_TYPE (type);
+  eltlen = TYPE_LENGTH (check_typedef (elttype));
+  len = TYPE_LENGTH (type) / eltlen;
+
+  annotate_array_section_begin (i, elttype);
+
+  for (; i < len && things_printed < print_max; i++)
+    {
+      if (i != 0)
+	{
+	  if (prettyprint_arrays)
+	    {
+	      fprintf_filtered (stream, ",\n");
+	      print_spaces_filtered (2 + 2 * recurse, stream);
+	    }
+	  else
+	    {
+	      fprintf_filtered (stream, ", ");
+	    }
+	}
+      wrap_here (n_spaces (2 + 2 * recurse));
+
+      rep1 = i + 1;
+      reps = 1;
+      while ((rep1 < len) && 
+	     !memcmp (valaddr + i * eltlen, valaddr + rep1 * eltlen, eltlen))
+	{
+	  ++reps;
+	  ++rep1;
+	}
+
+      if (reps > repeat_count_threshold)
+	{
+	  val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
+		     deref_ref, recurse + 1, pretty);
+	  annotate_elt_rep (reps);
+	  fprintf_filtered (stream, " <repeats %u times>", reps);
+	  annotate_elt_rep_end ();
+
+	  i = rep1 - 1;
+	  things_printed += repeat_count_threshold;
+	}
+      else
+	{
+	  val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
+		     deref_ref, recurse + 1, pretty);
+	  annotate_elt ();
+	  things_printed++;
+	}
+    }
+  annotate_array_section_end ();
+  if (i < len)
+    {
+      fprintf_filtered (stream, "...");
+    }
+}
+
+/*  Print a string from the inferior, starting at ADDR and printing up to LEN
+    characters, of WIDTH bytes a piece, to STREAM.  If LEN is -1, printing
+    stops at the first null byte, otherwise printing proceeds (including null
+    bytes) until either print_max or LEN characters have been printed,
+    whichever is smaller. */
+
+/* FIXME: Use target_read_string.  */
+
+int
+val_print_string (addr, len, width, stream)
+    CORE_ADDR addr;
+    int len;
+    int width;
+    GDB_FILE *stream;
+{
+  int force_ellipsis = 0;	/* Force ellipsis to be printed if nonzero. */
+  int errcode;			/* Errno returned from bad reads. */
+  unsigned int fetchlimit;	/* Maximum number of chars to print. */
+  unsigned int nfetch;		/* Chars to fetch / chars fetched. */
+  unsigned int chunksize;	/* Size of each fetch, in chars. */
+  char *buffer = NULL;		/* Dynamically growable fetch buffer. */
+  char *bufptr;			/* Pointer to next available byte in buffer. */
+  char *limit;			/* First location past end of fetch buffer. */
+  struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+  int found_nul;		/* Non-zero if we found the nul char */
+
+  /* First we need to figure out the limit on the number of characters we are
+     going to attempt to fetch and print.  This is actually pretty simple.  If
+     LEN >= zero, then the limit is the minimum of LEN and print_max.  If
+     LEN is -1, then the limit is print_max.  This is true regardless of
+     whether print_max is zero, UINT_MAX (unlimited), or something in between,
+     because finding the null byte (or available memory) is what actually
+     limits the fetch. */
+
+  fetchlimit = (len == -1 ? print_max : min (len, print_max));
+
+  /* Now decide how large of chunks to try to read in one operation.  This
+     is also pretty simple.  If LEN >= zero, then we want fetchlimit chars,
+     so we might as well read them all in one operation.  If LEN is -1, we
+     are looking for a null terminator to end the fetching, so we might as
+     well read in blocks that are large enough to be efficient, but not so
+     large as to be slow if fetchlimit happens to be large.  So we choose the
+     minimum of 8 and fetchlimit.  We used to use 200 instead of 8 but
+     200 is way too big for remote debugging over a serial line.  */
+
+  chunksize = (len == -1 ? min (8, fetchlimit) : fetchlimit);
+
+  /* Loop until we either have all the characters to print, or we encounter
+     some error, such as bumping into the end of the address space. */
+
+  found_nul = 0;
+  old_chain = make_cleanup (null_cleanup, 0);
+
+  if (len > 0)
+    {
+      buffer = (char *) xmalloc (len * width);
+      bufptr = buffer;
+      old_chain = make_cleanup (free, buffer);
+
+      nfetch = target_read_memory_partial (addr, bufptr, len * width, &errcode)
+	/ width;
+      addr += nfetch * width;
+      bufptr += nfetch * width;
+    }
+  else if (len == -1)
+    {
+      unsigned long bufsize = 0;
+      do
+	{
+	  QUIT;
+	  nfetch = min (chunksize, fetchlimit - bufsize);
+
+	  if (buffer == NULL)
+	    buffer = (char *) xmalloc (nfetch * width);
+	  else
+	    {
+	      discard_cleanups (old_chain);
+	      buffer = (char *) xrealloc (buffer, (nfetch + bufsize) * width);
+	    }
+
+	  old_chain = make_cleanup (free, buffer);
+	  bufptr = buffer + bufsize * width;
+	  bufsize += nfetch;
+
+	  /* Read as much as we can. */
+	  nfetch = target_read_memory_partial (addr, bufptr, nfetch * width, &errcode)
+		   / width;
+
+	  /* Scan this chunk for the null byte that terminates the string
+	     to print.  If found, we don't need to fetch any more.  Note
+	     that bufptr is explicitly left pointing at the next character
+	     after the null byte, or at the next character after the end of
+	     the buffer. */
+
+	  limit = bufptr + nfetch * width;
+	  while (bufptr < limit)
+	    {
+	      unsigned long c;
+
+	      c = extract_unsigned_integer (bufptr, width);
+	      addr += width;
+	      bufptr += width;
+	      if (c == 0)
+		{
+		  /* We don't care about any error which happened after
+		     the NULL terminator.  */
+		  errcode = 0;
+		  found_nul = 1;
+		  break;
+		}
+	    }
+	}
+    while (errcode == 0				      /* no error */
+	   && bufptr - buffer < fetchlimit * width   /* no overrun */
+	   && !found_nul);			      /* haven't found nul yet */
+    }
+  else
+    {				/* length of string is really 0! */
+      buffer = bufptr = NULL;
+      errcode = 0;
+    }
+
+  /* bufptr and addr now point immediately beyond the last byte which we
+     consider part of the string (including a '\0' which ends the string).  */
+
+  /* We now have either successfully filled the buffer to fetchlimit, or
+     terminated early due to an error or finding a null char when LEN is -1. */
+
+  if (len == -1 && !found_nul)
+    {
+      char *peekbuf;
+
+      /* We didn't find a null terminator we were looking for.  Attempt
+	 to peek at the next character.  If not successful, or it is not
+	 a null byte, then force ellipsis to be printed.  */
+
+      peekbuf = (char *) alloca (width);
+
+      if (target_read_memory (addr, peekbuf, width) == 0
+	  && extract_unsigned_integer (peekbuf, width) != 0)
+	force_ellipsis = 1;
+    }
+  else if ((len >= 0 && errcode != 0) || (len > (bufptr - buffer)/width))
+    {
+      /* Getting an error when we have a requested length, or fetching less
+	 than the number of characters actually requested, always make us
+	 print ellipsis. */
+      force_ellipsis = 1;
+    }
+
+  QUIT;
+
+  /* If we get an error before fetching anything, don't print a string.
+     But if we fetch something and then get an error, print the string
+     and then the error message.  */
+  if (errcode == 0 || bufptr > buffer)
+    {
+      if (addressprint)
+	{
+	  fputs_filtered (" ", stream);
+	}
+      LA_PRINT_STRING (stream, buffer, (bufptr - buffer)/width, width, force_ellipsis);
+    }
+
+  if (errcode != 0)
+    {
+      if (errcode == EIO)
+	{
+	  fprintf_filtered (stream, " <Address ");
+	  print_address_numeric (addr, 1, stream);
+	  fprintf_filtered (stream, " out of bounds>");
+	}
+      else
+	{
+	  fprintf_filtered (stream, " <Error reading address ");
+	  print_address_numeric (addr, 1, stream);
+	  fprintf_filtered (stream, ": %s>", safe_strerror (errcode));
+	}
+    }
+  gdb_flush (stream);
+  do_cleanups (old_chain);
+  return ((bufptr - buffer)/width);
+}
+
+
+/* Validate an input or output radix setting, and make sure the user
+   knows what they really did here.  Radix setting is confusing, e.g.
+   setting the input radix to "10" never changes it!  */
+
+/* ARGSUSED */
+static void
+set_input_radix (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  set_input_radix_1 (from_tty, *(unsigned *)c->var);
+}
+
+/* ARGSUSED */
+static void
+set_input_radix_1 (from_tty, radix)
+     int from_tty;
+     unsigned radix;
+{
+  /* We don't currently disallow any input radix except 0 or 1, which don't
+     make any mathematical sense.  In theory, we can deal with any input
+     radix greater than 1, even if we don't have unique digits for every
+     value from 0 to radix-1, but in practice we lose on large radix values.
+     We should either fix the lossage or restrict the radix range more.
+     (FIXME). */
+
+  if (radix < 2)
+    {
+      error ("Nonsense input radix ``decimal %u''; input radix unchanged.",
+	     radix);
+    }
+  input_radix = radix;
+  if (from_tty)
+    {
+      printf_filtered ("Input radix now set to decimal %u, hex %x, octal %o.\n",
+		       radix, radix, radix);
+    }
+}
+
+/* ARGSUSED */
+static void
+set_output_radix (args, from_tty, c)
+     char *args;
+     int from_tty;
+     struct cmd_list_element *c;
+{
+  set_output_radix_1 (from_tty, *(unsigned *)c->var);
+}
+
+static void
+set_output_radix_1 (from_tty, radix)
+     int from_tty;
+     unsigned radix;
+{
+  /* Validate the radix and disallow ones that we aren't prepared to
+     handle correctly, leaving the radix unchanged. */
+  switch (radix)
+    {
+    case 16:
+      output_format = 'x';		/* hex */
+      break;
+    case 10:
+      output_format = 0;		/* decimal */
+      break;
+    case 8:
+      output_format = 'o';		/* octal */
+      break;
+    default:
+      error ("Unsupported output radix ``decimal %u''; output radix unchanged.",
+	     radix);
+    }
+  output_radix = radix;
+  if (from_tty)
+    {
+      printf_filtered ("Output radix now set to decimal %u, hex %x, octal %o.\n",
+		       radix, radix, radix);
+    }
+}
+
+/* Set both the input and output radix at once.  Try to set the output radix
+   first, since it has the most restrictive range.  An radix that is valid as
+   an output radix is also valid as an input radix.
+
+   It may be useful to have an unusual input radix.  If the user wishes to
+   set an input radix that is not valid as an output radix, he needs to use
+   the 'set input-radix' command. */
+
+static void
+set_radix (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  unsigned radix;
+
+  radix = (arg == NULL) ? 10 : parse_and_eval_address (arg);
+  set_output_radix_1 (0, radix);
+  set_input_radix_1 (0, radix);
+  if (from_tty)
+    {
+      printf_filtered ("Input and output radices now set to decimal %u, hex %x, octal %o.\n",
+		       radix, radix, radix);
+    }
+}
+
+/* Show both the input and output radices. */
+
+/*ARGSUSED*/
+static void
+show_radix (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  if (from_tty)
+    {
+      if (input_radix == output_radix)
+	{
+	  printf_filtered ("Input and output radices set to decimal %u, hex %x, octal %o.\n",
+			   input_radix, input_radix, input_radix);
+	}
+      else
+	{
+	  printf_filtered ("Input radix set to decimal %u, hex %x, octal %o.\n",
+			   input_radix, input_radix, input_radix);
+	  printf_filtered ("Output radix set to decimal %u, hex %x, octal %o.\n",
+			   output_radix, output_radix, output_radix);
+	}
+    }
+}
+
+
+/*ARGSUSED*/
+static void
+set_print (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  printf_unfiltered (
+"\"set print\" must be followed by the name of a print subcommand.\n");
+  help_list (setprintlist, "set print ", -1, gdb_stdout);
+}
+
+/*ARGSUSED*/
+static void
+show_print (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  cmd_show_list (showprintlist, from_tty, "");
+}
+
+void
+_initialize_valprint ()
+{
+  struct cmd_list_element *c;
+
+  add_prefix_cmd ("print", no_class, set_print,
+		  "Generic command for setting how things print.",
+		  &setprintlist, "set print ", 0, &setlist);
+  add_alias_cmd ("p", "print", no_class, 1, &setlist); 
+  /* prefer set print to set prompt */ 
+  add_alias_cmd ("pr", "print", no_class, 1, &setlist);
+
+  add_prefix_cmd ("print", no_class, show_print,
+		  "Generic command for showing print settings.",
+		  &showprintlist, "show print ", 0, &showlist);
+  add_alias_cmd ("p", "print", no_class, 1, &showlist); 
+  add_alias_cmd ("pr", "print", no_class, 1, &showlist); 
+
+  add_show_from_set
+    (add_set_cmd ("elements", no_class, var_uinteger, (char *)&print_max,
+		  "Set limit on string chars or array elements to print.\n\
+\"set print elements 0\" causes there to be no limit.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("null-stop", no_class, var_boolean,
+		  (char *)&stop_print_at_null,
+		  "Set printing of char arrays to stop at first null char.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("repeats", no_class, var_uinteger,
+		  (char *)&repeat_count_threshold,
+		  "Set threshold for repeated print elements.\n\
+\"set print repeats 0\" causes all elements to be individually printed.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("pretty", class_support, var_boolean,
+		  (char *)&prettyprint_structs,
+		  "Set prettyprinting of structures.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("union", class_support, var_boolean, (char *)&unionprint,
+		  "Set printing of unions interior to structures.",
+		  &setprintlist),
+     &showprintlist);
+  
+  add_show_from_set
+    (add_set_cmd ("array", class_support, var_boolean,
+		  (char *)&prettyprint_arrays,
+		  "Set prettyprinting of arrays.",
+		  &setprintlist),
+     &showprintlist);
+
+  add_show_from_set
+    (add_set_cmd ("address", class_support, var_boolean, (char *)&addressprint,
+		  "Set printing of addresses.",
+		  &setprintlist),
+     &showprintlist);
+
+  c = add_set_cmd ("input-radix", class_support, var_uinteger,
+		   (char *)&input_radix,
+		  "Set default input radix for entering numbers.",
+		  &setlist);
+  add_show_from_set (c, &showlist);
+  c->function.sfunc = set_input_radix;
+
+  c = add_set_cmd ("output-radix", class_support, var_uinteger,
+		   (char *)&output_radix,
+		  "Set default output radix for printing of values.",
+		  &setlist);
+  add_show_from_set (c, &showlist);
+  c->function.sfunc = set_output_radix;
+
+  /* The "set radix" and "show radix" commands are special in that they are
+     like normal set and show commands but allow two normally independent
+     variables to be either set or shown with a single command.  So the
+     usual add_set_cmd() and add_show_from_set() commands aren't really
+     appropriate. */
+  add_cmd ("radix", class_support, set_radix,
+	   "Set default input and output number radices.\n\
+Use 'set input-radix' or 'set output-radix' to independently set each.\n\
+Without an argument, sets both radices back to the default value of 10.",
+	   &setlist);
+  add_cmd ("radix", class_support, show_radix,
+	   "Show the default input and output number radices.\n\
+Use 'show input-radix' or 'show output-radix' to independently show each.",
+	   &showlist);
+
+  /* Give people the defaults which they are used to.  */
+  prettyprint_structs = 0;
+  prettyprint_arrays = 0;
+  unionprint = 1;
+  addressprint = 1;
+  print_max = PRINT_MAX_DEFAULT;
+}
diff --git a/gdb/valprint.h b/gdb/valprint.h
new file mode 100644
index 0000000..e6edb15
--- /dev/null
+++ b/gdb/valprint.h
@@ -0,0 +1,54 @@
+/* Declarations for value printing routines for GDB, the GNU debugger.
+   Copyright 1986, 1988, 1989, 1991, 1992, 1993, 1994
+             Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+
+extern int prettyprint_arrays;	/* Controls pretty printing of arrays.  */
+extern int prettyprint_structs;	/* Controls pretty printing of structures */
+extern int prettyprint_arrays;	/* Controls pretty printing of arrays.  */
+
+extern int vtblprint;		/* Controls printing of vtbl's */
+extern int unionprint;		/* Controls printing of nested unions.  */
+extern int addressprint;	/* Controls pretty printing of addresses.  */
+extern int objectprint;		/* Controls looking up an object's derived type
+				   using what we find in its vtables.  */
+
+extern unsigned int print_max;	/* Max # of chars for strings/vectors */
+
+extern int output_format;
+
+extern int stop_print_at_null;  /* Stop printing at null char? */
+
+extern void
+val_print_array_elements PARAMS ((struct type *, char *, CORE_ADDR, GDB_FILE *,
+				  int, int, int, enum val_prettyprint,
+				  unsigned int));
+
+extern void
+val_print_type_code_int PARAMS ((struct type *, char *, GDB_FILE *));
+
+extern void
+print_binary_chars PARAMS ((GDB_FILE *, unsigned char *, unsigned int));
+ 
+extern void
+print_octal_chars PARAMS ((GDB_FILE *, unsigned char *, unsigned int));
+ 
+extern void
+print_decimal_chars PARAMS ((GDB_FILE *, unsigned char *, unsigned int));
+
diff --git a/gdb/value.h b/gdb/value.h
new file mode 100644
index 0000000..44c70de
--- /dev/null
+++ b/gdb/value.h
@@ -0,0 +1,568 @@
+/* Definitions for values of C expressions, for GDB.
+   Copyright 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if !defined (VALUE_H)
+#define VALUE_H 1
+
+/*
+ * The structure which defines the type of a value.  It should never
+ * be possible for a program lval value to survive over a call to the inferior
+ * (ie to be put into the history list or an internal variable).
+ */
+enum lval_type {
+  /* Not an lval.  */
+  not_lval,
+  /* In memory.  Could be a saved register.  */
+  lval_memory,
+  /* In a register.  */
+  lval_register,
+  /* In a gdb internal variable.  */
+  lval_internalvar,
+  /* Part of a gdb internal variable (structure field).  */
+  lval_internalvar_component,
+  /* In a register series in a frame not the current one, which may have been
+     partially saved or saved in different places (otherwise would be
+     lval_register or lval_memory).  */
+  lval_reg_frame_relative
+};
+
+struct value
+  {
+    /* Type of value; either not an lval, or one of the various
+       different possible kinds of lval.  */
+    enum lval_type lval;
+    /* Is it modifiable?  Only relevant if lval != not_lval.  */
+    int modifiable;
+    /* Location of value (if lval).  */
+    union
+      {
+	/* Address in inferior or byte of registers structure.  */
+	CORE_ADDR address;
+	/* Pointer to internal variable.  */
+	struct internalvar *internalvar;
+	/* Number of register.  Only used with
+	   lval_reg_frame_relative.  */
+	int regnum;
+      } location;
+    /* Describes offset of a value within lval of a structure in bytes.
+       This is used in retrieving contents from target memory. [Note also
+       the member embedded_offset below.] */
+    int offset;	
+    /* Only used for bitfields; number of bits contained in them.  */
+    int bitsize;
+    /* Only used for bitfields; position of start of field.
+       For BITS_BIG_ENDIAN=0 targets, it is the position of the LSB.
+       For BITS_BIG_ENDIAN=1 targets, it is the position of the MSB. */
+    int bitpos;
+    /* Frame value is relative to.  In practice, this address is only
+       used if the value is stored in several registers in other than
+       the current frame, and these registers have not all been saved
+       at the same place in memory.  This will be described in the
+       lval enum above as "lval_reg_frame_relative".  */
+    CORE_ADDR frame_addr;
+    /* Type of the value.  */
+    struct type *type;
+    /* Type of the enclosing object if this is an embedded subobject.
+       The member embedded_offset gives the real position of the subobject
+       if type is not the same as enclosing_type.
+
+       If the type field is a pointer type, then enclosing_type is 
+       a pointer type pointing to the real (enclosing) type of the target
+       object. */
+    struct type *enclosing_type;
+    /* Values are stored in a chain, so that they can be deleted
+       easily over calls to the inferior.  Values assigned to internal
+       variables or put into the value history are taken off this
+       list.  */
+    struct value *next;
+
+    /* ??? When is this used?  */
+    union {
+      CORE_ADDR memaddr;
+      char *myaddr;
+    } substring_addr;
+
+    /* Register number if the value is from a register.  Is not kept
+       if you take a field of a structure that is stored in a
+       register.  Shouldn't it be?  */
+    short regno;
+    /* If zero, contents of this value are in the contents field.
+       If nonzero, contents are in inferior memory at address
+       in the location.address field plus the offset field
+       (and the lval field should be lval_memory).  */
+    char lazy;
+    /* If nonzero, this is the value of a variable which does not
+       actually exist in the program.  */
+    char optimized_out;
+    /* If this value represents an object that is embedded inside a
+       larger object (e.g., a base subobject in C++), this gives the
+       offset (in bytes) from the start of the contents buffer where
+       the embedded object begins. This is required because some C++
+       runtime implementations lay out objects (especially virtual bases
+       with possibly negative offsets to ancestors).
+       Note: This may be positive or negative! Also note that this offset
+       is not used when retrieving contents from target memory; the entire
+       enclosing object has to be retrieved always, and the offset for
+       that is given by the member offset above. */
+    int embedded_offset;
+    /* If this value represents a pointer to an object that is embedded
+       in another object, this gives the embedded_offset of the object
+       that is pointed to. */
+    int pointed_to_offset;
+    /* The BFD section associated with this value.  */
+    asection *bfd_section;
+    /* Actual contents of the value.  For use of this value; setting
+       it uses the stuff above.  Not valid if lazy is nonzero.
+       Target byte-order.  We force it to be aligned properly for any
+       possible value.  Note that a value therefore extends beyond
+       what is declared here.  */
+    union {
+      long contents[1];
+      double force_double_align;
+      LONGEST force_longlong_align;
+      char *literal_data;
+    } aligner;
+    /* Do not add any new members here -- contents above will trash them */
+  };
+
+typedef struct value *value_ptr;
+
+#define VALUE_TYPE(val) (val)->type
+#define VALUE_ENCLOSING_TYPE(val) (val)->enclosing_type
+#define VALUE_LAZY(val) (val)->lazy
+/* VALUE_CONTENTS and VALUE_CONTENTS_RAW both return the address of
+   the gdb buffer used to hold a copy of the contents of the lval.  
+   VALUE_CONTENTS is used when the contents of the buffer are needed --
+   it uses value_fetch_lazy() to load the buffer from the process being 
+   debugged if it hasn't already been loaded.  VALUE_CONTENTS_RAW is 
+   used when data is being stored into the buffer, or when it is 
+   certain that the contents of the buffer are valid.
+   Note: The contents pointer is adjusted by the offset required to
+   get to the real subobject, if the value happens to represent
+   something embedded in a larger run-time object. */
+
+#define VALUE_CONTENTS_RAW(val) ((char *) (val)->aligner.contents + (val)->embedded_offset)
+#define VALUE_CONTENTS(val) ((void)(VALUE_LAZY(val) && value_fetch_lazy(val)),\
+			     VALUE_CONTENTS_RAW(val))
+
+/* The ALL variants of the above two macros do not adjust the returned
+   pointer by the embedded_offset value. */
+  
+#define VALUE_CONTENTS_ALL_RAW(val) ((char *) (val)->aligner.contents)
+#define VALUE_CONTENTS_ALL(val) ((void) (VALUE_LAZY(val) && value_fetch_lazy(val)),\
+                                 VALUE_CONTENTS_ALL_RAW(val))
+  
+  
+extern int value_fetch_lazy PARAMS ((value_ptr val));
+
+#define VALUE_LVAL(val) (val)->lval
+#define VALUE_ADDRESS(val) (val)->location.address
+#define VALUE_INTERNALVAR(val) (val)->location.internalvar
+#define VALUE_FRAME_REGNUM(val) ((val)->location.regnum)
+#define VALUE_FRAME(val) ((val)->frame_addr)
+#define VALUE_OFFSET(val) (val)->offset
+#define VALUE_BITSIZE(val) (val)->bitsize
+#define VALUE_BITPOS(val) (val)->bitpos
+#define VALUE_NEXT(val) (val)->next
+#define VALUE_REGNO(val) (val)->regno
+#define VALUE_OPTIMIZED_OUT(val) ((val)->optimized_out)
+#define VALUE_EMBEDDED_OFFSET(val) ((val)->embedded_offset)
+#define VALUE_POINTED_TO_OFFSET(val) ((val)->pointed_to_offset)
+#define VALUE_BFD_SECTION(val) ((val)->bfd_section)
+
+/* Convert a REF to the object referenced. */
+
+#define COERCE_REF(arg)    \
+do { struct type *value_type_arg_tmp = check_typedef (VALUE_TYPE (arg));\
+     if (TYPE_CODE (value_type_arg_tmp) == TYPE_CODE_REF)		\
+	 arg = value_at_lazy (TYPE_TARGET_TYPE (value_type_arg_tmp),	\
+			      unpack_long (VALUE_TYPE (arg),		\
+					   VALUE_CONTENTS (arg)),       \
+			      VALUE_BFD_SECTION (arg));			\
+    } while (0)
+
+/* If ARG is an array, convert it to a pointer.
+   If ARG is an enum, convert it to an integer.
+   If ARG is a function, convert it to a function pointer.
+
+   References are dereferenced.  */
+
+#define COERCE_ARRAY(arg)    \
+do { COERCE_REF(arg);							\
+  if (current_language->c_style_arrays					\
+      && TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_ARRAY)		\
+    arg = value_coerce_array (arg);					\
+  if (TYPE_CODE (VALUE_TYPE (arg)) == TYPE_CODE_FUNC)                   \
+    arg = value_coerce_function (arg);                                  \
+} while (0)
+
+#define COERCE_NUMBER(arg)  \
+  do { COERCE_ARRAY(arg);  COERCE_ENUM(arg); } while (0)
+
+#define COERCE_VARYING_ARRAY(arg, real_arg_type)	\
+{ if (chill_varying_type (real_arg_type))  \
+    arg = varying_to_slice (arg), real_arg_type = VALUE_TYPE (arg); }
+
+/* If ARG is an enum, convert it to an integer.  */
+
+#define COERCE_ENUM(arg)   { \
+  if (TYPE_CODE (check_typedef (VALUE_TYPE (arg))) == TYPE_CODE_ENUM)	\
+    arg = value_cast (builtin_type_unsigned_int, arg);			\
+}
+
+/* Internal variables (variables for convenience of use of debugger)
+   are recorded as a chain of these structures.  */
+
+struct internalvar
+{
+  struct internalvar *next;
+  char *name;
+  value_ptr value;
+};
+
+/* Pointer to member function.  Depends on compiler implementation. */
+
+#define METHOD_PTR_IS_VIRTUAL(ADDR)  ((ADDR) & 0x80000000)
+#define METHOD_PTR_FROM_VOFFSET(OFFSET) (0x80000000 + (OFFSET))
+#define METHOD_PTR_TO_VOFFSET(ADDR) (~0x80000000 & (ADDR))
+
+
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "expression.h"
+
+#ifdef __STDC__
+struct frame_info;
+struct fn_field;
+#endif
+
+extern void
+print_address_demangle PARAMS ((CORE_ADDR, GDB_FILE *, int));
+
+extern LONGEST value_as_long PARAMS ((value_ptr val));
+
+extern DOUBLEST value_as_double PARAMS ((value_ptr val));
+
+extern CORE_ADDR value_as_pointer PARAMS ((value_ptr val));
+
+extern LONGEST unpack_long PARAMS ((struct type *type, char *valaddr));
+
+extern DOUBLEST unpack_double PARAMS ((struct type *type, char *valaddr,
+				       int *invp));
+
+extern CORE_ADDR unpack_pointer PARAMS ((struct type *type, char *valaddr));
+
+extern LONGEST unpack_field_as_long PARAMS ((struct type *type, char *valaddr,
+					     int fieldno));
+
+extern value_ptr value_from_longest PARAMS ((struct type *type, LONGEST num));
+
+extern value_ptr value_from_double PARAMS ((struct type *type, DOUBLEST num));
+
+extern value_ptr value_at PARAMS ((struct type *type, CORE_ADDR addr, asection *sect));
+
+extern value_ptr value_at_lazy PARAMS ((struct type *type, CORE_ADDR addr, asection *sect));
+
+extern value_ptr value_from_register PARAMS ((struct type *type, int regnum,
+					  struct frame_info * frame));
+
+extern value_ptr value_of_variable PARAMS ((struct symbol *var,
+					    struct block *b));
+
+extern value_ptr value_of_register PARAMS ((int regnum));
+
+extern int symbol_read_needs_frame PARAMS ((struct symbol *));
+
+extern value_ptr read_var_value PARAMS ((struct symbol *var,
+					 struct frame_info *frame));
+
+extern value_ptr locate_var_value PARAMS ((struct symbol *var,
+				       struct frame_info *frame));
+
+extern value_ptr allocate_value PARAMS ((struct type *type));
+
+extern value_ptr allocate_repeat_value PARAMS ((struct type *type, int count));
+
+extern value_ptr value_mark PARAMS ((void));
+
+extern void value_free_to_mark PARAMS ((value_ptr mark));
+
+extern value_ptr value_string PARAMS ((char *ptr, int len));
+extern value_ptr value_bitstring PARAMS ((char *ptr, int len));
+
+extern value_ptr value_array PARAMS ((int lowbound, int highbound,
+				      value_ptr *elemvec));
+
+extern value_ptr value_concat PARAMS ((value_ptr arg1, value_ptr arg2));
+
+extern value_ptr value_binop PARAMS ((value_ptr arg1, value_ptr arg2,
+				      enum exp_opcode op));
+
+extern value_ptr value_add PARAMS ((value_ptr arg1, value_ptr arg2));
+
+extern value_ptr value_sub PARAMS ((value_ptr arg1, value_ptr arg2));
+
+extern value_ptr value_coerce_array PARAMS ((value_ptr arg1));
+
+extern value_ptr value_coerce_function PARAMS ((value_ptr arg1));
+
+extern value_ptr value_ind PARAMS ((value_ptr arg1));
+
+extern value_ptr value_addr PARAMS ((value_ptr arg1));
+
+extern value_ptr value_assign PARAMS ((value_ptr toval, value_ptr fromval));
+
+extern value_ptr value_neg PARAMS ((value_ptr arg1));
+
+extern value_ptr value_complement PARAMS ((value_ptr arg1));
+
+extern value_ptr value_struct_elt PARAMS ((value_ptr *argp, value_ptr *args,
+					   char *name,
+					   int *static_memfuncp, char *err));
+
+extern value_ptr value_struct_elt_for_reference PARAMS ((struct type *domain,
+							 int offset,
+							 struct type *curtype,
+							 char *name,
+							 struct type *intype));
+
+extern value_ptr value_static_field PARAMS ((struct type *type, int fieldno));
+
+extern struct fn_field *
+value_find_oload_method_list PARAMS ((value_ptr *, char *, int, int *, int *, struct type **, int *));
+
+extern value_ptr value_field PARAMS ((value_ptr arg1, int fieldno));
+
+extern value_ptr value_primitive_field PARAMS ((value_ptr arg1, int offset,
+						int fieldno,
+						struct type *arg_type));
+
+extern struct type *
+value_rtti_type PARAMS ((value_ptr, int *, int *, int *));
+
+extern struct type *
+value_rtti_target_type PARAMS ((value_ptr, int *, int *, int *));
+
+extern value_ptr
+value_full_object PARAMS ((value_ptr, struct type *, int, int, int));
+
+extern value_ptr value_cast PARAMS ((struct type *type, value_ptr arg2));
+
+extern value_ptr value_zero PARAMS ((struct type *type, enum lval_type lv));
+
+extern value_ptr value_repeat PARAMS ((value_ptr arg1, int count));
+
+extern value_ptr value_subscript PARAMS ((value_ptr array, value_ptr idx));
+
+extern value_ptr value_from_vtable_info PARAMS ((value_ptr arg,
+						 struct type *type));
+
+extern value_ptr value_being_returned PARAMS ((struct type *valtype, 
+					       char retbuf[REGISTER_BYTES],
+					       int struct_return));
+
+extern value_ptr value_in PARAMS ((value_ptr element, value_ptr set));
+
+extern int value_bit_index PARAMS ((struct type *type, char *addr, int index));
+
+extern int using_struct_return PARAMS ((value_ptr function, CORE_ADDR funcaddr,
+					struct type *value_type, int gcc_p));
+
+extern void set_return_value PARAMS ((value_ptr val));
+
+extern value_ptr evaluate_expression PARAMS ((struct expression *exp));
+
+extern value_ptr evaluate_type PARAMS ((struct expression *exp));
+
+extern value_ptr evaluate_subexp_with_coercion PARAMS ((struct expression *,
+							int *, enum noside));
+
+extern value_ptr parse_and_eval PARAMS ((char *exp));
+
+extern value_ptr parse_to_comma_and_eval PARAMS ((char **expp));
+
+extern struct type *parse_and_eval_type PARAMS ((char *p, int length));
+
+extern CORE_ADDR parse_and_eval_address PARAMS ((char *exp));
+
+extern CORE_ADDR parse_and_eval_address_1 PARAMS ((char **expptr));
+
+extern value_ptr access_value_history PARAMS ((int num));
+
+extern value_ptr value_of_internalvar PARAMS ((struct internalvar *var));
+
+extern void set_internalvar PARAMS ((struct internalvar *var, value_ptr val));
+
+extern void set_internalvar_component PARAMS ((struct internalvar *var,
+					       int offset,
+					       int bitpos, int bitsize,
+					       value_ptr newvalue));
+
+extern struct internalvar *lookup_internalvar PARAMS ((char *name));
+
+extern int value_equal PARAMS ((value_ptr arg1, value_ptr arg2));
+
+extern int value_less PARAMS ((value_ptr arg1, value_ptr arg2));
+
+extern int value_logical_not PARAMS ((value_ptr arg1));
+
+/* C++ */
+
+extern value_ptr value_of_this PARAMS ((int complain));
+
+extern value_ptr value_x_binop PARAMS ((value_ptr arg1, value_ptr arg2,
+					enum exp_opcode op,
+					enum exp_opcode otherop,
+					enum noside noside));
+
+extern value_ptr value_x_unop PARAMS ((value_ptr arg1, enum exp_opcode op,
+				       enum noside noside));
+
+extern value_ptr value_fn_field PARAMS ((value_ptr *arg1p, struct fn_field *f,
+					 int j,
+					 struct type* type, int offset));
+
+extern value_ptr value_virtual_fn_field PARAMS ((value_ptr *arg1p,
+						 struct fn_field *f, int j,
+						 struct type *type,
+						 int offset));
+
+extern int binop_user_defined_p PARAMS ((enum exp_opcode op,
+					 value_ptr arg1, value_ptr arg2));
+
+extern int unop_user_defined_p PARAMS ((enum exp_opcode op, value_ptr arg1));
+
+extern int destructor_name_p PARAMS ((const char *name,
+				      const struct type *type));
+
+#define value_free(val) free ((PTR)val)
+
+extern void free_all_values PARAMS ((void));
+
+extern void release_value PARAMS ((value_ptr val));
+
+extern int record_latest_value PARAMS ((value_ptr val));
+
+extern void registers_changed PARAMS ((void));
+
+extern void read_register_bytes PARAMS ((int regbyte, char *myaddr, int len));
+
+extern void write_register_bytes PARAMS ((int regbyte, char *myaddr, int len));
+
+extern void
+read_register_gen PARAMS ((int regno, char *myaddr));
+
+extern CORE_ADDR
+read_register PARAMS ((int regno));
+
+extern CORE_ADDR
+read_register_pid PARAMS ((int regno, int pid));
+
+extern void
+write_register PARAMS ((int regno, LONGEST val));
+
+extern void
+write_register_pid PARAMS ((int regno, CORE_ADDR val, int pid));
+
+extern void
+supply_register PARAMS ((int regno, char *val));
+
+extern void
+get_saved_register PARAMS ((char *raw_buffer, int *optimized,
+			    CORE_ADDR *addrp, struct frame_info *frame,
+			    int regnum, enum lval_type *lval));
+
+extern void
+modify_field PARAMS ((char *addr, LONGEST fieldval, int bitpos, int bitsize));
+
+extern void
+type_print PARAMS ((struct type *type, char *varstring, GDB_FILE *stream,
+		    int show));
+
+extern char *baseclass_addr PARAMS ((struct type *type, int index,
+				     char *valaddr,
+				     value_ptr *valuep, int *errp));
+
+extern void
+print_longest PARAMS ((GDB_FILE *stream, int format, int use_local,
+		       LONGEST val));
+
+extern void
+print_floating PARAMS ((char *valaddr, struct type *type, GDB_FILE *stream));
+
+extern int value_print PARAMS ((value_ptr val, GDB_FILE *stream, int format,
+				enum val_prettyprint pretty));
+
+extern void
+value_print_array_elements PARAMS ((value_ptr val, GDB_FILE* stream,
+				    int format, enum val_prettyprint pretty));
+
+extern value_ptr
+value_release_to_mark PARAMS ((value_ptr mark));
+
+extern int
+val_print PARAMS ((struct type *type, char *valaddr, int embedded_offset, CORE_ADDR address,
+		   GDB_FILE *stream, int format, int deref_ref,
+		   int recurse, enum val_prettyprint pretty));
+
+extern int
+val_print_string PARAMS ((CORE_ADDR addr, int len, int width, GDB_FILE *stream));
+
+extern void
+print_variable_value PARAMS ((struct symbol *var, struct frame_info *frame,
+			      GDB_FILE *stream));
+
+extern int check_field PARAMS ((value_ptr, const char *));
+
+extern void
+c_typedef_print PARAMS ((struct type *type, struct symbol *news, GDB_FILE *stream));
+
+extern char *
+internalvar_name PARAMS ((struct internalvar *var));
+
+extern void
+clear_value_history PARAMS ((void));
+
+extern void
+clear_internalvars PARAMS ((void));
+
+/* From values.c */
+
+extern value_ptr value_copy PARAMS ((value_ptr));
+
+extern int baseclass_offset PARAMS ((struct type *, int, char *, CORE_ADDR));
+
+/* From valops.c */
+
+extern value_ptr varying_to_slice PARAMS ((value_ptr));
+
+extern value_ptr value_slice PARAMS ((value_ptr, int, int));
+
+extern value_ptr call_function_by_hand PARAMS ((value_ptr, int, value_ptr *));
+
+extern value_ptr value_literal_complex PARAMS ((value_ptr, value_ptr, struct type*));
+
+extern void find_rt_vbase_offset PARAMS ((struct type *, struct type *, char *, int, int *, int *));
+
+extern value_ptr find_function_in_inferior PARAMS ((char *));
+
+extern value_ptr value_allocate_space_in_inferior PARAMS ((int));
+
+#endif	/* !defined (VALUE_H) */
diff --git a/gdb/values.c b/gdb/values.c
new file mode 100644
index 0000000..c7053b8
--- /dev/null
+++ b/gdb/values.c
@@ -0,0 +1,1623 @@
+/* Low level packing and unpacking of values for GDB, the GNU Debugger.
+   Copyright 1986, 87, 89, 91, 93, 94, 95, 96, 97, 1998
+   Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "value.h"
+#include "gdbcore.h"
+#include "frame.h"
+#include "command.h"
+#include "gdbcmd.h"
+#include "target.h"
+#include "language.h"
+#include "scm-lang.h"
+#include "demangle.h"
+
+/* Prototypes for exported functions. */
+
+void _initialize_values PARAMS ((void));
+
+/* Prototypes for local functions. */
+
+static value_ptr value_headof PARAMS ((value_ptr, struct type *,
+				       struct type *));
+
+static void show_values PARAMS ((char *, int));
+
+static void show_convenience PARAMS ((char *, int));
+
+static int vb_match PARAMS ((struct type *, int, struct type *));
+
+/* The value-history records all the values printed
+   by print commands during this session.  Each chunk
+   records 60 consecutive values.  The first chunk on
+   the chain records the most recent values.
+   The total number of values is in value_history_count.  */
+
+#define VALUE_HISTORY_CHUNK 60
+
+struct value_history_chunk
+{
+  struct value_history_chunk *next;
+  value_ptr values[VALUE_HISTORY_CHUNK];
+};
+
+/* Chain of chunks now in use.  */
+
+static struct value_history_chunk *value_history_chain;
+
+static int value_history_count;	/* Abs number of last entry stored */
+
+/* List of all value objects currently allocated
+   (except for those released by calls to release_value)
+   This is so they can be freed after each command.  */
+
+static value_ptr all_values;
+
+/* Allocate a  value  that has the correct length for type TYPE.  */
+
+value_ptr
+allocate_value (type)
+     struct type *type;
+{
+  register value_ptr val;
+  struct type *atype = check_typedef (type);
+
+  val = (struct value *) xmalloc (sizeof (struct value) + TYPE_LENGTH (atype));
+  VALUE_NEXT (val) = all_values;
+  all_values = val;
+  VALUE_TYPE (val) = type;
+  VALUE_ENCLOSING_TYPE (val) = type;
+  VALUE_LVAL (val) = not_lval;
+  VALUE_ADDRESS (val) = 0;
+  VALUE_FRAME (val) = 0;
+  VALUE_OFFSET (val) = 0;
+  VALUE_BITPOS (val) = 0;
+  VALUE_BITSIZE (val) = 0;
+  VALUE_REGNO (val) = -1;
+  VALUE_LAZY (val) = 0;
+  VALUE_OPTIMIZED_OUT (val) = 0;
+  VALUE_BFD_SECTION (val) = NULL;
+  VALUE_EMBEDDED_OFFSET (val) = 0;
+  VALUE_POINTED_TO_OFFSET (val) = 0;
+  val->modifiable = 1;
+  return val;
+}
+
+/* Allocate a  value  that has the correct length
+   for COUNT repetitions type TYPE.  */
+
+value_ptr
+allocate_repeat_value (type, count)
+     struct type *type;
+     int count;
+{
+  int low_bound = current_language->string_lower_bound; /* ??? */
+  /* FIXME-type-allocation: need a way to free this type when we are
+     done with it.  */
+  struct type *range_type
+    = create_range_type ((struct type *) NULL, builtin_type_int,
+			 low_bound, count + low_bound - 1);
+  /* FIXME-type-allocation: need a way to free this type when we are
+     done with it.  */
+  return allocate_value (create_array_type ((struct type *) NULL,
+					    type, range_type));
+}
+
+/* Return a mark in the value chain.  All values allocated after the
+   mark is obtained (except for those released) are subject to being freed
+   if a subsequent value_free_to_mark is passed the mark.  */
+value_ptr
+value_mark ()
+{
+  return all_values;
+}
+
+/* Free all values allocated since MARK was obtained by value_mark
+   (except for those released).  */
+void
+value_free_to_mark (mark)
+     value_ptr mark;
+{
+  value_ptr val, next;
+
+  for (val = all_values; val && val != mark; val = next)
+    {
+      next = VALUE_NEXT (val);
+      value_free (val);
+    }
+  all_values = val;
+}
+
+/* Free all the values that have been allocated (except for those released).
+   Called after each command, successful or not.  */
+
+void
+free_all_values ()
+{
+  register value_ptr val, next;
+
+  for (val = all_values; val; val = next)
+    {
+      next = VALUE_NEXT (val);
+      value_free (val);
+    }
+
+  all_values = 0;
+}
+
+/* Remove VAL from the chain all_values
+   so it will not be freed automatically.  */
+
+void
+release_value (val)
+     register value_ptr val;
+{
+  register value_ptr v;
+
+  if (all_values == val)
+    {
+      all_values = val->next;
+      return;
+    }
+
+  for (v = all_values; v; v = v->next)
+    {
+      if (v->next == val)
+	{
+	  v->next = val->next;
+	  break;
+	}
+    }
+}
+
+/* Release all values up to mark  */
+value_ptr
+value_release_to_mark (mark)
+     value_ptr mark;
+{
+  value_ptr val, next;
+
+  for (val = next = all_values; next; next = VALUE_NEXT (next))
+    if (VALUE_NEXT (next) == mark)
+      {
+	all_values = VALUE_NEXT (next);
+	VALUE_NEXT (next) = 0;
+	return val;
+      }
+  all_values = 0;
+  return val;
+}
+
+/* Return a copy of the value ARG.
+   It contains the same contents, for same memory address,
+   but it's a different block of storage.  */
+
+value_ptr
+value_copy (arg)
+     value_ptr arg;
+{
+  register struct type *encl_type = VALUE_ENCLOSING_TYPE (arg);
+  register value_ptr val = allocate_value (encl_type);
+  VALUE_TYPE (val) = VALUE_TYPE (arg);
+  VALUE_LVAL (val) = VALUE_LVAL (arg);
+  VALUE_ADDRESS (val) = VALUE_ADDRESS (arg);
+  VALUE_OFFSET (val) = VALUE_OFFSET (arg);
+  VALUE_BITPOS (val) = VALUE_BITPOS (arg);
+  VALUE_BITSIZE (val) = VALUE_BITSIZE (arg);
+  VALUE_FRAME (val) = VALUE_FRAME (arg);
+  VALUE_REGNO (val) = VALUE_REGNO (arg);
+  VALUE_LAZY (val) = VALUE_LAZY (arg);
+  VALUE_OPTIMIZED_OUT (val) = VALUE_OPTIMIZED_OUT (arg);
+  VALUE_EMBEDDED_OFFSET (val) = VALUE_EMBEDDED_OFFSET (arg);
+  VALUE_POINTED_TO_OFFSET (val) = VALUE_POINTED_TO_OFFSET (arg);
+  VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (arg);
+  val->modifiable = arg->modifiable;
+  if (!VALUE_LAZY (val))
+    {
+      memcpy (VALUE_CONTENTS_ALL_RAW (val), VALUE_CONTENTS_ALL_RAW (arg),
+	      TYPE_LENGTH (VALUE_ENCLOSING_TYPE (arg)));
+
+    }
+  return val;
+}
+
+/* Access to the value history.  */
+
+/* Record a new value in the value history.
+   Returns the absolute history index of the entry.
+   Result of -1 indicates the value was not saved; otherwise it is the
+   value history index of this new item.  */
+
+int
+record_latest_value (val)
+     value_ptr val;
+{
+  int i;
+
+  /* We don't want this value to have anything to do with the inferior anymore.
+     In particular, "set $1 = 50" should not affect the variable from which
+     the value was taken, and fast watchpoints should be able to assume that
+     a value on the value history never changes.  */
+  if (VALUE_LAZY (val))
+    value_fetch_lazy (val);
+  /* We preserve VALUE_LVAL so that the user can find out where it was fetched
+     from.  This is a bit dubious, because then *&$1 does not just return $1
+     but the current contents of that location.  c'est la vie...  */
+  val->modifiable = 0;
+  release_value (val);
+
+  /* Here we treat value_history_count as origin-zero
+     and applying to the value being stored now.  */
+
+  i = value_history_count % VALUE_HISTORY_CHUNK;
+  if (i == 0)
+    {
+      register struct value_history_chunk *new
+	= (struct value_history_chunk *)
+	  xmalloc (sizeof (struct value_history_chunk));
+      memset (new->values, 0, sizeof new->values);
+      new->next = value_history_chain;
+      value_history_chain = new;
+    }
+
+  value_history_chain->values[i] = val;
+
+  /* Now we regard value_history_count as origin-one
+     and applying to the value just stored.  */
+
+  return ++value_history_count;
+}
+
+/* Return a copy of the value in the history with sequence number NUM.  */
+
+value_ptr
+access_value_history (num)
+     int num;
+{
+  register struct value_history_chunk *chunk;
+  register int i;
+  register int absnum = num;
+
+  if (absnum <= 0)
+    absnum += value_history_count;
+
+  if (absnum <= 0)
+    {
+      if (num == 0)
+	error ("The history is empty.");
+      else if (num == 1)
+	error ("There is only one value in the history.");
+      else
+	error ("History does not go back to $$%d.", -num);
+    }
+  if (absnum > value_history_count)
+    error ("History has not yet reached $%d.", absnum);
+
+  absnum--;
+
+  /* Now absnum is always absolute and origin zero.  */
+
+  chunk = value_history_chain;
+  for (i = (value_history_count - 1) / VALUE_HISTORY_CHUNK - absnum / VALUE_HISTORY_CHUNK;
+       i > 0; i--)
+    chunk = chunk->next;
+
+  return value_copy (chunk->values[absnum % VALUE_HISTORY_CHUNK]);
+}
+
+/* Clear the value history entirely.
+   Must be done when new symbol tables are loaded,
+   because the type pointers become invalid.  */
+
+void
+clear_value_history ()
+{
+  register struct value_history_chunk *next;
+  register int i;
+  register value_ptr val;
+
+  while (value_history_chain)
+    {
+      for (i = 0; i < VALUE_HISTORY_CHUNK; i++)
+	if ((val = value_history_chain->values[i]) != NULL)
+	  free ((PTR)val);
+      next = value_history_chain->next;
+      free ((PTR)value_history_chain);
+      value_history_chain = next;
+    }
+  value_history_count = 0;
+}
+
+static void
+show_values (num_exp, from_tty)
+     char *num_exp;
+     int from_tty;
+{
+  register int i;
+  register value_ptr val;
+  static int num = 1;
+
+  if (num_exp)
+    {
+	/* "info history +" should print from the stored position.
+	   "info history <exp>" should print around value number <exp>.  */
+      if (num_exp[0] != '+' || num_exp[1] != '\0')
+	num = parse_and_eval_address (num_exp) - 5;
+    }
+  else
+    {
+      /* "info history" means print the last 10 values.  */
+      num = value_history_count - 9;
+    }
+
+  if (num <= 0)
+    num = 1;
+
+  for (i = num; i < num + 10 && i <= value_history_count; i++)
+    {
+      val = access_value_history (i);
+      printf_filtered ("$%d = ", i);
+      value_print (val, gdb_stdout, 0, Val_pretty_default);
+      printf_filtered ("\n");
+    }
+
+  /* The next "info history +" should start after what we just printed.  */
+  num += 10;
+
+  /* Hitting just return after this command should do the same thing as
+     "info history +".  If num_exp is null, this is unnecessary, since
+     "info history +" is not useful after "info history".  */
+  if (from_tty && num_exp)
+    {
+      num_exp[0] = '+';
+      num_exp[1] = '\0';
+    }
+}
+
+/* Internal variables.  These are variables within the debugger
+   that hold values assigned by debugger commands.
+   The user refers to them with a '$' prefix
+   that does not appear in the variable names stored internally.  */
+
+static struct internalvar *internalvars;
+
+/* Look up an internal variable with name NAME.  NAME should not
+   normally include a dollar sign.
+
+   If the specified internal variable does not exist,
+   one is created, with a void value.  */
+
+struct internalvar *
+lookup_internalvar (name)
+     char *name;
+{
+  register struct internalvar *var;
+
+  for (var = internalvars; var; var = var->next)
+    if (STREQ (var->name, name))
+      return var;
+
+  var = (struct internalvar *) xmalloc (sizeof (struct internalvar));
+  var->name = concat (name, NULL);
+  var->value = allocate_value (builtin_type_void);
+  release_value (var->value);
+  var->next = internalvars;
+  internalvars = var;
+  return var;
+}
+
+value_ptr
+value_of_internalvar (var)
+     struct internalvar *var;
+{
+  register value_ptr val;
+
+#ifdef IS_TRAPPED_INTERNALVAR
+  if (IS_TRAPPED_INTERNALVAR (var->name))
+    return VALUE_OF_TRAPPED_INTERNALVAR (var);
+#endif 
+
+  val = value_copy (var->value);
+  if (VALUE_LAZY (val))
+    value_fetch_lazy (val);
+  VALUE_LVAL (val) = lval_internalvar;
+  VALUE_INTERNALVAR (val) = var;
+  return val;
+}
+
+void
+set_internalvar_component (var, offset, bitpos, bitsize, newval)
+     struct internalvar *var;
+     int offset, bitpos, bitsize;
+     value_ptr newval;
+{
+  register char *addr = VALUE_CONTENTS (var->value) + offset;
+
+#ifdef IS_TRAPPED_INTERNALVAR
+  if (IS_TRAPPED_INTERNALVAR (var->name))
+    SET_TRAPPED_INTERNALVAR (var, newval, bitpos, bitsize, offset);
+#endif
+
+  if (bitsize)
+    modify_field (addr, value_as_long (newval),
+		  bitpos, bitsize);
+  else
+    memcpy (addr, VALUE_CONTENTS (newval), TYPE_LENGTH (VALUE_TYPE (newval)));
+}
+
+void
+set_internalvar (var, val)
+     struct internalvar *var;
+     value_ptr val;
+{
+  value_ptr newval;
+
+#ifdef IS_TRAPPED_INTERNALVAR
+  if (IS_TRAPPED_INTERNALVAR (var->name))
+    SET_TRAPPED_INTERNALVAR (var, val, 0, 0, 0);
+#endif
+
+  newval = value_copy (val);
+  newval->modifiable = 1;
+
+  /* Force the value to be fetched from the target now, to avoid problems
+     later when this internalvar is referenced and the target is gone or
+     has changed.  */
+  if (VALUE_LAZY (newval))
+    value_fetch_lazy (newval);
+
+  /* Begin code which must not call error().  If var->value points to
+     something free'd, an error() obviously leaves a dangling pointer.
+     But we also get a danling pointer if var->value points to
+     something in the value chain (i.e., before release_value is
+     called), because after the error free_all_values will get called before
+     long.  */
+  free ((PTR)var->value);
+  var->value = newval;
+  release_value (newval);
+  /* End code which must not call error().  */
+}
+
+char *
+internalvar_name (var)
+     struct internalvar *var;
+{
+  return var->name;
+}
+
+/* Free all internalvars.  Done when new symtabs are loaded,
+   because that makes the values invalid.  */
+
+void
+clear_internalvars ()
+{
+  register struct internalvar *var;
+
+  while (internalvars)
+    {
+      var = internalvars;
+      internalvars = var->next;
+      free ((PTR)var->name);
+      free ((PTR)var->value);
+      free ((PTR)var);
+    }
+}
+
+static void
+show_convenience (ignore, from_tty)
+     char *ignore;
+     int from_tty;
+{
+  register struct internalvar *var;
+  int varseen = 0;
+
+  for (var = internalvars; var; var = var->next)
+    {
+#ifdef IS_TRAPPED_INTERNALVAR
+      if (IS_TRAPPED_INTERNALVAR (var->name))
+	continue;
+#endif
+      if (!varseen)
+	{
+	  varseen = 1;
+	}
+      printf_filtered ("$%s = ", var->name);
+      value_print (var->value, gdb_stdout, 0, Val_pretty_default);
+      printf_filtered ("\n");
+    }
+  if (!varseen)
+    printf_unfiltered ("No debugger convenience variables now defined.\n\
+Convenience variables have names starting with \"$\";\n\
+use \"set\" as in \"set $foo = 5\" to define them.\n");
+}
+
+/* Extract a value as a C number (either long or double).
+   Knows how to convert fixed values to double, or
+   floating values to long.
+   Does not deallocate the value.  */
+
+LONGEST
+value_as_long (val)
+     register value_ptr val;
+{
+  /* This coerces arrays and functions, which is necessary (e.g.
+     in disassemble_command).  It also dereferences references, which
+     I suspect is the most logical thing to do.  */
+  COERCE_ARRAY (val);
+  return unpack_long (VALUE_TYPE (val), VALUE_CONTENTS (val));
+}
+
+DOUBLEST
+value_as_double (val)
+     register value_ptr val;
+{
+  DOUBLEST foo;
+  int inv;
+  
+  foo = unpack_double (VALUE_TYPE (val), VALUE_CONTENTS (val), &inv);
+  if (inv)
+    error ("Invalid floating value found in program.");
+  return foo;
+}
+/* Extract a value as a C pointer.
+   Does not deallocate the value.  */
+CORE_ADDR
+value_as_pointer (val)
+     value_ptr val;
+{
+  /* Assume a CORE_ADDR can fit in a LONGEST (for now).  Not sure
+     whether we want this to be true eventually.  */
+#if 0
+  /* ADDR_BITS_REMOVE is wrong if we are being called for a
+     non-address (e.g. argument to "signal", "info break", etc.), or
+     for pointers to char, in which the low bits *are* significant.  */
+  return ADDR_BITS_REMOVE(value_as_long (val));
+#else
+  return value_as_long (val);
+#endif
+}
+
+/* Unpack raw data (copied from debugee, target byte order) at VALADDR
+   as a long, or as a double, assuming the raw data is described
+   by type TYPE.  Knows how to convert different sizes of values
+   and can convert between fixed and floating point.  We don't assume
+   any alignment for the raw data.  Return value is in host byte order.
+
+   If you want functions and arrays to be coerced to pointers, and
+   references to be dereferenced, call value_as_long() instead.
+
+   C++: It is assumed that the front-end has taken care of
+   all matters concerning pointers to members.  A pointer
+   to member which reaches here is considered to be equivalent
+   to an INT (or some size).  After all, it is only an offset.  */
+
+LONGEST
+unpack_long (type, valaddr)
+     struct type *type;
+     char *valaddr;
+{
+  register enum type_code code = TYPE_CODE (type);
+  register int len = TYPE_LENGTH (type);
+  register int nosign = TYPE_UNSIGNED (type);
+
+  if (current_language->la_language == language_scm
+      && is_scmvalue_type (type))
+    return scm_unpack (type, valaddr, TYPE_CODE_INT);
+
+  switch (code)
+    {
+    case TYPE_CODE_TYPEDEF:
+      return unpack_long (check_typedef (type), valaddr);
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_INT:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_RANGE:
+      if (nosign)
+	return extract_unsigned_integer (valaddr, len);
+      else
+	return extract_signed_integer (valaddr, len);
+
+    case TYPE_CODE_FLT:
+      return extract_floating (valaddr, len);
+
+    case TYPE_CODE_PTR:
+    case TYPE_CODE_REF:
+      /* Assume a CORE_ADDR can fit in a LONGEST (for now).  Not sure
+	 whether we want this to be true eventually.  */
+#ifdef GDB_TARGET_IS_D10V
+      if (len == 2)
+	  return D10V_MAKE_DADDR(extract_address (valaddr, len));
+#endif
+      return extract_address (valaddr, len);
+
+    case TYPE_CODE_MEMBER:
+      error ("not implemented: member types in unpack_long");
+
+    default:
+      error ("Value can't be converted to integer.");
+    }
+  return 0; /* Placate lint.  */
+}
+
+/* Return a double value from the specified type and address.
+   INVP points to an int which is set to 0 for valid value,
+   1 for invalid value (bad float format).  In either case,
+   the returned double is OK to use.  Argument is in target
+   format, result is in host format.  */
+
+DOUBLEST
+unpack_double (type, valaddr, invp)
+     struct type *type;
+     char *valaddr;
+     int *invp;
+{
+  enum type_code code;
+  int len;
+  int nosign;
+
+  *invp = 0;			/* Assume valid.   */
+  CHECK_TYPEDEF (type);
+  code = TYPE_CODE (type);
+  len = TYPE_LENGTH (type);
+  nosign = TYPE_UNSIGNED (type);
+  if (code == TYPE_CODE_FLT)
+    {
+#ifdef INVALID_FLOAT
+      if (INVALID_FLOAT (valaddr, len))
+	{
+	  *invp = 1;
+	  return 1.234567891011121314;
+	}
+#endif
+      return extract_floating (valaddr, len);
+    }
+  else if (nosign)
+    {
+      /* Unsigned -- be sure we compensate for signed LONGEST.  */
+#if !defined (_MSC_VER) || (_MSC_VER > 900)
+      return (ULONGEST) unpack_long (type, valaddr);
+#else
+      /* FIXME!!! msvc22 doesn't support unsigned __int64 -> double */
+      return (LONGEST) unpack_long (type, valaddr);
+#endif /* _MSC_VER */
+    }
+  else
+    {
+      /* Signed -- we are OK with unpack_long.  */
+      return unpack_long (type, valaddr);
+    }
+}
+
+/* Unpack raw data (copied from debugee, target byte order) at VALADDR
+   as a CORE_ADDR, assuming the raw data is described by type TYPE.
+   We don't assume any alignment for the raw data.  Return value is in
+   host byte order.
+
+   If you want functions and arrays to be coerced to pointers, and
+   references to be dereferenced, call value_as_pointer() instead.
+
+   C++: It is assumed that the front-end has taken care of
+   all matters concerning pointers to members.  A pointer
+   to member which reaches here is considered to be equivalent
+   to an INT (or some size).  After all, it is only an offset.  */
+
+CORE_ADDR
+unpack_pointer (type, valaddr)
+     struct type *type;
+     char *valaddr;
+{
+  /* Assume a CORE_ADDR can fit in a LONGEST (for now).  Not sure
+     whether we want this to be true eventually.  */
+  return unpack_long (type, valaddr);
+}
+
+/* Get the value of the FIELDN'th field (which must be static) of TYPE. */
+
+value_ptr
+value_static_field (type, fieldno)
+     struct type *type;
+     int fieldno;
+{
+  CORE_ADDR addr;
+  asection *sect;
+  if (TYPE_FIELD_STATIC_HAS_ADDR (type, fieldno))
+    {
+      addr = TYPE_FIELD_STATIC_PHYSADDR (type, fieldno);
+      sect = NULL;
+    }
+  else
+    {
+      char *phys_name = TYPE_FIELD_STATIC_PHYSNAME (type, fieldno);
+      struct symbol *sym = lookup_symbol (phys_name, 0, VAR_NAMESPACE, 0, NULL);
+      if (sym == NULL)
+	{
+	  /* With some compilers, e.g. HP aCC, static data members are reported
+	     as non-debuggable symbols */ 
+	  struct minimal_symbol * msym = lookup_minimal_symbol (phys_name, NULL, NULL);
+	  if (!msym)
+	    return NULL;
+	  else
+	    {     
+	      addr = SYMBOL_VALUE_ADDRESS (msym);
+	      sect = SYMBOL_BFD_SECTION (msym);
+	    }
+	}
+      else
+	{
+	  addr = SYMBOL_VALUE_ADDRESS (sym);
+	  sect = SYMBOL_BFD_SECTION (sym);
+	}
+      SET_FIELD_PHYSADDR (TYPE_FIELD (type, fieldno), addr);
+    }
+  return value_at (TYPE_FIELD_TYPE (type, fieldno), addr, sect);
+}
+
+/* Given a value ARG1 (offset by OFFSET bytes)
+   of a struct or union type ARG_TYPE,
+   extract and return the value of one of its (non-static) fields.
+   FIELDNO says which field. */
+
+value_ptr
+value_primitive_field (arg1, offset, fieldno, arg_type)
+     register value_ptr arg1;
+     int offset;
+     register int fieldno;
+     register struct type *arg_type;
+{
+  register value_ptr v;
+  register struct type *type;
+
+  CHECK_TYPEDEF (arg_type);
+  type = TYPE_FIELD_TYPE (arg_type, fieldno);
+
+  /* Handle packed fields */
+
+  if (TYPE_FIELD_BITSIZE (arg_type, fieldno))
+    {
+      v = value_from_longest (type,
+			      unpack_field_as_long (arg_type,
+						    VALUE_CONTENTS (arg1)
+						      + offset,
+						    fieldno));
+      VALUE_BITPOS (v) = TYPE_FIELD_BITPOS (arg_type, fieldno) % 8;
+      VALUE_BITSIZE (v) = TYPE_FIELD_BITSIZE (arg_type, fieldno);
+    }
+  else if (fieldno < TYPE_N_BASECLASSES (arg_type))
+    {
+      /* This field is actually a base subobject, so preserve the
+         entire object's contents for later references to virtual
+         bases, etc.  */
+      v = allocate_value (VALUE_ENCLOSING_TYPE (arg1));
+      VALUE_TYPE (v) = arg_type;
+      if (VALUE_LAZY (arg1))
+	VALUE_LAZY (v) = 1;
+      else
+	memcpy (VALUE_CONTENTS_ALL_RAW (v), VALUE_CONTENTS_ALL_RAW (arg1),
+		TYPE_LENGTH (VALUE_ENCLOSING_TYPE (arg1)));
+      VALUE_OFFSET (v) = VALUE_OFFSET (arg1);
+      VALUE_EMBEDDED_OFFSET (v)
+        = offset + 
+          VALUE_EMBEDDED_OFFSET (arg1) + 
+          TYPE_FIELD_BITPOS (arg_type, fieldno) / 8;
+    }
+  else
+    {
+      /* Plain old data member */
+      offset += TYPE_FIELD_BITPOS (arg_type, fieldno) / 8;
+      v = allocate_value (type);
+      if (VALUE_LAZY (arg1))
+	VALUE_LAZY (v) = 1;
+      else
+	memcpy (VALUE_CONTENTS_RAW (v),
+		VALUE_CONTENTS_RAW (arg1) + offset,
+		TYPE_LENGTH (type));
+      VALUE_OFFSET (v) = VALUE_OFFSET (arg1) + offset;
+    }
+  VALUE_LVAL (v) = VALUE_LVAL (arg1);
+  if (VALUE_LVAL (arg1) == lval_internalvar)
+    VALUE_LVAL (v) = lval_internalvar_component;
+  VALUE_ADDRESS (v) = VALUE_ADDRESS (arg1);
+/*  VALUE_OFFSET (v) = VALUE_OFFSET (arg1) + offset
+		     + TYPE_FIELD_BITPOS (arg_type, fieldno) / 8; */
+  return v;
+}
+
+/* Given a value ARG1 of a struct or union type,
+   extract and return the value of one of its (non-static) fields.
+   FIELDNO says which field. */
+
+value_ptr
+value_field (arg1, fieldno)
+     register value_ptr arg1;
+     register int fieldno;
+{
+  return value_primitive_field (arg1, 0, fieldno, VALUE_TYPE (arg1));
+}
+
+/* Return a non-virtual function as a value.
+   F is the list of member functions which contains the desired method.
+   J is an index into F which provides the desired method. */
+
+value_ptr
+value_fn_field (arg1p, f, j, type, offset)
+     value_ptr *arg1p;
+     struct fn_field *f;
+     int j;
+     struct type *type;
+     int offset;
+{
+  register value_ptr v;
+  register struct type *ftype = TYPE_FN_FIELD_TYPE (f, j);
+  struct symbol *sym;
+
+  sym = lookup_symbol (TYPE_FN_FIELD_PHYSNAME (f, j),
+		       0, VAR_NAMESPACE, 0, NULL);
+  if (! sym) 
+	return NULL;
+/*
+	error ("Internal error: could not find physical method named %s",
+		    TYPE_FN_FIELD_PHYSNAME (f, j));
+*/
+  
+  v = allocate_value (ftype);
+  VALUE_ADDRESS (v) = BLOCK_START (SYMBOL_BLOCK_VALUE (sym));
+  VALUE_TYPE (v) = ftype;
+
+  if (arg1p)
+   {
+    if (type != VALUE_TYPE (*arg1p))
+      *arg1p = value_ind (value_cast (lookup_pointer_type (type),
+				      value_addr (*arg1p)));
+
+    /* Move the `this' pointer according to the offset. 
+    VALUE_OFFSET (*arg1p) += offset;
+    */
+    }
+
+  return v;
+}
+
+/* Return a virtual function as a value.
+   ARG1 is the object which provides the virtual function
+   table pointer.  *ARG1P is side-effected in calling this function.
+   F is the list of member functions which contains the desired virtual
+   function.
+   J is an index into F which provides the desired virtual function.
+
+   TYPE is the type in which F is located.  */
+value_ptr
+value_virtual_fn_field (arg1p, f, j, type, offset)
+     value_ptr *arg1p;
+     struct fn_field *f;
+     int j;
+     struct type *type;
+     int offset;
+{
+  value_ptr arg1 = *arg1p;
+  struct type *type1 = check_typedef (VALUE_TYPE (arg1));
+
+  if (TYPE_HAS_VTABLE (type))
+    {
+      /* Deal with HP/Taligent runtime model for virtual functions */
+      value_ptr vp;
+      value_ptr argp;        /* arg1 cast to base */
+      CORE_ADDR vfunc_addr;  /* address of virtual method */
+      CORE_ADDR coreptr;     /* pointer to target address */ 
+      int class_index;       /* which class segment pointer to use */
+      struct type * ftype = TYPE_FN_FIELD_TYPE (f, j);   /* method type */
+
+      argp = value_cast (type, *arg1p);
+
+      if (VALUE_ADDRESS (argp) == 0)
+        error ("Address of object is null; object may not have been created.");
+      
+      /* pai: FIXME -- 32x64 possible problem? */
+      /* First word (4 bytes) in object layout is the vtable pointer */
+      coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (argp)); /* pai: (temp)  */
+                                 /* + offset + VALUE_EMBEDDED_OFFSET (argp)); */ 
+
+      if (!coreptr)
+        error ("Virtual table pointer is null for object; object may not have been created.");
+      
+      /* pai/1997-05-09
+       * FIXME: The code here currently handles only
+       * the non-RRBC case of the Taligent/HP runtime spec; when RRBC
+       * is introduced, the condition for the "if" below will have to
+       * be changed to be a test for the RRBC case.  */
+       
+      if (1)
+        {
+          /* Non-RRBC case; the virtual function pointers are stored at fixed
+           * offsets in the virtual table. */
+
+          /* Retrieve the offset in the virtual table from the debug
+           * info.  The offset of the vfunc's entry is in words from
+           * the beginning of the vtable; but first we have to adjust
+           * by HP_ACC_VFUNC_START to account for other entries */
+          
+          /* pai: FIXME: 32x64 problem here, a word may be 8 bytes in
+           * which case the multiplier should be 8 and values should be long */
+          vp = value_at (builtin_type_int,
+                         coreptr + 4 * (TYPE_FN_FIELD_VOFFSET (f, j) + HP_ACC_VFUNC_START), NULL);
+          
+          coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (vp));
+          /* coreptr now contains the address of the virtual function */
+          /* (Actually, it contains the pointer to the plabel for the function. */
+        }
+      else
+        {
+          /* RRBC case; the virtual function pointers are found by double
+           * indirection through the class segment tables. */
+          
+          /* Choose class segment depending on type we were passed */ 
+          class_index = class_index_in_primary_list (type);
+      
+          /* Find class segment pointer.  These are in the vtable slots after
+           * some other entries, so adjust by HP_ACC_VFUNC_START for that. */
+          /* pai: FIXME 32x64 problem here, if words are 8 bytes long
+           * the multiplier below has to be 8 and value should be long. */
+          vp = value_at (builtin_type_int,
+                         coreptr + 4 * (HP_ACC_VFUNC_START + class_index), NULL);
+          /* Indirect once more, offset by function index */
+          /* pai: FIXME 32x64 problem here, again multiplier could be 8 and value long */
+          coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (vp) + 4 * TYPE_FN_FIELD_VOFFSET (f, j));
+          vp = value_at (builtin_type_int, coreptr, NULL);
+          coreptr = * (CORE_ADDR *) (VALUE_CONTENTS (vp));
+          
+          /* coreptr now contains the address of the virtual function */
+          /* (Actually, it contains the pointer to the plabel for the function.) */
+          
+        }
+
+      if (!coreptr)
+        error ("Address of virtual function is null; error in virtual table?");
+
+      /* Wrap this addr in a value and return pointer */ 
+      vp = allocate_value (ftype);
+      VALUE_TYPE (vp) = ftype;
+      VALUE_ADDRESS (vp) = coreptr;
+      
+      /* pai: (temp) do we need the value_ind stuff in value_fn_field? */
+      return vp;
+    }
+  else  
+    { /* Not using HP/Taligent runtime conventions; so try to
+       * use g++ conventions for virtual table */
+      
+      struct type *entry_type;
+      /* First, get the virtual function table pointer.  That comes
+         with a strange type, so cast it to type `pointer to long' (which
+         should serve just fine as a function type).  Then, index into
+         the table, and convert final value to appropriate function type.  */
+      value_ptr entry, vfn, vtbl;
+      value_ptr vi = value_from_longest (builtin_type_int, 
+                                         (LONGEST) TYPE_FN_FIELD_VOFFSET (f, j));
+      struct type *fcontext = TYPE_FN_FIELD_FCONTEXT (f, j);
+      struct type *context;
+      if (fcontext == NULL)
+       /* We don't have an fcontext (e.g. the program was compiled with
+          g++ version 1).  Try to get the vtbl from the TYPE_VPTR_BASETYPE.
+          This won't work right for multiple inheritance, but at least we
+          should do as well as GDB 3.x did.  */
+        fcontext = TYPE_VPTR_BASETYPE (type);
+      context = lookup_pointer_type (fcontext);
+      /* Now context is a pointer to the basetype containing the vtbl.  */
+      if (TYPE_TARGET_TYPE (context) != type1)
+        {
+	  value_ptr tmp = value_cast (context, value_addr (arg1));
+	  VALUE_POINTED_TO_OFFSET (tmp) = 0;
+          arg1 = value_ind (tmp);
+          type1 = check_typedef (VALUE_TYPE (arg1));
+        }
+
+      context = type1;
+      /* Now context is the basetype containing the vtbl.  */
+
+      /* This type may have been defined before its virtual function table
+         was.  If so, fill in the virtual function table entry for the
+         type now.  */
+      if (TYPE_VPTR_FIELDNO (context) < 0)
+        fill_in_vptr_fieldno (context);
+
+      /* The virtual function table is now an array of structures
+         which have the form { int16 offset, delta; void *pfn; }.  */
+      vtbl = value_primitive_field (arg1, 0, TYPE_VPTR_FIELDNO (context),
+				    TYPE_VPTR_BASETYPE (context));
+      
+      /* With older versions of g++, the vtbl field pointed to an array
+	 of structures.  Nowadays it points directly to the structure. */
+      if (TYPE_CODE (VALUE_TYPE (vtbl)) == TYPE_CODE_PTR
+	  && TYPE_CODE (TYPE_TARGET_TYPE (VALUE_TYPE (vtbl))) == TYPE_CODE_ARRAY)
+	{
+	  /* Handle the case where the vtbl field points to an
+	     array of structures. */
+	  vtbl = value_ind (vtbl);
+
+	  /* Index into the virtual function table.  This is hard-coded because
+	     looking up a field is not cheap, and it may be important to save
+	     time, e.g. if the user has set a conditional breakpoint calling
+	     a virtual function.  */
+	  entry = value_subscript (vtbl, vi);
+	}
+      else
+	{
+	  /* Handle the case where the vtbl field points directly to a structure. */
+	  vtbl = value_add (vtbl, vi);
+	  entry = value_ind (vtbl);
+	}
+
+      entry_type = check_typedef (VALUE_TYPE (entry));
+
+      if (TYPE_CODE (entry_type) == TYPE_CODE_STRUCT)
+        {
+          /* Move the `this' pointer according to the virtual function table. */
+          VALUE_OFFSET (arg1) += value_as_long (value_field (entry, 0));
+
+          if (! VALUE_LAZY (arg1))
+            {
+              VALUE_LAZY (arg1) = 1;
+              value_fetch_lazy (arg1);
+            }
+
+          vfn = value_field (entry, 2);
+        }
+      else if (TYPE_CODE (entry_type) == TYPE_CODE_PTR)
+        vfn = entry;
+      else
+        error ("I'm confused:  virtual function table has bad type");
+      /* Reinstantiate the function pointer with the correct type.  */
+      VALUE_TYPE (vfn) = lookup_pointer_type (TYPE_FN_FIELD_TYPE (f, j));
+
+      *arg1p = arg1;
+      return vfn;
+    }
+}
+
+/* ARG is a pointer to an object we know to be at least
+   a DTYPE.  BTYPE is the most derived basetype that has
+   already been searched (and need not be searched again).
+   After looking at the vtables between BTYPE and DTYPE,
+   return the most derived type we find.  The caller must
+   be satisfied when the return value == DTYPE.
+
+   FIXME-tiemann: should work with dossier entries as well.  */
+
+static value_ptr
+value_headof (in_arg, btype, dtype)
+     value_ptr in_arg;
+     struct type *btype, *dtype;
+{
+  /* First collect the vtables we must look at for this object.  */
+  /* FIXME-tiemann: right now, just look at top-most vtable.  */
+  value_ptr arg, vtbl, entry, best_entry = 0;
+  int i, nelems;
+  int offset, best_offset = 0;
+  struct symbol *sym;
+  CORE_ADDR pc_for_sym;
+  char *demangled_name;
+  struct minimal_symbol *msymbol;
+
+  btype = TYPE_VPTR_BASETYPE (dtype);
+  CHECK_TYPEDEF (btype);
+  arg = in_arg;
+  if (btype != dtype)
+    arg = value_cast (lookup_pointer_type (btype), arg);
+  vtbl = value_ind (value_field (value_ind (arg), TYPE_VPTR_FIELDNO (btype)));
+
+  /* Check that VTBL looks like it points to a virtual function table.  */
+  msymbol = lookup_minimal_symbol_by_pc (VALUE_ADDRESS (vtbl));
+  if (msymbol == NULL
+      || (demangled_name = SYMBOL_NAME (msymbol)) == NULL
+      || !VTBL_PREFIX_P (demangled_name))
+    {
+      /* If we expected to find a vtable, but did not, let the user
+	 know that we aren't happy, but don't throw an error.
+	 FIXME: there has to be a better way to do this.  */
+      struct type *error_type = (struct type *)xmalloc (sizeof (struct type));
+      memcpy (error_type, VALUE_TYPE (in_arg), sizeof (struct type));
+      TYPE_NAME (error_type) = savestring ("suspicious *", sizeof ("suspicious *"));
+      VALUE_TYPE (in_arg) = error_type;
+      return in_arg;
+    }
+
+  /* Now search through the virtual function table.  */
+  entry = value_ind (vtbl);
+  nelems = longest_to_int (value_as_long (value_field (entry, 2)));
+  for (i = 1; i <= nelems; i++)
+    {
+      entry = value_subscript (vtbl, value_from_longest (builtin_type_int, 
+						      (LONGEST) i));
+      /* This won't work if we're using thunks. */
+      if (TYPE_CODE (check_typedef (VALUE_TYPE (entry))) != TYPE_CODE_STRUCT)
+	break;
+      offset = longest_to_int (value_as_long (value_field (entry, 0)));
+      /* If we use '<=' we can handle single inheritance
+       * where all offsets are zero - just use the first entry found. */
+      if (offset <= best_offset)
+	{
+	  best_offset = offset;
+	  best_entry = entry;
+	}
+    }
+  /* Move the pointer according to BEST_ENTRY's offset, and figure
+     out what type we should return as the new pointer.  */
+  if (best_entry == 0)
+    {
+      /* An alternative method (which should no longer be necessary).
+       * But we leave it in for future use, when we will hopefully
+       * have optimizes the vtable to use thunks instead of offsets. */
+      /* Use the name of vtable itself to extract a base type. */
+      demangled_name += 4;  /* Skip _vt$ prefix. */
+    }
+  else
+    {
+      pc_for_sym = value_as_pointer (value_field (best_entry, 2));
+      sym = find_pc_function (pc_for_sym);
+      demangled_name = cplus_demangle (SYMBOL_NAME (sym), DMGL_ANSI);
+      *(strchr (demangled_name, ':')) = '\0';
+    }
+  sym = lookup_symbol (demangled_name, 0, VAR_NAMESPACE, 0, 0);
+  if (sym == NULL)
+    error ("could not find type declaration for `%s'", demangled_name);
+  if (best_entry)
+    {
+      free (demangled_name);
+      arg = value_add (value_cast (builtin_type_int, arg),
+		       value_field (best_entry, 0));
+    }
+  else arg = in_arg;
+  VALUE_TYPE (arg) = lookup_pointer_type (SYMBOL_TYPE (sym));
+  return arg;
+}
+
+/* ARG is a pointer object of type TYPE.  If TYPE has virtual
+   function tables, probe ARG's tables (including the vtables
+   of its baseclasses) to figure out the most derived type that ARG
+   could actually be a pointer to.  */
+
+value_ptr
+value_from_vtable_info (arg, type)
+     value_ptr arg;
+     struct type *type;
+{
+  /* Take care of preliminaries.  */
+  if (TYPE_VPTR_FIELDNO (type) < 0)
+    fill_in_vptr_fieldno (type);
+  if (TYPE_VPTR_FIELDNO (type) < 0)
+    return 0;
+
+  return value_headof (arg, 0, type);
+}
+
+/* Return true if the INDEXth field of TYPE is a virtual baseclass
+   pointer which is for the base class whose type is BASECLASS.  */
+
+static int
+vb_match (type, index, basetype)
+     struct type *type;
+     int index;
+     struct type *basetype;
+{
+  struct type *fieldtype;
+  char *name = TYPE_FIELD_NAME (type, index);
+  char *field_class_name = NULL;
+
+  if (*name != '_')
+    return 0;
+  /* gcc 2.4 uses _vb$.  */
+  if (name[1] == 'v' && name[2] == 'b' && is_cplus_marker (name[3]))
+    field_class_name = name + 4;
+  /* gcc 2.5 will use __vb_.  */
+  if (name[1] == '_' && name[2] == 'v' && name[3] == 'b' && name[4] == '_')
+    field_class_name = name + 5;
+
+  if (field_class_name == NULL)
+    /* This field is not a virtual base class pointer.  */
+    return 0;
+
+  /* It's a virtual baseclass pointer, now we just need to find out whether
+     it is for this baseclass.  */
+  fieldtype = TYPE_FIELD_TYPE (type, index);
+  if (fieldtype == NULL
+      || TYPE_CODE (fieldtype) != TYPE_CODE_PTR)
+    /* "Can't happen".  */
+    return 0;
+
+  /* What we check for is that either the types are equal (needed for
+     nameless types) or have the same name.  This is ugly, and a more
+     elegant solution should be devised (which would probably just push
+     the ugliness into symbol reading unless we change the stabs format).  */
+  if (TYPE_TARGET_TYPE (fieldtype) == basetype)
+    return 1;
+
+  if (TYPE_NAME (basetype) != NULL
+      && TYPE_NAME (TYPE_TARGET_TYPE (fieldtype)) != NULL
+      && STREQ (TYPE_NAME (basetype),
+		TYPE_NAME (TYPE_TARGET_TYPE (fieldtype))))
+    return 1;
+  return 0;
+}
+
+/* Compute the offset of the baseclass which is
+   the INDEXth baseclass of class TYPE,
+   for value at VALADDR (in host) at ADDRESS (in target).
+   The result is the offset of the baseclass value relative
+   to (the address of)(ARG) + OFFSET.
+
+   -1 is returned on error. */
+
+int
+baseclass_offset (type, index, valaddr, address)
+     struct type *type;
+     int index;
+     char *valaddr;
+     CORE_ADDR address;
+{
+  struct type *basetype = TYPE_BASECLASS (type, index);
+
+  if (BASETYPE_VIA_VIRTUAL (type, index))
+    {
+      /* Must hunt for the pointer to this virtual baseclass.  */
+      register int i, len = TYPE_NFIELDS (type);
+      register int n_baseclasses = TYPE_N_BASECLASSES (type);
+
+      /* First look for the virtual baseclass pointer
+	 in the fields.  */
+      for (i = n_baseclasses; i < len; i++)
+	{
+	  if (vb_match (type, i, basetype))
+	    {
+	      CORE_ADDR addr
+		= unpack_pointer (TYPE_FIELD_TYPE (type, i),
+				  valaddr + (TYPE_FIELD_BITPOS (type, i) / 8));
+
+	      return addr - (LONGEST) address;
+	    }
+	}
+      /* Not in the fields, so try looking through the baseclasses.  */
+      for (i = index+1; i < n_baseclasses; i++)
+	{
+	  int boffset =
+	      baseclass_offset (type, i, valaddr, address);
+	  if (boffset)
+	    return boffset;
+	}
+      /* Not found.  */
+      return -1;
+    }
+
+  /* Baseclass is easily computed.  */
+  return TYPE_BASECLASS_BITPOS (type, index) / 8;
+}
+
+/* Unpack a field FIELDNO of the specified TYPE, from the anonymous object at
+   VALADDR.
+
+   Extracting bits depends on endianness of the machine.  Compute the
+   number of least significant bits to discard.  For big endian machines,
+   we compute the total number of bits in the anonymous object, subtract
+   off the bit count from the MSB of the object to the MSB of the
+   bitfield, then the size of the bitfield, which leaves the LSB discard
+   count.  For little endian machines, the discard count is simply the
+   number of bits from the LSB of the anonymous object to the LSB of the
+   bitfield.
+
+   If the field is signed, we also do sign extension. */
+
+LONGEST
+unpack_field_as_long (type, valaddr, fieldno)
+     struct type *type;
+     char *valaddr;
+     int fieldno;
+{
+  ULONGEST val;
+  ULONGEST valmask;
+  int bitpos = TYPE_FIELD_BITPOS (type, fieldno);
+  int bitsize = TYPE_FIELD_BITSIZE (type, fieldno);
+  int lsbcount;
+  struct type *field_type;
+
+  val = extract_unsigned_integer (valaddr + bitpos / 8, sizeof (val));
+  field_type = TYPE_FIELD_TYPE (type, fieldno);
+  CHECK_TYPEDEF (field_type);
+
+  /* Extract bits.  See comment above. */
+
+  if (BITS_BIG_ENDIAN)
+    lsbcount = (sizeof val * 8 - bitpos % 8 - bitsize);
+  else
+    lsbcount = (bitpos % 8);
+  val >>= lsbcount;
+
+  /* If the field does not entirely fill a LONGEST, then zero the sign bits.
+     If the field is signed, and is negative, then sign extend. */
+
+  if ((bitsize > 0) && (bitsize < 8 * (int) sizeof (val)))
+    {
+      valmask = (((ULONGEST) 1) << bitsize) - 1;
+      val &= valmask;
+      if (!TYPE_UNSIGNED (field_type))
+	{
+	  if (val & (valmask ^ (valmask >> 1)))
+	    {
+	      val |= ~valmask;
+	    }
+	}
+    }
+  return (val);
+}
+
+/* Modify the value of a bitfield.  ADDR points to a block of memory in
+   target byte order; the bitfield starts in the byte pointed to.  FIELDVAL
+   is the desired value of the field, in host byte order.  BITPOS and BITSIZE
+   indicate which bits (in target bit order) comprise the bitfield.  */
+
+void
+modify_field (addr, fieldval, bitpos, bitsize)
+     char *addr;
+     LONGEST fieldval;
+     int bitpos, bitsize;
+{
+  LONGEST oword;
+
+  /* If a negative fieldval fits in the field in question, chop
+     off the sign extension bits.  */
+  if (bitsize < (8 * (int) sizeof (fieldval))
+      && (~fieldval & ~((1 << (bitsize - 1)) - 1)) == 0)
+    fieldval = fieldval & ((1 << bitsize) - 1);
+
+  /* Warn if value is too big to fit in the field in question.  */
+  if (bitsize < (8 * (int) sizeof (fieldval))
+      && 0 != (fieldval & ~((1<<bitsize)-1)))
+    {
+      /* FIXME: would like to include fieldval in the message, but
+	 we don't have a sprintf_longest.  */
+      warning ("Value does not fit in %d bits.", bitsize);
+
+      /* Truncate it, otherwise adjoining fields may be corrupted.  */
+      fieldval = fieldval & ((1 << bitsize) - 1);
+    }
+
+  oword = extract_signed_integer (addr, sizeof oword);
+
+  /* Shifting for bit field depends on endianness of the target machine.  */
+  if (BITS_BIG_ENDIAN)
+    bitpos = sizeof (oword) * 8 - bitpos - bitsize;
+
+  /* Mask out old value, while avoiding shifts >= size of oword */
+  if (bitsize < 8 * (int) sizeof (oword))
+    oword &= ~(((((ULONGEST)1) << bitsize) - 1) << bitpos);
+  else
+    oword &= ~((~(ULONGEST)0) << bitpos);
+  oword |= fieldval << bitpos;
+
+  store_signed_integer (addr, sizeof oword, oword);
+}
+
+/* Convert C numbers into newly allocated values */
+
+value_ptr
+value_from_longest (type, num)
+     struct type *type;
+     register LONGEST num;
+{
+  register value_ptr val = allocate_value (type);
+  register enum type_code code;
+  register int len;
+ retry:
+  code = TYPE_CODE (type);
+  len = TYPE_LENGTH (type);
+
+  switch (code)
+    {
+    case TYPE_CODE_TYPEDEF:
+      type = check_typedef (type);
+      goto retry;
+    case TYPE_CODE_INT:
+    case TYPE_CODE_CHAR:
+    case TYPE_CODE_ENUM:
+    case TYPE_CODE_BOOL:
+    case TYPE_CODE_RANGE:
+      store_signed_integer (VALUE_CONTENTS_RAW (val), len, num);
+      break;
+      
+    case TYPE_CODE_REF:
+    case TYPE_CODE_PTR:
+      /* This assumes that all pointers of a given length
+	 have the same form.  */
+      store_address (VALUE_CONTENTS_RAW (val), len, (CORE_ADDR) num);
+      break;
+      
+    default:
+      error ("Unexpected type (%d) encountered for integer constant.", code);
+    }
+  return val;
+}
+
+value_ptr
+value_from_double (type, num)
+     struct type *type;
+     DOUBLEST num;
+{
+  register value_ptr val = allocate_value (type);
+  struct type *base_type = check_typedef (type);
+  register enum type_code code = TYPE_CODE (base_type);
+  register int len = TYPE_LENGTH (base_type);
+
+  if (code == TYPE_CODE_FLT)
+    {
+      store_floating (VALUE_CONTENTS_RAW (val), len, num);
+    }
+  else
+    error ("Unexpected type encountered for floating constant.");
+
+  return val;
+}
+
+/* Deal with the value that is "about to be returned".  */
+
+/* Return the value that a function returning now
+   would be returning to its caller, assuming its type is VALTYPE.
+   RETBUF is where we look for what ought to be the contents
+   of the registers (in raw form).  This is because it is often
+   desirable to restore old values to those registers
+   after saving the contents of interest, and then call
+   this function using the saved values.
+   struct_return is non-zero when the function in question is
+   using the structure return conventions on the machine in question;
+   0 when it is using the value returning conventions (this often
+   means returning pointer to where structure is vs. returning value). */
+
+value_ptr
+value_being_returned (valtype, retbuf, struct_return)
+     register struct type *valtype;
+     char retbuf[REGISTER_BYTES];
+     int struct_return;
+     /*ARGSUSED*/
+{
+  register value_ptr val;
+  CORE_ADDR addr;
+
+#if defined (EXTRACT_STRUCT_VALUE_ADDRESS)
+  /* If this is not defined, just use EXTRACT_RETURN_VALUE instead.  */
+  if (struct_return) {
+    addr = EXTRACT_STRUCT_VALUE_ADDRESS (retbuf);
+    if (!addr)
+      error ("Function return value unknown");
+    return value_at (valtype, addr, NULL);
+  }
+#endif
+
+  val = allocate_value (valtype);
+  CHECK_TYPEDEF (valtype);
+  EXTRACT_RETURN_VALUE (valtype, retbuf, VALUE_CONTENTS_RAW (val));
+
+  return val;
+}
+
+/* Should we use EXTRACT_STRUCT_VALUE_ADDRESS instead of
+   EXTRACT_RETURN_VALUE?  GCC_P is true if compiled with gcc
+   and TYPE is the type (which is known to be struct, union or array).
+
+   On most machines, the struct convention is used unless we are
+   using gcc and the type is of a special size.  */
+/* As of about 31 Mar 93, GCC was changed to be compatible with the
+   native compiler.  GCC 2.3.3 was the last release that did it the
+   old way.  Since gcc2_compiled was not changed, we have no
+   way to correctly win in all cases, so we just do the right thing
+   for gcc1 and for gcc2 after this change.  Thus it loses for gcc
+   2.0-2.3.3.  This is somewhat unfortunate, but changing gcc2_compiled
+   would cause more chaos than dealing with some struct returns being
+   handled wrong.  */
+
+int
+generic_use_struct_convention (gcc_p, value_type)
+     int gcc_p;
+     struct type *value_type;
+{     
+  return !((gcc_p == 1)
+	    && (TYPE_LENGTH (value_type) == 1
+		|| TYPE_LENGTH (value_type) == 2
+		|| TYPE_LENGTH (value_type) == 4
+		|| TYPE_LENGTH (value_type) == 8));
+}
+
+#ifndef USE_STRUCT_CONVENTION
+#define USE_STRUCT_CONVENTION(gcc_p,type) generic_use_struct_convention (gcc_p, type)
+#endif
+
+/* Some fundamental types (such as long double) are returned on the stack for
+   certain architectures.  This macro should return true for any type besides
+   struct, union or array that gets returned on the stack.  */
+
+#ifndef RETURN_VALUE_ON_STACK
+#define RETURN_VALUE_ON_STACK(TYPE) 0
+#endif
+
+/* Return true if the function specified is using the structure returning
+   convention on this machine to return arguments, or 0 if it is using
+   the value returning convention.  FUNCTION is the value representing
+   the function, FUNCADDR is the address of the function, and VALUE_TYPE
+   is the type returned by the function.  GCC_P is nonzero if compiled
+   with GCC.  */
+
+int
+using_struct_return (function, funcaddr, value_type, gcc_p)
+     value_ptr function;
+     CORE_ADDR funcaddr;
+     struct type *value_type;
+     int gcc_p;
+     /*ARGSUSED*/
+{
+  register enum type_code code = TYPE_CODE (value_type);
+
+  if (code == TYPE_CODE_ERROR)
+    error ("Function return type unknown.");
+
+  if (code == TYPE_CODE_STRUCT
+      || code == TYPE_CODE_UNION
+      || code == TYPE_CODE_ARRAY
+      || RETURN_VALUE_ON_STACK (value_type))
+    return USE_STRUCT_CONVENTION (gcc_p, value_type);
+
+  return 0;
+}
+
+/* Store VAL so it will be returned if a function returns now.
+   Does not verify that VAL's type matches what the current
+   function wants to return.  */
+
+void
+set_return_value (val)
+     value_ptr val;
+{
+  struct type *type = check_typedef (VALUE_TYPE (val));
+  register enum type_code code = TYPE_CODE (type);
+
+  if (code == TYPE_CODE_ERROR)
+    error ("Function return type unknown.");
+
+  if (   code == TYPE_CODE_STRUCT
+      || code == TYPE_CODE_UNION)	/* FIXME, implement struct return.  */
+    error ("GDB does not support specifying a struct or union return value.");
+
+  STORE_RETURN_VALUE (type, VALUE_CONTENTS (val));
+}
+
+void
+_initialize_values ()
+{
+  add_cmd ("convenience", no_class, show_convenience,
+	    "Debugger convenience (\"$foo\") variables.\n\
+These variables are created when you assign them values;\n\
+thus, \"print $foo=1\" gives \"$foo\" the value 1.  Values may be any type.\n\n\
+A few convenience variables are given values automatically:\n\
+\"$_\"holds the last address examined with \"x\" or \"info lines\",\n\
+\"$__\" holds the contents of the last address examined with \"x\".",
+	   &showlist);
+
+  add_cmd ("values", no_class, show_values,
+	   "Elements of value history around item number IDX (or last ten).",
+	   &showlist);
+}
diff --git a/gdb/vax-tdep.c b/gdb/vax-tdep.c
new file mode 100644
index 0000000..b378571
--- /dev/null
+++ b/gdb/vax-tdep.c
@@ -0,0 +1,263 @@
+/* Print VAX instructions for GDB, the GNU debugger.
+   Copyright 1986, 1989, 1991, 1992, 1996 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "symtab.h"
+#include "opcode/vax.h"
+
+/* Vax instructions are never longer than this.  */
+#define MAXLEN 62
+
+/* Number of elements in the opcode table.  */
+#define NOPCODES (sizeof votstrs / sizeof votstrs[0])
+
+static unsigned char *print_insn_arg ();
+
+/* Print the vax instruction at address MEMADDR in debugged memory,
+   from disassembler info INFO.
+   Returns length of the instruction, in bytes.  */
+
+static int
+vax_print_insn (memaddr, info)
+     CORE_ADDR memaddr;
+     disassemble_info *info;
+{
+  unsigned char buffer[MAXLEN];
+  register int i;
+  register unsigned char *p;
+  register char *d;
+
+  int status = (*info->read_memory_func) (memaddr, buffer, MAXLEN, info);
+  if (status != 0)
+    {
+      (*info->memory_error_func) (status, memaddr, info);
+      return -1;
+    }
+
+  for (i = 0; i < NOPCODES; i++)
+    if (votstrs[i].detail.code == buffer[0]
+	|| votstrs[i].detail.code == *(unsigned short *)buffer)
+      break;
+
+  /* Handle undefined instructions.  */
+  if (i == NOPCODES)
+    {
+      (*info->fprintf_func) (info->stream, "0%o", buffer[0]);
+      return 1;
+    }
+
+  (*info->fprintf_func) (info->stream, "%s", votstrs[i].name);
+
+  /* Point at first byte of argument data,
+     and at descriptor for first argument.  */
+  p = buffer + 1 + (votstrs[i].detail.code >= 0x100);
+  d = votstrs[i].detail.args;
+
+  if (*d)
+    (*info->fprintf_func) (info->stream, " ");
+
+  while (*d)
+    {
+      p = print_insn_arg (d, p, memaddr + (p - buffer), info);
+      d += 2;
+      if (*d)
+	(*info->fprintf_func) (info->stream, ",");
+    }
+  return p - buffer;
+}
+
+static unsigned char *
+print_insn_arg (d, p, addr, info)
+     char *d;
+     register char *p;
+     CORE_ADDR addr;
+     disassemble_info *info;
+{
+  register int regnum = *p & 0xf;
+  float floatlitbuf;
+
+  if (*d == 'b')
+    {
+      if (d[1] == 'b')
+	(*info->fprintf_func) (info->stream, "0x%x", addr + *p++ + 1);
+      else
+	{
+	  (*info->fprintf_func) (info->stream, "0x%x", addr + *(short *)p + 2);
+	  p += 2;
+	}
+    }
+  else
+    switch ((*p++ >> 4) & 0xf)
+      {
+      case 0:
+      case 1:
+      case 2:
+      case 3:			/* Literal mode */
+	if (d[1] == 'd' || d[1] == 'f' || d[1] == 'g' || d[1] == 'h')
+	  {
+	    *(int *)&floatlitbuf = 0x4000 + ((p[-1] & 0x3f) << 4);
+	    (*info->fprintf_func) (info->stream, "$%f", floatlitbuf);
+	  }
+	else
+	  (*info->fprintf_func) (info->stream, "$%d", p[-1] & 0x3f);
+	break;
+
+      case 4:			/* Indexed */
+	p = (char *) print_insn_arg (d, p, addr + 1, info);
+	(*info->fprintf_func) (info->stream, "[%s]", REGISTER_NAME (regnum));
+	break;
+
+      case 5:			/* Register */
+	(*info->fprintf_func) (info->stream, REGISTER_NAME (regnum));
+	break;
+
+      case 7:			/* Autodecrement */
+	(*info->fprintf_func) (info->stream, "-");
+      case 6:			/* Register deferred */
+	(*info->fprintf_func) (info->stream, "(%s)", REGISTER_NAME (regnum));
+	break;
+
+      case 9:			/* Autoincrement deferred */
+	(*info->fprintf_func) (info->stream, "@");
+	if (regnum == PC_REGNUM)
+	  {
+	    (*info->fprintf_func) (info->stream, "#");
+	    info->target = *(long *)p;
+	    (*info->print_address_func) (info->target, info);
+	    p += 4;
+	    break;
+	  }
+      case 8:			/* Autoincrement */
+	if (regnum == PC_REGNUM)
+	  {
+	    (*info->fprintf_func) (info->stream, "#");
+	    switch (d[1])
+	      {
+	      case 'b':
+		(*info->fprintf_func) (info->stream, "%d", *p++);
+		break;
+
+	      case 'w':
+		(*info->fprintf_func) (info->stream, "%d", *(short *)p);
+		p += 2;
+		break;
+
+	      case 'l':
+		(*info->fprintf_func) (info->stream, "%d", *(long *)p);
+		p += 4;
+		break;
+
+	      case 'q':
+		(*info->fprintf_func) (info->stream, "0x%x%08x",
+				       ((long *)p)[1], ((long *)p)[0]);
+		p += 8;
+		break;
+
+	      case 'o':
+		(*info->fprintf_func) (info->stream, "0x%x%08x%08x%08x",
+				       ((long *)p)[3], ((long *)p)[2],
+				       ((long *)p)[1], ((long *)p)[0]);
+		p += 16;
+		break;
+
+	      case 'f':
+		if (INVALID_FLOAT (p, 4))
+		  (*info->fprintf_func) (info->stream,
+					 "<<invalid float 0x%x>>",
+					 *(int *) p);
+		else
+		  (*info->fprintf_func) (info->stream, "%f", *(float *) p);
+		p += 4;
+		break;
+
+	      case 'd':
+		if (INVALID_FLOAT (p, 8))
+		  (*info->fprintf_func) (info->stream,
+					 "<<invalid float 0x%x%08x>>",
+					 ((long *)p)[1], ((long *)p)[0]);
+		else
+		  (*info->fprintf_func) (info->stream, "%f", *(double *) p);
+		p += 8;
+		break;
+
+	      case 'g':
+		(*info->fprintf_func) (info->stream, "g-float");
+		p += 8;
+		break;
+
+	      case 'h':
+		(*info->fprintf_func) (info->stream, "h-float");
+		p += 16;
+		break;
+
+	      }
+	  }
+	else
+	  (*info->fprintf_func) (info->stream, "(%s)+", REGISTER_NAME (regnum));
+	break;
+
+      case 11:			/* Byte displacement deferred */
+	(*info->fprintf_func) (info->stream, "@");
+      case 10:			/* Byte displacement */
+	if (regnum == PC_REGNUM)
+	  {
+	    info->target = addr + *p + 2;
+	    (*info->print_address_func) (info->target, info);
+	  }
+	else
+	  (*info->fprintf_func) (info->stream, "%d(%s)", *p, REGISTER_NAME (regnum));
+	p += 1;
+	break;
+
+      case 13:			/* Word displacement deferred */
+	(*info->fprintf_func) (info->stream, "@");
+      case 12:			/* Word displacement */
+	if (regnum == PC_REGNUM)
+	  {
+	    info->target = addr + *(short *)p + 3;
+	    (*info->print_address_func) (info->target, info);
+	  }
+	else
+	  (*info->fprintf_func) (info->stream, "%d(%s)",
+				 *(short *)p, REGISTER_NAME (regnum));
+	p += 2;
+	break;
+
+      case 15:			/* Long displacement deferred */
+	(*info->fprintf_func) (info->stream, "@");
+      case 14:			/* Long displacement */
+	if (regnum == PC_REGNUM)
+	  {
+	    info->target = addr + *(short *)p + 5;
+	    (*info->print_address_func) (info->target, info);
+	  }
+	else
+	  (*info->fprintf_func) (info->stream, "%d(%s)",
+				 *(long *)p, REGISTER_NAME (regnum));
+	p += 4;
+      }
+
+  return (unsigned char *) p;
+}
+
+void
+_initialize_vax_tdep ()
+{
+  tm_print_insn = vax_print_insn;
+}
diff --git a/gdb/vx-share/README b/gdb/vx-share/README
new file mode 100644
index 0000000..924b668
--- /dev/null
+++ b/gdb/vx-share/README
@@ -0,0 +1,7 @@
+The files in this directory are shared with Wind River Systems' VxWorks
+debug stub.  This stub runs in the realtime system, as a process, and
+waits for net connections from GDB's and DBX's and such.
+
+Do not change these files without coordinating with Wind River Systems
+in Alameda, California.  Talk to postmaster@wrs.com to find out who 
+currently maintains GDB for them.
diff --git a/gdb/vx-share/dbgRpcLib.h b/gdb/vx-share/dbgRpcLib.h
new file mode 100644
index 0000000..e858e55
--- /dev/null
+++ b/gdb/vx-share/dbgRpcLib.h
@@ -0,0 +1,32 @@
+/*  Copyright 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc.
+
+   dbgRpcLib.h - header file for remote debugging via rpc */
+
+/*
+modification history
+--------------------
+01b,04oct90,maf  added VX_BOOT_FILE_INQ.
+01a,05jun90,llk  extracted from xdr_dbx.h.
+*/
+
+#ifndef INCdbxRpcLibh
+#define INCdbxRpcLibh	1
+
+#define PROCESS_START		50
+#define PROCESS_WAIT		51
+#define VX_STATE_INQ		60
+#define VX_LOAD			61
+#define VX_SYMBOL_INQ		62
+#define VX_BREAK_ADD		63
+#define VX_BREAK_DELETE		64
+#define VX_FP_INQUIRE		65
+#define VX_TASK_SUSPEND		66
+#define VX_CALL_FUNC		67
+#define VX_CONV_FROM_68881	68
+#define VX_CONV_TO_68881	69
+#define VX_BOOT_FILE_INQ	70
+#define	VX_SOURCE_STEP		71
+
+#endif INCdbxRpcLibh
diff --git a/gdb/vx-share/ptrace.h b/gdb/vx-share/ptrace.h
new file mode 100644
index 0000000..8e3554f
--- /dev/null
+++ b/gdb/vx-share/ptrace.h
@@ -0,0 +1,44 @@
+/*	@(#)ptrace.h 1.1 86/07/07 SMI	*/
+
+/*
+ * Copyright (c) 1985 by Sun Microsystems, Inc.
+ */
+
+/*
+modification history
+--------------------
+01a,05jun90,llk  borrowed.
+*/
+
+#ifndef _PTRACE_
+#define _PTRACE_
+
+/*
+ * Request values for the ptrace system call
+ */
+enum ptracereq {
+	PTRACE_TRACEME = 0,		/* 0, by tracee to begin tracing */
+	PTRACE_CHILDDONE = 0,		/* 0, tracee is done with his half */
+	PTRACE_PEEKTEXT,		/* 1, read word from text segment */
+	PTRACE_PEEKDATA,		/* 2, read word from data segment */
+	PTRACE_PEEKUSER,		/* 3, read word from user struct */
+	PTRACE_POKETEXT,		/* 4, write word into text segment */
+	PTRACE_POKEDATA,		/* 5, write word into data segment */
+	PTRACE_POKEUSER,		/* 6, write word into user struct */
+	PTRACE_CONT,			/* 7, continue process */
+	PTRACE_KILL,			/* 8, terminate process */
+	PTRACE_SINGLESTEP,		/* 9, single step process */
+	PTRACE_ATTACH,			/* 10, attach to an existing process */
+	PTRACE_DETACH,			/* 11, detach from a process */
+	PTRACE_GETREGS,			/* 12, get all registers */
+	PTRACE_SETREGS,			/* 13, set all registers */
+	PTRACE_GETFPREGS,		/* 14, get all floating point regs */
+	PTRACE_SETFPREGS,		/* 15, set all floating point regs */
+	PTRACE_READDATA,		/* 16, read data segment */
+	PTRACE_WRITEDATA,		/* 17, write data segment */
+	PTRACE_READTEXT,		/* 18, read text segment */
+	PTRACE_WRITETEXT,		/* 19, write text segment */
+	PTRACE_GETFPAREGS,		/* 20, get all fpa regs */
+	PTRACE_SETFPAREGS		/* 21, set all fpa regs */
+};
+#endif !_PTRACE
diff --git a/gdb/vx-share/regPacket.h b/gdb/vx-share/regPacket.h
new file mode 100644
index 0000000..6160c84
--- /dev/null
+++ b/gdb/vx-share/regPacket.h
@@ -0,0 +1,160 @@
+/*  regPacket.h - register packet definitions for rdb */
+
+/* Copyright 1992-1993 Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01d,30nov93,pad  Added Am29K target definitions.
+01c,14jun93,maf  additional definitions for documentation purposes.
+		 fixed reversal of MIPS_R_LO and MIPS_R_HI.
+01b,08feb93,scy  added SPARC target definitions. changed to WRS code convetion.
+01a,20feb92,j_w  created.
+*/
+
+#ifndef __INCregPacketh
+#define __INCregPacketh
+
+
+/* MC68K */
+
+#define MC68K_GREG_SIZE		0x04	/* size of general-purpose reg */
+#define MC68K_GREG_PLEN		0x48	/* size of general-purpose reg block */
+
+/* offsets into general-purpose register block */
+
+#define MC68K_R_D0		0x00	/* d0; d1 - d7 follow in sequence */
+#define MC68K_R_A0		0x20	/* a0; a1 - a7 follow in sequence */
+#define MC68K_R_SR		0x40	/* sr (represented as a 4-byte val) */
+#define MC68K_R_PC		0x44	/* pc */
+
+#define MC68K_FPREG_SIZE	0x0c	/* size of floating-point data reg */
+#define MC68K_FPREG_PLEN  	0x6c	/* size of floating-point reg block */
+
+/* offsets into floating-point register block */
+
+#define MC68K_R_FP0		0x00	/* fp0; fp1 - fp7 follow in sequence */
+#define MC68K_R_FPCR		0x60	/* fpcr */
+#define MC68K_R_FPSR		0x64	/* fpsr */
+#define MC68K_R_FPIAR		0x68	/* fpiar */
+
+
+/* I960 */
+
+#define I960_GREG_SIZE		0x04	/* size of general-purpose reg */
+#define I960_GREG_PLEN		0x8c	/* size of general-purpose reg block */
+
+/* offsets into general-purpose register block */
+
+#define I960_R_R0		0x00	/* r0; r1 - r15 follow in sequence */
+#define I960_R_G0		0x40	/* g0; g1 - g15 follow in sequence */
+#define I960_R_PCW		0x80	/* pcw */
+#define I960_R_ACW		0x84	/* acw */
+#define I960_R_TCW		0x88	/* tcw */
+
+#define I960_FPREG_SIZE		0x10	/* size of floating-point reg */
+#define I960_FPREG_PLEN		0x28	/* size of floating-point reg block */
+
+/* offsets  into floating-point register block */
+
+#define I960_R_FP0		0x00	/* fp0; fp1 - fp3 follow in sequence */
+
+
+/* SPARC */
+
+#define SPARC_GREG_SIZE 	0x04	/* size of general-purpose reg */
+#define SPARC_GREG_PLEN 	0x98	/* size of general-purpose reg block */
+
+/* offsets into general-purpose register block */
+
+#define SPARC_R_G0		0x00	/* g0; g1 - g7 follow in sequence */
+#define SPARC_R_O0		0x20	/* o0; o1 - o7 follow in sequence */
+#define SPARC_R_L0		0x40	/* l0; l1 - l7 follow in sequence */
+#define SPARC_R_I0		0x60	/* i0; i1 - i7 follow in sequence */
+#define SPARC_R_Y		0x80	/* y */
+#define SPARC_R_PSR		0x84	/* psr */
+#define SPARC_R_WIM		0x88	/* wim */
+#define SPARC_R_TBR		0x8c	/* tbr */
+#define SPARC_R_PC		0x90	/* pc */
+#define SPARC_R_NPC		0x94	/* npc */
+
+#define SPARC_FPREG_SIZE 	0x04	/* size of floating-point reg */
+#define SPARC_FPREG_PLEN 	0x84	/* size of floating-point reg block */
+
+/* offsets into floating-point register block */
+
+#define SPARC_R_FP0		0x00	/* f0; f1 - f31 follow in sequence */
+#define SPARC_R_FSR		0x80	/* fsr */
+
+
+/* MIPS */
+
+#define MIPS_GREG_SIZE		0x04	/* size of general-purpose reg */
+#define MIPS_GREG_PLEN		0x90	/* size of general-purpose reg block */
+
+/* offsets into general-purpose register block */
+
+#define MIPS_R_GP0		0x00	/* gp0 (zero) */
+#define MIPS_R_AT		0x04	/* at */
+#define MIPS_R_V0		0x08	/* v0 */
+#define MIPS_R_V1		0x0c	/* v1 */
+#define MIPS_R_A0		0x10	/* a0 */
+#define MIPS_R_A1		0x14	/* a1 */
+#define MIPS_R_A2		0x18	/* a2 */
+#define MIPS_R_A3		0x1c	/* a3 */
+#define MIPS_R_T0		0x20	/* t0 */
+#define MIPS_R_T1		0x24	/* t1 */
+#define MIPS_R_T2		0x28	/* t2 */
+#define MIPS_R_T3		0x2c	/* t3 */
+#define MIPS_R_T4		0x30	/* t4 */
+#define MIPS_R_T5		0x34	/* t5 */
+#define MIPS_R_T6		0x38	/* t6 */
+#define MIPS_R_T7		0x3c	/* t7 */
+#define MIPS_R_S0		0x40	/* s0 */
+#define MIPS_R_S1		0x44	/* s1 */
+#define MIPS_R_S2		0x48	/* s2 */
+#define MIPS_R_S3		0x4c	/* s3 */
+#define MIPS_R_S4		0x50	/* s4 */
+#define MIPS_R_S5		0x54	/* s5 */
+#define MIPS_R_S6		0x58	/* s6 */
+#define MIPS_R_S7		0x5c	/* s7 */
+#define MIPS_R_T8		0x60	/* t8 */
+#define MIPS_R_T9		0x64	/* t9 */
+#define MIPS_R_K0		0x68	/* k0 */
+#define MIPS_R_K1		0x6c	/* k1 */
+#define MIPS_R_GP		0x70	/* gp */
+#define MIPS_R_SP		0x74	/* sp */
+#define MIPS_R_S8		0x78	/* s8 */
+#define MIPS_R_LO		0x80	/* lo */
+#define MIPS_R_HI		0x84	/* hi */
+#define MIPS_R_SR		0x88	/* sr */
+#define MIPS_R_PC		0x8c	/* pc */
+	
+#define MIPS_FPREG_SIZE		0x04	/* size of floating-point data reg */
+#define MIPS_FPREG_PLEN		0x84	/* size of floating-point reg block */
+
+/* offsets into floating-point register block */
+
+#define MIPS_R_FP0		0x00	/* f0; f1 - f31 follow in sequence */
+#define MIPS_R_FPCSR		0x80 	/* offset of fpcsr in reg block */
+
+
+/* General registers for the Am29k */
+
+#define AM29K_GREG_SIZE         0x04
+#define AM29K_GREG_PLEN         0x2d4
+
+#define AM29K_R_GR96            0x0
+#define AM29K_R_VAB             0x280
+#define AM29K_R_INTE            0x2bc
+#define AM29K_R_RSP             0x2c0
+
+/* Floating Point registers for the Am29k */
+
+#define AM29K_FPREG_SIZE        0x04
+#define AM29K_FPREG_PLEN        0x8
+
+#define AM29K_R_FPE             0x0
+#define AM29K_R_FPS             0x4
+
+#endif /* __INCregPacketh */
diff --git a/gdb/vx-share/vxTypes.h b/gdb/vx-share/vxTypes.h
new file mode 100644
index 0000000..c6b8419
--- /dev/null
+++ b/gdb/vx-share/vxTypes.h
@@ -0,0 +1,72 @@
+/* vxTypes.h - VxWorks type definition header */
+
+/*  Copyright 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01c,05oct90,shl  added copyright notice.
+                 made #endif ANSI style.
+01b,10aug90,dnw  added VOIDFUNCPTR
+01a,29may90,del  written.
+*/
+
+#ifndef INCvxTypesh
+#define INCvxTypesh
+
+/* The following stuff must NOT be included if this include file is used
+ * from assembly language.  Just #define ASMLANGUAGE before the include,
+ * to get rid of it.
+ */
+
+#ifndef ASMLANGUAGE
+
+/* vxWorks types */
+
+typedef	char		INT8;
+typedef	short		INT16;
+typedef	int		INT32;
+
+typedef	unsigned char	UINT8;
+typedef	unsigned short	UINT16;
+typedef	unsigned int	UINT32;
+
+typedef	unsigned char	UCHAR;
+typedef unsigned short	USHORT;
+typedef	unsigned int	UINT;
+typedef unsigned long	ULONG;
+
+typedef	int		BOOL;
+typedef	int		VOID;
+typedef	int		STATUS;	
+typedef int 		ARGINT;
+
+typedef int 		(*FUNCPTR) ();	    /* ptr to function returning int */
+typedef VOID 		(*VOIDFUNCPTR) ();  /* ptr to function returning VOID */
+
+
+/* historical definitions - now obsolete */
+
+typedef char		TINY;		/* obsolete */
+typedef char		TBOOL;		/* obsolete */
+typedef unsigned char	UTINY;		/* obsolete */
+
+
+/* architecture dependent typedefs */
+
+#ifdef	CPU_FAMILY
+
+#if	CPU_FAMILY==MC680X0
+typedef unsigned short INSTR;		/* word-aligned instructions */
+#endif	/* CPU_FAMILY==MC680X0 */
+
+#if	CPU_FAMILY==SPARC
+typedef unsigned long INSTR;		/* 32 bit word-aligned instructions */
+#endif	/* CPU_FAMILY==SPARC */
+
+#endif	
+
+#endif	/* ASMLANGUAGE */
+#endif	/* INCvxTypesh */
diff --git a/gdb/vx-share/vxWorks.h b/gdb/vx-share/vxWorks.h
new file mode 100644
index 0000000..1598837
--- /dev/null
+++ b/gdb/vx-share/vxWorks.h
@@ -0,0 +1,171 @@
+/* vxWorks.h - VxWorks standard definitions header */
+
+/*  Copyright 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01z,05oct90,shl  added copyright notice.
+                 made #endif ANSI style.
+01y,28sep90,del  added I960 defines.
+01x,29may90,del	 moved types to vxTypes.h
+01w,09apr90,jcf  added timeout definitions.
+01v,24jan90,gae  moved network configuration flags here from makefile's.
+01u,01sep88,mcl  definition of INSTR dependent on processor family; added SPARC.
+	   +gae  added MC680X0 and defined CPU_FAMILY.
+01t,08apr89,dnw  added ifdef to prevent inclusion of vxWorks.h more than once.
+01s,22jun88,dnw	 moved READ, WRITE, and UPDATE back here from ioLib.h.
+01r,22apr88,gae  oops! forgot some #endif's in 01q.
+01q,12apr88,gae  removed QUICK & WAIT; added STD_{IN,OUT,ERR}.
+		 fixed #define's of FALSE, TRUE, etc.
+		 moved READ, WRITE, and UPDATE to ioLib.h.
+01p,04dec87,dnw  added undefine of MC68000 to get around Green Hills bug that
+		   pre-defines MC68000.
+01o,12nov87,ecs  added type ULONG.
+01n,08feb86,dnw  added types INSTR, UINT, USHORT.
+01m,14oct85,rdc  added BUS types.
+01l,16jul85,jlf  added conditional for NULL and EOF.
+01k,24jun85,rdc  installed condtional compile so we can include in
+		 assembly language files.  See instructions below.
+		 Added System type macro and CPU type macro.
+01j,13jun85,dnw  cleaned-up, removed more obsolete stuff to wrs.h
+01i,11sep84,jlf  changed name from wrs.h to vxWorks.h.  removed GLOBAL.
+01h,03jun84,dnw  removed IGNORE declaration.
+01g,09apr84,jlf  added MEMBER_SIZE macro.
+01f,14dec83,dnw  added MSB, LSB macros
+01e,17nov83,jlf  added STATUS type, for routines which return a status.
+01d,13jul83,dnw  added NELEMENTS macro
+01c,14May83,dnw  added OFFSET macro
+01b,17Feb83,dnw  added stuff from Whitesmiths std.h
+01a,15Feb83,dnw  written
+*/
+
+#ifndef INCvxWorksh
+#define INCvxWorksh
+
+#if	!defined(EOF) || (EOF!=(-1))
+#define EOF		(-1)
+#endif	
+
+#if	!defined(FALSE) || (FALSE!=0)
+#define FALSE		0
+#endif	
+
+#if	!defined(TRUE) || (TRUE!=1)
+#define TRUE		1
+#endif	
+
+
+#define NONE		(-1)	/* for times when NULL won't do */
+#define EOS		'\0'	/* C string terminator */
+
+
+/* return status values */
+
+#define OK		0
+#define ERROR		(-1)
+
+/* timeout defines */
+
+#define NO_WAIT		0
+#define WAIT_FOREVER	(-1)
+
+/* low-level I/O input, output, error fd's */
+
+#define	STD_IN	0
+#define	STD_OUT	1
+#define	STD_ERR	2
+
+/* modes - must match O_RDONLY/O_WRONLY/O_RDWR in ioLib.h! */
+
+#define READ		0
+#define WRITE		1
+#define UPDATE		2
+
+/* SYSTEM types */
+
+#define V7		1	/* ATT version 7 */
+#define SYS_V		2	/* ATT System 5 */
+#define BSD_4_2		3	/* Berkeley BSD 4.2 */
+
+/* CPU types */
+
+/* The Green Hills compiler pre-defines "MC68000"!! */
+#ifdef MC68000
+#undef MC68000
+#endif	
+
+#define MC68000		1
+#define MC68010		2
+#define MC68020		3
+#define MC68030		4
+#define MC68040		5
+#define MC680X0		9
+
+#define SPARC		10
+
+#ifndef I960
+#define	I960		20
+#endif	
+
+#define	I960KB		21
+#define	I960CA		22
+
+#if	CPU==MC68000 || CPU==MC68010 || CPU==MC68020 || CPU==MC68030
+#define	CPU_FAMILY	MC680X0
+#endif	/* CPU==MC68000 || CPU==MC68010 || CPU==MC68020 || CPU==MC68030 */
+
+#if	CPU==SPARC
+#define	CPU_FAMILY	SPARC
+#endif	/* CPU==SPARC */
+
+#if 	CPU==I960KB
+#define	CPU_FAMILY	I960
+#endif	/* 	CPU==I960KB */
+
+#if 	CPU==I960CA
+#define	CPU_FAMILY	I960
+#endif	/* 	CPU==I960CA */
+
+/* BUS types */
+
+#define VME_BUS		1
+#define MULTI_BUS	2
+
+/* network configuration parameters */
+
+#define	INET		/* include internet protocols */
+#define	BSD	43	/* BSD 4.3 -like OS */
+#define	BSDDEBUG	/* turn on debug */
+#define	GATEWAY		/* tables to be initialized for gateway routing */
+
+/* common macros */
+
+#define MSB(x)	(((x) >> 8) & 0xff)	/* most signif byte of 2-byte integer */
+#define LSB(x)	((x) & 0xff)		/* least signif byte of 2-byte integer*/
+
+#define OFFSET(structure, member)	/* byte offset of member in structure*/\
+		((int) &(((structure *) 0) -> member))
+
+#define MEMBER_SIZE(structure, member)	/* size of a member of a structure */\
+		(sizeof (((structure *) 0) -> member))
+
+#define NELEMENTS(array)		/* number of elements in an array */ \
+		(sizeof (array) / sizeof ((array) [0]))
+
+#define FOREVER	for (;;)
+
+/* storage class specifier definitions */
+
+#define FAST	register
+#define IMPORT	extern
+#define LOCAL	static
+
+
+/* include typedefs - must come after CPU_FAMILY definitions above */
+
+#include "vxTypes.h"
+
+#endif	/* INCvxWorksh */
diff --git a/gdb/vx-share/wait.h b/gdb/vx-share/wait.h
new file mode 100644
index 0000000..cb8d1b5
--- /dev/null
+++ b/gdb/vx-share/wait.h
@@ -0,0 +1,46 @@
+/* wait.h - header file for remote wait call */
+
+/*  Copyright 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01a,05jun90,llk  borrowed.
+*/
+
+/* Define how to access the structure that the wait system call stores.
+   On many systems, there is a structure defined for this.
+   But on vanilla-ish USG systems there is not.  */
+
+#ifndef HAVE_WAIT_STRUCT
+#define WAITTYPE int
+#define WIFSTOPPED(w) (((w)&0377) == 0177)
+#define WIFSIGNALED(w) (((w)&0377) != 0177 && ((w)&~0377) == 0)
+#define WIFEXITED(w) (((w)&0377) == 0)
+#define WRETCODE(w) ((w) >> 8)
+#define WSTOPSIG(w) ((w) >> 8)
+#define WCOREDUMP(w) (((w)&0200) != 0)
+#define WTERMSIG(w) ((w) & 0177)
+#define WSETEXIT(w, status) ((w) = (status))
+#define WSETSTOP(w,sig)  ((w) = (0177 | ((sig) << 8)))
+#else
+#if FALSE
+#ifndef ORIG
+
+/* don't include sys/wait.h */
+
+#else ORIG
+#include <sys/wait.h>
+#endif ORIG
+#endif FALSE
+#define WAITTYPE union wait
+#define WRETCODE(w) (w).w_retcode
+#define WSTOPSIG(w) (w).w_stopsig
+#define WCOREDUMP(w) (w).w_coredump
+#define WTERMSIG(w) (w).w_termsig
+#define WSETEXIT(w, status) ((w).w_status = (status))
+#define WSETSTOP(w,sig)  \
+  ((w).w_stopsig = (sig), (w).w_coredump = 0, (w).w_termsig = 0177)
+#endif
diff --git a/gdb/vx-share/xdr_ld.c b/gdb/vx-share/xdr_ld.c
new file mode 100644
index 0000000..3678c35
--- /dev/null
+++ b/gdb/vx-share/xdr_ld.c
@@ -0,0 +1,84 @@
+/* xdr_ld.c  - xdr routines for remote dbx interface to VxWorks  */
+
+/*  Copyright 1984, 1985, 1986, 1987, 1988, 1989, 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01a,05jun90,llk  extracted from xdr_dbx.c.
+*/
+
+/*
+DESCRIPTION
+This module contains the eXternal Data Representation (XDR) routines
+for object files that are downloaded to VxWorks.  They are used by
+remote debuggers that use RPC (such as dbxWorks and vxGdb).
+*/
+
+#include "defs.h"
+#include "vxWorks.h"
+#include "rpc/rpc.h"
+#include "xdr_ld.h"
+
+/* forward declarations */
+
+bool_t xdr_String();   	/* xdr routine for argument list */
+
+
+/*******************************************************************************
+*
+* xdr_String - xdr routine for strings.
+* 
+* Used by xdr_arg_info to handle the actual argument
+* strings.  normally calls xdr_string - but does something 
+* reasonable encode of null pointer.
+*/
+
+bool_t xdr_String (xdrs, strp)
+    XDR	*xdrs;
+    char **strp;
+
+    {
+    if ((*strp == NULL) & (xdrs->x_op == XDR_ENCODE)) 
+	return(FALSE);
+    else 
+	return(xdr_string(xdrs, strp, MAXSTRLEN));
+    }
+/*******************************************************************************
+*
+* xdr_ldfile - xdr routine for a single element in the load table 
+*/
+
+bool_t xdr_ldfile (xdrs, objp)
+    XDR *xdrs;
+    ldfile *objp;
+
+    {
+    if (! xdr_String(xdrs, &objp->name)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->txt_addr)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->data_addr)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->bss_addr)) 
+	return(FALSE);
+
+    return(TRUE);
+    }
+/*******************************************************************************
+*
+* xdr_ldtabl -
+*
+* xdr routine for a list of files and load addresses loaded into VxWorks.
+*/
+
+bool_t xdr_ldtabl (xdrs,objp)
+    XDR *xdrs;
+    ldtabl *objp;
+
+    {
+    return (xdr_array (xdrs, (char **) &objp->tbl_ent, (UINT *) &objp->tbl_size, 
+	    MAXTBLSZ, sizeof(ldfile), xdr_ldfile));
+    }
diff --git a/gdb/vx-share/xdr_ld.h b/gdb/vx-share/xdr_ld.h
new file mode 100644
index 0000000..2899c0e
--- /dev/null
+++ b/gdb/vx-share/xdr_ld.h
@@ -0,0 +1,45 @@
+/* xdr_ld.h - xdr for additional dbxWorks structures */
+
+/*  Copyright 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01a,05jun90,llk  extracted from xdr_dbx.h.
+*/
+
+#ifndef INCxdrldh
+#define INCxdrldh
+
+#define MAXSTRLEN 256
+#define MAXTBLSZ 100
+
+/*
+ * structure used to pass back the information for a single file
+ * loaded in VxWorks
+ */
+struct ldfile {
+	char 	*name;
+	int 	txt_addr;
+	int 	data_addr;
+	int 	bss_addr;
+};
+typedef struct ldfile ldfile;
+
+/*
+ * structure used to return a list of all files loaded over to 
+ * VxWorks. (VX_STATE_INQ return)
+ */
+struct ldtabl {
+	u_int tbl_size;
+	ldfile *tbl_ent;
+};
+typedef struct ldtabl ldtabl;
+
+
+bool_t xdr_ldfile();
+bool_t xdr_ldtabl();
+
+#endif	INCxdrldh
diff --git a/gdb/vx-share/xdr_ptrace.c b/gdb/vx-share/xdr_ptrace.c
new file mode 100644
index 0000000..fff4324
--- /dev/null
+++ b/gdb/vx-share/xdr_ptrace.c
@@ -0,0 +1,118 @@
+/* xdr_ptrace.c  - xdr routines for remote ptrace calls */
+ 
+/*  Copyright 1984, 1985, 1986, 1987, 1988, 1989, 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01b,25may91,maf  now uses counted bytes struct to transfer registers.
+		 removed xdr_regs_ptr (), xdr_fp_status_ptr (), and
+		   xdr_fpa_regs_ptr ().
+01a,05jun90,llk  extracted from xdr_ptrace.h, version 01c.
+*/
+
+#include "defs.h"
+#include "vxWorks.h"
+#include <rpc/rpc.h>
+#include "xdr_ptrace.h"
+
+#define MAX_LEN 32000
+
+/********************************************************************
+*
+* xdr_c_bytes -
+*
+* xdr routine for counted bytes  
+*
+*/
+bool_t xdr_c_bytes(xdrs,objp)
+    XDR *xdrs;
+    C_bytes *objp;
+    {
+    return(xdr_bytes(xdrs, &objp->bytes, (u_int *) &objp->len, MAX_LEN));
+    } /* xdr_c_bytes */
+
+/********************************************************************
+*
+* xdr_c_bytes_ptr -
+*
+* xdr routine for counted bytes branch of ptrace_info
+*
+*/
+
+LOCAL bool_t xdr_c_bytes_ptr(xdrs,objp)
+    XDR *xdrs;
+    C_bytes **objp;
+    {
+    return(xdr_pointer(xdrs, (char **) objp, sizeof(C_bytes), xdr_c_bytes));
+    } /* xdr_c_bytes_ptr */
+
+/********************************************************************
+*
+* xdr_ptrace_info -
+*
+* xdr routine for discriminated union ptrace_info
+*
+*/
+
+bool_t xdr_ptrace_info(xdrs,objp)
+    XDR *xdrs;
+    Ptrace_info *objp;
+    {
+    static struct xdr_discrim choices[] = 
+	{
+	    { (int) DATA, xdr_c_bytes_ptr },
+	    { __dontcare__, NULL }
+	};
+
+    return(xdr_union(xdrs, (enum_t *) &objp->ttype, 
+	(char *) &objp->more_data, choices, xdr_void));
+    } /* xdr_ptrace_info */
+
+/********************************************************************
+*
+* xdr_rptrace - 
+*
+* xdr routine for remote ptrace data into server
+*
+*/
+
+bool_t xdr_rptrace(xdrs,objp)
+    XDR *xdrs;
+    Rptrace *objp;
+    {
+    if (! xdr_int(xdrs, &objp->pid)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->data)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->addr)) 
+	return(FALSE);
+    if (! xdr_ptrace_info(xdrs, &objp->info)) 
+	return(FALSE);
+
+    return(TRUE);
+    } /* xdr_rptrace */
+
+/********************************************************************
+*
+* xdr_ptrace_return - 
+*
+* xdr routine for remote ptrace data returned by server
+*
+*/
+
+bool_t xdr_ptrace_return(xdrs, objp)
+    XDR *xdrs;
+    Ptrace_return *objp;
+    {
+    if (! xdr_int(xdrs, &objp->status)) 
+	return(FALSE);
+    if (! xdr_int(xdrs, &objp->errno_num)) 
+	return(FALSE);
+    if (! xdr_ptrace_info(xdrs, &objp->info)) 
+	return(FALSE);
+
+    return(TRUE);
+    } /* xdr_ptrace_return */	
diff --git a/gdb/vx-share/xdr_ptrace.h b/gdb/vx-share/xdr_ptrace.h
new file mode 100644
index 0000000..9b4eb2b
--- /dev/null
+++ b/gdb/vx-share/xdr_ptrace.h
@@ -0,0 +1,72 @@
+/* xdr_ptrace.h - xdr header for remote ptrace structures */
+
+/*  Copyright 1992 Free Software Foundation, Inc.
+
+    This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01b,25may91,maf  now uses counted bytes struct to transfer registers;
+		   removed references to old xdr_regs functions.
+		 removed includes of "xdr_regs.h" and "reg.h".
+01a,05jun90,llk  extracted from xdr_ptrace.h.
+*/
+
+
+/*
+ *  Counted byte structure used by READ/WRITE TEXT/DATA
+ *  and GET/SET REGS/FPREGS
+ */
+struct c_bytes {
+	u_int	len;
+	caddr_t	bytes;
+};
+typedef struct c_bytes C_bytes;
+
+/*
+ * enum for discriminated union ptrace_info
+ */
+enum ptype {
+	NOINFO = 0,		/* no additional infomation	*/
+	DATA = 1		/* c_bytes */
+};
+typedef enum ptype ptype;
+
+/*
+ * discrimnated union for passing additional data to be 
+ * written to the debugged process.
+ */
+struct ptrace_info {
+	ptype	ttype;
+	caddr_t	more_data;	
+};
+typedef struct ptrace_info Ptrace_info;
+
+/*
+ * structure passed to server on all remote ptrace calls
+ */
+struct rptrace {
+	int 	pid;
+	int 	data;
+	int 	addr;	/* FIX! this really should be caddr_t or something */
+	Ptrace_info	info;
+};
+typedef struct rptrace Rptrace;
+
+/*
+ * structure returned by server on all remote ptrace calls
+ */
+/* This used to have a field called errno, but that fails on hosts which
+   define errno to be a macro, so it was changed to errno_num.  */
+struct ptrace_return {
+	int status;
+	int errno_num;
+	Ptrace_info	info;
+};
+typedef struct ptrace_return Ptrace_return;
+
+bool_t xdr_c_bytes();
+bool_t xdr_ptrace_info();
+bool_t xdr_rptrace();
+bool_t xdr_ptrace_return();
diff --git a/gdb/vx-share/xdr_rdb.c b/gdb/vx-share/xdr_rdb.c
new file mode 100644
index 0000000..0520f7f
--- /dev/null
+++ b/gdb/vx-share/xdr_rdb.c
@@ -0,0 +1,212 @@
+/* xdr_rdb.c  - xdr routines for Remote Debug interface to VxWorks  */
+
+/* Copyright 1992 Free Software Foundation, Inc.
+
+   This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01a,21mar90,llk  created using modification 01d of xdr_dbx.c.
+*/
+
+/*
+DESCRIPTION
+This module contains the eXternal Data Representation (XDR) routines
+for the RDB interface for VxWorks.
+*/
+
+#include "defs.h"
+#include "vxWorks.h"
+#include <rpc/rpc.h>
+#include "xdr_rdb.h"
+
+/* forward declarations */
+
+bool_t
+xdr_arg_type(xdrs, objp)
+        XDR *xdrs;
+        arg_type *objp;
+{
+        if (!xdr_enum(xdrs, (enum_t *)objp)) {
+                return (FALSE);
+        }
+        return (TRUE);
+}
+
+bool_t
+xdr_arg_value(xdrs, objp)
+        XDR *xdrs;
+        arg_value *objp;
+{
+        if (!xdr_arg_type(xdrs, &objp->type)) {
+                return (FALSE);
+        }
+        switch (objp->type) {
+        case T_BYTE:
+                if (!xdr_char(xdrs, &objp->arg_value_u.v_byte)) {
+                        return (FALSE);
+                }
+                break;
+        case T_WORD:
+                if (!xdr_short(xdrs, &objp->arg_value_u.v_word)) {
+                        return (FALSE);
+                }
+                break;
+        case T_INT:
+                if (!xdr_int(xdrs, &objp->arg_value_u.v_int)) {
+                        return (FALSE);
+                }
+                break;
+        case T_FLOAT:
+                if (!xdr_float(xdrs, &objp->arg_value_u.v_fp)) {
+                        return (FALSE);
+                }
+                break;
+        case T_DOUBLE:
+                if (!xdr_double(xdrs, &objp->arg_value_u.v_dp)) {
+                        return (FALSE);
+                }
+                break;
+        case T_UNKNOWN:
+                break;
+        }
+        return (TRUE);
+}
+
+bool_t
+xdr_func_call(xdrs, objp)
+        XDR *xdrs;
+        func_call *objp;
+{
+        if (!xdr_int(xdrs, &objp->func_addr)) {
+                return (FALSE);
+        }
+        if (!xdr_array(xdrs, (char **)&objp->args.args_val, (u_int *)&objp->args.args_len, MAX_FUNC_ARGS, sizeof(arg_value), xdr_arg_value)) {
+                return (FALSE);
+        }
+        return (TRUE);
+}
+
+bool_t
+xdr_arg_one(xdrs, objp)
+        XDR *xdrs;
+        arg_one *objp;
+{
+        if (!xdr_string(xdrs, objp, MAX_ARG_LEN)) {
+                return (FALSE);
+        }
+        return (TRUE);
+}
+
+
+
+
+bool_t
+xdr_arg_array(xdrs, objp)
+        XDR *xdrs;
+        arg_array *objp;
+{
+        if (!xdr_array(xdrs, (char **)&objp->arg_array_val, (u_int *)&objp->arg_array_len, MAX_ARG_CNT, sizeof(arg_one), xdr_arg_one)) {
+                return (FALSE);
+        }
+        return (TRUE);
+}
+
+/*********************************************************************
+*
+* xdr_EVENT_TYPE -
+*
+*/
+
+bool_t xdr_EVENT_TYPE(xdrs, objp)
+    XDR *xdrs;
+    EVENT_TYPE *objp;
+
+    {
+    if (!xdr_enum (xdrs, (enum_t *) objp))
+	return (FALSE);
+    return (TRUE);
+    }
+
+/*********************************************************************
+*
+* xdr_RDB_EVENT -
+*
+*/
+
+bool_t xdr_RDB_EVENT (xdrs, objp)
+    XDR *xdrs;
+    RDB_EVENT *objp;
+
+    {
+    if (!xdr_int (xdrs, &objp->status))
+	return (FALSE);
+    if (!xdr_int (xdrs, &objp->taskId))
+	return (FALSE);
+    if (!xdr_EVENT_TYPE (xdrs, &objp->eventType))
+	return (FALSE);
+    if (!xdr_int (xdrs, &objp->sigType))
+	return (FALSE);
+    return (TRUE);
+    }        
+
+/*********************************************************************
+*
+* xdr_TASK_START -
+*
+*/
+
+bool_t
+xdr_TASK_START (xdrs, objp)
+    XDR *xdrs;
+    TASK_START *objp;
+
+    {
+    if (!xdr_int (xdrs, &objp->status))
+	return (FALSE);
+    if (!xdr_int (xdrs, &objp->pid))
+	return (FALSE);
+    return (TRUE);
+    }
+
+
+/*********************************************************************
+*
+* xdr_SYMBOL_ADDR -
+*
+*/
+
+bool_t
+xdr_SYMBOL_ADDR (xdrs, objp)
+    XDR *xdrs;
+    SYMBOL_ADDR *objp;
+
+    {
+    if (!xdr_int (xdrs, &objp->status))
+	return (FALSE);
+    if (!xdr_u_int (xdrs, &objp->addr))
+	return (FALSE);
+    return (TRUE);
+    }
+
+/*********************************************************************
+*
+* xdr_SOURCE_STEP -
+*
+*/
+
+bool_t
+xdr_SOURCE_STEP (xdrs, objp)
+    XDR *xdrs;
+    SOURCE_STEP *objp;
+
+    {
+    if (!xdr_int (xdrs, &objp->taskId))
+	return (FALSE);
+    if (!xdr_u_int (xdrs, &objp->startAddr))
+	return (FALSE);
+    if (!xdr_u_int (xdrs, &objp->endAddr))
+	return (FALSE);
+    return (TRUE);
+    }
diff --git a/gdb/vx-share/xdr_rdb.h b/gdb/vx-share/xdr_rdb.h
new file mode 100644
index 0000000..0189453
--- /dev/null
+++ b/gdb/vx-share/xdr_rdb.h
@@ -0,0 +1,137 @@
+/* xdr_rdb.h - xdr for additional rdb structures */
+
+/* Copyright 1992 Free Software Foundation, Inc.
+
+   This code was donated by Wind River Systems, Inc. */
+
+/*
+modification history
+--------------------
+01c,25may91,maf  rolled RDBVERS for VxGDB 1.0 version.
+01b,12apr91,maf  rolled RDBVERS.
+01a,09jan91,maf  created using v1a of xdr_rdb.h for 4.0.2 VxWorks 68k.
+		 added struct SOURCE_STEP.
+*/
+
+#ifndef INCxdrrdbh
+#define INCxdrrdbh
+
+enum arg_type {
+        T_UNKNOWN = 0,
+        T_BYTE = 1,
+        T_WORD = 2,
+        T_INT = 3,
+        T_FLOAT = 4,
+        T_DOUBLE = 5
+};
+typedef enum arg_type arg_type;
+bool_t xdr_arg_type();
+
+
+struct arg_value {
+        arg_type type;
+        union {
+                char v_byte;
+                short v_word;
+                int v_int;
+                float v_fp;
+                double v_dp;
+        } arg_value_u;
+};
+typedef struct arg_value arg_value;
+bool_t xdr_arg_value();
+
+struct func_call {
+        int func_addr;
+        struct {
+                u_int args_len;
+                arg_value *args_val;
+        } args;
+};
+typedef struct func_call func_call;
+bool_t xdr_func_call();
+
+
+typedef char *arg_one;
+bool_t xdr_arg_one();
+
+
+typedef struct {
+        u_int arg_array_len;
+        arg_one *arg_array_val;
+} arg_array;
+bool_t xdr_arg_array();
+
+
+/*
+ * Structures used to pass structures required for
+ * process control but not part of the standard ptrace interface
+ */
+
+/*
+ * arg_info is used to pass arguments into process start
+ */
+struct arg_info {
+	int rargc;
+	char **rargv;
+};
+typedef struct arg_info Arg_info;
+
+
+enum EVENT_TYPE {
+        EVENT_BREAK = 0,
+        EVENT_STOP = 1,
+        EVENT_EXIT = 2,
+        EVENT_BUS_ERR = 3,
+        EVENT_SUSPEND = 4,
+        EVENT_ZERO_DIV = 5,
+        EVENT_SIGNAL = 6,
+        EVENT_START = 7
+};
+typedef enum EVENT_TYPE EVENT_TYPE;
+
+
+struct RDB_EVENT {
+	int status;
+	int taskId;
+        EVENT_TYPE eventType;
+        int sigType;
+};
+typedef struct RDB_EVENT RDB_EVENT;
+
+
+struct TASK_START {
+        int status;
+        int pid;
+};
+typedef struct TASK_START TASK_START;
+
+
+struct SYMBOL_ADDR {
+        int status;
+        u_int addr;
+};
+typedef struct SYMBOL_ADDR SYMBOL_ADDR;
+
+struct SOURCE_STEP {
+	int taskId;
+	u_int startAddr;
+	u_int endAddr;
+};
+typedef struct SOURCE_STEP SOURCE_STEP;
+
+#define MAX_ARG_CNT 10
+#define MAX_FUNC_ARGS 100
+#define MAX_ARG_LEN   100
+
+
+bool_t xdr_arg_info();
+bool_t xdr_EVENT_TYPE();
+bool_t xdr_RDB_EVENT();
+bool_t xdr_TASK_START();
+bool_t xdr_SYMBOL_ADDR();
+bool_t xdr_SOURCE_STEP();
+
+#define RDBPROG (u_long) 0x44444444
+#define RDBVERS (u_long) 3
+#endif	INCxdrrdbh
diff --git a/gdb/w65-tdep.c b/gdb/w65-tdep.c
new file mode 100644
index 0000000..9546616
--- /dev/null
+++ b/gdb/w65-tdep.c
@@ -0,0 +1,295 @@
+/* Target-machine dependent code for WDC-65816, for GDB.
+   Copyright (C) 1995 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+   Contributed by Steve Chamberlain
+   sac@cygnus.com
+ */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbcmd.h"
+#include "gdbtypes.h"
+#include "dis-asm.h"
+#include "gdbcore.h"
+
+/* Return the saved PC from this frame. */
+
+
+CORE_ADDR
+w65_frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  return (read_memory_integer (frame->frame + 2, 4) & 0xffffff);
+}
+
+CORE_ADDR
+w65_addr_bits_remove (addr)
+     CORE_ADDR addr;
+{
+  return ((addr) & 0xffffff);
+}
+
+read_memory_pointer (x)
+     CORE_ADDR x;
+{
+  return read_memory_integer (ADDR_BITS_REMOVE (x), 4);
+}
+
+init_frame_pc ()
+{
+  abort ();
+}
+
+void
+w65_push_dummy_frame ()
+{
+  abort ();
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   We cache the result of doing this in the frame_cache_obstack, since
+   it is fairly expensive.  */
+
+void
+frame_find_saved_regs (fip, fsrp)
+     struct frame_info *fip;
+     struct frame_saved_regs *fsrp;
+{
+  int locals;
+  CORE_ADDR pc;
+  CORE_ADDR adr;
+  int i;
+
+  memset (fsrp, 0, sizeof *fsrp);
+}
+
+int
+saved_pc_after_call ()
+{
+  int sp = read_register (SP_REGNUM);
+  int val = read_memory_integer (sp + 1, 4);
+  return ADDR_BITS_REMOVE (val);
+}
+
+
+extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+{
+  int b;
+  int len = TYPE_LENGTH (type);
+
+  for (b = 0; b < len; b += 2)
+    {
+      int todo = len - b;
+      if (todo > 2)
+	todo = 2;
+      memcpy (valbuf + b, regbuf + b, todo);
+    }
+}
+
+void
+write_return_value (type, valbuf)
+     struct type *type;
+     char *valbuf;
+{
+  int reg;
+  int len;
+  for (len = 0; len < TYPE_LENGTH (type); len += 2)
+    {
+      write_register_bytes (REGISTER_BYTE (len / 2 + 2), valbuf + len, 2);
+    }
+}
+
+void
+store_struct_return (addr, sp)
+     CORE_ADDR addr;
+     CORE_ADDR sp;
+{
+  write_register (2, addr);
+}
+
+void
+w65_pop_frame ()
+{
+}
+
+init_extra_frame_info ()
+{
+}
+
+pop_frame ()
+{
+}
+
+w65_frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+  return 0xffff & read_memory_integer ((thisframe)->frame, 2);
+}
+
+static int
+gb (x)
+{
+  return read_memory_integer (x, 1) & 0xff;
+}
+
+extern CORE_ADDR 
+w65_skip_prologue (pc)
+     CORE_ADDR pc;
+{
+  CORE_ADDR too_far = pc + 20;
+
+  /* looking for bits of the prologue, we can expect to
+     see this in a frameful function:
+
+     stack adjust:
+
+     3B                 tsc
+     1A                 inc a
+     18                 clc
+     69E2FF             adc     #0xffe2
+     3A                 dec a
+     1B                 tcs
+     1A                 inc a
+
+     link:
+
+     A500               lda     <r15
+     48                 pha
+     3B                 tsc
+     1a                 inc     a
+     8500               sta     <r15
+
+   */
+
+#define TSC  0x3b
+#define TCS  0x1b
+#define INCA 0x1a
+#define PHA  0x48
+#define LDADIR 0xa5
+#define STADIR 0x85
+
+  /* Skip a stack adjust - any area between a tsc and tcs */
+  if (gb (pc) == TSC)
+    {
+      while (pc < too_far && gb (pc) != TCS)
+	{
+	  pc++;
+	}
+      pc++;
+      /* Skip a stupid inc a */
+      if (gb (pc) == INCA)
+	pc++;
+
+    }
+  /* Stack adjust can also be done with n pha's */
+  while (gb (pc) == PHA)
+    pc++;
+
+  /* Skip a link - that's a ld/ph/tsc/inc/sta */
+
+  if (gb (pc) == LDADIR
+      && gb (pc + 5) == STADIR
+      && gb (pc + 1) == gb (pc + 6)
+      && gb (pc + 2) == PHA
+      && gb (pc + 3) == TSC
+      && gb (pc + 4) == INCA)
+    {
+      pc += 7;
+    }
+
+  return pc;
+}
+
+
+register_raw_size (n)
+{
+  return sim_reg_size (n);
+}
+
+
+void
+print_register_hook (regno)
+{
+  if (regno == P_REGNUM)
+    {
+      /* CCR register */
+
+      int C, Z, N, V, I, D, X, M;
+      unsigned char b[1];
+      unsigned char l;
+
+      read_relative_register_raw_bytes (regno, b);
+      l = b[0];
+      printf_unfiltered ("\t");
+      C = (l & 0x1) != 0;
+      Z = (l & 0x2) != 0;
+      I = (l & 0x4) != 0;
+      D = (l & 0x8) != 0;
+      X = (l & 0x10) != 0;
+      M = (l & 0x20) != 0;
+      V = (l & 0x40) != 0;
+      N = (l & 0x80) != 0;
+
+      printf_unfiltered ("N-%d ", N);
+      printf_unfiltered ("V-%d ", V);
+      printf_unfiltered ("M-%d ", M);
+      printf_unfiltered ("X-%d ", X);
+      printf_unfiltered ("D-%d ", D);
+      printf_unfiltered ("I-%d ", I);
+      printf_unfiltered ("Z-%d ", Z);
+      printf_unfiltered ("C-%d ", C);
+      if ((C | Z) == 0)
+	printf_unfiltered ("u> ");
+      if ((C | Z) == 1)
+	printf_unfiltered ("u<= ");
+      if ((C == 0))
+	printf_unfiltered ("u>= ");
+      if (C == 1)
+	printf_unfiltered ("u< ");
+      if (Z == 0)
+	printf_unfiltered ("!= ");
+      if (Z == 1)
+	printf_unfiltered ("== ");
+      if ((N ^ V) == 0)
+	printf_unfiltered (">= ");
+      if ((N ^ V) == 1)
+	printf_unfiltered ("< ");
+      if ((Z | (N ^ V)) == 0)
+	printf_unfiltered ("> ");
+      if ((Z | (N ^ V)) == 1)
+	printf_unfiltered ("<= ");
+    }
+}
+
+void
+_initialize_w65_tdep ()
+{
+  tm_print_insn = print_insn_w65;
+}
diff --git a/gdb/w89k-rom.c b/gdb/w89k-rom.c
new file mode 100644
index 0000000..d01a265
--- /dev/null
+++ b/gdb/w89k-rom.c
@@ -0,0 +1,317 @@
+/* Remote target glue for the WinBond ROM monitor running on the "Cougar"
+   W89k eval board.
+
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+#include "xmodem.h"
+
+
+static void w89k_open PARAMS ((char *args, int from_tty));
+
+/*
+ * this array of registers need to match the indexes used by GDB. The
+ * whole reason this exists is cause the various ROM monitors use
+ * different strings than GDB does, and doesn't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+
+static char *w89k_regnames[NUM_REGS] =
+{
+  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+  "SAR", "PC", NULL, NULL, NULL, "EIEM", "IIR", "IVA",
+  "IOR", "IPSW", NULL, NULL, NULL, NULL, NULL,
+  NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+  "CCR", NULL, NULL, "TR0", "TR1",
+};
+
+static void
+w89k_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int numregs;
+  int regno;
+
+  numregs = 1;
+  regno = -1;
+
+  if (regnamelen == 2)
+    switch (regname[0])
+      {
+      case 'r':
+	numregs = 4;
+	switch (regname[1])
+	  {
+	  case '0':
+	    regno = R0_REGNUM;
+	    break;
+	  case '4':
+	    regno = R0_REGNUM + 4;
+	    break;
+	  case '8':
+	    regno = R0_REGNUM + 8;
+	    break;
+	  }
+	break;
+      case 'P':
+	if (regname[1] == 'C')
+	  regno = PC_REGNUM;
+	break;
+      }
+  else if (regnamelen == 3)
+    switch (regname[0])
+      {
+      case 'r':
+	numregs = 4;
+	if (regname[1] == '1' && regname[2] == '2')
+	  regno = R0_REGNUM + 12;
+	else if (regname[1] == '1' && regname[2] == '6')
+	  regno = R0_REGNUM + 16;
+	else if (regname[1] == '2' && regname[2] == '0')
+	  regno = R0_REGNUM + 20;
+	else if (regname[1] == '2' && regname[2] == '4')
+	  regno = R0_REGNUM + 24;
+	else if (regname[1] == '2' && regname[2] == '8')
+	  regno = R0_REGNUM + 28;
+	break;
+      case 'R':
+	if (regname[1] == 'C' && regname[2] == 'R')
+	  regno = RCR_REGNUM;
+	break;
+      case 'C':
+	if (regname[1] == 'C' && regname[2] == 'R')
+	  regno = CCR_REGNUM;
+	break;
+      case 'S':
+	if (regname[1] == 'A' && regname[2] == 'R')
+	  regno = SAR_REGNUM;
+	break;
+      case 'I':
+	if (regname[1] == 'I' && regname[2] == 'R')
+	  regno = IIR_REGNUM;
+	else if (regname[1] == 'O' && regname[2] == 'R')
+	  regno = IOR_REGNUM;
+	break;
+      case 'T':
+	numregs = 4;
+	if (regname[1] == 'R')
+	  if (regname[2] == '0')
+	    regno = TR0_REGNUM;
+	  else if (regname[2] == '4')
+	    regno = TR0_REGNUM + 4;
+	break;
+      }
+  else if (regnamelen == 4)
+    switch (regname[0])
+      {
+      case 'E':
+	if (regname[1] == 'I')
+	  if (regname[2] == 'E' && regname[3] == 'M')
+	    regno = EIEM_REGNUM;
+	break;
+      case 'I':
+	if (regname[1] == 'P' && regname[2] == 'S' && regname[3] == 'W')
+	  regno = IPSW_REGNUM;
+	break;
+      }
+  else if (regnamelen == 5)
+    switch (regname[0])
+      {
+      case 'I':
+	if (regname[1] == 'A'
+	    && regname[2] == 'O'
+	    && regname[3] == 'Q'
+	    && regname[4] == 'B')
+	  regno = PCOQ_TAIL_REGNUM;
+	break;
+      }
+
+  if (regno >= 0)
+    while (numregs-- > 0)
+      val = monitor_supply_register (regno++, val);
+}
+
+static int hashmark = 1;	/* flag set by "set hash" */
+
+extern struct monitor_ops w89k_cmds; /* fwd decl */
+
+static void
+w89k_load (desc, file, hashmark)
+     serial_t desc;
+     char *file;
+     int hashmark;
+{
+  bfd *abfd;
+  asection *s;
+  char *buffer;
+  int i;
+
+  buffer = alloca (XMODEM_PACKETSIZE);
+
+  abfd = bfd_openr (file, 0);
+  if (!abfd)
+    {
+      printf_filtered ("Unable to open file %s\n", file);
+      return;
+    }
+
+  if (bfd_check_format (abfd, bfd_object) == 0)
+    {
+      printf_filtered ("File is not an object file\n");
+      return;
+    }
+  
+  for (s = abfd->sections; s; s = s->next)
+    if (s->flags & SEC_LOAD)
+      {
+	bfd_size_type section_size;
+
+	printf_filtered ("%s\t: 0x%4x .. 0x%4x  ", s->name, s->vma,
+			 s->vma + s->_raw_size);
+	gdb_flush (gdb_stdout);
+
+	monitor_printf (w89k_cmds.load, s->vma);
+	if (w89k_cmds.loadresp)
+	  monitor_expect (w89k_cmds.loadresp, NULL, 0);
+
+	xmodem_init_xfer (desc);
+
+	section_size = bfd_section_size (abfd, s);
+
+	for (i = 0; i < section_size; i += XMODEM_DATASIZE)
+	  {
+	    int numbytes;
+
+	    numbytes = min (XMODEM_DATASIZE, section_size - i);
+
+	    bfd_get_section_contents (abfd, s, buffer + XMODEM_DATAOFFSET, i,
+				      numbytes);
+
+	    xmodem_send_packet (desc, buffer, numbytes, hashmark);
+
+	    if (hashmark)
+	      {
+		putchar_unfiltered ('#');
+		gdb_flush (gdb_stdout);
+	      }
+	  }			/* Per-packet (or S-record) loop */
+
+	xmodem_finish_xfer (desc);
+
+	monitor_expect_prompt (NULL, 0);
+
+	putchar_unfiltered ('\n');
+      }				/* Loadable sections */
+  
+  if (hashmark) 
+    putchar_unfiltered ('\n');
+}
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops w89k_ops;
+
+static char *w89k_inits[] = {"\n", NULL};
+
+static struct monitor_ops w89k_cmds ;
+static void
+init_w89k_cmds(void)
+{
+  w89k_cmds.flags =   MO_GETMEM_NEEDS_RANGE|MO_FILL_USES_ADDR; /* flags */
+  w89k_cmds.init =   w89k_inits;		/* Init strings */
+  w89k_cmds.cont =   "g\n";			/* continue command */
+  w89k_cmds.step =   "t\n";			/* single step */
+  w89k_cmds.stop =   "\003";			/* Interrupt char (^C) */
+  w89k_cmds.set_break =   "bp %x\n";		/* set a breakpoint */
+  w89k_cmds.clr_break =   "bc %x\n";		/* clear a breakpoint */
+  w89k_cmds.clr_all_break =   "bc *\n";		/* clear all breakpoints */
+  w89k_cmds.fill =   "f %x %x %x\n";		/* memory fill cmd */
+  w89k_cmds.setmem.cmdb =     "eb %x %x\n";	/* setmem.cmdb (addr, value) */
+  w89k_cmds.setmem.cmdw =     "eh %x %x\n";	/* setmem.cmdw (addr, value) */
+  w89k_cmds.setmem.cmdl =     "ew %x %x\n";	/* setmem.cmdl (addr, value) */
+  w89k_cmds.setmem.cmdll =     NULL;		/* setmem.cmdll (addr, value) */
+  w89k_cmds.setmem.resp_delim =     NULL;	/* setreg.resp_delim */
+  w89k_cmds.setmem.term =     NULL;		/* setreg.term */
+  w89k_cmds.setmem.term_cmd =     NULL;		/* setreg.term_cmd */
+  w89k_cmds.getmem.cmdb =     "db %x %x\n";/* getmem.cmdb (startaddr, endaddr) */
+  w89k_cmds.getmem.cmdw =     "dh %x %x\n";/* getmem.cmdw (startaddr, endaddr) */
+  w89k_cmds.getmem.cmdl =     "dw %x %x\n";/* getmem.cmdl (startaddr, endaddr) */
+  w89k_cmds.getmem.cmdll =     NULL;	  /* getmem.cmdll (startaddr, endaddr) */
+  w89k_cmds.getmem.resp_delim =     "  ";	/* getmem.resp_delim */
+  w89k_cmds.getmem.term =     NULL;		/* getmem.term */
+  w89k_cmds.getmem.term_cmd =     NULL;		/* getmem.term_cmd */
+  w89k_cmds.setreg.cmd =     "r %s %x\n";	/* setreg.cmd (name, value) */
+  w89k_cmds.setreg.resp_delim =     NULL;	/* setreg.resp_delim */
+  w89k_cmds.setreg.term =     NULL;		/* setreg.term */
+  w89k_cmds.setreg.term_cmd =     NULL;		/* setreg.term_cmd */
+  w89k_cmds.getreg.cmd =     "r %s\n";		/* getreg.cmd (name) */
+  w89k_cmds.getreg.resp_delim =     "\r";	/* getreg.resp_delim */
+  w89k_cmds.getreg.term =     NULL;		/* getreg.term */
+  w89k_cmds.getreg.term_cmd =     NULL;		/* getreg.term_cmd */
+  w89k_cmds.dump_registers =   "r\n";		/* dump_registers */
+  w89k_cmds.register_pattern =   "\\(\\w+\\)\\( +[0-9a-fA-F]+\\b\\)+";
+  w89k_cmds.supply_register =   w89k_supply_register;		/* supply_register */
+  w89k_cmds.load_routine =   w89k_load;		/* load routine */
+  w89k_cmds.load =   "u %x\n";			/* download command */
+  w89k_cmds.loadresp =   "\021";		/* load response (^Q) */
+  w89k_cmds.prompt =   "ROM>";			/* monitor command prompt */
+  w89k_cmds.line_term =   "\n";			/* end-of-line terminator */
+  w89k_cmds.cmd_end =   NULL;			/* optional command terminator */
+  w89k_cmds.target =   &w89k_ops;		/* target operations */
+  w89k_cmds.stopbits =   SERIAL_1_STOPBITS;	/* number of stop bits */
+  w89k_cmds.regnames =   w89k_regnames;		/* register names */
+  w89k_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_w89k_cmds */
+    
+static void
+w89k_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &w89k_cmds, from_tty);
+}
+
+void
+_initialize_w89k ()
+{
+  init_w89k_cmds() ;
+  init_monitor_ops (&w89k_ops);
+
+  w89k_ops.to_shortname = "w89k";
+  w89k_ops.to_longname = "WinBond's debug monitor for the W89k Eval board";
+  w89k_ops.to_doc = "Debug on a WinBond W89K eval board.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  w89k_ops.to_open = w89k_open;
+
+  add_target (&w89k_ops);
+}
diff --git a/gdb/win32-nat.c b/gdb/win32-nat.c
new file mode 100644
index 0000000..87e96bd
--- /dev/null
+++ b/gdb/win32-nat.c
@@ -0,0 +1,1122 @@
+/* Target-vector operations for controlling win32 child processes, for GDB.
+   Copyright 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without eve nthe implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
+
+/* by Steve Chamberlain, sac@cygnus.com */
+
+/* We assume we're being built with and will be used for cygwin.  */
+
+#include "defs.h"
+#include "frame.h"		/* required by inferior.h */
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "gdbcore.h"
+#include "command.h"
+#include <signal.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <stdlib.h>
+
+#ifdef _MSC_VER
+#include "windefs.h"
+#else /* other WIN32 compiler */
+#include <windows.h>
+#endif
+
+#include "buildsym.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "gdb_string.h"
+#include "gdbthread.h"
+#include "gdbcmd.h"
+#include <sys/param.h>
+#include <unistd.h>
+
+/* The string sent by cygwin when it processes a signal.
+   FIXME: This should be in a cygwin include file. */
+#define CYGWIN_SIGNAL_STRING "cygwin: signal"
+
+#define CHECK(x) 	check (x, __FILE__,__LINE__)
+#define DEBUG_EXEC(x)	if (debug_exec)		printf x
+#define DEBUG_EVENTS(x)	if (debug_events)	printf x
+#define DEBUG_MEM(x)	if (debug_memory)	printf x
+#define DEBUG_EXCEPT(x)	if (debug_exceptions)	printf x
+
+/* Forward declaration */
+extern struct target_ops child_ops;
+
+static void child_stop PARAMS ((void));
+static int win32_child_thread_alive PARAMS ((int));
+
+static int last_sig = 0;	/* Set if a signal was received from the
+				   debugged process */
+
+/* Thread information structure used to track information that is
+   not available in gdb's thread structure. */
+typedef struct thread_info_struct
+{
+  struct thread_info_struct *next;
+  DWORD id;
+  HANDLE h;
+  char *name;
+  int suspend_count;
+  CONTEXT context;
+} thread_info;
+
+static thread_info thread_head = {NULL};
+
+/* The process and thread handles for the above context. */
+
+static DEBUG_EVENT current_event;	/* The current debug event from
+					   WaitForDebugEvent */
+static HANDLE current_process_handle;	/* Currently executing process */
+static thread_info *current_thread;	/* Info on currently selected thread */
+static DWORD main_thread_id;		/* Thread ID of the main thread */
+
+/* Counts of things. */
+static int exception_count = 0;
+static int event_count = 0;
+
+/* User options. */
+static int new_console = 0;
+static int new_group = 0;
+static int debug_exec = 0;		/* show execution */
+static int debug_events = 0;		/* show events from kernel */
+static int debug_memory = 0;		/* show target memory accesses */
+static int debug_exceptions = 0;	/* show target exceptions */
+
+/* This vector maps GDB's idea of a register's number into an address
+   in the win32 exception context vector.
+
+   It also contains the bit mask needed to load the register in question.
+
+   One day we could read a reg, we could inspect the context we
+   already have loaded, if it doesn't have the bit set that we need,
+   we read that set of registers in using GetThreadContext.  If the
+   context already contains what we need, we just unpack it. Then to
+   write a register, first we have to ensure that the context contains
+   the other regs of the group, and then we copy the info in and set
+   out bit. */
+
+#define context_offset(x) ((int)&(((CONTEXT *)NULL)->x))
+static const int mappings[] =
+{
+  context_offset(Eax),
+  context_offset(Ecx),
+  context_offset(Edx),
+  context_offset(Ebx),
+  context_offset(Esp),
+  context_offset(Ebp),
+  context_offset(Esi),
+  context_offset(Edi),
+  context_offset(Eip),
+  context_offset(EFlags),
+  context_offset(SegCs),
+  context_offset(SegSs),
+  context_offset(SegDs),
+  context_offset(SegEs),
+  context_offset(SegFs),
+  context_offset(SegGs),
+  context_offset(FloatSave.RegisterArea[0 * 10]),
+  context_offset(FloatSave.RegisterArea[1 * 10]),
+  context_offset(FloatSave.RegisterArea[2 * 10]),
+  context_offset(FloatSave.RegisterArea[3 * 10]),
+  context_offset(FloatSave.RegisterArea[4 * 10]),
+  context_offset(FloatSave.RegisterArea[5 * 10]),
+  context_offset(FloatSave.RegisterArea[6 * 10]),
+  context_offset(FloatSave.RegisterArea[7 * 10]),
+};
+
+/* This vector maps the target's idea of an exception (extracted
+   from the DEBUG_EVENT structure) to GDB's idea. */
+
+struct xlate_exception
+  {
+    int them;
+    enum target_signal us;
+  };
+
+static const struct xlate_exception
+  xlate[] =
+{
+  {EXCEPTION_ACCESS_VIOLATION, TARGET_SIGNAL_SEGV},
+  {STATUS_STACK_OVERFLOW, TARGET_SIGNAL_SEGV},
+  {EXCEPTION_BREAKPOINT, TARGET_SIGNAL_TRAP},
+  {DBG_CONTROL_C, TARGET_SIGNAL_INT},
+  {EXCEPTION_SINGLE_STEP, TARGET_SIGNAL_TRAP},
+  {-1, -1}};
+
+/* Find a thread record given a thread id.
+   If get_context then also retrieve the context for this
+   thread. */
+static thread_info *
+thread_rec (DWORD id, int get_context)
+{
+  thread_info *th;
+
+  for (th = &thread_head; (th = th->next) != NULL; )
+    if (th->id == id)
+      {
+	if (!th->suspend_count && get_context)
+	  {
+	    if (get_context > 0)
+	      th->suspend_count = SuspendThread (th->h) + 1;
+	    else if (get_context < 0)
+	      th->suspend_count = -1;
+
+	    th->context.ContextFlags = CONTEXT_DEBUGGER;
+	    GetThreadContext (th->h, &th->context);
+	  }
+	return th;
+      }
+
+  return NULL;
+}
+
+/* Add a thread to the thread list */
+static thread_info *
+child_add_thread(DWORD id, HANDLE h)
+{
+  thread_info *th;
+
+  if ((th = thread_rec (id, FALSE)))
+    return th;
+
+  th = (thread_info *) xmalloc (sizeof (*th));
+  memset(th, 0, sizeof (*th));
+  th->id = id;
+  th->h = h;
+  th->next = thread_head.next;
+  thread_head.next = th;
+  add_thread (id);
+  return th;
+}
+
+/* Clear out any old thread list and reintialize it to a
+   pristine state. */
+static void
+child_init_thread_list ()
+{
+  thread_info *th = &thread_head;
+
+  DEBUG_EVENTS (("gdb: child_init_thread_list\n"));
+  init_thread_list ();
+  while (th->next != NULL)
+    {
+      thread_info *here = th->next;
+      th->next = here->next;
+      (void) CloseHandle (here->h);
+      free (here);
+    }
+}
+
+/* Delete a thread from the list of threads */
+static void
+child_delete_thread (DWORD id)
+{
+  thread_info *th;
+
+  if (info_verbose)
+    printf_unfiltered ("[Deleting %s]\n", target_pid_to_str (id));
+  delete_thread (id);
+
+  for (th = &thread_head;
+       th->next != NULL && th->next->id != id;
+       th = th->next)
+    continue;
+
+  if (th->next != NULL)
+    {
+      thread_info *here = th->next;
+      th->next = here->next;
+      CloseHandle (here->h);
+      free (here);
+    }
+}
+
+static void
+check (BOOL ok, const char *file, int line)
+{
+  if (!ok)
+    printf_filtered ("error return %s:%d was %d\n", file, line, GetLastError ());
+}
+
+static void
+do_child_fetch_inferior_registers (int r)
+{
+  if (r >= 0)
+    supply_register (r, ((char *) &current_thread->context) + mappings[r]);
+  else
+    {
+      for (r = 0; r < NUM_REGS; r++)
+	do_child_fetch_inferior_registers (r);
+    }
+}
+
+static void
+child_fetch_inferior_registers (int r)
+{
+  current_thread = thread_rec (inferior_pid, TRUE);
+  do_child_fetch_inferior_registers (r);
+}
+
+static void
+do_child_store_inferior_registers (int r)
+{
+  if (r >= 0)
+    read_register_gen (r, ((char *) &current_thread->context) + mappings[r]);
+  else
+    {
+      for (r = 0; r < NUM_REGS; r++)
+	do_child_store_inferior_registers (r);
+    }
+}
+
+/* Store a new register value into the current thread context */
+static void
+child_store_inferior_registers (int r)
+{
+  current_thread = thread_rec (inferior_pid, TRUE);
+  do_child_store_inferior_registers (r);
+}
+
+/* Wait for child to do something.  Return pid of child, or -1 in case
+   of error; store status through argument pointer OURSTATUS.  */
+
+static int
+handle_load_dll (PTR dummy)
+{
+  LOAD_DLL_DEBUG_INFO * event = &current_event.u.LoadDll;
+  DWORD dll_name_ptr;
+  DWORD done;
+  char dll_buf[MAX_PATH + 1];
+  char *p, *dll_name = NULL, *dll_basename;
+  struct objfile *objfile;
+  MEMORY_BASIC_INFORMATION minfo;
+
+  dll_buf[0] = dll_buf[sizeof(dll_buf) - 1] = '\0';
+
+  /* The following code attempts to find the name of the dll by reading the
+     name from the processes memory.  Unfortunately it doesn't work right.
+     Doing this the "right way" for Windows is very difficult.  FIXME */
+#ifdef DOESNT_WORK
+  memset (&minfo, 0, sizeof minfo);
+  if (VirtualQueryEx (current_process_handle, (LPCVOID) event->lpBaseOfDll,
+		      &minfo, sizeof(minfo)) && minfo.BaseAddress) {
+      DWORD len;
+      IMAGE_DOS_HEADER *hmm0 = (IMAGE_DOS_HEADER *) minfo.BaseAddress;
+      HMODULE hmm = (HMODULE) (((DWORD) hmm0) + hmm0->e_lfanew);
+
+      if ((len = GetModuleFileName (hmm, dll_buf, MAX_PATH)))
+	{
+	  dll_name = dll_buf;
+	  dll_name[len] = '\0';
+	}
+  }
+#endif
+
+  /* Attempt to read the name of the dll that was detected.
+     This is documented to work only when actively debugging
+     a program.  It will not work for attached processes. */
+  if (dll_name == NULL || *dll_name == '\0')
+    {
+      int size = event->fUnicode ? sizeof (WCHAR) : sizeof (char);
+      int len = 0;
+      char b[2];
+
+      ReadProcessMemory (current_process_handle,
+			 (LPCVOID) event->lpImageName,
+			 (char *) &dll_name_ptr,
+			 sizeof (dll_name_ptr), &done);
+
+      /* See if we could read the address of a string, and that the
+	 address isn't null. */
+
+      if (done != sizeof (dll_name_ptr) || !dll_name_ptr)
+	return 1;
+
+      do
+	{
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) (dll_name_ptr + len * size),
+			     &b,
+			     size,
+			     &done);
+	  len++;
+	}
+      while ((b[0] != 0 || b[size - 1] != 0) && done == size);
+
+      dll_name = alloca (len);
+
+      if (event->fUnicode)
+	{
+	  WCHAR *unicode_dll_name = (WCHAR *) alloca (len * sizeof (WCHAR));
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) dll_name_ptr,
+			     unicode_dll_name,
+			     len * sizeof (WCHAR),
+			     &done);
+
+	  WideCharToMultiByte (CP_ACP, 0,
+			       unicode_dll_name, len,
+			       dll_name, len, 0, 0);
+	}
+      else
+	{
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) dll_name_ptr,
+			     dll_name,
+			     len,
+			     &done);
+	}
+    }
+
+  if (!dll_name)
+    return 1;
+
+  while ((p = strchr (dll_name, '\\')))
+    *p = '/';
+
+  /* FIXME!! It would be nice to define one symbol which pointed to the
+     front of the dll if we can't find any symbols. */
+
+  if (!(dll_basename = strrchr(dll_name, '/')))
+    dll_basename = dll_name;
+  else
+    dll_basename++;
+
+  ALL_OBJFILES(objfile)
+    {
+      char *objfile_basename;
+      objfile_basename = strrchr(objfile->name, '/');
+
+      if (objfile_basename &&
+	  strcmp(dll_basename, objfile_basename + 1) == 0)
+	{
+	  printf_unfiltered ("%x:%s (symbols previously loaded)\n",
+			     event->lpBaseOfDll, dll_name);
+	  goto out;
+	}
+  }
+
+  /* The symbols in a dll are offset by 0x1000, which is the
+     the offset from 0 of the first byte in an image - because
+     of the file header and the section alignment.
+
+     FIXME: Is this the real reason that we need the 0x1000 ? */
+
+  printf_unfiltered ("%x:%s", event->lpBaseOfDll, dll_name);
+  symbol_file_add (dll_name, 0, (int) event->lpBaseOfDll + 0x1000, 0, 0, 0, 0, 1);
+  printf_unfiltered ("\n");
+
+out:
+  return 1;
+}
+
+/* Handle DEBUG_STRING output from child process.
+   Cygwin prepends its messages with a "cygwin:".  Interpret this as
+   a Cygwin signal.  Otherwise just print the string as a warning. */
+static int
+handle_output_debug_string (struct target_waitstatus *ourstatus)
+{
+  char *s;
+  int gotasig = FALSE;
+
+  if (!target_read_string
+      ((CORE_ADDR) current_event.u.DebugString.lpDebugStringData, &s, 1024, 0)
+      || !s || !*s)
+    return gotasig;
+
+  if (strncmp(s, CYGWIN_SIGNAL_STRING, sizeof(CYGWIN_SIGNAL_STRING) - 1))
+    {
+      warning (s);
+    }
+  else
+    {
+      char *p;
+      /*last_sig = */strtol(s + sizeof(CYGWIN_SIGNAL_STRING) - 1, &p, 0);
+      if (gotasig = (ourstatus->value.sig = target_signal_from_host (last_sig)))
+	ourstatus->kind = TARGET_WAITKIND_STOPPED;
+    }
+
+  free (s);
+  return gotasig;
+}
+
+static int
+handle_exception (struct target_waitstatus *ourstatus)
+{
+  int i;
+  int done = 0;
+  thread_info *th;
+
+  ourstatus->kind = TARGET_WAITKIND_STOPPED;
+
+  /* Record the context of the current thread */
+  th = thread_rec (current_event.dwThreadId, -1);
+
+  switch (current_event.u.Exception.ExceptionRecord.ExceptionCode)
+    {
+    case EXCEPTION_ACCESS_VIOLATION:
+      DEBUG_EXCEPT (("gdb: Target exception ACCESS_VIOLATION at 0x%08x\n",
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
+      ourstatus->value.sig = TARGET_SIGNAL_SEGV;
+      break;
+    case STATUS_STACK_OVERFLOW:
+      DEBUG_EXCEPT (("gdb: Target exception STACK_OVERFLOW at 0x%08x\n",
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
+      ourstatus->value.sig = TARGET_SIGNAL_SEGV;
+      break;
+    case EXCEPTION_BREAKPOINT:
+      DEBUG_EXCEPT (("gdb: Target exception BREAKPOINT at 0x%08x\n",
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
+      ourstatus->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+    case DBG_CONTROL_C:
+      DEBUG_EXCEPT (("gdb: Target exception CONTROL_C at 0x%08x\n",
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
+      ourstatus->value.sig = TARGET_SIGNAL_INT;
+      /* User typed CTRL-C.  Continue with this status */
+      last_sig = SIGINT;	/* FIXME - should check pass state */
+      break;
+    case EXCEPTION_SINGLE_STEP:
+      DEBUG_EXCEPT (("gdb: Target exception SINGLE_STEP at 0x%08x\n",
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
+      ourstatus->value.sig = TARGET_SIGNAL_TRAP;
+      break;
+    default:
+      /* This may be a structured exception handling exception.  In
+	 that case, we want to let the program try to handle it, and
+	 only break if we see the exception a second time.  */
+      if (current_event.u.Exception.dwFirstChance)
+	return 0;
+
+      printf_unfiltered ("gdb: unknown target exception 0x%08x at 0x%08x\n",
+			 current_event.u.Exception.ExceptionRecord.ExceptionCode,
+			 current_event.u.Exception.ExceptionRecord.ExceptionAddress);
+      ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
+      break;
+    }
+  exception_count++;
+  return 1;
+}
+
+/* Resume all artificially suspended threads if we are continuing
+   execution */
+static BOOL
+child_continue (DWORD continue_status, int id)
+{
+  int i;
+  thread_info *th;
+  BOOL res;
+
+  DEBUG_EVENTS (("ContinueDebugEvent (cpid=%d, ctid=%d, DBG_CONTINUE);\n",
+		 current_event.dwProcessId, current_event.dwThreadId));
+  if (res = ContinueDebugEvent (current_event.dwProcessId,
+				current_event.dwThreadId,
+			        continue_status))
+    for (th = &thread_head; (th = th->next) != NULL; )
+      if (((id == -1) || (id == th->id)) && th->suspend_count)
+	{
+	  for (i = 0; i < th->suspend_count; i++)
+	    (void) ResumeThread (th->h);
+	  th->suspend_count = 0;
+	}
+
+  return res;
+}
+
+static int
+child_wait (int pid, struct target_waitstatus *ourstatus)
+{
+  /* We loop when we get a non-standard exception rather than return
+     with a SPURIOUS because resume can try and step or modify things,
+     which needs a current_thread->h.  But some of these exceptions mark
+     the birth or death of threads, which mean that the current thread
+     isn't necessarily what you think it is. */
+
+  while (1)
+    {
+      DWORD continue_status;
+      BOOL t = WaitForDebugEvent (&current_event, INFINITE);
+      char *p;
+      thread_info *th;
+      int sig;
+
+      event_count++;
+
+      continue_status = DBG_CONTINUE;
+
+      switch (current_event.dwDebugEventCode)
+	{
+	case CREATE_THREAD_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%x code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"CREATE_THREAD_DEBUG_EVENT"));
+	  /* Record the existence of this thread */
+	  child_add_thread (current_event.dwThreadId,
+			    current_event.u.CreateThread.hThread);
+	  if (info_verbose)
+	      printf_unfiltered ("[New %s]\n",
+			       target_pid_to_str (current_event.dwThreadId));
+	  break;
+
+	case EXIT_THREAD_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"EXIT_THREAD_DEBUG_EVENT"));
+	  child_delete_thread (current_event.dwThreadId);
+	  break;
+
+	case CREATE_PROCESS_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"CREATE_PROCESS_DEBUG_EVENT"));
+	  current_process_handle = current_event.u.CreateProcessInfo.hProcess;
+
+	  main_thread_id = inferior_pid = current_event.dwThreadId;
+	  /* Add the main thread */
+	  current_thread = child_add_thread (inferior_pid,
+				current_event.u.CreateProcessInfo.hThread);
+	  break;
+
+	case EXIT_PROCESS_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"EXIT_PROCESS_DEBUG_EVENT"));
+	  ourstatus->kind = TARGET_WAITKIND_EXITED;
+	  ourstatus->value.integer = current_event.u.ExitProcess.dwExitCode;
+	  CloseHandle (current_process_handle);
+	  return current_event.dwProcessId;
+	  break;
+
+	case LOAD_DLL_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"LOAD_DLL_DEBUG_EVENT"));
+          catch_errors (handle_load_dll, NULL, "", RETURN_MASK_ALL);
+	  registers_changed();          /* mark all regs invalid */
+	  break;
+
+	case UNLOAD_DLL_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"UNLOAD_DLL_DEBUG_EVENT"));
+	  break;	/* FIXME: don't know what to do here */
+
+	case EXCEPTION_DEBUG_EVENT:
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"EXCEPTION_DEBUG_EVENT"));
+	  if (handle_exception (ourstatus))
+	    return current_event.dwThreadId;
+	  continue_status = DBG_EXCEPTION_NOT_HANDLED;
+	  break;
+
+	case OUTPUT_DEBUG_STRING_EVENT: /* message from the kernel */
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
+			"OUTPUT_DEBUG_STRING_EVENT"));
+	  if (handle_output_debug_string (ourstatus))
+	    return main_thread_id;
+	  break;
+	default:
+	  printf_unfiltered ("gdb: kernel event for pid=%d tid=%d\n",
+			     current_event.dwProcessId,
+			     current_event.dwThreadId);
+	  printf_unfiltered ("                 unknown event code %d\n",
+			     current_event.dwDebugEventCode);
+	  break;
+	}
+
+      CHECK (child_continue (continue_status, -1));
+    }
+}
+
+/* Attach to process PID, then initialize for debugging it.  */
+
+static void
+child_attach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  BOOL ok;
+
+  if (!args)
+    error_no_arg ("process-id to attach");
+
+  current_event.dwProcessId = strtoul (args, 0, 0);
+
+  ok = DebugActiveProcess (current_event.dwProcessId);
+
+  if (!ok)
+    error ("Can't attach to process.");
+
+  exception_count = 0;
+  event_count = 0;
+
+  if (from_tty)
+    {
+      char *exec_file = (char *) get_exec_file (0);
+
+      if (exec_file)
+	printf_unfiltered ("Attaching to program `%s', %s\n", exec_file,
+			   target_pid_to_str (current_event.dwProcessId));
+      else
+	printf_unfiltered ("Attaching to %s\n",
+			   target_pid_to_str (current_event.dwProcessId));
+
+      gdb_flush (gdb_stdout);
+    }
+
+  push_target (&child_ops);
+}
+
+static void
+child_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (from_tty)
+    {
+      char *exec_file = get_exec_file (0);
+      if (exec_file == 0)
+	exec_file = "";
+      printf_unfiltered ("Detaching from program: %s %s\n", exec_file,
+			 target_pid_to_str (inferior_pid));
+      gdb_flush (gdb_stdout);
+    }
+  inferior_pid = 0;
+  unpush_target (&child_ops);
+}
+
+/* Print status information about what we're accessing.  */
+
+static void
+child_files_info (ignore)
+     struct target_ops *ignore;
+{
+  printf_unfiltered ("\tUsing the running image of %s %s.\n",
+      attach_flag ? "attached" : "child", target_pid_to_str (inferior_pid));
+}
+
+/* ARGSUSED */
+static void
+child_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a Unix child process.");
+}
+
+/* Start an inferior win32 child process and sets inferior_pid to its pid.
+   EXEC_FILE is the file to run.
+   ALLARGS is a string containing the arguments to the program.
+   ENV is the environment vector to pass.  Errors reported with error().  */
+
+static void
+child_create_inferior (exec_file, allargs, env)
+     char *exec_file;
+     char *allargs;
+     char **env;
+{
+  char real_path[MAXPATHLEN];
+  char *winenv;
+  char *temp;
+  int  envlen;
+  int i;
+
+  STARTUPINFO si;
+  PROCESS_INFORMATION pi;
+  struct target_waitstatus dummy;
+  BOOL ret;
+  DWORD flags;
+  char *args;
+
+  if (!exec_file)
+    {
+      error ("No executable specified, use `target exec'.\n");
+    }
+
+  memset (&si, 0, sizeof (si));
+  si.cb = sizeof (si);
+
+  cygwin32_conv_to_win32_path (exec_file, real_path);
+
+  flags = DEBUG_ONLY_THIS_PROCESS;
+
+  if (new_group)
+    flags |= CREATE_NEW_PROCESS_GROUP;
+
+  if (new_console)
+    flags |= CREATE_NEW_CONSOLE;
+
+  args = alloca (strlen (real_path) + strlen (allargs) + 2);
+
+  strcpy (args, real_path);
+
+  strcat (args, " ");
+  strcat (args, allargs);
+
+  /* Prepare the environment vars for CreateProcess.  */
+  {
+    /* This code use to assume all env vars were file names and would
+       translate them all to win32 style.  That obviously doesn't work in the
+       general case.  The current rule is that we only translate PATH.
+       We need to handle PATH because we're about to call CreateProcess and
+       it uses PATH to find DLL's.  Fortunately PATH has a well-defined value
+       in both posix and win32 environments.  cygwin.dll will change it back
+       to posix style if necessary.  */
+
+    static const char *conv_path_names[] =
+      {
+	"PATH=",
+	0
+      };
+
+    /* CreateProcess takes the environment list as a null terminated set of
+       strings (i.e. two nulls terminate the list).  */
+
+    /* Get total size for env strings.  */
+    for (envlen = 0, i = 0; env[i] && *env[i]; i++)
+      {
+	int j, len;
+
+	for (j = 0; conv_path_names[j]; j++)
+	  {
+	    len = strlen (conv_path_names[j]);
+	    if (strncmp (conv_path_names[j], env[i], len) == 0)
+	      {
+		if (cygwin32_posix_path_list_p (env[i] + len))
+		  envlen += len
+		    + cygwin32_posix_to_win32_path_list_buf_size (env[i] + len);
+		else
+		  envlen += strlen (env[i]) + 1;
+		break;
+	      }
+	  }
+	if (conv_path_names[j] == NULL)
+	  envlen += strlen (env[i]) + 1;
+      }
+
+    winenv = alloca (envlen + 1);
+
+    /* Copy env strings into new buffer.  */
+    for (temp = winenv, i = 0; env[i] && *env[i]; i++)
+      {
+	int j, len;
+
+	for (j = 0; conv_path_names[j]; j++)
+	  {
+	    len = strlen (conv_path_names[j]);
+	    if (strncmp (conv_path_names[j], env[i], len) == 0)
+	      {
+		if (cygwin32_posix_path_list_p (env[i] + len))
+		  {
+		    memcpy (temp, env[i], len);
+		    cygwin32_posix_to_win32_path_list (env[i] + len, temp + len);
+		  }
+		else
+		  strcpy (temp, env[i]);
+		break;
+	      }
+	  }
+	if (conv_path_names[j] == NULL)
+	  strcpy (temp, env[i]);
+
+	temp += strlen (temp) + 1;
+      }
+
+    /* Final nil string to terminate new env.  */
+    *temp = 0;
+  }
+
+  ret = CreateProcess (0,
+		       args, 	/* command line */
+		       NULL,	/* Security */
+		       NULL,	/* thread */
+		       TRUE,	/* inherit handles */
+		       flags,	/* start flags */
+		       winenv,
+		       NULL,	/* current directory */
+		       &si,
+		       &pi);
+  if (!ret)
+    error ("Error creating process %s, (error %d)\n", exec_file, GetLastError());
+
+  exception_count = 0;
+  event_count = 0;
+
+  current_process_handle = pi.hProcess;
+  current_event.dwProcessId = pi.dwProcessId;
+  memset (&current_event, 0, sizeof (current_event));
+  inferior_pid = current_event.dwThreadId = pi.dwThreadId;
+  push_target (&child_ops);
+  child_init_thread_list ();
+  init_wait_for_inferior ();
+  clear_proceed_status ();
+  target_terminal_init ();
+  target_terminal_inferior ();
+
+  /* Ignore the first trap */
+  child_wait (inferior_pid, &dummy);
+
+  proceed ((CORE_ADDR) - 1, TARGET_SIGNAL_0, 0);
+}
+
+static void
+child_mourn_inferior ()
+{
+  (void) child_continue (DBG_CONTINUE, -1);
+  unpush_target (&child_ops);
+  generic_mourn_inferior ();
+}
+
+/* Send a SIGINT to the process group.  This acts just like the user typed a
+   ^C on the controlling terminal. */
+
+static void
+child_stop ()
+{
+  DEBUG_EVENTS (("gdb: GenerateConsoleCtrlEvent (CTRLC_EVENT, 0)\n"));
+  CHECK (GenerateConsoleCtrlEvent (CTRL_C_EVENT, 0));
+  registers_changed();		/* refresh register state */
+}
+
+int
+child_xfer_memory (CORE_ADDR memaddr, char *our, int len,
+		   int write, struct target_ops *target)
+{
+  DWORD done;
+  if (write)
+    {
+      DEBUG_MEM (("gdb: write target memory, %d bytes at 0x%08x\n",
+		  len, memaddr));
+      WriteProcessMemory (current_process_handle, (LPVOID) memaddr, our,
+			  len, &done);
+      FlushInstructionCache (current_process_handle, (LPCVOID) memaddr, len);
+    }
+  else
+    {
+      DEBUG_MEM (("gdb: read target memory, %d bytes at 0x%08x\n",
+		  len, memaddr));
+      ReadProcessMemory (current_process_handle, (LPCVOID) memaddr, our, len,
+			 &done);
+    }
+  return done;
+}
+
+void
+child_kill_inferior (void)
+{
+  CHECK (TerminateProcess (current_process_handle, 0));
+
+  for (;;)
+    {
+      if (!child_continue (DBG_CONTINUE, -1))
+	break;
+      if (!WaitForDebugEvent (&current_event, INFINITE))
+	break;
+      if (current_event.dwDebugEventCode == EXIT_PROCESS_DEBUG_EVENT)
+	break;
+    }
+
+  CHECK (CloseHandle (current_process_handle));
+
+  /* this may fail in an attached process so don't check. */
+  (void) CloseHandle (current_thread->h);
+  target_mourn_inferior();	/* or just child_mourn_inferior? */
+}
+
+void
+child_resume (int pid, int step, enum target_signal sig)
+{
+  int i;
+  thread_info *th;
+  DWORD continue_status = last_sig > 0 && last_sig < NSIG ?
+			  DBG_EXCEPTION_NOT_HANDLED : DBG_CONTINUE;
+
+  DEBUG_EXEC (("gdb: child_resume (pid=%d, step=%d, sig=%d);\n",
+	       pid, step, sig));
+
+  /* Get context for currently selected thread */
+  th = thread_rec (current_event.dwThreadId, FALSE);
+  if (step)
+    {
+#ifdef i386
+      /* Single step by setting t bit */
+      child_fetch_inferior_registers (PS_REGNUM);
+      th->context.EFlags |= FLAG_TRACE_BIT;
+#endif
+    }
+
+  if (th->context.ContextFlags)
+    {
+      CHECK (SetThreadContext (th->h, &th->context));
+      th->context.ContextFlags = 0;
+    }
+
+  /* Allow continuing with the same signal that interrupted us.
+     Otherwise complain. */
+  if (sig && sig != last_sig)
+    fprintf_unfiltered (gdb_stderr, "Can't send signals to the child.  signal %d\n", sig);
+
+  last_sig = 0;
+  child_continue (continue_status, pid);
+}
+
+static void
+child_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static int
+child_can_run ()
+{
+  return 1;
+}
+
+static void
+child_close ()
+{
+  DEBUG_EVENTS (("gdb: child_close, inferior_pid=%d\n", inferior_pid));
+}
+
+struct target_ops child_ops ;
+
+static void 
+init_child_ops(void)
+{
+  child_ops.to_shortname =   "child";
+  child_ops.to_longname =   "Win32 child process";
+  child_ops.to_doc =   "Win32 child process (started by the \"run\" command).";
+  child_ops.to_open =   child_open;
+  child_ops.to_close =   child_close;
+  child_ops.to_attach =   child_attach;
+  child_ops.to_detach =   child_detach;
+  child_ops.to_resume =   child_resume;
+  child_ops.to_wait  =   child_wait;
+  child_ops.to_fetch_registers  =   child_fetch_inferior_registers;
+  child_ops.to_store_registers  =   child_store_inferior_registers;
+  child_ops.to_prepare_to_store =   child_prepare_to_store;
+  child_ops.to_xfer_memory  =   child_xfer_memory;
+  child_ops.to_files_info  =   child_files_info;
+  child_ops.to_insert_breakpoint =   memory_insert_breakpoint;
+  child_ops.to_remove_breakpoint =   memory_remove_breakpoint;
+  child_ops.to_terminal_init  =   terminal_init_inferior;
+  child_ops.to_terminal_inferior =   terminal_inferior;
+  child_ops.to_terminal_ours_for_output =   terminal_ours_for_output;
+  child_ops.to_terminal_ours  =   terminal_ours;
+  child_ops.to_terminal_info  =   child_terminal_info;
+  child_ops.to_kill  =   child_kill_inferior;
+  child_ops.to_load  =   0;
+  child_ops.to_lookup_symbol =   0;
+  child_ops.to_create_inferior =   child_create_inferior;
+  child_ops.to_mourn_inferior =   child_mourn_inferior;
+  child_ops.to_can_run  =   child_can_run;
+  child_ops.to_notice_signals =   0;
+  child_ops.to_thread_alive  =   win32_child_thread_alive;
+  child_ops.to_stop  =   child_stop;
+  child_ops.to_stratum =   process_stratum;
+  child_ops.DONT_USE =   0;
+  child_ops.to_has_all_memory =   1;
+  child_ops.to_has_memory =   1;
+  child_ops.to_has_stack =   1;
+  child_ops.to_has_registers =   1;
+  child_ops.to_has_execution =   1;
+  child_ops.to_sections =   0;
+  child_ops.to_sections_end =   0;
+  child_ops.to_magic =   OPS_MAGIC;
+}
+
+void
+_initialize_inftarg ()
+{
+  struct cmd_list_element *c;
+  init_child_ops() ;
+
+  add_show_from_set
+    (add_set_cmd ("new-console", class_support, var_boolean,
+		  (char *) &new_console,
+		  "Set creation of new console when creating child process.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("new-group", class_support, var_boolean,
+		  (char *) &new_group,
+		  "Set creation of new group when creating child process.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("debugexec", class_support, var_boolean,
+		  (char *) &debug_exec,
+		  "Set whether to display execution in child process.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("debugevents", class_support, var_boolean,
+		  (char *) &debug_events,
+		  "Set whether to display kernel events in child process.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("debugmemory", class_support, var_boolean,
+		  (char *) &debug_memory,
+		  "Set whether to display memory accesses in child process.",
+		  &setlist),
+     &showlist);
+
+  add_show_from_set
+    (add_set_cmd ("debugexceptions", class_support, var_boolean,
+		  (char *) &debug_exceptions,
+		  "Set whether to display kernel exceptions in child process.",
+		  &setlist),
+     &showlist);
+
+  add_target (&child_ops);
+}
+
+/* Determine if the thread referenced by "pid" is alive
+   by "polling" it.  If WaitForSingleObject returns WAIT_OBJECT_0
+   it means that the pid has died.  Otherwise it is assumed to be alive. */
+static int
+win32_child_thread_alive (int pid)
+{
+  return WaitForSingleObject(thread_rec (pid, FALSE)->h, 0) == WAIT_OBJECT_0 ?
+	 FALSE : TRUE;
+}
+
+/* Convert pid to printable format. */
+char *
+cygwin_pid_to_str (int pid)
+{
+  static char buf[80];
+  if (pid == current_event.dwProcessId)
+    sprintf (buf, "process %d", pid);
+  else
+    sprintf (buf, "thread %d.0x%x", current_event.dwProcessId, pid);
+  return buf;
+}
diff --git a/gdb/xcoffread.c b/gdb/xcoffread.c
new file mode 100644
index 0000000..0cf9371
--- /dev/null
+++ b/gdb/xcoffread.c
@@ -0,0 +1,2811 @@
+/* Read AIX xcoff symbol tables and convert to internal format, for GDB.
+   Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 1997
+   	     Free Software Foundation, Inc.
+   Derived from coffread.c, dbxread.c, and a lot of hacking.
+   Contributed by IBM Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "bfd.h"
+
+#include <sys/types.h>
+#include <fcntl.h>
+#include <ctype.h>
+#include "gdb_string.h"
+
+#include <sys/param.h>
+#ifndef	NO_SYS_FILE
+#include <sys/file.h>
+#endif
+#include "gdb_stat.h"
+
+#include "coff/internal.h"
+#include "libcoff.h"		/* FIXME, internal data from BFD */
+#include "coff/rs6000.h"
+
+#include "symtab.h"
+#include "gdbtypes.h"
+#include "symfile.h"
+#include "objfiles.h"
+#include "buildsym.h"
+#include "stabsread.h"
+#include "expression.h"
+#include "language.h"		/* Needed inside partial-stab.h */
+#include "complaints.h"
+
+#include "gdb-stabs.h"
+
+/* For interface with stabsread.c.  */
+#include "aout/stab_gnu.h"
+
+/* For interface with partial-stab.h.  */
+#define N_UNDF	0	/* Undefined symbol */
+#undef N_ABS
+#define N_ABS 2
+#define N_TEXT 	4	/* Text sym -- defined at offset in text seg */
+#define N_DATA 	6	/* Data sym -- defined at offset in data seg */
+#define N_BSS 	8	/* BSS  sym -- defined at offset in zero'd seg */
+#define	N_COMM	0x12	/* Common symbol (visible after shared lib dynlink) */
+#define N_FN	0x1f	/* File name of .o file */
+#define	N_FN_SEQ 0x0C	/* N_FN from Sequent compilers (sigh) */
+/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT,
+   N_DATA, or N_BSS.  When the low-order bit of other types is set,
+   (e.g. N_WARNING versus N_FN), they are two different types.  */
+#define N_EXT 	1	/* External symbol (as opposed to local-to-this-file) */
+#define N_INDR 0x0a
+
+/* The following symbols refer to set elements.
+   All the N_SET[ATDB] symbols with the same name form one set.
+   Space is allocated for the set in the text section, and each set
+   elements value is stored into one word of the space.
+   The first word of the space is the length of the set (number of elements).
+
+   The address of the set is made into an N_SETV symbol
+   whose name is the same as the name of the set.
+   This symbol acts like a N_DATA global symbol
+   in that it can satisfy undefined external references.  */
+
+/* These appear as input to LD, in a .o file.  */
+#define	N_SETA	0x14		/* Absolute set element symbol */
+#define	N_SETT	0x16		/* Text set element symbol */
+#define	N_SETD	0x18		/* Data set element symbol */
+#define	N_SETB	0x1A		/* Bss set element symbol */
+
+/* This is output from LD.  */
+#define N_SETV	0x1C		/* Pointer to set vector in data area.  */
+
+/* We put a pointer to this structure in the read_symtab_private field
+   of the psymtab.  */
+
+struct symloc {
+
+  /* First symbol number for this file.  */
+
+  int first_symnum;
+
+  /* Number of symbols in the section of the symbol table devoted to
+     this file's symbols (actually, the section bracketed may contain
+     more than just this file's symbols).  If numsyms is 0, the only
+     reason for this thing's existence is the dependency list.  Nothing
+     else will happen when it is read in.  */
+
+  int numsyms;
+
+  /* Position of the start of the line number information for this psymtab.  */
+  unsigned int lineno_off;
+};
+
+/* Remember what we deduced to be the source language of this psymtab. */
+
+static enum language psymtab_language = language_unknown;
+
+
+/* Simplified internal version of coff symbol table information */
+
+struct coff_symbol {
+  char *c_name;
+  int c_symnum;		/* symbol number of this entry */
+  int c_naux;		/* 0 if syment only, 1 if syment + auxent */
+  long c_value;
+  unsigned char c_sclass;
+  int c_secnum;
+  unsigned int c_type;
+};
+
+/* last function's saved coff symbol `cs' */
+
+static struct coff_symbol fcn_cs_saved;
+
+static bfd *symfile_bfd;
+
+/* Core address of start and end of text of current source file.
+   This is calculated from the first function seen after a C_FILE
+   symbol. */
+
+
+static CORE_ADDR cur_src_end_addr;
+
+/* Core address of the end of the first object file.  */
+
+static CORE_ADDR first_object_file_end;
+
+/* initial symbol-table-debug-string vector length */
+
+#define	INITIAL_STABVECTOR_LENGTH	40
+
+/* Nonzero if within a function (so symbols should be local,
+   if nothing says specifically).  */
+
+int within_function;
+
+/* Size of a COFF symbol.  I think it is always 18, so I'm not sure
+   there is any reason not to just use a #define, but might as well
+   ask BFD for the size and store it here, I guess.  */
+
+static unsigned	local_symesz;
+
+struct coff_symfile_info {
+  file_ptr min_lineno_offset;		/* Where in file lowest line#s are */
+  file_ptr max_lineno_offset;		/* 1+last byte of line#s in file */
+
+  /* Pointer to the string table.  */
+  char *strtbl;
+
+  /* Pointer to debug section.  */
+  char *debugsec;
+
+  /* Pointer to the a.out symbol table.  */
+  char *symtbl;
+
+  /* Number of symbols in symtbl.  */
+  int symtbl_num_syms;
+
+  /* Offset in data section to TOC anchor.  */
+  CORE_ADDR toc_offset;
+};
+
+static struct complaint storclass_complaint =
+  {"Unexpected storage class: %d", 0, 0};
+
+static struct complaint bf_notfound_complaint =
+  {"line numbers off, `.bf' symbol not found", 0, 0};
+
+static struct complaint ef_complaint = 
+  {"Mismatched .ef symbol ignored starting at symnum %d", 0, 0};
+
+static struct complaint eb_complaint = 
+  {"Mismatched .eb symbol ignored starting at symnum %d", 0, 0};
+
+static void
+xcoff_initial_scan PARAMS ((struct objfile *, struct section_offsets *, int));
+
+static void
+scan_xcoff_symtab PARAMS ((struct section_offsets *, struct objfile *));
+
+static char *
+xcoff_next_symbol_text PARAMS ((struct objfile *));
+
+static void
+record_include_begin PARAMS ((struct coff_symbol *));
+
+static void
+enter_line_range PARAMS ((struct subfile *, unsigned, unsigned,
+			  CORE_ADDR, CORE_ADDR, unsigned *));
+
+static void
+init_stringtab PARAMS ((bfd *, file_ptr, struct objfile *));
+
+static void
+xcoff_symfile_init PARAMS ((struct objfile *));
+
+static void
+xcoff_new_init PARAMS ((struct objfile *));
+
+static void
+xcoff_symfile_finish PARAMS ((struct objfile *));
+
+static struct section_offsets *
+xcoff_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
+
+static void
+find_linenos PARAMS ((bfd *, sec_ptr, PTR));
+
+static char *
+coff_getfilename PARAMS ((union internal_auxent *, struct objfile *));
+
+static void
+read_symbol PARAMS ((struct internal_syment *, int));
+
+static int
+read_symbol_lineno PARAMS ((int));
+
+static int
+read_symbol_nvalue PARAMS ((int));
+
+static struct symbol *
+process_xcoff_symbol PARAMS ((struct coff_symbol *, struct objfile *));
+
+static void
+read_xcoff_symtab PARAMS ((struct partial_symtab *));
+
+#if 0
+static void
+add_stab_to_list PARAMS ((char *, struct pending_stabs **));
+#endif
+
+static int
+compare_lte PARAMS ((const void *, const void *));
+
+static struct linetable *
+arrange_linetable PARAMS ((struct linetable *));
+
+static void
+record_include_end PARAMS ((struct coff_symbol *));
+
+static void
+process_linenos PARAMS ((CORE_ADDR, CORE_ADDR));
+
+
+/* Translate from a COFF section number (target_index) to a SECT_OFF_*
+   code.  */
+static int secnum_to_section PARAMS ((int, struct objfile *));
+static asection * secnum_to_bfd_section PARAMS ((int, struct objfile *));
+
+struct find_targ_sec_arg {
+  int targ_index;
+  int *resultp;
+  asection **bfd_sect;
+};
+
+static void find_targ_sec PARAMS ((bfd *, asection *, void *));
+
+static void find_targ_sec (abfd, sect, obj)
+     bfd *abfd;
+     asection *sect;
+     PTR obj;
+{
+  struct find_targ_sec_arg *args = (struct find_targ_sec_arg *)obj;
+  if (sect->target_index == args->targ_index)
+    {
+      /* This is the section.  Figure out what SECT_OFF_* code it is.  */
+      if (bfd_get_section_flags (abfd, sect) & SEC_CODE)
+	*args->resultp = SECT_OFF_TEXT;
+      else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
+	*args->resultp = SECT_OFF_DATA;
+      else
+	*args->resultp = SECT_OFF_BSS;
+      *args->bfd_sect = sect;
+    }
+}
+
+/* Return the section number (SECT_OFF_*) that CS points to.  */
+static int
+secnum_to_section (secnum, objfile)
+     int secnum;
+     struct objfile *objfile;
+{
+  int off = SECT_OFF_TEXT;
+  asection *sect = NULL;
+  struct find_targ_sec_arg args;
+  args.targ_index = secnum;
+  args.resultp = &off;
+  args.bfd_sect = &sect;
+  bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+  return off;
+}
+
+/* Return the BFD section that CS points to.  */
+static asection *
+secnum_to_bfd_section (secnum, objfile)
+     int secnum;
+     struct objfile *objfile;
+{
+  int off = SECT_OFF_TEXT;
+  asection *sect = NULL;
+  struct find_targ_sec_arg args;
+  args.targ_index = secnum;
+  args.resultp = &off;
+  args.bfd_sect = &sect;
+  bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+  return sect;
+}
+
+/* add a given stab string into given stab vector. */
+
+#if 0
+
+static void
+add_stab_to_list (stabname, stabvector)
+char *stabname;
+struct pending_stabs **stabvector;
+{
+  if ( *stabvector == NULL) {
+    *stabvector = (struct pending_stabs *)
+	xmalloc (sizeof (struct pending_stabs) + 
+			INITIAL_STABVECTOR_LENGTH * sizeof (char*));
+    (*stabvector)->count = 0;
+    (*stabvector)->length = INITIAL_STABVECTOR_LENGTH;
+  }
+  else if ((*stabvector)->count >= (*stabvector)->length) {
+    (*stabvector)->length += INITIAL_STABVECTOR_LENGTH;
+    *stabvector = (struct pending_stabs *)
+	xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) + 
+	(*stabvector)->length * sizeof (char*));
+  }
+  (*stabvector)->stab [(*stabvector)->count++] = stabname;
+}
+
+#endif
+
+
+/* Linenos are processed on a file-by-file basis.
+
+   Two reasons:
+
+    1) xlc (IBM's native c compiler) postpones static function code
+       emission to the end of a compilation unit. This way it can
+       determine if those functions (statics) are needed or not, and
+       can do some garbage collection (I think). This makes line
+       numbers and corresponding addresses unordered, and we end up
+       with a line table like:
+       
+
+		lineno	addr
+        foo()	  10	0x100
+		  20	0x200
+		  30	0x300
+
+	foo3()	  70	0x400
+		  80	0x500
+		  90	0x600
+
+	static foo2()
+		  40	0x700
+		  50	0x800
+		  60	0x900		
+
+	and that breaks gdb's binary search on line numbers, if the
+	above table is not sorted on line numbers. And that sort
+	should be on function based, since gcc can emit line numbers
+	like:
+	
+		10	0x100	- for the init/test part of a for stmt.
+		20	0x200
+		30	0x300
+		10	0x400	- for the increment part of a for stmt.
+
+	arrange_linetable() will do this sorting.		
+
+     2)	aix symbol table might look like:
+
+		c_file		// beginning of a new file
+		.bi		// beginning of include file
+		.ei		// end of include file
+		.bi
+		.ei
+
+	basically, .bi/.ei pairs do not necessarily encapsulate
+	their scope. They need to be recorded, and processed later
+	on when we come the end of the compilation unit.
+	Include table (inclTable) and process_linenos() handle
+	that.  */
+
+/* compare line table entry addresses. */
+
+static int
+compare_lte (lte1p, lte2p)
+     const void *lte1p;
+     const void *lte2p;
+{
+  struct linetable_entry *lte1 = (struct linetable_entry *) lte1p;
+  struct linetable_entry *lte2 = (struct linetable_entry *) lte2p;
+  return lte1->pc - lte2->pc;
+}
+
+/* Given a line table with function entries are marked, arrange its functions
+   in ascending order and strip off function entry markers and return it in
+   a newly created table. If the old one is good enough, return the old one. */
+/* FIXME: I think all this stuff can be replaced by just passing
+   sort_linevec = 1 to end_symtab.  */
+
+static struct linetable *
+arrange_linetable (oldLineTb)
+     struct linetable *oldLineTb;			/* old linetable */
+{
+  int ii, jj, 
+      newline, 					/* new line count */
+      function_count;				/* # of functions */
+
+  struct linetable_entry *fentry;		/* function entry vector */
+  int fentry_size;				/* # of function entries */
+  struct linetable *newLineTb;			/* new line table */
+
+#define NUM_OF_FUNCTIONS 20
+
+  fentry_size = NUM_OF_FUNCTIONS;
+  fentry = (struct linetable_entry*)
+    xmalloc (fentry_size * sizeof (struct linetable_entry));
+
+  for (function_count=0, ii=0; ii <oldLineTb->nitems; ++ii) {
+
+    if (oldLineTb->item[ii].line == 0) {	/* function entry found. */
+
+      if (function_count >= fentry_size) {	/* make sure you have room. */
+	fentry_size *= 2;
+	fentry = (struct linetable_entry*) 
+	  xrealloc (fentry, fentry_size * sizeof (struct linetable_entry));
+      }
+      fentry[function_count].line = ii;
+      fentry[function_count].pc = oldLineTb->item[ii].pc;
+      ++function_count;
+    }
+  }
+
+  if (function_count == 0) {
+    free (fentry);
+    return oldLineTb;
+  }
+  else if (function_count > 1)
+    qsort (fentry, function_count, sizeof(struct linetable_entry), compare_lte);
+
+  /* allocate a new line table. */
+  newLineTb = (struct linetable *)
+    xmalloc
+      (sizeof (struct linetable) + 
+       (oldLineTb->nitems - function_count) * sizeof (struct linetable_entry));
+
+  /* if line table does not start with a function beginning, copy up until
+     a function begin. */
+
+  newline = 0;
+  if (oldLineTb->item[0].line != 0)
+    for (newline=0; 
+	newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline)
+      newLineTb->item[newline] = oldLineTb->item[newline];
+
+  /* Now copy function lines one by one. */
+
+  for (ii=0; ii < function_count; ++ii) {
+    for (jj = fentry[ii].line + 1;
+	         jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0; 
+							 ++jj, ++newline)
+      newLineTb->item[newline] = oldLineTb->item[jj];
+  }
+  free (fentry);
+  newLineTb->nitems = oldLineTb->nitems - function_count;
+  return newLineTb;  
+}     
+
+/* include file support: C_BINCL/C_EINCL pairs will be kept in the 
+   following `IncludeChain'. At the end of each symtab (end_symtab),
+   we will determine if we should create additional symtab's to
+   represent if (the include files. */
+
+
+typedef struct _inclTable {
+  char		*name;				/* include filename */
+
+  /* Offsets to the line table.  end points to the last entry which is
+     part of this include file.  */
+  int		begin, end;
+  
+  struct subfile *subfile;
+  unsigned	funStartLine;			/* start line # of its function */
+} InclTable;
+
+#define	INITIAL_INCLUDE_TABLE_LENGTH	20
+static InclTable  *inclTable;			/* global include table */
+static int	  inclIndx;			/* last entry to table */
+static int	  inclLength;			/* table length */
+static int	  inclDepth;			/* nested include depth */
+
+static void allocate_include_entry PARAMS ((void));
+
+static void
+record_include_begin (cs)
+struct coff_symbol *cs;
+{
+  if (inclDepth)
+    {
+      /* In xcoff, we assume include files cannot be nested (not in .c files
+	 of course, but in corresponding .s files.).  */
+
+      /* This can happen with old versions of GCC.
+	 GCC 2.3.3-930426 does not exhibit this on a test case which
+	 a user said produced the message for him.  */
+      static struct complaint msg = {"Nested C_BINCL symbols", 0, 0};
+      complain (&msg);
+    }
+  ++inclDepth;
+
+  allocate_include_entry ();
+
+  inclTable [inclIndx].name  = cs->c_name;
+  inclTable [inclIndx].begin = cs->c_value;
+}
+
+static void
+record_include_end (cs)
+struct coff_symbol *cs;
+{
+  InclTable *pTbl;  
+
+  if (inclDepth == 0)
+    {
+      static struct complaint msg = {"Mismatched C_BINCL/C_EINCL pair", 0, 0};
+      complain (&msg);
+    }
+
+  allocate_include_entry ();
+
+  pTbl = &inclTable [inclIndx];
+  pTbl->end = cs->c_value;
+
+  --inclDepth;
+  ++inclIndx;
+}
+
+static void
+allocate_include_entry ()
+{
+  if (inclTable == NULL)
+    {
+      inclTable = (InclTable *) 
+	xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
+      memset (inclTable,
+	      '\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
+      inclLength = INITIAL_INCLUDE_TABLE_LENGTH;
+      inclIndx = 0;
+    }
+  else if (inclIndx >= inclLength)
+    {
+      inclLength += INITIAL_INCLUDE_TABLE_LENGTH;
+      inclTable = (InclTable *) 
+	xrealloc (inclTable, sizeof (InclTable) * inclLength);
+      memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH, 
+	      '\0', sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH);
+    }
+}
+
+/* Global variable to pass the psymtab down to all the routines involved
+   in psymtab to symtab processing.  */
+static struct partial_symtab *this_symtab_psymtab;
+
+/* given the start and end addresses of a compilation unit (or a csect,
+   at times) process its lines and create appropriate line vectors. */
+
+static void
+process_linenos (start, end)
+     CORE_ADDR start, end;
+{
+  int offset, ii;
+  file_ptr max_offset =
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->max_lineno_offset;
+
+  /* subfile structure for the main compilation unit.  */
+  struct subfile main_subfile;
+
+  /* In the main source file, any time we see a function entry, we
+     reset this variable to function's absolute starting line number.
+     All the following line numbers in the function are relative to
+     this, and we record absolute line numbers in record_line().  */
+
+  unsigned int main_source_baseline = 0;
+
+  unsigned *firstLine;
+
+  offset =
+    ((struct symloc *)this_symtab_psymtab->read_symtab_private)->lineno_off;
+  if (offset == 0)
+    goto return_after_cleanup;
+
+  memset (&main_subfile, '\0', sizeof (main_subfile));
+
+  if (inclIndx == 0)
+    /* All source lines were in the main source file. None in include files. */
+
+    enter_line_range (&main_subfile, offset, 0, start, end, 
+    						&main_source_baseline);
+
+  else
+    {
+      /* There was source with line numbers in include files.  */
+      main_source_baseline = 0;
+      for (ii=0; ii < inclIndx; ++ii)
+	{
+	  struct subfile *tmpSubfile;
+
+	  /* If there is main file source before include file, enter it.  */
+	  if (offset < inclTable[ii].begin)
+	    {
+	      enter_line_range
+		(&main_subfile, offset, inclTable[ii].begin - LINESZ,
+		 start, 0, &main_source_baseline);
+	    }
+
+	  /* Have a new subfile for the include file.  */
+
+	  tmpSubfile = inclTable[ii].subfile =
+	    (struct subfile *) xmalloc (sizeof (struct subfile));
+
+	  memset (tmpSubfile, '\0', sizeof (struct subfile));
+	  firstLine = &(inclTable[ii].funStartLine);
+
+	  /* Enter include file's lines now.  */
+	  enter_line_range (tmpSubfile, inclTable[ii].begin, 
+			    inclTable[ii].end, start, 0, firstLine);
+
+	  if (offset <= inclTable[ii].end)
+	    offset = inclTable[ii].end + LINESZ;
+	}
+
+      /* All the include files' line have been processed at this point.  Now,
+	 enter remaining lines of the main file, if any left.  */
+      if (offset < max_offset + 1 - LINESZ)
+	{
+	  enter_line_range (&main_subfile, offset, 0, start, end, 
+			    &main_source_baseline);
+	}
+    }
+
+  /* Process main file's line numbers.  */
+  if (main_subfile.line_vector)
+    {
+      struct linetable *lineTb, *lv;
+
+      lv = main_subfile.line_vector;
+
+      /* Line numbers are not necessarily ordered. xlc compilation will
+	 put static function to the end. */
+
+      lineTb = arrange_linetable (lv);
+      if (lv == lineTb)
+	{
+	  current_subfile->line_vector = (struct linetable *)
+	    xrealloc (lv, (sizeof (struct linetable)
+			   + lv->nitems * sizeof (struct linetable_entry)));
+	}
+      else
+	{
+	  free (lv);
+	  current_subfile->line_vector = lineTb;
+	}
+
+      current_subfile->line_vector_length = 
+	current_subfile->line_vector->nitems;
+    }
+
+  /* Now, process included files' line numbers.  */
+
+  for (ii=0; ii < inclIndx; ++ii)
+    {
+      if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */
+	{
+	  struct linetable *lineTb, *lv;
+
+	  lv = (inclTable[ii].subfile)->line_vector;
+
+	  /* Line numbers are not necessarily ordered. xlc compilation will
+	     put static function to the end. */
+
+	  lineTb = arrange_linetable (lv);
+
+	  push_subfile ();
+
+	  /* For the same include file, we might want to have more than one
+	     subfile.  This happens if we have something like:
+
+  		......
+	        #include "foo.h"
+		......
+	 	#include "foo.h"
+		......
+
+	     while foo.h including code in it. (stupid but possible)
+	     Since start_subfile() looks at the name and uses an
+	     existing one if finds, we need to provide a fake name and
+	     fool it.  */
+
+#if 0
+	  start_subfile (inclTable[ii].name, (char*)0);
+#else
+	  {
+	    /* Pick a fake name that will produce the same results as this
+	       one when passed to deduce_language_from_filename.  Kludge on
+	       top of kludge.  */
+	    char *fakename = strrchr (inclTable[ii].name, '.');
+	    if (fakename == NULL)
+	      fakename = " ?";
+	    start_subfile (fakename, (char*)0);
+	    free (current_subfile->name);
+	  }
+	  current_subfile->name = strdup (inclTable[ii].name);
+#endif
+
+	  if (lv == lineTb)
+	    {
+	      current_subfile->line_vector =
+		(struct linetable *) xrealloc
+		  (lv, (sizeof (struct linetable)
+			+ lv->nitems * sizeof (struct linetable_entry)));
+
+	    }
+	  else
+	    {
+	      free (lv);
+	      current_subfile->line_vector = lineTb;
+	    }
+
+	  current_subfile->line_vector_length = 
+	    current_subfile->line_vector->nitems;
+	  start_subfile (pop_subfile (), (char*)0);
+	}
+    }
+
+ return_after_cleanup:
+
+  /* We don't want to keep alloc/free'ing the global include file table.  */
+  inclIndx = 0;
+
+  /* Start with a fresh subfile structure for the next file.  */
+  memset (&main_subfile, '\0', sizeof (struct subfile));
+}
+
+void
+aix_process_linenos ()
+{
+  /* process line numbers and enter them into line vector */
+  process_linenos (last_source_start_addr, cur_src_end_addr);
+}
+
+
+/* Enter a given range of lines into the line vector.
+   can be called in the following two ways:
+     enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine)  or
+     enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine)
+
+   endoffset points to the last line table entry that we should pay
+   attention to.  */
+
+static void
+enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr,
+		  firstLine)
+     struct subfile *subfile;
+     unsigned   beginoffset, endoffset;	/* offsets to line table */
+     CORE_ADDR  startaddr, endaddr;
+     unsigned   *firstLine;
+{
+  unsigned int curoffset;
+  CORE_ADDR addr;
+  struct external_lineno ext_lnno;
+  struct internal_lineno int_lnno;
+  unsigned int limit_offset;
+  bfd *abfd;
+
+  if (endoffset == 0 && startaddr == 0 && endaddr == 0)
+    return;
+  curoffset = beginoffset;
+  limit_offset =
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->max_lineno_offset;
+
+  if (endoffset != 0)
+    {
+      if (endoffset >= limit_offset)
+	{
+	  static struct complaint msg =
+	    {"Bad line table offset in C_EINCL directive", 0, 0};
+	  complain (&msg);
+	  return;
+	}
+      limit_offset = endoffset;
+    }
+  else
+    limit_offset -= 1;
+  abfd = this_symtab_psymtab->objfile->obfd;
+
+  while (curoffset <= limit_offset)
+    {
+      bfd_seek (abfd, curoffset, SEEK_SET);
+      bfd_read (&ext_lnno, sizeof (struct external_lineno), 1, abfd);
+      bfd_coff_swap_lineno_in (abfd, &ext_lnno, &int_lnno);
+
+      /* Find the address this line represents.  */
+      addr = (int_lnno.l_lnno
+	      ? int_lnno.l_addr.l_paddr
+	      : read_symbol_nvalue (int_lnno.l_addr.l_symndx));
+      addr += ANOFFSET (this_symtab_psymtab->objfile->section_offsets,
+			SECT_OFF_TEXT);
+
+      if (addr < startaddr || (endaddr && addr >= endaddr))
+	return;
+
+      if (int_lnno.l_lnno == 0)
+	{
+	  *firstLine = read_symbol_lineno (int_lnno.l_addr.l_symndx);
+	  record_line (subfile, 0, addr);
+	  --(*firstLine);
+	}
+      else
+	record_line (subfile, *firstLine + int_lnno.l_lnno, addr);
+      curoffset += LINESZ;
+    }
+}
+
+
+/* Save the vital information for use when closing off the current file.
+   NAME is the file name the symbols came from, START_ADDR is the first
+   text address for the file, and SIZE is the number of bytes of text.  */
+
+#define complete_symtab(name, start_addr) {	\
+  last_source_file = savestring (name, strlen (name));	\
+  last_source_start_addr = start_addr;			\
+}
+
+
+/* Refill the symbol table input buffer
+   and set the variables that control fetching entries from it.
+   Reports an error if no data available.
+   This function can read past the end of the symbol table
+   (into the string table) but this does no harm.  */
+
+/* Reading symbol table has to be fast! Keep the followings as macros, rather
+   than functions. */
+
+#define	RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, SECTION, OBJFILE) \
+{						\
+  char *namestr;				\
+  namestr = (NAME); \
+  if (namestr[0] == '.') ++namestr; \
+  prim_record_minimal_symbol_and_info (namestr, (ADDR), (TYPE), \
+				       (char *)NULL, (SECTION), (asection *)NULL, (OBJFILE)); \
+  misc_func_recorded = 1;					\
+}
+
+
+/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
+   nested. At any given time, a symbol can only be in one static block.
+   This is the base address of current static block, zero if non exists. */
+   
+static int static_block_base = 0;
+
+/* Section number for the current static block.  */
+
+static int static_block_section = -1;
+
+/* true if space for symbol name has been allocated. */
+
+static int symname_alloced = 0;
+
+/* Next symbol to read.  Pointer into raw seething symbol table.  */
+
+static char *raw_symbol;
+
+/* This is the function which stabsread.c calls to get symbol
+   continuations.  */
+
+static char *
+xcoff_next_symbol_text (objfile)
+     struct objfile *objfile;
+{
+  struct internal_syment symbol;
+  static struct complaint msg =
+    {"Unexpected symbol continuation", 0, 0};
+  char *retval;
+  /* FIXME: is this the same as the passed arg? */
+  objfile = this_symtab_psymtab->objfile;
+
+  bfd_coff_swap_sym_in (objfile->obfd, raw_symbol, &symbol);
+  if (symbol.n_zeroes)
+    {
+      complain (&msg);
+
+      /* Return something which points to '\0' and hope the symbol reading
+	 code does something reasonable.  */
+      retval = "";
+    }
+  else if (symbol.n_sclass & 0x80)
+    {
+      retval =
+	((struct coff_symfile_info *)objfile->sym_private)->debugsec
+	  + symbol.n_offset;
+      raw_symbol +=
+	coff_data (objfile->obfd)->local_symesz;
+      ++symnum;
+    }
+  else
+    {
+      complain (&msg);
+
+      /* Return something which points to '\0' and hope the symbol reading
+	 code does something reasonable.  */
+      retval = "";
+    }
+  return retval;
+}
+
+/* Read symbols for a given partial symbol table.  */
+
+static void
+read_xcoff_symtab (pst)
+     struct partial_symtab *pst;
+{
+  struct objfile *objfile = pst->objfile;
+  bfd *abfd = objfile->obfd;
+  char *raw_auxptr;		/* Pointer to first raw aux entry for sym */
+  char *strtbl = ((struct coff_symfile_info *)objfile->sym_private)->strtbl;
+  char *debugsec =
+    ((struct coff_symfile_info *)objfile->sym_private)->debugsec;
+
+  struct internal_syment symbol[1];
+  union internal_auxent main_aux;
+  struct coff_symbol cs[1];
+  CORE_ADDR file_start_addr = 0;
+  CORE_ADDR file_end_addr = 0;
+
+  int next_file_symnum = -1;
+  unsigned int max_symnum;
+  int just_started = 1;
+  int depth = 0;
+  int fcn_start_addr = 0;
+
+  struct coff_symbol fcn_stab_saved;
+
+  /* fcn_cs_saved is global because process_xcoff_symbol needs it. */
+  union internal_auxent fcn_aux_saved;
+  struct context_stack *new;
+
+  char *filestring = " _start_ ";	/* Name of the current file. */
+
+  char *last_csect_name;		/* last seen csect's name and value */
+  CORE_ADDR last_csect_val;
+  int last_csect_sec;
+
+  this_symtab_psymtab = pst;
+
+  /* Get the appropriate COFF "constants" related to the file we're
+     handling. */
+  local_symesz = coff_data (abfd)->local_symesz;
+
+  last_source_file = NULL;
+  last_csect_name = 0;
+  last_csect_val = 0;
+
+  start_stabs ();
+  start_symtab (filestring, (char *)NULL, file_start_addr);
+  record_debugformat ("XCOFF");
+  symnum = ((struct symloc *)pst->read_symtab_private)->first_symnum;
+  max_symnum =
+    symnum + ((struct symloc *)pst->read_symtab_private)->numsyms;
+  first_object_file_end = 0;
+
+  raw_symbol =
+    ((struct coff_symfile_info *) objfile->sym_private)->symtbl
+      + symnum * local_symesz;
+
+  while (symnum < max_symnum)
+    {
+
+      QUIT;			/* make this command interruptable.  */
+
+      /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
+      /* read one symbol into `cs' structure. After processing the
+	 whole symbol table, only string table will be kept in memory,
+	 symbol table and debug section of xcoff will be freed. Thus
+	 we can mark symbols with names in string table as
+	 `alloced'. */
+      {
+	int ii;
+
+	/* Swap and align the symbol into a reasonable C structure.  */
+	bfd_coff_swap_sym_in (abfd, raw_symbol, symbol);
+
+	cs->c_symnum = symnum;
+	cs->c_naux = symbol->n_numaux;
+	if (symbol->n_zeroes)
+	  {
+	    symname_alloced = 0;
+	    /* We must use the original, unswapped, name here so the name field
+	       pointed to by cs->c_name will persist throughout xcoffread.  If
+	       we use the new field, it gets overwritten for each symbol.  */
+	    cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name;
+	    /* If it's exactly E_SYMNMLEN characters long it isn't
+	       '\0'-terminated.  */
+	    if (cs->c_name[E_SYMNMLEN - 1] != '\0')
+	      {
+		char *p;
+		p = obstack_alloc (&objfile->symbol_obstack, E_SYMNMLEN + 1);
+		strncpy (p, cs->c_name, E_SYMNMLEN);
+		p[E_SYMNMLEN] = '\0';
+		cs->c_name = p;
+		symname_alloced = 1;
+	      }
+	  }
+	else if (symbol->n_sclass & 0x80)
+	  {
+	    cs->c_name = debugsec + symbol->n_offset;
+	    symname_alloced = 0;
+	  }
+	else
+	  {
+	    /* in string table */
+	    cs->c_name = strtbl + (int)symbol->n_offset;
+	    symname_alloced = 1;
+	  }
+	cs->c_value = symbol->n_value;
+	cs->c_sclass = symbol->n_sclass;
+	cs->c_secnum = symbol->n_scnum;
+	cs->c_type = (unsigned)symbol->n_type;
+
+	raw_symbol += coff_data (abfd)->local_symesz;
+	++symnum;
+
+	/* Save addr of first aux entry.  */
+	raw_auxptr = raw_symbol;
+
+	/* Skip all the auxents associated with this symbol.  */
+	for (ii = symbol->n_numaux; ii; --ii)
+	  {
+	    raw_symbol += coff_data (abfd)->local_auxesz;
+	    ++symnum;
+	  }
+      }
+
+      /* if symbol name starts with ".$" or "$", ignore it. */
+      if (cs->c_name[0] == '$'
+	  || (cs->c_name[1] == '$' && cs->c_name[0] == '.'))
+	continue;
+
+      if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE)
+	{
+	  if (last_source_file)
+	    {
+	      pst->symtab =
+		end_symtab (cur_src_end_addr, objfile, SECT_OFF_TEXT);
+	      end_stabs ();
+	    }
+
+	  start_stabs ();
+	  start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0);
+	  record_debugformat ("XCOFF");
+	  cur_src_end_addr = first_object_file_end;
+	  /* done with all files, everything from here on is globals */
+	}
+
+      /* if explicitly specified as a function, treat is as one. */
+      if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF)
+	{
+	  bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+				0, cs->c_naux, &main_aux);
+	  goto function_entry_point;
+	}
+
+      if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT)
+	  && cs->c_naux == 1)
+	{
+	  /* Dealing with a symbol with a csect entry.  */
+
+#define	CSECT(PP) ((PP)->x_csect)
+#define	CSECT_LEN(PP) (CSECT(PP).x_scnlen.l)
+#define	CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp))
+#define	CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
+#define	CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
+
+	  /* Convert the auxent to something we can access.  */
+	  bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+				0, cs->c_naux, &main_aux);
+
+	  switch (CSECT_SMTYP (&main_aux))
+	    {
+
+	    case XTY_ER:
+	      /* Ignore all external references.  */
+	      continue;
+
+	    case XTY_SD:
+	      /* A section description.  */
+	      {
+		switch (CSECT_SCLAS (&main_aux))
+		  {
+
+		  case XMC_PR:
+		    {
+
+		      /* A program csect is seen.  We have to allocate one
+			 symbol table for each program csect.  Normally gdb
+			 prefers one symtab for each source file.  In case
+			 of AIX, one source file might include more than one
+			 [PR] csect, and they don't have to be adjacent in
+			 terms of the space they occupy in memory. Thus, one
+			 single source file might get fragmented in the
+			 memory and gdb's file start and end address
+			 approach does not work!  GCC (and I think xlc) seem
+			 to put all the code in the unnamed program csect.  */
+
+		      if (last_csect_name)
+			{
+			  complete_symtab (filestring, file_start_addr);
+			  cur_src_end_addr = file_end_addr;
+			  end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+			  end_stabs ();
+			  start_stabs ();
+			  /* Give all csects for this source file the same
+			     name.  */
+			  start_symtab (filestring, NULL, (CORE_ADDR)0);
+			  record_debugformat ("XCOFF");
+			}
+
+		      /* If this is the very first csect seen,
+			 basically `__start'. */
+		      if (just_started)
+			{
+			  first_object_file_end
+			    = cs->c_value + CSECT_LEN (&main_aux);
+			  just_started = 0;
+			}
+
+		      file_start_addr =
+			cs->c_value + ANOFFSET (objfile->section_offsets,
+						SECT_OFF_TEXT);
+		      file_end_addr = file_start_addr + CSECT_LEN (&main_aux);
+
+		      if (cs->c_name && cs->c_name[0] == '.')
+			{
+			  last_csect_name = cs->c_name;
+			  last_csect_val = cs->c_value;
+			  last_csect_sec = secnum_to_section (cs->c_secnum, objfile);
+			}
+		    }
+		    continue;
+
+		    /* All other symbols are put into the minimal symbol
+		       table only.  */
+
+		  case XMC_RW:
+		    continue;
+
+		  case XMC_TC0:
+		    continue;
+
+		  case XMC_TC:
+		    continue;
+
+		  default:
+		    /* Ignore the symbol.  */
+		    continue;
+		  }
+	      }
+	      break;
+
+	    case XTY_LD:
+
+	      switch (CSECT_SCLAS (&main_aux))
+		{
+		case XMC_PR:
+		  /* a function entry point. */
+		function_entry_point:
+
+		  fcn_start_addr = cs->c_value;
+
+		  /* save the function header info, which will be used
+		     when `.bf' is seen. */
+		  fcn_cs_saved = *cs;
+		  fcn_aux_saved = main_aux;
+		  continue;
+
+		case XMC_GL:
+		  /* shared library function trampoline code entry point. */
+		  continue;
+
+		case XMC_DS:
+		  /* The symbols often have the same names as debug symbols for
+		     functions, and confuse lookup_symbol.  */
+		  continue;
+
+		default:
+		  /* xlc puts each variable in a separate csect, so we get
+		     an XTY_SD for each variable.  But gcc puts several
+		     variables in a csect, so that each variable only gets
+		     an XTY_LD. This will typically be XMC_RW; I suspect
+		     XMC_RO and XMC_BS might be possible too.
+		     These variables are put in the minimal symbol table
+		     only.  */
+		  continue;
+		}
+	      break;
+
+	    case XTY_CM:
+	      /* Common symbols are put into the minimal symbol table only.  */
+	      continue;
+
+	    default:
+	      break;
+	    }
+	}
+
+      switch (cs->c_sclass)
+	{
+
+	case C_FILE:
+
+	  /* c_value field contains symnum of next .file entry in table
+	     or symnum of first global after last .file. */
+
+	  next_file_symnum = cs->c_value;
+
+	  /* Complete symbol table for last object file containing
+	     debugging information. */
+
+	  /* Whether or not there was a csect in the previous file, we
+	     have to call `end_stabs' and `start_stabs' to reset
+	     type_vector, line_vector, etc. structures.  */
+
+	  complete_symtab (filestring, file_start_addr);
+	  cur_src_end_addr = file_end_addr;
+	  end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+	  end_stabs ();
+
+	  /* XCOFF, according to the AIX 3.2 documentation, puts the filename
+	     in cs->c_name.  But xlc 1.3.0.2 has decided to do things the
+	     standard COFF way and put it in the auxent.  We use the auxent if
+	     the symbol is ".file" and an auxent exists, otherwise use the symbol
+	     itself.  Simple enough.  */
+	  if (!strcmp (cs->c_name, ".file") && cs->c_naux > 0)
+	    {
+	      bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+				    0, cs->c_naux, &main_aux);
+	      filestring = coff_getfilename (&main_aux, objfile);
+	    }
+	  else
+	    filestring = cs->c_name;
+
+	  start_stabs ();
+	  start_symtab (filestring, (char *)NULL, (CORE_ADDR)0);
+	  record_debugformat ("XCOFF");
+	  last_csect_name = 0;
+
+	  /* reset file start and end addresses. A compilation unit with no text
+	     (only data) should have zero file boundaries. */
+	  file_start_addr = file_end_addr = 0;
+	  break;
+
+	case C_FUN:
+	  fcn_stab_saved = *cs;
+	  break;
+
+	case C_FCN:
+	  if (STREQ (cs->c_name, ".bf"))
+	    {
+	      CORE_ADDR off = ANOFFSET (objfile->section_offsets,
+					SECT_OFF_TEXT);
+	      bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+				    0, cs->c_naux, &main_aux);
+
+	      within_function = 1;
+
+	      new = push_context (0, fcn_start_addr + off);
+
+	      new->name = define_symbol 
+		(fcn_cs_saved.c_value + off,
+		 fcn_stab_saved.c_name, 0, 0, objfile);
+	      if (new->name != NULL)
+		SYMBOL_SECTION (new->name) = SECT_OFF_TEXT;
+	    }
+	  else if (STREQ (cs->c_name, ".ef"))
+	    {
+
+	      bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+				    0, cs->c_naux, &main_aux);
+
+	      /* The value of .ef is the address of epilogue code;
+		 not useful for gdb.  */
+	      /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
+		 contains number of lines to '}' */
+
+	      if (context_stack_depth <= 0)
+		{		/* We attempted to pop an empty context stack */
+		  complain (&ef_complaint, cs->c_symnum);
+		  within_function = 0;
+		  break;
+		}
+	      new = pop_context ();
+	      /* Stack must be empty now.  */
+	      if (context_stack_depth > 0 || new == NULL)
+		{
+		  complain (&ef_complaint, cs->c_symnum);
+		  within_function = 0;
+		  break;
+		}
+
+	      finish_block (new->name, &local_symbols, new->old_blocks,
+			    new->start_addr,
+			    (fcn_cs_saved.c_value
+			     + fcn_aux_saved.x_sym.x_misc.x_fsize
+			     + ANOFFSET (objfile->section_offsets,
+					 SECT_OFF_TEXT)),
+			    objfile);
+	      within_function = 0;
+	    }
+	  break;
+
+	case C_BSTAT:
+	  /* Begin static block.  */
+	  {
+	    struct internal_syment symbol;
+
+	    read_symbol (&symbol, cs->c_value);
+	    static_block_base = symbol.n_value;
+	    static_block_section =
+	      secnum_to_section (symbol.n_scnum, objfile);
+	  }
+	  break;
+
+	case C_ESTAT:
+	  /* End of static block.  */
+	  static_block_base = 0;
+	  static_block_section = -1;
+	  break;
+
+	case C_ARG:
+	case C_REGPARM:
+	case C_REG:
+	case C_TPDEF:
+	case C_STRTAG:
+	case C_UNTAG:
+	case C_ENTAG:
+	  {
+	    static struct complaint msg =
+	      {"Unrecognized storage class %d.", 0, 0};
+	    complain (&msg, cs->c_sclass);
+	  }
+	  break;
+
+	case C_LABEL:
+	case C_NULL:
+	  /* Ignore these.  */
+	  break;
+
+	case C_HIDEXT:
+	case C_STAT:
+	  break;
+
+	case C_BINCL:
+	  /* beginning of include file */
+	  /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted
+	     order. Thus, when wee see them, we might not know enough info
+	     to process them. Thus, we'll be saving them into a table 
+	     (inclTable) and postpone their processing. */
+
+	  record_include_begin (cs);
+	  break;
+
+	case C_EINCL:
+	  /* End of include file.  */
+	  /* See the comment after case C_BINCL.  */
+	  record_include_end (cs);
+	  break;
+
+	case C_BLOCK:
+	  if (STREQ (cs->c_name, ".bb"))
+	    {
+	      depth++;
+	      new = push_context (depth,
+				  (cs->c_value
+				   + ANOFFSET (objfile->section_offsets,
+					       SECT_OFF_TEXT)));
+	    }
+	  else if (STREQ (cs->c_name, ".eb"))
+	    {
+	      if (context_stack_depth <= 0)
+		{		/* We attempted to pop an empty context stack */
+		  complain (&eb_complaint, cs->c_symnum);
+		  break;
+		}
+	      new = pop_context ();
+	      if (depth-- != new->depth)
+		{
+		  complain (&eb_complaint, cs->c_symnum);
+		  break;
+		}
+	      if (local_symbols && context_stack_depth > 0)
+		{
+		  /* Make a block for the local symbols within.  */
+		  finish_block (new->name, &local_symbols, new->old_blocks,
+				new->start_addr,
+				(cs->c_value
+				 + ANOFFSET (objfile->section_offsets,
+					     SECT_OFF_TEXT)),
+				objfile);
+		}
+	      local_symbols = new->locals;
+	    }
+	  break;
+
+	default:
+	  process_xcoff_symbol (cs, objfile);
+	  break;
+	}
+    }
+
+  if (last_source_file)
+    {
+      struct symtab *s;
+
+      complete_symtab (filestring, file_start_addr);
+      cur_src_end_addr = file_end_addr;
+      s = end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+      /* When reading symbols for the last C_FILE of the objfile, try
+         to make sure that we set pst->symtab to the symtab for the
+         file, not to the _globals_ symtab.  I'm not sure whether this
+         actually works right or when/if it comes up.  */
+      if (pst->symtab == NULL)
+	pst->symtab = s;
+      end_stabs ();
+    }
+}
+
+#define	SYMBOL_DUP(SYMBOL1, SYMBOL2)	\
+  (SYMBOL2) = (struct symbol *)		\
+  	obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
+  *(SYMBOL2) = *(SYMBOL1);
+  
+ 
+#define	SYMNAME_ALLOC(NAME, ALLOCED)	\
+  (ALLOCED) ? (NAME) : obsavestring ((NAME), strlen (NAME), &objfile->symbol_obstack);
+
+
+static struct type *func_symbol_type;
+static struct type *var_symbol_type;
+
+/* process one xcoff symbol. */
+
+static struct symbol *
+process_xcoff_symbol (cs, objfile)
+  register struct coff_symbol *cs;
+  struct objfile *objfile;
+{
+  struct symbol onesymbol;
+  register struct symbol *sym = &onesymbol;
+  struct symbol *sym2 = NULL;
+  char *name, *pp;
+
+  int sec;
+  CORE_ADDR off;
+
+  if (cs->c_secnum < 0)
+    {
+      /* The value is a register number, offset within a frame, etc.,
+	 and does not get relocated.  */
+      off = 0;
+      sec = -1;
+    }
+  else
+    {
+      sec = secnum_to_section (cs->c_secnum, objfile);
+      off = ANOFFSET (objfile->section_offsets, sec);
+    }
+
+  name = cs->c_name;
+  if (name[0] == '.')
+    ++name;
+
+  memset (sym, '\0', sizeof (struct symbol));
+
+  /* default assumptions */
+  SYMBOL_VALUE (sym) = cs->c_value + off;
+  SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+  SYMBOL_SECTION (sym) = secnum_to_section (cs->c_secnum, objfile);
+
+  if (ISFCN (cs->c_type))
+    {
+      /* At this point, we don't know the type of the function.  This
+	 will be patched with the type from its stab entry later on in
+	 patch_block_stabs (), unless the file was compiled without -g.  */
+
+      SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
+      SYMBOL_TYPE (sym) = func_symbol_type;
+
+      SYMBOL_CLASS (sym) = LOC_BLOCK;
+      SYMBOL_DUP (sym, sym2);
+
+      if (cs->c_sclass == C_EXT)
+	add_symbol_to_list (sym2, &global_symbols);
+      else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT)
+	add_symbol_to_list (sym2, &file_symbols);
+    }
+  else
+    {
+      /* In case we can't figure out the type, provide default. */
+      SYMBOL_TYPE (sym) = var_symbol_type;
+
+      switch (cs->c_sclass)
+	{
+#if 0
+	/* The values of functions and global symbols are now resolved
+	   via the global_sym_chain in stabsread.c.  */
+	case C_FUN:
+	  if (fcn_cs_saved.c_sclass == C_EXT)
+	    add_stab_to_list (name, &global_stabs);
+	  else
+	    add_stab_to_list (name, &file_stabs);
+	  break;
+
+	case C_GSYM:
+	  add_stab_to_list (name, &global_stabs);
+	  break;
+#endif
+
+	case C_BCOMM:
+	  common_block_start (cs->c_name, objfile);
+	  break;
+
+	case C_ECOMM:
+	  common_block_end (objfile);
+	  break;
+
+	default:
+	  complain (&storclass_complaint, cs->c_sclass);
+	  /* FALLTHROUGH */
+
+	case C_DECL:
+	case C_PSYM:
+	case C_RPSYM:
+	case C_ECOML:
+	case C_LSYM:
+	case C_RSYM:
+	case C_GSYM:
+
+	  {
+	    sym = define_symbol (cs->c_value + off, cs->c_name, 0, 0, objfile);
+	    if (sym != NULL)
+	      {
+		SYMBOL_SECTION (sym) = sec;
+	      }
+	    return sym;
+	  }
+
+	case C_STSYM:
+
+	  /* For xlc (not GCC), the 'V' symbol descriptor is used for
+	     all statics and we need to distinguish file-scope versus
+	     function-scope using within_function.  We do this by
+	     changing the string we pass to define_symbol to use 'S'
+	     where we need to, which is not necessarily super-clean,
+	     but seems workable enough.  */
+
+	  if (*name == ':' || (pp = (char *) strchr(name, ':')) == NULL)
+	    return NULL;
+
+	  ++pp;
+	  if (*pp == 'V' && !within_function)
+	    *pp = 'S';
+	  sym = define_symbol ((cs->c_value
+				+ ANOFFSET (objfile->section_offsets,
+					    static_block_section)),
+			       cs->c_name, 0, 0, objfile);
+	  if (sym != NULL)
+	    {
+	      SYMBOL_VALUE (sym) += static_block_base;
+	      SYMBOL_SECTION (sym) = static_block_section;
+	    }
+	  return sym;
+
+	}
+    }
+  return sym2;
+}
+
+/* Extract the file name from the aux entry of a C_FILE symbol.
+   Result is in static storage and is only good for temporary use.  */
+
+static char *
+coff_getfilename (aux_entry, objfile)
+     union internal_auxent *aux_entry;
+     struct objfile *objfile;
+{
+  static char buffer[BUFSIZ];
+
+  if (aux_entry->x_file.x_n.x_zeroes == 0)
+    strcpy (buffer,
+	    ((struct coff_symfile_info *)objfile->sym_private)->strtbl
+	    + aux_entry->x_file.x_n.x_offset);
+  else
+    {
+      strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN);
+      buffer[FILNMLEN] = '\0';
+    }
+  return (buffer);
+}
+
+/* Set *SYMBOL to symbol number symno in symtbl.  */
+static void
+read_symbol (symbol, symno)
+     struct internal_syment *symbol;
+     int symno;
+{
+  int nsyms =
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->symtbl_num_syms;
+  char *stbl = 
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->symtbl;
+  if (symno < 0 || symno >= nsyms)
+    {
+      static struct complaint msg =
+	{"Invalid symbol offset", 0, 0};
+      complain (&msg);
+      symbol->n_value = 0;
+      symbol->n_scnum = -1;
+      return;
+    }
+  bfd_coff_swap_sym_in (this_symtab_psymtab->objfile->obfd,
+			stbl + (symno*local_symesz),
+			symbol);
+}
+  
+/* Get value corresponding to symbol number symno in symtbl.  */
+
+static int
+read_symbol_nvalue (symno)
+     int symno;
+{
+  struct internal_syment symbol[1];
+
+  read_symbol (symbol, symno);
+  return symbol->n_value;  
+}
+
+
+/* Find the address of the function corresponding to symno, where
+   symno is the symbol pointed to by the linetable.  */
+
+static int
+read_symbol_lineno (symno)
+     int symno;
+{
+  int nsyms =
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->symtbl_num_syms;
+  char *stbl = 
+    ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+      ->symtbl;
+  struct internal_syment symbol[1];
+  union internal_auxent main_aux[1];
+
+  if (symno < 0)
+    {
+      complain (&bf_notfound_complaint);
+      return 0;
+    }
+
+  /* Note that just searching for a short distance (e.g. 50 symbols)
+     is not enough, at least in the following case.
+
+     .extern foo
+     [many .stabx entries]
+     [a few functions, referring to foo]
+     .globl foo
+     .bf
+
+     What happens here is that the assembler moves the .stabx entries
+     to right before the ".bf" for foo, but the symbol for "foo" is before
+     all the stabx entries.  See PR gdb/2222.  */
+
+  /* Maintaining a table of .bf entries might be preferable to this search.
+     If I understand things correctly it would need to be done only for
+     the duration of a single psymtab to symtab conversion.  */
+  while (symno < nsyms)
+    {
+      bfd_coff_swap_sym_in (symfile_bfd,
+			    stbl + (symno * local_symesz), symbol);
+      if (symbol->n_sclass == C_FCN && STREQ (symbol->n_name, ".bf"))
+	goto gotit;
+      symno += symbol->n_numaux + 1;
+    }
+
+  complain (&bf_notfound_complaint);
+  return 0;
+
+gotit:
+  /* take aux entry and return its lineno */
+  symno++;
+  bfd_coff_swap_aux_in (this_symtab_psymtab->objfile->obfd,
+			stbl + symno * local_symesz,
+			symbol->n_type, symbol->n_sclass,
+			0, symbol->n_numaux, main_aux);
+
+  return main_aux->x_sym.x_misc.x_lnsz.x_lnno;
+}
+
+/* Support for line number handling */
+
+/* This function is called for every section; it finds the outer limits
+ * of the line table (minimum and maximum file offset) so that the
+ * mainline code can read the whole thing for efficiency.
+ */
+static void
+find_linenos (abfd, asect, vpinfo)
+     bfd *abfd;
+     sec_ptr asect;
+     PTR vpinfo; 
+{
+  struct coff_symfile_info *info;
+  int size, count;
+  file_ptr offset, maxoff;
+
+  count = asect->lineno_count;
+
+  if (!STREQ (asect->name, ".text") || count == 0)
+    return;
+
+  size = count * coff_data (abfd)->local_linesz;
+  info = (struct coff_symfile_info *)vpinfo;
+  offset = asect->line_filepos;
+  maxoff = offset + size;
+
+  if (offset < info->min_lineno_offset || info->min_lineno_offset == 0)
+    info->min_lineno_offset = offset;
+
+  if (maxoff > info->max_lineno_offset)
+    info->max_lineno_offset = maxoff;
+}
+
+static void xcoff_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+
+static void
+xcoff_psymtab_to_symtab_1 (pst)
+     struct partial_symtab *pst;
+{
+  struct cleanup *old_chain;
+  int i;
+  
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered
+	(gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	 pst->filename);
+      return;
+    }
+
+  /* Read in all partial symtabs on which this one is dependent */
+  for (i = 0; i < pst->number_of_dependencies; i++)
+    if (!pst->dependencies[i]->readin)
+      {
+	/* Inform about additional files that need to be read in.  */
+	if (info_verbose)
+	  {
+	    fputs_filtered (" ", gdb_stdout);
+	    wrap_here ("");
+	    fputs_filtered ("and ", gdb_stdout);
+	    wrap_here ("");
+	    printf_filtered ("%s...", pst->dependencies[i]->filename);
+	    wrap_here ("");		/* Flush output */
+	    gdb_flush (gdb_stdout);
+	  }
+	xcoff_psymtab_to_symtab_1 (pst->dependencies[i]);
+      }
+
+  if (((struct symloc *)pst->read_symtab_private)->numsyms != 0)
+    {
+      /* Init stuff necessary for reading in symbols.  */
+      stabsread_init ();
+      buildsym_init ();
+      old_chain = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+      read_xcoff_symtab (pst);
+      sort_symtab_syms (pst->symtab);
+
+      do_cleanups (old_chain);
+    }
+
+  pst->readin = 1;
+}
+
+static void xcoff_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+/* Read in all of the symbols for a given psymtab for real.
+   Be verbose about it if the user wants that.  */
+
+static void
+xcoff_psymtab_to_symtab (pst)
+     struct partial_symtab *pst;
+{
+  bfd *sym_bfd;
+
+  if (!pst)
+    return;
+
+  if (pst->readin)
+    {
+      fprintf_unfiltered
+	(gdb_stderr, "Psymtab for %s already read in.  Shouldn't happen.\n",
+	 pst->filename);
+      return;
+    }
+
+  if (((struct symloc *)pst->read_symtab_private)->numsyms != 0
+      || pst->number_of_dependencies)
+    {
+      /* Print the message now, before reading the string table,
+	 to avoid disconcerting pauses.  */
+      if (info_verbose)
+	{
+	  printf_filtered ("Reading in symbols for %s...", pst->filename);
+	  gdb_flush (gdb_stdout);
+	}
+
+      sym_bfd = pst->objfile->obfd;
+
+      next_symbol_text_func = xcoff_next_symbol_text;
+
+      xcoff_psymtab_to_symtab_1 (pst);
+
+      /* Match with global symbols.  This only needs to be done once,
+         after all of the symtabs and dependencies have been read in.   */
+      scan_file_globals (pst->objfile);
+
+      /* Finish up the debug error message.  */
+      if (info_verbose)
+	printf_filtered ("done.\n");
+    }
+}
+
+static void
+xcoff_new_init (objfile)
+     struct objfile *objfile;
+{
+  stabsread_new_init ();
+  buildsym_new_init ();
+}
+
+/* Do initialization in preparation for reading symbols from OBJFILE.
+ 
+   We will only be called if this is an XCOFF or XCOFF-like file.
+   BFD handles figuring out the format of the file, and code in symfile.c
+   uses BFD's determination to vector to us.  */
+
+static void
+xcoff_symfile_init (objfile)
+     struct objfile *objfile;
+{
+  /* Allocate struct to keep track of the symfile */
+  objfile -> sym_private = xmmalloc (objfile -> md,
+				     sizeof (struct coff_symfile_info));
+
+  /* XCOFF objects may be reordered, so set OBJF_REORDERED.  If we
+     find this causes a significant slowdown in gdb then we could
+     set it in the debug symbol readers only when necessary.  */
+  objfile->flags |= OBJF_REORDERED;
+
+  init_entry_point_info (objfile);
+}
+
+/* Perform any local cleanups required when we are done with a particular
+   objfile.  I.E, we are in the process of discarding all symbol information
+   for an objfile, freeing up all memory held for it, and unlinking the
+   objfile struct from the global list of known objfiles. */
+
+static void
+xcoff_symfile_finish (objfile)
+     struct objfile *objfile;
+{
+  if (objfile -> sym_private != NULL)
+    {
+      mfree (objfile -> md, objfile -> sym_private);
+    }
+
+  /* Start with a fresh include table for the next objfile.  */
+  if (inclTable)
+    {
+      free (inclTable);
+      inclTable = NULL;
+    }
+  inclIndx = inclLength = inclDepth = 0;
+}
+
+
+static void
+init_stringtab (abfd, offset, objfile)
+     bfd *abfd;
+     file_ptr offset;
+     struct objfile *objfile;
+{
+  long length;
+  int val;
+  unsigned char lengthbuf[4];
+  char *strtbl;
+
+  ((struct coff_symfile_info *)objfile->sym_private)->strtbl = NULL;
+
+  if (bfd_seek (abfd, offset, SEEK_SET) < 0)
+    error ("cannot seek to string table in %s: %s",
+	   bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
+
+  val = bfd_read ((char *)lengthbuf, 1, sizeof lengthbuf, abfd);
+  length = bfd_h_get_32 (abfd, lengthbuf);
+
+  /* If no string table is needed, then the file may end immediately
+     after the symbols.  Just return with `strtbl' set to NULL.  */
+
+  if (val != sizeof lengthbuf || length < sizeof lengthbuf)
+    return;
+
+  /* Allocate string table from symbol_obstack. We will need this table
+     as long as we have its symbol table around. */
+
+  strtbl = (char *) obstack_alloc (&objfile->symbol_obstack, length);
+  ((struct coff_symfile_info *)objfile->sym_private)->strtbl = strtbl;
+
+  /* Copy length buffer, the first byte is usually zero and is
+     used for stabs with a name length of zero.  */
+  memcpy (strtbl, lengthbuf, sizeof lengthbuf);
+  if (length == sizeof lengthbuf)
+    return;
+
+  val = bfd_read (strtbl + sizeof lengthbuf, 1, length - sizeof lengthbuf,
+		  abfd);
+
+  if (val != length - sizeof lengthbuf)
+    error ("cannot read string table from %s: %s",
+	   bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
+  if (strtbl[length - 1] != '\0')
+    error ("bad symbol file: string table does not end with null character");
+
+  return;
+}
+
+/* If we have not yet seen a function for this psymtab, this is 0.  If we
+   have seen one, it is the offset in the line numbers of the line numbers
+   for the psymtab.  */
+static unsigned int first_fun_line_offset;
+
+static struct partial_symtab *xcoff_start_psymtab
+  PARAMS ((struct objfile *, struct section_offsets *, char *, int,
+	   struct partial_symbol **, struct partial_symbol **));
+
+/* Allocate and partially fill a partial symtab.  It will be
+   completely filled at the end of the symbol list.
+
+   SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+   is the address relative to which its symbols are (incremental) or 0
+   (normal). */
+
+static struct partial_symtab *
+xcoff_start_psymtab (objfile, section_offsets,
+		     filename, first_symnum, global_syms, static_syms)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     char *filename;
+     int first_symnum;
+     struct partial_symbol **global_syms;
+     struct partial_symbol **static_syms;
+{
+  struct partial_symtab *result =
+    start_psymtab_common (objfile, section_offsets,
+			  filename,
+			  /* We fill in textlow later.  */
+			  0,
+			  global_syms, static_syms);
+
+  result->read_symtab_private = (char *)
+    obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc));
+  ((struct symloc *)result->read_symtab_private)->first_symnum = first_symnum;
+  result->read_symtab = xcoff_psymtab_to_symtab;
+
+  /* Deduce the source language from the filename for this psymtab. */
+  psymtab_language = deduce_language_from_filename (filename);
+
+  return result;
+}
+
+static struct partial_symtab *xcoff_end_psymtab
+  PARAMS ((struct partial_symtab *, char **, int, int,
+	   struct partial_symtab **, int, int));
+
+/* Close off the current usage of PST.  
+   Returns PST, or NULL if the partial symtab was empty and thrown away.
+
+   CAPPING_SYMBOL_NUMBER is the end of pst (exclusive).
+
+   INCLUDE_LIST, NUM_INCLUDES, DEPENDENCY_LIST, and NUMBER_DEPENDENCIES
+   are the information for includes and dependencies.  */
+
+static struct partial_symtab *
+xcoff_end_psymtab (pst, include_list, num_includes, capping_symbol_number,
+		   dependency_list, number_dependencies, textlow_not_set)
+     struct partial_symtab *pst;
+     char **include_list;
+     int num_includes;
+     int capping_symbol_number;
+     struct partial_symtab **dependency_list;
+     int number_dependencies;
+     int textlow_not_set;
+{
+  int i;
+  struct objfile *objfile = pst -> objfile;
+
+  if (capping_symbol_number != -1)
+    ((struct symloc *)pst->read_symtab_private)->numsyms =
+      capping_symbol_number
+	- ((struct symloc *)pst->read_symtab_private)->first_symnum;
+  ((struct symloc *)pst->read_symtab_private)->lineno_off =
+    first_fun_line_offset;
+  first_fun_line_offset = 0;
+  pst->n_global_syms =
+    objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+  pst->n_static_syms =
+    objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+  pst->number_of_dependencies = number_dependencies;
+  if (number_dependencies)
+    {
+      pst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       number_dependencies * sizeof (struct partial_symtab *));
+      memcpy (pst->dependencies, dependency_list,
+	     number_dependencies * sizeof (struct partial_symtab *));
+    }
+  else
+    pst->dependencies = 0;
+
+  for (i = 0; i < num_includes; i++)
+    {
+      struct partial_symtab *subpst =
+	allocate_psymtab (include_list[i], objfile);
+
+      subpst->section_offsets = pst->section_offsets;
+      subpst->read_symtab_private =
+	  (char *) obstack_alloc (&objfile->psymbol_obstack,
+				  sizeof (struct symloc));
+      ((struct symloc *)subpst->read_symtab_private)->first_symnum = 0;
+      ((struct symloc *)subpst->read_symtab_private)->numsyms = 0;
+      subpst->textlow = 0;
+      subpst->texthigh = 0;
+
+      /* We could save slight bits of space by only making one of these,
+	 shared by the entire set of include files.  FIXME-someday.  */
+      subpst->dependencies = (struct partial_symtab **)
+	obstack_alloc (&objfile->psymbol_obstack,
+		       sizeof (struct partial_symtab *));
+      subpst->dependencies[0] = pst;
+      subpst->number_of_dependencies = 1;
+
+      subpst->globals_offset =
+	subpst->n_global_syms =
+	  subpst->statics_offset =
+	    subpst->n_static_syms = 0;
+
+      subpst->readin = 0;
+      subpst->symtab = 0;
+      subpst->read_symtab = pst->read_symtab;
+    }
+
+  sort_pst_symbols (pst);
+
+  /* If there is already a psymtab or symtab for a file of this name,
+     remove it.  (If there is a symtab, more drastic things also
+     happen.)  This happens in VxWorks.  */
+  free_named_symtabs (pst->filename);
+
+  if (num_includes == 0
+      && number_dependencies == 0
+      && pst->n_global_syms == 0
+      && pst->n_static_syms == 0)
+    {
+      /* Throw away this psymtab, it's empty.  We can't deallocate it, since
+	 it is on the obstack, but we can forget to chain it on the list.  */
+      /* Empty psymtabs happen as a result of header files which don't have
+	 any symbols in them.  There can be a lot of them.  */
+
+      discard_psymtab (pst);
+
+      /* Indicate that psymtab was thrown away.  */
+      pst = (struct partial_symtab *)NULL;
+    }
+  return pst;
+}
+
+static void swap_sym PARAMS ((struct internal_syment *,
+			      union internal_auxent *, char **, char **,
+			      unsigned int *,
+			      struct objfile *));
+
+/* Swap raw symbol at *RAW and put the name in *NAME, the symbol in
+   *SYMBOL, the first auxent in *AUX.  Advance *RAW and *SYMNUMP over
+   the symbol and its auxents.  */
+
+static void
+swap_sym (symbol, aux, name, raw, symnump, objfile)
+     struct internal_syment *symbol;
+     union internal_auxent *aux;
+     char **name;
+     char **raw;
+     unsigned int *symnump;
+     struct objfile *objfile;
+{
+  bfd_coff_swap_sym_in (objfile->obfd, *raw, symbol);
+  if (symbol->n_zeroes)
+    {
+      /* If it's exactly E_SYMNMLEN characters long it isn't
+	 '\0'-terminated.  */
+      if (symbol->n_name[E_SYMNMLEN - 1] != '\0')
+	{
+	  /* FIXME: wastes memory for symbols which we don't end up putting
+	     into the minimal symbols.  */
+	  char *p;
+	  p = obstack_alloc (&objfile->psymbol_obstack, E_SYMNMLEN + 1);
+	  strncpy (p, symbol->n_name, E_SYMNMLEN);
+	  p[E_SYMNMLEN] = '\0';
+	  *name = p;
+	}
+      else
+	/* Point to the unswapped name as that persists as long as the
+	   objfile does.  */
+	*name = ((struct external_syment *)*raw)->e.e_name;
+    }
+  else if (symbol->n_sclass & 0x80)
+    {
+      *name = ((struct coff_symfile_info *)objfile->sym_private)->debugsec
+	+ symbol->n_offset;
+    }
+  else
+    {
+      *name = ((struct coff_symfile_info *)objfile->sym_private)->strtbl
+	+ symbol->n_offset;
+    }
+  ++*symnump;
+  *raw += coff_data (objfile->obfd)->local_symesz;
+  if (symbol->n_numaux > 0)
+    {
+      bfd_coff_swap_aux_in (objfile->obfd, *raw, symbol->n_type,
+			    symbol->n_sclass, 0, symbol->n_numaux, aux);
+
+      *symnump += symbol->n_numaux;
+      *raw += coff_data (objfile->obfd)->local_symesz * symbol->n_numaux;
+    }
+}
+
+static void
+scan_xcoff_symtab (section_offsets, objfile)
+     struct section_offsets *section_offsets;
+     struct objfile *objfile;
+{
+  CORE_ADDR toc_offset = 0;		/* toc offset value in data section. */
+  char *filestring = NULL;
+
+  char *namestring;
+  int past_first_source_file = 0;
+  bfd *abfd;
+  asection *bfd_sect;
+  unsigned int nsyms;
+
+  /* Current partial symtab */
+  struct partial_symtab *pst;
+
+  /* List of current psymtab's include files */
+  char **psymtab_include_list;
+  int includes_allocated;
+  int includes_used;
+
+  /* Index within current psymtab dependency list */
+  struct partial_symtab **dependency_list;
+  int dependencies_used, dependencies_allocated;
+
+  char *sraw_symbol;
+  struct internal_syment symbol;
+  union internal_auxent main_aux;
+  unsigned int ssymnum;
+
+  char *last_csect_name = NULL;		/* last seen csect's name and value */
+  CORE_ADDR last_csect_val = 0;
+  int last_csect_sec = 0;
+  int  misc_func_recorded = 0;		/* true if any misc. function */
+  int textlow_not_set = 1;
+
+  pst = (struct partial_symtab *) 0;
+
+  includes_allocated = 30;
+  includes_used = 0;
+  psymtab_include_list = (char **) alloca (includes_allocated *
+					   sizeof (char *));
+
+  dependencies_allocated = 30;
+  dependencies_used = 0;
+  dependency_list =
+    (struct partial_symtab **) alloca (dependencies_allocated *
+				       sizeof (struct partial_symtab *));
+
+  last_source_file = NULL;
+
+  abfd = objfile->obfd;
+
+  sraw_symbol = ((struct coff_symfile_info *)objfile->sym_private)->symtbl;
+  nsyms = ((struct coff_symfile_info *)objfile->sym_private)->symtbl_num_syms;
+  ssymnum = 0;
+  while (ssymnum < nsyms)
+    {
+      int sclass = ((struct external_syment *)sraw_symbol)->e_sclass[0] & 0xff;
+      /* This is the type we pass to partial-stab.h.  A less kludgy solution
+	 would be to break out partial-stab.h into its various parts--shuffle
+	 off the DBXREAD_ONLY stuff to dbxread.c, and make separate
+	 pstab-norm.h (for most types), pstab-sol.h (for N_SOL), etc.  */
+      int stype;
+
+      QUIT;
+
+      switch (sclass)
+	{
+	case C_EXT:
+	case C_HIDEXT:
+	  {
+	    /* The CSECT auxent--always the last auxent.  */
+	    union internal_auxent csect_aux;
+	    unsigned int symnum_before = ssymnum;
+
+	    swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+		      &ssymnum, objfile);
+	    if (symbol.n_numaux > 1)
+	      {
+		bfd_coff_swap_aux_in
+		  (objfile->obfd,
+		   sraw_symbol - coff_data(abfd)->local_symesz,
+		   symbol.n_type,
+		   symbol.n_sclass,
+		   symbol.n_numaux - 1,
+		   symbol.n_numaux,
+		   &csect_aux);
+	      }
+	    else
+	      csect_aux = main_aux;
+
+	    /* If symbol name starts with ".$" or "$", ignore it.  */
+	    if (namestring[0] == '$'
+		|| (namestring[0] == '.' && namestring[1] == '$'))
+	      break;
+
+	    switch (csect_aux.x_csect.x_smtyp & 0x7)
+	      {
+	      case XTY_SD:
+		switch (csect_aux.x_csect.x_smclas)
+		  {
+		  case XMC_PR:
+		    if (last_csect_name)
+		      {
+			/* If no misc. function recorded in the last
+			   seen csect, enter it as a function. This
+			   will take care of functions like strcmp()
+			   compiled by xlc.  */
+
+			if (!misc_func_recorded)
+			  {
+			    RECORD_MINIMAL_SYMBOL
+			      (last_csect_name, last_csect_val,
+			       mst_text, last_csect_sec,
+			       objfile);
+			  }
+
+			if (pst != NULL)
+			  {
+			    /* We have to allocate one psymtab for
+			       each program csect, because their text
+			       sections need not be adjacent.  */
+			    xcoff_end_psymtab
+			      (pst, psymtab_include_list, includes_used,
+			       symnum_before, dependency_list,
+			       dependencies_used, textlow_not_set);
+			    includes_used = 0;
+			    dependencies_used = 0;
+			    /* Give all psymtabs for this source file the same
+			       name.  */
+			    pst = xcoff_start_psymtab
+			      (objfile, section_offsets,
+			       filestring,
+			       symnum_before,
+			       objfile->global_psymbols.next,
+			       objfile->static_psymbols.next);
+			  }
+		      }
+		    if (namestring && namestring[0] == '.')
+		      {
+			last_csect_name = namestring;
+			last_csect_val = symbol.n_value;
+			last_csect_sec =
+			  secnum_to_section (symbol.n_scnum, objfile);
+		      }
+		    if (pst != NULL)
+		      {
+			CORE_ADDR highval =
+			  symbol.n_value + csect_aux.x_csect.x_scnlen.l;
+			if (highval > pst->texthigh)
+			  pst->texthigh = highval;
+			if (pst->textlow == 0 || symbol.n_value < pst->textlow)
+			  pst->textlow = symbol.n_value;
+		      }
+		    misc_func_recorded = 0;
+		    break;
+
+		  case XMC_RW:
+		    /* Data variables are recorded in the minimal symbol
+		       table, except for section symbols.  */
+		    if (*namestring != '.')
+		      prim_record_minimal_symbol_and_info
+			(namestring, symbol.n_value,
+			 sclass == C_HIDEXT ? mst_file_data : mst_data,
+			 NULL, secnum_to_section (symbol.n_scnum, objfile),
+			 NULL, objfile);
+		    break;
+
+		  case XMC_TC0:
+		    if (toc_offset)
+		      warning ("More than one XMC_TC0 symbol found.");
+		    toc_offset = symbol.n_value;
+
+		    /* Make TOC offset relative to start address of section.  */
+		    bfd_sect = secnum_to_bfd_section (symbol.n_scnum, objfile);
+		    if (bfd_sect)
+		      toc_offset -= bfd_section_vma (objfile->obfd, bfd_sect);
+		    break;
+
+		  case XMC_TC:
+		    /* These symbols tell us where the TOC entry for a
+		       variable is, not the variable itself.  */
+		    break;
+
+		  default:
+		    break;
+		  }
+		break;
+
+	      case XTY_LD:
+		switch (csect_aux.x_csect.x_smclas)
+		  {
+		  case XMC_PR:
+		    /* A function entry point.  */
+
+		    if (first_fun_line_offset == 0 && symbol.n_numaux > 1)
+		      first_fun_line_offset =
+			main_aux.x_sym.x_fcnary.x_fcn.x_lnnoptr;
+		    RECORD_MINIMAL_SYMBOL
+		      (namestring, symbol.n_value,
+		       sclass == C_HIDEXT ? mst_file_text : mst_text,
+		       secnum_to_section (symbol.n_scnum, objfile),
+		       objfile);
+		    break;
+
+		  case XMC_GL:
+		    /* shared library function trampoline code entry
+		       point. */
+
+		    /* record trampoline code entries as
+		       mst_solib_trampoline symbol.  When we lookup mst
+		       symbols, we will choose mst_text over
+		       mst_solib_trampoline. */
+		    RECORD_MINIMAL_SYMBOL
+		      (namestring, symbol.n_value,
+		       mst_solib_trampoline,
+		       secnum_to_section (symbol.n_scnum, objfile),
+		       objfile);
+		    break;
+
+		  case XMC_DS:
+		    /* The symbols often have the same names as
+		       debug symbols for functions, and confuse
+		       lookup_symbol.  */
+		    break;
+
+		  default:
+
+		    /* xlc puts each variable in a separate csect,
+		       so we get an XTY_SD for each variable.  But
+		       gcc puts several variables in a csect, so
+		       that each variable only gets an XTY_LD.  We
+		       still need to record them.  This will
+		       typically be XMC_RW; I suspect XMC_RO and
+		       XMC_BS might be possible too.  */
+		    if (*namestring != '.')
+		      prim_record_minimal_symbol_and_info
+			(namestring, symbol.n_value,
+			 sclass == C_HIDEXT ? mst_file_data : mst_data,
+			 NULL, secnum_to_section (symbol.n_scnum, objfile),
+			 NULL, objfile);
+		    break;
+		  }
+		break;
+
+	      case XTY_CM:
+		switch (csect_aux.x_csect.x_smclas)
+		  {
+		  case XMC_RW:
+		  case XMC_BS:
+		    /* Common variables are recorded in the minimal symbol
+		       table, except for section symbols.  */
+		    if (*namestring != '.')
+		      prim_record_minimal_symbol_and_info
+			(namestring, symbol.n_value,
+			 sclass == C_HIDEXT ? mst_file_bss : mst_bss,
+			 NULL, secnum_to_section (symbol.n_scnum, objfile),
+			 NULL, objfile);
+		    break;
+		  }
+		break;
+
+	      default:
+		break;
+	      }
+	  }
+	  break;
+	case C_FILE:
+	  {
+	    unsigned int symnum_before;
+
+	    symnum_before = ssymnum;
+	    swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+		      &ssymnum, objfile);
+
+	    /* See if the last csect needs to be recorded.  */
+
+	    if (last_csect_name && !misc_func_recorded)
+	      {
+
+		/* If no misc. function recorded in the last seen csect, enter
+		   it as a function.  This will take care of functions like
+		   strcmp() compiled by xlc.  */
+
+		RECORD_MINIMAL_SYMBOL
+		  (last_csect_name, last_csect_val,
+		   mst_text, last_csect_sec, objfile);
+	      }
+
+	    if (pst)
+	      {
+		xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+				   symnum_before, dependency_list,
+				   dependencies_used, textlow_not_set);
+		includes_used = 0;
+		dependencies_used = 0;
+	      }
+	    first_fun_line_offset = 0;
+
+	    /* XCOFF, according to the AIX 3.2 documentation, puts the
+	       filename in cs->c_name.  But xlc 1.3.0.2 has decided to
+	       do things the standard COFF way and put it in the auxent.
+	       We use the auxent if the symbol is ".file" and an auxent
+	       exists, otherwise use the symbol itself.  */
+	    if (!strcmp (namestring, ".file") && symbol.n_numaux > 0)
+	      {
+		filestring = coff_getfilename (&main_aux, objfile);
+	      }
+	    else
+	      filestring = namestring;
+
+	    pst = xcoff_start_psymtab (objfile, section_offsets,
+				       filestring,
+				       symnum_before,
+				       objfile->global_psymbols.next,
+				       objfile->static_psymbols.next);
+	    last_csect_name = NULL;
+	  }
+	  break;
+
+	default:
+	  {
+	    static struct complaint msg =
+	      {"Storage class %d not recognized during scan", 0, 0};
+	    complain (&msg, sclass);
+	  }
+	  /* FALLTHROUGH */
+
+	  /* C_FCN is .bf and .ef symbols.  I think it is sufficient
+	     to handle only the C_FUN and C_EXT.  */
+	case C_FCN:
+
+	case C_BSTAT:
+	case C_ESTAT:
+	case C_ARG:
+	case C_REGPARM:
+	case C_REG:
+	case C_TPDEF:
+	case C_STRTAG:
+	case C_UNTAG:
+	case C_ENTAG:
+	case C_LABEL:
+	case C_NULL:
+
+	  /* C_EINCL means we are switching back to the main file.  But there
+	     is no reason to care; the only thing we want to know about
+	     includes is the names of all the included (.h) files.  */
+	case C_EINCL:
+
+	case C_BLOCK:
+
+	  /* I don't think C_STAT is used in xcoff; C_HIDEXT appears to be
+	     used instead.  */
+	case C_STAT:
+
+	  /* I don't think the name of the common block (as opposed to the
+	     variables within it) is something which is user visible
+	     currently.  */
+	case C_BCOMM:
+	case C_ECOMM:
+
+	case C_PSYM:
+	case C_RPSYM:
+
+	  /* I think we can ignore C_LSYM; types on xcoff seem to use C_DECL
+	     so C_LSYM would appear to be only for locals.  */
+	case C_LSYM:
+
+	case C_AUTO:
+	case C_RSYM:
+	  {
+	    /* We probably could save a few instructions by assuming that
+	       C_LSYM, C_PSYM, etc., never have auxents.  */
+	    int naux1 =
+	      ((struct external_syment *)sraw_symbol)->e_numaux[0] + 1;
+	    ssymnum += naux1;
+	    sraw_symbol += sizeof (struct external_syment) * naux1;
+	  }
+	  break;
+
+	case C_BINCL:
+	  stype = N_SOL;
+	  goto pstab;
+
+	case C_FUN:
+	  /* The value of the C_FUN is not the address of the function (it
+	     appears to be the address before linking), but as long as it
+	     is smaller than the actual address, then find_pc_partial_function
+	     will use the minimal symbols instead.  I hope.  */
+
+	case C_GSYM:
+	case C_ECOML:
+	case C_DECL:
+	case C_STSYM:
+	  stype = N_LSYM;
+	pstab:;
+	  swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+		    &ssymnum, objfile);
+#define CUR_SYMBOL_TYPE stype
+#define CUR_SYMBOL_VALUE symbol.n_value
+
+/* START_PSYMTAB and END_PSYMTAB are never used, because they are only
+   called from DBXREAD_ONLY or N_SO code.  Likewise for the symnum
+   variable.  */
+#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms) 0
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)\
+  do {} while (0)
+/* We have already set the namestring.  */
+#define SET_NAMESTRING() /* */
+
+#include "partial-stab.h"
+	}
+    }
+
+  if (pst)
+    {
+      xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+			 ssymnum, dependency_list,
+			 dependencies_used, textlow_not_set);
+    }
+
+  /* Record the toc offset value of this symbol table into objfile structure.
+     If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
+     this information would be file auxiliary header. */
+
+  ((struct coff_symfile_info *) objfile->sym_private)->toc_offset = toc_offset;
+}
+
+/* Return the toc offset value for a given objfile.  */
+
+CORE_ADDR
+get_toc_offset (objfile)
+     struct objfile *objfile;
+{
+  if (objfile)
+    return ((struct coff_symfile_info *) objfile->sym_private)->toc_offset;
+  return 0;
+}
+
+/* Scan and build partial symbols for a symbol file.
+   We have been initialized by a call to dbx_symfile_init, which 
+   put all the relevant info into a "struct dbx_symfile_info",
+   hung off the objfile structure.
+
+   SECTION_OFFSETS contains offsets relative to which the symbols in the
+   various sections are (depending where the sections were actually loaded).
+   MAINLINE is true if we are reading the main symbol
+   table (as opposed to a shared lib or dynamically loaded file).  */
+
+static void
+xcoff_initial_scan (objfile, section_offsets, mainline)
+     struct objfile *objfile;
+     struct section_offsets *section_offsets;
+     int mainline;	/* FIXME comments above */
+{
+  bfd *abfd;
+  int val;
+  struct cleanup *back_to;
+  int num_symbols;			/* # of symbols */
+  file_ptr symtab_offset;		/* symbol table and */
+  file_ptr stringtab_offset;		/* string table file offsets */
+  struct coff_symfile_info *info;
+  char *name;
+  unsigned int size;
+
+  info = (struct coff_symfile_info *) objfile -> sym_private;
+  symfile_bfd = abfd = objfile->obfd;
+  name = objfile->name;
+
+  num_symbols = bfd_get_symcount (abfd);	/* # of symbols */
+  symtab_offset = obj_sym_filepos (abfd);	/* symbol table file offset */
+  stringtab_offset = symtab_offset +
+    num_symbols * coff_data(abfd)->local_symesz;
+
+  info->min_lineno_offset = 0;
+  info->max_lineno_offset = 0;
+  bfd_map_over_sections (abfd, find_linenos, info);
+
+  if (num_symbols > 0)
+    {
+      /* Read the string table.  */
+      init_stringtab (abfd, stringtab_offset, objfile);
+
+      /* Read the .debug section, if present.  */
+      {
+	sec_ptr secp;
+	bfd_size_type length;
+	char *debugsec = NULL;
+
+	secp = bfd_get_section_by_name (abfd, ".debug");
+	if (secp)
+	  {
+	    length = bfd_section_size (abfd, secp);
+	    if (length)
+	      {
+		debugsec =
+		  (char *) obstack_alloc (&objfile->symbol_obstack, length);
+
+		if (!bfd_get_section_contents (abfd, secp, debugsec,
+					       (file_ptr) 0, length))
+		  {
+		    error ("Error reading .debug section of `%s': %s",
+			   name, bfd_errmsg (bfd_get_error ()));
+		  }
+	      }
+	  }
+	((struct coff_symfile_info *)objfile->sym_private)->debugsec =
+	  debugsec;
+      }
+    }
+
+  /* Read the symbols.  We keep them in core because we will want to
+     access them randomly in read_symbol*.  */
+  val = bfd_seek (abfd, symtab_offset, SEEK_SET);
+  if (val < 0)
+    error ("Error reading symbols from %s: %s",
+	   name, bfd_errmsg (bfd_get_error ()));
+  size = coff_data (abfd)->local_symesz * num_symbols;
+  ((struct coff_symfile_info *)objfile->sym_private)->symtbl =
+    obstack_alloc (&objfile->symbol_obstack, size);
+  ((struct coff_symfile_info *)objfile->sym_private)->symtbl_num_syms =
+    num_symbols;
+
+  val = bfd_read (((struct coff_symfile_info *)objfile->sym_private)->symtbl,
+		  size, 1, abfd);
+  if (val != size)
+    perror_with_name ("reading symbol table");
+
+  /* If we are reinitializing, or if we have never loaded syms yet, init */
+  if (mainline
+      || objfile->global_psymbols.size == 0
+      || objfile->static_psymbols.size == 0)
+    /* I'm not sure how how good num_symbols is; the rule of thumb in
+       init_psymbol_list was developed for a.out.  On the one hand,
+       num_symbols includes auxents.  On the other hand, it doesn't
+       include N_SLINE.  */
+    init_psymbol_list (objfile, num_symbols);
+
+  free_pending_blocks ();
+  back_to = make_cleanup ((make_cleanup_func) really_free_pendings, 0);
+
+  init_minimal_symbol_collection ();
+  make_cleanup ((make_cleanup_func) discard_minimal_symbols, 0);
+
+  /* Now that the symbol table data of the executable file are all in core,
+     process them and define symbols accordingly.  */
+
+  scan_xcoff_symtab (section_offsets, objfile);
+
+  /* Install any minimal symbols that have been collected as the current
+     minimal symbols for this objfile. */
+
+  install_minimal_symbols (objfile);
+
+  do_cleanups (back_to);
+}
+
+static struct section_offsets *
+xcoff_symfile_offsets (objfile, addr)
+     struct objfile *objfile;
+     CORE_ADDR addr;
+{
+  struct section_offsets *section_offsets;
+  int i;
+
+  objfile->num_sections = SECT_OFF_MAX;
+  section_offsets = (struct section_offsets *)
+    obstack_alloc
+      (&objfile -> psymbol_obstack,
+       sizeof (struct section_offsets)
+       + sizeof (section_offsets->offsets) * objfile->num_sections);
+
+  /* syms_from_objfile kindly subtracts from addr the bfd_section_vma
+     of the .text section.  This strikes me as wrong--whether the
+     offset to be applied to symbol reading is relative to the start
+     address of the section depends on the symbol format.  In any
+     event, this whole "addr" concept is pretty broken (it doesn't
+     handle any section but .text sensibly), so just ignore the addr
+     parameter and use 0.  rs6000-nat.c will set the correct section
+     offsets via objfile_relocate.  */
+  for (i = 0; i < objfile->num_sections; ++i)
+    ANOFFSET (section_offsets, i) = 0;
+
+  return section_offsets;
+}
+
+/* Register our ability to parse symbols for xcoff BFD files.  */
+
+static struct sym_fns xcoff_sym_fns =
+{
+
+  /* Because the bfd uses coff_flavour, we need to specially kludge
+     the flavour.  It is possible that coff and xcoff should be merged as
+     they do have fundamental similarities (for example, the extra storage
+     classes used for stabs could presumably be recognized in any COFF file).
+     However, in addition to obvious things like all the csect hair, there are
+     some subtler differences between xcoffread.c and coffread.c, notably
+     the fact that coffread.c has no need to read in all the symbols, but
+     xcoffread.c reads all the symbols and does in fact randomly access them
+     (in C_BSTAT and line number processing).  */
+
+  (enum bfd_flavour)-1,
+
+  xcoff_new_init,	/* sym_new_init: init anything gbl to entire symtab */
+  xcoff_symfile_init,	/* sym_init: read initial info, setup for sym_read() */
+  xcoff_initial_scan,	/* sym_read: read a symbol file into symtab */
+  xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */
+  xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */
+  NULL			/* next: pointer to next struct sym_fns */
+};
+
+void
+_initialize_xcoffread ()
+{
+  add_symtab_fns(&xcoff_sym_fns);
+
+  func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
+				"<function, no debug info>", NULL);
+  TYPE_TARGET_TYPE (func_symbol_type) = builtin_type_int;
+  var_symbol_type =
+    init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+	       "<variable, no debug info>", NULL);
+}
diff --git a/gdb/xcoffsolib.c b/gdb/xcoffsolib.c
new file mode 100644
index 0000000..13d8065
--- /dev/null
+++ b/gdb/xcoffsolib.c
@@ -0,0 +1,220 @@
+/* Shared library support for RS/6000 (xcoff) object files, for GDB.
+   Copyright 1991, 1992 Free Software Foundation.
+   Contributed by IBM Corporation.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#if 0
+#include <sys/types.h>
+#include <sys/ldr.h>
+#endif
+
+#include "defs.h"
+#include "bfd.h"
+#include "xcoffsolib.h"
+#include "inferior.h"
+#include "command.h"
+
+/* Hook to relocate symbols at runtime.  If gdb is build natively, this
+   hook is initialized in by rs6000-nat.c.  If not, it is currently left
+   NULL and never called. */
+
+void (*xcoff_relocate_symtab_hook) PARAMS ((unsigned int)) = NULL;
+
+#ifdef SOLIB_SYMBOLS_MANUAL
+
+extern struct symtab *current_source_symtab;
+extern int	      current_source_line;
+
+/* The real work of adding a shared library file to the symtab and
+   the section list.  */
+
+void
+solib_add (arg_string, from_tty, target)
+     char *arg_string;
+     int from_tty;
+     struct target_ops *target;
+{	
+  char *val;
+  struct vmap *vp = vmap;
+  struct objfile *obj;
+  struct symtab *saved_symtab;
+  int saved_line;
+
+  int loaded = 0;			/* true if any shared obj loaded */
+  int matched = 0;			/* true if any shared obj matched */
+
+  if (arg_string == 0)
+      re_comp (".");
+  else if (val = (char *) re_comp (arg_string)) {
+      error ("Invalid regexp: %s", val);
+  }
+  if (!vp || !vp->nxt)
+    return;
+
+  /* save current symbol table and line number, in case they get changed
+     in symbol loading process. */
+ 
+  saved_symtab = current_source_symtab;
+  saved_line = current_source_line;
+
+  /* skip over the first vmap, it is the main program, always loaded. */
+  vp = vp->nxt;
+
+  for (; vp; vp = vp->nxt) {
+
+    if (re_exec (vp->name) || (*vp->member && re_exec (vp->member))) {
+
+      matched = 1;
+
+      /* if already loaded, continue with the next one. */
+      if (vp->loaded) {
+	
+	printf_unfiltered ("%s%s%s%s: already loaded.\n",
+	  *vp->member ? "(" : "",
+	  vp->member,
+	  *vp->member ? ") " : "",
+	  vp->name);
+	continue;
+      }
+
+      printf_unfiltered ("Loading  %s%s%s%s...",
+	  *vp->member ? "(" : "",
+	  vp->member,
+	  *vp->member ? ") " : "",
+	  vp->name);
+      gdb_flush (gdb_stdout);
+
+      /* This is gross and doesn't work.  If this code is re-enabled,
+	 just stick a objfile member into the struct vmap; that's the
+	 way solib.c (for SunOS/SVR4) does it.  */
+	obj = lookup_objfile_bfd (vp->bfd);
+	if (!obj) {
+	  warning ("\nObj structure for the shared object not found. Loading failed.");
+	  continue;
+	}
+
+	syms_from_objfile (obj, 0, 0, 0);
+	new_symfile_objfile (obj, 0, 0);
+	vmap_symtab (vp, 0, 0);
+	printf_unfiltered ("Done.\n");
+	loaded = vp->loaded = 1;
+    }
+  }
+  /* if any shared object is loaded, then misc_func_vector needs sorting. */
+  if (loaded) {
+#if 0
+    sort_misc_function_vector ();
+#endif
+    current_source_symtab = saved_symtab;
+    current_source_line = saved_line;
+
+    /* Getting new symbols might change our opinion about what is frameless.
+       Is this correct?? FIXME. */
+/*    reinit_frame_cache(); */
+  }
+  else if (!matched)
+    printf_unfiltered ("No matching shared object found.\n");
+}
+#endif /* SOLIB_SYMBOLS_MANUAL */
+
+/* Return the module name of a given text address. Note that returned buffer
+   is not persistent. */
+
+char *
+pc_load_segment_name (addr)
+CORE_ADDR addr;
+{
+   static char buffer [BUFSIZ];
+   struct vmap *vp = vmap;
+
+   buffer [0] = buffer [1] = '\0';
+   for (; vp; vp = vp->nxt)
+     if (vp->tstart <= addr && addr < vp->tend) {
+	if (*vp->member) {
+	  buffer [0] = '(';
+	  strcat (&buffer[1], vp->member);
+	  strcat (buffer, ")");
+	}
+	strcat (buffer, vp->name);
+	return buffer;
+     }
+   return "(unknown load module)";
+}
+
+static void solib_info PARAMS ((char *, int));
+
+static void
+solib_info (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  struct vmap *vp = vmap;
+
+  /* Check for new shared libraries loaded with load ().  */
+  if (xcoff_relocate_symtab_hook != NULL)
+    (*xcoff_relocate_symtab_hook) (inferior_pid);
+
+  if (vp == NULL || vp->nxt == NULL)
+    {
+      printf_unfiltered ("No shared libraries loaded at this time.\n");	
+      return;
+    }
+
+  /* Skip over the first vmap, it is the main program, always loaded.  */
+  vp = vp->nxt;
+
+  printf_unfiltered ("\
+Text Range		Data Range		Syms	Shared Object Library\n");
+
+  for (; vp != NULL; vp = vp->nxt)
+    {
+      printf_unfiltered ("0x%08x-0x%08x	0x%08x-0x%08x	%s	%s%s%s%s\n",
+			 vp->tstart, vp->tend,
+			 vp->dstart, vp->dend,
+			 vp->loaded ? "Yes" : "No ",
+			 *vp->member ? "(" : "",
+			 vp->member,
+			 *vp->member ? ") " : "",
+			 vp->name);
+    }
+}
+
+void
+sharedlibrary_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  dont_repeat ();
+
+  /* Check for new shared libraries loaded with load ().  */
+  if (xcoff_relocate_symtab_hook != NULL)
+    (*xcoff_relocate_symtab_hook) (inferior_pid);
+
+#ifdef SOLIB_SYMBOLS_MANUAL
+  solib_add (args, from_tty, (struct target_ops *)0);
+#endif /* SOLIB_SYMBOLS_MANUAL */
+}
+
+void
+_initialize_solib()
+{
+  add_com ("sharedlibrary", class_files, sharedlibrary_command,
+	   "Load shared object library symbols for files matching REGEXP.");
+  add_info ("sharedlibrary", solib_info, 
+	    "Status of loaded shared object libraries");
+}
diff --git a/gdb/xcoffsolib.h b/gdb/xcoffsolib.h
new file mode 100644
index 0000000..77d691b
--- /dev/null
+++ b/gdb/xcoffsolib.h
@@ -0,0 +1,58 @@
+/* Data structures for RS/6000 shared libraries, for GDB.
+   Copyright 1991, 1992, 1994, 1997 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* The vmap struct is used to describe the virtual address space of
+   the target we are manipulating.  The first entry is always the "exec"
+   file.  Subsequent entries correspond to other objects that are
+   mapped into the address space of a process created from the "exec" file.
+   These are either in response to exec()ing the file, in which case all
+   shared libraries are loaded, or a "load" system call, followed by the
+   user's issuance of a "load" command.  */
+
+struct vmap {
+  struct vmap *nxt;	/* ptr to next in chain			*/
+  bfd *bfd;		/* BFD for mappable object library	*/
+  char *name;		/* ptr to object file name		*/
+  char *member;		/* ptr to member name			*/
+  CORE_ADDR tstart;	/* virtual addr where member is mapped	*/
+  CORE_ADDR tend;	/* virtual upper bound of member	*/
+  CORE_ADDR tvma;	/* virtual addr of text section in object file */
+  CORE_ADDR toffs;	/* offset of text section in object file */
+  CORE_ADDR dstart;	/* virtual address of data start	*/
+  CORE_ADDR dend;	/* virtual address of data end		*/
+  CORE_ADDR dvma;	/* virtual addr of data section in object file */
+
+  /* This is NULL for the exec-file.  */
+  struct objfile *objfile;
+  
+  unsigned  loaded:1;	/* True if symbols are loaded		*/
+  unsigned  padding:15;
+};
+
+
+struct vmap_and_bfd {
+  bfd *pbfd;
+  struct vmap *pvmap;
+};
+
+extern struct vmap *vmap;
+
+/* Hook for symbol table relocation at runtime. */
+
+extern void (*xcoff_relocate_symtab_hook) PARAMS ((unsigned int));
diff --git a/gdb/xmodem.c b/gdb/xmodem.c
new file mode 100644
index 0000000..dd13b87
--- /dev/null
+++ b/gdb/xmodem.c
@@ -0,0 +1,284 @@
+/* XMODEM support for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "serial.h"
+#include "target.h"
+#include "xmodem.h"
+
+/* These definitions are for xmodem protocol. */
+
+#define SOH	0x01
+#define STX	0x02
+#define ACK	0x06
+#define NAK	0x15
+#define EOT	0x04
+#define CANCEL	0x18
+
+static int blknum;		/* XMODEM block number */
+static int crcflag;		/* Sez we are using CRC's instead of cksums */
+
+static int
+readchar (desc, timeout)
+     serial_t desc;
+     int timeout;
+{
+  int c;
+
+  c = SERIAL_READCHAR (desc, timeout);
+
+  if (remote_debug > 0)
+    fputc_unfiltered (c, gdb_stderr);
+
+  if (c >= 0)
+    return c;
+
+  if (c == SERIAL_TIMEOUT)
+    error ("Timeout reading from remote system.");
+
+  perror_with_name ("xmodem.c:readchar()");
+}
+
+#define CRC16 0x1021		/* Generator polynomial (X^16 + X^12 + X^5 + 1) */
+
+static unsigned short *crctab;
+
+/* Call this to init the fast CRC-16 calculation table.  */
+
+static void
+crcinit ()
+{
+  static int crctab_inited = 0;
+  int val;
+
+  if (crctab_inited == 1)
+    return;
+
+  crctab = xmalloc (256 * sizeof (short));
+
+  for (val = 0; val <= 255; val++)
+    {
+      int i;
+      unsigned int crc;
+
+      crc = val << 8;
+
+      for (i = 0; i < 8; ++i)
+	{
+	  crc <<= 1;
+
+	  if (crc & 0x10000)
+	    crc ^= CRC16;
+	}
+
+      crctab [val] = crc;
+    }
+
+  crctab_inited = 1;
+}
+
+/* Calculate a CRC-16 for the LEN byte message pointed at by P.  */
+
+static unsigned short
+docrc (p, len)
+     unsigned char *p;
+     int len;
+{
+  unsigned short crc = 0;
+
+  while (len-- > 0)
+    crc = (crc << 8) ^ crctab [(crc >> 8) ^ *p++];
+
+  return crc;
+}
+
+/* Start up the transmit process.  Reset state variables.  Wait for receiver to
+   send NAK or CRC request.  */
+
+int
+xmodem_init_xfer (desc)
+     serial_t desc;
+{
+  int c;
+  int i;
+
+  blknum = 1;
+  crcflag = 0;
+  crcinit ();
+
+  for (i = 1; i <= 10; i++)
+    {
+      c = readchar (desc, 6);
+
+      switch (c)
+	{
+	case 'C':
+	  crcflag = 1;
+	case NAK:
+	  return 0;
+	default:
+	  fprintf_unfiltered (gdb_stderr, "xmodem_init_xfer: Got unexpected character %c (0%o)\n", c, c);
+	  continue;
+	case CANCEL:		/* target aborted load */
+	  fprintf_unfiltered (gdb_stderr, "Got a CANCEL from the target.\n");
+	  continue;
+	}
+    }
+  error ("xmodem_init_xfer:  Too many unexpected characters.");
+}
+
+/* Take 128 bytes of data and make a packet out of it.
+ *
+ *	Each packet looks like this:
+ *	+-----+-------+-------+------+-----+
+ *	| SOH | Seq1. | Seq2. | data | SUM |
+ *	+-----+-------+-------+------+-----+
+ *	SOH  = 0x01
+ *	Seq1 = The sequence number.
+ *	Seq2 = The complement of the sequence number.
+ *	Data = A 128 bytes of data.
+ *	SUM  = Add the contents of the 128 bytes and use the low-order
+ *	       8 bits of the result.
+ *
+ * send_xmodem_packet fills in the XMODEM fields of PACKET and sends it to the
+ * remote system.  PACKET must be XMODEM_PACKETSIZE bytes long.  The data must
+ * start 3 bytes after the beginning of the packet to leave room for the
+ * XMODEM header.  LEN is the length of the data portion of the packet (and
+ * must be <= 128 bytes).  If it is < 128 bytes, ^Z padding will be added.
+ */
+
+void
+xmodem_send_packet (desc, packet, len, hashmark)
+     serial_t desc;
+     unsigned char *packet;
+     int len;
+     int hashmark;
+{
+  int i;
+  int retries;
+  int pktlen;
+  int datasize;
+  
+  /* build the packet header */
+
+  packet[1] = blknum;
+  packet[2] = ~blknum;
+
+  blknum++;
+  
+  if (len <= XMODEM_DATASIZE)
+    {
+      packet[0] = SOH;
+      datasize = XMODEM_DATASIZE;
+    }
+  else if (len <= XMODEM_1KDATASIZE)
+    {
+      packet[0] = STX;
+      datasize = XMODEM_1KDATASIZE;
+    }
+  else
+    abort ();			/* Packet way too large */
+
+  /* Add ^Z padding if packet < 128 (or 1024) bytes */
+
+  memset (packet + 3 + len, '\026', datasize - len);
+
+  if (crcflag)
+    {
+      int crc;
+
+      crc = docrc (packet + 3, datasize);
+
+      packet[3 + datasize] = crc >> 8;
+      packet[3 + datasize + 1] = crc;
+      pktlen = datasize + 5;
+    }
+  else
+    {
+      int sum;
+
+      sum = 0;
+      for (i = 3; i < datasize + 3; i++)
+	sum += packet[i];
+
+      packet[3 + datasize] = sum; /* add the checksum */
+      pktlen = datasize + 4;
+    }
+
+  for (retries = 3; retries >= 0; retries--)
+    {
+      int c;
+
+      SERIAL_WRITE (desc, packet, pktlen);
+
+      c = readchar (desc, 3);
+      switch (c)
+	{
+	case ACK:
+	  return;
+	case NAK:
+	  if (!hashmark)
+	    continue;
+	  putchar_unfiltered ('-');
+	  gdb_flush (gdb_stdout);
+	  continue;
+	case CANCEL:
+	  error ("xmodem_send_packet: Transfer aborted by receiver.");
+	default:
+	  fprintf_unfiltered (gdb_stderr, "xmodem_send_packet: Got unexpected character %c (0%o)\n", c, c);
+	  continue;
+	}
+    }
+
+  SERIAL_WRITE (desc, "\004", 1); /* Send an EOT */
+
+  error ("xmodem_send_packet:  Excessive retries.");
+}
+
+/* Finish off the transfer.  Send out the EOT, and wait for an ACK.  */
+
+void
+xmodem_finish_xfer (desc)
+     serial_t desc;
+{
+  int retries;
+
+  for (retries = 10; retries >= 0; retries--)
+    {
+      int c;
+
+      SERIAL_WRITE (desc, "\004", 1); /* Send an EOT */
+
+      c = readchar (desc, 3);
+      switch (c)
+	{
+	case ACK:
+	  return;
+	case NAK:
+	  continue;
+	case CANCEL:
+	  error ("xmodem_finish_xfer: Transfer aborted by receiver.");
+	default:
+	  fprintf_unfiltered (gdb_stderr, "xmodem_send_packet: Got unexpected character %c (0%o)\n", c, c);
+	  continue;
+	}
+    }
+
+  error ("xmodem_finish_xfer:  Excessive retries.");
+}
diff --git a/gdb/xmodem.h b/gdb/xmodem.h
new file mode 100644
index 0000000..0303612
--- /dev/null
+++ b/gdb/xmodem.h
@@ -0,0 +1,29 @@
+/* XMODEM support for GDB, the GNU debugger.
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+int xmodem_init_xfer PARAMS ((serial_t desc));
+void send_xmodem_packet PARAMS ((serial_t desc, unsigned char *packet, int len,
+				 int hashmark));
+void xmodem_finish_xfer PARAMS ((serial_t desc));
+
+#define XMODEM_DATASIZE	128	/* The data size is ALWAYS 128 */
+#define XMODEM_1KDATASIZE 1024	/* Unless it's 1024!!! */
+#define XMODEM_PACKETSIZE 133	/* data + packet headers and crc */
+#define XMODEM_1KPACKETSIZE 1024 + 5 /* data + packet headers and crc */
+#define XMODEM_DATAOFFSET 3	/* Offset to start of actual data */
diff --git a/gdb/z8k-tdep.c b/gdb/z8k-tdep.c
new file mode 100644
index 0000000..0b5c1c2
--- /dev/null
+++ b/gdb/z8k-tdep.c
@@ -0,0 +1,453 @@
+/* Target-machine dependent code for Zilog Z8000, for GDB.
+   Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*
+ Contributed by Steve Chamberlain
+                sac@cygnus.com
+ */
+
+#include "defs.h"
+#include "frame.h"
+#include "obstack.h"
+#include "symtab.h"
+#include "gdbcmd.h"
+#include "gdbtypes.h"
+#include "dis-asm.h"
+#include "gdbcore.h"
+
+
+/* Return the saved PC from this frame.
+
+   If the frame has a memory copy of SRP_REGNUM, use that.  If not,
+   just use the register SRP_REGNUM itself.  */
+
+CORE_ADDR
+frame_saved_pc (frame)
+     struct frame_info *frame;
+{
+  return read_memory_pointer (frame->frame + (BIG ? 4 : 2));
+}
+
+#define IS_PUSHL(x) (BIG ? ((x & 0xfff0) == 0x91e0):((x & 0xfff0) == 0x91F0))
+#define IS_PUSHW(x) (BIG ? ((x & 0xfff0) == 0x93e0):((x & 0xfff0)==0x93f0))
+#define IS_MOVE_FP(x) (BIG ? x == 0xa1ea : x == 0xa1fa)
+#define IS_MOV_SP_FP(x) (BIG ? x == 0x94ea : x == 0x0d76)
+#define IS_SUB2_SP(x) (x==0x1b87)
+#define IS_MOVK_R5(x) (x==0x7905)
+#define IS_SUB_SP(x) ((x & 0xffff) == 0x020f)
+#define IS_PUSH_FP(x) (BIG ? (x == 0x93ea) : (x == 0x93fa))
+
+/* work out how much local space is on the stack and
+   return the pc pointing to the first push */
+
+static CORE_ADDR
+skip_adjust (pc, size)
+     CORE_ADDR pc;
+     int *size;
+{
+  *size = 0;
+
+  if (IS_PUSH_FP (read_memory_short (pc))
+      && IS_MOV_SP_FP (read_memory_short (pc + 2)))
+    {
+      /* This is a function with an explict frame pointer */
+      pc += 4;
+      *size += 2;		/* remember the frame pointer */
+    }
+
+  /* remember any stack adjustment */
+  if (IS_SUB_SP (read_memory_short (pc)))
+    {
+      *size += read_memory_short (pc + 2);
+      pc += 4;
+    }
+  return pc;
+}
+
+static CORE_ADDR examine_frame PARAMS ((CORE_ADDR, CORE_ADDR *regs, CORE_ADDR));
+static CORE_ADDR
+examine_frame (pc, regs, sp)
+     CORE_ADDR pc;
+     CORE_ADDR *regs;
+     CORE_ADDR sp;
+{
+  int w = read_memory_short (pc);
+  int offset = 0;
+  int regno;
+
+  for (regno = 0; regno < NUM_REGS; regno++)
+    regs[regno] = 0;
+
+  while (IS_PUSHW (w) || IS_PUSHL (w))
+    {
+      /* work out which register is being pushed to where */
+      if (IS_PUSHL (w))
+	{
+	  regs[w & 0xf] = offset;
+	  regs[(w & 0xf) + 1] = offset + 2;
+	  offset += 4;
+	}
+      else
+	{
+	  regs[w & 0xf] = offset;
+	  offset += 2;
+	}
+      pc += 2;
+      w = read_memory_short (pc);
+    }
+
+  if (IS_MOVE_FP (w))
+    {
+      /* We know the fp */
+
+    }
+  else if (IS_SUB_SP (w))
+    {
+      /* Subtracting a value from the sp, so were in a function
+       which needs stack space for locals, but has no fp.  We fake up
+       the values as if we had an fp */
+      regs[FP_REGNUM] = sp;
+    }
+  else
+    {
+      /* This one didn't have an fp, we'll fake it up */
+      regs[SP_REGNUM] = sp;
+    }
+  /* stack pointer contains address of next frame */
+  /*  regs[fp_regnum()] = fp;*/
+  regs[SP_REGNUM] = sp;
+  return pc;
+}
+
+CORE_ADDR
+z8k_skip_prologue (start_pc)
+     CORE_ADDR start_pc;
+{
+  CORE_ADDR dummy[NUM_REGS];
+
+  return examine_frame (start_pc, dummy, 0);
+}
+
+CORE_ADDR
+z8k_addr_bits_remove (addr)
+     CORE_ADDR addr;
+{
+  return (addr & PTR_MASK);
+}
+
+int
+read_memory_pointer (x)
+     CORE_ADDR x;
+{
+  return read_memory_integer (ADDR_BITS_REMOVE (x), BIG ? 4 : 2);
+}
+
+CORE_ADDR
+frame_chain (thisframe)
+     struct frame_info *thisframe;
+{
+  if (thisframe->prev == 0)
+    {
+      /* This is the top of the stack, let's get the sp for real */
+    }
+  if (!inside_entry_file (thisframe->pc))
+    {
+      return read_memory_pointer (thisframe->frame);
+    }
+  return 0;
+}
+
+void
+init_frame_pc ()
+{
+  abort ();
+}
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+void
+z8k_frame_init_saved_regs (frame_info)
+     struct frame_info *frame_info;
+{
+  CORE_ADDR pc;
+  int w;
+
+  frame_saved_regs_zalloc (frame_info);
+  pc = get_pc_function_start (frame_info->pc);
+
+  /* wander down the instruction stream */
+  examine_frame (pc, frame_info->saved_regs, frame_info->frame);
+
+}
+
+void
+z8k_push_dummy_frame ()
+{
+  abort ();
+}
+
+int
+gdb_print_insn_z8k (memaddr, info)
+     bfd_vma memaddr;
+     disassemble_info *info;
+{
+  if (BIG)
+    return print_insn_z8001 (memaddr, info);
+  else
+    return print_insn_z8002 (memaddr, info);
+}
+
+/* Fetch the instruction at ADDR, returning 0 if ADDR is beyond LIM or
+   is not the address of a valid instruction, the address of the next
+   instruction beyond ADDR otherwise.  *PWORD1 receives the first word
+   of the instruction.*/
+
+CORE_ADDR
+NEXT_PROLOGUE_INSN (addr, lim, pword1)
+     CORE_ADDR addr;
+     CORE_ADDR lim;
+     short *pword1;
+{
+  char buf[2];
+  if (addr < lim + 8)
+    {
+      read_memory (addr, buf, 2);
+      *pword1 = extract_signed_integer (buf, 2);
+
+      return addr + 2;
+    }
+  return 0;
+}
+
+#if 0
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.
+
+   We cache the result of doing this in the frame_cache_obstack, since
+   it is fairly expensive.  */
+
+void
+frame_find_saved_regs (fip, fsrp)
+     struct frame_info *fip;
+     struct frame_saved_regs *fsrp;
+{
+  int locals;
+  CORE_ADDR pc;
+  CORE_ADDR adr;
+  int i;
+
+  memset (fsrp, 0, sizeof *fsrp);
+
+  pc = skip_adjust (get_pc_function_start (fip->pc), &locals);
+
+  {
+    adr = FRAME_FP (fip) - locals;
+    for (i = 0; i < 8; i++)
+      {
+	int word = read_memory_short (pc);
+
+	pc += 2;
+	if (IS_PUSHL (word))
+	  {
+	    fsrp->regs[word & 0xf] = adr;
+	    fsrp->regs[(word & 0xf) + 1] = adr - 2;
+	    adr -= 4;
+	  }
+	else if (IS_PUSHW (word))
+	  {
+	    fsrp->regs[word & 0xf] = adr;
+	    adr -= 2;
+	  }
+	else
+	  break;
+      }
+
+  }
+
+  fsrp->regs[PC_REGNUM] = fip->frame + 4;
+  fsrp->regs[FP_REGNUM] = fip->frame;
+
+}
+#endif
+
+int
+saved_pc_after_call ()
+{
+  return ADDR_BITS_REMOVE 
+    (read_memory_integer (read_register (SP_REGNUM), PTR_SIZE));
+}
+
+
+void
+extract_return_value (type, regbuf, valbuf)
+     struct type *type;
+     char *regbuf;
+     char *valbuf;
+{
+  int b;
+  int len = TYPE_LENGTH (type);
+
+  for (b = 0; b < len; b += 2)
+    {
+      int todo = len - b;
+
+      if (todo > 2)
+	todo = 2;
+      memcpy (valbuf + b, regbuf + b, todo);
+    }
+}
+
+void
+write_return_value (type, valbuf)
+     struct type *type;
+     char *valbuf;
+{
+  int reg;
+  int len;
+
+  for (len = 0; len < TYPE_LENGTH (type); len += 2)
+    write_register_bytes (REGISTER_BYTE (len / 2  + 2), valbuf + len, 2);
+}
+
+void
+store_struct_return (addr, sp)
+     CORE_ADDR addr;
+     CORE_ADDR sp;
+{
+  write_register (2, addr);
+}
+
+
+void
+print_register_hook (regno)
+     int regno;
+{
+  if ((regno & 1) == 0 && regno < 16)
+    {
+      unsigned short l[2];
+
+      read_relative_register_raw_bytes (regno, (char *) (l + 0));
+      read_relative_register_raw_bytes (regno + 1, (char *) (l + 1));
+      printf_unfiltered ("\t");
+      printf_unfiltered ("%04x%04x", l[0], l[1]);
+    }
+
+  if ((regno & 3) == 0 && regno < 16)
+    {
+      unsigned short l[4];
+
+      read_relative_register_raw_bytes (regno, (char *) (l + 0));
+      read_relative_register_raw_bytes (regno + 1, (char *) (l + 1));
+      read_relative_register_raw_bytes (regno + 2, (char *) (l + 2));
+      read_relative_register_raw_bytes (regno + 3, (char *) (l + 3));
+
+      printf_unfiltered ("\t");
+      printf_unfiltered ("%04x%04x%04x%04x", l[0], l[1], l[2], l[3]);
+    }
+  if (regno == 15)
+    {
+      unsigned short rval;
+      int i;
+
+      read_relative_register_raw_bytes (regno, (char *) (&rval));
+
+      printf_unfiltered ("\n");
+      for (i = 0; i < 10; i += 2)
+	{
+	  printf_unfiltered ("(sp+%d=%04x)", i, read_memory_short (rval + i));
+	}
+    }
+
+}
+
+void
+z8k_pop_frame ()
+{
+}
+
+struct cmd_list_element *setmemorylist;
+
+void
+z8k_set_pointer_size (newsize)
+     int newsize;
+{
+  static int oldsize = 0;
+
+  if (oldsize != newsize)
+    {
+      printf_unfiltered ("pointer size set to %d bits\n", newsize);
+      oldsize = newsize;
+      if (newsize == 32)
+	{
+	  BIG = 1;
+	}
+      else
+	{
+	  BIG = 0;
+	}
+      _initialize_gdbtypes ();
+    }
+}
+
+static void
+segmented_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  z8k_set_pointer_size (32);
+}
+
+static void
+unsegmented_command (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  z8k_set_pointer_size (16);
+}
+
+static void
+set_memory (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  printf_unfiltered ("\"set memory\" must be followed by the name of a memory subcommand.\n");
+  help_list (setmemorylist, "set memory ", -1, gdb_stdout);
+}
+
+void
+_initialize_z8ktdep ()
+{
+  tm_print_insn = gdb_print_insn_z8k;
+
+  add_prefix_cmd ("memory", no_class, set_memory,
+		  "set the memory model", &setmemorylist, "set memory ", 0,
+		  &setlist);
+  add_cmd ("segmented", class_support, segmented_command,
+	   "Set segmented memory model.", &setmemorylist);
+  add_cmd ("unsegmented", class_support, unsegmented_command,
+	   "Set unsegmented memory model.", &setmemorylist);
+
+}